Merge branches 'consolidate-clksrc', 'consolidate-flash', 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index c17cd4b..1b777b9 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -328,8 +328,6 @@
- info on the magic SysRq key.
telephony/
- directory with info on telephony (e.g. voice over IP) support.
-uml/
- - directory with information about User Mode Linux.
unicode.txt
- info on the Unicode character/font mapping used in Linux.
unshare.txt
diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 0000000..06b62ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What: /sys/bus/bcma/devices/.../manuf
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ Each BCMA core has it's manufacturer id. See
+ include/linux/bcma/bcma.h for possible values.
+
+What: /sys/bus/bcma/devices/.../id
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ There are a few types of BCMA cores, they can be identified by
+ id field.
+
+What: /sys/bus/bcma/devices/.../rev
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ BCMA cores of the same type can still slightly differ depending
+ on their revision. Use it for detailed programming.
+
+What: /sys/bus/bcma/devices/.../class
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ Each BCMA core is identified by few fields, including class it
+ belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7564e88..e7be75b 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -183,21 +183,21 @@
to learn how to control the knobs.
-What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date: August 2008
+What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
+Date: August 2008
KernelVersion: 2.6.27
-Contact: mark.langsdorf@amd.com
-Description: These files exist in every cpu's cache index directories.
- There are currently 2 cache_disable_# files in each
- directory. Reading from these files on a supported
- processor will return that cache disable index value
- for that processor and node. Writing to one of these
- files will cause the specificed cache index to be disabled.
+Contact: discuss@x86-64.org
+Description: Disable L3 cache indices
- Currently, only AMD Family 10h Processors support cache index
- disable, and only for their L3 caches. See the BIOS and
- Kernel Developer's Guide at
- http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf
- for formatting information and other details on the
- cache index disable.
-Users: joachim.deguara@amd.com
+ These files exist in every CPU's cache/index3 directory. Each
+ cache_disable_{0,1} file corresponds to one disable slot which
+ can be used to disable a cache index. Reading from these files
+ on a processor with this functionality will return the currently
+ disabled index for that node. There is one L3 structure per
+ node, or per internal node on MCM machines. Writing a valid
+ index to one of these files will cause the specificed cache
+ index to be disabled.
+
+ All AMD processors with L3 caches provide this functionality.
+ For details, see BKDGs at
+ http://developer.amd.com/documentation/guides/Pages/default.aspx
diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi b/Documentation/ABI/testing/sysfs-firmware-dmi
index ba9da95..c78f9ab 100644
--- a/Documentation/ABI/testing/sysfs-firmware-dmi
+++ b/Documentation/ABI/testing/sysfs-firmware-dmi
@@ -14,14 +14,15 @@
DMI is structured as a large table of entries, where
each entry has a common header indicating the type and
- length of the entry, as well as 'handle' that is
- supposed to be unique amongst all entries.
+ length of the entry, as well as a firmware-provided
+ 'handle' that is supposed to be unique amongst all
+ entries.
Some entries are required by the specification, but many
others are optional. In general though, users should
never expect to find a specific entry type on their
system unless they know for certain what their firmware
- is doing. Machine to machine will vary.
+ is doing. Machine to machine experiences will vary.
Multiple entries of the same type are allowed. In order
to handle these duplicate entry types, each entry is
@@ -67,25 +68,24 @@
and the two terminating nul characters.
type : The type of the entry. This value is the same
as found in the directory name. It indicates
- how the rest of the entry should be
- interpreted.
+ how the rest of the entry should be interpreted.
instance: The instance ordinal of the entry for the
given type. This value is the same as found
in the parent directory name.
- position: The position of the entry within the entirety
- of the entirety.
+ position: The ordinal position (zero-based) of the entry
+ within the entirety of the DMI entry table.
=== Entry Specialization ===
Some entry types may have other information available in
- sysfs.
+ sysfs. Not all types are specialized.
--- Type 15 - System Event Log ---
This entry allows the firmware to export a log of
events the system has taken. This information is
typically backed by nvram, but the implementation
- details are abstracted by this table. This entries data
+ details are abstracted by this table. This entry's data
is exported in the directory:
/sys/firmware/dmi/entries/15-0/system_event_log
diff --git a/Documentation/ABI/testing/sysfs-firmware-gsmi b/Documentation/ABI/testing/sysfs-firmware-gsmi
new file mode 100644
index 0000000..0faa0aa
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-gsmi
@@ -0,0 +1,58 @@
+What: /sys/firmware/gsmi
+Date: March 2011
+Contact: Mike Waychison <mikew@google.com>
+Description:
+ Some servers used internally at Google have firmware
+ that provides callback functionality via explicit SMI
+ triggers. Some of the callbacks are similar to those
+ provided by the EFI runtime services page, but due to
+ historical reasons this different entry-point has been
+ used.
+
+ The gsmi driver implements the kernel's abstraction for
+ these firmware callbacks. Currently, this functionality
+ is limited to handling the system event log and getting
+ access to EFI-style variables stored in nvram.
+
+ Layout:
+
+ /sys/firmware/gsmi/vars:
+
+ This directory has the same layout (and
+ underlying implementation as /sys/firmware/efi/vars.
+ See Documentation/ABI/*/sysfs-firmware-efi-vars
+ for more information on how to interact with
+ this structure.
+
+ /sys/firmware/gsmi/append_to_eventlog - write-only:
+
+ This file takes a binary blob and passes it onto
+ the firmware to be timestamped and appended to
+ the system eventlog. The binary format is
+ interpreted by the firmware and may change from
+ platform to platform. The only kernel-enforced
+ requirement is that the blob be prefixed with a
+ 32bit host-endian type used as part of the
+ firmware call.
+
+ /sys/firmware/gsmi/clear_config - write-only:
+
+ Writing any value to this file will cause the
+ entire firmware configuration to be reset to
+ "factory defaults". Callers should assume that
+ a reboot is required for the configuration to be
+ cleared.
+
+ /sys/firmware/gsmi/clear_eventlog - write-only:
+
+ This file is used to clear out a portion/the
+ whole of the system event log. Values written
+ should be values between 1 and 100 inclusive (in
+ ASCII) representing the fraction of the log to
+ clear. Not all platforms support fractional
+ clearing though, and this writes to this file
+ will error out if the firmware doesn't like your
+ submitted fraction.
+
+ Callers should assume that a reboot is needed
+ for this operation to complete.
diff --git a/Documentation/ABI/testing/sysfs-firmware-log b/Documentation/ABI/testing/sysfs-firmware-log
new file mode 100644
index 0000000..9b58e7c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-log
@@ -0,0 +1,7 @@
+What: /sys/firmware/log
+Date: February 2011
+Contact: Mike Waychison <mikew@google.com>
+Description:
+ The /sys/firmware/log is a binary file that represents a
+ read-only copy of the firmware's log if one is
+ available.
diff --git a/Documentation/ABI/testing/sysfs-kernel-fscaps b/Documentation/ABI/testing/sysfs-kernel-fscaps
new file mode 100644
index 0000000..50a3033
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-fscaps
@@ -0,0 +1,8 @@
+What: /sys/kernel/fscaps
+Date: February 2011
+KernelVersion: 2.6.38
+Contact: Ludwig Nussel <ludwig.nussel@suse.de>
+Description
+ Shows whether file system capabilities are honored
+ when executing a binary
+
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 194ca44..b464d1276 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -158,3 +158,17 @@
successful, will make the kernel abort a subsequent transition
to a sleep state if any wakeup events are reported after the
write has returned.
+
+What: /sys/power/reserved_size
+Date: May 2011
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/reserved_size file allows user space to control
+ the amount of memory reserved for allocations made by device
+ drivers during the "device freeze" stage of hibernation. It can
+ be written a string representing a non-negative integer that
+ will be used as the amount of memory to reserve for allocations
+ made by device drivers' "freeze" callbacks, in bytes.
+
+ Reading from this file will display the current value, which is
+ set to 1 MB by default.
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 36f63d4..b638e50 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -96,10 +96,10 @@
<chapter id="devdrivers">
<title>Device drivers infrastructure</title>
+ <sect1><title>The Basic Device Driver-Model Structures </title>
+!Iinclude/linux/device.h
+ </sect1>
<sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
!Edrivers/base/driver.c
!Edrivers/base/core.c
!Edrivers/base/class.c
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index fb10fd0..b342234 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -191,8 +191,8 @@
<para>
Whenever an interrupt triggers, the lowlevel arch code calls into
the generic interrupt code by calling desc->handle_irq().
- This highlevel IRQ handling function only uses desc->chip primitives
- referenced by the assigned chip descriptor structure.
+ This highlevel IRQ handling function only uses desc->irq_data.chip
+ primitives referenced by the assigned chip descriptor structure.
</para>
</sect1>
<sect1 id="Highlevel_Driver_API">
@@ -206,11 +206,11 @@
<listitem><para>enable_irq()</para></listitem>
<listitem><para>disable_irq_nosync() (SMP only)</para></listitem>
<listitem><para>synchronize_irq() (SMP only)</para></listitem>
- <listitem><para>set_irq_type()</para></listitem>
- <listitem><para>set_irq_wake()</para></listitem>
- <listitem><para>set_irq_data()</para></listitem>
- <listitem><para>set_irq_chip()</para></listitem>
- <listitem><para>set_irq_chip_data()</para></listitem>
+ <listitem><para>irq_set_irq_type()</para></listitem>
+ <listitem><para>irq_set_irq_wake()</para></listitem>
+ <listitem><para>irq_set_handler_data()</para></listitem>
+ <listitem><para>irq_set_chip()</para></listitem>
+ <listitem><para>irq_set_chip_data()</para></listitem>
</itemizedlist>
See the autogenerated function documentation for details.
</para>
@@ -225,6 +225,8 @@
<listitem><para>handle_fasteoi_irq</para></listitem>
<listitem><para>handle_simple_irq</para></listitem>
<listitem><para>handle_percpu_irq</para></listitem>
+ <listitem><para>handle_edge_eoi_irq</para></listitem>
+ <listitem><para>handle_bad_irq</para></listitem>
</itemizedlist>
The interrupt flow handlers (either predefined or architecture
specific) are assigned to specific interrupts by the architecture
@@ -241,13 +243,13 @@
<programlisting>
default_enable(struct irq_data *data)
{
- desc->chip->irq_unmask(data);
+ desc->irq_data.chip->irq_unmask(data);
}
default_disable(struct irq_data *data)
{
if (!delay_disable(data))
- desc->chip->irq_mask(data);
+ desc->irq_data.chip->irq_mask(data);
}
default_ack(struct irq_data *data)
@@ -284,9 +286,9 @@
<para>
The following control flow is implemented (simplified excerpt):
<programlisting>
-desc->chip->irq_mask();
-handle_IRQ_event(desc->action);
-desc->chip->irq_unmask();
+desc->irq_data.chip->irq_mask_ack();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_unmask();
</programlisting>
</para>
</sect3>
@@ -300,8 +302,8 @@
<para>
The following control flow is implemented (simplified excerpt):
<programlisting>
-handle_IRQ_event(desc->action);
-desc->chip->irq_eoi();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_eoi();
</programlisting>
</para>
</sect3>
@@ -315,17 +317,17 @@
The following control flow is implemented (simplified excerpt):
<programlisting>
if (desc->status & running) {
- desc->chip->irq_mask();
+ desc->irq_data.chip->irq_mask_ack();
desc->status |= pending | masked;
return;
}
-desc->chip->irq_ack();
+desc->irq_data.chip->irq_ack();
desc->status |= running;
do {
if (desc->status & masked)
- desc->chip->irq_unmask();
+ desc->irq_data.chip->irq_unmask();
desc->status &= ~pending;
- handle_IRQ_event(desc->action);
+ handle_irq_event(desc->action);
} while (status & pending);
desc->status &= ~running;
</programlisting>
@@ -344,7 +346,7 @@
<para>
The following control flow is implemented (simplified excerpt):
<programlisting>
-handle_IRQ_event(desc->action);
+handle_irq_event(desc->action);
</programlisting>
</para>
</sect3>
@@ -362,12 +364,29 @@
<para>
The following control flow is implemented (simplified excerpt):
<programlisting>
-handle_IRQ_event(desc->action);
-if (desc->chip->irq_eoi)
- desc->chip->irq_eoi();
+if (desc->irq_data.chip->irq_ack)
+ desc->irq_data.chip->irq_ack();
+handle_irq_event(desc->action);
+if (desc->irq_data.chip->irq_eoi)
+ desc->irq_data.chip->irq_eoi();
</programlisting>
</para>
</sect3>
+ <sect3 id="EOI_Edge_IRQ_flow_handler">
+ <title>EOI Edge IRQ flow handler</title>
+ <para>
+ handle_edge_eoi_irq provides an abnomination of the edge
+ handler which is solely used to tame a badly wreckaged
+ irq controller on powerpc/cell.
+ </para>
+ </sect3>
+ <sect3 id="BAD_IRQ_flow_handler">
+ <title>Bad IRQ flow handler</title>
+ <para>
+ handle_bad_irq is used for spurious interrupts which
+ have no real handler assigned..
+ </para>
+ </sect3>
</sect2>
<sect2 id="Quirks_and_optimizations">
<title>Quirks and optimizations</title>
@@ -410,6 +429,7 @@
<listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
<listitem><para>irq_mask()</para></listitem>
<listitem><para>irq_unmask()</para></listitem>
+ <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
<listitem><para>irq_retrigger() - Optional</para></listitem>
<listitem><para>irq_set_type() - Optional</para></listitem>
<listitem><para>irq_set_wake() - Optional</para></listitem>
@@ -424,32 +444,24 @@
<chapter id="doirq">
<title>__do_IRQ entry point</title>
<para>
- The original implementation __do_IRQ() is an alternative entry
- point for all types of interrupts.
+ The original implementation __do_IRQ() was an alternative entry
+ point for all types of interrupts. It not longer exists.
</para>
<para>
This handler turned out to be not suitable for all
interrupt hardware and was therefore reimplemented with split
- functionality for egde/level/simple/percpu interrupts. This is not
+ functionality for edge/level/simple/percpu interrupts. This is not
only a functional optimization. It also shortens code paths for
interrupts.
</para>
- <para>
- To make use of the split implementation, replace the call to
- __do_IRQ by a call to desc->handle_irq() and associate
- the appropriate handler function to desc->handle_irq().
- In most cases the generic handler implementations should
- be sufficient.
- </para>
</chapter>
<chapter id="locking">
<title>Locking on SMP</title>
<para>
The locking of chip registers is up to the architecture that
- defines the chip primitives. There is a chip->lock field that can be used
- for serialization, but the generic layer does not touch it. The per-irq
- structure is protected via desc->lock, by the generic layer.
+ defines the chip primitives. The per-irq structure is
+ protected via desc->lock, by the generic layer.
</para>
</chapter>
<chapter id="structs">
diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX
index 71b6f50..1d7a885 100644
--- a/Documentation/RCU/00-INDEX
+++ b/Documentation/RCU/00-INDEX
@@ -21,7 +21,7 @@
RTFP.txt
- List of RCU papers (bibliography) going back to 1980.
stallwarn.txt
- - RCU CPU stall warnings (CONFIG_RCU_CPU_STALL_DETECTOR)
+ - RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress)
torture.txt
- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
trace.txt
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 862c08e..4e95920 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -1,22 +1,25 @@
Using RCU's CPU Stall Detector
-The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
-RCU's CPU stall detector, which detects conditions that unduly delay
-RCU grace periods. The stall detector's idea of what constitutes
-"unduly delayed" is controlled by a set of C preprocessor macros:
+The rcu_cpu_stall_suppress module parameter enables RCU's CPU stall
+detector, which detects conditions that unduly delay RCU grace periods.
+This module parameter enables CPU stall detection by default, but
+may be overridden via boot-time parameter or at runtime via sysfs.
+The stall detector's idea of what constitutes "unduly delayed" is
+controlled by a set of kernel configuration variables and cpp macros:
-RCU_SECONDS_TILL_STALL_CHECK
+CONFIG_RCU_CPU_STALL_TIMEOUT
- This macro defines the period of time that RCU will wait from
- the beginning of a grace period until it issues an RCU CPU
- stall warning. This time period is normally ten seconds.
+ This kernel configuration parameter defines the period of time
+ that RCU will wait from the beginning of a grace period until it
+ issues an RCU CPU stall warning. This time period is normally
+ ten seconds.
RCU_SECONDS_TILL_STALL_RECHECK
This macro defines the period of time that RCU will wait after
issuing a stall warning until it issues another stall warning
- for the same stall. This time period is normally set to thirty
- seconds.
+ for the same stall. This time period is normally set to three
+ times the check interval plus thirty seconds.
RCU_STALL_RAT_DELAY
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 6a8c73f..c078ad4 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -10,34 +10,46 @@
CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats
-These implementations of RCU provides five debugfs files under the
-top-level directory RCU: rcu/rcudata (which displays fields in struct
-rcu_data), rcu/rcudata.csv (which is a .csv spreadsheet version of
-rcu/rcudata), rcu/rcugp (which displays grace-period counters),
-rcu/rcuhier (which displays the struct rcu_node hierarchy), and
-rcu/rcu_pending (which displays counts of the reasons that the
-rcu_pending() function decided that there was core RCU work to do).
+These implementations of RCU provides several debugfs files under the
+top-level directory "rcu":
+
+rcu/rcudata:
+ Displays fields in struct rcu_data.
+rcu/rcudata.csv:
+ Comma-separated values spreadsheet version of rcudata.
+rcu/rcugp:
+ Displays grace-period counters.
+rcu/rcuhier:
+ Displays the struct rcu_node hierarchy.
+rcu/rcu_pending:
+ Displays counts of the reasons rcu_pending() decided that RCU had
+ work to do.
+rcu/rcutorture:
+ Displays rcutorture test progress.
+rcu/rcuboost:
+ Displays RCU boosting statistics. Only present if
+ CONFIG_RCU_BOOST=y.
The output of "cat rcu/rcudata" looks as follows:
rcu_sched:
- 0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
- 1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
- 2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
- 3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
- 4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
- 5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
- 6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
- 7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
+ 0 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=545/1/0 df=50 of=0 ri=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0
+ 1 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=967/1/0 df=58 of=0 ri=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0
+ 2 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1081/1/0 df=175 of=0 ri=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0
+ 3 c=20942 g=20943 pq=1 pqc=20942 qp=1 dt=1846/0/0 df=404 of=0 ri=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0
+ 4 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=369/1/0 df=83 of=0 ri=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0
+ 5 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=381/1/0 df=64 of=0 ri=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0
+ 6 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1037/1/0 df=183 of=0 ri=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0
+ 7 c=20897 g=20897 pq=1 pqc=20896 qp=0 dt=1572/0/0 df=382 of=0 ri=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0
rcu_bh:
- 0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
- 1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
- 2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
- 3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
- 4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
- 5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
- 6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
- 7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+ 0 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=545/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0
+ 1 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=967/1/0 df=3 of=0 ri=1 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0
+ 2 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1081/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0
+ 3 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1846/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0
+ 4 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=369/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0
+ 5 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=381/1/0 df=4 of=0 ri=1 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0
+ 6 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1037/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0
+ 7 c=1474 g=1474 pq=1 pqc=1473 qp=0 dt=1572/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0
The first section lists the rcu_data structures for rcu_sched, the second
for rcu_bh. Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
@@ -52,17 +64,18 @@
substantially larger than the number of actual CPUs.
o "c" is the count of grace periods that this CPU believes have
- completed. CPUs in dynticks idle mode may lag quite a ways
- behind, for example, CPU 4 under "rcu_sched" above, which has
- slept through the past 25 RCU grace periods. It is not unusual
- to see CPUs lagging by thousands of grace periods.
+ completed. Offlined CPUs and CPUs in dynticks idle mode may
+ lag quite a ways behind, for example, CPU 6 under "rcu_sched"
+ above, which has been offline through not quite 40,000 RCU grace
+ periods. It is not unusual to see CPUs lagging by thousands of
+ grace periods.
o "g" is the count of grace periods that this CPU believes have
- started. Again, CPUs in dynticks idle mode may lag behind.
- If the "c" and "g" values are equal, this CPU has already
- reported a quiescent state for the last RCU grace period that
- it is aware of, otherwise, the CPU believes that it owes RCU a
- quiescent state.
+ started. Again, offlined CPUs and CPUs in dynticks idle mode
+ may lag behind. If the "c" and "g" values are equal, this CPU
+ has already reported a quiescent state for the last RCU grace
+ period that it is aware of, otherwise, the CPU believes that it
+ owes RCU a quiescent state.
o "pq" indicates that this CPU has passed through a quiescent state
for the current grace period. It is possible for "pq" to be
@@ -81,7 +94,8 @@
the next grace period!
o "qp" indicates that RCU still expects a quiescent state from
- this CPU.
+ this CPU. Offlined CPUs and CPUs in dyntick idle mode might
+ well have qp=1, which is OK: RCU is still ignoring them.
o "dt" is the current value of the dyntick counter that is incremented
when entering or leaving dynticks idle state, either by the
@@ -108,7 +122,7 @@
o "of" is the number of times that some other CPU has forced a
quiescent state on behalf of this CPU due to this CPU being
- offline. In a perfect world, this might neve happen, but it
+ offline. In a perfect world, this might never happen, but it
turns out that offlining and onlining a CPU can take several grace
periods, and so there is likely to be an extended period of time
when RCU believes that the CPU is online when it really is not.
@@ -125,6 +139,62 @@
of what state they are in (new, waiting for grace period to
start, waiting for grace period to end, ready to invoke).
+o "qs" gives an indication of the state of the callback queue
+ with four characters:
+
+ "N" Indicates that there are callbacks queued that are not
+ ready to be handled by the next grace period, and thus
+ will be handled by the grace period following the next
+ one.
+
+ "R" Indicates that there are callbacks queued that are
+ ready to be handled by the next grace period.
+
+ "W" Indicates that there are callbacks queued that are
+ waiting on the current grace period.
+
+ "D" Indicates that there are callbacks queued that have
+ already been handled by a prior grace period, and are
+ thus waiting to be invoked. Note that callbacks in
+ the process of being invoked are not counted here.
+ Callbacks in the process of being invoked are those
+ that have been removed from the rcu_data structures
+ queues by rcu_do_batch(), but which have not yet been
+ invoked.
+
+ If there are no callbacks in a given one of the above states,
+ the corresponding character is replaced by ".".
+
+o "kt" is the per-CPU kernel-thread state. The digit preceding
+ the first slash is zero if there is no work pending and 1
+ otherwise. The character between the first pair of slashes is
+ as follows:
+
+ "S" The kernel thread is stopped, in other words, all
+ CPUs corresponding to this rcu_node structure are
+ offline.
+
+ "R" The kernel thread is running.
+
+ "W" The kernel thread is waiting because there is no work
+ for it to do.
+
+ "O" The kernel thread is waiting because it has been
+ forced off of its designated CPU or because its
+ ->cpus_allowed mask permits it to run on other than
+ its designated CPU.
+
+ "Y" The kernel thread is yielding to avoid hogging CPU.
+
+ "?" Unknown value, indicates a bug.
+
+ The number after the final slash is the CPU that the kthread
+ is actually running on.
+
+o "ktl" is the low-order 16 bits (in hexadecimal) of the count of
+ the number of times that this CPU's per-CPU kthread has gone
+ through its loop servicing invoke_rcu_cpu_kthread() requests.
+
o "b" is the batch limit for this CPU. If more than this number
of RCU callbacks is ready to invoke, then the remainder will
be deferred.
@@ -174,14 +244,14 @@
The output of "cat rcu/rcuhier" looks as follows, with very long lines:
c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 .>. 0:127 ^0
-3/3 .>. 0:35 ^0 0/0 .>. 36:71 ^1 0/0 .>. 72:107 ^2 0/0 .>. 108:127 ^3
-3/3f .>. 0:5 ^0 2/3 .>. 6:11 ^1 0/0 .>. 12:17 ^2 0/0 .>. 18:23 ^3 0/0 .>. 24:29 ^4 0/0 .>. 30:35 ^5 0/0 .>. 36:41 ^0 0/0 .>. 42:47 ^1 0/0 .>. 48:53 ^2 0/0 .>. 54:59 ^3 0/0 .>. 60:65 ^4 0/0 .>. 66:71 ^5 0/0 .>. 72:77 ^0 0/0 .>. 78:83 ^1 0/0 .>. 84:89 ^2 0/0 .>. 90:95 ^3 0/0 .>. 96:101 ^4 0/0 .>. 102:107 ^5 0/0 .>. 108:113 ^0 0/0 .>. 114:119 ^1 0/0 .>. 120:125 ^2 0/0 .>. 126:127 ^3
+1/1 ..>. 0:127 ^0
+3/3 ..>. 0:35 ^0 0/0 ..>. 36:71 ^1 0/0 ..>. 72:107 ^2 0/0 ..>. 108:127 ^3
+3/3f ..>. 0:5 ^0 2/3 ..>. 6:11 ^1 0/0 ..>. 12:17 ^2 0/0 ..>. 18:23 ^3 0/0 ..>. 24:29 ^4 0/0 ..>. 30:35 ^5 0/0 ..>. 36:41 ^0 0/0 ..>. 42:47 ^1 0/0 ..>. 48:53 ^2 0/0 ..>. 54:59 ^3 0/0 ..>. 60:65 ^4 0/0 ..>. 66:71 ^5 0/0 ..>. 72:77 ^0 0/0 ..>. 78:83 ^1 0/0 ..>. 84:89 ^2 0/0 ..>. 90:95 ^3 0/0 ..>. 96:101 ^4 0/0 ..>. 102:107 ^5 0/0 ..>. 108:113 ^0 0/0 ..>. 114:119 ^1 0/0 ..>. 120:125 ^2 0/0 ..>. 126:127 ^3
rcu_bh:
c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 .>. 0:127 ^0
-0/3 .>. 0:35 ^0 0/0 .>. 36:71 ^1 0/0 .>. 72:107 ^2 0/0 .>. 108:127 ^3
-0/3f .>. 0:5 ^0 0/3 .>. 6:11 ^1 0/0 .>. 12:17 ^2 0/0 .>. 18:23 ^3 0/0 .>. 24:29 ^4 0/0 .>. 30:35 ^5 0/0 .>. 36:41 ^0 0/0 .>. 42:47 ^1 0/0 .>. 48:53 ^2 0/0 .>. 54:59 ^3 0/0 .>. 60:65 ^4 0/0 .>. 66:71 ^5 0/0 .>. 72:77 ^0 0/0 .>. 78:83 ^1 0/0 .>. 84:89 ^2 0/0 .>. 90:95 ^3 0/0 .>. 96:101 ^4 0/0 .>. 102:107 ^5 0/0 .>. 108:113 ^0 0/0 .>. 114:119 ^1 0/0 .>. 120:125 ^2 0/0 .>. 126:127 ^3
+0/1 ..>. 0:127 ^0
+0/3 ..>. 0:35 ^0 0/0 ..>. 36:71 ^1 0/0 ..>. 72:107 ^2 0/0 ..>. 108:127 ^3
+0/3f ..>. 0:5 ^0 0/3 ..>. 6:11 ^1 0/0 ..>. 12:17 ^2 0/0 ..>. 18:23 ^3 0/0 ..>. 24:29 ^4 0/0 ..>. 30:35 ^5 0/0 ..>. 36:41 ^0 0/0 ..>. 42:47 ^1 0/0 ..>. 48:53 ^2 0/0 ..>. 54:59 ^3 0/0 ..>. 60:65 ^4 0/0 ..>. 66:71 ^5 0/0 ..>. 72:77 ^0 0/0 ..>. 78:83 ^1 0/0 ..>. 84:89 ^2 0/0 ..>. 90:95 ^3 0/0 ..>. 96:101 ^4 0/0 ..>. 102:107 ^5 0/0 ..>. 108:113 ^0 0/0 ..>. 114:119 ^1 0/0 ..>. 120:125 ^2 0/0 ..>. 126:127 ^3
This is once again split into "rcu_sched" and "rcu_bh" portions,
and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
@@ -240,13 +310,20 @@
current grace period.
o The characters separated by the ">" indicate the state
- of the blocked-tasks lists. A "T" preceding the ">"
+ of the blocked-tasks lists. A "G" preceding the ">"
indicates that at least one task blocked in an RCU
read-side critical section blocks the current grace
- period, while a "." preceding the ">" indicates otherwise.
- The character following the ">" indicates similarly for
- the next grace period. A "T" should appear in this
- field only for rcu-preempt.
+ period, while a "E" preceding the ">" indicates that
+ at least one task blocked in an RCU read-side critical
+ section blocks the current expedited grace period.
+ A "T" character following the ">" indicates that at
+ least one task is blocked within an RCU read-side
+ critical section, regardless of whether any current
+ grace period (expedited or normal) is inconvenienced.
+ A "." character appears if the corresponding condition
+ does not hold, so that "..>." indicates that no tasks
+ are blocked. In contrast, "GE>T" indicates maximal
+ inconvenience from blocked tasks.
o The numbers separated by the ":" are the range of CPUs
served by this struct rcu_node. This can be helpful
@@ -328,6 +405,113 @@
is due to short-circuit evaluation in rcu_pending().
+The output of "cat rcu/rcutorture" looks as follows:
+
+rcutorture test sequence: 0 (test in progress)
+rcutorture update version number: 615
+
+The first line shows the number of rcutorture tests that have completed
+since boot. If a test is currently running, the "(test in progress)"
+string will appear as shown above. The second line shows the number of
+update cycles that the current test has started, or zero if there is
+no test in progress.
+
+
+The output of "cat rcu/rcuboost" looks as follows:
+
+0:5 tasks=.... kt=W ntb=0 neb=0 nnb=0 j=2f95 bt=300f
+ balk: nt=0 egt=989 bt=0 nb=0 ny=0 nos=16
+6:7 tasks=.... kt=W ntb=0 neb=0 nnb=0 j=2f95 bt=300f
+ balk: nt=0 egt=225 bt=0 nb=0 ny=0 nos=6
+
+This information is output only for rcu_preempt. Each two-line entry
+corresponds to a leaf rcu_node strcuture. The fields are as follows:
+
+o "n:m" is the CPU-number range for the corresponding two-line
+ entry. In the sample output above, the first entry covers
+ CPUs zero through five and the second entry covers CPUs 6
+ and 7.
+
+o "tasks=TNEB" gives the state of the various segments of the
+ rnp->blocked_tasks list:
+
+ "T" This indicates that there are some tasks that blocked
+ while running on one of the corresponding CPUs while
+ in an RCU read-side critical section.
+
+ "N" This indicates that some of the blocked tasks are preventing
+ the current normal (non-expedited) grace period from
+ completing.
+
+ "E" This indicates that some of the blocked tasks are preventing
+ the current expedited grace period from completing.
+
+ "B" This indicates that some of the blocked tasks are in
+ need of RCU priority boosting.
+
+ Each character is replaced with "." if the corresponding
+ condition does not hold.
+
+o "kt" is the state of the RCU priority-boosting kernel
+ thread associated with the corresponding rcu_node structure.
+ The state can be one of the following:
+
+ "S" The kernel thread is stopped, in other words, all
+ CPUs corresponding to this rcu_node structure are
+ offline.
+
+ "R" The kernel thread is running.
+
+ "W" The kernel thread is waiting because there is no work
+ for it to do.
+
+ "Y" The kernel thread is yielding to avoid hogging CPU.
+
+ "?" Unknown value, indicates a bug.
+
+o "ntb" is the number of tasks boosted.
+
+o "neb" is the number of tasks boosted in order to complete an
+ expedited grace period.
+
+o "nnb" is the number of tasks boosted in order to complete a
+ normal (non-expedited) grace period. When boosting a task
+ that was blocking both an expedited and a normal grace period,
+ it is counted against the expedited total above.
+
+o "j" is the low-order 16 bits of the jiffies counter in
+ hexadecimal.
+
+o "bt" is the low-order 16 bits of the value that the jiffies
+ counter will have when we next start boosting, assuming that
+ the current grace period does not end beforehand. This is
+ also in hexadecimal.
+
+o "balk: nt" counts the number of times we didn't boost (in
+ other words, we balked) even though it was time to boost because
+ there were no blocked tasks to boost. This situation occurs
+ when there is one blocked task on one rcu_node structure and
+ none on some other rcu_node structure.
+
+o "egt" counts the number of times we balked because although
+ there were blocked tasks, none of them were blocking the
+ current grace period, whether expedited or otherwise.
+
+o "bt" counts the number of times we balked because boosting
+ had already been initiated for the current grace period.
+
+o "nb" counts the number of times we balked because there
+ was at least one task blocking the current non-expedited grace
+ period that never had blocked. If it is already running, it
+ just won't help to boost its priority!
+
+o "ny" counts the number of times we balked because it was
+ not yet time to start boosting.
+
+o "nos" counts the number of times we balked for other
+ reasons, e.g., the grace period ended first.
+
+
CONFIG_TINY_RCU and CONFIG_TINY_PREEMPT_RCU debugfs Files and Formats
These implementations of RCU provides a single debugfs file under the
@@ -394,9 +578,9 @@
o "nnb" is the number of normal grace periods that have had
to resort to RCU priority boosting since boot.
-o "j" is the low-order 12 bits of the jiffies counter in hexadecimal.
+o "j" is the low-order 16 bits of the jiffies counter in hexadecimal.
-o "bt" is the low-order 12 bits of the value that the jiffies counter
+o "bt" is the low-order 16 bits of the value that the jiffies counter
will have at the next time that boosting is scheduled to begin.
o In the line beginning with "normal balk", the fields are as follows:
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
new file mode 100644
index 0000000..bf57ecd
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -0,0 +1,397 @@
+=====================================================================
+SEC 4 Device Tree Binding
+Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+
+ CONTENTS
+ -Overview
+ -SEC 4 Node
+ -Job Ring Node
+ -Run Time Integrity Check (RTIC) Node
+ -Run Time Integrity Check (RTIC) Memory Node
+ -Secure Non-Volatile Storage (SNVS) Node
+ -Full Example
+
+NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+Accelerator and Assurance Module (CAAM).
+
+=====================================================================
+Overview
+
+DESCRIPTION
+
+SEC 4 h/w can process requests from 2 types of sources.
+1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+2. Job Rings (HW interface between cores & SEC 4 registers).
+
+High Speed Data Path Configuration:
+
+HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+such as the P4080. The number of simultaneous dequeues the QI can make is
+equal to the number of Descriptor Controller (DECO) engines in a particular
+SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+dequeue from 5 subportals simultaneously.
+
+Job Ring Data Path Configuration:
+
+Each JR is located on a separate 4k page, they may (or may not) be made visible
+in the memory partition devoted to a particular core. The P4080 has 4 JRs, so
+up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+=====================================================================
+SEC 4 Node
+
+Description
+
+ Node defines the base address of the SEC 4 block.
+ This block specifies the address range of all global
+ configuration registers for the SEC 4 block. It
+ also receives interrupts from the Run Time Integrity Check
+ (RTIC) function within the SEC 4 block.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v4.0"
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing the size of physical addresses in
+ child nodes.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ address and length of the SEC4 configuration registers.
+ registers
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the SEC 4.0 register space (-SNVS not included). A
+ triplet that includes the child address, parent address, &
+ length.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - interrupt-parent
+ Usage: (required if interrupt property is defined)
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped.
+
+ Note: All other standard properties (see the ePAPR) are allowed
+ but are optional.
+
+
+EXAMPLE
+ crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2>;
+ };
+
+=====================================================================
+Job Ring (JR) Node
+
+ Child of the crypto node defines data processing interface to SEC 4
+ across the peripheral bus for purposes of processing
+ cryptographic descriptors. The specified address
+ range can be made visible to one (or more) cores.
+ The interrupt defined for this node is controlled within
+ the address range of this node.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v4.0-job-ring"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Specifies a two JR parameters: an offset from
+ the parent physical address and the length the JR registers.
+
+ - fsl,liodn
+ Usage: optional-but-recommended
+ Value type: <prop-encoded-array>
+ Definition:
+ Specifies the LIODN to be used in conjunction with
+ the ppid-to-liodn table that specifies the PPID to LIODN mapping.
+ Needed if the PAMU is used. Value is a 12 bit value
+ where value is a LIODN ID for this JR. This property is
+ normally set by boot firmware.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - interrupt-parent
+ Usage: (required if interrupt property is defined)
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped.
+
+EXAMPLE
+ jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ fsl,liodn = <0x081>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2>;
+ };
+
+
+=====================================================================
+Run Time Integrity Check (RTIC) Node
+
+ Child node of the crypto node. Defines a register space that
+ contains up to 5 sets of addresses and their lengths (sizes) that
+ will be checked at run time. After an initial hash result is
+ calculated, these addresses are checked by HW to monitor any
+ change. If any memory is modified, a Security Violation is
+ triggered (see SNVS definition).
+
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v4.0-rtic".
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing physical addresses in child nodes. Must
+ have a value of 1.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing the size of physical addresses in
+ child nodes. Must have a value of 1.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies a two parameters:
+ an offset from the parent physical address and the length
+ the SEC4 registers.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the SEC 4 register space (-SNVS not included). A
+ triplet that includes the child address, parent address, &
+ length.
+
+EXAMPLE
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+ };
+
+=====================================================================
+Run Time Integrity Check (RTIC) Memory Node
+ A child node that defines individual RTIC memory regions that are used to
+ perform run-time integrity check of memory areas that should not modified.
+ The node defines a register that contains the memory address &
+ length (combined) and a second register that contains the hash result
+ in big endian format.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v4.0-rtic-memory".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies two parameters:
+ an offset from the parent physical address and the length:
+
+ 1. The location of the RTIC memory address & length registers.
+ 2. The location RTIC hash result.
+
+ - fsl,rtic-region
+ Usage: optional-but-recommended
+ Value type: <prop-encoded-array>
+ Definition:
+ Specifies the HW address (36 bit address) for this region
+ followed by the length of the HW partition to be checked;
+ the address is represented as a 64 bit quantity followed
+ by a 32 bit length.
+
+ - fsl,liodn
+ Usage: optional-but-recommended
+ Value type: <prop-encoded-array>
+ Definition:
+ Specifies the LIODN to be used in conjunction with
+ the ppid-to-liodn table that specifies the PPID to LIODN
+ mapping. Needed if the PAMU is used. Value is a 12 bit value
+ where value is a LIODN ID for this RTIC memory region. This
+ property is normally set by boot firmware.
+
+EXAMPLE
+ rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ fsl,liodn = <0x03c>;
+ fsl,rtic-region = <0x12345678 0x12345678 0x12345678>;
+ };
+
+=====================================================================
+Secure Non-Volatile Storage (SNVS) Node
+
+ Node defines address range and the associated
+ interrupt for the SNVS function. This function
+ monitors security state information & reports
+ security violations.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v4.0-mon".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ address and length of the SEC4 configuration
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - interrupt-parent
+ Usage: (required if interrupt property is defined)
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped.
+
+EXAMPLE
+ sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2>;
+ };
+
+=====================================================================
+FULL EXAMPLE
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <89 2>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <90 2>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <91 2>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2>;
+ };
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
new file mode 100755
index 0000000..1a729f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -0,0 +1,61 @@
+CAN Device Tree Bindings
+------------------------
+2011 Freescale Semiconductor, Inc.
+
+fsl,flexcan-v1.0 nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller.
+
+CPI Clock- Can Protocol Interface Clock
+ This CLK_SRC bit of CTRL(control register) selects the clock source to
+ the CAN Protocol Interface(CPI) to be either the peripheral clock
+ (driven by the PLL) or the crystal oscillator clock. The selected clock
+ is the one fed to the prescaler to generate the Serial Clock (Sclock).
+ The PRESDIV field of CTRL(control register) controls a prescaler that
+ generates the Serial Clock (Sclock), whose period defines the
+ time quantum used to compose the CAN waveform.
+
+Can Engine Clock Source
+ There are two sources for CAN clock
+ - Platform Clock It represents the bus clock
+ - Oscillator Clock
+
+ Peripheral Clock (PLL)
+ --------------
+ |
+ --------- -------------
+ | |CPI Clock | Prescaler | Sclock
+ | |---------------->| (1.. 256) |------------>
+ --------- -------------
+ | |
+ -------------- ---------------------CLK_SRC
+ Oscillator Clock
+
+- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
+ the peripheral clock. PLL clock is fed to the
+ prescaler to generate the Serial Clock (Sclock).
+ Valid values are "oscillator" and "platform"
+ "oscillator": CAN engine clock source is oscillator clock.
+ "platform" The CAN engine clock source is the bus clock
+ (platform clock).
+
+- fsl,flexcan-clock-divider : for the reference and system clock, an additional
+ clock divider can be specified.
+- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+
+Note:
+ - v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
+ - P1010 does not have oscillator as the Clock Source.So the default
+ Clock Source is platform clock.
+Examples:
+
+ can0@1c000 {
+ compatible = "fsl,flexcan-v1.0";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2>;
+ interrupt-parent = <&mpic>;
+ fsl,flexcan-clock-source = "platform";
+ fsl,flexcan-clock-divider = <2>;
+ clock-frequency = <fixed by u-boot>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt
new file mode 100644
index 0000000..939a26d
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt
@@ -0,0 +1,76 @@
+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+ flash controller can be found in the IFC_REV register at
+ offset zero.
+
+- #address-cells : Should be either two or three. The first cell is the
+ chipselect number, and the remaining cells are the
+ offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+ can be.
+- reg : Offset and length of the register set for the device
+- interrupts : IFC has two interrupts. The first one is the "common"
+ interrupt(CM_EVTER_STAT), and second is the NAND interrupt
+ (NAND_EVTER_STAT).
+
+- ranges : Each range corresponds to a single chipselect, and covers
+ the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+ ifc@ffe1e000 {
+ compatible = "fsl,ifc", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+ interrupts = <16 2 19 2>;
+
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xffa00000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* 32MB for user data */
+ reg = <0x0 0x02000000>;
+ label = "NOR Data";
+ };
+ };
+
+ flash@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x000001f>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
new file mode 100644
index 0000000..df41958
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
@@ -0,0 +1,38 @@
+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions. The first is the main timer register bank
+ (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx). The second is the timer control
+ register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+ timer interrupts can be used. This property is optional; without this,
+ all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+ with timer zero. If timer-available-ranges is present, only the
+ interrupts that correspond to available timers shall be present.
+
+Example:
+ /* Note that this requires #interrupt-cells to be 4 */
+ timer0: timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+
+ /* Another AMP partition is using timers 0 and 1 */
+ fsl,available-ranges = <2 2>;
+
+ interrupts = <2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer1: timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
index 4f61458..2cf38bd 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
@@ -190,7 +190,7 @@
*/
timer0: timer@41100 {
compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100>;
+ reg = <0x41100 0x100 0x41300 4>;
interrupts = <0 0 3 0
1 0 3 0
2 0 3 0
diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.txt
index 5001b75..6754b2d 100644
--- a/Documentation/driver-model/bus.txt
+++ b/Documentation/driver-model/bus.txt
@@ -3,24 +3,7 @@
Definition
~~~~~~~~~~
-
-struct bus_type {
- char * name;
-
- struct subsystem subsys;
- struct kset drivers;
- struct kset devices;
-
- struct bus_attribute * bus_attrs;
- struct device_attribute * dev_attrs;
- struct driver_attribute * drv_attrs;
-
- int (*match)(struct device * dev, struct device_driver * drv);
- int (*hotplug) (struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size);
- int (*suspend)(struct device * dev, pm_message_t state);
- int (*resume)(struct device * dev);
-};
+See the kerneldoc for the struct bus_type.
int bus_register(struct bus_type * bus);
diff --git a/Documentation/driver-model/class.txt b/Documentation/driver-model/class.txt
index 548505f..1fefc48 100644
--- a/Documentation/driver-model/class.txt
+++ b/Documentation/driver-model/class.txt
@@ -27,22 +27,7 @@
typedef int (*devclass_add)(struct device *);
typedef void (*devclass_remove)(struct device *);
-struct device_class {
- char * name;
- rwlock_t lock;
- u32 devnum;
- struct list_head node;
-
- struct list_head drivers;
- struct list_head intf_list;
-
- struct driver_dir_entry dir;
- struct driver_dir_entry device_dir;
- struct driver_dir_entry driver_dir;
-
- devclass_add add_device;
- devclass_remove remove_device;
-};
+See the kerneldoc for the struct class.
A typical device class definition would look like:
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index a124f31..b2ff426 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -2,96 +2,7 @@
The Basic Device Structure
~~~~~~~~~~~~~~~~~~~~~~~~~~
-struct device {
- struct list_head g_list;
- struct list_head node;
- struct list_head bus_list;
- struct list_head driver_list;
- struct list_head intf_list;
- struct list_head children;
- struct device * parent;
-
- char name[DEVICE_NAME_SIZE];
- char bus_id[BUS_ID_SIZE];
-
- spinlock_t lock;
- atomic_t refcount;
-
- struct bus_type * bus;
- struct driver_dir_entry dir;
-
- u32 class_num;
-
- struct device_driver *driver;
- void *driver_data;
- void *platform_data;
-
- u32 current_state;
- unsigned char *saved_state;
-
- void (*release)(struct device * dev);
-};
-
-Fields
-~~~~~~
-g_list: Node in the global device list.
-
-node: Node in device's parent's children list.
-
-bus_list: Node in device's bus's devices list.
-
-driver_list: Node in device's driver's devices list.
-
-intf_list: List of intf_data. There is one structure allocated for
- each interface that the device supports.
-
-children: List of child devices.
-
-parent: *** FIXME ***
-
-name: ASCII description of device.
- Example: " 3Com Corporation 3c905 100BaseTX [Boomerang]"
-
-bus_id: ASCII representation of device's bus position. This
- field should be a name unique across all devices on the
- bus type the device belongs to.
-
- Example: PCI bus_ids are in the form of
- <bus number>:<slot number>.<function number>
- This name is unique across all PCI devices in the system.
-
-lock: Spinlock for the device.
-
-refcount: Reference count on the device.
-
-bus: Pointer to struct bus_type that device belongs to.
-
-dir: Device's sysfs directory.
-
-class_num: Class-enumerated value of the device.
-
-driver: Pointer to struct device_driver that controls the device.
-
-driver_data: Driver-specific data.
-
-platform_data: Platform data specific to the device.
-
- Example: for devices on custom boards, as typical of embedded
- and SOC based hardware, Linux often uses platform_data to point
- to board-specific structures describing devices and how they
- are wired. That can include what ports are available, chip
- variants, which GPIO pins act in what additional roles, and so
- on. This shrinks the "Board Support Packages" (BSPs) and
- minimizes board-specific #ifdefs in drivers.
-
-current_state: Current power state of the device.
-
-saved_state: Pointer to saved state of the device. This is usable by
- the device driver controlling the device.
-
-release: Callback to free the device after all references have
- gone away. This should be set by the allocator of the
- device (i.e. the bus driver that discovered the device).
+See the kerneldoc for the struct device.
Programming Interface
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index d2cd6fb..4421135 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -1,23 +1,7 @@
Device Drivers
-struct device_driver {
- char * name;
- struct bus_type * bus;
-
- struct completion unloaded;
- struct kobject kobj;
- list_t devices;
-
- struct module *owner;
-
- int (*probe) (struct device * dev);
- int (*remove) (struct device * dev);
-
- int (*suspend) (struct device * dev, pm_message_t state);
- int (*resume) (struct device * dev);
-};
-
+See the kerneldoc for the struct device_driver.
Allocation
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 492e81d..4cba260 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -35,17 +35,6 @@
---------------------------
-What: AR9170USB
-When: 2.6.40
-
-Why: This driver is deprecated and the firmware is no longer
- maintained. The replacement driver "carl9170" has been
- around for a while, so the devices are still supported.
-
-Who: Christian Lamparter <chunkeey@googlemail.com>
-
----------------------------
-
What: IRQF_SAMPLE_RANDOM
Check: IRQF_SAMPLE_RANDOM
When: July 2009
@@ -405,16 +394,6 @@
----------------------------
-What: capifs
-When: February 2011
-Files: drivers/isdn/capi/capifs.*
-Why: udev fully replaces this special file system that only contains CAPI
- NCCI TTY device nodes. User space (pppdcapiplugin) works without
- noticing the difference.
-Who: Jan Kiszka <jan.kiszka@web.de>
-
-----------------------------
-
What: KVM paravirt mmu host support
When: January 2011
Why: The paravirt mmu host support is slower than non-paravirt mmu, both
@@ -460,14 +439,6 @@
----------------------------
-What: The acpi_sleep=s4_nonvs command line option
-When: 2.6.37
-Files: arch/x86/kernel/acpi/sleep.c
-Why: superseded by acpi_sleep=nonvs
-Who: Rafael J. Wysocki <rjw@sisk.pl>
-
-----------------------------
-
What: PCI DMA unmap state API
When: August 2012
Why: PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index b0b814d..60740e8 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -836,7 +836,6 @@
TASKLET: 0 0 0 290
SCHED: 27035 26983 26971 26746
HRTIMER: 0 0 0 0
- RCU: 1678 1769 2178 2250
1.3 IDE devices in /proc/ide
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index cb8a3a0..df904ae 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -66,10 +66,10 @@
entering atomic context, using:
int flex_array_prealloc(struct flex_array *array, unsigned int start,
- unsigned int end, gfp_t flags);
+ unsigned int nr_elements, gfp_t flags);
This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated. Thereafter, a
+defined by start and nr_elements has been allocated. Thereafter, a
flex_array_put() call on an element in that range is guaranteed not to
block.
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index b63301a..050d37f 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -11,14 +11,14 @@
fork. So if you have any comments or updates for this file, please try
to update the original English file first.
-Last Updated: 2008/10/24
+Last Updated: 2011/03/31
==================================
これは、
-linux-2.6.28/Documentation/HOWTO
+linux-2.6.38/Documentation/HOWTO
の和訳です。
翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/10/24
+翻訳日： 2011/3/28
翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
校正者： 松倉さん <nbh--mats at nifty dot com>
小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -256,8 +256,8 @@
- メインの 2.6.x カーネルツリー
- 2.6.x.y -stable カーネルツリー
- 2.6.x -git カーネルパッチ
- - 2.6.x -mm カーネルパッチ
- サブシステム毎のカーネルツリーとパッチ
+ - 統合テストのための 2.6.x -next カーネルツリー
2.6.x カーネルツリー
-----------------
@@ -268,9 +268,9 @@
- 新しいカーネルがリリースされた直後に、2週間の特別期間が設けられ、
この期間中に、メンテナ達は Linus に大きな差分を送ることができます。
- このような差分は通常 -mm カーネルに数週間含まれてきたパッチです。
+ このような差分は通常 -next カーネルに数週間含まれてきたパッチです。
大きな変更は git(カーネルのソース管理ツール、詳細は
- http://git.or.cz/ 参照) を使って送るのが好ましいやり方ですが、パッ
+ http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ
チファイルの形式のまま送るのでも十分です。
- 2週間後、-rc1 カーネルがリリースされ、この後にはカーネル全体の安定
@@ -333,86 +333,44 @@
れは -rc カーネルと比べて、パッチが大丈夫かどうかも確認しないで自動的
に生成されるので、より実験的です。
-2.6.x -mm カーネルパッチ
-------------------------
-
-Andrew Morton によってリリースされる実験的なカーネルパッチ群です。
-Andrew は個別のサブシステムカーネルツリーとパッチを全て集めてきて
-linux-kernel メーリングリストで収集された多数のパッチと同時に一つにま
-とめます。
-このツリーは新機能とパッチが検証される場となります。ある期間の間パッチ
-が -mm に入って価値を証明されたら、Andrew やサブシステムメンテナが、
-メインラインへ入れるように Linus にプッシュします。
-
-メインカーネルツリーに含めるために Linus に送る前に、すべての新しいパッ
-チが -mm ツリーでテストされることが強く推奨されています。マージウィン
-ドウが開く前に -mm ツリーに現れなかったパッチはメインラインにマージさ
-れることは困難になります。
-
-これらのカーネルは安定して動作すべきシステムとして使うのには適切ではあ
-りませんし、カーネルブランチの中でももっとも動作にリスクが高いものです。
-
-もしあなたが、カーネル開発プロセスの支援をしたいと思っているのであれば、
-どうぞこれらのカーネルリリースをテストに使ってみて、そしてもし問題があ
-れば、またもし全てが正しく動作したとしても、linux-kernel メーリングリ
-ストにフィードバックを提供してください。
-
-すべての他の実験的パッチに加えて、これらのカーネルは通常リリース時点で
-メインラインの -git カーネルに含まれる全ての変更も含んでいます。
-
--mm カーネルは決まったスケジュールではリリースされません、しかし通常幾
-つかの -mm カーネル (1 から 3 が普通）が各-rc カーネルの間にリリースさ
-れます。
-
サブシステム毎のカーネルツリーとパッチ
-------------------------------------------
-カーネルの様々な領域で何が起きているかを見られるようにするため、多くの
-カーネルサブシステム開発者は彼らの開発ツリーを公開しています。これらの
-ツリーは説明したように -mm カーネルリリースに入れ込まれます。
+それぞれのカーネルサブシステムのメンテナ達は --- そして多くのカーネル
+サブシステムの開発者達も --- 各自の最新の開発状況をソースリポジトリに
+公開しています。そのため、自分とは異なる領域のカーネルで何が起きている
+かを他の人が見られるようになっています。開発が早く進んでいる領域では、
+開発者は自身の投稿がどのサブシステムカーネルツリーを元にしているか質問
+されるので、その投稿とすでに進行中の他の作業との衝突が避けられます。
-以下はさまざまなカーネルツリーの中のいくつかのリスト-
+大部分のこれらのリポジトリは git ツリーです。しかしその他の SCM や
+quilt シリーズとして公開されているパッチキューも使われています。これら
+のサブシステムリポジトリのアドレスは MAINTAINERS ファイルにリストされ
+ています。これらの多くは http://git.kernel.org/ で参照することができま
+す。
- git ツリー-
- - Kbuild の開発ツリー、Sam Ravnborg <sam@ravnborg.org>
- git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+提案されたパッチがこのようなサブシステムツリーにコミットされる前に、メー
+リングリストで事前にレビューにかけられます（以下の対応するセクションを
+参照）。いくつかのカーネルサブシステムでは、このレビューは patchwork
+というツールによって追跡されます。Patchwork は web インターフェイスに
+よってパッチ投稿の表示、パッチへのコメント付けや改訂などができ、そして
+メンテナはパッチに対して、レビュー中、受付済み、拒否というようなマーク
+をつけることができます。大部分のこれらの patchwork のサイトは
+http://patchwork.kernel.org/ でリストされています。
- - ACPI の開発ツリー、 Len Brown <len.brown@intel.com>
- git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+統合テストのための 2.6.x -next カーネルツリー
+---------------------------------------------
- - Block の開発ツリー、Jens Axboe <axboe@suse.de>
- git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+サブシステムツリーの更新内容がメインラインの 2.6.x ツリーにマージされ
+る前に、それらは統合テストされる必要があります。この目的のため、実質的
+に全サブシステムツリーからほぼ毎日プルされてできる特別なテスト用のリ
+ポジトリが存在します-
+ http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+ http://linux.f-seidel.de/linux-next/pmwiki/
- - DRM の開発ツリー、Dave Airlie <airlied@linux.ie>
- git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
-
- - ia64 の開発ツリー、Tony Luck <tony.luck@intel.com>
- git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
- - infiniband, Roland Dreier <rolandd@cisco.com>
- git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
- - libata, Jeff Garzik <jgarzik@pobox.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
- - ネットワークドライバ, Jeff Garzik <jgarzik@pobox.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
- - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
- git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
- - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
- - x86, Ingo Molnar <mingo@elte.hu>
- git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
-
- quilt ツリー-
- - USB, ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
- kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-
- その他のカーネルツリーは http://git.kernel.org/ と MAINTAINERS ファ
- イルに一覧表があります。
+このやり方によって、-next カーネルは次のマージ機会でどんなものがメイン
+ラインカーネルにマージされるか、おおまかなの展望を提供します。-next
+カーネルの実行テストを行う冒険好きなテスターは大いに歓迎されます
バグレポート
-------------
@@ -673,10 +631,9 @@
じところからスタートしたのですから。
Paolo Ciarrocchi に感謝、彼は彼の書いた "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process)セクショ
-ンをこのテキストの原型にすることを許可してくれました。
-Rundy Dunlap と Gerrit Huizenga はメーリングリストでやるべきこととやっ
-てはいけないことのリストを提供してくれました。
+(http://lwn.net/Articles/94386/) セクションをこのテキストの原型にする
+ことを許可してくれました。Rundy Dunlap と Gerrit Huizenga はメーリング
+リストでやるべきこととやってはいけないことのリストを提供してくれました。
以下の人々のレビュー、コメント、貢献に感謝。
Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cc85a92..c603ef7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -245,7 +245,7 @@
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
- old_ordering, s4_nonvs, sci_force_enable }
+ old_ordering, nonvs, sci_force_enable }
See Documentation/power/video.txt for information on
s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
@@ -1664,6 +1664,10 @@
noexec=on: enable non-executable mappings (default)
noexec=off: disable non-executable mappings
+ nosmep [X86]
+ Disable SMEP (Supervisor Mode Execution Protection)
+ even if it is supported by processor.
+
noexec32 [X86-64]
This affects only 32-bit executables.
noexec32=on: enable non-executable mappings (default)
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index ee496eb..88d4afb 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -1,4 +1,4 @@
-[state: 27-01-2011]
+[state: 17-04-2011]
BATMAN-ADV
----------
@@ -19,6 +19,7 @@
network driver, and can be used on wifi as well as ethernet lan,
vpn, etc ... (anything with ethernet-style layer 2).
+
CONFIGURATION
-------------
@@ -160,13 +161,13 @@
-> "TQ mac value" - src mac's link quality towards mac address
of a neighbor originator's interface which
is being used for routing
--> "HNA mac" - HNA announced by source mac
+-> "TT mac" - TT announced by source mac
-> "PRIMARY" - this is a primary interface
-> "SEC mac" - secondary mac address of source
(requires preceding PRIMARY)
The TQ value has a range from 4 to 255 with 255 being the best.
-The HNA entries are showing which hosts are connected to the mesh
+The TT entries are showing which hosts are connected to the mesh
via bat0 or being bridged into the mesh network. The PRIMARY/SEC
values are only applied on primary interfaces
@@ -199,7 +200,7 @@
0 - All debug output disabled
1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or hna added / changed / deleted
+2 - Enable route or tt entry added / changed / deleted
3 - Enable all messages
The debug output can be changed at runtime using the file
@@ -207,7 +208,7 @@
# echo 2 > /sys/class/net/bat0/mesh/log_level
-will enable debug messages for when routes or HNAs change.
+will enable debug messages for when routes or TTs change.
BATCTL
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index e27202bb..1f45bd8 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
Linux Ethernet Bonding Driver HOWTO
- Latest update: 23 September 2009
+ Latest update: 27 April 2011
Initial release : Thomas Davis <tadavis at lbl.gov>
Corrections, HA extensions : 2000/10/03-15 :
@@ -585,25 +585,23 @@
chosen.
num_grat_arp
-
- Specifies the number of gratuitous ARPs to be issued after a
- failover event. One gratuitous ARP is issued immediately after
- the failover, subsequent ARPs are sent at a rate of one per link
- monitor interval (arp_interval or miimon, whichever is active).
-
- The valid range is 0 - 255; the default value is 1. This option
- affects only the active-backup mode. This option was added for
- bonding version 3.3.0.
-
num_unsol_na
- Specifies the number of unsolicited IPv6 Neighbor Advertisements
- to be issued after a failover event. One unsolicited NA is issued
- immediately after the failover.
+ Specify the number of peer notifications (gratuitous ARPs and
+ unsolicited IPv6 Neighbor Advertisements) to be issued after a
+ failover event. As soon as the link is up on the new slave
+ (possibly immediately) a peer notification is sent on the
+ bonding device and each VLAN sub-device. This is repeated at
+ each link monitor interval (arp_interval or miimon, whichever
+ is active) if the number is greater than 1.
- The valid range is 0 - 255; the default value is 1. This option
- affects only the active-backup mode. This option was added for
- bonding version 3.4.0.
+ The valid range is 0 - 255; the default value is 1. These options
+ affect only the active-backup mode. These options were added for
+ bonding versions 3.3.0 and 3.4.0 respectively.
+
+ From Linux 2.6.40 and bonding version 3.7.1, these notifications
+ are generated by the ipv4 and ipv6 code and the numbers of
+ repetitions cannot be set independently.
primary
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
index 98953c0..9a2a0371 100644
--- a/Documentation/networking/igb.txt
+++ b/Documentation/networking/igb.txt
@@ -93,6 +93,19 @@
REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
found, the system will fallback to MSI or to Legacy interrupts.
+ MAC and VLAN anti-spoofing feature
+ ----------------------------------
+ When a malicious driver attempts to send a spoofed packet, it is dropped by
+ the hardware and not transmitted. An interrupt is sent to the PF driver
+ notifying it of the spoof attempt.
+
+ When a spoofed packet is detected the PF driver will send the following
+ message to the system log (displayed by the "dmesg" command):
+
+ Spoof event(s) detected on VF(n)
+
+ Where n=the VF that attempted to do the spoofing.
+
Support
=======
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 1971bcf..8888083 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -279,11 +279,15 @@
time.) Unlike the other suspend-related phases, during the prepare
phase the device tree is traversed top-down.
- The prepare phase uses only a bus callback. After the callback method
- returns, no new children may be registered below the device. The method
- may also prepare the device or driver in some way for the upcoming
- system power transition, but it should not put the device into a
- low-power state.
+ In addition to that, if device drivers need to allocate additional
+ memory to be able to hadle device suspend correctly, that should be
+ done in the prepare phase.
+
+ After the prepare callback method returns, no new children may be
+ registered below the device. The method may also prepare the device or
+ driver in some way for the upcoming system power transition (for
+ example, by allocating additional memory required for this purpose), but
+ it should not put the device into a low-power state.
2. The suspend methods should quiesce the device to stop it from performing
I/O. They also may save the device registers and put it into the
diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt
index cf98070..c2a4a34 100644
--- a/Documentation/power/notifiers.txt
+++ b/Documentation/power/notifiers.txt
@@ -1,46 +1,41 @@
Suspend notifiers
- (C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+ (C) 2007-2011 Rafael J. Wysocki <rjw@sisk.pl>, GPL
-There are some operations that device drivers may want to carry out in their
-.suspend() routines, but shouldn't, because they can cause the hibernation or
-suspend to fail. For example, a driver may want to allocate a substantial amount
-of memory (like 50 MB) in .suspend(), but that shouldn't be done after the
-swsusp's memory shrinker has run.
+There are some operations that subsystems or drivers may want to carry out
+before hibernation/suspend or after restore/resume, but they require the system
+to be fully functional, so the drivers' and subsystems' .suspend() and .resume()
+or even .prepare() and .complete() callbacks are not suitable for this purpose.
+For example, device drivers may want to upload firmware to their devices after
+resume/restore, but they cannot do it by calling request_firmware() from their
+.resume() or .complete() routines (user land processes are frozen at these
+points). The solution may be to load the firmware into memory before processes
+are frozen and upload it from there in the .resume() routine.
+A suspend/hibernation notifier may be used for this purpose.
-Also, there may be some operations, that subsystems want to carry out before a
-hibernation/suspend or after a restore/resume, requiring the system to be fully
-functional, so the drivers' .suspend() and .resume() routines are not suitable
-for this purpose. For example, device drivers may want to upload firmware to
-their devices after a restore from a hibernation image, but they cannot do it by
-calling request_firmware() from their .resume() routines (user land processes
-are frozen at this point). The solution may be to load the firmware into
-memory before processes are frozen and upload it from there in the .resume()
-routine. Of course, a hibernation notifier may be used for this purpose.
-
-The subsystems that have such needs can register suspend notifiers that will be
-called upon the following events by the suspend core:
+The subsystems or drivers having such needs can register suspend notifiers that
+will be called upon the following events by the PM core:
PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will
be frozen immediately.
PM_POST_HIBERNATION The system memory state has been restored from a
- hibernation image or an error occurred during the
- hibernation. Device drivers' .resume() callbacks have
+ hibernation image or an error occurred during
+ hibernation. Device drivers' restore callbacks have
been executed and tasks have been thawed.
PM_RESTORE_PREPARE The system is going to restore a hibernation image.
- If all goes well the restored kernel will issue a
+ If all goes well, the restored kernel will issue a
PM_POST_HIBERNATION notification.
-PM_POST_RESTORE An error occurred during the hibernation restore.
- Device drivers' .resume() callbacks have been executed
+PM_POST_RESTORE An error occurred during restore from hibernation.
+ Device drivers' restore callbacks have been executed
and tasks have been thawed.
-PM_SUSPEND_PREPARE The system is preparing for a suspend.
+PM_SUSPEND_PREPARE The system is preparing for suspend.
PM_POST_SUSPEND The system has just resumed or an error occurred during
- the suspend. Device drivers' .resume() callbacks have
- been executed and tasks have been thawed.
+ suspend. Device drivers' resume callbacks have been
+ executed and tasks have been thawed.
It is generally assumed that whatever the notifiers do for
PM_HIBERNATION_PREPARE, should be undone for PM_POST_HIBERNATION. Analogously,
diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx
index 9e15b4f..19e7cd4 100644
--- a/Documentation/scsi/LICENSE.qla2xxx
+++ b/Documentation/scsi/LICENSE.qla2xxx
@@ -1,11 +1,11 @@
-Copyright (c) 2003-2005 QLogic Corporation
-QLogic Linux Fibre Channel HBA Driver
+Copyright (c) 2003-2011 QLogic Corporation
+QLogic Linux/ESX Fibre Channel HBA Driver
-This program includes a device driver for Linux 2.6 that may be
+This program includes a device driver for Linux 2.6/ESX that may be
distributed with QLogic hardware specific firmware binary file.
You may modify and redistribute the device driver code under the
-GNU General Public License as published by the Free Software
-Foundation (version 2 or a later version).
+GNU General Public License (a copy of which is attached hereto as
+Exhibit A) published by the Free Software Foundation (version 2).
You may redistribute the hardware specific firmware binary file
under the following terms:
@@ -43,3 +43,285 @@
TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
COMBINATION WITH THIS PROGRAM.
+
+
+EXHIBIT A
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index cbd05ff..3201a70 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -32,6 +32,17 @@
1. /proc/sys/net/core - Network core options
-------------------------------------------------------
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+ 0 - disable the JIT (default value)
+ 1 - enable the JIT
+ 2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
rmem_default
------------
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
index 6d27ab8..c83bd6b 100644
--- a/Documentation/trace/kprobetrace.txt
+++ b/Documentation/trace/kprobetrace.txt
@@ -120,7 +120,6 @@
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1;signed:0;
field:int common_pid; offset:4; size:4; signed:1;
- field:int common_lock_depth; offset:8; size:4; signed:1;
field:unsigned long __probe_ip; offset:12; size:4; signed:0;
field:int __probe_nargs; offset:16; size:4; signed:1;
diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX
new file mode 100644
index 0000000..fe0251c
--- /dev/null
+++ b/Documentation/virtual/00-INDEX
@@ -0,0 +1,10 @@
+Virtualization support in the Linux kernel.
+
+00-INDEX
+ - this file.
+kvm/
+ - Kernel Virtual Machine. See also http://linux-kvm.org
+lguest/
+ - Extremely simple hypervisor for experimental/educational use.
+uml/
+ - User Mode Linux, builds/runs Linux kernel as a userspace program.
diff --git a/Documentation/kvm/api.txt b/Documentation/virtual/kvm/api.txt
similarity index 100%
rename from Documentation/kvm/api.txt
rename to Documentation/virtual/kvm/api.txt
diff --git a/Documentation/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt
similarity index 100%
rename from Documentation/kvm/cpuid.txt
rename to Documentation/virtual/kvm/cpuid.txt
diff --git a/Documentation/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt
similarity index 100%
rename from Documentation/kvm/locking.txt
rename to Documentation/virtual/kvm/locking.txt
diff --git a/Documentation/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
similarity index 100%
rename from Documentation/kvm/mmu.txt
rename to Documentation/virtual/kvm/mmu.txt
diff --git a/Documentation/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt
similarity index 100%
rename from Documentation/kvm/msr.txt
rename to Documentation/virtual/kvm/msr.txt
diff --git a/Documentation/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt
similarity index 100%
rename from Documentation/kvm/ppc-pv.txt
rename to Documentation/virtual/kvm/ppc-pv.txt
diff --git a/Documentation/kvm/review-checklist.txt b/Documentation/virtual/kvm/review-checklist.txt
similarity index 95%
rename from Documentation/kvm/review-checklist.txt
rename to Documentation/virtual/kvm/review-checklist.txt
index 730475a..a850986 100644
--- a/Documentation/kvm/review-checklist.txt
+++ b/Documentation/virtual/kvm/review-checklist.txt
@@ -7,7 +7,7 @@
2. Patches should be against kvm.git master branch.
3. If the patch introduces or modifies a new userspace API:
- - the API must be documented in Documentation/kvm/api.txt
+ - the API must be documented in Documentation/virtual/kvm/api.txt
- the API must be discoverable using KVM_CHECK_EXTENSION
4. New state must include support for save/restore.
diff --git a/Documentation/kvm/timekeeping.txt b/Documentation/virtual/kvm/timekeeping.txt
similarity index 100%
rename from Documentation/kvm/timekeeping.txt
rename to Documentation/virtual/kvm/timekeeping.txt
diff --git a/Documentation/lguest/.gitignore b/Documentation/virtual/lguest/.gitignore
similarity index 100%
rename from Documentation/lguest/.gitignore
rename to Documentation/virtual/lguest/.gitignore
diff --git a/Documentation/lguest/Makefile b/Documentation/virtual/lguest/Makefile
similarity index 100%
rename from Documentation/lguest/Makefile
rename to Documentation/virtual/lguest/Makefile
diff --git a/Documentation/lguest/extract b/Documentation/virtual/lguest/extract
similarity index 100%
rename from Documentation/lguest/extract
rename to Documentation/virtual/lguest/extract
diff --git a/Documentation/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c
similarity index 100%
rename from Documentation/lguest/lguest.c
rename to Documentation/virtual/lguest/lguest.c
diff --git a/Documentation/lguest/lguest.txt b/Documentation/virtual/lguest/lguest.txt
similarity index 97%
rename from Documentation/lguest/lguest.txt
rename to Documentation/virtual/lguest/lguest.txt
index dad9997..bff0c55 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/virtual/lguest/lguest.txt
@@ -74,7 +74,8 @@
- Run an lguest as root:
- Documentation/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 --block=rootfile root=/dev/vda
+ Documentation/virtual/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 \
+ --block=rootfile root=/dev/vda
Explanation:
64: the amount of memory to use, in MB.
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
similarity index 100%
rename from Documentation/uml/UserModeLinux-HOWTO.txt
rename to Documentation/virtual/uml/UserModeLinux-HOWTO.txt
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index 092e596..c54b4f5 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -206,7 +206,7 @@
(e.g. because you have < 3 GB memory).
Kernel boot message: "PCI-DMA: Disabling IOMMU"
- 2. <arch/x86_64/kernel/pci-gart.c>: AMD GART based hardware IOMMU.
+ 2. <arch/x86/kernel/amd_gart_64.c>: AMD GART based hardware IOMMU.
Kernel boot message: "PCI-DMA: using GART IOMMU"
3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used
diff --git a/Documentation/zh_CN/email-clients.txt b/Documentation/zh_CN/email-clients.txt
new file mode 100644
index 0000000..5d65e32
--- /dev/null
+++ b/Documentation/zh_CN/email-clients.txt
@@ -0,0 +1,210 @@
+锘?Chinese translated version of Documentation/email-clients.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Chinese maintainer: Harry Wei <harryxiyou@gmail.com>
+---------------------------------------------------------------------
+Documentation/email-clients.txt ???涓????缈昏??
+
+濡??????宠??璁烘????存?版???????????瀹癸??璇风?存?ヨ??绯诲?????妗ｇ??缁存?よ?????濡????浣?浣跨?ㄨ?辨??
+浜ゆ???????伴?剧??璇?锛?涔????浠ュ??涓???????缁存?よ??姹???┿??濡???????缈昏????存?颁???????舵?????缈?
+璇?瀛???ㄩ??棰?锛?璇疯??绯讳腑??????缁存?よ?????
+
+涓???????缁存?よ??锛? 璐惧??濞? Harry Wei <harryxiyou@gmail.com>
+涓???????缈昏?????锛? 璐惧??濞? Harry Wei <harryxiyou@gmail.com>
+涓?????????¤?????锛? Yinglin Luan <synmyth@gmail.com>
+ Xiaochen Wang <wangxiaochen0@gmail.com>
+ yaxinsn <yaxinsn@163.com>
+
+浠ヤ??涓烘?ｆ??
+---------------------------------------------------------------------
+
+Linux???浠跺?㈡?风?????缃?淇℃??
+======================================================================
+
+?????????缃?
+----------------------------------------------------------------------
+Linux?????歌ˉ涓???????杩????浠惰?????浜ょ??锛????濂芥??琛ヤ??浣?涓洪??浠朵????????宓?????????????浜?缁存?よ??
+??ユ?堕??浠讹??浣???????浠剁?????瀹规?煎??搴?璇ユ??"text/plain"?????惰??锛????浠朵????????涓?璧???????锛?
+???涓鸿??浼?浣胯ˉ涓????寮???ㄩ?ㄥ????ㄨ??璁鸿??绋?涓???????寰???伴?俱??
+
+??ㄦ?ュ?????Linux?????歌ˉ涓???????浠跺?㈡?风????ㄥ?????琛ヤ????跺??璇ュ??浜?????????????濮???舵?????渚?濡?锛?
+浠?浠?涓???芥?瑰?????????????ゅ?惰〃绗???????绌烘?硷???????虫????ㄦ??涓?琛????寮?澶存?????缁?灏俱??
+
+涓?瑕????杩?"format=flowed"妯″????????琛ヤ?????杩???蜂??寮?璧蜂?????棰????浠ュ?????瀹崇?????琛????
+
+涓?瑕?璁╀????????浠跺?㈡?风??杩?琛??????ㄦ?㈣?????杩???蜂??浼???村??浣????琛ヤ?????
+
+???浠跺?㈡?风??涓???芥?瑰???????????瀛?绗????缂??????瑰?????瑕??????????琛ヤ???????芥??ASCII??????UTF-8缂??????瑰??锛?
+濡????浣?浣跨??UTF-8缂??????瑰???????????浠讹????ｄ??浣?灏?浼???垮??涓?浜??????藉????????瀛?绗???????棰????
+
+???浠跺?㈡?风??搴?璇ュ舰???骞朵??淇???? References: ?????? In-Reply-To: ???棰?锛???ｄ??
+???浠惰??棰?灏变??浼?涓???????
+
+澶???剁??甯?(?????????璐寸??甯?)???甯镐????界?ㄤ??琛ヤ??锛????涓哄?惰〃绗?浼?杞????涓虹┖??笺??浣跨??xclipboard, xclip
+??????xcutsel涔?璁稿??浠ワ??浣???????濂芥??璇?涓?涓?????????垮??浣跨?ㄥ????剁??甯????
+
+涓?瑕???ㄤ娇???PGP/GPG缃插????????浠朵腑??????琛ヤ?????杩???蜂??浣垮??寰?澶???????涓???借?诲??????????ㄤ??浣????琛ヤ?????
+锛?杩?涓????棰?搴?璇ユ?????浠ヤ慨澶????锛?
+
+??ㄧ???????搁??浠跺??琛ㄥ?????琛ヤ??涔????锛?缁????宸卞?????涓?涓?琛ヤ?????涓?涓???????涓绘??锛?淇?瀛???ユ?跺?扮??
+???浠讹??灏?琛ヤ?????'patch'??戒护???涓?锛?濡??????????浜?锛????缁??????搁??浠跺??琛ㄥ????????
+
+
+涓?浜????浠跺?㈡?风?????绀?
+----------------------------------------------------------------------
+杩????缁???轰??浜?璇?缁????MUA???缃????绀猴?????浠ョ?ㄤ??缁?Linux?????稿?????琛ヤ?????杩?浜?骞朵???????虫??
+?????????杞?浠跺?????缃???荤?????
+
+璇存??锛?
+TUI = 浠ユ?????涓哄?虹???????ㄦ?锋?ュ??
+GUI = ??惧舰?????㈢?ㄦ?锋?ュ??
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Alpine (TUI)
+
+???缃????椤癸??
+???"Sending Preferences"??ㄥ??锛?
+
+- "Do Not Send Flowed Text"蹇?椤诲?????
+- "Strip Whitespace Before Sending"蹇?椤诲?抽??
+
+褰???????浠舵?讹????????搴?璇ユ?惧?ㄨˉ涓?浼???虹?扮????版?癸????跺?????涓?CTRL-R缁???????锛?浣挎??瀹????
+琛ヤ?????浠跺????ュ?伴??浠朵腑???
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Evolution (GUI)
+
+涓?浜?寮????????????????浣跨?ㄥ????????琛ヤ??
+
+褰??????╅??浠堕??椤癸??Preformat
+ 浠?Format->Heading->Preformatted (Ctrl-7)??????宸ュ?锋??
+
+??跺??浣跨??锛?
+ Insert->Text File... (Alt-n x)?????ヨˉ涓????浠躲??
+
+浣?杩????浠?"diff -Nru old.c new.c | xclip"锛???????Preformat锛???跺??浣跨?ㄤ腑??撮??杩?琛?绮?甯????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Kmail (GUI)
+
+涓?浜?寮????????????????浣跨?ㄥ????????琛ヤ?????
+
+榛?璁よ?剧疆涓?涓?HTML??煎??????????????锛?涓?瑕??????ㄥ?????
+
+褰?涔????涓?灏????浠剁????跺??锛???ㄩ??椤逛?????涓?瑕??????╄????ㄦ?㈣????????涓????缂虹?瑰氨???浣???ㄩ??浠朵腑杈???ョ??浠讳????????
+??戒??浼?琚??????ㄦ?㈣??锛????姝や??蹇?椤诲?ㄥ?????琛ヤ??涔?????????ㄦ?㈣????????绠?????????规??灏辨???????ㄨ????ㄦ?㈣????ヤ功??????浠讹??
+??跺?????瀹?淇?瀛?涓鸿??绋裤??涓????浣???ㄨ??绋夸腑???娆℃??寮?瀹?锛?瀹?宸茬????ㄩ?ㄨ????ㄦ?㈣??浜?锛???ｄ??浣???????浠惰?界?舵病???
+?????╄????ㄦ?㈣??锛?浣????杩?涓?浼?澶卞?诲凡???????????ㄦ?㈣?????
+
+??ㄩ??浠剁??搴????锛??????ヨˉ涓?涔????锛???句??甯哥?ㄧ??琛ヤ??瀹????绗?锛?涓?涓?杩?瀛????(---)???
+
+??跺?????"Message"????????＄??锛??????╂????ユ??浠讹????ョ????????浣????琛ヤ?????浠躲??杩????涓?涓?棰?澶???????椤癸??浣????浠?
+???杩?瀹????缃?浣???????浠跺缓绔?宸ュ?锋????????锛?杩????浠ュ甫涓?"insert file"??炬?????
+
+浣????浠ュ????ㄥ?伴??杩?GPG???璁伴??浠讹??浣???????宓?琛ヤ?????濂戒??瑕?浣跨??GPG???璁板??浠????浣?涓哄??宓??????????绛惧??琛ヤ??锛?
+褰?浠?GPG涓???????7浣?缂??????朵??浣夸??浠?????????村??澶???????
+
+濡????浣????瑕?浠ラ??浠剁??褰㈠????????琛ヤ??锛???ｄ??灏卞?抽????瑰?婚??浠讹????跺?????涓?灞???э??绐????"Suggest automatic
+display"锛?杩???峰??宓????浠舵?村?规??璁╄?昏???????般??
+
+褰?浣?瑕?淇?瀛?灏?瑕?????????????宓???????琛ヤ??锛?浣????浠ヤ??娑???????琛ㄧ????奸????╁?????琛ヤ????????浠讹????跺????冲?婚?????
+"save as"???浣????浠ヤ娇??ㄤ??涓?娌℃????存?圭????????琛ヤ????????浠讹??濡????瀹????浠ユ?ｇ‘???褰㈠??缁???????褰?浣?姝ｇ????ㄥ??
+???宸辩??绐???ｄ??涓?瀵????锛???ｆ?舵病??????椤瑰??浠ヤ??瀛????浠?--宸茬?????涓?涓?杩???风??bug琚?姹???ュ?颁??kmail???bugzilla
+骞朵??甯????杩?灏?浼?琚?澶??????????浠舵??浠ュ?????瀵规??涓???ㄦ?峰??璇诲???????????琚?淇?瀛????锛????浠ュ?????浣???虫?????浠跺????跺?板?朵????版?癸??
+浣?涓?寰?涓????浠?浠????????????逛负缁?????????翠?????璇汇??
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Lotus Notes (GUI)
+
+涓?瑕?浣跨?ㄥ?????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Mutt (TUI)
+
+寰?澶?Linux寮????浜哄??浣跨??mutt瀹㈡?风??锛????浠ヨ?????瀹????瀹?宸ヤ????????甯告??浜????
+
+Mutt涓????甯?缂?杈????锛????浠ヤ??绠′??浣跨?ㄤ??涔?缂?杈???ㄩ?戒??搴?璇ュ甫????????ㄦ??琛????澶у????扮??杈???ㄩ?藉甫???
+涓?涓?"insert file"???椤癸??瀹????浠ラ??杩?涓???瑰?????浠跺??瀹圭????瑰???????ユ??浠躲??
+
+'vim'浣?涓?mutt???缂?杈????锛?
+ set editor="vi"
+
+ 濡????浣跨??xclip锛???插?ヤ互涓???戒护
+ :set paste
+ ???涓????涔??????????shift-insert??????浣跨??
+ :r filename
+
+濡??????宠?????琛ヤ??浣?涓哄??宓??????????
+(a)ttach宸ヤ?????寰?濂斤??涓?甯????"set paste"???
+
+???缃????椤癸??
+瀹?搴?璇ヤ互榛?璁よ?剧疆???褰㈠??宸ヤ?????
+??惰??锛????"send_charset"璁剧疆涓?"us-ascii::utf-8"涔????涓?涓?涓???????涓绘?????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Pine (TUI)
+
+Pine杩???绘??涓?浜?绌烘?煎????????棰?锛?浣????杩?浜???板?ㄥ??璇ラ?借??淇?澶?浜????
+
+濡???????浠ワ??璇蜂娇???alpine(pine???缁ф?胯??)
+
+???缃????椤癸??
+- ???杩?????????????瑕?娑???ゆ??绋???????
+- "no-strip-whitespace-before-send"???椤逛????????瑕???????
+
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Sylpheed (GUI)
+
+- ???宓??????????浠ュ??濂界??宸ヤ??锛???????浣跨?ㄩ??浠讹?????
+- ???璁镐娇??ㄥ????ㄧ??缂?杈???ㄣ??
+- 瀵逛?????褰?杈?澶???堕??甯告?????
+- 濡???????杩?non-SSL杩???ワ?????娉?浣跨??TLS SMTP?????????
+- ??ㄧ?????绐???ｄ腑???涓?涓?寰??????ㄧ??ruler bar???
+- 缁???板?????涓?娣诲????板??灏变??浼?姝ｇ‘???浜?瑙ｆ?剧ず??????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Thunderbird (GUI)
+
+榛?璁ゆ????典??锛?thunderbird寰?瀹规??????????????锛?浣????杩????涓?浜???规?????浠ュ己??跺?????寰???村ソ???
+
+- ??ㄧ?ㄦ?峰????疯?剧疆???锛?缁???????瀵诲??锛?涓?瑕???????"Compose messages in HTML format"???
+
+- 缂?杈?浣????Thunderbird???缃?璁剧疆??ヤ娇瀹?涓?瑕????琛?浣跨??锛?user_pref("mailnews.wraplength", 0);
+
+- 缂?杈?浣????Thunderbird???缃?璁剧疆锛?浣垮??涓?瑕?浣跨??"format=flowed"??煎??锛?user_pref("mailnews.
+ send_plaintext_flowed", false);
+
+- 浣????瑕?浣?Thunderbird???涓洪???????煎????瑰??锛?
+ 濡????榛?璁ゆ????典??浣?涔??????????HTML??煎??锛???ｄ?????寰???俱??浠?浠?浠????棰???????涓????妗?涓???????"Preformat"??煎?????
+ 濡????榛?璁ゆ????典??浣?涔??????????????????煎??锛?浣?涓?寰????瀹???逛负HTML??煎??锛?浠?浠?浣?涓轰??娆℃?х??锛???ヤ功?????扮??娑????锛?
+ ??跺??寮哄?朵娇瀹??????版???????煎??锛???????瀹?灏变?????琛????瑕?瀹???板??锛???ㄥ??淇＄????炬??涓?浣跨??shift?????ヤ娇瀹????涓?HTML
+ ??煎??锛???跺?????棰???????涓????妗?涓???????"Preformat"??煎?????
+
+- ???璁镐娇??ㄥ????ㄧ??缂?杈????锛?
+ ???瀵?Thunderbird???琛ヤ?????绠?????????规??灏辨??浣跨?ㄤ??涓?"external editor"??╁??锛???跺??浣跨?ㄤ????????娆㈢??
+ $EDITOR??ヨ?诲???????????骞惰ˉ涓???版?????涓????瑕?瀹???板??锛????浠ヤ??杞藉苟涓?瀹?瑁?杩?涓???╁??锛???跺??娣诲??涓?涓?浣跨?ㄥ?????
+ ??????View->Toolbars->Customize...??????褰?浣?涔????淇℃???????跺??浠?浠???瑰?诲??灏卞??浠ヤ?????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+TkRat (GUI)
+
+???浠ヤ娇??ㄥ?????浣跨??"Insert file..."??????澶???ㄧ??缂?杈???ㄣ??
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Gmail (Web GUI)
+
+涓?瑕?浣跨?ㄥ????????琛ヤ?????
+
+Gmail缃?椤靛?㈡?风???????ㄥ?版????惰〃绗?杞????涓虹┖??笺??
+
+??界?跺?惰〃绗?杞????涓虹┖??奸??棰????浠ヨ??澶???ㄧ??杈???ㄨВ??筹???????跺??杩?浼?浣跨?ㄥ??杞???㈣?????姣?琛???????涓?78涓?瀛?绗????
+
+???涓?涓????棰????Gmail杩?浼????浠讳??涓????ASCII???瀛?绗????淇℃????逛负base64缂???????瀹????涓?瑗垮????????娆ф床浜虹?????瀛????
+
+ ###
diff --git a/MAINTAINERS b/MAINTAINERS
index 2199ba1..49a0bf3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -405,8 +405,8 @@
F: sound/oss/aedsp16.c
AFFS FILE SYSTEM
-M: Roman Zippel <zippel@linux-m68k.org>
-S: Maintained
+L: linux-fsdevel@vger.kernel.org
+S: Orphan
F: Documentation/filesystems/affs.txt
F: fs/affs/
@@ -1232,13 +1232,6 @@
S: Supported
F: drivers/net/wireless/ath/ath9k/
-ATHEROS AR9170 WIRELESS DRIVER
-M: Christian Lamparter <chunkeey@web.de>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/users/Drivers/ar9170
-S: Obsolete
-F: drivers/net/wireless/ath/ar9170/
-
CARL9170 LINUX COMMUNITY WIRELESS DRIVER
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
@@ -2813,38 +2806,19 @@
F: drivers/gpio/
F: include/linux/gpio*
+GRE DEMULTIPLEXER DRIVER
+M: Dmitry Kozlov <xeb@mail.ru>
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/ipv4/gre.c
+F: include/net/gre.h
+
GRETH 10/100/1G Ethernet MAC device driver
M: Kristoffer Glembo <kristoffer@gaisler.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/greth*
-HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-M: Frank Seidel <frank@f-seidel.de>
-L: platform-driver-x86@vger.kernel.org
-W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
-S: Maintained
-F: drivers/platform/x86/hdaps.c
-
-HWPOISON MEMORY FAILURE HANDLING
-M: Andi Kleen <andi@firstfloor.org>
-L: linux-mm@kvack.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
-S: Maintained
-F: mm/memory-failure.c
-F: mm/hwpoison-inject.c
-
-HYPERVISOR VIRTUAL CONSOLE DRIVER
-L: linuxppc-dev@lists.ozlabs.org
-S: Odd Fixes
-F: drivers/tty/hvc/
-
-iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
-M: Peter Jones <pjones@redhat.com>
-M: Konrad Rzeszutek Wilk <konrad@kernel.org>
-S: Maintained
-F: drivers/firmware/iscsi_ibft*
-
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
@@ -2895,6 +2869,26 @@
S: Maintained
F: drivers/media/video/gspca/
+HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
+M: Frank Seidel <frank@f-seidel.de>
+L: platform-driver-x86@vger.kernel.org
+W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
+S: Maintained
+F: drivers/platform/x86/hdaps.c
+
+HWPOISON MEMORY FAILURE HANDLING
+M: Andi Kleen <andi@firstfloor.org>
+L: linux-mm@kvack.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
+S: Maintained
+F: mm/memory-failure.c
+F: mm/hwpoison-inject.c
+
+HYPERVISOR VIRTUAL CONSOLE DRIVER
+L: linuxppc-dev@lists.ozlabs.org
+S: Odd Fixes
+F: drivers/tty/hvc/
+
HARDWARE MONITORING
M: Jean Delvare <khali@linux-fr.org>
M: Guenter Roeck <guenter.roeck@ericsson.com>
@@ -2945,8 +2939,8 @@
F: include/linux/cciss_ioctl.h
HFS FILESYSTEM
-M: Roman Zippel <zippel@linux-m68k.org>
-S: Maintained
+L: linux-fsdevel@vger.kernel.org
+S: Orphan
F: Documentation/filesystems/hfs.txt
F: fs/hfs/
@@ -3362,6 +3356,12 @@
F: drivers/net/wimax/i2400m/
F: include/linux/wimax/i2400m.h
+INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
+M: Stanislaw Gruszka <sgruszka@redhat.com>
+L: linux-wireless@vger.kernel.org
+S: Supported
+F: drivers/net/wireless/iwlegacy/
+
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Wey-Yi Guy <wey-yi.w.guy@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
@@ -3478,6 +3478,12 @@
F: drivers/pnp/isapnp/
F: include/linux/isapnp.h
+iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
+M: Peter Jones <pjones@redhat.com>
+M: Konrad Rzeszutek Wilk <konrad@kernel.org>
+S: Maintained
+F: drivers/firmware/iscsi_ibft*
+
ISCSI
M: Mike Christie <michaelc@cs.wisc.edu>
L: open-iscsi@googlegroups.com
@@ -3807,7 +3813,7 @@
L: lguest@lists.ozlabs.org
W: http://lguest.ozlabs.org/
S: Odd Fixes
-F: Documentation/lguest/
+F: Documentation/virtual/lguest/
F: arch/x86/lguest/
F: drivers/lguest/
F: include/linux/lguest*.h
@@ -3994,7 +4000,6 @@
M68K ARCHITECTURE
M: Geert Uytterhoeven <geert@linux-m68k.org>
-M: Roman Zippel <zippel@linux-m68k.org>
L: linux-m68k@lists.linux-m68k.org
W: http://www.linux-m68k.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -4379,6 +4384,7 @@
F: net/ipv4/
F: net/ipv6/
F: include/net/ip*
+F: arch/x86/net/*
NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
M: Paul Moore <paul.moore@hp.com>
@@ -4989,6 +4995,13 @@
F: drivers/pps/
F: include/linux/pps*.h
+PPTP DRIVER
+M: Dmitry Kozlov <xeb@mail.ru>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/pptp.c
+W: http://sourceforge.net/projects/accel-pptp
+
PREEMPTIBLE KERNEL
M: Robert Love <rml@tech9.net>
L: kpreempt-tech@lists.sourceforge.net
@@ -5418,6 +5431,7 @@
F: kernel/time/clocksource.c
F: kernel/time/time*.c
F: kernel/time/ntp.c
+F: drivers/clocksource
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
@@ -5598,9 +5612,9 @@
F: include/linux/libata.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
-M: Jayamohan Kallickal <jayamohank@serverengines.com>
+M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
-W: http://www.serverengines.com
+W: http://www.emulex.com
S: Supported
F: drivers/scsi/be2iscsi/
@@ -5818,6 +5832,13 @@
F: drivers/ssb/
F: include/linux/ssb/
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M: Rafał Miłecki <zajec5@gmail.com>
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: drivers/bcma/
+F: include/linux/bcma/
+
SONY VAIO CONTROL DEVICE DRIVER
M: Mattia Dongili <malattia@linux.it>
L: platform-driver-x86@vger.kernel.org
@@ -6556,7 +6577,7 @@
F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
-M: David Brownell <dbrownell@users.sourceforge.net>
+M: Oliver Neukum <oneukum@suse.de>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
@@ -6618,7 +6639,7 @@
L: user-mode-linux-user@lists.sourceforge.net
W: http://user-mode-linux.sourceforge.net
S: Maintained
-F: Documentation/uml/
+F: Documentation/virtual/uml/
F: arch/um/
F: fs/hostfs/
F: fs/hppfs/
@@ -7024,20 +7045,6 @@
S: Maintained
F: drivers/tty/serial/zs.*
-GRE DEMULTIPLEXER DRIVER
-M: Dmitry Kozlov <xeb@mail.ru>
-L: netdev@vger.kernel.org
-S: Maintained
-F: net/ipv4/gre.c
-F: include/net/gre.h
-
-PPTP DRIVER
-M: Dmitry Kozlov <xeb@mail.ru>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/pptp.c
-W: http://sourceforge.net/projects/accel-pptp
-
THE REST
M: Linus Torvalds <torvalds@linux-foundation.org>
L: linux-kernel@vger.kernel.org
diff --git a/Makefile b/Makefile
index 5a7a2e4..a0344a8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 39
-EXTRAVERSION = -rc5
+EXTRAVERSION =
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
@@ -1268,6 +1268,7 @@
@echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
@echo ' make W=1 [targets] Enable extra gcc checks'
+ @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 058937b..b183416 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -452,10 +452,14 @@
#define __NR_fanotify_init 494
#define __NR_fanotify_mark 495
#define __NR_prlimit64 496
+#define __NR_name_to_handle_at 497
+#define __NR_open_by_handle_at 498
+#define __NR_clock_adjtime 499
+#define __NR_syncfs 500
#ifdef __KERNEL__
-#define NR_SYSCALLS 497
+#define NR_SYSCALLS 501
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 42aa078..5a621c6 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -585,8 +585,7 @@
switch (which) {
case IPI_RESCHEDULE:
- /* Reschedule callback. Everything to be done
- is done by the interrupt return path. */
+ scheduler_ipi();
break;
case IPI_CALL_FUNC:
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index a6a1de9..15f999d 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -498,23 +498,27 @@
.quad sys_ni_syscall /* sys_timerfd */
.quad sys_eventfd
.quad sys_recvmmsg
- .quad sys_fallocate /* 480 */
+ .quad sys_fallocate /* 480 */
.quad sys_timerfd_create
.quad sys_timerfd_settime
.quad sys_timerfd_gettime
.quad sys_signalfd4
- .quad sys_eventfd2 /* 485 */
+ .quad sys_eventfd2 /* 485 */
.quad sys_epoll_create1
.quad sys_dup3
.quad sys_pipe2
.quad sys_inotify_init1
- .quad sys_preadv /* 490 */
+ .quad sys_preadv /* 490 */
.quad sys_pwritev
.quad sys_rt_tgsigqueueinfo
.quad sys_perf_event_open
.quad sys_fanotify_init
- .quad sys_fanotify_mark /* 495 */
+ .quad sys_fanotify_mark /* 495 */
.quad sys_prlimit64
+ .quad sys_name_to_handle_at
+ .quad sys_open_by_handle_at
+ .quad sys_clock_adjtime
+ .quad sys_syncfs /* 500 */
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 918e8e0..818e74e 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -375,8 +375,7 @@
static inline void register_rpcc_clocksource(long cycle_freq)
{
- clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4);
- clocksource_register(&clocksource_rpcc);
+ clocksource_register_hz(&clocksource_rpcc, cycle_freq);
}
#else /* !CONFIG_SMP */
static inline void register_rpcc_clocksource(long cycle_freq)
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 433be2a..3d890a9 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -46,6 +46,7 @@
__init_end = .;
/* Freed after init ends here */
+ _sdata = .; /* Start of rw data section */
_data = .;
RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c9f69e0..9dd6101 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -297,6 +297,7 @@
depends on MMU
select CPU_V6
select ARM_AMBA
+ select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -366,6 +367,7 @@
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select HAVE_SCHED_CLOCK
help
Support for Freescale MXC/iMX-based family of processors
@@ -375,11 +377,13 @@
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
help
Support for Freescale MXS-based family of processors
config ARCH_NETX
bool "Hilscher NetX based"
+ select CLKSRC_MMIO
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
@@ -447,6 +451,7 @@
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
+ select CLKSRC_MMIO
select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_CLOCKEVENTS
@@ -487,6 +492,7 @@
config ARCH_LPC32XX
bool "NXP LPC32XX"
+ select CLKSRC_MMIO
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
@@ -561,6 +567,7 @@
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -582,6 +589,7 @@
config ARCH_TEGRA
bool "NVIDIA Tegra"
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
@@ -607,6 +615,7 @@
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
@@ -657,6 +666,7 @@
config ARCH_SA1100
bool "SA1100-based"
+ select CLKSRC_MMIO
select CPU_SA1100
select ISA
select ARCH_SPARSEMEM_ENABLE
@@ -793,6 +803,7 @@
config ARCH_TCC_926
bool "Telechips TCC ARM926-based systems"
+ select CLKSRC_MMIO
select CPU_ARM926T
select HAVE_CLK
select CLKDEV_LOOKUP
@@ -803,6 +814,7 @@
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
+ select CLKSRC_MMIO
select CPU_ARM926T
select HAVE_SCHED_CLOCK
select HAVE_TCM
@@ -864,6 +876,7 @@
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
@@ -1021,6 +1034,7 @@
config PLAT_ORION
bool
+ select CLKSRC_MMIO
select HAVE_SCHED_CLOCK
config PLAT_PXA
@@ -1031,6 +1045,7 @@
config ARM_TIMER_SP804
bool
+ select CLKSRC_MMIO
source arch/arm/mm/Kconfig
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 8ebbb51..0c6852d 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -74,7 +74,7 @@
ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS)
else
ZTEXTADDR := 0
-ZBSSADDR := ALIGN(4)
+ZBSSADDR := ALIGN(8)
endif
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index adf583c..49f5b2e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -179,15 +179,14 @@
bl cache_on
restart: adr r0, LC0
- ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12}
- ldr sp, [r0, #32]
+ ldmia r0, {r1, r2, r3, r6, r9, r11, r12}
+ ldr sp, [r0, #28]
/*
* We might be running at a different address. We need
* to fix up various pointers.
*/
sub r0, r0, r1 @ calculate the delta offset
- add r5, r5, r0 @ _start
add r6, r6, r0 @ _edata
#ifndef CONFIG_ZBOOT_ROM
@@ -206,31 +205,40 @@
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
- * r5 = start of this image
* r9 = size of decompressed image
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
- * r4 >= r10 -> OK
- * r4 + image length <= r5 -> OK
+ * r4 - 16k page directory >= r10 -> OK
+ * r4 + image length <= current position (pc) -> OK
*/
+ add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
- cmp r10, r5
+ ARM( cmp r10, pc )
+ THUMB( mov lr, pc )
+ THUMB( cmp r10, lr )
bls wont_overwrite
/*
* Relocate ourselves past the end of the decompressed kernel.
- * r5 = start of this image
* r6 = _edata
* r10 = end of the decompressed kernel
* Because we always copy ahead, we need to do it from the end and go
* backward in case the source and destination overlap.
*/
- /* Round up to next 256-byte boundary. */
- add r10, r10, #256
+ /*
+ * Bump to the next 256-byte boundary with the size of
+ * the relocation code added. This avoids overwriting
+ * ourself when the offset is small.
+ */
+ add r10, r10, #((reloc_code_end - restart + 256) & ~255)
bic r10, r10, #255
+ /* Get start of code we want to copy and align it down. */
+ adr r5, restart
+ bic r5, r5, #31
+
sub r9, r6, r5 @ size to copy
add r9, r9, #31 @ rounded up to a multiple
bic r9, r9, #31 @ ... of 32 bytes
@@ -245,6 +253,11 @@
/* Preserve offset to relocated code. */
sub r6, r9, r6
+#ifndef CONFIG_ZBOOT_ROM
+ /* cache_clean_flush may use the stack, so relocate it */
+ add sp, sp, r6
+#endif
+
bl cache_clean_flush
adr r0, BSYM(restart)
@@ -333,7 +346,6 @@
LC0: .word LC0 @ r1
.word __bss_start @ r2
.word _end @ r3
- .word _start @ r5
.word _edata @ r6
.word _image_size @ r9
.word _got_start @ r11
@@ -1062,6 +1074,7 @@
#endif
.ltorg
+reloc_code_end:
.align
.section ".stack", "aw", %nobits
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 5309909..ea80abe 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -54,6 +54,7 @@
.bss : { *(.bss) }
_end = .;
+ . = ALIGN(8); /* the stack must be 64-bit aligned */
.stack : { *(.stack) }
.stab 0 : { *(.stab) }
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index a12b33c..9c49a46 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -185,14 +185,6 @@
},
};
-void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
-{
- unsigned int sz = SZ_1M >> PAGE_SHIFT;
-
- size[1] = size[0] - sz;
- size[0] = sz;
-}
-
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
* active IRQs causes the interrupt output to pulse, the upper levels
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 6ef33421..41df478 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -18,53 +18,67 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/arm_timer.h>
-/*
- * These timers are currently always setup to be clocked at 1MHz.
- */
-#define TIMER_FREQ_KHZ (1000)
-#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ)
-
-static void __iomem *clksrc_base;
-
-static cycle_t sp804_read(struct clocksource *cs)
+static long __init sp804_get_clock_rate(const char *name)
{
- return ~readl(clksrc_base + TIMER_VALUE);
+ struct clk *clk;
+ long rate;
+ int err;
+
+ clk = clk_get_sys("sp804", name);
+ if (IS_ERR(clk)) {
+ pr_err("sp804: %s clock not found: %d\n", name,
+ (int)PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ err = clk_enable(clk);
+ if (err) {
+ pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+ clk_put(clk);
+ return err;
+ }
+
+ rate = clk_get_rate(clk);
+ if (rate < 0) {
+ pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+ clk_disable(clk);
+ clk_put(clk);
+ }
+
+ return rate;
}
-static struct clocksource clocksource_sp804 = {
- .name = "timer3",
- .rating = 200,
- .read = sp804_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sp804_clocksource_init(void __iomem *base)
+void __init sp804_clocksource_init(void __iomem *base, const char *name)
{
- struct clocksource *cs = &clocksource_sp804;
+ long rate = sp804_get_clock_rate(name);
- clksrc_base = base;
+ if (rate < 0)
+ return;
/* setup timer 0 as free-running clocksource */
- writel(0, clksrc_base + TIMER_CTRL);
- writel(0xffffffff, clksrc_base + TIMER_LOAD);
- writel(0xffffffff, clksrc_base + TIMER_VALUE);
+ writel(0, base + TIMER_CTRL);
+ writel(0xffffffff, base + TIMER_LOAD);
+ writel(0xffffffff, base + TIMER_VALUE);
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- clksrc_base + TIMER_CTRL);
+ base + TIMER_CTRL);
- clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+ clocksource_mmio_init(base + TIMER_VALUE, name,
+ rate, 200, 32, clocksource_mmio_readl_down);
}
static void __iomem *clkevt_base;
+static unsigned long clkevt_reload;
/*
* IRQ handler for the timer
@@ -90,7 +104,7 @@
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+ writel(clkevt_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
break;
@@ -120,7 +134,6 @@
}
static struct clock_event_device sp804_clockevent = {
- .name = "timer0",
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
@@ -136,17 +149,24 @@
.dev_id = &sp804_clockevent,
};
-void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+ const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
+ long rate = sp804_get_clock_rate(name);
+
+ if (rate < 0)
+ return;
clkevt_base = base;
+ clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
- evt->irq = timer_irq;
- evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+ evt->name = name;
+ evt->irq = irq;
+ evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
- setup_irq(timer_irq, &sp804_timer_irq);
+ setup_irq(irq, &sp804_timer_irq);
clockevents_register_device(evt);
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 113085a..7aa4262 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,17 +22,16 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-#if defined(CONFIG_PM)
+#ifdef CONFIG_PM
/**
* struct vic_device - VIC PM device
- * @sysdev: The system device which is registered.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @resume_sources: A bitmask of interrupts for resume.
@@ -43,8 +42,6 @@
* @protect: Save for VIC_PROTECT.
*/
struct vic_device {
- struct sys_device sysdev;
-
void __iomem *base;
int irq;
u32 resume_sources;
@@ -59,11 +56,6 @@
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
-
-static inline struct vic_device *to_vic(struct sys_device *sys)
-{
- return container_of(sys, struct vic_device, sysdev);
-}
#endif /* CONFIG_PM */
/**
@@ -85,10 +77,9 @@
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
-#if defined(CONFIG_PM)
-static int vic_class_resume(struct sys_device *dev)
+#ifdef CONFIG_PM
+static void resume_one_vic(struct vic_device *vic)
{
- struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
@@ -107,13 +98,18 @@
writel(vic->soft_int, base + VIC_INT_SOFT);
writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
-
- return 0;
}
-static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+static void vic_resume(void)
{
- struct vic_device *vic = to_vic(dev);
+ int id;
+
+ for (id = vic_id - 1; id >= 0; id--)
+ resume_one_vic(vic_devices + id);
+}
+
+static void suspend_one_vic(struct vic_device *vic)
+{
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
@@ -128,14 +124,21 @@
writel(vic->resume_irqs, base + VIC_INT_ENABLE);
writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static int vic_suspend(void)
+{
+ int id;
+
+ for (id = 0; id < vic_id; id++)
+ suspend_one_vic(vic_devices + id);
return 0;
}
-struct sysdev_class vic_class = {
- .name = "vic",
- .suspend = vic_class_suspend,
- .resume = vic_class_resume,
+struct syscore_ops vic_syscore_ops = {
+ .suspend = vic_suspend,
+ .resume = vic_resume,
};
/**
@@ -147,30 +150,8 @@
*/
static int __init vic_pm_init(void)
{
- struct vic_device *dev = vic_devices;
- int err;
- int id;
-
- if (vic_id == 0)
- return 0;
-
- err = sysdev_class_register(&vic_class);
- if (err) {
- printk(KERN_ERR "%s: cannot register class\n", __func__);
- return err;
- }
-
- for (id = 0; id < vic_id; id++, dev++) {
- dev->sysdev.id = id;
- dev->sysdev.cls = &vic_class;
-
- err = sysdev_register(&dev->sysdev);
- if (err) {
- printk(KERN_ERR "%s: failed to register device\n",
- __func__);
- return err;
- }
- }
+ if (vic_id > 0)
+ register_syscore_ops(&vic_syscore_ops);
return 0;
}
diff --git a/arch/arm/configs/at91x40_defconfig b/arch/arm/configs/at91x40_defconfig
new file mode 100644
index 0000000..c55e921
--- /dev/null
+++ b/arch/arm/configs/at91x40_defconfig
@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 5ca7a61..abe61bf 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -38,7 +38,7 @@
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index fcaa603..7079cbe 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -37,7 +37,7 @@
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 0ce710f..cdd4d2b 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -32,7 +32,7 @@
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index ca51143..4200554 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -6,8 +6,10 @@
/*
* This is the maximum virtual address which can be DMA'd from.
*/
-#ifndef MAX_DMA_ADDRESS
+#ifndef ARM_DMA_ZONE_SIZE
#define MAX_DMA_ADDRESS 0xffffffff
+#else
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
#endif
#ifdef CONFIG_ISA_DMA_API
diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 21e75e3..4384d81 100644
--- a/arch/arm/include/asm/hardware/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
@@ -1,2 +1,2 @@
-void sp804_clocksource_init(void __iomem *);
-void sp804_clockevents_init(void __iomem *, unsigned int);
+void sp804_clocksource_init(void __iomem *, const char *);
+void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
diff --git a/arch/arm/include/asm/i8253.h b/arch/arm/include/asm/i8253.h
new file mode 100644
index 0000000..70656b6
--- /dev/null
+++ b/arch/arm/include/asm/i8253.h
@@ -0,0 +1,15 @@
+#ifndef __ASMARM_I8253_H
+#define __ASMARM_I8253_H
+
+/* i8253A PIT registers */
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
+
+extern raw_spinlock_t i8253_lock;
+
+#define outb_pit outb_p
+#define inb_pit inb_p
+
+#endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index bb8a19b..e46bdd0 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -39,10 +39,13 @@
struct kprobe;
typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+typedef unsigned long (kprobe_check_cc)(unsigned long);
+
/* Architecture specific copy of original instruction. */
struct arch_specific_insn {
kprobe_opcode_t *insn;
kprobe_insn_handler_t *insn_handler;
+ kprobe_check_cc *insn_check_cc;
};
struct prev_kprobe {
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 883f6be..d5adaae 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -34,7 +34,6 @@
* timer interrupt which may be pending.
*/
struct sys_timer {
- struct sys_device dev;
void (*init)(void);
void (*suspend)(void);
void (*resume)(void);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 431077c..af44a8f 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -209,14 +209,10 @@
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
-#ifndef ISA_DMA_THRESHOLD
+#ifndef ARM_DMA_ZONE_SIZE
#define ISA_DMA_THRESHOLD (0xffffffffULL)
-#endif
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(size,holes) do { } while (0)
-#elif !defined(CONFIG_ZONE_DMA)
-#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
+#else
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1)
#endif
/*
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index 316bb2b..154b89b 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -16,44 +16,6 @@
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
+#include <asm-generic/sizes.h>
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_16 0x00000010
-#define SZ_32 0x00000020
-#define SZ_64 0x00000040
-#define SZ_128 0x00000080
-#define SZ_256 0x00000100
-#define SZ_512 0x00000200
-
-#define SZ_1K 0x00000400
-#define SZ_2K 0x00000800
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_32K 0x00008000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_48M 0x03000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
+#define SZ_48M (SZ_32M + SZ_16M)
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 96ed521..a87664f 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -14,8 +14,6 @@
#include <linux/cpumask.h>
#include <linux/thread_info.h>
-#include <mach/smp.h>
-
#ifndef CONFIG_SMP
# error "<asm/smp.h> included in non-SMP build"
#endif
@@ -47,9 +45,9 @@
/*
- * Raise an IPI cross call on CPUs in callmap.
+ * Provide a function to raise an IPI cross call on CPUs in callmap.
*/
-extern void smp_cross_call(const struct cpumask *mask, int ipi);
+extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
/*
* Boot a secondary CPU, and assign it the specified idle task.
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 885be09..832888d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -159,7 +159,7 @@
#include <mach/barriers.h>
#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
#define mb() do { dsb(); outer_sync(); } while (0)
-#define rmb() dmb()
+#define rmb() dsb()
#define wmb() mb()
#else
#include <asm/memory.h>
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 2389131..15eeff6 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -34,9 +34,6 @@
*
* *) If the PC is written to by the instruction, the
* instruction must be fully simulated in software.
- * If it is a conditional instruction, the handler
- * will use insn[0] to copy its condition code to
- * set r0 to 1 and insn[1] to "mov pc, lr" to return.
*
* *) Otherwise, a modified form of the instruction is
* directly executed. Its handler calls the
@@ -68,13 +65,17 @@
#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos))
+
+/*
+ * Test if load/store instructions writeback the address register.
+ * if P (bit 24) == 0 or W (bit 21) == 1
+ */
+#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
+
#define PSR_fs (PSR_f|PSR_s)
#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */
-#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */
-
-#define truecc_insn(insn) (((insn) & 0xf0000000) | \
- (SET_R0_TRUE_INSTRUCTION & 0x0fffffff))
typedef long (insn_0arg_fn_t)(void);
typedef long (insn_1arg_fn_t)(long);
@@ -419,14 +420,10 @@
static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
long iaddr = (long)p->addr;
int disp = branch_displacement(insn);
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
if (insn & (1 << 24))
regs->ARM_lr = iaddr + 4;
@@ -446,14 +443,10 @@
static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
int rm = insn & 0xf;
long rmv = regs->uregs[rm];
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
if (insn & (1 << 5))
regs->ARM_lr = (long)p->addr + 4;
@@ -463,9 +456,16 @@
regs->ARM_cpsr |= PSR_T_BIT;
}
+static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ unsigned long mask = 0xf8ff03df; /* Mask out execution state */
+ regs->uregs[rd] = regs->ARM_cpsr & mask;
+}
+
static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
int rn = (insn >> 16) & 0xf;
int lbit = insn & (1 << 20);
@@ -476,9 +476,6 @@
int reg_bit_vector;
int reg_count;
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
reg_count = 0;
reg_bit_vector = insn & 0xffff;
while (reg_bit_vector) {
@@ -510,11 +507,6 @@
static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
-
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
regs->ARM_pc = (long)p->addr + str_pc_offset;
simulate_ldm1stm1(p, regs);
regs->ARM_pc = (long)p->addr + 4;
@@ -525,24 +517,16 @@
regs->uregs[12] = regs->uregs[13];
}
-static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rn = (insn >> 16) & 0xf;
- long rnv = regs->uregs[rn];
-
- /* Save Rn in case of writeback. */
- regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
-}
-
static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
{
insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
int rd = (insn >> 12) & 0xf;
int rn = (insn >> 16) & 0xf;
int rm = insn & 0xf; /* rm may be invalid, don't care. */
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
/* Not following the C calling convention here, so need asm(). */
__asm__ __volatile__ (
@@ -554,29 +538,36 @@
"str r0, %[rn] \n\t" /* in case of writeback */
"str r2, %[rd0] \n\t"
"str r3, %[rd1] \n\t"
- : [rn] "+m" (regs->uregs[rn]),
+ : [rn] "+m" (rnv),
[rd0] "=m" (regs->uregs[rd]),
[rd1] "=m" (regs->uregs[rd+1])
- : [rm] "m" (regs->uregs[rm]),
+ : [rm] "m" (rmv),
[cpsr] "r" (regs->ARM_cpsr),
[i_fn] "r" (i_fn)
: "r0", "r1", "r2", "r3", "lr", "cc"
);
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv;
}
static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
{
insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
int rd = (insn >> 12) & 0xf;
int rn = (insn >> 16) & 0xf;
int rm = insn & 0xf;
- long rnv = regs->uregs[rn];
- long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ /* rm/rmv may be invalid, don't care. */
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rnv_wb;
- regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
+ rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
regs->uregs[rd+1],
regs->ARM_cpsr, i_fn);
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv_wb;
}
static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
@@ -630,31 +621,6 @@
regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */
}
-static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
-{
- insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- union reg_pair fnr;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
-
- fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn);
- regs->uregs[rn] = fnr.r0;
- regs->uregs[rd] = fnr.r1;
-}
-
-static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- long rnv = regs->uregs[rn];
- long rdv = regs->uregs[rd];
-
- insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn);
-}
-
static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
{
insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
@@ -688,32 +654,32 @@
insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
}
-static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs)
{
- insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+}
+
+static void __kprobes
+emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
int rd = (insn >> 12) & 0xf;
+ long rdv = regs->uregs[rd];
- regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+ regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn);
}
-static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes
+emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
- int ird = (insn >> 12) & 0xf;
-
- insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rn = (insn >> 16) & 0xf;
+ int rd = (insn >> 12) & 0xf;
+ int rn = insn & 0xf;
+ long rdv = regs->uregs[rd];
long rnv = regs->uregs[rn];
- insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+ regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn);
}
static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
@@ -819,6 +785,17 @@
}
static void __kprobes
+emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
{
insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
@@ -854,14 +831,34 @@
insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn);
}
+static void __kprobes
+emulate_alu_tests(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rn = (insn >> 16) & 0xf;
+ int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn);
+}
+
static enum kprobe_insn __kprobes
prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
- int ibit = (insn & (1 << 26)) ? 25 : 22;
+ int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25))
+ : (~insn & (1 << 22));
+
+ if (is_writeback(insn) && is_r15(insn, 16))
+ return INSN_REJECTED; /* Writeback to PC */
insn &= 0xfff00fff;
insn |= 0x00001000; /* Rn = r0, Rd = r1 */
- if (insn & (1 << ibit)) {
+ if (not_imm) {
insn &= ~0xf;
insn |= 2; /* Rm = r2 */
}
@@ -871,8 +868,37 @@
}
static enum kprobe_insn __kprobes
+prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12_modify;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rn0_modify(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
+ insn &= 0xffff0ff0; /* Rd = r0 */
+ insn |= 0x00000001; /* Rn = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rn0_modify;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
asi->insn[0] = insn;
asi->insn_handler = emulate_rd12rm0;
@@ -880,18 +906,12 @@
}
static enum kprobe_insn __kprobes
-prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- insn &= 0xffff0fff; /* Rd = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
insn |= 0x00000001; /* Rm = r1 */
asi->insn[0] = insn;
@@ -903,6 +923,9 @@
prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 16))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */
insn |= 0x00000001; /* Rm = r1 */
asi->insn[0] = insn;
@@ -914,6 +937,9 @@
prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 16))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */
insn |= 0x00000102; /* Rs = r1, Rm = r2 */
asi->insn[0] = insn;
@@ -925,6 +951,9 @@
prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 16) || is_r15(insn, 12))
+ return INSN_REJECTED; /* RdHi or RdLo is PC */
+
insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */
insn |= 0x00001203; /* Rs = r2, Rm = r3 */
asi->insn[0] = insn;
@@ -945,20 +974,13 @@
static enum kprobe_insn __kprobes
space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
- /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */
- /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */
- /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */
- if ((insn & 0xfff30020) == 0xf1020000 ||
- (insn & 0xfe500f00) == 0xf8100a00 ||
- (insn & 0xfe5f0f00) == 0xf84d0500)
- return INSN_REJECTED;
-
- /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */
- if ((insn & 0xfd700000) == 0xf4500000) {
- insn &= 0xfff0ffff; /* Rn = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rn16;
- return INSN_GOOD;
+ /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */
+ /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */
+ /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */
+ /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfe300000) == 0xf4100000) {
+ asi->insn_handler = emulate_nop;
+ return INSN_GOOD_NO_SLOT;
}
/* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
@@ -967,41 +989,22 @@
return INSN_GOOD_NO_SLOT;
}
- /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
- /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
- if ((insn & 0xffff00f0) == 0xf1010000 ||
- (insn & 0xff000010) == 0xfe000000) {
- asi->insn[0] = insn;
- asi->insn_handler = emulate_none;
- return INSN_GOOD;
- }
+ /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
+ /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+ /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+
+ /* Coprocessor instructions... */
/* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
/* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
- if ((insn & 0xffe00000) == 0xfc400000) {
- insn &= 0xfff00fff; /* Rn = r0 */
- insn |= 0x00001000; /* Rd = r1 */
- asi->insn[0] = insn;
- asi->insn_handler =
- (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
- return INSN_GOOD;
- }
+ /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
- /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
- /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
- if ((insn & 0xfe000000) == 0xfc000000) {
- insn &= 0xfff0ffff; /* Rn = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_ldcstc;
- return INSN_GOOD;
- }
-
- /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
- /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
- insn &= 0xffff0fff; /* Rd = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
- return INSN_GOOD;
+ return INSN_REJECTED;
}
static enum kprobe_insn __kprobes
@@ -1010,19 +1013,18 @@
/* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
if ((insn & 0x0f900010) == 0x01000000) {
- /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
- /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
- if ((insn & 0x0ff000f0) == 0x01200020 ||
- (insn & 0x0fb000f0) == 0x01200000)
- return INSN_REJECTED;
-
- /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */
- if ((insn & 0x0fb00010) == 0x01000000)
- return prep_emulate_rd12(insn, asi);
+ /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01000000) {
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+ asi->insn_handler = simulate_mrs;
+ return INSN_GOOD_NO_SLOT;
+ }
/* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
if ((insn & 0x0ff00090) == 0x01400080)
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
+ asi);
/* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
/* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
@@ -1031,24 +1033,29 @@
return prep_emulate_rd16rs8rm0_wflags(insn, asi);
/* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
- /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */
+ if ((insn & 0x0ff00090) == 0x01000080 ||
+ (insn & 0x0ff000b0) == 0x01200080)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+ /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+ /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
+
+ /* Other instruction encodings aren't yet defined */
+ return INSN_REJECTED;
}
/* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
else if ((insn & 0x0f900090) == 0x01000010) {
- /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
- if ((insn & 0xfff000f0) == 0xe1200070)
- return INSN_REJECTED;
-
/* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
/* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
if ((insn & 0x0ff000d0) == 0x01200010) {
- asi->insn[0] = truecc_insn(insn);
+ if ((insn & 0x0ff000ff) == 0x0120003f)
+ return INSN_REJECTED; /* BLX pc */
asi->insn_handler = simulate_blx2bx;
- return INSN_GOOD;
+ return INSN_GOOD_NO_SLOT;
}
/* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
@@ -1059,17 +1066,27 @@
/* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
/* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
/* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ if ((insn & 0x0f9000f0) == 0x01000050)
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
+
+ /* Other instruction encodings aren't yet defined */
+ return INSN_REJECTED;
}
/* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
- else if ((insn & 0x0f000090) == 0x00000090) {
+ else if ((insn & 0x0f0000f0) == 0x00000090) {
/* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */
/* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
/* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */
/* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
/* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */
+ /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */
+ /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */
/* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */
/* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
/* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */
@@ -1078,13 +1095,15 @@
/* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
/* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */
/* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
- if ((insn & 0x0fe000f0) == 0x00000090) {
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
- } else if ((insn & 0x0fe000f0) == 0x00200090) {
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
- } else {
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
- }
+ if ((insn & 0x00d00000) == 0x00500000)
+ return INSN_REJECTED;
+ else if ((insn & 0x00e00000) == 0x00000000)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ else if ((insn & 0x00a00000) == 0x00200000)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ else
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
+ asi);
}
/* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
@@ -1092,23 +1111,45 @@
/* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
/* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
- /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
- /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
+ /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */
+ /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */
+ /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */
/* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
/* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
+ /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */
+ /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */
+ /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */
+
+ /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
/* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
/* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
/* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
/* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
- if ((insn & 0x0fb000f0) == 0x01000090) {
- /* SWP/SWPB */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ if ((insn & 0x0f0000f0) == 0x01000090) {
+ if ((insn & 0x0fb000f0) == 0x01000090) {
+ /* SWP/SWPB */
+ return prep_emulate_rd12rn16rm0_wflags(insn,
+ asi);
+ } else {
+ /* STREX/LDREX variants and unallocaed space */
+ return INSN_REJECTED;
+ }
+
} else if ((insn & 0x0e1000d0) == 0x00000d0) {
/* STRD/LDRD */
+ if ((insn & 0x0000e000) == 0x0000e000)
+ return INSN_REJECTED; /* Rd is LR or PC */
+ if (is_writeback(insn) && is_r15(insn, 16))
+ return INSN_REJECTED; /* Writeback to PC */
+
insn &= 0xfff00fff;
insn |= 0x00002000; /* Rn = r0, Rd = r2 */
- if (insn & (1 << 22)) {
- /* I bit */
+ if (!(insn & (1 << 22))) {
+ /* Register index */
insn &= ~0xf;
insn |= 1; /* Rm = r1 */
}
@@ -1118,6 +1159,9 @@
return INSN_GOOD;
}
+ /* LDRH/STRH/LDRSB/LDRSH */
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
return prep_emulate_ldr_str(insn, asi);
}
@@ -1125,7 +1169,7 @@
/*
* ALU op with S bit and Rd == 15 :
- * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
+ * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
if ((insn & 0x0e10f000) == 0x0010f000)
return INSN_REJECTED;
@@ -1154,22 +1198,61 @@
insn |= 0x00000200; /* Rs = r2 */
}
asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+
+ if ((insn & 0x0f900000) == 0x01100000) {
+ /*
+ * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx
+ * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx
+ * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx
+ * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx
+ */
+ asi->insn_handler = emulate_alu_tests;
+ } else {
+ /* ALU ops which write to Rd */
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_rwflags : emulate_alu_rflags;
+ }
return INSN_GOOD;
}
static enum kprobe_insn __kprobes
space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
+ /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0x0fb00000) == 0x03000000)
+ return prep_emulate_rd12_modify(insn, asi);
+
+ /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
+ if ((insn & 0x0fff0000) == 0x03200000) {
+ unsigned op2 = insn & 0x000000ff;
+ if (op2 == 0x01 || op2 == 0x04) {
+ /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
+ /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ } else if (op2 <= 0x03) {
+ /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
+ /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
+ /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
+ /*
+ * We make WFE and WFI true NOPs to avoid stalls due
+ * to missing events whilst processing the probe.
+ */
+ asi->insn_handler = emulate_nop;
+ return INSN_GOOD_NO_SLOT;
+ }
+ /* For DBG and unallocated hints it's safest to reject them */
+ return INSN_REJECTED;
+ }
+
/*
* MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
- * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
* ALU op with S bit and Rd == 15 :
* cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
- (insn & 0x0ff00000) == 0x03400000 || /* Undef */
(insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
return INSN_REJECTED;
@@ -1180,10 +1263,22 @@
* *S (bit 20) updates condition codes
* ADC/SBC/RSC reads the C flag
*/
- insn &= 0xffff0fff; /* Rd = r0 */
+ insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */
asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+
+ if ((insn & 0x0f900000) == 0x03100000) {
+ /*
+ * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx
+ * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx
+ * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx
+ * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx
+ */
+ asi->insn_handler = emulate_alu_tests_imm;
+ } else {
+ /* ALU ops which write to Rd */
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
+ }
return INSN_GOOD;
}
@@ -1192,6 +1287,8 @@
{
/* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
if ((insn & 0x0ff000f0) == 0x068000b0) {
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
insn |= 0x00000001; /* Rm = r1 */
asi->insn[0] = insn;
@@ -1205,6 +1302,8 @@
/* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
if ((insn & 0x0fa00030) == 0x06a00010 ||
(insn & 0x0fb000f0) == 0x06a00030) {
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
asi->insn[0] = insn;
asi->insn_handler = emulate_sat;
@@ -1213,57 +1312,101 @@
/* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
/* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+ /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
/* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
if ((insn & 0x0ff00070) == 0x06b00030 ||
- (insn & 0x0ff000f0) == 0x06f000b0)
+ (insn & 0x0ff00070) == 0x06f00030)
return prep_emulate_rd12rm0(insn, asi);
+ /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */
/* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
/* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
/* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
/* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
/* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */
/* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
/* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */
/* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */
/* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */
/* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */
/* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */
/* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */
/* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */
/* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */
/* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */
/* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */
/* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */
/* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */
+ /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */
/* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
/* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
/* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
/* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
/* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */
/* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
/* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */
/* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */
/* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */
/* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */
/* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */
/* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */
/* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */
/* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */
/* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */
/* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */
/* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */
/* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */
+ if ((insn & 0x0f800010) == 0x06000010) {
+ if ((insn & 0x00300000) == 0x00000000 ||
+ (insn & 0x000000e0) == 0x000000a0 ||
+ (insn & 0x000000e0) == 0x000000c0)
+ return INSN_REJECTED; /* Unallocated space */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
/* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */
/* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */
+ if ((insn & 0x0ff00030) == 0x06800010)
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+
/* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */
- /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */
+ /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */
/* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */
/* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */
/* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */
+ /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */
/* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */
/* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */
+ if ((insn & 0x0f8000f0) == 0x06800070) {
+ if ((insn & 0x00300000) == 0x00100000)
+ return INSN_REJECTED; /* Unallocated space */
+
+ if ((insn & 0x000f0000) == 0x000f0000)
+ return prep_emulate_rd12rm0(insn, asi);
+ else
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
+ /* Other instruction encodings aren't yet defined */
+ return INSN_REJECTED;
}
static enum kprobe_insn __kprobes
@@ -1273,29 +1416,49 @@
if ((insn & 0x0ff000f0) == 0x03f000f0)
return INSN_REJECTED;
- /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
- /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
- if ((insn & 0x0ff000f0) == 0x07800010)
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
-
/* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
/* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
if ((insn & 0x0ff00090) == 0x07400010)
return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
/* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
+ /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
/* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
+ /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */
/* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */
- /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
+ /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */
+ /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */
if ((insn & 0x0ff00090) == 0x07000010 ||
(insn & 0x0ff000d0) == 0x07500010 ||
- (insn & 0x0ff000d0) == 0x075000d0)
+ (insn & 0x0ff000f0) == 0x07800010) {
+
+ if ((insn & 0x0000f000) == 0x0000f000)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ else
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ }
+
+ /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ if ((insn & 0x0ff000d0) == 0x075000d0)
return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
- /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */
- /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
- /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */
+ /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */
+ if ((insn & 0x0fa00070) == 0x07a00050)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */
+ /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */
+ if ((insn & 0x0fe00070) == 0x07c00010) {
+
+ if ((insn & 0x0000000f) == 0x0000000f)
+ return prep_emulate_rd12_modify(insn, asi);
+ else
+ return prep_emulate_rd12rn0_modify(insn, asi);
+ }
+
+ return INSN_REJECTED;
}
static enum kprobe_insn __kprobes
@@ -1309,6 +1472,10 @@
/* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
/* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
/* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+
+ if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12))
+ return INSN_REJECTED; /* LDRB into PC */
+
return prep_emulate_ldr_str(insn, asi);
}
@@ -1323,10 +1490,9 @@
/* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
/* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
- asi->insn[0] = truecc_insn(insn);
asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
simulate_stm1_pc : simulate_ldm1stm1;
- return INSN_GOOD;
+ return INSN_GOOD_NO_SLOT;
}
static enum kprobe_insn __kprobes
@@ -1334,58 +1500,117 @@
{
/* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
/* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
- asi->insn[0] = truecc_insn(insn);
asi->insn_handler = simulate_bbl;
- return INSN_GOOD;
+ return INSN_GOOD_NO_SLOT;
}
static enum kprobe_insn __kprobes
-space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ /* Coprocessor instructions... */
/* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
/* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
- insn &= 0xfff00fff;
- insn |= 0x00001000; /* Rn = r0, Rd = r1 */
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
- return INSN_GOOD;
+ /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+
+ /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+
+ return INSN_REJECTED;
}
-static enum kprobe_insn __kprobes
-space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static unsigned long __kprobes __check_eq(unsigned long cpsr)
{
- /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
- /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
- insn &= 0xfff0ffff; /* Rn = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_ldcstc;
- return INSN_GOOD;
+ return cpsr & PSR_Z_BIT;
}
-static enum kprobe_insn __kprobes
-space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static unsigned long __kprobes __check_ne(unsigned long cpsr)
{
- /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
- /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
- if ((insn & 0xfff000f0) == 0xe1200070 ||
- (insn & 0x0f000000) == 0x0f000000)
- return INSN_REJECTED;
-
- /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
- if ((insn & 0x0f000010) == 0x0e000000) {
- asi->insn[0] = insn;
- asi->insn_handler = emulate_none;
- return INSN_GOOD;
- }
-
- /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
- /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
- insn &= 0xffff0fff; /* Rd = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
- return INSN_GOOD;
+ return (~cpsr) & PSR_Z_BIT;
}
+static unsigned long __kprobes __check_cs(unsigned long cpsr)
+{
+ return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_cc(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_mi(unsigned long cpsr)
+{
+ return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_pl(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_vs(unsigned long cpsr)
+{
+ return cpsr & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_vc(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_hi(unsigned long cpsr)
+{
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ls(unsigned long cpsr)
+{
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ge(unsigned long cpsr)
+{
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_lt(unsigned long cpsr)
+{
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_gt(unsigned long cpsr)
+{
+ unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_le(unsigned long cpsr)
+{
+ unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_al(unsigned long cpsr)
+{
+ return true;
+}
+
+static kprobe_check_cc * const condition_checks[16] = {
+ &__check_eq, &__check_ne, &__check_cs, &__check_cc,
+ &__check_mi, &__check_pl, &__check_vs, &__check_vc,
+ &__check_hi, &__check_ls, &__check_ge, &__check_lt,
+ &__check_gt, &__check_le, &__check_al, &__check_al
+};
+
/* Return:
* INSN_REJECTED If instruction is one not allowed to kprobe,
* INSN_GOOD If instruction is supported and uses instruction slot,
@@ -1401,133 +1626,45 @@
enum kprobe_insn __kprobes
arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ asi->insn_check_cc = condition_checks[insn>>28];
asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
- if ((insn & 0xf0000000) == 0xf0000000) {
+ if ((insn & 0xf0000000) == 0xf0000000)
return space_1111(insn, asi);
- } else if ((insn & 0x0e000000) == 0x00000000) {
+ else if ((insn & 0x0e000000) == 0x00000000)
return space_cccc_000x(insn, asi);
- } else if ((insn & 0x0e000000) == 0x02000000) {
+ else if ((insn & 0x0e000000) == 0x02000000)
return space_cccc_001x(insn, asi);
- } else if ((insn & 0x0f000010) == 0x06000010) {
+ else if ((insn & 0x0f000010) == 0x06000010)
return space_cccc_0110__1(insn, asi);
- } else if ((insn & 0x0f000010) == 0x07000010) {
+ else if ((insn & 0x0f000010) == 0x07000010)
return space_cccc_0111__1(insn, asi);
- } else if ((insn & 0x0c000000) == 0x04000000) {
+ else if ((insn & 0x0c000000) == 0x04000000)
return space_cccc_01xx(insn, asi);
- } else if ((insn & 0x0e000000) == 0x08000000) {
+ else if ((insn & 0x0e000000) == 0x08000000)
return space_cccc_100x(insn, asi);
- } else if ((insn & 0x0e000000) == 0x0a000000) {
+ else if ((insn & 0x0e000000) == 0x0a000000)
return space_cccc_101x(insn, asi);
- } else if ((insn & 0x0fe00000) == 0x0c400000) {
-
- return space_cccc_1100_010x(insn, asi);
-
- } else if ((insn & 0x0e000000) == 0x0c000000) {
-
- return space_cccc_110x(insn, asi);
-
- }
-
- return space_cccc_111x(insn, asi);
+ return space_cccc_11xx(insn, asi);
}
void __init arm_kprobe_decode_init(void)
{
find_str_pc_offset();
}
-
-
-/*
- * All ARM instructions listed below.
- *
- * Instructions and their general purpose registers are given.
- * If a particular register may not use R15, it is prefixed with a "!".
- * If marked with a "*" means the value returned by reading R15
- * is implementation defined.
- *
- * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ
- * TST: Rd, Rn, Rm, !Rs
- * BX: Rm
- * BLX(2): !Rm
- * BX: Rm (R15 legal, but discouraged)
- * BXJ: !Rm,
- * CLZ: !Rd, !Rm
- * CPY: Rd, Rm
- * LDC/2,STC/2 immediate offset & unindex: Rn
- * LDC/2,STC/2 immediate pre/post-indexed: !Rn
- * LDM(1/3): !Rn, register_list
- * LDM(2): !Rn, !register_list
- * LDR,STR,PLD immediate offset: Rd, Rn
- * LDR,STR,PLD register offset: Rd, Rn, !Rm
- * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm
- * LDR,STR immediate pre/post-indexed: Rd, !Rn
- * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm
- * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm
- * LDRB,STRB immediate offset: !Rd, Rn
- * LDRB,STRB register offset: !Rd, Rn, !Rm
- * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm
- * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn
- * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn
- * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn
- * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm
- * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn
- * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm
- * LDREX: !Rd, !Rn
- * MCR/2: !Rd
- * MCRR/2,MRRC/2: !Rd, !Rn
- * MLA: !Rd, !Rn, !Rm, !Rs
- * MOV: Rd
- * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register)
- * MRS,MSR: !Rd
- * MUL: !Rd, !Rm, !Rs
- * PKH{BT,TB}: !Rd, !Rn, !Rm
- * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn
- * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn
- * REV/16/SH: !Rd, !Rm
- * RFE: !Rn
- * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm
- * SEL: !Rd, !Rn, !Rm
- * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs
- * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs
- * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs
- * SSAT/16: !Rd, !Rm
- * STM(1/2): !Rn, register_list* (R15 in reg list not recommended)
- * STRT immediate pre/post-indexed: Rd*, !Rn
- * STRT register pre/post-indexed: Rd*, !Rn, !Rm
- * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm
- * STREX: !Rd, !Rn, !Rm
- * SWP/B: !Rd, !Rn, !Rm
- * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm
- * {S,U}XT{B,B16,H}: !Rd, !Rm
- * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs
- * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs
- *
- * May transfer control by writing R15 (possible mode changes or alternate
- * mode accesses marked by "*"):
- * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY,
- * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI*
- *
- * Instructions that do not take general registers, nor transfer control:
- * CDP/2, SETEND, SRS*
- */
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 2ba7deb..1656c875 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -134,7 +134,8 @@
struct kprobe_ctlblk *kcb)
{
regs->ARM_pc += 4;
- p->ainsn.insn_handler(p, regs);
+ if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
+ p->ainsn.insn_handler(p, regs);
}
/*
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
index 31a316c..0f107dc 100644
--- a/arch/arm/kernel/leds.c
+++ b/arch/arm/kernel/leds.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/leds.h>
@@ -69,29 +70,8 @@
static SYSDEV_ATTR(event, 0200, NULL, leds_store);
-static int leds_suspend(struct sys_device *dev, pm_message_t state)
-{
- leds_event(led_stop);
- return 0;
-}
-
-static int leds_resume(struct sys_device *dev)
-{
- leds_event(led_start);
- return 0;
-}
-
-static int leds_shutdown(struct sys_device *dev)
-{
- leds_event(led_halted);
- return 0;
-}
-
static struct sysdev_class leds_sysclass = {
.name = "leds",
- .shutdown = leds_shutdown,
- .suspend = leds_suspend,
- .resume = leds_resume,
};
static struct sys_device leds_device = {
@@ -99,6 +79,28 @@
.cls = &leds_sysclass,
};
+static int leds_suspend(void)
+{
+ leds_event(led_stop);
+ return 0;
+}
+
+static void leds_resume(void)
+{
+ leds_event(led_start);
+}
+
+static void leds_shutdown(void)
+{
+ leds_event(led_halted);
+}
+
+static struct syscore_ops leds_syscore_ops = {
+ .shutdown = leds_shutdown,
+ .suspend = leds_suspend,
+ .resume = leds_resume,
+};
+
static int __init leds_init(void)
{
int ret;
@@ -107,6 +109,8 @@
ret = sysdev_register(&leds_device);
if (ret == 0)
ret = sysdev_create_file(&leds_device, &attr_event);
+ if (ret == 0)
+ register_syscore_ops(&leds_syscore_ops);
return ret;
}
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 979da39..139e3c8 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -746,7 +746,8 @@
tail = (struct frame_tail __user *)regs->ARM_fp - 1;
- while (tail && !((unsigned long)tail & 0x3))
+ while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+ tail && !((unsigned long)tail & 0x3))
tail = user_backtrace(tail, entry);
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 2bf27f3..8182f45 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -767,12 +767,20 @@
#ifdef CONFIG_HAVE_HW_BREAKPOINT
case PTRACE_GETHBPREGS:
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
ret = ptrace_gethbpregs(child, addr,
(unsigned long __user *)data);
+ ptrace_put_breakpoints(child);
break;
case PTRACE_SETHBPREGS:
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
ret = ptrace_sethbpregs(child, addr,
(unsigned long __user *)data);
+ ptrace_put_breakpoints(child);
break;
#endif
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index cb83983..0340224 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -597,19 +597,13 @@
return err;
}
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
- regs->ARM_r0 = regs->ARM_ORIG_r0;
- regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-}
-
/*
* OK, we're invoking a handler
*/
static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
- struct pt_regs * regs, int syscall)
+ struct pt_regs * regs)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
@@ -617,26 +611,6 @@
int ret;
/*
- * If we were from a system call, check for system call restarting...
- */
- if (syscall) {
- switch (regs->ARM_r0) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->ARM_r0 = -EINTR;
- break;
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->ARM_r0 = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- setup_syscall_restart(regs);
- }
- }
-
- /*
* translate the signal
*/
if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
@@ -685,6 +659,7 @@
*/
static void do_signal(struct pt_regs *regs, int syscall)
{
+ unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
struct k_sigaction ka;
siginfo_t info;
int signr;
@@ -698,18 +673,61 @@
if (!user_mode(regs))
return;
+ /*
+ * If we were from a system call, check for system call restarting...
+ */
+ if (syscall) {
+ continue_addr = regs->ARM_pc;
+ restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
+ retval = regs->ARM_r0;
+
+ /*
+ * Prepare for system call restart. We do this here so that a
+ * debugger will see the already changed PSW.
+ */
+ switch (retval) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->ARM_r0 = regs->ARM_ORIG_r0;
+ regs->ARM_pc = restart_addr;
+ break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
+ }
+ }
+
if (try_to_freeze())
goto no_signal;
+ /*
+ * Get the signal to deliver. When running under ptrace, at this
+ * point the debugger may change all our registers ...
+ */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
sigset_t *oldset;
+ /*
+ * Depending on the signal settings we may need to revert the
+ * decision to restart the system call. But skip this if a
+ * debugger has chosen to restart at a different PC.
+ */
+ if (regs->ARM_pc == restart_addr) {
+ if (retval == -ERESTARTNOHAND
+ || (retval == -ERESTARTSYS
+ && !(ka.sa.sa_flags & SA_RESTART))) {
+ regs->ARM_r0 = -EINTR;
+ regs->ARM_pc = continue_addr;
+ }
+ }
+
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
- if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
@@ -723,11 +741,14 @@
}
no_signal:
- /*
- * No signal to deliver to the process - restart the syscall.
- */
if (syscall) {
- if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
+ /*
+ * Handle restarting a different system call. As above,
+ * if a debugger has chosen to restart at a different PC,
+ * ignore the restart.
+ */
+ if (retval == -ERESTART_RESTARTBLOCK
+ && regs->ARM_pc == continue_addr) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
regs->ARM_pc -= 2;
@@ -750,11 +771,6 @@
#endif
}
}
- if (regs->ARM_r0 == -ERESTARTNOHAND ||
- regs->ARM_r0 == -ERESTARTSYS ||
- regs->ARM_r0 == -ERESTARTNOINTR) {
- setup_syscall_restart(regs);
- }
/* If there's no signal to deliver, we just put the saved sigmask
* back.
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8fe05ad..d439a8f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -376,6 +376,13 @@
}
}
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+
+void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
+{
+ smp_cross_call = fn;
+}
+
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_cross_call(mask, IPI_CALL_FUNC);
@@ -479,7 +486,7 @@
{
}
-static void broadcast_timer_setup(struct clock_event_device *evt)
+static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
{
evt->name = "dummy_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT |
@@ -560,10 +567,7 @@
break;
case IPI_RESCHEDULE:
- /*
- * nothing more to do - eveything is
- * done on the interrupt return path
- */
+ scheduler_ipi();
break;
case IPI_CALL_FUNC:
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 4ad8da1..af0aaeb 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -311,7 +311,7 @@
long err;
int i;
- if (nsops < 1)
+ if (nsops < 1 || nsops > SEMOPM)
return -EINVAL;
sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
if (!sops)
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 1ff46ca..cb634c3 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,7 +21,7 @@
#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/profile.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/timer.h>
#include <linux/irq.h>
@@ -115,48 +115,37 @@
#endif
#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(struct sys_device *dev, pm_message_t state)
+static int timer_suspend(void)
{
- struct sys_timer *timer = container_of(dev, struct sys_timer, dev);
-
- if (timer->suspend != NULL)
- timer->suspend();
+ if (system_timer->suspend)
+ system_timer->suspend();
return 0;
}
-static int timer_resume(struct sys_device *dev)
+static void timer_resume(void)
{
- struct sys_timer *timer = container_of(dev, struct sys_timer, dev);
-
- if (timer->resume != NULL)
- timer->resume();
-
- return 0;
+ if (system_timer->resume)
+ system_timer->resume();
}
#else
#define timer_suspend NULL
#define timer_resume NULL
#endif
-static struct sysdev_class timer_sysclass = {
- .name = "timer",
+static struct syscore_ops timer_syscore_ops = {
.suspend = timer_suspend,
.resume = timer_resume,
};
-static int __init timer_init_sysfs(void)
+static int __init timer_init_syscore_ops(void)
{
- int ret = sysdev_class_register(&timer_sysclass);
- if (ret == 0) {
- system_timer->dev.cls = &timer_sysclass;
- ret = sysdev_register(&system_timer->dev);
- }
+ register_syscore_ops(&timer_syscore_ops);
- return ret;
+ return 0;
}
-device_initcall(timer_init_sysfs);
+device_initcall(timer_init_syscore_ops);
void __init time_init(void)
{
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 3b54ad1..d52eec2 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -234,7 +234,6 @@
printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
- sysfs_printk_last_file();
/* trap and error numbers are mostly meaningless on ARM */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 1939023..2d299bf 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -83,6 +83,7 @@
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
config ARCH_AT572D940HF
bool "AT572D940HF"
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 1f9d3cb..d8df59a 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -30,6 +30,11 @@
#include <mach/board.h>
#include "generic.h"
+static void __init at91eb01_init_irq(void)
+{
+ at91x40_init_interrupts(NULL);
+}
+
static void __init at91eb01_map_io(void)
{
at91x40_initialize(40000000);
@@ -38,7 +43,7 @@
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.timer = &at91x40_timer,
- .init_irq = at91x40_init_interrupts,
+ .init_irq = at91eb01_init_irq,
.map_io = at91eb01_map_io,
MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 3bef931..0700f21 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -27,6 +27,7 @@
#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5 0x819a05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -55,6 +56,12 @@
#define ARCH_EXID_AT91SAM9G46 0x00000003
#define ARCH_EXID_AT91SAM9G45 0x00000004
+#define ARCH_EXID_AT91SAM9G15 0x00000000
+#define ARCH_EXID_AT91SAM9G35 0x00000001
+#define ARCH_EXID_AT91SAM9X35 0x00000002
+#define ARCH_EXID_AT91SAM9G25 0x00000003
+#define ARCH_EXID_AT91SAM9X25 0x00000004
+
static inline unsigned long at91_exid_identify(void)
{
return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@
#define cpu_is_at91sam9m11() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5() (0)
+#define cpu_is_at91sam9g15() (0)
+#define cpu_is_at91sam9g35() (0)
+#define cpu_is_at91sam9x35() (0)
+#define cpu_is_at91sam9g25() (0)
+#define cpu_is_at91sam9x25() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 73eb066..a604b9e 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -169,6 +169,7 @@
/* Maintainer: Broadcom Corporation */
.fixup = bcmring_fixup,
.map_io = bcmring_map_io,
+ .init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
.init_machine = bcmring_init_machine
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 8fc2035..43eadbcc 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -28,8 +28,6 @@
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
#include <linux/clkdev.h>
#include <mach/csp/mm_addr.h>
@@ -37,6 +35,7 @@
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -97,6 +96,35 @@
.mode = CLK_MODE_XTAL,
};
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+static struct clk sp804_timer012_clk = {
+ .name = "sp804-timer-0,1,2",
+ .type = CLK_TYPE_PRIMARY,
+ .mode = CLK_MODE_XTAL,
+ .rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
+};
+
+static struct clk sp804_timer3_clk = {
+ .name = "sp804-timer-3",
+ .type = CLK_TYPE_PRIMARY,
+ .mode = CLK_MODE_XTAL,
+ .rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
+};
+
static struct clk_lookup lookups[] = {
{ /* Bus clock */
.con_id = "apb_pclk",
@@ -107,6 +135,18 @@
}, { /* UART1 */
.dev_id = "uartb",
.clk = &uart_clk,
+ }, { /* SP804 timer 0 */
+ .dev_id = "sp804",
+ .con_id = "timer0",
+ .clk = &sp804_timer012_clk,
+ }, { /* SP804 timer 1 */
+ .dev_id = "sp804",
+ .con_id = "timer1",
+ .clk = &sp804_timer012_clk,
+ }, { /* SP804 timer 3 */
+ .dev_id = "sp804",
+ .con_id = "timer3",
+ .clk = &sp804_timer3_clk,
}
};
@@ -151,8 +191,6 @@
chipcHw_busInterfaceClockEnable(bus_clock);
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
@@ -162,170 +200,18 @@
/*
* Where is the timer (VA)?
*/
-#define TIMER0_VA_BASE MM_IO_BASE_TMR
-#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
-#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
-#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
-
-/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
-#if defined(CONFIG_ARCH_FPGA11107)
-/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
-/* slow down Linux's sense of time */
-#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
-#else
-#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
-#endif
-
-#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
-#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
-#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
-#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD (TIMER_INTERVAL)
-#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
-#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- unsigned long ctrl;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
-
- ctrl = TIMER_CTRL_PERIODIC;
- ctrl |=
- TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
- TIMER_CTRL_ENABLE;
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* period set, and timer enabled in 'next_event' hook */
- ctrl = TIMER_CTRL_ONESHOT;
- ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- default:
- ctrl = 0;
- }
-
- writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
-
- writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
- writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
-
- return 0;
-}
-
-static struct clock_event_device timer0_clockevent = {
- .name = "timer0",
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = timer_set_mode,
- .set_next_event = timer_set_next_event,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &timer0_clockevent;
-
- writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction bcmring_timer_irq = {
- .name = "bcmring Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = bcmring_timer_interrupt,
-};
-
-static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
-{
- return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
-}
-
-static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
-{
- return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_bcmring_timer1 = {
- .name = "timer1",
- .rating = 200,
- .read = bcmring_get_cycles_timer1,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static struct clocksource clocksource_bcmring_timer3 = {
- .name = "timer3",
- .rating = 100,
- .read = bcmring_get_cycles_timer3,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+#define TIMER0_VA_BASE ((void __iomem *)MM_IO_BASE_TMR)
+#define TIMER1_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x20))
+#define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40))
+#define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
static int __init bcmring_clocksource_init(void)
{
/* setup timer1 as free-running clocksource */
- writel(0, TIMER1_VA_BASE + TIMER_CTRL);
- writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
- writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
- writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- TIMER1_VA_BASE + TIMER_CTRL);
-
- clocksource_register_khz(&clocksource_bcmring_timer1,
- TIMER1_FREQUENCY_MHZ * 1000);
+ sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
/* setup timer3 as free-running clocksource */
- writel(0, TIMER3_VA_BASE + TIMER_CTRL);
- writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
- writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
- writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- TIMER3_VA_BASE + TIMER_CTRL);
-
- clocksource_register_khz(&clocksource_bcmring_timer3,
- TIMER3_FREQUENCY_KHZ);
+ sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
return 0;
}
@@ -347,21 +233,16 @@
/*
* Make irqs happen for the system timer
*/
- setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
-
bcmring_clocksource_init();
- timer0_clockevent.mult =
- div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
- timer0_clockevent.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &timer0_clockevent);
- timer0_clockevent.min_delta_ns =
- clockevent_delta2ns(0xf, &timer0_clockevent);
-
- timer0_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&timer0_clockevent);
+ sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {
.init = bcmring_init_timer,
};
+
+void __init bcmring_init_early(void)
+{
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
index b197ba4..e0e02c4 100644
--- a/arch/arm/mach-bcmring/core.h
+++ b/arch/arm/mach-bcmring/core.h
@@ -25,6 +25,7 @@
void __init bcmring_amba_init(void);
void __init bcmring_map_io(void);
void __init bcmring_init_irq(void);
+void __init bcmring_init_early(void);
extern struct sys_timer bcmring_timer;
#endif
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32f1479..c0deaca 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -63,6 +63,7 @@
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@@ -72,6 +73,7 @@
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@
select MACH_DAVINCI_DM6467TEVM
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@@ -118,6 +121,7 @@
depends on ARCH_DAVINCI_DM365
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@@ -129,6 +133,7 @@
select GPIO_PCF857X
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@@ -205,6 +210,7 @@
depends on ARCH_DAVINCI_DA850
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2aa79c5..606a6f2 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -29,7 +29,7 @@
#include <mach/mux.h>
#include <mach/spi.h>
-#define MITYOMAPL138_PHY_ID "0:03"
+#define MITYOMAPL138_PHY_ID ""
#define FACTORY_CONFIG_MAGIC 0x012C0138
#define FACTORY_CONFIG_VERSION 0x00010001
@@ -414,7 +414,7 @@
static struct platform_device mityomapl138_nandflash_device = {
.name = "davinci_nand",
- .id = 0,
+ .id = 1,
.dev = {
.platform_data = &mityomapl138_nandflash_data,
},
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 0a95be1..41669ec 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -94,9 +94,7 @@
if (freqs.old == freqs.new)
return ret;
- cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
- dev_driver_string(cpufreq.dev),
- "transition: %u --> %u\n", freqs.old, freqs.new);
+ dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
freqs.new, relation, &idx);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 625d4b6..58a02dc 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -39,7 +39,8 @@
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_SPI0_BASE 0x01c41000
-#define DA8XX_SPI1_BASE 0x01f0e000
+#define DA830_SPI1_BASE 0x01e12000
+#define DA850_SPI1_BASE 0x01f0e000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
@@ -762,8 +763,8 @@
static struct resource da8xx_spi1_resources[] = {
[0] = {
- .start = DA8XX_SPI1_BASE,
- .end = DA8XX_SPI1_BASE + SZ_4K - 1,
+ .start = DA830_SPI1_BASE,
+ .end = DA830_SPI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -832,5 +833,10 @@
da8xx_spi_pdata[instance].num_chipselect = len;
+ if (instance == 1 && cpu_is_davinci_da850()) {
+ da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+ da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+ }
+
return platform_device_register(&da8xx_spi_device[instance]);
}
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9f1befc..f8b7ea4 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,6 +24,9 @@
#define UART_SHIFT 2
+#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
@@ -34,7 +37,7 @@
/* Use davinci_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
- ldreq \rp, =__virt_to_phys(davinci_uart_phys)
+ ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rp, =davinci_uart_phys
add \rv, \rp, #4 @ davinci_uart_virt
ldr \rp, [\rp, #0]
@@ -48,18 +51,18 @@
tst \rp, #1 @ MMU enabled?
/* Copy uart phys address from decompressor uart info */
- ldreq \rv, =__virt_to_phys(davinci_uart_phys)
+ ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rv, =davinci_uart_phys
ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #0]
str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */
- ldreq \rv, =__virt_to_phys(davinci_uart_virt)
+ ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
ldrne \rv, =davinci_uart_virt
ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #4]
str \rp, [\rv]
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 7882272..491249e 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -41,27 +41,11 @@
*/
#define CONSISTENT_DMA_SIZE (14<<20)
-#ifndef __ASSEMBLY__
/*
* Restrict DMA-able region to workaround silicon bug. The bug
* restricts buffers available for DMA to video hardware to be
* below 128M
*/
-static inline void
-__arch_adjust_zones(unsigned long *size, unsigned long *holes)
-{
- unsigned int sz = (128<<20) >> PAGE_SHIFT;
-
- size[1] = size[0] - sz;
- size[0] = sz;
-}
-
-#define arch_adjust_zones(zone_size, holes) \
- if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20))
-
-#endif
+#define ARM_DMA_ZONE_SIZE SZ_128M
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 8051110..c9e6ce1 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -22,7 +22,7 @@
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
*/
-#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-exynos4/include/mach/smp.h b/arch/arm/mach-exynos4/include/mach/smp.h
deleted file mode 100644
index a463dce..0000000
--- a/arch/arm/mach-exynos4/include/mach/smp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/smp.h
- *
- * Cloned from arch/arm/mach-realview/include/mach/smp.h
-*/
-
-#ifndef ASM_ARCH_SMP_H
-#define ASM_ARCH_SMP_H __FILE__
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 6d35878..c5e65a0 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
@@ -104,7 +105,7 @@
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -147,6 +148,8 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 10d917d..8755ca8 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
@@ -372,7 +373,27 @@
flush_cache_all();
}
-static int exynos4_pm_resume(struct sys_device *dev)
+static struct sysdev_driver exynos4_pm_driver = {
+ .add = exynos4_pm_add,
+};
+
+static __init int exynos4_pm_drvinit(void)
+{
+ unsigned int tmp;
+
+ s3c_pm_init();
+
+ /* All wakeup disable */
+
+ tmp = __raw_readl(S5P_WAKEUP_MASK);
+ tmp |= ((0xFF << 8) | (0x1F << 1));
+ __raw_writel(tmp, S5P_WAKEUP_MASK);
+
+ return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+}
+arch_initcall(exynos4_pm_drvinit);
+
+static void exynos4_pm_resume(void)
{
/* For release retention */
@@ -394,27 +415,15 @@
/* enable L2X0*/
writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
#endif
-
- return 0;
}
-static struct sysdev_driver exynos4_pm_driver = {
- .add = exynos4_pm_add,
+static struct syscore_ops exynos4_pm_syscore_ops = {
.resume = exynos4_pm_resume,
};
-static __init int exynos4_pm_drvinit(void)
+static __init int exynos4_pm_syscore_init(void)
{
- unsigned int tmp;
-
- s3c_pm_init();
-
- /* All wakeup disable */
-
- tmp = __raw_readl(S5P_WAKEUP_MASK);
- tmp |= ((0xFF << 8) | (0x1F << 1));
- __raw_writel(tmp, S5P_WAKEUP_MASK);
-
- return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+ register_syscore_ops(&exynos4_pm_syscore_ops);
+ return 0;
}
-arch_initcall(exynos4_pm_drvinit);
+arch_initcall(exynos4_pm_syscore_init);
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index bdd2579..46adca0 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -4,6 +4,7 @@
config ARCH_CATS
bool "CATS"
+ select CLKSRC_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
@@ -59,6 +60,7 @@
config ARCH_NETWINDER
bool "NetWinder"
+ select CLKSRC_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 441c6ce..7020f1a 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -10,53 +10,16 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <linux/timex.h>
#include <asm/irq.h>
-
+#include <asm/i8253.h>
#include <asm/mach/time.h>
#include "common.h"
-#define PIT_MODE 0x43
-#define PIT_CH0 0x40
-
-#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
-
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- static int old_count;
- static u32 old_jifs;
- int count;
- u32 jifs;
-
- raw_local_irq_save(flags);
-
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- if (count > old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_local_irq_restore(flags);
-
- count = (PIT_LATCH - 1) - count;
-
- return (cycle_t)(jifs * PIT_LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
-};
+DEFINE_RAW_SPINLOCK(i8253_lock);
static void pit_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
@@ -121,7 +84,7 @@
pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
- clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
+ clocksource_i8253_init();
setup_irq(pit_ce.irq, &pit_timer_irq);
clockevents_register_device(&pit_ce);
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
index 9d36876..b0b3bae 100644
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -13,7 +13,6 @@
* There should not be more than (0xd0000000 - 0xc0000000)
* bytes of RAM.
*/
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
+#define ARM_DMA_ZONE_SIZE SZ_256M
#endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index d701d32..dfd18f3 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -4,6 +4,7 @@
config ARCH_INTEGRATOR_AP
bool "Support Integrator/AP and Integrator/PP2 platforms"
+ select CLKSRC_MMIO
select MIGHT_HAVE_PCI
help
Include support for the ARM(R) Integrator/AP and
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 980803f..2fbbdd5 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -24,13 +24,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -43,7 +44,6 @@
#include <mach/lm.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -180,13 +180,13 @@
#ifdef CONFIG_PM
static unsigned long ic_irq_enable;
-static int irq_suspend(struct sys_device *dev, pm_message_t state)
+static int irq_suspend(void)
{
ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
return 0;
}
-static int irq_resume(struct sys_device *dev)
+static void irq_resume(void)
{
/* disable all irq sources */
writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
@@ -194,33 +194,25 @@
writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET);
- return 0;
}
#else
#define irq_suspend NULL
#define irq_resume NULL
#endif
-static struct sysdev_class irq_class = {
- .name = "irq",
+static struct syscore_ops irq_syscore_ops = {
.suspend = irq_suspend,
.resume = irq_resume,
};
-static struct sys_device irq_device = {
- .id = 0,
- .cls = &irq_class,
-};
-
-static int __init irq_init_sysfs(void)
+static int __init irq_syscore_init(void)
{
- int ret = sysdev_class_register(&irq_class);
- if (ret == 0)
- ret = sysdev_register(&irq_device);
- return ret;
+ register_syscore_ops(&irq_syscore_ops);
+
+ return 0;
}
-device_initcall(irq_init_sysfs);
+device_initcall(irq_syscore_init);
/*
* Flash handling.
@@ -230,7 +222,7 @@
#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-static int ap_flash_init(void)
+static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
@@ -247,7 +239,7 @@
return 0;
}
-static void ap_flash_exit(void)
+static void ap_flash_exit(struct platform_device *dev)
{
u32 tmp;
@@ -263,15 +255,14 @@
}
}
-static void ap_flash_set_vpp(int on)
+static void ap_flash_set_vpp(struct platform_device *pdev, int on)
{
void __iomem *reg = on ? SC_CTRLS : SC_CTRLC;
writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg);
}
-static struct flash_platform_data ap_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data ap_flash_data = {
.width = 4,
.init = ap_flash_init,
.exit = ap_flash_exit,
@@ -285,7 +276,7 @@
};
static struct platform_device cfi_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &ap_flash_data,
@@ -343,25 +334,9 @@
static unsigned long timer_reload;
-static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
-
-static cycle_t timersp_read(struct clocksource *cs)
-{
- return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
-}
-
-static struct clocksource clocksource_timersp = {
- .name = "timer2",
- .rating = 200,
- .read = timersp_read,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void integrator_clocksource_init(u32 khz)
{
- struct clocksource *cs = &clocksource_timersp;
- void __iomem *base = clksrc_base;
+ void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
u32 ctrl = TIMER_CTRL_ENABLE;
if (khz >= 1500) {
@@ -372,7 +347,8 @@
writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
- clocksource_register_khz(cs, khz);
+ clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+ khz * 1000, 200, 16, clocksource_mmio_readl_down);
}
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 9e3ce26..4eb03ab 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -35,7 +36,6 @@
#include <mach/lm.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -229,17 +229,24 @@
.vcoreg = CM_AUXOSC,
};
+static struct clk sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk_lookup cp_lookups[] = {
{ /* CLCD */
.dev_id = "mb:c0",
.clk = &cp_auxclk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .clk = &sp804_clk,
},
};
/*
* Flash handling.
*/
-static int intcp_flash_init(void)
+static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
@@ -250,7 +257,7 @@
return 0;
}
-static void intcp_flash_exit(void)
+static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
@@ -259,7 +266,7 @@
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
-static void intcp_flash_set_vpp(int on)
+static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
@@ -271,8 +278,7 @@
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
-static struct flash_platform_data intcp_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
@@ -286,7 +292,7 @@
};
static struct platform_device intcp_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &intcp_flash_data,
@@ -476,8 +482,8 @@
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
- sp804_clocksource_init(TIMER2_VA_BASE);
- sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
+ sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
+ sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
}
static struct sys_timer cp_timer = {
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index a54b3db..e9a5893 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -342,29 +342,6 @@
return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
}
-/*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init ixp4xx_adjust_zones(unsigned long *zone_size,
- unsigned long *zhole_size)
-{
- unsigned int sz = SZ_64M >> PAGE_SHIFT;
-
- /*
- * Only adjust if > 64M on current system
- */
- if (zone_size[0] <= sz)
- return;
-
- zone_size[1] = zone_size[0] - sz;
- zone_size[0] = sz;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
-}
-
void __init ixp4xx_pci_preinit(void)
{
unsigned long cpuid = read_cpuid_id();
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index ed19bc3..74ed81a 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -419,26 +419,14 @@
/*
* clocksource
*/
-static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
-{
- return *IXP4XX_OSTS;
-}
-
-static struct clocksource clocksource_ixp4xx = {
- .name = "OSTS",
- .rating = 200,
- .read = ixp4xx_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
- clocksource_register_hz(&clocksource_ixp4xx, ixp4xx_timer_freq);
+ clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32,
+ clocksource_mmio_readl_up);
}
/*
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 6d388c9..34e7940 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -14,16 +14,8 @@
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(size, holes) \
- ixp4xx_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (SZ_64M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
-
+#ifdef CONFIG_PCI
+#define ARM_DMA_ZONE_SIZE SZ_64M
#endif
#endif
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index 6162ac3..b42c909b 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -31,19 +31,6 @@
#include <mach/platform.h>
#include "common.h"
-static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
-{
- return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE));
-}
-
-static struct clocksource lpc32xx_clksrc = {
- .name = "lpc32xx_clksrc",
- .rating = 300,
- .read = lpc32xx_clksrc_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int lpc32xx_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
@@ -170,7 +157,9 @@
__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- clocksource_register_hz(&lpc32xx_clksrc, clkrate);
+
+ clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
+ "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
}
struct sys_timer lpc32xx_timer = {
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
deleted file mode 100644
index 3c01000e..0000000
--- a/arch/arm/mach-msm/include/mach/smp.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SMP_H
-#define __ASM_ARCH_MSM_SMP_H
-
-#include <asm/hardware/gic.h>
-
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 0f427bc..2034098 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -119,7 +119,7 @@
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -151,6 +151,8 @@
for (i = 0; i < NR_CPUS; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index 2cf390f..47a69cb 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -257,11 +257,16 @@
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id,
+ MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY,
+ .init = vpr200_usbh_init,
+ .portsc = MXC_EHCI_MODE_SERIAL,
};
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 10a1bea..6206b11 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -193,7 +193,7 @@
.wakeup = wake, \
}
-static const struct gpio_keys_button loco_buttons[] __initconst = {
+static struct gpio_keys_button loco_buttons[] = {
GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 1ad97fe..5dcc59d 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -295,11 +295,11 @@
unsigned long diff, parent_rate, calc_rate; \
int i; \
\
- parent_rate = clk_get_rate(clk->parent); \
div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
bm_busy = BM_CLKCTRL_##dr##_BUSY; \
\
if (clk->parent == &ref_xtal_clk) { \
+ parent_rate = clk_get_rate(clk->parent); \
div = DIV_ROUND_UP(parent_rate, rate); \
if (clk == &cpu_clk) { \
div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \
@@ -309,6 +309,11 @@
if (div == 0 || div > div_max) \
return -EINVAL; \
} else { \
+ /* \
+ * hack alert: this block modifies clk->parent, too, \
+ * so the base to use it the grand parent. \
+ */ \
+ parent_rate = clk_get_rate(clk->parent->parent); \
rate >>= PARENT_RATE_SHIFT; \
parent_rate >>= PARENT_RATE_SHIFT; \
diff = parent_rate; \
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 13647f3..cace0d2 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -101,11 +101,6 @@
& 0xffff0000) >> 16);
}
-static cycle_t timrotv2_get_cycles(struct clocksource *cs)
-{
- return ~__raw_readl(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
-}
-
static int timrotv1_set_next_event(unsigned long evt,
struct clock_event_device *dev)
{
@@ -230,8 +225,8 @@
static struct clocksource clocksource_mxs = {
.name = "mxs_timer",
.rating = 200,
- .read = timrotv2_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
+ .read = timrotv1_get_cycles,
+ .mask = CLOCKSOURCE_MASK(16),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -239,12 +234,11 @@
{
unsigned int c = clk_get_rate(timer_clk);
- if (timrot_is_v1()) {
- clocksource_mxs.read = timrotv1_get_cycles;
- clocksource_mxs.mask = CLOCKSOURCE_MASK(16);
- }
-
- clocksource_register_hz(&clocksource_mxs, c);
+ if (timrot_is_v1())
+ clocksource_register_hz(&clocksource_mxs, c);
+ else
+ clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
+ "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
return 0;
}
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index f12f22d..e24c141 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -104,19 +104,6 @@
.handler = netx_timer_interrupt,
};
-cycle_t netx_get_cycles(struct clocksource *cs)
-{
- return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
-}
-
-static struct clocksource clocksource_netx = {
- .name = "netx_timer",
- .rating = 200,
- .read = netx_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
/*
* Set up timer interrupt
*/
@@ -150,7 +137,8 @@
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
- clocksource_register_hz(&clocksource_netx, CLOCK_TICK_RATE);
+ clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
+ "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
netx_clockevent.shift);
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index acd1616..1749cb3 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -13,7 +13,7 @@
#include <plat/tc.h>
#include <plat/flash.h>
-void omap1_set_vpp(struct map_info *map, int enable)
+void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;
u32 l;
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 6588c22..fe31d93 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -24,75 +24,50 @@
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
{
- struct clk *iclk, *fclk;
- int ret = 0;
+ int ret;
dev_dbg(dev, "%s\n", __func__);
ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
- fclk = clk_get(dev, "fck");
- if (!IS_ERR(fclk)) {
- clk_disable(fclk);
- clk_put(fclk);
- }
-
- iclk = clk_get(dev, "ick");
- if (!IS_ERR(iclk)) {
- clk_disable(iclk);
- clk_put(iclk);
+ ret = pm_runtime_clk_suspend(dev);
+ if (ret) {
+ pm_generic_runtime_resume(dev);
+ return ret;
}
return 0;
-};
+}
static int omap1_pm_runtime_resume(struct device *dev)
{
- struct clk *iclk, *fclk;
-
dev_dbg(dev, "%s\n", __func__);
- iclk = clk_get(dev, "ick");
- if (!IS_ERR(iclk)) {
- clk_enable(iclk);
- clk_put(iclk);
- }
-
- fclk = clk_get(dev, "fck");
- if (!IS_ERR(fclk)) {
- clk_enable(fclk);
- clk_put(fclk);
- }
-
+ pm_runtime_clk_resume(dev);
return pm_generic_runtime_resume(dev);
+}
+
+static struct dev_power_domain default_power_domain = {
+ .ops = {
+ .runtime_suspend = omap1_pm_runtime_suspend,
+ .runtime_resume = omap1_pm_runtime_resume,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
+
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pwr_domain = &default_power_domain,
+ .con_ids = { "ick", "fck", NULL, },
};
static int __init omap1_pm_runtime_init(void)
{
- const struct dev_pm_ops *pm;
- struct dev_pm_ops *omap_pm;
-
if (!cpu_class_is_omap1())
return -ENODEV;
- pm = platform_bus_get_pm_ops();
- if (!pm) {
- pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
- __func__);
- return -ENODEV;
- }
-
- omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
- if (!omap_pm) {
- pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
- __func__);
- return -ENOMEM;
- }
-
- omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
- omap_pm->runtime_resume = omap1_pm_runtime_resume;
-
- platform_bus_set_pm_ops(omap_pm);
+ pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 6885d2f..03e1e10 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -68,49 +68,50 @@
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
-((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
+((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long notrace omap_mpu_timer_read(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- return timer->read_tim;
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+ return readl(&timer->read_tim);
}
static inline void omap_mpu_set_autoreset(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl = timer->cntl | MPU_TIMER_AR;
+ writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_remove_autoreset(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+ writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
int autoreset)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+ unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
- if (autoreset) timerflags |= MPU_TIMER_AR;
+ if (autoreset)
+ timerflags |= MPU_TIMER_AR;
- timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+ writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
udelay(1);
- timer->load_tim = load_val;
+ writel(load_val, &timer->load_tim);
udelay(1);
- timer->cntl = timerflags;
+ writel(timerflags, &timer->cntl);
}
static inline void omap_mpu_timer_stop(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl &= ~MPU_TIMER_ST;
+ writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
}
/*
@@ -189,38 +190,11 @@
* ---------------------------------------------------------------------------
*/
-static unsigned long omap_mpu_timer2_overflows;
-
-static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id)
-{
- omap_mpu_timer2_overflows++;
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap_mpu_timer2_irq = {
- .name = "mpu_timer2",
- .flags = IRQF_DISABLED,
- .handler = omap_mpu_timer2_interrupt,
-};
-
-static cycle_t mpu_read(struct clocksource *cs)
-{
- return ~omap_mpu_timer_read(1);
-}
-
-static struct clocksource clocksource_mpu = {
- .name = "mpu_timer2",
- .rating = 300,
- .read = mpu_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static DEFINE_CLOCK_DATA(cd);
static inline unsigned long long notrace _omap_mpu_sched_clock(void)
{
- u32 cyc = mpu_read(&clocksource_mpu);
+ u32 cyc = ~omap_mpu_timer_read(1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -238,21 +212,22 @@
static void notrace mpu_update_sched_clock(void)
{
- u32 cyc = mpu_read(&clocksource_mpu);
+ u32 cyc = ~omap_mpu_timer_read(1);
update_sched_clock(&cd, cyc, (u32)~0);
}
static void __init omap_init_clocksource(unsigned long rate)
{
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
- setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
omap_mpu_timer_start(1, ~0, 1);
init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
- if (clocksource_register_hz(&clocksource_mpu, rate))
- printk(err, clocksource_mpu.name);
+ if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
+ 300, 32, clocksource_mmio_readl_down))
+ printk(err, "mpu_timer2");
}
static void __init omap_mpu_timer_init(void)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 512b152..66dfbcc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -59,10 +59,10 @@
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
- cpuidle34xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
+ cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index b2b1e37..d6e34dd 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -115,6 +115,7 @@
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
+ clk->rate = rate;
return 0;
}
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
index de441c0..e4bd87619 100644
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -33,4 +33,11 @@
extern void __init gic_init_irq(void);
extern void omap_smc1(u32 fn, u32 arg);
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
#endif
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index b66cfe8..ecfe93c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
@@ -63,7 +64,7 @@
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
/*
* Now the secondary core is starting up let it run its
@@ -118,6 +119,8 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c
deleted file mode 100644
index 5acd2ab..0000000
--- a/arch/arm/mach-omap2/pm_bus.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Runtime PM support code for OMAP
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#ifdef CONFIG_PM_RUNTIME
-static int omap_pm_runtime_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int r, ret = 0;
-
- dev_dbg(dev, "%s\n", __func__);
-
- ret = pm_generic_runtime_suspend(dev);
-
- if (!ret && dev->parent == &omap_device_parent) {
- r = omap_device_idle(pdev);
- WARN_ON(r);
- }
-
- return ret;
-};
-
-static int omap_pm_runtime_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int r;
-
- dev_dbg(dev, "%s\n", __func__);
-
- if (dev->parent == &omap_device_parent) {
- r = omap_device_enable(pdev);
- WARN_ON(r);
- }
-
- return pm_generic_runtime_resume(dev);
-};
-#else
-#define omap_pm_runtime_suspend NULL
-#define omap_pm_runtime_resume NULL
-#endif /* CONFIG_PM_RUNTIME */
-
-static int __init omap_pm_runtime_init(void)
-{
- const struct dev_pm_ops *pm;
- struct dev_pm_ops *omap_pm;
-
- pm = platform_bus_get_pm_ops();
- if (!pm) {
- pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
- __func__);
- return -ENODEV;
- }
-
- omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
- if (!omap_pm) {
- pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
- __func__);
- return -ENOMEM;
- }
-
- omap_pm->runtime_suspend = omap_pm_runtime_suspend;
- omap_pm->runtime_resume = omap_pm_runtime_resume;
-
- platform_bus_set_pm_ops(omap_pm);
-
- return 0;
-}
-core_initcall(omap_pm_runtime_init);
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index bfbecec..810a982 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
index 1ce0904..1d5859d 100644
--- a/arch/arm/mach-pxa/clock-pxa2xx.c
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -9,7 +9,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/pxa2xx-regs.h>
@@ -33,32 +33,22 @@
#ifdef CONFIG_PM
static uint32_t saved_cken;
-static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+static int pxa2xx_clock_suspend(void)
{
saved_cken = CKEN;
return 0;
}
-static int pxa2xx_clock_resume(struct sys_device *d)
+static void pxa2xx_clock_resume(void)
{
CKEN = saved_cken;
- return 0;
}
#else
#define pxa2xx_clock_suspend NULL
#define pxa2xx_clock_resume NULL
#endif
-struct sysdev_class pxa2xx_clock_sysclass = {
- .name = "pxa2xx-clock",
+struct syscore_ops pxa2xx_clock_syscore_ops = {
.suspend = pxa2xx_clock_suspend,
.resume = pxa2xx_clock_resume,
};
-
-static int __init pxa2xx_clock_init(void)
-{
- if (cpu_is_pxa2xx())
- return sysdev_class_register(&pxa2xx_clock_sysclass);
- return 0;
-}
-postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index 3f864cd..2a37a9a 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
@@ -182,7 +183,7 @@
static uint32_t cken[2];
static uint32_t accr;
-static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+static int pxa3xx_clock_suspend(void)
{
cken[0] = CKENA;
cken[1] = CKENB;
@@ -190,28 +191,18 @@
return 0;
}
-static int pxa3xx_clock_resume(struct sys_device *d)
+static void pxa3xx_clock_resume(void)
{
ACCR = accr;
CKENA = cken[0];
CKENB = cken[1];
- return 0;
}
#else
#define pxa3xx_clock_suspend NULL
#define pxa3xx_clock_resume NULL
#endif
-struct sysdev_class pxa3xx_clock_sysclass = {
- .name = "pxa3xx-clock",
+struct syscore_ops pxa3xx_clock_syscore_ops = {
.suspend = pxa3xx_clock_suspend,
.resume = pxa3xx_clock_resume,
};
-
-static int __init pxa3xx_clock_init(void)
-{
- if (cpu_is_pxa3xx() || cpu_is_pxa95x())
- return sysdev_class_register(&pxa3xx_clock_sysclass);
- return 0;
-}
-postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index f9f349a..1f2fb9c 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,5 +1,5 @@
#include <linux/clkdev.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
struct clkops {
void (*enable)(struct clk *);
@@ -54,7 +54,7 @@
void clk_pxa2xx_cken_enable(struct clk *clk);
void clk_pxa2xx_cken_disable(struct clk *clk);
-extern struct sysdev_class pxa2xx_clock_sysclass;
+extern struct syscore_ops pxa2xx_clock_syscore_ops;
#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
@@ -74,5 +74,6 @@
extern void clk_pxa3xx_cken_enable(struct clk *);
extern void clk_pxa3xx_cken_disable(struct clk *);
-extern struct sysdev_class pxa3xx_clock_sysclass;
+extern struct syscore_ops pxa3xx_clock_syscore_ops;
+
#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index b88d601a..13518a7 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -10,7 +10,6 @@
*/
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 8b1a309..1afc0fb 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -29,33 +29,6 @@
unsigned long it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
-/*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
- unsigned long *zhole_size)
-{
- unsigned int sz = SZ_64M >> PAGE_SHIFT;
-
- if (machine_is_armcore()) {
- pr_info("Adjusting zones for CM-X2XX\n");
-
- /*
- * Only adjust if > 64M on current system
- */
- if (zone_size[0] <= sz)
- return;
-
- zone_size[1] = zone_size[0] - sz;
- zone_size[0] = sz;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
- }
-}
-
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 8225e2e..a109967 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -10,7 +10,7 @@
*/
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -388,7 +388,7 @@
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
-static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+static int cmx2xx_suspend(void)
{
cmx2xx_pci_suspend();
@@ -412,7 +412,7 @@
return 0;
}
-static int cmx2xx_resume(struct sys_device *dev)
+static void cmx2xx_resume(void)
{
cmx2xx_pci_resume();
@@ -420,27 +420,18 @@
__raw_writel(sleep_save_msc[0], MSC0);
__raw_writel(sleep_save_msc[1], MSC1);
__raw_writel(sleep_save_msc[2], MSC2);
-
- return 0;
}
-static struct sysdev_class cmx2xx_pm_sysclass = {
- .name = "pm",
+static struct syscore_ops cmx2xx_pm_syscore_ops = {
.resume = cmx2xx_resume,
.suspend = cmx2xx_suspend,
};
-static struct sys_device cmx2xx_pm_device = {
- .cls = &cmx2xx_pm_sysclass,
-};
-
static int __init cmx2xx_pm_init(void)
{
- int error;
- error = sysdev_class_register(&cmx2xx_pm_sysclass);
- if (error == 0)
- error = sysdev_register(&cmx2xx_pm_device);
- return error;
+ register_syscore_ops(&cmx2xx_pm_syscore_ops);
+
+ return 0;
}
#else
static int __init cmx2xx_pm_init(void) { return 0; }
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 81c3c43..d28e802 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 44c1b77..80538b8 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/sysdev.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 6fc5d32..7545a48 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -17,7 +17,6 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/ucb1400.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index a079d8b..e6c9344 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -61,10 +61,10 @@
#define pxa3xx_get_clk_frequency_khz(x) (0)
#endif
-extern struct sysdev_class pxa_irq_sysclass;
-extern struct sysdev_class pxa_gpio_sysclass;
-extern struct sysdev_class pxa2xx_mfp_sysclass;
-extern struct sysdev_class pxa3xx_mfp_sysclass;
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa_gpio_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
void __init pxa_set_ffuart_info(void *info);
void __init pxa_set_btuart_info(void *info);
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6de0ad0..f941a49 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -711,7 +711,7 @@
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,
@@ -735,7 +735,7 @@
* StrataFlash
*/
-static void hx4700_set_vpp(struct map_info *map, int vpp)
+static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
}
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 7f68724..07734f3 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,14 +17,8 @@
*/
#define PLAT_PHYS_OFFSET UL(0xa0000000)
-#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(size, holes) \
- cmx2xx_pci_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define ARM_DMA_ZONE_SIZE SZ_64M
#endif
#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6251e3f..32ed551 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -183,7 +183,7 @@
static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
-static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa_irq_suspend(void)
{
int i;
@@ -202,7 +202,7 @@
return 0;
}
-static int pxa_irq_resume(struct sys_device *dev)
+static void pxa_irq_resume(void)
{
int i;
@@ -218,22 +218,13 @@
__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
__raw_writel(1, IRQ_BASE + ICCR);
- return 0;
}
#else
#define pxa_irq_suspend NULL
#define pxa_irq_resume NULL
#endif
-struct sysdev_class pxa_irq_sysclass = {
- .name = "irq",
+struct syscore_ops pxa_irq_syscore_ops = {
.suspend = pxa_irq_suspend,
.resume = pxa_irq_resume,
};
-
-static int __init pxa_irq_init(void)
-{
- return sysdev_class_register(&pxa_irq_sysclass);
-}
-
-core_initcall(pxa_irq_init);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index f5de541..6cf8180 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -159,30 +159,22 @@
#ifdef CONFIG_PM
-static int lpd270_irq_resume(struct sys_device *dev)
+static void lpd270_irq_resume(void)
{
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
- return 0;
}
-static struct sysdev_class lpd270_irq_sysclass = {
- .name = "cpld_irq",
+static struct syscore_ops lpd270_irq_syscore_ops = {
.resume = lpd270_irq_resume,
};
-static struct sys_device lpd270_irq_device = {
- .cls = &lpd270_irq_sysclass,
-};
-
static int __init lpd270_irq_device_init(void)
{
- int ret = -ENODEV;
if (machine_is_logicpd_pxa270()) {
- ret = sysdev_class_register(&lpd270_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lpd270_irq_device);
+ register_syscore_ops(&lpd270_irq_syscore_ops);
+ return 0;
}
- return ret;
+ return -ENODEV;
}
device_initcall(lpd270_irq_device_init);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 3ede978..e10ddb8 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/major.h>
#include <linux/fb.h>
#include <linux/interrupt.h>
@@ -176,31 +176,22 @@
#ifdef CONFIG_PM
-static int lubbock_irq_resume(struct sys_device *dev)
+static void lubbock_irq_resume(void)
{
LUB_IRQ_MASK_EN = lubbock_irq_enabled;
- return 0;
}
-static struct sysdev_class lubbock_irq_sysclass = {
- .name = "cpld_irq",
+static struct syscore_ops lubbock_irq_syscore_ops = {
.resume = lubbock_irq_resume,
};
-static struct sys_device lubbock_irq_device = {
- .cls = &lubbock_irq_sysclass,
-};
-
static int __init lubbock_irq_device_init(void)
{
- int ret = -ENODEV;
-
if (machine_is_lubbock()) {
- ret = sysdev_class_register(&lubbock_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lubbock_irq_device);
+ register_syscore_ops(&lubbock_irq_syscore_ops);
+ return 0;
}
- return ret;
+ return -ENODEV;
}
device_initcall(lubbock_irq_device_init);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index a72993d..e192057 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -599,7 +599,7 @@
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,
@@ -662,7 +662,7 @@
* StrataFlash
*/
-static void magician_set_vpp(struct map_info *map, int vpp)
+static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 95163ba..3479e2b 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -185,31 +185,21 @@
#ifdef CONFIG_PM
-static int mainstone_irq_resume(struct sys_device *dev)
+static void mainstone_irq_resume(void)
{
MST_INTMSKENA = mainstone_irq_enabled;
- return 0;
}
-static struct sysdev_class mainstone_irq_sysclass = {
- .name = "cpld_irq",
+static struct syscore_ops mainstone_irq_syscore_ops = {
.resume = mainstone_irq_resume,
};
-static struct sys_device mainstone_irq_device = {
- .cls = &mainstone_irq_sysclass,
-};
-
static int __init mainstone_irq_device_init(void)
{
- int ret = -ENODEV;
+ if (machine_is_mainstone())
+ register_syscore_ops(&mainstone_irq_syscore_ops);
- if (machine_is_mainstone()) {
- ret = sysdev_class_register(&mainstone_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&mainstone_irq_device);
- }
- return ret;
+ return 0;
}
device_initcall(mainstone_irq_device_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 1d1419b..87ae312 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -16,7 +16,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
@@ -338,7 +338,7 @@
static unsigned long saved_gpdr[4];
static unsigned long saved_pgsr[4];
-static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+static int pxa2xx_mfp_suspend(void)
{
int i;
@@ -365,7 +365,7 @@
return 0;
}
-static int pxa2xx_mfp_resume(struct sys_device *d)
+static void pxa2xx_mfp_resume(void)
{
int i;
@@ -376,15 +376,13 @@
PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
- return 0;
}
#else
#define pxa2xx_mfp_suspend NULL
#define pxa2xx_mfp_resume NULL
#endif
-struct sysdev_class pxa2xx_mfp_sysclass = {
- .name = "mfp",
+struct syscore_ops pxa2xx_mfp_syscore_ops = {
.suspend = pxa2xx_mfp_suspend,
.resume = pxa2xx_mfp_resume,
};
@@ -409,6 +407,6 @@
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
- return sysdev_class_register(&pxa2xx_mfp_sysclass);
+ return 0;
}
postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 7a270ee..89863a0 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -17,7 +17,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/mfp-pxa3xx.h>
@@ -31,13 +31,13 @@
* a pull-down mode if they're an active low chip select, and we're
* just entering standby.
*/
-static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+static int pxa3xx_mfp_suspend(void)
{
mfp_config_lpm();
return 0;
}
-static int pxa3xx_mfp_resume(struct sys_device *d)
+static void pxa3xx_mfp_resume(void)
{
mfp_config_run();
@@ -47,24 +47,13 @@
* preserve them here in case they will be referenced later
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
- return 0;
}
#else
#define pxa3xx_mfp_suspend NULL
#define pxa3xx_mfp_resume NULL
#endif
-struct sysdev_class pxa3xx_mfp_sysclass = {
- .name = "mfp",
+struct syscore_ops pxa3xx_mfp_syscore_ops = {
.suspend = pxa3xx_mfp_suspend,
- .resume = pxa3xx_mfp_resume,
+ .resume = pxa3xx_mfp_resume,
};
-
-static int __init mfp_init_devicefs(void)
-{
- if (cpu_is_pxa3xx())
- return sysdev_class_register(&pxa3xx_mfp_sysclass);
-
- return 0;
-}
-postcore_initcall(mfp_init_devicefs);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 23925db..e347013 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -22,7 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
@@ -488,7 +488,7 @@
}
-static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+static int mioa701_sys_suspend(void)
{
int i = 0, is_bt_on;
u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
@@ -514,7 +514,7 @@
return 0;
}
-static int mioa701_sys_resume(struct sys_device *sysdev)
+static void mioa701_sys_resume(void)
{
int i = 0;
u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
@@ -527,43 +527,18 @@
*mem_resume_enabler = save_buffer[i++];
*mem_resume_bt = save_buffer[i++];
*mem_resume_unknown = save_buffer[i++];
-
- return 0;
}
-static struct sysdev_class mioa701_sysclass = {
- .name = "mioa701",
-};
-
-static struct sys_device sysdev_bootstrap = {
- .cls = &mioa701_sysclass,
-};
-
-static struct sysdev_driver driver_bootstrap = {
- .suspend = &mioa701_sys_suspend,
- .resume = &mioa701_sys_resume,
+static struct syscore_ops mioa701_syscore_ops = {
+ .suspend = mioa701_sys_suspend,
+ .resume = mioa701_sys_resume,
};
static int __init bootstrap_init(void)
{
- int rc;
int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
- rc = sysdev_class_register(&mioa701_sysclass);
- if (rc) {
- printk(KERN_ERR "Failed registering mioa701 sys class\n");
- return -ENODEV;
- }
- rc = sysdev_register(&sysdev_bootstrap);
- if (rc) {
- printk(KERN_ERR "Failed registering mioa701 sys device\n");
- return -ENODEV;
- }
- rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
- if (rc) {
- printk(KERN_ERR "Failed registering PMU sys driver\n");
- return -ENODEV;
- }
+ register_syscore_ops(&mioa701_syscore_ops);
save_buffer = kmalloc(save_size, GFP_KERNEL);
if (!save_buffer)
@@ -576,9 +551,7 @@
static void bootstrap_exit(void)
{
kfree(save_buffer);
- sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
- sysdev_unregister(&sysdev_bootstrap);
- sysdev_class_unregister(&mioa701_sysclass);
+ unregister_syscore_ops(&mioa701_syscore_ops);
printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
"resume !!!\n");
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index a6f898c..4061ecd 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -24,7 +24,6 @@
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/sysdev.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 8aadad5..20d1b18 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -25,7 +25,6 @@
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/power_supply.h>
-#include <linux/sysdev.h>
#include <linux/w1-gpio.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3b8a4f3..65f24f0 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -19,7 +19,7 @@
*/
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
@@ -233,9 +233,9 @@
static unsigned long store_ptr;
-/* sys_device for Palm Zire 72 PM */
+/* syscore_ops for Palm Zire 72 PM */
-static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+static int palmz72_pm_suspend(void)
{
/* setup the resume_info struct for the original bootloader */
palmz72_resume_info.resume_addr = (u32) cpu_resume;
@@ -249,31 +249,23 @@
return 0;
}
-static int palmz72_pm_resume(struct sys_device *dev)
+static void palmz72_pm_resume(void)
{
*PALMZ72_SAVE_DWORD = store_ptr;
- return 0;
}
-static struct sysdev_class palmz72_pm_sysclass = {
- .name = "palmz72_pm",
+static struct syscore_ops palmz72_pm_syscore_ops = {
.suspend = palmz72_pm_suspend,
.resume = palmz72_pm_resume,
};
-static struct sys_device palmz72_pm_device = {
- .cls = &palmz72_pm_sysclass,
-};
-
static int __init palmz72_pm_init(void)
{
- int ret = -ENODEV;
if (machine_is_palmz72()) {
- ret = sysdev_class_register(&palmz72_pm_sysclass);
- if (ret == 0)
- ret = sysdev_register(&palmz72_pm_device);
+ register_syscore_ops(&palmz72_pm_syscore_ops);
+ return 0;
}
- return ret;
+ return -ENODEV;
}
device_initcall(palmz72_pm_init);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index a4af8c5..fed363c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/suspend.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <asm/mach/map.h>
@@ -350,21 +350,9 @@
&pxa_device_asoc_platform,
};
-static struct sys_device pxa25x_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa2xx_mfp_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa2xx_clock_sysclass,
- }
-};
-
static int __init pxa25x_init(void)
{
- int i, ret = 0;
+ int ret = 0;
if (cpu_is_pxa25x()) {
@@ -377,11 +365,10 @@
pxa25x_init_pm();
- for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) {
- ret = sysdev_register(&pxa25x_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 909756e..2fecbec 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
@@ -428,21 +428,9 @@
&pxa27x_device_pwm1,
};
-static struct sys_device pxa27x_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa2xx_mfp_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa2xx_clock_sysclass,
- }
-};
-
static int __init pxa27x_init(void)
{
- int i, ret = 0;
+ int ret = 0;
if (cpu_is_pxa27x()) {
@@ -455,11 +443,10 @@
pxa27x_init_pm();
- for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
- ret = sysdev_register(&pxa27x_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 8dd1073..8521d7d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -20,7 +20,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach/map.h>
@@ -427,21 +427,9 @@
&pxa27x_device_pwm1,
};
-static struct sys_device pxa3xx_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa3xx_mfp_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa3xx_clock_sysclass,
- }
-};
-
static int __init pxa3xx_init(void)
{
- int i, ret = 0;
+ int ret = 0;
if (cpu_is_pxa3xx()) {
@@ -462,11 +450,10 @@
pxa3xx_init_pm();
- for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) {
- ret = sysdev_register(&pxa3xx_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa3xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 23b229b..ecc82a3 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -18,7 +18,7 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -260,16 +260,6 @@
&pxa27x_device_pwm1,
};
-static struct sys_device pxa95x_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa3xx_clock_sysclass,
- }
-};
-
static int __init pxa95x_init(void)
{
int ret = 0, i;
@@ -293,11 +283,9 @@
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
- for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
- ret = sysdev_register(&pxa95x_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index cd18613..d130f77 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 232b731..7992305 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -6,7 +6,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/smemc.h>
@@ -16,7 +16,7 @@
static unsigned long sxcnfg, memclkcfg;
static unsigned long csadrcfg[4];
-static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa3xx_smemc_suspend(void)
{
msc[0] = __raw_readl(MSC0);
msc[1] = __raw_readl(MSC1);
@@ -30,7 +30,7 @@
return 0;
}
-static int pxa3xx_smemc_resume(struct sys_device *dev)
+static void pxa3xx_smemc_resume(void)
{
__raw_writel(msc[0], MSC0);
__raw_writel(msc[1], MSC1);
@@ -40,34 +40,19 @@
__raw_writel(csadrcfg[1], CSADRCFG1);
__raw_writel(csadrcfg[2], CSADRCFG2);
__raw_writel(csadrcfg[3], CSADRCFG3);
-
- return 0;
}
-static struct sysdev_class smemc_sysclass = {
- .name = "smemc",
+static struct syscore_ops smemc_syscore_ops = {
.suspend = pxa3xx_smemc_suspend,
.resume = pxa3xx_smemc_resume,
};
-static struct sys_device smemc_sysdev = {
- .id = 0,
- .cls = &smemc_sysclass,
-};
-
static int __init smemc_init(void)
{
- int ret = 0;
+ if (cpu_is_pxa3xx())
+ register_syscore_ops(&smemc_syscore_ops);
- if (cpu_is_pxa3xx()) {
- ret = sysdev_class_register(&smemc_sysclass);
- if (ret)
- return ret;
-
- ret = sysdev_register(&smemc_sysdev);
- }
-
- return ret;
+ return 0;
}
subsys_initcall(smemc_init);
#endif
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 428da3f..de68470 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -105,19 +105,6 @@
.set_mode = pxa_osmr0_set_mode,
};
-static cycle_t pxa_read_oscr(struct clocksource *cs)
-{
- return OSCR;
-}
-
-static struct clocksource cksrc_pxa_oscr0 = {
- .name = "oscr0",
- .rating = 200,
- .read = pxa_read_oscr,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static struct irqaction pxa_ost0_irq = {
.name = "ost0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
@@ -134,7 +121,6 @@
init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
- clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
@@ -144,7 +130,8 @@
setup_irq(IRQ_OST0, &pxa_ost0_irq);
- clocksource_register_hz(&cksrc_pxa_oscr0, clock_tick_rate);
+ clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32,
+ clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_pxa_osmr0);
}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index b9cfbeb..687417a 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index b523f11..903218e 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -44,6 +44,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/syscore_ops.h>
#include <mach/pxa25x.h>
#include <mach/audio.h>
@@ -130,20 +131,19 @@
return v1;
}
-/* CPU sysdev */
-static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+/* CPU system core operations. */
+static int viper_cpu_suspend(void)
{
viper_icr_set_bit(VIPER_ICR_R_DIS);
return 0;
}
-static int viper_cpu_resume(struct sys_device *sysdev)
+static void viper_cpu_resume(void)
{
viper_icr_clear_bit(VIPER_ICR_R_DIS);
- return 0;
}
-static struct sysdev_driver viper_cpu_sysdev_driver = {
+static struct syscore_ops viper_cpu_syscore_ops = {
.suspend = viper_cpu_suspend,
.resume = viper_cpu_resume,
};
@@ -945,7 +945,7 @@
viper_init_vcore_gpios();
viper_init_cpufreq();
- sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+ register_syscore_ops(&viper_cpu_syscore_ops);
if (version) {
pr_info("viper: hardware v%di%d detected. "
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f71d377..67bd414 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -16,7 +16,6 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 75dbc87..5c23450 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -31,6 +31,7 @@
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <mach/hardware.h>
@@ -41,7 +42,6 @@
#include <asm/hardware/icst.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
@@ -56,48 +56,9 @@
#include "core.h"
-#ifdef CONFIG_ZONE_DMA
-/*
- * Adjust the zones if there are restrictions for DMA access.
- */
-void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
-{
- unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
-
- if (!machine_is_realview_pbx() || size[0] <= dma_size)
- return;
-
- size[ZONE_NORMAL] = size[0] - dma_size;
- size[ZONE_DMA] = dma_size;
- hole[ZONE_NORMAL] = hole[0];
- hole[ZONE_DMA] = 0;
-}
-#endif
-
-
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-static int realview_flash_init(void)
-{
- u32 val;
-
- val = __raw_readl(REALVIEW_FLASHCTRL);
- val &= ~REALVIEW_FLASHPROG_FLVPPEN;
- __raw_writel(val, REALVIEW_FLASHCTRL);
-
- return 0;
-}
-
-static void realview_flash_exit(void)
-{
- u32 val;
-
- val = __raw_readl(REALVIEW_FLASHCTRL);
- val &= ~REALVIEW_FLASHPROG_FLVPPEN;
- __raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static void realview_flash_set_vpp(int on)
+static void realview_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
@@ -109,16 +70,13 @@
__raw_writel(val, REALVIEW_FLASHCTRL);
}
-static struct flash_platform_data realview_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data realview_flash_data = {
.width = 4,
- .init = realview_flash_init,
- .exit = realview_flash_exit,
.set_vpp = realview_flash_set_vpp,
};
struct platform_device realview_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
@@ -315,6 +273,10 @@
.rate = 24000000,
};
+static struct clk sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup lookups[] = {
@@ -357,7 +319,10 @@
}, { /* SSP */
.dev_id = "dev:ssp0",
.clk = &ref24_clk,
- }
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .clk = &sp804_clk,
+ },
};
void __init realview_init_early(void)
@@ -545,8 +510,8 @@
writel(0, timer2_va_base + TIMER_CTRL);
writel(0, timer3_va_base + TIMER_CTRL);
- sp804_clocksource_init(timer3_va_base);
- sp804_clockevents_init(timer0_va_base, timer_irq);
+ sp804_clocksource_init(timer3_va_base, "timer3");
+ sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
}
/*
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
index 0c5d749..9a73219 100644
--- a/arch/arm/mach-realview/include/mach/barriers.h
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -4,5 +4,5 @@
* operation to deadlock the system.
*/
#define mb() dsb()
-#define rmb() dmb()
+#define rmb() dsb()
#define wmb() mb()
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index e05fc2c..1759fa6 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -29,13 +29,8 @@
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
-#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
-extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
-#define arch_adjust_zones(size, hole) \
- realview_adjust_zones(size, hole)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
+#ifdef CONFIG_ZONE_DMA
+#define ARM_DMA_ZONE_SIZE SZ_256M
#endif
#ifdef CONFIG_SPARSEMEM
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
deleted file mode 100644
index c8221b3..0000000
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 2391922..963bf0d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
@@ -61,6 +62,8 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 5e2f353..2854129 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -23,38 +23,12 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
- return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
- .add = s3c2410_irq_add,
+struct syscore_ops s3c24xx_irq_syscore_ops = {
.suspend = s3c24xx_irq_suspend,
.resume = s3c24xx_irq_resume,
};
-
-static int __init s3c2410_irq_init(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
-
-static struct sysdev_driver s3c2410a_irq_driver = {
- .add = s3c2410_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
-
-static int __init s3c2410a_irq_init(void)
-{
- return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
-}
-
-arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 2970ea9..1e2d536 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -17,7 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
@@ -214,17 +214,16 @@
/* NAND Flash on BAST board */
#ifdef CONFIG_PM
-static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int bast_pm_suspend(void)
{
/* ensure that an nRESET is not generated on resume. */
gpio_direction_output(S3C2410_GPA(21), 1);
return 0;
}
-static int bast_pm_resume(struct sys_device *sd)
+static void bast_pm_resume(void)
{
s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
- return 0;
}
#else
@@ -232,16 +231,11 @@
#define bast_pm_resume NULL
#endif
-static struct sysdev_class bast_pm_sysclass = {
- .name = "mach-bast",
+static struct syscore_ops bast_pm_syscore_ops = {
.suspend = bast_pm_suspend,
.resume = bast_pm_resume,
};
-static struct sys_device bast_pm_sysdev = {
- .cls = &bast_pm_sysclass,
-};
-
static int smartmedia_map[] = { 0 };
static int chip0_map[] = { 1 };
static int chip1_map[] = { 2 };
@@ -642,8 +636,7 @@
static void __init bast_init(void)
{
- sysdev_class_register(&bast_pm_sysclass);
- sysdev_register(&bast_pm_sysdev);
+ register_syscore_ops(&bast_pm_syscore_ops);
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c_nand_set_platdata(&bast_nand_info);
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index 598d130..ad9f750 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -32,7 +32,7 @@
#include "nor-simtec.h"
-static void simtec_nor_vpp(struct map_info *map, int vpp)
+static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
{
unsigned int val;
unsigned long flags;
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 725636f..4728f9a 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -92,7 +93,7 @@
}
}
-static int s3c2410_pm_resume(struct sys_device *dev)
+static void s3c2410_pm_resume(void)
{
unsigned long tmp;
@@ -104,10 +105,12 @@
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-
- return 0;
}
+struct syscore_ops s3c2410_pm_syscore_ops = {
+ .resume = s3c2410_pm_resume,
+};
+
static int s3c2410_pm_add(struct sys_device *dev)
{
pm_cpu_prep = s3c2410_pm_prepare;
@@ -119,7 +122,6 @@
#if defined(CONFIG_CPU_S3C2410)
static struct sysdev_driver s3c2410_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
/* register ourselves */
@@ -133,7 +135,6 @@
static struct sysdev_driver s3c2410a_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
static int __init s3c2410a_pm_drvinit(void)
@@ -147,7 +148,6 @@
#if defined(CONFIG_CPU_S3C2440)
static struct sysdev_driver s3c2440_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
static int __init s3c2440_pm_drvinit(void)
@@ -161,7 +161,6 @@
#if defined(CONFIG_CPU_S3C2442)
static struct sysdev_driver s3c2442_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
static int __init s3c2442_pm_drvinit(void)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index adc90a3..f1d3bd8 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -40,6 +41,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pll.h>
+#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -168,6 +170,9 @@
{
printk("S3C2410: Initialising architecture\n");
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2410_sysdev);
}
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index f3355d2..1a1aa22 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -202,8 +202,6 @@
static struct sysdev_driver s3c2412_irq_driver = {
.add = s3c2412_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
static int s3c2412_irq_init(void)
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 923e01b..85dcaeb 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -17,7 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
@@ -486,7 +486,7 @@
/* Jive power management device */
#ifdef CONFIG_PM
-static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int jive_pm_suspend(void)
{
/* Write the magic value u-boot uses to check for resume into
* the INFORM0 register, and ensure INFORM1 is set to the
@@ -498,10 +498,9 @@
return 0;
}
-static int jive_pm_resume(struct sys_device *sd)
+static void jive_pm_resume(void)
{
__raw_writel(0x0, S3C2412_INFORM0);
- return 0;
}
#else
@@ -509,16 +508,11 @@
#define jive_pm_resume NULL
#endif
-static struct sysdev_class jive_pm_sysclass = {
- .name = "jive-pm",
+static struct syscore_ops jive_pm_syscore_ops = {
.suspend = jive_pm_suspend,
.resume = jive_pm_resume,
};
-static struct sys_device jive_pm_sysdev = {
- .cls = &jive_pm_sysclass,
-};
-
static void __init jive_map_io(void)
{
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
@@ -536,10 +530,9 @@
static void __init jive_machine_init(void)
{
- /* register system devices for managing low level suspend */
+ /* register system core operations for managing low level suspend */
- sysdev_class_register(&jive_pm_sysclass);
- sysdev_register(&jive_pm_sysdev);
+ register_syscore_ops(&jive_pm_syscore_ops);
/* write our sleep configurations for the IO. Pull down all unused
* IO, ensure that we have turned off all peripherals we do not
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index a7417c4..752b13a 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -86,13 +87,24 @@
SAVE_ITEM(S3C2413_GPJSLPCON),
};
-static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_driver s3c2412_pm_driver = {
+ .add = s3c2412_pm_add,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
+
+static int s3c2412_pm_suspend(void)
{
s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
return 0;
}
-static int s3c2412_pm_resume(struct sys_device *dev)
+static void s3c2412_pm_resume(void)
{
unsigned long tmp;
@@ -102,18 +114,9 @@
__raw_writel(tmp, S3C2412_PWRCFG);
s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
- return 0;
}
-static struct sysdev_driver s3c2412_pm_driver = {
- .add = s3c2412_pm_add,
+struct syscore_ops s3c2412_pm_syscore_ops = {
.suspend = s3c2412_pm_suspend,
.resume = s3c2412_pm_resume,
};
-
-static __init int s3c2412_pm_init(void)
-{
- return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
-}
-
-arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 4c6df51..ef0958d 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -244,5 +245,8 @@
{
printk("S3C2412: Initialising architecture\n");
+ register_syscore_ops(&s3c2412_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2412_sysdev);
}
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 77b38f2..28ad20d 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -236,8 +236,6 @@
static struct sysdev_driver s3c2416_irq_driver = {
.add = s3c2416_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
static int __init s3c2416_irq_init(void)
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 4a04205..41db2b2 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -11,6 +11,7 @@
*/
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
@@ -55,25 +56,8 @@
return 0;
}
-static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
-{
- return 0;
-}
-
-static int s3c2416_pm_resume(struct sys_device *dev)
-{
- /* unset the return-from-sleep amd inform flags */
- __raw_writel(0x0, S3C2443_PWRMODE);
- __raw_writel(0x0, S3C2412_INFORM0);
- __raw_writel(0x0, S3C2412_INFORM1);
-
- return 0;
-}
-
static struct sysdev_driver s3c2416_pm_driver = {
.add = s3c2416_pm_add,
- .suspend = s3c2416_pm_suspend,
- .resume = s3c2416_pm_resume,
};
static __init int s3c2416_pm_init(void)
@@ -82,3 +66,16 @@
}
arch_initcall(s3c2416_pm_init);
+
+
+static void s3c2416_pm_resume(void)
+{
+ /* unset the return-from-sleep amd inform flags */
+ __raw_writel(0x0, S3C2443_PWRMODE);
+ __raw_writel(0x0, S3C2412_INFORM0);
+ __raw_writel(0x0, S3C2412_INFORM1);
+}
+
+struct syscore_ops s3c2416_pm_syscore_ops = {
+ .resume = s3c2416_pm_resume,
+};
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index ba7fd87..494ce91 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -32,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -54,6 +55,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
+#include <plat/pm.h>
#include <plat/iic-core.h>
#include <plat/fb-core.h>
@@ -95,6 +97,9 @@
s3c_fb_setname("s3c2443-fb");
+ register_syscore_ops(&s3c2416_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2416_sysdev);
}
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 14dc678..d885363 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
#include <linux/i2c.h>
@@ -284,7 +284,7 @@
#ifdef CONFIG_PM
static unsigned char pm_osiris_ctrl0;
-static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int osiris_pm_suspend(void)
{
unsigned int tmp;
@@ -304,7 +304,7 @@
return 0;
}
-static int osiris_pm_resume(struct sys_device *sd)
+static void osiris_pm_resume(void)
{
if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
@@ -312,8 +312,6 @@
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-
- return 0;
}
#else
@@ -321,16 +319,11 @@
#define osiris_pm_resume NULL
#endif
-static struct sysdev_class osiris_pm_sysclass = {
- .name = "mach-osiris",
+static struct syscore_ops osiris_pm_syscore_ops = {
.suspend = osiris_pm_suspend,
.resume = osiris_pm_resume,
};
-static struct sys_device osiris_pm_sysdev = {
- .cls = &osiris_pm_sysclass,
-};
-
/* Link for DVS driver to TPS65011 */
static void osiris_tps_release(struct device *dev)
@@ -439,8 +432,7 @@
static void __init osiris_init(void)
{
- sysdev_class_register(&osiris_pm_sysclass);
- sysdev_register(&osiris_pm_sysdev);
+ register_syscore_ops(&osiris_pm_syscore_ops);
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&osiris_nand_info);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index f7663f7..ce99ff7 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -33,6 +34,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/s3c244x.h>
+#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -51,6 +53,12 @@
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+ /* register suspend/resume handlers */
+
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
/* register our system device for everything else */
return sysdev_register(&s3c2440_sysdev);
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index ecf8135..6224bad 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -29,6 +29,7 @@
#include <linux/err.h>
#include <linux/device.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
@@ -45,6 +46,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/s3c244x.h>
+#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -167,6 +169,10 @@
{
printk("S3C2442: Initialising architecture\n");
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2442_sysdev);
}
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index de07c2f..c63e8f2 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -116,8 +116,6 @@
static struct sysdev_driver s3c2440_irq_driver = {
.add = s3c244x_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
static int s3c2440_irq_init(void)
@@ -129,8 +127,6 @@
static struct sysdev_driver s3c2442_irq_driver = {
.add = s3c244x_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 90c1707..7e8a23d 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -19,6 +19,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -134,45 +135,14 @@
s3c2410_baseclk_add();
}
-#ifdef CONFIG_PM
-
-static struct sleep_save s3c244x_sleep[] = {
- SAVE_ITEM(S3C2440_DSC0),
- SAVE_ITEM(S3C2440_DSC1),
- SAVE_ITEM(S3C2440_GPJDAT),
- SAVE_ITEM(S3C2440_GPJCON),
- SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
-{
- s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-static int s3c244x_resume(struct sys_device *dev)
-{
- s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume NULL
-#endif
-
/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */
struct sysdev_class s3c2440_sysclass = {
.name = "s3c2440-core",
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume
};
struct sysdev_class s3c2442_sysclass = {
.name = "s3c2442-core",
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume
};
/* need to register class before we actually register the device, and
@@ -194,3 +164,33 @@
}
core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static void s3c244x_resume(void)
+{
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume NULL
+#endif
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume,
+};
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index da1bec6..8bec61e 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -13,7 +13,7 @@
*/
#include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
@@ -54,7 +54,7 @@
static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c64xx_irq_pm_suspend(void)
{
struct irq_grp_save *grp = eint_grp_save;
int i;
@@ -75,7 +75,7 @@
return 0;
}
-static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+static void s3c64xx_irq_pm_resume(void)
{
struct irq_grp_save *grp = eint_grp_save;
int i;
@@ -94,18 +94,18 @@
}
S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
- return 0;
}
-static struct sysdev_driver s3c64xx_irq_driver = {
+struct syscore_ops s3c64xx_irq_syscore_ops = {
.suspend = s3c64xx_irq_pm_suspend,
.resume = s3c64xx_irq_pm_resume,
};
-static int __init s3c64xx_irq_pm_init(void)
+static __init int s3c64xx_syscore_init(void)
{
- return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+ register_syscore_ops(&s3c64xx_irq_syscore_ops);
+
+ return 0;
}
-arch_initcall(s3c64xx_irq_pm_init);
-
+core_initcall(s3c64xx_syscore_init);
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 549d792..24febae 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <plat/cpu.h>
@@ -140,7 +141,17 @@
return 0;
}
-static int s5pv210_pm_resume(struct sys_device *dev)
+static struct sysdev_driver s5pv210_pm_driver = {
+ .add = s5pv210_pm_add,
+};
+
+static __init int s5pv210_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+}
+arch_initcall(s5pv210_pm_drvinit);
+
+static void s5pv210_pm_resume(void)
{
u32 tmp;
@@ -150,17 +161,15 @@
__raw_writel(tmp , S5P_OTHERS);
s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
-
- return 0;
}
-static struct sysdev_driver s5pv210_pm_driver = {
- .add = s5pv210_pm_add,
+static struct syscore_ops s5pv210_pm_syscore_ops = {
.resume = s5pv210_pm_resume,
};
-static __init int s5pv210_pm_drvinit(void)
+static __init int s5pv210_pm_syscore_init(void)
{
- return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+ register_syscore_ops(&s5pv210_pm_syscore_ops);
+ return 0;
}
-arch_initcall(s5pv210_pm_drvinit);
+arch_initcall(s5pv210_pm_syscore_init);
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index a44da6a..cff31ee 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -14,18 +14,8 @@
*/
#define PLAT_PHYS_OFFSET UL(0xc0000000)
-#ifndef __ASSEMBLY__
-
#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(size, holes) \
- sa1111_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M)
-
-#endif
+#define ARM_DMA_ZONE_SIZE SZ_1M
#endif
/*
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 423ddb3..dfbf824 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
@@ -234,7 +234,7 @@
unsigned int iccr;
} sa1100irq_state;
-static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
+static int sa1100irq_suspend(void)
{
struct sa1100irq_state *st = &sa1100irq_state;
@@ -264,7 +264,7 @@
return 0;
}
-static int sa1100irq_resume(struct sys_device *dev)
+static void sa1100irq_resume(void)
{
struct sa1100irq_state *st = &sa1100irq_state;
@@ -277,24 +277,17 @@
ICMR = st->icmr;
}
- return 0;
}
-static struct sysdev_class sa1100irq_sysclass = {
- .name = "sa11x0-irq",
+static struct syscore_ops sa1100irq_syscore_ops = {
.suspend = sa1100irq_suspend,
.resume = sa1100irq_resume,
};
-static struct sys_device sa1100irq_device = {
- .id = 0,
- .cls = &sa1100irq_sysclass,
-};
-
static int __init sa1100irq_init_devicefs(void)
{
- sysdev_class_register(&sa1100irq_sysclass);
- return sysdev_register(&sa1100irq_device);
+ register_syscore_ops(&sa1100irq_syscore_ops);
+ return 0;
}
device_initcall(sa1100irq_init_devicefs);
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index ae4f3d8..fa66024 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -92,25 +92,11 @@
static struct clock_event_device ckevt_sa1100_osmr0 = {
.name = "osmr0",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 200,
.set_next_event = sa1100_osmr0_set_next_event,
.set_mode = sa1100_osmr0_set_mode,
};
-static cycle_t sa1100_read_oscr(struct clocksource *s)
-{
- return OSCR;
-}
-
-static struct clocksource cksrc_sa1100_oscr = {
- .name = "oscr",
- .rating = 200,
- .read = sa1100_read_oscr,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static struct irqaction sa1100_timer_irq = {
.name = "ost0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
@@ -120,14 +106,13 @@
static void __init sa1100_timer_init(void)
{
- OIER = 0; /* disable any timer interrupts */
- OSSR = 0xf; /* clear status on all timers */
+ OIER = 0;
+ OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
3686400, SC_MULT, SC_SHIFT);
- ckevt_sa1100_osmr0.mult =
- div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift);
+ clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
ckevt_sa1100_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
ckevt_sa1100_osmr0.min_delta_ns =
@@ -136,7 +121,8 @@
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- clocksource_register_hz(&cksrc_sa1100_oscr, CLOCK_TICK_RATE);
+ clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+ clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_sa1100_osmr0);
}
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index 9afb170..4c0831f8 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -17,25 +17,7 @@
*/
#define PLAT_PHYS_OFFSET UL(0x08000000)
-#ifndef __ASSEMBLY__
-
-static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
-{
- /* Only the first 4 MB (=1024 Pages) are usable for DMA */
- /* See dev / -> .properties in OpenFirmware. */
- zone_size[1] = zone_size[0] - 1024;
- zone_size[0] = 1024;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
-}
-
-#define arch_adjust_zones(size, holes) \
- __arch_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M)
-
-#endif
+#define ARM_DMA_ZONE_SIZE SZ_4M
/*
* Cache flushing area
diff --git a/arch/arm/mach-shmobile/include/mach/smp.h b/arch/arm/mach-shmobile/include/mach/smp.h
deleted file mode 100644
index 50db94e..0000000
--- a/arch/arm/mach-shmobile/include/mach/smp.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __MACH_SMP_H
-#define __MACH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
-#if defined(CONFIG_ARM_GIC)
- gic_raise_softirq(mask, ipi);
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 65e879b..f3888fe 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/mach-types.h>
#include <mach/common.h>
@@ -57,6 +58,8 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
index 94912d3..2d1b67a 100644
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -18,152 +18,41 @@
#include <linux/clk.h>
#include <linux/sh_clk.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
#ifdef CONFIG_PM_RUNTIME
-#define BIT_ONCE 0
-#define BIT_ACTIVE 1
-#define BIT_CLK_ENABLED 2
-struct pm_runtime_data {
- unsigned long flags;
- struct clk *clk;
-};
-
-static void __devres_release(struct device *dev, void *res)
-{
- struct pm_runtime_data *prd = res;
-
- dev_dbg(dev, "__devres_release()\n");
-
- if (test_bit(BIT_CLK_ENABLED, &prd->flags))
- clk_disable(prd->clk);
-
- if (test_bit(BIT_ACTIVE, &prd->flags))
- clk_put(prd->clk);
-}
-
-static struct pm_runtime_data *__to_prd(struct device *dev)
-{
- return devres_find(dev, __devres_release, NULL, NULL);
-}
-
-static void platform_pm_runtime_init(struct device *dev,
- struct pm_runtime_data *prd)
-{
- if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
- prd->clk = clk_get(dev, NULL);
- if (!IS_ERR(prd->clk)) {
- set_bit(BIT_ACTIVE, &prd->flags);
- dev_info(dev, "clocks managed by runtime pm\n");
- }
- }
-}
-
-static void platform_pm_runtime_bug(struct device *dev,
- struct pm_runtime_data *prd)
-{
- if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
- dev_err(dev, "runtime pm suspend before resume\n");
-}
-
-int platform_pm_runtime_suspend(struct device *dev)
-{
- struct pm_runtime_data *prd = __to_prd(dev);
-
- dev_dbg(dev, "platform_pm_runtime_suspend()\n");
-
- platform_pm_runtime_bug(dev, prd);
-
- if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
- clk_disable(prd->clk);
- clear_bit(BIT_CLK_ENABLED, &prd->flags);
- }
-
- return 0;
-}
-
-int platform_pm_runtime_resume(struct device *dev)
-{
- struct pm_runtime_data *prd = __to_prd(dev);
-
- dev_dbg(dev, "platform_pm_runtime_resume()\n");
-
- platform_pm_runtime_init(dev, prd);
-
- if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
- clk_enable(prd->clk);
- set_bit(BIT_CLK_ENABLED, &prd->flags);
- }
-
- return 0;
-}
-
-int platform_pm_runtime_idle(struct device *dev)
+static int default_platform_runtime_idle(struct device *dev)
{
/* suspend synchronously to disable clocks immediately */
return pm_runtime_suspend(dev);
}
-static int platform_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- struct pm_runtime_data *prd;
+static struct dev_power_domain default_power_domain = {
+ .ops = {
+ .runtime_suspend = pm_runtime_clk_suspend,
+ .runtime_resume = pm_runtime_clk_resume,
+ .runtime_idle = default_platform_runtime_idle,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
- dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+#define DEFAULT_PWR_DOMAIN_PTR (&default_power_domain)
- if (action == BUS_NOTIFY_BIND_DRIVER) {
- prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
- if (prd)
- devres_add(dev, prd);
- else
- dev_err(dev, "unable to alloc memory for runtime pm\n");
- }
+#else
- return 0;
-}
-
-#else /* CONFIG_PM_RUNTIME */
-
-static int platform_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- struct clk *clk;
-
- dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
-
- switch (action) {
- case BUS_NOTIFY_BIND_DRIVER:
- clk = clk_get(dev, NULL);
- if (!IS_ERR(clk)) {
- clk_enable(clk);
- clk_put(clk);
- dev_info(dev, "runtime pm disabled, clock forced on\n");
- }
- break;
- case BUS_NOTIFY_UNBOUND_DRIVER:
- clk = clk_get(dev, NULL);
- if (!IS_ERR(clk)) {
- clk_disable(clk);
- clk_put(clk);
- dev_info(dev, "runtime pm disabled, clock forced off\n");
- }
- break;
- }
-
- return 0;
-}
+#define DEFAULT_PWR_DOMAIN_PTR NULL
#endif /* CONFIG_PM_RUNTIME */
-static struct notifier_block platform_bus_notifier = {
- .notifier_call = platform_bus_notify
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+ .con_ids = { NULL, },
};
static int __init sh_pm_runtime_init(void)
{
- bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+ pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
core_initcall(sh_pm_runtime_init);
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
index e0a8d60..a96babe 100644
--- a/arch/arm/mach-tcc8k/time.c
+++ b/arch/arm/mach-tcc8k/time.c
@@ -25,19 +25,6 @@
static void __iomem *timer_base;
-static cycle_t tcc_get_cycles(struct clocksource *cs)
-{
- return __raw_readl(timer_base + TC32MCNT_OFFS);
-}
-
-static struct clocksource clocksource_tcc = {
- .name = "tcc_tc32",
- .rating = 200,
- .read = tcc_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int tcc_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
@@ -102,7 +89,8 @@
{
unsigned int c = clk_get_rate(clock);
- clocksource_register_hz(&clocksource_tcc, c);
+ clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
+ 200, 32, clocksource_mmio_readl_up);
clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_tcc.shift);
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
index cc11517..425b42e 100644
--- a/arch/arm/mach-tegra/include/mach/barriers.h
+++ b/arch/arm/mach-tegra/include/mach/barriers.h
@@ -23,7 +23,7 @@
#include <asm/outercache.h>
-#define rmb() dmb()
+#define rmb() dsb()
#define wmb() do { dsb(); outer_sync(); } while (0)
#define mb() wmb()
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
deleted file mode 100644
index c8221b3..0000000
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index ec1f689..b8ae3c9 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -20,6 +20,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
@@ -122,6 +123,8 @@
for (i = 0; i < ncores; i++)
cpu_set(i, cpu_possible_map);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 0fcb1eb..9035042 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -98,11 +98,6 @@
}
}
-static cycle_t tegra_clocksource_read(struct clocksource *cs)
-{
- return timer_readl(TIMERUS_CNTR_1US);
-}
-
static struct clock_event_device tegra_clockevent = {
.name = "timer0",
.rating = 300,
@@ -111,14 +106,6 @@
.set_mode = tegra_timer_set_mode,
};
-static struct clocksource tegra_clocksource = {
- .name = "timer_us",
- .rating = 300,
- .read = tegra_clocksource_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static DEFINE_CLOCK_DATA(cd);
/*
@@ -234,7 +221,8 @@
init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
1000000, SC_MULT, SC_SHIFT);
- if (clocksource_register_hz(&tegra_clocksource, 1000000)) {
+ if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+ "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
printk(KERN_ERR "Failed to register clocksource\n");
BUG();
}
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 3ec58bd..891cf44 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -333,20 +333,6 @@
.handler = u300_timer_interrupt,
};
-/* Use general purpose timer 2 as clock source */
-static cycle_t u300_get_cycles(struct clocksource *cs)
-{
- return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
-}
-
-static struct clocksource clocksource_u300_1mhz = {
- .name = "GPT2",
- .rating = 300, /* Reasonably fast and accurate clock source */
- .read = u300_get_cycles,
- .mask = CLOCKSOURCE_MASK(32), /* 32 bits */
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
@@ -422,7 +408,9 @@
writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
- if (clocksource_register_hz(&clocksource_u300_1mhz, rate))
+ /* Use general purpose timer 2 as clock source */
+ if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
+ "GPT2", rate, 300, 32, clocksource_mmio_readl_up))
printk(KERN_ERR "timer: failed to initialize clock "
"source %s\n", clocksource_u300_1mhz.name);
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
deleted file mode 100644
index ca2b15b..0000000
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is based ARM realview platform.
- * Copyright (C) ARM Limited.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* This is required to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 4fff4d4..0c527fe 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -18,10 +18,14 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
@@ -94,7 +98,7 @@
*/
write_pen_release(cpu);
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -162,6 +166,8 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index eb7ffa0..0c99cf0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <asm/irq.h>
@@ -42,7 +43,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
@@ -190,27 +190,7 @@
#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-static int versatile_flash_init(void)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-
- return 0;
-}
-
-static void versatile_flash_exit(void)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static void versatile_flash_set_vpp(int on)
+static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
@@ -222,11 +202,8 @@
__raw_writel(val, VERSATILE_FLASHCTRL);
}
-static struct flash_platform_data versatile_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data versatile_flash_data = {
.width = 4,
- .init = versatile_flash_init,
- .exit = versatile_flash_exit,
.set_vpp = versatile_flash_set_vpp,
};
@@ -237,7 +214,7 @@
};
static struct platform_device versatile_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &versatile_flash_data,
@@ -375,6 +352,10 @@
.rate = 24000000,
};
+static struct clk sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup lookups[] = {
@@ -411,7 +392,10 @@
}, { /* CLCD */
.dev_id = "dev:20",
.clk = &osc4_clk,
- }
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .clk = &sp804_clk,
+ },
};
/*
@@ -764,8 +748,8 @@
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
- sp804_clocksource_init(TIMER3_VA_BASE);
- sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
+ sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
+ sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
}
struct sys_timer versatile_timer = {
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index ebc22e7..765a71f 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -71,8 +71,9 @@
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
- sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1));
- sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0);
+ sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1");
+ sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0,
+ "ct-timer0");
}
static struct sys_timer ct_ca9x4_timer = {
@@ -141,10 +142,22 @@
.rate = 24000000,
};
+static struct clk ct_sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk_lookup lookups[] = {
{ /* CLCD */
.dev_id = "ct:clcd",
.clk = &osc1_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "ct-timer0",
+ .clk = &ct_sp804_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "ct-timer1",
+ .clk = &ct_sp804_clk,
},
};
@@ -210,6 +223,8 @@
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
static void ct_ca9x4_smp_enable(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
deleted file mode 100644
index 4c05e4a..0000000
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MACH_SMP_H
-#define __MACH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index ba46e8e..285edcd 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -13,11 +13,11 @@
#include <linux/sysdev.h>
#include <linux/usb/isp1760.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
@@ -65,8 +65,9 @@
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
- sp804_clocksource_init(MMIO_P2V(V2M_TIMER1));
- sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0);
+ sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1");
+ sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0,
+ "v2m-timer0");
}
static struct sys_timer v2m_timer = {
@@ -206,27 +207,13 @@
.dev.platform_data = &v2m_usb_config,
};
-static int v2m_flash_init(void)
-{
- writel(0, MMIO_P2V(V2M_SYS_FLASH));
- return 0;
-}
-
-static void v2m_flash_exit(void)
-{
- writel(0, MMIO_P2V(V2M_SYS_FLASH));
-}
-
-static void v2m_flash_set_vpp(int on)
+static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
}
-static struct flash_platform_data v2m_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data v2m_flash_data = {
.width = 4,
- .init = v2m_flash_init,
- .exit = v2m_flash_exit,
.set_vpp = v2m_flash_set_vpp,
};
@@ -243,7 +230,7 @@
};
static struct platform_device v2m_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = -1,
.resource = v2m_flash_resources,
.num_resources = ARRAY_SIZE(v2m_flash_resources),
@@ -333,6 +320,10 @@
.rate = 24000000,
};
+static struct clk v2m_sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup v2m_lookups[] = {
@@ -363,6 +354,14 @@
}, { /* CLCD */
.dev_id = "mb:clcd",
.clk = &osc1_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer0",
+ .clk = &v2m_sp804_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer1",
+ .clk = &v2m_sp804_clk,
},
};
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 4b089cb..a2c4e2d 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -43,7 +43,6 @@
#define PRESCALE 0x63 /* Divider = prescale + 1 */
#define TDR_SHIFT 24
-#define TDR_MASK ((1 << TDR_SHIFT) - 1)
static unsigned int timer0_load;
@@ -143,19 +142,6 @@
clockevents_register_device(&nuc900_clockevent_device);
}
-static cycle_t nuc900_get_cycles(struct clocksource *cs)
-{
- return (~__raw_readl(REG_TDR1)) & TDR_MASK;
-}
-
-static struct clocksource clocksource_nuc900 = {
- .name = "nuc900-timer1",
- .rating = 200,
- .read = nuc900_get_cycles,
- .mask = CLOCKSOURCE_MASK(TDR_SHIFT),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void __init nuc900_clocksource_init(void)
{
unsigned int val;
@@ -175,7 +161,8 @@
val |= (COUNTEN | PERIOD | PRESCALE);
__raw_writel(val, REG_TCSR1);
- clocksource_register_hz(&clocksource_nuc900, rate);
+ clocksource_mmio_init(REG_TDR1, "nuc900-timer1", rate, 200,
+ TDR_SHIFT, clocksource_mmio_readl_down);
}
static void __init nuc900_timer_init(void)
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index e5f6fc4..76f82ae 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -201,6 +201,20 @@
}
}
+#ifdef CONFIG_ZONE_DMA
+static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
+ unsigned long dma_size)
+{
+ if (size[0] <= dma_size)
+ return;
+
+ size[ZONE_NORMAL] = size[0] - dma_size;
+ size[ZONE_DMA] = dma_size;
+ hole[ZONE_NORMAL] = hole[0];
+ hole[ZONE_DMA] = 0;
+}
+#endif
+
static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
unsigned long max_high)
{
@@ -243,11 +257,18 @@
#endif
}
+#ifdef ARM_DMA_ZONE_SIZE
+#ifndef CONFIG_ZONE_DMA
+#error ARM_DMA_ZONE_SIZE set but no DMA zone to limit allocations
+#endif
+
/*
* Adjust the sizes according to any special requirements for
* this machine type.
*/
- arch_adjust_zones(zone_size, zhole_size);
+ arm_adjust_dma_zone(zone_size, zhole_size,
+ ARM_DMA_ZONE_SIZE >> PAGE_SHIFT);
+#endif
free_area_init_node(0, zone_size, min, zhole_size);
}
@@ -392,7 +413,7 @@
* Convert start_pfn/end_pfn to a struct page pointer.
*/
start_pg = pfn_to_page(start_pfn - 1) + 1;
- end_pg = pfn_to_page(end_pfn);
+ end_pg = pfn_to_page(end_pfn - 1) + 1;
/*
* Convert to physical addresses, and
@@ -426,6 +447,14 @@
bank_start = bank_pfn_start(bank);
+#ifdef CONFIG_SPARSEMEM
+ /*
+ * Take care not to free memmap entries that don't exist
+ * due to SPARSEMEM sections which aren't present.
+ */
+ bank_start = min(bank_start,
+ ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
/*
* If we had a previous bank, and there is a space
* between the current bank and the previous, free it.
@@ -440,6 +469,12 @@
*/
prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
}
+
+#ifdef CONFIG_SPARSEMEM
+ if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
+ free_memmap(prev_bank_end,
+ ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
}
static void __init free_highpages(void)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index ce233bc..42af976 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -395,7 +395,7 @@
teq r2, #DMA_TO_DEVICE
beq xscale_dma_clean_range
b xscale_dma_flush_range
-ENDPROC(xscsale_dma_a0_map_area)
+ENDPROC(xscale_dma_a0_map_area)
/*
* dma_unmap_area(start, size, dir)
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d69d343..d3467f8 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -83,26 +83,12 @@
__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
}
-static cycle_t epit_read(struct clocksource *cs)
-{
- return 0 - __raw_readl(timer_base + EPITCNR);
-}
-
-static struct clocksource clocksource_epit = {
- .name = "epit",
- .rating = 200,
- .read = epit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int __init epit_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- clocksource_register_hz(&clocksource_epit, c);
-
- return 0;
+ return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
+ clocksource_mmio_readl_down);
}
/* clock event */
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7a10724..6cd6d7f 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -295,6 +295,12 @@
return 0;
}
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
{
int i, j;
@@ -311,6 +317,7 @@
__raw_writel(~0, port[i].base + GPIO_ISR);
for (j = port[i].virtual_irq_start;
j < port[i].virtual_irq_start + 32; j++) {
+ irq_set_lockdep_class(j, &gpio_lock_class);
irq_set_chip_and_handler(j, &gpio_irq_chip,
handle_level_irq);
set_irq_flags(j, IRQF_VALID);
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
index 4ddce56..8397a2d 100644
--- a/arch/arm/plat-mxc/ssi-fiq.S
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -124,6 +124,8 @@
1:
@ return from FIQ
subs pc, lr, #4
+
+ .align
imx_ssi_fiq_base:
.word 0x0
imx_ssi_fiq_rx_buffer:
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 2237ff8..e4ac94a 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -106,56 +106,32 @@
__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
}
-static cycle_t dummy_get_cycles(struct clocksource *cs)
-{
- return 0;
-}
-
-static cycle_t mx1_2_get_cycles(struct clocksource *cs)
-{
- return __raw_readl(timer_base + MX1_2_TCN);
-}
-
-static cycle_t v2_get_cycles(struct clocksource *cs)
-{
- return __raw_readl(timer_base + V2_TCN);
-}
-
-static struct clocksource clocksource_mxc = {
- .name = "mxc_timer1",
- .rating = 200,
- .read = dummy_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+static void __iomem *sched_clock_reg;
static DEFINE_CLOCK_DATA(cd);
unsigned long long notrace sched_clock(void)
{
- cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+ cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
static void notrace mxc_update_sched_clock(void)
{
- cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+ cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
update_sched_clock(&cd, cyc, (u32)~0);
}
static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
+ void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
- if (timer_is_v2())
- clocksource_mxc.read = v2_get_cycles;
- else
- clocksource_mxc.read = mx1_2_get_cycles;
+ sched_clock_reg = reg;
init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
- clocksource_register_hz(&clocksource_mxc, c);
-
- return 0;
+ return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
+ clocksource_mmio_readl_up);
}
/* clock event */
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 187f4e8..18296ee 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -5,6 +5,7 @@
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
+ select CLKSRC_MMIO
default y
help
Common platform code for Nomadik and other ST-Ericsson
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 4172340..ef74e157 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -26,29 +26,6 @@
void __iomem *mtu_base; /* Assigned by machine code */
/*
- * Kernel assumes that sched_clock can be called early
- * but the MTU may not yet be initialized.
- */
-static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
-{
- return 0;
-}
-
-/* clocksource: MTU decrements, so we negate the value being read. */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
- return -readl(mtu_base + MTU_VAL(0));
-}
-
-static struct clocksource nmdk_clksrc = {
- .name = "mtu_0",
- .rating = 200,
- .read = nmdk_read_timer_dummy,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
@@ -172,12 +149,10 @@
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
- /* Now the clock source is ready */
- nmdk_clksrc.read = nmdk_read_timer;
-
- if (clocksource_register_hz(&nmdk_clksrc, rate))
+ if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+ rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
- nmdk_clksrc.name);
+ "mtu_0");
init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index cd5f993..e9c0efc 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -12,6 +12,7 @@
config ARCH_OMAP1
bool "TI OMAP1"
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
help
"Systems based on omap7xx, omap15xx or omap16xx"
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d2adcdd..bd9e321 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -1372,9 +1372,7 @@
.resume_noirq = omap_mpuio_resume_noirq,
};
-/* use platform_driver for this, now that there's no longer any
- * point to sys_device (other than not disturbing old code).
- */
+/* use platform_driver for this. */
static struct platform_driver omap_mpuio_driver = {
.driver = {
.name = "mpuio",
@@ -1745,7 +1743,7 @@
}
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
+static int omap_gpio_suspend(void)
{
int i;
@@ -1795,12 +1793,12 @@
return 0;
}
-static int omap_gpio_resume(struct sys_device *dev)
+static void omap_gpio_resume(void)
{
int i;
if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
- return 0;
+ return;
for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
@@ -1836,21 +1834,13 @@
__raw_writel(bank->saved_wakeup, wake_set);
spin_unlock_irqrestore(&bank->lock, flags);
}
-
- return 0;
}
-static struct sysdev_class omap_gpio_sysclass = {
- .name = "gpio",
+static struct syscore_ops omap_gpio_syscore_ops = {
.suspend = omap_gpio_suspend,
.resume = omap_gpio_resume,
};
-static struct sys_device omap_gpio_device = {
- .id = 0,
- .cls = &omap_gpio_sysclass,
-};
-
#endif
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -2108,21 +2098,14 @@
static int __init omap_gpio_sysinit(void)
{
- int ret = 0;
-
mpuio_init();
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- if (ret == 0) {
- ret = sysdev_class_register(&omap_gpio_sysclass);
- if (ret == 0)
- ret = sysdev_register(&omap_gpio_device);
- }
- }
+ if (cpu_is_omap16xx() || cpu_class_is_omap2())
+ register_syscore_ops(&omap_gpio_syscore_ops);
#endif
- return ret;
+ return 0;
}
arch_initcall(omap_gpio_sysinit);
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
index 3e63270..3083195 100644
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -11,6 +11,6 @@
#include <linux/mtd/map.h>
-extern void omap1_set_vpp(struct map_info *map, int enable);
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
deleted file mode 100644
index 7a10257..0000000
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * OMAP4 machine specific smp.h
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Interface functions needed for the SMP. This file is based on arm
- * realview smp platform.
- * Copyright (c) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_SMP_H
-#define OMAP_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-
-/*
- * We use Soft IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 8a51fd5..34fc31e 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -793,6 +793,8 @@
clk_enable(obj->clk);
errs = iommu_report_fault(obj, &da);
clk_disable(obj->clk);
+ if (errs == 0)
+ return IRQ_HANDLED;
/* Fault callback or TLB/PTE Dynamic loading */
if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 9bbda9a..a37b8eb 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -536,6 +536,28 @@
return 0;
}
+static int _od_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return omap_device_idle(pdev);
+}
+
+static int _od_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return omap_device_enable(pdev);
+}
+
+static struct dev_power_domain omap_device_power_domain = {
+ .ops = {
+ .runtime_suspend = _od_runtime_suspend,
+ .runtime_resume = _od_runtime_resume,
+ USE_PLATFORM_PM_SLEEP_OPS
+ }
+};
+
/**
* omap_device_register - register an omap_device with one omap_hwmod
* @od: struct omap_device * to register
@@ -549,6 +571,7 @@
pr_debug("omap_device: %s: registering\n", od->pdev.name);
od->pdev.dev.parent = &omap_device_parent;
+ od->pdev.dev.pwr_domain = &omap_device_power_domain;
return platform_device_register(&od->pdev);
}
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 742b032..69a6136 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -81,24 +81,6 @@
}
/*
- * Clocksource handling.
- */
-static cycle_t orion_clksrc_read(struct clocksource *cs)
-{
- return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF);
-}
-
-static struct clocksource orion_clksrc = {
- .name = "orion_clocksource",
- .rating = 300,
- .read = orion_clksrc_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-
-/*
* Clockevent handling.
*/
static int
@@ -247,7 +229,8 @@
writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
- clocksource_register_hz(&orion_clksrc, tclk);
+ clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
+ tclk, 300, 32, clocksource_mmio_readl_down);
/*
* Setup clockevent timer (interrupt-driven).
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index dce088f..48ebb94 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/slab.h>
#include <mach/gpio.h>
@@ -295,7 +295,7 @@
}
#ifdef CONFIG_PM
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa_gpio_suspend(void)
{
struct pxa_gpio_chip *c;
int gpio;
@@ -312,7 +312,7 @@
return 0;
}
-static int pxa_gpio_resume(struct sys_device *dev)
+static void pxa_gpio_resume(void)
{
struct pxa_gpio_chip *c;
int gpio;
@@ -326,22 +326,13 @@
__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
}
- return 0;
}
#else
#define pxa_gpio_suspend NULL
#define pxa_gpio_resume NULL
#endif
-struct sysdev_class pxa_gpio_sysclass = {
- .name = "gpio",
+struct syscore_ops pxa_gpio_syscore_ops = {
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
-
-static int __init pxa_gpio_init(void)
-{
- return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index a9aa5ad..be12ead 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
#include <plat/mfp.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 27ea852..c10d10c 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -22,7 +22,7 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/io.h>
@@ -1195,19 +1195,12 @@
EXPORT_SYMBOL(s3c2410_dma_getposition);
-static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
-{
- return container_of(dev, struct s3c2410_dma_chan, dev);
-}
-
-/* system device class */
+/* system core operations */
#ifdef CONFIG_PM
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
{
- struct s3c2410_dma_chan *cp = to_dma_chan(dev);
-
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
@@ -1222,13 +1215,21 @@
s3c2410_dma_dostop(cp);
}
+}
+
+static int s3c2410_dma_suspend(void)
+{
+ struct s3c2410_dma_chan *cp = s3c2410_chans;
+ int channel;
+
+ for (channel = 0; channel < dma_channels; cp++, channel++)
+ s3c2410_dma_suspend_chan(cp);
return 0;
}
-static int s3c2410_dma_resume(struct sys_device *dev)
+static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
{
- struct s3c2410_dma_chan *cp = to_dma_chan(dev);
unsigned int no = cp->number | DMACH_LOW_LEVEL;
/* restore channel's hardware configuration */
@@ -1249,13 +1250,21 @@
return 0;
}
+static void s3c2410_dma_resume(void)
+{
+ struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
+ int channel;
+
+ for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+ s3c2410_dma_resume_chan(cp);
+}
+
#else
#define s3c2410_dma_suspend NULL
#define s3c2410_dma_resume NULL
#endif /* CONFIG_PM */
-struct sysdev_class dma_sysclass = {
- .name = "s3c24xx-dma",
+struct syscore_ops dma_syscore_ops = {
.suspend = s3c2410_dma_suspend,
.resume = s3c2410_dma_resume,
};
@@ -1269,39 +1278,14 @@
/* initialisation code */
-static int __init s3c24xx_dma_sysclass_init(void)
+static int __init s3c24xx_dma_syscore_init(void)
{
- int ret = sysdev_class_register(&dma_sysclass);
-
- if (ret != 0)
- printk(KERN_ERR "dma sysclass registration failed\n");
-
- return ret;
-}
-
-core_initcall(s3c24xx_dma_sysclass_init);
-
-static int __init s3c24xx_dma_sysdev_register(void)
-{
- struct s3c2410_dma_chan *cp = s3c2410_chans;
- int channel, ret;
-
- for (channel = 0; channel < dma_channels; cp++, channel++) {
- cp->dev.cls = &dma_sysclass;
- cp->dev.id = channel;
- ret = sysdev_register(&cp->dev);
-
- if (ret) {
- printk(KERN_ERR "error registering dev for dma %d\n",
- channel);
- return ret;
- }
- }
+ register_syscore_ops(&dma_syscore_ops);
return 0;
}
-late_initcall(s3c24xx_dma_sysdev_register);
+late_initcall(s3c24xx_dma_syscore_init);
int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
unsigned int stride)
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index c3624d8..0efb2e2 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <plat/cpu.h>
@@ -65,7 +64,7 @@
static unsigned long save_eintflt[4];
static unsigned long save_eintmask;
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+int s3c24xx_irq_suspend(void)
{
unsigned int i;
@@ -81,7 +80,7 @@
return 0;
}
-int s3c24xx_irq_resume(struct sys_device *dev)
+void s3c24xx_irq_resume(void)
{
unsigned int i;
@@ -93,6 +92,4 @@
s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
- return 0;
}
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
index 5259ad4..327acb3 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
#include <plat/cpu.h>
#include <plat/irqs.h>
@@ -77,17 +76,15 @@
SAVE_ITEM(S5P_EINT_MASK(3)),
};
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+int s3c24xx_irq_suspend(void)
{
s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
return 0;
}
-int s3c24xx_irq_resume(struct sys_device *dev)
+void s3c24xx_irq_resume(void)
{
s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-
- return 0;
}
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index 8090403..899a8cc 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -290,7 +290,7 @@
setup_irq(irq_number, &s5p_clock_event_irq);
}
-static cycle_t s5p_timer_read(struct clocksource *cs)
+static void __iomem *s5p_timer_reg(void)
{
unsigned long offset = 0;
@@ -308,10 +308,17 @@
default:
printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- return 0;
+ return NULL;
}
- return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset));
+ return S3C_TIMERREG(offset);
+}
+
+static cycle_t s5p_timer_read(struct clocksource *cs)
+{
+ void __iomem *reg = s5p_timer_reg();
+
+ return (cycle_t) (reg ? ~__raw_readl(reg) : 0);
}
/*
@@ -325,53 +332,22 @@
unsigned long long notrace sched_clock(void)
{
- u32 cyc;
- unsigned long offset = 0;
+ void __iomem *reg = s5p_timer_reg();
- switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case S5P_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
+ if (!reg)
return 0;
- }
- cyc = ~__raw_readl(S3C_TIMERREG(offset));
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+ return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
}
static void notrace s5p_update_sched_clock(void)
{
- u32 cyc;
- unsigned long offset = 0;
+ void __iomem *reg = s5p_timer_reg();
- switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
+ if (!reg)
+ return;
- case S5P_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- }
-
- cyc = ~__raw_readl(S3C_TIMERREG(offset));
- update_sched_clock(&cd, cyc, (u32)~0);
+ update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
}
struct clocksource time_clocksource = {
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index cedfff5..3aedac0 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -68,6 +68,12 @@
struct sys_timer;
extern struct sys_timer s3c24xx_timer;
+extern struct syscore_ops s3c2410_pm_syscore_ops;
+extern struct syscore_ops s3c2412_pm_syscore_ops;
+extern struct syscore_ops s3c2416_pm_syscore_ops;
+extern struct syscore_ops s3c244x_pm_syscore_ops;
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+
/* system device classes */
extern struct sysdev_class s3c2410_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 937cc2a..7fb6f6b 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -103,14 +103,16 @@
#ifdef CONFIG_PM
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
+extern int s3c24xx_irq_suspend(void);
+extern void s3c24xx_irq_resume(void);
#else
#define s3c_irqext_wake NULL
#define s3c24xx_irq_suspend NULL
#define s3c24xx_irq_resume NULL
#endif
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
/* PM debug functions */
#ifdef CONFIG_SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index dbb6e4f..0c77e42 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -70,19 +70,6 @@
static int clockevent_next_event(unsigned long evt,
struct clock_event_device *clk_event_dev);
-static cycle_t clocksource_read_cycles(struct clocksource *cs)
-{
- return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
-}
-
-static struct clocksource clksrc = {
- .name = "tmr1",
- .rating = 200, /* its a pretty decent clock */
- .read = clocksource_read_cycles,
- .mask = 0xFFFF, /* 16 bits */
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void spear_clocksource_init(void)
{
u32 tick_rate;
@@ -103,7 +90,8 @@
writew(val, gpt_base + CR(CLKSRC));
/* register the clocksource */
- clocksource_register_hz(&clksrc, tick_rate);
+ clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate,
+ 200, 16, clocksource_mmio_readw_up);
}
static struct clock_event_device clkevt = {
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index ba3d471..51ecfea 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -16,6 +16,7 @@
#include <linux/smp.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
/*
* control for which core is the next to come out of the secondary
@@ -83,7 +84,7 @@
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f746950..f25e7ec 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -398,9 +398,9 @@
}
#ifdef CONFIG_PM
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
-static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
+static int vfp_pm_suspend(void)
{
struct thread_info *ti = current_thread_info();
u32 fpexc = fmrx(FPEXC);
@@ -420,34 +420,25 @@
return 0;
}
-static int vfp_pm_resume(struct sys_device *dev)
+static void vfp_pm_resume(void)
{
/* ensure we have access to the vfp */
vfp_enable(NULL);
/* and disable it to ensure the next usage restores the state */
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-
- return 0;
}
-static struct sysdev_class vfp_pm_sysclass = {
- .name = "vfp",
+static struct syscore_ops vfp_pm_syscore_ops = {
.suspend = vfp_pm_suspend,
.resume = vfp_pm_resume,
};
-static struct sys_device vfp_pm_sysdev = {
- .cls = &vfp_pm_sysclass,
-};
-
static void vfp_pm_init(void)
{
- sysdev_class_register(&vfp_pm_sysclass);
- sysdev_register(&vfp_pm_sysdev);
+ register_syscore_ops(&vfp_pm_syscore_ops);
}
-
#else
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 21ce35f..3e36461 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -12,7 +12,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/io.h>
@@ -21,7 +21,6 @@
struct intc {
void __iomem *regs;
struct irq_chip chip;
- struct sys_device sysdev;
#ifdef CONFIG_PM
unsigned long suspend_ipr;
unsigned long saved_ipr[64];
@@ -146,9 +145,8 @@
intc0.suspend_ipr = offset;
}
-static int intc_suspend(struct sys_device *sdev, pm_message_t state)
+static int intc_suspend(void)
{
- struct intc *intc = container_of(sdev, struct intc, sysdev);
int i;
if (unlikely(!irqs_disabled())) {
@@ -156,28 +154,25 @@
return -EINVAL;
}
- if (unlikely(!intc->suspend_ipr)) {
+ if (unlikely(!intc0.suspend_ipr)) {
pr_err("intc_suspend: suspend_ipr not initialized\n");
return -EINVAL;
}
for (i = 0; i < 64; i++) {
- intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
- intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
+ intc0.saved_ipr[i] = intc_readl(&intc0, INTPR0 + 4 * i);
+ intc_writel(&intc0, INTPR0 + 4 * i, intc0.suspend_ipr);
}
return 0;
}
-static int intc_resume(struct sys_device *sdev)
+static int intc_resume(void)
{
- struct intc *intc = container_of(sdev, struct intc, sysdev);
int i;
- WARN_ON(!irqs_disabled());
-
for (i = 0; i < 64; i++)
- intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
+ intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]);
return 0;
}
@@ -186,27 +181,18 @@
#define intc_resume NULL
#endif
-static struct sysdev_class intc_class = {
- .name = "intc",
+static struct syscore_ops intc_syscore_ops = {
.suspend = intc_suspend,
.resume = intc_resume,
};
-static int __init intc_init_sysdev(void)
+static int __init intc_init_syscore(void)
{
- int ret;
+ register_syscore_ops(&intc_syscore_ops);
- ret = sysdev_class_register(&intc_class);
- if (ret)
- return ret;
-
- intc0.sysdev.id = 0;
- intc0.sysdev.cls = &intc_class;
- ret = sysdev_register(&intc0.sysdev);
-
- return ret;
+ return 0;
}
-device_initcall(intc_init_sysdev);
+device_initcall(intc_init_syscore);
unsigned long intc_get_pending(unsigned int group)
{
diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c
index 0b5f72f..401eb1d 100644
--- a/arch/blackfin/kernel/nmi.c
+++ b/arch/blackfin/kernel/nmi.c
@@ -12,7 +12,7 @@
#include <linux/bitops.h>
#include <linux/hardirq.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/pm.h>
#include <linux/nmi.h>
#include <linux/smp.h>
@@ -196,43 +196,31 @@
/* Suspend/resume support */
#ifdef CONFIG_PM
-static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state)
+static int nmi_wdt_suspend(void)
{
nmi_wdt_stop();
return 0;
}
-static int nmi_wdt_resume(struct sys_device *dev)
+static void nmi_wdt_resume(void)
{
if (nmi_active)
nmi_wdt_start();
- return 0;
}
-static struct sysdev_class nmi_sysclass = {
- .name = DRV_NAME,
+static struct syscore_ops nmi_syscore_ops = {
.resume = nmi_wdt_resume,
.suspend = nmi_wdt_suspend,
};
-static struct sys_device device_nmi_wdt = {
- .id = 0,
- .cls = &nmi_sysclass,
-};
-
-static int __init init_nmi_wdt_sysfs(void)
+static int __init init_nmi_wdt_syscore(void)
{
- int error;
+ if (nmi_active)
+ register_syscore_ops(&nmi_syscore_ops);
- if (!nmi_active)
- return 0;
-
- error = sysdev_class_register(&nmi_sysclass);
- if (!error)
- error = sysdev_register(&device_nmi_wdt);
- return error;
+ return 0;
}
-late_initcall(init_nmi_wdt_sysfs);
+late_initcall(init_nmi_wdt_syscore);
#endif /* CONFIG_PM */
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index cdb4beb..9e9b60d 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -23,29 +23,6 @@
#include <asm/gptimers.h>
#include <asm/nmi.h>
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- * basic equation:
- * ns = cycles / (freq / ns_per_sec)
- * ns = cycles * (ns_per_sec / freq)
- * ns = cycles * (10^9 / (cpu_khz * 10^3))
- * ns = cycles * (10^6 / cpu_khz)
- *
- * Then we use scaling math (suggested by george@mvista.com) to get:
- * ns = cycles * (10^6 * SC / cpu_khz) / SC
- * ns = cycles * cyc2ns_scale / SC
- *
- * And since SC is a constant power of two, we can convert the div
- * into a shift.
- *
- * We can use khz divisor instead of mhz to keep a better precision, since
- * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- * (mathieu.desnoyers@polymtl.ca)
- *
- * -johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
@@ -63,7 +40,6 @@
.rating = 400,
.read = bfin_read_cycles,
.mask = CLOCKSOURCE_MASK(64),
- .shift = CYC2NS_SCALE_FACTOR,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -75,10 +51,7 @@
static int __init bfin_cs_cycles_init(void)
{
- bfin_cs_cycles.mult = \
- clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
-
- if (clocksource_register(&bfin_cs_cycles))
+ if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
panic("failed to register clocksource");
return 0;
@@ -111,7 +84,6 @@
.rating = 350,
.read = bfin_read_gptimer0,
.mask = CLOCKSOURCE_MASK(32),
- .shift = CYC2NS_SCALE_FACTOR,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -125,10 +97,7 @@
{
setup_gptimer0();
- bfin_cs_gptimer0.mult = \
- clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
-
- if (clocksource_register(&bfin_cs_gptimer0))
+ if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
panic("failed to register clocksource");
return 0;
diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c
index 382099f..5e4112e 100644
--- a/arch/blackfin/mach-common/dpmc.c
+++ b/arch/blackfin/mach-common/dpmc.c
@@ -19,9 +19,6 @@
#define DRIVER_NAME "bfin dpmc"
-#define dprintk(msg...) \
- cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg)
-
struct bfin_dpmc_platform_data *pdata;
/**
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 8bce5ed..1fbd94c 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -177,6 +177,9 @@
while (msg_queue->count) {
msg = &msg_queue->ipi_message[msg_queue->head];
switch (msg->type) {
+ case BFIN_IPI_RESCHEDULE:
+ scheduler_ipi();
+ break;
case BFIN_IPI_CALL_FUNC:
spin_unlock_irqrestore(&msg_queue->lock, flags);
ipi_call_function(cpu, msg);
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 4c9e3e1..66cc756 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -342,15 +342,18 @@
ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi);
+ if (ipi.vector & IPI_SCHEDULE) {
+ scheduler_ipi();
+ }
if (ipi.vector & IPI_CALL) {
- func(info);
+ func(info);
}
if (ipi.vector & IPI_FLUSH_TLB) {
- if (flush_mm == FLUSH_ALL)
- __flush_tlb_all();
- else if (flush_vma == FLUSH_ALL)
+ if (flush_mm == FLUSH_ALL)
+ __flush_tlb_all();
+ else if (flush_vma == FLUSH_ALL)
__flush_tlb_mm(flush_mm);
- else
+ else
__flush_tlb_page(flush_vma, flush_addr);
}
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 4ce8d13..c04dd57 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -37,6 +37,7 @@
#include <linux/crash_dump.h>
#include <linux/iommu-helper.h>
#include <linux/dma-mapping.h>
+#include <linux/prefetch.h>
#include <asm/delay.h> /* ia64_get_itc() */
#include <asm/io.h>
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index 22f6152..f09b174 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -23,8 +23,6 @@
#include <linux/acpi.h>
#include <acpi/processor.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
-
MODULE_AUTHOR("Venkatesh Pallipadi");
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
@@ -47,12 +45,12 @@
{
s64 retval;
- dprintk("processor_set_pstate\n");
+ pr_debug("processor_set_pstate\n");
retval = ia64_pal_set_pstate((u64)value);
if (retval) {
- dprintk("Failed to set freq to 0x%x, with error 0x%lx\n",
+ pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n",
value, retval);
return -ENODEV;
}
@@ -67,14 +65,14 @@
u64 pstate_index = 0;
s64 retval;
- dprintk("processor_get_pstate\n");
+ pr_debug("processor_get_pstate\n");
retval = ia64_pal_get_pstate(&pstate_index,
PAL_GET_PSTATE_TYPE_INSTANT);
*value = (u32) pstate_index;
if (retval)
- dprintk("Failed to get current freq with "
+ pr_debug("Failed to get current freq with "
"error 0x%lx, idx 0x%x\n", retval, *value);
return (int)retval;
@@ -90,7 +88,7 @@
{
unsigned long i;
- dprintk("extract_clock\n");
+ pr_debug("extract_clock\n");
for (i = 0; i < data->acpi_data.state_count; i++) {
if (value == data->acpi_data.states[i].status)
@@ -110,7 +108,7 @@
cpumask_t saved_mask;
unsigned long clock_freq;
- dprintk("processor_get_freq\n");
+ pr_debug("processor_get_freq\n");
saved_mask = current->cpus_allowed;
set_cpus_allowed_ptr(current, cpumask_of(cpu));
@@ -148,7 +146,7 @@
cpumask_t saved_mask;
int retval;
- dprintk("processor_set_freq\n");
+ pr_debug("processor_set_freq\n");
saved_mask = current->cpus_allowed;
set_cpus_allowed_ptr(current, cpumask_of(cpu));
@@ -159,16 +157,16 @@
if (state == data->acpi_data.state) {
if (unlikely(data->resume)) {
- dprintk("Called after resume, resetting to P%d\n", state);
+ pr_debug("Called after resume, resetting to P%d\n", state);
data->resume = 0;
} else {
- dprintk("Already at target state (P%d)\n", state);
+ pr_debug("Already at target state (P%d)\n", state);
retval = 0;
goto migrate_end;
}
}
- dprintk("Transitioning from P%d to P%d\n",
+ pr_debug("Transitioning from P%d to P%d\n",
data->acpi_data.state, state);
/* cpufreq frequency struct */
@@ -186,7 +184,7 @@
value = (u32) data->acpi_data.states[state].control;
- dprintk("Transitioning to state: 0x%08x\n", value);
+ pr_debug("Transitioning to state: 0x%08x\n", value);
ret = processor_set_pstate(value);
if (ret) {
@@ -219,7 +217,7 @@
{
struct cpufreq_acpi_io *data = acpi_io_data[cpu];
- dprintk("acpi_cpufreq_get\n");
+ pr_debug("acpi_cpufreq_get\n");
return processor_get_freq(data, cpu);
}
@@ -235,7 +233,7 @@
unsigned int next_state = 0;
unsigned int result = 0;
- dprintk("acpi_cpufreq_setpolicy\n");
+ pr_debug("acpi_cpufreq_setpolicy\n");
result = cpufreq_frequency_table_target(policy,
data->freq_table, target_freq, relation, &next_state);
@@ -255,7 +253,7 @@
unsigned int result = 0;
struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
- dprintk("acpi_cpufreq_verify\n");
+ pr_debug("acpi_cpufreq_verify\n");
result = cpufreq_frequency_table_verify(policy,
data->freq_table);
@@ -273,7 +271,7 @@
struct cpufreq_acpi_io *data;
unsigned int result = 0;
- dprintk("acpi_cpufreq_cpu_init\n");
+ pr_debug("acpi_cpufreq_cpu_init\n");
data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
if (!data)
@@ -288,7 +286,7 @@
/* capability check */
if (data->acpi_data.state_count <= 1) {
- dprintk("No P-States\n");
+ pr_debug("No P-States\n");
result = -ENODEV;
goto err_unreg;
}
@@ -297,7 +295,7 @@
ACPI_ADR_SPACE_FIXED_HARDWARE) ||
(data->acpi_data.status_register.space_id !=
ACPI_ADR_SPACE_FIXED_HARDWARE)) {
- dprintk("Unsupported address space [%d, %d]\n",
+ pr_debug("Unsupported address space [%d, %d]\n",
(u32) (data->acpi_data.control_register.space_id),
(u32) (data->acpi_data.status_register.space_id));
result = -ENODEV;
@@ -348,7 +346,7 @@
"activated.\n", cpu);
for (i = 0; i < data->acpi_data.state_count; i++)
- dprintk(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
+ pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
(i == data->acpi_data.state?'*':' '), i,
(u32) data->acpi_data.states[i].core_frequency,
(u32) data->acpi_data.states[i].power,
@@ -383,7 +381,7 @@
{
struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
- dprintk("acpi_cpufreq_cpu_exit\n");
+ pr_debug("acpi_cpufreq_cpu_exit\n");
if (data) {
cpufreq_frequency_table_put_attr(policy->cpu);
@@ -418,7 +416,7 @@
static int __init
acpi_cpufreq_init (void)
{
- dprintk("acpi_cpufreq_init\n");
+ pr_debug("acpi_cpufreq_init\n");
return cpufreq_register_driver(&acpi_cpufreq_driver);
}
@@ -427,7 +425,7 @@
static void __exit
acpi_cpufreq_exit (void)
{
- dprintk("acpi_cpufreq_exit\n");
+ pr_debug("acpi_cpufreq_exit\n");
cpufreq_unregister_driver(&acpi_cpufreq_driver);
return;
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 1b811c6..f64097b 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -31,8 +31,6 @@
.rating = 300,
.read = read_cyclone,
.mask = (1LL << 40) - 1,
- .mult = 0, /*to be calculated*/
- .shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -118,9 +116,7 @@
/* initialize last tick */
cyclone_mc = cyclone_timer;
clocksource_cyclone.fsys_mmio = cyclone_timer;
- clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
- clocksource_cyclone.shift);
- clocksource_register(&clocksource_cyclone);
+ clocksource_register_hz(&clocksource_cyclone, CYCLONE_TIMER_FREQ);
return 0;
}
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 5b70474..782c3a35 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -31,6 +31,7 @@
#include <linux/irq.h>
#include <linux/ratelimit.h>
#include <linux/acpi.h>
+#include <linux/sched.h>
#include <asm/delay.h>
#include <asm/intrinsics.h>
@@ -496,6 +497,7 @@
smp_local_flush_tlb();
kstat_incr_irqs_this_cpu(irq, desc);
} else if (unlikely(IS_RESCHEDULE(vector))) {
+ scheduler_ipi();
kstat_incr_irqs_this_cpu(irq, desc);
} else {
ia64_setreg(_IA64_REG_CR_TPR, vector);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 156ad80..04440cc 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -73,8 +73,6 @@
.rating = 350,
.read = itc_get_cycles,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 0, /*to be calculated*/
- .shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
#ifdef CONFIG_PARAVIRT
.resume = paravirt_clocksource_resume,
@@ -365,11 +363,8 @@
ia64_cpu_local_tick();
if (!itc_clocksource) {
- /* Sort out mult/shift values: */
- clocksource_itc.mult =
- clocksource_hz2mult(local_cpu_data->itc_freq,
- clocksource_itc.shift);
- clocksource_register(&clocksource_itc);
+ clocksource_register_hz(&clocksource_itc,
+ local_cpu_data->itc_freq);
itc_clocksource = &clocksource_itc;
}
}
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 787de4a..53c0ba0 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -209,6 +209,7 @@
data : {
} :data
.data : AT(ADDR(.data) - LOAD_OFFSET) {
+ _sdata = .;
INIT_TASK_DATA(PAGE_SIZE)
CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES)
READ_MOSTLY_DATA(SMP_CACHE_BYTES)
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 0799fea..20b3593 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -10,6 +10,7 @@
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
+#include <linux/prefetch.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
diff --git a/arch/ia64/oprofile/backtrace.c b/arch/ia64/oprofile/backtrace.c
index 5cdd7e4..f7b7989 100644
--- a/arch/ia64/oprofile/backtrace.c
+++ b/arch/ia64/oprofile/backtrace.c
@@ -29,7 +29,7 @@
unsigned int depth;
struct pt_regs *regs;
struct unw_frame_info frame;
- u64 *prev_pfs_loc; /* state for WAR for old spinlock ool code */
+ unsigned long *prev_pfs_loc; /* state for WAR for old spinlock ool code */
} ia64_backtrace_t;
/* Returns non-zero if the PC is in the Interrupt Vector Table */
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index 21d6f09..c34efda 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -33,8 +33,6 @@
.rating = 450,
.read = read_sn2,
.mask = (1LL << 55) - 1,
- .mult = 0,
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -57,9 +55,7 @@
void __init sn_timer_init(void)
{
clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR;
- clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
- clocksource_sn2.shift);
- clocksource_register(&clocksource_sn2);
+ clocksource_register_hz(&clocksource_sn2, sn_rtc_cycles_per_second);
ia64_udelay = &ia64_sn_udelay;
}
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
index 108bb85..b279e14 100644
--- a/arch/ia64/xen/irq_xen.c
+++ b/arch/ia64/xen/irq_xen.c
@@ -92,6 +92,8 @@
static int xen_slab_ready;
#ifdef CONFIG_SMP
+#include <linux/sched.h>
+
/* Dummy stub. Though we may check XEN_RESCHEDULE_VECTOR before __do_IRQ,
* it ends up to issue several memory accesses upon percpu data and
* thus adds unnecessary traffic to other paths.
@@ -99,7 +101,13 @@
static irqreturn_t
xen_dummy_handler(int irq, void *dev_id)
{
+ return IRQ_HANDLED;
+}
+static irqreturn_t
+xen_resched_handler(int irq, void *dev_id)
+{
+ scheduler_ipi();
return IRQ_HANDLED;
}
@@ -110,7 +118,7 @@
};
static struct irqaction xen_resched_irqaction = {
- .handler = xen_dummy_handler,
+ .handler = xen_resched_handler,
.flags = IRQF_DISABLED,
.name = "resched"
};
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 31cef20..fc10b39 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -122,8 +122,6 @@
*
* Description: This routine executes on CPU which received
* 'RESCHEDULE_IPI'.
- * Rescheduling is processed at the exit of interrupt
- * operation.
*
* Born on Date: 2002.02.05
*
@@ -138,7 +136,7 @@
*==========================================================================*/
void smp_reschedule_interrupt(void)
{
- /* nothing to do */
+ scheduler_ipi();
}
/*==========================================================================*
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index c194d64..cf95aec 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -44,6 +44,7 @@
EXCEPTION_TABLE(16)
NOTES
+ _sdata = .; /* Start of data section */
RODATA
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .; /* End of data section */
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index b995513..95022b0 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -36,13 +36,10 @@
/* Hook for MIDI serial driver */
void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for mouse driver */
-void (*atari_mouse_interrupt_hook) (char *);
/* Hook for keyboard inputdev driver */
void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
/* Hook for mouse inputdev driver */
void (*atari_input_mouse_interrupt_hook) (char *);
-EXPORT_SYMBOL(atari_mouse_interrupt_hook);
EXPORT_SYMBOL(atari_input_keyboard_interrupt_hook);
EXPORT_SYMBOL(atari_input_mouse_interrupt_hook);
@@ -263,8 +260,8 @@
kb_state.buf[kb_state.len++] = scancode;
if (kb_state.len == 3) {
kb_state.state = KEYBOARD;
- if (atari_mouse_interrupt_hook)
- atari_mouse_interrupt_hook(kb_state.buf);
+ if (atari_input_mouse_interrupt_hook)
+ atari_input_mouse_interrupt_hook(kb_state.buf);
}
break;
@@ -575,7 +572,7 @@
kb_state.len = 0;
error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt,
- IRQ_TYPE_SLOW, "keyboard/mouse/MIDI",
+ IRQ_TYPE_SLOW, "keyboard,mouse,MIDI",
atari_keyboard_interrupt);
if (error)
return error;
diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c
index 604329f..ddbf43c 100644
--- a/arch/m68k/atari/stdma.c
+++ b/arch/m68k/atari/stdma.c
@@ -180,7 +180,7 @@
{
stdma_isr = NULL;
if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
- "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int))
+ "ST-DMA floppy,ACSI,IDE,Falcon-SCSI", stdma_int))
pr_err("Couldn't register ST-DMA interrupt\n");
}
diff --git a/arch/m68k/include/asm/atarikb.h b/arch/m68k/include/asm/atarikb.h
index 546e7da..68f3622 100644
--- a/arch/m68k/include/asm/atarikb.h
+++ b/arch/m68k/include/asm/atarikb.h
@@ -34,8 +34,6 @@
/* Hook for MIDI serial driver */
extern void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for mouse driver */
-extern void (*atari_mouse_interrupt_hook) (char *);
/* Hook for keyboard inputdev driver */
extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
/* Hook for mouse inputdev driver */
diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h
index 9d69f6e..e9020f8 100644
--- a/arch/m68k/include/asm/bitops_mm.h
+++ b/arch/m68k/include/asm/bitops_mm.h
@@ -181,14 +181,15 @@
{
const unsigned long *p = vaddr;
int res = 32;
+ unsigned int words;
unsigned long num;
if (!size)
return 0;
- size = (size + 31) >> 5;
+ words = (size + 31) >> 5;
while (!(num = ~*p++)) {
- if (!--size)
+ if (!--words)
goto out;
}
@@ -196,7 +197,8 @@
: "=d" (res) : "d" (num & -num));
res ^= 31;
out:
- return ((long)p - (long)vaddr - 4) * 8 + res;
+ res += ((long)p - (long)vaddr - 4) * 8;
+ return res < size ? res : size;
}
static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
@@ -215,27 +217,32 @@
/* Look for zero in first longword */
__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
: "=d" (res) : "d" (num & -num));
- if (res < 32)
- return offset + (res ^ 31);
+ if (res < 32) {
+ offset += res ^ 31;
+ return offset < size ? offset : size;
+ }
offset += 32;
+
+ if (offset >= size)
+ return size;
}
/* No zero yet, search remaining full bytes for a zero */
- res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8);
- return offset + res;
+ return offset + find_first_zero_bit(p, size - offset);
}
static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
{
const unsigned long *p = vaddr;
int res = 32;
+ unsigned int words;
unsigned long num;
if (!size)
return 0;
- size = (size + 31) >> 5;
+ words = (size + 31) >> 5;
while (!(num = *p++)) {
- if (!--size)
+ if (!--words)
goto out;
}
@@ -243,7 +250,8 @@
: "=d" (res) : "d" (num & -num));
res ^= 31;
out:
- return ((long)p - (long)vaddr - 4) * 8 + res;
+ res += ((long)p - (long)vaddr - 4) * 8;
+ return res < size ? res : size;
}
static inline int find_next_bit(const unsigned long *vaddr, int size,
@@ -262,13 +270,17 @@
/* Look for one in first longword */
__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
: "=d" (res) : "d" (num & -num));
- if (res < 32)
- return offset + (res ^ 31);
+ if (res < 32) {
+ offset += res ^ 31;
+ return offset < size ? offset : size;
+ }
offset += 32;
+
+ if (offset >= size)
+ return size;
}
/* No one yet, search remaining full bytes for a one */
- res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8);
- return offset + res;
+ return offset + find_first_bit(p, size - offset);
}
/*
@@ -366,23 +378,25 @@
static inline int find_first_zero_bit_le(const void *vaddr, unsigned size)
{
const unsigned long *p = vaddr, *addr = vaddr;
- int res;
+ int res = 0;
+ unsigned int words;
if (!size)
return 0;
- size = (size >> 5) + ((size & 31) > 0);
- while (*p++ == ~0UL)
- {
- if (--size == 0)
- return (p - addr) << 5;
+ words = (size >> 5) + ((size & 31) > 0);
+ while (*p++ == ~0UL) {
+ if (--words == 0)
+ goto out;
}
--p;
for (res = 0; res < 32; res++)
if (!test_bit_le(res, p))
break;
- return (p - addr) * 32 + res;
+out:
+ res += (p - addr) * 32;
+ return res < size ? res : size;
}
static inline unsigned long find_next_zero_bit_le(const void *addr,
@@ -400,10 +414,15 @@
offset -= bit;
/* Look for zero in first longword */
for (res = bit; res < 32; res++)
- if (!test_bit_le(res, p))
- return offset + res;
+ if (!test_bit_le(res, p)) {
+ offset += res;
+ return offset < size ? offset : size;
+ }
p++;
offset += 32;
+
+ if (offset >= size)
+ return size;
}
/* No zero yet, search remaining full bytes for a zero */
return offset + find_first_zero_bit_le(p, size - offset);
@@ -412,22 +431,25 @@
static inline int find_first_bit_le(const void *vaddr, unsigned size)
{
const unsigned long *p = vaddr, *addr = vaddr;
- int res;
+ int res = 0;
+ unsigned int words;
if (!size)
return 0;
- size = (size >> 5) + ((size & 31) > 0);
+ words = (size >> 5) + ((size & 31) > 0);
while (*p++ == 0UL) {
- if (--size == 0)
- return (p - addr) << 5;
+ if (--words == 0)
+ goto out;
}
--p;
for (res = 0; res < 32; res++)
if (test_bit_le(res, p))
break;
- return (p - addr) * 32 + res;
+out:
+ res += (p - addr) * 32;
+ return res < size ? res : size;
}
static inline unsigned long find_next_bit_le(const void *addr,
@@ -445,10 +467,15 @@
offset -= bit;
/* Look for one in first longword */
for (res = bit; res < 32; res++)
- if (test_bit_le(res, p))
- return offset + res;
+ if (test_bit_le(res, p)) {
+ offset += res;
+ return offset < size ? offset : size;
+ }
p++;
offset += 32;
+
+ if (offset >= size)
+ return size;
}
/* No set bit yet, search remaining full bytes for a set bit */
return offset + find_first_bit_le(p, size - offset);
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 29e1790..f3b649d 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -22,7 +22,7 @@
#define __NR_mknod 14
#define __NR_chmod 15
#define __NR_chown 16
-#define __NR_break 17
+/*#define __NR_break 17*/
#define __NR_oldstat 18
#define __NR_lseek 19
#define __NR_getpid 20
@@ -36,11 +36,11 @@
#define __NR_oldfstat 28
#define __NR_pause 29
#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
+/*#define __NR_stty 31*/
+/*#define __NR_gtty 32*/
#define __NR_access 33
#define __NR_nice 34
-#define __NR_ftime 35
+/*#define __NR_ftime 35*/
#define __NR_sync 36
#define __NR_kill 37
#define __NR_rename 38
@@ -49,7 +49,7 @@
#define __NR_dup 41
#define __NR_pipe 42
#define __NR_times 43
-#define __NR_prof 44
+/*#define __NR_prof 44*/
#define __NR_brk 45
#define __NR_setgid 46
#define __NR_getgid 47
@@ -58,13 +58,13 @@
#define __NR_getegid 50
#define __NR_acct 51
#define __NR_umount2 52
-#define __NR_lock 53
+/*#define __NR_lock 53*/
#define __NR_ioctl 54
#define __NR_fcntl 55
-#define __NR_mpx 56
+/*#define __NR_mpx 56*/
#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
+/*#define __NR_ulimit 58*/
+/*#define __NR_oldolduname 59*/
#define __NR_umask 60
#define __NR_chroot 61
#define __NR_ustat 62
@@ -103,10 +103,10 @@
#define __NR_fchown 95
#define __NR_getpriority 96
#define __NR_setpriority 97
-#define __NR_profil 98
+/*#define __NR_profil 98*/
#define __NR_statfs 99
#define __NR_fstatfs 100
-#define __NR_ioperm 101
+/*#define __NR_ioperm 101*/
#define __NR_socketcall 102
#define __NR_syslog 103
#define __NR_setitimer 104
@@ -114,11 +114,11 @@
#define __NR_stat 106
#define __NR_lstat 107
#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
+/*#define __NR_olduname 109*/
+/*#define __NR_iopl 110*/ /* not supported */
#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
+/*#define __NR_idle 112*/ /* Obsolete */
+/*#define __NR_vm86 113*/ /* not supported */
#define __NR_wait4 114
#define __NR_swapoff 115
#define __NR_sysinfo 116
@@ -132,17 +132,17 @@
#define __NR_adjtimex 124
#define __NR_mprotect 125
#define __NR_sigprocmask 126
-#define __NR_create_module 127
+/*#define __NR_create_module 127*/
#define __NR_init_module 128
#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
+/*#define __NR_get_kernel_syms 130*/
#define __NR_quotactl 131
#define __NR_getpgid 132
#define __NR_fchdir 133
#define __NR_bdflush 134
#define __NR_sysfs 135
#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */
#define __NR_setfsuid 138
#define __NR_setfsgid 139
#define __NR__llseek 140
@@ -172,7 +172,7 @@
#define __NR_setresuid 164
#define __NR_getresuid 165
#define __NR_getpagesize 166
-#define __NR_query_module 167
+/*#define __NR_query_module 167*/
#define __NR_poll 168
#define __NR_nfsservctl 169
#define __NR_setresgid 170
@@ -193,8 +193,8 @@
#define __NR_capset 185
#define __NR_sigaltstack 186
#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
+/*#define __NR_getpmsg 188*/ /* some people actually want streams */
+/*#define __NR_putpmsg 189*/ /* some people actually want streams */
#define __NR_vfork 190
#define __NR_ugetrlimit 191
#define __NR_mmap2 192
@@ -223,6 +223,8 @@
#define __NR_setfsuid32 215
#define __NR_setfsgid32 216
#define __NR_pivot_root 217
+/* 218*/
+/* 219*/
#define __NR_getdents64 220
#define __NR_gettid 221
#define __NR_tkill 222
@@ -281,7 +283,7 @@
#define __NR_mq_notify 275
#define __NR_mq_getsetattr 276
#define __NR_waitid 277
-#define __NR_vserver 278
+/*#define __NR_vserver 278*/
#define __NR_add_key 279
#define __NR_request_key 280
#define __NR_keyctl 281
diff --git a/arch/m68k/kernel/Makefile_mm b/arch/m68k/kernel/Makefile_mm
index 55d5d6b..aced678 100644
--- a/arch/m68k/kernel/Makefile_mm
+++ b/arch/m68k/kernel/Makefile_mm
@@ -10,7 +10,7 @@
extra-y += vmlinux.lds
obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
- sys_m68k.o time.o setup.o m68k_ksyms.o devres.o
+ sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o
devres-y = ../../../kernel/irq/devres.o
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index 1359ee6..bd0ec05 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -407,351 +407,3 @@
rts
-.data
-ALIGN
-sys_call_table:
- .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
- .long sys_exit
- .long sys_fork
- .long sys_read
- .long sys_write
- .long sys_open /* 5 */
- .long sys_close
- .long sys_waitpid
- .long sys_creat
- .long sys_link
- .long sys_unlink /* 10 */
- .long sys_execve
- .long sys_chdir
- .long sys_time
- .long sys_mknod
- .long sys_chmod /* 15 */
- .long sys_chown16
- .long sys_ni_syscall /* old break syscall holder */
- .long sys_stat
- .long sys_lseek
- .long sys_getpid /* 20 */
- .long sys_mount
- .long sys_oldumount
- .long sys_setuid16
- .long sys_getuid16
- .long sys_stime /* 25 */
- .long sys_ptrace
- .long sys_alarm
- .long sys_fstat
- .long sys_pause
- .long sys_utime /* 30 */
- .long sys_ni_syscall /* old stty syscall holder */
- .long sys_ni_syscall /* old gtty syscall holder */
- .long sys_access
- .long sys_nice
- .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
- .long sys_rmdir /* 40 */
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* old prof syscall holder */
- .long sys_brk /* 45 */
- .long sys_setgid16
- .long sys_getgid16
- .long sys_signal
- .long sys_geteuid16
- .long sys_getegid16 /* 50 */
- .long sys_acct
- .long sys_umount /* recycled never used phys() */
- .long sys_ni_syscall /* old lock syscall holder */
- .long sys_ioctl
- .long sys_fcntl /* 55 */
- .long sys_ni_syscall /* old mpx syscall holder */
- .long sys_setpgid
- .long sys_ni_syscall /* old ulimit syscall holder */
- .long sys_ni_syscall
- .long sys_umask /* 60 */
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
- .long sys_getpgrp /* 65 */
- .long sys_setsid
- .long sys_sigaction
- .long sys_sgetmask
- .long sys_ssetmask
- .long sys_setreuid16 /* 70 */
- .long sys_setregid16
- .long sys_sigsuspend
- .long sys_sigpending
- .long sys_sethostname
- .long sys_setrlimit /* 75 */
- .long sys_old_getrlimit
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
- .long sys_getgroups16 /* 80 */
- .long sys_setgroups16
- .long sys_old_select
- .long sys_symlink
- .long sys_lstat
- .long sys_readlink /* 85 */
- .long sys_uselib
- .long sys_swapon
- .long sys_reboot
- .long sys_old_readdir
- .long sys_old_mmap /* 90 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
- .long sys_fchown16 /* 95 */
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* old profil syscall holder */
- .long sys_statfs
- .long sys_fstatfs /* 100 */
- .long sys_ni_syscall /* ioperm for i386 */
- .long sys_socketcall
- .long sys_syslog
- .long sys_setitimer
- .long sys_getitimer /* 105 */
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_ni_syscall
- .long sys_ni_syscall /* 110 */ /* iopl for i386 */
- .long sys_vhangup
- .long sys_ni_syscall /* obsolete idle() syscall */
- .long sys_ni_syscall /* vm86old for i386 */
- .long sys_wait4
- .long sys_swapoff /* 115 */
- .long sys_sysinfo
- .long sys_ipc
- .long sys_fsync
- .long sys_sigreturn
- .long sys_clone /* 120 */
- .long sys_setdomainname
- .long sys_newuname
- .long sys_cacheflush /* modify_ldt for i386 */
- .long sys_adjtimex
- .long sys_mprotect /* 125 */
- .long sys_sigprocmask
- .long sys_ni_syscall /* old "create_module" */
- .long sys_init_module
- .long sys_delete_module
- .long sys_ni_syscall /* 130 - old "get_kernel_syms" */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
- .long sys_sysfs /* 135 */
- .long sys_personality
- .long sys_ni_syscall /* for afs_syscall */
- .long sys_setfsuid16
- .long sys_setfsgid16
- .long sys_llseek /* 140 */
- .long sys_getdents
- .long sys_select
- .long sys_flock
- .long sys_msync
- .long sys_readv /* 145 */
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
- .long sys_mlock /* 150 */
- .long sys_munlock
- .long sys_mlockall
- .long sys_munlockall
- .long sys_sched_setparam
- .long sys_sched_getparam /* 155 */
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
- .long sys_sched_get_priority_min /* 160 */
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_mremap
- .long sys_setresuid16
- .long sys_getresuid16 /* 165 */
- .long sys_getpagesize
- .long sys_ni_syscall /* old sys_query_module */
- .long sys_poll
- .long sys_nfsservctl
- .long sys_setresgid16 /* 170 */
- .long sys_getresgid16
- .long sys_prctl
- .long sys_rt_sigreturn
- .long sys_rt_sigaction
- .long sys_rt_sigprocmask /* 175 */
- .long sys_rt_sigpending
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend
- .long sys_pread64 /* 180 */
- .long sys_pwrite64
- .long sys_lchown16;
- .long sys_getcwd
- .long sys_capget
- .long sys_capset /* 185 */
- .long sys_sigaltstack
- .long sys_sendfile
- .long sys_ni_syscall /* streams1 */
- .long sys_ni_syscall /* streams2 */
- .long sys_vfork /* 190 */
- .long sys_getrlimit
- .long sys_mmap2
- .long sys_truncate64
- .long sys_ftruncate64
- .long sys_stat64 /* 195 */
- .long sys_lstat64
- .long sys_fstat64
- .long sys_chown
- .long sys_getuid
- .long sys_getgid /* 200 */
- .long sys_geteuid
- .long sys_getegid
- .long sys_setreuid
- .long sys_setregid
- .long sys_getgroups /* 205 */
- .long sys_setgroups
- .long sys_fchown
- .long sys_setresuid
- .long sys_getresuid
- .long sys_setresgid /* 210 */
- .long sys_getresgid
- .long sys_lchown
- .long sys_setuid
- .long sys_setgid
- .long sys_setfsuid /* 215 */
- .long sys_setfsgid
- .long sys_pivot_root
- .long sys_ni_syscall
- .long sys_ni_syscall
- .long sys_getdents64 /* 220 */
- .long sys_gettid
- .long sys_tkill
- .long sys_setxattr
- .long sys_lsetxattr
- .long sys_fsetxattr /* 225 */
- .long sys_getxattr
- .long sys_lgetxattr
- .long sys_fgetxattr
- .long sys_listxattr
- .long sys_llistxattr /* 230 */
- .long sys_flistxattr
- .long sys_removexattr
- .long sys_lremovexattr
- .long sys_fremovexattr
- .long sys_futex /* 235 */
- .long sys_sendfile64
- .long sys_mincore
- .long sys_madvise
- .long sys_fcntl64
- .long sys_readahead /* 240 */
- .long sys_io_setup
- .long sys_io_destroy
- .long sys_io_getevents
- .long sys_io_submit
- .long sys_io_cancel /* 245 */
- .long sys_fadvise64
- .long sys_exit_group
- .long sys_lookup_dcookie
- .long sys_epoll_create
- .long sys_epoll_ctl /* 250 */
- .long sys_epoll_wait
- .long sys_remap_file_pages
- .long sys_set_tid_address
- .long sys_timer_create
- .long sys_timer_settime /* 255 */
- .long sys_timer_gettime
- .long sys_timer_getoverrun
- .long sys_timer_delete
- .long sys_clock_settime
- .long sys_clock_gettime /* 260 */
- .long sys_clock_getres
- .long sys_clock_nanosleep
- .long sys_statfs64
- .long sys_fstatfs64
- .long sys_tgkill /* 265 */
- .long sys_utimes
- .long sys_fadvise64_64
- .long sys_mbind
- .long sys_get_mempolicy
- .long sys_set_mempolicy /* 270 */
- .long sys_mq_open
- .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive
- .long sys_mq_notify /* 275 */
- .long sys_mq_getsetattr
- .long sys_waitid
- .long sys_ni_syscall /* for sys_vserver */
- .long sys_add_key
- .long sys_request_key /* 280 */
- .long sys_keyctl
- .long sys_ioprio_set
- .long sys_ioprio_get
- .long sys_inotify_init
- .long sys_inotify_add_watch /* 285 */
- .long sys_inotify_rm_watch
- .long sys_migrate_pages
- .long sys_openat
- .long sys_mkdirat
- .long sys_mknodat /* 290 */
- .long sys_fchownat
- .long sys_futimesat
- .long sys_fstatat64
- .long sys_unlinkat
- .long sys_renameat /* 295 */
- .long sys_linkat
- .long sys_symlinkat
- .long sys_readlinkat
- .long sys_fchmodat
- .long sys_faccessat /* 300 */
- .long sys_ni_syscall /* Reserved for pselect6 */
- .long sys_ni_syscall /* Reserved for ppoll */
- .long sys_unshare
- .long sys_set_robust_list
- .long sys_get_robust_list /* 305 */
- .long sys_splice
- .long sys_sync_file_range
- .long sys_tee
- .long sys_vmsplice
- .long sys_move_pages /* 310 */
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity
- .long sys_kexec_load
- .long sys_getcpu
- .long sys_epoll_pwait /* 315 */
- .long sys_utimensat
- .long sys_signalfd
- .long sys_timerfd_create
- .long sys_eventfd
- .long sys_fallocate /* 320 */
- .long sys_timerfd_settime
- .long sys_timerfd_gettime
- .long sys_signalfd4
- .long sys_eventfd2
- .long sys_epoll_create1 /* 325 */
- .long sys_dup3
- .long sys_pipe2
- .long sys_inotify_init1
- .long sys_preadv
- .long sys_pwritev /* 330 */
- .long sys_rt_tgsigqueueinfo
- .long sys_perf_event_open
- .long sys_get_thread_area
- .long sys_set_thread_area
- .long sys_atomic_cmpxchg_32 /* 335 */
- .long sys_atomic_barrier
- .long sys_fanotify_init
- .long sys_fanotify_mark
- .long sys_prlimit64
- .long sys_name_to_handle_at /* 340 */
- .long sys_open_by_handle_at
- .long sys_clock_adjtime
- .long sys_syncfs
-
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 9b8393d..5909e39 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -1,6 +1,4 @@
/*
- * linux/arch/m68knommu/kernel/syscalltable.S
- *
* Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
*
* Based on older entry.S files, the following copyrights apply:
@@ -9,171 +7,176 @@
* Kenneth Albanowski <kjahds@kjahds.com>,
* Copyright (C) 2000 Lineo Inc. (www.lineo.com)
* Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Linux/m68k support by Hamish Macdonald
*/
#include <linux/sys.h>
#include <linux/linkage.h>
-#include <asm/unistd.h>
-.text
+#ifndef CONFIG_MMU
+#define sys_mmap2 sys_mmap_pgoff
+#endif
+
+.section .rodata
ALIGN
ENTRY(sys_call_table)
- .long sys_restart_syscall /* 0 - old "setup()" system call */
+ .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
.long sys_exit
.long sys_fork
.long sys_read
.long sys_write
- .long sys_open /* 5 */
+ .long sys_open /* 5 */
.long sys_close
.long sys_waitpid
.long sys_creat
.long sys_link
- .long sys_unlink /* 10 */
+ .long sys_unlink /* 10 */
.long sys_execve
.long sys_chdir
.long sys_time
.long sys_mknod
- .long sys_chmod /* 15 */
+ .long sys_chmod /* 15 */
.long sys_chown16
- .long sys_ni_syscall /* old break syscall holder */
+ .long sys_ni_syscall /* old break syscall holder */
.long sys_stat
.long sys_lseek
- .long sys_getpid /* 20 */
+ .long sys_getpid /* 20 */
.long sys_mount
.long sys_oldumount
.long sys_setuid16
.long sys_getuid16
- .long sys_stime /* 25 */
+ .long sys_stime /* 25 */
.long sys_ptrace
.long sys_alarm
.long sys_fstat
.long sys_pause
- .long sys_utime /* 30 */
- .long sys_ni_syscall /* old stty syscall holder */
- .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
.long sys_access
.long sys_nice
- .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long sys_ni_syscall /* 35 - old ftime syscall holder */
.long sys_sync
.long sys_kill
.long sys_rename
.long sys_mkdir
- .long sys_rmdir /* 40 */
+ .long sys_rmdir /* 40 */
.long sys_dup
.long sys_pipe
.long sys_times
- .long sys_ni_syscall /* old prof syscall holder */
- .long sys_brk /* 45 */
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
.long sys_setgid16
.long sys_getgid16
.long sys_signal
.long sys_geteuid16
- .long sys_getegid16 /* 50 */
+ .long sys_getegid16 /* 50 */
.long sys_acct
- .long sys_umount /* recycled never used phys() */
- .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
.long sys_ioctl
- .long sys_fcntl /* 55 */
- .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
.long sys_setpgid
- .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old ulimit syscall holder */
.long sys_ni_syscall
- .long sys_umask /* 60 */
+ .long sys_umask /* 60 */
.long sys_chroot
.long sys_ustat
.long sys_dup2
.long sys_getppid
- .long sys_getpgrp /* 65 */
+ .long sys_getpgrp /* 65 */
.long sys_setsid
.long sys_sigaction
.long sys_sgetmask
.long sys_ssetmask
- .long sys_setreuid16 /* 70 */
+ .long sys_setreuid16 /* 70 */
.long sys_setregid16
.long sys_sigsuspend
.long sys_sigpending
.long sys_sethostname
- .long sys_setrlimit /* 75 */
+ .long sys_setrlimit /* 75 */
.long sys_old_getrlimit
.long sys_getrusage
.long sys_gettimeofday
.long sys_settimeofday
- .long sys_getgroups16 /* 80 */
+ .long sys_getgroups16 /* 80 */
.long sys_setgroups16
.long sys_old_select
.long sys_symlink
.long sys_lstat
- .long sys_readlink /* 85 */
+ .long sys_readlink /* 85 */
.long sys_uselib
- .long sys_ni_syscall /* sys_swapon */
+ .long sys_swapon
.long sys_reboot
.long sys_old_readdir
- .long sys_old_mmap /* 90 */
+ .long sys_old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
.long sys_ftruncate
.long sys_fchmod
- .long sys_fchown16 /* 95 */
+ .long sys_fchown16 /* 95 */
.long sys_getpriority
.long sys_setpriority
- .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_ni_syscall /* old profil syscall holder */
.long sys_statfs
- .long sys_fstatfs /* 100 */
- .long sys_ni_syscall /* ioperm for i386 */
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm for i386 */
.long sys_socketcall
.long sys_syslog
.long sys_setitimer
- .long sys_getitimer /* 105 */
+ .long sys_getitimer /* 105 */
.long sys_newstat
.long sys_newlstat
.long sys_newfstat
.long sys_ni_syscall
- .long sys_ni_syscall /* iopl for i386 */ /* 110 */
+ .long sys_ni_syscall /* 110 - iopl for i386 */
.long sys_vhangup
- .long sys_ni_syscall /* obsolete idle() syscall */
- .long sys_ni_syscall /* vm86old for i386 */
+ .long sys_ni_syscall /* obsolete idle() syscall */
+ .long sys_ni_syscall /* vm86old for i386 */
.long sys_wait4
- .long sys_ni_syscall /* 115 */ /* sys_swapoff */
+ .long sys_swapoff /* 115 */
.long sys_sysinfo
.long sys_ipc
.long sys_fsync
.long sys_sigreturn
- .long sys_clone /* 120 */
+ .long sys_clone /* 120 */
.long sys_setdomainname
.long sys_newuname
- .long sys_cacheflush /* modify_ldt for i386 */
+ .long sys_cacheflush /* modify_ldt for i386 */
.long sys_adjtimex
- .long sys_ni_syscall /* 125 */ /* sys_mprotect */
+ .long sys_mprotect /* 125 */
.long sys_sigprocmask
- .long sys_ni_syscall /* old "creat_module" */
+ .long sys_ni_syscall /* old "create_module" */
.long sys_init_module
.long sys_delete_module
- .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_ni_syscall /* 130 - old "get_kernel_syms" */
.long sys_quotactl
.long sys_getpgid
.long sys_fchdir
.long sys_bdflush
- .long sys_sysfs /* 135 */
+ .long sys_sysfs /* 135 */
.long sys_personality
- .long sys_ni_syscall /* for afs_syscall */
+ .long sys_ni_syscall /* for afs_syscall */
.long sys_setfsuid16
.long sys_setfsgid16
- .long sys_llseek /* 140 */
+ .long sys_llseek /* 140 */
.long sys_getdents
.long sys_select
.long sys_flock
- .long sys_ni_syscall /* sys_msync */
- .long sys_readv /* 145 */
+ .long sys_msync
+ .long sys_readv /* 145 */
.long sys_writev
.long sys_getsid
.long sys_fdatasync
.long sys_sysctl
- .long sys_ni_syscall /* 150 */ /* sys_mlock */
- .long sys_ni_syscall /* sys_munlock */
- .long sys_ni_syscall /* sys_mlockall */
- .long sys_ni_syscall /* sys_munlockall */
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
.long sys_sched_setparam
- .long sys_sched_getparam /* 155 */
+ .long sys_sched_getparam /* 155 */
.long sys_sched_setscheduler
.long sys_sched_getscheduler
.long sys_sched_yield
@@ -181,124 +184,124 @@
.long sys_sched_get_priority_min /* 160 */
.long sys_sched_rr_get_interval
.long sys_nanosleep
- .long sys_ni_syscall /* sys_mremap */
+ .long sys_mremap
.long sys_setresuid16
- .long sys_getresuid16 /* 165 */
- .long sys_getpagesize /* sys_getpagesize */
- .long sys_ni_syscall /* old "query_module" */
+ .long sys_getresuid16 /* 165 */
+ .long sys_getpagesize
+ .long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_ni_syscall /* sys_nfsservctl */
- .long sys_setresgid16 /* 170 */
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
.long sys_rt_sigreturn
.long sys_rt_sigaction
- .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigprocmask /* 175 */
.long sys_rt_sigpending
.long sys_rt_sigtimedwait
.long sys_rt_sigqueueinfo
.long sys_rt_sigsuspend
- .long sys_pread64 /* 180 */
+ .long sys_pread64 /* 180 */
.long sys_pwrite64
.long sys_lchown16
.long sys_getcwd
.long sys_capget
- .long sys_capset /* 185 */
+ .long sys_capset /* 185 */
.long sys_sigaltstack
.long sys_sendfile
- .long sys_ni_syscall /* streams1 */
- .long sys_ni_syscall /* streams2 */
- .long sys_vfork /* 190 */
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long sys_vfork /* 190 */
.long sys_getrlimit
- .long sys_mmap_pgoff
+ .long sys_mmap2
.long sys_truncate64
.long sys_ftruncate64
- .long sys_stat64 /* 195 */
+ .long sys_stat64 /* 195 */
.long sys_lstat64
.long sys_fstat64
.long sys_chown
.long sys_getuid
- .long sys_getgid /* 200 */
+ .long sys_getgid /* 200 */
.long sys_geteuid
.long sys_getegid
.long sys_setreuid
.long sys_setregid
- .long sys_getgroups /* 205 */
+ .long sys_getgroups /* 205 */
.long sys_setgroups
.long sys_fchown
.long sys_setresuid
.long sys_getresuid
- .long sys_setresgid /* 210 */
+ .long sys_setresgid /* 210 */
.long sys_getresgid
.long sys_lchown
.long sys_setuid
.long sys_setgid
- .long sys_setfsuid /* 215 */
+ .long sys_setfsuid /* 215 */
.long sys_setfsgid
.long sys_pivot_root
.long sys_ni_syscall
.long sys_ni_syscall
- .long sys_getdents64 /* 220 */
+ .long sys_getdents64 /* 220 */
.long sys_gettid
.long sys_tkill
.long sys_setxattr
.long sys_lsetxattr
- .long sys_fsetxattr /* 225 */
+ .long sys_fsetxattr /* 225 */
.long sys_getxattr
.long sys_lgetxattr
.long sys_fgetxattr
.long sys_listxattr
- .long sys_llistxattr /* 230 */
+ .long sys_llistxattr /* 230 */
.long sys_flistxattr
.long sys_removexattr
.long sys_lremovexattr
.long sys_fremovexattr
- .long sys_futex /* 235 */
+ .long sys_futex /* 235 */
.long sys_sendfile64
- .long sys_ni_syscall /* sys_mincore */
- .long sys_ni_syscall /* sys_madvise */
+ .long sys_mincore
+ .long sys_madvise
.long sys_fcntl64
- .long sys_readahead /* 240 */
+ .long sys_readahead /* 240 */
.long sys_io_setup
.long sys_io_destroy
.long sys_io_getevents
.long sys_io_submit
- .long sys_io_cancel /* 245 */
+ .long sys_io_cancel /* 245 */
.long sys_fadvise64
.long sys_exit_group
.long sys_lookup_dcookie
.long sys_epoll_create
- .long sys_epoll_ctl /* 250 */
+ .long sys_epoll_ctl /* 250 */
.long sys_epoll_wait
- .long sys_ni_syscall /* sys_remap_file_pages */
+ .long sys_remap_file_pages
.long sys_set_tid_address
.long sys_timer_create
- .long sys_timer_settime /* 255 */
+ .long sys_timer_settime /* 255 */
.long sys_timer_gettime
.long sys_timer_getoverrun
.long sys_timer_delete
.long sys_clock_settime
- .long sys_clock_gettime /* 260 */
+ .long sys_clock_gettime /* 260 */
.long sys_clock_getres
.long sys_clock_nanosleep
.long sys_statfs64
.long sys_fstatfs64
- .long sys_tgkill /* 265 */
+ .long sys_tgkill /* 265 */
.long sys_utimes
.long sys_fadvise64_64
- .long sys_mbind
+ .long sys_mbind
.long sys_get_mempolicy
- .long sys_set_mempolicy /* 270 */
+ .long sys_set_mempolicy /* 270 */
.long sys_mq_open
.long sys_mq_unlink
.long sys_mq_timedsend
.long sys_mq_timedreceive
- .long sys_mq_notify /* 275 */
+ .long sys_mq_notify /* 275 */
.long sys_mq_getsetattr
.long sys_waitid
- .long sys_ni_syscall /* for sys_vserver */
+ .long sys_ni_syscall /* for sys_vserver */
.long sys_add_key
- .long sys_request_key /* 280 */
+ .long sys_request_key /* 280 */
.long sys_keyctl
.long sys_ioprio_set
.long sys_ioprio_get
@@ -319,8 +322,8 @@
.long sys_readlinkat
.long sys_fchmodat
.long sys_faccessat /* 300 */
- .long sys_ni_syscall /* Reserved for pselect6 */
- .long sys_ni_syscall /* Reserved for ppoll */
+ .long sys_pselect6
+ .long sys_ppoll
.long sys_unshare
.long sys_set_robust_list
.long sys_get_robust_list /* 305 */
@@ -363,7 +366,3 @@
.long sys_clock_adjtime
.long sys_syncfs
- .rept NR_syscalls-(.-sys_call_table)/4
- .long sys_ni_syscall
- .endr
-
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 878be5f..d099359 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -25,6 +25,8 @@
EXCEPTION_TABLE(16)
+ _sdata = .; /* Start of data section */
+
RODATA
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 1ad6b7a..8080469 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -25,6 +25,7 @@
_etext = .; /* End of text section */
EXCEPTION_TABLE(16) :data
+ _sdata = .; /* Start of rw data section */
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) :data
/* End of data goes *here* so that freeing init code works properly. */
_edata = .;
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index d8a214f..e5550ce 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -217,16 +217,12 @@
.rating = 300,
.read = microblaze_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 8, /* I can shift it */
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init microblaze_clocksource_init(void)
{
- clocksource_microblaze.mult =
- clocksource_hz2mult(timer_clock_freq,
- clocksource_microblaze.shift);
- if (clocksource_register(&clocksource_microblaze))
+ if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
panic("failed to register clocksource");
/* stop timer1 */
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 7ff9b54..aef6c91 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@
platforms += emma
platforms += jazz
platforms += jz4740
+platforms += lantiq
platforms += lasat
platforms += loongson
platforms += mipssim
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8e256cc..cef1a85 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -212,6 +212,24 @@
select HAVE_PWM
select HAVE_CLK
+config LANTIQ
+ bool "Lantiq based platforms"
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_HAS_EARLY_PRINTK
+ select ARCH_REQUIRE_GPIOLIB
+ select SWAP_IO_SPACE
+ select BOOT_RAW
+ select HAVE_CLK
+ select MIPS_MACHINE
+
config LASAT
bool "LASAT Networks platforms"
select CEVT_R4K
@@ -736,6 +754,33 @@
Hikari
Say Y here for most Octeon reference boards.
+config NLM_XLR_BOARD
+ bool "Netlogic XLR/XLS based systems"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select NLM_COMMON
+ select NLM_XLR
+ select SYS_HAS_CPU_XLR
+ select SYS_SUPPORTS_SMP
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select 64BIT_PHYS_ADDR
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_32
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select ZONE_DMA if 64BIT
+ select SYNC_R4K
+ select SYS_HAS_EARLY_PRINTK
+ help
+ Support for systems based on Netlogic XLR and XLS processors.
+ Say Y here if you have a XLR or XLS based board.
+
endchoice
source "arch/mips/alchemy/Kconfig"
@@ -743,6 +788,7 @@
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
+source "arch/mips/lantiq/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/powertv/Kconfig"
@@ -752,6 +798,7 @@
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig"
+source "arch/mips/netlogic/Kconfig"
endmenu
@@ -997,9 +1044,6 @@
config IRQ_GIC
bool
-config IRQ_CPU_OCTEON
- bool
-
config MIPS_BOARDS_GEN
bool
@@ -1359,8 +1403,6 @@
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
- select IRQ_CPU
- select IRQ_CPU_OCTEON
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP
@@ -1425,6 +1467,17 @@
help
Broadcom BMIPS5000 processors.
+config CPU_XLR
+ bool "Netlogic XLR SoC"
+ depends on SYS_HAS_CPU_XLR
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select WEAK_ORDERING
+ select WEAK_REORDERING_BEYOND_LLSC
+ select CPU_SUPPORTS_HUGEPAGES
+ help
+ Netlogic Microsystems XLR/XLS processors.
endchoice
if CPU_LOONGSON2F
@@ -1555,6 +1608,9 @@
config SYS_HAS_CPU_BMIPS5000
bool
+config SYS_HAS_CPU_XLR
+ bool
+
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -2339,6 +2395,7 @@
config I8253
bool
+ select CLKSRC_I8253
select MIPS_EXTERNAL_TIMER
config ZONE_DMA32
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 53e3514..884819c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -191,6 +191,18 @@
#
include $(srctree)/arch/mips/Kbuild.platforms
+#
+# NETLOGIC SOC Common (common)
+#
+cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic
+cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
+
+#
+# NETLOGIC XLR/XLS SoC, Simulator and boards
+#
+core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/
+load-$(CONFIG_NLM_XLR_BOARD) += 0xffffffff84000000
+
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index ca0506a..3a5abb5 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -36,7 +36,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -58,7 +58,8 @@
/* I couldn't find a macro that did this... */
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
-static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static dbdma_global_t *dbdma_gptr =
+ (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
static int dbdma_initialized;
static dbdev_tab_t dbdev_tab[] = {
@@ -299,7 +300,7 @@
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
ctp->chan_index = chan = i;
- dcp = DDMA_CHANNEL_BASE;
+ dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
cp = (au1x_dma_chan_t *)dcp;
@@ -958,105 +959,75 @@
}
-struct alchemy_dbdma_sysdev {
- struct sys_device sysdev;
- u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
-};
+static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
-static int alchemy_dbdma_suspend(struct sys_device *dev,
- pm_message_t state)
+static int alchemy_dbdma_suspend(void)
{
- struct alchemy_dbdma_sysdev *sdev =
- container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
int i;
- u32 addr;
+ void __iomem *addr;
- addr = DDMA_GLOBAL_BASE;
- sdev->pm_regs[0][0] = au_readl(addr + 0x00);
- sdev->pm_regs[0][1] = au_readl(addr + 0x04);
- sdev->pm_regs[0][2] = au_readl(addr + 0x08);
- sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+ alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
+ alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
+ alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
+ alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
/* save channel configurations */
- for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
- sdev->pm_regs[i][0] = au_readl(addr + 0x00);
- sdev->pm_regs[i][1] = au_readl(addr + 0x04);
- sdev->pm_regs[i][2] = au_readl(addr + 0x08);
- sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
- sdev->pm_regs[i][4] = au_readl(addr + 0x10);
- sdev->pm_regs[i][5] = au_readl(addr + 0x14);
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+ for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+ alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
+ alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
+ alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
+ alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
+ alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
+ alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
/* halt channel */
- au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
- au_sync();
- while (!(au_readl(addr + 0x14) & 1))
- au_sync();
+ __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
+ wmb();
+ while (!(__raw_readl(addr + 0x14) & 1))
+ wmb();
addr += 0x100; /* next channel base */
}
/* disable channel interrupts */
- au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
- au_sync();
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+ __raw_writel(0, addr + 0x0c);
+ wmb();
return 0;
}
-static int alchemy_dbdma_resume(struct sys_device *dev)
+static void alchemy_dbdma_resume(void)
{
- struct alchemy_dbdma_sysdev *sdev =
- container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
int i;
- u32 addr;
+ void __iomem *addr;
- addr = DDMA_GLOBAL_BASE;
- au_writel(sdev->pm_regs[0][0], addr + 0x00);
- au_writel(sdev->pm_regs[0][1], addr + 0x04);
- au_writel(sdev->pm_regs[0][2], addr + 0x08);
- au_writel(sdev->pm_regs[0][3], addr + 0x0c);
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+ __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
+ __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
+ __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
+ __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
/* restore channel configurations */
- for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
- au_writel(sdev->pm_regs[i][0], addr + 0x00);
- au_writel(sdev->pm_regs[i][1], addr + 0x04);
- au_writel(sdev->pm_regs[i][2], addr + 0x08);
- au_writel(sdev->pm_regs[i][3], addr + 0x0c);
- au_writel(sdev->pm_regs[i][4], addr + 0x10);
- au_writel(sdev->pm_regs[i][5], addr + 0x14);
- au_sync();
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+ for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+ __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
+ __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
+ __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
+ __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
+ __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
+ __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
+ wmb();
addr += 0x100; /* next channel base */
}
-
- return 0;
}
-static struct sysdev_class alchemy_dbdma_sysdev_class = {
- .name = "dbdma",
+static struct syscore_ops alchemy_dbdma_syscore_ops = {
.suspend = alchemy_dbdma_suspend,
.resume = alchemy_dbdma_resume,
};
-static int __init alchemy_dbdma_sysdev_init(void)
-{
- struct alchemy_dbdma_sysdev *sdev;
- int ret;
-
- ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
- if (ret)
- return ret;
-
- sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
- if (!sdev)
- return -ENOMEM;
-
- sdev->sysdev.id = -1;
- sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
- ret = sysdev_register(&sdev->sysdev);
- if (ret)
- kfree(sdev);
-
- return ret;
-}
-
static int __init au1xxx_dbdma_init(void)
{
int irq_nr, ret;
@@ -1084,11 +1055,7 @@
else {
dbdma_initialized = 1;
printk(KERN_INFO "Alchemy DBDMA initialized\n");
- ret = alchemy_dbdma_sysdev_init();
- if (ret) {
- printk(KERN_ERR "DBDMA PM init failed\n");
- ret = 0;
- }
+ register_syscore_ops(&alchemy_dbdma_syscore_ops);
}
return ret;
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index d527887..347980e 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -58,6 +58,9 @@
* returned from request_dma.
*/
+/* DMA Channel register block spacing */
+#define DMA_CHANNEL_LEN 0x00000100
+
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -77,22 +80,23 @@
unsigned int fifo_addr;
unsigned int dma_mode;
} dma_dev_table[DMA_NUM_DEV] = {
- {UART0_ADDR + UART_TX, 0},
- {UART0_ADDR + UART_RX, 0},
- {0, 0},
- {0, 0},
- {AC97C_DATA, DMA_DW16 }, /* coherent */
- {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
- {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
- {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
- {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
- {USBD_EP0WR, DMA_DW8 | DMA_NC},
- {USBD_EP2WR, DMA_DW8 | DMA_NC},
- {USBD_EP3WR, DMA_DW8 | DMA_NC},
- {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC},
- {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC},
- {I2S_DATA, DMA_DW32 | DMA_NC},
- {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
+ { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */
+ { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */
+ { 0, 0 }, /* DMA_REQ0 */
+ { 0, 0 }, /* DMA_REQ1 */
+ { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */
+ { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */
+ { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */
+ { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
+ { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+ { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+ { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+ { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+ { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+ { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+ /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
+ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */
+ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
};
int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
@@ -123,10 +127,10 @@
/* Device FIFO addresses and default DMA modes - 2nd bank */
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
- { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
- { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */
- { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
- { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */
+ { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */
+ { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */
+ { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */
+ { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */
};
void dump_au1000_dma_channel(unsigned int dmanr)
@@ -202,7 +206,7 @@
}
/* fill it in */
- chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
+ chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
chan->fifo_addr = dev->fifo_addr;
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 55dd7c8..8b60ba0 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -30,7 +30,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
@@ -39,6 +39,36 @@
#include <asm/mach-pb1x00/pb1000.h>
#endif
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD 0x40
+#define IC_CFG0SET 0x40
+#define IC_CFG0CLR 0x44
+#define IC_CFG1RD 0x48
+#define IC_CFG1SET 0x48
+#define IC_CFG1CLR 0x4C
+#define IC_CFG2RD 0x50
+#define IC_CFG2SET 0x50
+#define IC_CFG2CLR 0x54
+#define IC_REQ0INT 0x54
+#define IC_SRCRD 0x58
+#define IC_SRCSET 0x58
+#define IC_SRCCLR 0x5C
+#define IC_REQ1INT 0x5C
+#define IC_ASSIGNRD 0x60
+#define IC_ASSIGNSET 0x60
+#define IC_ASSIGNCLR 0x64
+#define IC_WAKERD 0x68
+#define IC_WAKESET 0x68
+#define IC_WAKECLR 0x6C
+#define IC_MASKRD 0x70
+#define IC_MASKSET 0x70
+#define IC_MASKCLR 0x74
+#define IC_RISINGRD 0x78
+#define IC_RISINGCLR 0x78
+#define IC_FALLINGRD 0x7C
+#define IC_FALLINGCLR 0x7C
+#define IC_TESTBIT 0x80
+
static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
/* NOTE on interrupt priorities: The original writers of this code said:
@@ -221,89 +251,101 @@
static void au1x_ic0_unmask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
- au_writel(1 << bit, IC0_MASKSET);
- au_writel(1 << bit, IC0_WAKESET);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKSET);
+ __raw_writel(1 << bit, base + IC_WAKESET);
+ wmb();
}
static void au1x_ic1_unmask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
- au_writel(1 << bit, IC1_MASKSET);
- au_writel(1 << bit, IC1_WAKESET);
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKSET);
+ __raw_writel(1 << bit, base + IC_WAKESET);
/* very hacky. does the pb1000 cpld auto-disable this int?
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
if (d->irq == AU1000_GPIO15_INT)
- au_writel(0x4000, PB1000_MDR); /* enable int */
+ __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
#endif
- au_sync();
+ wmb();
}
static void au1x_ic0_mask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_WAKECLR);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ wmb();
}
static void au1x_ic1_mask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
- au_writel(1 << bit, IC1_MASKCLR);
- au_writel(1 << bit, IC1_WAKECLR);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ wmb();
}
static void au1x_ic0_ack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ wmb();
}
static void au1x_ic1_ack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- au_writel(1 << bit, IC1_FALLINGCLR);
- au_writel(1 << bit, IC1_RISINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ wmb();
}
static void au1x_ic0_maskack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
- au_writel(1 << bit, IC0_WAKECLR);
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ wmb();
}
static void au1x_ic1_maskack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
- au_writel(1 << bit, IC1_WAKECLR);
- au_writel(1 << bit, IC1_MASKCLR);
- au_writel(1 << bit, IC1_RISINGCLR);
- au_writel(1 << bit, IC1_FALLINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ wmb();
}
static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
@@ -318,13 +360,13 @@
return -EINVAL;
local_irq_save(flags);
- wakemsk = au_readl(SYS_WAKEMSK);
+ wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK);
if (on)
wakemsk |= 1 << bit;
else
wakemsk &= ~(1 << bit);
- au_writel(wakemsk, SYS_WAKEMSK);
- au_sync();
+ __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK);
+ wmb();
local_irq_restore(flags);
return 0;
@@ -356,81 +398,74 @@
static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
{
struct irq_chip *chip;
- unsigned long icr[6];
- unsigned int bit, ic, irq = d->irq;
+ unsigned int bit, irq = d->irq;
irq_flow_handler_t handler = NULL;
unsigned char *name = NULL;
+ void __iomem *base;
int ret;
if (irq >= AU1000_INTC1_INT_BASE) {
bit = irq - AU1000_INTC1_INT_BASE;
chip = &au1x_ic1_chip;
- ic = 1;
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
} else {
bit = irq - AU1000_INTC0_INT_BASE;
chip = &au1x_ic0_chip;
- ic = 0;
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
}
if (bit > 31)
return -EINVAL;
- icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
- icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
- icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
- icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
- icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
- icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
-
ret = 0;
switch (flow_type) { /* cfgregs 2:1:0 */
case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_edge_irq;
name = "riseedge";
break;
case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
handler = handle_edge_irq;
name = "falledge";
break;
case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_edge_irq;
name = "bothedge";
break;
case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
- au_writel(1 << bit, icr[2]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2SET);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_level_irq;
name = "hilevel";
break;
case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
- au_writel(1 << bit, icr[2]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2SET);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
handler = handle_level_irq;
name = "lowlevel";
break;
case IRQ_TYPE_NONE: /* 0:0:0 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
break;
default:
ret = -EINVAL;
}
__irq_set_chip_handler_name_locked(d->irq, chip, handler, name);
- au_sync();
+ wmb();
return ret;
}
@@ -444,21 +479,21 @@
off = MIPS_CPU_IRQ_BASE + 7;
goto handle;
} else if (pending & CAUSEF_IP2) {
- s = IC0_REQ0INT;
+ s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP3) {
- s = IC0_REQ1INT;
+ s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP4) {
- s = IC1_REQ0INT;
+ s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
off = AU1000_INTC1_INT_BASE;
} else if (pending & CAUSEF_IP5) {
- s = IC1_REQ1INT;
+ s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
off = AU1000_INTC1_INT_BASE;
} else
goto spurious;
- s = au_readl(s);
+ s = __raw_readl((void __iomem *)s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
@@ -469,48 +504,42 @@
do_IRQ(off);
}
+
+static inline void ic_init(void __iomem *base)
+{
+ /* initialize interrupt controller to a safe state */
+ __raw_writel(0xffffffff, base + IC_CFG0CLR);
+ __raw_writel(0xffffffff, base + IC_CFG1CLR);
+ __raw_writel(0xffffffff, base + IC_CFG2CLR);
+ __raw_writel(0xffffffff, base + IC_MASKCLR);
+ __raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+ __raw_writel(0xffffffff, base + IC_WAKECLR);
+ __raw_writel(0xffffffff, base + IC_SRCSET);
+ __raw_writel(0xffffffff, base + IC_FALLINGCLR);
+ __raw_writel(0xffffffff, base + IC_RISINGCLR);
+ __raw_writel(0x00000000, base + IC_TESTBIT);
+ wmb();
+}
+
static void __init au1000_init_irq(struct au1xxx_irqmap *map)
{
unsigned int bit, irq_nr;
- int i;
+ void __iomem *base;
- /*
- * Initialize interrupt controllers to a safe state.
- */
- au_writel(0xffffffff, IC0_CFG0CLR);
- au_writel(0xffffffff, IC0_CFG1CLR);
- au_writel(0xffffffff, IC0_CFG2CLR);
- au_writel(0xffffffff, IC0_MASKCLR);
- au_writel(0xffffffff, IC0_ASSIGNCLR);
- au_writel(0xffffffff, IC0_WAKECLR);
- au_writel(0xffffffff, IC0_SRCSET);
- au_writel(0xffffffff, IC0_FALLINGCLR);
- au_writel(0xffffffff, IC0_RISINGCLR);
- au_writel(0x00000000, IC0_TESTBIT);
-
- au_writel(0xffffffff, IC1_CFG0CLR);
- au_writel(0xffffffff, IC1_CFG1CLR);
- au_writel(0xffffffff, IC1_CFG2CLR);
- au_writel(0xffffffff, IC1_MASKCLR);
- au_writel(0xffffffff, IC1_ASSIGNCLR);
- au_writel(0xffffffff, IC1_WAKECLR);
- au_writel(0xffffffff, IC1_SRCSET);
- au_writel(0xffffffff, IC1_FALLINGCLR);
- au_writel(0xffffffff, IC1_RISINGCLR);
- au_writel(0x00000000, IC1_TESTBIT);
-
+ ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+ ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
mips_cpu_irq_init();
/* register all 64 possible IC0+IC1 irq sources as type "none".
* Use set_irq_type() to set edge/level behaviour at runtime.
*/
- for (i = AU1000_INTC0_INT_BASE;
- (i < AU1000_INTC0_INT_BASE + 32); i++)
- au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+ for (irq_nr = AU1000_INTC0_INT_BASE;
+ (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+ au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
- for (i = AU1000_INTC1_INT_BASE;
- (i < AU1000_INTC1_INT_BASE + 32); i++)
- au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+ for (irq_nr = AU1000_INTC1_INT_BASE;
+ (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+ au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
/*
* Initialize IC0, which is fixed per processor.
@@ -520,13 +549,13 @@
if (irq_nr >= AU1000_INTC1_INT_BASE) {
bit = irq_nr - AU1000_INTC1_INT_BASE;
- if (map->im_request)
- au_writel(1 << bit, IC1_ASSIGNSET);
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
} else {
bit = irq_nr - AU1000_INTC0_INT_BASE;
- if (map->im_request)
- au_writel(1 << bit, IC0_ASSIGNSET);
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
}
+ if (map->im_request)
+ __raw_writel(1 << bit, base + IC_ASSIGNSET);
au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
++map;
@@ -556,90 +585,62 @@
}
}
-struct alchemy_ic_sysdev {
- struct sys_device sysdev;
- void __iomem *base;
- unsigned long pmdata[7];
-};
-static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
+static unsigned long alchemy_ic_pmdata[7 * 2];
+
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
{
- struct alchemy_ic_sysdev *icdev =
- container_of(dev, struct alchemy_ic_sysdev, sysdev);
+ d[0] = __raw_readl(base + IC_CFG0RD);
+ d[1] = __raw_readl(base + IC_CFG1RD);
+ d[2] = __raw_readl(base + IC_CFG2RD);
+ d[3] = __raw_readl(base + IC_SRCRD);
+ d[4] = __raw_readl(base + IC_ASSIGNRD);
+ d[5] = __raw_readl(base + IC_WAKERD);
+ d[6] = __raw_readl(base + IC_MASKRD);
+ ic_init(base); /* shut it up too while at it */
+}
- icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
- icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
- icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
- icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
- icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
- icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
- icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
+{
+ ic_init(base);
+ __raw_writel(d[0], base + IC_CFG0SET);
+ __raw_writel(d[1], base + IC_CFG1SET);
+ __raw_writel(d[2], base + IC_CFG2SET);
+ __raw_writel(d[3], base + IC_SRCSET);
+ __raw_writel(d[4], base + IC_ASSIGNSET);
+ __raw_writel(d[5], base + IC_WAKESET);
+ wmb();
+
+ __raw_writel(d[6], base + IC_MASKSET);
+ wmb();
+}
+
+static int alchemy_ic_suspend(void)
+{
+ alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+ alchemy_ic_pmdata);
+ alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+ &alchemy_ic_pmdata[7]);
return 0;
}
-static int alchemy_ic_resume(struct sys_device *dev)
+static void alchemy_ic_resume(void)
{
- struct alchemy_ic_sysdev *icdev =
- container_of(dev, struct alchemy_ic_sysdev, sysdev);
-
- __raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
- __raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
- __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
- __raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
- __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
- __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
- __raw_writel(0x00000000, icdev->base + IC_TESTBIT);
- wmb();
- __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
- __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
- __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
- __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
- __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
- __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
- wmb();
-
- __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
- wmb();
-
- return 0;
+ alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+ &alchemy_ic_pmdata[7]);
+ alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+ alchemy_ic_pmdata);
}
-static struct sysdev_class alchemy_ic_sysdev_class = {
- .name = "ic",
+static struct syscore_ops alchemy_ic_syscore_ops = {
.suspend = alchemy_ic_suspend,
.resume = alchemy_ic_resume,
};
-static int __init alchemy_ic_sysdev_init(void)
+static int __init alchemy_ic_pm_init(void)
{
- struct alchemy_ic_sysdev *icdev;
- unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
- int err, i;
-
- err = sysdev_class_register(&alchemy_ic_sysdev_class);
- if (err)
- return err;
-
- for (i = 0; i < 2; i++) {
- icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
- if (!icdev)
- return -ENOMEM;
-
- icdev->base = ioremap(icbase[i], 0x1000);
-
- icdev->sysdev.id = i;
- icdev->sysdev.cls = &alchemy_ic_sysdev_class;
- err = sysdev_register(&icdev->sysdev);
- if (err) {
- kfree(icdev);
- return err;
- }
- }
-
+ register_syscore_ops(&alchemy_ic_syscore_ops);
return 0;
}
-device_initcall(alchemy_ic_sysdev_init);
+device_initcall(alchemy_ic_pm_init);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 9e7814d..3b2c18b 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -13,9 +13,10 @@
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
-#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -30,21 +31,12 @@
#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
- if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
- /* power-on sequence as suggested in the databooks */
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
- __raw_writel(1, port->membase + UART_MOD_CNTRL);
- wmb();
- }
- __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
- wmb();
+ alchemy_uart_enable(CPHYSADDR(port->membase));
serial8250_do_pm(port, state, old_state);
break;
case 3: /* power off */
serial8250_do_pm(port, state, old_state);
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
+ alchemy_uart_disable(CPHYSADDR(port->membase));
break;
default:
serial8250_do_pm(port, state, old_state);
@@ -65,38 +57,60 @@
.pm = alchemy_8250_pm, \
}
-static struct plat_serial8250_port au1x00_uart_data[] = {
-#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
- PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
- PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
- PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
-#endif
- { },
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1200] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+ },
};
static struct platform_device au1xx0_uart_device = {
.name = "serial8250",
.id = PLAT8250_DEV_AU1X00,
- .dev = {
- .platform_data = au1x00_uart_data,
- },
};
+static void __init alchemy_setup_uarts(int ctype)
+{
+ unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+ int s = sizeof(struct plat_serial8250_port);
+ int c = alchemy_get_uarts(ctype);
+ struct plat_serial8250_port *ports;
+
+ ports = kzalloc(s * (c + 1), GFP_KERNEL);
+ if (!ports) {
+ printk(KERN_INFO "Alchemy: no memory for UART data\n");
+ return;
+ }
+ memcpy(ports, au1x00_uart_data[ctype], s * c);
+ au1xx0_uart_device.dev.platform_data = ports;
+
+ /* Fill up uartclk. */
+ for (s = 0; s < c; s++)
+ ports[s].uartclk = uartclk;
+ if (platform_device_register(&au1xx0_uart_device))
+ printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
@@ -269,8 +283,8 @@
static struct resource au1200_mmc0_resources[] = {
[0] = {
- .start = SD0_PHYS_ADDR,
- .end = SD0_PHYS_ADDR + 0x7ffff,
+ .start = AU1100_SD0_PHYS_ADDR,
+ .end = AU1100_SD0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -305,8 +319,8 @@
#ifndef CONFIG_MIPS_DB1200
static struct resource au1200_mmc1_resources[] = {
[0] = {
- .start = SD1_PHYS_ADDR,
- .end = SD1_PHYS_ADDR + 0x7ffff,
+ .start = AU1100_SD1_PHYS_ADDR,
+ .end = AU1100_SD1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -359,15 +373,16 @@
#endif
/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */
#define MAC_RES(_base, _enable, _irq) \
{ \
- .start = CPHYSADDR(_base), \
- .end = CPHYSADDR(_base + 0xffff), \
+ .start = _base, \
+ .end = _base + 0xffff, \
.flags = IORESOURCE_MEM, \
}, \
{ \
- .start = CPHYSADDR(_enable), \
- .end = CPHYSADDR(_enable + 0x3), \
+ .start = _enable, \
+ .end = _enable + 0x3, \
.flags = IORESOURCE_MEM, \
}, \
{ \
@@ -376,19 +391,29 @@
.flags = IORESOURCE_IRQ \
}
-static struct resource au1xxx_eth0_resources[] = {
-#if defined(CONFIG_SOC_AU1000)
- MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1100)
- MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1550)
- MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1500)
- MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
-#endif
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1000_MAC0_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ MAC_RES(AU1500_MAC0_PHYS_ADDR,
+ AU1500_MACEN_PHYS_ADDR,
+ AU1500_MAC0_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1100_MAC0_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1550_MAC0_DMA_INT)
+ },
};
-
static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
.phy1_search_mac0 = 1,
};
@@ -396,20 +421,26 @@
static struct platform_device au1xxx_eth0_device = {
.name = "au1000-eth",
.id = 0,
- .num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
- .resource = au1xxx_eth0_resources,
+ .num_resources = MAC_RES_COUNT,
.dev.platform_data = &au1xxx_eth0_platform_data,
};
-#ifndef CONFIG_SOC_AU1100
-static struct resource au1xxx_eth1_resources[] = {
-#if defined(CONFIG_SOC_AU1000)
- MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
-#elif defined(CONFIG_SOC_AU1550)
- MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
-#elif defined(CONFIG_SOC_AU1500)
- MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
-#endif
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ MAC_RES(AU1000_MAC1_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR + 4,
+ AU1000_MAC1_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ MAC_RES(AU1500_MAC1_PHYS_ADDR,
+ AU1500_MACEN_PHYS_ADDR + 4,
+ AU1500_MAC1_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ MAC_RES(AU1000_MAC1_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR + 4,
+ AU1550_MAC1_DMA_INT)
+ },
};
static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
@@ -419,11 +450,9 @@
static struct platform_device au1xxx_eth1_device = {
.name = "au1000-eth",
.id = 1,
- .num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
- .resource = au1xxx_eth1_resources,
+ .num_resources = MAC_RES_COUNT,
.dev.platform_data = &au1xxx_eth1_platform_data,
};
-#endif
void __init au1xxx_override_eth_cfg(unsigned int port,
struct au1000_eth_platform_data *eth_data)
@@ -434,15 +463,65 @@
if (port == 0)
memcpy(&au1xxx_eth0_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
-#ifndef CONFIG_SOC_AU1100
else
memcpy(&au1xxx_eth1_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
-#endif
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+ int ret, i;
+ unsigned char ethaddr[6];
+ struct resource *macres;
+
+ /* Handle 1st MAC */
+ if (alchemy_get_macs(ctype) < 1)
+ return;
+
+ macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ if (!macres) {
+ printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+ return;
+ }
+ memcpy(macres, au1xxx_eth0_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT);
+ au1xxx_eth0_device.resource = macres;
+
+ i = prom_get_ethernet_addr(ethaddr);
+ if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+ memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+ ret = platform_device_register(&au1xxx_eth0_device);
+ if (!ret)
+ printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+ /* Handle 2nd MAC */
+ if (alchemy_get_macs(ctype) < 2)
+ return;
+
+ macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ if (!macres) {
+ printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+ return;
+ }
+ memcpy(macres, au1xxx_eth1_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT);
+ au1xxx_eth1_device.resource = macres;
+
+ ethaddr[5] += 1; /* next addr for 2nd MAC */
+ if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+ memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+ /* Register second MAC if enabled in pinfunc */
+ if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
+ ret = platform_device_register(&au1xxx_eth1_device);
+ if (ret)
+ printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+ }
}
static struct platform_device *au1xxx_platform_devices[] __initdata = {
- &au1xx0_uart_device,
&au1xxx_usb_ohci_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
@@ -460,36 +539,17 @@
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
- &au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
{
- unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int err, i;
- unsigned char ethaddr[6];
+ int err, ctype = alchemy_get_cputype();
- /* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags; i++)
- au1x00_uart_data[i].uartclk = uartclk;
-
- /* use firmware-provided mac addr if available and necessary */
- i = prom_get_ethernet_addr(ethaddr);
- if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
- memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+ alchemy_setup_uarts(ctype);
+ alchemy_setup_macs(ctype);
err = platform_add_devices(au1xxx_platform_devices,
ARRAY_SIZE(au1xxx_platform_devices));
-#ifndef CONFIG_SOC_AU1100
- ethaddr[5] += 1; /* next addr for 2nd MAC */
- if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
- memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
-
- /* Register second MAC if enabled in pinfunc */
- if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
- err = platform_device_register(&au1xxx_eth1_device);
-#endif
-
return err;
}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 561e5da..1b887c8 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -52,8 +52,6 @@
/* this is faster than wasting cycles trying to approximate it */
preset_lpj = (est_freq >> 1) / HZ;
- board_setup(); /* board specific setup */
-
if (au1xxx_cpu_needs_config_od())
/* Various early Au1xx0 errata corrected by this */
set_c0_config(1 << 19); /* Set Config[OD] */
@@ -61,6 +59,8 @@
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
+ board_setup(); /* board specific setup */
+
/* IO/MEM resources. */
set_io_port_base(0);
ioport_resource.start = IOPORT_RESOURCE_START;
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 2aecb2f..d5da6ad 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -141,8 +141,7 @@
goto cntr_err;
/* register counter1 clocksource and event device */
- clocksource_set_clock(&au1x_counter1_clocksource, 32768);
- clocksource_register(&au1x_counter1_clocksource);
+ clocksource_register_hz(&au1x_counter1_clocksource, 32768);
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index 4a89800..1dac4f2 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -23,6 +23,13 @@
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
+ /* Set Config[OD] (disable overlapping bus transaction):
+ * This gets rid of a _lot_ of spurious interrupts (especially
+ * wrt. IDE); but incurs ~10% performance hit in some
+ * cpu-bound applications.
+ */
+ set_c0_config(1 << 19);
+
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 05f120f..5c956fe 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -127,13 +127,10 @@
void __init board_setup(void)
{
unsigned long bcsr1, bcsr2;
- u32 pin_func;
bcsr1 = DB1000_BCSR_PHYS_ADDR;
bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
- pin_func = 0;
-
#ifdef CONFIG_MIPS_DB1000
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
@@ -164,12 +161,16 @@
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* Set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
- au_writel(pin_func, SYS_PINFUNC);
- /* Power off until the driver is in use */
- bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
- BCSR_RESETS_IRDA_MODE_OFF);
+ {
+ u32 pin_func;
+
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+ au_writel(pin_func, SYS_PINFUNC);
+ /* Power off until the driver is in use */
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+ BCSR_RESETS_IRDA_MODE_OFF);
+ }
#endif
bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
@@ -177,31 +178,35 @@
alchemy_gpio1_input_enable();
#ifdef CONFIG_MIPS_MIRAGE
- /* GPIO[20] is output */
- alchemy_gpio_direction_output(20, 0);
+ {
+ u32 pin_func;
- /* Set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
+ /* GPIO[20] is output */
+ alchemy_gpio_direction_output(20, 0);
- /* Set GPIO[215:211] for LEDs */
- pin_func |= 5 << 2;
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* Set GPIO[214:213] for more LEDs */
- pin_func |= 5 << 12;
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* Set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= SYS_PF_LCD | SYS_PF_PC;
- au_writel(pin_func, SYS_PINFUNC);
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /*
- * Enable speaker amplifier. This should
- * be part of the audio driver.
- */
- alchemy_gpio_direction_output(209, 1);
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
+ au_writel(pin_func, SYS_PINFUNC);
- pm_power_off = mirage_power_off;
- _machine_halt = mirage_power_off;
- _machine_restart = (void(*)(char *))mips_softreset;
+ /*
+ * Enable speaker amplifier. This should
+ * be part of the audio driver.
+ */
+ alchemy_gpio_direction_output(209, 1);
+
+ pm_power_off = mirage_power_off;
+ _machine_halt = mirage_power_off;
+ _machine_restart = (void(*)(char *))mips_softreset;
+ }
#endif
#ifdef CONFIG_MIPS_BOSPORUS
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 2d85c4b..e64fdcb 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -65,7 +65,7 @@
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
+ alchemy_gpio1_input_enable();
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 83f4621..3b4fa32 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -56,7 +56,7 @@
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
+ alchemy_gpio1_input_enable();
udelay(100);
/* GPIO201 is input for PCMCIA card detect */
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index baeb213..e5306b5 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -62,5 +62,5 @@
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index ad2e3f1..5f8f069 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,9 +36,6 @@
#include <prom.h>
-#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR)
-#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR)
-
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
};
@@ -67,18 +64,15 @@
void __init board_setup(void)
{
- printk(KERN_INFO "Tarpeze ITS GPR board\n");
+ printk(KERN_INFO "Trapeze ITS GPR board\n");
pm_power_off = gpr_power_off;
_machine_halt = gpr_power_off;
_machine_restart = gpr_reset;
- /* Enable UART3 */
- au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
- au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
- /* Enable UART1 */
- au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
- au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+ /* Enable UART1/3 */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
/* Take away Reset of UMTS-card */
alchemy_gpio_direction_output(215, 1);
diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c
index f044f4c54..229aafa 100644
--- a/arch/mips/alchemy/gpr/init.c
+++ b/arch/mips/alchemy/gpr/init.c
@@ -59,5 +59,5 @@
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index cf436ab..3ae984c 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -87,7 +87,7 @@
au_writel(SYS_PF_NI2, SYS_PINFUNC);
/* Initialize GPIO */
- au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index f8d2557..2e81cc7 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -62,5 +62,5 @@
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 956f946..55628e3 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -53,8 +53,8 @@
static struct resource mtx1_wdt_res[] = {
[0] = {
- .start = 15,
- .end = 15,
+ .start = 215,
+ .end = 215,
.name = "mtx1-wdt-gpio",
.flags = IORESOURCE_IRQ,
}
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index febfb0fb..81e57fa 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -66,13 +66,10 @@
au_writel(pin_func, SYS_PINFUNC);
/* Enable UART */
- au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
- mdelay(10);
- au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
- mdelay(10);
-
- /* Enable DTR = USB power up */
- au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ /* Enable DTR (MCR bit 0) = USB power up */
+ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+ wmb();
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 15125c2..0ee02cf 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -51,14 +51,13 @@
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str)
+ if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = 0x04000000;
- else
- strict_strtoul(memsize_str, 0, &memsize);
+
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index 425dfa5..bb571bc 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -325,9 +325,7 @@
size = 0x1f;
}
- gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
- AR7_REGS_GPIO + 0x10);
-
+ gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
if (!gpch->regs) {
printk(KERN_ERR "%s: failed to ioremap regs\n",
gpch->chip.label);
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index e5b6615..54db815 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2005 Broadcom Corporation
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -23,7 +24,7 @@
static char nvram_buf[NVRAM_SPACE];
/* Probe for NVRAM header */
-static void __init early_nvram_init(void)
+static void early_nvram_init(void)
{
struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
struct nvram_header *header;
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index c95f90b..73b529b 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -3,6 +3,7 @@
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
* Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+ * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -57,10 +58,49 @@
}
#define READ_FROM_NVRAM(_outvar, name, buf) \
- if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+ if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
sprom->_outvar = simple_strtoul(buf, NULL, 0);
-static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \
+ if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \
+ nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+static inline int nvram_getprefix(const char *prefix, char *name,
+ char *buf, int len)
+{
+ if (prefix) {
+ char key[100];
+
+ snprintf(key, sizeof(key), "%s%s", prefix, name);
+ return nvram_getenv(key, buf, len);
+ }
+
+ return nvram_getenv(name, buf, len);
+}
+
+static u32 nvram_getu32(const char *name, char *buf, int len)
+{
+ int rv;
+ char key[100];
+ u16 var0, var1;
+
+ snprintf(key, sizeof(key), "%s0", name);
+ rv = nvram_getenv(key, buf, len);
+ /* return 0 here so this looks like unset */
+ if (rv < 0)
+ return 0;
+ var0 = simple_strtoul(buf, NULL, 0);
+
+ snprintf(key, sizeof(key), "%s1", name);
+ rv = nvram_getenv(key, buf, len);
+ if (rv < 0)
+ return 0;
+ var1 = simple_strtoul(buf, NULL, 0);
+ return var1 << 16 | var0;
+}
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
{
char buf[100];
u32 boardflags;
@@ -69,11 +109,12 @@
sprom->revision = 1; /* Fallback: Old hardware does not define this. */
READ_FROM_NVRAM(revision, "sromrev", buf);
- if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 ||
+ nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0)
nvram_parse_macaddr(buf, sprom->il0mac);
- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0)
nvram_parse_macaddr(buf, sprom->et0mac);
- if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0)
nvram_parse_macaddr(buf, sprom->et1mac);
READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
@@ -95,20 +136,36 @@
READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
- READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
- READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
- READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
- READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
- READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
- READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
- READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
- READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
- READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
- READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+ READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf);
+ READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf);
+ READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf);
+ READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf);
+ READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf);
+ READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf);
+ READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf);
+ READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf);
+ READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf);
+ READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf);
READ_FROM_NVRAM(tri2g, "tri2g", buf);
READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
READ_FROM_NVRAM(tri5g, "tri5g", buf);
READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+ READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf);
+ READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf);
+ READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf);
+ READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf);
+ READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf);
+ READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf);
+ READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf);
+ READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf);
+ READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf);
+ READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf);
+ READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf);
+ READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf);
+ READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf);
+ READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf);
+ READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf);
+ READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf);
READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
@@ -120,19 +177,27 @@
READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
- READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
- READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
- READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
- READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
- if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+ sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf));
+ sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf));
+ sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf));
+ sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf));
+
+ READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf);
+ READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf);
+ READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf);
+ READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf);
+ memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24,
+ sizeof(sprom->antenna_gain.ghz5));
+
+ if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) {
boardflags = simple_strtoul(buf, NULL, 0);
if (boardflags) {
sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
}
}
- if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+ if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) {
boardflags = simple_strtoul(buf, NULL, 0);
if (boardflags) {
sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
@@ -141,6 +206,22 @@
}
}
+int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+ char prefix[10];
+
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ bcm47xx_fill_sprom(out, prefix);
+ return 0;
+ } else {
+ printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
+
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
@@ -158,7 +239,7 @@
if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- bcm47xx_fill_sprom(&iv->sprom);
+ bcm47xx_fill_sprom(&iv->sprom, NULL);
if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
@@ -172,6 +253,11 @@
char buf[100];
struct ssb_mipscore *mcore;
+ err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom);
+ if (err)
+ printk(KERN_WARNING "bcm47xx: someone else already registered"
+ " a ssb SPROM callback handler (err %d)\n", err);
+
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 8dba8cf..40b223b 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -643,6 +643,17 @@
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
+
+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+ return 0;
+ } else {
+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
#endif
/*
@@ -793,8 +804,9 @@
if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
- printk(KERN_ERR "failed to register fallback SPROM\n");
+ if (ssb_arch_register_fallback_sprom(
+ &bcm63xx_get_fallback_sprom) < 0)
+ printk(KERN_ERR PFX "failed to register fallback SPROM\n");
}
#endif
}
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
index 88c9d963..9a62436 100644
--- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -16,8 +16,8 @@
int main(int argc, char *argv[])
{
+ unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
struct stat sb;
- uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
if (argc != 3) {
fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n",
diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c
index 1bff22f..eb063e6 100644
--- a/arch/mips/boot/compressed/uart-alchemy.c
+++ b/arch/mips/boot/compressed/uart-alchemy.c
@@ -3,5 +3,5 @@
void putc(char c)
{
/* all current (Jan. 2010) in-kernel boards */
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index caae2285..cad555e 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -1,11 +1,7 @@
-config CAVIUM_OCTEON_SPECIFIC_OPTIONS
- bool "Enable Octeon specific options"
- depends on CPU_CAVIUM_OCTEON
- default "y"
+if CPU_CAVIUM_OCTEON
config CAVIUM_CN63XXP1
bool "Enable CN63XXP1 errata worarounds"
- depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "n"
help
The CN63XXP1 chip requires build time workarounds to
@@ -16,7 +12,6 @@
config CAVIUM_OCTEON_2ND_KERNEL
bool "Build the kernel to be used as a 2nd kernel on the same chip"
- depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "n"
help
This option configures this kernel to be linked at a different
@@ -26,7 +21,6 @@
config CAVIUM_OCTEON_HW_FIX_UNALIGNED
bool "Enable hardware fixups of unaligned loads and stores"
- depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Configure the Octeon hardware to automatically fix unaligned loads
@@ -38,7 +32,6 @@
config CAVIUM_OCTEON_CVMSEG_SIZE
int "Number of L1 cache lines reserved for CVMSEG memory"
- depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
range 0 54
default 1
help
@@ -50,7 +43,6 @@
config CAVIUM_OCTEON_LOCK_L2
bool "Lock often used kernel code in the L2"
- depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Enable locking parts of the kernel into the L2 cache.
@@ -93,7 +85,6 @@
config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_STATIC
- depends on CPU_CAVIUM_OCTEON
config CAVIUM_OCTEON_HELPER
def_bool y
@@ -107,6 +98,8 @@
config SWIOTLB
def_bool y
- depends on CPU_CAVIUM_OCTEON
select IOMMU_HELPER
select NEED_SG_DMA_LENGTH
+
+
+endif # CPU_CAVIUM_OCTEON
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 26bf711..29d56af 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -105,8 +105,7 @@
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
- clocksource_set_clock(&clocksource_mips, octeon_get_clock_rate());
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate());
}
static u64 octeon_udelay_factor;
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 0707fae..2d9028f 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -288,7 +288,6 @@
union octeon_cvmemctl cvmmemctl;
union cvmx_iob_fau_timeout fau_timeout;
union cvmx_pow_nw_tim nm_tim;
- uint64_t cvmctl;
/* Get the current settings for CP0_CVMMEMCTL_REG */
cvmmemctl.u64 = read_c0_cvmmemctl();
@@ -392,12 +391,6 @@
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
- /* Move the performance counter interrupts to IRQ 6 */
- cvmctl = read_c0_cvmctl();
- cvmctl &= ~(7 << 7);
- cvmctl |= 6 << 7;
- write_c0_cvmctl(cvmctl);
-
/* Set a default for the hardware timeouts */
fau_timeout.u64 = 0;
fau_timeout.s.tout_val = 0xfff;
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index ba78b21..8b60642 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -37,13 +37,15 @@
uint64_t action;
/* Load the mailbox register to figure out what we're supposed to do */
- action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
+ action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff;
/* Clear the mailbox to clear the interrupt */
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
+ if (action & SMP_RESCHEDULE_YOURSELF)
+ scheduler_ipi();
/* Check if we've been told to flush the icache */
if (action & SMP_ICACHE_FLUSH)
@@ -200,16 +202,15 @@
if (labi->labi_signature != LABI_SIGNATURE)
panic("The bootloader version on this board is incorrect.");
#endif
-
- cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
+ /*
+ * Only the low order mailbox bits are used for IPIs, leave
+ * the other bits alone.
+ */
+ cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
- "mailbox0", mailbox_interrupt)) {
+ "SMP-IPI", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
- if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
- "mailbox1", mailbox_interrupt)) {
- panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
- }
}
/**
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 167c1d0..b6acd2f 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -86,8 +86,8 @@
CONFIG_NET_EMATCH=y
CONFIG_NET_CLS_ACT=y
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
@@ -329,7 +329,7 @@
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_M66592=y
CONFIG_MMC=m
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_FB_SM7XX=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 7270f31..5527abb 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -374,7 +374,7 @@
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_HID=m
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index a97a42c6..37862b2 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -225,8 +225,8 @@
CONFIG_VLSI_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
new file mode 100644
index 0000000..e4b399f
--- /dev/null
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -0,0 +1,574 @@
+CONFIG_NLM_XLR_BOARD=y
+CONFIG_HIGHMEM=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_KEXEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_CROSS_COMPILE="mips64-unknown-linux-gnu-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs"
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NETLABEL=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_TIPC=m
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+CONFIG_PHONET=m
+CONFIG_IEEE802154=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_DCB=y
+CONFIG_NET_PKTGEN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_CONNECTOR=y
+CONFIG_MTD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_MISC_DEVICES=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+# CONFIG_DEVKMEM is not set
+CONFIG_STALDRV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=48
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_RAW_DRIVER=m
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_ADFS_FS=m
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+CONFIG_EXOFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_ICS=y
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SCHED_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KGDB=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_LSM_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SMACK=y
+CONFIG_SECURITY_TOMOYO=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRC_CCITT=m
+CONFIG_CRC7=m
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
index 650ac9b..b4db69fb 100644
--- a/arch/mips/include/asm/cache.h
+++ b/arch/mips/include/asm/cache.h
@@ -17,6 +17,6 @@
#define SMP_CACHE_SHIFT L1_CACHE_SHIFT
#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h
index fa4328f..65f9bdd 100644
--- a/arch/mips/include/asm/cevt-r4k.h
+++ b/arch/mips/include/asm/cevt-r4k.h
@@ -14,6 +14,9 @@
#ifndef __ASM_CEVT_R4K_H
#define __ASM_CEVT_R4K_H
+#include <linux/clockchips.h>
+#include <asm/time.h>
+
DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
void mips_event_handler(struct clock_event_device *dev);
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 8687753..34c0d3c 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -33,6 +33,7 @@
#define PRID_COMP_TOSHIBA 0x070000
#define PRID_COMP_LSI 0x080000
#define PRID_COMP_LEXRA 0x0b0000
+#define PRID_COMP_NETLOGIC 0x0c0000
#define PRID_COMP_CAVIUM 0x0d0000
#define PRID_COMP_INGENIC 0xd00000
@@ -142,6 +143,31 @@
#define PRID_IMP_JZRISC 0x0200
/*
+ * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
+ */
+#define PRID_IMP_NETLOGIC_XLR732 0x0000
+#define PRID_IMP_NETLOGIC_XLR716 0x0200
+#define PRID_IMP_NETLOGIC_XLR532 0x0900
+#define PRID_IMP_NETLOGIC_XLR308 0x0600
+#define PRID_IMP_NETLOGIC_XLR532C 0x0800
+#define PRID_IMP_NETLOGIC_XLR516C 0x0a00
+#define PRID_IMP_NETLOGIC_XLR508C 0x0b00
+#define PRID_IMP_NETLOGIC_XLR308C 0x0f00
+#define PRID_IMP_NETLOGIC_XLS608 0x8000
+#define PRID_IMP_NETLOGIC_XLS408 0x8800
+#define PRID_IMP_NETLOGIC_XLS404 0x8c00
+#define PRID_IMP_NETLOGIC_XLS208 0x8e00
+#define PRID_IMP_NETLOGIC_XLS204 0x8f00
+#define PRID_IMP_NETLOGIC_XLS108 0xce00
+#define PRID_IMP_NETLOGIC_XLS104 0xcf00
+#define PRID_IMP_NETLOGIC_XLS616B 0x4000
+#define PRID_IMP_NETLOGIC_XLS608B 0x4a00
+#define PRID_IMP_NETLOGIC_XLS416B 0x4400
+#define PRID_IMP_NETLOGIC_XLS412B 0x4c00
+#define PRID_IMP_NETLOGIC_XLS408B 0x4e00
+#define PRID_IMP_NETLOGIC_XLS404B 0x4f00
+
+/*
* Definitions for 7:0 on legacy processors
*/
@@ -234,6 +260,7 @@
*/
CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
+ CPU_XLR,
CPU_LAST
};
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 655f849..7aa37dd 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -5,7 +5,9 @@
#include <asm/cache.h>
#include <asm-generic/dma-coherent.h>
+#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
#include <dma-coherence.h>
+#endif
extern struct dma_map_ops *mips_dma_map_ops;
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h
index f5e85601..c565b7c 100644
--- a/arch/mips/include/asm/hugetlb.h
+++ b/arch/mips/include/asm/hugetlb.h
@@ -70,6 +70,7 @@
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
+ flush_tlb_mm(vma->vm_mm);
}
static inline int huge_pte_none(pte_t pte)
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 48bb823..9ad0113 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,13 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_LATCH LATCH
+
extern raw_spinlock_t i8253_lock;
extern void setup_pit_timer(void);
+#define inb_pit inb_p
+#define outb_pit outb_p
+
#endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h
index 7622ccf..1881b31 100644
--- a/arch/mips/include/asm/jump_label.h
+++ b/arch/mips/include/asm/jump_label.h
@@ -20,16 +20,18 @@
#define WORD_INSN ".word"
#endif
-#define JUMP_LABEL(key, label) \
- do { \
- asm goto("1:\tnop\n\t" \
- "nop\n\t" \
- ".pushsection __jump_table, \"a\"\n\t" \
- WORD_INSN " 1b, %l[" #label "], %0\n\t" \
- ".popsection\n\t" \
- : : "i" (key) : : label); \
- } while (0)
-
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+ asm goto("1:\tnop\n\t"
+ "nop\n\t"
+ ".pushsection __jump_table, \"aw\"\n\t"
+ WORD_INSN " 1b, %l[l_yes], %0\n\t"
+ ".popsection\n\t"
+ : : "i" (key) : : l_yes);
+ return false;
+l_yes:
+ return true;
+}
#endif /* __KERNEL__ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index a697661..f260ebe 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -161,6 +161,45 @@
return ALCHEMY_CPU_UNKNOWN;
}
+/* return number of uarts on a given cputype */
+static inline int alchemy_get_uarts(int type)
+{
+ switch (type) {
+ case ALCHEMY_CPU_AU1000:
+ return 4;
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1200:
+ return 2;
+ case ALCHEMY_CPU_AU1100:
+ case ALCHEMY_CPU_AU1550:
+ return 3;
+ }
+ return 0;
+}
+
+/* enable an UART block if it isn't already */
+static inline void alchemy_uart_enable(u32 uart_phys)
+{
+ void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
+ /* reset, enable clock, deassert reset */
+ if ((__raw_readl(addr + 0x100) & 3) != 3) {
+ __raw_writel(0, addr + 0x100);
+ wmb();
+ __raw_writel(1, addr + 0x100);
+ wmb();
+ }
+ __raw_writel(3, addr + 0x100);
+ wmb();
+}
+
+static inline void alchemy_uart_disable(u32 uart_phys)
+{
+ void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+ __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */
+ wmb();
+}
+
static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
@@ -180,6 +219,20 @@
wmb();
}
+/* return number of ethernet MACs on a given cputype */
+static inline int alchemy_get_macs(int type)
+{
+ switch (type) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1550:
+ return 2;
+ case ALCHEMY_CPU_AU1100:
+ return 1;
+ }
+ return 0;
+}
+
/* arch/mips/au1000/common/clocks.c */
extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
@@ -630,38 +683,42 @@
/*
* Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
*/
+#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
+#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */
+#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
+#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
+#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
+#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
+#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
+#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
+
+
#ifdef CONFIG_SOC_AU1000
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define DMA0_PHYS_ADDR 0x14002000
-#define DMA1_PHYS_ADDR 0x14002100
-#define DMA2_PHYS_ADDR 0x14002200
-#define DMA3_PHYS_ADDR 0x14002300
-#define DMA4_PHYS_ADDR 0x14002400
-#define DMA5_PHYS_ADDR 0x14002500
-#define DMA6_PHYS_ADDR 0x14002600
-#define DMA7_PHYS_ADDR 0x14002700
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
-#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
-#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
-#define MAC0_PHYS_ADDR 0x10500000
-#define MAC1_PHYS_ADDR 0x10510000
-#define MACEN_PHYS_ADDR 0x10520000
-#define MACDMA0_PHYS_ADDR 0x14004000
-#define MACDMA1_PHYS_ADDR 0x14004200
-#define I2S_PHYS_ADDR 0x11000000
-#define UART0_PHYS_ADDR 0x11100000
-#define UART1_PHYS_ADDR 0x11200000
-#define UART2_PHYS_ADDR 0x11300000
-#define UART3_PHYS_ADDR 0x11400000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
-#define SYS_PHYS_ADDR 0x11900000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
@@ -672,30 +729,8 @@
#ifdef CONFIG_SOC_AU1500
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define DMA0_PHYS_ADDR 0x14002000
-#define DMA1_PHYS_ADDR 0x14002100
-#define DMA2_PHYS_ADDR 0x14002200
-#define DMA3_PHYS_ADDR 0x14002300
-#define DMA4_PHYS_ADDR 0x14002400
-#define DMA5_PHYS_ADDR 0x14002500
-#define DMA6_PHYS_ADDR 0x14002600
-#define DMA7_PHYS_ADDR 0x14002700
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
-#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
-#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
-#define MAC0_PHYS_ADDR 0x11500000
-#define MAC1_PHYS_ADDR 0x11510000
-#define MACEN_PHYS_ADDR 0x11520000
-#define MACDMA0_PHYS_ADDR 0x14004000
-#define MACDMA1_PHYS_ADDR 0x14004200
-#define I2S_PHYS_ADDR 0x11000000
-#define UART0_PHYS_ADDR 0x11100000
-#define UART3_PHYS_ADDR 0x11400000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
#define PCI_MEM_PHYS_ADDR 0x400000000ULL
#define PCI_IO_PHYS_ADDR 0x500000000ULL
#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
@@ -710,34 +745,10 @@
#ifdef CONFIG_SOC_AU1100
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define DMA0_PHYS_ADDR 0x14002000
-#define DMA1_PHYS_ADDR 0x14002100
-#define DMA2_PHYS_ADDR 0x14002200
-#define DMA3_PHYS_ADDR 0x14002300
-#define DMA4_PHYS_ADDR 0x14002400
-#define DMA5_PHYS_ADDR 0x14002500
-#define DMA6_PHYS_ADDR 0x14002600
-#define DMA7_PHYS_ADDR 0x14002700
-#define IC0_PHYS_ADDR 0x10400000
-#define SD0_PHYS_ADDR 0x10600000
-#define SD1_PHYS_ADDR 0x10680000
-#define IC1_PHYS_ADDR 0x11800000
-#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
-#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
-#define MAC0_PHYS_ADDR 0x10500000
-#define MACEN_PHYS_ADDR 0x10520000
-#define MACDMA0_PHYS_ADDR 0x14004000
-#define MACDMA1_PHYS_ADDR 0x14004200
-#define I2S_PHYS_ADDR 0x11000000
-#define UART0_PHYS_ADDR 0x11100000
-#define UART1_PHYS_ADDR 0x11200000
-#define UART3_PHYS_ADDR 0x11400000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
@@ -749,22 +760,8 @@
#ifdef CONFIG_SOC_AU1550
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
#define USBH_PHYS_ADDR 0x14020000
-#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
-#define MAC0_PHYS_ADDR 0x10500000
-#define MAC1_PHYS_ADDR 0x10510000
-#define MACEN_PHYS_ADDR 0x10520000
-#define MACDMA0_PHYS_ADDR 0x14004000
-#define MACDMA1_PHYS_ADDR 0x14004200
-#define UART0_PHYS_ADDR 0x11100000
-#define UART1_PHYS_ADDR 0x11200000
-#define UART3_PHYS_ADDR 0x11400000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
-#define DDMA_PHYS_ADDR 0x14002000
#define PE_PHYS_ADDR 0x14008000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
@@ -786,19 +783,10 @@
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define AES_PHYS_ADDR 0x10300000
#define CIM_PHYS_ADDR 0x14004000
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
#define USBM_PHYS_ADDR 0x14020000
#define USBH_PHYS_ADDR 0x14020100
-#define UART0_PHYS_ADDR 0x11100000
-#define UART1_PHYS_ADDR 0x11200000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
-#define DDMA_PHYS_ADDR 0x14002000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
-#define SD0_PHYS_ADDR 0x10600000
-#define SD1_PHYS_ADDR 0x10680000
#define LCD_PHYS_ADDR 0x15000000
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
@@ -835,183 +823,43 @@
#endif
-/* Interrupt Controller register offsets */
-#define IC_CFG0RD 0x40
-#define IC_CFG0SET 0x40
-#define IC_CFG0CLR 0x44
-#define IC_CFG1RD 0x48
-#define IC_CFG1SET 0x48
-#define IC_CFG1CLR 0x4C
-#define IC_CFG2RD 0x50
-#define IC_CFG2SET 0x50
-#define IC_CFG2CLR 0x54
-#define IC_REQ0INT 0x54
-#define IC_SRCRD 0x58
-#define IC_SRCSET 0x58
-#define IC_SRCCLR 0x5C
-#define IC_REQ1INT 0x5C
-#define IC_ASSIGNRD 0x60
-#define IC_ASSIGNSET 0x60
-#define IC_ASSIGNCLR 0x64
-#define IC_WAKERD 0x68
-#define IC_WAKESET 0x68
-#define IC_WAKECLR 0x6C
-#define IC_MASKRD 0x70
-#define IC_MASKSET 0x70
-#define IC_MASKCLR 0x74
-#define IC_RISINGRD 0x78
-#define IC_RISINGCLR 0x78
-#define IC_FALLINGRD 0x7C
-#define IC_FALLINGCLR 0x7C
-#define IC_TESTBIT 0x80
-
-
-/* Interrupt Controller 0 */
-#define IC0_CFG0RD 0xB0400040
-#define IC0_CFG0SET 0xB0400040
-#define IC0_CFG0CLR 0xB0400044
-
-#define IC0_CFG1RD 0xB0400048
-#define IC0_CFG1SET 0xB0400048
-#define IC0_CFG1CLR 0xB040004C
-
-#define IC0_CFG2RD 0xB0400050
-#define IC0_CFG2SET 0xB0400050
-#define IC0_CFG2CLR 0xB0400054
-
-#define IC0_REQ0INT 0xB0400054
-#define IC0_SRCRD 0xB0400058
-#define IC0_SRCSET 0xB0400058
-#define IC0_SRCCLR 0xB040005C
-#define IC0_REQ1INT 0xB040005C
-
-#define IC0_ASSIGNRD 0xB0400060
-#define IC0_ASSIGNSET 0xB0400060
-#define IC0_ASSIGNCLR 0xB0400064
-
-#define IC0_WAKERD 0xB0400068
-#define IC0_WAKESET 0xB0400068
-#define IC0_WAKECLR 0xB040006C
-
-#define IC0_MASKRD 0xB0400070
-#define IC0_MASKSET 0xB0400070
-#define IC0_MASKCLR 0xB0400074
-
-#define IC0_RISINGRD 0xB0400078
-#define IC0_RISINGCLR 0xB0400078
-#define IC0_FALLINGRD 0xB040007C
-#define IC0_FALLINGCLR 0xB040007C
-
-#define IC0_TESTBIT 0xB0400080
-
-/* Interrupt Controller 1 */
-#define IC1_CFG0RD 0xB1800040
-#define IC1_CFG0SET 0xB1800040
-#define IC1_CFG0CLR 0xB1800044
-
-#define IC1_CFG1RD 0xB1800048
-#define IC1_CFG1SET 0xB1800048
-#define IC1_CFG1CLR 0xB180004C
-
-#define IC1_CFG2RD 0xB1800050
-#define IC1_CFG2SET 0xB1800050
-#define IC1_CFG2CLR 0xB1800054
-
-#define IC1_REQ0INT 0xB1800054
-#define IC1_SRCRD 0xB1800058
-#define IC1_SRCSET 0xB1800058
-#define IC1_SRCCLR 0xB180005C
-#define IC1_REQ1INT 0xB180005C
-
-#define IC1_ASSIGNRD 0xB1800060
-#define IC1_ASSIGNSET 0xB1800060
-#define IC1_ASSIGNCLR 0xB1800064
-
-#define IC1_WAKERD 0xB1800068
-#define IC1_WAKESET 0xB1800068
-#define IC1_WAKECLR 0xB180006C
-
-#define IC1_MASKRD 0xB1800070
-#define IC1_MASKSET 0xB1800070
-#define IC1_MASKCLR 0xB1800074
-
-#define IC1_RISINGRD 0xB1800078
-#define IC1_RISINGCLR 0xB1800078
-#define IC1_FALLINGRD 0xB180007C
-#define IC1_FALLINGCLR 0xB180007C
-
-#define IC1_TESTBIT 0xB1800080
/* Au1000 */
#ifdef CONFIG_SOC_AU1000
-#define UART0_ADDR 0xB1100000
-#define UART3_ADDR 0xB1400000
-
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
-
-#define AU1000_ETH0_BASE 0xB0500000
-#define AU1000_ETH1_BASE 0xB0510000
-#define AU1000_MAC0_ENABLE 0xB0520000
-#define AU1000_MAC1_ENABLE 0xB0520004
-#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
-#define UART0_ADDR 0xB1100000
-#define UART3_ADDR 0xB1400000
-
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017fffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
-
-#define AU1500_ETH0_BASE 0xB1500000
-#define AU1500_ETH1_BASE 0xB1510000
-#define AU1500_MAC0_ENABLE 0xB1520000
-#define AU1500_MAC1_ENABLE 0xB1520004
-#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
-#define UART0_ADDR 0xB1100000
-#define UART3_ADDR 0xB1400000
-
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
-
-#define AU1100_ETH0_BASE 0xB0500000
-#define AU1100_MAC0_ENABLE 0xB0520000
-#define NUM_ETH_INTERFACES 1
#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
-#define UART0_ADDR 0xB1100000
#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
#define USB_OHCI_LEN 0x00060000
#define USB_HOST_CONFIG 0xB4027ffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
-
-#define AU1550_ETH0_BASE 0xB0500000
-#define AU1550_ETH1_BASE 0xB0510000
-#define AU1550_MAC0_ENABLE 0xB0520000
-#define AU1550_MAC1_ENABLE 0xB0520004
-#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
-#define UART0_ADDR 0xB1100000
-
#define USB_UOC_BASE 0x14020020
#define USB_UOC_LEN 0x20
#define USB_OHCI_BASE 0x14020100
@@ -1504,22 +1352,6 @@
#define SYS_PINFUNC_S1B (1 << 2)
#endif
-#define SYS_TRIOUTRD 0xB1900100
-#define SYS_TRIOUTCLR 0xB1900100
-#define SYS_OUTPUTRD 0xB1900108
-#define SYS_OUTPUTSET 0xB1900108
-#define SYS_OUTPUTCLR 0xB190010C
-#define SYS_PINSTATERD 0xB1900110
-#define SYS_PININPUTEN 0xB1900110
-
-/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE 0xB1700000
-#define GPIO2_DIR (GPIO2_BASE + 0)
-#define GPIO2_OUTPUT (GPIO2_BASE + 8)
-#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
-
/* Power Management */
#define SYS_SCRATCH0 0xB1900018
#define SYS_SCRATCH1 0xB190001C
@@ -1635,12 +1467,6 @@
# define AC97C_RS (1 << 1)
# define AC97C_CE (1 << 0)
-/* Secure Digital (SD) Controller */
-#define SD0_XMIT_FIFO 0xB0600000
-#define SD0_RECV_FIFO 0xB0600004
-#define SD1_XMIT_FIFO 0xB0680000
-#define SD1_RECV_FIFO 0xB0680004
-
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index c333b4e..59f5b55 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -37,10 +37,6 @@
#define NUM_AU1000_DMA_CHANNELS 8
-/* DMA Channel Base Addresses */
-#define DMA_CHANNEL_BASE 0xB4002000
-#define DMA_CHANNEL_LEN 0x00000100
-
/* DMA Channel Register Offsets */
#define DMA_MODE_SET 0x00000000
#define DMA_MODE_READ DMA_MODE_SET
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index c8a553a3..2fdacfe 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -37,14 +37,6 @@
#ifndef _LANGUAGE_ASSEMBLY
-/*
- * The DMA base addresses.
- * The channels are every 256 bytes (0x0100) from the channel 0 base.
- * Interrupt status/enable is bits 15:0 for channels 15 to zero.
- */
-#define DDMA_GLOBAL_BASE 0xb4003000
-#define DDMA_CHANNEL_BASE 0xb4002000
-
typedef volatile struct dbdma_global {
u32 ddma_config;
u32 ddma_intstat;
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 62d2f13..1f41a52 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -24,6 +24,23 @@
#define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off))
+/* GPIO1 registers within SYS_ area */
+#define SYS_TRIOUTRD 0x100
+#define SYS_TRIOUTCLR 0x100
+#define SYS_OUTPUTRD 0x108
+#define SYS_OUTPUTSET 0x108
+#define SYS_OUTPUTCLR 0x10C
+#define SYS_PINSTATERD 0x110
+#define SYS_PININPUTEN 0x110
+
+/* register offsets within GPIO2 block */
+#define GPIO2_DIR 0x00
+#define GPIO2_OUTPUT 0x08
+#define GPIO2_PINSTATE 0x0C
+#define GPIO2_INTENABLE 0x10
+#define GPIO2_ENABLE 0x14
+
+struct gpio;
static inline int au1000_gpio1_to_irq(int gpio)
{
@@ -200,23 +217,26 @@
*/
static inline void alchemy_gpio1_set_value(int gpio, int v)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
- au_writel(mask, r);
- au_sync();
+ __raw_writel(mask, base + r);
+ wmb();
}
static inline int alchemy_gpio1_get_value(int gpio)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- return au_readl(SYS_PINSTATERD) & mask;
+ return __raw_readl(base + SYS_PINSTATERD) & mask;
}
static inline int alchemy_gpio1_direction_input(int gpio)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- au_writel(mask, SYS_TRIOUTCLR);
- au_sync();
+ __raw_writel(mask, base + SYS_TRIOUTCLR);
+ wmb();
return 0;
}
@@ -257,27 +277,31 @@
*/
static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
- unsigned long d = au_readl(GPIO2_DIR);
+ unsigned long d = __raw_readl(base + GPIO2_DIR);
+
if (to_out)
d |= mask;
else
d &= ~mask;
- au_writel(d, GPIO2_DIR);
- au_sync();
+ __raw_writel(d, base + GPIO2_DIR);
+ wmb();
}
static inline void alchemy_gpio2_set_value(int gpio, int v)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
unsigned long mask;
mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
- au_writel(mask, GPIO2_OUTPUT);
- au_sync();
+ __raw_writel(mask, base + GPIO2_OUTPUT);
+ wmb();
}
static inline int alchemy_gpio2_get_value(int gpio)
{
- return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
}
static inline int alchemy_gpio2_direction_input(int gpio)
@@ -329,21 +353,23 @@
*/
static inline void alchemy_gpio1_input_enable(void)
{
- au_writel(0, SYS_PININPUTEN); /* the write op is key */
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */
+ wmb();
}
/* GPIO2 shared interrupts and control */
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
{
- unsigned long r = au_readl(GPIO2_INTENABLE);
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
if (en)
r |= 1 << gpio2;
else
r &= ~(1 << gpio2);
- au_writel(r, GPIO2_INTENABLE);
- au_sync();
+ __raw_writel(r, base + GPIO2_INTENABLE);
+ wmb();
}
/**
@@ -418,10 +444,11 @@
*/
static inline void alchemy_gpio2_enable(void)
{
- au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */
- au_sync();
- au_writel(1, GPIO2_ENABLE); /* clock enabled */
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */
+ wmb();
+ __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */
+ wmb();
}
/**
@@ -431,8 +458,9 @@
*/
static inline void alchemy_gpio2_disable(void)
{
- au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */
+ wmb();
}
/**********************************************************************/
@@ -556,6 +584,16 @@
alchemy_gpio_set_value(gpio, v);
}
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ gpio_set_value(gpio, value);
+}
+
static inline int gpio_is_valid(int gpio)
{
return alchemy_gpio_is_valid(gpio);
@@ -581,10 +619,50 @@
return 0;
}
+static inline int gpio_request_one(unsigned gpio,
+ unsigned long flags, const char *label)
+{
+ return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+ return 0;
+}
+
static inline void gpio_free(unsigned gpio)
{
}
+static inline void gpio_free_array(struct gpio *array, size_t num)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+ return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
index 9759588..184d5ec 100644
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -39,8 +39,16 @@
static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
{
- sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
- &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+ if (strchr(buf, ':'))
+ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
+ &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+ &macaddr[5]);
+ else if (strchr(buf, '-'))
+ sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
+ &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+ &macaddr[5]);
+ else
+ printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
}
#endif
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
index 32978d3..ed72e6a 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
@@ -88,7 +88,7 @@
char kernel_crc[CRC_LEN];
/* 228-235: Unused at present */
char reserved1[8];
- /* 236-239: CRC32 of header excluding tagVersion */
+ /* 236-239: CRC32 of header excluding last 20 bytes */
char header_crc[CRC_LEN];
/* 240-255: Unused at present */
char reserved2[16];
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index 0b2b5eb..dedef7d 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -63,6 +63,11 @@
# CN30XX Disable instruction prefetching
or v0, v0, 0x2000
skip:
+ # First clear off CvmCtl[IPPCI] bit and move the performance
+ # counters interrupt to IRQ 6
+ li v1, ~(7 << 7)
+ and v0, v0, v1
+ ori v0, v0, (6 << 7)
# Write the cavium control register
dmtc0 v0, CP0_CVMCTL_REG
sync
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
new file mode 100644
index 0000000..ce2f029
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -0,0 +1,63 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _LANTIQ_H__
+#define _LANTIQ_H__
+
+#include <linux/irq.h>
+
+/* generic reg access functions */
+#define ltq_r32(reg) __raw_readl(reg)
+#define ltq_w32(val, reg) __raw_writel(val, reg)
+#define ltq_w32_mask(clear, set, reg) \
+ ltq_w32((ltq_r32(reg) & ~(clear)) | (set), reg)
+#define ltq_r8(reg) __raw_readb(reg)
+#define ltq_w8(val, reg) __raw_writeb(val, reg)
+
+/* register access macros for EBU and CGU */
+#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
+#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
+#define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
+#define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
+
+extern __iomem void *ltq_ebu_membase;
+extern __iomem void *ltq_cgu_membase;
+
+extern unsigned int ltq_get_cpu_ver(void);
+extern unsigned int ltq_get_soc_type(void);
+
+/* clock speeds */
+#define CLOCK_60M 60000000
+#define CLOCK_83M 83333333
+#define CLOCK_111M 111111111
+#define CLOCK_133M 133333333
+#define CLOCK_167M 166666667
+#define CLOCK_200M 200000000
+#define CLOCK_266M 266666666
+#define CLOCK_333M 333333333
+#define CLOCK_400M 400000000
+
+/* spinlock all ebu i/o */
+extern spinlock_t ebu_lock;
+
+/* some irq helpers */
+extern void ltq_disable_irq(struct irq_data *data);
+extern void ltq_mask_and_ack_irq(struct irq_data *data);
+extern void ltq_enable_irq(struct irq_data *data);
+
+/* find out what caused the last cpu reset */
+extern int ltq_reset_cause(void);
+#define LTQ_RST_CAUSE_WDTRST 0x20
+
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
+#define LTQ_FLASH_START 0x10000000
+#define LTQ_FLASH_MAX 0x04000000
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
new file mode 100644
index 0000000..a305f1d
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
@@ -0,0 +1,53 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_PLATFORM_H__
+#define _LANTIQ_PLATFORM_H__
+
+#include <linux/mtd/partitions.h>
+#include <linux/socket.h>
+
+/* struct used to pass info to the pci core */
+enum {
+ PCI_CLOCK_INT = 0,
+ PCI_CLOCK_EXT
+};
+
+#define PCI_EXIN0 0x0001
+#define PCI_EXIN1 0x0002
+#define PCI_EXIN2 0x0004
+#define PCI_EXIN3 0x0008
+#define PCI_EXIN4 0x0010
+#define PCI_EXIN5 0x0020
+#define PCI_EXIN_MAX 6
+
+#define PCI_GNT1 0x0040
+#define PCI_GNT2 0x0080
+#define PCI_GNT3 0x0100
+#define PCI_GNT4 0x0200
+
+#define PCI_REQ1 0x0400
+#define PCI_REQ2 0x0800
+#define PCI_REQ3 0x1000
+#define PCI_REQ4 0x2000
+#define PCI_REQ_SHIFT 10
+#define PCI_REQ_MASK 0xf
+
+struct ltq_pci_data {
+ int clock;
+ int gpio;
+ int irq[16];
+};
+
+/* struct used to pass info to network drivers */
+struct ltq_eth_data {
+ struct sockaddr mac;
+ int mii_mode;
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/war.h b/arch/mips/include/asm/mach-lantiq/war.h
new file mode 100644
index 0000000..01b08ef
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/war.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H
+#define __ASM_MIPS_MACH_LANTIQ_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/irq.h b/arch/mips/include/asm/mach-lantiq/xway/irq.h
new file mode 100644
index 0000000..a1471d2
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef __LANTIQ_IRQ_H
+#define __LANTIQ_IRQ_H
+
+#include <lantiq_irq.h>
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
new file mode 100644
index 0000000..b4465a8
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@@ -0,0 +1,66 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_XWAY_IRQ_H__
+#define _LANTIQ_XWAY_IRQ_H__
+
+#define INT_NUM_IRQ0 8
+#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8))
+#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1)
+#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2)
+
+#define LTQ_ASC_ASE_TIR INT_NUM_IM2_IRL0
+#define LTQ_ASC_ASE_RIR (INT_NUM_IM2_IRL0 + 2)
+#define LTQ_ASC_ASE_EIR (INT_NUM_IM2_IRL0 + 3)
+
+#define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
+#define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
+#define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
+
+#define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
+#define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
+
+#define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
+#define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22)
+#define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
+#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
+#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
+#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
+#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
+#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
+#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
+#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
+#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
+#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
+#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
+#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
+#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
+#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
+#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
+#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
+#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
+#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
+#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
+#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
+
+#define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
+
+#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
new file mode 100644
index 0000000..8a3c6be
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -0,0 +1,141 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_XWAY_H__
+#define _LTQ_XWAY_H__
+
+#ifdef CONFIG_SOC_TYPE_XWAY
+
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_DANUBE1 0x129
+#define SOC_ID_DANUBE2 0x12B
+#define SOC_ID_TWINPASS 0x12D
+#define SOC_ID_AMAZON_SE 0x152
+#define SOC_ID_ARX188 0x16C
+#define SOC_ID_ARX168 0x16D
+#define SOC_ID_ARX182 0x16F
+
+/* SoC Types */
+#define SOC_TYPE_DANUBE 0x01
+#define SOC_TYPE_TWINPASS 0x02
+#define SOC_TYPE_AR9 0x03
+#define SOC_TYPE_VR9 0x04
+#define SOC_TYPE_AMAZON_SE 0x05
+
+/* ASC0/1 - serial port */
+#define LTQ_ASC0_BASE_ADDR 0x1E100400
+#define LTQ_ASC1_BASE_ADDR 0x1E100C00
+#define LTQ_ASC_SIZE 0x400
+
+/* RCU - reset control unit */
+#define LTQ_RCU_BASE_ADDR 0x1F203000
+#define LTQ_RCU_SIZE 0x1000
+
+/* GPTU - general purpose timer unit */
+#define LTQ_GPTU_BASE_ADDR 0x18000300
+#define LTQ_GPTU_SIZE 0x100
+
+/* EBU - external bus unit */
+#define LTQ_EBU_GPIO_START 0x14000000
+#define LTQ_EBU_GPIO_SIZE 0x1000
+
+#define LTQ_EBU_BASE_ADDR 0x1E105300
+#define LTQ_EBU_SIZE 0x100
+
+#define LTQ_EBU_BUSCON0 0x0060
+#define LTQ_EBU_PCC_CON 0x0090
+#define LTQ_EBU_PCC_IEN 0x00A4
+#define LTQ_EBU_PCC_ISTAT 0x00A0
+#define LTQ_EBU_BUSCON1 0x0064
+#define LTQ_EBU_ADDRSEL1 0x0024
+#define EBU_WRDIS 0x80000000
+
+/* CGU - clock generation unit */
+#define LTQ_CGU_BASE_ADDR 0x1F103000
+#define LTQ_CGU_SIZE 0x1000
+
+/* ICU - interrupt control unit */
+#define LTQ_ICU_BASE_ADDR 0x1F880200
+#define LTQ_ICU_SIZE 0x100
+
+/* EIU - external interrupt unit */
+#define LTQ_EIU_BASE_ADDR 0x1F101000
+#define LTQ_EIU_SIZE 0x1000
+
+/* PMU - power management unit */
+#define LTQ_PMU_BASE_ADDR 0x1F102000
+#define LTQ_PMU_SIZE 0x1000
+
+#define PMU_DMA 0x0020
+#define PMU_USB 0x8041
+#define PMU_LED 0x0800
+#define PMU_GPT 0x1000
+#define PMU_PPE 0x2000
+#define PMU_FPI 0x4000
+#define PMU_SWITCH 0x10000000
+
+/* ETOP - ethernet */
+#define LTQ_ETOP_BASE_ADDR 0x1E180000
+#define LTQ_ETOP_SIZE 0x40000
+
+/* DMA */
+#define LTQ_DMA_BASE_ADDR 0x1E104100
+#define LTQ_DMA_SIZE 0x800
+
+/* PCI */
+#define PCI_CR_BASE_ADDR 0x1E105400
+#define PCI_CR_SIZE 0x400
+
+/* WDT */
+#define LTQ_WDT_BASE_ADDR 0x1F8803F0
+#define LTQ_WDT_SIZE 0x10
+
+/* STP - serial to parallel conversion unit */
+#define LTQ_STP_BASE_ADDR 0x1E100BB0
+#define LTQ_STP_SIZE 0x40
+
+/* GPIO */
+#define LTQ_GPIO0_BASE_ADDR 0x1E100B10
+#define LTQ_GPIO1_BASE_ADDR 0x1E100B40
+#define LTQ_GPIO2_BASE_ADDR 0x1E100B70
+#define LTQ_GPIO_SIZE 0x30
+
+/* SSC */
+#define LTQ_SSC_BASE_ADDR 0x1e100800
+#define LTQ_SSC_SIZE 0x100
+
+/* MEI - dsl core */
+#define LTQ_MEI_BASE_ADDR 0x1E116000
+
+/* DEU - data encryption unit */
+#define LTQ_DEU_BASE_ADDR 0x1E103100
+
+/* MPS - multi processor unit (voice) */
+#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
+#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
+/* request a non-gpio and set the PIO config */
+extern int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+ unsigned int alt1, unsigned int dir, const char *name);
+extern void ltq_pmu_enable(unsigned int module);
+extern void ltq_pmu_disable(unsigned int module);
+
+static inline int ltq_is_ar9(void)
+{
+ return (ltq_get_soc_type() == SOC_TYPE_AR9);
+}
+
+static inline int ltq_is_vr9(void)
+{
+ return (ltq_get_soc_type() == SOC_TYPE_VR9);
+}
+
+#endif /* CONFIG_SOC_TYPE_XWAY */
+#endif /* _LTQ_XWAY_H__ */
diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
new file mode 100644
index 0000000..872943a
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
@@ -0,0 +1,60 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef LTQ_DMA_H__
+#define LTQ_DMA_H__
+
+#define LTQ_DESC_SIZE 0x08 /* each descriptor is 64bit */
+#define LTQ_DESC_NUM 0x40 /* 64 descriptors / channel */
+
+#define LTQ_DMA_OWN BIT(31) /* owner bit */
+#define LTQ_DMA_C BIT(30) /* complete bit */
+#define LTQ_DMA_SOP BIT(29) /* start of packet */
+#define LTQ_DMA_EOP BIT(28) /* end of packet */
+#define LTQ_DMA_TX_OFFSET(x) ((x & 0x1f) << 23) /* data bytes offset */
+#define LTQ_DMA_RX_OFFSET(x) ((x & 0x7) << 23) /* data bytes offset */
+#define LTQ_DMA_SIZE_MASK (0xffff) /* the size field is 16 bit */
+
+struct ltq_dma_desc {
+ u32 ctl;
+ u32 addr;
+};
+
+struct ltq_dma_channel {
+ int nr; /* the channel number */
+ int irq; /* the mapped irq */
+ int desc; /* the current descriptor */
+ struct ltq_dma_desc *desc_base; /* the descriptor base */
+ int phys; /* physical addr */
+};
+
+enum {
+ DMA_PORT_ETOP = 0,
+ DMA_PORT_DEU,
+};
+
+extern void ltq_dma_enable_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_disable_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_ack_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_open(struct ltq_dma_channel *ch);
+extern void ltq_dma_close(struct ltq_dma_channel *ch);
+extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch);
+extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch);
+extern void ltq_dma_free(struct ltq_dma_channel *ch);
+extern void ltq_dma_init_port(int p);
+
+#endif
diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
new file mode 100644
index 0000000..3b72827
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+#define cpu_has_watch 1
+#define cpu_has_mips16 0
+#define cpu_has_counter 1
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+#define cpu_icache_snoops_remote_store 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 1
+#define cpu_has_mips64r2 0
+
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+
+#endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-netlogic/irq.h b/arch/mips/include/asm/mach-netlogic/irq.h
new file mode 100644
index 0000000..b590245
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/irq.h
@@ -0,0 +1,14 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems.
+ */
+#ifndef __ASM_NETLOGIC_IRQ_H
+#define __ASM_NETLOGIC_IRQ_H
+
+#define NR_IRQS 64
+#define MIPS_CPU_IRQ_BASE 0
+
+#endif /* __ASM_NETLOGIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-netlogic/war.h b/arch/mips/include/asm/mach-netlogic/war.h
new file mode 100644
index 0000000..22da893
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/war.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems.
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_NLM_WAR_H
+#define __ASM_MIPS_MACH_NLM_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_NLM_WAR_H */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index d94085a..bc01a02 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -118,6 +118,8 @@
#define MODULE_PROC_FAMILY "LOONGSON2 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
#else
#error MODULE_PROC_FAMILY undefined for your processor configuration
#endif
diff --git a/arch/mips/include/asm/netlogic/interrupt.h b/arch/mips/include/asm/netlogic/interrupt.h
new file mode 100644
index 0000000..a85aadb
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/interrupt.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_INTERRUPT_H
+#define _ASM_NLM_INTERRUPT_H
+
+/* Defines for the IRQ numbers */
+
+#define IRQ_IPI_SMP_FUNCTION 3
+#define IRQ_IPI_SMP_RESCHEDULE 4
+#define IRQ_MSGRING 6
+#define IRQ_TIMER 7
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h
new file mode 100644
index 0000000..8c53d0b
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/mips-extns.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_MIPS_EXTS_H
+#define _ASM_NLM_MIPS_EXTS_H
+
+/*
+ * XLR and XLP interrupt request and interrupt mask registers
+ */
+#define read_c0_eirr() __read_64bit_c0_register($9, 6)
+#define read_c0_eimr() __read_64bit_c0_register($9, 7)
+#define write_c0_eirr(val) __write_64bit_c0_register($9, 6, val)
+
+/*
+ * Writing EIMR in 32 bit is a special case, the lower 8 bit of the
+ * EIMR is shadowed in the status register, so we cannot save and
+ * restore status register for split read.
+ */
+#define write_c0_eimr(val) \
+do { \
+ if (sizeof(unsigned long) == 4) { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, $9, 7\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ __flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\
+ local_irq_restore(__flags); \
+ } else \
+ __write_64bit_c0_register($9, 7, (val)); \
+} while (0)
+
+static inline int hard_smp_processor_id(void)
+{
+ return __read_32bit_c0_register($15, 1) & 0x3ff;
+}
+
+#endif /*_ASM_NLM_MIPS_EXTS_H */
diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h
new file mode 100644
index 0000000..6878307
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/psb-bootinfo.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NETLOGIC_BOOTINFO_H
+#define _ASM_NETLOGIC_BOOTINFO_H
+
+struct psb_info {
+ uint64_t boot_level;
+ uint64_t io_base;
+ uint64_t output_device;
+ uint64_t uart_print;
+ uint64_t led_output;
+ uint64_t init;
+ uint64_t exit;
+ uint64_t warm_reset;
+ uint64_t wakeup;
+ uint64_t online_cpu_map;
+ uint64_t master_reentry_sp;
+ uint64_t master_reentry_gp;
+ uint64_t master_reentry_fn;
+ uint64_t slave_reentry_fn;
+ uint64_t magic_dword;
+ uint64_t uart_putchar;
+ uint64_t size;
+ uint64_t uart_getchar;
+ uint64_t nmi_handler;
+ uint64_t psb_version;
+ uint64_t mac_addr;
+ uint64_t cpu_frequency;
+ uint64_t board_version;
+ uint64_t malloc;
+ uint64_t free;
+ uint64_t global_shmem_addr;
+ uint64_t global_shmem_size;
+ uint64_t psb_os_cpu_map;
+ uint64_t userapp_cpu_map;
+ uint64_t wakeup_os;
+ uint64_t psb_mem_map;
+ uint64_t board_major_version;
+ uint64_t board_minor_version;
+ uint64_t board_manf_revision;
+ uint64_t board_serial_number;
+ uint64_t psb_physaddr_map;
+ uint64_t xlr_loaderip_config;
+ uint64_t bldr_envp;
+ uint64_t avail_mem_map;
+};
+
+enum {
+ NETLOGIC_IO_SPACE = 0x10,
+ PCIX_IO_SPACE,
+ PCIX_CFG_SPACE,
+ PCIX_MEMORY_SPACE,
+ HT_IO_SPACE,
+ HT_CFG_SPACE,
+ HT_MEMORY_SPACE,
+ SRAM_SPACE,
+ FLASH_CONTROLLER_SPACE
+};
+
+#define NLM_MAX_ARGS 64
+#define NLM_MAX_ENVS 32
+
+/* This is what netlboot passes and linux boot_mem_map is subtly different */
+#define NLM_BOOT_MEM_MAP_MAX 32
+struct nlm_boot_mem_map {
+ int nr_map;
+ struct nlm_boot_mem_map_entry {
+ uint64_t addr; /* start of memory segment */
+ uint64_t size; /* size of memory segment */
+ uint32_t type; /* type of memory segment */
+ } map[NLM_BOOT_MEM_MAP_MAX];
+};
+
+/* Pointer to saved boot loader info */
+extern struct psb_info nlm_prom_info;
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h
new file mode 100644
index 0000000..51f6ad4
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_GPIO_H
+#define _ASM_NLM_GPIO_H
+
+#define NETLOGIC_GPIO_INT_EN_REG 0
+#define NETLOGIC_GPIO_INPUT_INVERSION_REG 1
+#define NETLOGIC_GPIO_IO_DIR_REG 2
+#define NETLOGIC_GPIO_IO_DATA_WR_REG 3
+#define NETLOGIC_GPIO_IO_DATA_RD_REG 4
+
+#define NETLOGIC_GPIO_SWRESET_REG 8
+#define NETLOGIC_GPIO_DRAM1_CNTRL_REG 9
+#define NETLOGIC_GPIO_DRAM1_RATIO_REG 10
+#define NETLOGIC_GPIO_DRAM1_RESET_REG 11
+#define NETLOGIC_GPIO_DRAM1_STATUS_REG 12
+#define NETLOGIC_GPIO_DRAM2_CNTRL_REG 13
+#define NETLOGIC_GPIO_DRAM2_RATIO_REG 14
+#define NETLOGIC_GPIO_DRAM2_RESET_REG 15
+#define NETLOGIC_GPIO_DRAM2_STATUS_REG 16
+
+#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG 21
+#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG 24
+#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG 25
+#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG 26
+
+#define NETLOGIC_GPIO_FUSE_BANK_REG 35
+#define NETLOGIC_GPIO_CPU_RESET_REG 40
+#define NETLOGIC_GPIO_RNG_REG 43
+
+#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT 17
+#define NETLOGIC_GPIO_LED_BITMAP 0x1700000
+#define NETLOGIC_GPIO_LED_0_SHIFT 20
+#define NETLOGIC_GPIO_LED_1_SHIFT 24
+
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET 0x01
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN 0x04
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h
new file mode 100644
index 0000000..2e3a4dd
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/iomap.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_IOMAP_H
+#define _ASM_NLM_IOMAP_H
+
+#define DEFAULT_NETLOGIC_IO_BASE CKSEG1ADDR(0x1ef00000)
+#define NETLOGIC_IO_DDR2_CHN0_OFFSET 0x01000
+#define NETLOGIC_IO_DDR2_CHN1_OFFSET 0x02000
+#define NETLOGIC_IO_DDR2_CHN2_OFFSET 0x03000
+#define NETLOGIC_IO_DDR2_CHN3_OFFSET 0x04000
+#define NETLOGIC_IO_PIC_OFFSET 0x08000
+#define NETLOGIC_IO_UART_0_OFFSET 0x14000
+#define NETLOGIC_IO_UART_1_OFFSET 0x15100
+
+#define NETLOGIC_IO_SIZE 0x1000
+
+#define NETLOGIC_IO_BRIDGE_OFFSET 0x00000
+
+#define NETLOGIC_IO_RLD2_CHN0_OFFSET 0x05000
+#define NETLOGIC_IO_RLD2_CHN1_OFFSET 0x06000
+
+#define NETLOGIC_IO_SRAM_OFFSET 0x07000
+
+#define NETLOGIC_IO_PCIX_OFFSET 0x09000
+#define NETLOGIC_IO_HT_OFFSET 0x0A000
+
+#define NETLOGIC_IO_SECURITY_OFFSET 0x0B000
+
+#define NETLOGIC_IO_GMAC_0_OFFSET 0x0C000
+#define NETLOGIC_IO_GMAC_1_OFFSET 0x0D000
+#define NETLOGIC_IO_GMAC_2_OFFSET 0x0E000
+#define NETLOGIC_IO_GMAC_3_OFFSET 0x0F000
+
+/* XLS devices */
+#define NETLOGIC_IO_GMAC_4_OFFSET 0x20000
+#define NETLOGIC_IO_GMAC_5_OFFSET 0x21000
+#define NETLOGIC_IO_GMAC_6_OFFSET 0x22000
+#define NETLOGIC_IO_GMAC_7_OFFSET 0x23000
+
+#define NETLOGIC_IO_PCIE_0_OFFSET 0x1E000
+#define NETLOGIC_IO_PCIE_1_OFFSET 0x1F000
+#define NETLOGIC_IO_SRIO_0_OFFSET 0x1E000
+#define NETLOGIC_IO_SRIO_1_OFFSET 0x1F000
+
+#define NETLOGIC_IO_USB_0_OFFSET 0x24000
+#define NETLOGIC_IO_USB_1_OFFSET 0x25000
+
+#define NETLOGIC_IO_COMP_OFFSET 0x1D000
+/* end XLS devices */
+
+/* XLR devices */
+#define NETLOGIC_IO_SPI4_0_OFFSET 0x10000
+#define NETLOGIC_IO_XGMAC_0_OFFSET 0x11000
+#define NETLOGIC_IO_SPI4_1_OFFSET 0x12000
+#define NETLOGIC_IO_XGMAC_1_OFFSET 0x13000
+/* end XLR devices */
+
+#define NETLOGIC_IO_I2C_0_OFFSET 0x16000
+#define NETLOGIC_IO_I2C_1_OFFSET 0x17000
+
+#define NETLOGIC_IO_GPIO_OFFSET 0x18000
+#define NETLOGIC_IO_FLASH_OFFSET 0x19000
+#define NETLOGIC_IO_TB_OFFSET 0x1C000
+
+#define NETLOGIC_CPLD_OFFSET KSEG1ADDR(0x1d840000)
+
+/*
+ * Base Address (Virtual) of the PCI Config address space
+ * For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28)
+ * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes
+ * ie 1<<24 = 16M
+ */
+#define DEFAULT_PCI_CONFIG_BASE 0x18000000
+#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000
+#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+typedef volatile __u32 nlm_reg_t;
+extern unsigned long netlogic_io_base;
+
+/* FIXME read once in write_reg */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define netlogic_read_reg(base, offset) ((base)[(offset)])
+#define netlogic_write_reg(base, offset, value) ((base)[(offset)] = (value))
+#else
+#define netlogic_read_reg(base, offset) (be32_to_cpu((base)[(offset)]))
+#define netlogic_write_reg(base, offset, value) \
+ ((base)[(offset)] = cpu_to_be32((value)))
+#endif
+
+#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)]))
+#define netlogic_write_reg_le32(base, offset, value) \
+ ((base)[(offset)] = cpu_to_le32((value)))
+#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset)))
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
new file mode 100644
index 0000000..5cceb74
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/pic.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_XLR_PIC_H
+#define _ASM_NLM_XLR_PIC_H
+
+#define PIC_CLKS_PER_SEC 66666666ULL
+/* PIC hardware interrupt numbers */
+#define PIC_IRT_WD_INDEX 0
+#define PIC_IRT_TIMER_0_INDEX 1
+#define PIC_IRT_TIMER_1_INDEX 2
+#define PIC_IRT_TIMER_2_INDEX 3
+#define PIC_IRT_TIMER_3_INDEX 4
+#define PIC_IRT_TIMER_4_INDEX 5
+#define PIC_IRT_TIMER_5_INDEX 6
+#define PIC_IRT_TIMER_6_INDEX 7
+#define PIC_IRT_TIMER_7_INDEX 8
+#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX
+#define PIC_IRT_UART_0_INDEX 9
+#define PIC_IRT_UART_1_INDEX 10
+#define PIC_IRT_I2C_0_INDEX 11
+#define PIC_IRT_I2C_1_INDEX 12
+#define PIC_IRT_PCMCIA_INDEX 13
+#define PIC_IRT_GPIO_INDEX 14
+#define PIC_IRT_HYPER_INDEX 15
+#define PIC_IRT_PCIX_INDEX 16
+/* XLS */
+#define PIC_IRT_CDE_INDEX 15
+#define PIC_IRT_BRIDGE_TB_XLS_INDEX 16
+/* XLS */
+#define PIC_IRT_GMAC0_INDEX 17
+#define PIC_IRT_GMAC1_INDEX 18
+#define PIC_IRT_GMAC2_INDEX 19
+#define PIC_IRT_GMAC3_INDEX 20
+#define PIC_IRT_XGS0_INDEX 21
+#define PIC_IRT_XGS1_INDEX 22
+#define PIC_IRT_HYPER_FATAL_INDEX 23
+#define PIC_IRT_PCIX_FATAL_INDEX 24
+#define PIC_IRT_BRIDGE_AERR_INDEX 25
+#define PIC_IRT_BRIDGE_BERR_INDEX 26
+#define PIC_IRT_BRIDGE_TB_XLR_INDEX 27
+#define PIC_IRT_BRIDGE_AERR_NMI_INDEX 28
+/* XLS */
+#define PIC_IRT_GMAC4_INDEX 21
+#define PIC_IRT_GMAC5_INDEX 22
+#define PIC_IRT_GMAC6_INDEX 23
+#define PIC_IRT_GMAC7_INDEX 24
+#define PIC_IRT_BRIDGE_ERR_INDEX 25
+#define PIC_IRT_PCIE_LINK0_INDEX 26
+#define PIC_IRT_PCIE_LINK1_INDEX 27
+#define PIC_IRT_PCIE_LINK2_INDEX 23
+#define PIC_IRT_PCIE_LINK3_INDEX 24
+#define PIC_IRT_PCIE_XLSB0_LINK2_INDEX 28
+#define PIC_IRT_PCIE_XLSB0_LINK3_INDEX 29
+#define PIC_IRT_SRIO_LINK0_INDEX 26
+#define PIC_IRT_SRIO_LINK1_INDEX 27
+#define PIC_IRT_SRIO_LINK2_INDEX 28
+#define PIC_IRT_SRIO_LINK3_INDEX 29
+#define PIC_IRT_PCIE_INT_INDEX 28
+#define PIC_IRT_PCIE_FATAL_INDEX 29
+#define PIC_IRT_GPIO_B_INDEX 30
+#define PIC_IRT_USB_INDEX 31
+/* XLS */
+#define PIC_NUM_IRTS 32
+
+
+#define PIC_CLOCK_TIMER 7
+
+/* PIC Registers */
+#define PIC_CTRL 0x00
+#define PIC_IPI 0x04
+#define PIC_INT_ACK 0x06
+
+#define WD_MAX_VAL_0 0x08
+#define WD_MAX_VAL_1 0x09
+#define WD_MASK_0 0x0a
+#define WD_MASK_1 0x0b
+#define WD_HEARBEAT_0 0x0c
+#define WD_HEARBEAT_1 0x0d
+
+#define PIC_IRT_0_BASE 0x40
+#define PIC_IRT_1_BASE 0x80
+#define PIC_TIMER_MAXVAL_0_BASE 0x100
+#define PIC_TIMER_MAXVAL_1_BASE 0x110
+#define PIC_TIMER_COUNT_0_BASE 0x120
+#define PIC_TIMER_COUNT_1_BASE 0x130
+
+#define PIC_IRT_0(picintr) (PIC_IRT_0_BASE + (picintr))
+#define PIC_IRT_1(picintr) (PIC_IRT_1_BASE + (picintr))
+
+#define PIC_TIMER_MAXVAL_0(i) (PIC_TIMER_MAXVAL_0_BASE + (i))
+#define PIC_TIMER_MAXVAL_1(i) (PIC_TIMER_MAXVAL_1_BASE + (i))
+#define PIC_TIMER_COUNT_0(i) (PIC_TIMER_COUNT_0_BASE + (i))
+#define PIC_TIMER_COUNT_1(i) (PIC_TIMER_COUNT_0_BASE + (i))
+
+/*
+ * Mapping between hardware interrupt numbers and IRQs on CPU
+ * we use a simple scheme to map PIC interrupts 0-31 to IRQs
+ * 8-39. This leaves the IRQ 0-7 for cpu interrupts like
+ * count/compare and FMN
+ */
+#define PIC_IRQ_BASE 8
+#define PIC_INTR_TO_IRQ(i) (PIC_IRQ_BASE + (i))
+#define PIC_IRQ_TO_INTR(i) ((i) - PIC_IRQ_BASE)
+
+#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE
+#define PIC_WD_IRQ PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX)
+#define PIC_TIMER_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_0_INDEX)
+#define PIC_TIMER_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_1_INDEX)
+#define PIC_TIMER_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_2_INDEX)
+#define PIC_TIMER_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_3_INDEX)
+#define PIC_TIMER_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_4_INDEX)
+#define PIC_TIMER_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_5_INDEX)
+#define PIC_TIMER_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_6_INDEX)
+#define PIC_TIMER_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_7_INDEX)
+#define PIC_CLOCK_IRQ (PIC_TIMER_7_IRQ)
+#define PIC_UART_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_0_INDEX)
+#define PIC_UART_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_1_INDEX)
+#define PIC_I2C_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_0_INDEX)
+#define PIC_I2C_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_1_INDEX)
+#define PIC_PCMCIA_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCMCIA_INDEX)
+#define PIC_GPIO_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_INDEX)
+#define PIC_HYPER_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_INDEX)
+#define PIC_PCIX_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_INDEX)
+/* XLS */
+#define PIC_CDE_IRQ PIC_INTR_TO_IRQ(PIC_IRT_CDE_INDEX)
+#define PIC_BRIDGE_TB_XLS_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLS_INDEX)
+/* end XLS */
+#define PIC_GMAC_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC0_INDEX)
+#define PIC_GMAC_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC1_INDEX)
+#define PIC_GMAC_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC2_INDEX)
+#define PIC_GMAC_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC3_INDEX)
+#define PIC_XGS_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS0_INDEX)
+#define PIC_XGS_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS1_INDEX)
+#define PIC_HYPER_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_FATAL_INDEX)
+#define PIC_PCIX_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_FATAL_INDEX)
+#define PIC_BRIDGE_AERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX)
+#define PIC_BRIDGE_BERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX)
+#define PIC_BRIDGE_TB_XLR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX)
+#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX)
+/* XLS defines */
+#define PIC_GMAC_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX)
+#define PIC_GMAC_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX)
+#define PIC_GMAC_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC6_INDEX)
+#define PIC_GMAC_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC7_INDEX)
+#define PIC_BRIDGE_ERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_ERR_INDEX)
+#define PIC_PCIE_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK0_INDEX)
+#define PIC_PCIE_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK1_INDEX)
+#define PIC_PCIE_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK2_INDEX)
+#define PIC_PCIE_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK3_INDEX)
+#define PIC_PCIE_XLSB0_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK2_INDEX)
+#define PIC_PCIE_XLSB0_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK3_INDEX)
+#define PIC_SRIO_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK0_INDEX)
+#define PIC_SRIO_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK1_INDEX)
+#define PIC_SRIO_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK2_INDEX)
+#define PIC_SRIO_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK3_INDEX)
+#define PIC_PCIE_INT_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_INT__INDEX)
+#define PIC_PCIE_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_FATAL_INDEX)
+#define PIC_GPIO_B_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_B_INDEX)
+#define PIC_USB_IRQ PIC_INTR_TO_IRQ(PIC_IRT_USB_INDEX)
+#define PIC_IRT_LAST_IRQ PIC_USB_IRQ
+/* end XLS */
+
+#ifndef __ASSEMBLY__
+static inline void pic_send_ipi(u32 ipi)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+ netlogic_write_reg(mmio, PIC_IPI, ipi);
+}
+
+static inline u32 pic_read_control(void)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+ return netlogic_read_reg(mmio, PIC_CTRL);
+}
+
+static inline void pic_write_control(u32 control)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+ netlogic_write_reg(mmio, PIC_CTRL, control);
+}
+
+static inline void pic_update_control(u32 control)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+ netlogic_write_reg(mmio, PIC_CTRL,
+ (control | netlogic_read_reg(mmio, PIC_CTRL)));
+}
+
+#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \
+ ((irq) <= PIC_TIMER_7_IRQ))
+#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \
+ ((irq) <= PIC_IRT_LAST_IRQ))
+#endif
+
+#endif /* _ASM_NLM_XLR_PIC_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h
new file mode 100644
index 0000000..3e63726
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/xlr.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_XLR_H
+#define _ASM_NLM_XLR_H
+
+/* Platform UART functions */
+struct uart_port;
+unsigned int nlm_xlr_uart_in(struct uart_port *, int);
+void nlm_xlr_uart_out(struct uart_port *, int, int);
+
+/* SMP support functions */
+struct irq_desc;
+void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc);
+void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc);
+int nlm_wakeup_secondary_cpus(u32 wakeup_mask);
+void nlm_smp_irq_init(void);
+void nlm_boot_smp_nmi(void);
+void prom_pre_boot_secondary_cpus(void);
+
+extern struct plat_smp_ops nlm_smp_ops;
+extern unsigned long nlm_common_ebase;
+
+/* XLS B silicon "Rook" */
+static inline unsigned int nlm_chip_is_xls_b(void)
+{
+ uint32_t prid = read_c0_prid();
+
+ return ((prid & 0xf000) == 0x4000);
+}
+
+/*
+ * XLR chip types
+ */
+ /* The XLS product line has chip versions 0x[48c]? */
+static inline unsigned int nlm_chip_is_xls(void)
+{
+ uint32_t prid = read_c0_prid();
+
+ return ((prid & 0xf000) == 0x8000 || (prid & 0xf000) == 0x4000 ||
+ (prid & 0xf000) == 0xc000);
+}
+
+#endif /* _ASM_NLM_XLR_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 9f1b8db..de39b1f 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -141,7 +141,8 @@
#define instruction_pointer(regs) ((regs)->cp0_epc)
#define profile_pc(regs) instruction_pointer(regs)
-extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
+extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index d71160de..97f8bf6 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -149,6 +149,9 @@
#define _TIF_FPUBOUND (1<<TIF_FPUBOUND)
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
+/* work to do in syscall_trace_leave() */
+#define _TIF_WORK_SYSCALL_EXIT (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK (0x0000ffef & \
~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index c7f1bfe..bc14447 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -84,12 +84,6 @@
#endif
}
-static inline void clocksource_set_clock(struct clocksource *cs,
- unsigned int clock)
-{
- clocksource_calc_mult_shift(cs, clock, 4);
-}
-
static inline void clockevent_set_clock(struct clock_event_device *cd,
unsigned int clock)
{
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index 9ce9f64..2d8e447 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -211,7 +211,7 @@
*/
int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
{
- int first, pages, npages;
+ int first, pages;
if (laddr > 0xffffff) {
if (vdma_debug)
@@ -228,8 +228,7 @@
return -EINVAL; /* invalid physical address */
}
- npages = pages =
- (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
+ pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
first = laddr >> 12;
if (vdma_debug)
printk("vdma_remap: first=%x, pages=%x\n", first, pages);
diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
index 5ebe75a..d7feb89 100644
--- a/arch/mips/jz4740/dma.c
+++ b/arch/mips/jz4740/dma.c
@@ -242,9 +242,7 @@
static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
{
- uint32_t status;
-
- status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
+ (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 6a9e14d..d97cfbf 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org>
* JZ4740 setup code
*
* This program is free software; you can redistribute it and/or modify it
@@ -14,13 +15,44 @@
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-jz4740/base.h>
+
#include "reset.h"
+
+#define JZ4740_EMC_SDRAM_CTRL 0x80
+
+
+static void __init jz4740_detect_mem(void)
+{
+ void __iomem *jz_emc_base;
+ u32 ctrl, bus, bank, rows, cols;
+ phys_t size;
+
+ jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
+ ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL);
+ bus = 2 - ((ctrl >> 31) & 1);
+ bank = 1 + ((ctrl >> 19) & 1);
+ cols = 8 + ((ctrl >> 26) & 7);
+ rows = 11 + ((ctrl >> 20) & 3);
+ printk(KERN_DEBUG
+ "SDRAM preconfigured: bus:%u bank:%u rows:%u cols:%u\n",
+ bus, bank, rows, cols);
+ iounmap(jz_emc_base);
+
+ size = 1 << (bus + bank + cols + rows);
+ add_memory_region(0, size, BOOT_MEM_RAM);
+}
+
void __init plat_mem_setup(void)
{
jz4740_reset_init();
+ jz4740_detect_mem();
}
const char *get_system_type(void)
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index fe01678..f83c2dd 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -89,7 +89,7 @@
static struct clock_event_device jz4740_clockevent = {
.name = "jz4740-timer",
- .features = CLOCK_EVT_FEAT_PERIODIC,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = jz4740_clockevent_set_next,
.set_mode = jz4740_clockevent_set_mode,
.rating = 200,
@@ -121,8 +121,7 @@
clockevents_register_device(&jz4740_clockevent);
- clocksource_set_clock(&jz4740_clocksource, clk_rate);
- ret = clocksource_register(&jz4740_clocksource);
+ ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
if (ret)
printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
index b2c0151..654d5c3 100644
--- a/arch/mips/jz4740/timer.c
+++ b/arch/mips/jz4740/timer.c
@@ -27,11 +27,13 @@
{
writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
}
+EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog);
void jz4740_timer_disable_watchdog(void)
{
writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
}
+EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog);
void __init jz4740_timer_init(void)
{
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index cedee2b..83bba33 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -52,6 +52,7 @@
obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
+obj-$(CONFIG_CPU_XLR) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SMP_UP) += smp-up.o
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 0b73773..f0ab92a 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -51,8 +51,7 @@
{
struct txx9_tmr_reg __iomem *tmrptr;
- clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
- clocksource_register(&txx9_clocksource.cs);
+ clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
__raw_writel(TCR_BASE, &tmrptr->tcr);
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f65d4c8..bb133d1 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -291,6 +291,12 @@
#endif
}
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+ if (cpu == 0)
+ __elf_platform = plat;
+}
+
/*
* Get the FPU Implementation/Revision.
*/
@@ -614,6 +620,16 @@
case PRID_IMP_LOONGSON2:
c->cputype = CPU_LOONGSON2;
__cpu_name[cpu] = "ICT Loongson-2";
+
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON2E:
+ set_elf_platform(cpu, "loongson2e");
+ break;
+ case PRID_REV_LOONGSON2F:
+ set_elf_platform(cpu, "loongson2f");
+ break;
+ }
+
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS |
MIPS_CPU_FPU | MIPS_CPU_LLSC |
@@ -911,12 +927,14 @@
case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
__cpu_name[cpu] = "Broadcom BMIPS32";
+ set_elf_platform(cpu, "bmips32");
break;
case PRID_IMP_BMIPS3300:
case PRID_IMP_BMIPS3300_ALT:
case PRID_IMP_BMIPS3300_BUG:
c->cputype = CPU_BMIPS3300;
__cpu_name[cpu] = "Broadcom BMIPS3300";
+ set_elf_platform(cpu, "bmips3300");
break;
case PRID_IMP_BMIPS43XX: {
int rev = c->processor_id & 0xff;
@@ -925,15 +943,18 @@
rev <= PRID_REV_BMIPS4380_HI) {
c->cputype = CPU_BMIPS4380;
__cpu_name[cpu] = "Broadcom BMIPS4380";
+ set_elf_platform(cpu, "bmips4380");
} else {
c->cputype = CPU_BMIPS4350;
__cpu_name[cpu] = "Broadcom BMIPS4350";
+ set_elf_platform(cpu, "bmips4350");
}
break;
}
case PRID_IMP_BMIPS5000:
c->cputype = CPU_BMIPS5000;
__cpu_name[cpu] = "Broadcom BMIPS5000";
+ set_elf_platform(cpu, "bmips5000");
c->options |= MIPS_CPU_ULRI;
break;
}
@@ -956,14 +977,12 @@
c->cputype = CPU_CAVIUM_OCTEON_PLUS;
__cpu_name[cpu] = "Cavium Octeon+";
platform:
- if (cpu == 0)
- __elf_platform = "octeon";
+ set_elf_platform(cpu, "octeon");
break;
case PRID_IMP_CAVIUM_CN63XX:
c->cputype = CPU_CAVIUM_OCTEON2;
__cpu_name[cpu] = "Cavium Octeon II";
- if (cpu == 0)
- __elf_platform = "octeon2";
+ set_elf_platform(cpu, "octeon2");
break;
default:
printk(KERN_INFO "Unknown Octeon chip!\n");
@@ -988,6 +1007,59 @@
}
}
+static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
+{
+ decode_configs(c);
+
+ c->options = (MIPS_CPU_TLB |
+ MIPS_CPU_4KEX |
+ MIPS_CPU_COUNTER |
+ MIPS_CPU_DIVEC |
+ MIPS_CPU_WATCH |
+ MIPS_CPU_EJTAG |
+ MIPS_CPU_LLSC);
+
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLR732:
+ case PRID_IMP_NETLOGIC_XLR716:
+ case PRID_IMP_NETLOGIC_XLR532:
+ case PRID_IMP_NETLOGIC_XLR308:
+ case PRID_IMP_NETLOGIC_XLR532C:
+ case PRID_IMP_NETLOGIC_XLR516C:
+ case PRID_IMP_NETLOGIC_XLR508C:
+ case PRID_IMP_NETLOGIC_XLR308C:
+ c->cputype = CPU_XLR;
+ __cpu_name[cpu] = "Netlogic XLR";
+ break;
+
+ case PRID_IMP_NETLOGIC_XLS608:
+ case PRID_IMP_NETLOGIC_XLS408:
+ case PRID_IMP_NETLOGIC_XLS404:
+ case PRID_IMP_NETLOGIC_XLS208:
+ case PRID_IMP_NETLOGIC_XLS204:
+ case PRID_IMP_NETLOGIC_XLS108:
+ case PRID_IMP_NETLOGIC_XLS104:
+ case PRID_IMP_NETLOGIC_XLS616B:
+ case PRID_IMP_NETLOGIC_XLS608B:
+ case PRID_IMP_NETLOGIC_XLS416B:
+ case PRID_IMP_NETLOGIC_XLS412B:
+ case PRID_IMP_NETLOGIC_XLS408B:
+ case PRID_IMP_NETLOGIC_XLS404B:
+ c->cputype = CPU_XLR;
+ __cpu_name[cpu] = "Netlogic XLS";
+ break;
+
+ default:
+ printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n",
+ c->processor_id);
+ c->cputype = CPU_XLR;
+ break;
+ }
+
+ c->isa_level = MIPS_CPU_ISA_M64R1;
+ c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
+}
+
#ifdef CONFIG_64BIT
/* For use by uaccess.h */
u64 __ua_limit;
@@ -1035,6 +1107,9 @@
case PRID_COMP_INGENIC:
cpu_probe_ingenic(c, cpu);
break;
+ case PRID_COMP_NETLOGIC:
+ cpu_probe_netlogic(c, cpu);
+ break;
}
BUG_ON(!__cpu_name[cpu]);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 51489f8..f96f99c 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -49,6 +49,5 @@
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
+ clocksource_register_hz(cs, zbbus);
}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 23da108..46bd7fa 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -59,7 +59,5 @@
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
clocksource_dec.rating = 200 + freq / 10000000;
- clocksource_set_clock(&clocksource_dec, freq);
-
- clocksource_register(&clocksource_dec);
+ clocksource_register_hz(&clocksource_dec, freq);
}
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index a27c16c..2e7c523 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -78,9 +78,7 @@
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
}
/**
@@ -130,43 +128,16 @@
/**
* powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
*
- * The hard part here is coming up with a constant k and shift s such that
- * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
- * when shifted right by s, yields the corresponding number of nanoseconds.
* We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
- * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
- * done in 64 bits, avoiding an overflow means that k must be less than
- * 64 - 48 = 16 bits.
+ * 1 / (27,000,000/8) seconds.
*/
static void __init powertv_tim_c_clocksource_init(void)
{
- int prescale;
- unsigned long dividend;
- unsigned long k;
- int s;
- const int max_k_bits = (64 - 48) - 1;
- const unsigned long billion = 1000000000;
const unsigned long counts_per_second = 27000000 / 8;
- prescale = BITS_PER_LONG - ilog2(billion) - 1;
- dividend = billion << prescale;
- k = dividend / counts_per_second;
- s = ilog2(k) - max_k_bits;
-
- if (s < 0)
- s = prescale;
-
- else {
- k >>= s;
- s += prescale;
- }
-
- clocksource_tim_c.mult = k;
- clocksource_tim_c.shift = s;
clocksource_tim_c.rating = 200;
- clocksource_register(&clocksource_tim_c);
+ clocksource_register_hz(&clocksource_tim_c, counts_per_second);
tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e95a3cd..decd1fa 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -30,9 +30,7 @@
/* Calculate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
return 0;
}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index d14d3d1..e9606d9 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -65,6 +65,5 @@
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
+ clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
}
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index ffa3310..37acfa0 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -167,14 +167,13 @@
FEXPORT(syscall_exit_work_partial)
SAVE_STATIC
syscall_exit_work:
- li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+ li t0, _TIF_WORK_SYSCALL_EXIT
and t0, a2 # a2 is preloaded with TI_FLAGS
beqz t0, work_pending # trace bit set?
- local_irq_enable # could let do_syscall_trace()
+ local_irq_enable # could let syscall_trace_leave()
# call schedule() instead
move a0, sp
- li a1, 1
- jal do_syscall_trace
+ jal syscall_trace_leave
b resume_userspace
#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT)
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 94ca2b0..feb8021 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -23,6 +23,7 @@
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */
+#define JUMP_RANGE_MASK ((1UL << 28) - 1)
#define INSN_NOP 0x00000000 /* nop */
#define INSN_JAL(addr) \
@@ -44,12 +45,12 @@
/* jal (ftrace_caller + 8), jump over the first two instruction */
buf = (u32 *)&insn_jal_ftrace_caller;
- uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+ uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* j ftrace_graph_caller */
buf = (u32 *)&insn_j_ftrace_graph_caller;
- uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+ uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK);
#endif
}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 2392a7a2..391221b 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -125,87 +125,11 @@
setup_irq(0, &irq0);
}
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- int count;
- u32 jifs;
- static int old_count;
- static u32 old_jifs;
-
- raw_spin_lock_irqsave(&i8253_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- /* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff, PIT_CH0);
- outb(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- /*
- * It's possible for count to appear to go the wrong way for a
- * couple of reasons:
- *
- * 1. The timer counter underflows, but we haven't handled the
- * resulting interrupt and incremented jiffies yet.
- * 2. Hardware problem with the timer, not giving us continuous time,
- * the counter does small "jumps" upwards on some Pentium systems,
- * (see c't 95/10 page 335 for Neptun bug.)
- *
- * Previous attempts to handle these cases intelligently were
- * buggy, so we just do the simple thing now.
- */
- if (count > old_count && jifs == old_jifs) {
- count = old_count;
- }
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
- count = (LATCH - 1) - count;
-
- return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource clocksource_pit = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
-};
-
static int __init init_pit_clocksource(void)
{
if (num_possible_cpus() > 1) /* PIT does not scale! */
return 0;
- clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
- return clocksource_register(&clocksource_pit);
+ return clocksource_i8253_init();
}
arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index d21c388..4e6ea1f 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -533,15 +533,10 @@
* Notification of system call entry/exit
* - triggered by current->work.syscall_trace
*/
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+asmlinkage void syscall_trace_enter(struct pt_regs *regs)
{
/* do the secure computing check first */
- if (!entryexit)
- secure_computing(regs->regs[2]);
-
- if (unlikely(current->audit_context) && entryexit)
- audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
- regs->regs[2]);
+ secure_computing(regs->regs[2]);
if (!(current->ptrace & PT_PTRACED))
goto out;
@@ -565,8 +560,40 @@
}
out:
- if (unlikely(current->audit_context) && !entryexit)
+ if (unlikely(current->audit_context))
audit_syscall_entry(audit_arch(), regs->regs[2],
regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+ if (unlikely(current->audit_context))
+ audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]),
+ -regs->regs[2]);
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ /* The 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
+ 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 7f5468b..7a8e1dd 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -88,8 +88,7 @@
SAVE_STATIC
move s0, t2
move a0, sp
- li a1, 0
- jal do_syscall_trace
+ jal syscall_trace_enter
move t0, s0
RESTORE_STATIC
@@ -565,7 +564,7 @@
sys sys_ioprio_get 2 /* 4315 */
sys sys_utimensat 4
sys sys_signalfd 3
- sys sys_ni_syscall 0
+ sys sys_ni_syscall 0 /* was timerfd */
sys sys_eventfd 1
sys sys_fallocate 6 /* 4320 */
sys sys_timerfd_create 2
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index a2e1fcb..2d31c83 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -91,8 +91,7 @@
SAVE_STATIC
move s0, t2
move a0, sp
- li a1, 0
- jal do_syscall_trace
+ jal syscall_trace_enter
move t0, s0
RESTORE_STATIC
@@ -404,7 +403,7 @@
PTR sys_ioprio_get
PTR sys_utimensat /* 5275 */
PTR sys_signalfd
- PTR sys_ni_syscall
+ PTR sys_ni_syscall /* was timerfd */
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create /* 5280 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index b2c7624..38a0503 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -89,8 +89,7 @@
SAVE_STATIC
move s0, t2
move a0, sp
- li a1, 0
- jal do_syscall_trace
+ jal syscall_trace_enter
move t0, s0
RESTORE_STATIC
@@ -403,7 +402,7 @@
PTR sys_ioprio_get
PTR compat_sys_utimensat
PTR compat_sys_signalfd /* 6280 */
- PTR sys_ni_syscall
+ PTR sys_ni_syscall /* was timerfd */
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 049a9c8..91ea5e4 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -123,8 +123,7 @@
move s0, t2 # Save syscall pointer
move a0, sp
- li a1, 0
- jal do_syscall_trace
+ jal syscall_trace_enter
move t0, s0
RESTORE_STATIC
@@ -522,7 +521,7 @@
PTR sys_ioprio_get /* 4315 */
PTR compat_sys_utimensat
PTR compat_sys_signalfd
- PTR sys_ni_syscall
+ PTR sys_ni_syscall /* was timerfd */
PTR sys_eventfd
PTR sys32_fallocate /* 4320 */
PTR sys_timerfd_create
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 5a88cc4..cedac46 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -929,7 +929,7 @@
static void ipi_resched_interrupt(void)
{
- /* Return from interrupt should be enough to cause scheduler check */
+ scheduler_ipi();
}
static void ipi_call_interrupt(void)
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 58beabf..d027657 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -10,12 +10,9 @@
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/linkage.h>
-#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/smp.h>
-#include <linux/mman.h>
#include <linux/ptrace.h>
-#include <linux/sched.h>
#include <linux/string.h>
#include <linux/syscalls.h>
#include <linux/file.h>
@@ -25,11 +22,9 @@
#include <linux/msg.h>
#include <linux/shm.h>
#include <linux/compiler.h>
-#include <linux/module.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
-#include <linux/random.h>
#include <linux/elf.h>
#include <asm/asm.h>
@@ -66,121 +61,6 @@
return res;
}
-unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
-
-EXPORT_SYMBOL(shm_align_mask);
-
-#define COLOUR_ALIGN(addr,pgoff) \
- ((((addr) + shm_align_mask) & ~shm_align_mask) + \
- (((pgoff) << PAGE_SHIFT) & shm_align_mask))
-
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags)
-{
- struct vm_area_struct * vmm;
- int do_color_align;
- unsigned long task_size;
-
-#ifdef CONFIG_32BIT
- task_size = TASK_SIZE;
-#else /* Must be CONFIG_64BIT*/
- task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE;
-#endif
-
- if (len > task_size)
- return -ENOMEM;
-
- if (flags & MAP_FIXED) {
- /* Even MAP_FIXED mappings must reside within task_size. */
- if (task_size - len < addr)
- return -EINVAL;
-
- /*
- * We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- do_color_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_color_align = 1;
- if (addr) {
- if (do_color_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
- vmm = find_vma(current->mm, addr);
- if (task_size - len >= addr &&
- (!vmm || addr + len <= vmm->vm_start))
- return addr;
- }
- addr = current->mm->mmap_base;
- if (do_color_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
- /* At this point: (!vmm || addr < vmm->vm_end). */
- if (task_size - len < addr)
- return -ENOMEM;
- if (!vmm || addr + len <= vmm->vm_start)
- return addr;
- addr = vmm->vm_end;
- if (do_color_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- }
-}
-
-void arch_pick_mmap_layout(struct mm_struct *mm)
-{
- unsigned long random_factor = 0UL;
-
- if (current->flags & PF_RANDOMIZE) {
- random_factor = get_random_int();
- random_factor = random_factor << PAGE_SHIFT;
- if (TASK_IS_32BIT_ADDR)
- random_factor &= 0xfffffful;
- else
- random_factor &= 0xffffffful;
- }
-
- mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
- mm->get_unmapped_area = arch_get_unmapped_area;
- mm->unmap_area = arch_unmap_area;
-}
-
-static inline unsigned long brk_rnd(void)
-{
- unsigned long rnd = get_random_int();
-
- rnd = rnd << PAGE_SHIFT;
- /* 8MB for 32bit, 256MB for 64bit */
- if (TASK_IS_32BIT_ADDR)
- rnd = rnd & 0x7ffffful;
- else
- rnd = rnd & 0xffffffful;
-
- return rnd;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
- unsigned long base = mm->brk;
- unsigned long ret;
-
- ret = PAGE_ALIGN(base + brk_rnd());
-
- if (ret < mm->brk)
- return mm->brk;
-
- return ret;
-}
-
SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags, unsigned long,
fd, off_t, offset)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 71350f7..e9b3af2 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -374,7 +374,8 @@
unsigned long dvpret = dvpe();
#endif /* CONFIG_MIPS_MT_SMTC */
- notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV);
+ if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
+ sig = 0;
console_verbose();
spin_lock_irq(&die_lock);
@@ -383,9 +384,6 @@
mips_mt_regdump(dvpret);
#endif /* CONFIG_MIPS_MT_SMTC */
- if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
- sig = 0;
-
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 832afbb..01af387 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -65,15 +65,18 @@
NOTES :text :note
.dummy : { *(.dummy) } :text
+ _sdata = .; /* Start of data section */
RODATA
/* writeable */
+ _sdata = .; /* Start of data section */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
INIT_TASK_DATA(PAGE_SIZE)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+ READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
DATA_DATA
CONSTRUCTORS
}
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
new file mode 100644
index 0000000..3fccf21
--- /dev/null
+++ b/arch/mips/lantiq/Kconfig
@@ -0,0 +1,23 @@
+if LANTIQ
+
+config SOC_TYPE_XWAY
+ bool
+ default n
+
+choice
+ prompt "SoC Type"
+ default SOC_XWAY
+
+config SOC_AMAZON_SE
+ bool "Amazon SE"
+ select SOC_TYPE_XWAY
+
+config SOC_XWAY
+ bool "XWAY"
+ select SOC_TYPE_XWAY
+ select HW_HAS_PCI
+endchoice
+
+source "arch/mips/lantiq/xway/Kconfig"
+
+endif
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
new file mode 100644
index 0000000..e5dae0e
--- /dev/null
+++ b/arch/mips/lantiq/Makefile
@@ -0,0 +1,11 @@
+# Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y := irq.o setup.o clk.o prom.o devices.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
new file mode 100644
index 0000000..f3dff05
--- /dev/null
+++ b/arch/mips/lantiq/Platform
@@ -0,0 +1,8 @@
+#
+# Lantiq
+#
+
+platform-$(CONFIG_LANTIQ) += lantiq/
+cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq
+load-$(CONFIG_LANTIQ) = 0xffffffff80002000
+cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
new file mode 100644
index 0000000..9456089
--- /dev/null
+++ b/arch/mips/lantiq/clk.c
@@ -0,0 +1,140 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/list.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+#include "clk.h"
+
+struct clk {
+ const char *name;
+ unsigned long rate;
+ unsigned long (*get_rate) (void);
+};
+
+static struct clk *cpu_clk;
+static int cpu_clk_cnt;
+
+/* lantiq socs have 3 static clocks */
+static struct clk cpu_clk_generic[] = {
+ {
+ .name = "cpu",
+ .get_rate = ltq_get_cpu_hz,
+ }, {
+ .name = "fpi",
+ .get_rate = ltq_get_fpi_hz,
+ }, {
+ .name = "io",
+ .get_rate = ltq_get_io_region_clock,
+ },
+};
+
+static struct resource ltq_cgu_resource = {
+ .name = "cgu",
+ .start = LTQ_CGU_BASE_ADDR,
+ .end = LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+/* remapped clock register range */
+void __iomem *ltq_cgu_membase;
+
+void clk_init(void)
+{
+ cpu_clk = cpu_clk_generic;
+ cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+ return clk && !IS_ERR(clk);
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (unlikely(!clk_good(clk)))
+ return 0;
+
+ if (clk->rate != 0)
+ return clk->rate;
+
+ if (clk->get_rate != NULL)
+ return clk->get_rate();
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ int i;
+
+ for (i = 0; i < cpu_clk_cnt; i++)
+ if (!strcmp(id, cpu_clk[i].name))
+ return &cpu_clk[i];
+ BUG();
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ /* not used */
+}
+EXPORT_SYMBOL(clk_put);
+
+static inline u32 ltq_get_counter_resolution(void)
+{
+ u32 res;
+
+ __asm__ __volatile__(
+ ".set push\n"
+ ".set mips32r2\n"
+ "rdhwr %0, $3\n"
+ ".set pop\n"
+ : "=&r" (res)
+ : /* no input */
+ : "memory");
+
+ return res;
+}
+
+void __init plat_time_init(void)
+{
+ struct clk *clk;
+
+ if (insert_resource(&iomem_resource, <q_cgu_resource) < 0)
+ panic("Failed to insert cgu memory\n");
+
+ if (request_mem_region(ltq_cgu_resource.start,
+ resource_size(<q_cgu_resource), "cgu") < 0)
+ panic("Failed to request cgu memory\n");
+
+ ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
+ resource_size(<q_cgu_resource));
+ if (!ltq_cgu_membase) {
+ pr_err("Failed to remap cgu memory\n");
+ unreachable();
+ }
+ clk = clk_get(0, "cpu");
+ mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+ write_c0_compare(read_c0_count());
+ clk_put(clk);
+}
diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
new file mode 100644
index 0000000..3328925
--- /dev/null
+++ b/arch/mips/lantiq/clk.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_CLK_H__
+#define _LTQ_CLK_H__
+
+extern void clk_init(void);
+
+extern unsigned long ltq_get_cpu_hz(void);
+extern unsigned long ltq_get_fpi_hz(void);
+extern unsigned long ltq_get_io_region_clock(void);
+
+#endif
diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
new file mode 100644
index 0000000..7b82c34
--- /dev/null
+++ b/arch/mips/lantiq/devices.c
@@ -0,0 +1,122 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+/* nor flash */
+static struct resource ltq_nor_resource = {
+ .name = "nor",
+ .start = LTQ_FLASH_START,
+ .end = LTQ_FLASH_START + LTQ_FLASH_MAX - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ltq_nor = {
+ .name = "ltq_nor",
+ .resource = <q_nor_resource,
+ .num_resources = 1,
+};
+
+void __init ltq_register_nor(struct physmap_flash_data *data)
+{
+ ltq_nor.dev.platform_data = data;
+ platform_device_register(<q_nor);
+}
+
+/* watchdog */
+static struct resource ltq_wdt_resource = {
+ .name = "watchdog",
+ .start = LTQ_WDT_BASE_ADDR,
+ .end = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+void __init ltq_register_wdt(void)
+{
+ platform_device_register_simple("ltq_wdt", 0, <q_wdt_resource, 1);
+}
+
+/* asc ports */
+static struct resource ltq_asc0_resources[] = {
+ {
+ .name = "asc0",
+ .start = LTQ_ASC0_BASE_ADDR,
+ .end = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ_RES(tx, LTQ_ASC_TIR(0)),
+ IRQ_RES(rx, LTQ_ASC_RIR(0)),
+ IRQ_RES(err, LTQ_ASC_EIR(0)),
+};
+
+static struct resource ltq_asc1_resources[] = {
+ {
+ .name = "asc1",
+ .start = LTQ_ASC1_BASE_ADDR,
+ .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ_RES(tx, LTQ_ASC_TIR(1)),
+ IRQ_RES(rx, LTQ_ASC_RIR(1)),
+ IRQ_RES(err, LTQ_ASC_EIR(1)),
+};
+
+void __init ltq_register_asc(int port)
+{
+ switch (port) {
+ case 0:
+ platform_device_register_simple("ltq_asc", 0,
+ ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources));
+ break;
+ case 1:
+ platform_device_register_simple("ltq_asc", 1,
+ ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources));
+ break;
+ default:
+ break;
+ }
+}
+
+#ifdef CONFIG_PCI
+/* pci */
+static struct platform_device ltq_pci = {
+ .name = "ltq_pci",
+ .num_resources = 0,
+};
+
+void __init ltq_register_pci(struct ltq_pci_data *data)
+{
+ ltq_pci.dev.platform_data = data;
+ platform_device_register(<q_pci);
+}
+#else
+void __init ltq_register_pci(struct ltq_pci_data *data)
+{
+ pr_err("kernel is compiled without PCI support\n");
+}
+#endif
diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
new file mode 100644
index 0000000..2947bb1
--- /dev/null
+++ b/arch/mips/lantiq/devices.h
@@ -0,0 +1,23 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEVICES_H__
+#define _LTQ_DEVICES_H__
+
+#include <lantiq_platform.h>
+#include <linux/mtd/physmap.h>
+
+#define IRQ_RES(resname, irq) \
+ {.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ}
+
+extern void ltq_register_nor(struct physmap_flash_data *data);
+extern void ltq_register_wdt(void);
+extern void ltq_register_asc(int port);
+extern void ltq_register_pci(struct ltq_pci_data *data);
+
+#endif
diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c
new file mode 100644
index 0000000..972e05f
--- /dev/null
+++ b/arch/mips/lantiq/early_printk.c
@@ -0,0 +1,33 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+
+#include <lantiq.h>
+#include <lantiq_soc.h>
+
+/* no ioremap possible at this early stage, lets use KSEG1 instead */
+#define LTQ_ASC_BASE KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
+#define ASC_BUF 1024
+#define LTQ_ASC_FSTAT ((u32 *)(LTQ_ASC_BASE + 0x0048))
+#define LTQ_ASC_TBUF ((u32 *)(LTQ_ASC_BASE + 0x0020))
+#define TXMASK 0x3F00
+#define TXOFFSET 8
+
+void prom_putchar(char c)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
+ if (c == '\n')
+ ltq_w32('\r', LTQ_ASC_TBUF);
+ ltq_w32(c, LTQ_ASC_TBUF);
+ local_irq_restore(flags);
+}
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
new file mode 100644
index 0000000..fc89795
--- /dev/null
+++ b/arch/mips/lantiq/irq.c
@@ -0,0 +1,326 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+/* register definitions */
+#define LTQ_ICU_IM0_ISR 0x0000
+#define LTQ_ICU_IM0_IER 0x0008
+#define LTQ_ICU_IM0_IOSR 0x0010
+#define LTQ_ICU_IM0_IRSR 0x0018
+#define LTQ_ICU_IM0_IMR 0x0020
+#define LTQ_ICU_IM1_ISR 0x0028
+#define LTQ_ICU_OFFSET (LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR)
+
+#define LTQ_EIU_EXIN_C 0x0000
+#define LTQ_EIU_EXIN_INIC 0x0004
+#define LTQ_EIU_EXIN_INEN 0x000C
+
+/* irq numbers used by the external interrupt unit (EIU) */
+#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30)
+#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31)
+#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26)
+#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0
+#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1)
+#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2)
+#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30)
+
+#define MAX_EIU 6
+
+/* irqs generated by device attached to the EBU need to be acked in
+ * a special manner
+ */
+#define LTQ_ICU_EBU_IRQ 22
+
+#define ltq_icu_w32(x, y) ltq_w32((x), ltq_icu_membase + (y))
+#define ltq_icu_r32(x) ltq_r32(ltq_icu_membase + (x))
+
+#define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y))
+#define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x))
+
+static unsigned short ltq_eiu_irq[MAX_EIU] = {
+ LTQ_EIU_IR0,
+ LTQ_EIU_IR1,
+ LTQ_EIU_IR2,
+ LTQ_EIU_IR3,
+ LTQ_EIU_IR4,
+ LTQ_EIU_IR5,
+};
+
+static struct resource ltq_icu_resource = {
+ .name = "icu",
+ .start = LTQ_ICU_BASE_ADDR,
+ .end = LTQ_ICU_BASE_ADDR + LTQ_ICU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource ltq_eiu_resource = {
+ .name = "eiu",
+ .start = LTQ_EIU_BASE_ADDR,
+ .end = LTQ_EIU_BASE_ADDR + LTQ_ICU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_icu_membase;
+static void __iomem *ltq_eiu_membase;
+
+void ltq_disable_irq(struct irq_data *d)
+{
+ u32 ier = LTQ_ICU_IM0_IER;
+ int irq_nr = d->irq - INT_NUM_IRQ0;
+
+ ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+ irq_nr %= INT_NUM_IM_OFFSET;
+ ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier);
+}
+
+void ltq_mask_and_ack_irq(struct irq_data *d)
+{
+ u32 ier = LTQ_ICU_IM0_IER;
+ u32 isr = LTQ_ICU_IM0_ISR;
+ int irq_nr = d->irq - INT_NUM_IRQ0;
+
+ ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+ isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+ irq_nr %= INT_NUM_IM_OFFSET;
+ ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier);
+ ltq_icu_w32((1 << irq_nr), isr);
+}
+
+static void ltq_ack_irq(struct irq_data *d)
+{
+ u32 isr = LTQ_ICU_IM0_ISR;
+ int irq_nr = d->irq - INT_NUM_IRQ0;
+
+ isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+ irq_nr %= INT_NUM_IM_OFFSET;
+ ltq_icu_w32((1 << irq_nr), isr);
+}
+
+void ltq_enable_irq(struct irq_data *d)
+{
+ u32 ier = LTQ_ICU_IM0_IER;
+ int irq_nr = d->irq - INT_NUM_IRQ0;
+
+ ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+ irq_nr %= INT_NUM_IM_OFFSET;
+ ltq_icu_w32(ltq_icu_r32(ier) | (1 << irq_nr), ier);
+}
+
+static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
+{
+ int i;
+ int irq_nr = d->irq - INT_NUM_IRQ0;
+
+ ltq_enable_irq(d);
+ for (i = 0; i < MAX_EIU; i++) {
+ if (irq_nr == ltq_eiu_irq[i]) {
+ /* low level - we should really handle set_type */
+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
+ (0x6 << (i * 4)), LTQ_EIU_EXIN_C);
+ /* clear all pending */
+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~(1 << i),
+ LTQ_EIU_EXIN_INIC);
+ /* enable */
+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | (1 << i),
+ LTQ_EIU_EXIN_INEN);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static void ltq_shutdown_eiu_irq(struct irq_data *d)
+{
+ int i;
+ int irq_nr = d->irq - INT_NUM_IRQ0;
+
+ ltq_disable_irq(d);
+ for (i = 0; i < MAX_EIU; i++) {
+ if (irq_nr == ltq_eiu_irq[i]) {
+ /* disable */
+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i),
+ LTQ_EIU_EXIN_INEN);
+ break;
+ }
+ }
+}
+
+static struct irq_chip ltq_irq_type = {
+ "icu",
+ .irq_enable = ltq_enable_irq,
+ .irq_disable = ltq_disable_irq,
+ .irq_unmask = ltq_enable_irq,
+ .irq_ack = ltq_ack_irq,
+ .irq_mask = ltq_disable_irq,
+ .irq_mask_ack = ltq_mask_and_ack_irq,
+};
+
+static struct irq_chip ltq_eiu_type = {
+ "eiu",
+ .irq_startup = ltq_startup_eiu_irq,
+ .irq_shutdown = ltq_shutdown_eiu_irq,
+ .irq_enable = ltq_enable_irq,
+ .irq_disable = ltq_disable_irq,
+ .irq_unmask = ltq_enable_irq,
+ .irq_ack = ltq_ack_irq,
+ .irq_mask = ltq_disable_irq,
+ .irq_mask_ack = ltq_mask_and_ack_irq,
+};
+
+static void ltq_hw_irqdispatch(int module)
+{
+ u32 irq;
+
+ irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET));
+ if (irq == 0)
+ return;
+
+ /* silicon bug causes only the msb set to 1 to be valid. all
+ * other bits might be bogus
+ */
+ irq = __fls(irq);
+ do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
+
+ /* if this is a EBU irq, we need to ack it or get a deadlock */
+ if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0))
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10,
+ LTQ_EBU_PCC_ISTAT);
+}
+
+#define DEFINE_HWx_IRQDISPATCH(x) \
+ static void ltq_hw ## x ## _irqdispatch(void) \
+ { \
+ ltq_hw_irqdispatch(x); \
+ }
+DEFINE_HWx_IRQDISPATCH(0)
+DEFINE_HWx_IRQDISPATCH(1)
+DEFINE_HWx_IRQDISPATCH(2)
+DEFINE_HWx_IRQDISPATCH(3)
+DEFINE_HWx_IRQDISPATCH(4)
+
+static void ltq_hw5_irqdispatch(void)
+{
+ do_IRQ(MIPS_CPU_TIMER_IRQ);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+ unsigned int i;
+
+ if (pending & CAUSEF_IP7) {
+ do_IRQ(MIPS_CPU_TIMER_IRQ);
+ goto out;
+ } else {
+ for (i = 0; i < 5; i++) {
+ if (pending & (CAUSEF_IP2 << i)) {
+ ltq_hw_irqdispatch(i);
+ goto out;
+ }
+ }
+ }
+ pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
+
+out:
+ return;
+}
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = IRQF_DISABLED,
+ .name = "cascade",
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ if (insert_resource(&iomem_resource, <q_icu_resource) < 0)
+ panic("Failed to insert icu memory\n");
+
+ if (request_mem_region(ltq_icu_resource.start,
+ resource_size(<q_icu_resource), "icu") < 0)
+ panic("Failed to request icu memory\n");
+
+ ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start,
+ resource_size(<q_icu_resource));
+ if (!ltq_icu_membase)
+ panic("Failed to remap icu memory\n");
+
+ if (insert_resource(&iomem_resource, <q_eiu_resource) < 0)
+ panic("Failed to insert eiu memory\n");
+
+ if (request_mem_region(ltq_eiu_resource.start,
+ resource_size(<q_eiu_resource), "eiu") < 0)
+ panic("Failed to request eiu memory\n");
+
+ ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
+ resource_size(<q_eiu_resource));
+ if (!ltq_eiu_membase)
+ panic("Failed to remap eiu memory\n");
+
+ /* make sure all irqs are turned off by default */
+ for (i = 0; i < 5; i++)
+ ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
+
+ /* clear all possibly pending interrupts */
+ ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+
+ mips_cpu_irq_init();
+
+ for (i = 2; i <= 6; i++)
+ setup_irq(i, &cascade);
+
+ if (cpu_has_vint) {
+ pr_info("Setting up vectored interrupts\n");
+ set_vi_handler(2, ltq_hw0_irqdispatch);
+ set_vi_handler(3, ltq_hw1_irqdispatch);
+ set_vi_handler(4, ltq_hw2_irqdispatch);
+ set_vi_handler(5, ltq_hw3_irqdispatch);
+ set_vi_handler(6, ltq_hw4_irqdispatch);
+ set_vi_handler(7, ltq_hw5_irqdispatch);
+ }
+
+ for (i = INT_NUM_IRQ0;
+ i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
+ if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) ||
+ (i == LTQ_EIU_IR2))
+ irq_set_chip_and_handler(i, <q_eiu_type,
+ handle_level_irq);
+ /* EIU3-5 only exist on ar9 and vr9 */
+ else if (((i == LTQ_EIU_IR3) || (i == LTQ_EIU_IR4) ||
+ (i == LTQ_EIU_IR5)) && (ltq_is_ar9() || ltq_is_vr9()))
+ irq_set_chip_and_handler(i, <q_eiu_type,
+ handle_level_irq);
+ else
+ irq_set_chip_and_handler(i, <q_irq_type,
+ handle_level_irq);
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+ set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
+ IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+#else
+ set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
+ IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+#endif
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
new file mode 100644
index 0000000..7e01b8c
--- /dev/null
+++ b/arch/mips/lantiq/machtypes.h
@@ -0,0 +1,20 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_MACH_H__
+#define _LANTIQ_MACH_H__
+
+#include <asm/mips_machine.h>
+
+enum lantiq_mach_type {
+ LTQ_MACH_GENERIC = 0,
+ LTQ_MACH_EASY50712, /* Danube evaluation board */
+ LTQ_MACH_EASY50601, /* Amazon SE evaluation board */
+};
+
+#endif
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
new file mode 100644
index 0000000..56ba007
--- /dev/null
+++ b/arch/mips/lantiq/prom.c
@@ -0,0 +1,71 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq.h>
+
+#include "prom.h"
+#include "clk.h"
+
+static struct ltq_soc_info soc_info;
+
+unsigned int ltq_get_cpu_ver(void)
+{
+ return soc_info.rev;
+}
+EXPORT_SYMBOL(ltq_get_cpu_ver);
+
+unsigned int ltq_get_soc_type(void)
+{
+ return soc_info.type;
+}
+EXPORT_SYMBOL(ltq_get_soc_type);
+
+const char *get_system_type(void)
+{
+ return soc_info.sys_type;
+}
+
+void prom_free_prom_memory(void)
+{
+}
+
+static void __init prom_init_cmdline(void)
+{
+ int argc = fw_arg0;
+ char **argv = (char **) KSEG1ADDR(fw_arg1);
+ int i;
+
+ for (i = 0; i < argc; i++) {
+ char *p = (char *) KSEG1ADDR(argv[i]);
+
+ if (p && *p) {
+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+ }
+ }
+}
+
+void __init prom_init(void)
+{
+ struct clk *clk;
+
+ ltq_soc_detect(&soc_info);
+ clk_init();
+ clk = clk_get(0, "cpu");
+ snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
+ soc_info.name, soc_info.rev);
+ clk_put(clk);
+ soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+ pr_info("SoC: %s\n", soc_info.sys_type);
+ prom_init_cmdline();
+}
diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
new file mode 100644
index 0000000..b4229d9
--- /dev/null
+++ b/arch/mips/lantiq/prom.h
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_PROM_H__
+#define _LTQ_PROM_H__
+
+#define LTQ_SYS_TYPE_LEN 0x100
+
+struct ltq_soc_info {
+ unsigned char *name;
+ unsigned int rev;
+ unsigned int partnum;
+ unsigned int type;
+ unsigned char sys_type[LTQ_SYS_TYPE_LEN];
+};
+
+extern void ltq_soc_detect(struct ltq_soc_info *i);
+extern void ltq_soc_setup(void);
+
+#endif
diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c
new file mode 100644
index 0000000..9b8af77
--- /dev/null
+++ b/arch/mips/lantiq/setup.c
@@ -0,0 +1,66 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <asm/bootinfo.h>
+
+#include <lantiq_soc.h>
+
+#include "machtypes.h"
+#include "devices.h"
+#include "prom.h"
+
+void __init plat_mem_setup(void)
+{
+ /* assume 16M as default incase uboot fails to pass proper ramsize */
+ unsigned long memsize = 16;
+ char **envp = (char **) KSEG1ADDR(fw_arg2);
+
+ ioport_resource.start = IOPORT_RESOURCE_START;
+ ioport_resource.end = IOPORT_RESOURCE_END;
+ iomem_resource.start = IOMEM_RESOURCE_START;
+ iomem_resource.end = IOMEM_RESOURCE_END;
+
+ set_io_port_base((unsigned long) KSEG1);
+
+ while (*envp) {
+ char *e = (char *)KSEG1ADDR(*envp);
+ if (!strncmp(e, "memsize=", 8)) {
+ e += 8;
+ if (strict_strtoul(e, 0, &memsize))
+ pr_warn("bad memsize specified\n");
+ }
+ envp++;
+ }
+ memsize *= 1024 * 1024;
+ add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+}
+
+static int __init
+lantiq_setup(void)
+{
+ ltq_soc_setup();
+ mips_machine_setup();
+ return 0;
+}
+
+arch_initcall(lantiq_setup);
+
+static void __init
+lantiq_generic_init(void)
+{
+ /* Nothing to do */
+}
+
+MIPS_MACHINE(LTQ_MACH_GENERIC,
+ "Generic",
+ "Generic Lantiq based board",
+ lantiq_generic_init);
diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
new file mode 100644
index 0000000..2b857de
--- /dev/null
+++ b/arch/mips/lantiq/xway/Kconfig
@@ -0,0 +1,23 @@
+if SOC_XWAY
+
+menu "MIPS Machine"
+
+config LANTIQ_MACH_EASY50712
+ bool "Easy50712 - Danube"
+ default y
+
+endmenu
+
+endif
+
+if SOC_AMAZON_SE
+
+menu "MIPS Machine"
+
+config LANTIQ_MACH_EASY50601
+ bool "Easy50601 - Amazon SE"
+ default y
+
+endmenu
+
+endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
new file mode 100644
index 0000000..c517f2e
--- /dev/null
+++ b/arch/mips/lantiq/xway/Makefile
@@ -0,0 +1,7 @@
+obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
+
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
+
+obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
new file mode 100644
index 0000000..22d823a
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-ase.c
@@ -0,0 +1,48 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+/* cgu registers */
+#define LTQ_CGU_SYS 0x0010
+
+unsigned int ltq_get_io_region_clock(void)
+{
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+ if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+ return CLOCK_266M;
+ else
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
new file mode 100644
index 0000000..ddd3959
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-xway.c
@@ -0,0 +1,223 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int ltq_ram_clocks[] = {
+ CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+
+#define BASIC_FREQUENCY_1 35328000
+#define BASIC_FREQUENCY_2 36000000
+#define BASIS_REQUENCY_USB 12000000
+
+#define GET_BITS(x, msb, lsb) \
+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define LTQ_CGU_PLL0_CFG 0x0004
+#define LTQ_CGU_PLL1_CFG 0x0008
+#define LTQ_CGU_PLL2_CFG 0x000C
+#define LTQ_CGU_SYS 0x0010
+#define LTQ_CGU_UPDATE 0x0014
+#define LTQ_CGU_IF_CLK 0x0018
+#define LTQ_CGU_OSC_CON 0x001C
+#define LTQ_CGU_SMD 0x0020
+#define LTQ_CGU_CT1SR 0x0028
+#define LTQ_CGU_CT2SR 0x002C
+#define LTQ_CGU_PCMCR 0x0030
+#define LTQ_CGU_PCI_CR 0x0034
+#define LTQ_CGU_PD_PC 0x0038
+#define LTQ_CGU_FMR 0x003C
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC \
+ (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
+ (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_SYS_FPI_SEL (1 << 6)
+#define CGU_SYS_DDR_SEL 0x3
+#define CGU_PLL0_SRC (1 << 29)
+
+#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+
+static unsigned int ltq_get_pll0_fdiv(void);
+
+static inline unsigned int get_input_clock(int pll)
+{
+ switch (pll) {
+ case 0:
+ if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+ return BASIS_REQUENCY_USB;
+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+ return BASIC_FREQUENCY_1;
+ else
+ return BASIC_FREQUENCY_2;
+ case 1:
+ if (CGU_PLL1_SRC)
+ return BASIS_REQUENCY_USB;
+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+ return BASIC_FREQUENCY_1;
+ else
+ return BASIC_FREQUENCY_2;
+ case 2:
+ switch (CGU_PLL2_SRC) {
+ case 0:
+ return ltq_get_pll0_fdiv();
+ case 1:
+ return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+ BASIC_FREQUENCY_1 :
+ BASIC_FREQUENCY_2;
+ case 2:
+ return BASIS_REQUENCY_USB;
+ }
+ default:
+ return 0;
+ }
+}
+
+static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
+{
+ u64 res, clock = get_input_clock(pll);
+
+ res = num * clock;
+ do_div(res, den);
+ return res;
+}
+
+static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
+ unsigned int K)
+{
+ unsigned int num = ((N + 1) << 10) + K;
+ unsigned int den = (M + 1) << 10;
+
+ return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
+ unsigned int K)
+{
+ unsigned int num = ((N + 1) << 11) + K + 512;
+ unsigned int den = (M + 1) << 11;
+
+ return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
+ unsigned int K)
+{
+ unsigned int num = K >= 512 ?
+ ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+ unsigned int den = (M + 1) << 12;
+
+ return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
+ unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
+{
+ if (!dsmsel)
+ return mash_dsm(pll, M, N, K);
+ else if (!phase_div_en)
+ return mash_dsm(pll, M, N, K);
+ else
+ return ssff_dsm_2(pll, M, N, K);
+}
+
+static inline unsigned int ltq_get_pll0_fosc(void)
+{
+ if (CGU_PLL0_BYPASS)
+ return get_input_clock(0);
+ else
+ return !CGU_PLL0_CFG_FRAC_EN
+ ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+ CGU_PLL0_CFG_DSMSEL,
+ CGU_PLL0_PHASE_DIVIDER_ENABLE)
+ : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+ CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+ CGU_PLL0_PHASE_DIVIDER_ENABLE);
+}
+
+static unsigned int ltq_get_pll0_fdiv(void)
+{
+ unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+
+ return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+}
+
+unsigned int ltq_get_io_region_clock(void)
+{
+ unsigned int ret = ltq_get_pll0_fosc();
+
+ switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+ default:
+ case 0:
+ return (ret + 1) / 2;
+ case 1:
+ return (ret * 2 + 2) / 5;
+ case 2:
+ return (ret + 1) / 3;
+ case 3:
+ return (ret + 2) / 4;
+ }
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+ unsigned int ret = ltq_get_io_region_clock();
+
+ if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+ ret >>= 1;
+ return ret;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+ case 0:
+ return CLOCK_333M;
+ case 4:
+ return DDR_HZ;
+ case 8:
+ return DDR_HZ << 1;
+ default:
+ return DDR_HZ >> 1;
+ }
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+ unsigned int ddr_clock = DDR_HZ;
+
+ if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+ return ddr_clock >> 1;
+ return ddr_clock;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
new file mode 100644
index 0000000..e09e789
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.c
@@ -0,0 +1,121 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#include "devices.h"
+
+/* gpio */
+static struct resource ltq_gpio_resource[] = {
+ {
+ .name = "gpio0",
+ .start = LTQ_GPIO0_BASE_ADDR,
+ .end = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "gpio1",
+ .start = LTQ_GPIO1_BASE_ADDR,
+ .end = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "gpio2",
+ .start = LTQ_GPIO2_BASE_ADDR,
+ .end = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+void __init ltq_register_gpio(void)
+{
+ platform_device_register_simple("ltq_gpio", 0,
+ <q_gpio_resource[0], 1);
+ platform_device_register_simple("ltq_gpio", 1,
+ <q_gpio_resource[1], 1);
+
+ /* AR9 and VR9 have an extra gpio block */
+ if (ltq_is_ar9() || ltq_is_vr9()) {
+ platform_device_register_simple("ltq_gpio", 2,
+ <q_gpio_resource[2], 1);
+ }
+}
+
+/* serial to parallel conversion */
+static struct resource ltq_stp_resource = {
+ .name = "stp",
+ .start = LTQ_STP_BASE_ADDR,
+ .end = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+void __init ltq_register_gpio_stp(void)
+{
+ platform_device_register_simple("ltq_stp", 0, <q_stp_resource, 1);
+}
+
+/* asc ports - amazon se has its own serial mapping */
+static struct resource ltq_ase_asc_resources[] = {
+ {
+ .name = "asc0",
+ .start = LTQ_ASC1_BASE_ADDR,
+ .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ_RES(tx, LTQ_ASC_ASE_TIR),
+ IRQ_RES(rx, LTQ_ASC_ASE_RIR),
+ IRQ_RES(err, LTQ_ASC_ASE_EIR),
+};
+
+void __init ltq_register_ase_asc(void)
+{
+ platform_device_register_simple("ltq_asc", 0,
+ ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
+}
+
+/* ethernet */
+static struct resource ltq_etop_resources = {
+ .name = "etop",
+ .start = LTQ_ETOP_BASE_ADDR,
+ .end = LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ltq_etop = {
+ .name = "ltq_etop",
+ .resource = <q_etop_resources,
+ .num_resources = 1,
+};
+
+void __init
+ltq_register_etop(struct ltq_eth_data *eth)
+{
+ if (eth) {
+ ltq_etop.dev.platform_data = eth;
+ platform_device_register(<q_etop);
+ }
+}
diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
new file mode 100644
index 0000000..e904934
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.h
@@ -0,0 +1,20 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEVICES_XWAY_H__
+#define _LTQ_DEVICES_XWAY_H__
+
+#include "../devices.h"
+#include <linux/phy.h>
+
+extern void ltq_register_gpio(void);
+extern void ltq_register_gpio_stp(void);
+extern void ltq_register_ase_asc(void);
+extern void ltq_register_etop(struct ltq_eth_data *eth);
+
+#endif
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
new file mode 100644
index 0000000..4278a45
--- /dev/null
+++ b/arch/mips/lantiq/xway/dma.c
@@ -0,0 +1,253 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+
+#define LTQ_DMA_CTRL 0x10
+#define LTQ_DMA_CPOLL 0x14
+#define LTQ_DMA_CS 0x18
+#define LTQ_DMA_CCTRL 0x1C
+#define LTQ_DMA_CDBA 0x20
+#define LTQ_DMA_CDLEN 0x24
+#define LTQ_DMA_CIS 0x28
+#define LTQ_DMA_CIE 0x2C
+#define LTQ_DMA_PS 0x40
+#define LTQ_DMA_PCTRL 0x44
+#define LTQ_DMA_IRNEN 0xf4
+
+#define DMA_DESCPT BIT(3) /* descriptor complete irq */
+#define DMA_TX BIT(8) /* TX channel direction */
+#define DMA_CHAN_ON BIT(0) /* channel on / off bit */
+#define DMA_PDEN BIT(6) /* enable packet drop */
+#define DMA_CHAN_RST BIT(1) /* channel on / off bit */
+#define DMA_RESET BIT(0) /* channel on / off bit */
+#define DMA_IRQ_ACK 0x7e /* IRQ status register */
+#define DMA_POLL BIT(31) /* turn on channel polling */
+#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
+#define DMA_2W_BURST BIT(1) /* 2 word burst length */
+#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
+#define DMA_ETOP_ENDIANESS (0xf << 8) /* endianess swap etop channels */
+#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
+
+#define ltq_dma_r32(x) ltq_r32(ltq_dma_membase + (x))
+#define ltq_dma_w32(x, y) ltq_w32(x, ltq_dma_membase + (y))
+#define ltq_dma_w32_mask(x, y, z) ltq_w32_mask(x, y, \
+ ltq_dma_membase + (z))
+
+static struct resource ltq_dma_resource = {
+ .name = "dma",
+ .start = LTQ_DMA_BASE_ADDR,
+ .end = LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_dma_membase;
+
+void
+ltq_dma_enable_irq(struct ltq_dma_channel *ch)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_enable_irq);
+
+void
+ltq_dma_disable_irq(struct ltq_dma_channel *ch)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+ ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_disable_irq);
+
+void
+ltq_dma_ack_irq(struct ltq_dma_channel *ch)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+ ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_ack_irq);
+
+void
+ltq_dma_open(struct ltq_dma_channel *ch)
+{
+ unsigned long flag;
+
+ local_irq_save(flag);
+ ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+ ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
+ ltq_dma_enable_irq(ch);
+ local_irq_restore(flag);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_open);
+
+void
+ltq_dma_close(struct ltq_dma_channel *ch)
+{
+ unsigned long flag;
+
+ local_irq_save(flag);
+ ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+ ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+ ltq_dma_disable_irq(ch);
+ local_irq_restore(flag);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_close);
+
+static void
+ltq_dma_alloc(struct ltq_dma_channel *ch)
+{
+ unsigned long flags;
+
+ ch->desc = 0;
+ ch->desc_base = dma_alloc_coherent(NULL,
+ LTQ_DESC_NUM * LTQ_DESC_SIZE,
+ &ch->phys, GFP_ATOMIC);
+ memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE);
+
+ local_irq_save(flags);
+ ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+ ltq_dma_w32(ch->phys, LTQ_DMA_CDBA);
+ ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN);
+ ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+ wmb();
+ ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL);
+ while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST)
+ ;
+ local_irq_restore(flags);
+}
+
+void
+ltq_dma_alloc_tx(struct ltq_dma_channel *ch)
+{
+ unsigned long flags;
+
+ ltq_dma_alloc(ch);
+
+ local_irq_save(flags);
+ ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
+ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+ ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx);
+
+void
+ltq_dma_alloc_rx(struct ltq_dma_channel *ch)
+{
+ unsigned long flags;
+
+ ltq_dma_alloc(ch);
+
+ local_irq_save(flags);
+ ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
+ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+ ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx);
+
+void
+ltq_dma_free(struct ltq_dma_channel *ch)
+{
+ if (!ch->desc_base)
+ return;
+ ltq_dma_close(ch);
+ dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE,
+ ch->desc_base, ch->phys);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_free);
+
+void
+ltq_dma_init_port(int p)
+{
+ ltq_dma_w32(p, LTQ_DMA_PS);
+ switch (p) {
+ case DMA_PORT_ETOP:
+ /*
+ * Tell the DMA engine to swap the endianess of data frames and
+ * drop packets if the channel arbitration fails.
+ */
+ ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN,
+ LTQ_DMA_PCTRL);
+ break;
+
+ case DMA_PORT_DEU:
+ ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
+ LTQ_DMA_PCTRL);
+ break;
+
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(ltq_dma_init_port);
+
+int __init
+ltq_dma_init(void)
+{
+ int i;
+
+ /* insert and request the memory region */
+ if (insert_resource(&iomem_resource, <q_dma_resource) < 0)
+ panic("Failed to insert dma memory\n");
+
+ if (request_mem_region(ltq_dma_resource.start,
+ resource_size(<q_dma_resource), "dma") < 0)
+ panic("Failed to request dma memory\n");
+
+ /* remap dma register range */
+ ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start,
+ resource_size(<q_dma_resource));
+ if (!ltq_dma_membase)
+ panic("Failed to remap dma memory\n");
+
+ /* power up and reset the dma engine */
+ ltq_pmu_enable(PMU_DMA);
+ ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+
+ /* disable all interrupts */
+ ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
+ /* reset/configure each channel */
+ for (i = 0; i < DMA_MAX_CHANNEL; i++) {
+ ltq_dma_w32(i, LTQ_DMA_CS);
+ ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
+ ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
+ ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+ }
+ return 0;
+}
+
+postcore_initcall(ltq_dma_init);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
new file mode 100644
index 0000000..66eb52f
--- /dev/null
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -0,0 +1,53 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * EBU - the external bus unit attaches PCI, NOR and NAND
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* all access to the ebu must be locked */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
+
+static struct resource ltq_ebu_resource = {
+ .name = "ebu",
+ .start = LTQ_EBU_BASE_ADDR,
+ .end = LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+/* remapped base addr of the clock unit and external bus unit */
+void __iomem *ltq_ebu_membase;
+
+static int __init lantiq_ebu_init(void)
+{
+ /* insert and request the memory region */
+ if (insert_resource(&iomem_resource, <q_ebu_resource) < 0)
+ panic("Failed to insert ebu memory\n");
+
+ if (request_mem_region(ltq_ebu_resource.start,
+ resource_size(<q_ebu_resource), "ebu") < 0)
+ panic("Failed to request ebu memory\n");
+
+ /* remap ebu register range */
+ ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start,
+ resource_size(<q_ebu_resource));
+ if (!ltq_ebu_membase)
+ panic("Failed to remap ebu memory\n");
+
+ /* make sure to unprotect the memory region where flash is located */
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+ return 0;
+}
+
+postcore_initcall(lantiq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
new file mode 100644
index 0000000..a321451
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -0,0 +1,195 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_GPIO_OUT 0x00
+#define LTQ_GPIO_IN 0x04
+#define LTQ_GPIO_DIR 0x08
+#define LTQ_GPIO_ALTSEL0 0x0C
+#define LTQ_GPIO_ALTSEL1 0x10
+#define LTQ_GPIO_OD 0x14
+
+#define PINS_PER_PORT 16
+#define MAX_PORTS 3
+
+#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
+#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r)
+#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r)
+
+struct ltq_gpio {
+ void __iomem *membase;
+ struct gpio_chip chip;
+};
+
+static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
+
+int gpio_to_irq(unsigned int gpio)
+{
+ return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned int gpio)
+{
+ return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+ unsigned int alt1, unsigned int dir, const char *name)
+{
+ int id = 0;
+
+ if (pin >= (MAX_PORTS * PINS_PER_PORT))
+ return -EINVAL;
+ if (gpio_request(pin, name)) {
+ pr_err("failed to setup lantiq gpio: %s\n", name);
+ return -EBUSY;
+ }
+ if (dir)
+ gpio_direction_output(pin, 1);
+ else
+ gpio_direction_input(pin);
+ while (pin >= PINS_PER_PORT) {
+ pin -= PINS_PER_PORT;
+ id++;
+ }
+ if (alt0)
+ ltq_gpio_setbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL0, pin);
+ else
+ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL0, pin);
+ if (alt1)
+ ltq_gpio_setbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL1, pin);
+ else
+ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL1, pin);
+ return 0;
+}
+EXPORT_SYMBOL(ltq_gpio_request);
+
+static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ if (value)
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+ else
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+}
+
+static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset);
+}
+
+static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+
+ return 0;
+}
+
+static int ltq_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+ ltq_gpio_set(chip, offset, value);
+
+ return 0;
+}
+
+static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+ return 0;
+}
+
+static int ltq_gpio_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ if (pdev->id >= MAX_PORTS) {
+ dev_err(&pdev->dev, "invalid gpio port %d\n",
+ pdev->id);
+ return -EINVAL;
+ }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+ pdev->id);
+ return -ENOENT;
+ }
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev,
+ "failed to request memory for gpio port %d\n",
+ pdev->id);
+ return -EBUSY;
+ }
+ ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev,
+ res->start, resource_size(res));
+ if (!ltq_gpio_port[pdev->id].membase) {
+ dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n",
+ pdev->id);
+ return -ENOMEM;
+ }
+ ltq_gpio_port[pdev->id].chip.label = "ltq_gpio";
+ ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input;
+ ltq_gpio_port[pdev->id].chip.direction_output =
+ ltq_gpio_direction_output;
+ ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get;
+ ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+ ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+ ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+ ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+ platform_set_drvdata(pdev, <q_gpio_port[pdev->id]);
+ return gpiochip_add(<q_gpio_port[pdev->id].chip);
+}
+
+static struct platform_driver
+ltq_gpio_driver = {
+ .probe = ltq_gpio_probe,
+ .driver = {
+ .name = "ltq_gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init ltq_gpio_init(void)
+{
+ int ret = platform_driver_register(<q_gpio_driver);
+
+ if (ret)
+ pr_info("ltq_gpio : Error registering platfom driver!");
+ return ret;
+}
+
+postcore_initcall(ltq_gpio_init);
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
new file mode 100644
index 0000000..a479355
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -0,0 +1,126 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * By attaching hardware latches to the EBU it is possible to create output
+ * only gpios. This driver configures a special memory address, which when
+ * written to outputs 16 bit to the latches.
+ */
+
+#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */
+#define LTQ_EBU_WP 0x80000000 /* write protect bit */
+
+/* we keep a shadow value of the last value written to the ebu */
+static int ltq_ebu_gpio_shadow = 0x0;
+static void __iomem *ltq_ebu_gpio_membase;
+
+static void ltq_ebu_apply(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+ ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
+ *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;
+ ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+ spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ ltq_ebu_gpio_shadow |= (1 << offset);
+ else
+ ltq_ebu_gpio_shadow &= ~(1 << offset);
+ ltq_ebu_apply();
+}
+
+static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ ltq_ebu_set(chip, offset, value);
+
+ return 0;
+}
+
+static struct gpio_chip ltq_ebu_chip = {
+ .label = "ltq_ebu",
+ .direction_output = ltq_ebu_direction_output,
+ .set = ltq_ebu_set,
+ .base = 72,
+ .ngpio = 16,
+ .can_sleep = 1,
+ .owner = THIS_MODULE,
+};
+
+static int ltq_ebu_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get memory resource\n");
+ return -ENOENT;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ return -EBUSY;
+ }
+
+ ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!ltq_ebu_gpio_membase) {
+ dev_err(&pdev->dev, "Failed to ioremap mem region\n");
+ return -ENOMEM;
+ }
+
+ /* grab the default shadow value passed form the platform code */
+ ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;
+
+ /* tell the ebu controller which memory address we will be using */
+ ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);
+
+ /* write protect the region */
+ ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+
+ ret = gpiochip_add(<q_ebu_chip);
+ if (!ret)
+ ltq_ebu_apply();
+ return ret;
+}
+
+static struct platform_driver ltq_ebu_driver = {
+ .probe = ltq_ebu_probe,
+ .driver = {
+ .name = "ltq_ebu",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ltq_ebu_init(void)
+{
+ int ret = platform_driver_register(<q_ebu_driver);
+
+ if (ret)
+ pr_info("ltq_ebu : Error registering platfom driver!");
+ return ret;
+}
+
+postcore_initcall(ltq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
new file mode 100644
index 0000000..67d59d6
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -0,0 +1,157 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_STP_CON0 0x00
+#define LTQ_STP_CON1 0x04
+#define LTQ_STP_CPU0 0x08
+#define LTQ_STP_CPU1 0x0C
+#define LTQ_STP_AR 0x10
+
+#define LTQ_STP_CON_SWU (1 << 31)
+#define LTQ_STP_2HZ 0
+#define LTQ_STP_4HZ (1 << 23)
+#define LTQ_STP_8HZ (2 << 23)
+#define LTQ_STP_10HZ (3 << 23)
+#define LTQ_STP_SPEED_MASK (0xf << 23)
+#define LTQ_STP_UPD_FPI (1 << 31)
+#define LTQ_STP_UPD_MASK (3 << 30)
+#define LTQ_STP_ADSL_SRC (3 << 24)
+
+#define LTQ_STP_GROUP0 (1 << 0)
+
+#define LTQ_STP_RISING 0
+#define LTQ_STP_FALLING (1 << 26)
+#define LTQ_STP_EDGE_MASK (1 << 26)
+
+#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg)
+#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg)
+#define ltq_stp_w32_mask(clear, set, reg) \
+ ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \
+ ltq_stp_membase + (reg))
+
+static int ltq_stp_shadow = 0xffff;
+static void __iomem *ltq_stp_membase;
+
+static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ ltq_stp_shadow |= (1 << offset);
+ else
+ ltq_stp_shadow &= ~(1 << offset);
+ ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
+}
+
+static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ ltq_stp_set(chip, offset, value);
+
+ return 0;
+}
+
+static struct gpio_chip ltq_stp_chip = {
+ .label = "ltq_stp",
+ .direction_output = ltq_stp_direction_output,
+ .set = ltq_stp_set,
+ .base = 48,
+ .ngpio = 24,
+ .can_sleep = 1,
+ .owner = THIS_MODULE,
+};
+
+static int ltq_stp_hw_init(void)
+{
+ /* the 3 pins used to control the external stp */
+ ltq_gpio_request(4, 1, 0, 1, "stp-st");
+ ltq_gpio_request(5, 1, 0, 1, "stp-d");
+ ltq_gpio_request(6, 1, 0, 1, "stp-sh");
+
+ /* sane defaults */
+ ltq_stp_w32(0, LTQ_STP_AR);
+ ltq_stp_w32(0, LTQ_STP_CPU0);
+ ltq_stp_w32(0, LTQ_STP_CPU1);
+ ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0);
+ ltq_stp_w32(0, LTQ_STP_CON1);
+
+ /* rising or falling edge */
+ ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
+
+ /* per default stp 15-0 are set */
+ ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
+
+ /* stp are update periodically by the FPI bus */
+ ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+
+ /* set stp update speed */
+ ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
+
+ /* tell the hardware that pin (led) 0 and 1 are controlled
+ * by the dsl arc
+ */
+ ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
+
+ ltq_pmu_enable(PMU_LED);
+ return 0;
+}
+
+static int __devinit ltq_stp_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret = 0;
+
+ if (!res)
+ return -ENOENT;
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request STP memory\n");
+ return -EBUSY;
+ }
+ ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!ltq_stp_membase) {
+ dev_err(&pdev->dev, "failed to remap STP memory\n");
+ return -ENOMEM;
+ }
+ ret = gpiochip_add(<q_stp_chip);
+ if (!ret)
+ ret = ltq_stp_hw_init();
+
+ return ret;
+}
+
+static struct platform_driver ltq_stp_driver = {
+ .probe = ltq_stp_probe,
+ .driver = {
+ .name = "ltq_stp",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init ltq_stp_init(void)
+{
+ int ret = platform_driver_register(<q_stp_driver);
+
+ if (ret)
+ pr_info("ltq_stp: error registering platfom driver");
+ return ret;
+}
+
+postcore_initcall(ltq_stp_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
new file mode 100644
index 0000000..d5aaf63
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50601.c
@@ -0,0 +1,57 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50601_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0x0,
+ .size = 0x10000,
+ },
+ {
+ .name = "uboot_env",
+ .offset = 0x10000,
+ .size = 0x10000,
+ },
+ {
+ .name = "linux",
+ .offset = 0x20000,
+ .size = 0xE0000,
+ },
+ {
+ .name = "rootfs",
+ .offset = 0x100000,
+ .size = 0x300000,
+ },
+};
+
+static struct physmap_flash_data easy50601_flash_data = {
+ .nr_parts = ARRAY_SIZE(easy50601_partitions),
+ .parts = easy50601_partitions,
+};
+
+static void __init easy50601_init(void)
+{
+ ltq_register_nor(&easy50601_flash_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50601,
+ "EASY50601",
+ "EASY50601 Eval Board",
+ easy50601_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
new file mode 100644
index 0000000..ea5027b
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -0,0 +1,74 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50712_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0x0,
+ .size = 0x10000,
+ },
+ {
+ .name = "uboot_env",
+ .offset = 0x10000,
+ .size = 0x10000,
+ },
+ {
+ .name = "linux",
+ .offset = 0x20000,
+ .size = 0xe0000,
+ },
+ {
+ .name = "rootfs",
+ .offset = 0x100000,
+ .size = 0x300000,
+ },
+};
+
+static struct physmap_flash_data easy50712_flash_data = {
+ .nr_parts = ARRAY_SIZE(easy50712_partitions),
+ .parts = easy50712_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+ .clock = PCI_CLOCK_INT,
+ .gpio = PCI_GNT1 | PCI_REQ1,
+ .irq = {
+ [14] = INT_NUM_IM0_IRL0 + 22,
+ },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+ .mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static void __init easy50712_init(void)
+{
+ ltq_register_gpio_stp();
+ ltq_register_nor(&easy50712_flash_data);
+ ltq_register_pci(<q_pci_data);
+ ltq_register_etop(<q_eth_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50712,
+ "EASY50712",
+ "EASY50712 Eval Board",
+ easy50712_init);
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
new file mode 100644
index 0000000..9d69f01e
--- /dev/null
+++ b/arch/mips/lantiq/xway/pmu.c
@@ -0,0 +1,70 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* PMU - the power management unit allows us to turn part of the core
+ * on and off
+ */
+
+/* the enable / disable registers */
+#define LTQ_PMU_PWDCR 0x1C
+#define LTQ_PMU_PWDSR 0x20
+
+#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
+#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
+
+static struct resource ltq_pmu_resource = {
+ .name = "pmu",
+ .start = LTQ_PMU_BASE_ADDR,
+ .end = LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_pmu_membase;
+
+void ltq_pmu_enable(unsigned int module)
+{
+ int err = 1000000;
+
+ ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+ do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
+
+ if (!err)
+ panic("activating PMU module failed!\n");
+}
+EXPORT_SYMBOL(ltq_pmu_enable);
+
+void ltq_pmu_disable(unsigned int module)
+{
+ ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
+}
+EXPORT_SYMBOL(ltq_pmu_disable);
+
+int __init ltq_pmu_init(void)
+{
+ if (insert_resource(&iomem_resource, <q_pmu_resource) < 0)
+ panic("Failed to insert pmu memory\n");
+
+ if (request_mem_region(ltq_pmu_resource.start,
+ resource_size(<q_pmu_resource), "pmu") < 0)
+ panic("Failed to request pmu memory\n");
+
+ ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start,
+ resource_size(<q_pmu_resource));
+ if (!ltq_pmu_membase)
+ panic("Failed to remap pmu memory\n");
+ return 0;
+}
+
+core_initcall(ltq_pmu_init);
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
new file mode 100644
index 0000000..abe49f4
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -0,0 +1,39 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_AMAZON_SE "Amazon_SE"
+
+#define PART_SHIFT 12
+#define PART_MASK 0x0FFFFFFF
+#define REV_SHIFT 28
+#define REV_MASK 0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+ i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+ i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+ switch (i->partnum) {
+ case SOC_ID_AMAZON_SE:
+ i->name = SOC_AMAZON_SE;
+ i->type = SOC_TYPE_AMAZON_SE;
+ break;
+
+ default:
+ unreachable();
+ break;
+ }
+}
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
new file mode 100644
index 0000000..1686692a
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -0,0 +1,54 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_DANUBE "Danube"
+#define SOC_TWINPASS "Twinpass"
+#define SOC_AR9 "AR9"
+
+#define PART_SHIFT 12
+#define PART_MASK 0x0FFFFFFF
+#define REV_SHIFT 28
+#define REV_MASK 0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+ i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+ i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+ switch (i->partnum) {
+ case SOC_ID_DANUBE1:
+ case SOC_ID_DANUBE2:
+ i->name = SOC_DANUBE;
+ i->type = SOC_TYPE_DANUBE;
+ break;
+
+ case SOC_ID_TWINPASS:
+ i->name = SOC_TWINPASS;
+ i->type = SOC_TYPE_DANUBE;
+ break;
+
+ case SOC_ID_ARX188:
+ case SOC_ID_ARX168:
+ case SOC_ID_ARX182:
+ i->name = SOC_AR9;
+ i->type = SOC_TYPE_AR9;
+ break;
+
+ default:
+ unreachable();
+ break;
+ }
+}
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
new file mode 100644
index 0000000..a1be36d
--- /dev/null
+++ b/arch/mips/lantiq/xway/reset.c
@@ -0,0 +1,91 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/module.h>
+#include <asm/reboot.h>
+
+#include <lantiq_soc.h>
+
+#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y))
+#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x))
+
+/* register definitions */
+#define LTQ_RCU_RST 0x0010
+#define LTQ_RCU_RST_ALL 0x40000000
+
+#define LTQ_RCU_RST_STAT 0x0014
+#define LTQ_RCU_STAT_SHIFT 26
+
+static struct resource ltq_rcu_resource = {
+ .name = "rcu",
+ .start = LTQ_RCU_BASE_ADDR,
+ .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+/* remapped base addr of the reset control unit */
+static void __iomem *ltq_rcu_membase;
+
+/* This function is used by the watchdog driver */
+int ltq_reset_cause(void)
+{
+ u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
+ return val >> LTQ_RCU_STAT_SHIFT;
+}
+EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
+static void ltq_machine_restart(char *command)
+{
+ pr_notice("System restart\n");
+ local_irq_disable();
+ ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+ unreachable();
+}
+
+static void ltq_machine_halt(void)
+{
+ pr_notice("System halted.\n");
+ local_irq_disable();
+ unreachable();
+}
+
+static void ltq_machine_power_off(void)
+{
+ pr_notice("Please turn off the power now.\n");
+ local_irq_disable();
+ unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+ /* insert and request the memory region */
+ if (insert_resource(&iomem_resource, <q_rcu_resource) < 0)
+ panic("Failed to insert rcu memory\n");
+
+ if (request_mem_region(ltq_rcu_resource.start,
+ resource_size(<q_rcu_resource), "rcu") < 0)
+ panic("Failed to request rcu memory\n");
+
+ /* remap rcu register range */
+ ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
+ resource_size(<q_rcu_resource));
+ if (!ltq_rcu_membase)
+ panic("Failed to remap rcu memory\n");
+
+ _machine_restart = ltq_machine_restart;
+ _machine_halt = ltq_machine_halt;
+ pm_power_off = ltq_machine_power_off;
+
+ return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c
new file mode 100644
index 0000000..f6f3267
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-ase.c
@@ -0,0 +1,19 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+ ltq_register_ase_asc();
+ ltq_register_gpio();
+ ltq_register_wdt();
+}
diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c
new file mode 100644
index 0000000..c292f64
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-xway.c
@@ -0,0 +1,20 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+ ltq_register_asc(0);
+ ltq_register_asc(1);
+ ltq_register_gpio();
+ ltq_register_wdt();
+}
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 2adead5..b2cad4f 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o
obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += dump_tlb.o
+obj-$(CONFIG_CPU_XLR) += dump_tlb.o
# libgcc-style stuff needed in the kernel
obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 8c807c9..0cb1b97 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -201,8 +201,6 @@
.rating = 120, /* Functional for real use, but not desired */
.read = mfgpt_read,
.mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 22,
};
int __init init_mfgpt_clocksource(void)
@@ -210,8 +208,7 @@
if (num_possible_cpus() > 1) /* MFGPT does not scale! */
return 0;
- clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
- return clocksource_register(&clocksource_mfgpt);
+ return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
}
arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index 11b193f..d93830a 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -29,9 +29,10 @@
#define parse_even_earlier(res, option, p) \
do { \
- int ret; \
+ unsigned int tmp __maybe_unused; \
+ \
if (strncmp(option, (char *)p, strlen(option)) == 0) \
- ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
+ tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \
} while (0)
void __init prom_init_env(void)
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index d679c77..4d8c162 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,7 +3,8 @@
#
obj-y += cache.o dma-default.o extable.o fault.o \
- init.o tlbex.o tlbex-fault.o uasm.o page.o
+ init.o mmap.o tlbex.o tlbex-fault.o uasm.o \
+ page.o
obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
obj-$(CONFIG_64BIT) += pgtable-64.o
@@ -29,6 +30,7 @@
obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o
+obj-$(CONFIG_CPU_XLR) += c-r4k.o tlb-r4k.o cex-gen.o
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index b4923a7..d9bc5d3 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1006,6 +1006,7 @@
case CPU_25KF:
case CPU_SB1:
case CPU_SB1A:
+ case CPU_XLR:
c->dcache.flags |= MIPS_CACHE_PINDEX;
break;
@@ -1075,7 +1076,6 @@
unsigned long flags, addr, begin, end, pow2;
unsigned int config = read_c0_config();
struct cpuinfo_mips *c = ¤t_cpu_data;
- int tmp;
if (config & CONF_SC)
return 0;
@@ -1108,7 +1108,6 @@
/* Now search for the wrap around point. */
pow2 = (128 * 1024);
- tmp = 0;
for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) {
cache_op(Index_Load_Tag_SD, addr);
__asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
new file mode 100644
index 0000000..ae3c20a
--- /dev/null
+++ b/arch/mips/mm/mmap.c
@@ -0,0 +1,122 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+
+unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
+
+EXPORT_SYMBOL(shm_align_mask);
+
+#define COLOUR_ALIGN(addr,pgoff) \
+ ((((addr) + shm_align_mask) & ~shm_align_mask) + \
+ (((pgoff) << PAGE_SHIFT) & shm_align_mask))
+
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct vm_area_struct * vmm;
+ int do_color_align;
+
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED) {
+ /* Even MAP_FIXED mappings must reside within TASK_SIZE. */
+ if (TASK_SIZE - len < addr)
+ return -EINVAL;
+
+ /*
+ * We do not accept a shared mapping if it would violate
+ * cache aliasing constraints.
+ */
+ if ((flags & MAP_SHARED) &&
+ ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
+ return -EINVAL;
+ return addr;
+ }
+
+ do_color_align = 0;
+ if (filp || (flags & MAP_SHARED))
+ do_color_align = 1;
+ if (addr) {
+ if (do_color_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+ vmm = find_vma(current->mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vmm || addr + len <= vmm->vm_start))
+ return addr;
+ }
+ addr = current->mm->mmap_base;
+ if (do_color_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+
+ for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
+ /* At this point: (!vmm || addr < vmm->vm_end). */
+ if (TASK_SIZE - len < addr)
+ return -ENOMEM;
+ if (!vmm || addr + len <= vmm->vm_start)
+ return addr;
+ addr = vmm->vm_end;
+ if (do_color_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ }
+}
+
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+ unsigned long random_factor = 0UL;
+
+ if (current->flags & PF_RANDOMIZE) {
+ random_factor = get_random_int();
+ random_factor = random_factor << PAGE_SHIFT;
+ if (TASK_IS_32BIT_ADDR)
+ random_factor &= 0xfffffful;
+ else
+ random_factor &= 0xffffffful;
+ }
+
+ mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+}
+
+static inline unsigned long brk_rnd(void)
+{
+ unsigned long rnd = get_random_int();
+
+ rnd = rnd << PAGE_SHIFT;
+ /* 8MB for 32bit, 256MB for 64bit */
+ if (TASK_IS_32BIT_ADDR)
+ rnd = rnd & 0x7ffffful;
+ else
+ rnd = rnd & 0xffffffful;
+
+ return rnd;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+ unsigned long base = mm->brk;
+ unsigned long ret;
+
+ ret = PAGE_ALIGN(base + brk_rnd());
+
+ if (ret < mm->brk)
+ return mm->brk;
+
+ return ret;
+}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 5ef294f..424ed4b 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -404,6 +404,7 @@
case CPU_5KC:
case CPU_TX49XX:
case CPU_PR4450:
+ case CPU_XLR:
uasm_i_nop(p);
tlbw(p);
break;
@@ -1151,8 +1152,8 @@
struct uasm_reloc *r = relocs;
u32 *f;
unsigned int final_len;
- struct mips_huge_tlb_info htlb_info;
- enum vmalloc64_mode vmalloc_mode;
+ struct mips_huge_tlb_info htlb_info __maybe_unused;
+ enum vmalloc64_mode vmalloc_mode __maybe_unused;
memset(tlb_handler, 0, sizeof(tlb_handler));
memset(labels, 0, sizeof(labels));
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 414f0c9..31180c3 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -193,8 +193,6 @@
void __init prom_init(void)
{
- int result;
-
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
@@ -360,20 +358,14 @@
#ifdef CONFIG_SERIAL_8250_CONSOLE
console_config();
#endif
- /* Early detection of CMP support */
- result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
-
#ifdef CONFIG_MIPS_CMP
- if (result)
+ /* Early detection of CMP support */
+ if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ))
register_smp_ops(&cmp_smp_ops);
+ else
#endif
#ifdef CONFIG_MIPS_MT_SMP
-#ifdef CONFIG_MIPS_CMP
- if (!result)
register_smp_ops(&vsmp_smp_ops);
-#else
- register_smp_ops(&vsmp_smp_ops);
-#endif
#endif
#ifdef CONFIG_MIPS_MT_SMTC
register_smp_ops(&msmtc_smp_ops);
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 9027061..1d36c511 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -56,7 +56,6 @@
static inline int mips_pcibios_iack(void)
{
int irq;
- u32 dummy;
/*
* Determine highest priority pending interrupt by performing
@@ -83,7 +82,7 @@
BONITO_PCIMAP_CFG = 0x20000;
/* Flush Bonito register block */
- dummy = BONITO_PCIMAP_CFG;
+ (void) BONITO_PCIMAP_CFG;
iob(); /* sync */
irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg);
@@ -309,6 +308,8 @@
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
+ scheduler_ipi();
+
return IRQ_HANDLED;
}
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
new file mode 100644
index 0000000..a5ca743
--- /dev/null
+++ b/arch/mips/netlogic/Kconfig
@@ -0,0 +1,5 @@
+config NLM_COMMON
+ bool
+
+config NLM_XLR
+ bool
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
new file mode 100644
index 0000000..9bd3f73
--- /dev/null
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -0,0 +1,5 @@
+obj-y += setup.o platform.o irq.o setup.o time.o
+obj-$(CONFIG_SMP) += smp.o smpboot.o
+obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c
new file mode 100644
index 0000000..1446d58e
--- /dev/null
+++ b/arch/mips/netlogic/xlr/irq.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/mips-extns.h>
+
+static u64 nlm_irq_mask;
+static DEFINE_SPINLOCK(nlm_pic_lock);
+
+static void xlr_pic_enable(struct irq_data *d)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+ unsigned long flags;
+ nlm_reg_t reg;
+ int irq = d->irq;
+
+ WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq);
+
+ spin_lock_irqsave(&nlm_pic_lock, flags);
+ reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE);
+ netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE,
+ reg | (1 << 6) | (1 << 30) | (1 << 31));
+ spin_unlock_irqrestore(&nlm_pic_lock, flags);
+}
+
+static void xlr_pic_mask(struct irq_data *d)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+ unsigned long flags;
+ nlm_reg_t reg;
+ int irq = d->irq;
+
+ WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq);
+
+ spin_lock_irqsave(&nlm_pic_lock, flags);
+ reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE);
+ netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE,
+ reg | (1 << 6) | (1 << 30) | (0 << 31));
+ spin_unlock_irqrestore(&nlm_pic_lock, flags);
+}
+
+#ifdef CONFIG_PCI
+/* Extra ACK needed for XLR on chip PCI controller */
+static void xlr_pci_ack(struct irq_data *d)
+{
+ nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET);
+
+ netlogic_read_reg(pci_mmio, (0x140 >> 2));
+}
+
+/* Extra ACK needed for XLS on chip PCIe controller */
+static void xls_pcie_ack(struct irq_data *d)
+{
+ nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET);
+
+ switch (d->irq) {
+ case PIC_PCIE_LINK0_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff);
+ break;
+ case PIC_PCIE_LINK1_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff);
+ break;
+ case PIC_PCIE_LINK2_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff);
+ break;
+ case PIC_PCIE_LINK3_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff);
+ break;
+ }
+}
+
+/* For XLS B silicon, the 3,4 PCI interrupts are different */
+static void xls_pcie_ack_b(struct irq_data *d)
+{
+ nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET);
+
+ switch (d->irq) {
+ case PIC_PCIE_LINK0_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff);
+ break;
+ case PIC_PCIE_LINK1_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff);
+ break;
+ case PIC_PCIE_XLSB0_LINK2_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff);
+ break;
+ case PIC_PCIE_XLSB0_LINK3_IRQ:
+ netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff);
+ break;
+ }
+}
+#endif
+
+static void xlr_pic_ack(struct irq_data *d)
+{
+ unsigned long flags;
+ nlm_reg_t *mmio;
+ int irq = d->irq;
+ void *hd = irq_data_get_irq_handler_data(d);
+
+ WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq);
+
+ if (hd) {
+ void (*extra_ack)(void *) = hd;
+ extra_ack(d);
+ }
+ mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+ spin_lock_irqsave(&nlm_pic_lock, flags);
+ netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE)));
+ spin_unlock_irqrestore(&nlm_pic_lock, flags);
+}
+
+/*
+ * This chip definition handles interrupts routed thru the XLR
+ * hardware PIC, currently IRQs 8-39 are mapped to hardware intr
+ * 0-31 wired the XLR PIC
+ */
+static struct irq_chip xlr_pic = {
+ .name = "XLR-PIC",
+ .irq_enable = xlr_pic_enable,
+ .irq_mask = xlr_pic_mask,
+ .irq_ack = xlr_pic_ack,
+};
+
+static void rsvd_irq_handler(struct irq_data *d)
+{
+ WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq);
+}
+
+/*
+ * Chip definition for CPU originated interrupts(timer, msg) and
+ * IPIs
+ */
+struct irq_chip nlm_cpu_intr = {
+ .name = "XLR-CPU-INTR",
+ .irq_enable = rsvd_irq_handler,
+ .irq_mask = rsvd_irq_handler,
+ .irq_ack = rsvd_irq_handler,
+};
+
+void __init init_xlr_irqs(void)
+{
+ nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+ uint32_t thread_mask = 1;
+ int level, i;
+
+ pr_info("Interrupt thread mask [%x]\n", thread_mask);
+ for (i = 0; i < PIC_NUM_IRTS; i++) {
+ level = PIC_IRQ_IS_EDGE_TRIGGERED(i);
+
+ /* Bind all PIC irqs to boot cpu */
+ netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask);
+
+ /*
+ * Use local scheduling and high polarity for all IRTs
+ * Invalidate all IRTs, by default
+ */
+ netlogic_write_reg(mmio, PIC_IRT_1_BASE + i,
+ (level << 30) | (1 << 6) | (PIC_IRQ_BASE + i));
+ }
+
+ /* Make all IRQs as level triggered by default */
+ for (i = 0; i < NR_IRQS; i++) {
+ if (PIC_IRQ_IS_IRT(i))
+ irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq);
+ else
+ irq_set_chip_and_handler(i, &nlm_cpu_intr,
+ handle_level_irq);
+ }
+#ifdef CONFIG_SMP
+ irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr,
+ nlm_smp_function_ipi_handler);
+ irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr,
+ nlm_smp_resched_ipi_handler);
+ nlm_irq_mask |=
+ ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE));
+#endif
+
+#ifdef CONFIG_PCI
+ /*
+ * For PCI interrupts, we need to ack the PIC controller too, overload
+ * irq handler data to do this
+ */
+ if (nlm_chip_is_xls()) {
+ if (nlm_chip_is_xls_b()) {
+ irq_set_handler_data(PIC_PCIE_LINK0_IRQ,
+ xls_pcie_ack_b);
+ irq_set_handler_data(PIC_PCIE_LINK1_IRQ,
+ xls_pcie_ack_b);
+ irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ,
+ xls_pcie_ack_b);
+ irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ,
+ xls_pcie_ack_b);
+ } else {
+ irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack);
+ irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack);
+ irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack);
+ irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack);
+ }
+ } else {
+ /* XLR PCI controller ACK */
+ irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+ }
+#endif
+ /* unmask all PIC related interrupts. If no handler is installed by the
+ * drivers, it'll just ack the interrupt and return
+ */
+ for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++)
+ nlm_irq_mask |= (1ULL << i);
+
+ nlm_irq_mask |= (1ULL << IRQ_TIMER);
+}
+
+void __init arch_init_irq(void)
+{
+ /* Initialize the irq descriptors */
+ init_xlr_irqs();
+ write_c0_eimr(nlm_irq_mask);
+}
+
+void __cpuinit nlm_smp_irq_init(void)
+{
+ /* set interrupt mask for non-zero cpus */
+ write_c0_eimr(nlm_irq_mask);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ uint64_t eirr;
+ int i;
+
+ eirr = read_c0_eirr() & read_c0_eimr();
+ if (!eirr)
+ return;
+
+ /* no need of EIRR here, writing compare clears interrupt */
+ if (eirr & (1 << IRQ_TIMER)) {
+ do_IRQ(IRQ_TIMER);
+ return;
+ }
+
+ /* use dcltz: optimize below code */
+ for (i = 63; i != -1; i--) {
+ if (eirr & (1ULL << i))
+ break;
+ }
+ if (i == -1) {
+ pr_err("no interrupt !!\n");
+ return;
+ }
+
+ /* Ack eirr */
+ write_c0_eirr(1ULL << i);
+
+ do_IRQ(i);
+}
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
new file mode 100644
index 0000000..609ec25
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+{
+ nlm_reg_t *mmio;
+ unsigned int value;
+
+ /* XLR uart does not need any mapping of regs */
+ mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift));
+ value = netlogic_read_reg(mmio, 0);
+
+ /* See XLR/XLS errata */
+ if (offset == UART_MSR)
+ value ^= 0xF0;
+ else if (offset == UART_MCR)
+ value ^= 0x3;
+
+ return value;
+}
+
+void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+{
+ nlm_reg_t *mmio;
+
+ /* XLR uart does not need any mapping of regs */
+ mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift));
+
+ /* See XLR/XLS errata */
+ if (offset == UART_MSR)
+ value ^= 0xF0;
+ else if (offset == UART_MCR)
+ value ^= 0x3;
+
+ netlogic_write_reg(mmio, 0, value);
+}
+
+#define PORT(_irq) \
+ { \
+ .irq = _irq, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM32, \
+ .flags = (UPF_SKIP_TEST | \
+ UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
+ .uartclk = PIC_CLKS_PER_SEC, \
+ .type = PORT_16550A, \
+ .serial_in = nlm_xlr_uart_in, \
+ .serial_out = nlm_xlr_uart_out, \
+ }
+
+static struct plat_serial8250_port xlr_uart_data[] = {
+ PORT(PIC_UART_0_IRQ),
+ PORT(PIC_UART_1_IRQ),
+ {},
+};
+
+static struct platform_device uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = xlr_uart_data,
+ },
+};
+
+static int __init nlm_uart_init(void)
+{
+ nlm_reg_t *mmio;
+
+ mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+ xlr_uart_data[0].membase = (void __iomem *)mmio;
+ xlr_uart_data[0].mapbase = CPHYSADDR((unsigned long)mmio);
+
+ mmio = netlogic_io_mmio(NETLOGIC_IO_UART_1_OFFSET);
+ xlr_uart_data[1].membase = (void __iomem *)mmio;
+ xlr_uart_data[1].mapbase = CPHYSADDR((unsigned long)mmio);
+
+ return platform_device_register(&uart_device);
+}
+
+arch_initcall(nlm_uart_init);
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
new file mode 100644
index 0000000..4828025
--- /dev/null
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/smp-ops.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/gpio.h>
+
+unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE);
+unsigned long nlm_common_ebase = 0x0;
+struct psb_info nlm_prom_info;
+
+static void nlm_early_serial_setup(void)
+{
+ struct uart_port s;
+ nlm_reg_t *uart_base;
+
+ uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+ memset(&s, 0, sizeof(s));
+ s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ s.iotype = UPIO_MEM32;
+ s.regshift = 2;
+ s.irq = PIC_UART_0_IRQ;
+ s.uartclk = PIC_CLKS_PER_SEC;
+ s.serial_in = nlm_xlr_uart_in;
+ s.serial_out = nlm_xlr_uart_out;
+ s.mapbase = (unsigned long)uart_base;
+ s.membase = (unsigned char __iomem *)uart_base;
+ early_serial_setup(&s);
+}
+
+static void nlm_linux_exit(void)
+{
+ nlm_reg_t *mmio;
+
+ mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET);
+ /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
+ netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1);
+ for ( ; ; )
+ cpu_wait();
+}
+
+void __init plat_mem_setup(void)
+{
+ panic_timeout = 5;
+ _machine_restart = (void (*)(char *))nlm_linux_exit;
+ _machine_halt = nlm_linux_exit;
+ pm_power_off = nlm_linux_exit;
+}
+
+const char *get_system_type(void)
+{
+ return "Netlogic XLR/XLS Series";
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing yet */
+}
+
+static void build_arcs_cmdline(int *argv)
+{
+ int i, remain, len;
+ char *arg;
+
+ remain = sizeof(arcs_cmdline) - 1;
+ arcs_cmdline[0] = '\0';
+ for (i = 0; argv[i] != 0; i++) {
+ arg = (char *)(long)argv[i];
+ len = strlen(arg);
+ if (len + 1 > remain)
+ break;
+ strcat(arcs_cmdline, arg);
+ strcat(arcs_cmdline, " ");
+ remain -= len + 1;
+ }
+
+ /* Add the default options here */
+ if ((strstr(arcs_cmdline, "console=")) == NULL) {
+ arg = "console=ttyS0,38400 ";
+ len = strlen(arg);
+ if (len > remain)
+ goto fail;
+ strcat(arcs_cmdline, arg);
+ remain -= len;
+ }
+#ifdef CONFIG_BLK_DEV_INITRD
+ if ((strstr(arcs_cmdline, "rdinit=")) == NULL) {
+ arg = "rdinit=/sbin/init ";
+ len = strlen(arg);
+ if (len > remain)
+ goto fail;
+ strcat(arcs_cmdline, arg);
+ remain -= len;
+ }
+#endif
+ return;
+fail:
+ panic("Cannot add %s, command line too big!", arg);
+}
+
+static void prom_add_memory(void)
+{
+ struct nlm_boot_mem_map *bootm;
+ u64 start, size;
+ u64 pref_backup = 512; /* avoid pref walking beyond end */
+ int i;
+
+ bootm = (void *)(long)nlm_prom_info.psb_mem_map;
+ for (i = 0; i < bootm->nr_map; i++) {
+ if (bootm->map[i].type != BOOT_MEM_RAM)
+ continue;
+ start = bootm->map[i].addr;
+ size = bootm->map[i].size;
+
+ /* Work around for using bootloader mem */
+ if (i == 0 && start == 0 && size == 0x0c000000)
+ size = 0x0ff00000;
+
+ add_memory_region(start, size - pref_backup, BOOT_MEM_RAM);
+ }
+}
+
+void __init prom_init(void)
+{
+ int *argv, *envp; /* passed as 32 bit ptrs */
+ struct psb_info *prom_infop;
+
+ /* truncate to 32 bit and sign extend all args */
+ argv = (int *)(long)(int)fw_arg1;
+ envp = (int *)(long)(int)fw_arg2;
+ prom_infop = (struct psb_info *)(long)(int)fw_arg3;
+
+ nlm_prom_info = *prom_infop;
+
+ nlm_early_serial_setup();
+ build_arcs_cmdline(argv);
+ nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
+ prom_add_memory();
+
+#ifdef CONFIG_SMP
+ nlm_wakeup_secondary_cpus(nlm_prom_info.online_cpu_map);
+ register_smp_ops(&nlm_smp_ops);
+#endif
+}
diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c
new file mode 100644
index 0000000..b495a7f
--- /dev/null
+++ b/arch/mips/netlogic/xlr/smp.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+
+#include <asm/mmu_context.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+void core_send_ipi(int logical_cpu, unsigned int action)
+{
+ int cpu = cpu_logical_map(logical_cpu);
+ u32 tid = cpu & 0x3;
+ u32 pid = (cpu >> 2) & 0x07;
+ u32 ipi = (tid << 16) | (pid << 20);
+
+ if (action & SMP_CALL_FUNCTION)
+ ipi |= IRQ_IPI_SMP_FUNCTION;
+ else if (action & SMP_RESCHEDULE_YOURSELF)
+ ipi |= IRQ_IPI_SMP_RESCHEDULE;
+ else
+ return;
+
+ pic_send_ipi(ipi);
+}
+
+void nlm_send_ipi_single(int cpu, unsigned int action)
+{
+ core_send_ipi(cpu, action);
+}
+
+void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+ int cpu;
+
+ for_each_cpu(cpu, mask) {
+ core_send_ipi(cpu, action);
+ }
+}
+
+/* IRQ_IPI_SMP_FUNCTION Handler */
+void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc)
+{
+ smp_call_function_interrupt();
+}
+
+/* IRQ_IPI_SMP_RESCHEDULE handler */
+void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc)
+{
+ set_need_resched();
+}
+
+void nlm_common_ipi_handler(int irq, struct pt_regs *regs)
+{
+ if (irq == IRQ_IPI_SMP_FUNCTION) {
+ smp_call_function_interrupt();
+ } else {
+ /* Announce that we are for reschduling */
+ set_need_resched();
+ }
+}
+
+/*
+ * Called before going into mips code, early cpu init
+ */
+void nlm_early_init_secondary(void)
+{
+ write_c0_ebase((uint32_t)nlm_common_ebase);
+ /* TLB partition here later */
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit nlm_init_secondary(void)
+{
+ nlm_smp_irq_init();
+}
+
+void nlm_smp_finish(void)
+{
+#ifdef notyet
+ nlm_common_msgring_cpu_init();
+#endif
+}
+
+void nlm_cpus_done(void)
+{
+}
+
+/*
+ * Boot all other cpus in the system, initialize them, and bring them into
+ * the boot function
+ */
+int nlm_cpu_unblock[NR_CPUS];
+int nlm_cpu_ready[NR_CPUS];
+unsigned long nlm_next_gp;
+unsigned long nlm_next_sp;
+cpumask_t phys_cpu_present_map;
+
+void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
+{
+ unsigned long gp = (unsigned long)task_thread_info(idle);
+ unsigned long sp = (unsigned long)__KSTK_TOS(idle);
+ int cpu = cpu_logical_map(logical_cpu);
+
+ nlm_next_sp = sp;
+ nlm_next_gp = gp;
+
+ /* barrier */
+ __sync();
+ nlm_cpu_unblock[cpu] = 1;
+}
+
+void __init nlm_smp_setup(void)
+{
+ unsigned int boot_cpu;
+ int num_cpus, i;
+
+ boot_cpu = hard_smp_processor_id();
+ cpus_clear(phys_cpu_present_map);
+
+ cpu_set(boot_cpu, phys_cpu_present_map);
+ __cpu_number_map[boot_cpu] = 0;
+ __cpu_logical_map[0] = boot_cpu;
+ cpu_set(0, cpu_possible_map);
+
+ num_cpus = 1;
+ for (i = 0; i < NR_CPUS; i++) {
+ if (nlm_cpu_ready[i]) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = num_cpus;
+ __cpu_logical_map[num_cpus] = i;
+ cpu_set(num_cpus, cpu_possible_map);
+ ++num_cpus;
+ }
+ }
+
+ pr_info("Phys CPU present map: %lx, possible map %lx\n",
+ (unsigned long)phys_cpu_present_map.bits[0],
+ (unsigned long)cpu_possible_map.bits[0]);
+
+ pr_info("Detected %i Slave CPU(s)\n", num_cpus);
+}
+
+void nlm_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops nlm_smp_ops = {
+ .send_ipi_single = nlm_send_ipi_single,
+ .send_ipi_mask = nlm_send_ipi_mask,
+ .init_secondary = nlm_init_secondary,
+ .smp_finish = nlm_smp_finish,
+ .cpus_done = nlm_cpus_done,
+ .boot_secondary = nlm_boot_secondary,
+ .smp_setup = nlm_smp_setup,
+ .prepare_cpus = nlm_prepare_cpus,
+};
+
+unsigned long secondary_entry_point;
+
+int nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+{
+ unsigned int tid, pid, ipi, i, boot_cpu;
+ void *reset_vec;
+
+ secondary_entry_point = (unsigned long)prom_pre_boot_secondary_cpus;
+ reset_vec = (void *)CKSEG1ADDR(0x1fc00000);
+ memcpy(reset_vec, nlm_boot_smp_nmi, 0x80);
+ boot_cpu = hard_smp_processor_id();
+
+ for (i = 0; i < NR_CPUS; i++) {
+ if (i == boot_cpu)
+ continue;
+ if (wakeup_mask & (1u << i)) {
+ tid = i & 0x3;
+ pid = (i >> 2) & 0x7;
+ ipi = (tid << 16) | (pid << 20) | (1 << 8);
+ pic_send_ipi(ipi);
+ }
+ }
+
+ return 0;
+}
diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S
new file mode 100644
index 0000000..b8e0744
--- /dev/null
+++ b/arch/mips/netlogic/xlr/smpboot.S
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+
+/* Don't jump to linux function from Bootloader stack. Change it
+ * here. Kernel might allocate bootloader memory before all the CPUs are
+ * brought up (eg: Inode cache region) and we better don't overwrite this
+ * memory
+ */
+NESTED(prom_pre_boot_secondary_cpus, 16, sp)
+ .set mips64
+ mfc0 t0, $15, 1 # read ebase
+ andi t0, 0x1f # t0 has the processor_id()
+ sll t0, 2 # offset in cpu array
+
+ PTR_LA t1, nlm_cpu_ready # mark CPU ready
+ PTR_ADDU t1, t0
+ li t2, 1
+ sw t2, 0(t1)
+
+ PTR_LA t1, nlm_cpu_unblock
+ PTR_ADDU t1, t0
+1: lw t2, 0(t1) # wait till unblocked
+ beqz t2, 1b
+ nop
+
+ PTR_LA t1, nlm_next_sp
+ PTR_L sp, 0(t1)
+ PTR_LA t1, nlm_next_gp
+ PTR_L gp, 0(t1)
+
+ PTR_LA t0, nlm_early_init_secondary
+ jalr t0
+ nop
+
+ PTR_LA t0, smp_bootstrap
+ jr t0
+ nop
+END(prom_pre_boot_secondary_cpus)
+
+NESTED(nlm_boot_smp_nmi, 0, sp)
+ .set push
+ .set noat
+ .set mips64
+ .set noreorder
+
+ /* Clear the NMI and BEV bits */
+ MFC0 k0, CP0_STATUS
+ li k1, 0xffb7ffff
+ and k0, k0, k1
+ MTC0 k0, CP0_STATUS
+
+ PTR_LA k1, secondary_entry_point
+ PTR_L k0, 0(k1)
+ jr k0
+ nop
+ .set pop
+END(nlm_boot_smp_nmi)
diff --git a/arch/mips/netlogic/xlr/time.c b/arch/mips/netlogic/xlr/time.c
new file mode 100644
index 0000000..0d81b26
--- /dev/null
+++ b/arch/mips/netlogic/xlr/time.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+
+#include <asm/time.h>
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+ return IRQ_TIMER;
+}
+
+void __init plat_time_init(void)
+{
+ mips_hpt_frequency = nlm_prom_info.cpu_frequency;
+ pr_info("MIPS counter frequency [%ld]\n",
+ (unsigned long)mips_hpt_frequency);
+}
diff --git a/arch/mips/netlogic/xlr/xlr_console.c b/arch/mips/netlogic/xlr/xlr_console.c
new file mode 100644
index 0000000..759df06
--- /dev/null
+++ b/arch/mips/netlogic/xlr/xlr_console.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <asm/netlogic/xlr/iomap.h>
+
+void prom_putchar(char c)
+{
+ nlm_reg_t *mmio;
+
+ mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+ while (netlogic_read_reg(mmio, 0x5) == 0)
+ ;
+ netlogic_write_reg(mmio, 0x0, c);
+}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c9209ca..4df8799 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
@@ -55,6 +56,7 @@
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+obj-$(CONFIG_NLM_XLR) += pci-xlr.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
new file mode 100644
index 0000000..1f2afb5
--- /dev/null
+++ b/arch/mips/pci/ops-lantiq.c
@@ -0,0 +1,116 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <linux/vmalloc.h>
+
+#include <lantiq_soc.h>
+
+#include "pci-lantiq.h"
+
+#define LTQ_PCI_CFG_BUSNUM_SHF 16
+#define LTQ_PCI_CFG_DEVNUM_SHF 11
+#define LTQ_PCI_CFG_FUNNUM_SHF 8
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+ unsigned int devfn, unsigned int where, u32 *data)
+{
+ unsigned long cfg_base;
+ unsigned long flags;
+ u32 temp;
+
+ /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the
+ SoC itself */
+ if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
+ || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
+ return 1;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+
+ cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+ cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
+ LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
+
+ /* Perform access */
+ if (access_type == PCI_ACCESS_WRITE) {
+ ltq_w32(swab32(*data), ((u32 *)cfg_base));
+ } else {
+ *data = ltq_r32(((u32 *)(cfg_base)));
+ *data = swab32(*data);
+ }
+ wmb();
+
+ /* clean possible Master abort */
+ cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+ cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ temp = ltq_r32(((u32 *)(cfg_base)));
+ temp = swab32(temp);
+ cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+ cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ ltq_w32(temp, ((u32 *)cfg_base));
+
+ spin_unlock_irqrestore(&ebu_lock, flags);
+
+ if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
+ return 1;
+
+ return 0;
+}
+
+int ltq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if (ltq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int ltq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if (size == 4) {
+ data = val;
+ } else {
+ if (ltq_pci_config_access(PCI_ACCESS_READ, bus,
+ devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (ltq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
new file mode 100644
index 0000000..603d749
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.c
@@ -0,0 +1,297 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_device.h>
+
+#include <asm/pci.h>
+#include <asm/gpio.h>
+#include <asm/addrspace.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#include "pci-lantiq.h"
+
+#define LTQ_PCI_CFG_BASE 0x17000000
+#define LTQ_PCI_CFG_SIZE 0x00008000
+#define LTQ_PCI_MEM_BASE 0x18000000
+#define LTQ_PCI_MEM_SIZE 0x02000000
+#define LTQ_PCI_IO_BASE 0x1AE00000
+#define LTQ_PCI_IO_SIZE 0x00200000
+
+#define PCI_CR_FCI_ADDR_MAP0 0x00C0
+#define PCI_CR_FCI_ADDR_MAP1 0x00C4
+#define PCI_CR_FCI_ADDR_MAP2 0x00C8
+#define PCI_CR_FCI_ADDR_MAP3 0x00CC
+#define PCI_CR_FCI_ADDR_MAP4 0x00D0
+#define PCI_CR_FCI_ADDR_MAP5 0x00D4
+#define PCI_CR_FCI_ADDR_MAP6 0x00D8
+#define PCI_CR_FCI_ADDR_MAP7 0x00DC
+#define PCI_CR_CLK_CTRL 0x0000
+#define PCI_CR_PCI_MOD 0x0030
+#define PCI_CR_PC_ARB 0x0080
+#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
+#define PCI_CR_BAR11MASK 0x0044
+#define PCI_CR_BAR12MASK 0x0048
+#define PCI_CR_BAR13MASK 0x004C
+#define PCI_CS_BASE_ADDR1 0x0010
+#define PCI_CR_PCI_ADDR_MAP11 0x0064
+#define PCI_CR_FCI_BURST_LENGTH 0x00E8
+#define PCI_CR_PCI_EOI 0x002C
+#define PCI_CS_STS_CMD 0x0004
+
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+#define INTERNAL_ARB_ENABLE_BIT 0
+
+#define LTQ_CGU_IFCCR 0x0018
+#define LTQ_CGU_PCICR 0x0034
+
+#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
+#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
+
+#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
+#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
+
+struct ltq_pci_gpio_map {
+ int pin;
+ int alt0;
+ int alt1;
+ int dir;
+ char *name;
+};
+
+/* the pci core can make use of the following gpios */
+static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
+ { 0, 1, 0, 0, "pci-exin0" },
+ { 1, 1, 0, 0, "pci-exin1" },
+ { 2, 1, 0, 0, "pci-exin2" },
+ { 39, 1, 0, 0, "pci-exin3" },
+ { 10, 1, 0, 0, "pci-exin4" },
+ { 9, 1, 0, 0, "pci-exin5" },
+ { 30, 1, 0, 1, "pci-gnt1" },
+ { 23, 1, 0, 1, "pci-gnt2" },
+ { 19, 1, 0, 1, "pci-gnt3" },
+ { 38, 1, 0, 1, "pci-gnt4" },
+ { 29, 1, 0, 0, "pci-req1" },
+ { 31, 1, 0, 0, "pci-req2" },
+ { 3, 1, 0, 0, "pci-req3" },
+ { 37, 1, 0, 0, "pci-req4" },
+};
+
+__iomem void *ltq_pci_mapped_cfg;
+static __iomem void *ltq_pci_membase;
+
+int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
+
+/* Since the PCI REQ pins can be reused for other functionality, make it
+ possible to exclude those from interpretation by the PCI controller */
+static int ltq_pci_req_mask = 0xf;
+
+static int *ltq_pci_irq_map;
+
+struct pci_ops ltq_pci_ops = {
+ .read = ltq_pci_read_config_dword,
+ .write = ltq_pci_write_config_dword
+};
+
+static struct resource pci_io_resource = {
+ .name = "pci io space",
+ .start = LTQ_PCI_IO_BASE,
+ .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ .name = "pci memory space",
+ .start = LTQ_PCI_MEM_BASE,
+ .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller ltq_pci_controller = {
+ .pci_ops = <q_pci_ops,
+ .mem_resource = &pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &pci_io_resource,
+ .io_offset = 0x00000000UL,
+};
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ if (ltqpci_plat_dev_init)
+ return ltqpci_plat_dev_init(dev);
+
+ return 0;
+}
+
+static u32 ltq_calc_bar11mask(void)
+{
+ u32 mem, bar11mask;
+
+ /* BAR11MASK value depends on available memory on system. */
+ mem = num_physpages * PAGE_SIZE;
+ bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
+
+ return bar11mask;
+}
+
+static void ltq_pci_setup_gpio(int gpio)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
+ if (gpio & (1 << i)) {
+ ltq_gpio_request(ltq_pci_gpio_map[i].pin,
+ ltq_pci_gpio_map[i].alt0,
+ ltq_pci_gpio_map[i].alt1,
+ ltq_pci_gpio_map[i].dir,
+ ltq_pci_gpio_map[i].name);
+ }
+ }
+ ltq_gpio_request(21, 0, 0, 1, "pci-reset");
+ ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+}
+
+static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
+{
+ u32 temp_buffer;
+
+ /* set clock to 33Mhz */
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+
+ /* external or internal clock ? */
+ if (conf->clock) {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16),
+ LTQ_CGU_IFCCR);
+ ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR);
+ } else {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16),
+ LTQ_CGU_IFCCR);
+ ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR);
+ }
+
+ /* setup pci clock and gpis used by pci */
+ ltq_pci_setup_gpio(conf->gpio);
+
+ /* enable auto-switching between PCI and EBU */
+ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+
+ /* busy, i.e. configuration is not done, PCI access has to be retried */
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+ /* BUS Master/IO/MEM access */
+ ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
+
+ /* enable external 2 PCI masters */
+ temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
+ temp_buffer &= (~(ltq_pci_req_mask << 16));
+ /* enable internal arbiter */
+ temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
+ /* enable internal PCI master reqest */
+ temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
+
+ /* enable EBU request */
+ temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
+
+ /* enable all external masters request */
+ temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
+ ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
+ wmb();
+
+ /* setup BAR memory regions */
+ ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
+ ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
+ ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
+ ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
+ ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
+ ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
+ ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
+ ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
+ ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
+ ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
+ ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
+ ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
+ /* both TX and RX endian swap are enabled */
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
+ wmb();
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
+ PCI_CR_BAR12MASK);
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
+ PCI_CR_BAR13MASK);
+ /*use 8 dw burst length */
+ ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+
+ /* setup irq line */
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
+
+ /* toggle reset pin */
+ __gpio_set_value(21, 0);
+ wmb();
+ mdelay(1);
+ __gpio_set_value(21, 1);
+ return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (ltq_pci_irq_map[slot])
+ return ltq_pci_irq_map[slot];
+ printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
+ slot);
+
+ return 0;
+}
+
+static int __devinit ltq_pci_probe(struct platform_device *pdev)
+{
+ struct ltq_pci_data *ltq_pci_data =
+ (struct ltq_pci_data *) pdev->dev.platform_data;
+ pci_probe_only = 0;
+ ltq_pci_irq_map = ltq_pci_data->irq;
+ ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
+ ltq_pci_mapped_cfg =
+ ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+ ltq_pci_controller.io_map_base =
+ (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+ ltq_pci_startup(ltq_pci_data);
+ register_pci_controller(<q_pci_controller);
+
+ return 0;
+}
+
+static struct platform_driver
+ltq_pci_driver = {
+ .probe = ltq_pci_probe,
+ .driver = {
+ .name = "ltq_pci",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init pcibios_init(void)
+{
+ int ret = platform_driver_register(<q_pci_driver);
+ if (ret)
+ printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
+ return ret;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
new file mode 100644
index 0000000..66bf6cd
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_PCI_H__
+#define _LTQ_PCI_H__
+
+extern __iomem void *ltq_pci_mapped_cfg;
+extern int ltq_pci_read_config_dword(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val);
+extern int ltq_pci_write_config_dword(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val);
+
+#endif
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
new file mode 100644
index 0000000..38fece1
--- /dev/null
+++ b/arch/mips/pci/pci-xlr.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+static void *pci_config_base;
+
+#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off))
+
+/* PCI ops */
+static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ u32 data;
+ u32 *cfgaddr;
+
+ cfgaddr = (u32 *)(pci_config_base +
+ pci_cfg_addr(bus->number, devfn, where & ~3));
+ data = *cfgaddr;
+ return cpu_to_le32(data);
+}
+
+static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 data)
+{
+ u32 *cfgaddr;
+
+ cfgaddr = (u32 *)(pci_config_base +
+ pci_cfg_addr(bus->number, devfn, where & ~3));
+ *cfgaddr = cpu_to_le32(data);
+}
+
+static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = pci_cfg_read_32bit(bus, devfn, where);
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = pci_cfg_read_32bit(bus, devfn, where);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ pci_cfg_write_32bit(bus, devfn, where, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops nlm_pci_ops = {
+ .read = nlm_pcibios_read,
+ .write = nlm_pcibios_write
+};
+
+static struct resource nlm_pci_mem_resource = {
+ .name = "XLR PCI MEM",
+ .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
+ .end = 0xdfffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource nlm_pci_io_resource = {
+ .name = "XLR IO MEM",
+ .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */
+ .end = 0x100fffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller nlm_pci_controller = {
+ .index = 0,
+ .pci_ops = &nlm_pci_ops,
+ .mem_resource = &nlm_pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &nlm_pci_io_resource,
+ .io_offset = 0x00000000UL,
+};
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (!nlm_chip_is_xls())
+ return PIC_PCIX_IRQ; /* for XLR just one IRQ*/
+
+ /*
+ * For XLS PCIe, there is an IRQ per Link, find out which
+ * link the device is on to assign interrupts
+ */
+ if (dev->bus->self == NULL)
+ return 0;
+
+ switch (dev->bus->self->devfn) {
+ case 0x0:
+ return PIC_PCIE_LINK0_IRQ;
+ case 0x8:
+ return PIC_PCIE_LINK1_IRQ;
+ case 0x10:
+ if (nlm_chip_is_xls_b())
+ return PIC_PCIE_XLSB0_LINK2_IRQ;
+ else
+ return PIC_PCIE_LINK2_IRQ;
+ case 0x18:
+ if (nlm_chip_is_xls_b())
+ return PIC_PCIE_XLSB0_LINK3_IRQ;
+ else
+ return PIC_PCIE_LINK3_IRQ;
+ }
+ WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+ return 0;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static int __init pcibios_init(void)
+{
+ /* PSB assigns PCI resources */
+ pci_probe_only = 1;
+ pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20);
+
+ /* Extend IO port for memory mapped io */
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+
+ set_io_port_base(CKSEG1);
+ nlm_pci_controller.io_map_base = CKSEG1;
+
+ pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n");
+ register_pci_controller(&nlm_pci_controller);
+
+ return 0;
+}
+
+arch_initcall(pcibios_init);
+
+struct pci_fixup pcibios_fixups[] = {
+ {0}
+};
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
index f9b9dcd..98fd009 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
@@ -97,7 +97,7 @@
static struct irq_chip msp_per_irq_controller = {
.name = "MSP_PER",
- .irq_enable = unmask_per_irq.
+ .irq_enable = unmask_per_irq,
.irq_disable = mask_per_irq,
.irq_ack = msp_per_irq_ack,
#ifdef CONFIG_SMP
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index efc9e88..2608752 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -55,6 +55,8 @@
if (status & 0x2)
smp_call_function_interrupt();
+ if (status & 0x4)
+ scheduler_ipi();
break;
case 1:
@@ -63,6 +65,8 @@
if (status & 0x2)
smp_call_function_interrupt();
+ if (status & 0x4)
+ scheduler_ipi();
break;
}
}
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index dbb5c7b..f8a751c 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -35,7 +35,7 @@
0:
PTR_L t1, PBE_ADDRESS(t0) /* source */
PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */
- PTR_ADDIU t3, t1, PAGE_SIZE
+ PTR_ADDU t3, t1, PAGE_SIZE
1:
REG_L t8, (t1)
REG_S t8, (t2)
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 37de05d..6c47dfe 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -185,7 +185,7 @@
struct resource *r;
r = rb532_gpio_reg0_res;
- rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+ rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
if (!rb532_gpio_chip->regbase) {
printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index deddbf0..698904d 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -132,7 +132,7 @@
*/
static int __init sgiseeq_devinit(void)
{
- unsigned int tmp;
+ unsigned int pbdma __maybe_unused;
int res, i;
eth0_pd.hpc = hpc3c0;
@@ -151,7 +151,7 @@
/* Second HPC is missing? */
if (ip22_is_fullhouse() ||
- get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
+ get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1]))
return 0;
sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 603fc91..1a94c98 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -32,7 +32,7 @@
static unsigned long dosample(void)
{
u32 ct0, ct1;
- u8 msb, lsb;
+ u8 msb;
/* Start the counter. */
sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
@@ -46,7 +46,7 @@
/* Latch and spin until top byte of counter2 is zero */
do {
writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
- lsb = readb(&sgint->tcnt2);
+ (void) readb(&sgint->tcnt2);
msb = readb(&sgint->tcnt2);
ct1 = read_c0_count();
} while (msb);
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index a1fa4ab..cd0d5b0 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -29,7 +29,6 @@
unsigned long xtalk_addr, size_t size)
{
nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
- volatile hubreg_t junk;
unsigned i;
/* use small-window mapping if possible */
@@ -64,7 +63,7 @@
* after we write it.
*/
IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
- junk = HUB_L(IIO_ITTE_GET(nasid, i));
+ (void) HUB_L(IIO_ITTE_GET(nasid, i));
return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 0a04603..b18b04e 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -147,8 +147,10 @@
#ifdef CONFIG_SMP
if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+ scheduler_ipi();
} else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+ scheduler_ipi();
} else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
smp_call_function_interrupt();
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index c3d30a8..1d1919a 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -54,11 +54,8 @@
static __init void set_ktext_source(nasid_t client_nasid, nasid_t server_nasid)
{
- cnodeid_t client_cnode;
kern_vars_t *kvp;
- client_cnode = NASID_TO_COMPACT_NODEID(client_nasid);
-
kvp = &hub_data(client_nasid)->kern_vars;
KERN_VARS_ADDR(client_nasid) = (unsigned long)kvp;
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index a152538..ef74f32 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -66,18 +66,7 @@
static void rt_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- switch (mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- /* The only mode supported */
- break;
-
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- /* Nothing to do */
- break;
- }
+ /* Nothing to do ... */
}
int rt_timer_irq;
@@ -174,8 +163,7 @@
{
struct clocksource *cs = &hub_rt_clocksource;
- clocksource_set_clock(cs, CYCLES_PER_SEC);
- clocksource_register(cs);
+ clocksource_register_hz(cs, CYCLES_PER_SEC);
}
void __init plat_time_init(void)
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 47b347c..d667875 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/kernel_stat.h>
+#include <linux/sched.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
@@ -189,10 +190,8 @@
/* Clear the mailbox to clear the interrupt */
__raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
- /*
- * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
- * interrupt will do the reschedule for us
- */
+ if (action & SMP_RESCHEDULE_YOURSELF)
+ scheduler_ipi();
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index c00a5cb..38e7f6b 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/kernel_stat.h>
+#include <linux/sched.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
@@ -177,10 +178,8 @@
/* Clear the mailbox to clear the interrupt */
____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
- /*
- * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
- * interrupt will do the reschedule for us
- */
+ if (action & SMP_RESCHEDULE_YOURSELF)
+ scheduler_ipi();
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index c76151b..0904d4d 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -95,7 +95,7 @@
static __init unsigned long dosample(void)
{
u32 ct0, ct1;
- volatile u8 msb, lsb;
+ volatile u8 msb;
/* Start the counter. */
outb_p(0x34, 0x43);
@@ -108,7 +108,7 @@
/* Latch and spin until top byte of counter0 is zero */
do {
outb(0x00, 0x43);
- lsb = inb(0x40);
+ (void) inb(0x40);
msb = inb(0x40);
ct1 = read_c0_count();
} while (msb);
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 3dc19f4..e9f95dc 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -318,19 +318,15 @@
}
#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
-static int tx4939_get_eth_speed(struct net_device *dev)
+static u32 tx4939_get_eth_speed(struct net_device *dev)
{
- struct ethtool_cmd cmd = { ETHTOOL_GSET };
- int speed = 100; /* default 100Mbps */
- int err;
- if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
- return speed;
- err = dev->ethtool_ops->get_settings(dev, &cmd);
- if (err < 0)
- return speed;
- speed = cmd.speed == SPEED_100 ? 100 : 10;
- return speed;
+ struct ethtool_cmd cmd;
+ if (dev_ethtool_get_settings(dev, &cmd))
+ return 100; /* default 100Mbps */
+
+ return ethtool_cmd_speed(&cmd);
}
+
static int tx4939_netdev_event(struct notifier_block *this,
unsigned long event,
void *ptr)
@@ -343,8 +339,7 @@
else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1))
bit = TX4939_PCFG_SPEED1;
if (bit) {
- int speed = tx4939_get_eth_speed(dev);
- if (speed == 100)
+ if (tx4939_get_eth_speed(dev) == 100)
txx9_set64(&tx4939_ccfgptr->pcfg, bit);
else
txx9_clear64(&tx4939_ccfgptr->pcfg, bit);
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index 226c826..83fb279 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -494,14 +494,11 @@
* @irq: The interrupt number.
* @dev_id: The device ID.
*
- * We need do nothing here, since the scheduling will be effected on our way
- * back through entry.S.
- *
* Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
*/
static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id)
{
- /* do nothing */
+ scheduler_ipi();
return IRQ_HANDLED;
}
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 69d63d3..828305f 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -155,10 +155,7 @@
case IPI_RESCHEDULE:
smp_debug(100, KERN_DEBUG "CPU%d IPI_RESCHEDULE\n", this_cpu);
- /*
- * Reschedule callback. Everything to be
- * done is done by the interrupt return path.
- */
+ scheduler_ipi();
break;
case IPI_CALL_FUNC:
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 8f1e4ef..2d9a5c7 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -69,6 +69,9 @@
/* End of text section */
_etext = .;
+ /* Start of data section */
+ _sdata = .;
+
RODATA
/* writeable */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8f4d50b..a3128ca 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -193,6 +193,12 @@
default y if PMAC_APM_EMU
bool
+config EPAPR_BOOT
+ bool
+ help
+ Used to allow a board to specify it wants an ePAPR compliant wrapper.
+ default n
+
config DEFAULT_UIMAGE
bool
help
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 2d38a50..a597dd7 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -267,6 +267,11 @@
Select this to enable early debugging for Nintendo GameCube/Wii
consoles via an external USB Gecko adapter.
+config PPC_EARLY_DEBUG_WSP
+ bool "Early debugging via WSP's internal UART"
+ depends on PPC_WSP
+ select PPC_UDBG_16550
+
endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8917816..c26200b 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -69,7 +69,8 @@
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
fsl-soc.c mpc8xx.c pq2.c ugecon.c
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
- cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
+ cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
+ prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -127,7 +128,7 @@
cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
quiet_cmd_bootar = BOOTAR $@
- cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+ cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
$(call if_changed_dep,bootcc)
@@ -182,6 +183,7 @@
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
+image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
#
# Targets which embed a device tree blob
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index f1c4dfc..0f7428a 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -6,16 +6,28 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
+ * NOTE: this code runs in 32 bit mode, is position-independent,
+ * and is packaged as ELF32.
*/
#include "ppc_asm.h"
.text
- /* a procedure descriptor used when booting this as a COFF file */
+ /* A procedure descriptor used when booting this as a COFF file.
+ * When making COFF, this comes first in the link and we're
+ * linked at 0x500000.
+ */
.globl _zimage_start_opd
_zimage_start_opd:
- .long _zimage_start, 0, 0, 0
+ .long 0x500000, 0, 0, 0
+
+p_start: .long _start
+p_etext: .long _etext
+p_bss_start: .long __bss_start
+p_end: .long _end
+
+ .weak _platform_stack_top
+p_pstack: .long _platform_stack_top
.weak _zimage_start
.globl _zimage_start
@@ -24,37 +36,65 @@
_zimage_start_lib:
/* Work out the offset between the address we were linked at
and the address where we're running. */
- bl 1f
-1: mflr r0
- lis r9,1b@ha
- addi r9,r9,1b@l
- subf. r0,r9,r0
- beq 3f /* if running at same address as linked */
+ bl .+4
+p_base: mflr r10 /* r10 now points to runtime addr of p_base */
+ /* grab the link address of the dynamic section in r11 */
+ addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
+ lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
+ cmpwi r11,0
+ beq 3f /* if not linked -pie */
+ /* get the runtime address of the dynamic section in r12 */
+ .weak __dynamic_start
+ addis r12,r10,(__dynamic_start-p_base)@ha
+ addi r12,r12,(__dynamic_start-p_base)@l
+ subf r11,r11,r12 /* runtime - linktime offset */
- /* The .got2 section contains a list of addresses, so add
- the address offset onto each entry. */
- lis r9,__got2_start@ha
- addi r9,r9,__got2_start@l
- lis r8,__got2_end@ha
- addi r8,r8,__got2_end@l
- subf. r8,r9,r8
+ /* The dynamic section contains a series of tagged entries.
+ * We need the RELA and RELACOUNT entries. */
+RELA = 7
+RELACOUNT = 0x6ffffff9
+ li r9,0
+ li r0,0
+9: lwz r8,0(r12) /* get tag */
+ cmpwi r8,0
+ beq 10f /* end of list */
+ cmpwi r8,RELA
+ bne 11f
+ lwz r9,4(r12) /* get RELA pointer in r9 */
+ b 12f
+11: addis r8,r8,(-RELACOUNT)@ha
+ cmpwi r8,RELACOUNT@l
+ bne 12f
+ lwz r0,4(r12) /* get RELACOUNT value in r0 */
+12: addi r12,r12,8
+ b 9b
+
+ /* The relocation section contains a list of relocations.
+ * We now do the R_PPC_RELATIVE ones, which point to words
+ * which need to be initialized with addend + offset.
+ * The R_PPC_RELATIVE ones come first and there are RELACOUNT
+ * of them. */
+10: /* skip relocation if we don't have both */
+ cmpwi r0,0
beq 3f
- srwi. r8,r8,2
- mtctr r8
- add r9,r0,r9
-2: lwz r8,0(r9)
- add r8,r8,r0
- stw r8,0(r9)
- addi r9,r9,4
+ cmpwi r9,0
+ beq 3f
+
+ add r9,r9,r11 /* Relocate RELA pointer */
+ mtctr r0
+2: lbz r0,4+3(r9) /* ELF32_R_INFO(reloc->r_info) */
+ cmpwi r0,22 /* R_PPC_RELATIVE */
+ bne 3f
+ lwz r12,0(r9) /* reloc->r_offset */
+ lwz r0,8(r9) /* reloc->r_addend */
+ add r0,r0,r11
+ stwx r0,r11,r12
+ addi r9,r9,12
bdnz 2b
/* Do a cache flush for our text, in case the loader didn't */
-3: lis r9,_start@ha
- addi r9,r9,_start@l
- add r9,r0,r9
- lis r8,_etext@ha
- addi r8,r8,_etext@l
- add r8,r0,r8
+3: lwz r9,p_start-p_base(r10) /* note: these are relocated now */
+ lwz r8,p_etext-p_base(r10)
4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
@@ -64,27 +104,19 @@
isync
/* Clear the BSS */
- lis r9,__bss_start@ha
- addi r9,r9,__bss_start@l
- add r9,r0,r9
- lis r8,_end@ha
- addi r8,r8,_end@l
- add r8,r0,r8
- li r10,0
-5: stw r10,0(r9)
+ lwz r9,p_bss_start-p_base(r10)
+ lwz r8,p_end-p_base(r10)
+ li r0,0
+5: stw r0,0(r9)
addi r9,r9,4
cmplw cr0,r9,r8
blt 5b
/* Possibly set up a custom stack */
-.weak _platform_stack_top
- lis r8,_platform_stack_top@ha
- addi r8,r8,_platform_stack_top@l
+ lwz r8,p_pstack-p_base(r10)
cmpwi r8,0
beq 6f
- add r8,r0,r8
lwz r1,0(r8)
- add r1,r0,r1
li r0,0
stwu r0,-16(r1) /* establish a stack frame */
6:
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index e0668f8..d6a8ae4 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,12 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "p1020si.dtsi"
+
/ {
- model = "fsl,P1020";
+ model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
serial0 = &serial0;
@@ -26,34 +25,11 @@
pci1 = &pci1;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
};
localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,88 +141,14 @@
};
soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
fsl_m25p80@0 {
#address-cells = <1>;
@@ -294,66 +196,7 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
@@ -369,10 +212,6 @@
};
mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
@@ -381,97 +220,25 @@
};
enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
};
enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
};
enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
};
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
@@ -481,82 +248,23 @@
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
phy_type = "ulpi";
};
*/
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
@@ -573,18 +281,16 @@
};
pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
new file mode 100644
index 0000000..f0bf7f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -0,0 +1,213 @@
+/*
+ * P1020 RDB Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+ aliases {
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ PowerPC,P1020@1 {
+ status = "disabled";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ status = "disabled";
+ };
+
+ soc@ffe00000 {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ serial1: serial@4600 {
+ status = "disabled";
+ };
+
+ spi@7000 {
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ status = "disabled";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mpic: pic@40000 {
+ protected-sources = <
+ 42 29 30 34 /* serial1, enet0-queue-group0 */
+ 17 18 24 45 /* enet0-queue-group1, crypto */
+ >;
+ };
+
+ };
+
+ pci0: pcie@ffe09000 {
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
new file mode 100644
index 0000000..6ec0220
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -0,0 +1,148 @@
+/*
+ * P1020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+ aliases {
+ ethernet0 = &enet0;
+ serial0 = &serial1;
+ };
+
+ cpus {
+ PowerPC,P1020@0 {
+ status = "disabled";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ status = "disabled";
+ };
+
+ soc@ffe00000 {
+ ecm-law@0 {
+ status = "disabled";
+ };
+
+ ecm@1000 {
+ status = "disabled";
+ };
+
+ memory-controller@2000 {
+ status = "disabled";
+ };
+
+ i2c@3000 {
+ status = "disabled";
+ };
+
+ i2c@3100 {
+ status = "disabled";
+ };
+
+ serial0: serial@4500 {
+ status = "disabled";
+ };
+
+ spi@7000 {
+ status = "disabled";
+ };
+
+ gpio: gpio-controller@f000 {
+ status = "disabled";
+ };
+
+ dma@21300 {
+ status = "disabled";
+ };
+
+ mdio@24000 {
+ status = "disabled";
+ };
+
+ mdio@25000 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ status = "disabled";
+ };
+
+ enet2: ethernet@b2000 {
+ status = "disabled";
+ };
+
+ usb@22000 {
+ status = "disabled";
+ };
+
+ sdhci@2e000 {
+ status = "disabled";
+ };
+
+ mpic: pic@40000 {
+ protected-sources = <
+ 16 /* ecm, mem, L2, pci0, pci1 */
+ 43 42 59 /* i2c, serial0, spi */
+ 47 63 62 /* gpio, tdm */
+ 20 21 22 23 /* dma */
+ 03 02 /* mdio */
+ 35 36 40 /* enet1-queue-group0 */
+ 51 52 67 /* enet1-queue-group1 */
+ 31 32 33 /* enet2-queue-group0 */
+ 25 26 27 /* enet2-queue-group1 */
+ 28 72 58 /* usb, sdhci, crypto */
+ 0xb0 0xb1 0xb2 /* message */
+ 0xb3 0xb4 0xb5
+ 0xb6 0xb7
+ 0xe0 0xe1 0xe2 /* msi */
+ 0xe3 0xe4 0xe5
+ 0xe6 0xe7 /* sdhci, crypto , pci */
+ >;
+ };
+
+ msi@41600 {
+ status = "disabled";
+ };
+
+ global-utilities@e0000 { //global utilities block
+ status = "disabled";
+ };
+
+ };
+
+ pci0: pcie@ffe09000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe0a000 {
+ status = "disabled";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
new file mode 100644
index 0000000..5c5acb6
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -0,0 +1,377 @@
+/*
+ * P1020si Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+
+ };
+
+ mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+
+ };
+
+ enet0: ethernet@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 30 2 34 2>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 18 2 24 2>;
+ };
+ };
+
+ enet1: ethernet@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 36 2 40 2>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 52 2 67 2>;
+ };
+ };
+
+ enet2: ethernet@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 32 2 33 2>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 26 2 27 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <46 0x2>;
+ phy_type = "ulpi";
+ };
+ */
+
+ sdhci@2e000 {
+ compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p1020-guts","fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 59ef405..4f685a7 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -52,7 +52,7 @@
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
+ interrupts = <19 2 0 0>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -157,7 +157,7 @@
* IRQ8 is generated if the "EVENT" switch is pressed
* and PX_CTL[EVESEL] is set to 00.
*/
- interrupts = <8 8>;
+ interrupts = <8 8 0 0>;
};
};
@@ -178,13 +178,13 @@
ecm@1000 {
compatible = "fsl,p1022-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1022-memory-controller";
reg = <0x2000 0x1000>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
i2c@3000 {
@@ -193,7 +193,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -203,7 +203,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
+ interrupts = <43 2 0 0>;
dfsrr;
wm8776:codec@1a {
@@ -220,7 +220,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -229,7 +229,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
+ interrupts = <42 2 0 0>;
};
spi@7000 {
@@ -238,7 +238,7 @@
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
+ interrupts = <59 0x2 0 0>;
espi,num-ss-bits = <4>;
mode = "cpu";
@@ -275,7 +275,7 @@
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <0x15000 0x100>;
- interrupts = <75 2>;
+ interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,playback-dma = <&dma00>;
@@ -294,25 +294,25 @@
compatible = "fsl,ssi-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupts = <76 2>;
+ interrupts = <76 2 0 0>;
};
dma01: dma-channel@80 {
compatible = "fsl,ssi-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupts = <77 2>;
+ interrupts = <77 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupts = <78 2>;
+ interrupts = <78 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupts = <79 2>;
+ interrupts = <79 2 0 0>;
};
};
@@ -320,7 +320,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -329,7 +329,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma@21300 {
@@ -343,25 +343,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -370,7 +370,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
@@ -381,11 +381,11 @@
reg = <0x24000 0x1000 0xb0030 0x4>;
phy0: ethernet-phy@0 {
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
- interrupts = <9 1>;
+ interrupts = <9 1 0 0>;
reg = <0x2>;
};
};
@@ -416,13 +416,13 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
};
};
@@ -443,20 +443,20 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
};
};
sdhci@2e000 {
compatible = "fsl,p1022-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
+ interrupts = <72 0x2 0 0>;
fsl,sdhci-auto-cmd12;
/* Filled in by U-Boot */
clock-frequency = <0>;
@@ -467,7 +467,7 @@
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
@@ -478,14 +478,14 @@
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
reg = <0x18000 0x1000>;
cell-index = <1>;
- interrupts = <74 0x2>;
+ interrupts = <74 0x2 0 0>;
};
sata@19000 {
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
reg = <0x19000 0x1000>;
cell-index = <2>;
- interrupts = <41 0x2>;
+ interrupts = <41 0x2 0 0>;
};
power@e0070{
@@ -496,21 +496,33 @@
display@10000 {
compatible = "fsl,diu", "fsl,p1022-diu";
reg = <0x10000 1000>;
- interrupts = <64 2>;
+ interrupts = <64 2 0 0>;
};
timer@41100 {
compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x204>;
- interrupts = <0xf7 0x2>;
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic";
device_type = "open-pic";
};
@@ -519,14 +531,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
@@ -547,7 +559,7 @@
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -582,7 +594,7 @@
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -618,7 +630,7 @@
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
clock-frequency = <33333333>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 1101914..2bcf368 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -1,7 +1,7 @@
/*
* P2020 DS Device Tree Source
*
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,12 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
/ {
- model = "fsl,P2020";
+ model = "fsl,P2020DS";
compatible = "fsl,P2020DS";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
ethernet0 = &enet0;
@@ -27,35 +26,13 @@
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
compatible = "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
-
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -158,352 +135,77 @@
};
soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512k
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
+ };
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
msi@41600 {
compatible = "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -528,18 +230,8 @@
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
@@ -667,18 +359,8 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index e2d48fd..3782a58 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,12 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
/ {
- model = "fsl,P2020";
+ model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
ethernet0 = &enet0;
@@ -26,34 +25,11 @@
pci1 = &pci1;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
};
localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,90 +141,16 @@
};
soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
+ spi@7000 {
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ fsl_m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,espi-flash";
@@ -294,254 +196,68 @@
};
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25520 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ status = "disabled";
+ };
+
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- };
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
+ pci0: pcie@ffe08000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- pcie@0 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
@@ -556,19 +272,17 @@
};
};
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
+ pci2: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index b69c3a5..fc8ddddf 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,12 +14,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
/ {
- model = "fsl,P2020";
+ model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
ethernet1 = &enet1;
@@ -29,91 +28,33 @@
};
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
+ PowerPC,P2020@1 {
+ status = "disabled";
};
+
};
memory {
device_type = "memory";
};
+ localbus@ffe05000 {
+ status = "disabled";
+ };
+
soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ serial1: serial@4600 {
+ status = "disabled";
};
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
fsl_m25p80@0 {
#address-cells = <1>;
@@ -161,76 +102,15 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ dma@c300 {
+ status = "disabled";
};
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
@@ -245,29 +125,21 @@
};
mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
+ mdio@26520 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@24000 {
+ status = "disabled";
+ };
+
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
@@ -275,49 +147,12 @@
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
protected-sources = <
42 76 77 78 79 /* serial1 , dma2 */
29 30 34 26 /* enet0, pci1 */
@@ -326,26 +161,28 @@
>;
};
- global-utilities@e0000 {
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
+ msi@41600 {
+ status = "disabled";
};
+
+
};
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
+ pci0: pcie@ffe08000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
@@ -360,4 +197,8 @@
0x0 0x100000>;
};
};
+
+ pci2: pcie@ffe0a000 {
+ status = "disabled";
+ };
};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 7a31d46c..261c34b 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,27 +15,21 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
/ {
- model = "fsl,P2020";
+ model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
ethernet0 = &enet0;
- serial0 = &serial0;
+ serial0 = &serial1;
pci1 = &pci1;
};
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
+ PowerPC,P2020@0 {
+ status = "disabled";
};
};
@@ -43,20 +37,37 @@
device_type = "memory";
};
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
+ localbus@ffe05000 {
+ status = "disabled";
+ };
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ soc@ffe00000 {
+ ecm-law@0 {
+ status = "disabled";
+ };
+
+ ecm@1000 {
+ status = "disabled";
+ };
+
+ memory-controller@2000 {
+ status = "disabled";
+ };
+
+ i2c@3000 {
+ status = "disabled";
+ };
+
+ i2c@3100 {
+ status = "disabled";
+ };
+
+ serial0: serial@4500 {
+ status = "disabled";
+ };
+
+ spi@7000 {
+ status = "disabled";
};
dma@c300 {
@@ -96,6 +107,10 @@
};
};
+ gpio: gpio-controller@f000 {
+ status = "disabled";
+ };
+
L2: l2-cache-controller@20000 {
compatible = "fsl,p2020-l2-cache-controller";
reg = <0x20000 0x1000>;
@@ -104,31 +119,49 @@
interrupt-parent = <&mpic>;
};
+ dma@21300 {
+ status = "disabled";
+ };
+
+ usb@22000 {
+ status = "disabled";
+ };
+
+ mdio@24520 {
+ status = "disabled";
+ };
+
+ mdio@25520 {
+ status = "disabled";
+ };
+
+ mdio@26520 {
+ status = "disabled";
+ };
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
+ enet1: ethernet@25000 {
+ status = "disabled";
+ };
+
+ enet2: ethernet@26000 {
+ status = "disabled";
+ };
+
+ sdhci@2e000 {
+ status = "disabled";
+ };
+
+ crypto@30000 {
+ status = "disabled";
+ };
+
mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
protected-sources = <
17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
16 20 21 22 23 28 /* L2, dma1, USB */
@@ -152,21 +185,32 @@
0xe7 0>;
interrupt-parent = <&mpic>;
};
+
+ global-utilities@e0000 { //global utilities block
+ status = "disabled";
+ };
+
};
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
+ pci0: pcie@ffe08000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe09000 {
+ status = "disabled";
+ };
+
+ pci2: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
new file mode 100644
index 0000000..6def17f
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020si.dtsi
@@ -0,0 +1,382 @@
+/*
+ * P2020 Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe08000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe08000 0 0x1000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ };
+
+ pci1: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ };
+
+ pci2: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index 5b7fc29..927f94d 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -1,7 +1,7 @@
/*
* P4080DS Device Tree Source
*
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -33,6 +33,17 @@
dma1 = &dma1;
sdhc = &sdhc;
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+
rio0 = &rapidio0;
};
@@ -410,6 +421,79 @@
dr_mode = "host";
phy_type = "ulpi";
};
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <89 2>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <90 2>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <91 2>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2>;
+ };
};
rapidio0: rapidio@ffe0c0000 {
diff --git a/arch/powerpc/boot/epapr.c b/arch/powerpc/boot/epapr.c
new file mode 100644
index 0000000..06c1961
--- /dev/null
+++ b/arch/powerpc/boot/epapr.c
@@ -0,0 +1,66 @@
+/*
+ * Bootwrapper for ePAPR compliant firmwares
+ *
+ * Copyright 2010 David Gibson <david@gibson.dropbear.id.au>, IBM Corporation.
+ *
+ * Based on earlier bootwrappers by:
+ * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\
+ * and
+ * Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "io.h"
+#include <libfdt.h>
+
+BSS_STACK(4096);
+
+#define EPAPR_SMAGIC 0x65504150
+#define EPAPR_EMAGIC 0x45504150
+
+static unsigned epapr_magic;
+static unsigned long ima_size;
+static unsigned long fdt_addr;
+
+static void platform_fixups(void)
+{
+ if ((epapr_magic != EPAPR_EMAGIC)
+ && (epapr_magic != EPAPR_SMAGIC))
+ fatal("r6 contained 0x%08x instead of ePAPR magic number\n",
+ epapr_magic);
+
+ if (ima_size < (unsigned long)_end)
+ printf("WARNING: Image loaded outside IMA!"
+ " (_end=%p, ima_size=0x%lx)\n", _end, ima_size);
+ if (ima_size < fdt_addr)
+ printf("WARNING: Device tree address is outside IMA!"
+ "(fdt_addr=0x%lx, ima_size=0x%lx)\n", fdt_addr,
+ ima_size);
+ if (ima_size < fdt_addr + fdt_totalsize((void *)fdt_addr))
+ printf("WARNING: Device tree extends outside IMA!"
+ " (fdt_addr=0x%lx, size=0x%x, ima_size=0x%lx\n",
+ fdt_addr, fdt_totalsize((void *)fdt_addr), ima_size);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ epapr_magic = r6;
+ ima_size = r7;
+ fdt_addr = r3;
+
+ /* FIXME: we should process reserve entries */
+
+ simple_alloc_init(_end, ima_size - (unsigned long)_end, 32, 64);
+
+ fdt_init((void *)fdt_addr);
+
+ serial_console_init();
+ platform_ops.fixups = platform_fixups;
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index cb97e75..c74531a 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -39,6 +39,7 @@
cacheit=
binary=
gzip=.gz
+pie=
# cross-compilation prefix
CROSS=
@@ -157,9 +158,10 @@
platformo=$object/of.o
;;
coff)
- platformo=$object/of.o
+ platformo="$object/crt0.o $object/of.o"
lds=$object/zImage.coff.lds
link_address='0x500000'
+ pie=
;;
miboot|uboot)
# miboot and U-boot want just the bare bits, not an ELF binary
@@ -208,6 +210,7 @@
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
link_address=''
+ pie=
;;
ep88xc|ep405|ep8248e)
platformo="$object/fixed-head.o $object/$platform.o"
@@ -244,6 +247,10 @@
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
+epapr)
+ link_address='0x20000000'
+ pie=-pie
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -251,7 +258,7 @@
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
if [ -n "$gzip" ]; then
- gzip -f -9 "$vmz.$$"
+ gzip -n -f -9 "$vmz.$$"
fi
if [ -n "$cacheit" ]; then
@@ -310,9 +317,9 @@
if [ "$platform" != "miboot" ]; then
if [ -n "$link_address" ] ; then
- text_start="-Ttext $link_address --defsym _start=$link_address"
+ text_start="-Ttext $link_address"
fi
- ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
+ ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
$platformo $tmp $object/wrapper.a
rm $tmp
fi
@@ -336,7 +343,7 @@
$objbin/hack-coff "$ofile"
;;
cuboot*)
- gzip -f -9 "$ofile"
+ gzip -n -f -9 "$ofile"
${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$uboot_version -d "$ofile".gz "$ofile"
;;
@@ -383,6 +390,6 @@
odir="$(dirname "$ofile.bin")"
rm -f "$odir/otheros.bld"
- gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
+ gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
;;
esac
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index 856dc78..de4c9e3 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -3,13 +3,13 @@
EXTERN(_zimage_start_opd)
SECTIONS
{
- _start = .;
.text :
{
+ _start = .;
*(.text)
*(.fixup)
+ _etext = .;
}
- _etext = .;
. = ALIGN(4096);
.data :
{
@@ -17,9 +17,7 @@
*(.data*)
*(__builtin_*)
*(.sdata*)
- __got2_start = .;
*(.got2)
- __got2_end = .;
_dtb_start = .;
*(.kernel:dtb)
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 0962d62..2bd8731 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -3,49 +3,64 @@
EXTERN(_zimage_start)
SECTIONS
{
- _start = .;
.text :
{
+ _start = .;
*(.text)
*(.fixup)
+ _etext = .;
}
- _etext = .;
. = ALIGN(4096);
.data :
{
*(.rodata*)
*(.data*)
*(.sdata*)
- __got2_start = .;
*(.got2)
- __got2_end = .;
}
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .dynamic :
+ {
+ __dynamic_start = .;
+ *(.dynamic)
+ }
+ .hash : { *(.hash) }
+ .interp : { *(.interp) }
+ .rela.dyn : { *(.rela*) }
. = ALIGN(8);
- _dtb_start = .;
- .kernel:dtb : { *(.kernel:dtb) }
- _dtb_end = .;
+ .kernel:dtb :
+ {
+ _dtb_start = .;
+ *(.kernel:dtb)
+ _dtb_end = .;
+ }
. = ALIGN(4096);
- _vmlinux_start = .;
- .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
- _vmlinux_end = .;
+ .kernel:vmlinux.strip :
+ {
+ _vmlinux_start = .;
+ *(.kernel:vmlinux.strip)
+ _vmlinux_end = .;
+ }
. = ALIGN(4096);
- _initrd_start = .;
- .kernel:initrd : { *(.kernel:initrd) }
- _initrd_end = .;
+ .kernel:initrd :
+ {
+ _initrd_start = .;
+ *(.kernel:initrd)
+ _initrd_end = .;
+ }
. = ALIGN(4096);
- _edata = .;
-
- . = ALIGN(4096);
- __bss_start = .;
.bss :
{
- *(.sbss)
- *(.bss)
+ _edata = .;
+ __bss_start = .;
+ *(.sbss)
+ *(.bss)
+ *(COMMON)
+ _end = . ;
}
- . = ALIGN(4096);
- _end = . ;
}
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c683bce..126ef1b0 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -104,7 +104,6 @@
CONFIG_PARTITION_ADVANCED=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index a721cd3..abcf00a 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -101,7 +101,6 @@
CONFIG_PARTITION_ADVANCED=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 55e0725..11662c2 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -58,7 +58,6 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index d724095..ebe9b30b 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -59,7 +59,6 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 4b44bea..eb25229 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -63,7 +63,6 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index b614508d..f51c7eb 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -168,7 +168,6 @@
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index f9e6a3e..2a84fd7 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -132,8 +132,8 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_IND=y
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig
index 9fa1613..d322835 100644
--- a/arch/powerpc/configs/e55xx_smp_defconfig
+++ b/arch/powerpc/configs/e55xx_smp_defconfig
@@ -6,10 +6,10 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
@@ -25,8 +25,32 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
-CONFIG_SPARSE_IRQ=y
# CONFIG_PCI is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
@@ -34,6 +58,9 @@
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -64,22 +91,14 @@
CONFIG_NLS_UTF8=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=m
CONFIG_FRAME_WARN=1024
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c06a86c..96b89df 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -204,7 +204,6 @@
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 942ced9..de65841 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -206,7 +206,6 @@
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 038a308..a1cc817 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -171,7 +171,6 @@
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ac4fc41..f8b394a 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -112,8 +112,8 @@
CONFIG_IRDA_FAST_RR=y
CONFIG_IRTTY_SIR=m
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 0a10fb0..2142089 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -351,8 +351,8 @@
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index caba919..6472322 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -52,8 +52,8 @@
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 249ddd0..7de1386 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -146,12 +146,18 @@
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
CONFIG_SCSI_IBMVSCSI=y
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_IPR=y
CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_ATA=y
# CONFIG_ATA_SFF is not set
@@ -197,6 +203,8 @@
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_MLX4_EN=m
+CONFIG_QLGE=m
+CONFIG_BE2NET=m
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 6b6dc20..bdf0563 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -393,8 +393,8 @@
uint fec_addr_low; /* lower 32 bits of station address */
ushort fec_addr_high; /* upper 16 bits of station address */
ushort res1; /* reserved */
- uint fec_hash_table_high; /* upper 32-bits of hash table */
- uint fec_hash_table_low; /* lower 32-bits of hash table */
+ uint fec_grp_hash_table_high; /* upper 32-bits of hash table */
+ uint fec_grp_hash_table_low; /* lower 32-bits of hash table */
uint fec_r_des_start; /* beginning of Rx descriptor ring */
uint fec_x_des_start; /* beginning of Tx descriptor ring */
uint fec_r_buff_size; /* Rx buffer size */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 1833d1a..c0d842c 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -157,6 +157,7 @@
#define CPU_FTR_476_DD2 ASM_CONST(0x0000000000010000)
#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000)
#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000)
+#define CPU_FTR_DEBUG_LVL_EXC ASM_CONST(0x0000000000080000)
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000)
#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000)
@@ -178,22 +179,18 @@
#define LONG_ASM_CONST(x) 0
#endif
-#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000)
+
+#define CPU_FTR_HVMODE_206 LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_CFAR LONG_ASM_CONST(0x0000001000000000)
#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000)
#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000)
#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000)
-#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000)
#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000)
#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000)
#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000)
#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000)
#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000)
-#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000)
-#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000)
#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000)
#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000)
#define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000)
@@ -202,12 +199,14 @@
#define CPU_FTR_STCX_CHECKS_ADDRESS LONG_ASM_CONST(0x0200000000000000)
#define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0400000000000000)
#define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0800000000000000)
+#define CPU_FTR_ICSWX LONG_ASM_CONST(0x1000000000000000)
#ifndef __ASSEMBLY__
-#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \
- CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
- CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
+#define MMU_FTR_PPCAS_ARCH_V2 (MMU_FTR_SLB | MMU_FTR_TLBIEL | \
+ MMU_FTR_16M_PAGE)
/* We only set the altivec features if the kernel was compiled with altivec
* support
@@ -387,7 +386,8 @@
CPU_FTR_DBELL)
#define CPU_FTRS_E5500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
- CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+ CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+ CPU_FTR_DEBUG_LVL_EXC)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
@@ -407,44 +407,45 @@
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
- CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
- CPU_FTR_PURR | CPU_FTR_STCX_CHECKS_ADDRESS | \
- CPU_FTR_POPCNTB)
+ CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
- CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+ CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
- CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_HVMODE_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
- CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+ CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
- CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+ CPU_FTR_ICSWX | CPU_FTR_CFAR)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
- CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
- CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
+ CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
CPU_FTR_UNALIGNED_LD_STD)
#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_PPCAS_ARCH_V2 | \
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
- CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_PURR | CPU_FTR_REAL_LE)
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
+#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
+ CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500)
+#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500 | CPU_FTRS_A2)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
- CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+ CPU_FTR_VSX)
#endif
#else
enum {
@@ -487,7 +488,7 @@
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500)
+#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500 & CPU_FTRS_A2)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index f71bb4c..ce516e5 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -37,16 +37,16 @@
* This can typically be used for things like IPI for tlb invalidations
* since those need to be done only once per core/TLB
*/
-static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads)
{
cpumask_t tmp, res;
int i;
- res = CPU_MASK_NONE;
+ cpumask_clear(&res);
for (i = 0; i < NR_CPUS; i += threads_per_core) {
- cpus_shift_left(tmp, threads_core_mask, i);
- if (cpus_intersects(threads, tmp))
- cpu_set(i, res);
+ cpumask_shift_left(&tmp, &threads_core_mask, i);
+ if (cpumask_intersects(threads, &tmp))
+ cpumask_set_cpu(i, &res);
}
return res;
}
@@ -58,7 +58,7 @@
static inline cpumask_t cpu_online_cores_map(void)
{
- return cpu_thread_mask_to_cores(cpu_online_map);
+ return cpu_thread_mask_to_cores(cpu_online_mask);
}
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 0893ab9..9c70d0c 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -27,9 +27,8 @@
PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */
};
-extern void doorbell_message_pass(int target, int msg);
+extern void doorbell_cause_ipi(int cpu, unsigned long data);
extern void doorbell_exception(struct pt_regs *regs);
-extern void doorbell_check_self(void);
extern void doorbell_setup_this_cpu(void);
static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
index f0fb4fc..4592167 100644
--- a/arch/powerpc/include/asm/emulated_ops.h
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -52,6 +52,10 @@
#ifdef CONFIG_VSX
struct ppc_emulated_entry vsx;
#endif
+#ifdef CONFIG_PPC64
+ struct ppc_emulated_entry mfdscr;
+ struct ppc_emulated_entry mtdscr;
+#endif
} ppc_emulated;
extern u32 ppc_warn_emulated;
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 7778d6f..f5dfe34 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -46,6 +46,7 @@
#define EX_CCR 60
#define EX_R3 64
#define EX_LR 72
+#define EX_CFAR 80
/*
* We're short on space and time in the exception prolog, so we can't
@@ -56,30 +57,40 @@
#define LOAD_HANDLER(reg, label) \
addi reg,reg,(label)-_stext; /* virt addr of handler ... */
-#define EXCEPTION_PROLOG_1(area) \
- mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \
+/* Exception register prefixes */
+#define EXC_HV H
+#define EXC_STD
+
+#define EXCEPTION_PROLOG_1(area) \
+ GET_PACA(r13); \
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
std r10,area+EX_R10(r13); \
std r11,area+EX_R11(r13); \
std r12,area+EX_R12(r13); \
- mfspr r9,SPRN_SPRG_SCRATCH0; \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mfspr r10,SPRN_CFAR; \
+ std r10,area+EX_CFAR(r13); \
+ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
+ GET_SCRATCH0(r9); \
std r9,area+EX_R13(r13); \
mfcr r9
-#define EXCEPTION_PROLOG_PSERIES_1(label) \
+#define __EXCEPTION_PROLOG_PSERIES_1(label, h) \
ld r12,PACAKBASE(r13); /* get high part of &label */ \
ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
- mfspr r11,SPRN_SRR0; /* save SRR0 */ \
+ mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label) \
- mtspr SPRN_SRR0,r12; \
- mfspr r12,SPRN_SRR1; /* and SRR1 */ \
- mtspr SPRN_SRR1,r10; \
- rfid; \
+ mtspr SPRN_##h##SRR0,r12; \
+ mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
+ mtspr SPRN_##h##SRR1,r10; \
+ h##rfid; \
b . /* prevent speculative execution */
+#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
+ __EXCEPTION_PROLOG_PSERIES_1(label, h)
-#define EXCEPTION_PROLOG_PSERIES(area, label) \
+#define EXCEPTION_PROLOG_PSERIES(area, label, h) \
EXCEPTION_PROLOG_1(area); \
- EXCEPTION_PROLOG_PSERIES_1(label);
+ EXCEPTION_PROLOG_PSERIES_1(label, h);
/*
* The common exception prolog is used for all except a few exceptions
@@ -98,10 +109,11 @@
beq- 1f; \
ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \
- bge- cr1,2f; /* abort if it is */ \
- b 3f; \
-2: li r1,(n); /* will be reloaded later */ \
+ blt+ cr1,3f; /* abort if it is */ \
+ li r1,(n); /* will be reloaded later */ \
sth r1,PACA_TRAP_SAVE(r13); \
+ std r3,area+EX_R3(r13); \
+ addi r3,r13,area; /* r3 -> where regs are saved*/ \
b bad_stack; \
3: std r9,_CCR(r1); /* save CR in stackframe */ \
std r11,_NIP(r1); /* save SRR0 in stackframe */ \
@@ -123,6 +135,10 @@
std r9,GPR11(r1); \
std r10,GPR12(r1); \
std r11,GPR13(r1); \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ ld r10,area+EX_CFAR(r13); \
+ std r10,ORIG_GPR3(r1); \
+ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
mflr r9; /* save LR in stackframe */ \
std r9,_LINK(r1); \
@@ -143,57 +159,62 @@
/*
* Exception vectors.
*/
-#define STD_EXCEPTION_PSERIES(n, label) \
- . = n; \
+#define STD_EXCEPTION_PSERIES(loc, vec, label) \
+ . = loc; \
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
- DO_KVM n; \
- mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+ DO_KVM vec; \
+ SET_SCRATCH0(r13); /* save r13 */ \
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_STD)
-#define HSTD_EXCEPTION_PSERIES(n, label) \
- . = n; \
- .globl label##_pSeries; \
-label##_pSeries: \
+#define STD_EXCEPTION_HV(loc, vec, label) \
+ . = loc; \
+ .globl label##_hv; \
+label##_hv: \
HMT_MEDIUM; \
- mtspr SPRN_SPRG_SCRATCH0,r20; /* save r20 */ \
- mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \
- mtspr SPRN_SRR0,r20; \
- mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \
- mtspr SPRN_SRR1,r20; \
- mfspr r20,SPRN_SPRG_SCRATCH0; /* restore r20 */ \
- mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+ DO_KVM vec; \
+ SET_SCRATCH0(r13); /* save r13 */ \
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_HV)
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label) \
- . = n; \
- .globl label##_pSeries; \
-label##_pSeries: \
+#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h) \
HMT_MEDIUM; \
- DO_KVM n; \
- mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
- mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \
+ DO_KVM vec; \
+ SET_SCRATCH0(r13); /* save r13 */ \
+ GET_PACA(r13); \
std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \
std r10,PACA_EXGEN+EX_R10(r13); \
lbz r10,PACASOFTIRQEN(r13); \
mfcr r9; \
cmpwi r10,0; \
- beq masked_interrupt; \
- mfspr r10,SPRN_SPRG_SCRATCH0; \
+ beq masked_##h##interrupt; \
+ GET_SCRATCH0(r10); \
std r10,PACA_EXGEN+EX_R13(r13); \
std r11,PACA_EXGEN+EX_R11(r13); \
std r12,PACA_EXGEN+EX_R12(r13); \
ld r12,PACAKBASE(r13); /* get high part of &label */ \
ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
- mfspr r11,SPRN_SRR0; /* save SRR0 */ \
+ mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label##_common) \
- mtspr SPRN_SRR0,r12; \
- mfspr r12,SPRN_SRR1; /* and SRR1 */ \
- mtspr SPRN_SRR1,r10; \
- rfid; \
+ mtspr SPRN_##h##SRR0,r12; \
+ mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
+ mtspr SPRN_##h##SRR1,r10; \
+ h##rfid; \
b . /* prevent speculative execution */
+#define _MASKABLE_EXCEPTION_PSERIES(vec, label, h) \
+ __MASKABLE_EXCEPTION_PSERIES(vec, label, h)
+
+#define MASKABLE_EXCEPTION_PSERIES(loc, vec, label) \
+ . = loc; \
+ .globl label##_pSeries; \
+label##_pSeries: \
+ _MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_STD)
+
+#define MASKABLE_EXCEPTION_HV(loc, vec, label) \
+ . = loc; \
+ .globl label##_hv; \
+label##_hv: \
+ _MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_HV)
#ifdef CONFIG_PPC_ISERIES
#define DISABLE_INTS \
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index 921a847..9a67a38 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -49,7 +49,7 @@
FTR_ENTRY_OFFSET label##2b-label##5b; \
FTR_ENTRY_OFFSET label##3b-label##5b; \
FTR_ENTRY_OFFSET label##4b-label##5b; \
- .ifgt (label##4b-label##3b)-(label##2b-label##1b); \
+ .ifgt (label##4b- label##3b)-(label##2b- label##1b); \
.error "Feature section else case larger than body"; \
.endif; \
.popsection;
@@ -146,6 +146,19 @@
#ifndef __ASSEMBLY__
+#define ASM_FTR_IF(section_if, section_else, msk, val) \
+ stringify_in_c(BEGIN_FTR_SECTION) \
+ section_if "; " \
+ stringify_in_c(FTR_SECTION_ELSE) \
+ section_else "; " \
+ stringify_in_c(ALT_FTR_SECTION_END((msk), (val)))
+
+#define ASM_FTR_IFSET(section_if, section_else, msk) \
+ ASM_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_FTR_IFCLR(section_if, section_else, msk) \
+ ASM_FTR_IF(section_if, section_else, (msk), 0)
+
#define ASM_MMU_FTR_IF(section_if, section_else, msk, val) \
stringify_in_c(BEGIN_MMU_FTR_SECTION) \
section_if "; " \
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 4ef662e..3a6c586 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -47,6 +47,7 @@
#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000)
#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
#define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
#ifndef __ASSEMBLY__
@@ -60,7 +61,7 @@
FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
- FW_FEATURE_CMO | FW_FEATURE_VPHN,
+ FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 8edec71..852b8c1 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -102,6 +102,7 @@
#define H_ANDCOND (1UL<<(63-33))
#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
+#define H_COALESCE_CAND (1UL<<(63-42)) /* page is a good candidate for coalescing */
#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
#define H_COPY_PAGE (1UL<<(63-49))
#define H_N (1UL<<(63-61))
@@ -234,6 +235,7 @@
#define H_GET_MPP 0x2D4
#define H_HOME_NODE_ASSOCIATIVITY 0x2EC
#define H_BEST_ENERGY 0x2F4
+#define H_GET_MPP_X 0x314
#define MAX_HCALL_OPCODE H_BEST_ENERGY
#ifndef __ASSEMBLY__
@@ -312,6 +314,16 @@
int h_get_mpp(struct hvcall_mpp_data *);
+struct hvcall_mpp_x_data {
+ unsigned long coalesced_bytes;
+ unsigned long pool_coalesced_bytes;
+ unsigned long pool_purr_cycles;
+ unsigned long pool_spurr_cycles;
+ unsigned long reserved[3];
+};
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
+
#ifdef CONFIG_PPC_PSERIES
extern int CMO_PrPSP;
extern int CMO_SecPSP;
diff --git a/arch/powerpc/platforms/cell/io-workarounds.h b/arch/powerpc/include/asm/io-workarounds.h
similarity index 97%
rename from arch/powerpc/platforms/cell/io-workarounds.h
rename to arch/powerpc/include/asm/io-workarounds.h
index 6efc778..fbae492 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.h
+++ b/arch/powerpc/include/asm/io-workarounds.h
@@ -31,7 +31,6 @@
void *private;
};
-void __devinit io_workaround_init(void);
void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
int (*)(struct iowa_bus *, void *), void *);
struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 001f2f1..45698d5 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -2,6 +2,8 @@
#define _ASM_POWERPC_IO_H
#ifdef __KERNEL__
+#define ARCH_HAS_IOREMAP_WC
+
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -481,10 +483,16 @@
_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
#endif /* !CONFIG_EEH */
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x) x
+#ifdef CONFIG_PPC_INDIRECT_PIO
+#define DEF_PCI_HOOK_pio(x) x
#else
-#define DEF_PCI_HOOK(x) NULL
+#define DEF_PCI_HOOK_pio(x) NULL
+#endif
+
+#ifdef CONFIG_PPC_INDIRECT_MMIO
+#define DEF_PCI_HOOK_mem(x) x
+#else
+#define DEF_PCI_HOOK_mem(x) NULL
#endif
/* Structure containing all the hooks */
@@ -504,7 +512,7 @@
#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
static inline ret name at \
{ \
- if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
+ if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL) \
return ppc_pci_io.name al; \
return __do_##name al; \
}
@@ -512,7 +520,7 @@
#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
static inline void name at \
{ \
- if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
+ if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL) \
ppc_pci_io.name al; \
else \
__do_##name al; \
@@ -616,12 +624,13 @@
* * ioremap is the standard one and provides non-cacheable guarded mappings
* and can be hooked by the platform via ppc_md
*
- * * ioremap_flags allows to specify the page flags as an argument and can
- * also be hooked by the platform via ppc_md. ioremap_prot is the exact
- * same thing as ioremap_flags.
+ * * ioremap_prot allows to specify the page flags as an argument and can
+ * also be hooked by the platform via ppc_md.
*
* * ioremap_nocache is identical to ioremap
*
+ * * ioremap_wc enables write combining
+ *
* * iounmap undoes such a mapping and can be hooked
*
* * __ioremap_at (and the pending __iounmap_at) are low level functions to
@@ -629,7 +638,7 @@
* currently be hooked. Must be page aligned.
*
* * __ioremap is the low level implementation used by ioremap and
- * ioremap_flags and cannot be hooked (but can be used by a hook on one
+ * ioremap_prot and cannot be hooked (but can be used by a hook on one
* of the previous ones)
*
* * __ioremap_caller is the same as above but takes an explicit caller
@@ -640,10 +649,10 @@
*
*/
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
- unsigned long flags);
+extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
+ unsigned long flags);
+extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
#define ioremap_nocache(addr, size) ioremap((addr), (size))
-#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot))
extern void iounmap(volatile void __iomem *addr);
diff --git a/arch/powerpc/include/asm/io_event_irq.h b/arch/powerpc/include/asm/io_event_irq.h
new file mode 100644
index 0000000..b1a9a1b
--- /dev/null
+++ b/arch/powerpc/include/asm/io_event_irq.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2010, 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_IO_EVENT_IRQ_H
+#define _ASM_POWERPC_IO_EVENT_IRQ_H
+
+#include <linux/types.h>
+#include <linux/notifier.h>
+
+#define PSERIES_IOEI_RPC_MAX_LEN 216
+
+#define PSERIES_IOEI_TYPE_ERR_DETECTED 0x01
+#define PSERIES_IOEI_TYPE_ERR_RECOVERED 0x02
+#define PSERIES_IOEI_TYPE_EVENT 0x03
+#define PSERIES_IOEI_TYPE_RPC_PASS_THRU 0x04
+
+#define PSERIES_IOEI_SUBTYPE_NOT_APP 0x00
+#define PSERIES_IOEI_SUBTYPE_REBALANCE_REQ 0x01
+#define PSERIES_IOEI_SUBTYPE_NODE_ONLINE 0x03
+#define PSERIES_IOEI_SUBTYPE_NODE_OFFLINE 0x04
+#define PSERIES_IOEI_SUBTYPE_DUMP_SIZE_CHANGE 0x05
+#define PSERIES_IOEI_SUBTYPE_TORRENT_IRV_UPDATE 0x06
+#define PSERIES_IOEI_SUBTYPE_TORRENT_HFI_CFGED 0x07
+
+#define PSERIES_IOEI_SCOPE_NOT_APP 0x00
+#define PSERIES_IOEI_SCOPE_RIO_HUB 0x36
+#define PSERIES_IOEI_SCOPE_RIO_BRIDGE 0x37
+#define PSERIES_IOEI_SCOPE_PHB 0x38
+#define PSERIES_IOEI_SCOPE_EADS_GLOBAL 0x39
+#define PSERIES_IOEI_SCOPE_EADS_SLOT 0x3A
+#define PSERIES_IOEI_SCOPE_TORRENT_HUB 0x3B
+#define PSERIES_IOEI_SCOPE_SERVICE_PROC 0x51
+
+/* Platform Event Log Format, Version 6, data portition of IO event section */
+struct pseries_io_event {
+ uint8_t event_type; /* 0x00 IO-Event Type */
+ uint8_t rpc_data_len; /* 0x01 RPC data length */
+ uint8_t scope; /* 0x02 Error/Event Scope */
+ uint8_t event_subtype; /* 0x03 I/O-Event Sub-Type */
+ uint32_t drc_index; /* 0x04 DRC Index */
+ uint8_t rpc_data[PSERIES_IOEI_RPC_MAX_LEN];
+ /* 0x08 RPC Data (0-216 bytes, */
+ /* padded to 4 bytes alignment) */
+};
+
+extern struct atomic_notifier_head pseries_ioei_notifier_list;
+
+#endif /* _ASM_POWERPC_IO_EVENT_IRQ_H */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 67ab5fb..1bff591 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -88,9 +88,6 @@
/* Dispose of such a mapping */
void (*unmap)(struct irq_host *h, unsigned int virq);
- /* Update of such a mapping */
- void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
/* Translate device-tree interrupt specifier from raw format coming
* from the firmware to a irq_hw_number_t (interrupt line number) and
* type (sense) that can be passed to set_irq_type(). In the absence
@@ -128,19 +125,10 @@
struct device_node *of_node;
};
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
- irq_hw_number_t hwirq;
- struct irq_host *host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
+struct irq_data;
+extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
extern irq_hw_number_t virq_to_hw(unsigned int virq);
+extern bool virq_is_host(unsigned int virq, struct irq_host *host);
/**
* irq_alloc_host - Allocate a new irq_host data structure
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index f54408d..8a33698 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -76,7 +76,7 @@
extern cpumask_t cpus_in_sr;
static inline int kexec_sr_activated(int cpu)
{
- return cpu_isset(cpu,cpus_in_sr);
+ return cpumask_test_cpu(cpu, &cpus_in_sr);
}
struct kimage;
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 5b75046..0951b17 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -59,6 +59,7 @@
#define BOOK3S_INTERRUPT_INST_SEGMENT 0x480
#define BOOK3S_INTERRUPT_EXTERNAL 0x500
#define BOOK3S_INTERRUPT_EXTERNAL_LEVEL 0x501
+#define BOOK3S_INTERRUPT_EXTERNAL_HV 0x502
#define BOOK3S_INTERRUPT_ALIGNMENT 0x600
#define BOOK3S_INTERRUPT_PROGRAM 0x700
#define BOOK3S_INTERRUPT_FP_UNAVAIL 0x800
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 36fdb3a..d5a8a38 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -34,6 +34,7 @@
(\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
(\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
(\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+ (\intno == BOOK3S_INTERRUPT_EXTERNAL_HV) || \
(\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
(\intno == BOOK3S_INTERRUPT_PROGRAM) || \
(\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index a077adc..e0298d2 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -210,6 +210,8 @@
#define DISPATCH_LOG_BYTES 4096 /* bytes per cpu */
#define N_DISPATCH_LOG (DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
+extern struct kmem_cache *dtl_cache;
+
/*
* When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls
* reading from the dispatch trace log. If other code wants to consume
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index e4f0191..47cacddb 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -29,21 +29,6 @@
struct pci_controller;
struct kimage;
-#ifdef CONFIG_SMP
-struct smp_ops_t {
- void (*message_pass)(int target, int msg);
- int (*probe)(void);
- void (*kick_cpu)(int nr);
- void (*setup_cpu)(int nr);
- void (*bringup_done)(void);
- void (*take_timebase)(void);
- void (*give_timebase)(void);
- int (*cpu_disable)(void);
- void (*cpu_die)(unsigned int nr);
- int (*cpu_bootable)(unsigned int nr);
-};
-#endif
-
struct machdep_calls {
char *name;
#ifdef CONFIG_PPC64
@@ -267,6 +252,7 @@
extern void e500_idle(void);
extern void power4_idle(void);
+extern void power7_idle(void);
extern void ppc6xx_idle(void);
extern void book3e_idle(void);
@@ -311,12 +297,6 @@
#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_SMP
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
/* Functions to produce codes on the leds.
* The SRC code should be unique for the message category and should
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 17194fc..3ea0f9a 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -43,6 +43,7 @@
#define MAS0_TLBSEL(x) (((x) << 28) & 0x30000000)
#define MAS0_ESEL(x) (((x) << 16) & 0x0FFF0000)
#define MAS0_NV(x) ((x) & 0x00000FFF)
+#define MAS0_ESEL_MASK 0x0FFF0000
#define MAS0_HES 0x00004000
#define MAS0_WQ_ALLWAYS 0x00000000
#define MAS0_WQ_COND 0x00001000
@@ -137,6 +138,21 @@
#define MMUCSR0_TLB2PS 0x00078000 /* TLB2 Page Size */
#define MMUCSR0_TLB3PS 0x00780000 /* TLB3 Page Size */
+/* MMUCFG bits */
+#define MMUCFG_MAVN_NASK 0x00000003
+#define MMUCFG_MAVN_V1_0 0x00000000
+#define MMUCFG_MAVN_V2_0 0x00000001
+#define MMUCFG_NTLB_MASK 0x0000000c
+#define MMUCFG_NTLB_SHIFT 2
+#define MMUCFG_PIDSIZE_MASK 0x000007c0
+#define MMUCFG_PIDSIZE_SHIFT 6
+#define MMUCFG_TWC 0x00008000
+#define MMUCFG_LRAT 0x00010000
+#define MMUCFG_RASIZE_MASK 0x00fe0000
+#define MMUCFG_RASIZE_SHIFT 17
+#define MMUCFG_LPIDSIZE_MASK 0x0f000000
+#define MMUCFG_LPIDSIZE_SHIFT 24
+
/* TLBnCFG encoding */
#define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */
#define TLBnCFG_HES 0x00002000 /* HW select supported */
@@ -229,6 +245,10 @@
extern int mmu_linear_psize;
extern int mmu_vmemmap_psize;
+#ifdef CONFIG_PPC64
+extern unsigned long linear_map_top;
+#endif
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index ae7b3ef..d865bd9 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -408,6 +408,7 @@
#endif /* CONFIG_PPC_SUBPAGE_PROT */
typedef unsigned long mm_context_id_t;
+struct spinlock;
typedef struct {
mm_context_id_t id;
@@ -423,6 +424,11 @@
#ifdef CONFIG_PPC_SUBPAGE_PROT
struct subpage_prot_table spt;
#endif /* CONFIG_PPC_SUBPAGE_PROT */
+#ifdef CONFIG_PPC_ICSWX
+ struct spinlock *cop_lockp; /* guard acop and cop_pid */
+ unsigned long acop; /* mask of enabled coprocessor types */
+ unsigned int cop_pid; /* pid value used with coprocessors */
+#endif /* CONFIG_PPC_ICSWX */
} mm_context_t;
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index bb40a06..4138b21 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -56,11 +56,6 @@
*/
#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000)
-/* This indicates that the processor uses the ISA 2.06 server tlbie
- * mnemonics
- */
-#define MMU_FTR_TLBIE_206 ASM_CONST(0x00400000)
-
/* Enable use of TLB reservation. Processor should support tlbsrx.
* instruction and MAS0[WQ].
*/
@@ -70,6 +65,53 @@
*/
#define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000)
+/* MMU is SLB-based
+ */
+#define MMU_FTR_SLB ASM_CONST(0x02000000)
+
+/* Support 16M large pages
+ */
+#define MMU_FTR_16M_PAGE ASM_CONST(0x04000000)
+
+/* Supports TLBIEL variant
+ */
+#define MMU_FTR_TLBIEL ASM_CONST(0x08000000)
+
+/* Supports tlbies w/o locking
+ */
+#define MMU_FTR_LOCKLESS_TLBIE ASM_CONST(0x10000000)
+
+/* Large pages can be marked CI
+ */
+#define MMU_FTR_CI_LARGE_PAGE ASM_CONST(0x20000000)
+
+/* 1T segments available
+ */
+#define MMU_FTR_1T_SEGMENT ASM_CONST(0x40000000)
+
+/* Doesn't support the B bit (1T segment) in SLBIE
+ */
+#define MMU_FTR_NO_SLBIE_B ASM_CONST(0x80000000)
+
+/* MMU feature bit sets for various CPUs */
+#define MMU_FTRS_DEFAULT_HPTE_ARCH_V2 \
+ MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2
+#define MMU_FTRS_POWER4 MMU_FTRS_DEFAULT_HPTE_ARCH_V2
+#define MMU_FTRS_PPC970 MMU_FTRS_POWER4
+#define MMU_FTRS_POWER5 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER6 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER7 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_CELL MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+ MMU_FTR_CI_LARGE_PAGE
+#define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+ MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B
+#define MMU_FTRS_A2 MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \
+ MMU_FTR_USE_TLBIVAX_BCAST | \
+ MMU_FTR_LOCK_BCAST_INVAL | \
+ MMU_FTR_USE_TLBRSRV | \
+ MMU_FTR_USE_PAIRED_MAS | \
+ MMU_FTR_TLBIEL | \
+ MMU_FTR_16M_PAGE
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 81fb412..a73668a 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -32,6 +32,10 @@
extern void mmu_context_init(void);
#endif
+extern void switch_cop(struct mm_struct *next);
+extern int use_cop(unsigned long acop, struct mm_struct *mm);
+extern void drop_cop(unsigned long acop, struct mm_struct *mm);
+
/*
* switch_mm is the entry point called from the architecture independent
* code in kernel/sched.c
@@ -55,6 +59,12 @@
if (prev == next)
return;
+#ifdef CONFIG_PPC_ICSWX
+ /* Switch coprocessor context only if prev or next uses a coprocessor */
+ if (prev->context.acop || next->context.acop)
+ switch_cop(next);
+#endif /* CONFIG_PPC_ICSWX */
+
/* We must stop all altivec streams before changing the HW
* context
*/
@@ -67,7 +77,7 @@
* sub architectures.
*/
#ifdef CONFIG_PPC_STD_MMU_64
- if (cpu_has_feature(CPU_FTR_SLB))
+ if (mmu_has_feature(MMU_FTR_SLB))
switch_slb(tsk, next);
else
switch_stab(tsk, next);
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index 7005ee0..df18989 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -3,7 +3,6 @@
#ifdef __KERNEL__
#include <linux/irq.h>
-#include <linux/sysdev.h>
#include <asm/dcr.h>
#include <asm/msi_bitmap.h>
@@ -263,6 +262,7 @@
#ifdef CONFIG_SMP
struct irq_chip hc_ipi;
#endif
+ struct irq_chip hc_tm;
const char *name;
/* Flags */
unsigned int flags;
@@ -281,7 +281,7 @@
/* vector numbers used for internal sources (ipi/timers) */
unsigned int ipi_vecs[4];
- unsigned int timer_vecs[4];
+ unsigned int timer_vecs[8];
/* Spurious vector to program into unused sources */
unsigned int spurious_vec;
@@ -320,8 +320,6 @@
/* link */
struct mpic *next;
- struct sys_device sysdev;
-
#ifdef CONFIG_PM
struct mpic_irq_save *save_data;
#endif
@@ -371,6 +369,8 @@
* NOTE: This flag trumps MPIC_WANTS_RESET.
*/
#define MPIC_NO_RESET 0x00004000
+/* Freescale MPIC (compatible includes "fsl,mpic") */
+#define MPIC_FSL 0x00008000
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
index d4b4bfa..89d2f99 100644
--- a/arch/powerpc/include/asm/pSeries_reconfig.h
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
@@ -18,13 +18,18 @@
extern int pSeries_reconfig_notifier_register(struct notifier_block *);
extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
extern struct blocking_notifier_head pSeries_reconfig_chain;
+/* Not the best place to put this, will be fixed when we move some
+ * of the rtas suspend-me stuff to pseries */
+extern void pSeries_coalesce_init(void);
#else /* !CONFIG_PPC_PSERIES */
static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
return 0;
}
static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+static inline void pSeries_coalesce_init(void) { }
#endif /* CONFIG_PPC_PSERIES */
+
#endif /* __KERNEL__ */
#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index ec57540..7412676 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -92,9 +92,9 @@
* Now, starting in cacheline 2, the exception save areas
*/
/* used for most interrupts/exceptions */
- u64 exgen[10] __attribute__((aligned(0x80)));
- u64 exmc[10]; /* used for machine checks */
- u64 exslb[10]; /* used for SLB/segment table misses
+ u64 exgen[11] __attribute__((aligned(0x80)));
+ u64 exmc[11]; /* used for machine checks */
+ u64 exslb[11]; /* used for SLB/segment table misses
* on the linear mapping */
/* SLB related definitions */
u16 vmalloc_sllp;
@@ -106,7 +106,8 @@
pgd_t *pgd; /* Current PGD */
pgd_t *kernel_pgd; /* Kernel PGD */
u64 exgen[8] __attribute__((aligned(0x80)));
- u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+ /* We can have up to 3 levels of reentrancy in the TLB miss handler */
+ u64 extlb[3][EX_TLB_SIZE / sizeof(u64)] __attribute__((aligned(0x80)));
u64 exmc[8]; /* used for machine checks */
u64 excrit[8]; /* used for crit interrupts */
u64 exdbg[8]; /* used for debug interrupts */
@@ -125,7 +126,7 @@
struct task_struct *__current; /* Pointer to current */
u64 kstack; /* Saved Kernel stack addr */
u64 stab_rr; /* stab/slb round-robin counter */
- u64 saved_r1; /* r1 save for RTAS calls */
+ u64 saved_r1; /* r1 save for RTAS calls or PM */
u64 saved_msr; /* MSR saved here by enter_rtas */
u16 trap_save; /* Used when bad stack is encountered */
u8 soft_enabled; /* irq soft-enable flag */
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 812b2cd..9356262 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -59,24 +59,7 @@
: "ctr", "memory");
}
-extern void copy_4K_page(void *to, void *from);
-
-#ifdef CONFIG_PPC_64K_PAGES
-static inline void copy_page(void *to, void *from)
-{
- unsigned int i;
- for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
- copy_4K_page(to, from);
- to += 4096;
- from += 4096;
- }
-}
-#else /* CONFIG_PPC_64K_PAGES */
-static inline void copy_page(void *to, void *from)
-{
- copy_4K_page(to, from);
-}
-#endif /* CONFIG_PPC_64K_PAGES */
+extern void copy_page(void *to, void *from);
/* Log 2 of page table size */
extern u64 ppc64_pft_size;
@@ -130,7 +113,7 @@
extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
unsigned long len, unsigned int psize);
-#define slice_mm_new_context(mm) ((mm)->context.id == 0)
+#define slice_mm_new_context(mm) ((mm)->context.id == MMU_NO_CONTEXT)
#endif /* __ASSEMBLY__ */
#else
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 2b09cd5..81576ee 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -257,21 +257,20 @@
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
- unsigned long old;
- if ((pte_val(*ptep) & _PAGE_RW) == 0)
- return;
- old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+ if ((pte_val(*ptep) & _PAGE_RW) == 0)
+ return;
+
+ pte_update(mm, addr, ptep, _PAGE_RW, 0);
}
static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
- unsigned long old;
-
if ((pte_val(*ptep) & _PAGE_RW) == 0)
return;
- old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+
+ pte_update(mm, addr, ptep, _PAGE_RW, 1);
}
/*
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 1255569..e472659 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -41,6 +41,10 @@
#define PPC_INST_RFCI 0x4c000066
#define PPC_INST_RFDI 0x4c00004e
#define PPC_INST_RFMCI 0x4c00004c
+#define PPC_INST_MFSPR_DSCR 0x7c1102a6
+#define PPC_INST_MFSPR_DSCR_MASK 0xfc1fffff
+#define PPC_INST_MTSPR_DSCR 0x7c1103a6
+#define PPC_INST_MTSPR_DSCR_MASK 0xfc1fffff
#define PPC_INST_STRING 0x7c00042a
#define PPC_INST_STRING_MASK 0xfc0007fe
@@ -56,6 +60,17 @@
#define PPC_INST_TLBSRX_DOT 0x7c0006a5
#define PPC_INST_XXLOR 0xf0000510
+#define PPC_INST_NAP 0x4c000364
+#define PPC_INST_SLEEP 0x4c0003a4
+
+/* A2 specific instructions */
+#define PPC_INST_ERATWE 0x7c0001a6
+#define PPC_INST_ERATRE 0x7c000166
+#define PPC_INST_ERATILX 0x7c000066
+#define PPC_INST_ERATIVAX 0x7c000666
+#define PPC_INST_ERATSX 0x7c000126
+#define PPC_INST_ERATSX_DOT 0x7c000127
+
/* macros to insert fields into opcodes */
#define __PPC_RA(a) (((a) & 0x1f) << 16)
#define __PPC_RB(b) (((b) & 0x1f) << 11)
@@ -67,6 +82,8 @@
#define __PPC_XT(s) __PPC_XS(s)
#define __PPC_T_TLB(t) (((t) & 0x3) << 21)
#define __PPC_WC(w) (((w) & 0x3) << 21)
+#define __PPC_WS(w) (((w) & 0x1f) << 11)
+
/*
* Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
* larx with EH set as an illegal instruction.
@@ -113,6 +130,21 @@
#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \
__PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATWE(s, a, w) stringify_in_c(.long PPC_INST_ERATWE | \
+ __PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
+#define PPC_ERATRE(s, a, w) stringify_in_c(.long PPC_INST_ERATRE | \
+ __PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
+#define PPC_ERATILX(t, a, b) stringify_in_c(.long PPC_INST_ERATILX | \
+ __PPC_T_TLB(t) | __PPC_RA(a) | \
+ __PPC_RB(b))
+#define PPC_ERATIVAX(s, a, b) stringify_in_c(.long PPC_INST_ERATIVAX | \
+ __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATSX(t, a, w) stringify_in_c(.long PPC_INST_ERATSX | \
+ __PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATSX_DOT(t, a, w) stringify_in_c(.long PPC_INST_ERATSX_DOT | \
+ __PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+
+
/*
* Define what the VSX XX1 form instructions will look like, then add
* the 128 bit load store instructions based on that.
@@ -126,4 +158,7 @@
#define XXLOR(t, a, b) stringify_in_c(.long PPC_INST_XXLOR | \
VSX_XX3((t), (a), (b)))
+#define PPC_NAP stringify_in_c(.long PPC_INST_NAP)
+#define PPC_SLEEP stringify_in_c(.long PPC_INST_SLEEP)
+
#endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 9821006..1b42238 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -170,6 +170,7 @@
#define HMT_MEDIUM or 2,2,2
#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority
#define HMT_HIGH or 3,3,3
+#define HMT_EXTRA_HIGH or 7,7,7 # power7 only
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index de1967a..d50c2b6 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -238,6 +238,10 @@
#ifdef CONFIG_KVM_BOOK3S_32_HANDLER
void* kvm_shadow_vcpu; /* KVM internal data */
#endif /* CONFIG_KVM_BOOK3S_32_HANDLER */
+#ifdef CONFIG_PPC64
+ unsigned long dscr;
+ int dscr_inherit;
+#endif
};
#define ARCH_MIN_TASKALIGN 16
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 7e4abeb..c5cae0d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -99,17 +99,23 @@
#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */
#if defined(CONFIG_PPC_BOOK3S_64)
+#define MSR_64BIT MSR_SF
+
/* Server variant */
#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL MSR_ | MSR_SF
+#define MSR_KERNEL MSR_ | MSR_64BIT
#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64 MSR_USER32 | MSR_SF
+#define MSR_USER64 MSR_USER32 | MSR_64BIT
#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
/* Default MSR for kernel mode. */
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif
+#ifndef MSR_64BIT
+#define MSR_64BIT 0
+#endif
+
/* Floating Point Status and Control Register (FPSCR) Fields */
#define FPSCR_FX 0x80000000 /* FPU exception summary */
#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
@@ -182,6 +188,8 @@
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DSCR 0x11
+#define SPRN_CFAR 0x1c /* Come From Address Register */
+#define SPRN_ACOP 0x1F /* Available Coprocessor Register */
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_CT 0xc0000000 /* current thread */
@@ -210,8 +218,43 @@
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
#define SPRN_SPURR 0x134 /* Scaled PURR */
+#define SPRN_HSPRG0 0x130 /* Hypervisor Scratch 0 */
+#define SPRN_HSPRG1 0x131 /* Hypervisor Scratch 1 */
+#define SPRN_HDSISR 0x132
+#define SPRN_HDAR 0x133
+#define SPRN_HDEC 0x136 /* Hypervisor Decrementer */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
+#define SPRN_RMOR 0x138 /* Real mode offset register */
+#define SPRN_HRMOR 0x139 /* Real mode offset register */
+#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
+#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
+#define LPCR_VPM0 (1ul << (63-0))
+#define LPCR_VPM1 (1ul << (63-1))
+#define LPCR_ISL (1ul << (63-2))
+#define LPCR_DPFD_SH (63-11)
+#define LPCR_VRMA_L (1ul << (63-12))
+#define LPCR_VRMA_LP0 (1ul << (63-15))
+#define LPCR_VRMA_LP1 (1ul << (63-16))
+#define LPCR_RMLS 0x1C000000 /* impl dependent rmo limit sel */
+#define LPCR_ILE 0x02000000 /* !HV irqs set MSR:LE */
+#define LPCR_PECE 0x00007000 /* powersave exit cause enable */
+#define LPCR_PECE0 0x00004000 /* ext. exceptions can cause exit */
+#define LPCR_PECE1 0x00002000 /* decrementer can cause exit */
+#define LPCR_PECE2 0x00001000 /* machine check etc can cause exit */
+#define LPCR_MER 0x00000800 /* Mediated External Exception */
+#define LPCR_LPES0 0x00000008 /* LPAR Env selector 0 */
+#define LPCR_LPES1 0x00000004 /* LPAR Env selector 1 */
+#define LPCR_RMI 0x00000002 /* real mode is cache inhibit */
+#define LPCR_HDICE 0x00000001 /* Hyp Decr enable (HV,PR,EE) */
+#define SPRN_LPID 0x13F /* Logical Partition Identifier */
+#define SPRN_HMER 0x150 /* Hardware m? error recovery */
+#define SPRN_HMEER 0x151 /* Hardware m? enable error recovery */
+#define SPRN_HEIR 0x153 /* Hypervisor Emulated Instruction Register */
+#define SPRN_TLBINDEXR 0x154 /* P7 TLB control register */
+#define SPRN_TLBVPNR 0x155 /* P7 TLB control register */
+#define SPRN_TLBRPNR 0x156 /* P7 TLB control register */
+#define SPRN_TLBLPIDR 0x157 /* P7 TLB control register */
#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
@@ -434,16 +477,23 @@
#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
-#define SRR1_WAKERESET 0x00380000 /* System reset */
#define SRR1_WAKESYSERR 0x00300000 /* System error */
#define SRR1_WAKEEE 0x00200000 /* External interrupt */
#define SRR1_WAKEMT 0x00280000 /* mtctrl */
+#define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */
#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
+#define SRR1_WAKERESET 0x00100000 /* System reset */
+#define SRR1_WAKESTATE 0x00030000 /* Powersave exit mask [46:47] */
+#define SRR1_WS_DEEPEST 0x00030000 /* Some resources not maintained,
+ * may not be recoverable */
+#define SRR1_WS_DEEPER 0x00020000 /* Some resources not maintained */
+#define SRR1_WS_DEEP 0x00010000 /* All resources maintained */
#define SRR1_PROGFPE 0x00100000 /* Floating Point Enabled */
#define SRR1_PROGPRIV 0x00040000 /* Privileged instruction */
#define SRR1_PROGTRAP 0x00020000 /* Trap */
#define SRR1_PROGADDR 0x00010000 /* SRR0 contains subsequent addr */
+
#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */
#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */
@@ -673,12 +723,15 @@
* SPRG usage:
*
* All 64-bit:
- * - SPRG1 stores PACA pointer
+ * - SPRG1 stores PACA pointer except 64-bit server in
+ * HV mode in which case it is HSPRG0
*
* 64-bit server:
* - SPRG0 unused (reserved for HV on Power4)
* - SPRG2 scratch for exception vectors
* - SPRG3 unused (user visible)
+ * - HSPRG0 stores PACA in HV mode
+ * - HSPRG1 scratch for "HV" exceptions
*
* 64-bit embedded
* - SPRG0 generic exception scratch
@@ -741,6 +794,41 @@
#ifdef CONFIG_PPC_BOOK3S_64
#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2
+#define SPRN_SPRG_HPACA SPRN_HSPRG0
+#define SPRN_SPRG_HSCRATCH0 SPRN_HSPRG1
+
+#define GET_PACA(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mfspr rX,SPRN_SPRG_PACA; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mfspr rX,SPRN_SPRG_HPACA; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define SET_PACA(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mtspr SPRN_SPRG_PACA,rX; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mtspr SPRN_SPRG_HPACA,rX; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define GET_SCRATCH0(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mfspr rX,SPRN_SPRG_SCRATCH0; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mfspr rX,SPRN_SPRG_HSCRATCH0; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define SET_SCRATCH0(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mtspr SPRN_SPRG_SCRATCH0,rX; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mtspr SPRN_SPRG_HSCRATCH0,rX; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#else /* CONFIG_PPC_BOOK3S_64 */
+#define GET_SCRATCH0(rX) mfspr rX,SPRN_SPRG_SCRATCH0
+#define SET_SCRATCH0(rX) mtspr SPRN_SPRG_SCRATCH0,rX
+
#endif
#ifdef CONFIG_PPC_BOOK3E_64
@@ -750,6 +838,10 @@
#define SPRN_SPRG_TLB_EXFRAME SPRN_SPRG2
#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6
#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0
+
+#define SET_PACA(rX) mtspr SPRN_SPRG_PACA,rX
+#define GET_PACA(rX) mfspr rX,SPRN_SPRG_PACA
+
#endif
#ifdef CONFIG_PPC_BOOK3S_32
@@ -800,6 +892,8 @@
#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
#endif
+
+
/*
* An mtfsf instruction with the L bit set. On CPUs that support this a
* full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
@@ -894,6 +988,8 @@
#define PV_POWER5p 0x003B
#define PV_POWER7 0x003F
#define PV_970FX 0x003C
+#define PV_POWER6 0x003E
+#define PV_POWER7 0x003F
#define PV_630 0x0040
#define PV_630p 0x0041
#define PV_970MP 0x0044
diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h
new file mode 100644
index 0000000..3d52a11
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_a2.h
@@ -0,0 +1,165 @@
+/*
+ * Register definitions specific to the A2 core
+ *
+ * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_REG_A2_H__
+#define __ASM_POWERPC_REG_A2_H__
+
+#define SPRN_TENSR 0x1b5
+#define SPRN_TENS 0x1b6 /* Thread ENable Set */
+#define SPRN_TENC 0x1b7 /* Thread ENable Clear */
+
+#define SPRN_A2_CCR0 0x3f0 /* Core Configuration Register 0 */
+#define SPRN_A2_CCR1 0x3f1 /* Core Configuration Register 1 */
+#define SPRN_A2_CCR2 0x3f2 /* Core Configuration Register 2 */
+#define SPRN_MMUCR0 0x3fc /* MMU Control Register 0 */
+#define SPRN_MMUCR1 0x3fd /* MMU Control Register 1 */
+#define SPRN_MMUCR2 0x3fe /* MMU Control Register 2 */
+#define SPRN_MMUCR3 0x3ff /* MMU Control Register 3 */
+
+#define SPRN_IAR 0x372
+
+#define SPRN_IUCR0 0x3f3
+#define IUCR0_ICBI_ACK 0x1000
+
+#define SPRN_XUCR0 0x3f6 /* Execution Unit Config Register 0 */
+
+#define A2_IERAT_SIZE 16
+#define A2_DERAT_SIZE 32
+
+/* A2 MMUCR0 bits */
+#define MMUCR0_ECL 0x80000000 /* Extended Class for TLB fills */
+#define MMUCR0_TID_NZ 0x40000000 /* TID is non-zero */
+#define MMUCR0_TS 0x10000000 /* Translation space for TLB fills */
+#define MMUCR0_TGS 0x20000000 /* Guest space for TLB fills */
+#define MMUCR0_TLBSEL 0x0c000000 /* TLB or ERAT target for TLB fills */
+#define MMUCR0_TLBSEL_U 0x00000000 /* TLBSEL = UTLB */
+#define MMUCR0_TLBSEL_I 0x08000000 /* TLBSEL = I-ERAT */
+#define MMUCR0_TLBSEL_D 0x0c000000 /* TLBSEL = D-ERAT */
+#define MMUCR0_LOCKSRSH 0x02000000 /* Use TLB lock on tlbsx. */
+#define MMUCR0_TID_MASK 0x000000ff /* TID field */
+
+/* A2 MMUCR1 bits */
+#define MMUCR1_IRRE 0x80000000 /* I-ERAT round robin enable */
+#define MMUCR1_DRRE 0x40000000 /* D-ERAT round robin enable */
+#define MMUCR1_REE 0x20000000 /* Reference Exception Enable*/
+#define MMUCR1_CEE 0x10000000 /* Change exception enable */
+#define MMUCR1_CSINV_ALL 0x00000000 /* Inval ERAT on all CS evts */
+#define MMUCR1_CSINV_NISYNC 0x04000000 /* Inval ERAT on all ex isync*/
+#define MMUCR1_CSINV_NEVER 0x0c000000 /* Don't inval ERAT on CS */
+#define MMUCR1_ICTID 0x00080000 /* IERAT class field as TID */
+#define MMUCR1_ITTID 0x00040000 /* IERAT thdid field as TID */
+#define MMUCR1_DCTID 0x00020000 /* DERAT class field as TID */
+#define MMUCR1_DTTID 0x00010000 /* DERAT thdid field as TID */
+#define MMUCR1_DCCD 0x00008000 /* DERAT class ignore */
+#define MMUCR1_TLBWE_BINV 0x00004000 /* back invalidate on tlbwe */
+
+/* A2 MMUCR2 bits */
+#define MMUCR2_PSSEL_SHIFT 4
+
+/* A2 MMUCR3 bits */
+#define MMUCR3_THID 0x0000000f /* Thread ID */
+
+/* *** ERAT TLB bits definitions */
+#define TLB0_EPN_MASK ASM_CONST(0xfffffffffffff000)
+#define TLB0_CLASS_MASK ASM_CONST(0x0000000000000c00)
+#define TLB0_CLASS_00 ASM_CONST(0x0000000000000000)
+#define TLB0_CLASS_01 ASM_CONST(0x0000000000000400)
+#define TLB0_CLASS_10 ASM_CONST(0x0000000000000800)
+#define TLB0_CLASS_11 ASM_CONST(0x0000000000000c00)
+#define TLB0_V ASM_CONST(0x0000000000000200)
+#define TLB0_X ASM_CONST(0x0000000000000100)
+#define TLB0_SIZE_MASK ASM_CONST(0x00000000000000f0)
+#define TLB0_SIZE_4K ASM_CONST(0x0000000000000010)
+#define TLB0_SIZE_64K ASM_CONST(0x0000000000000030)
+#define TLB0_SIZE_1M ASM_CONST(0x0000000000000050)
+#define TLB0_SIZE_16M ASM_CONST(0x0000000000000070)
+#define TLB0_SIZE_1G ASM_CONST(0x00000000000000a0)
+#define TLB0_THDID_MASK ASM_CONST(0x000000000000000f)
+#define TLB0_THDID_0 ASM_CONST(0x0000000000000001)
+#define TLB0_THDID_1 ASM_CONST(0x0000000000000002)
+#define TLB0_THDID_2 ASM_CONST(0x0000000000000004)
+#define TLB0_THDID_3 ASM_CONST(0x0000000000000008)
+#define TLB0_THDID_ALL ASM_CONST(0x000000000000000f)
+
+#define TLB1_RESVATTR ASM_CONST(0x00f0000000000000)
+#define TLB1_U0 ASM_CONST(0x0008000000000000)
+#define TLB1_U1 ASM_CONST(0x0004000000000000)
+#define TLB1_U2 ASM_CONST(0x0002000000000000)
+#define TLB1_U3 ASM_CONST(0x0001000000000000)
+#define TLB1_R ASM_CONST(0x0000800000000000)
+#define TLB1_C ASM_CONST(0x0000400000000000)
+#define TLB1_RPN_MASK ASM_CONST(0x000003fffffff000)
+#define TLB1_W ASM_CONST(0x0000000000000800)
+#define TLB1_I ASM_CONST(0x0000000000000400)
+#define TLB1_M ASM_CONST(0x0000000000000200)
+#define TLB1_G ASM_CONST(0x0000000000000100)
+#define TLB1_E ASM_CONST(0x0000000000000080)
+#define TLB1_VF ASM_CONST(0x0000000000000040)
+#define TLB1_UX ASM_CONST(0x0000000000000020)
+#define TLB1_SX ASM_CONST(0x0000000000000010)
+#define TLB1_UW ASM_CONST(0x0000000000000008)
+#define TLB1_SW ASM_CONST(0x0000000000000004)
+#define TLB1_UR ASM_CONST(0x0000000000000002)
+#define TLB1_SR ASM_CONST(0x0000000000000001)
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+#define WSP_UART_PHYS 0xffc000c000
+/* This needs to be careful chosen to hit a !0 congruence class
+ * in the TLB since we bolt it in way 3, which is already occupied
+ * by our linear mapping primary bolted entry in CC 0.
+ */
+#define WSP_UART_VIRT 0xf000000000001000
+#endif
+
+/* A2 erativax attributes definitions */
+#define ERATIVAX_RS_IS_ALL 0x000
+#define ERATIVAX_RS_IS_TID 0x040
+#define ERATIVAX_RS_IS_CLASS 0x080
+#define ERATIVAX_RS_IS_FULLMATCH 0x0c0
+#define ERATIVAX_CLASS_00 0x000
+#define ERATIVAX_CLASS_01 0x010
+#define ERATIVAX_CLASS_10 0x020
+#define ERATIVAX_CLASS_11 0x030
+#define ERATIVAX_PSIZE_4K (TLB_PSIZE_4K >> 1)
+#define ERATIVAX_PSIZE_64K (TLB_PSIZE_64K >> 1)
+#define ERATIVAX_PSIZE_1M (TLB_PSIZE_1M >> 1)
+#define ERATIVAX_PSIZE_16M (TLB_PSIZE_16M >> 1)
+#define ERATIVAX_PSIZE_1G (TLB_PSIZE_1G >> 1)
+
+/* A2 eratilx attributes definitions */
+#define ERATILX_T_ALL 0
+#define ERATILX_T_TID 1
+#define ERATILX_T_TGS 2
+#define ERATILX_T_FULLMATCH 3
+#define ERATILX_T_CLASS0 4
+#define ERATILX_T_CLASS1 5
+#define ERATILX_T_CLASS2 6
+#define ERATILX_T_CLASS3 7
+
+/* XUCR0 bits */
+#define XUCR0_TRACE_UM_T0 0x40000000 /* Thread 0 */
+#define XUCR0_TRACE_UM_T1 0x20000000 /* Thread 1 */
+#define XUCR0_TRACE_UM_T2 0x10000000 /* Thread 2 */
+#define XUCR0_TRACE_UM_T3 0x08000000 /* Thread 3 */
+
+/* A2 CCR0 register */
+#define A2_CCR0_PME_DISABLED 0x00000000
+#define A2_CCR0_PME_SLEEP 0x40000000
+#define A2_CCR0_PME_RVW 0x80000000
+#define A2_CCR0_PME_DISABLED2 0xc0000000
+
+/* A2 CCR2 register */
+#define A2_CCR2_ERAT_ONLY_MODE 0x00000001
+#define A2_CCR2_ENABLE_ICSWX 0x00000002
+#define A2_CCR2_ENABLE_PC 0x20000000
+#define A2_CCR2_ENABLE_TRACE 0x40000000
+
+#endif /* __ASM_POWERPC_REG_A2_H__ */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index b316794..0f0ad9f 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -27,10 +27,12 @@
#define MSR_CM (1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
#if defined(CONFIG_PPC_BOOK3E_64)
+#define MSR_64BIT MSR_CM
+
#define MSR_ MSR_ME | MSR_CE
-#define MSR_KERNEL MSR_ | MSR_CM
+#define MSR_KERNEL MSR_ | MSR_64BIT
#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE
-#define MSR_USER64 MSR_USER32 | MSR_CM | MSR_DE
+#define MSR_USER64 MSR_USER32 | MSR_64BIT
#elif defined (CONFIG_40x)
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
@@ -81,6 +83,10 @@
#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */
#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */
#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */
+#define SPRN_IVOR38 0x1B0 /* Interrupt Vector Offset Register 38 */
+#define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */
+#define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */
+#define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */
#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 9a1193e..58625d1 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -158,7 +158,50 @@
unsigned long target:4; /* Target of failed operation */
unsigned long type:8; /* General event or error*/
unsigned long extended_log_length:32; /* length in bytes */
- unsigned char buffer[1];
+ unsigned char buffer[1]; /* Start of extended log */
+ /* Variable length. */
+};
+
+#define RTAS_V6EXT_LOG_FORMAT_EVENT_LOG 14
+
+#define RTAS_V6EXT_COMPANY_ID_IBM (('I' << 24) | ('B' << 16) | ('M' << 8))
+
+/* RTAS general extended event log, Version 6. The extended log starts
+ * from "buffer" field of struct rtas_error_log defined above.
+ */
+struct rtas_ext_event_log_v6 {
+ /* Byte 0 */
+ uint32_t log_valid:1; /* 1:Log valid */
+ uint32_t unrecoverable_error:1; /* 1:Unrecoverable error */
+ uint32_t recoverable_error:1; /* 1:recoverable (correctable */
+ /* or successfully retried) */
+ uint32_t degraded_operation:1; /* 1:Unrecoverable err, bypassed*/
+ /* - degraded operation (e.g. */
+ /* CPU or mem taken off-line) */
+ uint32_t predictive_error:1;
+ uint32_t new_log:1; /* 1:"New" log (Always 1 for */
+ /* data returned from RTAS */
+ uint32_t big_endian:1; /* 1: Big endian */
+ uint32_t :1; /* reserved */
+ /* Byte 1 */
+ uint32_t :8; /* reserved */
+ /* Byte 2 */
+ uint32_t powerpc_format:1; /* Set to 1 (indicating log is */
+ /* in PowerPC format */
+ uint32_t :3; /* reserved */
+ uint32_t log_format:4; /* Log format indicator. Define */
+ /* format used for byte 12-2047 */
+ /* Byte 3 */
+ uint32_t :8; /* reserved */
+ /* Byte 4-11 */
+ uint8_t reserved[8]; /* reserved */
+ /* Byte 12-15 */
+ uint32_t company_id; /* Company ID of the company */
+ /* that defines the format for */
+ /* the vendor specific log type */
+ /* Byte 16-end of log */
+ uint8_t vendor_log[1]; /* Start of vendor specific log */
+ /* Variable length. */
};
/*
diff --git a/arch/powerpc/include/asm/scom.h b/arch/powerpc/include/asm/scom.h
new file mode 100644
index 0000000..0cabfd7
--- /dev/null
+++ b/arch/powerpc/include/asm/scom.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ * and David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_SCOM_H
+#define _ASM_POWERPC_SCOM_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_SCOM
+
+/*
+ * The SCOM bus is a sideband bus used for accessing various internal
+ * registers of the processor or the chipset. The implementation details
+ * differ between processors and platforms, and the access method as
+ * well.
+ *
+ * This API allows to "map" ranges of SCOM register numbers associated
+ * with a given SCOM controller. The later must be represented by a
+ * device node, though some implementations might support NULL if there
+ * is no possible ambiguity
+ *
+ * Then, scom_read/scom_write can be used to accesses registers inside
+ * that range. The argument passed is a register number relative to
+ * the beginning of the range mapped.
+ */
+
+typedef void *scom_map_t;
+
+/* Value for an invalid SCOM map */
+#define SCOM_MAP_INVALID (NULL)
+
+/* The scom_controller data structure is what the platform passes
+ * to the core code in scom_init, it provides the actual implementation
+ * of all the SCOM functions
+ */
+struct scom_controller {
+ scom_map_t (*map)(struct device_node *ctrl_dev, u64 reg, u64 count);
+ void (*unmap)(scom_map_t map);
+
+ u64 (*read)(scom_map_t map, u32 reg);
+ void (*write)(scom_map_t map, u32 reg, u64 value);
+};
+
+extern const struct scom_controller *scom_controller;
+
+/**
+ * scom_init - Initialize the SCOM backend, called by the platform
+ * @controller: The platform SCOM controller
+ */
+static inline void scom_init(const struct scom_controller *controller)
+{
+ scom_controller = controller;
+}
+
+/**
+ * scom_map_ok - Test is a SCOM mapping is successful
+ * @map: The result of scom_map to test
+ */
+static inline int scom_map_ok(scom_map_t map)
+{
+ return map != SCOM_MAP_INVALID;
+}
+
+/**
+ * scom_map - Map a block of SCOM registers
+ * @ctrl_dev: Device node of the SCOM controller
+ * some implementations allow NULL here
+ * @reg: first SCOM register to map
+ * @count: Number of SCOM registers to map
+ */
+
+static inline scom_map_t scom_map(struct device_node *ctrl_dev,
+ u64 reg, u64 count)
+{
+ return scom_controller->map(ctrl_dev, reg, count);
+}
+
+/**
+ * scom_find_parent - Find the SCOM controller for a device
+ * @dev: OF node of the device
+ *
+ * This is not meant for general usage, but in combination with
+ * scom_map() allows to map registers not represented by the
+ * device own scom-reg property. Useful for applying HW workarounds
+ * on things not properly represented in the device-tree for example.
+ */
+struct device_node *scom_find_parent(struct device_node *dev);
+
+
+/**
+ * scom_map_device - Map a device's block of SCOM registers
+ * @dev: OF node of the device
+ * @index: Register bank index (index in "scom-reg" property)
+ *
+ * This function will use the device-tree binding for SCOM which
+ * is to follow "scom-parent" properties until it finds a node with
+ * a "scom-controller" property to find the controller. It will then
+ * use the "scom-reg" property which is made of reg/count pairs,
+ * each of them having a size defined by the controller's #scom-cells
+ * property
+ */
+extern scom_map_t scom_map_device(struct device_node *dev, int index);
+
+
+/**
+ * scom_unmap - Unmap a block of SCOM registers
+ * @map: Result of scom_map is to be unmapped
+ */
+static inline void scom_unmap(scom_map_t map)
+{
+ if (scom_map_ok(map))
+ scom_controller->unmap(map);
+}
+
+/**
+ * scom_read - Read a SCOM register
+ * @map: Result of scom_map
+ * @reg: Register index within that map
+ */
+static inline u64 scom_read(scom_map_t map, u32 reg)
+{
+ return scom_controller->read(map, reg);
+}
+
+/**
+ * scom_write - Write to a SCOM register
+ * @map: Result of scom_map
+ * @reg: Register index within that map
+ * @value: Value to write
+ */
+static inline void scom_write(scom_map_t map, u32 reg, u64 value)
+{
+ scom_controller->write(map, reg, value);
+}
+
+#endif /* CONFIG_PPC_SCOM */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCOM_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index a902a0d..880b8c1 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -20,6 +20,7 @@
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
+#include <linux/irqreturn.h>
#ifndef __ASSEMBLY__
@@ -29,14 +30,32 @@
#include <asm/percpu.h>
extern int boot_cpuid;
+extern int boot_cpu_count;
extern void cpu_die(void);
#ifdef CONFIG_SMP
-extern void smp_send_debugger_break(int cpu);
-extern void smp_message_recv(int);
+struct smp_ops_t {
+ void (*message_pass)(int cpu, int msg);
+#ifdef CONFIG_PPC_SMP_MUXED_IPI
+ void (*cause_ipi)(int cpu, unsigned long data);
+#endif
+ int (*probe)(void);
+ int (*kick_cpu)(int nr);
+ void (*setup_cpu)(int nr);
+ void (*bringup_done)(void);
+ void (*take_timebase)(void);
+ void (*give_timebase)(void);
+ int (*cpu_disable)(void);
+ void (*cpu_die)(unsigned int nr);
+ int (*cpu_bootable)(unsigned int nr);
+};
+
+extern void smp_send_debugger_break(void);
extern void start_secondary_resume(void);
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
DECLARE_PER_CPU(unsigned int, cpu_pvr);
@@ -93,13 +112,16 @@
#define PPC_MSG_CALL_FUNC_SINGLE 2
#define PPC_MSG_DEBUGGER_BREAK 3
-/*
- * irq controllers that have dedicated ipis per message and don't
- * need additional code in the action handler may use this
- */
+/* for irq controllers that have dedicated ipis per message (4) */
extern int smp_request_message_ipi(int virq, int message);
extern const char *smp_ipi_name[];
+/* for irq controllers with only a single ipi */
+extern void smp_muxed_ipi_set_data(int cpu, unsigned long data);
+extern void smp_muxed_ipi_message_pass(int cpu, int msg);
+extern void smp_muxed_ipi_resend(void);
+extern irqreturn_t smp_ipi_demux(void);
+
void smp_init_iSeries(void);
void smp_init_pSeries(void);
void smp_init_cell(void);
@@ -149,7 +171,7 @@
extern int smp_mpic_probe(void);
extern void smp_mpic_setup_cpu(int cpu);
-extern void smp_generic_kick_cpu(int nr);
+extern int smp_generic_kick_cpu(int nr);
extern void smp_generic_give_timebase(void);
extern void smp_generic_take_timebase(void);
@@ -169,6 +191,8 @@
extern unsigned long __secondary_hold_acknowledge;
extern char __secondary_hold;
+extern irqreturn_t debug_ipi_action(int irq, void *data);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 60f64b1..8489d37 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -352,3 +352,4 @@
COMPAT_SYS_SPU(open_by_handle_at)
COMPAT_SYS_SPU(clock_adjtime)
SYSCALL_SPU(syncfs)
+COMPAT_SYS_SPU(sendmmsg)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index 5e474dd..2dc595d 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -219,8 +219,6 @@
extern int init_bootmem_done; /* set once bootmem is available */
extern phys_addr_t memory_limit;
extern unsigned long klimit;
-
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
extern int powersave_nap; /* set if nap mode can be used in idle loop */
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index d50a380..81143fc 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -79,6 +79,8 @@
#elif defined(CONFIG_PPC_STD_MMU_64)
+#define MMU_NO_CONTEXT 0
+
/*
* TLB flushing for 64-bit hash-MMU CPUs
*/
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 11ae699..58580e9 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -52,6 +52,7 @@
extern void __init udbg_init_40x_realmode(void);
extern void __init udbg_init_cpm(void);
extern void __init udbg_init_usbgecko(void);
+extern void __init udbg_init_wsp(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 3c21564..6d23c81 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -371,10 +371,11 @@
#define __NR_open_by_handle_at 346
#define __NR_clock_adjtime 347
#define __NR_syncfs 348
+#define __NR_sendmmsg 349
#ifdef __KERNEL__
-#define __NR_syscalls 349
+#define __NR_syscalls 350
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h
new file mode 100644
index 0000000..c7dc830
--- /dev/null
+++ b/arch/powerpc/include/asm/wsp.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_WSP_H
+#define __ASM_POWERPC_WSP_H
+
+extern int wsp_get_chip_id(struct device_node *dn);
+
+#endif /* __ASM_POWERPC_WSP_H */
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
new file mode 100644
index 0000000..b183a40
--- /dev/null
+++ b/arch/powerpc/include/asm/xics.h
@@ -0,0 +1,142 @@
+/*
+ * Common definitions accross all variants of ICP and ICS interrupt
+ * controllers.
+ */
+
+#ifndef _XICS_H
+#define _XICS_H
+
+#include <linux/interrupt.h>
+
+#define XICS_IPI 2
+#define XICS_IRQ_SPURIOUS 0
+
+/* Want a priority other than 0. Various HW issues require this. */
+#define DEFAULT_PRIORITY 5
+
+/*
+ * Mark IPIs as higher priority so we can take them inside interrupts that
+ * arent marked IRQF_DISABLED
+ */
+#define IPI_PRIORITY 4
+
+/* The least favored priority */
+#define LOWEST_PRIORITY 0xFF
+
+/* The number of priorities defined above */
+#define MAX_NUM_PRIORITIES 3
+
+/* Native ICP */
+extern int icp_native_init(void);
+
+/* PAPR ICP */
+extern int icp_hv_init(void);
+
+/* ICP ops */
+struct icp_ops {
+ unsigned int (*get_irq)(void);
+ void (*eoi)(struct irq_data *d);
+ void (*set_priority)(unsigned char prio);
+ void (*teardown_cpu)(void);
+ void (*flush_ipi)(void);
+#ifdef CONFIG_SMP
+ void (*cause_ipi)(int cpu, unsigned long data);
+ irq_handler_t ipi_action;
+#endif
+};
+
+extern const struct icp_ops *icp_ops;
+
+/* Native ICS */
+extern int ics_native_init(void);
+
+/* RTAS ICS */
+extern int ics_rtas_init(void);
+
+/* ICS instance, hooked up to chip_data of an irq */
+struct ics {
+ struct list_head link;
+ int (*map)(struct ics *ics, unsigned int virq);
+ void (*mask_unknown)(struct ics *ics, unsigned long vec);
+ long (*get_server)(struct ics *ics, unsigned long vec);
+ int (*host_match)(struct ics *ics, struct device_node *node);
+ char data[];
+};
+
+/* Commons */
+extern unsigned int xics_default_server;
+extern unsigned int xics_default_distrib_server;
+extern unsigned int xics_interrupt_server_size;
+extern struct irq_host *xics_host;
+
+struct xics_cppr {
+ unsigned char stack[MAX_NUM_PRIORITIES];
+ int index;
+};
+
+DECLARE_PER_CPU(struct xics_cppr, xics_cppr);
+
+static inline void xics_push_cppr(unsigned int vec)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
+ return;
+
+ if (vec == XICS_IPI)
+ os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
+ else
+ os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
+}
+
+static inline unsigned char xics_pop_cppr(void)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ if (WARN_ON(os_cppr->index < 1))
+ return LOWEST_PRIORITY;
+
+ return os_cppr->stack[--os_cppr->index];
+}
+
+static inline void xics_set_base_cppr(unsigned char cppr)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ /* we only really want to set the priority when there's
+ * just one cppr value on the stack
+ */
+ WARN_ON(os_cppr->index != 0);
+
+ os_cppr->stack[0] = cppr;
+}
+
+static inline unsigned char xics_cppr_top(void)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ return os_cppr->stack[os_cppr->index];
+}
+
+DECLARE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
+
+extern void xics_init(void);
+extern void xics_setup_cpu(void);
+extern void xics_update_irq_servers(void);
+extern void xics_set_cpu_giq(unsigned int gserver, unsigned int join);
+extern void xics_mask_unknown_vec(unsigned int vec);
+extern irqreturn_t xics_ipi_dispatch(int cpu);
+extern int xics_smp_probe(void);
+extern void xics_register_ics(struct ics *ics);
+extern void xics_teardown_cpu(void);
+extern void xics_kexec_teardown_cpu(int secondary);
+extern void xics_migrate_irqs_away(void);
+#ifdef CONFIG_SMP
+extern int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask,
+ unsigned int strict_check);
+#else
+#define xics_get_irq_server(virq, cpumask, strict_check) (xics_default_server)
+#endif
+
+
+#endif /* _XICS_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 3bb2a3e..9aab363 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -38,11 +38,14 @@
paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
+obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power7.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
+obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
+obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o
obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
procfs-y := proc_powerpc.o
@@ -75,7 +78,6 @@
obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o
extra-y := head_$(CONFIG_WORD_SIZE).o
-extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o
extra-$(CONFIG_40x) := head_40x.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
@@ -103,6 +105,8 @@
obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
+obj-$(CONFIG_PPC_IO_WORKAROUNDS) += io-workarounds.o
+
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 23e6a93..6887661 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -74,6 +74,7 @@
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(NMI_MASK, NMI_MASK);
+ DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
#else
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
new file mode 100644
index 0000000..7f818fe
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_a2.S
@@ -0,0 +1,114 @@
+/*
+ * A2 specific assembly support code
+ *
+ * Copyright 2009 Ben Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
+#include <asm/ppc-opcode.h>
+#include <asm/processor.h>
+#include <asm/reg_a2.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+
+/*
+ * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
+ * This also prevents external LPID accesses but that isn't a problem when not a
+ * guest. Under PV, this setting will be ignored and MMUCR will return the right
+ * number of PID bits we can use.
+ */
+#define MMUCR1_EXTEND_PID \
+ (MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
+ MMUCR1_DTTID | MMUCR1_DCCD)
+
+/*
+ * Use extended PIDs if enabled.
+ * Don't clear the ERATs on context sync events and enable I & D LRU.
+ * Enable ERAT back invalidate when tlbwe overwrites an entry.
+ */
+#define INITIAL_MMUCR1 \
+ (MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
+ MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
+
+_GLOBAL(__setup_cpu_a2)
+ /* Some of these are actually thread local and some are
+ * core local but doing it always won't hurt
+ */
+
+#ifdef CONFIG_PPC_WSP_COPRO
+ /* Make sure ACOP starts out as zero */
+ li r3,0
+ mtspr SPRN_ACOP,r3
+
+ /* Enable icswx instruction */
+ mfspr r3,SPRN_A2_CCR2
+ ori r3,r3,A2_CCR2_ENABLE_ICSWX
+ mtspr SPRN_A2_CCR2,r3
+
+ /* Unmask all CTs in HACOP */
+ li r3,-1
+ mtspr SPRN_HACOP,r3
+#endif /* CONFIG_PPC_WSP_COPRO */
+
+ /* Enable doorbell */
+ mfspr r3,SPRN_A2_CCR2
+ oris r3,r3,A2_CCR2_ENABLE_PC@h
+ mtspr SPRN_A2_CCR2,r3
+ isync
+
+ /* Setup CCR0 to disable power saving for now as it's busted
+ * in the current implementations. Setup CCR1 to wake on
+ * interrupts normally (we write the default value but who
+ * knows what FW may have clobbered...)
+ */
+ li r3,0
+ mtspr SPRN_A2_CCR0, r3
+ LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
+ mtspr SPRN_A2_CCR1, r3
+
+ /* Initialise MMUCR1 */
+ lis r3,INITIAL_MMUCR1@h
+ ori r3,r3,INITIAL_MMUCR1@l
+ mtspr SPRN_MMUCR1,r3
+
+ /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
+ LOAD_REG_IMMEDIATE(r3, 0x000a7531)
+ mtspr SPRN_MMUCR2,r3
+
+ /* Set MMUCR3 to write all thids bit to the TLB */
+ LOAD_REG_IMMEDIATE(r3, 0x0000000f)
+ mtspr SPRN_MMUCR3,r3
+
+ /* Don't do ERAT stuff if running guest mode */
+ mfmsr r3
+ andis. r0,r3,MSR_GS@h
+ bne 1f
+
+ /* Now set the I-ERAT watermark to 15 */
+ lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
+ mtspr SPRN_MMUCR0, r4
+ li r4,A2_IERAT_SIZE-1
+ PPC_ERATWE(r4,r4,3)
+
+ /* Now set the D-ERAT watermark to 31 */
+ lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
+ mtspr SPRN_MMUCR0, r4
+ li r4,A2_DERAT_SIZE-1
+ PPC_ERATWE(r4,r4,3)
+
+ /* And invalidate the beast just in case. That won't get rid of
+ * a bolted entry though it will be in LRU and so will go away eventually
+ * but let's not bother for now
+ */
+ PPC_ERATILX(0,0,0)
+1:
+ blr
+
+_GLOBAL(__restore_cpu_a2)
+ b __setup_cpu_a2
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 9136111..8053db0 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -88,6 +88,9 @@
bl __e500_dcache_setup
#ifdef CONFIG_PPC_BOOK3E_64
bl .__setup_base_ivors
+ bl .setup_perfmon_ivor
+ bl .setup_doorbell_ivors
+ bl .setup_ehv_ivors
#else
bl __setup_e500mc_ivors
#endif
diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power7.S
new file mode 100644
index 0000000..4f9a93f
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_power7.S
@@ -0,0 +1,91 @@
+/*
+ * This file contains low level CPU setup functions.
+ * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+/* Entry: r3 = crap, r4 = ptr to cputable entry
+ *
+ * Note that we can be called twice for pseudo-PVRs
+ */
+_GLOBAL(__setup_cpu_power7)
+ mflr r11
+ bl __init_hvmode_206
+ mtlr r11
+ beqlr
+ li r0,0
+ mtspr SPRN_LPID,r0
+ bl __init_LPCR
+ bl __init_TLB
+ mtlr r11
+ blr
+
+_GLOBAL(__restore_cpu_power7)
+ mflr r11
+ mfmsr r3
+ rldicl. r0,r3,4,63
+ beqlr
+ li r0,0
+ mtspr SPRN_LPID,r0
+ bl __init_LPCR
+ bl __init_TLB
+ mtlr r11
+ blr
+
+__init_hvmode_206:
+ /* Disable CPU_FTR_HVMODE_206 and exit if MSR:HV is not set */
+ mfmsr r3
+ rldicl. r0,r3,4,63
+ bnelr
+ ld r5,CPU_SPEC_FEATURES(r4)
+ LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE_206)
+ xor r5,r5,r6
+ std r5,CPU_SPEC_FEATURES(r4)
+ blr
+
+__init_LPCR:
+ /* Setup a sane LPCR:
+ *
+ * LPES = 0b01 (HSRR0/1 used for 0x500)
+ * PECE = 0b111
+ * DPFD = 4
+ *
+ * Other bits untouched for now
+ */
+ mfspr r3,SPRN_LPCR
+ ori r3,r3,(LPCR_LPES0|LPCR_LPES1)
+ xori r3,r3, LPCR_LPES0
+ ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
+ li r5,7
+ sldi r5,r5,LPCR_DPFD_SH
+ andc r3,r3,r5
+ li r5,4
+ sldi r5,r5,LPCR_DPFD_SH
+ or r3,r3,r5
+ mtspr SPRN_LPCR,r3
+ isync
+ blr
+
+__init_TLB:
+ /* Clear the TLB */
+ li r6,128
+ mtctr r6
+ li r7,0xc00 /* IS field = 0b11 */
+ ptesync
+2: tlbiel r7
+ addi r7,r7,0x1000
+ bdnz 2b
+ ptesync
+1: blr
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index b9602ee..34d2722 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -62,10 +62,12 @@
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_a2(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
+extern void __restore_cpu_a2(void);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_E500)
extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
@@ -199,7 +201,7 @@
.cpu_name = "POWER4 (gp)",
.cpu_features = CPU_FTRS_POWER4,
.cpu_user_features = COMMON_USER_POWER4,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER4,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -214,7 +216,7 @@
.cpu_name = "POWER4+ (gq)",
.cpu_features = CPU_FTRS_POWER4,
.cpu_user_features = COMMON_USER_POWER4,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER4,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -230,7 +232,7 @@
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -248,7 +250,7 @@
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -284,7 +286,7 @@
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -302,7 +304,7 @@
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -318,7 +320,7 @@
.cpu_name = "POWER5 (gr)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER5,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -338,7 +340,7 @@
.cpu_name = "POWER5+ (gs)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER5,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -354,7 +356,7 @@
.cpu_name = "POWER5+ (gs)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER5,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -371,7 +373,7 @@
.cpu_name = "POWER5+",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER5,
.icache_bsize = 128,
.dcache_bsize = 128,
.oprofile_cpu_type = "ppc64/ibm-compat-v1",
@@ -385,7 +387,7 @@
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6 |
PPC_FEATURE_POWER6_EXT,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER6,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -404,7 +406,7 @@
.cpu_name = "POWER6 (architected)",
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_POWER6,
.icache_bsize = 128,
.dcache_bsize = 128,
.oprofile_cpu_type = "ppc64/ibm-compat-v1",
@@ -417,12 +419,13 @@
.cpu_name = "POWER7 (architected)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
- .mmu_features = MMU_FTR_HPTE_TABLE |
- MMU_FTR_TLBIE_206,
+ .mmu_features = MMU_FTRS_POWER7,
.icache_bsize = 128,
.dcache_bsize = 128,
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .cpu_setup = __setup_cpu_power7,
+ .cpu_restore = __restore_cpu_power7,
.platform = "power7",
},
{ /* Power7 */
@@ -431,14 +434,15 @@
.cpu_name = "POWER7 (raw)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
- .mmu_features = MMU_FTR_HPTE_TABLE |
- MMU_FTR_TLBIE_206,
+ .mmu_features = MMU_FTRS_POWER7,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power7",
.oprofile_type = PPC_OPROFILE_POWER4,
+ .cpu_setup = __setup_cpu_power7,
+ .cpu_restore = __restore_cpu_power7,
.platform = "power7",
},
{ /* Power7+ */
@@ -447,14 +451,15 @@
.cpu_name = "POWER7+ (raw)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
- .mmu_features = MMU_FTR_HPTE_TABLE |
- MMU_FTR_TLBIE_206,
+ .mmu_features = MMU_FTRS_POWER7,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power7",
.oprofile_type = PPC_OPROFILE_POWER4,
+ .cpu_setup = __setup_cpu_power7,
+ .cpu_restore = __restore_cpu_power7,
.platform = "power7+",
},
{ /* Cell Broadband Engine */
@@ -465,7 +470,7 @@
.cpu_user_features = COMMON_USER_PPC64 |
PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
PPC_FEATURE_SMT,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_CELL,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 4,
@@ -480,7 +485,7 @@
.cpu_name = "PA6T",
.cpu_features = CPU_FTRS_PA6T,
.cpu_user_features = COMMON_USER_PA6T,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PA6T,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 6,
@@ -497,7 +502,7 @@
.cpu_name = "POWER4 (compatible)",
.cpu_features = CPU_FTRS_COMPATIBLE,
.cpu_user_features = COMMON_USER_PPC64,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_DEFAULT_HPTE_ARCH_V2,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -2005,7 +2010,22 @@
#endif /* CONFIG_PPC32 */
#endif /* CONFIG_E500 */
-#ifdef CONFIG_PPC_BOOK3E_64
+#ifdef CONFIG_PPC_A2
+ { /* Standard A2 (>= DD2) + FPU core */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00480000,
+ .cpu_name = "A2 (>= DD2)",
+ .cpu_features = CPU_FTRS_A2,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTRS_A2,
+ .icache_bsize = 64,
+ .dcache_bsize = 64,
+ .num_pmcs = 0,
+ .cpu_setup = __setup_cpu_a2,
+ .cpu_restore = __restore_cpu_a2,
+ .machine_check = machine_check_generic,
+ .platform = "ppca2",
+ },
{ /* This is a default entry to get going, to be replaced by
* a real one at some stage
*/
@@ -2026,7 +2046,7 @@
.machine_check = machine_check_generic,
.platform = "power6",
},
-#endif
+#endif /* CONFIG_PPC_A2 */
};
static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 5b5e1f0..4e6ee94 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -64,9 +64,9 @@
return;
hard_irq_disable();
- if (!cpu_isset(cpu, cpus_in_crash))
+ if (!cpumask_test_cpu(cpu, &cpus_in_crash))
crash_save_cpu(regs, cpu);
- cpu_set(cpu, cpus_in_crash);
+ cpumask_set_cpu(cpu, &cpus_in_crash);
/*
* Entered via soft-reset - could be the kdump
@@ -77,8 +77,8 @@
* Tell the kexec CPU that entered via soft-reset and ready
* to go down.
*/
- if (cpu_isset(cpu, cpus_in_sr)) {
- cpu_clear(cpu, cpus_in_sr);
+ if (cpumask_test_cpu(cpu, &cpus_in_sr)) {
+ cpumask_clear_cpu(cpu, &cpus_in_sr);
atomic_inc(&enter_on_soft_reset);
}
@@ -87,7 +87,7 @@
* This barrier is needed to make sure that all CPUs are stopped.
* If not, soft-reset will be invoked to bring other CPUs.
*/
- while (!cpu_isset(crashing_cpu, cpus_in_crash))
+ while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash))
cpu_relax();
if (ppc_md.kexec_cpu_down)
@@ -109,7 +109,7 @@
{
unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
- cpu_clear(cpu, cpus_in_sr);
+ cpumask_clear_cpu(cpu, &cpus_in_sr);
while (atomic_read(&enter_on_soft_reset) != ncpus)
cpu_relax();
}
@@ -132,7 +132,7 @@
*/
printk(KERN_EMERG "Sending IPI to other cpus...\n");
msecs = 10000;
- while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+ while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
cpu_relax();
mdelay(1);
}
@@ -144,52 +144,24 @@
* user to do soft reset such that we get all.
* Soft-reset will be used until better mechanism is implemented.
*/
- if (cpus_weight(cpus_in_crash) < ncpus) {
+ if (cpumask_weight(&cpus_in_crash) < ncpus) {
printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
- ncpus - cpus_weight(cpus_in_crash));
+ ncpus - cpumask_weight(&cpus_in_crash));
printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
- cpus_in_sr = CPU_MASK_NONE;
+ cpumask_clear(&cpus_in_sr);
atomic_set(&enter_on_soft_reset, 0);
- while (cpus_weight(cpus_in_crash) < ncpus)
+ while (cpumask_weight(&cpus_in_crash) < ncpus)
cpu_relax();
}
/*
* Make sure all CPUs are entered via soft-reset if the kdump is
* invoked using soft-reset.
*/
- if (cpu_isset(cpu, cpus_in_sr))
+ if (cpumask_test_cpu(cpu, &cpus_in_sr))
crash_soft_reset_check(cpu);
/* Leave the IPI callback set */
}
-/* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#ifdef CONFIG_PPC_STD_MMU_64
-static void crash_kexec_wait_realmode(int cpu)
-{
- unsigned int msecs;
- int i;
-
- msecs = 10000;
- for (i=0; i < NR_CPUS && msecs > 0; i++) {
- if (i == cpu)
- continue;
-
- while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
- barrier();
- if (!cpu_possible(i)) {
- break;
- }
- if (!cpu_online(i)) {
- break;
- }
- msecs--;
- mdelay(1);
- }
- }
- mb();
-}
-#endif /* CONFIG_PPC_STD_MMU_64 */
-
/*
* This function will be called by secondary cpus or by kexec cpu
* if soft-reset is activated to stop some CPUs.
@@ -210,7 +182,7 @@
* exited using 'x'(exit and recover) or
* kexec_should_crash() failed for all running tasks.
*/
- cpu_clear(cpu, cpus_in_sr);
+ cpumask_clear_cpu(cpu, &cpus_in_sr);
local_irq_restore(flags);
return;
}
@@ -224,7 +196,7 @@
* then start kexec boot.
*/
crash_soft_reset_check(cpu);
- cpu_set(crashing_cpu, cpus_in_crash);
+ cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
machine_kexec(kexec_crash_image);
@@ -234,7 +206,6 @@
}
#else /* ! CONFIG_SMP */
-static inline void crash_kexec_wait_realmode(int cpu) {}
static void crash_kexec_prepare_cpus(int cpu)
{
@@ -253,10 +224,40 @@
void crash_kexec_secondary(struct pt_regs *regs)
{
- cpus_in_sr = CPU_MASK_NONE;
+ cpumask_clear(&cpus_in_sr);
}
#endif /* CONFIG_SMP */
+/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64)
+static void crash_kexec_wait_realmode(int cpu)
+{
+ unsigned int msecs;
+ int i;
+
+ msecs = 10000;
+ for (i=0; i < nr_cpu_ids && msecs > 0; i++) {
+ if (i == cpu)
+ continue;
+
+ while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
+ barrier();
+ if (!cpu_possible(i)) {
+ break;
+ }
+ if (!cpu_online(i)) {
+ break;
+ }
+ msecs--;
+ mdelay(1);
+ }
+ }
+ mb();
+}
+#else
+static inline void crash_kexec_wait_realmode(int cpu) {}
+#endif /* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */
+
/*
* Register a function to be called on shutdown. Only use this if you
* can't reset your device in the second kernel.
@@ -345,7 +346,7 @@
crashing_cpu = smp_processor_id();
crash_save_cpu(regs, crashing_cpu);
crash_kexec_prepare_cpus(crashing_cpu);
- cpu_set(crashing_cpu, cpus_in_crash);
+ cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
crash_kexec_wait_realmode(crashing_cpu);
machine_kexec_mask_interrupts();
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 3307a52..2cc451a 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -13,84 +13,35 @@
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/threads.h>
-#include <linux/percpu.h>
+#include <linux/hardirq.h>
#include <asm/dbell.h>
#include <asm/irq_regs.h>
#ifdef CONFIG_SMP
-struct doorbell_cpu_info {
- unsigned long messages; /* current messages bits */
- unsigned int tag; /* tag value */
-};
-
-static DEFINE_PER_CPU(struct doorbell_cpu_info, doorbell_cpu_info);
-
void doorbell_setup_this_cpu(void)
{
- struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
+ unsigned long tag = mfspr(SPRN_PIR) & 0x3fff;
- info->messages = 0;
- info->tag = mfspr(SPRN_PIR) & 0x3fff;
+ smp_muxed_ipi_set_data(smp_processor_id(), tag);
}
-void doorbell_message_pass(int target, int msg)
+void doorbell_cause_ipi(int cpu, unsigned long data)
{
- struct doorbell_cpu_info *info;
- int i;
-
- if (target < NR_CPUS) {
- info = &per_cpu(doorbell_cpu_info, target);
- set_bit(msg, &info->messages);
- ppc_msgsnd(PPC_DBELL, 0, info->tag);
- }
- else if (target == MSG_ALL_BUT_SELF) {
- for_each_online_cpu(i) {
- if (i == smp_processor_id())
- continue;
- info = &per_cpu(doorbell_cpu_info, i);
- set_bit(msg, &info->messages);
- ppc_msgsnd(PPC_DBELL, 0, info->tag);
- }
- }
- else { /* target == MSG_ALL */
- for_each_online_cpu(i) {
- info = &per_cpu(doorbell_cpu_info, i);
- set_bit(msg, &info->messages);
- }
- ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0);
- }
+ ppc_msgsnd(PPC_DBELL, 0, data);
}
void doorbell_exception(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
- struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
- int msg;
- /* Warning: regs can be NULL when called from irq enable */
+ irq_enter();
- if (!info->messages || (num_online_cpus() < 2))
- goto out;
+ smp_ipi_demux();
- for (msg = 0; msg < 4; msg++)
- if (test_and_clear_bit(msg, &info->messages))
- smp_message_recv(msg);
-
-out:
+ irq_exit();
set_irq_regs(old_regs);
}
-
-void doorbell_check_self(void)
-{
- struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
-
- if (!info->messages)
- return;
-
- ppc_msgsnd(PPC_DBELL, 0, info->tag);
-}
-
#else /* CONFIG_SMP */
void doorbell_exception(struct pt_regs *regs)
{
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d82878c..d834425 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -421,6 +421,12 @@
std r24,THREAD_VRSAVE(r3)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+ mfspr r25,SPRN_DSCR
+ std r25,THREAD_DSCR(r3)
+END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
+#endif
and. r0,r0,r22
beq+ 1f
andc r22,r22,r0
@@ -462,10 +468,10 @@
FTR_SECTION_ELSE_NESTED(95)
clrrdi r6,r8,40 /* get its 1T ESID */
clrrdi r9,r1,40 /* get current sp 1T ESID */
- ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95)
FTR_SECTION_ELSE
b 2f
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB)
clrldi. r0,r6,2 /* is new ESID c00000000? */
cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */
cror eq,4*cr1+eq,eq
@@ -479,7 +485,7 @@
li r9,MMU_SEGSIZE_1T /* insert B field */
oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Update the last bolted SLB. No write barriers are needed
* here, provided we only update the current CPU's SLB shadow
@@ -491,7 +497,7 @@
std r7,SLBSHADOW_STACKVSID(r9) /* Save VSID */
std r0,SLBSHADOW_STACKESID(r9) /* Save ESID */
- /* No need to check for CPU_FTR_NO_SLBIE_B here, since when
+ /* No need to check for MMU_FTR_NO_SLBIE_B here, since when
* we have 1TB segments, the only CPUs known to have the errata
* only support less than 1TB of system memory and we'll never
* actually hit this code path.
@@ -522,6 +528,15 @@
mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+ ld r0,THREAD_DSCR(r4)
+ cmpd r0,r25
+ beq 1f
+ mtspr SPRN_DSCR,r0
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
+#endif
/* r3-r13 are destroyed -- Cort */
REST_8GPRS(14, r1)
@@ -838,7 +853,7 @@
_STATIC(rtas_return_loc)
/* relocation is off at this point */
- mfspr r4,SPRN_SPRG_PACA /* Get PACA */
+ GET_PACA(r4)
clrldi r4,r4,2 /* convert to realmode address */
bcl 20,31,$+4
@@ -869,7 +884,7 @@
REST_8GPRS(14, r1) /* Restore the non-volatiles */
REST_10GPRS(22, r1) /* ditto */
- mfspr r13,SPRN_SPRG_PACA
+ GET_PACA(r13)
ld r4,_CCR(r1)
mtcr r4
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 9651acc..d24d440 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -17,6 +17,7 @@
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/thread_info.h>
+#include <asm/reg_a2.h>
#include <asm/exception-64e.h>
#include <asm/bug.h>
#include <asm/irqflags.h>
@@ -252,9 +253,6 @@
.balign 0x1000
.globl interrupt_base_book3e
interrupt_base_book3e: /* fake trap */
- /* Note: If real debug exceptions are supported by the HW, the vector
- * below will have to be patched up to point to an appropriate handler
- */
EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */
EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */
EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */
@@ -271,8 +269,13 @@
EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */
EXCEPTION_STUB(0x1c0, data_tlb_miss)
EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+ EXCEPTION_STUB(0x260, perfmon)
EXCEPTION_STUB(0x280, doorbell)
EXCEPTION_STUB(0x2a0, doorbell_crit)
+ EXCEPTION_STUB(0x2c0, guest_doorbell)
+ EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
+ EXCEPTION_STUB(0x300, hypercall)
+ EXCEPTION_STUB(0x320, ehpriv)
.globl interrupt_end_book3e
interrupt_end_book3e:
@@ -454,6 +457,70 @@
kernel_dbg_exc:
b . /* NYI */
+/* Debug exception as a debug interrupt*/
+ START_EXCEPTION(debug_debug);
+ DBG_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+ /*
+ * If there is a single step or branch-taken exception in an
+ * exception entry sequence, it was probably meant to apply to
+ * the code where the exception occurred (since exception entry
+ * doesn't turn off DE automatically). We simulate the effect
+ * of turning off DE on entry to an exception handler by turning
+ * off DE in the DSRR1 value and clearing the debug status.
+ */
+
+ mfspr r14,SPRN_DBSR /* check single-step/branch taken */
+ andis. r15,r14,DBSR_IC@h
+ beq+ 1f
+
+ LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+ LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+ cmpld cr0,r10,r14
+ cmpld cr1,r10,r15
+ blt+ cr0,1f
+ bge+ cr1,1f
+
+ /* here it looks like we got an inappropriate debug exception. */
+ lis r14,DBSR_IC@h /* clear the IC event */
+ rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */
+ mtspr SPRN_DBSR,r14
+ mtspr SPRN_DSRR1,r11
+ lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */
+ ld r1,PACA_EXDBG+EX_R1(r13)
+ ld r14,PACA_EXDBG+EX_R14(r13)
+ ld r15,PACA_EXDBG+EX_R15(r13)
+ mtcr r10
+ ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */
+ ld r11,PACA_EXDBG+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_DBG_SCRATCH
+ rfdi
+
+ /* Normal debug exception */
+ /* XXX We only handle coming from userspace for now since we can't
+ * quite save properly an interrupted kernel state yet
+ */
+1: andi. r14,r11,MSR_PR; /* check for userspace again */
+ beq kernel_dbg_exc; /* if from kernel mode */
+
+ /* Now we mash up things to make it look like we are coming on a
+ * normal exception
+ */
+ mfspr r15,SPRN_SPRG_DBG_SCRATCH
+ mtspr SPRN_SPRG_GEN_SCRATCH,r15
+ mfspr r14,SPRN_DBSR
+ EXCEPTION_COMMON(0xd00, PACA_EXDBG, INTS_DISABLE_ALL)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ ld r14,PACA_EXDBG+EX_R14(r13)
+ ld r15,PACA_EXDBG+EX_R15(r13)
+ bl .save_nvgprs
+ bl .DebugException
+ b .ret_from_except
+
+ MASKABLE_EXCEPTION(0x260, perfmon, .performance_monitor_exception, ACK_NONE)
+
/* Doorbell interrupt */
MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE)
@@ -468,6 +535,11 @@
// b ret_from_crit_except
b .
+ MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE)
+ MASKABLE_EXCEPTION(0x2e0, guest_doorbell_crit, .unknown_exception, ACK_NONE)
+ MASKABLE_EXCEPTION(0x310, hypercall, .unknown_exception, ACK_NONE)
+ MASKABLE_EXCEPTION(0x320, ehpriv, .unknown_exception, ACK_NONE)
+
/*
* An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -587,7 +659,12 @@
BAD_STACK_TRAMPOLINE(0x000)
BAD_STACK_TRAMPOLINE(0x100)
BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x260)
+BAD_STACK_TRAMPOLINE(0x2c0)
+BAD_STACK_TRAMPOLINE(0x2e0)
BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x310)
+BAD_STACK_TRAMPOLINE(0x320)
BAD_STACK_TRAMPOLINE(0x400)
BAD_STACK_TRAMPOLINE(0x500)
BAD_STACK_TRAMPOLINE(0x600)
@@ -864,8 +941,23 @@
* that will have to be made dependent on whether we are running under
* a hypervisor I suppose.
*/
- ori r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
- mtspr SPRN_MAS0,r3
+
+ /* BEWARE, MAGIC
+ * This code is called as an ordinary function on the boot CPU. But to
+ * avoid duplication, this code is also used in SCOM bringup of
+ * secondary CPUs. We read the code between the initial_tlb_code_start
+ * and initial_tlb_code_end labels one instruction at a time and RAM it
+ * into the new core via SCOM. That doesn't process branches, so there
+ * must be none between those two labels. It also means if this code
+ * ever takes any parameters, the SCOM code must also be updated to
+ * provide them.
+ */
+ .globl a2_tlbinit_code_start
+a2_tlbinit_code_start:
+
+ ori r11,r3,MAS0_WQ_ALLWAYS
+ oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
+ mtspr SPRN_MAS0,r11
lis r3,(MAS1_VALID | MAS1_IPROT)@h
ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
mtspr SPRN_MAS1,r3
@@ -879,18 +971,86 @@
/* Write the TLB entry */
tlbwe
+ .globl a2_tlbinit_after_linear_map
+a2_tlbinit_after_linear_map:
+
/* Now we branch the new virtual address mapped by this entry */
LOAD_REG_IMMEDIATE(r3,1f)
mtctr r3
bctr
1: /* We are now running at PAGE_OFFSET, clean the TLB of everything
- * else (XXX we should scan for bolted crap from the firmware too)
+ * else (including IPROTed things left by firmware)
+ * r4 = TLBnCFG
+ * r3 = current address (more or less)
*/
+
+ li r5,0
+ mtspr SPRN_MAS6,r5
+ tlbsx 0,r3
+
+ rlwinm r9,r4,0,TLBnCFG_N_ENTRY
+ rlwinm r10,r4,8,0xff
+ addi r10,r10,-1 /* Get inner loop mask */
+
+ li r3,1
+
+ mfspr r5,SPRN_MAS1
+ rlwinm r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
+
+ mfspr r6,SPRN_MAS2
+ rldicr r6,r6,0,51 /* Extract EPN */
+
+ mfspr r7,SPRN_MAS0
+ rlwinm r7,r7,0,0xffff0fff /* Clear HES and WQ */
+
+ rlwinm r8,r7,16,0xfff /* Extract ESEL */
+
+2: add r4,r3,r8
+ and r4,r4,r10
+
+ rlwimi r7,r4,16,MAS0_ESEL_MASK
+
+ mtspr SPRN_MAS0,r7
+ mtspr SPRN_MAS1,r5
+ mtspr SPRN_MAS2,r6
+ tlbwe
+
+ addi r3,r3,1
+ and. r4,r3,r10
+
+ bne 3f
+ addis r6,r6,(1<<30)@h
+3:
+ cmpw r3,r9
+ blt 2b
+
+ .globl a2_tlbinit_after_iprot_flush
+a2_tlbinit_after_iprot_flush:
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+ /* Now establish early debug mappings if applicable */
+ /* Restore the MAS0 we used for linear mapping load */
+ mtspr SPRN_MAS0,r11
+
+ lis r3,(MAS1_VALID | MAS1_IPROT)@h
+ ori r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
+ mtspr SPRN_MAS1,r3
+ LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
+ mtspr SPRN_MAS2,r3
+ LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
+ mtspr SPRN_MAS7_MAS3,r3
+ /* re-use the MAS8 value from the linear mapping */
+ tlbwe
+#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
+
PPC_TLBILX(0,0,0)
sync
isync
+ .globl a2_tlbinit_code_end
+a2_tlbinit_code_end:
+
/* We translate LR and return */
mflr r3
tovirt(r3,r3)
@@ -1040,3 +1200,33 @@
sync
blr
+
+_GLOBAL(setup_perfmon_ivor)
+ SET_IVOR(35, 0x260) /* Performance Monitor */
+ blr
+
+_GLOBAL(setup_doorbell_ivors)
+ SET_IVOR(36, 0x280) /* Processor Doorbell */
+ SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
+
+ /* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
+ mfspr r10,SPRN_MMUCFG
+ rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
+ beqlr
+
+ SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
+ SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
+ blr
+
+_GLOBAL(setup_ehv_ivors)
+ /*
+ * We may be running as a guest and lack E.HV even on a chip
+ * that normally has it.
+ */
+ mfspr r10,SPRN_MMUCFG
+ rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
+ beqlr
+
+ SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
+ SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
+ blr
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index aeb739e..a85f487 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -37,23 +37,51 @@
.globl __start_interrupts
__start_interrupts:
- STD_EXCEPTION_PSERIES(0x100, system_reset)
+ .globl system_reset_pSeries;
+system_reset_pSeries:
+ HMT_MEDIUM;
+ DO_KVM 0x100;
+ SET_SCRATCH0(r13)
+#ifdef CONFIG_PPC_P7_NAP
+BEGIN_FTR_SECTION
+ /* Running native on arch 2.06 or later, check if we are
+ * waking up from nap. We only handle no state loss and
+ * supervisor state loss. We do -not- handle hypervisor
+ * state loss at this time.
+ */
+ mfspr r13,SPRN_SRR1
+ rlwinm r13,r13,47-31,30,31
+ cmpwi cr0,r13,1
+ bne 1f
+ b .power7_wakeup_noloss
+1: cmpwi cr0,r13,2
+ bne 1f
+ b .power7_wakeup_loss
+ /* Total loss of HV state is fatal, we could try to use the
+ * PIR to locate a PACA, then use an emergency stack etc...
+ * but for now, let's just stay stuck here
+ */
+1: cmpwi cr0,r13,3
+ beq .
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE_206)
+#endif /* CONFIG_PPC_P7_NAP */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
. = 0x200
_machine_check_pSeries:
HMT_MEDIUM
DO_KVM 0x200
- mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+ SET_SCRATCH0(r13)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, EXC_STD)
. = 0x300
.globl data_access_pSeries
data_access_pSeries:
HMT_MEDIUM
DO_KVM 0x300
- mtspr SPRN_SPRG_SCRATCH0,r13
+ SET_SCRATCH0(r13)
BEGIN_FTR_SECTION
- mfspr r13,SPRN_SPRG_PACA
+ GET_PACA(r13)
std r9,PACA_EXSLB+EX_R9(r13)
std r10,PACA_EXSLB+EX_R10(r13)
mfspr r10,SPRN_DAR
@@ -67,22 +95,22 @@
std r11,PACA_EXGEN+EX_R11(r13)
ld r11,PACA_EXSLB+EX_R9(r13)
std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r12,SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r12)
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R9(r13)
std r12,PACA_EXGEN+EX_R13(r13)
- EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+ EXCEPTION_PROLOG_PSERIES_1(data_access_common, EXC_STD)
FTR_SECTION_ELSE
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB)
. = 0x380
.globl data_access_slb_pSeries
data_access_slb_pSeries:
HMT_MEDIUM
DO_KVM 0x380
- mtspr SPRN_SPRG_SCRATCH0,r13
- mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
+ SET_SCRATCH0(r13)
+ GET_PACA(r13)
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
@@ -95,7 +123,7 @@
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
@@ -113,15 +141,15 @@
bctr
#endif
- STD_EXCEPTION_PSERIES(0x400, instruction_access)
+ STD_EXCEPTION_PSERIES(0x400, 0x400, instruction_access)
. = 0x480
.globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
HMT_MEDIUM
DO_KVM 0x480
- mtspr SPRN_SPRG_SCRATCH0,r13
- mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
+ SET_SCRATCH0(r13)
+ GET_PACA(r13)
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
@@ -134,7 +162,7 @@
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
@@ -147,13 +175,29 @@
bctr
#endif
- MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
- STD_EXCEPTION_PSERIES(0x600, alignment)
- STD_EXCEPTION_PSERIES(0x700, program_check)
- STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
- MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
- STD_EXCEPTION_PSERIES(0xa00, trap_0a)
- STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+ /* We open code these as we can't have a ". = x" (even with
+ * x = "." within a feature section
+ */
+ . = 0x500;
+ .globl hardware_interrupt_pSeries;
+ .globl hardware_interrupt_hv;
+hardware_interrupt_pSeries:
+hardware_interrupt_hv:
+ BEGIN_FTR_SECTION
+ _MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD)
+ FTR_SECTION_ELSE
+ _MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV)
+ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_HVMODE_206)
+
+ STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
+ STD_EXCEPTION_PSERIES(0x700, 0x700, program_check)
+ STD_EXCEPTION_PSERIES(0x800, 0x800, fp_unavailable)
+
+ MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
+ MASKABLE_EXCEPTION_HV(0x980, 0x980, decrementer)
+
+ STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
+ STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b)
. = 0xc00
.globl system_call_pSeries
@@ -165,13 +209,13 @@
beq- 1f
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
mr r9,r13
- mfspr r13,SPRN_SPRG_PACA
+ GET_PACA(r13)
mfspr r11,SPRN_SRR0
- ld r12,PACAKBASE(r13)
- ld r10,PACAKMSR(r13)
- LOAD_HANDLER(r12, system_call_entry)
- mtspr SPRN_SRR0,r12
mfspr r12,SPRN_SRR1
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, system_call_entry)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
b . /* prevent speculative execution */
@@ -183,8 +227,21 @@
rfid /* return to userspace */
b .
- STD_EXCEPTION_PSERIES(0xd00, single_step)
- STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+ STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
+
+ /* At 0xe??? we have a bunch of hypervisor exceptions, we branch
+ * out of line to handle them
+ */
+ . = 0xe00
+ b h_data_storage_hv
+ . = 0xe20
+ b h_instr_storage_hv
+ . = 0xe40
+ b emulation_assist_hv
+ . = 0xe50
+ b hmi_exception_hv
+ . = 0xe60
+ b hmi_exception_hv
/* We need to deal with the Altivec unavailable exception
* here which is at 0xf20, thus in the middle of the
@@ -193,39 +250,42 @@
*/
performance_monitor_pSeries_1:
. = 0xf00
- DO_KVM 0xf00
b performance_monitor_pSeries
altivec_unavailable_pSeries_1:
. = 0xf20
- DO_KVM 0xf20
b altivec_unavailable_pSeries
vsx_unavailable_pSeries_1:
. = 0xf40
- DO_KVM 0xf40
b vsx_unavailable_pSeries
#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+ STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
#endif /* CONFIG_CBE_RAS */
- STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+ STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+ STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
#endif /* CONFIG_CBE_RAS */
- STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+ STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+ STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
#endif /* CONFIG_CBE_RAS */
. = 0x3000
-/*** pSeries interrupt support ***/
+/*** Out of line interrupts support ***/
+
+ /* moved from 0xe00 */
+ STD_EXCEPTION_HV(., 0xe00, h_data_storage)
+ STD_EXCEPTION_HV(., 0xe20, h_instr_storage)
+ STD_EXCEPTION_HV(., 0xe40, emulation_assist)
+ STD_EXCEPTION_HV(., 0xe60, hmi_exception) /* need to flush cache ? */
/* moved from 0xf00 */
- STD_EXCEPTION_PSERIES(., performance_monitor)
- STD_EXCEPTION_PSERIES(., altivec_unavailable)
- STD_EXCEPTION_PSERIES(., vsx_unavailable)
+ STD_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+ STD_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+ STD_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
/*
* An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -240,17 +300,30 @@
rotldi r10,r10,16
mtspr SPRN_SRR1,r10
ld r10,PACA_EXGEN+EX_R10(r13)
- mfspr r13,SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r13)
rfid
b .
+masked_Hinterrupt:
+ stb r10,PACAHARDIRQEN(r13)
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ mfspr r10,SPRN_HSRR1
+ rldicl r10,r10,48,1 /* clear MSR_EE */
+ rotldi r10,r10,16
+ mtspr SPRN_HSRR1,r10
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ GET_SCRATCH0(r13)
+ hrfid
+ b .
+
.align 7
do_stab_bolted_pSeries:
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
- EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
+ EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
#ifdef CONFIG_PPC_PSERIES
/*
@@ -260,15 +333,15 @@
.align 7
system_reset_fwnmi:
HMT_MEDIUM
- mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+ SET_SCRATCH0(r13) /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
.globl machine_check_fwnmi
.align 7
machine_check_fwnmi:
HMT_MEDIUM
- mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+ SET_SCRATCH0(r13) /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, EXC_STD)
#endif /* CONFIG_PPC_PSERIES */
@@ -282,7 +355,7 @@
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R11(r13)
std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG_SCRATCH0
+ GET_SCRATCH0(r10)
ld r11,PACA_EXSLB+EX_R9(r13)
ld r12,PACA_EXSLB+EX_R3(r13)
std r10,PACA_EXGEN+EX_R13(r13)
@@ -342,6 +415,8 @@
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
+ STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
#ifdef CONFIG_ALTIVEC
@@ -386,9 +461,24 @@
std r12,_XER(r1)
SAVE_GPR(0,r1)
SAVE_GPR(2,r1)
- SAVE_4GPRS(3,r1)
- SAVE_2GPRS(7,r1)
- SAVE_10GPRS(12,r1)
+ ld r10,EX_R3(r3)
+ std r10,GPR3(r1)
+ SAVE_GPR(4,r1)
+ SAVE_4GPRS(5,r1)
+ ld r9,EX_R9(r3)
+ ld r10,EX_R10(r3)
+ SAVE_2GPRS(9,r1)
+ ld r9,EX_R11(r3)
+ ld r10,EX_R12(r3)
+ ld r11,EX_R13(r3)
+ std r9,GPR11(r1)
+ std r10,GPR12(r1)
+ std r11,GPR13(r1)
+BEGIN_FTR_SECTION
+ ld r10,EX_CFAR(r3)
+ std r10,ORIG_GPR3(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ SAVE_8GPRS(14,r1)
SAVE_10GPRS(22,r1)
lhz r12,PACA_TRAP_SAVE(r13)
std r12,_TRAP(r1)
@@ -397,6 +487,9 @@
li r12,0
std r12,0(r11)
ld r2,PACATOC(r13)
+ ld r11,exception_marker@toc(r2)
+ std r12,RESULT(r1)
+ std r11,STACK_FRAME_OVERHEAD-16(r1)
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl .kernel_bad_stack
b 1b
@@ -419,6 +512,19 @@
li r5,0x300
b .do_hash_page /* Try to handle as hpte fault */
+ .align 7
+ .globl h_data_storage_common
+h_data_storage_common:
+ mfspr r10,SPRN_HDAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_HDSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unknown_exception
+ b .ret_from_except
+
.align 7
.globl instruction_access_common
instruction_access_common:
@@ -428,6 +534,8 @@
li r5,0x400
b .do_hash_page /* Try to handle as hpte fault */
+ STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+
/*
* Here is the common SLB miss user that is used when going to virtual
* mode for SLB misses, that is currently not used
@@ -750,7 +858,7 @@
BEGIN_FTR_SECTION
andis. r0,r4,0x0020 /* Is it a segment table fault? */
bne- do_ste_alloc /* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
clrrdi r11,r1,THREAD_SHIFT
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index c5c24be..ba250d5 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -805,19 +805,6 @@
blr
#ifdef CONFIG_SMP
-#ifdef CONFIG_GEMINI
- .globl __secondary_start_gemini
-__secondary_start_gemini:
- mfspr r4,SPRN_HID0
- ori r4,r4,HID0_ICFI
- li r3,0
- ori r3,r3,HID0_ICE
- andc r4,r4,r3
- mtspr SPRN_HID0,r4
- sync
- b __secondary_start
-#endif /* CONFIG_GEMINI */
-
.globl __secondary_start_mpc86xx
__secondary_start_mpc86xx:
mfspr r3, SPRN_PIR
@@ -890,15 +877,6 @@
mtspr SPRN_SRR1,r4
SYNC
RFI
-
-_GLOBAL(start_secondary_resume)
- /* Reset stack */
- rlwinm r1,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
- li r3,0
- std r3,0(r1) /* Zero the stack frame pointer */
- bl start_secondary
- b .
#endif /* CONFIG_SMP */
#ifdef CONFIG_KVM_BOOK3S_HANDLER
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3a319f9..ba50409 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -147,6 +147,8 @@
mtctr r4
mr r3,r24
li r4,0
+ /* Make sure that patched code is visible */
+ isync
bctr
#else
BUG_OPCODE
@@ -216,19 +218,25 @@
*/
LOAD_REG_ADDR(r13, paca) /* Load paca pointer */
ld r13,0(r13) /* Get base vaddr of paca array */
+#ifndef CONFIG_SMP
+ addi r13,r13,PACA_SIZE /* know r13 if used accidentally */
+ b .kexec_wait /* wait for next kernel if !SMP */
+#else
+ LOAD_REG_ADDR(r7, nr_cpu_ids) /* Load nr_cpu_ids address */
+ lwz r7,0(r7) /* also the max paca allocated */
li r5,0 /* logical cpu id */
1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */
cmpw r6,r24 /* Compare to our id */
beq 2f
addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */
addi r5,r5,1
- cmpwi r5,NR_CPUS
+ cmpw r5,r7 /* Check if more pacas exist */
blt 1b
mr r3,r24 /* not found, copy phys to r3 */
b .kexec_wait /* next kernel might do better */
-2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */
+2: SET_PACA(r13)
#ifdef CONFIG_PPC_BOOK3E
addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */
mtspr SPRN_SPRG_TLB_EXFRAME,r12
@@ -236,34 +244,39 @@
/* From now on, r24 is expected to be logical cpuid */
mr r24,r5
-3: HMT_LOW
- lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
- /* start. */
-
-#ifndef CONFIG_SMP
- b 3b /* Never go on non-SMP */
-#else
- cmpwi 0,r23,0
- beq 3b /* Loop until told to go */
-
- sync /* order paca.run and cur_cpu_spec */
/* See if we need to call a cpu state restore handler */
LOAD_REG_ADDR(r23, cur_cpu_spec)
ld r23,0(r23)
ld r23,CPU_SPEC_RESTORE(r23)
cmpdi 0,r23,0
- beq 4f
+ beq 3f
ld r23,0(r23)
mtctr r23
bctrl
-4: /* Create a temp kernel stack for use before relocation is on. */
+3: LOAD_REG_ADDR(r3, boot_cpu_count) /* Decrement boot_cpu_count */
+ lwarx r4,0,r3
+ subi r4,r4,1
+ stwcx. r4,0,r3
+ bne 3b
+ isync
+
+4: HMT_LOW
+ lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
+ /* start. */
+ cmpwi 0,r23,0
+ beq 4b /* Loop until told to go */
+
+ sync /* order paca.run and cur_cpu_spec */
+ isync /* In case code patching happened */
+
+ /* Create a temp kernel stack for use before relocation is on. */
ld r1,PACAEMERGSP(r13)
subi r1,r1,STACK_FRAME_OVERHEAD
b __secondary_start
-#endif
+#endif /* SMP */
/*
* Turn the MMU off.
@@ -534,7 +547,7 @@
ld r4,0(r4) /* Get base vaddr of paca array */
mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
add r13,r13,r4 /* for this processor. */
- mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/
+ SET_PACA(r13) /* Save vaddr of paca in an SPRG*/
/* Mark interrupts soft and hard disabled (they might be enabled
* in the PACA when doing hotplug)
@@ -645,7 +658,7 @@
oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */
mtmsr r11
#else /* CONFIG_PPC_BOOK3E */
- li r12,(MSR_SF | MSR_ISF)@highest
+ li r12,(MSR_64BIT | MSR_ISF)@highest
sldi r12,r12,48
or r11,r11,r12
mtmsrd r11
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
new file mode 100644
index 0000000..f8f0bc7
--- /dev/null
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -0,0 +1,97 @@
+/*
+ * This file contains the power_save function for 970-family CPUs.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/ppc-opcode.h>
+
+#undef DEBUG
+
+ .text
+
+_GLOBAL(power7_idle)
+ /* Now check if user or arch enabled NAP mode */
+ LOAD_REG_ADDRBASE(r3,powersave_nap)
+ lwz r4,ADDROFF(powersave_nap)(r3)
+ cmpwi 0,r4,0
+ beqlr
+
+ /* NAP is a state loss, we create a regs frame on the
+ * stack, fill it up with the state we care about and
+ * stick a pointer to it in PACAR1. We really only
+ * need to save PC, some CR bits and the NV GPRs,
+ * but for now an interrupt frame will do.
+ */
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-INT_FRAME_SIZE(r1)
+ std r0,_LINK(r1)
+ std r0,_NIP(r1)
+
+#ifndef CONFIG_SMP
+ /* Make sure FPU, VSX etc... are flushed as we may lose
+ * state when going to nap mode
+ */
+ bl .discard_lazy_cpu_state
+#endif /* CONFIG_SMP */
+
+ /* Hard disable interrupts */
+ mfmsr r9
+ rldicl r9,r9,48,1
+ rotldi r9,r9,16
+ mtmsrd r9,1 /* hard-disable interrupts */
+ li r0,0
+ stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */
+ stb r0,PACAHARDIRQEN(r13)
+
+ /* Continue saving state */
+ SAVE_GPR(2, r1)
+ SAVE_NVGPRS(r1)
+ mfcr r3
+ std r3,_CCR(r1)
+ std r9,_MSR(r1)
+ std r1,PACAR1(r13)
+
+ /* Magic NAP mode enter sequence */
+ std r0,0(r1)
+ ptesync
+ ld r0,0(r1)
+1: cmp cr0,r0,r0
+ bne 1b
+ PPC_NAP
+ b .
+
+_GLOBAL(power7_wakeup_loss)
+ GET_PACA(r13)
+ ld r1,PACAR1(r13)
+ REST_NVGPRS(r1)
+ REST_GPR(2, r1)
+ ld r3,_CCR(r1)
+ ld r4,_MSR(r1)
+ ld r5,_NIP(r1)
+ addi r1,r1,INT_FRAME_SIZE
+ mtcr r3
+ mtspr SPRN_SRR1,r4
+ mtspr SPRN_SRR0,r5
+ rfid
+
+_GLOBAL(power7_wakeup_noloss)
+ GET_PACA(r13)
+ ld r1,PACAR1(r13)
+ ld r4,_MSR(r1)
+ ld r5,_NIP(r1)
+ addi r1,r1,INT_FRAME_SIZE
+ mtspr SPRN_SRR1,r4
+ mtspr SPRN_SRR0,r5
+ rfid
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c
similarity index 94%
rename from arch/powerpc/platforms/cell/io-workarounds.c
rename to arch/powerpc/kernel/io-workarounds.c
index 5c1118e..ffafaea 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/kernel/io-workarounds.c
@@ -17,8 +17,7 @@
#include <asm/machdep.h>
#include <asm/pgtable.h>
#include <asm/ppc-pci.h>
-
-#include "io-workarounds.h"
+#include <asm/io-workarounds.h>
#define IOWA_MAX_BUS 8
@@ -145,7 +144,19 @@
return res;
}
-/* Regist new bus to support workaround */
+/* Enable IO workaround */
+static void __devinit io_workaround_init(void)
+{
+ static int io_workaround_inited;
+
+ if (io_workaround_inited)
+ return;
+ ppc_pci_io = iowa_pci_io;
+ ppc_md.ioremap = iowa_ioremap;
+ io_workaround_inited = 1;
+}
+
+/* Register new bus to support workaround */
void __devinit iowa_register_bus(struct pci_controller *phb,
struct ppc_pci_io *ops,
int (*initfunc)(struct iowa_bus *, void *), void *data)
@@ -153,6 +164,8 @@
struct iowa_bus *bus;
struct device_node *np = phb->dn;
+ io_workaround_init();
+
if (iowa_bus_count >= IOWA_MAX_BUS) {
pr_err("IOWA:Too many pci bridges, "
"workarounds disabled for %s\n", np->full_name);
@@ -162,6 +175,7 @@
bus = &iowa_busses[iowa_bus_count];
bus->phb = phb;
bus->ops = ops;
+ bus->private = data;
if (initfunc)
if ((*initfunc)(bus, data))
@@ -172,14 +186,3 @@
pr_debug("IOWA:[%d]Add bus, %s.\n", iowa_bus_count-1, np->full_name);
}
-/* enable IO workaround */
-void __devinit io_workaround_init(void)
-{
- static int io_workaround_inited;
-
- if (io_workaround_inited)
- return;
- ppc_pci_io = iowa_pci_io;
- ppc_md.ioremap = iowa_ioremap;
- io_workaround_inited = 1;
-}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index f621b7d..a24d37d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -66,7 +66,6 @@
#include <asm/ptrace.h>
#include <asm/machdep.h>
#include <asm/udbg.h>
-#include <asm/dbell.h>
#include <asm/smp.h>
#ifdef CONFIG_PPC64
@@ -160,7 +159,8 @@
#if defined(CONFIG_BOOKE) && defined(CONFIG_SMP)
/* Check for pending doorbell interrupts and resend to ourself */
- doorbell_check_self();
+ if (cpu_has_feature(CPU_FTR_DBELL))
+ smp_muxed_ipi_resend();
#endif
/*
@@ -397,24 +397,28 @@
void exc_lvl_ctx_init(void)
{
struct thread_info *tp;
- int i, hw_cpu;
+ int i, cpu_nr;
for_each_possible_cpu(i) {
- hw_cpu = get_hard_smp_processor_id(i);
- memset((void *)critirq_ctx[hw_cpu], 0, THREAD_SIZE);
- tp = critirq_ctx[hw_cpu];
- tp->cpu = i;
+#ifdef CONFIG_PPC64
+ cpu_nr = i;
+#else
+ cpu_nr = get_hard_smp_processor_id(i);
+#endif
+ memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
+ tp = critirq_ctx[cpu_nr];
+ tp->cpu = cpu_nr;
tp->preempt_count = 0;
#ifdef CONFIG_BOOKE
- memset((void *)dbgirq_ctx[hw_cpu], 0, THREAD_SIZE);
- tp = dbgirq_ctx[hw_cpu];
- tp->cpu = i;
+ memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE);
+ tp = dbgirq_ctx[cpu_nr];
+ tp->cpu = cpu_nr;
tp->preempt_count = 0;
- memset((void *)mcheckirq_ctx[hw_cpu], 0, THREAD_SIZE);
- tp = mcheckirq_ctx[hw_cpu];
- tp->cpu = i;
+ memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE);
+ tp = mcheckirq_ctx[cpu_nr];
+ tp->cpu = cpu_nr;
tp->preempt_count = HARDIRQ_OFFSET;
#endif
}
@@ -477,20 +481,41 @@
* IRQ controller and virtual interrupts
*/
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+ irq_hw_number_t hwirq;
+ struct irq_host *host;
+};
+
static LIST_HEAD(irq_hosts);
static DEFINE_RAW_SPINLOCK(irq_big_lock);
-static unsigned int revmap_trees_allocated;
static DEFINE_MUTEX(revmap_trees_mutex);
-struct irq_map_entry irq_map[NR_IRQS];
+static struct irq_map_entry irq_map[NR_IRQS];
static unsigned int irq_virq_count = NR_IRQS;
static struct irq_host *irq_default_host;
+irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
+{
+ return irq_map[d->irq].hwirq;
+}
+EXPORT_SYMBOL_GPL(irqd_to_hwirq);
+
irq_hw_number_t virq_to_hw(unsigned int virq)
{
return irq_map[virq].hwirq;
}
EXPORT_SYMBOL_GPL(virq_to_hw);
+bool virq_is_host(unsigned int virq, struct irq_host *host)
+{
+ return irq_map[virq].host == host;
+}
+EXPORT_SYMBOL_GPL(virq_is_host);
+
static int default_irq_host_match(struct irq_host *h, struct device_node *np)
{
return h->of_node != NULL && h->of_node == np;
@@ -511,7 +536,7 @@
/* Allocate structure and revmap table if using linear mapping */
if (revmap_type == IRQ_HOST_MAP_LINEAR)
size += revmap_arg * sizeof(unsigned int);
- host = zalloc_maybe_bootmem(size, GFP_KERNEL);
+ host = kzalloc(size, GFP_KERNEL);
if (host == NULL)
return NULL;
@@ -561,14 +586,14 @@
irq_map[i].host = host;
smp_wmb();
- /* Clear norequest flags */
- irq_clear_status_flags(i, IRQ_NOREQUEST);
-
/* Legacy flags are left to default at this point,
* one can then use irq_create_mapping() to
* explicitly change them
*/
ops->map(host, i, i);
+
+ /* Clear norequest flags */
+ irq_clear_status_flags(i, IRQ_NOREQUEST);
}
break;
case IRQ_HOST_MAP_LINEAR:
@@ -579,6 +604,9 @@
smp_wmb();
host->revmap_data.linear.revmap = rmap;
break;
+ case IRQ_HOST_MAP_TREE:
+ INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
+ break;
default:
break;
}
@@ -636,8 +664,6 @@
goto error;
}
- irq_clear_status_flags(virq, IRQ_NOREQUEST);
-
/* map it */
smp_wmb();
irq_map[virq].hwirq = hwirq;
@@ -648,6 +674,8 @@
goto errdesc;
}
+ irq_clear_status_flags(virq, IRQ_NOREQUEST);
+
return 0;
errdesc:
@@ -704,8 +732,6 @@
*/
virq = irq_find_mapping(host, hwirq);
if (virq != NO_IRQ) {
- if (host->ops->remap)
- host->ops->remap(host, virq, hwirq);
pr_debug("irq: -> existing mapping on virq %d\n", virq);
return virq;
}
@@ -786,14 +812,15 @@
return;
host = irq_map[virq].host;
- WARN_ON (host == NULL);
- if (host == NULL)
+ if (WARN_ON(host == NULL))
return;
/* Never unmap legacy interrupts */
if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
return;
+ irq_set_status_flags(virq, IRQ_NOREQUEST);
+
/* remove chip and handler */
irq_set_chip_and_handler(virq, NULL, NULL);
@@ -813,13 +840,6 @@
host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
break;
case IRQ_HOST_MAP_TREE:
- /*
- * Check if radix tree allocated yet, if not then nothing to
- * remove.
- */
- smp_rmb();
- if (revmap_trees_allocated < 1)
- break;
mutex_lock(&revmap_trees_mutex);
radix_tree_delete(&host->revmap_data.tree, hwirq);
mutex_unlock(&revmap_trees_mutex);
@@ -830,8 +850,6 @@
smp_mb();
irq_map[virq].hwirq = host->inval_irq;
- irq_set_status_flags(virq, IRQ_NOREQUEST);
-
irq_free_descs(virq, 1);
/* Free it */
irq_free_virt(virq, 1);
@@ -877,16 +895,9 @@
struct irq_map_entry *ptr;
unsigned int virq;
- WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
-
- /*
- * Check if the radix tree exists and has bee initialized.
- * If not, we fallback to slow mode
- */
- if (revmap_trees_allocated < 2)
+ if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_TREE))
return irq_find_mapping(host, hwirq);
- /* Now try to resolve */
/*
* No rcu_read_lock(ing) needed, the ptr returned can't go under us
* as it's referencing an entry in the static irq_map table.
@@ -909,16 +920,7 @@
void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
irq_hw_number_t hwirq)
{
-
- WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
-
- /*
- * Check if the radix tree exists yet.
- * If not, then the irq will be inserted into the tree when it gets
- * initialized.
- */
- smp_rmb();
- if (revmap_trees_allocated < 1)
+ if (WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE))
return;
if (virq != NO_IRQ) {
@@ -934,7 +936,8 @@
{
unsigned int *revmap;
- WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR);
+ if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_LINEAR))
+ return irq_find_mapping(host, hwirq);
/* Check revmap bounds */
if (unlikely(hwirq >= host->revmap_data.linear.size))
@@ -1028,53 +1031,6 @@
return 0;
}
-/* We need to create the radix trees late */
-static int irq_late_init(void)
-{
- struct irq_host *h;
- unsigned int i;
-
- /*
- * No mutual exclusion with respect to accessors of the tree is needed
- * here as the synchronization is done via the state variable
- * revmap_trees_allocated.
- */
- list_for_each_entry(h, &irq_hosts, link) {
- if (h->revmap_type == IRQ_HOST_MAP_TREE)
- INIT_RADIX_TREE(&h->revmap_data.tree, GFP_KERNEL);
- }
-
- /*
- * Make sure the radix trees inits are visible before setting
- * the flag
- */
- smp_wmb();
- revmap_trees_allocated = 1;
-
- /*
- * Insert the reverse mapping for those interrupts already present
- * in irq_map[].
- */
- mutex_lock(&revmap_trees_mutex);
- for (i = 0; i < irq_virq_count; i++) {
- if (irq_map[i].host &&
- (irq_map[i].host->revmap_type == IRQ_HOST_MAP_TREE))
- radix_tree_insert(&irq_map[i].host->revmap_data.tree,
- irq_map[i].hwirq, &irq_map[i]);
- }
- mutex_unlock(&revmap_trees_mutex);
-
- /*
- * Make sure the radix trees insertions are visible before setting
- * the flag
- */
- smp_wmb();
- revmap_trees_allocated = 2;
-
- return 0;
-}
-arch_initcall(irq_late_init);
-
#ifdef CONFIG_VIRQ_DEBUG
static int virq_debug_show(struct seq_file *m, void *private)
{
@@ -1082,10 +1038,11 @@
struct irq_desc *desc;
const char *p;
static const char none[] = "none";
+ void *data;
int i;
- seq_printf(m, "%-5s %-7s %-15s %s\n", "virq", "hwirq",
- "chip name", "host name");
+ seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
+ "chip name", "chip data", "host name");
for (i = 1; i < nr_irqs; i++) {
desc = irq_to_desc(i);
@@ -1098,7 +1055,7 @@
struct irq_chip *chip;
seq_printf(m, "%5d ", i);
- seq_printf(m, "0x%05lx ", virq_to_hw(i));
+ seq_printf(m, "0x%05lx ", irq_map[i].hwirq);
chip = irq_desc_get_chip(desc);
if (chip && chip->name)
@@ -1107,6 +1064,9 @@
p = none;
seq_printf(m, "%-15s ", p);
+ data = irq_desc_get_chip_data(desc);
+ seq_printf(m, "0x%16p ", data);
+
if (irq_map[i].host && irq_map[i].host->of_node)
p = irq_map[i].host->of_node->full_name;
else
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 42850ee..bd9d35f 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -109,7 +109,7 @@
#ifdef CONFIG_SMP
void kgdb_roundup_cpus(unsigned long flags)
{
- smp_send_debugger_break(MSG_ALL_BUT_SELF);
+ smp_send_debugger_break();
}
#endif
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 301db65..84daabe 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -132,34 +132,6 @@
/*
* Methods used to fetch LPAR data when running on a pSeries platform.
*/
-/**
- * h_get_mpp
- * H_GET_MPP hcall returns info in 7 parms
- */
-int h_get_mpp(struct hvcall_mpp_data *mpp_data)
-{
- int rc;
- unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
-
- rc = plpar_hcall9(H_GET_MPP, retbuf);
-
- mpp_data->entitled_mem = retbuf[0];
- mpp_data->mapped_mem = retbuf[1];
-
- mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
- mpp_data->pool_num = retbuf[2] & 0xffff;
-
- mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
- mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
- mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
-
- mpp_data->pool_size = retbuf[4];
- mpp_data->loan_request = retbuf[5];
- mpp_data->backing_mem = retbuf[6];
-
- return rc;
-}
-EXPORT_SYMBOL(h_get_mpp);
struct hvcall_ppp_data {
u64 entitlement;
@@ -345,6 +317,30 @@
seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
}
+/**
+ * parse_mpp_x_data
+ * Parse out data returned from h_get_mpp_x
+ */
+static void parse_mpp_x_data(struct seq_file *m)
+{
+ struct hvcall_mpp_x_data mpp_x_data;
+
+ if (!firmware_has_feature(FW_FEATURE_XCMO))
+ return;
+ if (h_get_mpp_x(&mpp_x_data))
+ return;
+
+ seq_printf(m, "coalesced_bytes=%ld\n", mpp_x_data.coalesced_bytes);
+
+ if (mpp_x_data.pool_coalesced_bytes)
+ seq_printf(m, "pool_coalesced_bytes=%ld\n",
+ mpp_x_data.pool_coalesced_bytes);
+ if (mpp_x_data.pool_purr_cycles)
+ seq_printf(m, "coalesce_pool_purr=%ld\n", mpp_x_data.pool_purr_cycles);
+ if (mpp_x_data.pool_spurr_cycles)
+ seq_printf(m, "coalesce_pool_spurr=%ld\n", mpp_x_data.pool_spurr_cycles);
+}
+
#define SPLPAR_CHARACTERISTICS_TOKEN 20
#define SPLPAR_MAXLENGTH 1026*(sizeof(char))
@@ -520,6 +516,7 @@
parse_system_parameter_string(m);
parse_ppp_data(m);
parse_mpp_data(m);
+ parse_mpp_x_data(m);
pseries_cmo_data(m);
splpar_dispatch_data(m);
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 094bd98..998a100 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -694,6 +694,17 @@
addi r1,r1,16
blr
+#ifdef CONFIG_SMP
+_GLOBAL(start_secondary_resume)
+ /* Reset stack */
+ rlwinm r1,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r3,0
+ stw r3,0(r1) /* Zero the stack frame pointer */
+ bl start_secondary
+ b .
+#endif /* CONFIG_SMP */
+
/*
* This routine is just here to keep GCC happy - sigh...
*/
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 206a321..e89df59 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -462,7 +462,8 @@
* wait for the flag to change, indicating this kernel is going away but
* the slave code for the next one is at addresses 0 to 100.
*
- * This is used by all slaves.
+ * This is used by all slaves, even those that did not find a matching
+ * paca in the secondary startup code.
*
* Physical (hardware) cpu id should be in r3.
*/
@@ -471,10 +472,6 @@
1: mflr r5
addi r5,r5,kexec_flag-1b
- li r4,KEXEC_STATE_REAL_MODE
- stb r4,PACAKEXECSTATE(r13)
- SYNC
-
99: HMT_LOW
#ifdef CONFIG_KEXEC /* use no memory without kexec */
lwz r4,0(r5)
@@ -499,11 +496,17 @@
*
* get phys id from paca
* switch to real mode
+ * mark the paca as no longer used
* join other cpus in kexec_wait(phys_id)
*/
_GLOBAL(kexec_smp_wait)
lhz r3,PACAHWCPUID(r13)
bl real_mode
+
+ li r4,KEXEC_STATE_REAL_MODE
+ stb r4,PACAKEXECSTATE(r13)
+ SYNC
+
b .kexec_wait
/*
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 10f0aad..efeb881 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -7,7 +7,7 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/threads.h>
+#include <linux/smp.h>
#include <linux/module.h>
#include <linux/memblock.h>
@@ -156,18 +156,29 @@
/* Put the paca pointer into r13 and SPRG_PACA */
void setup_paca(struct paca_struct *new_paca)
{
+ /* Setup r13 */
local_paca = new_paca;
- mtspr(SPRN_SPRG_PACA, local_paca);
+
#ifdef CONFIG_PPC_BOOK3E
+ /* On Book3E, initialize the TLB miss exception frames */
mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#else
+ /* In HV mode, we setup both HPACA and PACA to avoid problems
+ * if we do a GET_PACA() before the feature fixups have been
+ * applied
+ */
+ if (cpu_has_feature(CPU_FTR_HVMODE_206))
+ mtspr(SPRN_SPRG_HPACA, local_paca);
#endif
+ mtspr(SPRN_SPRG_PACA, local_paca);
+
}
static int __initdata paca_size;
void __init allocate_pacas(void)
{
- int nr_cpus, cpu, limit;
+ int cpu, limit;
/*
* We can't take SLB misses on the paca, and we want to access them
@@ -179,23 +190,18 @@
if (firmware_has_feature(FW_FEATURE_ISERIES))
limit = min(limit, HvPagesToMap * HVPAGESIZE);
- nr_cpus = NR_CPUS;
- /* On iSeries we know we can never have more than 64 cpus */
- if (firmware_has_feature(FW_FEATURE_ISERIES))
- nr_cpus = min(64, nr_cpus);
-
- paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
+ paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
memset(paca, 0, paca_size);
printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
- paca_size, nr_cpus, paca);
+ paca_size, nr_cpu_ids, paca);
- allocate_lppacas(nr_cpus, limit);
+ allocate_lppacas(nr_cpu_ids, limit);
/* Can't use for_each_*_cpu, as they aren't functional yet */
- for (cpu = 0; cpu < nr_cpus; cpu++)
+ for (cpu = 0; cpu < nr_cpu_ids; cpu++)
initialise_paca(&paca[cpu], cpu);
}
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d225d99..6baabc1 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -43,10 +43,9 @@
const u32 *regs;
struct pci_dn *pdn;
- pdn = alloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+ pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
if (pdn == NULL)
return NULL;
- memset(pdn, 0, sizeof(*pdn));
dn->data = pdn;
pdn->node = dn;
pdn->phb = phb;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index ef3ef56..7d28f54 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -54,7 +54,6 @@
extern int sys_sigreturn(struct pt_regs *regs);
EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
@@ -88,9 +87,7 @@
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(copy_4K_page);
-#endif
+EXPORT_SYMBOL(copy_page);
#if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
EXPORT_SYMBOL(isa_io_base);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index f74f355..095043d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -702,6 +702,8 @@
/*
* Copy a thread..
*/
+extern unsigned long dscr_default; /* defined in arch/powerpc/kernel/sysfs.c */
+
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused, struct task_struct *p,
struct pt_regs *regs)
@@ -755,11 +757,11 @@
_ALIGN_UP(sizeof(struct thread_info), 16);
#ifdef CONFIG_PPC_STD_MMU_64
- if (cpu_has_feature(CPU_FTR_SLB)) {
+ if (mmu_has_feature(MMU_FTR_SLB)) {
unsigned long sp_vsid;
unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
- if (cpu_has_feature(CPU_FTR_1T_SEGMENT))
+ if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T)
<< SLB_VSID_SHIFT_1T;
else
@@ -769,6 +771,20 @@
p->thread.ksp_vsid = sp_vsid;
}
#endif /* CONFIG_PPC_STD_MMU_64 */
+#ifdef CONFIG_PPC64
+ if (cpu_has_feature(CPU_FTR_DSCR)) {
+ if (current->thread.dscr_inherit) {
+ p->thread.dscr_inherit = 1;
+ p->thread.dscr = current->thread.dscr;
+ } else if (0 != dscr_default) {
+ p->thread.dscr_inherit = 1;
+ p->thread.dscr = dscr_default;
+ } else {
+ p->thread.dscr_inherit = 0;
+ p->thread.dscr = 0;
+ }
+ }
+#endif
/*
* The PPC64 ABI makes use of a TOC to contain function
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index e74fa12..48aeb55 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -68,6 +68,7 @@
unsigned long tce_alloc_start, tce_alloc_end;
u64 ppc64_rma_size;
#endif
+static phys_addr_t first_memblock_size;
static int __init early_parse_mem(char *p)
{
@@ -123,18 +124,19 @@
*/
static struct ibm_pa_feature {
unsigned long cpu_features; /* CPU_FTR_xxx bit */
+ unsigned long mmu_features; /* MMU_FTR_xxx bit */
unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
unsigned char pabyte; /* byte number in ibm,pa-features */
unsigned char pabit; /* bit number (big-endian) */
unsigned char invert; /* if 1, pa bit set => clear feature */
} ibm_pa_features[] __initdata = {
- {0, PPC_FEATURE_HAS_MMU, 0, 0, 0},
- {0, PPC_FEATURE_HAS_FPU, 0, 1, 0},
- {CPU_FTR_SLB, 0, 0, 2, 0},
- {CPU_FTR_CTRL, 0, 0, 3, 0},
- {CPU_FTR_NOEXECUTE, 0, 0, 6, 0},
- {CPU_FTR_NODSISRALIGN, 0, 1, 1, 1},
- {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
+ {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0},
+ {0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0},
+ {0, MMU_FTR_SLB, 0, 0, 2, 0},
+ {CPU_FTR_CTRL, 0, 0, 0, 3, 0},
+ {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0},
+ {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1},
+ {0, MMU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
{CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
};
@@ -166,9 +168,11 @@
if (bit ^ fp->invert) {
cur_cpu_spec->cpu_features |= fp->cpu_features;
cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+ cur_cpu_spec->mmu_features |= fp->mmu_features;
} else {
cur_cpu_spec->cpu_features &= ~fp->cpu_features;
cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+ cur_cpu_spec->mmu_features &= ~fp->mmu_features;
}
}
}
@@ -268,13 +272,13 @@
const char *uname, int depth,
void *data)
{
- static int logical_cpuid = 0;
char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const u32 *prop;
const u32 *intserv;
int i, nthreads;
unsigned long len;
- int found = 0;
+ int found = -1;
+ int found_thread = 0;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
@@ -298,11 +302,10 @@
* version 2 of the kexec param format adds the phys cpuid of
* booted proc.
*/
- if (initial_boot_params && initial_boot_params->version >= 2) {
- if (intserv[i] ==
- initial_boot_params->boot_cpuid_phys) {
- found = 1;
- break;
+ if (initial_boot_params->version >= 2) {
+ if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
+ found = boot_cpu_count;
+ found_thread = i;
}
} else {
/*
@@ -311,23 +314,20 @@
* off secondary threads.
*/
if (of_get_flat_dt_prop(node,
- "linux,boot-cpu", NULL) != NULL) {
- found = 1;
- break;
- }
+ "linux,boot-cpu", NULL) != NULL)
+ found = boot_cpu_count;
}
-
#ifdef CONFIG_SMP
/* logical cpu id is always 0 on UP kernels */
- logical_cpuid++;
+ boot_cpu_count++;
#endif
}
- if (found) {
- DBG("boot cpu: logical %d physical %d\n", logical_cpuid,
- intserv[i]);
- boot_cpuid = logical_cpuid;
- set_hard_smp_processor_id(boot_cpuid, intserv[i]);
+ if (found >= 0) {
+ DBG("boot cpu: logical %d physical %d\n", found,
+ intserv[found_thread]);
+ boot_cpuid = found;
+ set_hard_smp_processor_id(found, intserv[found_thread]);
/*
* PAPR defines "logical" PVR values for cpus that
@@ -509,11 +509,14 @@
size = 0x80000000ul - base;
}
#endif
-
- /* First MEMBLOCK added, do some special initializations */
- if (memstart_addr == ~(phys_addr_t)0)
- setup_initial_memory_limit(base, size);
- memstart_addr = min((u64)memstart_addr, base);
+ /* Keep track of the beginning of memory -and- the size of
+ * the very first block in the device-tree as it represents
+ * the RMA on ppc64 server
+ */
+ if (base < memstart_addr) {
+ memstart_addr = base;
+ first_memblock_size = size;
+ }
/* Add the chunk to the MEMBLOCK list */
memblock_add(base, size);
@@ -698,6 +701,7 @@
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
+ setup_initial_memory_limit(memstart_addr, first_memblock_size);
/* Save command line for /proc/cmdline and then parse parameters */
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 941ff4d..c016033 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -335,6 +335,7 @@
const char *p, *q, *s;
va_list args;
unsigned long v;
+ long vs;
struct prom_t *_prom = &RELOC(prom);
va_start(args, format);
@@ -368,12 +369,35 @@
v = va_arg(args, unsigned long);
prom_print_hex(v);
break;
+ case 'd':
+ ++q;
+ vs = va_arg(args, int);
+ if (vs < 0) {
+ prom_print(RELOC("-"));
+ vs = -vs;
+ }
+ prom_print_dec(vs);
+ break;
case 'l':
++q;
- if (*q == 'u') { /* '%lu' */
+ if (*q == 0)
+ break;
+ else if (*q == 'x') {
+ ++q;
+ v = va_arg(args, unsigned long);
+ prom_print_hex(v);
+ } else if (*q == 'u') { /* '%lu' */
++q;
v = va_arg(args, unsigned long);
prom_print_dec(v);
+ } else if (*q == 'd') { /* %ld */
+ ++q;
+ vs = va_arg(args, long);
+ if (vs < 0) {
+ prom_print(RELOC("-"));
+ vs = -vs;
+ }
+ prom_print_dec(vs);
}
break;
}
@@ -676,8 +700,10 @@
#endif /* CONFIG_PCI_MSI */
#ifdef CONFIG_PPC_SMLPAR
#define OV5_CMO 0x80 /* Cooperative Memory Overcommitment */
+#define OV5_XCMO 0x40 /* Page Coalescing */
#else
#define OV5_CMO 0x00
+#define OV5_XCMO 0x00
#endif
#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */
@@ -732,7 +758,7 @@
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
0,
- OV5_CMO,
+ OV5_CMO | OV5_XCMO,
OV5_TYPE1_AFFINITY,
0,
0,
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 55613e3..a6ae1cf 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -933,12 +933,16 @@
if (data && !(data & DABR_TRANSLATION))
return -EIO;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(task) < 0)
+ return -ESRCH;
+
bp = thread->ptrace_bps[0];
if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
if (bp) {
unregister_hw_breakpoint(bp);
thread->ptrace_bps[0] = NULL;
}
+ ptrace_put_breakpoints(task);
return 0;
}
if (bp) {
@@ -948,9 +952,12 @@
(DABR_DATA_WRITE | DABR_DATA_READ),
&attr.bp_type);
ret = modify_user_hw_breakpoint(bp, &attr);
- if (ret)
+ if (ret) {
+ ptrace_put_breakpoints(task);
return ret;
+ }
thread->ptrace_bps[0] = bp;
+ ptrace_put_breakpoints(task);
thread->dabr = data;
return 0;
}
@@ -965,9 +972,12 @@
ptrace_triggered, task);
if (IS_ERR(bp)) {
thread->ptrace_bps[0] = NULL;
+ ptrace_put_breakpoints(task);
return PTR_ERR(bp);
}
+ ptrace_put_breakpoints(task);
+
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
/* Move contents to the DABR register */
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 2097f2b..271ff63 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -42,6 +42,7 @@
#include <asm/time.h>
#include <asm/mmu.h>
#include <asm/topology.h>
+#include <asm/pSeries_reconfig.h>
struct rtas_t rtas = {
.lock = __ARCH_SPIN_LOCK_UNLOCKED
@@ -494,7 +495,7 @@
might_sleep();
ms = rtas_busy_delay_time(status);
- if (ms)
+ if (ms && need_resched())
msleep(ms);
return ms;
@@ -731,6 +732,7 @@
atomic_set(&data->error, rc);
start_topology_update();
+ pSeries_coalesce_init();
if (wake_when_done) {
atomic_set(&data->done, 1);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 21f30cb..79fca26 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -381,7 +381,7 @@
int i;
threads_per_core = tpc;
- threads_core_mask = CPU_MASK_NONE;
+ cpumask_clear(&threads_core_mask);
/* This implementation only supports power of 2 number of threads
* for simplicity and performance
@@ -390,7 +390,7 @@
BUG_ON(tpc != (1 << threads_shift));
for (i = 0; i < tpc; i++)
- cpu_set(i, threads_core_mask);
+ cpumask_set_cpu(i, &threads_core_mask);
printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
tpc, tpc > 1 ? "s" : "");
@@ -404,7 +404,7 @@
* cpu_present_mask
*
* Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
+ * of things like irqstacks to nr_cpu_ids rather than NR_CPUS.
*
* We do not initialize the online map here; cpus set their own bits in
* cpu_online_mask as they come up.
@@ -424,7 +424,7 @@
DBG("smp_setup_cpu_maps()\n");
- while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
+ while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < nr_cpu_ids) {
const int *intserv;
int j, len;
@@ -443,7 +443,7 @@
intserv = &cpu; /* assume logical == phys */
}
- for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+ for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
DBG(" thread %d -> cpu %d (hard id %d)\n",
j, cpu, intserv[j]);
set_cpu_present(cpu, true);
@@ -483,12 +483,12 @@
if (cpu_has_feature(CPU_FTR_SMT))
maxcpus *= nthreads;
- if (maxcpus > NR_CPUS) {
+ if (maxcpus > nr_cpu_ids) {
printk(KERN_WARNING
"Partition configured for %d cpus, "
"operating system maximum is %d.\n",
- maxcpus, NR_CPUS);
- maxcpus = NR_CPUS;
+ maxcpus, nr_cpu_ids);
+ maxcpus = nr_cpu_ids;
} else
printk(KERN_INFO "Partition configured for %d cpus.\n",
maxcpus);
@@ -510,7 +510,7 @@
cpu_init_thread_core_maps(nthreads);
/* Now that possible cpus are set, set nr_cpu_ids for later use */
- nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1;
+ setup_nr_cpu_ids();
free_unused_pacas();
}
@@ -602,6 +602,10 @@
* name instead */
if (!np)
np = of_find_node_by_name(NULL, "8042");
+ if (np) {
+ of_i8042_kbd_irq = 1;
+ of_i8042_aux_irq = 12;
+ }
break;
case FDC_BASE: /* FDC1 */
np = of_find_node_by_type(NULL, "fdc");
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d2fbc9..620d792 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -48,6 +48,7 @@
int boot_cpuid = -1;
EXPORT_SYMBOL_GPL(boot_cpuid);
+int __initdata boot_cpu_count;
int boot_cpuid_phys;
int smp_hw_index[NR_CPUS];
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 5a0401f..a88bf27 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -62,6 +62,7 @@
#include <asm/udbg.h>
#include <asm/kexec.h>
#include <asm/mmu_context.h>
+#include <asm/code-patching.h>
#include "setup.h"
@@ -72,6 +73,7 @@
#endif
int boot_cpuid = 0;
+int __initdata boot_cpu_count;
u64 ppc64_pft_size;
/* Pick defaults since we might want to patch instructions
@@ -233,6 +235,7 @@
void smp_release_cpus(void)
{
unsigned long *ptr;
+ int i;
DBG(" -> smp_release_cpus()\n");
@@ -245,7 +248,16 @@
ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
- PHYSICAL_START);
*ptr = __pa(generic_secondary_smp_init);
- mb();
+
+ /* And wait a bit for them to catch up */
+ for (i = 0; i < 100000; i++) {
+ mb();
+ HMT_low();
+ if (boot_cpu_count == 0)
+ break;
+ udelay(1);
+ }
+ DBG("boot_cpu_count = %d\n", boot_cpu_count);
DBG(" <- smp_release_cpus()\n");
}
@@ -423,17 +435,30 @@
DBG(" <- setup_system()\n");
}
-static u64 slb0_limit(void)
+/* This returns the limit below which memory accesses to the linear
+ * mapping are guarnateed not to cause a TLB or SLB miss. This is
+ * used to allocate interrupt or emergency stacks for which our
+ * exception entry path doesn't deal with being interrupted.
+ */
+static u64 safe_stack_limit(void)
{
- if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
+#ifdef CONFIG_PPC_BOOK3E
+ /* Freescale BookE bolts the entire linear mapping */
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
+ return linear_map_top;
+ /* Other BookE, we assume the first GB is bolted */
+ return 1ul << 30;
+#else
+ /* BookS, the first segment is bolted */
+ if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
return 1UL << SID_SHIFT_1T;
- }
return 1UL << SID_SHIFT;
+#endif
}
static void __init irqstack_early_init(void)
{
- u64 limit = slb0_limit();
+ u64 limit = safe_stack_limit();
unsigned int i;
/*
@@ -453,6 +478,9 @@
#ifdef CONFIG_PPC_BOOK3E
static void __init exc_lvl_early_init(void)
{
+ extern unsigned int interrupt_base_book3e;
+ extern unsigned int exc_debug_debug_book3e;
+
unsigned int i;
for_each_possible_cpu(i) {
@@ -463,6 +491,10 @@
mcheckirq_ctx[i] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
}
+
+ if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC))
+ patch_branch(&interrupt_base_book3e + (0x040 / 4) + 1,
+ (unsigned long)&exc_debug_debug_book3e, 0);
}
#else
#define exc_lvl_early_init()
@@ -486,7 +518,7 @@
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
- limit = min(slb0_limit(), ppc64_rma_size);
+ limit = min(safe_stack_limit(), ppc64_rma_size);
for_each_possible_cpu(i) {
unsigned long sp;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 27c4a45..da989ff 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -381,7 +381,7 @@
regs, uc, &uc->uc_mcontext);
#endif
if (show_unhandled_signals && printk_ratelimit())
- printk(regs->msr & MSR_SF ? fmt64 : fmt32,
+ printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
current->comm, current->pid, "rt_sigreturn",
(long)uc, regs->nip, regs->link);
@@ -469,7 +469,7 @@
regs, frame, newsp);
#endif
if (show_unhandled_signals && printk_ratelimit())
- printk(regs->msr & MSR_SF ? fmt64 : fmt32,
+ printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
current->comm, current->pid, "setup_rt_frame",
(long)frame, regs->nip, regs->link);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index cbdbb14..4a6f2ec 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -95,7 +95,7 @@
static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
#ifdef CONFIG_PPC64
-void __devinit smp_generic_kick_cpu(int nr)
+int __devinit smp_generic_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -106,38 +106,11 @@
*/
paca[nr].cpu_start = 1;
smp_mb();
+
+ return 0;
}
#endif
-void smp_message_recv(int msg)
-{
- switch(msg) {
- case PPC_MSG_CALL_FUNCTION:
- generic_smp_call_function_interrupt();
- break;
- case PPC_MSG_RESCHEDULE:
- /* we notice need_resched on exit */
- break;
- case PPC_MSG_CALL_FUNC_SINGLE:
- generic_smp_call_function_single_interrupt();
- break;
- case PPC_MSG_DEBUGGER_BREAK:
- if (crash_ipi_function_ptr) {
- crash_ipi_function_ptr(get_irq_regs());
- break;
- }
-#ifdef CONFIG_DEBUGGER
- debugger_ipi(get_irq_regs());
- break;
-#endif /* CONFIG_DEBUGGER */
- /* FALLTHROUGH */
- default:
- printk("SMP %d: smp_message_recv(): unknown msg %d\n",
- smp_processor_id(), msg);
- break;
- }
-}
-
static irqreturn_t call_function_action(int irq, void *data)
{
generic_smp_call_function_interrupt();
@@ -146,7 +119,7 @@
static irqreturn_t reschedule_action(int irq, void *data)
{
- /* we just need the return path side effect of checking need_resched */
+ scheduler_ipi();
return IRQ_HANDLED;
}
@@ -156,9 +129,17 @@
return IRQ_HANDLED;
}
-static irqreturn_t debug_ipi_action(int irq, void *data)
+irqreturn_t debug_ipi_action(int irq, void *data)
{
- smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
+ if (crash_ipi_function_ptr) {
+ crash_ipi_function_ptr(get_irq_regs());
+ return IRQ_HANDLED;
+ }
+
+#ifdef CONFIG_DEBUGGER
+ debugger_ipi(get_irq_regs());
+#endif /* CONFIG_DEBUGGER */
+
return IRQ_HANDLED;
}
@@ -197,6 +178,66 @@
return err;
}
+#ifdef CONFIG_PPC_SMP_MUXED_IPI
+struct cpu_messages {
+ int messages; /* current messages */
+ unsigned long data; /* data for cause ipi */
+};
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct cpu_messages, ipi_message);
+
+void smp_muxed_ipi_set_data(int cpu, unsigned long data)
+{
+ struct cpu_messages *info = &per_cpu(ipi_message, cpu);
+
+ info->data = data;
+}
+
+void smp_muxed_ipi_message_pass(int cpu, int msg)
+{
+ struct cpu_messages *info = &per_cpu(ipi_message, cpu);
+ char *message = (char *)&info->messages;
+
+ message[msg] = 1;
+ mb();
+ smp_ops->cause_ipi(cpu, info->data);
+}
+
+void smp_muxed_ipi_resend(void)
+{
+ struct cpu_messages *info = &__get_cpu_var(ipi_message);
+
+ if (info->messages)
+ smp_ops->cause_ipi(smp_processor_id(), info->data);
+}
+
+irqreturn_t smp_ipi_demux(void)
+{
+ struct cpu_messages *info = &__get_cpu_var(ipi_message);
+ unsigned int all;
+
+ mb(); /* order any irq clear */
+
+ do {
+ all = xchg_local(&info->messages, 0);
+
+#ifdef __BIG_ENDIAN
+ if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
+ generic_smp_call_function_interrupt();
+ if (all & (1 << (24 - 8 * PPC_MSG_RESCHEDULE)))
+ scheduler_ipi();
+ if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNC_SINGLE)))
+ generic_smp_call_function_single_interrupt();
+ if (all & (1 << (24 - 8 * PPC_MSG_DEBUGGER_BREAK)))
+ debug_ipi_action(0, NULL);
+#else
+#error Unsupported ENDIAN
+#endif
+ } while (info->messages);
+
+ return IRQ_HANDLED;
+}
+#endif /* CONFIG_PPC_SMP_MUXED_IPI */
+
void smp_send_reschedule(int cpu)
{
if (likely(smp_ops))
@@ -216,11 +257,18 @@
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
}
-#ifdef CONFIG_DEBUGGER
-void smp_send_debugger_break(int cpu)
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+void smp_send_debugger_break(void)
{
- if (likely(smp_ops))
- smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
+ int cpu;
+ int me = raw_smp_processor_id();
+
+ if (unlikely(!smp_ops))
+ return;
+
+ for_each_online_cpu(cpu)
+ if (cpu != me)
+ smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
}
#endif
@@ -228,9 +276,9 @@
void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
{
crash_ipi_function_ptr = crash_ipi_callback;
- if (crash_ipi_callback && smp_ops) {
+ if (crash_ipi_callback) {
mb();
- smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK);
+ smp_send_debugger_break();
}
}
#endif
@@ -410,8 +458,6 @@
{
int rc, c;
- secondary_ti = current_set[cpu];
-
if (smp_ops == NULL ||
(smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
return -EINVAL;
@@ -421,6 +467,8 @@
if (rc)
return rc;
+ secondary_ti = current_set[cpu];
+
/* Make sure callin-map entry is 0 (can be leftover a CPU
* hotplug
*/
@@ -434,7 +482,11 @@
/* wake up cpus */
DBG("smp: kicking cpu %d\n", cpu);
- smp_ops->kick_cpu(cpu);
+ rc = smp_ops->kick_cpu(cpu);
+ if (rc) {
+ pr_err("smp: failed starting cpu %d (rc %d)\n", cpu, rc);
+ return rc;
+ }
/*
* wait to see if the cpu made a callin (is actually up).
@@ -507,7 +559,7 @@
}
EXPORT_SYMBOL_GPL(cpu_first_thread_of_core);
-/* Must be called when no change can occur to cpu_present_map,
+/* Must be called when no change can occur to cpu_present_mask,
* i.e. during cpu online or offline.
*/
static struct device_node *cpu_to_l2cache(int cpu)
@@ -608,7 +660,7 @@
* se we pin us down to CPU 0 for a short while
*/
alloc_cpumask_var(&old_mask, GFP_NOWAIT);
- cpumask_copy(old_mask, ¤t->cpus_allowed);
+ cpumask_copy(old_mask, tsk_cpus_allowed(current));
set_cpus_allowed_ptr(current, cpumask_of(boot_cpuid));
if (smp_ops && smp_ops->setup_cpu)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c0d8c20..f0f2199 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -182,6 +182,41 @@
static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+
+unsigned long dscr_default = 0;
+EXPORT_SYMBOL(dscr_default);
+
+static ssize_t show_dscr_default(struct sysdev_class *class,
+ struct sysdev_class_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lx\n", dscr_default);
+}
+
+static ssize_t __used store_dscr_default(struct sysdev_class *class,
+ struct sysdev_class_attribute *attr, const char *buf,
+ size_t count)
+{
+ unsigned long val;
+ int ret = 0;
+
+ ret = sscanf(buf, "%lx", &val);
+ if (ret != 1)
+ return -EINVAL;
+ dscr_default = val;
+
+ return count;
+}
+
+static SYSDEV_CLASS_ATTR(dscr_default, 0600,
+ show_dscr_default, store_dscr_default);
+
+static void sysfs_create_dscr_default(void)
+{
+ int err = 0;
+ if (cpu_has_feature(CPU_FTR_DSCR))
+ err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+ &attr_dscr_default.attr);
+}
#endif /* CONFIG_PPC64 */
#ifdef HAS_PPC_PMC_PA6T
@@ -617,6 +652,9 @@
if (cpu_online(cpu))
register_cpu_online(cpu);
}
+#ifdef CONFIG_PPC64
+ sysfs_create_dscr_default();
+#endif /* CONFIG_PPC64 */
return 0;
}
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5ddb801..b13306b 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -143,7 +143,6 @@
#endif
printk("%s\n", ppc_md.name ? ppc_md.name : "");
- sysfs_printk_last_file();
if (notify_die(DIE_OOPS, str, regs, err, 255,
SIGSEGV) == NOTIFY_STOP)
return 1;
@@ -199,7 +198,7 @@
} else if (show_unhandled_signals &&
unhandled_signal(current, signr) &&
printk_ratelimit()) {
- printk(regs->msr & MSR_SF ? fmt64 : fmt32,
+ printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
current->comm, current->pid, signr,
addr, regs->nip, regs->link, code);
}
@@ -221,7 +220,7 @@
}
#ifdef CONFIG_KEXEC
- cpu_set(smp_processor_id(), cpus_in_sr);
+ cpumask_set_cpu(smp_processor_id(), &cpus_in_sr);
#endif
die("System Reset", regs, SIGABRT);
@@ -909,6 +908,26 @@
return emulate_isel(regs, instword);
}
+#ifdef CONFIG_PPC64
+ /* Emulate the mfspr rD, DSCR. */
+ if (((instword & PPC_INST_MFSPR_DSCR_MASK) == PPC_INST_MFSPR_DSCR) &&
+ cpu_has_feature(CPU_FTR_DSCR)) {
+ PPC_WARN_EMULATED(mfdscr, regs);
+ rd = (instword >> 21) & 0x1f;
+ regs->gpr[rd] = mfspr(SPRN_DSCR);
+ return 0;
+ }
+ /* Emulate the mtspr DSCR, rD. */
+ if (((instword & PPC_INST_MTSPR_DSCR_MASK) == PPC_INST_MTSPR_DSCR) &&
+ cpu_has_feature(CPU_FTR_DSCR)) {
+ PPC_WARN_EMULATED(mtdscr, regs);
+ rd = (instword >> 21) & 0x1f;
+ mtspr(SPRN_DSCR, regs->gpr[rd]);
+ current->thread.dscr_inherit = 1;
+ return 0;
+ }
+#endif
+
return -EINVAL;
}
@@ -1506,6 +1525,10 @@
#ifdef CONFIG_VSX
WARN_EMULATED_SETUP(vsx),
#endif
+#ifdef CONFIG_PPC64
+ WARN_EMULATED_SETUP(mfdscr),
+ WARN_EMULATED_SETUP(mtdscr),
+#endif
};
u32 ppc_warn_emulated;
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index e39cad8..23d65ab 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -62,6 +62,8 @@
udbg_init_cpm();
#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
udbg_init_usbgecko();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP)
+ udbg_init_wsp();
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index baa33a7..6837f83 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <asm/udbg.h>
#include <asm/io.h>
+#include <asm/reg_a2.h>
extern u8 real_readb(volatile u8 __iomem *addr);
extern void real_writeb(u8 data, volatile u8 __iomem *addr);
@@ -298,3 +299,53 @@
udbg_getc_poll = NULL;
}
#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+static void udbg_wsp_flush(void)
+{
+ if (udbg_comport) {
+ while ((readb(&udbg_comport->lsr) & LSR_THRE) == 0)
+ /* wait for idle */;
+ }
+}
+
+static void udbg_wsp_putc(char c)
+{
+ if (udbg_comport) {
+ if (c == '\n')
+ udbg_wsp_putc('\r');
+ udbg_wsp_flush();
+ writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+static int udbg_wsp_getc(void)
+{
+ if (udbg_comport) {
+ while ((readb(&udbg_comport->lsr) & LSR_DR) == 0)
+ ; /* wait for char */
+ return readb(&udbg_comport->rbr);
+ }
+ return -1;
+}
+
+static int udbg_wsp_getc_poll(void)
+{
+ if (udbg_comport)
+ if (readb(&udbg_comport->lsr) & LSR_DR)
+ return readb(&udbg_comport->rbr);
+ return -1;
+}
+
+void __init udbg_init_wsp(void)
+{
+ udbg_comport = (struct NS16550 __iomem *)WSP_UART_VIRT;
+
+ udbg_init_uart(udbg_comport, 57600, 50000000);
+
+ udbg_putc = udbg_wsp_putc;
+ udbg_flush = udbg_wsp_flush;
+ udbg_getc = udbg_wsp_getc;
+ udbg_getc_poll = udbg_wsp_getc_poll;
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 9de6f39..4d5a3ed 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -102,7 +102,7 @@
MTMSRD(r5) /* enable use of VMX now */
isync
PPC_LCMPI 0,r3,0
- beqlr- /* if no previous owner, done */
+ beqlr /* if no previous owner, done */
addi r3,r3,THREAD /* want THREAD of task */
PPC_LL r5,PT_REGS(r3)
PPC_LCMPI 0,r5,0
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index c961de4..0f95b5c 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -236,7 +236,7 @@
int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
{
- return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions);
+ return test_bit(BOOK3S_IRQPRIO_DECREMENTER, &vcpu->arch.pending_exceptions);
}
void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu)
diff --git a/arch/powerpc/kvm/book3s_rmhandlers.S b/arch/powerpc/kvm/book3s_rmhandlers.S
index 2b9c908..1a1b344 100644
--- a/arch/powerpc/kvm/book3s_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_rmhandlers.S
@@ -35,9 +35,7 @@
#if defined(CONFIG_PPC_BOOK3S_64)
-#define LOAD_SHADOW_VCPU(reg) \
- mfspr reg, SPRN_SPRG_PACA
-
+#define LOAD_SHADOW_VCPU(reg) GET_PACA(reg)
#define SHADOW_VCPU_OFF PACA_KVM_SVCPU
#define MSR_NOIRQ MSR_KERNEL & ~(MSR_IR | MSR_DR)
#define FUNC(name) GLUE(.,name)
@@ -72,7 +70,7 @@
.global kvmppc_trampoline_\intno
kvmppc_trampoline_\intno:
- mtspr SPRN_SPRG_SCRATCH0, r13 /* Save r13 */
+ SET_SCRATCH0(r13) /* Save r13 */
/*
* First thing to do is to find out if we're coming
@@ -91,7 +89,7 @@
lwz r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
mtcr r12
PPC_LL r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
- mfspr r13, SPRN_SPRG_SCRATCH0 /* r13 = original r13 */
+ GET_SCRATCH0(r13) /* r13 = original r13 */
b kvmppc_resume_\intno /* Get back original handler */
/* Now we know we're handling a KVM guest */
@@ -114,6 +112,9 @@
INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_STORAGE
INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_STORAGE
INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_EXTERNAL
+#ifdef CONFIG_PPC_BOOK3S_64
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_EXTERNAL_HV
+#endif
INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALIGNMENT
INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PROGRAM
INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_FP_UNAVAIL
@@ -158,7 +159,7 @@
lwz r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
mtcr r12
PPC_LL r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
- mfspr r13, SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r13)
/* And get back into the code */
RFI
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index 7c52ed0..4512642 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -155,14 +155,20 @@
PPC_LL r2, (SHADOW_VCPU_OFF + SVCPU_HOST_R2)(r13)
/* Save guest PC and MSR */
- mfsrr0 r3
+ andi. r0,r12,0x2
+ beq 1f
+ mfspr r3,SPRN_HSRR0
+ mfspr r4,SPRN_HSRR1
+ andi. r12,r12,0x3ffd
+ b 2f
+1: mfsrr0 r3
mfsrr1 r4
-
+2:
PPC_STL r3, (SHADOW_VCPU_OFF + SVCPU_PC)(r13)
PPC_STL r4, (SHADOW_VCPU_OFF + SVCPU_SHADOW_SRR1)(r13)
/* Get scratch'ed off registers */
- mfspr r9, SPRN_SPRG_SCRATCH0
+ GET_SCRATCH0(r9)
PPC_LL r8, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
lwz r7, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
diff --git a/arch/powerpc/lib/alloc.c b/arch/powerpc/lib/alloc.c
index f53e09c..13b676c 100644
--- a/arch/powerpc/lib/alloc.c
+++ b/arch/powerpc/lib/alloc.c
@@ -6,14 +6,6 @@
#include <asm/system.h>
-void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask)
-{
- if (mem_init_done)
- return kmalloc(size, mask);
- else
- return alloc_bootmem(size);
-}
-
void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask)
{
void *p;
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 4d4eeb9..53dcb6b 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -6,6 +6,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#include <asm/page.h>
#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
@@ -15,9 +16,9 @@
.tc ppc64_caches[TC],ppc64_caches
.section ".text"
-
-_GLOBAL(copy_4K_page)
- li r5,4096 /* 4K page size */
+_GLOBAL(copy_page)
+ lis r5,PAGE_SIZE@h
+ ori r5,r5,PAGE_SIZE@l
BEGIN_FTR_SECTION
ld r10,PPC64_CACHES@toc(r2)
lwz r11,DCACHEL1LOGLINESIZE(r10) /* log2 of cache line size */
diff --git a/arch/powerpc/lib/devres.c b/arch/powerpc/lib/devres.c
index deac4d3..e91615a 100644
--- a/arch/powerpc/lib/devres.c
+++ b/arch/powerpc/lib/devres.c
@@ -9,11 +9,11 @@
#include <linux/device.h> /* devres_*(), devm_ioremap_release() */
#include <linux/gfp.h>
-#include <linux/io.h> /* ioremap_flags() */
+#include <linux/io.h> /* ioremap_prot() */
#include <linux/module.h> /* EXPORT_SYMBOL() */
/**
- * devm_ioremap_prot - Managed ioremap_flags()
+ * devm_ioremap_prot - Managed ioremap_prot()
* @dev: Generic device to remap IO address for
* @offset: BUS offset to map
* @size: Size of map
@@ -31,7 +31,7 @@
if (!ptr)
return NULL;
- addr = ioremap_flags(offset, size, flags);
+ addr = ioremap_prot(offset, size, flags);
if (addr) {
*ptr = addr;
devres_add(dev, ptr);
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index ae5189a..9a52349 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/ptrace.h>
+#include <linux/prefetch.h>
#include <asm/sstep.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
@@ -45,6 +46,18 @@
#endif
/*
+ * Emulate the truncation of 64 bit values in 32-bit mode.
+ */
+static unsigned long truncate_if_32bit(unsigned long msr, unsigned long val)
+{
+#ifdef __powerpc64__
+ if ((msr & MSR_64BIT) == 0)
+ val &= 0xffffffffUL;
+#endif
+ return val;
+}
+
+/*
* Determine whether a conditional branch instruction would branch.
*/
static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs)
@@ -90,11 +103,8 @@
if (instr & 0x04000000) /* update forms */
regs->gpr[ra] = ea;
}
-#ifdef __powerpc64__
- if (!(regs->msr & MSR_SF))
- ea &= 0xffffffffUL;
-#endif
- return ea;
+
+ return truncate_if_32bit(regs->msr, ea);
}
#ifdef __powerpc64__
@@ -113,9 +123,8 @@
if ((instr & 3) == 1) /* update forms */
regs->gpr[ra] = ea;
}
- if (!(regs->msr & MSR_SF))
- ea &= 0xffffffffUL;
- return ea;
+
+ return truncate_if_32bit(regs->msr, ea);
}
#endif /* __powerpc64 */
@@ -136,11 +145,8 @@
if (do_update) /* update forms */
regs->gpr[ra] = ea;
}
-#ifdef __powerpc64__
- if (!(regs->msr & MSR_SF))
- ea &= 0xffffffffUL;
-#endif
- return ea;
+
+ return truncate_if_32bit(regs->msr, ea);
}
/*
@@ -466,7 +472,7 @@
regs->ccr = (regs->ccr & 0x0fffffff) | ((regs->xer >> 3) & 0x10000000);
#ifdef __powerpc64__
- if (!(regs->msr & MSR_SF))
+ if (!(regs->msr & MSR_64BIT))
val = (int) val;
#endif
if (val < 0)
@@ -487,7 +493,7 @@
++val;
regs->gpr[rd] = val;
#ifdef __powerpc64__
- if (!(regs->msr & MSR_SF)) {
+ if (!(regs->msr & MSR_64BIT)) {
val = (unsigned int) val;
val1 = (unsigned int) val1;
}
@@ -570,8 +576,7 @@
if ((instr & 2) == 0)
imm += regs->nip;
regs->nip += 4;
- if ((regs->msr & MSR_SF) == 0)
- regs->nip &= 0xffffffffUL;
+ regs->nip = truncate_if_32bit(regs->msr, regs->nip);
if (instr & 1)
regs->link = regs->nip;
if (branch_taken(instr, regs))
@@ -604,13 +609,9 @@
imm -= 0x04000000;
if ((instr & 2) == 0)
imm += regs->nip;
- if (instr & 1) {
- regs->link = regs->nip + 4;
- if ((regs->msr & MSR_SF) == 0)
- regs->link &= 0xffffffffUL;
- }
- if ((regs->msr & MSR_SF) == 0)
- imm &= 0xffffffffUL;
+ if (instr & 1)
+ regs->link = truncate_if_32bit(regs->msr, regs->nip + 4);
+ imm = truncate_if_32bit(regs->msr, imm);
regs->nip = imm;
return 1;
case 19:
@@ -618,11 +619,8 @@
case 16: /* bclr */
case 528: /* bcctr */
imm = (instr & 0x400)? regs->ctr: regs->link;
- regs->nip += 4;
- if ((regs->msr & MSR_SF) == 0) {
- regs->nip &= 0xffffffffUL;
- imm &= 0xffffffffUL;
- }
+ regs->nip = truncate_if_32bit(regs->msr, regs->nip + 4);
+ imm = truncate_if_32bit(regs->msr, imm);
if (instr & 1)
regs->link = regs->nip;
if (branch_taken(instr, regs))
@@ -1616,11 +1614,7 @@
return 0; /* invoke DSI if -EFAULT? */
}
instr_done:
- regs->nip += 4;
-#ifdef __powerpc64__
- if ((regs->msr & MSR_SF) == 0)
- regs->nip &= 0xffffffffUL;
-#endif
+ regs->nip = truncate_if_32bit(regs->msr, regs->nip + 4);
return 1;
logical_done:
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 5b7dd4e..a242b5d 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -118,7 +118,7 @@
BEGIN_FTR_SECTION
cmpdi r9,0 /* check segment size */
bne 3f
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Calc va and put it in r29 */
rldicr r29,r5,28,63-28
rldicl r3,r3,0,36
@@ -401,7 +401,7 @@
BEGIN_FTR_SECTION
cmpdi r9,0 /* check segment size */
bne 3f
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Calc va and put it in r29 */
rldicr r29,r5,28,63-28 /* r29 = (vsid << 28) */
rldicl r3,r3,0,36 /* r3 = (ea & 0x0fffffff) */
@@ -715,7 +715,7 @@
andi. r0,r31,_PAGE_NO_CACHE
/* If so, bail out and refault as a 4k page */
bne- ht64_bail_ok
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_CI_LARGE_PAGE)
/* Prepare new PTE value (turn access RW into DIRTY, then
* add BUSY and ACCESSED)
*/
@@ -736,7 +736,7 @@
BEGIN_FTR_SECTION
cmpdi r9,0 /* check segment size */
bne 3f
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Calc va and put it in r29 */
rldicr r29,r5,28,63-28
rldicl r3,r3,0,36
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 784a400..dfd7648 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -50,9 +50,8 @@
case MMU_PAGE_4K:
va &= ~0xffful;
va |= ssize << 8;
- asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0),
- %2)
- : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+ asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
+ : : "r" (va), "r"(0), "i" (CPU_FTR_HVMODE_206)
: "memory");
break;
default:
@@ -61,9 +60,8 @@
va |= penc << 12;
va |= ssize << 8;
va |= 1; /* L */
- asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0),
- %2)
- : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+ asm volatile(ASM_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0), %2)
+ : : "r" (va), "r"(0), "i" (CPU_FTR_HVMODE_206)
: "memory");
break;
}
@@ -98,8 +96,8 @@
static inline void tlbie(unsigned long va, int psize, int ssize, int local)
{
- unsigned int use_local = local && cpu_has_feature(CPU_FTR_TLBIEL);
- int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+ unsigned int use_local = local && mmu_has_feature(MMU_FTR_TLBIEL);
+ int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
if (use_local)
use_local = mmu_psize_defs[psize].tlbiel;
@@ -503,7 +501,7 @@
} pte_iterate_hashed_end();
}
- if (cpu_has_feature(CPU_FTR_TLBIEL) &&
+ if (mmu_has_feature(MMU_FTR_TLBIEL) &&
mmu_psize_defs[psize].tlbiel && local) {
asm volatile("ptesync":::"memory");
for (i = 0; i < number; i++) {
@@ -517,7 +515,7 @@
}
asm volatile("ptesync":::"memory");
} else {
- int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+ int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
if (lock_tlbie)
raw_spin_lock(&native_tlbie_lock);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 58a022d..26b2872 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -53,6 +53,7 @@
#include <asm/sections.h>
#include <asm/spu.h>
#include <asm/udbg.h>
+#include <asm/code-patching.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -258,11 +259,11 @@
for (; size >= 4; size -= 4, ++prop) {
if (prop[0] == 40) {
DBG("1T segment support detected\n");
- cur_cpu_spec->cpu_features |= CPU_FTR_1T_SEGMENT;
+ cur_cpu_spec->mmu_features |= MMU_FTR_1T_SEGMENT;
return 1;
}
}
- cur_cpu_spec->cpu_features &= ~CPU_FTR_NO_SLBIE_B;
+ cur_cpu_spec->mmu_features &= ~MMU_FTR_NO_SLBIE_B;
return 0;
}
@@ -288,7 +289,7 @@
if (prop != NULL) {
DBG("Page sizes from device-tree:\n");
size /= 4;
- cur_cpu_spec->cpu_features &= ~(CPU_FTR_16M_PAGE);
+ cur_cpu_spec->mmu_features &= ~(MMU_FTR_16M_PAGE);
while(size > 0) {
unsigned int shift = prop[0];
unsigned int slbenc = prop[1];
@@ -316,7 +317,7 @@
break;
case 0x18:
idx = MMU_PAGE_16M;
- cur_cpu_spec->cpu_features |= CPU_FTR_16M_PAGE;
+ cur_cpu_spec->mmu_features |= MMU_FTR_16M_PAGE;
break;
case 0x22:
idx = MMU_PAGE_16G;
@@ -411,7 +412,7 @@
* Not in the device-tree, let's fallback on known size
* list for 16M capable GP & GR
*/
- if (cpu_has_feature(CPU_FTR_16M_PAGE))
+ if (mmu_has_feature(MMU_FTR_16M_PAGE))
memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
sizeof(mmu_psize_defaults_gp));
found:
@@ -441,7 +442,7 @@
mmu_vmalloc_psize = MMU_PAGE_64K;
if (mmu_linear_psize == MMU_PAGE_4K)
mmu_linear_psize = MMU_PAGE_64K;
- if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) {
+ if (mmu_has_feature(MMU_FTR_CI_LARGE_PAGE)) {
/*
* Don't use 64k pages for ioremap on pSeries, since
* that would stop us accessing the HEA ethernet.
@@ -547,15 +548,7 @@
}
#endif /* CONFIG_MEMORY_HOTPLUG */
-static inline void make_bl(unsigned int *insn_addr, void *func)
-{
- unsigned long funcp = *((unsigned long *)func);
- int offset = funcp - (unsigned long)insn_addr;
-
- *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc));
- flush_icache_range((unsigned long)insn_addr, 4+
- (unsigned long)insn_addr);
-}
+#define FUNCTION_TEXT(A) ((*(unsigned long *)(A)))
static void __init htab_finish_init(void)
{
@@ -570,16 +563,33 @@
extern unsigned int *ht64_call_hpte_remove;
extern unsigned int *ht64_call_hpte_updatepp;
- make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert);
- make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert);
- make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove);
- make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp);
+ patch_branch(ht64_call_hpte_insert1,
+ FUNCTION_TEXT(ppc_md.hpte_insert),
+ BRANCH_SET_LINK);
+ patch_branch(ht64_call_hpte_insert2,
+ FUNCTION_TEXT(ppc_md.hpte_insert),
+ BRANCH_SET_LINK);
+ patch_branch(ht64_call_hpte_remove,
+ FUNCTION_TEXT(ppc_md.hpte_remove),
+ BRANCH_SET_LINK);
+ patch_branch(ht64_call_hpte_updatepp,
+ FUNCTION_TEXT(ppc_md.hpte_updatepp),
+ BRANCH_SET_LINK);
+
#endif /* CONFIG_PPC_HAS_HASH_64K */
- make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
- make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
- make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
- make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
+ patch_branch(htab_call_hpte_insert1,
+ FUNCTION_TEXT(ppc_md.hpte_insert),
+ BRANCH_SET_LINK);
+ patch_branch(htab_call_hpte_insert2,
+ FUNCTION_TEXT(ppc_md.hpte_insert),
+ BRANCH_SET_LINK);
+ patch_branch(htab_call_hpte_remove,
+ FUNCTION_TEXT(ppc_md.hpte_remove),
+ BRANCH_SET_LINK);
+ patch_branch(htab_call_hpte_updatepp,
+ FUNCTION_TEXT(ppc_md.hpte_updatepp),
+ BRANCH_SET_LINK);
}
static void __init htab_initialize(void)
@@ -598,7 +608,7 @@
/* Initialize page sizes */
htab_init_page_sizes();
- if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
+ if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) {
mmu_kernel_ssize = MMU_SEGSIZE_1T;
mmu_highuser_ssize = MMU_SEGSIZE_1T;
printk(KERN_INFO "Using 1TB segments\n");
@@ -739,7 +749,7 @@
/* Initialize stab / SLB management except on iSeries
*/
- if (cpu_has_feature(CPU_FTR_SLB))
+ if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
else if (!firmware_has_feature(FW_FEATURE_ISERIES))
stab_initialize(get_paca()->stab_real);
@@ -756,7 +766,7 @@
* in real mode on pSeries and we want a virtual address on
* iSeries anyway
*/
- if (cpu_has_feature(CPU_FTR_SLB))
+ if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
else
stab_initialize(get_paca()->stab_addr);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9bb249c..0b9a5c1 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -529,7 +529,7 @@
{
int psize;
- if (!cpu_has_feature(CPU_FTR_16M_PAGE))
+ if (!mmu_has_feature(MMU_FTR_16M_PAGE))
return -ENODEV;
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 2535828..3bafc3d 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -20,9 +20,205 @@
#include <linux/idr.h>
#include <linux/module.h>
#include <linux/gfp.h>
+#include <linux/slab.h>
#include <asm/mmu_context.h>
+#ifdef CONFIG_PPC_ICSWX
+/*
+ * The processor and its L2 cache cause the icswx instruction to
+ * generate a COP_REQ transaction on PowerBus. The transaction has
+ * no address, and the processor does not perform an MMU access
+ * to authenticate the transaction. The command portion of the
+ * PowerBus COP_REQ transaction includes the LPAR_ID (LPID) and
+ * the coprocessor Process ID (PID), which the coprocessor compares
+ * to the authorized LPID and PID held in the coprocessor, to determine
+ * if the process is authorized to generate the transaction.
+ * The data of the COP_REQ transaction is 128-byte or less and is
+ * placed in cacheable memory on a 128-byte cache line boundary.
+ *
+ * The task to use a coprocessor should use use_cop() to allocate
+ * a coprocessor PID before executing icswx instruction. use_cop()
+ * also enables the coprocessor context switching. Drop_cop() is
+ * used to free the coprocessor PID.
+ *
+ * Example:
+ * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
+ * Each HFI have multiple windows. Each HFI window serves as a
+ * network device sending to and receiving from HFI network.
+ * HFI immediate send function uses icswx instruction. The immediate
+ * send function allows small (single cache-line) packets be sent
+ * without using the regular HFI send FIFO and doorbell, which are
+ * much slower than immediate send.
+ *
+ * For each task intending to use HFI immediate send, the HFI driver
+ * calls use_cop() to obtain a coprocessor PID for the task.
+ * The HFI driver then allocate a free HFI window and save the
+ * coprocessor PID to the HFI window to allow the task to use the
+ * HFI window.
+ *
+ * The HFI driver repeatedly creates immediate send packets and
+ * issues icswx instruction to send data through the HFI window.
+ * The HFI compares the coprocessor PID in the CPU PID register
+ * to the PID held in the HFI window to determine if the transaction
+ * is allowed.
+ *
+ * When the task to release the HFI window, the HFI driver calls
+ * drop_cop() to release the coprocessor PID.
+ */
+
+#define COP_PID_NONE 0
+#define COP_PID_MIN (COP_PID_NONE + 1)
+#define COP_PID_MAX (0xFFFF)
+
+static DEFINE_SPINLOCK(mmu_context_acop_lock);
+static DEFINE_IDA(cop_ida);
+
+void switch_cop(struct mm_struct *next)
+{
+ mtspr(SPRN_PID, next->context.cop_pid);
+ mtspr(SPRN_ACOP, next->context.acop);
+}
+
+static int new_cop_pid(struct ida *ida, int min_id, int max_id,
+ spinlock_t *lock)
+{
+ int index;
+ int err;
+
+again:
+ if (!ida_pre_get(ida, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock(lock);
+ err = ida_get_new_above(ida, min_id, &index);
+ spin_unlock(lock);
+
+ if (err == -EAGAIN)
+ goto again;
+ else if (err)
+ return err;
+
+ if (index > max_id) {
+ spin_lock(lock);
+ ida_remove(ida, index);
+ spin_unlock(lock);
+ return -ENOMEM;
+ }
+
+ return index;
+}
+
+static void sync_cop(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ if (mm == current->active_mm)
+ switch_cop(current->active_mm);
+}
+
+/**
+ * Start using a coprocessor.
+ * @acop: mask of coprocessor to be used.
+ * @mm: The mm the coprocessor to associate with. Most likely current mm.
+ *
+ * Return a positive PID if successful. Negative errno otherwise.
+ * The returned PID will be fed to the coprocessor to determine if an
+ * icswx transaction is authenticated.
+ */
+int use_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX))
+ return -ENODEV;
+
+ if (!mm || !acop)
+ return -EINVAL;
+
+ /* We need to make sure mm_users doesn't change */
+ down_read(&mm->mmap_sem);
+ spin_lock(mm->context.cop_lockp);
+
+ if (mm->context.cop_pid == COP_PID_NONE) {
+ ret = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
+ &mmu_context_acop_lock);
+ if (ret < 0)
+ goto out;
+
+ mm->context.cop_pid = ret;
+ }
+ mm->context.acop |= acop;
+
+ sync_cop(mm);
+
+ /*
+ * If this is a threaded process then there might be other threads
+ * running. We need to send an IPI to force them to pick up any
+ * change in PID and ACOP.
+ */
+ if (atomic_read(&mm->mm_users) > 1)
+ smp_call_function(sync_cop, mm, 1);
+
+ ret = mm->context.cop_pid;
+
+out:
+ spin_unlock(mm->context.cop_lockp);
+ up_read(&mm->mmap_sem);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(use_cop);
+
+/**
+ * Stop using a coprocessor.
+ * @acop: mask of coprocessor to be stopped.
+ * @mm: The mm the coprocessor associated with.
+ */
+void drop_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int free_pid = COP_PID_NONE;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX))
+ return;
+
+ if (WARN_ON_ONCE(!mm))
+ return;
+
+ /* We need to make sure mm_users doesn't change */
+ down_read(&mm->mmap_sem);
+ spin_lock(mm->context.cop_lockp);
+
+ mm->context.acop &= ~acop;
+
+ if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
+ free_pid = mm->context.cop_pid;
+ mm->context.cop_pid = COP_PID_NONE;
+ }
+
+ sync_cop(mm);
+
+ /*
+ * If this is a threaded process then there might be other threads
+ * running. We need to send an IPI to force them to pick up any
+ * change in PID and ACOP.
+ */
+ if (atomic_read(&mm->mm_users) > 1)
+ smp_call_function(sync_cop, mm, 1);
+
+ if (free_pid != COP_PID_NONE) {
+ spin_lock(&mmu_context_acop_lock);
+ ida_remove(&cop_ida, free_pid);
+ spin_unlock(&mmu_context_acop_lock);
+ }
+
+ spin_unlock(mm->context.cop_lockp);
+ up_read(&mm->mmap_sem);
+}
+EXPORT_SYMBOL_GPL(drop_cop);
+
+#endif /* CONFIG_PPC_ICSWX */
+
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
@@ -31,7 +227,6 @@
* Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
* so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
*/
-#define NO_CONTEXT 0
#define MAX_CONTEXT ((1UL << 19) - 1)
int __init_new_context(void)
@@ -79,6 +274,16 @@
slice_set_user_psize(mm, mmu_virtual_psize);
subpage_prot_init_new_context(mm);
mm->context.id = index;
+#ifdef CONFIG_PPC_ICSWX
+ mm->context.cop_lockp = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
+ if (!mm->context.cop_lockp) {
+ __destroy_context(index);
+ subpage_prot_free(mm);
+ mm->context.id = MMU_NO_CONTEXT;
+ return -ENOMEM;
+ }
+ spin_lock_init(mm->context.cop_lockp);
+#endif /* CONFIG_PPC_ICSWX */
return 0;
}
@@ -93,7 +298,12 @@
void destroy_context(struct mm_struct *mm)
{
+#ifdef CONFIG_PPC_ICSWX
+ drop_cop(mm->context.acop, mm);
+ kfree(mm->context.cop_lockp);
+ mm->context.cop_lockp = NULL;
+#endif /* CONFIG_PPC_ICSWX */
__destroy_context(mm->context.id);
subpage_prot_free(mm);
- mm->context.id = NO_CONTEXT;
+ mm->context.id = MMU_NO_CONTEXT;
}
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index c0aab52..336807d 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -338,12 +338,14 @@
return NOTIFY_OK;
switch (action) {
- case CPU_ONLINE:
- case CPU_ONLINE_FROZEN:
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
break;
#ifdef CONFIG_HOTPLUG_CPU
+ case CPU_UP_CANCELED:
+ case CPU_UP_CANCELED_FROZEN:
case CPU_DEAD:
case CPU_DEAD_FROZEN:
pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
@@ -407,7 +409,17 @@
} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
first_context = 1;
last_context = 65535;
- } else {
+ } else
+#ifdef CONFIG_PPC_BOOK3E_MMU
+ if (mmu_has_feature(MMU_FTR_TYPE_3E)) {
+ u32 mmucfg = mfspr(SPRN_MMUCFG);
+ u32 pid_bits = (mmucfg & MMUCFG_PIDSIZE_MASK)
+ >> MMUCFG_PIDSIZE_SHIFT;
+ first_context = 1;
+ last_context = (1UL << (pid_bits + 1)) - 1;
+ } else
+#endif
+ {
first_context = 1;
last_context = 255;
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5ec1dad..2164006 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -311,14 +311,13 @@
static int __init find_min_common_depth(void)
{
int depth;
- struct device_node *rtas_root;
struct device_node *chosen;
+ struct device_node *root;
const char *vec5;
- rtas_root = of_find_node_by_path("/rtas");
-
- if (!rtas_root)
- return -1;
+ root = of_find_node_by_path("/rtas");
+ if (!root)
+ root = of_find_node_by_path("/");
/*
* This property is a set of 32-bit integers, each representing
@@ -332,7 +331,7 @@
* NUMA boundary and the following are progressively less significant
* boundaries. There can be more than one level of NUMA.
*/
- distance_ref_points = of_get_property(rtas_root,
+ distance_ref_points = of_get_property(root,
"ibm,associativity-reference-points",
&distance_ref_points_depth);
@@ -376,11 +375,11 @@
distance_ref_points_depth = MAX_DISTANCE_REF_POINTS;
}
- of_node_put(rtas_root);
+ of_node_put(root);
return depth;
err:
- of_node_put(rtas_root);
+ of_node_put(root);
return -1;
}
@@ -1453,7 +1452,7 @@
unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
struct sys_device *sysdev;
- for_each_cpu_mask(cpu, cpu_associativity_changes_mask) {
+ for_each_cpu(cpu,&cpu_associativity_changes_mask) {
vphn_get_associativity(cpu, associativity);
nid = associativity_to_nid(associativity);
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 8dc41c0..51f8795 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -133,7 +133,15 @@
EXPORT_SYMBOL(ioremap);
void __iomem *
-ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
+ioremap_wc(phys_addr_t addr, unsigned long size)
+{
+ return __ioremap_caller(addr, size, _PAGE_NO_CACHE,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wc);
+
+void __iomem *
+ioremap_prot(phys_addr_t addr, unsigned long size, unsigned long flags)
{
/* writeable implies dirty for kernel addresses */
if (flags & _PAGE_RW)
@@ -152,7 +160,7 @@
return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
}
-EXPORT_SYMBOL(ioremap_flags);
+EXPORT_SYMBOL(ioremap_prot);
void __iomem *
__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 88927a0..6e595f6 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -255,7 +255,17 @@
return __ioremap_caller(addr, size, flags, caller);
}
-void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
+void __iomem * ioremap_wc(phys_addr_t addr, unsigned long size)
+{
+ unsigned long flags = _PAGE_NO_CACHE;
+ void *caller = __builtin_return_address(0);
+
+ if (ppc_md.ioremap)
+ return ppc_md.ioremap(addr, size, flags, caller);
+ return __ioremap_caller(addr, size, flags, caller);
+}
+
+void __iomem * ioremap_prot(phys_addr_t addr, unsigned long size,
unsigned long flags)
{
void *caller = __builtin_return_address(0);
@@ -311,7 +321,8 @@
}
EXPORT_SYMBOL(ioremap);
-EXPORT_SYMBOL(ioremap_flags);
+EXPORT_SYMBOL(ioremap_wc);
+EXPORT_SYMBOL(ioremap_prot);
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(__ioremap_at);
EXPORT_SYMBOL(iounmap);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 1d98ecc..e22276c 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -24,6 +24,7 @@
#include <asm/firmware.h>
#include <linux/compiler.h>
#include <asm/udbg.h>
+#include <asm/code-patching.h>
extern void slb_allocate_realmode(unsigned long ea);
@@ -166,7 +167,7 @@
int esid_1t_count;
/* System is not 1T segment size capable. */
- if (!cpu_has_feature(CPU_FTR_1T_SEGMENT))
+ if (!mmu_has_feature(MMU_FTR_1T_SEGMENT))
return (GET_ESID(addr1) == GET_ESID(addr2));
esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) +
@@ -201,7 +202,7 @@
*/
hard_irq_disable();
offset = get_paca()->slb_cache_ptr;
- if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
+ if (!mmu_has_feature(MMU_FTR_NO_SLBIE_B) &&
offset <= SLB_CACHE_ENTRIES) {
int i;
asm volatile("isync" : : : "memory");
@@ -249,9 +250,8 @@
static inline void patch_slb_encoding(unsigned int *insn_addr,
unsigned int immed)
{
- *insn_addr = (*insn_addr & 0xffff0000) | immed;
- flush_icache_range((unsigned long)insn_addr, 4+
- (unsigned long)insn_addr);
+ int insn = (*insn_addr & 0xffff0000) | immed;
+ patch_instruction(insn_addr, insn);
}
void slb_set_size(u16 size)
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 95ce355..ef653dc 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -58,7 +58,7 @@
li r11,0
BEGIN_FTR_SECTION
b slb_finish_load
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T
1:
@@ -87,7 +87,7 @@
6:
BEGIN_FTR_SECTION
b slb_finish_load
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T
0: /* user address: proto-VSID = context << 15 | ESID. First check
@@ -138,11 +138,11 @@
ld r9,PACACONTEXTID(r13)
BEGIN_FTR_SECTION
cmpldi r10,0x1000
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
rldimi r10,r9,USER_ESID_BITS,0
BEGIN_FTR_SECTION
bge slb_finish_load_1T
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
b slb_finish_load
8: /* invalid EA */
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 446a018..41e3164 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -243,7 +243,7 @@
{
int cpu;
- if (cpu_has_feature(CPU_FTR_SLB))
+ if (mmu_has_feature(MMU_FTR_SLB))
return;
for_each_possible_cpu(cpu) {
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index aa46e9d..19395f1 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -87,7 +87,7 @@
mpic_setup_this_cpu();
}
-static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+static int __cpuinit smp_iss4xx_kick_cpu(int cpu)
{
struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
const u64 *spin_table_addr_prop;
@@ -104,7 +104,7 @@
NULL);
if (spin_table_addr_prop == NULL) {
pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
- return;
+ return -ENOENT;
}
/* Assume it's mapped as part of the linear mapping. This is a bit
@@ -117,6 +117,8 @@
smp_wmb();
spin_table[1] = __pa(start_secondary_47x);
mb();
+
+ return 0;
}
static struct smp_ops_t iss_smp_ops = {
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index cfc4b20..9f09319 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -61,7 +61,7 @@
static void
cpld_mask_irq(struct irq_data *d)
{
- unsigned int cpld_irq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int cpld_irq = (unsigned int)irqd_to_hwirq(d);
void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
out_8(pic_mask,
@@ -71,7 +71,7 @@
static void
cpld_unmask_irq(struct irq_data *d)
{
- unsigned int cpld_irq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int cpld_irq = (unsigned int)irqd_to_hwirq(d);
void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
out_8(pic_mask,
@@ -97,7 +97,7 @@
status |= (ignore | mask);
if (status == 0xff)
- return NO_IRQ_IGNORE;
+ return NO_IRQ;
cpld_irq = ffz(status) + offset;
@@ -109,14 +109,14 @@
{
irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
&cpld_regs->pci_mask);
- if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+ if (irq != NO_IRQ) {
generic_handle_irq(irq);
return;
}
irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
&cpld_regs->misc_mask);
- if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+ if (irq != NO_IRQ) {
generic_handle_irq(irq);
return;
}
diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c
index 57a6a34..96f85e5 100644
--- a/arch/powerpc/platforms/52xx/media5200.c
+++ b/arch/powerpc/platforms/52xx/media5200.c
@@ -56,7 +56,7 @@
spin_lock_irqsave(&media5200_irq.lock, flags);
val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
- val |= 1 << (MEDIA5200_IRQ_SHIFT + irq_map[d->irq].hwirq);
+ val |= 1 << (MEDIA5200_IRQ_SHIFT + irqd_to_hwirq(d));
out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
spin_unlock_irqrestore(&media5200_irq.lock, flags);
}
@@ -68,7 +68,7 @@
spin_lock_irqsave(&media5200_irq.lock, flags);
val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
- val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irq_map[d->irq].hwirq));
+ val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irqd_to_hwirq(d)));
out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
spin_unlock_irqrestore(&media5200_irq.lock, flags);
}
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 1dd1540..1a9a495 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -157,48 +157,30 @@
*/
static void mpc52xx_extirq_mask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_clrbit(&intr->ctrl, 11 - l2irq);
}
static void mpc52xx_extirq_unmask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_setbit(&intr->ctrl, 11 - l2irq);
}
static void mpc52xx_extirq_ack(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_setbit(&intr->ctrl, 27-l2irq);
}
static int mpc52xx_extirq_set_type(struct irq_data *d, unsigned int flow_type)
{
u32 ctrl_reg, type;
- int irq;
- int l2irq;
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
void *handler = handle_level_irq;
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
- pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type);
+ pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__,
+ (int) irqd_to_hwirq(d), l2irq, flow_type);
switch (flow_type) {
case IRQF_TRIGGER_HIGH: type = 0; break;
@@ -237,23 +219,13 @@
static void mpc52xx_main_mask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_setbit(&intr->main_mask, 16 - l2irq);
}
static void mpc52xx_main_unmask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_clrbit(&intr->main_mask, 16 - l2irq);
}
@@ -270,23 +242,13 @@
*/
static void mpc52xx_periph_mask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_setbit(&intr->per_mask, 31 - l2irq);
}
static void mpc52xx_periph_unmask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_clrbit(&intr->per_mask, 31 - l2irq);
}
@@ -303,34 +265,19 @@
*/
static void mpc52xx_sdma_mask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_setbit(&sdma->IntMask, l2irq);
}
static void mpc52xx_sdma_unmask(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
io_be_clrbit(&sdma->IntMask, l2irq);
}
static void mpc52xx_sdma_ack(struct irq_data *d)
{
- int irq;
- int l2irq;
-
- irq = irq_map[d->irq].hwirq;
- l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+ int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
out_be32(&sdma->IntPend, 1 << l2irq);
}
@@ -539,7 +486,7 @@
unsigned int mpc52xx_get_irq(void)
{
u32 status;
- int irq = NO_IRQ_IGNORE;
+ int irq;
status = in_be32(&intr->enc_status);
if (status & 0x00000400) { /* critical */
@@ -562,6 +509,8 @@
} else {
irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET);
}
+ } else {
+ return NO_IRQ;
}
return irq_linear_revmap(mpc52xx_irqhost, irq);
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 4a4eb6f..8ccf9ed 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -42,7 +42,7 @@
static void pq2ads_pci_mask_irq(struct irq_data *d)
{
struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d);
- int irq = NUM_IRQS - virq_to_hw(d->irq) - 1;
+ int irq = NUM_IRQS - irqd_to_hwirq(d) - 1;
if (irq != -1) {
unsigned long flags;
@@ -58,7 +58,7 @@
static void pq2ads_pci_unmask_irq(struct irq_data *d)
{
struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d);
- int irq = NUM_IRQS - virq_to_hw(d->irq) - 1;
+ int irq = NUM_IRQS - irqd_to_hwirq(d) - 1;
if (irq != -1) {
unsigned long flags;
@@ -112,16 +112,8 @@
return 0;
}
-static void pci_host_unmap(struct irq_host *h, unsigned int virq)
-{
- /* remove chip and handler */
- irq_set_chip_data(virq, NULL);
- irq_set_chip(virq, NULL);
-}
-
static struct irq_host_ops pci_pic_host_ops = {
.map = pci_pic_host_map,
- .unmap = pci_host_unmap,
};
int __init pq2ads_pci_init_irq(void)
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 1882729..104faa8 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -318,17 +318,20 @@
.end = mpc83xx_suspend_end,
};
+static struct of_device_id pmc_match[];
static int pmc_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct device_node *np = ofdev->dev.of_node;
struct resource res;
struct pmc_type *type;
int ret = 0;
- if (!ofdev->dev.of_match)
+ match = of_match_device(pmc_match, &ofdev->dev);
+ if (!match)
return -EINVAL;
- type = ofdev->dev.of_match->data;
+ type = match->data;
if (!of_device_is_available(np))
return -ENODEV;
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 0d00ff9..d6a93a10 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -41,7 +41,7 @@
#define NUM_BOOT_ENTRY 8
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
-static void __init
+static int __init
smp_85xx_kick_cpu(int nr)
{
unsigned long flags;
@@ -60,7 +60,7 @@
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
- return;
+ return -ENOENT;
}
/*
@@ -107,6 +107,8 @@
iounmap(bptr_vaddr);
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
+
+ return 0;
}
static void __init
@@ -233,8 +235,10 @@
smp_85xx_ops.message_pass = smp_mpic_message_pass;
}
- if (cpu_has_feature(CPU_FTR_DBELL))
- smp_85xx_ops.message_pass = doorbell_message_pass;
+ if (cpu_has_feature(CPU_FTR_DBELL)) {
+ smp_85xx_ops.message_pass = smp_muxed_ipi_message_pass;
+ smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
+ }
BUG_ON(!smp_85xx_ops.message_pass);
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index db86462..12cb9bb 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -48,8 +48,6 @@
[8] = {0, IRQ_TYPE_LEVEL_HIGH},
};
-#define socrates_fpga_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
-
static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
static void __iomem *socrates_fpga_pic_iobase;
@@ -110,11 +108,9 @@
static void socrates_fpga_pic_ack(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq, irq_line;
+ unsigned int irq_line, hwirq = irqd_to_hwirq(d);
uint32_t mask;
- hwirq = socrates_fpga_irq_to_hw(d->irq);
-
irq_line = fpga_irqs[hwirq].irq_line;
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -127,12 +123,10 @@
static void socrates_fpga_pic_mask(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
int irq_line;
u32 mask;
- hwirq = socrates_fpga_irq_to_hw(d->irq);
-
irq_line = fpga_irqs[hwirq].irq_line;
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -145,12 +139,10 @@
static void socrates_fpga_pic_mask_ack(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
int irq_line;
u32 mask;
- hwirq = socrates_fpga_irq_to_hw(d->irq);
-
irq_line = fpga_irqs[hwirq].irq_line;
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -164,12 +156,10 @@
static void socrates_fpga_pic_unmask(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
int irq_line;
u32 mask;
- hwirq = socrates_fpga_irq_to_hw(d->irq);
-
irq_line = fpga_irqs[hwirq].irq_line;
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -182,12 +172,10 @@
static void socrates_fpga_pic_eoi(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
int irq_line;
u32 mask;
- hwirq = socrates_fpga_irq_to_hw(d->irq);
-
irq_line = fpga_irqs[hwirq].irq_line;
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -201,12 +189,10 @@
unsigned int flow_type)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
int polarity;
u32 mask;
- hwirq = socrates_fpga_irq_to_hw(d->irq);
-
if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
return -EINVAL;
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 0beec7d..94594e5 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -46,8 +46,6 @@
#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
-#define gef_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
-
static DEFINE_RAW_SPINLOCK(gef_pic_lock);
@@ -113,11 +111,9 @@
static void gef_pic_mask(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
u32 mask;
- hwirq = gef_irq_to_hw(d->irq);
-
raw_spin_lock_irqsave(&gef_pic_lock, flags);
mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
mask &= ~(1 << hwirq);
@@ -136,11 +132,9 @@
static void gef_pic_unmask(struct irq_data *d)
{
unsigned long flags;
- unsigned int hwirq;
+ unsigned int hwirq = irqd_to_hwirq(d);
u32 mask;
- hwirq = gef_irq_to_hw(d->irq);
-
raw_spin_lock_irqsave(&gef_pic_lock, flags);
mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
mask |= (1 << hwirq);
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 018cc67..a896511 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -66,7 +66,7 @@
return;
}
- ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+ ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9:wakeup", NULL);
if (ret) {
pr_err("%s: can't request pixis event IRQ: %d\n",
__func__, ret);
@@ -105,45 +105,77 @@
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-static u32 get_busfreq(void)
-{
- struct device_node *node;
+/*
+ * DIU Area Descriptor
+ *
+ * The MPC8610 reference manual shows the bits of the AD register in
+ * little-endian order, which causes the BLUE_C field to be split into two
+ * parts. To simplify the definition of the MAKE_AD() macro, we define the
+ * fields in big-endian order and byte-swap the result.
+ *
+ * So even though the registers don't look like they're in the
+ * same bit positions as they are on the P1022, the same value is written to
+ * the AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F 0x10000000
+#define AD_ALPHA_C_MASK 0x0E000000
+#define AD_ALPHA_C_SHIFT 25
+#define AD_BLUE_C_MASK 0x01800000
+#define AD_BLUE_C_SHIFT 23
+#define AD_GREEN_C_MASK 0x00600000
+#define AD_GREEN_C_SHIFT 21
+#define AD_RED_C_MASK 0x00180000
+#define AD_RED_C_SHIFT 19
+#define AD_PALETTE 0x00040000
+#define AD_PIXEL_S_MASK 0x00030000
+#define AD_PIXEL_S_SHIFT 16
+#define AD_COMP_3_MASK 0x0000F000
+#define AD_COMP_3_SHIFT 12
+#define AD_COMP_2_MASK 0x00000F00
+#define AD_COMP_2_SHIFT 8
+#define AD_COMP_1_MASK 0x000000F0
+#define AD_COMP_1_SHIFT 4
+#define AD_COMP_0_MASK 0x0000000F
+#define AD_COMP_0_SHIFT 0
- u32 fs_busfreq = 0;
- node = of_find_node_by_type(NULL, "cpu");
- if (node) {
- unsigned int size;
- const unsigned int *prop =
- of_get_property(node, "bus-frequency", &size);
- if (prop)
- fs_busfreq = *prop;
- of_node_put(node);
- };
- return fs_busfreq;
-}
+#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \
+ cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \
+ (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \
+ (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \
+ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
+ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
int monitor_port)
{
static const unsigned long pixelformat[][3] = {
- {0x88882317, 0x88083218, 0x65052119},
- {0x88883316, 0x88082219, 0x65053118},
+ {
+ MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
+ MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
+ MAKE_AD(4, 0, 2, 1, 1, 5, 6, 5, 0)
+ },
+ {
+ MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8),
+ MAKE_AD(4, 0, 2, 1, 2, 8, 8, 8, 0),
+ MAKE_AD(4, 2, 0, 1, 1, 5, 6, 5, 0)
+ },
};
- unsigned int pix_fmt, arch_monitor;
+ unsigned int arch_monitor;
+ /* The DVI port is mis-wired on revision 1 of this board. */
arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
- /* DVI port for board version 0x01 */
- if (bits_per_pixel == 32)
- pix_fmt = pixelformat[arch_monitor][0];
- else if (bits_per_pixel == 24)
- pix_fmt = pixelformat[arch_monitor][1];
- else if (bits_per_pixel == 16)
- pix_fmt = pixelformat[arch_monitor][2];
- else
- pix_fmt = pixelformat[1][0];
-
- return pix_fmt;
+ switch (bits_per_pixel) {
+ case 32:
+ return pixelformat[arch_monitor][0];
+ case 24:
+ return pixelformat[arch_monitor][1];
+ case 16:
+ return pixelformat[arch_monitor][2];
+ default:
+ pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel);
+ return 0;
+ }
}
void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
@@ -190,8 +222,7 @@
}
/* Pixel Clock configuration */
- pr_debug("DIU: Bus Frequency = %d\n", get_busfreq());
- speed_ccb = get_busfreq();
+ speed_ccb = fsl_get_sys_freq();
/* Calculate the pixel clock with the smallest error */
/* calculate the following in steps to avoid overflow */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index eacea0e..af09bae 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -56,7 +56,7 @@
}
-static void __init
+static int __init
smp_86xx_kick_cpu(int nr)
{
unsigned int save_vector;
@@ -65,7 +65,7 @@
unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100);
if (nr < 0 || nr >= NR_CPUS)
- return;
+ return -ENOENT;
pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr);
@@ -92,6 +92,8 @@
local_irq_restore(flags);
pr_debug("wait CPU #%d for %d msecs.\n", nr, n);
+
+ return 0;
}
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 9ecce99..1e12108 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -150,7 +150,7 @@
*/
cpu = of_find_node_by_type(NULL, "cpu");
virq= irq_of_parse_and_map(cpu, 0);
- irq = irq_map[virq].hwirq;
+ irq = virq_to_hw(virq);
sys_tmr2 = immr_map(im_sit);
out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index f7b0772..f970ca2 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -20,6 +20,7 @@
source "arch/powerpc/platforms/44x/Kconfig"
source "arch/powerpc/platforms/40x/Kconfig"
source "arch/powerpc/platforms/amigaone/Kconfig"
+source "arch/powerpc/platforms/wsp/Kconfig"
config KVM_GUEST
bool "KVM Guest support"
@@ -56,16 +57,19 @@
depends on PPC_RTAS
default n
+config PPC_SMP_MUXED_IPI
+ bool
+ help
+ Select this opton if your platform supports SMP and your
+ interrupt controller provides less than 4 interrupts to each
+ cpu. This will enable the generic code to multiplex the 4
+ messages on to one ipi.
+
config PPC_UDBG_BEAT
bool "BEAT based debug console"
depends on PPC_CELLEB
default n
-config XICS
- depends on PPC_PSERIES
- bool
- default y
-
config IPIC
bool
default n
@@ -147,14 +151,27 @@
bool
default n
+config PPC_P7_NAP
+ bool
+ default n
+
config PPC_INDIRECT_IO
bool
select GENERIC_IOMAP
- default n
+
+config PPC_INDIRECT_PIO
+ bool
+ select PPC_INDIRECT_IO
+
+config PPC_INDIRECT_MMIO
+ bool
+ select PPC_INDIRECT_IO
+
+config PPC_IO_WORKAROUNDS
+ bool
config GENERIC_IOMAP
bool
- default n
source "drivers/cpufreq/Kconfig"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 111138c..2165b65 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -73,6 +73,7 @@
config PPC_BOOK3E_64
bool "Embedded processors"
select PPC_FPU # Make it a choice ?
+ select PPC_SMP_MUXED_IPI
endchoice
@@ -107,6 +108,10 @@
depends on PPC64 && PPC_BOOK3S
def_bool y
+config PPC_A2
+ bool
+ depends on PPC_BOOK3E_64
+
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
depends on PPC64 && PPC_BOOK3S
@@ -174,6 +179,7 @@
config PPC_FSL_BOOK3E
bool
select FSL_EMB_PERFMON
+ select PPC_SMP_MUXED_IPI
default y if FSL_BOOKE
config PTE_64BIT
@@ -226,6 +232,24 @@
If in doubt, say Y here.
+config PPC_ICSWX
+ bool "Support for PowerPC icswx coprocessor instruction"
+ depends on POWER4
+ default n
+ ---help---
+
+ This option enables kernel support for the PowerPC Initiate
+ Coprocessor Store Word (icswx) coprocessor instruction on POWER7
+ or newer processors.
+
+ This option is only useful if you have a processor that supports
+ the icswx coprocessor instruction. It does not have any effect
+ on processors without the icswx coprocessor instruction.
+
+ This option slightly increases kernel memory usage.
+
+ If in doubt, say N here.
+
config SPE
bool "SPE Support"
depends on E200 || (E500 && !PPC_E500MC)
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index fdb9f0b..73e2116 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -22,3 +22,4 @@
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
obj-$(CONFIG_AMIGAONE) += amigaone/
+obj-$(CONFIG_PPC_WSP) += wsp/
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 81239eb..67d5009 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -6,7 +6,8 @@
bool
select PPC_CELL
select PPC_DCR_MMIO
- select PPC_INDIRECT_IO
+ select PPC_INDIRECT_PIO
+ select PPC_INDIRECT_MMIO
select PPC_NATIVE
select PPC_RTAS
select IRQ_EDGE_EOI_HANDLER
@@ -15,6 +16,7 @@
bool
select PPC_CELL_COMMON
select MPIC
+ select PPC_IO_WORKAROUNDS
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
select IBM_NEW_EMAC_ZMII #test only
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 83fafe9..a4a8935 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -1,7 +1,7 @@
obj-$(CONFIG_PPC_CELL_COMMON) += cbe_regs.o interrupt.o pervasive.o
obj-$(CONFIG_PPC_CELL_NATIVE) += iommu.o setup.o spider-pic.o \
- pmu.o io-workarounds.o spider-pci.o
+ pmu.o spider-pci.o
obj-$(CONFIG_CBE_RAS) += ras.o
obj-$(CONFIG_CBE_THERM) += cbe_thermal.o
@@ -39,11 +39,10 @@
celleb_pci.o celleb_scc_epci.o \
celleb_scc_pciex.o \
celleb_scc_uhc.o \
- io-workarounds.o spider-pci.o \
- beat.o beat_htab.o beat_hvCall.o \
- beat_interrupt.o beat_iommu.o
+ spider-pci.o beat.o beat_htab.o \
+ beat_hvCall.o beat_interrupt.o \
+ beat_iommu.o
-obj-$(CONFIG_SMP) += beat_smp.o
obj-$(CONFIG_PPC_UDBG_BEAT) += beat_udbg.o
obj-$(CONFIG_SERIAL_TXX9) += celleb_scc_sio.o
obj-$(CONFIG_SPU_BASE) += beat_spu_priv1.o
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index bb5ebf8..ac06903 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -113,7 +113,7 @@
pr_devel("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
- if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+ if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) {
generic_handle_irq(msi);
msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
} else {
@@ -320,6 +320,7 @@
static int msic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
+ irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &msic_irq_chip, handle_simple_irq);
return 0;
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 4cb9e14..55015e1 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -148,16 +148,6 @@
}
/*
- * Update binding hardware IRQ number (hw) and Virtuql
- * IRQ number (virq). This is called only once for a given mapping.
- */
-static void beatic_pic_host_remap(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- beat_construct_and_connect_irq_plug(virq, hw);
-}
-
-/*
* Translate device-tree interrupt spec to irq_hw_number_t style (ulong),
* to pass away to irq_create_mapping().
*
@@ -184,7 +174,6 @@
static struct irq_host_ops beatic_pic_host_ops = {
.map = beatic_pic_host_map,
- .remap = beatic_pic_host_remap,
.unmap = beatic_pic_host_unmap,
.xlate = beatic_pic_host_xlate,
.match = beatic_pic_host_match,
@@ -257,22 +246,6 @@
irq_set_default_host(beatic_host);
}
-#ifdef CONFIG_SMP
-
-/* Nullified to compile with SMP mode */
-void beatic_setup_cpu(int cpu)
-{
-}
-
-void beatic_cause_IPI(int cpu, int mesg)
-{
-}
-
-void beatic_request_IPIs(void)
-{
-}
-#endif /* CONFIG_SMP */
-
void beatic_deinit_IRQ(void)
{
int i;
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.h b/arch/powerpc/platforms/cell/beat_interrupt.h
index b470fd0..a7e52f9 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.h
+++ b/arch/powerpc/platforms/cell/beat_interrupt.h
@@ -24,9 +24,6 @@
extern void beatic_init_IRQ(void);
extern unsigned int beatic_get_irq(void);
-extern void beatic_cause_IPI(int cpu, int mesg);
-extern void beatic_request_IPIs(void);
-extern void beatic_setup_cpu(int);
extern void beatic_deinit_IRQ(void);
#endif
diff --git a/arch/powerpc/platforms/cell/beat_smp.c b/arch/powerpc/platforms/cell/beat_smp.c
deleted file mode 100644
index 26efc20..0000000
--- a/arch/powerpc/platforms/cell/beat_smp.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * SMP support for Celleb platform. (Incomplete)
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/cell/smp.c:
- * Dave Engebretsen, Peter Bergner, and
- * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
- * Plus various changes from other IBM teams...
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/cpu.h>
-
-#include <asm/irq.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "beat_interrupt.h"
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
- */
-/* static cpumask_t of_spin_map; */
-
-/**
- * smp_startup_cpu() - start the given cpu
- *
- * At boot time, there is nothing to do for primary threads which were
- * started from Open Firmware. For anything else, call RTAS with the
- * appropriate start location.
- *
- * Returns:
- * 0 - failure
- * 1 - success
- */
-static inline int __devinit smp_startup_cpu(unsigned int lcpu)
-{
- return 0;
-}
-
-static void smp_beatic_message_pass(int target, int msg)
-{
- unsigned int i;
-
- if (target < NR_CPUS) {
- beatic_cause_IPI(target, msg);
- } else {
- for_each_online_cpu(i) {
- if (target == MSG_ALL_BUT_SELF
- && i == smp_processor_id())
- continue;
- beatic_cause_IPI(i, msg);
- }
- }
-}
-
-static int __init smp_beatic_probe(void)
-{
- return cpus_weight(cpu_possible_map);
-}
-
-static void __devinit smp_beatic_setup_cpu(int cpu)
-{
- beatic_setup_cpu(cpu);
-}
-
-static void __devinit smp_celleb_kick_cpu(int nr)
-{
- BUG_ON(nr < 0 || nr >= NR_CPUS);
-
- if (!smp_startup_cpu(nr))
- return;
-}
-
-static int smp_celleb_cpu_bootable(unsigned int nr)
-{
- return 1;
-}
-static struct smp_ops_t bpa_beatic_smp_ops = {
- .message_pass = smp_beatic_message_pass,
- .probe = smp_beatic_probe,
- .kick_cpu = smp_celleb_kick_cpu,
- .setup_cpu = smp_beatic_setup_cpu,
- .cpu_bootable = smp_celleb_cpu_bootable,
-};
-
-/* This is called very early */
-void __init smp_init_celleb(void)
-{
- DBG(" -> smp_init_celleb()\n");
-
- smp_ops = &bpa_beatic_smp_ops;
-
- DBG(" <- smp_init_celleb()\n");
-}
diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index dbc338f..f3917e7 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -45,8 +45,8 @@
unsigned int cbe_id;
} cbe_thread_map[NR_CPUS];
-static cpumask_t cbe_local_mask[MAX_CBE] = { [0 ... MAX_CBE-1] = CPU_MASK_NONE };
-static cpumask_t cbe_first_online_cpu = CPU_MASK_NONE;
+static cpumask_t cbe_local_mask[MAX_CBE] = { [0 ... MAX_CBE-1] = {CPU_BITS_NONE} };
+static cpumask_t cbe_first_online_cpu = { CPU_BITS_NONE };
static struct cbe_regs_map *cbe_find_map(struct device_node *np)
{
@@ -159,7 +159,8 @@
u32 cbe_node_to_cpu(int node)
{
- return find_first_bit( (unsigned long *) &cbe_local_mask[node], sizeof(cpumask_t));
+ return cpumask_first(&cbe_local_mask[node]);
+
}
EXPORT_SYMBOL_GPL(cbe_node_to_cpu);
@@ -268,9 +269,9 @@
thread->regs = map;
thread->cbe_id = cbe_id;
map->be_node = thread->be_node;
- cpu_set(i, cbe_local_mask[cbe_id]);
+ cpumask_set_cpu(i, &cbe_local_mask[cbe_id]);
if(thread->thread_id == 0)
- cpu_set(i, cbe_first_online_cpu);
+ cpumask_set_cpu(i, &cbe_first_online_cpu);
}
}
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index 404d1fc..5822141 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -41,7 +41,6 @@
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
-#include "io-workarounds.h"
#include "celleb_pci.h"
#define MAX_PCI_DEVICES 32
@@ -320,7 +319,7 @@
size = 256;
config = &private->fake_config[devno][fn];
- *config = alloc_maybe_bootmem(size, GFP_KERNEL);
+ *config = zalloc_maybe_bootmem(size, GFP_KERNEL);
if (*config == NULL) {
printk(KERN_ERR "PCI: "
"not enough memory for fake configuration space\n");
@@ -331,7 +330,7 @@
size = sizeof(struct celleb_pci_resource);
res = &private->res[devno][fn];
- *res = alloc_maybe_bootmem(size, GFP_KERNEL);
+ *res = zalloc_maybe_bootmem(size, GFP_KERNEL);
if (*res == NULL) {
printk(KERN_ERR
"PCI: not enough memory for resource data space\n");
@@ -432,7 +431,7 @@
static void __init celleb_alloc_private_mem(struct pci_controller *hose)
{
hose->private_data =
- alloc_maybe_bootmem(sizeof(struct celleb_pci_private),
+ zalloc_maybe_bootmem(sizeof(struct celleb_pci_private),
GFP_KERNEL);
}
@@ -469,18 +468,6 @@
},
};
-static int __init celleb_io_workaround_init(struct pci_controller *phb,
- struct celleb_phb_spec *phb_spec)
-{
- if (phb_spec->ops) {
- iowa_register_bus(phb, phb_spec->ops, phb_spec->iowa_init,
- phb_spec->iowa_data);
- io_workaround_init();
- }
-
- return 0;
-}
-
int __init celleb_setup_phb(struct pci_controller *phb)
{
struct device_node *dev = phb->dn;
@@ -500,7 +487,11 @@
if (rc)
return 1;
- return celleb_io_workaround_init(phb, phb_spec);
+ if (phb_spec->ops)
+ iowa_register_bus(phb, phb_spec->ops,
+ phb_spec->iowa_init,
+ phb_spec->iowa_data);
+ return 0;
}
int celleb_pci_probe_mode(struct pci_bus *bus)
diff --git a/arch/powerpc/platforms/cell/celleb_pci.h b/arch/powerpc/platforms/cell/celleb_pci.h
index 4cba152..a801fcc 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.h
+++ b/arch/powerpc/platforms/cell/celleb_pci.h
@@ -26,8 +26,9 @@
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/ppc-pci.h>
+#include <asm/io-workarounds.h>
-#include "io-workarounds.h"
+struct iowa_bus;
struct celleb_phb_spec {
int (*setup)(struct device_node *, struct pci_controller *);
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index e538455..d58d9ba 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -128,10 +128,6 @@
spu_management_ops = &spu_management_of_ops;
#endif
-#ifdef CONFIG_SMP
- smp_init_celleb();
-#endif
-
celleb_setup_arch_common();
}
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 44cfd1b..449c08c 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -196,8 +196,20 @@
{
int ipi = (int)(long)dev_id;
- smp_message_recv(ipi);
-
+ switch(ipi) {
+ case PPC_MSG_CALL_FUNCTION:
+ generic_smp_call_function_interrupt();
+ break;
+ case PPC_MSG_RESCHEDULE:
+ scheduler_ipi();
+ break;
+ case PPC_MSG_CALL_FUNC_SINGLE:
+ generic_smp_call_function_single_interrupt();
+ break;
+ case PPC_MSG_DEBUGGER_BREAK:
+ debug_ipi_action(0, NULL);
+ break;
+ }
return IRQ_HANDLED;
}
static void iic_request_ipi(int ipi, const char *name)
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
index d31c594..51e2901 100644
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -42,7 +42,6 @@
#include "interrupt.h"
#include "pervasive.h"
#include "ras.h"
-#include "io-workarounds.h"
static void qpace_show_cpuinfo(struct seq_file *m)
{
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index fd57bfe..c73cf4c 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -51,11 +51,11 @@
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/cell-regs.h>
+#include <asm/io-workarounds.h>
#include "interrupt.h"
#include "pervasive.h"
#include "ras.h"
-#include "io-workarounds.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -136,8 +136,6 @@
iowa_register_bus(phb, &spiderpci_ops, &spiderpci_iowa_init,
(void *)SPIDER_PCI_REG_BASE);
- io_workaround_init();
-
return 0;
}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index f774530..d176e61 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -77,7 +77,7 @@
unsigned int pcpu;
int start_cpu;
- if (cpu_isset(lcpu, of_spin_map))
+ if (cpumask_test_cpu(lcpu, &of_spin_map))
/* Already started by OF and sitting in spin loop */
return 1;
@@ -103,27 +103,11 @@
return 1;
}
-static void smp_iic_message_pass(int target, int msg)
-{
- unsigned int i;
-
- if (target < NR_CPUS) {
- iic_cause_IPI(target, msg);
- } else {
- for_each_online_cpu(i) {
- if (target == MSG_ALL_BUT_SELF
- && i == smp_processor_id())
- continue;
- iic_cause_IPI(i, msg);
- }
- }
-}
-
static int __init smp_iic_probe(void)
{
iic_request_IPIs();
- return cpus_weight(cpu_possible_map);
+ return cpumask_weight(cpu_possible_mask);
}
static void __devinit smp_cell_setup_cpu(int cpu)
@@ -137,12 +121,12 @@
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
-static void __devinit smp_cell_kick_cpu(int nr)
+static int __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
if (!smp_startup_cpu(nr))
- return;
+ return -ENOENT;
/*
* The processor is currently spinning, waiting for the
@@ -150,6 +134,8 @@
* the processor will continue on to secondary_start
*/
paca[nr].cpu_start = 1;
+
+ return 0;
}
static int smp_cell_cpu_bootable(unsigned int nr)
@@ -166,7 +152,7 @@
return 1;
}
static struct smp_ops_t bpa_iic_smp_ops = {
- .message_pass = smp_iic_message_pass,
+ .message_pass = iic_cause_IPI,
.probe = smp_iic_probe,
.kick_cpu = smp_cell_kick_cpu,
.setup_cpu = smp_cell_setup_cpu,
@@ -186,13 +172,12 @@
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
if (cpu_thread_in_core(i) == 0)
- cpu_set(i, of_spin_map);
+ cpumask_set_cpu(i, &of_spin_map);
}
- } else {
- of_spin_map = cpu_present_map;
- }
+ } else
+ cpumask_copy(&of_spin_map, cpu_present_mask);
- cpu_clear(boot_cpuid, of_spin_map);
+ cpumask_clear_cpu(boot_cpuid, &of_spin_map);
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index ca7731c..f1f7878 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -27,8 +27,7 @@
#include <asm/ppc-pci.h>
#include <asm/pci-bridge.h>
-
-#include "io-workarounds.h"
+#include <asm/io-workarounds.h>
#define SPIDER_PCI_DISABLE_PREFETCH
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index c5cf50e..442c28c 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -68,9 +68,9 @@
};
static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
-static struct spider_pic *spider_virq_to_pic(unsigned int virq)
+static struct spider_pic *spider_irq_data_to_pic(struct irq_data *d)
{
- return irq_map[virq].host->host_data;
+ return irq_data_get_irq_chip_data(d);
}
static void __iomem *spider_get_irq_config(struct spider_pic *pic,
@@ -81,24 +81,24 @@
static void spider_unmask_irq(struct irq_data *d)
{
- struct spider_pic *pic = spider_virq_to_pic(d->irq);
- void __iomem *cfg = spider_get_irq_config(pic, irq_map[d->irq].hwirq);
+ struct spider_pic *pic = spider_irq_data_to_pic(d);
+ void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d));
out_be32(cfg, in_be32(cfg) | 0x30000000u);
}
static void spider_mask_irq(struct irq_data *d)
{
- struct spider_pic *pic = spider_virq_to_pic(d->irq);
- void __iomem *cfg = spider_get_irq_config(pic, irq_map[d->irq].hwirq);
+ struct spider_pic *pic = spider_irq_data_to_pic(d);
+ void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d));
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
static void spider_ack_irq(struct irq_data *d)
{
- struct spider_pic *pic = spider_virq_to_pic(d->irq);
- unsigned int src = irq_map[d->irq].hwirq;
+ struct spider_pic *pic = spider_irq_data_to_pic(d);
+ unsigned int src = irqd_to_hwirq(d);
/* Reset edge detection logic if necessary
*/
@@ -116,8 +116,8 @@
static int spider_set_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
- struct spider_pic *pic = spider_virq_to_pic(d->irq);
- unsigned int hw = irq_map[d->irq].hwirq;
+ struct spider_pic *pic = spider_irq_data_to_pic(d);
+ unsigned int hw = irqd_to_hwirq(d);
void __iomem *cfg = spider_get_irq_config(pic, hw);
u32 old_mask;
u32 ic;
@@ -171,6 +171,7 @@
static int spider_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
+ irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &spider_pic, handle_level_irq);
/* Set default irq type */
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index acfacce..3675da7 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/linux_logo.h>
+#include <linux/syscore_ops.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/spu_csa.h>
@@ -521,18 +522,8 @@
}
EXPORT_SYMBOL_GPL(spu_init_channels);
-static int spu_shutdown(struct sys_device *sysdev)
-{
- struct spu *spu = container_of(sysdev, struct spu, sysdev);
-
- spu_free_irqs(spu);
- spu_destroy_spu(spu);
- return 0;
-}
-
static struct sysdev_class spu_sysdev_class = {
.name = "spu",
- .shutdown = spu_shutdown,
};
int spu_add_sysdev_attr(struct sysdev_attribute *attr)
@@ -797,6 +788,22 @@
}
#endif
+static void spu_shutdown(void)
+{
+ struct spu *spu;
+
+ mutex_lock(&spu_full_list_mutex);
+ list_for_each_entry(spu, &spu_full_list, full_list) {
+ spu_free_irqs(spu);
+ spu_destroy_spu(spu);
+ }
+ mutex_unlock(&spu_full_list_mutex);
+}
+
+static struct syscore_ops spu_syscore_ops = {
+ .shutdown = spu_shutdown,
+};
+
static int __init init_spu_base(void)
{
int i, ret = 0;
@@ -830,6 +837,7 @@
crash_register_spus(&spu_full_list);
mutex_unlock(&spu_full_list_mutex);
spu_add_sysdev_attr(&attr_stat);
+ register_syscore_ops(&spu_syscore_ops);
spu_init_affinity();
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 6520385..32cb4e6 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -141,7 +141,7 @@
* runqueue. The context will be rescheduled on the proper node
* if it is timesliced or preempted.
*/
- ctx->cpus_allowed = current->cpus_allowed;
+ cpumask_copy(&ctx->cpus_allowed, tsk_cpus_allowed(current));
/* Save the current cpu id for spu interrupt routing. */
ctx->last_ran = raw_smp_processor_id();
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 02cafec..a800122 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -30,10 +30,12 @@
#include <asm/mpic.h>
#include <asm/rtas.h>
-static void __devinit smp_chrp_kick_cpu(int nr)
+static int __devinit smp_chrp_kick_cpu(int nr)
{
*(unsigned long *)KERNELBASE = nr;
asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
+
+ return 0;
}
static void __devinit smp_chrp_setup_cpu(int cpu_nr)
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index 12aa62b..f61a2dd 100644
--- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -48,7 +48,7 @@
static void flipper_pic_mask_and_ack(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
u32 mask = 1 << irq;
@@ -59,7 +59,7 @@
static void flipper_pic_ack(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
/* this is at least needed for RSW */
@@ -68,7 +68,7 @@
static void flipper_pic_mask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
clrbits32(io_base + FLIPPER_IMR, 1 << irq);
@@ -76,7 +76,7 @@
static void flipper_pic_unmask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
setbits32(io_base + FLIPPER_IMR, 1 << irq);
@@ -107,12 +107,6 @@
return 0;
}
-static void flipper_pic_unmap(struct irq_host *h, unsigned int irq)
-{
- irq_set_chip_data(irq, NULL);
- irq_set_chip(irq, NULL);
-}
-
static int flipper_pic_match(struct irq_host *h, struct device_node *np)
{
return 1;
@@ -121,7 +115,6 @@
static struct irq_host_ops flipper_irq_host_ops = {
.map = flipper_pic_map,
- .unmap = flipper_pic_unmap,
.match = flipper_pic_match,
};
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 2bdddfc..e491917 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -43,7 +43,7 @@
static void hlwd_pic_mask_and_ack(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
u32 mask = 1 << irq;
@@ -53,7 +53,7 @@
static void hlwd_pic_ack(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
out_be32(io_base + HW_BROADWAY_ICR, 1 << irq);
@@ -61,7 +61,7 @@
static void hlwd_pic_mask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
@@ -69,7 +69,7 @@
static void hlwd_pic_unmask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void __iomem *io_base = irq_data_get_irq_chip_data(d);
setbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
@@ -100,15 +100,8 @@
return 0;
}
-static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq)
-{
- irq_set_chip_data(irq, NULL);
- irq_set_chip(irq, NULL);
-}
-
static struct irq_host_ops hlwd_irq_host_ops = {
.map = hlwd_pic_map,
- .unmap = hlwd_pic_unmap,
};
static unsigned int __hlwd_pic_get_irq(struct irq_host *h)
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index e5bc9f7..b57cda3 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -1,7 +1,9 @@
config PPC_ISERIES
bool "IBM Legacy iSeries"
depends on PPC64 && PPC_BOOK3S
- select PPC_INDIRECT_IO
+ select PPC_SMP_MUXED_IPI
+ select PPC_INDIRECT_PIO
+ select PPC_INDIRECT_MMIO
select PPC_PCI_CHOICE if EXPERT
menu "iSeries device drivers"
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 32a56c6..29c02f3 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -31,6 +31,7 @@
#include <asm/thread_info.h>
#include <asm/ptrace.h>
#include <asm/cputable.h>
+#include <asm/mmu.h>
#include "exception.h"
@@ -60,29 +61,31 @@
/* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
/* In the UP case we'll yield() later, and we will not access the paca anyway */
#ifdef CONFIG_SMP
-1:
+iSeries_secondary_wait_paca:
HMT_LOW
LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
ld r23,0(r23)
- sync
- LOAD_REG_ADDR(r3,current_set)
- sldi r28,r24,3 /* get current_set[cpu#] */
- ldx r3,r3,r28
- addi r1,r3,THREAD_SIZE
- subi r1,r1,STACK_FRAME_OVERHEAD
- cmpwi 0,r23,0 /* Keep poking the Hypervisor until */
- bne 2f /* we're released */
- /* Let the Hypervisor know we are alive */
+ cmpdi 0,r23,0
+ bne 2f /* go on when the master is ready */
+
+ /* Keep poking the Hypervisor until we're released */
/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
lis r3,0x8002
rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
li r0,-1 /* r0=-1 indicates a Hypervisor call */
sc /* Invoke the hypervisor via a system call */
- b 1b
-#endif
+ b iSeries_secondary_wait_paca
2:
+ HMT_MEDIUM
+ sync
+
+ LOAD_REG_ADDR(r3, nr_cpu_ids) /* get number of pacas allocated */
+ lwz r3,0(r3) /* nr_cpus= or NR_CPUS can limit */
+ cmpld 0,r24,r3 /* is our cpu number allocated? */
+ bge iSeries_secondary_yield /* no, yield forever */
+
/* Load our paca now that it's been allocated */
LOAD_REG_ADDR(r13, paca)
ld r13,0(r13)
@@ -93,10 +96,24 @@
ori r23,r23,MSR_RI
mtmsrd r23 /* RI on */
- HMT_LOW
-#ifdef CONFIG_SMP
+iSeries_secondary_smp_loop:
lbz r23,PACAPROCSTART(r13) /* Test if this processor
* should start */
+ cmpwi 0,r23,0
+ bne 3f /* go on when we are told */
+
+ HMT_LOW
+ /* Let the Hypervisor know we are alive */
+ /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
+ lis r3,0x8002
+ rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
+ li r0,-1 /* r0=-1 indicates a Hypervisor call */
+ sc /* Invoke the hypervisor via a system call */
+ mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */
+ b iSeries_secondary_smp_loop /* wait for signal to start */
+
+3:
+ HMT_MEDIUM
sync
LOAD_REG_ADDR(r3,current_set)
sldi r28,r24,3 /* get current_set[cpu#] */
@@ -104,27 +121,22 @@
addi r1,r3,THREAD_SIZE
subi r1,r1,STACK_FRAME_OVERHEAD
- cmpwi 0,r23,0
- beq iSeries_secondary_smp_loop /* Loop until told to go */
b __secondary_start /* Loop until told to go */
-iSeries_secondary_smp_loop:
- /* Let the Hypervisor know we are alive */
- /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
- lis r3,0x8002
- rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
-#else /* CONFIG_SMP */
+#endif /* CONFIG_SMP */
+
+iSeries_secondary_yield:
/* Yield the processor. This is required for non-SMP kernels
which are running on multi-threaded machines. */
+ HMT_LOW
lis r3,0x8000
rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
li r4,0 /* "yield timed" */
li r5,-1 /* "yield forever" */
-#endif /* CONFIG_SMP */
li r0,-1 /* r0=-1 indicates a Hypervisor call */
sc /* Invoke the hypervisor via a system call */
mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */
- b 2b /* If SMP not configured, secondaries
+ b iSeries_secondary_yield /* If SMP not configured, secondaries
* loop forever */
/*** ISeries-LPAR interrupt handlers ***/
@@ -157,7 +169,7 @@
FTR_SECTION_ELSE
EXCEPTION_PROLOG_1(PACA_EXGEN)
EXCEPTION_PROLOG_ISERIES_1
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB)
b data_access_common
.do_stab_bolted_iSeries:
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 52a6889..b210345 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -42,7 +42,6 @@
#include "irq.h"
#include "pci.h"
#include "call_pci.h"
-#include "smp.h"
#ifdef CONFIG_PCI
@@ -171,7 +170,7 @@
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
@@ -188,7 +187,7 @@
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
@@ -234,7 +233,7 @@
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
/* irq should be locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
@@ -257,7 +256,7 @@
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
@@ -271,7 +270,7 @@
static void iseries_end_IRQ(struct irq_data *d)
{
- unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
(REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
@@ -316,7 +315,7 @@
#ifdef CONFIG_SMP
if (get_lppaca()->int_dword.fields.ipi_cnt) {
get_lppaca()->int_dword.fields.ipi_cnt = 0;
- iSeries_smp_message_recv();
+ smp_ipi_demux();
}
#endif /* CONFIG_SMP */
if (hvlpevent_is_pending())
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 2946ae1..c25a081 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -249,7 +249,7 @@
unsigned long i;
unsigned long mem_blocks = 0;
- if (cpu_has_feature(CPU_FTR_SLB))
+ if (mmu_has_feature(MMU_FTR_SLB))
mem_blocks = iSeries_process_Regatta_mainstore_vpd(mb_array,
max_entries);
else
@@ -634,7 +634,7 @@
hpte_init_iSeries();
/* iSeries does not support 16M pages */
- cur_cpu_spec->cpu_features &= ~CPU_FTR_16M_PAGE;
+ cur_cpu_spec->mmu_features &= ~MMU_FTR_16M_PAGE;
return 1;
}
@@ -685,6 +685,11 @@
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
+#ifdef CONFIG_SMP
+ /* On iSeries we know we can never have more than 64 cpus */
+ nr_cpu_ids = max(nr_cpu_ids, 64);
+#endif
+
iSeries_fixup_klimit();
/*
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 6c60299..e3265ad 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -42,57 +42,23 @@
#include <asm/cputable.h>
#include <asm/system.h>
-#include "smp.h"
-
-static unsigned long iSeries_smp_message[NR_CPUS];
-
-void iSeries_smp_message_recv(void)
+static void smp_iSeries_cause_ipi(int cpu, unsigned long data)
{
- int cpu = smp_processor_id();
- int msg;
-
- if (num_online_cpus() < 2)
- return;
-
- for (msg = 0; msg < 4; msg++)
- if (test_and_clear_bit(msg, &iSeries_smp_message[cpu]))
- smp_message_recv(msg);
-}
-
-static inline void smp_iSeries_do_message(int cpu, int msg)
-{
- set_bit(msg, &iSeries_smp_message[cpu]);
HvCall_sendIPI(&(paca[cpu]));
}
-static void smp_iSeries_message_pass(int target, int msg)
-{
- int i;
-
- if (target < NR_CPUS)
- smp_iSeries_do_message(target, msg);
- else {
- for_each_online_cpu(i) {
- if ((target == MSG_ALL_BUT_SELF) &&
- (i == smp_processor_id()))
- continue;
- smp_iSeries_do_message(i, msg);
- }
- }
-}
-
static int smp_iSeries_probe(void)
{
return cpumask_weight(cpu_possible_mask);
}
-static void smp_iSeries_kick_cpu(int nr)
+static int smp_iSeries_kick_cpu(int nr)
{
BUG_ON((nr < 0) || (nr >= NR_CPUS));
/* Verify that our partition has a processor nr */
if (lppaca_of(nr).dyn_proc_status >= 2)
- return;
+ return -ENOENT;
/* The processor is currently spinning, waiting
* for the cpu_start field to become non-zero
@@ -100,6 +66,8 @@
* continue on to secondary_start in iSeries_head.S
*/
paca[nr].cpu_start = 1;
+
+ return 0;
}
static void __devinit smp_iSeries_setup_cpu(int nr)
@@ -107,7 +75,8 @@
}
static struct smp_ops_t iSeries_smp_ops = {
- .message_pass = smp_iSeries_message_pass,
+ .message_pass = smp_muxed_ipi_message_pass,
+ .cause_ipi = smp_iSeries_cause_ipi,
.probe = smp_iSeries_probe,
.kick_cpu = smp_iSeries_kick_cpu,
.setup_cpu = smp_iSeries_setup_cpu,
diff --git a/arch/powerpc/platforms/iseries/smp.h b/arch/powerpc/platforms/iseries/smp.h
deleted file mode 100644
index d501f7d..0000000
--- a/arch/powerpc/platforms/iseries/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _PLATFORMS_ISERIES_SMP_H
-#define _PLATFORMS_ISERIES_SMP_H
-
-extern void iSeries_smp_message_recv(void);
-
-#endif /* _PLATFORMS_ISERIES_SMP_H */
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 1e1a087..1afd10f 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -18,4 +18,13 @@
select PPC_970_NAP
default y
-
+config PPC_PMAC32_PSURGE
+ bool "Support for powersurge upgrade cards" if EXPERT
+ depends on SMP && PPC32 && PPC_PMAC
+ select PPC_SMP_MUXED_IPI
+ default y
+ help
+ The powersurge cpu boards can be used in the generation
+ of powermacs that have a socket for an upgradeable cpu card,
+ including the 7500, 8500, 9500, 9600. Support exists for
+ both dual and quad socket upgrade cards.
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 023f240..9089b04 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -21,7 +21,7 @@
#include <linux/signal.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/module.h>
@@ -84,7 +84,7 @@
static void pmac_mask_and_ack_irq(struct irq_data *d)
{
- unsigned int src = irq_map[d->irq].hwirq;
+ unsigned int src = irqd_to_hwirq(d);
unsigned long bit = 1UL << (src & 0x1f);
int i = src >> 5;
unsigned long flags;
@@ -106,7 +106,7 @@
static void pmac_ack_irq(struct irq_data *d)
{
- unsigned int src = irq_map[d->irq].hwirq;
+ unsigned int src = irqd_to_hwirq(d);
unsigned long bit = 1UL << (src & 0x1f);
int i = src >> 5;
unsigned long flags;
@@ -152,7 +152,7 @@
static unsigned int pmac_startup_irq(struct irq_data *d)
{
unsigned long flags;
- unsigned int src = irq_map[d->irq].hwirq;
+ unsigned int src = irqd_to_hwirq(d);
unsigned long bit = 1UL << (src & 0x1f);
int i = src >> 5;
@@ -169,7 +169,7 @@
static void pmac_mask_irq(struct irq_data *d)
{
unsigned long flags;
- unsigned int src = irq_map[d->irq].hwirq;
+ unsigned int src = irqd_to_hwirq(d);
raw_spin_lock_irqsave(&pmac_pic_lock, flags);
__clear_bit(src, ppc_cached_irq_mask);
@@ -180,7 +180,7 @@
static void pmac_unmask_irq(struct irq_data *d)
{
unsigned long flags;
- unsigned int src = irq_map[d->irq].hwirq;
+ unsigned int src = irqd_to_hwirq(d);
raw_spin_lock_irqsave(&pmac_pic_lock, flags);
__set_bit(src, ppc_cached_irq_mask);
@@ -193,7 +193,7 @@
unsigned long flags;
raw_spin_lock_irqsave(&pmac_pic_lock, flags);
- __pmac_retrigger(irq_map[d->irq].hwirq);
+ __pmac_retrigger(irqd_to_hwirq(d));
raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
return 1;
}
@@ -239,15 +239,12 @@
unsigned long bits = 0;
unsigned long flags;
-#ifdef CONFIG_SMP
- void psurge_smp_message_recv(void);
-
- /* IPI's are a hack on the powersurge -- Cort */
- if ( smp_processor_id() != 0 ) {
- psurge_smp_message_recv();
- return NO_IRQ_IGNORE; /* ignore, already handled */
+#ifdef CONFIG_PPC_PMAC32_PSURGE
+ /* IPI's are a hack on the powersurge -- Cort */
+ if (smp_processor_id() != 0) {
+ return psurge_secondary_virq;
}
-#endif /* CONFIG_SMP */
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
raw_spin_lock_irqsave(&pmac_pic_lock, flags);
for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
int i = irq >> 5;
@@ -677,7 +674,7 @@
return viaint;
}
-static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+static int pmacpic_suspend(void)
{
int viaint = pmacpic_find_viaint();
@@ -698,7 +695,7 @@
return 0;
}
-static int pmacpic_resume(struct sys_device *sysdev)
+static void pmacpic_resume(void)
{
int i;
@@ -709,39 +706,19 @@
for (i = 0; i < max_real_irqs; ++i)
if (test_bit(i, sleep_save_mask))
pmac_unmask_irq(irq_get_irq_data(i));
-
- return 0;
}
-#endif /* CONFIG_PM && CONFIG_PPC32 */
-
-static struct sysdev_class pmacpic_sysclass = {
- .name = "pmac_pic",
+static struct syscore_ops pmacpic_syscore_ops = {
+ .suspend = pmacpic_suspend,
+ .resume = pmacpic_resume,
};
-static struct sys_device device_pmacpic = {
- .id = 0,
- .cls = &pmacpic_sysclass,
-};
-
-static struct sysdev_driver driver_pmacpic = {
-#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
- .suspend = &pmacpic_suspend,
- .resume = &pmacpic_resume,
-#endif /* CONFIG_PM && CONFIG_PPC32 */
-};
-
-static int __init init_pmacpic_sysfs(void)
+static int __init init_pmacpic_syscore(void)
{
-#ifdef CONFIG_PPC32
- if (max_irqs == 0)
- return -ENODEV;
-#endif
- printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
- sysdev_class_register(&pmacpic_sysclass);
- sysdev_register(&device_pmacpic);
- sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+ register_syscore_ops(&pmacpic_syscore_ops);
return 0;
}
-machine_subsys_initcall(powermac, init_pmacpic_sysfs);
+machine_subsys_initcall(powermac, init_pmacpic_syscore);
+
+#endif /* CONFIG_PM && CONFIG_PPC32 */
diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h
deleted file mode 100644
index d622a83..0000000
--- a/arch/powerpc/platforms/powermac/pic.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __PPC_PLATFORMS_PMAC_PIC_H
-#define __PPC_PLATFORMS_PMAC_PIC_H
-
-#include <linux/irq.h>
-
-extern struct irq_chip pmac_pic;
-
-extern void pmac_pic_init(void);
-extern int pmac_get_irq(void);
-
-#endif /* __PPC_PLATFORMS_PMAC_PIC_H */
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 20468f4..8327cce2 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -33,6 +33,7 @@
extern void pmac_check_ht_link(void);
extern void pmac_setup_smp(void);
+extern int psurge_secondary_virq;
extern void low_cpu_die(void) __attribute__((noreturn));
extern int pmac_nvram_init(void);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index bc5f0dc..db092d7 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -70,7 +70,7 @@
static u64 timebase;
static int tb_req;
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_PMAC32_PSURGE
/*
* Powersurge (old powermac SMP) support.
@@ -124,6 +124,10 @@
/* what sort of powersurge board we have */
static int psurge_type = PSURGE_NONE;
+/* irq for secondary cpus to report */
+static struct irq_host *psurge_host;
+int psurge_secondary_virq;
+
/*
* Set and clear IPIs for powersurge.
*/
@@ -156,51 +160,52 @@
/*
* On powersurge (old SMP powermac architecture) we don't have
* separate IPIs for separate messages like openpic does. Instead
- * we have a bitmap for each processor, where a 1 bit means that
- * the corresponding message is pending for that processor.
- * Ideally each cpu's entry would be in a different cache line.
+ * use the generic demux helpers
* -- paulus.
*/
-static unsigned long psurge_smp_message[NR_CPUS];
-
-void psurge_smp_message_recv(void)
+static irqreturn_t psurge_ipi_intr(int irq, void *d)
{
- int cpu = smp_processor_id();
- int msg;
+ psurge_clr_ipi(smp_processor_id());
+ smp_ipi_demux();
- /* clear interrupt */
- psurge_clr_ipi(cpu);
-
- if (num_online_cpus() < 2)
- return;
-
- /* make sure there is a message there */
- for (msg = 0; msg < 4; msg++)
- if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
- smp_message_recv(msg);
-}
-
-irqreturn_t psurge_primary_intr(int irq, void *d)
-{
- psurge_smp_message_recv();
return IRQ_HANDLED;
}
-static void smp_psurge_message_pass(int target, int msg)
+static void smp_psurge_cause_ipi(int cpu, unsigned long data)
{
- int i;
+ psurge_set_ipi(cpu);
+}
- if (num_online_cpus() < 2)
- return;
+static int psurge_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq);
- for_each_online_cpu(i) {
- if (target == MSG_ALL
- || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
- || target == i) {
- set_bit(msg, &psurge_smp_message[i]);
- psurge_set_ipi(i);
- }
- }
+ return 0;
+}
+
+struct irq_host_ops psurge_host_ops = {
+ .map = psurge_host_map,
+};
+
+static int psurge_secondary_ipi_init(void)
+{
+ int rc = -ENOMEM;
+
+ psurge_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
+ &psurge_host_ops, 0);
+
+ if (psurge_host)
+ psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
+
+ if (psurge_secondary_virq)
+ rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
+ IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+
+ if (rc)
+ pr_err("Failed to setup secondary cpu IPI\n");
+
+ return rc;
}
/*
@@ -311,6 +316,9 @@
ncpus = 2;
}
+ if (psurge_secondary_ipi_init())
+ return 1;
+
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
@@ -329,7 +337,7 @@
return ncpus;
}
-static void __init smp_psurge_kick_cpu(int nr)
+static int __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
unsigned long a, flags;
@@ -394,11 +402,13 @@
psurge_set_ipi(1);
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+
+ return 0;
}
static struct irqaction psurge_irqaction = {
- .handler = psurge_primary_intr,
- .flags = IRQF_DISABLED,
+ .handler = psurge_ipi_intr,
+ .flags = IRQF_DISABLED|IRQF_PERCPU,
.name = "primary IPI",
};
@@ -437,14 +447,15 @@
/* PowerSurge-style Macs */
struct smp_ops_t psurge_smp_ops = {
- .message_pass = smp_psurge_message_pass,
+ .message_pass = smp_muxed_ipi_message_pass,
+ .cause_ipi = smp_psurge_cause_ipi,
.probe = smp_psurge_probe,
.kick_cpu = smp_psurge_kick_cpu,
.setup_cpu = smp_psurge_setup_cpu,
.give_timebase = smp_psurge_give_timebase,
.take_timebase = smp_psurge_take_timebase,
};
-#endif /* CONFIG_PPC32 - actually powersurge support */
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
/*
* Core 99 and later support
@@ -791,14 +802,14 @@
return ncpus;
}
-static void __devinit smp_core99_kick_cpu(int nr)
+static int __devinit smp_core99_kick_cpu(int nr)
{
unsigned int save_vector;
unsigned long target, flags;
unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
if (nr < 0 || nr > 3)
- return;
+ return -ENOENT;
if (ppc_md.progress)
ppc_md.progress("smp_core99_kick_cpu", 0x346);
@@ -830,6 +841,8 @@
local_irq_restore(flags);
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+
+ return 0;
}
static void __devinit smp_core99_setup_cpu(int cpu_nr)
@@ -1002,7 +1015,7 @@
of_node_put(np);
smp_ops = &core99_smp_ops;
}
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_PMAC32_PSURGE
else {
/* We have to set bits in cpu_possible_mask here since the
* secondary CPU(s) aren't in the device tree. Various
@@ -1015,7 +1028,7 @@
set_cpu_possible(cpu, true);
smp_ops = &psurge_smp_ops;
}
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
#ifdef CONFIG_HOTPLUG_CPU
ppc_md.cpu_die = pmac_cpu_die;
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index f2f6413..600ed2c 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -197,7 +197,7 @@
result = irq_set_chip_data(*virq, pd);
if (result) {
- pr_debug("%s:%d: set_irq_chip_data failed\n",
+ pr_debug("%s:%d: irq_set_chip_data failed\n",
__func__, __LINE__);
goto fail_set;
}
@@ -659,11 +659,6 @@
static void dump_bmp(struct ps3_private* pd) {};
#endif /* defined(DEBUG) */
-static void ps3_host_unmap(struct irq_host *h, unsigned int virq)
-{
- irq_set_chip_data(virq, NULL);
-}
-
static int ps3_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
@@ -683,7 +678,6 @@
static struct irq_host_ops ps3_host_ops = {
.map = ps3_host_map,
- .unmap = ps3_host_unmap,
.match = ps3_host_match,
};
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index 51ffde4..4c44794 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -39,7 +39,7 @@
#define MSG_COUNT 4
static DEFINE_PER_CPU(unsigned int [MSG_COUNT], ps3_ipi_virqs);
-static void do_message_pass(int target, int msg)
+static void ps3_smp_message_pass(int cpu, int msg)
{
int result;
unsigned int virq;
@@ -49,28 +49,12 @@
return;
}
- virq = per_cpu(ps3_ipi_virqs, target)[msg];
+ virq = per_cpu(ps3_ipi_virqs, cpu)[msg];
result = ps3_send_event_locally(virq);
if (result)
DBG("%s:%d: ps3_send_event_locally(%d, %d) failed"
- " (%d)\n", __func__, __LINE__, target, msg, result);
-}
-
-static void ps3_smp_message_pass(int target, int msg)
-{
- int cpu;
-
- if (target < NR_CPUS)
- do_message_pass(target, msg);
- else if (target == MSG_ALL_BUT_SELF) {
- for_each_online_cpu(cpu)
- if (cpu != smp_processor_id())
- do_message_pass(cpu, msg);
- } else {
- for_each_online_cpu(cpu)
- do_message_pass(cpu, msg);
- }
+ " (%d)\n", __func__, __LINE__, cpu, msg, result);
}
static int ps3_smp_probe(void)
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 39a472e..375a9f9 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -197,7 +197,7 @@
* The current HV requires the spu shadow regs to be mapped with the
* PTE page protection bits set as read-only (PP=3). This implementation
* uses the low level __ioremap() to bypass the page protection settings
- * inforced by ioremap_flags() to get the needed PTE bits set for the
+ * inforced by ioremap_prot() to get the needed PTE bits set for the
* shadow regs.
*/
@@ -214,7 +214,7 @@
goto fail_ioremap;
}
- spu->local_store = (__force void *)ioremap_flags(spu->local_store_phys,
+ spu->local_store = (__force void *)ioremap_prot(spu->local_store_phys,
LS_SIZE, _PAGE_NO_CACHE);
if (!spu->local_store) {
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 5b3da4b..71af4c5d 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -3,7 +3,10 @@
bool "IBM pSeries & new (POWER5-based) iSeries"
select MPIC
select PCI_MSI
- select XICS
+ select PPC_XICS
+ select PPC_ICP_NATIVE
+ select PPC_ICP_HV
+ select PPC_ICS_RTAS
select PPC_I8259
select PPC_RTAS
select PPC_RTAS_DAEMON
@@ -47,6 +50,24 @@
tristate "Scanlog dump interface"
depends on RTAS_PROC && PPC_PSERIES
+config IO_EVENT_IRQ
+ bool "IO Event Interrupt support"
+ depends on PPC_PSERIES
+ default y
+ help
+ Select this option, if you want to enable support for IO Event
+ interrupts. IO event interrupt is a mechanism provided by RTAS
+ to return information about hardware error and non-error events
+ which may need OS attention. RTAS returns events for multiple
+ event types and scopes. Device drivers can register their handlers
+ to receive events.
+
+ This option will only enable the IO event platform code. You
+ will still need to enable or compile the actual drivers
+ that use this infrastruture to handle IO event interrupts.
+
+ Say Y if you are unsure.
+
config LPARCFG
bool "LPAR Configuration Data"
depends on PPC_PSERIES || PPC_ISERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index fc52378..3556e40 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -5,7 +5,6 @@
setup.o iommu.o event_sources.o ras.o \
firmware.o power.o dlpar.o mobility.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o
obj-$(CONFIG_KEXEC) += kexec.o
@@ -22,6 +21,7 @@
obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_DTL) += dtl.o
+obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
ifeq ($(CONFIG_PPC_PSERIES),y)
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index c371bc0..e919007 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -52,10 +52,10 @@
/*
- * Size of per-cpu log buffers. Default is just under 16 pages worth.
+ * Size of per-cpu log buffers. Firmware requires that the buffer does
+ * not cross a 4k boundary.
*/
-static int dtl_buf_entries = (16 * 85);
-
+static int dtl_buf_entries = N_DISPATCH_LOG;
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
struct dtl_ring {
@@ -151,7 +151,7 @@
/* Register our dtl buffer with the hypervisor. The HV expects the
* buffer size to be passed in the second word of the buffer */
- ((u32 *)dtl->buf)[1] = dtl->buf_entries * sizeof(struct dtl_entry);
+ ((u32 *)dtl->buf)[1] = DISPATCH_LOG_BYTES;
hwcpu = get_hard_smp_processor_id(dtl->cpu);
addr = __pa(dtl->buf);
@@ -196,13 +196,15 @@
long int rc;
struct dtl_entry *buf = NULL;
+ if (!dtl_cache)
+ return -ENOMEM;
+
/* only allow one reader */
if (dtl->buf)
return -EBUSY;
n_entries = dtl_buf_entries;
- buf = kmalloc_node(n_entries * sizeof(struct dtl_entry),
- GFP_KERNEL, cpu_to_node(dtl->cpu));
+ buf = kmem_cache_alloc_node(dtl_cache, GFP_KERNEL, cpu_to_node(dtl->cpu));
if (!buf) {
printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n",
__func__, dtl->cpu);
@@ -223,7 +225,7 @@
spin_unlock(&dtl->lock);
if (rc)
- kfree(buf);
+ kmem_cache_free(dtl_cache, buf);
return rc;
}
@@ -231,7 +233,7 @@
{
spin_lock(&dtl->lock);
dtl_stop(dtl);
- kfree(dtl->buf);
+ kmem_cache_free(dtl_cache, dtl->buf);
dtl->buf = NULL;
dtl->buf_entries = 0;
spin_unlock(&dtl->lock);
@@ -365,7 +367,7 @@
event_mask_file = debugfs_create_x8("dtl_event_mask", 0600,
dtl_dir, &dtl_event_mask);
- buf_entries_file = debugfs_create_u32("dtl_buf_entries", 0600,
+ buf_entries_file = debugfs_create_u32("dtl_buf_entries", 0400,
dtl_dir, &dtl_buf_entries);
if (!event_mask_file || !buf_entries_file) {
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 8964917..46b55cf 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -93,6 +93,7 @@
static int ibm_get_config_addr_info;
static int ibm_get_config_addr_info2;
static int ibm_configure_bridge;
+static int ibm_configure_pe;
int eeh_subsystem_enabled;
EXPORT_SYMBOL(eeh_subsystem_enabled);
@@ -261,6 +262,8 @@
pci_regs_buf[0] = 0;
rtas_pci_enable(pdn, EEH_THAW_MMIO);
+ rtas_configure_bridge(pdn);
+ eeh_restore_bars(pdn);
loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen);
@@ -448,6 +451,39 @@
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
}
+void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
+{
+ struct device_node *dn;
+
+ for_each_child_of_node(parent, dn) {
+ if (PCI_DN(dn)) {
+
+ struct pci_dev *dev = PCI_DN(dn)->pcidev;
+
+ if (dev && dev->driver)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+ }
+ }
+}
+
+void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
+{
+ struct pci_dev *dev;
+ dn = find_device_pe(dn);
+
+ /* Back up one, since config addrs might be shared */
+ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ dn = dn->parent;
+
+ dev = PCI_DN(dn)->pcidev;
+ if (dev)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+}
+
/**
* eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
* @dn device node
@@ -692,15 +728,24 @@
if (pdn->eeh_pe_config_addr)
config_addr = pdn->eeh_pe_config_addr;
- rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
+ rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
config_addr,
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid),
state);
- if (rc)
- printk (KERN_WARNING "EEH: Unable to reset the failed slot,"
- " (%d) #RST=%d dn=%s\n",
- rc, state, pdn->node->full_name);
+
+ /* Fundamental-reset not supported on this PE, try hot-reset */
+ if (rc == -8 && state == 3) {
+ rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr,
+ BUID_HI(pdn->phb->buid),
+ BUID_LO(pdn->phb->buid), 1);
+ if (rc)
+ printk(KERN_WARNING
+ "EEH: Unable to reset the failed slot,"
+ " #RST=%d dn=%s\n",
+ rc, pdn->node->full_name);
+ }
}
/**
@@ -736,18 +781,21 @@
/**
* rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
* @pdn: pci device node to be reset.
- *
- * Return 0 if success, else a non-zero value.
*/
static void __rtas_set_slot_reset(struct pci_dn *pdn)
{
- struct pci_dev *dev = pdn->pcidev;
+ unsigned int freset = 0;
- /* Determine type of EEH reset required by device,
- * default hot reset or fundamental reset
- */
- if (dev && dev->needs_freset)
+ /* Determine type of EEH reset required for
+ * Partitionable Endpoint, a hot-reset (1)
+ * or a fundamental reset (3).
+ * A fundamental reset required by any device under
+ * Partitionable Endpoint trumps hot-reset.
+ */
+ eeh_set_pe_freset(pdn->node, &freset);
+
+ if (freset)
rtas_pci_slot_reset(pdn, 3);
else
rtas_pci_slot_reset(pdn, 1);
@@ -895,13 +943,20 @@
{
int config_addr;
int rc;
+ int token;
/* Use PE configuration address, if present */
config_addr = pdn->eeh_config_addr;
if (pdn->eeh_pe_config_addr)
config_addr = pdn->eeh_pe_config_addr;
- rc = rtas_call(ibm_configure_bridge,3,1, NULL,
+ /* Use new configure-pe function, if supported */
+ if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE)
+ token = ibm_configure_pe;
+ else
+ token = ibm_configure_bridge;
+
+ rc = rtas_call(token, 3, 1, NULL,
config_addr,
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid));
@@ -1077,6 +1132,7 @@
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
+ ibm_configure_pe = rtas_token("ibm,configure-pe");
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
return;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index b8d70f5..1b6cb10 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -328,7 +328,7 @@
struct pci_bus *frozen_bus;
int rc = 0;
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
- const char *location, *pci_str, *drv_str;
+ const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str;
frozen_dn = find_device_pe(event->dn);
if (!frozen_dn) {
@@ -364,13 +364,8 @@
frozen_pdn = PCI_DN(frozen_dn);
frozen_pdn->eeh_freeze_count++;
- if (frozen_pdn->pcidev) {
- pci_str = pci_name (frozen_pdn->pcidev);
- drv_str = pcid_name (frozen_pdn->pcidev);
- } else {
- pci_str = eeh_pci_name(event->dev);
- drv_str = pcid_name (event->dev);
- }
+ pci_str = eeh_pci_name(event->dev);
+ drv_str = pcid_name(event->dev);
if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
goto excess_failures;
@@ -378,8 +373,17 @@
printk(KERN_WARNING
"EEH: This PCI device has failed %d times in the last hour:\n",
frozen_pdn->eeh_freeze_count);
+
+ if (frozen_pdn->pcidev) {
+ bus_pci_str = pci_name(frozen_pdn->pcidev);
+ bus_drv_str = pcid_name(frozen_pdn->pcidev);
+ printk(KERN_WARNING
+ "EEH: Bus location=%s driver=%s pci addr=%s\n",
+ location, bus_drv_str, bus_pci_str);
+ }
+
printk(KERN_WARNING
- "EEH: location=%s driver=%s pci addr=%s\n",
+ "EEH: Device location=%s driver=%s pci addr=%s\n",
location, drv_str, pci_str);
/* Walk the various device drivers attached to this slot through
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index ef8c454..46f13a3 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -19,6 +19,7 @@
*/
#include <linux/kernel.h>
+#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/cpu.h>
#include <asm/system.h>
@@ -28,7 +29,7 @@
#include <asm/machdep.h>
#include <asm/vdso_datapage.h>
#include <asm/pSeries_reconfig.h>
-#include "xics.h"
+#include <asm/xics.h>
#include "plpar_wrappers.h"
#include "offline_states.h"
@@ -280,7 +281,7 @@
}
for_each_cpu(cpu, tmp) {
- BUG_ON(cpumask_test_cpu(cpu, cpu_present_mask));
+ BUG_ON(cpu_present(cpu));
set_cpu_present(cpu, true);
set_hard_smp_processor_id(cpu, *intserv++);
}
diff --git a/arch/powerpc/platforms/pseries/io_event_irq.c b/arch/powerpc/platforms/pseries/io_event_irq.c
new file mode 100644
index 0000000..c829e60
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/io_event_irq.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2010 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/irq.h>
+#include <asm/io_event_irq.h>
+
+#include "pseries.h"
+
+/*
+ * IO event interrupt is a mechanism provided by RTAS to return
+ * information about hardware error and non-error events. Device
+ * drivers can register their event handlers to receive events.
+ * Device drivers are expected to use atomic_notifier_chain_register()
+ * and atomic_notifier_chain_unregister() to register and unregister
+ * their event handlers. Since multiple IO event types and scopes
+ * share an IO event interrupt, the event handlers are called one
+ * by one until the IO event is claimed by one of the handlers.
+ * The event handlers are expected to return NOTIFY_OK if the
+ * event is handled by the event handler or NOTIFY_DONE if the
+ * event does not belong to the handler.
+ *
+ * Usage:
+ *
+ * Notifier function:
+ * #include <asm/io_event_irq.h>
+ * int event_handler(struct notifier_block *nb, unsigned long val, void *data) {
+ * p = (struct pseries_io_event_sect_data *) data;
+ * if (! is_my_event(p->scope, p->event_type)) return NOTIFY_DONE;
+ * :
+ * :
+ * return NOTIFY_OK;
+ * }
+ * struct notifier_block event_nb = {
+ * .notifier_call = event_handler,
+ * }
+ *
+ * Registration:
+ * atomic_notifier_chain_register(&pseries_ioei_notifier_list, &event_nb);
+ *
+ * Unregistration:
+ * atomic_notifier_chain_unregister(&pseries_ioei_notifier_list, &event_nb);
+ */
+
+ATOMIC_NOTIFIER_HEAD(pseries_ioei_notifier_list);
+EXPORT_SYMBOL_GPL(pseries_ioei_notifier_list);
+
+static int ioei_check_exception_token;
+
+/* pSeries event log format */
+
+/* Two bytes ASCII section IDs */
+#define PSERIES_ELOG_SECT_ID_PRIV_HDR (('P' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_USER_HDR (('U' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_PRIMARY_SRC (('P' << 8) | 'S')
+#define PSERIES_ELOG_SECT_ID_EXTENDED_UH (('E' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_FAILING_MTMS (('M' << 8) | 'T')
+#define PSERIES_ELOG_SECT_ID_SECONDARY_SRC (('S' << 8) | 'S')
+#define PSERIES_ELOG_SECT_ID_DUMP_LOCATOR (('D' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_FW_ERROR (('S' << 8) | 'W')
+#define PSERIES_ELOG_SECT_ID_IMPACT_PART_ID (('L' << 8) | 'P')
+#define PSERIES_ELOG_SECT_ID_LOGIC_RESOURCE_ID (('L' << 8) | 'R')
+#define PSERIES_ELOG_SECT_ID_HMC_ID (('H' << 8) | 'M')
+#define PSERIES_ELOG_SECT_ID_EPOW (('E' << 8) | 'P')
+#define PSERIES_ELOG_SECT_ID_IO_EVENT (('I' << 8) | 'E')
+#define PSERIES_ELOG_SECT_ID_MANUFACT_INFO (('M' << 8) | 'I')
+#define PSERIES_ELOG_SECT_ID_CALL_HOME (('C' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_USER_DEF (('U' << 8) | 'D')
+
+/* Vendor specific Platform Event Log Format, Version 6, section header */
+struct pseries_elog_section {
+ uint16_t id; /* 0x00 2-byte ASCII section ID */
+ uint16_t length; /* 0x02 Section length in bytes */
+ uint8_t version; /* 0x04 Section version */
+ uint8_t subtype; /* 0x05 Section subtype */
+ uint16_t creator_component; /* 0x06 Creator component ID */
+ uint8_t data[]; /* 0x08 Start of section data */
+};
+
+static char ioei_rtas_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
+
+/**
+ * Find data portion of a specific section in RTAS extended event log.
+ * @elog: RTAS error/event log.
+ * @sect_id: secsion ID.
+ *
+ * Return:
+ * pointer to the section data of the specified section
+ * NULL if not found
+ */
+static struct pseries_elog_section *find_xelog_section(struct rtas_error_log *elog,
+ uint16_t sect_id)
+{
+ struct rtas_ext_event_log_v6 *xelog =
+ (struct rtas_ext_event_log_v6 *) elog->buffer;
+ struct pseries_elog_section *sect;
+ unsigned char *p, *log_end;
+
+ /* Check that we understand the format */
+ if (elog->extended_log_length < sizeof(struct rtas_ext_event_log_v6) ||
+ xelog->log_format != RTAS_V6EXT_LOG_FORMAT_EVENT_LOG ||
+ xelog->company_id != RTAS_V6EXT_COMPANY_ID_IBM)
+ return NULL;
+
+ log_end = elog->buffer + elog->extended_log_length;
+ p = xelog->vendor_log;
+ while (p < log_end) {
+ sect = (struct pseries_elog_section *)p;
+ if (sect->id == sect_id)
+ return sect;
+ p += sect->length;
+ }
+ return NULL;
+}
+
+/**
+ * Find the data portion of an IO Event section from event log.
+ * @elog: RTAS error/event log.
+ *
+ * Return:
+ * pointer to a valid IO event section data. NULL if not found.
+ */
+static struct pseries_io_event * ioei_find_event(struct rtas_error_log *elog)
+{
+ struct pseries_elog_section *sect;
+
+ /* We should only ever get called for io-event interrupts, but if
+ * we do get called for another type then something went wrong so
+ * make some noise about it.
+ * RTAS_TYPE_IO only exists in extended event log version 6 or later.
+ * No need to check event log version.
+ */
+ if (unlikely(elog->type != RTAS_TYPE_IO)) {
+ printk_once(KERN_WARNING "io_event_irq: Unexpected event type %d",
+ elog->type);
+ return NULL;
+ }
+
+ sect = find_xelog_section(elog, PSERIES_ELOG_SECT_ID_IO_EVENT);
+ if (unlikely(!sect)) {
+ printk_once(KERN_WARNING "io_event_irq: RTAS extended event "
+ "log does not contain an IO Event section. "
+ "Could be a bug in system firmware!\n");
+ return NULL;
+ }
+ return (struct pseries_io_event *) §->data;
+}
+
+/*
+ * PAPR:
+ * - check-exception returns the first found error or event and clear that
+ * error or event so it is reported once.
+ * - Each interrupt returns one event. If a plateform chooses to report
+ * multiple events through a single interrupt, it must ensure that the
+ * interrupt remains asserted until check-exception has been used to
+ * process all out-standing events for that interrupt.
+ *
+ * Implementation notes:
+ * - Events must be processed in the order they are returned. Hence,
+ * sequential in nature.
+ * - The owner of an event is determined by combinations of scope,
+ * event type, and sub-type. There is no easy way to pre-sort clients
+ * by scope or event type alone. For example, Torrent ISR route change
+ * event is reported with scope 0x00 (Not Applicatable) rather than
+ * 0x3B (Torrent-hub). It is better to let the clients to identify
+ * who owns the the event.
+ */
+
+static irqreturn_t ioei_interrupt(int irq, void *dev_id)
+{
+ struct pseries_io_event *event;
+ int rtas_rc;
+
+ for (;;) {
+ rtas_rc = rtas_call(ioei_check_exception_token, 6, 1, NULL,
+ RTAS_VECTOR_EXTERNAL_INTERRUPT,
+ virq_to_hw(irq),
+ RTAS_IO_EVENTS, 1 /* Time Critical */,
+ __pa(ioei_rtas_buf),
+ RTAS_DATA_BUF_SIZE);
+ if (rtas_rc != 0)
+ break;
+
+ event = ioei_find_event((struct rtas_error_log *)ioei_rtas_buf);
+ if (!event)
+ continue;
+
+ atomic_notifier_call_chain(&pseries_ioei_notifier_list,
+ 0, event);
+ }
+ return IRQ_HANDLED;
+}
+
+static int __init ioei_init(void)
+{
+ struct device_node *np;
+
+ ioei_check_exception_token = rtas_token("check-exception");
+ if (ioei_check_exception_token == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("IO Event IRQ not supported on this system !\n");
+ return -ENODEV;
+ }
+ np = of_find_node_by_path("/event-sources/ibm,io-events");
+ if (np) {
+ request_event_sources_irqs(np, ioei_interrupt, "IO_EVENT");
+ of_node_put(np);
+ } else {
+ pr_err("io_event_irq: No ibm,io-events on system! "
+ "IO Event interrupt disabled.\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+machine_subsys_initcall(pseries, ioei_init);
+
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 6d5412a..01faab9 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -659,15 +659,18 @@
{
struct dynamic_dma_window_prop *dwp;
struct property *win64;
- const u32 *ddr_avail;
+ const u32 *ddw_avail;
u64 liobn;
int len, ret;
- ddr_avail = of_get_property(np, "ibm,ddw-applicable", &len);
+ ddw_avail = of_get_property(np, "ibm,ddw-applicable", &len);
win64 = of_find_property(np, DIRECT64_PROPNAME, NULL);
- if (!win64 || !ddr_avail || len < 3 * sizeof(u32))
+ if (!win64)
return;
+ if (!ddw_avail || len < 3 * sizeof(u32) || win64->length < sizeof(*dwp))
+ goto delprop;
+
dwp = win64->value;
liobn = (u64)be32_to_cpu(dwp->liobn);
@@ -681,28 +684,29 @@
pr_debug("%s successfully cleared tces in window.\n",
np->full_name);
- ret = rtas_call(ddr_avail[2], 1, 1, NULL, liobn);
+ ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
if (ret)
pr_warning("%s: failed to remove direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np->full_name, ret, ddr_avail[2], liobn);
+ np->full_name, ret, ddw_avail[2], liobn);
else
pr_debug("%s: successfully removed direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np->full_name, ret, ddr_avail[2], liobn);
+ np->full_name, ret, ddw_avail[2], liobn);
+
+delprop:
+ ret = prom_remove_property(np, win64);
+ if (ret)
+ pr_warning("%s: failed to remove direct window property: %d\n",
+ np->full_name, ret);
}
-
-static int dupe_ddw_if_already_created(struct pci_dev *dev, struct device_node *pdn)
+static u64 find_existing_ddw(struct device_node *pdn)
{
- struct device_node *dn;
- struct pci_dn *pcidn;
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
u64 dma_addr = 0;
- dn = pci_device_to_OF_node(dev);
- pcidn = PCI_DN(dn);
spin_lock(&direct_window_list_lock);
/* check if we already created a window and dupe that config if so */
list_for_each_entry(window, &direct_window_list, list) {
@@ -717,36 +721,40 @@
return dma_addr;
}
-static u64 dupe_ddw_if_kexec(struct pci_dev *dev, struct device_node *pdn)
+static int find_existing_ddw_windows(void)
{
- struct device_node *dn;
- struct pci_dn *pcidn;
int len;
+ struct device_node *pdn;
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
- u64 dma_addr = 0;
- dn = pci_device_to_OF_node(dev);
- pcidn = PCI_DN(dn);
- direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
- if (direct64) {
+ if (!firmware_has_feature(FW_FEATURE_LPAR))
+ return 0;
+
+ for_each_node_with_property(pdn, DIRECT64_PROPNAME) {
+ direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
+ if (!direct64)
+ continue;
+
window = kzalloc(sizeof(*window), GFP_KERNEL);
- if (!window) {
+ if (!window || len < sizeof(struct dynamic_dma_window_prop)) {
+ kfree(window);
remove_ddw(pdn);
- } else {
- window->device = pdn;
- window->prop = direct64;
- spin_lock(&direct_window_list_lock);
- list_add(&window->list, &direct_window_list);
- spin_unlock(&direct_window_list_lock);
- dma_addr = direct64->dma_base;
+ continue;
}
+
+ window->device = pdn;
+ window->prop = direct64;
+ spin_lock(&direct_window_list_lock);
+ list_add(&window->list, &direct_window_list);
+ spin_unlock(&direct_window_list_lock);
}
- return dma_addr;
+ return 0;
}
+machine_arch_initcall(pseries, find_existing_ddw_windows);
-static int query_ddw(struct pci_dev *dev, const u32 *ddr_avail,
+static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_query_response *query)
{
struct device_node *dn;
@@ -767,15 +775,15 @@
if (pcidn->eeh_pe_config_addr)
cfg_addr = pcidn->eeh_pe_config_addr;
buid = pcidn->phb->buid;
- ret = rtas_call(ddr_avail[0], 3, 5, (u32 *)query,
+ ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
cfg_addr, BUID_HI(buid), BUID_LO(buid));
dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
- " returned %d\n", ddr_avail[0], cfg_addr, BUID_HI(buid),
+ " returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid),
BUID_LO(buid), ret);
return ret;
}
-static int create_ddw(struct pci_dev *dev, const u32 *ddr_avail,
+static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_create_response *create, int page_shift,
int window_shift)
{
@@ -800,12 +808,12 @@
do {
/* extra outputs are LIOBN and dma-addr (hi, lo) */
- ret = rtas_call(ddr_avail[1], 5, 4, (u32 *)create, cfg_addr,
+ ret = rtas_call(ddw_avail[1], 5, 4, (u32 *)create, cfg_addr,
BUID_HI(buid), BUID_LO(buid), page_shift, window_shift);
} while (rtas_busy_delay(ret));
dev_info(&dev->dev,
"ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d "
- "(liobn = 0x%x starting addr = %x %x)\n", ddr_avail[1],
+ "(liobn = 0x%x starting addr = %x %x)\n", ddw_avail[1],
cfg_addr, BUID_HI(buid), BUID_LO(buid), page_shift,
window_shift, ret, create->liobn, create->addr_hi, create->addr_lo);
@@ -831,18 +839,14 @@
int page_shift;
u64 dma_addr, max_addr;
struct device_node *dn;
- const u32 *uninitialized_var(ddr_avail);
+ const u32 *uninitialized_var(ddw_avail);
struct direct_window *window;
- struct property *uninitialized_var(win64);
+ struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
mutex_lock(&direct_window_init_mutex);
- dma_addr = dupe_ddw_if_already_created(dev, pdn);
- if (dma_addr != 0)
- goto out_unlock;
-
- dma_addr = dupe_ddw_if_kexec(dev, pdn);
+ dma_addr = find_existing_ddw(pdn);
if (dma_addr != 0)
goto out_unlock;
@@ -854,8 +858,8 @@
* for the given node in that order.
* the property is actually in the parent, not the PE
*/
- ddr_avail = of_get_property(pdn, "ibm,ddw-applicable", &len);
- if (!ddr_avail || len < 3 * sizeof(u32))
+ ddw_avail = of_get_property(pdn, "ibm,ddw-applicable", &len);
+ if (!ddw_avail || len < 3 * sizeof(u32))
goto out_unlock;
/*
@@ -865,7 +869,7 @@
* of page sizes: supported and supported for migrate-dma.
*/
dn = pci_device_to_OF_node(dev);
- ret = query_ddw(dev, ddr_avail, &query);
+ ret = query_ddw(dev, ddw_avail, &query);
if (ret != 0)
goto out_unlock;
@@ -907,13 +911,14 @@
}
win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
+ win64->length = sizeof(*ddwprop);
if (!win64->name || !win64->value) {
dev_info(&dev->dev,
"couldn't allocate property name and value\n");
goto out_free_prop;
}
- ret = create_ddw(dev, ddr_avail, &create, page_shift, len);
+ ret = create_ddw(dev, ddw_avail, &create, page_shift, len);
if (ret != 0)
goto out_free_prop;
@@ -1021,13 +1026,16 @@
const void *dma_window = NULL;
u64 dma_offset;
- if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+ if (!dev->dma_mask)
return -EIO;
+ if (!dev_is_pci(dev))
+ goto check_mask;
+
+ pdev = to_pci_dev(dev);
+
/* only attempt to use a new window if 64-bit DMA is requested */
if (!disable_ddw && dma_mask == DMA_BIT_MASK(64)) {
- pdev = to_pci_dev(dev);
-
dn = pci_device_to_OF_node(pdev);
dev_dbg(dev, "node is %s\n", dn->full_name);
@@ -1054,12 +1062,17 @@
}
}
- /* fall-through to iommu ops */
- if (!ddw_enabled) {
- dev_info(dev, "Using 32-bit DMA via iommu\n");
+ /* fall back on iommu ops, restore table pointer with ops */
+ if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) {
+ dev_info(dev, "Restoring 32-bit DMA via iommu\n");
set_dma_ops(dev, &dma_iommu_ops);
+ pci_dma_dev_setup_pSeriesLP(pdev);
}
+check_mask:
+ if (!dma_supported(dev, dma_mask))
+ return -EIO;
+
*dev->dma_mask = dma_mask;
return 0;
}
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index 77d38a5..54cf3a4a 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -7,15 +7,18 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/firmware.h>
#include <asm/kexec.h>
#include <asm/mpic.h>
+#include <asm/xics.h>
#include <asm/smp.h>
#include "pseries.h"
-#include "xics.h"
#include "plpar_wrappers.h"
static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index ca5d589..39e6e0a 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -329,6 +329,8 @@
/* Make pHyp happy */
if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
hpte_r &= ~_PAGE_COHERENT;
+ if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
+ flags |= H_COALESCE_CAND;
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
@@ -573,7 +575,7 @@
unsigned long i, pix, rc;
unsigned long flags = 0;
struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
- int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+ int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
unsigned long param[9];
unsigned long va;
unsigned long hash, index, shift, hidx, slot;
@@ -771,3 +773,47 @@
local_irq_restore(flags);
}
#endif
+
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
+{
+ int rc;
+ unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+ rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+ mpp_data->entitled_mem = retbuf[0];
+ mpp_data->mapped_mem = retbuf[1];
+
+ mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+ mpp_data->pool_num = retbuf[2] & 0xffff;
+
+ mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+ mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+ mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+ mpp_data->pool_size = retbuf[4];
+ mpp_data->loan_request = retbuf[5];
+ mpp_data->backing_mem = retbuf[6];
+
+ return rc;
+}
+EXPORT_SYMBOL(h_get_mpp);
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data)
+{
+ int rc;
+ unsigned long retbuf[PLPAR_HCALL9_BUFSIZE] = { 0 };
+
+ rc = plpar_hcall9(H_GET_MPP_X, retbuf);
+
+ mpp_x_data->coalesced_bytes = retbuf[0];
+ mpp_x_data->pool_coalesced_bytes = retbuf[1];
+ mpp_x_data->pool_purr_cycles = retbuf[2];
+ mpp_x_data->pool_spurr_cycles = retbuf[3];
+
+ return rc;
+}
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d980111..4bf2120 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -270,31 +270,4 @@
lbuf[1]);
}
-static inline long plpar_eoi(unsigned long xirr)
-{
- return plpar_hcall_norets(H_EOI, xirr);
-}
-
-static inline long plpar_cppr(unsigned long cppr)
-{
- return plpar_hcall_norets(H_CPPR, cppr);
-}
-
-static inline long plpar_ipi(unsigned long servernum, unsigned long mfrr)
-{
- return plpar_hcall_norets(H_IPI, servernum, mfrr);
-}
-
-static inline long plpar_xirr(unsigned long *xirr_ret, unsigned char cppr)
-{
- long rc;
- unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
-
- rc = plpar_hcall(H_XIRR, retbuf, cppr);
-
- *xirr_ret = retbuf[0];
-
- return rc;
-}
-
#endif /* _PSERIES_PLPAR_WRAPPERS_H */
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index c55d7ad..086d2ae 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -122,7 +122,7 @@
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
RTAS_VECTOR_EXTERNAL_INTERRUPT,
- irq_map[irq].hwirq,
+ virq_to_hw(irq),
RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
critical, __pa(&ras_log_buf),
rtas_get_error_log_max());
@@ -157,7 +157,7 @@
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
RTAS_VECTOR_EXTERNAL_INTERRUPT,
- irq_map[irq].hwirq,
+ virq_to_hw(irq),
RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
__pa(&ras_log_buf),
rtas_get_error_log_max());
@@ -227,7 +227,7 @@
struct rtas_error_log *h, *errhdr = NULL;
if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
- printk(KERN_ERR "FWNMI: corrupt r3\n");
+ printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
return NULL;
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 6c42cfd..593acce 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -53,9 +53,9 @@
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/nvram.h>
-#include "xics.h"
#include <asm/pmc.h>
#include <asm/mpic.h>
+#include <asm/xics.h>
#include <asm/ppc-pci.h>
#include <asm/i8259.h>
#include <asm/udbg.h>
@@ -205,6 +205,9 @@
mpic_assign_isu(mpic, n, isuaddr);
}
+ /* Setup top-level get_irq */
+ ppc_md.get_irq = mpic_get_irq;
+
/* All ISUs are setup, complete initialization */
mpic_init(mpic);
@@ -214,7 +217,7 @@
static void __init pseries_xics_init_IRQ(void)
{
- xics_init_IRQ();
+ xics_init();
pseries_setup_i8259_cascade();
}
@@ -238,7 +241,6 @@
if (strstr(typep, "open-pic")) {
pSeries_mpic_node = of_node_get(np);
ppc_md.init_IRQ = pseries_mpic_init_IRQ;
- ppc_md.get_irq = mpic_get_irq;
setup_kexec_cpu_down_mpic();
smp_init_pseries_mpic();
return;
@@ -276,6 +278,8 @@
.notifier_call = pci_dn_reconfig_notifier,
};
+struct kmem_cache *dtl_cache;
+
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
/*
* Allocate space for the dispatch trace log for all possible cpus
@@ -287,18 +291,12 @@
int cpu, ret;
struct paca_struct *pp;
struct dtl_entry *dtl;
- struct kmem_cache *dtl_cache;
if (!firmware_has_feature(FW_FEATURE_SPLPAR))
return 0;
- dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
- DISPATCH_LOG_BYTES, 0, NULL);
- if (!dtl_cache) {
- pr_warn("Failed to create dispatch trace log buffer cache\n");
- pr_warn("Stolen time statistics will be unreliable\n");
+ if (!dtl_cache)
return 0;
- }
for_each_possible_cpu(cpu) {
pp = &paca[cpu];
@@ -332,10 +330,27 @@
return 0;
}
-
-early_initcall(alloc_dispatch_logs);
+#else /* !CONFIG_VIRT_CPU_ACCOUNTING */
+static inline int alloc_dispatch_logs(void)
+{
+ return 0;
+}
#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+static int alloc_dispatch_log_kmem_cache(void)
+{
+ dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
+ DISPATCH_LOG_BYTES, 0, NULL);
+ if (!dtl_cache) {
+ pr_warn("Failed to create dispatch trace log buffer cache\n");
+ pr_warn("Stolen time statistics will be unreliable\n");
+ return 0;
+ }
+
+ return alloc_dispatch_logs();
+}
+early_initcall(alloc_dispatch_log_kmem_cache);
+
static void __init pSeries_setup_arch(void)
{
/* Discover PIC type and setup ppc_md accordingly */
@@ -403,6 +418,16 @@
#define CMO_CHARACTERISTICS_TOKEN 44
#define CMO_MAXLENGTH 1026
+void pSeries_coalesce_init(void)
+{
+ struct hvcall_mpp_x_data mpp_x_data;
+
+ if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
+ powerpc_firmware_features |= FW_FEATURE_XCMO;
+ else
+ powerpc_firmware_features &= ~FW_FEATURE_XCMO;
+}
+
/**
* fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
* handle that here. (Stolen from parse_system_parameter_string)
@@ -472,6 +497,7 @@
pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
CMO_SecPSP);
powerpc_firmware_features |= FW_FEATURE_CMO;
+ pSeries_coalesce_init();
} else
pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
CMO_SecPSP);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index a509c52..fbffd7e 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -44,10 +44,11 @@
#include <asm/mpic.h>
#include <asm/vdso_datapage.h>
#include <asm/cputhreads.h>
+#include <asm/mpic.h>
+#include <asm/xics.h>
#include "plpar_wrappers.h"
#include "pseries.h"
-#include "xics.h"
#include "offline_states.h"
@@ -136,7 +137,6 @@
return 1;
}
-#ifdef CONFIG_XICS
static void __devinit smp_xics_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
@@ -151,14 +151,13 @@
set_default_offline_state(cpu);
#endif
}
-#endif /* CONFIG_XICS */
-static void __devinit smp_pSeries_kick_cpu(int nr)
+static int __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
if (!smp_startup_cpu(nr))
- return;
+ return -ENOENT;
/*
* The processor is currently spinning, waiting for the
@@ -180,6 +179,8 @@
"Ret= %ld\n", nr, rc);
}
#endif
+
+ return 0;
}
static int smp_pSeries_cpu_bootable(unsigned int nr)
@@ -197,23 +198,22 @@
return 1;
}
-#ifdef CONFIG_MPIC
+
static struct smp_ops_t pSeries_mpic_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_mpic_setup_cpu,
};
-#endif
-#ifdef CONFIG_XICS
+
static struct smp_ops_t pSeries_xics_smp_ops = {
- .message_pass = smp_xics_message_pass,
- .probe = smp_xics_probe,
+ .message_pass = smp_muxed_ipi_message_pass,
+ .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */
+ .probe = xics_smp_probe,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_xics_setup_cpu,
.cpu_bootable = smp_pSeries_cpu_bootable,
};
-#endif
/* This is called very early */
static void __init smp_init_pseries(void)
@@ -245,14 +245,12 @@
pr_debug(" <- smp_init_pSeries()\n");
}
-#ifdef CONFIG_MPIC
void __init smp_init_pseries_mpic(void)
{
smp_ops = &pSeries_mpic_smp_ops;
smp_init_pseries();
}
-#endif
void __init smp_init_pseries_xics(void)
{
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
deleted file mode 100644
index d690133..0000000
--- a/arch/powerpc/platforms/pseries/xics.c
+++ /dev/null
@@ -1,949 +0,0 @@
-/*
- * arch/powerpc/platforms/pseries/xics.c
- *
- * Copyright 2000 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/radix-tree.h>
-#include <linux/cpu.h>
-#include <linux/msi.h>
-#include <linux/of.h>
-#include <linux/percpu.h>
-
-#include <asm/firmware.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/smp.h>
-#include <asm/rtas.h>
-#include <asm/hvcall.h>
-#include <asm/machdep.h>
-
-#include "xics.h"
-#include "plpar_wrappers.h"
-
-static struct irq_host *xics_host;
-
-#define XICS_IPI 2
-#define XICS_IRQ_SPURIOUS 0
-
-/* Want a priority other than 0. Various HW issues require this. */
-#define DEFAULT_PRIORITY 5
-
-/*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
- */
-#define IPI_PRIORITY 4
-
-/* The least favored priority */
-#define LOWEST_PRIORITY 0xFF
-
-/* The number of priorities defined above */
-#define MAX_NUM_PRIORITIES 3
-
-static unsigned int default_server = 0xFF;
-static unsigned int default_distrib_server = 0;
-static unsigned int interrupt_server_size = 8;
-
-/* RTAS service tokens */
-static int ibm_get_xive;
-static int ibm_set_xive;
-static int ibm_int_on;
-static int ibm_int_off;
-
-struct xics_cppr {
- unsigned char stack[MAX_NUM_PRIORITIES];
- int index;
-};
-
-static DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
-
-/* Direct hardware low level accessors */
-
-/* The part of the interrupt presentation layer that we care about */
-struct xics_ipl {
- union {
- u32 word;
- u8 bytes[4];
- } xirr_poll;
- union {
- u32 word;
- u8 bytes[4];
- } xirr;
- u32 dummy;
- union {
- u32 word;
- u8 bytes[4];
- } qirr;
-};
-
-static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
-
-static inline unsigned int direct_xirr_info_get(void)
-{
- int cpu = smp_processor_id();
-
- return in_be32(&xics_per_cpu[cpu]->xirr.word);
-}
-
-static inline void direct_xirr_info_set(unsigned int value)
-{
- int cpu = smp_processor_id();
-
- out_be32(&xics_per_cpu[cpu]->xirr.word, value);
-}
-
-static inline void direct_cppr_info(u8 value)
-{
- int cpu = smp_processor_id();
-
- out_8(&xics_per_cpu[cpu]->xirr.bytes[0], value);
-}
-
-static inline void direct_qirr_info(int n_cpu, u8 value)
-{
- out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value);
-}
-
-
-/* LPAR low level accessors */
-
-static inline unsigned int lpar_xirr_info_get(unsigned char cppr)
-{
- unsigned long lpar_rc;
- unsigned long return_value;
-
- lpar_rc = plpar_xirr(&return_value, cppr);
- if (lpar_rc != H_SUCCESS)
- panic(" bad return code xirr - rc = %lx\n", lpar_rc);
- return (unsigned int)return_value;
-}
-
-static inline void lpar_xirr_info_set(unsigned int value)
-{
- unsigned long lpar_rc;
-
- lpar_rc = plpar_eoi(value);
- if (lpar_rc != H_SUCCESS)
- panic("bad return code EOI - rc = %ld, value=%x\n", lpar_rc,
- value);
-}
-
-static inline void lpar_cppr_info(u8 value)
-{
- unsigned long lpar_rc;
-
- lpar_rc = plpar_cppr(value);
- if (lpar_rc != H_SUCCESS)
- panic("bad return code cppr - rc = %lx\n", lpar_rc);
-}
-
-static inline void lpar_qirr_info(int n_cpu , u8 value)
-{
- unsigned long lpar_rc;
-
- lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
- if (lpar_rc != H_SUCCESS)
- panic("bad return code qirr - rc = %lx\n", lpar_rc);
-}
-
-
-/* Interface to generic irq subsystem */
-
-#ifdef CONFIG_SMP
-/*
- * For the moment we only implement delivery to all cpus or one cpu.
- *
- * If the requested affinity is cpu_all_mask, we set global affinity.
- * If not we set it to the first cpu in the mask, even if multiple cpus
- * are set. This is so things like irqbalance (which set core and package
- * wide affinities) do the right thing.
- */
-static int get_irq_server(unsigned int virq, const struct cpumask *cpumask,
- unsigned int strict_check)
-{
-
- if (!distribute_irqs)
- return default_server;
-
- if (!cpumask_subset(cpu_possible_mask, cpumask)) {
- int server = cpumask_first_and(cpu_online_mask, cpumask);
-
- if (server < nr_cpu_ids)
- return get_hard_smp_processor_id(server);
-
- if (strict_check)
- return -1;
- }
-
- /*
- * Workaround issue with some versions of JS20 firmware that
- * deliver interrupts to cpus which haven't been started. This
- * happens when using the maxcpus= boot option.
- */
- if (cpumask_equal(cpu_online_mask, cpu_present_mask))
- return default_distrib_server;
-
- return default_server;
-}
-#else
-#define get_irq_server(virq, cpumask, strict_check) (default_server)
-#endif
-
-static void xics_unmask_irq(struct irq_data *d)
-{
- unsigned int hwirq;
- int call_status;
- int server;
-
- pr_devel("xics: unmask virq %d\n", d->irq);
-
- hwirq = (unsigned int)irq_map[d->irq].hwirq;
- pr_devel(" -> map to hwirq 0x%x\n", hwirq);
- if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
- return;
-
- server = get_irq_server(d->irq, d->affinity, 0);
-
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hwirq, server,
- DEFAULT_PRIORITY);
- if (call_status != 0) {
- printk(KERN_ERR
- "%s: ibm_set_xive irq %u server %x returned %d\n",
- __func__, hwirq, server, call_status);
- return;
- }
-
- /* Now unmask the interrupt (often a no-op) */
- call_status = rtas_call(ibm_int_on, 1, 1, NULL, hwirq);
- if (call_status != 0) {
- printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
- __func__, hwirq, call_status);
- return;
- }
-}
-
-static unsigned int xics_startup(struct irq_data *d)
-{
- /*
- * The generic MSI code returns with the interrupt disabled on the
- * card, using the MSI mask bits. Firmware doesn't appear to unmask
- * at that level, so we do it here by hand.
- */
- if (d->msi_desc)
- unmask_msi_irq(d);
-
- /* unmask it */
- xics_unmask_irq(d);
- return 0;
-}
-
-static void xics_mask_real_irq(unsigned int hwirq)
-{
- int call_status;
-
- if (hwirq == XICS_IPI)
- return;
-
- call_status = rtas_call(ibm_int_off, 1, 1, NULL, hwirq);
- if (call_status != 0) {
- printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
- __func__, hwirq, call_status);
- return;
- }
-
- /* Have to set XIVE to 0xff to be able to remove a slot */
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hwirq,
- default_server, 0xff);
- if (call_status != 0) {
- printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
- __func__, hwirq, call_status);
- return;
- }
-}
-
-static void xics_mask_irq(struct irq_data *d)
-{
- unsigned int hwirq;
-
- pr_devel("xics: mask virq %d\n", d->irq);
-
- hwirq = (unsigned int)irq_map[d->irq].hwirq;
- if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
- return;
- xics_mask_real_irq(hwirq);
-}
-
-static void xics_mask_unknown_vec(unsigned int vec)
-{
- printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
- xics_mask_real_irq(vec);
-}
-
-static inline unsigned int xics_xirr_vector(unsigned int xirr)
-{
- /*
- * The top byte is the old cppr, to be restored on EOI.
- * The remaining 24 bits are the vector.
- */
- return xirr & 0x00ffffff;
-}
-
-static void push_cppr(unsigned int vec)
-{
- struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-
- if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
- return;
-
- if (vec == XICS_IPI)
- os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
- else
- os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
-}
-
-static unsigned int xics_get_irq_direct(void)
-{
- unsigned int xirr = direct_xirr_info_get();
- unsigned int vec = xics_xirr_vector(xirr);
- unsigned int irq;
-
- if (vec == XICS_IRQ_SPURIOUS)
- return NO_IRQ;
-
- irq = irq_radix_revmap_lookup(xics_host, vec);
- if (likely(irq != NO_IRQ)) {
- push_cppr(vec);
- return irq;
- }
-
- /* We don't have a linux mapping, so have rtas mask it. */
- xics_mask_unknown_vec(vec);
-
- /* We might learn about it later, so EOI it */
- direct_xirr_info_set(xirr);
- return NO_IRQ;
-}
-
-static unsigned int xics_get_irq_lpar(void)
-{
- struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
- unsigned int xirr = lpar_xirr_info_get(os_cppr->stack[os_cppr->index]);
- unsigned int vec = xics_xirr_vector(xirr);
- unsigned int irq;
-
- if (vec == XICS_IRQ_SPURIOUS)
- return NO_IRQ;
-
- irq = irq_radix_revmap_lookup(xics_host, vec);
- if (likely(irq != NO_IRQ)) {
- push_cppr(vec);
- return irq;
- }
-
- /* We don't have a linux mapping, so have RTAS mask it. */
- xics_mask_unknown_vec(vec);
-
- /* We might learn about it later, so EOI it */
- lpar_xirr_info_set(xirr);
- return NO_IRQ;
-}
-
-static unsigned char pop_cppr(void)
-{
- struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-
- if (WARN_ON(os_cppr->index < 1))
- return LOWEST_PRIORITY;
-
- return os_cppr->stack[--os_cppr->index];
-}
-
-static void xics_eoi_direct(struct irq_data *d)
-{
- unsigned int hwirq = (unsigned int)irq_map[d->irq].hwirq;
-
- iosync();
- direct_xirr_info_set((pop_cppr() << 24) | hwirq);
-}
-
-static void xics_eoi_lpar(struct irq_data *d)
-{
- unsigned int hwirq = (unsigned int)irq_map[d->irq].hwirq;
-
- iosync();
- lpar_xirr_info_set((pop_cppr() << 24) | hwirq);
-}
-
-static int
-xics_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool force)
-{
- unsigned int hwirq;
- int status;
- int xics_status[2];
- int irq_server;
-
- hwirq = (unsigned int)irq_map[d->irq].hwirq;
- if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
- return -1;
-
- status = rtas_call(ibm_get_xive, 1, 3, xics_status, hwirq);
-
- if (status) {
- printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
- __func__, hwirq, status);
- return -1;
- }
-
- irq_server = get_irq_server(d->irq, cpumask, 1);
- if (irq_server == -1) {
- char cpulist[128];
- cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
- printk(KERN_WARNING
- "%s: No online cpus in the mask %s for irq %d\n",
- __func__, cpulist, d->irq);
- return -1;
- }
-
- status = rtas_call(ibm_set_xive, 3, 1, NULL,
- hwirq, irq_server, xics_status[1]);
-
- if (status) {
- printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
- __func__, hwirq, status);
- return -1;
- }
-
- return 0;
-}
-
-static struct irq_chip xics_pic_direct = {
- .name = "XICS",
- .irq_startup = xics_startup,
- .irq_mask = xics_mask_irq,
- .irq_unmask = xics_unmask_irq,
- .irq_eoi = xics_eoi_direct,
- .irq_set_affinity = xics_set_affinity
-};
-
-static struct irq_chip xics_pic_lpar = {
- .name = "XICS",
- .irq_startup = xics_startup,
- .irq_mask = xics_mask_irq,
- .irq_unmask = xics_unmask_irq,
- .irq_eoi = xics_eoi_lpar,
- .irq_set_affinity = xics_set_affinity
-};
-
-
-/* Interface to arch irq controller subsystem layer */
-
-/* Points to the irq_chip we're actually using */
-static struct irq_chip *xics_irq_chip;
-
-static int xics_host_match(struct irq_host *h, struct device_node *node)
-{
- /* IBM machines have interrupt parents of various funky types for things
- * like vdevices, events, etc... The trick we use here is to match
- * everything here except the legacy 8259 which is compatible "chrp,iic"
- */
- return !of_device_is_compatible(node, "chrp,iic");
-}
-
-static int xics_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
-
- /* Insert the interrupt mapping into the radix tree for fast lookup */
- irq_radix_revmap_insert(xics_host, virq, hw);
-
- irq_set_status_flags(virq, IRQ_LEVEL);
- irq_set_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
- return 0;
-}
-
-static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_flags)
-
-{
- /* Current xics implementation translates everything
- * to level. It is not technically right for MSIs but this
- * is irrelevant at this point. We might get smarter in the future
- */
- *out_hwirq = intspec[0];
- *out_flags = IRQ_TYPE_LEVEL_LOW;
-
- return 0;
-}
-
-static struct irq_host_ops xics_host_ops = {
- .match = xics_host_match,
- .map = xics_host_map,
- .xlate = xics_host_xlate,
-};
-
-static void __init xics_init_host(void)
-{
- if (firmware_has_feature(FW_FEATURE_LPAR))
- xics_irq_chip = &xics_pic_lpar;
- else
- xics_irq_chip = &xics_pic_direct;
-
- xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
- XICS_IRQ_SPURIOUS);
- BUG_ON(xics_host == NULL);
- irq_set_default_host(xics_host);
-}
-
-
-/* Inter-processor interrupt support */
-
-#ifdef CONFIG_SMP
-/*
- * XICS only has a single IPI, so encode the messages per CPU
- */
-static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
-
-static inline void smp_xics_do_message(int cpu, int msg)
-{
- unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
-
- set_bit(msg, tgt);
- mb();
- if (firmware_has_feature(FW_FEATURE_LPAR))
- lpar_qirr_info(cpu, IPI_PRIORITY);
- else
- direct_qirr_info(cpu, IPI_PRIORITY);
-}
-
-void smp_xics_message_pass(int target, int msg)
-{
- unsigned int i;
-
- if (target < NR_CPUS) {
- smp_xics_do_message(target, msg);
- } else {
- for_each_online_cpu(i) {
- if (target == MSG_ALL_BUT_SELF
- && i == smp_processor_id())
- continue;
- smp_xics_do_message(i, msg);
- }
- }
-}
-
-static irqreturn_t xics_ipi_dispatch(int cpu)
-{
- unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
-
- mb(); /* order mmio clearing qirr */
- while (*tgt) {
- if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) {
- smp_message_recv(PPC_MSG_CALL_FUNCTION);
- }
- if (test_and_clear_bit(PPC_MSG_RESCHEDULE, tgt)) {
- smp_message_recv(PPC_MSG_RESCHEDULE);
- }
- if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE, tgt)) {
- smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
- }
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
- if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, tgt)) {
- smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
- }
-#endif
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
-{
- int cpu = smp_processor_id();
-
- direct_qirr_info(cpu, 0xff);
-
- return xics_ipi_dispatch(cpu);
-}
-
-static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
-{
- int cpu = smp_processor_id();
-
- lpar_qirr_info(cpu, 0xff);
-
- return xics_ipi_dispatch(cpu);
-}
-
-static void xics_request_ipi(void)
-{
- unsigned int ipi;
- int rc;
-
- ipi = irq_create_mapping(xics_host, XICS_IPI);
- BUG_ON(ipi == NO_IRQ);
-
- /*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled
- */
- irq_set_handler(ipi, handle_percpu_irq);
- if (firmware_has_feature(FW_FEATURE_LPAR))
- rc = request_irq(ipi, xics_ipi_action_lpar,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
- else
- rc = request_irq(ipi, xics_ipi_action_direct,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
- BUG_ON(rc);
-}
-
-int __init smp_xics_probe(void)
-{
- xics_request_ipi();
-
- return cpumask_weight(cpu_possible_mask);
-}
-
-#endif /* CONFIG_SMP */
-
-
-/* Initialization */
-
-static void xics_update_irq_servers(void)
-{
- int i, j;
- struct device_node *np;
- u32 ilen;
- const u32 *ireg;
- u32 hcpuid;
-
- /* Find the server numbers for the boot cpu. */
- np = of_get_cpu_node(boot_cpuid, NULL);
- BUG_ON(!np);
-
- ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
- if (!ireg) {
- of_node_put(np);
- return;
- }
-
- i = ilen / sizeof(int);
- hcpuid = get_hard_smp_processor_id(boot_cpuid);
-
- /* Global interrupt distribution server is specified in the last
- * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
- * entry fom this property for current boot cpu id and use it as
- * default distribution server
- */
- for (j = 0; j < i; j += 2) {
- if (ireg[j] == hcpuid) {
- default_server = hcpuid;
- default_distrib_server = ireg[j+1];
- }
- }
-
- of_node_put(np);
-}
-
-static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
- unsigned long size)
-{
- int i;
-
- /* This may look gross but it's good enough for now, we don't quite
- * have a hard -> linux processor id matching.
- */
- for_each_possible_cpu(i) {
- if (!cpu_present(i))
- continue;
- if (hw_id == get_hard_smp_processor_id(i)) {
- xics_per_cpu[i] = ioremap(addr, size);
- return;
- }
- }
-}
-
-static void __init xics_init_one_node(struct device_node *np,
- unsigned int *indx)
-{
- unsigned int ilen;
- const u32 *ireg;
-
- /* This code does the theorically broken assumption that the interrupt
- * server numbers are the same as the hard CPU numbers.
- * This happens to be the case so far but we are playing with fire...
- * should be fixed one of these days. -BenH.
- */
- ireg = of_get_property(np, "ibm,interrupt-server-ranges", NULL);
-
- /* Do that ever happen ? we'll know soon enough... but even good'old
- * f80 does have that property ..
- */
- WARN_ON(ireg == NULL);
- if (ireg) {
- /*
- * set node starting index for this node
- */
- *indx = *ireg;
- }
- ireg = of_get_property(np, "reg", &ilen);
- if (!ireg)
- panic("xics_init_IRQ: can't find interrupt reg property");
-
- while (ilen >= (4 * sizeof(u32))) {
- unsigned long addr, size;
-
- /* XXX Use proper OF parsing code here !!! */
- addr = (unsigned long)*ireg++ << 32;
- ilen -= sizeof(u32);
- addr |= *ireg++;
- ilen -= sizeof(u32);
- size = (unsigned long)*ireg++ << 32;
- ilen -= sizeof(u32);
- size |= *ireg++;
- ilen -= sizeof(u32);
- xics_map_one_cpu(*indx, addr, size);
- (*indx)++;
- }
-}
-
-void __init xics_init_IRQ(void)
-{
- struct device_node *np;
- u32 indx = 0;
- int found = 0;
- const u32 *isize;
-
- ppc64_boot_msg(0x20, "XICS Init");
-
- ibm_get_xive = rtas_token("ibm,get-xive");
- ibm_set_xive = rtas_token("ibm,set-xive");
- ibm_int_on = rtas_token("ibm,int-on");
- ibm_int_off = rtas_token("ibm,int-off");
-
- for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
- found = 1;
- if (firmware_has_feature(FW_FEATURE_LPAR)) {
- of_node_put(np);
- break;
- }
- xics_init_one_node(np, &indx);
- }
- if (found == 0)
- return;
-
- /* get the bit size of server numbers */
- found = 0;
-
- for_each_compatible_node(np, NULL, "ibm,ppc-xics") {
- isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
-
- if (!isize)
- continue;
-
- if (!found) {
- interrupt_server_size = *isize;
- found = 1;
- } else if (*isize != interrupt_server_size) {
- printk(KERN_WARNING "XICS: "
- "mismatched ibm,interrupt-server#-size\n");
- interrupt_server_size = max(*isize,
- interrupt_server_size);
- }
- }
-
- xics_update_irq_servers();
- xics_init_host();
-
- if (firmware_has_feature(FW_FEATURE_LPAR))
- ppc_md.get_irq = xics_get_irq_lpar;
- else
- ppc_md.get_irq = xics_get_irq_direct;
-
- xics_setup_cpu();
-
- ppc64_boot_msg(0x21, "XICS Done");
-}
-
-/* Cpu startup, shutdown, and hotplug */
-
-static void xics_set_cpu_priority(unsigned char cppr)
-{
- struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-
- /*
- * we only really want to set the priority when there's
- * just one cppr value on the stack
- */
- WARN_ON(os_cppr->index != 0);
-
- os_cppr->stack[0] = cppr;
-
- if (firmware_has_feature(FW_FEATURE_LPAR))
- lpar_cppr_info(cppr);
- else
- direct_cppr_info(cppr);
- iosync();
-}
-
-/* Have the calling processor join or leave the specified global queue */
-static void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
-{
- int index;
- int status;
-
- if (!rtas_indicator_present(GLOBAL_INTERRUPT_QUEUE, NULL))
- return;
-
- index = (1UL << interrupt_server_size) - 1 - gserver;
-
- status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, index, join);
-
- WARN(status < 0, "set-indicator(%d, %d, %u) returned %d\n",
- GLOBAL_INTERRUPT_QUEUE, index, join, status);
-}
-
-void xics_setup_cpu(void)
-{
- xics_set_cpu_priority(LOWEST_PRIORITY);
-
- xics_set_cpu_giq(default_distrib_server, 1);
-}
-
-void xics_teardown_cpu(void)
-{
- struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
- int cpu = smp_processor_id();
-
- /*
- * we have to reset the cppr index to 0 because we're
- * not going to return from the IPI
- */
- os_cppr->index = 0;
- xics_set_cpu_priority(0);
-
- /* Clear any pending IPI request */
- if (firmware_has_feature(FW_FEATURE_LPAR))
- lpar_qirr_info(cpu, 0xff);
- else
- direct_qirr_info(cpu, 0xff);
-}
-
-void xics_kexec_teardown_cpu(int secondary)
-{
- xics_teardown_cpu();
-
- /*
- * we take the ipi irq but and never return so we
- * need to EOI the IPI, but want to leave our priority 0
- *
- * should we check all the other interrupts too?
- * should we be flagging idle loop instead?
- * or creating some task to be scheduled?
- */
-
- if (firmware_has_feature(FW_FEATURE_LPAR))
- lpar_xirr_info_set((0x00 << 24) | XICS_IPI);
- else
- direct_xirr_info_set((0x00 << 24) | XICS_IPI);
-
- /*
- * Some machines need to have at least one cpu in the GIQ,
- * so leave the master cpu in the group.
- */
- if (secondary)
- xics_set_cpu_giq(default_distrib_server, 0);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Interrupts are disabled. */
-void xics_migrate_irqs_away(void)
-{
- int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
- int virq;
-
- /* If we used to be the default server, move to the new "boot_cpuid" */
- if (hw_cpu == default_server)
- xics_update_irq_servers();
-
- /* Reject any interrupt that was queued to us... */
- xics_set_cpu_priority(0);
-
- /* Remove ourselves from the global interrupt queue */
- xics_set_cpu_giq(default_distrib_server, 0);
-
- /* Allow IPIs again... */
- xics_set_cpu_priority(DEFAULT_PRIORITY);
-
- for_each_irq(virq) {
- struct irq_desc *desc;
- struct irq_chip *chip;
- unsigned int hwirq;
- int xics_status[2];
- int status;
- unsigned long flags;
-
- /* We can't set affinity on ISA interrupts */
- if (virq < NUM_ISA_INTERRUPTS)
- continue;
- if (irq_map[virq].host != xics_host)
- continue;
- hwirq = (unsigned int)irq_map[virq].hwirq;
- /* We need to get IPIs still. */
- if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
- continue;
-
- desc = irq_to_desc(virq);
-
- /* We only need to migrate enabled IRQS */
- if (desc == NULL || desc->action == NULL)
- continue;
-
- chip = irq_desc_get_chip(desc);
- if (chip == NULL || chip->irq_set_affinity == NULL)
- continue;
-
- raw_spin_lock_irqsave(&desc->lock, flags);
-
- status = rtas_call(ibm_get_xive, 1, 3, xics_status, hwirq);
- if (status) {
- printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
- __func__, hwirq, status);
- goto unlock;
- }
-
- /*
- * We only support delivery to all cpus or to one cpu.
- * The irq has to be migrated only in the single cpu
- * case.
- */
- if (xics_status[0] != hw_cpu)
- goto unlock;
-
- /* This is expected during cpu offline. */
- if (cpu_online(cpu))
- printk(KERN_WARNING "IRQ %u affinity broken off cpu %u\n",
- virq, cpu);
-
- /* Reset affinity to all cpus */
- cpumask_setall(desc->irq_data.affinity);
- chip->irq_set_affinity(&desc->irq_data, cpu_all_mask, true);
-unlock:
- raw_spin_unlock_irqrestore(&desc->lock, flags);
- }
-}
-#endif
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
deleted file mode 100644
index d1d5a83..0000000
--- a/arch/powerpc/platforms/pseries/xics.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/powerpc/platforms/pseries/xics.h
- *
- * Copyright 2000 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _POWERPC_KERNEL_XICS_H
-#define _POWERPC_KERNEL_XICS_H
-
-extern void xics_init_IRQ(void);
-extern void xics_setup_cpu(void);
-extern void xics_teardown_cpu(void);
-extern void xics_kexec_teardown_cpu(int secondary);
-extern void xics_migrate_irqs_away(void);
-extern int smp_xics_probe(void);
-extern void smp_xics_message_pass(int target, int msg);
-
-#endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
new file mode 100644
index 0000000..c3c48eb
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -0,0 +1,28 @@
+config PPC_WSP
+ bool
+ default n
+
+menu "WSP platform selection"
+ depends on PPC_BOOK3E_64
+
+config PPC_PSR2
+ bool "PSR-2 platform"
+ select PPC_A2
+ select GENERIC_TBSYNC
+ select PPC_SCOM
+ select EPAPR_BOOT
+ select PPC_WSP
+ select PPC_XICS
+ select PPC_ICP_NATIVE
+ default y
+
+endmenu
+
+config PPC_A2_DD2
+ bool "Support for DD2 based A2/WSP systems"
+ depends on PPC_A2
+
+config WORKAROUND_ERRATUM_463
+ depends on PPC_A2_DD2
+ bool "Workaround erratum 463"
+ default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
new file mode 100644
index 0000000..095be73
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -0,0 +1,6 @@
+ccflags-y += -mno-minimal-toc
+
+obj-y += setup.o ics.o
+obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
+obj-$(CONFIG_PPC_WSP) += scom_wsp.o
+obj-$(CONFIG_SMP) += smp.o scom_smp.o
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
new file mode 100644
index 0000000..e53bd9e
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/ics.c
@@ -0,0 +1,712 @@
+/*
+ * Copyright 2008-2011 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/xics.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+
+/* WSP ICS */
+
+struct wsp_ics {
+ struct ics ics;
+ struct device_node *dn;
+ void __iomem *regs;
+ spinlock_t lock;
+ unsigned long *bitmap;
+ u32 chip_id;
+ u32 lsi_base;
+ u32 lsi_count;
+ u64 hwirq_start;
+ u64 count;
+#ifdef CONFIG_SMP
+ int *hwirq_cpu_map;
+#endif
+};
+
+#define to_wsp_ics(ics) container_of(ics, struct wsp_ics, ics)
+
+#define INT_SRC_LAYER_BUID_REG(base) ((base) + 0x00)
+#define IODA_TBL_ADDR_REG(base) ((base) + 0x18)
+#define IODA_TBL_DATA_REG(base) ((base) + 0x20)
+#define XIVE_UPDATE_REG(base) ((base) + 0x28)
+#define ICS_INT_CAPS_REG(base) ((base) + 0x30)
+
+#define TBL_AUTO_INCREMENT ((1UL << 63) | (1UL << 15))
+#define TBL_SELECT_XIST (1UL << 48)
+#define TBL_SELECT_XIVT (1UL << 49)
+
+#define IODA_IRQ(irq) ((irq) & (0x7FFULL)) /* HRM 5.1.3.4 */
+
+#define XIST_REQUIRED 0x8
+#define XIST_REJECTED 0x4
+#define XIST_PRESENTED 0x2
+#define XIST_PENDING 0x1
+
+#define XIVE_SERVER_SHIFT 42
+#define XIVE_SERVER_MASK 0xFFFFULL
+#define XIVE_PRIORITY_MASK 0xFFULL
+#define XIVE_PRIORITY_SHIFT 32
+#define XIVE_WRITE_ENABLE (1ULL << 63)
+
+/*
+ * The docs refer to a 6 bit field called ChipID, which consists of a
+ * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
+ * so we ignore it, and every where we use "chip id" in this code we
+ * mean the NodeID.
+ */
+#define WSP_ICS_CHIP_SHIFT 17
+
+
+static struct wsp_ics *ics_list;
+static int num_ics;
+
+/* ICS Source controller accessors */
+
+static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
+{
+ unsigned long flags;
+ u64 xive;
+
+ spin_lock_irqsave(&ics->lock, flags);
+ out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
+ xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
+ spin_unlock_irqrestore(&ics->lock, flags);
+
+ return xive;
+}
+
+static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
+{
+ xive &= ~XIVE_ADDR_MASK;
+ xive |= (irq & XIVE_ADDR_MASK);
+ xive |= XIVE_WRITE_ENABLE;
+
+ out_be64(XIVE_UPDATE_REG(ics->regs), xive);
+}
+
+static u64 xive_set_server(u64 xive, unsigned int server)
+{
+ u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
+
+ xive &= mask;
+ xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
+
+ return xive;
+}
+
+static u64 xive_set_priority(u64 xive, unsigned int priority)
+{
+ u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
+
+ xive &= mask;
+ xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
+
+ return xive;
+}
+
+
+#ifdef CONFIG_SMP
+/* Find logical CPUs within mask on a given chip and store result in ret */
+void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
+{
+ int cpu, chip;
+ struct device_node *cpu_dn, *dn;
+ const u32 *prop;
+
+ cpumask_clear(ret);
+ for_each_cpu(cpu, mask) {
+ cpu_dn = of_get_cpu_node(cpu, NULL);
+ if (!cpu_dn)
+ continue;
+
+ prop = of_get_property(cpu_dn, "at-node", NULL);
+ if (!prop) {
+ of_node_put(cpu_dn);
+ continue;
+ }
+
+ dn = of_find_node_by_phandle(*prop);
+ of_node_put(cpu_dn);
+
+ chip = wsp_get_chip_id(dn);
+ if (chip == chip_id)
+ cpumask_set_cpu(cpu, ret);
+
+ of_node_put(dn);
+ }
+}
+
+/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
+static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
+ const cpumask_t *affinity)
+{
+ cpumask_var_t avail, newmask;
+ int ret = -ENOMEM, cpu, cpu_rover = 0, target;
+ int index = hwirq - ics->hwirq_start;
+ unsigned int nodeid;
+
+ BUG_ON(index < 0 || index >= ics->count);
+
+ if (!ics->hwirq_cpu_map)
+ return -ENOMEM;
+
+ if (!distribute_irqs) {
+ ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
+ return 0;
+ }
+
+ /* Allocate needed CPU masks */
+ if (!alloc_cpumask_var(&avail, GFP_KERNEL))
+ goto ret;
+ if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
+ goto freeavail;
+
+ /* Find PBus attached to the source of this IRQ */
+ nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
+
+ /* Find CPUs that could handle this IRQ */
+ if (affinity)
+ cpumask_and(avail, cpu_online_mask, affinity);
+ else
+ cpumask_copy(avail, cpu_online_mask);
+
+ /* Narrow selection down to logical CPUs on the same chip */
+ cpus_on_chip(nodeid, avail, newmask);
+
+ /* Ensure we haven't narrowed it down to 0 */
+ if (unlikely(cpumask_empty(newmask))) {
+ if (unlikely(cpumask_empty(avail))) {
+ ret = -1;
+ goto out;
+ }
+ cpumask_copy(newmask, avail);
+ }
+
+ /* Choose a CPU out of those we narrowed it down to in round robin */
+ target = hwirq % cpumask_weight(newmask);
+ for_each_cpu(cpu, newmask) {
+ if (cpu_rover++ >= target) {
+ ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
+ ret = 0;
+ goto out;
+ }
+ }
+
+ /* Shouldn't happen */
+ WARN_ON(1);
+
+out:
+ free_cpumask_var(newmask);
+freeavail:
+ free_cpumask_var(avail);
+ret:
+ if (ret < 0) {
+ ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
+ pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
+ hwirq, ics->hwirq_cpu_map[index]);
+ }
+ return ret;
+}
+
+static void alloc_irq_map(struct wsp_ics *ics)
+{
+ int i;
+
+ ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
+ if (!ics->hwirq_cpu_map) {
+ pr_warning("Allocate hwirq_cpu_map failed, "
+ "IRQ balancing disabled\n");
+ return;
+ }
+
+ for (i=0; i < ics->count; i++)
+ ics->hwirq_cpu_map[i] = xics_default_server;
+}
+
+static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
+{
+ int index = hwirq - ics->hwirq_start;
+
+ BUG_ON(index < 0 || index >= ics->count);
+
+ if (!ics->hwirq_cpu_map)
+ return xics_default_server;
+
+ return ics->hwirq_cpu_map[index];
+}
+#else /* !CONFIG_SMP */
+static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
+ const cpumask_t *affinity)
+{
+ return 0;
+}
+
+static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
+{
+ return xics_default_server;
+}
+
+static void alloc_irq_map(struct wsp_ics *ics) { }
+#endif
+
+static void wsp_chip_unmask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct wsp_ics *ics;
+ int server;
+ u64 xive;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ ics = d->chip_data;
+ if (WARN_ON(!ics))
+ return;
+
+ server = get_irq_server(ics, hw_irq);
+
+ xive = wsp_ics_get_xive(ics, hw_irq);
+ xive = xive_set_server(xive, server);
+ xive = xive_set_priority(xive, DEFAULT_PRIORITY);
+ wsp_ics_set_xive(ics, hw_irq, xive);
+}
+
+static unsigned int wsp_chip_startup(struct irq_data *d)
+{
+ /* unmask it */
+ wsp_chip_unmask_irq(d);
+ return 0;
+}
+
+static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
+{
+ u64 xive;
+
+ if (hw_irq == XICS_IPI)
+ return;
+
+ if (WARN_ON(!ics))
+ return;
+ xive = wsp_ics_get_xive(ics, hw_irq);
+ xive = xive_set_server(xive, xics_default_server);
+ xive = xive_set_priority(xive, LOWEST_PRIORITY);
+ wsp_ics_set_xive(ics, hw_irq, xive);
+}
+
+static void wsp_chip_mask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct wsp_ics *ics = d->chip_data;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ wsp_mask_real_irq(hw_irq, ics);
+}
+
+static int wsp_chip_set_affinity(struct irq_data *d,
+ const struct cpumask *cpumask, bool force)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct wsp_ics *ics;
+ int ret;
+ u64 xive;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return -1;
+
+ ics = d->chip_data;
+ if (WARN_ON(!ics))
+ return -1;
+ xive = wsp_ics_get_xive(ics, hw_irq);
+
+ /*
+ * For the moment only implement delivery to all cpus or one cpu.
+ * Get current irq_server for the given irq
+ */
+ ret = cache_hwirq_map(ics, d->irq, cpumask);
+ if (ret == -1) {
+ char cpulist[128];
+ cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+ pr_warning("%s: No online cpus in the mask %s for irq %d\n",
+ __func__, cpulist, d->irq);
+ return -1;
+ } else if (ret == -ENOMEM) {
+ pr_warning("%s: Out of memory\n", __func__);
+ return -1;
+ }
+
+ xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
+ wsp_ics_set_xive(ics, hw_irq, xive);
+
+ return 0;
+}
+
+static struct irq_chip wsp_irq_chip = {
+ .name = "WSP ICS",
+ .irq_startup = wsp_chip_startup,
+ .irq_mask = wsp_chip_mask_irq,
+ .irq_unmask = wsp_chip_unmask_irq,
+ .irq_set_affinity = wsp_chip_set_affinity
+};
+
+static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
+{
+ /* All ICSs in the system implement a global irq number space,
+ * so match against them all. */
+ return of_device_is_compatible(dn, "ibm,ppc-xics");
+}
+
+static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
+{
+ if (hwirq >= wsp_ics->hwirq_start &&
+ hwirq < wsp_ics->hwirq_start + wsp_ics->count)
+ return 1;
+
+ return 0;
+}
+
+static int wsp_ics_map(struct ics *ics, unsigned int virq)
+{
+ struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+ unsigned int hw_irq = virq_to_hw(virq);
+ unsigned long flags;
+
+ if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+ return -ENOENT;
+
+ irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
+
+ irq_set_chip_data(virq, wsp_ics);
+
+ spin_lock_irqsave(&wsp_ics->lock, flags);
+ bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
+ spin_unlock_irqrestore(&wsp_ics->lock, flags);
+
+ return 0;
+}
+
+static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
+{
+ struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+
+ if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+ return;
+
+ pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
+ wsp_mask_real_irq(hw_irq, wsp_ics);
+}
+
+static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
+{
+ struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+
+ if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+ return -ENOENT;
+
+ return get_irq_server(wsp_ics, hw_irq);
+}
+
+/* HW Number allocation API */
+
+static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
+{
+ struct device_node *iparent;
+ int i;
+
+ iparent = of_irq_find_parent(dn);
+ if (!iparent) {
+ pr_err("wsp_ics: Failed to find interrupt parent!\n");
+ return NULL;
+ }
+
+ for(i = 0; i < num_ics; i++) {
+ if(ics_list[i].dn == iparent)
+ break;
+ }
+
+ if (i >= num_ics) {
+ pr_err("wsp_ics: Unable to find parent bitmap!\n");
+ return NULL;
+ }
+
+ return &ics_list[i];
+}
+
+int wsp_ics_alloc_irq(struct device_node *dn, int num)
+{
+ struct wsp_ics *ics;
+ int order, offset;
+
+ ics = wsp_ics_find_dn_ics(dn);
+ if (!ics)
+ return -ENODEV;
+
+ /* Fast, but overly strict if num isn't a power of two */
+ order = get_count_order(num);
+
+ spin_lock_irq(&ics->lock);
+ offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
+ spin_unlock_irq(&ics->lock);
+
+ if (offset < 0)
+ return offset;
+
+ return offset + ics->hwirq_start;
+}
+
+void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
+{
+ struct wsp_ics *ics;
+
+ ics = wsp_ics_find_dn_ics(dn);
+ if (WARN_ON(!ics))
+ return;
+
+ spin_lock_irq(&ics->lock);
+ bitmap_release_region(ics->bitmap, irq, 0);
+ spin_unlock_irq(&ics->lock);
+}
+
+/* Initialisation */
+
+static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
+ struct device_node *dn)
+{
+ int len, i, j, size;
+ u32 start, count;
+ const u32 *p;
+
+ size = BITS_TO_LONGS(ics->count) * sizeof(long);
+ ics->bitmap = kzalloc(size, GFP_KERNEL);
+ if (!ics->bitmap) {
+ pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&ics->lock);
+
+ p = of_get_property(dn, "available-ranges", &len);
+ if (!p || !len) {
+ /* FIXME this should be a WARN() once mambo is updated */
+ pr_err("wsp_ics: No available-ranges defined for %s\n",
+ dn->full_name);
+ return 0;
+ }
+
+ if (len % (2 * sizeof(u32)) != 0) {
+ /* FIXME this should be a WARN() once mambo is updated */
+ pr_err("wsp_ics: Invalid available-ranges for %s\n",
+ dn->full_name);
+ return 0;
+ }
+
+ bitmap_fill(ics->bitmap, ics->count);
+
+ for (i = 0; i < len / sizeof(u32); i += 2) {
+ start = of_read_number(p + i, 1);
+ count = of_read_number(p + i + 1, 1);
+
+ pr_devel("%s: start: %d count: %d\n", __func__, start, count);
+
+ if ((start + count) > (ics->hwirq_start + ics->count) ||
+ start < ics->hwirq_start) {
+ pr_err("wsp_ics: Invalid range! -> %d to %d\n",
+ start, start + count);
+ break;
+ }
+
+ for (j = 0; j < count; j++)
+ bitmap_release_region(ics->bitmap,
+ (start + j) - ics->hwirq_start, 0);
+ }
+
+ /* Ensure LSIs are not available for allocation */
+ bitmap_allocate_region(ics->bitmap, ics->lsi_base,
+ get_count_order(ics->lsi_count));
+
+ return 0;
+}
+
+static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
+{
+ u32 lsi_buid, msi_buid, msi_base, msi_count;
+ void __iomem *regs;
+ const u32 *p;
+ int rc, len, i;
+ u64 caps, buid;
+
+ p = of_get_property(dn, "interrupt-ranges", &len);
+ if (!p || len < (2 * sizeof(u32))) {
+ pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
+ dn->full_name);
+ return -ENOENT;
+ }
+
+ if (len > (2 * sizeof(u32))) {
+ pr_err("wsp_ics: Multiple ics ranges not supported.\n");
+ return -EINVAL;
+ }
+
+ regs = of_iomap(dn, 0);
+ if (!regs) {
+ pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
+ return -ENXIO;
+ }
+
+ ics->hwirq_start = of_read_number(p, 1);
+ ics->count = of_read_number(p + 1, 1);
+ ics->regs = regs;
+
+ ics->chip_id = wsp_get_chip_id(dn);
+ if (WARN_ON(ics->chip_id < 0))
+ ics->chip_id = 0;
+
+ /* Get some informations about the critter */
+ caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
+ buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
+ ics->lsi_count = caps >> 56;
+ msi_count = (caps >> 44) & 0x7ff;
+
+ /* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
+ * rest is mixed in the interrupt number. We store the whole
+ * thing though
+ */
+ lsi_buid = (buid >> 48) & 0x1ff;
+ ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
+ msi_buid = (buid >> 37) & 0x7;
+ msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
+
+ pr_info("wsp_ics: Found %s\n", dn->full_name);
+ pr_info("wsp_ics: irq range : 0x%06llx..0x%06llx\n",
+ ics->hwirq_start, ics->hwirq_start + ics->count - 1);
+ pr_info("wsp_ics: %4d LSIs : 0x%06x..0x%06x\n",
+ ics->lsi_count, ics->lsi_base,
+ ics->lsi_base + ics->lsi_count - 1);
+ pr_info("wsp_ics: %4d MSIs : 0x%06x..0x%06x\n",
+ msi_count, msi_base,
+ msi_base + msi_count - 1);
+
+ /* Let's check the HW config is sane */
+ if (ics->lsi_base < ics->hwirq_start ||
+ (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
+ pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
+ if (msi_base < ics->hwirq_start ||
+ (msi_base + msi_count) > (ics->hwirq_start + ics->count))
+ pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
+
+ /* We don't check for overlap between LSI and MSI, which will happen
+ * if we use the same BUID, I'm not sure yet how legit that is.
+ */
+
+ rc = wsp_ics_bitmap_setup(ics, dn);
+ if (rc) {
+ iounmap(regs);
+ return rc;
+ }
+
+ ics->dn = of_node_get(dn);
+ alloc_irq_map(ics);
+
+ for(i = 0; i < ics->count; i++)
+ wsp_mask_real_irq(ics->hwirq_start + i, ics);
+
+ ics->ics.map = wsp_ics_map;
+ ics->ics.mask_unknown = wsp_ics_mask_unknown;
+ ics->ics.get_server = wsp_ics_get_server;
+ ics->ics.host_match = wsp_ics_host_match;
+
+ xics_register_ics(&ics->ics);
+
+ return 0;
+}
+
+static void __init wsp_ics_set_default_server(void)
+{
+ struct device_node *np;
+ u32 hwid;
+
+ /* Find the server number for the boot cpu. */
+ np = of_get_cpu_node(boot_cpuid, NULL);
+ BUG_ON(!np);
+
+ hwid = get_hard_smp_processor_id(boot_cpuid);
+
+ pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
+ xics_default_server = hwid;
+
+ of_node_put(np);
+}
+
+static int __init wsp_ics_init(void)
+{
+ struct device_node *dn;
+ struct wsp_ics *ics;
+ int rc, found;
+
+ wsp_ics_set_default_server();
+
+ found = 0;
+ for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
+ found++;
+
+ if (found == 0) {
+ pr_err("wsp_ics: No ICS's found!\n");
+ return -ENODEV;
+ }
+
+ ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
+ if (!ics_list) {
+ pr_err("wsp_ics: No memory for structs.\n");
+ return -ENOMEM;
+ }
+
+ num_ics = 0;
+ ics = ics_list;
+ for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
+ rc = wsp_ics_setup(ics, dn);
+ if (rc == 0) {
+ ics++;
+ num_ics++;
+ }
+ }
+
+ if (found != num_ics) {
+ pr_err("wsp_ics: Failed setting up %d ICS's\n",
+ found - num_ics);
+ return -1;
+ }
+
+ return 0;
+}
+
+void __init wsp_init_irq(void)
+{
+ wsp_ics_init();
+ xics_init();
+
+ /* We need to patch our irq chip's EOI to point to the right ICP */
+ wsp_irq_chip.irq_eoi = icp_ops->eoi;
+}
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
new file mode 100644
index 0000000..e34d531
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/ics.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2009 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ICS_H
+#define __ICS_H
+
+#define XIVE_ADDR_MASK 0x7FFULL
+
+extern void wsp_init_irq(void);
+
+extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
+extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
+
+#endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
new file mode 100644
index 0000000..be05631
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -0,0 +1,332 @@
+/*
+ * IBM Onboard Peripheral Bus Interrupt Controller
+ *
+ * Copyright 2010 Jack Miller, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#include <asm/reg_a2.h>
+#include <asm/irq.h>
+
+#define OPB_NR_IRQS 32
+
+#define OPB_MLSASIER 0x04 /* MLS Accumulated Status IER */
+#define OPB_MLSIR 0x50 /* MLS Interrupt Register */
+#define OPB_MLSIER 0x54 /* MLS Interrupt Enable Register */
+#define OPB_MLSIPR 0x58 /* MLS Interrupt Polarity Register */
+#define OPB_MLSIIR 0x5c /* MLS Interrupt Inputs Register */
+
+static int opb_index = 0;
+
+struct opb_pic {
+ struct irq_host *host;
+ void *regs;
+ int index;
+ spinlock_t lock;
+};
+
+static u32 opb_in(struct opb_pic *opb, int offset)
+{
+ return in_be32(opb->regs + offset);
+}
+
+static void opb_out(struct opb_pic *opb, int offset, u32 val)
+{
+ out_be32(opb->regs + offset, val);
+}
+
+static void opb_unmask_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 ier, bitset;
+
+ opb = d->chip_data;
+ bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ier = opb_in(opb, OPB_MLSIER);
+ opb_out(opb, OPB_MLSIER, ier | bitset);
+ ier = opb_in(opb, OPB_MLSIER);
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 ier, mask;
+
+ opb = d->chip_data;
+ mask = ~(1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ier = opb_in(opb, OPB_MLSIER);
+ opb_out(opb, OPB_MLSIER, ier & mask);
+ ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_ack_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 bitset;
+
+ opb = d->chip_data;
+ bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ opb_out(opb, OPB_MLSIR, bitset);
+ opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_ack_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 bitset;
+ u32 ier, ir;
+
+ opb = d->chip_data;
+ bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ier = opb_in(opb, OPB_MLSIER);
+ opb_out(opb, OPB_MLSIER, ier & ~bitset);
+ ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+ opb_out(opb, OPB_MLSIR, bitset);
+ ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ int invert, ipr, mask, bit;
+
+ opb = d->chip_data;
+
+ /* The only information we're interested in in the type is whether it's
+ * a high or low trigger. For high triggered interrupts, the polarity
+ * set for it in the MLS Interrupt Polarity Register is 0, for low
+ * interrupts it's 1 so that the proper input in the MLS Interrupt Input
+ * Register is interrupted as asserting the interrupt. */
+
+ switch (flow) {
+ case IRQ_TYPE_NONE:
+ opb_mask_irq(d);
+ return 0;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ invert = 0;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ invert = 1;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ bit = (1 << (31 - irqd_to_hwirq(d)));
+ mask = ~bit;
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ipr = opb_in(opb, OPB_MLSIPR);
+ ipr = (ipr & mask) | (invert ? bit : 0);
+ opb_out(opb, OPB_MLSIPR, ipr);
+ ipr = opb_in(opb, OPB_MLSIPR); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+
+ /* Record the type in the interrupt descriptor */
+ irqd_set_trigger_type(d, flow);
+
+ return 0;
+}
+
+static struct irq_chip opb_irq_chip = {
+ .name = "OPB",
+ .irq_mask = opb_mask_irq,
+ .irq_unmask = opb_unmask_irq,
+ .irq_mask_ack = opb_mask_ack_irq,
+ .irq_ack = opb_ack_irq,
+ .irq_set_type = opb_set_irq_type
+};
+
+static int opb_host_map(struct irq_host *host, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct opb_pic *opb;
+
+ opb = host->host_data;
+
+ /* Most of the important stuff is handled by the generic host code, like
+ * the lookup, so just attach some info to the virtual irq */
+
+ irq_set_chip_data(virq, opb);
+ irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ /* Interrupt size must == 2 */
+ BUG_ON(intsize != 2);
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1];
+ return 0;
+}
+
+static struct irq_host_ops opb_host_ops = {
+ .map = opb_host_map,
+ .xlate = opb_host_xlate,
+};
+
+irqreturn_t opb_irq_handler(int irq, void *private)
+{
+ struct opb_pic *opb;
+ u32 ir, src, subvirq;
+
+ opb = (struct opb_pic *) private;
+
+ /* Read the OPB MLS Interrupt Register for
+ * asserted interrupts */
+ ir = opb_in(opb, OPB_MLSIR);
+ if (!ir)
+ return IRQ_NONE;
+
+ do {
+ /* Get 1 - 32 source, *NOT* bit */
+ src = 32 - ffs(ir);
+
+ /* Translate from the OPB's conception of interrupt number to
+ * Linux's virtual IRQ */
+
+ subvirq = irq_linear_revmap(opb->host, src);
+
+ generic_handle_irq(subvirq);
+ } while ((ir = opb_in(opb, OPB_MLSIR)));
+
+ return IRQ_HANDLED;
+}
+
+struct opb_pic *opb_pic_init_one(struct device_node *dn)
+{
+ struct opb_pic *opb;
+ struct resource res;
+
+ if (of_address_to_resource(dn, 0, &res)) {
+ printk(KERN_ERR "opb: Couldn't translate resource\n");
+ return NULL;
+ }
+
+ opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
+ if (!opb) {
+ printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
+ return NULL;
+ }
+
+ /* Get access to the OPB MMIO registers */
+ opb->regs = ioremap(res.start + 0x10000, 0x1000);
+ if (!opb->regs) {
+ printk(KERN_ERR "opb: Failed to allocate register space!\n");
+ goto free_opb;
+ }
+
+ /* Allocate an irq host so that Linux knows that despite only
+ * having one interrupt to issue, we're the controller for multiple
+ * hardware IRQs, so later we can lookup their virtual IRQs. */
+
+ opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
+ OPB_NR_IRQS, &opb_host_ops, -1);
+
+ if (!opb->host) {
+ printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
+ goto free_regs;
+ }
+
+ opb->index = opb_index++;
+ spin_lock_init(&opb->lock);
+ opb->host->host_data = opb;
+
+ /* Disable all interrupts by default */
+ opb_out(opb, OPB_MLSASIER, 0);
+ opb_out(opb, OPB_MLSIER, 0);
+
+ /* ACK any interrupts left by FW */
+ opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
+
+ return opb;
+
+free_regs:
+ iounmap(opb->regs);
+free_opb:
+ kfree(opb);
+ return NULL;
+}
+
+void __init opb_pic_init(void)
+{
+ struct device_node *dn;
+ struct opb_pic *opb;
+ int virq;
+ int rc;
+
+ /* Call init_one for each OPB device */
+ for_each_compatible_node(dn, NULL, "ibm,opb") {
+
+ /* Fill in an OPB struct */
+ opb = opb_pic_init_one(dn);
+ if (!opb) {
+ printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
+ continue;
+ }
+
+ /* Map / get opb's hardware virtual irq */
+ virq = irq_of_parse_and_map(dn, 0);
+ if (virq <= 0) {
+ printk("opb: irq_op_parse_and_map failed!\n");
+ continue;
+ }
+
+ /* Attach opb interrupt handler to new virtual IRQ */
+ rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+ if (rc) {
+ printk("opb: request_irq failed: %d\n", rc);
+ continue;
+ }
+
+ printk("OPB%d init with %d IRQs at %p\n", opb->index,
+ OPB_NR_IRQS, opb->regs);
+ }
+}
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
new file mode 100644
index 0000000..40f2891
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+
+static void psr2_spin(void)
+{
+ hard_irq_disable();
+ for (;;) ;
+}
+
+static void psr2_restart(char *cmd)
+{
+ psr2_spin();
+}
+
+static int psr2_probe_devices(void)
+{
+ struct device_node *np;
+
+ /* Our RTC is a ds1500. It seems to be programatically compatible
+ * with the ds1511 for which we have a driver so let's use that
+ */
+ np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+ if (np != NULL) {
+ struct resource res;
+ if (of_address_to_resource(np, 0, &res) == 0)
+ platform_device_register_simple("ds1511", 0, &res, 1);
+ }
+ return 0;
+}
+machine_arch_initcall(psr2_md, psr2_probe_devices);
+
+static void __init psr2_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ scom_init_wsp();
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ a2_setup_smp();
+#endif
+}
+
+static int __init psr2_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
+ return 0;
+
+ return 1;
+}
+
+static void __init psr2_init_irq(void)
+{
+ wsp_init_irq();
+ opb_pic_init();
+}
+
+define_machine(psr2_md) {
+ .name = "PSR2 A2",
+ .probe = psr2_probe,
+ .setup_arch = psr2_setup_arch,
+ .restart = psr2_restart,
+ .power_off = psr2_spin,
+ .halt = psr2_spin,
+ .calibrate_decr = generic_calibrate_decr,
+ .init_IRQ = psr2_init_irq,
+ .progress = udbg_progress,
+ .power_save = book3e_idle,
+};
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
new file mode 100644
index 0000000..141e780
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -0,0 +1,427 @@
+/*
+ * SCOM support for A2 platforms
+ *
+ * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
+ * Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+#define SCOM_RAMC 0x2a /* Ram Command */
+#define SCOM_RAMC_TGT1_EXT 0x80000000
+#define SCOM_RAMC_SRC1_EXT 0x40000000
+#define SCOM_RAMC_SRC2_EXT 0x20000000
+#define SCOM_RAMC_SRC3_EXT 0x10000000
+#define SCOM_RAMC_ENABLE 0x00080000
+#define SCOM_RAMC_THREADSEL 0x00060000
+#define SCOM_RAMC_EXECUTE 0x00010000
+#define SCOM_RAMC_MSR_OVERRIDE 0x00008000
+#define SCOM_RAMC_MSR_PR 0x00004000
+#define SCOM_RAMC_MSR_GS 0x00002000
+#define SCOM_RAMC_FORCE 0x00001000
+#define SCOM_RAMC_FLUSH 0x00000800
+#define SCOM_RAMC_INTERRUPT 0x00000004
+#define SCOM_RAMC_ERROR 0x00000002
+#define SCOM_RAMC_DONE 0x00000001
+#define SCOM_RAMI 0x29 /* Ram Instruction */
+#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */
+#define SCOM_RAMIC_INSN 0xffffffff00000000
+#define SCOM_RAMD 0x2d /* Ram Data */
+#define SCOM_RAMDH 0x2e /* Ram Data High */
+#define SCOM_RAMDL 0x2f /* Ram Data Low */
+#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */
+#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000
+#define SCOM_PCCR0_ENABLE_RAM 0x40000000
+#define SCOM_THRCTL 0x30 /* Thread Control and Status */
+#define SCOM_THRCTL_T0_STOP 0x80000000
+#define SCOM_THRCTL_T1_STOP 0x40000000
+#define SCOM_THRCTL_T2_STOP 0x20000000
+#define SCOM_THRCTL_T3_STOP 0x10000000
+#define SCOM_THRCTL_T0_STEP 0x08000000
+#define SCOM_THRCTL_T1_STEP 0x04000000
+#define SCOM_THRCTL_T2_STEP 0x02000000
+#define SCOM_THRCTL_T3_STEP 0x01000000
+#define SCOM_THRCTL_T0_RUN 0x00800000
+#define SCOM_THRCTL_T1_RUN 0x00400000
+#define SCOM_THRCTL_T2_RUN 0x00200000
+#define SCOM_THRCTL_T3_RUN 0x00100000
+#define SCOM_THRCTL_T0_PM 0x00080000
+#define SCOM_THRCTL_T1_PM 0x00040000
+#define SCOM_THRCTL_T2_PM 0x00020000
+#define SCOM_THRCTL_T3_PM 0x00010000
+#define SCOM_THRCTL_T0_UDE 0x00008000
+#define SCOM_THRCTL_T1_UDE 0x00004000
+#define SCOM_THRCTL_T2_UDE 0x00002000
+#define SCOM_THRCTL_T3_UDE 0x00001000
+#define SCOM_THRCTL_ASYNC_DIS 0x00000800
+#define SCOM_THRCTL_TB_DIS 0x00000400
+#define SCOM_THRCTL_DEC_DIS 0x00000200
+#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */
+#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */
+
+
+static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
+
+static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
+{
+ scom_map_t scom = per_cpu(scom_ptrs, cpu);
+ int tcpu;
+
+ if (scom_map_ok(scom)) {
+ *first_thread = 0;
+ return scom;
+ }
+
+ *first_thread = 1;
+
+ scom = scom_map_device(np, 0);
+
+ for (tcpu = cpu_first_thread_sibling(cpu);
+ tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
+ per_cpu(scom_ptrs, tcpu) = scom;
+
+ /* Hack: for the boot core, this will actually get called on
+ * the second thread up, not the first so our test above will
+ * set first_thread incorrectly. */
+ if (cpu_first_thread_sibling(cpu) == 0)
+ *first_thread = 0;
+
+ return scom;
+}
+
+static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
+{
+ u64 cmd, mask, val;
+ int n = 0;
+
+ cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
+ | ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
+ mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
+
+ scom_write(scom, SCOM_RAMIC, cmd);
+
+ while (!((val = scom_read(scom, SCOM_RAMC)) & mask)) {
+ pr_devel("Waiting on RAMC = 0x%llx\n", val);
+ if (++n == 3) {
+ pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
+ insn, thread);
+ return -1;
+ }
+ }
+
+ if (val & SCOM_RAMC_INTERRUPT) {
+ pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
+ insn, thread);
+ return -SCOM_RAMC_INTERRUPT;
+ }
+
+ if (val & SCOM_RAMC_ERROR) {
+ pr_err("RAMC error on instruction 0x%08x, thread %d\n",
+ insn, thread);
+ return -SCOM_RAMC_ERROR;
+ }
+
+ return 0;
+}
+
+static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
+ u64 *out_gpr)
+{
+ int rc;
+
+ /* or rN, rN, rN */
+ u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
+ rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
+ if (rc)
+ return rc;
+
+ *out_gpr = scom_read(scom, SCOM_RAMD);
+
+ return 0;
+}
+
+static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
+{
+ int rc, sprhi, sprlo;
+ u32 insn;
+
+ sprhi = spr >> 5;
+ sprlo = spr & 0x1f;
+ insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
+
+ if (spr == 0x0ff0)
+ insn = 0x7c2000a6; /* mfmsr r1 */
+
+ rc = a2_scom_ram(scom, thread, insn, 0xf);
+ if (rc)
+ return rc;
+ return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
+}
+
+static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
+ int alt, u64 val)
+{
+ u32 lis = 0x3c000000 | (gpr << 21);
+ u32 li = 0x38000000 | (gpr << 21);
+ u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
+ u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
+ u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
+ u32 highest = val >> 48;
+ u32 higher = (val >> 32) & 0xffff;
+ u32 high = (val >> 16) & 0xffff;
+ u32 low = val & 0xffff;
+ int lext = alt ? 0x8 : 0x0;
+ int oext = alt ? 0xf : 0x0;
+ int rc = 0;
+
+ if (highest)
+ rc |= a2_scom_ram(scom, thread, lis | highest, lext);
+
+ if (higher) {
+ if (highest)
+ rc |= a2_scom_ram(scom, thread, oris | higher, oext);
+ else
+ rc |= a2_scom_ram(scom, thread, li | higher, lext);
+ }
+
+ if (highest || higher)
+ rc |= a2_scom_ram(scom, thread, rldicr32, oext);
+
+ if (high) {
+ if (highest || higher)
+ rc |= a2_scom_ram(scom, thread, oris | high, oext);
+ else
+ rc |= a2_scom_ram(scom, thread, lis | high, lext);
+ }
+
+ if (highest || higher || high)
+ rc |= a2_scom_ram(scom, thread, ori | low, oext);
+ else
+ rc |= a2_scom_ram(scom, thread, li | low, lext);
+
+ return rc;
+}
+
+static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
+{
+ int sprhi = spr >> 5;
+ int sprlo = spr & 0x1f;
+ /* mtspr spr, r1 */
+ u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
+
+ if (spr == 0x0ff0)
+ insn = 0x7c200124; /* mtmsr r1 */
+
+ if (a2_scom_setgpr(scom, thread, 1, 1, val))
+ return -1;
+
+ return a2_scom_ram(scom, thread, insn, 0xf);
+}
+
+static int a2_scom_initial_tlb(scom_map_t scom, int thread)
+{
+ extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
+ extern u32 a2_tlbinit_after_iprot_flush[];
+ extern u32 a2_tlbinit_after_linear_map[];
+ u32 assoc, entries, i;
+ u64 epn, tlbcfg;
+ u32 *p;
+ int rc;
+
+ /* Invalidate all entries (including iprot) */
+
+ rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
+ if (rc)
+ goto scom_fail;
+ entries = tlbcfg & TLBnCFG_N_ENTRY;
+ assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
+ epn = 0;
+
+ /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
+ a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
+ /* Set MMUCR3 to write all thids bit to the TLB */
+ a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
+
+ /* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
+ a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
+ a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
+ for (i = 0; i < entries; i++) {
+
+ a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
+
+ /* tlbwe */
+ rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
+ if (rc)
+ goto scom_fail;
+
+ /* Next entry is new address? */
+ if((i + 1) % assoc == 0) {
+ epn += (1 << 30);
+ a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
+ }
+ }
+
+ /* Setup args for linear mapping */
+ rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
+ if (rc)
+ goto scom_fail;
+
+ /* Linear mapping */
+ for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
+ rc = a2_scom_ram(scom, thread, *p, 0);
+ if (rc)
+ goto scom_fail;
+ }
+
+ /*
+ * For the boot thread, between the linear mapping and the debug
+ * mappings there is a loop to flush iprot mappings. Ramming doesn't do
+ * branches, but the secondary threads don't need to be nearly as smart
+ * (i.e. we don't need to worry about invalidating the mapping we're
+ * standing on).
+ */
+
+ /* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
+ for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
+ rc = a2_scom_ram(scom, thread, *p, 0);
+ if (rc)
+ goto scom_fail;
+ }
+
+scom_fail:
+ if (rc)
+ pr_err("Setting up initial TLB failed, err %d\n", rc);
+
+ if (rc == -SCOM_RAMC_INTERRUPT) {
+ /* Interrupt, dump some status */
+ int rc[10];
+ u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
+ rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
+ rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
+ rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
+ rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
+ rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
+ rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
+ rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
+ rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
+ rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
+ rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
+ pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
+ pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
+ pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
+ pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
+ pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
+ pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
+ pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
+ pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
+ pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
+ pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
+ }
+
+ return rc;
+}
+
+int __devinit a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+ struct device_node *np)
+{
+ u64 init_iar, init_msr, init_ccr2;
+ unsigned long start_here;
+ int rc, core_setup;
+ scom_map_t scom;
+ u64 pccr0;
+
+ scom = get_scom(lcpu, np, &core_setup);
+ if (!scom) {
+ printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
+ return -1;
+ }
+
+ pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
+
+ pccr0 = scom_read(scom, SCOM_PCCR0);
+ scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
+ SCOM_PCCR0_ENABLE_RAM);
+
+ /* Stop the thead with THRCTL. If we are setting up the TLB we stop all
+ * threads. We also disable asynchronous interrupts while RAMing.
+ */
+ if (core_setup)
+ scom_write(scom, SCOM_THRCTL_OR,
+ SCOM_THRCTL_T0_STOP |
+ SCOM_THRCTL_T1_STOP |
+ SCOM_THRCTL_T2_STOP |
+ SCOM_THRCTL_T3_STOP |
+ SCOM_THRCTL_ASYNC_DIS);
+ else
+ scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
+
+ /* Flush its pipeline just in case */
+ scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
+ SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
+
+ a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
+ a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
+ a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
+
+ /* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
+ rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
+ if (rc) {
+ pr_err("Failed to set MSR ! err %d\n", rc);
+ return rc;
+ }
+
+ /* RAM in an sync/isync for the sake of it */
+ a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
+ a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
+
+ if (core_setup) {
+ pr_devel("CPU%d is first thread in core, initializing TLB...\n",
+ lcpu);
+ rc = a2_scom_initial_tlb(scom, thr_idx);
+ if (rc)
+ goto fail;
+ }
+
+ start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
+ : generic_secondary_thread_init);
+ pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
+
+ rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
+ rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
+ get_hard_smp_processor_id(lcpu));
+ /*
+ * Tell book3e_secondary_core_init not to set up the TLB, we've
+ * already done that.
+ */
+ rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
+
+ rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
+
+ scom_write(scom, SCOM_RAMC, 0);
+ scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
+ scom_write(scom, SCOM_PCCR0, pccr0);
+fail:
+ pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded");
+ if (rc) {
+ pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
+ init_iar, init_msr, init_ccr2);
+ }
+
+ return rc;
+}
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
new file mode 100644
index 0000000..4052e2259
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/scom_wsp.c
@@ -0,0 +1,77 @@
+/*
+ * SCOM backend for WSP
+ *
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+
+static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
+{
+ struct resource r;
+ u64 xscom_addr;
+
+ if (!of_get_property(dev, "scom-controller", NULL)) {
+ pr_err("%s: device %s is not a SCOM controller\n",
+ __func__, dev->full_name);
+ return SCOM_MAP_INVALID;
+ }
+
+ if (of_address_to_resource(dev, 0, &r)) {
+ pr_debug("Failed to find SCOM controller address\n");
+ return 0;
+ }
+
+ /* Transform the SCOM address into an XSCOM offset */
+ xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
+
+ return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
+}
+
+static void wsp_scom_unmap(scom_map_t map)
+{
+ iounmap((void *)map);
+}
+
+static u64 wsp_scom_read(scom_map_t map, u32 reg)
+{
+ u64 __iomem *addr = (u64 __iomem *)map;
+
+ return in_be64(addr + reg);
+}
+
+static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
+{
+ u64 __iomem *addr = (u64 __iomem *)map;
+
+ return out_be64(addr + reg, value);
+}
+
+static const struct scom_controller wsp_scom_controller = {
+ .map = wsp_scom_map,
+ .unmap = wsp_scom_unmap,
+ .read = wsp_scom_read,
+ .write = wsp_scom_write
+};
+
+void scom_init_wsp(void)
+{
+ scom_init(&wsp_scom_controller);
+}
diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c
new file mode 100644
index 0000000..11ac2f0
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/setup.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include "wsp.h"
+
+/*
+ * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
+ * Won't work for nodes that are not a descendant of a wsp node.
+ */
+int wsp_get_chip_id(struct device_node *dn)
+{
+ const u32 *p;
+ int rc;
+
+ /* Start looking at the specified node, not its parent */
+ dn = of_node_get(dn);
+ while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
+ dn = of_get_next_parent(dn);
+
+ if (!dn)
+ return -1;
+
+ rc = *p;
+ of_node_put(dn);
+
+ return rc;
+}
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
new file mode 100644
index 0000000..9d20fa9
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -0,0 +1,88 @@
+/*
+ * SMP Support for A2 platforms
+ *
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/dbell.h>
+#include <asm/machdep.h>
+#include <asm/xics.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+static void __devinit smp_a2_setup_cpu(int cpu)
+{
+ doorbell_setup_this_cpu();
+
+ if (cpu != boot_cpuid)
+ xics_setup_cpu();
+}
+
+int __devinit smp_a2_kick_cpu(int nr)
+{
+ const char *enable_method;
+ struct device_node *np;
+ int thr_idx;
+
+ if (nr < 0 || nr >= NR_CPUS)
+ return -ENOENT;
+
+ np = of_get_cpu_node(nr, &thr_idx);
+ if (!np)
+ return -ENODEV;
+
+ enable_method = of_get_property(np, "enable-method", NULL);
+ pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
+
+ if (!enable_method) {
+ printk(KERN_ERR "CPU%d has no enable-method\n", nr);
+ return -ENOENT;
+ } else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
+ if (a2_scom_startup_cpu(nr, thr_idx, np))
+ return -1;
+ } else {
+ printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
+ nr, enable_method);
+ return -EINVAL;
+ }
+
+ /*
+ * The processor is currently spinning, waiting for the
+ * cpu_start field to become non-zero After we set cpu_start,
+ * the processor will continue on to secondary_start
+ */
+ paca[nr].cpu_start = 1;
+
+ return 0;
+}
+
+static int __init smp_a2_probe(void)
+{
+ return cpus_weight(cpu_possible_map);
+}
+
+static struct smp_ops_t a2_smp_ops = {
+ .message_pass = smp_muxed_ipi_message_pass,
+ .cause_ipi = doorbell_cause_ipi,
+ .probe = smp_a2_probe,
+ .kick_cpu = smp_a2_kick_cpu,
+ .setup_cpu = smp_a2_setup_cpu,
+};
+
+void __init a2_setup_smp(void)
+{
+ smp_ops = &a2_smp_ops;
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
new file mode 100644
index 0000000..7c3e087
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -0,0 +1,17 @@
+#ifndef __WSP_H
+#define __WSP_H
+
+#include <asm/wsp.h>
+
+extern void wsp_setup_pci(void);
+extern void scom_init_wsp(void);
+
+extern void a2_setup_smp(void);
+extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+ struct device_node *np);
+int smp_a2_cpu_bootable(unsigned int nr);
+int __devinit smp_a2_kick_cpu(int nr);
+
+void opb_pic_init(void);
+
+#endif /* __WSP_H */
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 3965828..d775fd1 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -12,3 +12,13 @@
depends on PCI_MSI
default y if MPIC
default y if FSL_PCI
+
+source "arch/powerpc/sysdev/xics/Kconfig"
+
+config PPC_SCOM
+ bool
+
+config SCOM_DEBUGFS
+ bool "Expose SCOM controllers via debugfs"
+ depends on PPC_SCOM
+ default n
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 1e0c933..6076e00 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -57,3 +57,9 @@
ifeq ($(CONFIG_SUSPEND),y)
obj-$(CONFIG_6xx) += 6xx-suspend.o
endif
+
+obj-$(CONFIG_PPC_SCOM) += scom.o
+
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
+obj-$(CONFIG_PPC_XICS) += xics/
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 1636dd8..bd0d540 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -216,7 +216,7 @@
AXON_RAM_DEVICE_NAME, axon_ram_bank_id, bank->size >> 20);
bank->ph_addr = resource.start;
- bank->io_addr = (unsigned long) ioremap_flags(
+ bank->io_addr = (unsigned long) ioremap_prot(
bank->ph_addr, bank->size, _PAGE_NO_CACHE);
if (bank->io_addr == 0) {
dev_err(&device->dev, "ioremap() failed\n");
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index e0bc944..350787c 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -58,21 +58,21 @@
static void cpm_mask_irq(struct irq_data *d)
{
- unsigned int cpm_vec = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
}
static void cpm_unmask_irq(struct irq_data *d)
{
- unsigned int cpm_vec = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
}
static void cpm_end_irq(struct irq_data *d)
{
- unsigned int cpm_vec = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
}
@@ -157,7 +157,7 @@
goto end;
/* Initialize the CPM interrupt controller. */
- hwirq = (unsigned int)irq_map[sirq].hwirq;
+ hwirq = (unsigned int)virq_to_hw(sirq);
out_be32(&cpic_reg->cpic_cicr,
(CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
((hwirq/2) << 13) | CICR_HP_MASK);
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 5495c1b..bcab50e 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -81,7 +81,7 @@
static void cpm2_mask_irq(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = virq_to_hw(d->irq);
+ unsigned int irq_nr = irqd_to_hwirq(d);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
@@ -93,7 +93,7 @@
static void cpm2_unmask_irq(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = virq_to_hw(d->irq);
+ unsigned int irq_nr = irqd_to_hwirq(d);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
@@ -105,7 +105,7 @@
static void cpm2_ack(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = virq_to_hw(d->irq);
+ unsigned int irq_nr = irqd_to_hwirq(d);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
@@ -116,7 +116,7 @@
static void cpm2_end_irq(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = virq_to_hw(d->irq);
+ unsigned int irq_nr = irqd_to_hwirq(d);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
@@ -133,7 +133,7 @@
static int cpm2_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
- unsigned int src = virq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned int vold, vnew, edibit;
/* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or
diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
index 54fb192..1164158 100644
--- a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
+++ b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
@@ -106,10 +106,10 @@
goto out_free;
}
- cache_sram->base_virt = ioremap_flags(cache_sram->base_phys,
+ cache_sram->base_virt = ioremap_prot(cache_sram->base_phys,
cache_sram->size, _PAGE_COHERENT | PAGE_KERNEL);
if (!cache_sram->base_virt) {
- dev_err(&dev->dev, "%s: ioremap_flags failed\n",
+ dev_err(&dev->dev, "%s: ioremap_prot failed\n",
dev->dev.of_node->full_name);
ret = -ENOMEM;
goto out_release;
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index d5679dc..92e7833 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -110,7 +110,7 @@
list_for_each_entry(entry, &pdev->msi_list, list) {
if (entry->irq == NO_IRQ)
continue;
- msi_data = irq_get_handler_data(entry->irq);
+ msi_data = irq_get_chip_data(entry->irq);
irq_set_msi_desc(entry->irq, NULL);
msi_bitmap_free_hwirqs(&msi_data->bitmap,
virq_to_hw(entry->irq), 1);
@@ -168,7 +168,7 @@
rc = -ENOSPC;
goto out_free;
}
- irq_set_handler_data(virq, msi_data);
+ /* chip_data is msi_data via host->hostdata in host->map() */
irq_set_msi_desc(virq, entry);
fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
@@ -193,7 +193,7 @@
u32 have_shift = 0;
struct fsl_msi_cascade_data *cascade_data;
- cascade_data = (struct fsl_msi_cascade_data *)irq_get_handler_data(irq);
+ cascade_data = irq_get_handler_data(irq);
msi_data = cascade_data->msi_data;
raw_spin_lock(&desc->lock);
@@ -253,7 +253,7 @@
static int fsl_of_msi_remove(struct platform_device *ofdev)
{
- struct fsl_msi *msi = ofdev->dev.platform_data;
+ struct fsl_msi *msi = platform_get_drvdata(ofdev);
int virq, i;
struct fsl_msi_cascade_data *cascade_data;
@@ -304,8 +304,10 @@
return 0;
}
+static const struct of_device_id fsl_of_msi_ids[];
static int __devinit fsl_of_msi_probe(struct platform_device *dev)
{
+ const struct of_device_id *match;
struct fsl_msi *msi;
struct resource res;
int err, i, j, irq_index, count;
@@ -316,9 +318,10 @@
u32 offset;
static const u32 all_avail[] = { 0, NR_MSI_IRQS };
- if (!dev->dev.of_match)
+ match = of_match_device(fsl_of_msi_ids, &dev->dev);
+ if (!match)
return -EINVAL;
- features = dev->dev.of_match->data;
+ features = match->data;
printk(KERN_DEBUG "Setting up Freescale MSI support\n");
@@ -327,7 +330,7 @@
dev_err(&dev->dev, "No memory for MSI structure\n");
return -ENOMEM;
}
- dev->dev.platform_data = msi;
+ platform_set_drvdata(dev, msi);
msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
NR_MSI_IRQS, &fsl_msi_host_ops, 0);
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 142770c..d18bb27 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -185,18 +185,6 @@
return 0;
}
-static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
-{
- /* Make sure irq is masked in hardware */
- i8259_mask_irq(irq_get_irq_data(virq));
-
- /* remove chip and handler */
- irq_set_chip_and_handler(virq, NULL, NULL);
-
- /* Make sure it's completed */
- synchronize_irq(virq);
-}
-
static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -220,7 +208,6 @@
static struct irq_host_ops i8259_host_ops = {
.match = i8259_host_match,
.map = i8259_host_map,
- .unmap = i8259_host_unmap,
.xlate = i8259_host_xlate,
};
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index fa438be..7367d17 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -18,7 +18,7 @@
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/signal.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/spinlock.h>
@@ -521,12 +521,10 @@
return primary_ipic;
}
-#define ipic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
-
static void ipic_unmask_irq(struct irq_data *d)
{
struct ipic *ipic = ipic_from_irq(d->irq);
- unsigned int src = ipic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 temp;
@@ -542,7 +540,7 @@
static void ipic_mask_irq(struct irq_data *d)
{
struct ipic *ipic = ipic_from_irq(d->irq);
- unsigned int src = ipic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 temp;
@@ -562,7 +560,7 @@
static void ipic_ack_irq(struct irq_data *d)
{
struct ipic *ipic = ipic_from_irq(d->irq);
- unsigned int src = ipic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 temp;
@@ -581,7 +579,7 @@
static void ipic_mask_irq_and_ack(struct irq_data *d)
{
struct ipic *ipic = ipic_from_irq(d->irq);
- unsigned int src = ipic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 temp;
@@ -604,7 +602,7 @@
static int ipic_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
struct ipic *ipic = ipic_from_irq(d->irq);
- unsigned int src = ipic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
@@ -793,7 +791,7 @@
int ipic_set_priority(unsigned int virq, unsigned int priority)
{
struct ipic *ipic = ipic_from_irq(virq);
- unsigned int src = ipic_irq_to_hw(virq);
+ unsigned int src = virq_to_hw(virq);
u32 temp;
if (priority > 7)
@@ -821,7 +819,7 @@
void ipic_set_highest_priority(unsigned int virq)
{
struct ipic *ipic = ipic_from_irq(virq);
- unsigned int src = ipic_irq_to_hw(virq);
+ unsigned int src = virq_to_hw(virq);
u32 temp;
temp = ipic_read(ipic->regs, IPIC_SICFR);
@@ -902,7 +900,7 @@
u32 sercr;
} ipic_saved_state;
-static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+static int ipic_suspend(void)
{
struct ipic *ipic = primary_ipic;
@@ -933,7 +931,7 @@
return 0;
}
-static int ipic_resume(struct sys_device *sdev)
+static void ipic_resume(void)
{
struct ipic *ipic = primary_ipic;
@@ -949,44 +947,26 @@
ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
-
- return 0;
}
#else
#define ipic_suspend NULL
#define ipic_resume NULL
#endif
-static struct sysdev_class ipic_sysclass = {
- .name = "ipic",
+static struct syscore_ops ipic_syscore_ops = {
.suspend = ipic_suspend,
.resume = ipic_resume,
};
-static struct sys_device device_ipic = {
- .id = 0,
- .cls = &ipic_sysclass,
-};
-
-static int __init init_ipic_sysfs(void)
+static int __init init_ipic_syscore(void)
{
- int rc;
-
if (!primary_ipic || !primary_ipic->regs)
return -ENODEV;
- printk(KERN_DEBUG "Registering ipic with sysfs...\n");
- rc = sysdev_class_register(&ipic_sysclass);
- if (rc) {
- printk(KERN_ERR "Failed registering ipic sys class\n");
- return -ENODEV;
- }
- rc = sysdev_register(&device_ipic);
- if (rc) {
- printk(KERN_ERR "Failed registering ipic sys device\n");
- return -ENODEV;
- }
+ printk(KERN_DEBUG "Registering ipic system core operations\n");
+ register_syscore_ops(&ipic_syscore_ops);
+
return 0;
}
-subsys_initcall(init_ipic_sysfs);
+subsys_initcall(init_ipic_syscore);
diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 2073242..ddc877a 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -115,6 +115,8 @@
int ret;
nvram_node = of_find_node_by_type(NULL, "nvram");
+ if (!nvram_node)
+ nvram_node = of_find_compatible_node(NULL, NULL, "nvram");
if (!nvram_node) {
printk(KERN_WARNING "nvram: no node found in device-tree\n");
return -ENODEV;
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index a88800f..20924f2 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -28,7 +28,7 @@
static void mpc8xx_unmask_irq(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
bit = irq_nr & 0x1f;
word = irq_nr >> 5;
@@ -40,7 +40,7 @@
static void mpc8xx_mask_irq(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
bit = irq_nr & 0x1f;
word = irq_nr >> 5;
@@ -52,7 +52,7 @@
static void mpc8xx_ack(struct irq_data *d)
{
int bit;
- unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
bit = irq_nr & 0x1f;
out_be32(&siu_reg->sc_sipend, 1 << (31-bit));
@@ -61,7 +61,7 @@
static void mpc8xx_end_irq(struct irq_data *d)
{
int bit, word;
- unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
bit = irq_nr & 0x1f;
word = irq_nr >> 5;
@@ -73,7 +73,7 @@
static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
if (flow_type & IRQ_TYPE_EDGE_FALLING) {
- irq_hw_number_t hw = (unsigned int)irq_map[d->irq].hwirq;
+ irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d);
unsigned int siel = in_be32(&siu_reg->sc_siel);
/* only external IRQ senses are programmable */
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 0892a28..fb4963a 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -163,7 +163,7 @@
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+ setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
@@ -176,7 +176,7 @@
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+ clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
@@ -186,7 +186,7 @@
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+ out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
}
static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
@@ -199,14 +199,14 @@
case IRQ_TYPE_EDGE_FALLING:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_ICR,
- mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
case IRQ_TYPE_EDGE_BOTH:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_ICR,
- mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
@@ -221,7 +221,7 @@
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- unsigned long gpio = virq_to_hw(d->irq);
+ unsigned long gpio = irqd_to_hwirq(d);
void __iomem *reg;
unsigned int shift;
unsigned long flags;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index f91c065..3a8de5b 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -6,6 +6,7 @@
* with various broken implementations of this HW.
*
* Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
@@ -27,6 +28,7 @@
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/syscore_ops.h>
#include <asm/ptrace.h>
#include <asm/signal.h>
@@ -218,6 +220,28 @@
_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
}
+static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+{
+ unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
+ ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+
+ if (tm >= 4)
+ offset += 0x1000 / 4;
+
+ return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
+}
+
+static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
+{
+ unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
+ ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+
+ if (tm >= 4)
+ offset += 0x1000 / 4;
+
+ _mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
+}
+
static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg)
{
unsigned int cpu = mpic_processor_id(mpic);
@@ -268,6 +292,8 @@
#define mpic_write(b,r,v) _mpic_write(mpic->reg_type,&(b),(r),(v))
#define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i))
#define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v))
+#define mpic_tm_read(i) _mpic_tm_read(mpic,(i))
+#define mpic_tm_write(i,v) _mpic_tm_write(mpic,(i),(v))
#define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i))
#define mpic_cpu_write(i,v) _mpic_cpu_write(mpic,(i),(v))
#define mpic_irq_read(s,r) _mpic_irq_read(mpic,(s),(r))
@@ -607,8 +633,6 @@
}
#endif
-#define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
-
/* Find an mpic associated with a given linux interrupt */
static struct mpic *mpic_find(unsigned int irq)
{
@@ -621,11 +645,18 @@
/* Determine if the linux irq is an IPI */
static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
{
- unsigned int src = mpic_irq_to_hw(irq);
+ unsigned int src = virq_to_hw(irq);
return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
}
+/* Determine if the linux irq is a timer */
+static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
+{
+ unsigned int src = virq_to_hw(irq);
+
+ return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
+}
/* Convert a cpu mask from logical to physical cpu numbers. */
static inline u32 mpic_physmask(u32 cpumask)
@@ -633,7 +664,7 @@
int i;
u32 mask = 0;
- for (i = 0; i < NR_CPUS; ++i, cpumask >>= 1)
+ for (i = 0; i < min(32, NR_CPUS); ++i, cpumask >>= 1)
mask |= (cpumask & 1) << get_hard_smp_processor_id(i);
return mask;
}
@@ -674,7 +705,7 @@
{
unsigned int loops = 100000;
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, d->irq, src);
@@ -695,7 +726,7 @@
{
unsigned int loops = 100000;
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
DBG("%s: disable_irq: %d (src %d)\n", mpic->name, d->irq, src);
@@ -733,7 +764,7 @@
static void mpic_unmask_ht_irq(struct irq_data *d)
{
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
mpic_unmask_irq(d);
@@ -744,7 +775,7 @@
static unsigned int mpic_startup_ht_irq(struct irq_data *d)
{
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
mpic_unmask_irq(d);
mpic_startup_ht_interrupt(mpic, src, irqd_is_level_type(d));
@@ -755,7 +786,7 @@
static void mpic_shutdown_ht_irq(struct irq_data *d)
{
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
mpic_shutdown_ht_interrupt(mpic, src);
mpic_mask_irq(d);
@@ -764,7 +795,7 @@
static void mpic_end_ht_irq(struct irq_data *d)
{
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
#ifdef DEBUG_IRQ
DBG("%s: end_irq: %d\n", mpic->name, d->irq);
@@ -785,7 +816,7 @@
static void mpic_unmask_ipi(struct irq_data *d)
{
struct mpic *mpic = mpic_from_ipi(d);
- unsigned int src = mpic_irq_to_hw(d->irq) - mpic->ipi_vecs[0];
+ unsigned int src = virq_to_hw(d->irq) - mpic->ipi_vecs[0];
DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, d->irq, src);
mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
@@ -812,27 +843,42 @@
#endif /* CONFIG_SMP */
+static void mpic_unmask_tm(struct irq_data *d)
+{
+ struct mpic *mpic = mpic_from_irq_data(d);
+ unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0];
+
+ DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, irq, src);
+ mpic_tm_write(src, mpic_tm_read(src) & ~MPIC_VECPRI_MASK);
+ mpic_tm_read(src);
+}
+
+static void mpic_mask_tm(struct irq_data *d)
+{
+ struct mpic *mpic = mpic_from_irq_data(d);
+ unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0];
+
+ mpic_tm_write(src, mpic_tm_read(src) | MPIC_VECPRI_MASK);
+ mpic_tm_read(src);
+}
+
int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
bool force)
{
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
if (mpic->flags & MPIC_SINGLE_DEST_CPU) {
int cpuid = irq_choose_cpu(cpumask);
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
} else {
- cpumask_var_t tmp;
+ u32 mask = cpumask_bits(cpumask)[0];
- alloc_cpumask_var(&tmp, GFP_KERNEL);
-
- cpumask_and(tmp, cpumask, cpu_online_mask);
+ mask &= cpumask_bits(cpu_online_mask)[0];
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
- mpic_physmask(cpumask_bits(tmp)[0]));
-
- free_cpumask_var(tmp);
+ mpic_physmask(mask));
}
return 0;
@@ -862,7 +908,7 @@
int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
struct mpic *mpic = mpic_from_irq_data(d);
- unsigned int src = mpic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned int vecpri, vold, vnew;
DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
@@ -898,7 +944,7 @@
void mpic_set_vector(unsigned int virq, unsigned int vector)
{
struct mpic *mpic = mpic_from_irq(virq);
- unsigned int src = mpic_irq_to_hw(virq);
+ unsigned int src = virq_to_hw(virq);
unsigned int vecpri;
DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n",
@@ -916,7 +962,7 @@
void mpic_set_destination(unsigned int virq, unsigned int cpuid)
{
struct mpic *mpic = mpic_from_irq(virq);
- unsigned int src = mpic_irq_to_hw(virq);
+ unsigned int src = virq_to_hw(virq);
DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n",
mpic, virq, src, cpuid);
@@ -942,6 +988,12 @@
};
#endif /* CONFIG_SMP */
+static struct irq_chip mpic_tm_chip = {
+ .irq_mask = mpic_mask_tm,
+ .irq_unmask = mpic_unmask_tm,
+ .irq_eoi = mpic_end_irq,
+};
+
#ifdef CONFIG_MPIC_U3_HT_IRQS
static struct irq_chip mpic_irq_ht_chip = {
.irq_startup = mpic_startup_ht_irq,
@@ -985,6 +1037,16 @@
}
#endif /* CONFIG_SMP */
+ if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) {
+ WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+
+ DBG("mpic: mapping as timer\n");
+ irq_set_chip_data(virq, mpic);
+ irq_set_chip_and_handler(virq, &mpic->hc_tm,
+ handle_fasteoi_irq);
+ return 0;
+ }
+
if (hw >= mpic->irq_count)
return -EINVAL;
@@ -1025,6 +1087,7 @@
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
+ struct mpic *mpic = h->host_data;
static unsigned char map_mpic_senses[4] = {
IRQ_TYPE_EDGE_RISING,
IRQ_TYPE_LEVEL_LOW,
@@ -1033,7 +1096,38 @@
};
*out_hwirq = intspec[0];
- if (intsize > 1) {
+ if (intsize >= 4 && (mpic->flags & MPIC_FSL)) {
+ /*
+ * Freescale MPIC with extended intspec:
+ * First two cells are as usual. Third specifies
+ * an "interrupt type". Fourth is type-specific data.
+ *
+ * See Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
+ */
+ switch (intspec[2]) {
+ case 0:
+ case 1: /* no EISR/EIMR support for now, treat as shared IRQ */
+ break;
+ case 2:
+ if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs))
+ return -EINVAL;
+
+ *out_hwirq = mpic->ipi_vecs[intspec[0]];
+ break;
+ case 3:
+ if (intspec[0] >= ARRAY_SIZE(mpic->timer_vecs))
+ return -EINVAL;
+
+ *out_hwirq = mpic->timer_vecs[intspec[0]];
+ break;
+ default:
+ pr_debug("%s: unknown irq type %u\n",
+ __func__, intspec[2]);
+ return -EINVAL;
+ }
+
+ *out_flags = map_mpic_senses[intspec[1] & 3];
+ } else if (intsize > 1) {
u32 mask = 0x3;
/* Apple invented a new race of encoding on machines with
@@ -1109,6 +1203,9 @@
mpic->hc_ipi.name = name;
#endif /* CONFIG_SMP */
+ mpic->hc_tm = mpic_tm_chip;
+ mpic->hc_tm.name = name;
+
mpic->flags = flags;
mpic->isu_size = isu_size;
mpic->irq_count = irq_count;
@@ -1119,10 +1216,14 @@
else
intvec_top = 255;
- mpic->timer_vecs[0] = intvec_top - 8;
- mpic->timer_vecs[1] = intvec_top - 7;
- mpic->timer_vecs[2] = intvec_top - 6;
- mpic->timer_vecs[3] = intvec_top - 5;
+ mpic->timer_vecs[0] = intvec_top - 12;
+ mpic->timer_vecs[1] = intvec_top - 11;
+ mpic->timer_vecs[2] = intvec_top - 10;
+ mpic->timer_vecs[3] = intvec_top - 9;
+ mpic->timer_vecs[4] = intvec_top - 8;
+ mpic->timer_vecs[5] = intvec_top - 7;
+ mpic->timer_vecs[6] = intvec_top - 6;
+ mpic->timer_vecs[7] = intvec_top - 5;
mpic->ipi_vecs[0] = intvec_top - 4;
mpic->ipi_vecs[1] = intvec_top - 3;
mpic->ipi_vecs[2] = intvec_top - 2;
@@ -1132,6 +1233,8 @@
/* Check for "big-endian" in device-tree */
if (node && of_get_property(node, "big-endian", NULL) != NULL)
mpic->flags |= MPIC_BIG_ENDIAN;
+ if (node && of_device_is_compatible(node, "fsl,mpic"))
+ mpic->flags |= MPIC_FSL;
/* Look for protected sources */
if (node) {
@@ -1323,15 +1426,17 @@
/* Set current processor priority to max */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
- /* Initialize timers: just disable them all */
+ /* Initialize timers to our reserved vectors and mask them for now */
for (i = 0; i < 4; i++) {
mpic_write(mpic->tmregs,
i * MPIC_INFO(TIMER_STRIDE) +
- MPIC_INFO(TIMER_DESTINATION), 0);
+ MPIC_INFO(TIMER_DESTINATION),
+ 1 << hard_smp_processor_id());
mpic_write(mpic->tmregs,
i * MPIC_INFO(TIMER_STRIDE) +
MPIC_INFO(TIMER_VECTOR_PRI),
MPIC_VECPRI_MASK |
+ (9 << MPIC_VECPRI_PRIORITY_SHIFT) |
(mpic->timer_vecs[0] + i));
}
@@ -1427,7 +1532,7 @@
void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
{
struct mpic *mpic = mpic_find(irq);
- unsigned int src = mpic_irq_to_hw(irq);
+ unsigned int src = virq_to_hw(irq);
unsigned long flags;
u32 reg;
@@ -1440,6 +1545,11 @@
~MPIC_VECPRI_PRIORITY_MASK;
mpic_ipi_write(src - mpic->ipi_vecs[0],
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
+ } else if (mpic_is_tm(mpic, irq)) {
+ reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
+ ~MPIC_VECPRI_PRIORITY_MASK;
+ mpic_tm_write(src - mpic->timer_vecs[0],
+ reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
} else {
reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI))
& ~MPIC_VECPRI_PRIORITY_MASK;
@@ -1619,46 +1729,28 @@
}
}
-static void mpic_send_ipi(unsigned int ipi_no, const struct cpumask *cpu_mask)
+void smp_mpic_message_pass(int cpu, int msg)
{
struct mpic *mpic = mpic_primary;
+ u32 physmask;
BUG_ON(mpic == NULL);
-#ifdef DEBUG_IPI
- DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
-#endif
-
- mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
- ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE),
- mpic_physmask(cpumask_bits(cpu_mask)[0]));
-}
-
-void smp_mpic_message_pass(int target, int msg)
-{
- cpumask_var_t tmp;
-
/* make sure we're sending something that translates to an IPI */
if ((unsigned int)msg > 3) {
printk("SMP %d: smp_message_pass: unknown msg %d\n",
smp_processor_id(), msg);
return;
}
- switch (target) {
- case MSG_ALL:
- mpic_send_ipi(msg, cpu_online_mask);
- break;
- case MSG_ALL_BUT_SELF:
- alloc_cpumask_var(&tmp, GFP_NOWAIT);
- cpumask_andnot(tmp, cpu_online_mask,
- cpumask_of(smp_processor_id()));
- mpic_send_ipi(msg, tmp);
- free_cpumask_var(tmp);
- break;
- default:
- mpic_send_ipi(msg, cpumask_of(target));
- break;
- }
+
+#ifdef DEBUG_IPI
+ DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, msg);
+#endif
+
+ physmask = 1 << get_hard_smp_processor_id(cpu);
+
+ mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
+ msg * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE), physmask);
}
int __init smp_mpic_probe(void)
@@ -1702,9 +1794,8 @@
#endif /* CONFIG_SMP */
#ifdef CONFIG_PM
-static int mpic_suspend(struct sys_device *dev, pm_message_t state)
+static void mpic_suspend_one(struct mpic *mpic)
{
- struct mpic *mpic = container_of(dev, struct mpic, sysdev);
int i;
for (i = 0; i < mpic->num_sources; i++) {
@@ -1713,13 +1804,22 @@
mpic->save_data[i].dest =
mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION));
}
+}
+
+static int mpic_suspend(void)
+{
+ struct mpic *mpic = mpics;
+
+ while (mpic) {
+ mpic_suspend_one(mpic);
+ mpic = mpic->next;
+ }
return 0;
}
-static int mpic_resume(struct sys_device *dev)
+static void mpic_resume_one(struct mpic *mpic)
{
- struct mpic *mpic = container_of(dev, struct mpic, sysdev);
int i;
for (i = 0; i < mpic->num_sources; i++) {
@@ -1746,33 +1846,28 @@
}
#endif
} /* end for loop */
-
- return 0;
}
-#endif
-static struct sysdev_class mpic_sysclass = {
-#ifdef CONFIG_PM
+static void mpic_resume(void)
+{
+ struct mpic *mpic = mpics;
+
+ while (mpic) {
+ mpic_resume_one(mpic);
+ mpic = mpic->next;
+ }
+}
+
+static struct syscore_ops mpic_syscore_ops = {
.resume = mpic_resume,
.suspend = mpic_suspend,
-#endif
- .name = "mpic",
};
static int mpic_init_sys(void)
{
- struct mpic *mpic = mpics;
- int error, id = 0;
-
- error = sysdev_class_register(&mpic_sysclass);
-
- while (mpic && !error) {
- mpic->sysdev.cls = &mpic_sysclass;
- mpic->sysdev.id = id++;
- error = sysdev_register(&mpic->sysdev);
- mpic = mpic->next;
- }
- return error;
+ register_syscore_ops(&mpic_syscore_ops);
+ return 0;
}
device_initcall(mpic_init_sys);
+#endif
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index e9c633c..14d1302 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -78,7 +78,7 @@
static void mv64x60_mask_low(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
@@ -91,7 +91,7 @@
static void mv64x60_unmask_low(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
@@ -115,7 +115,7 @@
static void mv64x60_mask_high(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
@@ -128,7 +128,7 @@
static void mv64x60_unmask_high(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
@@ -152,7 +152,7 @@
static void mv64x60_mask_gpp(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
@@ -165,7 +165,7 @@
static void mv64x60_mask_ack_gpp(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
@@ -180,7 +180,7 @@
static void mv64x60_unmask_gpp(struct irq_data *d)
{
- int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+ int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
unsigned long flags;
spin_lock_irqsave(&mv64x60_lock, flags);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 832d692..b2acda0 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -197,12 +197,10 @@
return irq_data_get_irq_chip_data(d);
}
-#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
-
static void qe_ic_unmask_irq(struct irq_data *d)
{
struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
- unsigned int src = virq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 temp;
@@ -218,7 +216,7 @@
static void qe_ic_mask_irq(struct irq_data *d)
{
struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
- unsigned int src = virq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 temp;
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
new file mode 100644
index 0000000..b2593ce
--- /dev/null
+++ b/arch/powerpc/sysdev/scom.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ * and David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <asm/prom.h>
+#include <asm/scom.h>
+
+const struct scom_controller *scom_controller;
+EXPORT_SYMBOL_GPL(scom_controller);
+
+struct device_node *scom_find_parent(struct device_node *node)
+{
+ struct device_node *par, *tmp;
+ const u32 *p;
+
+ for (par = of_node_get(node); par;) {
+ if (of_get_property(par, "scom-controller", NULL))
+ break;
+ p = of_get_property(par, "scom-parent", NULL);
+ tmp = par;
+ if (p == NULL)
+ par = of_get_parent(par);
+ else
+ par = of_find_node_by_phandle(*p);
+ of_node_put(tmp);
+ }
+ return par;
+}
+EXPORT_SYMBOL_GPL(scom_find_parent);
+
+scom_map_t scom_map_device(struct device_node *dev, int index)
+{
+ struct device_node *parent;
+ unsigned int cells, size;
+ const u32 *prop;
+ u64 reg, cnt;
+ scom_map_t ret;
+
+ parent = scom_find_parent(dev);
+
+ if (parent == NULL)
+ return 0;
+
+ prop = of_get_property(parent, "#scom-cells", NULL);
+ cells = prop ? *prop : 1;
+
+ prop = of_get_property(dev, "scom-reg", &size);
+ if (!prop)
+ return 0;
+ size >>= 2;
+
+ if (index >= (size / (2*cells)))
+ return 0;
+
+ reg = of_read_number(&prop[index * cells * 2], cells);
+ cnt = of_read_number(&prop[index * cells * 2 + cells], cells);
+
+ ret = scom_map(parent, reg, cnt);
+ of_node_put(parent);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(scom_map_device);
+
+#ifdef CONFIG_SCOM_DEBUGFS
+struct scom_debug_entry {
+ struct device_node *dn;
+ unsigned long addr;
+ scom_map_t map;
+ spinlock_t lock;
+ char name[8];
+ struct debugfs_blob_wrapper blob;
+};
+
+static int scom_addr_set(void *data, u64 val)
+{
+ struct scom_debug_entry *ent = data;
+
+ ent->addr = 0;
+ scom_unmap(ent->map);
+
+ ent->map = scom_map(ent->dn, val, 1);
+ if (scom_map_ok(ent->map))
+ ent->addr = val;
+ else
+ return -EFAULT;
+
+ return 0;
+}
+
+static int scom_addr_get(void *data, u64 *val)
+{
+ struct scom_debug_entry *ent = data;
+ *val = ent->addr;
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(scom_addr_fops, scom_addr_get, scom_addr_set,
+ "0x%llx\n");
+
+static int scom_val_set(void *data, u64 val)
+{
+ struct scom_debug_entry *ent = data;
+
+ if (!scom_map_ok(ent->map))
+ return -EFAULT;
+
+ scom_write(ent->map, 0, val);
+
+ return 0;
+}
+
+static int scom_val_get(void *data, u64 *val)
+{
+ struct scom_debug_entry *ent = data;
+
+ if (!scom_map_ok(ent->map))
+ return -EFAULT;
+
+ *val = scom_read(ent->map, 0);
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(scom_val_fops, scom_val_get, scom_val_set,
+ "0x%llx\n");
+
+static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
+ int i)
+{
+ struct scom_debug_entry *ent;
+ struct dentry *dir;
+
+ ent = kzalloc(sizeof(*ent), GFP_KERNEL);
+ if (!ent)
+ return -ENOMEM;
+
+ ent->dn = of_node_get(dn);
+ ent->map = SCOM_MAP_INVALID;
+ spin_lock_init(&ent->lock);
+ snprintf(ent->name, 8, "scom%d", i);
+ ent->blob.data = dn->full_name;
+ ent->blob.size = strlen(dn->full_name);
+
+ dir = debugfs_create_dir(ent->name, root);
+ if (!dir) {
+ of_node_put(dn);
+ kfree(ent);
+ return -1;
+ }
+
+ debugfs_create_file("addr", 0600, dir, ent, &scom_addr_fops);
+ debugfs_create_file("value", 0600, dir, ent, &scom_val_fops);
+ debugfs_create_blob("path", 0400, dir, &ent->blob);
+
+ return 0;
+}
+
+static int scom_debug_init(void)
+{
+ struct device_node *dn;
+ struct dentry *root;
+ int i, rc;
+
+ root = debugfs_create_dir("scom", powerpc_debugfs_root);
+ if (!root)
+ return -1;
+
+ i = rc = 0;
+ for_each_node_with_property(dn, "scom-controller")
+ rc |= scom_debug_init_one(root, dn, i++);
+
+ return rc;
+}
+device_initcall(scom_debug_init);
+#endif /* CONFIG_SCOM_DEBUGFS */
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 5d91385..984cd20 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -41,8 +41,6 @@
#define UIC_VR 0x7
#define UIC_VCR 0x8
-#define uic_irq_to_hw(virq) (irq_map[virq].hwirq)
-
struct uic *primary_uic;
struct uic {
@@ -58,7 +56,7 @@
static void uic_unmask_irq(struct irq_data *d)
{
struct uic *uic = irq_data_get_irq_chip_data(d);
- unsigned int src = uic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 er, sr;
@@ -76,7 +74,7 @@
static void uic_mask_irq(struct irq_data *d)
{
struct uic *uic = irq_data_get_irq_chip_data(d);
- unsigned int src = uic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 er;
@@ -90,7 +88,7 @@
static void uic_ack_irq(struct irq_data *d)
{
struct uic *uic = irq_data_get_irq_chip_data(d);
- unsigned int src = uic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
spin_lock_irqsave(&uic->lock, flags);
@@ -101,7 +99,7 @@
static void uic_mask_ack_irq(struct irq_data *d)
{
struct uic *uic = irq_data_get_irq_chip_data(d);
- unsigned int src = uic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
u32 er, sr;
@@ -126,7 +124,7 @@
static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
struct uic *uic = irq_data_get_irq_chip_data(d);
- unsigned int src = uic_irq_to_hw(d->irq);
+ unsigned int src = irqd_to_hwirq(d);
unsigned long flags;
int trigger, polarity;
u32 tr, pr, mask;
diff --git a/arch/powerpc/sysdev/xics/Kconfig b/arch/powerpc/sysdev/xics/Kconfig
new file mode 100644
index 0000000..0031eda
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/Kconfig
@@ -0,0 +1,13 @@
+config PPC_XICS
+ def_bool n
+ select PPC_SMP_MUXED_IPI
+
+config PPC_ICP_NATIVE
+ def_bool n
+
+config PPC_ICP_HV
+ def_bool n
+
+config PPC_ICS_RTAS
+ def_bool n
+
diff --git a/arch/powerpc/sysdev/xics/Makefile b/arch/powerpc/sysdev/xics/Makefile
new file mode 100644
index 0000000..b75a605
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/Makefile
@@ -0,0 +1,6 @@
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
+obj-y += xics-common.o
+obj-$(CONFIG_PPC_ICP_NATIVE) += icp-native.o
+obj-$(CONFIG_PPC_ICP_HV) += icp-hv.o
+obj-$(CONFIG_PPC_ICS_RTAS) += ics-rtas.o
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
new file mode 100644
index 0000000..9518d36
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2011 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+#include <asm/io.h>
+#include <asm/hvcall.h>
+
+static inline unsigned int icp_hv_get_xirr(unsigned char cppr)
+{
+ unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+ long rc;
+
+ rc = plpar_hcall(H_XIRR, retbuf, cppr);
+ if (rc != H_SUCCESS)
+ panic(" bad return code xirr - rc = %lx\n", rc);
+ return (unsigned int)retbuf[0];
+}
+
+static inline void icp_hv_set_xirr(unsigned int value)
+{
+ long rc = plpar_hcall_norets(H_EOI, value);
+ if (rc != H_SUCCESS)
+ panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+}
+
+static inline void icp_hv_set_cppr(u8 value)
+{
+ long rc = plpar_hcall_norets(H_CPPR, value);
+ if (rc != H_SUCCESS)
+ panic("bad return code cppr - rc = %lx\n", rc);
+}
+
+static inline void icp_hv_set_qirr(int n_cpu , u8 value)
+{
+ long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
+ value);
+ if (rc != H_SUCCESS)
+ panic("bad return code qirr - rc = %lx\n", rc);
+}
+
+static void icp_hv_eoi(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+ iosync();
+ icp_hv_set_xirr((xics_pop_cppr() << 24) | hw_irq);
+}
+
+static void icp_hv_teardown_cpu(void)
+{
+ int cpu = smp_processor_id();
+
+ /* Clear any pending IPI */
+ icp_hv_set_qirr(cpu, 0xff);
+}
+
+static void icp_hv_flush_ipi(void)
+{
+ /* We take the ipi irq but and never return so we
+ * need to EOI the IPI, but want to leave our priority 0
+ *
+ * should we check all the other interrupts too?
+ * should we be flagging idle loop instead?
+ * or creating some task to be scheduled?
+ */
+
+ icp_hv_set_xirr((0x00 << 24) | XICS_IPI);
+}
+
+static unsigned int icp_hv_get_irq(void)
+{
+ unsigned int xirr = icp_hv_get_xirr(xics_cppr_top());
+ unsigned int vec = xirr & 0x00ffffff;
+ unsigned int irq;
+
+ if (vec == XICS_IRQ_SPURIOUS)
+ return NO_IRQ;
+
+ irq = irq_radix_revmap_lookup(xics_host, vec);
+ if (likely(irq != NO_IRQ)) {
+ xics_push_cppr(vec);
+ return irq;
+ }
+
+ /* We don't have a linux mapping, so have rtas mask it. */
+ xics_mask_unknown_vec(vec);
+
+ /* We might learn about it later, so EOI it */
+ icp_hv_set_xirr(xirr);
+
+ return NO_IRQ;
+}
+
+static void icp_hv_set_cpu_priority(unsigned char cppr)
+{
+ xics_set_base_cppr(cppr);
+ icp_hv_set_cppr(cppr);
+ iosync();
+}
+
+#ifdef CONFIG_SMP
+
+static void icp_hv_cause_ipi(int cpu, unsigned long data)
+{
+ icp_hv_set_qirr(cpu, IPI_PRIORITY);
+}
+
+static irqreturn_t icp_hv_ipi_action(int irq, void *dev_id)
+{
+ int cpu = smp_processor_id();
+
+ icp_hv_set_qirr(cpu, 0xff);
+
+ return smp_ipi_demux();
+}
+
+#endif /* CONFIG_SMP */
+
+static const struct icp_ops icp_hv_ops = {
+ .get_irq = icp_hv_get_irq,
+ .eoi = icp_hv_eoi,
+ .set_priority = icp_hv_set_cpu_priority,
+ .teardown_cpu = icp_hv_teardown_cpu,
+ .flush_ipi = icp_hv_flush_ipi,
+#ifdef CONFIG_SMP
+ .ipi_action = icp_hv_ipi_action,
+ .cause_ipi = icp_hv_cause_ipi,
+#endif
+};
+
+int icp_hv_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,ppc-xicp");
+ if (!np)
+ np = of_find_node_by_type(NULL,
+ "PowerPC-External-Interrupt-Presentation");
+ if (!np)
+ return -ENODEV;
+
+ icp_ops = &icp_hv_ops;
+
+ return 0;
+}
+
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
new file mode 100644
index 0000000..1f15ad4
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright 2011 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+
+struct icp_ipl {
+ union {
+ u32 word;
+ u8 bytes[4];
+ } xirr_poll;
+ union {
+ u32 word;
+ u8 bytes[4];
+ } xirr;
+ u32 dummy;
+ union {
+ u32 word;
+ u8 bytes[4];
+ } qirr;
+ u32 link_a;
+ u32 link_b;
+ u32 link_c;
+};
+
+static struct icp_ipl __iomem *icp_native_regs[NR_CPUS];
+
+static inline unsigned int icp_native_get_xirr(void)
+{
+ int cpu = smp_processor_id();
+
+ return in_be32(&icp_native_regs[cpu]->xirr.word);
+}
+
+static inline void icp_native_set_xirr(unsigned int value)
+{
+ int cpu = smp_processor_id();
+
+ out_be32(&icp_native_regs[cpu]->xirr.word, value);
+}
+
+static inline void icp_native_set_cppr(u8 value)
+{
+ int cpu = smp_processor_id();
+
+ out_8(&icp_native_regs[cpu]->xirr.bytes[0], value);
+}
+
+static inline void icp_native_set_qirr(int n_cpu, u8 value)
+{
+ out_8(&icp_native_regs[n_cpu]->qirr.bytes[0], value);
+}
+
+static void icp_native_set_cpu_priority(unsigned char cppr)
+{
+ xics_set_base_cppr(cppr);
+ icp_native_set_cppr(cppr);
+ iosync();
+}
+
+static void icp_native_eoi(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+ iosync();
+ icp_native_set_xirr((xics_pop_cppr() << 24) | hw_irq);
+}
+
+static void icp_native_teardown_cpu(void)
+{
+ int cpu = smp_processor_id();
+
+ /* Clear any pending IPI */
+ icp_native_set_qirr(cpu, 0xff);
+}
+
+static void icp_native_flush_ipi(void)
+{
+ /* We take the ipi irq but and never return so we
+ * need to EOI the IPI, but want to leave our priority 0
+ *
+ * should we check all the other interrupts too?
+ * should we be flagging idle loop instead?
+ * or creating some task to be scheduled?
+ */
+
+ icp_native_set_xirr((0x00 << 24) | XICS_IPI);
+}
+
+static unsigned int icp_native_get_irq(void)
+{
+ unsigned int xirr = icp_native_get_xirr();
+ unsigned int vec = xirr & 0x00ffffff;
+ unsigned int irq;
+
+ if (vec == XICS_IRQ_SPURIOUS)
+ return NO_IRQ;
+
+ irq = irq_radix_revmap_lookup(xics_host, vec);
+ if (likely(irq != NO_IRQ)) {
+ xics_push_cppr(vec);
+ return irq;
+ }
+
+ /* We don't have a linux mapping, so have rtas mask it. */
+ xics_mask_unknown_vec(vec);
+
+ /* We might learn about it later, so EOI it */
+ icp_native_set_xirr(xirr);
+
+ return NO_IRQ;
+}
+
+#ifdef CONFIG_SMP
+
+static void icp_native_cause_ipi(int cpu, unsigned long data)
+{
+ icp_native_set_qirr(cpu, IPI_PRIORITY);
+}
+
+static irqreturn_t icp_native_ipi_action(int irq, void *dev_id)
+{
+ int cpu = smp_processor_id();
+
+ icp_native_set_qirr(cpu, 0xff);
+
+ return smp_ipi_demux();
+}
+
+#endif /* CONFIG_SMP */
+
+static int __init icp_native_map_one_cpu(int hw_id, unsigned long addr,
+ unsigned long size)
+{
+ char *rname;
+ int i, cpu = -1;
+
+ /* This may look gross but it's good enough for now, we don't quite
+ * have a hard -> linux processor id matching.
+ */
+ for_each_possible_cpu(i) {
+ if (!cpu_present(i))
+ continue;
+ if (hw_id == get_hard_smp_processor_id(i)) {
+ cpu = i;
+ break;
+ }
+ }
+
+ /* Fail, skip that CPU. Don't print, it's normal, some XICS come up
+ * with way more entries in there than you have CPUs
+ */
+ if (cpu == -1)
+ return 0;
+
+ rname = kasprintf(GFP_KERNEL, "CPU %d [0x%x] Interrupt Presentation",
+ cpu, hw_id);
+
+ if (!request_mem_region(addr, size, rname)) {
+ pr_warning("icp_native: Could not reserve ICP MMIO"
+ " for CPU %d, interrupt server #0x%x\n",
+ cpu, hw_id);
+ return -EBUSY;
+ }
+
+ icp_native_regs[cpu] = ioremap(addr, size);
+ if (!icp_native_regs[cpu]) {
+ pr_warning("icp_native: Failed ioremap for CPU %d, "
+ "interrupt server #0x%x, addr %#lx\n",
+ cpu, hw_id, addr);
+ release_mem_region(addr, size);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int __init icp_native_init_one_node(struct device_node *np,
+ unsigned int *indx)
+{
+ unsigned int ilen;
+ const u32 *ireg;
+ int i;
+ int reg_tuple_size;
+ int num_servers = 0;
+
+ /* This code does the theorically broken assumption that the interrupt
+ * server numbers are the same as the hard CPU numbers.
+ * This happens to be the case so far but we are playing with fire...
+ * should be fixed one of these days. -BenH.
+ */
+ ireg = of_get_property(np, "ibm,interrupt-server-ranges", &ilen);
+
+ /* Do that ever happen ? we'll know soon enough... but even good'old
+ * f80 does have that property ..
+ */
+ WARN_ON((ireg == NULL) || (ilen != 2*sizeof(u32)));
+
+ if (ireg) {
+ *indx = of_read_number(ireg, 1);
+ if (ilen >= 2*sizeof(u32))
+ num_servers = of_read_number(ireg + 1, 1);
+ }
+
+ ireg = of_get_property(np, "reg", &ilen);
+ if (!ireg) {
+ pr_err("icp_native: Can't find interrupt reg property");
+ return -1;
+ }
+
+ reg_tuple_size = (of_n_addr_cells(np) + of_n_size_cells(np)) * 4;
+ if (((ilen % reg_tuple_size) != 0)
+ || (num_servers && (num_servers != (ilen / reg_tuple_size)))) {
+ pr_err("icp_native: ICP reg len (%d) != num servers (%d)",
+ ilen / reg_tuple_size, num_servers);
+ return -1;
+ }
+
+ for (i = 0; i < (ilen / reg_tuple_size); i++) {
+ struct resource r;
+ int err;
+
+ err = of_address_to_resource(np, i, &r);
+ if (err) {
+ pr_err("icp_native: Could not translate ICP MMIO"
+ " for interrupt server 0x%x (%d)\n", *indx, err);
+ return -1;
+ }
+
+ if (icp_native_map_one_cpu(*indx, r.start, r.end - r.start))
+ return -1;
+
+ (*indx)++;
+ }
+ return 0;
+}
+
+static const struct icp_ops icp_native_ops = {
+ .get_irq = icp_native_get_irq,
+ .eoi = icp_native_eoi,
+ .set_priority = icp_native_set_cpu_priority,
+ .teardown_cpu = icp_native_teardown_cpu,
+ .flush_ipi = icp_native_flush_ipi,
+#ifdef CONFIG_SMP
+ .ipi_action = icp_native_ipi_action,
+ .cause_ipi = icp_native_cause_ipi,
+#endif
+};
+
+int icp_native_init(void)
+{
+ struct device_node *np;
+ u32 indx = 0;
+ int found = 0;
+
+ for_each_compatible_node(np, NULL, "ibm,ppc-xicp")
+ if (icp_native_init_one_node(np, &indx) == 0)
+ found = 1;
+ if (!found) {
+ for_each_node_by_type(np,
+ "PowerPC-External-Interrupt-Presentation") {
+ if (icp_native_init_one_node(np, &indx) == 0)
+ found = 1;
+ }
+ }
+
+ if (found == 0)
+ return -ENODEV;
+
+ icp_ops = &icp_native_ops;
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/xics/ics-rtas.c b/arch/powerpc/sysdev/xics/ics-rtas.c
new file mode 100644
index 0000000..c782f85
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/ics-rtas.c
@@ -0,0 +1,240 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/msi.h>
+
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+#include <asm/rtas.h>
+
+/* RTAS service tokens */
+static int ibm_get_xive;
+static int ibm_set_xive;
+static int ibm_int_on;
+static int ibm_int_off;
+
+static int ics_rtas_map(struct ics *ics, unsigned int virq);
+static void ics_rtas_mask_unknown(struct ics *ics, unsigned long vec);
+static long ics_rtas_get_server(struct ics *ics, unsigned long vec);
+static int ics_rtas_host_match(struct ics *ics, struct device_node *node);
+
+/* Only one global & state struct ics */
+static struct ics ics_rtas = {
+ .map = ics_rtas_map,
+ .mask_unknown = ics_rtas_mask_unknown,
+ .get_server = ics_rtas_get_server,
+ .host_match = ics_rtas_host_match,
+};
+
+static void ics_rtas_unmask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ int call_status;
+ int server;
+
+ pr_devel("xics: unmask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ server = xics_get_irq_server(d->irq, d->affinity, 0);
+
+ call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq, server,
+ DEFAULT_PRIORITY);
+ if (call_status != 0) {
+ printk(KERN_ERR
+ "%s: ibm_set_xive irq %u server %x returned %d\n",
+ __func__, hw_irq, server, call_status);
+ return;
+ }
+
+ /* Now unmask the interrupt (often a no-op) */
+ call_status = rtas_call(ibm_int_on, 1, 1, NULL, hw_irq);
+ if (call_status != 0) {
+ printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
+ __func__, hw_irq, call_status);
+ return;
+ }
+}
+
+static unsigned int ics_rtas_startup(struct irq_data *d)
+{
+#ifdef CONFIG_PCI_MSI
+ /*
+ * The generic MSI code returns with the interrupt disabled on the
+ * card, using the MSI mask bits. Firmware doesn't appear to unmask
+ * at that level, so we do it here by hand.
+ */
+ if (d->msi_desc)
+ unmask_msi_irq(d);
+#endif
+ /* unmask it */
+ ics_rtas_unmask_irq(d);
+ return 0;
+}
+
+static void ics_rtas_mask_real_irq(unsigned int hw_irq)
+{
+ int call_status;
+
+ if (hw_irq == XICS_IPI)
+ return;
+
+ call_status = rtas_call(ibm_int_off, 1, 1, NULL, hw_irq);
+ if (call_status != 0) {
+ printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
+ __func__, hw_irq, call_status);
+ return;
+ }
+
+ /* Have to set XIVE to 0xff to be able to remove a slot */
+ call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq,
+ xics_default_server, 0xff);
+ if (call_status != 0) {
+ printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
+ __func__, hw_irq, call_status);
+ return;
+ }
+}
+
+static void ics_rtas_mask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+ pr_devel("xics: mask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+ ics_rtas_mask_real_irq(hw_irq);
+}
+
+static int ics_rtas_set_affinity(struct irq_data *d,
+ const struct cpumask *cpumask,
+ bool force)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ int status;
+ int xics_status[2];
+ int irq_server;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return -1;
+
+ status = rtas_call(ibm_get_xive, 1, 3, xics_status, hw_irq);
+
+ if (status) {
+ printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+ __func__, hw_irq, status);
+ return -1;
+ }
+
+ irq_server = xics_get_irq_server(d->irq, cpumask, 1);
+ if (irq_server == -1) {
+ char cpulist[128];
+ cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+ printk(KERN_WARNING
+ "%s: No online cpus in the mask %s for irq %d\n",
+ __func__, cpulist, d->irq);
+ return -1;
+ }
+
+ status = rtas_call(ibm_set_xive, 3, 1, NULL,
+ hw_irq, irq_server, xics_status[1]);
+
+ if (status) {
+ printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
+ __func__, hw_irq, status);
+ return -1;
+ }
+
+ return IRQ_SET_MASK_OK;
+}
+
+static struct irq_chip ics_rtas_irq_chip = {
+ .name = "XICS",
+ .irq_startup = ics_rtas_startup,
+ .irq_mask = ics_rtas_mask_irq,
+ .irq_unmask = ics_rtas_unmask_irq,
+ .irq_eoi = NULL, /* Patched at init time */
+ .irq_set_affinity = ics_rtas_set_affinity
+};
+
+static int ics_rtas_map(struct ics *ics, unsigned int virq)
+{
+ unsigned int hw_irq = (unsigned int)virq_to_hw(virq);
+ int status[2];
+ int rc;
+
+ if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS))
+ return -EINVAL;
+
+ /* Check if RTAS knows about this interrupt */
+ rc = rtas_call(ibm_get_xive, 1, 3, status, hw_irq);
+ if (rc)
+ return -ENXIO;
+
+ irq_set_chip_and_handler(virq, &ics_rtas_irq_chip, handle_fasteoi_irq);
+ irq_set_chip_data(virq, &ics_rtas);
+
+ return 0;
+}
+
+static void ics_rtas_mask_unknown(struct ics *ics, unsigned long vec)
+{
+ ics_rtas_mask_real_irq(vec);
+}
+
+static long ics_rtas_get_server(struct ics *ics, unsigned long vec)
+{
+ int rc, status[2];
+
+ rc = rtas_call(ibm_get_xive, 1, 3, status, vec);
+ if (rc)
+ return -1;
+ return status[0];
+}
+
+static int ics_rtas_host_match(struct ics *ics, struct device_node *node)
+{
+ /* IBM machines have interrupt parents of various funky types for things
+ * like vdevices, events, etc... The trick we use here is to match
+ * everything here except the legacy 8259 which is compatible "chrp,iic"
+ */
+ return !of_device_is_compatible(node, "chrp,iic");
+}
+
+int ics_rtas_init(void)
+{
+ ibm_get_xive = rtas_token("ibm,get-xive");
+ ibm_set_xive = rtas_token("ibm,set-xive");
+ ibm_int_on = rtas_token("ibm,int-on");
+ ibm_int_off = rtas_token("ibm,int-off");
+
+ /* We enable the RTAS "ICS" if RTAS is present with the
+ * appropriate tokens
+ */
+ if (ibm_get_xive == RTAS_UNKNOWN_SERVICE ||
+ ibm_set_xive == RTAS_UNKNOWN_SERVICE)
+ return -ENODEV;
+
+ /* We need to patch our irq chip's EOI to point to the
+ * right ICP
+ */
+ ics_rtas_irq_chip.irq_eoi = icp_ops->eoi;
+
+ /* Register ourselves */
+ xics_register_ics(&ics_rtas);
+
+ return 0;
+}
+
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
new file mode 100644
index 0000000..445c5a0
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright 2011 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/rtas.h>
+#include <asm/xics.h>
+#include <asm/firmware.h>
+
+/* Globals common to all ICP/ICS implementations */
+const struct icp_ops *icp_ops;
+
+unsigned int xics_default_server = 0xff;
+unsigned int xics_default_distrib_server = 0;
+unsigned int xics_interrupt_server_size = 8;
+
+DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
+
+struct irq_host *xics_host;
+
+static LIST_HEAD(ics_list);
+
+void xics_update_irq_servers(void)
+{
+ int i, j;
+ struct device_node *np;
+ u32 ilen;
+ const u32 *ireg;
+ u32 hcpuid;
+
+ /* Find the server numbers for the boot cpu. */
+ np = of_get_cpu_node(boot_cpuid, NULL);
+ BUG_ON(!np);
+
+ hcpuid = get_hard_smp_processor_id(boot_cpuid);
+ xics_default_server = xics_default_distrib_server = hcpuid;
+
+ pr_devel("xics: xics_default_server = 0x%x\n", xics_default_server);
+
+ ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
+ if (!ireg) {
+ of_node_put(np);
+ return;
+ }
+
+ i = ilen / sizeof(int);
+
+ /* Global interrupt distribution server is specified in the last
+ * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
+ * entry fom this property for current boot cpu id and use it as
+ * default distribution server
+ */
+ for (j = 0; j < i; j += 2) {
+ if (ireg[j] == hcpuid) {
+ xics_default_distrib_server = ireg[j+1];
+ break;
+ }
+ }
+ pr_devel("xics: xics_default_distrib_server = 0x%x\n",
+ xics_default_distrib_server);
+ of_node_put(np);
+}
+
+/* GIQ stuff, currently only supported on RTAS setups, will have
+ * to be sorted properly for bare metal
+ */
+void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
+{
+#ifdef CONFIG_PPC_RTAS
+ int index;
+ int status;
+
+ if (!rtas_indicator_present(GLOBAL_INTERRUPT_QUEUE, NULL))
+ return;
+
+ index = (1UL << xics_interrupt_server_size) - 1 - gserver;
+
+ status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, index, join);
+
+ WARN(status < 0, "set-indicator(%d, %d, %u) returned %d\n",
+ GLOBAL_INTERRUPT_QUEUE, index, join, status);
+#endif
+}
+
+void xics_setup_cpu(void)
+{
+ icp_ops->set_priority(LOWEST_PRIORITY);
+
+ xics_set_cpu_giq(xics_default_distrib_server, 1);
+}
+
+void xics_mask_unknown_vec(unsigned int vec)
+{
+ struct ics *ics;
+
+ pr_err("Interrupt 0x%x (real) is invalid, disabling it.\n", vec);
+
+ list_for_each_entry(ics, &ics_list, link)
+ ics->mask_unknown(ics, vec);
+}
+
+
+#ifdef CONFIG_SMP
+
+static void xics_request_ipi(void)
+{
+ unsigned int ipi;
+
+ ipi = irq_create_mapping(xics_host, XICS_IPI);
+ BUG_ON(ipi == NO_IRQ);
+
+ /*
+ * IPIs are marked IRQF_DISABLED as they must run with irqs
+ * disabled, and PERCPU. The handler was set in map.
+ */
+ BUG_ON(request_irq(ipi, icp_ops->ipi_action,
+ IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+}
+
+int __init xics_smp_probe(void)
+{
+ /* Setup cause_ipi callback based on which ICP is used */
+ smp_ops->cause_ipi = icp_ops->cause_ipi;
+
+ /* Register all the IPIs */
+ xics_request_ipi();
+
+ return cpumask_weight(cpu_possible_mask);
+}
+
+#endif /* CONFIG_SMP */
+
+void xics_teardown_cpu(void)
+{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+ /*
+ * we have to reset the cppr index to 0 because we're
+ * not going to return from the IPI
+ */
+ os_cppr->index = 0;
+ icp_ops->set_priority(0);
+ icp_ops->teardown_cpu();
+}
+
+void xics_kexec_teardown_cpu(int secondary)
+{
+ xics_teardown_cpu();
+
+ icp_ops->flush_ipi();
+
+ /*
+ * Some machines need to have at least one cpu in the GIQ,
+ * so leave the master cpu in the group.
+ */
+ if (secondary)
+ xics_set_cpu_giq(xics_default_distrib_server, 0);
+}
+
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/* Interrupts are disabled. */
+void xics_migrate_irqs_away(void)
+{
+ int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
+ unsigned int irq, virq;
+
+ /* If we used to be the default server, move to the new "boot_cpuid" */
+ if (hw_cpu == xics_default_server)
+ xics_update_irq_servers();
+
+ /* Reject any interrupt that was queued to us... */
+ icp_ops->set_priority(0);
+
+ /* Remove ourselves from the global interrupt queue */
+ xics_set_cpu_giq(xics_default_distrib_server, 0);
+
+ /* Allow IPIs again... */
+ icp_ops->set_priority(DEFAULT_PRIORITY);
+
+ for_each_irq(virq) {
+ struct irq_desc *desc;
+ struct irq_chip *chip;
+ long server;
+ unsigned long flags;
+ struct ics *ics;
+
+ /* We can't set affinity on ISA interrupts */
+ if (virq < NUM_ISA_INTERRUPTS)
+ continue;
+ if (!virq_is_host(virq, xics_host))
+ continue;
+ irq = (unsigned int)virq_to_hw(virq);
+ /* We need to get IPIs still. */
+ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ continue;
+ desc = irq_to_desc(virq);
+ /* We only need to migrate enabled IRQS */
+ if (!desc || !desc->action)
+ continue;
+ chip = irq_desc_get_chip(desc);
+ if (!chip || !chip->irq_set_affinity)
+ continue;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+
+ /* Locate interrupt server */
+ server = -1;
+ ics = irq_get_chip_data(virq);
+ if (ics)
+ server = ics->get_server(ics, irq);
+ if (server < 0) {
+ printk(KERN_ERR "%s: Can't find server for irq %d\n",
+ __func__, irq);
+ goto unlock;
+ }
+
+ /* We only support delivery to all cpus or to one cpu.
+ * The irq has to be migrated only in the single cpu
+ * case.
+ */
+ if (server != hw_cpu)
+ goto unlock;
+
+ /* This is expected during cpu offline. */
+ if (cpu_online(cpu))
+ pr_warning("IRQ %u affinity broken off cpu %u\n",
+ virq, cpu);
+
+ /* Reset affinity to all cpus */
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ irq_set_affinity(virq, cpu_all_mask);
+ continue;
+unlock:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ }
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+#ifdef CONFIG_SMP
+/*
+ * For the moment we only implement delivery to all cpus or one cpu.
+ *
+ * If the requested affinity is cpu_all_mask, we set global affinity.
+ * If not we set it to the first cpu in the mask, even if multiple cpus
+ * are set. This is so things like irqbalance (which set core and package
+ * wide affinities) do the right thing.
+ *
+ * We need to fix this to implement support for the links
+ */
+int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask,
+ unsigned int strict_check)
+{
+
+ if (!distribute_irqs)
+ return xics_default_server;
+
+ if (!cpumask_subset(cpu_possible_mask, cpumask)) {
+ int server = cpumask_first_and(cpu_online_mask, cpumask);
+
+ if (server < nr_cpu_ids)
+ return get_hard_smp_processor_id(server);
+
+ if (strict_check)
+ return -1;
+ }
+
+ /*
+ * Workaround issue with some versions of JS20 firmware that
+ * deliver interrupts to cpus which haven't been started. This
+ * happens when using the maxcpus= boot option.
+ */
+ if (cpumask_equal(cpu_online_mask, cpu_present_mask))
+ return xics_default_distrib_server;
+
+ return xics_default_server;
+}
+#endif /* CONFIG_SMP */
+
+static int xics_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct ics *ics;
+
+ list_for_each_entry(ics, &ics_list, link)
+ if (ics->host_match(ics, node))
+ return 1;
+
+ return 0;
+}
+
+/* Dummies */
+static void xics_ipi_unmask(struct irq_data *d) { }
+static void xics_ipi_mask(struct irq_data *d) { }
+
+static struct irq_chip xics_ipi_chip = {
+ .name = "XICS",
+ .irq_eoi = NULL, /* Patched at init time */
+ .irq_mask = xics_ipi_mask,
+ .irq_unmask = xics_ipi_unmask,
+};
+
+static int xics_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct ics *ics;
+
+ pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+
+ /* Insert the interrupt mapping into the radix tree for fast lookup */
+ irq_radix_revmap_insert(xics_host, virq, hw);
+
+ /* They aren't all level sensitive but we just don't really know */
+ irq_set_status_flags(virq, IRQ_LEVEL);
+
+ /* Don't call into ICS for IPIs */
+ if (hw == XICS_IPI) {
+ irq_set_chip_and_handler(virq, &xics_ipi_chip,
+ handle_percpu_irq);
+ return 0;
+ }
+
+ /* Let the ICS setup the chip data */
+ list_for_each_entry(ics, &ics_list, link)
+ if (ics->map(ics, virq) == 0)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+ /* Current xics implementation translates everything
+ * to level. It is not technically right for MSIs but this
+ * is irrelevant at this point. We might get smarter in the future
+ */
+ *out_hwirq = intspec[0];
+ *out_flags = IRQ_TYPE_LEVEL_LOW;
+
+ return 0;
+}
+
+static struct irq_host_ops xics_host_ops = {
+ .match = xics_host_match,
+ .map = xics_host_map,
+ .xlate = xics_host_xlate,
+};
+
+static void __init xics_init_host(void)
+{
+ xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
+ XICS_IRQ_SPURIOUS);
+ BUG_ON(xics_host == NULL);
+ irq_set_default_host(xics_host);
+}
+
+void __init xics_register_ics(struct ics *ics)
+{
+ list_add(&ics->link, &ics_list);
+}
+
+static void __init xics_get_server_size(void)
+{
+ struct device_node *np;
+ const u32 *isize;
+
+ /* We fetch the interrupt server size from the first ICS node
+ * we find if any
+ */
+ np = of_find_compatible_node(NULL, NULL, "ibm,ppc-xics");
+ if (!np)
+ return;
+ isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
+ if (!isize)
+ return;
+ xics_interrupt_server_size = *isize;
+ of_node_put(np);
+}
+
+void __init xics_init(void)
+{
+ int rc = -1;
+
+ /* Fist locate ICP */
+#ifdef CONFIG_PPC_ICP_HV
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ rc = icp_hv_init();
+#endif
+#ifdef CONFIG_PPC_ICP_NATIVE
+ if (rc < 0)
+ rc = icp_native_init();
+#endif
+ if (rc < 0) {
+ pr_warning("XICS: Cannot find a Presentation Controller !\n");
+ return;
+ }
+
+ /* Copy get_irq callback over to ppc_md */
+ ppc_md.get_irq = icp_ops->get_irq;
+
+ /* Patch up IPI chip EOI */
+ xics_ipi_chip.irq_eoi = icp_ops->eoi;
+
+ /* Now locate ICS */
+#ifdef CONFIG_PPC_ICS_RTAS
+ rc = ics_rtas_init();
+#endif
+ if (rc < 0)
+ pr_warning("XICS: Cannot find a Source Controller !\n");
+
+ /* Initialize common bits */
+ xics_get_server_size();
+ xics_update_irq_servers();
+ xics_init_host();
+ xics_setup_cpu();
+}
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 0a13fc1..6183799 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -71,7 +71,7 @@
*/
static void xilinx_intc_mask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void * regs = irq_data_get_irq_chip_data(d);
pr_debug("mask: %d\n", irq);
out_be32(regs + XINTC_CIE, 1 << irq);
@@ -87,7 +87,7 @@
*/
static void xilinx_intc_level_unmask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void * regs = irq_data_get_irq_chip_data(d);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
@@ -112,7 +112,7 @@
*/
static void xilinx_intc_edge_unmask(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void *regs = irq_data_get_irq_chip_data(d);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
@@ -120,7 +120,7 @@
static void xilinx_intc_edge_ack(struct irq_data *d)
{
- int irq = virq_to_hw(d->irq);
+ int irq = irqd_to_hwirq(d);
void * regs = irq_data_get_irq_chip_data(d);
pr_debug("ack: %d\n", irq);
out_be32(regs + XINTC_IAR, 1 << irq);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 33794c1..42541bb 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -334,7 +334,7 @@
int cpus_are_in_xmon(void)
{
- return !cpus_empty(cpus_in_xmon);
+ return !cpumask_empty(&cpus_in_xmon);
}
#endif
@@ -373,7 +373,7 @@
#ifdef CONFIG_SMP
cpu = smp_processor_id();
- if (cpu_isset(cpu, cpus_in_xmon)) {
+ if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
get_output_lock();
excprint(regs);
printf("cpu 0x%x: Exception %lx %s in xmon, "
@@ -396,10 +396,10 @@
}
xmon_fault_jmp[cpu] = recurse_jmp;
- cpu_set(cpu, cpus_in_xmon);
+ cpumask_set_cpu(cpu, &cpus_in_xmon);
bp = NULL;
- if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
+ if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT))
bp = at_breakpoint(regs->nip);
if (bp || unrecoverable_excp(regs))
fromipi = 0;
@@ -437,10 +437,10 @@
xmon_owner = cpu;
mb();
if (ncpus > 1) {
- smp_send_debugger_break(MSG_ALL_BUT_SELF);
+ smp_send_debugger_break();
/* wait for other cpus to come in */
for (timeout = 100000000; timeout != 0; --timeout) {
- if (cpus_weight(cpus_in_xmon) >= ncpus)
+ if (cpumask_weight(&cpus_in_xmon) >= ncpus)
break;
barrier();
}
@@ -484,7 +484,7 @@
}
}
leave:
- cpu_clear(cpu, cpus_in_xmon);
+ cpumask_clear_cpu(cpu, &cpus_in_xmon);
xmon_fault_jmp[cpu] = NULL;
#else
/* UP is simple... */
@@ -529,7 +529,7 @@
}
}
#else
- if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
+ if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
int stepped = emulate_step(regs, bp->instr[0]);
@@ -578,7 +578,7 @@
struct bpt *bp;
unsigned long offset;
- if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
+ if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
return 0;
/* Are we at the trap at bp->instr[1] for some bp? */
@@ -609,7 +609,7 @@
static int xmon_dabr_match(struct pt_regs *regs)
{
- if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
+ if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
return 0;
if (dabr.enabled == 0)
return 0;
@@ -619,7 +619,7 @@
static int xmon_iabr_match(struct pt_regs *regs)
{
- if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
+ if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
return 0;
if (iabr == NULL)
return 0;
@@ -630,7 +630,7 @@
static int xmon_ipi(struct pt_regs *regs)
{
#ifdef CONFIG_SMP
- if (in_xmon && !cpu_isset(smp_processor_id(), cpus_in_xmon))
+ if (in_xmon && !cpumask_test_cpu(smp_processor_id(), &cpus_in_xmon))
xmon_core(regs, 1);
#endif
return 0;
@@ -644,7 +644,7 @@
if (in_xmon && catch_memory_errors)
handle_fault(regs); /* doesn't return */
- if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
+ if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL) {
regs->nip = bp->address + offset;
@@ -929,7 +929,7 @@
int stepped;
/* check we are in 64-bit kernel mode, translation enabled */
- if ((regs->msr & (MSR_SF|MSR_PR|MSR_IR)) == (MSR_SF|MSR_IR)) {
+ if ((regs->msr & (MSR_64BIT|MSR_PR|MSR_IR)) == (MSR_64BIT|MSR_IR)) {
if (mread(regs->nip, &instr, 4) == 4) {
stepped = emulate_step(regs, instr);
if (stepped < 0) {
@@ -976,7 +976,7 @@
printf("cpus stopped:");
count = 0;
for (cpu = 0; cpu < NR_CPUS; ++cpu) {
- if (cpu_isset(cpu, cpus_in_xmon)) {
+ if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (count == 0)
printf(" %x", cpu);
++count;
@@ -992,7 +992,7 @@
return 0;
}
/* try to switch to cpu specified */
- if (!cpu_isset(cpu, cpus_in_xmon)) {
+ if (!cpumask_test_cpu(cpu, &cpus_in_xmon)) {
printf("cpu 0x%x isn't in xmon\n", cpu);
return 0;
}
@@ -1497,6 +1497,10 @@
#endif
printf("pc = ");
xmon_print_symbol(fp->nip, " ", "\n");
+ if (TRAP(fp) != 0xc00 && cpu_has_feature(CPU_FTR_CFAR)) {
+ printf("cfar= ");
+ xmon_print_symbol(fp->orig_gpr3, " ", "\n");
+ }
printf("lr = ");
xmon_print_symbol(fp->link, " ", "\n");
printf("msr = "REG" cr = %.8lx\n", fp->msr, fp->ccr);
@@ -2663,7 +2667,7 @@
void dump_segments(void)
{
- if (cpu_has_feature(CPU_FTR_SLB))
+ if (mmu_has_feature(MMU_FTR_SLB))
dump_slb();
else
dump_stab();
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2508a6f..4a7f140 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -88,6 +88,7 @@
select HAVE_KERNEL_XZ
select HAVE_GET_USER_PAGES_FAST
select HAVE_ARCH_MUTEX_CPU_RELAX
+ select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK
diff --git a/arch/s390/crypto/Makefile b/arch/s390/crypto/Makefile
index 1cf81d7..7f0b7cd 100644
--- a/arch/s390/crypto/Makefile
+++ b/arch/s390/crypto/Makefile
@@ -8,3 +8,4 @@
obj-$(CONFIG_CRYPTO_DES_S390) += des_s390.o
obj-$(CONFIG_CRYPTO_AES_S390) += aes_s390.o
obj-$(CONFIG_S390_PRNG) += prng.o
+obj-$(CONFIG_CRYPTO_GHASH_S390) += ghash_s390.o
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 58f4673..a9ce135 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -31,7 +31,8 @@
#define AES_KEYLEN_192 2
#define AES_KEYLEN_256 4
-static char keylen_flag = 0;
+static u8 *ctrblk;
+static char keylen_flag;
struct s390_aes_ctx {
u8 iv[AES_BLOCK_SIZE];
@@ -45,6 +46,24 @@
} fallback;
};
+struct pcc_param {
+ u8 key[32];
+ u8 tweak[16];
+ u8 block[16];
+ u8 bit[16];
+ u8 xts[16];
+};
+
+struct s390_xts_ctx {
+ u8 key[32];
+ u8 xts_param[16];
+ struct pcc_param pcc;
+ long enc;
+ long dec;
+ int key_len;
+ struct crypto_blkcipher *fallback;
+};
+
/*
* Check if the key_len is supported by the HW.
* Returns 0 if it is, a positive number if it is not and software fallback is
@@ -504,15 +523,337 @@
}
};
+static int xts_fallback_setkey(struct crypto_tfm *tfm, const u8 *key,
+ unsigned int len)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_tfm_ctx(tfm);
+ unsigned int ret;
+
+ xts_ctx->fallback->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+ xts_ctx->fallback->base.crt_flags |= (tfm->crt_flags &
+ CRYPTO_TFM_REQ_MASK);
+
+ ret = crypto_blkcipher_setkey(xts_ctx->fallback, key, len);
+ if (ret) {
+ tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
+ tfm->crt_flags |= (xts_ctx->fallback->base.crt_flags &
+ CRYPTO_TFM_RES_MASK);
+ }
+ return ret;
+}
+
+static int xts_fallback_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct crypto_blkcipher *tfm;
+ unsigned int ret;
+
+ tfm = desc->tfm;
+ desc->tfm = xts_ctx->fallback;
+
+ ret = crypto_blkcipher_decrypt_iv(desc, dst, src, nbytes);
+
+ desc->tfm = tfm;
+ return ret;
+}
+
+static int xts_fallback_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct crypto_blkcipher *tfm;
+ unsigned int ret;
+
+ tfm = desc->tfm;
+ desc->tfm = xts_ctx->fallback;
+
+ ret = crypto_blkcipher_encrypt_iv(desc, dst, src, nbytes);
+
+ desc->tfm = tfm;
+ return ret;
+}
+
+static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_tfm_ctx(tfm);
+ u32 *flags = &tfm->crt_flags;
+
+ switch (key_len) {
+ case 32:
+ xts_ctx->enc = KM_XTS_128_ENCRYPT;
+ xts_ctx->dec = KM_XTS_128_DECRYPT;
+ memcpy(xts_ctx->key + 16, in_key, 16);
+ memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16);
+ break;
+ case 48:
+ xts_ctx->enc = 0;
+ xts_ctx->dec = 0;
+ xts_fallback_setkey(tfm, in_key, key_len);
+ break;
+ case 64:
+ xts_ctx->enc = KM_XTS_256_ENCRYPT;
+ xts_ctx->dec = KM_XTS_256_DECRYPT;
+ memcpy(xts_ctx->key, in_key, 32);
+ memcpy(xts_ctx->pcc.key, in_key + 32, 32);
+ break;
+ default:
+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+ return -EINVAL;
+ }
+ xts_ctx->key_len = key_len;
+ return 0;
+}
+
+static int xts_aes_crypt(struct blkcipher_desc *desc, long func,
+ struct s390_xts_ctx *xts_ctx,
+ struct blkcipher_walk *walk)
+{
+ unsigned int offset = (xts_ctx->key_len >> 1) & 0x10;
+ int ret = blkcipher_walk_virt(desc, walk);
+ unsigned int nbytes = walk->nbytes;
+ unsigned int n;
+ u8 *in, *out;
+ void *param;
+
+ if (!nbytes)
+ goto out;
+
+ memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block));
+ memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit));
+ memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts));
+ memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak));
+ param = xts_ctx->pcc.key + offset;
+ ret = crypt_s390_pcc(func, param);
+ BUG_ON(ret < 0);
+
+ memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16);
+ param = xts_ctx->key + offset;
+ do {
+ /* only use complete blocks */
+ n = nbytes & ~(AES_BLOCK_SIZE - 1);
+ out = walk->dst.virt.addr;
+ in = walk->src.virt.addr;
+
+ ret = crypt_s390_km(func, param, out, in, n);
+ BUG_ON(ret < 0 || ret != n);
+
+ nbytes &= AES_BLOCK_SIZE - 1;
+ ret = blkcipher_walk_done(desc, walk, nbytes);
+ } while ((nbytes = walk->nbytes));
+out:
+ return ret;
+}
+
+static int xts_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ if (unlikely(xts_ctx->key_len == 48))
+ return xts_fallback_encrypt(desc, dst, src, nbytes);
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return xts_aes_crypt(desc, xts_ctx->enc, xts_ctx, &walk);
+}
+
+static int xts_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ if (unlikely(xts_ctx->key_len == 48))
+ return xts_fallback_decrypt(desc, dst, src, nbytes);
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return xts_aes_crypt(desc, xts_ctx->dec, xts_ctx, &walk);
+}
+
+static int xts_fallback_init(struct crypto_tfm *tfm)
+{
+ const char *name = tfm->__crt_alg->cra_name;
+ struct s390_xts_ctx *xts_ctx = crypto_tfm_ctx(tfm);
+
+ xts_ctx->fallback = crypto_alloc_blkcipher(name, 0,
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK);
+
+ if (IS_ERR(xts_ctx->fallback)) {
+ pr_err("Allocating XTS fallback algorithm %s failed\n",
+ name);
+ return PTR_ERR(xts_ctx->fallback);
+ }
+ return 0;
+}
+
+static void xts_fallback_exit(struct crypto_tfm *tfm)
+{
+ struct s390_xts_ctx *xts_ctx = crypto_tfm_ctx(tfm);
+
+ crypto_free_blkcipher(xts_ctx->fallback);
+ xts_ctx->fallback = NULL;
+}
+
+static struct crypto_alg xts_aes_alg = {
+ .cra_name = "xts(aes)",
+ .cra_driver_name = "xts-aes-s390",
+ .cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct s390_xts_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(xts_aes_alg.cra_list),
+ .cra_init = xts_fallback_init,
+ .cra_exit = xts_fallback_exit,
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = 2 * AES_MIN_KEY_SIZE,
+ .max_keysize = 2 * AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = xts_aes_set_key,
+ .encrypt = xts_aes_encrypt,
+ .decrypt = xts_aes_decrypt,
+ }
+ }
+};
+
+static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
+
+ switch (key_len) {
+ case 16:
+ sctx->enc = KMCTR_AES_128_ENCRYPT;
+ sctx->dec = KMCTR_AES_128_DECRYPT;
+ break;
+ case 24:
+ sctx->enc = KMCTR_AES_192_ENCRYPT;
+ sctx->dec = KMCTR_AES_192_DECRYPT;
+ break;
+ case 32:
+ sctx->enc = KMCTR_AES_256_ENCRYPT;
+ sctx->dec = KMCTR_AES_256_DECRYPT;
+ break;
+ }
+
+ return aes_set_key(tfm, in_key, key_len);
+}
+
+static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
+ struct s390_aes_ctx *sctx, struct blkcipher_walk *walk)
+{
+ int ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE);
+ unsigned int i, n, nbytes;
+ u8 buf[AES_BLOCK_SIZE];
+ u8 *out, *in;
+
+ if (!walk->nbytes)
+ return ret;
+
+ memcpy(ctrblk, walk->iv, AES_BLOCK_SIZE);
+ while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
+ out = walk->dst.virt.addr;
+ in = walk->src.virt.addr;
+ while (nbytes >= AES_BLOCK_SIZE) {
+ /* only use complete blocks, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
+ nbytes & ~(AES_BLOCK_SIZE - 1);
+ for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
+ memcpy(ctrblk + i, ctrblk + i - AES_BLOCK_SIZE,
+ AES_BLOCK_SIZE);
+ crypto_inc(ctrblk + i, AES_BLOCK_SIZE);
+ }
+ ret = crypt_s390_kmctr(func, sctx->key, out, in, n, ctrblk);
+ BUG_ON(ret < 0 || ret != n);
+ if (n > AES_BLOCK_SIZE)
+ memcpy(ctrblk, ctrblk + n - AES_BLOCK_SIZE,
+ AES_BLOCK_SIZE);
+ crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ out += n;
+ in += n;
+ nbytes -= n;
+ }
+ ret = blkcipher_walk_done(desc, walk, nbytes);
+ }
+ /*
+ * final block may be < AES_BLOCK_SIZE, copy only nbytes
+ */
+ if (nbytes) {
+ out = walk->dst.virt.addr;
+ in = walk->src.virt.addr;
+ ret = crypt_s390_kmctr(func, sctx->key, buf, in,
+ AES_BLOCK_SIZE, ctrblk);
+ BUG_ON(ret < 0 || ret != AES_BLOCK_SIZE);
+ memcpy(out, buf, nbytes);
+ crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ ret = blkcipher_walk_done(desc, walk, 0);
+ }
+ memcpy(walk->iv, ctrblk, AES_BLOCK_SIZE);
+ return ret;
+}
+
+static int ctr_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ctr_aes_crypt(desc, sctx->enc, sctx, &walk);
+}
+
+static int ctr_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ctr_aes_crypt(desc, sctx->dec, sctx, &walk);
+}
+
+static struct crypto_alg ctr_aes_alg = {
+ .cra_name = "ctr(aes)",
+ .cra_driver_name = "ctr-aes-s390",
+ .cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct s390_aes_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ctr_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = ctr_aes_set_key,
+ .encrypt = ctr_aes_encrypt,
+ .decrypt = ctr_aes_decrypt,
+ }
+ }
+};
+
static int __init aes_s390_init(void)
{
int ret;
- if (crypt_s390_func_available(KM_AES_128_ENCRYPT))
+ if (crypt_s390_func_available(KM_AES_128_ENCRYPT, CRYPT_S390_MSA))
keylen_flag |= AES_KEYLEN_128;
- if (crypt_s390_func_available(KM_AES_192_ENCRYPT))
+ if (crypt_s390_func_available(KM_AES_192_ENCRYPT, CRYPT_S390_MSA))
keylen_flag |= AES_KEYLEN_192;
- if (crypt_s390_func_available(KM_AES_256_ENCRYPT))
+ if (crypt_s390_func_available(KM_AES_256_ENCRYPT, CRYPT_S390_MSA))
keylen_flag |= AES_KEYLEN_256;
if (!keylen_flag)
@@ -535,9 +876,40 @@
if (ret)
goto cbc_aes_err;
+ if (crypt_s390_func_available(KM_XTS_128_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4) &&
+ crypt_s390_func_available(KM_XTS_256_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4)) {
+ ret = crypto_register_alg(&xts_aes_alg);
+ if (ret)
+ goto xts_aes_err;
+ }
+
+ if (crypt_s390_func_available(KMCTR_AES_128_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4) &&
+ crypt_s390_func_available(KMCTR_AES_192_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4) &&
+ crypt_s390_func_available(KMCTR_AES_256_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4)) {
+ ctrblk = (u8 *) __get_free_page(GFP_KERNEL);
+ if (!ctrblk) {
+ ret = -ENOMEM;
+ goto ctr_aes_err;
+ }
+ ret = crypto_register_alg(&ctr_aes_alg);
+ if (ret) {
+ free_page((unsigned long) ctrblk);
+ goto ctr_aes_err;
+ }
+ }
+
out:
return ret;
+ctr_aes_err:
+ crypto_unregister_alg(&xts_aes_alg);
+xts_aes_err:
+ crypto_unregister_alg(&cbc_aes_alg);
cbc_aes_err:
crypto_unregister_alg(&ecb_aes_alg);
ecb_aes_err:
@@ -548,6 +920,9 @@
static void __exit aes_s390_fini(void)
{
+ crypto_unregister_alg(&ctr_aes_alg);
+ free_page((unsigned long) ctrblk);
+ crypto_unregister_alg(&xts_aes_alg);
crypto_unregister_alg(&cbc_aes_alg);
crypto_unregister_alg(&ecb_aes_alg);
crypto_unregister_alg(&aes_alg);
diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h
index 7ee9a1b..4967677 100644
--- a/arch/s390/crypto/crypt_s390.h
+++ b/arch/s390/crypto/crypt_s390.h
@@ -24,13 +24,18 @@
#define CRYPT_S390_PRIORITY 300
#define CRYPT_S390_COMPOSITE_PRIORITY 400
+#define CRYPT_S390_MSA 0x1
+#define CRYPT_S390_MSA3 0x2
+#define CRYPT_S390_MSA4 0x4
+
/* s390 cryptographic operations */
enum crypt_s390_operations {
CRYPT_S390_KM = 0x0100,
CRYPT_S390_KMC = 0x0200,
CRYPT_S390_KIMD = 0x0300,
CRYPT_S390_KLMD = 0x0400,
- CRYPT_S390_KMAC = 0x0500
+ CRYPT_S390_KMAC = 0x0500,
+ CRYPT_S390_KMCTR = 0x0600
};
/*
@@ -51,6 +56,10 @@
KM_AES_192_DECRYPT = CRYPT_S390_KM | 0x13 | 0x80,
KM_AES_256_ENCRYPT = CRYPT_S390_KM | 0x14,
KM_AES_256_DECRYPT = CRYPT_S390_KM | 0x14 | 0x80,
+ KM_XTS_128_ENCRYPT = CRYPT_S390_KM | 0x32,
+ KM_XTS_128_DECRYPT = CRYPT_S390_KM | 0x32 | 0x80,
+ KM_XTS_256_ENCRYPT = CRYPT_S390_KM | 0x34,
+ KM_XTS_256_DECRYPT = CRYPT_S390_KM | 0x34 | 0x80,
};
/*
@@ -75,6 +84,26 @@
};
/*
+ * function codes for KMCTR (CIPHER MESSAGE WITH COUNTER)
+ * instruction
+ */
+enum crypt_s390_kmctr_func {
+ KMCTR_QUERY = CRYPT_S390_KMCTR | 0x0,
+ KMCTR_DEA_ENCRYPT = CRYPT_S390_KMCTR | 0x1,
+ KMCTR_DEA_DECRYPT = CRYPT_S390_KMCTR | 0x1 | 0x80,
+ KMCTR_TDEA_128_ENCRYPT = CRYPT_S390_KMCTR | 0x2,
+ KMCTR_TDEA_128_DECRYPT = CRYPT_S390_KMCTR | 0x2 | 0x80,
+ KMCTR_TDEA_192_ENCRYPT = CRYPT_S390_KMCTR | 0x3,
+ KMCTR_TDEA_192_DECRYPT = CRYPT_S390_KMCTR | 0x3 | 0x80,
+ KMCTR_AES_128_ENCRYPT = CRYPT_S390_KMCTR | 0x12,
+ KMCTR_AES_128_DECRYPT = CRYPT_S390_KMCTR | 0x12 | 0x80,
+ KMCTR_AES_192_ENCRYPT = CRYPT_S390_KMCTR | 0x13,
+ KMCTR_AES_192_DECRYPT = CRYPT_S390_KMCTR | 0x13 | 0x80,
+ KMCTR_AES_256_ENCRYPT = CRYPT_S390_KMCTR | 0x14,
+ KMCTR_AES_256_DECRYPT = CRYPT_S390_KMCTR | 0x14 | 0x80,
+};
+
+/*
* function codes for KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST)
* instruction
*/
@@ -83,6 +112,7 @@
KIMD_SHA_1 = CRYPT_S390_KIMD | 1,
KIMD_SHA_256 = CRYPT_S390_KIMD | 2,
KIMD_SHA_512 = CRYPT_S390_KIMD | 3,
+ KIMD_GHASH = CRYPT_S390_KIMD | 65,
};
/*
@@ -284,6 +314,45 @@
}
/**
+ * crypt_s390_kmctr:
+ * @func: the function code passed to KMCTR; see crypt_s390_kmctr_func
+ * @param: address of parameter block; see POP for details on each func
+ * @dest: address of destination memory area
+ * @src: address of source memory area
+ * @src_len: length of src operand in bytes
+ * @counter: address of counter value
+ *
+ * Executes the KMCTR (CIPHER MESSAGE WITH COUNTER) operation of the CPU.
+ *
+ * Returns -1 for failure, 0 for the query func, number of processed
+ * bytes for encryption/decryption funcs
+ */
+static inline int crypt_s390_kmctr(long func, void *param, u8 *dest,
+ const u8 *src, long src_len, u8 *counter)
+{
+ register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
+ register void *__param asm("1") = param;
+ register const u8 *__src asm("2") = src;
+ register long __src_len asm("3") = src_len;
+ register u8 *__dest asm("4") = dest;
+ register u8 *__ctr asm("6") = counter;
+ int ret = -1;
+
+ asm volatile(
+ "0: .insn rrf,0xb92d0000,%3,%1,%4,0 \n" /* KMCTR opcode */
+ "1: brc 1,0b \n" /* handle partial completion */
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ : "+d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest),
+ "+a" (__ctr)
+ : "d" (__func), "a" (__param) : "cc", "memory");
+ if (ret < 0)
+ return ret;
+ return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
+}
+
+/**
* crypt_s390_func_available:
* @func: the function code of the specific function; 0 if op in general
*
@@ -291,13 +360,17 @@
*
* Returns 1 if func available; 0 if func or op in general not available
*/
-static inline int crypt_s390_func_available(int func)
+static inline int crypt_s390_func_available(int func,
+ unsigned int facility_mask)
{
unsigned char status[16];
int ret;
- /* check if CPACF facility (bit 17) is available */
- if (!test_facility(17))
+ if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
+ return 0;
+ if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
+ return 0;
+ if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
return 0;
switch (func & CRYPT_S390_OP_MASK) {
@@ -316,6 +389,10 @@
case CRYPT_S390_KMAC:
ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
break;
+ case CRYPT_S390_KMCTR:
+ ret = crypt_s390_kmctr(KMCTR_QUERY, &status, NULL, NULL, 0,
+ NULL);
+ break;
default:
return 0;
}
@@ -326,4 +403,31 @@
return (status[func >> 3] & (0x80 >> (func & 7))) != 0;
}
+/**
+ * crypt_s390_pcc:
+ * @func: the function code passed to KM; see crypt_s390_km_func
+ * @param: address of parameter block; see POP for details on each func
+ *
+ * Executes the PCC (PERFORM CRYPTOGRAPHIC COMPUTATION) operation of the CPU.
+ *
+ * Returns -1 for failure, 0 for success.
+ */
+static inline int crypt_s390_pcc(long func, void *param)
+{
+ register long __func asm("0") = func & 0x7f; /* encrypt or decrypt */
+ register void *__param asm("1") = param;
+ int ret = -1;
+
+ asm volatile(
+ "0: .insn rre,0xb92c0000,0,0 \n" /* PCC opcode */
+ "1: brc 1,0b \n" /* handle partial completion */
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ : "+d" (ret)
+ : "d" (__func), "a" (__param) : "cc", "memory");
+ return ret;
+}
+
+
#endif /* _CRYPTO_ARCH_S390_CRYPT_S390_H */
diff --git a/arch/s390/crypto/des_check_key.c b/arch/s390/crypto/des_check_key.c
deleted file mode 100644
index 5706af2..0000000
--- a/arch/s390/crypto/des_check_key.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Cryptographic API.
- *
- * Function for checking keys for the DES and Tripple DES Encryption
- * algorithms.
- *
- * Originally released as descore by Dana L. How <how@isl.stanford.edu>.
- * Modified by Raimar Falke <rf13@inf.tu-dresden.de> for the Linux-Kernel.
- * Derived from Cryptoapi and Nettle implementations, adapted for in-place
- * scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL.
- *
- * s390 Version:
- * Copyright IBM Corp. 2003
- * Author(s): Thomas Spatzier
- * Jan Glauber (jan.glauber@de.ibm.com)
- *
- * Derived from "crypto/des.c"
- * Copyright (c) 1992 Dana L. How.
- * Copyright (c) Raimar Falke <rf13@inf.tu-dresden.de>
- * Copyright (c) Gisle Sflensminde <gisle@ii.uib.no>
- * Copyright (C) 2001 Niels Mvller.
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/crypto.h>
-#include "crypto_des.h"
-
-#define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o))
-
-static const u8 parity[] = {
- 8,1,0,8,0,8,8,0,0,8,8,0,8,0,2,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,3,
- 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
- 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
- 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
- 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
- 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
- 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
- 4,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,5,0,8,0,8,8,0,0,8,8,0,8,0,6,8,
-};
-
-/*
- * RFC2451: Weak key checks SHOULD be performed.
- */
-int
-crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags)
-{
- u32 n, w;
-
- n = parity[key[0]]; n <<= 4;
- n |= parity[key[1]]; n <<= 4;
- n |= parity[key[2]]; n <<= 4;
- n |= parity[key[3]]; n <<= 4;
- n |= parity[key[4]]; n <<= 4;
- n |= parity[key[5]]; n <<= 4;
- n |= parity[key[6]]; n <<= 4;
- n |= parity[key[7]];
- w = 0x88888888L;
-
- if ((*flags & CRYPTO_TFM_REQ_WEAK_KEY)
- && !((n - (w >> 3)) & w)) { /* 1 in 10^10 keys passes this test */
- if (n < 0x41415151) {
- if (n < 0x31312121) {
- if (n < 0x14141515) {
- /* 01 01 01 01 01 01 01 01 */
- if (n == 0x11111111) goto weak;
- /* 01 1F 01 1F 01 0E 01 0E */
- if (n == 0x13131212) goto weak;
- } else {
- /* 01 E0 01 E0 01 F1 01 F1 */
- if (n == 0x14141515) goto weak;
- /* 01 FE 01 FE 01 FE 01 FE */
- if (n == 0x16161616) goto weak;
- }
- } else {
- if (n < 0x34342525) {
- /* 1F 01 1F 01 0E 01 0E 01 */
- if (n == 0x31312121) goto weak;
- /* 1F 1F 1F 1F 0E 0E 0E 0E (?) */
- if (n == 0x33332222) goto weak;
- } else {
- /* 1F E0 1F E0 0E F1 0E F1 */
- if (n == 0x34342525) goto weak;
- /* 1F FE 1F FE 0E FE 0E FE */
- if (n == 0x36362626) goto weak;
- }
- }
- } else {
- if (n < 0x61616161) {
- if (n < 0x44445555) {
- /* E0 01 E0 01 F1 01 F1 01 */
- if (n == 0x41415151) goto weak;
- /* E0 1F E0 1F F1 0E F1 0E */
- if (n == 0x43435252) goto weak;
- } else {
- /* E0 E0 E0 E0 F1 F1 F1 F1 (?) */
- if (n == 0x44445555) goto weak;
- /* E0 FE E0 FE F1 FE F1 FE */
- if (n == 0x46465656) goto weak;
- }
- } else {
- if (n < 0x64646565) {
- /* FE 01 FE 01 FE 01 FE 01 */
- if (n == 0x61616161) goto weak;
- /* FE 1F FE 1F FE 0E FE 0E */
- if (n == 0x63636262) goto weak;
- } else {
- /* FE E0 FE E0 FE F1 FE F1 */
- if (n == 0x64646565) goto weak;
- /* FE FE FE FE FE FE FE FE */
- if (n == 0x66666666) goto weak;
- }
- }
- }
- }
- return 0;
-weak:
- *flags |= CRYPTO_TFM_RES_WEAK_KEY;
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(crypto_des_check_key);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Key Check function for DES & DES3 Cipher Algorithms");
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index cc54201..a52bfd1 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -3,7 +3,7 @@
*
* s390 implementation of the DES Cipher Algorithm.
*
- * Copyright IBM Corp. 2003,2007
+ * Copyright IBM Corp. 2003,2011
* Author(s): Thomas Spatzier
* Jan Glauber (jan.glauber@de.ibm.com)
*
@@ -22,22 +22,19 @@
#include "crypt_s390.h"
-#define DES3_192_KEY_SIZE (3 * DES_KEY_SIZE)
+#define DES3_KEY_SIZE (3 * DES_KEY_SIZE)
-struct crypt_s390_des_ctx {
- u8 iv[DES_BLOCK_SIZE];
- u8 key[DES_KEY_SIZE];
-};
+static u8 *ctrblk;
-struct crypt_s390_des3_192_ctx {
+struct s390_des_ctx {
u8 iv[DES_BLOCK_SIZE];
- u8 key[DES3_192_KEY_SIZE];
+ u8 key[DES3_KEY_SIZE];
};
static int des_setkey(struct crypto_tfm *tfm, const u8 *key,
- unsigned int keylen)
+ unsigned int key_len)
{
- struct crypt_s390_des_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
u32 *flags = &tfm->crt_flags;
u32 tmp[DES_EXPKEY_WORDS];
@@ -47,22 +44,22 @@
return -EINVAL;
}
- memcpy(dctx->key, key, keylen);
+ memcpy(ctx->key, key, key_len);
return 0;
}
static void des_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
{
- struct crypt_s390_des_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
- crypt_s390_km(KM_DEA_ENCRYPT, dctx->key, out, in, DES_BLOCK_SIZE);
+ crypt_s390_km(KM_DEA_ENCRYPT, ctx->key, out, in, DES_BLOCK_SIZE);
}
static void des_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
{
- struct crypt_s390_des_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
- crypt_s390_km(KM_DEA_DECRYPT, dctx->key, out, in, DES_BLOCK_SIZE);
+ crypt_s390_km(KM_DEA_DECRYPT, ctx->key, out, in, DES_BLOCK_SIZE);
}
static struct crypto_alg des_alg = {
@@ -71,7 +68,7 @@
.cra_priority = CRYPT_S390_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_CIPHER,
.cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypt_s390_des_ctx),
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
.cra_module = THIS_MODULE,
.cra_list = LIST_HEAD_INIT(des_alg.cra_list),
.cra_u = {
@@ -86,7 +83,7 @@
};
static int ecb_desall_crypt(struct blkcipher_desc *desc, long func,
- void *param, struct blkcipher_walk *walk)
+ u8 *key, struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes;
@@ -97,7 +94,7 @@
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_km(func, param, out, in, n);
+ ret = crypt_s390_km(func, key, out, in, n);
BUG_ON((ret < 0) || (ret != n));
nbytes &= DES_BLOCK_SIZE - 1;
@@ -108,7 +105,7 @@
}
static int cbc_desall_crypt(struct blkcipher_desc *desc, long func,
- void *param, struct blkcipher_walk *walk)
+ u8 *iv, struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
@@ -116,20 +113,20 @@
if (!nbytes)
goto out;
- memcpy(param, walk->iv, DES_BLOCK_SIZE);
+ memcpy(iv, walk->iv, DES_BLOCK_SIZE);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, param, out, in, n);
+ ret = crypt_s390_kmc(func, iv, out, in, n);
BUG_ON((ret < 0) || (ret != n));
nbytes &= DES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, param, DES_BLOCK_SIZE);
+ memcpy(walk->iv, iv, DES_BLOCK_SIZE);
out:
return ret;
@@ -139,22 +136,22 @@
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct crypt_s390_des_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return ecb_desall_crypt(desc, KM_DEA_ENCRYPT, sctx->key, &walk);
+ return ecb_desall_crypt(desc, KM_DEA_ENCRYPT, ctx->key, &walk);
}
static int ecb_des_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct crypt_s390_des_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return ecb_desall_crypt(desc, KM_DEA_DECRYPT, sctx->key, &walk);
+ return ecb_desall_crypt(desc, KM_DEA_DECRYPT, ctx->key, &walk);
}
static struct crypto_alg ecb_des_alg = {
@@ -163,7 +160,7 @@
.cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
.cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypt_s390_des_ctx),
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_list = LIST_HEAD_INIT(ecb_des_alg.cra_list),
@@ -182,22 +179,22 @@
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct crypt_s390_des_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, sctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, ctx->iv, &walk);
}
static int cbc_des_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct crypt_s390_des_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, sctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, ctx->iv, &walk);
}
static struct crypto_alg cbc_des_alg = {
@@ -206,7 +203,7 @@
.cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
.cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypt_s390_des_ctx),
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_list = LIST_HEAD_INIT(cbc_des_alg.cra_list),
@@ -235,10 +232,10 @@
* property.
*
*/
-static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key,
- unsigned int keylen)
+static int des3_setkey(struct crypto_tfm *tfm, const u8 *key,
+ unsigned int key_len)
{
- struct crypt_s390_des3_192_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
u32 *flags = &tfm->crt_flags;
if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
@@ -248,141 +245,276 @@
*flags |= CRYPTO_TFM_RES_WEAK_KEY;
return -EINVAL;
}
- memcpy(dctx->key, key, keylen);
+ memcpy(ctx->key, key, key_len);
return 0;
}
-static void des3_192_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+static void des3_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
{
- struct crypt_s390_des3_192_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
- crypt_s390_km(KM_TDEA_192_ENCRYPT, dctx->key, dst, (void*)src,
- DES_BLOCK_SIZE);
+ crypt_s390_km(KM_TDEA_192_ENCRYPT, ctx->key, dst, src, DES_BLOCK_SIZE);
}
-static void des3_192_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+static void des3_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
{
- struct crypt_s390_des3_192_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
- crypt_s390_km(KM_TDEA_192_DECRYPT, dctx->key, dst, (void*)src,
- DES_BLOCK_SIZE);
+ crypt_s390_km(KM_TDEA_192_DECRYPT, ctx->key, dst, src, DES_BLOCK_SIZE);
}
-static struct crypto_alg des3_192_alg = {
+static struct crypto_alg des3_alg = {
.cra_name = "des3_ede",
.cra_driver_name = "des3_ede-s390",
.cra_priority = CRYPT_S390_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_CIPHER,
.cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypt_s390_des3_192_ctx),
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
.cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(des3_192_alg.cra_list),
+ .cra_list = LIST_HEAD_INIT(des3_alg.cra_list),
.cra_u = {
.cipher = {
- .cia_min_keysize = DES3_192_KEY_SIZE,
- .cia_max_keysize = DES3_192_KEY_SIZE,
- .cia_setkey = des3_192_setkey,
- .cia_encrypt = des3_192_encrypt,
- .cia_decrypt = des3_192_decrypt,
+ .cia_min_keysize = DES3_KEY_SIZE,
+ .cia_max_keysize = DES3_KEY_SIZE,
+ .cia_setkey = des3_setkey,
+ .cia_encrypt = des3_encrypt,
+ .cia_decrypt = des3_decrypt,
}
}
};
-static int ecb_des3_192_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
+static int ecb_des3_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
{
- struct crypt_s390_des3_192_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return ecb_desall_crypt(desc, KM_TDEA_192_ENCRYPT, sctx->key, &walk);
+ return ecb_desall_crypt(desc, KM_TDEA_192_ENCRYPT, ctx->key, &walk);
}
-static int ecb_des3_192_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
+static int ecb_des3_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
{
- struct crypt_s390_des3_192_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return ecb_desall_crypt(desc, KM_TDEA_192_DECRYPT, sctx->key, &walk);
+ return ecb_desall_crypt(desc, KM_TDEA_192_DECRYPT, ctx->key, &walk);
}
-static struct crypto_alg ecb_des3_192_alg = {
+static struct crypto_alg ecb_des3_alg = {
.cra_name = "ecb(des3_ede)",
.cra_driver_name = "ecb-des3_ede-s390",
.cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
.cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypt_s390_des3_192_ctx),
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_list = LIST_HEAD_INIT(
- ecb_des3_192_alg.cra_list),
+ ecb_des3_alg.cra_list),
.cra_u = {
.blkcipher = {
- .min_keysize = DES3_192_KEY_SIZE,
- .max_keysize = DES3_192_KEY_SIZE,
- .setkey = des3_192_setkey,
- .encrypt = ecb_des3_192_encrypt,
- .decrypt = ecb_des3_192_decrypt,
+ .min_keysize = DES3_KEY_SIZE,
+ .max_keysize = DES3_KEY_SIZE,
+ .setkey = des3_setkey,
+ .encrypt = ecb_des3_encrypt,
+ .decrypt = ecb_des3_decrypt,
}
}
};
-static int cbc_des3_192_encrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
+static int cbc_des3_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
{
- struct crypt_s390_des3_192_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, sctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, ctx->iv, &walk);
}
-static int cbc_des3_192_decrypt(struct blkcipher_desc *desc,
- struct scatterlist *dst,
- struct scatterlist *src, unsigned int nbytes)
+static int cbc_des3_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
{
- struct crypt_s390_des3_192_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, sctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, ctx->iv, &walk);
}
-static struct crypto_alg cbc_des3_192_alg = {
+static struct crypto_alg cbc_des3_alg = {
.cra_name = "cbc(des3_ede)",
.cra_driver_name = "cbc-des3_ede-s390",
.cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
.cra_blocksize = DES_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypt_s390_des3_192_ctx),
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
.cra_list = LIST_HEAD_INIT(
- cbc_des3_192_alg.cra_list),
+ cbc_des3_alg.cra_list),
.cra_u = {
.blkcipher = {
- .min_keysize = DES3_192_KEY_SIZE,
- .max_keysize = DES3_192_KEY_SIZE,
+ .min_keysize = DES3_KEY_SIZE,
+ .max_keysize = DES3_KEY_SIZE,
.ivsize = DES_BLOCK_SIZE,
- .setkey = des3_192_setkey,
- .encrypt = cbc_des3_192_encrypt,
- .decrypt = cbc_des3_192_decrypt,
+ .setkey = des3_setkey,
+ .encrypt = cbc_des3_encrypt,
+ .decrypt = cbc_des3_decrypt,
}
}
};
-static int des_s390_init(void)
+static int ctr_desall_crypt(struct blkcipher_desc *desc, long func,
+ struct s390_des_ctx *ctx, struct blkcipher_walk *walk)
+{
+ int ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE);
+ unsigned int i, n, nbytes;
+ u8 buf[DES_BLOCK_SIZE];
+ u8 *out, *in;
+
+ memcpy(ctrblk, walk->iv, DES_BLOCK_SIZE);
+ while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
+ out = walk->dst.virt.addr;
+ in = walk->src.virt.addr;
+ while (nbytes >= DES_BLOCK_SIZE) {
+ /* align to block size, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
+ nbytes & ~(DES_BLOCK_SIZE - 1);
+ for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
+ memcpy(ctrblk + i, ctrblk + i - DES_BLOCK_SIZE,
+ DES_BLOCK_SIZE);
+ crypto_inc(ctrblk + i, DES_BLOCK_SIZE);
+ }
+ ret = crypt_s390_kmctr(func, ctx->key, out, in, n, ctrblk);
+ BUG_ON((ret < 0) || (ret != n));
+ if (n > DES_BLOCK_SIZE)
+ memcpy(ctrblk, ctrblk + n - DES_BLOCK_SIZE,
+ DES_BLOCK_SIZE);
+ crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ out += n;
+ in += n;
+ nbytes -= n;
+ }
+ ret = blkcipher_walk_done(desc, walk, nbytes);
+ }
+
+ /* final block may be < DES_BLOCK_SIZE, copy only nbytes */
+ if (nbytes) {
+ out = walk->dst.virt.addr;
+ in = walk->src.virt.addr;
+ ret = crypt_s390_kmctr(func, ctx->key, buf, in,
+ DES_BLOCK_SIZE, ctrblk);
+ BUG_ON(ret < 0 || ret != DES_BLOCK_SIZE);
+ memcpy(out, buf, nbytes);
+ crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ ret = blkcipher_walk_done(desc, walk, 0);
+ }
+ memcpy(walk->iv, ctrblk, DES_BLOCK_SIZE);
+ return ret;
+}
+
+static int ctr_des_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ctr_desall_crypt(desc, KMCTR_DEA_ENCRYPT, ctx, &walk);
+}
+
+static int ctr_des_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ctr_desall_crypt(desc, KMCTR_DEA_DECRYPT, ctx, &walk);
+}
+
+static struct crypto_alg ctr_des_alg = {
+ .cra_name = "ctr(des)",
+ .cra_driver_name = "ctr-des-s390",
+ .cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ctr_des_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = des_setkey,
+ .encrypt = ctr_des_encrypt,
+ .decrypt = ctr_des_decrypt,
+ }
+ }
+};
+
+static int ctr_des3_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ctr_desall_crypt(desc, KMCTR_TDEA_192_ENCRYPT, ctx, &walk);
+}
+
+static int ctr_des3_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ctr_desall_crypt(desc, KMCTR_TDEA_192_DECRYPT, ctx, &walk);
+}
+
+static struct crypto_alg ctr_des3_alg = {
+ .cra_name = "ctr(des3_ede)",
+ .cra_driver_name = "ctr-des3_ede-s390",
+ .cra_priority = CRYPT_S390_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct s390_des_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ctr_des3_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES3_KEY_SIZE,
+ .max_keysize = DES3_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = des3_setkey,
+ .encrypt = ctr_des3_encrypt,
+ .decrypt = ctr_des3_decrypt,
+ }
+ }
+};
+
+static int __init des_s390_init(void)
{
int ret;
- if (!crypt_s390_func_available(KM_DEA_ENCRYPT) ||
- !crypt_s390_func_available(KM_TDEA_192_ENCRYPT))
+ if (!crypt_s390_func_available(KM_DEA_ENCRYPT, CRYPT_S390_MSA) ||
+ !crypt_s390_func_available(KM_TDEA_192_ENCRYPT, CRYPT_S390_MSA))
return -EOPNOTSUPP;
ret = crypto_register_alg(&des_alg);
@@ -394,23 +526,46 @@
ret = crypto_register_alg(&cbc_des_alg);
if (ret)
goto cbc_des_err;
- ret = crypto_register_alg(&des3_192_alg);
+ ret = crypto_register_alg(&des3_alg);
if (ret)
- goto des3_192_err;
- ret = crypto_register_alg(&ecb_des3_192_alg);
+ goto des3_err;
+ ret = crypto_register_alg(&ecb_des3_alg);
if (ret)
- goto ecb_des3_192_err;
- ret = crypto_register_alg(&cbc_des3_192_alg);
+ goto ecb_des3_err;
+ ret = crypto_register_alg(&cbc_des3_alg);
if (ret)
- goto cbc_des3_192_err;
+ goto cbc_des3_err;
+
+ if (crypt_s390_func_available(KMCTR_DEA_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4) &&
+ crypt_s390_func_available(KMCTR_TDEA_192_ENCRYPT,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4)) {
+ ret = crypto_register_alg(&ctr_des_alg);
+ if (ret)
+ goto ctr_des_err;
+ ret = crypto_register_alg(&ctr_des3_alg);
+ if (ret)
+ goto ctr_des3_err;
+ ctrblk = (u8 *) __get_free_page(GFP_KERNEL);
+ if (!ctrblk) {
+ ret = -ENOMEM;
+ goto ctr_mem_err;
+ }
+ }
out:
return ret;
-cbc_des3_192_err:
- crypto_unregister_alg(&ecb_des3_192_alg);
-ecb_des3_192_err:
- crypto_unregister_alg(&des3_192_alg);
-des3_192_err:
+ctr_mem_err:
+ crypto_unregister_alg(&ctr_des3_alg);
+ctr_des3_err:
+ crypto_unregister_alg(&ctr_des_alg);
+ctr_des_err:
+ crypto_unregister_alg(&cbc_des3_alg);
+cbc_des3_err:
+ crypto_unregister_alg(&ecb_des3_alg);
+ecb_des3_err:
+ crypto_unregister_alg(&des3_alg);
+des3_err:
crypto_unregister_alg(&cbc_des_alg);
cbc_des_err:
crypto_unregister_alg(&ecb_des_alg);
@@ -422,9 +577,14 @@
static void __exit des_s390_exit(void)
{
- crypto_unregister_alg(&cbc_des3_192_alg);
- crypto_unregister_alg(&ecb_des3_192_alg);
- crypto_unregister_alg(&des3_192_alg);
+ if (ctrblk) {
+ crypto_unregister_alg(&ctr_des_alg);
+ crypto_unregister_alg(&ctr_des3_alg);
+ free_page((unsigned long) ctrblk);
+ }
+ crypto_unregister_alg(&cbc_des3_alg);
+ crypto_unregister_alg(&ecb_des3_alg);
+ crypto_unregister_alg(&des3_alg);
crypto_unregister_alg(&cbc_des_alg);
crypto_unregister_alg(&ecb_des_alg);
crypto_unregister_alg(&des_alg);
diff --git a/arch/s390/crypto/ghash_s390.c b/arch/s390/crypto/ghash_s390.c
new file mode 100644
index 0000000..b1bd170
--- /dev/null
+++ b/arch/s390/crypto/ghash_s390.c
@@ -0,0 +1,162 @@
+/*
+ * Cryptographic API.
+ *
+ * s390 implementation of the GHASH algorithm for GCM (Galois/Counter Mode).
+ *
+ * Copyright IBM Corp. 2011
+ * Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
+ */
+
+#include <crypto/internal/hash.h>
+#include <linux/module.h>
+
+#include "crypt_s390.h"
+
+#define GHASH_BLOCK_SIZE 16
+#define GHASH_DIGEST_SIZE 16
+
+struct ghash_ctx {
+ u8 icv[16];
+ u8 key[16];
+};
+
+struct ghash_desc_ctx {
+ u8 buffer[GHASH_BLOCK_SIZE];
+ u32 bytes;
+};
+
+static int ghash_init(struct shash_desc *desc)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ memset(dctx, 0, sizeof(*dctx));
+
+ return 0;
+}
+
+static int ghash_setkey(struct crypto_shash *tfm,
+ const u8 *key, unsigned int keylen)
+{
+ struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+
+ if (keylen != GHASH_BLOCK_SIZE) {
+ crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ memcpy(ctx->key, key, GHASH_BLOCK_SIZE);
+ memset(ctx->icv, 0, GHASH_BLOCK_SIZE);
+
+ return 0;
+}
+
+static int ghash_update(struct shash_desc *desc,
+ const u8 *src, unsigned int srclen)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+ unsigned int n;
+ u8 *buf = dctx->buffer;
+ int ret;
+
+ if (dctx->bytes) {
+ u8 *pos = buf + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+ n = min(srclen, dctx->bytes);
+ dctx->bytes -= n;
+ srclen -= n;
+
+ memcpy(pos, src, n);
+ src += n;
+
+ if (!dctx->bytes) {
+ ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf,
+ GHASH_BLOCK_SIZE);
+ BUG_ON(ret != GHASH_BLOCK_SIZE);
+ }
+ }
+
+ n = srclen & ~(GHASH_BLOCK_SIZE - 1);
+ if (n) {
+ ret = crypt_s390_kimd(KIMD_GHASH, ctx, src, n);
+ BUG_ON(ret != n);
+ src += n;
+ srclen -= n;
+ }
+
+ if (srclen) {
+ dctx->bytes = GHASH_BLOCK_SIZE - srclen;
+ memcpy(buf, src, srclen);
+ }
+
+ return 0;
+}
+
+static void ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
+{
+ u8 *buf = dctx->buffer;
+ int ret;
+
+ if (dctx->bytes) {
+ u8 *pos = buf + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+ memset(pos, 0, dctx->bytes);
+
+ ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, GHASH_BLOCK_SIZE);
+ BUG_ON(ret != GHASH_BLOCK_SIZE);
+ }
+
+ dctx->bytes = 0;
+}
+
+static int ghash_final(struct shash_desc *desc, u8 *dst)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+
+ ghash_flush(ctx, dctx);
+ memcpy(dst, ctx->icv, GHASH_BLOCK_SIZE);
+
+ return 0;
+}
+
+static struct shash_alg ghash_alg = {
+ .digestsize = GHASH_DIGEST_SIZE,
+ .init = ghash_init,
+ .update = ghash_update,
+ .final = ghash_final,
+ .setkey = ghash_setkey,
+ .descsize = sizeof(struct ghash_desc_ctx),
+ .base = {
+ .cra_name = "ghash",
+ .cra_driver_name = "ghash-s390",
+ .cra_priority = CRYPT_S390_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = GHASH_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ghash_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ghash_alg.base.cra_list),
+ },
+};
+
+static int __init ghash_mod_init(void)
+{
+ if (!crypt_s390_func_available(KIMD_GHASH,
+ CRYPT_S390_MSA | CRYPT_S390_MSA4))
+ return -EOPNOTSUPP;
+
+ return crypto_register_shash(&ghash_alg);
+}
+
+static void __exit ghash_mod_exit(void)
+{
+ crypto_unregister_shash(&ghash_alg);
+}
+
+module_init(ghash_mod_init);
+module_exit(ghash_mod_exit);
+
+MODULE_ALIAS("ghash");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("GHASH Message Digest Algorithm, s390 implementation");
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index 44bca3f..0808fbf 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -76,7 +76,7 @@
/* Add the entropy */
while (nbytes >= 8) {
- *((__u64 *)parm_block) ^= *((__u64 *)buf+i);
+ *((__u64 *)parm_block) ^= *((__u64 *)(buf+i));
prng_add_entropy();
i += 8;
nbytes -= 8;
@@ -166,7 +166,7 @@
int ret;
/* check if the CPU has a PRNG */
- if (!crypt_s390_func_available(KMC_PRNG))
+ if (!crypt_s390_func_available(KMC_PRNG, CRYPT_S390_MSA))
return -EOPNOTSUPP;
if (prng_chunk_size < 8)
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index f6de782..e9868c6 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -90,7 +90,7 @@
static int __init sha1_s390_init(void)
{
- if (!crypt_s390_func_available(KIMD_SHA_1))
+ if (!crypt_s390_func_available(KIMD_SHA_1, CRYPT_S390_MSA))
return -EOPNOTSUPP;
return crypto_register_shash(&alg);
}
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 61a7db3..5ed8d64 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -86,7 +86,7 @@
static int sha256_s390_init(void)
{
- if (!crypt_s390_func_available(KIMD_SHA_256))
+ if (!crypt_s390_func_available(KIMD_SHA_256, CRYPT_S390_MSA))
return -EOPNOTSUPP;
return crypto_register_shash(&alg);
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index 4bf73d0..32a8138 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -132,7 +132,7 @@
{
int ret;
- if (!crypt_s390_func_available(KIMD_SHA_512))
+ if (!crypt_s390_func_available(KIMD_SHA_512, CRYPT_S390_MSA))
return -EOPNOTSUPP;
if ((ret = crypto_register_shash(&sha512_alg)) < 0)
goto out;
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 43a5c78..3e20383 100644
--- a/arch/s390/include/asm/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
@@ -11,5 +11,6 @@
int set_memory_ro(unsigned long addr, int numpages);
int set_memory_rw(unsigned long addr, int numpages);
int set_memory_nx(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
#endif /* _S390_CACHEFLUSH_H */
diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h
index 72b2e2f..7e91c58 100644
--- a/arch/s390/include/asm/diag.h
+++ b/arch/s390/include/asm/diag.h
@@ -9,9 +9,22 @@
#define _ASM_S390_DIAG_H
/*
- * Diagnose 10: Release pages
+ * Diagnose 10: Release page range
*/
-extern void diag10(unsigned long addr);
+static inline void diag10_range(unsigned long start_pfn, unsigned long num_pfn)
+{
+ unsigned long start_addr, end_addr;
+
+ start_addr = start_pfn << PAGE_SHIFT;
+ end_addr = (start_pfn + num_pfn - 1) << PAGE_SHIFT;
+
+ asm volatile(
+ "0: diag %0,%1,0x10\n"
+ "1:\n"
+ EX_TABLE(0b, 1b)
+ EX_TABLE(1b, 1b)
+ : : "a" (start_addr), "a" (end_addr));
+}
/*
* Diagnose 14: Input spool file manipulation
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 3c29be4..b7931fa 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -11,15 +11,13 @@
#ifdef CONFIG_64BIT
#define MCOUNT_INSN_SIZE 12
-#define MCOUNT_OFFSET 8
#else
#define MCOUNT_INSN_SIZE 20
-#define MCOUNT_OFFSET 4
#endif
static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
- return addr - MCOUNT_OFFSET;
+ return addr;
}
#endif /* __ASSEMBLY__ */
diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h
new file mode 100644
index 0000000..95a6cf2
--- /dev/null
+++ b/arch/s390/include/asm/jump_label.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_S390_JUMP_LABEL_H
+#define _ASM_S390_JUMP_LABEL_H
+
+#include <linux/types.h>
+
+#define JUMP_LABEL_NOP_SIZE 6
+
+#ifdef CONFIG_64BIT
+#define ASM_PTR ".quad"
+#define ASM_ALIGN ".balign 8"
+#else
+#define ASM_PTR ".long"
+#define ASM_ALIGN ".balign 4"
+#endif
+
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+ asm goto("0: brcl 0,0\n"
+ ".pushsection __jump_table, \"aw\"\n"
+ ASM_ALIGN "\n"
+ ASM_PTR " 0b, %l[label], %0\n"
+ ".popsection\n"
+ : : "X" (key) : : label);
+ return false;
+label:
+ return true;
+}
+
+typedef unsigned long jump_label_t;
+
+struct jump_entry {
+ jump_label_t code;
+ jump_label_t target;
+ jump_label_t key;
+};
+
+#endif
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index a6f0e7c..8c277ca 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -23,7 +23,7 @@
#ifdef CONFIG_64BIT
mm->context.asce_bits |= _ASCE_TYPE_REGION3;
#endif
- if (current->mm->context.alloc_pgste) {
+ if (current->mm && current->mm->context.alloc_pgste) {
/*
* alloc_pgste indicates, that any NEW context will be created
* with extended page tables. The old context is unchanged. The
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 64230bc..5ff15da 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -23,7 +23,7 @@
obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \
processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
- vdso.o vtime.o sysinfo.o nmi.o sclp.o
+ vdso.o vtime.o sysinfo.o nmi.o sclp.o jump_label.o
obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o)
obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index c032d11..8237fc0 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -9,27 +9,6 @@
#include <asm/diag.h>
/*
- * Diagnose 10: Release pages
- */
-void diag10(unsigned long addr)
-{
- if (addr >= 0x7ff00000)
- return;
- asm volatile(
-#ifdef CONFIG_64BIT
- " sam31\n"
- " diag %0,%0,0x10\n"
- "0: sam64\n"
-#else
- " diag %0,%0,0x10\n"
- "0:\n"
-#endif
- EX_TABLE(0b, 0b)
- : : "a" (addr));
-}
-EXPORT_SYMBOL(diag10);
-
-/*
* Diagnose 14: Input spool file manipulation
*/
int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode)
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index c83726c..3d4a78f 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -672,6 +672,7 @@
{ "rp", 0x77, INSTR_S_RD },
{ "stcke", 0x78, INSTR_S_RD },
{ "sacf", 0x79, INSTR_S_RD },
+ { "spp", 0x80, INSTR_S_RD },
{ "stsi", 0x7d, INSTR_S_RD },
{ "srnm", 0x99, INSTR_S_RD },
{ "stfpc", 0x9c, INSTR_S_RD },
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 648f642..1b67fc6 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -836,7 +836,7 @@
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
basr %r14,0
l %r14,restart_addr-.(%r14)
- br %r14 # branch to start_secondary
+ basr %r14,%r14 # branch to start_secondary
restart_addr:
.long start_secondary
.align 8
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 9d3603d..9fd8645 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -841,7 +841,7 @@
mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
- jg start_secondary
+ brasl %r14,start_secondary
.align 8
restart_vtime:
.long 0x7fffffff,0xffffffff
diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c
new file mode 100644
index 0000000..44cc06b
--- /dev/null
+++ b/arch/s390/kernel/jump_label.c
@@ -0,0 +1,59 @@
+/*
+ * Jump label s390 support
+ *
+ * Copyright IBM Corp. 2011
+ * Author(s): Jan Glauber <jang@linux.vnet.ibm.com>
+ */
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/stop_machine.h>
+#include <linux/jump_label.h>
+#include <asm/ipl.h>
+
+#ifdef HAVE_JUMP_LABEL
+
+struct insn {
+ u16 opcode;
+ s32 offset;
+} __packed;
+
+struct insn_args {
+ unsigned long *target;
+ struct insn *insn;
+ ssize_t size;
+};
+
+static int __arch_jump_label_transform(void *data)
+{
+ struct insn_args *args = data;
+ int rc;
+
+ rc = probe_kernel_write(args->target, args->insn, args->size);
+ WARN_ON_ONCE(rc < 0);
+ return 0;
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+ enum jump_label_type type)
+{
+ struct insn_args args;
+ struct insn insn;
+
+ if (type == JUMP_LABEL_ENABLE) {
+ /* brcl 15,offset */
+ insn.opcode = 0xc0f4;
+ insn.offset = (entry->target - entry->code) >> 1;
+ } else {
+ /* brcl 0,0 */
+ insn.opcode = 0xc004;
+ insn.offset = 0;
+ }
+
+ args.target = (void *) entry->code;
+ args.insn = &insn;
+ args.size = JUMP_LABEL_NOP_SIZE;
+
+ stop_machine(__arch_jump_label_transform, &args, NULL);
+}
+
+#endif
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 63a97db..63c7d9f 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -165,12 +165,12 @@
kstat_cpu(smp_processor_id()).irqs[EXTINT_IPI]++;
/*
* handle bit signal external calls
- *
- * For the ec_schedule signal we have to do nothing. All the work
- * is done automatically when we return from the interrupt.
*/
bits = xchg(&S390_lowcore.ext_call_fast, 0);
+ if (test_bit(ec_schedule, &bits))
+ scheduler_ipi();
+
if (test_bit(ec_call_function, &bits))
generic_smp_call_function_interrupt();
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index c66ffd8..1f1dba9 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -91,7 +91,7 @@
} else
free_page((unsigned long) npa);
}
- diag10(addr);
+ diag10_range(addr >> PAGE_SHIFT, 1);
pa->pages[pa->index++] = addr;
(*counter)++;
spin_unlock(&cmm_lock);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 4cf85fe..ab98813 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -543,7 +543,6 @@
struct task_struct *tsk;
__u16 subcode;
- kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
/*
* Get the external interruption subcode & pfault
* initial/completion signal bit. VM stores this
@@ -553,6 +552,7 @@
subcode = ext_int_code >> 16;
if ((subcode & 0xff00) != __SUBCODE_MASK)
return;
+ kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
/*
* Get the token (= address of the task structure of the affected task).
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index 0607e4b..f05edcc 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -54,3 +54,8 @@
return 0;
}
EXPORT_SYMBOL_GPL(set_memory_nx);
+
+int set_memory_x(unsigned long addr, int numpages)
+{
+ return 0;
+}
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index 4952872..33cbd37 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -1021,20 +1021,14 @@
return rc;
}
-long hwsampler_query_min_interval(void)
+unsigned long hwsampler_query_min_interval(void)
{
- if (min_sampler_rate)
- return min_sampler_rate;
- else
- return -EINVAL;
+ return min_sampler_rate;
}
-long hwsampler_query_max_interval(void)
+unsigned long hwsampler_query_max_interval(void)
{
- if (max_sampler_rate)
- return max_sampler_rate;
- else
- return -EINVAL;
+ return max_sampler_rate;
}
unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu)
diff --git a/arch/s390/oprofile/hwsampler.h b/arch/s390/oprofile/hwsampler.h
index 8c72b59..1912f3b 100644
--- a/arch/s390/oprofile/hwsampler.h
+++ b/arch/s390/oprofile/hwsampler.h
@@ -102,8 +102,8 @@
int hwsampler_shutdown(void);
int hwsampler_allocate(unsigned long sdbt, unsigned long sdb);
int hwsampler_deallocate(void);
-long hwsampler_query_min_interval(void);
-long hwsampler_query_max_interval(void);
+unsigned long hwsampler_query_min_interval(void);
+unsigned long hwsampler_query_max_interval(void);
int hwsampler_start_all(unsigned long interval);
int hwsampler_stop_all(void);
int hwsampler_deactivate(unsigned int cpu);
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index c63d7e5..5995e9b 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -145,15 +145,11 @@
* create hwsampler files only if hwsampler_setup() succeeds.
*/
oprofile_min_interval = hwsampler_query_min_interval();
- if (oprofile_min_interval < 0) {
- oprofile_min_interval = 0;
+ if (oprofile_min_interval == 0)
return -ENODEV;
- }
oprofile_max_interval = hwsampler_query_max_interval();
- if (oprofile_max_interval < 0) {
- oprofile_max_interval = 0;
+ if (oprofile_max_interval == 0)
return -ENODEV;
- }
if (oprofile_timer_init(ops))
return -ENODEV;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 4b89da24..bc439de 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -24,7 +24,6 @@
select RTC_LIB
select GENERIC_ATOMIC64
select GENERIC_IRQ_SHOW
- select ARCH_NO_SYSDEV_OPS
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
index e71a531..77ec0e7 100644
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ b/arch/sh/configs/apsh4ad0a_defconfig
@@ -48,7 +48,6 @@
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
CONFIG_PM_RUNTIME=y
CONFIG_CPU_IDLE=y
CONFIG_NET=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index dc4a2eb..c416505 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -83,7 +83,6 @@
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
CONFIG_PM_RUNTIME=y
CONFIG_CPU_IDLE=y
CONFIG_NET=y
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 14726ee..f090799 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -20,6 +20,7 @@
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/prefetch.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
#include <cpu/sq.h>
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
index 6dcb816..22db127 100644
--- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -139,7 +139,7 @@
queue_work(pm_wq, &hwblk_work);
}
-int platform_pm_runtime_suspend(struct device *dev)
+static int default_platform_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pdev_archdata *ad = &pdev->archdata;
@@ -147,7 +147,7 @@
int hwblk = ad->hwblk_id;
int ret = 0;
- dev_dbg(dev, "platform_pm_runtime_suspend() [%d]\n", hwblk);
+ dev_dbg(dev, "%s() [%d]\n", __func__, hwblk);
/* ignore off-chip platform devices */
if (!hwblk)
@@ -183,20 +183,20 @@
mutex_unlock(&ad->mutex);
out:
- dev_dbg(dev, "platform_pm_runtime_suspend() [%d] returns %d\n",
- hwblk, ret);
+ dev_dbg(dev, "%s() [%d] returns %d\n",
+ __func__, hwblk, ret);
return ret;
}
-int platform_pm_runtime_resume(struct device *dev)
+static int default_platform_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pdev_archdata *ad = &pdev->archdata;
int hwblk = ad->hwblk_id;
int ret = 0;
- dev_dbg(dev, "platform_pm_runtime_resume() [%d]\n", hwblk);
+ dev_dbg(dev, "%s() [%d]\n", __func__, hwblk);
/* ignore off-chip platform devices */
if (!hwblk)
@@ -228,19 +228,19 @@
*/
mutex_unlock(&ad->mutex);
out:
- dev_dbg(dev, "platform_pm_runtime_resume() [%d] returns %d\n",
- hwblk, ret);
+ dev_dbg(dev, "%s() [%d] returns %d\n",
+ __func__, hwblk, ret);
return ret;
}
-int platform_pm_runtime_idle(struct device *dev)
+static int default_platform_runtime_idle(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
int hwblk = pdev->archdata.hwblk_id;
int ret = 0;
- dev_dbg(dev, "platform_pm_runtime_idle() [%d]\n", hwblk);
+ dev_dbg(dev, "%s() [%d]\n", __func__, hwblk);
/* ignore off-chip platform devices */
if (!hwblk)
@@ -252,10 +252,19 @@
/* suspend synchronously to disable clocks immediately */
ret = pm_runtime_suspend(dev);
out:
- dev_dbg(dev, "platform_pm_runtime_idle() [%d] done!\n", hwblk);
+ dev_dbg(dev, "%s() [%d] done!\n", __func__, hwblk);
return ret;
}
+static struct dev_power_domain default_power_domain = {
+ .ops = {
+ .runtime_suspend = default_platform_runtime_suspend,
+ .runtime_resume = default_platform_runtime_resume,
+ .runtime_idle = default_platform_runtime_idle,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
+
static int platform_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -276,6 +285,7 @@
hwblk_disable(hwblk_info, hwblk);
/* make sure driver re-inits itself once */
__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+ dev->pwr_domain = &default_power_domain;
break;
/* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */
case BUS_NOTIFY_BOUND_DRIVER:
@@ -289,6 +299,7 @@
__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
break;
case BUS_NOTIFY_DEL_DEVICE:
+ dev->pwr_domain = NULL;
break;
}
return 0;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 2130ca6..3d7b209 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -117,7 +117,11 @@
set_tsk_thread_flag(child, TIF_SINGLESTEP);
+ if (ptrace_get_breakpoints(child) < 0)
+ return;
+
set_single_step(child, pc);
+ ptrace_put_breakpoints(child);
}
void user_disable_single_step(struct task_struct *child)
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 509b36b..6207561 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <asm/atomic.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -323,6 +324,7 @@
generic_smp_call_function_interrupt();
break;
case SMP_MSG_RESCHEDULE:
+ scheduler_ipi();
break;
case SMP_MSG_FUNCTION_SINGLE:
generic_smp_call_function_single_interrupt();
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 3484c2f..b51a171 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -87,7 +87,6 @@
bust_spinlocks(1);
printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
- sysfs_printk_last_file();
print_modules();
show_regs(regs);
diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h
index 427d468..fc73a82 100644
--- a/arch/sparc/include/asm/jump_label.h
+++ b/arch/sparc/include/asm/jump_label.h
@@ -7,17 +7,20 @@
#define JUMP_LABEL_NOP_SIZE 4
-#define JUMP_LABEL(key, label) \
- do { \
- asm goto("1:\n\t" \
- "nop\n\t" \
- "nop\n\t" \
- ".pushsection __jump_table, \"a\"\n\t"\
- ".align 4\n\t" \
- ".word 1b, %l[" #label "], %c0\n\t" \
- ".popsection \n\t" \
- : : "i" (key) : : label);\
- } while (0)
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+ asm goto("1:\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ ".pushsection __jump_table, \"aw\"\n\t"
+ ".align 4\n\t"
+ ".word 1b, %l[l_yes], %c0\n\t"
+ ".popsection \n\t"
+ : : "i" (key) : : l_yes);
+ return false;
+l_yes:
+ return true;
+}
#endif /* __KERNEL__ */
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 1c79f32..8b9c556 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -65,6 +65,10 @@
#define smt_capable() (sparc64_multi_core)
#endif /* CONFIG_SMP */
-#define cpu_coregroup_mask(cpu) (&cpu_core_map[cpu])
+extern cpumask_t cpu_core_map[NR_CPUS];
+static inline const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+ return &cpu_core_map[cpu];
+}
#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 9d897b6..c5387ed 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -404,8 +404,9 @@
#define __NR_open_by_handle_at 333
#define __NR_clock_adjtime 334
#define __NR_syncfs 335
+#define __NR_sendmmsg 336
-#define NR_syscalls 336
+#define NR_syscalls 337
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index f679c57..1e34f29 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -165,7 +165,7 @@
return 0;
}
-static struct of_device_id __initdata apc_match[] = {
+static struct of_device_id apc_match[] = {
{
.name = APC_OBPNAME,
},
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 948068a..d1840db 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -452,8 +452,10 @@
sabre_scan_bus(pbm, &op->dev);
}
+static const struct of_device_id sabre_match[];
static int __devinit sabre_probe(struct platform_device *op)
{
+ const struct of_device_id *match;
const struct linux_prom64_registers *pr_regs;
struct device_node *dp = op->dev.of_node;
struct pci_pbm_info *pbm;
@@ -463,7 +465,8 @@
const u32 *vdma;
u64 clear_irq;
- hummingbird_p = op->dev.of_match && (op->dev.of_match->data != NULL);
+ match = of_match_device(sabre_match, &op->dev);
+ hummingbird_p = match && (match->data != NULL);
if (!hummingbird_p) {
struct device_node *cpu_dp;
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index fecfcb2..283fbc3 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -1458,11 +1458,15 @@
return err;
}
+static const struct of_device_id schizo_match[];
static int __devinit schizo_probe(struct platform_device *op)
{
- if (!op->dev.of_match)
+ const struct of_device_id *match;
+
+ match = of_match_device(schizo_match, &op->dev);
+ if (!match)
return -EINVAL;
- return __schizo_init(op, (unsigned long) op->dev.of_match->data);
+ return __schizo_init(op, (unsigned long)match->data);
}
/* The ordering of this table is very important. Some Tomatillo
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 93d7b44..6a585d3 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -69,7 +69,7 @@
return 0;
}
-static struct of_device_id __initdata pmc_match[] = {
+static struct of_device_id pmc_match[] = {
{
.name = PMC_OBPNAME,
},
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 91c10fb..442286d 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -53,6 +53,7 @@
void __cpuinit smp_store_cpu_info(int id)
{
int cpu_node;
+ int mid;
cpu_data(id).udelay_val = loops_per_jiffy;
@@ -60,10 +61,13 @@
cpu_data(id).clock_tick = prom_getintdefault(cpu_node,
"clock-frequency", 0);
cpu_data(id).prom_node = cpu_node;
- cpu_data(id).mid = cpu_get_hwmid(cpu_node);
+ mid = cpu_get_hwmid(cpu_node);
- if (cpu_data(id).mid < 0)
- panic("No MID found for CPU%d at node 0x%08d", id, cpu_node);
+ if (mid < 0) {
+ printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08d", id, cpu_node);
+ mid = 0;
+ }
+ cpu_data(id).mid = mid;
}
void __init smp_cpus_done(unsigned int max_cpus)
@@ -125,7 +129,9 @@
void smp_send_reschedule(int cpu)
{
- /* See sparc64 */
+ /*
+ * XXX missing reschedule IPI, see scheduler_ipi()
+ */
}
void smp_send_stop(void)
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 3e94a8c..9478da7 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1368,6 +1368,7 @@
void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
+ scheduler_ipi();
}
/* This is a nop because we capture all other cpus
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 47ac73c..332c83f 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/ .long sys_syncfs
+/*335*/ .long sys_syncfs, sys_sendmmsg
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 4f3170c..43887ca 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,7 +85,7 @@
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
- .word sys_syncfs
+ .word sys_syncfs, compat_sys_sendmmsg
#endif /* CONFIG_COMPAT */
@@ -162,4 +162,4 @@
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
- .word sys_syncfs
+ .word sys_syncfs, sys_sendmmsg
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 4e23639..96046a4 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -168,7 +168,7 @@
return 0;
}
-static struct of_device_id __initdata clock_match[] = {
+static struct of_device_id clock_match[] = {
{
.name = "eeprom",
},
diff --git a/arch/sparc/lib/checksum_32.S b/arch/sparc/lib/checksum_32.S
index 3632cb3..0084c33 100644
--- a/arch/sparc/lib/checksum_32.S
+++ b/arch/sparc/lib/checksum_32.S
@@ -289,10 +289,16 @@
/* Also, handle the alignment code out of band. */
cc_dword_align:
- cmp %g1, 6
- bl,a ccte
+ cmp %g1, 16
+ bge 1f
+ srl %g1, 1, %o3
+2: cmp %o3, 0
+ be,a ccte
andcc %g1, 0xf, %o3
- andcc %o0, 0x1, %g0
+ andcc %o3, %o0, %g0 ! Check %o0 only (%o1 has the same last 2 bits)
+ be,a 2b
+ srl %o3, 1, %o3
+1: andcc %o0, 0x1, %g0
bne ccslow
andcc %o0, 0x2, %g0
be 1f
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index a429310..c52224d 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -189,12 +189,8 @@
/* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */
static irqreturn_t handle_reschedule_ipi(int irq, void *token)
{
- /*
- * Nothing to do here; when we return from interrupt, the
- * rescheduling will occur there. But do bump the interrupt
- * profiler count in the meantime.
- */
__get_cpu_var(irq_stat).irq_resched_count++;
+ scheduler_ipi();
return IRQ_HANDLED;
}
diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index 106bf27..eefb107 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -173,7 +173,7 @@
break;
case 'R':
- set_tsk_need_resched(current);
+ scheduler_ipi();
break;
case 'S':
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 6ea7797..42827ca 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -5,6 +5,7 @@
#include <stdio.h>
#include <stdlib.h>
+#include <unistd.h>
#include <errno.h>
#include <signal.h>
#include <string.h>
@@ -75,6 +76,26 @@
host.release, host.version, host.machine);
}
+/*
+ * We cannot use glibc's abort(). It makes use of tgkill() which
+ * has no effect within UML's kernel threads.
+ * After that glibc would execute an invalid instruction to kill
+ * the calling process and UML crashes with SIGSEGV.
+ */
+static inline void __attribute__ ((noreturn)) uml_abort(void)
+{
+ sigset_t sig;
+
+ fflush(NULL);
+
+ if (!sigemptyset(&sig) && !sigaddset(&sig, SIGABRT))
+ sigprocmask(SIG_UNBLOCK, &sig, 0);
+
+ for (;;)
+ if (kill(getpid(), SIGABRT) < 0)
+ exit(127);
+}
+
void os_dump_core(void)
{
int pid;
@@ -116,5 +137,5 @@
while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0)
os_kill_ptraced_process(pid, 0);
- abort();
+ uml_abort();
}
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
index 2aa30a3..d4efa7d 100644
--- a/arch/unicore32/kernel/irq.c
+++ b/arch/unicore32/kernel/irq.c
@@ -23,7 +23,7 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <asm/system.h>
@@ -237,7 +237,7 @@
unsigned int iccr;
} puv3_irq_state;
-static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int puv3_irq_suspend(void)
{
struct puv3_irq_state *st = &puv3_irq_state;
@@ -265,7 +265,7 @@
return 0;
}
-static int puv3_irq_resume(struct sys_device *dev)
+static void puv3_irq_resume(void)
{
struct puv3_irq_state *st = &puv3_irq_state;
@@ -278,27 +278,20 @@
writel(st->icmr, INTC_ICMR);
}
- return 0;
}
-static struct sysdev_class puv3_irq_sysclass = {
- .name = "pkunity-irq",
+static struct syscore_ops puv3_irq_syscore_ops = {
.suspend = puv3_irq_suspend,
.resume = puv3_irq_resume,
};
-static struct sys_device puv3_irq_device = {
- .id = 0,
- .cls = &puv3_irq_sysclass,
-};
-
-static int __init puv3_irq_init_devicefs(void)
+static int __init puv3_irq_init_syscore(void)
{
- sysdev_class_register(&puv3_irq_sysclass);
- return sysdev_register(&puv3_irq_device);
+ register_syscore_ops(&puv3_irq_syscore_ops);
+ return 0;
}
-device_initcall(puv3_irq_init_devicefs);
+device_initcall(puv3_irq_init_syscore);
void __init init_IRQ(void)
{
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
index 254e36f..b9a2646 100644
--- a/arch/unicore32/kernel/traps.c
+++ b/arch/unicore32/kernel/traps.c
@@ -192,7 +192,6 @@
printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
str, err, ++die_counter);
- sysfs_printk_last_file();
/* trap and error numbers are mostly meaningless on UniCore */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 0e10323..0e9dec6 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -15,3 +15,4 @@
obj-$(CONFIG_IA32_EMULATION) += ia32/
obj-y += platform/
+obj-y += net/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cc6c53a..880fcb6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,6 +8,7 @@
config X86_32
def_bool !64BIT
+ select CLKSRC_I8253
config X86_64
def_bool 64BIT
@@ -71,7 +72,7 @@
select GENERIC_IRQ_SHOW
select IRQ_FORCED_THREADING
select USE_GENERIC_SMP_HELPERS if SMP
- select ARCH_NO_SYSDEV_OPS
+ select HAVE_BPF_JIT if (X86_64 && NET)
config INSTRUCTION_DECODER
def_bool (KPROBES || PERF_EVENTS)
@@ -112,7 +113,14 @@
def_bool y
config ZONE_DMA
- def_bool y
+ bool "DMA memory allocation support" if EXPERT
+ default y
+ help
+ DMA memory allocation support allows devices with less than 32-bit
+ addressing to allocate within the first 16MB of address space.
+ Disable if no such devices will be used.
+
+ If unsure, say Y.
config SBUS
bool
@@ -365,17 +373,6 @@
# Following is an alphabetically sorted list of 32 bit extended platforms
# Please maintain the alphabetic order if and when there are additions
-config X86_ELAN
- bool "AMD Elan"
- depends on X86_32
- depends on X86_EXTENDED_PLATFORM
- ---help---
- Select this for an AMD Elan processor.
-
- Do not use this option for K6/Athlon/Opteron processors!
-
- If unsure, choose "PC-compatible" instead.
-
config X86_INTEL_CE
bool "CE4100 TV platform"
depends on PCI
@@ -690,6 +687,7 @@
bool "AMD IOMMU support"
select SWIOTLB
select PCI_MSI
+ select PCI_IOV
depends on X86_64 && PCI && ACPI
---help---
With this option you can enable support for AMD IOMMU hardware in
@@ -1174,7 +1172,7 @@
config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
- depends on X86_64 && NUMA && PCI
+ depends on NUMA && PCI
---help---
Enable AMD NUMA node topology detection. You should say Y here if
you have a multi processor AMD system. This uses an old method to
@@ -1201,7 +1199,7 @@
config NUMA_EMU
bool "NUMA emulation"
- depends on X86_64 && NUMA
+ depends on NUMA
---help---
Enable NUMA emulation. A flat machine will be split
into virtual nodes when booted with "numa=fake=N", where N is the
@@ -1223,6 +1221,10 @@
def_bool y
depends on X86_32 && NUMA
+config HAVE_ARCH_ALLOC_REMAP
+ def_bool y
+ depends on X86_32 && NUMA
+
config ARCH_HAVE_MEMORY_PRESENT
def_bool y
depends on X86_32 && DISCONTIGMEM
@@ -1231,13 +1233,9 @@
def_bool y
depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
-config HAVE_ARCH_ALLOC_REMAP
- def_bool y
- depends on X86_32 && NUMA
-
config ARCH_FLATMEM_ENABLE
def_bool y
- depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
+ depends on X86_32 && !NUMA
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
@@ -1247,20 +1245,16 @@
def_bool y
depends on NUMA && X86_32
-config ARCH_PROC_KCORE_TEXT
- def_bool y
- depends on X86_64 && PROC_KCORE
-
-config ARCH_SPARSEMEM_DEFAULT
- def_bool y
- depends on X86_64
-
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
select SPARSEMEM_STATIC if X86_32
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool y
+ depends on X86_64
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
@@ -1269,6 +1263,10 @@
def_bool X86_64
depends on MEMORY_HOTPLUG
+config ARCH_PROC_KCORE_TEXT
+ def_bool y
+ depends on X86_64 && PROC_KCORE
+
config ILLEGAL_POINTER_VALUE
hex
default 0 if X86_32
@@ -1703,10 +1701,6 @@
def_bool y
depends on MEMORY_HOTPLUG
-config HAVE_ARCH_EARLY_PFN_TO_NID
- def_bool X86_64
- depends on NUMA
-
config USE_PERCPU_NUMA_NODE_ID
def_bool y
depends on NUMA
@@ -1848,7 +1842,7 @@
endif # APM
-source "arch/x86/kernel/cpu/cpufreq/Kconfig"
+source "drivers/cpufreq/Kconfig"
source "drivers/cpuidle/Kconfig"
@@ -2076,7 +2070,7 @@
depends on !X86_PAE
select GPIOLIB
select OF
- select OF_PROMTREE if PROC_DEVICETREE
+ select OF_PROMTREE
---help---
Add support for detecting the unique features of the OLPC
XO hardware.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index d161e93..6a7cfdf 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -1,6 +1,4 @@
# Put here option for CPU selection and depending optimization
-if !X86_ELAN
-
choice
prompt "Processor family"
default M686 if X86_32
@@ -203,6 +201,14 @@
stores for this CPU, which can increase performance of some
operations.
+config MELAN
+ bool "AMD Elan"
+ depends on X86_32
+ ---help---
+ Select this for an AMD Elan processor.
+
+ Do not use this option for K6/Athlon/Opteron processors!
+
config MGEODEGX1
bool "GeodeGX1"
depends on X86_32
@@ -292,8 +298,6 @@
This is really intended for distributors who need more
generic optimizations.
-endif
-
#
# Define implied options from the CPU selection here
config X86_INTERNODE_CACHE_SHIFT
@@ -312,7 +316,7 @@
int
default "7" if MPENTIUM4 || MPSC
default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
- default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
+ default "4" if MELAN || M486 || M386 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
config X86_XADD
@@ -358,7 +362,7 @@
config X86_ALIGNMENT_16
def_bool y
- depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+ depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
config X86_INTEL_USERCOPY
def_bool y
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index f2ee1ab..86cee7b 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -37,7 +37,7 @@
$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
# AMD Elan support
-cflags-$(CONFIG_X86_ELAN) += -march=i486
+cflags-$(CONFIG_MELAN) += -march=i486
# Geode GX1 support
cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 1a58ad8..c04f1b7 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -2,8 +2,6 @@
# Arch-specific CryptoAPI modules.
#
-obj-$(CONFIG_CRYPTO_FPU) += fpu.o
-
obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
@@ -24,6 +22,6 @@
twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o
-aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
+aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o fpu.o
ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 2577613..feee8ff 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -94,6 +94,10 @@
const u8 *in, unsigned int len, u8 *iv);
asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
const u8 *in, unsigned int len, u8 *iv);
+
+int crypto_fpu_init(void);
+void crypto_fpu_exit(void);
+
#ifdef CONFIG_X86_64
asmlinkage void aesni_ctr_enc(struct crypto_aes_ctx *ctx, u8 *out,
const u8 *in, unsigned int len, u8 *iv);
@@ -1257,6 +1261,8 @@
return -ENODEV;
}
+ if ((err = crypto_fpu_init()))
+ goto fpu_err;
if ((err = crypto_register_alg(&aesni_alg)))
goto aes_err;
if ((err = crypto_register_alg(&__aesni_alg)))
@@ -1334,6 +1340,7 @@
__aes_err:
crypto_unregister_alg(&aesni_alg);
aes_err:
+fpu_err:
return err;
}
@@ -1363,6 +1370,8 @@
crypto_unregister_alg(&blk_ecb_alg);
crypto_unregister_alg(&__aesni_alg);
crypto_unregister_alg(&aesni_alg);
+
+ crypto_fpu_exit();
}
module_init(aesni_init);
diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
index 1a8f864..98d7a18 100644
--- a/arch/x86/crypto/fpu.c
+++ b/arch/x86/crypto/fpu.c
@@ -150,18 +150,12 @@
.module = THIS_MODULE,
};
-static int __init crypto_fpu_module_init(void)
+int __init crypto_fpu_init(void)
{
return crypto_register_template(&crypto_fpu_tmpl);
}
-static void __exit crypto_fpu_module_exit(void)
+void __exit crypto_fpu_exit(void)
{
crypto_unregister_template(&crypto_fpu_tmpl);
}
-
-module_init(crypto_fpu_module_init);
-module_exit(crypto_fpu_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("FPU block cipher wrapper");
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 849a9d2..95f5826 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -848,4 +848,5 @@
.quad compat_sys_open_by_handle_at
.quad compat_sys_clock_adjtime
.quad sys_syncfs
+ .quad compat_sys_sendmmsg /* 345 */
ia32_syscall_end:
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 12e0e7d..416d865 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -183,8 +183,6 @@
#define ARCH_HAS_POWER_INIT 1
-struct bootnode;
-
#ifdef CONFIG_ACPI_NUMA
extern int acpi_numa;
extern int x86_acpi_numa_init(void);
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index a63a68b..94d420b 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -15,4 +15,13 @@
.endm
#endif
+.macro altinstruction_entry orig alt feature orig_len alt_len
+ .align 8
+ .quad \orig
+ .quad \alt
+ .word \feature
+ .byte \orig_len
+ .byte \alt_len
+.endm
+
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 13009d1..bf535f9 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -4,7 +4,6 @@
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/stringify.h>
-#include <linux/jump_label.h>
#include <asm/asm.h>
/*
@@ -191,12 +190,4 @@
extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
extern void text_poke_smp_batch(struct text_poke_param *params, int n);
-#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
-#define IDEAL_NOP_SIZE_5 5
-extern unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
-extern void arch_init_ideal_nop5(void);
-#else
-static inline void arch_init_ideal_nop5(void) {}
-#endif
-
#endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
index 916bc81..55d95eb 100644
--- a/arch/x86/include/asm/amd_iommu_proto.h
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -19,13 +19,12 @@
#ifndef _ASM_X86_AMD_IOMMU_PROTO_H
#define _ASM_X86_AMD_IOMMU_PROTO_H
-struct amd_iommu;
+#include <asm/amd_iommu_types.h>
extern int amd_iommu_init_dma_ops(void);
extern int amd_iommu_init_passthrough(void);
+extern irqreturn_t amd_iommu_int_thread(int irq, void *data);
extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
-extern void amd_iommu_flush_all_domains(void);
-extern void amd_iommu_flush_all_devices(void);
extern void amd_iommu_apply_erratum_63(u16 devid);
extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
extern int amd_iommu_init_devices(void);
@@ -44,4 +43,12 @@
(pdev->device == PCI_DEVICE_ID_RD890_IOMMU);
}
+static inline bool iommu_feature(struct amd_iommu *iommu, u64 f)
+{
+ if (!(iommu->cap & (1 << IOMMU_CAP_EFR)))
+ return false;
+
+ return !!(iommu->features & f);
+}
+
#endif /* _ASM_X86_AMD_IOMMU_PROTO_H */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index e3509fc..4c99829 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -68,12 +68,25 @@
#define MMIO_CONTROL_OFFSET 0x0018
#define MMIO_EXCL_BASE_OFFSET 0x0020
#define MMIO_EXCL_LIMIT_OFFSET 0x0028
+#define MMIO_EXT_FEATURES 0x0030
#define MMIO_CMD_HEAD_OFFSET 0x2000
#define MMIO_CMD_TAIL_OFFSET 0x2008
#define MMIO_EVT_HEAD_OFFSET 0x2010
#define MMIO_EVT_TAIL_OFFSET 0x2018
#define MMIO_STATUS_OFFSET 0x2020
+
+/* Extended Feature Bits */
+#define FEATURE_PREFETCH (1ULL<<0)
+#define FEATURE_PPR (1ULL<<1)
+#define FEATURE_X2APIC (1ULL<<2)
+#define FEATURE_NX (1ULL<<3)
+#define FEATURE_GT (1ULL<<4)
+#define FEATURE_IA (1ULL<<6)
+#define FEATURE_GA (1ULL<<7)
+#define FEATURE_HE (1ULL<<8)
+#define FEATURE_PC (1ULL<<9)
+
/* MMIO status bits */
#define MMIO_STATUS_COM_WAIT_INT_MASK 0x04
@@ -113,7 +126,9 @@
/* command specific defines */
#define CMD_COMPL_WAIT 0x01
#define CMD_INV_DEV_ENTRY 0x02
-#define CMD_INV_IOMMU_PAGES 0x03
+#define CMD_INV_IOMMU_PAGES 0x03
+#define CMD_INV_IOTLB_PAGES 0x04
+#define CMD_INV_ALL 0x08
#define CMD_COMPL_WAIT_STORE_MASK 0x01
#define CMD_COMPL_WAIT_INT_MASK 0x02
@@ -215,6 +230,8 @@
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
+#define DTE_FLAG_IOTLB 0x01
+
#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
@@ -227,6 +244,7 @@
/* IOMMU capabilities */
#define IOMMU_CAP_IOTLB 24
#define IOMMU_CAP_NPCACHE 26
+#define IOMMU_CAP_EFR 27
#define MAX_DOMAIN_ID 65536
@@ -249,6 +267,8 @@
/* global flag if IOMMUs cache non-present entries */
extern bool amd_iommu_np_cache;
+/* Only true if all IOMMUs support device IOTLBs */
+extern bool amd_iommu_iotlb_sup;
/*
* Make iterating over all IOMMUs easier
@@ -371,6 +391,9 @@
/* flags read from acpi table */
u8 acpi_flags;
+ /* Extended features */
+ u64 features;
+
/*
* Capability pointer. There could be more than one IOMMU per PCI
* device function if there are more than one AMD IOMMU capability
@@ -409,9 +432,6 @@
/* if one, we need to send a completion wait command */
bool need_sync;
- /* becomes true if a command buffer reset is running */
- bool reset_in_progress;
-
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index 3316822..67f87f2 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -11,7 +11,6 @@
extern const struct pci_device_id amd_nb_misc_ids[];
extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[];
-struct bootnode;
extern bool early_is_amd_nb(u32 value);
extern int amd_cache_northbridges(void);
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 2b7d573..a0c46f0 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -363,7 +363,12 @@
*/
int (*x86_32_early_logical_apicid)(int cpu);
- /* determine CPU -> NUMA node mapping */
+ /*
+ * Optional method called from setup_local_APIC() after logical
+ * apicid is guaranteed to be known to initialize apicid -> node
+ * mapping if NUMA initialization hasn't done so already. Don't
+ * add new users.
+ */
int (*x86_32_numa_cpu_node)(int cpu);
#endif
};
@@ -537,8 +542,6 @@
return cpuid_apic >> index_msb;
}
-extern int default_x86_32_numa_cpu_node(int cpu);
-
#endif
static inline unsigned int
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index d87988b..34595d5 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -78,6 +78,7 @@
#define APIC_DEST_LOGICAL 0x00800
#define APIC_DEST_PHYSICAL 0x00000
#define APIC_DM_FIXED 0x00000
+#define APIC_DM_FIXED_MASK 0x00700
#define APIC_DM_LOWEST 0x00100
#define APIC_DM_SMI 0x00200
#define APIC_DM_REMRD 0x00300
diff --git a/arch/x86/include/asm/bios_ebda.h b/arch/x86/include/asm/bios_ebda.h
index 3c75210..aa6a317 100644
--- a/arch/x86/include/asm/bios_ebda.h
+++ b/arch/x86/include/asm/bios_ebda.h
@@ -4,16 +4,40 @@
#include <asm/io.h>
/*
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E.
+ * Returns physical address of EBDA. Returns 0 if there is no EBDA.
*/
static inline unsigned int get_bios_ebda(void)
{
+ /*
+ * There is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
address <<= 4;
return address; /* 0 means none */
}
+/*
+ * Return the sanitized length of the EBDA in bytes, if it exists.
+ */
+static inline unsigned int get_bios_ebda_length(void)
+{
+ unsigned int address;
+ unsigned int length;
+
+ address = get_bios_ebda();
+ if (!address)
+ return 0;
+
+ /* EBDA length is byte 0 of the EBDA (stored in KiB) */
+ length = *(unsigned char *)phys_to_virt(address);
+ length <<= 10;
+
+ /* Trim the length if it extends beyond 640KiB */
+ length = min_t(unsigned int, (640 * 1024) - address, length);
+ return length;
+}
+
void reserve_ebda_region(void);
#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 91f3e087..5dc6acc 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -195,6 +195,8 @@
/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
#define X86_FEATURE_FSGSBASE (9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
+#define X86_FEATURE_SMEP (9*32+ 7) /* Supervisor Mode Execution Protection */
+#define X86_FEATURE_ERMS (9*32+ 9) /* Enhanced REP MOVSB/STOSB */
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
@@ -207,8 +209,7 @@
#define test_cpu_cap(c, bit) \
test_bit(bit, (unsigned long *)((c)->x86_capability))
-#define cpu_has(c, bit) \
- (__builtin_constant_p(bit) && \
+#define REQUIRED_MASK_BIT_SET(bit) \
( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
(((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \
(((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \
@@ -218,10 +219,16 @@
(((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \
(((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) || \
(((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) || \
- (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) ) \
- ? 1 : \
+ (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )
+
+#define cpu_has(c, bit) \
+ (__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \
test_cpu_cap(c, bit))
+#define this_cpu_has(bit) \
+ (__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \
+ x86_this_cpu_test_bit(bit, (unsigned long *)&cpu_info.x86_capability))
+
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define set_cpu_cap(c, bit) set_bit(bit, (unsigned long *)((c)->x86_capability))
diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 057099e..0bdb0c5 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -69,22 +69,18 @@
#define MAX_DMA_CHANNELS 8
-#ifdef CONFIG_X86_32
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000)
-
-#else
-
/* 16MB ISA DMA zone */
#define MAX_DMA_PFN ((16 * 1024 * 1024) >> PAGE_SHIFT)
/* 4GB broken PCI/AGP hardware bus master zone */
#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
+#ifdef CONFIG_X86_32
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000)
+#else
/* Compat define for old dma zone */
#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
-
#endif
/* 8237 DMA controllers */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 8e4a165..7093e4a 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -90,6 +90,7 @@
#endif /* CONFIG_X86_32 */
extern int add_efi_memmap;
+extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
extern void efi_memblock_x86_reserve_range(void);
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index db24c22..268c783 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -38,11 +38,10 @@
static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
/*
- * call mcount is "e8 <4 byte offset>"
- * The addr points to the 4 byte offset and the caller of this
- * function wants the pointer to e8. Simply subtract one.
+ * addr is the address of the mcount call instruction.
+ * recordmcount does the necessary offset calculation.
*/
- return addr - 1;
+ return addr;
}
#ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h
index fc1f579..65aaa91 100644
--- a/arch/x86/include/asm/i8253.h
+++ b/arch/x86/include/asm/i8253.h
@@ -6,6 +6,8 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_LATCH LATCH
+
extern raw_spinlock_t i8253_lock;
extern struct clock_event_device *global_clock_event;
diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index 574dbc2..a32b18c 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -5,20 +5,25 @@
#include <linux/types.h>
#include <asm/nops.h>
+#include <asm/asm.h>
#define JUMP_LABEL_NOP_SIZE 5
-# define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t"
+#define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t"
-# define JUMP_LABEL(key, label) \
- do { \
- asm goto("1:" \
- JUMP_LABEL_INITIAL_NOP \
- ".pushsection __jump_table, \"aw\" \n\t"\
- _ASM_PTR "1b, %l[" #label "], %c0 \n\t" \
- ".popsection \n\t" \
- : : "i" (key) : : label); \
- } while (0)
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+ asm goto("1:"
+ JUMP_LABEL_INITIAL_NOP
+ ".pushsection __jump_table, \"aw\" \n\t"
+ _ASM_ALIGN "\n\t"
+ _ASM_PTR "1b, %l[l_yes], %c0 \n\t"
+ ".popsection \n\t"
+ : : "i" (key) : : l_yes);
+ return false;
+l_yes:
+ return true;
+}
#endif /* __KERNEL__ */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index eb16e94..021979a6 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -142,8 +142,6 @@
static inline void enable_p5_mce(void) {}
#endif
-extern void (*x86_mce_decode_callback)(struct mce *m);
-
void mce_setup(struct mce *m);
void mce_log(struct mce *m);
DECLARE_PER_CPU(struct sys_device, mce_dev);
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 91df7c51..5e83a41 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -13,31 +13,11 @@
#define NODE_DATA(nid) (node_data[nid])
#include <asm/numaq.h>
-/* summit or generic arch */
-#include <asm/srat.h>
-
-extern int get_memcfg_numa_flat(void);
-/*
- * This allows any one NUMA architecture to be compiled
- * for, and still fall back to the flat function if it
- * fails.
- */
-static inline void get_memcfg_numa(void)
-{
-
- if (get_memcfg_numaq())
- return;
- if (get_memcfg_from_srat())
- return;
- get_memcfg_numa_flat();
-}
extern void resume_map_numa_kva(pgd_t *pgd);
#else /* !CONFIG_NUMA */
-#define get_memcfg_numa get_memcfg_numa_flat
-
static inline void resume_map_numa_kva(pgd_t *pgd) {}
#endif /* CONFIG_NUMA */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
index 288b96f..b3f88d7 100644
--- a/arch/x86/include/asm/mmzone_64.h
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -4,36 +4,13 @@
#ifndef _ASM_X86_MMZONE_64_H
#define _ASM_X86_MMZONE_64_H
-
#ifdef CONFIG_NUMA
#include <linux/mmdebug.h>
-
#include <asm/smp.h>
-/* Simple perfect hash to map physical addresses to node numbers */
-struct memnode {
- int shift;
- unsigned int mapsize;
- s16 *map;
- s16 embedded_map[64 - 8];
-} ____cacheline_aligned; /* total size = 128 bytes */
-extern struct memnode memnode;
-#define memnode_shift memnode.shift
-#define memnodemap memnode.map
-#define memnodemapsize memnode.mapsize
-
extern struct pglist_data *node_data[];
-static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
-{
- unsigned nid;
- VIRTUAL_BUG_ON(!memnodemap);
- nid = memnodemap[addr >> memnode_shift];
- VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
- return nid;
-}
-
#define NODE_DATA(nid) (node_data[nid])
#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 67763c5..9eae775 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -35,7 +35,7 @@
#define MODULE_PROC_FAMILY "K7 "
#elif defined CONFIG_MK8
#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_X86_ELAN
+#elif defined CONFIG_MELAN
#define MODULE_PROC_FAMILY "ELAN "
#elif defined CONFIG_MCRUSOE
#define MODULE_PROC_FAMILY "CRUSOE "
diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
index af78849..405b4032 100644
--- a/arch/x86/include/asm/nops.h
+++ b/arch/x86/include/asm/nops.h
@@ -1,7 +1,13 @@
#ifndef _ASM_X86_NOPS_H
#define _ASM_X86_NOPS_H
-/* Define nops for use with alternative() */
+/*
+ * Define nops for use with alternative() and for tracing.
+ *
+ * *_NOP5_ATOMIC must be a single instruction.
+ */
+
+#define NOP_DS_PREFIX 0x3e
/* generic versions from gas
1: nop
@@ -13,14 +19,15 @@
6: leal 0x00000000(%esi),%esi
7: leal 0x00000000(,%esi,1),%esi
*/
-#define GENERIC_NOP1 ".byte 0x90\n"
-#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
-#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
-#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
-#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
-#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
+#define GENERIC_NOP1 0x90
+#define GENERIC_NOP2 0x89,0xf6
+#define GENERIC_NOP3 0x8d,0x76,0x00
+#define GENERIC_NOP4 0x8d,0x74,0x26,0x00
+#define GENERIC_NOP5 GENERIC_NOP1,GENERIC_NOP4
+#define GENERIC_NOP6 0x8d,0xb6,0x00,0x00,0x00,0x00
+#define GENERIC_NOP7 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00
+#define GENERIC_NOP8 GENERIC_NOP1,GENERIC_NOP7
+#define GENERIC_NOP5_ATOMIC NOP_DS_PREFIX,GENERIC_NOP4
/* Opteron 64bit nops
1: nop
@@ -29,13 +36,14 @@
4: osp osp osp nop
*/
#define K8_NOP1 GENERIC_NOP1
-#define K8_NOP2 ".byte 0x66,0x90\n"
-#define K8_NOP3 ".byte 0x66,0x66,0x90\n"
-#define K8_NOP4 ".byte 0x66,0x66,0x66,0x90\n"
-#define K8_NOP5 K8_NOP3 K8_NOP2
-#define K8_NOP6 K8_NOP3 K8_NOP3
-#define K8_NOP7 K8_NOP4 K8_NOP3
-#define K8_NOP8 K8_NOP4 K8_NOP4
+#define K8_NOP2 0x66,K8_NOP1
+#define K8_NOP3 0x66,K8_NOP2
+#define K8_NOP4 0x66,K8_NOP3
+#define K8_NOP5 K8_NOP3,K8_NOP2
+#define K8_NOP6 K8_NOP3,K8_NOP3
+#define K8_NOP7 K8_NOP4,K8_NOP3
+#define K8_NOP8 K8_NOP4,K8_NOP4
+#define K8_NOP5_ATOMIC 0x66,K8_NOP4
/* K7 nops
uses eax dependencies (arbitrary choice)
@@ -47,13 +55,14 @@
7: leal 0x00000000(,%eax,1),%eax
*/
#define K7_NOP1 GENERIC_NOP1
-#define K7_NOP2 ".byte 0x8b,0xc0\n"
-#define K7_NOP3 ".byte 0x8d,0x04,0x20\n"
-#define K7_NOP4 ".byte 0x8d,0x44,0x20,0x00\n"
-#define K7_NOP5 K7_NOP4 ASM_NOP1
-#define K7_NOP6 ".byte 0x8d,0x80,0,0,0,0\n"
-#define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n"
-#define K7_NOP8 K7_NOP7 ASM_NOP1
+#define K7_NOP2 0x8b,0xc0
+#define K7_NOP3 0x8d,0x04,0x20
+#define K7_NOP4 0x8d,0x44,0x20,0x00
+#define K7_NOP5 K7_NOP4,K7_NOP1
+#define K7_NOP6 0x8d,0x80,0,0,0,0
+#define K7_NOP7 0x8D,0x04,0x05,0,0,0,0
+#define K7_NOP8 K7_NOP7,K7_NOP1
+#define K7_NOP5_ATOMIC NOP_DS_PREFIX,K7_NOP4
/* P6 nops
uses eax dependencies (Intel-recommended choice)
@@ -69,52 +78,65 @@
There is kernel code that depends on this.
*/
#define P6_NOP1 GENERIC_NOP1
-#define P6_NOP2 ".byte 0x66,0x90\n"
-#define P6_NOP3 ".byte 0x0f,0x1f,0x00\n"
-#define P6_NOP4 ".byte 0x0f,0x1f,0x40,0\n"
-#define P6_NOP5 ".byte 0x0f,0x1f,0x44,0x00,0\n"
-#define P6_NOP6 ".byte 0x66,0x0f,0x1f,0x44,0x00,0\n"
-#define P6_NOP7 ".byte 0x0f,0x1f,0x80,0,0,0,0\n"
-#define P6_NOP8 ".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
+#define P6_NOP2 0x66,0x90
+#define P6_NOP3 0x0f,0x1f,0x00
+#define P6_NOP4 0x0f,0x1f,0x40,0
+#define P6_NOP5 0x0f,0x1f,0x44,0x00,0
+#define P6_NOP6 0x66,0x0f,0x1f,0x44,0x00,0
+#define P6_NOP7 0x0f,0x1f,0x80,0,0,0,0
+#define P6_NOP8 0x0f,0x1f,0x84,0x00,0,0,0,0
+#define P6_NOP5_ATOMIC P6_NOP5
+
+#define _ASM_MK_NOP(x) ".byte " __stringify(x) "\n"
#if defined(CONFIG_MK7)
-#define ASM_NOP1 K7_NOP1
-#define ASM_NOP2 K7_NOP2
-#define ASM_NOP3 K7_NOP3
-#define ASM_NOP4 K7_NOP4
-#define ASM_NOP5 K7_NOP5
-#define ASM_NOP6 K7_NOP6
-#define ASM_NOP7 K7_NOP7
-#define ASM_NOP8 K7_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(K7_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(K7_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(K7_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(K7_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(K7_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(K7_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(K7_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(K7_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K7_NOP5_ATOMIC)
#elif defined(CONFIG_X86_P6_NOP)
-#define ASM_NOP1 P6_NOP1
-#define ASM_NOP2 P6_NOP2
-#define ASM_NOP3 P6_NOP3
-#define ASM_NOP4 P6_NOP4
-#define ASM_NOP5 P6_NOP5
-#define ASM_NOP6 P6_NOP6
-#define ASM_NOP7 P6_NOP7
-#define ASM_NOP8 P6_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(P6_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(P6_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(P6_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(P6_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(P6_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(P6_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(P6_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(P6_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(P6_NOP5_ATOMIC)
#elif defined(CONFIG_X86_64)
-#define ASM_NOP1 K8_NOP1
-#define ASM_NOP2 K8_NOP2
-#define ASM_NOP3 K8_NOP3
-#define ASM_NOP4 K8_NOP4
-#define ASM_NOP5 K8_NOP5
-#define ASM_NOP6 K8_NOP6
-#define ASM_NOP7 K8_NOP7
-#define ASM_NOP8 K8_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(K8_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(K8_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(K8_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(K8_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(K8_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(K8_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(K8_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(K8_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K8_NOP5_ATOMIC)
#else
-#define ASM_NOP1 GENERIC_NOP1
-#define ASM_NOP2 GENERIC_NOP2
-#define ASM_NOP3 GENERIC_NOP3
-#define ASM_NOP4 GENERIC_NOP4
-#define ASM_NOP5 GENERIC_NOP5
-#define ASM_NOP6 GENERIC_NOP6
-#define ASM_NOP7 GENERIC_NOP7
-#define ASM_NOP8 GENERIC_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(GENERIC_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(GENERIC_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(GENERIC_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(GENERIC_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(GENERIC_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(GENERIC_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(GENERIC_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(GENERIC_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(GENERIC_NOP5_ATOMIC)
#endif
#define ASM_NOP_MAX 8
+#define NOP_ATOMIC5 (ASM_NOP_MAX+1) /* Entry for the 5-byte atomic NOP */
+
+#ifndef __ASSEMBLY__
+extern const unsigned char * const *ideal_nops;
+extern void arch_init_ideal_nops(void);
+#endif
#endif /* _ASM_X86_NOPS_H */
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index a50fc9f..bfacd2c 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -1,12 +1,24 @@
#ifndef _ASM_X86_NUMA_H
#define _ASM_X86_NUMA_H
+#include <linux/nodemask.h>
+
#include <asm/topology.h>
#include <asm/apicdef.h>
#ifdef CONFIG_NUMA
#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
+#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
+
+/*
+ * Too small node sizes may confuse the VM badly. Usually they
+ * result from BIOS bugs. So dont recognize nodes as standalone
+ * NUMA entities that have less than this amount of RAM listed:
+ */
+#define NODE_MIN_SIZE (4*1024*1024)
+
+extern int numa_off;
/*
* __apicid_to_node[] stores the raw mapping between physical apicid and
@@ -17,15 +29,27 @@
* numa_cpu_node().
*/
extern s16 __apicid_to_node[MAX_LOCAL_APIC];
+extern nodemask_t numa_nodes_parsed __initdata;
+
+extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
+extern void __init numa_set_distance(int from, int to, int distance);
static inline void set_apicid_to_node(int apicid, s16 node)
{
__apicid_to_node[apicid] = node;
}
+
+extern int __cpuinit numa_cpu_node(int cpu);
+
#else /* CONFIG_NUMA */
static inline void set_apicid_to_node(int apicid, s16 node)
{
}
+
+static inline int numa_cpu_node(int cpu)
+{
+ return NUMA_NO_NODE;
+}
#endif /* CONFIG_NUMA */
#ifdef CONFIG_X86_32
@@ -37,14 +61,12 @@
#ifdef CONFIG_NUMA
extern void __cpuinit numa_set_node(int cpu, int node);
extern void __cpuinit numa_clear_node(int cpu);
-extern void __init numa_init_array(void);
extern void __init init_cpu_to_node(void);
extern void __cpuinit numa_add_cpu(int cpu);
extern void __cpuinit numa_remove_cpu(int cpu);
#else /* CONFIG_NUMA */
static inline void numa_set_node(int cpu, int node) { }
static inline void numa_clear_node(int cpu) { }
-static inline void numa_init_array(void) { }
static inline void init_cpu_to_node(void) { }
static inline void numa_add_cpu(int cpu) { }
static inline void numa_remove_cpu(int cpu) { }
@@ -54,4 +76,10 @@
void debug_cpumask_set_cpu(int cpu, int node, bool enable);
#endif
+#ifdef CONFIG_NUMA_EMU
+#define FAKE_NODE_MIN_SIZE ((u64)32 << 20)
+#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
+void numa_emu_cmdline(char *);
+#endif /* CONFIG_NUMA_EMU */
+
#endif /* _ASM_X86_NUMA_H */
diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
index c6beed1e..e7d6b82 100644
--- a/arch/x86/include/asm/numa_32.h
+++ b/arch/x86/include/asm/numa_32.h
@@ -1,16 +1,6 @@
#ifndef _ASM_X86_NUMA_32_H
#define _ASM_X86_NUMA_32_H
-extern int numa_off;
-
-extern int pxm_to_nid(int pxm);
-
-#ifdef CONFIG_NUMA
-extern int __cpuinit numa_cpu_node(int cpu);
-#else /* CONFIG_NUMA */
-static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; }
-#endif /* CONFIG_NUMA */
-
#ifdef CONFIG_HIGHMEM
extern void set_highmem_pages_init(void);
#else
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
index 344eb17..0c05f7a 100644
--- a/arch/x86/include/asm/numa_64.h
+++ b/arch/x86/include/asm/numa_64.h
@@ -1,42 +1,6 @@
#ifndef _ASM_X86_NUMA_64_H
#define _ASM_X86_NUMA_64_H
-#include <linux/nodemask.h>
-
-struct bootnode {
- u64 start;
- u64 end;
-};
-
-#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
-
-extern int numa_off;
-
extern unsigned long numa_free_all_bootmem(void);
-extern void setup_node_bootmem(int nodeid, unsigned long start,
- unsigned long end);
-
-#ifdef CONFIG_NUMA
-/*
- * Too small node sizes may confuse the VM badly. Usually they
- * result from BIOS bugs. So dont recognize nodes as standalone
- * NUMA entities that have less than this amount of RAM listed:
- */
-#define NODE_MIN_SIZE (4*1024*1024)
-
-extern nodemask_t numa_nodes_parsed __initdata;
-
-extern int __cpuinit numa_cpu_node(int cpu);
-extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-extern void __init numa_set_distance(int from, int to, int distance);
-
-#ifdef CONFIG_NUMA_EMU
-#define FAKE_NODE_MIN_SIZE ((u64)32 << 20)
-#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
-void numa_emu_cmdline(char *);
-#endif /* CONFIG_NUMA_EMU */
-#else
-static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; }
-#endif
#endif /* _ASM_X86_NUMA_64_H */
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
index 37c5165..c3b3c32 100644
--- a/arch/x86/include/asm/numaq.h
+++ b/arch/x86/include/asm/numaq.h
@@ -29,7 +29,7 @@
#ifdef CONFIG_X86_NUMAQ
extern int found_numaq;
-extern int get_memcfg_numaq(void);
+extern int numaq_numa_init(void);
extern int pci_numaq_init(void);
extern void *xquad_portio;
@@ -166,11 +166,6 @@
void numaq_tsc_disable(void);
-#else
-static inline int get_memcfg_numaq(void)
-{
- return 0;
-}
#endif /* CONFIG_X86_NUMAQ */
#endif /* _ASM_X86_NUMAQ_H */
diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h
index c5d3a5a..2448771 100644
--- a/arch/x86/include/asm/olpc_ofw.h
+++ b/arch/x86/include/asm/olpc_ofw.h
@@ -26,15 +26,12 @@
/* check if OFW was detected during boot */
extern bool olpc_ofw_present(void);
+extern void olpc_dt_build_devicetree(void);
+
#else /* !CONFIG_OLPC */
static inline void olpc_ofw_detect(void) { }
static inline void setup_olpc_ofw_pgd(void) { }
-#endif /* !CONFIG_OLPC */
-
-#ifdef CONFIG_OF_PROMTREE
-extern void olpc_dt_build_devicetree(void);
-#else
static inline void olpc_dt_build_devicetree(void) { }
-#endif
+#endif /* !CONFIG_OLPC */
#endif /* _ASM_X86_OLPC_OFW_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index d475b43..53278b0 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -517,7 +517,7 @@
typeof(o2) __o2 = o2; \
typeof(o2) __n2 = n2; \
typeof(o2) __dummy; \
- alternative_io("call this_cpu_cmpxchg16b_emu\n\t" P6_NOP4, \
+ alternative_io("call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP4, \
"cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \
X86_FEATURE_CX16, \
ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \
@@ -542,6 +542,33 @@
old__; \
})
+static __always_inline int x86_this_cpu_constant_test_bit(unsigned int nr,
+ const unsigned long __percpu *addr)
+{
+ unsigned long __percpu *a = (unsigned long *)addr + nr / BITS_PER_LONG;
+
+ return ((1UL << (nr % BITS_PER_LONG)) & percpu_read(*a)) != 0;
+}
+
+static inline int x86_this_cpu_variable_test_bit(int nr,
+ const unsigned long __percpu *addr)
+{
+ int oldbit;
+
+ asm volatile("bt "__percpu_arg(2)",%1\n\t"
+ "sbb %0,%0"
+ : "=r" (oldbit)
+ : "m" (*(unsigned long *)addr), "Ir" (nr));
+
+ return oldbit;
+}
+
+#define x86_this_cpu_test_bit(nr, addr) \
+ (__builtin_constant_p((nr)) \
+ ? x86_this_cpu_constant_test_bit((nr), (addr)) \
+ : x86_this_cpu_variable_test_bit((nr), (addr)))
+
+
#include <asm-generic/percpu.h>
/* We can use this directly for local CPU (faster). */
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7db7723..d56187c 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -299,6 +299,7 @@
/* Install a pte for a particular vaddr in kernel space. */
void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+extern void native_pagetable_reserve(u64 start, u64 end);
#ifdef CONFIG_X86_32
extern void native_pagetable_setup_start(pgd_t *base);
extern void native_pagetable_setup_done(pgd_t *base);
diff --git a/arch/x86/include/asm/probe_roms.h b/arch/x86/include/asm/probe_roms.h
new file mode 100644
index 0000000..4950a0b
--- /dev/null
+++ b/arch/x86/include/asm/probe_roms.h
@@ -0,0 +1,8 @@
+#ifndef _PROBE_ROMS_H_
+#define _PROBE_ROMS_H_
+struct pci_dev;
+
+extern void __iomem *pci_map_biosrom(struct pci_dev *pdev);
+extern void pci_unmap_biosrom(void __iomem *rom);
+extern size_t pci_biosrom_size(struct pci_dev *pdev);
+#endif
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index a898a2b..59ab4df 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -60,6 +60,7 @@
#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */
#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+#define X86_CR4_SMEP 0x00100000 /* enable SMEP support */
/*
* x86-64 Task Priority Register, CR8
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index db8aa19..9756551 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -88,7 +88,7 @@
* executable.)
*/
#define RESERVE_BRK(name,sz) \
- static void __section(.discard.text) __used \
+ static void __section(.discard.text) __used notrace \
__brk_reservation_fn_##name##__(void) { \
asm volatile ( \
".pushsection .brk_reservation,\"aw\",@nobits;" \
@@ -104,10 +104,10 @@
type *name; \
RESERVE_BRK(name, sizeof(type) * entries)
+extern void probe_roms(void);
#ifdef __i386__
void __init i386_start_kernel(void);
-extern void probe_roms(void);
#else
void __init x86_64_start_kernel(char *real_mode);
diff --git a/arch/x86/include/asm/srat.h b/arch/x86/include/asm/srat.h
deleted file mode 100644
index b508d63..0000000
--- a/arch/x86/include/asm/srat.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Some of the code in this file has been gleaned from the 64 bit
- * discontigmem support code base.
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to Pat Gaughen <gone@us.ibm.com>
- */
-
-#ifndef _ASM_X86_SRAT_H
-#define _ASM_X86_SRAT_H
-
-#ifdef CONFIG_ACPI_NUMA
-extern int get_memcfg_from_srat(void);
-#else
-static inline int get_memcfg_from_srat(void)
-{
- return 0;
-}
-#endif
-
-#endif /* _ASM_X86_SRAT_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index d7e89c8..70bbe39 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -37,9 +37,6 @@
/* Generic stack tracer with callbacks */
struct stacktrace_ops {
- void (*warning)(void *data, char *msg);
- /* msg must contain %s for the symbol */
- void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
void (*address)(void *data, unsigned long address, int reliable);
/* On negative return stop dumping */
int (*stack)(void *data, char *name);
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 12569e6..c2ff2a1 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -303,24 +303,81 @@
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
-#define read_cr0() (native_read_cr0())
-#define write_cr0(x) (native_write_cr0(x))
-#define read_cr2() (native_read_cr2())
-#define write_cr2(x) (native_write_cr2(x))
-#define read_cr3() (native_read_cr3())
-#define write_cr3(x) (native_write_cr3(x))
-#define read_cr4() (native_read_cr4())
-#define read_cr4_safe() (native_read_cr4_safe())
-#define write_cr4(x) (native_write_cr4(x))
-#define wbinvd() (native_wbinvd())
+
+static inline unsigned long read_cr0(void)
+{
+ return native_read_cr0();
+}
+
+static inline void write_cr0(unsigned long x)
+{
+ native_write_cr0(x);
+}
+
+static inline unsigned long read_cr2(void)
+{
+ return native_read_cr2();
+}
+
+static inline void write_cr2(unsigned long x)
+{
+ native_write_cr2(x);
+}
+
+static inline unsigned long read_cr3(void)
+{
+ return native_read_cr3();
+}
+
+static inline void write_cr3(unsigned long x)
+{
+ native_write_cr3(x);
+}
+
+static inline unsigned long read_cr4(void)
+{
+ return native_read_cr4();
+}
+
+static inline unsigned long read_cr4_safe(void)
+{
+ return native_read_cr4_safe();
+}
+
+static inline void write_cr4(unsigned long x)
+{
+ native_write_cr4(x);
+}
+
+static inline void wbinvd(void)
+{
+ native_wbinvd();
+}
+
#ifdef CONFIG_X86_64
-#define read_cr8() (native_read_cr8())
-#define write_cr8(x) (native_write_cr8(x))
-#define load_gs_index native_load_gs_index
+
+static inline unsigned long read_cr8(void)
+{
+ return native_read_cr8();
+}
+
+static inline void write_cr8(unsigned long x)
+{
+ native_write_cr8(x);
+}
+
+static inline void load_gs_index(unsigned selector)
+{
+ native_load_gs_index(selector);
+}
+
#endif
/* Clear the 'TS' bit */
-#define clts() (native_clts())
+static inline void clts(void)
+{
+ native_clts();
+}
#endif/* CONFIG_PARAVIRT */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 910a708..c006924 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -93,19 +93,11 @@
#define pcibus_to_node(bus) __pcibus_to_node(bus)
#ifdef CONFIG_X86_32
-extern unsigned long node_start_pfn[];
-extern unsigned long node_end_pfn[];
-extern unsigned long node_remap_size[];
-#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
-
# define SD_CACHE_NICE_TRIES 1
# define SD_IDLE_IDX 1
-
#else
-
# define SD_CACHE_NICE_TRIES 2
# define SD_IDLE_IDX 2
-
#endif
/* sched_domains SD_NODE_INIT for NUMA machines */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index abd3e0e..99ddd14 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -6,7 +6,6 @@
#include <linux/errno.h>
#include <linux/compiler.h>
#include <linux/thread_info.h>
-#include <linux/prefetch.h>
#include <linux/string.h>
#include <asm/asm.h>
#include <asm/page.h>
@@ -42,7 +41,7 @@
* Returns 0 if the range is valid, nonzero otherwise.
*
* This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ * (u33)addr + (u33)size > (u33)current->addr_limit.seg (u65 for x86_64)
*
* This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
*/
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 088d09f..566e803 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -6,7 +6,6 @@
*/
#include <linux/errno.h>
#include <linux/thread_info.h>
-#include <linux/prefetch.h>
#include <linux/string.h>
#include <asm/asm.h>
#include <asm/page.h>
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 316708d..1c66d30 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -6,7 +6,6 @@
*/
#include <linux/compiler.h>
#include <linux/errno.h>
-#include <linux/prefetch.h>
#include <linux/lockdep.h>
#include <asm/alternative.h>
#include <asm/cpufeature.h>
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index a755ef5..fb6a625 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -350,10 +350,11 @@
#define __NR_open_by_handle_at 342
#define __NR_clock_adjtime 343
#define __NR_syncfs 344
+#define __NR_sendmmsg 345
#ifdef __KERNEL__
-#define NR_syscalls 345
+#define NR_syscalls 346
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 160fa76..79f90eb 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -677,6 +677,8 @@
__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
#define __NR_syncfs 306
__SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_sendmmsg 307
+__SYSCALL(__NR_sendmmsg, sys_sendmmsg)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 3e094af..130f1ee 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -94,6 +94,8 @@
/* after this # consecutive successes, bump up the throttle if it was lowered */
#define COMPLETE_THRESHOLD 5
+#define UV_LB_SUBNODEID 0x10
+
/*
* number of entries in the destination side payload queue
*/
@@ -124,7 +126,7 @@
* The distribution specification (32 bytes) is interpreted as a 256-bit
* distribution vector. Adjacent bits correspond to consecutive even numbered
* nodeIDs. The result of adding the index of a given bit to the 15-bit
- * 'base_dest_nodeid' field of the header corresponds to the
+ * 'base_dest_nasid' field of the header corresponds to the
* destination nodeID associated with that specified bit.
*/
struct bau_target_uvhubmask {
@@ -176,7 +178,7 @@
struct bau_msg_header {
unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
- unsigned int base_dest_nodeid:15; /* nasid of the */
+ unsigned int base_dest_nasid:15; /* nasid of the */
/* bits 20:6 */ /* first bit in uvhub map */
unsigned int command:8; /* message type */
/* bits 28:21 */
@@ -378,6 +380,10 @@
unsigned long d_rcanceled; /* number of messages canceled by resets */
};
+struct hub_and_pnode {
+ short uvhub;
+ short pnode;
+};
/*
* one per-cpu; to locate the software tables
*/
@@ -399,10 +405,12 @@
int baudisabled;
int set_bau_off;
short cpu;
+ short osnode;
short uvhub_cpu;
short uvhub;
short cpus_in_socket;
short cpus_in_uvhub;
+ short partition_base_pnode;
unsigned short message_number;
unsigned short uvhub_quiesce;
short socket_acknowledge_count[DEST_Q_SIZE];
@@ -422,15 +430,16 @@
int congested_period;
cycles_t period_time;
long period_requests;
+ struct hub_and_pnode *target_hub_and_pnode;
};
static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp)
{
return constant_test_bit(uvhub, &dstp->bits[0]);
}
-static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp)
+static inline void bau_uvhub_set(int pnode, struct bau_target_uvhubmask *dstp)
{
- __set_bit(uvhub, &dstp->bits[0]);
+ __set_bit(pnode, &dstp->bits[0]);
}
static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp,
int nbits)
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a501741..4298002 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -398,6 +398,8 @@
unsigned short nr_online_cpus;
unsigned short pnode;
short memory_nid;
+ spinlock_t nmi_lock;
+ unsigned long nmi_count;
};
extern struct uv_blade_info *uv_blade_info;
extern short *uv_node_to_blade;
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 20cafea..f5bb64a 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,7 +5,7 @@
*
* SGI UV MMR definitions
*
- * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2011 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_X86_UV_UV_MMRS_H
@@ -1099,5 +1099,19 @@
} s;
};
+/* ========================================================================= */
+/* UVH_SCRATCH5 */
+/* ========================================================================= */
+#define UVH_SCRATCH5 0x2d0200UL
+#define UVH_SCRATCH5_32 0x00778
+
+#define UVH_SCRATCH5_SCRATCH5_SHFT 0
+#define UVH_SCRATCH5_SCRATCH5_MASK 0xffffffffffffffffUL
+union uvh_scratch5_u {
+ unsigned long v;
+ struct uvh_scratch5_s {
+ unsigned long scratch5 : 64; /* RW, W1CS */
+ } s;
+};
#endif /* __ASM_UV_MMRS_X86_H__ */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 643ebf2..d3d8590 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -68,6 +68,17 @@
};
/**
+ * struct x86_init_mapping - platform specific initial kernel pagetable setup
+ * @pagetable_reserve: reserve a range of addresses for kernel pagetable usage
+ *
+ * For more details on the purpose of this hook, look in
+ * init_memory_mapping and the commit that added it.
+ */
+struct x86_init_mapping {
+ void (*pagetable_reserve)(u64 start, u64 end);
+};
+
+/**
* struct x86_init_paging - platform specific paging functions
* @pagetable_setup_start: platform specific pre paging_init() call
* @pagetable_setup_done: platform specific post paging_init() call
@@ -123,6 +134,7 @@
struct x86_init_mpparse mpparse;
struct x86_init_irqs irqs;
struct x86_init_oem oem;
+ struct x86_init_mapping mapping;
struct x86_init_paging paging;
struct x86_init_timers timers;
struct x86_init_iommu iommu;
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index c61934f..64a619d 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -47,8 +47,9 @@
extern unsigned long set_phys_range_identity(unsigned long pfn_s,
unsigned long pfn_e);
-extern int m2p_add_override(unsigned long mfn, struct page *page);
-extern int m2p_remove_override(struct page *page);
+extern int m2p_add_override(unsigned long mfn, struct page *page,
+ bool clear_pte);
+extern int m2p_remove_override(struct page *page, bool clear_pte);
extern struct page *m2p_find_override(unsigned long mfn);
extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn);
diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h
index aa86209..4fbda9a 100644
--- a/arch/x86/include/asm/xen/pci.h
+++ b/arch/x86/include/asm/xen/pci.h
@@ -15,10 +15,26 @@
#endif
#if defined(CONFIG_XEN_DOM0)
void __init xen_setup_pirqs(void);
+int xen_find_device_domain_owner(struct pci_dev *dev);
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain);
+int xen_unregister_device_domain_owner(struct pci_dev *dev);
#else
static inline void __init xen_setup_pirqs(void)
{
}
+static inline int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+ return -1;
+}
+static inline int xen_register_device_domain_owner(struct pci_dev *dev,
+ uint16_t domain)
+{
+ return -1;
+}
+static inline int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+ return -1;
+}
#endif
#if defined(CONFIG_PCI_MSI)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 7338ef2..2508064 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -36,7 +36,7 @@
obj-y += time.o ioport.o ldt.o dumpstack.o
obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
-obj-$(CONFIG_X86_32) += probe_roms_32.o
+obj-y += probe_roms.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o
@@ -117,7 +117,7 @@
ifeq ($(CONFIG_X86_64),y)
obj-$(CONFIG_AUDIT) += audit_64.o
- obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
+ obj-$(CONFIG_GART_IOMMU) += amd_gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_AMD_IOMMU) += amd_iommu_init.o amd_iommu.o
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index ff93bc1..18a857b 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -112,11 +112,6 @@
#ifdef CONFIG_HIBERNATION
if (strncmp(str, "s4_nohwsig", 10) == 0)
acpi_no_s4_hw_signature();
- if (strncmp(str, "s4_nonvs", 8) == 0) {
- pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
- "please use acpi_sleep=nonvs instead");
- acpi_nvs_nosave();
- }
#endif
if (strncmp(str, "nonvs", 5) == 0)
acpi_nvs_nosave();
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 4a23467..a81f2d5 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -67,17 +67,30 @@
#define DPRINTK(fmt, args...) if (debug_alternative) \
printk(KERN_DEBUG fmt, args)
+/*
+ * Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
+ * that correspond to that nop. Getting from one nop to the next, we
+ * add to the array the offset that is equal to the sum of all sizes of
+ * nops preceding the one we are after.
+ *
+ * Note: The GENERIC_NOP5_ATOMIC is at the end, as it breaks the
+ * nice symmetry of sizes of the previous nops.
+ */
#if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64)
-/* Use inline assembly to define this because the nops are defined
- as inline assembly strings in the include files and we cannot
- get them easily into strings. */
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: "
- GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
- GENERIC_NOP7 GENERIC_NOP8
- "\t.previous");
-extern const unsigned char intelnops[];
-static const unsigned char *const __initconst_or_module
-intel_nops[ASM_NOP_MAX+1] = {
+static const unsigned char intelnops[] =
+{
+ GENERIC_NOP1,
+ GENERIC_NOP2,
+ GENERIC_NOP3,
+ GENERIC_NOP4,
+ GENERIC_NOP5,
+ GENERIC_NOP6,
+ GENERIC_NOP7,
+ GENERIC_NOP8,
+ GENERIC_NOP5_ATOMIC
+};
+static const unsigned char * const intel_nops[ASM_NOP_MAX+2] =
+{
NULL,
intelnops,
intelnops + 1,
@@ -87,17 +100,25 @@
intelnops + 1 + 2 + 3 + 4 + 5,
intelnops + 1 + 2 + 3 + 4 + 5 + 6,
intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+ intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
};
#endif
#ifdef K8_NOP1
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: "
- K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
- K8_NOP7 K8_NOP8
- "\t.previous");
-extern const unsigned char k8nops[];
-static const unsigned char *const __initconst_or_module
-k8_nops[ASM_NOP_MAX+1] = {
+static const unsigned char k8nops[] =
+{
+ K8_NOP1,
+ K8_NOP2,
+ K8_NOP3,
+ K8_NOP4,
+ K8_NOP5,
+ K8_NOP6,
+ K8_NOP7,
+ K8_NOP8,
+ K8_NOP5_ATOMIC
+};
+static const unsigned char * const k8_nops[ASM_NOP_MAX+2] =
+{
NULL,
k8nops,
k8nops + 1,
@@ -107,17 +128,25 @@
k8nops + 1 + 2 + 3 + 4 + 5,
k8nops + 1 + 2 + 3 + 4 + 5 + 6,
k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+ k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
};
#endif
#if defined(K7_NOP1) && !defined(CONFIG_X86_64)
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: "
- K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
- K7_NOP7 K7_NOP8
- "\t.previous");
-extern const unsigned char k7nops[];
-static const unsigned char *const __initconst_or_module
-k7_nops[ASM_NOP_MAX+1] = {
+static const unsigned char k7nops[] =
+{
+ K7_NOP1,
+ K7_NOP2,
+ K7_NOP3,
+ K7_NOP4,
+ K7_NOP5,
+ K7_NOP6,
+ K7_NOP7,
+ K7_NOP8,
+ K7_NOP5_ATOMIC
+};
+static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
+{
NULL,
k7nops,
k7nops + 1,
@@ -127,17 +156,25 @@
k7nops + 1 + 2 + 3 + 4 + 5,
k7nops + 1 + 2 + 3 + 4 + 5 + 6,
k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+ k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
};
#endif
#ifdef P6_NOP1
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: "
- P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
- P6_NOP7 P6_NOP8
- "\t.previous");
-extern const unsigned char p6nops[];
-static const unsigned char *const __initconst_or_module
-p6_nops[ASM_NOP_MAX+1] = {
+static const unsigned char __initconst_or_module p6nops[] =
+{
+ P6_NOP1,
+ P6_NOP2,
+ P6_NOP3,
+ P6_NOP4,
+ P6_NOP5,
+ P6_NOP6,
+ P6_NOP7,
+ P6_NOP8,
+ P6_NOP5_ATOMIC
+};
+static const unsigned char * const p6_nops[ASM_NOP_MAX+2] =
+{
NULL,
p6nops,
p6nops + 1,
@@ -147,47 +184,65 @@
p6nops + 1 + 2 + 3 + 4 + 5,
p6nops + 1 + 2 + 3 + 4 + 5 + 6,
p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+ p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
};
#endif
+/* Initialize these to a safe default */
#ifdef CONFIG_X86_64
+const unsigned char * const *ideal_nops = p6_nops;
+#else
+const unsigned char * const *ideal_nops = intel_nops;
+#endif
-extern char __vsyscall_0;
-static const unsigned char *const *__init_or_module find_nop_table(void)
+void __init arch_init_ideal_nops(void)
{
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_has(X86_FEATURE_NOPL))
- return p6_nops;
- else
- return k8_nops;
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ /*
+ * Due to a decoder implementation quirk, some
+ * specific Intel CPUs actually perform better with
+ * the "k8_nops" than with the SDM-recommended NOPs.
+ */
+ if (boot_cpu_data.x86 == 6 &&
+ boot_cpu_data.x86_model >= 0x0f &&
+ boot_cpu_data.x86_model != 0x1c &&
+ boot_cpu_data.x86_model != 0x26 &&
+ boot_cpu_data.x86_model != 0x27 &&
+ boot_cpu_data.x86_model < 0x30) {
+ ideal_nops = k8_nops;
+ } else if (boot_cpu_has(X86_FEATURE_NOPL)) {
+ ideal_nops = p6_nops;
+ } else {
+#ifdef CONFIG_X86_64
+ ideal_nops = k8_nops;
+#else
+ ideal_nops = intel_nops;
+#endif
+ }
+
+ default:
+#ifdef CONFIG_X86_64
+ ideal_nops = k8_nops;
+#else
+ if (boot_cpu_has(X86_FEATURE_K8))
+ ideal_nops = k8_nops;
+ else if (boot_cpu_has(X86_FEATURE_K7))
+ ideal_nops = k7_nops;
+ else
+ ideal_nops = intel_nops;
+#endif
+ }
}
-#else /* CONFIG_X86_64 */
-
-static const unsigned char *const *__init_or_module find_nop_table(void)
-{
- if (boot_cpu_has(X86_FEATURE_K8))
- return k8_nops;
- else if (boot_cpu_has(X86_FEATURE_K7))
- return k7_nops;
- else if (boot_cpu_has(X86_FEATURE_NOPL))
- return p6_nops;
- else
- return intel_nops;
-}
-
-#endif /* CONFIG_X86_64 */
-
/* Use this to add nops to a buffer, then text_poke the whole buffer. */
static void __init_or_module add_nops(void *insns, unsigned int len)
{
- const unsigned char *const *noptable = find_nop_table();
-
while (len > 0) {
unsigned int noplen = len;
if (noplen > ASM_NOP_MAX)
noplen = ASM_NOP_MAX;
- memcpy(insns, noptable[noplen], noplen);
+ memcpy(insns, ideal_nops[noplen], noplen);
insns += noplen;
len -= noplen;
}
@@ -195,6 +250,7 @@
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
extern s32 __smp_locks[], __smp_locks_end[];
+extern char __vsyscall_0;
void *text_poke_early(void *addr, const void *opcode, size_t len);
/* Replace instructions with better alternatives for this CPU type.
@@ -210,6 +266,15 @@
u8 insnbuf[MAX_PATCH_LEN];
DPRINTK("%s: alt table %p -> %p\n", __func__, start, end);
+ /*
+ * The scan order should be from start to end. A later scanned
+ * alternative code can overwrite a previous scanned alternative code.
+ * Some kernel functions (e.g. memcpy, memset, etc) use this order to
+ * patch code.
+ *
+ * So be careful if you want to change the scan order to any other
+ * order.
+ */
for (a = start; a < end; a++) {
u8 *instr = a->instr;
BUG_ON(a->replacementlen > a->instrlen);
@@ -678,29 +743,3 @@
wrote_text = 0;
__stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
}
-
-#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
-
-#ifdef CONFIG_X86_64
-unsigned char ideal_nop5[5] = { 0x66, 0x66, 0x66, 0x66, 0x90 };
-#else
-unsigned char ideal_nop5[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
-#endif
-
-void __init arch_init_ideal_nop5(void)
-{
- /*
- * There is no good nop for all x86 archs. This selection
- * algorithm should be unified with the one in find_nop_table(),
- * but this should be good enough for now.
- *
- * For cases other than the ones below, use the safe (as in
- * always functional) defaults above.
- */
-#ifdef CONFIG_X86_64
- /* Don't use these on 32 bits due to broken virtualizers */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
- memcpy(ideal_nop5, p6_nops[5], 5);
-#endif
-}
-#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/amd_gart_64.c
similarity index 100%
rename from arch/x86/kernel/pci-gart_64.c
rename to arch/x86/kernel/amd_gart_64.c
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 57ca777..873e7e1 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -18,6 +18,7 @@
*/
#include <linux/pci.h>
+#include <linux/pci-ats.h>
#include <linux/bitmap.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
@@ -25,6 +26,7 @@
#include <linux/dma-mapping.h>
#include <linux/iommu-helper.h>
#include <linux/iommu.h>
+#include <linux/delay.h>
#include <asm/proto.h>
#include <asm/iommu.h>
#include <asm/gart.h>
@@ -34,7 +36,7 @@
#define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
-#define EXIT_LOOP_COUNT 10000000
+#define LOOP_TIMEOUT 100000
static DEFINE_RWLOCK(amd_iommu_devtable_lock);
@@ -57,7 +59,6 @@
u32 data[4];
};
-static void reset_iommu_command_buffer(struct amd_iommu *iommu);
static void update_domain(struct protection_domain *domain);
/****************************************************************************
@@ -322,8 +323,6 @@
break;
case EVENT_TYPE_ILL_CMD:
printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
- iommu->reset_in_progress = true;
- reset_iommu_command_buffer(iommu);
dump_command(address);
break;
case EVENT_TYPE_CMD_HARD_ERR:
@@ -367,7 +366,7 @@
spin_unlock_irqrestore(&iommu->lock, flags);
}
-irqreturn_t amd_iommu_int_handler(int irq, void *data)
+irqreturn_t amd_iommu_int_thread(int irq, void *data)
{
struct amd_iommu *iommu;
@@ -377,130 +376,360 @@
return IRQ_HANDLED;
}
+irqreturn_t amd_iommu_int_handler(int irq, void *data)
+{
+ return IRQ_WAKE_THREAD;
+}
+
/****************************************************************************
*
* IOMMU command queuing functions
*
****************************************************************************/
-/*
- * Writes the command to the IOMMUs command buffer and informs the
- * hardware about the new command. Must be called with iommu->lock held.
- */
-static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+static int wait_on_sem(volatile u64 *sem)
{
- u32 tail, head;
- u8 *target;
+ int i = 0;
- WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED);
- tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
- target = iommu->cmd_buf + tail;
- memcpy_toio(target, cmd, sizeof(*cmd));
- tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
- head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
- if (tail == head)
- return -ENOMEM;
- writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+ while (*sem == 0 && i < LOOP_TIMEOUT) {
+ udelay(1);
+ i += 1;
+ }
+
+ if (i == LOOP_TIMEOUT) {
+ pr_alert("AMD-Vi: Completion-Wait loop timed out\n");
+ return -EIO;
+ }
return 0;
}
-/*
- * General queuing function for commands. Takes iommu->lock and calls
- * __iommu_queue_command().
- */
-static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+static void copy_cmd_to_buffer(struct amd_iommu *iommu,
+ struct iommu_cmd *cmd,
+ u32 tail)
{
- unsigned long flags;
- int ret;
+ u8 *target;
- spin_lock_irqsave(&iommu->lock, flags);
- ret = __iommu_queue_command(iommu, cmd);
- if (!ret)
- iommu->need_sync = true;
- spin_unlock_irqrestore(&iommu->lock, flags);
+ target = iommu->cmd_buf + tail;
+ tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
- return ret;
+ /* Copy command to buffer */
+ memcpy(target, cmd, sizeof(*cmd));
+
+ /* Tell the IOMMU about it */
+ writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+}
+
+static void build_completion_wait(struct iommu_cmd *cmd, u64 address)
+{
+ WARN_ON(address & 0x7ULL);
+
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->data[0] = lower_32_bits(__pa(address)) | CMD_COMPL_WAIT_STORE_MASK;
+ cmd->data[1] = upper_32_bits(__pa(address));
+ cmd->data[2] = 1;
+ CMD_SET_TYPE(cmd, CMD_COMPL_WAIT);
+}
+
+static void build_inv_dte(struct iommu_cmd *cmd, u16 devid)
+{
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->data[0] = devid;
+ CMD_SET_TYPE(cmd, CMD_INV_DEV_ENTRY);
+}
+
+static void build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address,
+ size_t size, u16 domid, int pde)
+{
+ u64 pages;
+ int s;
+
+ pages = iommu_num_pages(address, size, PAGE_SIZE);
+ s = 0;
+
+ if (pages > 1) {
+ /*
+ * If we have to flush more than one page, flush all
+ * TLB entries for this domain
+ */
+ address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+ s = 1;
+ }
+
+ address &= PAGE_MASK;
+
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->data[1] |= domid;
+ cmd->data[2] = lower_32_bits(address);
+ cmd->data[3] = upper_32_bits(address);
+ CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES);
+ if (s) /* size bit - we flush more than one 4kb page */
+ cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
+ if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
+ cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
+}
+
+static void build_inv_iotlb_pages(struct iommu_cmd *cmd, u16 devid, int qdep,
+ u64 address, size_t size)
+{
+ u64 pages;
+ int s;
+
+ pages = iommu_num_pages(address, size, PAGE_SIZE);
+ s = 0;
+
+ if (pages > 1) {
+ /*
+ * If we have to flush more than one page, flush all
+ * TLB entries for this domain
+ */
+ address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+ s = 1;
+ }
+
+ address &= PAGE_MASK;
+
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->data[0] = devid;
+ cmd->data[0] |= (qdep & 0xff) << 24;
+ cmd->data[1] = devid;
+ cmd->data[2] = lower_32_bits(address);
+ cmd->data[3] = upper_32_bits(address);
+ CMD_SET_TYPE(cmd, CMD_INV_IOTLB_PAGES);
+ if (s)
+ cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
+}
+
+static void build_inv_all(struct iommu_cmd *cmd)
+{
+ memset(cmd, 0, sizeof(*cmd));
+ CMD_SET_TYPE(cmd, CMD_INV_ALL);
}
/*
- * This function waits until an IOMMU has completed a completion
- * wait command
+ * Writes the command to the IOMMUs command buffer and informs the
+ * hardware about the new command.
*/
-static void __iommu_wait_for_completion(struct amd_iommu *iommu)
+static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
{
- int ready = 0;
- unsigned status = 0;
- unsigned long i = 0;
+ u32 left, tail, head, next_tail;
+ unsigned long flags;
- INC_STATS_COUNTER(compl_wait);
+ WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED);
- while (!ready && (i < EXIT_LOOP_COUNT)) {
- ++i;
- /* wait for the bit to become one */
- status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
- ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
+again:
+ spin_lock_irqsave(&iommu->lock, flags);
+
+ head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+ tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+ next_tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
+ left = (head - next_tail) % iommu->cmd_buf_size;
+
+ if (left <= 2) {
+ struct iommu_cmd sync_cmd;
+ volatile u64 sem = 0;
+ int ret;
+
+ build_completion_wait(&sync_cmd, (u64)&sem);
+ copy_cmd_to_buffer(iommu, &sync_cmd, tail);
+
+ spin_unlock_irqrestore(&iommu->lock, flags);
+
+ if ((ret = wait_on_sem(&sem)) != 0)
+ return ret;
+
+ goto again;
}
- /* set bit back to zero */
- status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
- writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+ copy_cmd_to_buffer(iommu, cmd, tail);
- if (unlikely(i == EXIT_LOOP_COUNT))
- iommu->reset_in_progress = true;
+ /* We need to sync now to make sure all commands are processed */
+ iommu->need_sync = true;
+
+ spin_unlock_irqrestore(&iommu->lock, flags);
+
+ return 0;
}
/*
* This function queues a completion wait command into the command
* buffer of an IOMMU
*/
-static int __iommu_completion_wait(struct amd_iommu *iommu)
+static int iommu_completion_wait(struct amd_iommu *iommu)
+{
+ struct iommu_cmd cmd;
+ volatile u64 sem = 0;
+ int ret;
+
+ if (!iommu->need_sync)
+ return 0;
+
+ build_completion_wait(&cmd, (u64)&sem);
+
+ ret = iommu_queue_command(iommu, &cmd);
+ if (ret)
+ return ret;
+
+ return wait_on_sem(&sem);
+}
+
+static int iommu_flush_dte(struct amd_iommu *iommu, u16 devid)
{
struct iommu_cmd cmd;
- memset(&cmd, 0, sizeof(cmd));
- cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
- CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
+ build_inv_dte(&cmd, devid);
- return __iommu_queue_command(iommu, &cmd);
+ return iommu_queue_command(iommu, &cmd);
+}
+
+static void iommu_flush_dte_all(struct amd_iommu *iommu)
+{
+ u32 devid;
+
+ for (devid = 0; devid <= 0xffff; ++devid)
+ iommu_flush_dte(iommu, devid);
+
+ iommu_completion_wait(iommu);
}
/*
- * This function is called whenever we need to ensure that the IOMMU has
- * completed execution of all commands we sent. It sends a
- * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs
- * us about that by writing a value to a physical address we pass with
- * the command.
+ * This function uses heavy locking and may disable irqs for some time. But
+ * this is no issue because it is only called during resume.
*/
-static int iommu_completion_wait(struct amd_iommu *iommu)
+static void iommu_flush_tlb_all(struct amd_iommu *iommu)
{
- int ret = 0;
- unsigned long flags;
+ u32 dom_id;
- spin_lock_irqsave(&iommu->lock, flags);
+ for (dom_id = 0; dom_id <= 0xffff; ++dom_id) {
+ struct iommu_cmd cmd;
+ build_inv_iommu_pages(&cmd, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
+ dom_id, 1);
+ iommu_queue_command(iommu, &cmd);
+ }
- if (!iommu->need_sync)
- goto out;
-
- ret = __iommu_completion_wait(iommu);
-
- iommu->need_sync = false;
-
- if (ret)
- goto out;
-
- __iommu_wait_for_completion(iommu);
-
-out:
- spin_unlock_irqrestore(&iommu->lock, flags);
-
- if (iommu->reset_in_progress)
- reset_iommu_command_buffer(iommu);
-
- return 0;
+ iommu_completion_wait(iommu);
}
-static void iommu_flush_complete(struct protection_domain *domain)
+static void iommu_flush_all(struct amd_iommu *iommu)
+{
+ struct iommu_cmd cmd;
+
+ build_inv_all(&cmd);
+
+ iommu_queue_command(iommu, &cmd);
+ iommu_completion_wait(iommu);
+}
+
+void iommu_flush_all_caches(struct amd_iommu *iommu)
+{
+ if (iommu_feature(iommu, FEATURE_IA)) {
+ iommu_flush_all(iommu);
+ } else {
+ iommu_flush_dte_all(iommu);
+ iommu_flush_tlb_all(iommu);
+ }
+}
+
+/*
+ * Command send function for flushing on-device TLB
+ */
+static int device_flush_iotlb(struct device *dev, u64 address, size_t size)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct amd_iommu *iommu;
+ struct iommu_cmd cmd;
+ u16 devid;
+ int qdep;
+
+ qdep = pci_ats_queue_depth(pdev);
+ devid = get_device_id(dev);
+ iommu = amd_iommu_rlookup_table[devid];
+
+ build_inv_iotlb_pages(&cmd, devid, qdep, address, size);
+
+ return iommu_queue_command(iommu, &cmd);
+}
+
+/*
+ * Command send function for invalidating a device table entry
+ */
+static int device_flush_dte(struct device *dev)
+{
+ struct amd_iommu *iommu;
+ struct pci_dev *pdev;
+ u16 devid;
+ int ret;
+
+ pdev = to_pci_dev(dev);
+ devid = get_device_id(dev);
+ iommu = amd_iommu_rlookup_table[devid];
+
+ ret = iommu_flush_dte(iommu, devid);
+ if (ret)
+ return ret;
+
+ if (pci_ats_enabled(pdev))
+ ret = device_flush_iotlb(dev, 0, ~0UL);
+
+ return ret;
+}
+
+/*
+ * TLB invalidation function which is called from the mapping functions.
+ * It invalidates a single PTE if the range to flush is within a single
+ * page. Otherwise it flushes the whole TLB of the IOMMU.
+ */
+static void __domain_flush_pages(struct protection_domain *domain,
+ u64 address, size_t size, int pde)
+{
+ struct iommu_dev_data *dev_data;
+ struct iommu_cmd cmd;
+ int ret = 0, i;
+
+ build_inv_iommu_pages(&cmd, address, size, domain->id, pde);
+
+ for (i = 0; i < amd_iommus_present; ++i) {
+ if (!domain->dev_iommu[i])
+ continue;
+
+ /*
+ * Devices of this domain are behind this IOMMU
+ * We need a TLB flush
+ */
+ ret |= iommu_queue_command(amd_iommus[i], &cmd);
+ }
+
+ list_for_each_entry(dev_data, &domain->dev_list, list) {
+ struct pci_dev *pdev = to_pci_dev(dev_data->dev);
+
+ if (!pci_ats_enabled(pdev))
+ continue;
+
+ ret |= device_flush_iotlb(dev_data->dev, address, size);
+ }
+
+ WARN_ON(ret);
+}
+
+static void domain_flush_pages(struct protection_domain *domain,
+ u64 address, size_t size)
+{
+ __domain_flush_pages(domain, address, size, 0);
+}
+
+/* Flush the whole IO/TLB for a given protection domain */
+static void domain_flush_tlb(struct protection_domain *domain)
+{
+ __domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0);
+}
+
+/* Flush the whole IO/TLB for a given protection domain - including PDE */
+static void domain_flush_tlb_pde(struct protection_domain *domain)
+{
+ __domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1);
+}
+
+static void domain_flush_complete(struct protection_domain *domain)
{
int i;
@@ -516,118 +745,11 @@
}
}
-/*
- * Command send function for invalidating a device table entry
- */
-static int iommu_flush_device(struct device *dev)
-{
- struct amd_iommu *iommu;
- struct iommu_cmd cmd;
- u16 devid;
-
- devid = get_device_id(dev);
- iommu = amd_iommu_rlookup_table[devid];
-
- /* Build command */
- memset(&cmd, 0, sizeof(cmd));
- CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
- cmd.data[0] = devid;
-
- return iommu_queue_command(iommu, &cmd);
-}
-
-static void __iommu_build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address,
- u16 domid, int pde, int s)
-{
- memset(cmd, 0, sizeof(*cmd));
- address &= PAGE_MASK;
- CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES);
- cmd->data[1] |= domid;
- cmd->data[2] = lower_32_bits(address);
- cmd->data[3] = upper_32_bits(address);
- if (s) /* size bit - we flush more than one 4kb page */
- cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
- if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
- cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
-}
-
-/*
- * Generic command send function for invalidaing TLB entries
- */
-static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
- u64 address, u16 domid, int pde, int s)
-{
- struct iommu_cmd cmd;
- int ret;
-
- __iommu_build_inv_iommu_pages(&cmd, address, domid, pde, s);
-
- ret = iommu_queue_command(iommu, &cmd);
-
- return ret;
-}
-
-/*
- * TLB invalidation function which is called from the mapping functions.
- * It invalidates a single PTE if the range to flush is within a single
- * page. Otherwise it flushes the whole TLB of the IOMMU.
- */
-static void __iommu_flush_pages(struct protection_domain *domain,
- u64 address, size_t size, int pde)
-{
- int s = 0, i;
- unsigned long pages = iommu_num_pages(address, size, PAGE_SIZE);
-
- address &= PAGE_MASK;
-
- if (pages > 1) {
- /*
- * If we have to flush more than one page, flush all
- * TLB entries for this domain
- */
- address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
- s = 1;
- }
-
-
- for (i = 0; i < amd_iommus_present; ++i) {
- if (!domain->dev_iommu[i])
- continue;
-
- /*
- * Devices of this domain are behind this IOMMU
- * We need a TLB flush
- */
- iommu_queue_inv_iommu_pages(amd_iommus[i], address,
- domain->id, pde, s);
- }
-
- return;
-}
-
-static void iommu_flush_pages(struct protection_domain *domain,
- u64 address, size_t size)
-{
- __iommu_flush_pages(domain, address, size, 0);
-}
-
-/* Flush the whole IO/TLB for a given protection domain */
-static void iommu_flush_tlb(struct protection_domain *domain)
-{
- __iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0);
-}
-
-/* Flush the whole IO/TLB for a given protection domain - including PDE */
-static void iommu_flush_tlb_pde(struct protection_domain *domain)
-{
- __iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1);
-}
-
/*
* This function flushes the DTEs for all devices in domain
*/
-static void iommu_flush_domain_devices(struct protection_domain *domain)
+static void domain_flush_devices(struct protection_domain *domain)
{
struct iommu_dev_data *dev_data;
unsigned long flags;
@@ -635,66 +757,11 @@
spin_lock_irqsave(&domain->lock, flags);
list_for_each_entry(dev_data, &domain->dev_list, list)
- iommu_flush_device(dev_data->dev);
+ device_flush_dte(dev_data->dev);
spin_unlock_irqrestore(&domain->lock, flags);
}
-static void iommu_flush_all_domain_devices(void)
-{
- struct protection_domain *domain;
- unsigned long flags;
-
- spin_lock_irqsave(&amd_iommu_pd_lock, flags);
-
- list_for_each_entry(domain, &amd_iommu_pd_list, list) {
- iommu_flush_domain_devices(domain);
- iommu_flush_complete(domain);
- }
-
- spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
-}
-
-void amd_iommu_flush_all_devices(void)
-{
- iommu_flush_all_domain_devices();
-}
-
-/*
- * This function uses heavy locking and may disable irqs for some time. But
- * this is no issue because it is only called during resume.
- */
-void amd_iommu_flush_all_domains(void)
-{
- struct protection_domain *domain;
- unsigned long flags;
-
- spin_lock_irqsave(&amd_iommu_pd_lock, flags);
-
- list_for_each_entry(domain, &amd_iommu_pd_list, list) {
- spin_lock(&domain->lock);
- iommu_flush_tlb_pde(domain);
- iommu_flush_complete(domain);
- spin_unlock(&domain->lock);
- }
-
- spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
-}
-
-static void reset_iommu_command_buffer(struct amd_iommu *iommu)
-{
- pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
-
- if (iommu->reset_in_progress)
- panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
-
- amd_iommu_reset_cmd_buffer(iommu);
- amd_iommu_flush_all_devices();
- amd_iommu_flush_all_domains();
-
- iommu->reset_in_progress = false;
-}
-
/****************************************************************************
*
* The functions below are used the create the page table mappings for
@@ -1410,17 +1477,22 @@
return domain->flags & PD_DMA_OPS_MASK;
}
-static void set_dte_entry(u16 devid, struct protection_domain *domain)
+static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
{
u64 pte_root = virt_to_phys(domain->pt_root);
+ u32 flags = 0;
pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
<< DEV_ENTRY_MODE_SHIFT;
pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
- amd_iommu_dev_table[devid].data[2] = domain->id;
- amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
- amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+ if (ats)
+ flags |= DTE_FLAG_IOTLB;
+
+ amd_iommu_dev_table[devid].data[3] |= flags;
+ amd_iommu_dev_table[devid].data[2] = domain->id;
+ amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
+ amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
}
static void clear_dte_entry(u16 devid)
@@ -1437,34 +1509,42 @@
{
struct iommu_dev_data *dev_data;
struct amd_iommu *iommu;
+ struct pci_dev *pdev;
+ bool ats = false;
u16 devid;
devid = get_device_id(dev);
iommu = amd_iommu_rlookup_table[devid];
dev_data = get_dev_data(dev);
+ pdev = to_pci_dev(dev);
+
+ if (amd_iommu_iotlb_sup)
+ ats = pci_ats_enabled(pdev);
/* Update data structures */
dev_data->domain = domain;
list_add(&dev_data->list, &domain->dev_list);
- set_dte_entry(devid, domain);
+ set_dte_entry(devid, domain, ats);
/* Do reference counting */
domain->dev_iommu[iommu->index] += 1;
domain->dev_cnt += 1;
/* Flush the DTE entry */
- iommu_flush_device(dev);
+ device_flush_dte(dev);
}
static void do_detach(struct device *dev)
{
struct iommu_dev_data *dev_data;
struct amd_iommu *iommu;
+ struct pci_dev *pdev;
u16 devid;
devid = get_device_id(dev);
iommu = amd_iommu_rlookup_table[devid];
dev_data = get_dev_data(dev);
+ pdev = to_pci_dev(dev);
/* decrease reference counters */
dev_data->domain->dev_iommu[iommu->index] -= 1;
@@ -1476,7 +1556,7 @@
clear_dte_entry(devid);
/* Flush the DTE entry */
- iommu_flush_device(dev);
+ device_flush_dte(dev);
}
/*
@@ -1539,9 +1619,13 @@
static int attach_device(struct device *dev,
struct protection_domain *domain)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
unsigned long flags;
int ret;
+ if (amd_iommu_iotlb_sup)
+ pci_enable_ats(pdev, PAGE_SHIFT);
+
write_lock_irqsave(&amd_iommu_devtable_lock, flags);
ret = __attach_device(dev, domain);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
@@ -1551,7 +1635,7 @@
* left the caches in the IOMMU dirty. So we have to flush
* here to evict all dirty stuff.
*/
- iommu_flush_tlb_pde(domain);
+ domain_flush_tlb_pde(domain);
return ret;
}
@@ -1598,12 +1682,16 @@
*/
static void detach_device(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
unsigned long flags;
/* lock device table */
write_lock_irqsave(&amd_iommu_devtable_lock, flags);
__detach_device(dev);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+ if (amd_iommu_iotlb_sup && pci_ats_enabled(pdev))
+ pci_disable_ats(pdev);
}
/*
@@ -1692,7 +1780,7 @@
goto out;
}
- iommu_flush_device(dev);
+ device_flush_dte(dev);
iommu_completion_wait(iommu);
out:
@@ -1753,8 +1841,9 @@
struct iommu_dev_data *dev_data;
list_for_each_entry(dev_data, &domain->dev_list, list) {
+ struct pci_dev *pdev = to_pci_dev(dev_data->dev);
u16 devid = get_device_id(dev_data->dev);
- set_dte_entry(devid, domain);
+ set_dte_entry(devid, domain, pci_ats_enabled(pdev));
}
}
@@ -1764,8 +1853,9 @@
return;
update_device_table(domain);
- iommu_flush_domain_devices(domain);
- iommu_flush_tlb_pde(domain);
+
+ domain_flush_devices(domain);
+ domain_flush_tlb_pde(domain);
domain->updated = false;
}
@@ -1924,10 +2014,10 @@
ADD_STATS_COUNTER(alloced_io_mem, size);
if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) {
- iommu_flush_tlb(&dma_dom->domain);
+ domain_flush_tlb(&dma_dom->domain);
dma_dom->need_flush = false;
} else if (unlikely(amd_iommu_np_cache))
- iommu_flush_pages(&dma_dom->domain, address, size);
+ domain_flush_pages(&dma_dom->domain, address, size);
out:
return address;
@@ -1976,7 +2066,7 @@
dma_ops_free_addresses(dma_dom, dma_addr, pages);
if (amd_iommu_unmap_flush || dma_dom->need_flush) {
- iommu_flush_pages(&dma_dom->domain, flush_addr, size);
+ domain_flush_pages(&dma_dom->domain, flush_addr, size);
dma_dom->need_flush = false;
}
}
@@ -2012,7 +2102,7 @@
if (addr == DMA_ERROR_CODE)
goto out;
- iommu_flush_complete(domain);
+ domain_flush_complete(domain);
out:
spin_unlock_irqrestore(&domain->lock, flags);
@@ -2039,7 +2129,7 @@
__unmap_single(domain->priv, dma_addr, size, dir);
- iommu_flush_complete(domain);
+ domain_flush_complete(domain);
spin_unlock_irqrestore(&domain->lock, flags);
}
@@ -2104,7 +2194,7 @@
goto unmap;
}
- iommu_flush_complete(domain);
+ domain_flush_complete(domain);
out:
spin_unlock_irqrestore(&domain->lock, flags);
@@ -2150,7 +2240,7 @@
s->dma_address = s->dma_length = 0;
}
- iommu_flush_complete(domain);
+ domain_flush_complete(domain);
spin_unlock_irqrestore(&domain->lock, flags);
}
@@ -2200,7 +2290,7 @@
goto out_free;
}
- iommu_flush_complete(domain);
+ domain_flush_complete(domain);
spin_unlock_irqrestore(&domain->lock, flags);
@@ -2232,7 +2322,7 @@
__unmap_single(domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
- iommu_flush_complete(domain);
+ domain_flush_complete(domain);
spin_unlock_irqrestore(&domain->lock, flags);
@@ -2476,7 +2566,7 @@
if (!iommu)
return;
- iommu_flush_device(dev);
+ device_flush_dte(dev);
iommu_completion_wait(iommu);
}
@@ -2542,7 +2632,7 @@
unmap_size = iommu_unmap_page(domain, iova, page_size);
mutex_unlock(&domain->api_lock);
- iommu_flush_tlb_pde(domain);
+ domain_flush_tlb_pde(domain);
return get_order(unmap_size);
}
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 246d727..9179c211 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -137,6 +137,7 @@
/* IOMMUs have a non-present cache? */
bool amd_iommu_np_cache __read_mostly;
+bool amd_iommu_iotlb_sup __read_mostly = true;
/*
* The ACPI table parsing functions set this variable on an error
@@ -180,6 +181,12 @@
static u32 alias_table_size; /* size of the alias table */
static u32 rlookup_table_size; /* size if the rlookup table */
+/*
+ * This function flushes all internal caches of
+ * the IOMMU used by this driver.
+ */
+extern void iommu_flush_all_caches(struct amd_iommu *iommu);
+
static inline void update_last_devid(u16 devid)
{
if (devid > amd_iommu_last_bdf)
@@ -293,9 +300,23 @@
/* Function to enable the hardware */
static void iommu_enable(struct amd_iommu *iommu)
{
- printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
+ static const char * const feat_str[] = {
+ "PreF", "PPR", "X2APIC", "NX", "GT", "[5]",
+ "IA", "GA", "HE", "PC", NULL
+ };
+ int i;
+
+ printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx",
dev_name(&iommu->dev->dev), iommu->cap_ptr);
+ if (iommu->cap & (1 << IOMMU_CAP_EFR)) {
+ printk(KERN_CONT " extended features: ");
+ for (i = 0; feat_str[i]; ++i)
+ if (iommu_feature(iommu, (1ULL << i)))
+ printk(KERN_CONT " %s", feat_str[i]);
+ }
+ printk(KERN_CONT "\n");
+
iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
}
@@ -651,7 +672,7 @@
static void __init init_iommu_from_pci(struct amd_iommu *iommu)
{
int cap_ptr = iommu->cap_ptr;
- u32 range, misc;
+ u32 range, misc, low, high;
int i, j;
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
@@ -667,6 +688,15 @@
MMIO_GET_LD(range));
iommu->evt_msi_num = MMIO_MSI_NUM(misc);
+ if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
+ amd_iommu_iotlb_sup = false;
+
+ /* read extended feature bits */
+ low = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
+ high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
+
+ iommu->features = ((u64)high << 32) | low;
+
if (!is_rd890_iommu(iommu->dev))
return;
@@ -1004,10 +1034,11 @@
if (pci_enable_msi(iommu->dev))
return 1;
- r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
- IRQF_SAMPLE_RANDOM,
- "AMD-Vi",
- NULL);
+ r = request_threaded_irq(iommu->dev->irq,
+ amd_iommu_int_handler,
+ amd_iommu_int_thread,
+ 0, "AMD-Vi",
+ iommu->dev);
if (r) {
pci_disable_msi(iommu->dev);
@@ -1244,6 +1275,7 @@
iommu_set_exclusion_range(iommu);
iommu_init_msi(iommu);
iommu_enable(iommu);
+ iommu_flush_all_caches(iommu);
}
}
@@ -1274,8 +1306,8 @@
* we have to flush after the IOMMUs are enabled because a
* disabled IOMMU will never execute the commands we send
*/
- amd_iommu_flush_all_devices();
- amd_iommu_flush_all_domains();
+ for_each_iommu(iommu)
+ iommu_flush_all_caches(iommu);
}
static int amd_iommu_suspend(void)
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index cd1ffed..289e928 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -177,7 +177,6 @@
.rating = APBT_CLOCKSOURCE_RATING,
.read = apbt_read_clocksource,
.mask = APBT_MASK,
- .shift = APBT_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = apbt_restart_clocksource,
};
@@ -543,14 +542,7 @@
if (t1 == apbt_read_clocksource(&clocksource_apbt))
panic("APBT counter not counting. APBT disabled\n");
- /*
- * initialize and register APBT clocksource
- * convert that to ns/clock cycle
- * mult = (ns/c) * 2^APBT_SHIFT
- */
- clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
- (unsigned long) apbt_freq, APBT_SHIFT);
- clocksource_register(&clocksource_apbt);
+ clocksource_register_khz(&clocksource_apbt, (u32)apbt_freq*1000);
return 0;
}
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 73fb469..3d2661c 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -30,6 +30,22 @@
#include <asm/amd_nb.h>
#include <asm/x86_init.h>
+/*
+ * Using 512M as goal, in case kexec will load kernel_big
+ * that will do the on-position decompress, and could overlap with
+ * with the gart aperture that is used.
+ * Sequence:
+ * kernel_small
+ * ==> kexec (with kdump trigger path or gart still enabled)
+ * ==> kernel_small (gart area become e820_reserved)
+ * ==> kexec (with kdump trigger path or gart still enabled)
+ * ==> kerne_big (uncompressed size will be big than 64M or 128M)
+ * So don't use 512M below as gart iommu, leave the space for kernel
+ * code for safe.
+ */
+#define GART_MIN_ADDR (512ULL << 20)
+#define GART_MAX_ADDR (1ULL << 32)
+
int gart_iommu_aperture;
int gart_iommu_aperture_disabled __initdata;
int gart_iommu_aperture_allowed __initdata;
@@ -70,21 +86,9 @@
* memory. Unfortunately we cannot move it up because that would
* make the IOMMU useless.
*/
- /*
- * using 512M as goal, in case kexec will load kernel_big
- * that will do the on position decompress, and could overlap with
- * that position with gart that is used.
- * sequende:
- * kernel_small
- * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
- * ==> kernel_small(gart area become e820_reserved)
- * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
- * ==> kerne_big (uncompressed size will be big than 64M or 128M)
- * so don't use 512M below as gart iommu, leave the space for kernel
- * code for safe
- */
- addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
- if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
+ addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR,
+ aper_size, aper_size);
+ if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) {
printk(KERN_ERR
"Cannot allocate aperture memory hole (%lx,%uK)\n",
addr, aper_size>>10);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index fabf01e..f92a8e5 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -505,7 +505,7 @@
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
- if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
+ if (this_cpu_has(X86_FEATURE_ARAT)) {
lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
/* Make LAPIC timer preferrable over percpu HPET */
lapic_clockevent.rating = 150;
@@ -1237,6 +1237,17 @@
/* always use the value from LDR */
early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
logical_smp_processor_id();
+
+ /*
+ * Some NUMA implementations (NUMAQ) don't initialize apicid to
+ * node mapping during NUMA init. Now that logical apicid is
+ * guaranteed to be known, give it another chance. This is already
+ * a bit too late - percpu allocation has already happened without
+ * proper NUMA affinity.
+ */
+ if (apic->x86_32_numa_cpu_node)
+ set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu),
+ apic->x86_32_numa_cpu_node(cpu));
#endif
/*
@@ -1812,30 +1823,41 @@
*/
void smp_error_interrupt(struct pt_regs *regs)
{
- u32 v, v1;
+ u32 v0, v1;
+ u32 i = 0;
+ static const char * const error_interrupt_reason[] = {
+ "Send CS error", /* APIC Error Bit 0 */
+ "Receive CS error", /* APIC Error Bit 1 */
+ "Send accept error", /* APIC Error Bit 2 */
+ "Receive accept error", /* APIC Error Bit 3 */
+ "Redirectable IPI", /* APIC Error Bit 4 */
+ "Send illegal vector", /* APIC Error Bit 5 */
+ "Received illegal vector", /* APIC Error Bit 6 */
+ "Illegal register address", /* APIC Error Bit 7 */
+ };
exit_idle();
irq_enter();
/* First tickle the hardware, only then report what went on. -- REW */
- v = apic_read(APIC_ESR);
+ v0 = apic_read(APIC_ESR);
apic_write(APIC_ESR, 0);
v1 = apic_read(APIC_ESR);
ack_APIC_irq();
atomic_inc(&irq_err_count);
- /*
- * Here is what the APIC error bits mean:
- * 0: Send CS error
- * 1: Receive CS error
- * 2: Send accept error
- * 3: Receive accept error
- * 4: Reserved
- * 5: Send illegal vector
- * 6: Received illegal vector
- * 7: Illegal register address
- */
- pr_debug("APIC error on CPU%d: %02x(%02x)\n",
- smp_processor_id(), v , v1);
+ apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)",
+ smp_processor_id(), v0 , v1);
+
+ v1 = v1 & 0xff;
+ while (v1) {
+ if (v1 & 0x1)
+ apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
+ i++;
+ v1 >>= 1;
+ };
+
+ apic_printk(APIC_DEBUG, KERN_CONT "\n");
+
irq_exit();
}
@@ -2003,21 +2025,6 @@
apic_write(APIC_LDR, val);
}
-#ifdef CONFIG_X86_32
-int default_x86_32_numa_cpu_node(int cpu)
-{
-#ifdef CONFIG_NUMA
- int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
-
- if (apicid != BAD_APICID)
- return __apicid_to_node[apicid];
- return NUMA_NO_NODE;
-#else
- return 0;
-#endif
-}
-#endif
-
/*
* Power management
*/
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index f1baa2d..775b82b 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -119,14 +119,6 @@
WARN_ON_ONCE(cpu_has_apic && !disable_apic);
}
-#ifdef CONFIG_X86_32
-static int noop_x86_32_numa_cpu_node(int cpu)
-{
- /* we're always on node 0 */
- return 0;
-}
-#endif
-
struct apic apic_noop = {
.name = "noop",
.probe = noop_probe,
@@ -195,6 +187,5 @@
#ifdef CONFIG_X86_32
.x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
- .x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node,
#endif
};
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 541a2e4..d84ac5a5 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -253,5 +253,4 @@
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = bigsmp_early_logical_apicid,
- .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 3e9de48..70533de 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -510,11 +510,6 @@
nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
}
-static int es7000_numa_cpu_node(int cpu)
-{
- return 0;
-}
-
static int es7000_cpu_present_to_apicid(int mps_cpu)
{
if (!mps_cpu)
@@ -688,7 +683,6 @@
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
- .x86_32_numa_cpu_node = es7000_numa_cpu_node,
};
struct apic __refdata apic_es7000 = {
@@ -752,5 +746,4 @@
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
- .x86_32_numa_cpu_node = es7000_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 6273eee..30f1331 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -48,8 +48,6 @@
#include <asm/e820.h>
#include <asm/ipi.h>
-#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
-
int found_numaq;
/*
@@ -79,31 +77,20 @@
static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
{
struct eachquadmem *eq = scd->eq + node;
+ u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
+ u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
+ int ret;
- node_set_online(node);
-
- /* Convert to pages */
- node_start_pfn[node] =
- MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
-
- node_end_pfn[node] =
- MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
-
- memblock_x86_register_active_regions(node, node_start_pfn[node],
- node_end_pfn[node]);
-
- memory_present(node, node_start_pfn[node], node_end_pfn[node]);
-
- node_remap_size[node] = node_memmap_size_bytes(node,
- node_start_pfn[node],
- node_end_pfn[node]);
+ node_set(node, numa_nodes_parsed);
+ ret = numa_add_memblk(node, start, end);
+ BUG_ON(ret < 0);
}
/*
* Function: smp_dump_qct()
*
* Description: gets memory layout from the quad config table. This
- * function also updates node_online_map with the nodes (quads) present.
+ * function also updates numa_nodes_parsed with the nodes (quads) present.
*/
static void __init smp_dump_qct(void)
{
@@ -112,7 +99,6 @@
scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
- nodes_clear(node_online_map);
for_each_node(node) {
if (scd->quads_present31_0 & (1 << node))
numaq_register_node(node, scd);
@@ -282,14 +268,14 @@
}
}
-int __init get_memcfg_numaq(void)
+int __init numaq_numa_init(void)
{
early_check_numaq();
if (!found_numaq)
- return 0;
+ return -ENOENT;
smp_dump_qct();
- return 1;
+ return 0;
}
#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index fc84c7b..6541e47 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -172,7 +172,6 @@
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = default_x86_32_early_logical_apicid,
- .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
extern struct apic apic_numaq;
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index e4b8059..35bcd7d 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -551,5 +551,4 @@
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = summit_early_logical_apicid,
- .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 33b10a0..7acd2d2 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -37,6 +37,13 @@
#include <asm/smp.h>
#include <asm/x86_init.h>
#include <asm/emergency-restart.h>
+#include <asm/nmi.h>
+
+/* BMC sets a bit this MMR non-zero before sending an NMI */
+#define UVH_NMI_MMR UVH_SCRATCH5
+#define UVH_NMI_MMR_CLEAR (UVH_NMI_MMR + 8)
+#define UV_NMI_PENDING_MASK (1UL << 63)
+DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count);
DEFINE_PER_CPU(int, x2apic_extra_bits);
@@ -642,18 +649,46 @@
*/
int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data)
{
+ unsigned long real_uv_nmi;
+ int bid;
+
if (reason != DIE_NMIUNKNOWN)
return NOTIFY_OK;
if (in_crash_kexec)
/* do nothing if entering the crash kernel */
return NOTIFY_OK;
+
/*
- * Use a lock so only one cpu prints at a time
- * to prevent intermixed output.
+ * Each blade has an MMR that indicates when an NMI has been sent
+ * to cpus on the blade. If an NMI is detected, atomically
+ * clear the MMR and update a per-blade NMI count used to
+ * cause each cpu on the blade to notice a new NMI.
+ */
+ bid = uv_numa_blade_id();
+ real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
+
+ if (unlikely(real_uv_nmi)) {
+ spin_lock(&uv_blade_info[bid].nmi_lock);
+ real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
+ if (real_uv_nmi) {
+ uv_blade_info[bid].nmi_count++;
+ uv_write_local_mmr(UVH_NMI_MMR_CLEAR, UV_NMI_PENDING_MASK);
+ }
+ spin_unlock(&uv_blade_info[bid].nmi_lock);
+ }
+
+ if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count))
+ return NOTIFY_DONE;
+
+ __get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count;
+
+ /*
+ * Use a lock so only one cpu prints at a time.
+ * This prevents intermixed output.
*/
spin_lock(&uv_nmi_lock);
- pr_info("NMI stack dump cpu %u:\n", smp_processor_id());
+ pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id());
dump_stack();
spin_unlock(&uv_nmi_lock);
@@ -661,7 +696,8 @@
}
static struct notifier_block uv_dump_stack_nmi_nb = {
- .notifier_call = uv_handle_nmi
+ .notifier_call = uv_handle_nmi,
+ .priority = NMI_LOCAL_LOW_PRIOR - 1,
};
void uv_register_nmi_notifier(void)
@@ -720,8 +756,9 @@
printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
- uv_blade_info = kmalloc(bytes, GFP_KERNEL);
+ uv_blade_info = kzalloc(bytes, GFP_KERNEL);
BUG_ON(!uv_blade_info);
+
for (blade = 0; blade < uv_num_possible_blades(); blade++)
uv_blade_info[blade].memory_nid = -1;
@@ -747,6 +784,7 @@
uv_blade_info[blade].pnode = pnode;
uv_blade_info[blade].nr_possible_cpus = 0;
uv_blade_info[blade].nr_online_cpus = 0;
+ spin_lock_init(&uv_blade_info[blade].nmi_lock);
max_pnode = max(pnode, max_pnode);
blade++;
}
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index adee12e..3bfa022 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1238,7 +1238,6 @@
dpm_suspend_noirq(PMSG_SUSPEND);
local_irq_disable();
- sysdev_suspend(PMSG_SUSPEND);
syscore_suspend();
local_irq_enable();
@@ -1258,7 +1257,6 @@
err = (err == APM_SUCCESS) ? 0 : -EIO;
syscore_resume();
- sysdev_resume();
local_irq_enable();
dpm_resume_noirq(PMSG_RESUME);
@@ -1282,7 +1280,6 @@
dpm_suspend_noirq(PMSG_SUSPEND);
local_irq_disable();
- sysdev_suspend(PMSG_SUSPEND);
syscore_suspend();
local_irq_enable();
@@ -1292,7 +1289,6 @@
local_irq_disable();
syscore_resume();
- sysdev_resume();
local_irq_enable();
dpm_resume_noirq(PMSG_RESUME);
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3f0ebe4..6042981 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -30,7 +30,6 @@
obj-$(CONFIG_X86_MCE) += mcheck/
obj-$(CONFIG_MTRR) += mtrr/
-obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 3532d3b..6f9d1f6 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -613,7 +613,7 @@
#endif
/* As a rule processors have APIC timer running in deep C states */
- if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400))
+ if (c->x86 > 0xf && !cpu_has_amd_erratum(amd_erratum_400))
set_cpu_cap(c, X86_FEATURE_ARAT);
/*
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index e2ced00..cbc70a2 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -254,6 +254,25 @@
}
#endif
+static int disable_smep __initdata;
+static __init int setup_disable_smep(char *arg)
+{
+ disable_smep = 1;
+ return 1;
+}
+__setup("nosmep", setup_disable_smep);
+
+static __init void setup_smep(struct cpuinfo_x86 *c)
+{
+ if (cpu_has(c, X86_FEATURE_SMEP)) {
+ if (unlikely(disable_smep)) {
+ setup_clear_cpu_cap(X86_FEATURE_SMEP);
+ clear_in_cr4(X86_CR4_SMEP);
+ } else
+ set_in_cr4(X86_CR4_SMEP);
+ }
+}
+
/*
* Some CPU features depend on higher CPUID levels, which may not always
* be available due to CPUID level capping or broken virtualization
@@ -565,8 +584,7 @@
cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
- if (eax > 0)
- c->x86_capability[9] = ebx;
+ c->x86_capability[9] = ebx;
}
/* AMD-defined flags: level 0x80000001 */
@@ -668,6 +686,8 @@
c->cpu_index = 0;
#endif
filter_cpuid_features(c, false);
+
+ setup_smep(c);
}
void __init early_cpu_init(void)
@@ -753,6 +773,8 @@
#endif
}
+ setup_smep(c);
+
get_model_name(c); /* Default name */
detect_nopl(c);
diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
deleted file mode 100644
index bd54bf6..0000000
--- a/arch/x86/kernel/cpu/cpufreq/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
-# K8 systems. ACPI is preferred to all other hardware-specific drivers.
-# speedstep-* is preferred over p4-clockmod.
-
-obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o
-obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
-obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
-obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
-obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
-obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
-obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
-obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
-obj-$(CONFIG_X86_LONGRUN) += longrun.o
-obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
-obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
-obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
-obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
-obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index df86bc8..1edf5ba 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -29,10 +29,10 @@
static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
{
+ u64 misc_enable;
+
/* Unmask CPUID levels if masked: */
if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
- u64 misc_enable;
-
rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
@@ -118,8 +118,6 @@
* (model 2) with the same problem.
*/
if (c->x86 == 15) {
- u64 misc_enable;
-
rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
if (misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING) {
@@ -130,6 +128,19 @@
}
}
#endif
+
+ /*
+ * If fast string is not enabled in IA32_MISC_ENABLE for any reason,
+ * clear the fast string and enhanced fast string CPU capabilities.
+ */
+ if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
+ rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+ if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) {
+ printk(KERN_INFO "Disabled fast string operations\n");
+ setup_clear_cpu_cap(X86_FEATURE_REP_GOOD);
+ setup_clear_cpu_cap(X86_FEATURE_ERMS);
+ }
+ }
}
#ifdef CONFIG_X86_32
@@ -400,12 +411,10 @@
switch (c->x86_model) {
case 5:
- if (c->x86_mask == 0) {
- if (l2 == 0)
- p = "Celeron (Covington)";
- else if (l2 == 256)
- p = "Mobile Pentium II (Dixon)";
- }
+ if (l2 == 0)
+ p = "Celeron (Covington)";
+ else if (l2 == 256)
+ p = "Mobile Pentium II (Dixon)";
break;
case 6:
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 1ce1af28..c105c53 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -327,7 +327,6 @@
l3->subcaches[2] = sc2 = !(val & BIT(8)) + !(val & BIT(9));
l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13));
- l3->indices = (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1;
l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
}
@@ -454,27 +453,16 @@
{
int ret = 0;
-#define SUBCACHE_MASK (3UL << 20)
-#define SUBCACHE_INDEX 0xfff
-
- /*
- * check whether this slot is already used or
- * the index is already disabled
- */
+ /* check if @slot is already used or the index is already disabled */
ret = amd_get_l3_disable_slot(l3, slot);
if (ret >= 0)
return -EINVAL;
- /*
- * check whether the other slot has disabled the
- * same index already
- */
- if (index == amd_get_l3_disable_slot(l3, !slot))
+ if (index > l3->indices)
return -EINVAL;
- /* do not allow writes outside of allowed bits */
- if ((index & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
- ((index & SUBCACHE_INDEX) > l3->indices))
+ /* check whether the other slot has disabled the same index already */
+ if (index == amd_get_l3_disable_slot(l3, !slot))
return -EINVAL;
amd_l3_disable_index(l3, cpu, slot, index);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 3385ea2..ff1ae9b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -105,20 +105,6 @@
ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
-static int default_decode_mce(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- pr_emerg(HW_ERR "No human readable MCE decoding support on this CPU type.\n");
- pr_emerg(HW_ERR "Run the message through 'mcelog --ascii' to decode.\n");
-
- return NOTIFY_STOP;
-}
-
-static struct notifier_block mce_dec_nb = {
- .notifier_call = default_decode_mce,
- .priority = -1,
-};
-
/* MCA banks polled by the period polling timer for corrected events */
DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
@@ -212,6 +198,8 @@
static void print_mce(struct mce *m)
{
+ int ret = 0;
+
pr_emerg(HW_ERR "CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
m->extcpu, m->mcgstatus, m->bank, m->status);
@@ -239,7 +227,11 @@
* Print out human-readable details about the MCE error,
* (if the CPU has an implementation for that)
*/
- atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
+ ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
+ if (ret == NOTIFY_STOP)
+ return;
+
+ pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -590,7 +582,6 @@
if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
mce_log(&m);
atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
- add_taint(TAINT_MACHINE_CHECK);
}
/*
@@ -1722,8 +1713,6 @@
int __init mcheck_init(void)
{
- atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb);
-
mcheck_intel_therm_init();
return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 167f97b..bb0adad 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -509,6 +509,7 @@
out_free:
if (b) {
kobject_put(&b->kobj);
+ list_del(&b->miscj);
kfree(b);
}
return err;
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 6f8c5e9..27c6251 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -187,8 +187,6 @@
this_cpu,
level == CORE_LEVEL ? "Core" : "Package",
state->count);
-
- add_taint(TAINT_MACHINE_CHECK);
return 1;
}
if (old_event) {
@@ -355,7 +353,6 @@
static void intel_thermal_interrupt(void)
{
__u64 msr_val;
- struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
@@ -367,19 +364,19 @@
CORE_LEVEL) != 0)
mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
- if (cpu_has(c, X86_FEATURE_PLN))
+ if (this_cpu_has(X86_FEATURE_PLN))
if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
CORE_LEVEL) != 0)
mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
- if (cpu_has(c, X86_FEATURE_PTS)) {
+ if (this_cpu_has(X86_FEATURE_PTS)) {
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
THERMAL_THROTTLING_EVENT,
PACKAGE_LEVEL) != 0)
mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
- if (cpu_has(c, X86_FEATURE_PLN))
+ if (this_cpu_has(X86_FEATURE_PLN))
if (therm_throt_process(msr_val &
PACKAGE_THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
@@ -393,7 +390,6 @@
{
printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n",
smp_processor_id());
- add_taint(TAINT_MACHINE_CHECK);
}
static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
@@ -446,18 +442,20 @@
*/
rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ h = lvtthmr_init;
/*
* The initial value of thermal LVT entries on all APs always reads
* 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
* sequence to them and LVT registers are reset to 0s except for
* the mask bits which are set to 1s when APs receive INIT IPI.
- * Always restore the value that BIOS has programmed on AP based on
- * BSP's info we saved since BIOS is always setting the same value
- * for all threads/cores
+ * If BIOS takes over the thermal interrupt and sets its interrupt
+ * delivery mode to SMI (not fixed), it restores the value that the
+ * BIOS has programmed on AP based on BSP's info we saved since BIOS
+ * is always setting the same value for all threads/cores.
*/
- apic_write(APIC_LVTTHMR, lvtthmr_init);
+ if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
+ apic_write(APIC_LVTTHMR, lvtthmr_init);
- h = lvtthmr_init;
if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
printk(KERN_DEBUG
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index e638689..3a0338b 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -31,6 +31,7 @@
#include <asm/nmi.h>
#include <asm/compat.h>
#include <asm/smp.h>
+#include <asm/alternative.h>
#if 0
#undef wrmsrl
@@ -363,12 +364,18 @@
return new_raw_count;
}
-/* using X86_FEATURE_PERFCTR_CORE to later implement ALTERNATIVE() here */
static inline int x86_pmu_addr_offset(int index)
{
- if (boot_cpu_has(X86_FEATURE_PERFCTR_CORE))
- return index << 1;
- return index;
+ int offset;
+
+ /* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */
+ alternative_io(ASM_NOP2,
+ "shll $1, %%eax",
+ X86_FEATURE_PERFCTR_CORE,
+ "=a" (offset),
+ "a" (index));
+
+ return offset;
}
static inline unsigned int x86_pmu_config_addr(int index)
@@ -1766,17 +1773,6 @@
* callchain support
*/
-static void
-backtrace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
- /* Ignore warnings */
-}
-
-static void backtrace_warning(void *data, char *msg)
-{
- /* Ignore warnings */
-}
-
static int backtrace_stack(void *data, char *name)
{
return 0;
@@ -1790,8 +1786,6 @@
}
static const struct stacktrace_ops backtrace_ops = {
- .warning = backtrace_warning,
- .warning_symbol = backtrace_warning_symbol,
.stack = backtrace_stack,
.address = backtrace_address,
.walk_stack = print_context_stack_bp,
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index cf4e369..fe29c1d 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -96,12 +96,14 @@
*/
static const u64 amd_perfmon_event_map[] =
{
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0076,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080,
- [PERF_COUNT_HW_CACHE_MISSES] = 0x0081,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2,
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3,
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0076,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080,
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x0081,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x00d0, /* "Decoder empty" event */
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x00d1, /* "Dispatch stalls" event */
};
static u64 amd_pmu_event_map(int hw_event)
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index e61539b..41178c8 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -36,7 +36,7 @@
[PERF_COUNT_HW_BUS_CYCLES] = 0x013c,
};
-static struct event_constraint intel_core_event_constraints[] =
+static struct event_constraint intel_core_event_constraints[] __read_mostly =
{
INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
@@ -47,7 +47,7 @@
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_core2_event_constraints[] =
+static struct event_constraint intel_core2_event_constraints[] __read_mostly =
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -70,7 +70,7 @@
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_nehalem_event_constraints[] =
+static struct event_constraint intel_nehalem_event_constraints[] __read_mostly =
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -86,19 +86,19 @@
EVENT_CONSTRAINT_END
};
-static struct extra_reg intel_nehalem_extra_regs[] =
+static struct extra_reg intel_nehalem_extra_regs[] __read_mostly =
{
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff),
EVENT_EXTRA_END
};
-static struct event_constraint intel_nehalem_percore_constraints[] =
+static struct event_constraint intel_nehalem_percore_constraints[] __read_mostly =
{
INTEL_EVENT_CONSTRAINT(0xb7, 0),
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_westmere_event_constraints[] =
+static struct event_constraint intel_westmere_event_constraints[] __read_mostly =
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -110,7 +110,7 @@
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_snb_event_constraints[] =
+static struct event_constraint intel_snb_event_constraints[] __read_mostly =
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -123,21 +123,21 @@
EVENT_CONSTRAINT_END
};
-static struct extra_reg intel_westmere_extra_regs[] =
+static struct extra_reg intel_westmere_extra_regs[] __read_mostly =
{
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff),
INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0xffff),
EVENT_EXTRA_END
};
-static struct event_constraint intel_westmere_percore_constraints[] =
+static struct event_constraint intel_westmere_percore_constraints[] __read_mostly =
{
INTEL_EVENT_CONSTRAINT(0xb7, 0),
INTEL_EVENT_CONSTRAINT(0xbb, 0),
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_gen_event_constraints[] =
+static struct event_constraint intel_gen_event_constraints[] __read_mostly =
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -184,26 +184,23 @@
},
},
[ C(LL ) ] = {
- /*
- * TBD: Need Off-core Response Performance Monitoring support
- */
[ C(OP_READ) ] = {
- /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+ /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
[ C(RESULT_ACCESS) ] = 0x01b7,
- /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
- [ C(RESULT_MISS) ] = 0x01bb,
+ /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+ [ C(RESULT_MISS) ] = 0x01b7,
},
[ C(OP_WRITE) ] = {
- /* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */
+ /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
[ C(RESULT_ACCESS) ] = 0x01b7,
- /* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */
- [ C(RESULT_MISS) ] = 0x01bb,
+ /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
+ [ C(RESULT_MISS) ] = 0x01b7,
},
[ C(OP_PREFETCH) ] = {
- /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+ /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
[ C(RESULT_ACCESS) ] = 0x01b7,
- /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
- [ C(RESULT_MISS) ] = 0x01bb,
+ /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+ [ C(RESULT_MISS) ] = 0x01b7,
},
},
[ C(DTLB) ] = {
@@ -285,26 +282,26 @@
},
[ C(LL ) ] = {
[ C(OP_READ) ] = {
- /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+ /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
[ C(RESULT_ACCESS) ] = 0x01b7,
- /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
- [ C(RESULT_MISS) ] = 0x01bb,
+ /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+ [ C(RESULT_MISS) ] = 0x01b7,
},
/*
* Use RFO, not WRITEBACK, because a write miss would typically occur
* on RFO.
*/
[ C(OP_WRITE) ] = {
- /* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */
- [ C(RESULT_ACCESS) ] = 0x01bb,
- /* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */
+ /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
+ [ C(RESULT_ACCESS) ] = 0x01b7,
+ /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
[ C(RESULT_MISS) ] = 0x01b7,
},
[ C(OP_PREFETCH) ] = {
- /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+ /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
[ C(RESULT_ACCESS) ] = 0x01b7,
- /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
- [ C(RESULT_MISS) ] = 0x01bb,
+ /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+ [ C(RESULT_MISS) ] = 0x01b7,
},
},
[ C(DTLB) ] = {
@@ -352,16 +349,36 @@
};
/*
- * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3
+ * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits;
+ * See IA32 SDM Vol 3B 30.6.1.3
*/
-#define DMND_DATA_RD (1 << 0)
-#define DMND_RFO (1 << 1)
-#define DMND_WB (1 << 3)
-#define PF_DATA_RD (1 << 4)
-#define PF_DATA_RFO (1 << 5)
-#define RESP_UNCORE_HIT (1 << 8)
-#define RESP_MISS (0xf600) /* non uncore hit */
+#define NHM_DMND_DATA_RD (1 << 0)
+#define NHM_DMND_RFO (1 << 1)
+#define NHM_DMND_IFETCH (1 << 2)
+#define NHM_DMND_WB (1 << 3)
+#define NHM_PF_DATA_RD (1 << 4)
+#define NHM_PF_DATA_RFO (1 << 5)
+#define NHM_PF_IFETCH (1 << 6)
+#define NHM_OFFCORE_OTHER (1 << 7)
+#define NHM_UNCORE_HIT (1 << 8)
+#define NHM_OTHER_CORE_HIT_SNP (1 << 9)
+#define NHM_OTHER_CORE_HITM (1 << 10)
+ /* reserved */
+#define NHM_REMOTE_CACHE_FWD (1 << 12)
+#define NHM_REMOTE_DRAM (1 << 13)
+#define NHM_LOCAL_DRAM (1 << 14)
+#define NHM_NON_DRAM (1 << 15)
+
+#define NHM_ALL_DRAM (NHM_REMOTE_DRAM|NHM_LOCAL_DRAM)
+
+#define NHM_DMND_READ (NHM_DMND_DATA_RD)
+#define NHM_DMND_WRITE (NHM_DMND_RFO|NHM_DMND_WB)
+#define NHM_DMND_PREFETCH (NHM_PF_DATA_RD|NHM_PF_DATA_RFO)
+
+#define NHM_L3_HIT (NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM)
+#define NHM_L3_MISS (NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD)
+#define NHM_L3_ACCESS (NHM_L3_HIT|NHM_L3_MISS)
static __initconst const u64 nehalem_hw_cache_extra_regs
[PERF_COUNT_HW_CACHE_MAX]
@@ -370,16 +387,16 @@
{
[ C(LL ) ] = {
[ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT,
- [ C(RESULT_MISS) ] = DMND_DATA_RD|RESP_MISS,
+ [ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS,
+ [ C(RESULT_MISS) ] = NHM_DMND_READ|NHM_L3_MISS,
},
[ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT,
- [ C(RESULT_MISS) ] = DMND_RFO|DMND_WB|RESP_MISS,
+ [ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS,
+ [ C(RESULT_MISS) ] = NHM_DMND_WRITE|NHM_L3_MISS,
},
[ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT,
- [ C(RESULT_MISS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS,
+ [ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS,
+ [ C(RESULT_MISS) ] = NHM_DMND_PREFETCH|NHM_L3_MISS,
},
}
};
@@ -1423,6 +1440,11 @@
x86_pmu.enable_all = intel_pmu_nhm_enable_all;
x86_pmu.extra_regs = intel_nehalem_extra_regs;
+ /* UOPS_ISSUED.STALLED_CYCLES */
+ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e;
+ /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */
+ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1;
+
if (ebx & 0x40) {
/*
* Erratum AAJ80 detected, we work it around by using
@@ -1463,6 +1485,12 @@
x86_pmu.enable_all = intel_pmu_nhm_enable_all;
x86_pmu.pebs_constraints = intel_westmere_pebs_event_constraints;
x86_pmu.extra_regs = intel_westmere_extra_regs;
+
+ /* UOPS_ISSUED.STALLED_CYCLES */
+ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e;
+ /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */
+ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1;
+
pr_cont("Westmere events, ");
break;
@@ -1474,6 +1502,12 @@
x86_pmu.event_constraints = intel_snb_event_constraints;
x86_pmu.pebs_constraints = intel_snb_pebs_events;
+
+ /* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */
+ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e;
+ /* UOPS_DISPATCHED.THREAD,c=1,i=1 to count stall cycles*/
+ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x18001b1;
+
pr_cont("SandyBridge events, ");
break;
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index e93fcd5..ead584f 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -468,7 +468,7 @@
.opcode = P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED),
.escr_msr = { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 },
.escr_emask =
- P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS),
+ P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS),
.cntr = { {12, 13, 16}, {14, 15, 17} },
},
[P4_EVENT_X87_ASSIST] = {
@@ -912,8 +912,7 @@
int idx, handled = 0;
u64 val;
- data.addr = 0;
- data.raw = NULL;
+ perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
@@ -1197,7 +1196,7 @@
{
unsigned int low, high;
- /* If we get stripped -- indexig fails */
+ /* If we get stripped -- indexing fails */
BUILD_BUG_ON(ARCH_P4_MAX_CCCR > X86_PMC_MAX_GENERIC);
rdmsr(MSR_IA32_MISC_ENABLE, low, high);
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index e2a3f06..1aae78f 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -135,20 +135,6 @@
}
EXPORT_SYMBOL_GPL(print_context_stack_bp);
-
-static void
-print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
- printk(data);
- print_symbol(msg, symbol);
- printk("\n");
-}
-
-static void print_trace_warning(void *data, char *msg)
-{
- printk("%s%s\n", (char *)data, msg);
-}
-
static int print_trace_stack(void *data, char *name)
{
printk("%s <%s> ", (char *)data, name);
@@ -166,8 +152,6 @@
}
static const struct stacktrace_ops print_trace_ops = {
- .warning = print_trace_warning,
- .warning_symbol = print_trace_warning_symbol,
.stack = print_trace_stack,
.address = print_trace_address,
.walk_stack = print_context_stack,
@@ -279,7 +263,6 @@
printk("DEBUG_PAGEALLOC");
#endif
printk("\n");
- sysfs_printk_last_file();
if (notify_die(DIE_OOPS, str, regs, err,
current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
return 1;
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index a93742a..0ba15a6 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -260,9 +260,9 @@
return mod_code_status;
}
-static unsigned char *ftrace_nop_replace(void)
+static const unsigned char *ftrace_nop_replace(void)
{
- return ideal_nop5;
+ return ideal_nops[NOP_ATOMIC5];
}
static int
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index d6d6bb3..3bb0850 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -23,7 +23,6 @@
static void __init i386_default_early_setup(void)
{
/* Initialize 32bit specific setup functions */
- x86_init.resources.probe_roms = probe_roms;
x86_init.resources.reserve_resources = i386_reserve_resources;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index bfe8f72..6781765 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -217,7 +217,7 @@
/*
* Common hpet info
*/
-static unsigned long hpet_period;
+static unsigned long hpet_freq;
static void hpet_legacy_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
@@ -232,7 +232,6 @@
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = hpet_legacy_set_mode,
.set_next_event = hpet_legacy_next_event,
- .shift = 32,
.irq = 0,
.rating = 50,
};
@@ -290,28 +289,12 @@
hpet_enable_legacy_int();
/*
- * The mult factor is defined as (include/linux/clockchips.h)
- * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
- * hpet_period is in units of femtoseconds (per cycle), so
- * mult/2^shift = cyc/ns = 10^6/hpet_period
- * mult = (10^6 * 2^shift)/hpet_period
- * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
- */
- hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
- hpet_period, hpet_clockevent.shift);
- /* Calculate the min / max delta */
- hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
- &hpet_clockevent);
- /* Setup minimum reprogramming delta. */
- hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
- &hpet_clockevent);
-
- /*
* Start hpet with the boot cpu mask and make it
* global after the IO_APIC has been initialized.
*/
hpet_clockevent.cpumask = cpumask_of(smp_processor_id());
- clockevents_register_device(&hpet_clockevent);
+ clockevents_config_and_register(&hpet_clockevent, hpet_freq,
+ HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
global_clock_event = &hpet_clockevent;
printk(KERN_DEBUG "hpet clockevent registered\n");
}
@@ -549,7 +532,6 @@
static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
{
struct clock_event_device *evt = &hdev->evt;
- uint64_t hpet_freq;
WARN_ON(cpu != smp_processor_id());
if (!(hdev->flags & HPET_DEV_VALID))
@@ -571,24 +553,10 @@
evt->set_mode = hpet_msi_set_mode;
evt->set_next_event = hpet_msi_next_event;
- evt->shift = 32;
-
- /*
- * The period is a femto seconds value. We need to calculate the
- * scaled math multiplication factor for nanosecond to hpet tick
- * conversion.
- */
- hpet_freq = FSEC_PER_SEC;
- do_div(hpet_freq, hpet_period);
- evt->mult = div_sc((unsigned long) hpet_freq,
- NSEC_PER_SEC, evt->shift);
- /* Calculate the max delta */
- evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt);
- /* 5 usec minimum reprogramming delta. */
- evt->min_delta_ns = 5000;
-
evt->cpumask = cpumask_of(hdev->cpu);
- clockevents_register_device(evt);
+
+ clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA,
+ 0x7FFFFFFF);
}
#ifdef CONFIG_HPET
@@ -792,7 +760,6 @@
static int hpet_clocksource_register(void)
{
u64 start, now;
- u64 hpet_freq;
cycle_t t1;
/* Start the counter */
@@ -819,24 +786,7 @@
return -ENODEV;
}
- /*
- * The definition of mult is (include/linux/clocksource.h)
- * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
- * so we first need to convert hpet_period to ns/cyc units:
- * mult/2^shift = ns/cyc = hpet_period/10^6
- * mult = (hpet_period * 2^shift)/10^6
- * mult = (hpet_period << shift)/FSEC_PER_NSEC
- */
-
- /* Need to convert hpet_period (fsec/cyc) to cyc/sec:
- *
- * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc)
- * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period
- */
- hpet_freq = FSEC_PER_SEC;
- do_div(hpet_freq, hpet_period);
clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
-
return 0;
}
@@ -845,7 +795,9 @@
*/
int __init hpet_enable(void)
{
+ unsigned long hpet_period;
unsigned int id;
+ u64 freq;
int i;
if (!is_hpet_capable())
@@ -884,6 +836,14 @@
goto out_nohpet;
/*
+ * The period is a femto seconds value. Convert it to a
+ * frequency.
+ */
+ freq = FSEC_PER_SEC;
+ do_div(freq, hpet_period);
+ hpet_freq = freq;
+
+ /*
* Read the HPET ID register to retrieve the IRQ routing
* information and the number of channels
*/
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 2dfd315..fb66dc9 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -93,7 +93,6 @@
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = init_pit_timer,
.set_next_event = pit_next_event,
- .shift = 32,
.irq = 0,
};
@@ -108,90 +107,12 @@
* IO_APIC has been initialized.
*/
pit_ce.cpumask = cpumask_of(smp_processor_id());
- pit_ce.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, pit_ce.shift);
- pit_ce.max_delta_ns = clockevent_delta2ns(0x7FFF, &pit_ce);
- pit_ce.min_delta_ns = clockevent_delta2ns(0xF, &pit_ce);
- clockevents_register_device(&pit_ce);
+ clockevents_config_and_register(&pit_ce, CLOCK_TICK_RATE, 0xF, 0x7FFF);
global_clock_event = &pit_ce;
}
#ifndef CONFIG_X86_64
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
- static int old_count;
- static u32 old_jifs;
- unsigned long flags;
- int count;
- u32 jifs;
-
- raw_spin_lock_irqsave(&i8253_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- outb_pit(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_pit(PIT_CH0); /* read the latched count */
- count |= inb_pit(PIT_CH0) << 8;
-
- /* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
- outb_pit(0x34, PIT_MODE);
- outb_pit(LATCH & 0xff, PIT_CH0);
- outb_pit(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- /*
- * It's possible for count to appear to go the wrong way for a
- * couple of reasons:
- *
- * 1. The timer counter underflows, but we haven't handled the
- * resulting interrupt and incremented jiffies yet.
- * 2. Hardware problem with the timer, not giving us continuous time,
- * the counter does small "jumps" upwards on some Pentium systems,
- * (see c't 95/10 page 335 for Neptun bug.)
- *
- * Previous attempts to handle these cases intelligently were
- * buggy, so we just do the simple thing now.
- */
- if (count > old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
- count = (LATCH - 1) - count;
-
- return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
-};
-
static int __init init_pit_clocksource(void)
{
/*
@@ -205,10 +126,7 @@
pit_ce.mode != CLOCK_EVT_MODE_PERIODIC)
return 0;
- pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift);
-
- return clocksource_register(&pit_cs);
+ return clocksource_i8253_init();
}
arch_initcall(init_pit_clocksource);
-
#endif /* !CONFIG_X86_64 */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 1cb0b9f..6c0802e 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -249,7 +249,7 @@
data = irq_desc_get_irq_data(desc);
affinity = data->affinity;
- if (!irq_has_action(irq) ||
+ if (!irq_has_action(irq) || irqd_is_per_cpu(data) ||
cpumask_subset(affinity, cpu_online_mask)) {
raw_spin_unlock(&desc->lock);
continue;
@@ -276,7 +276,8 @@
else if (!(warned++))
set_affinity = 0;
- if (!irqd_can_move_in_process_context(data) && chip->irq_unmask)
+ if (!irqd_can_move_in_process_context(data) &&
+ !irqd_irq_disabled(data) && chip->irq_unmask)
chip->irq_unmask(data);
raw_spin_unlock(&desc->lock);
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 961b6b3..3fee346 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -34,7 +34,7 @@
code.offset = entry->target -
(entry->code + JUMP_LABEL_NOP_SIZE);
} else
- memcpy(&code, ideal_nop5, JUMP_LABEL_NOP_SIZE);
+ memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
get_online_cpus();
mutex_lock(&text_mutex);
text_poke_smp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
@@ -44,7 +44,8 @@
void arch_jump_label_text_poke_early(jump_label_t addr)
{
- text_poke_early((void *)addr, ideal_nop5, JUMP_LABEL_NOP_SIZE);
+ text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5],
+ JUMP_LABEL_NOP_SIZE);
}
#endif
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index c969fd9..f1a6244d 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -1183,12 +1183,13 @@
struct pt_regs *regs)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ unsigned long flags;
/* This is possible if op is under delayed unoptimizing */
if (kprobe_disabled(&op->kp))
return;
- preempt_disable();
+ local_irq_save(flags);
if (kprobe_running()) {
kprobes_inc_nmissed_count(&op->kp);
} else {
@@ -1207,7 +1208,7 @@
opt_pre_handler(&op->kp, regs);
__this_cpu_write(current_kprobe, NULL);
}
- preempt_enable_no_resched();
+ local_irq_restore(flags);
}
static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f98d3ea..6389a6b 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -26,8 +26,6 @@
#include <asm/x86_init.h>
#include <asm/reboot.h>
-#define KVM_SCALE 22
-
static int kvmclock = 1;
static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
@@ -120,8 +118,6 @@
.read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1 << KVM_SCALE,
- .shift = KVM_SCALE,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -203,7 +199,7 @@
machine_ops.crash_shutdown = kvm_crash_shutdown;
#endif
kvm_get_preset_lpj();
- clocksource_register(&kvm_clock);
+ clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
pv_info.paravirt_enabled = 1;
pv_info.name = "KVM";
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index ab23f1a..52f256f 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -24,6 +24,7 @@
#include <linux/bug.h>
#include <linux/mm.h>
#include <linux/gfp.h>
+#include <linux/jump_label.h>
#include <asm/system.h>
#include <asm/page.h>
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5a532ce..6f9bfff 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -715,17 +715,15 @@
}
}
-static int
+static int __init
check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
- int ret = 0;
-
if (!mpc_new_phys || count <= mpc_new_length) {
WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
return -1;
}
- return ret;
+ return 0;
}
#else /* CONFIG_X86_IO_APIC */
static
diff --git a/arch/x86/kernel/pci-iommu_table.c b/arch/x86/kernel/pci-iommu_table.c
index 55d745e..35ccf75 100644
--- a/arch/x86/kernel/pci-iommu_table.c
+++ b/arch/x86/kernel/pci-iommu_table.c
@@ -50,20 +50,14 @@
struct iommu_table_entry *finish)
{
struct iommu_table_entry *p, *q, *x;
- char sym_p[KSYM_SYMBOL_LEN];
- char sym_q[KSYM_SYMBOL_LEN];
/* Simple cyclic dependency checker. */
for (p = start; p < finish; p++) {
q = find_dependents_of(start, finish, p);
x = find_dependents_of(start, finish, q);
if (p == x) {
- sprint_symbol(sym_p, (unsigned long)p->detect);
- sprint_symbol(sym_q, (unsigned long)q->detect);
-
- printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %s depends" \
- " on %s and vice-versa. BREAKING IT.\n",
- sym_p, sym_q);
+ printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %pS depends on %pS and vice-versa. BREAKING IT.\n",
+ p->detect, q->detect);
/* Heavy handed way..*/
x->depend = 0;
}
@@ -72,12 +66,8 @@
for (p = start; p < finish; p++) {
q = find_dependents_of(p, finish, p);
if (q && q > p) {
- sprint_symbol(sym_p, (unsigned long)p->detect);
- sprint_symbol(sym_q, (unsigned long)q->detect);
-
- printk(KERN_ERR "EXECUTION ORDER INVALID! %s "\
- "should be called before %s!\n",
- sym_p, sym_q);
+ printk(KERN_ERR "EXECUTION ORDER INVALID! %pS should be called before %pS!\n",
+ p->detect, q->detect);
}
}
}
diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms.c
similarity index 65%
rename from arch/x86/kernel/probe_roms_32.c
rename to arch/x86/kernel/probe_roms.c
index 071e7fe..ba0a4cc 100644
--- a/arch/x86/kernel/probe_roms_32.c
+++ b/arch/x86/kernel/probe_roms.c
@@ -73,6 +73,107 @@
.flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
};
+/* does this oprom support the given pci device, or any of the devices
+ * that the driver supports?
+ */
+static bool match_id(struct pci_dev *pdev, unsigned short vendor, unsigned short device)
+{
+ struct pci_driver *drv = pdev->driver;
+ const struct pci_device_id *id;
+
+ if (pdev->vendor == vendor && pdev->device == device)
+ return true;
+
+ for (id = drv ? drv->id_table : NULL; id && id->vendor; id++)
+ if (id->vendor == vendor && id->device == device)
+ break;
+
+ return id && id->vendor;
+}
+
+static bool probe_list(struct pci_dev *pdev, unsigned short vendor,
+ const unsigned char *rom_list)
+{
+ unsigned short device;
+
+ do {
+ if (probe_kernel_address(rom_list, device) != 0)
+ device = 0;
+
+ if (device && match_id(pdev, vendor, device))
+ break;
+
+ rom_list += 2;
+ } while (device);
+
+ return !!device;
+}
+
+static struct resource *find_oprom(struct pci_dev *pdev)
+{
+ struct resource *oprom = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adapter_rom_resources); i++) {
+ struct resource *res = &adapter_rom_resources[i];
+ unsigned short offset, vendor, device, list, rev;
+ const unsigned char *rom;
+
+ if (res->end == 0)
+ break;
+
+ rom = isa_bus_to_virt(res->start);
+ if (probe_kernel_address(rom + 0x18, offset) != 0)
+ continue;
+
+ if (probe_kernel_address(rom + offset + 0x4, vendor) != 0)
+ continue;
+
+ if (probe_kernel_address(rom + offset + 0x6, device) != 0)
+ continue;
+
+ if (match_id(pdev, vendor, device)) {
+ oprom = res;
+ break;
+ }
+
+ if (probe_kernel_address(rom + offset + 0x8, list) == 0 &&
+ probe_kernel_address(rom + offset + 0xc, rev) == 0 &&
+ rev >= 3 && list &&
+ probe_list(pdev, vendor, rom + offset + list)) {
+ oprom = res;
+ break;
+ }
+ }
+
+ return oprom;
+}
+
+void *pci_map_biosrom(struct pci_dev *pdev)
+{
+ struct resource *oprom = find_oprom(pdev);
+
+ if (!oprom)
+ return NULL;
+
+ return ioremap(oprom->start, resource_size(oprom));
+}
+EXPORT_SYMBOL(pci_map_biosrom);
+
+void pci_unmap_biosrom(void __iomem *image)
+{
+ iounmap(image);
+}
+EXPORT_SYMBOL(pci_unmap_biosrom);
+
+size_t pci_biosrom_size(struct pci_dev *pdev)
+{
+ struct resource *oprom = find_oprom(pdev);
+
+ return oprom ? resource_size(oprom) : 0;
+}
+EXPORT_SYMBOL(pci_biosrom_size);
+
#define ROMSIGNATURE 0xaa55
static int __init romsignature(const unsigned char *rom)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index d46cbe4..88a90a9 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -449,7 +449,7 @@
void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
{
if (!need_resched()) {
- if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
+ if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)¤t_thread_info()->flags);
__monitor((void *)¤t_thread_info()->flags, 0, 0);
@@ -465,7 +465,7 @@
if (!need_resched()) {
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle(1, smp_processor_id());
- if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
+ if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)¤t_thread_info()->flags);
__monitor((void *)¤t_thread_info()->flags, 0, 0);
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 45892dc..f65e5b5 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -608,6 +608,9 @@
unsigned len, type;
struct perf_event *bp;
+ if (ptrace_get_breakpoints(tsk) < 0)
+ return -ESRCH;
+
data &= ~DR_CONTROL_RESERVED;
old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
restore:
@@ -655,6 +658,9 @@
}
goto restore;
}
+
+ ptrace_put_breakpoints(tsk);
+
return ((orig_ret < 0) ? orig_ret : rc);
}
@@ -668,10 +674,17 @@
if (n < HBP_NUM) {
struct perf_event *bp;
+
+ if (ptrace_get_breakpoints(tsk) < 0)
+ return -ESRCH;
+
bp = thread->ptrace_bps[n];
if (!bp)
- return 0;
- val = bp->hw.info.address;
+ val = 0;
+ else
+ val = bp->hw.info.address;
+
+ ptrace_put_breakpoints(tsk);
} else if (n == 6) {
val = thread->debugreg6;
} else if (n == 7) {
@@ -686,6 +699,10 @@
struct perf_event *bp;
struct thread_struct *t = &tsk->thread;
struct perf_event_attr attr;
+ int err = 0;
+
+ if (ptrace_get_breakpoints(tsk) < 0)
+ return -ESRCH;
if (!t->ptrace_bps[nr]) {
ptrace_breakpoint_init(&attr);
@@ -709,24 +726,23 @@
* writing for the user. And anyway this is the previous
* behaviour.
*/
- if (IS_ERR(bp))
- return PTR_ERR(bp);
+ if (IS_ERR(bp)) {
+ err = PTR_ERR(bp);
+ goto put;
+ }
t->ptrace_bps[nr] = bp;
} else {
- int err;
-
bp = t->ptrace_bps[nr];
attr = bp->attr;
attr.bp_addr = addr;
err = modify_user_hw_breakpoint(bp, &attr);
- if (err)
- return err;
}
-
- return 0;
+put:
+ ptrace_put_breakpoints(tsk);
+ return err;
}
/*
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 08c44b0..0c016f7 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -36,7 +36,7 @@
static const struct desc_ptr no_idt = {};
static int reboot_mode;
-enum reboot_type reboot_type = BOOT_KBD;
+enum reboot_type reboot_type = BOOT_ACPI;
int reboot_force;
#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
@@ -478,9 +478,24 @@
{
}
+/*
+ * Windows compatible x86 hardware expects the following on reboot:
+ *
+ * 1) If the FADT has the ACPI reboot register flag set, try it
+ * 2) If still alive, write to the keyboard controller
+ * 3) If still alive, write to the ACPI reboot register again
+ * 4) If still alive, write to the keyboard controller again
+ *
+ * If the machine is still alive at this stage, it gives up. We default to
+ * following the same pattern, except that if we're still alive after (4) we'll
+ * try to force a triple fault and then cycle between hitting the keyboard
+ * controller and doing that
+ */
static void native_machine_emergency_restart(void)
{
int i;
+ int attempt = 0;
+ int orig_reboot_type = reboot_type;
if (reboot_emergency)
emergency_vmx_disable_all();
@@ -502,6 +517,13 @@
outb(0xfe, 0x64); /* pulse reset low */
udelay(50);
}
+ if (attempt == 0 && orig_reboot_type == BOOT_ACPI) {
+ attempt = 1;
+ reboot_type = BOOT_ACPI;
+ } else {
+ reboot_type = BOOT_TRIPLE;
+ }
+ break;
case BOOT_TRIPLE:
load_idt(&no_idt);
diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S
index 29092b3..1d5c46d 100644
--- a/arch/x86/kernel/reboot_32.S
+++ b/arch/x86/kernel/reboot_32.S
@@ -21,26 +21,26 @@
/* Get our own relocated address */
call 1f
1: popl %ebx
- subl $1b, %ebx
+ subl $(1b - r_base), %ebx
/* Compute the equivalent real-mode segment */
movl %ebx, %ecx
shrl $4, %ecx
/* Patch post-real-mode segment jump */
- movw dispatch_table(%ebx,%eax,2),%ax
- movw %ax, 101f(%ebx)
- movw %cx, 102f(%ebx)
+ movw (dispatch_table - r_base)(%ebx,%eax,2),%ax
+ movw %ax, (101f - r_base)(%ebx)
+ movw %cx, (102f - r_base)(%ebx)
/* Set up the IDT for real mode. */
- lidtl machine_real_restart_idt(%ebx)
+ lidtl (machine_real_restart_idt - r_base)(%ebx)
/*
* Set up a GDT from which we can load segment descriptors for real
* mode. The GDT is not used in real mode; it is just needed here to
* prepare the descriptors.
*/
- lgdtl machine_real_restart_gdt(%ebx)
+ lgdtl (machine_real_restart_gdt - r_base)(%ebx)
/*
* Load the data segment registers with 16-bit compatible values
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 4be9b39..c3050af 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -691,8 +691,6 @@
void __init setup_arch(char **cmdline_p)
{
- unsigned long flags;
-
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
visws_early_detect();
@@ -1041,9 +1039,7 @@
mcheck_init();
- local_irq_save(flags);
- arch_init_ideal_nop5();
- local_irq_restore(flags);
+ arch_init_ideal_nops();
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 4fd173c..40a2493 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -601,10 +601,7 @@
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
goto badframe;
@@ -682,6 +679,7 @@
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int ret;
/* Are we from a system call? */
@@ -741,12 +739,10 @@
*/
regs->flags &= ~X86_EFLAGS_TF;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked, sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, sig);
+ set_current_blocked(&blocked);
tracehook_signal_handler(sig, info, ka, regs,
test_thread_flag(TIF_SINGLESTEP));
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 513deac..013e7eb 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -194,14 +194,13 @@
}
/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
+ * Reschedule call back.
*/
void smp_reschedule_interrupt(struct pt_regs *regs)
{
ack_APIC_irq();
inc_irq_stat(irq_resched_count);
+ scheduler_ipi();
/*
* KVM uses this interrupt to force a cpu out of guest mode
*/
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index c2871d3..a3c430b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1332,9 +1332,9 @@
void *mwait_ptr;
struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info);
- if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)))
+ if (!this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c))
return;
- if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH))
+ if (!this_cpu_has(X86_FEATURE_CLFLSH))
return;
if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF)
return;
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 6515733..55d9bc0 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -9,15 +9,6 @@
#include <linux/uaccess.h>
#include <asm/stacktrace.h>
-static void save_stack_warning(void *data, char *msg)
-{
-}
-
-static void
-save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-}
-
static int save_stack_stack(void *data, char *name)
{
return 0;
@@ -53,16 +44,12 @@
}
static const struct stacktrace_ops save_stack_ops = {
- .warning = save_stack_warning,
- .warning_symbol = save_stack_warning_symbol,
.stack = save_stack_stack,
.address = save_stack_address,
.walk_stack = print_context_stack,
};
static const struct stacktrace_ops save_stack_ops_nosched = {
- .warning = save_stack_warning,
- .warning_symbol = save_stack_warning_symbol,
.stack = save_stack_stack,
.address = save_stack_address_nosched,
.walk_stack = print_context_stack,
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index abce34d..32cbffb 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -344,3 +344,4 @@
.long sys_open_by_handle_at
.long sys_clock_adjtime
.long sys_syncfs
+ .long sys_sendmmsg /* 345 */
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index c11514e9..6f164bd 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -35,7 +35,7 @@
struct x86_init_ops x86_init __initdata = {
.resources = {
- .probe_roms = x86_init_noop,
+ .probe_roms = probe_roms,
.reserve_resources = reserve_standard_io_resources,
.memory_setup = default_machine_specific_memory_setup,
},
@@ -61,6 +61,10 @@
.banner = default_banner,
},
+ .mapping = {
+ .pagetable_reserve = native_pagetable_reserve,
+ },
+
.paging = {
.pagetable_setup_start = native_pagetable_setup_start,
.pagetable_setup_done = native_pagetable_setup_done,
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 1cd6089..e191c09 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -7,7 +7,7 @@
* kernel and insert a module (lg.ko) which allows us to run other Linux
* kernels the same way we'd run processes. We call the first kernel the Host,
* and the others the Guests. The program which sets up and configures Guests
- * (such as the example in Documentation/lguest/lguest.c) is called the
+ * (such as the example in Documentation/virtual/lguest/lguest.c) is called the
* Launcher.
*
* Secondly, we only run specially modified Guests, not normal kernels: setting
@@ -913,8 +913,6 @@
.rating = 200,
.read = lguest_clock_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1 << 22,
- .shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -997,7 +995,7 @@
/* Set up the timer interrupt (0) to go to our simple timer routine */
irq_set_handler(0, lguest_time_irq);
- clocksource_register(&lguest_clock);
+ clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index aa4326b..f2145cf 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -1,5 +1,6 @@
#include <linux/linkage.h>
#include <asm/dwarf2.h>
+#include <asm/alternative-asm.h>
/*
* Zero a page.
@@ -14,6 +15,15 @@
CFI_ENDPROC
ENDPROC(clear_page_c)
+ENTRY(clear_page_c_e)
+ CFI_STARTPROC
+ movl $4096,%ecx
+ xorl %eax,%eax
+ rep stosb
+ ret
+ CFI_ENDPROC
+ENDPROC(clear_page_c_e)
+
ENTRY(clear_page)
CFI_STARTPROC
xorl %eax,%eax
@@ -38,21 +48,26 @@
.Lclear_page_end:
ENDPROC(clear_page)
- /* Some CPUs run faster using the string instructions.
- It is also a lot simpler. Use this when possible */
+ /*
+ * Some CPUs support enhanced REP MOVSB/STOSB instructions.
+ * It is recommended to use this when possible.
+ * If enhanced REP MOVSB/STOSB is not available, try to use fast string.
+ * Otherwise, use original function.
+ *
+ */
#include <asm/cpufeature.h>
.section .altinstr_replacement,"ax"
1: .byte 0xeb /* jmp <disp8> */
.byte (clear_page_c - clear_page) - (2f - 1b) /* offset */
-2:
+2: .byte 0xeb /* jmp <disp8> */
+ .byte (clear_page_c_e - clear_page) - (3f - 2b) /* offset */
+3:
.previous
.section .altinstructions,"a"
- .align 8
- .quad clear_page
- .quad 1b
- .word X86_FEATURE_REP_GOOD
- .byte .Lclear_page_end - clear_page
- .byte 2b - 1b
+ altinstruction_entry clear_page,1b,X86_FEATURE_REP_GOOD,\
+ .Lclear_page_end-clear_page, 2b-1b
+ altinstruction_entry clear_page,2b,X86_FEATURE_ERMS, \
+ .Lclear_page_end-clear_page,3b-2b
.previous
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 99e4826..0248402 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -15,23 +15,30 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
- .macro ALTERNATIVE_JUMP feature,orig,alt
+/*
+ * By placing feature2 after feature1 in altinstructions section, we logically
+ * implement:
+ * If CPU has feature2, jmp to alt2 is used
+ * else if CPU has feature1, jmp to alt1 is used
+ * else jmp to orig is used.
+ */
+ .macro ALTERNATIVE_JUMP feature1,feature2,orig,alt1,alt2
0:
.byte 0xe9 /* 32bit jump */
.long \orig-1f /* by default jump to orig */
1:
.section .altinstr_replacement,"ax"
2: .byte 0xe9 /* near jump with 32bit immediate */
- .long \alt-1b /* offset */ /* or alternatively to alt */
+ .long \alt1-1b /* offset */ /* or alternatively to alt1 */
+3: .byte 0xe9 /* near jump with 32bit immediate */
+ .long \alt2-1b /* offset */ /* or alternatively to alt2 */
.previous
+
.section .altinstructions,"a"
- .align 8
- .quad 0b
- .quad 2b
- .word \feature /* when feature is set */
- .byte 5
- .byte 5
+ altinstruction_entry 0b,2b,\feature1,5,5
+ altinstruction_entry 0b,3b,\feature2,5,5
.previous
.endm
@@ -72,8 +79,10 @@
addq %rdx,%rcx
jc bad_to_user
cmpq TI_addr_limit(%rax),%rcx
- jae bad_to_user
- ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ ja bad_to_user
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS, \
+ copy_user_generic_unrolled,copy_user_generic_string, \
+ copy_user_enhanced_fast_string
CFI_ENDPROC
ENDPROC(_copy_to_user)
@@ -85,8 +94,10 @@
addq %rdx,%rcx
jc bad_from_user
cmpq TI_addr_limit(%rax),%rcx
- jae bad_from_user
- ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ ja bad_from_user
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS, \
+ copy_user_generic_unrolled,copy_user_generic_string, \
+ copy_user_enhanced_fast_string
CFI_ENDPROC
ENDPROC(_copy_from_user)
@@ -255,3 +266,37 @@
.previous
CFI_ENDPROC
ENDPROC(copy_user_generic_string)
+
+/*
+ * Some CPUs are adding enhanced REP MOVSB/STOSB instructions.
+ * It's recommended to use enhanced REP MOVSB/STOSB if it's enabled.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successful.
+ */
+ENTRY(copy_user_enhanced_fast_string)
+ CFI_STARTPROC
+ andl %edx,%edx
+ jz 2f
+ movl %edx,%ecx
+1: rep
+ movsb
+2: xorl %eax,%eax
+ ret
+
+ .section .fixup,"ax"
+12: movl %ecx,%edx /* ecx is zerorest also */
+ jmp copy_user_handle_tail
+ .previous
+
+ .section __ex_table,"a"
+ .align 8
+ .quad 1b,12b
+ .previous
+ CFI_ENDPROC
+ENDPROC(copy_user_enhanced_fast_string)
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 75ef61e..efbf2a0 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -4,6 +4,7 @@
#include <asm/cpufeature.h>
#include <asm/dwarf2.h>
+#include <asm/alternative-asm.h>
/*
* memcpy - Copy a memory block.
@@ -37,6 +38,23 @@
.Lmemcpy_e:
.previous
+/*
+ * memcpy_c_e() - enhanced fast string memcpy. This is faster and simpler than
+ * memcpy_c. Use memcpy_c_e when possible.
+ *
+ * This gets patched over the unrolled variant (below) via the
+ * alternative instructions framework:
+ */
+ .section .altinstr_replacement, "ax", @progbits
+.Lmemcpy_c_e:
+ movq %rdi, %rax
+
+ movl %edx, %ecx
+ rep movsb
+ ret
+.Lmemcpy_e_e:
+ .previous
+
ENTRY(__memcpy)
ENTRY(memcpy)
CFI_STARTPROC
@@ -49,7 +67,7 @@
jb .Lhandle_tail
/*
- * We check whether memory false dependece could occur,
+ * We check whether memory false dependence could occur,
* then jump to corresponding copy mode.
*/
cmp %dil, %sil
@@ -171,21 +189,22 @@
ENDPROC(__memcpy)
/*
- * Some CPUs run faster using the string copy instructions.
- * It is also a lot simpler. Use this when possible:
- */
-
- .section .altinstructions, "a"
- .align 8
- .quad memcpy
- .quad .Lmemcpy_c
- .word X86_FEATURE_REP_GOOD
-
- /*
+ * Some CPUs are adding enhanced REP MOVSB/STOSB feature
+ * If the feature is supported, memcpy_c_e() is the first choice.
+ * If enhanced rep movsb copy is not available, use fast string copy
+ * memcpy_c() when possible. This is faster and code is simpler than
+ * original memcpy().
+ * Otherwise, original memcpy() is used.
+ * In .altinstructions section, ERMS feature is placed after REG_GOOD
+ * feature to implement the right patch order.
+ *
* Replace only beginning, memcpy is used to apply alternatives,
* so it is silly to overwrite itself with nops - reboot is the
* only outcome...
*/
- .byte .Lmemcpy_e - .Lmemcpy_c
- .byte .Lmemcpy_e - .Lmemcpy_c
+ .section .altinstructions, "a"
+ altinstruction_entry memcpy,.Lmemcpy_c,X86_FEATURE_REP_GOOD,\
+ .Lmemcpy_e-.Lmemcpy_c,.Lmemcpy_e-.Lmemcpy_c
+ altinstruction_entry memcpy,.Lmemcpy_c_e,X86_FEATURE_ERMS, \
+ .Lmemcpy_e_e-.Lmemcpy_c_e,.Lmemcpy_e_e-.Lmemcpy_c_e
.previous
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 0ecb843..d0ec9c2 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -8,6 +8,7 @@
#define _STRING_C
#include <linux/linkage.h>
#include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
#undef memmove
@@ -24,6 +25,7 @@
*/
ENTRY(memmove)
CFI_STARTPROC
+
/* Handle more 32bytes in loop */
mov %rdi, %rax
cmp $0x20, %rdx
@@ -31,8 +33,13 @@
/* Decide forward/backward copy mode */
cmp %rdi, %rsi
- jb 2f
+ jge .Lmemmove_begin_forward
+ mov %rsi, %r8
+ add %rdx, %r8
+ cmp %rdi, %r8
+ jg 2f
+.Lmemmove_begin_forward:
/*
* movsq instruction have many startup latency
* so we handle small size by general register.
@@ -78,6 +85,8 @@
rep movsq
movq %r11, (%r10)
jmp 13f
+.Lmemmove_end_forward:
+
/*
* Handle data backward by movsq.
*/
@@ -194,4 +203,22 @@
13:
retq
CFI_ENDPROC
+
+ .section .altinstr_replacement,"ax"
+.Lmemmove_begin_forward_efs:
+ /* Forward moving data. */
+ movq %rdx, %rcx
+ rep movsb
+ retq
+.Lmemmove_end_forward_efs:
+ .previous
+
+ .section .altinstructions,"a"
+ .align 8
+ .quad .Lmemmove_begin_forward
+ .quad .Lmemmove_begin_forward_efs
+ .word X86_FEATURE_ERMS
+ .byte .Lmemmove_end_forward-.Lmemmove_begin_forward
+ .byte .Lmemmove_end_forward_efs-.Lmemmove_begin_forward_efs
+ .previous
ENDPROC(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 09d3442..79bd454 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -2,9 +2,13 @@
#include <linux/linkage.h>
#include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
/*
- * ISO C memset - set a memory block to a byte value.
+ * ISO C memset - set a memory block to a byte value. This function uses fast
+ * string to get better performance than the original function. The code is
+ * simpler and shorter than the orignal function as well.
*
* rdi destination
* rsi value (char)
@@ -31,6 +35,28 @@
.Lmemset_e:
.previous
+/*
+ * ISO C memset - set a memory block to a byte value. This function uses
+ * enhanced rep stosb to override the fast string function.
+ * The code is simpler and shorter than the fast string function as well.
+ *
+ * rdi destination
+ * rsi value (char)
+ * rdx count (bytes)
+ *
+ * rax original destination
+ */
+ .section .altinstr_replacement, "ax", @progbits
+.Lmemset_c_e:
+ movq %rdi,%r9
+ movb %sil,%al
+ movl %edx,%ecx
+ rep stosb
+ movq %r9,%rax
+ ret
+.Lmemset_e_e:
+ .previous
+
ENTRY(memset)
ENTRY(__memset)
CFI_STARTPROC
@@ -112,16 +138,20 @@
ENDPROC(memset)
ENDPROC(__memset)
- /* Some CPUs run faster using the string instructions.
- It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>
-
+ /* Some CPUs support enhanced REP MOVSB/STOSB feature.
+ * It is recommended to use this when possible.
+ *
+ * If enhanced REP MOVSB/STOSB feature is not available, use fast string
+ * instructions.
+ *
+ * Otherwise, use original memset function.
+ *
+ * In .altinstructions section, ERMS feature is placed after REG_GOOD
+ * feature to implement the right patch order.
+ */
.section .altinstructions,"a"
- .align 8
- .quad memset
- .quad .Lmemset_c
- .word X86_FEATURE_REP_GOOD
- .byte .Lfinal - memset
- .byte .Lmemset_e - .Lmemset_c
+ altinstruction_entry memset,.Lmemset_c,X86_FEATURE_REP_GOOD,\
+ .Lfinal-memset,.Lmemset_e-.Lmemset_c
+ altinstruction_entry memset,.Lmemset_c_e,X86_FEATURE_ERMS, \
+ .Lfinal-memset,.Lmemset_e_e-.Lmemset_c_e
.previous
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 3e608ed..3d11327 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -23,8 +23,8 @@
obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o
obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o
-obj-$(CONFIG_AMD_NUMA) += amdtopology_64.o
-obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o
+obj-$(CONFIG_AMD_NUMA) += amdtopology.o
+obj-$(CONFIG_ACPI_NUMA) += srat.o
obj-$(CONFIG_NUMA_EMU) += numa_emulation.o
obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology.c
similarity index 89%
rename from arch/x86/mm/amdtopology_64.c
rename to arch/x86/mm/amdtopology.c
index 0919c26..5247d01 100644
--- a/arch/x86/mm/amdtopology_64.c
+++ b/arch/x86/mm/amdtopology.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
+#include <linux/bootmem.h>
#include <asm/io.h>
#include <linux/pci_ids.h>
@@ -69,10 +70,10 @@
int __init amd_numa_init(void)
{
- unsigned long start = PFN_PHYS(0);
- unsigned long end = PFN_PHYS(max_pfn);
+ u64 start = PFN_PHYS(0);
+ u64 end = PFN_PHYS(max_pfn);
unsigned numnodes;
- unsigned long prevbase;
+ u64 prevbase;
int i, j, nb;
u32 nodeid, reg;
unsigned int bits, cores, apicid_base;
@@ -95,7 +96,7 @@
prevbase = 0;
for (i = 0; i < 8; i++) {
- unsigned long base, limit;
+ u64 base, limit;
base = read_pci_config(0, nb, 1, 0x40 + i*8);
limit = read_pci_config(0, nb, 1, 0x44 + i*8);
@@ -107,18 +108,18 @@
continue;
}
if (nodeid >= numnodes) {
- pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid,
+ pr_info("Ignoring excess node %d (%Lx:%Lx)\n", nodeid,
base, limit);
continue;
}
if (!limit) {
- pr_info("Skipping node entry %d (base %lx)\n",
+ pr_info("Skipping node entry %d (base %Lx)\n",
i, base);
continue;
}
if ((base >> 8) & 3 || (limit >> 8) & 3) {
- pr_err("Node %d using interleaving mode %lx/%lx\n",
+ pr_err("Node %d using interleaving mode %Lx/%Lx\n",
nodeid, (base >> 8) & 3, (limit >> 8) & 3);
return -EINVAL;
}
@@ -150,19 +151,19 @@
continue;
}
if (limit < base) {
- pr_err("Node %d bogus settings %lx-%lx.\n",
+ pr_err("Node %d bogus settings %Lx-%Lx.\n",
nodeid, base, limit);
continue;
}
/* Could sort here, but pun for now. Should not happen anyroads. */
if (prevbase > base) {
- pr_err("Node map not sorted %lx,%lx\n",
+ pr_err("Node map not sorted %Lx,%Lx\n",
prevbase, base);
return -EINVAL;
}
- pr_info("Node %d MemBase %016lx Limit %016lx\n",
+ pr_info("Node %d MemBase %016Lx Limit %016Lx\n",
nodeid, base, limit);
prevbase = base;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 20e3f87..bcb394d 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -12,6 +12,7 @@
#include <linux/mmiotrace.h> /* kmmio_handler, ... */
#include <linux/perf_event.h> /* perf_sw_event */
#include <linux/hugetlb.h> /* hstate_index_to_shift */
+#include <linux/prefetch.h> /* prefetchw */
#include <asm/traps.h> /* dotraplinkage, ... */
#include <asm/pgalloc.h> /* pgd_*(), ... */
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 286d289..37b8b0f 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -81,6 +81,11 @@
end, pgt_buf_start << PAGE_SHIFT, pgt_buf_top << PAGE_SHIFT);
}
+void __init native_pagetable_reserve(u64 start, u64 end)
+{
+ memblock_x86_reserve_range(start, end, "PGTABLE");
+}
+
struct map_range {
unsigned long start;
unsigned long end;
@@ -272,9 +277,24 @@
__flush_tlb_all();
+ /*
+ * Reserve the kernel pagetable pages we used (pgt_buf_start -
+ * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top)
+ * so that they can be reused for other purposes.
+ *
+ * On native it just means calling memblock_x86_reserve_range, on Xen it
+ * also means marking RW the pagetable pages that we allocated before
+ * but that haven't been used.
+ *
+ * In fact on xen we mark RO the whole range pgt_buf_start -
+ * pgt_buf_top, because we have to make sure that when
+ * init_memory_mapping reaches the pagetable pages area, it maps
+ * RO all the pagetable pages, including the ones that are beyond
+ * pgt_buf_end at that time.
+ */
if (!after_bootmem && pgt_buf_end > pgt_buf_start)
- memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT,
- pgt_buf_end << PAGE_SHIFT, "PGTABLE");
+ x86_init.mapping.pagetable_reserve(PFN_PHYS(pgt_buf_start),
+ PFN_PHYS(pgt_buf_end));
if (!after_bootmem)
early_memtest(start, end);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 80088f9..29f7c6d9 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -678,8 +678,10 @@
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] =
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
@@ -716,6 +718,7 @@
* NOTE: at this point the bootmem allocator is fully available.
*/
olpc_dt_build_devicetree();
+ sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
zone_sizes_init();
}
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 7942335..d865c4ae 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -616,7 +616,9 @@
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
+#endif
max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
@@ -679,14 +681,6 @@
}
EXPORT_SYMBOL_GPL(arch_add_memory);
-#if !defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA)
-int memory_add_physaddr_to_nid(u64 start)
-{
- return 0;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
#endif /* CONFIG_MEMORY_HOTPLUG */
static struct kcore_list kcore_vsyscall;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 0369843..be1ef57 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -91,13 +91,6 @@
return (__force void __iomem *)phys_to_virt(phys_addr);
/*
- * Check if the request spans more than any BAR in the iomem resource
- * tree.
- */
- WARN_ONCE(iomem_map_sanity_check(phys_addr, size),
- KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
-
- /*
* Don't allow anybody to remap normal RAM that we're using..
*/
last_pfn = last_addr >> PAGE_SHIFT;
@@ -170,6 +163,13 @@
ret_addr = (void __iomem *) (vaddr + offset);
mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr);
+ /*
+ * Check if the request spans more than any BAR in the iomem resource
+ * tree.
+ */
+ WARN_ONCE(iomem_map_sanity_check(unaligned_phys_addr, unaligned_size),
+ KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
+
return ret_addr;
err_free_area:
free_vm_area(area);
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 745258d..f5510d8 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -1,11 +1,39 @@
/* Common code for 32 and 64-bit NUMA */
-#include <linux/topology.h>
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/init.h>
#include <linux/bootmem.h>
-#include <asm/numa.h>
+#include <linux/memblock.h>
+#include <linux/mmzone.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <linux/sched.h>
+#include <linux/topology.h>
+
+#include <asm/e820.h>
+#include <asm/proto.h>
+#include <asm/dma.h>
#include <asm/acpi.h>
+#include <asm/amd_nb.h>
+
+#include "numa_internal.h"
int __initdata numa_off;
+nodemask_t numa_nodes_parsed __initdata;
+
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+
+static struct numa_meminfo numa_meminfo
+#ifndef CONFIG_MEMORY_HOTPLUG
+__initdata
+#endif
+;
+
+static int numa_distance_cnt;
+static u8 *numa_distance;
static __init int numa_setup(char *opt)
{
@@ -32,6 +60,15 @@
[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
};
+int __cpuinit numa_cpu_node(int cpu)
+{
+ int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+ if (apicid != BAD_APICID)
+ return __apicid_to_node[apicid];
+ return NUMA_NO_NODE;
+}
+
cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
EXPORT_SYMBOL(node_to_cpumask_map);
@@ -95,6 +132,407 @@
pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids);
}
+static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
+ struct numa_meminfo *mi)
+{
+ /* ignore zero length blks */
+ if (start == end)
+ return 0;
+
+ /* whine about and ignore invalid blks */
+ if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
+ pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n",
+ nid, start, end);
+ return 0;
+ }
+
+ if (mi->nr_blks >= NR_NODE_MEMBLKS) {
+ pr_err("NUMA: too many memblk ranges\n");
+ return -EINVAL;
+ }
+
+ mi->blk[mi->nr_blks].start = start;
+ mi->blk[mi->nr_blks].end = end;
+ mi->blk[mi->nr_blks].nid = nid;
+ mi->nr_blks++;
+ return 0;
+}
+
+/**
+ * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
+ * @idx: Index of memblk to remove
+ * @mi: numa_meminfo to remove memblk from
+ *
+ * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
+ * decrementing @mi->nr_blks.
+ */
+void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
+{
+ mi->nr_blks--;
+ memmove(&mi->blk[idx], &mi->blk[idx + 1],
+ (mi->nr_blks - idx) * sizeof(mi->blk[0]));
+}
+
+/**
+ * numa_add_memblk - Add one numa_memblk to numa_meminfo
+ * @nid: NUMA node ID of the new memblk
+ * @start: Start address of the new memblk
+ * @end: End address of the new memblk
+ *
+ * Add a new memblk to the default numa_meminfo.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_add_memblk(int nid, u64 start, u64 end)
+{
+ return numa_add_memblk_to(nid, start, end, &numa_meminfo);
+}
+
+/* Initialize NODE_DATA for a node on the local memory */
+static void __init setup_node_data(int nid, u64 start, u64 end)
+{
+ const u64 nd_low = PFN_PHYS(MAX_DMA_PFN);
+ const u64 nd_high = PFN_PHYS(max_pfn_mapped);
+ const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
+ bool remapped = false;
+ u64 nd_pa;
+ void *nd;
+ int tnid;
+
+ /*
+ * Don't confuse VM with a node that doesn't have the
+ * minimum amount of memory:
+ */
+ if (end && (end - start) < NODE_MIN_SIZE)
+ return;
+
+ /* initialize remap allocator before aligning to ZONE_ALIGN */
+ init_alloc_remap(nid, start, end);
+
+ start = roundup(start, ZONE_ALIGN);
+
+ printk(KERN_INFO "Initmem setup node %d %016Lx-%016Lx\n",
+ nid, start, end);
+
+ /*
+ * Allocate node data. Try remap allocator first, node-local
+ * memory and then any node. Never allocate in DMA zone.
+ */
+ nd = alloc_remap(nid, nd_size);
+ if (nd) {
+ nd_pa = __pa(nd);
+ remapped = true;
+ } else {
+ nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high,
+ nd_size, SMP_CACHE_BYTES);
+ if (nd_pa == MEMBLOCK_ERROR)
+ nd_pa = memblock_find_in_range(nd_low, nd_high,
+ nd_size, SMP_CACHE_BYTES);
+ if (nd_pa == MEMBLOCK_ERROR) {
+ pr_err("Cannot find %zu bytes in node %d\n",
+ nd_size, nid);
+ return;
+ }
+ memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA");
+ nd = __va(nd_pa);
+ }
+
+ /* report and initialize */
+ printk(KERN_INFO " NODE_DATA [%016Lx - %016Lx]%s\n",
+ nd_pa, nd_pa + nd_size - 1, remapped ? " (remapped)" : "");
+ tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
+ if (!remapped && tnid != nid)
+ printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nid, tnid);
+
+ node_data[nid] = nd;
+ memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
+ NODE_DATA(nid)->node_id = nid;
+ NODE_DATA(nid)->node_start_pfn = start >> PAGE_SHIFT;
+ NODE_DATA(nid)->node_spanned_pages = (end - start) >> PAGE_SHIFT;
+
+ node_set_online(nid);
+}
+
+/**
+ * numa_cleanup_meminfo - Cleanup a numa_meminfo
+ * @mi: numa_meminfo to clean up
+ *
+ * Sanitize @mi by merging and removing unncessary memblks. Also check for
+ * conflicts and clear unused memblks.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
+{
+ const u64 low = 0;
+ const u64 high = PFN_PHYS(max_pfn);
+ int i, j, k;
+
+ /* first, trim all entries */
+ for (i = 0; i < mi->nr_blks; i++) {
+ struct numa_memblk *bi = &mi->blk[i];
+
+ /* make sure all blocks are inside the limits */
+ bi->start = max(bi->start, low);
+ bi->end = min(bi->end, high);
+
+ /* and there's no empty block */
+ if (bi->start >= bi->end)
+ numa_remove_memblk_from(i--, mi);
+ }
+
+ /* merge neighboring / overlapping entries */
+ for (i = 0; i < mi->nr_blks; i++) {
+ struct numa_memblk *bi = &mi->blk[i];
+
+ for (j = i + 1; j < mi->nr_blks; j++) {
+ struct numa_memblk *bj = &mi->blk[j];
+ u64 start, end;
+
+ /*
+ * See whether there are overlapping blocks. Whine
+ * about but allow overlaps of the same nid. They
+ * will be merged below.
+ */
+ if (bi->end > bj->start && bi->start < bj->end) {
+ if (bi->nid != bj->nid) {
+ pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n",
+ bi->nid, bi->start, bi->end,
+ bj->nid, bj->start, bj->end);
+ return -EINVAL;
+ }
+ pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n",
+ bi->nid, bi->start, bi->end,
+ bj->start, bj->end);
+ }
+
+ /*
+ * Join together blocks on the same node, holes
+ * between which don't overlap with memory on other
+ * nodes.
+ */
+ if (bi->nid != bj->nid)
+ continue;
+ start = min(bi->start, bj->start);
+ end = max(bi->end, bj->end);
+ for (k = 0; k < mi->nr_blks; k++) {
+ struct numa_memblk *bk = &mi->blk[k];
+
+ if (bi->nid == bk->nid)
+ continue;
+ if (start < bk->end && end > bk->start)
+ break;
+ }
+ if (k < mi->nr_blks)
+ continue;
+ printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%Lx,%Lx)\n",
+ bi->nid, bi->start, bi->end, bj->start, bj->end,
+ start, end);
+ bi->start = start;
+ bi->end = end;
+ numa_remove_memblk_from(j--, mi);
+ }
+ }
+
+ /* clear unused ones */
+ for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
+ mi->blk[i].start = mi->blk[i].end = 0;
+ mi->blk[i].nid = NUMA_NO_NODE;
+ }
+
+ return 0;
+}
+
+/*
+ * Set nodes, which have memory in @mi, in *@nodemask.
+ */
+static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
+ const struct numa_meminfo *mi)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
+ if (mi->blk[i].start != mi->blk[i].end &&
+ mi->blk[i].nid != NUMA_NO_NODE)
+ node_set(mi->blk[i].nid, *nodemask);
+}
+
+/**
+ * numa_reset_distance - Reset NUMA distance table
+ *
+ * The current table is freed. The next numa_set_distance() call will
+ * create a new one.
+ */
+void __init numa_reset_distance(void)
+{
+ size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
+
+ /* numa_distance could be 1LU marking allocation failure, test cnt */
+ if (numa_distance_cnt)
+ memblock_x86_free_range(__pa(numa_distance),
+ __pa(numa_distance) + size);
+ numa_distance_cnt = 0;
+ numa_distance = NULL; /* enable table creation */
+}
+
+static int __init numa_alloc_distance(void)
+{
+ nodemask_t nodes_parsed;
+ size_t size;
+ int i, j, cnt = 0;
+ u64 phys;
+
+ /* size the new table and allocate it */
+ nodes_parsed = numa_nodes_parsed;
+ numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
+
+ for_each_node_mask(i, nodes_parsed)
+ cnt = i;
+ cnt++;
+ size = cnt * cnt * sizeof(numa_distance[0]);
+
+ phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
+ size, PAGE_SIZE);
+ if (phys == MEMBLOCK_ERROR) {
+ pr_warning("NUMA: Warning: can't allocate distance table!\n");
+ /* don't retry until explicitly reset */
+ numa_distance = (void *)1LU;
+ return -ENOMEM;
+ }
+ memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
+
+ numa_distance = __va(phys);
+ numa_distance_cnt = cnt;
+
+ /* fill with the default distances */
+ for (i = 0; i < cnt; i++)
+ for (j = 0; j < cnt; j++)
+ numa_distance[i * cnt + j] = i == j ?
+ LOCAL_DISTANCE : REMOTE_DISTANCE;
+ printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
+
+ return 0;
+}
+
+/**
+ * numa_set_distance - Set NUMA distance from one NUMA to another
+ * @from: the 'from' node to set distance
+ * @to: the 'to' node to set distance
+ * @distance: NUMA distance
+ *
+ * Set the distance from node @from to @to to @distance. If distance table
+ * doesn't exist, one which is large enough to accommodate all the currently
+ * known nodes will be created.
+ *
+ * If such table cannot be allocated, a warning is printed and further
+ * calls are ignored until the distance table is reset with
+ * numa_reset_distance().
+ *
+ * If @from or @to is higher than the highest known node at the time of
+ * table creation or @distance doesn't make sense, the call is ignored.
+ * This is to allow simplification of specific NUMA config implementations.
+ */
+void __init numa_set_distance(int from, int to, int distance)
+{
+ if (!numa_distance && numa_alloc_distance() < 0)
+ return;
+
+ if (from >= numa_distance_cnt || to >= numa_distance_cnt) {
+ printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n",
+ from, to, distance);
+ return;
+ }
+
+ if ((u8)distance != distance ||
+ (from == to && distance != LOCAL_DISTANCE)) {
+ pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+ from, to, distance);
+ return;
+ }
+
+ numa_distance[from * numa_distance_cnt + to] = distance;
+}
+
+int __node_distance(int from, int to)
+{
+ if (from >= numa_distance_cnt || to >= numa_distance_cnt)
+ return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
+ return numa_distance[from * numa_distance_cnt + to];
+}
+EXPORT_SYMBOL(__node_distance);
+
+/*
+ * Sanity check to catch more bad NUMA configurations (they are amazingly
+ * common). Make sure the nodes cover all memory.
+ */
+static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
+{
+ u64 numaram, e820ram;
+ int i;
+
+ numaram = 0;
+ for (i = 0; i < mi->nr_blks; i++) {
+ u64 s = mi->blk[i].start >> PAGE_SHIFT;
+ u64 e = mi->blk[i].end >> PAGE_SHIFT;
+ numaram += e - s;
+ numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
+ if ((s64)numaram < 0)
+ numaram = 0;
+ }
+
+ e820ram = max_pfn - (memblock_x86_hole_size(0,
+ PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
+ /* We seem to lose 3 pages somewhere. Allow 1M of slack. */
+ if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
+ printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
+ (numaram << PAGE_SHIFT) >> 20,
+ (e820ram << PAGE_SHIFT) >> 20);
+ return false;
+ }
+ return true;
+}
+
+static int __init numa_register_memblks(struct numa_meminfo *mi)
+{
+ int i, nid;
+
+ /* Account for nodes with cpus and no memory */
+ node_possible_map = numa_nodes_parsed;
+ numa_nodemask_from_meminfo(&node_possible_map, mi);
+ if (WARN_ON(nodes_empty(node_possible_map)))
+ return -EINVAL;
+
+ for (i = 0; i < mi->nr_blks; i++)
+ memblock_x86_register_active_regions(mi->blk[i].nid,
+ mi->blk[i].start >> PAGE_SHIFT,
+ mi->blk[i].end >> PAGE_SHIFT);
+
+ /* for out of order entries */
+ sort_node_map();
+ if (!numa_meminfo_cover_memory(mi))
+ return -EINVAL;
+
+ /* Finally register nodes. */
+ for_each_node_mask(nid, node_possible_map) {
+ u64 start = PFN_PHYS(max_pfn);
+ u64 end = 0;
+
+ for (i = 0; i < mi->nr_blks; i++) {
+ if (nid != mi->blk[i].nid)
+ continue;
+ start = min(mi->blk[i].start, start);
+ end = max(mi->blk[i].end, end);
+ }
+
+ if (start < end)
+ setup_node_data(nid, start, end);
+ }
+
+ return 0;
+}
+
/*
* There are unfortunately some poorly designed mainboards around that
* only connect memory to a single CPU. This breaks the 1:1 cpu->node
@@ -102,7 +540,7 @@
* as the number of CPUs is not known yet. We round robin the existing
* nodes.
*/
-void __init numa_init_array(void)
+static void __init numa_init_array(void)
{
int rr, i;
@@ -117,6 +555,95 @@
}
}
+static int __init numa_init(int (*init_func)(void))
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < MAX_LOCAL_APIC; i++)
+ set_apicid_to_node(i, NUMA_NO_NODE);
+
+ nodes_clear(numa_nodes_parsed);
+ nodes_clear(node_possible_map);
+ nodes_clear(node_online_map);
+ memset(&numa_meminfo, 0, sizeof(numa_meminfo));
+ remove_all_active_ranges();
+ numa_reset_distance();
+
+ ret = init_func();
+ if (ret < 0)
+ return ret;
+ ret = numa_cleanup_meminfo(&numa_meminfo);
+ if (ret < 0)
+ return ret;
+
+ numa_emulation(&numa_meminfo, numa_distance_cnt);
+
+ ret = numa_register_memblks(&numa_meminfo);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < nr_cpu_ids; i++) {
+ int nid = early_cpu_to_node(i);
+
+ if (nid == NUMA_NO_NODE)
+ continue;
+ if (!node_online(nid))
+ numa_clear_node(i);
+ }
+ numa_init_array();
+ return 0;
+}
+
+/**
+ * dummy_numa_init - Fallback dummy NUMA init
+ *
+ * Used if there's no underlying NUMA architecture, NUMA initialization
+ * fails, or NUMA is disabled on the command line.
+ *
+ * Must online at least one node and add memory blocks that cover all
+ * allowed memory. This function must not fail.
+ */
+static int __init dummy_numa_init(void)
+{
+ printk(KERN_INFO "%s\n",
+ numa_off ? "NUMA turned off" : "No NUMA configuration found");
+ printk(KERN_INFO "Faking a node at %016Lx-%016Lx\n",
+ 0LLU, PFN_PHYS(max_pfn));
+
+ node_set(0, numa_nodes_parsed);
+ numa_add_memblk(0, 0, PFN_PHYS(max_pfn));
+
+ return 0;
+}
+
+/**
+ * x86_numa_init - Initialize NUMA
+ *
+ * Try each configured NUMA initialization method until one succeeds. The
+ * last fallback is dummy single node config encomapssing whole memory and
+ * never fails.
+ */
+void __init x86_numa_init(void)
+{
+ if (!numa_off) {
+#ifdef CONFIG_X86_NUMAQ
+ if (!numa_init(numaq_numa_init))
+ return;
+#endif
+#ifdef CONFIG_ACPI_NUMA
+ if (!numa_init(x86_acpi_numa_init))
+ return;
+#endif
+#ifdef CONFIG_AMD_NUMA
+ if (!numa_init(amd_numa_init))
+ return;
+#endif
+ }
+
+ numa_init(dummy_numa_init);
+}
+
static __init int find_near_online_node(int node)
{
int n, val;
@@ -282,3 +809,18 @@
EXPORT_SYMBOL(cpumask_of_node);
#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int memory_add_physaddr_to_nid(u64 start)
+{
+ struct numa_meminfo *mi = &numa_meminfo;
+ int nid = mi->blk[0].nid;
+ int i;
+
+ for (i = 0; i < mi->nr_blks; i++)
+ if (mi->blk[i].start <= start && mi->blk[i].end > start)
+ nid = mi->blk[i].nid;
+ return nid;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index bde3906..849a975 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -22,39 +22,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/nodemask.h>
#include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/pfn.h>
-#include <linux/swap.h>
-#include <linux/acpi.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include <asm/mmzone.h>
-#include <asm/bios_ebda.h>
-#include <asm/proto.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
-/*
- * numa interface - we expect the numa architecture specific code to have
- * populated the following initialisation.
- *
- * 1) node_online_map - the map of all nodes configured (online) in the system
- * 2) node_start_pfn - the starting page frame number for a node
- * 3) node_end_pfn - the ending page fram number for a node
- */
-unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
-unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
-
+#include "numa_internal.h"
#ifdef CONFIG_DISCONTIGMEM
/*
@@ -99,108 +71,46 @@
}
#endif
-extern unsigned long find_max_low_pfn(void);
extern unsigned long highend_pfn, highstart_pfn;
#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
-unsigned long node_remap_size[MAX_NUMNODES];
static void *node_remap_start_vaddr[MAX_NUMNODES];
void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
-static unsigned long kva_start_pfn;
-static unsigned long kva_pages;
-
-int __cpuinit numa_cpu_node(int cpu)
-{
- return apic->x86_32_numa_cpu_node(cpu);
-}
-
/*
- * FLAT - support for basic PC memory model with discontig enabled, essentially
- * a single node with all available processors in it with a flat
- * memory map.
- */
-int __init get_memcfg_numa_flat(void)
-{
- printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
-
- node_start_pfn[0] = 0;
- node_end_pfn[0] = max_pfn;
- memblock_x86_register_active_regions(0, 0, max_pfn);
- memory_present(0, 0, max_pfn);
- node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
-
- /* Indicate there is one node available. */
- nodes_clear(node_online_map);
- node_set_online(0);
- return 1;
-}
-
-/*
- * Find the highest page frame number we have available for the node
- */
-static void __init propagate_e820_map_node(int nid)
-{
- if (node_end_pfn[nid] > max_pfn)
- node_end_pfn[nid] = max_pfn;
- /*
- * if a user has given mem=XXXX, then we need to make sure
- * that the node _starts_ before that, too, not just ends
- */
- if (node_start_pfn[nid] > max_pfn)
- node_start_pfn[nid] = max_pfn;
- BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
-}
-
-/*
- * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
- * method. For node zero take this from the bottom of memory, for
- * subsequent nodes place them at node_remap_start_vaddr which contains
- * node local data in physically node local memory. See setup_memory()
- * for details.
- */
-static void __init allocate_pgdat(int nid)
-{
- char buf[16];
-
- if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
- NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
- else {
- unsigned long pgdat_phys;
- pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT,
- max_pfn_mapped<<PAGE_SHIFT,
- sizeof(pg_data_t),
- PAGE_SIZE);
- NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
- memset(buf, 0, sizeof(buf));
- sprintf(buf, "NODE_DATA %d", nid);
- memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
- }
- printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
- nid, (unsigned long)NODE_DATA(nid));
-}
-
-/*
- * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
- * virtual address space (KVA) is reserved and portions of nodes are mapped
- * using it. This is to allow node-local memory to be allocated for
- * structures that would normally require ZONE_NORMAL. The memory is
- * allocated with alloc_remap() and callers should be prepared to allocate
- * from the bootmem allocator instead.
+ * Remap memory allocator
*/
static unsigned long node_remap_start_pfn[MAX_NUMNODES];
static void *node_remap_end_vaddr[MAX_NUMNODES];
static void *node_remap_alloc_vaddr[MAX_NUMNODES];
-static unsigned long node_remap_offset[MAX_NUMNODES];
+/**
+ * alloc_remap - Allocate remapped memory
+ * @nid: NUMA node to allocate memory from
+ * @size: The size of allocation
+ *
+ * Allocate @size bytes from the remap area of NUMA node @nid. The
+ * size of the remap area is predetermined by init_alloc_remap() and
+ * only the callers considered there should call this function. For
+ * more info, please read the comment on top of init_alloc_remap().
+ *
+ * The caller must be ready to handle allocation failure from this
+ * function and fall back to regular memory allocator in such cases.
+ *
+ * CONTEXT:
+ * Single CPU early boot context.
+ *
+ * RETURNS:
+ * Pointer to the allocated memory on success, %NULL on failure.
+ */
void *alloc_remap(int nid, unsigned long size)
{
void *allocation = node_remap_alloc_vaddr[nid];
size = ALIGN(size, L1_CACHE_BYTES);
- if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
+ if (!allocation || (allocation + size) > node_remap_end_vaddr[nid])
return NULL;
node_remap_alloc_vaddr[nid] += size;
@@ -209,26 +119,6 @@
return allocation;
}
-static void __init remap_numa_kva(void)
-{
- void *vaddr;
- unsigned long pfn;
- int node;
-
- for_each_online_node(node) {
- printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
- for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
- vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
- printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
- (unsigned long)vaddr,
- node_remap_start_pfn[node] + pfn);
- set_pmd_pfn((ulong) vaddr,
- node_remap_start_pfn[node] + pfn,
- PAGE_KERNEL_LARGE);
- }
- }
-}
-
#ifdef CONFIG_HIBERNATION
/**
* resume_map_numa_kva - add KVA mapping to the temporary page tables created
@@ -240,15 +130,16 @@
int node;
for_each_online_node(node) {
- unsigned long start_va, start_pfn, size, pfn;
+ unsigned long start_va, start_pfn, nr_pages, pfn;
start_va = (unsigned long)node_remap_start_vaddr[node];
start_pfn = node_remap_start_pfn[node];
- size = node_remap_size[node];
+ nr_pages = (node_remap_end_vaddr[node] -
+ node_remap_start_vaddr[node]) >> PAGE_SHIFT;
printk(KERN_DEBUG "%s: node %d\n", __func__, node);
- for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) {
+ for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) {
unsigned long vaddr = start_va + (pfn << PAGE_SHIFT);
pgd_t *pgd = pgd_base + pgd_index(vaddr);
pud_t *pud = pud_offset(pgd, vaddr);
@@ -264,132 +155,89 @@
}
#endif
-static __init unsigned long calculate_numa_remap_pages(void)
+/**
+ * init_alloc_remap - Initialize remap allocator for a NUMA node
+ * @nid: NUMA node to initizlie remap allocator for
+ *
+ * NUMA nodes may end up without any lowmem. As allocating pgdat and
+ * memmap on a different node with lowmem is inefficient, a special
+ * remap allocator is implemented which can be used by alloc_remap().
+ *
+ * For each node, the amount of memory which will be necessary for
+ * pgdat and memmap is calculated and two memory areas of the size are
+ * allocated - one in the node and the other in lowmem; then, the area
+ * in the node is remapped to the lowmem area.
+ *
+ * As pgdat and memmap must be allocated in lowmem anyway, this
+ * doesn't waste lowmem address space; however, the actual lowmem
+ * which gets remapped over is wasted. The amount shouldn't be
+ * problematic on machines this feature will be used.
+ *
+ * Initialization failure isn't fatal. alloc_remap() is used
+ * opportunistically and the callers will fall back to other memory
+ * allocation mechanisms on failure.
+ */
+void __init init_alloc_remap(int nid, u64 start, u64 end)
{
- int nid;
- unsigned long size, reserve_pages = 0;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long end_pfn = end >> PAGE_SHIFT;
+ unsigned long size, pfn;
+ u64 node_pa, remap_pa;
+ void *remap_va;
- for_each_online_node(nid) {
- u64 node_kva_target;
- u64 node_kva_final;
+ /*
+ * The acpi/srat node info can show hot-add memroy zones where
+ * memory could be added but not currently present.
+ */
+ printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
+ nid, start_pfn, end_pfn);
- /*
- * The acpi/srat node info can show hot-add memroy zones
- * where memory could be added but not currently present.
- */
- printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
- nid, node_start_pfn[nid], node_end_pfn[nid]);
- if (node_start_pfn[nid] > max_pfn)
- continue;
- if (!node_end_pfn[nid])
- continue;
- if (node_end_pfn[nid] > max_pfn)
- node_end_pfn[nid] = max_pfn;
+ /* calculate the necessary space aligned to large page size */
+ size = node_memmap_size_bytes(nid, start_pfn, end_pfn);
+ size += ALIGN(sizeof(pg_data_t), PAGE_SIZE);
+ size = ALIGN(size, LARGE_PAGE_BYTES);
- /* ensure the remap includes space for the pgdat. */
- size = node_remap_size[nid] + sizeof(pg_data_t);
-
- /* convert size to large (pmd size) pages, rounding up */
- size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
- /* now the roundup is correct, convert to PAGE_SIZE pages */
- size = size * PTRS_PER_PTE;
-
- node_kva_target = round_down(node_end_pfn[nid] - size,
- PTRS_PER_PTE);
- node_kva_target <<= PAGE_SHIFT;
- do {
- node_kva_final = memblock_find_in_range(node_kva_target,
- ((u64)node_end_pfn[nid])<<PAGE_SHIFT,
- ((u64)size)<<PAGE_SHIFT,
- LARGE_PAGE_BYTES);
- node_kva_target -= LARGE_PAGE_BYTES;
- } while (node_kva_final == MEMBLOCK_ERROR &&
- (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
-
- if (node_kva_final == MEMBLOCK_ERROR)
- panic("Can not get kva ram\n");
-
- node_remap_size[nid] = size;
- node_remap_offset[nid] = reserve_pages;
- reserve_pages += size;
- printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
- " node %d at %llx\n",
- size, nid, node_kva_final>>PAGE_SHIFT);
-
- /*
- * prevent kva address below max_low_pfn want it on system
- * with less memory later.
- * layout will be: KVA address , KVA RAM
- *
- * we are supposed to only record the one less then max_low_pfn
- * but we could have some hole in high memory, and it will only
- * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
- * to use it as free.
- * So memblock_x86_reserve_range here, hope we don't run out of that array
- */
- memblock_x86_reserve_range(node_kva_final,
- node_kva_final+(((u64)size)<<PAGE_SHIFT),
- "KVA RAM");
-
- node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
+ /* allocate node memory and the lowmem remap area */
+ node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
+ if (node_pa == MEMBLOCK_ERROR) {
+ pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
+ size, nid);
+ return;
}
- printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
- reserve_pages);
- return reserve_pages;
-}
+ memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
-static void init_remap_allocator(int nid)
-{
- node_remap_start_vaddr[nid] = pfn_to_kaddr(
- kva_start_pfn + node_remap_offset[nid]);
- node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
- (node_remap_size[nid] * PAGE_SIZE);
- node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
- ALIGN(sizeof(pg_data_t), PAGE_SIZE);
+ remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
+ max_low_pfn << PAGE_SHIFT,
+ size, LARGE_PAGE_BYTES);
+ if (remap_pa == MEMBLOCK_ERROR) {
+ pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
+ size, nid);
+ memblock_x86_free_range(node_pa, node_pa + size);
+ return;
+ }
+ memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+ remap_va = phys_to_virt(remap_pa);
- printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
- (ulong) node_remap_start_vaddr[nid],
- (ulong) node_remap_end_vaddr[nid]);
+ /* perform actual remap */
+ for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE)
+ set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT),
+ (node_pa >> PAGE_SHIFT) + pfn,
+ PAGE_KERNEL_LARGE);
+
+ /* initialize remap allocator parameters */
+ node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
+ node_remap_start_vaddr[nid] = remap_va;
+ node_remap_end_vaddr[nid] = remap_va + size;
+ node_remap_alloc_vaddr[nid] = remap_va;
+
+ printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n",
+ nid, node_pa, node_pa + size, remap_va, remap_va + size);
}
void __init initmem_init(void)
{
- int nid;
- long kva_target_pfn;
+ x86_numa_init();
- /*
- * When mapping a NUMA machine we allocate the node_mem_map arrays
- * from node local memory. They are then mapped directly into KVA
- * between zone normal and vmalloc space. Calculate the size of
- * this space and use it to adjust the boundary between ZONE_NORMAL
- * and ZONE_HIGHMEM.
- */
-
- get_memcfg_numa();
- numa_init_array();
-
- kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
-
- kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
- do {
- kva_start_pfn = memblock_find_in_range(kva_target_pfn<<PAGE_SHIFT,
- max_low_pfn<<PAGE_SHIFT,
- kva_pages<<PAGE_SHIFT,
- PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
- kva_target_pfn -= PTRS_PER_PTE;
- } while (kva_start_pfn == MEMBLOCK_ERROR && kva_target_pfn > min_low_pfn);
-
- if (kva_start_pfn == MEMBLOCK_ERROR)
- panic("Can not get kva space\n");
-
- printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
- kva_start_pfn, max_low_pfn);
- printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
-
- /* avoid clash with initrd */
- memblock_x86_reserve_range(kva_start_pfn<<PAGE_SHIFT,
- (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
- "KVA PG");
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > max_low_pfn)
@@ -409,51 +257,9 @@
printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
(ulong) pfn_to_kaddr(max_low_pfn));
- for_each_online_node(nid) {
- init_remap_allocator(nid);
-
- allocate_pgdat(nid);
- }
- remap_numa_kva();
printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
(ulong) pfn_to_kaddr(highstart_pfn));
- for_each_online_node(nid)
- propagate_e820_map_node(nid);
-
- for_each_online_node(nid) {
- memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
- NODE_DATA(nid)->node_id = nid;
- }
setup_bootmem_allocator();
}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-static int paddr_to_nid(u64 addr)
-{
- int nid;
- unsigned long pfn = PFN_DOWN(addr);
-
- for_each_node(nid)
- if (node_start_pfn[nid] <= pfn &&
- pfn < node_end_pfn[nid])
- return nid;
-
- return -1;
-}
-
-/*
- * This function is used to ask node id BEFORE memmap and mem_section's
- * initialization (pfn_to_nid() can't be used yet).
- * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
- */
-int memory_add_physaddr_to_nid(u64 addr)
-{
- int nid = paddr_to_nid(addr);
- return (nid >= 0) ? nid : 0;
-}
-
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index e8c00cc..dd27f40 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -2,646 +2,13 @@
* Generic VM initialization for x86-64 NUMA setups.
* Copyright 2002,2003 Andi Kleen, SuSE Labs.
*/
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/init.h>
#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/ctype.h>
-#include <linux/module.h>
-#include <linux/nodemask.h>
-#include <linux/sched.h>
-#include <linux/acpi.h>
-
-#include <asm/e820.h>
-#include <asm/proto.h>
-#include <asm/dma.h>
-#include <asm/acpi.h>
-#include <asm/amd_nb.h>
#include "numa_internal.h"
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
-nodemask_t numa_nodes_parsed __initdata;
-
-struct memnode memnode;
-
-static unsigned long __initdata nodemap_addr;
-static unsigned long __initdata nodemap_size;
-
-static struct numa_meminfo numa_meminfo __initdata;
-
-static int numa_distance_cnt;
-static u8 *numa_distance;
-
-/*
- * Given a shift value, try to populate memnodemap[]
- * Returns :
- * 1 if OK
- * 0 if memnodmap[] too small (of shift too small)
- * -1 if node overlap or lost ram (shift too big)
- */
-static int __init populate_memnodemap(const struct numa_meminfo *mi, int shift)
-{
- unsigned long addr, end;
- int i, res = -1;
-
- memset(memnodemap, 0xff, sizeof(s16)*memnodemapsize);
- for (i = 0; i < mi->nr_blks; i++) {
- addr = mi->blk[i].start;
- end = mi->blk[i].end;
- if (addr >= end)
- continue;
- if ((end >> shift) >= memnodemapsize)
- return 0;
- do {
- if (memnodemap[addr >> shift] != NUMA_NO_NODE)
- return -1;
- memnodemap[addr >> shift] = mi->blk[i].nid;
- addr += (1UL << shift);
- } while (addr < end);
- res = 1;
- }
- return res;
-}
-
-static int __init allocate_cachealigned_memnodemap(void)
-{
- unsigned long addr;
-
- memnodemap = memnode.embedded_map;
- if (memnodemapsize <= ARRAY_SIZE(memnode.embedded_map))
- return 0;
-
- addr = 0x8000;
- nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
- nodemap_addr = memblock_find_in_range(addr, get_max_mapped(),
- nodemap_size, L1_CACHE_BYTES);
- if (nodemap_addr == MEMBLOCK_ERROR) {
- printk(KERN_ERR
- "NUMA: Unable to allocate Memory to Node hash map\n");
- nodemap_addr = nodemap_size = 0;
- return -1;
- }
- memnodemap = phys_to_virt(nodemap_addr);
- memblock_x86_reserve_range(nodemap_addr, nodemap_addr + nodemap_size, "MEMNODEMAP");
-
- printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n",
- nodemap_addr, nodemap_addr + nodemap_size);
- return 0;
-}
-
-/*
- * The LSB of all start and end addresses in the node map is the value of the
- * maximum possible shift.
- */
-static int __init extract_lsb_from_nodes(const struct numa_meminfo *mi)
-{
- int i, nodes_used = 0;
- unsigned long start, end;
- unsigned long bitfield = 0, memtop = 0;
-
- for (i = 0; i < mi->nr_blks; i++) {
- start = mi->blk[i].start;
- end = mi->blk[i].end;
- if (start >= end)
- continue;
- bitfield |= start;
- nodes_used++;
- if (end > memtop)
- memtop = end;
- }
- if (nodes_used <= 1)
- i = 63;
- else
- i = find_first_bit(&bitfield, sizeof(unsigned long)*8);
- memnodemapsize = (memtop >> i)+1;
- return i;
-}
-
-static int __init compute_hash_shift(const struct numa_meminfo *mi)
-{
- int shift;
-
- shift = extract_lsb_from_nodes(mi);
- if (allocate_cachealigned_memnodemap())
- return -1;
- printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n",
- shift);
-
- if (populate_memnodemap(mi, shift) != 1) {
- printk(KERN_INFO "Your memory is not aligned you need to "
- "rebuild your kernel with a bigger NODEMAPSIZE "
- "shift=%d\n", shift);
- return -1;
- }
- return shift;
-}
-
-int __meminit __early_pfn_to_nid(unsigned long pfn)
-{
- return phys_to_nid(pfn << PAGE_SHIFT);
-}
-
-static void * __init early_node_mem(int nodeid, unsigned long start,
- unsigned long end, unsigned long size,
- unsigned long align)
-{
- unsigned long mem;
-
- /*
- * put it on high as possible
- * something will go with NODE_DATA
- */
- if (start < (MAX_DMA_PFN<<PAGE_SHIFT))
- start = MAX_DMA_PFN<<PAGE_SHIFT;
- if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) &&
- end > (MAX_DMA32_PFN<<PAGE_SHIFT))
- start = MAX_DMA32_PFN<<PAGE_SHIFT;
- mem = memblock_x86_find_in_range_node(nodeid, start, end, size, align);
- if (mem != MEMBLOCK_ERROR)
- return __va(mem);
-
- /* extend the search scope */
- end = max_pfn_mapped << PAGE_SHIFT;
- start = MAX_DMA_PFN << PAGE_SHIFT;
- mem = memblock_find_in_range(start, end, size, align);
- if (mem != MEMBLOCK_ERROR)
- return __va(mem);
-
- printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
- size, nodeid);
-
- return NULL;
-}
-
-static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
- struct numa_meminfo *mi)
-{
- /* ignore zero length blks */
- if (start == end)
- return 0;
-
- /* whine about and ignore invalid blks */
- if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
- pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n",
- nid, start, end);
- return 0;
- }
-
- if (mi->nr_blks >= NR_NODE_MEMBLKS) {
- pr_err("NUMA: too many memblk ranges\n");
- return -EINVAL;
- }
-
- mi->blk[mi->nr_blks].start = start;
- mi->blk[mi->nr_blks].end = end;
- mi->blk[mi->nr_blks].nid = nid;
- mi->nr_blks++;
- return 0;
-}
-
-/**
- * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
- * @idx: Index of memblk to remove
- * @mi: numa_meminfo to remove memblk from
- *
- * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
- * decrementing @mi->nr_blks.
- */
-void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
-{
- mi->nr_blks--;
- memmove(&mi->blk[idx], &mi->blk[idx + 1],
- (mi->nr_blks - idx) * sizeof(mi->blk[0]));
-}
-
-/**
- * numa_add_memblk - Add one numa_memblk to numa_meminfo
- * @nid: NUMA node ID of the new memblk
- * @start: Start address of the new memblk
- * @end: End address of the new memblk
- *
- * Add a new memblk to the default numa_meminfo.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_add_memblk(int nid, u64 start, u64 end)
-{
- return numa_add_memblk_to(nid, start, end, &numa_meminfo);
-}
-
-/* Initialize bootmem allocator for a node */
-void __init
-setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
-{
- unsigned long start_pfn, last_pfn, nodedata_phys;
- const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
- int nid;
-
- if (!end)
- return;
-
- /*
- * Don't confuse VM with a node that doesn't have the
- * minimum amount of memory:
- */
- if (end && (end - start) < NODE_MIN_SIZE)
- return;
-
- start = roundup(start, ZONE_ALIGN);
-
- printk(KERN_INFO "Initmem setup node %d %016lx-%016lx\n", nodeid,
- start, end);
-
- start_pfn = start >> PAGE_SHIFT;
- last_pfn = end >> PAGE_SHIFT;
-
- node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size,
- SMP_CACHE_BYTES);
- if (node_data[nodeid] == NULL)
- return;
- nodedata_phys = __pa(node_data[nodeid]);
- memblock_x86_reserve_range(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA");
- printk(KERN_INFO " NODE_DATA [%016lx - %016lx]\n", nodedata_phys,
- nodedata_phys + pgdat_size - 1);
- nid = phys_to_nid(nodedata_phys);
- if (nid != nodeid)
- printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nodeid, nid);
-
- memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
- NODE_DATA(nodeid)->node_id = nodeid;
- NODE_DATA(nodeid)->node_start_pfn = start_pfn;
- NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
-
- node_set_online(nodeid);
-}
-
-/**
- * numa_cleanup_meminfo - Cleanup a numa_meminfo
- * @mi: numa_meminfo to clean up
- *
- * Sanitize @mi by merging and removing unncessary memblks. Also check for
- * conflicts and clear unused memblks.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
-{
- const u64 low = 0;
- const u64 high = (u64)max_pfn << PAGE_SHIFT;
- int i, j, k;
-
- for (i = 0; i < mi->nr_blks; i++) {
- struct numa_memblk *bi = &mi->blk[i];
-
- /* make sure all blocks are inside the limits */
- bi->start = max(bi->start, low);
- bi->end = min(bi->end, high);
-
- /* and there's no empty block */
- if (bi->start == bi->end) {
- numa_remove_memblk_from(i--, mi);
- continue;
- }
-
- for (j = i + 1; j < mi->nr_blks; j++) {
- struct numa_memblk *bj = &mi->blk[j];
- unsigned long start, end;
-
- /*
- * See whether there are overlapping blocks. Whine
- * about but allow overlaps of the same nid. They
- * will be merged below.
- */
- if (bi->end > bj->start && bi->start < bj->end) {
- if (bi->nid != bj->nid) {
- pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n",
- bi->nid, bi->start, bi->end,
- bj->nid, bj->start, bj->end);
- return -EINVAL;
- }
- pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n",
- bi->nid, bi->start, bi->end,
- bj->start, bj->end);
- }
-
- /*
- * Join together blocks on the same node, holes
- * between which don't overlap with memory on other
- * nodes.
- */
- if (bi->nid != bj->nid)
- continue;
- start = max(min(bi->start, bj->start), low);
- end = min(max(bi->end, bj->end), high);
- for (k = 0; k < mi->nr_blks; k++) {
- struct numa_memblk *bk = &mi->blk[k];
-
- if (bi->nid == bk->nid)
- continue;
- if (start < bk->end && end > bk->start)
- break;
- }
- if (k < mi->nr_blks)
- continue;
- printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n",
- bi->nid, bi->start, bi->end, bj->start, bj->end,
- start, end);
- bi->start = start;
- bi->end = end;
- numa_remove_memblk_from(j--, mi);
- }
- }
-
- for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
- mi->blk[i].start = mi->blk[i].end = 0;
- mi->blk[i].nid = NUMA_NO_NODE;
- }
-
- return 0;
-}
-
-/*
- * Set nodes, which have memory in @mi, in *@nodemask.
- */
-static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
- const struct numa_meminfo *mi)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
- if (mi->blk[i].start != mi->blk[i].end &&
- mi->blk[i].nid != NUMA_NO_NODE)
- node_set(mi->blk[i].nid, *nodemask);
-}
-
-/**
- * numa_reset_distance - Reset NUMA distance table
- *
- * The current table is freed. The next numa_set_distance() call will
- * create a new one.
- */
-void __init numa_reset_distance(void)
-{
- size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
-
- /* numa_distance could be 1LU marking allocation failure, test cnt */
- if (numa_distance_cnt)
- memblock_x86_free_range(__pa(numa_distance),
- __pa(numa_distance) + size);
- numa_distance_cnt = 0;
- numa_distance = NULL; /* enable table creation */
-}
-
-static int __init numa_alloc_distance(void)
-{
- nodemask_t nodes_parsed;
- size_t size;
- int i, j, cnt = 0;
- u64 phys;
-
- /* size the new table and allocate it */
- nodes_parsed = numa_nodes_parsed;
- numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
-
- for_each_node_mask(i, nodes_parsed)
- cnt = i;
- cnt++;
- size = cnt * cnt * sizeof(numa_distance[0]);
-
- phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT,
- size, PAGE_SIZE);
- if (phys == MEMBLOCK_ERROR) {
- pr_warning("NUMA: Warning: can't allocate distance table!\n");
- /* don't retry until explicitly reset */
- numa_distance = (void *)1LU;
- return -ENOMEM;
- }
- memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
-
- numa_distance = __va(phys);
- numa_distance_cnt = cnt;
-
- /* fill with the default distances */
- for (i = 0; i < cnt; i++)
- for (j = 0; j < cnt; j++)
- numa_distance[i * cnt + j] = i == j ?
- LOCAL_DISTANCE : REMOTE_DISTANCE;
- printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
-
- return 0;
-}
-
-/**
- * numa_set_distance - Set NUMA distance from one NUMA to another
- * @from: the 'from' node to set distance
- * @to: the 'to' node to set distance
- * @distance: NUMA distance
- *
- * Set the distance from node @from to @to to @distance. If distance table
- * doesn't exist, one which is large enough to accommodate all the currently
- * known nodes will be created.
- *
- * If such table cannot be allocated, a warning is printed and further
- * calls are ignored until the distance table is reset with
- * numa_reset_distance().
- *
- * If @from or @to is higher than the highest known node at the time of
- * table creation or @distance doesn't make sense, the call is ignored.
- * This is to allow simplification of specific NUMA config implementations.
- */
-void __init numa_set_distance(int from, int to, int distance)
-{
- if (!numa_distance && numa_alloc_distance() < 0)
- return;
-
- if (from >= numa_distance_cnt || to >= numa_distance_cnt) {
- printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n",
- from, to, distance);
- return;
- }
-
- if ((u8)distance != distance ||
- (from == to && distance != LOCAL_DISTANCE)) {
- pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
- from, to, distance);
- return;
- }
-
- numa_distance[from * numa_distance_cnt + to] = distance;
-}
-
-int __node_distance(int from, int to)
-{
- if (from >= numa_distance_cnt || to >= numa_distance_cnt)
- return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
- return numa_distance[from * numa_distance_cnt + to];
-}
-EXPORT_SYMBOL(__node_distance);
-
-/*
- * Sanity check to catch more bad NUMA configurations (they are amazingly
- * common). Make sure the nodes cover all memory.
- */
-static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
-{
- unsigned long numaram, e820ram;
- int i;
-
- numaram = 0;
- for (i = 0; i < mi->nr_blks; i++) {
- unsigned long s = mi->blk[i].start >> PAGE_SHIFT;
- unsigned long e = mi->blk[i].end >> PAGE_SHIFT;
- numaram += e - s;
- numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
- if ((long)numaram < 0)
- numaram = 0;
- }
-
- e820ram = max_pfn - (memblock_x86_hole_size(0,
- max_pfn << PAGE_SHIFT) >> PAGE_SHIFT);
- /* We seem to lose 3 pages somewhere. Allow 1M of slack. */
- if ((long)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
- printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n",
- (numaram << PAGE_SHIFT) >> 20,
- (e820ram << PAGE_SHIFT) >> 20);
- return false;
- }
- return true;
-}
-
-static int __init numa_register_memblks(struct numa_meminfo *mi)
-{
- int i, nid;
-
- /* Account for nodes with cpus and no memory */
- node_possible_map = numa_nodes_parsed;
- numa_nodemask_from_meminfo(&node_possible_map, mi);
- if (WARN_ON(nodes_empty(node_possible_map)))
- return -EINVAL;
-
- memnode_shift = compute_hash_shift(mi);
- if (memnode_shift < 0) {
- printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n");
- return -EINVAL;
- }
-
- for (i = 0; i < mi->nr_blks; i++)
- memblock_x86_register_active_regions(mi->blk[i].nid,
- mi->blk[i].start >> PAGE_SHIFT,
- mi->blk[i].end >> PAGE_SHIFT);
-
- /* for out of order entries */
- sort_node_map();
- if (!numa_meminfo_cover_memory(mi))
- return -EINVAL;
-
- /* Finally register nodes. */
- for_each_node_mask(nid, node_possible_map) {
- u64 start = (u64)max_pfn << PAGE_SHIFT;
- u64 end = 0;
-
- for (i = 0; i < mi->nr_blks; i++) {
- if (nid != mi->blk[i].nid)
- continue;
- start = min(mi->blk[i].start, start);
- end = max(mi->blk[i].end, end);
- }
-
- if (start < end)
- setup_node_bootmem(nid, start, end);
- }
-
- return 0;
-}
-
-/**
- * dummy_numma_init - Fallback dummy NUMA init
- *
- * Used if there's no underlying NUMA architecture, NUMA initialization
- * fails, or NUMA is disabled on the command line.
- *
- * Must online at least one node and add memory blocks that cover all
- * allowed memory. This function must not fail.
- */
-static int __init dummy_numa_init(void)
-{
- printk(KERN_INFO "%s\n",
- numa_off ? "NUMA turned off" : "No NUMA configuration found");
- printk(KERN_INFO "Faking a node at %016lx-%016lx\n",
- 0LU, max_pfn << PAGE_SHIFT);
-
- node_set(0, numa_nodes_parsed);
- numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT);
-
- return 0;
-}
-
-static int __init numa_init(int (*init_func)(void))
-{
- int i;
- int ret;
-
- for (i = 0; i < MAX_LOCAL_APIC; i++)
- set_apicid_to_node(i, NUMA_NO_NODE);
-
- nodes_clear(numa_nodes_parsed);
- nodes_clear(node_possible_map);
- nodes_clear(node_online_map);
- memset(&numa_meminfo, 0, sizeof(numa_meminfo));
- remove_all_active_ranges();
- numa_reset_distance();
-
- ret = init_func();
- if (ret < 0)
- return ret;
- ret = numa_cleanup_meminfo(&numa_meminfo);
- if (ret < 0)
- return ret;
-
- numa_emulation(&numa_meminfo, numa_distance_cnt);
-
- ret = numa_register_memblks(&numa_meminfo);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < nr_cpu_ids; i++) {
- int nid = early_cpu_to_node(i);
-
- if (nid == NUMA_NO_NODE)
- continue;
- if (!node_online(nid))
- numa_clear_node(i);
- }
- numa_init_array();
- return 0;
-}
-
void __init initmem_init(void)
{
- int ret;
-
- if (!numa_off) {
-#ifdef CONFIG_ACPI_NUMA
- ret = numa_init(x86_acpi_numa_init);
- if (!ret)
- return;
-#endif
-#ifdef CONFIG_AMD_NUMA
- ret = numa_init(amd_numa_init);
- if (!ret)
- return;
-#endif
- }
-
- numa_init(dummy_numa_init);
+ x86_numa_init();
}
unsigned long __init numa_free_all_bootmem(void)
@@ -656,12 +23,3 @@
return pages;
}
-
-int __cpuinit numa_cpu_node(int cpu)
-{
- int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
-
- if (apicid != BAD_APICID)
- return __apicid_to_node[apicid];
- return NUMA_NO_NODE;
-}
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index de84cc1..d0ed086 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -5,6 +5,7 @@
#include <linux/errno.h>
#include <linux/topology.h>
#include <linux/memblock.h>
+#include <linux/bootmem.h>
#include <asm/dma.h>
#include "numa_internal.h"
@@ -84,7 +85,13 @@
nr_nodes = MAX_NUMNODES;
}
- size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes;
+ /*
+ * Calculate target node size. x86_32 freaks on __udivdi3() so do
+ * the division in ulong number of pages and convert back.
+ */
+ size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
+ size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
+
/*
* Calculate the number of big nodes that can be allocated as a result
* of consolidating the remainder.
@@ -226,7 +233,7 @@
*/
while (nodes_weight(physnode_mask)) {
for_each_node_mask(i, physnode_mask) {
- u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT;
+ u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
u64 start, limit, end;
int phys_blk;
@@ -298,7 +305,7 @@
{
static struct numa_meminfo ei __initdata;
static struct numa_meminfo pi __initdata;
- const u64 max_addr = max_pfn << PAGE_SHIFT;
+ const u64 max_addr = PFN_PHYS(max_pfn);
u8 *phys_dist = NULL;
size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]);
int max_emu_nid, dfl_phys_nid;
@@ -342,8 +349,7 @@
if (numa_dist_cnt) {
u64 phys;
- phys = memblock_find_in_range(0,
- (u64)max_pfn_mapped << PAGE_SHIFT,
+ phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
phys_size, PAGE_SIZE);
if (phys == MEMBLOCK_ERROR) {
pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h
index ef2d973..7178c3a 100644
--- a/arch/x86/mm/numa_internal.h
+++ b/arch/x86/mm/numa_internal.h
@@ -19,6 +19,14 @@
int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
void __init numa_reset_distance(void);
+void __init x86_numa_init(void);
+
+#ifdef CONFIG_X86_64
+static inline void init_alloc_remap(int nid, u64 start, u64 end) { }
+#else
+void __init init_alloc_remap(int nid, u64 start, u64 end);
+#endif
+
#ifdef CONFIG_NUMA_EMU
void __init numa_emulation(struct numa_meminfo *numa_meminfo,
int numa_dist_cnt);
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat.c
similarity index 67%
rename from arch/x86/mm/srat_64.c
rename to arch/x86/mm/srat.c
index 8e9d339..81dbfde 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat.c
@@ -26,8 +26,6 @@
int acpi_numa __initdata;
-static struct bootnode nodes_add[MAX_NUMNODES];
-
static __init int setup_node(int pxm)
{
return acpi_map_pxm_to_node(pxm);
@@ -37,7 +35,6 @@
{
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
- memset(nodes_add, 0, sizeof(nodes_add));
}
static __init inline int srat_disabled(void)
@@ -131,73 +128,17 @@
pxm, apic_id, node);
}
-#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+#ifdef CONFIG_MEMORY_HOTPLUG
static inline int save_add_info(void) {return 1;}
#else
static inline int save_add_info(void) {return 0;}
#endif
-/*
- * Update nodes_add[]
- * This code supports one contiguous hot add area per node
- */
-static void __init
-update_nodes_add(int node, unsigned long start, unsigned long end)
-{
- unsigned long s_pfn = start >> PAGE_SHIFT;
- unsigned long e_pfn = end >> PAGE_SHIFT;
- int changed = 0;
- struct bootnode *nd = &nodes_add[node];
-
- /* I had some trouble with strange memory hotadd regions breaking
- the boot. Be very strict here and reject anything unexpected.
- If you want working memory hotadd write correct SRATs.
-
- The node size check is a basic sanity check to guard against
- mistakes */
- if ((signed long)(end - start) < NODE_MIN_SIZE) {
- printk(KERN_ERR "SRAT: Hotplug area too small\n");
- return;
- }
-
- /* This check might be a bit too strict, but I'm keeping it for now. */
- if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) {
- printk(KERN_ERR
- "SRAT: Hotplug area %lu -> %lu has existing memory\n",
- s_pfn, e_pfn);
- return;
- }
-
- /* Looks good */
-
- if (nd->start == nd->end) {
- nd->start = start;
- nd->end = end;
- changed = 1;
- } else {
- if (nd->start == end) {
- nd->start = start;
- changed = 1;
- }
- if (nd->end == start) {
- nd->end = end;
- changed = 1;
- }
- if (!changed)
- printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
- }
-
- if (changed) {
- node_set(node, numa_nodes_parsed);
- printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
- nd->start, nd->end);
- }
-}
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
void __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
- unsigned long start, end;
+ u64 start, end;
int node, pxm;
if (srat_disabled())
@@ -226,11 +167,8 @@
return;
}
- printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
+ printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
start, end);
-
- if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)
- update_nodes_add(node, start, end);
}
void __init acpi_numa_arch_fixup(void) {}
@@ -244,17 +182,3 @@
return ret;
return srat_disabled() ? -EINVAL : 0;
}
-
-#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY)
-int memory_add_physaddr_to_nid(u64 start)
-{
- int i, ret = 0;
-
- for_each_node(i)
- if (nodes_add[i].start <= start && nodes_add[i].end > start)
- ret = i;
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
deleted file mode 100644
index 364f36b..0000000
--- a/arch/x86/mm/srat_32.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Some of the code in this file has been gleaned from the 64 bit
- * discontigmem support code base.
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to Pat Gaughen <gone@us.ibm.com>
- */
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/acpi.h>
-#include <linux/nodemask.h>
-#include <asm/srat.h>
-#include <asm/topology.h>
-#include <asm/smp.h>
-#include <asm/e820.h>
-
-/*
- * proximity macros and definitions
- */
-#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */
-#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */
-#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
-#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
-/* bitmap length; _PXM is at most 255 */
-#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8)
-static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */
-
-#define MAX_CHUNKS_PER_NODE 3
-#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
-struct node_memory_chunk_s {
- unsigned long start_pfn;
- unsigned long end_pfn;
- u8 pxm; // proximity domain of node
- u8 nid; // which cnode contains this chunk?
- u8 bank; // which mem bank on this node
-};
-static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS];
-
-static int __initdata num_memory_chunks; /* total number of memory chunks */
-static u8 __initdata apicid_to_pxm[MAX_LOCAL_APIC];
-
-int acpi_numa __initdata;
-
-static __init void bad_srat(void)
-{
- printk(KERN_ERR "SRAT: SRAT not used.\n");
- acpi_numa = -1;
- num_memory_chunks = 0;
-}
-
-static __init inline int srat_disabled(void)
-{
- return numa_off || acpi_numa < 0;
-}
-
-/* Identify CPU proximity domains */
-void __init
-acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
-{
- if (srat_disabled())
- return;
- if (cpu_affinity->header.length !=
- sizeof(struct acpi_srat_cpu_affinity)) {
- bad_srat();
- return;
- }
-
- if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
- return; /* empty entry */
-
- /* mark this node as "seen" in node bitmap */
- BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
-
- /* don't need to check apic_id here, because it is always 8 bits */
- apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
-
- printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
- cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
-}
-
-/*
- * Identify memory proximity domains and hot-remove capabilities.
- * Fill node memory chunk list structure.
- */
-void __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
-{
- unsigned long long paddr, size;
- unsigned long start_pfn, end_pfn;
- u8 pxm;
- struct node_memory_chunk_s *p, *q, *pend;
-
- if (srat_disabled())
- return;
- if (memory_affinity->header.length !=
- sizeof(struct acpi_srat_mem_affinity)) {
- bad_srat();
- return;
- }
-
- if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
- return; /* empty entry */
-
- pxm = memory_affinity->proximity_domain & 0xff;
-
- /* mark this node as "seen" in node bitmap */
- BMAP_SET(pxm_bitmap, pxm);
-
- /* calculate info for memory chunk structure */
- paddr = memory_affinity->base_address;
- size = memory_affinity->length;
-
- start_pfn = paddr >> PAGE_SHIFT;
- end_pfn = (paddr + size) >> PAGE_SHIFT;
-
-
- if (num_memory_chunks >= MAXCHUNKS) {
- printk(KERN_WARNING "Too many mem chunks in SRAT."
- " Ignoring %lld MBytes at %llx\n",
- size/(1024*1024), paddr);
- return;
- }
-
- /* Insertion sort based on base address */
- pend = &node_memory_chunk[num_memory_chunks];
- for (p = &node_memory_chunk[0]; p < pend; p++) {
- if (start_pfn < p->start_pfn)
- break;
- }
- if (p < pend) {
- for (q = pend; q >= p; q--)
- *(q + 1) = *q;
- }
- p->start_pfn = start_pfn;
- p->end_pfn = end_pfn;
- p->pxm = pxm;
-
- num_memory_chunks++;
-
- printk(KERN_DEBUG "Memory range %08lx to %08lx"
- " in proximity domain %02x %s\n",
- start_pfn, end_pfn,
- pxm,
- ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
- "enabled and removable" : "enabled" ) );
-}
-
-/* Callback for SLIT parsing */
-void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
-{
-}
-
-void acpi_numa_arch_fixup(void)
-{
-}
-/*
- * The SRAT table always lists ascending addresses, so can always
- * assume that the first "start" address that you see is the real
- * start of the node, and that the current "end" address is after
- * the previous one.
- */
-static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
-{
- /*
- * Only add present memory as told by the e820.
- * There is no guarantee from the SRAT that the memory it
- * enumerates is present at boot time because it represents
- * *possible* memory hotplug areas the same as normal RAM.
- */
- if (memory_chunk->start_pfn >= max_pfn) {
- printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
- memory_chunk->start_pfn, memory_chunk->end_pfn);
- return -1;
- }
- if (memory_chunk->nid != nid)
- return -1;
-
- if (!node_has_online_mem(nid))
- node_start_pfn[nid] = memory_chunk->start_pfn;
-
- if (node_start_pfn[nid] > memory_chunk->start_pfn)
- node_start_pfn[nid] = memory_chunk->start_pfn;
-
- if (node_end_pfn[nid] < memory_chunk->end_pfn)
- node_end_pfn[nid] = memory_chunk->end_pfn;
-
- return 0;
-}
-
-int __init get_memcfg_from_srat(void)
-{
- int i, j, nid;
-
- if (srat_disabled())
- goto out_fail;
-
- if (acpi_numa_init() < 0)
- goto out_fail;
-
- if (num_memory_chunks == 0) {
- printk(KERN_DEBUG
- "could not find any ACPI SRAT memory areas.\n");
- goto out_fail;
- }
-
- /* Calculate total number of nodes in system from PXM bitmap and create
- * a set of sequential node IDs starting at zero. (ACPI doesn't seem
- * to specify the range of _PXM values.)
- */
- /*
- * MCD - we no longer HAVE to number nodes sequentially. PXM domain
- * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
- * 32, so we will continue numbering them in this manner until MAX_NUMNODES
- * approaches MAX_PXM_DOMAINS for i386.
- */
- nodes_clear(node_online_map);
- for (i = 0; i < MAX_PXM_DOMAINS; i++) {
- if (BMAP_TEST(pxm_bitmap, i)) {
- int nid = acpi_map_pxm_to_node(i);
- node_set_online(nid);
- }
- }
- BUG_ON(num_online_nodes() == 0);
-
- /* set cnode id in memory chunk structure */
- for (i = 0; i < num_memory_chunks; i++)
- node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
-
- printk(KERN_DEBUG "pxm bitmap: ");
- for (i = 0; i < sizeof(pxm_bitmap); i++) {
- printk(KERN_CONT "%02x ", pxm_bitmap[i]);
- }
- printk(KERN_CONT "\n");
- printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
- num_online_nodes());
- printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
- num_memory_chunks);
-
- for (i = 0; i < MAX_LOCAL_APIC; i++)
- set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i]));
-
- for (j = 0; j < num_memory_chunks; j++){
- struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
- printk(KERN_DEBUG
- "chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
- j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
- if (node_read_chunk(chunk->nid, chunk))
- continue;
-
- memblock_x86_register_active_regions(chunk->nid, chunk->start_pfn,
- min(chunk->end_pfn, max_pfn));
- }
- /* for out of order entries in SRAT */
- sort_node_map();
-
- for_each_online_node(nid) {
- unsigned long start = node_start_pfn[nid];
- unsigned long end = min(node_end_pfn[nid], max_pfn);
-
- memory_present(nid, start, end);
- node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
- }
- return 1;
-out_fail:
- printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
- " table\n");
- return 0;
-}
diff --git a/arch/x86/net/Makefile b/arch/x86/net/Makefile
new file mode 100644
index 0000000..90568c3
--- /dev/null
+++ b/arch/x86/net/Makefile
@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
new file mode 100644
index 0000000..6687022
--- /dev/null
+++ b/arch/x86/net/bpf_jit.S
@@ -0,0 +1,140 @@
+/* bpf_jit.S : BPF JIT helper functions
+ *
+ * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+/*
+ * Calling convention :
+ * rdi : skb pointer
+ * esi : offset of byte(s) to fetch in skb (can be scratched)
+ * r8 : copy of skb->data
+ * r9d : hlen = skb->len - skb->data_len
+ */
+#define SKBDATA %r8
+
+sk_load_word_ind:
+ .globl sk_load_word_ind
+
+ add %ebx,%esi /* offset += X */
+# test %esi,%esi /* if (offset < 0) goto bpf_error; */
+ js bpf_error
+
+sk_load_word:
+ .globl sk_load_word
+
+ mov %r9d,%eax # hlen
+ sub %esi,%eax # hlen - offset
+ cmp $3,%eax
+ jle bpf_slow_path_word
+ mov (SKBDATA,%rsi),%eax
+ bswap %eax /* ntohl() */
+ ret
+
+
+sk_load_half_ind:
+ .globl sk_load_half_ind
+
+ add %ebx,%esi /* offset += X */
+ js bpf_error
+
+sk_load_half:
+ .globl sk_load_half
+
+ mov %r9d,%eax
+ sub %esi,%eax # hlen - offset
+ cmp $1,%eax
+ jle bpf_slow_path_half
+ movzwl (SKBDATA,%rsi),%eax
+ rol $8,%ax # ntohs()
+ ret
+
+sk_load_byte_ind:
+ .globl sk_load_byte_ind
+ add %ebx,%esi /* offset += X */
+ js bpf_error
+
+sk_load_byte:
+ .globl sk_load_byte
+
+ cmp %esi,%r9d /* if (offset >= hlen) goto bpf_slow_path_byte */
+ jle bpf_slow_path_byte
+ movzbl (SKBDATA,%rsi),%eax
+ ret
+
+/**
+ * sk_load_byte_msh - BPF_S_LDX_B_MSH helper
+ *
+ * Implements BPF_S_LDX_B_MSH : ldxb 4*([offset]&0xf)
+ * Must preserve A accumulator (%eax)
+ * Inputs : %esi is the offset value, already known positive
+ */
+ENTRY(sk_load_byte_msh)
+ CFI_STARTPROC
+ cmp %esi,%r9d /* if (offset >= hlen) goto bpf_slow_path_byte_msh */
+ jle bpf_slow_path_byte_msh
+ movzbl (SKBDATA,%rsi),%ebx
+ and $15,%bl
+ shl $2,%bl
+ ret
+ CFI_ENDPROC
+ENDPROC(sk_load_byte_msh)
+
+bpf_error:
+# force a return 0 from jit handler
+ xor %eax,%eax
+ mov -8(%rbp),%rbx
+ leaveq
+ ret
+
+/* rsi contains offset and can be scratched */
+#define bpf_slow_path_common(LEN) \
+ push %rdi; /* save skb */ \
+ push %r9; \
+ push SKBDATA; \
+/* rsi already has offset */ \
+ mov $LEN,%ecx; /* len */ \
+ lea -12(%rbp),%rdx; \
+ call skb_copy_bits; \
+ test %eax,%eax; \
+ pop SKBDATA; \
+ pop %r9; \
+ pop %rdi
+
+
+bpf_slow_path_word:
+ bpf_slow_path_common(4)
+ js bpf_error
+ mov -12(%rbp),%eax
+ bswap %eax
+ ret
+
+bpf_slow_path_half:
+ bpf_slow_path_common(2)
+ js bpf_error
+ mov -12(%rbp),%ax
+ rol $8,%ax
+ movzwl %ax,%eax
+ ret
+
+bpf_slow_path_byte:
+ bpf_slow_path_common(1)
+ js bpf_error
+ movzbl -12(%rbp),%eax
+ ret
+
+bpf_slow_path_byte_msh:
+ xchg %eax,%ebx /* dont lose A , X is about to be scratched */
+ bpf_slow_path_common(1)
+ js bpf_error
+ movzbl -12(%rbp),%eax
+ and $15,%al
+ shl $2,%al
+ xchg %eax,%ebx
+ ret
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
new file mode 100644
index 0000000..bfab3fa
--- /dev/null
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -0,0 +1,654 @@
+/* bpf_jit_comp.c : BPF JIT compiler
+ *
+ * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/moduleloader.h>
+#include <asm/cacheflush.h>
+#include <linux/netdevice.h>
+#include <linux/filter.h>
+
+/*
+ * Conventions :
+ * EAX : BPF A accumulator
+ * EBX : BPF X accumulator
+ * RDI : pointer to skb (first argument given to JIT function)
+ * RBP : frame pointer (even if CONFIG_FRAME_POINTER=n)
+ * ECX,EDX,ESI : scratch registers
+ * r9d : skb->len - skb->data_len (headlen)
+ * r8 : skb->data
+ * -8(RBP) : saved RBX value
+ * -16(RBP)..-80(RBP) : BPF_MEMWORDS values
+ */
+int bpf_jit_enable __read_mostly;
+
+/*
+ * assembly code in arch/x86/net/bpf_jit.S
+ */
+extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+extern u8 sk_load_word_ind[], sk_load_half_ind[], sk_load_byte_ind[];
+
+static inline u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
+{
+ if (len == 1)
+ *ptr = bytes;
+ else if (len == 2)
+ *(u16 *)ptr = bytes;
+ else {
+ *(u32 *)ptr = bytes;
+ barrier();
+ }
+ return ptr + len;
+}
+
+#define EMIT(bytes, len) do { prog = emit_code(prog, bytes, len); } while (0)
+
+#define EMIT1(b1) EMIT(b1, 1)
+#define EMIT2(b1, b2) EMIT((b1) + ((b2) << 8), 2)
+#define EMIT3(b1, b2, b3) EMIT((b1) + ((b2) << 8) + ((b3) << 16), 3)
+#define EMIT4(b1, b2, b3, b4) EMIT((b1) + ((b2) << 8) + ((b3) << 16) + ((b4) << 24), 4)
+#define EMIT1_off32(b1, off) do { EMIT1(b1); EMIT(off, 4);} while (0)
+
+#define CLEAR_A() EMIT2(0x31, 0xc0) /* xor %eax,%eax */
+#define CLEAR_X() EMIT2(0x31, 0xdb) /* xor %ebx,%ebx */
+
+static inline bool is_imm8(int value)
+{
+ return value <= 127 && value >= -128;
+}
+
+static inline bool is_near(int offset)
+{
+ return offset <= 127 && offset >= -128;
+}
+
+#define EMIT_JMP(offset) \
+do { \
+ if (offset) { \
+ if (is_near(offset)) \
+ EMIT2(0xeb, offset); /* jmp .+off8 */ \
+ else \
+ EMIT1_off32(0xe9, offset); /* jmp .+off32 */ \
+ } \
+} while (0)
+
+/* list of x86 cond jumps opcodes (. + s8)
+ * Add 0x10 (and an extra 0x0f) to generate far jumps (. + s32)
+ */
+#define X86_JB 0x72
+#define X86_JAE 0x73
+#define X86_JE 0x74
+#define X86_JNE 0x75
+#define X86_JBE 0x76
+#define X86_JA 0x77
+
+#define EMIT_COND_JMP(op, offset) \
+do { \
+ if (is_near(offset)) \
+ EMIT2(op, offset); /* jxx .+off8 */ \
+ else { \
+ EMIT2(0x0f, op + 0x10); \
+ EMIT(offset, 4); /* jxx .+off32 */ \
+ } \
+} while (0)
+
+#define COND_SEL(CODE, TOP, FOP) \
+ case CODE: \
+ t_op = TOP; \
+ f_op = FOP; \
+ goto cond_branch
+
+
+#define SEEN_DATAREF 1 /* might call external helpers */
+#define SEEN_XREG 2 /* ebx is used */
+#define SEEN_MEM 4 /* use mem[] for temporary storage */
+
+static inline void bpf_flush_icache(void *start, void *end)
+{
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ smp_wmb();
+ flush_icache_range((unsigned long)start, (unsigned long)end);
+ set_fs(old_fs);
+}
+
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+ u8 temp[64];
+ u8 *prog;
+ unsigned int proglen, oldproglen = 0;
+ int ilen, i;
+ int t_offset, f_offset;
+ u8 t_op, f_op, seen = 0, pass;
+ u8 *image = NULL;
+ u8 *func;
+ int pc_ret0 = -1; /* bpf index of first RET #0 instruction (if any) */
+ unsigned int cleanup_addr; /* epilogue code offset */
+ unsigned int *addrs;
+ const struct sock_filter *filter = fp->insns;
+ int flen = fp->len;
+
+ if (!bpf_jit_enable)
+ return;
+
+ addrs = kmalloc(flen * sizeof(*addrs), GFP_KERNEL);
+ if (addrs == NULL)
+ return;
+
+ /* Before first pass, make a rough estimation of addrs[]
+ * each bpf instruction is translated to less than 64 bytes
+ */
+ for (proglen = 0, i = 0; i < flen; i++) {
+ proglen += 64;
+ addrs[i] = proglen;
+ }
+ cleanup_addr = proglen; /* epilogue address */
+
+ for (pass = 0; pass < 10; pass++) {
+ /* no prologue/epilogue for trivial filters (RET something) */
+ proglen = 0;
+ prog = temp;
+
+ if (seen) {
+ EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */
+ EMIT4(0x48, 0x83, 0xec, 96); /* subq $96,%rsp */
+ /* note : must save %rbx in case bpf_error is hit */
+ if (seen & (SEEN_XREG | SEEN_DATAREF))
+ EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */
+ if (seen & SEEN_XREG)
+ CLEAR_X(); /* make sure we dont leek kernel memory */
+
+ /*
+ * If this filter needs to access skb data,
+ * loads r9 and r8 with :
+ * r9 = skb->len - skb->data_len
+ * r8 = skb->data
+ */
+ if (seen & SEEN_DATAREF) {
+ if (offsetof(struct sk_buff, len) <= 127)
+ /* mov off8(%rdi),%r9d */
+ EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len));
+ else {
+ /* mov off32(%rdi),%r9d */
+ EMIT3(0x44, 0x8b, 0x8f);
+ EMIT(offsetof(struct sk_buff, len), 4);
+ }
+ if (is_imm8(offsetof(struct sk_buff, data_len)))
+ /* sub off8(%rdi),%r9d */
+ EMIT4(0x44, 0x2b, 0x4f, offsetof(struct sk_buff, data_len));
+ else {
+ EMIT3(0x44, 0x2b, 0x8f);
+ EMIT(offsetof(struct sk_buff, data_len), 4);
+ }
+
+ if (is_imm8(offsetof(struct sk_buff, data)))
+ /* mov off8(%rdi),%r8 */
+ EMIT4(0x4c, 0x8b, 0x47, offsetof(struct sk_buff, data));
+ else {
+ /* mov off32(%rdi),%r8 */
+ EMIT3(0x4c, 0x8b, 0x87);
+ EMIT(offsetof(struct sk_buff, data), 4);
+ }
+ }
+ }
+
+ switch (filter[0].code) {
+ case BPF_S_RET_K:
+ case BPF_S_LD_W_LEN:
+ case BPF_S_ANC_PROTOCOL:
+ case BPF_S_ANC_IFINDEX:
+ case BPF_S_ANC_MARK:
+ case BPF_S_ANC_RXHASH:
+ case BPF_S_ANC_CPU:
+ case BPF_S_ANC_QUEUE:
+ case BPF_S_LD_W_ABS:
+ case BPF_S_LD_H_ABS:
+ case BPF_S_LD_B_ABS:
+ /* first instruction sets A register (or is RET 'constant') */
+ break;
+ default:
+ /* make sure we dont leak kernel information to user */
+ CLEAR_A(); /* A = 0 */
+ }
+
+ for (i = 0; i < flen; i++) {
+ unsigned int K = filter[i].k;
+
+ switch (filter[i].code) {
+ case BPF_S_ALU_ADD_X: /* A += X; */
+ seen |= SEEN_XREG;
+ EMIT2(0x01, 0xd8); /* add %ebx,%eax */
+ break;
+ case BPF_S_ALU_ADD_K: /* A += K; */
+ if (!K)
+ break;
+ if (is_imm8(K))
+ EMIT3(0x83, 0xc0, K); /* add imm8,%eax */
+ else
+ EMIT1_off32(0x05, K); /* add imm32,%eax */
+ break;
+ case BPF_S_ALU_SUB_X: /* A -= X; */
+ seen |= SEEN_XREG;
+ EMIT2(0x29, 0xd8); /* sub %ebx,%eax */
+ break;
+ case BPF_S_ALU_SUB_K: /* A -= K */
+ if (!K)
+ break;
+ if (is_imm8(K))
+ EMIT3(0x83, 0xe8, K); /* sub imm8,%eax */
+ else
+ EMIT1_off32(0x2d, K); /* sub imm32,%eax */
+ break;
+ case BPF_S_ALU_MUL_X: /* A *= X; */
+ seen |= SEEN_XREG;
+ EMIT3(0x0f, 0xaf, 0xc3); /* imul %ebx,%eax */
+ break;
+ case BPF_S_ALU_MUL_K: /* A *= K */
+ if (is_imm8(K))
+ EMIT3(0x6b, 0xc0, K); /* imul imm8,%eax,%eax */
+ else {
+ EMIT2(0x69, 0xc0); /* imul imm32,%eax */
+ EMIT(K, 4);
+ }
+ break;
+ case BPF_S_ALU_DIV_X: /* A /= X; */
+ seen |= SEEN_XREG;
+ EMIT2(0x85, 0xdb); /* test %ebx,%ebx */
+ if (pc_ret0 != -1)
+ EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4));
+ else {
+ EMIT_COND_JMP(X86_JNE, 2 + 5);
+ CLEAR_A();
+ EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */
+ }
+ EMIT4(0x31, 0xd2, 0xf7, 0xf3); /* xor %edx,%edx; div %ebx */
+ break;
+ case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
+ EMIT3(0x48, 0x69, 0xc0); /* imul imm32,%rax,%rax */
+ EMIT(K, 4);
+ EMIT4(0x48, 0xc1, 0xe8, 0x20); /* shr $0x20,%rax */
+ break;
+ case BPF_S_ALU_AND_X:
+ seen |= SEEN_XREG;
+ EMIT2(0x21, 0xd8); /* and %ebx,%eax */
+ break;
+ case BPF_S_ALU_AND_K:
+ if (K >= 0xFFFFFF00) {
+ EMIT2(0x24, K & 0xFF); /* and imm8,%al */
+ } else if (K >= 0xFFFF0000) {
+ EMIT2(0x66, 0x25); /* and imm16,%ax */
+ EMIT2(K, 2);
+ } else {
+ EMIT1_off32(0x25, K); /* and imm32,%eax */
+ }
+ break;
+ case BPF_S_ALU_OR_X:
+ seen |= SEEN_XREG;
+ EMIT2(0x09, 0xd8); /* or %ebx,%eax */
+ break;
+ case BPF_S_ALU_OR_K:
+ if (is_imm8(K))
+ EMIT3(0x83, 0xc8, K); /* or imm8,%eax */
+ else
+ EMIT1_off32(0x0d, K); /* or imm32,%eax */
+ break;
+ case BPF_S_ALU_LSH_X: /* A <<= X; */
+ seen |= SEEN_XREG;
+ EMIT4(0x89, 0xd9, 0xd3, 0xe0); /* mov %ebx,%ecx; shl %cl,%eax */
+ break;
+ case BPF_S_ALU_LSH_K:
+ if (K == 0)
+ break;
+ else if (K == 1)
+ EMIT2(0xd1, 0xe0); /* shl %eax */
+ else
+ EMIT3(0xc1, 0xe0, K);
+ break;
+ case BPF_S_ALU_RSH_X: /* A >>= X; */
+ seen |= SEEN_XREG;
+ EMIT4(0x89, 0xd9, 0xd3, 0xe8); /* mov %ebx,%ecx; shr %cl,%eax */
+ break;
+ case BPF_S_ALU_RSH_K: /* A >>= K; */
+ if (K == 0)
+ break;
+ else if (K == 1)
+ EMIT2(0xd1, 0xe8); /* shr %eax */
+ else
+ EMIT3(0xc1, 0xe8, K);
+ break;
+ case BPF_S_ALU_NEG:
+ EMIT2(0xf7, 0xd8); /* neg %eax */
+ break;
+ case BPF_S_RET_K:
+ if (!K) {
+ if (pc_ret0 == -1)
+ pc_ret0 = i;
+ CLEAR_A();
+ } else {
+ EMIT1_off32(0xb8, K); /* mov $imm32,%eax */
+ }
+ /* fallinto */
+ case BPF_S_RET_A:
+ if (seen) {
+ if (i != flen - 1) {
+ EMIT_JMP(cleanup_addr - addrs[i]);
+ break;
+ }
+ if (seen & SEEN_XREG)
+ EMIT4(0x48, 0x8b, 0x5d, 0xf8); /* mov -8(%rbp),%rbx */
+ EMIT1(0xc9); /* leaveq */
+ }
+ EMIT1(0xc3); /* ret */
+ break;
+ case BPF_S_MISC_TAX: /* X = A */
+ seen |= SEEN_XREG;
+ EMIT2(0x89, 0xc3); /* mov %eax,%ebx */
+ break;
+ case BPF_S_MISC_TXA: /* A = X */
+ seen |= SEEN_XREG;
+ EMIT2(0x89, 0xd8); /* mov %ebx,%eax */
+ break;
+ case BPF_S_LD_IMM: /* A = K */
+ if (!K)
+ CLEAR_A();
+ else
+ EMIT1_off32(0xb8, K); /* mov $imm32,%eax */
+ break;
+ case BPF_S_LDX_IMM: /* X = K */
+ seen |= SEEN_XREG;
+ if (!K)
+ CLEAR_X();
+ else
+ EMIT1_off32(0xbb, K); /* mov $imm32,%ebx */
+ break;
+ case BPF_S_LD_MEM: /* A = mem[K] : mov off8(%rbp),%eax */
+ seen |= SEEN_MEM;
+ EMIT3(0x8b, 0x45, 0xf0 - K*4);
+ break;
+ case BPF_S_LDX_MEM: /* X = mem[K] : mov off8(%rbp),%ebx */
+ seen |= SEEN_XREG | SEEN_MEM;
+ EMIT3(0x8b, 0x5d, 0xf0 - K*4);
+ break;
+ case BPF_S_ST: /* mem[K] = A : mov %eax,off8(%rbp) */
+ seen |= SEEN_MEM;
+ EMIT3(0x89, 0x45, 0xf0 - K*4);
+ break;
+ case BPF_S_STX: /* mem[K] = X : mov %ebx,off8(%rbp) */
+ seen |= SEEN_XREG | SEEN_MEM;
+ EMIT3(0x89, 0x5d, 0xf0 - K*4);
+ break;
+ case BPF_S_LD_W_LEN: /* A = skb->len; */
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
+ if (is_imm8(offsetof(struct sk_buff, len)))
+ /* mov off8(%rdi),%eax */
+ EMIT3(0x8b, 0x47, offsetof(struct sk_buff, len));
+ else {
+ EMIT2(0x8b, 0x87);
+ EMIT(offsetof(struct sk_buff, len), 4);
+ }
+ break;
+ case BPF_S_LDX_W_LEN: /* X = skb->len; */
+ seen |= SEEN_XREG;
+ if (is_imm8(offsetof(struct sk_buff, len)))
+ /* mov off8(%rdi),%ebx */
+ EMIT3(0x8b, 0x5f, offsetof(struct sk_buff, len));
+ else {
+ EMIT2(0x8b, 0x9f);
+ EMIT(offsetof(struct sk_buff, len), 4);
+ }
+ break;
+ case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, protocol) != 2);
+ if (is_imm8(offsetof(struct sk_buff, protocol))) {
+ /* movzwl off8(%rdi),%eax */
+ EMIT4(0x0f, 0xb7, 0x47, offsetof(struct sk_buff, protocol));
+ } else {
+ EMIT3(0x0f, 0xb7, 0x87); /* movzwl off32(%rdi),%eax */
+ EMIT(offsetof(struct sk_buff, protocol), 4);
+ }
+ EMIT2(0x86, 0xc4); /* ntohs() : xchg %al,%ah */
+ break;
+ case BPF_S_ANC_IFINDEX:
+ if (is_imm8(offsetof(struct sk_buff, dev))) {
+ /* movq off8(%rdi),%rax */
+ EMIT4(0x48, 0x8b, 0x47, offsetof(struct sk_buff, dev));
+ } else {
+ EMIT3(0x48, 0x8b, 0x87); /* movq off32(%rdi),%rax */
+ EMIT(offsetof(struct sk_buff, dev), 4);
+ }
+ EMIT3(0x48, 0x85, 0xc0); /* test %rax,%rax */
+ EMIT_COND_JMP(X86_JE, cleanup_addr - (addrs[i] - 6));
+ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
+ EMIT2(0x8b, 0x80); /* mov off32(%rax),%eax */
+ EMIT(offsetof(struct net_device, ifindex), 4);
+ break;
+ case BPF_S_ANC_MARK:
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
+ if (is_imm8(offsetof(struct sk_buff, mark))) {
+ /* mov off8(%rdi),%eax */
+ EMIT3(0x8b, 0x47, offsetof(struct sk_buff, mark));
+ } else {
+ EMIT2(0x8b, 0x87);
+ EMIT(offsetof(struct sk_buff, mark), 4);
+ }
+ break;
+ case BPF_S_ANC_RXHASH:
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
+ if (is_imm8(offsetof(struct sk_buff, rxhash))) {
+ /* mov off8(%rdi),%eax */
+ EMIT3(0x8b, 0x47, offsetof(struct sk_buff, rxhash));
+ } else {
+ EMIT2(0x8b, 0x87);
+ EMIT(offsetof(struct sk_buff, rxhash), 4);
+ }
+ break;
+ case BPF_S_ANC_QUEUE:
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, queue_mapping) != 2);
+ if (is_imm8(offsetof(struct sk_buff, queue_mapping))) {
+ /* movzwl off8(%rdi),%eax */
+ EMIT4(0x0f, 0xb7, 0x47, offsetof(struct sk_buff, queue_mapping));
+ } else {
+ EMIT3(0x0f, 0xb7, 0x87); /* movzwl off32(%rdi),%eax */
+ EMIT(offsetof(struct sk_buff, queue_mapping), 4);
+ }
+ break;
+ case BPF_S_ANC_CPU:
+#ifdef CONFIG_SMP
+ EMIT4(0x65, 0x8b, 0x04, 0x25); /* mov %gs:off32,%eax */
+ EMIT((u32)(unsigned long)&cpu_number, 4); /* A = smp_processor_id(); */
+#else
+ CLEAR_A();
+#endif
+ break;
+ case BPF_S_LD_W_ABS:
+ func = sk_load_word;
+common_load: seen |= SEEN_DATAREF;
+ if ((int)K < 0)
+ goto out;
+ t_offset = func - (image + addrs[i]);
+ EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+ EMIT1_off32(0xe8, t_offset); /* call */
+ break;
+ case BPF_S_LD_H_ABS:
+ func = sk_load_half;
+ goto common_load;
+ case BPF_S_LD_B_ABS:
+ func = sk_load_byte;
+ goto common_load;
+ case BPF_S_LDX_B_MSH:
+ if ((int)K < 0) {
+ if (pc_ret0 != -1) {
+ EMIT_JMP(addrs[pc_ret0] - addrs[i]);
+ break;
+ }
+ CLEAR_A();
+ EMIT_JMP(cleanup_addr - addrs[i]);
+ break;
+ }
+ seen |= SEEN_DATAREF | SEEN_XREG;
+ t_offset = sk_load_byte_msh - (image + addrs[i]);
+ EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+ EMIT1_off32(0xe8, t_offset); /* call sk_load_byte_msh */
+ break;
+ case BPF_S_LD_W_IND:
+ func = sk_load_word_ind;
+common_load_ind: seen |= SEEN_DATAREF | SEEN_XREG;
+ t_offset = func - (image + addrs[i]);
+ EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+ EMIT1_off32(0xe8, t_offset); /* call sk_load_xxx_ind */
+ break;
+ case BPF_S_LD_H_IND:
+ func = sk_load_half_ind;
+ goto common_load_ind;
+ case BPF_S_LD_B_IND:
+ func = sk_load_byte_ind;
+ goto common_load_ind;
+ case BPF_S_JMP_JA:
+ t_offset = addrs[i + K] - addrs[i];
+ EMIT_JMP(t_offset);
+ break;
+ COND_SEL(BPF_S_JMP_JGT_K, X86_JA, X86_JBE);
+ COND_SEL(BPF_S_JMP_JGE_K, X86_JAE, X86_JB);
+ COND_SEL(BPF_S_JMP_JEQ_K, X86_JE, X86_JNE);
+ COND_SEL(BPF_S_JMP_JSET_K,X86_JNE, X86_JE);
+ COND_SEL(BPF_S_JMP_JGT_X, X86_JA, X86_JBE);
+ COND_SEL(BPF_S_JMP_JGE_X, X86_JAE, X86_JB);
+ COND_SEL(BPF_S_JMP_JEQ_X, X86_JE, X86_JNE);
+ COND_SEL(BPF_S_JMP_JSET_X,X86_JNE, X86_JE);
+
+cond_branch: f_offset = addrs[i + filter[i].jf] - addrs[i];
+ t_offset = addrs[i + filter[i].jt] - addrs[i];
+
+ /* same targets, can avoid doing the test :) */
+ if (filter[i].jt == filter[i].jf) {
+ EMIT_JMP(t_offset);
+ break;
+ }
+
+ switch (filter[i].code) {
+ case BPF_S_JMP_JGT_X:
+ case BPF_S_JMP_JGE_X:
+ case BPF_S_JMP_JEQ_X:
+ seen |= SEEN_XREG;
+ EMIT2(0x39, 0xd8); /* cmp %ebx,%eax */
+ break;
+ case BPF_S_JMP_JSET_X:
+ seen |= SEEN_XREG;
+ EMIT2(0x85, 0xd8); /* test %ebx,%eax */
+ break;
+ case BPF_S_JMP_JEQ_K:
+ if (K == 0) {
+ EMIT2(0x85, 0xc0); /* test %eax,%eax */
+ break;
+ }
+ case BPF_S_JMP_JGT_K:
+ case BPF_S_JMP_JGE_K:
+ if (K <= 127)
+ EMIT3(0x83, 0xf8, K); /* cmp imm8,%eax */
+ else
+ EMIT1_off32(0x3d, K); /* cmp imm32,%eax */
+ break;
+ case BPF_S_JMP_JSET_K:
+ if (K <= 0xFF)
+ EMIT2(0xa8, K); /* test imm8,%al */
+ else if (!(K & 0xFFFF00FF))
+ EMIT3(0xf6, 0xc4, K >> 8); /* test imm8,%ah */
+ else if (K <= 0xFFFF) {
+ EMIT2(0x66, 0xa9); /* test imm16,%ax */
+ EMIT(K, 2);
+ } else {
+ EMIT1_off32(0xa9, K); /* test imm32,%eax */
+ }
+ break;
+ }
+ if (filter[i].jt != 0) {
+ if (filter[i].jf)
+ t_offset += is_near(f_offset) ? 2 : 6;
+ EMIT_COND_JMP(t_op, t_offset);
+ if (filter[i].jf)
+ EMIT_JMP(f_offset);
+ break;
+ }
+ EMIT_COND_JMP(f_op, f_offset);
+ break;
+ default:
+ /* hmm, too complex filter, give up with jit compiler */
+ goto out;
+ }
+ ilen = prog - temp;
+ if (image) {
+ if (unlikely(proglen + ilen > oldproglen)) {
+ pr_err("bpb_jit_compile fatal error\n");
+ kfree(addrs);
+ module_free(NULL, image);
+ return;
+ }
+ memcpy(image + proglen, temp, ilen);
+ }
+ proglen += ilen;
+ addrs[i] = proglen;
+ prog = temp;
+ }
+ /* last bpf instruction is always a RET :
+ * use it to give the cleanup instruction(s) addr
+ */
+ cleanup_addr = proglen - 1; /* ret */
+ if (seen)
+ cleanup_addr -= 1; /* leaveq */
+ if (seen & SEEN_XREG)
+ cleanup_addr -= 4; /* mov -8(%rbp),%rbx */
+
+ if (image) {
+ WARN_ON(proglen != oldproglen);
+ break;
+ }
+ if (proglen == oldproglen) {
+ image = module_alloc(max_t(unsigned int,
+ proglen,
+ sizeof(struct work_struct)));
+ if (!image)
+ goto out;
+ }
+ oldproglen = proglen;
+ }
+ if (bpf_jit_enable > 1)
+ pr_err("flen=%d proglen=%u pass=%d image=%p\n",
+ flen, proglen, pass, image);
+
+ if (image) {
+ if (bpf_jit_enable > 1)
+ print_hex_dump(KERN_ERR, "JIT code: ", DUMP_PREFIX_ADDRESS,
+ 16, 1, image, proglen, false);
+
+ bpf_flush_icache(image, image + proglen);
+
+ fp->bpf_func = (void *)image;
+ }
+out:
+ kfree(addrs);
+ return;
+}
+
+static void jit_free_defer(struct work_struct *arg)
+{
+ module_free(NULL, arg);
+}
+
+/* run from softirq, we must use a work_struct to call
+ * module_free() from process context
+ */
+void bpf_jit_free(struct sk_filter *fp)
+{
+ if (fp->bpf_func != sk_run_filter) {
+ struct work_struct *work = (struct work_struct *)fp->bpf_func;
+
+ INIT_WORK(work, jit_free_defer);
+ schedule_work(work);
+ }
+}
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 2d49d4e..a5b64ab 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -16,17 +16,6 @@
#include <asm/stacktrace.h>
#include <linux/compat.h>
-static void backtrace_warning_symbol(void *data, char *msg,
- unsigned long symbol)
-{
- /* Ignore warnings */
-}
-
-static void backtrace_warning(void *data, char *msg)
-{
- /* Ignore warnings */
-}
-
static int backtrace_stack(void *data, char *name)
{
/* Yes, we want all stacks */
@@ -42,8 +31,6 @@
}
static struct stacktrace_ops backtrace_ops = {
- .warning = backtrace_warning,
- .warning_symbol = backtrace_warning_symbol,
.stack = backtrace_stack,
.address = backtrace_address,
.walk_stack = print_context_stack,
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index e37b407..8214724 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -108,7 +108,8 @@
}
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, 0,
(type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi");
+ "msi-x" : "msi",
+ DOMID_SELF);
if (irq < 0)
goto error;
dev_dbg(&dev->dev,
@@ -148,7 +149,8 @@
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" :
- "pcifront-msi");
+ "pcifront-msi",
+ DOMID_SELF);
if (irq < 0)
goto free;
i++;
@@ -190,9 +192,16 @@
list_for_each_entry(msidesc, &dev->msi_list, list) {
struct physdev_map_pirq map_irq;
+ domid_t domid;
+
+ domid = ret = xen_find_device_domain_owner(dev);
+ /* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
+ * hence check ret value for < 0. */
+ if (ret < 0)
+ domid = DOMID_SELF;
memset(&map_irq, 0, sizeof(map_irq));
- map_irq.domid = DOMID_SELF;
+ map_irq.domid = domid;
map_irq.type = MAP_PIRQ_TYPE_MSI;
map_irq.index = -1;
map_irq.pirq = -1;
@@ -215,14 +224,16 @@
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
if (ret) {
- dev_warn(&dev->dev, "xen map irq failed %d\n", ret);
+ dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
+ ret, domid);
goto out;
}
ret = xen_bind_pirq_msi_to_irq(dev, msidesc,
map_irq.pirq, map_irq.index,
(type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi");
+ "msi-x" : "msi",
+ domid);
if (ret < 0)
goto out;
}
@@ -461,3 +472,78 @@
}
}
#endif
+
+#ifdef CONFIG_XEN_DOM0
+struct xen_device_domain_owner {
+ domid_t domain;
+ struct pci_dev *dev;
+ struct list_head list;
+};
+
+static DEFINE_SPINLOCK(dev_domain_list_spinlock);
+static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
+
+static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+
+ list_for_each_entry(owner, &dev_domain_list, list) {
+ if (owner->dev == dev)
+ return owner;
+ }
+ return NULL;
+}
+
+int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+ int domain = -ENODEV;
+
+ spin_lock(&dev_domain_list_spinlock);
+ owner = find_device(dev);
+ if (owner)
+ domain = owner->domain;
+ spin_unlock(&dev_domain_list_spinlock);
+ return domain;
+}
+EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
+
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
+{
+ struct xen_device_domain_owner *owner;
+
+ owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
+ if (!owner)
+ return -ENODEV;
+
+ spin_lock(&dev_domain_list_spinlock);
+ if (find_device(dev)) {
+ spin_unlock(&dev_domain_list_spinlock);
+ kfree(owner);
+ return -EEXIST;
+ }
+ owner->domain = domain;
+ owner->dev = dev;
+ list_add_tail(&owner->list, &dev_domain_list);
+ spin_unlock(&dev_domain_list_spinlock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
+
+int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+
+ spin_lock(&dev_domain_list_spinlock);
+ owner = find_device(dev);
+ if (!owner) {
+ spin_unlock(&dev_domain_list_spinlock);
+ return -ENODEV;
+ }
+ list_del(&owner->list);
+ spin_unlock(&dev_domain_list_spinlock);
+ kfree(owner);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
+#endif
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 0fe27d7..b30aa26 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -145,17 +145,6 @@
data_size, data);
}
-static efi_status_t virt_efi_set_virtual_address_map(
- unsigned long memory_map_size,
- unsigned long descriptor_size,
- u32 descriptor_version,
- efi_memory_desc_t *virtual_map)
-{
- return efi_call_virt4(set_virtual_address_map,
- memory_map_size, descriptor_size,
- descriptor_version, virtual_map);
-}
-
static efi_status_t __init phys_efi_set_virtual_address_map(
unsigned long memory_map_size,
unsigned long descriptor_size,
@@ -468,11 +457,25 @@
#endif
}
+void __init efi_set_executable(efi_memory_desc_t *md, bool executable)
+{
+ u64 addr, npages;
+
+ addr = md->virt_addr;
+ npages = md->num_pages;
+
+ memrange_efi_to_native(&addr, &npages);
+
+ if (executable)
+ set_memory_x(addr, npages);
+ else
+ set_memory_nx(addr, npages);
+}
+
static void __init runtime_code_page_mkexec(void)
{
efi_memory_desc_t *md;
void *p;
- u64 addr, npages;
/* Make EFI runtime service code area executable */
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
@@ -481,10 +484,7 @@
if (md->type != EFI_RUNTIME_SERVICES_CODE)
continue;
- addr = md->virt_addr;
- npages = md->num_pages;
- memrange_efi_to_native(&addr, &npages);
- set_memory_x(addr, npages);
+ efi_set_executable(md, true);
}
}
@@ -498,13 +498,42 @@
*/
void __init efi_enter_virtual_mode(void)
{
- efi_memory_desc_t *md;
+ efi_memory_desc_t *md, *prev_md = NULL;
efi_status_t status;
unsigned long size;
u64 end, systab, addr, npages, end_pfn;
- void *p, *va;
+ void *p, *va, *new_memmap = NULL;
+ int count = 0;
efi.systab = NULL;
+
+ /* Merge contiguous regions of the same type and attribute */
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ u64 prev_size;
+ md = p;
+
+ if (!prev_md) {
+ prev_md = md;
+ continue;
+ }
+
+ if (prev_md->type != md->type ||
+ prev_md->attribute != md->attribute) {
+ prev_md = md;
+ continue;
+ }
+
+ prev_size = prev_md->num_pages << EFI_PAGE_SHIFT;
+
+ if (md->phys_addr == (prev_md->phys_addr + prev_size)) {
+ prev_md->num_pages += md->num_pages;
+ md->type = EFI_RESERVED_TYPE;
+ md->attribute = 0;
+ continue;
+ }
+ prev_md = md;
+ }
+
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
md = p;
if (!(md->attribute & EFI_MEMORY_RUNTIME))
@@ -541,15 +570,21 @@
systab += md->virt_addr - md->phys_addr;
efi.systab = (efi_system_table_t *) (unsigned long) systab;
}
+ new_memmap = krealloc(new_memmap,
+ (count + 1) * memmap.desc_size,
+ GFP_KERNEL);
+ memcpy(new_memmap + (count * memmap.desc_size), md,
+ memmap.desc_size);
+ count++;
}
BUG_ON(!efi.systab);
status = phys_efi_set_virtual_address_map(
- memmap.desc_size * memmap.nr_map,
+ memmap.desc_size * count,
memmap.desc_size,
memmap.desc_version,
- memmap.phys_map);
+ (efi_memory_desc_t *)__pa(new_memmap));
if (status != EFI_SUCCESS) {
printk(KERN_ALERT "Unable to switch EFI into virtual mode "
@@ -572,11 +607,12 @@
efi.set_variable = virt_efi_set_variable;
efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
efi.reset_system = virt_efi_reset_system;
- efi.set_virtual_address_map = virt_efi_set_virtual_address_map;
+ efi.set_virtual_address_map = NULL;
if (__supported_pte_mask & _PAGE_NX)
runtime_code_page_mkexec();
early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
memmap.map = NULL;
+ kfree(new_memmap);
}
/*
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index ac0621a..2649426 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -41,22 +41,7 @@
static pgd_t save_pgd __initdata;
static unsigned long efi_flags __initdata;
-static void __init early_mapping_set_exec(unsigned long start,
- unsigned long end,
- int executable)
-{
- unsigned long num_pages;
-
- start &= PMD_MASK;
- end = (end + PMD_SIZE - 1) & PMD_MASK;
- num_pages = (end - start) >> PAGE_SHIFT;
- if (executable)
- set_memory_x((unsigned long)__va(start), num_pages);
- else
- set_memory_nx((unsigned long)__va(start), num_pages);
-}
-
-static void __init early_runtime_code_mapping_set_exec(int executable)
+static void __init early_code_mapping_set_exec(int executable)
{
efi_memory_desc_t *md;
void *p;
@@ -67,11 +52,8 @@
/* Make EFI runtime service code area executable */
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
md = p;
- if (md->type == EFI_RUNTIME_SERVICES_CODE) {
- unsigned long end;
- end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
- early_mapping_set_exec(md->phys_addr, end, executable);
- }
+ if (md->type == EFI_RUNTIME_SERVICES_CODE)
+ efi_set_executable(md, executable);
}
}
@@ -79,7 +61,7 @@
{
unsigned long vaddress;
- early_runtime_code_mapping_set_exec(1);
+ early_code_mapping_set_exec(1);
local_irq_save(efi_flags);
vaddress = (unsigned long)__va(0x0UL);
save_pgd = *pgd_offset_k(0x0UL);
@@ -95,7 +77,7 @@
set_pgd(pgd_offset_k(0x0UL), save_pgd);
__flush_tlb_all();
local_irq_restore(efi_flags);
- early_runtime_code_mapping_set_exec(0);
+ early_code_mapping_set_exec(0);
}
void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
@@ -107,8 +89,10 @@
return ioremap(phys_addr, size);
last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
- if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
- return NULL;
+ if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
+ unsigned long top = last_map_pfn << PAGE_SHIFT;
+ efi_ioremap(top, size - (top - phys_addr), type);
+ }
return (void __iomem *)__va(phys_addr);
}
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 275dbc1..7000e74b 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -194,7 +194,7 @@
return 0;
}
-void __init mrst_time_init(void)
+static void __init mrst_time_init(void)
{
sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
switch (mrst_timer_options) {
@@ -216,7 +216,7 @@
apbt_time_init();
}
-void __cpuinit mrst_arch_setup(void)
+static void __cpuinit mrst_arch_setup(void)
{
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile
index c2a8cab..81c5e21 100644
--- a/arch/x86/platform/olpc/Makefile
+++ b/arch/x86/platform/olpc/Makefile
@@ -1,4 +1,2 @@
-obj-$(CONFIG_OLPC) += olpc.o
+obj-$(CONFIG_OLPC) += olpc.o olpc_ofw.o olpc_dt.o
obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o
-obj-$(CONFIG_OLPC) += olpc_ofw.o
-obj-$(CONFIG_OF_PROMTREE) += olpc_dt.o
diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
index edaf3fe..0060fd59e 100644
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c
@@ -18,6 +18,7 @@
#include <linux/io.h>
#include <linux/string.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <asm/geode.h>
#include <asm/setup.h>
@@ -187,41 +188,43 @@
}
EXPORT_SYMBOL_GPL(olpc_ec_cmd);
-static bool __init check_ofw_architecture(void)
+static bool __init check_ofw_architecture(struct device_node *root)
{
- size_t propsize;
- char olpc_arch[5];
- const void *args[] = { NULL, "architecture", olpc_arch, (void *)5 };
- void *res[] = { &propsize };
+ const char *olpc_arch;
+ int propsize;
- if (olpc_ofw("getprop", args, res)) {
- printk(KERN_ERR "ofw: getprop call failed!\n");
- return false;
- }
+ olpc_arch = of_get_property(root, "architecture", &propsize);
return propsize == 5 && strncmp("OLPC", olpc_arch, 5) == 0;
}
-static u32 __init get_board_revision(void)
+static u32 __init get_board_revision(struct device_node *root)
{
- size_t propsize;
- __be32 rev;
- const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 };
- void *res[] = { &propsize };
+ int propsize;
+ const __be32 *rev;
- if (olpc_ofw("getprop", args, res) || propsize != 4) {
- printk(KERN_ERR "ofw: getprop call failed!\n");
- return cpu_to_be32(0);
- }
- return be32_to_cpu(rev);
+ rev = of_get_property(root, "board-revision-int", &propsize);
+ if (propsize != 4)
+ return 0;
+
+ return be32_to_cpu(*rev);
}
static bool __init platform_detect(void)
{
- if (!check_ofw_architecture())
+ struct device_node *root = of_find_node_by_path("/");
+ bool success;
+
+ if (!root)
return false;
- olpc_platform_info.flags |= OLPC_F_PRESENT;
- olpc_platform_info.boardrev = get_board_revision();
- return true;
+
+ success = check_ofw_architecture(root);
+ if (success) {
+ olpc_platform_info.boardrev = get_board_revision(root);
+ olpc_platform_info.flags |= OLPC_F_PRESENT;
+ }
+
+ of_node_put(root);
+ return success;
}
static int __init add_xo1_platform_devices(void)
diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c
index 044bda5..d39f63d 100644
--- a/arch/x86/platform/olpc/olpc_dt.c
+++ b/arch/x86/platform/olpc/olpc_dt.c
@@ -19,7 +19,9 @@
#include <linux/kernel.h>
#include <linux/bootmem.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/of_pdt.h>
+#include <asm/olpc.h>
#include <asm/olpc_ofw.h>
static phandle __init olpc_dt_getsibling(phandle node)
@@ -180,3 +182,20 @@
pr_info("PROM DT: Built device tree with %u bytes of memory.\n",
prom_early_allocated);
}
+
+/* A list of DT node/bus matches that we want to expose as platform devices */
+static struct of_device_id __initdata of_ids[] = {
+ { .compatible = "olpc,xo1-battery" },
+ { .compatible = "olpc,xo1-dcon" },
+ { .compatible = "olpc,xo1-rtc" },
+ {},
+};
+
+static int __init olpc_create_platform_devices(void)
+{
+ if (machine_is_olpc())
+ return of_platform_bus_probe(NULL, of_ids, NULL);
+ else
+ return 0;
+}
+device_initcall(olpc_create_platform_devices);
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 7cb6424..c58e0ea 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -699,16 +699,17 @@
struct mm_struct *mm,
unsigned long va, unsigned int cpu)
{
- int tcpu;
- int uvhub;
int locals = 0;
int remotes = 0;
int hubs = 0;
+ int tcpu;
+ int tpnode;
struct bau_desc *bau_desc;
struct cpumask *flush_mask;
struct ptc_stats *stat;
struct bau_control *bcp;
struct bau_control *tbcp;
+ struct hub_and_pnode *hpp;
/* kernel was booted 'nobau' */
if (nobau)
@@ -750,11 +751,18 @@
bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu;
bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
- /* cpu statistics */
for_each_cpu(tcpu, flush_mask) {
- uvhub = uv_cpu_to_blade_id(tcpu);
- bau_uvhub_set(uvhub, &bau_desc->distribution);
- if (uvhub == bcp->uvhub)
+ /*
+ * The distribution vector is a bit map of pnodes, relative
+ * to the partition base pnode (and the partition base nasid
+ * in the header).
+ * Translate cpu to pnode and hub using an array stored
+ * in local memory.
+ */
+ hpp = &bcp->socket_master->target_hub_and_pnode[tcpu];
+ tpnode = hpp->pnode - bcp->partition_base_pnode;
+ bau_uvhub_set(tpnode, &bau_desc->distribution);
+ if (hpp->uvhub == bcp->uvhub)
locals++;
else
remotes++;
@@ -855,7 +863,7 @@
* an interrupt, but causes an error message to be returned to
* the sender.
*/
-static void uv_enable_timeouts(void)
+static void __init uv_enable_timeouts(void)
{
int uvhub;
int nuvhubs;
@@ -1326,10 +1334,10 @@
}
/*
- * initialize the sending side's sending buffers
+ * Initialize the sending side's sending buffers.
*/
static void
-uv_activation_descriptor_init(int node, int pnode)
+uv_activation_descriptor_init(int node, int pnode, int base_pnode)
{
int i;
int cpu;
@@ -1352,11 +1360,11 @@
n = pa >> uv_nshift;
m = pa & uv_mmask;
+ /* the 14-bit pnode */
uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
(n << UV_DESC_BASE_PNODE_SHIFT | m));
-
/*
- * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
+ * Initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
* cpu even though we only use the first one; one descriptor can
* describe a broadcast to 256 uv hubs.
*/
@@ -1365,12 +1373,13 @@
memset(bd2, 0, sizeof(struct bau_desc));
bd2->header.sw_ack_flag = 1;
/*
- * base_dest_nodeid is the nasid of the first uvhub
- * in the partition. The bit map will indicate uvhub numbers,
- * which are 0-N in a partition. Pnodes are unique system-wide.
+ * The base_dest_nasid set in the message header is the nasid
+ * of the first uvhub in the partition. The bit map will
+ * indicate destination pnode numbers relative to that base.
+ * They may not be consecutive if nasid striding is being used.
*/
- bd2->header.base_dest_nodeid = UV_PNODE_TO_NASID(uv_partition_base_pnode);
- bd2->header.dest_subnodeid = 0x10; /* the LB */
+ bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
+ bd2->header.dest_subnodeid = UV_LB_SUBNODEID;
bd2->header.command = UV_NET_ENDPOINT_INTD;
bd2->header.int_both = 1;
/*
@@ -1442,7 +1451,7 @@
/*
* Initialization of each UV hub's structures
*/
-static void __init uv_init_uvhub(int uvhub, int vector)
+static void __init uv_init_uvhub(int uvhub, int vector, int base_pnode)
{
int node;
int pnode;
@@ -1450,11 +1459,11 @@
node = uvhub_to_first_node(uvhub);
pnode = uv_blade_to_pnode(uvhub);
- uv_activation_descriptor_init(node, pnode);
+ uv_activation_descriptor_init(node, pnode, base_pnode);
uv_payload_queue_init(node, pnode);
/*
- * the below initialization can't be in firmware because the
- * messaging IRQ will be determined by the OS
+ * The below initialization can't be in firmware because the
+ * messaging IRQ will be determined by the OS.
*/
apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -1491,10 +1500,11 @@
/*
* initialize the bau_control structure for each cpu
*/
-static int __init uv_init_per_cpu(int nuvhubs)
+static int __init uv_init_per_cpu(int nuvhubs, int base_part_pnode)
{
int i;
int cpu;
+ int tcpu;
int pnode;
int uvhub;
int have_hmaster;
@@ -1528,6 +1538,15 @@
bcp = &per_cpu(bau_control, cpu);
memset(bcp, 0, sizeof(struct bau_control));
pnode = uv_cpu_hub_info(cpu)->pnode;
+ if ((pnode - base_part_pnode) >= UV_DISTRIBUTION_SIZE) {
+ printk(KERN_EMERG
+ "cpu %d pnode %d-%d beyond %d; BAU disabled\n",
+ cpu, pnode, base_part_pnode,
+ UV_DISTRIBUTION_SIZE);
+ return 1;
+ }
+ bcp->osnode = cpu_to_node(cpu);
+ bcp->partition_base_pnode = uv_partition_base_pnode;
uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
*(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8));
bdp = &uvhub_descs[uvhub];
@@ -1536,7 +1555,7 @@
bdp->pnode = pnode;
/* kludge: 'assuming' one node per socket, and assuming that
disabling a socket just leaves a gap in node numbers */
- socket = (cpu_to_node(cpu) & 1);
+ socket = bcp->osnode & 1;
bdp->socket_mask |= (1 << socket);
sdp = &bdp->socket[socket];
sdp->cpu_number[sdp->num_cpus] = cpu;
@@ -1585,6 +1604,20 @@
nextsocket:
socket++;
socket_mask = (socket_mask >> 1);
+ /* each socket gets a local array of pnodes/hubs */
+ bcp = smaster;
+ bcp->target_hub_and_pnode = kmalloc_node(
+ sizeof(struct hub_and_pnode) *
+ num_possible_cpus(), GFP_KERNEL, bcp->osnode);
+ memset(bcp->target_hub_and_pnode, 0,
+ sizeof(struct hub_and_pnode) *
+ num_possible_cpus());
+ for_each_present_cpu(tcpu) {
+ bcp->target_hub_and_pnode[tcpu].pnode =
+ uv_cpu_hub_info(tcpu)->pnode;
+ bcp->target_hub_and_pnode[tcpu].uvhub =
+ uv_cpu_hub_info(tcpu)->numa_blade_id;
+ }
}
}
kfree(uvhub_descs);
@@ -1637,21 +1670,22 @@
spin_lock_init(&disable_lock);
congested_cycles = microsec_2_cycles(congested_response_us);
- if (uv_init_per_cpu(nuvhubs)) {
+ uv_partition_base_pnode = 0x7fffffff;
+ for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
+ if (uv_blade_nr_possible_cpus(uvhub) &&
+ (uv_blade_to_pnode(uvhub) < uv_partition_base_pnode))
+ uv_partition_base_pnode = uv_blade_to_pnode(uvhub);
+ }
+
+ if (uv_init_per_cpu(nuvhubs, uv_partition_base_pnode)) {
nobau = 1;
return 0;
}
- uv_partition_base_pnode = 0x7fffffff;
- for (uvhub = 0; uvhub < nuvhubs; uvhub++)
- if (uv_blade_nr_possible_cpus(uvhub) &&
- (uv_blade_to_pnode(uvhub) < uv_partition_base_pnode))
- uv_partition_base_pnode = uv_blade_to_pnode(uvhub);
-
vector = UV_BAU_MESSAGE;
for_each_possible_blade(uvhub)
if (uv_blade_nr_possible_cpus(uvhub))
- uv_init_uvhub(uvhub, vector);
+ uv_init_uvhub(uvhub, vector, uv_partition_base_pnode);
uv_enable_timeouts();
alloc_intr_gate(vector, uv_bau_message_intr1);
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 9daf5d1..0eb9018 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -40,7 +40,6 @@
.rating = 400,
.read = uv_read_rtc,
.mask = (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK,
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -372,14 +371,11 @@
if (!is_uv_system())
return -ENODEV;
- clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
- clocksource_uv.shift);
-
/* If single blade, prefer tsc */
if (uv_num_possible_blades() == 1)
clocksource_uv.rating = 250;
- rc = clocksource_register(&clocksource_uv);
+ rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
if (rc)
printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
else
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e3c6a06..dd7b88f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -235,7 +235,7 @@
*dx &= maskedx;
}
-static __init void xen_init_cpuid_mask(void)
+static void __init xen_init_cpuid_mask(void)
{
unsigned int ax, bx, cx, dx;
unsigned int xsave_mask;
@@ -400,7 +400,7 @@
/*
* load_gdt for early boot, when the gdt is only mapped once
*/
-static __init void xen_load_gdt_boot(const struct desc_ptr *dtr)
+static void __init xen_load_gdt_boot(const struct desc_ptr *dtr)
{
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
@@ -662,7 +662,7 @@
* Version of write_gdt_entry for use at early boot-time needed to
* update an entry as simply as possible.
*/
-static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
+static void __init xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
const void *desc, int type)
{
switch (type) {
@@ -933,18 +933,18 @@
return ret;
}
-static const struct pv_info xen_info __initdata = {
+static const struct pv_info xen_info __initconst = {
.paravirt_enabled = 1,
.shared_kernel_pmd = 0,
.name = "Xen",
};
-static const struct pv_init_ops xen_init_ops __initdata = {
+static const struct pv_init_ops xen_init_ops __initconst = {
.patch = xen_patch,
};
-static const struct pv_cpu_ops xen_cpu_ops __initdata = {
+static const struct pv_cpu_ops xen_cpu_ops __initconst = {
.cpuid = xen_cpuid,
.set_debugreg = xen_set_debugreg,
@@ -1004,7 +1004,7 @@
.end_context_switch = xen_end_context_switch,
};
-static const struct pv_apic_ops xen_apic_ops __initdata = {
+static const struct pv_apic_ops xen_apic_ops __initconst = {
#ifdef CONFIG_X86_LOCAL_APIC
.startup_ipi_hook = paravirt_nop,
#endif
@@ -1055,7 +1055,7 @@
return 0;
}
-static const struct machine_ops __initdata xen_machine_ops = {
+static const struct machine_ops xen_machine_ops __initconst = {
.restart = xen_restart,
.halt = xen_machine_halt,
.power_off = xen_machine_halt,
@@ -1332,7 +1332,7 @@
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata xen_hvm_cpu_notifier = {
+static struct notifier_block xen_hvm_cpu_notifier __cpuinitdata = {
.notifier_call = xen_hvm_cpu_notify,
};
@@ -1381,7 +1381,7 @@
}
EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
-const __refconst struct hypervisor_x86 x86_hyper_xen_hvm = {
+const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
.name = "Xen HVM",
.detect = xen_hvm_platform,
.init_platform = xen_hvm_guest_init,
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 6a6fe89..8bbb465 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -113,7 +113,7 @@
xen_safe_halt();
}
-static const struct pv_irq_ops xen_irq_ops __initdata = {
+static const struct pv_irq_ops xen_irq_ops __initconst = {
.save_fl = PV_CALLEE_SAVE(xen_save_fl),
.restore_fl = PV_CALLEE_SAVE(xen_restore_fl),
.irq_disable = PV_CALLEE_SAVE(xen_irq_disable),
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index aef7af9..02d7524 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1054,7 +1054,7 @@
* that's before we have page structures to store the bits. So do all
* the book-keeping now.
*/
-static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page,
+static int __init xen_mark_pinned(struct mm_struct *mm, struct page *page,
enum pt_level level)
{
SetPagePinned(page);
@@ -1187,7 +1187,7 @@
active_mm = percpu_read(cpu_tlbstate.active_mm);
- if (active_mm == mm)
+ if (active_mm == mm && percpu_read(cpu_tlbstate.state) != TLBSTATE_OK)
leave_mm(smp_processor_id());
/* If this cpu still has a stale cr3 reference, then make sure
@@ -1271,13 +1271,27 @@
spin_unlock(&mm->page_table_lock);
}
-static __init void xen_pagetable_setup_start(pgd_t *base)
+static void __init xen_pagetable_setup_start(pgd_t *base)
{
}
+static __init void xen_mapping_pagetable_reserve(u64 start, u64 end)
+{
+ /* reserve the range used */
+ native_pagetable_reserve(start, end);
+
+ /* set as RW the rest */
+ printk(KERN_DEBUG "xen: setting RW the range %llx - %llx\n", end,
+ PFN_PHYS(pgt_buf_top));
+ while (end < PFN_PHYS(pgt_buf_top)) {
+ make_lowmem_page_readwrite(__va(end));
+ end += PAGE_SIZE;
+ }
+}
+
static void xen_post_allocator_init(void);
-static __init void xen_pagetable_setup_done(pgd_t *base)
+static void __init xen_pagetable_setup_done(pgd_t *base)
{
xen_setup_shared_info();
xen_post_allocator_init();
@@ -1474,7 +1488,7 @@
}
#ifdef CONFIG_X86_32
-static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
+static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte)
{
/* If there's an existing pte, then don't allow _PAGE_RW to be set */
if (pte_val_ma(*ptep) & _PAGE_PRESENT)
@@ -1484,7 +1498,7 @@
return pte;
}
#else /* CONFIG_X86_64 */
-static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
+static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte)
{
unsigned long pfn = pte_pfn(pte);
@@ -1495,7 +1509,7 @@
* it is RO.
*/
if (((!is_early_ioremap_ptep(ptep) &&
- pfn >= pgt_buf_start && pfn < pgt_buf_end)) ||
+ pfn >= pgt_buf_start && pfn < pgt_buf_top)) ||
(is_early_ioremap_ptep(ptep) && pfn != (pgt_buf_end - 1)))
pte = pte_wrprotect(pte);
@@ -1505,7 +1519,7 @@
/* Init-time set_pte while constructing initial pagetables, which
doesn't allow RO pagetable pages to be remapped RW */
-static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
+static void __init xen_set_pte_init(pte_t *ptep, pte_t pte)
{
pte = mask_rw_pte(ptep, pte);
@@ -1523,7 +1537,7 @@
/* Early in boot, while setting up the initial pagetable, assume
everything is pinned. */
-static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
+static void __init xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
{
#ifdef CONFIG_FLATMEM
BUG_ON(mem_map); /* should only be used early */
@@ -1533,7 +1547,7 @@
}
/* Used for pmd and pud */
-static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+static void __init xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
{
#ifdef CONFIG_FLATMEM
BUG_ON(mem_map); /* should only be used early */
@@ -1543,13 +1557,13 @@
/* Early release_pte assumes that all pts are pinned, since there's
only init_mm and anything attached to that is pinned. */
-static __init void xen_release_pte_init(unsigned long pfn)
+static void __init xen_release_pte_init(unsigned long pfn)
{
pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static __init void xen_release_pmd_init(unsigned long pfn)
+static void __init xen_release_pmd_init(unsigned long pfn)
{
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
@@ -1675,7 +1689,7 @@
BUG();
}
-static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
{
unsigned pmdidx, pteidx;
unsigned ident_pte;
@@ -1758,7 +1772,7 @@
* of the physical mapping once some sort of allocator has been set
* up.
*/
-__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
unsigned long max_pfn)
{
pud_t *l3;
@@ -1829,7 +1843,7 @@
static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
-static __init void xen_write_cr3_init(unsigned long cr3)
+static void __init xen_write_cr3_init(unsigned long cr3)
{
unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
@@ -1866,7 +1880,7 @@
pv_mmu_ops.write_cr3 = &xen_write_cr3;
}
-__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
unsigned long max_pfn)
{
pmd_t *kernel_pmd;
@@ -1972,7 +1986,7 @@
#endif
}
-__init void xen_ident_map_ISA(void)
+void __init xen_ident_map_ISA(void)
{
unsigned long pa;
@@ -1995,7 +2009,7 @@
xen_flush_tlb();
}
-static __init void xen_post_allocator_init(void)
+static void __init xen_post_allocator_init(void)
{
#ifdef CONFIG_XEN_DEBUG
pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug);
@@ -2032,7 +2046,7 @@
preempt_enable();
}
-static const struct pv_mmu_ops xen_mmu_ops __initdata = {
+static const struct pv_mmu_ops xen_mmu_ops __initconst = {
.read_cr2 = xen_read_cr2,
.write_cr2 = xen_write_cr2,
@@ -2105,6 +2119,7 @@
void __init xen_init_mmu_ops(void)
{
+ x86_init.mapping.pagetable_reserve = xen_mapping_pagetable_reserve;
x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start;
x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
pv_mmu_ops = xen_mmu_ops;
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 141eb0d..58efeb9 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -522,11 +522,20 @@
/* Boundary cross-over for the edges: */
if (idx) {
unsigned long *p2m = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ unsigned long *mid_mfn_p;
p2m_init(p2m);
p2m_top[topidx][mididx] = p2m;
+ /* For save/restore we need to MFN of the P2M saved */
+
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing),
+ "P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n",
+ topidx, mididx);
+ mid_mfn_p[mididx] = virt_to_mfn(p2m);
+
}
return idx != 0;
}
@@ -549,12 +558,29 @@
pfn += P2M_MID_PER_PAGE * P2M_PER_PAGE)
{
unsigned topidx = p2m_top_index(pfn);
- if (p2m_top[topidx] == p2m_mid_missing) {
- unsigned long **mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ unsigned long *mid_mfn_p;
+ unsigned long **mid;
+
+ mid = p2m_top[topidx];
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ if (mid == p2m_mid_missing) {
+ mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
p2m_mid_init(mid);
p2m_top[topidx] = mid;
+
+ BUG_ON(mid_mfn_p != p2m_mid_missing_mfn);
+ }
+ /* And the save/restore P2M tables.. */
+ if (mid_mfn_p == p2m_mid_missing_mfn) {
+ mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ p2m_mid_mfn_init(mid_mfn_p);
+
+ p2m_top_mfn_p[topidx] = mid_mfn_p;
+ p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p);
+ /* Note: we don't set mid_mfn_p[midix] here,
+ * look in __early_alloc_p2m */
}
}
@@ -650,7 +676,7 @@
}
/* Add an MFN override for a particular page */
-int m2p_add_override(unsigned long mfn, struct page *page)
+int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte)
{
unsigned long flags;
unsigned long pfn;
@@ -662,7 +688,6 @@
if (!PageHighMem(page)) {
address = (unsigned long)__va(pfn << PAGE_SHIFT);
ptep = lookup_address(address, &level);
-
if (WARN(ptep == NULL || level != PG_LEVEL_4K,
"m2p_add_override: pfn %lx not mapped", pfn))
return -EINVAL;
@@ -674,18 +699,17 @@
if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn))))
return -ENOMEM;
- if (!PageHighMem(page))
+ if (clear_pte && !PageHighMem(page))
/* Just zap old mapping for now */
pte_clear(&init_mm, address, ptep);
-
spin_lock_irqsave(&m2p_override_lock, flags);
list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]);
spin_unlock_irqrestore(&m2p_override_lock, flags);
return 0;
}
-
-int m2p_remove_override(struct page *page)
+EXPORT_SYMBOL_GPL(m2p_add_override);
+int m2p_remove_override(struct page *page, bool clear_pte)
{
unsigned long flags;
unsigned long mfn;
@@ -713,7 +737,7 @@
spin_unlock_irqrestore(&m2p_override_lock, flags);
set_phys_to_machine(pfn, page->index);
- if (!PageHighMem(page))
+ if (clear_pte && !PageHighMem(page))
set_pte_at(&init_mm, address, ptep,
pfn_pte(pfn, PAGE_KERNEL));
/* No tlb flush necessary because the caller already
@@ -721,6 +745,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(m2p_remove_override);
struct page *m2p_find_override(unsigned long mfn)
{
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 90bac0a..be1a464 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -50,7 +50,7 @@
*/
#define EXTRA_MEM_RATIO (10)
-static __init void xen_add_extra_mem(unsigned long pages)
+static void __init xen_add_extra_mem(unsigned long pages)
{
unsigned long pfn;
@@ -166,7 +166,7 @@
if (last > end)
continue;
- if (entry->type == E820_RAM) {
+ if ((entry->type == E820_RAM) || (entry->type == E820_UNUSABLE)) {
if (start > start_pci)
identity += set_phys_range_identity(
PFN_UP(start_pci), PFN_DOWN(start));
@@ -227,7 +227,11 @@
memcpy(map_raw, map, sizeof(map));
e820.nr_map = 0;
+#ifdef CONFIG_X86_32
+ xen_extra_mem_start = mem_end;
+#else
xen_extra_mem_start = max((1ULL << 32), mem_end);
+#endif
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end;
@@ -336,7 +340,7 @@
#endif
}
-static __cpuinit int register_callback(unsigned type, const void *func)
+static int __cpuinit register_callback(unsigned type, const void *func)
{
struct callback_register callback = {
.type = type,
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 3061244..41038c0 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -46,18 +46,17 @@
static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id);
/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
+ * Reschedule call back.
*/
static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
{
inc_irq_stat(irq_resched_count);
+ scheduler_ipi();
return IRQ_HANDLED;
}
-static __cpuinit void cpu_bringup(void)
+static void __cpuinit cpu_bringup(void)
{
int cpu = smp_processor_id();
@@ -85,7 +84,7 @@
wmb(); /* make sure everything is out */
}
-static __cpuinit void cpu_bringup_and_idle(void)
+static void __cpuinit cpu_bringup_and_idle(void)
{
cpu_bringup();
cpu_idle();
@@ -242,7 +241,7 @@
}
}
-static __cpuinit int
+static int __cpuinit
cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
{
struct vcpu_guest_context *ctxt;
@@ -486,7 +485,7 @@
return IRQ_HANDLED;
}
-static const struct smp_ops xen_smp_ops __initdata = {
+static const struct smp_ops xen_smp_ops __initconst = {
.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
.smp_prepare_cpus = xen_smp_prepare_cpus,
.smp_cpus_done = xen_smp_cpus_done,
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 2e2d370..5158c50 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -26,8 +26,6 @@
#include "xen-ops.h"
-#define XEN_SHIFT 22
-
/* Xen may fire a timer up to this many ns early */
#define TIMER_SLOP 100000
#define NS_PER_TICK (1000000000LL / HZ)
@@ -211,8 +209,6 @@
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = ~0,
- .mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
- .shift = XEN_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -439,16 +435,16 @@
}
}
-static const struct pv_time_ops xen_time_ops __initdata = {
+static const struct pv_time_ops xen_time_ops __initconst = {
.sched_clock = xen_clocksource_read,
};
-static __init void xen_time_init(void)
+static void __init xen_time_init(void)
{
int cpu = smp_processor_id();
struct timespec tp;
- clocksource_register(&xen_clocksource);
+ clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
/* Successfully turned off 100Hz tick, so we have the
@@ -468,7 +464,7 @@
xen_setup_cpu_clockevents();
}
-__init void xen_init_time_ops(void)
+void __init xen_init_time_ops(void)
{
pv_time_ops = xen_time_ops;
@@ -490,7 +486,7 @@
xen_setup_cpu_clockevents();
}
-__init void xen_hvm_init_time_ops(void)
+void __init xen_hvm_init_time_ops(void)
{
/* vector callback is needed otherwise we cannot receive interrupts
* on cpu > 0 and at this point we don't know how many cpus are
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 3112f55..97dfdc8 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -74,7 +74,7 @@
#ifdef CONFIG_PARAVIRT_SPINLOCKS
void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
+void __cpuinit xen_init_lock_cpu(int cpu);
void xen_uninit_lock_cpu(int cpu);
#else
static inline void xen_init_spinlocks(void)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index f0605ab..471fdcc 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -114,6 +114,13 @@
}
EXPORT_SYMBOL_GPL(cgroup_to_blkio_cgroup);
+struct blkio_cgroup *task_blkio_cgroup(struct task_struct *tsk)
+{
+ return container_of(task_subsys_state(tsk, blkio_subsys_id),
+ struct blkio_cgroup, css);
+}
+EXPORT_SYMBOL_GPL(task_blkio_cgroup);
+
static inline void
blkio_update_group_weight(struct blkio_group *blkg, unsigned int weight)
{
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
index 10919fa..c774930 100644
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@@ -291,6 +291,7 @@
#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
extern struct blkio_cgroup blkio_root_cgroup;
extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup);
+extern struct blkio_cgroup *task_blkio_cgroup(struct task_struct *tsk);
extern void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
struct blkio_group *blkg, void *key, dev_t dev,
enum blkio_policy_id plid);
@@ -314,6 +315,8 @@
struct cgroup;
static inline struct blkio_cgroup *
cgroup_to_blkio_cgroup(struct cgroup *cgroup) { return NULL; }
+static inline struct blkio_cgroup *
+task_blkio_cgroup(struct task_struct *tsk) { return NULL; }
static inline void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
struct blkio_group *blkg, void *key, dev_t dev,
diff --git a/block/blk-core.c b/block/blk-core.c
index a2e58ee..3fe00a1 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -316,8 +316,10 @@
*/
void blk_run_queue_async(struct request_queue *q)
{
- if (likely(!blk_queue_stopped(q)))
+ if (likely(!blk_queue_stopped(q))) {
+ __cancel_delayed_work(&q->delay_work);
queue_delayed_work(kblockd_workqueue, &q->delay_work, 0);
+ }
}
EXPORT_SYMBOL(blk_run_queue_async);
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 0475a22..252a81a 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -160,9 +160,8 @@
}
static struct throtl_grp * throtl_find_alloc_tg(struct throtl_data *td,
- struct cgroup *cgroup)
+ struct blkio_cgroup *blkcg)
{
- struct blkio_cgroup *blkcg = cgroup_to_blkio_cgroup(cgroup);
struct throtl_grp *tg = NULL;
void *key = td;
struct backing_dev_info *bdi = &td->queue->backing_dev_info;
@@ -229,12 +228,12 @@
static struct throtl_grp * throtl_get_tg(struct throtl_data *td)
{
- struct cgroup *cgroup;
struct throtl_grp *tg = NULL;
+ struct blkio_cgroup *blkcg;
rcu_read_lock();
- cgroup = task_cgroup(current, blkio_subsys_id);
- tg = throtl_find_alloc_tg(td, cgroup);
+ blkcg = task_blkio_cgroup(current);
+ tg = throtl_find_alloc_tg(td, blkcg);
if (!tg)
tg = &td->root_tg;
rcu_read_unlock();
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 5b52011..ab7a9e6 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1014,10 +1014,9 @@
cfqg->needs_update = true;
}
-static struct cfq_group *
-cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)
+static struct cfq_group * cfq_find_alloc_cfqg(struct cfq_data *cfqd,
+ struct blkio_cgroup *blkcg, int create)
{
- struct blkio_cgroup *blkcg = cgroup_to_blkio_cgroup(cgroup);
struct cfq_group *cfqg = NULL;
void *key = cfqd;
int i, j;
@@ -1079,12 +1078,12 @@
*/
static struct cfq_group *cfq_get_cfqg(struct cfq_data *cfqd, int create)
{
- struct cgroup *cgroup;
+ struct blkio_cgroup *blkcg;
struct cfq_group *cfqg = NULL;
rcu_read_lock();
- cgroup = task_cgroup(current, blkio_subsys_id);
- cfqg = cfq_find_alloc_cfqg(cfqd, cgroup, create);
+ blkcg = task_blkio_cgroup(current);
+ cfqg = cfq_find_alloc_cfqg(cfqd, blkcg, create);
if (!cfqg && create)
cfqg = &cfqd->root_group;
rcu_read_unlock();
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 4b7cb0e..87b22ca 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -264,11 +264,6 @@
key size 256, 384 or 512 bits. This implementation currently
can't handle a sectorsize which is not a multiple of 16 bytes.
-config CRYPTO_FPU
- tristate
- select CRYPTO_BLKCIPHER
- select CRYPTO_MANAGER
-
comment "Hash modes"
config CRYPTO_HMAC
@@ -543,7 +538,6 @@
select CRYPTO_AES_586 if !64BIT
select CRYPTO_CRYPTD
select CRYPTO_ALGAPI
- select CRYPTO_FPU
help
Use Intel AES-NI instructions for AES algorithm.
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index e912ea5..2222617 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -1009,6 +1009,10 @@
speed_template_32_48_64);
test_cipher_speed("xts(aes)", DECRYPT, sec, NULL, 0,
speed_template_32_48_64);
+ test_cipher_speed("ctr(aes)", ENCRYPT, sec, NULL, 0,
+ speed_template_16_24_32);
+ test_cipher_speed("ctr(aes)", DECRYPT, sec, NULL, 0,
+ speed_template_16_24_32);
break;
case 201:
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index 2854865..b6b93d4 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -2219,6 +2219,22 @@
}
}
}, {
+ .alg = "ofb(aes)",
+ .test = alg_test_skcipher,
+ .fips_allowed = 1,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = aes_ofb_enc_tv_template,
+ .count = AES_OFB_ENC_TEST_VECTORS
+ },
+ .dec = {
+ .vecs = aes_ofb_dec_tv_template,
+ .count = AES_OFB_DEC_TEST_VECTORS
+ }
+ }
+ }
+ }, {
.alg = "pcbc(fcrypt)",
.test = alg_test_skcipher,
.suite = {
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index aa6dac0..27e6061 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -2980,6 +2980,8 @@
#define AES_XTS_DEC_TEST_VECTORS 4
#define AES_CTR_ENC_TEST_VECTORS 3
#define AES_CTR_DEC_TEST_VECTORS 3
+#define AES_OFB_ENC_TEST_VECTORS 1
+#define AES_OFB_DEC_TEST_VECTORS 1
#define AES_CTR_3686_ENC_TEST_VECTORS 7
#define AES_CTR_3686_DEC_TEST_VECTORS 6
#define AES_GCM_ENC_TEST_VECTORS 9
@@ -5506,6 +5508,64 @@
},
};
+static struct cipher_testvec aes_ofb_enc_tv_template[] = {
+ /* From NIST Special Publication 800-38A, Appendix F.5 */
+ {
+ .key = "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+ "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+ .klen = 16,
+ .iv = "\x00\x01\x02\x03\x04\x05\x06\x07\x08"
+ "\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+ .input = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+ "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+ "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+ "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+ "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+ "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+ "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+ .ilen = 64,
+ .result = "\x3b\x3f\xd9\x2e\xb7\x2d\xad\x20"
+ "\x33\x34\x49\xf8\xe8\x3c\xfb\x4a"
+ "\x77\x89\x50\x8d\x16\x91\x8f\x03\xf5"
+ "\x3c\x52\xda\xc5\x4e\xd8\x25"
+ "\x97\x40\x05\x1e\x9c\x5f\xec\xf6\x43"
+ "\x44\xf7\xa8\x22\x60\xed\xcc"
+ "\x30\x4c\x65\x28\xf6\x59\xc7\x78"
+ "\x66\xa5\x10\xd9\xc1\xd6\xae\x5e",
+ .rlen = 64,
+ }
+};
+
+static struct cipher_testvec aes_ofb_dec_tv_template[] = {
+ /* From NIST Special Publication 800-38A, Appendix F.5 */
+ {
+ .key = "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+ "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+ .klen = 16,
+ .iv = "\x00\x01\x02\x03\x04\x05\x06\x07\x08"
+ "\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+ .input = "\x3b\x3f\xd9\x2e\xb7\x2d\xad\x20"
+ "\x33\x34\x49\xf8\xe8\x3c\xfb\x4a"
+ "\x77\x89\x50\x8d\x16\x91\x8f\x03\xf5"
+ "\x3c\x52\xda\xc5\x4e\xd8\x25"
+ "\x97\x40\x05\x1e\x9c\x5f\xec\xf6\x43"
+ "\x44\xf7\xa8\x22\x60\xed\xcc"
+ "\x30\x4c\x65\x28\xf6\x59\xc7\x78"
+ "\x66\xa5\x10\xd9\xc1\xd6\xae\x5e",
+ .ilen = 64,
+ .result = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+ "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+ "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+ "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+ "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+ "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+ "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+ .rlen = 64,
+ }
+};
+
static struct aead_testvec aes_gcm_enc_tv_template[] = {
{ /* From McGrew & Viega - http://citeseer.ist.psu.edu/656989.html */
.key = zeroed_string,
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d1..61631ed 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,6 +68,8 @@
source "drivers/ssb/Kconfig"
+source "drivers/bcma/Kconfig"
+
source "drivers/mfd/Kconfig"
source "drivers/regulator/Kconfig"
@@ -119,4 +121,7 @@
source "drivers/clk/Kconfig"
source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 3f135b6..a29527f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -110,6 +110,7 @@
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
+obj-$(CONFIG_BCMA) += bcma/
obj-$(CONFIG_VHOST_NET) += vhost/
obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_STAGING) += staging/
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index 66a03ca..f739a70 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -1,5 +1,6 @@
config ACPI_APEI
bool "ACPI Platform Error Interface (APEI)"
+ select MISC_FILESYSTEMS
select PSTORE
depends on X86
help
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index d6cb0ff..e6cef8e 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -929,13 +929,17 @@
return 0;
}
-static size_t erst_reader(u64 *id, enum pstore_type_id *type,
+static int erst_open_pstore(struct pstore_info *psi);
+static int erst_close_pstore(struct pstore_info *psi);
+static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
struct timespec *time);
static u64 erst_writer(enum pstore_type_id type, size_t size);
static struct pstore_info erst_info = {
.owner = THIS_MODULE,
.name = "erst",
+ .open = erst_open_pstore,
+ .close = erst_close_pstore,
.read = erst_reader,
.write = erst_writer,
.erase = erst_clear
@@ -957,12 +961,32 @@
char data[];
} __packed;
-static size_t erst_reader(u64 *id, enum pstore_type_id *type,
+static int reader_pos;
+
+static int erst_open_pstore(struct pstore_info *psi)
+{
+ int rc;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ rc = erst_get_record_id_begin(&reader_pos);
+
+ return rc;
+}
+
+static int erst_close_pstore(struct pstore_info *psi)
+{
+ erst_get_record_id_end();
+
+ return 0;
+}
+
+static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
struct timespec *time)
{
int rc;
- ssize_t len;
- unsigned long flags;
+ ssize_t len = 0;
u64 record_id;
struct cper_pstore_record *rcd = (struct cper_pstore_record *)
(erst_info.buf - sizeof(*rcd));
@@ -970,24 +994,28 @@
if (erst_disable)
return -ENODEV;
- raw_spin_lock_irqsave(&erst_lock, flags);
skip:
- rc = __erst_get_next_record_id(&record_id);
- if (rc) {
- raw_spin_unlock_irqrestore(&erst_lock, flags);
- return rc;
- }
+ rc = erst_get_record_id_next(&reader_pos, &record_id);
+ if (rc)
+ goto out;
+
/* no more record */
if (record_id == APEI_ERST_INVALID_RECORD_ID) {
- raw_spin_unlock_irqrestore(&erst_lock, flags);
- return 0;
+ rc = -1;
+ goto out;
}
- len = __erst_read(record_id, &rcd->hdr, sizeof(*rcd) +
- erst_erange.size);
+ len = erst_read(record_id, &rcd->hdr, sizeof(*rcd) +
+ erst_info.bufsize);
+ /* The record may be cleared by others, try read next record */
+ if (len == -ENOENT)
+ goto skip;
+ else if (len < 0) {
+ rc = -1;
+ goto out;
+ }
if (uuid_le_cmp(rcd->hdr.creator_id, CPER_CREATOR_PSTORE) != 0)
goto skip;
- raw_spin_unlock_irqrestore(&erst_lock, flags);
*id = record_id;
if (uuid_le_cmp(rcd->sec_hdr.section_type,
@@ -1005,7 +1033,8 @@
time->tv_sec = 0;
time->tv_nsec = 0;
- return len - sizeof(*rcd);
+out:
+ return (rc < 0) ? rc : (len - sizeof(*rcd));
}
static u64 erst_writer(enum pstore_type_id type, size_t size)
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 3a73a93..85b3237 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -49,10 +49,6 @@
static DEFINE_MUTEX(performance_mutex);
-/* Use cpufreq debug layer for _PPC changes. */
-#define cpufreq_printk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
- "cpufreq-core", msg)
-
/*
* _PPC support is implemented as a CPUfreq policy notifier:
* This means each time a CPUfreq driver registered also with
@@ -145,7 +141,7 @@
return -ENODEV;
}
- cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
+ pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
(int)ppc, ppc ? "" : "not");
pr->performance_platform_limit = (int)ppc;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index ad35017..605a295 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -710,20 +710,14 @@
}
#ifdef CONFIG_X86
-static int acpi_throttling_rdmsr(struct acpi_processor *pr,
- u64 *value)
+static int acpi_throttling_rdmsr(u64 *value)
{
- struct cpuinfo_x86 *c;
u64 msr_high, msr_low;
- unsigned int cpu;
u64 msr = 0;
int ret = -1;
- cpu = pr->id;
- c = &cpu_data(cpu);
-
- if ((c->x86_vendor != X86_VENDOR_INTEL) ||
- !cpu_has(c, X86_FEATURE_ACPI)) {
+ if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
+ !this_cpu_has(X86_FEATURE_ACPI)) {
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
} else {
@@ -738,18 +732,13 @@
return ret;
}
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
+static int acpi_throttling_wrmsr(u64 value)
{
- struct cpuinfo_x86 *c;
- unsigned int cpu;
int ret = -1;
u64 msr;
- cpu = pr->id;
- c = &cpu_data(cpu);
-
- if ((c->x86_vendor != X86_VENDOR_INTEL) ||
- !cpu_has(c, X86_FEATURE_ACPI)) {
+ if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
+ !this_cpu_has(X86_FEATURE_ACPI)) {
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
} else {
@@ -761,15 +750,14 @@
return ret;
}
#else
-static int acpi_throttling_rdmsr(struct acpi_processor *pr,
- u64 *value)
+static int acpi_throttling_rdmsr(u64 *value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
return -1;
}
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
+static int acpi_throttling_wrmsr(u64 value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
@@ -801,7 +789,7 @@
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
- ret = acpi_throttling_rdmsr(pr, value);
+ ret = acpi_throttling_rdmsr(value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
@@ -834,7 +822,7 @@
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
- ret = acpi_throttling_wrmsr(pr, value);
+ ret = acpi_throttling_wrmsr(value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 339c210..ae22be4 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -417,7 +417,7 @@
VPRINTK("ENTER\n");
- WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+ WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ff9d832..d38c40f 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -561,27 +561,6 @@
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
- u8 status;
-
- status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
- /*
- * At end of section 10.1 of AHCI spec (rev 1.3), it states
- * Software shall not set PxCMD.ST to 1 until it is determined
- * that a functoinal device is present on the port as determined by
- * PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h
- *
- * Even though most AHCI host controllers work without this check,
- * specific controller will fail under this condition
- */
- if (status & (ATA_BUSY | ATA_DRQ))
- return;
- else {
- ahci_scr_read(&ap->link, SCR_STATUS, &tmp);
-
- if ((tmp & 0xf) != 0x3)
- return;
- }
/* start DMA */
tmp = readl(port_mmio + PORT_CMD);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 76c3c15..736bee5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3619,8 +3619,14 @@
scontrol |= (0x2 << 8);
break;
case ATA_LPM_MIN_POWER:
- /* no restrictions on LPM transitions */
- scontrol &= ~(0x3 << 8);
+ if (ata_link_nr_enabled(link) > 0)
+ /* no restrictions on LPM transitions */
+ scontrol &= ~(0x3 << 8);
+ else {
+ /* empty port, power off */
+ scontrol &= ~0xf;
+ scontrol |= (0x1 << 2);
+ }
break;
default:
WARN_ON(1);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f26f2fe..dfb6e9d 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3316,7 +3316,7 @@
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
enum ata_lpm_policy old_policy = link->lpm_policy;
- bool no_dipm = ap->flags & ATA_FLAG_NO_DIPM;
+ bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
unsigned int err_mask;
int rc;
@@ -3423,7 +3423,7 @@
return rc;
}
-static int ata_link_nr_enabled(struct ata_link *link)
+int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
int cnt = 0;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 3120596..f06b7ea 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -449,6 +449,16 @@
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
+ } else if (vendor == 0x197b && devid == 0x2352) {
+ /* chip found in Thermaltake BlackX Duet, jmicron JMB350? */
+ ata_for_each_link(link, ap, EDGE) {
+ /* SRST breaks detection and disks get misclassified
+ * LPM disabled to avoid potential problems
+ */
+ link->flags |= ATA_LFLAG_NO_LPM |
+ ATA_LFLAG_NO_SRST |
+ ATA_LFLAG_ASSUME_ATA;
+ }
}
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e2f57e9e..30ea95f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2138,7 +2138,7 @@
* with the unmap bit set.
*/
if (ata_id_has_trim(args->id)) {
- put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
+ put_unaligned_be64(65535 * 512 / 8, &rbuf[36]);
put_unaligned_be32(1, &rbuf[28]);
}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index f8380ce..b1b926c 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2447,13 +2447,18 @@
return -ENOMEM;
if (!legacy_mode && pdev->irq) {
+ int i;
+
rc = devm_request_irq(dev, pdev->irq, irq_handler,
IRQF_SHARED, drv_name, host);
if (rc)
goto out;
- ata_port_desc(host->ports[0], "irq %d", pdev->irq);
- ata_port_desc(host->ports[1], "irq %d", pdev->irq);
+ for (i = 0; i < 2; i++) {
+ if (ata_port_is_dummy(host->ports[i]))
+ continue;
+ ata_port_desc(host->ports[i], "irq %d", pdev->irq);
+ }
} else if (legacy_mode) {
if (!ata_port_is_dummy(host->ports[0])) {
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a5fdbdc..960c7257 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -3,6 +3,7 @@
* with CompactFlash interface in True IDE mode
*
* Copyright (C) 2009 Matyukevich Sergey
+ * 2011 Igor Plyatov
*
* Based on:
* * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
@@ -31,38 +32,150 @@
#include <mach/board.h>
#include <mach/gpio.h>
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.3"
-#define DRV_NAME "pata_at91"
-#define DRV_VERSION "0.2"
-
-#define CF_IDE_OFFSET 0x00c00000
-#define CF_ALT_IDE_OFFSET 0x00e00000
-#define CF_IDE_RES_SIZE 0x08
-#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse bitfields */
+#define CF_IDE_OFFSET 0x00c00000
+#define CF_ALT_IDE_OFFSET 0x00e00000
+#define CF_IDE_RES_SIZE 0x08
+#define CS_PULSE_MAXIMUM 319
+#define ER_SMC_CALC 1
+#define ER_SMC_RECALC 2
struct at91_ide_info {
unsigned long mode;
unsigned int cs;
-
struct clk *mck;
-
void __iomem *ide_addr;
void __iomem *alt_addr;
};
-static const struct ata_timing initial_timing = {
- .mode = XFER_PIO_0,
- .setup = 70,
- .act8b = 290,
- .rec8b = 240,
- .cyc8b = 600,
- .active = 165,
- .recover = 150,
- .dmack_hold = 0,
- .cycle = 600,
- .udma = 0
+/**
+ * struct smc_range - range of valid values for SMC register.
+ */
+struct smc_range {
+ int min;
+ int max;
};
+/**
+ * adjust_smc_value - adjust value for one of SMC registers.
+ * @value: adjusted value
+ * @range: array of SMC ranges with valid values
+ * @size: SMC ranges array size
+ *
+ * This returns the difference between input and output value or negative
+ * in case of invalid input value.
+ * If negative returned, then output value = maximal possible from ranges.
+ */
+static int adjust_smc_value(int *value, struct smc_range *range, int size)
+{
+ int maximum = (range + size - 1)->max;
+ int remainder;
+
+ do {
+ if (*value < range->min) {
+ remainder = range->min - *value;
+ *value = range->min; /* nearest valid value */
+ return remainder;
+ } else if ((range->min <= *value) && (*value <= range->max))
+ return 0;
+
+ range++;
+ } while (--size);
+ *value = maximum;
+
+ return -1; /* invalid value */
+}
+
+/**
+ * calc_smc_vals - calculate SMC register values
+ * @dev: ATA device
+ * @setup: SMC_SETUP register value
+ * @pulse: SMC_PULSE register value
+ * @cycle: SMC_CYCLE register value
+ *
+ * This returns negative in case of invalid values for SMC registers:
+ * -ER_SMC_RECALC - recalculation required for SMC values,
+ * -ER_SMC_CALC - calculation failed (invalid input values).
+ *
+ * SMC use special coding scheme, see "Coding and Range of Timing
+ * Parameters" table from AT91SAM9 datasheets.
+ *
+ * SMC_SETUP = 128*setup[5] + setup[4:0]
+ * SMC_PULSE = 256*pulse[6] + pulse[5:0]
+ * SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
+ */
+static int calc_smc_vals(struct device *dev,
+ int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+ int ret_val;
+ int err = 0;
+ struct smc_range range_setup[] = { /* SMC_SETUP valid values */
+ {.min = 0, .max = 31}, /* first range */
+ {.min = 128, .max = 159} /* second range */
+ };
+ struct smc_range range_pulse[] = { /* SMC_PULSE valid values */
+ {.min = 0, .max = 63}, /* first range */
+ {.min = 256, .max = 319} /* second range */
+ };
+ struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */
+ {.min = 0, .max = 127}, /* first range */
+ {.min = 256, .max = 383}, /* second range */
+ {.min = 512, .max = 639}, /* third range */
+ {.min = 768, .max = 895} /* fourth range */
+ };
+
+ ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Setup value\n");
+ else
+ *cycle += ret_val;
+
+ ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Pulse value\n");
+ else
+ *cycle += ret_val;
+
+ ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Cycle value\n");
+
+ *cs_pulse = *cycle;
+ if (*cs_pulse > CS_PULSE_MAXIMUM) {
+ dev_err(dev, "unable to calculate valid SMC settings\n");
+ return -ER_SMC_CALC;
+ }
+
+ ret_val = adjust_smc_value(cs_pulse, range_pulse,
+ ARRAY_SIZE(range_pulse));
+ if (ret_val < 0) {
+ dev_warn(dev, "maximal SMC CS Pulse value\n");
+ } else if (ret_val != 0) {
+ *cycle = *cs_pulse;
+ dev_warn(dev, "SMC Cycle extended\n");
+ err = -ER_SMC_RECALC;
+ }
+
+ return err;
+}
+
+/**
+ * to_smc_format - convert values into SMC format
+ * @setup: SETUP value of SMC Setup Register
+ * @pulse: PULSE value of SMC Pulse Register
+ * @cycle: CYCLE value of SMC Cycle Register
+ * @cs_pulse: NCS_PULSE value of SMC Pulse Register
+ */
+static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+ *setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
+ *pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
+ *cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
+ *cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
+}
+
static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
{
unsigned long mul;
@@ -80,85 +193,77 @@
return (ns * mul + 65536) >> 16; /* rounding */
}
-static void set_smc_mode(struct at91_ide_info *info)
-{
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
- return;
-}
-
-static void set_smc_timing(struct device *dev,
+/**
+ * set_smc_timing - SMC timings setup.
+ * @dev: device
+ * @info: AT91 IDE info
+ * @ata: ATA timings
+ *
+ * Its assumed that write timings are same as read timings,
+ * cs_setup = 0 and cs_pulse = cycle.
+ */
+static void set_smc_timing(struct device *dev, struct ata_device *adev,
struct at91_ide_info *info, const struct ata_timing *ata)
{
- unsigned long read_cycle, write_cycle, active, recover;
- unsigned long nrd_setup, nrd_pulse, nrd_recover;
- unsigned long nwe_setup, nwe_pulse;
+ int ret = 0;
+ int use_iordy;
+ unsigned int t6z; /* data tristate time in ns */
+ unsigned int cycle; /* SMC Cycle width in MCK ticks */
+ unsigned int setup; /* SMC Setup width in MCK ticks */
+ unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
+ unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
+ unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
+ unsigned int tdf_cycles; /* SMC TDF MCK ticks */
+ unsigned long mck_hz; /* MCK frequency in Hz */
- unsigned long ncs_write_setup, ncs_write_pulse;
- unsigned long ncs_read_setup, ncs_read_pulse;
-
- unsigned long mck_hz;
-
- read_cycle = ata->cyc8b;
- nrd_setup = ata->setup;
- nrd_pulse = ata->act8b;
- nrd_recover = ata->rec8b;
-
+ t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
mck_hz = clk_get_rate(info->mck);
+ cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
+ setup = calc_mck_cycles(ata->setup, mck_hz);
+ pulse = calc_mck_cycles(ata->act8b, mck_hz);
+ tdf_cycles = calc_mck_cycles(t6z, mck_hz);
- read_cycle = calc_mck_cycles(read_cycle, mck_hz);
- nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
- nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
- nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
+ do {
+ ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
+ } while (ret == -ER_SMC_RECALC);
- active = nrd_setup + nrd_pulse;
- recover = read_cycle - active;
+ if (ret == -ER_SMC_CALC)
+ dev_err(dev, "Interface may not operate correctly\n");
- /* Need at least two cycles recovery */
- if (recover < 2)
- read_cycle = active + 2;
+ dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
+ setup, pulse, cycle, cs_pulse);
+ to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
+ /* disable or enable waiting for IORDY signal */
+ use_iordy = ata_pio_need_iordy(adev);
+ if (use_iordy)
+ info->mode |= AT91_SMC_EXNWMODE_READY;
- /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
- ncs_read_setup = 1;
- ncs_read_pulse = read_cycle - 2;
- if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
- ncs_read_pulse = NCS_RD_PULSE_LIMIT;
- dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n",
- ncs_read_pulse);
+ if (tdf_cycles > 15) {
+ tdf_cycles = 15;
+ dev_warn(dev, "maximal SMC TDF Cycles value\n");
}
- /* Write timings same as read timings */
- write_cycle = read_cycle;
- nwe_setup = nrd_setup;
- nwe_pulse = nrd_pulse;
- ncs_write_setup = ncs_read_setup;
- ncs_write_pulse = ncs_read_pulse;
+ dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
+ info->mode |= AT91_SMC_TDF_(tdf_cycles);
- dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
- nrd_setup, nrd_pulse, read_cycle);
- dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
- nwe_setup, nwe_pulse, write_cycle);
- dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
- ncs_read_setup, ncs_read_pulse);
- dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
- ncs_write_setup, ncs_write_pulse);
-
+ /* write SMC Setup Register */
at91_sys_write(AT91_SMC_SETUP(info->cs),
- AT91_SMC_NWESETUP_(nwe_setup) |
- AT91_SMC_NRDSETUP_(nrd_setup) |
- AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
- AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
-
+ AT91_SMC_NWESETUP_(setup) |
+ AT91_SMC_NRDSETUP_(setup) |
+ AT91_SMC_NCS_WRSETUP_(cs_setup) |
+ AT91_SMC_NCS_RDSETUP_(cs_setup));
+ /* write SMC Pulse Register */
at91_sys_write(AT91_SMC_PULSE(info->cs),
- AT91_SMC_NWEPULSE_(nwe_pulse) |
- AT91_SMC_NRDPULSE_(nrd_pulse) |
- AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
- AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
-
+ AT91_SMC_NWEPULSE_(pulse) |
+ AT91_SMC_NRDPULSE_(pulse) |
+ AT91_SMC_NCS_WRPULSE_(cs_pulse) |
+ AT91_SMC_NCS_RDPULSE_(cs_pulse));
+ /* write SMC Cycle Register */
at91_sys_write(AT91_SMC_CYCLE(info->cs),
- AT91_SMC_NWECYCLE_(write_cycle) |
- AT91_SMC_NRDCYCLE_(read_cycle));
-
- return;
+ AT91_SMC_NWECYCLE_(cycle) |
+ AT91_SMC_NRDCYCLE_(cycle));
+ /* write SMC Mode Register*/
+ at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -172,15 +277,9 @@
if (ret) {
dev_warn(ap->dev, "Failed to compute ATA timing %d, "
"set PIO_0 timing\n", ret);
- set_smc_timing(ap->dev, info, &initial_timing);
- } else {
- set_smc_timing(ap->dev, info, &timing);
+ timing = *ata_timing_find_mode(XFER_PIO_0);
}
-
- /* Setup SMC mode */
- set_smc_mode(info);
-
- return;
+ set_smc_timing(ap->dev, adev, info, &timing);
}
static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
@@ -346,7 +445,7 @@
static struct platform_driver pata_at91_driver = {
.probe = pata_at91_probe,
.remove = __devexit_p(pata_at91_remove),
- .driver = {
+ .driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 905ff76..7bafc16 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -41,6 +41,9 @@
enum {
CFR = 0x50,
CFR_INTR_CH0 = 0x04,
+ CNTRL = 0x51,
+ CNTRL_CH0 = 0x04,
+ CNTRL_CH1 = 0x08,
CMDTIM = 0x52,
ARTTIM0 = 0x53,
DRWTIM0 = 0x54,
@@ -328,9 +331,19 @@
.port_ops = &cmd648_port_ops
}
};
- const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
- u8 mrdmode;
+ const struct ata_port_info *ppi[] = {
+ &cmd_info[id->driver_data],
+ &cmd_info[id->driver_data],
+ NULL
+ };
+ u8 mrdmode, reg;
int rc;
+ struct pci_dev *bridge = pdev->bus->self;
+ /* mobility split bridges don't report enabled ports correctly */
+ int port_ok = !(bridge && bridge->vendor ==
+ PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
+ /* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
+ int cntrl_ch0_ok = (id->driver_data != 0);
rc = pcim_enable_device(pdev);
if (rc)
@@ -341,11 +354,18 @@
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
- if (pdev->revision > 4)
+ if (pdev->revision > 4) {
ppi[0] = &cmd_info[2];
+ ppi[1] = &cmd_info[2];
+ }
/* Early rev with other problems ? */
- else if (pdev->revision == 1)
+ else if (pdev->revision == 1) {
ppi[0] = &cmd_info[3];
+ ppi[1] = &cmd_info[3];
+ }
+ /* revs 1,2 have no CNTRL_CH0 */
+ if (pdev->revision < 3)
+ cntrl_ch0_ok = 0;
}
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
@@ -354,6 +374,20 @@
mrdmode |= 0x02; /* Memory read line enable */
pci_write_config_byte(pdev, MRDMODE, mrdmode);
+ /* check for enabled ports */
+ pci_read_config_byte(pdev, CNTRL, ®);
+ if (!port_ok)
+ dev_printk(KERN_NOTICE, &pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
+ if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
+ ppi[0] = &ata_dummy_port_info;
+
+ }
+ if (port_ok && !(reg & CNTRL_CH1)) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
+ ppi[1] = &ata_dummy_port_info;
+ }
+
/* Force PIO 0 here.. */
/* PPC specific fixup copied from old driver */
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 03b6d69..b3e0c94 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -210,13 +210,34 @@
{ },
};
+#ifdef CONFIG_PM
+static int triflex_ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ /*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+ pci_save_state(pdev);
+
+ return 0;
+}
+
+#endif
+
static struct pci_driver triflex_pci_driver = {
.name = DRV_NAME,
.id_table = triflex,
.probe = triflex_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
- .suspend = ata_pci_device_suspend,
+ .suspend = triflex_ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index c495fae..3230ea0 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1469,10 +1469,7 @@
static void bug_int(struct atm_dev *dev,unsigned long reason)
{
- struct eni_dev *eni_dev;
-
DPRINTK(">bug_int\n");
- eni_dev = ENI_DEV(dev);
if (reason & MID_DMA_ERR_ACK)
printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - DMA "
"error\n",dev->number);
@@ -1900,7 +1897,6 @@
static int eni_open(struct atm_vcc *vcc)
{
- struct eni_dev *eni_dev;
struct eni_vcc *eni_vcc;
int error;
short vpi = vcc->vpi;
@@ -1910,7 +1906,6 @@
EVENT("eni_open\n",0,0);
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
vcc->dev_data = NULL;
- eni_dev = ENI_DEV(vcc->dev);
if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)
set_bit(ATM_VF_ADDR,&vcc->flags);
if (vcc->qos.aal != ATM_AAL0 && vcc->qos.aal != ATM_AAL5)
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index bdd2719..bc9e702 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2643,16 +2643,19 @@
}
#ifdef CONFIG_SBUS
+static const struct of_device_id fore200e_sba_match[];
static int __devinit fore200e_sba_probe(struct platform_device *op)
{
+ const struct of_device_id *match;
const struct fore200e_bus *bus;
struct fore200e *fore200e;
static int index = 0;
int err;
- if (!op->dev.of_match)
+ match = of_match_device(fore200e_sba_match, &op->dev);
+ if (!match)
return -EINVAL;
- bus = op->dev.of_match->data;
+ bus = match->data;
fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL);
if (!fore200e)
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 6cf59bf..9a51df4 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -1801,7 +1801,7 @@
next_rbrq_entry:
he_dev->rbrq_head = (struct he_rbrq *)
((unsigned long) he_dev->rbrq_base |
- RBRQ_MASK(++he_dev->rbrq_head));
+ RBRQ_MASK(he_dev->rbrq_head + 1));
}
read_unlock(&vcc_sklist_lock);
@@ -1884,7 +1884,7 @@
pci_pool_free(he_dev->tpd_pool, tpd, TPD_ADDR(tpd->status));
he_dev->tbrq_head = (struct he_tbrq *)
((unsigned long) he_dev->tbrq_base |
- TBRQ_MASK(++he_dev->tbrq_head));
+ TBRQ_MASK(he_dev->tbrq_head + 1));
}
if (updated) {
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 048f99f..1f8d724 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -1261,14 +1261,13 @@
PCI_DMA_FROMDEVICE);
while (head != tail) {
- unsigned int vpi, vci, pti;
+ unsigned int vpi, vci;
u32 header;
header = le32_to_cpu(*(u32 *) &queue->data[0]);
vpi = (header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT;
vci = (header & ATM_HDR_VCI_MASK) >> ATM_HDR_VCI_SHIFT;
- pti = (header & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT;
#ifdef CONFIG_ATM_IDT77252_DEBUG
if (debug & DBG_RAW_CELL) {
@@ -2709,53 +2708,10 @@
static void
idt77252_collect_stat(struct idt77252_dev *card)
{
- u32 cdc, vpec, icc;
+ (void) readl(SAR_REG_CDC);
+ (void) readl(SAR_REG_VPEC);
+ (void) readl(SAR_REG_ICC);
- cdc = readl(SAR_REG_CDC);
- vpec = readl(SAR_REG_VPEC);
- icc = readl(SAR_REG_ICC);
-
-#ifdef NOTDEF
- printk("%s:", card->name);
-
- if (cdc & 0x7f0000) {
- char *s = "";
-
- printk(" [");
- if (cdc & (1 << 22)) {
- printk("%sRM ID", s);
- s = " | ";
- }
- if (cdc & (1 << 21)) {
- printk("%sCON TAB", s);
- s = " | ";
- }
- if (cdc & (1 << 20)) {
- printk("%sNO FB", s);
- s = " | ";
- }
- if (cdc & (1 << 19)) {
- printk("%sOAM CRC", s);
- s = " | ";
- }
- if (cdc & (1 << 18)) {
- printk("%sRM CRC", s);
- s = " | ";
- }
- if (cdc & (1 << 17)) {
- printk("%sRM FIFO", s);
- s = " | ";
- }
- if (cdc & (1 << 16)) {
- printk("%sRX FIFO", s);
- s = " | ";
- }
- printk("]");
- }
-
- printk(" CDC %04x, VPEC %04x, ICC: %04x\n",
- cdc & 0xffff, vpec & 0xffff, icc & 0xffff);
-#endif
}
static irqreturn_t
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 1c674a9..dee4f01 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -613,7 +613,6 @@
struct sk_buff *skb;
int num_desc;
struct atm_vcc *vcc;
- struct ia_vcc *iavcc;
num_desc = ia_avail_descs(iadev);
while (num_desc && (skb = skb_dequeue(&iadev->tx_backlog))) {
@@ -627,7 +626,6 @@
printk("Free the SKB on closed vci %d \n", vcc->vci);
break;
}
- iavcc = INPH_IA_VCC(vcc);
if (ia_pkt_tx (vcc, skb)) {
skb_queue_head(&iadev->tx_backlog, skb);
}
@@ -823,8 +821,6 @@
volatile IA_SUNI *suni;
volatile ia_mb25_t *mb25;
volatile suni_pm7345_t *suni_pm7345;
- u32 intr_status;
- u_int frmr_intr;
if(iadev->phy_type & FE_25MBIT_PHY) {
mb25 = (ia_mb25_t*)iadev->phy;
@@ -832,18 +828,18 @@
} else if (iadev->phy_type & FE_DS3_PHY) {
suni_pm7345 = (suni_pm7345_t *)iadev->phy;
/* clear FRMR interrupts */
- frmr_intr = suni_pm7345->suni_ds3_frm_intr_stat;
+ (void) suni_pm7345->suni_ds3_frm_intr_stat;
iadev->carrier_detect =
Boolean(!(suni_pm7345->suni_ds3_frm_stat & SUNI_DS3_LOSV));
} else if (iadev->phy_type & FE_E3_PHY ) {
suni_pm7345 = (suni_pm7345_t *)iadev->phy;
- frmr_intr = suni_pm7345->suni_e3_frm_maint_intr_ind;
+ (void) suni_pm7345->suni_e3_frm_maint_intr_ind;
iadev->carrier_detect =
Boolean(!(suni_pm7345->suni_e3_frm_fram_intr_ind_stat&SUNI_E3_LOS));
}
else {
suni = (IA_SUNI *)iadev->phy;
- intr_status = suni->suni_rsop_status & 0xff;
+ (void) suni->suni_rsop_status;
iadev->carrier_detect = Boolean(!(suni->suni_rsop_status & SUNI_LOSV));
}
if (iadev->carrier_detect)
@@ -2660,7 +2656,6 @@
static int ia_open(struct atm_vcc *vcc)
{
- IADEV *iadev;
struct ia_vcc *ia_vcc;
int error;
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
@@ -2668,7 +2663,6 @@
IF_EVENT(printk("ia: not partially allocated resources\n");)
vcc->dev_data = NULL;
}
- iadev = INPH_IA_DEV(vcc->dev);
if (vcc->vci != ATM_VPI_UNSPEC && vcc->vpi != ATM_VCI_UNSPEC)
{
IF_EVENT(printk("iphase open: unspec part\n");)
@@ -3052,11 +3046,9 @@
static int ia_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
IADEV *iadev;
- struct ia_vcc *iavcc;
unsigned long flags;
iadev = INPH_IA_DEV(vcc->dev);
- iavcc = INPH_IA_VCC(vcc);
if ((!skb)||(skb->len>(iadev->tx_buf_sz-sizeof(struct cpcs_trailer))))
{
if (!skb)
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index cd0ff66..5d1d076 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -527,7 +527,6 @@
{
const struct firmware *fw;
const char *fw_name;
- uint32_t data32 = 0;
int blocksize = 0;
int numblocks = 0;
int offset;
@@ -576,7 +575,7 @@
dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
iowrite32(1, card->config_regs + FPGA_MODE);
- data32 = ioread32(card->config_regs + FPGA_MODE);
+ (void) ioread32(card->config_regs + FPGA_MODE);
/* Set mode to Chip Erase */
if(chip == 0 || chip == 2)
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index e9e5238..d57e8d0 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -168,11 +168,4 @@
bool
default n
-config ARCH_NO_SYSDEV_OPS
- bool
- ---help---
- To be selected by architectures that don't use sysdev class or
- sysdev driver power management (suspend/resume) and shutdown
- operations.
-
endmenu
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 19f49e4..a34dca0 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -111,8 +111,6 @@
return drv->bus->match ? drv->bus->match(dev, drv) : 1;
}
-extern void sysdev_shutdown(void);
-
extern char *make_class_name(const char *name, struct kobject *kobj);
extern int devres_release_all(struct device *dev);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 81b78ed..bc8729d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -400,7 +400,7 @@
static int device_add_attrs(struct device *dev)
{
struct class *class = dev->class;
- struct device_type *type = dev->type;
+ const struct device_type *type = dev->type;
int error;
if (class) {
@@ -440,7 +440,7 @@
static void device_remove_attrs(struct device *dev)
{
struct class *class = dev->class;
- struct device_type *type = dev->type;
+ const struct device_type *type = dev->type;
device_remove_groups(dev, dev->groups);
@@ -1314,8 +1314,7 @@
EXPORT_SYMBOL_GPL(device_create_file);
EXPORT_SYMBOL_GPL(device_remove_file);
-struct root_device
-{
+struct root_device {
struct device dev;
struct module *owner;
};
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index da57ee9..6658da7 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -245,6 +245,10 @@
device_lock(dev);
if (dev->driver) {
+ if (klist_node_attached(&dev->p->knode_driver)) {
+ ret = 1;
+ goto out_unlock;
+ }
ret = device_bind_driver(dev);
if (ret == 0)
ret = 1;
@@ -257,6 +261,7 @@
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
pm_runtime_put_sync(dev);
}
+out_unlock:
device_unlock(dev);
return ret;
}
@@ -316,8 +321,7 @@
drv = dev->driver;
if (drv) {
- pm_runtime_get_noresume(dev);
- pm_runtime_barrier(dev);
+ pm_runtime_get_sync(dev);
driver_sysfs_remove(dev);
@@ -326,6 +330,8 @@
BUS_NOTIFY_UNBIND_DRIVER,
dev);
+ pm_runtime_put_sync(dev);
+
if (dev->bus && dev->bus->remove)
dev->bus->remove(dev);
else if (drv->remove)
@@ -338,7 +344,6 @@
BUS_NOTIFY_UNBOUND_DRIVER,
dev);
- pm_runtime_put_sync(dev);
}
}
@@ -408,17 +413,16 @@
}
EXPORT_SYMBOL(dev_get_drvdata);
-void dev_set_drvdata(struct device *dev, void *data)
+int dev_set_drvdata(struct device *dev, void *data)
{
int error;
- if (!dev)
- return;
if (!dev->p) {
error = device_private_init(dev);
if (error)
- return;
+ return error;
}
dev->p->driver_data = data;
+ return 0;
}
EXPORT_SYMBOL(dev_set_drvdata);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8c798ef..bbb03e6 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -521,6 +521,11 @@
if (!firmware_p)
return -EINVAL;
+ if (WARN_ON(usermodehelper_is_disabled())) {
+ dev_err(device, "firmware: %s will not be loaded\n", name);
+ return -EBUSY;
+ }
+
*firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL);
if (!firmware) {
dev_err(device, "%s: kmalloc(struct firmware) failed\n",
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 3da6a43..0a134a4 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -48,7 +48,8 @@
return MEMORY_CLASS_NAME;
}
-static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uevent_env *env)
+static int memory_uevent(struct kset *kset, struct kobject *obj,
+ struct kobj_uevent_env *env)
{
int retval = 0;
@@ -228,10 +229,11 @@
* OK to have direct references to sparsemem variables in here.
*/
static int
-memory_section_action(unsigned long phys_index, unsigned long action)
+memory_block_action(unsigned long phys_index, unsigned long action)
{
int i;
unsigned long start_pfn, start_paddr;
+ unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
struct page *first_page;
int ret;
@@ -243,7 +245,7 @@
* that way.
*/
if (action == MEM_ONLINE) {
- for (i = 0; i < PAGES_PER_SECTION; i++) {
+ for (i = 0; i < nr_pages; i++) {
if (PageReserved(first_page+i))
continue;
@@ -257,12 +259,12 @@
switch (action) {
case MEM_ONLINE:
start_pfn = page_to_pfn(first_page);
- ret = online_pages(start_pfn, PAGES_PER_SECTION);
+ ret = online_pages(start_pfn, nr_pages);
break;
case MEM_OFFLINE:
start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
ret = remove_memory(start_paddr,
- PAGES_PER_SECTION << PAGE_SHIFT);
+ nr_pages << PAGE_SHIFT);
break;
default:
WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: "
@@ -276,7 +278,7 @@
static int memory_block_change_state(struct memory_block *mem,
unsigned long to_state, unsigned long from_state_req)
{
- int i, ret = 0;
+ int ret = 0;
mutex_lock(&mem->state_mutex);
@@ -288,20 +290,11 @@
if (to_state == MEM_OFFLINE)
mem->state = MEM_GOING_OFFLINE;
- for (i = 0; i < sections_per_block; i++) {
- ret = memory_section_action(mem->start_section_nr + i,
- to_state);
- if (ret)
- break;
- }
+ ret = memory_block_action(mem->start_section_nr, to_state);
- if (ret) {
- for (i = 0; i < sections_per_block; i++)
- memory_section_action(mem->start_section_nr + i,
- from_state_req);
-
+ if (ret)
mem->state = from_state_req;
- } else
+ else
mem->state = to_state;
out:
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 9e0e4fc..1c291af 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -192,18 +192,18 @@
int platform_device_add_resources(struct platform_device *pdev,
const struct resource *res, unsigned int num)
{
- struct resource *r;
+ struct resource *r = NULL;
- if (!res)
- return 0;
-
- r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
- if (r) {
- pdev->resource = r;
- pdev->num_resources = num;
- return 0;
+ if (res) {
+ r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
+ if (!r)
+ return -ENOMEM;
}
- return -ENOMEM;
+
+ kfree(pdev->resource);
+ pdev->resource = r;
+ pdev->num_resources = num;
+ return 0;
}
EXPORT_SYMBOL_GPL(platform_device_add_resources);
@@ -220,17 +220,17 @@
int platform_device_add_data(struct platform_device *pdev, const void *data,
size_t size)
{
- void *d;
+ void *d = NULL;
- if (!data)
- return 0;
-
- d = kmemdup(data, size, GFP_KERNEL);
- if (d) {
- pdev->dev.platform_data = d;
- return 0;
+ if (data) {
+ d = kmemdup(data, size, GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
}
- return -ENOMEM;
+
+ kfree(pdev->dev.platform_data);
+ pdev->dev.platform_data = d;
+ return 0;
}
EXPORT_SYMBOL_GPL(platform_device_add_data);
@@ -667,7 +667,7 @@
return ret;
}
-static int platform_pm_prepare(struct device *dev)
+int platform_pm_prepare(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -678,7 +678,7 @@
return ret;
}
-static void platform_pm_complete(struct device *dev)
+void platform_pm_complete(struct device *dev)
{
struct device_driver *drv = dev->driver;
@@ -686,16 +686,11 @@
drv->pm->complete(dev);
}
-#else /* !CONFIG_PM_SLEEP */
-
-#define platform_pm_prepare NULL
-#define platform_pm_complete NULL
-
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_SUSPEND
-int __weak platform_pm_suspend(struct device *dev)
+int platform_pm_suspend(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -713,7 +708,7 @@
return ret;
}
-int __weak platform_pm_suspend_noirq(struct device *dev)
+int platform_pm_suspend_noirq(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -729,7 +724,7 @@
return ret;
}
-int __weak platform_pm_resume(struct device *dev)
+int platform_pm_resume(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -747,7 +742,7 @@
return ret;
}
-int __weak platform_pm_resume_noirq(struct device *dev)
+int platform_pm_resume_noirq(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -763,18 +758,11 @@
return ret;
}
-#else /* !CONFIG_SUSPEND */
-
-#define platform_pm_suspend NULL
-#define platform_pm_resume NULL
-#define platform_pm_suspend_noirq NULL
-#define platform_pm_resume_noirq NULL
-
-#endif /* !CONFIG_SUSPEND */
+#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATE_CALLBACKS
-static int platform_pm_freeze(struct device *dev)
+int platform_pm_freeze(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -792,7 +780,7 @@
return ret;
}
-static int platform_pm_freeze_noirq(struct device *dev)
+int platform_pm_freeze_noirq(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -808,7 +796,7 @@
return ret;
}
-static int platform_pm_thaw(struct device *dev)
+int platform_pm_thaw(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -826,7 +814,7 @@
return ret;
}
-static int platform_pm_thaw_noirq(struct device *dev)
+int platform_pm_thaw_noirq(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -842,7 +830,7 @@
return ret;
}
-static int platform_pm_poweroff(struct device *dev)
+int platform_pm_poweroff(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -860,7 +848,7 @@
return ret;
}
-static int platform_pm_poweroff_noirq(struct device *dev)
+int platform_pm_poweroff_noirq(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -876,7 +864,7 @@
return ret;
}
-static int platform_pm_restore(struct device *dev)
+int platform_pm_restore(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -894,7 +882,7 @@
return ret;
}
-static int platform_pm_restore_noirq(struct device *dev)
+int platform_pm_restore_noirq(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
@@ -910,62 +898,13 @@
return ret;
}
-#else /* !CONFIG_HIBERNATE_CALLBACKS */
-
-#define platform_pm_freeze NULL
-#define platform_pm_thaw NULL
-#define platform_pm_poweroff NULL
-#define platform_pm_restore NULL
-#define platform_pm_freeze_noirq NULL
-#define platform_pm_thaw_noirq NULL
-#define platform_pm_poweroff_noirq NULL
-#define platform_pm_restore_noirq NULL
-
-#endif /* !CONFIG_HIBERNATE_CALLBACKS */
-
-#ifdef CONFIG_PM_RUNTIME
-
-int __weak platform_pm_runtime_suspend(struct device *dev)
-{
- return pm_generic_runtime_suspend(dev);
-};
-
-int __weak platform_pm_runtime_resume(struct device *dev)
-{
- return pm_generic_runtime_resume(dev);
-};
-
-int __weak platform_pm_runtime_idle(struct device *dev)
-{
- return pm_generic_runtime_idle(dev);
-};
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define platform_pm_runtime_suspend NULL
-#define platform_pm_runtime_resume NULL
-#define platform_pm_runtime_idle NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
static const struct dev_pm_ops platform_dev_pm_ops = {
- .prepare = platform_pm_prepare,
- .complete = platform_pm_complete,
- .suspend = platform_pm_suspend,
- .resume = platform_pm_resume,
- .freeze = platform_pm_freeze,
- .thaw = platform_pm_thaw,
- .poweroff = platform_pm_poweroff,
- .restore = platform_pm_restore,
- .suspend_noirq = platform_pm_suspend_noirq,
- .resume_noirq = platform_pm_resume_noirq,
- .freeze_noirq = platform_pm_freeze_noirq,
- .thaw_noirq = platform_pm_thaw_noirq,
- .poweroff_noirq = platform_pm_poweroff_noirq,
- .restore_noirq = platform_pm_restore_noirq,
- .runtime_suspend = platform_pm_runtime_suspend,
- .runtime_resume = platform_pm_runtime_resume,
- .runtime_idle = platform_pm_runtime_idle,
+ .runtime_suspend = pm_generic_runtime_suspend,
+ .runtime_resume = pm_generic_runtime_resume,
+ .runtime_idle = pm_generic_runtime_idle,
+ USE_PLATFORM_PM_SLEEP_OPS
};
struct bus_type platform_bus_type = {
@@ -977,41 +916,6 @@
};
EXPORT_SYMBOL_GPL(platform_bus_type);
-/**
- * platform_bus_get_pm_ops() - return pointer to busses dev_pm_ops
- *
- * This function can be used by platform code to get the current
- * set of dev_pm_ops functions used by the platform_bus_type.
- */
-const struct dev_pm_ops * __init platform_bus_get_pm_ops(void)
-{
- return platform_bus_type.pm;
-}
-
-/**
- * platform_bus_set_pm_ops() - update dev_pm_ops for the platform_bus_type
- *
- * @pm: pointer to new dev_pm_ops struct to be used for platform_bus_type
- *
- * Platform code can override the dev_pm_ops methods of
- * platform_bus_type by using this function. It is expected that
- * platform code will first do a platform_bus_get_pm_ops(), then
- * kmemdup it, then customize selected methods and pass a pointer to
- * the new struct dev_pm_ops to this function.
- *
- * Since platform-specific code is customizing methods for *all*
- * devices (not just platform-specific devices) it is expected that
- * any custom overrides of these functions will keep existing behavior
- * and simply extend it. For example, any customization of the
- * runtime PM methods should continue to call the pm_generic_*
- * functions as the default ones do in addition to the
- * platform-specific behavior.
- */
-void __init platform_bus_set_pm_ops(const struct dev_pm_ops *pm)
-{
- platform_bus_type.pm = pm;
-}
-
int __init platform_bus_init(void)
{
int error;
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 118c1b9..3647e11 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -3,6 +3,6 @@
obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
obj-$(CONFIG_PM_OPP) += opp.o
+obj-$(CONFIG_HAVE_CLK) += clock_ops.o
-ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
-ccflags-$(CONFIG_PM_VERBOSE) += -DDEBUG
+ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
\ No newline at end of file
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
new file mode 100644
index 0000000..c0dd09d
--- /dev/null
+++ b/drivers/base/power/clock_ops.c
@@ -0,0 +1,431 @@
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+struct pm_runtime_clk_data {
+ struct list_head clock_list;
+ struct mutex lock;
+};
+
+enum pce_status {
+ PCE_STATUS_NONE = 0,
+ PCE_STATUS_ACQUIRED,
+ PCE_STATUS_ENABLED,
+ PCE_STATUS_ERROR,
+};
+
+struct pm_clock_entry {
+ struct list_head node;
+ char *con_id;
+ struct clk *clk;
+ enum pce_status status;
+};
+
+static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+{
+ return dev ? dev->power.subsys_data : NULL;
+}
+
+/**
+ * pm_runtime_clk_add - Start using a device clock for runtime PM.
+ * @dev: Device whose clock is going to be used for runtime PM.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the runtime PM of @dev.
+ */
+int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!prd)
+ return -EINVAL;
+
+ ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+ if (!ce) {
+ dev_err(dev, "Not enough memory for clock entry.\n");
+ return -ENOMEM;
+ }
+
+ if (con_id) {
+ ce->con_id = kstrdup(con_id, GFP_KERNEL);
+ if (!ce->con_id) {
+ dev_err(dev,
+ "Not enough memory for clock connection ID.\n");
+ kfree(ce);
+ return -ENOMEM;
+ }
+ }
+
+ mutex_lock(&prd->lock);
+ list_add_tail(&ce->node, &prd->clock_list);
+ mutex_unlock(&prd->lock);
+ return 0;
+}
+
+/**
+ * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
+ * @ce: Runtime PM clock entry to destroy.
+ *
+ * This routine must be called under the mutex protecting the runtime PM list
+ * of clocks corresponding the the @ce's device.
+ */
+static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+{
+ if (!ce)
+ return;
+
+ list_del(&ce->node);
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
+
+ if (ce->status >= PCE_STATUS_ACQUIRED)
+ clk_put(ce->clk);
+ }
+
+ if (ce->con_id)
+ kfree(ce->con_id);
+
+ kfree(ce);
+}
+
+/**
+ * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
+ * @dev: Device whose clock should not be used for runtime PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the runtime PM of @dev.
+ */
+void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!prd)
+ return;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry(ce, &prd->clock_list, node) {
+ if (!con_id && !ce->con_id) {
+ __pm_runtime_clk_remove(ce);
+ break;
+ } else if (!con_id || !ce->con_id) {
+ continue;
+ } else if (!strcmp(con_id, ce->con_id)) {
+ __pm_runtime_clk_remove(ce);
+ break;
+ }
+ }
+
+ mutex_unlock(&prd->lock);
+}
+
+/**
+ * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
+ * @dev: Device to initialize the list of runtime PM clocks for.
+ *
+ * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * make the @dev's power.subsys_data field point to it.
+ */
+int pm_runtime_clk_init(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd;
+
+ prd = kzalloc(sizeof(*prd), GFP_KERNEL);
+ if (!prd) {
+ dev_err(dev, "Not enough memory fo runtime PM data.\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&prd->clock_list);
+ mutex_init(&prd->lock);
+ dev->power.subsys_data = prd;
+ return 0;
+}
+
+/**
+ * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
+ * @dev: Device to destroy the list of runtime PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * that object.
+ */
+void pm_runtime_clk_destroy(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce, *c;
+
+ if (!prd)
+ return;
+
+ dev->power.subsys_data = NULL;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
+ __pm_runtime_clk_remove(ce);
+
+ mutex_unlock(&prd->lock);
+
+ kfree(prd);
+}
+
+/**
+ * pm_runtime_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @con_id: Connection ID of the clock.
+ */
+static void pm_runtime_clk_acquire(struct device *dev,
+ struct pm_clock_entry *ce)
+{
+ ce->clk = clk_get(dev, ce->con_id);
+ if (IS_ERR(ce->clk)) {
+ ce->status = PCE_STATUS_ERROR;
+ } else {
+ ce->status = PCE_STATUS_ACQUIRED;
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+ }
+}
+
+/**
+ * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_runtime_clk_suspend(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!prd)
+ return 0;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+ if (ce->status == PCE_STATUS_NONE)
+ pm_runtime_clk_acquire(dev, ce);
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ clk_disable(ce->clk);
+ ce->status = PCE_STATUS_ACQUIRED;
+ }
+ }
+
+ mutex_unlock(&prd->lock);
+
+ return 0;
+}
+
+/**
+ * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_runtime_clk_resume(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!prd)
+ return 0;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry(ce, &prd->clock_list, node) {
+ if (ce->status == PCE_STATUS_NONE)
+ pm_runtime_clk_acquire(dev, ce);
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ clk_enable(ce->clk);
+ ce->status = PCE_STATUS_ENABLED;
+ }
+ }
+
+ mutex_unlock(&prd->lock);
+
+ return 0;
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pwr_domain member of that object is copied to the device's
+ * pwr_domain field and its con_ids member is used to populate the device's list
+ * of runtime PM clocks, depending on @action.
+ *
+ * If the device's pwr_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char *con_id;
+ int error;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (dev->pwr_domain)
+ break;
+
+ error = pm_runtime_clk_init(dev);
+ if (error)
+ break;
+
+ dev->pwr_domain = clknb->pwr_domain;
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+ pm_runtime_clk_add(dev, con_id);
+ } else {
+ pm_runtime_clk_add(dev, NULL);
+ }
+
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (dev->pwr_domain != clknb->pwr_domain)
+ break;
+
+ dev->pwr_domain = NULL;
+ pm_runtime_clk_destroy(dev);
+ break;
+ }
+
+ return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_enable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+ }
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_disable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+ }
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char *con_id;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+ enable_clock(dev, con_id);
+ } else {
+ enable_clock(dev, NULL);
+ }
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+ disable_clock(dev, con_id);
+ } else {
+ disable_clock(dev, NULL);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+/**
+ * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_runtime_clk_notify(). However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_runtime_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb)
+{
+ if (!bus || !clknb)
+ return;
+
+ clknb->nb.notifier_call = pm_runtime_clk_notify;
+ bus_register_notifier(bus, &clknb->nb);
+}
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 42f97f9..cb3bb36 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -74,6 +74,23 @@
#ifdef CONFIG_PM_SLEEP
/**
+ * pm_generic_prepare - Generic routine preparing a device for power transition.
+ * @dev: Device to prepare.
+ *
+ * Prepare a device for a system-wide power transition.
+ */
+int pm_generic_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+/**
* __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback.
* @dev: Device to handle.
* @event: PM transition of the system under way.
@@ -213,16 +230,38 @@
return __pm_generic_resume(dev, PM_EVENT_RESTORE);
}
EXPORT_SYMBOL_GPL(pm_generic_restore);
+
+/**
+ * pm_generic_complete - Generic routine competing a device power transition.
+ * @dev: Device to handle.
+ *
+ * Complete a device power transition during a system-wide power transition.
+ */
+void pm_generic_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+
+ /*
+ * Let runtime PM try to suspend devices that haven't been in use before
+ * going into the system-wide sleep state we're resuming from.
+ */
+ pm_runtime_idle(dev);
+}
#endif /* CONFIG_PM_SLEEP */
struct dev_pm_ops generic_subsys_pm_ops = {
#ifdef CONFIG_PM_SLEEP
+ .prepare = pm_generic_prepare,
.suspend = pm_generic_suspend,
.resume = pm_generic_resume,
.freeze = pm_generic_freeze,
.thaw = pm_generic_thaw,
.poweroff = pm_generic_poweroff,
.restore = pm_generic_restore,
+ .complete = pm_generic_complete,
#endif
#ifdef CONFIG_PM_RUNTIME
.runtime_suspend = pm_generic_runtime_suspend,
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index abe3ab7..aa632020 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -426,10 +426,8 @@
if (dev->pwr_domain) {
pm_dev_dbg(dev, state, "EARLY power domain ");
- pm_noirq_op(dev, &dev->pwr_domain->ops, state);
- }
-
- if (dev->type && dev->type->pm) {
+ error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+ } else if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "EARLY type ");
error = pm_noirq_op(dev, dev->type->pm, state);
} else if (dev->class && dev->class->pm) {
@@ -517,7 +515,8 @@
if (dev->pwr_domain) {
pm_dev_dbg(dev, state, "power domain ");
- pm_op(dev, &dev->pwr_domain->ops, state);
+ error = pm_op(dev, &dev->pwr_domain->ops, state);
+ goto End;
}
if (dev->type && dev->type->pm) {
@@ -580,11 +579,13 @@
* Execute the appropriate "resume" callback for all devices whose status
* indicates that they are suspended.
*/
-static void dpm_resume(pm_message_t state)
+void dpm_resume(pm_message_t state)
{
struct device *dev;
ktime_t starttime = ktime_get();
+ might_sleep();
+
mutex_lock(&dpm_list_mtx);
pm_transition = state;
async_error = 0;
@@ -629,12 +630,11 @@
{
device_lock(dev);
- if (dev->pwr_domain && dev->pwr_domain->ops.complete) {
+ if (dev->pwr_domain) {
pm_dev_dbg(dev, state, "completing power domain ");
- dev->pwr_domain->ops.complete(dev);
- }
-
- if (dev->type && dev->type->pm) {
+ if (dev->pwr_domain->ops.complete)
+ dev->pwr_domain->ops.complete(dev);
+ } else if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "completing type ");
if (dev->type->pm->complete)
dev->type->pm->complete(dev);
@@ -658,10 +658,12 @@
* Execute the ->complete() callbacks for all devices whose PM status is not
* DPM_ON (this allows new devices to be registered).
*/
-static void dpm_complete(pm_message_t state)
+void dpm_complete(pm_message_t state)
{
struct list_head list;
+ might_sleep();
+
INIT_LIST_HEAD(&list);
mutex_lock(&dpm_list_mtx);
while (!list_empty(&dpm_prepared_list)) {
@@ -690,7 +692,6 @@
*/
void dpm_resume_end(pm_message_t state)
{
- might_sleep();
dpm_resume(state);
dpm_complete(state);
}
@@ -732,7 +733,12 @@
{
int error;
- if (dev->type && dev->type->pm) {
+ if (dev->pwr_domain) {
+ pm_dev_dbg(dev, state, "LATE power domain ");
+ error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+ if (error)
+ return error;
+ } else if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "LATE type ");
error = pm_noirq_op(dev, dev->type->pm, state);
if (error)
@@ -749,11 +755,6 @@
return error;
}
- if (dev->pwr_domain) {
- pm_dev_dbg(dev, state, "LATE power domain ");
- pm_noirq_op(dev, &dev->pwr_domain->ops, state);
- }
-
return 0;
}
@@ -841,21 +842,27 @@
goto End;
}
+ if (dev->pwr_domain) {
+ pm_dev_dbg(dev, state, "power domain ");
+ error = pm_op(dev, &dev->pwr_domain->ops, state);
+ goto End;
+ }
+
if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "type ");
error = pm_op(dev, dev->type->pm, state);
- goto Domain;
+ goto End;
}
if (dev->class) {
if (dev->class->pm) {
pm_dev_dbg(dev, state, "class ");
error = pm_op(dev, dev->class->pm, state);
- goto Domain;
+ goto End;
} else if (dev->class->suspend) {
pm_dev_dbg(dev, state, "legacy class ");
error = legacy_suspend(dev, state, dev->class->suspend);
- goto Domain;
+ goto End;
}
}
@@ -869,12 +876,6 @@
}
}
- Domain:
- if (!error && dev->pwr_domain) {
- pm_dev_dbg(dev, state, "power domain ");
- pm_op(dev, &dev->pwr_domain->ops, state);
- }
-
End:
device_unlock(dev);
complete_all(&dev->power.completion);
@@ -914,11 +915,13 @@
* dpm_suspend - Execute "suspend" callbacks for all non-sysdev devices.
* @state: PM transition of the system being carried out.
*/
-static int dpm_suspend(pm_message_t state)
+int dpm_suspend(pm_message_t state)
{
ktime_t starttime = ktime_get();
int error = 0;
+ might_sleep();
+
mutex_lock(&dpm_list_mtx);
pm_transition = state;
async_error = 0;
@@ -965,7 +968,14 @@
device_lock(dev);
- if (dev->type && dev->type->pm) {
+ if (dev->pwr_domain) {
+ pm_dev_dbg(dev, state, "preparing power domain ");
+ if (dev->pwr_domain->ops.prepare)
+ error = dev->pwr_domain->ops.prepare(dev);
+ suspend_report_result(dev->pwr_domain->ops.prepare, error);
+ if (error)
+ goto End;
+ } else if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "preparing type ");
if (dev->type->pm->prepare)
error = dev->type->pm->prepare(dev);
@@ -984,13 +994,6 @@
if (dev->bus->pm->prepare)
error = dev->bus->pm->prepare(dev);
suspend_report_result(dev->bus->pm->prepare, error);
- if (error)
- goto End;
- }
-
- if (dev->pwr_domain && dev->pwr_domain->ops.prepare) {
- pm_dev_dbg(dev, state, "preparing power domain ");
- dev->pwr_domain->ops.prepare(dev);
}
End:
@@ -1005,10 +1008,12 @@
*
* Execute the ->prepare() callback(s) for all devices.
*/
-static int dpm_prepare(pm_message_t state)
+int dpm_prepare(pm_message_t state)
{
int error = 0;
+ might_sleep();
+
mutex_lock(&dpm_list_mtx);
while (!list_empty(&dpm_list)) {
struct device *dev = to_device(dpm_list.next);
@@ -1057,7 +1062,6 @@
{
int error;
- might_sleep();
error = dpm_prepare(state);
if (!error)
error = dpm_suspend(state);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 3172c60d..0d4587b 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -168,7 +168,6 @@
static int rpm_idle(struct device *dev, int rpmflags)
{
int (*callback)(struct device *);
- int (*domain_callback)(struct device *);
int retval;
retval = rpm_check_suspend_allowed(dev);
@@ -214,7 +213,9 @@
dev->power.idle_notification = true;
- if (dev->type && dev->type->pm)
+ if (dev->pwr_domain)
+ callback = dev->pwr_domain->ops.runtime_idle;
+ else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_idle;
else if (dev->class && dev->class->pm)
callback = dev->class->pm->runtime_idle;
@@ -223,19 +224,10 @@
else
callback = NULL;
- if (dev->pwr_domain)
- domain_callback = dev->pwr_domain->ops.runtime_idle;
- else
- domain_callback = NULL;
-
- if (callback || domain_callback) {
+ if (callback) {
spin_unlock_irq(&dev->power.lock);
- if (domain_callback)
- retval = domain_callback(dev);
-
- if (!retval && callback)
- callback(dev);
+ callback(dev);
spin_lock_irq(&dev->power.lock);
}
@@ -382,7 +374,9 @@
__update_runtime_status(dev, RPM_SUSPENDING);
- if (dev->type && dev->type->pm)
+ if (dev->pwr_domain)
+ callback = dev->pwr_domain->ops.runtime_suspend;
+ else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_suspend;
else if (dev->class && dev->class->pm)
callback = dev->class->pm->runtime_suspend;
@@ -400,8 +394,6 @@
else
pm_runtime_cancel_pending(dev);
} else {
- if (dev->pwr_domain)
- rpm_callback(dev->pwr_domain->ops.runtime_suspend, dev);
no_callback:
__update_runtime_status(dev, RPM_SUSPENDED);
pm_runtime_deactivate_timer(dev);
@@ -582,9 +574,8 @@
__update_runtime_status(dev, RPM_RESUMING);
if (dev->pwr_domain)
- rpm_callback(dev->pwr_domain->ops.runtime_resume, dev);
-
- if (dev->type && dev->type->pm)
+ callback = dev->pwr_domain->ops.runtime_resume;
+ else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_resume;
else if (dev->class && dev->class->pm)
callback = dev->class->pm->runtime_resume;
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index fff49be..a9f5b89 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -212,8 +212,9 @@
static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
autosuspend_delay_ms_store);
-#endif
+#endif /* CONFIG_PM_RUNTIME */
+#ifdef CONFIG_PM_SLEEP
static ssize_t
wake_show(struct device * dev, struct device_attribute *attr, char * buf)
{
@@ -248,7 +249,6 @@
static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
-#ifdef CONFIG_PM_SLEEP
static ssize_t wakeup_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index abbbd33..84f7c7d 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -110,7 +110,6 @@
spin_lock_irq(&events_lock);
list_add_rcu(&ws->entry, &wakeup_sources);
spin_unlock_irq(&events_lock);
- synchronize_rcu();
}
EXPORT_SYMBOL_GPL(wakeup_source_add);
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index acde9b5..9dff77b 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -328,203 +328,8 @@
kobject_put(&sysdev->kobj);
}
-
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-/**
- * sysdev_shutdown - Shut down all system devices.
- *
- * Loop over each class of system devices, and the devices in each
- * of those classes. For each device, we call the shutdown method for
- * each driver registered for the device - the auxiliaries,
- * and the class driver.
- *
- * Note: The list is iterated in reverse order, so that we shut down
- * child devices before we shut down their parents. The list ordering
- * is guaranteed by virtue of the fact that child devices are registered
- * after their parents.
- */
-void sysdev_shutdown(void)
-{
- struct sysdev_class *cls;
-
- pr_debug("Shutting Down System Devices\n");
-
- mutex_lock(&sysdev_drivers_lock);
- list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
- struct sys_device *sysdev;
-
- pr_debug("Shutting down type '%s':\n",
- kobject_name(&cls->kset.kobj));
-
- list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
- struct sysdev_driver *drv;
- pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
- /* Call auxiliary drivers first */
- list_for_each_entry(drv, &cls->drivers, entry) {
- if (drv->shutdown)
- drv->shutdown(sysdev);
- }
-
- /* Now call the generic one */
- if (cls->shutdown)
- cls->shutdown(sysdev);
- }
- }
- mutex_unlock(&sysdev_drivers_lock);
-}
-
-static void __sysdev_resume(struct sys_device *dev)
-{
- struct sysdev_class *cls = dev->cls;
- struct sysdev_driver *drv;
-
- /* First, call the class-specific one */
- if (cls->resume)
- cls->resume(dev);
- WARN_ONCE(!irqs_disabled(),
- "Interrupts enabled after %pF\n", cls->resume);
-
- /* Call auxiliary drivers next. */
- list_for_each_entry(drv, &cls->drivers, entry) {
- if (drv->resume)
- drv->resume(dev);
- WARN_ONCE(!irqs_disabled(),
- "Interrupts enabled after %pF\n", drv->resume);
- }
-}
-
-/**
- * sysdev_suspend - Suspend all system devices.
- * @state: Power state to enter.
- *
- * We perform an almost identical operation as sysdev_shutdown()
- * above, though calling ->suspend() instead. Interrupts are disabled
- * when this called. Devices are responsible for both saving state and
- * quiescing or powering down the device.
- *
- * This is only called by the device PM core, so we let them handle
- * all synchronization.
- */
-int sysdev_suspend(pm_message_t state)
-{
- struct sysdev_class *cls;
- struct sys_device *sysdev, *err_dev;
- struct sysdev_driver *drv, *err_drv;
- int ret;
-
- pr_debug("Checking wake-up interrupts\n");
-
- /* Return error code if there are any wake-up interrupts pending */
- ret = check_wakeup_irqs();
- if (ret)
- return ret;
-
- WARN_ONCE(!irqs_disabled(),
- "Interrupts enabled while suspending system devices\n");
-
- pr_debug("Suspending System Devices\n");
-
- list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
- pr_debug("Suspending type '%s':\n",
- kobject_name(&cls->kset.kobj));
-
- list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
- pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
- /* Call auxiliary drivers first */
- list_for_each_entry(drv, &cls->drivers, entry) {
- if (drv->suspend) {
- ret = drv->suspend(sysdev, state);
- if (ret)
- goto aux_driver;
- }
- WARN_ONCE(!irqs_disabled(),
- "Interrupts enabled after %pF\n",
- drv->suspend);
- }
-
- /* Now call the generic one */
- if (cls->suspend) {
- ret = cls->suspend(sysdev, state);
- if (ret)
- goto cls_driver;
- WARN_ONCE(!irqs_disabled(),
- "Interrupts enabled after %pF\n",
- cls->suspend);
- }
- }
- }
- return 0;
- /* resume current sysdev */
-cls_driver:
- drv = NULL;
- printk(KERN_ERR "Class suspend failed for %s: %d\n",
- kobject_name(&sysdev->kobj), ret);
-
-aux_driver:
- if (drv)
- printk(KERN_ERR "Class driver suspend failed for %s: %d\n",
- kobject_name(&sysdev->kobj), ret);
- list_for_each_entry(err_drv, &cls->drivers, entry) {
- if (err_drv == drv)
- break;
- if (err_drv->resume)
- err_drv->resume(sysdev);
- }
-
- /* resume other sysdevs in current class */
- list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
- if (err_dev == sysdev)
- break;
- pr_debug(" %s\n", kobject_name(&err_dev->kobj));
- __sysdev_resume(err_dev);
- }
-
- /* resume other classes */
- list_for_each_entry_continue(cls, &system_kset->list, kset.kobj.entry) {
- list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
- pr_debug(" %s\n", kobject_name(&err_dev->kobj));
- __sysdev_resume(err_dev);
- }
- }
- return ret;
-}
-EXPORT_SYMBOL_GPL(sysdev_suspend);
-
-/**
- * sysdev_resume - Bring system devices back to life.
- *
- * Similar to sysdev_suspend(), but we iterate the list forwards
- * to guarantee that parent devices are resumed before their children.
- *
- * Note: Interrupts are disabled when called.
- */
-int sysdev_resume(void)
-{
- struct sysdev_class *cls;
-
- WARN_ONCE(!irqs_disabled(),
- "Interrupts enabled while resuming system devices\n");
-
- pr_debug("Resuming System Devices\n");
-
- list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
- struct sys_device *sysdev;
-
- pr_debug("Resuming type '%s':\n",
- kobject_name(&cls->kset.kobj));
-
- list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
- pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
- __sysdev_resume(sysdev);
- }
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(sysdev_resume);
-#endif /* CONFIG_ARCH_NO_SYSDEV_OPS */
+EXPORT_SYMBOL_GPL(sysdev_register);
+EXPORT_SYMBOL_GPL(sysdev_unregister);
int __init system_bus_init(void)
{
@@ -534,9 +339,6 @@
return 0;
}
-EXPORT_SYMBOL_GPL(sysdev_register);
-EXPORT_SYMBOL_GPL(sysdev_unregister);
-
#define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr)
ssize_t sysdev_store_ulong(struct sys_device *sysdev,
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 0000000..353781b
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,33 @@
+config BCMA_POSSIBLE
+ bool
+ depends on HAS_IOMEM && HAS_DMA
+ default y
+
+menu "Broadcom specific AMBA"
+ depends on BCMA_POSSIBLE
+
+config BCMA
+ tristate "BCMA support"
+ depends on BCMA_POSSIBLE
+ help
+ Bus driver for Broadcom specific Advanced Microcontroller Bus
+ Architecture.
+
+config BCMA_HOST_PCI_POSSIBLE
+ bool
+ depends on BCMA && PCI = y
+ default y
+
+config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
+
+config BCMA_DEBUG
+ bool "BCMA debugging"
+ depends on BCMA
+ help
+ This turns on additional debugging messages.
+
+ If unsure, say N
+
+endmenu
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
new file mode 100644
index 0000000..0d56245
--- /dev/null
+++ b/drivers/bcma/Makefile
@@ -0,0 +1,7 @@
+bcma-y += main.o scan.o core.o
+bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-y += driver_pci.o
+bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+obj-$(CONFIG_BCMA) += bcma.o
+
+ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
diff --git a/drivers/bcma/README b/drivers/bcma/README
new file mode 100644
index 0000000..f7e7ce4
--- /dev/null
+++ b/drivers/bcma/README
@@ -0,0 +1,19 @@
+Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
+however from programming point of view there is nothing AMBA specific we use.
+
+Standard AMBA drivers are platform specific, have hardcoded addresses and use
+AMBA standard fields like CID and PID.
+
+In case of Broadcom's cards every device consists of:
+1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
+ as standard AMBA device. Reading it's CID or PID can cause machine lockup.
+2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
+ and PIDs (0x103BB369), but we do not use that info for anything. One of that
+ devices is used for managing Broadcom specific core.
+
+Addresses of AMBA devices are not hardcoded in driver and have to be read from
+EPROM.
+
+In this situation we decided to introduce separated bus. It can contain up to
+16 devices identified by Broadcom specific fields: manufacturer, id, revision
+and class.
diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO
new file mode 100644
index 0000000..da7aa99
--- /dev/null
+++ b/drivers/bcma/TODO
@@ -0,0 +1,3 @@
+- Interrupts
+- Defines for PCI core driver
+- Create kernel Documentation (use info from README)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
new file mode 100644
index 0000000..2f72e9c
--- /dev/null
+++ b/drivers/bcma/bcma_private.h
@@ -0,0 +1,28 @@
+#ifndef LINUX_BCMA_PRIVATE_H_
+#define LINUX_BCMA_PRIVATE_H_
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+
+#define BCMA_CORE_SIZE 0x1000
+
+struct bcma_bus;
+
+/* main.c */
+extern int bcma_bus_register(struct bcma_bus *bus);
+extern void bcma_bus_unregister(struct bcma_bus *bus);
+
+/* scan.c */
+int bcma_bus_scan(struct bcma_bus *bus);
+
+#ifdef CONFIG_BCMA_HOST_PCI
+/* host_pci.c */
+extern int __init bcma_host_pci_init(void);
+extern void __exit bcma_host_pci_exit(void);
+#endif /* CONFIG_BCMA_HOST_PCI */
+
+#endif
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
new file mode 100644
index 0000000..ced379f
--- /dev/null
+++ b/drivers/bcma/core.c
@@ -0,0 +1,51 @@
+/*
+ * Broadcom specific AMBA
+ * Core ops
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+bool bcma_core_is_enabled(struct bcma_device *core)
+{
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+ != BCMA_IOCTL_CLK)
+ return false;
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return false;
+ return true;
+}
+EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
+
+static void bcma_core_disable(struct bcma_device *core, u32 flags)
+{
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+ bcma_awrite32(core, BCMA_IOCTL, flags);
+ bcma_aread32(core, BCMA_IOCTL);
+ udelay(10);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ udelay(1);
+}
+
+int bcma_core_enable(struct bcma_device *core, u32 flags)
+{
+ bcma_core_disable(core, flags);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+ bcma_aread32(core, BCMA_IOCTL);
+ udelay(1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_core_enable);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
new file mode 100644
index 0000000..6061022
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon.c
@@ -0,0 +1,89 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+ u32 mask, u32 value)
+{
+ value &= mask;
+ value |= bcma_cc_read32(cc, offset) & ~mask;
+ bcma_cc_write32(cc, offset, value);
+
+ return value;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+ if (cc->core->id.rev >= 11)
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+ if (cc->core->id.rev >= 35)
+ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
+ if (cc->core->id.rev >= 20) {
+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+ bcma_pmu_init(cc);
+ if (cc->capabilities & BCMA_CC_CAP_PCTL)
+ pr_err("Power control not implemented!\n");
+}
+
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+{
+ /* instant NMI */
+ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+}
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
+}
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
+{
+ return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
+}
+
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
+{
+ return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+}
+
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+}
+
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+}
+
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+}
+
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+}
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
new file mode 100644
index 0000000..f44177a
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -0,0 +1,134 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+ u32 offset, u32 mask, u32 set)
+{
+ u32 value;
+
+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+ value &= mask;
+ value |= set;
+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+}
+
+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ case 0x4331:
+ case 43224:
+ case 43225:
+ break;
+ default:
+ pr_err("PLL init unknown for device 0x%04X\n",
+ bus->chipinfo.id);
+ }
+}
+
+static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+ u32 min_msk = 0, max_msk = 0;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
+ case 43224:
+ break;
+ default:
+ pr_err("PMU resource config unknown for device 0x%04X\n",
+ bus->chipinfo.id);
+ }
+
+ /* Set the resource masks. */
+ if (min_msk)
+ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+ if (max_msk)
+ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+}
+
+void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ case 0x4331:
+ case 43224:
+ break;
+ default:
+ pr_err("PMU switch/regulators init unknown for device "
+ "0x%04X\n", bus->chipinfo.id);
+ }
+}
+
+void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+ break;
+ case 0x4331:
+ pr_err("Enabling Ext PA lines not implemented\n");
+ break;
+ case 43224:
+ if (bus->chipinfo.rev == 0) {
+ pr_err("Workarounds for 43224 rev 0 not fully "
+ "implemented\n");
+ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ } else {
+ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ }
+ break;
+ default:
+ pr_err("Workarounds unknown for device 0x%04X\n",
+ bus->chipinfo.id);
+ }
+}
+
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
+ u32 pmucap;
+
+ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+ pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+ pmucap);
+
+ if (cc->pmu.rev == 1)
+ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+ ~BCMA_CC_PMU_CTL_NOILPONW);
+ else
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
+ if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+ pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+
+ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+ bcma_pmu_swreg_init(cc);
+ bcma_pmu_workarounds(cc);
+}
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
new file mode 100644
index 0000000..e757e4e
--- /dev/null
+++ b/drivers/bcma/driver_pci.c
@@ -0,0 +1,163 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+{
+ pcicore_write32(pc, 0x130, address);
+ pcicore_read32(pc, 0x130);
+ return pcicore_read32(pc, 0x134);
+}
+
+#if 0
+static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
+{
+ pcicore_write32(pc, 0x130, address);
+ pcicore_read32(pc, 0x130);
+ pcicore_write32(pc, 0x134, data);
+}
+#endif
+
+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ u32 v;
+ int i;
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ v |= (0x1F << 18);
+ v |= (phy << 4);
+ pcicore_write32(pc, mdio_data, v);
+
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+}
+
+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u16 ret = 0;
+ u32 v;
+ int i;
+
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
+ if (pc->core->id.rev >= 10) {
+ max_retries = 200;
+ bcma_pcie_mdio_set_phy(pc, device);
+ }
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 29); /* Read Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->core->id.rev < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */) {
+ udelay(10);
+ ret = pcicore_read32(pc, mdio_data);
+ break;
+ }
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
+ return ret;
+}
+
+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+ u8 address, u16 data)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u32 v;
+ int i;
+
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
+ if (pc->core->id.rev >= 10) {
+ max_retries = 200;
+ bcma_pcie_mdio_set_phy(pc, device);
+ }
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->core->id.rev < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
+}
+
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
+{
+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
+{
+ const u8 serdes_pll_device = 0x1D;
+ const u8 serdes_rx_device = 0x1F;
+ u16 tmp;
+
+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+ bcma_pcicore_polarity_workaround(pc));
+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+ if (tmp & 0x4000)
+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+/**************************************************
+ * Init.
+ **************************************************/
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+ bcma_pcicore_serdes_workaround(pc);
+}
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
new file mode 100644
index 0000000..99dd36e
--- /dev/null
+++ b/drivers/bcma/host_pci.c
@@ -0,0 +1,196 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
+
+static void bcma_host_pci_switch_core(struct bcma_device *core)
+{
+ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
+ core->addr);
+ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+ core->wrap);
+ core->bus->mapped_core = core;
+ pr_debug("Switched to core: 0x%X\n", core->id.id);
+}
+
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread8(core->bus->mmio + offset);
+}
+
+static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread16(core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread32(core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
+ u8 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite8(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
+ u16 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite16(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite32(value, core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+const struct bcma_host_ops bcma_host_pci_ops = {
+ .read8 = bcma_host_pci_read8,
+ .read16 = bcma_host_pci_read16,
+ .read32 = bcma_host_pci_read32,
+ .write8 = bcma_host_pci_write8,
+ .write16 = bcma_host_pci_write16,
+ .write32 = bcma_host_pci_write32,
+ .aread32 = bcma_host_pci_aread32,
+ .awrite32 = bcma_host_pci_awrite32,
+};
+
+static int bcma_host_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct bcma_bus *bus;
+ int err = -ENOMEM;
+ const char *name;
+ u32 val;
+
+ /* Alloc */
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ goto out;
+
+ /* Basic PCI configuration */
+ err = pci_enable_device(dev);
+ if (err)
+ goto err_kfree_bus;
+
+ name = dev_name(&dev->dev);
+ if (dev->driver && dev->driver->name)
+ name = dev->driver->name;
+ err = pci_request_regions(dev, name);
+ if (err)
+ goto err_pci_disable;
+ pci_set_master(dev);
+
+ /* Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
+ /* SSB needed additional powering up, do we have any AMBA PCI cards? */
+ if (!pci_is_pcie(dev))
+ pr_err("PCI card detected, report problems.\n");
+
+ /* Map MMIO */
+ err = -ENOMEM;
+ bus->mmio = pci_iomap(dev, 0, ~0UL);
+ if (!bus->mmio)
+ goto err_pci_release_regions;
+
+ /* Host specific */
+ bus->host_pci = dev;
+ bus->hosttype = BCMA_HOSTTYPE_PCI;
+ bus->ops = &bcma_host_pci_ops;
+
+ /* Register */
+ err = bcma_bus_register(bus);
+ if (err)
+ goto err_pci_unmap_mmio;
+
+ pci_set_drvdata(dev, bus);
+
+out:
+ return err;
+
+err_pci_unmap_mmio:
+ pci_iounmap(dev, bus->mmio);
+err_pci_release_regions:
+ pci_release_regions(dev);
+err_pci_disable:
+ pci_disable_device(dev);
+err_kfree_bus:
+ kfree(bus);
+ return err;
+}
+
+static void bcma_host_pci_remove(struct pci_dev *dev)
+{
+ struct bcma_bus *bus = pci_get_drvdata(dev);
+
+ bcma_bus_unregister(bus);
+ pci_iounmap(dev, bus->mmio);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(bus);
+ pci_set_drvdata(dev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
+
+static struct pci_driver bcma_pci_bridge_driver = {
+ .name = "bcma-pci-bridge",
+ .id_table = bcma_pci_bridge_tbl,
+ .probe = bcma_host_pci_probe,
+ .remove = bcma_host_pci_remove,
+};
+
+int __init bcma_host_pci_init(void)
+{
+ return pci_register_driver(&bcma_pci_bridge_driver);
+}
+
+void __exit bcma_host_pci_exit(void)
+{
+ pci_unregister_driver(&bcma_pci_bridge_driver);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
new file mode 100644
index 0000000..be52344
--- /dev/null
+++ b/drivers/bcma/main.c
@@ -0,0 +1,247 @@
+/*
+ * Broadcom specific AMBA
+ * Bus subsystem
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+MODULE_LICENSE("GPL");
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+static int bcma_device_probe(struct device *dev);
+static int bcma_device_remove(struct device *dev);
+
+static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%03X\n", core->id.manuf);
+}
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%03X\n", core->id.id);
+}
+static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%02X\n", core->id.rev);
+}
+static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%X\n", core->id.class);
+}
+static struct device_attribute bcma_device_attrs[] = {
+ __ATTR_RO(manuf),
+ __ATTR_RO(id),
+ __ATTR_RO(rev),
+ __ATTR_RO(class),
+ __ATTR_NULL,
+};
+
+static struct bus_type bcma_bus_type = {
+ .name = "bcma",
+ .match = bcma_bus_match,
+ .probe = bcma_device_probe,
+ .remove = bcma_device_remove,
+ .dev_attrs = bcma_device_attrs,
+};
+
+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ if (core->id.id == coreid)
+ return core;
+ }
+ return NULL;
+}
+
+static void bcma_release_core_dev(struct device *dev)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ kfree(core);
+}
+
+static int bcma_register_cores(struct bcma_bus *bus)
+{
+ struct bcma_device *core;
+ int err, dev_id = 0;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ /* We support that cores ourself */
+ switch (core->id.id) {
+ case BCMA_CORE_CHIPCOMMON:
+ case BCMA_CORE_PCI:
+ case BCMA_CORE_PCIE:
+ continue;
+ }
+
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ core->dev.parent = &bus->host_pci->dev;
+ break;
+ case BCMA_HOSTTYPE_NONE:
+ case BCMA_HOSTTYPE_SDIO:
+ break;
+ }
+
+ err = device_register(&core->dev);
+ if (err) {
+ pr_err("Could not register dev for core 0x%03X\n",
+ core->id.id);
+ continue;
+ }
+ core->dev_registered = true;
+ dev_id++;
+ }
+
+ return 0;
+}
+
+static void bcma_unregister_cores(struct bcma_bus *bus)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ if (core->dev_registered)
+ device_unregister(&core->dev);
+ }
+}
+
+int bcma_bus_register(struct bcma_bus *bus)
+{
+ int err;
+ struct bcma_device *core;
+
+ /* Scan for devices (cores) */
+ err = bcma_bus_scan(bus);
+ if (err) {
+ pr_err("Failed to scan: %d\n", err);
+ return -1;
+ }
+
+ /* Init CC core */
+ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
+
+ /* Init PCIE core */
+ core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ if (core) {
+ bus->drv_pci.core = core;
+ bcma_core_pci_init(&bus->drv_pci);
+ }
+
+ /* Register found cores */
+ bcma_register_cores(bus);
+
+ pr_info("Bus registered\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_bus_register);
+
+void bcma_bus_unregister(struct bcma_bus *bus)
+{
+ bcma_unregister_cores(bus);
+}
+EXPORT_SYMBOL_GPL(bcma_bus_unregister);
+
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+{
+ drv->drv.name = drv->name;
+ drv->drv.bus = &bcma_bus_type;
+ drv->drv.owner = owner;
+
+ return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(__bcma_driver_register);
+
+void bcma_driver_unregister(struct bcma_driver *drv)
+{
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(bcma_driver_unregister);
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+ const struct bcma_device_id *cid = &core->id;
+ const struct bcma_device_id *did;
+
+ for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
+ if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
+ (did->id == cid->id || did->id == BCMA_ANY_ID) &&
+ (did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
+ (did->class == cid->class || did->class == BCMA_ANY_CLASS))
+ return 1;
+ }
+ return 0;
+}
+
+static int bcma_device_probe(struct device *dev)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+ drv);
+ int err = 0;
+
+ if (adrv->probe)
+ err = adrv->probe(core);
+
+ return err;
+}
+
+static int bcma_device_remove(struct device *dev)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+ drv);
+
+ if (adrv->remove)
+ adrv->remove(core);
+
+ return 0;
+}
+
+static int __init bcma_modinit(void)
+{
+ int err;
+
+ err = bus_register(&bcma_bus_type);
+ if (err)
+ return err;
+
+#ifdef CONFIG_BCMA_HOST_PCI
+ err = bcma_host_pci_init();
+ if (err) {
+ pr_err("PCI host initialization failed\n");
+ err = 0;
+ }
+#endif
+
+ return err;
+}
+fs_initcall(bcma_modinit);
+
+static void __exit bcma_modexit(void)
+{
+#ifdef CONFIG_BCMA_HOST_PCI
+ bcma_host_pci_exit();
+#endif
+ bus_unregister(&bcma_bus_type);
+}
+module_exit(bcma_modexit)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
new file mode 100644
index 0000000..40d7dcc
--- /dev/null
+++ b/drivers/bcma/scan.c
@@ -0,0 +1,360 @@
+/*
+ * Broadcom specific AMBA
+ * Bus scanning
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "scan.h"
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct bcma_device_id_name {
+ u16 id;
+ const char *name;
+};
+struct bcma_device_id_name bcma_device_names[] = {
+ { BCMA_CORE_OOB_ROUTER, "OOB Router" },
+ { BCMA_CORE_INVALID, "Invalid" },
+ { BCMA_CORE_CHIPCOMMON, "ChipCommon" },
+ { BCMA_CORE_ILINE20, "ILine 20" },
+ { BCMA_CORE_SRAM, "SRAM" },
+ { BCMA_CORE_SDRAM, "SDRAM" },
+ { BCMA_CORE_PCI, "PCI" },
+ { BCMA_CORE_MIPS, "MIPS" },
+ { BCMA_CORE_ETHERNET, "Fast Ethernet" },
+ { BCMA_CORE_V90, "V90" },
+ { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
+ { BCMA_CORE_ADSL, "ADSL" },
+ { BCMA_CORE_ILINE100, "ILine 100" },
+ { BCMA_CORE_IPSEC, "IPSEC" },
+ { BCMA_CORE_UTOPIA, "UTOPIA" },
+ { BCMA_CORE_PCMCIA, "PCMCIA" },
+ { BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
+ { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
+ { BCMA_CORE_OFDM, "OFDM" },
+ { BCMA_CORE_EXTIF, "EXTIF" },
+ { BCMA_CORE_80211, "IEEE 802.11" },
+ { BCMA_CORE_PHY_A, "PHY A" },
+ { BCMA_CORE_PHY_B, "PHY B" },
+ { BCMA_CORE_PHY_G, "PHY G" },
+ { BCMA_CORE_MIPS_3302, "MIPS 3302" },
+ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
+ { BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
+ { BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
+ { BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
+ { BCMA_CORE_SDIO_HOST, "SDIO Host" },
+ { BCMA_CORE_ROBOSWITCH, "Roboswitch" },
+ { BCMA_CORE_PARA_ATA, "PATA" },
+ { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
+ { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
+ { BCMA_CORE_PCIE, "PCIe" },
+ { BCMA_CORE_PHY_N, "PHY N" },
+ { BCMA_CORE_SRAM_CTL, "SRAM Controller" },
+ { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
+ { BCMA_CORE_ARM_1176, "ARM 1176" },
+ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+ { BCMA_CORE_PHY_LP, "PHY LP" },
+ { BCMA_CORE_PMU, "PMU" },
+ { BCMA_CORE_PHY_SSN, "PHY SSN" },
+ { BCMA_CORE_SDIO_DEV, "SDIO Device" },
+ { BCMA_CORE_ARM_CM3, "ARM CM3" },
+ { BCMA_CORE_PHY_HT, "PHY HT" },
+ { BCMA_CORE_MIPS_74K, "MIPS 74K" },
+ { BCMA_CORE_MAC_GBIT, "GBit MAC" },
+ { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
+ { BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
+ { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
+ { BCMA_CORE_SHARED_COMMON, "Common Shared" },
+ { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
+ { BCMA_CORE_SPI_HOST, "SPI Host" },
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
+ { BCMA_CORE_DEFAULT, "Default" },
+};
+const char *bcma_device_name(struct bcma_device_id *id)
+{
+ int i;
+
+ if (id->manuf == BCMA_MANUF_BCM) {
+ for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
+ if (bcma_device_names[i].id == id->id)
+ return bcma_device_names[i].name;
+ }
+ }
+ return "UNKNOWN";
+}
+
+static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
+ u16 offset)
+{
+ return readl(bus->mmio + offset);
+}
+
+static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
+{
+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+ pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
+ addr);
+}
+
+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+}
+
+static void bcma_erom_push_ent(u32 **eromptr)
+{
+ (*eromptr)--;
+}
+
+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+ return -ENOENT;
+ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
+ return -ENOENT;
+ return ent;
+}
+
+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+}
+
+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (((ent & SCAN_ER_VALID)) &&
+ ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+}
+
+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent;
+ while (1) {
+ ent = bcma_erom_get_ent(bus, eromptr);
+ if ((ent & SCAN_ER_VALID) &&
+ ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
+ break;
+ if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
+ break;
+ }
+ bcma_erom_push_ent(eromptr);
+}
+
+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+ return -ENOENT;
+ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
+ return -ENOENT;
+ return ent;
+}
+
+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
+ u32 type, u8 port)
+{
+ u32 addrl, addrh, sizel, sizeh = 0;
+ u32 size;
+
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if ((!(ent & SCAN_ER_VALID)) ||
+ ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
+ ((ent & SCAN_ADDR_TYPE) != type) ||
+ (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+ bcma_erom_push_ent(eromptr);
+ return -EINVAL;
+ }
+
+ addrl = ent & SCAN_ADDR_ADDR;
+ if (ent & SCAN_ADDR_AG32)
+ addrh = bcma_erom_get_ent(bus, eromptr);
+ else
+ addrh = 0;
+
+ if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
+ size = bcma_erom_get_ent(bus, eromptr);
+ sizel = size & SCAN_SIZE_SZ;
+ if (size & SCAN_SIZE_SG32)
+ sizeh = bcma_erom_get_ent(bus, eromptr);
+ } else
+ sizel = SCAN_ADDR_SZ_BASE <<
+ ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
+
+ return addrl;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+ s32 cia, cib;
+ u8 ports[2], wrappers[2];
+
+ s32 tmp;
+ u8 i, j;
+
+ int err;
+
+ INIT_LIST_HEAD(&bus->cores);
+ bus->nr_cores = 0;
+
+ bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
+
+ tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+ eromptr = bus->mmio;
+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+ bcma_scan_switch_core(bus, erombase);
+
+ while (eromptr < eromend) {
+ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+ /* get CIs */
+ cia = bcma_erom_get_ci(bus, &eromptr);
+ if (cia < 0) {
+ bcma_erom_push_ent(&eromptr);
+ if (bcma_erom_is_end(bus, &eromptr))
+ break;
+ err= -EILSEQ;
+ goto out;
+ }
+ cib = bcma_erom_get_ci(bus, &eromptr);
+ if (cib < 0) {
+ err= -EILSEQ;
+ goto out;
+ }
+
+ /* parse CIs */
+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+ if (((core->id.manuf == BCMA_MANUF_ARM) &&
+ (core->id.id == 0xFFF)) ||
+ (ports[1] == 0)) {
+ bcma_erom_skip_component(bus, &eromptr);
+ continue;
+ }
+
+ /* check if component is a core at all */
+ if (wrappers[0] + wrappers[1] == 0) {
+ /* we could save addrl of the router
+ if (cid == BCMA_CORE_OOB_ROUTER)
+ */
+ bcma_erom_skip_component(bus, &eromptr);
+ continue;
+ }
+
+ if (bcma_erom_is_bridge(bus, &eromptr)) {
+ bcma_erom_skip_component(bus, &eromptr);
+ continue;
+ }
+
+ /* get & parse master ports */
+ for (i = 0; i < ports[0]; i++) {
+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+ if (mst_port_d < 0) {
+ err= -EILSEQ;
+ goto out;
+ }
+ }
+
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+ SCAN_ADDR_TYPE_SLAVE, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: slave port %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->addr = tmp;
+ }
+ }
+ }
+
+ /* get & parse master wrappers */
+ for (i = 0; i < wrappers[0]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+ SCAN_ADDR_TYPE_MWRAP, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->wrap = tmp;
+ }
+ }
+ }
+
+ /* get & parse slave wrappers */
+ for (i = 0; i < wrappers[1]; i++) {
+ u8 hack = (ports[1] == 1) ? 0 : 1;
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+ SCAN_ADDR_TYPE_SWRAP, i + hack);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (wrappers[0] == 0 && !i && !j)
+ core->wrap = tmp;
+ }
+ }
+ }
+
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ bus->nr_cores, bcma_device_name(&core->id),
+ core->id.manuf, core->id.id, core->id.rev,
+ core->id.class);
+
+ core->core_index = bus->nr_cores++;
+ list_add(&core->list, &bus->cores);
+ continue;
+out:
+ return err;
+ }
+
+ return 0;
+}
diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h
new file mode 100644
index 0000000..113e6a6
--- /dev/null
+++ b/drivers/bcma/scan.h
@@ -0,0 +1,56 @@
+#ifndef BCMA_SCAN_H_
+#define BCMA_SCAN_H_
+
+#define BCMA_ADDR_BASE 0x18000000
+#define BCMA_WRAP_BASE 0x18100000
+
+#define SCAN_ER_VALID 0x00000001
+#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
+#define SCAN_ER_TAG 0x0000000E
+#define SCAN_ER_TAG_CI 0x00000000
+#define SCAN_ER_TAG_MP 0x00000002
+#define SCAN_ER_TAG_ADDR 0x00000004
+#define SCAN_ER_TAG_END 0x0000000E
+#define SCAN_ER_BAD 0xFFFFFFFF
+
+#define SCAN_CIA_CLASS 0x000000F0
+#define SCAN_CIA_CLASS_SHIFT 4
+#define SCAN_CIA_ID 0x000FFF00
+#define SCAN_CIA_ID_SHIFT 8
+#define SCAN_CIA_MANUF 0xFFF00000
+#define SCAN_CIA_MANUF_SHIFT 20
+
+#define SCAN_CIB_NMP 0x000001F0
+#define SCAN_CIB_NMP_SHIFT 4
+#define SCAN_CIB_NSP 0x00003E00
+#define SCAN_CIB_NSP_SHIFT 9
+#define SCAN_CIB_NMW 0x0007C000
+#define SCAN_CIB_NMW_SHIFT 14
+#define SCAN_CIB_NSW 0x00F80000
+#define SCAN_CIB_NSW_SHIFT 17
+#define SCAN_CIB_REV 0xFF000000
+#define SCAN_CIB_REV_SHIFT 24
+
+#define SCAN_ADDR_AG32 0x00000008
+#define SCAN_ADDR_SZ 0x00000030
+#define SCAN_ADDR_SZ_SHIFT 4
+#define SCAN_ADDR_SZ_4K 0x00000000
+#define SCAN_ADDR_SZ_8K 0x00000010
+#define SCAN_ADDR_SZ_16K 0x00000020
+#define SCAN_ADDR_SZ_SZD 0x00000030
+#define SCAN_ADDR_TYPE 0x000000C0
+#define SCAN_ADDR_TYPE_SLAVE 0x00000000
+#define SCAN_ADDR_TYPE_BRIDGE 0x00000040
+#define SCAN_ADDR_TYPE_SWRAP 0x00000080
+#define SCAN_ADDR_TYPE_MWRAP 0x000000C0
+#define SCAN_ADDR_PORT 0x00000F00
+#define SCAN_ADDR_PORT_SHIFT 8
+#define SCAN_ADDR_ADDR 0xFFFFF000
+
+#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */
+
+#define SCAN_SIZE_SZ_ALIGN 0x00000FFF
+#define SCAN_SIZE_SZ 0xFFFFF000
+#define SCAN_SIZE_SG32 0x00000008
+
+#endif /* BCMA_SCAN_H_ */
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 8066d08..e086fbb 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -2547,7 +2547,6 @@
disk->major = MajorNumber;
disk->first_minor = n << DAC960_MaxPartitionsBits;
disk->fops = &DAC960_BlockDeviceOperations;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
}
/*
Indicate the Block Device Registration completed successfully,
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 456c0cc..8eba86b 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1736,7 +1736,6 @@
disk->major = FLOPPY_MAJOR;
disk->first_minor = drive;
disk->fops = &floppy_fops;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
sprintf(disk->disk_name, "fd%d", drive);
disk->private_data = &unit[drive];
set_capacity(disk, 880*2);
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index c871eae..ede16c6 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1964,7 +1964,6 @@
unit[i].disk->first_minor = i;
sprintf(unit[i].disk->disk_name, "fd%d", i);
unit[i].disk->fops = &floppy_fops;
- unit[i].disk->events = DISK_EVENT_MEDIA_CHANGE;
unit[i].disk->private_data = &unit[i];
unit[i].disk->queue = blk_init_queue(do_fd_request,
&ataflop_lock);
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 301d7a9..db8f885 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4205,7 +4205,6 @@
disks[dr]->major = FLOPPY_MAJOR;
disks[dr]->first_minor = TOMINOR(dr);
disks[dr]->fops = &floppy_fops;
- disks[dr]->events = DISK_EVENT_MEDIA_CHANGE;
sprintf(disks[dr]->disk_name, "fd%d", dr);
init_timer(&motor_off_timer[dr]);
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 2f2ccf6..8690e31 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -320,7 +320,6 @@
disk->first_minor = unit;
strcpy(disk->disk_name, cd->name); /* umm... */
disk->fops = &pcd_bdops;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
}
}
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 21dfdb77..869e767 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -837,7 +837,6 @@
p->fops = &pd_fops;
p->major = major;
p->first_minor = (disk - pd) << PD_BITS;
- p->events = DISK_EVENT_MEDIA_CHANGE;
disk->gd = p;
p->private_data = disk;
p->queue = pd_queue;
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 7adeb1e..f21b520 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -294,7 +294,6 @@
disk->first_minor = unit;
strcpy(disk->disk_name, pf->name);
disk->fops = &pf_fops;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
if (!(*drives[unit])[D_PRT])
pf_drive_count++;
}
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 16dc364..9712fad 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -92,6 +92,8 @@
struct list_head node;
};
+struct rbd_req_coll;
+
/*
* a single io request
*/
@@ -100,6 +102,24 @@
struct bio *bio; /* cloned bio */
struct page **pages; /* list of used pages */
u64 len;
+ int coll_index;
+ struct rbd_req_coll *coll;
+};
+
+struct rbd_req_status {
+ int done;
+ int rc;
+ u64 bytes;
+};
+
+/*
+ * a collection of requests
+ */
+struct rbd_req_coll {
+ int total;
+ int num_done;
+ struct kref kref;
+ struct rbd_req_status status[0];
};
struct rbd_snap {
@@ -416,6 +436,17 @@
rbd_dev->client = NULL;
}
+/*
+ * Destroy requests collection
+ */
+static void rbd_coll_release(struct kref *kref)
+{
+ struct rbd_req_coll *coll =
+ container_of(kref, struct rbd_req_coll, kref);
+
+ dout("rbd_coll_release %p\n", coll);
+ kfree(coll);
+}
/*
* Create a new header structure, translate header format from the on-disk
@@ -590,6 +621,14 @@
return len;
}
+static int rbd_get_num_segments(struct rbd_image_header *header,
+ u64 ofs, u64 len)
+{
+ u64 start_seg = ofs >> header->obj_order;
+ u64 end_seg = (ofs + len - 1) >> header->obj_order;
+ return end_seg - start_seg + 1;
+}
+
/*
* bio helpers
*/
@@ -735,6 +774,50 @@
kfree(ops);
}
+static void rbd_coll_end_req_index(struct request *rq,
+ struct rbd_req_coll *coll,
+ int index,
+ int ret, u64 len)
+{
+ struct request_queue *q;
+ int min, max, i;
+
+ dout("rbd_coll_end_req_index %p index %d ret %d len %lld\n",
+ coll, index, ret, len);
+
+ if (!rq)
+ return;
+
+ if (!coll) {
+ blk_end_request(rq, ret, len);
+ return;
+ }
+
+ q = rq->q;
+
+ spin_lock_irq(q->queue_lock);
+ coll->status[index].done = 1;
+ coll->status[index].rc = ret;
+ coll->status[index].bytes = len;
+ max = min = coll->num_done;
+ while (max < coll->total && coll->status[max].done)
+ max++;
+
+ for (i = min; i<max; i++) {
+ __blk_end_request(rq, coll->status[i].rc,
+ coll->status[i].bytes);
+ coll->num_done++;
+ kref_put(&coll->kref, rbd_coll_release);
+ }
+ spin_unlock_irq(q->queue_lock);
+}
+
+static void rbd_coll_end_req(struct rbd_request *req,
+ int ret, u64 len)
+{
+ rbd_coll_end_req_index(req->rq, req->coll, req->coll_index, ret, len);
+}
+
/*
* Send ceph osd request
*/
@@ -749,6 +832,8 @@
int flags,
struct ceph_osd_req_op *ops,
int num_reply,
+ struct rbd_req_coll *coll,
+ int coll_index,
void (*rbd_cb)(struct ceph_osd_request *req,
struct ceph_msg *msg),
struct ceph_osd_request **linger_req,
@@ -763,12 +848,20 @@
struct ceph_osd_request_head *reqhead;
struct rbd_image_header *header = &dev->header;
- ret = -ENOMEM;
req_data = kzalloc(sizeof(*req_data), GFP_NOIO);
- if (!req_data)
- goto done;
+ if (!req_data) {
+ if (coll)
+ rbd_coll_end_req_index(rq, coll, coll_index,
+ -ENOMEM, len);
+ return -ENOMEM;
+ }
- dout("rbd_do_request len=%lld ofs=%lld\n", len, ofs);
+ if (coll) {
+ req_data->coll = coll;
+ req_data->coll_index = coll_index;
+ }
+
+ dout("rbd_do_request obj=%s ofs=%lld len=%lld\n", obj, len, ofs);
down_read(&header->snap_rwsem);
@@ -777,9 +870,9 @@
ops,
false,
GFP_NOIO, pages, bio);
- if (IS_ERR(req)) {
+ if (!req) {
up_read(&header->snap_rwsem);
- ret = PTR_ERR(req);
+ ret = -ENOMEM;
goto done_pages;
}
@@ -828,7 +921,8 @@
ret = ceph_osdc_wait_request(&dev->client->osdc, req);
if (ver)
*ver = le64_to_cpu(req->r_reassert_version.version);
- dout("reassert_ver=%lld\n", le64_to_cpu(req->r_reassert_version.version));
+ dout("reassert_ver=%lld\n",
+ le64_to_cpu(req->r_reassert_version.version));
ceph_osdc_put_request(req);
}
return ret;
@@ -837,10 +931,8 @@
bio_chain_put(req_data->bio);
ceph_osdc_put_request(req);
done_pages:
+ rbd_coll_end_req(req_data, ret, len);
kfree(req_data);
-done:
- if (rq)
- blk_end_request(rq, ret, len);
return ret;
}
@@ -874,7 +966,7 @@
bytes = req_data->len;
}
- blk_end_request(req_data->rq, rc, bytes);
+ rbd_coll_end_req(req_data, rc, bytes);
if (req_data->bio)
bio_chain_put(req_data->bio);
@@ -934,6 +1026,7 @@
flags,
ops,
2,
+ NULL, 0,
NULL,
linger_req, ver);
if (ret < 0)
@@ -959,7 +1052,9 @@
u64 snapid,
int opcode, int flags, int num_reply,
u64 ofs, u64 len,
- struct bio *bio)
+ struct bio *bio,
+ struct rbd_req_coll *coll,
+ int coll_index)
{
char *seg_name;
u64 seg_ofs;
@@ -995,7 +1090,10 @@
flags,
ops,
num_reply,
+ coll, coll_index,
rbd_req_cb, 0, NULL);
+
+ rbd_destroy_ops(ops);
done:
kfree(seg_name);
return ret;
@@ -1008,13 +1106,15 @@
struct rbd_device *rbd_dev,
struct ceph_snap_context *snapc,
u64 ofs, u64 len,
- struct bio *bio)
+ struct bio *bio,
+ struct rbd_req_coll *coll,
+ int coll_index)
{
return rbd_do_op(rq, rbd_dev, snapc, CEPH_NOSNAP,
CEPH_OSD_OP_WRITE,
CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
2,
- ofs, len, bio);
+ ofs, len, bio, coll, coll_index);
}
/*
@@ -1024,14 +1124,16 @@
struct rbd_device *rbd_dev,
u64 snapid,
u64 ofs, u64 len,
- struct bio *bio)
+ struct bio *bio,
+ struct rbd_req_coll *coll,
+ int coll_index)
{
return rbd_do_op(rq, rbd_dev, NULL,
(snapid ? snapid : CEPH_NOSNAP),
CEPH_OSD_OP_READ,
CEPH_OSD_FLAG_READ,
2,
- ofs, len, bio);
+ ofs, len, bio, coll, coll_index);
}
/*
@@ -1063,7 +1165,9 @@
{
struct ceph_osd_req_op *ops;
struct page **pages = NULL;
- int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_NOTIFY_ACK, 0);
+ int ret;
+
+ ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_NOTIFY_ACK, 0);
if (ret < 0)
return ret;
@@ -1077,6 +1181,7 @@
CEPH_OSD_FLAG_READ,
ops,
1,
+ NULL, 0,
rbd_simple_req_cb, 0, NULL);
rbd_destroy_ops(ops);
@@ -1274,6 +1379,20 @@
return ret;
}
+static struct rbd_req_coll *rbd_alloc_coll(int num_reqs)
+{
+ struct rbd_req_coll *coll =
+ kzalloc(sizeof(struct rbd_req_coll) +
+ sizeof(struct rbd_req_status) * num_reqs,
+ GFP_ATOMIC);
+
+ if (!coll)
+ return NULL;
+ coll->total = num_reqs;
+ kref_init(&coll->kref);
+ return coll;
+}
+
/*
* block device queue callback
*/
@@ -1291,6 +1410,8 @@
bool do_write;
int size, op_size = 0;
u64 ofs;
+ int num_segs, cur_seg = 0;
+ struct rbd_req_coll *coll;
/* peek at request from block layer */
if (!rq)
@@ -1321,6 +1442,14 @@
do_write ? "write" : "read",
size, blk_rq_pos(rq) * 512ULL);
+ num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size);
+ coll = rbd_alloc_coll(num_segs);
+ if (!coll) {
+ spin_lock_irq(q->queue_lock);
+ __blk_end_request_all(rq, -ENOMEM);
+ goto next;
+ }
+
do {
/* a bio clone to be passed down to OSD req */
dout("rq->bio->bi_vcnt=%d\n", rq->bio->bi_vcnt);
@@ -1328,35 +1457,41 @@
rbd_dev->header.block_name,
ofs, size,
NULL, NULL);
+ kref_get(&coll->kref);
bio = bio_chain_clone(&rq_bio, &next_bio, &bp,
op_size, GFP_ATOMIC);
if (!bio) {
- spin_lock_irq(q->queue_lock);
- __blk_end_request_all(rq, -ENOMEM);
- goto next;
+ rbd_coll_end_req_index(rq, coll, cur_seg,
+ -ENOMEM, op_size);
+ goto next_seg;
}
+
/* init OSD command: write or read */
if (do_write)
rbd_req_write(rq, rbd_dev,
rbd_dev->header.snapc,
ofs,
- op_size, bio);
+ op_size, bio,
+ coll, cur_seg);
else
rbd_req_read(rq, rbd_dev,
cur_snap_id(rbd_dev),
ofs,
- op_size, bio);
+ op_size, bio,
+ coll, cur_seg);
+next_seg:
size -= op_size;
ofs += op_size;
+ cur_seg++;
rq_bio = next_bio;
} while (size > 0);
+ kref_put(&coll->kref, rbd_coll_release);
if (bp)
bio_pair_release(bp);
-
spin_lock_irq(q->queue_lock);
next:
rq = blk_fetch_request(q);
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index 24a482f..fd5adcd 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -858,7 +858,6 @@
swd->unit[drive].disk->first_minor = drive;
sprintf(swd->unit[drive].disk->disk_name, "fd%d", drive);
swd->unit[drive].disk->fops = &floppy_fops;
- swd->unit[drive].disk->events = DISK_EVENT_MEDIA_CHANGE;
swd->unit[drive].disk->private_data = &swd->unit[drive];
swd->unit[drive].disk->queue = swd->queue;
set_capacity(swd->unit[drive].disk, 2880);
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 4c10f56..773bfa7 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1163,7 +1163,6 @@
disk->major = FLOPPY_MAJOR;
disk->first_minor = i;
disk->fops = &floppy_fops;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
disk->private_data = &floppy_states[i];
disk->queue = swim3_queue;
disk->flags |= GENHD_FL_REMOVABLE;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 68b9430..0e376d4 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -2334,7 +2334,6 @@
disk->major = UB_MAJOR;
disk->first_minor = lun->id * UB_PARTS_PER_LUN;
disk->fops = &ub_bd_fops;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
disk->private_data = lun;
disk->driverfs_dev = &sc->intf->dev;
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 645ff76..6c7fd7d 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1005,7 +1005,6 @@
ace->gd->major = ace_major;
ace->gd->first_minor = ace->id * ACE_NUM_MINORS;
ace->gd->fops = &ace_fops;
- ace->gd->events = DISK_EVENT_MEDIA_CHANGE;
ace->gd->queue = ace->queue;
ace->gd->private_data = ace;
snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 8e0de9a..11b41fd 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -188,7 +188,7 @@
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688.
+ Marvell Bluetooth devices, such as 8688/8787.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -201,7 +201,7 @@
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently only SD8688 chipset is
+ devices with SDIO interface. Currently SD8688/SD8787 chipsets are
supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 5577ed6..6bacef3 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -62,6 +62,7 @@
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x13d3, 0x3304) },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
@@ -138,9 +139,6 @@
count -= size;
}
- kfree(send_buf);
- return 0;
-
error:
kfree(send_buf);
return err;
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index dcc2a6e..7f521d4 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -49,15 +49,59 @@
static u8 user_rmmod;
static u8 sdio_ireg;
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
+ .cfg = 0x03,
+ .host_int_mask = 0x04,
+ .host_intstatus = 0x05,
+ .card_status = 0x20,
+ .sq_read_base_addr_a0 = 0x10,
+ .sq_read_base_addr_a1 = 0x11,
+ .card_fw_status0 = 0x40,
+ .card_fw_status1 = 0x41,
+ .card_rx_len = 0x42,
+ .card_rx_unit = 0x43,
+ .io_port_0 = 0x00,
+ .io_port_1 = 0x01,
+ .io_port_2 = 0x02,
+};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
+ .cfg = 0x00,
+ .host_int_mask = 0x02,
+ .host_intstatus = 0x03,
+ .card_status = 0x30,
+ .sq_read_base_addr_a0 = 0x40,
+ .sq_read_base_addr_a1 = 0x41,
+ .card_revision = 0x5c,
+ .card_fw_status0 = 0x60,
+ .card_fw_status1 = 0x61,
+ .card_rx_len = 0x62,
+ .card_rx_unit = 0x63,
+ .io_port_0 = 0x78,
+ .io_port_1 = 0x79,
+ .io_port_2 = 0x7a,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
.helper = "sd8688_helper.bin",
.firmware = "sd8688.bin",
+ .reg = &btmrvl_reg_8688,
+ .sd_blksz_fw_dl = 64,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8787_uapsta.bin",
+ .reg = &btmrvl_reg_8787,
+ .sd_blksz_fw_dl = 256,
};
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
.driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+ /* Marvell SD8787 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
{ } /* Terminating entry */
};
@@ -69,7 +113,7 @@
u8 reg;
int ret;
- reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
+ reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
if (!ret)
card->rx_unit = reg;
@@ -83,11 +127,11 @@
*dat = 0;
- fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
+ fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret)
return -EIO;
- fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
+ fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
if (ret)
return -EIO;
@@ -101,7 +145,7 @@
u8 reg;
int ret;
- reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
+ reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
if (!ret)
*dat = (u16) reg << card->rx_unit;
@@ -113,7 +157,7 @@
{
int ret;
- sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
+ sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
if (ret) {
BT_ERR("Unable to enable the host interrupt!");
ret = -EIO;
@@ -128,13 +172,13 @@
u8 host_int_mask;
int ret;
- host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
+ host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
if (ret)
return -EIO;
host_int_mask &= ~mask;
- sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
+ sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
if (ret < 0) {
BT_ERR("Unable to disable the host interrupt!");
return -EIO;
@@ -150,7 +194,7 @@
int ret;
for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
- status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
+ status = sdio_readb(card->func, card->reg->card_status, &ret);
if (ret)
goto failed;
if ((status & bits) == bits)
@@ -299,7 +343,7 @@
u8 base0, base1;
void *tmpfwbuf = NULL;
u8 *fwbuf;
- u16 len;
+ u16 len, blksz_dl = card->sd_blksz_fw_dl;
int txlen = 0, tx_blocks = 0, count = 0;
ret = request_firmware(&fw_firmware, card->firmware,
@@ -345,7 +389,7 @@
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
base0 = sdio_readb(card->func,
- SQ_READ_BASE_ADDRESS_A0_REG, &ret);
+ card->reg->sq_read_base_addr_a0, &ret);
if (ret) {
BT_ERR("BASE0 register read failed:"
" base0 = 0x%04X(%d)."
@@ -355,7 +399,7 @@
goto done;
}
base1 = sdio_readb(card->func,
- SQ_READ_BASE_ADDRESS_A1_REG, &ret);
+ card->reg->sq_read_base_addr_a1, &ret);
if (ret) {
BT_ERR("BASE1 register read failed:"
" base1 = 0x%04X(%d)."
@@ -403,20 +447,19 @@
if (firmwarelen - offset < txlen)
txlen = firmwarelen - offset;
- tx_blocks =
- (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
+ tx_blocks = (txlen + blksz_dl - 1) / blksz_dl;
memcpy(fwbuf, &firmware[offset], txlen);
}
ret = sdio_writesb(card->func, card->ioport, fwbuf,
- tx_blocks * SDIO_BLOCK_SIZE);
+ tx_blocks * blksz_dl);
if (ret < 0) {
BT_ERR("FW download, writesb(%d) failed @%d",
count, offset);
- sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
- &ret);
+ sdio_writeb(card->func, HOST_CMD53_FIN,
+ card->reg->cfg, &ret);
if (ret)
BT_ERR("writeb failed (CFG)");
}
@@ -597,7 +640,7 @@
priv = card->priv;
- ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
+ ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_readb: read int status register failed");
return;
@@ -613,7 +656,7 @@
sdio_writeb(card->func, ~(ireg) & (DN_LD_HOST_INT_STATUS |
UP_LD_HOST_INT_STATUS),
- HOST_INTSTATUS_REG, &ret);
+ card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_writeb: clear int status register failed");
return;
@@ -664,7 +707,7 @@
goto release_irq;
}
- reg = sdio_readb(func, IO_PORT_0_REG, &ret);
+ reg = sdio_readb(func, card->reg->io_port_0, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
@@ -672,7 +715,7 @@
card->ioport = reg;
- reg = sdio_readb(func, IO_PORT_1_REG, &ret);
+ reg = sdio_readb(func, card->reg->io_port_1, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
@@ -680,7 +723,7 @@
card->ioport |= (reg << 8);
- reg = sdio_readb(func, IO_PORT_2_REG, &ret);
+ reg = sdio_readb(func, card->reg->io_port_2, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
@@ -815,6 +858,8 @@
static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
{
int ret = 0;
+ u8 fws0;
+ int pollnum = MAX_POLL_TRIES;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
@@ -827,20 +872,36 @@
goto done;
}
- ret = btmrvl_sdio_download_helper(card);
+ /* Check if other function driver is downloading the firmware */
+ fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret) {
- BT_ERR("Failed to download helper!");
+ BT_ERR("Failed to read FW downloading status!");
ret = -EIO;
goto done;
}
+ if (fws0) {
+ BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
- if (btmrvl_sdio_download_fw_w_helper(card)) {
- BT_ERR("Failed to download firmware!");
- ret = -EIO;
- goto done;
+ /* Give other function more time to download the firmware */
+ pollnum *= 10;
+ } else {
+ if (card->helper) {
+ ret = btmrvl_sdio_download_helper(card);
+ if (ret) {
+ BT_ERR("Failed to download helper!");
+ ret = -EIO;
+ goto done;
+ }
+ }
+
+ if (btmrvl_sdio_download_fw_w_helper(card)) {
+ BT_ERR("Failed to download firmware!");
+ ret = -EIO;
+ goto done;
+ }
}
- if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
+ if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
BT_ERR("FW failed to be active in time!");
ret = -ETIMEDOUT;
goto done;
@@ -864,7 +925,7 @@
sdio_claim_host(card->func);
- sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
+ sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
sdio_release_host(card->func);
@@ -893,8 +954,10 @@
if (id->driver_data) {
struct btmrvl_sdio_device *data = (void *) id->driver_data;
- card->helper = data->helper;
+ card->helper = data->helper;
card->firmware = data->firmware;
+ card->reg = data->reg;
+ card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
}
if (btmrvl_sdio_register_dev(card) < 0) {
@@ -1011,3 +1074,4 @@
MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 27329f1..43d35a6 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -47,44 +47,46 @@
/* Max retry number of CMD53 write */
#define MAX_WRITE_IOMEM_RETRY 2
-/* Host Control Registers */
-#define IO_PORT_0_REG 0x00
-#define IO_PORT_1_REG 0x01
-#define IO_PORT_2_REG 0x02
+/* register bitmasks */
+#define HOST_POWER_UP BIT(1)
+#define HOST_CMD53_FIN BIT(2)
-#define CONFIG_REG 0x03
-#define HOST_POWER_UP BIT(1)
-#define HOST_CMD53_FIN BIT(2)
+#define HIM_DISABLE 0xff
+#define HIM_ENABLE (BIT(0) | BIT(1))
-#define HOST_INT_MASK_REG 0x04
-#define HIM_DISABLE 0xff
-#define HIM_ENABLE (BIT(0) | BIT(1))
+#define UP_LD_HOST_INT_STATUS BIT(0)
+#define DN_LD_HOST_INT_STATUS BIT(1)
-#define HOST_INTSTATUS_REG 0x05
-#define UP_LD_HOST_INT_STATUS BIT(0)
-#define DN_LD_HOST_INT_STATUS BIT(1)
+#define DN_LD_CARD_RDY BIT(0)
+#define CARD_IO_READY BIT(3)
-/* Card Control Registers */
-#define SQ_READ_BASE_ADDRESS_A0_REG 0x10
-#define SQ_READ_BASE_ADDRESS_A1_REG 0x11
+#define FIRMWARE_READY 0xfedc
-#define CARD_STATUS_REG 0x20
-#define DN_LD_CARD_RDY BIT(0)
-#define CARD_IO_READY BIT(3)
-#define CARD_FW_STATUS0_REG 0x40
-#define CARD_FW_STATUS1_REG 0x41
-#define FIRMWARE_READY 0xfedc
-
-#define CARD_RX_LEN_REG 0x42
-#define CARD_RX_UNIT_REG 0x43
-
+struct btmrvl_sdio_card_reg {
+ u8 cfg;
+ u8 host_int_mask;
+ u8 host_intstatus;
+ u8 card_status;
+ u8 sq_read_base_addr_a0;
+ u8 sq_read_base_addr_a1;
+ u8 card_revision;
+ u8 card_fw_status0;
+ u8 card_fw_status1;
+ u8 card_rx_len;
+ u8 card_rx_unit;
+ u8 io_port_0;
+ u8 io_port_1;
+ u8 io_port_2;
+};
struct btmrvl_sdio_card {
struct sdio_func *func;
u32 ioport;
const char *helper;
const char *firmware;
+ const struct btmrvl_sdio_card_reg *reg;
+ u16 sd_blksz_fw_dl;
u8 rx_unit;
struct btmrvl_private *priv;
};
@@ -92,6 +94,8 @@
struct btmrvl_sdio_device {
const char *helper;
const char *firmware;
+ const struct btmrvl_sdio_card_reg *reg;
+ u16 sd_blksz_fw_dl;
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 762a510..c2de895 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -104,6 +104,7 @@
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index bd34406..4093935 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -201,8 +201,13 @@
/* Recv data */
static int ath_recv(struct hci_uart *hu, void *data, int count)
{
- if (hci_recv_stream_fragment(hu->hdev, data, count) < 0)
+ int ret;
+
+ ret = hci_recv_stream_fragment(hu->hdev, data, count);
+ if (ret < 0) {
BT_ERR("Frame Reassembly Failed");
+ return ret;
+ }
return count;
}
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index 7b8ad93..2fcd8b3 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -151,8 +151,13 @@
/* Recv data */
static int h4_recv(struct hci_uart *hu, void *data, int count)
{
- if (hci_recv_stream_fragment(hu->hdev, data, count) < 0)
+ int ret;
+
+ ret = hci_recv_stream_fragment(hu->hdev, data, count);
+ if (ret < 0) {
BT_ERR("Frame Reassembly Failed");
+ return ret;
+ }
return count;
}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 48ad2a7..320f718 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -359,6 +359,7 @@
*/
static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
{
+ int ret;
struct hci_uart *hu = (void *)tty->disc_data;
if (!hu || tty != hu->tty)
@@ -368,8 +369,9 @@
return;
spin_lock(&hu->rx_lock);
- hu->proto->recv(hu, (void *) data, count);
- hu->hdev->stat.byte_rx += count;
+ ret = hu->proto->recv(hu, (void *) data, count);
+ if (ret > 0)
+ hu->hdev->stat.byte_rx += count;
spin_unlock(&hu->rx_lock);
tty_unthrottle(tty);
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 514dd8e..75fb965 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -986,6 +986,9 @@
cdinfo(CD_OPEN, "entering cdrom_open\n");
+ /* open is event synchronization point, check events first */
+ check_disk_change(bdev);
+
/* if this was a O_NONBLOCK open and we should honor the flags,
* do a quick open without drive/disc integrity checks. */
cdi->use_count++;
@@ -1012,9 +1015,6 @@
cdinfo(CD_OPEN, "Use count for \"/dev/%s\" now %d\n",
cdi->name, cdi->use_count);
- /* Do this on open. Don't wait for mount, because they might
- not be mounting, but opening with O_NONBLOCK */
- check_disk_change(bdev);
return 0;
err_release:
if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) {
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index b2b034f..3ceaf00 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -803,7 +803,6 @@
goto probe_fail_cdrom_register;
}
gd.disk->fops = &gdrom_bdops;
- gd.disk->events = DISK_EVENT_MEDIA_CHANGE;
/* latch on to the interrupt */
err = gdrom_set_interrupt_handlers();
if (err)
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 4e874c5..e427fbe 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -626,7 +626,6 @@
gendisk->queue = q;
gendisk->fops = &viocd_fops;
gendisk->flags = GENHD_FL_CD|GENHD_FL_REMOVABLE;
- gendisk->events = DISK_EVENT_MEDIA_CHANGE;
set_capacity(gendisk, 0);
gendisk->private_data = d;
d->viocd_disk = gendisk;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ad59b4e..49502bc 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -523,7 +523,7 @@
with the O_DIRECT flag.
config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
+ int "Maximum number of RAW devices to support (1-65536)"
depends on RAW_DRIVER
default "256"
help
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index a4a6c2f..cf39bc0 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -295,7 +295,7 @@
static int __init bsr_init(void)
{
struct device_node *np;
- dev_t bsr_dev = MKDEV(bsr_major, 0);
+ dev_t bsr_dev;
int ret = -ENODEV;
int result;
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 7066e80..051474c 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -84,8 +84,6 @@
.rating = 250,
.read = read_hpet,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 0, /* to be calculated */
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static struct clocksource *hpet_clocksource;
@@ -934,9 +932,7 @@
if (!hpet_clocksource) {
hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc;
CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr);
- clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq,
- clocksource_hpet.shift);
- clocksource_register(&clocksource_hpet);
+ clocksource_register_hz(&clocksource_hpet, hpetp->hp_tick_freq);
hpetp->hp_clocksource = &clocksource_hpet;
hpet_clocksource = &clocksource_hpet;
}
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index beecd1c..a60043b 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -49,7 +49,7 @@
config HW_RANDOM_AMD
tristate "AMD HW Random Number Generator support"
- depends on HW_RANDOM && X86 && PCI
+ depends on HW_RANDOM && (X86 || PPC_MAPLE) && PCI
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c
index 0d8c578..c6af038 100644
--- a/drivers/char/hw_random/amd-rng.c
+++ b/drivers/char/hw_random/amd-rng.c
@@ -133,6 +133,12 @@
pmbase &= 0x0000FF00;
if (pmbase == 0)
goto out;
+ if (!request_region(pmbase + 0xF0, 8, "AMD HWRNG")) {
+ dev_err(&pdev->dev, "AMD HWRNG region 0x%x already in use!\n",
+ pmbase + 0xF0);
+ err = -EBUSY;
+ goto out;
+ }
amd_rng.priv = (unsigned long)pmbase;
amd_pdev = pdev;
@@ -141,6 +147,7 @@
if (err) {
printk(KERN_ERR PFX "RNG registering failed (%d)\n",
err);
+ release_region(pmbase + 0xF0, 8);
goto out;
}
out:
@@ -149,6 +156,8 @@
static void __exit mod_exit(void)
{
+ u32 pmbase = (unsigned long)amd_rng.priv;
+ release_region(pmbase + 0xF0, 8);
hwrng_unregister(&amd_rng);
}
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 43ac619..ac6739e 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -619,15 +619,18 @@
pr_info("%s", version);
}
+static const struct of_device_id n2rng_match[];
static int __devinit n2rng_probe(struct platform_device *op)
{
+ const struct of_device_id *match;
int victoria_falls;
int err = -ENOMEM;
struct n2rng *np;
- if (!op->dev.of_match)
+ match = of_match_device(n2rng_match, &op->dev);
+ if (!match)
return -EINVAL;
- victoria_falls = (op->dev.of_match->data != NULL);
+ victoria_falls = (match->data != NULL);
n2rng_driver_version();
np = kzalloc(sizeof(*np), GFP_KERNEL);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index cc6c9b2..64c6b85 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2554,9 +2554,11 @@
};
#endif /* CONFIG_PCI */
+static struct of_device_id ipmi_match[];
static int __devinit ipmi_probe(struct platform_device *dev)
{
#ifdef CONFIG_OF
+ const struct of_device_id *match;
struct smi_info *info;
struct resource resource;
const __be32 *regsize, *regspacing, *regshift;
@@ -2566,7 +2568,8 @@
dev_info(&dev->dev, "probing via device tree\n");
- if (!dev->dev.of_match)
+ match = of_match_device(ipmi_match, &dev->dev);
+ if (!match)
return -EINVAL;
ret = of_address_to_resource(np, 0, &resource);
@@ -2601,7 +2604,7 @@
return -ENOMEM;
}
- info->si_type = (enum si_type) dev->dev.of_match->data;
+ info->si_type = (enum si_type) match->data;
info->addr_source = SI_DEVICETREE;
info->irq_setup = std_irq_setup;
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 436a990..8fc04b4 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -806,29 +806,41 @@
};
#endif
-static ssize_t kmsg_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
+static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv,
+ unsigned long count, loff_t pos)
{
- char *tmp;
- ssize_t ret;
+ char *line, *p;
+ int i;
+ ssize_t ret = -EFAULT;
+ size_t len = iov_length(iv, count);
- tmp = kmalloc(count + 1, GFP_KERNEL);
- if (tmp == NULL)
+ line = kmalloc(len + 1, GFP_KERNEL);
+ if (line == NULL)
return -ENOMEM;
- ret = -EFAULT;
- if (!copy_from_user(tmp, buf, count)) {
- tmp[count] = 0;
- ret = printk("%s", tmp);
- if (ret > count)
- /* printk can add a prefix */
- ret = count;
+
+ /*
+ * copy all vectors into a single string, to ensure we do
+ * not interleave our log line with other printk calls
+ */
+ p = line;
+ for (i = 0; i < count; i++) {
+ if (copy_from_user(p, iv[i].iov_base, iv[i].iov_len))
+ goto out;
+ p += iv[i].iov_len;
}
- kfree(tmp);
+ p[0] = '\0';
+
+ ret = printk("%s", line);
+ /* printk can add a prefix */
+ if (ret > len)
+ ret = len;
+out:
+ kfree(line);
return ret;
}
static const struct file_operations kmsg_fops = {
- .write = kmsg_write,
+ .aio_write = kmsg_writev,
.llseek = noop_llseek,
};
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index b4b9d5a..b33e8ea 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -21,6 +21,7 @@
#include <linux/mutex.h>
#include <linux/gfp.h>
#include <linux/compat.h>
+#include <linux/vmalloc.h>
#include <asm/uaccess.h>
@@ -30,10 +31,15 @@
};
static struct class *raw_class;
-static struct raw_device_data raw_devices[MAX_RAW_MINORS];
+static struct raw_device_data *raw_devices;
static DEFINE_MUTEX(raw_mutex);
static const struct file_operations raw_ctl_fops; /* forward declaration */
+static int max_raw_minors = MAX_RAW_MINORS;
+
+module_param(max_raw_minors, int, 0);
+MODULE_PARM_DESC(max_raw_minors, "Maximum number of raw devices (1-65536)");
+
/*
* Open/close code for raw IO.
*
@@ -125,7 +131,7 @@
struct raw_device_data *rawdev;
int err = 0;
- if (number <= 0 || number >= MAX_RAW_MINORS)
+ if (number <= 0 || number >= max_raw_minors)
return -EINVAL;
if (MAJOR(dev) != major || MINOR(dev) != minor)
@@ -312,14 +318,27 @@
dev_t dev = MKDEV(RAW_MAJOR, 0);
int ret;
- ret = register_chrdev_region(dev, MAX_RAW_MINORS, "raw");
+ if (max_raw_minors < 1 || max_raw_minors > 65536) {
+ printk(KERN_WARNING "raw: invalid max_raw_minors (must be"
+ " between 1 and 65536), using %d\n", MAX_RAW_MINORS);
+ max_raw_minors = MAX_RAW_MINORS;
+ }
+
+ raw_devices = vmalloc(sizeof(struct raw_device_data) * max_raw_minors);
+ if (!raw_devices) {
+ printk(KERN_ERR "Not enough memory for raw device structures\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+ memset(raw_devices, 0, sizeof(struct raw_device_data) * max_raw_minors);
+
+ ret = register_chrdev_region(dev, max_raw_minors, "raw");
if (ret)
goto error;
cdev_init(&raw_cdev, &raw_fops);
- ret = cdev_add(&raw_cdev, dev, MAX_RAW_MINORS);
+ ret = cdev_add(&raw_cdev, dev, max_raw_minors);
if (ret) {
- kobject_put(&raw_cdev.kobj);
goto error_region;
}
@@ -336,8 +355,9 @@
return 0;
error_region:
- unregister_chrdev_region(dev, MAX_RAW_MINORS);
+ unregister_chrdev_region(dev, max_raw_minors);
error:
+ vfree(raw_devices);
return ret;
}
@@ -346,7 +366,7 @@
device_destroy(raw_class, MKDEV(RAW_MAJOR, 0));
class_destroy(raw_class);
cdev_del(&raw_cdev);
- unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), MAX_RAW_MINORS);
+ unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), max_raw_minors);
}
module_init(raw_init);
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d6412c1..39ccdea 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -715,13 +715,13 @@
}
#ifdef CONFIG_OF
-static int __devinit hwicap_of_probe(struct platform_device *op)
+static int __devinit hwicap_of_probe(struct platform_device *op,
+ const struct hwicap_driver_config *config)
{
struct resource res;
const unsigned int *id;
const char *family;
int rc;
- const struct hwicap_driver_config *config = op->dev.of_match->data;
const struct config_registers *regs;
@@ -751,20 +751,24 @@
regs);
}
#else
-static inline int hwicap_of_probe(struct platform_device *op)
+static inline int hwicap_of_probe(struct platform_device *op,
+ const struct hwicap_driver_config *config)
{
return -EINVAL;
}
#endif /* CONFIG_OF */
+static const struct of_device_id __devinitconst hwicap_of_match[];
static int __devinit hwicap_drv_probe(struct platform_device *pdev)
{
+ const struct of_device_id *match;
struct resource *res;
const struct config_registers *regs;
const char *family;
- if (pdev->dev.of_match)
- return hwicap_of_probe(pdev);
+ match = of_match_device(hwicap_of_match, &pdev->dev);
+ if (match)
+ return hwicap_of_probe(pdev, match->data);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index 0fc0a79..6db161f 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -32,10 +32,9 @@
* Then we take the most specific entry - with the following
* order of precedence: dev+con > dev only > con only.
*/
-static struct clk *clk_find(const char *dev_id, const char *con_id)
+static struct clk_lookup *clk_find(const char *dev_id, const char *con_id)
{
- struct clk_lookup *p;
- struct clk *clk = NULL;
+ struct clk_lookup *p, *cl = NULL;
int match, best = 0;
list_for_each_entry(p, &clocks, node) {
@@ -52,27 +51,27 @@
}
if (match > best) {
- clk = p->clk;
+ cl = p;
if (match != 3)
best = match;
else
break;
}
}
- return clk;
+ return cl;
}
struct clk *clk_get_sys(const char *dev_id, const char *con_id)
{
- struct clk *clk;
+ struct clk_lookup *cl;
mutex_lock(&clocks_mutex);
- clk = clk_find(dev_id, con_id);
- if (clk && !__clk_get(clk))
- clk = NULL;
+ cl = clk_find(dev_id, con_id);
+ if (cl && !__clk_get(cl->clk))
+ cl = NULL;
mutex_unlock(&clocks_mutex);
- return clk ? clk : ERR_PTR(-ENOENT);
+ return cl ? cl->clk : ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get_sys);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 0000000..96c92191
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,5 @@
+config CLKSRC_I8253
+ bool
+
+config CLKSRC_MMIO
+ bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index be61ece..b995942 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,5 @@
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
+obj-$(CONFIG_CLKSRC_I8253) += i8253.o
+obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 64e528e..72f811f 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -29,8 +29,6 @@
.rating = 250,
.read = read_cyclone,
.mask = CYCLONE_TIMER_MASK,
- .mult = 10,
- .shift = 0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -108,12 +106,8 @@
}
cyclone_ptr = cyclone_timer;
- /* sort out mult/shift values: */
- clocksource_cyclone.shift = 22;
- clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
- clocksource_cyclone.shift);
-
- return clocksource_register(&clocksource_cyclone);
+ return clocksource_register_hz(&clocksource_cyclone,
+ CYCLONE_TIMER_FREQ);
}
arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
new file mode 100644
index 0000000..225c176
--- /dev/null
+++ b/drivers/clocksource/i8253.c
@@ -0,0 +1,88 @@
+/*
+ * i8253 PIT clocksource
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+
+#include <asm/i8253.h>
+
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t i8253_read(struct clocksource *cs)
+{
+ static int old_count;
+ static u32 old_jifs;
+ unsigned long flags;
+ int count;
+ u32 jifs;
+
+ raw_spin_lock_irqsave(&i8253_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ outb_pit(0x00, PIT_MODE); /* latch the count ASAP */
+ count = inb_pit(PIT_CH0); /* read the latched count */
+ count |= inb_pit(PIT_CH0) << 8;
+
+ /* VIA686a test code... reset the latch if count > max + 1 */
+ if (count > LATCH) {
+ outb_pit(0x34, PIT_MODE);
+ outb_pit(PIT_LATCH & 0xff, PIT_CH0);
+ outb_pit(PIT_LATCH >> 8, PIT_CH0);
+ count = PIT_LATCH - 1;
+ }
+
+ /*
+ * It's possible for count to appear to go the wrong way for a
+ * couple of reasons:
+ *
+ * 1. The timer counter underflows, but we haven't handled the
+ * resulting interrupt and incremented jiffies yet.
+ * 2. Hardware problem with the timer, not giving us continuous time,
+ * the counter does small "jumps" upwards on some Pentium systems,
+ * (see c't 95/10 page 335 for Neptun bug.)
+ *
+ * Previous attempts to handle these cases intelligently were
+ * buggy, so we just do the simple thing now.
+ */
+ if (count > old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&i8253_lock, flags);
+
+ count = (PIT_LATCH - 1) - count;
+
+ return (cycle_t)(jifs * PIT_LATCH) + count;
+}
+
+static struct clocksource i8253_cs = {
+ .name = "pit",
+ .rating = 110,
+ .read = i8253_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+int __init clocksource_i8253_init(void)
+{
+ return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+}
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
new file mode 100644
index 0000000..c0e2512
--- /dev/null
+++ b/drivers/clocksource/mmio.c
@@ -0,0 +1,73 @@
+/*
+ * Generic MMIO clocksource support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+struct clocksource_mmio {
+ void __iomem *reg;
+ struct clocksource clksrc;
+};
+
+static inline struct clocksource_mmio *to_mmio_clksrc(struct clocksource *c)
+{
+ return container_of(c, struct clocksource_mmio, clksrc);
+}
+
+cycle_t clocksource_mmio_readl_up(struct clocksource *c)
+{
+ return readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readl_down(struct clocksource *c)
+{
+ return ~readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_up(struct clocksource *c)
+{
+ return readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_down(struct clocksource *c)
+{
+ return ~(unsigned)readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+/**
+ * clocksource_mmio_init - Initialize a simple mmio based clocksource
+ * @base: Virtual address of the clock readout register
+ * @name: Name of the clocksource
+ * @hz: Frequency of the clocksource in Hz
+ * @rating: Rating of the clocksource
+ * @bits: Number of valid bits
+ * @read: One of clocksource_mmio_read*() above
+ */
+int __init clocksource_mmio_init(void __iomem *base, const char *name,
+ unsigned long hz, int rating, unsigned bits,
+ cycle_t (*read)(struct clocksource *))
+{
+ struct clocksource_mmio *cs;
+
+ if (bits > 32 || bits < 16)
+ return -EINVAL;
+
+ cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+
+ cs->reg = base;
+ cs->clksrc.name = name;
+ cs->clksrc.rating = rating;
+ cs->clksrc.read = read;
+ cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&cs->clksrc, hz);
+}
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index ca8ee80..9fb8485 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -1,3 +1,5 @@
+menu "CPU Frequency scaling"
+
config CPU_FREQ
bool "CPU Frequency scaling"
help
@@ -18,19 +20,6 @@
config CPU_FREQ_TABLE
tristate
-config CPU_FREQ_DEBUG
- bool "Enable CPUfreq debugging"
- help
- Say Y here to enable CPUfreq subsystem (including drivers)
- debugging. You will need to activate it via the kernel
- command line by passing
- cpufreq.debug=<value>
-
- To get <value>, add
- 1 to activate CPUfreq core debugging,
- 2 to activate CPUfreq drivers debugging, and
- 4 to activate CPUfreq governor debugging
-
config CPU_FREQ_STAT
tristate "CPU frequency translation statistics"
select CPU_FREQ_TABLE
@@ -190,4 +179,10 @@
If in doubt, say N.
-endif # CPU_FREQ
+menu "x86 CPU frequency scaling drivers"
+depends on X86
+source "drivers/cpufreq/Kconfig.x86"
+endmenu
+
+endif
+endmenu
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/drivers/cpufreq/Kconfig.x86
similarity index 96%
rename from arch/x86/kernel/cpu/cpufreq/Kconfig
rename to drivers/cpufreq/Kconfig.x86
index 870e6cc..78ff7ee 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig.x86
@@ -1,15 +1,7 @@
#
-# CPU Frequency scaling
+# x86 CPU Frequency scaling drivers
#
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
config X86_PCC_CPUFREQ
tristate "Processor Clocking Control interface driver"
depends on ACPI && ACPI_PROCESSOR
@@ -43,7 +35,7 @@
config ELAN_CPUFREQ
tristate "AMD Elan SC400 and SC410"
select CPU_FREQ_TABLE
- depends on X86_ELAN
+ depends on MELAN
---help---
This adds the CPUFreq driver for AMD Elan SC400 and SC410
processors.
@@ -59,7 +51,7 @@
config SC520_CPUFREQ
tristate "AMD Elan SC520"
select CPU_FREQ_TABLE
- depends on X86_ELAN
+ depends on MELAN
---help---
This adds the CPUFreq driver for AMD Elan SC520 processor.
@@ -261,6 +253,3 @@
option lets the probing code bypass some of those checks if the
parameter "relaxed_check=1" is passed to the module.
-endif # CPU_FREQ
-
-endmenu
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 71fc3b4..c7f1a6f 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,3 +13,29 @@
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
+##################################################################################d
+# x86 drivers.
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o
+obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
+obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
+obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
+obj-$(CONFIG_X86_LONGRUN) += longrun.o
+obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
+obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
+
+##################################################################################d
+
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
similarity index 94%
rename from arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
rename to drivers/cpufreq/acpi-cpufreq.c
index a2baafb..4e04e12 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -47,9 +47,6 @@
#include <asm/cpufeature.h>
#include "mperf.h"
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "acpi-cpufreq", msg)
-
MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
@@ -233,7 +230,7 @@
cmd.mask = mask;
drv_read(&cmd);
- dprintk("get_cur_val = %u\n", cmd.val);
+ pr_debug("get_cur_val = %u\n", cmd.val);
return cmd.val;
}
@@ -244,7 +241,7 @@
unsigned int freq;
unsigned int cached_freq;
- dprintk("get_cur_freq_on_cpu (%d)\n", cpu);
+ pr_debug("get_cur_freq_on_cpu (%d)\n", cpu);
if (unlikely(data == NULL ||
data->acpi_data == NULL || data->freq_table == NULL)) {
@@ -261,7 +258,7 @@
data->resume = 1;
}
- dprintk("cur freq = %u\n", freq);
+ pr_debug("cur freq = %u\n", freq);
return freq;
}
@@ -293,7 +290,7 @@
unsigned int i;
int result = 0;
- dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
+ pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
if (unlikely(data == NULL ||
data->acpi_data == NULL || data->freq_table == NULL)) {
@@ -313,11 +310,11 @@
next_perf_state = data->freq_table[next_state].index;
if (perf->state == next_perf_state) {
if (unlikely(data->resume)) {
- dprintk("Called after resume, resetting to P%d\n",
+ pr_debug("Called after resume, resetting to P%d\n",
next_perf_state);
data->resume = 0;
} else {
- dprintk("Already at target state (P%d)\n",
+ pr_debug("Already at target state (P%d)\n",
next_perf_state);
goto out;
}
@@ -357,7 +354,7 @@
if (acpi_pstate_strict) {
if (!check_freqs(cmd.mask, freqs.new, data)) {
- dprintk("acpi_cpufreq_target failed (%d)\n",
+ pr_debug("acpi_cpufreq_target failed (%d)\n",
policy->cpu);
result = -EAGAIN;
goto out;
@@ -378,7 +375,7 @@
{
struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
- dprintk("acpi_cpufreq_verify\n");
+ pr_debug("acpi_cpufreq_verify\n");
return cpufreq_frequency_table_verify(policy, data->freq_table);
}
@@ -433,11 +430,11 @@
static int __init acpi_cpufreq_early_init(void)
{
unsigned int i;
- dprintk("acpi_cpufreq_early_init\n");
+ pr_debug("acpi_cpufreq_early_init\n");
acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
if (!acpi_perf_data) {
- dprintk("Memory allocation error for acpi_perf_data.\n");
+ pr_debug("Memory allocation error for acpi_perf_data.\n");
return -ENOMEM;
}
for_each_possible_cpu(i) {
@@ -519,7 +516,7 @@
static int blacklisted;
#endif
- dprintk("acpi_cpufreq_cpu_init\n");
+ pr_debug("acpi_cpufreq_cpu_init\n");
#ifdef CONFIG_SMP
if (blacklisted)
@@ -566,7 +563,7 @@
/* capability check */
if (perf->state_count <= 1) {
- dprintk("No P-States\n");
+ pr_debug("No P-States\n");
result = -ENODEV;
goto err_unreg;
}
@@ -578,11 +575,11 @@
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
- dprintk("SYSTEM IO addr space\n");
+ pr_debug("SYSTEM IO addr space\n");
data->cpu_feature = SYSTEM_IO_CAPABLE;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
- dprintk("HARDWARE addr space\n");
+ pr_debug("HARDWARE addr space\n");
if (!check_est_cpu(cpu)) {
result = -ENODEV;
goto err_unreg;
@@ -590,7 +587,7 @@
data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
break;
default:
- dprintk("Unknown addr space %d\n",
+ pr_debug("Unknown addr space %d\n",
(u32) (perf->control_register.space_id));
result = -ENODEV;
goto err_unreg;
@@ -661,9 +658,9 @@
if (cpu_has(c, X86_FEATURE_APERFMPERF))
acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf;
- dprintk("CPU%u - ACPI performance management activated.\n", cpu);
+ pr_debug("CPU%u - ACPI performance management activated.\n", cpu);
for (i = 0; i < perf->state_count; i++)
- dprintk(" %cP%d: %d MHz, %d mW, %d uS\n",
+ pr_debug(" %cP%d: %d MHz, %d mW, %d uS\n",
(i == perf->state ? '*' : ' '), i,
(u32) perf->states[i].core_frequency,
(u32) perf->states[i].power,
@@ -694,7 +691,7 @@
{
struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
- dprintk("acpi_cpufreq_cpu_exit\n");
+ pr_debug("acpi_cpufreq_cpu_exit\n");
if (data) {
cpufreq_frequency_table_put_attr(policy->cpu);
@@ -712,7 +709,7 @@
{
struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
- dprintk("acpi_cpufreq_resume\n");
+ pr_debug("acpi_cpufreq_resume\n");
data->resume = 1;
@@ -743,7 +740,7 @@
if (acpi_disabled)
return 0;
- dprintk("acpi_cpufreq_init\n");
+ pr_debug("acpi_cpufreq_init\n");
ret = acpi_cpufreq_early_init();
if (ret)
@@ -758,7 +755,7 @@
static void __exit acpi_cpufreq_exit(void)
{
- dprintk("acpi_cpufreq_exit\n");
+ pr_debug("acpi_cpufreq_exit\n");
cpufreq_unregister_driver(&acpi_cpufreq_driver);
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
similarity index 97%
rename from arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
rename to drivers/cpufreq/cpufreq-nforce2.c
index 141abeb..7bac808 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -57,8 +57,6 @@
"Minimum FSB to use, if not defined: current FSB - 50");
#define PFX "cpufreq-nforce2: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "cpufreq-nforce2", msg)
/**
* nforce2_calc_fsb - calculate FSB
@@ -270,7 +268,7 @@
if (freqs.old == freqs.new)
return 0;
- dprintk("Old CPU frequency %d kHz, new %d kHz\n",
+ pr_debug("Old CPU frequency %d kHz, new %d kHz\n",
freqs.old, freqs.new);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -282,7 +280,7 @@
printk(KERN_ERR PFX "Changing FSB to %d failed\n",
target_fsb);
else
- dprintk("Changed FSB successfully to %d\n",
+ pr_debug("Changed FSB successfully to %d\n",
target_fsb);
/* Enable IRQs */
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2dafc5c..0a5bea9 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -32,9 +32,6 @@
#include <trace/events/power.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
- "cpufreq-core", msg)
-
/**
* The "cpufreq driver" - the arch- or hardware-dependent low
* level driver of CPUFreq support, and its spinlock. This lock
@@ -181,93 +178,6 @@
/*********************************************************************
- * UNIFIED DEBUG HELPERS *
- *********************************************************************/
-#ifdef CONFIG_CPU_FREQ_DEBUG
-
-/* what part(s) of the CPUfreq subsystem are debugged? */
-static unsigned int debug;
-
-/* is the debug output ratelimit'ed using printk_ratelimit? User can
- * set or modify this value.
- */
-static unsigned int debug_ratelimit = 1;
-
-/* is the printk_ratelimit'ing enabled? It's enabled after a successful
- * loading of a cpufreq driver, temporarily disabled when a new policy
- * is set, and disabled upon cpufreq driver removal
- */
-static unsigned int disable_ratelimit = 1;
-static DEFINE_SPINLOCK(disable_ratelimit_lock);
-
-static void cpufreq_debug_enable_ratelimit(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&disable_ratelimit_lock, flags);
- if (disable_ratelimit)
- disable_ratelimit--;
- spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-}
-
-static void cpufreq_debug_disable_ratelimit(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&disable_ratelimit_lock, flags);
- disable_ratelimit++;
- spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-}
-
-void cpufreq_debug_printk(unsigned int type, const char *prefix,
- const char *fmt, ...)
-{
- char s[256];
- va_list args;
- unsigned int len;
- unsigned long flags;
-
- WARN_ON(!prefix);
- if (type & debug) {
- spin_lock_irqsave(&disable_ratelimit_lock, flags);
- if (!disable_ratelimit && debug_ratelimit
- && !printk_ratelimit()) {
- spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-
- len = snprintf(s, 256, KERN_DEBUG "%s: ", prefix);
-
- va_start(args, fmt);
- len += vsnprintf(&s[len], (256 - len), fmt, args);
- va_end(args);
-
- printk(s);
-
- WARN_ON(len < 5);
- }
-}
-EXPORT_SYMBOL(cpufreq_debug_printk);
-
-
-module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
- " 2 to debug drivers, and 4 to debug governors.");
-
-module_param(debug_ratelimit, uint, 0644);
-MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
- " set to 0 to disable ratelimiting.");
-
-#else /* !CONFIG_CPU_FREQ_DEBUG */
-
-static inline void cpufreq_debug_enable_ratelimit(void) { return; }
-static inline void cpufreq_debug_disable_ratelimit(void) { return; }
-
-#endif /* CONFIG_CPU_FREQ_DEBUG */
-
-
-/*********************************************************************
* EXTERNALLY AFFECTING FREQUENCY CHANGES *
*********************************************************************/
@@ -291,7 +201,7 @@
if (!l_p_j_ref_freq) {
l_p_j_ref = loops_per_jiffy;
l_p_j_ref_freq = ci->old;
- dprintk("saving %lu as reference value for loops_per_jiffy; "
+ pr_debug("saving %lu as reference value for loops_per_jiffy; "
"freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
}
if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
@@ -299,7 +209,7 @@
(val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
ci->new);
- dprintk("scaling loops_per_jiffy to %lu "
+ pr_debug("scaling loops_per_jiffy to %lu "
"for frequency %u kHz\n", loops_per_jiffy, ci->new);
}
}
@@ -326,7 +236,7 @@
BUG_ON(irqs_disabled());
freqs->flags = cpufreq_driver->flags;
- dprintk("notification %u of frequency transition to %u kHz\n",
+ pr_debug("notification %u of frequency transition to %u kHz\n",
state, freqs->new);
policy = per_cpu(cpufreq_cpu_data, freqs->cpu);
@@ -340,7 +250,7 @@
if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
if ((policy) && (policy->cpu == freqs->cpu) &&
(policy->cur) && (policy->cur != freqs->old)) {
- dprintk("Warning: CPU frequency is"
+ pr_debug("Warning: CPU frequency is"
" %u, cpufreq assumed %u kHz.\n",
freqs->old, policy->cur);
freqs->old = policy->cur;
@@ -353,7 +263,7 @@
case CPUFREQ_POSTCHANGE:
adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
- dprintk("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
+ pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
(unsigned long)freqs->cpu);
trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
trace_cpu_frequency(freqs->new, freqs->cpu);
@@ -411,21 +321,14 @@
t = __find_governor(str_governor);
if (t == NULL) {
- char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
- str_governor);
+ int ret;
- if (name) {
- int ret;
+ mutex_unlock(&cpufreq_governor_mutex);
+ ret = request_module("cpufreq_%s", str_governor);
+ mutex_lock(&cpufreq_governor_mutex);
- mutex_unlock(&cpufreq_governor_mutex);
- ret = request_module("%s", name);
- mutex_lock(&cpufreq_governor_mutex);
-
- if (ret == 0)
- t = __find_governor(str_governor);
- }
-
- kfree(name);
+ if (ret == 0)
+ t = __find_governor(str_governor);
}
if (t != NULL) {
@@ -753,7 +656,7 @@
static void cpufreq_sysfs_release(struct kobject *kobj)
{
struct cpufreq_policy *policy = to_policy(kobj);
- dprintk("last reference is dropped\n");
+ pr_debug("last reference is dropped\n");
complete(&policy->kobj_unregister);
}
@@ -788,7 +691,7 @@
gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu));
if (gov) {
policy->governor = gov;
- dprintk("Restoring governor %s for cpu %d\n",
+ pr_debug("Restoring governor %s for cpu %d\n",
policy->governor->name, cpu);
}
#endif
@@ -824,7 +727,7 @@
per_cpu(cpufreq_cpu_data, cpu) = managed_policy;
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- dprintk("CPU already managed, adding link\n");
+ pr_debug("CPU already managed, adding link\n");
ret = sysfs_create_link(&sys_dev->kobj,
&managed_policy->kobj,
"cpufreq");
@@ -865,7 +768,7 @@
if (!cpu_online(j))
continue;
- dprintk("CPU %u already managed, adding link\n", j);
+ pr_debug("CPU %u already managed, adding link\n", j);
managed_policy = cpufreq_cpu_get(cpu);
cpu_sys_dev = get_cpu_sysdev(j);
ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
@@ -941,7 +844,7 @@
policy->user_policy.governor = policy->governor;
if (ret) {
- dprintk("setting policy failed\n");
+ pr_debug("setting policy failed\n");
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
}
@@ -977,8 +880,7 @@
if (cpu_is_offline(cpu))
return 0;
- cpufreq_debug_disable_ratelimit();
- dprintk("adding CPU %u\n", cpu);
+ pr_debug("adding CPU %u\n", cpu);
#ifdef CONFIG_SMP
/* check whether a different CPU already registered this
@@ -986,7 +888,6 @@
policy = cpufreq_cpu_get(cpu);
if (unlikely(policy)) {
cpufreq_cpu_put(policy);
- cpufreq_debug_enable_ratelimit();
return 0;
}
#endif
@@ -1037,7 +938,7 @@
*/
ret = cpufreq_driver->init(policy);
if (ret) {
- dprintk("initialization failed\n");
+ pr_debug("initialization failed\n");
goto err_unlock_policy;
}
policy->user_policy.min = policy->min;
@@ -1063,8 +964,7 @@
kobject_uevent(&policy->kobj, KOBJ_ADD);
module_put(cpufreq_driver->owner);
- dprintk("initialization complete\n");
- cpufreq_debug_enable_ratelimit();
+ pr_debug("initialization complete\n");
return 0;
@@ -1088,7 +988,6 @@
nomem_out:
module_put(cpufreq_driver->owner);
module_out:
- cpufreq_debug_enable_ratelimit();
return ret;
}
@@ -1112,15 +1011,13 @@
unsigned int j;
#endif
- cpufreq_debug_disable_ratelimit();
- dprintk("unregistering CPU %u\n", cpu);
+ pr_debug("unregistering CPU %u\n", cpu);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
data = per_cpu(cpufreq_cpu_data, cpu);
if (!data) {
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- cpufreq_debug_enable_ratelimit();
unlock_policy_rwsem_write(cpu);
return -EINVAL;
}
@@ -1132,12 +1029,11 @@
* only need to unlink, put and exit
*/
if (unlikely(cpu != data->cpu)) {
- dprintk("removing link\n");
+ pr_debug("removing link\n");
cpumask_clear_cpu(cpu, data->cpus);
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
kobj = &sys_dev->kobj;
cpufreq_cpu_put(data);
- cpufreq_debug_enable_ratelimit();
unlock_policy_rwsem_write(cpu);
sysfs_remove_link(kobj, "cpufreq");
return 0;
@@ -1170,7 +1066,7 @@
for_each_cpu(j, data->cpus) {
if (j == cpu)
continue;
- dprintk("removing link for cpu %u\n", j);
+ pr_debug("removing link for cpu %u\n", j);
#ifdef CONFIG_HOTPLUG_CPU
strncpy(per_cpu(cpufreq_cpu_governor, j),
data->governor->name, CPUFREQ_NAME_LEN);
@@ -1199,21 +1095,35 @@
* not referenced anymore by anybody before we proceed with
* unloading.
*/
- dprintk("waiting for dropping of refcount\n");
+ pr_debug("waiting for dropping of refcount\n");
wait_for_completion(cmp);
- dprintk("wait complete\n");
+ pr_debug("wait complete\n");
lock_policy_rwsem_write(cpu);
if (cpufreq_driver->exit)
cpufreq_driver->exit(data);
unlock_policy_rwsem_write(cpu);
+#ifdef CONFIG_HOTPLUG_CPU
+ /* when the CPU which is the parent of the kobj is hotplugged
+ * offline, check for siblings, and create cpufreq sysfs interface
+ * and symlinks
+ */
+ if (unlikely(cpumask_weight(data->cpus) > 1)) {
+ /* first sibling now owns the new sysfs dir */
+ cpumask_clear_cpu(cpu, data->cpus);
+ cpufreq_add_dev(get_cpu_sysdev(cpumask_first(data->cpus)));
+
+ /* finally remove our own symlink */
+ lock_policy_rwsem_write(cpu);
+ __cpufreq_remove_dev(sys_dev);
+ }
+#endif
+
free_cpumask_var(data->related_cpus);
free_cpumask_var(data->cpus);
kfree(data);
- per_cpu(cpufreq_cpu_data, cpu) = NULL;
- cpufreq_debug_enable_ratelimit();
return 0;
}
@@ -1239,7 +1149,7 @@
struct cpufreq_policy *policy =
container_of(work, struct cpufreq_policy, update);
unsigned int cpu = policy->cpu;
- dprintk("handle_update for cpu %u called\n", cpu);
+ pr_debug("handle_update for cpu %u called\n", cpu);
cpufreq_update_policy(cpu);
}
@@ -1257,7 +1167,7 @@
{
struct cpufreq_freqs freqs;
- dprintk("Warning: CPU frequency out of sync: cpufreq and timing "
+ pr_debug("Warning: CPU frequency out of sync: cpufreq and timing "
"core thinks of %u, is %u kHz.\n", old_freq, new_freq);
freqs.cpu = cpu;
@@ -1360,7 +1270,7 @@
int cpu = smp_processor_id();
struct cpufreq_policy *cpu_policy;
- dprintk("suspending cpu %u\n", cpu);
+ pr_debug("suspending cpu %u\n", cpu);
/* If there's no policy for the boot CPU, we have nothing to do. */
cpu_policy = cpufreq_cpu_get(cpu);
@@ -1398,7 +1308,7 @@
int cpu = smp_processor_id();
struct cpufreq_policy *cpu_policy;
- dprintk("resuming cpu %u\n", cpu);
+ pr_debug("resuming cpu %u\n", cpu);
/* If there's no policy for the boot CPU, we have nothing to do. */
cpu_policy = cpufreq_cpu_get(cpu);
@@ -1510,7 +1420,7 @@
{
int retval = -EINVAL;
- dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
+ pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
target_freq, relation);
if (cpu_online(policy->cpu) && cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
@@ -1596,7 +1506,7 @@
if (!try_module_get(policy->governor->owner))
return -EINVAL;
- dprintk("__cpufreq_governor for CPU %u, event %u\n",
+ pr_debug("__cpufreq_governor for CPU %u, event %u\n",
policy->cpu, event);
ret = policy->governor->governor(policy, event);
@@ -1697,8 +1607,7 @@
{
int ret = 0;
- cpufreq_debug_disable_ratelimit();
- dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
+ pr_debug("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
policy->min, policy->max);
memcpy(&policy->cpuinfo, &data->cpuinfo,
@@ -1735,19 +1644,19 @@
data->min = policy->min;
data->max = policy->max;
- dprintk("new min and max freqs are %u - %u kHz\n",
+ pr_debug("new min and max freqs are %u - %u kHz\n",
data->min, data->max);
if (cpufreq_driver->setpolicy) {
data->policy = policy->policy;
- dprintk("setting range\n");
+ pr_debug("setting range\n");
ret = cpufreq_driver->setpolicy(policy);
} else {
if (policy->governor != data->governor) {
/* save old, working values */
struct cpufreq_governor *old_gov = data->governor;
- dprintk("governor switch\n");
+ pr_debug("governor switch\n");
/* end old governor */
if (data->governor)
@@ -1757,7 +1666,7 @@
data->governor = policy->governor;
if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
/* new governor failed, so re-start old one */
- dprintk("starting governor %s failed\n",
+ pr_debug("starting governor %s failed\n",
data->governor->name);
if (old_gov) {
data->governor = old_gov;
@@ -1769,12 +1678,11 @@
}
/* might be a policy change, too, so fall through */
}
- dprintk("governor: change or update limits\n");
+ pr_debug("governor: change or update limits\n");
__cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
}
error_out:
- cpufreq_debug_enable_ratelimit();
return ret;
}
@@ -1801,7 +1709,7 @@
goto fail;
}
- dprintk("updating policy for CPU %u\n", cpu);
+ pr_debug("updating policy for CPU %u\n", cpu);
memcpy(&policy, data, sizeof(struct cpufreq_policy));
policy.min = data->user_policy.min;
policy.max = data->user_policy.max;
@@ -1813,7 +1721,7 @@
if (cpufreq_driver->get) {
policy.cur = cpufreq_driver->get(cpu);
if (!data->cur) {
- dprintk("Driver did not initialize current freq");
+ pr_debug("Driver did not initialize current freq");
data->cur = policy.cur;
} else {
if (data->cur != policy.cur)
@@ -1889,7 +1797,7 @@
((!driver_data->setpolicy) && (!driver_data->target)))
return -EINVAL;
- dprintk("trying to register driver %s\n", driver_data->name);
+ pr_debug("trying to register driver %s\n", driver_data->name);
if (driver_data->setpolicy)
driver_data->flags |= CPUFREQ_CONST_LOOPS;
@@ -1920,15 +1828,14 @@
/* if all ->init() calls failed, unregister */
if (ret) {
- dprintk("no CPU initialized for driver %s\n",
+ pr_debug("no CPU initialized for driver %s\n",
driver_data->name);
goto err_sysdev_unreg;
}
}
register_hotcpu_notifier(&cpufreq_cpu_notifier);
- dprintk("driver %s up and running\n", driver_data->name);
- cpufreq_debug_enable_ratelimit();
+ pr_debug("driver %s up and running\n", driver_data->name);
return 0;
err_sysdev_unreg:
@@ -1955,14 +1862,10 @@
{
unsigned long flags;
- cpufreq_debug_disable_ratelimit();
-
- if (!cpufreq_driver || (driver != cpufreq_driver)) {
- cpufreq_debug_enable_ratelimit();
+ if (!cpufreq_driver || (driver != cpufreq_driver))
return -EINVAL;
- }
- dprintk("unregistering driver %s\n", driver->name);
+ pr_debug("unregistering driver %s\n", driver->name);
sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
unregister_hotcpu_notifier(&cpufreq_cpu_notifier);
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index 7e2e5150..f13a8a9 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -15,9 +15,6 @@
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) \
- cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
-
static int cpufreq_governor_performance(struct cpufreq_policy *policy,
unsigned int event)
@@ -25,7 +22,7 @@
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n",
+ pr_debug("setting to %u kHz because of event %u\n",
policy->max, event);
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index e6db5fa..4c2eb51 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -15,16 +15,13 @@
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) \
- cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
-
static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
unsigned int event)
{
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n",
+ pr_debug("setting to %u kHz because of event %u\n",
policy->min, event);
__cpufreq_driver_target(policy, policy->min,
CPUFREQ_RELATION_L);
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 00d73fc..b60a4c2 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -165,17 +165,27 @@
return -1;
}
+/* should be called late in the CPU removal sequence so that the stats
+ * memory is still available in case someone tries to use it.
+ */
static void cpufreq_stats_free_table(unsigned int cpu)
{
struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
- struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- if (policy && policy->cpu == cpu)
- sysfs_remove_group(&policy->kobj, &stats_attr_group);
if (stat) {
kfree(stat->time_in_state);
kfree(stat);
}
per_cpu(cpufreq_stats_table, cpu) = NULL;
+}
+
+/* must be called early in the CPU removal sequence (before
+ * cpufreq_remove_dev) so that policy is still valid.
+ */
+static void cpufreq_stats_free_sysfs(unsigned int cpu)
+{
+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+ if (policy && policy->cpu == cpu)
+ sysfs_remove_group(&policy->kobj, &stats_attr_group);
if (policy)
cpufreq_cpu_put(policy);
}
@@ -316,6 +326,9 @@
case CPU_ONLINE_FROZEN:
cpufreq_update_policy(cpu);
break;
+ case CPU_DOWN_PREPARE:
+ cpufreq_stats_free_sysfs(cpu);
+ break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
cpufreq_stats_free_table(cpu);
@@ -324,9 +337,10 @@
return NOTIFY_OK;
}
-static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
-{
+/* priority=1 so this will get called before cpufreq_remove_dev */
+static struct notifier_block cpufreq_stat_cpu_notifier __refdata = {
.notifier_call = cpufreq_stat_cpu_callback,
+ .priority = 1,
};
static struct notifier_block notifier_policy_block = {
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index 66d2d1d..f231015 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -37,9 +37,6 @@
static DEFINE_MUTEX(userspace_mutex);
static int cpus_using_userspace_governor;
-#define dprintk(msg...) \
- cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
-
/* keep track of frequency transitions */
static int
userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
@@ -50,7 +47,7 @@
if (!per_cpu(cpu_is_managed, freq->cpu))
return 0;
- dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
+ pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n",
freq->cpu, freq->new);
per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
@@ -73,7 +70,7 @@
{
int ret = -EINVAL;
- dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
+ pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
mutex_lock(&userspace_mutex);
if (!per_cpu(cpu_is_managed, policy->cpu))
@@ -134,7 +131,7 @@
per_cpu(cpu_max_freq, cpu) = policy->max;
per_cpu(cpu_cur_freq, cpu) = policy->cur;
per_cpu(cpu_set_freq, cpu) = policy->cur;
- dprintk("managing cpu %u started "
+ pr_debug("managing cpu %u started "
"(%u - %u kHz, currently %u kHz)\n",
cpu,
per_cpu(cpu_min_freq, cpu),
@@ -156,12 +153,12 @@
per_cpu(cpu_min_freq, cpu) = 0;
per_cpu(cpu_max_freq, cpu) = 0;
per_cpu(cpu_set_freq, cpu) = 0;
- dprintk("managing cpu %u stopped\n", cpu);
+ pr_debug("managing cpu %u stopped\n", cpu);
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_LIMITS:
mutex_lock(&userspace_mutex);
- dprintk("limit event for cpu %u: %u - %u kHz, "
+ pr_debug("limit event for cpu %u: %u - %u kHz, "
"currently %u kHz, last set to %u kHz\n",
cpu, policy->min, policy->max,
per_cpu(cpu_cur_freq, cpu),
diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/e_powersaver.c
rename to drivers/cpufreq/e_powersaver.c
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/elanfreq.c
rename to drivers/cpufreq/elanfreq.c
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 0543221..90431cb 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -14,9 +14,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#define dprintk(msg...) \
- cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
-
/*********************************************************************
* FREQUENCY TABLE HELPERS *
*********************************************************************/
@@ -31,11 +28,11 @@
for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
unsigned int freq = table[i].frequency;
if (freq == CPUFREQ_ENTRY_INVALID) {
- dprintk("table entry %u is invalid, skipping\n", i);
+ pr_debug("table entry %u is invalid, skipping\n", i);
continue;
}
- dprintk("table entry %u: %u kHz, %u index\n",
+ pr_debug("table entry %u: %u kHz, %u index\n",
i, freq, table[i].index);
if (freq < min_freq)
min_freq = freq;
@@ -61,7 +58,7 @@
unsigned int i;
unsigned int count = 0;
- dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n",
+ pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
policy->min, policy->max, policy->cpu);
if (!cpu_online(policy->cpu))
@@ -86,7 +83,7 @@
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
- dprintk("verification lead to (%u - %u kHz) for cpu %u\n",
+ pr_debug("verification lead to (%u - %u kHz) for cpu %u\n",
policy->min, policy->max, policy->cpu);
return 0;
@@ -110,7 +107,7 @@
};
unsigned int i;
- dprintk("request for target %u kHz (relation: %u) for cpu %u\n",
+ pr_debug("request for target %u kHz (relation: %u) for cpu %u\n",
target_freq, relation, policy->cpu);
switch (relation) {
@@ -167,7 +164,7 @@
} else
*index = optimal.index;
- dprintk("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
+ pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
table[*index].index);
return 0;
@@ -216,14 +213,14 @@
void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
unsigned int cpu)
{
- dprintk("setting show_table for cpu %u to %p\n", cpu, table);
+ pr_debug("setting show_table for cpu %u to %p\n", cpu, table);
per_cpu(cpufreq_show_table, cpu) = table;
}
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_attr);
void cpufreq_frequency_table_put_attr(unsigned int cpu)
{
- dprintk("clearing show_table for cpu %u\n", cpu);
+ pr_debug("clearing show_table for cpu %u\n", cpu);
per_cpu(cpufreq_show_table, cpu) = NULL;
}
EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr);
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c
similarity index 95%
rename from arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
rename to drivers/cpufreq/gx-suspmod.c
index 32974cf..ffe1f2c 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/drivers/cpufreq/gx-suspmod.c
@@ -142,9 +142,6 @@
#define POLICY_MIN_DIV 20
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "gx-suspmod", msg)
-
/**
* we can detect a core multipiler from dir0_lsb
* from GX1 datasheet p.56,
@@ -191,7 +188,7 @@
/* check if CPU is a MediaGX or a Geode. */
if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
(boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
- dprintk("error: no MediaGX/Geode processor found!\n");
+ pr_debug("error: no MediaGX/Geode processor found!\n");
return NULL;
}
@@ -201,7 +198,7 @@
return gx_pci;
}
- dprintk("error: no supported chipset found!\n");
+ pr_debug("error: no supported chipset found!\n");
return NULL;
}
@@ -305,14 +302,14 @@
break;
default:
local_irq_restore(flags);
- dprintk("fatal: try to set unknown chipset.\n");
+ pr_debug("fatal: try to set unknown chipset.\n");
return;
}
} else {
suscfg = gx_params->pci_suscfg & ~(SUSMOD);
gx_params->off_duration = 0;
gx_params->on_duration = 0;
- dprintk("suspend modulation disabled: cpu runs 100%% speed.\n");
+ pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n");
}
gx_write_byte(PCI_MODOFF, gx_params->off_duration);
@@ -327,9 +324,9 @@
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+ pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
gx_params->on_duration * 32, gx_params->off_duration * 32);
- dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
+ pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
}
/****************************************************************
@@ -428,8 +425,8 @@
stock_freq = maxfreq;
curfreq = gx_get_cpuspeed(0);
- dprintk("cpu max frequency is %d.\n", maxfreq);
- dprintk("cpu current frequency is %dkHz.\n", curfreq);
+ pr_debug("cpu max frequency is %d.\n", maxfreq);
+ pr_debug("cpu current frequency is %dkHz.\n", curfreq);
/* setup basic struct for cpufreq API */
policy->cpu = 0;
@@ -475,7 +472,7 @@
if (max_duration > 0xff)
max_duration = 0xff;
- dprintk("geode suspend modulation available.\n");
+ pr_debug("geode suspend modulation available.\n");
params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
if (params == NULL)
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
similarity index 98%
rename from arch/x86/kernel/cpu/cpufreq/longhaul.c
rename to drivers/cpufreq/longhaul.c
index cf48cdd..f47d26e 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -77,9 +77,6 @@
static int disable_acpi_c3;
static int revid_errata;
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "longhaul", msg)
-
/* Clock ratios multiplied by 10 */
static int mults[32];
@@ -87,7 +84,6 @@
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
-#ifdef CONFIG_CPU_FREQ_DEBUG
static char speedbuffer[8];
static char *print_speed(int speed)
@@ -106,7 +102,6 @@
return speedbuffer;
}
-#endif
static unsigned int calc_speed(int mult)
@@ -275,7 +270,7 @@
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+ pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
retry_loop:
preempt_disable();
@@ -460,12 +455,12 @@
break;
}
- dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n",
+ pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10);
highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult);
- dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
+ pr_debug("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
print_speed(lowest_speed/1000),
print_speed(highest_speed/1000));
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/drivers/cpufreq/longhaul.h
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/longhaul.h
rename to drivers/cpufreq/longhaul.h
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/drivers/cpufreq/longrun.c
similarity index 94%
rename from arch/x86/kernel/cpu/cpufreq/longrun.c
rename to drivers/cpufreq/longrun.c
index d9f5136..34ea359 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/drivers/cpufreq/longrun.c
@@ -15,9 +15,6 @@
#include <asm/msr.h>
#include <asm/processor.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "longrun", msg)
-
static struct cpufreq_driver longrun_driver;
/**
@@ -40,14 +37,14 @@
u32 msr_lo, msr_hi;
rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
- dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi);
+ pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
if (msr_lo & 0x01)
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
else
policy->policy = CPUFREQ_POLICY_POWERSAVE;
rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
- dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+ pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
msr_lo &= 0x0000007F;
msr_hi &= 0x0000007F;
@@ -150,7 +147,7 @@
return 0;
cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
- dprintk("cpuid eax is %u\n", eax);
+ pr_debug("cpuid eax is %u\n", eax);
return eax * 1000;
}
@@ -196,7 +193,7 @@
rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
*high_freq = msr_lo * 1000; /* to kHz */
- dprintk("longrun table interface told %u - %u kHz\n",
+ pr_debug("longrun table interface told %u - %u kHz\n",
*low_freq, *high_freq);
if (*low_freq > *high_freq)
@@ -207,7 +204,7 @@
/* set the upper border to the value determined during TSC init */
*high_freq = (cpu_khz / 1000);
*high_freq = *high_freq * 1000;
- dprintk("high frequency is %u kHz\n", *high_freq);
+ pr_debug("high frequency is %u kHz\n", *high_freq);
/* get current borders */
rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
@@ -233,7 +230,7 @@
/* restore values */
wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
}
- dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+ pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
* eqals
@@ -249,7 +246,7 @@
edx = ((eax - ebx) * 100) / (100 - ecx);
*low_freq = edx * 1000; /* back to kHz */
- dprintk("low frequency is %u kHz\n", *low_freq);
+ pr_debug("low frequency is %u kHz\n", *low_freq);
if (*low_freq > *high_freq)
*low_freq = *high_freq;
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/drivers/cpufreq/mperf.c
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/mperf.c
rename to drivers/cpufreq/mperf.c
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/drivers/cpufreq/mperf.h
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/mperf.h
rename to drivers/cpufreq/mperf.h
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
similarity index 96%
rename from arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
rename to drivers/cpufreq/p4-clockmod.c
index 52c9364..6be3e07 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -35,8 +35,6 @@
#include "speedstep-lib.h"
#define PFX "p4-clockmod: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "p4-clockmod", msg)
/*
* Duty Cycle (3bits), note DC_DISABLE is not specified in
@@ -66,7 +64,7 @@
rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
if (l & 0x01)
- dprintk("CPU#%d currently thermal throttled\n", cpu);
+ pr_debug("CPU#%d currently thermal throttled\n", cpu);
if (has_N44_O17_errata[cpu] &&
(newstate == DC_25PT || newstate == DC_DFLT))
@@ -74,10 +72,10 @@
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
if (newstate == DC_DISABLE) {
- dprintk("CPU#%d disabling modulation\n", cpu);
+ pr_debug("CPU#%d disabling modulation\n", cpu);
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
} else {
- dprintk("CPU#%d setting duty cycle to %d%%\n",
+ pr_debug("CPU#%d setting duty cycle to %d%%\n",
cpu, ((125 * newstate) / 10));
/* bits 63 - 5 : reserved
* bit 4 : enable/disable
@@ -217,7 +215,7 @@
case 0x0f11:
case 0x0f12:
has_N44_O17_errata[policy->cpu] = 1;
- dprintk("has errata -- disabling low frequencies\n");
+ pr_debug("has errata -- disabling low frequencies\n");
}
if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
similarity index 90%
rename from arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
rename to drivers/cpufreq/pcc-cpufreq.c
index 755a31e..7b0603e 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -39,7 +39,7 @@
#include <acpi/processor.h>
-#define PCC_VERSION "1.00.00"
+#define PCC_VERSION "1.10.00"
#define POLL_LOOPS 300
#define CMD_COMPLETE 0x1
@@ -48,9 +48,6 @@
#define BUF_SZ 4
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "pcc-cpufreq", msg)
-
struct pcc_register_resource {
u8 descriptor;
u16 length;
@@ -102,7 +99,7 @@
static u64 doorbell_preserve;
static u64 doorbell_write;
-static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f,
+static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49,
0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
struct pcc_cpu {
@@ -152,7 +149,7 @@
spin_lock(&pcc_lock);
- dprintk("get: get_freq for CPU %d\n", cpu);
+ pr_debug("get: get_freq for CPU %d\n", cpu);
pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
input_buffer = 0x1;
@@ -170,7 +167,7 @@
status = ioread16(&pcch_hdr->status);
if (status != CMD_COMPLETE) {
- dprintk("get: FAILED: for CPU %d, status is %d\n",
+ pr_debug("get: FAILED: for CPU %d, status is %d\n",
cpu, status);
goto cmd_incomplete;
}
@@ -178,14 +175,14 @@
curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
/ 100) * 1000);
- dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is "
- "0x%x, contains a value of: 0x%x. Speed is: %d MHz\n",
+ pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is "
+ "0x%p, contains a value of: 0x%x. Speed is: %d MHz\n",
cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
output_buffer, curr_freq);
freq_limit = (output_buffer >> 8) & 0xff;
if (freq_limit != 0xff) {
- dprintk("get: frequency for cpu %d is being temporarily"
+ pr_debug("get: frequency for cpu %d is being temporarily"
" capped at %d\n", cpu, curr_freq);
}
@@ -212,8 +209,8 @@
cpu = policy->cpu;
pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
- dprintk("target: CPU %d should go to target freq: %d "
- "(virtual) input_offset is 0x%x\n",
+ pr_debug("target: CPU %d should go to target freq: %d "
+ "(virtual) input_offset is 0x%p\n",
cpu, target_freq,
(pcch_virt_addr + pcc_cpu_data->input_offset));
@@ -234,14 +231,14 @@
status = ioread16(&pcch_hdr->status);
if (status != CMD_COMPLETE) {
- dprintk("target: FAILED for cpu %d, with status: 0x%x\n",
+ pr_debug("target: FAILED for cpu %d, with status: 0x%x\n",
cpu, status);
goto cmd_incomplete;
}
iowrite16(0, &pcch_hdr->status);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- dprintk("target: was SUCCESSFUL for cpu %d\n", cpu);
+ pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu);
spin_unlock(&pcc_lock);
return 0;
@@ -293,7 +290,7 @@
memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
- dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data "
+ pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data "
"input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
out_free:
@@ -410,7 +407,7 @@
if (ACPI_SUCCESS(status)) {
ret = pcc_cpufreq_do_osc(&osc_handle);
if (ret)
- dprintk("probe: _OSC evaluation did not succeed\n");
+ pr_debug("probe: _OSC evaluation did not succeed\n");
/* Firmware's use of _OSC is optional */
ret = 0;
}
@@ -433,7 +430,7 @@
mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
- dprintk("probe: mem_resource descriptor: 0x%x,"
+ pr_debug("probe: mem_resource descriptor: 0x%x,"
" length: %d, space_id: %d, resource_usage: %d,"
" type_specific: %d, granularity: 0x%llx,"
" minimum: 0x%llx, maximum: 0x%llx,"
@@ -453,13 +450,13 @@
pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
mem_resource->address_length);
if (pcch_virt_addr == NULL) {
- dprintk("probe: could not map shared mem region\n");
+ pr_debug("probe: could not map shared mem region\n");
goto out_free;
}
pcch_hdr = pcch_virt_addr;
- dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
- dprintk("probe: PCCH header is at physical address: 0x%llx,"
+ pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
+ pr_debug("probe: PCCH header is at physical address: 0x%llx,"
" signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
" supported features: 0x%x, command field: 0x%x,"
" status field: 0x%x, nominal latency: %d us\n",
@@ -469,7 +466,7 @@
ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
ioread32(&pcch_hdr->latency));
- dprintk("probe: min time between commands: %d us,"
+ pr_debug("probe: min time between commands: %d us,"
" max time between commands: %d us,"
" nominal CPU frequency: %d MHz,"
" minimum CPU frequency: %d MHz,"
@@ -494,7 +491,7 @@
doorbell.access_width = 64;
doorbell.address = reg_resource->address;
- dprintk("probe: doorbell: space_id is %d, bit_width is %d, "
+ pr_debug("probe: doorbell: space_id is %d, bit_width is %d, "
"bit_offset is %d, access_width is %d, address is 0x%llx\n",
doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
doorbell.access_width, reg_resource->address);
@@ -515,7 +512,7 @@
doorbell_write = member->integer.value;
- dprintk("probe: doorbell_preserve: 0x%llx,"
+ pr_debug("probe: doorbell_preserve: 0x%llx,"
" doorbell_write: 0x%llx\n",
doorbell_preserve, doorbell_write);
@@ -550,7 +547,7 @@
result = pcc_get_offset(cpu);
if (result) {
- dprintk("init: PCCP evaluation failed\n");
+ pr_debug("init: PCCP evaluation failed\n");
goto out;
}
@@ -561,12 +558,12 @@
policy->cur = pcc_get_freq(cpu);
if (!policy->cur) {
- dprintk("init: Unable to get current CPU frequency\n");
+ pr_debug("init: Unable to get current CPU frequency\n");
result = -EINVAL;
goto out;
}
- dprintk("init: policy->max is %d, policy->min is %d\n",
+ pr_debug("init: policy->max is %d, policy->min is %d\n",
policy->max, policy->min);
out:
return result;
@@ -597,7 +594,7 @@
ret = pcc_cpufreq_probe();
if (ret) {
- dprintk("pcc_cpufreq_init: PCCH evaluation failed\n");
+ pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n");
return ret;
}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/powernow-k6.c
rename to drivers/cpufreq/powernow-k6.c
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
similarity index 95%
rename from arch/x86/kernel/cpu/cpufreq/powernow-k7.c
rename to drivers/cpufreq/powernow-k7.c
index 4a45fd6..d71d9f3 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -68,7 +68,6 @@
};
#endif
-#ifdef CONFIG_CPU_FREQ_DEBUG
/* divide by 1000 to get VCore voltage in V. */
static const int mobile_vid_table[32] = {
2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
@@ -76,7 +75,6 @@
1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
1075, 1050, 1025, 1000, 975, 950, 925, 0,
};
-#endif
/* divide by 10 to get FID. */
static const int fid_codes[32] = {
@@ -103,9 +101,6 @@
static unsigned int latency;
static char have_a0;
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "powernow-k7", msg)
-
static int check_fsb(unsigned int fsbspeed)
{
int delta;
@@ -209,7 +204,7 @@
vid = *pst++;
powernow_table[j].index |= (vid << 8); /* upper 8 bits */
- dprintk(" FID: 0x%x (%d.%dx [%dMHz]) "
+ pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) "
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
fid_codes[fid] % 10, speed/1000, vid,
mobile_vid_table[vid]/1000,
@@ -367,7 +362,7 @@
unsigned int speed, speed_mhz;
pc.val = (unsigned long) state->control;
- dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+ pr_debug("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
i,
(u32) state->core_frequency,
(u32) state->power,
@@ -401,7 +396,7 @@
invalidate_entry(i);
}
- dprintk(" FID: 0x%x (%d.%dx [%dMHz]) "
+ pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) "
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
fid_codes[fid] % 10, speed_mhz, vid,
mobile_vid_table[vid]/1000,
@@ -409,7 +404,7 @@
if (state->core_frequency != speed_mhz) {
state->core_frequency = speed_mhz;
- dprintk(" Corrected ACPI frequency to %d\n",
+ pr_debug(" Corrected ACPI frequency to %d\n",
speed_mhz);
}
@@ -453,8 +448,8 @@
static void print_pst_entry(struct pst_s *pst, unsigned int j)
{
- dprintk("PST:%d (@%p)\n", j, pst);
- dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
+ pr_debug("PST:%d (@%p)\n", j, pst);
+ pr_debug(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
}
@@ -474,20 +469,20 @@
p = phys_to_virt(i);
if (memcmp(p, "AMDK7PNOW!", 10) == 0) {
- dprintk("Found PSB header at %p\n", p);
+ pr_debug("Found PSB header at %p\n", p);
psb = (struct psb_s *) p;
- dprintk("Table version: 0x%x\n", psb->tableversion);
+ pr_debug("Table version: 0x%x\n", psb->tableversion);
if (psb->tableversion != 0x12) {
printk(KERN_INFO PFX "Sorry, only v1.2 tables"
" supported right now\n");
return -ENODEV;
}
- dprintk("Flags: 0x%x\n", psb->flags);
+ pr_debug("Flags: 0x%x\n", psb->flags);
if ((psb->flags & 1) == 0)
- dprintk("Mobile voltage regulator\n");
+ pr_debug("Mobile voltage regulator\n");
else
- dprintk("Desktop voltage regulator\n");
+ pr_debug("Desktop voltage regulator\n");
latency = psb->settlingtime;
if (latency < 100) {
@@ -497,9 +492,9 @@
"Correcting.\n", latency);
latency = 100;
}
- dprintk("Settling Time: %d microseconds.\n",
+ pr_debug("Settling Time: %d microseconds.\n",
psb->settlingtime);
- dprintk("Has %d PST tables. (Only dumping ones "
+ pr_debug("Has %d PST tables. (Only dumping ones "
"relevant to this CPU).\n",
psb->numpst);
@@ -650,7 +645,7 @@
printk(KERN_WARNING PFX "can not determine bus frequency\n");
return -EINVAL;
}
- dprintk("FSB: %3dMHz\n", fsb/1000);
+ pr_debug("FSB: %3dMHz\n", fsb/1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
printk(KERN_INFO PFX "PSB/PST known to be broken. "
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/drivers/cpufreq/powernow-k7.h
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/powernow-k7.h
rename to drivers/cpufreq/powernow-k7.h
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
similarity index 93%
rename from arch/x86/kernel/cpu/cpufreq/powernow-k8.c
rename to drivers/cpufreq/powernow-k8.c
index 2368e38..83479b6 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -139,7 +139,7 @@
}
do {
if (i++ > 10000) {
- dprintk("detected change pending stuck\n");
+ pr_debug("detected change pending stuck\n");
return 1;
}
rdmsr(MSR_FIDVID_STATUS, lo, hi);
@@ -176,7 +176,7 @@
fid = lo & MSR_S_LO_CURRENT_FID;
lo = fid | (vid << MSR_C_LO_VID_SHIFT);
hi = MSR_C_HI_STP_GNT_BENIGN;
- dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+ pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
wrmsr(MSR_FIDVID_CTL, lo, hi);
}
@@ -196,7 +196,7 @@
lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
lo |= MSR_C_LO_INIT_FID_VID;
- dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+ pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
fid, lo, data->plllock * PLL_LOCK_CONVERSION);
do {
@@ -244,7 +244,7 @@
lo |= (vid << MSR_C_LO_VID_SHIFT);
lo |= MSR_C_LO_INIT_FID_VID;
- dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+ pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
vid, lo, STOP_GRANT_5NS);
do {
@@ -325,7 +325,7 @@
return 1;
}
- dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+ pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
smp_processor_id(), data->currfid, data->currvid);
return 0;
@@ -339,7 +339,7 @@
u32 savefid = data->currfid;
u32 maxvid, lo, rvomult = 1;
- dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
+ pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
"reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
@@ -349,12 +349,12 @@
rvosteps *= rvomult;
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
- dprintk("ph1 maxvid=0x%x\n", maxvid);
+ pr_debug("ph1 maxvid=0x%x\n", maxvid);
if (reqvid < maxvid) /* lower numbers are higher voltages */
reqvid = maxvid;
while (data->currvid > reqvid) {
- dprintk("ph1: curr 0x%x, req vid 0x%x\n",
+ pr_debug("ph1: curr 0x%x, req vid 0x%x\n",
data->currvid, reqvid);
if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
return 1;
@@ -365,7 +365,7 @@
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
- dprintk("ph1: changing vid for rvo, req 0x%x\n",
+ pr_debug("ph1: changing vid for rvo, req 0x%x\n",
data->currvid - 1);
if (decrease_vid_code_by_step(data, data->currvid-1, 1))
return 1;
@@ -382,7 +382,7 @@
return 1;
}
- dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+ pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n",
data->currfid, data->currvid);
return 0;
@@ -400,7 +400,7 @@
return 0;
}
- dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
+ pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
"reqfid 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqfid);
@@ -457,7 +457,7 @@
return 1;
}
- dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+ pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n",
data->currfid, data->currvid);
return 0;
@@ -470,7 +470,7 @@
u32 savefid = data->currfid;
u32 savereqvid = reqvid;
- dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+ pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid);
@@ -498,17 +498,17 @@
return 1;
if (savereqvid != data->currvid) {
- dprintk("ph3 failed, currvid 0x%x\n", data->currvid);
+ pr_debug("ph3 failed, currvid 0x%x\n", data->currvid);
return 1;
}
if (savefid != data->currfid) {
- dprintk("ph3 failed, currfid changed 0x%x\n",
+ pr_debug("ph3 failed, currfid changed 0x%x\n",
data->currfid);
return 1;
}
- dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+ pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n",
data->currfid, data->currvid);
return 0;
@@ -707,7 +707,7 @@
return -EIO;
}
- dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+ pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
data->powernow_table = powernow_table;
if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
print_basics(data);
@@ -717,7 +717,7 @@
(pst[j].vid == data->currvid))
return 0;
- dprintk("currfid/vid do not match PST, ignoring\n");
+ pr_debug("currfid/vid do not match PST, ignoring\n");
return 0;
}
@@ -739,36 +739,36 @@
if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
continue;
- dprintk("found PSB header at 0x%p\n", psb);
+ pr_debug("found PSB header at 0x%p\n", psb);
- dprintk("table vers: 0x%x\n", psb->tableversion);
+ pr_debug("table vers: 0x%x\n", psb->tableversion);
if (psb->tableversion != PSB_VERSION_1_4) {
printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
return -ENODEV;
}
- dprintk("flags: 0x%x\n", psb->flags1);
+ pr_debug("flags: 0x%x\n", psb->flags1);
if (psb->flags1) {
printk(KERN_ERR FW_BUG PFX "unknown flags\n");
return -ENODEV;
}
data->vstable = psb->vstable;
- dprintk("voltage stabilization time: %d(*20us)\n",
+ pr_debug("voltage stabilization time: %d(*20us)\n",
data->vstable);
- dprintk("flags2: 0x%x\n", psb->flags2);
+ pr_debug("flags2: 0x%x\n", psb->flags2);
data->rvo = psb->flags2 & 3;
data->irt = ((psb->flags2) >> 2) & 3;
mvs = ((psb->flags2) >> 4) & 3;
data->vidmvs = 1 << mvs;
data->batps = ((psb->flags2) >> 6) & 3;
- dprintk("ramp voltage offset: %d\n", data->rvo);
- dprintk("isochronous relief time: %d\n", data->irt);
- dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+ pr_debug("ramp voltage offset: %d\n", data->rvo);
+ pr_debug("isochronous relief time: %d\n", data->irt);
+ pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
- dprintk("numpst: 0x%x\n", psb->num_tables);
+ pr_debug("numpst: 0x%x\n", psb->num_tables);
cpst = psb->num_tables;
if ((psb->cpuid == 0x00000fc0) ||
(psb->cpuid == 0x00000fe0)) {
@@ -783,13 +783,13 @@
}
data->plllock = psb->plllocktime;
- dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
- dprintk("maxfid: 0x%x\n", psb->maxfid);
- dprintk("maxvid: 0x%x\n", psb->maxvid);
+ pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+ pr_debug("maxfid: 0x%x\n", psb->maxfid);
+ pr_debug("maxvid: 0x%x\n", psb->maxvid);
maxvid = psb->maxvid;
data->numps = psb->numps;
- dprintk("numpstates: 0x%x\n", data->numps);
+ pr_debug("numpstates: 0x%x\n", data->numps);
return fill_powernow_table(data,
(struct pst_s *)(psb+1), maxvid);
}
@@ -834,13 +834,13 @@
u64 control, status;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
- dprintk("register performance failed: bad ACPI data\n");
+ pr_debug("register performance failed: bad ACPI data\n");
return -EIO;
}
/* verify the data contained in the ACPI structures */
if (data->acpi_data.state_count <= 1) {
- dprintk("No ACPI P-States\n");
+ pr_debug("No ACPI P-States\n");
goto err_out;
}
@@ -849,7 +849,7 @@
if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
(status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
- dprintk("Invalid control/status registers (%x - %x)\n",
+ pr_debug("Invalid control/status registers (%llx - %llx)\n",
control, status);
goto err_out;
}
@@ -858,7 +858,7 @@
powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
* (data->acpi_data.state_count + 1)), GFP_KERNEL);
if (!powernow_table) {
- dprintk("powernow_table memory alloc failure\n");
+ pr_debug("powernow_table memory alloc failure\n");
goto err_out;
}
@@ -928,7 +928,7 @@
}
rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
if (!(hi & HW_PSTATE_VALID_MASK)) {
- dprintk("invalid pstate %d, ignoring\n", index);
+ pr_debug("invalid pstate %d, ignoring\n", index);
invalidate_entry(powernow_table, i);
continue;
}
@@ -968,7 +968,7 @@
vid = (control >> VID_SHIFT) & VID_MASK;
}
- dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+ pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
index = fid | (vid<<8);
powernow_table[i].index = index;
@@ -978,7 +978,7 @@
/* verify frequency is OK */
if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
- dprintk("invalid freq %u kHz, ignoring\n", freq);
+ pr_debug("invalid freq %u kHz, ignoring\n", freq);
invalidate_entry(powernow_table, i);
continue;
}
@@ -986,7 +986,7 @@
/* verify voltage is OK -
* BIOSs are using "off" to indicate invalid */
if (vid == VID_OFF) {
- dprintk("invalid vid %u, ignoring\n", vid);
+ pr_debug("invalid vid %u, ignoring\n", vid);
invalidate_entry(powernow_table, i);
continue;
}
@@ -1047,7 +1047,7 @@
int res, i;
struct cpufreq_freqs freqs;
- dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+ pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
/* fid/vid correctness check for k8 */
/* fid are the lower 8 bits of the index we stored into
@@ -1057,18 +1057,18 @@
fid = data->powernow_table[index].index & 0xFF;
vid = (data->powernow_table[index].index & 0xFF00) >> 8;
- dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+ pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
if (query_current_values_with_pending_wait(data))
return 1;
if ((data->currvid == vid) && (data->currfid == fid)) {
- dprintk("target matches current values (fid 0x%x, vid 0x%x)\n",
+ pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n",
fid, vid);
return 0;
}
- dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+ pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
@@ -1096,7 +1096,7 @@
int res, i;
struct cpufreq_freqs freqs;
- dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+ pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
/* get MSR index for hardware pstate transition */
pstate = index & HW_PSTATE_MASK;
@@ -1156,14 +1156,14 @@
goto err_out;
}
- dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
+ pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
pol->cpu, targfreq, pol->min, pol->max, relation);
if (query_current_values_with_pending_wait(data))
goto err_out;
if (cpu_family != CPU_HW_PSTATE) {
- dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+ pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
if ((checkvid != data->currvid) ||
@@ -1319,7 +1319,7 @@
data->currpstate);
else
pol->cur = find_khz_freq_from_fid(data->currfid);
- dprintk("policy current frequency %d kHz\n", pol->cur);
+ pr_debug("policy current frequency %d kHz\n", pol->cur);
/* min/max the cpu is capable of */
if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
@@ -1337,10 +1337,10 @@
cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
if (cpu_family == CPU_HW_PSTATE)
- dprintk("cpu_init done, current pstate 0x%x\n",
+ pr_debug("cpu_init done, current pstate 0x%x\n",
data->currpstate);
else
- dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+ pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
per_cpu(powernow_data, pol->cpu) = data;
@@ -1586,7 +1586,7 @@
/* driver entry point for term */
static void __exit powernowk8_exit(void)
{
- dprintk("exit\n");
+ pr_debug("exit\n");
if (boot_cpu_has(X86_FEATURE_CPB)) {
msrs_free(msrs);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h
similarity index 98%
rename from arch/x86/kernel/cpu/cpufreq/powernow-k8.h
rename to drivers/cpufreq/powernow-k8.h
index df3529b..3744d26 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/drivers/cpufreq/powernow-k8.h
@@ -211,8 +211,6 @@
u8 vid;
};
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
-
static int core_voltage_pre_transition(struct powernow_k8_data *data,
u32 reqvid, u32 regfid);
static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
similarity index 95%
rename from arch/x86/kernel/cpu/cpufreq/sc520_freq.c
rename to drivers/cpufreq/sc520_freq.c
index 435a996..1e205e6 100644
--- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
+++ b/drivers/cpufreq/sc520_freq.c
@@ -29,8 +29,6 @@
static __u8 __iomem *cpuctl;
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "sc520_freq", msg)
#define PFX "sc520_freq: "
static struct cpufreq_frequency_table sc520_freq_table[] = {
@@ -66,7 +64,7 @@
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- dprintk("attempting to set frequency to %i kHz\n",
+ pr_debug("attempting to set frequency to %i kHz\n",
sc520_freq_table[state].frequency);
local_irq_disable();
@@ -161,7 +159,7 @@
/* Test if we have the right hardware */
if (c->x86_vendor != X86_VENDOR_AMD ||
c->x86 != 4 || c->x86_model != 9) {
- dprintk("no Elan SC520 processor found!\n");
+ pr_debug("no Elan SC520 processor found!\n");
return -ENODEV;
}
cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
similarity index 95%
rename from arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
rename to drivers/cpufreq/speedstep-centrino.c
index 9b1ff37..6ea3455 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -29,9 +29,6 @@
#define PFX "speedstep-centrino: "
#define MAINTAINER "cpufreq@vger.kernel.org"
-#define dprintk(msg...) \
- cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
-
#define INTEL_MSR_RANGE (0xffff)
struct cpu_id
@@ -244,7 +241,7 @@
if (model->cpu_id == NULL) {
/* No match at all */
- dprintk("no support for CPU model \"%s\": "
+ pr_debug("no support for CPU model \"%s\": "
"send /proc/cpuinfo to " MAINTAINER "\n",
cpu->x86_model_id);
return -ENOENT;
@@ -252,15 +249,15 @@
if (model->op_points == NULL) {
/* Matched a non-match */
- dprintk("no table support for CPU model \"%s\"\n",
+ pr_debug("no table support for CPU model \"%s\"\n",
cpu->x86_model_id);
- dprintk("try using the acpi-cpufreq driver\n");
+ pr_debug("try using the acpi-cpufreq driver\n");
return -ENOENT;
}
per_cpu(centrino_model, policy->cpu) = model;
- dprintk("found \"%s\": max frequency: %dkHz\n",
+ pr_debug("found \"%s\": max frequency: %dkHz\n",
model->model_name, model->max_freq);
return 0;
@@ -369,7 +366,7 @@
per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
if (!per_cpu(centrino_cpu, policy->cpu)) {
- dprintk("found unsupported CPU with "
+ pr_debug("found unsupported CPU with "
"Enhanced SpeedStep: send /proc/cpuinfo to "
MAINTAINER "\n");
return -ENODEV;
@@ -385,7 +382,7 @@
if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
- dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
+ pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
wrmsr(MSR_IA32_MISC_ENABLE, l, h);
/* check to see if it stuck */
@@ -402,7 +399,7 @@
/* 10uS transition latency */
policy->cur = freq;
- dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
+ pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
ret = cpufreq_frequency_table_cpuinfo(policy,
per_cpu(centrino_model, policy->cpu)->op_points);
@@ -498,7 +495,7 @@
good_cpu = j;
if (good_cpu >= nr_cpu_ids) {
- dprintk("couldn't limit to CPUs in this domain\n");
+ pr_debug("couldn't limit to CPUs in this domain\n");
retval = -EAGAIN;
if (first_cpu) {
/* We haven't started the transition yet. */
@@ -512,7 +509,7 @@
if (first_cpu) {
rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
if (msr == (oldmsr & 0xffff)) {
- dprintk("no change needed - msr was and needs "
+ pr_debug("no change needed - msr was and needs "
"to be %x\n", oldmsr);
retval = 0;
goto out;
@@ -521,7 +518,7 @@
freqs.old = extract_clock(oldmsr, cpu, 0);
freqs.new = extract_clock(msr, cpu, 0);
- dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
+ pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
target_freq, freqs.old, freqs.new, msr);
for_each_cpu(k, policy->cpus) {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
similarity index 92%
rename from arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
rename to drivers/cpufreq/speedstep-ich.c
index 561758e..a748ce7 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -53,10 +53,6 @@
};
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "speedstep-ich", msg)
-
-
/**
* speedstep_find_register - read the PMBASE address
*
@@ -80,7 +76,7 @@
return -ENODEV;
}
- dprintk("pmbase is 0x%x\n", pmbase);
+ pr_debug("pmbase is 0x%x\n", pmbase);
return 0;
}
@@ -106,13 +102,13 @@
/* read state */
value = inb(pmbase + 0x50);
- dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+ pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
/* write new state */
value &= 0xFE;
value |= state;
- dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+ pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
/* Disable bus master arbitration */
pm2_blk = inb(pmbase + 0x20);
@@ -132,10 +128,10 @@
/* Enable IRQs */
local_irq_restore(flags);
- dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+ pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
if (state == (value & 0x1))
- dprintk("change to %u MHz succeeded\n",
+ pr_debug("change to %u MHz succeeded\n",
speedstep_get_frequency(speedstep_processor) / 1000);
else
printk(KERN_ERR "cpufreq: change failed - I/O error\n");
@@ -165,7 +161,7 @@
pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
if (!(value & 0x08)) {
value |= 0x08;
- dprintk("activating SpeedStep (TM) registers\n");
+ pr_debug("activating SpeedStep (TM) registers\n");
pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
}
@@ -218,7 +214,7 @@
return 2; /* 2-M */
if (hostbridge->revision < 5) {
- dprintk("hostbridge does not support speedstep\n");
+ pr_debug("hostbridge does not support speedstep\n");
speedstep_chipset_dev = NULL;
pci_dev_put(hostbridge);
return 0;
@@ -246,7 +242,7 @@
if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
BUG();
- dprintk("detected %u kHz as current frequency\n", speed);
+ pr_debug("detected %u kHz as current frequency\n", speed);
return speed;
}
@@ -276,7 +272,7 @@
freqs.new = speedstep_freqs[newstate].frequency;
freqs.cpu = policy->cpu;
- dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new);
+ pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
/* no transition necessary */
if (freqs.old == freqs.new)
@@ -351,7 +347,7 @@
if (!speed)
return -EIO;
- dprintk("currently at %s speed setting - %i MHz\n",
+ pr_debug("currently at %s speed setting - %i MHz\n",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
? "low" : "high",
(speed / 1000));
@@ -405,14 +401,14 @@
/* detect processor */
speedstep_processor = speedstep_detect_processor();
if (!speedstep_processor) {
- dprintk("Intel(R) SpeedStep(TM) capable processor "
+ pr_debug("Intel(R) SpeedStep(TM) capable processor "
"not found\n");
return -ENODEV;
}
/* detect chipset */
if (!speedstep_detect_chipset()) {
- dprintk("Intel(R) SpeedStep(TM) for this chipset not "
+ pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
"(yet) available.\n");
return -ENODEV;
}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
similarity index 89%
rename from arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
rename to drivers/cpufreq/speedstep-lib.c
index a94ec6b..8af2d2f 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -18,9 +18,6 @@
#include <asm/tsc.h>
#include "speedstep-lib.h"
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "speedstep-lib", msg)
-
#define PFX "speedstep-lib: "
#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
@@ -75,7 +72,7 @@
/* read MSR 0x2a - we only need the low 32 bits */
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
- dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+ pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
msr_tmp = msr_lo;
/* decode the FSB */
@@ -89,7 +86,7 @@
/* decode the multiplier */
if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
- dprintk("workaround for early PIIIs\n");
+ pr_debug("workaround for early PIIIs\n");
msr_lo &= 0x03c00000;
} else
msr_lo &= 0x0bc00000;
@@ -100,7 +97,7 @@
j++;
}
- dprintk("speed is %u\n",
+ pr_debug("speed is %u\n",
(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
@@ -112,7 +109,7 @@
u32 msr_lo, msr_tmp;
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
- dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+ pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
/* see table B-2 of 24547212.pdf */
if (msr_lo & 0x00040000) {
@@ -122,7 +119,7 @@
}
msr_tmp = (msr_lo >> 22) & 0x1f;
- dprintk("bits 22-26 are 0x%x, speed is %u\n",
+ pr_debug("bits 22-26 are 0x%x, speed is %u\n",
msr_tmp, (msr_tmp * 100 * 1000));
return msr_tmp * 100 * 1000;
@@ -160,11 +157,11 @@
}
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
- dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+ pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
msr_lo, msr_tmp);
msr_tmp = (msr_lo >> 22) & 0x1f;
- dprintk("bits 22-26 are 0x%x, speed is %u\n",
+ pr_debug("bits 22-26 are 0x%x, speed is %u\n",
msr_tmp, (msr_tmp * fsb));
ret = (msr_tmp * fsb);
@@ -190,7 +187,7 @@
rdmsr(0x2c, msr_lo, msr_hi);
- dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+ pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
/* decode the FSB: see IA-32 Intel (C) Architecture Software
* Developer's Manual, Volume 3: System Prgramming Guide,
@@ -217,7 +214,7 @@
/* Multiplier. */
mult = msr_lo >> 24;
- dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+ pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
fsb, mult, (fsb * mult));
ret = (fsb * mult);
@@ -257,7 +254,7 @@
struct cpuinfo_x86 *c = &cpu_data(0);
u32 ebx, msr_lo, msr_hi;
- dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
+ pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
((c->x86 != 6) && (c->x86 != 0xF)))
@@ -272,7 +269,7 @@
ebx = cpuid_ebx(0x00000001);
ebx &= 0x000000FF;
- dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+ pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
switch (c->x86_mask) {
case 4:
@@ -327,7 +324,7 @@
/* cpuid_ebx(1) is 0x04 for desktop PIII,
* 0x06 for mobile PIII-M */
ebx = cpuid_ebx(0x00000001);
- dprintk("ebx is %x\n", ebx);
+ pr_debug("ebx is %x\n", ebx);
ebx &= 0x000000FF;
@@ -344,7 +341,7 @@
/* all mobile PIII Coppermines have FSB 100 MHz
* ==> sort out a few desktop PIIIs. */
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
- dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+ pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
msr_lo, msr_hi);
msr_lo &= 0x00c0000;
if (msr_lo != 0x0080000)
@@ -357,12 +354,12 @@
* bit 56 or 57 is set
*/
rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
- dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+ pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
msr_lo, msr_hi);
if ((msr_hi & (1<<18)) &&
(relaxed_check ? 1 : (msr_hi & (3<<24)))) {
if (c->x86_mask == 0x01) {
- dprintk("early PIII version\n");
+ pr_debug("early PIII version\n");
return SPEEDSTEP_CPU_PIII_C_EARLY;
} else
return SPEEDSTEP_CPU_PIII_C;
@@ -393,14 +390,14 @@
if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
return -EINVAL;
- dprintk("trying to determine both speeds\n");
+ pr_debug("trying to determine both speeds\n");
/* get current speed */
prev_speed = speedstep_get_frequency(processor);
if (!prev_speed)
return -EIO;
- dprintk("previous speed is %u\n", prev_speed);
+ pr_debug("previous speed is %u\n", prev_speed);
local_irq_save(flags);
@@ -412,7 +409,7 @@
goto out;
}
- dprintk("low speed is %u\n", *low_speed);
+ pr_debug("low speed is %u\n", *low_speed);
/* start latency measurement */
if (transition_latency)
@@ -431,7 +428,7 @@
goto out;
}
- dprintk("high speed is %u\n", *high_speed);
+ pr_debug("high speed is %u\n", *high_speed);
if (*low_speed == *high_speed) {
ret = -ENODEV;
@@ -445,7 +442,7 @@
if (transition_latency) {
*transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
tv2.tv_usec - tv1.tv_usec;
- dprintk("transition latency is %u uSec\n", *transition_latency);
+ pr_debug("transition latency is %u uSec\n", *transition_latency);
/* convert uSec to nSec and add 20% for safety reasons */
*transition_latency *= 1200;
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/drivers/cpufreq/speedstep-lib.h
similarity index 100%
rename from arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
rename to drivers/cpufreq/speedstep-lib.h
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
similarity index 89%
rename from arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
rename to drivers/cpufreq/speedstep-smi.c
index 91bc25b..c76ead3 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -55,9 +55,6 @@
* of DMA activity going on? */
#define SMI_TRIES 5
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
- "speedstep-smi", msg)
-
/**
* speedstep_smi_ownership
*/
@@ -70,7 +67,7 @@
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
magic = virt_to_phys(magic_data);
- dprintk("trying to obtain ownership with command %x at port %x\n",
+ pr_debug("trying to obtain ownership with command %x at port %x\n",
command, smi_port);
__asm__ __volatile__(
@@ -85,7 +82,7 @@
: "memory"
);
- dprintk("result is %x\n", result);
+ pr_debug("result is %x\n", result);
return result;
}
@@ -106,13 +103,13 @@
u32 function = GET_SPEEDSTEP_FREQS;
if (!(ist_info.event & 0xFFFF)) {
- dprintk("bug #1422 -- can't read freqs from BIOS\n");
+ pr_debug("bug #1422 -- can't read freqs from BIOS\n");
return -ENODEV;
}
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
- dprintk("trying to determine frequencies with command %x at port %x\n",
+ pr_debug("trying to determine frequencies with command %x at port %x\n",
command, smi_port);
__asm__ __volatile__(
@@ -129,7 +126,7 @@
"d" (smi_port), "S" (0), "D" (0)
);
- dprintk("result %x, low_freq %u, high_freq %u\n",
+ pr_debug("result %x, low_freq %u, high_freq %u\n",
result, low_mhz, high_mhz);
/* abort if results are obviously incorrect... */
@@ -154,7 +151,7 @@
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
- dprintk("trying to determine current setting with command %x "
+ pr_debug("trying to determine current setting with command %x "
"at port %x\n", command, smi_port);
__asm__ __volatile__(
@@ -168,7 +165,7 @@
"d" (smi_port), "S" (0), "D" (0)
);
- dprintk("state is %x, result is %x\n", state, result);
+ pr_debug("state is %x, result is %x\n", state, result);
return state & 1;
}
@@ -194,13 +191,13 @@
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
- dprintk("trying to set frequency to state %u "
+ pr_debug("trying to set frequency to state %u "
"with command %x at port %x\n",
state, command, smi_port);
do {
if (retry) {
- dprintk("retry %u, previous result %u, waiting...\n",
+ pr_debug("retry %u, previous result %u, waiting...\n",
retry, result);
mdelay(retry * 50);
}
@@ -221,7 +218,7 @@
local_irq_restore(flags);
if (new_state == state)
- dprintk("change to %u MHz succeeded after %u tries "
+ pr_debug("change to %u MHz succeeded after %u tries "
"with result %u\n",
(speedstep_freqs[new_state].frequency / 1000),
retry, result);
@@ -292,7 +289,7 @@
result = speedstep_smi_ownership();
if (result) {
- dprintk("fails in acquiring ownership of a SMI interface.\n");
+ pr_debug("fails in acquiring ownership of a SMI interface.\n");
return -EINVAL;
}
@@ -304,7 +301,7 @@
if (result) {
/* fall back to speedstep_lib.c dection mechanism:
* try both states out */
- dprintk("could not detect low and high frequencies "
+ pr_debug("could not detect low and high frequencies "
"by SMI call.\n");
result = speedstep_get_freqs(speedstep_processor,
low, high,
@@ -312,18 +309,18 @@
&speedstep_set_state);
if (result) {
- dprintk("could not detect two different speeds"
+ pr_debug("could not detect two different speeds"
" -- aborting.\n");
return result;
} else
- dprintk("workaround worked.\n");
+ pr_debug("workaround worked.\n");
}
/* get current speed setting */
state = speedstep_get_state();
speed = speedstep_freqs[state].frequency;
- dprintk("currently at %s speed setting - %i MHz\n",
+ pr_debug("currently at %s speed setting - %i MHz\n",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
? "low" : "high",
(speed / 1000));
@@ -360,7 +357,7 @@
int result = speedstep_smi_ownership();
if (result)
- dprintk("fails in re-acquiring ownership of a SMI interface.\n");
+ pr_debug("fails in re-acquiring ownership of a SMI interface.\n");
return result;
}
@@ -403,12 +400,12 @@
}
if (!speedstep_processor) {
- dprintk("No supported Intel CPU detected.\n");
+ pr_debug("No supported Intel CPU detected.\n");
return -ENODEV;
}
- dprintk("signature:0x%.8lx, command:0x%.8lx, "
- "event:0x%.8lx, perf_level:0x%.8lx.\n",
+ pr_debug("signature:0x%.8ulx, command:0x%.8ulx, "
+ "event:0x%.8ulx, perf_level:0x%.8ulx.\n",
ist_info.signature, ist_info.command,
ist_info.event, ist_info.perf_level);
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index e541852..c64c380 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -91,6 +91,8 @@
This is the s390 hardware accelerated implementation of the
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+ It is available as of z990.
+
config CRYPTO_SHA256_S390
tristate "SHA256 digest algorithm"
depends on S390
@@ -99,8 +101,7 @@
This is the s390 hardware accelerated implementation of the
SHA256 secure hash standard (DFIPS 180-2).
- This version of SHA implements a 256 bit hash with 128 bits of
- security against collision attacks.
+ It is available as of z9.
config CRYPTO_SHA512_S390
tristate "SHA384 and SHA512 digest algorithm"
@@ -110,10 +111,7 @@
This is the s390 hardware accelerated implementation of the
SHA512 secure hash standard.
- This version of SHA implements a 512 bit hash with 256 bits of
- security against collision attacks. The code also includes SHA-384,
- a 384 bit hash with 192 bits of security against collision attacks.
-
+ It is available as of z10.
config CRYPTO_DES_S390
tristate "DES and Triple DES cipher algorithms"
@@ -121,9 +119,12 @@
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
- This us the s390 hardware accelerated implementation of the
+ This is the s390 hardware accelerated implementation of the
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+ As of z990 the ECB and CBC mode are hardware accelerated.
+ As of z196 the CTR mode is hardware accelerated.
+
config CRYPTO_AES_S390
tristate "AES cipher algorithms"
depends on S390
@@ -131,20 +132,15 @@
select CRYPTO_BLKCIPHER
help
This is the s390 hardware accelerated implementation of the
- AES cipher algorithms (FIPS-197). AES uses the Rijndael
- algorithm.
+ AES cipher algorithms (FIPS-197).
- Rijndael appears to be consistently a very good performer in
- both hardware and software across a wide range of computing
- environments regardless of its use in feedback or non-feedback
- modes. Its key setup time is excellent, and its key agility is
- good. Rijndael's very low memory requirements make it very well
- suited for restricted-space environments, in which it also
- demonstrates excellent performance. Rijndael's operations are
- among the easiest to defend against power and timing attacks.
-
- On s390 the System z9-109 currently only supports the key size
- of 128 bit.
+ As of z9 the ECB and CBC modes are hardware accelerated
+ for 128 bit keys.
+ As of z10 the ECB and CBC modes are hardware accelerated
+ for all AES key sizes.
+ As of z196 the CTR mode is hardware accelerated for all AES
+ key sizes and XTS mode is hardware accelerated for 256 and
+ 512 bit keys.
config S390_PRNG
tristate "Pseudo random number generator device driver"
@@ -154,8 +150,20 @@
Select this option if you want to use the s390 pseudo random number
generator. The PRNG is part of the cryptographic processor functions
and uses triple-DES to generate secure random numbers like the
- ANSI X9.17 standard. The PRNG is usable via the char device
- /dev/prandom.
+ ANSI X9.17 standard. User-space programs access the
+ pseudo-random-number device through the char device /dev/prandom.
+
+ It is available as of z9.
+
+config CRYPTO_GHASH_S390
+ tristate "GHASH digest algorithm"
+ depends on S390
+ select CRYPTO_HASH
+ help
+ This is the s390 hardware accelerated implementation of the
+ GHASH message digest algorithm for GCM (Galois/Counter Mode).
+
+ It is available as of z196.
config CRYPTO_DEV_MV_CESA
tristate "Marvell's Cryptographic Engine"
@@ -200,6 +208,8 @@
Select this option if you want to enable the random number generator
on the HIFN 795x crypto adapters.
+source drivers/crypto/caam/Kconfig
+
config CRYPTO_DEV_TALITOS
tristate "Talitos Freescale Security Engine (SEC)"
select CRYPTO_ALGAPI
@@ -269,4 +279,15 @@
Saying m here will build a module named pipcoxcell_crypto.
+config CRYPTO_DEV_S5P
+ tristate "Support for Samsung S5PV210 crypto accelerator"
+ depends on ARCH_S5PV210
+ select CRYPTO_AES
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLKCIPHER
+ help
+ This option allows you to have support for S5P crypto acceleration.
+ Select this to offload Samsung S5PV210 or S5PC110 from AES
+ algorithms execution.
+
endif # CRYPTO_HW
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 5203e34..53ea501 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -6,8 +6,10 @@
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam/
obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
obj-$(CONFIG_CRYPTO_DEV_OMAP_SHAM) += omap-sham.o
obj-$(CONFIG_CRYPTO_DEV_OMAP_AES) += omap-aes.o
obj-$(CONFIG_CRYPTO_DEV_PICOXCELL) += picoxcell_crypto.o
+obj-$(CONFIG_CRYPTO_DEV_S5P) += s5p-sss.o
diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
new file mode 100644
index 0000000..2d876bb
--- /dev/null
+++ b/drivers/crypto/caam/Kconfig
@@ -0,0 +1,72 @@
+config CRYPTO_DEV_FSL_CAAM
+ tristate "Freescale CAAM-Multicore driver backend"
+ depends on FSL_SOC
+ help
+ Enables the driver module for Freescale's Cryptographic Accelerator
+ and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
+ This module adds a job ring operation interface, and configures h/w
+ to operate as a DPAA component automatically, depending
+ on h/w feature availability.
+
+ To compile this driver as a module, choose M here: the module
+ will be called caam.
+
+config CRYPTO_DEV_FSL_CAAM_RINGSIZE
+ int "Job Ring size"
+ depends on CRYPTO_DEV_FSL_CAAM
+ range 2 9
+ default "9"
+ help
+ Select size of Job Rings as a power of 2, within the
+ range 2-9 (ring size 4-512).
+ Examples:
+ 2 => 4
+ 3 => 8
+ 4 => 16
+ 5 => 32
+ 6 => 64
+ 7 => 128
+ 8 => 256
+ 9 => 512
+
+config CRYPTO_DEV_FSL_CAAM_INTC
+ bool "Job Ring interrupt coalescing"
+ depends on CRYPTO_DEV_FSL_CAAM
+ default y
+ help
+ Enable the Job Ring's interrupt coalescing feature.
+
+config CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD
+ int "Job Ring interrupt coalescing count threshold"
+ depends on CRYPTO_DEV_FSL_CAAM_INTC
+ range 1 255
+ default 255
+ help
+ Select number of descriptor completions to queue before
+ raising an interrupt, in the range 1-255. Note that a selection
+ of 1 functionally defeats the coalescing feature, and a selection
+ equal or greater than the job ring size will force timeouts.
+
+config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
+ int "Job Ring interrupt coalescing timer threshold"
+ depends on CRYPTO_DEV_FSL_CAAM_INTC
+ range 1 65535
+ default 2048
+ help
+ Select number of bus clocks/64 to timeout in the case that one or
+ more descriptor completions are queued without reaching the count
+ threshold. Range is 1-65535.
+
+config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
+ tristate "Register algorithm implementations with the Crypto API"
+ depends on CRYPTO_DEV_FSL_CAAM
+ default y
+ select CRYPTO_ALGAPI
+ select CRYPTO_AUTHENC
+ help
+ Selecting this will offload crypto for users of the
+ scatterlist crypto API (such as the linux native IPSec
+ stack) to the SEC4 via job ring.
+
+ To compile this as a module, choose M here: the module
+ will be called caamalg.
diff --git a/drivers/crypto/caam/Makefile b/drivers/crypto/caam/Makefile
new file mode 100644
index 0000000..ef39011
--- /dev/null
+++ b/drivers/crypto/caam/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the CAAM backend and dependent components
+#
+
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
+
+caam-objs := ctrl.o jr.o error.o
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
new file mode 100644
index 0000000..d0e65d6
--- /dev/null
+++ b/drivers/crypto/caam/caamalg.c
@@ -0,0 +1,1268 @@
+/*
+ * caam - Freescale FSL CAAM support for crypto API
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * Based on talitos crypto API driver.
+ *
+ * relationship of job descriptors to shared descriptors (SteveC Dec 10 2008):
+ *
+ * --------------- ---------------
+ * | JobDesc #1 |-------------------->| ShareDesc |
+ * | *(packet 1) | | (PDB) |
+ * --------------- |------------->| (hashKey) |
+ * . | | (cipherKey) |
+ * . | |-------->| (operation) |
+ * --------------- | | ---------------
+ * | JobDesc #2 |------| |
+ * | *(packet 2) | |
+ * --------------- |
+ * . |
+ * . |
+ * --------------- |
+ * | JobDesc #3 |------------
+ * | *(packet 3) |
+ * ---------------
+ *
+ * The SharedDesc never changes for a connection unless rekeyed, but
+ * each packet will likely be in a different place. So all we need
+ * to know to process the packet is where the input is, where the
+ * output goes, and what context we want to process with. Context is
+ * in the SharedDesc, packet references in the JobDesc.
+ *
+ * So, a job desc looks like:
+ *
+ * ---------------------
+ * | Header |
+ * | ShareDesc Pointer |
+ * | SEQ_OUT_PTR |
+ * | (output buffer) |
+ * | SEQ_IN_PTR |
+ * | (input buffer) |
+ * | LOAD (to DECO) |
+ * ---------------------
+ */
+
+#include "compat.h"
+
+#include "regs.h"
+#include "intern.h"
+#include "desc_constr.h"
+#include "jr.h"
+#include "error.h"
+
+/*
+ * crypto alg
+ */
+#define CAAM_CRA_PRIORITY 3000
+/* max key is sum of AES_MAX_KEY_SIZE, max split key size */
+#define CAAM_MAX_KEY_SIZE (AES_MAX_KEY_SIZE + \
+ SHA512_DIGEST_SIZE * 2)
+/* max IV is max of AES_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE */
+#define CAAM_MAX_IV_LENGTH 16
+
+/* length of descriptors text */
+#define DESC_AEAD_SHARED_TEXT_LEN 4
+#define DESC_AEAD_ENCRYPT_TEXT_LEN 21
+#define DESC_AEAD_DECRYPT_TEXT_LEN 24
+#define DESC_AEAD_GIVENCRYPT_TEXT_LEN 27
+
+#ifdef DEBUG
+/* for print_hex_dumps with line references */
+#define xstr(s) str(s)
+#define str(s) #s
+#define debug(format, arg...) printk(format, arg)
+#else
+#define debug(format, arg...)
+#endif
+
+/*
+ * per-session context
+ */
+struct caam_ctx {
+ struct device *jrdev;
+ u32 *sh_desc;
+ dma_addr_t shared_desc_phys;
+ u32 class1_alg_type;
+ u32 class2_alg_type;
+ u32 alg_op;
+ u8 *key;
+ dma_addr_t key_phys;
+ unsigned int enckeylen;
+ unsigned int split_key_len;
+ unsigned int split_key_pad_len;
+ unsigned int authsize;
+};
+
+static int aead_authenc_setauthsize(struct crypto_aead *authenc,
+ unsigned int authsize)
+{
+ struct caam_ctx *ctx = crypto_aead_ctx(authenc);
+
+ ctx->authsize = authsize;
+
+ return 0;
+}
+
+struct split_key_result {
+ struct completion completion;
+ int err;
+};
+
+static void split_key_done(struct device *dev, u32 *desc, u32 err,
+ void *context)
+{
+ struct split_key_result *res = context;
+
+#ifdef DEBUG
+ dev_err(dev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
+#endif
+ if (err) {
+ char tmp[CAAM_ERROR_STR_MAX];
+
+ dev_err(dev, "%08x: %s\n", err, caam_jr_strstatus(tmp, err));
+ }
+
+ res->err = err;
+
+ complete(&res->completion);
+}
+
+/*
+get a split ipad/opad key
+
+Split key generation-----------------------------------------------
+
+[00] 0xb0810008 jobdesc: stidx=1 share=never len=8
+[01] 0x04000014 key: class2->keyreg len=20
+ @0xffe01000
+[03] 0x84410014 operation: cls2-op sha1 hmac init dec
+[04] 0x24940000 fifold: class2 msgdata-last2 len=0 imm
+[05] 0xa4000001 jump: class2 local all ->1 [06]
+[06] 0x64260028 fifostr: class2 mdsplit-jdk len=40
+ @0xffe04000
+*/
+static u32 gen_split_key(struct caam_ctx *ctx, const u8 *key_in, u32 authkeylen)
+{
+ struct device *jrdev = ctx->jrdev;
+ u32 *desc;
+ struct split_key_result result;
+ dma_addr_t dma_addr_in, dma_addr_out;
+ int ret = 0;
+
+ desc = kmalloc(CAAM_CMD_SZ * 6 + CAAM_PTR_SZ * 2, GFP_KERNEL | GFP_DMA);
+
+ init_job_desc(desc, 0);
+
+ dma_addr_in = dma_map_single(jrdev, (void *)key_in, authkeylen,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(jrdev, dma_addr_in)) {
+ dev_err(jrdev, "unable to map key input memory\n");
+ kfree(desc);
+ return -ENOMEM;
+ }
+ append_key(desc, dma_addr_in, authkeylen, CLASS_2 |
+ KEY_DEST_CLASS_REG);
+
+ /* Sets MDHA up into an HMAC-INIT */
+ append_operation(desc, ctx->alg_op | OP_ALG_DECRYPT |
+ OP_ALG_AS_INIT);
+
+ /*
+ * do a FIFO_LOAD of zero, this will trigger the internal key expansion
+ into both pads inside MDHA
+ */
+ append_fifo_load_as_imm(desc, NULL, 0, LDST_CLASS_2_CCB |
+ FIFOLD_TYPE_MSG | FIFOLD_TYPE_LAST2);
+
+ /*
+ * FIFO_STORE with the explicit split-key content store
+ * (0x26 output type)
+ */
+ dma_addr_out = dma_map_single(jrdev, ctx->key, ctx->split_key_pad_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(jrdev, dma_addr_out)) {
+ dev_err(jrdev, "unable to map key output memory\n");
+ kfree(desc);
+ return -ENOMEM;
+ }
+ append_fifo_store(desc, dma_addr_out, ctx->split_key_len,
+ LDST_CLASS_2_CCB | FIFOST_TYPE_SPLIT_KEK);
+
+#ifdef DEBUG
+ print_hex_dump(KERN_ERR, "ctx.key@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, key_in, authkeylen, 1);
+ print_hex_dump(KERN_ERR, "jobdesc@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, desc, desc_bytes(desc), 1);
+#endif
+
+ result.err = 0;
+ init_completion(&result.completion);
+
+ ret = caam_jr_enqueue(jrdev, desc, split_key_done, &result);
+ if (!ret) {
+ /* in progress */
+ wait_for_completion_interruptible(&result.completion);
+ ret = result.err;
+#ifdef DEBUG
+ print_hex_dump(KERN_ERR, "ctx.key@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, ctx->key,
+ ctx->split_key_pad_len, 1);
+#endif
+ }
+
+ dma_unmap_single(jrdev, dma_addr_out, ctx->split_key_pad_len,
+ DMA_FROM_DEVICE);
+ dma_unmap_single(jrdev, dma_addr_in, authkeylen, DMA_TO_DEVICE);
+
+ kfree(desc);
+
+ return ret;
+}
+
+static int build_sh_desc_ipsec(struct caam_ctx *ctx)
+{
+ struct device *jrdev = ctx->jrdev;
+ u32 *sh_desc;
+ u32 *jump_cmd;
+ bool keys_fit_inline = 0;
+
+ /*
+ * largest Job Descriptor and its Shared Descriptor
+ * must both fit into the 64-word Descriptor h/w Buffer
+ */
+ if ((DESC_AEAD_GIVENCRYPT_TEXT_LEN +
+ DESC_AEAD_SHARED_TEXT_LEN) * CAAM_CMD_SZ +
+ ctx->split_key_pad_len + ctx->enckeylen <= CAAM_DESC_BYTES_MAX)
+ keys_fit_inline = 1;
+
+ /* build shared descriptor for this session */
+ sh_desc = kmalloc(CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN +
+ keys_fit_inline ?
+ ctx->split_key_pad_len + ctx->enckeylen :
+ CAAM_PTR_SZ * 2, GFP_DMA | GFP_KERNEL);
+ if (!sh_desc) {
+ dev_err(jrdev, "could not allocate shared descriptor\n");
+ return -ENOMEM;
+ }
+
+ init_sh_desc(sh_desc, HDR_SAVECTX | HDR_SHARE_SERIAL);
+
+ jump_cmd = append_jump(sh_desc, CLASS_BOTH | JUMP_TEST_ALL |
+ JUMP_COND_SHRD | JUMP_COND_SELF);
+
+ /*
+ * process keys, starting with class 2/authentication.
+ */
+ if (keys_fit_inline) {
+ append_key_as_imm(sh_desc, ctx->key, ctx->split_key_pad_len,
+ ctx->split_key_len,
+ CLASS_2 | KEY_DEST_MDHA_SPLIT | KEY_ENC);
+
+ append_key_as_imm(sh_desc, (void *)ctx->key +
+ ctx->split_key_pad_len, ctx->enckeylen,
+ ctx->enckeylen, CLASS_1 | KEY_DEST_CLASS_REG);
+ } else {
+ append_key(sh_desc, ctx->key_phys, ctx->split_key_len, CLASS_2 |
+ KEY_DEST_MDHA_SPLIT | KEY_ENC);
+ append_key(sh_desc, ctx->key_phys + ctx->split_key_pad_len,
+ ctx->enckeylen, CLASS_1 | KEY_DEST_CLASS_REG);
+ }
+
+ /* update jump cmd now that we are at the jump target */
+ set_jump_tgt_here(sh_desc, jump_cmd);
+
+ ctx->shared_desc_phys = dma_map_single(jrdev, sh_desc,
+ desc_bytes(sh_desc),
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(jrdev, ctx->shared_desc_phys)) {
+ dev_err(jrdev, "unable to map shared descriptor\n");
+ kfree(sh_desc);
+ return -ENOMEM;
+ }
+
+ ctx->sh_desc = sh_desc;
+
+ return 0;
+}
+
+static int aead_authenc_setkey(struct crypto_aead *aead,
+ const u8 *key, unsigned int keylen)
+{
+ /* Sizes for MDHA pads (*not* keys): MD5, SHA1, 224, 256, 384, 512 */
+ static const u8 mdpadlen[] = { 16, 20, 32, 32, 64, 64 };
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+ struct device *jrdev = ctx->jrdev;
+ struct rtattr *rta = (void *)key;
+ struct crypto_authenc_key_param *param;
+ unsigned int authkeylen;
+ unsigned int enckeylen;
+ int ret = 0;
+
+ param = RTA_DATA(rta);
+ enckeylen = be32_to_cpu(param->enckeylen);
+
+ key += RTA_ALIGN(rta->rta_len);
+ keylen -= RTA_ALIGN(rta->rta_len);
+
+ if (keylen < enckeylen)
+ goto badkey;
+
+ authkeylen = keylen - enckeylen;
+
+ if (keylen > CAAM_MAX_KEY_SIZE)
+ goto badkey;
+
+ /* Pick class 2 key length from algorithm submask */
+ ctx->split_key_len = mdpadlen[(ctx->alg_op & OP_ALG_ALGSEL_SUBMASK) >>
+ OP_ALG_ALGSEL_SHIFT] * 2;
+ ctx->split_key_pad_len = ALIGN(ctx->split_key_len, 16);
+
+#ifdef DEBUG
+ printk(KERN_ERR "keylen %d enckeylen %d authkeylen %d\n",
+ keylen, enckeylen, authkeylen);
+ printk(KERN_ERR "split_key_len %d split_key_pad_len %d\n",
+ ctx->split_key_len, ctx->split_key_pad_len);
+ print_hex_dump(KERN_ERR, "key in @"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1);
+#endif
+ ctx->key = kmalloc(ctx->split_key_pad_len + enckeylen,
+ GFP_KERNEL | GFP_DMA);
+ if (!ctx->key) {
+ dev_err(jrdev, "could not allocate key output memory\n");
+ return -ENOMEM;
+ }
+
+ ret = gen_split_key(ctx, key, authkeylen);
+ if (ret) {
+ kfree(ctx->key);
+ goto badkey;
+ }
+
+ /* postpend encryption key to auth split key */
+ memcpy(ctx->key + ctx->split_key_pad_len, key + authkeylen, enckeylen);
+
+ ctx->key_phys = dma_map_single(jrdev, ctx->key, ctx->split_key_pad_len +
+ enckeylen, DMA_TO_DEVICE);
+ if (dma_mapping_error(jrdev, ctx->key_phys)) {
+ dev_err(jrdev, "unable to map key i/o memory\n");
+ kfree(ctx->key);
+ return -ENOMEM;
+ }
+#ifdef DEBUG
+ print_hex_dump(KERN_ERR, "ctx.key@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, ctx->key,
+ ctx->split_key_pad_len + enckeylen, 1);
+#endif
+
+ ctx->enckeylen = enckeylen;
+
+ ret = build_sh_desc_ipsec(ctx);
+ if (ret) {
+ dma_unmap_single(jrdev, ctx->key_phys, ctx->split_key_pad_len +
+ enckeylen, DMA_TO_DEVICE);
+ kfree(ctx->key);
+ }
+
+ return ret;
+badkey:
+ crypto_aead_set_flags(aead, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+}
+
+struct link_tbl_entry {
+ u64 ptr;
+ u32 len;
+ u8 reserved;
+ u8 buf_pool_id;
+ u16 offset;
+};
+
+/*
+ * ipsec_esp_edesc - s/w-extended ipsec_esp descriptor
+ * @src_nents: number of segments in input scatterlist
+ * @dst_nents: number of segments in output scatterlist
+ * @assoc_nents: number of segments in associated data (SPI+Seq) scatterlist
+ * @desc: h/w descriptor (variable length; must not exceed MAX_CAAM_DESCSIZE)
+ * @link_tbl_bytes: length of dma mapped link_tbl space
+ * @link_tbl_dma: bus physical mapped address of h/w link table
+ * @hw_desc: the h/w job descriptor followed by any referenced link tables
+ */
+struct ipsec_esp_edesc {
+ int assoc_nents;
+ int src_nents;
+ int dst_nents;
+ int link_tbl_bytes;
+ dma_addr_t link_tbl_dma;
+ struct link_tbl_entry *link_tbl;
+ u32 hw_desc[0];
+};
+
+static void ipsec_esp_unmap(struct device *dev,
+ struct ipsec_esp_edesc *edesc,
+ struct aead_request *areq)
+{
+ dma_unmap_sg(dev, areq->assoc, edesc->assoc_nents, DMA_TO_DEVICE);
+
+ if (unlikely(areq->dst != areq->src)) {
+ dma_unmap_sg(dev, areq->src, edesc->src_nents,
+ DMA_TO_DEVICE);
+ dma_unmap_sg(dev, areq->dst, edesc->dst_nents,
+ DMA_FROM_DEVICE);
+ } else {
+ dma_unmap_sg(dev, areq->src, edesc->src_nents,
+ DMA_BIDIRECTIONAL);
+ }
+
+ if (edesc->link_tbl_bytes)
+ dma_unmap_single(dev, edesc->link_tbl_dma,
+ edesc->link_tbl_bytes,
+ DMA_TO_DEVICE);
+}
+
+/*
+ * ipsec_esp descriptor callbacks
+ */
+static void ipsec_esp_encrypt_done(struct device *jrdev, u32 *desc, u32 err,
+ void *context)
+{
+ struct aead_request *areq = context;
+ struct ipsec_esp_edesc *edesc;
+#ifdef DEBUG
+ struct crypto_aead *aead = crypto_aead_reqtfm(areq);
+ int ivsize = crypto_aead_ivsize(aead);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+
+ dev_err(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
+#endif
+ edesc = (struct ipsec_esp_edesc *)((char *)desc -
+ offsetof(struct ipsec_esp_edesc, hw_desc));
+
+ if (err) {
+ char tmp[CAAM_ERROR_STR_MAX];
+
+ dev_err(jrdev, "%08x: %s\n", err, caam_jr_strstatus(tmp, err));
+ }
+
+ ipsec_esp_unmap(jrdev, edesc, areq);
+
+#ifdef DEBUG
+ print_hex_dump(KERN_ERR, "assoc @"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(areq->assoc),
+ areq->assoclen , 1);
+ print_hex_dump(KERN_ERR, "dstiv @"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(areq->src) - ivsize,
+ edesc->src_nents ? 100 : ivsize, 1);
+ print_hex_dump(KERN_ERR, "dst @"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(areq->src),
+ edesc->src_nents ? 100 : areq->cryptlen +
+ ctx->authsize + 4, 1);
+#endif
+
+ kfree(edesc);
+
+ aead_request_complete(areq, err);
+}
+
+static void ipsec_esp_decrypt_done(struct device *jrdev, u32 *desc, u32 err,
+ void *context)
+{
+ struct aead_request *areq = context;
+ struct ipsec_esp_edesc *edesc;
+#ifdef DEBUG
+ struct crypto_aead *aead = crypto_aead_reqtfm(areq);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+
+ dev_err(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
+#endif
+ edesc = (struct ipsec_esp_edesc *)((char *)desc -
+ offsetof(struct ipsec_esp_edesc, hw_desc));
+
+ if (err) {
+ char tmp[CAAM_ERROR_STR_MAX];
+
+ dev_err(jrdev, "%08x: %s\n", err, caam_jr_strstatus(tmp, err));
+ }
+
+ ipsec_esp_unmap(jrdev, edesc, areq);
+
+ /*
+ * verify hw auth check passed else return -EBADMSG
+ */
+ if ((err & JRSTA_CCBERR_ERRID_MASK) == JRSTA_CCBERR_ERRID_ICVCHK)
+ err = -EBADMSG;
+
+#ifdef DEBUG
+ print_hex_dump(KERN_ERR, "iphdrout@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4,
+ ((char *)sg_virt(areq->assoc) - sizeof(struct iphdr)),
+ sizeof(struct iphdr) + areq->assoclen +
+ ((areq->cryptlen > 1500) ? 1500 : areq->cryptlen) +
+ ctx->authsize + 36, 1);
+ if (!err && edesc->link_tbl_bytes) {
+ struct scatterlist *sg = sg_last(areq->src, edesc->src_nents);
+ print_hex_dump(KERN_ERR, "sglastout@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(sg),
+ sg->length + ctx->authsize + 16, 1);
+ }
+#endif
+ kfree(edesc);
+
+ aead_request_complete(areq, err);
+}
+
+/*
+ * convert scatterlist to h/w link table format
+ * scatterlist must have been previously dma mapped
+ */
+static void sg_to_link_tbl(struct scatterlist *sg, int sg_count,
+ struct link_tbl_entry *link_tbl_ptr, u32 offset)
+{
+ while (sg_count) {
+ link_tbl_ptr->ptr = sg_dma_address(sg);
+ link_tbl_ptr->len = sg_dma_len(sg);
+ link_tbl_ptr->reserved = 0;
+ link_tbl_ptr->buf_pool_id = 0;
+ link_tbl_ptr->offset = offset;
+ link_tbl_ptr++;
+ sg = sg_next(sg);
+ sg_count--;
+ }
+
+ /* set Final bit (marks end of link table) */
+ link_tbl_ptr--;
+ link_tbl_ptr->len |= 0x40000000;
+}
+
+/*
+ * fill in and submit ipsec_esp job descriptor
+ */
+static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
+ u32 encrypt,
+ void (*callback) (struct device *dev, u32 *desc,
+ u32 err, void *context))
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(areq);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+ struct device *jrdev = ctx->jrdev;
+ u32 *desc = edesc->hw_desc, options;
+ int ret, sg_count, assoc_sg_count;
+ int ivsize = crypto_aead_ivsize(aead);
+ int authsize = ctx->authsize;
+ dma_addr_t ptr, dst_dma, src_dma;
+#ifdef DEBUG
+ u32 *sh_desc = ctx->sh_desc;
+
+ debug("assoclen %d cryptlen %d authsize %d\n",
+ areq->assoclen, areq->cryptlen, authsize);
+ print_hex_dump(KERN_ERR, "assoc @"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(areq->assoc),
+ areq->assoclen , 1);
+ print_hex_dump(KERN_ERR, "presciv@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(areq->src) - ivsize,
+ edesc->src_nents ? 100 : ivsize, 1);
+ print_hex_dump(KERN_ERR, "src @"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(areq->src),
+ edesc->src_nents ? 100 : areq->cryptlen + authsize, 1);
+ print_hex_dump(KERN_ERR, "shrdesc@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, sh_desc,
+ desc_bytes(sh_desc), 1);
+#endif
+ assoc_sg_count = dma_map_sg(jrdev, areq->assoc, edesc->assoc_nents ?: 1,
+ DMA_TO_DEVICE);
+ if (areq->src == areq->dst)
+ sg_count = dma_map_sg(jrdev, areq->src, edesc->src_nents ? : 1,
+ DMA_BIDIRECTIONAL);
+ else
+ sg_count = dma_map_sg(jrdev, areq->src, edesc->src_nents ? : 1,
+ DMA_TO_DEVICE);
+
+ /* start auth operation */
+ append_operation(desc, ctx->class2_alg_type | OP_ALG_AS_INITFINAL |
+ (encrypt ? : OP_ALG_ICV_ON));
+
+ /* Load FIFO with data for Class 2 CHA */
+ options = FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_MSG;
+ if (!edesc->assoc_nents) {
+ ptr = sg_dma_address(areq->assoc);
+ } else {
+ sg_to_link_tbl(areq->assoc, edesc->assoc_nents,
+ edesc->link_tbl, 0);
+ ptr = edesc->link_tbl_dma;
+ options |= LDST_SGF;
+ }
+ append_fifo_load(desc, ptr, areq->assoclen, options);
+
+ /* copy iv from cipher/class1 input context to class2 infifo */
+ append_move(desc, MOVE_SRC_CLASS1CTX | MOVE_DEST_CLASS2INFIFO | ivsize);
+
+ if (!encrypt) {
+ u32 *jump_cmd, *uncond_jump_cmd;
+
+ /* JUMP if shared */
+ jump_cmd = append_jump(desc, JUMP_TEST_ALL | JUMP_COND_SHRD);
+
+ /* start class 1 (cipher) operation, non-shared version */
+ append_operation(desc, ctx->class1_alg_type |
+ OP_ALG_AS_INITFINAL);
+
+ uncond_jump_cmd = append_jump(desc, 0);
+
+ set_jump_tgt_here(desc, jump_cmd);
+
+ /* start class 1 (cipher) operation, shared version */
+ append_operation(desc, ctx->class1_alg_type |
+ OP_ALG_AS_INITFINAL | OP_ALG_AAI_DK);
+ set_jump_tgt_here(desc, uncond_jump_cmd);
+ } else
+ append_operation(desc, ctx->class1_alg_type |
+ OP_ALG_AS_INITFINAL | encrypt);
+
+ /* load payload & instruct to class2 to snoop class 1 if encrypting */
+ options = 0;
+ if (!edesc->src_nents) {
+ src_dma = sg_dma_address(areq->src);
+ } else {
+ sg_to_link_tbl(areq->src, edesc->src_nents, edesc->link_tbl +
+ edesc->assoc_nents, 0);
+ src_dma = edesc->link_tbl_dma + edesc->assoc_nents *
+ sizeof(struct link_tbl_entry);
+ options |= LDST_SGF;
+ }
+ append_seq_in_ptr(desc, src_dma, areq->cryptlen + authsize, options);
+ append_seq_fifo_load(desc, areq->cryptlen, FIFOLD_CLASS_BOTH |
+ FIFOLD_TYPE_LASTBOTH |
+ (encrypt ? FIFOLD_TYPE_MSG1OUT2
+ : FIFOLD_TYPE_MSG));
+
+ /* specify destination */
+ if (areq->src == areq->dst) {
+ dst_dma = src_dma;
+ } else {
+ sg_count = dma_map_sg(jrdev, areq->dst, edesc->dst_nents ? : 1,
+ DMA_FROM_DEVICE);
+ if (!edesc->dst_nents) {
+ dst_dma = sg_dma_address(areq->dst);
+ options = 0;
+ } else {
+ sg_to_link_tbl(areq->dst, edesc->dst_nents,
+ edesc->link_tbl + edesc->assoc_nents +
+ edesc->src_nents, 0);
+ dst_dma = edesc->link_tbl_dma + (edesc->assoc_nents +
+ edesc->src_nents) *
+ sizeof(struct link_tbl_entry);
+ options = LDST_SGF;
+ }
+ }
+ append_seq_out_ptr(desc, dst_dma, areq->cryptlen + authsize, options);
+ append_seq_fifo_store(desc, areq->cryptlen, FIFOST_TYPE_MESSAGE_DATA);
+
+ /* ICV */
+ if (encrypt)
+ append_seq_store(desc, authsize, LDST_CLASS_2_CCB |
+ LDST_SRCDST_BYTE_CONTEXT);
+ else
+ append_seq_fifo_load(desc, authsize, FIFOLD_CLASS_CLASS2 |
+ FIFOLD_TYPE_LAST2 | FIFOLD_TYPE_ICV);
+
+#ifdef DEBUG
+ debug("job_desc_len %d\n", desc_len(desc));
+ print_hex_dump(KERN_ERR, "jobdesc@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, desc, desc_bytes(desc) , 1);
+ print_hex_dump(KERN_ERR, "jdlinkt@"xstr(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, edesc->link_tbl,
+ edesc->link_tbl_bytes, 1);
+#endif
+
+ ret = caam_jr_enqueue(jrdev, desc, callback, areq);
+ if (!ret)
+ ret = -EINPROGRESS;
+ else {
+ ipsec_esp_unmap(jrdev, edesc, areq);
+ kfree(edesc);
+ }
+
+ return ret;
+}
+
+/*
+ * derive number of elements in scatterlist
+ */
+static int sg_count(struct scatterlist *sg_list, int nbytes, int *chained)
+{
+ struct scatterlist *sg = sg_list;
+ int sg_nents = 0;
+
+ *chained = 0;
+ while (nbytes > 0) {
+ sg_nents++;
+ nbytes -= sg->length;
+ if (!sg_is_last(sg) && (sg + 1)->length == 0)
+ *chained = 1;
+ sg = scatterwalk_sg_next(sg);
+ }
+
+ return sg_nents;
+}
+
+/*
+ * allocate and map the ipsec_esp extended descriptor
+ */
+static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
+ int desc_bytes)
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(areq);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+ struct device *jrdev = ctx->jrdev;
+ gfp_t flags = areq->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
+ GFP_ATOMIC;
+ int assoc_nents, src_nents, dst_nents = 0, chained, link_tbl_bytes;
+ struct ipsec_esp_edesc *edesc;
+
+ assoc_nents = sg_count(areq->assoc, areq->assoclen, &chained);
+ BUG_ON(chained);
+ if (likely(assoc_nents == 1))
+ assoc_nents = 0;
+
+ src_nents = sg_count(areq->src, areq->cryptlen + ctx->authsize,
+ &chained);
+ BUG_ON(chained);
+ if (src_nents == 1)
+ src_nents = 0;
+
+ if (unlikely(areq->dst != areq->src)) {
+ dst_nents = sg_count(areq->dst, areq->cryptlen + ctx->authsize,
+ &chained);
+ BUG_ON(chained);
+ if (dst_nents == 1)
+ dst_nents = 0;
+ }
+
+ link_tbl_bytes = (assoc_nents + src_nents + dst_nents) *
+ sizeof(struct link_tbl_entry);
+ debug("link_tbl_bytes %d\n", link_tbl_bytes);
+
+ /* allocate space for base edesc and hw desc commands, link tables */
+ edesc = kmalloc(sizeof(struct ipsec_esp_edesc) + desc_bytes +
+ link_tbl_bytes, GFP_DMA | flags);
+ if (!edesc) {
+ dev_err(jrdev, "could not allocate extended descriptor\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ edesc->assoc_nents = assoc_nents;
+ edesc->src_nents = src_nents;
+ edesc->dst_nents = dst_nents;
+ edesc->link_tbl = (void *)edesc + sizeof(struct ipsec_esp_edesc) +
+ desc_bytes;
+ edesc->link_tbl_dma = dma_map_single(jrdev, edesc->link_tbl,
+ link_tbl_bytes, DMA_TO_DEVICE);
+ edesc->link_tbl_bytes = link_tbl_bytes;
+
+ return edesc;
+}
+
+static int aead_authenc_encrypt(struct aead_request *areq)
+{
+ struct ipsec_esp_edesc *edesc;
+ struct crypto_aead *aead = crypto_aead_reqtfm(areq);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+ struct device *jrdev = ctx->jrdev;
+ int ivsize = crypto_aead_ivsize(aead);
+ u32 *desc;
+ dma_addr_t iv_dma;
+
+ /* allocate extended descriptor */
+ edesc = ipsec_esp_edesc_alloc(areq, DESC_AEAD_ENCRYPT_TEXT_LEN *
+ CAAM_CMD_SZ);
+ if (IS_ERR(edesc))
+ return PTR_ERR(edesc);
+
+ desc = edesc->hw_desc;
+
+ /* insert shared descriptor pointer */
+ init_job_desc_shared(desc, ctx->shared_desc_phys,
+ desc_len(ctx->sh_desc), HDR_SHARE_DEFER);
+
+ iv_dma = dma_map_single(jrdev, areq->iv, ivsize, DMA_TO_DEVICE);
+ /* check dma error */
+
+ append_load(desc, iv_dma, ivsize,
+ LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT);
+
+ return ipsec_esp(edesc, areq, OP_ALG_ENCRYPT, ipsec_esp_encrypt_done);
+}
+
+static int aead_authenc_decrypt(struct aead_request *req)
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ int ivsize = crypto_aead_ivsize(aead);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+ struct device *jrdev = ctx->jrdev;
+ struct ipsec_esp_edesc *edesc;
+ u32 *desc;
+ dma_addr_t iv_dma;
+
+ req->cryptlen -= ctx->authsize;
+
+ /* allocate extended descriptor */
+ edesc = ipsec_esp_edesc_alloc(req, DESC_AEAD_DECRYPT_TEXT_LEN *
+ CAAM_CMD_SZ);
+ if (IS_ERR(edesc))
+ return PTR_ERR(edesc);
+
+ desc = edesc->hw_desc;
+
+ /* insert shared descriptor pointer */
+ init_job_desc_shared(desc, ctx->shared_desc_phys,
+ desc_len(ctx->sh_desc), HDR_SHARE_DEFER);
+
+ iv_dma = dma_map_single(jrdev, req->iv, ivsize, DMA_TO_DEVICE);
+ /* check dma error */
+
+ append_load(desc, iv_dma, ivsize,
+ LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT);
+
+ return ipsec_esp(edesc, req, !OP_ALG_ENCRYPT, ipsec_esp_decrypt_done);
+}
+
+static int aead_authenc_givencrypt(struct aead_givcrypt_request *req)
+{
+ struct aead_request *areq = &req->areq;
+ struct ipsec_esp_edesc *edesc;
+ struct crypto_aead *aead = crypto_aead_reqtfm(areq);
+ struct caam_ctx *ctx = crypto_aead_ctx(aead);
+ struct device *jrdev = ctx->jrdev;
+ int ivsize = crypto_aead_ivsize(aead);
+ dma_addr_t iv_dma;
+ u32 *desc;
+
+ iv_dma = dma_map_single(jrdev, req->giv, ivsize, DMA_FROM_DEVICE);
+
+ debug("%s: giv %p\n", __func__, req->giv);
+
+ /* allocate extended descriptor */
+ edesc = ipsec_esp_edesc_alloc(areq, DESC_AEAD_GIVENCRYPT_TEXT_LEN *
+ CAAM_CMD_SZ);
+ if (IS_ERR(edesc))
+ return PTR_ERR(edesc);
+
+ desc = edesc->hw_desc;
+
+ /* insert shared descriptor pointer */
+ init_job_desc_shared(desc, ctx->shared_desc_phys,
+ desc_len(ctx->sh_desc), HDR_SHARE_DEFER);
+
+ /*
+ * LOAD IMM Info FIFO
+ * to DECO, Last, Padding, Random, Message, 16 bytes
+ */
+ append_load_imm_u32(desc, NFIFOENTRY_DEST_DECO | NFIFOENTRY_LC1 |
+ NFIFOENTRY_STYPE_PAD | NFIFOENTRY_DTYPE_MSG |
+ NFIFOENTRY_PTYPE_RND | ivsize,
+ LDST_SRCDST_WORD_INFO_FIFO);
+
+ /*
+ * disable info fifo entries since the above serves as the entry
+ * this way, the MOVE command won't generate an entry.
+ * Note that this isn't required in more recent versions of
+ * SEC as a MOVE that doesn't do info FIFO entries is available.
+ */
+ append_cmd(desc, CMD_LOAD | DISABLE_AUTO_INFO_FIFO);
+
+ /* MOVE DECO Alignment -> C1 Context 16 bytes */
+ append_move(desc, MOVE_SRC_INFIFO | MOVE_DEST_CLASS1CTX | ivsize);
+
+ /* re-enable info fifo entries */
+ append_cmd(desc, CMD_LOAD | ENABLE_AUTO_INFO_FIFO);
+
+ /* MOVE C1 Context -> OFIFO 16 bytes */
+ append_move(desc, MOVE_SRC_CLASS1CTX | MOVE_DEST_OUTFIFO | ivsize);
+
+ append_fifo_store(desc, iv_dma, ivsize, FIFOST_TYPE_MESSAGE_DATA);
+
+ return ipsec_esp(edesc, areq, OP_ALG_ENCRYPT, ipsec_esp_encrypt_done);
+}
+
+struct caam_alg_template {
+ char name[CRYPTO_MAX_ALG_NAME];
+ char driver_name[CRYPTO_MAX_ALG_NAME];
+ unsigned int blocksize;
+ struct aead_alg aead;
+ u32 class1_alg_type;
+ u32 class2_alg_type;
+ u32 alg_op;
+};
+
+static struct caam_alg_template driver_algs[] = {
+ /* single-pass ipsec_esp descriptor */
+ {
+ .name = "authenc(hmac(sha1),cbc(aes))",
+ .driver_name = "authenc-hmac-sha1-cbc-aes-caam",
+ .blocksize = AES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = SHA1_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA1 | OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA1 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha256),cbc(aes))",
+ .driver_name = "authenc-hmac-sha256-cbc-aes-caam",
+ .blocksize = AES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = SHA256_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA256 |
+ OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA256 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha512),cbc(aes))",
+ .driver_name = "authenc-hmac-sha512-cbc-aes-caam",
+ .blocksize = AES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = SHA512_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA512 |
+ OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA512 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha1),cbc(des3_ede))",
+ .driver_name = "authenc-hmac-sha1-cbc-des3_ede-caam",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .maxauthsize = SHA1_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_3DES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA1 | OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA1 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha256),cbc(des3_ede))",
+ .driver_name = "authenc-hmac-sha256-cbc-des3_ede-caam",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .maxauthsize = SHA256_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_3DES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA256 |
+ OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA256 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha512),cbc(des3_ede))",
+ .driver_name = "authenc-hmac-sha512-cbc-des3_ede-caam",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .maxauthsize = SHA512_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_3DES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA512 |
+ OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA512 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha1),cbc(des))",
+ .driver_name = "authenc-hmac-sha1-cbc-des-caam",
+ .blocksize = DES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES_BLOCK_SIZE,
+ .maxauthsize = SHA1_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_DES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA1 | OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA1 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha256),cbc(des))",
+ .driver_name = "authenc-hmac-sha256-cbc-des-caam",
+ .blocksize = DES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES_BLOCK_SIZE,
+ .maxauthsize = SHA256_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_DES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA256 |
+ OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA256 | OP_ALG_AAI_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha512),cbc(des))",
+ .driver_name = "authenc-hmac-sha512-cbc-des-caam",
+ .blocksize = DES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES_BLOCK_SIZE,
+ .maxauthsize = SHA512_DIGEST_SIZE,
+ },
+ .class1_alg_type = OP_ALG_ALGSEL_DES | OP_ALG_AAI_CBC,
+ .class2_alg_type = OP_ALG_ALGSEL_SHA512 |
+ OP_ALG_AAI_HMAC_PRECOMP,
+ .alg_op = OP_ALG_ALGSEL_SHA512 | OP_ALG_AAI_HMAC,
+ },
+};
+
+struct caam_crypto_alg {
+ struct list_head entry;
+ struct device *ctrldev;
+ int class1_alg_type;
+ int class2_alg_type;
+ int alg_op;
+ struct crypto_alg crypto_alg;
+};
+
+static int caam_cra_init(struct crypto_tfm *tfm)
+{
+ struct crypto_alg *alg = tfm->__crt_alg;
+ struct caam_crypto_alg *caam_alg =
+ container_of(alg, struct caam_crypto_alg, crypto_alg);
+ struct caam_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct caam_drv_private *priv = dev_get_drvdata(caam_alg->ctrldev);
+ int tgt_jr = atomic_inc_return(&priv->tfm_count);
+
+ /*
+ * distribute tfms across job rings to ensure in-order
+ * crypto request processing per tfm
+ */
+ ctx->jrdev = priv->algapi_jr[(tgt_jr / 2) % priv->num_jrs_for_algapi];
+
+ /* copy descriptor header template value */
+ ctx->class1_alg_type = OP_TYPE_CLASS1_ALG | caam_alg->class1_alg_type;
+ ctx->class2_alg_type = OP_TYPE_CLASS2_ALG | caam_alg->class2_alg_type;
+ ctx->alg_op = OP_TYPE_CLASS2_ALG | caam_alg->alg_op;
+
+ return 0;
+}
+
+static void caam_cra_exit(struct crypto_tfm *tfm)
+{
+ struct caam_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (!dma_mapping_error(ctx->jrdev, ctx->shared_desc_phys))
+ dma_unmap_single(ctx->jrdev, ctx->shared_desc_phys,
+ desc_bytes(ctx->sh_desc), DMA_TO_DEVICE);
+ kfree(ctx->sh_desc);
+
+ if (!dma_mapping_error(ctx->jrdev, ctx->key_phys))
+ dma_unmap_single(ctx->jrdev, ctx->key_phys,
+ ctx->split_key_pad_len + ctx->enckeylen,
+ DMA_TO_DEVICE);
+ kfree(ctx->key);
+}
+
+static void __exit caam_algapi_exit(void)
+{
+
+ struct device_node *dev_node;
+ struct platform_device *pdev;
+ struct device *ctrldev;
+ struct caam_drv_private *priv;
+ struct caam_crypto_alg *t_alg, *n;
+ int i, err;
+
+ dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
+ if (!dev_node)
+ return;
+
+ pdev = of_find_device_by_node(dev_node);
+ if (!pdev)
+ return;
+
+ ctrldev = &pdev->dev;
+ of_node_put(dev_node);
+ priv = dev_get_drvdata(ctrldev);
+
+ if (!priv->alg_list.next)
+ return;
+
+ list_for_each_entry_safe(t_alg, n, &priv->alg_list, entry) {
+ crypto_unregister_alg(&t_alg->crypto_alg);
+ list_del(&t_alg->entry);
+ kfree(t_alg);
+ }
+
+ for (i = 0; i < priv->total_jobrs; i++) {
+ err = caam_jr_deregister(priv->algapi_jr[i]);
+ if (err < 0)
+ break;
+ }
+ kfree(priv->algapi_jr);
+}
+
+static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev,
+ struct caam_alg_template
+ *template)
+{
+ struct caam_crypto_alg *t_alg;
+ struct crypto_alg *alg;
+
+ t_alg = kzalloc(sizeof(struct caam_crypto_alg), GFP_KERNEL);
+ if (!t_alg) {
+ dev_err(ctrldev, "failed to allocate t_alg\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ alg = &t_alg->crypto_alg;
+
+ snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", template->name);
+ snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
+ template->driver_name);
+ alg->cra_module = THIS_MODULE;
+ alg->cra_init = caam_cra_init;
+ alg->cra_exit = caam_cra_exit;
+ alg->cra_priority = CAAM_CRA_PRIORITY;
+ alg->cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC;
+ alg->cra_blocksize = template->blocksize;
+ alg->cra_alignmask = 0;
+ alg->cra_type = &crypto_aead_type;
+ alg->cra_ctxsize = sizeof(struct caam_ctx);
+ alg->cra_u.aead = template->aead;
+
+ t_alg->class1_alg_type = template->class1_alg_type;
+ t_alg->class2_alg_type = template->class2_alg_type;
+ t_alg->alg_op = template->alg_op;
+ t_alg->ctrldev = ctrldev;
+
+ return t_alg;
+}
+
+static int __init caam_algapi_init(void)
+{
+ struct device_node *dev_node;
+ struct platform_device *pdev;
+ struct device *ctrldev, **jrdev;
+ struct caam_drv_private *priv;
+ int i = 0, err = 0;
+
+ dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
+ if (!dev_node)
+ return -ENODEV;
+
+ pdev = of_find_device_by_node(dev_node);
+ if (!pdev)
+ return -ENODEV;
+
+ ctrldev = &pdev->dev;
+ priv = dev_get_drvdata(ctrldev);
+ of_node_put(dev_node);
+
+ INIT_LIST_HEAD(&priv->alg_list);
+
+ jrdev = kmalloc(sizeof(*jrdev) * priv->total_jobrs, GFP_KERNEL);
+ if (!jrdev)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->total_jobrs; i++) {
+ err = caam_jr_register(ctrldev, &jrdev[i]);
+ if (err < 0)
+ break;
+ }
+ if (err < 0 && i == 0) {
+ dev_err(ctrldev, "algapi error in job ring registration: %d\n",
+ err);
+ kfree(jrdev);
+ return err;
+ }
+
+ priv->num_jrs_for_algapi = i;
+ priv->algapi_jr = jrdev;
+ atomic_set(&priv->tfm_count, -1);
+
+ /* register crypto algorithms the device supports */
+ for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
+ /* TODO: check if h/w supports alg */
+ struct caam_crypto_alg *t_alg;
+
+ t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
+ if (IS_ERR(t_alg)) {
+ err = PTR_ERR(t_alg);
+ dev_warn(ctrldev, "%s alg allocation failed\n",
+ driver_algs[i].driver_name);
+ continue;
+ }
+
+ err = crypto_register_alg(&t_alg->crypto_alg);
+ if (err) {
+ dev_warn(ctrldev, "%s alg registration failed\n",
+ t_alg->crypto_alg.cra_driver_name);
+ kfree(t_alg);
+ } else {
+ list_add_tail(&t_alg->entry, &priv->alg_list);
+ dev_info(ctrldev, "%s\n",
+ t_alg->crypto_alg.cra_driver_name);
+ }
+ }
+
+ return err;
+}
+
+module_init(caam_algapi_init);
+module_exit(caam_algapi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FSL CAAM support for crypto API");
+MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");
diff --git a/drivers/crypto/caam/compat.h b/drivers/crypto/caam/compat.h
new file mode 100644
index 0000000..9504503
--- /dev/null
+++ b/drivers/crypto/caam/compat.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef CAAM_COMPAT_H
+#define CAAM_COMPAT_H
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/crypto.h>
+#include <linux/hw_random.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/rtnetlink.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/debugfs.h>
+#include <linux/circ_buf.h>
+#include <net/xfrm.h>
+
+#include <crypto/algapi.h>
+#include <crypto/aes.h>
+#include <crypto/des.h>
+#include <crypto/sha.h>
+#include <crypto/aead.h>
+#include <crypto/authenc.h>
+#include <crypto/scatterwalk.h>
+
+#endif /* !defined(CAAM_COMPAT_H) */
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
new file mode 100644
index 0000000..9009713
--- /dev/null
+++ b/drivers/crypto/caam/ctrl.c
@@ -0,0 +1,269 @@
+/*
+ * CAAM control-plane driver backend
+ * Controller-level driver, kernel property detection, initialization
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#include "compat.h"
+#include "regs.h"
+#include "intern.h"
+#include "jr.h"
+
+static int caam_remove(struct platform_device *pdev)
+{
+ struct device *ctrldev;
+ struct caam_drv_private *ctrlpriv;
+ struct caam_drv_private_jr *jrpriv;
+ struct caam_full __iomem *topregs;
+ int ring, ret = 0;
+
+ ctrldev = &pdev->dev;
+ ctrlpriv = dev_get_drvdata(ctrldev);
+ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+
+ /* shut down JobRs */
+ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
+ ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]);
+ jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]);
+ irq_dispose_mapping(jrpriv->irq);
+ }
+
+ /* Shut down debug views */
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(ctrlpriv->dfs_root);
+#endif
+
+ /* Unmap controller region */
+ iounmap(&topregs->ctrl);
+
+ kfree(ctrlpriv->jrdev);
+ kfree(ctrlpriv);
+
+ return ret;
+}
+
+/* Probe routine for CAAM top (controller) level */
+static int caam_probe(struct platform_device *pdev)
+{
+ int d, ring, rspec;
+ struct device *dev;
+ struct device_node *nprop, *np;
+ struct caam_ctrl __iomem *ctrl;
+ struct caam_full __iomem *topregs;
+ struct caam_drv_private *ctrlpriv;
+ struct caam_perfmon *perfmon;
+ struct caam_deco **deco;
+ u32 deconum;
+
+ ctrlpriv = kzalloc(sizeof(struct caam_drv_private), GFP_KERNEL);
+ if (!ctrlpriv)
+ return -ENOMEM;
+
+ dev = &pdev->dev;
+ dev_set_drvdata(dev, ctrlpriv);
+ ctrlpriv->pdev = pdev;
+ nprop = pdev->dev.of_node;
+
+ /* Get configuration properties from device tree */
+ /* First, get register page */
+ ctrl = of_iomap(nprop, 0);
+ if (ctrl == NULL) {
+ dev_err(dev, "caam: of_iomap() failed\n");
+ return -ENOMEM;
+ }
+ ctrlpriv->ctrl = (struct caam_ctrl __force *)ctrl;
+
+ /* topregs used to derive pointers to CAAM sub-blocks only */
+ topregs = (struct caam_full __iomem *)ctrl;
+
+ /* Get the IRQ of the controller (for security violations only) */
+ ctrlpriv->secvio_irq = of_irq_to_resource(nprop, 0, NULL);
+
+ /*
+ * Enable DECO watchdogs and, if this is a PHYS_ADDR_T_64BIT kernel,
+ * 36-bit pointers in master configuration register
+ */
+ setbits32(&topregs->ctrl.mcr, MCFGR_WDENABLE |
+ (sizeof(dma_addr_t) == sizeof(u64) ? MCFGR_LONG_PTR : 0));
+
+ if (sizeof(dma_addr_t) == sizeof(u64))
+ dma_set_mask(dev, DMA_BIT_MASK(36));
+
+ /* Find out how many DECOs are present */
+ deconum = (rd_reg64(&topregs->ctrl.perfmon.cha_num) &
+ CHA_NUM_DECONUM_MASK) >> CHA_NUM_DECONUM_SHIFT;
+
+ ctrlpriv->deco = kmalloc(deconum * sizeof(struct caam_deco *),
+ GFP_KERNEL);
+
+ deco = (struct caam_deco __force **)&topregs->deco;
+ for (d = 0; d < deconum; d++)
+ ctrlpriv->deco[d] = deco[d];
+
+ /*
+ * Detect and enable JobRs
+ * First, find out how many ring spec'ed, allocate references
+ * for all, then go probe each one.
+ */
+ rspec = 0;
+ for_each_compatible_node(np, NULL, "fsl,sec-v4.0-job-ring")
+ rspec++;
+ ctrlpriv->jrdev = kzalloc(sizeof(struct device *) * rspec, GFP_KERNEL);
+ if (ctrlpriv->jrdev == NULL) {
+ iounmap(&topregs->ctrl);
+ return -ENOMEM;
+ }
+
+ ring = 0;
+ ctrlpriv->total_jobrs = 0;
+ for_each_compatible_node(np, NULL, "fsl,sec-v4.0-job-ring") {
+ caam_jr_probe(pdev, np, ring);
+ ctrlpriv->total_jobrs++;
+ ring++;
+ }
+
+ /* Check to see if QI present. If so, enable */
+ ctrlpriv->qi_present = !!(rd_reg64(&topregs->ctrl.perfmon.comp_parms) &
+ CTPR_QI_MASK);
+ if (ctrlpriv->qi_present) {
+ ctrlpriv->qi = (struct caam_queue_if __force *)&topregs->qi;
+ /* This is all that's required to physically enable QI */
+ wr_reg32(&topregs->qi.qi_control_lo, QICTL_DQEN);
+ }
+
+ /* If no QI and no rings specified, quit and go home */
+ if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) {
+ dev_err(dev, "no queues configured, terminating\n");
+ caam_remove(pdev);
+ return -ENOMEM;
+ }
+
+ /* NOTE: RTIC detection ought to go here, around Si time */
+
+ /* Initialize queue allocator lock */
+ spin_lock_init(&ctrlpriv->jr_alloc_lock);
+
+ /* Report "alive" for developer to see */
+ dev_info(dev, "device ID = 0x%016llx\n",
+ rd_reg64(&topregs->ctrl.perfmon.caam_id));
+ dev_info(dev, "job rings = %d, qi = %d\n",
+ ctrlpriv->total_jobrs, ctrlpriv->qi_present);
+
+#ifdef CONFIG_DEBUG_FS
+ /*
+ * FIXME: needs better naming distinction, as some amalgamation of
+ * "caam" and nprop->full_name. The OF name isn't distinctive,
+ * but does separate instances
+ */
+ perfmon = (struct caam_perfmon __force *)&ctrl->perfmon;
+
+ ctrlpriv->dfs_root = debugfs_create_dir("caam", NULL);
+ ctrlpriv->ctl = debugfs_create_dir("ctl", ctrlpriv->dfs_root);
+
+ /* Controller-level - performance monitor counters */
+ ctrlpriv->ctl_rq_dequeued =
+ debugfs_create_u64("rq_dequeued",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->req_dequeued);
+ ctrlpriv->ctl_ob_enc_req =
+ debugfs_create_u64("ob_rq_encrypted",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->ob_enc_req);
+ ctrlpriv->ctl_ib_dec_req =
+ debugfs_create_u64("ib_rq_decrypted",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->ib_dec_req);
+ ctrlpriv->ctl_ob_enc_bytes =
+ debugfs_create_u64("ob_bytes_encrypted",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->ob_enc_bytes);
+ ctrlpriv->ctl_ob_prot_bytes =
+ debugfs_create_u64("ob_bytes_protected",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->ob_prot_bytes);
+ ctrlpriv->ctl_ib_dec_bytes =
+ debugfs_create_u64("ib_bytes_decrypted",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->ib_dec_bytes);
+ ctrlpriv->ctl_ib_valid_bytes =
+ debugfs_create_u64("ib_bytes_validated",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->ib_valid_bytes);
+
+ /* Controller level - global status values */
+ ctrlpriv->ctl_faultaddr =
+ debugfs_create_u64("fault_addr",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->faultaddr);
+ ctrlpriv->ctl_faultdetail =
+ debugfs_create_u32("fault_detail",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->faultdetail);
+ ctrlpriv->ctl_faultstatus =
+ debugfs_create_u32("fault_status",
+ S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH,
+ ctrlpriv->ctl, &perfmon->status);
+
+ /* Internal covering keys (useful in non-secure mode only) */
+ ctrlpriv->ctl_kek_wrap.data = &ctrlpriv->ctrl->kek[0];
+ ctrlpriv->ctl_kek_wrap.size = KEK_KEY_SIZE * sizeof(u32);
+ ctrlpriv->ctl_kek = debugfs_create_blob("kek",
+ S_IFCHR | S_IRUSR |
+ S_IRGRP | S_IROTH,
+ ctrlpriv->ctl,
+ &ctrlpriv->ctl_kek_wrap);
+
+ ctrlpriv->ctl_tkek_wrap.data = &ctrlpriv->ctrl->tkek[0];
+ ctrlpriv->ctl_tkek_wrap.size = KEK_KEY_SIZE * sizeof(u32);
+ ctrlpriv->ctl_tkek = debugfs_create_blob("tkek",
+ S_IFCHR | S_IRUSR |
+ S_IRGRP | S_IROTH,
+ ctrlpriv->ctl,
+ &ctrlpriv->ctl_tkek_wrap);
+
+ ctrlpriv->ctl_tdsk_wrap.data = &ctrlpriv->ctrl->tdsk[0];
+ ctrlpriv->ctl_tdsk_wrap.size = KEK_KEY_SIZE * sizeof(u32);
+ ctrlpriv->ctl_tdsk = debugfs_create_blob("tdsk",
+ S_IFCHR | S_IRUSR |
+ S_IRGRP | S_IROTH,
+ ctrlpriv->ctl,
+ &ctrlpriv->ctl_tdsk_wrap);
+#endif
+ return 0;
+}
+
+static struct of_device_id caam_match[] = {
+ {
+ .compatible = "fsl,sec-v4.0",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, caam_match);
+
+static struct platform_driver caam_driver = {
+ .driver = {
+ .name = "caam",
+ .owner = THIS_MODULE,
+ .of_match_table = caam_match,
+ },
+ .probe = caam_probe,
+ .remove = __devexit_p(caam_remove),
+};
+
+static int __init caam_base_init(void)
+{
+ return platform_driver_register(&caam_driver);
+}
+
+static void __exit caam_base_exit(void)
+{
+ return platform_driver_unregister(&caam_driver);
+}
+
+module_init(caam_base_init);
+module_exit(caam_base_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FSL CAAM request backend");
+MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");
diff --git a/drivers/crypto/caam/desc.h b/drivers/crypto/caam/desc.h
new file mode 100644
index 0000000..974a758
--- /dev/null
+++ b/drivers/crypto/caam/desc.h
@@ -0,0 +1,1605 @@
+/*
+ * CAAM descriptor composition header
+ * Definitions to support CAAM descriptor instruction generation
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef DESC_H
+#define DESC_H
+
+/* Max size of any CAAM descriptor in 32-bit words, inclusive of header */
+#define MAX_CAAM_DESCSIZE 64
+
+/* Block size of any entity covered/uncovered with a KEK/TKEK */
+#define KEK_BLOCKSIZE 16
+
+/*
+ * Supported descriptor command types as they show up
+ * inside a descriptor command word.
+ */
+#define CMD_SHIFT 27
+#define CMD_MASK 0xf8000000
+
+#define CMD_KEY (0x00 << CMD_SHIFT)
+#define CMD_SEQ_KEY (0x01 << CMD_SHIFT)
+#define CMD_LOAD (0x02 << CMD_SHIFT)
+#define CMD_SEQ_LOAD (0x03 << CMD_SHIFT)
+#define CMD_FIFO_LOAD (0x04 << CMD_SHIFT)
+#define CMD_SEQ_FIFO_LOAD (0x05 << CMD_SHIFT)
+#define CMD_STORE (0x0a << CMD_SHIFT)
+#define CMD_SEQ_STORE (0x0b << CMD_SHIFT)
+#define CMD_FIFO_STORE (0x0c << CMD_SHIFT)
+#define CMD_SEQ_FIFO_STORE (0x0d << CMD_SHIFT)
+#define CMD_MOVE_LEN (0x0e << CMD_SHIFT)
+#define CMD_MOVE (0x0f << CMD_SHIFT)
+#define CMD_OPERATION (0x10 << CMD_SHIFT)
+#define CMD_SIGNATURE (0x12 << CMD_SHIFT)
+#define CMD_JUMP (0x14 << CMD_SHIFT)
+#define CMD_MATH (0x15 << CMD_SHIFT)
+#define CMD_DESC_HDR (0x16 << CMD_SHIFT)
+#define CMD_SHARED_DESC_HDR (0x17 << CMD_SHIFT)
+#define CMD_SEQ_IN_PTR (0x1e << CMD_SHIFT)
+#define CMD_SEQ_OUT_PTR (0x1f << CMD_SHIFT)
+
+/* General-purpose class selector for all commands */
+#define CLASS_SHIFT 25
+#define CLASS_MASK (0x03 << CLASS_SHIFT)
+
+#define CLASS_NONE (0x00 << CLASS_SHIFT)
+#define CLASS_1 (0x01 << CLASS_SHIFT)
+#define CLASS_2 (0x02 << CLASS_SHIFT)
+#define CLASS_BOTH (0x03 << CLASS_SHIFT)
+
+/*
+ * Descriptor header command constructs
+ * Covers shared, job, and trusted descriptor headers
+ */
+
+/*
+ * Do Not Run - marks a descriptor inexecutable if there was
+ * a preceding error somewhere
+ */
+#define HDR_DNR 0x01000000
+
+/*
+ * ONE - should always be set. Combination of ONE (always
+ * set) and ZRO (always clear) forms an endianness sanity check
+ */
+#define HDR_ONE 0x00800000
+#define HDR_ZRO 0x00008000
+
+/* Start Index or SharedDesc Length */
+#define HDR_START_IDX_MASK 0x3f
+#define HDR_START_IDX_SHIFT 16
+
+/* If shared descriptor header, 6-bit length */
+#define HDR_DESCLEN_SHR_MASK 0x3f
+
+/* If non-shared header, 7-bit length */
+#define HDR_DESCLEN_MASK 0x7f
+
+/* This is a TrustedDesc (if not SharedDesc) */
+#define HDR_TRUSTED 0x00004000
+
+/* Make into TrustedDesc (if not SharedDesc) */
+#define HDR_MAKE_TRUSTED 0x00002000
+
+/* Save context if self-shared (if SharedDesc) */
+#define HDR_SAVECTX 0x00001000
+
+/* Next item points to SharedDesc */
+#define HDR_SHARED 0x00001000
+
+/*
+ * Reverse Execution Order - execute JobDesc first, then
+ * execute SharedDesc (normally SharedDesc goes first).
+ */
+#define HDR_REVERSE 0x00000800
+
+/* Propogate DNR property to SharedDesc */
+#define HDR_PROP_DNR 0x00000800
+
+/* JobDesc/SharedDesc share property */
+#define HDR_SD_SHARE_MASK 0x03
+#define HDR_SD_SHARE_SHIFT 8
+#define HDR_JD_SHARE_MASK 0x07
+#define HDR_JD_SHARE_SHIFT 8
+
+#define HDR_SHARE_NEVER (0x00 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_WAIT (0x01 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_SERIAL (0x02 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_ALWAYS (0x03 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_DEFER (0x04 << HDR_SD_SHARE_SHIFT)
+
+/* JobDesc/SharedDesc descriptor length */
+#define HDR_JD_LENGTH_MASK 0x7f
+#define HDR_SD_LENGTH_MASK 0x3f
+
+/*
+ * KEY/SEQ_KEY Command Constructs
+ */
+
+/* Key Destination Class: 01 = Class 1, 02 - Class 2 */
+#define KEY_DEST_CLASS_SHIFT 25 /* use CLASS_1 or CLASS_2 */
+#define KEY_DEST_CLASS_MASK (0x03 << KEY_DEST_CLASS_SHIFT)
+
+/* Scatter-Gather Table/Variable Length Field */
+#define KEY_SGF 0x01000000
+#define KEY_VLF 0x01000000
+
+/* Immediate - Key follows command in the descriptor */
+#define KEY_IMM 0x00800000
+
+/*
+ * Encrypted - Key is encrypted either with the KEK, or
+ * with the TDKEK if TK is set
+ */
+#define KEY_ENC 0x00400000
+
+/*
+ * No Write Back - Do not allow key to be FIFO STOREd
+ */
+#define KEY_NWB 0x00200000
+
+/*
+ * Enhanced Encryption of Key
+ */
+#define KEY_EKT 0x00100000
+
+/*
+ * Encrypted with Trusted Key
+ */
+#define KEY_TK 0x00008000
+
+/*
+ * KDEST - Key Destination: 0 - class key register,
+ * 1 - PKHA 'e', 2 - AFHA Sbox, 3 - MDHA split-key
+ */
+#define KEY_DEST_SHIFT 16
+#define KEY_DEST_MASK (0x03 << KEY_DEST_SHIFT)
+
+#define KEY_DEST_CLASS_REG (0x00 << KEY_DEST_SHIFT)
+#define KEY_DEST_PKHA_E (0x01 << KEY_DEST_SHIFT)
+#define KEY_DEST_AFHA_SBOX (0x02 << KEY_DEST_SHIFT)
+#define KEY_DEST_MDHA_SPLIT (0x03 << KEY_DEST_SHIFT)
+
+/* Length in bytes */
+#define KEY_LENGTH_MASK 0x000003ff
+
+/*
+ * LOAD/SEQ_LOAD/STORE/SEQ_STORE Command Constructs
+ */
+
+/*
+ * Load/Store Destination: 0 = class independent CCB,
+ * 1 = class 1 CCB, 2 = class 2 CCB, 3 = DECO
+ */
+#define LDST_CLASS_SHIFT 25
+#define LDST_CLASS_MASK (0x03 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_IND_CCB (0x00 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_1_CCB (0x01 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_2_CCB (0x02 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_DECO (0x03 << LDST_CLASS_SHIFT)
+
+/* Scatter-Gather Table/Variable Length Field */
+#define LDST_SGF 0x01000000
+#define LDST_VLF LDST_SGF
+
+/* Immediate - Key follows this command in descriptor */
+#define LDST_IMM_MASK 1
+#define LDST_IMM_SHIFT 23
+#define LDST_IMM (LDST_IMM_MASK << LDST_IMM_SHIFT)
+
+/* SRC/DST - Destination for LOAD, Source for STORE */
+#define LDST_SRCDST_SHIFT 16
+#define LDST_SRCDST_MASK (0x7f << LDST_SRCDST_SHIFT)
+
+#define LDST_SRCDST_BYTE_CONTEXT (0x20 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_KEY (0x40 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_INFIFO (0x7c << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_OUTFIFO (0x7e << LDST_SRCDST_SHIFT)
+
+#define LDST_SRCDST_WORD_MODE_REG (0x00 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_KEYSZ_REG (0x01 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DATASZ_REG (0x02 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_ICVSZ_REG (0x03 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CHACTRL (0x06 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECOCTRL (0x06 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_IRQCTRL (0x07 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_PCLOVRD (0x07 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CLRW (0x08 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH0 (0x08 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_STAT (0x09 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH1 (0x09 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH2 (0x0a << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_AAD_SZ (0x0b << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH3 (0x0b << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CLASS1_ICV_SZ (0x0c << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_ALTDS_CLASS1 (0x0f << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_A_SZ (0x10 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_B_SZ (0x11 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_N_SZ (0x12 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_E_SZ (0x13 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DESCBUF (0x40 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_INFO_FIFO (0x7a << LDST_SRCDST_SHIFT)
+
+/* Offset in source/destination */
+#define LDST_OFFSET_SHIFT 8
+#define LDST_OFFSET_MASK (0xff << LDST_OFFSET_SHIFT)
+
+/* LDOFF definitions used when DST = LDST_SRCDST_WORD_DECOCTRL */
+/* These could also be shifted by LDST_OFFSET_SHIFT - this reads better */
+#define LDOFF_CHG_SHARE_SHIFT 0
+#define LDOFF_CHG_SHARE_MASK (0x3 << LDOFF_CHG_SHARE_SHIFT)
+#define LDOFF_CHG_SHARE_NEVER (0x1 << LDOFF_CHG_SHARE_SHIFT)
+#define LDOFF_CHG_SHARE_OK_NO_PROP (0x2 << LDOFF_CHG_SHARE_SHIFT)
+#define LDOFF_CHG_SHARE_OK_PROP (0x3 << LDOFF_CHG_SHARE_SHIFT)
+
+#define LDOFF_ENABLE_AUTO_NFIFO (1 << 2)
+#define LDOFF_DISABLE_AUTO_NFIFO (1 << 3)
+
+#define LDOFF_CHG_NONSEQLIODN_SHIFT 4
+#define LDOFF_CHG_NONSEQLIODN_MASK (0x3 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+#define LDOFF_CHG_NONSEQLIODN_SEQ (0x1 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+#define LDOFF_CHG_NONSEQLIODN_NON_SEQ (0x2 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+#define LDOFF_CHG_NONSEQLIODN_TRUSTED (0x3 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+
+#define LDOFF_CHG_SEQLIODN_SHIFT 6
+#define LDOFF_CHG_SEQLIODN_MASK (0x3 << LDOFF_CHG_SEQLIODN_SHIFT)
+#define LDOFF_CHG_SEQLIODN_SEQ (0x1 << LDOFF_CHG_SEQLIODN_SHIFT)
+#define LDOFF_CHG_SEQLIODN_NON_SEQ (0x2 << LDOFF_CHG_SEQLIODN_SHIFT)
+#define LDOFF_CHG_SEQLIODN_TRUSTED (0x3 << LDOFF_CHG_SEQLIODN_SHIFT)
+
+/* Data length in bytes */
+#define LDST_LEN_SHIFT 0
+#define LDST_LEN_MASK (0xff << LDST_LEN_SHIFT)
+
+/* Special Length definitions when dst=deco-ctrl */
+#define LDLEN_ENABLE_OSL_COUNT (1 << 7)
+#define LDLEN_RST_CHA_OFIFO_PTR (1 << 6)
+#define LDLEN_RST_OFIFO (1 << 5)
+#define LDLEN_SET_OFIFO_OFF_VALID (1 << 4)
+#define LDLEN_SET_OFIFO_OFF_RSVD (1 << 3)
+#define LDLEN_SET_OFIFO_OFFSET_SHIFT 0
+#define LDLEN_SET_OFIFO_OFFSET_MASK (3 << LDLEN_SET_OFIFO_OFFSET_SHIFT)
+
+/*
+ * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE
+ * Command Constructs
+ */
+
+/*
+ * Load Destination: 0 = skip (SEQ_FIFO_LOAD only),
+ * 1 = Load for Class1, 2 = Load for Class2, 3 = Load both
+ * Store Source: 0 = normal, 1 = Class1key, 2 = Class2key
+ */
+#define FIFOLD_CLASS_SHIFT 25
+#define FIFOLD_CLASS_MASK (0x03 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_SKIP (0x00 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_CLASS1 (0x01 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_CLASS2 (0x02 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_BOTH (0x03 << FIFOLD_CLASS_SHIFT)
+
+#define FIFOST_CLASS_SHIFT 25
+#define FIFOST_CLASS_MASK (0x03 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_NORMAL (0x00 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_CLASS1KEY (0x01 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_CLASS2KEY (0x02 << FIFOST_CLASS_SHIFT)
+
+/*
+ * Scatter-Gather Table/Variable Length Field
+ * If set for FIFO_LOAD, refers to a SG table. Within
+ * SEQ_FIFO_LOAD, is variable input sequence
+ */
+#define FIFOLDST_SGF_SHIFT 24
+#define FIFOLDST_SGF_MASK (1 << FIFOLDST_SGF_SHIFT)
+#define FIFOLDST_VLF_MASK (1 << FIFOLDST_SGF_SHIFT)
+#define FIFOLDST_SGF (1 << FIFOLDST_SGF_SHIFT)
+#define FIFOLDST_VLF (1 << FIFOLDST_SGF_SHIFT)
+
+/* Immediate - Data follows command in descriptor */
+#define FIFOLD_IMM_SHIFT 23
+#define FIFOLD_IMM_MASK (1 << FIFOLD_IMM_SHIFT)
+#define FIFOLD_IMM (1 << FIFOLD_IMM_SHIFT)
+
+/* Continue - Not the last FIFO store to come */
+#define FIFOST_CONT_SHIFT 23
+#define FIFOST_CONT_MASK (1 << FIFOST_CONT_SHIFT)
+#define FIFOST_CONT_MASK (1 << FIFOST_CONT_SHIFT)
+
+/*
+ * Extended Length - use 32-bit extended length that
+ * follows the pointer field. Illegal with IMM set
+ */
+#define FIFOLDST_EXT_SHIFT 22
+#define FIFOLDST_EXT_MASK (1 << FIFOLDST_EXT_SHIFT)
+#define FIFOLDST_EXT (1 << FIFOLDST_EXT_SHIFT)
+
+/* Input data type.*/
+#define FIFOLD_TYPE_SHIFT 16
+#define FIFOLD_CONT_TYPE_SHIFT 19 /* shift past last-flush bits */
+#define FIFOLD_TYPE_MASK (0x3f << FIFOLD_TYPE_SHIFT)
+
+/* PK types */
+#define FIFOLD_TYPE_PK (0x00 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_MASK (0x30 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_TYPEMASK (0x0f << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A0 (0x00 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A1 (0x01 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A2 (0x02 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A3 (0x03 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B0 (0x04 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B1 (0x05 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B2 (0x06 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B3 (0x07 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_N (0x08 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A (0x0c << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B (0x0d << FIFOLD_TYPE_SHIFT)
+
+/* Other types. Need to OR in last/flush bits as desired */
+#define FIFOLD_TYPE_MSG_MASK (0x38 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_MSG (0x10 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_MSG1OUT2 (0x18 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_IV (0x20 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_BITDATA (0x28 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_AAD (0x30 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_ICV (0x38 << FIFOLD_TYPE_SHIFT)
+
+/* Last/Flush bits for use with "other" types above */
+#define FIFOLD_TYPE_ACT_MASK (0x07 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_NOACTION (0x00 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_FLUSH1 (0x01 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST1 (0x02 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST2FLUSH (0x03 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST2 (0x04 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST2FLUSH1 (0x05 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LASTBOTH (0x06 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LASTBOTHFL (0x07 << FIFOLD_TYPE_SHIFT)
+
+#define FIFOLDST_LEN_MASK 0xffff
+#define FIFOLDST_EXT_LEN_MASK 0xffffffff
+
+/* Output data types */
+#define FIFOST_TYPE_SHIFT 16
+#define FIFOST_TYPE_MASK (0x3f << FIFOST_TYPE_SHIFT)
+
+#define FIFOST_TYPE_PKHA_A0 (0x00 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A1 (0x01 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A2 (0x02 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A3 (0x03 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B0 (0x04 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B1 (0x05 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B2 (0x06 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B3 (0x07 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_N (0x08 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A (0x0c << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B (0x0d << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_AF_SBOX_JKEK (0x10 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_AF_SBOX_TKEK (0x21 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_E_JKEK (0x22 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_E_TKEK (0x23 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_KEY_KEK (0x24 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_KEY_TKEK (0x25 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_SPLIT_KEK (0x26 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_SPLIT_TKEK (0x27 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_OUTFIFO_KEK (0x28 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_OUTFIFO_TKEK (0x29 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_MESSAGE_DATA (0x30 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_RNGSTORE (0x34 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_RNGFIFO (0x35 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_SKIP (0x3f << FIFOST_TYPE_SHIFT)
+
+/*
+ * OPERATION Command Constructs
+ */
+
+/* Operation type selectors - OP TYPE */
+#define OP_TYPE_SHIFT 24
+#define OP_TYPE_MASK (0x07 << OP_TYPE_SHIFT)
+
+#define OP_TYPE_UNI_PROTOCOL (0x00 << OP_TYPE_SHIFT)
+#define OP_TYPE_PK (0x01 << OP_TYPE_SHIFT)
+#define OP_TYPE_CLASS1_ALG (0x02 << OP_TYPE_SHIFT)
+#define OP_TYPE_CLASS2_ALG (0x04 << OP_TYPE_SHIFT)
+#define OP_TYPE_DECAP_PROTOCOL (0x06 << OP_TYPE_SHIFT)
+#define OP_TYPE_ENCAP_PROTOCOL (0x07 << OP_TYPE_SHIFT)
+
+/* ProtocolID selectors - PROTID */
+#define OP_PCLID_SHIFT 16
+#define OP_PCLID_MASK (0xff << 16)
+
+/* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
+#define OP_PCLID_IKEV1_PRF (0x01 << OP_PCLID_SHIFT)
+#define OP_PCLID_IKEV2_PRF (0x02 << OP_PCLID_SHIFT)
+#define OP_PCLID_SSL30_PRF (0x08 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS10_PRF (0x09 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS11_PRF (0x0a << OP_PCLID_SHIFT)
+#define OP_PCLID_DTLS10_PRF (0x0c << OP_PCLID_SHIFT)
+#define OP_PCLID_PRF (0x06 << OP_PCLID_SHIFT)
+#define OP_PCLID_BLOB (0x0d << OP_PCLID_SHIFT)
+#define OP_PCLID_SECRETKEY (0x11 << OP_PCLID_SHIFT)
+#define OP_PCLID_PUBLICKEYPAIR (0x14 << OP_PCLID_SHIFT)
+#define OP_PCLID_DSASIGN (0x15 << OP_PCLID_SHIFT)
+#define OP_PCLID_DSAVERIFY (0x16 << OP_PCLID_SHIFT)
+
+/* Assuming OP_TYPE = OP_TYPE_DECAP_PROTOCOL/ENCAP_PROTOCOL */
+#define OP_PCLID_IPSEC (0x01 << OP_PCLID_SHIFT)
+#define OP_PCLID_SRTP (0x02 << OP_PCLID_SHIFT)
+#define OP_PCLID_MACSEC (0x03 << OP_PCLID_SHIFT)
+#define OP_PCLID_WIFI (0x04 << OP_PCLID_SHIFT)
+#define OP_PCLID_WIMAX (0x05 << OP_PCLID_SHIFT)
+#define OP_PCLID_SSL30 (0x08 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS10 (0x09 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS11 (0x0a << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS12 (0x0b << OP_PCLID_SHIFT)
+#define OP_PCLID_DTLS (0x0c << OP_PCLID_SHIFT)
+
+/*
+ * ProtocolInfo selectors
+ */
+#define OP_PCLINFO_MASK 0xffff
+
+/* for OP_PCLID_IPSEC */
+#define OP_PCL_IPSEC_CIPHER_MASK 0xff00
+#define OP_PCL_IPSEC_AUTH_MASK 0x00ff
+
+#define OP_PCL_IPSEC_DES_IV64 0x0100
+#define OP_PCL_IPSEC_DES 0x0200
+#define OP_PCL_IPSEC_3DES 0x0300
+#define OP_PCL_IPSEC_AES_CBC 0x0c00
+#define OP_PCL_IPSEC_AES_CTR 0x0d00
+#define OP_PCL_IPSEC_AES_XTS 0x1600
+#define OP_PCL_IPSEC_AES_CCM8 0x0e00
+#define OP_PCL_IPSEC_AES_CCM12 0x0f00
+#define OP_PCL_IPSEC_AES_CCM16 0x1000
+#define OP_PCL_IPSEC_AES_GCM8 0x1200
+#define OP_PCL_IPSEC_AES_GCM12 0x1300
+#define OP_PCL_IPSEC_AES_GCM16 0x1400
+
+#define OP_PCL_IPSEC_HMAC_NULL 0x0000
+#define OP_PCL_IPSEC_HMAC_MD5_96 0x0001
+#define OP_PCL_IPSEC_HMAC_SHA1_96 0x0002
+#define OP_PCL_IPSEC_AES_XCBC_MAC_96 0x0005
+#define OP_PCL_IPSEC_HMAC_MD5_128 0x0006
+#define OP_PCL_IPSEC_HMAC_SHA1_160 0x0007
+#define OP_PCL_IPSEC_HMAC_SHA2_256_128 0x000c
+#define OP_PCL_IPSEC_HMAC_SHA2_384_192 0x000d
+#define OP_PCL_IPSEC_HMAC_SHA2_512_256 0x000e
+
+/* For SRTP - OP_PCLID_SRTP */
+#define OP_PCL_SRTP_CIPHER_MASK 0xff00
+#define OP_PCL_SRTP_AUTH_MASK 0x00ff
+
+#define OP_PCL_SRTP_AES_CTR 0x0d00
+
+#define OP_PCL_SRTP_HMAC_SHA1_160 0x0007
+
+/* For SSL 3.0 - OP_PCLID_SSL30 */
+#define OP_PCL_SSL30_AES_128_CBC_SHA 0x002f
+#define OP_PCL_SSL30_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_SSL30_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_SSL30_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_SSL30_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_SSL30_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_SSL30_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_SSL30_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_SSL30_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_SSL30_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_SSL30_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_SSL30_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_SSL30_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_SSL30_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_SSL30_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_SSL30_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_SSL30_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_SSL30_AES_256_CBC_SHA 0x0035
+#define OP_PCL_SSL30_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_SSL30_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_SSL30_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_SSL30_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_SSL30_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_SSL30_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_SSL30_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_SSL30_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_SSL30_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_SSL30_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_SSL30_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_SSL30_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_SSL30_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_SSL30_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_SSL30_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_SSL30_AES_256_CBC_SHA_17 0xc022
+
+#define OP_PCL_SSL30_3DES_EDE_CBC_MD5 0x0023
+
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_SSL30_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_SSL30_DES_CBC_MD5 0x0022
+
+#define OP_PCL_SSL30_DES40_CBC_SHA 0x0008
+#define OP_PCL_SSL30_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_SSL30_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_SSL30_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_SSL30_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_SSL30_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_SSL30_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_SSL30_DES_CBC_SHA 0x001e
+#define OP_PCL_SSL30_DES_CBC_SHA_2 0x0009
+#define OP_PCL_SSL30_DES_CBC_SHA_3 0x000c
+#define OP_PCL_SSL30_DES_CBC_SHA_4 0x000f
+#define OP_PCL_SSL30_DES_CBC_SHA_5 0x0012
+#define OP_PCL_SSL30_DES_CBC_SHA_6 0x0015
+#define OP_PCL_SSL30_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_SSL30_RC4_128_MD5 0x0024
+#define OP_PCL_SSL30_RC4_128_MD5_2 0x0004
+#define OP_PCL_SSL30_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_SSL30_RC4_40_MD5 0x002b
+#define OP_PCL_SSL30_RC4_40_MD5_2 0x0003
+#define OP_PCL_SSL30_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_SSL30_RC4_128_SHA 0x0020
+#define OP_PCL_SSL30_RC4_128_SHA_2 0x008a
+#define OP_PCL_SSL30_RC4_128_SHA_3 0x008e
+#define OP_PCL_SSL30_RC4_128_SHA_4 0x0092
+#define OP_PCL_SSL30_RC4_128_SHA_5 0x0005
+#define OP_PCL_SSL30_RC4_128_SHA_6 0xc002
+#define OP_PCL_SSL30_RC4_128_SHA_7 0xc007
+#define OP_PCL_SSL30_RC4_128_SHA_8 0xc00c
+#define OP_PCL_SSL30_RC4_128_SHA_9 0xc011
+#define OP_PCL_SSL30_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_SSL30_RC4_40_SHA 0x0028
+
+
+/* For TLS 1.0 - OP_PCLID_TLS10 */
+#define OP_PCL_TLS10_AES_128_CBC_SHA 0x002f
+#define OP_PCL_TLS10_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_TLS10_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_TLS10_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_TLS10_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_TLS10_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_TLS10_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_TLS10_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_TLS10_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_TLS10_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_TLS10_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_TLS10_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_TLS10_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_TLS10_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_TLS10_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_TLS10_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_TLS10_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_TLS10_AES_256_CBC_SHA 0x0035
+#define OP_PCL_TLS10_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_TLS10_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_TLS10_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_TLS10_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_TLS10_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_TLS10_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_TLS10_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_TLS10_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_TLS10_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_TLS10_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_TLS10_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_TLS10_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_TLS10_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_TLS10_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_TLS10_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_TLS10_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_TLS10_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_TLS10_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_TLS10_DES_CBC_MD5 0x0022
+
+#define OP_PCL_TLS10_DES40_CBC_SHA 0x0008
+#define OP_PCL_TLS10_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_TLS10_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_TLS10_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_TLS10_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_TLS10_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_TLS10_DES40_CBC_SHA_7 0x0026
+
+
+#define OP_PCL_TLS10_DES_CBC_SHA 0x001e
+#define OP_PCL_TLS10_DES_CBC_SHA_2 0x0009
+#define OP_PCL_TLS10_DES_CBC_SHA_3 0x000c
+#define OP_PCL_TLS10_DES_CBC_SHA_4 0x000f
+#define OP_PCL_TLS10_DES_CBC_SHA_5 0x0012
+#define OP_PCL_TLS10_DES_CBC_SHA_6 0x0015
+#define OP_PCL_TLS10_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_TLS10_RC4_128_MD5 0x0024
+#define OP_PCL_TLS10_RC4_128_MD5_2 0x0004
+#define OP_PCL_TLS10_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_TLS10_RC4_40_MD5 0x002b
+#define OP_PCL_TLS10_RC4_40_MD5_2 0x0003
+#define OP_PCL_TLS10_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_TLS10_RC4_128_SHA 0x0020
+#define OP_PCL_TLS10_RC4_128_SHA_2 0x008a
+#define OP_PCL_TLS10_RC4_128_SHA_3 0x008e
+#define OP_PCL_TLS10_RC4_128_SHA_4 0x0092
+#define OP_PCL_TLS10_RC4_128_SHA_5 0x0005
+#define OP_PCL_TLS10_RC4_128_SHA_6 0xc002
+#define OP_PCL_TLS10_RC4_128_SHA_7 0xc007
+#define OP_PCL_TLS10_RC4_128_SHA_8 0xc00c
+#define OP_PCL_TLS10_RC4_128_SHA_9 0xc011
+#define OP_PCL_TLS10_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_TLS10_RC4_40_SHA 0x0028
+
+#define OP_PCL_TLS10_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_TLS10_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_TLS10_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_TLS10_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_TLS10_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_TLS10_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_TLS10_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_TLS10_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_TLS10_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_TLS10_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_TLS10_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_TLS10_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_TLS10_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_TLS10_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_TLS10_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_TLS10_AES_256_CBC_SHA512 0xff65
+
+
+
+/* For TLS 1.1 - OP_PCLID_TLS11 */
+#define OP_PCL_TLS11_AES_128_CBC_SHA 0x002f
+#define OP_PCL_TLS11_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_TLS11_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_TLS11_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_TLS11_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_TLS11_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_TLS11_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_TLS11_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_TLS11_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_TLS11_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_TLS11_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_TLS11_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_TLS11_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_TLS11_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_TLS11_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_TLS11_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_TLS11_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_TLS11_AES_256_CBC_SHA 0x0035
+#define OP_PCL_TLS11_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_TLS11_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_TLS11_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_TLS11_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_TLS11_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_TLS11_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_TLS11_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_TLS11_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_TLS11_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_TLS11_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_TLS11_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_TLS11_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_TLS11_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_TLS11_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_TLS11_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_TLS11_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_TLS11_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_TLS11_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_TLS11_DES_CBC_MD5 0x0022
+
+#define OP_PCL_TLS11_DES40_CBC_SHA 0x0008
+#define OP_PCL_TLS11_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_TLS11_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_TLS11_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_TLS11_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_TLS11_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_TLS11_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_TLS11_DES_CBC_SHA 0x001e
+#define OP_PCL_TLS11_DES_CBC_SHA_2 0x0009
+#define OP_PCL_TLS11_DES_CBC_SHA_3 0x000c
+#define OP_PCL_TLS11_DES_CBC_SHA_4 0x000f
+#define OP_PCL_TLS11_DES_CBC_SHA_5 0x0012
+#define OP_PCL_TLS11_DES_CBC_SHA_6 0x0015
+#define OP_PCL_TLS11_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_TLS11_RC4_128_MD5 0x0024
+#define OP_PCL_TLS11_RC4_128_MD5_2 0x0004
+#define OP_PCL_TLS11_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_TLS11_RC4_40_MD5 0x002b
+#define OP_PCL_TLS11_RC4_40_MD5_2 0x0003
+#define OP_PCL_TLS11_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_TLS11_RC4_128_SHA 0x0020
+#define OP_PCL_TLS11_RC4_128_SHA_2 0x008a
+#define OP_PCL_TLS11_RC4_128_SHA_3 0x008e
+#define OP_PCL_TLS11_RC4_128_SHA_4 0x0092
+#define OP_PCL_TLS11_RC4_128_SHA_5 0x0005
+#define OP_PCL_TLS11_RC4_128_SHA_6 0xc002
+#define OP_PCL_TLS11_RC4_128_SHA_7 0xc007
+#define OP_PCL_TLS11_RC4_128_SHA_8 0xc00c
+#define OP_PCL_TLS11_RC4_128_SHA_9 0xc011
+#define OP_PCL_TLS11_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_TLS11_RC4_40_SHA 0x0028
+
+#define OP_PCL_TLS11_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_TLS11_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_TLS11_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_TLS11_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_TLS11_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_TLS11_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_TLS11_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_TLS11_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_TLS11_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_TLS11_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_TLS11_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_TLS11_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_TLS11_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_TLS11_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_TLS11_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_TLS11_AES_256_CBC_SHA512 0xff65
+
+
+/* For TLS 1.2 - OP_PCLID_TLS12 */
+#define OP_PCL_TLS12_AES_128_CBC_SHA 0x002f
+#define OP_PCL_TLS12_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_TLS12_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_TLS12_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_TLS12_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_TLS12_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_TLS12_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_TLS12_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_TLS12_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_TLS12_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_TLS12_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_TLS12_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_TLS12_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_TLS12_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_TLS12_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_TLS12_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_TLS12_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_TLS12_AES_256_CBC_SHA 0x0035
+#define OP_PCL_TLS12_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_TLS12_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_TLS12_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_TLS12_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_TLS12_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_TLS12_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_TLS12_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_TLS12_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_TLS12_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_TLS12_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_TLS12_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_TLS12_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_TLS12_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_TLS12_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_TLS12_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_TLS12_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_TLS12_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_TLS12_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_TLS12_DES_CBC_MD5 0x0022
+
+#define OP_PCL_TLS12_DES40_CBC_SHA 0x0008
+#define OP_PCL_TLS12_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_TLS12_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_TLS12_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_TLS12_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_TLS12_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_TLS12_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_TLS12_DES_CBC_SHA 0x001e
+#define OP_PCL_TLS12_DES_CBC_SHA_2 0x0009
+#define OP_PCL_TLS12_DES_CBC_SHA_3 0x000c
+#define OP_PCL_TLS12_DES_CBC_SHA_4 0x000f
+#define OP_PCL_TLS12_DES_CBC_SHA_5 0x0012
+#define OP_PCL_TLS12_DES_CBC_SHA_6 0x0015
+#define OP_PCL_TLS12_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_TLS12_RC4_128_MD5 0x0024
+#define OP_PCL_TLS12_RC4_128_MD5_2 0x0004
+#define OP_PCL_TLS12_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_TLS12_RC4_40_MD5 0x002b
+#define OP_PCL_TLS12_RC4_40_MD5_2 0x0003
+#define OP_PCL_TLS12_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_TLS12_RC4_128_SHA 0x0020
+#define OP_PCL_TLS12_RC4_128_SHA_2 0x008a
+#define OP_PCL_TLS12_RC4_128_SHA_3 0x008e
+#define OP_PCL_TLS12_RC4_128_SHA_4 0x0092
+#define OP_PCL_TLS12_RC4_128_SHA_5 0x0005
+#define OP_PCL_TLS12_RC4_128_SHA_6 0xc002
+#define OP_PCL_TLS12_RC4_128_SHA_7 0xc007
+#define OP_PCL_TLS12_RC4_128_SHA_8 0xc00c
+#define OP_PCL_TLS12_RC4_128_SHA_9 0xc011
+#define OP_PCL_TLS12_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_TLS12_RC4_40_SHA 0x0028
+
+/* #define OP_PCL_TLS12_AES_128_CBC_SHA256 0x003c */
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_2 0x003e
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_3 0x003f
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_4 0x0040
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_5 0x0067
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_6 0x006c
+
+/* #define OP_PCL_TLS12_AES_256_CBC_SHA256 0x003d */
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_2 0x0068
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_3 0x0069
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_4 0x006a
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_5 0x006b
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_6 0x006d
+
+/* AEAD_AES_xxx_CCM/GCM remain to be defined... */
+
+#define OP_PCL_TLS12_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_TLS12_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_TLS12_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_TLS12_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_TLS12_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_TLS12_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_TLS12_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_TLS12_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_TLS12_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_TLS12_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_TLS12_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_TLS12_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_TLS12_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_TLS12_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_TLS12_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_TLS12_AES_256_CBC_SHA512 0xff65
+
+/* For DTLS - OP_PCLID_DTLS */
+
+#define OP_PCL_DTLS_AES_128_CBC_SHA 0x002f
+#define OP_PCL_DTLS_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_DTLS_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_DTLS_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_DTLS_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_DTLS_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_DTLS_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_DTLS_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_DTLS_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_DTLS_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_DTLS_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_DTLS_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_DTLS_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_DTLS_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_DTLS_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_DTLS_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_DTLS_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_DTLS_AES_256_CBC_SHA 0x0035
+#define OP_PCL_DTLS_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_DTLS_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_DTLS_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_DTLS_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_DTLS_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_DTLS_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_DTLS_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_DTLS_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_DTLS_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_DTLS_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_DTLS_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_DTLS_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_DTLS_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_DTLS_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_DTLS_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_DTLS_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_DTLS_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_DTLS_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_DTLS_DES_CBC_MD5 0x0022
+
+#define OP_PCL_DTLS_DES40_CBC_SHA 0x0008
+#define OP_PCL_DTLS_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_DTLS_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_DTLS_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_DTLS_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_DTLS_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_DTLS_DES40_CBC_SHA_7 0x0026
+
+
+#define OP_PCL_DTLS_DES_CBC_SHA 0x001e
+#define OP_PCL_DTLS_DES_CBC_SHA_2 0x0009
+#define OP_PCL_DTLS_DES_CBC_SHA_3 0x000c
+#define OP_PCL_DTLS_DES_CBC_SHA_4 0x000f
+#define OP_PCL_DTLS_DES_CBC_SHA_5 0x0012
+#define OP_PCL_DTLS_DES_CBC_SHA_6 0x0015
+#define OP_PCL_DTLS_DES_CBC_SHA_7 0x001a
+
+
+#define OP_PCL_DTLS_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_DTLS_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_DTLS_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_DTLS_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_DTLS_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_DTLS_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_DTLS_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_DTLS_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_DTLS_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_DTLS_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_DTLS_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_DTLS_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_DTLS_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_DTLS_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_DTLS_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_DTLS_AES_256_CBC_SHA512 0xff65
+
+/* 802.16 WiMAX protinfos */
+#define OP_PCL_WIMAX_OFDM 0x0201
+#define OP_PCL_WIMAX_OFDMA 0x0231
+
+/* 802.11 WiFi protinfos */
+#define OP_PCL_WIFI 0xac04
+
+/* MacSec protinfos */
+#define OP_PCL_MACSEC 0x0001
+
+/* PKI unidirectional protocol protinfo bits */
+#define OP_PCL_PKPROT_TEST 0x0008
+#define OP_PCL_PKPROT_DECRYPT 0x0004
+#define OP_PCL_PKPROT_ECC 0x0002
+#define OP_PCL_PKPROT_F2M 0x0001
+
+/* For non-protocol/alg-only op commands */
+#define OP_ALG_TYPE_SHIFT 24
+#define OP_ALG_TYPE_MASK (0x7 << OP_ALG_TYPE_SHIFT)
+#define OP_ALG_TYPE_CLASS1 2
+#define OP_ALG_TYPE_CLASS2 4
+
+#define OP_ALG_ALGSEL_SHIFT 16
+#define OP_ALG_ALGSEL_MASK (0xff << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SUBMASK (0x0f << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_AES (0x10 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_DES (0x20 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_3DES (0x21 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_ARC4 (0x30 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_MD5 (0x40 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA1 (0x41 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA224 (0x42 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA256 (0x43 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA384 (0x44 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA512 (0x45 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_RNG (0x50 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SNOW (0x60 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SNOW_F8 (0x60 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_KASUMI (0x70 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_CRC (0x90 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SNOW_F9 (0xA0 << OP_ALG_ALGSEL_SHIFT)
+
+#define OP_ALG_AAI_SHIFT 4
+#define OP_ALG_AAI_MASK (0x1ff << OP_ALG_AAI_SHIFT)
+
+/* blockcipher AAI set */
+#define OP_ALG_AAI_CTR_MOD128 (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD8 (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD16 (0x02 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD24 (0x03 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD32 (0x04 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD40 (0x05 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD48 (0x06 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD56 (0x07 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD64 (0x08 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD72 (0x09 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD80 (0x0a << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD88 (0x0b << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD96 (0x0c << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD104 (0x0d << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD112 (0x0e << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD120 (0x0f << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CBC (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_ECB (0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CFB (0x30 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_OFB (0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_XTS (0x50 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CMAC (0x60 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_XCBC_MAC (0x70 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CCM (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_GCM (0x90 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CBC_XCBCMAC (0xa0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_XCBCMAC (0xb0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CHECKODD (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DK (0x100 << OP_ALG_AAI_SHIFT)
+
+/* randomizer AAI set */
+#define OP_ALG_AAI_RNG (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_NOZERO (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_ODD (0x20 << OP_ALG_AAI_SHIFT)
+
+/* hmac/smac AAI set */
+#define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_HMAC (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_SMAC (0x02 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_HMAC_PRECOMP (0x04 << OP_ALG_AAI_SHIFT)
+
+/* CRC AAI set*/
+#define OP_ALG_AAI_802 (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_3385 (0x02 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CUST_POLY (0x04 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DIS (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DOS (0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DOC (0x40 << OP_ALG_AAI_SHIFT)
+
+/* Kasumi/SNOW AAI set */
+#define OP_ALG_AAI_F8 (0xc0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_F9 (0xc8 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_GSM (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_EDGE (0x20 << OP_ALG_AAI_SHIFT)
+
+
+#define OP_ALG_AS_SHIFT 2
+#define OP_ALG_AS_MASK (0x3 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_UPDATE (0 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_INIT (1 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_FINALIZE (2 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_INITFINAL (3 << OP_ALG_AS_SHIFT)
+
+#define OP_ALG_ICV_SHIFT 1
+#define OP_ALG_ICV_MASK (1 << OP_ALG_ICV_SHIFT)
+#define OP_ALG_ICV_OFF (0 << OP_ALG_ICV_SHIFT)
+#define OP_ALG_ICV_ON (1 << OP_ALG_ICV_SHIFT)
+
+#define OP_ALG_DIR_SHIFT 0
+#define OP_ALG_DIR_MASK 1
+#define OP_ALG_DECRYPT 0
+#define OP_ALG_ENCRYPT 1
+
+/* PKHA algorithm type set */
+#define OP_ALG_PK 0x00800000
+#define OP_ALG_PK_FUN_MASK 0x3f /* clrmem, modmath, or cpymem */
+
+/* PKHA mode clear memory functions */
+#define OP_ALG_PKMODE_A_RAM 0x80000
+#define OP_ALG_PKMODE_B_RAM 0x40000
+#define OP_ALG_PKMODE_E_RAM 0x20000
+#define OP_ALG_PKMODE_N_RAM 0x10000
+#define OP_ALG_PKMODE_CLEARMEM 0x00001
+
+/* PKHA mode modular-arithmetic functions */
+#define OP_ALG_PKMODE_MOD_IN_MONTY 0x80000
+#define OP_ALG_PKMODE_MOD_OUT_MONTY 0x40000
+#define OP_ALG_PKMODE_MOD_F2M 0x20000
+#define OP_ALG_PKMODE_MOD_R2_IN 0x10000
+#define OP_ALG_PKMODE_PRJECTV 0x00800
+#define OP_ALG_PKMODE_TIME_EQ 0x400
+#define OP_ALG_PKMODE_OUT_B 0x000
+#define OP_ALG_PKMODE_OUT_A 0x100
+#define OP_ALG_PKMODE_MOD_ADD 0x002
+#define OP_ALG_PKMODE_MOD_SUB_AB 0x003
+#define OP_ALG_PKMODE_MOD_SUB_BA 0x004
+#define OP_ALG_PKMODE_MOD_MULT 0x005
+#define OP_ALG_PKMODE_MOD_EXPO 0x006
+#define OP_ALG_PKMODE_MOD_REDUCT 0x007
+#define OP_ALG_PKMODE_MOD_INV 0x008
+#define OP_ALG_PKMODE_MOD_ECC_ADD 0x009
+#define OP_ALG_PKMODE_MOD_ECC_DBL 0x00a
+#define OP_ALG_PKMODE_MOD_ECC_MULT 0x00b
+#define OP_ALG_PKMODE_MOD_MONT_CNST 0x00c
+#define OP_ALG_PKMODE_MOD_CRT_CNST 0x00d
+#define OP_ALG_PKMODE_MOD_GCD 0x00e
+#define OP_ALG_PKMODE_MOD_PRIMALITY 0x00f
+
+/* PKHA mode copy-memory functions */
+#define OP_ALG_PKMODE_SRC_REG_SHIFT 13
+#define OP_ALG_PKMODE_SRC_REG_MASK (7 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_SHIFT 10
+#define OP_ALG_PKMODE_DST_REG_MASK (7 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_SHIFT 8
+#define OP_ALG_PKMODE_SRC_SEG_MASK (3 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_SHIFT 6
+#define OP_ALG_PKMODE_DST_SEG_MASK (3 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+
+#define OP_ALG_PKMODE_SRC_REG_A (0 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_REG_B (1 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_REG_N (3 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_A (0 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_B (1 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_E (2 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_N (3 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_0 (0 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_1 (1 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_2 (2 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_3 (3 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_0 (0 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_1 (1 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_2 (2 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_3 (3 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_CPYMEM_N_SZ 0x80
+#define OP_ALG_PKMODE_CPYMEM_SRC_SZ 0x81
+
+/*
+ * SEQ_IN_PTR Command Constructs
+ */
+
+/* Release Buffers */
+#define SQIN_RBS 0x04000000
+
+/* Sequence pointer is really a descriptor */
+#define SQIN_INL 0x02000000
+
+/* Sequence pointer is a scatter-gather table */
+#define SQIN_SGF 0x01000000
+
+/* Appends to a previous pointer */
+#define SQIN_PRE 0x00800000
+
+/* Use extended length following pointer */
+#define SQIN_EXT 0x00400000
+
+/* Restore sequence with pointer/length */
+#define SQIN_RTO 0x00200000
+
+/* Replace job descriptor */
+#define SQIN_RJD 0x00100000
+
+#define SQIN_LEN_SHIFT 0
+#define SQIN_LEN_MASK (0xffff << SQIN_LEN_SHIFT)
+
+/*
+ * SEQ_OUT_PTR Command Constructs
+ */
+
+/* Sequence pointer is a scatter-gather table */
+#define SQOUT_SGF 0x01000000
+
+/* Appends to a previous pointer */
+#define SQOUT_PRE 0x00800000
+
+/* Restore sequence with pointer/length */
+#define SQOUT_RTO 0x00200000
+
+/* Use extended length following pointer */
+#define SQOUT_EXT 0x00400000
+
+#define SQOUT_LEN_SHIFT 0
+#define SQOUT_LEN_MASK (0xffff << SQOUT_LEN_SHIFT)
+
+
+/*
+ * SIGNATURE Command Constructs
+ */
+
+/* TYPE field is all that's relevant */
+#define SIGN_TYPE_SHIFT 16
+#define SIGN_TYPE_MASK (0x0f << SIGN_TYPE_SHIFT)
+
+#define SIGN_TYPE_FINAL (0x00 << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_FINAL_RESTORE (0x01 << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_FINAL_NONZERO (0x02 << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_IMM_2 (0x0a << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_IMM_3 (0x0b << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_IMM_4 (0x0c << SIGN_TYPE_SHIFT)
+
+/*
+ * MOVE Command Constructs
+ */
+
+#define MOVE_AUX_SHIFT 25
+#define MOVE_AUX_MASK (3 << MOVE_AUX_SHIFT)
+#define MOVE_AUX_MS (2 << MOVE_AUX_SHIFT)
+#define MOVE_AUX_LS (1 << MOVE_AUX_SHIFT)
+
+#define MOVE_WAITCOMP_SHIFT 24
+#define MOVE_WAITCOMP_MASK (1 << MOVE_WAITCOMP_SHIFT)
+#define MOVE_WAITCOMP (1 << MOVE_WAITCOMP_SHIFT)
+
+#define MOVE_SRC_SHIFT 20
+#define MOVE_SRC_MASK (0x0f << MOVE_SRC_SHIFT)
+#define MOVE_SRC_CLASS1CTX (0x00 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_CLASS2CTX (0x01 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_OUTFIFO (0x02 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_DESCBUF (0x03 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH0 (0x04 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH1 (0x05 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH2 (0x06 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH3 (0x07 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_INFIFO (0x08 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_INFIFO_CL (0x09 << MOVE_SRC_SHIFT)
+
+#define MOVE_DEST_SHIFT 16
+#define MOVE_DEST_MASK (0x0f << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS1CTX (0x00 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS2CTX (0x01 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_OUTFIFO (0x02 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_DESCBUF (0x03 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH0 (0x04 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH1 (0x05 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH2 (0x06 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH3 (0x07 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS1INFIFO (0x08 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS2INFIFO (0x09 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_PK_A (0x0c << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS1KEY (0x0d << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS2KEY (0x0e << MOVE_DEST_SHIFT)
+
+#define MOVE_OFFSET_SHIFT 8
+#define MOVE_OFFSET_MASK (0xff << MOVE_OFFSET_SHIFT)
+
+#define MOVE_LEN_SHIFT 0
+#define MOVE_LEN_MASK (0xff << MOVE_LEN_SHIFT)
+
+#define MOVELEN_MRSEL_SHIFT 0
+#define MOVELEN_MRSEL_MASK (0x3 << MOVE_LEN_SHIFT)
+
+/*
+ * MATH Command Constructs
+ */
+
+#define MATH_IFB_SHIFT 26
+#define MATH_IFB_MASK (1 << MATH_IFB_SHIFT)
+#define MATH_IFB (1 << MATH_IFB_SHIFT)
+
+#define MATH_NFU_SHIFT 25
+#define MATH_NFU_MASK (1 << MATH_NFU_SHIFT)
+#define MATH_NFU (1 << MATH_NFU_SHIFT)
+
+#define MATH_STL_SHIFT 24
+#define MATH_STL_MASK (1 << MATH_STL_SHIFT)
+#define MATH_STL (1 << MATH_STL_SHIFT)
+
+/* Function selectors */
+#define MATH_FUN_SHIFT 20
+#define MATH_FUN_MASK (0x0f << MATH_FUN_SHIFT)
+#define MATH_FUN_ADD (0x00 << MATH_FUN_SHIFT)
+#define MATH_FUN_ADDC (0x01 << MATH_FUN_SHIFT)
+#define MATH_FUN_SUB (0x02 << MATH_FUN_SHIFT)
+#define MATH_FUN_SUBB (0x03 << MATH_FUN_SHIFT)
+#define MATH_FUN_OR (0x04 << MATH_FUN_SHIFT)
+#define MATH_FUN_AND (0x05 << MATH_FUN_SHIFT)
+#define MATH_FUN_XOR (0x06 << MATH_FUN_SHIFT)
+#define MATH_FUN_LSHIFT (0x07 << MATH_FUN_SHIFT)
+#define MATH_FUN_RSHIFT (0x08 << MATH_FUN_SHIFT)
+#define MATH_FUN_SHLD (0x09 << MATH_FUN_SHIFT)
+#define MATH_FUN_ZBYT (0x0a << MATH_FUN_SHIFT)
+
+/* Source 0 selectors */
+#define MATH_SRC0_SHIFT 16
+#define MATH_SRC0_MASK (0x0f << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG0 (0x00 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG1 (0x01 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG2 (0x02 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG3 (0x03 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_IMM (0x04 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_SEQINLEN (0x08 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_SEQOUTLEN (0x09 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_VARSEQINLEN (0x0a << MATH_SRC0_SHIFT)
+#define MATH_SRC0_VARSEQOUTLEN (0x0b << MATH_SRC0_SHIFT)
+#define MATH_SRC0_ZERO (0x0c << MATH_SRC0_SHIFT)
+
+/* Source 1 selectors */
+#define MATH_SRC1_SHIFT 12
+#define MATH_SRC1_MASK (0x0f << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG0 (0x00 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG1 (0x01 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG2 (0x02 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG3 (0x03 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_IMM (0x04 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_INFIFO (0x0a << MATH_SRC1_SHIFT)
+#define MATH_SRC1_OUTFIFO (0x0b << MATH_SRC1_SHIFT)
+#define MATH_SRC1_ONE (0x0c << MATH_SRC1_SHIFT)
+
+/* Destination selectors */
+#define MATH_DEST_SHIFT 8
+#define MATH_DEST_MASK (0x0f << MATH_DEST_SHIFT)
+#define MATH_DEST_REG0 (0x00 << MATH_DEST_SHIFT)
+#define MATH_DEST_REG1 (0x01 << MATH_DEST_SHIFT)
+#define MATH_DEST_REG2 (0x02 << MATH_DEST_SHIFT)
+#define MATH_DEST_REG3 (0x03 << MATH_DEST_SHIFT)
+#define MATH_DEST_SEQINLEN (0x08 << MATH_DEST_SHIFT)
+#define MATH_DEST_SEQOUTLEN (0x09 << MATH_DEST_SHIFT)
+#define MATH_DEST_VARSEQINLEN (0x0a << MATH_DEST_SHIFT)
+#define MATH_DEST_VARSEQOUTLEN (0x0b << MATH_DEST_SHIFT)
+#define MATH_DEST_NONE (0x0f << MATH_DEST_SHIFT)
+
+/* Length selectors */
+#define MATH_LEN_SHIFT 0
+#define MATH_LEN_MASK (0x0f << MATH_LEN_SHIFT)
+#define MATH_LEN_1BYTE 0x01
+#define MATH_LEN_2BYTE 0x02
+#define MATH_LEN_4BYTE 0x04
+#define MATH_LEN_8BYTE 0x08
+
+/*
+ * JUMP Command Constructs
+ */
+
+#define JUMP_CLASS_SHIFT 25
+#define JUMP_CLASS_MASK (3 << JUMP_CLASS_SHIFT)
+#define JUMP_CLASS_NONE 0
+#define JUMP_CLASS_CLASS1 (1 << JUMP_CLASS_SHIFT)
+#define JUMP_CLASS_CLASS2 (2 << JUMP_CLASS_SHIFT)
+#define JUMP_CLASS_BOTH (3 << JUMP_CLASS_SHIFT)
+
+#define JUMP_JSL_SHIFT 24
+#define JUMP_JSL_MASK (1 << JUMP_JSL_SHIFT)
+#define JUMP_JSL (1 << JUMP_JSL_SHIFT)
+
+#define JUMP_TYPE_SHIFT 22
+#define JUMP_TYPE_MASK (0x03 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_LOCAL (0x00 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_NONLOCAL (0x01 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_HALT (0x02 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_HALT_USER (0x03 << JUMP_TYPE_SHIFT)
+
+#define JUMP_TEST_SHIFT 16
+#define JUMP_TEST_MASK (0x03 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_ALL (0x00 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_INVALL (0x01 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_ANY (0x02 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_INVANY (0x03 << JUMP_TEST_SHIFT)
+
+/* Condition codes. JSL bit is factored in */
+#define JUMP_COND_SHIFT 8
+#define JUMP_COND_MASK (0x100ff << JUMP_COND_SHIFT)
+#define JUMP_COND_PK_0 (0x80 << JUMP_COND_SHIFT)
+#define JUMP_COND_PK_GCD_1 (0x40 << JUMP_COND_SHIFT)
+#define JUMP_COND_PK_PRIME (0x20 << JUMP_COND_SHIFT)
+#define JUMP_COND_MATH_N (0x08 << JUMP_COND_SHIFT)
+#define JUMP_COND_MATH_Z (0x04 << JUMP_COND_SHIFT)
+#define JUMP_COND_MATH_C (0x02 << JUMP_COND_SHIFT)
+#define JUMP_COND_MATH_NV (0x01 << JUMP_COND_SHIFT)
+
+#define JUMP_COND_JRP ((0x80 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_SHRD ((0x40 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_SELF ((0x20 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_CALM ((0x10 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_NIP ((0x08 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_NIFP ((0x04 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_NOP ((0x02 << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_NCP ((0x01 << JUMP_COND_SHIFT) | JUMP_JSL)
+
+#define JUMP_OFFSET_SHIFT 0
+#define JUMP_OFFSET_MASK (0xff << JUMP_OFFSET_SHIFT)
+
+/*
+ * NFIFO ENTRY
+ * Data Constructs
+ *
+ */
+#define NFIFOENTRY_DEST_SHIFT 30
+#define NFIFOENTRY_DEST_MASK (3 << NFIFOENTRY_DEST_SHIFT)
+#define NFIFOENTRY_DEST_DECO (0 << NFIFOENTRY_DEST_SHIFT)
+#define NFIFOENTRY_DEST_CLASS1 (1 << NFIFOENTRY_DEST_SHIFT)
+#define NFIFOENTRY_DEST_CLASS2 (2 << NFIFOENTRY_DEST_SHIFT)
+#define NFIFOENTRY_DEST_BOTH (3 << NFIFOENTRY_DEST_SHIFT)
+
+#define NFIFOENTRY_LC2_SHIFT 29
+#define NFIFOENTRY_LC2_MASK (1 << NFIFOENTRY_LC2_SHIFT)
+#define NFIFOENTRY_LC2 (1 << NFIFOENTRY_LC2_SHIFT)
+
+#define NFIFOENTRY_LC1_SHIFT 28
+#define NFIFOENTRY_LC1_MASK (1 << NFIFOENTRY_LC1_SHIFT)
+#define NFIFOENTRY_LC1 (1 << NFIFOENTRY_LC1_SHIFT)
+
+#define NFIFOENTRY_FC2_SHIFT 27
+#define NFIFOENTRY_FC2_MASK (1 << NFIFOENTRY_FC2_SHIFT)
+#define NFIFOENTRY_FC2 (1 << NFIFOENTRY_FC2_SHIFT)
+
+#define NFIFOENTRY_FC1_SHIFT 26
+#define NFIFOENTRY_FC1_MASK (1 << NFIFOENTRY_FC1_SHIFT)
+#define NFIFOENTRY_FC1 (1 << NFIFOENTRY_FC1_SHIFT)
+
+#define NFIFOENTRY_STYPE_SHIFT 24
+#define NFIFOENTRY_STYPE_MASK (3 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_DFIFO (0 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_OFIFO (1 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_PAD (2 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_SNOOP (3 << NFIFOENTRY_STYPE_SHIFT)
+
+#define NFIFOENTRY_DTYPE_SHIFT 20
+#define NFIFOENTRY_DTYPE_MASK (0xF << NFIFOENTRY_DTYPE_SHIFT)
+
+#define NFIFOENTRY_DTYPE_SBOX (0x0 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_AAD (0x1 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_IV (0x2 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_SAD (0x3 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_ICV (0xA << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_SKIP (0xE << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_MSG (0xF << NFIFOENTRY_DTYPE_SHIFT)
+
+#define NFIFOENTRY_DTYPE_PK_A0 (0x0 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A1 (0x1 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A2 (0x2 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A3 (0x3 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B0 (0x4 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B1 (0x5 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B2 (0x6 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B3 (0x7 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_N (0x8 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_E (0x9 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A (0xC << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B (0xD << NFIFOENTRY_DTYPE_SHIFT)
+
+
+#define NFIFOENTRY_BND_SHIFT 19
+#define NFIFOENTRY_BND_MASK (1 << NFIFOENTRY_BND_SHIFT)
+#define NFIFOENTRY_BND (1 << NFIFOENTRY_BND_SHIFT)
+
+#define NFIFOENTRY_PTYPE_SHIFT 16
+#define NFIFOENTRY_PTYPE_MASK (0x7 << NFIFOENTRY_PTYPE_SHIFT)
+
+#define NFIFOENTRY_PTYPE_ZEROS (0x0 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND_NOZEROS (0x1 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_INCREMENT (0x2 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND (0x3 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_ZEROS_NZ (0x4 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND_NZ_LZ (0x5 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_N (0x6 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND_NZ_N (0x7 << NFIFOENTRY_PTYPE_SHIFT)
+
+#define NFIFOENTRY_OC_SHIFT 15
+#define NFIFOENTRY_OC_MASK (1 << NFIFOENTRY_OC_SHIFT)
+#define NFIFOENTRY_OC (1 << NFIFOENTRY_OC_SHIFT)
+
+#define NFIFOENTRY_AST_SHIFT 14
+#define NFIFOENTRY_AST_MASK (1 << NFIFOENTRY_OC_SHIFT)
+#define NFIFOENTRY_AST (1 << NFIFOENTRY_OC_SHIFT)
+
+#define NFIFOENTRY_BM_SHIFT 11
+#define NFIFOENTRY_BM_MASK (1 << NFIFOENTRY_BM_SHIFT)
+#define NFIFOENTRY_BM (1 << NFIFOENTRY_BM_SHIFT)
+
+#define NFIFOENTRY_PS_SHIFT 10
+#define NFIFOENTRY_PS_MASK (1 << NFIFOENTRY_PS_SHIFT)
+#define NFIFOENTRY_PS (1 << NFIFOENTRY_PS_SHIFT)
+
+
+#define NFIFOENTRY_DLEN_SHIFT 0
+#define NFIFOENTRY_DLEN_MASK (0xFFF << NFIFOENTRY_DLEN_SHIFT)
+
+#define NFIFOENTRY_PLEN_SHIFT 0
+#define NFIFOENTRY_PLEN_MASK (0xFF << NFIFOENTRY_PLEN_SHIFT)
+
+/*
+ * PDB internal definitions
+ */
+
+/* IPSec ESP CBC Encap/Decap Options */
+#define PDBOPTS_ESPCBC_ARSNONE 0x00 /* no antireplay window */
+#define PDBOPTS_ESPCBC_ARS32 0x40 /* 32-entry antireplay window */
+#define PDBOPTS_ESPCBC_ARS64 0xc0 /* 64-entry antireplay window */
+#define PDBOPTS_ESPCBC_IVSRC 0x20 /* IV comes from internal random gen */
+#define PDBOPTS_ESPCBC_ESN 0x10 /* extended sequence included */
+#define PDBOPTS_ESPCBC_OUTFMT 0x08 /* output only decapsulation (decap) */
+#define PDBOPTS_ESPCBC_IPHDRSRC 0x08 /* IP header comes from PDB (encap) */
+#define PDBOPTS_ESPCBC_INCIPHDR 0x04 /* Prepend IP header to output frame */
+#define PDBOPTS_ESPCBC_IPVSN 0x02 /* process IPv6 header */
+#define PDBOPTS_ESPCBC_TUNNEL 0x01 /* tunnel mode next-header byte */
+
+#endif /* DESC_H */
diff --git a/drivers/crypto/caam/desc_constr.h b/drivers/crypto/caam/desc_constr.h
new file mode 100644
index 0000000..4691580
--- /dev/null
+++ b/drivers/crypto/caam/desc_constr.h
@@ -0,0 +1,205 @@
+/*
+ * caam descriptor construction helper functions
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#include "desc.h"
+
+#define IMMEDIATE (1 << 23)
+#define CAAM_CMD_SZ sizeof(u32)
+#define CAAM_PTR_SZ sizeof(dma_addr_t)
+#define CAAM_DESC_BYTES_MAX (CAAM_CMD_SZ * 64)
+
+#ifdef DEBUG
+#define PRINT_POS do { printk(KERN_DEBUG "%02d: %s\n", desc_len(desc),\
+ &__func__[sizeof("append")]); } while (0)
+#else
+#define PRINT_POS
+#endif
+
+#define DISABLE_AUTO_INFO_FIFO (IMMEDIATE | LDST_CLASS_DECO | \
+ LDST_SRCDST_WORD_DECOCTRL | \
+ (LDOFF_DISABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT))
+#define ENABLE_AUTO_INFO_FIFO (IMMEDIATE | LDST_CLASS_DECO | \
+ LDST_SRCDST_WORD_DECOCTRL | \
+ (LDOFF_ENABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT))
+
+static inline int desc_len(u32 *desc)
+{
+ return *desc & HDR_DESCLEN_MASK;
+}
+
+static inline int desc_bytes(void *desc)
+{
+ return desc_len(desc) * CAAM_CMD_SZ;
+}
+
+static inline u32 *desc_end(u32 *desc)
+{
+ return desc + desc_len(desc);
+}
+
+static inline void *sh_desc_pdb(u32 *desc)
+{
+ return desc + 1;
+}
+
+static inline void init_desc(u32 *desc, u32 options)
+{
+ *desc = options | HDR_ONE | 1;
+}
+
+static inline void init_sh_desc(u32 *desc, u32 options)
+{
+ PRINT_POS;
+ init_desc(desc, CMD_SHARED_DESC_HDR | options);
+}
+
+static inline void init_sh_desc_pdb(u32 *desc, u32 options, size_t pdb_bytes)
+{
+ u32 pdb_len = pdb_bytes / CAAM_CMD_SZ + 1;
+
+ init_sh_desc(desc, ((pdb_len << HDR_START_IDX_SHIFT) + pdb_len) |
+ options);
+}
+
+static inline void init_job_desc(u32 *desc, u32 options)
+{
+ init_desc(desc, CMD_DESC_HDR | options);
+}
+
+static inline void append_ptr(u32 *desc, dma_addr_t ptr)
+{
+ dma_addr_t *offset = (dma_addr_t *)desc_end(desc);
+
+ *offset = ptr;
+
+ (*desc) += CAAM_PTR_SZ / CAAM_CMD_SZ;
+}
+
+static inline void init_job_desc_shared(u32 *desc, dma_addr_t ptr, int len,
+ u32 options)
+{
+ PRINT_POS;
+ init_job_desc(desc, HDR_SHARED | options |
+ (len << HDR_START_IDX_SHIFT));
+ append_ptr(desc, ptr);
+}
+
+static inline void append_data(u32 *desc, void *data, int len)
+{
+ u32 *offset = desc_end(desc);
+
+ if (len) /* avoid sparse warning: memcpy with byte count of 0 */
+ memcpy(offset, data, len);
+
+ (*desc) += (len + CAAM_CMD_SZ - 1) / CAAM_CMD_SZ;
+}
+
+static inline void append_cmd(u32 *desc, u32 command)
+{
+ u32 *cmd = desc_end(desc);
+
+ *cmd = command;
+
+ (*desc)++;
+}
+
+static inline void append_cmd_ptr(u32 *desc, dma_addr_t ptr, int len,
+ u32 command)
+{
+ append_cmd(desc, command | len);
+ append_ptr(desc, ptr);
+}
+
+static inline void append_cmd_data(u32 *desc, void *data, int len,
+ u32 command)
+{
+ append_cmd(desc, command | IMMEDIATE | len);
+ append_data(desc, data, len);
+}
+
+static inline u32 *append_jump(u32 *desc, u32 options)
+{
+ u32 *cmd = desc_end(desc);
+
+ PRINT_POS;
+ append_cmd(desc, CMD_JUMP | options);
+
+ return cmd;
+}
+
+static inline void set_jump_tgt_here(u32 *desc, u32 *jump_cmd)
+{
+ *jump_cmd = *jump_cmd | (desc_len(desc) - (jump_cmd - desc));
+}
+
+#define APPEND_CMD(cmd, op) \
+static inline void append_##cmd(u32 *desc, u32 options) \
+{ \
+ PRINT_POS; \
+ append_cmd(desc, CMD_##op | options); \
+}
+APPEND_CMD(operation, OPERATION)
+APPEND_CMD(move, MOVE)
+
+#define APPEND_CMD_LEN(cmd, op) \
+static inline void append_##cmd(u32 *desc, unsigned int len, u32 options) \
+{ \
+ PRINT_POS; \
+ append_cmd(desc, CMD_##op | len | options); \
+}
+APPEND_CMD_LEN(seq_store, SEQ_STORE)
+APPEND_CMD_LEN(seq_fifo_load, SEQ_FIFO_LOAD)
+APPEND_CMD_LEN(seq_fifo_store, SEQ_FIFO_STORE)
+
+#define APPEND_CMD_PTR(cmd, op) \
+static inline void append_##cmd(u32 *desc, dma_addr_t ptr, unsigned int len, \
+ u32 options) \
+{ \
+ PRINT_POS; \
+ append_cmd_ptr(desc, ptr, len, CMD_##op | options); \
+}
+APPEND_CMD_PTR(key, KEY)
+APPEND_CMD_PTR(seq_in_ptr, SEQ_IN_PTR)
+APPEND_CMD_PTR(seq_out_ptr, SEQ_OUT_PTR)
+APPEND_CMD_PTR(load, LOAD)
+APPEND_CMD_PTR(store, STORE)
+APPEND_CMD_PTR(fifo_load, FIFO_LOAD)
+APPEND_CMD_PTR(fifo_store, FIFO_STORE)
+
+#define APPEND_CMD_PTR_TO_IMM(cmd, op) \
+static inline void append_##cmd##_as_imm(u32 *desc, void *data, \
+ unsigned int len, u32 options) \
+{ \
+ PRINT_POS; \
+ append_cmd_data(desc, data, len, CMD_##op | options); \
+}
+APPEND_CMD_PTR_TO_IMM(load, LOAD);
+APPEND_CMD_PTR_TO_IMM(fifo_load, FIFO_LOAD);
+
+/*
+ * 2nd variant for commands whose specified immediate length differs
+ * from length of immediate data provided, e.g., split keys
+ */
+#define APPEND_CMD_PTR_TO_IMM2(cmd, op) \
+static inline void append_##cmd##_as_imm(u32 *desc, void *data, \
+ unsigned int data_len, \
+ unsigned int len, u32 options) \
+{ \
+ PRINT_POS; \
+ append_cmd(desc, CMD_##op | IMMEDIATE | len | options); \
+ append_data(desc, data, data_len); \
+}
+APPEND_CMD_PTR_TO_IMM2(key, KEY);
+
+#define APPEND_CMD_RAW_IMM(cmd, op, type) \
+static inline void append_##cmd##_imm_##type(u32 *desc, type immediate, \
+ u32 options) \
+{ \
+ PRINT_POS; \
+ append_cmd(desc, CMD_##op | IMMEDIATE | options | sizeof(type)); \
+ append_cmd(desc, immediate); \
+}
+APPEND_CMD_RAW_IMM(load, LOAD, u32);
diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c
new file mode 100644
index 0000000..7e2d54b
--- /dev/null
+++ b/drivers/crypto/caam/error.c
@@ -0,0 +1,248 @@
+/*
+ * CAAM Error Reporting
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ */
+
+#include "compat.h"
+#include "regs.h"
+#include "intern.h"
+#include "desc.h"
+#include "jr.h"
+#include "error.h"
+
+#define SPRINTFCAT(str, format, param, max_alloc) \
+{ \
+ char *tmp; \
+ \
+ tmp = kmalloc(sizeof(format) + max_alloc, GFP_ATOMIC); \
+ sprintf(tmp, format, param); \
+ strcat(str, tmp); \
+ kfree(tmp); \
+}
+
+static void report_jump_idx(u32 status, char *outstr)
+{
+ u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
+ JRSTA_DECOERR_INDEX_SHIFT;
+
+ if (status & JRSTA_DECOERR_JUMP)
+ strcat(outstr, "jump tgt desc idx ");
+ else
+ strcat(outstr, "desc idx ");
+
+ SPRINTFCAT(outstr, "%d: ", idx, sizeof("255"));
+}
+
+static void report_ccb_status(u32 status, char *outstr)
+{
+ char *cha_id_list[] = {
+ "",
+ "AES",
+ "DES, 3DES",
+ "ARC4",
+ "MD5, SHA-1, SH-224, SHA-256, SHA-384, SHA-512",
+ "RNG",
+ "SNOW f8",
+ "Kasumi f8, f9",
+ "All Public Key Algorithms",
+ "CRC",
+ "SNOW f9",
+ };
+ char *err_id_list[] = {
+ "None. No error.",
+ "Mode error.",
+ "Data size error.",
+ "Key size error.",
+ "PKHA A memory size error.",
+ "PKHA B memory size error.",
+ "Data arrived out of sequence error.",
+ "PKHA divide-by-zero error.",
+ "PKHA modulus even error.",
+ "DES key parity error.",
+ "ICV check failed.",
+ "Hardware error.",
+ "Unsupported CCM AAD size.",
+ "Class 1 CHA is not reset",
+ "Invalid CHA combination was selected",
+ "Invalid CHA selected.",
+ };
+ u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
+ JRSTA_CCBERR_CHAID_SHIFT;
+ u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
+
+ report_jump_idx(status, outstr);
+
+ if (cha_id < ARRAY_SIZE(cha_id_list)) {
+ SPRINTFCAT(outstr, "%s: ", cha_id_list[cha_id],
+ strlen(cha_id_list[cha_id]));
+ } else {
+ SPRINTFCAT(outstr, "unidentified cha_id value 0x%02x: ",
+ cha_id, sizeof("ff"));
+ }
+
+ if (err_id < ARRAY_SIZE(err_id_list)) {
+ SPRINTFCAT(outstr, "%s", err_id_list[err_id],
+ strlen(err_id_list[err_id]));
+ } else {
+ SPRINTFCAT(outstr, "unidentified err_id value 0x%02x",
+ err_id, sizeof("ff"));
+ }
+}
+
+static void report_jump_status(u32 status, char *outstr)
+{
+ SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
+}
+
+static void report_deco_status(u32 status, char *outstr)
+{
+ const struct {
+ u8 value;
+ char *error_text;
+ } desc_error_list[] = {
+ { 0x00, "None. No error." },
+ { 0x01, "SGT Length Error. The descriptor is trying to read "
+ "more data than is contained in the SGT table." },
+ { 0x02, "Reserved." },
+ { 0x03, "Job Ring Control Error. There is a bad value in the "
+ "Job Ring Control register." },
+ { 0x04, "Invalid Descriptor Command. The Descriptor Command "
+ "field is invalid." },
+ { 0x05, "Reserved." },
+ { 0x06, "Invalid KEY Command" },
+ { 0x07, "Invalid LOAD Command" },
+ { 0x08, "Invalid STORE Command" },
+ { 0x09, "Invalid OPERATION Command" },
+ { 0x0A, "Invalid FIFO LOAD Command" },
+ { 0x0B, "Invalid FIFO STORE Command" },
+ { 0x0C, "Invalid MOVE Command" },
+ { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is "
+ "invalid because the target is not a Job Header "
+ "Command, or the jump is from a Trusted Descriptor to "
+ "a Job Descriptor, or because the target Descriptor "
+ "contains a Shared Descriptor." },
+ { 0x0E, "Invalid MATH Command" },
+ { 0x0F, "Invalid SIGNATURE Command" },
+ { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR "
+ "Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO "
+ "LOAD, or SEQ FIFO STORE decremented the input or "
+ "output sequence length below 0. This error may result "
+ "if a built-in PROTOCOL Command has encountered a "
+ "malformed PDU." },
+ { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
+ { 0x12, "Shared Descriptor Header Error" },
+ { 0x13, "Header Error. Invalid length or parity, or certain "
+ "other problems." },
+ { 0x14, "Burster Error. Burster has gotten to an illegal "
+ "state" },
+ { 0x15, "Context Register Length Error. The descriptor is "
+ "trying to read or write past the end of the Context "
+ "Register. A SEQ LOAD or SEQ STORE with the VLF bit "
+ "set was executed with too large a length in the "
+ "variable length register (VSOL for SEQ STORE or VSIL "
+ "for SEQ LOAD)." },
+ { 0x16, "DMA Error" },
+ { 0x17, "Reserved." },
+ { 0x1A, "Job failed due to JR reset" },
+ { 0x1B, "Job failed due to Fail Mode" },
+ { 0x1C, "DECO Watchdog timer timeout error" },
+ { 0x1D, "DECO tried to copy a key from another DECO but the "
+ "other DECO's Key Registers were locked" },
+ { 0x1E, "DECO attempted to copy data from a DECO that had an "
+ "unmasked Descriptor error" },
+ { 0x1F, "LIODN error. DECO was trying to share from itself or "
+ "from another DECO but the two Non-SEQ LIODN values "
+ "didn't match or the 'shared from' DECO's Descriptor "
+ "required that the SEQ LIODNs be the same and they "
+ "aren't." },
+ { 0x20, "DECO has completed a reset initiated via the DRR "
+ "register" },
+ { 0x21, "Nonce error. When using EKT (CCM) key encryption "
+ "option in the FIFO STORE Command, the Nonce counter "
+ "reached its maximum value and this encryption mode "
+ "can no longer be used." },
+ { 0x22, "Meta data is too large (> 511 bytes) for TLS decap "
+ "(input frame; block ciphers) and IPsec decap (output "
+ "frame, when doing the next header byte update) and "
+ "DCRC (output frame)." },
+ { 0x80, "DNR (do not run) error" },
+ { 0x81, "undefined protocol command" },
+ { 0x82, "invalid setting in PDB" },
+ { 0x83, "Anti-replay LATE error" },
+ { 0x84, "Anti-replay REPLAY error" },
+ { 0x85, "Sequence number overflow" },
+ { 0x86, "Sigver invalid signature" },
+ { 0x87, "DSA Sign Illegal test descriptor" },
+ { 0x88, "Protocol Format Error - A protocol has seen an error "
+ "in the format of data received. When running RSA, "
+ "this means that formatting with random padding was "
+ "used, and did not follow the form: 0x00, 0x02, 8-to-N "
+ "bytes of non-zero pad, 0x00, F data." },
+ { 0x89, "Protocol Size Error - A protocol has seen an error in "
+ "size. When running RSA, pdb size N < (size of F) when "
+ "no formatting is used; or pdb size N < (F + 11) when "
+ "formatting is used." },
+ { 0xC1, "Blob Command error: Undefined mode" },
+ { 0xC2, "Blob Command error: Secure Memory Blob mode error" },
+ { 0xC4, "Blob Command error: Black Blob key or input size "
+ "error" },
+ { 0xC5, "Blob Command error: Invalid key destination" },
+ { 0xC8, "Blob Command error: Trusted/Secure mode error" },
+ { 0xF0, "IPsec TTL or hop limit field either came in as 0, "
+ "or was decremented to 0" },
+ { 0xF1, "3GPP HFN matches or exceeds the Threshold" },
+ };
+ u8 desc_error = status & JRSTA_DECOERR_ERROR_MASK;
+ int i;
+
+ report_jump_idx(status, outstr);
+
+ for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
+ if (desc_error_list[i].value == desc_error)
+ break;
+
+ if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) {
+ SPRINTFCAT(outstr, "%s", desc_error_list[i].error_text,
+ strlen(desc_error_list[i].error_text));
+ } else {
+ SPRINTFCAT(outstr, "unidentified error value 0x%02x",
+ desc_error, sizeof("ff"));
+ }
+}
+
+static void report_jr_status(u32 status, char *outstr)
+{
+ SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
+}
+
+static void report_cond_code_status(u32 status, char *outstr)
+{
+ SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
+}
+
+char *caam_jr_strstatus(char *outstr, u32 status)
+{
+ struct stat_src {
+ void (*report_ssed)(u32 status, char *outstr);
+ char *error;
+ } status_src[] = {
+ { NULL, "No error" },
+ { NULL, NULL },
+ { report_ccb_status, "CCB" },
+ { report_jump_status, "Jump" },
+ { report_deco_status, "DECO" },
+ { NULL, NULL },
+ { report_jr_status, "Job Ring" },
+ { report_cond_code_status, "Condition Code" },
+ };
+ u32 ssrc = status >> JRSTA_SSRC_SHIFT;
+
+ sprintf(outstr, "%s: ", status_src[ssrc].error);
+
+ if (status_src[ssrc].report_ssed)
+ status_src[ssrc].report_ssed(status, outstr);
+
+ return outstr;
+}
+EXPORT_SYMBOL(caam_jr_strstatus);
diff --git a/drivers/crypto/caam/error.h b/drivers/crypto/caam/error.h
new file mode 100644
index 0000000..02c7baa
--- /dev/null
+++ b/drivers/crypto/caam/error.h
@@ -0,0 +1,11 @@
+/*
+ * CAAM Error Reporting code header
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef CAAM_ERROR_H
+#define CAAM_ERROR_H
+#define CAAM_ERROR_STR_MAX 302
+extern char *caam_jr_strstatus(char *outstr, u32 status);
+#endif /* CAAM_ERROR_H */
diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h
new file mode 100644
index 0000000..a34be01
--- /dev/null
+++ b/drivers/crypto/caam/intern.h
@@ -0,0 +1,113 @@
+/*
+ * CAAM/SEC 4.x driver backend
+ * Private/internal definitions between modules
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef INTERN_H
+#define INTERN_H
+
+#define JOBR_UNASSIGNED 0
+#define JOBR_ASSIGNED 1
+
+/* Currently comes from Kconfig param as a ^2 (driver-required) */
+#define JOBR_DEPTH (1 << CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE)
+
+/* Kconfig params for interrupt coalescing if selected (else zero) */
+#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_INTC
+#define JOBR_INTC JRCFG_ICEN
+#define JOBR_INTC_TIME_THLD CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
+#define JOBR_INTC_COUNT_THLD CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD
+#else
+#define JOBR_INTC 0
+#define JOBR_INTC_TIME_THLD 0
+#define JOBR_INTC_COUNT_THLD 0
+#endif
+
+/*
+ * Storage for tracking each in-process entry moving across a ring
+ * Each entry on an output ring needs one of these
+ */
+struct caam_jrentry_info {
+ void (*callbk)(struct device *dev, u32 *desc, u32 status, void *arg);
+ void *cbkarg; /* Argument per ring entry */
+ u32 *desc_addr_virt; /* Stored virt addr for postprocessing */
+ dma_addr_t desc_addr_dma; /* Stored bus addr for done matching */
+ u32 desc_size; /* Stored size for postprocessing, header derived */
+};
+
+/* Private sub-storage for a single JobR */
+struct caam_drv_private_jr {
+ struct device *parentdev; /* points back to controller dev */
+ int ridx;
+ struct caam_job_ring __iomem *rregs; /* JobR's register space */
+ struct tasklet_struct irqtask[NR_CPUS];
+ int irq; /* One per queue */
+ int assign; /* busy/free */
+
+ /* Job ring info */
+ int ringsize; /* Size of rings (assume input = output) */
+ struct caam_jrentry_info *entinfo; /* Alloc'ed 1 per ring entry */
+ spinlock_t inplock ____cacheline_aligned; /* Input ring index lock */
+ int inp_ring_write_index; /* Input index "tail" */
+ int head; /* entinfo (s/w ring) head index */
+ dma_addr_t *inpring; /* Base of input ring, alloc DMA-safe */
+ spinlock_t outlock ____cacheline_aligned; /* Output ring index lock */
+ int out_ring_read_index; /* Output index "tail" */
+ int tail; /* entinfo (s/w ring) tail index */
+ struct jr_outentry *outring; /* Base of output ring, DMA-safe */
+};
+
+/*
+ * Driver-private storage for a single CAAM block instance
+ */
+struct caam_drv_private {
+
+ struct device *dev;
+ struct device **jrdev; /* Alloc'ed array per sub-device */
+ spinlock_t jr_alloc_lock;
+ struct platform_device *pdev;
+
+ /* Physical-presence section */
+ struct caam_ctrl *ctrl; /* controller region */
+ struct caam_deco **deco; /* DECO/CCB views */
+ struct caam_assurance *ac;
+ struct caam_queue_if *qi; /* QI control region */
+
+ /*
+ * Detected geometry block. Filled in from device tree if powerpc,
+ * or from register-based version detection code
+ */
+ u8 total_jobrs; /* Total Job Rings in device */
+ u8 qi_present; /* Nonzero if QI present in device */
+ int secvio_irq; /* Security violation interrupt number */
+
+ /* which jr allocated to scatterlist crypto */
+ atomic_t tfm_count ____cacheline_aligned;
+ int num_jrs_for_algapi;
+ struct device **algapi_jr;
+ /* list of registered crypto algorithms (mk generic context handle?) */
+ struct list_head alg_list;
+
+ /*
+ * debugfs entries for developer view into driver/device
+ * variables at runtime.
+ */
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dfs_root;
+ struct dentry *ctl; /* controller dir */
+ struct dentry *ctl_rq_dequeued, *ctl_ob_enc_req, *ctl_ib_dec_req;
+ struct dentry *ctl_ob_enc_bytes, *ctl_ob_prot_bytes;
+ struct dentry *ctl_ib_dec_bytes, *ctl_ib_valid_bytes;
+ struct dentry *ctl_faultaddr, *ctl_faultdetail, *ctl_faultstatus;
+
+ struct debugfs_blob_wrapper ctl_kek_wrap, ctl_tkek_wrap, ctl_tdsk_wrap;
+ struct dentry *ctl_kek, *ctl_tkek, *ctl_tdsk;
+#endif
+};
+
+void caam_jr_algapi_init(struct device *dev);
+void caam_jr_algapi_remove(struct device *dev);
+#endif /* INTERN_H */
diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
new file mode 100644
index 0000000..340fa32
--- /dev/null
+++ b/drivers/crypto/caam/jr.c
@@ -0,0 +1,517 @@
+/*
+ * CAAM/SEC 4.x transport/backend driver
+ * JobR backend functionality
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#include "compat.h"
+#include "regs.h"
+#include "jr.h"
+#include "desc.h"
+#include "intern.h"
+
+/* Main per-ring interrupt handler */
+static irqreturn_t caam_jr_interrupt(int irq, void *st_dev)
+{
+ struct device *dev = st_dev;
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ u32 irqstate;
+
+ /*
+ * Check the output ring for ready responses, kick
+ * tasklet if jobs done.
+ */
+ irqstate = rd_reg32(&jrp->rregs->jrintstatus);
+ if (!irqstate)
+ return IRQ_NONE;
+
+ /*
+ * If JobR error, we got more development work to do
+ * Flag a bug now, but we really need to shut down and
+ * restart the queue (and fix code).
+ */
+ if (irqstate & JRINT_JR_ERROR) {
+ dev_err(dev, "job ring error: irqstate: %08x\n", irqstate);
+ BUG();
+ }
+
+ /* mask valid interrupts */
+ setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ /* Have valid interrupt at this point, just ACK and trigger */
+ wr_reg32(&jrp->rregs->jrintstatus, irqstate);
+
+ preempt_disable();
+ tasklet_schedule(&jrp->irqtask[smp_processor_id()]);
+ preempt_enable();
+
+ return IRQ_HANDLED;
+}
+
+/* Deferred service handler, run as interrupt-fired tasklet */
+static void caam_jr_dequeue(unsigned long devarg)
+{
+ int hw_idx, sw_idx, i, head, tail;
+ struct device *dev = (struct device *)devarg;
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ void (*usercall)(struct device *dev, u32 *desc, u32 status, void *arg);
+ u32 *userdesc, userstatus;
+ void *userarg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&jrp->outlock, flags);
+
+ head = ACCESS_ONCE(jrp->head);
+ sw_idx = tail = jrp->tail;
+
+ while (CIRC_CNT(head, tail, JOBR_DEPTH) >= 1 &&
+ rd_reg32(&jrp->rregs->outring_used)) {
+
+ hw_idx = jrp->out_ring_read_index;
+ for (i = 0; CIRC_CNT(head, tail + i, JOBR_DEPTH) >= 1; i++) {
+ sw_idx = (tail + i) & (JOBR_DEPTH - 1);
+
+ smp_read_barrier_depends();
+
+ if (jrp->outring[hw_idx].desc ==
+ jrp->entinfo[sw_idx].desc_addr_dma)
+ break; /* found */
+ }
+ /* we should never fail to find a matching descriptor */
+ BUG_ON(CIRC_CNT(head, tail + i, JOBR_DEPTH) <= 0);
+
+ /* Unmap just-run descriptor so we can post-process */
+ dma_unmap_single(dev, jrp->outring[hw_idx].desc,
+ jrp->entinfo[sw_idx].desc_size,
+ DMA_TO_DEVICE);
+
+ /* mark completed, avoid matching on a recycled desc addr */
+ jrp->entinfo[sw_idx].desc_addr_dma = 0;
+
+ /* Stash callback params for use outside of lock */
+ usercall = jrp->entinfo[sw_idx].callbk;
+ userarg = jrp->entinfo[sw_idx].cbkarg;
+ userdesc = jrp->entinfo[sw_idx].desc_addr_virt;
+ userstatus = jrp->outring[hw_idx].jrstatus;
+
+ smp_mb();
+
+ jrp->out_ring_read_index = (jrp->out_ring_read_index + 1) &
+ (JOBR_DEPTH - 1);
+
+ /*
+ * if this job completed out-of-order, do not increment
+ * the tail. Otherwise, increment tail by 1 plus the
+ * number of subsequent jobs already completed out-of-order
+ */
+ if (sw_idx == tail) {
+ do {
+ tail = (tail + 1) & (JOBR_DEPTH - 1);
+ smp_read_barrier_depends();
+ } while (CIRC_CNT(head, tail, JOBR_DEPTH) >= 1 &&
+ jrp->entinfo[tail].desc_addr_dma == 0);
+
+ jrp->tail = tail;
+ }
+
+ /* set done */
+ wr_reg32(&jrp->rregs->outring_rmvd, 1);
+
+ spin_unlock_irqrestore(&jrp->outlock, flags);
+
+ /* Finally, execute user's callback */
+ usercall(dev, userdesc, userstatus, userarg);
+
+ spin_lock_irqsave(&jrp->outlock, flags);
+
+ head = ACCESS_ONCE(jrp->head);
+ sw_idx = tail = jrp->tail;
+ }
+
+ spin_unlock_irqrestore(&jrp->outlock, flags);
+
+ /* reenable / unmask IRQs */
+ clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+}
+
+/**
+ * caam_jr_register() - Alloc a ring for someone to use as needed. Returns
+ * an ordinal of the rings allocated, else returns -ENODEV if no rings
+ * are available.
+ * @ctrldev: points to the controller level dev (parent) that
+ * owns rings available for use.
+ * @dev: points to where a pointer to the newly allocated queue's
+ * dev can be written to if successful.
+ **/
+int caam_jr_register(struct device *ctrldev, struct device **rdev)
+{
+ struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
+ struct caam_drv_private_jr *jrpriv = NULL;
+ unsigned long flags;
+ int ring;
+
+ /* Lock, if free ring - assign, unlock */
+ spin_lock_irqsave(&ctrlpriv->jr_alloc_lock, flags);
+ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
+ jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]);
+ if (jrpriv->assign == JOBR_UNASSIGNED) {
+ jrpriv->assign = JOBR_ASSIGNED;
+ *rdev = ctrlpriv->jrdev[ring];
+ spin_unlock_irqrestore(&ctrlpriv->jr_alloc_lock, flags);
+ return ring;
+ }
+ }
+
+ /* If assigned, write dev where caller needs it */
+ spin_unlock_irqrestore(&ctrlpriv->jr_alloc_lock, flags);
+ *rdev = NULL;
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL(caam_jr_register);
+
+/**
+ * caam_jr_deregister() - Deregister an API and release the queue.
+ * Returns 0 if OK, -EBUSY if queue still contains pending entries
+ * or unprocessed results at the time of the call
+ * @dev - points to the dev that identifies the queue to
+ * be released.
+ **/
+int caam_jr_deregister(struct device *rdev)
+{
+ struct caam_drv_private_jr *jrpriv = dev_get_drvdata(rdev);
+ struct caam_drv_private *ctrlpriv;
+ unsigned long flags;
+
+ /* Get the owning controller's private space */
+ ctrlpriv = dev_get_drvdata(jrpriv->parentdev);
+
+ /*
+ * Make sure ring empty before release
+ */
+ if (rd_reg32(&jrpriv->rregs->outring_used) ||
+ (rd_reg32(&jrpriv->rregs->inpring_avail) != JOBR_DEPTH))
+ return -EBUSY;
+
+ /* Release ring */
+ spin_lock_irqsave(&ctrlpriv->jr_alloc_lock, flags);
+ jrpriv->assign = JOBR_UNASSIGNED;
+ spin_unlock_irqrestore(&ctrlpriv->jr_alloc_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(caam_jr_deregister);
+
+/**
+ * caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK,
+ * -EBUSY if the queue is full, -EIO if it cannot map the caller's
+ * descriptor.
+ * @dev: device of the job ring to be used. This device should have
+ * been assigned prior by caam_jr_register().
+ * @desc: points to a job descriptor that execute our request. All
+ * descriptors (and all referenced data) must be in a DMAable
+ * region, and all data references must be physical addresses
+ * accessible to CAAM (i.e. within a PAMU window granted
+ * to it).
+ * @cbk: pointer to a callback function to be invoked upon completion
+ * of this request. This has the form:
+ * callback(struct device *dev, u32 *desc, u32 stat, void *arg)
+ * where:
+ * @dev: contains the job ring device that processed this
+ * response.
+ * @desc: descriptor that initiated the request, same as
+ * "desc" being argued to caam_jr_enqueue().
+ * @status: untranslated status received from CAAM. See the
+ * reference manual for a detailed description of
+ * error meaning, or see the JRSTA definitions in the
+ * register header file
+ * @areq: optional pointer to an argument passed with the
+ * original request
+ * @areq: optional pointer to a user argument for use at callback
+ * time.
+ **/
+int caam_jr_enqueue(struct device *dev, u32 *desc,
+ void (*cbk)(struct device *dev, u32 *desc,
+ u32 status, void *areq),
+ void *areq)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ struct caam_jrentry_info *head_entry;
+ unsigned long flags;
+ int head, tail, desc_size;
+ dma_addr_t desc_dma;
+
+ desc_size = (*desc & HDR_JD_LENGTH_MASK) * sizeof(u32);
+ desc_dma = dma_map_single(dev, desc, desc_size, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, desc_dma)) {
+ dev_err(dev, "caam_jr_enqueue(): can't map jobdesc\n");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&jrp->inplock, flags);
+
+ head = jrp->head;
+ tail = ACCESS_ONCE(jrp->tail);
+
+ if (!rd_reg32(&jrp->rregs->inpring_avail) ||
+ CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) {
+ spin_unlock_irqrestore(&jrp->inplock, flags);
+ dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE);
+ return -EBUSY;
+ }
+
+ head_entry = &jrp->entinfo[head];
+ head_entry->desc_addr_virt = desc;
+ head_entry->desc_size = desc_size;
+ head_entry->callbk = (void *)cbk;
+ head_entry->cbkarg = areq;
+ head_entry->desc_addr_dma = desc_dma;
+
+ jrp->inpring[jrp->inp_ring_write_index] = desc_dma;
+
+ smp_wmb();
+
+ jrp->inp_ring_write_index = (jrp->inp_ring_write_index + 1) &
+ (JOBR_DEPTH - 1);
+ jrp->head = (head + 1) & (JOBR_DEPTH - 1);
+
+ wmb();
+
+ wr_reg32(&jrp->rregs->inpring_jobadd, 1);
+
+ spin_unlock_irqrestore(&jrp->inplock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(caam_jr_enqueue);
+
+static int caam_reset_hw_jr(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ unsigned int timeout = 100000;
+
+ /*
+ * mask interrupts since we are going to poll
+ * for reset completion status
+ */
+ setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ /* initiate flush (required prior to reset) */
+ wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+ while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
+ JRINT_ERR_HALT_INPROGRESS) && --timeout)
+ cpu_relax();
+
+ if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
+ JRINT_ERR_HALT_COMPLETE || timeout == 0) {
+ dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
+ return -EIO;
+ }
+
+ /* initiate reset */
+ timeout = 100000;
+ wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+ while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
+ cpu_relax();
+
+ if (timeout == 0) {
+ dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
+ return -EIO;
+ }
+
+ /* unmask interrupts */
+ clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ return 0;
+}
+
+/*
+ * Init JobR independent of platform property detection
+ */
+static int caam_jr_init(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp;
+ dma_addr_t inpbusaddr, outbusaddr;
+ int i, error;
+
+ jrp = dev_get_drvdata(dev);
+
+ /* Connect job ring interrupt handler. */
+ for_each_possible_cpu(i)
+ tasklet_init(&jrp->irqtask[i], caam_jr_dequeue,
+ (unsigned long)dev);
+
+ error = request_irq(jrp->irq, caam_jr_interrupt, IRQF_SHARED,
+ "caam-jobr", dev);
+ if (error) {
+ dev_err(dev, "can't connect JobR %d interrupt (%d)\n",
+ jrp->ridx, jrp->irq);
+ irq_dispose_mapping(jrp->irq);
+ jrp->irq = 0;
+ return -EINVAL;
+ }
+
+ error = caam_reset_hw_jr(dev);
+ if (error)
+ return error;
+
+ jrp->inpring = kzalloc(sizeof(dma_addr_t) * JOBR_DEPTH,
+ GFP_KERNEL | GFP_DMA);
+ jrp->outring = kzalloc(sizeof(struct jr_outentry) *
+ JOBR_DEPTH, GFP_KERNEL | GFP_DMA);
+
+ jrp->entinfo = kzalloc(sizeof(struct caam_jrentry_info) * JOBR_DEPTH,
+ GFP_KERNEL);
+
+ if ((jrp->inpring == NULL) || (jrp->outring == NULL) ||
+ (jrp->entinfo == NULL)) {
+ dev_err(dev, "can't allocate job rings for %d\n",
+ jrp->ridx);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < JOBR_DEPTH; i++)
+ jrp->entinfo[i].desc_addr_dma = !0;
+
+ /* Setup rings */
+ inpbusaddr = dma_map_single(dev, jrp->inpring,
+ sizeof(u32 *) * JOBR_DEPTH,
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(dev, inpbusaddr)) {
+ dev_err(dev, "caam_jr_init(): can't map input ring\n");
+ kfree(jrp->inpring);
+ kfree(jrp->outring);
+ kfree(jrp->entinfo);
+ return -EIO;
+ }
+
+ outbusaddr = dma_map_single(dev, jrp->outring,
+ sizeof(struct jr_outentry) * JOBR_DEPTH,
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(dev, outbusaddr)) {
+ dev_err(dev, "caam_jr_init(): can't map output ring\n");
+ dma_unmap_single(dev, inpbusaddr,
+ sizeof(u32 *) * JOBR_DEPTH,
+ DMA_BIDIRECTIONAL);
+ kfree(jrp->inpring);
+ kfree(jrp->outring);
+ kfree(jrp->entinfo);
+ return -EIO;
+ }
+
+ jrp->inp_ring_write_index = 0;
+ jrp->out_ring_read_index = 0;
+ jrp->head = 0;
+ jrp->tail = 0;
+
+ wr_reg64(&jrp->rregs->inpring_base, inpbusaddr);
+ wr_reg64(&jrp->rregs->outring_base, outbusaddr);
+ wr_reg32(&jrp->rregs->inpring_size, JOBR_DEPTH);
+ wr_reg32(&jrp->rregs->outring_size, JOBR_DEPTH);
+
+ jrp->ringsize = JOBR_DEPTH;
+
+ spin_lock_init(&jrp->inplock);
+ spin_lock_init(&jrp->outlock);
+
+ /* Select interrupt coalescing parameters */
+ setbits32(&jrp->rregs->rconfig_lo, JOBR_INTC |
+ (JOBR_INTC_COUNT_THLD << JRCFG_ICDCT_SHIFT) |
+ (JOBR_INTC_TIME_THLD << JRCFG_ICTT_SHIFT));
+
+ jrp->assign = JOBR_UNASSIGNED;
+ return 0;
+}
+
+/*
+ * Shutdown JobR independent of platform property code
+ */
+int caam_jr_shutdown(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ dma_addr_t inpbusaddr, outbusaddr;
+ int ret, i;
+
+ ret = caam_reset_hw_jr(dev);
+
+ for_each_possible_cpu(i)
+ tasklet_kill(&jrp->irqtask[i]);
+
+ /* Release interrupt */
+ free_irq(jrp->irq, dev);
+
+ /* Free rings */
+ inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
+ outbusaddr = rd_reg64(&jrp->rregs->outring_base);
+ dma_unmap_single(dev, outbusaddr,
+ sizeof(struct jr_outentry) * JOBR_DEPTH,
+ DMA_BIDIRECTIONAL);
+ dma_unmap_single(dev, inpbusaddr, sizeof(u32 *) * JOBR_DEPTH,
+ DMA_BIDIRECTIONAL);
+ kfree(jrp->outring);
+ kfree(jrp->inpring);
+ kfree(jrp->entinfo);
+
+ return ret;
+}
+
+/*
+ * Probe routine for each detected JobR subsystem. It assumes that
+ * property detection was picked up externally.
+ */
+int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
+ int ring)
+{
+ struct device *ctrldev, *jrdev;
+ struct platform_device *jr_pdev;
+ struct caam_drv_private *ctrlpriv;
+ struct caam_drv_private_jr *jrpriv;
+ u32 *jroffset;
+ int error;
+
+ ctrldev = &pdev->dev;
+ ctrlpriv = dev_get_drvdata(ctrldev);
+
+ jrpriv = kmalloc(sizeof(struct caam_drv_private_jr),
+ GFP_KERNEL);
+ if (jrpriv == NULL) {
+ dev_err(ctrldev, "can't alloc private mem for job ring %d\n",
+ ring);
+ return -ENOMEM;
+ }
+ jrpriv->parentdev = ctrldev; /* point back to parent */
+ jrpriv->ridx = ring; /* save ring identity relative to detection */
+
+ /*
+ * Derive a pointer to the detected JobRs regs
+ * Driver has already iomapped the entire space, we just
+ * need to add in the offset to this JobR. Don't know if I
+ * like this long-term, but it'll run
+ */
+ jroffset = (u32 *)of_get_property(np, "reg", NULL);
+ jrpriv->rregs = (struct caam_job_ring __iomem *)((void *)ctrlpriv->ctrl
+ + *jroffset);
+
+ /* Build a local dev for each detected queue */
+ jr_pdev = of_platform_device_create(np, NULL, ctrldev);
+ if (jr_pdev == NULL) {
+ kfree(jrpriv);
+ return -EINVAL;
+ }
+ jrdev = &jr_pdev->dev;
+ dev_set_drvdata(jrdev, jrpriv);
+ ctrlpriv->jrdev[ring] = jrdev;
+
+ /* Identify the interrupt */
+ jrpriv->irq = of_irq_to_resource(np, 0, NULL);
+
+ /* Now do the platform independent part */
+ error = caam_jr_init(jrdev); /* now turn on hardware */
+ if (error) {
+ kfree(jrpriv);
+ return error;
+ }
+
+ return error;
+}
diff --git a/drivers/crypto/caam/jr.h b/drivers/crypto/caam/jr.h
new file mode 100644
index 0000000..c23df39
--- /dev/null
+++ b/drivers/crypto/caam/jr.h
@@ -0,0 +1,21 @@
+/*
+ * CAAM public-level include definitions for the JobR backend
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef JR_H
+#define JR_H
+
+/* Prototypes for backend-level services exposed to APIs */
+int caam_jr_register(struct device *ctrldev, struct device **rdev);
+int caam_jr_deregister(struct device *rdev);
+int caam_jr_enqueue(struct device *dev, u32 *desc,
+ void (*cbk)(struct device *dev, u32 *desc, u32 status,
+ void *areq),
+ void *areq);
+
+extern int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
+ int ring);
+extern int caam_jr_shutdown(struct device *dev);
+#endif /* JR_H */
diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h
new file mode 100644
index 0000000..aee394e
--- /dev/null
+++ b/drivers/crypto/caam/regs.h
@@ -0,0 +1,663 @@
+/*
+ * CAAM hardware register-level view
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ */
+
+#ifndef REGS_H
+#define REGS_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+/*
+ * Architecture-specific register access methods
+ *
+ * CAAM's bus-addressable registers are 64 bits internally.
+ * They have been wired to be safely accessible on 32-bit
+ * architectures, however. Registers were organized such
+ * that (a) they can be contained in 32 bits, (b) if not, then they
+ * can be treated as two 32-bit entities, or finally (c) if they
+ * must be treated as a single 64-bit value, then this can safely
+ * be done with two 32-bit cycles.
+ *
+ * For 32-bit operations on 64-bit values, CAAM follows the same
+ * 64-bit register access conventions as it's predecessors, in that
+ * writes are "triggered" by a write to the register at the numerically
+ * higher address, thus, a full 64-bit write cycle requires a write
+ * to the lower address, followed by a write to the higher address,
+ * which will latch/execute the write cycle.
+ *
+ * For example, let's assume a SW reset of CAAM through the master
+ * configuration register.
+ * - SWRST is in bit 31 of MCFG.
+ * - MCFG begins at base+0x0000.
+ * - Bits 63-32 are a 32-bit word at base+0x0000 (numerically-lower)
+ * - Bits 31-0 are a 32-bit word at base+0x0004 (numerically-higher)
+ *
+ * (and on Power, the convention is 0-31, 32-63, I know...)
+ *
+ * Assuming a 64-bit write to this MCFG to perform a software reset
+ * would then require a write of 0 to base+0x0000, followed by a
+ * write of 0x80000000 to base+0x0004, which would "execute" the
+ * reset.
+ *
+ * Of course, since MCFG 63-32 is all zero, we could cheat and simply
+ * write 0x8000000 to base+0x0004, and the reset would work fine.
+ * However, since CAAM does contain some write-and-read-intended
+ * 64-bit registers, this code defines 64-bit access methods for
+ * the sake of internal consistency and simplicity, and so that a
+ * clean transition to 64-bit is possible when it becomes necessary.
+ *
+ * There are limitations to this that the developer must recognize.
+ * 32-bit architectures cannot enforce an atomic-64 operation,
+ * Therefore:
+ *
+ * - On writes, since the HW is assumed to latch the cycle on the
+ * write of the higher-numeric-address word, then ordered
+ * writes work OK.
+ *
+ * - For reads, where a register contains a relevant value of more
+ * that 32 bits, the hardware employs logic to latch the other
+ * "half" of the data until read, ensuring an accurate value.
+ * This is of particular relevance when dealing with CAAM's
+ * performance counters.
+ *
+ */
+
+#ifdef __BIG_ENDIAN
+#define wr_reg32(reg, data) out_be32(reg, data)
+#define rd_reg32(reg) in_be32(reg)
+#ifdef CONFIG_64BIT
+#define wr_reg64(reg, data) out_be64(reg, data)
+#define rd_reg64(reg) in_be64(reg)
+#endif
+#else
+#ifdef __LITTLE_ENDIAN
+#define wr_reg32(reg, data) __raw_writel(reg, data)
+#define rd_reg32(reg) __raw_readl(reg)
+#ifdef CONFIG_64BIT
+#define wr_reg64(reg, data) __raw_writeq(reg, data)
+#define rd_reg64(reg) __raw_readq(reg)
+#endif
+#endif
+#endif
+
+#ifndef CONFIG_64BIT
+static inline void wr_reg64(u64 __iomem *reg, u64 data)
+{
+ wr_reg32((u32 __iomem *)reg, (data & 0xffffffff00000000ull) >> 32);
+ wr_reg32((u32 __iomem *)reg + 1, data & 0x00000000ffffffffull);
+}
+
+static inline u64 rd_reg64(u64 __iomem *reg)
+{
+ return (((u64)rd_reg32((u32 __iomem *)reg)) << 32) |
+ ((u64)rd_reg32((u32 __iomem *)reg + 1));
+}
+#endif
+
+/*
+ * jr_outentry
+ * Represents each entry in a JobR output ring
+ */
+struct jr_outentry {
+ dma_addr_t desc;/* Pointer to completed descriptor */
+ u32 jrstatus; /* Status for completed descriptor */
+} __packed;
+
+/*
+ * caam_perfmon - Performance Monitor/Secure Memory Status/
+ * CAAM Global Status/Component Version IDs
+ *
+ * Spans f00-fff wherever instantiated
+ */
+
+/* Number of DECOs */
+#define CHA_NUM_DECONUM_SHIFT 56
+#define CHA_NUM_DECONUM_MASK (0xfull << CHA_NUM_DECONUM_SHIFT)
+
+struct caam_perfmon {
+ /* Performance Monitor Registers f00-f9f */
+ u64 req_dequeued; /* PC_REQ_DEQ - Dequeued Requests */
+ u64 ob_enc_req; /* PC_OB_ENC_REQ - Outbound Encrypt Requests */
+ u64 ib_dec_req; /* PC_IB_DEC_REQ - Inbound Decrypt Requests */
+ u64 ob_enc_bytes; /* PC_OB_ENCRYPT - Outbound Bytes Encrypted */
+ u64 ob_prot_bytes; /* PC_OB_PROTECT - Outbound Bytes Protected */
+ u64 ib_dec_bytes; /* PC_IB_DECRYPT - Inbound Bytes Decrypted */
+ u64 ib_valid_bytes; /* PC_IB_VALIDATED Inbound Bytes Validated */
+ u64 rsvd[13];
+
+ /* CAAM Hardware Instantiation Parameters fa0-fbf */
+ u64 cha_rev; /* CRNR - CHA Revision Number */
+#define CTPR_QI_SHIFT 57
+#define CTPR_QI_MASK (0x1ull << CTPR_QI_SHIFT)
+ u64 comp_parms; /* CTPR - Compile Parameters Register */
+ u64 rsvd1[2];
+
+ /* CAAM Global Status fc0-fdf */
+ u64 faultaddr; /* FAR - Fault Address */
+ u32 faultliodn; /* FALR - Fault Address LIODN */
+ u32 faultdetail; /* FADR - Fault Addr Detail */
+ u32 rsvd2;
+ u32 status; /* CSTA - CAAM Status */
+ u64 rsvd3;
+
+ /* Component Instantiation Parameters fe0-fff */
+ u32 rtic_id; /* RVID - RTIC Version ID */
+ u32 ccb_id; /* CCBVID - CCB Version ID */
+ u64 cha_id; /* CHAVID - CHA Version ID */
+ u64 cha_num; /* CHANUM - CHA Number */
+ u64 caam_id; /* CAAMVID - CAAM Version ID */
+};
+
+/* LIODN programming for DMA configuration */
+#define MSTRID_LOCK_LIODN 0x80000000
+#define MSTRID_LOCK_MAKETRUSTED 0x00010000 /* only for JR masterid */
+
+#define MSTRID_LIODN_MASK 0x0fff
+struct masterid {
+ u32 liodn_ms; /* lock and make-trusted control bits */
+ u32 liodn_ls; /* LIODN for non-sequence and seq access */
+};
+
+/* Partition ID for DMA configuration */
+struct partid {
+ u32 rsvd1;
+ u32 pidr; /* partition ID, DECO */
+};
+
+/* RNG test mode (replicated twice in some configurations) */
+/* Padded out to 0x100 */
+struct rngtst {
+ u32 mode; /* RTSTMODEx - Test mode */
+ u32 rsvd1[3];
+ u32 reset; /* RTSTRESETx - Test reset control */
+ u32 rsvd2[3];
+ u32 status; /* RTSTSSTATUSx - Test status */
+ u32 rsvd3;
+ u32 errstat; /* RTSTERRSTATx - Test error status */
+ u32 rsvd4;
+ u32 errctl; /* RTSTERRCTLx - Test error control */
+ u32 rsvd5;
+ u32 entropy; /* RTSTENTROPYx - Test entropy */
+ u32 rsvd6[15];
+ u32 verifctl; /* RTSTVERIFCTLx - Test verification control */
+ u32 rsvd7;
+ u32 verifstat; /* RTSTVERIFSTATx - Test verification status */
+ u32 rsvd8;
+ u32 verifdata; /* RTSTVERIFDx - Test verification data */
+ u32 rsvd9;
+ u32 xkey; /* RTSTXKEYx - Test XKEY */
+ u32 rsvd10;
+ u32 oscctctl; /* RTSTOSCCTCTLx - Test osc. counter control */
+ u32 rsvd11;
+ u32 oscct; /* RTSTOSCCTx - Test oscillator counter */
+ u32 rsvd12;
+ u32 oscctstat; /* RTSTODCCTSTATx - Test osc counter status */
+ u32 rsvd13[2];
+ u32 ofifo[4]; /* RTSTOFIFOx - Test output FIFO */
+ u32 rsvd14[15];
+};
+
+/*
+ * caam_ctrl - basic core configuration
+ * starts base + 0x0000 padded out to 0x1000
+ */
+
+#define KEK_KEY_SIZE 8
+#define TKEK_KEY_SIZE 8
+#define TDSK_KEY_SIZE 8
+
+#define DECO_RESET 1 /* Use with DECO reset/availability regs */
+#define DECO_RESET_0 (DECO_RESET << 0)
+#define DECO_RESET_1 (DECO_RESET << 1)
+#define DECO_RESET_2 (DECO_RESET << 2)
+#define DECO_RESET_3 (DECO_RESET << 3)
+#define DECO_RESET_4 (DECO_RESET << 4)
+
+struct caam_ctrl {
+ /* Basic Configuration Section 000-01f */
+ /* Read/Writable */
+ u32 rsvd1;
+ u32 mcr; /* MCFG Master Config Register */
+ u32 rsvd2[2];
+
+ /* Bus Access Configuration Section 010-11f */
+ /* Read/Writable */
+ struct masterid jr_mid[4]; /* JRxLIODNR - JobR LIODN setup */
+ u32 rsvd3[12];
+ struct masterid rtic_mid[4]; /* RTICxLIODNR - RTIC LIODN setup */
+ u32 rsvd4[7];
+ u32 deco_rq; /* DECORR - DECO Request */
+ struct partid deco_mid[5]; /* DECOxLIODNR - 1 per DECO */
+ u32 rsvd5[22];
+
+ /* DECO Availability/Reset Section 120-3ff */
+ u32 deco_avail; /* DAR - DECO availability */
+ u32 deco_reset; /* DRR - DECO reset */
+ u32 rsvd6[182];
+
+ /* Key Encryption/Decryption Configuration 400-5ff */
+ /* Read/Writable only while in Non-secure mode */
+ u32 kek[KEK_KEY_SIZE]; /* JDKEKR - Key Encryption Key */
+ u32 tkek[TKEK_KEY_SIZE]; /* TDKEKR - Trusted Desc KEK */
+ u32 tdsk[TDSK_KEY_SIZE]; /* TDSKR - Trusted Desc Signing Key */
+ u32 rsvd7[32];
+ u64 sknonce; /* SKNR - Secure Key Nonce */
+ u32 rsvd8[70];
+
+ /* RNG Test/Verification/Debug Access 600-7ff */
+ /* (Useful in Test/Debug modes only...) */
+ struct rngtst rtst[2];
+
+ u32 rsvd9[448];
+
+ /* Performance Monitor f00-fff */
+ struct caam_perfmon perfmon;
+};
+
+/*
+ * Controller master config register defs
+ */
+#define MCFGR_SWRESET 0x80000000 /* software reset */
+#define MCFGR_WDENABLE 0x40000000 /* DECO watchdog enable */
+#define MCFGR_WDFAIL 0x20000000 /* DECO watchdog force-fail */
+#define MCFGR_DMA_RESET 0x10000000
+#define MCFGR_LONG_PTR 0x00010000 /* Use >32-bit desc addressing */
+
+/* AXI read cache control */
+#define MCFGR_ARCACHE_SHIFT 12
+#define MCFGR_ARCACHE_MASK (0xf << MCFGR_ARCACHE_SHIFT)
+
+/* AXI write cache control */
+#define MCFGR_AWCACHE_SHIFT 8
+#define MCFGR_AWCACHE_MASK (0xf << MCFGR_AWCACHE_SHIFT)
+
+/* AXI pipeline depth */
+#define MCFGR_AXIPIPE_SHIFT 4
+#define MCFGR_AXIPIPE_MASK (0xf << MCFGR_AXIPIPE_SHIFT)
+
+#define MCFGR_AXIPRI 0x00000008 /* Assert AXI priority sideband */
+#define MCFGR_BURST_64 0x00000001 /* Max burst size */
+
+/*
+ * caam_job_ring - direct job ring setup
+ * 1-4 possible per instantiation, base + 1000/2000/3000/4000
+ * Padded out to 0x1000
+ */
+struct caam_job_ring {
+ /* Input ring */
+ u64 inpring_base; /* IRBAx - Input desc ring baseaddr */
+ u32 rsvd1;
+ u32 inpring_size; /* IRSx - Input ring size */
+ u32 rsvd2;
+ u32 inpring_avail; /* IRSAx - Input ring room remaining */
+ u32 rsvd3;
+ u32 inpring_jobadd; /* IRJAx - Input ring jobs added */
+
+ /* Output Ring */
+ u64 outring_base; /* ORBAx - Output status ring base addr */
+ u32 rsvd4;
+ u32 outring_size; /* ORSx - Output ring size */
+ u32 rsvd5;
+ u32 outring_rmvd; /* ORJRx - Output ring jobs removed */
+ u32 rsvd6;
+ u32 outring_used; /* ORSFx - Output ring slots full */
+
+ /* Status/Configuration */
+ u32 rsvd7;
+ u32 jroutstatus; /* JRSTAx - JobR output status */
+ u32 rsvd8;
+ u32 jrintstatus; /* JRINTx - JobR interrupt status */
+ u32 rconfig_hi; /* JRxCFG - Ring configuration */
+ u32 rconfig_lo;
+
+ /* Indices. CAAM maintains as "heads" of each queue */
+ u32 rsvd9;
+ u32 inp_rdidx; /* IRRIx - Input ring read index */
+ u32 rsvd10;
+ u32 out_wtidx; /* ORWIx - Output ring write index */
+
+ /* Command/control */
+ u32 rsvd11;
+ u32 jrcommand; /* JRCRx - JobR command */
+
+ u32 rsvd12[932];
+
+ /* Performance Monitor f00-fff */
+ struct caam_perfmon perfmon;
+};
+
+#define JR_RINGSIZE_MASK 0x03ff
+/*
+ * jrstatus - Job Ring Output Status
+ * All values in lo word
+ * Also note, same values written out as status through QI
+ * in the command/status field of a frame descriptor
+ */
+#define JRSTA_SSRC_SHIFT 28
+#define JRSTA_SSRC_MASK 0xf0000000
+
+#define JRSTA_SSRC_NONE 0x00000000
+#define JRSTA_SSRC_CCB_ERROR 0x20000000
+#define JRSTA_SSRC_JUMP_HALT_USER 0x30000000
+#define JRSTA_SSRC_DECO 0x40000000
+#define JRSTA_SSRC_JRERROR 0x60000000
+#define JRSTA_SSRC_JUMP_HALT_CC 0x70000000
+
+#define JRSTA_DECOERR_JUMP 0x08000000
+#define JRSTA_DECOERR_INDEX_SHIFT 8
+#define JRSTA_DECOERR_INDEX_MASK 0xff00
+#define JRSTA_DECOERR_ERROR_MASK 0x00ff
+
+#define JRSTA_DECOERR_NONE 0x00
+#define JRSTA_DECOERR_LINKLEN 0x01
+#define JRSTA_DECOERR_LINKPTR 0x02
+#define JRSTA_DECOERR_JRCTRL 0x03
+#define JRSTA_DECOERR_DESCCMD 0x04
+#define JRSTA_DECOERR_ORDER 0x05
+#define JRSTA_DECOERR_KEYCMD 0x06
+#define JRSTA_DECOERR_LOADCMD 0x07
+#define JRSTA_DECOERR_STORECMD 0x08
+#define JRSTA_DECOERR_OPCMD 0x09
+#define JRSTA_DECOERR_FIFOLDCMD 0x0a
+#define JRSTA_DECOERR_FIFOSTCMD 0x0b
+#define JRSTA_DECOERR_MOVECMD 0x0c
+#define JRSTA_DECOERR_JUMPCMD 0x0d
+#define JRSTA_DECOERR_MATHCMD 0x0e
+#define JRSTA_DECOERR_SHASHCMD 0x0f
+#define JRSTA_DECOERR_SEQCMD 0x10
+#define JRSTA_DECOERR_DECOINTERNAL 0x11
+#define JRSTA_DECOERR_SHDESCHDR 0x12
+#define JRSTA_DECOERR_HDRLEN 0x13
+#define JRSTA_DECOERR_BURSTER 0x14
+#define JRSTA_DECOERR_DESCSIGNATURE 0x15
+#define JRSTA_DECOERR_DMA 0x16
+#define JRSTA_DECOERR_BURSTFIFO 0x17
+#define JRSTA_DECOERR_JRRESET 0x1a
+#define JRSTA_DECOERR_JOBFAIL 0x1b
+#define JRSTA_DECOERR_DNRERR 0x80
+#define JRSTA_DECOERR_UNDEFPCL 0x81
+#define JRSTA_DECOERR_PDBERR 0x82
+#define JRSTA_DECOERR_ANRPLY_LATE 0x83
+#define JRSTA_DECOERR_ANRPLY_REPLAY 0x84
+#define JRSTA_DECOERR_SEQOVF 0x85
+#define JRSTA_DECOERR_INVSIGN 0x86
+#define JRSTA_DECOERR_DSASIGN 0x87
+
+#define JRSTA_CCBERR_JUMP 0x08000000
+#define JRSTA_CCBERR_INDEX_MASK 0xff00
+#define JRSTA_CCBERR_INDEX_SHIFT 8
+#define JRSTA_CCBERR_CHAID_MASK 0x00f0
+#define JRSTA_CCBERR_CHAID_SHIFT 4
+#define JRSTA_CCBERR_ERRID_MASK 0x000f
+
+#define JRSTA_CCBERR_CHAID_AES (0x01 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_DES (0x02 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_ARC4 (0x03 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_MD (0x04 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_RNG (0x05 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_SNOW (0x06 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_KASUMI (0x07 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_PK (0x08 << JRSTA_CCBERR_CHAID_SHIFT)
+#define JRSTA_CCBERR_CHAID_CRC (0x09 << JRSTA_CCBERR_CHAID_SHIFT)
+
+#define JRSTA_CCBERR_ERRID_NONE 0x00
+#define JRSTA_CCBERR_ERRID_MODE 0x01
+#define JRSTA_CCBERR_ERRID_DATASIZ 0x02
+#define JRSTA_CCBERR_ERRID_KEYSIZ 0x03
+#define JRSTA_CCBERR_ERRID_PKAMEMSZ 0x04
+#define JRSTA_CCBERR_ERRID_PKBMEMSZ 0x05
+#define JRSTA_CCBERR_ERRID_SEQUENCE 0x06
+#define JRSTA_CCBERR_ERRID_PKDIVZRO 0x07
+#define JRSTA_CCBERR_ERRID_PKMODEVN 0x08
+#define JRSTA_CCBERR_ERRID_KEYPARIT 0x09
+#define JRSTA_CCBERR_ERRID_ICVCHK 0x0a
+#define JRSTA_CCBERR_ERRID_HARDWARE 0x0b
+#define JRSTA_CCBERR_ERRID_CCMAAD 0x0c
+#define JRSTA_CCBERR_ERRID_INVCHA 0x0f
+
+#define JRINT_ERR_INDEX_MASK 0x3fff0000
+#define JRINT_ERR_INDEX_SHIFT 16
+#define JRINT_ERR_TYPE_MASK 0xf00
+#define JRINT_ERR_TYPE_SHIFT 8
+#define JRINT_ERR_HALT_MASK 0xc
+#define JRINT_ERR_HALT_SHIFT 2
+#define JRINT_ERR_HALT_INPROGRESS 0x4
+#define JRINT_ERR_HALT_COMPLETE 0x8
+#define JRINT_JR_ERROR 0x02
+#define JRINT_JR_INT 0x01
+
+#define JRINT_ERR_TYPE_WRITE 1
+#define JRINT_ERR_TYPE_BAD_INPADDR 3
+#define JRINT_ERR_TYPE_BAD_OUTADDR 4
+#define JRINT_ERR_TYPE_INV_INPWRT 5
+#define JRINT_ERR_TYPE_INV_OUTWRT 6
+#define JRINT_ERR_TYPE_RESET 7
+#define JRINT_ERR_TYPE_REMOVE_OFL 8
+#define JRINT_ERR_TYPE_ADD_OFL 9
+
+#define JRCFG_SOE 0x04
+#define JRCFG_ICEN 0x02
+#define JRCFG_IMSK 0x01
+#define JRCFG_ICDCT_SHIFT 8
+#define JRCFG_ICTT_SHIFT 16
+
+#define JRCR_RESET 0x01
+
+/*
+ * caam_assurance - Assurance Controller View
+ * base + 0x6000 padded out to 0x1000
+ */
+
+struct rtic_element {
+ u64 address;
+ u32 rsvd;
+ u32 length;
+};
+
+struct rtic_block {
+ struct rtic_element element[2];
+};
+
+struct rtic_memhash {
+ u32 memhash_be[32];
+ u32 memhash_le[32];
+};
+
+struct caam_assurance {
+ /* Status/Command/Watchdog */
+ u32 rsvd1;
+ u32 status; /* RSTA - Status */
+ u32 rsvd2;
+ u32 cmd; /* RCMD - Command */
+ u32 rsvd3;
+ u32 ctrl; /* RCTL - Control */
+ u32 rsvd4;
+ u32 throttle; /* RTHR - Throttle */
+ u32 rsvd5[2];
+ u64 watchdog; /* RWDOG - Watchdog Timer */
+ u32 rsvd6;
+ u32 rend; /* REND - Endian corrections */
+ u32 rsvd7[50];
+
+ /* Block access/configuration @ 100/110/120/130 */
+ struct rtic_block memblk[4]; /* Memory Blocks A-D */
+ u32 rsvd8[32];
+
+ /* Block hashes @ 200/300/400/500 */
+ struct rtic_memhash hash[4]; /* Block hash values A-D */
+ u32 rsvd_3[640];
+};
+
+/*
+ * caam_queue_if - QI configuration and control
+ * starts base + 0x7000, padded out to 0x1000 long
+ */
+
+struct caam_queue_if {
+ u32 qi_control_hi; /* QICTL - QI Control */
+ u32 qi_control_lo;
+ u32 rsvd1;
+ u32 qi_status; /* QISTA - QI Status */
+ u32 qi_deq_cfg_hi; /* QIDQC - QI Dequeue Configuration */
+ u32 qi_deq_cfg_lo;
+ u32 qi_enq_cfg_hi; /* QISEQC - QI Enqueue Command */
+ u32 qi_enq_cfg_lo;
+ u32 rsvd2[1016];
+};
+
+/* QI control bits - low word */
+#define QICTL_DQEN 0x01 /* Enable frame pop */
+#define QICTL_STOP 0x02 /* Stop dequeue/enqueue */
+#define QICTL_SOE 0x04 /* Stop on error */
+
+/* QI control bits - high word */
+#define QICTL_MBSI 0x01
+#define QICTL_MHWSI 0x02
+#define QICTL_MWSI 0x04
+#define QICTL_MDWSI 0x08
+#define QICTL_CBSI 0x10 /* CtrlDataByteSwapInput */
+#define QICTL_CHWSI 0x20 /* CtrlDataHalfSwapInput */
+#define QICTL_CWSI 0x40 /* CtrlDataWordSwapInput */
+#define QICTL_CDWSI 0x80 /* CtrlDataDWordSwapInput */
+#define QICTL_MBSO 0x0100
+#define QICTL_MHWSO 0x0200
+#define QICTL_MWSO 0x0400
+#define QICTL_MDWSO 0x0800
+#define QICTL_CBSO 0x1000 /* CtrlDataByteSwapOutput */
+#define QICTL_CHWSO 0x2000 /* CtrlDataHalfSwapOutput */
+#define QICTL_CWSO 0x4000 /* CtrlDataWordSwapOutput */
+#define QICTL_CDWSO 0x8000 /* CtrlDataDWordSwapOutput */
+#define QICTL_DMBS 0x010000
+#define QICTL_EPO 0x020000
+
+/* QI status bits */
+#define QISTA_PHRDERR 0x01 /* PreHeader Read Error */
+#define QISTA_CFRDERR 0x02 /* Compound Frame Read Error */
+#define QISTA_OFWRERR 0x04 /* Output Frame Read Error */
+#define QISTA_BPDERR 0x08 /* Buffer Pool Depleted */
+#define QISTA_BTSERR 0x10 /* Buffer Undersize */
+#define QISTA_CFWRERR 0x20 /* Compound Frame Write Err */
+#define QISTA_STOPD 0x80000000 /* QI Stopped (see QICTL) */
+
+/* deco_sg_table - DECO view of scatter/gather table */
+struct deco_sg_table {
+ u64 addr; /* Segment Address */
+ u32 elen; /* E, F bits + 30-bit length */
+ u32 bpid_offset; /* Buffer Pool ID + 16-bit length */
+};
+
+/*
+ * caam_deco - descriptor controller - CHA cluster block
+ *
+ * Only accessible when direct DECO access is turned on
+ * (done in DECORR, via MID programmed in DECOxMID
+ *
+ * 5 typical, base + 0x8000/9000/a000/b000
+ * Padded out to 0x1000 long
+ */
+struct caam_deco {
+ u32 rsvd1;
+ u32 cls1_mode; /* CxC1MR - Class 1 Mode */
+ u32 rsvd2;
+ u32 cls1_keysize; /* CxC1KSR - Class 1 Key Size */
+ u32 cls1_datasize_hi; /* CxC1DSR - Class 1 Data Size */
+ u32 cls1_datasize_lo;
+ u32 rsvd3;
+ u32 cls1_icvsize; /* CxC1ICVSR - Class 1 ICV size */
+ u32 rsvd4[5];
+ u32 cha_ctrl; /* CCTLR - CHA control */
+ u32 rsvd5;
+ u32 irq_crtl; /* CxCIRQ - CCB interrupt done/error/clear */
+ u32 rsvd6;
+ u32 clr_written; /* CxCWR - Clear-Written */
+ u32 ccb_status_hi; /* CxCSTA - CCB Status/Error */
+ u32 ccb_status_lo;
+ u32 rsvd7[3];
+ u32 aad_size; /* CxAADSZR - Current AAD Size */
+ u32 rsvd8;
+ u32 cls1_iv_size; /* CxC1IVSZR - Current Class 1 IV Size */
+ u32 rsvd9[7];
+ u32 pkha_a_size; /* PKASZRx - Size of PKHA A */
+ u32 rsvd10;
+ u32 pkha_b_size; /* PKBSZRx - Size of PKHA B */
+ u32 rsvd11;
+ u32 pkha_n_size; /* PKNSZRx - Size of PKHA N */
+ u32 rsvd12;
+ u32 pkha_e_size; /* PKESZRx - Size of PKHA E */
+ u32 rsvd13[24];
+ u32 cls1_ctx[16]; /* CxC1CTXR - Class 1 Context @100 */
+ u32 rsvd14[48];
+ u32 cls1_key[8]; /* CxC1KEYR - Class 1 Key @200 */
+ u32 rsvd15[121];
+ u32 cls2_mode; /* CxC2MR - Class 2 Mode */
+ u32 rsvd16;
+ u32 cls2_keysize; /* CxX2KSR - Class 2 Key Size */
+ u32 cls2_datasize_hi; /* CxC2DSR - Class 2 Data Size */
+ u32 cls2_datasize_lo;
+ u32 rsvd17;
+ u32 cls2_icvsize; /* CxC2ICVSZR - Class 2 ICV Size */
+ u32 rsvd18[56];
+ u32 cls2_ctx[18]; /* CxC2CTXR - Class 2 Context @500 */
+ u32 rsvd19[46];
+ u32 cls2_key[32]; /* CxC2KEYR - Class2 Key @600 */
+ u32 rsvd20[84];
+ u32 inp_infofifo_hi; /* CxIFIFO - Input Info FIFO @7d0 */
+ u32 inp_infofifo_lo;
+ u32 rsvd21[2];
+ u64 inp_datafifo; /* CxDFIFO - Input Data FIFO */
+ u32 rsvd22[2];
+ u64 out_datafifo; /* CxOFIFO - Output Data FIFO */
+ u32 rsvd23[2];
+ u32 jr_ctl_hi; /* CxJRR - JobR Control Register @800 */
+ u32 jr_ctl_lo;
+ u64 jr_descaddr; /* CxDADR - JobR Descriptor Address */
+ u32 op_status_hi; /* DxOPSTA - DECO Operation Status */
+ u32 op_status_lo;
+ u32 rsvd24[2];
+ u32 liodn; /* DxLSR - DECO LIODN Status - non-seq */
+ u32 td_liodn; /* DxLSR - DECO LIODN Status - trustdesc */
+ u32 rsvd26[6];
+ u64 math[4]; /* DxMTH - Math register */
+ u32 rsvd27[8];
+ struct deco_sg_table gthr_tbl[4]; /* DxGTR - Gather Tables */
+ u32 rsvd28[16];
+ struct deco_sg_table sctr_tbl[4]; /* DxSTR - Scatter Tables */
+ u32 rsvd29[48];
+ u32 descbuf[64]; /* DxDESB - Descriptor buffer */
+ u32 rsvd30[320];
+};
+
+/*
+ * Current top-level view of memory map is:
+ *
+ * 0x0000 - 0x0fff - CAAM Top-Level Control
+ * 0x1000 - 0x1fff - Job Ring 0
+ * 0x2000 - 0x2fff - Job Ring 1
+ * 0x3000 - 0x3fff - Job Ring 2
+ * 0x4000 - 0x4fff - Job Ring 3
+ * 0x5000 - 0x5fff - (unused)
+ * 0x6000 - 0x6fff - Assurance Controller
+ * 0x7000 - 0x7fff - Queue Interface
+ * 0x8000 - 0x8fff - DECO-CCB 0
+ * 0x9000 - 0x9fff - DECO-CCB 1
+ * 0xa000 - 0xafff - DECO-CCB 2
+ * 0xb000 - 0xbfff - DECO-CCB 3
+ * 0xc000 - 0xcfff - DECO-CCB 4
+ *
+ * caam_full describes the full register view of CAAM if useful,
+ * although many configurations may choose to implement parts of
+ * the register map separately, in differing privilege regions
+ */
+struct caam_full {
+ struct caam_ctrl __iomem ctrl;
+ struct caam_job_ring jr[4];
+ u64 rsvd[512];
+ struct caam_assurance assure;
+ struct caam_queue_if qi;
+ struct caam_deco *deco;
+};
+
+#endif /* REGS_H */
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index c99305a..3cf303e 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -133,7 +133,6 @@
int extra_bytes; /* unprocessed bytes in buffer */
enum hash_op op;
int count_add;
- struct scatterlist dummysg;
};
static void compute_aes_dec_key(struct mv_ctx *ctx)
@@ -187,9 +186,9 @@
{
int ret;
void *sbuf;
- int copied = 0;
+ int copy_len;
- while (1) {
+ while (len) {
if (!p->sg_src_left) {
ret = sg_miter_next(&p->src_sg_it);
BUG_ON(!ret);
@@ -199,19 +198,14 @@
sbuf = p->src_sg_it.addr + p->src_start;
- if (p->sg_src_left <= len - copied) {
- memcpy(dbuf + copied, sbuf, p->sg_src_left);
- copied += p->sg_src_left;
- p->sg_src_left = 0;
- if (copied >= len)
- break;
- } else {
- int copy_len = len - copied;
- memcpy(dbuf + copied, sbuf, copy_len);
- p->src_start += copy_len;
- p->sg_src_left -= copy_len;
- break;
- }
+ copy_len = min(p->sg_src_left, len);
+ memcpy(dbuf, sbuf, copy_len);
+
+ p->src_start += copy_len;
+ p->sg_src_left -= copy_len;
+
+ len -= copy_len;
+ dbuf += copy_len;
}
}
@@ -275,7 +269,6 @@
memcpy(cpg->sram + SRAM_CONFIG, &op,
sizeof(struct sec_accel_config));
- writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
/* GO */
writel(SEC_CMD_EN_SEC_ACCL0, cpg->reg + SEC_ACCEL_CMD);
@@ -302,6 +295,7 @@
static void mv_process_hash_current(int first_block)
{
struct ahash_request *req = ahash_request_cast(cpg->cur_req);
+ const struct mv_tfm_hash_ctx *tfm_ctx = crypto_tfm_ctx(req->base.tfm);
struct mv_req_hash_ctx *req_ctx = ahash_request_ctx(req);
struct req_progress *p = &cpg->p;
struct sec_accel_config op = { 0 };
@@ -314,6 +308,8 @@
break;
case COP_HMAC_SHA1:
op.config = CFG_OP_MAC_ONLY | CFG_MACM_HMAC_SHA1;
+ memcpy(cpg->sram + SRAM_HMAC_IV_IN,
+ tfm_ctx->ivs, sizeof(tfm_ctx->ivs));
break;
}
@@ -345,11 +341,16 @@
op.config |= CFG_LAST_FRAG;
else
op.config |= CFG_MID_FRAG;
+
+ writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
+ writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
+ writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
+ writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
+ writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
}
memcpy(cpg->sram + SRAM_CONFIG, &op, sizeof(struct sec_accel_config));
- writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
/* GO */
writel(SEC_CMD_EN_SEC_ACCL0, cpg->reg + SEC_ACCEL_CMD);
@@ -409,12 +410,6 @@
copy_src_to_buf(&cpg->p, ctx->buffer, ctx->extra_bytes);
sg_miter_stop(&cpg->p.src_sg_it);
- ctx->state[0] = readl(cpg->reg + DIGEST_INITIAL_VAL_A);
- ctx->state[1] = readl(cpg->reg + DIGEST_INITIAL_VAL_B);
- ctx->state[2] = readl(cpg->reg + DIGEST_INITIAL_VAL_C);
- ctx->state[3] = readl(cpg->reg + DIGEST_INITIAL_VAL_D);
- ctx->state[4] = readl(cpg->reg + DIGEST_INITIAL_VAL_E);
-
if (likely(ctx->last_chunk)) {
if (likely(ctx->count <= MAX_HW_HASH_SIZE)) {
memcpy(req->result, cpg->sram + SRAM_DIGEST_BUF,
@@ -422,6 +417,12 @@
(req)));
} else
mv_hash_final_fallback(req);
+ } else {
+ ctx->state[0] = readl(cpg->reg + DIGEST_INITIAL_VAL_A);
+ ctx->state[1] = readl(cpg->reg + DIGEST_INITIAL_VAL_B);
+ ctx->state[2] = readl(cpg->reg + DIGEST_INITIAL_VAL_C);
+ ctx->state[3] = readl(cpg->reg + DIGEST_INITIAL_VAL_D);
+ ctx->state[4] = readl(cpg->reg + DIGEST_INITIAL_VAL_E);
}
}
@@ -480,7 +481,7 @@
int i = 0;
size_t cur_len;
- while (1) {
+ while (sl) {
cur_len = sl[i].length;
++i;
if (total_bytes > cur_len)
@@ -517,29 +518,12 @@
{
struct req_progress *p = &cpg->p;
struct mv_req_hash_ctx *ctx = ahash_request_ctx(req);
- const struct mv_tfm_hash_ctx *tfm_ctx = crypto_tfm_ctx(req->base.tfm);
int num_sgs, hw_bytes, old_extra_bytes, rc;
cpg->cur_req = &req->base;
memset(p, 0, sizeof(struct req_progress));
hw_bytes = req->nbytes + ctx->extra_bytes;
old_extra_bytes = ctx->extra_bytes;
- if (unlikely(ctx->extra_bytes)) {
- memcpy(cpg->sram + SRAM_DATA_IN_START, ctx->buffer,
- ctx->extra_bytes);
- p->crypt_len = ctx->extra_bytes;
- }
-
- memcpy(cpg->sram + SRAM_HMAC_IV_IN, tfm_ctx->ivs, sizeof(tfm_ctx->ivs));
-
- if (unlikely(!ctx->first_hash)) {
- writel(ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
- writel(ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
- writel(ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
- writel(ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
- writel(ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
- }
-
ctx->extra_bytes = hw_bytes % SHA1_BLOCK_SIZE;
if (ctx->extra_bytes != 0
&& (!ctx->last_chunk || ctx->count > MAX_HW_HASH_SIZE))
@@ -555,6 +539,12 @@
p->complete = mv_hash_algo_completion;
p->process = mv_process_hash_current;
+ if (unlikely(old_extra_bytes)) {
+ memcpy(cpg->sram + SRAM_DATA_IN_START, ctx->buffer,
+ old_extra_bytes);
+ p->crypt_len = old_extra_bytes;
+ }
+
mv_process_hash_current(1);
} else {
copy_src_to_buf(p, ctx->buffer + old_extra_bytes,
@@ -603,9 +593,7 @@
if (async_req->tfm->__crt_alg->cra_type !=
&crypto_ahash_type) {
struct ablkcipher_request *req =
- container_of(async_req,
- struct ablkcipher_request,
- base);
+ ablkcipher_request_cast(async_req);
mv_start_new_crypt_req(req);
} else {
struct ahash_request *req =
@@ -722,19 +710,13 @@
static int mv_hash_final(struct ahash_request *req)
{
struct mv_req_hash_ctx *ctx = ahash_request_ctx(req);
- /* dummy buffer of 4 bytes */
- sg_init_one(&ctx->dummysg, ctx->buffer, 4);
- /* I think I'm allowed to do that... */
- ahash_request_set_crypt(req, &ctx->dummysg, req->result, 0);
+
mv_update_hash_req_ctx(ctx, 1, 0);
return mv_handle_req(&req->base);
}
static int mv_hash_finup(struct ahash_request *req)
{
- if (!req->nbytes)
- return mv_hash_final(req);
-
mv_update_hash_req_ctx(ahash_request_ctx(req), 1, req->nbytes);
return mv_handle_req(&req->base);
}
@@ -1065,14 +1047,21 @@
writel(SEC_INT_ACCEL0_DONE, cpg->reg + SEC_ACCEL_INT_MASK);
writel(SEC_CFG_STOP_DIG_ERR, cpg->reg + SEC_ACCEL_CFG);
+ writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
ret = crypto_register_alg(&mv_aes_alg_ecb);
- if (ret)
+ if (ret) {
+ printk(KERN_WARNING MV_CESA
+ "Could not register aes-ecb driver\n");
goto err_irq;
+ }
ret = crypto_register_alg(&mv_aes_alg_cbc);
- if (ret)
+ if (ret) {
+ printk(KERN_WARNING MV_CESA
+ "Could not register aes-cbc driver\n");
goto err_unreg_ecb;
+ }
ret = crypto_register_ahash(&mv_sha1_alg);
if (ret == 0)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 465cde3..ba8f1ea 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -78,7 +78,6 @@
#define FLAGS_SHA1 0x0010
#define FLAGS_DMA_ACTIVE 0x0020
#define FLAGS_OUTPUT_READY 0x0040
-#define FLAGS_CLEAN 0x0080
#define FLAGS_INIT 0x0100
#define FLAGS_CPU 0x0200
#define FLAGS_HMAC 0x0400
@@ -511,26 +510,6 @@
return 0;
}
-static void omap_sham_cleanup(struct ahash_request *req)
-{
- struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
- struct omap_sham_dev *dd = ctx->dd;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->lock, flags);
- if (ctx->flags & FLAGS_CLEAN) {
- spin_unlock_irqrestore(&dd->lock, flags);
- return;
- }
- ctx->flags |= FLAGS_CLEAN;
- spin_unlock_irqrestore(&dd->lock, flags);
-
- if (ctx->digcnt)
- omap_sham_copy_ready_hash(req);
-
- dev_dbg(dd->dev, "digcnt: %d, bufcnt: %d\n", ctx->digcnt, ctx->bufcnt);
-}
-
static int omap_sham_init(struct ahash_request *req)
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
@@ -618,9 +597,8 @@
return err;
}
-static int omap_sham_finish_req_hmac(struct ahash_request *req)
+static int omap_sham_finish_hmac(struct ahash_request *req)
{
- struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
struct omap_sham_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
struct omap_sham_hmac_ctx *bctx = tctx->base;
int bs = crypto_shash_blocksize(bctx->shash);
@@ -635,7 +613,24 @@
return crypto_shash_init(&desc.shash) ?:
crypto_shash_update(&desc.shash, bctx->opad, bs) ?:
- crypto_shash_finup(&desc.shash, ctx->digest, ds, ctx->digest);
+ crypto_shash_finup(&desc.shash, req->result, ds, req->result);
+}
+
+static int omap_sham_finish(struct ahash_request *req)
+{
+ struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
+ struct omap_sham_dev *dd = ctx->dd;
+ int err = 0;
+
+ if (ctx->digcnt) {
+ omap_sham_copy_ready_hash(req);
+ if (ctx->flags & FLAGS_HMAC)
+ err = omap_sham_finish_hmac(req);
+ }
+
+ dev_dbg(dd->dev, "digcnt: %d, bufcnt: %d\n", ctx->digcnt, ctx->bufcnt);
+
+ return err;
}
static void omap_sham_finish_req(struct ahash_request *req, int err)
@@ -645,15 +640,12 @@
if (!err) {
omap_sham_copy_hash(ctx->dd->req, 1);
- if (ctx->flags & FLAGS_HMAC)
- err = omap_sham_finish_req_hmac(req);
+ if (ctx->flags & FLAGS_FINAL)
+ err = omap_sham_finish(req);
} else {
ctx->flags |= FLAGS_ERROR;
}
- if ((ctx->flags & FLAGS_FINAL) || err)
- omap_sham_cleanup(req);
-
clk_disable(dd->iclk);
dd->flags &= ~FLAGS_BUSY;
@@ -809,22 +801,21 @@
static int omap_sham_final(struct ahash_request *req)
{
struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
- int err = 0;
ctx->flags |= FLAGS_FINUP;
- if (!(ctx->flags & FLAGS_ERROR)) {
- /* OMAP HW accel works only with buffers >= 9 */
- /* HMAC is always >= 9 because of ipad */
- if ((ctx->digcnt + ctx->bufcnt) < 9)
- err = omap_sham_final_shash(req);
- else if (ctx->bufcnt)
- return omap_sham_enqueue(req, OP_FINAL);
- }
+ if (ctx->flags & FLAGS_ERROR)
+ return 0; /* uncompleted hash is not needed */
- omap_sham_cleanup(req);
+ /* OMAP HW accel works only with buffers >= 9 */
+ /* HMAC is always >= 9 because ipad == block size */
+ if ((ctx->digcnt + ctx->bufcnt) < 9)
+ return omap_sham_final_shash(req);
+ else if (ctx->bufcnt)
+ return omap_sham_enqueue(req, OP_FINAL);
- return err;
+ /* copy ready hash (+ finalize hmac) */
+ return omap_sham_finish(req);
}
static int omap_sham_finup(struct ahash_request *req)
@@ -835,7 +826,7 @@
ctx->flags |= FLAGS_FINUP;
err1 = omap_sham_update(req);
- if (err1 == -EINPROGRESS)
+ if (err1 == -EINPROGRESS || err1 == -EBUSY)
return err1;
/*
* final() has to be always called to cleanup resources
@@ -890,8 +881,6 @@
struct omap_sham_ctx *tctx = crypto_tfm_ctx(tfm);
const char *alg_name = crypto_tfm_alg_name(tfm);
- pr_info("enter\n");
-
/* Allocate a fallback and abort if it failed. */
tctx->fallback = crypto_alloc_shash(alg_name, 0,
CRYPTO_ALG_NEED_FALLBACK);
@@ -1297,7 +1286,8 @@
pr_info("loading %s driver\n", "omap-sham");
if (!cpu_class_is_omap2() ||
- omap_type() != OMAP2_DEVICE_TYPE_SEC) {
+ (omap_type() != OMAP2_DEVICE_TYPE_SEC &&
+ omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
pr_err("Unsupported cpu\n");
return -ENODEV;
}
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index adf075b..06bdb4b 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -288,9 +288,250 @@
}
};
+/* Add two shash_alg instance for hardware-implemented *
+* multiple-parts hash supported by VIA Nano Processor.*/
+static int padlock_sha1_init_nano(struct shash_desc *desc)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ *sctx = (struct sha1_state){
+ .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
+ };
+
+ return 0;
+}
+
+static int padlock_sha1_update_nano(struct shash_desc *desc,
+ const u8 *data, unsigned int len)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+ unsigned int partial, done;
+ const u8 *src;
+ /*The PHE require the out buffer must 128 bytes and 16-bytes aligned*/
+ u8 buf[128 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__
+ ((aligned(STACK_ALIGN)));
+ u8 *dst = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
+ int ts_state;
+
+ partial = sctx->count & 0x3f;
+ sctx->count += len;
+ done = 0;
+ src = data;
+ memcpy(dst, (u8 *)(sctx->state), SHA1_DIGEST_SIZE);
+
+ if ((partial + len) >= SHA1_BLOCK_SIZE) {
+
+ /* Append the bytes in state's buffer to a block to handle */
+ if (partial) {
+ done = -partial;
+ memcpy(sctx->buffer + partial, data,
+ done + SHA1_BLOCK_SIZE);
+ src = sctx->buffer;
+ ts_state = irq_ts_save();
+ asm volatile (".byte 0xf3,0x0f,0xa6,0xc8"
+ : "+S"(src), "+D"(dst) \
+ : "a"((long)-1), "c"((unsigned long)1));
+ irq_ts_restore(ts_state);
+ done += SHA1_BLOCK_SIZE;
+ src = data + done;
+ }
+
+ /* Process the left bytes from the input data */
+ if (len - done >= SHA1_BLOCK_SIZE) {
+ ts_state = irq_ts_save();
+ asm volatile (".byte 0xf3,0x0f,0xa6,0xc8"
+ : "+S"(src), "+D"(dst)
+ : "a"((long)-1),
+ "c"((unsigned long)((len - done) / SHA1_BLOCK_SIZE)));
+ irq_ts_restore(ts_state);
+ done += ((len - done) - (len - done) % SHA1_BLOCK_SIZE);
+ src = data + done;
+ }
+ partial = 0;
+ }
+ memcpy((u8 *)(sctx->state), dst, SHA1_DIGEST_SIZE);
+ memcpy(sctx->buffer + partial, src, len - done);
+
+ return 0;
+}
+
+static int padlock_sha1_final_nano(struct shash_desc *desc, u8 *out)
+{
+ struct sha1_state *state = (struct sha1_state *)shash_desc_ctx(desc);
+ unsigned int partial, padlen;
+ __be64 bits;
+ static const u8 padding[64] = { 0x80, };
+
+ bits = cpu_to_be64(state->count << 3);
+
+ /* Pad out to 56 mod 64 */
+ partial = state->count & 0x3f;
+ padlen = (partial < 56) ? (56 - partial) : ((64+56) - partial);
+ padlock_sha1_update_nano(desc, padding, padlen);
+
+ /* Append length field bytes */
+ padlock_sha1_update_nano(desc, (const u8 *)&bits, sizeof(bits));
+
+ /* Swap to output */
+ padlock_output_block((uint32_t *)(state->state), (uint32_t *)out, 5);
+
+ return 0;
+}
+
+static int padlock_sha256_init_nano(struct shash_desc *desc)
+{
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+
+ *sctx = (struct sha256_state){
+ .state = { SHA256_H0, SHA256_H1, SHA256_H2, SHA256_H3, \
+ SHA256_H4, SHA256_H5, SHA256_H6, SHA256_H7},
+ };
+
+ return 0;
+}
+
+static int padlock_sha256_update_nano(struct shash_desc *desc, const u8 *data,
+ unsigned int len)
+{
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+ unsigned int partial, done;
+ const u8 *src;
+ /*The PHE require the out buffer must 128 bytes and 16-bytes aligned*/
+ u8 buf[128 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__
+ ((aligned(STACK_ALIGN)));
+ u8 *dst = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
+ int ts_state;
+
+ partial = sctx->count & 0x3f;
+ sctx->count += len;
+ done = 0;
+ src = data;
+ memcpy(dst, (u8 *)(sctx->state), SHA256_DIGEST_SIZE);
+
+ if ((partial + len) >= SHA256_BLOCK_SIZE) {
+
+ /* Append the bytes in state's buffer to a block to handle */
+ if (partial) {
+ done = -partial;
+ memcpy(sctx->buf + partial, data,
+ done + SHA256_BLOCK_SIZE);
+ src = sctx->buf;
+ ts_state = irq_ts_save();
+ asm volatile (".byte 0xf3,0x0f,0xa6,0xd0"
+ : "+S"(src), "+D"(dst)
+ : "a"((long)-1), "c"((unsigned long)1));
+ irq_ts_restore(ts_state);
+ done += SHA256_BLOCK_SIZE;
+ src = data + done;
+ }
+
+ /* Process the left bytes from input data*/
+ if (len - done >= SHA256_BLOCK_SIZE) {
+ ts_state = irq_ts_save();
+ asm volatile (".byte 0xf3,0x0f,0xa6,0xd0"
+ : "+S"(src), "+D"(dst)
+ : "a"((long)-1),
+ "c"((unsigned long)((len - done) / 64)));
+ irq_ts_restore(ts_state);
+ done += ((len - done) - (len - done) % 64);
+ src = data + done;
+ }
+ partial = 0;
+ }
+ memcpy((u8 *)(sctx->state), dst, SHA256_DIGEST_SIZE);
+ memcpy(sctx->buf + partial, src, len - done);
+
+ return 0;
+}
+
+static int padlock_sha256_final_nano(struct shash_desc *desc, u8 *out)
+{
+ struct sha256_state *state =
+ (struct sha256_state *)shash_desc_ctx(desc);
+ unsigned int partial, padlen;
+ __be64 bits;
+ static const u8 padding[64] = { 0x80, };
+
+ bits = cpu_to_be64(state->count << 3);
+
+ /* Pad out to 56 mod 64 */
+ partial = state->count & 0x3f;
+ padlen = (partial < 56) ? (56 - partial) : ((64+56) - partial);
+ padlock_sha256_update_nano(desc, padding, padlen);
+
+ /* Append length field bytes */
+ padlock_sha256_update_nano(desc, (const u8 *)&bits, sizeof(bits));
+
+ /* Swap to output */
+ padlock_output_block((uint32_t *)(state->state), (uint32_t *)out, 8);
+
+ return 0;
+}
+
+static int padlock_sha_export_nano(struct shash_desc *desc,
+ void *out)
+{
+ int statesize = crypto_shash_statesize(desc->tfm);
+ void *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, statesize);
+ return 0;
+}
+
+static int padlock_sha_import_nano(struct shash_desc *desc,
+ const void *in)
+{
+ int statesize = crypto_shash_statesize(desc->tfm);
+ void *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, statesize);
+ return 0;
+}
+
+static struct shash_alg sha1_alg_nano = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .init = padlock_sha1_init_nano,
+ .update = padlock_sha1_update_nano,
+ .final = padlock_sha1_final_nano,
+ .export = padlock_sha_export_nano,
+ .import = padlock_sha_import_nano,
+ .descsize = sizeof(struct sha1_state),
+ .statesize = sizeof(struct sha1_state),
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "sha1-padlock-nano",
+ .cra_priority = PADLOCK_CRA_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+static struct shash_alg sha256_alg_nano = {
+ .digestsize = SHA256_DIGEST_SIZE,
+ .init = padlock_sha256_init_nano,
+ .update = padlock_sha256_update_nano,
+ .final = padlock_sha256_final_nano,
+ .export = padlock_sha_export_nano,
+ .import = padlock_sha_import_nano,
+ .descsize = sizeof(struct sha256_state),
+ .statesize = sizeof(struct sha256_state),
+ .base = {
+ .cra_name = "sha256",
+ .cra_driver_name = "sha256-padlock-nano",
+ .cra_priority = PADLOCK_CRA_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA256_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
static int __init padlock_init(void)
{
int rc = -ENODEV;
+ struct cpuinfo_x86 *c = &cpu_data(0);
+ struct shash_alg *sha1;
+ struct shash_alg *sha256;
if (!cpu_has_phe) {
printk(KERN_NOTICE PFX "VIA PadLock Hash Engine not detected.\n");
@@ -302,11 +543,21 @@
return -ENODEV;
}
- rc = crypto_register_shash(&sha1_alg);
+ /* Register the newly added algorithm module if on *
+ * VIA Nano processor, or else just do as before */
+ if (c->x86_model < 0x0f) {
+ sha1 = &sha1_alg;
+ sha256 = &sha256_alg;
+ } else {
+ sha1 = &sha1_alg_nano;
+ sha256 = &sha256_alg_nano;
+ }
+
+ rc = crypto_register_shash(sha1);
if (rc)
goto out;
- rc = crypto_register_shash(&sha256_alg);
+ rc = crypto_register_shash(sha256);
if (rc)
goto out_unreg1;
@@ -315,7 +566,8 @@
return 0;
out_unreg1:
- crypto_unregister_shash(&sha1_alg);
+ crypto_unregister_shash(sha1);
+
out:
printk(KERN_ERR PFX "VIA PadLock SHA1/SHA256 initialization failed.\n");
return rc;
@@ -323,8 +575,15 @@
static void __exit padlock_fini(void)
{
- crypto_unregister_shash(&sha1_alg);
- crypto_unregister_shash(&sha256_alg);
+ struct cpuinfo_x86 *c = &cpu_data(0);
+
+ if (c->x86_model >= 0x0f) {
+ crypto_unregister_shash(&sha1_alg_nano);
+ crypto_unregister_shash(&sha256_alg_nano);
+ } else {
+ crypto_unregister_shash(&sha1_alg);
+ crypto_unregister_shash(&sha256_alg);
+ }
}
module_init(padlock_init);
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index b092d0a..230b5b8 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -176,6 +176,8 @@
u8 salt[AES_BLOCK_SIZE];
};
+static int spacc_ablk_submit(struct spacc_req *req);
+
static inline struct spacc_alg *to_spacc_alg(struct crypto_alg *alg)
{
return alg ? container_of(alg, struct spacc_alg, alg) : NULL;
@@ -666,6 +668,24 @@
return -EINPROGRESS;
}
+static int spacc_req_submit(struct spacc_req *req);
+
+static void spacc_push(struct spacc_engine *engine)
+{
+ struct spacc_req *req;
+
+ while (!list_empty(&engine->pending) &&
+ engine->in_flight + 1 <= engine->fifo_sz) {
+
+ ++engine->in_flight;
+ req = list_first_entry(&engine->pending, struct spacc_req,
+ list);
+ list_move_tail(&req->list, &engine->in_progress);
+
+ req->result = spacc_req_submit(req);
+ }
+}
+
/*
* Setup an AEAD request for processing. This will configure the engine, load
* the context and then start the packet processing.
@@ -698,7 +718,8 @@
err = -EINPROGRESS;
spin_lock_irqsave(&engine->hw_lock, flags);
- if (unlikely(spacc_fifo_cmd_full(engine))) {
+ if (unlikely(spacc_fifo_cmd_full(engine)) ||
+ engine->in_flight + 1 > engine->fifo_sz) {
if (!(req->base.flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) {
err = -EBUSY;
spin_unlock_irqrestore(&engine->hw_lock, flags);
@@ -706,9 +727,8 @@
}
list_add_tail(&dev_req->list, &engine->pending);
} else {
- ++engine->in_flight;
- list_add_tail(&dev_req->list, &engine->in_progress);
- spacc_aead_submit(dev_req);
+ list_add_tail(&dev_req->list, &engine->pending);
+ spacc_push(engine);
}
spin_unlock_irqrestore(&engine->hw_lock, flags);
@@ -1041,7 +1061,8 @@
* we either stick it on the end of a pending list if we can backlog,
* or bailout with an error if not.
*/
- if (unlikely(spacc_fifo_cmd_full(engine))) {
+ if (unlikely(spacc_fifo_cmd_full(engine)) ||
+ engine->in_flight + 1 > engine->fifo_sz) {
if (!(req->base.flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) {
err = -EBUSY;
spin_unlock_irqrestore(&engine->hw_lock, flags);
@@ -1049,9 +1070,8 @@
}
list_add_tail(&dev_req->list, &engine->pending);
} else {
- ++engine->in_flight;
- list_add_tail(&dev_req->list, &engine->in_progress);
- spacc_ablk_submit(dev_req);
+ list_add_tail(&dev_req->list, &engine->pending);
+ spacc_push(engine);
}
spin_unlock_irqrestore(&engine->hw_lock, flags);
@@ -1139,6 +1159,7 @@
req = list_first_entry(&engine->in_progress, struct spacc_req,
list);
list_move_tail(&req->list, &engine->completed);
+ --engine->in_flight;
/* POP the status register. */
writel(~0, engine->regs + SPA_STAT_POP_REG_OFFSET);
@@ -1208,36 +1229,21 @@
struct spacc_engine *engine = (struct spacc_engine *)data;
struct spacc_req *req, *tmp;
unsigned long flags;
- int num_removed = 0;
LIST_HEAD(completed);
spin_lock_irqsave(&engine->hw_lock, flags);
+
list_splice_init(&engine->completed, &completed);
- spin_unlock_irqrestore(&engine->hw_lock, flags);
-
- list_for_each_entry_safe(req, tmp, &completed, list) {
- ++num_removed;
- req->complete(req);
- }
-
- /* Try and fill the engine back up again. */
- spin_lock_irqsave(&engine->hw_lock, flags);
-
- engine->in_flight -= num_removed;
-
- list_for_each_entry_safe(req, tmp, &engine->pending, list) {
- if (spacc_fifo_cmd_full(engine))
- break;
-
- list_move_tail(&req->list, &engine->in_progress);
- ++engine->in_flight;
- req->result = spacc_req_submit(req);
- }
-
+ spacc_push(engine);
if (engine->in_flight)
mod_timer(&engine->packet_timeout, jiffies + PACKET_TIMEOUT);
spin_unlock_irqrestore(&engine->hw_lock, flags);
+
+ list_for_each_entry_safe(req, tmp, &completed, list) {
+ req->complete(req);
+ list_del(&req->list);
+ }
}
#ifdef CONFIG_PM
diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
new file mode 100644
index 0000000..8115417
--- /dev/null
+++ b/drivers/crypto/s5p-sss.c
@@ -0,0 +1,701 @@
+/*
+ * Cryptographic API.
+ *
+ * Support for Samsung S5PV210 HW acceleration.
+ *
+ * Copyright (C) 2011 NetUP Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+
+#include <crypto/algapi.h>
+#include <crypto/aes.h>
+#include <crypto/ctr.h>
+
+#include <plat/cpu.h>
+#include <plat/dma.h>
+
+#define _SBF(s, v) ((v) << (s))
+#define _BIT(b) _SBF(b, 1)
+
+/* Feed control registers */
+#define SSS_REG_FCINTSTAT 0x0000
+#define SSS_FCINTSTAT_BRDMAINT _BIT(3)
+#define SSS_FCINTSTAT_BTDMAINT _BIT(2)
+#define SSS_FCINTSTAT_HRDMAINT _BIT(1)
+#define SSS_FCINTSTAT_PKDMAINT _BIT(0)
+
+#define SSS_REG_FCINTENSET 0x0004
+#define SSS_FCINTENSET_BRDMAINTENSET _BIT(3)
+#define SSS_FCINTENSET_BTDMAINTENSET _BIT(2)
+#define SSS_FCINTENSET_HRDMAINTENSET _BIT(1)
+#define SSS_FCINTENSET_PKDMAINTENSET _BIT(0)
+
+#define SSS_REG_FCINTENCLR 0x0008
+#define SSS_FCINTENCLR_BRDMAINTENCLR _BIT(3)
+#define SSS_FCINTENCLR_BTDMAINTENCLR _BIT(2)
+#define SSS_FCINTENCLR_HRDMAINTENCLR _BIT(1)
+#define SSS_FCINTENCLR_PKDMAINTENCLR _BIT(0)
+
+#define SSS_REG_FCINTPEND 0x000C
+#define SSS_FCINTPEND_BRDMAINTP _BIT(3)
+#define SSS_FCINTPEND_BTDMAINTP _BIT(2)
+#define SSS_FCINTPEND_HRDMAINTP _BIT(1)
+#define SSS_FCINTPEND_PKDMAINTP _BIT(0)
+
+#define SSS_REG_FCFIFOSTAT 0x0010
+#define SSS_FCFIFOSTAT_BRFIFOFUL _BIT(7)
+#define SSS_FCFIFOSTAT_BRFIFOEMP _BIT(6)
+#define SSS_FCFIFOSTAT_BTFIFOFUL _BIT(5)
+#define SSS_FCFIFOSTAT_BTFIFOEMP _BIT(4)
+#define SSS_FCFIFOSTAT_HRFIFOFUL _BIT(3)
+#define SSS_FCFIFOSTAT_HRFIFOEMP _BIT(2)
+#define SSS_FCFIFOSTAT_PKFIFOFUL _BIT(1)
+#define SSS_FCFIFOSTAT_PKFIFOEMP _BIT(0)
+
+#define SSS_REG_FCFIFOCTRL 0x0014
+#define SSS_FCFIFOCTRL_DESSEL _BIT(2)
+#define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00)
+#define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01)
+#define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02)
+
+#define SSS_REG_FCBRDMAS 0x0020
+#define SSS_REG_FCBRDMAL 0x0024
+#define SSS_REG_FCBRDMAC 0x0028
+#define SSS_FCBRDMAC_BYTESWAP _BIT(1)
+#define SSS_FCBRDMAC_FLUSH _BIT(0)
+
+#define SSS_REG_FCBTDMAS 0x0030
+#define SSS_REG_FCBTDMAL 0x0034
+#define SSS_REG_FCBTDMAC 0x0038
+#define SSS_FCBTDMAC_BYTESWAP _BIT(1)
+#define SSS_FCBTDMAC_FLUSH _BIT(0)
+
+#define SSS_REG_FCHRDMAS 0x0040
+#define SSS_REG_FCHRDMAL 0x0044
+#define SSS_REG_FCHRDMAC 0x0048
+#define SSS_FCHRDMAC_BYTESWAP _BIT(1)
+#define SSS_FCHRDMAC_FLUSH _BIT(0)
+
+#define SSS_REG_FCPKDMAS 0x0050
+#define SSS_REG_FCPKDMAL 0x0054
+#define SSS_REG_FCPKDMAC 0x0058
+#define SSS_FCPKDMAC_BYTESWAP _BIT(3)
+#define SSS_FCPKDMAC_DESCEND _BIT(2)
+#define SSS_FCPKDMAC_TRANSMIT _BIT(1)
+#define SSS_FCPKDMAC_FLUSH _BIT(0)
+
+#define SSS_REG_FCPKDMAO 0x005C
+
+/* AES registers */
+#define SSS_REG_AES_CONTROL 0x4000
+#define SSS_AES_BYTESWAP_DI _BIT(11)
+#define SSS_AES_BYTESWAP_DO _BIT(10)
+#define SSS_AES_BYTESWAP_IV _BIT(9)
+#define SSS_AES_BYTESWAP_CNT _BIT(8)
+#define SSS_AES_BYTESWAP_KEY _BIT(7)
+#define SSS_AES_KEY_CHANGE_MODE _BIT(6)
+#define SSS_AES_KEY_SIZE_128 _SBF(4, 0x00)
+#define SSS_AES_KEY_SIZE_192 _SBF(4, 0x01)
+#define SSS_AES_KEY_SIZE_256 _SBF(4, 0x02)
+#define SSS_AES_FIFO_MODE _BIT(3)
+#define SSS_AES_CHAIN_MODE_ECB _SBF(1, 0x00)
+#define SSS_AES_CHAIN_MODE_CBC _SBF(1, 0x01)
+#define SSS_AES_CHAIN_MODE_CTR _SBF(1, 0x02)
+#define SSS_AES_MODE_DECRYPT _BIT(0)
+
+#define SSS_REG_AES_STATUS 0x4004
+#define SSS_AES_BUSY _BIT(2)
+#define SSS_AES_INPUT_READY _BIT(1)
+#define SSS_AES_OUTPUT_READY _BIT(0)
+
+#define SSS_REG_AES_IN_DATA(s) (0x4010 + (s << 2))
+#define SSS_REG_AES_OUT_DATA(s) (0x4020 + (s << 2))
+#define SSS_REG_AES_IV_DATA(s) (0x4030 + (s << 2))
+#define SSS_REG_AES_CNT_DATA(s) (0x4040 + (s << 2))
+#define SSS_REG_AES_KEY_DATA(s) (0x4080 + (s << 2))
+
+#define SSS_REG(dev, reg) ((dev)->ioaddr + (SSS_REG_##reg))
+#define SSS_READ(dev, reg) __raw_readl(SSS_REG(dev, reg))
+#define SSS_WRITE(dev, reg, val) __raw_writel((val), SSS_REG(dev, reg))
+
+/* HW engine modes */
+#define FLAGS_AES_DECRYPT _BIT(0)
+#define FLAGS_AES_MODE_MASK _SBF(1, 0x03)
+#define FLAGS_AES_CBC _SBF(1, 0x01)
+#define FLAGS_AES_CTR _SBF(1, 0x02)
+
+#define AES_KEY_LEN 16
+#define CRYPTO_QUEUE_LEN 1
+
+struct s5p_aes_reqctx {
+ unsigned long mode;
+};
+
+struct s5p_aes_ctx {
+ struct s5p_aes_dev *dev;
+
+ uint8_t aes_key[AES_MAX_KEY_SIZE];
+ uint8_t nonce[CTR_RFC3686_NONCE_SIZE];
+ int keylen;
+};
+
+struct s5p_aes_dev {
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *ioaddr;
+ int irq_hash;
+ int irq_fc;
+
+ struct ablkcipher_request *req;
+ struct s5p_aes_ctx *ctx;
+ struct scatterlist *sg_src;
+ struct scatterlist *sg_dst;
+
+ struct tasklet_struct tasklet;
+ struct crypto_queue queue;
+ bool busy;
+ spinlock_t lock;
+};
+
+static struct s5p_aes_dev *s5p_dev;
+
+static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
+{
+ SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg));
+ SSS_WRITE(dev, FCBRDMAL, sg_dma_len(sg));
+}
+
+static void s5p_set_dma_outdata(struct s5p_aes_dev *dev, struct scatterlist *sg)
+{
+ SSS_WRITE(dev, FCBTDMAS, sg_dma_address(sg));
+ SSS_WRITE(dev, FCBTDMAL, sg_dma_len(sg));
+}
+
+static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
+{
+ /* holding a lock outside */
+ dev->req->base.complete(&dev->req->base, err);
+ dev->busy = false;
+}
+
+static void s5p_unset_outdata(struct s5p_aes_dev *dev)
+{
+ dma_unmap_sg(dev->dev, dev->sg_dst, 1, DMA_FROM_DEVICE);
+}
+
+static void s5p_unset_indata(struct s5p_aes_dev *dev)
+{
+ dma_unmap_sg(dev->dev, dev->sg_src, 1, DMA_TO_DEVICE);
+}
+
+static int s5p_set_outdata(struct s5p_aes_dev *dev, struct scatterlist *sg)
+{
+ int err;
+
+ if (!IS_ALIGNED(sg_dma_len(sg), AES_BLOCK_SIZE)) {
+ err = -EINVAL;
+ goto exit;
+ }
+ if (!sg_dma_len(sg)) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ err = dma_map_sg(dev->dev, sg, 1, DMA_FROM_DEVICE);
+ if (!err) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ dev->sg_dst = sg;
+ err = 0;
+
+ exit:
+ return err;
+}
+
+static int s5p_set_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
+{
+ int err;
+
+ if (!IS_ALIGNED(sg_dma_len(sg), AES_BLOCK_SIZE)) {
+ err = -EINVAL;
+ goto exit;
+ }
+ if (!sg_dma_len(sg)) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ err = dma_map_sg(dev->dev, sg, 1, DMA_TO_DEVICE);
+ if (!err) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ dev->sg_src = sg;
+ err = 0;
+
+ exit:
+ return err;
+}
+
+static void s5p_aes_tx(struct s5p_aes_dev *dev)
+{
+ int err = 0;
+
+ s5p_unset_outdata(dev);
+
+ if (!sg_is_last(dev->sg_dst)) {
+ err = s5p_set_outdata(dev, sg_next(dev->sg_dst));
+ if (err) {
+ s5p_aes_complete(dev, err);
+ return;
+ }
+
+ s5p_set_dma_outdata(dev, dev->sg_dst);
+ } else
+ s5p_aes_complete(dev, err);
+}
+
+static void s5p_aes_rx(struct s5p_aes_dev *dev)
+{
+ int err;
+
+ s5p_unset_indata(dev);
+
+ if (!sg_is_last(dev->sg_src)) {
+ err = s5p_set_indata(dev, sg_next(dev->sg_src));
+ if (err) {
+ s5p_aes_complete(dev, err);
+ return;
+ }
+
+ s5p_set_dma_indata(dev, dev->sg_src);
+ }
+}
+
+static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
+ uint32_t status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ if (irq == dev->irq_fc) {
+ status = SSS_READ(dev, FCINTSTAT);
+ if (status & SSS_FCINTSTAT_BRDMAINT)
+ s5p_aes_rx(dev);
+ if (status & SSS_FCINTSTAT_BTDMAINT)
+ s5p_aes_tx(dev);
+
+ SSS_WRITE(dev, FCINTPEND, status);
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void s5p_set_aes(struct s5p_aes_dev *dev,
+ uint8_t *key, uint8_t *iv, unsigned int keylen)
+{
+ void __iomem *keystart;
+
+ memcpy(dev->ioaddr + SSS_REG_AES_IV_DATA(0), iv, 0x10);
+
+ if (keylen == AES_KEYSIZE_256)
+ keystart = dev->ioaddr + SSS_REG_AES_KEY_DATA(0);
+ else if (keylen == AES_KEYSIZE_192)
+ keystart = dev->ioaddr + SSS_REG_AES_KEY_DATA(2);
+ else
+ keystart = dev->ioaddr + SSS_REG_AES_KEY_DATA(4);
+
+ memcpy(keystart, key, keylen);
+}
+
+static void s5p_aes_crypt_start(struct s5p_aes_dev *dev, unsigned long mode)
+{
+ struct ablkcipher_request *req = dev->req;
+
+ uint32_t aes_control;
+ int err;
+ unsigned long flags;
+
+ aes_control = SSS_AES_KEY_CHANGE_MODE;
+ if (mode & FLAGS_AES_DECRYPT)
+ aes_control |= SSS_AES_MODE_DECRYPT;
+
+ if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CBC)
+ aes_control |= SSS_AES_CHAIN_MODE_CBC;
+ else if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CTR)
+ aes_control |= SSS_AES_CHAIN_MODE_CTR;
+
+ if (dev->ctx->keylen == AES_KEYSIZE_192)
+ aes_control |= SSS_AES_KEY_SIZE_192;
+ else if (dev->ctx->keylen == AES_KEYSIZE_256)
+ aes_control |= SSS_AES_KEY_SIZE_256;
+
+ aes_control |= SSS_AES_FIFO_MODE;
+
+ /* as a variant it is possible to use byte swapping on DMA side */
+ aes_control |= SSS_AES_BYTESWAP_DI
+ | SSS_AES_BYTESWAP_DO
+ | SSS_AES_BYTESWAP_IV
+ | SSS_AES_BYTESWAP_KEY
+ | SSS_AES_BYTESWAP_CNT;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ SSS_WRITE(dev, FCINTENCLR,
+ SSS_FCINTENCLR_BTDMAINTENCLR | SSS_FCINTENCLR_BRDMAINTENCLR);
+ SSS_WRITE(dev, FCFIFOCTRL, 0x00);
+
+ err = s5p_set_indata(dev, req->src);
+ if (err)
+ goto indata_error;
+
+ err = s5p_set_outdata(dev, req->dst);
+ if (err)
+ goto outdata_error;
+
+ SSS_WRITE(dev, AES_CONTROL, aes_control);
+ s5p_set_aes(dev, dev->ctx->aes_key, req->info, dev->ctx->keylen);
+
+ s5p_set_dma_indata(dev, req->src);
+ s5p_set_dma_outdata(dev, req->dst);
+
+ SSS_WRITE(dev, FCINTENSET,
+ SSS_FCINTENSET_BTDMAINTENSET | SSS_FCINTENSET_BRDMAINTENSET);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return;
+
+ outdata_error:
+ s5p_unset_indata(dev);
+
+ indata_error:
+ s5p_aes_complete(dev, err);
+ spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static void s5p_tasklet_cb(unsigned long data)
+{
+ struct s5p_aes_dev *dev = (struct s5p_aes_dev *)data;
+ struct crypto_async_request *async_req, *backlog;
+ struct s5p_aes_reqctx *reqctx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ backlog = crypto_get_backlog(&dev->queue);
+ async_req = crypto_dequeue_request(&dev->queue);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ if (!async_req)
+ return;
+
+ if (backlog)
+ backlog->complete(backlog, -EINPROGRESS);
+
+ dev->req = ablkcipher_request_cast(async_req);
+ dev->ctx = crypto_tfm_ctx(dev->req->base.tfm);
+ reqctx = ablkcipher_request_ctx(dev->req);
+
+ s5p_aes_crypt_start(dev, reqctx->mode);
+}
+
+static int s5p_aes_handle_req(struct s5p_aes_dev *dev,
+ struct ablkcipher_request *req)
+{
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->busy) {
+ err = -EAGAIN;
+ spin_unlock_irqrestore(&dev->lock, flags);
+ goto exit;
+ }
+ dev->busy = true;
+
+ err = ablkcipher_enqueue_request(&dev->queue, req);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ tasklet_schedule(&dev->tasklet);
+
+ exit:
+ return err;
+}
+
+static int s5p_aes_crypt(struct ablkcipher_request *req, unsigned long mode)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+ struct s5p_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ struct s5p_aes_reqctx *reqctx = ablkcipher_request_ctx(req);
+ struct s5p_aes_dev *dev = ctx->dev;
+
+ if (!IS_ALIGNED(req->nbytes, AES_BLOCK_SIZE)) {
+ pr_err("request size is not exact amount of AES blocks\n");
+ return -EINVAL;
+ }
+
+ reqctx->mode = mode;
+
+ return s5p_aes_handle_req(dev, req);
+}
+
+static int s5p_aes_setkey(struct crypto_ablkcipher *cipher,
+ const uint8_t *key, unsigned int keylen)
+{
+ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
+ struct s5p_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (keylen != AES_KEYSIZE_128 &&
+ keylen != AES_KEYSIZE_192 &&
+ keylen != AES_KEYSIZE_256)
+ return -EINVAL;
+
+ memcpy(ctx->aes_key, key, keylen);
+ ctx->keylen = keylen;
+
+ return 0;
+}
+
+static int s5p_aes_ecb_encrypt(struct ablkcipher_request *req)
+{
+ return s5p_aes_crypt(req, 0);
+}
+
+static int s5p_aes_ecb_decrypt(struct ablkcipher_request *req)
+{
+ return s5p_aes_crypt(req, FLAGS_AES_DECRYPT);
+}
+
+static int s5p_aes_cbc_encrypt(struct ablkcipher_request *req)
+{
+ return s5p_aes_crypt(req, FLAGS_AES_CBC);
+}
+
+static int s5p_aes_cbc_decrypt(struct ablkcipher_request *req)
+{
+ return s5p_aes_crypt(req, FLAGS_AES_DECRYPT | FLAGS_AES_CBC);
+}
+
+static int s5p_aes_cra_init(struct crypto_tfm *tfm)
+{
+ struct s5p_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ ctx->dev = s5p_dev;
+ tfm->crt_ablkcipher.reqsize = sizeof(struct s5p_aes_reqctx);
+
+ return 0;
+}
+
+static struct crypto_alg algs[] = {
+ {
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "ecb-aes-s5p",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct s5p_aes_ctx),
+ .cra_alignmask = 0x0f,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = s5p_aes_cra_init,
+ .cra_u.ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = s5p_aes_setkey,
+ .encrypt = s5p_aes_ecb_encrypt,
+ .decrypt = s5p_aes_ecb_decrypt,
+ }
+ },
+ {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-s5p",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct s5p_aes_ctx),
+ .cra_alignmask = 0x0f,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = s5p_aes_cra_init,
+ .cra_u.ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = s5p_aes_setkey,
+ .encrypt = s5p_aes_cbc_encrypt,
+ .decrypt = s5p_aes_cbc_decrypt,
+ }
+ },
+};
+
+static int s5p_aes_probe(struct platform_device *pdev)
+{
+ int i, j, err = -ENODEV;
+ struct s5p_aes_dev *pdata;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+
+ if (s5p_dev)
+ return -EEXIST;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (!devm_request_mem_region(dev, res->start,
+ resource_size(res), pdev->name))
+ return -EBUSY;
+
+ pdata->clk = clk_get(dev, "secss");
+ if (IS_ERR(pdata->clk)) {
+ dev_err(dev, "failed to find secss clock source\n");
+ return -ENOENT;
+ }
+
+ clk_enable(pdata->clk);
+
+ spin_lock_init(&pdata->lock);
+ pdata->ioaddr = devm_ioremap(dev, res->start,
+ resource_size(res));
+
+ pdata->irq_hash = platform_get_irq_byname(pdev, "hash");
+ if (pdata->irq_hash < 0) {
+ err = pdata->irq_hash;
+ dev_warn(dev, "hash interrupt is not available.\n");
+ goto err_irq;
+ }
+ err = devm_request_irq(dev, pdata->irq_hash, s5p_aes_interrupt,
+ IRQF_SHARED, pdev->name, pdev);
+ if (err < 0) {
+ dev_warn(dev, "hash interrupt is not available.\n");
+ goto err_irq;
+ }
+
+ pdata->irq_fc = platform_get_irq_byname(pdev, "feed control");
+ if (pdata->irq_fc < 0) {
+ err = pdata->irq_fc;
+ dev_warn(dev, "feed control interrupt is not available.\n");
+ goto err_irq;
+ }
+ err = devm_request_irq(dev, pdata->irq_fc, s5p_aes_interrupt,
+ IRQF_SHARED, pdev->name, pdev);
+ if (err < 0) {
+ dev_warn(dev, "feed control interrupt is not available.\n");
+ goto err_irq;
+ }
+
+ pdata->dev = dev;
+ platform_set_drvdata(pdev, pdata);
+ s5p_dev = pdata;
+
+ tasklet_init(&pdata->tasklet, s5p_tasklet_cb, (unsigned long)pdata);
+ crypto_init_queue(&pdata->queue, CRYPTO_QUEUE_LEN);
+
+ for (i = 0; i < ARRAY_SIZE(algs); i++) {
+ INIT_LIST_HEAD(&algs[i].cra_list);
+ err = crypto_register_alg(&algs[i]);
+ if (err)
+ goto err_algs;
+ }
+
+ pr_info("s5p-sss driver registered\n");
+
+ return 0;
+
+ err_algs:
+ dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name, err);
+
+ for (j = 0; j < i; j++)
+ crypto_unregister_alg(&algs[j]);
+
+ tasklet_kill(&pdata->tasklet);
+
+ err_irq:
+ clk_disable(pdata->clk);
+ clk_put(pdata->clk);
+
+ s5p_dev = NULL;
+ platform_set_drvdata(pdev, NULL);
+
+ return err;
+}
+
+static int s5p_aes_remove(struct platform_device *pdev)
+{
+ struct s5p_aes_dev *pdata = platform_get_drvdata(pdev);
+ int i;
+
+ if (!pdata)
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(algs); i++)
+ crypto_unregister_alg(&algs[i]);
+
+ tasklet_kill(&pdata->tasklet);
+
+ clk_disable(pdata->clk);
+ clk_put(pdata->clk);
+
+ s5p_dev = NULL;
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver s5p_aes_crypto = {
+ .probe = s5p_aes_probe,
+ .remove = s5p_aes_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s5p-secss",
+ },
+};
+
+static int __init s5p_aes_mod_init(void)
+{
+ return platform_driver_register(&s5p_aes_crypto);
+}
+
+static void __exit s5p_aes_mod_exit(void)
+{
+ platform_driver_unregister(&s5p_aes_crypto);
+}
+
+module_init(s5p_aes_mod_init);
+module_exit(s5p_aes_mod_exit);
+
+MODULE_DESCRIPTION("S5PV210 AES hw acceleration support.");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Vladimir Zapolskiy <vzapolskiy@gmail.com>");
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index c1f0045..af8e7b1 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -1019,7 +1019,7 @@
struct ppc4xx_edac_pdata *pdata = NULL;
const struct device_node *np = op->dev.of_node;
- if (op->dev.of_match == NULL)
+ if (of_match_device(ppc4xx_edac_match, &op->dev) == NULL)
return -EINVAL;
/* Initial driver pointers and private data */
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 3c44fbc8..29d2423 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -228,8 +228,8 @@
/* Use an arbitrary short delay to combine multiple reset requests. */
fw_card_get(card);
- if (!schedule_delayed_work(&card->br_work,
- delayed ? DIV_ROUND_UP(HZ, 100) : 0))
+ if (!queue_delayed_work(fw_workqueue, &card->br_work,
+ delayed ? DIV_ROUND_UP(HZ, 100) : 0))
fw_card_put(card);
}
EXPORT_SYMBOL(fw_schedule_bus_reset);
@@ -241,7 +241,7 @@
/* Delay for 2s after last reset per IEEE 1394 clause 8.2.1. */
if (card->reset_jiffies != 0 &&
time_before64(get_jiffies_64(), card->reset_jiffies + 2 * HZ)) {
- if (!schedule_delayed_work(&card->br_work, 2 * HZ))
+ if (!queue_delayed_work(fw_workqueue, &card->br_work, 2 * HZ))
fw_card_put(card);
return;
}
@@ -258,8 +258,7 @@
if (!card->broadcast_channel_allocated) {
fw_iso_resource_manage(card, generation, 1ULL << 31,
- &channel, &bandwidth, true,
- card->bm_transaction_data);
+ &channel, &bandwidth, true);
if (channel != 31) {
fw_notify("failed to allocate broadcast channel\n");
return;
@@ -294,6 +293,7 @@
bool root_device_is_cmc;
bool irm_is_1394_1995_only;
bool keep_this_irm;
+ __be32 transaction_data[2];
spin_lock_irq(&card->lock);
@@ -355,21 +355,21 @@
goto pick_me;
}
- card->bm_transaction_data[0] = cpu_to_be32(0x3f);
- card->bm_transaction_data[1] = cpu_to_be32(local_id);
+ transaction_data[0] = cpu_to_be32(0x3f);
+ transaction_data[1] = cpu_to_be32(local_id);
spin_unlock_irq(&card->lock);
rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
- card->bm_transaction_data, 8);
+ transaction_data, 8);
if (rcode == RCODE_GENERATION)
/* Another bus reset, BM work has been rescheduled. */
goto out;
- bm_id = be32_to_cpu(card->bm_transaction_data[0]);
+ bm_id = be32_to_cpu(transaction_data[0]);
spin_lock_irq(&card->lock);
if (rcode == RCODE_COMPLETE && generation == card->generation)
@@ -490,11 +490,11 @@
/*
* Make sure that the cycle master sends cycle start packets.
*/
- card->bm_transaction_data[0] = cpu_to_be32(CSR_STATE_BIT_CMSTR);
+ transaction_data[0] = cpu_to_be32(CSR_STATE_BIT_CMSTR);
rcode = fw_run_transaction(card, TCODE_WRITE_QUADLET_REQUEST,
root_id, generation, SCODE_100,
CSR_REGISTER_BASE + CSR_STATE_SET,
- card->bm_transaction_data, 4);
+ transaction_data, 4);
if (rcode == RCODE_GENERATION)
goto out;
}
@@ -630,6 +630,10 @@
return -ENODEV;
}
+static void dummy_flush_queue_iso(struct fw_iso_context *ctx)
+{
+}
+
static const struct fw_card_driver dummy_driver_template = {
.read_phy_reg = dummy_read_phy_reg,
.update_phy_reg = dummy_update_phy_reg,
@@ -641,6 +645,7 @@
.start_iso = dummy_start_iso,
.set_iso_channels = dummy_set_iso_channels,
.queue_iso = dummy_queue_iso,
+ .flush_queue_iso = dummy_flush_queue_iso,
};
void fw_card_release(struct kref *kref)
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index 62ac111..b1c1177 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -141,7 +141,6 @@
int generation;
u64 channels;
s32 bandwidth;
- __be32 transaction_data[2];
struct iso_resource_event *e_alloc, *e_dealloc;
};
@@ -150,7 +149,7 @@
static void schedule_iso_resource(struct iso_resource *r, unsigned long delay)
{
client_get(r->client);
- if (!schedule_delayed_work(&r->work, delay))
+ if (!queue_delayed_work(fw_workqueue, &r->work, delay))
client_put(r->client);
}
@@ -1108,6 +1107,7 @@
payload += u.packet.payload_length;
count++;
}
+ fw_iso_context_queue_flush(ctx);
a->size -= uptr_to_u64(p) - a->packets;
a->packets = uptr_to_u64(p);
@@ -1229,8 +1229,7 @@
r->channels, &channel, &bandwidth,
todo == ISO_RES_ALLOC ||
todo == ISO_RES_REALLOC ||
- todo == ISO_RES_ALLOC_ONCE,
- r->transaction_data);
+ todo == ISO_RES_ALLOC_ONCE);
/*
* Is this generation outdated already? As long as this resource sticks
* in the idr, it will be scheduled again for a newer generation or at
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index 9a26243..95a4714 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -725,6 +725,15 @@
return device;
}
+struct workqueue_struct *fw_workqueue;
+EXPORT_SYMBOL(fw_workqueue);
+
+static void fw_schedule_device_work(struct fw_device *device,
+ unsigned long delay)
+{
+ queue_delayed_work(fw_workqueue, &device->work, delay);
+}
+
/*
* These defines control the retry behavior for reading the config
* rom. It shouldn't be necessary to tweak these; if the device
@@ -750,7 +759,7 @@
if (time_before64(get_jiffies_64(),
device->card->reset_jiffies + SHUTDOWN_DELAY)
&& !list_empty(&device->card->link)) {
- schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+ fw_schedule_device_work(device, SHUTDOWN_DELAY);
return;
}
@@ -862,7 +871,7 @@
fw_notify("rediscovered device %s\n", dev_name(dev));
PREPARE_DELAYED_WORK(&old->work, fw_device_update);
- schedule_delayed_work(&old->work, 0);
+ fw_schedule_device_work(old, 0);
if (current_node == card->root_node)
fw_schedule_bm_work(card, 0);
@@ -953,7 +962,7 @@
if (device->config_rom_retries < MAX_RETRIES &&
atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
- schedule_delayed_work(&device->work, RETRY_DELAY);
+ fw_schedule_device_work(device, RETRY_DELAY);
} else {
if (device->node->link_on)
fw_notify("giving up on config rom for node id %x\n",
@@ -1019,7 +1028,7 @@
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
- schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+ fw_schedule_device_work(device, SHUTDOWN_DELAY);
} else {
if (device->config_rom_retries)
fw_notify("created device %s: GUID %08x%08x, S%d00, "
@@ -1098,7 +1107,7 @@
if (device->config_rom_retries < MAX_RETRIES / 2 &&
atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
- schedule_delayed_work(&device->work, RETRY_DELAY / 2);
+ fw_schedule_device_work(device, RETRY_DELAY / 2);
return;
}
@@ -1131,7 +1140,7 @@
if (device->config_rom_retries < MAX_RETRIES &&
atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
- schedule_delayed_work(&device->work, RETRY_DELAY);
+ fw_schedule_device_work(device, RETRY_DELAY);
return;
}
@@ -1158,7 +1167,7 @@
gone:
atomic_set(&device->state, FW_DEVICE_GONE);
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
- schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+ fw_schedule_device_work(device, SHUTDOWN_DELAY);
out:
if (node_id == card->root_node->node_id)
fw_schedule_bm_work(card, 0);
@@ -1214,7 +1223,7 @@
* first config rom scan half a second after bus reset.
*/
INIT_DELAYED_WORK(&device->work, fw_device_init);
- schedule_delayed_work(&device->work, INITIAL_DELAY);
+ fw_schedule_device_work(device, INITIAL_DELAY);
break;
case FW_NODE_INITIATED_RESET:
@@ -1230,7 +1239,7 @@
FW_DEVICE_RUNNING,
FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
- schedule_delayed_work(&device->work,
+ fw_schedule_device_work(device,
device->is_local ? 0 : INITIAL_DELAY);
}
break;
@@ -1245,7 +1254,7 @@
device->generation = card->generation;
if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_update);
- schedule_delayed_work(&device->work, 0);
+ fw_schedule_device_work(device, 0);
}
break;
@@ -1270,7 +1279,7 @@
if (atomic_xchg(&device->state,
FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
- schedule_delayed_work(&device->work,
+ fw_schedule_device_work(device,
list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
}
break;
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 481056d..57c3973 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -185,6 +185,12 @@
}
EXPORT_SYMBOL(fw_iso_context_queue);
+void fw_iso_context_queue_flush(struct fw_iso_context *ctx)
+{
+ ctx->card->driver->flush_queue_iso(ctx);
+}
+EXPORT_SYMBOL(fw_iso_context_queue_flush);
+
int fw_iso_context_stop(struct fw_iso_context *ctx)
{
return ctx->card->driver->stop_iso(ctx);
@@ -196,9 +202,10 @@
*/
static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
- int bandwidth, bool allocate, __be32 data[2])
+ int bandwidth, bool allocate)
{
int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0;
+ __be32 data[2];
/*
* On a 1394a IRM with low contention, try < 1 is enough.
@@ -233,9 +240,10 @@
}
static int manage_channel(struct fw_card *card, int irm_id, int generation,
- u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
+ u32 channels_mask, u64 offset, bool allocate)
{
__be32 bit, all, old;
+ __be32 data[2];
int channel, ret = -EIO, retry = 5;
old = all = allocate ? cpu_to_be32(~0) : 0;
@@ -284,7 +292,7 @@
}
static void deallocate_channel(struct fw_card *card, int irm_id,
- int generation, int channel, __be32 buffer[2])
+ int generation, int channel)
{
u32 mask;
u64 offset;
@@ -293,7 +301,7 @@
offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI :
CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO;
- manage_channel(card, irm_id, generation, mask, offset, false, buffer);
+ manage_channel(card, irm_id, generation, mask, offset, false);
}
/**
@@ -322,7 +330,7 @@
*/
void fw_iso_resource_manage(struct fw_card *card, int generation,
u64 channels_mask, int *channel, int *bandwidth,
- bool allocate, __be32 buffer[2])
+ bool allocate)
{
u32 channels_hi = channels_mask; /* channels 31...0 */
u32 channels_lo = channels_mask >> 32; /* channels 63...32 */
@@ -335,11 +343,11 @@
if (channels_hi)
c = manage_channel(card, irm_id, generation, channels_hi,
CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI,
- allocate, buffer);
+ allocate);
if (channels_lo && c < 0) {
c = manage_channel(card, irm_id, generation, channels_lo,
CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO,
- allocate, buffer);
+ allocate);
if (c >= 0)
c += 32;
}
@@ -351,14 +359,13 @@
if (*bandwidth == 0)
return;
- ret = manage_bandwidth(card, irm_id, generation, *bandwidth,
- allocate, buffer);
+ ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate);
if (ret < 0)
*bandwidth = 0;
if (allocate && ret < 0) {
if (c >= 0)
- deallocate_channel(card, irm_id, generation, c, buffer);
+ deallocate_channel(card, irm_id, generation, c);
*channel = ret;
}
}
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index d00f8ce..334b82a 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -36,6 +36,7 @@
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/types.h>
+#include <linux/workqueue.h>
#include <asm/byteorder.h>
@@ -326,8 +327,8 @@
* It will contain tag, channel, and sy data instead of a node ID then.
*
* The payload buffer at @data is going to be DMA-mapped except in case of
- * quadlet-sized payload or of local (loopback) requests. Hence make sure that
- * the buffer complies with the restrictions for DMA-mapped memory. The
+ * @length <= 8 or of local (loopback) requests. Hence make sure that the
+ * buffer complies with the restrictions of the streaming DMA mapping API.
* @payload must not be freed before the @callback is called.
*
* In case of request types without payload, @data is NULL and @length is 0.
@@ -411,7 +412,8 @@
*
* Returns the RCODE. See fw_send_request() for parameter documentation.
* Unlike fw_send_request(), @data points to the payload of the request or/and
- * to the payload of the response.
+ * to the payload of the response. DMA mapping restrictions apply to outbound
+ * request payloads of >= 8 bytes but not to inbound response payloads.
*/
int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
int generation, int speed, unsigned long long offset,
@@ -1212,13 +1214,21 @@
{
int ret;
+ fw_workqueue = alloc_workqueue("firewire",
+ WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0);
+ if (!fw_workqueue)
+ return -ENOMEM;
+
ret = bus_register(&fw_bus_type);
- if (ret < 0)
+ if (ret < 0) {
+ destroy_workqueue(fw_workqueue);
return ret;
+ }
fw_cdev_major = register_chrdev(0, "firewire", &fw_device_ops);
if (fw_cdev_major < 0) {
bus_unregister(&fw_bus_type);
+ destroy_workqueue(fw_workqueue);
return fw_cdev_major;
}
@@ -1234,6 +1244,7 @@
{
unregister_chrdev(fw_cdev_major, "firewire");
bus_unregister(&fw_bus_type);
+ destroy_workqueue(fw_workqueue);
idr_destroy(&fw_device_idr);
}
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index 25e729c..0fe4e4e 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -97,6 +97,8 @@
struct fw_iso_buffer *buffer,
unsigned long payload);
+ void (*flush_queue_iso)(struct fw_iso_context *ctx);
+
int (*stop_iso)(struct fw_iso_context *ctx);
};
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 3f04dd3..b9762d0 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -881,7 +881,9 @@
spin_unlock_irqrestore(&dev->lock, flags);
- if (retval < 0)
+ if (retval >= 0)
+ fw_iso_context_queue_flush(dev->broadcast_rcv_context);
+ else
fw_error("requeue failed\n");
}
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index f903d7b6..438e6c8 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1006,13 +1006,12 @@
static struct descriptor *find_branch_descriptor(struct descriptor *d, int z)
{
- int b, key;
+ __le16 branch;
- b = (le16_to_cpu(d->control) & DESCRIPTOR_BRANCH_ALWAYS) >> 2;
- key = (le16_to_cpu(d->control) & DESCRIPTOR_KEY_IMMEDIATE) >> 8;
+ branch = d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS);
/* figure out which descriptor the branch address goes in */
- if (z == 2 && (b == 3 || key == 2))
+ if (z == 2 && branch == cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
return d;
else
return d + z - 1;
@@ -1193,9 +1192,6 @@
wmb(); /* finish init of new descriptors before branch_address update */
ctx->prev->branch_address = cpu_to_le32(d_bus | z);
ctx->prev = find_branch_descriptor(d, z);
-
- reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
- flush_writes(ctx->ohci);
}
static void context_stop(struct context *ctx)
@@ -1218,6 +1214,7 @@
}
struct driver_data {
+ u8 inline_data[8];
struct fw_packet *packet;
};
@@ -1301,20 +1298,28 @@
return -1;
}
+ BUILD_BUG_ON(sizeof(struct driver_data) > sizeof(struct descriptor));
driver_data = (struct driver_data *) &d[3];
driver_data->packet = packet;
packet->driver_data = driver_data;
if (packet->payload_length > 0) {
- payload_bus =
- dma_map_single(ohci->card.device, packet->payload,
- packet->payload_length, DMA_TO_DEVICE);
- if (dma_mapping_error(ohci->card.device, payload_bus)) {
- packet->ack = RCODE_SEND_ERROR;
- return -1;
+ if (packet->payload_length > sizeof(driver_data->inline_data)) {
+ payload_bus = dma_map_single(ohci->card.device,
+ packet->payload,
+ packet->payload_length,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(ohci->card.device, payload_bus)) {
+ packet->ack = RCODE_SEND_ERROR;
+ return -1;
+ }
+ packet->payload_bus = payload_bus;
+ packet->payload_mapped = true;
+ } else {
+ memcpy(driver_data->inline_data, packet->payload,
+ packet->payload_length);
+ payload_bus = d_bus + 3 * sizeof(*d);
}
- packet->payload_bus = payload_bus;
- packet->payload_mapped = true;
d[2].req_count = cpu_to_le16(packet->payload_length);
d[2].data_address = cpu_to_le32(payload_bus);
@@ -1340,8 +1345,12 @@
context_append(ctx, d, z, 4 - z);
- if (!ctx->running)
+ if (ctx->running) {
+ reg_write(ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
+ flush_writes(ohci);
+ } else {
context_run(ctx, 0);
+ }
return 0;
}
@@ -2066,8 +2075,6 @@
reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
reg_write(ohci, OHCI1394_LinkControlSet,
- OHCI1394_LinkControl_rcvSelfID |
- OHCI1394_LinkControl_rcvPhyPkt |
OHCI1394_LinkControl_cycleTimerEnable |
OHCI1394_LinkControl_cycleMaster);
@@ -2094,9 +2101,6 @@
reg_write(ohci, OHCI1394_FairnessControl, 0);
card->priority_budget_implemented = ohci->pri_req_max != 0;
- ar_context_run(&ohci->ar_request_ctx);
- ar_context_run(&ohci->ar_response_ctx);
-
reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
reg_write(ohci, OHCI1394_IntEventClear, ~0);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
@@ -2186,7 +2190,13 @@
reg_write(ohci, OHCI1394_HCControlSet,
OHCI1394_HCControl_linkEnable |
OHCI1394_HCControl_BIBimageValid);
- flush_writes(ohci);
+
+ reg_write(ohci, OHCI1394_LinkControlSet,
+ OHCI1394_LinkControl_rcvSelfID |
+ OHCI1394_LinkControl_rcvPhyPkt);
+
+ ar_context_run(&ohci->ar_request_ctx);
+ ar_context_run(&ohci->ar_response_ctx); /* also flushes writes */
/* We are ready to go, reset bus to finish initialization. */
fw_schedule_bus_reset(&ohci->card, false, true);
@@ -2199,7 +2209,6 @@
{
struct fw_ohci *ohci;
unsigned long flags;
- int ret = -EBUSY;
__be32 *next_config_rom;
dma_addr_t uninitialized_var(next_config_rom_bus);
@@ -2240,22 +2249,37 @@
spin_lock_irqsave(&ohci->lock, flags);
+ /*
+ * If there is not an already pending config_rom update,
+ * push our new allocation into the ohci->next_config_rom
+ * and then mark the local variable as null so that we
+ * won't deallocate the new buffer.
+ *
+ * OTOH, if there is a pending config_rom update, just
+ * use that buffer with the new config_rom data, and
+ * let this routine free the unused DMA allocation.
+ */
+
if (ohci->next_config_rom == NULL) {
ohci->next_config_rom = next_config_rom;
ohci->next_config_rom_bus = next_config_rom_bus;
-
- copy_config_rom(ohci->next_config_rom, config_rom, length);
-
- ohci->next_header = config_rom[0];
- ohci->next_config_rom[0] = 0;
-
- reg_write(ohci, OHCI1394_ConfigROMmap,
- ohci->next_config_rom_bus);
- ret = 0;
+ next_config_rom = NULL;
}
+ copy_config_rom(ohci->next_config_rom, config_rom, length);
+
+ ohci->next_header = config_rom[0];
+ ohci->next_config_rom[0] = 0;
+
+ reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
+
spin_unlock_irqrestore(&ohci->lock, flags);
+ /* If we didn't use the DMA allocation, delete it. */
+ if (next_config_rom != NULL)
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ next_config_rom, next_config_rom_bus);
+
/*
* Now initiate a bus reset to have the changes take
* effect. We clean up the old config rom memory and DMA
@@ -2263,13 +2287,10 @@
* controller could need to access it before the bus reset
* takes effect.
*/
- if (ret == 0)
- fw_schedule_bus_reset(&ohci->card, true, true);
- else
- dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
- next_config_rom, next_config_rom_bus);
- return ret;
+ fw_schedule_bus_reset(&ohci->card, true, true);
+
+ return 0;
}
static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)
@@ -3101,6 +3122,15 @@
return ret;
}
+static void ohci_flush_queue_iso(struct fw_iso_context *base)
+{
+ struct context *ctx =
+ &container_of(base, struct iso_context, base)->context;
+
+ reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
+ flush_writes(ctx->ohci);
+}
+
static const struct fw_card_driver ohci_driver = {
.enable = ohci_enable,
.read_phy_reg = ohci_read_phy_reg,
@@ -3117,6 +3147,7 @@
.free_iso_context = ohci_free_iso_context,
.set_iso_channels = ohci_set_iso_channels,
.queue_iso = ohci_queue_iso,
+ .flush_queue_iso = ohci_flush_queue_iso,
.start_iso = ohci_start_iso,
.stop_iso = ohci_stop_iso,
};
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 77ed589..41841a3 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -125,9 +125,6 @@
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
-/* I don't know why the SCSI stack doesn't define something like this... */
-typedef void (*scsi_done_fn_t)(struct scsi_cmnd *);
-
static const char sbp2_driver_name[] = "sbp2";
/*
@@ -261,7 +258,6 @@
struct kref kref;
dma_addr_t request_bus;
int rcode;
- struct sbp2_pointer pointer;
void (*callback)(struct sbp2_orb * orb, struct sbp2_status * status);
struct list_head link;
};
@@ -314,7 +310,6 @@
u8 command_block[SBP2_MAX_CDB_SIZE];
} request;
struct scsi_cmnd *cmd;
- scsi_done_fn_t done;
struct sbp2_logical_unit *lu;
struct sbp2_pointer page_table[SG_ALL] __attribute__((aligned(8)));
@@ -494,10 +489,11 @@
int node_id, int generation, u64 offset)
{
struct fw_device *device = target_device(lu->tgt);
+ struct sbp2_pointer orb_pointer;
unsigned long flags;
- orb->pointer.high = 0;
- orb->pointer.low = cpu_to_be32(orb->request_bus);
+ orb_pointer.high = 0;
+ orb_pointer.low = cpu_to_be32(orb->request_bus);
spin_lock_irqsave(&device->card->lock, flags);
list_add_tail(&orb->link, &lu->orb_list);
@@ -508,7 +504,7 @@
fw_send_request(device->card, &orb->t, TCODE_WRITE_BLOCK_REQUEST,
node_id, generation, device->max_speed, offset,
- &orb->pointer, 8, complete_transaction, orb);
+ &orb_pointer, 8, complete_transaction, orb);
}
static int sbp2_cancel_orbs(struct sbp2_logical_unit *lu)
@@ -830,8 +826,6 @@
kref_put(&tgt->kref, sbp2_release_target);
}
-static struct workqueue_struct *sbp2_wq;
-
/*
* Always get the target's kref when scheduling work on one its units.
* Each workqueue job is responsible to call sbp2_target_put() upon return.
@@ -839,7 +833,7 @@
static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
{
sbp2_target_get(lu->tgt);
- if (!queue_delayed_work(sbp2_wq, &lu->work, delay))
+ if (!queue_delayed_work(fw_workqueue, &lu->work, delay))
sbp2_target_put(lu->tgt);
}
@@ -1398,7 +1392,7 @@
sbp2_unmap_scatterlist(device->card->device, orb);
orb->cmd->result = result;
- orb->done(orb->cmd);
+ orb->cmd->scsi_done(orb->cmd);
}
static int sbp2_map_scatterlist(struct sbp2_command_orb *orb,
@@ -1463,7 +1457,8 @@
/* SCSI stack integration */
-static int sbp2_scsi_queuecommand_lck(struct scsi_cmnd *cmd, scsi_done_fn_t done)
+static int sbp2_scsi_queuecommand(struct Scsi_Host *shost,
+ struct scsi_cmnd *cmd)
{
struct sbp2_logical_unit *lu = cmd->device->hostdata;
struct fw_device *device = target_device(lu->tgt);
@@ -1477,7 +1472,7 @@
if (cmd->sc_data_direction == DMA_BIDIRECTIONAL) {
fw_error("Can't handle DMA_BIDIRECTIONAL, rejecting command\n");
cmd->result = DID_ERROR << 16;
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
@@ -1490,11 +1485,8 @@
/* Initialize rcode to something not RCODE_COMPLETE. */
orb->base.rcode = -1;
kref_init(&orb->base.kref);
-
- orb->lu = lu;
- orb->done = done;
- orb->cmd = cmd;
-
+ orb->lu = lu;
+ orb->cmd = cmd;
orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
orb->request.misc = cpu_to_be32(
COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
@@ -1529,8 +1521,6 @@
return retval;
}
-static DEF_SCSI_QCMD(sbp2_scsi_queuecommand)
-
static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
{
struct sbp2_logical_unit *lu = sdev->hostdata;
@@ -1653,17 +1643,12 @@
static int __init sbp2_init(void)
{
- sbp2_wq = create_singlethread_workqueue(KBUILD_MODNAME);
- if (!sbp2_wq)
- return -ENOMEM;
-
return driver_register(&sbp2_driver.driver);
}
static void __exit sbp2_cleanup(void)
{
driver_unregister(&sbp2_driver.driver);
- destroy_workqueue(sbp2_wq);
}
module_init(sbp2_init);
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b3a25a5..efba163 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -157,4 +157,6 @@
If unsure, say N here. Drivers that need these helpers will select
this option automatically.
+source "drivers/firmware/google/Kconfig"
+
endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 00bb0b8..47338c9 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,3 +13,5 @@
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_SIGMA) += sigma.o
+
+obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 96c25d9..f1b7f65 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -531,8 +531,8 @@
edd_has_edd30(struct edd_device *edev)
{
struct edd_info *info;
- int i, nonzero_path = 0;
- char c;
+ int i;
+ u8 csum = 0;
if (!edev)
return 0;
@@ -544,16 +544,16 @@
return 0;
}
- for (i = 30; i <= 73; i++) {
- c = *(((uint8_t *) info) + i + 4);
- if (c) {
- nonzero_path++;
- break;
- }
- }
- if (!nonzero_path) {
+
+ /* We support only T13 spec */
+ if (info->params.device_path_info_length != 44)
return 0;
- }
+
+ for (i = 30; i < info->params.device_path_info_length + 30; i++)
+ csum += *(((u8 *)&info->params) + i);
+
+ if (csum)
+ return 0;
return 1;
}
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index ff0c373..a2d2f1f 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -677,8 +677,8 @@
return 0;
out_free:
- kfree(efivars->new_var);
- efivars->new_var = NULL;
+ kfree(efivars->del_var);
+ efivars->del_var = NULL;
kfree(efivars->new_var);
efivars->new_var = NULL;
return error;
@@ -803,6 +803,8 @@
ops.set_variable = efi.set_variable;
ops.get_next_variable = efi.get_next_variable;
error = register_efivars(&__efivars, &ops, efi_kobj);
+ if (error)
+ goto err_put;
/* Don't forget the systab entry */
error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
@@ -810,18 +812,25 @@
printk(KERN_ERR
"efivars: Sysfs attribute export failed with error %d.\n",
error);
- unregister_efivars(&__efivars);
- kobject_put(efi_kobj);
+ goto err_unregister;
}
+ return 0;
+
+err_unregister:
+ unregister_efivars(&__efivars);
+err_put:
+ kobject_put(efi_kobj);
return error;
}
static void __exit
efivars_exit(void)
{
- unregister_efivars(&__efivars);
- kobject_put(efi_kobj);
+ if (efi_enabled) {
+ unregister_efivars(&__efivars);
+ kobject_put(efi_kobj);
+ }
}
module_init(efivars_init);
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
new file mode 100644
index 0000000..87096b6
--- /dev/null
+++ b/drivers/firmware/google/Kconfig
@@ -0,0 +1,31 @@
+config GOOGLE_FIRMWARE
+ bool "Google Firmware Drivers"
+ depends on X86
+ default n
+ help
+ These firmware drivers are used by Google's servers. They are
+ only useful if you are working directly on one of their
+ proprietary servers. If in doubt, say "N".
+
+menu "Google Firmware Drivers"
+ depends on GOOGLE_FIRMWARE
+
+config GOOGLE_SMI
+ tristate "SMI interface for Google platforms"
+ depends on ACPI && DMI
+ select EFI_VARS
+ help
+ Say Y here if you want to enable SMI callbacks for Google
+ platforms. This provides an interface for writing to and
+ clearing the EFI event log and reading and writing NVRAM
+ variables.
+
+config GOOGLE_MEMCONSOLE
+ tristate "Firmware Memory Console"
+ depends on DMI
+ help
+ This option enables the kernel to search for a firmware log in
+ the EBDA on Google servers. If found, this log is exported to
+ userland in the file /sys/firmware/log.
+
+endmenu
diff --git a/drivers/firmware/google/Makefile b/drivers/firmware/google/Makefile
new file mode 100644
index 0000000..54a294e
--- /dev/null
+++ b/drivers/firmware/google/Makefile
@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_GOOGLE_SMI) += gsmi.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE) += memconsole.o
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
new file mode 100644
index 0000000..fa7f0b3
--- /dev/null
+++ b/drivers/firmware/google/gsmi.c
@@ -0,0 +1,940 @@
+/*
+ * Copyright 2010 Google Inc. All Rights Reserved.
+ * Author: dlaurie@google.com (Duncan Laurie)
+ *
+ * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
+ *
+ * EFI SMI interface for Google platforms
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/kdebug.h>
+#include <linux/reboot.h>
+#include <linux/efi.h>
+
+#define GSMI_SHUTDOWN_CLEAN 0 /* Clean Shutdown */
+/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
+#define GSMI_SHUTDOWN_NMIWDT 1 /* NMI Watchdog */
+#define GSMI_SHUTDOWN_PANIC 2 /* Panic */
+#define GSMI_SHUTDOWN_OOPS 3 /* Oops */
+#define GSMI_SHUTDOWN_DIE 4 /* Die -- No longer meaningful */
+#define GSMI_SHUTDOWN_MCE 5 /* Machine Check */
+#define GSMI_SHUTDOWN_SOFTWDT 6 /* Software Watchdog */
+#define GSMI_SHUTDOWN_MBE 7 /* Uncorrected ECC */
+#define GSMI_SHUTDOWN_TRIPLE 8 /* Triple Fault */
+
+#define DRIVER_VERSION "1.0"
+#define GSMI_GUID_SIZE 16
+#define GSMI_BUF_SIZE 1024
+#define GSMI_BUF_ALIGN sizeof(u64)
+#define GSMI_CALLBACK 0xef
+
+/* SMI return codes */
+#define GSMI_SUCCESS 0x00
+#define GSMI_UNSUPPORTED2 0x03
+#define GSMI_LOG_FULL 0x0b
+#define GSMI_VAR_NOT_FOUND 0x0e
+#define GSMI_HANDSHAKE_SPIN 0x7d
+#define GSMI_HANDSHAKE_CF 0x7e
+#define GSMI_HANDSHAKE_NONE 0x7f
+#define GSMI_INVALID_PARAMETER 0x82
+#define GSMI_UNSUPPORTED 0x83
+#define GSMI_BUFFER_TOO_SMALL 0x85
+#define GSMI_NOT_READY 0x86
+#define GSMI_DEVICE_ERROR 0x87
+#define GSMI_NOT_FOUND 0x8e
+
+#define QUIRKY_BOARD_HASH 0x78a30a50
+
+/* Internally used commands passed to the firmware */
+#define GSMI_CMD_GET_NVRAM_VAR 0x01
+#define GSMI_CMD_GET_NEXT_VAR 0x02
+#define GSMI_CMD_SET_NVRAM_VAR 0x03
+#define GSMI_CMD_SET_EVENT_LOG 0x08
+#define GSMI_CMD_CLEAR_EVENT_LOG 0x09
+#define GSMI_CMD_CLEAR_CONFIG 0x20
+#define GSMI_CMD_HANDSHAKE_TYPE 0xC1
+
+/* Magic entry type for kernel events */
+#define GSMI_LOG_ENTRY_TYPE_KERNEL 0xDEAD
+
+/* SMI buffers must be in 32bit physical address space */
+struct gsmi_buf {
+ u8 *start; /* start of buffer */
+ size_t length; /* length of buffer */
+ dma_addr_t handle; /* dma allocation handle */
+ u32 address; /* physical address of buffer */
+};
+
+struct gsmi_device {
+ struct platform_device *pdev; /* platform device */
+ struct gsmi_buf *name_buf; /* variable name buffer */
+ struct gsmi_buf *data_buf; /* generic data buffer */
+ struct gsmi_buf *param_buf; /* parameter buffer */
+ spinlock_t lock; /* serialize access to SMIs */
+ u16 smi_cmd; /* SMI command port */
+ int handshake_type; /* firmware handler interlock type */
+ struct dma_pool *dma_pool; /* DMA buffer pool */
+} gsmi_dev;
+
+/* Packed structures for communicating with the firmware */
+struct gsmi_nvram_var_param {
+ efi_guid_t guid;
+ u32 name_ptr;
+ u32 attributes;
+ u32 data_len;
+ u32 data_ptr;
+} __packed;
+
+struct gsmi_get_next_var_param {
+ u8 guid[GSMI_GUID_SIZE];
+ u32 name_ptr;
+ u32 name_len;
+} __packed;
+
+struct gsmi_set_eventlog_param {
+ u32 data_ptr;
+ u32 data_len;
+ u32 type;
+} __packed;
+
+/* Event log formats */
+struct gsmi_log_entry_type_1 {
+ u16 type;
+ u32 instance;
+} __packed;
+
+
+/*
+ * Some platforms don't have explicit SMI handshake
+ * and need to wait for SMI to complete.
+ */
+#define GSMI_DEFAULT_SPINCOUNT 0x10000
+static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
+module_param(spincount, uint, 0600);
+MODULE_PARM_DESC(spincount,
+ "The number of loop iterations to use when using the spin handshake.");
+
+static struct gsmi_buf *gsmi_buf_alloc(void)
+{
+ struct gsmi_buf *smibuf;
+
+ smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
+ if (!smibuf) {
+ printk(KERN_ERR "gsmi: out of memory\n");
+ return NULL;
+ }
+
+ /* allocate buffer in 32bit address space */
+ smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
+ &smibuf->handle);
+ if (!smibuf->start) {
+ printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+ kfree(smibuf);
+ return NULL;
+ }
+
+ /* fill in the buffer handle */
+ smibuf->length = GSMI_BUF_SIZE;
+ smibuf->address = (u32)virt_to_phys(smibuf->start);
+
+ return smibuf;
+}
+
+static void gsmi_buf_free(struct gsmi_buf *smibuf)
+{
+ if (smibuf) {
+ if (smibuf->start)
+ dma_pool_free(gsmi_dev.dma_pool, smibuf->start,
+ smibuf->handle);
+ kfree(smibuf);
+ }
+}
+
+/*
+ * Make a call to gsmi func(sub). GSMI error codes are translated to
+ * in-kernel errnos (0 on success, -ERRNO on error).
+ */
+static int gsmi_exec(u8 func, u8 sub)
+{
+ u16 cmd = (sub << 8) | func;
+ u16 result = 0;
+ int rc = 0;
+
+ /*
+ * AH : Subfunction number
+ * AL : Function number
+ * EBX : Parameter block address
+ * DX : SMI command port
+ *
+ * Three protocols here. See also the comment in gsmi_init().
+ */
+ if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
+ /*
+ * If handshake_type == HANDSHAKE_CF then set CF on the
+ * way in and wait for the handler to clear it; this avoids
+ * corrupting register state on those chipsets which have
+ * a delay between writing the SMI trigger register and
+ * entering SMM.
+ */
+ asm volatile (
+ "stc\n"
+ "outb %%al, %%dx\n"
+ "1: jc 1b\n"
+ : "=a" (result)
+ : "0" (cmd),
+ "d" (gsmi_dev.smi_cmd),
+ "b" (gsmi_dev.param_buf->address)
+ : "memory", "cc"
+ );
+ } else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
+ /*
+ * If handshake_type == HANDSHAKE_SPIN we spin a
+ * hundred-ish usecs to ensure the SMI has triggered.
+ */
+ asm volatile (
+ "outb %%al, %%dx\n"
+ "1: loop 1b\n"
+ : "=a" (result)
+ : "0" (cmd),
+ "d" (gsmi_dev.smi_cmd),
+ "b" (gsmi_dev.param_buf->address),
+ "c" (spincount)
+ : "memory", "cc"
+ );
+ } else {
+ /*
+ * If handshake_type == HANDSHAKE_NONE we do nothing;
+ * either we don't need to or it's legacy firmware that
+ * doesn't understand the CF protocol.
+ */
+ asm volatile (
+ "outb %%al, %%dx\n\t"
+ : "=a" (result)
+ : "0" (cmd),
+ "d" (gsmi_dev.smi_cmd),
+ "b" (gsmi_dev.param_buf->address)
+ : "memory", "cc"
+ );
+ }
+
+ /* check return code from SMI handler */
+ switch (result) {
+ case GSMI_SUCCESS:
+ break;
+ case GSMI_VAR_NOT_FOUND:
+ /* not really an error, but let the caller know */
+ rc = 1;
+ break;
+ case GSMI_INVALID_PARAMETER:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+ rc = -EINVAL;
+ break;
+ case GSMI_BUFFER_TOO_SMALL:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+ rc = -ENOMEM;
+ break;
+ case GSMI_UNSUPPORTED:
+ case GSMI_UNSUPPORTED2:
+ if (sub != GSMI_CMD_HANDSHAKE_TYPE)
+ printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
+ cmd);
+ rc = -ENOSYS;
+ break;
+ case GSMI_NOT_READY:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+ rc = -EBUSY;
+ break;
+ case GSMI_DEVICE_ERROR:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+ rc = -EFAULT;
+ break;
+ case GSMI_NOT_FOUND:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+ rc = -ENOENT;
+ break;
+ case GSMI_LOG_FULL:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+ rc = -ENOSPC;
+ break;
+ case GSMI_HANDSHAKE_CF:
+ case GSMI_HANDSHAKE_SPIN:
+ case GSMI_HANDSHAKE_NONE:
+ rc = result;
+ break;
+ default:
+ printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
+ cmd, result);
+ rc = -ENXIO;
+ }
+
+ return rc;
+}
+
+/* Return the number of unicode characters in data */
+static size_t
+utf16_strlen(efi_char16_t *data, unsigned long maxlength)
+{
+ unsigned long length = 0;
+
+ while (*data++ != 0 && length < maxlength)
+ length++;
+ return length;
+}
+
+static efi_status_t gsmi_get_variable(efi_char16_t *name,
+ efi_guid_t *vendor, u32 *attr,
+ unsigned long *data_size,
+ void *data)
+{
+ struct gsmi_nvram_var_param param = {
+ .name_ptr = gsmi_dev.name_buf->address,
+ .data_ptr = gsmi_dev.data_buf->address,
+ .data_len = (u32)*data_size,
+ };
+ efi_status_t ret = EFI_SUCCESS;
+ unsigned long flags;
+ size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+ int rc;
+
+ if (name_len >= GSMI_BUF_SIZE / 2)
+ return EFI_BAD_BUFFER_SIZE;
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ /* Vendor guid */
+ memcpy(¶m.guid, vendor, sizeof(param.guid));
+
+ /* variable name, already in UTF-16 */
+ memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+ memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+ /* data pointer */
+ memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+
+ /* parameter buffer */
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+ memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
+ if (rc < 0) {
+ printk(KERN_ERR "gsmi: Get Variable failed\n");
+ ret = EFI_LOAD_ERROR;
+ } else if (rc == 1) {
+ /* variable was not found */
+ ret = EFI_NOT_FOUND;
+ } else {
+ /* Get the arguments back */
+ memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param));
+
+ /* The size reported is the min of all of our buffers */
+ *data_size = min(*data_size, gsmi_dev.data_buf->length);
+ *data_size = min_t(unsigned long, *data_size, param.data_len);
+
+ /* Copy data back to return buffer. */
+ memcpy(data, gsmi_dev.data_buf->start, *data_size);
+
+ /* All variables are have the following attributes */
+ *attr = EFI_VARIABLE_NON_VOLATILE |
+ EFI_VARIABLE_BOOTSERVICE_ACCESS |
+ EFI_VARIABLE_RUNTIME_ACCESS;
+ }
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ return ret;
+}
+
+static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
+ efi_char16_t *name,
+ efi_guid_t *vendor)
+{
+ struct gsmi_get_next_var_param param = {
+ .name_ptr = gsmi_dev.name_buf->address,
+ .name_len = gsmi_dev.name_buf->length,
+ };
+ efi_status_t ret = EFI_SUCCESS;
+ int rc;
+ unsigned long flags;
+
+ /* For the moment, only support buffers that exactly match in size */
+ if (*name_size != GSMI_BUF_SIZE)
+ return EFI_BAD_BUFFER_SIZE;
+
+ /* Let's make sure the thing is at least null-terminated */
+ if (utf16_strlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
+ return EFI_INVALID_PARAMETER;
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ /* guid */
+ memcpy(¶m.guid, vendor, sizeof(param.guid));
+
+ /* variable name, already in UTF-16 */
+ memcpy(gsmi_dev.name_buf->start, name, *name_size);
+
+ /* parameter buffer */
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+ memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
+ if (rc < 0) {
+ printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+ ret = EFI_LOAD_ERROR;
+ } else if (rc == 1) {
+ /* variable not found -- end of list */
+ ret = EFI_NOT_FOUND;
+ } else {
+ /* copy variable data back to return buffer */
+ memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param));
+
+ /* Copy the name back */
+ memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
+ *name_size = utf16_strlen(name, GSMI_BUF_SIZE / 2) * 2;
+
+ /* copy guid to return buffer */
+ memcpy(vendor, ¶m.guid, sizeof(param.guid));
+ ret = EFI_SUCCESS;
+ }
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ return ret;
+}
+
+static efi_status_t gsmi_set_variable(efi_char16_t *name,
+ efi_guid_t *vendor,
+ unsigned long attr,
+ unsigned long data_size,
+ void *data)
+{
+ struct gsmi_nvram_var_param param = {
+ .name_ptr = gsmi_dev.name_buf->address,
+ .data_ptr = gsmi_dev.data_buf->address,
+ .data_len = (u32)data_size,
+ .attributes = EFI_VARIABLE_NON_VOLATILE |
+ EFI_VARIABLE_BOOTSERVICE_ACCESS |
+ EFI_VARIABLE_RUNTIME_ACCESS,
+ };
+ size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+ efi_status_t ret = EFI_SUCCESS;
+ int rc;
+ unsigned long flags;
+
+ if (name_len >= GSMI_BUF_SIZE / 2)
+ return EFI_BAD_BUFFER_SIZE;
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ /* guid */
+ memcpy(¶m.guid, vendor, sizeof(param.guid));
+
+ /* variable name, already in UTF-16 */
+ memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+ memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+ /* data pointer */
+ memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+ memcpy(gsmi_dev.data_buf->start, data, data_size);
+
+ /* parameter buffer */
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+ memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
+ if (rc < 0) {
+ printk(KERN_ERR "gsmi: Set Variable failed\n");
+ ret = EFI_INVALID_PARAMETER;
+ }
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ return ret;
+}
+
+static const struct efivar_operations efivar_ops = {
+ .get_variable = gsmi_get_variable,
+ .set_variable = gsmi_set_variable,
+ .get_next_variable = gsmi_get_next_variable,
+};
+
+static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t count)
+{
+ struct gsmi_set_eventlog_param param = {
+ .data_ptr = gsmi_dev.data_buf->address,
+ };
+ int rc = 0;
+ unsigned long flags;
+
+ /* Pull the type out */
+ if (count < sizeof(u32))
+ return -EINVAL;
+ param.type = *(u32 *)buf;
+ count -= sizeof(u32);
+ buf += sizeof(u32);
+
+ /* The remaining buffer is the data payload */
+ if (count > gsmi_dev.data_buf->length)
+ return -EINVAL;
+ param.data_len = count - sizeof(u32);
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ /* data pointer */
+ memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+ memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
+
+ /* parameter buffer */
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+ memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+ if (rc < 0)
+ printk(KERN_ERR "gsmi: Set Event Log failed\n");
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ return rc;
+
+}
+
+static struct bin_attribute eventlog_bin_attr = {
+ .attr = {.name = "append_to_eventlog", .mode = 0200},
+ .write = eventlog_write,
+};
+
+static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc;
+ unsigned long flags;
+ unsigned long val;
+ struct {
+ u32 percentage;
+ u32 data_type;
+ } param;
+
+ rc = strict_strtoul(buf, 0, &val);
+ if (rc)
+ return rc;
+
+ /*
+ * Value entered is a percentage, 0 through 100, anything else
+ * is invalid.
+ */
+ if (val > 100)
+ return -EINVAL;
+
+ /* data_type here selects the smbios event log. */
+ param.percentage = val;
+ param.data_type = 0;
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ /* parameter buffer */
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+ memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ if (rc)
+ return rc;
+ return count;
+}
+
+static struct kobj_attribute gsmi_clear_eventlog_attr = {
+ .attr = {.name = "clear_eventlog", .mode = 0200},
+ .store = gsmi_clear_eventlog_store,
+};
+
+static ssize_t gsmi_clear_config_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ /* clear parameter buffer */
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ if (rc)
+ return rc;
+ return count;
+}
+
+static struct kobj_attribute gsmi_clear_config_attr = {
+ .attr = {.name = "clear_config", .mode = 0200},
+ .store = gsmi_clear_config_store,
+};
+
+static const struct attribute *gsmi_attrs[] = {
+ &gsmi_clear_config_attr.attr,
+ &gsmi_clear_eventlog_attr.attr,
+ NULL,
+};
+
+static int gsmi_shutdown_reason(int reason)
+{
+ struct gsmi_log_entry_type_1 entry = {
+ .type = GSMI_LOG_ENTRY_TYPE_KERNEL,
+ .instance = reason,
+ };
+ struct gsmi_set_eventlog_param param = {
+ .data_len = sizeof(entry),
+ .type = 1,
+ };
+ static int saved_reason;
+ int rc = 0;
+ unsigned long flags;
+
+ /* avoid duplicate entries in the log */
+ if (saved_reason & (1 << reason))
+ return 0;
+
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+ saved_reason |= (1 << reason);
+
+ /* data pointer */
+ memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+ memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
+
+ /* parameter buffer */
+ param.data_ptr = gsmi_dev.data_buf->address;
+ memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+ memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
+
+ rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ if (rc < 0)
+ printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+ else
+ printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
+ reason);
+
+ return rc;
+}
+
+static int gsmi_reboot_callback(struct notifier_block *nb,
+ unsigned long reason, void *arg)
+{
+ gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_reboot_notifier = {
+ .notifier_call = gsmi_reboot_callback
+};
+
+static int gsmi_die_callback(struct notifier_block *nb,
+ unsigned long reason, void *arg)
+{
+ if (reason == DIE_OOPS)
+ gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_die_notifier = {
+ .notifier_call = gsmi_die_callback
+};
+
+static int gsmi_panic_callback(struct notifier_block *nb,
+ unsigned long reason, void *arg)
+{
+ gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_panic_notifier = {
+ .notifier_call = gsmi_panic_callback,
+};
+
+/*
+ * This hash function was blatantly copied from include/linux/hash.h.
+ * It is used by this driver to obfuscate a board name that requires a
+ * quirk within this driver.
+ *
+ * Please do not remove this copy of the function as any changes to the
+ * global utility hash_64() function would break this driver's ability
+ * to identify a board and provide the appropriate quirk -- mikew@google.com
+ */
+static u64 __init local_hash_64(u64 val, unsigned bits)
+{
+ u64 hash = val;
+
+ /* Sigh, gcc can't optimise this alone like it does for 32 bits. */
+ u64 n = hash;
+ n <<= 18;
+ hash -= n;
+ n <<= 33;
+ hash -= n;
+ n <<= 3;
+ hash += n;
+ n <<= 3;
+ hash -= n;
+ n <<= 4;
+ hash += n;
+ n <<= 2;
+ hash += n;
+
+ /* High bits are more random, so use them. */
+ return hash >> (64 - bits);
+}
+
+static u32 __init hash_oem_table_id(char s[8])
+{
+ u64 input;
+ memcpy(&input, s, 8);
+ return local_hash_64(input, 32);
+}
+
+static struct dmi_system_id gsmi_dmi_table[] __initdata = {
+ {
+ .ident = "Google Board",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+ },
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
+
+static __init int gsmi_system_valid(void)
+{
+ u32 hash;
+
+ if (!dmi_check_system(gsmi_dmi_table))
+ return -ENODEV;
+
+ /*
+ * Only newer firmware supports the gsmi interface. All older
+ * firmware that didn't support this interface used to plug the
+ * table name in the first four bytes of the oem_table_id field.
+ * Newer firmware doesn't do that though, so use that as the
+ * discriminant factor. We have to do this in order to
+ * whitewash our board names out of the public driver.
+ */
+ if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
+ printk(KERN_INFO "gsmi: Board is too old\n");
+ return -ENODEV;
+ }
+
+ /* Disable on board with 1.0 BIOS due to Google bug 2602657 */
+ hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
+ if (hash == QUIRKY_BOARD_HASH) {
+ const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
+ if (strncmp(bios_ver, "1.0", 3) == 0) {
+ pr_info("gsmi: disabled on this board's BIOS %s\n",
+ bios_ver);
+ return -ENODEV;
+ }
+ }
+
+ /* check for valid SMI command port in ACPI FADT */
+ if (acpi_gbl_FADT.smi_command == 0) {
+ pr_info("gsmi: missing smi_command\n");
+ return -ENODEV;
+ }
+
+ /* Found */
+ return 0;
+}
+
+static struct kobject *gsmi_kobj;
+static struct efivars efivars;
+
+static __init int gsmi_init(void)
+{
+ unsigned long flags;
+ int ret;
+
+ ret = gsmi_system_valid();
+ if (ret)
+ return ret;
+
+ gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
+
+ /* register device */
+ gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
+ if (IS_ERR(gsmi_dev.pdev)) {
+ printk(KERN_ERR "gsmi: unable to register platform device\n");
+ return PTR_ERR(gsmi_dev.pdev);
+ }
+
+ /* SMI access needs to be serialized */
+ spin_lock_init(&gsmi_dev.lock);
+
+ /* SMI callbacks require 32bit addresses */
+ gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ gsmi_dev.pdev->dev.dma_mask =
+ &gsmi_dev.pdev->dev.coherent_dma_mask;
+ ret = -ENOMEM;
+ gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
+ GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
+ if (!gsmi_dev.dma_pool)
+ goto out_err;
+
+ /*
+ * pre-allocate buffers because sometimes we are called when
+ * this is not feasible: oops, panic, die, mce, etc
+ */
+ gsmi_dev.name_buf = gsmi_buf_alloc();
+ if (!gsmi_dev.name_buf) {
+ printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+ goto out_err;
+ }
+
+ gsmi_dev.data_buf = gsmi_buf_alloc();
+ if (!gsmi_dev.data_buf) {
+ printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+ goto out_err;
+ }
+
+ gsmi_dev.param_buf = gsmi_buf_alloc();
+ if (!gsmi_dev.param_buf) {
+ printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+ goto out_err;
+ }
+
+ /*
+ * Determine type of handshake used to serialize the SMI
+ * entry. See also gsmi_exec().
+ *
+ * There's a "behavior" present on some chipsets where writing the
+ * SMI trigger register in the southbridge doesn't result in an
+ * immediate SMI. Rather, the processor can execute "a few" more
+ * instructions before the SMI takes effect. To ensure synchronous
+ * behavior, implement a handshake between the kernel driver and the
+ * firmware handler to spin until released. This ioctl determines
+ * the type of handshake.
+ *
+ * NONE: The firmware handler does not implement any
+ * handshake. Either it doesn't need to, or it's legacy firmware
+ * that doesn't know it needs to and never will.
+ *
+ * CF: The firmware handler will clear the CF in the saved
+ * state before returning. The driver may set the CF and test for
+ * it to clear before proceeding.
+ *
+ * SPIN: The firmware handler does not implement any handshake
+ * but the driver should spin for a hundred or so microseconds
+ * to ensure the SMI has triggered.
+ *
+ * Finally, the handler will return -ENOSYS if
+ * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
+ * HANDSHAKE_NONE.
+ */
+ spin_lock_irqsave(&gsmi_dev.lock, flags);
+ gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
+ gsmi_dev.handshake_type =
+ gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
+ if (gsmi_dev.handshake_type == -ENOSYS)
+ gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
+ spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+ /* Remove and clean up gsmi if the handshake could not complete. */
+ if (gsmi_dev.handshake_type == -ENXIO) {
+ printk(KERN_INFO "gsmi version " DRIVER_VERSION
+ " failed to load\n");
+ ret = -ENODEV;
+ goto out_err;
+ }
+
+ printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+
+ /* Register in the firmware directory */
+ ret = -ENOMEM;
+ gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
+ if (!gsmi_kobj) {
+ printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+ goto out_err;
+ }
+
+ /* Setup eventlog access */
+ ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
+ if (ret) {
+ printk(KERN_INFO "gsmi: Failed to setup eventlog");
+ goto out_err;
+ }
+
+ /* Other attributes */
+ ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
+ if (ret) {
+ printk(KERN_INFO "gsmi: Failed to add attrs");
+ goto out_err;
+ }
+
+ if (register_efivars(&efivars, &efivar_ops, gsmi_kobj)) {
+ printk(KERN_INFO "gsmi: Failed to register efivars\n");
+ goto out_err;
+ }
+
+ register_reboot_notifier(&gsmi_reboot_notifier);
+ register_die_notifier(&gsmi_die_notifier);
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &gsmi_panic_notifier);
+
+ return 0;
+
+ out_err:
+ kobject_put(gsmi_kobj);
+ gsmi_buf_free(gsmi_dev.param_buf);
+ gsmi_buf_free(gsmi_dev.data_buf);
+ gsmi_buf_free(gsmi_dev.name_buf);
+ if (gsmi_dev.dma_pool)
+ dma_pool_destroy(gsmi_dev.dma_pool);
+ platform_device_unregister(gsmi_dev.pdev);
+ pr_info("gsmi: failed to load: %d\n", ret);
+ return ret;
+}
+
+static void __exit gsmi_exit(void)
+{
+ unregister_reboot_notifier(&gsmi_reboot_notifier);
+ unregister_die_notifier(&gsmi_die_notifier);
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &gsmi_panic_notifier);
+ unregister_efivars(&efivars);
+
+ kobject_put(gsmi_kobj);
+ gsmi_buf_free(gsmi_dev.param_buf);
+ gsmi_buf_free(gsmi_dev.data_buf);
+ gsmi_buf_free(gsmi_dev.name_buf);
+ dma_pool_destroy(gsmi_dev.dma_pool);
+ platform_device_unregister(gsmi_dev.pdev);
+}
+
+module_init(gsmi_init);
+module_exit(gsmi_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole.c b/drivers/firmware/google/memconsole.c
new file mode 100644
index 0000000..2a90ba6
--- /dev/null
+++ b/drivers/firmware/google/memconsole.c
@@ -0,0 +1,166 @@
+/*
+ * memconsole.c
+ *
+ * Infrastructure for importing the BIOS memory based console
+ * into the kernel log ringbuffer.
+ *
+ * Copyright 2010 Google Inc. All rights reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_MEMCONSOLE_V1_MAGIC 0xDEADBABE
+#define BIOS_MEMCONSOLE_V2_MAGIC (('M')|('C'<<8)|('O'<<16)|('N'<<24))
+
+struct biosmemcon_ebda {
+ u32 signature;
+ union {
+ struct {
+ u8 enabled;
+ u32 buffer_addr;
+ u16 start;
+ u16 end;
+ u16 num_chars;
+ u8 wrapped;
+ } __packed v1;
+ struct {
+ u32 buffer_addr;
+ /* Misdocumented as number of pages! */
+ u16 num_bytes;
+ u16 start;
+ u16 end;
+ } __packed v2;
+ };
+} __packed;
+
+static char *memconsole_baseaddr;
+static size_t memconsole_length;
+
+static ssize_t memconsole_read(struct file *filp, struct kobject *kobp,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t pos, size_t count)
+{
+ return memory_read_from_buffer(buf, count, &pos, memconsole_baseaddr,
+ memconsole_length);
+}
+
+static struct bin_attribute memconsole_bin_attr = {
+ .attr = {.name = "log", .mode = 0444},
+ .read = memconsole_read,
+};
+
+
+static void found_v1_header(struct biosmemcon_ebda *hdr)
+{
+ printk(KERN_INFO "BIOS console v1 EBDA structure found at %p\n", hdr);
+ printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+ "start = %d, end = %d, num = %d\n",
+ hdr->v1.buffer_addr, hdr->v1.start,
+ hdr->v1.end, hdr->v1.num_chars);
+
+ memconsole_length = hdr->v1.num_chars;
+ memconsole_baseaddr = phys_to_virt(hdr->v1.buffer_addr);
+}
+
+static void found_v2_header(struct biosmemcon_ebda *hdr)
+{
+ printk(KERN_INFO "BIOS console v2 EBDA structure found at %p\n", hdr);
+ printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+ "start = %d, end = %d, num_bytes = %d\n",
+ hdr->v2.buffer_addr, hdr->v2.start,
+ hdr->v2.end, hdr->v2.num_bytes);
+
+ memconsole_length = hdr->v2.end - hdr->v2.start;
+ memconsole_baseaddr = phys_to_virt(hdr->v2.buffer_addr
+ + hdr->v2.start);
+}
+
+/*
+ * Search through the EBDA for the BIOS Memory Console, and
+ * set the global variables to point to it. Return true if found.
+ */
+static bool found_memconsole(void)
+{
+ unsigned int address;
+ size_t length, cur;
+
+ address = get_bios_ebda();
+ if (!address) {
+ printk(KERN_INFO "BIOS EBDA non-existent.\n");
+ return false;
+ }
+
+ /* EBDA length is byte 0 of EBDA (in KB) */
+ length = *(u8 *)phys_to_virt(address);
+ length <<= 10; /* convert to bytes */
+
+ /*
+ * Search through EBDA for BIOS memory console structure
+ * note: signature is not necessarily dword-aligned
+ */
+ for (cur = 0; cur < length; cur++) {
+ struct biosmemcon_ebda *hdr = phys_to_virt(address + cur);
+
+ /* memconsole v1 */
+ if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) {
+ found_v1_header(hdr);
+ return true;
+ }
+
+ /* memconsole v2 */
+ if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) {
+ found_v2_header(hdr);
+ return true;
+ }
+ }
+
+ printk(KERN_INFO "BIOS console EBDA structure not found!\n");
+ return false;
+}
+
+static struct dmi_system_id memconsole_dmi_table[] __initdata = {
+ {
+ .ident = "Google Board",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+ },
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table);
+
+static int __init memconsole_init(void)
+{
+ int ret;
+
+ if (!dmi_check_system(memconsole_dmi_table))
+ return -ENODEV;
+
+ if (!found_memconsole())
+ return -ENODEV;
+
+ memconsole_bin_attr.size = memconsole_length;
+
+ ret = sysfs_create_bin_file(firmware_kobj, &memconsole_bin_attr);
+
+ return ret;
+}
+
+static void __exit memconsole_exit(void)
+{
+ sysfs_remove_bin_file(firmware_kobj, &memconsole_bin_attr);
+}
+
+module_init(memconsole_init);
+module_exit(memconsole_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 2192456..f032e44 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -42,7 +42,20 @@
struct acpi_table_ibft *ibft_addr;
EXPORT_SYMBOL_GPL(ibft_addr);
-#define IBFT_SIGN "iBFT"
+static const struct {
+ char *sign;
+} ibft_signs[] = {
+#ifdef CONFIG_ACPI
+ /*
+ * One spec says "IBFT", the other says "iBFT". We have to check
+ * for both.
+ */
+ { ACPI_SIG_IBFT },
+#endif
+ { "iBFT" },
+ { "BIFT" }, /* Broadcom iSCSI Offload */
+};
+
#define IBFT_SIGN_LEN 4
#define IBFT_START 0x80000 /* 512kB */
#define IBFT_END 0x100000 /* 1MB */
@@ -62,6 +75,7 @@
unsigned long pos;
unsigned int len = 0;
void *virt;
+ int i;
for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
/* The table can't be inside the VGA BIOS reserved space,
@@ -69,18 +83,23 @@
if (pos == VGA_MEM)
pos += VGA_SIZE;
virt = isa_bus_to_virt(pos);
- if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
- unsigned long *addr =
- (unsigned long *)isa_bus_to_virt(pos + 4);
- len = *addr;
- /* if the length of the table extends past 1M,
- * the table cannot be valid. */
- if (pos + len <= (IBFT_END-1)) {
- ibft_addr = (struct acpi_table_ibft *)virt;
- break;
+
+ for (i = 0; i < ARRAY_SIZE(ibft_signs); i++) {
+ if (memcmp(virt, ibft_signs[i].sign, IBFT_SIGN_LEN) ==
+ 0) {
+ unsigned long *addr =
+ (unsigned long *)isa_bus_to_virt(pos + 4);
+ len = *addr;
+ /* if the length of the table extends past 1M,
+ * the table cannot be valid. */
+ if (pos + len <= (IBFT_END-1)) {
+ ibft_addr = (struct acpi_table_ibft *)virt;
+ goto done;
+ }
}
}
}
+done:
return len;
}
/*
@@ -89,18 +108,12 @@
*/
unsigned long __init find_ibft_region(unsigned long *sizep)
{
-
+ int i;
ibft_addr = NULL;
#ifdef CONFIG_ACPI
- /*
- * One spec says "IBFT", the other says "iBFT". We have to check
- * for both.
- */
- if (!ibft_addr)
- acpi_table_parse(ACPI_SIG_IBFT, acpi_find_ibft);
- if (!ibft_addr)
- acpi_table_parse(IBFT_SIGN, acpi_find_ibft);
+ for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
+ acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
#endif /* CONFIG_ACPI */
/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 11d7a72..140b952 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -1516,17 +1516,33 @@
}
EXPORT_SYMBOL(drm_fb_helper_initial_config);
-bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
+/**
+ * drm_fb_helper_hotplug_event - respond to a hotplug notification by
+ * probing all the outputs attached to the fb.
+ * @fb_helper: the drm_fb_helper
+ *
+ * LOCKING:
+ * Called at runtime, must take mode config lock.
+ *
+ * Scan the connectors attached to the fb_helper and try to put together a
+ * setup after *notification of a change in output configuration.
+ *
+ * RETURNS:
+ * 0 on success and a non-zero error code otherwise.
+ */
+int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
{
+ struct drm_device *dev = fb_helper->dev;
int count = 0;
u32 max_width, max_height, bpp_sel;
bool bound = false, crtcs_bound = false;
struct drm_crtc *crtc;
if (!fb_helper->fb)
- return false;
+ return 0;
- list_for_each_entry(crtc, &fb_helper->dev->mode_config.crtc_list, head) {
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (crtc->fb)
crtcs_bound = true;
if (crtc->fb == fb_helper->fb)
@@ -1535,7 +1551,8 @@
if (!bound && crtcs_bound) {
fb_helper->delayed_hotplug = true;
- return false;
+ mutex_unlock(&dev->mode_config.mutex);
+ return 0;
}
DRM_DEBUG_KMS("\n");
@@ -1546,6 +1563,7 @@
count = drm_fb_helper_probe_connector_modes(fb_helper, max_width,
max_height);
drm_setup_crtcs(fb_helper);
+ mutex_unlock(&dev->mode_config.mutex);
return drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
}
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 741457b..a1f12cb 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -932,11 +932,34 @@
void drm_vblank_off(struct drm_device *dev, int crtc)
{
+ struct drm_pending_vblank_event *e, *t;
+ struct timeval now;
unsigned long irqflags;
+ unsigned int seq;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
vblank_disable_and_save(dev, crtc);
DRM_WAKEUP(&dev->vbl_queue[crtc]);
+
+ /* Send any queued vblank events, lest the natives grow disquiet */
+ seq = drm_vblank_count_and_time(dev, crtc, &now);
+ list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
+ if (e->pipe != crtc)
+ continue;
+ DRM_DEBUG("Sending premature vblank event on disable: \
+ wanted %d, current %d\n",
+ e->event.sequence, seq);
+
+ e->event.sequence = seq;
+ e->event.tv_sec = now.tv_sec;
+ e->event.tv_usec = now.tv_usec;
+ drm_vblank_put(dev, e->pipe);
+ list_move_tail(&e->base.link, &e->base.file_priv->event_list);
+ wake_up_interruptible(&e->base.file_priv->event_wait);
+ trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
+ e->event.sequence);
+ }
+
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
EXPORT_SYMBOL(drm_vblank_off);
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 5d00b0f..959186c 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -431,7 +431,7 @@
void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new)
{
list_replace(&old->node_list, &new->node_list);
- list_replace(&old->node_list, &new->hole_stack);
+ list_replace(&old->hole_stack, &new->hole_stack);
new->hole_follows = old->hole_follows;
new->mm = old->mm;
new->start = old->start;
@@ -699,8 +699,8 @@
entry->size);
total_used += entry->size;
if (entry->hole_follows) {
- hole_start = drm_mm_hole_node_start(&mm->head_node);
- hole_end = drm_mm_hole_node_end(&mm->head_node);
+ hole_start = drm_mm_hole_node_start(entry);
+ hole_end = drm_mm_hole_node_end(entry);
hole_size = hole_end - hole_start;
seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n",
hole_start, hole_end, hole_size);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index c34a8dd..32d1b3e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -49,7 +49,7 @@
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0600);
-unsigned int i915_semaphores = 1;
+unsigned int i915_semaphores = 0;
module_param_named(semaphores, i915_semaphores, int, 0600);
unsigned int i915_enable_rc6 = 0;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e522c70..2166ee0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5605,9 +5605,9 @@
intel_clock_t clock;
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
- fp = FP0(pipe);
+ fp = I915_READ(FP0(pipe));
else
- fp = FP1(pipe);
+ fp = I915_READ(FP1(pipe));
clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
if (IS_PINEVIEW(dev)) {
@@ -6579,8 +6579,10 @@
return ERR_PTR(-ENOENT);
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
- if (!intel_fb)
+ if (!intel_fb) {
+ drm_gem_object_unreference_unlocked(&obj->base);
return ERR_PTR(-ENOMEM);
+ }
ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
if (ret) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index cb8578b..a4d8031 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1470,7 +1470,8 @@
if (!HAS_PCH_CPT(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
- struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+ struct drm_crtc *crtc = intel_dp->base.base.crtc;
+
/* Hardware workaround: leaving our transcoder select
* set to transcoder B while it's off will prevent the
* corresponding HDMI output on transcoder A.
@@ -1485,7 +1486,19 @@
/* Changes to enable or select take place the vblank
* after being written.
*/
- intel_wait_for_vblank(dev, intel_crtc->pipe);
+ if (crtc == NULL) {
+ /* We can arrive here never having been attached
+ * to a CRTC, for instance, due to inheriting
+ * random state from the BIOS.
+ *
+ * If the pipe is not running, play safe and
+ * wait for the clocks to stabilise before
+ * continuing.
+ */
+ POSTING_READ(intel_dp->output_reg);
+ msleep(50);
+ } else
+ intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
}
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index a562bd2..67cb076 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -539,6 +539,9 @@
struct drm_device *dev = dev_priv->dev;
struct drm_connector *connector = dev_priv->int_lvds_connector;
+ if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
+ return NOTIFY_OK;
+
/*
* check and update the status of LVDS connector after receiving
* the LID nofication event.
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 5045f8b..c3e953b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -152,8 +152,6 @@
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- nouveau_bo_ref(NULL, &dev_priv->vga_ram);
-
ttm_bo_device_release(&dev_priv->ttm.bdev);
nouveau_ttm_global_release(dev_priv);
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 4bce801..c77111e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -42,7 +42,8 @@
nvbe->nr_pages = 0;
while (num_pages--) {
- if (dma_addrs[nvbe->nr_pages] != DMA_ERROR_CODE) {
+ /* this code path isn't called and is incorrect anyways */
+ if (0) { /*dma_addrs[nvbe->nr_pages] != DMA_ERROR_CODE)*/
nvbe->pages[nvbe->nr_pages] =
dma_addrs[nvbe->nr_pages];
nvbe->ttm_alloced[nvbe->nr_pages] = true;
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index a30adec..915fbce 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -768,6 +768,11 @@
engine->mc.takedown(dev);
engine->display.late_takedown(dev);
+ if (dev_priv->vga_ram) {
+ nouveau_bo_unpin(dev_priv->vga_ram);
+ nouveau_bo_ref(NULL, &dev_priv->vga_ram);
+ }
+
mutex_lock(&dev->struct_mutex);
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index e9bc135..9073e3b 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -862,9 +862,15 @@
SYSTEM_ACCESS_MODE_NOT_IN_SYS |
SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU |
EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5);
- WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
- WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
- WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+ if (rdev->flags & RADEON_IS_IGP) {
+ WREG32(FUS_MC_VM_MD_L1_TLB0_CNTL, tmp);
+ WREG32(FUS_MC_VM_MD_L1_TLB1_CNTL, tmp);
+ WREG32(FUS_MC_VM_MD_L1_TLB2_CNTL, tmp);
+ } else {
+ WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
+ WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
+ WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+ }
WREG32(MC_VM_MB_L1_TLB0_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
@@ -1774,7 +1780,10 @@
mc_shared_chmap = RREG32(MC_SHARED_CHMAP);
- mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
+ if (rdev->flags & RADEON_IS_IGP)
+ mc_arb_ramcfg = RREG32(FUS_MC_ARB_RAMCFG);
+ else
+ mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
switch (rdev->config.evergreen.max_tile_pipes) {
case 1:
@@ -2923,11 +2932,6 @@
rdev->asic->copy = NULL;
dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
}
- /* XXX: ontario has problems blitting to gart at the moment */
- if (rdev->family == CHIP_PALM) {
- rdev->asic->copy = NULL;
- radeon_ttm_set_active_vram_size(rdev, rdev->mc.visible_vram_size);
- }
/* allocate wb buffer */
r = radeon_wb_init(rdev);
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 9aaa3f0..fc40e0c 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -200,6 +200,7 @@
#define BURSTLENGTH_SHIFT 9
#define BURSTLENGTH_MASK 0x00000200
#define CHANSIZE_OVERRIDE (1 << 11)
+#define FUS_MC_ARB_RAMCFG 0x2768
#define MC_VM_AGP_TOP 0x2028
#define MC_VM_AGP_BOT 0x202C
#define MC_VM_AGP_BASE 0x2030
@@ -221,6 +222,11 @@
#define MC_VM_MD_L1_TLB0_CNTL 0x2654
#define MC_VM_MD_L1_TLB1_CNTL 0x2658
#define MC_VM_MD_L1_TLB2_CNTL 0x265C
+
+#define FUS_MC_VM_MD_L1_TLB0_CNTL 0x265C
+#define FUS_MC_VM_MD_L1_TLB1_CNTL 0x2660
+#define FUS_MC_VM_MD_L1_TLB2_CNTL 0x2664
+
#define MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR 0x203C
#define MC_VM_SYSTEM_APERTURE_HIGH_ADDR 0x2038
#define MC_VM_SYSTEM_APERTURE_LOW_ADDR 0x2034
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 7aade20..3d8a763 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -674,7 +674,7 @@
cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE);
cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG);
- cgts_tcc_disable = RREG32(CGTS_TCC_DISABLE);
+ cgts_tcc_disable = 0xff000000;
gc_user_rb_backend_disable = RREG32(GC_USER_RB_BACKEND_DISABLE);
gc_user_shader_pipe_config = RREG32(GC_USER_SHADER_PIPE_CONFIG);
cgts_user_tcc_disable = RREG32(CGTS_USER_TCC_DISABLE);
@@ -871,7 +871,7 @@
smx_dc_ctl0 = RREG32(SMX_DC_CTL0);
smx_dc_ctl0 &= ~NUMBER_OF_SETS(0x1ff);
- smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
+ smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.cayman.sx_num_of_sets);
WREG32(SMX_DC_CTL0, smx_dc_ctl0);
WREG32(SPI_CONFIG_CNTL_1, VTX_DONE_DELAY(4) | CRC_SIMD_ID_WADDR_DISABLE);
@@ -887,20 +887,20 @@
WREG32(TA_CNTL_AUX, DISABLE_CUBE_ANISO);
- WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
- POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
- SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
+ WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.cayman.sx_max_export_size / 4) - 1) |
+ POSITION_BUFFER_SIZE((rdev->config.cayman.sx_max_export_pos_size / 4) - 1) |
+ SMX_BUFFER_SIZE((rdev->config.cayman.sx_max_export_smx_size / 4) - 1)));
- WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.evergreen.sc_prim_fifo_size) |
- SC_HIZ_TILE_FIFO_SIZE(rdev->config.evergreen.sc_hiz_tile_fifo_size) |
- SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.evergreen.sc_earlyz_tile_fifo_size)));
+ WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.cayman.sc_prim_fifo_size) |
+ SC_HIZ_TILE_FIFO_SIZE(rdev->config.cayman.sc_hiz_tile_fifo_size) |
+ SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.cayman.sc_earlyz_tile_fifo_size)));
WREG32(VGT_NUM_INSTANCES, 1);
WREG32(CP_PERFMON_CNTL, 0);
- WREG32(SQ_MS_FIFO_SIZES, (CACHE_FIFO_SIZE(16 * rdev->config.evergreen.sq_num_cf_insts) |
+ WREG32(SQ_MS_FIFO_SIZES, (CACHE_FIFO_SIZE(16 * rdev->config.cayman.sq_num_cf_insts) |
FETCH_FIFO_HIWATER(0x4) |
DONE_FIFO_HIWATER(0xe0) |
ALU_UPDATE_FIFO_HIWATER(0x8)));
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index f5d12fb..90dfb2b 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -431,7 +431,7 @@
}
}
- /* Acer laptop (Acer TravelMate 5730G) has an HDMI port
+ /* Acer laptop (Acer TravelMate 5730/5730G) has an HDMI port
* on the laptop and a DVI port on the docking station and
* both share the same encoder, hpd pin, and ddc line.
* So while the bios table is technically correct,
@@ -440,7 +440,7 @@
* with different crtcs which isn't possible on the hardware
* side and leaves no crtcs for LVDS or VGA.
*/
- if ((dev->pdev->device == 0x95c4) &&
+ if (((dev->pdev->device == 0x95c4) || (dev->pdev->device == 0x9591)) &&
(dev->pdev->subsystem_vendor == 0x1025) &&
(dev->pdev->subsystem_device == 0x013c)) {
if ((*connector_type == DRM_MODE_CONNECTOR_DVII) &&
@@ -1574,9 +1574,17 @@
ATOM_FAKE_EDID_PATCH_RECORD *fake_edid_record;
ATOM_PANEL_RESOLUTION_PATCH_RECORD *panel_res_record;
bool bad_record = false;
- u8 *record = (u8 *)(mode_info->atom_context->bios +
- data_offset +
- le16_to_cpu(lvds_info->info.usModePatchTableOffset));
+ u8 *record;
+
+ if ((frev == 1) && (crev < 2))
+ /* absolute */
+ record = (u8 *)(mode_info->atom_context->bios +
+ le16_to_cpu(lvds_info->info.usModePatchTableOffset));
+ else
+ /* relative */
+ record = (u8 *)(mode_info->atom_context->bios +
+ data_offset +
+ le16_to_cpu(lvds_info->info.usModePatchTableOffset));
while (*record != ATOM_RECORD_END_TYPE) {
switch (*record) {
case LCD_MODE_PATCH_RECORD_MODE_TYPE:
@@ -1599,9 +1607,10 @@
memcpy((u8 *)edid, (u8 *)&fake_edid_record->ucFakeEDIDString[0],
fake_edid_record->ucFakeEDIDLength);
- if (drm_edid_is_valid(edid))
+ if (drm_edid_is_valid(edid)) {
rdev->mode_info.bios_hardcoded_edid = edid;
- else
+ rdev->mode_info.bios_hardcoded_edid_size = edid_size;
+ } else
kfree(edid);
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index ed5dfe5..9d95792 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -15,6 +15,9 @@
#define ATPX_VERSION 0
#define ATPX_GPU_PWR 2
#define ATPX_MUX_SELECT 3
+#define ATPX_I2C_MUX_SELECT 4
+#define ATPX_SWITCH_START 5
+#define ATPX_SWITCH_END 6
#define ATPX_INTEGRATED 0
#define ATPX_DISCRETE 1
@@ -149,13 +152,35 @@
return radeon_atpx_execute(handle, ATPX_MUX_SELECT, mux_id);
}
+static int radeon_atpx_switch_i2c_mux(acpi_handle handle, int mux_id)
+{
+ return radeon_atpx_execute(handle, ATPX_I2C_MUX_SELECT, mux_id);
+}
+
+static int radeon_atpx_switch_start(acpi_handle handle, int gpu_id)
+{
+ return radeon_atpx_execute(handle, ATPX_SWITCH_START, gpu_id);
+}
+
+static int radeon_atpx_switch_end(acpi_handle handle, int gpu_id)
+{
+ return radeon_atpx_execute(handle, ATPX_SWITCH_END, gpu_id);
+}
static int radeon_atpx_switchto(enum vga_switcheroo_client_id id)
{
+ int gpu_id;
+
if (id == VGA_SWITCHEROO_IGD)
- radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, 0);
+ gpu_id = ATPX_INTEGRATED;
else
- radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, 1);
+ gpu_id = ATPX_DISCRETE;
+
+ radeon_atpx_switch_start(radeon_atpx_priv.atpx_handle, gpu_id);
+ radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, gpu_id);
+ radeon_atpx_switch_i2c_mux(radeon_atpx_priv.atpx_handle, gpu_id);
+ radeon_atpx_switch_end(radeon_atpx_priv.atpx_handle, gpu_id);
+
return 0;
}
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index bdf2fa1..3189a7e 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -167,9 +167,6 @@
return -EINVAL;
}
- radeon_crtc->cursor_width = width;
- radeon_crtc->cursor_height = height;
-
obj = drm_gem_object_lookup(crtc->dev, file_priv, handle);
if (!obj) {
DRM_ERROR("Cannot find cursor object %x for crtc %d\n", handle, radeon_crtc->crtc_id);
@@ -180,6 +177,9 @@
if (ret)
goto fail;
+ radeon_crtc->cursor_width = width;
+ radeon_crtc->cursor_height = height;
+
radeon_lock_cursor(crtc, true);
/* XXX only 27 bit offset for legacy cursor */
radeon_set_cursor(crtc, obj, gpu_addr);
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 8a955bb..a533f52 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -181,9 +181,9 @@
p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE);
for (i = 0; i < pages; i++, p++) {
- /* On TTM path, we only use the DMA API if TTM_PAGE_FLAG_DMA32
- * is requested. */
- if (dma_addr[i] != DMA_ERROR_CODE) {
+ /* we reverted the patch using dma_addr in TTM for now but this
+ * code stops building on alpha so just comment it out for now */
+ if (0) { /*dma_addr[i] != DMA_ERROR_CODE) */
rdev->gart.ttm_alloced[p] = true;
rdev->gart.pages_addr[p] = dma_addr[i];
} else {
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 871df03..bd58af6 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -234,6 +234,9 @@
return -EINVAL;
}
break;
+ case RADEON_INFO_FUSION_GART_WORKING:
+ value = 1;
+ break;
default:
DRM_DEBUG_KMS("Invalid request %d\n", info->request);
return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/reg_srcs/cayman b/drivers/gpu/drm/radeon/reg_srcs/cayman
index 6334f8a..0aa8e85 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/cayman
+++ b/drivers/gpu/drm/radeon/reg_srcs/cayman
@@ -33,6 +33,7 @@
0x00008E48 SQ_EX_ALLOC_TABLE_SLOTS
0x00009100 SPI_CONFIG_CNTL
0x0000913C SPI_CONFIG_CNTL_1
+0x00009508 TA_CNTL_AUX
0x00009830 DB_DEBUG
0x00009834 DB_DEBUG2
0x00009838 DB_DEBUG3
diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen
index 7e16371..0e28cae 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/evergreen
+++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen
@@ -46,6 +46,7 @@
0x00008E48 SQ_EX_ALLOC_TABLE_SLOTS
0x00009100 SPI_CONFIG_CNTL
0x0000913C SPI_CONFIG_CNTL_1
+0x00009508 TA_CNTL_AUX
0x00009700 VC_CNTL
0x00009714 VC_ENHANCE
0x00009830 DB_DEBUG
diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index e01cacb..498b284 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -219,9 +219,6 @@
int i;
struct vga_switcheroo_client *active = NULL;
- if (new_client->active == true)
- return 0;
-
for (i = 0; i < VGA_SWITCHEROO_MAX_CLIENTS; i++) {
if (vgasr_priv.clients[i].active == true) {
active = &vgasr_priv.clients[i];
@@ -372,6 +369,9 @@
goto out;
}
+ if (client->active == true)
+ goto out;
+
/* okay we want a switch - test if devices are willing to switch */
can_switch = true;
for (i = 0; i < VGA_SWITCHEROO_MAX_CLIENTS; i++) {
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index de58191..5724074 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -98,7 +98,6 @@
static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
{
int ret;
- int status;
struct device *hwmon;
ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group);
@@ -107,7 +106,7 @@
hwmon = hwmon_device_register(&pdev->dev);
if (IS_ERR(hwmon)) {
dev_err(&pdev->dev, "hwmon_device_register failed.\n");
- status = PTR_ERR(hwmon);
+ ret = PTR_ERR(hwmon);
goto err_reg;
}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 72c0415f..455e909 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -134,10 +134,15 @@
SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
SMBHSTSTS_INTR)
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
struct i801_priv {
struct i2c_adapter adapter;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 75b984c..107397a 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -560,15 +560,18 @@
.timeout = HZ,
};
+static const struct of_device_id mpc_i2c_of_match[];
static int __devinit fsl_i2c_probe(struct platform_device *op)
{
+ const struct of_device_id *match;
struct mpc_i2c *i2c;
const u32 *prop;
u32 clock = MPC_I2C_CLOCK_LEGACY;
int result = 0;
int plen;
- if (!op->dev.of_match)
+ match = of_match_device(mpc_i2c_of_match, &op->dev);
+ if (!match)
return -EINVAL;
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
@@ -605,8 +608,8 @@
clock = *prop;
}
- if (op->dev.of_match->data) {
- struct mpc_i2c_data *data = op->dev.of_match->data;
+ if (match->data) {
+ struct mpc_i2c_data *data = match->data;
data->setup(op->dev.of_node, i2c, clock, data->prescaler);
} else {
/* Backwards compatibility */
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 0eb1515..2dbba16 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------ *
* i2c-parport.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
- Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
Based on older i2c-philips-par.c driver
Copyright (C) 1995-2000 Simon G. Vogl
@@ -33,6 +33,8 @@
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-smbus.h>
#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
#include "i2c-parport.h"
/* ----- Device list ------------------------------------------------------ */
@@ -43,10 +45,11 @@
struct i2c_algo_bit_data algo_data;
struct i2c_smbus_alert_setup alert_data;
struct i2c_client *ara;
- struct i2c_par *next;
+ struct list_head node;
};
-static struct i2c_par *adapter_list;
+static LIST_HEAD(adapter_list);
+static DEFINE_MUTEX(adapter_list_lock);
/* ----- Low-level parallel port access ----------------------------------- */
@@ -228,8 +231,9 @@
}
/* Add the new adapter to the list */
- adapter->next = adapter_list;
- adapter_list = adapter;
+ mutex_lock(&adapter_list_lock);
+ list_add_tail(&adapter->node, &adapter_list);
+ mutex_unlock(&adapter_list_lock);
return;
ERROR1:
@@ -241,11 +245,11 @@
static void i2c_parport_detach (struct parport *port)
{
- struct i2c_par *adapter, *prev;
+ struct i2c_par *adapter, *_n;
/* Walk the list */
- for (prev = NULL, adapter = adapter_list; adapter;
- prev = adapter, adapter = adapter->next) {
+ mutex_lock(&adapter_list_lock);
+ list_for_each_entry_safe(adapter, _n, &adapter_list, node) {
if (adapter->pdev->port == port) {
if (adapter->ara) {
parport_disable_irq(port);
@@ -259,14 +263,11 @@
parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
- if (prev)
- prev->next = adapter->next;
- else
- adapter_list = adapter->next;
+ list_del(&adapter->node);
kfree(adapter);
- return;
}
}
+ mutex_unlock(&adapter_list_lock);
}
static struct parport_driver i2c_parport_driver = {
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index a97e3fe..04be9f82 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -65,7 +65,7 @@
jiffies, expires);
timer->expires = jiffies + expires;
- timer->data = (unsigned long)&alg_data;
+ timer->data = (unsigned long)alg_data;
add_timer(timer);
}
diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index d9d0e13..a5a49a1 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -393,16 +393,6 @@
priv = netdev_priv(dev);
priv->phy = phy;
- /*
- * If the name is a format string the caller wants us to do a
- * name allocation.
- */
- if (strchr(dev->name, '%')) {
- err = dev_alloc_name(dev, dev->name);
- if (err < 0)
- goto out;
- }
-
wpan_phy_set_dev(phy, &pdev->dev);
SET_NETDEV_DEV(dev, &phy->dev);
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index 4ffc224..8e21d45 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -185,15 +185,20 @@
__be32 dst_ip = dst_in->sin_addr.s_addr;
struct rtable *rt;
struct neighbour *neigh;
+ struct flowi4 fl4;
int ret;
- rt = ip_route_output(&init_net, dst_ip, src_ip, 0, addr->bound_dev_if);
+ memset(&fl4, 0, sizeof(fl4));
+ fl4.daddr = dst_ip;
+ fl4.saddr = src_ip;
+ fl4.flowi4_oif = addr->bound_dev_if;
+ rt = ip_route_output_key(&init_net, &fl4);
if (IS_ERR(rt)) {
ret = PTR_ERR(rt);
goto out;
}
src_in->sin_family = AF_INET;
- src_in->sin_addr.s_addr = rt->rt_src;
+ src_in->sin_addr.s_addr = fl4.saddr;
if (rt->dst.dev->flags & IFF_LOOPBACK) {
ret = rdma_translate_ip((struct sockaddr *) dst_in, addr);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 5ed9d25..99dde87 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -148,6 +148,7 @@
u32 qp_num;
u8 srq;
u8 tos;
+ u8 reuseaddr;
};
struct cma_multicast {
@@ -712,6 +713,21 @@
return cma_zero_addr(addr) || cma_loopback_addr(addr);
}
+static int cma_addr_cmp(struct sockaddr *src, struct sockaddr *dst)
+{
+ if (src->sa_family != dst->sa_family)
+ return -1;
+
+ switch (src->sa_family) {
+ case AF_INET:
+ return ((struct sockaddr_in *) src)->sin_addr.s_addr !=
+ ((struct sockaddr_in *) dst)->sin_addr.s_addr;
+ default:
+ return ipv6_addr_cmp(&((struct sockaddr_in6 *) src)->sin6_addr,
+ &((struct sockaddr_in6 *) dst)->sin6_addr);
+ }
+}
+
static inline __be16 cma_port(struct sockaddr *addr)
{
if (addr->sa_family == AF_INET)
@@ -1564,50 +1580,6 @@
mutex_unlock(&lock);
}
-int rdma_listen(struct rdma_cm_id *id, int backlog)
-{
- struct rdma_id_private *id_priv;
- int ret;
-
- id_priv = container_of(id, struct rdma_id_private, id);
- if (id_priv->state == CMA_IDLE) {
- ((struct sockaddr *) &id->route.addr.src_addr)->sa_family = AF_INET;
- ret = rdma_bind_addr(id, (struct sockaddr *) &id->route.addr.src_addr);
- if (ret)
- return ret;
- }
-
- if (!cma_comp_exch(id_priv, CMA_ADDR_BOUND, CMA_LISTEN))
- return -EINVAL;
-
- id_priv->backlog = backlog;
- if (id->device) {
- switch (rdma_node_get_transport(id->device->node_type)) {
- case RDMA_TRANSPORT_IB:
- ret = cma_ib_listen(id_priv);
- if (ret)
- goto err;
- break;
- case RDMA_TRANSPORT_IWARP:
- ret = cma_iw_listen(id_priv, backlog);
- if (ret)
- goto err;
- break;
- default:
- ret = -ENOSYS;
- goto err;
- }
- } else
- cma_listen_on_all(id_priv);
-
- return 0;
-err:
- id_priv->backlog = 0;
- cma_comp_exch(id_priv, CMA_LISTEN, CMA_ADDR_BOUND);
- return ret;
-}
-EXPORT_SYMBOL(rdma_listen);
-
void rdma_set_service_type(struct rdma_cm_id *id, int tos)
{
struct rdma_id_private *id_priv;
@@ -2090,6 +2062,25 @@
}
EXPORT_SYMBOL(rdma_resolve_addr);
+int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse)
+{
+ struct rdma_id_private *id_priv;
+ unsigned long flags;
+ int ret;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ spin_lock_irqsave(&id_priv->lock, flags);
+ if (id_priv->state == CMA_IDLE) {
+ id_priv->reuseaddr = reuse;
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+ spin_unlock_irqrestore(&id_priv->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(rdma_set_reuseaddr);
+
static void cma_bind_port(struct rdma_bind_list *bind_list,
struct rdma_id_private *id_priv)
{
@@ -2165,41 +2156,71 @@
return -EADDRNOTAVAIL;
}
-static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
+/*
+ * Check that the requested port is available. This is called when trying to
+ * bind to a specific port, or when trying to listen on a bound port. In
+ * the latter case, the provided id_priv may already be on the bind_list, but
+ * we still need to check that it's okay to start listening.
+ */
+static int cma_check_port(struct rdma_bind_list *bind_list,
+ struct rdma_id_private *id_priv, uint8_t reuseaddr)
{
struct rdma_id_private *cur_id;
- struct sockaddr_in *sin, *cur_sin;
- struct rdma_bind_list *bind_list;
+ struct sockaddr *addr, *cur_addr;
struct hlist_node *node;
- unsigned short snum;
- sin = (struct sockaddr_in *) &id_priv->id.route.addr.src_addr;
- snum = ntohs(sin->sin_port);
+ addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr;
+ if (cma_any_addr(addr) && !reuseaddr)
+ return -EADDRNOTAVAIL;
+
+ hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
+ if (id_priv == cur_id)
+ continue;
+
+ if ((cur_id->state == CMA_LISTEN) ||
+ !reuseaddr || !cur_id->reuseaddr) {
+ cur_addr = (struct sockaddr *) &cur_id->id.route.addr.src_addr;
+ if (cma_any_addr(cur_addr))
+ return -EADDRNOTAVAIL;
+
+ if (!cma_addr_cmp(addr, cur_addr))
+ return -EADDRINUSE;
+ }
+ }
+ return 0;
+}
+
+static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
+{
+ struct rdma_bind_list *bind_list;
+ unsigned short snum;
+ int ret;
+
+ snum = ntohs(cma_port((struct sockaddr *) &id_priv->id.route.addr.src_addr));
if (snum < PROT_SOCK && !capable(CAP_NET_BIND_SERVICE))
return -EACCES;
bind_list = idr_find(ps, snum);
- if (!bind_list)
- return cma_alloc_port(ps, id_priv, snum);
-
- /*
- * We don't support binding to any address if anyone is bound to
- * a specific address on the same port.
- */
- if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr))
- return -EADDRNOTAVAIL;
-
- hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
- if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr))
- return -EADDRNOTAVAIL;
-
- cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr;
- if (sin->sin_addr.s_addr == cur_sin->sin_addr.s_addr)
- return -EADDRINUSE;
+ if (!bind_list) {
+ ret = cma_alloc_port(ps, id_priv, snum);
+ } else {
+ ret = cma_check_port(bind_list, id_priv, id_priv->reuseaddr);
+ if (!ret)
+ cma_bind_port(bind_list, id_priv);
}
+ return ret;
+}
- cma_bind_port(bind_list, id_priv);
- return 0;
+static int cma_bind_listen(struct rdma_id_private *id_priv)
+{
+ struct rdma_bind_list *bind_list = id_priv->bind_list;
+ int ret = 0;
+
+ mutex_lock(&lock);
+ if (bind_list->owners.first->next)
+ ret = cma_check_port(bind_list, id_priv, 0);
+ mutex_unlock(&lock);
+ return ret;
}
static int cma_get_port(struct rdma_id_private *id_priv)
@@ -2253,6 +2274,56 @@
return 0;
}
+int rdma_listen(struct rdma_cm_id *id, int backlog)
+{
+ struct rdma_id_private *id_priv;
+ int ret;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ if (id_priv->state == CMA_IDLE) {
+ ((struct sockaddr *) &id->route.addr.src_addr)->sa_family = AF_INET;
+ ret = rdma_bind_addr(id, (struct sockaddr *) &id->route.addr.src_addr);
+ if (ret)
+ return ret;
+ }
+
+ if (!cma_comp_exch(id_priv, CMA_ADDR_BOUND, CMA_LISTEN))
+ return -EINVAL;
+
+ if (id_priv->reuseaddr) {
+ ret = cma_bind_listen(id_priv);
+ if (ret)
+ goto err;
+ }
+
+ id_priv->backlog = backlog;
+ if (id->device) {
+ switch (rdma_node_get_transport(id->device->node_type)) {
+ case RDMA_TRANSPORT_IB:
+ ret = cma_ib_listen(id_priv);
+ if (ret)
+ goto err;
+ break;
+ case RDMA_TRANSPORT_IWARP:
+ ret = cma_iw_listen(id_priv, backlog);
+ if (ret)
+ goto err;
+ break;
+ default:
+ ret = -ENOSYS;
+ goto err;
+ }
+ } else
+ cma_listen_on_all(id_priv);
+
+ return 0;
+err:
+ id_priv->backlog = 0;
+ cma_comp_exch(id_priv, CMA_LISTEN, CMA_ADDR_BOUND);
+ return ret;
+}
+EXPORT_SYMBOL(rdma_listen);
+
int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr)
{
struct rdma_id_private *id_priv;
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 2a1e9ae..a9c0423 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -725,7 +725,7 @@
*/
clear_bit(IWCM_F_CONNECT_WAIT, &cm_id_priv->flags);
BUG_ON(cm_id_priv->state != IW_CM_STATE_CONN_SENT);
- if (iw_event->status == IW_CM_EVENT_STATUS_ACCEPTED) {
+ if (iw_event->status == 0) {
cm_id_priv->id.local_addr = iw_event->local_addr;
cm_id_priv->id.remote_addr = iw_event->remote_addr;
cm_id_priv->state = IW_CM_STATE_ESTABLISHED;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index ec1e9da..b3fa798 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -883,6 +883,13 @@
}
rdma_set_service_type(ctx->cm_id, *((u8 *) optval));
break;
+ case RDMA_OPTION_ID_REUSEADDR:
+ if (optlen != sizeof(int)) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = rdma_set_reuseaddr(ctx->cm_id, *((int *) optval) ? 1 : 0);
+ break;
default:
ret = -ENOSYS;
}
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 3216bca..2391841 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -338,8 +338,9 @@
__be16 peer_port, u8 tos)
{
struct rtable *rt;
+ struct flowi4 fl4;
- rt = ip_route_output_ports(&init_net, NULL, peer_ip, local_ip,
+ rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
peer_port, local_port, IPPROTO_TCP,
tos, 0);
if (IS_ERR(rt))
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 9d8dcfa..f660cd0 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -315,8 +315,9 @@
__be16 peer_port, u8 tos)
{
struct rtable *rt;
+ struct flowi4 fl4;
- rt = ip_route_output_ports(&init_net, NULL, peer_ip, local_ip,
+ rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
peer_port, local_port, IPPROTO_TCP,
tos, 0);
if (IS_ERR(rt))
@@ -1198,9 +1199,7 @@
}
PDBG("%s ep %p status %d error %d\n", __func__, ep,
rpl->status, status2errno(rpl->status));
- ep->com.wr_wait.ret = status2errno(rpl->status);
- ep->com.wr_wait.done = 1;
- wake_up(&ep->com.wr_wait.wait);
+ c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
return 0;
}
@@ -1234,9 +1233,7 @@
struct c4iw_listen_ep *ep = lookup_stid(t, stid);
PDBG("%s ep %p\n", __func__, ep);
- ep->com.wr_wait.ret = status2errno(rpl->status);
- ep->com.wr_wait.done = 1;
- wake_up(&ep->com.wr_wait.wait);
+ c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
return 0;
}
@@ -1466,7 +1463,7 @@
struct c4iw_qp_attributes attrs;
int disconnect = 1;
int release = 0;
- int closing = 0;
+ int abort = 0;
struct tid_info *t = dev->rdev.lldi.tids;
unsigned int tid = GET_TID(hdr);
@@ -1492,23 +1489,22 @@
* in rdma connection migration (see c4iw_accept_cr()).
*/
__state_set(&ep->com, CLOSING);
- ep->com.wr_wait.done = 1;
- ep->com.wr_wait.ret = -ECONNRESET;
PDBG("waking up ep %p tid %u\n", ep, ep->hwtid);
- wake_up(&ep->com.wr_wait.wait);
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
break;
case MPA_REP_SENT:
__state_set(&ep->com, CLOSING);
- ep->com.wr_wait.done = 1;
- ep->com.wr_wait.ret = -ECONNRESET;
PDBG("waking up ep %p tid %u\n", ep, ep->hwtid);
- wake_up(&ep->com.wr_wait.wait);
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
break;
case FPDU_MODE:
start_ep_timer(ep);
__state_set(&ep->com, CLOSING);
- closing = 1;
+ attrs.next_state = C4IW_QP_STATE_CLOSING;
+ abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+ C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
peer_close_upcall(ep);
+ disconnect = 1;
break;
case ABORTING:
disconnect = 0;
@@ -1536,11 +1532,6 @@
BUG_ON(1);
}
mutex_unlock(&ep->com.mutex);
- if (closing) {
- attrs.next_state = C4IW_QP_STATE_CLOSING;
- c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
- C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
- }
if (disconnect)
c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
if (release)
@@ -1581,9 +1572,7 @@
/*
* Wake up any threads in rdma_init() or rdma_fini().
*/
- ep->com.wr_wait.done = 1;
- ep->com.wr_wait.ret = -ECONNRESET;
- wake_up(&ep->com.wr_wait.wait);
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
mutex_lock(&ep->com.mutex);
switch (ep->com.state) {
@@ -1710,14 +1699,14 @@
ep = lookup_tid(t, tid);
BUG_ON(!ep);
- if (ep->com.qp) {
+ if (ep && ep->com.qp) {
printk(KERN_WARNING MOD "TERM received tid %u qpid %u\n", tid,
ep->com.qp->wq.sq.qid);
attrs.next_state = C4IW_QP_STATE_TERMINATE;
c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
} else
- printk(KERN_WARNING MOD "TERM received tid %u no qp\n", tid);
+ printk(KERN_WARNING MOD "TERM received tid %u no ep/qp\n", tid);
return 0;
}
@@ -2296,14 +2285,8 @@
ret = (int)((be64_to_cpu(rpl->data[0]) >> 8) & 0xff);
wr_waitp = (struct c4iw_wr_wait *)(__force unsigned long) rpl->data[1];
PDBG("%s wr_waitp %p ret %u\n", __func__, wr_waitp, ret);
- if (wr_waitp) {
- if (ret)
- wr_waitp->ret = -ret;
- else
- wr_waitp->ret = 0;
- wr_waitp->done = 1;
- wake_up(&wr_waitp->wait);
- }
+ if (wr_waitp)
+ c4iw_wake_up(wr_waitp, ret ? -ret : 0);
kfree_skb(skb);
break;
case 2:
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index e29172c..40a13cc 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -44,7 +44,7 @@
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
-static LIST_HEAD(dev_list);
+static LIST_HEAD(uld_ctx_list);
static DEFINE_MUTEX(dev_mutex);
static struct dentry *c4iw_debugfs_root;
@@ -370,18 +370,23 @@
c4iw_destroy_resource(&rdev->resource);
}
-static void c4iw_remove(struct c4iw_dev *dev)
+struct uld_ctx {
+ struct list_head entry;
+ struct cxgb4_lld_info lldi;
+ struct c4iw_dev *dev;
+};
+
+static void c4iw_remove(struct uld_ctx *ctx)
{
- PDBG("%s c4iw_dev %p\n", __func__, dev);
- list_del(&dev->entry);
- if (dev->registered)
- c4iw_unregister_device(dev);
- c4iw_rdev_close(&dev->rdev);
- idr_destroy(&dev->cqidr);
- idr_destroy(&dev->qpidr);
- idr_destroy(&dev->mmidr);
- iounmap(dev->rdev.oc_mw_kva);
- ib_dealloc_device(&dev->ibdev);
+ PDBG("%s c4iw_dev %p\n", __func__, ctx->dev);
+ c4iw_unregister_device(ctx->dev);
+ c4iw_rdev_close(&ctx->dev->rdev);
+ idr_destroy(&ctx->dev->cqidr);
+ idr_destroy(&ctx->dev->qpidr);
+ idr_destroy(&ctx->dev->mmidr);
+ iounmap(ctx->dev->rdev.oc_mw_kva);
+ ib_dealloc_device(&ctx->dev->ibdev);
+ ctx->dev = NULL;
}
static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
@@ -392,7 +397,7 @@
devp = (struct c4iw_dev *)ib_alloc_device(sizeof(*devp));
if (!devp) {
printk(KERN_ERR MOD "Cannot allocate ib device\n");
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
devp->rdev.lldi = *infop;
@@ -402,27 +407,23 @@
devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
devp->rdev.lldi.vr->ocq.size);
- printk(KERN_INFO MOD "ocq memory: "
+ PDBG(KERN_INFO MOD "ocq memory: "
"hw_start 0x%x size %u mw_pa 0x%lx mw_kva %p\n",
devp->rdev.lldi.vr->ocq.start, devp->rdev.lldi.vr->ocq.size,
devp->rdev.oc_mw_pa, devp->rdev.oc_mw_kva);
- mutex_lock(&dev_mutex);
-
ret = c4iw_rdev_open(&devp->rdev);
if (ret) {
mutex_unlock(&dev_mutex);
printk(KERN_ERR MOD "Unable to open CXIO rdev err %d\n", ret);
ib_dealloc_device(&devp->ibdev);
- return NULL;
+ return ERR_PTR(ret);
}
idr_init(&devp->cqidr);
idr_init(&devp->qpidr);
idr_init(&devp->mmidr);
spin_lock_init(&devp->lock);
- list_add_tail(&devp->entry, &dev_list);
- mutex_unlock(&dev_mutex);
if (c4iw_debugfs_root) {
devp->debugfs_root = debugfs_create_dir(
@@ -435,7 +436,7 @@
static void *c4iw_uld_add(const struct cxgb4_lld_info *infop)
{
- struct c4iw_dev *dev;
+ struct uld_ctx *ctx;
static int vers_printed;
int i;
@@ -443,25 +444,33 @@
printk(KERN_INFO MOD "Chelsio T4 RDMA Driver - version %s\n",
DRV_VERSION);
- dev = c4iw_alloc(infop);
- if (!dev)
+ ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+ if (!ctx) {
+ ctx = ERR_PTR(-ENOMEM);
goto out;
+ }
+ ctx->lldi = *infop;
PDBG("%s found device %s nchan %u nrxq %u ntxq %u nports %u\n",
- __func__, pci_name(dev->rdev.lldi.pdev),
- dev->rdev.lldi.nchan, dev->rdev.lldi.nrxq,
- dev->rdev.lldi.ntxq, dev->rdev.lldi.nports);
+ __func__, pci_name(ctx->lldi.pdev),
+ ctx->lldi.nchan, ctx->lldi.nrxq,
+ ctx->lldi.ntxq, ctx->lldi.nports);
- for (i = 0; i < dev->rdev.lldi.nrxq; i++)
- PDBG("rxqid[%u] %u\n", i, dev->rdev.lldi.rxq_ids[i]);
+ mutex_lock(&dev_mutex);
+ list_add_tail(&ctx->entry, &uld_ctx_list);
+ mutex_unlock(&dev_mutex);
+
+ for (i = 0; i < ctx->lldi.nrxq; i++)
+ PDBG("rxqid[%u] %u\n", i, ctx->lldi.rxq_ids[i]);
out:
- return dev;
+ return ctx;
}
static int c4iw_uld_rx_handler(void *handle, const __be64 *rsp,
const struct pkt_gl *gl)
{
- struct c4iw_dev *dev = handle;
+ struct uld_ctx *ctx = handle;
+ struct c4iw_dev *dev = ctx->dev;
struct sk_buff *skb;
const struct cpl_act_establish *rpl;
unsigned int opcode;
@@ -503,47 +512,49 @@
static int c4iw_uld_state_change(void *handle, enum cxgb4_state new_state)
{
- struct c4iw_dev *dev = handle;
+ struct uld_ctx *ctx = handle;
PDBG("%s new_state %u\n", __func__, new_state);
switch (new_state) {
case CXGB4_STATE_UP:
- printk(KERN_INFO MOD "%s: Up\n", pci_name(dev->rdev.lldi.pdev));
- if (!dev->registered) {
- int ret;
- ret = c4iw_register_device(dev);
- if (ret)
+ printk(KERN_INFO MOD "%s: Up\n", pci_name(ctx->lldi.pdev));
+ if (!ctx->dev) {
+ int ret = 0;
+
+ ctx->dev = c4iw_alloc(&ctx->lldi);
+ if (!IS_ERR(ctx->dev))
+ ret = c4iw_register_device(ctx->dev);
+ if (IS_ERR(ctx->dev) || ret)
printk(KERN_ERR MOD
"%s: RDMA registration failed: %d\n",
- pci_name(dev->rdev.lldi.pdev), ret);
+ pci_name(ctx->lldi.pdev), ret);
}
break;
case CXGB4_STATE_DOWN:
printk(KERN_INFO MOD "%s: Down\n",
- pci_name(dev->rdev.lldi.pdev));
- if (dev->registered)
- c4iw_unregister_device(dev);
+ pci_name(ctx->lldi.pdev));
+ if (ctx->dev)
+ c4iw_remove(ctx);
break;
case CXGB4_STATE_START_RECOVERY:
printk(KERN_INFO MOD "%s: Fatal Error\n",
- pci_name(dev->rdev.lldi.pdev));
- dev->rdev.flags |= T4_FATAL_ERROR;
- if (dev->registered) {
+ pci_name(ctx->lldi.pdev));
+ if (ctx->dev) {
struct ib_event event;
+ ctx->dev->rdev.flags |= T4_FATAL_ERROR;
memset(&event, 0, sizeof event);
event.event = IB_EVENT_DEVICE_FATAL;
- event.device = &dev->ibdev;
+ event.device = &ctx->dev->ibdev;
ib_dispatch_event(&event);
- c4iw_unregister_device(dev);
+ c4iw_remove(ctx);
}
break;
case CXGB4_STATE_DETACH:
printk(KERN_INFO MOD "%s: Detach\n",
- pci_name(dev->rdev.lldi.pdev));
- mutex_lock(&dev_mutex);
- c4iw_remove(dev);
- mutex_unlock(&dev_mutex);
+ pci_name(ctx->lldi.pdev));
+ if (ctx->dev)
+ c4iw_remove(ctx);
break;
}
return 0;
@@ -576,11 +587,13 @@
static void __exit c4iw_exit_module(void)
{
- struct c4iw_dev *dev, *tmp;
+ struct uld_ctx *ctx, *tmp;
mutex_lock(&dev_mutex);
- list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
- c4iw_remove(dev);
+ list_for_each_entry_safe(ctx, tmp, &uld_ctx_list, entry) {
+ if (ctx->dev)
+ c4iw_remove(ctx);
+ kfree(ctx);
}
mutex_unlock(&dev_mutex);
cxgb4_unregister_uld(CXGB4_ULD_RDMA);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 9f6166f..35d2a5d 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -131,42 +131,58 @@
#define C4IW_WR_TO (10*HZ)
+enum {
+ REPLY_READY = 0,
+};
+
struct c4iw_wr_wait {
wait_queue_head_t wait;
- int done;
+ unsigned long status;
int ret;
};
static inline void c4iw_init_wr_wait(struct c4iw_wr_wait *wr_waitp)
{
wr_waitp->ret = 0;
- wr_waitp->done = 0;
+ wr_waitp->status = 0;
init_waitqueue_head(&wr_waitp->wait);
}
+static inline void c4iw_wake_up(struct c4iw_wr_wait *wr_waitp, int ret)
+{
+ wr_waitp->ret = ret;
+ set_bit(REPLY_READY, &wr_waitp->status);
+ wake_up(&wr_waitp->wait);
+}
+
static inline int c4iw_wait_for_reply(struct c4iw_rdev *rdev,
struct c4iw_wr_wait *wr_waitp,
u32 hwtid, u32 qpid,
const char *func)
{
unsigned to = C4IW_WR_TO;
- do {
+ int ret;
- wait_event_timeout(wr_waitp->wait, wr_waitp->done, to);
- if (!wr_waitp->done) {
+ do {
+ ret = wait_event_timeout(wr_waitp->wait,
+ test_and_clear_bit(REPLY_READY, &wr_waitp->status), to);
+ if (!ret) {
printk(KERN_ERR MOD "%s - Device %s not responding - "
"tid %u qpid %u\n", func,
pci_name(rdev->lldi.pdev), hwtid, qpid);
+ if (c4iw_fatal_error(rdev)) {
+ wr_waitp->ret = -EIO;
+ break;
+ }
to = to << 2;
}
- } while (!wr_waitp->done);
+ } while (!ret);
if (wr_waitp->ret)
- printk(KERN_WARNING MOD "%s: FW reply %d tid %u qpid %u\n",
- pci_name(rdev->lldi.pdev), wr_waitp->ret, hwtid, qpid);
+ PDBG("%s: FW reply %d tid %u qpid %u\n",
+ pci_name(rdev->lldi.pdev), wr_waitp->ret, hwtid, qpid);
return wr_waitp->ret;
}
-
struct c4iw_dev {
struct ib_device ibdev;
struct c4iw_rdev rdev;
@@ -175,9 +191,7 @@
struct idr qpidr;
struct idr mmidr;
spinlock_t lock;
- struct list_head entry;
struct dentry *debugfs_root;
- u8 registered;
};
static inline struct c4iw_dev *to_c4iw_dev(struct ib_device *ibdev)
diff --git a/drivers/infiniband/hw/cxgb4/provider.c b/drivers/infiniband/hw/cxgb4/provider.c
index f66dd8b..5b9e422 100644
--- a/drivers/infiniband/hw/cxgb4/provider.c
+++ b/drivers/infiniband/hw/cxgb4/provider.c
@@ -516,7 +516,6 @@
if (ret)
goto bail2;
}
- dev->registered = 1;
return 0;
bail2:
ib_unregister_device(&dev->ibdev);
@@ -535,6 +534,5 @@
c4iw_class_attributes[i]);
ib_unregister_device(&dev->ibdev);
kfree(dev->ibdev.iwcm);
- dev->registered = 0;
return;
}
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 70a5a3c..3b773b0 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -214,7 +214,7 @@
V_FW_RI_RES_WR_HOSTFCMODE(0) | /* no host cidx updates */
V_FW_RI_RES_WR_CPRIO(0) | /* don't keep in chip cache */
V_FW_RI_RES_WR_PCIECHN(0) | /* set by uP at ri_init time */
- t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0 |
+ (t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0) |
V_FW_RI_RES_WR_IQID(scq->cqid));
res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
V_FW_RI_RES_WR_DCAEN(0) |
@@ -1210,7 +1210,6 @@
if (ret) {
if (internal)
c4iw_get_ep(&qhp->ep->com);
- disconnect = abort = 1;
goto err;
}
break;
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 24af12f..c0221ee 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -269,11 +269,8 @@
static inline pgprot_t t4_pgprot_wc(pgprot_t prot)
{
-#if defined(__i386__) || defined(__x86_64__)
+#if defined(__i386__) || defined(__x86_64__) || defined(CONFIG_PPC64)
return pgprot_writecombine(prot);
-#elif defined(CONFIG_PPC64)
- return __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE) &
- ~(pgprot_t)_PAGE_GUARDED);
#else
return pgprot_noncached(prot);
#endif
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 58c0e41..be24ac7 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -398,7 +398,6 @@
struct ipath_devdata *dd;
unsigned long long addr;
u32 bar0 = 0, bar1 = 0;
- u8 rev;
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
@@ -540,13 +539,7 @@
goto bail_regions;
}
- ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- if (ret) {
- ipath_dev_err(dd, "Failed to read PCI revision ID unit "
- "%u: err %d\n", dd->ipath_unit, -ret);
- goto bail_regions; /* shouldn't ever happen */
- }
- dd->ipath_pcirev = rev;
+ dd->ipath_pcirev = pdev->revision;
#if defined(__powerpc__)
/* There isn't a generic way to specify writethrough mappings */
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 33c7eed..e74cdf9 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2563,7 +2563,7 @@
u16 last_ae;
u8 original_hw_tcp_state;
u8 original_ibqp_state;
- enum iw_cm_event_status disconn_status = IW_CM_EVENT_STATUS_OK;
+ int disconn_status = 0;
int issue_disconn = 0;
int issue_close = 0;
int issue_flush = 0;
@@ -2605,7 +2605,7 @@
(last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
issue_disconn = 1;
if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET)
- disconn_status = IW_CM_EVENT_STATUS_RESET;
+ disconn_status = -ECONNRESET;
}
if (((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
@@ -2666,7 +2666,7 @@
cm_id->provider_data = nesqp;
/* Send up the close complete event */
cm_event.event = IW_CM_EVENT_CLOSE;
- cm_event.status = IW_CM_EVENT_STATUS_OK;
+ cm_event.status = 0;
cm_event.provider_data = cm_id->provider_data;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
@@ -2966,7 +2966,7 @@
nes_add_ref(&nesqp->ibqp);
cm_event.event = IW_CM_EVENT_ESTABLISHED;
- cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
+ cm_event.status = 0;
cm_event.provider_data = (void *)nesqp;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
@@ -3377,7 +3377,7 @@
/* notify OF layer we successfully created the requested connection */
cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
- cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
+ cm_event.status = 0;
cm_event.provider_data = cm_id->provider_data;
cm_event.local_addr.sin_family = AF_INET;
cm_event.local_addr.sin_port = cm_id->local_addr.sin_port;
@@ -3484,7 +3484,7 @@
nesqp->cm_id = NULL;
/* cm_id->provider_data = NULL; */
cm_event.event = IW_CM_EVENT_DISCONNECT;
- cm_event.status = IW_CM_EVENT_STATUS_RESET;
+ cm_event.status = -ECONNRESET;
cm_event.provider_data = cm_id->provider_data;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
@@ -3495,7 +3495,7 @@
ret = cm_id->event_handler(cm_id, &cm_event);
atomic_inc(&cm_closes);
cm_event.event = IW_CM_EVENT_CLOSE;
- cm_event.status = IW_CM_EVENT_STATUS_OK;
+ cm_event.status = 0;
cm_event.provider_data = cm_id->provider_data;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
@@ -3534,7 +3534,7 @@
cm_node, cm_id, jiffies);
cm_event.event = IW_CM_EVENT_CONNECT_REQUEST;
- cm_event.status = IW_CM_EVENT_STATUS_OK;
+ cm_event.status = 0;
cm_event.provider_data = (void *)cm_node;
cm_event.local_addr.sin_family = AF_INET;
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 10d0a5e..96fa9a4 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -2885,9 +2885,8 @@
if ((cqe_errv &
(NES_NIC_ERRV_BITS_IPV4_CSUM_ERR | NES_NIC_ERRV_BITS_TCPUDP_CSUM_ERR |
NES_NIC_ERRV_BITS_IPH_ERR | NES_NIC_ERRV_BITS_WQE_OVERRUN)) == 0) {
- if (nesvnic->rx_checksum_disabled == 0) {
+ if (nesvnic->netdev->features & NETIF_F_RXCSUM)
rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
- }
} else
nes_debug(NES_DBG_CQ, "%s: unsuccessfully checksummed TCP or UDP packet."
" errv = 0x%X, pkt_type = 0x%X.\n",
@@ -2897,7 +2896,7 @@
if ((cqe_errv &
(NES_NIC_ERRV_BITS_IPV4_CSUM_ERR | NES_NIC_ERRV_BITS_IPH_ERR |
NES_NIC_ERRV_BITS_WQE_OVERRUN)) == 0) {
- if (nesvnic->rx_checksum_disabled == 0) {
+ if (nesvnic->netdev->features & NETIF_F_RXCSUM) {
rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
/* nes_debug(NES_DBG_CQ, "%s: Reporting successfully checksummed IPv4 packet.\n",
nesvnic->netdev->name); */
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index d2abe07..9159411 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -1245,7 +1245,6 @@
u8 next_qp_nic_index;
u8 of_device_registered;
u8 rdma_enabled;
- u8 rx_checksum_disabled;
u32 lro_max_aggr;
struct net_lro_mgr lro_mgr;
struct net_lro_desc lro_desc[NES_MAX_LRO_DESCRIPTORS];
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index e96b8fb..d3a1c41 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1093,34 +1093,6 @@
};
#define NES_ETHTOOL_STAT_COUNT ARRAY_SIZE(nes_ethtool_stringset)
-/**
- * nes_netdev_get_rx_csum
- */
-static u32 nes_netdev_get_rx_csum (struct net_device *netdev)
-{
- struct nes_vnic *nesvnic = netdev_priv(netdev);
-
- if (nesvnic->rx_checksum_disabled)
- return 0;
- else
- return 1;
-}
-
-
-/**
- * nes_netdev_set_rc_csum
- */
-static int nes_netdev_set_rx_csum(struct net_device *netdev, u32 enable)
-{
- struct nes_vnic *nesvnic = netdev_priv(netdev);
-
- if (enable)
- nesvnic->rx_checksum_disabled = 0;
- else
- nesvnic->rx_checksum_disabled = 1;
- return 0;
-}
-
/**
* nes_netdev_get_sset_count
@@ -1521,7 +1493,7 @@
et_cmd->maxrxpkt = 511;
if (nesadapter->OneG_Mode) {
- et_cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(et_cmd, SPEED_1000);
if (phy_type == NES_PHY_TYPE_PUMA_1G) {
et_cmd->supported = SUPPORTED_1000baseT_Full;
et_cmd->advertising = ADVERTISED_1000baseT_Full;
@@ -1560,7 +1532,7 @@
et_cmd->advertising = ADVERTISED_10000baseT_Full;
et_cmd->phy_address = mac_index;
}
- et_cmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(et_cmd, SPEED_10000);
et_cmd->autoneg = AUTONEG_DISABLE;
return 0;
}
@@ -1598,19 +1570,10 @@
}
-static int nes_netdev_set_flags(struct net_device *netdev, u32 flags)
-{
- return ethtool_op_set_flags(netdev, flags, ETH_FLAG_LRO);
-}
-
-
static const struct ethtool_ops nes_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_settings = nes_netdev_get_settings,
.set_settings = nes_netdev_set_settings,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .get_rx_csum = nes_netdev_get_rx_csum,
- .get_sg = ethtool_op_get_sg,
.get_strings = nes_netdev_get_strings,
.get_sset_count = nes_netdev_get_sset_count,
.get_ethtool_stats = nes_netdev_get_ethtool_stats,
@@ -1619,13 +1582,6 @@
.set_coalesce = nes_netdev_set_coalesce,
.get_pauseparam = nes_netdev_get_pauseparam,
.set_pauseparam = nes_netdev_set_pauseparam,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_rx_csum = nes_netdev_set_rx_csum,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ethtool_op_set_tso,
- .get_flags = ethtool_op_get_flags,
- .set_flags = nes_netdev_set_flags,
};
@@ -1727,12 +1683,11 @@
netdev->dev_addr[5] = (u8)u64temp;
memcpy(netdev->perm_addr, netdev->dev_addr, 6);
- if ((nesvnic->logical_port < 2) || (nesdev->nesadapter->hw_rev != NE020_REV)) {
- netdev->features |= NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM;
- netdev->features |= NETIF_F_GSO | NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM;
- } else {
- netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
+ netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_IP_CSUM;
+ if ((nesvnic->logical_port < 2) || (nesdev->nesadapter->hw_rev != NE020_REV))
+ netdev->hw_features |= NETIF_F_TSO;
+ netdev->features |= netdev->hw_features;
+ netdev->hw_features |= NETIF_F_LRO;
nes_debug(NES_DBG_INIT, "nesvnic = %p, reported features = 0x%lX, QPid = %d,"
" nic_index = %d, logical_port = %d, mac_index = %d.\n",
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 26d8018..95ca93c 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1484,7 +1484,7 @@
(nesqp->ibqp_state == IB_QPS_RTR)) && (nesqp->cm_id)) {
cm_id = nesqp->cm_id;
cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
- cm_event.status = IW_CM_EVENT_STATUS_TIMEOUT;
+ cm_event.status = -ETIMEDOUT;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
cm_event.private_data = NULL;
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 6bab3ea..9f53e68 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -7534,7 +7534,8 @@
ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10));
tstart = get_jiffies_64();
while (chan_done &&
- !time_after64(tstart, tstart + msecs_to_jiffies(500))) {
+ !time_after64(get_jiffies_64(),
+ tstart + msecs_to_jiffies(500))) {
msleep(20);
for (chan = 0; chan < SERDES_CHANS; ++chan) {
rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 48b6674..891cc2f 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -526,11 +526,8 @@
*/
devid = parent->device;
if (devid >= 0x25e2 && devid <= 0x25fa) {
- u8 rev;
-
/* 5000 P/V/X/Z */
- pci_read_config_byte(parent, PCI_REVISION_ID, &rev);
- if (rev <= 0xb2)
+ if (parent->revision <= 0xb2)
bits = 1U << 10;
else
bits = 7U << 10;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index ab97f92..7b6985a 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -91,7 +91,6 @@
IPOIB_STOP_REAPER = 7,
IPOIB_FLAG_ADMIN_CM = 9,
IPOIB_FLAG_UMCAST = 10,
- IPOIB_FLAG_CSUM = 11,
IPOIB_MAX_BACKOFF_SECONDS = 16,
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 93d5580..39913a0 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1463,8 +1463,7 @@
set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
ipoib_warn(priv, "enabling connected mode "
"will cause multicast packet drops\n");
-
- dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
+ netdev_update_features(dev);
rtnl_unlock();
priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
@@ -1474,13 +1473,7 @@
if (!strcmp(buf, "datagram\n")) {
clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
-
- if (test_bit(IPOIB_FLAG_CSUM, &priv->flags)) {
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- priv->dev->features |= NETIF_F_GRO;
- if (priv->hca_caps & IB_DEVICE_UD_TSO)
- dev->features |= NETIF_F_TSO;
- }
+ netdev_update_features(dev);
dev_set_mtu(dev, min(priv->mcast_mtu, dev->mtu));
rtnl_unlock();
ipoib_flush_paths(dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
index 19f7f52..29bc7b5 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
@@ -42,32 +42,6 @@
strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1);
}
-static u32 ipoib_get_rx_csum(struct net_device *dev)
-{
- struct ipoib_dev_priv *priv = netdev_priv(dev);
- return test_bit(IPOIB_FLAG_CSUM, &priv->flags) &&
- !test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
-}
-
-static int ipoib_set_tso(struct net_device *dev, u32 data)
-{
- struct ipoib_dev_priv *priv = netdev_priv(dev);
-
- if (data) {
- if (!test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags) &&
- (dev->features & NETIF_F_SG) &&
- (priv->hca_caps & IB_DEVICE_UD_TSO)) {
- dev->features |= NETIF_F_TSO;
- } else {
- ipoib_warn(priv, "can't set TSO on\n");
- return -EOPNOTSUPP;
- }
- } else
- dev->features &= ~NETIF_F_TSO;
-
- return 0;
-}
-
static int ipoib_get_coalesce(struct net_device *dev,
struct ethtool_coalesce *coal)
{
@@ -108,8 +82,6 @@
static const struct ethtool_ops ipoib_ethtool_ops = {
.get_drvinfo = ipoib_get_drvinfo,
- .get_rx_csum = ipoib_get_rx_csum,
- .set_tso = ipoib_set_tso,
.get_coalesce = ipoib_get_coalesce,
.set_coalesce = ipoib_set_coalesce,
};
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 806d029..81ae61d 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -292,7 +292,7 @@
dev->stats.rx_bytes += skb->len;
skb->dev = dev;
- if (test_bit(IPOIB_FLAG_CSUM, &priv->flags) && likely(wc->csum_ok))
+ if ((dev->features & NETIF_F_RXCSUM) && likely(wc->csum_ok))
skb->ip_summed = CHECKSUM_UNNECESSARY;
napi_gro_receive(&priv->napi, skb);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index aca3b44..86addca 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -171,6 +171,16 @@
return 0;
}
+static u32 ipoib_fix_features(struct net_device *dev, u32 features)
+{
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+
+ if (test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags))
+ features &= ~(NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
+ return features;
+}
+
static int ipoib_change_mtu(struct net_device *dev, int new_mtu)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -970,6 +980,7 @@
.ndo_open = ipoib_open,
.ndo_stop = ipoib_stop,
.ndo_change_mtu = ipoib_change_mtu,
+ .ndo_fix_features = ipoib_fix_features,
.ndo_start_xmit = ipoib_start_xmit,
.ndo_tx_timeout = ipoib_timeout,
.ndo_set_multicast_list = ipoib_set_mcast_list,
@@ -1154,19 +1165,18 @@
kfree(device_attr);
if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) {
- set_bit(IPOIB_FLAG_CSUM, &priv->flags);
- priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ priv->dev->hw_features = NETIF_F_SG |
+ NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
+ if (priv->hca_caps & IB_DEVICE_UD_TSO)
+ priv->dev->hw_features |= NETIF_F_TSO;
+
+ priv->dev->features |= priv->dev->hw_features;
}
- priv->dev->features |= NETIF_F_GRO;
-
- if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO)
- priv->dev->features |= NETIF_F_TSO;
-
return 0;
}
-
static struct net_device *ipoib_add_port(const char *format,
struct ib_device *hca, u8 port)
{
diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c
index 1839194..10bcd4a 100644
--- a/drivers/input/keyboard/atakbd.c
+++ b/drivers/input/keyboard/atakbd.c
@@ -223,8 +223,9 @@
return -ENODEV;
// need to init core driver if not already done so
- if (atari_keyb_init())
- return -ENODEV;
+ error = atari_keyb_init();
+ if (error)
+ return error;
atakbd_dev = input_allocate_device();
if (!atakbd_dev)
diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
index adf45b3..5c4a692 100644
--- a/drivers/input/mouse/atarimouse.c
+++ b/drivers/input/mouse/atarimouse.c
@@ -77,15 +77,15 @@
#endif
/* only relative events get here */
- dx = buf[1];
- dy = -buf[2];
+ dx = buf[1];
+ dy = buf[2];
input_report_rel(atamouse_dev, REL_X, dx);
input_report_rel(atamouse_dev, REL_Y, dy);
- input_report_key(atamouse_dev, BTN_LEFT, buttons & 0x1);
+ input_report_key(atamouse_dev, BTN_LEFT, buttons & 0x4);
input_report_key(atamouse_dev, BTN_MIDDLE, buttons & 0x2);
- input_report_key(atamouse_dev, BTN_RIGHT, buttons & 0x4);
+ input_report_key(atamouse_dev, BTN_RIGHT, buttons & 0x1);
input_sync(atamouse_dev);
@@ -108,7 +108,7 @@
static void atamouse_close(struct input_dev *dev)
{
ikbd_mouse_disable();
- atari_mouse_interrupt_hook = NULL;
+ atari_input_mouse_interrupt_hook = NULL;
}
static int __init atamouse_init(void)
@@ -118,8 +118,9 @@
if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
return -ENODEV;
- if (!atari_keyb_init())
- return -ENODEV;
+ error = atari_keyb_init();
+ if (error)
+ return error;
atamouse_dev = input_allocate_device();
if (!atamouse_dev)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index c24946f..1de1c19 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -281,17 +281,24 @@
u8 command;
u8 ref_off;
u16 scratch;
- __be16 sample;
struct spi_message msg;
struct spi_transfer xfer[6];
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ __be16 sample ____cacheline_aligned;
};
struct ads7845_ser_req {
u8 command[3];
- u8 pwrdown[3];
- u8 sample[3];
struct spi_message msg;
struct spi_transfer xfer[2];
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ u8 sample[3] ____cacheline_aligned;
};
static int ads7846_read12_ser(struct device *dev, unsigned command)
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
index 6ae054f..9175d49 100644
--- a/drivers/input/touchscreen/wm831x-ts.c
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -68,8 +68,23 @@
unsigned int pd_irq;
bool pressure;
bool pen_down;
+ struct work_struct pd_data_work;
};
+static void wm831x_pd_data_work(struct work_struct *work)
+{
+ struct wm831x_ts *wm831x_ts =
+ container_of(work, struct wm831x_ts, pd_data_work);
+
+ if (wm831x_ts->pen_down) {
+ enable_irq(wm831x_ts->data_irq);
+ dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n");
+ } else {
+ enable_irq(wm831x_ts->pd_irq);
+ dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n");
+ }
+}
+
static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
{
struct wm831x_ts *wm831x_ts = irq_data;
@@ -110,6 +125,9 @@
}
if (!wm831x_ts->pen_down) {
+ /* Switch from data to pen down */
+ dev_dbg(wm831x->dev, "IRQ DATA->PD\n");
+
disable_irq_nosync(wm831x_ts->data_irq);
/* Don't need data any more */
@@ -128,6 +146,10 @@
ABS_PRESSURE, 0);
input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0);
+
+ schedule_work(&wm831x_ts->pd_data_work);
+ } else {
+ input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
}
input_sync(wm831x_ts->input_dev);
@@ -141,6 +163,11 @@
struct wm831x *wm831x = wm831x_ts->wm831x;
int ena = 0;
+ if (wm831x_ts->pen_down)
+ return IRQ_HANDLED;
+
+ disable_irq_nosync(wm831x_ts->pd_irq);
+
/* Start collecting data */
if (wm831x_ts->pressure)
ena |= WM831X_TCH_Z_ENA;
@@ -149,14 +176,14 @@
WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA,
WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena);
- input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
- input_sync(wm831x_ts->input_dev);
-
wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
WM831X_TCHPD_EINT, WM831X_TCHPD_EINT);
wm831x_ts->pen_down = true;
- enable_irq(wm831x_ts->data_irq);
+
+ /* Switch from pen down to data */
+ dev_dbg(wm831x->dev, "IRQ PD->DATA\n");
+ schedule_work(&wm831x_ts->pd_data_work);
return IRQ_HANDLED;
}
@@ -182,13 +209,28 @@
struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
struct wm831x *wm831x = wm831x_ts->wm831x;
+ /* Shut the controller down, disabling all other functionality too */
wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
- WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
- WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
- WM831X_TCH_Z_ENA, 0);
+ WM831X_TCH_ENA | WM831X_TCH_X_ENA |
+ WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0);
- if (wm831x_ts->pen_down)
+ /* Make sure any pending IRQs are done, the above will prevent
+ * new ones firing.
+ */
+ synchronize_irq(wm831x_ts->data_irq);
+ synchronize_irq(wm831x_ts->pd_irq);
+
+ /* Make sure the IRQ completion work is quiesced */
+ flush_work_sync(&wm831x_ts->pd_data_work);
+
+ /* If we ended up with the pen down then make sure we revert back
+ * to pen detection state for the next time we start up.
+ */
+ if (wm831x_ts->pen_down) {
disable_irq(wm831x_ts->data_irq);
+ enable_irq(wm831x_ts->pd_irq);
+ wm831x_ts->pen_down = false;
+ }
}
static __devinit int wm831x_ts_probe(struct platform_device *pdev)
@@ -198,7 +240,7 @@
struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent);
struct wm831x_touch_pdata *pdata = NULL;
struct input_dev *input_dev;
- int error;
+ int error, irqf;
if (core_pdata)
pdata = core_pdata->touch;
@@ -212,6 +254,7 @@
wm831x_ts->wm831x = wm831x;
wm831x_ts->input_dev = input_dev;
+ INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work);
/*
* If we have a direct IRQ use it, otherwise use the interrupt
@@ -270,9 +313,14 @@
wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
WM831X_TCH_RATE_MASK, 6);
+ if (pdata && pdata->data_irqf)
+ irqf = pdata->data_irqf;
+ else
+ irqf = IRQF_TRIGGER_HIGH;
+
error = request_threaded_irq(wm831x_ts->data_irq,
NULL, wm831x_ts_data_irq,
- IRQF_ONESHOT,
+ irqf | IRQF_ONESHOT,
"Touchscreen data", wm831x_ts);
if (error) {
dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
@@ -281,9 +329,14 @@
}
disable_irq(wm831x_ts->data_irq);
+ if (pdata && pdata->pd_irqf)
+ irqf = pdata->pd_irqf;
+ else
+ irqf = IRQF_TRIGGER_HIGH;
+
error = request_threaded_irq(wm831x_ts->pd_irq,
NULL, wm831x_ts_pen_down_irq,
- IRQF_ONESHOT,
+ irqf | IRQF_ONESHOT,
"Touchscreen pen down", wm831x_ts);
if (error) {
dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n",
diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index a168e8a..15c3ffd 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -33,21 +33,6 @@
standardized libcapi20 to access this functionality. You should say
Y/M here.
-config ISDN_CAPI_CAPIFS_BOOL
- bool "CAPI2.0 filesystem support (DEPRECATED)"
- depends on ISDN_CAPI_MIDDLEWARE && ISDN_CAPI_CAPI20
- help
- This option provides a special file system, similar to /dev/pts with
- device nodes for the special ttys established by using the
- middleware extension above.
- You no longer need this, udev fully replaces it. This feature is
- scheduled for removal.
-
-config ISDN_CAPI_CAPIFS
- tristate
- depends on ISDN_CAPI_CAPIFS_BOOL
- default ISDN_CAPI_CAPI20
-
config ISDN_CAPI_CAPIDRV
tristate "CAPI2.0 capidrv interface support"
depends on ISDN_I4L
diff --git a/drivers/isdn/capi/Makefile b/drivers/isdn/capi/Makefile
index 57123e3..4d5b4b7 100644
--- a/drivers/isdn/capi/Makefile
+++ b/drivers/isdn/capi/Makefile
@@ -7,7 +7,6 @@
obj-$(CONFIG_ISDN_CAPI) += kernelcapi.o
obj-$(CONFIG_ISDN_CAPI_CAPI20) += capi.o
obj-$(CONFIG_ISDN_CAPI_CAPIDRV) += capidrv.o
-obj-$(CONFIG_ISDN_CAPI_CAPIFS) += capifs.o
# Multipart objects.
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 0d70883..e44933d 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -38,15 +38,10 @@
#include <linux/isdn/capiutil.h>
#include <linux/isdn/capicmd.h>
-#include "capifs.h"
-
MODULE_DESCRIPTION("CAPI4Linux: Userspace /dev/capi20 interface");
MODULE_AUTHOR("Carsten Paeth");
MODULE_LICENSE("GPL");
-#undef _DEBUG_TTYFUNCS /* call to tty_driver */
-#undef _DEBUG_DATAFLOW /* data flow */
-
/* -------- driver information -------------------------------------- */
static DEFINE_MUTEX(capi_mutex);
@@ -85,7 +80,6 @@
struct kref kref;
unsigned int minor;
- struct dentry *capifs_dentry;
struct capi20_appl *ap;
u32 ncci;
@@ -300,17 +294,8 @@
static void capincci_alloc_minor(struct capidev *cdev, struct capincci *np)
{
- struct capiminor *mp;
- dev_t device;
-
- if (!(cdev->userflags & CAPIFLAG_HIGHJACKING))
- return;
-
- mp = np->minorp = capiminor_alloc(&cdev->ap, np->ncci);
- if (mp) {
- device = MKDEV(capinc_tty_driver->major, mp->minor);
- mp->capifs_dentry = capifs_new_ncci(mp->minor, device);
- }
+ if (cdev->userflags & CAPIFLAG_HIGHJACKING)
+ np->minorp = capiminor_alloc(&cdev->ap, np->ncci);
}
static void capincci_free_minor(struct capincci *np)
@@ -319,8 +304,6 @@
struct tty_struct *tty;
if (mp) {
- capifs_free_ncci(mp->capifs_dentry);
-
tty = tty_port_tty_get(&mp->port);
if (tty) {
tty_vhangup(tty);
@@ -432,9 +415,7 @@
tty = tty_port_tty_get(&mp->port);
if (!tty) {
-#ifdef _DEBUG_DATAFLOW
- printk(KERN_DEBUG "capi: currently no receiver\n");
-#endif
+ pr_debug("capi: currently no receiver\n");
return -1;
}
@@ -447,23 +428,17 @@
}
if (ld->ops->receive_buf == NULL) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
- printk(KERN_DEBUG "capi: ldisc has no receive_buf function\n");
-#endif
+ pr_debug("capi: ldisc has no receive_buf function\n");
/* fatal error, do not requeue */
goto free_skb;
}
if (mp->ttyinstop) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
- printk(KERN_DEBUG "capi: recv tty throttled\n");
-#endif
+ pr_debug("capi: recv tty throttled\n");
goto deref_ldisc;
}
if (tty->receive_room < datalen) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
- printk(KERN_DEBUG "capi: no room in tty\n");
-#endif
+ pr_debug("capi: no room in tty\n");
goto deref_ldisc;
}
@@ -479,10 +454,8 @@
if (errcode == CAPI_NOERROR) {
skb_pull(skb, CAPIMSG_LEN(skb->data));
-#ifdef _DEBUG_DATAFLOW
- printk(KERN_DEBUG "capi: DATA_B3_RESP %u len=%d => ldisc\n",
- datahandle, skb->len);
-#endif
+ pr_debug("capi: DATA_B3_RESP %u len=%d => ldisc\n",
+ datahandle, skb->len);
ld->ops->receive_buf(tty, skb->data, NULL, skb->len);
} else {
printk(KERN_ERR "capi: send DATA_B3_RESP failed=%x\n",
@@ -529,9 +502,7 @@
return;
if (mp->ttyoutstop) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
- printk(KERN_DEBUG "capi: send: tty stopped\n");
-#endif
+ pr_debug("capi: send: tty stopped\n");
tty_kref_put(tty);
return;
}
@@ -573,10 +544,8 @@
}
errcode = capi20_put_message(mp->ap, skb);
if (errcode == CAPI_NOERROR) {
-#ifdef _DEBUG_DATAFLOW
- printk(KERN_DEBUG "capi: DATA_B3_REQ %u len=%u\n",
- datahandle, len);
-#endif
+ pr_debug("capi: DATA_B3_REQ %u len=%u\n",
+ datahandle, len);
continue;
}
capiminor_del_ack(mp, datahandle);
@@ -650,10 +619,8 @@
}
if (CAPIMSG_SUBCOMMAND(skb->data) == CAPI_IND) {
datahandle = CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4+4+2);
-#ifdef _DEBUG_DATAFLOW
- printk(KERN_DEBUG "capi_signal: DATA_B3_IND %u len=%d\n",
- datahandle, skb->len-CAPIMSG_LEN(skb->data));
-#endif
+ pr_debug("capi_signal: DATA_B3_IND %u len=%d\n",
+ datahandle, skb->len-CAPIMSG_LEN(skb->data));
skb_queue_tail(&mp->inqueue, skb);
handle_minor_recv(mp);
@@ -661,11 +628,9 @@
} else if (CAPIMSG_SUBCOMMAND(skb->data) == CAPI_CONF) {
datahandle = CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4);
-#ifdef _DEBUG_DATAFLOW
- printk(KERN_DEBUG "capi_signal: DATA_B3_CONF %u 0x%x\n",
- datahandle,
- CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4+2));
-#endif
+ pr_debug("capi_signal: DATA_B3_CONF %u 0x%x\n",
+ datahandle,
+ CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4+2));
kfree_skb(skb);
capiminor_del_ack(mp, datahandle);
tty = tty_port_tty_get(&mp->port);
@@ -1095,9 +1060,7 @@
struct capiminor *mp = tty->driver_data;
struct sk_buff *skb;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_write(count=%d)\n", count);
-#endif
+ pr_debug("capinc_tty_write(count=%d)\n", count);
spin_lock_bh(&mp->outlock);
skb = mp->outskb;
@@ -1133,9 +1096,7 @@
struct sk_buff *skb;
int ret = 1;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_put_char(%u)\n", ch);
-#endif
+ pr_debug("capinc_put_char(%u)\n", ch);
spin_lock_bh(&mp->outlock);
skb = mp->outskb;
@@ -1174,9 +1135,7 @@
struct capiminor *mp = tty->driver_data;
struct sk_buff *skb;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_flush_chars\n");
-#endif
+ pr_debug("capinc_tty_flush_chars\n");
spin_lock_bh(&mp->outlock);
skb = mp->outskb;
@@ -1200,9 +1159,7 @@
room = CAPINC_MAX_SENDQUEUE-skb_queue_len(&mp->outqueue);
room *= CAPI_MAX_BLKSIZE;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_write_room = %d\n", room);
-#endif
+ pr_debug("capinc_tty_write_room = %d\n", room);
return room;
}
@@ -1210,12 +1167,10 @@
{
struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_chars_in_buffer = %d nack=%d sq=%d rq=%d\n",
- mp->outbytes, mp->nack,
- skb_queue_len(&mp->outqueue),
- skb_queue_len(&mp->inqueue));
-#endif
+ pr_debug("capinc_tty_chars_in_buffer = %d nack=%d sq=%d rq=%d\n",
+ mp->outbytes, mp->nack,
+ skb_queue_len(&mp->outqueue),
+ skb_queue_len(&mp->inqueue));
return mp->outbytes;
}
@@ -1227,17 +1182,13 @@
static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
{
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_set_termios\n");
-#endif
+ pr_debug("capinc_tty_set_termios\n");
}
static void capinc_tty_throttle(struct tty_struct *tty)
{
struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_throttle\n");
-#endif
+ pr_debug("capinc_tty_throttle\n");
mp->ttyinstop = 1;
}
@@ -1245,9 +1196,7 @@
{
struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_unthrottle\n");
-#endif
+ pr_debug("capinc_tty_unthrottle\n");
mp->ttyinstop = 0;
handle_minor_recv(mp);
}
@@ -1256,9 +1205,7 @@
{
struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_stop\n");
-#endif
+ pr_debug("capinc_tty_stop\n");
mp->ttyoutstop = 1;
}
@@ -1266,9 +1213,7 @@
{
struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_start\n");
-#endif
+ pr_debug("capinc_tty_start\n");
mp->ttyoutstop = 0;
handle_minor_send(mp);
}
@@ -1277,39 +1222,29 @@
{
struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_hangup\n");
-#endif
+ pr_debug("capinc_tty_hangup\n");
tty_port_hangup(&mp->port);
}
static int capinc_tty_break_ctl(struct tty_struct *tty, int state)
{
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_break_ctl(%d)\n", state);
-#endif
+ pr_debug("capinc_tty_break_ctl(%d)\n", state);
return 0;
}
static void capinc_tty_flush_buffer(struct tty_struct *tty)
{
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_flush_buffer\n");
-#endif
+ pr_debug("capinc_tty_flush_buffer\n");
}
static void capinc_tty_set_ldisc(struct tty_struct *tty)
{
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_set_ldisc\n");
-#endif
+ pr_debug("capinc_tty_set_ldisc\n");
}
static void capinc_tty_send_xchar(struct tty_struct *tty, char ch)
{
-#ifdef _DEBUG_TTYFUNCS
- printk(KERN_DEBUG "capinc_tty_send_xchar(%d)\n", ch);
-#endif
+ pr_debug("capinc_tty_send_xchar(%d)\n", ch);
}
static const struct tty_operations capinc_ops = {
@@ -1514,10 +1449,8 @@
proc_init();
-#if defined(CONFIG_ISDN_CAPI_CAPIFS) || defined(CONFIG_ISDN_CAPI_CAPIFS_MODULE)
- compileinfo = " (middleware+capifs)";
-#elif defined(CONFIG_ISDN_CAPI_MIDDLEWARE)
- compileinfo = " (no capifs)";
+#ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
+ compileinfo = " (middleware)";
#else
compileinfo = " (no middleware)";
#endif
diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
deleted file mode 100644
index b4faed7..0000000
--- a/drivers/isdn/capi/capifs.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* $Id: capifs.c,v 1.1.2.3 2004/01/16 21:09:26 keil Exp $
- *
- * Copyright 2000 by Carsten Paeth <calle@calle.de>
- *
- * Heavily based on devpts filesystem from H. Peter Anvin
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/slab.h>
-#include <linux/namei.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/sched.h> /* current */
-
-#include "capifs.h"
-
-MODULE_DESCRIPTION("CAPI4Linux: /dev/capi/ filesystem");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------------ */
-
-#define CAPIFS_SUPER_MAGIC (('C'<<8)|'N')
-
-static struct vfsmount *capifs_mnt;
-static int capifs_mnt_count;
-
-static struct {
- int setuid;
- int setgid;
- uid_t uid;
- gid_t gid;
- umode_t mode;
-} config = {.mode = 0600};
-
-/* ------------------------------------------------------------------ */
-
-static int capifs_remount(struct super_block *s, int *flags, char *data)
-{
- int setuid = 0;
- int setgid = 0;
- uid_t uid = 0;
- gid_t gid = 0;
- umode_t mode = 0600;
- char *this_char;
- char *new_opt = kstrdup(data, GFP_KERNEL);
-
- this_char = NULL;
- while ((this_char = strsep(&data, ",")) != NULL) {
- int n;
- char dummy;
- if (!*this_char)
- continue;
- if (sscanf(this_char, "uid=%i%c", &n, &dummy) == 1) {
- setuid = 1;
- uid = n;
- } else if (sscanf(this_char, "gid=%i%c", &n, &dummy) == 1) {
- setgid = 1;
- gid = n;
- } else if (sscanf(this_char, "mode=%o%c", &n, &dummy) == 1)
- mode = n & ~S_IFMT;
- else {
- kfree(new_opt);
- printk("capifs: called with bogus options\n");
- return -EINVAL;
- }
- }
-
- mutex_lock(&s->s_root->d_inode->i_mutex);
-
- replace_mount_options(s, new_opt);
- config.setuid = setuid;
- config.setgid = setgid;
- config.uid = uid;
- config.gid = gid;
- config.mode = mode;
-
- mutex_unlock(&s->s_root->d_inode->i_mutex);
-
- return 0;
-}
-
-static const struct super_operations capifs_sops =
-{
- .statfs = simple_statfs,
- .remount_fs = capifs_remount,
- .show_options = generic_show_options,
-};
-
-
-static int
-capifs_fill_super(struct super_block *s, void *data, int silent)
-{
- struct inode * inode;
-
- s->s_blocksize = 1024;
- s->s_blocksize_bits = 10;
- s->s_magic = CAPIFS_SUPER_MAGIC;
- s->s_op = &capifs_sops;
- s->s_time_gran = 1;
-
- inode = new_inode(s);
- if (!inode)
- goto fail;
- inode->i_ino = 1;
- inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
- inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
- inode->i_op = &simple_dir_inode_operations;
- inode->i_fop = &simple_dir_operations;
- inode->i_nlink = 2;
-
- s->s_root = d_alloc_root(inode);
- if (s->s_root)
- return 0;
-
- printk("capifs: get root dentry failed\n");
- iput(inode);
-fail:
- return -ENOMEM;
-}
-
-static struct dentry *capifs_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data)
-{
- return mount_single(fs_type, flags, data, capifs_fill_super);
-}
-
-static struct file_system_type capifs_fs_type = {
- .owner = THIS_MODULE,
- .name = "capifs",
- .mount = capifs_mount,
- .kill_sb = kill_anon_super,
-};
-
-static struct dentry *new_ncci(unsigned int number, dev_t device)
-{
- struct super_block *s = capifs_mnt->mnt_sb;
- struct dentry *root = s->s_root;
- struct dentry *dentry;
- struct inode *inode;
- char name[10];
- int namelen;
-
- mutex_lock(&root->d_inode->i_mutex);
-
- namelen = sprintf(name, "%d", number);
- dentry = lookup_one_len(name, root, namelen);
- if (IS_ERR(dentry)) {
- dentry = NULL;
- goto unlock_out;
- }
-
- if (dentry->d_inode) {
- dput(dentry);
- dentry = NULL;
- goto unlock_out;
- }
-
- inode = new_inode(s);
- if (!inode) {
- dput(dentry);
- dentry = NULL;
- goto unlock_out;
- }
-
- /* config contents is protected by root's i_mutex */
- inode->i_uid = config.setuid ? config.uid : current_fsuid();
- inode->i_gid = config.setgid ? config.gid : current_fsgid();
- inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
- inode->i_ino = number + 2;
- init_special_inode(inode, S_IFCHR|config.mode, device);
-
- d_instantiate(dentry, inode);
- dget(dentry);
-
-unlock_out:
- mutex_unlock(&root->d_inode->i_mutex);
-
- return dentry;
-}
-
-struct dentry *capifs_new_ncci(unsigned int number, dev_t device)
-{
- struct dentry *dentry;
-
- if (simple_pin_fs(&capifs_fs_type, &capifs_mnt, &capifs_mnt_count) < 0)
- return NULL;
-
- dentry = new_ncci(number, device);
- if (!dentry)
- simple_release_fs(&capifs_mnt, &capifs_mnt_count);
-
- return dentry;
-}
-
-void capifs_free_ncci(struct dentry *dentry)
-{
- struct dentry *root = capifs_mnt->mnt_sb->s_root;
- struct inode *inode;
-
- if (!dentry)
- return;
-
- mutex_lock(&root->d_inode->i_mutex);
-
- inode = dentry->d_inode;
- if (inode) {
- drop_nlink(inode);
- d_delete(dentry);
- dput(dentry);
- }
- dput(dentry);
-
- mutex_unlock(&root->d_inode->i_mutex);
-
- simple_release_fs(&capifs_mnt, &capifs_mnt_count);
-}
-
-static int __init capifs_init(void)
-{
- return register_filesystem(&capifs_fs_type);
-}
-
-static void __exit capifs_exit(void)
-{
- unregister_filesystem(&capifs_fs_type);
-}
-
-EXPORT_SYMBOL(capifs_new_ncci);
-EXPORT_SYMBOL(capifs_free_ncci);
-
-module_init(capifs_init);
-module_exit(capifs_exit);
diff --git a/drivers/isdn/capi/capifs.h b/drivers/isdn/capi/capifs.h
deleted file mode 100644
index e193d11..0000000
--- a/drivers/isdn/capi/capifs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* $Id: capifs.h,v 1.1.2.2 2004/01/16 21:09:26 keil Exp $
- *
- * Copyright 2000 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/dcache.h>
-
-#if defined(CONFIG_ISDN_CAPI_CAPIFS) || defined(CONFIG_ISDN_CAPI_CAPIFS_MODULE)
-
-struct dentry *capifs_new_ncci(unsigned int num, dev_t device);
-void capifs_free_ncci(struct dentry *dentry);
-
-#else
-
-static inline struct dentry *capifs_new_ncci(unsigned int num, dev_t device)
-{
- return NULL;
-}
-
-static inline void capifs_free_ncci(struct dentry *dentry)
-{
-}
-
-#endif
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 8a3c5cf..3913f47 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -1157,7 +1157,6 @@
struct urb *urb;
int status;
struct usb_iso_packet_descriptor *ifd;
- int offset;
unsigned long flags;
int i;
struct sk_buff *skb;
@@ -1225,7 +1224,6 @@
* successfully sent
* - all following frames are not sent at all
*/
- offset = done->limit; /* default (no error) */
for (i = 0; i < BAS_NUMFRAMES; i++) {
ifd = &urb->iso_frame_desc[i];
if (ifd->status ||
@@ -1235,9 +1233,6 @@
i, ifd->actual_length,
ifd->length,
get_usb_statmsg(ifd->status));
- offset = (ifd->offset +
- ifd->actual_length)
- % BAS_OUTBUFSIZE;
break;
}
}
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index a141876..ba74646 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -390,12 +390,12 @@
*/
static int cid_of_response(char *s)
{
- unsigned long cid;
+ int cid;
int rc;
if (s[-1] != ';')
return 0; /* no CID separator */
- rc = strict_strtoul(s, 10, &cid);
+ rc = kstrtoint(s, 10, &cid);
if (rc)
return 0; /* CID not numeric */
if (cid < 1 || cid > 65535)
@@ -566,27 +566,19 @@
case RT_ZCAU:
event->parameter = -1;
if (curarg + 1 < params) {
- unsigned long type, value;
+ u8 type, value;
- i = strict_strtoul(argv[curarg++], 16, &type);
- j = strict_strtoul(argv[curarg++], 16, &value);
-
- if (i == 0 && type < 256 &&
- j == 0 && value < 256)
+ i = kstrtou8(argv[curarg++], 16, &type);
+ j = kstrtou8(argv[curarg++], 16, &value);
+ if (i == 0 && j == 0)
event->parameter = (type << 8) | value;
} else
curarg = params - 1;
break;
case RT_NUMBER:
- event->parameter = -1;
- if (curarg < params) {
- unsigned long res;
- int rc;
-
- rc = strict_strtoul(argv[curarg++], 10, &res);
- if (rc == 0)
- event->parameter = res;
- }
+ if (curarg >= params ||
+ kstrtoint(argv[curarg++], 10, &event->parameter))
+ event->parameter = -1;
gig_dbg(DEBUG_EVENT, "parameter==%d", event->parameter);
break;
}
diff --git a/drivers/isdn/hardware/eicon/debug.c b/drivers/isdn/hardware/eicon/debug.c
index 3626401..7a9894c 100644
--- a/drivers/isdn/hardware/eicon/debug.c
+++ b/drivers/isdn/hardware/eicon/debug.c
@@ -861,7 +861,7 @@
void diva_mnt_add_xdi_adapter (const DESCRIPTOR* d) {
diva_os_spin_lock_magic_t old_irql, old_irql1;
dword sec, usec, logical, serial, org_mask;
- int id, best_id = 0, free_id = -1;
+ int id, free_id = -1;
char tmp[128];
diva_dbg_entry_head_t* pmsg = NULL;
int len;
@@ -906,7 +906,6 @@
and slot is still free - reuse it
*/
free_id = id;
- best_id = 1;
break;
}
}
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 8c5c563..a339598 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -1198,7 +1198,6 @@
word ch;
word i;
word Info;
- word CIP;
byte LinkLayer;
API_PARSE * ai;
API_PARSE * bp;
@@ -1340,7 +1339,6 @@
add_s(plci,BC,&parms[6]);
add_s(plci,LLC,&parms[7]);
add_s(plci,HLC,&parms[8]);
- CIP = GET_WORD(parms[0].info);
if (a->Info_Mask[appl->Id-1] & 0x200)
{
/* early B3 connect (CIP mask bit 9) no release after a disc */
@@ -4830,7 +4828,6 @@
dword x_Id;
dword Id;
dword rId;
- word Number = 0;
word i;
word cip;
dword cip_mask;
@@ -5106,7 +5103,7 @@
}
}
- if(plci->appl) Number = plci->appl->Number++;
+ if(plci->appl) plci->appl->Number++;
switch(plci->Sig.Ind) {
/* Response to Get_Supported_Services request */
@@ -5894,7 +5891,6 @@
break;
case TEL_CTRL:
- Number = 0;
ie = multi_fac_parms[0]; /* inspect the facility hook indications */
if(plci->State==ADVANCED_VOICE_SIG && ie[0]){
switch (ie[1]&0x91) {
@@ -10119,14 +10115,12 @@
static void dtmf_confirmation (dword Id, PLCI *plci)
{
- word Info;
word i;
byte result[4];
dbug (1, dprintf ("[%06lx] %s,%d: dtmf_confirmation",
UnMapId (Id), (char *)(FILE_), __LINE__));
- Info = GOOD;
result[0] = 2;
PUT_WORD (&result[1], DTMF_SUCCESS);
if (plci->dtmf_send_requests != 0)
@@ -11520,13 +11514,12 @@
static void mixer_command (dword Id, PLCI *plci, byte Rc)
{
DIVA_CAPI_ADAPTER *a;
- word i, internal_command, Info;
+ word i, internal_command;
dbug (1, dprintf ("[%06lx] %s,%d: mixer_command %02x %04x %04x",
UnMapId (Id), (char *)(FILE_), __LINE__, Rc, plci->internal_command,
plci->li_cmd));
- Info = GOOD;
a = plci->adapter;
internal_command = plci->internal_command;
plci->internal_command = 0;
@@ -11550,7 +11543,6 @@
{
dbug (1, dprintf ("[%06lx] %s,%d: Load mixer failed",
UnMapId (Id), (char *)(FILE_), __LINE__));
- Info = _FACILITY_NOT_SUPPORTED;
break;
}
if (plci->internal_command)
@@ -11592,7 +11584,6 @@
} while ((plci->li_plci_b_write_pos != plci->li_plci_b_req_pos)
&& !(plci->li_plci_b_queue[i] & LI_PLCI_B_LAST_FLAG));
}
- Info = _FACILITY_NOT_SUPPORTED;
break;
}
if (plci->internal_command)
@@ -11610,7 +11601,6 @@
{
dbug (1, dprintf ("[%06lx] %s,%d: Unload mixer failed",
UnMapId (Id), (char *)(FILE_), __LINE__));
- Info = _FACILITY_NOT_SUPPORTED;
break;
}
if (plci->internal_command)
@@ -12448,13 +12438,11 @@
static void mixer_indication_coefs_set (dword Id, PLCI *plci)
{
dword d;
- DIVA_CAPI_ADAPTER *a;
byte result[12];
dbug (1, dprintf ("[%06lx] %s,%d: mixer_indication_coefs_set",
UnMapId (Id), (char *)(FILE_), __LINE__));
- a = plci->adapter;
if (plci->li_plci_b_read_pos != plci->li_plci_b_req_pos)
{
do
@@ -14111,13 +14099,11 @@
static void fax_connect_ack_command (dword Id, PLCI *plci, byte Rc)
{
- word Info;
word internal_command;
dbug (1, dprintf ("[%06lx] %s,%d: fax_connect_ack_command %02x %04x",
UnMapId (Id), (char *)(FILE_), __LINE__, Rc, plci->internal_command));
- Info = GOOD;
internal_command = plci->internal_command;
plci->internal_command = 0;
switch (internal_command)
@@ -14160,13 +14146,11 @@
static void fax_edata_ack_command (dword Id, PLCI *plci, byte Rc)
{
- word Info;
word internal_command;
dbug (1, dprintf ("[%06lx] %s,%d: fax_edata_ack_command %02x %04x",
UnMapId (Id), (char *)(FILE_), __LINE__, Rc, plci->internal_command));
- Info = GOOD;
internal_command = plci->internal_command;
plci->internal_command = 0;
switch (internal_command)
@@ -14395,13 +14379,11 @@
static void rtp_connect_b3_res_command (dword Id, PLCI *plci, byte Rc)
{
- word Info;
word internal_command;
dbug (1, dprintf ("[%06lx] %s,%d: rtp_connect_b3_res_command %02x %04x",
UnMapId (Id), (char *)(FILE_), __LINE__, Rc, plci->internal_command));
- Info = GOOD;
internal_command = plci->internal_command;
plci->internal_command = 0;
switch (internal_command)
@@ -14423,7 +14405,6 @@
{
dbug (1, dprintf ("[%06lx] %s,%d: RTP setting connect resp info failed %02x",
UnMapId (Id), (char *)(FILE_), __LINE__, Rc));
- Info = _WRONG_STATE;
break;
}
if (plci_nl_busy (plci))
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 4343aba..b01a7be 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -405,7 +405,7 @@
u_char *bdata, int count)
{
u_char *ptr, *ptr1, new_f2;
- int total, maxlen, new_z2;
+ int maxlen, new_z2;
struct zt *zp;
if ((bch->debug & DEBUG_HW_BCHANNEL) && !(bch->debug & DEBUG_HW_BFIFO))
@@ -431,7 +431,6 @@
printk(KERN_WARNING "HFCPCI: receive out of memory\n");
return;
}
- total = count;
count -= 3;
ptr = skb_put(bch->rx_skb, count);
@@ -968,7 +967,6 @@
ph_state_nt(struct dchannel *dch)
{
struct hfc_pci *hc = dch->hw;
- u_char val;
if (dch->debug)
printk(KERN_DEBUG "%s: NT newstate %x\n",
@@ -982,7 +980,7 @@
hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
/* Clear already pending ints */
- val = Read_hfc(hc, HFCPCI_INT_S1);
+ (void) Read_hfc(hc, HFCPCI_INT_S1);
Write_hfc(hc, HFCPCI_STATES, 4 | HFCPCI_LOAD_STATE);
udelay(10);
Write_hfc(hc, HFCPCI_STATES, 4);
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 8700474..3ccbff1 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -118,14 +118,12 @@
ctrl_complete(struct urb *urb)
{
struct hfcsusb *hw = (struct hfcsusb *) urb->context;
- struct ctrl_buf *buf;
if (debug & DBG_HFC_CALL_TRACE)
printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
urb->dev = hw->dev;
if (hw->ctrl_cnt) {
- buf = &hw->ctrl_buff[hw->ctrl_out_idx];
hw->ctrl_cnt--; /* decrement actual count */
if (++hw->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
hw->ctrl_out_idx = 0; /* pointer wrap */
@@ -1726,7 +1724,6 @@
static int
setup_hfcsusb(struct hfcsusb *hw)
{
- int err;
u_char b;
if (debug & DBG_HFC_CALL_TRACE)
@@ -1745,7 +1742,7 @@
}
/* first set the needed config, interface and alternate */
- err = usb_set_interface(hw->dev, hw->if_used, hw->alt_used);
+ (void) usb_set_interface(hw->dev, hw->if_used, hw->alt_used);
hw->led_state = 0;
diff --git a/drivers/isdn/hisax/arcofi.c b/drivers/isdn/hisax/arcofi.c
index 85a8fd8..21cbbe1 100644
--- a/drivers/isdn/hisax/arcofi.c
+++ b/drivers/isdn/hisax/arcofi.c
@@ -30,8 +30,6 @@
static void
send_arcofi(struct IsdnCardState *cs) {
- u_char val;
-
add_arcofi_timer(cs);
cs->dc.isac.mon_txp = 0;
cs->dc.isac.mon_txc = cs->dc.isac.arcofi_list->len;
@@ -45,7 +43,7 @@
cs->dc.isac.mocr &= 0x0f;
cs->dc.isac.mocr |= 0xa0;
cs->writeisac(cs, ISAC_MOCR, cs->dc.isac.mocr);
- val = cs->readisac(cs, ISAC_MOSR);
+ (void) cs->readisac(cs, ISAC_MOSR);
cs->writeisac(cs, ISAC_MOX1, cs->dc.isac.mon_tx[cs->dc.isac.mon_txp++]);
cs->dc.isac.mocr |= 0x10;
cs->writeisac(cs, ISAC_MOCR, cs->dc.isac.mocr);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 496d477..9e5e87b 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -129,12 +129,10 @@
static int __devinit elsa_cs_config(struct pcmcia_device *link)
{
- local_info_t *dev;
int i;
IsdnCard_t icard;
dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
- dev = link->priv;
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c
index cbda379..3fa9f61 100644
--- a/drivers/isdn/hisax/elsa_ser.c
+++ b/drivers/isdn/hisax/elsa_ser.c
@@ -109,11 +109,10 @@
{
int quot = 0, baud_base;
unsigned cval, fcr = 0;
- int bits;
/* byte size and parity */
- cval = 0x03; bits = 10;
+ cval = 0x03;
/* Determine divisor based on baud rate */
baud_base = BASE_BAUD;
quot = baud_base / baud;
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index ed9527a..f407de0 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -258,11 +258,9 @@
ctrl_complete(struct urb *urb)
{
hfcusb_data *hfc = (hfcusb_data *) urb->context;
- ctrl_buft *buf;
urb->dev = hfc->dev;
if (hfc->ctrl_cnt) {
- buf = &hfc->ctrl_buff[hfc->ctrl_out_idx];
hfc->ctrl_cnt--; /* decrement actual count */
if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
hfc->ctrl_out_idx = 0; /* pointer wrap */
@@ -1097,7 +1095,7 @@
hfc_usb_init(hfcusb_data * hfc)
{
usb_fifo *fifo;
- int i, err;
+ int i;
u_char b;
struct hisax_b_if *p_b_if[2];
@@ -1112,7 +1110,7 @@
}
/* first set the needed config, interface and alternate */
- err = usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
+ usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
/* do Chip reset */
write_usb(hfc, HFCUSB_CIRM, 8);
diff --git a/drivers/isdn/hisax/ipacx.c b/drivers/isdn/hisax/ipacx.c
index 3321041..6908404 100644
--- a/drivers/isdn/hisax/ipacx.c
+++ b/drivers/isdn/hisax/ipacx.c
@@ -96,7 +96,7 @@
{
struct IsdnCardState *cs = (struct IsdnCardState *) st->l1.hardware;
struct sk_buff *skb = arg;
- u_char cda1_cr, cda2_cr;
+ u_char cda1_cr;
switch (pr) {
case (PH_DATA |REQUEST):
@@ -163,7 +163,7 @@
cs->writeisac(cs, IPACX_CDA_TSDP10, 0x80); // Timeslot 0 is B1
cs->writeisac(cs, IPACX_CDA_TSDP11, 0x81); // Timeslot 0 is B1
cda1_cr = cs->readisac(cs, IPACX_CDA1_CR);
- cda2_cr = cs->readisac(cs, IPACX_CDA2_CR);
+ (void) cs->readisac(cs, IPACX_CDA2_CR);
if ((long)arg &1) { // loop B1
cs->writeisac(cs, IPACX_CDA1_CR, cda1_cr |0x0a);
}
diff --git a/drivers/isdn/hisax/jade.c b/drivers/isdn/hisax/jade.c
index ea8f840..a06cea0 100644
--- a/drivers/isdn/hisax/jade.c
+++ b/drivers/isdn/hisax/jade.c
@@ -23,10 +23,9 @@
int
JadeVersion(struct IsdnCardState *cs, char *s)
{
- int ver,i;
+ int ver;
int to = 50;
cs->BC_Write_Reg(cs, -1, 0x50, 0x19);
- i=0;
while (to) {
udelay(1);
ver = cs->BC_Read_Reg(cs, -1, 0x60);
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index 8e2fd02..b0d9ab1 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -2943,7 +2943,7 @@
static void
dss1up(struct PStack *st, int pr, void *arg)
{
- int i, mt, cr, cause, callState;
+ int i, mt, cr, callState;
char *ptr;
u_char *p;
struct sk_buff *skb = arg;
@@ -3034,12 +3034,10 @@
return;
}
} else if (mt == MT_STATUS) {
- cause = 0;
if ((ptr = findie(skb->data, skb->len, IE_CAUSE, 0)) != NULL) {
ptr++;
if (*ptr++ == 2)
ptr++;
- cause = *ptr & 0x7f;
}
callState = 0;
if ((ptr = findie(skb->data, skb->len, IE_CALL_STATE, 0)) != NULL) {
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index 7b229c0..092dcbb 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -2883,7 +2883,7 @@
static void
ni1up(struct PStack *st, int pr, void *arg)
{
- int i, mt, cr, cause, callState;
+ int i, mt, cr, callState;
char *ptr;
u_char *p;
struct sk_buff *skb = arg;
@@ -2986,12 +2986,10 @@
return;
}
} else if (mt == MT_STATUS) {
- cause = 0;
if ((ptr = findie(skb->data, skb->len, IE_CAUSE, 0)) != NULL) {
ptr++;
if (*ptr++ == 2)
ptr++;
- cause = *ptr & 0x7f;
}
callState = 0;
if ((ptr = findie(skb->data, skb->len, IE_CALL_STATE, 0)) != NULL) {
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
index 64f78a8..b9054cb 100644
--- a/drivers/isdn/hisax/st5481.h
+++ b/drivers/isdn/hisax/st5481.h
@@ -377,7 +377,6 @@
};
struct st5481_adapter {
- struct list_head list;
int number_of_leds;
struct usb_device *usb_dev;
struct hisax_d_if hisax_d_if;
diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c
index 1375123..9f7fd18 100644
--- a/drivers/isdn/hisax/st5481_init.c
+++ b/drivers/isdn/hisax/st5481_init.c
@@ -46,8 +46,6 @@
#endif
int st5481_debug;
-static LIST_HEAD(adapter_list);
-
/* ======================================================================
* registration/deregistration with the USB layer
*/
@@ -86,7 +84,6 @@
adapter->bcs[i].b_if.ifc.priv = &adapter->bcs[i];
adapter->bcs[i].b_if.ifc.l2l1 = st5481_b_l2l1;
}
- list_add(&adapter->list, &adapter_list);
retval = st5481_setup_usb(adapter);
if (retval < 0)
@@ -125,6 +122,7 @@
err_usb:
st5481_release_usb(adapter);
err:
+ kfree(adapter);
return -EIO;
}
@@ -142,8 +140,6 @@
if (!adapter)
return;
- list_del(&adapter->list);
-
st5481_stop(adapter);
st5481_release_b(&adapter->bcs[1]);
st5481_release_b(&adapter->bcs[0]);
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index aa25e18..360f9ec 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -111,12 +111,10 @@
static int __devinit teles_cs_config(struct pcmcia_device *link)
{
- local_info_t *dev;
int i;
IsdnCard_t icard;
dev_dbg(&link->dev, "teles_config(0x%p)\n", link);
- dev = link->priv;
i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
if (i != 0)
diff --git a/drivers/isdn/hysdn/hysdn_proclog.c b/drivers/isdn/hysdn/hysdn_proclog.c
index 2ee93d0..236cc7d 100644
--- a/drivers/isdn/hysdn/hysdn_proclog.c
+++ b/drivers/isdn/hysdn/hysdn_proclog.c
@@ -155,7 +155,6 @@
static ssize_t
hysdn_log_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
{
- unsigned long u = 0;
int rc;
unsigned char valbuf[128];
hysdn_card *card = file->private_data;
@@ -167,12 +166,10 @@
valbuf[count] = 0; /* terminating 0 */
- rc = strict_strtoul(valbuf, 0, &u);
-
- if (rc == 0) {
- card->debug_flags = u; /* remember debug flags */
- hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags);
- }
+ rc = kstrtoul(valbuf, 0, &card->debug_flags);
+ if (rc < 0)
+ return rc;
+ hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags);
return (count);
} /* hysdn_log_write */
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 15632bd..6ed82ad 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -399,13 +399,8 @@
#include <linux/isdn/capicmd.h>
static int
-isdn_capi_rec_hl_msg(capi_msg *cm) {
-
- int di;
- int ch;
-
- di = (cm->adr.Controller & 0x7f) -1;
- ch = isdn_dc2minor(di, (cm->adr.Controller>>8)& 0x7f);
+isdn_capi_rec_hl_msg(capi_msg *cm)
+{
switch(cm->Command) {
case CAPI_FACILITY:
/* in the moment only handled in tty */
@@ -1278,7 +1273,6 @@
uint minor = iminor(file->f_path.dentry->d_inode);
isdn_ctrl c;
int drvidx;
- int chidx;
int ret;
int i;
char __user *p;
@@ -1340,7 +1334,6 @@
drvidx = isdn_minor2drv(minor);
if (drvidx < 0)
return -ENODEV;
- chidx = isdn_minor2chan(minor);
if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING))
return -ENODEV;
return 0;
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 2a7d17c..9798811 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1678,7 +1678,6 @@
u32 your_seq;
__be32 local;
__be32 *addr, *mask;
- u16 unused;
if (skb->len < 14)
return;
@@ -1722,7 +1721,6 @@
lp->cisco_last_slarp_in = jiffies;
my_seq = be32_to_cpup((__be32 *)(p + 0));
your_seq = be32_to_cpup((__be32 *)(p + 4));
- unused = be16_to_cpup((__be16 *)(p + 8));
p += 10;
lp->cisco_yourseq = my_seq;
lp->cisco_mineseen = your_seq;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 607d846..d850427 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -998,7 +998,6 @@
{
uint cflag,
cval,
- fcr,
quot;
int i;
@@ -1037,7 +1036,6 @@
cval |= UART_LCR_PARITY;
if (!(cflag & PARODD))
cval |= UART_LCR_EPAR;
- fcr = 0;
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index d0aeb44..5bc0015 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -1640,7 +1640,7 @@
}
static void
-l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st14_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct layer2 *l2 = fi->userdata;
struct sk_buff *skb = arg;
@@ -1654,7 +1654,7 @@
}
static void
-l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st5_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct layer2 *l2 = fi->userdata;
struct sk_buff *skb = arg;
@@ -1671,7 +1671,7 @@
}
static void
-l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st6_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct layer2 *l2 = fi->userdata;
struct sk_buff *skb = arg;
@@ -1685,7 +1685,7 @@
}
static void
-l2_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct layer2 *l2 = fi->userdata;
struct sk_buff *skb = arg;
@@ -1829,14 +1829,14 @@
{ST_L2_6, EV_L2_FRAME_ERROR, l2_frame_error},
{ST_L2_7, EV_L2_FRAME_ERROR, l2_frame_error_reest},
{ST_L2_8, EV_L2_FRAME_ERROR, l2_frame_error_reest},
- {ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+ {ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistent_da},
{ST_L2_2, EV_L1_DEACTIVATE, l2_st24_tei_remove},
{ST_L2_3, EV_L1_DEACTIVATE, l2_st3_tei_remove},
- {ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistant_da},
- {ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistant_da},
- {ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistant_da},
- {ST_L2_7, EV_L1_DEACTIVATE, l2_persistant_da},
- {ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da},
+ {ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistent_da},
+ {ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistent_da},
+ {ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistent_da},
+ {ST_L2_7, EV_L1_DEACTIVATE, l2_persistent_da},
+ {ST_L2_8, EV_L1_DEACTIVATE, l2_persistent_da},
};
static int
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 7446d8b..8e32522 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -457,6 +457,9 @@
if (get_user(len, optlen))
return -EFAULT;
+ if (len != sizeof(char))
+ return -EINVAL;
+
switch (optname) {
case MISDN_TIME_STAMP:
if (_pms(sk)->cmask & MISDN_TIME_STAMP)
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index e7089a1..b37e618 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -349,6 +349,7 @@
{LM3530_NAME, 0},
{}
};
+MODULE_DEVICE_TABLE(i2c, lm3530_id);
static struct i2c_driver lm3530_i2c_driver = {
.probe = lm3530_probe,
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 0aaa059..34ae49d 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -5,8 +5,10 @@
---help---
This is a very simple module which allows you to run
multiple instances of the same Linux kernel, using the
- "lguest" command found in the Documentation/lguest directory.
+ "lguest" command found in the Documentation/virtual/lguest
+ directory.
+
Note that "lguest" is pronounced to rhyme with "fell quest",
- not "rustyvisor". See Documentation/lguest/lguest.txt.
+ not "rustyvisor". See Documentation/virtual/lguest/lguest.txt.
If unsure, say N. If curious, say M. If masochistic, say Y.
diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile
index 7d463c2..8ac947c 100644
--- a/drivers/lguest/Makefile
+++ b/drivers/lguest/Makefile
@@ -18,7 +18,7 @@
Beer:
@for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}"
Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery:
- @sh ../../Documentation/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
+ @sh ../../Documentation/virtual/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
Puppy:
@clear
@printf " __ \n (___()'\`;\n /, /\`\n \\\\\\\"--\\\\\\ \n"
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 8b021eb..6cccd60 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -40,7 +40,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/freezer.h>
#include <linux/syscalls.h>
#include <linux/suspend.h>
@@ -2527,12 +2527,9 @@
#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
int pmu_sys_suspended;
-static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+static int pmu_syscore_suspend(void)
{
- if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended)
- return 0;
-
- /* Suspend PMU event interrupts */\
+ /* Suspend PMU event interrupts */
pmu_suspend();
pmu_sys_suspended = 1;
@@ -2544,12 +2541,12 @@
return 0;
}
-static int pmu_sys_resume(struct sys_device *sysdev)
+static void pmu_syscore_resume(void)
{
struct adb_request req;
if (!pmu_sys_suspended)
- return 0;
+ return;
/* Tell PMU we are ready */
pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
@@ -2562,50 +2559,21 @@
/* Resume PMU event interrupts */
pmu_resume();
pmu_sys_suspended = 0;
-
- return 0;
}
-#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
-
-static struct sysdev_class pmu_sysclass = {
- .name = "pmu",
+static struct syscore_ops pmu_syscore_ops = {
+ .suspend = pmu_syscore_suspend,
+ .resume = pmu_syscore_resume,
};
-static struct sys_device device_pmu = {
- .cls = &pmu_sysclass,
-};
-
-static struct sysdev_driver driver_pmu = {
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
- .suspend = &pmu_sys_suspend,
- .resume = &pmu_sys_resume,
-#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
-};
-
-static int __init init_pmu_sysfs(void)
+static int pmu_syscore_register(void)
{
- int rc;
+ register_syscore_ops(&pmu_syscore_ops);
- rc = sysdev_class_register(&pmu_sysclass);
- if (rc) {
- printk(KERN_ERR "Failed registering PMU sys class\n");
- return -ENODEV;
- }
- rc = sysdev_register(&device_pmu);
- if (rc) {
- printk(KERN_ERR "Failed registering PMU sys device\n");
- return -ENODEV;
- }
- rc = sysdev_driver_register(&pmu_sysclass, &driver_pmu);
- if (rc) {
- printk(KERN_ERR "Failed registering PMU sys driver\n");
- return -ENODEV;
- }
return 0;
}
-
-subsys_initcall(init_pmu_sysfs);
+subsys_initcall(pmu_syscore_register);
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
EXPORT_SYMBOL(pmu_request);
EXPORT_SYMBOL(pmu_queue_request);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index ccbd39a..c545039 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -356,6 +356,8 @@
select DVB_TDA826X if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_IX2505V if !DVB_FE_CUSTOMISE
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ select DVB_PLL if !DVB_FE_CUSTOMISE
help
Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
index fc5ccd8..21c52e3 100644
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ b/drivers/media/dvb/firewire/firedtv-avc.c
@@ -1320,14 +1320,10 @@
{
int ret;
- mutex_lock(&fdtv->avc_mutex);
-
ret = fdtv_read(fdtv, addr, data);
if (ret < 0)
dev_err(fdtv->device, "CMP: read I/O error\n");
- mutex_unlock(&fdtv->avc_mutex);
-
return ret;
}
@@ -1335,18 +1331,9 @@
{
int ret;
- mutex_lock(&fdtv->avc_mutex);
-
- /* data[] is stack-allocated and should not be DMA-mapped. */
- memcpy(fdtv->avc_data, data, 8);
-
- ret = fdtv_lock(fdtv, addr, fdtv->avc_data);
+ ret = fdtv_lock(fdtv, addr, data);
if (ret < 0)
dev_err(fdtv->device, "CMP: lock I/O error\n");
- else
- memcpy(data, fdtv->avc_data, 8);
-
- mutex_unlock(&fdtv->avc_mutex);
return ret;
}
diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c
index 8022b74..864b627 100644
--- a/drivers/media/dvb/firewire/firedtv-fw.c
+++ b/drivers/media/dvb/firewire/firedtv-fw.c
@@ -125,6 +125,7 @@
i = (i + 1) & (N_PACKETS - 1);
}
+ fw_iso_context_queue_flush(ctx->context);
ctx->current_packet = i;
}
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index ccc2d1a..6927c72 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -1520,6 +1520,7 @@
if (dev->ci.en && (io & NGENE_IO_TSOUT)) {
dvb_ca_en50221_init(adapter, dev->ci.en, 0, 1);
set_transfer(chan, 1);
+ chan->dev->channel[2].DataFormatFlags = DF_SWAP32;
set_transfer(&chan->dev->channel[2], 1);
dvb_register_device(adapter, &chan->ci_dev,
&ngene_dvbdev_ci, (void *) chan,
diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
index 585680f..b1193df 100644
--- a/drivers/media/radio/saa7706h.c
+++ b/drivers/media/radio/saa7706h.c
@@ -376,7 +376,7 @@
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c
index 7c0d777..0991e19 100644
--- a/drivers/media/radio/tef6862.c
+++ b/drivers/media/radio/tef6862.c
@@ -176,7 +176,7 @@
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct tef6862_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tef6862_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
state->freq = TEF6862_LO_FREQ;
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index ebd68ed..8fc0f08 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -46,7 +46,7 @@
#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
#define MOD_NAME "imon"
-#define MOD_VERSION "0.9.2"
+#define MOD_VERSION "0.9.3"
#define DISPLAY_MINOR_BASE 144
#define DEVICE_NAME "lcd%d"
@@ -460,8 +460,9 @@
}
/**
- * Sends a packet to the device -- this function must be called
- * with ictx->lock held.
+ * Sends a packet to the device -- this function must be called with
+ * ictx->lock held, or its unlock/lock sequence while waiting for tx
+ * to complete can/will lead to a deadlock.
*/
static int send_packet(struct imon_context *ictx)
{
@@ -991,12 +992,21 @@
* the iMON remotes, and those used by the Windows MCE remotes (which is
* really just RC-6), but only one or the other at a time, as the signals
* are decoded onboard the receiver.
+ *
+ * This function gets called two different ways, one way is from
+ * rc_register_device, for initial protocol selection/setup, and the other is
+ * via a userspace-initiated protocol change request, either by direct sysfs
+ * prodding or by something like ir-keytable. In the rc_register_device case,
+ * the imon context lock is already held, but when initiated from userspace,
+ * it is not, so we must acquire it prior to calling send_packet, which
+ * requires that the lock is held.
*/
static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
{
int retval;
struct imon_context *ictx = rc->priv;
struct device *dev = ictx->dev;
+ bool unlock = false;
unsigned char ir_proto_packet[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
@@ -1029,6 +1039,11 @@
memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
+ if (!mutex_is_locked(&ictx->lock)) {
+ unlock = true;
+ mutex_lock(&ictx->lock);
+ }
+
retval = send_packet(ictx);
if (retval)
goto out;
@@ -1037,6 +1052,9 @@
ictx->pad_mouse = false;
out:
+ if (unlock)
+ mutex_unlock(&ictx->lock);
+
return retval;
}
@@ -2134,6 +2152,7 @@
goto rdev_setup_failed;
}
+ mutex_unlock(&ictx->lock);
return ictx;
rdev_setup_failed:
@@ -2205,6 +2224,7 @@
goto urb_submit_failed;
}
+ mutex_unlock(&ictx->lock);
return ictx;
urb_submit_failed:
@@ -2299,6 +2319,8 @@
usb_set_intfdata(interface, ictx);
if (ifnum == 0) {
+ mutex_lock(&ictx->lock);
+
if (product == 0xffdc && ictx->rf_device) {
sysfs_err = sysfs_create_group(&interface->dev.kobj,
&imon_rf_attr_group);
@@ -2309,13 +2331,14 @@
if (ictx->display_supported)
imon_init_display(ictx, interface);
+
+ mutex_unlock(&ictx->lock);
}
dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
"usb<%d:%d> initialized\n", vendor, product, ifnum,
usbdev->bus->busnum, usbdev->devnum);
- mutex_unlock(&ictx->lock);
mutex_unlock(&driver_lock);
return 0;
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index accaf6c..43908a7 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -36,6 +36,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/bitops.h>
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 044fb7a..0c273ec 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -220,6 +220,8 @@
{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
+ /* Philips IR transceiver (Dell branded) */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x2093) },
/* Realtek MCE IR Receiver and card reader */
{ USB_DEVICE(VENDOR_REALTEK, 0x0161),
.driver_info = MULTIFUNCTION },
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f53f9c6..a270664 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -707,7 +707,8 @@
{
struct rc_dev *rdev = input_get_drvdata(idev);
- rdev->close(rdev);
+ if (rdev)
+ rdev->close(rdev);
}
/* class for /sys/class/rc */
@@ -733,6 +734,7 @@
{ RC_TYPE_SONY, "sony" },
{ RC_TYPE_RC5_SZ, "rc-5-sz" },
{ RC_TYPE_LIRC, "lirc" },
+ { RC_TYPE_OTHER, "other" },
};
#define PROTO_NONE "none"
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index c820e2f..3f44200 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -524,7 +524,7 @@
for (todo = 32; todo > 0; todo -= bits) {
ev.pulse = samples & 0x80000000 ? false : true;
bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
- ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
+ ev.duration = (bits * (NSEC_PER_SEC / 1000)) / ir_samplerate;
ir_raw_event_store_with_filter(ir->dev, &ev);
samples <<= bits;
}
diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c
index 5e1c9a8..303ffa7 100644
--- a/drivers/media/video/m52790.c
+++ b/drivers/media/video/m52790.c
@@ -174,7 +174,7 @@
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct m52790_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 3973f9a..ddb4c09 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -136,11 +136,50 @@
}
EXPORT_SYMBOL(soc_camera_apply_sensor_flags);
+#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
+ ((x) >> 24) & 0xff
+
+static int soc_camera_try_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ int ret;
+
+ dev_dbg(&icd->dev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
+ pixfmtstr(pix->pixelformat), pix->width, pix->height);
+
+ pix->bytesperline = 0;
+ pix->sizeimage = 0;
+
+ ret = ici->ops->try_fmt(icd, f);
+ if (ret < 0)
+ return ret;
+
+ if (!pix->sizeimage) {
+ if (!pix->bytesperline) {
+ const struct soc_camera_format_xlate *xlate;
+
+ xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+ if (!xlate)
+ return -EINVAL;
+
+ ret = soc_mbus_bytes_per_line(pix->width,
+ xlate->host_fmt);
+ if (ret > 0)
+ pix->bytesperline = ret;
+ }
+ if (pix->bytesperline)
+ pix->sizeimage = pix->bytesperline * pix->height;
+ }
+
+ return 0;
+}
+
static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
WARN_ON(priv != file->private_data);
@@ -149,7 +188,7 @@
return -EINVAL;
/* limit format to hardware capabilities */
- return ici->ops->try_fmt(icd, f);
+ return soc_camera_try_fmt(icd, f);
}
static int soc_camera_enum_input(struct file *file, void *priv,
@@ -362,9 +401,6 @@
icd->user_formats = NULL;
}
-#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
- ((x) >> 24) & 0xff
-
/* Called with .vb_lock held, or from the first open(2), see comment there */
static int soc_camera_set_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
@@ -377,7 +413,7 @@
pixfmtstr(pix->pixelformat), pix->width, pix->height);
/* We always call try_fmt() before set_fmt() or set_crop() */
- ret = ici->ops->try_fmt(icd, f);
+ ret = soc_camera_try_fmt(icd, f);
if (ret < 0)
return ret;
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index 5d4cf3b..22fa820 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -171,7 +171,7 @@
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+ sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
if (sd == NULL)
return -ENOMEM;
v4l2_i2c_subdev_init(sd, client, &tda9840_ops);
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 19621ed5..827425c 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -152,7 +152,7 @@
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+ sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
if (sd == NULL)
return -ENOMEM;
v4l2_i2c_subdev_init(sd, client, &tea6415c_ops);
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 5ea8404..f350b6c 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -125,7 +125,7 @@
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+ sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
if (sd == NULL)
return -ENOMEM;
v4l2_i2c_subdev_init(sd, client, &tea6420_ops);
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
index f8138c7..1aab96a 100644
--- a/drivers/media/video/upd64031a.c
+++ b/drivers/media/video/upd64031a.c
@@ -230,7 +230,7 @@
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
index 28e0e6b..9bbe617 100644
--- a/drivers/media/video/upd64083.c
+++ b/drivers/media/video/upd64083.c
@@ -202,7 +202,7 @@
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 5aeaf87..4aae501 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -155,8 +155,10 @@
sd->v4l2_dev = v4l2_dev;
if (sd->internal_ops && sd->internal_ops->registered) {
err = sd->internal_ops->registered(sd);
- if (err)
+ if (err) {
+ module_put(sd->owner);
return err;
+ }
}
/* This just returns 0 if either of the two args is NULL */
@@ -164,6 +166,7 @@
if (err) {
if (sd->internal_ops && sd->internal_ops->unregistered)
sd->internal_ops->unregistered(sd);
+ module_put(sd->owner);
return err;
}
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 0b80644..812729e 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -155,25 +155,25 @@
switch (cmd) {
case VIDIOC_QUERYCTRL:
- return v4l2_subdev_queryctrl(sd, arg);
+ return v4l2_queryctrl(sd->ctrl_handler, arg);
case VIDIOC_QUERYMENU:
- return v4l2_subdev_querymenu(sd, arg);
+ return v4l2_querymenu(sd->ctrl_handler, arg);
case VIDIOC_G_CTRL:
- return v4l2_subdev_g_ctrl(sd, arg);
+ return v4l2_g_ctrl(sd->ctrl_handler, arg);
case VIDIOC_S_CTRL:
- return v4l2_subdev_s_ctrl(sd, arg);
+ return v4l2_s_ctrl(sd->ctrl_handler, arg);
case VIDIOC_G_EXT_CTRLS:
- return v4l2_subdev_g_ext_ctrls(sd, arg);
+ return v4l2_g_ext_ctrls(sd->ctrl_handler, arg);
case VIDIOC_S_EXT_CTRLS:
- return v4l2_subdev_s_ext_ctrls(sd, arg);
+ return v4l2_s_ext_ctrls(sd->ctrl_handler, arg);
case VIDIOC_TRY_EXT_CTRLS:
- return v4l2_subdev_try_ext_ctrls(sd, arg);
+ return v4l2_try_ext_ctrls(sd->ctrl_handler, arg);
case VIDIOC_DQEVENT:
if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS))
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 1735c84..fe90233 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.18"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.18"
+#define MPT_LINUX_VERSION_COMMON "3.04.19"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.19"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 66f94125..7596aec 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -5012,7 +5012,6 @@
(ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)) {
VirtTarget *vtarget = NULL;
u8 id, channel;
- u32 log_info = le32_to_cpu(reply->IOCLogInfo);
id = sas_event_data->TargetID;
channel = sas_event_data->Bus;
@@ -5023,7 +5022,8 @@
"LogInfo (0x%x) available for "
"INTERNAL_DEVICE_RESET"
"fw_id %d fw_channel %d\n", ioc->name,
- log_info, id, channel));
+ le32_to_cpu(reply->IOCLogInfo),
+ id, channel));
if (vtarget->raidVolume) {
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Skipping Raid Volume for inDMD\n",
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 0d9b82a..a1d4ee6 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1415,11 +1415,8 @@
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
ioc->name, SCpnt, done));
- if (ioc->taskmgmt_quiesce_io) {
- dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
- ioc->name, SCpnt));
+ if (ioc->taskmgmt_quiesce_io)
return SCSI_MLQUEUE_HOST_BUSY;
- }
/*
* Put together a MPT SCSI request...
@@ -1773,7 +1770,6 @@
int scpnt_idx;
int retval;
VirtDevice *vdevice;
- ulong sn = SCpnt->serial_number;
MPT_ADAPTER *ioc;
/* If we can't locate our host adapter structure, return FAILED status.
@@ -1859,8 +1855,7 @@
vdevice->vtarget->id, vdevice->lun,
ctx2abort, mptscsih_get_tm_timeout(ioc));
- if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
- SCpnt->serial_number == sn) {
+ if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"task abort: command still in active list! (sc=%p)\n",
ioc->name, SCpnt));
@@ -1873,9 +1868,9 @@
}
out:
- printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p) (sn=%ld)\n",
+ printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
- SCpnt, SCpnt->serial_number);
+ SCpnt);
return retval;
}
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 6d9568d..8f61ba6 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -867,6 +867,10 @@
struct _x_config_parms cfg;
struct _CONFIG_PAGE_HEADER hdr;
int err = -EBUSY;
+ u32 nego_parms;
+ u32 period;
+ struct scsi_device *sdev;
+ int i;
/* don't allow updating nego parameters on RAID devices */
if (starget->channel == 0 &&
@@ -904,6 +908,24 @@
pg1->Header.PageNumber = hdr.PageNumber;
pg1->Header.PageType = hdr.PageType;
+ nego_parms = le32_to_cpu(pg1->RequestedParameters);
+ period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >>
+ MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD;
+ if (period == 8) {
+ /* Turn on inline data padding for TAPE when running U320 */
+ for (i = 0 ; i < 16; i++) {
+ sdev = scsi_device_lookup_by_target(starget, i);
+ if (sdev && sdev->type == TYPE_TAPE) {
+ sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT
+ "IDP:ON\n", ioc->name);
+ nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP;
+ pg1->RequestedParameters =
+ cpu_to_le32(nego_parms);
+ break;
+ }
+ }
+ }
+
mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
if (mpt_config(ioc, &cfg)) {
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 643ad52..4796bbf 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -1000,7 +1000,6 @@
gd->major = I2O_MAJOR;
gd->queue = queue;
gd->fops = &i2o_block_fops;
- gd->events = DISK_EVENT_MEDIA_CHANGE;
gd->private_data = dev;
dev->gd = gd;
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index f003957..74fbe56 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -361,7 +361,7 @@
*/
error = le32_to_cpu(msg->body[0]);
- osm_debug("Completed %ld\n", cmd->serial_number);
+ osm_debug("Completed %0x%p\n", cmd);
cmd->result = error & 0xff;
/*
@@ -678,7 +678,7 @@
/* Queue the message */
i2o_msg_post(c, msg);
- osm_debug("Issued %ld\n", SCpnt->serial_number);
+ osm_debug("Issued %0x%p\n", SCpnt);
return 0;
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index d4a851c..0b4d5b2 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -144,7 +144,7 @@
int iter, i;
unsigned long flags;
- data->chip->irq_ack(irq_data);
+ data->chip->irq_ack(data);
for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
u32 status;
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 53450f4..3ab9ffa 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -25,7 +25,6 @@
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
#include <plat/usb.h>
#define USBHS_DRIVER_NAME "usbhs-omap"
@@ -700,8 +699,7 @@
dev_dbg(dev, "starting TI HSUSB Controller\n");
if (!pdata) {
dev_dbg(dev, "missing platform_data\n");
- ret = -ENODEV;
- goto end_enable;
+ return -ENODEV;
}
spin_lock_irqsave(&omap->lock, flags);
@@ -719,14 +717,14 @@
gpio_request(pdata->ehci_data->reset_gpio_port[0],
"USB1 PHY reset");
gpio_direction_output
- (pdata->ehci_data->reset_gpio_port[0], 1);
+ (pdata->ehci_data->reset_gpio_port[0], 0);
}
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
gpio_request(pdata->ehci_data->reset_gpio_port[1],
"USB2 PHY reset");
gpio_direction_output
- (pdata->ehci_data->reset_gpio_port[1], 1);
+ (pdata->ehci_data->reset_gpio_port[1], 0);
}
/* Hold the PHY in RESET for enough time till DIR is high */
@@ -906,16 +904,17 @@
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_set_value
- (pdata->ehci_data->reset_gpio_port[0], 0);
+ (pdata->ehci_data->reset_gpio_port[0], 1);
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_set_value
- (pdata->ehci_data->reset_gpio_port[1], 0);
+ (pdata->ehci_data->reset_gpio_port[1], 1);
}
end_count:
omap->count++;
- goto end_enable;
+ spin_unlock_irqrestore(&omap->lock, flags);
+ return 0;
err_tll:
if (pdata->ehci_data->phy_reset) {
@@ -931,8 +930,6 @@
clk_disable(omap->usbhost_fs_fck);
clk_disable(omap->usbhost_hs_fck);
clk_disable(omap->usbhost_ick);
-
-end_enable:
spin_unlock_irqrestore(&omap->lock, flags);
return ret;
}
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 16422de0..2c0d4d1 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -447,12 +447,13 @@
if (err)
goto out;
}
- if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+ if (tscript->flags & TWL4030_SLEEP_SCRIPT) {
if (order)
pr_warning("TWL4030: Bad order of scripts (sleep "\
"script before wakeup) Leads to boot"\
"failure on some boards\n");
err = twl4030_config_sleep_sequence(address);
+ }
out:
return err;
}
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e007c6..d80dcde 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -481,5 +481,6 @@
source "drivers/misc/iwmc3200top/Kconfig"
source "drivers/misc/ti-st/Kconfig"
source "drivers/misc/lis3lv02d/Kconfig"
+source "drivers/misc/carma/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f546860..848e846 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -44,3 +44,4 @@
obj-y += ti-st/
obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o
obj-y += lis3lv02d/
+obj-y += carma/
diff --git a/drivers/misc/carma/Kconfig b/drivers/misc/carma/Kconfig
new file mode 100644
index 0000000..c90370e
--- /dev/null
+++ b/drivers/misc/carma/Kconfig
@@ -0,0 +1,17 @@
+config CARMA_FPGA
+ tristate "CARMA DATA-FPGA Access Driver"
+ depends on FSL_SOC && PPC_83xx && MEDIA_SUPPORT && HAS_DMA && FSL_DMA
+ select VIDEOBUF_DMA_SG
+ default n
+ help
+ Say Y here to include support for communicating with the data
+ processing FPGAs on the OVRO CARMA board.
+
+config CARMA_FPGA_PROGRAM
+ tristate "CARMA DATA-FPGA Programmer"
+ depends on FSL_SOC && PPC_83xx && MEDIA_SUPPORT && HAS_DMA && FSL_DMA
+ select VIDEOBUF_DMA_SG
+ default n
+ help
+ Say Y here to include support for programming the data processing
+ FPGAs on the OVRO CARMA board.
diff --git a/drivers/misc/carma/Makefile b/drivers/misc/carma/Makefile
new file mode 100644
index 0000000..ff36ac2
--- /dev/null
+++ b/drivers/misc/carma/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CARMA_FPGA) += carma-fpga.o
+obj-$(CONFIG_CARMA_FPGA_PROGRAM) += carma-fpga-program.o
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
new file mode 100644
index 0000000..7ce6065
--- /dev/null
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -0,0 +1,1141 @@
+/*
+ * CARMA Board DATA-FPGA Programmer
+ *
+ * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/completion.h>
+#include <linux/miscdevice.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+#include <media/videobuf-dma-sg.h>
+
+/* MPC8349EMDS specific get_immrbase() */
+#include <sysdev/fsl_soc.h>
+
+static const char drv_name[] = "carma-fpga-program";
+
+/*
+ * Firmware images are always this exact size
+ *
+ * 12849552 bytes for a CARMA Digitizer Board (EP2S90 FPGAs)
+ * 18662880 bytes for a CARMA Correlator Board (EP2S130 FPGAs)
+ */
+#define FW_SIZE_EP2S90 12849552
+#define FW_SIZE_EP2S130 18662880
+
+struct fpga_dev {
+ struct miscdevice miscdev;
+
+ /* Reference count */
+ struct kref ref;
+
+ /* Device Registers */
+ struct device *dev;
+ void __iomem *regs;
+ void __iomem *immr;
+
+ /* Freescale DMA Device */
+ struct dma_chan *chan;
+
+ /* Interrupts */
+ int irq, status;
+ struct completion completion;
+
+ /* FPGA Bitfile */
+ struct mutex lock;
+
+ struct videobuf_dmabuf vb;
+ bool vb_allocated;
+
+ /* max size and written bytes */
+ size_t fw_size;
+ size_t bytes;
+};
+
+/*
+ * FPGA Bitfile Helpers
+ */
+
+/**
+ * fpga_drop_firmware_data() - drop the bitfile image from memory
+ * @priv: the driver's private data structure
+ *
+ * LOCKING: must hold priv->lock
+ */
+static void fpga_drop_firmware_data(struct fpga_dev *priv)
+{
+ videobuf_dma_free(&priv->vb);
+ priv->vb_allocated = false;
+ priv->bytes = 0;
+}
+
+/*
+ * Private Data Reference Count
+ */
+
+static void fpga_dev_remove(struct kref *ref)
+{
+ struct fpga_dev *priv = container_of(ref, struct fpga_dev, ref);
+
+ /* free any firmware image that was not programmed */
+ fpga_drop_firmware_data(priv);
+
+ mutex_destroy(&priv->lock);
+ kfree(priv);
+}
+
+/*
+ * LED Trigger (could be a seperate module)
+ */
+
+/*
+ * NOTE: this whole thing does have the problem that whenever the led's are
+ * NOTE: first set to use the fpga trigger, they could be in the wrong state
+ */
+
+DEFINE_LED_TRIGGER(ledtrig_fpga);
+
+static void ledtrig_fpga_programmed(bool enabled)
+{
+ if (enabled)
+ led_trigger_event(ledtrig_fpga, LED_FULL);
+ else
+ led_trigger_event(ledtrig_fpga, LED_OFF);
+}
+
+/*
+ * FPGA Register Helpers
+ */
+
+/* Register Definitions */
+#define FPGA_CONFIG_CONTROL 0x40
+#define FPGA_CONFIG_STATUS 0x44
+#define FPGA_CONFIG_FIFO_SIZE 0x48
+#define FPGA_CONFIG_FIFO_USED 0x4C
+#define FPGA_CONFIG_TOTAL_BYTE_COUNT 0x50
+#define FPGA_CONFIG_CUR_BYTE_COUNT 0x54
+
+#define FPGA_FIFO_ADDRESS 0x3000
+
+static int fpga_fifo_size(void __iomem *regs)
+{
+ return ioread32be(regs + FPGA_CONFIG_FIFO_SIZE);
+}
+
+#define CFG_STATUS_ERR_MASK 0xfffe
+
+static int fpga_config_error(void __iomem *regs)
+{
+ return ioread32be(regs + FPGA_CONFIG_STATUS) & CFG_STATUS_ERR_MASK;
+}
+
+static int fpga_fifo_empty(void __iomem *regs)
+{
+ return ioread32be(regs + FPGA_CONFIG_FIFO_USED) == 0;
+}
+
+static void fpga_fifo_write(void __iomem *regs, u32 val)
+{
+ iowrite32be(val, regs + FPGA_FIFO_ADDRESS);
+}
+
+static void fpga_set_byte_count(void __iomem *regs, u32 count)
+{
+ iowrite32be(count, regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
+}
+
+#define CFG_CTL_ENABLE (1 << 0)
+#define CFG_CTL_RESET (1 << 1)
+#define CFG_CTL_DMA (1 << 2)
+
+static void fpga_programmer_enable(struct fpga_dev *priv, bool dma)
+{
+ u32 val;
+
+ val = (dma) ? (CFG_CTL_ENABLE | CFG_CTL_DMA) : CFG_CTL_ENABLE;
+ iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
+}
+
+static void fpga_programmer_disable(struct fpga_dev *priv)
+{
+ iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
+}
+
+static void fpga_dump_registers(struct fpga_dev *priv)
+{
+ u32 control, status, size, used, total, curr;
+
+ /* good status: do nothing */
+ if (priv->status == 0)
+ return;
+
+ /* Dump all status registers */
+ control = ioread32be(priv->regs + FPGA_CONFIG_CONTROL);
+ status = ioread32be(priv->regs + FPGA_CONFIG_STATUS);
+ size = ioread32be(priv->regs + FPGA_CONFIG_FIFO_SIZE);
+ used = ioread32be(priv->regs + FPGA_CONFIG_FIFO_USED);
+ total = ioread32be(priv->regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
+ curr = ioread32be(priv->regs + FPGA_CONFIG_CUR_BYTE_COUNT);
+
+ dev_err(priv->dev, "Configuration failed, dumping status registers\n");
+ dev_err(priv->dev, "Control: 0x%.8x\n", control);
+ dev_err(priv->dev, "Status: 0x%.8x\n", status);
+ dev_err(priv->dev, "FIFO Size: 0x%.8x\n", size);
+ dev_err(priv->dev, "FIFO Used: 0x%.8x\n", used);
+ dev_err(priv->dev, "FIFO Total: 0x%.8x\n", total);
+ dev_err(priv->dev, "FIFO Curr: 0x%.8x\n", curr);
+}
+
+/*
+ * FPGA Power Supply Code
+ */
+
+#define CTL_PWR_CONTROL 0x2006
+#define CTL_PWR_STATUS 0x200A
+#define CTL_PWR_FAIL 0x200B
+
+#define PWR_CONTROL_ENABLE 0x01
+
+#define PWR_STATUS_ERROR_MASK 0x10
+#define PWR_STATUS_GOOD 0x0f
+
+/*
+ * Determine if the FPGA power is good for all supplies
+ */
+static bool fpga_power_good(struct fpga_dev *priv)
+{
+ u8 val;
+
+ val = ioread8(priv->regs + CTL_PWR_STATUS);
+ if (val & PWR_STATUS_ERROR_MASK)
+ return false;
+
+ return val == PWR_STATUS_GOOD;
+}
+
+/*
+ * Disable the FPGA power supplies
+ */
+static void fpga_disable_power_supplies(struct fpga_dev *priv)
+{
+ unsigned long start;
+ u8 val;
+
+ iowrite8(0x0, priv->regs + CTL_PWR_CONTROL);
+
+ /*
+ * Wait 500ms for the power rails to discharge
+ *
+ * Without this delay, the CTL-CPLD state machine can get into a
+ * state where it is waiting for the power-goods to assert, but they
+ * never do. This only happens when enabling and disabling the
+ * power sequencer very rapidly.
+ *
+ * The loop below will also wait for the power goods to de-assert,
+ * but testing has shown that they are always disabled by the time
+ * the sleep completes. However, omitting the sleep and only waiting
+ * for the power-goods to de-assert was not sufficient to ensure
+ * that the power sequencer would not wedge itself.
+ */
+ msleep(500);
+
+ start = jiffies;
+ while (time_before(jiffies, start + HZ)) {
+ val = ioread8(priv->regs + CTL_PWR_STATUS);
+ if (!(val & PWR_STATUS_GOOD))
+ break;
+
+ usleep_range(5000, 10000);
+ }
+
+ val = ioread8(priv->regs + CTL_PWR_STATUS);
+ if (val & PWR_STATUS_GOOD) {
+ dev_err(priv->dev, "power disable failed: "
+ "power goods: status 0x%.2x\n", val);
+ }
+
+ if (val & PWR_STATUS_ERROR_MASK) {
+ dev_err(priv->dev, "power disable failed: "
+ "alarm bit set: status 0x%.2x\n", val);
+ }
+}
+
+/**
+ * fpga_enable_power_supplies() - enable the DATA-FPGA power supplies
+ * @priv: the driver's private data structure
+ *
+ * Enable the DATA-FPGA power supplies, waiting up to 1 second for
+ * them to enable successfully.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int fpga_enable_power_supplies(struct fpga_dev *priv)
+{
+ unsigned long start = jiffies;
+
+ if (fpga_power_good(priv)) {
+ dev_dbg(priv->dev, "power was already good\n");
+ return 0;
+ }
+
+ iowrite8(PWR_CONTROL_ENABLE, priv->regs + CTL_PWR_CONTROL);
+ while (time_before(jiffies, start + HZ)) {
+ if (fpga_power_good(priv))
+ return 0;
+
+ usleep_range(5000, 10000);
+ }
+
+ return fpga_power_good(priv) ? 0 : -ETIMEDOUT;
+}
+
+/*
+ * Determine if the FPGA power supplies are all enabled
+ */
+static bool fpga_power_enabled(struct fpga_dev *priv)
+{
+ u8 val;
+
+ val = ioread8(priv->regs + CTL_PWR_CONTROL);
+ if (val & PWR_CONTROL_ENABLE)
+ return true;
+
+ return false;
+}
+
+/*
+ * Determine if the FPGA's are programmed and running correctly
+ */
+static bool fpga_running(struct fpga_dev *priv)
+{
+ if (!fpga_power_good(priv))
+ return false;
+
+ /* Check the config done bit */
+ return ioread32be(priv->regs + FPGA_CONFIG_STATUS) & (1 << 18);
+}
+
+/*
+ * FPGA Programming Code
+ */
+
+/**
+ * fpga_program_block() - put a block of data into the programmer's FIFO
+ * @priv: the driver's private data structure
+ * @buf: the data to program
+ * @count: the length of data to program (must be a multiple of 4 bytes)
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int fpga_program_block(struct fpga_dev *priv, void *buf, size_t count)
+{
+ u32 *data = buf;
+ int size = fpga_fifo_size(priv->regs);
+ int i, len;
+ unsigned long timeout;
+
+ /* enforce correct data length for the FIFO */
+ BUG_ON(count % 4 != 0);
+
+ while (count > 0) {
+
+ /* Get the size of the block to write (maximum is FIFO_SIZE) */
+ len = min_t(size_t, count, size);
+ timeout = jiffies + HZ / 4;
+
+ /* Write the block */
+ for (i = 0; i < len / 4; i++)
+ fpga_fifo_write(priv->regs, data[i]);
+
+ /* Update the amounts left */
+ count -= len;
+ data += len / 4;
+
+ /* Wait for the fifo to empty */
+ while (true) {
+
+ if (fpga_fifo_empty(priv->regs)) {
+ break;
+ } else {
+ dev_dbg(priv->dev, "Fifo not empty\n");
+ cpu_relax();
+ }
+
+ if (fpga_config_error(priv->regs)) {
+ dev_err(priv->dev, "Error detected\n");
+ return -EIO;
+ }
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(priv->dev, "Fifo drain timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ usleep_range(5000, 10000);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * fpga_program_cpu() - program the DATA-FPGA's using the CPU
+ * @priv: the driver's private data structure
+ *
+ * This is useful when the DMA programming method fails. It is possible to
+ * wedge the Freescale DMA controller such that the DMA programming method
+ * always fails. This method has always succeeded.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static noinline int fpga_program_cpu(struct fpga_dev *priv)
+{
+ int ret;
+
+ /* Disable the programmer */
+ fpga_programmer_disable(priv);
+
+ /* Set the total byte count */
+ fpga_set_byte_count(priv->regs, priv->bytes);
+ dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
+
+ /* Enable the controller for programming */
+ fpga_programmer_enable(priv, false);
+ dev_dbg(priv->dev, "enabled the controller\n");
+
+ /* Write each chunk of the FPGA bitfile to FPGA programmer */
+ ret = fpga_program_block(priv, priv->vb.vaddr, priv->bytes);
+ if (ret)
+ goto out_disable_controller;
+
+ /* Wait for the interrupt handler to signal that programming finished */
+ ret = wait_for_completion_timeout(&priv->completion, 2 * HZ);
+ if (!ret) {
+ dev_err(priv->dev, "Timed out waiting for completion\n");
+ ret = -ETIMEDOUT;
+ goto out_disable_controller;
+ }
+
+ /* Retrieve the status from the interrupt handler */
+ ret = priv->status;
+
+out_disable_controller:
+ fpga_programmer_disable(priv);
+ return ret;
+}
+
+#define FIFO_DMA_ADDRESS 0xf0003000
+#define FIFO_MAX_LEN 4096
+
+/**
+ * fpga_program_dma() - program the DATA-FPGA's using the DMA engine
+ * @priv: the driver's private data structure
+ *
+ * Program the DATA-FPGA's using the Freescale DMA engine. This requires that
+ * the engine is programmed such that the hardware DMA request lines can
+ * control the entire DMA transaction. The system controller FPGA then
+ * completely offloads the programming from the CPU.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static noinline int fpga_program_dma(struct fpga_dev *priv)
+{
+ struct videobuf_dmabuf *vb = &priv->vb;
+ struct dma_chan *chan = priv->chan;
+ struct dma_async_tx_descriptor *tx;
+ size_t num_pages, len, avail = 0;
+ struct dma_slave_config config;
+ struct scatterlist *sg;
+ struct sg_table table;
+ dma_cookie_t cookie;
+ int ret, i;
+
+ /* Disable the programmer */
+ fpga_programmer_disable(priv);
+
+ /* Allocate a scatterlist for the DMA destination */
+ num_pages = DIV_ROUND_UP(priv->bytes, FIFO_MAX_LEN);
+ ret = sg_alloc_table(&table, num_pages, GFP_KERNEL);
+ if (ret) {
+ dev_err(priv->dev, "Unable to allocate dst scatterlist\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ /*
+ * This is an ugly hack
+ *
+ * We fill in a scatterlist as if it were mapped for DMA. This is
+ * necessary because there exists no better structure for this
+ * inside the kernel code.
+ *
+ * As an added bonus, we can use the DMAEngine API for all of this,
+ * rather than inventing another extremely similar API.
+ */
+ avail = priv->bytes;
+ for_each_sg(table.sgl, sg, num_pages, i) {
+ len = min_t(size_t, avail, FIFO_MAX_LEN);
+ sg_dma_address(sg) = FIFO_DMA_ADDRESS;
+ sg_dma_len(sg) = len;
+
+ avail -= len;
+ }
+
+ /* Map the buffer for DMA */
+ ret = videobuf_dma_map(priv->dev, &priv->vb);
+ if (ret) {
+ dev_err(priv->dev, "Unable to map buffer for DMA\n");
+ goto out_free_table;
+ }
+
+ /*
+ * Configure the DMA channel to transfer FIFO_SIZE / 2 bytes per
+ * transaction, and then put it under external control
+ */
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_TO_DEVICE;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_maxburst = fpga_fifo_size(priv->regs) / 2 / 4;
+ ret = chan->device->device_control(chan, DMA_SLAVE_CONFIG,
+ (unsigned long)&config);
+ if (ret) {
+ dev_err(priv->dev, "DMA slave configuration failed\n");
+ goto out_dma_unmap;
+ }
+
+ ret = chan->device->device_control(chan, FSLDMA_EXTERNAL_START, 1);
+ if (ret) {
+ dev_err(priv->dev, "DMA external control setup failed\n");
+ goto out_dma_unmap;
+ }
+
+ /* setup and submit the DMA transaction */
+ tx = chan->device->device_prep_dma_sg(chan,
+ table.sgl, num_pages,
+ vb->sglist, vb->sglen, 0);
+ if (!tx) {
+ dev_err(priv->dev, "Unable to prep DMA transaction\n");
+ ret = -ENOMEM;
+ goto out_dma_unmap;
+ }
+
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(priv->dev, "Unable to submit DMA transaction\n");
+ ret = -ENOMEM;
+ goto out_dma_unmap;
+ }
+
+ dma_async_memcpy_issue_pending(chan);
+
+ /* Set the total byte count */
+ fpga_set_byte_count(priv->regs, priv->bytes);
+ dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
+
+ /* Enable the controller for DMA programming */
+ fpga_programmer_enable(priv, true);
+ dev_dbg(priv->dev, "enabled the controller\n");
+
+ /* Wait for the interrupt handler to signal that programming finished */
+ ret = wait_for_completion_timeout(&priv->completion, 2 * HZ);
+ if (!ret) {
+ dev_err(priv->dev, "Timed out waiting for completion\n");
+ ret = -ETIMEDOUT;
+ goto out_disable_controller;
+ }
+
+ /* Retrieve the status from the interrupt handler */
+ ret = priv->status;
+
+out_disable_controller:
+ fpga_programmer_disable(priv);
+out_dma_unmap:
+ videobuf_dma_unmap(priv->dev, vb);
+out_free_table:
+ sg_free_table(&table);
+out_return:
+ return ret;
+}
+
+/*
+ * Interrupt Handling
+ */
+
+static irqreturn_t fpga_irq(int irq, void *dev_id)
+{
+ struct fpga_dev *priv = dev_id;
+
+ /* Save the status */
+ priv->status = fpga_config_error(priv->regs) ? -EIO : 0;
+ dev_dbg(priv->dev, "INTERRUPT status %d\n", priv->status);
+ fpga_dump_registers(priv);
+
+ /* Disabling the programmer clears the interrupt */
+ fpga_programmer_disable(priv);
+
+ /* Notify any waiters */
+ complete(&priv->completion);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * SYSFS Helpers
+ */
+
+/**
+ * fpga_do_stop() - deconfigure (reset) the DATA-FPGA's
+ * @priv: the driver's private data structure
+ *
+ * LOCKING: must hold priv->lock
+ */
+static int fpga_do_stop(struct fpga_dev *priv)
+{
+ u32 val;
+
+ /* Set the led to unprogrammed */
+ ledtrig_fpga_programmed(false);
+
+ /* Pulse the config line to reset the FPGA's */
+ val = CFG_CTL_ENABLE | CFG_CTL_RESET;
+ iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
+ iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
+
+ return 0;
+}
+
+static noinline int fpga_do_program(struct fpga_dev *priv)
+{
+ int ret;
+
+ if (priv->bytes != priv->fw_size) {
+ dev_err(priv->dev, "Incorrect bitfile size: got %zu bytes, "
+ "should be %zu bytes\n",
+ priv->bytes, priv->fw_size);
+ return -EINVAL;
+ }
+
+ if (!fpga_power_enabled(priv)) {
+ dev_err(priv->dev, "Power not enabled\n");
+ return -EINVAL;
+ }
+
+ if (!fpga_power_good(priv)) {
+ dev_err(priv->dev, "Power not good\n");
+ return -EINVAL;
+ }
+
+ /* Set the LED to unprogrammed */
+ ledtrig_fpga_programmed(false);
+
+ /* Try to program the FPGA's using DMA */
+ ret = fpga_program_dma(priv);
+
+ /* If DMA failed or doesn't exist, try with CPU */
+ if (ret) {
+ dev_warn(priv->dev, "Falling back to CPU programming\n");
+ ret = fpga_program_cpu(priv);
+ }
+
+ if (ret) {
+ dev_err(priv->dev, "Unable to program FPGA's\n");
+ return ret;
+ }
+
+ /* Drop the firmware bitfile from memory */
+ fpga_drop_firmware_data(priv);
+
+ dev_dbg(priv->dev, "FPGA programming successful\n");
+ ledtrig_fpga_programmed(true);
+
+ return 0;
+}
+
+/*
+ * File Operations
+ */
+
+static int fpga_open(struct inode *inode, struct file *filp)
+{
+ /*
+ * The miscdevice layer puts our struct miscdevice into the
+ * filp->private_data field. We use this to find our private
+ * data and then overwrite it with our own private structure.
+ */
+ struct fpga_dev *priv = container_of(filp->private_data,
+ struct fpga_dev, miscdev);
+ unsigned int nr_pages;
+ int ret;
+
+ /* We only allow one process at a time */
+ ret = mutex_lock_interruptible(&priv->lock);
+ if (ret)
+ return ret;
+
+ filp->private_data = priv;
+ kref_get(&priv->ref);
+
+ /* Truncation: drop any existing data */
+ if (filp->f_flags & O_TRUNC)
+ priv->bytes = 0;
+
+ /* Check if we have already allocated a buffer */
+ if (priv->vb_allocated)
+ return 0;
+
+ /* Allocate a buffer to hold enough data for the bitfile */
+ nr_pages = DIV_ROUND_UP(priv->fw_size, PAGE_SIZE);
+ ret = videobuf_dma_init_kernel(&priv->vb, DMA_TO_DEVICE, nr_pages);
+ if (ret) {
+ dev_err(priv->dev, "unable to allocate data buffer\n");
+ mutex_unlock(&priv->lock);
+ kref_put(&priv->ref, fpga_dev_remove);
+ return ret;
+ }
+
+ priv->vb_allocated = true;
+ return 0;
+}
+
+static int fpga_release(struct inode *inode, struct file *filp)
+{
+ struct fpga_dev *priv = filp->private_data;
+
+ mutex_unlock(&priv->lock);
+ kref_put(&priv->ref, fpga_dev_remove);
+ return 0;
+}
+
+static ssize_t fpga_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct fpga_dev *priv = filp->private_data;
+
+ /* FPGA bitfiles have an exact size: disallow anything else */
+ if (priv->bytes >= priv->fw_size)
+ return -ENOSPC;
+
+ count = min_t(size_t, priv->fw_size - priv->bytes, count);
+ if (copy_from_user(priv->vb.vaddr + priv->bytes, buf, count))
+ return -EFAULT;
+
+ priv->bytes += count;
+ return count;
+}
+
+static ssize_t fpga_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ struct fpga_dev *priv = filp->private_data;
+
+ count = min_t(size_t, priv->bytes - *f_pos, count);
+ if (copy_to_user(buf, priv->vb.vaddr + *f_pos, count))
+ return -EFAULT;
+
+ *f_pos += count;
+ return count;
+}
+
+static loff_t fpga_llseek(struct file *filp, loff_t offset, int origin)
+{
+ struct fpga_dev *priv = filp->private_data;
+ loff_t newpos;
+
+ /* only read-only opens are allowed to seek */
+ if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+ return -EINVAL;
+
+ switch (origin) {
+ case SEEK_SET: /* seek relative to the beginning of the file */
+ newpos = offset;
+ break;
+ case SEEK_CUR: /* seek relative to current position in the file */
+ newpos = filp->f_pos + offset;
+ break;
+ case SEEK_END: /* seek relative to the end of the file */
+ newpos = priv->fw_size - offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* check for sanity */
+ if (newpos > priv->fw_size)
+ return -EINVAL;
+
+ filp->f_pos = newpos;
+ return newpos;
+}
+
+static const struct file_operations fpga_fops = {
+ .open = fpga_open,
+ .release = fpga_release,
+ .write = fpga_write,
+ .read = fpga_read,
+ .llseek = fpga_llseek,
+};
+
+/*
+ * Device Attributes
+ */
+
+static ssize_t pfail_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fpga_dev *priv = dev_get_drvdata(dev);
+ u8 val;
+
+ val = ioread8(priv->regs + CTL_PWR_FAIL);
+ return snprintf(buf, PAGE_SIZE, "0x%.2x\n", val);
+}
+
+static ssize_t pgood_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fpga_dev *priv = dev_get_drvdata(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_good(priv));
+}
+
+static ssize_t penable_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fpga_dev *priv = dev_get_drvdata(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_enabled(priv));
+}
+
+static ssize_t penable_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fpga_dev *priv = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val) {
+ ret = fpga_enable_power_supplies(priv);
+ if (ret)
+ return ret;
+ } else {
+ fpga_do_stop(priv);
+ fpga_disable_power_supplies(priv);
+ }
+
+ return count;
+}
+
+static ssize_t program_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fpga_dev *priv = dev_get_drvdata(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", fpga_running(priv));
+}
+
+static ssize_t program_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fpga_dev *priv = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ /* We can't have an image writer and be programming simultaneously */
+ if (mutex_lock_interruptible(&priv->lock))
+ return -ERESTARTSYS;
+
+ /* Program or Reset the FPGA's */
+ ret = val ? fpga_do_program(priv) : fpga_do_stop(priv);
+ if (ret)
+ goto out_unlock;
+
+ /* Success */
+ ret = count;
+
+out_unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static DEVICE_ATTR(power_fail, S_IRUGO, pfail_show, NULL);
+static DEVICE_ATTR(power_good, S_IRUGO, pgood_show, NULL);
+static DEVICE_ATTR(power_enable, S_IRUGO | S_IWUSR,
+ penable_show, penable_store);
+
+static DEVICE_ATTR(program, S_IRUGO | S_IWUSR,
+ program_show, program_store);
+
+static struct attribute *fpga_attributes[] = {
+ &dev_attr_power_fail.attr,
+ &dev_attr_power_good.attr,
+ &dev_attr_power_enable.attr,
+ &dev_attr_program.attr,
+ NULL,
+};
+
+static const struct attribute_group fpga_attr_group = {
+ .attrs = fpga_attributes,
+};
+
+/*
+ * OpenFirmware Device Subsystem
+ */
+
+#define SYS_REG_VERSION 0x00
+#define SYS_REG_GEOGRAPHIC 0x10
+
+static bool dma_filter(struct dma_chan *chan, void *data)
+{
+ /*
+ * DMA Channel #0 is the only acceptable device
+ *
+ * This probably won't survive an unload/load cycle of the Freescale
+ * DMAEngine driver, but that won't be a problem
+ */
+ return chan->chan_id == 0 && chan->device->dev_id == 0;
+}
+
+static int fpga_of_remove(struct platform_device *op)
+{
+ struct fpga_dev *priv = dev_get_drvdata(&op->dev);
+ struct device *this_device = priv->miscdev.this_device;
+
+ sysfs_remove_group(&this_device->kobj, &fpga_attr_group);
+ misc_deregister(&priv->miscdev);
+
+ free_irq(priv->irq, priv);
+ irq_dispose_mapping(priv->irq);
+
+ /* make sure the power supplies are off */
+ fpga_disable_power_supplies(priv);
+
+ /* unmap registers */
+ iounmap(priv->immr);
+ iounmap(priv->regs);
+
+ dma_release_channel(priv->chan);
+
+ /* drop our reference to the private data structure */
+ kref_put(&priv->ref, fpga_dev_remove);
+ return 0;
+}
+
+/* CTL-CPLD Version Register */
+#define CTL_CPLD_VERSION 0x2000
+
+static int fpga_of_probe(struct platform_device *op,
+ const struct of_device_id *match)
+{
+ struct device_node *of_node = op->dev.of_node;
+ struct device *this_device;
+ struct fpga_dev *priv;
+ dma_cap_mask_t mask;
+ u32 ver;
+ int ret;
+
+ /* Allocate private data */
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&op->dev, "Unable to allocate private data\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ /* Setup the miscdevice */
+ priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+ priv->miscdev.name = drv_name;
+ priv->miscdev.fops = &fpga_fops;
+
+ kref_init(&priv->ref);
+
+ dev_set_drvdata(&op->dev, priv);
+ priv->dev = &op->dev;
+ mutex_init(&priv->lock);
+ init_completion(&priv->completion);
+ videobuf_dma_init(&priv->vb);
+
+ dev_set_drvdata(priv->dev, priv);
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ dma_cap_set(DMA_INTERRUPT, mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_SG, mask);
+
+ /* Get control of DMA channel #0 */
+ priv->chan = dma_request_channel(mask, dma_filter, NULL);
+ if (!priv->chan) {
+ dev_err(&op->dev, "Unable to acquire DMA channel #0\n");
+ ret = -ENODEV;
+ goto out_free_priv;
+ }
+
+ /* Remap the registers for use */
+ priv->regs = of_iomap(of_node, 0);
+ if (!priv->regs) {
+ dev_err(&op->dev, "Unable to ioremap registers\n");
+ ret = -ENOMEM;
+ goto out_dma_release_channel;
+ }
+
+ /* Remap the IMMR for use */
+ priv->immr = ioremap(get_immrbase(), 0x100000);
+ if (!priv->immr) {
+ dev_err(&op->dev, "Unable to ioremap IMMR\n");
+ ret = -ENOMEM;
+ goto out_unmap_regs;
+ }
+
+ /*
+ * Check that external DMA is configured
+ *
+ * U-Boot does this for us, but we should check it and bail out if
+ * there is a problem. Failing to have this register setup correctly
+ * will cause the DMA controller to transfer a single cacheline
+ * worth of data, then wedge itself.
+ */
+ if ((ioread32be(priv->immr + 0x114) & 0xE00) != 0xE00) {
+ dev_err(&op->dev, "External DMA control not configured\n");
+ ret = -ENODEV;
+ goto out_unmap_immr;
+ }
+
+ /*
+ * Check the CTL-CPLD version
+ *
+ * This driver uses the CTL-CPLD DATA-FPGA power sequencer, and we
+ * don't want to run on any version of the CTL-CPLD that does not use
+ * a compatible register layout.
+ *
+ * v2: changed register layout, added power sequencer
+ * v3: added glitch filter on the i2c overcurrent/overtemp outputs
+ */
+ ver = ioread8(priv->regs + CTL_CPLD_VERSION);
+ if (ver != 0x02 && ver != 0x03) {
+ dev_err(&op->dev, "CTL-CPLD is not version 0x02 or 0x03!\n");
+ ret = -ENODEV;
+ goto out_unmap_immr;
+ }
+
+ /* Set the exact size that the firmware image should be */
+ ver = ioread32be(priv->regs + SYS_REG_VERSION);
+ priv->fw_size = (ver & (1 << 18)) ? FW_SIZE_EP2S130 : FW_SIZE_EP2S90;
+
+ /* Find the correct IRQ number */
+ priv->irq = irq_of_parse_and_map(of_node, 0);
+ if (priv->irq == NO_IRQ) {
+ dev_err(&op->dev, "Unable to find IRQ line\n");
+ ret = -ENODEV;
+ goto out_unmap_immr;
+ }
+
+ /* Request the IRQ */
+ ret = request_irq(priv->irq, fpga_irq, IRQF_SHARED, drv_name, priv);
+ if (ret) {
+ dev_err(&op->dev, "Unable to request IRQ %d\n", priv->irq);
+ ret = -ENODEV;
+ goto out_irq_dispose_mapping;
+ }
+
+ /* Reset and stop the FPGA's, just in case */
+ fpga_do_stop(priv);
+
+ /* Register the miscdevice */
+ ret = misc_register(&priv->miscdev);
+ if (ret) {
+ dev_err(&op->dev, "Unable to register miscdevice\n");
+ goto out_free_irq;
+ }
+
+ /* Create the sysfs files */
+ this_device = priv->miscdev.this_device;
+ dev_set_drvdata(this_device, priv);
+ ret = sysfs_create_group(&this_device->kobj, &fpga_attr_group);
+ if (ret) {
+ dev_err(&op->dev, "Unable to create sysfs files\n");
+ goto out_misc_deregister;
+ }
+
+ dev_info(priv->dev, "CARMA FPGA Programmer: %s rev%s with %s FPGAs\n",
+ (ver & (1 << 17)) ? "Correlator" : "Digitizer",
+ (ver & (1 << 16)) ? "B" : "A",
+ (ver & (1 << 18)) ? "EP2S130" : "EP2S90");
+
+ return 0;
+
+out_misc_deregister:
+ misc_deregister(&priv->miscdev);
+out_free_irq:
+ free_irq(priv->irq, priv);
+out_irq_dispose_mapping:
+ irq_dispose_mapping(priv->irq);
+out_unmap_immr:
+ iounmap(priv->immr);
+out_unmap_regs:
+ iounmap(priv->regs);
+out_dma_release_channel:
+ dma_release_channel(priv->chan);
+out_free_priv:
+ kref_put(&priv->ref, fpga_dev_remove);
+out_return:
+ return ret;
+}
+
+static struct of_device_id fpga_of_match[] = {
+ { .compatible = "carma,fpga-programmer", },
+ {},
+};
+
+static struct of_platform_driver fpga_of_driver = {
+ .probe = fpga_of_probe,
+ .remove = fpga_of_remove,
+ .driver = {
+ .name = drv_name,
+ .of_match_table = fpga_of_match,
+ .owner = THIS_MODULE,
+ },
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init fpga_init(void)
+{
+ led_trigger_register_simple("fpga", &ledtrig_fpga);
+ return of_register_platform_driver(&fpga_of_driver);
+}
+
+static void __exit fpga_exit(void)
+{
+ of_unregister_platform_driver(&fpga_of_driver);
+ led_trigger_unregister_simple(ledtrig_fpga);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("CARMA Board DATA-FPGA Programmer");
+MODULE_LICENSE("GPL");
+
+module_init(fpga_init);
+module_exit(fpga_exit);
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
new file mode 100644
index 0000000..3965821
--- /dev/null
+++ b/drivers/misc/carma/carma-fpga.c
@@ -0,0 +1,1433 @@
+/*
+ * CARMA DATA-FPGA Access Driver
+ *
+ * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * FPGA Memory Dump Format
+ *
+ * FPGA #0 control registers (32 x 32-bit words)
+ * FPGA #1 control registers (32 x 32-bit words)
+ * FPGA #2 control registers (32 x 32-bit words)
+ * FPGA #3 control registers (32 x 32-bit words)
+ * SYSFPGA control registers (32 x 32-bit words)
+ * FPGA #0 correlation array (NUM_CORL0 correlation blocks)
+ * FPGA #1 correlation array (NUM_CORL1 correlation blocks)
+ * FPGA #2 correlation array (NUM_CORL2 correlation blocks)
+ * FPGA #3 correlation array (NUM_CORL3 correlation blocks)
+ *
+ * Each correlation array consists of:
+ *
+ * Correlation Data (2 x NUM_LAGSn x 32-bit words)
+ * Pipeline Metadata (2 x NUM_METAn x 32-bit words)
+ * Quantization Counters (2 x NUM_QCNTn x 32-bit words)
+ *
+ * The NUM_CORLn, NUM_LAGSn, NUM_METAn, and NUM_QCNTn values come from
+ * the FPGA configuration registers. They do not change once the FPGA's
+ * have been programmed, they only change on re-programming.
+ */
+
+/*
+ * Basic Description:
+ *
+ * This driver is used to capture correlation spectra off of the four data
+ * processing FPGAs. The FPGAs are often reprogrammed at runtime, therefore
+ * this driver supports dynamic enable/disable of capture while the device
+ * remains open.
+ *
+ * The nominal capture rate is 64Hz (every 15.625ms). To facilitate this fast
+ * capture rate, all buffers are pre-allocated to avoid any potentially long
+ * running memory allocations while capturing.
+ *
+ * There are two lists and one pointer which are used to keep track of the
+ * different states of data buffers.
+ *
+ * 1) free list
+ * This list holds all empty data buffers which are ready to receive data.
+ *
+ * 2) inflight pointer
+ * This pointer holds the currently inflight data buffer. This buffer is having
+ * data copied into it by the DMA engine.
+ *
+ * 3) used list
+ * This list holds data buffers which have been filled, and are waiting to be
+ * read by userspace.
+ *
+ * All buffers start life on the free list, then move successively to the
+ * inflight pointer, and then to the used list. After they have been read by
+ * userspace, they are moved back to the free list. The cycle repeats as long
+ * as necessary.
+ *
+ * It should be noted that all buffers are mapped and ready for DMA when they
+ * are on any of the three lists. They are only unmapped when they are in the
+ * process of being read by userspace.
+ */
+
+/*
+ * Notes on the IRQ masking scheme:
+ *
+ * The IRQ masking scheme here is different than most other hardware. The only
+ * way for the DATA-FPGAs to detect if the kernel has taken too long to copy
+ * the data is if the status registers are not cleared before the next
+ * correlation data dump is ready.
+ *
+ * The interrupt line is connected to the status registers, such that when they
+ * are cleared, the interrupt is de-asserted. Therein lies our problem. We need
+ * to schedule a long-running DMA operation and return from the interrupt
+ * handler quickly, but we cannot clear the status registers.
+ *
+ * To handle this, the system controller FPGA has the capability to connect the
+ * interrupt line to a user-controlled GPIO pin. This pin is driven high
+ * (unasserted) and left that way. To mask the interrupt, we change the
+ * interrupt source to the GPIO pin. Tada, we hid the interrupt. :)
+ */
+
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/seq_file.h>
+#include <linux/highmem.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/io.h>
+
+#include <media/videobuf-dma-sg.h>
+
+/* system controller registers */
+#define SYS_IRQ_SOURCE_CTL 0x24
+#define SYS_IRQ_OUTPUT_EN 0x28
+#define SYS_IRQ_OUTPUT_DATA 0x2C
+#define SYS_IRQ_INPUT_DATA 0x30
+#define SYS_FPGA_CONFIG_STATUS 0x44
+
+/* GPIO IRQ line assignment */
+#define IRQ_CORL_DONE 0x10
+
+/* FPGA registers */
+#define MMAP_REG_VERSION 0x00
+#define MMAP_REG_CORL_CONF1 0x08
+#define MMAP_REG_CORL_CONF2 0x0C
+#define MMAP_REG_STATUS 0x48
+
+#define SYS_FPGA_BLOCK 0xF0000000
+
+#define DATA_FPGA_START 0x400000
+#define DATA_FPGA_SIZE 0x80000
+
+static const char drv_name[] = "carma-fpga";
+
+#define NUM_FPGA 4
+
+#define MIN_DATA_BUFS 8
+#define MAX_DATA_BUFS 64
+
+struct fpga_info {
+ unsigned int num_lag_ram;
+ unsigned int blk_size;
+};
+
+struct data_buf {
+ struct list_head entry;
+ struct videobuf_dmabuf vb;
+ size_t size;
+};
+
+struct fpga_device {
+ /* character device */
+ struct miscdevice miscdev;
+ struct device *dev;
+ struct mutex mutex;
+
+ /* reference count */
+ struct kref ref;
+
+ /* FPGA registers and information */
+ struct fpga_info info[NUM_FPGA];
+ void __iomem *regs;
+ int irq;
+
+ /* FPGA Physical Address/Size Information */
+ resource_size_t phys_addr;
+ size_t phys_size;
+
+ /* DMA structures */
+ struct sg_table corl_table;
+ unsigned int corl_nents;
+ struct dma_chan *chan;
+
+ /* Protection for all members below */
+ spinlock_t lock;
+
+ /* Device enable/disable flag */
+ bool enabled;
+
+ /* Correlation data buffers */
+ wait_queue_head_t wait;
+ struct list_head free;
+ struct list_head used;
+ struct data_buf *inflight;
+
+ /* Information about data buffers */
+ unsigned int num_dropped;
+ unsigned int num_buffers;
+ size_t bufsize;
+ struct dentry *dbg_entry;
+};
+
+struct fpga_reader {
+ struct fpga_device *priv;
+ struct data_buf *buf;
+ off_t buf_start;
+};
+
+static void fpga_device_release(struct kref *ref)
+{
+ struct fpga_device *priv = container_of(ref, struct fpga_device, ref);
+
+ /* the last reader has exited, cleanup the last bits */
+ mutex_destroy(&priv->mutex);
+ kfree(priv);
+}
+
+/*
+ * Data Buffer Allocation Helpers
+ */
+
+/**
+ * data_free_buffer() - free a single data buffer and all allocated memory
+ * @buf: the buffer to free
+ *
+ * This will free all of the pages allocated to the given data buffer, and
+ * then free the structure itself
+ */
+static void data_free_buffer(struct data_buf *buf)
+{
+ /* It is ok to free a NULL buffer */
+ if (!buf)
+ return;
+
+ /* free all memory */
+ videobuf_dma_free(&buf->vb);
+ kfree(buf);
+}
+
+/**
+ * data_alloc_buffer() - allocate and fill a data buffer with pages
+ * @bytes: the number of bytes required
+ *
+ * This allocates all space needed for a data buffer. It must be mapped before
+ * use in a DMA transaction using videobuf_dma_map().
+ *
+ * Returns NULL on failure
+ */
+static struct data_buf *data_alloc_buffer(const size_t bytes)
+{
+ unsigned int nr_pages;
+ struct data_buf *buf;
+ int ret;
+
+ /* calculate the number of pages necessary */
+ nr_pages = DIV_ROUND_UP(bytes, PAGE_SIZE);
+
+ /* allocate the buffer structure */
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ goto out_return;
+
+ /* initialize internal fields */
+ INIT_LIST_HEAD(&buf->entry);
+ buf->size = bytes;
+
+ /* allocate the videobuf */
+ videobuf_dma_init(&buf->vb);
+ ret = videobuf_dma_init_kernel(&buf->vb, DMA_FROM_DEVICE, nr_pages);
+ if (ret)
+ goto out_free_buf;
+
+ return buf;
+
+out_free_buf:
+ kfree(buf);
+out_return:
+ return NULL;
+}
+
+/**
+ * data_free_buffers() - free all allocated buffers
+ * @priv: the driver's private data structure
+ *
+ * Free all buffers allocated by the driver (except those currently in the
+ * process of being read by userspace).
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user
+ */
+static void data_free_buffers(struct fpga_device *priv)
+{
+ struct data_buf *buf, *tmp;
+
+ /* the device should be stopped, no DMA in progress */
+ BUG_ON(priv->inflight != NULL);
+
+ list_for_each_entry_safe(buf, tmp, &priv->free, entry) {
+ list_del_init(&buf->entry);
+ videobuf_dma_unmap(priv->dev, &buf->vb);
+ data_free_buffer(buf);
+ }
+
+ list_for_each_entry_safe(buf, tmp, &priv->used, entry) {
+ list_del_init(&buf->entry);
+ videobuf_dma_unmap(priv->dev, &buf->vb);
+ data_free_buffer(buf);
+ }
+
+ priv->num_buffers = 0;
+ priv->bufsize = 0;
+}
+
+/**
+ * data_alloc_buffers() - allocate 1 seconds worth of data buffers
+ * @priv: the driver's private data structure
+ *
+ * Allocate enough buffers for a whole second worth of data
+ *
+ * This routine will attempt to degrade nicely by succeeding even if a full
+ * second worth of data buffers could not be allocated, as long as a minimum
+ * number were allocated. In this case, it will print a message to the kernel
+ * log.
+ *
+ * The device must not be modifying any lists when this is called.
+ *
+ * CONTEXT: user
+ * LOCKING: must hold dev->mutex
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_alloc_buffers(struct fpga_device *priv)
+{
+ struct data_buf *buf;
+ int i, ret;
+
+ for (i = 0; i < MAX_DATA_BUFS; i++) {
+
+ /* allocate a buffer */
+ buf = data_alloc_buffer(priv->bufsize);
+ if (!buf)
+ break;
+
+ /* map it for DMA */
+ ret = videobuf_dma_map(priv->dev, &buf->vb);
+ if (ret) {
+ data_free_buffer(buf);
+ break;
+ }
+
+ /* add it to the list of free buffers */
+ list_add_tail(&buf->entry, &priv->free);
+ priv->num_buffers++;
+ }
+
+ /* Make sure we allocated the minimum required number of buffers */
+ if (priv->num_buffers < MIN_DATA_BUFS) {
+ dev_err(priv->dev, "Unable to allocate enough data buffers\n");
+ data_free_buffers(priv);
+ return -ENOMEM;
+ }
+
+ /* Warn if we are running in a degraded state, but do not fail */
+ if (priv->num_buffers < MAX_DATA_BUFS) {
+ dev_warn(priv->dev,
+ "Unable to allocate %d buffers, using %d buffers instead\n",
+ MAX_DATA_BUFS, i);
+ }
+
+ return 0;
+}
+
+/*
+ * DMA Operations Helpers
+ */
+
+/**
+ * fpga_start_addr() - get the physical address a DATA-FPGA
+ * @priv: the driver's private data structure
+ * @fpga: the DATA-FPGA number (zero based)
+ */
+static dma_addr_t fpga_start_addr(struct fpga_device *priv, unsigned int fpga)
+{
+ return priv->phys_addr + 0x400000 + (0x80000 * fpga);
+}
+
+/**
+ * fpga_block_addr() - get the physical address of a correlation data block
+ * @priv: the driver's private data structure
+ * @fpga: the DATA-FPGA number (zero based)
+ * @blknum: the correlation block number (zero based)
+ */
+static dma_addr_t fpga_block_addr(struct fpga_device *priv, unsigned int fpga,
+ unsigned int blknum)
+{
+ return fpga_start_addr(priv, fpga) + (0x10000 * (1 + blknum));
+}
+
+#define REG_BLOCK_SIZE (32 * 4)
+
+/**
+ * data_setup_corl_table() - create the scatterlist for correlation dumps
+ * @priv: the driver's private data structure
+ *
+ * Create the scatterlist for transferring a correlation dump from the
+ * DATA FPGAs. This structure will be reused for each buffer than needs
+ * to be filled with correlation data.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_setup_corl_table(struct fpga_device *priv)
+{
+ struct sg_table *table = &priv->corl_table;
+ struct scatterlist *sg;
+ struct fpga_info *info;
+ int i, j, ret;
+
+ /* Calculate the number of entries needed */
+ priv->corl_nents = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
+ for (i = 0; i < NUM_FPGA; i++)
+ priv->corl_nents += priv->info[i].num_lag_ram;
+
+ /* Allocate the scatterlist table */
+ ret = sg_alloc_table(table, priv->corl_nents, GFP_KERNEL);
+ if (ret) {
+ dev_err(priv->dev, "unable to allocate DMA table\n");
+ return ret;
+ }
+
+ /* Add the DATA FPGA registers to the scatterlist */
+ sg = table->sgl;
+ for (i = 0; i < NUM_FPGA; i++) {
+ sg_dma_address(sg) = fpga_start_addr(priv, i);
+ sg_dma_len(sg) = REG_BLOCK_SIZE;
+ sg = sg_next(sg);
+ }
+
+ /* Add the SYS-FPGA registers to the scatterlist */
+ sg_dma_address(sg) = SYS_FPGA_BLOCK;
+ sg_dma_len(sg) = REG_BLOCK_SIZE;
+ sg = sg_next(sg);
+
+ /* Add the FPGA correlation data blocks to the scatterlist */
+ for (i = 0; i < NUM_FPGA; i++) {
+ info = &priv->info[i];
+ for (j = 0; j < info->num_lag_ram; j++) {
+ sg_dma_address(sg) = fpga_block_addr(priv, i, j);
+ sg_dma_len(sg) = info->blk_size;
+ sg = sg_next(sg);
+ }
+ }
+
+ /*
+ * All physical addresses and lengths are present in the structure
+ * now. It can be reused for every FPGA DATA interrupt
+ */
+ return 0;
+}
+
+/*
+ * FPGA Register Access Helpers
+ */
+
+static void fpga_write_reg(struct fpga_device *priv, unsigned int fpga,
+ unsigned int reg, u32 val)
+{
+ const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
+ iowrite32be(val, priv->regs + fpga_start + reg);
+}
+
+static u32 fpga_read_reg(struct fpga_device *priv, unsigned int fpga,
+ unsigned int reg)
+{
+ const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
+ return ioread32be(priv->regs + fpga_start + reg);
+}
+
+/**
+ * data_calculate_bufsize() - calculate the data buffer size required
+ * @priv: the driver's private data structure
+ *
+ * Calculate the total buffer size needed to hold a single block
+ * of correlation data
+ *
+ * CONTEXT: user
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_calculate_bufsize(struct fpga_device *priv)
+{
+ u32 num_corl, num_lags, num_meta, num_qcnt, num_pack;
+ u32 conf1, conf2, version;
+ u32 num_lag_ram, blk_size;
+ int i;
+
+ /* Each buffer starts with the 5 FPGA register areas */
+ priv->bufsize = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
+
+ /* Read and store the configuration data for each FPGA */
+ for (i = 0; i < NUM_FPGA; i++) {
+ version = fpga_read_reg(priv, i, MMAP_REG_VERSION);
+ conf1 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF1);
+ conf2 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF2);
+
+ /* minor version 2 and later */
+ if ((version & 0x000000FF) >= 2) {
+ num_corl = (conf1 & 0x000000F0) >> 4;
+ num_pack = (conf1 & 0x00000F00) >> 8;
+ num_lags = (conf1 & 0x00FFF000) >> 12;
+ num_meta = (conf1 & 0x7F000000) >> 24;
+ num_qcnt = (conf2 & 0x00000FFF) >> 0;
+ } else {
+ num_corl = (conf1 & 0x000000F0) >> 4;
+ num_pack = 1; /* implied */
+ num_lags = (conf1 & 0x000FFF00) >> 8;
+ num_meta = (conf1 & 0x7FF00000) >> 20;
+ num_qcnt = (conf2 & 0x00000FFF) >> 0;
+ }
+
+ num_lag_ram = (num_corl + num_pack - 1) / num_pack;
+ blk_size = ((num_pack * num_lags) + num_meta + num_qcnt) * 8;
+
+ priv->info[i].num_lag_ram = num_lag_ram;
+ priv->info[i].blk_size = blk_size;
+ priv->bufsize += num_lag_ram * blk_size;
+
+ dev_dbg(priv->dev, "FPGA %d NUM_CORL: %d\n", i, num_corl);
+ dev_dbg(priv->dev, "FPGA %d NUM_PACK: %d\n", i, num_pack);
+ dev_dbg(priv->dev, "FPGA %d NUM_LAGS: %d\n", i, num_lags);
+ dev_dbg(priv->dev, "FPGA %d NUM_META: %d\n", i, num_meta);
+ dev_dbg(priv->dev, "FPGA %d NUM_QCNT: %d\n", i, num_qcnt);
+ dev_dbg(priv->dev, "FPGA %d BLK_SIZE: %d\n", i, blk_size);
+ }
+
+ dev_dbg(priv->dev, "TOTAL BUFFER SIZE: %zu bytes\n", priv->bufsize);
+ return 0;
+}
+
+/*
+ * Interrupt Handling
+ */
+
+/**
+ * data_disable_interrupts() - stop the device from generating interrupts
+ * @priv: the driver's private data structure
+ *
+ * Hide interrupts by switching to GPIO interrupt source
+ *
+ * LOCKING: must hold dev->lock
+ */
+static void data_disable_interrupts(struct fpga_device *priv)
+{
+ /* hide the interrupt by switching the IRQ driver to GPIO */
+ iowrite32be(0x2F, priv->regs + SYS_IRQ_SOURCE_CTL);
+}
+
+/**
+ * data_enable_interrupts() - allow the device to generate interrupts
+ * @priv: the driver's private data structure
+ *
+ * Unhide interrupts by switching to the FPGA interrupt source. At the
+ * same time, clear the DATA-FPGA status registers.
+ *
+ * LOCKING: must hold dev->lock
+ */
+static void data_enable_interrupts(struct fpga_device *priv)
+{
+ /* clear the actual FPGA corl_done interrupt */
+ fpga_write_reg(priv, 0, MMAP_REG_STATUS, 0x0);
+ fpga_write_reg(priv, 1, MMAP_REG_STATUS, 0x0);
+ fpga_write_reg(priv, 2, MMAP_REG_STATUS, 0x0);
+ fpga_write_reg(priv, 3, MMAP_REG_STATUS, 0x0);
+
+ /* flush the writes */
+ fpga_read_reg(priv, 0, MMAP_REG_STATUS);
+
+ /* switch back to the external interrupt source */
+ iowrite32be(0x3F, priv->regs + SYS_IRQ_SOURCE_CTL);
+}
+
+/**
+ * data_dma_cb() - DMAEngine callback for DMA completion
+ * @data: the driver's private data structure
+ *
+ * Complete a DMA transfer from the DATA-FPGA's
+ *
+ * This is called via the DMA callback mechanism, and will handle moving the
+ * completed DMA transaction to the used list, and then wake any processes
+ * waiting for new data
+ *
+ * CONTEXT: any, softirq expected
+ */
+static void data_dma_cb(void *data)
+{
+ struct fpga_device *priv = data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* If there is no inflight buffer, we've got a bug */
+ BUG_ON(priv->inflight == NULL);
+
+ /* Move the inflight buffer onto the used list */
+ list_move_tail(&priv->inflight->entry, &priv->used);
+ priv->inflight = NULL;
+
+ /* clear the FPGA status and re-enable interrupts */
+ data_enable_interrupts(priv);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /*
+ * We've changed both the inflight and used lists, so we need
+ * to wake up any processes that are blocking for those events
+ */
+ wake_up(&priv->wait);
+}
+
+/**
+ * data_submit_dma() - prepare and submit the required DMA to fill a buffer
+ * @priv: the driver's private data structure
+ * @buf: the data buffer
+ *
+ * Prepare and submit the necessary DMA transactions to fill a correlation
+ * data buffer.
+ *
+ * LOCKING: must hold dev->lock
+ * CONTEXT: hardirq only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_submit_dma(struct fpga_device *priv, struct data_buf *buf)
+{
+ struct scatterlist *dst_sg, *src_sg;
+ unsigned int dst_nents, src_nents;
+ struct dma_chan *chan = priv->chan;
+ struct dma_async_tx_descriptor *tx;
+ dma_cookie_t cookie;
+ dma_addr_t dst, src;
+
+ dst_sg = buf->vb.sglist;
+ dst_nents = buf->vb.sglen;
+
+ src_sg = priv->corl_table.sgl;
+ src_nents = priv->corl_nents;
+
+ /*
+ * All buffers passed to this function should be ready and mapped
+ * for DMA already. Therefore, we don't need to do anything except
+ * submit it to the Freescale DMA Engine for processing
+ */
+
+ /* setup the scatterlist to scatterlist transfer */
+ tx = chan->device->device_prep_dma_sg(chan,
+ dst_sg, dst_nents,
+ src_sg, src_nents,
+ 0);
+ if (!tx) {
+ dev_err(priv->dev, "unable to prep scatterlist DMA\n");
+ return -ENOMEM;
+ }
+
+ /* submit the transaction to the DMA controller */
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(priv->dev, "unable to submit scatterlist DMA\n");
+ return -ENOMEM;
+ }
+
+ /* Prepare the re-read of the SYS-FPGA block */
+ dst = sg_dma_address(dst_sg) + (NUM_FPGA * REG_BLOCK_SIZE);
+ src = SYS_FPGA_BLOCK;
+ tx = chan->device->device_prep_dma_memcpy(chan, dst, src,
+ REG_BLOCK_SIZE,
+ DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(priv->dev, "unable to prep SYS-FPGA DMA\n");
+ return -ENOMEM;
+ }
+
+ /* Setup the callback */
+ tx->callback = data_dma_cb;
+ tx->callback_param = priv;
+
+ /* submit the transaction to the DMA controller */
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(priv->dev, "unable to submit SYS-FPGA DMA\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+#define CORL_DONE 0x1
+#define CORL_ERR 0x2
+
+static irqreturn_t data_irq(int irq, void *dev_id)
+{
+ struct fpga_device *priv = dev_id;
+ bool submitted = false;
+ struct data_buf *buf;
+ u32 status;
+ int i;
+
+ /* detect spurious interrupts via FPGA status */
+ for (i = 0; i < 4; i++) {
+ status = fpga_read_reg(priv, i, MMAP_REG_STATUS);
+ if (!(status & (CORL_DONE | CORL_ERR))) {
+ dev_err(priv->dev, "spurious irq detected (FPGA)\n");
+ return IRQ_NONE;
+ }
+ }
+
+ /* detect spurious interrupts via raw IRQ pin readback */
+ status = ioread32be(priv->regs + SYS_IRQ_INPUT_DATA);
+ if (status & IRQ_CORL_DONE) {
+ dev_err(priv->dev, "spurious irq detected (IRQ)\n");
+ return IRQ_NONE;
+ }
+
+ spin_lock(&priv->lock);
+
+ /* hide the interrupt by switching the IRQ driver to GPIO */
+ data_disable_interrupts(priv);
+
+ /* If there are no free buffers, drop this data */
+ if (list_empty(&priv->free)) {
+ priv->num_dropped++;
+ goto out;
+ }
+
+ buf = list_first_entry(&priv->free, struct data_buf, entry);
+ list_del_init(&buf->entry);
+ BUG_ON(buf->size != priv->bufsize);
+
+ /* Submit a DMA transfer to get the correlation data */
+ if (data_submit_dma(priv, buf)) {
+ dev_err(priv->dev, "Unable to setup DMA transfer\n");
+ list_move_tail(&buf->entry, &priv->free);
+ goto out;
+ }
+
+ /* Save the buffer for the DMA callback */
+ priv->inflight = buf;
+ submitted = true;
+
+ /* Start the DMA Engine */
+ dma_async_memcpy_issue_pending(priv->chan);
+
+out:
+ /* If no DMA was submitted, re-enable interrupts */
+ if (!submitted)
+ data_enable_interrupts(priv);
+
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Realtime Device Enable Helpers
+ */
+
+/**
+ * data_device_enable() - enable the device for buffered dumping
+ * @priv: the driver's private data structure
+ *
+ * Enable the device for buffered dumping. Allocates buffers and hooks up
+ * the interrupt handler. When this finishes, data will come pouring in.
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user context only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_device_enable(struct fpga_device *priv)
+{
+ u32 val;
+ int ret;
+
+ /* multiple enables are safe: they do nothing */
+ if (priv->enabled)
+ return 0;
+
+ /* check that the FPGAs are programmed */
+ val = ioread32be(priv->regs + SYS_FPGA_CONFIG_STATUS);
+ if (!(val & (1 << 18))) {
+ dev_err(priv->dev, "DATA-FPGAs are not enabled\n");
+ return -ENODATA;
+ }
+
+ /* read the FPGAs to calculate the buffer size */
+ ret = data_calculate_bufsize(priv);
+ if (ret) {
+ dev_err(priv->dev, "unable to calculate buffer size\n");
+ goto out_error;
+ }
+
+ /* allocate the correlation data buffers */
+ ret = data_alloc_buffers(priv);
+ if (ret) {
+ dev_err(priv->dev, "unable to allocate buffers\n");
+ goto out_error;
+ }
+
+ /* setup the source scatterlist for dumping correlation data */
+ ret = data_setup_corl_table(priv);
+ if (ret) {
+ dev_err(priv->dev, "unable to setup correlation DMA table\n");
+ goto out_error;
+ }
+
+ /* hookup the irq handler */
+ ret = request_irq(priv->irq, data_irq, IRQF_SHARED, drv_name, priv);
+ if (ret) {
+ dev_err(priv->dev, "unable to request IRQ handler\n");
+ goto out_error;
+ }
+
+ /* switch to the external FPGA IRQ line */
+ data_enable_interrupts(priv);
+
+ /* success, we're enabled */
+ priv->enabled = true;
+ return 0;
+
+out_error:
+ sg_free_table(&priv->corl_table);
+ priv->corl_nents = 0;
+
+ data_free_buffers(priv);
+ return ret;
+}
+
+/**
+ * data_device_disable() - disable the device for buffered dumping
+ * @priv: the driver's private data structure
+ *
+ * Disable the device for buffered dumping. Stops new DMA transactions from
+ * being generated, waits for all outstanding DMA to complete, and then frees
+ * all buffers.
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_device_disable(struct fpga_device *priv)
+{
+ int ret;
+
+ /* allow multiple disable */
+ if (!priv->enabled)
+ return 0;
+
+ /* switch to the internal GPIO IRQ line */
+ data_disable_interrupts(priv);
+
+ /* unhook the irq handler */
+ free_irq(priv->irq, priv);
+
+ /*
+ * wait for all outstanding DMA to complete
+ *
+ * Device interrupts are disabled, therefore another buffer cannot
+ * be marked inflight.
+ */
+ ret = wait_event_interruptible(priv->wait, priv->inflight == NULL);
+ if (ret)
+ return ret;
+
+ /* free the correlation table */
+ sg_free_table(&priv->corl_table);
+ priv->corl_nents = 0;
+
+ /*
+ * We are taking the spinlock not to protect priv->enabled, but instead
+ * to make sure that there are no readers in the process of altering
+ * the free or used lists while we are setting this flag.
+ */
+ spin_lock_irq(&priv->lock);
+ priv->enabled = false;
+ spin_unlock_irq(&priv->lock);
+
+ /* free all buffers: the free and used lists are not being changed */
+ data_free_buffers(priv);
+ return 0;
+}
+
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+/*
+ * Count the number of entries in the given list
+ */
+static unsigned int list_num_entries(struct list_head *list)
+{
+ struct list_head *entry;
+ unsigned int ret = 0;
+
+ list_for_each(entry, list)
+ ret++;
+
+ return ret;
+}
+
+static int data_debug_show(struct seq_file *f, void *offset)
+{
+ struct fpga_device *priv = f->private;
+ int ret;
+
+ /*
+ * Lock the mutex first, so that we get an accurate value for enable
+ * Lock the spinlock next, to get accurate list counts
+ */
+ ret = mutex_lock_interruptible(&priv->mutex);
+ if (ret)
+ return ret;
+
+ spin_lock_irq(&priv->lock);
+
+ seq_printf(f, "enabled: %d\n", priv->enabled);
+ seq_printf(f, "bufsize: %d\n", priv->bufsize);
+ seq_printf(f, "num_buffers: %d\n", priv->num_buffers);
+ seq_printf(f, "num_free: %d\n", list_num_entries(&priv->free));
+ seq_printf(f, "inflight: %d\n", priv->inflight != NULL);
+ seq_printf(f, "num_used: %d\n", list_num_entries(&priv->used));
+ seq_printf(f, "num_dropped: %d\n", priv->num_dropped);
+
+ spin_unlock_irq(&priv->lock);
+ mutex_unlock(&priv->mutex);
+ return 0;
+}
+
+static int data_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, data_debug_show, inode->i_private);
+}
+
+static const struct file_operations data_debug_fops = {
+ .owner = THIS_MODULE,
+ .open = data_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int data_debugfs_init(struct fpga_device *priv)
+{
+ priv->dbg_entry = debugfs_create_file(drv_name, S_IRUGO, NULL, priv,
+ &data_debug_fops);
+ if (IS_ERR(priv->dbg_entry))
+ return PTR_ERR(priv->dbg_entry);
+
+ return 0;
+}
+
+static void data_debugfs_exit(struct fpga_device *priv)
+{
+ debugfs_remove(priv->dbg_entry);
+}
+
+#else
+
+static inline int data_debugfs_init(struct fpga_device *priv)
+{
+ return 0;
+}
+
+static inline void data_debugfs_exit(struct fpga_device *priv)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ * SYSFS Attributes
+ */
+
+static ssize_t data_en_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fpga_device *priv = dev_get_drvdata(dev);
+ return snprintf(buf, PAGE_SIZE, "%u\n", priv->enabled);
+}
+
+static ssize_t data_en_set(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fpga_device *priv = dev_get_drvdata(dev);
+ unsigned long enable;
+ int ret;
+
+ ret = strict_strtoul(buf, 0, &enable);
+ if (ret) {
+ dev_err(priv->dev, "unable to parse enable input\n");
+ return -EINVAL;
+ }
+
+ ret = mutex_lock_interruptible(&priv->mutex);
+ if (ret)
+ return ret;
+
+ if (enable)
+ ret = data_device_enable(priv);
+ else
+ ret = data_device_disable(priv);
+
+ if (ret) {
+ dev_err(priv->dev, "device %s failed\n",
+ enable ? "enable" : "disable");
+ count = ret;
+ goto out_unlock;
+ }
+
+out_unlock:
+ mutex_unlock(&priv->mutex);
+ return count;
+}
+
+static DEVICE_ATTR(enable, S_IWUSR | S_IRUGO, data_en_show, data_en_set);
+
+static struct attribute *data_sysfs_attrs[] = {
+ &dev_attr_enable.attr,
+ NULL,
+};
+
+static const struct attribute_group rt_sysfs_attr_group = {
+ .attrs = data_sysfs_attrs,
+};
+
+/*
+ * FPGA Realtime Data Character Device
+ */
+
+static int data_open(struct inode *inode, struct file *filp)
+{
+ /*
+ * The miscdevice layer puts our struct miscdevice into the
+ * filp->private_data field. We use this to find our private
+ * data and then overwrite it with our own private structure.
+ */
+ struct fpga_device *priv = container_of(filp->private_data,
+ struct fpga_device, miscdev);
+ struct fpga_reader *reader;
+ int ret;
+
+ /* allocate private data */
+ reader = kzalloc(sizeof(*reader), GFP_KERNEL);
+ if (!reader)
+ return -ENOMEM;
+
+ reader->priv = priv;
+ reader->buf = NULL;
+
+ filp->private_data = reader;
+ ret = nonseekable_open(inode, filp);
+ if (ret) {
+ dev_err(priv->dev, "nonseekable-open failed\n");
+ kfree(reader);
+ return ret;
+ }
+
+ /*
+ * success, increase the reference count of the private data structure
+ * so that it doesn't disappear if the device is unbound
+ */
+ kref_get(&priv->ref);
+ return 0;
+}
+
+static int data_release(struct inode *inode, struct file *filp)
+{
+ struct fpga_reader *reader = filp->private_data;
+ struct fpga_device *priv = reader->priv;
+
+ /* free the per-reader structure */
+ data_free_buffer(reader->buf);
+ kfree(reader);
+ filp->private_data = NULL;
+
+ /* decrement our reference count to the private data */
+ kref_put(&priv->ref, fpga_device_release);
+ return 0;
+}
+
+static ssize_t data_read(struct file *filp, char __user *ubuf, size_t count,
+ loff_t *f_pos)
+{
+ struct fpga_reader *reader = filp->private_data;
+ struct fpga_device *priv = reader->priv;
+ struct list_head *used = &priv->used;
+ struct data_buf *dbuf;
+ size_t avail;
+ void *data;
+ int ret;
+
+ /* check if we already have a partial buffer */
+ if (reader->buf) {
+ dbuf = reader->buf;
+ goto have_buffer;
+ }
+
+ spin_lock_irq(&priv->lock);
+
+ /* Block until there is at least one buffer on the used list */
+ while (list_empty(used)) {
+ spin_unlock_irq(&priv->lock);
+
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ ret = wait_event_interruptible(priv->wait, !list_empty(used));
+ if (ret)
+ return ret;
+
+ spin_lock_irq(&priv->lock);
+ }
+
+ /* Grab the first buffer off of the used list */
+ dbuf = list_first_entry(used, struct data_buf, entry);
+ list_del_init(&dbuf->entry);
+
+ spin_unlock_irq(&priv->lock);
+
+ /* Buffers are always mapped: unmap it */
+ videobuf_dma_unmap(priv->dev, &dbuf->vb);
+
+ /* save the buffer for later */
+ reader->buf = dbuf;
+ reader->buf_start = 0;
+
+have_buffer:
+ /* Get the number of bytes available */
+ avail = dbuf->size - reader->buf_start;
+ data = dbuf->vb.vaddr + reader->buf_start;
+
+ /* Get the number of bytes we can transfer */
+ count = min(count, avail);
+
+ /* Copy the data to the userspace buffer */
+ if (copy_to_user(ubuf, data, count))
+ return -EFAULT;
+
+ /* Update the amount of available space */
+ avail -= count;
+
+ /*
+ * If there is still some data available, save the buffer for the
+ * next userspace call to read() and return
+ */
+ if (avail > 0) {
+ reader->buf_start += count;
+ reader->buf = dbuf;
+ return count;
+ }
+
+ /*
+ * Get the buffer ready to be reused for DMA
+ *
+ * If it fails, we pretend that the read never happed and return
+ * -EFAULT to userspace. The read will be retried.
+ */
+ ret = videobuf_dma_map(priv->dev, &dbuf->vb);
+ if (ret) {
+ dev_err(priv->dev, "unable to remap buffer for DMA\n");
+ return -EFAULT;
+ }
+
+ /* Lock against concurrent enable/disable */
+ spin_lock_irq(&priv->lock);
+
+ /* the reader is finished with this buffer */
+ reader->buf = NULL;
+
+ /*
+ * One of two things has happened, the device is disabled, or the
+ * device has been reconfigured underneath us. In either case, we
+ * should just throw away the buffer.
+ */
+ if (!priv->enabled || dbuf->size != priv->bufsize) {
+ videobuf_dma_unmap(priv->dev, &dbuf->vb);
+ data_free_buffer(dbuf);
+ goto out_unlock;
+ }
+
+ /* The buffer is safe to reuse, so add it back to the free list */
+ list_add_tail(&dbuf->entry, &priv->free);
+
+out_unlock:
+ spin_unlock_irq(&priv->lock);
+ return count;
+}
+
+static unsigned int data_poll(struct file *filp, struct poll_table_struct *tbl)
+{
+ struct fpga_reader *reader = filp->private_data;
+ struct fpga_device *priv = reader->priv;
+ unsigned int mask = 0;
+
+ poll_wait(filp, &priv->wait, tbl);
+
+ if (!list_empty(&priv->used))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static int data_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ struct fpga_reader *reader = filp->private_data;
+ struct fpga_device *priv = reader->priv;
+ unsigned long offset, vsize, psize, addr;
+
+ /* VMA properties */
+ offset = vma->vm_pgoff << PAGE_SHIFT;
+ vsize = vma->vm_end - vma->vm_start;
+ psize = priv->phys_size - offset;
+ addr = (priv->phys_addr + offset) >> PAGE_SHIFT;
+
+ /* Check against the FPGA region's physical memory size */
+ if (vsize > psize) {
+ dev_err(priv->dev, "requested mmap mapping too large\n");
+ return -EINVAL;
+ }
+
+ /* IO memory (stop cacheing) */
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ return io_remap_pfn_range(vma, vma->vm_start, addr, vsize,
+ vma->vm_page_prot);
+}
+
+static const struct file_operations data_fops = {
+ .owner = THIS_MODULE,
+ .open = data_open,
+ .release = data_release,
+ .read = data_read,
+ .poll = data_poll,
+ .mmap = data_mmap,
+ .llseek = no_llseek,
+};
+
+/*
+ * OpenFirmware Device Subsystem
+ */
+
+static bool dma_filter(struct dma_chan *chan, void *data)
+{
+ /*
+ * DMA Channel #0 is used for the FPGA Programmer, so ignore it
+ *
+ * This probably won't survive an unload/load cycle of the Freescale
+ * DMAEngine driver, but that won't be a problem
+ */
+ if (chan->chan_id == 0 && chan->device->dev_id == 0)
+ return false;
+
+ return true;
+}
+
+static int data_of_probe(struct platform_device *op,
+ const struct of_device_id *match)
+{
+ struct device_node *of_node = op->dev.of_node;
+ struct device *this_device;
+ struct fpga_device *priv;
+ struct resource res;
+ dma_cap_mask_t mask;
+ int ret;
+
+ /* Allocate private data */
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&op->dev, "Unable to allocate device private data\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ dev_set_drvdata(&op->dev, priv);
+ priv->dev = &op->dev;
+ kref_init(&priv->ref);
+ mutex_init(&priv->mutex);
+
+ dev_set_drvdata(priv->dev, priv);
+ spin_lock_init(&priv->lock);
+ INIT_LIST_HEAD(&priv->free);
+ INIT_LIST_HEAD(&priv->used);
+ init_waitqueue_head(&priv->wait);
+
+ /* Setup the misc device */
+ priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+ priv->miscdev.name = drv_name;
+ priv->miscdev.fops = &data_fops;
+
+ /* Get the physical address of the FPGA registers */
+ ret = of_address_to_resource(of_node, 0, &res);
+ if (ret) {
+ dev_err(&op->dev, "Unable to find FPGA physical address\n");
+ ret = -ENODEV;
+ goto out_free_priv;
+ }
+
+ priv->phys_addr = res.start;
+ priv->phys_size = resource_size(&res);
+
+ /* ioremap the registers for use */
+ priv->regs = of_iomap(of_node, 0);
+ if (!priv->regs) {
+ dev_err(&op->dev, "Unable to ioremap registers\n");
+ ret = -ENOMEM;
+ goto out_free_priv;
+ }
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ dma_cap_set(DMA_INTERRUPT, mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_SG, mask);
+
+ /* Request a DMA channel */
+ priv->chan = dma_request_channel(mask, dma_filter, NULL);
+ if (!priv->chan) {
+ dev_err(&op->dev, "Unable to request DMA channel\n");
+ ret = -ENODEV;
+ goto out_unmap_regs;
+ }
+
+ /* Find the correct IRQ number */
+ priv->irq = irq_of_parse_and_map(of_node, 0);
+ if (priv->irq == NO_IRQ) {
+ dev_err(&op->dev, "Unable to find IRQ line\n");
+ ret = -ENODEV;
+ goto out_release_dma;
+ }
+
+ /* Drive the GPIO for FPGA IRQ high (no interrupt) */
+ iowrite32be(IRQ_CORL_DONE, priv->regs + SYS_IRQ_OUTPUT_DATA);
+
+ /* Register the miscdevice */
+ ret = misc_register(&priv->miscdev);
+ if (ret) {
+ dev_err(&op->dev, "Unable to register miscdevice\n");
+ goto out_irq_dispose_mapping;
+ }
+
+ /* Create the debugfs files */
+ ret = data_debugfs_init(priv);
+ if (ret) {
+ dev_err(&op->dev, "Unable to create debugfs files\n");
+ goto out_misc_deregister;
+ }
+
+ /* Create the sysfs files */
+ this_device = priv->miscdev.this_device;
+ dev_set_drvdata(this_device, priv);
+ ret = sysfs_create_group(&this_device->kobj, &rt_sysfs_attr_group);
+ if (ret) {
+ dev_err(&op->dev, "Unable to create sysfs files\n");
+ goto out_data_debugfs_exit;
+ }
+
+ dev_info(&op->dev, "CARMA FPGA Realtime Data Driver Loaded\n");
+ return 0;
+
+out_data_debugfs_exit:
+ data_debugfs_exit(priv);
+out_misc_deregister:
+ misc_deregister(&priv->miscdev);
+out_irq_dispose_mapping:
+ irq_dispose_mapping(priv->irq);
+out_release_dma:
+ dma_release_channel(priv->chan);
+out_unmap_regs:
+ iounmap(priv->regs);
+out_free_priv:
+ kref_put(&priv->ref, fpga_device_release);
+out_return:
+ return ret;
+}
+
+static int data_of_remove(struct platform_device *op)
+{
+ struct fpga_device *priv = dev_get_drvdata(&op->dev);
+ struct device *this_device = priv->miscdev.this_device;
+
+ /* remove all sysfs files, now the device cannot be re-enabled */
+ sysfs_remove_group(&this_device->kobj, &rt_sysfs_attr_group);
+
+ /* remove all debugfs files */
+ data_debugfs_exit(priv);
+
+ /* disable the device from generating data */
+ data_device_disable(priv);
+
+ /* remove the character device to stop new readers from appearing */
+ misc_deregister(&priv->miscdev);
+
+ /* cleanup everything not needed by readers */
+ irq_dispose_mapping(priv->irq);
+ dma_release_channel(priv->chan);
+ iounmap(priv->regs);
+
+ /* release our reference */
+ kref_put(&priv->ref, fpga_device_release);
+ return 0;
+}
+
+static struct of_device_id data_of_match[] = {
+ { .compatible = "carma,carma-fpga", },
+ {},
+};
+
+static struct of_platform_driver data_of_driver = {
+ .probe = data_of_probe,
+ .remove = data_of_remove,
+ .driver = {
+ .name = drv_name,
+ .of_match_table = data_of_match,
+ .owner = THIS_MODULE,
+ },
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init data_init(void)
+{
+ return of_register_platform_driver(&data_of_driver);
+}
+
+static void __exit data_exit(void)
+{
+ of_unregister_platform_driver(&data_of_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("CARMA DATA-FPGA Access Driver");
+MODULE_LICENSE("GPL");
+
+module_init(data_init);
+module_exit(data_exit);
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
index 38657cd..c4acac7 100644
--- a/drivers/misc/sgi-gru/grufault.c
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -33,6 +33,7 @@
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/security.h>
+#include <linux/prefetch.h>
#include <asm/pgtable.h>
#include "gru.h"
#include "grutables.h"
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
index f8538bb..ae16c8c 100644
--- a/drivers/misc/sgi-gru/grumain.c
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -28,6 +28,7 @@
#include <linux/device.h>
#include <linux/list.h>
#include <linux/err.h>
+#include <linux/prefetch.h>
#include <asm/uv/uv_hub.h>
#include "gru.h"
#include "grutables.h"
diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
index 2c8c3f39..abb5de1 100644
--- a/drivers/misc/ti-st/Kconfig
+++ b/drivers/misc/ti-st/Kconfig
@@ -5,7 +5,7 @@
menu "Texas Instruments shared transport line discipline"
config TI_ST
tristate "Shared transport core driver"
- depends on RFKILL
+ depends on NET && GPIOLIB
select FW_LOADER
help
This enables the shared transport core driver for TI
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 486117f..f91f82e 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -43,13 +43,15 @@
pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
/* list now has the channel id as index itself */
st_gdata->list[new_proto->chnl_id] = new_proto;
+ st_gdata->is_registered[new_proto->chnl_id] = true;
}
static void remove_channel_from_table(struct st_data_s *st_gdata,
struct st_proto_s *proto)
{
pr_info("%s: id %d\n", __func__, proto->chnl_id);
- st_gdata->list[proto->chnl_id] = NULL;
+/* st_gdata->list[proto->chnl_id] = NULL; */
+ st_gdata->is_registered[proto->chnl_id] = false;
}
/*
@@ -104,7 +106,7 @@
if (unlikely
(st_gdata == NULL || st_gdata->rx_skb == NULL
- || st_gdata->list[chnl_id] == NULL)) {
+ || st_gdata->is_registered[chnl_id] == false)) {
pr_err("chnl_id %d not registered, no data to send?",
chnl_id);
kfree_skb(st_gdata->rx_skb);
@@ -141,14 +143,15 @@
unsigned char i = 0;
pr_info(" %s ", __func__);
for (i = 0; i < ST_MAX_CHANNELS; i++) {
- if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
- st_gdata->list[i]->reg_complete_cb != NULL)) {
+ if (likely(st_gdata != NULL &&
+ st_gdata->is_registered[i] == true &&
+ st_gdata->list[i]->reg_complete_cb != NULL)) {
st_gdata->list[i]->reg_complete_cb
(st_gdata->list[i]->priv_data, err);
pr_info("protocol %d's cb sent %d\n", i, err);
if (err) { /* cleanup registered protocol */
st_gdata->protos_registered--;
- st_gdata->list[i] = NULL;
+ st_gdata->is_registered[i] = false;
}
}
}
@@ -475,9 +478,9 @@
{
seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
st_gdata->protos_registered,
- st_gdata->list[0x04] != NULL ? 'R' : 'U',
- st_gdata->list[0x08] != NULL ? 'R' : 'U',
- st_gdata->list[0x09] != NULL ? 'R' : 'U');
+ st_gdata->is_registered[0x04] == true ? 'R' : 'U',
+ st_gdata->is_registered[0x08] == true ? 'R' : 'U',
+ st_gdata->is_registered[0x09] == true ? 'R' : 'U');
}
/********************************************************************/
@@ -504,7 +507,7 @@
return -EPROTONOSUPPORT;
}
- if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ if (st_gdata->is_registered[new_proto->chnl_id] == true) {
pr_err("chnl_id %d already registered", new_proto->chnl_id);
return -EALREADY;
}
@@ -563,7 +566,7 @@
/* check for already registered once more,
* since the above check is old
*/
- if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ if (st_gdata->is_registered[new_proto->chnl_id] == true) {
pr_err(" proto %d already registered ",
new_proto->chnl_id);
return -EALREADY;
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index b4488c8..5da93ee 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,6 +30,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
+#include <linux/sysfs.h>
#include <linux/tty.h>
#include <linux/skbuff.h>
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 63667a8..d6d62fd 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -284,6 +284,7 @@
type = "SD-combo";
if (mmc_card_blockaddr(card))
type = "SDHC-combo";
+ break;
default:
type = "?";
break;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 2e032f0..a6c3290 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -832,7 +832,7 @@
return IRQ_HANDLED;
}
- if (end_command)
+ if (end_command && host->cmd)
mmc_omap_cmd_done(host, host->cmd);
if (host->data != NULL) {
if (transfer_error)
diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c
index f9b611f..60e4186 100644
--- a/drivers/mmc/host/sdhci-of-core.c
+++ b/drivers/mmc/host/sdhci-of-core.c
@@ -124,8 +124,10 @@
#endif
}
+static const struct of_device_id sdhci_of_match[];
static int __devinit sdhci_of_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct device_node *np = ofdev->dev.of_node;
struct sdhci_of_data *sdhci_of_data;
struct sdhci_host *host;
@@ -134,9 +136,10 @@
int size;
int ret;
- if (!ofdev->dev.of_match)
+ match = of_match_device(sdhci_of_match, &ofdev->dev);
+ if (!match)
return -EINVAL;
- sdhci_of_data = ofdev->dev.of_match->data;
+ sdhci_of_data = match->data;
if (!of_device_is_available(np))
return -ENODEV;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index a136be7..f8b5f37 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -957,6 +957,7 @@
host->ioaddr = pci_ioremap_bar(pdev, bar);
if (!host->ioaddr) {
dev_err(&pdev->dev, "failed to remap registers\n");
+ ret = -ENOMEM;
goto release;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9e15f41..5d20661 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1334,6 +1334,13 @@
host = (struct sdhci_host*)param;
+ /*
+ * If this tasklet gets rescheduled while running, it will
+ * be run again afterwards but without any active request.
+ */
+ if (!host->mrq)
+ return;
+
spin_lock_irqsave(&host->lock, flags);
del_timer(&host->timer);
@@ -1345,7 +1352,7 @@
* upon error conditions.
*/
if (!(host->flags & SDHCI_DEVICE_DEAD) &&
- (mrq->cmd->error ||
+ ((mrq->cmd && mrq->cmd->error) ||
(mrq->data && (mrq->data->error ||
(mrq->data->stop && mrq->data->stop->error))) ||
(host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 62d37de..710339a 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -728,15 +728,15 @@
tmio_mmc_set_clock(host, ios->clock);
/* Power sequence - OFF -> UP -> ON */
- if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
+ if (ios->power_mode == MMC_POWER_UP) {
+ /* power up SD bus */
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 1);
+ } else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
/* power down SD bus */
if (ios->power_mode == MMC_POWER_OFF && host->set_pwr)
host->set_pwr(host->pdev, 0);
tmio_mmc_clk_stop(host);
- } else if (ios->power_mode == MMC_POWER_UP) {
- /* power up SD bus */
- if (host->set_pwr)
- host->set_pwr(host->pdev, 1);
} else {
/* start bus clock */
tmio_mmc_clk_start(host);
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index b4567c35..bc50d5e 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -148,8 +148,7 @@
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically. The
- 'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
- example.
+ 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
config MTD_OF_PARTS
def_bool y
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 44b1f46..5069111 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -260,6 +260,13 @@
Support for parsing CFE image tag and creating MTD partitions on
Broadcom BCM63xx boards.
+config MTD_LANTIQ
+ tristate "Lantiq SoC NOR support"
+ depends on LANTIQ
+ select MTD_PARTITIONS
+ help
+ Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 08533bd..cb48b11 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -8,7 +8,6 @@
# Chip mappings
obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
-obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
@@ -60,3 +59,4 @@
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
+obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
deleted file mode 100644
index e22ff5a..0000000
--- a/drivers/mtd/maps/integrator-flash.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*======================================================================
-
- drivers/mtd/maps/integrator-flash.c: ARM Integrator flash map driver
-
- Copyright (C) 2000 ARM Limited
- Copyright (C) 2003 Deep Blue Solutions Ltd.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- This is access code for flashes using ARM's flash partitioning
- standards.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-
-struct armflash_subdev_info {
- char *name;
- struct mtd_info *mtd;
- struct map_info map;
- struct flash_platform_data *plat;
-};
-
-struct armflash_info {
- struct resource *res;
- struct mtd_partition *parts;
- struct mtd_info *mtd;
- int nr_subdev;
- struct armflash_subdev_info subdev[0];
-};
-
-static void armflash_set_vpp(struct map_info *map, int on)
-{
- struct armflash_subdev_info *info =
- container_of(map, struct armflash_subdev_info, map);
-
- if (info->plat && info->plat->set_vpp)
- info->plat->set_vpp(on);
-}
-
-static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
-
-static int armflash_subdev_probe(struct armflash_subdev_info *subdev,
- struct resource *res)
-{
- struct flash_platform_data *plat = subdev->plat;
- resource_size_t size = res->end - res->start + 1;
- void __iomem *base;
- int err = 0;
-
- if (!request_mem_region(res->start, size, subdev->name)) {
- err = -EBUSY;
- goto out;
- }
-
- base = ioremap(res->start, size);
- if (!base) {
- err = -ENOMEM;
- goto no_mem;
- }
-
- /*
- * look for CFI based flash parts fitted to this board
- */
- subdev->map.size = size;
- subdev->map.bankwidth = plat->width;
- subdev->map.phys = res->start;
- subdev->map.virt = base;
- subdev->map.name = subdev->name;
- subdev->map.set_vpp = armflash_set_vpp;
-
- simple_map_init(&subdev->map);
-
- /*
- * Also, the CFI layer automatically works out what size
- * of chips we have, and does the necessary identification
- * for us automatically.
- */
- subdev->mtd = do_map_probe(plat->map_name, &subdev->map);
- if (!subdev->mtd) {
- err = -ENXIO;
- goto no_device;
- }
-
- subdev->mtd->owner = THIS_MODULE;
-
- /* Successful? */
- if (err == 0)
- return err;
-
- if (subdev->mtd)
- map_destroy(subdev->mtd);
- no_device:
- iounmap(base);
- no_mem:
- release_mem_region(res->start, size);
- out:
- return err;
-}
-
-static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
-{
- if (subdev->mtd)
- map_destroy(subdev->mtd);
- if (subdev->map.virt)
- iounmap(subdev->map.virt);
- kfree(subdev->name);
- subdev->name = NULL;
- release_mem_region(subdev->map.phys, subdev->map.size);
-}
-
-static int armflash_probe(struct platform_device *dev)
-{
- struct flash_platform_data *plat = dev->dev.platform_data;
- unsigned int size;
- struct armflash_info *info;
- int i, nr, err;
-
- /* Count the number of devices */
- for (nr = 0; ; nr++)
- if (!platform_get_resource(dev, IORESOURCE_MEM, nr))
- break;
- if (nr == 0) {
- err = -ENODEV;
- goto out;
- }
-
- size = sizeof(struct armflash_info) +
- sizeof(struct armflash_subdev_info) * nr;
- info = kzalloc(size, GFP_KERNEL);
- if (!info) {
- err = -ENOMEM;
- goto out;
- }
-
- if (plat && plat->init) {
- err = plat->init();
- if (err)
- goto no_resource;
- }
-
- for (i = 0; i < nr; i++) {
- struct armflash_subdev_info *subdev = &info->subdev[i];
- struct resource *res;
-
- res = platform_get_resource(dev, IORESOURCE_MEM, i);
- if (!res)
- break;
-
- if (nr == 1)
- /* No MTD concatenation, just use the default name */
- subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
- else
- subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
- dev_name(&dev->dev), i);
- if (!subdev->name) {
- err = -ENOMEM;
- break;
- }
- subdev->plat = plat;
-
- err = armflash_subdev_probe(subdev, res);
- if (err) {
- kfree(subdev->name);
- subdev->name = NULL;
- break;
- }
- }
- info->nr_subdev = i;
-
- if (err)
- goto subdev_err;
-
- if (info->nr_subdev == 1)
- info->mtd = info->subdev[0].mtd;
- else if (info->nr_subdev > 1) {
- struct mtd_info *cdev[info->nr_subdev];
-
- /*
- * We detected multiple devices. Concatenate them together.
- */
- for (i = 0; i < info->nr_subdev; i++)
- cdev[i] = info->subdev[i].mtd;
-
- info->mtd = mtd_concat_create(cdev, info->nr_subdev,
- dev_name(&dev->dev));
- if (info->mtd == NULL)
- err = -ENXIO;
- }
-
- if (err < 0)
- goto cleanup;
-
- err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
- if (err > 0) {
- err = add_mtd_partitions(info->mtd, info->parts, err);
- if (err)
- printk(KERN_ERR
- "mtd partition registration failed: %d\n", err);
- }
-
- if (err == 0) {
- platform_set_drvdata(dev, info);
- return err;
- }
-
- /*
- * We got an error, free all resources.
- */
- cleanup:
- if (info->mtd) {
- del_mtd_partitions(info->mtd);
- if (info->mtd != info->subdev[0].mtd)
- mtd_concat_destroy(info->mtd);
- }
- kfree(info->parts);
- subdev_err:
- for (i = info->nr_subdev - 1; i >= 0; i--)
- armflash_subdev_remove(&info->subdev[i]);
- no_resource:
- if (plat && plat->exit)
- plat->exit();
- kfree(info);
- out:
- return err;
-}
-
-static int armflash_remove(struct platform_device *dev)
-{
- struct armflash_info *info = platform_get_drvdata(dev);
- struct flash_platform_data *plat = dev->dev.platform_data;
- int i;
-
- platform_set_drvdata(dev, NULL);
-
- if (info) {
- if (info->mtd) {
- del_mtd_partitions(info->mtd);
- if (info->mtd != info->subdev[0].mtd)
- mtd_concat_destroy(info->mtd);
- }
- kfree(info->parts);
-
- for (i = info->nr_subdev - 1; i >= 0; i--)
- armflash_subdev_remove(&info->subdev[i]);
-
- if (plat && plat->exit)
- plat->exit();
-
- kfree(info);
- }
-
- return 0;
-}
-
-static struct platform_driver armflash_driver = {
- .probe = armflash_probe,
- .remove = armflash_remove,
- .driver = {
- .name = "armflash",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init armflash_init(void)
-{
- return platform_driver_register(&armflash_driver);
-}
-
-static void __exit armflash_exit(void)
-{
- platform_driver_unregister(&armflash_driver);
-}
-
-module_init(armflash_init);
-module_exit(armflash_exit);
-
-MODULE_AUTHOR("ARM Ltd");
-MODULE_DESCRIPTION("ARM Integrator CFI map driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:armflash");
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
new file mode 100644
index 0000000..a90cabd
--- /dev/null
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -0,0 +1,251 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+/*
+ * The NOR flash is connected to the same external bus unit (EBU) as PCI.
+ * To make PCI work we need to enable the endianness swapping for the address
+ * written to the EBU. This endianness swapping works for PCI correctly but
+ * fails for attached NOR devices. To workaround this we need to use a complex
+ * map. The workaround involves swapping all addresses whilst probing the chip.
+ * Once probing is complete we stop swapping the addresses but swizzle the
+ * unlock addresses to ensure that access to the NOR device works correctly.
+ */
+
+enum {
+ LTQ_NOR_PROBING,
+ LTQ_NOR_NORMAL
+};
+
+struct ltq_mtd {
+ struct resource *res;
+ struct mtd_info *mtd;
+ struct map_info *map;
+};
+
+static char ltq_map_name[] = "ltq_nor";
+
+static map_word
+ltq_read16(struct map_info *map, unsigned long adr)
+{
+ unsigned long flags;
+ map_word temp;
+
+ if (map->map_priv_1 == LTQ_NOR_PROBING)
+ adr ^= 2;
+ spin_lock_irqsave(&ebu_lock, flags);
+ temp.x[0] = *(u16 *)(map->virt + adr);
+ spin_unlock_irqrestore(&ebu_lock, flags);
+ return temp;
+}
+
+static void
+ltq_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+ unsigned long flags;
+
+ if (map->map_priv_1 == LTQ_NOR_PROBING)
+ adr ^= 2;
+ spin_lock_irqsave(&ebu_lock, flags);
+ *(u16 *)(map->virt + adr) = d.x[0];
+ spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/*
+ * The following 2 functions copy data between iomem and a cached memory
+ * section. As memcpy() makes use of pre-fetching we cannot use it here.
+ * The normal alternative of using memcpy_{to,from}io also makes use of
+ * memcpy() on MIPS so it is not applicable either. We are therefore stuck
+ * with having to use our own loop.
+ */
+static void
+ltq_copy_from(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+{
+ unsigned char *f = (unsigned char *)map->virt + from;
+ unsigned char *t = (unsigned char *)to;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+ while (len--)
+ *t++ = *f++;
+ spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void
+ltq_copy_to(struct map_info *map, unsigned long to,
+ const void *from, ssize_t len)
+{
+ unsigned char *f = (unsigned char *)from;
+ unsigned char *t = (unsigned char *)map->virt + to;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+ while (len--)
+ *t++ = *f++;
+ spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static const char const *part_probe_types[] = { "cmdlinepart", NULL };
+
+static int __init
+ltq_mtd_probe(struct platform_device *pdev)
+{
+ struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+ struct ltq_mtd *ltq_mtd;
+ struct mtd_partition *parts;
+ struct resource *res;
+ int nr_parts = 0;
+ struct cfi_private *cfi;
+ int err;
+
+ ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL);
+ platform_set_drvdata(pdev, ltq_mtd);
+
+ ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ltq_mtd->res) {
+ dev_err(&pdev->dev, "failed to get memory resource");
+ err = -ENOENT;
+ goto err_out;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start,
+ resource_size(ltq_mtd->res), dev_name(&pdev->dev));
+ if (!ltq_mtd->res) {
+ dev_err(&pdev->dev, "failed to request mem resource");
+ err = -EBUSY;
+ goto err_out;
+ }
+
+ ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
+ ltq_mtd->map->phys = res->start;
+ ltq_mtd->map->size = resource_size(res);
+ ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev,
+ ltq_mtd->map->phys, ltq_mtd->map->size);
+ if (!ltq_mtd->map->virt) {
+ dev_err(&pdev->dev, "failed to ioremap!\n");
+ err = -ENOMEM;
+ goto err_free;
+ }
+
+ ltq_mtd->map->name = ltq_map_name;
+ ltq_mtd->map->bankwidth = 2;
+ ltq_mtd->map->read = ltq_read16;
+ ltq_mtd->map->write = ltq_write16;
+ ltq_mtd->map->copy_from = ltq_copy_from;
+ ltq_mtd->map->copy_to = ltq_copy_to;
+
+ ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+ ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
+ ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+
+ if (!ltq_mtd->mtd) {
+ dev_err(&pdev->dev, "probing failed\n");
+ err = -ENXIO;
+ goto err_unmap;
+ }
+
+ ltq_mtd->mtd->owner = THIS_MODULE;
+
+ cfi = ltq_mtd->map->fldrv_priv;
+ cfi->addr_unlock1 ^= 1;
+ cfi->addr_unlock2 ^= 1;
+
+ nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
+ part_probe_types, &parts, 0);
+ if (nr_parts > 0) {
+ dev_info(&pdev->dev,
+ "using %d partitions from cmdline", nr_parts);
+ } else {
+ nr_parts = ltq_mtd_data->nr_parts;
+ parts = ltq_mtd_data->parts;
+ }
+
+ err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+ if (err) {
+ dev_err(&pdev->dev, "failed to add partitions\n");
+ goto err_destroy;
+ }
+
+ return 0;
+
+err_destroy:
+ map_destroy(ltq_mtd->mtd);
+err_unmap:
+ iounmap(ltq_mtd->map->virt);
+err_free:
+ kfree(ltq_mtd->map);
+err_out:
+ kfree(ltq_mtd);
+ return err;
+}
+
+static int __devexit
+ltq_mtd_remove(struct platform_device *pdev)
+{
+ struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
+
+ if (ltq_mtd) {
+ if (ltq_mtd->mtd) {
+ del_mtd_partitions(ltq_mtd->mtd);
+ map_destroy(ltq_mtd->mtd);
+ }
+ if (ltq_mtd->map->virt)
+ iounmap(ltq_mtd->map->virt);
+ kfree(ltq_mtd->map);
+ kfree(ltq_mtd);
+ }
+ return 0;
+}
+
+static struct platform_driver ltq_mtd_driver = {
+ .remove = __devexit_p(ltq_mtd_remove),
+ .driver = {
+ .name = "ltq_nor",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init
+init_ltq_mtd(void)
+{
+ int ret = platform_driver_probe(<q_mtd_driver, ltq_mtd_probe);
+
+ if (ret)
+ pr_err("ltq_nor: error registering platform driver");
+ return ret;
+}
+
+static void __exit
+exit_ltq_mtd(void)
+{
+ platform_driver_unregister(<q_mtd_driver);
+}
+
+module_init(init_ltq_mtd);
+module_exit(exit_ltq_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC NOR");
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 7522df4..1a9b94f 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -67,9 +67,25 @@
if (info->mtd[i] != NULL)
map_destroy(info->mtd[i]);
}
+
+ if (physmap_data->exit)
+ physmap_data->exit(dev);
+
return 0;
}
+static void physmap_set_vpp(struct map_info *map, int state)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *physmap_data;
+
+ pdev = (struct platform_device *)map->map_priv_1;
+ physmap_data = pdev->dev.platform_data;
+
+ if (physmap_data->set_vpp)
+ physmap_data->set_vpp(pdev, state);
+}
+
static const char *rom_probe_types[] = {
"cfi_probe",
"jedec_probe",
@@ -77,7 +93,8 @@
"map_rom",
NULL };
#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "afs",
+ NULL };
#endif
static int physmap_flash_probe(struct platform_device *dev)
@@ -100,6 +117,12 @@
goto err_out;
}
+ if (physmap_data->init) {
+ err = physmap_data->init(dev);
+ if (err)
+ goto err_out;
+ }
+
platform_set_drvdata(dev, info);
for (i = 0; i < dev->num_resources; i++) {
@@ -120,8 +143,9 @@
info->map[i].phys = dev->resource[i].start;
info->map[i].size = resource_size(&dev->resource[i]);
info->map[i].bankwidth = physmap_data->width;
- info->map[i].set_vpp = physmap_data->set_vpp;
+ info->map[i].set_vpp = physmap_set_vpp;
info->map[i].pfow_base = physmap_data->pfow_base;
+ info->map[i].map_priv_1 = (unsigned long)dev;
info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
info->map[i].size);
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index bd483f0..c1d3346 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -214,11 +214,13 @@
}
#endif
+static struct of_device_id of_flash_match[];
static int __devinit of_flash_probe(struct platform_device *dev)
{
#ifdef CONFIG_MTD_PARTITIONS
const char **part_probe_types;
#endif
+ const struct of_device_id *match;
struct device_node *dp = dev->dev.of_node;
struct resource res;
struct of_flash *info;
@@ -232,9 +234,10 @@
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
- if (!dev->dev.of_match)
+ match = of_match_device(of_flash_match, &dev->dev);
+ if (!match)
return -EINVAL;
- probe_type = dev->dev.of_match->data;
+ probe_type = match->data;
reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index f4ce273..65bd1cd 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -50,39 +50,13 @@
struct platform_device *dev[PISMO_NUM_CS];
};
-/* FIXME: set_vpp could do with a better calling convention */
-static struct pismo_data *vpp_pismo;
-static DEFINE_MUTEX(pismo_mutex);
-
-static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+static void pismo_set_vpp(struct platform_device *pdev, int on)
{
- mutex_lock(&pismo_mutex);
- if (vpp_pismo) {
- mutex_unlock(&pismo_mutex);
- kfree(pismo);
- return -EBUSY;
- }
- vpp_pismo = pismo;
- mutex_unlock(&pismo_mutex);
- return 0;
-}
-
-static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
-{
- mutex_lock(&pismo_mutex);
- if (vpp_pismo == pismo)
- vpp_pismo = NULL;
- mutex_unlock(&pismo_mutex);
-}
-
-static void pismo_set_vpp(struct map_info *map, int on)
-{
- struct pismo_data *pismo = vpp_pismo;
+ struct i2c_client *client = to_i2c_client(pdev->dev.parent);
+ struct pismo_data *pismo = i2c_get_clientdata(client);
pismo->vpp(pismo->vpp_data, on);
}
-/* end of hack */
-
static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
{
@@ -231,9 +205,6 @@
for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
platform_device_unregister(pismo->dev[i]);
- /* FIXME: set_vpp needs saner arguments */
- pismo_setvpp_remove_fix(pismo);
-
kfree(pismo);
return 0;
@@ -257,11 +228,6 @@
if (!pismo)
return -ENOMEM;
- /* FIXME: set_vpp needs saner arguments */
- ret = pismo_setvpp_probe_fix(pismo);
- if (ret)
- return ret;
-
pismo->client = client;
if (pdata) {
pismo->vpp = pdata->set_vpp;
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 3ffe05d..5d513b5 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -10,6 +10,7 @@
*/
#include <linux/slab.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -470,7 +471,7 @@
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
- au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+ gpio_direction_input(206);
boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 91abb96..5f25889 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -185,7 +185,7 @@
static int nopnp;
#endif
-static int __devinit el3_common_init(struct net_device *dev);
+static int el3_common_init(struct net_device *dev);
static void el3_common_remove(struct net_device *dev);
static ushort id_read_eeprom(int index);
static ushort read_eeprom(int ioaddr, int index);
@@ -395,7 +395,7 @@
static int isa_registered;
#ifdef CONFIG_PNP
-static struct pnp_device_id el3_pnp_ids[] = {
+static const struct pnp_device_id el3_pnp_ids[] __devinitconst = {
{ .id = "TCM5090" }, /* 3Com Etherlink III (TP) */
{ .id = "TCM5091" }, /* 3Com Etherlink III */
{ .id = "TCM5094" }, /* 3Com Etherlink III (combo) */
@@ -478,7 +478,7 @@
#endif /* CONFIG_PNP */
#ifdef CONFIG_EISA
-static struct eisa_device_id el3_eisa_ids[] = {
+static const struct eisa_device_id el3_eisa_ids[] __devinitconst = {
{ "TCM5090" },
{ "TCM5091" },
{ "TCM5092" },
@@ -508,7 +508,7 @@
#ifdef CONFIG_MCA
static int el3_mca_probe(struct device *dev);
-static short el3_mca_adapter_ids[] __initdata = {
+static const short el3_mca_adapter_ids[] __devinitconst = {
0x627c,
0x627d,
0x62db,
@@ -517,7 +517,7 @@
0x0000
};
-static char *el3_mca_adapter_names[] __initdata = {
+static const char *const el3_mca_adapter_names[] __devinitconst = {
"3Com 3c529 EtherLink III (10base2)",
"3Com 3c529 EtherLink III (10baseT)",
"3Com 3c529 EtherLink III (test mode)",
@@ -601,7 +601,7 @@
}
#ifdef CONFIG_MCA
-static int __init el3_mca_probe(struct device *device)
+static int __devinit el3_mca_probe(struct device *device)
{
/* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch,
* heavily modified by Chris Beauregard
@@ -671,7 +671,7 @@
#endif /* CONFIG_MCA */
#ifdef CONFIG_EISA
-static int __init el3_eisa_probe (struct device *device)
+static int __devinit el3_eisa_probe (struct device *device)
{
short i;
int ioaddr, irq, if_port;
@@ -1207,7 +1207,7 @@
ecmd->duplex = DUPLEX_FULL;
}
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
EL3WINDOW(1);
return 0;
}
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 8cc2256..99f43d2 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -901,14 +901,14 @@
#endif /* !CONFIG_PM */
#ifdef CONFIG_EISA
-static struct eisa_device_id vortex_eisa_ids[] = {
+static const struct eisa_device_id vortex_eisa_ids[] __devinitconst = {
{ "TCM5920", CH_3C592 },
{ "TCM5970", CH_3C597 },
{ "" }
};
MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
-static int __init vortex_eisa_probe(struct device *device)
+static int __devinit vortex_eisa_probe(struct device *device)
{
void __iomem *ioaddr;
struct eisa_device *edev;
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index dd16e83..10c4505 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -758,8 +758,7 @@
entry = cp->tx_head;
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
- if (dev->features & NETIF_F_TSO)
- mss = skb_shinfo(skb)->gso_size;
+ mss = skb_shinfo(skb)->gso_size;
if (skb_shinfo(skb)->nr_frags == 0) {
struct cp_desc *txd = &cp->tx_ring[entry];
@@ -1416,32 +1415,23 @@
cp->msg_enable = value;
}
-static u32 cp_get_rx_csum(struct net_device *dev)
+static int cp_set_features(struct net_device *dev, u32 features)
{
struct cp_private *cp = netdev_priv(dev);
- return (cpr16(CpCmd) & RxChkSum) ? 1 : 0;
-}
+ unsigned long flags;
-static int cp_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct cp_private *cp = netdev_priv(dev);
- u16 cmd = cp->cpcmd, newcmd;
+ if (!((dev->features ^ features) & NETIF_F_RXCSUM))
+ return 0;
- newcmd = cmd;
+ spin_lock_irqsave(&cp->lock, flags);
- if (data)
- newcmd |= RxChkSum;
+ if (features & NETIF_F_RXCSUM)
+ cp->cpcmd |= RxChkSum;
else
- newcmd &= ~RxChkSum;
+ cp->cpcmd &= ~RxChkSum;
- if (newcmd != cmd) {
- unsigned long flags;
-
- spin_lock_irqsave(&cp->lock, flags);
- cp->cpcmd = newcmd;
- cpw16_f(CpCmd, newcmd);
- spin_unlock_irqrestore(&cp->lock, flags);
- }
+ cpw16_f(CpCmd, cp->cpcmd);
+ spin_unlock_irqrestore(&cp->lock, flags);
return 0;
}
@@ -1554,11 +1544,6 @@
.get_link = ethtool_op_get_link,
.get_msglevel = cp_get_msglevel,
.set_msglevel = cp_set_msglevel,
- .get_rx_csum = cp_get_rx_csum,
- .set_rx_csum = cp_set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum, /* local! */
- .set_sg = ethtool_op_set_sg,
- .set_tso = ethtool_op_set_tso,
.get_regs = cp_get_regs,
.get_wol = cp_get_wol,
.set_wol = cp_set_wol,
@@ -1831,6 +1816,7 @@
.ndo_do_ioctl = cp_ioctl,
.ndo_start_xmit = cp_start_xmit,
.ndo_tx_timeout = cp_tx_timeout,
+ .ndo_set_features = cp_set_features,
#if CP_VLAN_TAG_USED
.ndo_vlan_rx_register = cp_vlan_rx_register,
#endif
@@ -1934,6 +1920,9 @@
cp->cpcmd = (pci_using_dac ? PCIDAC : 0) |
PCIMulRW | RxChkSum | CpRxOn | CpTxOn;
+ dev->features |= NETIF_F_RXCSUM;
+ dev->hw_features |= NETIF_F_RXCSUM;
+
regs = ioremap(pciaddr, CP_REGS_SIZE);
if (!regs) {
rc = -EIO;
@@ -1966,9 +1955,8 @@
if (pci_using_dac)
dev->features |= NETIF_F_HIGHDMA;
-#if 0 /* disabled by default until verified */
- dev->features |= NETIF_F_TSO;
-#endif
+ /* disabled by default until verified */
+ dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
dev->irq = pdev->irq;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dc280bc..19f04a3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2017,6 +2017,13 @@
from Faraday. It is used on Faraday A320, Andes AG101 and some
other ARM/NDS32 SoC's.
+config LANTIQ_ETOP
+ tristate "Lantiq SoC ETOP driver"
+ depends on SOC_TYPE_XWAY
+ help
+ Support for the MII0 inside the Lantiq SoC
+
+
source "drivers/net/fs_enet/Kconfig"
source "drivers/net/octeon/Kconfig"
@@ -2536,7 +2543,7 @@
source "drivers/net/stmmac/Kconfig"
config PCH_GBE
- tristate "PCH Gigabit Ethernet"
+ tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
depends on PCI
select MII
---help---
@@ -2548,6 +2555,12 @@
to Gigabit Ethernet.
This driver enables Gigabit Ethernet function.
+ This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+ Output Hub), ML7223.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7223 is companion chip for Intel Atom E6xx series.
+ ML7223 is completely compatible for Intel EG20T PCH.
+
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 01b604a..209fbb7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -144,7 +144,7 @@
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o
obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
@@ -219,7 +219,7 @@
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
@@ -231,7 +231,7 @@
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_HYDRA) += hydra.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
@@ -259,6 +259,7 @@
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_GRETH) += greth.o
+obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index ee648fe..d7c1bfe4 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -68,6 +68,7 @@
#include <linux/sockios.h>
#include <linux/firmware.h>
#include <linux/slab.h>
+#include <linux/prefetch.h>
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#include <linux/if_vlan.h>
@@ -2658,15 +2659,15 @@
link = readl(®s->GigLnkState);
if (link & LNK_1000MB)
- ecmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
else {
link = readl(®s->FastLnkState);
if (link & LNK_100MB)
- ecmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
else if (link & LNK_10MB)
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
else
- ecmd->speed = 0;
+ ethtool_cmd_speed_set(ecmd, 0);
}
if (link & LNK_FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
@@ -2718,9 +2719,9 @@
link |= LNK_TX_FLOW_CTL_Y;
if (ecmd->autoneg == AUTONEG_ENABLE)
link |= LNK_NEGOTIATE;
- if (ecmd->speed != speed) {
+ if (ethtool_cmd_speed(ecmd) != speed) {
link &= ~(LNK_1000MB | LNK_100MB | LNK_10MB);
- switch (speed) {
+ switch (ethtool_cmd_speed(ecmd)) {
case SPEED_1000:
link |= LNK_1000MB;
break;
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 88495c4..241b185 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -106,7 +106,7 @@
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
module_param_array(speed_duplex, int, NULL, 0);
-MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
+MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
module_param_array(coalesce, bool, NULL, 0);
MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
module_param_array(dynamic_ipg, bool, NULL, 0);
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 4af235d..03e217a 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -527,7 +527,7 @@
* Read the ethernet address string from the on board rom.
* This is an ascii string...
*/
-static int __init etherh_addr(char *addr, struct expansion_card *ec)
+static int __devinit etherh_addr(char *addr, struct expansion_card *ec)
{
struct in_chunk_dir cd;
char *s;
@@ -591,10 +591,11 @@
static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
cmd->supported = etherh_priv(dev)->supported;
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_HALF;
cmd->port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
- cmd->autoneg = dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ cmd->autoneg = (dev->flags & IFF_AUTOMEDIA ?
+ AUTONEG_ENABLE : AUTONEG_DISABLE);
return 0;
}
@@ -655,7 +656,7 @@
static u32 etherh_regoffsets[16];
static u32 etherm_regoffsets[16];
-static int __init
+static int __devinit
etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
{
const struct etherh_data *data = id->data;
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index aa07657..a7b0caa 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -891,15 +891,16 @@
cmd->advertising |= ADVERTISED_Pause;
cmd->autoneg = AUTONEG_ENABLE;
- cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(cmd,
+ (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10);
cmd->duplex = (ctrl & WMC_WDS) ?
DUPLEX_FULL : DUPLEX_HALF;
} else {
/* auto-negotiation is disabled */
cmd->autoneg = AUTONEG_DISABLE;
- cmd->speed = (ctrl & WMC_WANF100) ?
- SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(cmd, ((ctrl & WMC_WANF100) ?
+ SPEED_100 : SPEED_10));
cmd->duplex = (ctrl & WMC_WANFF) ?
DUPLEX_FULL : DUPLEX_HALF;
}
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index ce0091e..1264d78 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -554,7 +554,7 @@
memaddr == (unsigned short *)0xffe00000) {
/* PAMs card and Riebl on ST use level 5 autovector */
if (request_irq(IRQ_AUTO_5, lance_interrupt, IRQ_TYPE_PRIO,
- "PAM/Riebl-ST Ethernet", dev)) {
+ "PAM,Riebl-ST Ethernet", dev)) {
printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
return 0;
}
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index 7cb375e..925929d 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -566,9 +566,9 @@
#define __AT_TESTING 0x0001
#define __AT_RESETTING 0x0002
#define __AT_DOWN 0x0003
- u8 work_event;
-#define ATL1C_WORK_EVENT_RESET 0x01
-#define ATL1C_WORK_EVENT_LINK_CHANGE 0x02
+ unsigned long work_event;
+#define ATL1C_WORK_EVENT_RESET 0
+#define ATL1C_WORK_EVENT_LINK_CHANGE 1
u32 msg_enable;
bool have_msi;
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index 7c52150..7be884d 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -50,13 +50,13 @@
ecmd->transceiver = XCVR_INTERNAL;
if (adapter->link_speed != SPEED_0) {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
if (adapter->link_duplex == FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -77,7 +77,8 @@
if (ecmd->autoneg == AUTONEG_ENABLE) {
autoneg_advertised = ADVERTISED_Autoneg;
} else {
- if (ecmd->speed == SPEED_1000) {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (speed == SPEED_1000) {
if (ecmd->duplex != DUPLEX_FULL) {
if (netif_msg_link(adapter))
dev_warn(&adapter->pdev->dev,
@@ -86,7 +87,7 @@
return -EINVAL;
}
autoneg_advertised = ADVERTISED_1000baseT_Full;
- } else if (ecmd->speed == SPEED_100) {
+ } else if (speed == SPEED_100) {
if (ecmd->duplex == DUPLEX_FULL)
autoneg_advertised = ADVERTISED_100baseT_Full;
else
@@ -113,11 +114,6 @@
return 0;
}
-static u32 atl1c_get_tx_csum(struct net_device *netdev)
-{
- return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
static u32 atl1c_get_msglevel(struct net_device *netdev)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
@@ -307,9 +303,6 @@
.get_link = ethtool_op_get_link,
.get_eeprom_len = atl1c_get_eeprom_len,
.get_eeprom = atl1c_get_eeprom,
- .get_tx_csum = atl1c_get_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
};
void atl1c_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 7d9d506..1269ba5 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -325,7 +325,7 @@
}
}
- adapter->work_event |= ATL1C_WORK_EVENT_LINK_CHANGE;
+ set_bit(ATL1C_WORK_EVENT_LINK_CHANGE, &adapter->work_event);
schedule_work(&adapter->common_task);
}
@@ -337,20 +337,16 @@
adapter = container_of(work, struct atl1c_adapter, common_task);
netdev = adapter->netdev;
- if (adapter->work_event & ATL1C_WORK_EVENT_RESET) {
- adapter->work_event &= ~ATL1C_WORK_EVENT_RESET;
+ if (test_and_clear_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event)) {
netif_device_detach(netdev);
atl1c_down(adapter);
atl1c_up(adapter);
netif_device_attach(netdev);
- return;
}
- if (adapter->work_event & ATL1C_WORK_EVENT_LINK_CHANGE) {
- adapter->work_event &= ~ATL1C_WORK_EVENT_LINK_CHANGE;
+ if (test_and_clear_bit(ATL1C_WORK_EVENT_LINK_CHANGE,
+ &adapter->work_event))
atl1c_check_link_status(adapter);
- }
- return;
}
@@ -369,7 +365,7 @@
struct atl1c_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
- adapter->work_event |= ATL1C_WORK_EVENT_RESET;
+ set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event);
schedule_work(&adapter->common_task);
}
@@ -484,6 +480,15 @@
adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
}
+
+static u32 atl1c_fix_features(struct net_device *netdev, u32 features)
+{
+ if (netdev->mtu > MAX_TSO_FRAME_SIZE)
+ features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+ return features;
+}
+
/*
* atl1c_change_mtu - Change the Maximum Transfer Unit
* @netdev: network interface device structure
@@ -510,14 +515,8 @@
netdev->mtu = new_mtu;
adapter->hw.max_frame_size = new_mtu;
atl1c_set_rxbufsize(adapter, netdev);
- if (new_mtu > MAX_TSO_FRAME_SIZE) {
- adapter->netdev->features &= ~NETIF_F_TSO;
- adapter->netdev->features &= ~NETIF_F_TSO6;
- } else {
- adapter->netdev->features |= NETIF_F_TSO;
- adapter->netdev->features |= NETIF_F_TSO6;
- }
atl1c_down(adapter);
+ netdev_update_features(netdev);
atl1c_up(adapter);
clear_bit(__AT_RESETTING, &adapter->flags);
if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
@@ -1092,10 +1091,8 @@
u32 max_pay_load;
u16 tx_offload_thresh;
u32 txq_ctrl_data;
- u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */
u32 max_pay_load_data;
- extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
(tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
@@ -2540,6 +2537,7 @@
return 0;
}
+#ifdef CONFIG_PM_SLEEP
static int atl1c_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
@@ -2566,6 +2564,7 @@
return 0;
}
+#endif
static void atl1c_shutdown(struct pci_dev *pdev)
{
@@ -2585,6 +2584,7 @@
.ndo_set_mac_address = atl1c_set_mac_addr,
.ndo_set_multicast_list = atl1c_set_multi,
.ndo_change_mtu = atl1c_change_mtu,
+ .ndo_fix_features = atl1c_fix_features,
.ndo_do_ioctl = atl1c_ioctl,
.ndo_tx_timeout = atl1c_tx_timeout,
.ndo_get_stats = atl1c_get_stats,
@@ -2605,12 +2605,13 @@
atl1c_set_ethtool_ops(netdev);
/* TODO: add when ready */
- netdev->features = NETIF_F_SG |
+ netdev->hw_features = NETIF_F_SG |
NETIF_F_HW_CSUM |
NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
NETIF_F_TSO |
NETIF_F_TSO6;
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_RX;
return 0;
}
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 1209297..6269438 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -51,13 +51,13 @@
ecmd->transceiver = XCVR_INTERNAL;
if (adapter->link_speed != SPEED_0) {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
if (adapter->link_duplex == FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -382,9 +382,6 @@
.get_eeprom_len = atl1e_get_eeprom_len,
.get_eeprom = atl1e_get_eeprom,
.set_eeprom = atl1e_set_eeprom,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = ethtool_op_set_tso,
};
void atl1e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index b0a71e2..86a9122 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -691,10 +691,8 @@
static void atl1e_init_ring_resources(struct atl1e_adapter *adapter)
{
- struct atl1e_tx_ring *tx_ring = NULL;
struct atl1e_rx_ring *rx_ring = NULL;
- tx_ring = &adapter->tx_ring;
rx_ring = &adapter->rx_ring;
rx_ring->real_page_size = adapter->rx_ring.page_size
@@ -1927,11 +1925,7 @@
* reschedule our watchdog timer */
set_bit(__AT_DOWN, &adapter->flags);
-#ifdef NETIF_F_LLTX
netif_stop_queue(netdev);
-#else
- netif_tx_disable(netdev);
-#endif
/* reset MAC to disable all RX/TX */
atl1e_reset_hw(&adapter->hw);
@@ -2223,10 +2217,10 @@
netdev->watchdog_timeo = AT_TX_WATCHDOG;
atl1e_set_ethtool_ops(netdev);
- netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- netdev->features |= NETIF_F_LLTX;
- netdev->features |= NETIF_F_TSO;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO |
+ NETIF_F_HW_VLAN_TX;
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_LLTX;
return 0;
}
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 67f40b9..c5298d1 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2074,9 +2074,6 @@
cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
- struct tx_packet_desc *tpd;
-
- tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
if (buffer_info->dma) {
pci_unmap_page(adapter->pdev, buffer_info->dma,
@@ -2572,7 +2569,7 @@
{
struct net_device *netdev = adapter->netdev;
int err;
- int irq_flags = IRQF_SAMPLE_RANDOM;
+ int irq_flags = 0;
/* hardware has been reset, we need to reload some things */
atlx_set_multi(netdev);
@@ -2986,6 +2983,11 @@
netdev->features |= NETIF_F_SG;
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
+ netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ /* is this valid? see atl1_setup_mac_ctrl() */
+ netdev->features |= NETIF_F_RXCSUM;
+
/*
* patch for some L1 of old version,
* the final version of L1 may not need these
@@ -3229,13 +3231,13 @@
if (netif_carrier_ok(adapter->netdev)) {
u16 link_speed, link_duplex;
atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
- ecmd->speed = link_speed;
+ ethtool_cmd_speed_set(ecmd, link_speed);
if (link_duplex == FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
@@ -3266,7 +3268,8 @@
if (ecmd->autoneg == AUTONEG_ENABLE)
hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
else {
- if (ecmd->speed == SPEED_1000) {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (speed == SPEED_1000) {
if (ecmd->duplex != DUPLEX_FULL) {
if (netif_msg_link(adapter))
dev_warn(&adapter->pdev->dev,
@@ -3275,7 +3278,7 @@
goto exit_sset;
}
hw->media_type = MEDIA_TYPE_1000M_FULL;
- } else if (ecmd->speed == SPEED_100) {
+ } else if (speed == SPEED_100) {
if (ecmd->duplex == DUPLEX_FULL)
hw->media_type = MEDIA_TYPE_100M_FULL;
else
@@ -3595,12 +3598,6 @@
return 0;
}
-/* FIXME: is this right? -- CHS */
-static u32 atl1_get_rx_csum(struct net_device *netdev)
-{
- return 1;
-}
-
static void atl1_get_strings(struct net_device *netdev, u32 stringset,
u8 *data)
{
@@ -3668,13 +3665,9 @@
.set_ringparam = atl1_set_ringparam,
.get_pauseparam = atl1_get_pauseparam,
.set_pauseparam = atl1_set_pauseparam,
- .get_rx_csum = atl1_get_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_link = ethtool_op_get_link,
- .set_sg = ethtool_op_set_sg,
.get_strings = atl1_get_strings,
.nway_reset = atl1_nway_reset,
.get_ethtool_stats = atl1_get_ethtool_stats,
.get_sset_count = atl1_get_sset_count,
- .set_tso = ethtool_op_set_tso,
};
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index e3cbf45..16249e9 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1411,9 +1411,8 @@
err = -EIO;
-#ifdef NETIF_F_HW_VLAN_TX
+ netdev->hw_features = NETIF_F_SG;
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
-#endif
/* Init PHY as early as possible due to power saving issue */
atl2_phy_init(&adapter->hw);
@@ -1770,13 +1769,13 @@
ecmd->transceiver = XCVR_INTERNAL;
if (adapter->link_speed != SPEED_0) {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
if (adapter->link_duplex == FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -1840,11 +1839,6 @@
return 0;
}
-static u32 atl2_get_tx_csum(struct net_device *netdev)
-{
- return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
static u32 atl2_get_msglevel(struct net_device *netdev)
{
return 0;
@@ -2112,12 +2106,6 @@
.get_eeprom_len = atl2_get_eeprom_len,
.get_eeprom = atl2_get_eeprom,
.set_eeprom = atl2_set_eeprom,
- .get_tx_csum = atl2_get_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
-#ifdef NETIF_F_TSO
- .get_tso = ethtool_op_get_tso,
-#endif
};
static void atl2_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 2e2b762..a69331e 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1807,8 +1807,8 @@
if (bp->flags & B44_FLAG_ADV_100FULL)
cmd->advertising |= ADVERTISED_100baseT_Full;
cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
- cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
- SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(cmd, ((bp->flags & B44_FLAG_100_BASE_T) ?
+ SPEED_100 : SPEED_10));
cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
DUPLEX_FULL : DUPLEX_HALF;
cmd->port = 0;
@@ -1820,7 +1820,7 @@
if (cmd->autoneg == AUTONEG_ENABLE)
cmd->advertising |= ADVERTISED_Autoneg;
if (!netif_running(dev)){
- cmd->speed = 0;
+ ethtool_cmd_speed_set(cmd, 0);
cmd->duplex = 0xff;
}
cmd->maxtxpkt = 0;
@@ -1831,6 +1831,7 @@
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct b44 *bp = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
/* We do not support gigabit. */
if (cmd->autoneg == AUTONEG_ENABLE) {
@@ -1838,8 +1839,8 @@
(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full))
return -EINVAL;
- } else if ((cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10) ||
+ } else if ((speed != SPEED_100 &&
+ speed != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)) {
return -EINVAL;
@@ -1873,7 +1874,7 @@
} else {
bp->flags |= B44_FLAG_FORCE_LINK;
bp->flags &= ~(B44_FLAG_100_BASE_T | B44_FLAG_FULL_DUPLEX);
- if (cmd->speed == SPEED_100)
+ if (speed == SPEED_100)
bp->flags |= B44_FLAG_100_BASE_T;
if (cmd->duplex == DUPLEX_FULL)
bp->flags |= B44_FLAG_FULL_DUPLEX;
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index c48104b..f1573d4 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -839,8 +839,8 @@
if (ret)
goto out_phy_disconnect;
- ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
- IRQF_SAMPLE_RANDOM | IRQF_DISABLED, dev->name, dev);
+ ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, IRQF_DISABLED,
+ dev->name, dev);
if (ret)
goto out_freeirq;
@@ -1346,7 +1346,8 @@
return phy_ethtool_gset(priv->phydev, cmd);
} else {
cmd->autoneg = 0;
- cmd->speed = (priv->force_speed_100) ? SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(cmd, ((priv->force_speed_100)
+ ? SPEED_100 : SPEED_10));
cmd->duplex = (priv->force_duplex_full) ?
DUPLEX_FULL : DUPLEX_HALF;
cmd->supported = ADVERTISED_10baseT_Half |
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 66823ed..a7db870 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -49,6 +49,7 @@
#define OC_DEVICE_ID1 0x700 /* Device Id for BE2 cards */
#define OC_DEVICE_ID2 0x710 /* Device Id for BE3 cards */
#define OC_DEVICE_ID3 0xe220 /* Device id for Lancer cards */
+#define OC_DEVICE_ID4 0xe228 /* Device id for VF in Lancer */
static inline char *nic_name(struct pci_dev *pdev)
{
@@ -58,6 +59,7 @@
case OC_DEVICE_ID2:
return OC_NAME_BE;
case OC_DEVICE_ID3:
+ case OC_DEVICE_ID4:
return OC_NAME_LANCER;
case BE_DEVICE_ID2:
return BE3_NAME;
@@ -84,15 +86,14 @@
#define MCC_CQ_LEN 256
#define MAX_RSS_QS 4 /* BE limit is 4 queues/port */
-#define BE_MAX_MSIX_VECTORS (MAX_RSS_QS + 1 + 1)/* RSS qs + 1 def Rx + Tx */
+#define MAX_RX_QS (MAX_RSS_QS + 1) /* RSS qs + 1 def Rx */
+#define BE_MAX_MSIX_VECTORS (MAX_RX_QS + 1)/* RX + TX */
#define BE_NAPI_WEIGHT 64
#define MAX_RX_POST BE_NAPI_WEIGHT /* Frags posted at a time */
#define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST)
#define FW_VER_LEN 32
-#define BE_MAX_VF 32
-
struct be_dma_mem {
void *va;
dma_addr_t dma;
@@ -213,7 +214,7 @@
struct be_rx_compl_info {
u32 rss_hash;
- u16 vid;
+ u16 vlan_tag;
u16 pkt_size;
u16 rxq_idx;
u16 mac_id;
@@ -245,6 +246,43 @@
struct be_drv_stats {
u8 be_on_die_temperature;
+ u64 be_tx_events;
+ u64 eth_red_drops;
+ u64 rx_drops_no_pbuf;
+ u64 rx_drops_no_txpb;
+ u64 rx_drops_no_erx_descr;
+ u64 rx_drops_no_tpre_descr;
+ u64 rx_drops_too_many_frags;
+ u64 rx_drops_invalid_ring;
+ u64 forwarded_packets;
+ u64 rx_drops_mtu;
+ u64 rx_crc_errors;
+ u64 rx_alignment_symbol_errors;
+ u64 rx_pause_frames;
+ u64 rx_priority_pause_frames;
+ u64 rx_control_frames;
+ u64 rx_in_range_errors;
+ u64 rx_out_range_errors;
+ u64 rx_frame_too_long;
+ u64 rx_address_match_errors;
+ u64 rx_dropped_too_small;
+ u64 rx_dropped_too_short;
+ u64 rx_dropped_header_too_small;
+ u64 rx_dropped_tcp_length;
+ u64 rx_dropped_runt;
+ u64 rx_ip_checksum_errs;
+ u64 rx_tcp_checksum_errs;
+ u64 rx_udp_checksum_errs;
+ u64 rx_switched_unicast_packets;
+ u64 rx_switched_multicast_packets;
+ u64 rx_switched_broadcast_packets;
+ u64 tx_pauseframes;
+ u64 tx_priority_pauseframes;
+ u64 tx_controlframes;
+ u64 rxpp_fifo_overflow_drop;
+ u64 rx_input_fifo_overflow_drop;
+ u64 pmem_fifo_overflow_drop;
+ u64 jabber_events;
};
struct be_vf_cfg {
@@ -276,7 +314,7 @@
spinlock_t mcc_cq_lock;
struct msix_entry msix_entries[BE_MAX_MSIX_VECTORS];
- bool msix_enabled;
+ u32 num_msix_vec;
bool isr_registered;
/* TX Rings */
@@ -287,7 +325,7 @@
u32 cache_line_break[8];
/* Rx rings */
- struct be_rx_obj rx_obj[MAX_RSS_QS + 1]; /* one default non-rss Q */
+ struct be_rx_obj rx_obj[MAX_RX_QS];
u32 num_rx_qs;
u32 big_page_size; /* Compounded page size shared by rx wrbs */
@@ -308,10 +346,10 @@
u16 work_counter;
/* Ethtool knobs and info */
- bool rx_csum; /* BE card must perform rx-checksumming */
char fw_ver[FW_VER_LEN];
u32 if_handle; /* Used to configure filtering */
u32 pmac_id; /* MAC addr handle used by BE card */
+ u32 beacon_state; /* for set_phys_id */
bool eeh_err;
bool link_up;
@@ -334,7 +372,7 @@
bool be3_native;
bool sriov_enabled;
- struct be_vf_cfg vf_cfg[BE_MAX_VF];
+ struct be_vf_cfg *vf_cfg;
u8 is_virtfn;
u32 sli_family;
u8 hba_port_num;
@@ -347,10 +385,12 @@
#define BE_GEN2 2
#define BE_GEN3 3
-#define lancer_chip(adapter) (adapter->pdev->device == OC_DEVICE_ID3)
+#define lancer_chip(adapter) ((adapter->pdev->device == OC_DEVICE_ID3) || \
+ (adapter->pdev->device == OC_DEVICE_ID4))
extern const struct ethtool_ops be_ethtool_ops;
+#define msix_enabled(adapter) (adapter->num_msix_vec > 0)
#define tx_stats(adapter) (&adapter->tx_stats)
#define rx_stats(rxo) (&rxo->stats)
@@ -455,18 +495,10 @@
static inline void be_check_sriov_fn_type(struct be_adapter *adapter)
{
- u8 data;
u32 sli_intf;
- if (lancer_chip(adapter)) {
- pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET,
- &sli_intf);
- adapter->is_virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
- } else {
- pci_write_config_byte(adapter->pdev, 0xFE, 0xAA);
- pci_read_config_byte(adapter->pdev, 0xFE, &data);
- adapter->is_virtfn = (data != 0xAA);
- }
+ pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf);
+ adapter->is_virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
}
static inline void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac)
@@ -482,9 +514,15 @@
memcpy(mac, adapter->netdev->dev_addr, 3);
}
+static inline bool be_multi_rxq(const struct be_adapter *adapter)
+{
+ return adapter->num_rx_qs > 1;
+}
+
extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
u16 num_popped);
extern void be_link_status_update(struct be_adapter *adapter, bool link_up);
extern void netdev_stats_update(struct be_adapter *adapter);
+extern void be_parse_stats(struct be_adapter *adapter);
extern int be_load_fw(struct be_adapter *adapter, u8 *func);
#endif /* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 1e2d825..2463b1c 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -71,18 +71,38 @@
compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
CQE_STATUS_COMPL_MASK;
- if ((compl->tag0 == OPCODE_COMMON_WRITE_FLASHROM) &&
+ if (((compl->tag0 == OPCODE_COMMON_WRITE_FLASHROM) ||
+ (compl->tag0 == OPCODE_COMMON_WRITE_OBJECT)) &&
(compl->tag1 == CMD_SUBSYSTEM_COMMON)) {
adapter->flash_status = compl_status;
complete(&adapter->flash_compl);
}
if (compl_status == MCC_STATUS_SUCCESS) {
- if (compl->tag0 == OPCODE_ETH_GET_STATISTICS) {
- struct be_cmd_resp_get_stats *resp =
- adapter->stats_cmd.va;
- be_dws_le_to_cpu(&resp->hw_stats,
- sizeof(resp->hw_stats));
+ if (((compl->tag0 == OPCODE_ETH_GET_STATISTICS) ||
+ (compl->tag0 == OPCODE_ETH_GET_PPORT_STATS)) &&
+ (compl->tag1 == CMD_SUBSYSTEM_ETH)) {
+ if (adapter->generation == BE_GEN3) {
+ if (lancer_chip(adapter)) {
+ struct lancer_cmd_resp_pport_stats
+ *resp = adapter->stats_cmd.va;
+ be_dws_le_to_cpu(&resp->pport_stats,
+ sizeof(resp->pport_stats));
+ } else {
+ struct be_cmd_resp_get_stats_v1 *resp =
+ adapter->stats_cmd.va;
+
+ be_dws_le_to_cpu(&resp->hw_stats,
+ sizeof(resp->hw_stats));
+ }
+ } else {
+ struct be_cmd_resp_get_stats_v0 *resp =
+ adapter->stats_cmd.va;
+
+ be_dws_le_to_cpu(&resp->hw_stats,
+ sizeof(resp->hw_stats));
+ }
+ be_parse_stats(adapter);
netdev_stats_update(adapter);
adapter->stats_cmd_sent = false;
}
@@ -132,7 +152,7 @@
struct be_async_event_grp5_pvid_state *evt)
{
if (evt->enabled)
- adapter->pvid = evt->tag;
+ adapter->pvid = le16_to_cpu(evt->tag);
else
adapter->pvid = 0;
}
@@ -292,12 +312,12 @@
if (msecs > 4000) {
dev_err(&adapter->pdev->dev, "mbox poll timed out\n");
- be_detect_dump_ue(adapter);
+ if (!lancer_chip(adapter))
+ be_detect_dump_ue(adapter);
return -1;
}
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(1));
+ msleep(1);
msecs++;
} while (true);
@@ -374,23 +394,25 @@
{
u16 stage;
int status, timeout = 0;
+ struct device *dev = &adapter->pdev->dev;
do {
status = be_POST_stage_get(adapter, &stage);
if (status) {
- dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n",
- stage);
+ dev_err(dev, "POST error; stage=0x%x\n", stage);
return -1;
} else if (stage != POST_STAGE_ARMFW_RDY) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(2 * HZ);
+ if (msleep_interruptible(2000)) {
+ dev_err(dev, "Waiting for POST aborted\n");
+ return -EINTR;
+ }
timeout += 2;
} else {
return 0;
}
} while (timeout < 40);
- dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage);
+ dev_err(dev, "POST timeout; stage=0x%x\n", stage);
return -1;
}
@@ -728,8 +750,6 @@
if (lancer_chip(adapter)) {
req->hdr.version = 2;
req->page_size = 1; /* 1 for 4K */
- AMAP_SET_BITS(struct amap_cq_context_lancer, coalescwm, ctxt,
- coalesce_wm);
AMAP_SET_BITS(struct amap_cq_context_lancer, nodelay, ctxt,
no_delay);
AMAP_SET_BITS(struct amap_cq_context_lancer, count, ctxt,
@@ -1074,7 +1094,7 @@
int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
{
struct be_mcc_wrb *wrb;
- struct be_cmd_req_get_stats *req;
+ struct be_cmd_req_hdr *hdr;
struct be_sge *sge;
int status = 0;
@@ -1088,14 +1108,62 @@
status = -EBUSY;
goto err;
}
+ hdr = nonemb_cmd->va;
+ sge = nonembedded_sgl(wrb);
+
+ be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1,
+ OPCODE_ETH_GET_STATISTICS);
+
+ be_cmd_hdr_prepare(hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_GET_STATISTICS, nonemb_cmd->size);
+
+ if (adapter->generation == BE_GEN3)
+ hdr->version = 1;
+
+ wrb->tag1 = CMD_SUBSYSTEM_ETH;
+ sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+ sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(nonemb_cmd->size);
+
+ be_mcc_notify(adapter);
+ adapter->stats_cmd_sent = true;
+
+err:
+ spin_unlock_bh(&adapter->mcc_lock);
+ return status;
+}
+
+/* Lancer Stats */
+int lancer_cmd_get_pport_stats(struct be_adapter *adapter,
+ struct be_dma_mem *nonemb_cmd)
+{
+
+ struct be_mcc_wrb *wrb;
+ struct lancer_cmd_req_pport_stats *req;
+ struct be_sge *sge;
+ int status = 0;
+
+ spin_lock_bh(&adapter->mcc_lock);
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
req = nonemb_cmd->va;
sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
- OPCODE_ETH_GET_STATISTICS);
+ be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1,
+ OPCODE_ETH_GET_PPORT_STATS);
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
- OPCODE_ETH_GET_STATISTICS, sizeof(*req));
+ OPCODE_ETH_GET_PPORT_STATS, nonemb_cmd->size);
+
+
+ req->cmd_params.params.pport_num = cpu_to_le16(adapter->port_num);
+ req->cmd_params.params.reset_stats = 0;
+
+ wrb->tag1 = CMD_SUBSYSTEM_ETH;
sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
sge->len = cpu_to_le32(nonemb_cmd->size);
@@ -1110,7 +1178,7 @@
/* Uses synchronous mcc */
int be_cmd_link_status_query(struct be_adapter *adapter,
- bool *link_up, u8 *mac_speed, u16 *link_speed)
+ bool *link_up, u8 *mac_speed, u16 *link_speed, u32 dom)
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_link_status *req;
@@ -1186,6 +1254,116 @@
return status;
}
+/* Uses synchronous mcc */
+int be_cmd_get_reg_len(struct be_adapter *adapter, u32 *log_size)
+{
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_get_fat *req;
+ int status;
+
+ spin_lock_bh(&adapter->mcc_lock);
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
+ req = embedded_payload(wrb);
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+ OPCODE_COMMON_MANAGE_FAT);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MANAGE_FAT, sizeof(*req));
+ req->fat_operation = cpu_to_le32(QUERY_FAT);
+ status = be_mcc_notify_wait(adapter);
+ if (!status) {
+ struct be_cmd_resp_get_fat *resp = embedded_payload(wrb);
+ if (log_size && resp->log_size)
+ *log_size = le32_to_cpu(resp->log_size) -
+ sizeof(u32);
+ }
+err:
+ spin_unlock_bh(&adapter->mcc_lock);
+ return status;
+}
+
+void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf)
+{
+ struct be_dma_mem get_fat_cmd;
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_get_fat *req;
+ struct be_sge *sge;
+ u32 offset = 0, total_size, buf_size,
+ log_offset = sizeof(u32), payload_len;
+ int status;
+
+ if (buf_len == 0)
+ return;
+
+ total_size = buf_len;
+
+ get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024;
+ get_fat_cmd.va = pci_alloc_consistent(adapter->pdev,
+ get_fat_cmd.size,
+ &get_fat_cmd.dma);
+ if (!get_fat_cmd.va) {
+ status = -ENOMEM;
+ dev_err(&adapter->pdev->dev,
+ "Memory allocation failure while retrieving FAT data\n");
+ return;
+ }
+
+ spin_lock_bh(&adapter->mcc_lock);
+
+ while (total_size) {
+ buf_size = min(total_size, (u32)60*1024);
+ total_size -= buf_size;
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
+ req = get_fat_cmd.va;
+ sge = nonembedded_sgl(wrb);
+
+ payload_len = sizeof(struct be_cmd_req_get_fat) + buf_size;
+ be_wrb_hdr_prepare(wrb, payload_len, false, 1,
+ OPCODE_COMMON_MANAGE_FAT);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MANAGE_FAT, payload_len);
+
+ sge->pa_hi = cpu_to_le32(upper_32_bits(get_fat_cmd.dma));
+ sge->pa_lo = cpu_to_le32(get_fat_cmd.dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(get_fat_cmd.size);
+
+ req->fat_operation = cpu_to_le32(RETRIEVE_FAT);
+ req->read_log_offset = cpu_to_le32(log_offset);
+ req->read_log_length = cpu_to_le32(buf_size);
+ req->data_buffer_size = cpu_to_le32(buf_size);
+
+ status = be_mcc_notify_wait(adapter);
+ if (!status) {
+ struct be_cmd_resp_get_fat *resp = get_fat_cmd.va;
+ memcpy(buf + offset,
+ resp->data_buffer,
+ resp->read_log_length);
+ } else {
+ dev_err(&adapter->pdev->dev, "FAT Table Retrieve error\n");
+ goto err;
+ }
+ offset += buf_size;
+ log_offset += buf_size;
+ }
+err:
+ pci_free_consistent(adapter->pdev, get_fat_cmd.size,
+ get_fat_cmd.va,
+ get_fat_cmd.dma);
+ spin_unlock_bh(&adapter->mcc_lock);
+}
+
/* Uses Mbox */
int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
{
@@ -1293,12 +1471,24 @@
/* Uses MCC for this command as it may be called in BH context
* Uses synchronous mcc
*/
-int be_cmd_promiscuous_config(struct be_adapter *adapter, u8 port_num, bool en)
+int be_cmd_promiscuous_config(struct be_adapter *adapter, bool en)
{
struct be_mcc_wrb *wrb;
- struct be_cmd_req_promiscuous_config *req;
+ struct be_cmd_req_rx_filter *req;
+ struct be_dma_mem promiscous_cmd;
+ struct be_sge *sge;
int status;
+ memset(&promiscous_cmd, 0, sizeof(struct be_dma_mem));
+ promiscous_cmd.size = sizeof(struct be_cmd_req_rx_filter);
+ promiscous_cmd.va = pci_alloc_consistent(adapter->pdev,
+ promiscous_cmd.size, &promiscous_cmd.dma);
+ if (!promiscous_cmd.va) {
+ dev_err(&adapter->pdev->dev,
+ "Memory allocation failure\n");
+ return -ENOMEM;
+ }
+
spin_lock_bh(&adapter->mcc_lock);
wrb = wrb_from_mccq(adapter);
@@ -1306,26 +1496,30 @@
status = -EBUSY;
goto err;
}
- req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, OPCODE_ETH_PROMISCUOUS);
+ req = promiscous_cmd.va;
+ sge = nonembedded_sgl(wrb);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
- OPCODE_ETH_PROMISCUOUS, sizeof(*req));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+ OPCODE_COMMON_NTWK_RX_FILTER);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_RX_FILTER, sizeof(*req));
- /* In FW versions X.102.149/X.101.487 and later,
- * the port setting associated only with the
- * issuing pci function will take effect
- */
- if (port_num)
- req->port1_promiscuous = en;
- else
- req->port0_promiscuous = en;
+ req->if_id = cpu_to_le32(adapter->if_handle);
+ req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS);
+ if (en)
+ req->if_flags = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS);
+
+ sge->pa_hi = cpu_to_le32(upper_32_bits(promiscous_cmd.dma));
+ sge->pa_lo = cpu_to_le32(promiscous_cmd.dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(promiscous_cmd.size);
status = be_mcc_notify_wait(adapter);
err:
spin_unlock_bh(&adapter->mcc_lock);
+ pci_free_consistent(adapter->pdev, promiscous_cmd.size,
+ promiscous_cmd.va, promiscous_cmd.dma);
return status;
}
@@ -1608,6 +1802,81 @@
return status;
}
+int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
+ u32 data_size, u32 data_offset, const char *obj_name,
+ u32 *data_written, u8 *addn_status)
+{
+ struct be_mcc_wrb *wrb;
+ struct lancer_cmd_req_write_object *req;
+ struct lancer_cmd_resp_write_object *resp;
+ void *ctxt = NULL;
+ int status;
+
+ spin_lock_bh(&adapter->mcc_lock);
+ adapter->flash_status = 0;
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err_unlock;
+ }
+
+ req = embedded_payload(wrb);
+
+ be_wrb_hdr_prepare(wrb, sizeof(struct lancer_cmd_req_write_object),
+ true, 1, OPCODE_COMMON_WRITE_OBJECT);
+ wrb->tag1 = CMD_SUBSYSTEM_COMMON;
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_WRITE_OBJECT,
+ sizeof(struct lancer_cmd_req_write_object));
+
+ ctxt = &req->context;
+ AMAP_SET_BITS(struct amap_lancer_write_obj_context,
+ write_length, ctxt, data_size);
+
+ if (data_size == 0)
+ AMAP_SET_BITS(struct amap_lancer_write_obj_context,
+ eof, ctxt, 1);
+ else
+ AMAP_SET_BITS(struct amap_lancer_write_obj_context,
+ eof, ctxt, 0);
+
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+ req->write_offset = cpu_to_le32(data_offset);
+ strcpy(req->object_name, obj_name);
+ req->descriptor_count = cpu_to_le32(1);
+ req->buf_len = cpu_to_le32(data_size);
+ req->addr_low = cpu_to_le32((cmd->dma +
+ sizeof(struct lancer_cmd_req_write_object))
+ & 0xFFFFFFFF);
+ req->addr_high = cpu_to_le32(upper_32_bits(cmd->dma +
+ sizeof(struct lancer_cmd_req_write_object)));
+
+ be_mcc_notify(adapter);
+ spin_unlock_bh(&adapter->mcc_lock);
+
+ if (!wait_for_completion_timeout(&adapter->flash_compl,
+ msecs_to_jiffies(12000)))
+ status = -1;
+ else
+ status = adapter->flash_status;
+
+ resp = embedded_payload(wrb);
+ if (!status) {
+ *data_written = le32_to_cpu(resp->actual_write_len);
+ } else {
+ *addn_status = resp->additional_status;
+ status = resp->status;
+ }
+
+ return status;
+
+err_unlock:
+ spin_unlock_bh(&adapter->mcc_lock);
+ return status;
+}
+
int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
u32 flash_type, u32 flash_opcode, u32 buf_size)
{
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 4f254cf..8148cc6 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -186,12 +186,14 @@
#define OPCODE_COMMON_NTWK_PMAC_ADD 59
#define OPCODE_COMMON_NTWK_PMAC_DEL 60
#define OPCODE_COMMON_FUNCTION_RESET 61
+#define OPCODE_COMMON_MANAGE_FAT 68
#define OPCODE_COMMON_ENABLE_DISABLE_BEACON 69
#define OPCODE_COMMON_GET_BEACON_STATE 70
#define OPCODE_COMMON_READ_TRANSRECV_DATA 73
#define OPCODE_COMMON_GET_PHY_DETAILS 102
#define OPCODE_COMMON_SET_DRIVER_FUNCTION_CAP 103
#define OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES 121
+#define OPCODE_COMMON_WRITE_OBJECT 172
#define OPCODE_ETH_RSS_CONFIG 1
#define OPCODE_ETH_ACPI_CONFIG 2
@@ -202,6 +204,7 @@
#define OPCODE_ETH_TX_DESTROY 9
#define OPCODE_ETH_RX_DESTROY 10
#define OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG 12
+#define OPCODE_ETH_GET_PPORT_STATS 18
#define OPCODE_LOWLEVEL_HOST_DDR_DMA 17
#define OPCODE_LOWLEVEL_LOOPBACK_TEST 18
@@ -380,6 +383,24 @@
u16 rsvd0;
} __packed;
+struct be_cmd_req_get_fat {
+ struct be_cmd_req_hdr hdr;
+ u32 fat_operation;
+ u32 read_log_offset;
+ u32 read_log_length;
+ u32 data_buffer_size;
+ u32 data_buffer[1];
+} __packed;
+
+struct be_cmd_resp_get_fat {
+ struct be_cmd_resp_hdr hdr;
+ u32 log_size;
+ u32 read_log_length;
+ u32 rsvd[2];
+ u32 data_buffer[1];
+} __packed;
+
+
/******************** Create MCCQ ***************************/
/* Pseudo amap definition in which each bit of the actual structure is defined
* as a byte: used to calculate offset/shift/mask of each field */
@@ -549,7 +570,7 @@
};
/*************** HW Stats Get **********************************/
-struct be_port_rxf_stats {
+struct be_port_rxf_stats_v0 {
u32 rx_bytes_lsd; /* dword 0*/
u32 rx_bytes_msd; /* dword 1*/
u32 rx_total_frames; /* dword 2*/
@@ -618,8 +639,8 @@
u32 rx_input_fifo_overflow; /* dword 65*/
};
-struct be_rxf_stats {
- struct be_port_rxf_stats port[2];
+struct be_rxf_stats_v0 {
+ struct be_port_rxf_stats_v0 port[2];
u32 rx_drops_no_pbuf; /* dword 132*/
u32 rx_drops_no_txpb; /* dword 133*/
u32 rx_drops_no_erx_descr; /* dword 134*/
@@ -642,36 +663,227 @@
u32 rsvd1[6];
};
-struct be_erx_stats {
+struct be_erx_stats_v0 {
u32 rx_drops_no_fragments[44]; /* dwordS 0 to 43*/
- u32 debug_wdma_sent_hold; /* dword 44*/
- u32 debug_wdma_pbfree_sent_hold; /* dword 45*/
- u32 debug_wdma_zerobyte_pbfree_sent_hold; /* dword 46*/
- u32 debug_pmem_pbuf_dealloc; /* dword 47*/
+ u32 rsvd[4];
};
struct be_pmem_stats {
u32 eth_red_drops;
- u32 rsvd[4];
+ u32 rsvd[5];
};
-struct be_hw_stats {
- struct be_rxf_stats rxf;
+struct be_hw_stats_v0 {
+ struct be_rxf_stats_v0 rxf;
u32 rsvd[48];
- struct be_erx_stats erx;
+ struct be_erx_stats_v0 erx;
struct be_pmem_stats pmem;
};
-struct be_cmd_req_get_stats {
+struct be_cmd_req_get_stats_v0 {
struct be_cmd_req_hdr hdr;
- u8 rsvd[sizeof(struct be_hw_stats)];
+ u8 rsvd[sizeof(struct be_hw_stats_v0)];
};
-struct be_cmd_resp_get_stats {
+struct be_cmd_resp_get_stats_v0 {
struct be_cmd_resp_hdr hdr;
- struct be_hw_stats hw_stats;
+ struct be_hw_stats_v0 hw_stats;
};
+#define make_64bit_val(hi_32, lo_32) (((u64)hi_32<<32) | lo_32)
+struct lancer_cmd_pport_stats {
+ u32 tx_packets_lo;
+ u32 tx_packets_hi;
+ u32 tx_unicast_packets_lo;
+ u32 tx_unicast_packets_hi;
+ u32 tx_multicast_packets_lo;
+ u32 tx_multicast_packets_hi;
+ u32 tx_broadcast_packets_lo;
+ u32 tx_broadcast_packets_hi;
+ u32 tx_bytes_lo;
+ u32 tx_bytes_hi;
+ u32 tx_unicast_bytes_lo;
+ u32 tx_unicast_bytes_hi;
+ u32 tx_multicast_bytes_lo;
+ u32 tx_multicast_bytes_hi;
+ u32 tx_broadcast_bytes_lo;
+ u32 tx_broadcast_bytes_hi;
+ u32 tx_discards_lo;
+ u32 tx_discards_hi;
+ u32 tx_errors_lo;
+ u32 tx_errors_hi;
+ u32 tx_pause_frames_lo;
+ u32 tx_pause_frames_hi;
+ u32 tx_pause_on_frames_lo;
+ u32 tx_pause_on_frames_hi;
+ u32 tx_pause_off_frames_lo;
+ u32 tx_pause_off_frames_hi;
+ u32 tx_internal_mac_errors_lo;
+ u32 tx_internal_mac_errors_hi;
+ u32 tx_control_frames_lo;
+ u32 tx_control_frames_hi;
+ u32 tx_packets_64_bytes_lo;
+ u32 tx_packets_64_bytes_hi;
+ u32 tx_packets_65_to_127_bytes_lo;
+ u32 tx_packets_65_to_127_bytes_hi;
+ u32 tx_packets_128_to_255_bytes_lo;
+ u32 tx_packets_128_to_255_bytes_hi;
+ u32 tx_packets_256_to_511_bytes_lo;
+ u32 tx_packets_256_to_511_bytes_hi;
+ u32 tx_packets_512_to_1023_bytes_lo;
+ u32 tx_packets_512_to_1023_bytes_hi;
+ u32 tx_packets_1024_to_1518_bytes_lo;
+ u32 tx_packets_1024_to_1518_bytes_hi;
+ u32 tx_packets_1519_to_2047_bytes_lo;
+ u32 tx_packets_1519_to_2047_bytes_hi;
+ u32 tx_packets_2048_to_4095_bytes_lo;
+ u32 tx_packets_2048_to_4095_bytes_hi;
+ u32 tx_packets_4096_to_8191_bytes_lo;
+ u32 tx_packets_4096_to_8191_bytes_hi;
+ u32 tx_packets_8192_to_9216_bytes_lo;
+ u32 tx_packets_8192_to_9216_bytes_hi;
+ u32 tx_lso_packets_lo;
+ u32 tx_lso_packets_hi;
+ u32 rx_packets_lo;
+ u32 rx_packets_hi;
+ u32 rx_unicast_packets_lo;
+ u32 rx_unicast_packets_hi;
+ u32 rx_multicast_packets_lo;
+ u32 rx_multicast_packets_hi;
+ u32 rx_broadcast_packets_lo;
+ u32 rx_broadcast_packets_hi;
+ u32 rx_bytes_lo;
+ u32 rx_bytes_hi;
+ u32 rx_unicast_bytes_lo;
+ u32 rx_unicast_bytes_hi;
+ u32 rx_multicast_bytes_lo;
+ u32 rx_multicast_bytes_hi;
+ u32 rx_broadcast_bytes_lo;
+ u32 rx_broadcast_bytes_hi;
+ u32 rx_unknown_protos;
+ u32 rsvd_69; /* Word 69 is reserved */
+ u32 rx_discards_lo;
+ u32 rx_discards_hi;
+ u32 rx_errors_lo;
+ u32 rx_errors_hi;
+ u32 rx_crc_errors_lo;
+ u32 rx_crc_errors_hi;
+ u32 rx_alignment_errors_lo;
+ u32 rx_alignment_errors_hi;
+ u32 rx_symbol_errors_lo;
+ u32 rx_symbol_errors_hi;
+ u32 rx_pause_frames_lo;
+ u32 rx_pause_frames_hi;
+ u32 rx_pause_on_frames_lo;
+ u32 rx_pause_on_frames_hi;
+ u32 rx_pause_off_frames_lo;
+ u32 rx_pause_off_frames_hi;
+ u32 rx_frames_too_long_lo;
+ u32 rx_frames_too_long_hi;
+ u32 rx_internal_mac_errors_lo;
+ u32 rx_internal_mac_errors_hi;
+ u32 rx_undersize_packets;
+ u32 rx_oversize_packets;
+ u32 rx_fragment_packets;
+ u32 rx_jabbers;
+ u32 rx_control_frames_lo;
+ u32 rx_control_frames_hi;
+ u32 rx_control_frames_unknown_opcode_lo;
+ u32 rx_control_frames_unknown_opcode_hi;
+ u32 rx_in_range_errors;
+ u32 rx_out_of_range_errors;
+ u32 rx_address_match_errors;
+ u32 rx_vlan_mismatch_errors;
+ u32 rx_dropped_too_small;
+ u32 rx_dropped_too_short;
+ u32 rx_dropped_header_too_small;
+ u32 rx_dropped_invalid_tcp_length;
+ u32 rx_dropped_runt;
+ u32 rx_ip_checksum_errors;
+ u32 rx_tcp_checksum_errors;
+ u32 rx_udp_checksum_errors;
+ u32 rx_non_rss_packets;
+ u32 rsvd_111;
+ u32 rx_ipv4_packets_lo;
+ u32 rx_ipv4_packets_hi;
+ u32 rx_ipv6_packets_lo;
+ u32 rx_ipv6_packets_hi;
+ u32 rx_ipv4_bytes_lo;
+ u32 rx_ipv4_bytes_hi;
+ u32 rx_ipv6_bytes_lo;
+ u32 rx_ipv6_bytes_hi;
+ u32 rx_nic_packets_lo;
+ u32 rx_nic_packets_hi;
+ u32 rx_tcp_packets_lo;
+ u32 rx_tcp_packets_hi;
+ u32 rx_iscsi_packets_lo;
+ u32 rx_iscsi_packets_hi;
+ u32 rx_management_packets_lo;
+ u32 rx_management_packets_hi;
+ u32 rx_switched_unicast_packets_lo;
+ u32 rx_switched_unicast_packets_hi;
+ u32 rx_switched_multicast_packets_lo;
+ u32 rx_switched_multicast_packets_hi;
+ u32 rx_switched_broadcast_packets_lo;
+ u32 rx_switched_broadcast_packets_hi;
+ u32 num_forwards_lo;
+ u32 num_forwards_hi;
+ u32 rx_fifo_overflow;
+ u32 rx_input_fifo_overflow;
+ u32 rx_drops_too_many_frags_lo;
+ u32 rx_drops_too_many_frags_hi;
+ u32 rx_drops_invalid_queue;
+ u32 rsvd_141;
+ u32 rx_drops_mtu_lo;
+ u32 rx_drops_mtu_hi;
+ u32 rx_packets_64_bytes_lo;
+ u32 rx_packets_64_bytes_hi;
+ u32 rx_packets_65_to_127_bytes_lo;
+ u32 rx_packets_65_to_127_bytes_hi;
+ u32 rx_packets_128_to_255_bytes_lo;
+ u32 rx_packets_128_to_255_bytes_hi;
+ u32 rx_packets_256_to_511_bytes_lo;
+ u32 rx_packets_256_to_511_bytes_hi;
+ u32 rx_packets_512_to_1023_bytes_lo;
+ u32 rx_packets_512_to_1023_bytes_hi;
+ u32 rx_packets_1024_to_1518_bytes_lo;
+ u32 rx_packets_1024_to_1518_bytes_hi;
+ u32 rx_packets_1519_to_2047_bytes_lo;
+ u32 rx_packets_1519_to_2047_bytes_hi;
+ u32 rx_packets_2048_to_4095_bytes_lo;
+ u32 rx_packets_2048_to_4095_bytes_hi;
+ u32 rx_packets_4096_to_8191_bytes_lo;
+ u32 rx_packets_4096_to_8191_bytes_hi;
+ u32 rx_packets_8192_to_9216_bytes_lo;
+ u32 rx_packets_8192_to_9216_bytes_hi;
+};
+
+struct pport_stats_params {
+ u16 pport_num;
+ u8 rsvd;
+ u8 reset_stats;
+};
+
+struct lancer_cmd_req_pport_stats {
+ struct be_cmd_req_hdr hdr;
+ union {
+ struct pport_stats_params params;
+ u8 rsvd[sizeof(struct lancer_cmd_pport_stats)];
+ } cmd_params;
+};
+
+struct lancer_cmd_resp_pport_stats {
+ struct be_cmd_resp_hdr hdr;
+ struct lancer_cmd_pport_stats pport_stats;
+};
+
+static inline struct lancer_cmd_pport_stats*
+ pport_stats_from_cmd(struct be_adapter *adapter)
+{
+ struct lancer_cmd_resp_pport_stats *cmd = adapter->stats_cmd.va;
+ return &cmd->pport_stats;
+}
+
struct be_cmd_req_get_cntl_addnl_attribs {
struct be_cmd_req_hdr hdr;
u8 rsvd[8];
@@ -695,13 +907,6 @@
u16 normal_vlan[64];
} __packed;
-struct be_cmd_req_promiscuous_config {
- struct be_cmd_req_hdr hdr;
- u8 port0_promiscuous;
- u8 port1_promiscuous;
- u16 rsvd0;
-} __packed;
-
/******************** Multicast MAC Config *******************/
#define BE_MAX_MC 64 /* set mcast promisc if > 64 */
struct macaddr {
@@ -716,11 +921,18 @@
struct macaddr mac[BE_MAX_MC];
} __packed;
-static inline struct be_hw_stats *
-hw_stats_from_cmd(struct be_cmd_resp_get_stats *cmd)
-{
- return &cmd->hw_stats;
-}
+/******************* RX FILTER ******************************/
+struct be_cmd_req_rx_filter {
+ struct be_cmd_req_hdr hdr;
+ u32 global_flags_mask;
+ u32 global_flags;
+ u32 if_flags_mask;
+ u32 if_flags;
+ u32 if_id;
+ u32 multicast_num;
+ struct macaddr mac[BE_MAX_MC];
+};
+
/******************** Link Status Query *******************/
struct be_cmd_req_link_status {
@@ -920,6 +1132,36 @@
struct flashrom_params params;
};
+/**************** Lancer Firmware Flash ************/
+struct amap_lancer_write_obj_context {
+ u8 write_length[24];
+ u8 reserved1[7];
+ u8 eof;
+} __packed;
+
+struct lancer_cmd_req_write_object {
+ struct be_cmd_req_hdr hdr;
+ u8 context[sizeof(struct amap_lancer_write_obj_context) / 8];
+ u32 write_offset;
+ u8 object_name[104];
+ u32 descriptor_count;
+ u32 buf_len;
+ u32 addr_low;
+ u32 addr_high;
+};
+
+struct lancer_cmd_resp_write_object {
+ u8 opcode;
+ u8 subsystem;
+ u8 rsvd1[2];
+ u8 status;
+ u8 additional_status;
+ u8 rsvd2[2];
+ u32 resp_len;
+ u32 actual_resp_len;
+ u32 actual_write_len;
+};
+
/************************ WOL *******************************/
struct be_cmd_req_acpi_wol_magic_config{
struct be_cmd_req_hdr hdr;
@@ -1061,6 +1303,151 @@
u8 rsvd[212];
};
+/*************** HW Stats Get v1 **********************************/
+#define BE_TXP_SW_SZ 48
+struct be_port_rxf_stats_v1 {
+ u32 rsvd0[12];
+ u32 rx_crc_errors;
+ u32 rx_alignment_symbol_errors;
+ u32 rx_pause_frames;
+ u32 rx_priority_pause_frames;
+ u32 rx_control_frames;
+ u32 rx_in_range_errors;
+ u32 rx_out_range_errors;
+ u32 rx_frame_too_long;
+ u32 rx_address_match_errors;
+ u32 rx_dropped_too_small;
+ u32 rx_dropped_too_short;
+ u32 rx_dropped_header_too_small;
+ u32 rx_dropped_tcp_length;
+ u32 rx_dropped_runt;
+ u32 rsvd1[10];
+ u32 rx_ip_checksum_errs;
+ u32 rx_tcp_checksum_errs;
+ u32 rx_udp_checksum_errs;
+ u32 rsvd2[7];
+ u32 rx_switched_unicast_packets;
+ u32 rx_switched_multicast_packets;
+ u32 rx_switched_broadcast_packets;
+ u32 rsvd3[3];
+ u32 tx_pauseframes;
+ u32 tx_priority_pauseframes;
+ u32 tx_controlframes;
+ u32 rsvd4[10];
+ u32 rxpp_fifo_overflow_drop;
+ u32 rx_input_fifo_overflow_drop;
+ u32 pmem_fifo_overflow_drop;
+ u32 jabber_events;
+ u32 rsvd5[3];
+};
+
+
+struct be_rxf_stats_v1 {
+ struct be_port_rxf_stats_v1 port[4];
+ u32 rsvd0[2];
+ u32 rx_drops_no_pbuf;
+ u32 rx_drops_no_txpb;
+ u32 rx_drops_no_erx_descr;
+ u32 rx_drops_no_tpre_descr;
+ u32 rsvd1[6];
+ u32 rx_drops_too_many_frags;
+ u32 rx_drops_invalid_ring;
+ u32 forwarded_packets;
+ u32 rx_drops_mtu;
+ u32 rsvd2[14];
+};
+
+struct be_erx_stats_v1 {
+ u32 rx_drops_no_fragments[68]; /* dwordS 0 to 67*/
+ u32 rsvd[4];
+};
+
+struct be_hw_stats_v1 {
+ struct be_rxf_stats_v1 rxf;
+ u32 rsvd0[BE_TXP_SW_SZ];
+ struct be_erx_stats_v1 erx;
+ struct be_pmem_stats pmem;
+ u32 rsvd1[3];
+};
+
+struct be_cmd_req_get_stats_v1 {
+ struct be_cmd_req_hdr hdr;
+ u8 rsvd[sizeof(struct be_hw_stats_v1)];
+};
+
+struct be_cmd_resp_get_stats_v1 {
+ struct be_cmd_resp_hdr hdr;
+ struct be_hw_stats_v1 hw_stats;
+};
+
+static inline void *
+hw_stats_from_cmd(struct be_adapter *adapter)
+{
+ if (adapter->generation == BE_GEN3) {
+ struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va;
+
+ return &cmd->hw_stats;
+ } else {
+ struct be_cmd_resp_get_stats_v0 *cmd = adapter->stats_cmd.va;
+
+ return &cmd->hw_stats;
+ }
+}
+
+static inline void *be_port_rxf_stats_from_cmd(struct be_adapter *adapter)
+{
+ if (adapter->generation == BE_GEN3) {
+ struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+ struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf;
+
+ return &rxf_stats->port[adapter->port_num];
+ } else {
+ struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+ struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf;
+
+ return &rxf_stats->port[adapter->port_num];
+ }
+}
+
+static inline void *be_rxf_stats_from_cmd(struct be_adapter *adapter)
+{
+ if (adapter->generation == BE_GEN3) {
+ struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+
+ return &hw_stats->rxf;
+ } else {
+ struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+
+ return &hw_stats->rxf;
+ }
+}
+
+static inline void *be_erx_stats_from_cmd(struct be_adapter *adapter)
+{
+ if (adapter->generation == BE_GEN3) {
+ struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+
+ return &hw_stats->erx;
+ } else {
+ struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+
+ return &hw_stats->erx;
+ }
+}
+
+static inline void *be_pmem_stats_from_cmd(struct be_adapter *adapter)
+{
+ if (adapter->generation == BE_GEN3) {
+ struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+
+ return &hw_stats->pmem;
+ } else {
+ struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+
+ return &hw_stats->pmem;
+ }
+}
+
extern int be_pci_fnum_get(struct be_adapter *adapter);
extern int be_cmd_POST(struct be_adapter *adapter);
extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -1093,18 +1480,19 @@
extern int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
int type);
extern int be_cmd_link_status_query(struct be_adapter *adapter,
- bool *link_up, u8 *mac_speed, u16 *link_speed);
+ bool *link_up, u8 *mac_speed, u16 *link_speed, u32 dom);
extern int be_cmd_reset(struct be_adapter *adapter);
extern int be_cmd_get_stats(struct be_adapter *adapter,
struct be_dma_mem *nonemb_cmd);
+extern int lancer_cmd_get_pport_stats(struct be_adapter *adapter,
+ struct be_dma_mem *nonemb_cmd);
extern int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver);
extern int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd);
extern int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id,
u16 *vtag_array, u32 num, bool untagged,
bool promiscuous);
-extern int be_cmd_promiscuous_config(struct be_adapter *adapter,
- u8 port_num, bool en);
+extern int be_cmd_promiscuous_config(struct be_adapter *adapter, bool en);
extern int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
struct net_device *netdev, struct be_dma_mem *mem);
extern int be_cmd_set_flow_control(struct be_adapter *adapter,
@@ -1124,6 +1512,11 @@
extern int be_cmd_write_flashrom(struct be_adapter *adapter,
struct be_dma_mem *cmd, u32 flash_oper,
u32 flash_opcode, u32 buf_size);
+extern int lancer_cmd_write_object(struct be_adapter *adapter,
+ struct be_dma_mem *cmd,
+ u32 data_size, u32 data_offset,
+ const char *obj_name,
+ u32 *data_written, u8 *addn_status);
int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
int offset);
extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
@@ -1148,4 +1541,6 @@
extern int be_cmd_get_die_temperature(struct be_adapter *adapter);
extern int be_cmd_get_cntl_attributes(struct be_adapter *adapter);
extern int be_cmd_check_native_mode(struct be_adapter *adapter);
+extern int be_cmd_get_reg_len(struct be_adapter *adapter, u32 *log_size);
+extern void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index aac248f..facfe3c 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -26,8 +26,8 @@
int offset;
};
-enum {NETSTAT, PORTSTAT, MISCSTAT, DRVSTAT_TX, DRVSTAT_RX, ERXSTAT,
- PMEMSTAT, DRVSTAT};
+enum {NETSTAT, DRVSTAT_TX, DRVSTAT_RX, ERXSTAT,
+ DRVSTAT};
#define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
offsetof(_struct, field)
#define NETSTAT_INFO(field) #field, NETSTAT,\
@@ -37,15 +37,8 @@
FIELDINFO(struct be_tx_stats, field)
#define DRVSTAT_RX_INFO(field) #field, DRVSTAT_RX,\
FIELDINFO(struct be_rx_stats, field)
-#define MISCSTAT_INFO(field) #field, MISCSTAT,\
- FIELDINFO(struct be_rxf_stats, field)
-#define PORTSTAT_INFO(field) #field, PORTSTAT,\
- FIELDINFO(struct be_port_rxf_stats, \
- field)
-#define ERXSTAT_INFO(field) #field, ERXSTAT,\
- FIELDINFO(struct be_erx_stats, field)
-#define PMEMSTAT_INFO(field) #field, PMEMSTAT,\
- FIELDINFO(struct be_pmem_stats, field)
+#define ERXSTAT_INFO(field) #field, ERXSTAT,\
+ FIELDINFO(struct be_erx_stats_v1, field)
#define DRVSTAT_INFO(field) #field, DRVSTAT,\
FIELDINFO(struct be_drv_stats, \
field)
@@ -65,50 +58,41 @@
{DRVSTAT_TX_INFO(be_tx_stops)},
{DRVSTAT_TX_INFO(be_tx_events)},
{DRVSTAT_TX_INFO(be_tx_compl)},
- {PORTSTAT_INFO(rx_unicast_frames)},
- {PORTSTAT_INFO(rx_multicast_frames)},
- {PORTSTAT_INFO(rx_broadcast_frames)},
- {PORTSTAT_INFO(rx_crc_errors)},
- {PORTSTAT_INFO(rx_alignment_symbol_errors)},
- {PORTSTAT_INFO(rx_pause_frames)},
- {PORTSTAT_INFO(rx_control_frames)},
- {PORTSTAT_INFO(rx_in_range_errors)},
- {PORTSTAT_INFO(rx_out_range_errors)},
- {PORTSTAT_INFO(rx_frame_too_long)},
- {PORTSTAT_INFO(rx_address_match_errors)},
- {PORTSTAT_INFO(rx_vlan_mismatch)},
- {PORTSTAT_INFO(rx_dropped_too_small)},
- {PORTSTAT_INFO(rx_dropped_too_short)},
- {PORTSTAT_INFO(rx_dropped_header_too_small)},
- {PORTSTAT_INFO(rx_dropped_tcp_length)},
- {PORTSTAT_INFO(rx_dropped_runt)},
- {PORTSTAT_INFO(rx_fifo_overflow)},
- {PORTSTAT_INFO(rx_input_fifo_overflow)},
- {PORTSTAT_INFO(rx_ip_checksum_errs)},
- {PORTSTAT_INFO(rx_tcp_checksum_errs)},
- {PORTSTAT_INFO(rx_udp_checksum_errs)},
- {PORTSTAT_INFO(rx_non_rss_packets)},
- {PORTSTAT_INFO(rx_ipv4_packets)},
- {PORTSTAT_INFO(rx_ipv6_packets)},
- {PORTSTAT_INFO(rx_switched_unicast_packets)},
- {PORTSTAT_INFO(rx_switched_multicast_packets)},
- {PORTSTAT_INFO(rx_switched_broadcast_packets)},
- {PORTSTAT_INFO(tx_unicastframes)},
- {PORTSTAT_INFO(tx_multicastframes)},
- {PORTSTAT_INFO(tx_broadcastframes)},
- {PORTSTAT_INFO(tx_pauseframes)},
- {PORTSTAT_INFO(tx_controlframes)},
- {MISCSTAT_INFO(rx_drops_no_pbuf)},
- {MISCSTAT_INFO(rx_drops_no_txpb)},
- {MISCSTAT_INFO(rx_drops_no_erx_descr)},
- {MISCSTAT_INFO(rx_drops_no_tpre_descr)},
- {MISCSTAT_INFO(rx_drops_too_many_frags)},
- {MISCSTAT_INFO(rx_drops_invalid_ring)},
- {MISCSTAT_INFO(forwarded_packets)},
- {MISCSTAT_INFO(rx_drops_mtu)},
- {MISCSTAT_INFO(port0_jabber_events)},
- {MISCSTAT_INFO(port1_jabber_events)},
- {PMEMSTAT_INFO(eth_red_drops)},
+ {DRVSTAT_INFO(rx_crc_errors)},
+ {DRVSTAT_INFO(rx_alignment_symbol_errors)},
+ {DRVSTAT_INFO(rx_pause_frames)},
+ {DRVSTAT_INFO(rx_control_frames)},
+ {DRVSTAT_INFO(rx_in_range_errors)},
+ {DRVSTAT_INFO(rx_out_range_errors)},
+ {DRVSTAT_INFO(rx_frame_too_long)},
+ {DRVSTAT_INFO(rx_address_match_errors)},
+ {DRVSTAT_INFO(rx_dropped_too_small)},
+ {DRVSTAT_INFO(rx_dropped_too_short)},
+ {DRVSTAT_INFO(rx_dropped_header_too_small)},
+ {DRVSTAT_INFO(rx_dropped_tcp_length)},
+ {DRVSTAT_INFO(rx_dropped_runt)},
+ {DRVSTAT_INFO(rxpp_fifo_overflow_drop)},
+ {DRVSTAT_INFO(rx_input_fifo_overflow_drop)},
+ {DRVSTAT_INFO(rx_ip_checksum_errs)},
+ {DRVSTAT_INFO(rx_tcp_checksum_errs)},
+ {DRVSTAT_INFO(rx_udp_checksum_errs)},
+ {DRVSTAT_INFO(rx_switched_unicast_packets)},
+ {DRVSTAT_INFO(rx_switched_multicast_packets)},
+ {DRVSTAT_INFO(rx_switched_broadcast_packets)},
+ {DRVSTAT_INFO(tx_pauseframes)},
+ {DRVSTAT_INFO(tx_controlframes)},
+ {DRVSTAT_INFO(rx_priority_pause_frames)},
+ {DRVSTAT_INFO(pmem_fifo_overflow_drop)},
+ {DRVSTAT_INFO(jabber_events)},
+ {DRVSTAT_INFO(rx_drops_no_pbuf)},
+ {DRVSTAT_INFO(rx_drops_no_txpb)},
+ {DRVSTAT_INFO(rx_drops_no_erx_descr)},
+ {DRVSTAT_INFO(rx_drops_no_tpre_descr)},
+ {DRVSTAT_INFO(rx_drops_too_many_frags)},
+ {DRVSTAT_INFO(rx_drops_invalid_ring)},
+ {DRVSTAT_INFO(forwarded_packets)},
+ {DRVSTAT_INFO(rx_drops_mtu)},
+ {DRVSTAT_INFO(eth_red_drops)},
{DRVSTAT_INFO(be_on_die_temperature)}
};
#define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
@@ -156,6 +140,29 @@
}
static int
+be_get_reg_len(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ u32 log_size = 0;
+
+ if (be_physfn(adapter))
+ be_cmd_get_reg_len(adapter, &log_size);
+
+ return log_size;
+}
+
+static void
+be_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *buf)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ if (be_physfn(adapter)) {
+ memset(buf, 0, regs->len);
+ be_cmd_get_regs(adapter, regs->len, buf);
+ }
+}
+
+static int
be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
{
struct be_adapter *adapter = netdev_priv(netdev);
@@ -186,9 +193,9 @@
struct be_rx_obj *rxo;
struct be_eq_obj *rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
- u32 tx_max, tx_min, tx_cur;
u32 rx_max, rx_min, rx_cur;
int status = 0, i;
+ u32 tx_cur;
if (coalesce->use_adaptive_tx_coalesce == 1)
return -EINVAL;
@@ -227,8 +234,6 @@
}
}
- tx_max = coalesce->tx_coalesce_usecs_high;
- tx_min = coalesce->tx_coalesce_usecs_low;
tx_cur = coalesce->tx_coalesce_usecs;
if (tx_cur > BE_MAX_EQD)
@@ -242,32 +247,11 @@
return 0;
}
-static u32 be_get_rx_csum(struct net_device *netdev)
-{
- struct be_adapter *adapter = netdev_priv(netdev);
-
- return adapter->rx_csum;
-}
-
-static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
- struct be_adapter *adapter = netdev_priv(netdev);
-
- if (data)
- adapter->rx_csum = true;
- else
- adapter->rx_csum = false;
-
- return 0;
-}
-
static void
be_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats, uint64_t *data)
{
struct be_adapter *adapter = netdev_priv(netdev);
- struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats_cmd.va);
- struct be_erx_stats *erx_stats = &hw_stats->erx;
struct be_rx_obj *rxo;
void *p = NULL;
int i, j;
@@ -280,15 +264,6 @@
case DRVSTAT_TX:
p = &adapter->tx_stats;
break;
- case PORTSTAT:
- p = &hw_stats->rxf.port[adapter->port_num];
- break;
- case MISCSTAT:
- p = &hw_stats->rxf;
- break;
- case PMEMSTAT:
- p = &hw_stats->pmem;
- break;
case DRVSTAT:
p = &adapter->drv_stats;
break;
@@ -306,7 +281,8 @@
p = (u8 *)&rxo->stats + et_rx_stats[i].offset;
break;
case ERXSTAT:
- p = (u32 *)erx_stats + rxo->q.id;
+ p = (u32 *)be_erx_stats_from_cmd(adapter) +
+ rxo->q.id;
break;
}
data[ETHTOOL_STATS_NUM + j * ETHTOOL_RXSTATS_NUM + i] =
@@ -374,19 +350,28 @@
if ((adapter->link_speed < 0) || (!(netdev->flags & IFF_UP))) {
status = be_cmd_link_status_query(adapter, &link_up,
- &mac_speed, &link_speed);
+ &mac_speed, &link_speed, 0);
be_link_status_update(adapter, link_up);
/* link_speed is in units of 10 Mbps */
if (link_speed) {
- ecmd->speed = link_speed*10;
+ ethtool_cmd_speed_set(ecmd, link_speed*10);
} else {
switch (mac_speed) {
+ case PHY_LINK_SPEED_10MBPS:
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
+ break;
+ case PHY_LINK_SPEED_100MBPS:
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ break;
case PHY_LINK_SPEED_1GBPS:
- ecmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
break;
case PHY_LINK_SPEED_10GBPS:
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ break;
+ case PHY_LINK_SPEED_ZERO:
+ ethtool_cmd_speed_set(ecmd, 0);
break;
}
}
@@ -429,14 +414,14 @@
}
/* Save for future use */
- adapter->link_speed = ecmd->speed;
+ adapter->link_speed = ethtool_cmd_speed(ecmd);
adapter->port_type = ecmd->port;
adapter->transceiver = ecmd->transceiver;
adapter->autoneg = ecmd->autoneg;
dma_free_coherent(&adapter->pdev->dev, phy_cmd.size, phy_cmd.va,
phy_cmd.dma);
} else {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
ecmd->port = adapter->port_type;
ecmd->transceiver = adapter->transceiver;
ecmd->autoneg = adapter->autoneg;
@@ -507,29 +492,33 @@
}
static int
-be_phys_id(struct net_device *netdev, u32 data)
+be_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct be_adapter *adapter = netdev_priv(netdev);
- int status;
- u32 cur;
- be_cmd_get_beacon_state(adapter, adapter->hba_port_num, &cur);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ be_cmd_get_beacon_state(adapter, adapter->hba_port_num,
+ &adapter->beacon_state);
+ return 1; /* cycle on/off once per second */
- if (cur == BEACON_STATE_ENABLED)
- return 0;
+ case ETHTOOL_ID_ON:
+ be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
+ BEACON_STATE_ENABLED);
+ break;
- if (data < 2)
- data = 2;
+ case ETHTOOL_ID_OFF:
+ be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
+ BEACON_STATE_DISABLED);
+ break;
- status = be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
- BEACON_STATE_ENABLED);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(data*HZ);
+ case ETHTOOL_ID_INACTIVE:
+ be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
+ adapter->beacon_state);
+ }
- status = be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
- BEACON_STATE_DISABLED);
-
- return status;
+ return 0;
}
static bool
@@ -646,7 +635,7 @@
}
if (be_cmd_link_status_query(adapter, &link_up, &mac_speed,
- &qos_link_speed) != 0) {
+ &qos_link_speed, 0) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
data[4] = -1;
} else if (!mac_speed) {
@@ -660,11 +649,9 @@
{
struct be_adapter *adapter = netdev_priv(netdev);
char file_name[ETHTOOL_FLASH_MAX_FILENAME];
- u32 region;
file_name[ETHTOOL_FLASH_MAX_FILENAME - 1] = 0;
strcpy(file_name, efl->data);
- region = efl->region;
return be_load_fw(adapter, file_name);
}
@@ -725,18 +712,12 @@
.get_ringparam = be_get_ringparam,
.get_pauseparam = be_get_pauseparam,
.set_pauseparam = be_set_pauseparam,
- .get_rx_csum = be_get_rx_csum,
- .set_rx_csum = be_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ethtool_op_set_tso,
.get_strings = be_get_stat_strings,
- .phys_id = be_phys_id,
+ .set_phys_id = be_set_phys_id,
.get_sset_count = be_get_sset_count,
.get_ethtool_stats = be_get_ethtool_stats,
+ .get_regs_len = be_get_reg_len,
+ .get_regs = be_get_regs,
.flash_device = be_do_flash,
.self_test = be_self_test,
};
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index d4344a0..53d658a 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -155,6 +155,10 @@
/********** SRIOV VF PCICFG OFFSET ********/
#define SRIOV_VF_PCICFG_OFFSET (4096)
+/********** FAT TABLE ********/
+#define RETRIEVE_FAT 0
+#define QUERY_FAT 1
+
/* Flashrom related descriptors */
#define IMAGE_TYPE_FIRMWARE 160
#define IMAGE_TYPE_BOOTCODE 224
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 7cb5a11..4b5e0ed 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -42,6 +42,7 @@
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)},
+ { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID4)},
{ 0 }
};
MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -116,11 +117,6 @@
"Unknown"
};
-static inline bool be_multi_rxq(struct be_adapter *adapter)
-{
- return (adapter->num_rx_qs > 1);
-}
-
static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q)
{
struct be_dma_mem *mem = &q->dma_mem;
@@ -250,14 +246,185 @@
return status;
}
+static void populate_be2_stats(struct be_adapter *adapter)
+{
+
+ struct be_drv_stats *drvs = &adapter->drv_stats;
+ struct be_pmem_stats *pmem_sts = be_pmem_stats_from_cmd(adapter);
+ struct be_port_rxf_stats_v0 *port_stats =
+ be_port_rxf_stats_from_cmd(adapter);
+ struct be_rxf_stats_v0 *rxf_stats =
+ be_rxf_stats_from_cmd(adapter);
+
+ drvs->rx_pause_frames = port_stats->rx_pause_frames;
+ drvs->rx_crc_errors = port_stats->rx_crc_errors;
+ drvs->rx_control_frames = port_stats->rx_control_frames;
+ drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
+ drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
+ drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
+ drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
+ drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
+ drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
+ drvs->rxpp_fifo_overflow_drop = port_stats->rx_fifo_overflow;
+ drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
+ drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
+ drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
+ drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
+ drvs->rx_input_fifo_overflow_drop =
+ port_stats->rx_input_fifo_overflow;
+ drvs->rx_dropped_header_too_small =
+ port_stats->rx_dropped_header_too_small;
+ drvs->rx_address_match_errors =
+ port_stats->rx_address_match_errors;
+ drvs->rx_alignment_symbol_errors =
+ port_stats->rx_alignment_symbol_errors;
+
+ drvs->tx_pauseframes = port_stats->tx_pauseframes;
+ drvs->tx_controlframes = port_stats->tx_controlframes;
+
+ if (adapter->port_num)
+ drvs->jabber_events =
+ rxf_stats->port1_jabber_events;
+ else
+ drvs->jabber_events =
+ rxf_stats->port0_jabber_events;
+ drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
+ drvs->rx_drops_no_txpb = rxf_stats->rx_drops_no_txpb;
+ drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
+ drvs->rx_drops_invalid_ring = rxf_stats->rx_drops_invalid_ring;
+ drvs->forwarded_packets = rxf_stats->forwarded_packets;
+ drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
+ drvs->rx_drops_no_tpre_descr =
+ rxf_stats->rx_drops_no_tpre_descr;
+ drvs->rx_drops_too_many_frags =
+ rxf_stats->rx_drops_too_many_frags;
+ adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
+}
+
+static void populate_be3_stats(struct be_adapter *adapter)
+{
+ struct be_drv_stats *drvs = &adapter->drv_stats;
+ struct be_pmem_stats *pmem_sts = be_pmem_stats_from_cmd(adapter);
+
+ struct be_rxf_stats_v1 *rxf_stats =
+ be_rxf_stats_from_cmd(adapter);
+ struct be_port_rxf_stats_v1 *port_stats =
+ be_port_rxf_stats_from_cmd(adapter);
+
+ drvs->rx_priority_pause_frames = 0;
+ drvs->pmem_fifo_overflow_drop = 0;
+ drvs->rx_pause_frames = port_stats->rx_pause_frames;
+ drvs->rx_crc_errors = port_stats->rx_crc_errors;
+ drvs->rx_control_frames = port_stats->rx_control_frames;
+ drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
+ drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
+ drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
+ drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
+ drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
+ drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
+ drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
+ drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
+ drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
+ drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
+ drvs->rx_dropped_header_too_small =
+ port_stats->rx_dropped_header_too_small;
+ drvs->rx_input_fifo_overflow_drop =
+ port_stats->rx_input_fifo_overflow_drop;
+ drvs->rx_address_match_errors =
+ port_stats->rx_address_match_errors;
+ drvs->rx_alignment_symbol_errors =
+ port_stats->rx_alignment_symbol_errors;
+ drvs->rxpp_fifo_overflow_drop =
+ port_stats->rxpp_fifo_overflow_drop;
+ drvs->tx_pauseframes = port_stats->tx_pauseframes;
+ drvs->tx_controlframes = port_stats->tx_controlframes;
+ drvs->jabber_events = port_stats->jabber_events;
+ drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
+ drvs->rx_drops_no_txpb = rxf_stats->rx_drops_no_txpb;
+ drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
+ drvs->rx_drops_invalid_ring = rxf_stats->rx_drops_invalid_ring;
+ drvs->forwarded_packets = rxf_stats->forwarded_packets;
+ drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
+ drvs->rx_drops_no_tpre_descr =
+ rxf_stats->rx_drops_no_tpre_descr;
+ drvs->rx_drops_too_many_frags =
+ rxf_stats->rx_drops_too_many_frags;
+ adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
+}
+
+static void populate_lancer_stats(struct be_adapter *adapter)
+{
+
+ struct be_drv_stats *drvs = &adapter->drv_stats;
+ struct lancer_cmd_pport_stats *pport_stats = pport_stats_from_cmd
+ (adapter);
+ drvs->rx_priority_pause_frames = 0;
+ drvs->pmem_fifo_overflow_drop = 0;
+ drvs->rx_pause_frames =
+ make_64bit_val(pport_stats->rx_pause_frames_lo,
+ pport_stats->rx_pause_frames_hi);
+ drvs->rx_crc_errors = make_64bit_val(pport_stats->rx_crc_errors_hi,
+ pport_stats->rx_crc_errors_lo);
+ drvs->rx_control_frames =
+ make_64bit_val(pport_stats->rx_control_frames_hi,
+ pport_stats->rx_control_frames_lo);
+ drvs->rx_in_range_errors = pport_stats->rx_in_range_errors;
+ drvs->rx_frame_too_long =
+ make_64bit_val(pport_stats->rx_internal_mac_errors_hi,
+ pport_stats->rx_frames_too_long_lo);
+ drvs->rx_dropped_runt = pport_stats->rx_dropped_runt;
+ drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors;
+ drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors;
+ drvs->rx_udp_checksum_errs = pport_stats->rx_udp_checksum_errors;
+ drvs->rx_dropped_tcp_length =
+ pport_stats->rx_dropped_invalid_tcp_length;
+ drvs->rx_dropped_too_small = pport_stats->rx_dropped_too_small;
+ drvs->rx_dropped_too_short = pport_stats->rx_dropped_too_short;
+ drvs->rx_out_range_errors = pport_stats->rx_out_of_range_errors;
+ drvs->rx_dropped_header_too_small =
+ pport_stats->rx_dropped_header_too_small;
+ drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
+ drvs->rx_address_match_errors = pport_stats->rx_address_match_errors;
+ drvs->rx_alignment_symbol_errors =
+ make_64bit_val(pport_stats->rx_symbol_errors_hi,
+ pport_stats->rx_symbol_errors_lo);
+ drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
+ drvs->tx_pauseframes = make_64bit_val(pport_stats->tx_pause_frames_hi,
+ pport_stats->tx_pause_frames_lo);
+ drvs->tx_controlframes =
+ make_64bit_val(pport_stats->tx_control_frames_hi,
+ pport_stats->tx_control_frames_lo);
+ drvs->jabber_events = pport_stats->rx_jabbers;
+ drvs->rx_drops_no_pbuf = 0;
+ drvs->rx_drops_no_txpb = 0;
+ drvs->rx_drops_no_erx_descr = 0;
+ drvs->rx_drops_invalid_ring = pport_stats->rx_drops_invalid_queue;
+ drvs->forwarded_packets = make_64bit_val(pport_stats->num_forwards_hi,
+ pport_stats->num_forwards_lo);
+ drvs->rx_drops_mtu = make_64bit_val(pport_stats->rx_drops_mtu_hi,
+ pport_stats->rx_drops_mtu_lo);
+ drvs->rx_drops_no_tpre_descr = 0;
+ drvs->rx_drops_too_many_frags =
+ make_64bit_val(pport_stats->rx_drops_too_many_frags_hi,
+ pport_stats->rx_drops_too_many_frags_lo);
+}
+
+void be_parse_stats(struct be_adapter *adapter)
+{
+ if (adapter->generation == BE_GEN3) {
+ if (lancer_chip(adapter))
+ populate_lancer_stats(adapter);
+ else
+ populate_be3_stats(adapter);
+ } else {
+ populate_be2_stats(adapter);
+ }
+}
+
void netdev_stats_update(struct be_adapter *adapter)
{
- struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats_cmd.va);
- struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
- struct be_port_rxf_stats *port_stats =
- &rxf_stats->port[adapter->port_num];
+ struct be_drv_stats *drvs = &adapter->drv_stats;
struct net_device_stats *dev_stats = &adapter->netdev->stats;
- struct be_erx_stats *erx_stats = &hw_stats->erx;
struct be_rx_obj *rxo;
int i;
@@ -267,43 +434,54 @@
dev_stats->rx_bytes += rx_stats(rxo)->rx_bytes;
dev_stats->multicast += rx_stats(rxo)->rx_mcast_pkts;
/* no space in linux buffers: best possible approximation */
- dev_stats->rx_dropped +=
- erx_stats->rx_drops_no_fragments[rxo->q.id];
+ if (adapter->generation == BE_GEN3) {
+ if (!(lancer_chip(adapter))) {
+ struct be_erx_stats_v1 *erx_stats =
+ be_erx_stats_from_cmd(adapter);
+ dev_stats->rx_dropped +=
+ erx_stats->rx_drops_no_fragments[rxo->q.id];
+ }
+ } else {
+ struct be_erx_stats_v0 *erx_stats =
+ be_erx_stats_from_cmd(adapter);
+ dev_stats->rx_dropped +=
+ erx_stats->rx_drops_no_fragments[rxo->q.id];
+ }
}
dev_stats->tx_packets = tx_stats(adapter)->be_tx_pkts;
dev_stats->tx_bytes = tx_stats(adapter)->be_tx_bytes;
/* bad pkts received */
- dev_stats->rx_errors = port_stats->rx_crc_errors +
- port_stats->rx_alignment_symbol_errors +
- port_stats->rx_in_range_errors +
- port_stats->rx_out_range_errors +
- port_stats->rx_frame_too_long +
- port_stats->rx_dropped_too_small +
- port_stats->rx_dropped_too_short +
- port_stats->rx_dropped_header_too_small +
- port_stats->rx_dropped_tcp_length +
- port_stats->rx_dropped_runt +
- port_stats->rx_tcp_checksum_errs +
- port_stats->rx_ip_checksum_errs +
- port_stats->rx_udp_checksum_errs;
+ dev_stats->rx_errors = drvs->rx_crc_errors +
+ drvs->rx_alignment_symbol_errors +
+ drvs->rx_in_range_errors +
+ drvs->rx_out_range_errors +
+ drvs->rx_frame_too_long +
+ drvs->rx_dropped_too_small +
+ drvs->rx_dropped_too_short +
+ drvs->rx_dropped_header_too_small +
+ drvs->rx_dropped_tcp_length +
+ drvs->rx_dropped_runt +
+ drvs->rx_tcp_checksum_errs +
+ drvs->rx_ip_checksum_errs +
+ drvs->rx_udp_checksum_errs;
/* detailed rx errors */
- dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
- port_stats->rx_out_range_errors +
- port_stats->rx_frame_too_long;
+ dev_stats->rx_length_errors = drvs->rx_in_range_errors +
+ drvs->rx_out_range_errors +
+ drvs->rx_frame_too_long;
- dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
+ dev_stats->rx_crc_errors = drvs->rx_crc_errors;
/* frame alignment errors */
- dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+ dev_stats->rx_frame_errors = drvs->rx_alignment_symbol_errors;
/* receiver fifo overrun */
/* drops_no_pbuf is no per i/f, it's per BE card */
- dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
- port_stats->rx_input_fifo_overflow +
- rxf_stats->rx_drops_no_pbuf;
+ dev_stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop +
+ drvs->rx_input_fifo_overflow_drop +
+ drvs->rx_drops_no_pbuf;
}
void be_link_status_update(struct be_adapter *adapter, bool link_up)
@@ -703,7 +881,7 @@
struct be_adapter *adapter = netdev_priv(netdev);
if (netdev->flags & IFF_PROMISC) {
- be_cmd_promiscuous_config(adapter, adapter->port_num, 1);
+ be_cmd_promiscuous_config(adapter, true);
adapter->promiscuous = true;
goto done;
}
@@ -711,7 +889,7 @@
/* BE was previously in promiscuous mode; disable it */
if (adapter->promiscuous) {
adapter->promiscuous = false;
- be_cmd_promiscuous_config(adapter, adapter->port_num, 0);
+ be_cmd_promiscuous_config(adapter, false);
}
/* Enable multicast promisc if num configured exceeds what we support */
@@ -993,9 +1171,10 @@
struct be_rx_obj *rxo,
struct be_rx_compl_info *rxcp)
{
+ struct net_device *netdev = adapter->netdev;
struct sk_buff *skb;
- skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
+ skb = netdev_alloc_skb_ip_align(netdev, BE_HDR_LEN);
if (unlikely(!skb)) {
if (net_ratelimit())
dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
@@ -1005,20 +1184,24 @@
skb_fill_rx_data(adapter, rxo, skb, rxcp);
- if (likely(adapter->rx_csum && csum_passed(rxcp)))
+ if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb_checksum_none_assert(skb);
skb->truesize = skb->len + sizeof(struct sk_buff);
- skb->protocol = eth_type_trans(skb, adapter->netdev);
+ skb->protocol = eth_type_trans(skb, netdev);
+ if (adapter->netdev->features & NETIF_F_RXHASH)
+ skb->rxhash = rxcp->rss_hash;
+
if (unlikely(rxcp->vlanf)) {
if (!adapter->vlan_grp || adapter->vlans_added == 0) {
kfree_skb(skb);
return;
}
- vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, rxcp->vid);
+ vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
+ rxcp->vlan_tag);
} else {
netif_receive_skb(skb);
}
@@ -1072,11 +1255,14 @@
skb->data_len = rxcp->pkt_size;
skb->truesize += rxcp->pkt_size;
skb->ip_summed = CHECKSUM_UNNECESSARY;
+ if (adapter->netdev->features & NETIF_F_RXHASH)
+ skb->rxhash = rxcp->rss_hash;
if (likely(!rxcp->vlanf))
napi_gro_frags(&eq_obj->napi);
else
- vlan_gro_frags(&eq_obj->napi, adapter->vlan_grp, rxcp->vid);
+ vlan_gro_frags(&eq_obj->napi, adapter->vlan_grp,
+ rxcp->vlan_tag);
}
static void be_parse_rx_compl_v1(struct be_adapter *adapter,
@@ -1101,8 +1287,14 @@
AMAP_GET_BITS(struct amap_eth_rx_compl_v1, numfrags, compl);
rxcp->pkt_type =
AMAP_GET_BITS(struct amap_eth_rx_compl_v1, cast_enc, compl);
- rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm, compl);
- rxcp->vid = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag, compl);
+ rxcp->rss_hash =
+ AMAP_GET_BITS(struct amap_eth_rx_compl_v1, rsshash, rxcp);
+ if (rxcp->vlanf) {
+ rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm,
+ compl);
+ rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag,
+ compl);
+ }
}
static void be_parse_rx_compl_v0(struct be_adapter *adapter,
@@ -1127,8 +1319,14 @@
AMAP_GET_BITS(struct amap_eth_rx_compl_v0, numfrags, compl);
rxcp->pkt_type =
AMAP_GET_BITS(struct amap_eth_rx_compl_v0, cast_enc, compl);
- rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm, compl);
- rxcp->vid = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag, compl);
+ rxcp->rss_hash =
+ AMAP_GET_BITS(struct amap_eth_rx_compl_v0, rsshash, rxcp);
+ if (rxcp->vlanf) {
+ rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm,
+ compl);
+ rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag,
+ compl);
+ }
}
static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
@@ -1150,15 +1348,20 @@
else
be_parse_rx_compl_v0(adapter, compl, rxcp);
- /* vlanf could be wrongly set in some cards. ignore if vtm is not set */
- if ((adapter->function_mode & 0x400) && !rxcp->vtm)
- rxcp->vlanf = 0;
+ if (rxcp->vlanf) {
+ /* vlanf could be wrongly set in some cards.
+ * ignore if vtm is not set */
+ if ((adapter->function_mode & 0x400) && !rxcp->vtm)
+ rxcp->vlanf = 0;
- if (!lancer_chip(adapter))
- rxcp->vid = swab16(rxcp->vid);
+ if (!lancer_chip(adapter))
+ rxcp->vlan_tag = swab16(rxcp->vlan_tag);
- if ((adapter->pvid == rxcp->vid) && !adapter->vlan_tag[rxcp->vid])
- rxcp->vlanf = 0;
+ if (((adapter->pvid & VLAN_VID_MASK) ==
+ (rxcp->vlan_tag & VLAN_VID_MASK)) &&
+ !adapter->vlan_tag[rxcp->vlan_tag])
+ rxcp->vlanf = 0;
+ }
/* As the compl has been parsed, reset it; we wont touch it again */
compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0;
@@ -1255,7 +1458,7 @@
return txcp;
}
-static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
+static u16 be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
{
struct be_queue_info *txq = &adapter->tx_obj.q;
struct be_eth_wrb *wrb;
@@ -1282,9 +1485,8 @@
queue_tail_inc(txq);
} while (cur_index != last_index);
- atomic_sub(num_wrbs, &txq->used);
-
kfree_skb(sent_skb);
+ return num_wrbs;
}
static inline struct be_eq_entry *event_get(struct be_eq_obj *eq_obj)
@@ -1367,7 +1569,7 @@
struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
struct be_queue_info *txq = &adapter->tx_obj.q;
struct be_eth_tx_compl *txcp;
- u16 end_idx, cmpl = 0, timeo = 0;
+ u16 end_idx, cmpl = 0, timeo = 0, num_wrbs = 0;
struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
struct sk_buff *sent_skb;
bool dummy_wrb;
@@ -1377,12 +1579,14 @@
while ((txcp = be_tx_compl_get(tx_cq))) {
end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
wrb_index, txcp);
- be_tx_compl_process(adapter, end_idx);
+ num_wrbs += be_tx_compl_process(adapter, end_idx);
cmpl++;
}
if (cmpl) {
be_cq_notify(adapter, tx_cq->id, false, cmpl);
+ atomic_sub(num_wrbs, &txq->used);
cmpl = 0;
+ num_wrbs = 0;
}
if (atomic_read(&txq->used) == 0 || ++timeo > 200)
@@ -1402,7 +1606,8 @@
index_adv(&end_idx,
wrb_cnt_for_skb(adapter, sent_skb, &dummy_wrb) - 1,
txq->len);
- be_tx_compl_process(adapter, end_idx);
+ num_wrbs = be_tx_compl_process(adapter, end_idx);
+ atomic_sub(num_wrbs, &txq->used);
}
}
@@ -1567,12 +1772,31 @@
}
}
+static u32 be_num_rxqs_want(struct be_adapter *adapter)
+{
+ if (multi_rxq && (adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
+ !adapter->sriov_enabled && !(adapter->function_mode & 0x400)) {
+ return 1 + MAX_RSS_QS; /* one default non-RSS queue */
+ } else {
+ dev_warn(&adapter->pdev->dev,
+ "No support for multiple RX queues\n");
+ return 1;
+ }
+}
+
static int be_rx_queues_create(struct be_adapter *adapter)
{
struct be_queue_info *eq, *q, *cq;
struct be_rx_obj *rxo;
int rc, i;
+ adapter->num_rx_qs = min(be_num_rxqs_want(adapter),
+ msix_enabled(adapter) ?
+ adapter->num_msix_vec - 1 : 1);
+ if (adapter->num_rx_qs != MAX_RX_QS)
+ dev_warn(&adapter->pdev->dev,
+ "Can create only %d RX queues", adapter->num_rx_qs);
+
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
for_all_rx_queues(adapter, rxo, i) {
rxo->adapter = adapter;
@@ -1718,12 +1942,15 @@
break;
/* Ignore flush completions */
- if (rxcp->num_rcvd) {
+ if (rxcp->num_rcvd && rxcp->pkt_size) {
if (do_gro(rxcp))
be_rx_compl_process_gro(adapter, rxo, rxcp);
else
be_rx_compl_process(adapter, rxo, rxcp);
+ } else if (rxcp->pkt_size == 0) {
+ be_rx_compl_discard(adapter, rxo, rxcp);
}
+
be_rx_stats_update(rxo, rxcp);
}
@@ -1754,12 +1981,12 @@
struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
struct be_eth_tx_compl *txcp;
int tx_compl = 0, mcc_compl, status = 0;
- u16 end_idx;
+ u16 end_idx, num_wrbs = 0;
while ((txcp = be_tx_compl_get(tx_cq))) {
end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
wrb_index, txcp);
- be_tx_compl_process(adapter, end_idx);
+ num_wrbs += be_tx_compl_process(adapter, end_idx);
tx_compl++;
}
@@ -1775,6 +2002,8 @@
if (tx_compl) {
be_cq_notify(adapter, adapter->tx_obj.cq.id, true, tx_compl);
+ atomic_sub(num_wrbs, &txq->used);
+
/* As Tx wrbs have been freed up, wake up netdev queue if
* it was stopped due to lack of tx wrbs.
*/
@@ -1837,6 +2066,9 @@
struct be_rx_obj *rxo;
int i;
+ if (!adapter->ue_detected && !lancer_chip(adapter))
+ be_detect_dump_ue(adapter);
+
/* when interrupts are not yet enabled, just reap any pending
* mcc completions */
if (!netif_running(adapter->netdev)) {
@@ -1849,15 +2081,16 @@
be_cq_notify(adapter, mcc_obj->cq.id, false, mcc_compl);
}
- if (!adapter->ue_detected && !lancer_chip(adapter))
- be_detect_dump_ue(adapter);
-
goto reschedule;
}
- if (!adapter->stats_cmd_sent)
- be_cmd_get_stats(adapter, &adapter->stats_cmd);
-
+ if (!adapter->stats_cmd_sent) {
+ if (lancer_chip(adapter))
+ lancer_cmd_get_pport_stats(adapter,
+ &adapter->stats_cmd);
+ else
+ be_cmd_get_stats(adapter, &adapter->stats_cmd);
+ }
be_tx_rate_update(adapter);
for_all_rx_queues(adapter, rxo, i) {
@@ -1869,60 +2102,43 @@
be_post_rx_frags(rxo, GFP_KERNEL);
}
}
- if (!adapter->ue_detected && !lancer_chip(adapter))
- be_detect_dump_ue(adapter);
reschedule:
+ adapter->work_counter++;
schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
}
static void be_msix_disable(struct be_adapter *adapter)
{
- if (adapter->msix_enabled) {
+ if (msix_enabled(adapter)) {
pci_disable_msix(adapter->pdev);
- adapter->msix_enabled = false;
- }
-}
-
-static int be_num_rxqs_get(struct be_adapter *adapter)
-{
- if (multi_rxq && (adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
- !adapter->sriov_enabled && !(adapter->function_mode & 0x400)) {
- return 1 + MAX_RSS_QS; /* one default non-RSS queue */
- } else {
- dev_warn(&adapter->pdev->dev,
- "No support for multiple RX queues\n");
- return 1;
+ adapter->num_msix_vec = 0;
}
}
static void be_msix_enable(struct be_adapter *adapter)
{
#define BE_MIN_MSIX_VECTORS (1 + 1) /* Rx + Tx */
- int i, status;
+ int i, status, num_vec;
- adapter->num_rx_qs = be_num_rxqs_get(adapter);
+ num_vec = be_num_rxqs_want(adapter) + 1;
- for (i = 0; i < (adapter->num_rx_qs + 1); i++)
+ for (i = 0; i < num_vec; i++)
adapter->msix_entries[i].entry = i;
- status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- adapter->num_rx_qs + 1);
+ status = pci_enable_msix(adapter->pdev, adapter->msix_entries, num_vec);
if (status == 0) {
goto done;
} else if (status >= BE_MIN_MSIX_VECTORS) {
+ num_vec = status;
if (pci_enable_msix(adapter->pdev, adapter->msix_entries,
- status) == 0) {
- adapter->num_rx_qs = status - 1;
- dev_warn(&adapter->pdev->dev,
- "Could alloc only %d MSIx vectors. "
- "Using %d RX Qs\n", status, adapter->num_rx_qs);
+ num_vec) == 0)
goto done;
- }
}
return;
done:
- adapter->msix_enabled = true;
+ adapter->num_msix_vec = num_vec;
+ return;
}
static void be_sriov_enable(struct be_adapter *adapter)
@@ -1930,7 +2146,20 @@
be_check_sriov_fn_type(adapter);
#ifdef CONFIG_PCI_IOV
if (be_physfn(adapter) && num_vfs) {
- int status;
+ int status, pos;
+ u16 nvfs;
+
+ pos = pci_find_ext_capability(adapter->pdev,
+ PCI_EXT_CAP_ID_SRIOV);
+ pci_read_config_word(adapter->pdev,
+ pos + PCI_SRIOV_TOTAL_VF, &nvfs);
+
+ if (num_vfs > nvfs) {
+ dev_info(&adapter->pdev->dev,
+ "Device supports %d VFs and not %d\n",
+ nvfs, num_vfs);
+ num_vfs = nvfs;
+ }
status = pci_enable_sriov(adapter->pdev, num_vfs);
adapter->sriov_enabled = status ? false : true;
@@ -2003,8 +2232,7 @@
err:
dev_warn(&adapter->pdev->dev,
"MSIX Request IRQ failed - err %d\n", status);
- pci_disable_msix(adapter->pdev);
- adapter->msix_enabled = false;
+ be_msix_disable(adapter);
return status;
}
@@ -2013,7 +2241,7 @@
struct net_device *netdev = adapter->netdev;
int status;
- if (adapter->msix_enabled) {
+ if (msix_enabled(adapter)) {
status = be_msix_register(adapter);
if (status == 0)
goto done;
@@ -2046,7 +2274,7 @@
return;
/* INTx */
- if (!adapter->msix_enabled) {
+ if (!msix_enabled(adapter)) {
free_irq(netdev->irq, adapter);
goto done;
}
@@ -2088,7 +2316,7 @@
be_cq_notify(adapter, rxo->cq.id, false, 0);
}
- if (adapter->msix_enabled) {
+ if (msix_enabled(adapter)) {
vec = be_msix_vec_get(adapter, tx_eq);
synchronize_irq(vec);
@@ -2141,7 +2369,7 @@
be_async_mcc_enable(adapter);
status = be_cmd_link_status_query(adapter, &link_up, &mac_speed,
- &link_speed);
+ &link_speed, 0);
if (status)
goto err;
be_link_status_update(adapter, link_up);
@@ -2261,7 +2489,7 @@
BE_IF_FLAGS_PASS_L3L4_ERRORS;
en_flags |= BE_IF_FLAGS_PASS_L3L4_ERRORS;
- if (be_multi_rxq(adapter)) {
+ if (adapter->function_caps & BE_FUNCTION_CAPS_RSS) {
cap_flags |= BE_IF_FLAGS_RSS;
en_flags |= BE_IF_FLAGS_RSS;
}
@@ -2318,7 +2546,6 @@
return 0;
- be_mcc_queues_destroy(adapter);
rx_qs_destroy:
be_rx_queues_destroy(adapter);
tx_qs_destroy:
@@ -2486,7 +2713,6 @@
"cmd to write to flash rom failed.\n");
return -1;
}
- yield();
}
}
return 0;
@@ -2504,32 +2730,96 @@
return 0;
}
-int be_load_fw(struct be_adapter *adapter, u8 *func)
+static int lancer_fw_download(struct be_adapter *adapter,
+ const struct firmware *fw)
{
- char fw_file[ETHTOOL_FLASH_MAX_FILENAME];
- const struct firmware *fw;
+#define LANCER_FW_DOWNLOAD_CHUNK (32 * 1024)
+#define LANCER_FW_DOWNLOAD_LOCATION "/prg"
+ struct be_dma_mem flash_cmd;
+ const u8 *data_ptr = NULL;
+ u8 *dest_image_ptr = NULL;
+ size_t image_size = 0;
+ u32 chunk_size = 0;
+ u32 data_written = 0;
+ u32 offset = 0;
+ int status = 0;
+ u8 add_status = 0;
+
+ if (!IS_ALIGNED(fw->size, sizeof(u32))) {
+ dev_err(&adapter->pdev->dev,
+ "FW Image not properly aligned. "
+ "Length must be 4 byte aligned.\n");
+ status = -EINVAL;
+ goto lancer_fw_exit;
+ }
+
+ flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+ + LANCER_FW_DOWNLOAD_CHUNK;
+ flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size,
+ &flash_cmd.dma, GFP_KERNEL);
+ if (!flash_cmd.va) {
+ status = -ENOMEM;
+ dev_err(&adapter->pdev->dev,
+ "Memory allocation failure while flashing\n");
+ goto lancer_fw_exit;
+ }
+
+ dest_image_ptr = flash_cmd.va +
+ sizeof(struct lancer_cmd_req_write_object);
+ image_size = fw->size;
+ data_ptr = fw->data;
+
+ while (image_size) {
+ chunk_size = min_t(u32, image_size, LANCER_FW_DOWNLOAD_CHUNK);
+
+ /* Copy the image chunk content. */
+ memcpy(dest_image_ptr, data_ptr, chunk_size);
+
+ status = lancer_cmd_write_object(adapter, &flash_cmd,
+ chunk_size, offset, LANCER_FW_DOWNLOAD_LOCATION,
+ &data_written, &add_status);
+
+ if (status)
+ break;
+
+ offset += data_written;
+ data_ptr += data_written;
+ image_size -= data_written;
+ }
+
+ if (!status) {
+ /* Commit the FW written */
+ status = lancer_cmd_write_object(adapter, &flash_cmd,
+ 0, offset, LANCER_FW_DOWNLOAD_LOCATION,
+ &data_written, &add_status);
+ }
+
+ dma_free_coherent(&adapter->pdev->dev, flash_cmd.size, flash_cmd.va,
+ flash_cmd.dma);
+ if (status) {
+ dev_err(&adapter->pdev->dev,
+ "Firmware load error. "
+ "Status code: 0x%x Additional Status: 0x%x\n",
+ status, add_status);
+ goto lancer_fw_exit;
+ }
+
+ dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
+lancer_fw_exit:
+ return status;
+}
+
+static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw)
+{
struct flash_file_hdr_g2 *fhdr;
struct flash_file_hdr_g3 *fhdr3;
struct image_hdr *img_hdr_ptr = NULL;
struct be_dma_mem flash_cmd;
- int status, i = 0, num_imgs = 0;
const u8 *p;
-
- if (!netif_running(adapter->netdev)) {
- dev_err(&adapter->pdev->dev,
- "Firmware load not allowed (interface is down)\n");
- return -EPERM;
- }
-
- strcpy(fw_file, func);
-
- status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
- if (status)
- goto fw_exit;
+ int status = 0, i = 0, num_imgs = 0;
p = fw->data;
fhdr = (struct flash_file_hdr_g2 *) p;
- dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
flash_cmd.size = sizeof(struct be_cmd_write_flashrom) + 32*1024;
flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size,
@@ -2538,7 +2828,7 @@
status = -ENOMEM;
dev_err(&adapter->pdev->dev,
"Memory allocation failure while flashing\n");
- goto fw_exit;
+ goto be_fw_exit;
}
if ((adapter->generation == BE_GEN3) &&
@@ -2566,11 +2856,37 @@
flash_cmd.dma);
if (status) {
dev_err(&adapter->pdev->dev, "Firmware load error\n");
- goto fw_exit;
+ goto be_fw_exit;
}
dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
+be_fw_exit:
+ return status;
+}
+
+int be_load_fw(struct be_adapter *adapter, u8 *fw_file)
+{
+ const struct firmware *fw;
+ int status;
+
+ if (!netif_running(adapter->netdev)) {
+ dev_err(&adapter->pdev->dev,
+ "Firmware load not allowed (interface is down)\n");
+ return -1;
+ }
+
+ status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
+ if (status)
+ goto fw_exit;
+
+ dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
+
+ if (lancer_chip(adapter))
+ status = lancer_fw_download(adapter, fw);
+ else
+ status = be_fw_download(adapter, fw);
+
fw_exit:
release_firmware(fw);
return status;
@@ -2599,10 +2915,14 @@
struct be_rx_obj *rxo;
int i;
- netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_GRO | NETIF_F_TSO6;
+ netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_TX;
+ if (be_multi_rxq(adapter))
+ netdev->hw_features |= NETIF_F_RXHASH;
+
+ netdev->features |= netdev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
@@ -2612,8 +2932,6 @@
netdev->flags |= IFF_MULTICAST;
- adapter->rx_csum = true;
-
/* Default settings for Rx and Tx flow control */
adapter->rx_fc = true;
adapter->tx_fc = true;
@@ -2781,7 +3099,14 @@
{
struct be_dma_mem *cmd = &adapter->stats_cmd;
- cmd->size = sizeof(struct be_cmd_req_get_stats);
+ if (adapter->generation == BE_GEN2) {
+ cmd->size = sizeof(struct be_cmd_req_get_stats_v0);
+ } else {
+ if (lancer_chip(adapter))
+ cmd->size = sizeof(struct lancer_cmd_req_pport_stats);
+ else
+ cmd->size = sizeof(struct be_cmd_req_get_stats_v1);
+ }
cmd->va = dma_alloc_coherent(&adapter->pdev->dev, cmd->size, &cmd->dma,
GFP_KERNEL);
if (cmd->va == NULL)
@@ -2807,6 +3132,7 @@
be_ctrl_cleanup(adapter);
+ kfree(adapter->vf_cfg);
be_sriov_disable(adapter);
be_msix_disable(adapter);
@@ -2834,7 +3160,8 @@
memset(mac, 0, ETH_ALEN);
- if (be_physfn(adapter)) {
+ /* A default permanent address is given to each VF for Lancer*/
+ if (be_physfn(adapter) || lancer_chip(adapter)) {
status = be_cmd_mac_addr_query(adapter, mac,
MAC_ADDRESS_TYPE_NETWORK, true /*permanent */, 0);
@@ -2876,6 +3203,7 @@
adapter->generation = BE_GEN3;
break;
case OC_DEVICE_ID3:
+ case OC_DEVICE_ID4:
pci_read_config_dword(pdev, SLI_INTF_REG_OFFSET, &sli_intf);
if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
SLI_INTF_IF_TYPE_SHIFT;
@@ -2885,10 +3213,6 @@
dev_err(&pdev->dev, "SLI_INTF reg val is not valid\n");
return -EINVAL;
}
- if (num_vfs > 0) {
- dev_err(&pdev->dev, "VFs not supported\n");
- return -EINVAL;
- }
adapter->sli_family = ((sli_intf & SLI_INTF_FAMILY_MASK) >>
SLI_INTF_FAMILY_SHIFT);
adapter->generation = BE_GEN3;
@@ -2991,16 +3315,23 @@
}
be_sriov_enable(adapter);
+ if (adapter->sriov_enabled) {
+ adapter->vf_cfg = kcalloc(num_vfs,
+ sizeof(struct be_vf_cfg), GFP_KERNEL);
+
+ if (!adapter->vf_cfg)
+ goto free_netdev;
+ }
status = be_ctrl_init(adapter);
if (status)
- goto free_netdev;
+ goto free_vf_cfg;
if (lancer_chip(adapter)) {
status = lancer_test_and_set_rdy_state(adapter);
if (status) {
dev_err(&pdev->dev, "Adapter in non recoverable error\n");
- goto free_netdev;
+ goto ctrl_clean;
}
}
@@ -3043,9 +3374,24 @@
netif_carrier_off(netdev);
if (be_physfn(adapter) && adapter->sriov_enabled) {
- status = be_vf_eth_addr_config(adapter);
- if (status)
- goto unreg_netdev;
+ u8 mac_speed;
+ bool link_up;
+ u16 vf, lnk_speed;
+
+ if (!lancer_chip(adapter)) {
+ status = be_vf_eth_addr_config(adapter);
+ if (status)
+ goto unreg_netdev;
+ }
+
+ for (vf = 0; vf < num_vfs; vf++) {
+ status = be_cmd_link_status_query(adapter, &link_up,
+ &mac_speed, &lnk_speed, vf + 1);
+ if (!status)
+ adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10;
+ else
+ goto unreg_netdev;
+ }
}
dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
@@ -3062,6 +3408,8 @@
be_stats_cleanup(adapter);
ctrl_clean:
be_ctrl_cleanup(adapter);
+free_vf_cfg:
+ kfree(adapter->vf_cfg);
free_netdev:
be_sriov_disable(adapter);
free_netdev(netdev);
@@ -3146,16 +3494,15 @@
if (!adapter)
return;
- if (netif_running(adapter->netdev))
- cancel_delayed_work_sync(&adapter->work);
+ cancel_delayed_work_sync(&adapter->work);
netif_device_detach(adapter->netdev);
- be_cmd_reset_function(adapter);
-
if (adapter->wol)
be_setup_wol(adapter, true);
+ be_cmd_reset_function(adapter);
+
pci_disable_device(pdev);
}
@@ -3267,13 +3614,6 @@
rx_frag_size = 2048;
}
- if (num_vfs > 32) {
- printk(KERN_WARNING DRV_NAME
- " : Module param num_vfs must not be greater than 32."
- "Using 32\n");
- num_vfs = 32;
- }
-
return pci_register_driver(&be_driver);
}
module_init(be_init_module);
diff --git a/drivers/net/bna/bfa_ioc.c b/drivers/net/bna/bfa_ioc.c
index 7581518ec..fcb9bb3 100644
--- a/drivers/net/bna/bfa_ioc.c
+++ b/drivers/net/bna/bfa_ioc.c
@@ -82,7 +82,6 @@
static void bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type,
u32 boot_param);
static u32 bfa_ioc_smem_pgnum(struct bfa_ioc *ioc, u32 fmaddr);
-static u32 bfa_ioc_smem_pgoff(struct bfa_ioc *ioc, u32 fmaddr);
static void bfa_ioc_get_adapter_serial_num(struct bfa_ioc *ioc,
char *serial_num);
static void bfa_ioc_get_adapter_fw_ver(struct bfa_ioc *ioc,
@@ -1274,13 +1273,12 @@
void
bfa_nw_ioc_fwver_get(struct bfa_ioc *ioc, struct bfi_ioc_image_hdr *fwhdr)
{
- u32 pgnum, pgoff;
+ u32 pgnum;
u32 loff = 0;
int i;
u32 *fwsig = (u32 *) fwhdr;
pgnum = bfa_ioc_smem_pgnum(ioc, loff);
- pgoff = bfa_ioc_smem_pgoff(ioc, loff);
writel(pgnum, ioc->ioc_regs.host_page_num_fn);
for (i = 0; i < (sizeof(struct bfi_ioc_image_hdr) / sizeof(u32));
@@ -1514,7 +1512,7 @@
u32 boot_env)
{
u32 *fwimg;
- u32 pgnum, pgoff;
+ u32 pgnum;
u32 loff = 0;
u32 chunkno = 0;
u32 i;
@@ -1527,7 +1525,6 @@
fwimg = bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), chunkno);
pgnum = bfa_ioc_smem_pgnum(ioc, loff);
- pgoff = bfa_ioc_smem_pgoff(ioc, loff);
writel(pgnum, ioc->ioc_regs.host_page_num_fn);
@@ -1925,12 +1922,6 @@
return PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, fmaddr);
}
-static u32
-bfa_ioc_smem_pgoff(struct bfa_ioc *ioc, u32 fmaddr)
-{
- return PSS_SMEM_PGOFF(fmaddr);
-}
-
/**
* Register mailbox message handler function, to be called by common modules
*/
diff --git a/drivers/net/bna/bna_ctrl.c b/drivers/net/bna/bna_ctrl.c
index e152747..53b1416 100644
--- a/drivers/net/bna/bna_ctrl.c
+++ b/drivers/net/bna/bna_ctrl.c
@@ -246,7 +246,6 @@
bna_mbox_flush_q(struct bna *bna, struct list_head *q)
{
struct bna_mbox_qe *mb_qe = NULL;
- struct bfi_mhdr *cmd_h;
struct list_head *mb_q;
void (*cbfn)(void *arg, int status);
void *cbarg;
@@ -260,7 +259,6 @@
bfa_q_qe_init(mb_qe);
bna->mbox_mod.msg_pending--;
- cmd_h = (struct bfi_mhdr *)(&mb_qe->cmd.msg[0]);
if (cbfn)
cbfn(cbarg, BNA_CB_NOT_EXEC);
}
@@ -2774,23 +2772,6 @@
}
}
-static void
-bna_rit_mod_uninit(struct bna_rit_mod *rit_mod)
-{
- struct bna_rit_segment *rit_segment;
- struct list_head *qe;
- int i;
- int j;
-
- for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
- j = 0;
- list_for_each(qe, &rit_mod->rit_seg_pool[i]) {
- rit_segment = (struct bna_rit_segment *)qe;
- j++;
- }
- }
-}
-
/*
* Public functions
*/
@@ -2977,8 +2958,6 @@
bna_ucam_mod_uninit(&bna->ucam_mod);
- bna_rit_mod_uninit(&bna->rit_mod);
-
bna_ib_mod_uninit(&bna->ib_mod);
bna_rx_mod_uninit(&bna->rx_mod);
diff --git a/drivers/net/bna/bna_txrx.c b/drivers/net/bna/bna_txrx.c
index 58c7664..380085c 100644
--- a/drivers/net/bna/bna_txrx.c
+++ b/drivers/net/bna/bna_txrx.c
@@ -2229,14 +2229,11 @@
bna_rit_create(struct bna_rx *rx)
{
struct list_head *qe_rxp;
- struct bna *bna;
struct bna_rxp *rxp;
struct bna_rxq *q0 = NULL;
struct bna_rxq *q1 = NULL;
int offset;
- bna = rx->bna;
-
offset = 0;
list_for_each(qe_rxp, &rx->rxp_q) {
rxp = (struct bna_rxp *)qe_rxp;
@@ -2830,7 +2827,7 @@
struct bna_mem_descr *dsqpt_mem; /* s/w qpt for data */
struct bna_mem_descr *hpage_mem; /* hdr page mem */
struct bna_mem_descr *dpage_mem; /* data page mem */
- int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0, ret;
+ int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0;
int dpage_count, hpage_count, rcb_idx;
struct bna_ib_config ibcfg;
/* Fail if we don't have enough RXPs, RXQs */
@@ -2924,7 +2921,7 @@
ibcfg.interpkt_timeo = BFI_RX_INTERPKT_TIMEO;
ibcfg.ctrl_flags = BFI_IB_CF_INT_ENABLE;
- ret = bna_ib_config(rxp->cq.ib, &ibcfg);
+ bna_ib_config(rxp->cq.ib, &ibcfg);
/* Link rxqs to rxp */
_rxp_add_rxqs(rxp, q0, q1);
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index 8e6ceab..e588511 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -501,7 +501,7 @@
skb_put(skb, ntohs(cmpl->length));
if (likely
- (bnad->rx_csum &&
+ ((bnad->netdev->features & NETIF_F_RXCSUM) &&
(((flags & BNA_CQ_EF_IPV4) &&
(flags & BNA_CQ_EF_L3_CKSUM_OK)) ||
(flags & BNA_CQ_EF_IPV6)) &&
@@ -2902,23 +2902,20 @@
{
struct net_device *netdev = bnad->netdev;
- netdev->features |= NETIF_F_IPV6_CSUM;
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_HW_VLAN_TX;
- netdev->features |= NETIF_F_GRO;
- pr_warn("bna: GRO enabled, using kernel stack GRO\n");
+ netdev->vlan_features = NETIF_F_SG | NETIF_F_HIGHDMA |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO6;
- netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ netdev->features |= netdev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
if (using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->features |=
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
-
- netdev->vlan_features = netdev->features;
netdev->mem_start = bnad->mmio_start;
netdev->mem_end = bnad->mmio_start + bnad->mmio_len - 1;
@@ -2969,7 +2966,6 @@
bnad->txq_depth = BNAD_TXQ_DEPTH;
bnad->rxq_depth = BNAD_RXQ_DEPTH;
- bnad->rx_csum = true;
bnad->tx_coalescing_timeo = BFI_TX_COALESCING_TIMEO;
bnad->rx_coalescing_timeo = BFI_RX_COALESCING_TIMEO;
diff --git a/drivers/net/bna/bnad.h b/drivers/net/bna/bnad.h
index a89117f..ccdabad 100644
--- a/drivers/net/bna/bnad.h
+++ b/drivers/net/bna/bnad.h
@@ -237,8 +237,6 @@
struct bna_rx_config rx_config[BNAD_MAX_RXS];
struct bna_tx_config tx_config[BNAD_MAX_TXS];
- u32 rx_csum;
-
void __iomem *bar0; /* BAR0 address */
struct bna bna;
diff --git a/drivers/net/bna/bnad_ethtool.c b/drivers/net/bna/bnad_ethtool.c
index 142d604..3330cd78 100644
--- a/drivers/net/bna/bnad_ethtool.c
+++ b/drivers/net/bna/bnad_ethtool.c
@@ -237,10 +237,10 @@
cmd->phy_address = 0;
if (netif_carrier_ok(netdev)) {
- cmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(cmd, SPEED_10000);
cmd->duplex = DUPLEX_FULL;
} else {
- cmd->speed = -1;
+ ethtool_cmd_speed_set(cmd, -1);
cmd->duplex = -1;
}
cmd->transceiver = XCVR_EXTERNAL;
@@ -256,7 +256,8 @@
/* 10G full duplex setting supported only */
if (cmd->autoneg == AUTONEG_ENABLE)
return -EOPNOTSUPP; else {
- if ((cmd->speed == SPEED_10000) && (cmd->duplex == DUPLEX_FULL))
+ if ((ethtool_cmd_speed(cmd) == SPEED_10000)
+ && (cmd->duplex == DUPLEX_FULL))
return 0;
}
@@ -806,61 +807,6 @@
return 0;
}
-static u32
-bnad_get_rx_csum(struct net_device *netdev)
-{
- u32 rx_csum;
- struct bnad *bnad = netdev_priv(netdev);
-
- rx_csum = bnad->rx_csum;
- return rx_csum;
-}
-
-static int
-bnad_set_rx_csum(struct net_device *netdev, u32 rx_csum)
-{
- struct bnad *bnad = netdev_priv(netdev);
-
- mutex_lock(&bnad->conf_mutex);
- bnad->rx_csum = rx_csum;
- mutex_unlock(&bnad->conf_mutex);
- return 0;
-}
-
-static int
-bnad_set_tx_csum(struct net_device *netdev, u32 tx_csum)
-{
- struct bnad *bnad = netdev_priv(netdev);
-
- mutex_lock(&bnad->conf_mutex);
- if (tx_csum) {
- netdev->features |= NETIF_F_IP_CSUM;
- netdev->features |= NETIF_F_IPV6_CSUM;
- } else {
- netdev->features &= ~NETIF_F_IP_CSUM;
- netdev->features &= ~NETIF_F_IPV6_CSUM;
- }
- mutex_unlock(&bnad->conf_mutex);
- return 0;
-}
-
-static int
-bnad_set_tso(struct net_device *netdev, u32 tso)
-{
- struct bnad *bnad = netdev_priv(netdev);
-
- mutex_lock(&bnad->conf_mutex);
- if (tso) {
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- } else {
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- }
- mutex_unlock(&bnad->conf_mutex);
- return 0;
-}
-
static void
bnad_get_strings(struct net_device *netdev, u32 stringset, u8 * string)
{
@@ -1256,14 +1202,6 @@
.set_ringparam = bnad_set_ringparam,
.get_pauseparam = bnad_get_pauseparam,
.set_pauseparam = bnad_set_pauseparam,
- .get_rx_csum = bnad_get_rx_csum,
- .set_rx_csum = bnad_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = bnad_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = bnad_set_tso,
.get_strings = bnad_get_strings,
.get_ethtool_stats = bnad_get_ethtool_stats,
.get_sset_count = bnad_get_sset_count
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 8e6d618..57d3293 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3174,7 +3174,7 @@
}
skb_checksum_none_assert(skb);
- if (bp->rx_csum &&
+ if ((bp->dev->features & NETIF_F_RXCSUM) &&
(status & (L2_FHDR_STATUS_TCP_SEGMENT |
L2_FHDR_STATUS_UDP_DATAGRAM))) {
@@ -6696,17 +6696,16 @@
if (bp->autoneg & AUTONEG_SPEED) {
cmd->autoneg = AUTONEG_ENABLE;
- }
- else {
+ } else {
cmd->autoneg = AUTONEG_DISABLE;
}
if (netif_carrier_ok(dev)) {
- cmd->speed = bp->line_speed;
+ ethtool_cmd_speed_set(cmd, bp->line_speed);
cmd->duplex = bp->duplex;
}
else {
- cmd->speed = -1;
+ ethtool_cmd_speed_set(cmd, -1);
cmd->duplex = -1;
}
spin_unlock_bh(&bp->phy_lock);
@@ -6758,21 +6757,21 @@
advertising |= ADVERTISED_Autoneg;
}
else {
+ u32 speed = ethtool_cmd_speed(cmd);
if (cmd->port == PORT_FIBRE) {
- if ((cmd->speed != SPEED_1000 &&
- cmd->speed != SPEED_2500) ||
+ if ((speed != SPEED_1000 &&
+ speed != SPEED_2500) ||
(cmd->duplex != DUPLEX_FULL))
goto err_out_unlock;
- if (cmd->speed == SPEED_2500 &&
+ if (speed == SPEED_2500 &&
!(bp->phy_flags & BNX2_PHY_FLAG_2_5G_CAPABLE))
goto err_out_unlock;
- }
- else if (cmd->speed == SPEED_1000 || cmd->speed == SPEED_2500)
+ } else if (speed == SPEED_1000 || speed == SPEED_2500)
goto err_out_unlock;
autoneg &= ~AUTONEG_SPEED;
- req_line_speed = cmd->speed;
+ req_line_speed = speed;
req_duplex = cmd->duplex;
advertising = 0;
}
@@ -7189,38 +7188,6 @@
return 0;
}
-static u32
-bnx2_get_rx_csum(struct net_device *dev)
-{
- struct bnx2 *bp = netdev_priv(dev);
-
- return bp->rx_csum;
-}
-
-static int
-bnx2_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct bnx2 *bp = netdev_priv(dev);
-
- bp->rx_csum = data;
- return 0;
-}
-
-static int
-bnx2_set_tso(struct net_device *dev, u32 data)
-{
- struct bnx2 *bp = netdev_priv(dev);
-
- if (data) {
- dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
- if (CHIP_NUM(bp) == CHIP_NUM_5709)
- dev->features |= NETIF_F_TSO6;
- } else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6 |
- NETIF_F_TSO_ECN);
- return 0;
-}
-
static struct {
char string[ETH_GSTRING_LEN];
} bnx2_stats_str_arr[] = {
@@ -7495,82 +7462,74 @@
}
static int
-bnx2_phys_id(struct net_device *dev, u32 data)
+bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state)
{
struct bnx2 *bp = netdev_priv(dev);
- int i;
- u32 save;
- bnx2_set_power_state(bp, PCI_D0);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ bnx2_set_power_state(bp, PCI_D0);
- if (data == 0)
- data = 2;
+ bp->leds_save = REG_RD(bp, BNX2_MISC_CFG);
+ REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
+ return 1; /* cycle on/off once per second */
- save = REG_RD(bp, BNX2_MISC_CFG);
- REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
+ case ETHTOOL_ID_ON:
+ REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
+ BNX2_EMAC_LED_1000MB_OVERRIDE |
+ BNX2_EMAC_LED_100MB_OVERRIDE |
+ BNX2_EMAC_LED_10MB_OVERRIDE |
+ BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
+ BNX2_EMAC_LED_TRAFFIC);
+ break;
- for (i = 0; i < (data * 2); i++) {
- if ((i % 2) == 0) {
- REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
- }
- else {
- REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
- BNX2_EMAC_LED_1000MB_OVERRIDE |
- BNX2_EMAC_LED_100MB_OVERRIDE |
- BNX2_EMAC_LED_10MB_OVERRIDE |
- BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
- BNX2_EMAC_LED_TRAFFIC);
- }
- msleep_interruptible(500);
- if (signal_pending(current))
- break;
+ case ETHTOOL_ID_OFF:
+ REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ REG_WR(bp, BNX2_EMAC_LED, 0);
+ REG_WR(bp, BNX2_MISC_CFG, bp->leds_save);
+
+ if (!netif_running(dev))
+ bnx2_set_power_state(bp, PCI_D3hot);
+ break;
}
- REG_WR(bp, BNX2_EMAC_LED, 0);
- REG_WR(bp, BNX2_MISC_CFG, save);
-
- if (!netif_running(dev))
- bnx2_set_power_state(bp, PCI_D3hot);
return 0;
}
-static int
-bnx2_set_tx_csum(struct net_device *dev, u32 data)
+static u32
+bnx2_fix_features(struct net_device *dev, u32 features)
{
struct bnx2 *bp = netdev_priv(dev);
- if (CHIP_NUM(bp) == CHIP_NUM_5709)
- return ethtool_op_set_tx_ipv6_csum(dev, data);
- else
- return ethtool_op_set_tx_csum(dev, data);
+ if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
+ features |= NETIF_F_HW_VLAN_RX;
+
+ return features;
}
static int
-bnx2_set_flags(struct net_device *dev, u32 data)
+bnx2_set_features(struct net_device *dev, u32 features)
{
struct bnx2 *bp = netdev_priv(dev);
- int rc;
-
- if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN) &&
- !(data & ETH_FLAG_RXVLAN))
- return -EINVAL;
/* TSO with VLAN tag won't work with current firmware */
- if (!(data & ETH_FLAG_TXVLAN))
- return -EINVAL;
+ if (features & NETIF_F_HW_VLAN_TX)
+ dev->vlan_features |= (dev->hw_features & NETIF_F_ALL_TSO);
+ else
+ dev->vlan_features &= ~NETIF_F_ALL_TSO;
- rc = ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH | ETH_FLAG_RXVLAN |
- ETH_FLAG_TXVLAN);
- if (rc)
- return rc;
-
- if ((!!(data & ETH_FLAG_RXVLAN) !=
+ if ((!!(features & NETIF_F_HW_VLAN_RX) !=
!!(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) &&
netif_running(dev)) {
bnx2_netif_stop(bp, false);
+ dev->features = features;
bnx2_set_rx_mode(dev);
bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
bnx2_netif_start(bp, false);
+ return 1;
}
return 0;
@@ -7595,18 +7554,11 @@
.set_ringparam = bnx2_set_ringparam,
.get_pauseparam = bnx2_get_pauseparam,
.set_pauseparam = bnx2_set_pauseparam,
- .get_rx_csum = bnx2_get_rx_csum,
- .set_rx_csum = bnx2_set_rx_csum,
- .set_tx_csum = bnx2_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = bnx2_set_tso,
.self_test = bnx2_self_test,
.get_strings = bnx2_get_strings,
- .phys_id = bnx2_phys_id,
+ .set_phys_id = bnx2_set_phys_id,
.get_ethtool_stats = bnx2_get_ethtool_stats,
.get_sset_count = bnx2_get_sset_count,
- .set_flags = bnx2_set_flags,
- .get_flags = ethtool_op_get_flags,
};
/* Called with rtnl_lock */
@@ -8118,8 +8070,6 @@
bp->tx_ring_size = MAX_TX_DESC_CNT;
bnx2_set_rx_ring_size(bp, 255);
- bp->rx_csum = 1;
-
bp->tx_quick_cons_trip_int = 2;
bp->tx_quick_cons_trip = 20;
bp->tx_ticks_int = 18;
@@ -8311,17 +8261,14 @@
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = bnx2_change_mac_addr,
.ndo_change_mtu = bnx2_change_mtu,
+ .ndo_fix_features = bnx2_fix_features,
+ .ndo_set_features = bnx2_set_features,
.ndo_tx_timeout = bnx2_tx_timeout,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = poll_bnx2,
#endif
};
-static inline void vlan_features_add(struct net_device *dev, u32 flags)
-{
- dev->vlan_features |= flags;
-}
-
static int __devinit
bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -8361,20 +8308,17 @@
memcpy(dev->dev_addr, bp->mac_addr, 6);
memcpy(dev->perm_addr, bp->mac_addr, 6);
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_GRO |
- NETIF_F_RXHASH;
- vlan_features_add(dev, NETIF_F_IP_CSUM | NETIF_F_SG);
- if (CHIP_NUM(bp) == CHIP_NUM_5709) {
- dev->features |= NETIF_F_IPV6_CSUM;
- vlan_features_add(dev, NETIF_F_IPV6_CSUM);
- }
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
- vlan_features_add(dev, NETIF_F_TSO | NETIF_F_TSO_ECN);
- if (CHIP_NUM(bp) == CHIP_NUM_5709) {
- dev->features |= NETIF_F_TSO6;
- vlan_features_add(dev, NETIF_F_TSO6);
- }
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_TSO_ECN |
+ NETIF_F_RXHASH | NETIF_F_RXCSUM;
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ dev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+ dev->vlan_features = dev->hw_features;
+ dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->features |= dev->hw_features;
+
if ((rc = register_netdev(dev))) {
dev_err(&pdev->dev, "Cannot register net device\n");
goto error;
@@ -8413,6 +8357,8 @@
unregister_netdev(dev);
+ del_timer_sync(&bp->timer);
+
if (bp->mips_firmware)
release_firmware(bp->mips_firmware);
if (bp->rv2p_firmware)
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 6802045..bf371f6 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6754,8 +6754,6 @@
u32 rx_max_ring_idx;
u32 rx_max_pg_ring_idx;
- u32 rx_csum;
-
/* TX constants */
int tx_ring_size;
u32 tx_wake_thresh;
@@ -6922,6 +6920,7 @@
u8 num_tx_rings;
u8 num_rx_rings;
+ u32 leds_save;
u32 idle_chk_status_idx;
#ifdef BCM_CNIC
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index e0fca70..668a578 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1,6 +1,6 @@
/* bnx2x.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,8 +22,8 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.62.11-0"
-#define DRV_MODULE_RELDATE "2011/01/31"
+#define DRV_MODULE_VERSION "1.62.12-0"
+#define DRV_MODULE_RELDATE "2011/03/20"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
@@ -473,7 +473,8 @@
#define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS)
#define MAX_RX_BD (NUM_RX_BD - 1)
#define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
-#define MIN_RX_AVAIL 128
+#define MIN_RX_SIZE_TPA 72
+#define MIN_RX_SIZE_NONTPA 10
#define INIT_JUMBO_RX_RING_SIZE MAX_RX_AVAIL
#define INIT_RX_RING_SIZE MAX_RX_AVAIL
#define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \
@@ -893,6 +894,22 @@
(&bp->def_status_blk->sp_sb.\
index_values[HC_SP_INDEX_EQ_CONS])
+/* This is a data that will be used to create a link report message.
+ * We will keep the data used for the last link report in order
+ * to prevent reporting the same link parameters twice.
+ */
+struct bnx2x_link_report_data {
+ u16 line_speed; /* Effective line speed */
+ unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */
+};
+
+enum {
+ BNX2X_LINK_REPORT_FD, /* Full DUPLEX */
+ BNX2X_LINK_REPORT_LINK_DOWN,
+ BNX2X_LINK_REPORT_RX_FC_ON,
+ BNX2X_LINK_REPORT_TX_FC_ON,
+};
+
struct bnx2x {
/* Fields used in the tx and intr/napi performance paths
* are grouped together in the beginning of the structure
@@ -918,7 +935,6 @@
int tx_ring_size;
- u32 rx_csum;
/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
#define ETH_OVREHEAD (ETH_HLEN + 8 + 8)
#define ETH_MIN_PACKET_SIZE 60
@@ -1026,6 +1042,9 @@
struct link_params link_params;
struct link_vars link_vars;
+ u32 link_cnt;
+ struct bnx2x_link_report_data last_reported_link;
+
struct mdio_if_info mdio;
struct bnx2x_common common;
@@ -1223,6 +1242,10 @@
/* DCBX Negotiation results */
struct dcbx_features dcbx_local_feat;
u32 dcbx_error;
+#ifdef BCM_DCBNL
+ struct dcbx_features dcbx_remote_feat;
+ u32 dcbx_remote_flags;
+#endif
u32 pending_max;
};
@@ -1442,6 +1465,8 @@
#define WAIT_RAMROD_POLL 0x01
#define WAIT_RAMROD_COMMON 0x02
+void bnx2x_read_mf_cfg(struct bnx2x *bp);
+
/* dmae */
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index e83ac6d..ca2bbc0 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1,6 +1,6 @@
/* bnx2x_cmn.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -27,6 +27,49 @@
static int bnx2x_setup_irqs(struct bnx2x *bp);
+/**
+ * bnx2x_bz_fp - zero content of the fastpath structure.
+ *
+ * @bp: driver handle
+ * @index: fastpath index to be zeroed
+ *
+ * Makes sure the contents of the bp->fp[index].napi is kept
+ * intact.
+ */
+static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
+{
+ struct bnx2x_fastpath *fp = &bp->fp[index];
+ struct napi_struct orig_napi = fp->napi;
+ /* bzero bnx2x_fastpath contents */
+ memset(fp, 0, sizeof(*fp));
+
+ /* Restore the NAPI object as it has been already initialized */
+ fp->napi = orig_napi;
+}
+
+/**
+ * bnx2x_move_fp - move content of the fastpath structure.
+ *
+ * @bp: driver handle
+ * @from: source FP index
+ * @to: destination FP index
+ *
+ * Makes sure the contents of the bp->fp[to].napi is kept
+ * intact.
+ */
+static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to)
+{
+ struct bnx2x_fastpath *from_fp = &bp->fp[from];
+ struct bnx2x_fastpath *to_fp = &bp->fp[to];
+ struct napi_struct orig_napi = to_fp->napi;
+ /* Move bnx2x_fastpath contents */
+ memcpy(to_fp, from_fp, sizeof(*to_fp));
+ to_fp->index = to;
+
+ /* Restore the NAPI object as it has been already initialized */
+ to_fp->napi = orig_napi;
+}
+
/* free skb in the packet ring at pos idx
* return idx of last bd freed
*/
@@ -265,13 +308,15 @@
*/
#define TPA_TSTAMP_OPT_LEN 12
/**
- * Calculate the approximate value of the MSS for this
- * aggregation using the first packet of it.
+ * bnx2x_set_lro_mss - calculate the approximate value of the MSS
*
- * @param bp
- * @param parsing_flags Parsing flags from the START CQE
- * @param len_on_bd Total length of the first packet for the
- * aggregation.
+ * @bp: driver handle
+ * @parsing_flags: parsing flags from the START CQE
+ * @len_on_bd: total length of the first packet for the
+ * aggregation.
+ *
+ * Approximate value of the MSS for this aggregation calculated using
+ * the first packet of it.
*/
static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
u16 len_on_bd)
@@ -640,7 +685,7 @@
skb_checksum_none_assert(skb);
- if (bp->rx_csum) {
+ if (bp->dev->features & NETIF_F_RXCSUM) {
if (likely(BNX2X_RX_CSUM_OK(cqe)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
@@ -758,35 +803,119 @@
return line_speed;
}
+/**
+ * bnx2x_fill_report_data - fill link report data to report
+ *
+ * @bp: driver handle
+ * @data: link state to update
+ *
+ * It uses a none-atomic bit operations because is called under the mutex.
+ */
+static inline void bnx2x_fill_report_data(struct bnx2x *bp,
+ struct bnx2x_link_report_data *data)
+{
+ u16 line_speed = bnx2x_get_mf_speed(bp);
+
+ memset(data, 0, sizeof(*data));
+
+ /* Fill the report data: efective line speed */
+ data->line_speed = line_speed;
+
+ /* Link is down */
+ if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
+ __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &data->link_report_flags);
+
+ /* Full DUPLEX */
+ if (bp->link_vars.duplex == DUPLEX_FULL)
+ __set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
+
+ /* Rx Flow Control is ON */
+ if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
+ __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
+
+ /* Tx Flow Control is ON */
+ if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
+ __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+}
+
+/**
+ * bnx2x_link_report - report link status to OS.
+ *
+ * @bp: driver handle
+ *
+ * Calls the __bnx2x_link_report() under the same locking scheme
+ * as a link/PHY state managing code to ensure a consistent link
+ * reporting.
+ */
+
void bnx2x_link_report(struct bnx2x *bp)
{
- if (bp->flags & MF_FUNC_DIS) {
+ bnx2x_acquire_phy_lock(bp);
+ __bnx2x_link_report(bp);
+ bnx2x_release_phy_lock(bp);
+}
+
+/**
+ * __bnx2x_link_report - report link status to OS.
+ *
+ * @bp: driver handle
+ *
+ * None atomic inmlementation.
+ * Should be called under the phy_lock.
+ */
+void __bnx2x_link_report(struct bnx2x *bp)
+{
+ struct bnx2x_link_report_data cur_data;
+
+ /* reread mf_cfg */
+ if (!CHIP_IS_E1(bp))
+ bnx2x_read_mf_cfg(bp);
+
+ /* Read the current link report info */
+ bnx2x_fill_report_data(bp, &cur_data);
+
+ /* Don't report link down or exactly the same link status twice */
+ if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
+ (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &bp->last_reported_link.link_report_flags) &&
+ test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &cur_data.link_report_flags)))
+ return;
+
+ bp->link_cnt++;
+
+ /* We are going to report a new link parameters now -
+ * remember the current data for the next time.
+ */
+ memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
+
+ if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &cur_data.link_report_flags)) {
netif_carrier_off(bp->dev);
netdev_err(bp->dev, "NIC Link is Down\n");
return;
- }
-
- if (bp->link_vars.link_up) {
- u16 line_speed;
-
- if (bp->state == BNX2X_STATE_OPEN)
- netif_carrier_on(bp->dev);
+ } else {
+ netif_carrier_on(bp->dev);
netdev_info(bp->dev, "NIC Link is Up, ");
+ pr_cont("%d Mbps ", cur_data.line_speed);
- line_speed = bnx2x_get_mf_speed(bp);
-
- pr_cont("%d Mbps ", line_speed);
-
- if (bp->link_vars.duplex == DUPLEX_FULL)
+ if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
+ &cur_data.link_report_flags))
pr_cont("full duplex");
else
pr_cont("half duplex");
- if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
- if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
+ /* Handle the FC at the end so that only these flags would be
+ * possibly set. This way we may easily check if there is no FC
+ * enabled.
+ */
+ if (cur_data.link_report_flags) {
+ if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ &cur_data.link_report_flags)) {
pr_cont(", receive ");
- if (bp->link_vars.flow_ctrl &
- BNX2X_FLOW_CTRL_TX)
+ if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ &cur_data.link_report_flags))
pr_cont("& transmit ");
} else {
pr_cont(", transmit ");
@@ -794,62 +923,9 @@
pr_cont("flow control ON");
}
pr_cont("\n");
-
- } else { /* link_down */
- netif_carrier_off(bp->dev);
- netdev_err(bp->dev, "NIC Link is Down\n");
}
}
-/* Returns the number of actually allocated BDs */
-static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
- int rx_ring_size)
-{
- struct bnx2x *bp = fp->bp;
- u16 ring_prod, cqe_ring_prod;
- int i;
-
- fp->rx_comp_cons = 0;
- cqe_ring_prod = ring_prod = 0;
- for (i = 0; i < rx_ring_size; i++) {
- if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
- BNX2X_ERR("was only able to allocate "
- "%d rx skbs on queue[%d]\n", i, fp->index);
- fp->eth_q_stats.rx_skb_alloc_failed++;
- break;
- }
- ring_prod = NEXT_RX_IDX(ring_prod);
- cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
- WARN_ON(ring_prod <= i);
- }
-
- fp->rx_bd_prod = ring_prod;
- /* Limit the CQE producer by the CQE ring size */
- fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT,
- cqe_ring_prod);
- fp->rx_pkt = fp->rx_calls = 0;
-
- return i;
-}
-
-static inline void bnx2x_alloc_rx_bd_ring(struct bnx2x_fastpath *fp)
-{
- struct bnx2x *bp = fp->bp;
- int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
- MAX_RX_AVAIL/bp->num_queues;
-
- rx_ring_size = max_t(int, MIN_RX_AVAIL, rx_ring_size);
-
- bnx2x_alloc_rx_bds(fp, rx_ring_size);
-
- /* Warning!
- * this will generate an interrupt (to the TSTORM)
- * must only be done after chip is initialized
- */
- bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
- fp->rx_sge_prod);
-}
-
void bnx2x_init_rx_rings(struct bnx2x *bp)
{
int func = BP_FUNC(bp);
@@ -858,6 +934,7 @@
u16 ring_prod;
int i, j;
+ /* Allocate TPA resources */
for_each_rx_queue(bp, j) {
struct bnx2x_fastpath *fp = &bp->fp[j];
@@ -865,6 +942,7 @@
"mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
if (!fp->disable_tpa) {
+ /* Fill the per-aggregation pool */
for (i = 0; i < max_agg_queues; i++) {
fp->tpa_pool[i].skb =
netdev_alloc_skb(bp->dev, fp->rx_buf_size);
@@ -919,13 +997,13 @@
fp->rx_bd_cons = 0;
- bnx2x_set_next_page_rx_bd(fp);
-
- /* CQ ring */
- bnx2x_set_next_page_rx_cq(fp);
-
- /* Allocate BDs and initialize BD ring */
- bnx2x_alloc_rx_bd_ring(fp);
+ /* Activate BD ring */
+ /* Warning!
+ * this will generate an interrupt (to the TSTORM)
+ * must only be done after chip is initialized
+ */
+ bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
+ fp->rx_sge_prod);
if (j != 0)
continue;
@@ -959,27 +1037,40 @@
}
}
+static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
+{
+ struct bnx2x *bp = fp->bp;
+ int i;
+
+ /* ring wasn't allocated */
+ if (fp->rx_buf_ring == NULL)
+ return;
+
+ for (i = 0; i < NUM_RX_BD; i++) {
+ struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
+ struct sk_buff *skb = rx_buf->skb;
+
+ if (skb == NULL)
+ continue;
+
+ dma_unmap_single(&bp->pdev->dev,
+ dma_unmap_addr(rx_buf, mapping),
+ fp->rx_buf_size, DMA_FROM_DEVICE);
+
+ rx_buf->skb = NULL;
+ dev_kfree_skb(skb);
+ }
+}
+
static void bnx2x_free_rx_skbs(struct bnx2x *bp)
{
- int i, j;
+ int j;
for_each_rx_queue(bp, j) {
struct bnx2x_fastpath *fp = &bp->fp[j];
- for (i = 0; i < NUM_RX_BD; i++) {
- struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
- struct sk_buff *skb = rx_buf->skb;
+ bnx2x_free_rx_bds(fp);
- if (skb == NULL)
- continue;
-
- dma_unmap_single(&bp->pdev->dev,
- dma_unmap_addr(rx_buf, mapping),
- fp->rx_buf_size, DMA_FROM_DEVICE);
-
- rx_buf->skb = NULL;
- dev_kfree_skb(skb);
- }
if (!fp->disable_tpa)
bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
ETH_MAX_AGGREGATION_QUEUES_E1 :
@@ -1345,21 +1436,25 @@
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
+ /* Set the initial link reported state to link down */
+ bnx2x_acquire_phy_lock(bp);
+ memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
+ __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &bp->last_reported_link.link_report_flags);
+ bnx2x_release_phy_lock(bp);
+
/* must be called before memory allocation and HW init */
bnx2x_ilt_set_info(bp);
+ /* zero fastpath structures preserving invariants like napi which are
+ * allocated only once
+ */
+ for_each_queue(bp, i)
+ bnx2x_bz_fp(bp, i);
+
/* Set the receive queues buffer size */
bnx2x_set_rx_buf_size(bp);
- if (bnx2x_alloc_mem(bp))
- return -ENOMEM;
-
- rc = bnx2x_set_real_num_queues(bp);
- if (rc) {
- BNX2X_ERR("Unable to set real_num_queues\n");
- goto load_error0;
- }
-
for_each_queue(bp, i)
bnx2x_fp(bp, i, disable_tpa) =
((bp->flags & TPA_ENABLE_FLAG) == 0);
@@ -1368,6 +1463,20 @@
/* We don't want TPA on FCoE L2 ring */
bnx2x_fcoe(bp, disable_tpa) = 1;
#endif
+
+ if (bnx2x_alloc_mem(bp))
+ return -ENOMEM;
+
+ /* As long as bnx2x_alloc_mem() may possibly update
+ * bp->num_queues, bnx2x_set_real_num_queues() should always
+ * come after it.
+ */
+ rc = bnx2x_set_real_num_queues(bp);
+ if (rc) {
+ BNX2X_ERR("Unable to set real_num_queues\n");
+ goto load_error0;
+ }
+
bnx2x_napi_enable(bp);
/* Send LOAD_REQUEST command to MCP
@@ -1976,12 +2085,11 @@
}
/**
- * Update PBD in GSO case.
+ * bnx2x_set_pbd_gso - update PBD in GSO case.
*
- * @param skb
- * @param tx_start_bd
- * @param pbd
- * @param xmit_type
+ * @skb: packet skb
+ * @pbd: parse BD
+ * @xmit_type: xmit flags
*/
static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
struct eth_tx_parse_bd_e1x *pbd,
@@ -2008,42 +2116,50 @@
}
/**
+ * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length
*
- * @param skb
- * @param tx_start_bd
- * @param pbd_e2
- * @param xmit_type
+ * @bp: driver handle
+ * @skb: packet skb
+ * @parsing_data: data to be updated
+ * @xmit_type: xmit flags
*
- * @return header len
+ * 57712 related
*/
static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
u32 *parsing_data, u32 xmit_type)
{
- *parsing_data |= ((tcp_hdrlen(skb)/4) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
- ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
+ *parsing_data |=
+ ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
- *parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
- ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
+ if (xmit_type & XMIT_CSUM_TCP) {
+ *parsing_data |= ((tcp_hdrlen(skb) / 4) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
- return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
+ return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
+ } else
+ /* We support checksum offload for TCP and UDP only.
+ * No need to pass the UDP header length - it's a constant.
+ */
+ return skb_transport_header(skb) +
+ sizeof(struct udphdr) - skb->data;
}
/**
+ * bnx2x_set_pbd_csum - update PBD with checksum and return header length
*
- * @param skb
- * @param tx_start_bd
- * @param pbd
- * @param xmit_type
- *
- * @return Header length
+ * @bp: driver handle
+ * @skb: packet skb
+ * @pbd: parse BD to be updated
+ * @xmit_type: xmit flags
*/
static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
struct eth_tx_parse_bd_e1x *pbd,
u32 xmit_type)
{
- u8 hlen = (skb_network_header(skb) - skb->data) / 2;
+ u8 hlen = (skb_network_header(skb) - skb->data) >> 1;
/* for now NS flag is not used in Linux */
pbd->global_data =
@@ -2051,9 +2167,15 @@
ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
pbd->ip_hlen_w = (skb_transport_header(skb) -
- skb_network_header(skb)) / 2;
+ skb_network_header(skb)) >> 1;
- hlen += pbd->ip_hlen_w + tcp_hdrlen(skb) / 2;
+ hlen += pbd->ip_hlen_w;
+
+ /* We support checksum offload for TCP and UDP only */
+ if (xmit_type & XMIT_CSUM_TCP)
+ hlen += tcp_hdrlen(skb) / 2;
+ else
+ hlen += sizeof(struct udphdr) / 2;
pbd->total_hlen_w = cpu_to_le16(hlen);
hlen = hlen*2;
@@ -2379,6 +2501,232 @@
return 0;
}
+static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
+{
+ union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk);
+ struct bnx2x_fastpath *fp = &bp->fp[fp_index];
+
+ /* Common */
+#ifdef BCM_CNIC
+ if (IS_FCOE_IDX(fp_index)) {
+ memset(sb, 0, sizeof(union host_hc_status_block));
+ fp->status_blk_mapping = 0;
+
+ } else {
+#endif
+ /* status blocks */
+ if (CHIP_IS_E2(bp))
+ BNX2X_PCI_FREE(sb->e2_sb,
+ bnx2x_fp(bp, fp_index,
+ status_blk_mapping),
+ sizeof(struct host_hc_status_block_e2));
+ else
+ BNX2X_PCI_FREE(sb->e1x_sb,
+ bnx2x_fp(bp, fp_index,
+ status_blk_mapping),
+ sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+ }
+#endif
+ /* Rx */
+ if (!skip_rx_queue(bp, fp_index)) {
+ bnx2x_free_rx_bds(fp);
+
+ /* fastpath rx rings: rx_buf rx_desc rx_comp */
+ BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring));
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring),
+ bnx2x_fp(bp, fp_index, rx_desc_mapping),
+ sizeof(struct eth_rx_bd) * NUM_RX_BD);
+
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring),
+ bnx2x_fp(bp, fp_index, rx_comp_mapping),
+ sizeof(struct eth_fast_path_rx_cqe) *
+ NUM_RCQ_BD);
+
+ /* SGE ring */
+ BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring));
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring),
+ bnx2x_fp(bp, fp_index, rx_sge_mapping),
+ BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+ }
+
+ /* Tx */
+ if (!skip_tx_queue(bp, fp_index)) {
+ /* fastpath tx rings: tx_buf tx_desc */
+ BNX2X_FREE(bnx2x_fp(bp, fp_index, tx_buf_ring));
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, tx_desc_ring),
+ bnx2x_fp(bp, fp_index, tx_desc_mapping),
+ sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+ }
+ /* end of fastpath */
+}
+
+void bnx2x_free_fp_mem(struct bnx2x *bp)
+{
+ int i;
+ for_each_queue(bp, i)
+ bnx2x_free_fp_mem_at(bp, i);
+}
+
+static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
+{
+ union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
+ if (CHIP_IS_E2(bp)) {
+ bnx2x_fp(bp, index, sb_index_values) =
+ (__le16 *)status_blk.e2_sb->sb.index_values;
+ bnx2x_fp(bp, index, sb_running_index) =
+ (__le16 *)status_blk.e2_sb->sb.running_index;
+ } else {
+ bnx2x_fp(bp, index, sb_index_values) =
+ (__le16 *)status_blk.e1x_sb->sb.index_values;
+ bnx2x_fp(bp, index, sb_running_index) =
+ (__le16 *)status_blk.e1x_sb->sb.running_index;
+ }
+}
+
+static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
+{
+ union host_hc_status_block *sb;
+ struct bnx2x_fastpath *fp = &bp->fp[index];
+ int ring_size = 0;
+
+ /* if rx_ring_size specified - use it */
+ int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
+ MAX_RX_AVAIL/bp->num_queues;
+
+ /* allocate at least number of buffers required by FW */
+ rx_ring_size = max_t(int, fp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+ MIN_RX_SIZE_TPA,
+ rx_ring_size);
+
+ bnx2x_fp(bp, index, bp) = bp;
+ bnx2x_fp(bp, index, index) = index;
+
+ /* Common */
+ sb = &bnx2x_fp(bp, index, status_blk);
+#ifdef BCM_CNIC
+ if (!IS_FCOE_IDX(index)) {
+#endif
+ /* status blocks */
+ if (CHIP_IS_E2(bp))
+ BNX2X_PCI_ALLOC(sb->e2_sb,
+ &bnx2x_fp(bp, index, status_blk_mapping),
+ sizeof(struct host_hc_status_block_e2));
+ else
+ BNX2X_PCI_ALLOC(sb->e1x_sb,
+ &bnx2x_fp(bp, index, status_blk_mapping),
+ sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+ }
+#endif
+ set_sb_shortcuts(bp, index);
+
+ /* Tx */
+ if (!skip_tx_queue(bp, index)) {
+ /* fastpath tx rings: tx_buf tx_desc */
+ BNX2X_ALLOC(bnx2x_fp(bp, index, tx_buf_ring),
+ sizeof(struct sw_tx_bd) * NUM_TX_BD);
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, tx_desc_ring),
+ &bnx2x_fp(bp, index, tx_desc_mapping),
+ sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+ }
+
+ /* Rx */
+ if (!skip_rx_queue(bp, index)) {
+ /* fastpath rx rings: rx_buf rx_desc rx_comp */
+ BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
+ sizeof(struct sw_rx_bd) * NUM_RX_BD);
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
+ &bnx2x_fp(bp, index, rx_desc_mapping),
+ sizeof(struct eth_rx_bd) * NUM_RX_BD);
+
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring),
+ &bnx2x_fp(bp, index, rx_comp_mapping),
+ sizeof(struct eth_fast_path_rx_cqe) *
+ NUM_RCQ_BD);
+
+ /* SGE ring */
+ BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
+ sizeof(struct sw_rx_page) * NUM_RX_SGE);
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
+ &bnx2x_fp(bp, index, rx_sge_mapping),
+ BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+ /* RX BD ring */
+ bnx2x_set_next_page_rx_bd(fp);
+
+ /* CQ ring */
+ bnx2x_set_next_page_rx_cq(fp);
+
+ /* BDs */
+ ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size);
+ if (ring_size < rx_ring_size)
+ goto alloc_mem_err;
+ }
+
+ return 0;
+
+/* handles low memory cases */
+alloc_mem_err:
+ BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",
+ index, ring_size);
+ /* FW will drop all packets if queue is not big enough,
+ * In these cases we disable the queue
+ * Min size diferent for TPA and non-TPA queues
+ */
+ if (ring_size < (fp->disable_tpa ?
+ MIN_RX_SIZE_TPA : MIN_RX_SIZE_NONTPA)) {
+ /* release memory allocated for this queue */
+ bnx2x_free_fp_mem_at(bp, index);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+int bnx2x_alloc_fp_mem(struct bnx2x *bp)
+{
+ int i;
+
+ /**
+ * 1. Allocate FP for leading - fatal if error
+ * 2. {CNIC} Allocate FCoE FP - fatal if error
+ * 3. Allocate RSS - fix number of queues if error
+ */
+
+ /* leading */
+ if (bnx2x_alloc_fp_mem_at(bp, 0))
+ return -ENOMEM;
+#ifdef BCM_CNIC
+ /* FCoE */
+ if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX))
+ return -ENOMEM;
+#endif
+ /* RSS */
+ for_each_nondefault_eth_queue(bp, i)
+ if (bnx2x_alloc_fp_mem_at(bp, i))
+ break;
+
+ /* handle memory failures */
+ if (i != BNX2X_NUM_ETH_QUEUES(bp)) {
+ int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
+
+ WARN_ON(delta < 0);
+#ifdef BCM_CNIC
+ /**
+ * move non eth FPs next to last eth FP
+ * must be done in that order
+ * FCOE_IDX < FWD_IDX < OOO_IDX
+ */
+
+ /* move FCoE fp */
+ bnx2x_move_fp(bp, FCOE_IDX, FCOE_IDX - delta);
+#endif
+ bp->num_queues -= delta;
+ BNX2X_ERR("Adjusted num of queues from %d to %d\n",
+ bp->num_queues + delta, bp->num_queues);
+ }
+
+ return 0;
+}
static int bnx2x_setup_irqs(struct bnx2x *bp)
{
@@ -2443,11 +2791,21 @@
}
+static int bnx2x_reload_if_running(struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ if (unlikely(!netif_running(dev)))
+ return 0;
+
+ bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+ return bnx2x_nic_load(bp, LOAD_NORMAL);
+}
+
/* called with rtnl_lock */
int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
{
struct bnx2x *bp = netdev_priv(dev);
- int rc = 0;
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
printk(KERN_ERR "Handling parity error recovery. Try again later\n");
@@ -2464,12 +2822,55 @@
*/
dev->mtu = new_mtu;
- if (netif_running(dev)) {
- bnx2x_nic_unload(bp, UNLOAD_NORMAL);
- rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+ return bnx2x_reload_if_running(dev);
+}
+
+u32 bnx2x_fix_features(struct net_device *dev, u32 features)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ /* TPA requires Rx CSUM offloading */
+ if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa)
+ features &= ~NETIF_F_LRO;
+
+ return features;
+}
+
+int bnx2x_set_features(struct net_device *dev, u32 features)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+ u32 flags = bp->flags;
+ bool bnx2x_reload = false;
+
+ if (features & NETIF_F_LRO)
+ flags |= TPA_ENABLE_FLAG;
+ else
+ flags &= ~TPA_ENABLE_FLAG;
+
+ if (features & NETIF_F_LOOPBACK) {
+ if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
+ bp->link_params.loopback_mode = LOOPBACK_BMAC;
+ bnx2x_reload = true;
+ }
+ } else {
+ if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
+ bp->link_params.loopback_mode = LOOPBACK_NONE;
+ bnx2x_reload = true;
+ }
}
- return rc;
+ if (flags ^ bp->flags) {
+ bp->flags = flags;
+ bnx2x_reload = true;
+ }
+
+ if (bnx2x_reload) {
+ if (bp->recovery_state == BNX2X_RECOVERY_DONE)
+ return bnx2x_reload_if_running(dev);
+ /* else: bnx2x_nic_load() will be called at end of recovery */
+ }
+
+ return 0;
}
void bnx2x_tx_timeout(struct net_device *dev)
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index ef37b98..fab161e 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -1,6 +1,6 @@
/* bnx2x_cmn.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,260 +25,277 @@
extern int num_queues;
+/************************ Macros ********************************/
+#define BNX2X_PCI_FREE(x, y, size) \
+ do { \
+ if (x) { \
+ dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \
+ x = NULL; \
+ y = 0; \
+ } \
+ } while (0)
+
+#define BNX2X_FREE(x) \
+ do { \
+ if (x) { \
+ kfree((void *)x); \
+ x = NULL; \
+ } \
+ } while (0)
+
+#define BNX2X_PCI_ALLOC(x, y, size) \
+ do { \
+ x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
+ if (x == NULL) \
+ goto alloc_mem_err; \
+ memset((void *)x, 0, size); \
+ } while (0)
+
+#define BNX2X_ALLOC(x, size) \
+ do { \
+ x = kzalloc(size, GFP_KERNEL); \
+ if (x == NULL) \
+ goto alloc_mem_err; \
+ } while (0)
+
/*********************** Interfaces ****************************
* Functions that need to be implemented by each driver version
*/
/**
- * Initialize link parameters structure variables.
+ * bnx2x_initial_phy_init - initialize link parameters structure variables.
*
- * @param bp
- * @param load_mode
- *
- * @return u8
+ * @bp: driver handle
+ * @load_mode: current mode
*/
u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode);
/**
- * Configure hw according to link parameters structure.
+ * bnx2x_link_set - configure hw according to link parameters structure.
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x_link_set(struct bnx2x *bp);
/**
- * Query link status
+ * bnx2x_link_test - query link status.
*
- * @param bp
- * @param is_serdes
+ * @bp: driver handle
+ * @is_serdes: bool
*
- * @return 0 - link is UP
+ * Returns 0 if link is UP.
*/
u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes);
/**
- * Handles link status change
+ * bnx2x__link_status_update - handles link status change.
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x__link_status_update(struct bnx2x *bp);
/**
- * Report link status to upper layer
+ * bnx2x_link_report - report link status to upper layer.
*
- * @param bp
- *
- * @return int
+ * @bp: driver handle
*/
void bnx2x_link_report(struct bnx2x *bp);
+/* None-atomic version of bnx2x_link_report() */
+void __bnx2x_link_report(struct bnx2x *bp);
+
/**
- * calculates MF speed according to current linespeed and MF
- * configuration
+ * bnx2x_get_mf_speed - calculate MF speed.
*
- * @param bp
+ * @bp: driver handle
*
- * @return u16
+ * Takes into account current linespeed and MF configuration.
*/
u16 bnx2x_get_mf_speed(struct bnx2x *bp);
/**
- * MSI-X slowpath interrupt handler
+ * bnx2x_msix_sp_int - MSI-X slowpath interrupt handler
*
- * @param irq
- * @param dev_instance
- *
- * @return irqreturn_t
+ * @irq: irq number
+ * @dev_instance: private instance
*/
irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance);
/**
- * non MSI-X interrupt handler
+ * bnx2x_interrupt - non MSI-X interrupt handler
*
- * @param irq
- * @param dev_instance
- *
- * @return irqreturn_t
+ * @irq: irq number
+ * @dev_instance: private instance
*/
irqreturn_t bnx2x_interrupt(int irq, void *dev_instance);
#ifdef BCM_CNIC
/**
- * Send command to cnic driver
+ * bnx2x_cnic_notify - send command to cnic driver
*
- * @param bp
- * @param cmd
+ * @bp: driver handle
+ * @cmd: command
*/
int bnx2x_cnic_notify(struct bnx2x *bp, int cmd);
/**
- * Provides cnic information for proper interrupt handling
+ * bnx2x_setup_cnic_irq_info - provides cnic with IRQ information
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
#endif
/**
- * Enable HW interrupts.
+ * bnx2x_int_enable - enable HW interrupts.
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x_int_enable(struct bnx2x *bp);
/**
- * Disable interrupts. This function ensures that there are no
- * ISRs or SP DPCs (sp_task) are running after it returns.
+ * bnx2x_int_disable_sync - disable interrupts.
*
- * @param bp
- * @param disable_hw if true, disable HW interrupts.
+ * @bp: driver handle
+ * @disable_hw: true, disable HW interrupts.
+ *
+ * This function ensures that there are no
+ * ISRs or SP DPCs (sp_task) are running after it returns.
*/
void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw);
/**
- * Loads device firmware
+ * bnx2x_init_firmware - loads device firmware
*
- * @param bp
- *
- * @return int
+ * @bp: driver handle
*/
int bnx2x_init_firmware(struct bnx2x *bp);
/**
- * Init HW blocks according to current initialization stage:
- * COMMON, PORT or FUNCTION.
+ * bnx2x_init_hw - init HW blocks according to current initialization stage.
*
- * @param bp
- * @param load_code: COMMON, PORT or FUNCTION
- *
- * @return int
+ * @bp: driver handle
+ * @load_code: COMMON, PORT or FUNCTION
*/
int bnx2x_init_hw(struct bnx2x *bp, u32 load_code);
/**
- * Init driver internals:
+ * bnx2x_nic_init - init driver internals.
+ *
+ * @bp: driver handle
+ * @load_code: COMMON, PORT or FUNCTION
+ *
+ * Initializes:
* - rings
* - status blocks
* - etc.
- *
- * @param bp
- * @param load_code COMMON, PORT or FUNCTION
*/
void bnx2x_nic_init(struct bnx2x *bp, u32 load_code);
/**
- * Allocate driver's memory.
+ * bnx2x_alloc_mem - allocate driver's memory.
*
- * @param bp
- *
- * @return int
+ * @bp: driver handle
*/
int bnx2x_alloc_mem(struct bnx2x *bp);
/**
- * Release driver's memory.
+ * bnx2x_free_mem - release driver's memory.
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x_free_mem(struct bnx2x *bp);
/**
- * Setup eth Client.
+ * bnx2x_setup_client - setup eth client.
*
- * @param bp
- * @param fp
- * @param is_leading
- *
- * @return int
+ * @bp: driver handle
+ * @fp: pointer to fastpath structure
+ * @is_leading: boolean
*/
int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp,
int is_leading);
/**
- * Set number of queues according to mode
+ * bnx2x_set_num_queues - set number of queues according to mode.
*
- * @param bp
- *
+ * @bp: driver handle
*/
void bnx2x_set_num_queues(struct bnx2x *bp);
/**
- * Cleanup chip internals:
- * - Cleanup MAC configuration.
- * - Close clients.
- * - etc.
+ * bnx2x_chip_cleanup - cleanup chip internals.
*
- * @param bp
- * @param unload_mode
+ * @bp: driver handle
+ * @unload_mode: COMMON, PORT, FUNCTION
+ *
+ * - Cleanup MAC configuration.
+ * - Closes clients.
+ * - etc.
*/
void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode);
/**
- * Acquire HW lock.
+ * bnx2x_acquire_hw_lock - acquire HW lock.
*
- * @param bp
- * @param resource Resource bit which was locked
- *
- * @return int
+ * @bp: driver handle
+ * @resource: resource bit which was locked
*/
int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource);
/**
- * Release HW lock.
+ * bnx2x_release_hw_lock - release HW lock.
*
- * @param bp driver handle
- * @param resource Resource bit which was locked
- *
- * @return int
+ * @bp: driver handle
+ * @resource: resource bit which was locked
*/
int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource);
/**
- * Configure eth MAC address in the HW according to the value in
- * netdev->dev_addr.
+ * bnx2x_set_eth_mac - configure eth MAC address in the HW
*
- * @param bp driver handle
- * @param set
+ * @bp: driver handle
+ * @set: set or clear
+ *
+ * Configures according to the value in netdev->dev_addr.
*/
void bnx2x_set_eth_mac(struct bnx2x *bp, int set);
#ifdef BCM_CNIC
/**
- * Set/Clear FIP MAC(s) at the next enties in the CAM after the ETH
- * MAC(s). This function will wait until the ramdord completion
- * returns.
+ * bnx2x_set_fip_eth_mac_addr - Set/Clear FIP MAC(s)
*
- * @param bp driver handle
- * @param set set or clear the CAM entry
+ * @bp: driver handle
+ * @set: set or clear the CAM entry
*
- * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ * Used next enties in the CAM after the ETH MAC(s).
+ * This function will wait until the ramdord completion returns.
+ * Return 0 if cussess, -ENODEV if ramrod doesn't return.
*/
int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set);
/**
- * Set/Clear ALL_ENODE mcast MAC.
+ * bnx2x_set_all_enode_macs - Set/Clear ALL_ENODE mcast MAC.
*
- * @param bp
- * @param set
- *
- * @return int
+ * @bp: driver handle
+ * @set: set or clear
*/
int bnx2x_set_all_enode_macs(struct bnx2x *bp, int set);
#endif
/**
- * Set MAC filtering configurations.
+ * bnx2x_set_rx_mode - set MAC filtering configurations.
*
- * @remarks called with netif_tx_lock from dev_mcast.c
+ * @dev: netdevice
*
- * @param dev net_device
+ * called with netif_tx_lock from dev_mcast.c
*/
void bnx2x_set_rx_mode(struct net_device *dev);
/**
- * Configure MAC filtering rules in a FW.
+ * bnx2x_set_storm_rx_mode - configure MAC filtering rules in a FW.
*
- * @param bp driver handle
+ * @bp: driver handle
*/
void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
@@ -290,63 +307,59 @@
void bnx2x_disable_close_the_gate(struct bnx2x *bp);
/**
- * Perform statistics handling according to event
+ * bnx2x_stats_handle - perform statistics handling according to event.
*
- * @param bp driver handle
- * @param event bnx2x_stats_event
+ * @bp: driver handle
+ * @event: bnx2x_stats_event
*/
void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
/**
- * Handle ramrods completion
+ * bnx2x_sp_event - handle ramrods completion.
*
- * @param fp fastpath handle for the event
- * @param rr_cqe eth_rx_cqe
+ * @fp: fastpath handle for the event
+ * @rr_cqe: eth_rx_cqe
*/
void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe);
/**
- * Init/halt function before/after sending
- * CLIENT_SETUP/CFC_DEL for the first/last client.
+ * bnx2x_func_start - init function
*
- * @param bp
+ * @bp: driver handle
*
- * @return int
+ * Must be called before sending CLIENT_SETUP for the first client.
*/
int bnx2x_func_start(struct bnx2x *bp);
/**
- * Prepare ILT configurations according to current driver
- * parameters.
+ * bnx2x_ilt_set_info - prepare ILT configurations.
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x_ilt_set_info(struct bnx2x *bp);
/**
- * Inintialize dcbx protocol
+ * bnx2x_dcbx_init - initialize dcbx protocol.
*
- * @param bp
+ * @bp: driver handle
*/
void bnx2x_dcbx_init(struct bnx2x *bp);
/**
- * Set power state to the requested value. Currently only D0 and
- * D3hot are supported.
+ * bnx2x_set_power_state - set power state to the requested value.
*
- * @param bp
- * @param state D0 or D3hot
+ * @bp: driver handle
+ * @state: required state D0 or D3hot
*
- * @return int
+ * Currently only D0 and D3hot are supported.
*/
int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state);
/**
- * Updates MAX part of MF configuration in HW
- * (if required)
+ * bnx2x_update_max_mf_config - update MAX part of MF configuration in HW.
*
- * @param bp
- * @param value
+ * @bp: driver handle
+ * @value: new value
*/
void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value);
@@ -377,84 +390,73 @@
/* Release IRQ vectors */
void bnx2x_free_irq(struct bnx2x *bp);
+void bnx2x_free_fp_mem(struct bnx2x *bp);
+int bnx2x_alloc_fp_mem(struct bnx2x *bp);
+
void bnx2x_init_rx_rings(struct bnx2x *bp);
void bnx2x_free_skbs(struct bnx2x *bp);
void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw);
void bnx2x_netif_start(struct bnx2x *bp);
/**
- * Fill msix_table, request vectors, update num_queues according
- * to number of available vectors
+ * bnx2x_enable_msix - set msix configuration.
*
- * @param bp
+ * @bp: driver handle
*
- * @return int
+ * fills msix_table, requests vectors, updates num_queues
+ * according to number of available vectors.
*/
int bnx2x_enable_msix(struct bnx2x *bp);
/**
- * Request msi mode from OS, updated internals accordingly
+ * bnx2x_enable_msi - request msi mode from OS, updated internals accordingly
*
- * @param bp
- *
- * @return int
+ * @bp: driver handle
*/
int bnx2x_enable_msi(struct bnx2x *bp);
/**
- * NAPI callback
+ * bnx2x_poll - NAPI callback
*
- * @param napi
- * @param budget
+ * @napi: napi structure
+ * @budget:
*
- * @return int
*/
int bnx2x_poll(struct napi_struct *napi, int budget);
/**
- * Allocate/release memories outsize main driver structure
+ * bnx2x_alloc_mem_bp - allocate memories outsize main driver structure
*
- * @param bp
- *
- * @return int
+ * @bp: driver handle
*/
int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp);
+
+/**
+ * bnx2x_free_mem_bp - release memories outsize main driver structure
+ *
+ * @bp: driver handle
+ */
void bnx2x_free_mem_bp(struct bnx2x *bp);
/**
- * Change mtu netdev callback
+ * bnx2x_change_mtu - change mtu netdev callback
*
- * @param dev
- * @param new_mtu
+ * @dev: net device
+ * @new_mtu: requested mtu
*
- * @return int
*/
int bnx2x_change_mtu(struct net_device *dev, int new_mtu);
+u32 bnx2x_fix_features(struct net_device *dev, u32 features);
+int bnx2x_set_features(struct net_device *dev, u32 features);
+
/**
- * tx timeout netdev callback
+ * bnx2x_tx_timeout - tx timeout netdev callback
*
- * @param dev
- * @param new_mtu
- *
- * @return int
+ * @dev: net device
*/
void bnx2x_tx_timeout(struct net_device *dev);
-#ifdef BCM_VLAN
-/**
- * vlan rx register netdev callback
- *
- * @param dev
- * @param new_mtu
- *
- * @return int
- */
-void bnx2x_vlan_rx_register(struct net_device *dev,
- struct vlan_group *vlgrp);
-
-#endif
-
static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
{
barrier(); /* status block is written to by the chip */
@@ -705,7 +707,7 @@
/**
* disables tx from stack point of view
*
- * @param bp
+ * @bp: driver handle
*/
static inline void bnx2x_tx_disable(struct bnx2x *bp)
{
@@ -880,6 +882,9 @@
{
int i;
+ if (fp->disable_tpa)
+ return;
+
for (i = 0; i < last; i++)
bnx2x_free_rx_sge(bp, fp, i);
}
@@ -908,36 +913,39 @@
}
}
+static inline void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
+{
+ int i;
+
+ for (i = 1; i <= NUM_TX_RINGS; i++) {
+ struct eth_tx_next_bd *tx_next_bd =
+ &fp->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
+
+ tx_next_bd->addr_hi =
+ cpu_to_le32(U64_HI(fp->tx_desc_mapping +
+ BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
+ tx_next_bd->addr_lo =
+ cpu_to_le32(U64_LO(fp->tx_desc_mapping +
+ BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
+ }
+
+ SET_FLAG(fp->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
+ fp->tx_db.data.zero_fill1 = 0;
+ fp->tx_db.data.prod = 0;
+
+ fp->tx_pkt_prod = 0;
+ fp->tx_pkt_cons = 0;
+ fp->tx_bd_prod = 0;
+ fp->tx_bd_cons = 0;
+ fp->tx_pkt = 0;
+}
static inline void bnx2x_init_tx_rings(struct bnx2x *bp)
{
- int i, j;
+ int i;
- for_each_tx_queue(bp, j) {
- struct bnx2x_fastpath *fp = &bp->fp[j];
-
- for (i = 1; i <= NUM_TX_RINGS; i++) {
- struct eth_tx_next_bd *tx_next_bd =
- &fp->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
-
- tx_next_bd->addr_hi =
- cpu_to_le32(U64_HI(fp->tx_desc_mapping +
- BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
- tx_next_bd->addr_lo =
- cpu_to_le32(U64_LO(fp->tx_desc_mapping +
- BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
- }
-
- SET_FLAG(fp->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
- fp->tx_db.data.zero_fill1 = 0;
- fp->tx_db.data.prod = 0;
-
- fp->tx_pkt_prod = 0;
- fp->tx_pkt_cons = 0;
- fp->tx_bd_prod = 0;
- fp->tx_bd_cons = 0;
- fp->tx_pkt = 0;
- }
+ for_each_tx_queue(bp, i)
+ bnx2x_init_tx_ring_one(&bp->fp[i]);
}
static inline void bnx2x_set_next_page_rx_bd(struct bnx2x_fastpath *fp)
@@ -992,6 +1000,44 @@
}
}
+/* Returns the number of actually allocated BDs */
+static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
+ int rx_ring_size)
+{
+ struct bnx2x *bp = fp->bp;
+ u16 ring_prod, cqe_ring_prod;
+ int i;
+
+ fp->rx_comp_cons = 0;
+ cqe_ring_prod = ring_prod = 0;
+
+ /* This routine is called only during fo init so
+ * fp->eth_q_stats.rx_skb_alloc_failed = 0
+ */
+ for (i = 0; i < rx_ring_size; i++) {
+ if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
+ fp->eth_q_stats.rx_skb_alloc_failed++;
+ continue;
+ }
+ ring_prod = NEXT_RX_IDX(ring_prod);
+ cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
+ WARN_ON(ring_prod <= (i - fp->eth_q_stats.rx_skb_alloc_failed));
+ }
+
+ if (fp->eth_q_stats.rx_skb_alloc_failed)
+ BNX2X_ERR("was only able to allocate "
+ "%d rx skbs on queue[%d]\n",
+ (i - fp->eth_q_stats.rx_skb_alloc_failed), fp->index);
+
+ fp->rx_bd_prod = ring_prod;
+ /* Limit the CQE producer by the CQE ring size */
+ fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT,
+ cqe_ring_prod);
+ fp->rx_pkt = fp->rx_calls = 0;
+
+ return i - fp->eth_q_stats.rx_skb_alloc_failed;
+}
+
#ifdef BCM_CNIC
static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
{
@@ -1041,12 +1087,23 @@
struct cmng_struct_per_port *cmng,
u8 port)
{
- size_t size = sizeof(struct cmng_struct_per_port);
+ size_t size =
+ sizeof(struct rate_shaping_vars_per_port) +
+ sizeof(struct fairness_vars_per_port) +
+ sizeof(struct safc_struct_per_port) +
+ sizeof(struct pfc_struct_per_port);
u32 addr = BAR_XSTRORM_INTMEM +
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port);
__storm_memset_struct(bp, addr, size, (u32 *)cmng);
+
+ addr += size + 4 /* SKIP DCB+LLFC */;
+ size = sizeof(struct cmng_struct_per_port) -
+ size /* written */ - 4 /*skipped*/;
+
+ __storm_memset_struct(bp, addr, size,
+ (u32 *)(cmng->traffic_type_to_priority_cos));
}
/* HW Lock for shared dual port PHYs */
@@ -1054,12 +1111,11 @@
void bnx2x_release_phy_lock(struct bnx2x *bp);
/**
- * Extracts MAX BW part from MF configuration.
+ * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration.
*
- * @param bp
- * @param mf_cfg
+ * @bp: driver handle
+ * @mf_cfg: MF configuration
*
- * @return u16
*/
static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg)
{
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
index 9a24d79..410a49e 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -1,6 +1,6 @@
/* bnx2x_dcb.c: Broadcom Everest network driver.
*
- * Copyright 2009-2010 Broadcom Corporation
+ * Copyright 2009-2011 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
@@ -485,6 +485,36 @@
}
}
+#ifdef BCM_DCBNL
+static int bnx2x_dcbx_read_shmem_remote_mib(struct bnx2x *bp)
+{
+ struct lldp_remote_mib remote_mib = {0};
+ u32 dcbx_remote_mib_offset = SHMEM2_RD(bp, dcbx_remote_mib_offset);
+ int rc;
+
+ DP(NETIF_MSG_LINK, "dcbx_remote_mib_offset 0x%x\n",
+ dcbx_remote_mib_offset);
+
+ if (SHMEM_DCBX_REMOTE_MIB_NONE == dcbx_remote_mib_offset) {
+ BNX2X_ERR("FW doesn't support dcbx_remote_mib_offset\n");
+ return -EINVAL;
+ }
+
+ rc = bnx2x_dcbx_read_mib(bp, (u32 *)&remote_mib, dcbx_remote_mib_offset,
+ DCBX_READ_REMOTE_MIB);
+
+ if (rc) {
+ BNX2X_ERR("Faild to read remote mib from FW\n");
+ return rc;
+ }
+
+ /* save features and flags */
+ bp->dcbx_remote_feat = remote_mib.features;
+ bp->dcbx_remote_flags = remote_mib.flags;
+ return 0;
+}
+#endif
+
static int bnx2x_dcbx_read_shmem_neg_results(struct bnx2x *bp)
{
struct lldp_local_mib local_mib = {0};
@@ -571,6 +601,28 @@
{
switch (state) {
case BNX2X_DCBX_STATE_NEG_RECEIVED:
+#ifdef BCM_CNIC
+ if (bp->state != BNX2X_STATE_OPENING_WAIT4_LOAD) {
+ struct cnic_ops *c_ops;
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+ bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
+ cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
+ cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops) {
+ bnx2x_cnic_notify(bp, CNIC_CTL_STOP_ISCSI_CMD);
+ rcu_read_unlock();
+ return;
+ }
+ rcu_read_unlock();
+ }
+
+ /* fall through if no CNIC initialized */
+ case BNX2X_DCBX_STATE_ISCSI_STOPPED:
+#endif
+
{
DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_NEG_RECEIVED\n");
#ifdef BCM_DCBNL
@@ -579,6 +631,10 @@
* negotiation results
*/
bnx2x_dcbnl_update_applist(bp, true);
+
+ /* Read rmeote mib if dcbx is in the FW */
+ if (bnx2x_dcbx_read_shmem_remote_mib(bp))
+ return;
#endif
/* Read neg results if dcbx is in the FW */
if (bnx2x_dcbx_read_shmem_neg_results(bp))
@@ -1057,12 +1113,6 @@
}
}
-
-/*******************************************************************************
- * Description: single priority group
- *
- * Return:
- ******************************************************************************/
static void bnx2x_dcbx_ets_disabled_entry_data(struct bnx2x *bp,
struct cos_help_data *cos_data,
u32 pri_join_mask)
@@ -1075,11 +1125,6 @@
cos_data->num_of_cos = 1;
}
-/*******************************************************************************
- * Description: updating the cos bw
- *
- * Return:
- ******************************************************************************/
static inline void bnx2x_dcbx_add_to_cos_bw(struct bnx2x *bp,
struct cos_entry_help_data *data,
u8 pg_bw)
@@ -1090,11 +1135,6 @@
data->cos_bw += pg_bw;
}
-/*******************************************************************************
- * Description: single priority group
- *
- * Return:
- ******************************************************************************/
static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp,
struct cos_help_data *cos_data,
u32 *pg_pri_orginal_spread,
@@ -1347,11 +1387,6 @@
}
}
-/*******************************************************************************
- * Description: Still
- *
- * Return:
- ******************************************************************************/
static void bnx2x_dcbx_three_pg_to_cos_params(
struct bnx2x *bp,
struct pg_help_data *pg_help_data,
@@ -1539,11 +1574,6 @@
}
}
-/*******************************************************************************
- * Description: Fill pfc_config struct that will be sent in DCBX start ramrod
- *
- * Return:
- ******************************************************************************/
static void bnx2x_pfc_fw_struct_e2(struct bnx2x *bp)
{
struct flow_control_configuration *pfc_fw_cfg = NULL;
@@ -2035,7 +2065,6 @@
return 0;
}
-
static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid,
u8 *flags)
{
@@ -2115,31 +2144,100 @@
return rval;
}
+static int bnx2x_peer_appinfo(struct net_device *netdev,
+ struct dcb_peer_app_info *info, u16* app_count)
+{
+ int i;
+ struct bnx2x *bp = netdev_priv(netdev);
+
+ DP(NETIF_MSG_LINK, "APP-INFO\n");
+
+ info->willing = (bp->dcbx_remote_flags & DCBX_APP_REM_WILLING) ?: 0;
+ info->error = (bp->dcbx_remote_flags & DCBX_APP_RX_ERROR) ?: 0;
+ *app_count = 0;
+
+ for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++)
+ if (bp->dcbx_remote_feat.app.app_pri_tbl[i].appBitfield &
+ DCBX_APP_ENTRY_VALID)
+ (*app_count)++;
+ return 0;
+}
+
+static int bnx2x_peer_apptable(struct net_device *netdev,
+ struct dcb_app *table)
+{
+ int i, j;
+ struct bnx2x *bp = netdev_priv(netdev);
+
+ DP(NETIF_MSG_LINK, "APP-TABLE\n");
+
+ for (i = 0, j = 0; i < DCBX_MAX_APP_PROTOCOL; i++) {
+ struct dcbx_app_priority_entry *ent =
+ &bp->dcbx_remote_feat.app.app_pri_tbl[i];
+
+ if (ent->appBitfield & DCBX_APP_ENTRY_VALID) {
+ table[j].selector = bnx2x_dcbx_dcbnl_app_idtype(ent);
+ table[j].priority = bnx2x_dcbx_dcbnl_app_up(ent);
+ table[j++].protocol = ent->app_id;
+ }
+ }
+ return 0;
+}
+
+static int bnx2x_cee_peer_getpg(struct net_device *netdev, struct cee_pg *pg)
+{
+ int i;
+ struct bnx2x *bp = netdev_priv(netdev);
+
+ pg->willing = (bp->dcbx_remote_flags & DCBX_ETS_REM_WILLING) ?: 0;
+
+ for (i = 0; i < CEE_DCBX_MAX_PGS; i++) {
+ pg->pg_bw[i] =
+ DCBX_PG_BW_GET(bp->dcbx_remote_feat.ets.pg_bw_tbl, i);
+ pg->prio_pg[i] =
+ DCBX_PRI_PG_GET(bp->dcbx_remote_feat.ets.pri_pg_tbl, i);
+ }
+ return 0;
+}
+
+static int bnx2x_cee_peer_getpfc(struct net_device *netdev,
+ struct cee_pfc *pfc)
+{
+ struct bnx2x *bp = netdev_priv(netdev);
+ pfc->tcs_supported = bp->dcbx_remote_feat.pfc.pfc_caps;
+ pfc->pfc_en = bp->dcbx_remote_feat.pfc.pri_en_bitmap;
+ return 0;
+}
+
const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops = {
- .getstate = bnx2x_dcbnl_get_state,
- .setstate = bnx2x_dcbnl_set_state,
- .getpermhwaddr = bnx2x_dcbnl_get_perm_hw_addr,
- .setpgtccfgtx = bnx2x_dcbnl_set_pg_tccfg_tx,
- .setpgbwgcfgtx = bnx2x_dcbnl_set_pg_bwgcfg_tx,
- .setpgtccfgrx = bnx2x_dcbnl_set_pg_tccfg_rx,
- .setpgbwgcfgrx = bnx2x_dcbnl_set_pg_bwgcfg_rx,
- .getpgtccfgtx = bnx2x_dcbnl_get_pg_tccfg_tx,
- .getpgbwgcfgtx = bnx2x_dcbnl_get_pg_bwgcfg_tx,
- .getpgtccfgrx = bnx2x_dcbnl_get_pg_tccfg_rx,
- .getpgbwgcfgrx = bnx2x_dcbnl_get_pg_bwgcfg_rx,
- .setpfccfg = bnx2x_dcbnl_set_pfc_cfg,
- .getpfccfg = bnx2x_dcbnl_get_pfc_cfg,
- .setall = bnx2x_dcbnl_set_all,
- .getcap = bnx2x_dcbnl_get_cap,
- .getnumtcs = bnx2x_dcbnl_get_numtcs,
- .setnumtcs = bnx2x_dcbnl_set_numtcs,
- .getpfcstate = bnx2x_dcbnl_get_pfc_state,
- .setpfcstate = bnx2x_dcbnl_set_pfc_state,
- .setapp = bnx2x_dcbnl_set_app_up,
- .getdcbx = bnx2x_dcbnl_get_dcbx,
- .setdcbx = bnx2x_dcbnl_set_dcbx,
- .getfeatcfg = bnx2x_dcbnl_get_featcfg,
- .setfeatcfg = bnx2x_dcbnl_set_featcfg,
+ .getstate = bnx2x_dcbnl_get_state,
+ .setstate = bnx2x_dcbnl_set_state,
+ .getpermhwaddr = bnx2x_dcbnl_get_perm_hw_addr,
+ .setpgtccfgtx = bnx2x_dcbnl_set_pg_tccfg_tx,
+ .setpgbwgcfgtx = bnx2x_dcbnl_set_pg_bwgcfg_tx,
+ .setpgtccfgrx = bnx2x_dcbnl_set_pg_tccfg_rx,
+ .setpgbwgcfgrx = bnx2x_dcbnl_set_pg_bwgcfg_rx,
+ .getpgtccfgtx = bnx2x_dcbnl_get_pg_tccfg_tx,
+ .getpgbwgcfgtx = bnx2x_dcbnl_get_pg_bwgcfg_tx,
+ .getpgtccfgrx = bnx2x_dcbnl_get_pg_tccfg_rx,
+ .getpgbwgcfgrx = bnx2x_dcbnl_get_pg_bwgcfg_rx,
+ .setpfccfg = bnx2x_dcbnl_set_pfc_cfg,
+ .getpfccfg = bnx2x_dcbnl_get_pfc_cfg,
+ .setall = bnx2x_dcbnl_set_all,
+ .getcap = bnx2x_dcbnl_get_cap,
+ .getnumtcs = bnx2x_dcbnl_get_numtcs,
+ .setnumtcs = bnx2x_dcbnl_set_numtcs,
+ .getpfcstate = bnx2x_dcbnl_get_pfc_state,
+ .setpfcstate = bnx2x_dcbnl_set_pfc_state,
+ .setapp = bnx2x_dcbnl_set_app_up,
+ .getdcbx = bnx2x_dcbnl_get_dcbx,
+ .setdcbx = bnx2x_dcbnl_set_dcbx,
+ .getfeatcfg = bnx2x_dcbnl_get_featcfg,
+ .setfeatcfg = bnx2x_dcbnl_set_featcfg,
+ .peer_getappinfo = bnx2x_peer_appinfo,
+ .peer_getapptable = bnx2x_peer_apptable,
+ .cee_peer_getpg = bnx2x_cee_peer_getpg,
+ .cee_peer_getpfc = bnx2x_cee_peer_getpfc,
};
#endif /* BCM_DCBNL */
diff --git a/drivers/net/bnx2x/bnx2x_dcb.h b/drivers/net/bnx2x/bnx2x_dcb.h
index 71b8eda4..bed369d 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.h
+++ b/drivers/net/bnx2x/bnx2x_dcb.h
@@ -1,6 +1,6 @@
/* bnx2x_dcb.h: Broadcom Everest network driver.
*
- * Copyright 2009-2010 Broadcom Corporation
+ * Copyright 2009-2011 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
@@ -61,9 +61,6 @@
#define BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE 1
#define BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID (BNX2X_DCBX_CONFIG_INV_VALUE)
-/*******************************************************************************
- * LLDP protocol configuration parameters.
- ******************************************************************************/
struct bnx2x_config_lldp_params {
u32 overwrite_settings;
u32 msg_tx_hold;
@@ -83,9 +80,6 @@
u32 app_id;
};
-/*******************************************************************************
- * DCBX protocol configuration parameters.
- ******************************************************************************/
struct bnx2x_config_dcbx_params {
u32 overwrite_settings;
u32 admin_dcbx_version;
@@ -183,9 +177,13 @@
enum {
BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1,
- BNX2X_DCBX_STATE_TX_PAUSED = 0x2,
- BNX2X_DCBX_STATE_TX_RELEASED = 0x4
+#ifdef BCM_CNIC
+ BNX2X_DCBX_STATE_ISCSI_STOPPED,
+#endif
+ BNX2X_DCBX_STATE_TX_PAUSED,
+ BNX2X_DCBX_STATE_TX_RELEASED
};
+
void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state);
/* DCB netlink */
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 89cb977..727fe89 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -1,6 +1,6 @@
/* bnx2x_ethtool.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -167,6 +167,7 @@
{
struct bnx2x *bp = netdev_priv(dev);
int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+
/* Dual Media boards present all available port types */
cmd->supported = bp->port.supported[cfg_idx] |
(bp->port.supported[cfg_idx ^ 1] &
@@ -176,16 +177,16 @@
if ((bp->state == BNX2X_STATE_OPEN) &&
!(bp->flags & MF_FUNC_DIS) &&
(bp->link_vars.link_up)) {
- cmd->speed = bp->link_vars.line_speed;
+ ethtool_cmd_speed_set(cmd, bp->link_vars.line_speed);
cmd->duplex = bp->link_vars.duplex;
} else {
-
- cmd->speed = bp->link_params.req_line_speed[cfg_idx];
+ ethtool_cmd_speed_set(
+ cmd, bp->link_params.req_line_speed[cfg_idx]);
cmd->duplex = bp->link_params.req_duplex[cfg_idx];
}
if (IS_MF(bp))
- cmd->speed = bnx2x_get_mf_speed(bp);
+ ethtool_cmd_speed_set(cmd, bnx2x_get_mf_speed(bp));
if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
cmd->port = PORT_TP;
@@ -206,10 +207,11 @@
cmd->maxrxpkt = 0;
DP(NETIF_MSG_LINK, "ethtool_cmd: cmd %d\n"
- DP_LEVEL " supported 0x%x advertising 0x%x speed %d\n"
+ DP_LEVEL " supported 0x%x advertising 0x%x speed %u\n"
DP_LEVEL " duplex %d port %d phy_address %d transceiver %d\n"
DP_LEVEL " autoneg %d maxtxpkt %d maxrxpkt %d\n",
- cmd->cmd, cmd->supported, cmd->advertising, cmd->speed,
+ cmd->cmd, cmd->supported, cmd->advertising,
+ ethtool_cmd_speed(cmd),
cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
@@ -226,16 +228,15 @@
return 0;
DP(NETIF_MSG_LINK, "ethtool_cmd: cmd %d\n"
- " supported 0x%x advertising 0x%x speed %d speed_hi %d\n"
+ " supported 0x%x advertising 0x%x speed %u\n"
" duplex %d port %d phy_address %d transceiver %d\n"
" autoneg %d maxtxpkt %d maxrxpkt %d\n",
- cmd->cmd, cmd->supported, cmd->advertising, cmd->speed,
- cmd->speed_hi,
+ cmd->cmd, cmd->supported, cmd->advertising,
+ ethtool_cmd_speed(cmd),
cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
- speed = cmd->speed;
- speed |= (cmd->speed_hi << 16);
+ speed = ethtool_cmd_speed(cmd);
if (IS_MF_SI(bp)) {
u32 part;
@@ -439,7 +440,7 @@
break;
default:
- DP(NETIF_MSG_LINK, "Unsupported speed %d\n", speed);
+ DP(NETIF_MSG_LINK, "Unsupported speed %u\n", speed);
return -EINVAL;
}
@@ -1219,7 +1220,8 @@
}
if ((ering->rx_pending > MAX_RX_AVAIL) ||
- (ering->rx_pending < MIN_RX_AVAIL) ||
+ (ering->rx_pending < (bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+ MIN_RX_SIZE_TPA)) ||
(ering->tx_pending > MAX_TX_AVAIL) ||
(ering->tx_pending <= MAX_SKB_FRAGS + 4))
return -EINVAL;
@@ -1299,91 +1301,6 @@
return 0;
}
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
- struct bnx2x *bp = netdev_priv(dev);
- int changed = 0;
- int rc = 0;
-
- if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
- printk(KERN_ERR "Handling parity error recovery. Try again later\n");
- return -EAGAIN;
- }
-
- if (!(data & ETH_FLAG_RXVLAN))
- return -EINVAL;
-
- if ((data & ETH_FLAG_LRO) && bp->rx_csum && bp->disable_tpa)
- return -EINVAL;
-
- rc = ethtool_op_set_flags(dev, data, ETH_FLAG_LRO | ETH_FLAG_RXVLAN |
- ETH_FLAG_TXVLAN | ETH_FLAG_RXHASH);
- if (rc)
- return rc;
-
- /* TPA requires Rx CSUM offloading */
- if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
- if (!(bp->flags & TPA_ENABLE_FLAG)) {
- bp->flags |= TPA_ENABLE_FLAG;
- changed = 1;
- }
- } else if (bp->flags & TPA_ENABLE_FLAG) {
- dev->features &= ~NETIF_F_LRO;
- bp->flags &= ~TPA_ENABLE_FLAG;
- changed = 1;
- }
-
- if (changed && netif_running(dev)) {
- bnx2x_nic_unload(bp, UNLOAD_NORMAL);
- rc = bnx2x_nic_load(bp, LOAD_NORMAL);
- }
-
- return rc;
-}
-
-static u32 bnx2x_get_rx_csum(struct net_device *dev)
-{
- struct bnx2x *bp = netdev_priv(dev);
-
- return bp->rx_csum;
-}
-
-static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct bnx2x *bp = netdev_priv(dev);
- int rc = 0;
-
- if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
- printk(KERN_ERR "Handling parity error recovery. Try again later\n");
- return -EAGAIN;
- }
-
- bp->rx_csum = data;
-
- /* Disable TPA, when Rx CSUM is disabled. Otherwise all
- TPA'ed packets will be discarded due to wrong TCP CSUM */
- if (!data) {
- u32 flags = ethtool_op_get_flags(dev);
-
- rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
- }
-
- return rc;
-}
-
-static int bnx2x_set_tso(struct net_device *dev, u32 data)
-{
- if (data) {
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
- dev->features |= NETIF_F_TSO6;
- } else {
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO_ECN);
- dev->features &= ~NETIF_F_TSO6;
- }
-
- return 0;
-}
-
static const struct {
char string[ETH_GSTRING_LEN];
} bnx2x_tests_str_arr[BNX2X_NUM_TESTS] = {
@@ -2097,36 +2014,38 @@
}
}
-static int bnx2x_phys_id(struct net_device *dev, u32 data)
+static int bnx2x_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct bnx2x *bp = netdev_priv(dev);
- int i;
if (!netif_running(dev))
- return 0;
+ return -EAGAIN;
if (!bp->port.pmf)
- return 0;
+ return -EOPNOTSUPP;
- if (data == 0)
- data = 2;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
- for (i = 0; i < (data * 2); i++) {
- if ((i % 2) == 0)
- bnx2x_set_led(&bp->link_params, &bp->link_vars,
- LED_MODE_ON, SPEED_1000);
- else
- bnx2x_set_led(&bp->link_params, &bp->link_vars,
- LED_MODE_FRONT_PANEL_OFF, 0);
+ case ETHTOOL_ID_ON:
+ bnx2x_set_led(&bp->link_params, &bp->link_vars,
+ LED_MODE_ON, SPEED_1000);
+ break;
- msleep_interruptible(500);
- if (signal_pending(current))
- break;
+ case ETHTOOL_ID_OFF:
+ bnx2x_set_led(&bp->link_params, &bp->link_vars,
+ LED_MODE_FRONT_PANEL_OFF, 0);
+
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ bnx2x_set_led(&bp->link_params, &bp->link_vars,
+ LED_MODE_OPER,
+ bp->link_vars.line_speed);
}
- bnx2x_set_led(&bp->link_params, &bp->link_vars,
- LED_MODE_OPER, bp->link_vars.line_speed);
-
return 0;
}
@@ -2204,20 +2123,10 @@
.set_ringparam = bnx2x_set_ringparam,
.get_pauseparam = bnx2x_get_pauseparam,
.set_pauseparam = bnx2x_set_pauseparam,
- .get_rx_csum = bnx2x_get_rx_csum,
- .set_rx_csum = bnx2x_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .set_flags = bnx2x_set_flags,
- .get_flags = ethtool_op_get_flags,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = bnx2x_set_tso,
.self_test = bnx2x_self_test,
.get_sset_count = bnx2x_get_sset_count,
.get_strings = bnx2x_get_strings,
- .phys_id = bnx2x_phys_id,
+ .set_phys_id = bnx2x_set_phys_id,
.get_ethtool_stats = bnx2x_get_ethtool_stats,
.get_rxnfc = bnx2x_get_rxnfc,
.get_rxfh_indir = bnx2x_get_rxfh_indir,
diff --git a/drivers/net/bnx2x/bnx2x_fw_defs.h b/drivers/net/bnx2x/bnx2x_fw_defs.h
index f4e5b1c..9fe3678 100644
--- a/drivers/net/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
/* bnx2x_fw_defs.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
index f807262..f4a07fb 100644
--- a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
+++ b/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
@@ -1,6 +1,6 @@
/* bnx2x_fw_file_hdr.h: FW binary file header structure.
*
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index dac1bf9..cdf19fe 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -1,6 +1,6 @@
/* bnx2x_hsi.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -1929,7 +1929,7 @@
#define BCM_5710_FW_MAJOR_VERSION 6
#define BCM_5710_FW_MINOR_VERSION 2
-#define BCM_5710_FW_REVISION_VERSION 5
+#define BCM_5710_FW_REVISION_VERSION 9
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/bnx2x/bnx2x_init.h
index fa6dbe3..d539920 100644
--- a/drivers/net/bnx2x/bnx2x_init.h
+++ b/drivers/net/bnx2x/bnx2x_init.h
@@ -1,7 +1,7 @@
/* bnx2x_init.h: Broadcom Everest network driver.
* Structures and macroes needed during the initialization.
*
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_init_ops.h b/drivers/net/bnx2x/bnx2x_init_ops.h
index 66df29f..aafd023 100644
--- a/drivers/net/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/bnx2x/bnx2x_init_ops.h
@@ -2,7 +2,7 @@
* Static functions needed during the initialization.
* This file is "included" in bnx2x_main.c.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 974ef2b..076e11f 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -385,7 +385,7 @@
return 0;
}
/******************************************************************/
-/* ETS section */
+/* PFC section */
/******************************************************************/
static void bnx2x_bmac2_get_pfc_stat(struct link_params *params,
@@ -1301,14 +1301,12 @@
return 0;
}
-/*
- * get_emac_base
+/**
+ * bnx2x_get_emac_base - retrive emac base address
*
- * @param cb
- * @param mdc_mdio_access
- * @param port
- *
- * @return u32
+ * @bp: driver handle
+ * @mdc_mdio_access: access type
+ * @port: port id
*
* This function selects the MDC/MDIO access (through emac0 or
* emac1) depend on the mdc_mdio_access, port, port swapped. Each
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index a97a4a1..f45c0ca 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -1,6 +1,6 @@
/* bnx2x_main.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -2036,7 +2036,7 @@
return CMNG_FNS_NONE;
}
-static void bnx2x_read_mf_cfg(struct bnx2x *bp)
+void bnx2x_read_mf_cfg(struct bnx2x *bp)
{
int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
@@ -2123,7 +2123,6 @@
/* This function is called upon link interrupt */
static void bnx2x_link_attn(struct bnx2x *bp)
{
- u32 prev_link_status = bp->link_vars.link_status;
/* Make sure that we are synced with the current statistics */
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
@@ -2168,17 +2167,15 @@
"single function mode without fairness\n");
}
+ __bnx2x_link_report(bp);
+
if (IS_MF(bp))
bnx2x_link_sync_notify(bp);
-
- /* indicate link status only if link status actually changed */
- if (prev_link_status != bp->link_vars.link_status)
- bnx2x_link_report(bp);
}
void bnx2x__link_status_update(struct bnx2x *bp)
{
- if ((bp->state != BNX2X_STATE_OPEN) || (bp->flags & MF_FUNC_DIS))
+ if (bp->state != BNX2X_STATE_OPEN)
return;
bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
@@ -2188,10 +2185,6 @@
else
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
- /* the link status update could be the result of a DCC event
- hence re-read the shmem mf configuration */
- bnx2x_read_mf_cfg(bp);
-
/* indicate link status */
bnx2x_link_report(bp);
}
@@ -3120,10 +3113,14 @@
if (val & DRV_STATUS_SET_MF_BW)
bnx2x_set_mf_bw(bp);
- bnx2x__link_status_update(bp);
if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
bnx2x_pmf_update(bp);
+ /* Always call it here: bnx2x_link_report() will
+ * prevent the link indication duplication.
+ */
+ bnx2x__link_status_update(bp);
+
if (bp->port.pmf &&
(val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
bp->dcbx_enabled > 0)
@@ -3904,10 +3901,9 @@
if (poll) {
struct bnx2x_fastpath *fp = &bp->fp[0];
- int rc;
bnx2x_tx_int(fp);
- rc = bnx2x_rx_int(fp, 1000);
+ bnx2x_rx_int(fp, 1000);
}
if (!BP_NOMCP(bp)) {
@@ -4062,7 +4058,6 @@
struct hc_status_block_data_e2 sb_data_e2;
struct hc_status_block_data_e1x sb_data_e1x;
struct hc_status_block_sm *hc_sm_p;
- struct hc_index_data *hc_index_p;
int data_size;
u32 *sb_data_p;
@@ -4083,7 +4078,6 @@
sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping);
sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping);
hc_sm_p = sb_data_e2.common.state_machine;
- hc_index_p = sb_data_e2.index_data;
sb_data_p = (u32 *)&sb_data_e2;
data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
} else {
@@ -4097,7 +4091,6 @@
sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping);
sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping);
hc_sm_p = sb_data_e1x.common.state_machine;
- hc_index_p = sb_data_e1x.index_data;
sb_data_p = (u32 *)&sb_data_e1x;
data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
}
@@ -4454,7 +4447,7 @@
fp->state = BNX2X_FP_STATE_CLOSED;
- fp->index = fp->cid = fp_idx;
+ fp->cid = fp_idx;
fp->cl_id = BP_L_ID(bp) + fp_idx;
fp->fw_sb_id = bp->base_fw_ndsb + fp->cl_id + CNIC_CONTEXT_USE;
fp->igu_sb_id = bp->igu_base_sb + fp_idx + CNIC_CONTEXT_USE;
@@ -4566,9 +4559,11 @@
static void bnx2x_gunzip_end(struct bnx2x *bp)
{
- kfree(bp->strm->workspace);
- kfree(bp->strm);
- bp->strm = NULL;
+ if (bp->strm) {
+ kfree(bp->strm->workspace);
+ kfree(bp->strm);
+ bp->strm = NULL;
+ }
if (bp->gunzip_buf) {
dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
@@ -5876,9 +5871,6 @@
bp->dmae_ready = 0;
spin_lock_init(&bp->dmae_lock);
- rc = bnx2x_gunzip_init(bp);
- if (rc)
- return rc;
switch (load_code) {
case FW_MSG_CODE_DRV_LOAD_COMMON:
@@ -5922,80 +5914,10 @@
void bnx2x_free_mem(struct bnx2x *bp)
{
-
-#define BNX2X_PCI_FREE(x, y, size) \
- do { \
- if (x) { \
- dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \
- x = NULL; \
- y = 0; \
- } \
- } while (0)
-
-#define BNX2X_FREE(x) \
- do { \
- if (x) { \
- kfree((void *)x); \
- x = NULL; \
- } \
- } while (0)
-
- int i;
+ bnx2x_gunzip_end(bp);
/* fastpath */
- /* Common */
- for_each_queue(bp, i) {
-#ifdef BCM_CNIC
- /* FCoE client uses default status block */
- if (IS_FCOE_IDX(i)) {
- union host_hc_status_block *sb =
- &bnx2x_fp(bp, i, status_blk);
- memset(sb, 0, sizeof(union host_hc_status_block));
- bnx2x_fp(bp, i, status_blk_mapping) = 0;
- } else {
-#endif
- /* status blocks */
- if (CHIP_IS_E2(bp))
- BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk.e2_sb),
- bnx2x_fp(bp, i, status_blk_mapping),
- sizeof(struct host_hc_status_block_e2));
- else
- BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk.e1x_sb),
- bnx2x_fp(bp, i, status_blk_mapping),
- sizeof(struct host_hc_status_block_e1x));
-#ifdef BCM_CNIC
- }
-#endif
- }
- /* Rx */
- for_each_rx_queue(bp, i) {
-
- /* fastpath rx rings: rx_buf rx_desc rx_comp */
- BNX2X_FREE(bnx2x_fp(bp, i, rx_buf_ring));
- BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_desc_ring),
- bnx2x_fp(bp, i, rx_desc_mapping),
- sizeof(struct eth_rx_bd) * NUM_RX_BD);
-
- BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_comp_ring),
- bnx2x_fp(bp, i, rx_comp_mapping),
- sizeof(struct eth_fast_path_rx_cqe) *
- NUM_RCQ_BD);
-
- /* SGE ring */
- BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
- BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
- bnx2x_fp(bp, i, rx_sge_mapping),
- BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
- }
- /* Tx */
- for_each_tx_queue(bp, i) {
-
- /* fastpath tx rings: tx_buf tx_desc */
- BNX2X_FREE(bnx2x_fp(bp, i, tx_buf_ring));
- BNX2X_PCI_FREE(bnx2x_fp(bp, i, tx_desc_ring),
- bnx2x_fp(bp, i, tx_desc_mapping),
- sizeof(union eth_tx_bd_types) * NUM_TX_BD);
- }
+ bnx2x_free_fp_mem(bp);
/* end of fastpath */
BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
@@ -6028,101 +5950,13 @@
BCM_PAGE_SIZE * NUM_EQ_PAGES);
BNX2X_FREE(bp->rx_indir_table);
-
-#undef BNX2X_PCI_FREE
-#undef BNX2X_KFREE
}
-static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
-{
- union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
- if (CHIP_IS_E2(bp)) {
- bnx2x_fp(bp, index, sb_index_values) =
- (__le16 *)status_blk.e2_sb->sb.index_values;
- bnx2x_fp(bp, index, sb_running_index) =
- (__le16 *)status_blk.e2_sb->sb.running_index;
- } else {
- bnx2x_fp(bp, index, sb_index_values) =
- (__le16 *)status_blk.e1x_sb->sb.index_values;
- bnx2x_fp(bp, index, sb_running_index) =
- (__le16 *)status_blk.e1x_sb->sb.running_index;
- }
-}
int bnx2x_alloc_mem(struct bnx2x *bp)
{
-#define BNX2X_PCI_ALLOC(x, y, size) \
- do { \
- x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
- if (x == NULL) \
- goto alloc_mem_err; \
- memset(x, 0, size); \
- } while (0)
-
-#define BNX2X_ALLOC(x, size) \
- do { \
- x = kzalloc(size, GFP_KERNEL); \
- if (x == NULL) \
- goto alloc_mem_err; \
- } while (0)
-
- int i;
-
- /* fastpath */
- /* Common */
- for_each_queue(bp, i) {
- union host_hc_status_block *sb = &bnx2x_fp(bp, i, status_blk);
- bnx2x_fp(bp, i, bp) = bp;
- /* status blocks */
-#ifdef BCM_CNIC
- if (!IS_FCOE_IDX(i)) {
-#endif
- if (CHIP_IS_E2(bp))
- BNX2X_PCI_ALLOC(sb->e2_sb,
- &bnx2x_fp(bp, i, status_blk_mapping),
- sizeof(struct host_hc_status_block_e2));
- else
- BNX2X_PCI_ALLOC(sb->e1x_sb,
- &bnx2x_fp(bp, i, status_blk_mapping),
- sizeof(struct host_hc_status_block_e1x));
-#ifdef BCM_CNIC
- }
-#endif
- set_sb_shortcuts(bp, i);
- }
- /* Rx */
- for_each_queue(bp, i) {
-
- /* fastpath rx rings: rx_buf rx_desc rx_comp */
- BNX2X_ALLOC(bnx2x_fp(bp, i, rx_buf_ring),
- sizeof(struct sw_rx_bd) * NUM_RX_BD);
- BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_desc_ring),
- &bnx2x_fp(bp, i, rx_desc_mapping),
- sizeof(struct eth_rx_bd) * NUM_RX_BD);
-
- BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_comp_ring),
- &bnx2x_fp(bp, i, rx_comp_mapping),
- sizeof(struct eth_fast_path_rx_cqe) *
- NUM_RCQ_BD);
-
- /* SGE ring */
- BNX2X_ALLOC(bnx2x_fp(bp, i, rx_page_ring),
- sizeof(struct sw_rx_page) * NUM_RX_SGE);
- BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_sge_ring),
- &bnx2x_fp(bp, i, rx_sge_mapping),
- BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
- }
- /* Tx */
- for_each_queue(bp, i) {
-
- /* fastpath tx rings: tx_buf tx_desc */
- BNX2X_ALLOC(bnx2x_fp(bp, i, tx_buf_ring),
- sizeof(struct sw_tx_bd) * NUM_TX_BD);
- BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, tx_desc_ring),
- &bnx2x_fp(bp, i, tx_desc_mapping),
- sizeof(union eth_tx_bd_types) * NUM_TX_BD);
- }
- /* end of fastpath */
+ if (bnx2x_gunzip_init(bp))
+ return -ENOMEM;
#ifdef BCM_CNIC
if (CHIP_IS_E2(bp))
@@ -6162,14 +5996,18 @@
BNX2X_ALLOC(bp->rx_indir_table, sizeof(bp->rx_indir_table[0]) *
TSTORM_INDIRECTION_TABLE_SIZE);
+
+ /* fastpath */
+ /* need to be done at the end, since it's self adjusting to amount
+ * of memory available for RSS queues
+ */
+ if (bnx2x_alloc_fp_mem(bp))
+ goto alloc_mem_err;
return 0;
alloc_mem_err:
bnx2x_free_mem(bp);
return -ENOMEM;
-
-#undef BNX2X_PCI_ALLOC
-#undef BNX2X_ALLOC
}
/*
@@ -6197,14 +6035,14 @@
}
/**
- * Sets a MAC in a CAM for a few L2 Clients for E1x chips
+ * bnx2x_set_mac_addr_gen - set a MAC in a CAM for a few L2 Clients for E1x chips
*
- * @param bp driver descriptor
- * @param set set or clear an entry (1 or 0)
- * @param mac pointer to a buffer containing a MAC
- * @param cl_bit_vec bit vector of clients to register a MAC for
- * @param cam_offset offset in a CAM to use
- * @param is_bcast is the set MAC a broadcast address (for E1 only)
+ * @bp: driver handle
+ * @set: set or clear an entry (1 or 0)
+ * @mac: pointer to a buffer containing a MAC
+ * @cl_bit_vec: bit vector of clients to register a MAC for
+ * @cam_offset: offset in a CAM to use
+ * @is_bcast: is the set MAC a broadcast address (for E1 only)
*/
static void bnx2x_set_mac_addr_gen(struct bnx2x *bp, int set, const u8 *mac,
u32 cl_bit_vec, u8 cam_offset,
@@ -6564,14 +6402,13 @@
#ifdef BCM_CNIC
/**
- * Set iSCSI MAC(s) at the next enties in the CAM after the ETH
- * MAC(s). This function will wait until the ramdord completion
- * returns.
+ * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
*
- * @param bp driver handle
- * @param set set or clear the CAM entry
+ * @bp: driver handle
+ * @set: set or clear the CAM entry
*
- * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ * This function will wait until the ramdord completion returns.
+ * Return 0 if success, -ENODEV if ramrod doesn't return.
*/
static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
{
@@ -6592,14 +6429,13 @@
}
/**
- * Set FCoE L2 MAC(s) at the next enties in the CAM after the
- * ETH MAC(s). This function will wait until the ramdord
- * completion returns.
+ * bnx2x_set_fip_eth_mac_addr - set FCoE L2 MAC(s)
*
- * @param bp driver handle
- * @param set set or clear the CAM entry
+ * @bp: driver handle
+ * @set: set or clear the CAM entry
*
- * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ * This function will wait until the ramrod completion returns.
+ * Returns 0 if success, -ENODEV if ramrod doesn't return.
*/
int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set)
{
@@ -6803,12 +6639,11 @@
}
/**
- * Configure interrupt mode according to current configuration.
+ * bnx2x_set_int_mode - configure interrupt mode
+ *
+ * @bp: driver handle
+ *
* In case of MSI-X it will also try to enable MSI-X.
- *
- * @param bp
- *
- * @return int
*/
static int __devinit bnx2x_set_int_mode(struct bnx2x *bp)
{
@@ -7392,10 +7227,11 @@
MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
}
-/* Restore the value of the `magic' bit.
+/**
+ * bnx2x_clp_reset_done - restore the value of the `magic' bit.
*
- * @param pdev Device handle.
- * @param magic_val Old value of the `magic' bit.
+ * @bp: driver handle
+ * @magic_val: old value of the `magic' bit.
*/
static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
{
@@ -7406,10 +7242,12 @@
}
/**
- * Prepares for MCP reset: takes care of CLP configurations.
+ * bnx2x_reset_mcp_prep - prepare for MCP reset.
*
- * @param bp
- * @param magic_val Old value of 'magic' bit.
+ * @bp: driver handle
+ * @magic_val: old value of 'magic' bit.
+ *
+ * Takes care of CLP configurations.
*/
static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
{
@@ -7434,10 +7272,10 @@
#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
#define MCP_ONE_TIMEOUT 100 /* 100 ms */
-/* Waits for MCP_ONE_TIMEOUT or MCP_ONE_TIMEOUT*10,
- * depending on the HW type.
+/**
+ * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
*
- * @param bp
+ * @bp: driver handle
*/
static inline void bnx2x_mcp_wait_one(struct bnx2x *bp)
{
@@ -8059,13 +7897,9 @@
(val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
- if (BP_E1HVN(bp) == 0) {
- pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
- bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
- } else {
- /* no WOL capability for E1HVN != 0 */
- bp->flags |= NO_WOL_FLAG;
- }
+ pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+ bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+
BNX2X_DEV_INFO("%sWoL capable\n",
(bp->flags & NO_WOL_FLAG) ? "not " : "");
@@ -8571,15 +8405,6 @@
BNX2X_DEV_INFO("Read iSCSI MAC: "
"0x%x:0x%04x\n", val2, val);
bnx2x_set_mac_buf(iscsi_mac, val, val2);
-
- /* Disable iSCSI OOO if MAC configuration is
- * invalid.
- */
- if (!is_valid_ether_addr(iscsi_mac)) {
- bp->flags |= NO_ISCSI_OOO_FLAG |
- NO_ISCSI_FLAG;
- memset(iscsi_mac, 0, ETH_ALEN);
- }
} else
bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
@@ -8592,13 +8417,6 @@
"0x%x:0x%04x\n", val2, val);
bnx2x_set_mac_buf(fip_mac, val, val2);
- /* Disable FCoE if MAC configuration is
- * invalid.
- */
- if (!is_valid_ether_addr(fip_mac)) {
- bp->flags |= NO_FCOE_FLAG;
- memset(bp->fip_mac, 0, ETH_ALEN);
- }
} else
bp->flags |= NO_FCOE_FLAG;
}
@@ -8629,13 +8447,29 @@
else if (!IS_MF(bp))
memcpy(fip_mac, iscsi_mac, ETH_ALEN);
}
+
+ /* Disable iSCSI if MAC configuration is
+ * invalid.
+ */
+ if (!is_valid_ether_addr(iscsi_mac)) {
+ bp->flags |= NO_ISCSI_FLAG;
+ memset(iscsi_mac, 0, ETH_ALEN);
+ }
+
+ /* Disable FCoE if MAC configuration is
+ * invalid.
+ */
+ if (!is_valid_ether_addr(fip_mac)) {
+ bp->flags |= NO_FCOE_FLAG;
+ memset(bp->fip_mac, 0, ETH_ALEN);
+ }
#endif
}
static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
{
int /*abs*/func = BP_ABS_FUNC(bp);
- int vn, port;
+ int vn;
u32 val = 0;
int rc = 0;
@@ -8670,7 +8504,6 @@
bp->mf_ov = 0;
bp->mf_mode = 0;
vn = BP_E1HVN(bp);
- port = BP_PORT(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
DP(NETIF_MSG_PROBE,
@@ -8904,8 +8737,6 @@
bp->multi_mode = multi_mode;
bp->int_mode = int_mode;
- bp->dev->features |= NETIF_F_GRO;
-
/* Set TPA flags */
if (disable_tpa) {
bp->flags &= ~TPA_ENABLE_FLAG;
@@ -8925,8 +8756,6 @@
bp->tx_ring_size = MAX_TX_AVAIL;
- bp->rx_csum = 1;
-
/* make sure that the numbers are in the right granularity */
bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
@@ -9304,6 +9133,8 @@
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = bnx2x_ioctl,
.ndo_change_mtu = bnx2x_change_mtu,
+ .ndo_fix_features = bnx2x_fix_features,
+ .ndo_set_features = bnx2x_set_features,
.ndo_tx_timeout = bnx2x_tx_timeout,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = poll_bnx2x,
@@ -9430,20 +9261,20 @@
dev->netdev_ops = &bnx2x_netdev_ops;
bnx2x_set_ethtool_ops(dev);
- dev->features |= NETIF_F_SG;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
+ NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;
+
+ dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
+
+ dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
if (bp->flags & USING_DAC_FLAG)
dev->features |= NETIF_F_HIGHDMA;
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
- dev->features |= NETIF_F_TSO6;
- dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
- dev->vlan_features |= NETIF_F_SG;
- dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- if (bp->flags & USING_DAC_FLAG)
- dev->vlan_features |= NETIF_F_HIGHDMA;
- dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
- dev->vlan_features |= NETIF_F_TSO6;
+ /* Add Loopback capability to the device */
+ dev->hw_features |= NETIF_F_LOOPBACK;
#ifdef BCM_DCBNL
dev->dcbnl_ops = &bnx2x_dcbnl_ops;
@@ -10342,6 +10173,11 @@
break;
}
+ case DRV_CTL_ISCSI_STOPPED_CMD: {
+ bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_ISCSI_STOPPED);
+ break;
+ }
+
default:
BNX2X_ERR("unknown command %x\n", ctl->cmd);
rc = -EINVAL;
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1509a23..86bba25 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1,6 +1,6 @@
/* bnx2x_reg.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 3445ded..e535bfa 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -1,6 +1,6 @@
/* bnx2x_stats.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_stats.h b/drivers/net/bnx2x/bnx2x_stats.h
index 596798c..45d14d8 100644
--- a/drivers/net/bnx2x/bnx2x_stats.h
+++ b/drivers/net/bnx2x/bnx2x_stats.h
@@ -1,6 +1,6 @@
/* bnx2x_stats.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile
index 3c5c014..4c21bf6 100644
--- a/drivers/net/bonding/Makefile
+++ b/drivers/net/bonding/Makefile
@@ -9,6 +9,3 @@
proc-$(CONFIG_PROC_FS) += bond_procfs.o
bonding-objs += $(proc-y)
-ipv6-$(subst m,y,$(CONFIG_IPV6)) += bond_ipv6.o
-bonding-objs += $(ipv6-y)
-
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 494bf96..c7537abc 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -716,11 +716,9 @@
static u32 __get_agg_bandwidth(struct aggregator *aggregator)
{
u32 bandwidth = 0;
- u32 basic_speed;
if (aggregator->num_of_ports) {
- basic_speed = __get_link_speed(aggregator->lag_ports);
- switch (basic_speed) {
+ switch (__get_link_speed(aggregator->lag_ports)) {
case AD_LINK_SPEED_BITMASK_1MBPS:
bandwidth = aggregator->num_of_ports;
break;
@@ -1482,8 +1480,11 @@
static int agg_device_up(const struct aggregator *agg)
{
- return (netif_running(agg->slave->dev) &&
- netif_carrier_ok(agg->slave->dev));
+ struct port *port = agg->lag_ports;
+ if (!port)
+ return 0;
+ return (netif_running(port->slave->dev) &&
+ netif_carrier_ok(port->slave->dev));
}
/**
@@ -2402,14 +2403,6 @@
struct ad_info ad_info;
int res = 1;
- /* make sure that the slaves list will
- * not change during tx
- */
- read_lock(&bond->lock);
-
- if (!BOND_IS_OK(bond))
- goto out;
-
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n",
dev->name);
@@ -2463,39 +2456,20 @@
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
}
- read_unlock(&bond->lock);
+
return NETDEV_TX_OK;
}
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev)
+void bond_3ad_lacpdu_recv(struct sk_buff *skb, struct bonding *bond,
+ struct slave *slave)
{
- struct bonding *bond = netdev_priv(dev);
- struct slave *slave = NULL;
- int ret = NET_RX_DROP;
-
- if (!(dev->flags & IFF_MASTER))
- goto out;
-
- skb = skb_share_check(skb, GFP_ATOMIC);
- if (!skb)
- goto out;
+ if (skb->protocol != PKT_TYPE_LACPDU)
+ return;
if (!pskb_may_pull(skb, sizeof(struct lacpdu)))
- goto out;
+ return;
read_lock(&bond->lock);
- slave = bond_get_slave_by_dev(netdev_priv(dev), orig_dev);
- if (!slave)
- goto out_unlock;
-
bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len);
-
- ret = NET_RX_SUCCESS;
-
-out_unlock:
read_unlock(&bond->lock);
-out:
- dev_kfree_skb(skb);
-
- return ret;
}
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index b28baff..0ee3f16 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -39,7 +39,7 @@
typedef struct mac_addr {
u8 mac_addr_value[ETH_ALEN];
-} mac_addr_t;
+} __packed mac_addr_t;
enum {
BOND_AD_STABLE = 0,
@@ -134,12 +134,12 @@
u8 tlv_type_terminator; // = terminator
u8 terminator_length; // = 0
u8 reserved_50[50]; // = 0
-} lacpdu_t;
+} __packed lacpdu_t;
typedef struct lacpdu_header {
struct ethhdr hdr;
struct lacpdu lacpdu;
-} lacpdu_header_t;
+} __packed lacpdu_header_t;
// Marker Protocol Data Unit(PDU) structure(43.5.3.2 in the 802.3ad standard)
typedef struct bond_marker {
@@ -155,12 +155,12 @@
u8 tlv_type_terminator; // = 0x00
u8 terminator_length; // = 0x00
u8 reserved_90[90]; // = 0
-} bond_marker_t;
+} __packed bond_marker_t;
typedef struct bond_marker_header {
struct ethhdr hdr;
struct bond_marker marker;
-} bond_marker_header_t;
+} __packed bond_marker_header_t;
#pragma pack()
@@ -258,7 +258,6 @@
* requested
*/
struct timer_list ad_timer;
- struct packet_type ad_pkt_type;
};
struct ad_slave_info {
@@ -280,7 +279,8 @@
void bond_3ad_handle_link_change(struct slave *slave, char link);
int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev);
+void bond_3ad_lacpdu_recv(struct sk_buff *skb, struct bonding *bond,
+ struct slave *slave);
int bond_3ad_set_carrier(struct bonding *bond);
#endif //__BOND_3AD_H__
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index ba71582..8f2d2e7 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -308,49 +308,33 @@
_unlock_rx_hashtbl(bond);
}
-static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct packet_type *ptype, struct net_device *orig_dev)
+static void rlb_arp_recv(struct sk_buff *skb, struct bonding *bond,
+ struct slave *slave)
{
- struct bonding *bond;
- struct arp_pkt *arp = (struct arp_pkt *)skb->data;
- int res = NET_RX_DROP;
+ struct arp_pkt *arp;
- while (bond_dev->priv_flags & IFF_802_1Q_VLAN)
- bond_dev = vlan_dev_real_dev(bond_dev);
+ if (skb->protocol != cpu_to_be16(ETH_P_ARP))
+ return;
- if (!(bond_dev->priv_flags & IFF_BONDING) ||
- !(bond_dev->flags & IFF_MASTER))
- goto out;
-
+ arp = (struct arp_pkt *) skb->data;
if (!arp) {
pr_debug("Packet has no ARP data\n");
- goto out;
+ return;
}
- skb = skb_share_check(skb, GFP_ATOMIC);
- if (!skb)
- goto out;
-
- if (!pskb_may_pull(skb, arp_hdr_len(bond_dev)))
- goto out;
+ if (!pskb_may_pull(skb, arp_hdr_len(bond->dev)))
+ return;
if (skb->len < sizeof(struct arp_pkt)) {
pr_debug("Packet is too small to be an ARP\n");
- goto out;
+ return;
}
if (arp->op_code == htons(ARPOP_REPLY)) {
/* update rx hash table for this ARP */
- bond = netdev_priv(bond_dev);
rlb_update_entry_from_arp(bond, arp);
pr_debug("Server received an ARP Reply from client\n");
}
-
- res = NET_RX_SUCCESS;
-
-out:
- dev_kfree_skb(skb);
-
- return res;
}
/* Caller must hold bond lock for read */
@@ -759,7 +743,6 @@
static int rlb_initialize(struct bonding *bond)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
- struct packet_type *pk_type = &(BOND_ALB_INFO(bond).rlb_pkt_type);
struct rlb_client_info *new_hashtbl;
int size = RLB_HASH_TABLE_SIZE * sizeof(struct rlb_client_info);
int i;
@@ -784,13 +767,8 @@
_unlock_rx_hashtbl(bond);
- /*initialize packet type*/
- pk_type->type = cpu_to_be16(ETH_P_ARP);
- pk_type->dev = bond->dev;
- pk_type->func = rlb_arp_recv;
-
/* register to receive ARPs */
- dev_add_pack(pk_type);
+ bond->recv_probe = rlb_arp_recv;
return 0;
}
@@ -799,8 +777,6 @@
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
- dev_remove_pack(&(bond_info->rlb_pkt_type));
-
_lock_rx_hashtbl(bond);
kfree(bond_info->rx_hashtbl);
@@ -1249,16 +1225,10 @@
skb_reset_mac_header(skb);
eth_data = eth_hdr(skb);
- /* make sure that the curr_active_slave and the slaves list do
- * not change during tx
+ /* make sure that the curr_active_slave do not change during tx
*/
- read_lock(&bond->lock);
read_lock(&bond->curr_slave_lock);
- if (!BOND_IS_OK(bond)) {
- goto out;
- }
-
switch (ntohs(skb->protocol)) {
case ETH_P_IP: {
const struct iphdr *iph = ip_hdr(skb);
@@ -1358,13 +1328,12 @@
}
}
-out:
if (res) {
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
}
read_unlock(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
+
return NETDEV_TX_OK;
}
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index 8ca7158..90f140a 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -129,7 +129,6 @@
int lp_counter;
/* -------- rlb parameters -------- */
int rlb_enabled;
- struct packet_type rlb_pkt_type;
struct rlb_client_info *rx_hashtbl; /* Receive hash table */
spinlock_t rx_hashtbl_lock;
u32 rx_hashtbl_head;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 16d6fe9..088fd84 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -89,8 +89,7 @@
static int max_bonds = BOND_DEFAULT_MAX_BONDS;
static int tx_queues = BOND_DEFAULT_TX_QUEUES;
-static int num_grat_arp = 1;
-static int num_unsol_na = 1;
+static int num_peer_notif = 1;
static int miimon = BOND_LINK_MON_INTERV;
static int updelay;
static int downdelay;
@@ -113,10 +112,10 @@
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
module_param(tx_queues, int, 0);
MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
-module_param(num_grat_arp, int, 0644);
-MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event");
-module_param(num_unsol_na, int, 0644);
-MODULE_PARM_DESC(num_unsol_na, "Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event");
+module_param_named(num_grat_arp, num_peer_notif, int, 0644);
+MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on failover event (alias of num_unsol_na)");
+module_param_named(num_unsol_na, num_peer_notif, int, 0644);
+MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on failover event (alias of num_grat_arp)");
module_param(miimon, int, 0);
MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
@@ -234,7 +233,6 @@
/*-------------------------- Forward declarations ---------------------------*/
-static void bond_send_gratuitous_arp(struct bonding *bond);
static int bond_init(struct net_device *bond_dev);
static void bond_uninit(struct net_device *bond_dev);
@@ -346,32 +344,6 @@
}
/**
- * bond_has_challenged_slaves
- * @bond: the bond we're working on
- *
- * Searches the slave list. Returns 1 if a vlan challenged slave
- * was found, 0 otherwise.
- *
- * Assumes bond->lock is held.
- */
-static int bond_has_challenged_slaves(struct bonding *bond)
-{
- struct slave *slave;
- int i;
-
- bond_for_each_slave(bond, slave, i) {
- if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
- pr_debug("found VLAN challenged slave - %s\n",
- slave->dev->name);
- return 1;
- }
- }
-
- pr_debug("no VLAN challenged slaves found\n");
- return 0;
-}
-
-/**
* bond_next_vlan - safely skip to the next item in the vlans list.
* @bond: the bond we're working on
* @curr: item we're advancing from
@@ -631,7 +603,8 @@
static int bond_update_speed_duplex(struct slave *slave)
{
struct net_device *slave_dev = slave->dev;
- struct ethtool_cmd etool;
+ struct ethtool_cmd etool = { .cmd = ETHTOOL_GSET };
+ u32 slave_speed;
int res;
/* Fake speed and duplex */
@@ -645,7 +618,8 @@
if (res < 0)
return -1;
- switch (etool.speed) {
+ slave_speed = ethtool_cmd_speed(&etool);
+ switch (slave_speed) {
case SPEED_10:
case SPEED_100:
case SPEED_1000:
@@ -663,7 +637,7 @@
return -1;
}
- slave->speed = etool.speed;
+ slave->speed = slave_speed;
slave->duplex = etool.duplex;
return 0;
@@ -1087,6 +1061,21 @@
return bestslave;
}
+static bool bond_should_notify_peers(struct bonding *bond)
+{
+ struct slave *slave = bond->curr_active_slave;
+
+ pr_debug("bond_should_notify_peers: bond %s slave %s\n",
+ bond->dev->name, slave ? slave->dev->name : "NULL");
+
+ if (!slave || !bond->send_peer_notif ||
+ test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
+ return false;
+
+ bond->send_peer_notif--;
+ return true;
+}
+
/**
* change_active_interface - change the active slave into the specified one
* @bond: our bonding struct
@@ -1154,6 +1143,8 @@
bond_set_slave_inactive_flags(old_active);
if (new_active) {
+ bool should_notify_peers = false;
+
bond_set_slave_active_flags(new_active);
if (bond->params.fail_over_mac)
@@ -1161,17 +1152,19 @@
old_active);
if (netif_running(bond->dev)) {
- bond->send_grat_arp = bond->params.num_grat_arp;
- bond_send_gratuitous_arp(bond);
-
- bond->send_unsol_na = bond->params.num_unsol_na;
- bond_send_unsolicited_na(bond);
+ bond->send_peer_notif =
+ bond->params.num_peer_notif;
+ should_notify_peers =
+ bond_should_notify_peers(bond);
}
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
+ if (should_notify_peers)
+ netdev_bonding_change(bond->dev,
+ NETDEV_NOTIFY_PEERS);
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
@@ -1387,52 +1380,68 @@
return 0;
}
-#define BOND_VLAN_FEATURES \
- (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
- NETIF_F_HW_VLAN_FILTER)
+static u32 bond_fix_features(struct net_device *dev, u32 features)
+{
+ struct slave *slave;
+ struct bonding *bond = netdev_priv(dev);
+ u32 mask;
+ int i;
-/*
- * Compute the common dev->feature set available to all slaves. Some
- * feature bits are managed elsewhere, so preserve those feature bits
- * on the master device.
- */
-static int bond_compute_features(struct bonding *bond)
+ read_lock(&bond->lock);
+
+ if (!bond->first_slave) {
+ /* Disable adding VLANs to empty bond. But why? --mq */
+ features |= NETIF_F_VLAN_CHALLENGED;
+ goto out;
+ }
+
+ mask = features;
+ features &= ~NETIF_F_ONE_FOR_ALL;
+ features |= NETIF_F_ALL_FOR_ALL;
+
+ bond_for_each_slave(bond, slave, i) {
+ features = netdev_increment_features(features,
+ slave->dev->features,
+ mask);
+ }
+
+out:
+ read_unlock(&bond->lock);
+ return features;
+}
+
+#define BOND_VLAN_FEATURES (NETIF_F_ALL_TX_OFFLOADS | \
+ NETIF_F_SOFT_FEATURES | \
+ NETIF_F_LRO)
+
+static void bond_compute_features(struct bonding *bond)
{
struct slave *slave;
struct net_device *bond_dev = bond->dev;
- u32 features = bond_dev->features;
- u32 vlan_features = 0;
- unsigned short max_hard_header_len = max((u16)ETH_HLEN,
- bond_dev->hard_header_len);
+ u32 vlan_features = BOND_VLAN_FEATURES;
+ unsigned short max_hard_header_len = ETH_HLEN;
int i;
- features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
- features |= NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
+ read_lock(&bond->lock);
if (!bond->first_slave)
goto done;
- features &= ~NETIF_F_ONE_FOR_ALL;
-
- vlan_features = bond->first_slave->dev->vlan_features;
bond_for_each_slave(bond, slave, i) {
- features = netdev_increment_features(features,
- slave->dev->features,
- NETIF_F_ONE_FOR_ALL);
vlan_features = netdev_increment_features(vlan_features,
- slave->dev->vlan_features,
- NETIF_F_ONE_FOR_ALL);
+ slave->dev->vlan_features, BOND_VLAN_FEATURES);
+
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
}
done:
- features |= (bond_dev->features & BOND_VLAN_FEATURES);
- bond_dev->features = netdev_fix_features(bond_dev, features);
- bond_dev->vlan_features = netdev_fix_features(bond_dev, vlan_features);
+ bond_dev->vlan_features = vlan_features;
bond_dev->hard_header_len = max_hard_header_len;
- return 0;
+ read_unlock(&bond->lock);
+
+ netdev_change_features(bond_dev);
}
static void bond_setup_by_slave(struct net_device *bond_dev,
@@ -1452,27 +1461,17 @@
}
/* On bonding slaves other than the currently active slave, suppress
- * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and
- * ARP on active-backup slaves with arp_validate enabled.
+ * duplicates except for alb non-mcast/bcast.
*/
static bool bond_should_deliver_exact_match(struct sk_buff *skb,
struct slave *slave,
struct bonding *bond)
{
if (bond_is_slave_inactive(slave)) {
- if (slave_do_arp_validate(bond, slave) &&
- skb->protocol == __cpu_to_be16(ETH_P_ARP))
- return false;
-
if (bond->params.mode == BOND_MODE_ALB &&
skb->pkt_type != PACKET_BROADCAST &&
skb->pkt_type != PACKET_MULTICAST)
- return false;
-
- if (bond->params.mode == BOND_MODE_8023AD &&
- skb->protocol == __cpu_to_be16(ETH_P_SLOW))
return false;
-
return true;
}
return false;
@@ -1496,6 +1495,15 @@
if (bond->params.arp_interval)
slave->dev->last_rx = jiffies;
+ if (bond->recv_probe) {
+ struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+
+ if (likely(nskb)) {
+ bond->recv_probe(nskb, bond, slave);
+ dev_kfree_skb(nskb);
+ }
+ }
+
if (bond_should_deliver_exact_match(skb, slave, bond)) {
return RX_HANDLER_EXACT;
}
@@ -1526,7 +1534,6 @@
struct netdev_hw_addr *ha;
struct sockaddr addr;
int link_reporting;
- int old_features = bond_dev->features;
int res = 0;
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
@@ -1559,16 +1566,9 @@
pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
bond_dev->name, slave_dev->name,
slave_dev->name, bond_dev->name);
- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
} else {
pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
- if (bond->slave_cnt == 0) {
- /* First slave, and it is not VLAN challenged,
- * so remove the block of adding VLANs over the bond.
- */
- bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
- }
}
/*
@@ -1757,10 +1757,10 @@
new_slave->delay = 0;
new_slave->link_failure_count = 0;
- bond_compute_features(bond);
-
write_unlock_bh(&bond->lock);
+ bond_compute_features(bond);
+
read_lock(&bond->lock);
new_slave->last_arp_rx = jiffies;
@@ -1940,7 +1940,7 @@
kfree(new_slave);
err_undo_flags:
- bond_dev->features = old_features;
+ bond_compute_features(bond);
return res;
}
@@ -1961,6 +1961,7 @@
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *oldcurrent;
struct sockaddr addr;
+ u32 old_features = bond_dev->features;
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
@@ -2021,8 +2022,6 @@
/* release the slave from its bond */
bond_detach_slave(bond, slave);
- bond_compute_features(bond);
-
if (bond->primary_slave == slave)
bond->primary_slave = NULL;
@@ -2066,24 +2065,23 @@
*/
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
- if (!bond->vlgrp) {
- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
- } else {
+ if (bond->vlgrp) {
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
bond_dev->name, bond_dev->name);
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
bond_dev->name);
}
- } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
- !bond_has_challenged_slaves(bond)) {
- pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
- bond_dev->name, slave_dev->name, bond_dev->name);
- bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
+ bond_compute_features(bond);
+ if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
+ (old_features & NETIF_F_VLAN_CHALLENGED))
+ pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
+ bond_dev->name, slave_dev->name, bond_dev->name);
+
/* must do this from outside any spinlocks */
bond_destroy_slave_symlinks(bond_dev, slave_dev);
@@ -2201,8 +2199,6 @@
bond_alb_deinit_slave(bond, slave);
}
- bond_compute_features(bond);
-
bond_destroy_slave_symlinks(bond_dev, slave_dev);
bond_del_vlans_from_slave(bond, slave_dev);
@@ -2251,9 +2247,7 @@
*/
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
- if (!bond->vlgrp) {
- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
- } else {
+ if (bond->vlgrp) {
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
bond_dev->name, bond_dev->name);
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
@@ -2264,6 +2258,9 @@
out:
write_unlock_bh(&bond->lock);
+
+ bond_compute_features(bond);
+
return 0;
}
@@ -2493,7 +2490,7 @@
bond_update_speed_duplex(slave);
- pr_info("%s: link status definitely up for interface %s, %d Mbps %s duplex.\n",
+ pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
bond->dev->name, slave->dev->name,
slave->speed, slave->duplex ? "full" : "half");
@@ -2570,6 +2567,7 @@
{
struct bonding *bond = container_of(work, struct bonding,
mii_work.work);
+ bool should_notify_peers = false;
read_lock(&bond->lock);
if (bond->kill_timers)
@@ -2578,17 +2576,7 @@
if (bond->slave_cnt == 0)
goto re_arm;
- if (bond->send_grat_arp) {
- read_lock(&bond->curr_slave_lock);
- bond_send_gratuitous_arp(bond);
- read_unlock(&bond->curr_slave_lock);
- }
-
- if (bond->send_unsol_na) {
- read_lock(&bond->curr_slave_lock);
- bond_send_unsolicited_na(bond);
- read_unlock(&bond->curr_slave_lock);
- }
+ should_notify_peers = bond_should_notify_peers(bond);
if (bond_miimon_inspect(bond)) {
read_unlock(&bond->lock);
@@ -2608,6 +2596,12 @@
msecs_to_jiffies(bond->params.miimon));
out:
read_unlock(&bond->lock);
+
+ if (should_notify_peers) {
+ rtnl_lock();
+ netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
+ rtnl_unlock();
+ }
}
static __be32 bond_glean_dev_ip(struct net_device *dev)
@@ -2751,44 +2745,6 @@
}
}
-/*
- * Kick out a gratuitous ARP for an IP on the bonding master plus one
- * for each VLAN above us.
- *
- * Caller must hold curr_slave_lock for read or better
- */
-static void bond_send_gratuitous_arp(struct bonding *bond)
-{
- struct slave *slave = bond->curr_active_slave;
- struct vlan_entry *vlan;
- struct net_device *vlan_dev;
-
- pr_debug("bond_send_grat_arp: bond %s slave %s\n",
- bond->dev->name, slave ? slave->dev->name : "NULL");
-
- if (!slave || !bond->send_grat_arp ||
- test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
- return;
-
- bond->send_grat_arp--;
-
- if (bond->master_ip) {
- bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip,
- bond->master_ip, 0);
- }
-
- if (!bond->vlgrp)
- return;
-
- list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
- vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
- if (vlan->vlan_ip) {
- bond_arp_send(slave->dev, ARPOP_REPLY, vlan->vlan_ip,
- vlan->vlan_ip, vlan->vlan_id);
- }
- }
-}
-
static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
{
int i;
@@ -2806,48 +2762,26 @@
}
}
-static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static void bond_arp_rcv(struct sk_buff *skb, struct bonding *bond,
+ struct slave *slave)
{
struct arphdr *arp;
- struct slave *slave;
- struct bonding *bond;
unsigned char *arp_ptr;
__be32 sip, tip;
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /*
- * When using VLANS and bonding, dev and oriv_dev may be
- * incorrect if the physical interface supports VLAN
- * acceleration. With this change ARP validation now
- * works for hosts only reachable on the VLAN interface.
- */
- dev = vlan_dev_real_dev(dev);
- orig_dev = dev_get_by_index_rcu(dev_net(skb->dev),skb->skb_iif);
- }
+ if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
+ return;
- if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
- goto out;
-
- bond = netdev_priv(dev);
read_lock(&bond->lock);
- pr_debug("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n",
- bond->dev->name, skb->dev ? skb->dev->name : "NULL",
- orig_dev ? orig_dev->name : "NULL");
+ pr_debug("bond_arp_rcv: bond %s skb->dev %s\n",
+ bond->dev->name, skb->dev->name);
- slave = bond_get_slave_by_dev(bond, orig_dev);
- if (!slave || !slave_do_arp_validate(bond, slave))
- goto out_unlock;
-
- skb = skb_share_check(skb, GFP_ATOMIC);
- if (!skb)
- goto out_unlock;
-
- if (!pskb_may_pull(skb, arp_hdr_len(dev)))
+ if (!pskb_may_pull(skb, arp_hdr_len(bond->dev)))
goto out_unlock;
arp = arp_hdr(skb);
- if (arp->ar_hln != dev->addr_len ||
+ if (arp->ar_hln != bond->dev->addr_len ||
skb->pkt_type == PACKET_OTHERHOST ||
skb->pkt_type == PACKET_LOOPBACK ||
arp->ar_hrd != htons(ARPHRD_ETHER) ||
@@ -2856,9 +2790,9 @@
goto out_unlock;
arp_ptr = (unsigned char *)(arp + 1);
- arp_ptr += dev->addr_len;
+ arp_ptr += bond->dev->addr_len;
memcpy(&sip, arp_ptr, 4);
- arp_ptr += 4 + dev->addr_len;
+ arp_ptr += 4 + bond->dev->addr_len;
memcpy(&tip, arp_ptr, 4);
pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
@@ -2881,9 +2815,6 @@
out_unlock:
read_unlock(&bond->lock);
-out:
- dev_kfree_skb(skb);
- return NET_RX_SUCCESS;
}
/*
@@ -3243,6 +3174,7 @@
{
struct bonding *bond = container_of(work, struct bonding,
arp_work.work);
+ bool should_notify_peers = false;
int delta_in_ticks;
read_lock(&bond->lock);
@@ -3255,17 +3187,7 @@
if (bond->slave_cnt == 0)
goto re_arm;
- if (bond->send_grat_arp) {
- read_lock(&bond->curr_slave_lock);
- bond_send_gratuitous_arp(bond);
- read_unlock(&bond->curr_slave_lock);
- }
-
- if (bond->send_unsol_na) {
- read_lock(&bond->curr_slave_lock);
- bond_send_unsolicited_na(bond);
- read_unlock(&bond->curr_slave_lock);
- }
+ should_notify_peers = bond_should_notify_peers(bond);
if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
read_unlock(&bond->lock);
@@ -3286,6 +3208,12 @@
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
out:
read_unlock(&bond->lock);
+
+ if (should_notify_peers) {
+ rtnl_lock();
+ netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
+ rtnl_unlock();
+ }
}
/*-------------------------- netdev event handling --------------------------*/
@@ -3339,8 +3267,8 @@
slave = bond_get_slave_by_dev(bond, slave_dev);
if (slave) {
- u16 old_speed = slave->speed;
- u16 old_duplex = slave->duplex;
+ u32 old_speed = slave->speed;
+ u8 old_duplex = slave->duplex;
bond_update_speed_duplex(slave);
@@ -3482,48 +3410,6 @@
.notifier_call = bond_inetaddr_event,
};
-/*-------------------------- Packet type handling ---------------------------*/
-
-/* register to receive lacpdus on a bond */
-static void bond_register_lacpdu(struct bonding *bond)
-{
- struct packet_type *pk_type = &(BOND_AD_INFO(bond).ad_pkt_type);
-
- /* initialize packet type */
- pk_type->type = PKT_TYPE_LACPDU;
- pk_type->dev = bond->dev;
- pk_type->func = bond_3ad_lacpdu_recv;
-
- dev_add_pack(pk_type);
-}
-
-/* unregister to receive lacpdus on a bond */
-static void bond_unregister_lacpdu(struct bonding *bond)
-{
- dev_remove_pack(&(BOND_AD_INFO(bond).ad_pkt_type));
-}
-
-void bond_register_arp(struct bonding *bond)
-{
- struct packet_type *pt = &bond->arp_mon_pt;
-
- if (pt->type)
- return;
-
- pt->type = htons(ETH_P_ARP);
- pt->dev = bond->dev;
- pt->func = bond_arp_rcv;
- dev_add_pack(pt);
-}
-
-void bond_unregister_arp(struct bonding *bond)
-{
- struct packet_type *pt = &bond->arp_mon_pt;
-
- dev_remove_pack(pt);
- pt->type = 0;
-}
-
/*---------------------------- Hashing Policies -----------------------------*/
/*
@@ -3617,14 +3503,14 @@
queue_delayed_work(bond->wq, &bond->arp_work, 0);
if (bond->params.arp_validate)
- bond_register_arp(bond);
+ bond->recv_probe = bond_arp_rcv;
}
if (bond->params.mode == BOND_MODE_8023AD) {
INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
queue_delayed_work(bond->wq, &bond->ad_work, 0);
/* register to receive LACPDUs */
- bond_register_lacpdu(bond);
+ bond->recv_probe = bond_3ad_lacpdu_recv;
bond_3ad_initiate_agg_selection(bond, 1);
}
@@ -3635,18 +3521,9 @@
{
struct bonding *bond = netdev_priv(bond_dev);
- if (bond->params.mode == BOND_MODE_8023AD) {
- /* Unregister the receive of LACPDUs */
- bond_unregister_lacpdu(bond);
- }
-
- if (bond->params.arp_validate)
- bond_unregister_arp(bond);
-
write_lock_bh(&bond->lock);
- bond->send_grat_arp = 0;
- bond->send_unsol_na = 0;
+ bond->send_peer_notif = 0;
/* signal timers not to re-arm */
bond->kill_timers = 1;
@@ -3682,6 +3559,7 @@
*/
bond_alb_deinitialize(bond);
}
+ bond->recv_probe = NULL;
return 0;
}
@@ -4105,10 +3983,6 @@
int i, slave_no, res = 1;
struct iphdr *iph = ip_hdr(skb);
- read_lock(&bond->lock);
-
- if (!BOND_IS_OK(bond))
- goto out;
/*
* Start with the curr_active_slave that joined the bond as the
* default for sending IGMP traffic. For failover purposes one
@@ -4155,7 +4029,7 @@
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
}
- read_unlock(&bond->lock);
+
return NETDEV_TX_OK;
}
@@ -4169,24 +4043,18 @@
struct bonding *bond = netdev_priv(bond_dev);
int res = 1;
- read_lock(&bond->lock);
read_lock(&bond->curr_slave_lock);
- if (!BOND_IS_OK(bond))
- goto out;
+ if (bond->curr_active_slave)
+ res = bond_dev_queue_xmit(bond, skb,
+ bond->curr_active_slave->dev);
- if (!bond->curr_active_slave)
- goto out;
-
- res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
-
-out:
if (res)
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
read_unlock(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
+
return NETDEV_TX_OK;
}
@@ -4203,11 +4071,6 @@
int i;
int res = 1;
- read_lock(&bond->lock);
-
- if (!BOND_IS_OK(bond))
- goto out;
-
slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
bond_for_each_slave(bond, slave, i) {
@@ -4227,12 +4090,11 @@
}
}
-out:
if (res) {
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
}
- read_unlock(&bond->lock);
+
return NETDEV_TX_OK;
}
@@ -4247,11 +4109,6 @@
int i;
int res = 1;
- read_lock(&bond->lock);
-
- if (!BOND_IS_OK(bond))
- goto out;
-
read_lock(&bond->curr_slave_lock);
start_at = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
@@ -4290,7 +4147,6 @@
dev_kfree_skb(skb);
/* frame sent to all suitable interfaces */
- read_unlock(&bond->lock);
return NETDEV_TX_OK;
}
@@ -4322,10 +4178,8 @@
struct slave *slave = NULL;
struct slave *check_slave;
- read_lock(&bond->lock);
-
- if (!BOND_IS_OK(bond) || !skb->queue_mapping)
- goto out;
+ if (!skb->queue_mapping)
+ return 1;
/* Find out if any slaves have the same mapping as this skb. */
bond_for_each_slave(bond, check_slave, i) {
@@ -4341,8 +4195,6 @@
res = bond_dev_queue_xmit(bond, skb, slave->dev);
}
-out:
- read_unlock(&bond->lock);
return res;
}
@@ -4357,24 +4209,17 @@
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
if (unlikely(txq >= dev->real_num_tx_queues)) {
- do
+ do {
txq -= dev->real_num_tx_queues;
- while (txq >= dev->real_num_tx_queues);
+ } while (txq >= dev->real_num_tx_queues);
}
return txq;
}
-static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
- /*
- * If we risk deadlock from transmitting this in the
- * netpoll path, tell netpoll to queue the frame for later tx
- */
- if (is_netpoll_tx_blocked(dev))
- return NETDEV_TX_BUSY;
-
if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
if (!bond_slave_override(bond, skb))
return NETDEV_TX_OK;
@@ -4404,6 +4249,29 @@
}
}
+static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct bonding *bond = netdev_priv(dev);
+ netdev_tx_t ret = NETDEV_TX_OK;
+
+ /*
+ * If we risk deadlock from transmitting this in the
+ * netpoll path, tell netpoll to queue the frame for later tx
+ */
+ if (is_netpoll_tx_blocked(dev))
+ return NETDEV_TX_BUSY;
+
+ read_lock(&bond->lock);
+
+ if (bond->slave_cnt)
+ ret = __bond_start_xmit(skb, dev);
+ else
+ dev_kfree_skb(skb);
+
+ read_unlock(&bond->lock);
+
+ return ret;
+}
/*
* set bond mode specific net device operations
@@ -4448,11 +4316,6 @@
static const struct ethtool_ops bond_ethtool_ops = {
.get_drvinfo = bond_ethtool_get_drvinfo,
.get_link = ethtool_op_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .get_tso = ethtool_op_get_tso,
- .get_ufo = ethtool_op_get_ufo,
- .get_flags = ethtool_op_get_flags,
};
static const struct net_device_ops bond_netdev_ops = {
@@ -4478,6 +4341,7 @@
#endif
.ndo_add_slave = bond_enslave,
.ndo_del_slave = bond_release,
+ .ndo_fix_features = bond_fix_features,
};
static void bond_destructor(struct net_device *bond_dev)
@@ -4533,14 +4397,14 @@
* when there are slaves that are not hw accel
* capable
*/
- bond_dev->features |= (NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER);
- /* By default, we enable GRO on bonding devices.
- * Actual support requires lowlevel drivers are GRO ready.
- */
- bond_dev->features |= NETIF_F_GRO;
+ bond_dev->hw_features = BOND_VLAN_FEATURES |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM);
+ bond_dev->features |= bond_dev->hw_features;
}
static void bond_work_cancel_all(struct bonding *bond)
@@ -4724,16 +4588,10 @@
use_carrier = 1;
}
- if (num_grat_arp < 0 || num_grat_arp > 255) {
- pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1\n",
- num_grat_arp);
- num_grat_arp = 1;
- }
-
- if (num_unsol_na < 0 || num_unsol_na > 255) {
- pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
- num_unsol_na);
- num_unsol_na = 1;
+ if (num_peer_notif < 0 || num_peer_notif > 255) {
+ pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
+ num_peer_notif);
+ num_peer_notif = 1;
}
/* reset values for 802.3ad */
@@ -4925,8 +4783,7 @@
params->mode = bond_mode;
params->xmit_policy = xmit_hashtype;
params->miimon = miimon;
- params->num_grat_arp = num_grat_arp;
- params->num_unsol_na = num_unsol_na;
+ params->num_peer_notif = num_peer_notif;
params->arp_interval = arp_interval;
params->arp_validate = arp_validate_value;
params->updelay = updelay;
@@ -5025,8 +4882,9 @@
rtnl_lock();
- bond_dev = alloc_netdev_mq(sizeof(struct bonding), name ? name : "",
- bond_setup, tx_queues);
+ bond_dev = alloc_netdev_mq(sizeof(struct bonding),
+ name ? name : "bond%d",
+ bond_setup, tx_queues);
if (!bond_dev) {
pr_err("%s: eek! can't alloc netdev!\n", name);
rtnl_unlock();
@@ -5036,26 +4894,10 @@
dev_net_set(bond_dev, net);
bond_dev->rtnl_link_ops = &bond_link_ops;
- if (!name) {
- res = dev_alloc_name(bond_dev, "bond%d");
- if (res < 0)
- goto out;
- } else {
- /*
- * If we're given a name to register
- * we need to ensure that its not already
- * registered
- */
- res = -EEXIST;
- if (__dev_get_by_name(net, name) != NULL)
- goto out;
- }
-
res = register_netdevice(bond_dev);
netif_carrier_off(bond_dev);
-out:
rtnl_unlock();
if (res < 0)
bond_destructor(bond_dev);
@@ -5121,7 +4963,6 @@
register_netdevice_notifier(&bond_netdev_notifier);
register_inetaddr_notifier(&bond_inetaddr_notifier);
- bond_register_ipv6_notifier();
out:
return res;
err:
@@ -5136,7 +4977,6 @@
{
unregister_netdevice_notifier(&bond_netdev_notifier);
unregister_inetaddr_notifier(&bond_inetaddr_notifier);
- bond_unregister_ipv6_notifier();
bond_destroy_sysfs();
bond_destroy_debugfs();
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index c32ff55..c97307d 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -4,8 +4,6 @@
#include "bonding.h"
-extern const char *bond_mode_name(int mode);
-
static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(RCU)
__acquires(&bond->lock)
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index de87aea..4059bfc 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -422,11 +422,6 @@
bond->dev->name, arp_validate_tbl[new_value].modename,
new_value);
- if (!bond->params.arp_validate && new_value)
- bond_register_arp(bond);
- else if (bond->params.arp_validate && !new_value)
- bond_unregister_arp(bond);
-
bond->params.arp_validate = new_value;
return count;
@@ -874,82 +869,28 @@
bonding_show_ad_select, bonding_store_ad_select);
/*
- * Show and set the number of grat ARP to send after a failover event.
+ * Show and set the number of peer notifications to send after a failover event.
*/
-static ssize_t bonding_show_n_grat_arp(struct device *d,
- struct device_attribute *attr,
- char *buf)
+static ssize_t bonding_show_num_peer_notif(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
struct bonding *bond = to_bond(d);
-
- return sprintf(buf, "%d\n", bond->params.num_grat_arp);
+ return sprintf(buf, "%d\n", bond->params.num_peer_notif);
}
-static ssize_t bonding_store_n_grat_arp(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t bonding_store_num_peer_notif(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- int new_value, ret = count;
struct bonding *bond = to_bond(d);
-
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no num_grat_arp value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
- if (new_value < 0 || new_value > 255) {
- pr_err("%s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
- bond->dev->name, new_value);
- ret = -EINVAL;
- goto out;
- } else {
- bond->params.num_grat_arp = new_value;
- }
-out:
- return ret;
+ int err = kstrtou8(buf, 10, &bond->params.num_peer_notif);
+ return err ? err : count;
}
static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR,
- bonding_show_n_grat_arp, bonding_store_n_grat_arp);
-
-/*
- * Show and set the number of unsolicited NA's to send after a failover event.
- */
-static ssize_t bonding_show_n_unsol_na(struct device *d,
- struct device_attribute *attr,
- char *buf)
-{
- struct bonding *bond = to_bond(d);
-
- return sprintf(buf, "%d\n", bond->params.num_unsol_na);
-}
-
-static ssize_t bonding_store_n_unsol_na(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int new_value, ret = count;
- struct bonding *bond = to_bond(d);
-
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no num_unsol_na value specified.\n",
- bond->dev->name);
- ret = -EINVAL;
- goto out;
- }
-
- if (new_value < 0 || new_value > 255) {
- pr_err("%s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
- bond->dev->name, new_value);
- ret = -EINVAL;
- goto out;
- } else
- bond->params.num_unsol_na = new_value;
-out:
- return ret;
-}
+ bonding_show_num_peer_notif, bonding_store_num_peer_notif);
static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR,
- bonding_show_n_unsol_na, bonding_store_n_unsol_na);
+ bonding_show_num_peer_notif, bonding_store_num_peer_notif);
/*
* Show and set the MII monitor interval. There are two tricky bits
@@ -1001,7 +942,6 @@
bond->dev->name);
bond->params.arp_interval = 0;
if (bond->params.arp_validate) {
- bond_unregister_arp(bond);
bond->params.arp_validate =
BOND_ARP_VALIDATE_NONE;
}
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 90736cb..ea1d005 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -24,8 +24,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.7.0"
-#define DRV_RELDATE "June 2, 2010"
+#define DRV_VERSION "3.7.1"
+#define DRV_RELDATE "April 27, 2011"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
@@ -39,16 +39,6 @@
netif_carrier_ok(dev))
/*
- * Checks whether bond is ready for transmit.
- *
- * Caller must hold bond->lock
- */
-#define BOND_IS_OK(bond) \
- (((bond)->dev->flags & IFF_UP) && \
- netif_running((bond)->dev) && \
- ((bond)->slave_cnt > 0))
-
-/*
* Checks whether slave is ready for transmit.
*/
#define SLAVE_IS_OK(slave) \
@@ -149,8 +139,7 @@
int mode;
int xmit_policy;
int miimon;
- int num_grat_arp;
- int num_unsol_na;
+ u8 num_peer_notif;
int arp_interval;
int arp_validate;
int use_carrier;
@@ -178,9 +167,6 @@
struct list_head vlan_list;
__be32 vlan_ip;
unsigned short vlan_id;
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
- struct in6_addr vlan_ipv6;
-#endif
};
struct slave {
@@ -196,12 +182,12 @@
u8 backup:1, /* indicates backup slave. Value corresponds with
BOND_STATE_ACTIVE and BOND_STATE_BACKUP */
inactive:1; /* indicates inactive slave */
+ u8 duplex;
u32 original_mtu;
u32 link_failure_count;
- u8 perm_hwaddr[ETH_ALEN];
- u16 speed;
- u8 duplex;
+ u32 speed;
u16 queue_id;
+ u8 perm_hwaddr[ETH_ALEN];
struct ad_slave_info ad_info; /* HUGE - better to dynamically alloc */
struct tlb_slave_info tlb_info;
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -231,11 +217,12 @@
struct slave *primary_slave;
bool force_primary;
s32 slave_cnt; /* never change this value outside the attach/detach wrappers */
+ void (*recv_probe)(struct sk_buff *, struct bonding *,
+ struct slave *);
rwlock_t lock;
rwlock_t curr_slave_lock;
s8 kill_timers;
- s8 send_grat_arp;
- s8 send_unsol_na;
+ u8 send_peer_notif;
s8 setup_by_slave;
s8 igmp_retrans;
#ifdef CONFIG_PROC_FS
@@ -260,9 +247,6 @@
struct delayed_work alb_work;
struct delayed_work ad_work;
struct delayed_work mcast_work;
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
- struct in6_addr master_ipv6;
-#endif
#ifdef CONFIG_DEBUG_FS
/* debugging suport via debugfs */
struct dentry *debug_dir;
@@ -409,13 +393,12 @@
int bond_parse_parm(const char *mode_arg, const struct bond_parm_tbl *tbl);
void bond_select_active_slave(struct bonding *bond);
void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
-void bond_register_arp(struct bonding *);
-void bond_unregister_arp(struct bonding *);
void bond_create_debugfs(void);
void bond_destroy_debugfs(void);
void bond_debug_register(struct bonding *bond);
void bond_debug_unregister(struct bonding *bond);
void bond_debug_reregister(struct bonding *bond);
+const char *bond_mode_name(int mode);
struct bond_net {
struct net * net; /* Associated network namespace */
@@ -459,23 +442,4 @@
extern const struct bond_parm_tbl pri_reselect_tbl[];
extern struct bond_parm_tbl ad_select_tbl[];
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-void bond_send_unsolicited_na(struct bonding *bond);
-void bond_register_ipv6_notifier(void);
-void bond_unregister_ipv6_notifier(void);
-#else
-static inline void bond_send_unsolicited_na(struct bonding *bond)
-{
- return;
-}
-static inline void bond_register_ipv6_notifier(void)
-{
- return;
-}
-static inline void bond_unregister_ipv6_notifier(void)
-{
- return;
-}
-#endif
-
#endif /* _LINUX_BONDING_H */
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index bd1d811..5fedc33 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -247,8 +247,10 @@
}
#endif /* CONFIG_PPC_MPC512x */
+static struct of_device_id mpc5xxx_can_table[];
static int __devinit mpc5xxx_can_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct mpc5xxx_can_data *data;
struct device_node *np = ofdev->dev.of_node;
struct net_device *dev;
@@ -258,9 +260,10 @@
int irq, mscan_clksrc = 0;
int err = -ENOMEM;
- if (!ofdev->dev.of_match)
+ match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
+ if (!match)
return -EINVAL;
- data = (struct mpc5xxx_can_data *)ofdev->dev.of_match->data;
+ data = match->data;
base = of_iomap(np, 0);
if (!base) {
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index a358ea9..f501bba 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -346,10 +346,10 @@
| (priv->read_reg(priv, REG_ID2) >> 5);
}
+ cf->can_dlc = get_can_dlc(fi & 0x0F);
if (fi & FI_RTR) {
id |= CAN_RTR_FLAG;
} else {
- cf->can_dlc = get_can_dlc(fi & 0x0F);
for (i = 0; i < cf->can_dlc; i++)
cf->data[i] = priv->read_reg(priv, dreg++);
}
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index b423965..1b49df6 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -583,7 +583,9 @@
/* Done. We have linked the TTY line to a channel. */
rtnl_unlock();
tty->receive_room = 65536; /* We don't flow control */
- return sl->dev->base_addr;
+
+ /* TTY layer expects 0 on success */
+ return 0;
err_free_chan:
sl->tty = NULL;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 143a28c..22ce03e 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -709,10 +709,11 @@
if (ep->autoneg == AUTONEG_ENABLE)
cp->link_cntl = BMCR_ANENABLE;
else {
+ u32 speed = ethtool_cmd_speed(ep);
cp->link_cntl = 0;
- if (ep->speed == SPEED_100)
+ if (speed == SPEED_100)
cp->link_cntl |= BMCR_SPEED100;
- else if (ep->speed == SPEED_1000)
+ else if (speed == SPEED_1000)
cp->link_cntl |= CAS_BMCR_SPEED1000;
if (ep->duplex == DUPLEX_FULL)
cp->link_cntl |= BMCR_FULLDPLX;
@@ -4605,18 +4606,17 @@
if (bmcr & BMCR_ANENABLE) {
cmd->advertising |= ADVERTISED_Autoneg;
cmd->autoneg = AUTONEG_ENABLE;
- cmd->speed = ((speed == 10) ?
- SPEED_10 :
- ((speed == 1000) ?
- SPEED_1000 : SPEED_100));
+ ethtool_cmd_speed_set(cmd, ((speed == 10) ?
+ SPEED_10 :
+ ((speed == 1000) ?
+ SPEED_1000 : SPEED_100)));
cmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
} else {
cmd->autoneg = AUTONEG_DISABLE;
- cmd->speed =
- (bmcr & CAS_BMCR_SPEED1000) ?
- SPEED_1000 :
- ((bmcr & BMCR_SPEED100) ? SPEED_100:
- SPEED_10);
+ ethtool_cmd_speed_set(cmd, ((bmcr & CAS_BMCR_SPEED1000) ?
+ SPEED_1000 :
+ ((bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10)));
cmd->duplex =
(bmcr & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
@@ -4633,14 +4633,14 @@
* settings that we configured.
*/
if (cp->link_cntl & BMCR_ANENABLE) {
- cmd->speed = 0;
+ ethtool_cmd_speed_set(cmd, 0);
cmd->duplex = 0xff;
} else {
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
if (cp->link_cntl & BMCR_SPEED100) {
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
} else if (cp->link_cntl & CAS_BMCR_SPEED1000) {
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
}
cmd->duplex = (cp->link_cntl & BMCR_FULLDPLX)?
DUPLEX_FULL : DUPLEX_HALF;
@@ -4653,6 +4653,7 @@
{
struct cas *cp = netdev_priv(dev);
unsigned long flags;
+ u32 speed = ethtool_cmd_speed(cmd);
/* Verify the settings we care about. */
if (cmd->autoneg != AUTONEG_ENABLE &&
@@ -4660,9 +4661,9 @@
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE &&
- ((cmd->speed != SPEED_1000 &&
- cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10) ||
+ ((speed != SPEED_1000 &&
+ speed != SPEED_100 &&
+ speed != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)))
return -EINVAL;
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 092f31a..c26d863 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -264,11 +264,6 @@
enum { /* adapter flags */
FULL_INIT_DONE = 1 << 0,
- TSO_CAPABLE = 1 << 2,
- TCP_CSUM_CAPABLE = 1 << 3,
- UDP_CSUM_CAPABLE = 1 << 4,
- VLAN_ACCEL_CAPABLE = 1 << 5,
- RX_CSUM_ENABLED = 1 << 6,
};
struct mdio_ops;
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index 0f71304..b422d83 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -192,10 +192,8 @@
static void enable_hw_csum(struct adapter *adapter)
{
- if (adapter->flags & TSO_CAPABLE)
+ if (adapter->port[0].dev->hw_features & NETIF_F_TSO)
t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */
- if (adapter->flags & UDP_CSUM_CAPABLE)
- t1_tp_set_udp_checksum_offload(adapter->tp, 1);
t1_tp_set_tcp_checksum_offload(adapter->tp, 1);
}
@@ -579,10 +577,10 @@
cmd->advertising = p->link_config.advertising;
if (netif_carrier_ok(dev)) {
- cmd->speed = p->link_config.speed;
+ ethtool_cmd_speed_set(cmd, p->link_config.speed);
cmd->duplex = p->link_config.duplex;
} else {
- cmd->speed = -1;
+ ethtool_cmd_speed_set(cmd, -1);
cmd->duplex = -1;
}
@@ -640,11 +638,12 @@
return -EOPNOTSUPP; /* can't change speed/duplex */
if (cmd->autoneg == AUTONEG_DISABLE) {
- int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+ u32 speed = ethtool_cmd_speed(cmd);
+ int cap = speed_duplex_to_caps(speed, cmd->duplex);
- if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+ if (!(lc->supported & cap) || (speed == SPEED_1000))
return -EINVAL;
- lc->requested_speed = cmd->speed;
+ lc->requested_speed = speed;
lc->requested_duplex = cmd->duplex;
lc->advertising = 0;
} else {
@@ -705,33 +704,6 @@
return 0;
}
-static u32 get_rx_csum(struct net_device *dev)
-{
- struct adapter *adapter = dev->ml_priv;
-
- return (adapter->flags & RX_CSUM_ENABLED) != 0;
-}
-
-static int set_rx_csum(struct net_device *dev, u32 data)
-{
- struct adapter *adapter = dev->ml_priv;
-
- if (data)
- adapter->flags |= RX_CSUM_ENABLED;
- else
- adapter->flags &= ~RX_CSUM_ENABLED;
- return 0;
-}
-
-static int set_tso(struct net_device *dev, u32 value)
-{
- struct adapter *adapter = dev->ml_priv;
-
- if (!(adapter->flags & TSO_CAPABLE))
- return value ? -EOPNOTSUPP : 0;
- return ethtool_op_set_tso(dev, value);
-}
-
static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
{
struct adapter *adapter = dev->ml_priv;
@@ -831,17 +803,12 @@
.get_eeprom = get_eeprom,
.get_pauseparam = get_pauseparam,
.set_pauseparam = set_pauseparam,
- .get_rx_csum = get_rx_csum,
- .set_rx_csum = set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
.get_link = ethtool_op_get_link,
.get_strings = get_strings,
.get_sset_count = get_sset_count,
.get_ethtool_stats = get_stats,
.get_regs_len = get_regs_len,
.get_regs = get_regs,
- .set_tso = set_tso,
};
static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
@@ -1105,28 +1072,28 @@
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len - 1;
netdev->ml_priv = adapter;
- netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- netdev->features |= NETIF_F_LLTX;
+ netdev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM;
+ netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_LLTX;
- adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
if (vlan_tso_capable(adapter)) {
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- adapter->flags |= VLAN_ACCEL_CAPABLE;
netdev->features |=
NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
#endif
/* T204: disable TSO */
if (!(is_T2(adapter)) || bi->port_number != 4) {
- adapter->flags |= TSO_CAPABLE;
+ netdev->hw_features |= NETIF_F_TSO;
netdev->features |= NETIF_F_TSO;
}
}
netdev->netdev_ops = &cxgb_netdev_ops;
- netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ?
+ netdev->hard_header_len += (netdev->hw_features & NETIF_F_TSO) ?
sizeof(struct cpl_tx_pkt_lso) : sizeof(struct cpl_tx_pkt);
netif_napi_add(netdev, &adapter->napi, t1_poll, 64);
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 8754d44..b948ea7 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -929,7 +929,7 @@
u32 en = SGE_INT_ENABLE;
u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
- if (sge->adapter->flags & TSO_CAPABLE)
+ if (sge->adapter->port[0].dev->hw_features & NETIF_F_TSO)
en &= ~F_PACKET_TOO_BIG;
writel(en, sge->adapter->regs + A_SG_INT_ENABLE);
writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
@@ -952,7 +952,7 @@
struct adapter *adapter = sge->adapter;
u32 cause = readl(adapter->regs + A_SG_INT_CAUSE);
- if (adapter->flags & TSO_CAPABLE)
+ if (adapter->port[0].dev->hw_features & NETIF_F_TSO)
cause &= ~F_PACKET_TOO_BIG;
if (cause & F_RESPQ_EXHAUSTED)
sge->stats.respQ_empty++;
@@ -1369,6 +1369,7 @@
const struct cpl_rx_pkt *p;
struct adapter *adapter = sge->adapter;
struct sge_port_stats *st;
+ struct net_device *dev;
skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad);
if (unlikely(!skb)) {
@@ -1384,9 +1385,10 @@
__skb_pull(skb, sizeof(*p));
st = this_cpu_ptr(sge->port_stats[p->iff]);
+ dev = adapter->port[p->iff].dev;
- skb->protocol = eth_type_trans(skb, adapter->port[p->iff].dev);
- if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
+ skb->protocol = eth_type_trans(skb, dev);
+ if ((dev->features & NETIF_F_RXCSUM) && p->csum == 0xffff &&
skb->protocol == htons(ETH_P_IP) &&
(skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) {
++st->rx_cso_good;
@@ -1838,8 +1840,7 @@
return NETDEV_TX_OK;
}
- if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
- skb->ip_summed == CHECKSUM_PARTIAL &&
+ if (skb->ip_summed == CHECKSUM_PARTIAL &&
ip_hdr(skb)->protocol == IPPROTO_UDP) {
if (unlikely(skb_checksum_help(skb))) {
pr_debug("%s: unable to do udp checksum\n", dev->name);
diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c
index 6222d58..8bed4a5 100644
--- a/drivers/net/chelsio/tp.c
+++ b/drivers/net/chelsio/tp.c
@@ -152,11 +152,6 @@
set_csum_offload(tp, F_IP_CSUM, enable);
}
-void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable)
-{
- set_csum_offload(tp, F_UDP_CSUM, enable);
-}
-
void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable)
{
set_csum_offload(tp, F_TCP_CSUM, enable);
diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h
index 32fc71e..dfd8ce2 100644
--- a/drivers/net/chelsio/tp.h
+++ b/drivers/net/chelsio/tp.h
@@ -65,7 +65,6 @@
int t1_tp_intr_handler(struct petp *tp);
void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps);
-void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable);
void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable);
void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable);
int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size);
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 8cca60e..cde59b4 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2966,31 +2966,36 @@
return 0;
}
+static void cnic_ulp_stop_one(struct cnic_local *cp, int if_type)
+{
+ struct cnic_ulp_ops *ulp_ops;
+
+ if (if_type == CNIC_ULP_ISCSI)
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
+ mutex_lock(&cnic_lock);
+ ulp_ops = rcu_dereference_protected(cp->ulp_ops[if_type],
+ lockdep_is_held(&cnic_lock));
+ if (!ulp_ops) {
+ mutex_unlock(&cnic_lock);
+ return;
+ }
+ set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_unlock(&cnic_lock);
+
+ if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+ ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+
+ clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+}
+
static void cnic_ulp_stop(struct cnic_dev *dev)
{
struct cnic_local *cp = dev->cnic_priv;
int if_type;
- cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
-
- for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
- struct cnic_ulp_ops *ulp_ops;
-
- mutex_lock(&cnic_lock);
- ulp_ops = rcu_dereference_protected(cp->ulp_ops[if_type],
- lockdep_is_held(&cnic_lock));
- if (!ulp_ops) {
- mutex_unlock(&cnic_lock);
- continue;
- }
- set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
- mutex_unlock(&cnic_lock);
-
- if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
- ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
-
- clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
- }
+ for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++)
+ cnic_ulp_stop_one(cp, if_type);
}
static void cnic_ulp_start(struct cnic_dev *dev)
@@ -3039,6 +3044,12 @@
cnic_put(dev);
break;
+ case CNIC_CTL_STOP_ISCSI_CMD: {
+ struct cnic_local *cp = dev->cnic_priv;
+ set_bit(CNIC_LCL_FL_STOP_ISCSI, &cp->cnic_local_flags);
+ queue_delayed_work(cnic_wq, &cp->delete_task, 0);
+ break;
+ }
case CNIC_CTL_COMPLETION_CMD: {
u32 cid = BNX2X_SW_CID(info->data.comp.cid);
u32 l5_cid;
@@ -3562,8 +3573,12 @@
static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
{
+ struct cnic_local *cp = csk->dev->cnic_priv;
int err = 0;
+ if (cp->ethdev->drv_state & CNIC_DRV_STATE_NO_ISCSI)
+ return -EOPNOTSUPP;
+
if (!cnic_in_use(csk))
return -EINVAL;
@@ -3965,6 +3980,15 @@
cp = container_of(work, struct cnic_local, delete_task.work);
dev = cp->dev;
+ if (test_and_clear_bit(CNIC_LCL_FL_STOP_ISCSI, &cp->cnic_local_flags)) {
+ struct drv_ctl_info info;
+
+ cnic_ulp_stop_one(cp, CNIC_ULP_ISCSI);
+
+ info.cmd = DRV_CTL_ISCSI_STOPPED_CMD;
+ cp->ethdev->drv_ctl(dev->netdev, &info);
+ }
+
for (i = 0; i < cp->max_cid_space; i++) {
struct cnic_context *ctx = &cp->ctx_tbl[i];
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 4456260..3367a6d3 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -226,6 +226,7 @@
#define CNIC_LCL_FL_KWQ_INIT 0x0
#define CNIC_LCL_FL_L2_WAIT 0x1
#define CNIC_LCL_FL_RINGS_INITED 0x2
+#define CNIC_LCL_FL_STOP_ISCSI 0x4
struct cnic_dev *dev;
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index e01b49e..fdd8e46 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
#ifndef CNIC_IF_H
#define CNIC_IF_H
-#define CNIC_MODULE_VERSION "2.2.13"
-#define CNIC_MODULE_RELDATE "Jan 31, 2011"
+#define CNIC_MODULE_VERSION "2.2.14"
+#define CNIC_MODULE_RELDATE "Mar 30, 2011"
#define CNIC_ULP_RDMA 0
#define CNIC_ULP_ISCSI 1
@@ -85,6 +85,7 @@
#define CNIC_CTL_STOP_CMD 1
#define CNIC_CTL_START_CMD 2
#define CNIC_CTL_COMPLETION_CMD 3
+#define CNIC_CTL_STOP_ISCSI_CMD 4
#define DRV_CTL_IO_WR_CMD 0x101
#define DRV_CTL_IO_RD_CMD 0x102
@@ -94,6 +95,7 @@
#define DRV_CTL_START_L2_CMD 0x106
#define DRV_CTL_STOP_L2_CMD 0x107
#define DRV_CTL_RET_L2_SPQ_CREDIT_CMD 0x10c
+#define DRV_CTL_ISCSI_STOPPED_CMD 0x10d
struct cnic_ctl_completion {
u32 cid;
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 9d267d3..e66aceb 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -491,8 +491,8 @@
/* allocate the irq corresponding to the receiving DMA */
- if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
- IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
+ if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt, 0, cardname,
+ (void *)dev)) {
goto grace_exit0;
}
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index ef67be5..7300de5 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -50,11 +50,6 @@
struct sge_qset;
struct port_info;
-enum { /* rx_offload flags */
- T3_RX_CSUM = 1 << 0,
- T3_LRO = 1 << 1,
-};
-
enum mac_idx_types {
LAN_MAC_IDX = 0,
SAN_MAC_IDX,
@@ -74,7 +69,6 @@
struct vlan_group *vlan_grp;
struct sge_qset *qs;
u8 port_id;
- u8 rx_offload;
u8 nqsets;
u8 first_qset;
struct cphy phy;
@@ -212,7 +206,6 @@
struct sge_fl fl[SGE_RXQ_PER_SET];
struct sge_txq txq[SGE_TXQ_PER_SET];
int nomem;
- int lro_enabled;
void *lro_va;
struct net_device *netdev;
struct netdev_queue *tx_q; /* associated netdev TX queue */
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 5ccb77d..056ee8c 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -317,7 +317,6 @@
struct qset_params { /* SGE queue set parameters */
unsigned int polling; /* polling/interrupt service for rspq */
- unsigned int lro; /* large receive offload */
unsigned int coalesce_usecs; /* irq coalescing timer */
unsigned int rspq_size; /* # of entries in response queue */
unsigned int fl_size; /* # of entries in regular free list */
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 9108931..9081ce0 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -644,26 +644,6 @@
}
/**
- * set_qset_lro - Turn a queue set's LRO capability on and off
- * @dev: the device the qset is attached to
- * @qset_idx: the queue set index
- * @val: the LRO switch
- *
- * Sets LRO on or off for a particular queue set.
- * the device's features flag is updated to reflect the LRO
- * capability when all queues belonging to the device are
- * in the same state.
- */
-static void set_qset_lro(struct net_device *dev, int qset_idx, int val)
-{
- struct port_info *pi = netdev_priv(dev);
- struct adapter *adapter = pi->adapter;
-
- adapter->params.sge.qset[qset_idx].lro = !!val;
- adapter->sge.qs[qset_idx].lro_enabled = !!val;
-}
-
-/**
* setup_sge_qsets - configure SGE Tx/Rx/response queues
* @adap: the adapter
*
@@ -685,7 +665,6 @@
pi->qs = &adap->sge.qs[pi->first_qset];
for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
- set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
err = t3_sge_alloc_qset(adap, qset_idx, 1,
(adap->flags & USING_MSIX) ? qset_idx + 1 :
irq_idx,
@@ -1749,23 +1728,26 @@
return 0;
}
-static int cxgb3_phys_id(struct net_device *dev, u32 data)
+static int set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
- int i;
- if (data == 0)
- data = 2;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
- for (i = 0; i < data * 2; i++) {
+ case ETHTOOL_ID_OFF:
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, 0);
+ break;
+
+ case ETHTOOL_ID_ON:
+ case ETHTOOL_ID_INACTIVE:
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
- (i & 1) ? F_GPIO0_OUT_VAL : 0);
- if (msleep_interruptible(500))
- break;
- }
- t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
F_GPIO0_OUT_VAL);
+ }
+
return 0;
}
@@ -1777,10 +1759,10 @@
cmd->advertising = p->link_config.advertising;
if (netif_carrier_ok(dev)) {
- cmd->speed = p->link_config.speed;
+ ethtool_cmd_speed_set(cmd, p->link_config.speed);
cmd->duplex = p->link_config.duplex;
} else {
- cmd->speed = -1;
+ ethtool_cmd_speed_set(cmd, -1);
cmd->duplex = -1;
}
@@ -1839,7 +1821,8 @@
* being requested.
*/
if (cmd->autoneg == AUTONEG_DISABLE) {
- int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+ u32 speed = ethtool_cmd_speed(cmd);
+ int cap = speed_duplex_to_caps(speed, cmd->duplex);
if (lc->supported & cap)
return 0;
}
@@ -1847,11 +1830,12 @@
}
if (cmd->autoneg == AUTONEG_DISABLE) {
- int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+ u32 speed = ethtool_cmd_speed(cmd);
+ int cap = speed_duplex_to_caps(speed, cmd->duplex);
- if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+ if (!(lc->supported & cap) || (speed == SPEED_1000))
return -EINVAL;
- lc->requested_speed = cmd->speed;
+ lc->requested_speed = speed;
lc->requested_duplex = cmd->duplex;
lc->advertising = 0;
} else {
@@ -1907,29 +1891,6 @@
return 0;
}
-static u32 get_rx_csum(struct net_device *dev)
-{
- struct port_info *p = netdev_priv(dev);
-
- return p->rx_offload & T3_RX_CSUM;
-}
-
-static int set_rx_csum(struct net_device *dev, u32 data)
-{
- struct port_info *p = netdev_priv(dev);
-
- if (data) {
- p->rx_offload |= T3_RX_CSUM;
- } else {
- int i;
-
- p->rx_offload &= ~(T3_RX_CSUM | T3_LRO);
- for (i = p->first_qset; i < p->first_qset + p->nqsets; i++)
- set_qset_lro(dev, i, 0);
- }
- return 0;
-}
-
static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
{
struct port_info *pi = netdev_priv(dev);
@@ -2101,20 +2062,15 @@
.set_eeprom = set_eeprom,
.get_pauseparam = get_pauseparam,
.set_pauseparam = set_pauseparam,
- .get_rx_csum = get_rx_csum,
- .set_rx_csum = set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
.get_link = ethtool_op_get_link,
.get_strings = get_strings,
- .phys_id = cxgb3_phys_id,
+ .set_phys_id = set_phys_id,
.nway_reset = restart_autoneg,
.get_sset_count = get_sset_count,
.get_ethtool_stats = get_stats,
.get_regs_len = get_regs_len,
.get_regs = get_regs,
.get_wol = get_wol,
- .set_tso = ethtool_op_set_tso,
};
static int in_range(int val, int lo, int hi)
@@ -2162,15 +2118,6 @@
MAX_RSPQ_ENTRIES))
return -EINVAL;
- if ((adapter->flags & FULL_INIT_DONE) && t.lro > 0)
- for_each_port(adapter, i) {
- pi = adap2pinfo(adapter, i);
- if (t.qset_idx >= pi->first_qset &&
- t.qset_idx < pi->first_qset + pi->nqsets &&
- !(pi->rx_offload & T3_RX_CSUM))
- return -EINVAL;
- }
-
if ((adapter->flags & FULL_INIT_DONE) &&
(t.rspq_size >= 0 || t.fl_size[0] >= 0 ||
t.fl_size[1] >= 0 || t.txq_size[0] >= 0 ||
@@ -2231,8 +2178,14 @@
}
}
}
- if (t.lro >= 0)
- set_qset_lro(dev, t.qset_idx, t.lro);
+
+ if (t.lro >= 0) {
+ if (t.lro)
+ dev->wanted_features |= NETIF_F_GRO;
+ else
+ dev->wanted_features &= ~NETIF_F_GRO;
+ netdev_update_features(dev);
+ }
break;
}
@@ -2266,7 +2219,7 @@
t.fl_size[0] = q->fl_size;
t.fl_size[1] = q->jumbo_size;
t.polling = q->polling;
- t.lro = q->lro;
+ t.lro = !!(dev->features & NETIF_F_GRO);
t.intr_lat = q->coalesce_usecs;
t.cong_thres = q->cong_thres;
t.qnum = q1;
@@ -3304,18 +3257,18 @@
adapter->port[i] = netdev;
pi = netdev_priv(netdev);
pi->adapter = adapter;
- pi->rx_offload = T3_RX_CSUM | T3_LRO;
pi->port_id = i;
netif_carrier_off(netdev);
netdev->irq = pdev->irq;
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len - 1;
- netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
- netdev->features |= NETIF_F_GRO;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_TSO | NETIF_F_RXCSUM;
+ netdev->features |= netdev->hw_features |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
netdev->netdev_ops = &cxgb_netdev_ops;
SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
}
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index bfa2d56..cba1401 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2019,7 +2019,7 @@
skb_pull(skb, sizeof(*p) + pad);
skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
pi = netdev_priv(skb->dev);
- if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid &&
+ if ((skb->dev->features & NETIF_F_RXCSUM) && p->csum_valid &&
p->csum == htons(0xffff) && !p->fragment) {
qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2120,7 +2120,7 @@
offset = 2 + sizeof(struct cpl_rx_pkt);
cpl = qs->lro_va = sd->pg_chunk.va + 2;
- if ((pi->rx_offload & T3_RX_CSUM) &&
+ if ((qs->netdev->features & NETIF_F_RXCSUM) &&
cpl->csum_valid && cpl->csum == htons(0xffff)) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
@@ -2285,7 +2285,8 @@
q->next_holdoff = q->holdoff_tmr;
while (likely(budget_left && is_new_response(r, q))) {
- int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
+ int packet_complete, eth, ethpad = 2;
+ int lro = !!(qs->netdev->features & NETIF_F_GRO);
struct sk_buff *skb = NULL;
u32 len, flags;
__be32 rss_hi, rss_lo;
diff --git a/drivers/net/cxgb4/cxgb4.h b/drivers/net/cxgb4/cxgb4.h
index 01d49ea..bc9982a 100644
--- a/drivers/net/cxgb4/cxgb4.h
+++ b/drivers/net/cxgb4/cxgb4.h
@@ -290,7 +290,6 @@
u8 port_id;
u8 tx_chan;
u8 lport; /* associated offload logical port */
- u8 rx_offload; /* CSO, etc */
u8 nqsets; /* # of qsets */
u8 first_qset; /* index of first qset */
u8 rss_mode;
@@ -298,11 +297,6 @@
u16 *rss;
};
-/* port_info.rx_offload flags */
-enum {
- RX_CSO = 1 << 0,
-};
-
struct dentry;
struct work_struct;
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c
index 5352c8a..7e3cfbe 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/cxgb4/cxgb4_main.c
@@ -1336,15 +1336,20 @@
return 0;
}
-static int identify_port(struct net_device *dev, u32 data)
+static int identify_port(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
+ unsigned int val;
struct adapter *adap = netdev2adap(dev);
- if (data == 0)
- data = 2; /* default to 2 seconds */
+ if (state == ETHTOOL_ID_ACTIVE)
+ val = 0xffff;
+ else if (state == ETHTOOL_ID_INACTIVE)
+ val = 0;
+ else
+ return -EINVAL;
- return t4_identify_port(adap, adap->fn, netdev2pinfo(dev)->viid,
- data * 5);
+ return t4_identify_port(adap, adap->fn, netdev2pinfo(dev)->viid, val);
}
static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps)
@@ -1431,7 +1436,8 @@
cmd->supported = from_fw_linkcaps(p->port_type, p->link_cfg.supported);
cmd->advertising = from_fw_linkcaps(p->port_type,
p->link_cfg.advertising);
- cmd->speed = netif_carrier_ok(dev) ? p->link_cfg.speed : 0;
+ ethtool_cmd_speed_set(cmd,
+ netif_carrier_ok(dev) ? p->link_cfg.speed : 0);
cmd->duplex = DUPLEX_FULL;
cmd->autoneg = p->link_cfg.autoneg;
cmd->maxtxpkt = 0;
@@ -1455,6 +1461,7 @@
unsigned int cap;
struct port_info *p = netdev_priv(dev);
struct link_config *lc = &p->link_cfg;
+ u32 speed = ethtool_cmd_speed(cmd);
if (cmd->duplex != DUPLEX_FULL) /* only full-duplex supported */
return -EINVAL;
@@ -1465,16 +1472,16 @@
* being requested.
*/
if (cmd->autoneg == AUTONEG_DISABLE &&
- (lc->supported & speed_to_caps(cmd->speed)))
- return 0;
+ (lc->supported & speed_to_caps(speed)))
+ return 0;
return -EINVAL;
}
if (cmd->autoneg == AUTONEG_DISABLE) {
- cap = speed_to_caps(cmd->speed);
+ cap = speed_to_caps(speed);
- if (!(lc->supported & cap) || cmd->speed == SPEED_1000 ||
- cmd->speed == SPEED_10000)
+ if (!(lc->supported & cap) || (speed == SPEED_1000) ||
+ (speed == SPEED_10000))
return -EINVAL;
lc->requested_speed = cap;
lc->advertising = 0;
@@ -1526,24 +1533,6 @@
return 0;
}
-static u32 get_rx_csum(struct net_device *dev)
-{
- struct port_info *p = netdev_priv(dev);
-
- return p->rx_offload & RX_CSO;
-}
-
-static int set_rx_csum(struct net_device *dev, u32 data)
-{
- struct port_info *p = netdev_priv(dev);
-
- if (data)
- p->rx_offload |= RX_CSO;
- else
- p->rx_offload &= ~RX_CSO;
- return 0;
-}
-
static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
{
const struct port_info *pi = netdev_priv(dev);
@@ -1865,36 +1854,20 @@
return err;
}
-#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
-
-static int set_tso(struct net_device *dev, u32 value)
+static int cxgb_set_features(struct net_device *dev, u32 features)
{
- if (value)
- dev->features |= TSO_FLAGS;
- else
- dev->features &= ~TSO_FLAGS;
- return 0;
-}
-
-static int set_flags(struct net_device *dev, u32 flags)
-{
+ const struct port_info *pi = netdev_priv(dev);
+ u32 changed = dev->features ^ features;
int err;
- unsigned long old_feat = dev->features;
- err = ethtool_op_set_flags(dev, flags, ETH_FLAG_RXHASH |
- ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
- if (err)
- return err;
+ if (!(changed & NETIF_F_HW_VLAN_RX))
+ return 0;
- if ((old_feat ^ dev->features) & NETIF_F_HW_VLAN_RX) {
- const struct port_info *pi = netdev_priv(dev);
-
- err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1,
- -1, -1, -1, !!(flags & ETH_FLAG_RXVLAN),
- true);
- if (err)
- dev->features = old_feat;
- }
+ err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1,
+ -1, -1, -1,
+ !!(features & NETIF_F_HW_VLAN_RX), true);
+ if (unlikely(err))
+ dev->features = features ^ NETIF_F_HW_VLAN_RX;
return err;
}
@@ -2005,13 +1978,9 @@
.set_eeprom = set_eeprom,
.get_pauseparam = get_pauseparam,
.set_pauseparam = set_pauseparam,
- .get_rx_csum = get_rx_csum,
- .set_rx_csum = set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
- .set_sg = ethtool_op_set_sg,
.get_link = ethtool_op_get_link,
.get_strings = get_strings,
- .phys_id = identify_port,
+ .set_phys_id = identify_port,
.nway_reset = restart_autoneg,
.get_sset_count = get_sset_count,
.get_ethtool_stats = get_stats,
@@ -2019,8 +1988,6 @@
.get_regs = get_regs,
.get_wol = get_wol,
.set_wol = set_wol,
- .set_tso = set_tso,
- .set_flags = set_flags,
.get_rxnfc = get_rxnfc,
.get_rxfh_indir = get_rss_table,
.set_rxfh_indir = set_rss_table,
@@ -2877,6 +2844,7 @@
.ndo_get_stats64 = cxgb_get_stats,
.ndo_set_rx_mode = cxgb_set_rxmode,
.ndo_set_mac_address = cxgb_set_mac_addr,
+ .ndo_set_features = cxgb_set_features,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = cxgb_ioctl,
.ndo_change_mtu = cxgb_change_mtu,
@@ -3559,6 +3527,7 @@
t4_fw_bye(adapter, adapter->fn);
}
+#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \
NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA)
@@ -3660,14 +3629,14 @@
pi = netdev_priv(netdev);
pi->adapter = adapter;
pi->xact_addr_filt = -1;
- pi->rx_offload = RX_CSO;
pi->port_id = i;
netdev->irq = pdev->irq;
- netdev->features |= NETIF_F_SG | TSO_FLAGS;
- netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- netdev->features |= NETIF_F_GRO | NETIF_F_RXHASH | highdma;
- netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_RXHASH |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->features |= netdev->hw_features | highdma;
netdev->vlan_features = netdev->features & VLAN_FEAT;
netdev->netdev_ops = &cxgb4_netdev_ops;
diff --git a/drivers/net/cxgb4/sge.c b/drivers/net/cxgb4/sge.c
index 311471b..75a4b0f 100644
--- a/drivers/net/cxgb4/sge.c
+++ b/drivers/net/cxgb4/sge.c
@@ -1556,7 +1556,6 @@
{
bool csum_ok;
struct sk_buff *skb;
- struct port_info *pi;
const struct cpl_rx_pkt *pkt;
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
@@ -1584,10 +1583,9 @@
if (skb->dev->features & NETIF_F_RXHASH)
skb->rxhash = (__force u32)pkt->rsshdr.hash_val;
- pi = netdev_priv(skb->dev);
rxq->stats.pkts++;
- if (csum_ok && (pi->rx_offload & RX_CSO) &&
+ if (csum_ok && (q->netdev->features & NETIF_F_RXCSUM) &&
(pkt->l2info & htonl(RXF_UDP | RXF_TCP))) {
if (!pkt->ip_frag) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/cxgb4vf/adapter.h
index 4766b41..4fd821a 100644
--- a/drivers/net/cxgb4vf/adapter.h
+++ b/drivers/net/cxgb4vf/adapter.h
@@ -97,17 +97,11 @@
u16 rss_size; /* size of VI's RSS table slice */
u8 pidx; /* index into adapter port[] */
u8 port_id; /* physical port ID */
- u8 rx_offload; /* CSO, etc. */
u8 nqsets; /* # of "Queue Sets" */
u8 first_qset; /* index of first "Queue Set" */
struct link_config link_cfg; /* physical port configuration */
};
-/* port_info.rx_offload flags */
-enum {
- RX_CSO = 1 << 0,
-};
-
/*
* Scatter Gather Engine resources for the "adapter". Our ingress and egress
* queues are organized into "Queue Sets" with one ingress and one egress
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 4661cbb..e71c08e 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -1167,7 +1167,8 @@
cmd->supported = pi->link_cfg.supported;
cmd->advertising = pi->link_cfg.advertising;
- cmd->speed = netif_carrier_ok(dev) ? pi->link_cfg.speed : -1;
+ ethtool_cmd_speed_set(cmd,
+ netif_carrier_ok(dev) ? pi->link_cfg.speed : -1);
cmd->duplex = DUPLEX_FULL;
cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
@@ -1326,37 +1327,22 @@
}
/*
- * Return whether RX Checksum Offloading is currently enabled for the device.
- */
-static u32 cxgb4vf_get_rx_csum(struct net_device *dev)
-{
- struct port_info *pi = netdev_priv(dev);
-
- return (pi->rx_offload & RX_CSO) != 0;
-}
-
-/*
- * Turn RX Checksum Offloading on or off for the device.
- */
-static int cxgb4vf_set_rx_csum(struct net_device *dev, u32 csum)
-{
- struct port_info *pi = netdev_priv(dev);
-
- if (csum)
- pi->rx_offload |= RX_CSO;
- else
- pi->rx_offload &= ~RX_CSO;
- return 0;
-}
-
-/*
* Identify the port by blinking the port's LED.
*/
-static int cxgb4vf_phys_id(struct net_device *dev, u32 id)
+static int cxgb4vf_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
+ unsigned int val;
struct port_info *pi = netdev_priv(dev);
- return t4vf_identify_port(pi->adapter, pi->viid, 5);
+ if (state == ETHTOOL_ID_ACTIVE)
+ val = 0xffff;
+ else if (state == ETHTOOL_ID_INACTIVE)
+ val = 0;
+ else
+ return -EINVAL;
+
+ return t4vf_identify_port(pi->adapter, pi->viid, val);
}
/*
@@ -1560,18 +1546,6 @@
*/
#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
-/*
- * Set TCP Segmentation Offloading feature capabilities.
- */
-static int cxgb4vf_set_tso(struct net_device *dev, u32 tso)
-{
- if (tso)
- dev->features |= TSO_FLAGS;
- else
- dev->features &= ~TSO_FLAGS;
- return 0;
-}
-
static struct ethtool_ops cxgb4vf_ethtool_ops = {
.get_settings = cxgb4vf_get_settings,
.get_drvinfo = cxgb4vf_get_drvinfo,
@@ -1582,19 +1556,14 @@
.get_coalesce = cxgb4vf_get_coalesce,
.set_coalesce = cxgb4vf_set_coalesce,
.get_pauseparam = cxgb4vf_get_pauseparam,
- .get_rx_csum = cxgb4vf_get_rx_csum,
- .set_rx_csum = cxgb4vf_set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
- .set_sg = ethtool_op_set_sg,
.get_link = ethtool_op_get_link,
.get_strings = cxgb4vf_get_strings,
- .phys_id = cxgb4vf_phys_id,
+ .set_phys_id = cxgb4vf_phys_id,
.get_sset_count = cxgb4vf_get_sset_count,
.get_ethtool_stats = cxgb4vf_get_ethtool_stats,
.get_regs_len = cxgb4vf_get_regs_len,
.get_regs = cxgb4vf_get_regs,
.get_wol = cxgb4vf_get_wol,
- .set_tso = cxgb4vf_set_tso,
};
/*
@@ -2629,19 +2598,19 @@
* it.
*/
pi->xact_addr_filt = -1;
- pi->rx_offload = RX_CSO;
netif_carrier_off(netdev);
netdev->irq = pdev->irq;
- netdev->features = (NETIF_F_SG | TSO_FLAGS |
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
- NETIF_F_GRO);
+ netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+ netdev->vlan_features = NETIF_F_SG | TSO_FLAGS |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_HIGHDMA;
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_RX;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features =
- (netdev->features &
- ~(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX));
#ifdef HAVE_NET_DEVICE_OPS
netdev->netdev_ops = &cxgb4vf_netdev_ops;
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
index bb65121..5182960 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/cxgb4vf/sge.c
@@ -1555,8 +1555,8 @@
pi = netdev_priv(skb->dev);
rxq->stats.pkts++;
- if (csum_ok && (pi->rx_offload & RX_CSO) && !pkt->err_vec &&
- (be32_to_cpu(pkt->l2info) & (RXF_UDP|RXF_TCP))) {
+ if (csum_ok && (rspq->netdev->features & NETIF_F_RXCSUM) &&
+ !pkt->err_vec && (be32_to_cpu(pkt->l2info) & (RXF_UDP|RXF_TCP))) {
if (!pkt->ip_frag)
skb->ip_summed = CHECKSUM_UNNECESSARY;
else {
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 8b0084d..1765405 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -331,18 +331,18 @@
"DE422",\
""}
-static char* __initdata depca_signature[] = DEPCA_SIGNATURE;
+static const char* const depca_signature[] __devinitconst = DEPCA_SIGNATURE;
enum depca_type {
DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown
};
-static char depca_string[] = "depca";
+static const char depca_string[] = "depca";
static int depca_device_remove (struct device *device);
#ifdef CONFIG_EISA
-static struct eisa_device_id depca_eisa_ids[] = {
+static const struct eisa_device_id depca_eisa_ids[] __devinitconst = {
{ "DEC4220", de422 },
{ "" }
};
@@ -367,19 +367,19 @@
#define DE210_ID 0x628d
#define DE212_ID 0x6def
-static short depca_mca_adapter_ids[] = {
+static const short depca_mca_adapter_ids[] __devinitconst = {
DE210_ID,
DE212_ID,
0x0000
};
-static char *depca_mca_adapter_name[] = {
+static const char *depca_mca_adapter_name[] = {
"DEC EtherWORKS MC Adapter (DE210)",
"DEC EtherWORKS MC Adapter (DE212)",
NULL
};
-static enum depca_type depca_mca_adapter_type[] = {
+static const enum depca_type depca_mca_adapter_type[] = {
de210,
de212,
0
@@ -541,10 +541,9 @@
static int load_packet(struct net_device *dev, struct sk_buff *skb);
static void depca_dbg_open(struct net_device *dev);
-static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 };
-static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 };
-static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 };
-static u_char *depca_irq;
+static const u_char de1xx_irq[] __devinitconst = { 2, 3, 4, 5, 7, 9, 0 };
+static const u_char de2xx_irq[] __devinitconst = { 5, 9, 10, 11, 15, 0 };
+static const u_char de422_irq[] __devinitconst = { 5, 9, 10, 11, 0 };
static int irq;
static int io;
@@ -580,7 +579,7 @@
.ndo_validate_addr = eth_validate_addr,
};
-static int __init depca_hw_init (struct net_device *dev, struct device *device)
+static int __devinit depca_hw_init (struct net_device *dev, struct device *device)
{
struct depca_private *lp;
int i, j, offset, netRAM, mem_len, status = 0;
@@ -748,6 +747,7 @@
if (dev->irq < 2) {
unsigned char irqnum;
unsigned long irq_mask, delay;
+ const u_char *depca_irq;
irq_mask = probe_irq_on();
@@ -770,6 +770,7 @@
break;
default:
+ depca_irq = NULL;
break; /* Not reached */
}
@@ -1302,7 +1303,7 @@
}
}
-static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
+static int __devinit depca_common_init (u_long ioaddr, struct net_device **devp)
{
int status = 0;
@@ -1333,7 +1334,7 @@
/*
** Microchannel bus I/O device probe
*/
-static int __init depca_mca_probe(struct device *device)
+static int __devinit depca_mca_probe(struct device *device)
{
unsigned char pos[2];
unsigned char where;
@@ -1457,7 +1458,7 @@
** ISA bus I/O device probe
*/
-static void __init depca_platform_probe (void)
+static void __devinit depca_platform_probe (void)
{
int i;
struct platform_device *pldev;
@@ -1497,7 +1498,7 @@
}
}
-static enum depca_type __init depca_shmem_probe (ulong *mem_start)
+static enum depca_type __devinit depca_shmem_probe (ulong *mem_start)
{
u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES;
enum depca_type adapter = unknown;
@@ -1558,7 +1559,7 @@
*/
#ifdef CONFIG_EISA
-static int __init depca_eisa_probe (struct device *device)
+static int __devinit depca_eisa_probe (struct device *device)
{
enum depca_type adapter = unknown;
struct eisa_device *edev;
@@ -1629,7 +1630,7 @@
** and Boot (readb) ROM. This will also give us a clue to the network RAM
** base address.
*/
-static int __init DepcaSignature(char *name, u_long base_addr)
+static int __devinit DepcaSignature(char *name, u_long base_addr)
{
u_int i, j, k;
void __iomem *ptr;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index c05db60..c445457 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -1189,10 +1189,10 @@
cmd->transceiver = XCVR_INTERNAL;
}
if ( np->link_status ) {
- cmd->speed = np->speed;
+ ethtool_cmd_speed_set(cmd, np->speed);
cmd->duplex = np->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
} else {
- cmd->speed = -1;
+ ethtool_cmd_speed_set(cmd, -1);
cmd->duplex = -1;
}
if ( np->an_enable)
@@ -1219,31 +1219,20 @@
} else {
np->an_enable = 0;
if (np->speed == 1000) {
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
cmd->duplex = DUPLEX_FULL;
printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n");
}
- switch(cmd->speed + cmd->duplex) {
-
- case SPEED_10 + DUPLEX_HALF:
+ switch (ethtool_cmd_speed(cmd)) {
+ case SPEED_10:
np->speed = 10;
- np->full_duplex = 0;
+ np->full_duplex = (cmd->duplex == DUPLEX_FULL);
break;
-
- case SPEED_10 + DUPLEX_FULL:
- np->speed = 10;
- np->full_duplex = 1;
- break;
- case SPEED_100 + DUPLEX_HALF:
+ case SPEED_100:
np->speed = 100;
- np->full_duplex = 0;
+ np->full_duplex = (cmd->duplex == DUPLEX_FULL);
break;
- case SPEED_100 + DUPLEX_FULL:
- np->speed = 100;
- np->full_duplex = 1;
- break;
- case SPEED_1000 + DUPLEX_HALF:/* not supported */
- case SPEED_1000 + DUPLEX_FULL:/* not supported */
+ case SPEED_1000: /* not supported */
default:
return -EINVAL;
}
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b7af5ba..fbaff35 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -131,8 +131,6 @@
u32 msg_enable;
u32 wake_state;
- int rx_csum;
- int can_csum;
int ip_summed;
} board_info_t;
@@ -470,47 +468,20 @@
return mii_nway_restart(&dm->mii);
}
-static uint32_t dm9000_get_rx_csum(struct net_device *dev)
+static int dm9000_set_features(struct net_device *dev, u32 features)
{
board_info_t *dm = to_dm9000_board(dev);
- return dm->rx_csum;
-}
-
-static int dm9000_set_rx_csum_unlocked(struct net_device *dev, uint32_t data)
-{
- board_info_t *dm = to_dm9000_board(dev);
-
- if (dm->can_csum) {
- dm->rx_csum = data;
- iow(dm, DM9000_RCSR, dm->rx_csum ? RCSR_CSUM : 0);
-
- return 0;
- }
-
- return -EOPNOTSUPP;
-}
-
-static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data)
-{
- board_info_t *dm = to_dm9000_board(dev);
+ u32 changed = dev->features ^ features;
unsigned long flags;
- int ret;
+
+ if (!(changed & NETIF_F_RXCSUM))
+ return 0;
spin_lock_irqsave(&dm->lock, flags);
- ret = dm9000_set_rx_csum_unlocked(dev, data);
+ iow(dm, DM9000_RCSR, (features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0);
spin_unlock_irqrestore(&dm->lock, flags);
- return ret;
-}
-
-static int dm9000_set_tx_csum(struct net_device *dev, uint32_t data)
-{
- board_info_t *dm = to_dm9000_board(dev);
- int ret = -EOPNOTSUPP;
-
- if (dm->can_csum)
- ret = ethtool_op_set_tx_csum(dev, data);
- return ret;
+ return 0;
}
static u32 dm9000_get_link(struct net_device *dev)
@@ -643,10 +614,6 @@
.get_eeprom_len = dm9000_get_eeprom_len,
.get_eeprom = dm9000_get_eeprom,
.set_eeprom = dm9000_set_eeprom,
- .get_rx_csum = dm9000_get_rx_csum,
- .set_rx_csum = dm9000_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = dm9000_set_tx_csum,
};
static void dm9000_show_carrier(board_info_t *db,
@@ -800,7 +767,9 @@
db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
/* Checksum mode */
- dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
+ if (dev->hw_features & NETIF_F_RXCSUM)
+ iow(db, DM9000_RCSR,
+ (dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0);
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
@@ -1049,7 +1018,7 @@
/* Pass to upper layer */
skb->protocol = eth_type_trans(skb, dev);
- if (db->rx_csum) {
+ if (dev->features & NETIF_F_RXCSUM) {
if ((((rxbyte & 0x1c) << 3) & rxbyte) == 0)
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
@@ -1358,6 +1327,7 @@
.ndo_set_multicast_list = dm9000_hash_table,
.ndo_do_ioctl = dm9000_ioctl,
.ndo_change_mtu = eth_change_mtu,
+ .ndo_set_features = dm9000_set_features,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1551,9 +1521,8 @@
/* dm9000a/b are capable of hardware checksum offload */
if (db->type == TYPE_DM9000A || db->type == TYPE_DM9000B) {
- db->can_csum = 1;
- db->rx_csum = 1;
- ndev->features |= NETIF_F_IP_CSUM;
+ ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+ ndev->features |= ndev->hw_features;
}
/* from this point we assume that we have found a DM9000 */
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index ff2d29b..39cf9b9 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -168,10 +168,6 @@
if (!dev_dummy)
return -ENOMEM;
- err = dev_alloc_name(dev_dummy, dev_dummy->name);
- if (err < 0)
- goto err;
-
dev_dummy->rtnl_link_ops = &dummy_link_ops;
err = register_netdevice(dev_dummy);
if (err < 0)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index b0aa9e6..e336c79 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -593,7 +593,6 @@
enum phy phy;
struct params params;
struct timer_list watchdog;
- struct timer_list blink_timer;
struct mii_if_info mii;
struct work_struct tx_timeout_task;
enum loopback loopback;
@@ -618,7 +617,6 @@
u32 rx_tco_frames;
u32 rx_over_length_errors;
- u16 leds;
u16 eeprom_wc;
__le16 eeprom[256];
spinlock_t mdio_lock;
@@ -1512,7 +1510,7 @@
static int e100_hw_init(struct nic *nic)
{
- int err;
+ int err = 0;
e100_hw_reset(nic);
@@ -1668,7 +1666,8 @@
static void e100_watchdog(unsigned long data)
{
struct nic *nic = (struct nic *)data;
- struct ethtool_cmd cmd;
+ struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
+ u32 speed;
netif_printk(nic, timer, KERN_DEBUG, nic->netdev,
"right now = %ld\n", jiffies);
@@ -1676,10 +1675,11 @@
/* mii library handles link maintenance tasks */
mii_ethtool_gset(&nic->mii, &cmd);
+ speed = ethtool_cmd_speed(&cmd);
if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n",
- cmd.speed == SPEED_100 ? 100 : 10,
+ speed == SPEED_100 ? 100 : 10,
cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
} else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
netdev_info(nic->netdev, "NIC Link is Down\n");
@@ -1698,13 +1698,13 @@
spin_unlock_irq(&nic->cmd_lock);
e100_update_stats(nic);
- e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
+ e100_adjust_adaptive_ifs(nic, speed, cmd.duplex);
if (nic->mac <= mac_82557_D100_C)
/* Issue a multicast command to workaround a 557 lock up */
e100_set_multicast_list(nic->netdev);
- if (nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+ if (nic->flags & ich && speed == SPEED_10 && cmd.duplex == DUPLEX_HALF)
/* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
nic->flags |= ich_10h_workaround;
else
@@ -2351,30 +2351,6 @@
#define E100_82552_LED_OVERRIDE 0x19
#define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */
#define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */
-static void e100_blink_led(unsigned long data)
-{
- struct nic *nic = (struct nic *)data;
- enum led_state {
- led_on = 0x01,
- led_off = 0x04,
- led_on_559 = 0x05,
- led_on_557 = 0x07,
- };
- u16 led_reg = MII_LED_CONTROL;
-
- if (nic->phy == phy_82552_v) {
- led_reg = E100_82552_LED_OVERRIDE;
-
- nic->leds = (nic->leds == E100_82552_LED_ON) ?
- E100_82552_LED_OFF : E100_82552_LED_ON;
- } else {
- nic->leds = (nic->leds & led_on) ? led_off :
- (nic->mac < mac_82559_D101M) ? led_on_557 :
- led_on_559;
- }
- mdio_write(nic->netdev, nic->mii.phy_id, led_reg, nic->leds);
- mod_timer(&nic->blink_timer, jiffies + HZ / 4);
-}
static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
{
@@ -2598,19 +2574,38 @@
msleep_interruptible(4 * 1000);
}
-static int e100_phys_id(struct net_device *netdev, u32 data)
+static int e100_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct nic *nic = netdev_priv(netdev);
+ enum led_state {
+ led_on = 0x01,
+ led_off = 0x04,
+ led_on_559 = 0x05,
+ led_on_557 = 0x07,
+ };
u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
- MII_LED_CONTROL;
+ MII_LED_CONTROL;
+ u16 leds = 0;
- if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
- mod_timer(&nic->blink_timer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&nic->blink_timer);
- mdio_write(netdev, nic->mii.phy_id, led_reg, 0);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 2;
+ case ETHTOOL_ID_ON:
+ leds = (nic->phy == phy_82552_v) ? E100_82552_LED_ON :
+ (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
+ break;
+
+ case ETHTOOL_ID_OFF:
+ leds = (nic->phy == phy_82552_v) ? E100_82552_LED_OFF : led_off;
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ break;
+ }
+
+ mdio_write(netdev, nic->mii.phy_id, led_reg, leds);
return 0;
}
@@ -2691,7 +2686,7 @@
.set_ringparam = e100_set_ringparam,
.self_test = e100_diag_test,
.get_strings = e100_get_strings,
- .phys_id = e100_phys_id,
+ .set_phys_id = e100_set_phys_id,
.get_ethtool_stats = e100_get_ethtool_stats,
.get_sset_count = e100_get_sset_count,
};
@@ -2832,9 +2827,6 @@
init_timer(&nic->watchdog);
nic->watchdog.function = e100_watchdog;
nic->watchdog.data = (unsigned long)nic;
- init_timer(&nic->blink_timer);
- nic->blink_timer.function = e100_blink_led;
- nic->blink_timer.data = (unsigned long)nic;
INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index a881dd0..8676899 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -238,9 +238,6 @@
struct work_struct reset_task;
u8 fc_autoneg;
- struct timer_list blink_timer;
- unsigned long led_status;
-
/* TX */
struct e1000_tx_ring *tx_ring; /* One per active queue */
unsigned int restart_queue;
@@ -349,7 +346,7 @@
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reinit_locked(struct e1000_adapter *adapter);
extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index dd70738..ec0fa42 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -158,7 +158,7 @@
e1000_get_speed_and_duplex(hw, &adapter->link_speed,
&adapter->link_duplex);
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
/* unfortunately FULL_DUPLEX != DUPLEX_FULL
* and HALF_DUPLEX != DUPLEX_HALF */
@@ -168,7 +168,7 @@
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -197,11 +197,13 @@
ADVERTISED_TP |
ADVERTISED_Autoneg;
ecmd->advertising = hw->autoneg_advertised;
- } else
- if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ } else {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->flags);
return -EINVAL;
}
+ }
/* reset the link */
@@ -1753,46 +1755,28 @@
return 0;
}
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define E1000_ID_INTERVAL (HZ/4)
-
-/* bit defines for adapter->led_status */
-#define E1000_LED_ON 0
-
-static void e1000_led_blink_callback(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
- struct e1000_hw *hw = &adapter->hw;
-
- if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
- e1000_led_off(hw);
- else
- e1000_led_on(hw);
-
- mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-}
-
-static int e1000_phys_id(struct net_device *netdev, u32 data)
+static int e1000_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if (!data)
- data = INT_MAX;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ e1000_setup_led(hw);
+ return 2;
- if (!adapter->blink_timer.function) {
- init_timer(&adapter->blink_timer);
- adapter->blink_timer.function = e1000_led_blink_callback;
- adapter->blink_timer.data = (unsigned long)adapter;
+ case ETHTOOL_ID_ON:
+ e1000_led_on(hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ e1000_led_off(hw);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ e1000_cleanup_led(hw);
}
- e1000_setup_led(hw);
- mod_timer(&adapter->blink_timer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&adapter->blink_timer);
-
- e1000_led_off(hw);
- clear_bit(E1000_LED_ON, &adapter->led_status);
- e1000_cleanup_led(hw);
return 0;
}
@@ -1929,7 +1913,7 @@
.set_tso = e1000_set_tso,
.self_test = e1000_diag_test,
.get_strings = e1000_get_strings,
- .phys_id = e1000_phys_id,
+ .set_phys_id = e1000_set_phys_id,
.get_ethtool_stats = e1000_get_ethtool_stats,
.get_sset_count = e1000_get_sset_count,
.get_coalesce = e1000_get_coalesce,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 477e066..c18cb8e 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -96,7 +96,6 @@
void e1000_down(struct e1000_adapter *adapter);
void e1000_reinit_locked(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
@@ -4385,7 +4384,6 @@
struct mii_ioctl_data *data = if_mii(ifr);
int retval;
u16 mii_reg;
- u16 spddplx;
unsigned long flags;
if (hw->media_type != e1000_media_type_copper)
@@ -4424,17 +4422,18 @@
hw->autoneg = 1;
hw->autoneg_advertised = 0x2F;
} else {
+ u32 speed;
if (mii_reg & 0x40)
- spddplx = SPEED_1000;
+ speed = SPEED_1000;
else if (mii_reg & 0x2000)
- spddplx = SPEED_100;
+ speed = SPEED_100;
else
- spddplx = SPEED_10;
- spddplx += (mii_reg & 0x100)
- ? DUPLEX_FULL :
- DUPLEX_HALF;
- retval = e1000_set_spd_dplx(adapter,
- spddplx);
+ speed = SPEED_10;
+ retval = e1000_set_spd_dplx(
+ adapter, speed,
+ ((mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF));
if (retval)
return retval;
}
@@ -4596,20 +4595,24 @@
}
}
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
{
struct e1000_hw *hw = &adapter->hw;
hw->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((hw->media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- e_err(probe, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
- }
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL)
+ goto err_inval;
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
hw->forced_speed_duplex = e1000_10_half;
break;
@@ -4628,10 +4631,13 @@
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- e_err(probe, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ e_err(probe, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 89a6903..8295f21 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -300,6 +300,7 @@
func->set_lan_id = e1000_set_lan_id_single_port;
func->check_mng_mode = e1000e_check_mng_mode_generic;
func->led_on = e1000e_led_on_generic;
+ func->blink_led = e1000e_blink_led_generic;
/* FWSM register */
mac->has_fwsm = true;
@@ -320,6 +321,7 @@
default:
func->check_mng_mode = e1000e_check_mng_mode_generic;
func->led_on = e1000e_led_on_generic;
+ func->blink_led = e1000e_blink_led_generic;
/* FWSM register */
mac->has_fwsm = true;
@@ -431,9 +433,6 @@
case e1000_82573:
case e1000_82574:
case e1000_82583:
- /* Disable ASPM L0s due to hardware errata */
- e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S);
-
if (pdev->device == E1000_DEV_ID_82573L) {
adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
adapter->max_hw_frame_size = DEFAULT_JUMBO;
@@ -594,7 +593,7 @@
extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
- msleep(2);
+ usleep_range(2000, 4000);
i++;
} while (i < MDIO_OWNERSHIP_TIMEOUT);
@@ -816,7 +815,7 @@
/* Check for pending operations. */
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
- msleep(1);
+ usleep_range(1000, 2000);
if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
break;
}
@@ -840,7 +839,7 @@
ew32(EECD, eecd);
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
- msleep(1);
+ usleep_range(1000, 2000);
if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
break;
}
@@ -930,7 +929,7 @@
if (er32(EEMNGCTL) &
E1000_NVM_CFG_DONE_PORT_0)
break;
- msleep(1);
+ usleep_range(1000, 2000);
timeout--;
}
if (!timeout) {
@@ -1037,7 +1036,7 @@
ew32(TCTL, E1000_TCTL_PSP);
e1e_flush();
- msleep(10);
+ usleep_range(10000, 20000);
/*
* Must acquire the MDIO ownership before MAC reset.
@@ -2066,7 +2065,8 @@
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_SWSM_ON_LOAD,
- .flags2 = FLAG2_DISABLE_ASPM_L1,
+ .flags2 = FLAG2_DISABLE_ASPM_L1
+ | FLAG2_DISABLE_ASPM_L0S,
.pba = 20,
.max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
.get_variants = e1000_get_variants_82571,
@@ -2086,7 +2086,8 @@
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_CHECK_PHY_HANG,
+ .flags2 = FLAG2_CHECK_PHY_HANG
+ | FLAG2_DISABLE_ASPM_L0S,
.pba = 32,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
@@ -2104,6 +2105,7 @@
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L0S,
.pba = 32,
.max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
.get_variants = e1000_get_variants_82571,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 00bf595..9549879 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -31,6 +31,7 @@
#ifndef _E1000_H_
#define _E1000_H_
+#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
@@ -39,6 +40,7 @@
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/crc32.h>
+#include <linux/if_vlan.h>
#include "hw.h"
@@ -280,7 +282,7 @@
const struct e1000_info *ei;
- struct vlan_group *vlgrp;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
u32 bd_number;
u32 rx_buffer_len;
u16 mng_vlan_id;
@@ -389,13 +391,10 @@
bool fc_autoneg;
- unsigned long led_status;
-
unsigned int flags;
unsigned int flags2;
struct work_struct downshift_task;
struct work_struct update_phy_task;
- struct work_struct led_blink_task;
struct work_struct print_hang_task;
bool idle_check;
@@ -456,6 +455,7 @@
#define FLAG2_HAS_PHY_STATS (1 << 4)
#define FLAG2_HAS_EEE (1 << 5)
#define FLAG2_DMA_BURST (1 << 6)
+#define FLAG2_DISABLE_ASPM_L0S (1 << 7)
#define FLAG2_DISABLE_AIM (1 << 8)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
@@ -484,7 +484,6 @@
extern void e1000e_check_options(struct e1000_adapter *adapter);
extern void e1000e_set_ethtool_ops(struct net_device *netdev);
-extern void e1000e_led_blink_task(struct work_struct *work);
extern int e1000e_up(struct e1000_adapter *adapter);
extern void e1000e_down(struct e1000_adapter *adapter);
@@ -502,7 +501,6 @@
extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
-extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
extern unsigned int copybreak;
@@ -573,7 +571,7 @@
extern void e1000e_config_collision_dist(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
-extern s32 e1000e_blink_led(struct e1000_hw *hw);
+extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
extern void e1000e_reset_adaptive(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 2fefa82..f4bbeb2 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -612,7 +612,7 @@
while (timeout) {
if (er32(EEMNGCTL) & mask)
break;
- msleep(1);
+ usleep_range(1000, 2000);
timeout--;
}
if (!timeout) {
@@ -802,7 +802,7 @@
ew32(TCTL, E1000_TCTL_PSP);
e1e_flush();
- msleep(10);
+ usleep_range(10000, 20000);
ctrl = er32(CTRL);
@@ -1434,6 +1434,7 @@
static struct e1000_mac_operations es2_mac_ops = {
.read_mac_addr = e1000_read_mac_addr_80003es2lan,
.id_led_init = e1000e_id_led_init,
+ .blink_led = e1000e_blink_led_generic,
.check_mng_mode = e1000e_check_mng_mode_generic,
/* check_for_link dependent on media type */
.cleanup_led = e1000e_cleanup_led_generic,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 07f09e9..859d0d3 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -122,6 +122,7 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u32 speed;
if (hw->phy.media_type == e1000_media_type_copper) {
@@ -159,23 +160,23 @@
ecmd->transceiver = XCVR_EXTERNAL;
}
- ecmd->speed = -1;
+ speed = -1;
ecmd->duplex = -1;
if (netif_running(netdev)) {
if (netif_carrier_ok(netdev)) {
- ecmd->speed = adapter->link_speed;
+ speed = adapter->link_speed;
ecmd->duplex = adapter->link_duplex - 1;
}
} else {
u32 status = er32(STATUS);
if (status & E1000_STATUS_LU) {
if (status & E1000_STATUS_SPEED_1000)
- ecmd->speed = 1000;
+ speed = SPEED_1000;
else if (status & E1000_STATUS_SPEED_100)
- ecmd->speed = 100;
+ speed = SPEED_100;
else
- ecmd->speed = 10;
+ speed = SPEED_10;
if (status & E1000_STATUS_FD)
ecmd->duplex = DUPLEX_FULL;
@@ -184,6 +185,7 @@
}
}
+ ethtool_cmd_speed_set(ecmd, speed);
ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
@@ -198,20 +200,25 @@
return 0;
}
-static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
{
struct e1000_mac_info *mac = &adapter->hw.mac;
mac->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL) {
+ goto err_inval;
}
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
break;
@@ -230,10 +237,13 @@
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ e_err("Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int e1000_set_settings(struct net_device *netdev,
@@ -253,7 +263,7 @@
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
@@ -269,7 +279,8 @@
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
} else {
- if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
return -EINVAL;
}
@@ -317,7 +328,7 @@
adapter->fc_autoneg = pause->autoneg;
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
hw->fc.requested_mode = e1000_fc_default;
@@ -673,7 +684,7 @@
return -EINVAL;
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (netif_running(adapter->netdev))
e1000e_down(adapter);
@@ -952,7 +963,7 @@
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
- msleep(10);
+ usleep_range(10000, 20000);
/* Test each interrupt */
for (i = 0; i < 10; i++) {
@@ -984,7 +995,7 @@
adapter->test_icr = 0;
ew32(IMC, mask);
ew32(ICS, mask);
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->test_icr & mask) {
*data = 3;
@@ -1002,7 +1013,7 @@
adapter->test_icr = 0;
ew32(IMS, mask);
ew32(ICS, mask);
- msleep(10);
+ usleep_range(10000, 20000);
if (!(adapter->test_icr & mask)) {
*data = 4;
@@ -1020,7 +1031,7 @@
adapter->test_icr = 0;
ew32(IMC, ~mask & 0x00007FFF);
ew32(ICS, ~mask & 0x00007FFF);
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->test_icr) {
*data = 5;
@@ -1031,7 +1042,7 @@
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
- msleep(10);
+ usleep_range(10000, 20000);
/* Unhook test interrupt handler */
free_irq(irq, netdev);
@@ -1406,7 +1417,7 @@
*/
#define E1000_SERDES_LB_ON 0x410
ew32(SCTL, E1000_SERDES_LB_ON);
- msleep(10);
+ usleep_range(10000, 20000);
return 0;
}
@@ -1501,7 +1512,7 @@
hw->phy.media_type == e1000_media_type_internal_serdes) {
#define E1000_SERDES_LB_OFF 0x400
ew32(SCTL, E1000_SERDES_LB_OFF);
- msleep(10);
+ usleep_range(10000, 20000);
break;
}
/* Fall Through */
@@ -1851,64 +1862,35 @@
return 0;
}
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define E1000_ID_INTERVAL (HZ/4)
-
-/* bit defines for adapter->led_status */
-#define E1000_LED_ON 0
-
-void e1000e_led_blink_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, led_blink_task);
-
- if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
- adapter->hw.mac.ops.led_off(&adapter->hw);
- else
- adapter->hw.mac.ops.led_on(&adapter->hw);
-}
-
-static void e1000_led_blink_callback(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
- schedule_work(&adapter->led_blink_task);
- mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-}
-
-static int e1000_phys_id(struct net_device *netdev, u32 data)
+static int e1000_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if (!data)
- data = INT_MAX;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ if (!hw->mac.ops.blink_led)
+ return 2; /* cycle on/off twice per second */
- if ((hw->phy.type == e1000_phy_ife) ||
- (hw->mac.type == e1000_pchlan) ||
- (hw->mac.type == e1000_pch2lan) ||
- (hw->mac.type == e1000_82583) ||
- (hw->mac.type == e1000_82574)) {
- if (!adapter->blink_timer.function) {
- init_timer(&adapter->blink_timer);
- adapter->blink_timer.function =
- e1000_led_blink_callback;
- adapter->blink_timer.data = (unsigned long) adapter;
- }
- mod_timer(&adapter->blink_timer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&adapter->blink_timer);
+ hw->mac.ops.blink_led(hw);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
if (hw->phy.type == e1000_phy_ife)
e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
- } else {
- e1000e_blink_led(hw);
- msleep_interruptible(data * 1000);
+ hw->mac.ops.led_off(hw);
+ hw->mac.ops.cleanup_led(hw);
+ break;
+
+ case ETHTOOL_ID_ON:
+ adapter->hw.mac.ops.led_on(&adapter->hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ adapter->hw.mac.ops.led_off(&adapter->hw);
+ break;
}
-
- hw->mac.ops.led_off(hw);
- clear_bit(E1000_LED_ON, &adapter->led_status);
- hw->mac.ops.cleanup_led(hw);
-
return 0;
}
@@ -2020,6 +2002,31 @@
}
}
+static int e1000e_set_flags(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ bool need_reset = false;
+ int rc;
+
+ need_reset = (data & ETH_FLAG_RXVLAN) !=
+ (netdev->features & NETIF_F_HW_VLAN_RX);
+
+ rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
+ ETH_FLAG_TXVLAN);
+
+ if (rc)
+ return rc;
+
+ if (need_reset) {
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ }
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
@@ -2049,12 +2056,13 @@
.set_tso = e1000_set_tso,
.self_test = e1000_diag_test,
.get_strings = e1000_get_strings,
- .phys_id = e1000_phys_id,
+ .set_phys_id = e1000_set_phys_id,
.get_ethtool_stats = e1000_get_ethtool_stats,
.get_sset_count = e1000e_get_sset_count,
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
.get_flags = ethtool_op_get_flags,
+ .set_flags = e1000e_set_flags,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 307e1ec..6c2fa83 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -756,6 +756,7 @@
/* Function pointers and static data for the MAC. */
struct e1000_mac_operations {
s32 (*id_led_init)(struct e1000_hw *);
+ s32 (*blink_led)(struct e1000_hw *);
bool (*check_mng_mode)(struct e1000_hw *);
s32 (*check_for_link)(struct e1000_hw *);
s32 (*cleanup_led)(struct e1000_hw *);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index ce1dbfd..3369d1f 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,7 +338,7 @@
/* Ungate automatic PHY configuration on non-managed 82579 */
if ((hw->mac.type == e1000_pch2lan) &&
!(fwsm & E1000_ICH_FWSM_FW_VALID)) {
- msleep(10);
+ usleep_range(10000, 20000);
e1000_gate_hw_phy_config_ich8lan(hw, false);
}
@@ -427,7 +427,7 @@
phy->id = 0;
while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
(i++ < 100)) {
- msleep(1);
+ usleep_range(1000, 2000);
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
return ret_val;
@@ -564,6 +564,8 @@
mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
/* ID LED init */
mac->ops.id_led_init = e1000e_id_led_init;
+ /* blink LED */
+ mac->ops.blink_led = e1000e_blink_led_generic;
/* setup LED */
mac->ops.setup_led = e1000e_setup_led_generic;
/* cleanup LED */
@@ -767,6 +769,8 @@
(!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ hw->mac.ops.blink_led = NULL;
}
if ((adapter->hw.mac.type == e1000_ich8lan) &&
@@ -1704,7 +1708,7 @@
goto out;
/* Allow time for h/w to get to quiescent state after reset */
- msleep(10);
+ usleep_range(10000, 20000);
/* Perform any necessary post-reset workarounds */
switch (hw->mac.type) {
@@ -1737,7 +1741,7 @@
if (hw->mac.type == e1000_pch2lan) {
/* Ungate automatic PHY configuration on non-managed 82579 */
if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
- msleep(10);
+ usleep_range(10000, 20000);
e1000_gate_hw_phy_config_ich8lan(hw, false);
}
@@ -2532,7 +2536,7 @@
*/
if (!ret_val) {
e1000e_reload_nvm(hw);
- msleep(10);
+ usleep_range(10000, 20000);
}
out:
@@ -3009,7 +3013,7 @@
ew32(TCTL, E1000_TCTL_PSP);
e1e_flush();
- msleep(10);
+ usleep_range(10000, 20000);
/* Workaround for ICH8 bit corruption issue in FIFO memory */
if (hw->mac.type == e1000_ich8lan) {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 96921de5..dd8ab05 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -144,7 +144,7 @@
* @hw: pointer to the HW structure
* @rar_count: receive address registers
*
- * Setups the receive address registers by setting the base receive address
+ * Setup the receive address registers by setting the base receive address
* register to the devices MAC address and clearing all the other receive
* address registers to 0.
**/
@@ -868,7 +868,7 @@
* milliseconds even if the other end is doing it in SW).
*/
for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
- msleep(10);
+ usleep_range(10000, 20000);
status = er32(STATUS);
if (status & E1000_STATUS_LU)
break;
@@ -930,7 +930,7 @@
ew32(CTRL, ctrl);
e1e_flush();
- msleep(1);
+ usleep_range(1000, 2000);
/*
* For these adapters, the SW definable pin 1 is set when the optics
@@ -1181,7 +1181,7 @@
* of pause frames. In this case, we had to advertise
* FULL flow control because we could not advertise Rx
* ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
+ * turn OFF the TRANSMISSION of PAUSE frames.
*/
if (hw->fc.requested_mode == e1000_fc_full) {
hw->fc.current_mode = e1000_fc_full;
@@ -1385,7 +1385,7 @@
while (i < AUTO_READ_DONE_TIMEOUT) {
if (er32(EECD) & E1000_EECD_AUTO_RD)
break;
- msleep(1);
+ usleep_range(1000, 2000);
i++;
}
@@ -1530,12 +1530,12 @@
}
/**
- * e1000e_blink_led - Blink LED
+ * e1000e_blink_led_generic - Blink LED
* @hw: pointer to the HW structure
*
* Blink the LEDs which are set to be on.
**/
-s32 e1000e_blink_led(struct e1000_hw *hw)
+s32 e1000e_blink_led_generic(struct e1000_hw *hw)
{
u32 ledctl_blink = 0;
u32 i;
@@ -2087,8 +2087,6 @@
if (ret_val)
return ret_val;
- msleep(10);
-
while (widx < words) {
u8 write_opcode = NVM_WRITE_OPCODE_SPI;
@@ -2132,7 +2130,7 @@
}
}
- msleep(10);
+ usleep_range(10000, 20000);
nvm->ops.release(hw);
return 0;
}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 506a0a0..0939040 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -58,6 +58,8 @@
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
+
static const struct e1000_info *e1000_info_tbl[] = {
[board_82571] = &e1000_82571_info,
[board_82572] = &e1000_82572_info,
@@ -459,13 +461,13 @@
struct net_device *netdev, struct sk_buff *skb,
u8 status, __le16 vlan)
{
+ u16 tag = le16_to_cpu(vlan);
skb->protocol = eth_type_trans(skb, netdev);
- if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
- vlan_gro_receive(&adapter->napi, adapter->vlgrp,
- le16_to_cpu(vlan), skb);
- else
- napi_gro_receive(&adapter->napi, skb);
+ if (status & E1000_RXD_STAT_VP)
+ __vlan_hwaccel_put_tag(skb, tag);
+
+ napi_gro_receive(&adapter->napi, skb);
}
/**
@@ -2433,6 +2435,8 @@
vfta |= (1 << (vid & 0x1F));
hw->mac.ops.write_vfta(hw, index, vfta);
}
+
+ set_bit(vid, adapter->active_vlans);
}
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -2441,13 +2445,6 @@
struct e1000_hw *hw = &adapter->hw;
u32 vfta, index;
- if (!test_bit(__E1000_DOWN, &adapter->state))
- e1000_irq_disable(adapter);
- vlan_group_set_device(adapter->vlgrp, vid, NULL);
-
- if (!test_bit(__E1000_DOWN, &adapter->state))
- e1000_irq_enable(adapter);
-
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
(vid == adapter->mng_vlan_id)) {
@@ -2463,6 +2460,79 @@
vfta &= ~(1 << (vid & 0x1F));
hw->mac.ops.write_vfta(hw, index, vfta);
}
+
+ clear_bit(vid, adapter->active_vlans);
+}
+
+/**
+ * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
+ ew32(RCTL, rctl);
+
+ if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+}
+
+/**
+ * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_VFE;
+ rctl &= ~E1000_RCTL_CFIEN;
+ ew32(RCTL, rctl);
+ }
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl;
+
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl;
+
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
}
static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
@@ -2471,85 +2541,24 @@
u16 vid = adapter->hw.mng_cookie.vlan_id;
u16 old_vid = adapter->mng_vlan_id;
- if (!adapter->vlgrp)
- return;
-
- if (!vlan_group_get_device(adapter->vlgrp, vid)) {
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
- e1000_vlan_rx_add_vid(netdev, vid);
- adapter->mng_vlan_id = vid;
- }
-
- if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
- (vid != old_vid) &&
- !vlan_group_get_device(adapter->vlgrp, old_vid))
- e1000_vlan_rx_kill_vid(netdev, old_vid);
- } else {
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ e1000_vlan_rx_add_vid(netdev, vid);
adapter->mng_vlan_id = vid;
}
-}
-
-static void e1000_vlan_rx_register(struct net_device *netdev,
- struct vlan_group *grp)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, rctl;
-
- if (!test_bit(__E1000_DOWN, &adapter->state))
- e1000_irq_disable(adapter);
- adapter->vlgrp = grp;
-
- if (grp) {
- /* enable VLAN tag insert/strip */
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_VME;
- ew32(CTRL, ctrl);
-
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
- /* enable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_CFIEN;
- ew32(RCTL, rctl);
- e1000_update_mng_vlan(adapter);
- }
- } else {
- /* disable VLAN tag insert/strip */
- ctrl = er32(CTRL);
- ctrl &= ~E1000_CTRL_VME;
- ew32(CTRL, ctrl);
-
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
- if (adapter->mng_vlan_id !=
- (u16)E1000_MNG_VLAN_NONE) {
- e1000_vlan_rx_kill_vid(netdev,
- adapter->mng_vlan_id);
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- }
- }
- }
-
- if (!test_bit(__E1000_DOWN, &adapter->state))
- e1000_irq_enable(adapter);
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
}
static void e1000_restore_vlan(struct e1000_adapter *adapter)
{
u16 vid;
- e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+ e1000_vlan_rx_add_vid(adapter->netdev, 0);
- if (!adapter->vlgrp)
- return;
-
- for (vid = 0; vid < VLAN_N_VID; vid++) {
- if (!vlan_group_get_device(adapter->vlgrp, vid))
- continue;
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
e1000_vlan_rx_add_vid(adapter->netdev, vid);
- }
}
static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
@@ -2902,7 +2911,7 @@
rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e1e_flush();
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->flags2 & FLAG2_DMA_BURST) {
/*
@@ -3039,6 +3048,8 @@
if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
rctl &= ~E1000_RCTL_VFE;
+ /* Do not hardware filter VLANs in promisc mode */
+ e1000e_vlan_filter_disable(adapter);
} else {
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
@@ -3046,8 +3057,7 @@
} else {
rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
}
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
- rctl |= E1000_RCTL_VFE;
+ e1000e_vlan_filter_enable(adapter);
}
ew32(RCTL, rctl);
@@ -3072,6 +3082,11 @@
*/
e1000_update_mc_addr_list(hw, NULL, 0);
}
+
+ if (netdev->features & NETIF_F_HW_VLAN_RX)
+ e1000e_vlan_strip_enable(adapter);
+ else
+ e1000e_vlan_strip_disable(adapter);
}
/**
@@ -3383,7 +3398,7 @@
ew32(TCTL, tctl);
/* flush both disables and wait for them to finish */
e1e_flush();
- msleep(10);
+ usleep_range(10000, 20000);
napi_disable(&adapter->napi);
e1000_irq_disable(adapter);
@@ -3418,7 +3433,7 @@
{
might_sleep();
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
e1000e_down(adapter);
e1000e_up(adapter);
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -3721,10 +3736,8 @@
* kill manageability vlan ID if supported, but not if a vlan with
* the same ID is registered on the host OS (let 8021q kill it)
*/
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
- !(adapter->vlgrp &&
- vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
/*
@@ -4328,7 +4341,6 @@
link_up:
spin_lock(&adapter->stats64_lock);
e1000e_update_stats(adapter);
- spin_unlock(&adapter->stats64_lock);
mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
adapter->tpt_old = adapter->stats.tpt;
@@ -4339,6 +4351,7 @@
adapter->gorc_old = adapter->stats.gorc;
adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
adapter->gotc_old = adapter->stats.gotc;
+ spin_unlock(&adapter->stats64_lock);
e1000e_update_adaptive(&adapter->hw);
@@ -5028,7 +5041,7 @@
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
adapter->max_frame_size = max_frame;
e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
@@ -5373,7 +5386,7 @@
pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
}
#endif
-void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
{
dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
(state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
@@ -5393,13 +5406,19 @@
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u16 aspm_disable_flag = 0;
u32 err;
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+ aspm_disable_flag = PCIE_LINK_STATE_L0S;
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+ aspm_disable_flag |= PCIE_LINK_STATE_L1;
+ if (aspm_disable_flag)
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
+
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_save_state(pdev);
- if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
- e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
@@ -5643,11 +5662,17 @@
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u16 aspm_disable_flag = 0;
int err;
pci_ers_result_t result;
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+ aspm_disable_flag = PCIE_LINK_STATE_L0S;
if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
- e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
+ aspm_disable_flag |= PCIE_LINK_STATE_L1;
+ if (aspm_disable_flag)
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
+
err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
@@ -5714,7 +5739,7 @@
u8 pba_str[E1000_PBANUM_LENGTH];
/* print bus type/speed/width info */
- e_info("(PCI Express:2.5GB/s:%s) %pM\n",
+ e_info("(PCI Express:2.5GT/s:%s) %pM\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
"Width x1"),
@@ -5759,7 +5784,6 @@
.ndo_tx_timeout = e1000_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
- .ndo_vlan_rx_register = e1000_vlan_rx_register,
.ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -5789,12 +5813,17 @@
resource_size_t flash_start, flash_len;
static int cards_found;
+ u16 aspm_disable_flag = 0;
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
+ aspm_disable_flag = PCIE_LINK_STATE_L0S;
if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
- e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
+ aspm_disable_flag |= PCIE_LINK_STATE_L1;
+ if (aspm_disable_flag)
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
err = pci_enable_device_mem(pdev);
if (err)
@@ -5991,7 +6020,6 @@
INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
- INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
@@ -6124,7 +6152,6 @@
cancel_work_sync(&adapter->watchdog_task);
cancel_work_sync(&adapter->downshift_task);
cancel_work_sync(&adapter->update_phy_task);
- cancel_work_sync(&adapter->led_blink_task);
cancel_work_sync(&adapter->print_hang_task);
if (!(netdev->flags & IFF_UP))
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 6ae31fc..484774c 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2372,7 +2372,7 @@
ret_val = 0;
goto out;
}
- msleep(1);
+ usleep_range(1000, 2000);
i++;
} while (i < 10);
}
@@ -2740,7 +2740,7 @@
e1e_rphy(hw, PHY_CONTROL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
e1e_wphy(hw, PHY_CONTROL, mii_reg);
- msleep(1);
+ usleep_range(1000, 2000);
}
/**
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index eb35951..dfeb006 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1703,7 +1703,7 @@
cmd->advertising |= ADVERTISED_AUI;
}
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
if (dev->if_port == TPE && lp->word[1] & ee_Duplex) {
cmd->duplex = DUPLEX_FULL;
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 3e2e734..7f642ae 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -34,6 +34,7 @@
static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct ehea_port *port = netdev_priv(dev);
+ u32 speed;
int ret;
ret = ehea_sense_port_attr(port);
@@ -43,27 +44,44 @@
if (netif_carrier_ok(dev)) {
switch (port->port_speed) {
- case EHEA_SPEED_10M: cmd->speed = SPEED_10; break;
- case EHEA_SPEED_100M: cmd->speed = SPEED_100; break;
- case EHEA_SPEED_1G: cmd->speed = SPEED_1000; break;
- case EHEA_SPEED_10G: cmd->speed = SPEED_10000; break;
+ case EHEA_SPEED_10M:
+ speed = SPEED_10;
+ break;
+ case EHEA_SPEED_100M:
+ speed = SPEED_100;
+ break;
+ case EHEA_SPEED_1G:
+ speed = SPEED_1000;
+ break;
+ case EHEA_SPEED_10G:
+ speed = SPEED_10000;
+ break;
+ default:
+ speed = -1;
+ break; /* BUG */
}
cmd->duplex = port->full_duplex == 1 ?
DUPLEX_FULL : DUPLEX_HALF;
} else {
- cmd->speed = -1;
+ speed = ~0;
cmd->duplex = -1;
}
+ ethtool_cmd_speed_set(cmd, speed);
- cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full
- | SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half
- | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half
- | SUPPORTED_Autoneg | SUPPORTED_FIBRE);
+ if (cmd->speed == SPEED_10000) {
+ cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
+ cmd->port = PORT_FIBRE;
+ } else {
+ cmd->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_10baseT_Full
+ | SUPPORTED_10baseT_Half | SUPPORTED_Autoneg
+ | SUPPORTED_TP);
+ cmd->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg
+ | ADVERTISED_TP);
+ cmd->port = PORT_TP;
+ }
- cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg
- | ADVERTISED_FIBRE);
-
- cmd->port = PORT_FIBRE;
cmd->autoneg = port->autoneg == 1 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
return 0;
@@ -162,11 +180,6 @@
port->msg_enable = value;
}
-static u32 ehea_get_rx_csum(struct net_device *dev)
-{
- return 1;
-}
-
static char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = {
{"sig_comp_iv"},
{"swqe_refill_th"},
@@ -263,34 +276,16 @@
}
-static int ehea_set_flags(struct net_device *dev, u32 data)
-{
- /* Avoid changing the VLAN flags */
- if ((data & (ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN)) !=
- (ethtool_op_get_flags(dev) & (ETH_FLAG_RXVLAN |
- ETH_FLAG_TXVLAN))){
- return -EINVAL;
- }
-
- return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO
- | ETH_FLAG_TXVLAN
- | ETH_FLAG_RXVLAN);
-}
-
const struct ethtool_ops ehea_ethtool_ops = {
.get_settings = ehea_get_settings,
.get_drvinfo = ehea_get_drvinfo,
.get_msglevel = ehea_get_msglevel,
.set_msglevel = ehea_set_msglevel,
.get_link = ethtool_op_get_link,
- .set_tso = ethtool_op_set_tso,
.get_strings = ehea_get_strings,
.get_sset_count = ehea_get_sset_count,
.get_ethtool_stats = ehea_get_ethtool_stats,
- .get_rx_csum = ehea_get_rx_csum,
.set_settings = ehea_set_settings,
- .get_flags = ethtool_op_get_flags,
- .set_flags = ehea_set_flags,
.nway_reset = ehea_nway_reset, /* Restart autonegotiation */
};
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f75d314..6a0a8fc 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -41,6 +41,7 @@
#include <linux/memory.h>
#include <asm/kexec.h>
#include <linux/mutex.h>
+#include <linux/prefetch.h>
#include <net/ip.h>
@@ -2688,9 +2689,6 @@
netif_start_queue(dev);
}
- init_waitqueue_head(&port->swqe_avail_wq);
- init_waitqueue_head(&port->restart_wq);
-
mutex_unlock(&port->port_lock);
return ret;
@@ -3040,11 +3038,14 @@
if (dev->flags & IFF_UP) {
mutex_lock(&port->port_lock);
- port_napi_enable(port);
ret = ehea_restart_qps(dev);
- check_sqs(port);
- if (!ret)
+ if (!ret) {
+ check_sqs(port);
+ port_napi_enable(port);
netif_wake_queue(dev);
+ } else {
+ netdev_err(dev, "Unable to restart QPS\n");
+ }
mutex_unlock(&port->port_lock);
}
}
@@ -3262,10 +3263,12 @@
dev->netdev_ops = &ehea_netdev_ops;
ehea_set_ethtool_ops(dev);
+ dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
+ | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX | NETIF_F_LRO;
dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
| NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX
| NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
- | NETIF_F_LLTX;
+ | NETIF_F_LLTX | NETIF_F_RXCSUM;
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
if (use_lro)
@@ -3273,6 +3276,9 @@
INIT_WORK(&port->reset_task, ehea_reset_port);
+ init_waitqueue_head(&port->swqe_avail_wq);
+ init_waitqueue_head(&port->restart_wq);
+
ret = register_netdev(dev);
if (ret) {
pr_err("register_netdev failed. ret=%d\n", ret);
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 907b05a..2837ce2 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1488,7 +1488,7 @@
cmd->supported = SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_TP;
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
cmd->port = PORT_TP;
cmd->autoneg = AUTONEG_DISABLE;
@@ -1499,7 +1499,8 @@
static int
enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+ return enc28j60_setlink(dev, cmd->autoneg,
+ ethtool_cmd_speed(cmd), cmd->duplex);
}
static u32 enc28j60_get_msglevel(struct net_device *dev)
diff --git a/drivers/net/enic/Makefile b/drivers/net/enic/Makefile
index 2e573be..9d4974b 100644
--- a/drivers/net/enic/Makefile
+++ b/drivers/net/enic/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_ENIC) := enic.o
enic-y := enic_main.o vnic_cq.o vnic_intr.o vnic_wq.o \
- enic_res.o enic_dev.o vnic_dev.o vnic_rq.o vnic_vic.o
+ enic_res.o enic_dev.o enic_pp.o vnic_dev.o vnic_rq.o vnic_vic.o
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 3a3c3c8..38b351c 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -32,7 +32,7 @@
#define DRV_NAME "enic"
#define DRV_DESCRIPTION "Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION "2.1.1.12"
+#define DRV_VERSION "2.1.1.13"
#define DRV_COPYRIGHT "Copyright 2008-2011 Cisco Systems, Inc"
#define ENIC_BARS_MAX 6
@@ -84,7 +84,6 @@
unsigned int flags;
unsigned int mc_count;
unsigned int uc_count;
- int csum_rx_enabled;
u32 port_mtu;
u32 rx_coalesce_usecs;
u32 tx_coalesce_usecs;
@@ -120,4 +119,6 @@
return &(enic->pdev->dev);
}
+void enic_reset_addr_lists(struct enic *enic);
+
#endif /* _ENIC_H_ */
diff --git a/drivers/net/enic/enic_dev.c b/drivers/net/enic/enic_dev.c
index 37ad3a1..90687b1 100644
--- a/drivers/net/enic/enic_dev.c
+++ b/drivers/net/enic/enic_dev.c
@@ -177,24 +177,24 @@
return err;
}
-int enic_dev_init_prov(struct enic *enic, struct vic_provinfo *vp)
+int enic_dev_init_prov2(struct enic *enic, struct vic_provinfo *vp)
{
int err;
spin_lock(&enic->devcmd_lock);
- err = vnic_dev_init_prov(enic->vdev,
+ err = vnic_dev_init_prov2(enic->vdev,
(u8 *)vp, vic_provinfo_size(vp));
spin_unlock(&enic->devcmd_lock);
return err;
}
-int enic_dev_init_done(struct enic *enic, int *done, int *error)
+int enic_dev_deinit_done(struct enic *enic, int *status)
{
int err;
spin_lock(&enic->devcmd_lock);
- err = vnic_dev_init_done(enic->vdev, done, error);
+ err = vnic_dev_deinit_done(enic->vdev, status);
spin_unlock(&enic->devcmd_lock);
return err;
@@ -219,3 +219,57 @@
enic_del_vlan(enic, vid);
spin_unlock(&enic->devcmd_lock);
}
+
+int enic_dev_enable2(struct enic *enic, int active)
+{
+ int err;
+
+ spin_lock(&enic->devcmd_lock);
+ err = vnic_dev_enable2(enic->vdev, active);
+ spin_unlock(&enic->devcmd_lock);
+
+ return err;
+}
+
+int enic_dev_enable2_done(struct enic *enic, int *status)
+{
+ int err;
+
+ spin_lock(&enic->devcmd_lock);
+ err = vnic_dev_enable2_done(enic->vdev, status);
+ spin_unlock(&enic->devcmd_lock);
+
+ return err;
+}
+
+int enic_dev_status_to_errno(int devcmd_status)
+{
+ switch (devcmd_status) {
+ case ERR_SUCCESS:
+ return 0;
+ case ERR_EINVAL:
+ return -EINVAL;
+ case ERR_EFAULT:
+ return -EFAULT;
+ case ERR_EPERM:
+ return -EPERM;
+ case ERR_EBUSY:
+ return -EBUSY;
+ case ERR_ECMDUNKNOWN:
+ case ERR_ENOTSUPPORTED:
+ return -EOPNOTSUPP;
+ case ERR_EBADSTATE:
+ return -EINVAL;
+ case ERR_ENOMEM:
+ return -ENOMEM;
+ case ERR_ETIMEDOUT:
+ return -ETIMEDOUT;
+ case ERR_ELINKDOWN:
+ return -ENETDOWN;
+ case ERR_EINPROGRESS:
+ return -EINPROGRESS;
+ case ERR_EMAXRES:
+ default:
+ return (devcmd_status < 0) ? devcmd_status : -1;
+ }
+}
diff --git a/drivers/net/enic/enic_dev.h b/drivers/net/enic/enic_dev.h
index 495f57f..d5f6813 100644
--- a/drivers/net/enic/enic_dev.h
+++ b/drivers/net/enic/enic_dev.h
@@ -35,7 +35,10 @@
int enic_dev_enable(struct enic *enic);
int enic_dev_disable(struct enic *enic);
int enic_vnic_dev_deinit(struct enic *enic);
-int enic_dev_init_prov(struct enic *enic, struct vic_provinfo *vp);
-int enic_dev_init_done(struct enic *enic, int *done, int *error);
+int enic_dev_init_prov2(struct enic *enic, struct vic_provinfo *vp);
+int enic_dev_deinit_done(struct enic *enic, int *status);
+int enic_dev_enable2(struct enic *enic, int arg);
+int enic_dev_enable2_done(struct enic *enic, int *status);
+int enic_dev_status_to_errno(int devcmd_status);
#endif /* _ENIC_DEV_H_ */
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 8b9cad5..3d99b0f 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -45,6 +45,7 @@
#include "enic_res.h"
#include "enic.h"
#include "enic_dev.h"
+#include "enic_pp.h"
#define ENIC_NOTIFY_TIMER_PERIOD (2 * HZ)
#define WQ_ENET_MAX_DESC_LEN (1 << WQ_ENET_LEN_BITS)
@@ -179,10 +180,10 @@
ecmd->transceiver = XCVR_EXTERNAL;
if (netif_carrier_ok(netdev)) {
- ecmd->speed = vnic_dev_port_speed(enic->vdev);
+ ethtool_cmd_speed_set(ecmd, vnic_dev_port_speed(enic->vdev));
ecmd->duplex = DUPLEX_FULL;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -250,56 +251,6 @@
*(data++) = ((u64 *)&vstats->rx)[enic_rx_stats[i].offset];
}
-static u32 enic_get_rx_csum(struct net_device *netdev)
-{
- struct enic *enic = netdev_priv(netdev);
- return enic->csum_rx_enabled;
-}
-
-static int enic_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct enic *enic = netdev_priv(netdev);
-
- if (data && !ENIC_SETTING(enic, RXCSUM))
- return -EINVAL;
-
- enic->csum_rx_enabled = !!data;
-
- return 0;
-}
-
-static int enic_set_tx_csum(struct net_device *netdev, u32 data)
-{
- struct enic *enic = netdev_priv(netdev);
-
- if (data && !ENIC_SETTING(enic, TXCSUM))
- return -EINVAL;
-
- if (data)
- netdev->features |= NETIF_F_HW_CSUM;
- else
- netdev->features &= ~NETIF_F_HW_CSUM;
-
- return 0;
-}
-
-static int enic_set_tso(struct net_device *netdev, u32 data)
-{
- struct enic *enic = netdev_priv(netdev);
-
- if (data && !ENIC_SETTING(enic, TSO))
- return -EINVAL;
-
- if (data)
- netdev->features |=
- NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN;
- else
- netdev->features &=
- ~(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN);
-
- return 0;
-}
-
static u32 enic_get_msglevel(struct net_device *netdev)
{
struct enic *enic = netdev_priv(netdev);
@@ -387,17 +338,8 @@
.get_strings = enic_get_strings,
.get_sset_count = enic_get_sset_count,
.get_ethtool_stats = enic_get_ethtool_stats,
- .get_rx_csum = enic_get_rx_csum,
- .set_rx_csum = enic_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = enic_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = enic_set_tso,
.get_coalesce = enic_get_coalesce,
.set_coalesce = enic_set_coalesce,
- .get_flags = ethtool_op_get_flags,
};
static void enic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf)
@@ -874,7 +816,7 @@
return net_stats;
}
-static void enic_reset_addr_lists(struct enic *enic)
+void enic_reset_addr_lists(struct enic *enic)
{
enic->mc_count = 0;
enic->uc_count = 0;
@@ -1112,157 +1054,77 @@
return -EINVAL;
}
-static int enic_set_port_profile(struct enic *enic, u8 *mac)
-{
- struct vic_provinfo *vp;
- u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
- u16 os_type = VIC_GENERIC_PROV_OS_TYPE_LINUX;
- char uuid_str[38];
- char client_mac_str[18];
- u8 *client_mac;
- int err;
-
- err = enic_vnic_dev_deinit(enic);
- if (err)
- return err;
-
- enic_reset_addr_lists(enic);
-
- switch (enic->pp.request) {
-
- case PORT_REQUEST_ASSOCIATE:
-
- if (!(enic->pp.set & ENIC_SET_NAME) || !strlen(enic->pp.name))
- return -EINVAL;
-
- if (!is_valid_ether_addr(mac))
- return -EADDRNOTAVAIL;
-
- vp = vic_provinfo_alloc(GFP_KERNEL, oui,
- VIC_PROVINFO_GENERIC_TYPE);
- if (!vp)
- return -ENOMEM;
-
- vic_provinfo_add_tlv(vp,
- VIC_GENERIC_PROV_TLV_PORT_PROFILE_NAME_STR,
- strlen(enic->pp.name) + 1, enic->pp.name);
-
- if (!is_zero_ether_addr(enic->pp.mac_addr))
- client_mac = enic->pp.mac_addr;
- else
- client_mac = mac;
-
- vic_provinfo_add_tlv(vp,
- VIC_GENERIC_PROV_TLV_CLIENT_MAC_ADDR,
- ETH_ALEN, client_mac);
-
- sprintf(client_mac_str, "%pM", client_mac);
- vic_provinfo_add_tlv(vp,
- VIC_GENERIC_PROV_TLV_CLUSTER_PORT_UUID_STR,
- sizeof(client_mac_str), client_mac_str);
-
- if (enic->pp.set & ENIC_SET_INSTANCE) {
- sprintf(uuid_str, "%pUB", enic->pp.instance_uuid);
- vic_provinfo_add_tlv(vp,
- VIC_GENERIC_PROV_TLV_CLIENT_UUID_STR,
- sizeof(uuid_str), uuid_str);
- }
-
- if (enic->pp.set & ENIC_SET_HOST) {
- sprintf(uuid_str, "%pUB", enic->pp.host_uuid);
- vic_provinfo_add_tlv(vp,
- VIC_GENERIC_PROV_TLV_HOST_UUID_STR,
- sizeof(uuid_str), uuid_str);
- }
-
- os_type = htons(os_type);
- vic_provinfo_add_tlv(vp,
- VIC_GENERIC_PROV_TLV_OS_TYPE,
- sizeof(os_type), &os_type);
-
- err = enic_dev_init_prov(enic, vp);
- vic_provinfo_free(vp);
- if (err)
- return err;
- break;
-
- case PORT_REQUEST_DISASSOCIATE:
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Set flag to indicate that the port assoc/disassoc
- * request has been sent out to fw
- */
- enic->pp.set |= ENIC_PORT_REQUEST_APPLIED;
-
- return 0;
-}
-
static int enic_set_vf_port(struct net_device *netdev, int vf,
struct nlattr *port[])
{
struct enic *enic = netdev_priv(netdev);
- struct enic_port_profile new_pp;
- int err = 0;
-
- memset(&new_pp, 0, sizeof(new_pp));
-
- if (port[IFLA_PORT_REQUEST]) {
- new_pp.set |= ENIC_SET_REQUEST;
- new_pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
- }
-
- if (port[IFLA_PORT_PROFILE]) {
- new_pp.set |= ENIC_SET_NAME;
- memcpy(new_pp.name, nla_data(port[IFLA_PORT_PROFILE]),
- PORT_PROFILE_MAX);
- }
-
- if (port[IFLA_PORT_INSTANCE_UUID]) {
- new_pp.set |= ENIC_SET_INSTANCE;
- memcpy(new_pp.instance_uuid,
- nla_data(port[IFLA_PORT_INSTANCE_UUID]), PORT_UUID_MAX);
- }
-
- if (port[IFLA_PORT_HOST_UUID]) {
- new_pp.set |= ENIC_SET_HOST;
- memcpy(new_pp.host_uuid,
- nla_data(port[IFLA_PORT_HOST_UUID]), PORT_UUID_MAX);
- }
+ struct enic_port_profile prev_pp;
+ int err = 0, restore_pp = 1;
/* don't support VFs, yet */
if (vf != PORT_SELF_VF)
return -EOPNOTSUPP;
- if (!(new_pp.set & ENIC_SET_REQUEST))
+ if (!port[IFLA_PORT_REQUEST])
return -EOPNOTSUPP;
- if (new_pp.request == PORT_REQUEST_ASSOCIATE) {
- /* Special case handling */
- if (!is_zero_ether_addr(enic->pp.vf_mac))
- memcpy(new_pp.mac_addr, enic->pp.vf_mac, ETH_ALEN);
+ memcpy(&prev_pp, &enic->pp, sizeof(enic->pp));
+ memset(&enic->pp, 0, sizeof(enic->pp));
+
+ enic->pp.set |= ENIC_SET_REQUEST;
+ enic->pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
+
+ if (port[IFLA_PORT_PROFILE]) {
+ enic->pp.set |= ENIC_SET_NAME;
+ memcpy(enic->pp.name, nla_data(port[IFLA_PORT_PROFILE]),
+ PORT_PROFILE_MAX);
+ }
+
+ if (port[IFLA_PORT_INSTANCE_UUID]) {
+ enic->pp.set |= ENIC_SET_INSTANCE;
+ memcpy(enic->pp.instance_uuid,
+ nla_data(port[IFLA_PORT_INSTANCE_UUID]), PORT_UUID_MAX);
+ }
+
+ if (port[IFLA_PORT_HOST_UUID]) {
+ enic->pp.set |= ENIC_SET_HOST;
+ memcpy(enic->pp.host_uuid,
+ nla_data(port[IFLA_PORT_HOST_UUID]), PORT_UUID_MAX);
+ }
+
+ /* Special case handling: mac came from IFLA_VF_MAC */
+ if (!is_zero_ether_addr(prev_pp.vf_mac))
+ memcpy(enic->pp.mac_addr, prev_pp.vf_mac, ETH_ALEN);
if (is_zero_ether_addr(netdev->dev_addr))
random_ether_addr(netdev->dev_addr);
+
+ err = enic_process_set_pp_request(enic, &prev_pp, &restore_pp);
+ if (err) {
+ if (restore_pp) {
+ /* Things are still the way they were: Implicit
+ * DISASSOCIATE failed
+ */
+ memcpy(&enic->pp, &prev_pp, sizeof(enic->pp));
+ } else {
+ memset(&enic->pp, 0, sizeof(enic->pp));
+ memset(netdev->dev_addr, 0, ETH_ALEN);
+ }
+ } else {
+ /* Set flag to indicate that the port assoc/disassoc
+ * request has been sent out to fw
+ */
+ enic->pp.set |= ENIC_PORT_REQUEST_APPLIED;
+
+ /* If DISASSOCIATE, clean up all assigned/saved macaddresses */
+ if (enic->pp.request == PORT_REQUEST_DISASSOCIATE) {
+ memset(enic->pp.mac_addr, 0, ETH_ALEN);
+ memset(netdev->dev_addr, 0, ETH_ALEN);
+ }
}
- memcpy(&enic->pp, &new_pp, sizeof(struct enic_port_profile));
-
- err = enic_set_port_profile(enic, netdev->dev_addr);
- if (err)
- goto set_port_profile_cleanup;
-
-set_port_profile_cleanup:
memset(enic->pp.vf_mac, 0, ETH_ALEN);
- if (err || enic->pp.request == PORT_REQUEST_DISASSOCIATE) {
- memset(netdev->dev_addr, 0, ETH_ALEN);
- memset(enic->pp.mac_addr, 0, ETH_ALEN);
- }
-
return err;
}
@@ -1270,34 +1132,15 @@
struct sk_buff *skb)
{
struct enic *enic = netdev_priv(netdev);
- int err, error, done;
u16 response = PORT_PROFILE_RESPONSE_SUCCESS;
+ int err;
if (!(enic->pp.set & ENIC_PORT_REQUEST_APPLIED))
return -ENODATA;
- err = enic_dev_init_done(enic, &done, &error);
+ err = enic_process_get_pp_request(enic, enic->pp.request, &response);
if (err)
- error = err;
-
- switch (error) {
- case ERR_SUCCESS:
- if (!done)
- response = PORT_PROFILE_RESPONSE_INPROGRESS;
- break;
- case ERR_EINVAL:
- response = PORT_PROFILE_RESPONSE_INVALID;
- break;
- case ERR_EBADSTATE:
- response = PORT_PROFILE_RESPONSE_BADSTATE;
- break;
- case ERR_ENOMEM:
- response = PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES;
- break;
- default:
- response = PORT_PROFILE_RESPONSE_ERROR;
- break;
- }
+ return err;
NLA_PUT_U16(skb, IFLA_PORT_REQUEST, enic->pp.request);
NLA_PUT_U16(skb, IFLA_PORT_RESPONSE, response);
@@ -1407,7 +1250,7 @@
skb_put(skb, bytes_written);
skb->protocol = eth_type_trans(skb, netdev);
- if (enic->csum_rx_enabled && !csum_not_calc) {
+ if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) {
skb->csum = htons(checksum);
skb->ip_summed = CHECKSUM_COMPLETE;
}
@@ -2536,17 +2379,18 @@
dev_info(dev, "loopback tag=0x%04x\n", enic->loop_tag);
}
if (ENIC_SETTING(enic, TXCSUM))
- netdev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+ netdev->hw_features |= NETIF_F_SG | NETIF_F_HW_CSUM;
if (ENIC_SETTING(enic, TSO))
- netdev->features |= NETIF_F_TSO |
+ netdev->hw_features |= NETIF_F_TSO |
NETIF_F_TSO6 | NETIF_F_TSO_ECN;
- if (ENIC_SETTING(enic, LRO))
- netdev->features |= NETIF_F_GRO;
+ if (ENIC_SETTING(enic, RXCSUM))
+ netdev->hw_features |= NETIF_F_RXCSUM;
+
+ netdev->features |= netdev->hw_features;
+
if (using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- enic->csum_rx_enabled = ENIC_SETTING(enic, RXCSUM);
-
err = register_netdev(netdev);
if (err) {
dev_err(dev, "Cannot register net device, aborting\n");
diff --git a/drivers/net/enic/enic_pp.c b/drivers/net/enic/enic_pp.c
new file mode 100644
index 0000000..ffaa75d
--- /dev/null
+++ b/drivers/net/enic/enic_pp.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2011 Cisco Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/ip.h>
+
+#include "vnic_vic.h"
+#include "enic_res.h"
+#include "enic.h"
+#include "enic_dev.h"
+
+static int enic_set_port_profile(struct enic *enic)
+{
+ struct net_device *netdev = enic->netdev;
+ struct vic_provinfo *vp;
+ const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
+ const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+ char uuid_str[38];
+ char client_mac_str[18];
+ u8 *client_mac;
+ int err;
+
+ if (!(enic->pp.set & ENIC_SET_NAME) || !strlen(enic->pp.name))
+ return -EINVAL;
+
+ vp = vic_provinfo_alloc(GFP_KERNEL, oui,
+ VIC_PROVINFO_GENERIC_TYPE);
+ if (!vp)
+ return -ENOMEM;
+
+ VIC_PROVINFO_ADD_TLV(vp,
+ VIC_GENERIC_PROV_TLV_PORT_PROFILE_NAME_STR,
+ strlen(enic->pp.name) + 1, enic->pp.name);
+
+ if (!is_zero_ether_addr(enic->pp.mac_addr))
+ client_mac = enic->pp.mac_addr;
+ else
+ client_mac = netdev->dev_addr;
+
+ VIC_PROVINFO_ADD_TLV(vp,
+ VIC_GENERIC_PROV_TLV_CLIENT_MAC_ADDR,
+ ETH_ALEN, client_mac);
+
+ snprintf(client_mac_str, sizeof(client_mac_str), "%pM", client_mac);
+ VIC_PROVINFO_ADD_TLV(vp,
+ VIC_GENERIC_PROV_TLV_CLUSTER_PORT_UUID_STR,
+ sizeof(client_mac_str), client_mac_str);
+
+ if (enic->pp.set & ENIC_SET_INSTANCE) {
+ sprintf(uuid_str, "%pUB", enic->pp.instance_uuid);
+ VIC_PROVINFO_ADD_TLV(vp,
+ VIC_GENERIC_PROV_TLV_CLIENT_UUID_STR,
+ sizeof(uuid_str), uuid_str);
+ }
+
+ if (enic->pp.set & ENIC_SET_HOST) {
+ sprintf(uuid_str, "%pUB", enic->pp.host_uuid);
+ VIC_PROVINFO_ADD_TLV(vp,
+ VIC_GENERIC_PROV_TLV_HOST_UUID_STR,
+ sizeof(uuid_str), uuid_str);
+ }
+
+ VIC_PROVINFO_ADD_TLV(vp,
+ VIC_GENERIC_PROV_TLV_OS_TYPE,
+ sizeof(os_type), &os_type);
+
+ err = enic_dev_status_to_errno(enic_dev_init_prov2(enic, vp));
+
+add_tlv_failure:
+ vic_provinfo_free(vp);
+
+ return err;
+}
+
+static int enic_unset_port_profile(struct enic *enic)
+{
+ int err;
+
+ err = enic_vnic_dev_deinit(enic);
+ if (err)
+ return enic_dev_status_to_errno(err);
+
+ enic_reset_addr_lists(enic);
+
+ return 0;
+}
+
+static int enic_are_pp_different(struct enic_port_profile *pp1,
+ struct enic_port_profile *pp2)
+{
+ return strcmp(pp1->name, pp2->name) | !!memcmp(pp1->instance_uuid,
+ pp2->instance_uuid, PORT_UUID_MAX) |
+ !!memcmp(pp1->host_uuid, pp2->host_uuid, PORT_UUID_MAX) |
+ !!memcmp(pp1->mac_addr, pp2->mac_addr, ETH_ALEN);
+}
+
+static int enic_pp_preassociate(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp);
+static int enic_pp_disassociate(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp);
+static int enic_pp_preassociate_rr(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp);
+static int enic_pp_associate(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp);
+
+static int (*enic_pp_handlers[])(struct enic *enic,
+ struct enic_port_profile *prev_state, int *restore_pp) = {
+ [PORT_REQUEST_PREASSOCIATE] = enic_pp_preassociate,
+ [PORT_REQUEST_PREASSOCIATE_RR] = enic_pp_preassociate_rr,
+ [PORT_REQUEST_ASSOCIATE] = enic_pp_associate,
+ [PORT_REQUEST_DISASSOCIATE] = enic_pp_disassociate,
+};
+
+static const int enic_pp_handlers_count =
+ sizeof(enic_pp_handlers)/sizeof(*enic_pp_handlers);
+
+static int enic_pp_preassociate(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp)
+{
+ return -EOPNOTSUPP;
+}
+
+static int enic_pp_disassociate(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp)
+{
+ return enic_unset_port_profile(enic);
+}
+
+static int enic_pp_preassociate_rr(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp)
+{
+ int err;
+ int active = 0;
+
+ if (enic->pp.request != PORT_REQUEST_ASSOCIATE) {
+ /* If pre-associate is not part of an associate.
+ We always disassociate first */
+ err = enic_pp_handlers[PORT_REQUEST_DISASSOCIATE](enic,
+ prev_pp, restore_pp);
+ if (err)
+ return err;
+
+ *restore_pp = 0;
+ }
+
+ *restore_pp = 0;
+
+ err = enic_set_port_profile(enic);
+ if (err)
+ return err;
+
+ /* If pre-associate is not part of an associate. */
+ if (enic->pp.request != PORT_REQUEST_ASSOCIATE)
+ err = enic_dev_status_to_errno(enic_dev_enable2(enic, active));
+
+ return err;
+}
+
+static int enic_pp_associate(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp)
+{
+ int err;
+ int active = 1;
+
+ /* Check if a pre-associate was called before */
+ if (prev_pp->request != PORT_REQUEST_PREASSOCIATE_RR ||
+ (prev_pp->request == PORT_REQUEST_PREASSOCIATE_RR &&
+ enic_are_pp_different(prev_pp, &enic->pp))) {
+ err = enic_pp_handlers[PORT_REQUEST_DISASSOCIATE](
+ enic, prev_pp, restore_pp);
+ if (err)
+ return err;
+
+ *restore_pp = 0;
+ }
+
+ err = enic_pp_handlers[PORT_REQUEST_PREASSOCIATE_RR](
+ enic, prev_pp, restore_pp);
+ if (err)
+ return err;
+
+ *restore_pp = 0;
+
+ return enic_dev_status_to_errno(enic_dev_enable2(enic, active));
+}
+
+int enic_process_set_pp_request(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp)
+{
+ if (enic->pp.request < enic_pp_handlers_count
+ && enic_pp_handlers[enic->pp.request])
+ return enic_pp_handlers[enic->pp.request](enic,
+ prev_pp, restore_pp);
+ else
+ return -EOPNOTSUPP;
+}
+
+int enic_process_get_pp_request(struct enic *enic, int request,
+ u16 *response)
+{
+ int err, status = ERR_SUCCESS;
+
+ switch (request) {
+
+ case PORT_REQUEST_PREASSOCIATE_RR:
+ case PORT_REQUEST_ASSOCIATE:
+ err = enic_dev_enable2_done(enic, &status);
+ break;
+
+ case PORT_REQUEST_DISASSOCIATE:
+ err = enic_dev_deinit_done(enic, &status);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (err)
+ status = err;
+
+ switch (status) {
+ case ERR_SUCCESS:
+ *response = PORT_PROFILE_RESPONSE_SUCCESS;
+ break;
+ case ERR_EINVAL:
+ *response = PORT_PROFILE_RESPONSE_INVALID;
+ break;
+ case ERR_EBADSTATE:
+ *response = PORT_PROFILE_RESPONSE_BADSTATE;
+ break;
+ case ERR_ENOMEM:
+ *response = PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES;
+ break;
+ case ERR_EINPROGRESS:
+ *response = PORT_PROFILE_RESPONSE_INPROGRESS;
+ break;
+ default:
+ *response = PORT_PROFILE_RESPONSE_ERROR;
+ break;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/enic/enic_pp.h b/drivers/net/enic/enic_pp.h
new file mode 100644
index 0000000..699e365
--- /dev/null
+++ b/drivers/net/enic/enic_pp.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2011 Cisco Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _ENIC_PP_H_
+#define _ENIC_PP_H_
+
+int enic_process_set_pp_request(struct enic *enic,
+ struct enic_port_profile *prev_pp, int *restore_pp);
+int enic_process_get_pp_request(struct enic *enic, int request,
+ u16 *response);
+
+#endif /* _ENIC_PP_H_ */
diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c
index f111a37..6e5c635 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/enic/enic_res.c
@@ -98,9 +98,9 @@
"vNIC MAC addr %pM wq/rq %d/%d mtu %d\n",
enic->mac_addr, c->wq_desc_count, c->rq_desc_count, c->mtu);
dev_info(enic_get_dev(enic), "vNIC csum tx/rx %d/%d "
- "tso/lro %d/%d intr timer %d usec rss %d\n",
+ "tso %d intr timer %d usec rss %d\n",
ENIC_SETTING(enic, TXCSUM), ENIC_SETTING(enic, RXCSUM),
- ENIC_SETTING(enic, TSO), ENIC_SETTING(enic, LRO),
+ ENIC_SETTING(enic, TSO),
c->intr_timer_usec, ENIC_SETTING(enic, RSS));
return 0;
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index c089b36..68f24ae 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -786,48 +786,6 @@
return r;
}
-int vnic_dev_init_done(struct vnic_dev *vdev, int *done, int *err)
-{
- u64 a0 = 0, a1 = 0;
- int wait = 1000;
- int ret;
-
- *done = 0;
-
- ret = vnic_dev_cmd(vdev, CMD_INIT_STATUS, &a0, &a1, wait);
- if (ret)
- return ret;
-
- *done = (a0 == 0);
-
- *err = (a0 == 0) ? (int)a1:0;
-
- return 0;
-}
-
-int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len)
-{
- u64 a0, a1 = len;
- int wait = 1000;
- dma_addr_t prov_pa;
- void *prov_buf;
- int ret;
-
- prov_buf = pci_alloc_consistent(vdev->pdev, len, &prov_pa);
- if (!prov_buf)
- return -ENOMEM;
-
- memcpy(prov_buf, buf, len);
-
- a0 = prov_pa;
-
- ret = vnic_dev_cmd(vdev, CMD_INIT_PROV_INFO, &a0, &a1, wait);
-
- pci_free_consistent(vdev->pdev, len, prov_buf, prov_pa);
-
- return ret;
-}
-
int vnic_dev_deinit(struct vnic_dev *vdev)
{
u64 a0 = 0, a1 = 0;
@@ -927,4 +885,59 @@
return NULL;
}
+int vnic_dev_init_prov2(struct vnic_dev *vdev, u8 *buf, u32 len)
+{
+ u64 a0, a1 = len;
+ int wait = 1000;
+ dma_addr_t prov_pa;
+ void *prov_buf;
+ int ret;
+ prov_buf = pci_alloc_consistent(vdev->pdev, len, &prov_pa);
+ if (!prov_buf)
+ return -ENOMEM;
+
+ memcpy(prov_buf, buf, len);
+
+ a0 = prov_pa;
+
+ ret = vnic_dev_cmd(vdev, CMD_INIT_PROV_INFO2, &a0, &a1, wait);
+
+ pci_free_consistent(vdev->pdev, len, prov_buf, prov_pa);
+
+ return ret;
+}
+
+int vnic_dev_enable2(struct vnic_dev *vdev, int active)
+{
+ u64 a0, a1 = 0;
+ int wait = 1000;
+
+ a0 = (active ? CMD_ENABLE2_ACTIVE : 0);
+
+ return vnic_dev_cmd(vdev, CMD_ENABLE2, &a0, &a1, wait);
+}
+
+static int vnic_dev_cmd_status(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+ int *status)
+{
+ u64 a0 = cmd, a1 = 0;
+ int wait = 1000;
+ int ret;
+
+ ret = vnic_dev_cmd(vdev, CMD_STATUS, &a0, &a1, wait);
+ if (!ret)
+ *status = (int)a0;
+
+ return ret;
+}
+
+int vnic_dev_enable2_done(struct vnic_dev *vdev, int *status)
+{
+ return vnic_dev_cmd_status(vdev, CMD_ENABLE2, status);
+}
+
+int vnic_dev_deinit_done(struct vnic_dev *vdev, int *status)
+{
+ return vnic_dev_cmd_status(vdev, CMD_DEINIT, status);
+}
diff --git a/drivers/net/enic/vnic_dev.h b/drivers/net/enic/vnic_dev.h
index e837546..cf482a2 100644
--- a/drivers/net/enic/vnic_dev.h
+++ b/drivers/net/enic/vnic_dev.h
@@ -108,8 +108,6 @@
int vnic_dev_open(struct vnic_dev *vdev, int arg);
int vnic_dev_open_done(struct vnic_dev *vdev, int *done);
int vnic_dev_init(struct vnic_dev *vdev, int arg);
-int vnic_dev_init_done(struct vnic_dev *vdev, int *done, int *err);
-int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len);
int vnic_dev_deinit(struct vnic_dev *vdev);
int vnic_dev_hang_reset(struct vnic_dev *vdev, int arg);
int vnic_dev_hang_reset_done(struct vnic_dev *vdev, int *done);
@@ -122,5 +120,9 @@
struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar,
unsigned int num_bars);
+int vnic_dev_init_prov2(struct vnic_dev *vdev, u8 *buf, u32 len);
+int vnic_dev_enable2(struct vnic_dev *vdev, int active);
+int vnic_dev_enable2_done(struct vnic_dev *vdev, int *status);
+int vnic_dev_deinit_done(struct vnic_dev *vdev, int *status);
#endif /* _VNIC_DEV_H_ */
diff --git a/drivers/net/enic/vnic_devcmd.h b/drivers/net/enic/vnic_devcmd.h
index d833a07..c5569bf 100644
--- a/drivers/net/enic/vnic_devcmd.h
+++ b/drivers/net/enic/vnic_devcmd.h
@@ -267,17 +267,62 @@
/*
* As for BY_BDF except a0 is index of hvnlink subordinate vnic
- * or SR-IOV virtual vnic */
+ * or SR-IOV virtual vnic
+ */
CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
/*
- * in: (u64)a0=paddr of buffer to put latest VIC VIF-CONFIG-INFO TLV in
- * (u32)a1=length of buffer in a0
- * out: (u64)a0=paddr of buffer with latest VIC VIF-CONFIG-INFO TLV
- * (u32)a1=actual length of latest VIC VIF-CONFIG-INFO TLV */
+ * For HPP toggle:
+ * adapter-info-get
+ * in: (u64)a0=phsical address of buffer passed in from caller.
+ * (u16)a1=size of buffer specified in a0.
+ * out: (u64)a0=phsical address of buffer passed in from caller.
+ * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
+ * 0 if no VIF-CONFIG-INFO TLV was ever received. */
CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
+
+ /* init_prov_info2:
+ * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
+ * the vnic until CMD_ENABLE2 is issued.
+ * (u64)a0=paddr of vnic_devcmd_provinfo
+ * (u32)a1=sizeof provision info */
+ CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
+
+ /* enable2:
+ * (u32)a0=0 ==> standby
+ * =CMD_ENABLE2_ACTIVE ==> active
+ */
+ CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
+
+ /*
+ * cmd_status:
+ * Returns the status of the specified command
+ * Input:
+ * a0 = command for which status is being queried.
+ * Possible values are:
+ * CMD_SOFT_RESET
+ * CMD_HANG_RESET
+ * CMD_OPEN
+ * CMD_INIT
+ * CMD_INIT_PROV_INFO
+ * CMD_DEINIT
+ * CMD_INIT_PROV_INFO2
+ * CMD_ENABLE2
+ * Output:
+ * if status == STAT_ERROR
+ * a0 = ERR_ENOTSUPPORTED - status for command in a0 is
+ * not supported
+ * if status == STAT_NONE
+ * a0 = status of the devcmd specified in a0 as follows.
+ * ERR_SUCCESS - command in a0 completed successfully
+ * ERR_EINPROGRESS - command in a0 is still in progress
+ */
+ CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
};
+/* CMD_ENABLE2 flags */
+#define CMD_ENABLE2_ACTIVE 0x1
+
/* flags for CMD_OPEN */
#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */
@@ -315,6 +360,8 @@
ERR_ETIMEDOUT = 8,
ERR_ELINKDOWN = 9,
ERR_EMAXRES = 10,
+ ERR_ENOTSUPPORTED = 11,
+ ERR_EINPROGRESS = 12,
};
/*
diff --git a/drivers/net/enic/vnic_vic.c b/drivers/net/enic/vnic_vic.c
index 4725b79..24ef8cd 100644
--- a/drivers/net/enic/vnic_vic.c
+++ b/drivers/net/enic/vnic_vic.c
@@ -23,7 +23,8 @@
#include "vnic_vic.h"
-struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, u8 *oui, u8 type)
+struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, const u8 *oui,
+ const u8 type)
{
struct vic_provinfo *vp;
@@ -47,7 +48,7 @@
}
int vic_provinfo_add_tlv(struct vic_provinfo *vp, u16 type, u16 length,
- void *value)
+ const void *value)
{
struct vic_provinfo_tlv *tlv;
diff --git a/drivers/net/enic/vnic_vic.h b/drivers/net/enic/vnic_vic.h
index f700f5d..9ef81f1 100644
--- a/drivers/net/enic/vnic_vic.h
+++ b/drivers/net/enic/vnic_vic.h
@@ -47,6 +47,7 @@
VIC_GENERIC_PROV_OS_TYPE_ESX = 1,
VIC_GENERIC_PROV_OS_TYPE_LINUX = 2,
VIC_GENERIC_PROV_OS_TYPE_WINDOWS = 3,
+ VIC_GENERIC_PROV_OS_TYPE_SOLARIS = 4,
};
struct vic_provinfo {
@@ -61,14 +62,22 @@
} tlv[0];
} __packed;
+#define VIC_PROVINFO_ADD_TLV(vp, tlvtype, tlvlen, data) \
+ do { \
+ err = vic_provinfo_add_tlv(vp, tlvtype, tlvlen, data); \
+ if (err) \
+ goto add_tlv_failure; \
+ } while (0)
+
#define VIC_PROVINFO_MAX_DATA 1385
#define VIC_PROVINFO_MAX_TLV_DATA (VIC_PROVINFO_MAX_DATA - \
sizeof(struct vic_provinfo))
-struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, u8 *oui, u8 type);
+struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, const u8 *oui,
+ const u8 type);
void vic_provinfo_free(struct vic_provinfo *vp);
int vic_provinfo_add_tlv(struct vic_provinfo *vp, u16 type, u16 length,
- void *value);
+ const void *value);
size_t vic_provinfo_size(struct vic_provinfo *vp);
#endif /* _VNIC_VIC_H_ */
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index 380d061..b5f6173 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1545,7 +1545,7 @@
}
ecmd->supported |= SUPPORTED_10baseT_Half;
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
ecmd->duplex = DUPLEX_HALF;
return 0;
}
@@ -1604,55 +1604,47 @@
return !(cmr & CMR_LINK);
}
-static int ewrk3_phys_id(struct net_device *dev, u32 data)
+static int ewrk3_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct ewrk3_private *lp = netdev_priv(dev);
unsigned long iobase = dev->base_addr;
- unsigned long flags;
u8 cr;
- int count;
- /* Toggle LED 4x per second */
- count = data << 2;
+ spin_lock_irq(&lp->hw_lock);
- spin_lock_irqsave(&lp->hw_lock, flags);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ /* Prevent ISR from twiddling the LED */
+ lp->led_mask = 0;
+ spin_unlock_irq(&lp->hw_lock);
+ return 2; /* cycle on/off twice per second */
- /* Bail if a PHYS_ID is already in progress */
- if (lp->led_mask == 0) {
- spin_unlock_irqrestore(&lp->hw_lock, flags);
- return -EBUSY;
- }
-
- /* Prevent ISR from twiddling the LED */
- lp->led_mask = 0;
-
- while (count--) {
- /* Toggle the LED */
+ case ETHTOOL_ID_ON:
cr = inb(EWRK3_CR);
- outb(cr ^ CR_LED, EWRK3_CR);
+ outb(cr | CR_LED, EWRK3_CR);
+ break;
- /* Wait a little while */
- spin_unlock_irqrestore(&lp->hw_lock, flags);
- msleep(250);
- spin_lock_irqsave(&lp->hw_lock, flags);
+ case ETHTOOL_ID_OFF:
+ cr = inb(EWRK3_CR);
+ outb(cr & ~CR_LED, EWRK3_CR);
+ break;
- /* Exit if we got a signal */
- if (signal_pending(current))
- break;
+ case ETHTOOL_ID_INACTIVE:
+ lp->led_mask = CR_LED;
+ cr = inb(EWRK3_CR);
+ outb(cr & ~CR_LED, EWRK3_CR);
}
+ spin_unlock_irq(&lp->hw_lock);
- lp->led_mask = CR_LED;
- cr = inb(EWRK3_CR);
- outb(cr & ~CR_LED, EWRK3_CR);
- spin_unlock_irqrestore(&lp->hw_lock, flags);
- return signal_pending(current) ? -ERESTARTSYS : 0;
+ return 0;
}
static const struct ethtool_ops ethtool_ops_203 = {
.get_drvinfo = ewrk3_get_drvinfo,
.get_settings = ewrk3_get_settings,
.set_settings = ewrk3_set_settings,
- .phys_id = ewrk3_phys_id,
+ .set_phys_id = ewrk3_set_phys_id,
};
static const struct ethtool_ops ethtool_ops = {
@@ -1660,7 +1652,7 @@
.get_settings = ewrk3_get_settings,
.set_settings = ewrk3_set_settings,
.get_link = ewrk3_get_link,
- .phys_id = ewrk3_phys_id,
+ .set_phys_id = ewrk3_set_phys_id,
};
/*
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index d5ab4da..d09e8b0 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -774,7 +774,6 @@
u32 driver_data;
u32 device_id;
u32 register_size;
- int rx_csum;
u32 mac_in_use;
int mgmt_version;
int mgmt_sema;
@@ -3956,6 +3955,7 @@
static int nv_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct fe_priv *np = netdev_priv(dev);
+ u32 speed;
int adv;
spin_lock_irq(&np->lock);
@@ -3975,23 +3975,26 @@
if (netif_carrier_ok(dev)) {
switch (np->linkspeed & (NVREG_LINKSPEED_MASK)) {
case NVREG_LINKSPEED_10:
- ecmd->speed = SPEED_10;
+ speed = SPEED_10;
break;
case NVREG_LINKSPEED_100:
- ecmd->speed = SPEED_100;
+ speed = SPEED_100;
break;
case NVREG_LINKSPEED_1000:
- ecmd->speed = SPEED_1000;
+ speed = SPEED_1000;
+ break;
+ default:
+ speed = -1;
break;
}
ecmd->duplex = DUPLEX_HALF;
if (np->duplex)
ecmd->duplex = DUPLEX_FULL;
} else {
- ecmd->speed = -1;
+ speed = -1;
ecmd->duplex = -1;
}
-
+ ethtool_cmd_speed_set(ecmd, speed);
ecmd->autoneg = np->autoneg;
ecmd->advertising = ADVERTISED_MII;
@@ -4030,6 +4033,7 @@
static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct fe_priv *np = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(ecmd);
if (ecmd->port != PORT_MII)
return -EINVAL;
@@ -4055,7 +4059,7 @@
/* Note: autonegotiation disable, speed 1000 intentionally
* forbidden - no one should need that. */
- if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+ if (speed != SPEED_10 && speed != SPEED_100)
return -EINVAL;
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
return -EINVAL;
@@ -4139,13 +4143,13 @@
adv = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
- if (ecmd->speed == SPEED_10 && ecmd->duplex == DUPLEX_HALF)
+ if (speed == SPEED_10 && ecmd->duplex == DUPLEX_HALF)
adv |= ADVERTISE_10HALF;
- if (ecmd->speed == SPEED_10 && ecmd->duplex == DUPLEX_FULL)
+ if (speed == SPEED_10 && ecmd->duplex == DUPLEX_FULL)
adv |= ADVERTISE_10FULL;
- if (ecmd->speed == SPEED_100 && ecmd->duplex == DUPLEX_HALF)
+ if (speed == SPEED_100 && ecmd->duplex == DUPLEX_HALF)
adv |= ADVERTISE_100HALF;
- if (ecmd->speed == SPEED_100 && ecmd->duplex == DUPLEX_FULL)
+ if (speed == SPEED_100 && ecmd->duplex == DUPLEX_FULL)
adv |= ADVERTISE_100FULL;
np->pause_flags &= ~(NV_PAUSEFRAME_AUTONEG|NV_PAUSEFRAME_RX_ENABLE|NV_PAUSEFRAME_TX_ENABLE);
if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisements but disable tx pause */
@@ -4264,16 +4268,6 @@
return ret;
}
-static int nv_set_tso(struct net_device *dev, u32 value)
-{
- struct fe_priv *np = netdev_priv(dev);
-
- if ((np->driver_data & DEV_HAS_CHECKSUM))
- return ethtool_op_set_tso(dev, value);
- else
- return -EOPNOTSUPP;
-}
-
static void nv_get_ringparam(struct net_device *dev, struct ethtool_ringparam* ring)
{
struct fe_priv *np = netdev_priv(dev);
@@ -4480,58 +4474,36 @@
return 0;
}
-static u32 nv_get_rx_csum(struct net_device *dev)
+static u32 nv_fix_features(struct net_device *dev, u32 features)
{
- struct fe_priv *np = netdev_priv(dev);
- return np->rx_csum != 0;
+ /* vlan is dependent on rx checksum offload */
+ if (features & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
+ features |= NETIF_F_RXCSUM;
+
+ return features;
}
-static int nv_set_rx_csum(struct net_device *dev, u32 data)
+static int nv_set_features(struct net_device *dev, u32 features)
{
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- int retcode = 0;
+ u32 changed = dev->features ^ features;
- if (np->driver_data & DEV_HAS_CHECKSUM) {
- if (data) {
- np->rx_csum = 1;
+ if (changed & NETIF_F_RXCSUM) {
+ spin_lock_irq(&np->lock);
+
+ if (features & NETIF_F_RXCSUM)
np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
- } else {
- np->rx_csum = 0;
- /* vlan is dependent on rx checksum offload */
- if (!(np->vlanctl_bits & NVREG_VLANCONTROL_ENABLE))
- np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK;
- }
- if (netif_running(dev)) {
- spin_lock_irq(&np->lock);
+ else
+ np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK;
+
+ if (netif_running(dev))
writel(np->txrxctl_bits, base + NvRegTxRxControl);
- spin_unlock_irq(&np->lock);
- }
- } else {
- return -EINVAL;
+
+ spin_unlock_irq(&np->lock);
}
- return retcode;
-}
-
-static int nv_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct fe_priv *np = netdev_priv(dev);
-
- if (np->driver_data & DEV_HAS_CHECKSUM)
- return ethtool_op_set_tx_csum(dev, data);
- else
- return -EOPNOTSUPP;
-}
-
-static int nv_set_sg(struct net_device *dev, u32 data)
-{
- struct fe_priv *np = netdev_priv(dev);
-
- if (np->driver_data & DEV_HAS_CHECKSUM)
- return ethtool_op_set_sg(dev, data);
- else
- return -EOPNOTSUPP;
+ return 0;
}
static int nv_get_sset_count(struct net_device *dev, int sset)
@@ -4896,15 +4868,10 @@
.get_regs_len = nv_get_regs_len,
.get_regs = nv_get_regs,
.nway_reset = nv_nway_reset,
- .set_tso = nv_set_tso,
.get_ringparam = nv_get_ringparam,
.set_ringparam = nv_set_ringparam,
.get_pauseparam = nv_get_pauseparam,
.set_pauseparam = nv_set_pauseparam,
- .get_rx_csum = nv_get_rx_csum,
- .set_rx_csum = nv_set_rx_csum,
- .set_tx_csum = nv_set_tx_csum,
- .set_sg = nv_set_sg,
.get_strings = nv_get_strings,
.get_ethtool_stats = nv_get_ethtool_stats,
.get_sset_count = nv_get_sset_count,
@@ -5235,6 +5202,8 @@
.ndo_start_xmit = nv_start_xmit,
.ndo_tx_timeout = nv_tx_timeout,
.ndo_change_mtu = nv_change_mtu,
+ .ndo_fix_features = nv_fix_features,
+ .ndo_set_features = nv_set_features,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = nv_set_mac_address,
.ndo_set_multicast_list = nv_set_multicast,
@@ -5251,6 +5220,8 @@
.ndo_start_xmit = nv_start_xmit_optimized,
.ndo_tx_timeout = nv_tx_timeout,
.ndo_change_mtu = nv_change_mtu,
+ .ndo_fix_features = nv_fix_features,
+ .ndo_set_features = nv_set_features,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = nv_set_mac_address,
.ndo_set_multicast_list = nv_set_multicast,
@@ -5364,11 +5335,10 @@
np->pkt_limit = NV_PKTLIMIT_2;
if (id->driver_data & DEV_HAS_CHECKSUM) {
- np->rx_csum = 1;
np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- dev->features |= NETIF_F_TSO;
- dev->features |= NETIF_F_GRO;
+ dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_RXCSUM;
+ dev->features |= dev->hw_features;
}
np->vlanctl_bits = 0;
@@ -5384,7 +5354,6 @@
np->pause_flags |= NV_PAUSEFRAME_TX_CAPABLE | NV_PAUSEFRAME_TX_REQ;
}
-
err = -ENOMEM;
np->base = ioremap(addr, np->register_size);
if (!np->base)
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 24cb953..21abb5c 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -956,8 +956,6 @@
.get_link = ethtool_op_get_link,
.get_msglevel = fs_get_msglevel,
.set_msglevel = fs_set_msglevel,
- .set_tx_csum = ethtool_op_set_tx_csum, /* local! */
- .set_sg = ethtool_op_set_sg,
.get_regs = fs_get_regs,
};
@@ -998,8 +996,10 @@
#endif
};
+static struct of_device_id fs_enet_match[];
static int __devinit fs_enet_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct net_device *ndev;
struct fs_enet_private *fep;
struct fs_platform_info *fpi;
@@ -1007,14 +1007,15 @@
const u8 *mac_addr;
int privsize, len, ret = -ENODEV;
- if (!ofdev->dev.of_match)
+ match = of_match_device(fs_enet_match, &ofdev->dev);
+ if (!match)
return -EINVAL;
fpi = kzalloc(sizeof(*fpi), GFP_KERNEL);
if (!fpi)
return -ENOMEM;
- if (!IS_FEC(ofdev->dev.of_match)) {
+ if (!IS_FEC(match)) {
data = of_get_property(ofdev->dev.of_node, "fsl,cpm-command", &len);
if (!data || len != 4)
goto out_free_fpi;
@@ -1049,7 +1050,7 @@
fep->dev = &ofdev->dev;
fep->ndev = ndev;
fep->fpi = fpi;
- fep->ops = ofdev->dev.of_match->data;
+ fep->ops = match->data;
ret = fep->ops->setup_data(ndev);
if (ret)
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 61035fc..b9fbc83 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -226,8 +226,8 @@
}
FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
- FW(fecp, hash_table_high, fep->fec.hthi);
- FW(fecp, hash_table_low, fep->fec.htlo);
+ FW(fecp, grp_hash_table_high, fep->fec.hthi);
+ FW(fecp, grp_hash_table_low, fep->fec.htlo);
}
static void set_multicast_list(struct net_device *dev)
@@ -273,8 +273,8 @@
/*
* Reset all multicast.
*/
- FW(fecp, hash_table_high, fep->fec.hthi);
- FW(fecp, hash_table_low, fep->fec.htlo);
+ FW(fecp, grp_hash_table_high, fep->fec.hthi);
+ FW(fecp, grp_hash_table_low, fep->fec.htlo);
/*
* Set maximum receive buffer size.
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 7e840d3..6a2e150 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -101,17 +101,20 @@
return 0;
}
+static struct of_device_id fs_enet_mdio_fec_match[];
static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct resource res;
struct mii_bus *new_bus;
struct fec_info *fec;
int (*get_bus_freq)(struct device_node *);
int ret = -ENOMEM, clock, speed;
- if (!ofdev->dev.of_match)
+ match = of_match_device(fs_enet_mdio_fec_match, &ofdev->dev);
+ if (!match)
return -EINVAL;
- get_bus_freq = ofdev->dev.of_match->data;
+ get_bus_freq = match->data;
new_bus = mdiobus_alloc();
if (!new_bus)
diff --git a/drivers/net/ftmac100.c b/drivers/net/ftmac100.c
index a316619..9bd7746 100644
--- a/drivers/net/ftmac100.c
+++ b/drivers/net/ftmac100.c
@@ -139,11 +139,11 @@
* that hardware reset completed (what the f*ck).
* We still need to wait for a while.
*/
- usleep_range(500, 1000);
+ udelay(500);
return 0;
}
- usleep_range(1000, 10000);
+ udelay(1000);
}
netdev_err(netdev, "software reset failed\n");
@@ -772,7 +772,7 @@
if ((phycr & FTMAC100_PHYCR_MIIRD) == 0)
return phycr & FTMAC100_PHYCR_MIIRDATA;
- usleep_range(100, 1000);
+ udelay(100);
}
netdev_err(netdev, "mdio read timed out\n");
@@ -801,7 +801,7 @@
if ((phycr & FTMAC100_PHYCR_MIIWR) == 0)
return;
- usleep_range(100, 1000);
+ udelay(100);
}
netdev_err(netdev, "mdio write timed out\n");
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 2a0ad9a..ff60b23 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -365,7 +365,7 @@
gfar_write(®s->rir0, DEFAULT_RIR0);
}
- if (priv->rx_csum_enable)
+ if (ndev->features & NETIF_F_RXCSUM)
rctrl |= RCTRL_CHECKSUMMING;
if (priv->extended_hash) {
@@ -463,6 +463,7 @@
.ndo_start_xmit = gfar_start_xmit,
.ndo_stop = gfar_close,
.ndo_change_mtu = gfar_change_mtu,
+ .ndo_set_features = gfar_set_features,
.ndo_set_multicast_list = gfar_set_multi,
.ndo_tx_timeout = gfar_timeout,
.ndo_do_ioctl = gfar_ioctl,
@@ -513,7 +514,7 @@
/* Returns 1 if incoming frames use an FCB */
static inline int gfar_uses_fcb(struct gfar_private *priv)
{
- return priv->vlgrp || priv->rx_csum_enable ||
+ return priv->vlgrp || (priv->ndev->features & NETIF_F_RXCSUM) ||
(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER);
}
@@ -1030,10 +1031,11 @@
netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll, GFAR_DEV_WEIGHT);
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
- priv->rx_csum_enable = 1;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
- } else
- priv->rx_csum_enable = 0;
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_RXCSUM;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_RXCSUM | NETIF_F_HIGHDMA;
+ }
priv->vlgrp = NULL;
@@ -2697,7 +2699,7 @@
if (priv->padding)
skb_pull(skb, priv->padding);
- if (priv->rx_csum_enable)
+ if (dev->features & NETIF_F_RXCSUM)
gfar_rx_checksum(skb, fcb);
/* Tell the skb what kind of packet this is */
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index b2fe7ed..fc86f51 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -382,23 +382,6 @@
#define BD_LFLAG(flags) ((flags) << 16)
#define BD_LENGTH_MASK 0x0000ffff
-#define CLASS_CODE_UNRECOG 0x00
-#define CLASS_CODE_DUMMY1 0x01
-#define CLASS_CODE_ETHERTYPE1 0x02
-#define CLASS_CODE_ETHERTYPE2 0x03
-#define CLASS_CODE_USER_PROG1 0x04
-#define CLASS_CODE_USER_PROG2 0x05
-#define CLASS_CODE_USER_PROG3 0x06
-#define CLASS_CODE_USER_PROG4 0x07
-#define CLASS_CODE_TCP_IPV4 0x08
-#define CLASS_CODE_UDP_IPV4 0x09
-#define CLASS_CODE_AH_ESP_IPV4 0x0a
-#define CLASS_CODE_SCTP_IPV4 0x0b
-#define CLASS_CODE_TCP_IPV6 0x0c
-#define CLASS_CODE_UDP_IPV6 0x0d
-#define CLASS_CODE_AH_ESP_IPV6 0x0e
-#define CLASS_CODE_SCTP_IPV6 0x0f
-
#define FPR_FILER_MASK 0xFFFFFFFF
#define MAX_FILER_IDX 0xFF
@@ -1100,7 +1083,7 @@
struct device_node *phy_node;
struct device_node *tbi_node;
u32 device_flags;
- unsigned char rx_csum_enable:1,
+ unsigned char
extended_hash:1,
bd_stash_en:1,
rx_filer_enable:1,
@@ -1170,6 +1153,7 @@
extern void gfar_configure_coalescing(struct gfar_private *priv,
unsigned long tx_mask, unsigned long rx_mask);
void gfar_init_sysfs(struct net_device *dev);
+int gfar_set_features(struct net_device *dev, u32 features);
extern const struct ethtool_ops gfar_ethtool_ops;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 3bc8e27..493d743 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -517,15 +517,15 @@
return err;
}
-static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
+int gfar_set_features(struct net_device *dev, u32 features)
{
struct gfar_private *priv = netdev_priv(dev);
unsigned long flags;
int err = 0, i = 0;
+ u32 changed = dev->features ^ features;
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
- return -EOPNOTSUPP;
-
+ if (!(changed & NETIF_F_RXCSUM))
+ return 0;
if (dev->flags & IFF_UP) {
/* Halt TX and RX, and process the frames which
@@ -546,58 +546,15 @@
/* Now we take down the rings to rebuild them */
stop_gfar(dev);
- }
- spin_lock_irqsave(&priv->bflock, flags);
- priv->rx_csum_enable = data;
- spin_unlock_irqrestore(&priv->bflock, flags);
+ dev->features = features;
- if (dev->flags & IFF_UP) {
err = startup_gfar(dev);
netif_tx_wake_all_queues(dev);
}
return err;
}
-static uint32_t gfar_get_rx_csum(struct net_device *dev)
-{
- struct gfar_private *priv = netdev_priv(dev);
-
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
- return 0;
-
- return priv->rx_csum_enable;
-}
-
-static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
-{
- struct gfar_private *priv = netdev_priv(dev);
-
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
- return -EOPNOTSUPP;
-
- netif_tx_lock_bh(dev);
-
- if (data)
- dev->features |= NETIF_F_IP_CSUM;
- else
- dev->features &= ~NETIF_F_IP_CSUM;
-
- netif_tx_unlock_bh(dev);
-
- return 0;
-}
-
-static uint32_t gfar_get_tx_csum(struct net_device *dev)
-{
- struct gfar_private *priv = netdev_priv(dev);
-
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
- return 0;
-
- return (dev->features & NETIF_F_IP_CSUM) != 0;
-}
-
static uint32_t gfar_get_msglevel(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
@@ -645,42 +602,6 @@
}
#endif
-static int gfar_ethflow_to_class(int flow_type, u64 *class)
-{
- switch (flow_type) {
- case TCP_V4_FLOW:
- *class = CLASS_CODE_TCP_IPV4;
- break;
- case UDP_V4_FLOW:
- *class = CLASS_CODE_UDP_IPV4;
- break;
- case AH_V4_FLOW:
- case ESP_V4_FLOW:
- *class = CLASS_CODE_AH_ESP_IPV4;
- break;
- case SCTP_V4_FLOW:
- *class = CLASS_CODE_SCTP_IPV4;
- break;
- case TCP_V6_FLOW:
- *class = CLASS_CODE_TCP_IPV6;
- break;
- case UDP_V6_FLOW:
- *class = CLASS_CODE_UDP_IPV6;
- break;
- case AH_V6_FLOW:
- case ESP_V6_FLOW:
- *class = CLASS_CODE_AH_ESP_IPV6;
- break;
- case SCTP_V6_FLOW:
- *class = CLASS_CODE_SCTP_IPV6;
- break;
- default:
- return 0;
- }
-
- return 1;
-}
-
static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow)
{
u32 fcr = 0x0, fpr = FPR_FILER_MASK;
@@ -778,11 +699,6 @@
case UDP_V6_FLOW:
cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP;
break;
- case IPV4_FLOW:
- cmp_rqfpr = RQFPR_IPV4;
- case IPV6_FLOW:
- cmp_rqfpr = RQFPR_IPV6;
- break;
default:
printk(KERN_ERR "Right now this class is not supported\n");
return 0;
@@ -848,18 +764,9 @@
static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
{
- u64 class;
-
- if (!gfar_ethflow_to_class(cmd->flow_type, &class))
- return -EINVAL;
-
- if (class < CLASS_CODE_USER_PROG1 ||
- class > CLASS_CODE_SCTP_IPV6)
- return -EINVAL;
-
/* write the filer rules here */
if (!gfar_ethflow_to_filer_table(priv, cmd->data, cmd->flow_type))
- return -1;
+ return -EINVAL;
return 0;
}
@@ -894,11 +801,6 @@
.get_strings = gfar_gstrings,
.get_sset_count = gfar_sset_count,
.get_ethtool_stats = gfar_fill_stats,
- .get_rx_csum = gfar_get_rx_csum,
- .get_tx_csum = gfar_get_tx_csum,
- .set_rx_csum = gfar_set_rx_csum,
- .set_tx_csum = gfar_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
.get_msglevel = gfar_get_msglevel,
.set_msglevel = gfar_set_msglevel,
#ifdef CONFIG_PM
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 396ff7d..f181304 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -901,7 +901,7 @@
skb_put(skb, pkt_len);
- if (greth->flags & GRETH_FLAG_RX_CSUM && hw_checksummed(status))
+ if (dev->features & NETIF_F_RXCSUM && hw_checksummed(status))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb_checksum_none_assert(skb);
@@ -1142,41 +1142,6 @@
buff[i] = greth_read_bd(&greth_regs[i]);
}
-static u32 greth_get_rx_csum(struct net_device *dev)
-{
- struct greth_private *greth = netdev_priv(dev);
- return (greth->flags & GRETH_FLAG_RX_CSUM) != 0;
-}
-
-static int greth_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct greth_private *greth = netdev_priv(dev);
-
- spin_lock_bh(&greth->devlock);
-
- if (data)
- greth->flags |= GRETH_FLAG_RX_CSUM;
- else
- greth->flags &= ~GRETH_FLAG_RX_CSUM;
-
- spin_unlock_bh(&greth->devlock);
-
- return 0;
-}
-
-static u32 greth_get_tx_csum(struct net_device *dev)
-{
- return (dev->features & NETIF_F_IP_CSUM) != 0;
-}
-
-static int greth_set_tx_csum(struct net_device *dev, u32 data)
-{
- netif_tx_lock_bh(dev);
- ethtool_op_set_tx_csum(dev, data);
- netif_tx_unlock_bh(dev);
- return 0;
-}
-
static const struct ethtool_ops greth_ethtool_ops = {
.get_msglevel = greth_get_msglevel,
.set_msglevel = greth_set_msglevel,
@@ -1185,10 +1150,6 @@
.get_drvinfo = greth_get_drvinfo,
.get_regs_len = greth_get_regs_len,
.get_regs = greth_get_regs,
- .get_rx_csum = greth_get_rx_csum,
- .set_rx_csum = greth_set_rx_csum,
- .get_tx_csum = greth_get_tx_csum,
- .set_tx_csum = greth_set_tx_csum,
.get_link = ethtool_op_get_link,
};
@@ -1570,9 +1531,10 @@
GRETH_REGSAVE(regs->status, 0xFF);
if (greth->gbit_mac) {
- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_HIGHDMA;
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM;
+ dev->features = dev->hw_features | NETIF_F_HIGHDMA;
greth_netdev_ops.ndo_start_xmit = greth_start_xmit_gbit;
- greth->flags = GRETH_FLAG_RX_CSUM;
}
if (greth->multicast) {
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
index be0f206..9a0040d 100644
--- a/drivers/net/greth.h
+++ b/drivers/net/greth.h
@@ -77,9 +77,6 @@
*/
#define MAX_FRAME_SIZE 1520
-/* Flags */
-#define GRETH_FLAG_RX_CSUM 0x1
-
/* GRETH APB registers */
struct greth_regs {
u32 control;
@@ -133,7 +130,6 @@
unsigned int duplex;
u32 msg_enable;
- u32 flags;
u8 phyaddr;
u8 multicast;
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 80d25ed..a09041a 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -132,13 +132,8 @@
/*
* RX_CHECKSUM turns on card-generated receive checksum generation for
* TCP and UDP packets. Otherwise the upper layers do the calculation.
- * TX_CHECKSUM won't do anything too useful, even if it works. There's no
- * easy mechanism by which to tell the TCP/UDP stack that it need not
- * generate checksums for this device. But if somebody can find a way
- * to get that to work, most of the card work is in here already.
* 3/10/1999 Pete Wyckoff <wyckoff@ca.sandia.gov>
*/
-#undef TX_CHECKSUM
#define RX_CHECKSUM
/* Operational parameters that usually are not changed. */
@@ -630,11 +625,6 @@
SET_NETDEV_DEV(dev, &pdev->dev);
-#ifdef TX_CHECKSUM
- printk("check that skbcopy in ip_queue_xmit isn't happening\n");
- dev->hard_header_len += 8; /* for cksum tag */
-#endif
-
for (i = 0; i < 6; i++)
dev->dev_addr[i] = 1 ? read_eeprom(ioaddr, 4 + i)
: readb(ioaddr + StationAddr + i);
@@ -937,11 +927,7 @@
/* always 1, takes no more time to do it */
writew(0x0001, ioaddr + RxChecksum);
-#ifdef TX_CHECKSUM
- writew(0x0001, ioaddr + TxChecksum);
-#else
writew(0x0000, ioaddr + TxChecksum);
-#endif
writew(0x8000, ioaddr + MACCnfg); /* Soft reset the MAC */
writew(0x215F, ioaddr + MACCnfg);
writew(0x000C, ioaddr + FrameGap0);
@@ -1226,40 +1212,6 @@
}
-#ifdef TX_CHECKSUM
-#define csum_add(it, val) \
-do { \
- it += (u16) (val); \
- if (it & 0xffff0000) { \
- it &= 0xffff; \
- ++it; \
- } \
-} while (0)
- /* printk("add %04x --> %04x\n", val, it); \ */
-
-/* uh->len already network format, do not swap */
-#define pseudo_csum_udp(sum,ih,uh) do { \
- sum = 0; \
- csum_add(sum, (ih)->saddr >> 16); \
- csum_add(sum, (ih)->saddr & 0xffff); \
- csum_add(sum, (ih)->daddr >> 16); \
- csum_add(sum, (ih)->daddr & 0xffff); \
- csum_add(sum, cpu_to_be16(IPPROTO_UDP)); \
- csum_add(sum, (uh)->len); \
-} while (0)
-
-/* swap len */
-#define pseudo_csum_tcp(sum,ih,len) do { \
- sum = 0; \
- csum_add(sum, (ih)->saddr >> 16); \
- csum_add(sum, (ih)->saddr & 0xffff); \
- csum_add(sum, (ih)->daddr >> 16); \
- csum_add(sum, (ih)->daddr & 0xffff); \
- csum_add(sum, cpu_to_be16(IPPROTO_TCP)); \
- csum_add(sum, htons(len)); \
-} while (0)
-#endif
-
static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
@@ -1292,36 +1244,6 @@
hmp->tx_skbuff[entry] = skb;
-#ifdef TX_CHECKSUM
- {
- /* tack on checksum tag */
- u32 tagval = 0;
- struct ethhdr *eh = (struct ethhdr *)skb->data;
- if (eh->h_proto == cpu_to_be16(ETH_P_IP)) {
- struct iphdr *ih = (struct iphdr *)((char *)eh + ETH_HLEN);
- if (ih->protocol == IPPROTO_UDP) {
- struct udphdr *uh
- = (struct udphdr *)((char *)ih + ih->ihl*4);
- u32 offset = ((unsigned char *)uh + 6) - skb->data;
- u32 pseudo;
- pseudo_csum_udp(pseudo, ih, uh);
- pseudo = htons(pseudo);
- printk("udp cksum was %04x, sending pseudo %04x\n",
- uh->check, pseudo);
- uh->check = 0; /* zero out uh->check before card calc */
- /*
- * start at 14 (skip ethhdr), store at offset (uh->check),
- * use pseudo value given.
- */
- tagval = (14 << 24) | (offset << 16) | pseudo;
- } else if (ih->protocol == IPPROTO_TCP) {
- printk("tcp, no auto cksum\n");
- }
- }
- *(u32 *)skb_push(skb, 8) = tagval;
- }
-#endif
-
hmp->tx_ring[entry].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
skb->data, skb->len, PCI_DMA_TODEVICE));
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 8931168..18d8aff 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -516,10 +516,6 @@
memcpy(bpq->dest_addr, bcast_addr, sizeof(bpq_eth_addr));
memcpy(bpq->acpt_addr, bcast_addr, sizeof(bpq_eth_addr));
- err = dev_alloc_name(ndev, ndev->name);
- if (err < 0)
- goto error;
-
err = register_netdevice(ndev);
if (err)
goto error;
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8e10d2f..c52a1df 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -188,14 +188,14 @@
* variables
*/
#ifdef CONFIG_ISA
-static const char *hp100_isa_tbl[] = {
+static const char *const hp100_isa_tbl[] __devinitconst = {
"HWPF150", /* HP J2573 rev A */
"HWP1950", /* HP J2573 */
};
#endif
#ifdef CONFIG_EISA
-static struct eisa_device_id hp100_eisa_tbl[] = {
+static const struct eisa_device_id hp100_eisa_tbl[] __devinitconst = {
{ "HWPF180" }, /* HP J2577 rev A */
{ "HWP1920" }, /* HP 27248B */
{ "HWP1940" }, /* HP J2577 */
@@ -336,7 +336,7 @@
}
#ifdef CONFIG_ISA
-static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
+static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr)
{
const char *sig;
int i;
@@ -372,7 +372,7 @@
* EISA and PCI are handled by device infrastructure.
*/
-static int __init hp100_isa_probe(struct net_device *dev, int addr)
+static int __devinit hp100_isa_probe(struct net_device *dev, int addr)
{
int err = -ENODEV;
@@ -396,7 +396,7 @@
#endif /* CONFIG_ISA */
#if !defined(MODULE) && defined(CONFIG_ISA)
-struct net_device * __init hp100_probe(int unit)
+struct net_device * __devinit hp100_probe(int unit)
{
struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
int err;
@@ -2843,7 +2843,7 @@
}
#ifdef CONFIG_EISA
-static int __init hp100_eisa_probe (struct device *gendev)
+static int __devinit hp100_eisa_probe (struct device *gendev)
{
struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
struct eisa_device *edev = to_eisa_device(gendev);
diff --git a/drivers/net/hydra.c b/drivers/net/hydra.c
index c5ef62c..1cd481c 100644
--- a/drivers/net/hydra.c
+++ b/drivers/net/hydra.c
@@ -98,15 +98,15 @@
.ndo_open = hydra_open,
.ndo_stop = hydra_close,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
@@ -125,7 +125,7 @@
0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
};
- dev = alloc_ei_netdev();
+ dev = ____alloc_ei_netdev(0);
if (!dev)
return -ENOMEM;
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 3bb990b..079450f 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2053,13 +2053,6 @@
mutex_unlock(&dev->link_lock);
}
-static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
-{
- struct emac_instance *dev = netdev_priv(ndev);
-
- return dev->tah_dev != NULL;
-}
-
static int emac_get_regs_len(struct emac_instance *dev)
{
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
@@ -2203,15 +2196,11 @@
.get_ringparam = emac_ethtool_get_ringparam,
.get_pauseparam = emac_ethtool_get_pauseparam,
- .get_rx_csum = emac_ethtool_get_rx_csum,
-
.get_strings = emac_ethtool_get_strings,
.get_sset_count = emac_ethtool_get_sset_count,
.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
.get_link = ethtool_op_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .get_sg = ethtool_op_get_sg,
};
static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
@@ -2859,8 +2848,10 @@
if (err != 0)
goto err_detach_tah;
- if (dev->tah_dev)
- ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ if (dev->tah_dev) {
+ ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG;
+ ndev->features |= ndev->hw_features | NETIF_F_RXCSUM;
+ }
ndev->watchdog_timeo = 5 * HZ;
if (emac_phy_supports_gige(dev->phy_mode)) {
ndev->netdev_ops = &emac_gige_netdev_ops;
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 8ff68ae..136d754 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -782,7 +782,8 @@
/* register resources - only necessary for IRQ */
- result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+ result = request_irq(priv->realirq, irq_handler, IRQF_SHARED,
+ dev->name, dev);
if (result != 0) {
printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq);
return result;
@@ -894,12 +895,12 @@
static int ibmlana_io;
static int startslot; /* counts through slots when probing multiple devices */
-static short ibmlana_adapter_ids[] __initdata = {
+static const short ibmlana_adapter_ids[] __devinitconst = {
IBM_LANA_ID,
0x0000
};
-static char *ibmlana_adapter_names[] __devinitdata = {
+static const char *const ibmlana_adapter_names[] __devinitconst = {
"IBM LAN Adapter/A",
NULL
};
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 5522d45..b388d78 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -710,7 +710,7 @@
SUPPORTED_FIBRE);
cmd->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg |
ADVERTISED_FIBRE);
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_FIBRE;
cmd->phy_address = 0;
@@ -729,45 +729,24 @@
sizeof(info->version) - 1);
}
-static void ibmveth_set_rx_csum_flags(struct net_device *dev, u32 data)
+static u32 ibmveth_fix_features(struct net_device *dev, u32 features)
{
- struct ibmveth_adapter *adapter = netdev_priv(dev);
+ /*
+ * Since the ibmveth firmware interface does not have the
+ * concept of separate tx/rx checksum offload enable, if rx
+ * checksum is disabled we also have to disable tx checksum
+ * offload. Once we disable rx checksum offload, we are no
+ * longer allowed to send tx buffers that are not properly
+ * checksummed.
+ */
- if (data) {
- adapter->rx_csum = 1;
- } else {
- /*
- * Since the ibmveth firmware interface does not have the
- * concept of separate tx/rx checksum offload enable, if rx
- * checksum is disabled we also have to disable tx checksum
- * offload. Once we disable rx checksum offload, we are no
- * longer allowed to send tx buffers that are not properly
- * checksummed.
- */
- adapter->rx_csum = 0;
- dev->features &= ~NETIF_F_IP_CSUM;
- dev->features &= ~NETIF_F_IPV6_CSUM;
- }
+ if (!(features & NETIF_F_RXCSUM))
+ features &= ~NETIF_F_ALL_CSUM;
+
+ return features;
}
-static void ibmveth_set_tx_csum_flags(struct net_device *dev, u32 data)
-{
- struct ibmveth_adapter *adapter = netdev_priv(dev);
-
- if (data) {
- if (adapter->fw_ipv4_csum_support)
- dev->features |= NETIF_F_IP_CSUM;
- if (adapter->fw_ipv6_csum_support)
- dev->features |= NETIF_F_IPV6_CSUM;
- adapter->rx_csum = 1;
- } else {
- dev->features &= ~NETIF_F_IP_CSUM;
- dev->features &= ~NETIF_F_IPV6_CSUM;
- }
-}
-
-static int ibmveth_set_csum_offload(struct net_device *dev, u32 data,
- void (*done) (struct net_device *, u32))
+static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
{
struct ibmveth_adapter *adapter = netdev_priv(dev);
unsigned long set_attr, clr_attr, ret_attr;
@@ -827,8 +806,8 @@
} else
adapter->fw_ipv6_csum_support = data;
- if (ret == H_SUCCESS || ret6 == H_SUCCESS)
- done(dev, data);
+ if (ret != H_SUCCESS || ret6 != H_SUCCESS)
+ adapter->rx_csum = data;
else
rc1 = -EIO;
} else {
@@ -844,41 +823,22 @@
return rc1 ? rc1 : rc2;
}
-static int ibmveth_set_rx_csum(struct net_device *dev, u32 data)
+static int ibmveth_set_features(struct net_device *dev, u32 features)
{
struct ibmveth_adapter *adapter = netdev_priv(dev);
+ int rx_csum = !!(features & NETIF_F_RXCSUM);
+ int rc;
- if ((data && adapter->rx_csum) || (!data && !adapter->rx_csum))
+ if (rx_csum == adapter->rx_csum)
return 0;
- return ibmveth_set_csum_offload(dev, data, ibmveth_set_rx_csum_flags);
-}
-
-static int ibmveth_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct ibmveth_adapter *adapter = netdev_priv(dev);
- int rc = 0;
-
- if (data && (dev->features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)))
- return 0;
- if (!data && !(dev->features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)))
- return 0;
-
- if (data && !adapter->rx_csum)
- rc = ibmveth_set_csum_offload(dev, data,
- ibmveth_set_tx_csum_flags);
- else
- ibmveth_set_tx_csum_flags(dev, data);
+ rc = ibmveth_set_csum_offload(dev, rx_csum);
+ if (rc && !adapter->rx_csum)
+ dev->features = features & ~(NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
return rc;
}
-static u32 ibmveth_get_rx_csum(struct net_device *dev)
-{
- struct ibmveth_adapter *adapter = netdev_priv(dev);
- return adapter->rx_csum;
-}
-
static void ibmveth_get_strings(struct net_device *dev, u32 stringset, u8 *data)
{
int i;
@@ -914,13 +874,9 @@
.get_drvinfo = netdev_get_drvinfo,
.get_settings = netdev_get_settings,
.get_link = ethtool_op_get_link,
- .set_tx_csum = ibmveth_set_tx_csum,
- .get_rx_csum = ibmveth_get_rx_csum,
- .set_rx_csum = ibmveth_set_rx_csum,
.get_strings = ibmveth_get_strings,
.get_sset_count = ibmveth_get_sset_count,
.get_ethtool_stats = ibmveth_get_ethtool_stats,
- .set_sg = ethtool_op_set_sg,
};
static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -1345,6 +1301,8 @@
.ndo_set_multicast_list = ibmveth_set_multicast_list,
.ndo_do_ioctl = ibmveth_ioctl,
.ndo_change_mtu = ibmveth_change_mtu,
+ .ndo_fix_features = ibmveth_fix_features,
+ .ndo_set_features = ibmveth_set_features,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1412,7 +1370,9 @@
netdev->netdev_ops = &ibmveth_netdev_ops;
netdev->ethtool_ops = &netdev_ethtool_ops;
SET_NETDEV_DEV(netdev, &dev->dev);
- netdev->features |= NETIF_F_SG;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ netdev->features |= netdev->hw_features;
memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
@@ -1437,7 +1397,7 @@
netdev_dbg(netdev, "registering netdev...\n");
- ibmveth_set_csum_offload(netdev, 1, ibmveth_set_tx_csum_flags);
+ ibmveth_set_features(netdev, netdev->features);
rc = register_netdev(netdev);
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index e07d487f..4fecaed6 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -233,10 +233,6 @@
if (!dev_ifb)
return -ENOMEM;
- err = dev_alloc_name(dev_ifb, dev_ifb->name);
- if (err < 0)
- goto err;
-
dev_ifb->rtnl_link_ops = &ifb_link_ops;
err = register_netdevice(dev_ifb);
if (err < 0)
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 6b256c2..0f563c8 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -244,6 +244,14 @@
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
+ /*
+ * Check for invalid size
+ */
+ if ((hw->mac.type == e1000_82576) && (size > 15)) {
+ printk("igb: The NVM size is not valid, "
+ "defaulting to 32K.\n");
+ size = 15;
+ }
nvm->word_size = 1 << size;
if (nvm->word_size == (1 << 15))
nvm->page_size = 128;
@@ -1877,7 +1885,7 @@
}
if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
- /* if chekcsums compatibility bit is set validate checksums
+ /* if checksums compatibility bit is set validate checksums
* for all 4 ports. */
eeprom_regions_count = 4;
}
@@ -1988,6 +1996,7 @@
out:
return ret_val;
}
+
/**
* igb_set_eee_i350 - Enable/disable EEE support
* @hw: pointer to the HW structure
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 1c687e2..f4fa4b1 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -360,7 +360,7 @@
extern void igb_down(struct igb_adapter *);
extern void igb_reinit_locked(struct igb_adapter *);
extern void igb_reset(struct igb_adapter *);
-extern int igb_set_spd_dplx(struct igb_adapter *, u16);
+extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
extern int igb_setup_tx_resources(struct igb_ring *);
extern int igb_setup_rx_resources(struct igb_ring *);
extern void igb_free_tx_resources(struct igb_ring *);
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index d976733..fdc895e 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -178,11 +178,11 @@
if ((status & E1000_STATUS_SPEED_1000) ||
hw->phy.media_type != e1000_media_type_copper)
- ecmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
else if (status & E1000_STATUS_SPEED_100)
- ecmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
else
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
if ((status & E1000_STATUS_FD) ||
hw->phy.media_type != e1000_media_type_copper)
@@ -190,7 +190,7 @@
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -223,7 +223,8 @@
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
} else {
- if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
@@ -1963,27 +1964,28 @@
/* bit defines for adapter->led_status */
#define IGB_LED_ON 0
-static int igb_phys_id(struct net_device *netdev, u32 data)
+static int igb_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- unsigned long timeout;
- timeout = data * 1000;
-
- /*
- * msleep_interruptable only accepts unsigned int so we are limited
- * in how long a duration we can wait
- */
- if (!timeout || timeout > UINT_MAX)
- timeout = UINT_MAX;
-
- igb_blink_led(hw);
- msleep_interruptible(timeout);
-
- igb_led_off(hw);
- clear_bit(IGB_LED_ON, &adapter->led_status);
- igb_cleanup_led(hw);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ igb_blink_led(hw);
+ return 2;
+ case ETHTOOL_ID_ON:
+ igb_blink_led(hw);
+ break;
+ case ETHTOOL_ID_OFF:
+ igb_led_off(hw);
+ break;
+ case ETHTOOL_ID_INACTIVE:
+ igb_led_off(hw);
+ clear_bit(IGB_LED_ON, &adapter->led_status);
+ igb_cleanup_led(hw);
+ break;
+ }
return 0;
}
@@ -2215,7 +2217,7 @@
.set_tso = igb_set_tso,
.self_test = igb_diag_test,
.get_strings = igb_get_strings,
- .phys_id = igb_phys_id,
+ .set_phys_id = igb_set_phys_id,
.get_sset_count = igb_get_sset_count,
.get_ethtool_stats = igb_get_ethtool_stats,
.get_coalesce = igb_get_coalesce,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 0dfd1b9..ce7838e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3532,6 +3532,25 @@
return link_active;
}
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+ bool ret = false;
+ u32 ctrl_ext, thstat;
+
+ /* check for thermal sensor event on i350, copper only */
+ if (hw->mac.type == e1000_i350) {
+ thstat = rd32(E1000_THSTAT);
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+ ret = !!(thstat & event);
+ }
+ }
+
+ return ret;
+}
+
/**
* igb_watchdog - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
@@ -3550,7 +3569,7 @@
watchdog_task);
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- u32 link, ctrl_ext, thstat;
+ u32 link;
int i;
link = igb_has_link(adapter);
@@ -3574,25 +3593,14 @@
((ctrl & E1000_CTRL_RFCE) ? "RX" :
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
- /* check for thermal sensor event on i350,
- * copper only */
- if (hw->mac.type == e1000_i350) {
- thstat = rd32(E1000_THSTAT);
- ctrl_ext = rd32(E1000_CTRL_EXT);
- if ((hw->phy.media_type ==
- e1000_media_type_copper) && !(ctrl_ext &
- E1000_CTRL_EXT_LINK_MODE_SGMII)) {
- if (thstat &
- E1000_THSTAT_LINK_THROTTLE) {
- printk(KERN_INFO "igb: %s The "
- "network adapter link "
- "speed was downshifted "
- "because it "
- "overheated.\n",
- netdev->name);
- }
- }
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
+ printk(KERN_INFO "igb: %s The network adapter "
+ "link speed was downshifted "
+ "because it overheated.\n",
+ netdev->name);
}
+
/* adjust timeout factor according to speed/duplex */
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
@@ -3618,22 +3626,15 @@
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- /* check for thermal sensor event on i350
- * copper only*/
- if (hw->mac.type == e1000_i350) {
- thstat = rd32(E1000_THSTAT);
- ctrl_ext = rd32(E1000_CTRL_EXT);
- if ((hw->phy.media_type ==
- e1000_media_type_copper) && !(ctrl_ext &
- E1000_CTRL_EXT_LINK_MODE_SGMII)) {
- if (thstat & E1000_THSTAT_PWR_DOWN) {
- printk(KERN_ERR "igb: %s The "
- "network adapter was stopped "
- "because it overheated.\n",
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
+ printk(KERN_ERR "igb: %s The network adapter "
+ "was stopped because it "
+ "overheated.\n",
netdev->name);
- }
- }
}
+
/* Links status message must follow this format */
printk(KERN_INFO "igb: %s NIC Link is Down\n",
netdev->name);
@@ -6348,21 +6349,25 @@
}
}
-int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
{
struct pci_dev *pdev = adapter->pdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
mac->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NIC's only allow 1000 Gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
- }
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL)
+ goto err_inval;
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
break;
@@ -6381,10 +6386,13 @@
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index 1d943aa..b0b14d6 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -90,18 +90,18 @@
status = er32(STATUS);
if (status & E1000_STATUS_LU) {
if (status & E1000_STATUS_SPEED_1000)
- ecmd->speed = 1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
else if (status & E1000_STATUS_SPEED_100)
- ecmd->speed = 100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
else
- ecmd->speed = 10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
if (status & E1000_STATUS_FD)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -391,11 +391,6 @@
return -EOPNOTSUPP;
}
-static int igbvf_phys_id(struct net_device *netdev, u32 data)
-{
- return 0;
-}
-
static int igbvf_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
@@ -527,7 +522,6 @@
.self_test = igbvf_diag_test,
.get_sset_count = igbvf_get_sset_count,
.get_strings = igbvf_get_strings,
- .phys_id = igbvf_phys_id,
.get_ethtool_stats = igbvf_get_ethtool_stats,
.get_coalesce = igbvf_get_coalesce,
.set_coalesce = igbvf_set_coalesce,
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index c8ee8d2..96c9561 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -90,8 +90,6 @@
u32 emcr, ehar_h, ehar_l;
spinlock_t ioc3_lock;
struct mii_if_info mii;
- unsigned long flags;
-#define IOC3_FLAG_RX_CHECKSUMS 1
struct pci_dev *pdev;
@@ -609,7 +607,7 @@
goto next;
}
- if (likely(ip->flags & IOC3_FLAG_RX_CHECKSUMS))
+ if (likely(dev->features & NETIF_F_RXCSUM))
ioc3_tcpudp_checksum(skb,
w0 & ERXBUF_IPCKSUM_MASK, len);
@@ -1328,6 +1326,7 @@
dev->watchdog_timeo = 5 * HZ;
dev->netdev_ops = &ioc3_netdev_ops;
dev->ethtool_ops = &ioc3_ethtool_ops;
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
dev->features = NETIF_F_IP_CSUM;
sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
@@ -1618,37 +1617,12 @@
return rc;
}
-static u32 ioc3_get_rx_csum(struct net_device *dev)
-{
- struct ioc3_private *ip = netdev_priv(dev);
-
- return ip->flags & IOC3_FLAG_RX_CHECKSUMS;
-}
-
-static int ioc3_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct ioc3_private *ip = netdev_priv(dev);
-
- spin_lock_bh(&ip->ioc3_lock);
- if (data)
- ip->flags |= IOC3_FLAG_RX_CHECKSUMS;
- else
- ip->flags &= ~IOC3_FLAG_RX_CHECKSUMS;
- spin_unlock_bh(&ip->ioc3_lock);
-
- return 0;
-}
-
static const struct ethtool_ops ioc3_ethtool_ops = {
.get_drvinfo = ioc3_get_drvinfo,
.get_settings = ioc3_get_settings,
.set_settings = ioc3_set_settings,
.nway_reset = ioc3_nway_reset,
.get_link = ioc3_get_link,
- .get_rx_csum = ioc3_get_rx_csum,
- .set_rx_csum = ioc3_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum
};
static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 8800e1f..69b5707 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -222,19 +222,19 @@
static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
/* Probing */
-static int __init smsc_ircc_look_for_chips(void);
-static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
-static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
-static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
-static int __init smsc_superio_fdc(unsigned short cfg_base);
-static int __init smsc_superio_lpc(unsigned short cfg_base);
+static int smsc_ircc_look_for_chips(void);
+static const struct smsc_chip * smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
+static int smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
+static int smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
+static int smsc_superio_fdc(unsigned short cfg_base);
+static int smsc_superio_lpc(unsigned short cfg_base);
#ifdef CONFIG_PCI
-static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
-static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static void __init preconfigure_ali_port(struct pci_dev *dev,
+static int preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
+static int preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static void preconfigure_ali_port(struct pci_dev *dev,
unsigned short port);
-static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
+static int preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static int smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
unsigned short ircc_sir,
unsigned char ircc_dma,
@@ -366,7 +366,7 @@
}
/* PNP hotplug support */
-static const struct pnp_device_id smsc_ircc_pnp_table[] = {
+static const struct pnp_device_id smsc_ircc_pnp_table[] __devinitconst = {
{ .id = "SMCf010", .driver_data = 0 },
/* and presumably others */
{ }
@@ -515,7 +515,7 @@
* Try to open driver instance
*
*/
-static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
+static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
{
struct smsc_ircc_cb *self;
struct net_device *dev;
@@ -2273,7 +2273,7 @@
}
-static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
+static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg)
{
IRDA_DEBUG(1, "%s\n", __func__);
@@ -2281,7 +2281,7 @@
return inb(cfg_base) != reg ? -1 : 0;
}
-static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
+static const struct smsc_chip * __devinit smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
{
u8 devid, xdevid, rev;
@@ -2406,7 +2406,7 @@
#ifdef CONFIG_PCI
#define PCIID_VENDOR_INTEL 0x8086
#define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
+static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitconst = {
/*
* Subsystems needing entries:
* 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
@@ -2532,7 +2532,7 @@
* (FIR port, SIR port, FIR DMA, FIR IRQ)
* through the chip configuration port.
*/
-static int __init preconfigure_smsc_chip(struct
+static int __devinit preconfigure_smsc_chip(struct
smsc_ircc_subsystem_configuration
*conf)
{
@@ -2633,7 +2633,7 @@
* or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
* They all work the same way!
*/
-static int __init preconfigure_through_82801(struct pci_dev *dev,
+static int __devinit preconfigure_through_82801(struct pci_dev *dev,
struct
smsc_ircc_subsystem_configuration
*conf)
@@ -2786,7 +2786,7 @@
* This is based on reverse-engineering since ALi does not
* provide any data sheet for the 1533 chip.
*/
-static void __init preconfigure_ali_port(struct pci_dev *dev,
+static void __devinit preconfigure_ali_port(struct pci_dev *dev,
unsigned short port)
{
unsigned char reg;
@@ -2824,7 +2824,7 @@
IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
}
-static int __init preconfigure_through_ali(struct pci_dev *dev,
+static int __devinit preconfigure_through_ali(struct pci_dev *dev,
struct
smsc_ircc_subsystem_configuration
*conf)
@@ -2837,7 +2837,7 @@
return preconfigure_smsc_chip(conf);
}
-static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
+static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
unsigned short ircc_sir,
unsigned char ircc_dma,
@@ -2849,7 +2849,7 @@
int ret = 0;
for_each_pci_dev(dev) {
- struct smsc_ircc_subsystem_configuration *conf;
+ const struct smsc_ircc_subsystem_configuration *conf;
/*
* Cache the subsystem vendor/device:
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 8f3df04..49e8408 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -157,9 +157,6 @@
u16 link_duplex;
struct work_struct tx_timeout_task;
- struct timer_list blink_timer;
- unsigned long led_status;
-
/* TX */
struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
unsigned int restart_queue;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index cc53aa1..6da890b 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -104,10 +104,10 @@
ecmd->transceiver = XCVR_EXTERNAL;
if (netif_carrier_ok(adapter->netdev)) {
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
ecmd->duplex = DUPLEX_FULL;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -129,9 +129,10 @@
ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 speed = ethtool_cmd_speed(ecmd);
if (ecmd->autoneg == AUTONEG_ENABLE ||
- ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
+ (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
return -EINVAL;
if (netif_running(adapter->netdev)) {
@@ -610,46 +611,24 @@
return err;
}
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define IXGB_ID_INTERVAL (HZ/4)
-
-/* bit defines for adapter->led_status */
-#define IXGB_LED_ON 0
-
-static void
-ixgb_led_blink_callback(unsigned long data)
-{
- struct ixgb_adapter *adapter = (struct ixgb_adapter *)data;
-
- if (test_and_change_bit(IXGB_LED_ON, &adapter->led_status))
- ixgb_led_off(&adapter->hw);
- else
- ixgb_led_on(&adapter->hw);
-
- mod_timer(&adapter->blink_timer, jiffies + IXGB_ID_INTERVAL);
-}
-
static int
-ixgb_phys_id(struct net_device *netdev, u32 data)
+ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- if (!data)
- data = INT_MAX;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 2;
- if (!adapter->blink_timer.function) {
- init_timer(&adapter->blink_timer);
- adapter->blink_timer.function = ixgb_led_blink_callback;
- adapter->blink_timer.data = (unsigned long)adapter;
+ case ETHTOOL_ID_ON:
+ ixgb_led_on(&adapter->hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ case ETHTOOL_ID_INACTIVE:
+ ixgb_led_off(&adapter->hw);
}
- mod_timer(&adapter->blink_timer, jiffies);
-
- msleep_interruptible(data * 1000);
- del_timer_sync(&adapter->blink_timer);
- ixgb_led_off(&adapter->hw);
- clear_bit(IXGB_LED_ON, &adapter->led_status);
-
return 0;
}
@@ -766,7 +745,7 @@
.set_msglevel = ixgb_set_msglevel,
.set_tso = ixgb_set_tso,
.get_strings = ixgb_get_strings,
- .phys_id = ixgb_phys_id,
+ .set_phys_id = ixgb_set_phys_id,
.get_sset_count = ixgb_get_sset_count,
.get_ethtool_stats = ixgb_get_ethtool_stats,
.get_flags = ethtool_op_get_flags,
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8d46802..e467b20 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -106,6 +106,7 @@
#define IXGBE_MAX_VF_FUNCTIONS 64
#define IXGBE_MAX_VFTA_ENTRIES 128
#define MAX_EMULATION_MAC_ADDRS 16
+#define IXGBE_MAX_PF_MACVLANS 15
#define VMDQ_P(p) ((p) + adapter->num_vfs)
struct vf_data_storage {
@@ -121,6 +122,15 @@
u16 tx_rate;
};
+struct vf_macvlans {
+ struct list_head l;
+ int vf;
+ int rar_entry;
+ bool free;
+ bool is_macvlan;
+ u8 vf_macvlan[ETH_ALEN];
+};
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
@@ -331,10 +341,52 @@
/* board specific private data structure */
struct ixgbe_adapter {
- struct timer_list watchdog_timer;
+ unsigned long state;
+
+ /* Some features need tri-state capability,
+ * thus the additional *_CAPABLE flags.
+ */
+ u32 flags;
+#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
+#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 1)
+#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 2)
+#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 3)
+#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 4)
+#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 6)
+#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 7)
+#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 8)
+#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 9)
+#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 10)
+#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11)
+#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12)
+#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13)
+#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 14)
+#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16)
+#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17)
+#define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18)
+#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19)
+#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20)
+#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22)
+#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 23)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 24)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 25)
+#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 26)
+#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 27)
+#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 28)
+#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 29)
+
+ u32 flags2;
+#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1)
+#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1)
+#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2)
+#define IXGBE_FLAG2_TEMP_SENSOR_EVENT (u32)(1 << 3)
+#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 4)
+#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 5)
+#define IXGBE_FLAG2_RESET_REQUESTED (u32)(1 << 6)
+#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 7)
+
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
u16 bd_number;
- struct work_struct reset_task;
struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
/* DCB parameters */
@@ -377,43 +429,6 @@
u32 alloc_rx_page_failed;
u32 alloc_rx_buff_failed;
- /* Some features need tri-state capability,
- * thus the additional *_CAPABLE flags.
- */
- u32 flags;
-#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
-#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 1)
-#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 2)
-#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 3)
-#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 4)
-#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 6)
-#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 7)
-#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 8)
-#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 9)
-#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 10)
-#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11)
-#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12)
-#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13)
-#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 14)
-#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16)
-#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17)
-#define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18)
-#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19)
-#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20)
-#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22)
-#define IXGBE_FLAG_IN_SFP_LINK_TASK (u32)(1 << 23)
-#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 24)
-#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 25)
-#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 26)
-#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 27)
-#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 28)
-#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 29)
-#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 30)
-
- u32 flags2;
-#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1)
-#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1)
-#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2)
/* default to trying for four seconds */
#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
@@ -434,7 +449,6 @@
u32 rx_eitr_param;
u32 tx_eitr_param;
- unsigned long state;
u64 tx_busy;
unsigned int tx_ring_count;
unsigned int rx_ring_count;
@@ -443,15 +457,12 @@
bool link_up;
unsigned long link_check_timeout;
- struct work_struct watchdog_task;
- struct work_struct sfp_task;
- struct timer_list sfp_timer;
- struct work_struct multispeed_fiber_task;
- struct work_struct sfp_config_module_task;
+ struct work_struct service_task;
+ struct timer_list service_timer;
u32 fdir_pballoc;
u32 atr_sample_rate;
+ unsigned long fdir_overflow; /* number of times ATR was backed off */
spinlock_t fdir_perfect_lock;
- struct work_struct fdir_reinit_task;
#ifdef IXGBE_FCOE
struct ixgbe_fcoe fcoe;
#endif /* IXGBE_FCOE */
@@ -461,7 +472,7 @@
u16 eeprom_version;
int node;
- struct work_struct check_overtemp_task;
+ u32 led_reg;
u32 interrupt_event;
char lsc_int_name[IFNAMSIZ + 9];
@@ -470,13 +481,17 @@
unsigned int num_vfs;
struct vf_data_storage *vfinfo;
int vf_rate_link_speed;
+ struct vf_macvlans vf_mvs;
+ struct vf_macvlans *mv_list;
+ bool antispoofing_enabled;
};
enum ixbge_state_t {
__IXGBE_TESTING,
__IXGBE_RESETTING,
__IXGBE_DOWN,
- __IXGBE_SFP_MODULE_NOT_FOUND
+ __IXGBE_SERVICE_SCHED,
+ __IXGBE_IN_SFP_INIT,
};
struct ixgbe_rsc_cb {
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 845c679..8179e50 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -37,6 +37,7 @@
#define IXGBE_82598_RAR_ENTRIES 16
#define IXGBE_82598_MC_TBL_SIZE 128
#define IXGBE_82598_VFT_TBL_SIZE 128
+#define IXGBE_82598_RX_PB_SIZE 512
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
@@ -197,14 +198,35 @@
* @hw: pointer to hardware structure
*
* Starts the hardware using the generic start_hw function.
- * Then set pcie completion timeout
+ * Disables relaxed ordering Then set pcie completion timeout
+ *
**/
static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
{
+ u32 regval;
+ u32 i;
s32 ret_val = 0;
ret_val = ixgbe_start_hw_generic(hw);
+ /* Disable relaxed ordering */
+ for (i = 0; ((i < hw->mac.max_tx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+ }
+
+ for (i = 0; ((i < hw->mac.max_rx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
+
/* set the completion timeout for interface */
if (ret_val == 0)
ixgbe_set_pcie_completion_timeout(hw);
@@ -1064,7 +1086,7 @@
sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
break;
- msleep(10);
+ usleep_range(10000, 20000);
}
if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
@@ -1188,6 +1210,38 @@
return physical_layer;
}
+/**
+ * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ * port devices.
+ * @hw: pointer to the HW structure
+ *
+ * Calls common function and corrects issue with some single port devices
+ * that enable LAN1 but not LAN0.
+ **/
+static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u16 pci_gen = 0;
+ u16 pci_ctrl2 = 0;
+
+ ixgbe_set_lan_id_multi_port_pcie(hw);
+
+ /* check if LAN0 is disabled */
+ hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+ if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+ hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+ /* if LAN0 is completely disabled force function to 0 */
+ if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+ bus->func = 0;
+ }
+ }
+}
+
static struct ixgbe_mac_operations mac_ops_82598 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82598,
@@ -1199,7 +1253,7 @@
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
.get_bus_info = &ixgbe_get_bus_info_generic,
- .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598,
.read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
.write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
.setup_link = &ixgbe_setup_mac_link_82598,
@@ -1227,6 +1281,7 @@
static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
.init_params = &ixgbe_init_eeprom_params_generic,
.read = &ixgbe_read_eerd_generic,
+ .read_buffer = &ixgbe_read_eerd_buffer_generic,
.calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 00aeba3..8ee66124 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -38,6 +38,7 @@
#define IXGBE_82599_RAR_ENTRIES 128
#define IXGBE_82599_MC_TBL_SIZE 128
#define IXGBE_82599_VFT_TBL_SIZE 128
+#define IXGBE_82599_RX_PB_SIZE 512
static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
@@ -61,6 +62,7 @@
bool autoneg,
bool autoneg_wait_to_complete);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
@@ -86,7 +88,8 @@
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
- hw->phy.smart_speed == ixgbe_smart_speed_on))
+ hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+ !ixgbe_verify_lesm_fw_enabled_82599(hw))
mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
else
mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
@@ -107,7 +110,6 @@
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
&data_offset);
-
if (ret_val != 0)
goto setup_sfp_out;
@@ -127,9 +129,13 @@
}
/* Release the semaphore */
- ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
- /* Delay obtaining semaphore again to allow FW access */
- msleep(hw->eeprom.semaphore_delay);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ /*
+ * Delay obtaining semaphore again to allow FW access,
+ * semaphore_delay is in ms usleep_range needs us.
+ */
+ usleep_range(hw->eeprom.semaphore_delay * 1000,
+ hw->eeprom.semaphore_delay * 2000);
/* Now restart DSP by setting Restart_AN and clearing LMS */
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
@@ -138,7 +144,7 @@
/* Wait for AN to leave state 0 */
for (i = 0; i < 10; i++) {
- msleep(4);
+ usleep_range(4000, 8000);
reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
break;
@@ -353,6 +359,7 @@
case IXGBE_DEV_ID_82599_SFP:
case IXGBE_DEV_ID_82599_SFP_FCOE:
case IXGBE_DEV_ID_82599_SFP_EM:
+ case IXGBE_DEV_ID_82599_SFP_SF2:
media_type = ixgbe_media_type_fiber;
break;
case IXGBE_DEV_ID_82599_CX4:
@@ -361,6 +368,9 @@
case IXGBE_DEV_ID_82599_T3_LOM:
media_type = ixgbe_media_type_copper;
break;
+ case IXGBE_DEV_ID_82599_LS:
+ media_type = ixgbe_media_type_fiber_lco;
+ break;
default:
media_type = ixgbe_media_type_unknown;
break;
@@ -486,7 +496,7 @@
*
* Set the link speed in the AUTOC register and restarts link.
**/
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete)
@@ -1176,7 +1186,7 @@
if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
IXGBE_FDIRCTRL_INIT_DONE)
break;
- msleep(1);
+ usleep_range(1000, 2000);
}
if (i >= IXGBE_FDIR_INIT_DONE_POLL)
hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
@@ -1271,7 +1281,7 @@
if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
IXGBE_FDIRCTRL_INIT_DONE)
break;
- msleep(1);
+ usleep_range(1000, 2000);
}
if (i >= IXGBE_FDIR_INIT_DONE_POLL)
hw_dbg(hw, "Flow Director Perfect poll time exceeded!\n");
@@ -1740,30 +1750,29 @@
* ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
* @hw: pointer to hardware structure
*
- * Starts the hardware using the generic start_hw function.
- * Then performs device-specific:
- * Clears the rate limiter registers.
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
**/
static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
{
- u32 q_num;
- s32 ret_val;
+ s32 ret_val = 0;
ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != 0)
+ goto out;
- /* Clear the rate limiters */
- for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) {
- IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, q_num);
- IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
- }
- IXGBE_WRITE_FLUSH(hw);
+ ret_val = ixgbe_start_hw_gen2(hw);
+ if (ret_val != 0)
+ goto out;
/* We need to run link autotry after the driver loads */
hw->mac.autotry_restart = true;
+ hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
if (ret_val == 0)
ret_val = ixgbe_verify_fw_version_82599(hw);
-
+out:
return ret_val;
}
@@ -1775,7 +1784,7 @@
* If PHY already detected, maintains current PHY type in hw struct,
* otherwise executes the PHY detection routine.
**/
-s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
@@ -1968,21 +1977,6 @@
}
/**
- * ixgbe_get_device_caps_82599 - Get additional device capabilities
- * @hw: pointer to hardware structure
- * @device_caps: the EEPROM word with the extra device capabilities
- *
- * This function will read the EEPROM location for the device capabilities,
- * and return the word through device_caps.
- **/
-static s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
-{
- hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
-
- return 0;
-}
-
-/**
* ixgbe_verify_fw_version_82599 - verify fw version for 82599
* @hw: pointer to hardware structure
*
@@ -2030,6 +2024,110 @@
return status;
}
+/**
+ * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ * @hw: pointer to hardware structure
+ *
+ * Returns true if the LESM FW module is present and enabled. Otherwise
+ * returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+ bool lesm_enabled = false;
+ u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+ s32 status;
+
+ /* get the offset to the Firmware Module block */
+ status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+ if ((status != 0) ||
+ (fw_offset == 0) || (fw_offset == 0xFFFF))
+ goto out;
+
+ /* get the offset to the LESM Parameters block */
+ status = hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_LESM_PARAMETERS_PTR),
+ &fw_lesm_param_offset);
+
+ if ((status != 0) ||
+ (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
+ goto out;
+
+ /* get the lesm state word */
+ status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+ IXGBE_FW_LESM_STATE_1),
+ &fw_lesm_state);
+
+ if ((status == 0) &&
+ (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+ lesm_enabled = true;
+
+out:
+ return lesm_enabled;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Retrieves 16 bit word(s) read from EEPROM
+ **/
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+ data);
+ else
+ ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+ words,
+ data);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_eeprom_82599 - Read EEPROM word using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+ u16 offset, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+ else
+ ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+ return ret_val;
+}
+
static struct ixgbe_mac_operations mac_ops_82599 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82599,
@@ -2040,7 +2138,7 @@
.enable_rx_dma = &ixgbe_enable_rx_dma_82599,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
- .get_device_caps = &ixgbe_get_device_caps_82599,
+ .get_device_caps = &ixgbe_get_device_caps_generic,
.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
.get_bus_info = &ixgbe_get_bus_info_generic,
@@ -2076,8 +2174,10 @@
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
.init_params = &ixgbe_init_eeprom_params_generic,
- .read = &ixgbe_read_eerd_generic,
+ .read = &ixgbe_read_eeprom_82599,
+ .read_buffer = &ixgbe_read_eeprom_buffer_82599,
.write = &ixgbe_write_eeprom_generic,
+ .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic,
.calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index bcd9529..b894b42 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -54,6 +54,13 @@
static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset);
/**
* ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
@@ -96,6 +103,45 @@
}
/**
+ * ixgbe_start_hw_gen2 - Init sequence for common device family
+ * @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ * 82599
+ * X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 regval;
+
+ /* Clear the rate limiters */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+ }
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Disable relaxed ordering */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+ regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+ }
+
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ return 0;
+}
+
+/**
* ixgbe_init_hw_generic - Generic hardware initialization
* @hw: pointer to hardware structure
*
@@ -464,7 +510,7 @@
reg_val &= ~(IXGBE_RXCTRL_RXEN);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
IXGBE_WRITE_FLUSH(hw);
- msleep(2);
+ usleep_range(2000, 4000);
/* Clear interrupt mask to stop from interrupts being generated */
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
@@ -545,6 +591,8 @@
/* Set default semaphore delay to 10ms which is a well
* tested value */
eeprom->semaphore_delay = 10;
+ /* Clear EEPROM page size, it will be initialized as needed */
+ eeprom->word_page_size = 0;
/*
* Check for EEPROM present first.
@@ -577,26 +625,78 @@
}
/**
- * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to write
+ * @words: number of words
+ * @data: 16 bit word(s) to write to EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /*
+ * The EEPROM page size cannot be queried from the chip. We do lazy
+ * initialization. It is worth to do that when we write large buffer.
+ */
+ if ((hw->eeprom.word_page_size == 0) &&
+ (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+ ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != 0)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be written to
- * @data: 16 bit word to be written to the EEPROM
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to be written to the EEPROM
*
* If ixgbe_eeprom_update_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
**/
-s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
{
s32 status;
+ u16 word;
+ u16 page_size;
+ u16 i;
u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
- hw->eeprom.ops.init_params(hw);
-
- if (offset >= hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
/* Prepare the EEPROM for writing */
status = ixgbe_acquire_eeprom(hw);
@@ -608,54 +708,69 @@
}
if (status == 0) {
- ixgbe_standby_eeprom(hw);
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
- /* Send the WRITE ENABLE command (8 bit opcode ) */
- ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI,
- IXGBE_EEPROM_OPCODE_BITS);
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ ixgbe_shift_out_eeprom_bits(hw,
+ IXGBE_EEPROM_WREN_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_standby_eeprom(hw);
+ ixgbe_standby_eeprom(hw);
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((hw->eeprom.address_bits == 8) && (offset >= 128))
- write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
- /* Send the Write command (8-bit opcode + addr) */
- ixgbe_shift_out_eeprom_bits(hw, write_opcode,
- IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
- hw->eeprom.address_bits);
+ /* Send the Write command (8-bit opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
- /* Send the data */
- data = (data >> 8) | (data << 8);
- ixgbe_shift_out_eeprom_bits(hw, data, 16);
- ixgbe_standby_eeprom(hw);
+ page_size = hw->eeprom.word_page_size;
+ /* Send the data in burst via SPI*/
+ do {
+ word = data[i];
+ word = (word >> 8) | (word << 8);
+ ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+ if (page_size == 0)
+ break;
+
+ /* do not wrap around page */
+ if (((offset + i) & (page_size - 1)) ==
+ (page_size - 1))
+ break;
+ } while (++i < words);
+
+ ixgbe_standby_eeprom(hw);
+ usleep_range(10000, 20000);
+ }
/* Done with writing - release the EEPROM */
ixgbe_release_eeprom(hw);
}
-out:
return status;
}
/**
- * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
* @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit value from EEPROM
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
*
- * Reads 16 bit value from EEPROM through bit-bang method
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
**/
-s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 *data)
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
{
s32 status;
- u16 word_in;
- u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
hw->eeprom.ops.init_params(hw);
@@ -664,6 +779,76 @@
goto out;
}
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit words(s) from EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != 0)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit word(s) from EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word_in;
+ u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+ u16 i;
+
/* Prepare the EEPROM for reading */
status = ixgbe_acquire_eeprom(hw);
@@ -675,29 +860,145 @@
}
if (status == 0) {
- ixgbe_standby_eeprom(hw);
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((hw->eeprom.address_bits == 8) && (offset >= 128))
- read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+ /* Send the READ command (opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
- /* Send the READ command (opcode + addr) */
- ixgbe_shift_out_eeprom_bits(hw, read_opcode,
- IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
- hw->eeprom.address_bits);
-
- /* Read the data. */
- word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
- *data = (word_in >> 8) | (word_in << 8);
+ /* Read the data. */
+ word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
/* End this read operation */
ixgbe_release_eeprom(hw);
}
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of word(s)
+ * @data: 16 bit word(s) from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eerd;
+ s32 status = 0;
+ u32 i;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
+ IXGBE_EEPROM_RW_REG_START;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+ if (status == 0) {
+ data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+ IXGBE_EEPROM_RW_REG_DATA);
+ } else {
+ hw_dbg(hw, "Eeprom read timed out\n");
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ * Discover EEPROM page size by writing marching data at given offset.
+ * This function is called only when we are writing a new large buffer
+ * at given offset so the data would be overwritten anyway.
+ **/
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset)
+{
+ u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+ s32 status = 0;
+ u16 i;
+
+ for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+ data[i] = i;
+
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+ IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+ hw->eeprom.word_page_size = 0;
+ if (status != 0)
+ goto out;
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+ if (status != 0)
+ goto out;
+
+ /*
+ * When writing in burst more than the actual page size
+ * EEPROM address wraps around current page.
+ */
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+ hw_dbg(hw, "Detected EEPROM page size = %d words.",
+ hw->eeprom.word_page_size);
out:
return status;
}
@@ -712,33 +1013,75 @@
**/
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
- u32 eerd;
- s32 status;
+ return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eewr;
+ s32 status = 0;
+ u16 i;
hw->eeprom.ops.init_params(hw);
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
if (offset >= hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
- eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) +
- IXGBE_EEPROM_RW_REG_START;
+ for (i = 0; i < words; i++) {
+ eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+ (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+ IXGBE_EEPROM_RW_REG_START;
- IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != 0) {
+ hw_dbg(hw, "Eeprom write EEWR timed out\n");
+ goto out;
+ }
- if (status == 0)
- *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
- IXGBE_EEPROM_RW_REG_DATA);
- else
- hw_dbg(hw, "Eeprom read timed out\n");
+ IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != 0) {
+ hw_dbg(hw, "Eeprom write EEWR timed out\n");
+ goto out;
+ }
+ }
out:
return status;
}
/**
+ * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
* ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
* @hw: pointer to hardware structure
* @ee_reg: EEPROM flag for polling
@@ -746,7 +1089,7 @@
* Polls the status bit (bit 1) of the EERD or EEWR to determine when the
* read or write is done respectively.
**/
-s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
{
u32 i;
u32 reg;
@@ -846,6 +1189,28 @@
udelay(50);
}
+ if (i == timeout) {
+ hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore "
+ "not granted.\n");
+ /*
+ * this release is particularly important because our attempts
+ * above to get the semaphore may have succeeded, and if there
+ * was a timeout, we should unconditionally clear the semaphore
+ * bits to free the driver to make progress
+ */
+ ixgbe_release_eeprom_semaphore(hw);
+
+ udelay(50);
+ /*
+ * one last try
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI))
+ status = 0;
+ }
+
/* Now get the semaphore between SW/FW through the SWESMBI bit */
if (status == 0) {
for (i = 0; i < timeout; i++) {
@@ -1112,8 +1477,12 @@
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- /* Delay before attempt to obtain semaphore again to allow FW access */
- msleep(hw->eeprom.semaphore_delay);
+ /*
+ * Delay before attempt to obtain semaphore again to allow FW
+ * access. semaphore_delay is in ms we need us for usleep_range
+ */
+ usleep_range(hw->eeprom.semaphore_delay * 1000,
+ hw->eeprom.semaphore_delay * 2000);
}
/**
@@ -2189,7 +2558,7 @@
* thread currently using resource (swmask)
*/
ixgbe_release_eeprom_semaphore(hw);
- msleep(5);
+ usleep_range(5000, 10000);
timeout--;
}
@@ -2263,7 +2632,7 @@
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
autoc_reg |= IXGBE_AUTOC_FLU;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- msleep(10);
+ usleep_range(10000, 20000);
}
led_reg &= ~IXGBE_LED_MODE_MASK(index);
@@ -2883,3 +3252,18 @@
pfvfspoof &= ~(1 << vf_target_shift);
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
}
+
+/**
+ * ixgbe_get_device_caps_generic - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word with the extra device capabilities
+ *
+ * This function will read the EEPROM location for the device capabilities,
+ * and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+ hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+ return 0;
+}
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 508f635..46be83c 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -35,6 +35,7 @@
s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
u32 pba_num_size);
@@ -48,14 +49,22 @@
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 *data);
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
u16 *checksum_val);
s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
-s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
@@ -89,6 +98,7 @@
s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index 1bc57e5..771d01a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -289,7 +289,7 @@
* Configure queue statistics registers, all queues belonging to same traffic
* class uses a single set of queue statistics counters.
*/
-s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
{
u32 reg = 0;
u8 i = 0;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index 025af8c..d50cf78 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -39,36 +39,52 @@
*/
static s32 ixgbe_dcb_config_packet_buffers_82599(struct ixgbe_hw *hw, u8 rx_pba)
{
- s32 ret_val = 0;
- u32 value = IXGBE_RXPBSIZE_64KB;
+ int num_tcs = IXGBE_MAX_PACKET_BUFFERS;
+ u32 rx_pb_size = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
+ u32 rxpktsize;
+ u32 txpktsize;
+ u32 txpbthresh;
u8 i = 0;
- /* Setup Rx packet buffer sizes */
- switch (rx_pba) {
- case pba_80_48:
- /* Setup the first four at 80KB */
- value = IXGBE_RXPBSIZE_80KB;
- for (; i < 4; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value);
- /* Setup the last four at 48KB...don't re-init i */
- value = IXGBE_RXPBSIZE_48KB;
- /* Fall Through */
- case pba_equal:
- default:
- for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value);
-
- /* Setup Tx packet buffer sizes */
- for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i),
- IXGBE_TXPBSIZE_20KB);
- IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i),
- IXGBE_TXPBTHRESH_DCB);
- }
- break;
+ /*
+ * This really means configure the first half of the TCs
+ * (Traffic Classes) to use 5/8 of the Rx packet buffer
+ * space. To determine the size of the buffer for each TC,
+ * we are multiplying the average size by 5/4 and applying
+ * it to half of the traffic classes.
+ */
+ if (rx_pba == pba_80_48) {
+ rxpktsize = (rx_pb_size * 5) / (num_tcs * 4);
+ rx_pb_size -= rxpktsize * (num_tcs / 2);
+ for (; i < (num_tcs / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
}
- return ret_val;
+ /* Divide the remaining Rx packet buffer evenly among the TCs */
+ rxpktsize = rx_pb_size / (num_tcs - i);
+ for (; i < num_tcs; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+
+ /*
+ * Setup Tx packet buffer and threshold equally for all TCs
+ * TXPBTHRESH register is set in K so divide by 1024 and subtract
+ * 10 since the largest packet we support is just over 9K.
+ */
+ txpktsize = IXGBE_TXPBSIZE_MAX / num_tcs;
+ txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
+ for (i = 0; i < num_tcs; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
+ }
+
+ /* Clear unused TCs, if any, to zero buffer size*/
+ for (; i < MAX_TRAFFIC_CLASS; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
+ }
+
+ return 0;
}
/**
@@ -285,12 +301,17 @@
IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg);
/*
* Enable Receive PFC
- * We will always honor XOFF frames we receive when
- * we are in PFC mode.
+ * 82599 will always honor XOFF frames we receive when
+ * we are in PFC mode however X540 only honors enabled
+ * traffic classes.
*/
reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
reg &= ~IXGBE_MFLCN_RFCE;
reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF;
+
+ if (hw->mac.type == ixgbe_mac_X540)
+ reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+
IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
} else {
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h
index 148fd8b..2de71a5 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h
@@ -92,8 +92,10 @@
#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */
+#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer*/
#define IXGBE_TXPBTHRESH_DCB 0xA /* THRESH value for DCB mode */
+#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */
/* SECTXMINIFG DCB */
#define IXGBE_SECTX_DCB 0x00001F00 /* DCB TX Buffer IFG */
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 327c861..5e7ed22 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -347,18 +347,28 @@
static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct dcb_app app = {
+ .selector = DCB_APP_IDTYPE_ETHTYPE,
+ .protocol = ETH_P_FCOE,
+ };
+ u8 up = dcb_getapp(netdev, &app);
int ret;
- if (!adapter->dcb_set_bitmap ||
- !(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
- return DCB_NO_HW_CHG;
-
ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
MAX_TRAFFIC_CLASS);
-
if (ret)
return DCB_NO_HW_CHG;
+ /* In IEEE mode app data must be parsed into DCBX format for
+ * hardware routines.
+ */
+ if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)
+ up = (1 << up);
+
+#ifdef IXGBE_FCOE
+ if (up && (up != (1 << adapter->fcoe.up)))
+ adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
+
/*
* Only take down the adapter if an app change occurred. FCoE
* may shuffle tx rings in this case and this can not be done
@@ -366,12 +376,15 @@
*/
if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
+
+ ixgbe_fcoe_setapp(adapter, up);
if (netif_running(netdev))
netdev->netdev_ops->ndo_stop(netdev);
ixgbe_clear_interrupt_scheme(adapter);
}
+#endif
if (adapter->dcb_cfg.pfc_mode_enable) {
switch (adapter->hw.mac.type) {
@@ -399,12 +412,14 @@
}
}
+#ifdef IXGBE_FCOE
if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
ret = DCB_HW_CHG_RST;
}
+#endif
if (adapter->dcb_set_bitmap & BIT_PFC) {
u8 pfc_en;
@@ -558,68 +573,6 @@
return dcb_getapp(netdev, &app);
}
-/**
- * ixgbe_dcbnl_setapp - set the DCBX application user priority
- * @netdev : the corresponding netdev
- * @idtype : identifies the id as ether type or TCP/UDP port number
- * @id: id is either ether type or TCP/UDP port number
- * @up: the 802.1p user priority bitmap
- *
- * Returns : 0 on success or 1 on error
- */
-static u8 ixgbe_dcbnl_setapp(struct net_device *netdev,
- u8 idtype, u16 id, u8 up)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- u8 rval = 1;
- struct dcb_app app = {
- .selector = idtype,
- .protocol = id,
- .priority = up
- };
-
- if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
- return rval;
-
- rval = dcb_setapp(netdev, &app);
-
- switch (idtype) {
- case DCB_APP_IDTYPE_ETHTYPE:
-#ifdef IXGBE_FCOE
- if (id == ETH_P_FCOE) {
- u8 old_tc;
-
- /* Get current programmed tc */
- old_tc = adapter->fcoe.tc;
- rval = ixgbe_fcoe_setapp(adapter, up);
-
- if (rval ||
- !(adapter->flags & IXGBE_FLAG_DCB_ENABLED) ||
- !(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
- break;
-
- /* The FCoE application priority may be changed multiple
- * times in quick succession with switches that build up
- * TLVs. To avoid creating uneeded device resets this
- * checks the actual HW configuration and clears
- * BIT_APP_UPCHG if a HW configuration change is not
- * need
- */
- if (old_tc == adapter->fcoe.tc)
- adapter->dcb_set_bitmap &= ~BIT_APP_UPCHG;
- else
- adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
- }
-#endif
- break;
- case DCB_APP_IDTYPE_PORTNUM:
- break;
- default:
- break;
- }
- return rval;
-}
-
static int ixgbe_dcbnl_ieee_getets(struct net_device *dev,
struct ieee_ets *ets)
{
@@ -745,25 +698,14 @@
if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
return -EINVAL;
-#ifdef IXGBE_FCOE
- if (app->selector == 1 && app->protocol == ETH_P_FCOE) {
- if (adapter->fcoe.tc == app->priority)
- goto setapp;
- /* In IEEE mode map up to tc 1:1 */
- adapter->fcoe.tc = app->priority;
- adapter->fcoe.up = app->priority;
-
- /* Force hardware reset required to push FCoE
- * setup on {tx|rx}_rings
- */
- adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
- ixgbe_dcbnl_set_all(dev);
- }
-
-setapp:
-#endif
dcb_setapp(dev, app);
+
+#ifdef IXGBE_FCOE
+ if (app->selector == 1 && app->protocol == ETH_P_FCOE &&
+ adapter->fcoe.tc == app->priority)
+ ixgbe_dcbnl_set_all(dev);
+#endif
return 0;
}
@@ -838,7 +780,6 @@
.getpfcstate = ixgbe_dcbnl_getpfcstate,
.setpfcstate = ixgbe_dcbnl_setpfcstate,
.getapp = ixgbe_dcbnl_getapp,
- .setapp = ixgbe_dcbnl_setapp,
.getdcbx = ixgbe_dcbnl_getdcbx,
.setdcbx = ixgbe_dcbnl_setdcbx,
};
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 76380a2..cb1555b 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -84,6 +84,7 @@
{"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)},
{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
+ {"fdir_overflow", IXGBE_STAT(fdir_overflow)},
{"rx_fifo_errors", IXGBE_NETDEV_STAT(rx_fifo_errors)},
{"rx_missed_errors", IXGBE_NETDEV_STAT(rx_missed_errors)},
{"tx_aborted_errors", IXGBE_NETDEV_STAT(tx_aborted_errors)},
@@ -102,6 +103,10 @@
{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
{"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
+ {"os2bmc_rx_by_bmc", IXGBE_STAT(stats.o2bgptc)},
+ {"os2bmc_tx_by_bmc", IXGBE_STAT(stats.b2ospc)},
+ {"os2bmc_tx_by_host", IXGBE_STAT(stats.o2bspc)},
+ {"os2bmc_rx_by_host", IXGBE_STAT(stats.b2ogprc)},
#ifdef IXGBE_FCOE
{"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
{"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
@@ -288,20 +293,20 @@
if (link_up) {
switch (link_speed) {
case IXGBE_LINK_SPEED_10GB_FULL:
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
break;
case IXGBE_LINK_SPEED_1GB_FULL:
- ecmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
break;
case IXGBE_LINK_SPEED_100_FULL:
- ecmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
break;
default:
break;
}
ecmd->duplex = DUPLEX_FULL;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -346,9 +351,10 @@
}
} else {
/* in this case we currently only support 10Gb/FULL */
+ u32 speed = ethtool_cmd_speed(ecmd);
if ((ecmd->autoneg == AUTONEG_ENABLE) ||
(ecmd->advertising != ADVERTISED_10000baseT_Full) ||
- (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+ (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
return -EINVAL;
}
@@ -846,11 +852,8 @@
if (!eeprom_buff)
return -ENOMEM;
- for (i = 0; i < eeprom_len; i++) {
- if ((ret_val = hw->eeprom.ops.read(hw, first_word + i,
- &eeprom_buff[i])))
- break;
- }
+ ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len,
+ eeprom_buff);
/* Device's eeprom is always little-endian, word addressable */
for (i = 0; i < eeprom_len; i++)
@@ -931,7 +934,7 @@
}
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (!netif_running(adapter->netdev)) {
for (i = 0; i < adapter->num_tx_queues; i++)
@@ -1030,9 +1033,6 @@
return IXGBE_TEST_LEN;
case ETH_SS_STATS:
return IXGBE_STATS_LEN;
- case ETH_SS_NTUPLE_FILTERS:
- return ETHTOOL_MAX_NTUPLE_LIST_ENTRY *
- ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY;
default:
return -EOPNOTSUPP;
}
@@ -1238,46 +1238,62 @@
{ 0, 0, 0, 0 }
};
-static const u32 register_test_patterns[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
-};
+static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ u32 pat, val, before;
+ static const u32 test_pattern[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
-#define REG_PATTERN_TEST(R, M, W) \
-{ \
- u32 pat, val, before; \
- for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
- before = readl(adapter->hw.hw_addr + R); \
- writel((register_test_patterns[pat] & W), \
- (adapter->hw.hw_addr + R)); \
- val = readl(adapter->hw.hw_addr + R); \
- if (val != (register_test_patterns[pat] & W & M)) { \
- e_err(drv, "pattern test reg %04X failed: got " \
- "0x%08X expected 0x%08X\n", \
- R, val, (register_test_patterns[pat] & W & M)); \
- *data = R; \
- writel(before, adapter->hw.hw_addr + R); \
- return 1; \
- } \
- writel(before, adapter->hw.hw_addr + R); \
- } \
+ for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
+ before = readl(adapter->hw.hw_addr + reg);
+ writel((test_pattern[pat] & write),
+ (adapter->hw.hw_addr + reg));
+ val = readl(adapter->hw.hw_addr + reg);
+ if (val != (test_pattern[pat] & write & mask)) {
+ e_err(drv, "pattern test reg %04X failed: got "
+ "0x%08X expected 0x%08X\n",
+ reg, val, (test_pattern[pat] & write & mask));
+ *data = reg;
+ writel(before, adapter->hw.hw_addr + reg);
+ return 1;
+ }
+ writel(before, adapter->hw.hw_addr + reg);
+ }
+ return 0;
}
-#define REG_SET_AND_CHECK(R, M, W) \
-{ \
- u32 val, before; \
- before = readl(adapter->hw.hw_addr + R); \
- writel((W & M), (adapter->hw.hw_addr + R)); \
- val = readl(adapter->hw.hw_addr + R); \
- if ((W & M) != (val & M)) { \
- e_err(drv, "set/check reg %04X test failed: got 0x%08X " \
- "expected 0x%08X\n", R, (val & M), (W & M)); \
- *data = R; \
- writel(before, (adapter->hw.hw_addr + R)); \
- return 1; \
- } \
- writel(before, (adapter->hw.hw_addr + R)); \
+static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ u32 val, before;
+ before = readl(adapter->hw.hw_addr + reg);
+ writel((write & mask), (adapter->hw.hw_addr + reg));
+ val = readl(adapter->hw.hw_addr + reg);
+ if ((write & mask) != (val & mask)) {
+ e_err(drv, "set/check reg %04X test failed: got 0x%08X "
+ "expected 0x%08X\n", reg, (val & mask), (write & mask));
+ *data = reg;
+ writel(before, (adapter->hw.hw_addr + reg));
+ return 1;
+ }
+ writel(before, (adapter->hw.hw_addr + reg));
+ return 0;
}
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0) \
+
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0) \
+
static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
{
const struct ixgbe_reg_test *test;
@@ -1328,13 +1344,13 @@
switch (test->test_type) {
case PATTERN_TEST:
REG_PATTERN_TEST(test->reg + (i * 0x40),
- test->mask,
- test->write);
+ test->mask,
+ test->write);
break;
case SET_READ_TEST:
REG_SET_AND_CHECK(test->reg + (i * 0x40),
- test->mask,
- test->write);
+ test->mask,
+ test->write);
break;
case WRITE_NO_TEST:
writel(test->write,
@@ -1343,18 +1359,18 @@
break;
case TABLE32_TEST:
REG_PATTERN_TEST(test->reg + (i * 4),
- test->mask,
- test->write);
+ test->mask,
+ test->write);
break;
case TABLE64_TEST_LO:
REG_PATTERN_TEST(test->reg + (i * 8),
- test->mask,
- test->write);
+ test->mask,
+ test->write);
break;
case TABLE64_TEST_HI:
REG_PATTERN_TEST((test->reg + 4) + (i * 8),
- test->mask,
- test->write);
+ test->mask,
+ test->write);
break;
}
}
@@ -1417,7 +1433,7 @@
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
- msleep(10);
+ usleep_range(10000, 20000);
/* Test each interrupt */
for (; i < 10; i++) {
@@ -1437,7 +1453,7 @@
~mask & 0x00007FFF);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
~mask & 0x00007FFF);
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->test_icr & mask) {
*data = 3;
@@ -1454,7 +1470,7 @@
adapter->test_icr = 0;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
- msleep(10);
+ usleep_range(10000, 20000);
if (!(adapter->test_icr &mask)) {
*data = 4;
@@ -1474,7 +1490,7 @@
~mask & 0x00007FFF);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
~mask & 0x00007FFF);
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->test_icr) {
*data = 5;
@@ -1485,7 +1501,7 @@
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
- msleep(10);
+ usleep_range(10000, 20000);
/* Unhook test interrupt handler */
free_irq(irq, netdev);
@@ -1598,6 +1614,13 @@
struct ixgbe_hw *hw = &adapter->hw;
u32 reg_data;
+ /* X540 needs to set the MACC.FLU bit to force link up */
+ if (adapter->hw.mac.type == ixgbe_mac_X540) {
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MACC);
+ reg_data |= IXGBE_MACC_FLU;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_MACC, reg_data);
+ }
+
/* right now we only support MAC loopback in the driver */
reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
/* Setup MAC loopback */
@@ -1613,7 +1636,7 @@
reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_AUTOC, reg_data);
IXGBE_WRITE_FLUSH(&adapter->hw);
- msleep(10);
+ usleep_range(10000, 20000);
/* Disable Atlas Tx lanes; re-enabled in reset path */
if (hw->mac.type == ixgbe_mac_82598EB) {
@@ -1999,25 +2022,30 @@
return 0;
}
-static int ixgbe_phys_id(struct net_device *netdev, u32 data)
+static int ixgbe_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
- u32 i;
- if (!data || data > 300)
- data = 300;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ return 2;
- for (i = 0; i < (data * 1000); i += 400) {
+ case ETHTOOL_ID_ON:
hw->mac.ops.led_on(hw, IXGBE_LED_ON);
- msleep_interruptible(200);
- hw->mac.ops.led_off(hw, IXGBE_LED_ON);
- msleep_interruptible(200);
- }
+ break;
- /* Restore LED settings */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, led_reg);
+ case ETHTOOL_ID_OFF:
+ hw->mac.ops.led_off(hw, IXGBE_LED_ON);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ /* Restore LED settings */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg);
+ break;
+ }
return 0;
}
@@ -2230,8 +2258,13 @@
need_reset = (data & ETH_FLAG_RXVLAN) !=
(netdev->features & NETIF_F_HW_VLAN_RX);
+ if ((data & ETH_FLAG_RXHASH) &&
+ !(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+ return -EOPNOTSUPP;
+
rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_LRO | ETH_FLAG_NTUPLE |
- ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
+ ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN |
+ ETH_FLAG_RXHASH);
if (rc)
return rc;
@@ -2465,7 +2498,7 @@
.set_tso = ixgbe_set_tso,
.self_test = ixgbe_diag_test,
.get_strings = ixgbe_get_strings,
- .phys_id = ixgbe_phys_id,
+ .set_phys_id = ixgbe_set_phys_id,
.get_sset_count = ixgbe_get_sset_count,
.get_ethtool_stats = ixgbe_get_ethtool_stats,
.get_coalesce = ixgbe_get_coalesce,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index dba7d77..0592072 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -416,8 +416,7 @@
if (!ddp->udl)
goto ddp_out;
- ddp->err = (fcerr | fceofe);
- if (ddp->err)
+ if (fcerr | fceofe)
goto ddp_out;
fcstat = (sterr & IXGBE_RXDADV_STAT_FCSTAT);
@@ -428,6 +427,7 @@
if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
pci_unmap_sg(adapter->pdev, ddp->sgl,
ddp->sgc, DMA_FROM_DEVICE);
+ ddp->err = (fcerr | fceofe);
ddp->sgl = NULL;
ddp->sgc = 0;
}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 6f8adc7..fa01b0b 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -51,8 +51,12 @@
char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-
-#define DRV_VERSION "3.2.9-k2"
+#define MAJ 3
+#define MIN 3
+#define BUILD 8
+#define KFIX 2
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+ __stringify(BUILD) "-k" __stringify(KFIX)
const char ixgbe_driver_version[] = DRV_VERSION;
static const char ixgbe_copyright[] =
"Copyright (c) 1999-2011 Intel Corporation.";
@@ -120,6 +124,10 @@
board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T),
board_X540 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS),
+ board_82599 },
/* required last entry */
{0, }
@@ -185,6 +193,22 @@
adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
}
+static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
+{
+ if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
+ !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state))
+ schedule_work(&adapter->service_task);
+}
+
+static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
+{
+ BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
+
+ /* flush memory to make sure state is correct before next watchog */
+ smp_mb__before_clear_bit();
+ clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
+}
+
struct ixgbe_reg_info {
u32 ofs;
char *name;
@@ -811,7 +835,19 @@
#define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \
MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */
-static void ixgbe_tx_timeout(struct net_device *netdev);
+/**
+ * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout
+ * @adapter: driver private struct
+ **/
+static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
+{
+
+ /* Do the reset outside of interrupt context */
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+ ixgbe_service_event_schedule(adapter);
+ }
+}
/**
* ixgbe_clean_tx_irq - Reclaim resources after transmit completes
@@ -893,7 +929,7 @@
adapter->tx_timeout_count + 1, tx_ring->queue_index);
/* schedule immediate reset if we believe we hung */
- ixgbe_tx_timeout(adapter->netdev);
+ ixgbe_tx_timeout_reset(adapter);
/* the adapter is about to reset, no point in enabling stuff */
return true;
@@ -943,8 +979,6 @@
rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
- rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
- IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
}
@@ -962,7 +996,6 @@
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl);
break;
case ixgbe_mac_82599EB:
@@ -972,7 +1005,6 @@
txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl);
break;
default:
@@ -1061,8 +1093,14 @@
return 0;
}
-
#endif /* CONFIG_IXGBE_DCA */
+
+static inline void ixgbe_rx_hash(union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+}
+
/**
* ixgbe_receive_skb - Send a completed packet up the stack
* @adapter: board private structure
@@ -1454,6 +1492,8 @@
}
ixgbe_rx_checksum(adapter, rx_desc, skb);
+ if (adapter->netdev->features & NETIF_F_RXHASH)
+ ixgbe_rx_hash(rx_desc, skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
@@ -1787,35 +1827,51 @@
}
/**
- * ixgbe_check_overtemp_task - worker thread to check over tempurature
- * @work: pointer to work_struct containing our data
+ * ixgbe_check_overtemp_subtask - check for over tempurature
+ * @adapter: pointer to adapter
**/
-static void ixgbe_check_overtemp_task(struct work_struct *work)
+static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- check_overtemp_task);
struct ixgbe_hw *hw = &adapter->hw;
u32 eicr = adapter->interrupt_event;
- if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE))
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
return;
+ if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+ !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+
switch (hw->device_id) {
- case IXGBE_DEV_ID_82599_T3_LOM: {
- u32 autoneg;
- bool link_up = false;
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ /*
+ * Since the warning interrupt is for both ports
+ * we don't have to check if:
+ * - This interrupt wasn't for our port.
+ * - We may have missed the interrupt so always have to
+ * check if we got a LSC
+ */
+ if (!(eicr & IXGBE_EICR_GPI_SDP0) &&
+ !(eicr & IXGBE_EICR_LSC))
+ return;
- if (hw->mac.ops.check_link)
+ if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) {
+ u32 autoneg;
+ bool link_up = false;
+
hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
- if (((eicr & IXGBE_EICR_GPI_SDP0) && (!link_up)) ||
- (eicr & IXGBE_EICR_LSC))
- /* Check if this is due to overtemp */
- if (hw->phy.ops.check_overtemp(hw) == IXGBE_ERR_OVERTEMP)
- break;
- return;
- }
+ if (link_up)
+ return;
+ }
+
+ /* Check if this is not due to overtemp */
+ if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP)
+ return;
+
+ break;
default:
if (!(eicr & IXGBE_EICR_GPI_SDP0))
return;
@@ -1825,8 +1881,8 @@
"Network adapter has been stopped because it has over heated. "
"Restart the computer. If the problem persists, "
"power off the system and replace the adapter\n");
- /* write to clear the interrupt */
- IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
+
+ adapter->interrupt_event = 0;
}
static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
@@ -1848,15 +1904,19 @@
if (eicr & IXGBE_EICR_GPI_SDP2) {
/* Clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- schedule_work(&adapter->sfp_config_module_task);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+ ixgbe_service_event_schedule(adapter);
+ }
}
if (eicr & IXGBE_EICR_GPI_SDP1) {
/* Clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- schedule_work(&adapter->multispeed_fiber_task);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+ ixgbe_service_event_schedule(adapter);
+ }
}
}
@@ -1870,7 +1930,7 @@
if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
IXGBE_WRITE_FLUSH(hw);
- schedule_work(&adapter->watchdog_task);
+ ixgbe_service_event_schedule(adapter);
}
}
@@ -1898,26 +1958,32 @@
switch (hw->mac.type) {
case ixgbe_mac_82599EB:
- ixgbe_check_sfp_event(adapter, eicr);
- if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
- ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
- adapter->interrupt_event = eicr;
- schedule_work(&adapter->check_overtemp_task);
- }
- /* now fallthrough to handle Flow Director */
case ixgbe_mac_X540:
/* Handle Flow Director Full threshold interrupt */
if (eicr & IXGBE_EICR_FLOW_DIR) {
+ int reinit_count = 0;
int i;
- IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_FLOW_DIR);
- /* Disable transmits before FDIR Re-initialization */
- netif_tx_stop_all_queues(netdev);
for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbe_ring *tx_ring =
- adapter->tx_ring[i];
+ struct ixgbe_ring *ring = adapter->tx_ring[i];
if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE,
- &tx_ring->state))
- schedule_work(&adapter->fdir_reinit_task);
+ &ring->state))
+ reinit_count++;
+ }
+ if (reinit_count) {
+ /* no more flow director interrupts until after init */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR);
+ eicr &= ~IXGBE_EICR_FLOW_DIR;
+ adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+ ixgbe_service_event_schedule(adapter);
+ }
+ }
+ ixgbe_check_sfp_event(adapter, eicr);
+ if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+ ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->interrupt_event = eicr;
+ adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+ ixgbe_service_event_schedule(adapter);
}
}
break;
@@ -1927,8 +1993,10 @@
ixgbe_check_fan_failure(adapter, eicr);
+ /* re-enable the original interrupt state, no lsc, no queues */
if (!test_bit(__IXGBE_DOWN, &adapter->state))
- IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, eicr &
+ ~(IXGBE_EIMS_LSC | IXGBE_EIMS_RTX_QUEUE));
return IRQ_HANDLED;
}
@@ -2513,8 +2581,11 @@
ixgbe_check_sfp_event(adapter, eicr);
if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
- adapter->interrupt_event = eicr;
- schedule_work(&adapter->check_overtemp_task);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->interrupt_event = eicr;
+ adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+ ixgbe_service_event_schedule(adapter);
+ }
}
break;
default:
@@ -2731,7 +2802,7 @@
/* poll to verify queue is enabled */
do {
- msleep(1);
+ usleep_range(1000, 2000);
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
} while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE));
if (!wait_loop)
@@ -3023,7 +3094,7 @@
return;
do {
- msleep(1);
+ usleep_range(1000, 2000);
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
} while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE));
@@ -3178,7 +3249,9 @@
/* enable Tx loopback for VF/PF communication */
IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
/* Enable MAC Anti-Spoofing */
- hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0),
+ hw->mac.ops.set_mac_anti_spoofing(hw,
+ (adapter->antispoofing_enabled =
+ (adapter->num_vfs != 0)),
adapter->num_vfs);
}
@@ -3487,7 +3560,7 @@
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
unsigned int vfn = adapter->num_vfs;
- unsigned int rar_entries = hw->mac.num_rar_entries - (vfn + 1);
+ unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS;
int count = 0;
/* return ENOMEM indicating insufficient memory for addresses */
@@ -3760,31 +3833,16 @@
**/
static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
{
- struct ixgbe_hw *hw = &adapter->hw;
+ /*
+ * We are assuming the worst case scenerio here, and that
+ * is that an SFP was inserted/removed after the reset
+ * but before SFP detection was enabled. As such the best
+ * solution is to just start searching as soon as we start
+ */
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+ adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
- if (hw->phy.multispeed_fiber) {
- /*
- * In multispeed fiber setups, the device may not have
- * had a physical connection when the driver loaded.
- * If that's the case, the initial link configuration
- * couldn't get the MAC into 10G or 1G mode, so we'll
- * never have a link status change interrupt fire.
- * We need to try and force an autonegotiation
- * session, then bring up link.
- */
- if (hw->mac.ops.setup_sfp)
- hw->mac.ops.setup_sfp(hw);
- if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
- schedule_work(&adapter->multispeed_fiber_task);
- } else {
- /*
- * Direct Attach Cu and non-multispeed fiber modules
- * still need to be configured properly prior to
- * attempting link.
- */
- if (!(adapter->flags & IXGBE_FLAG_IN_SFP_MOD_TASK))
- schedule_work(&adapter->sfp_config_module_task);
- }
+ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
}
/**
@@ -3860,9 +3918,10 @@
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
gpie |= IXGBE_SDP1_GPIEN;
- if (hw->mac.type == ixgbe_mac_82599EB)
+ if (hw->mac.type == ixgbe_mac_82599EB) {
gpie |= IXGBE_SDP1_GPIEN;
gpie |= IXGBE_SDP2_GPIEN;
+ }
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
}
@@ -3913,17 +3972,6 @@
e_crit(drv, "Fan has stopped, replace the adapter\n");
}
- /*
- * For hot-pluggable SFP+ devices, a new SFP+ module may have
- * arrived before interrupts were enabled but after probe. Such
- * devices wouldn't have their type identified yet. We need to
- * kick off the SFP+ module setup first, then try to bring up link.
- * If we're not hot-pluggable SFP+, we just need to configure link
- * and bring it up.
- */
- if (hw->phy.type == ixgbe_phy_none)
- schedule_work(&adapter->sfp_config_module_task);
-
/* enable transmits */
netif_tx_start_all_queues(adapter->netdev);
@@ -3931,7 +3979,7 @@
* link up interrupt but shouldn't be a problem */
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
adapter->link_check_timeout = jiffies;
- mod_timer(&adapter->watchdog_timer, jiffies);
+ mod_timer(&adapter->service_timer, jiffies);
/* Set PF Reset Done bit so PF/VF Mail Ops can work */
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
@@ -3944,8 +3992,11 @@
void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
{
WARN_ON(in_interrupt());
+ /* put off any impending NetWatchDogTimeout */
+ adapter->netdev->trans_start = jiffies;
+
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
ixgbe_down(adapter);
/*
* If SR-IOV enabled then wait a bit before bringing the adapter
@@ -3972,10 +4023,20 @@
struct ixgbe_hw *hw = &adapter->hw;
int err;
+ /* lock SFP init bit to prevent race conditions with the watchdog */
+ while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ usleep_range(1000, 2000);
+
+ /* clear all SFP and link config related flags while holding SFP_INIT */
+ adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP |
+ IXGBE_FLAG2_SFP_NEEDS_RESET);
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
err = hw->mac.ops.init_hw(hw);
switch (err) {
case 0:
case IXGBE_ERR_SFP_NOT_PRESENT:
+ case IXGBE_ERR_SFP_NOT_SUPPORTED:
break;
case IXGBE_ERR_MASTER_REQUESTS_PENDING:
e_dev_err("master disable timed out\n");
@@ -3993,6 +4054,8 @@
e_dev_err("Hardware Error: %d\n", err);
}
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
/* reprogram the RAR[0] in case user changed it. */
hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
IXGBE_RAH_AV);
@@ -4121,13 +4184,39 @@
struct net_device *netdev = adapter->netdev;
struct ixgbe_hw *hw = &adapter->hw;
u32 rxctrl;
- u32 txdctl;
int i;
int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
/* signal that we are down to the interrupt handler */
set_bit(__IXGBE_DOWN, &adapter->state);
+ /* disable receives */
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
+
+ /* disable all enabled rx queues */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ /* this call also flushes the previous write */
+ ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
+
+ usleep_range(10000, 20000);
+
+ netif_tx_stop_all_queues(netdev);
+
+ /* call carrier off first to avoid false dev_watchdog timeouts */
+ netif_carrier_off(netdev);
+ netif_tx_disable(netdev);
+
+ ixgbe_irq_disable(adapter);
+
+ ixgbe_napi_disable_all(adapter);
+
+ adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT |
+ IXGBE_FLAG2_RESET_REQUESTED);
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+
+ del_timer_sync(&adapter->service_timer);
+
/* disable receive for all VFs and wait one second */
if (adapter->num_vfs) {
/* ping all the active vfs to let them know we are going down */
@@ -4141,31 +4230,6 @@
adapter->vfinfo[i].clear_to_send = 0;
}
- /* disable receives */
- rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
-
- /* disable all enabled rx queues */
- for (i = 0; i < adapter->num_rx_queues; i++)
- /* this call also flushes the previous write */
- ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
-
- msleep(10);
-
- netif_tx_stop_all_queues(netdev);
-
- clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
- del_timer_sync(&adapter->sfp_timer);
- del_timer_sync(&adapter->watchdog_timer);
- cancel_work_sync(&adapter->watchdog_task);
-
- netif_carrier_off(netdev);
- netif_tx_disable(netdev);
-
- ixgbe_irq_disable(adapter);
-
- ixgbe_napi_disable_all(adapter);
-
/* Cleanup the affinity_hint CPU mask memory and callback */
for (i = 0; i < num_q_vectors; i++) {
struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
@@ -4175,21 +4239,13 @@
free_cpumask_var(q_vector->affinity_mask);
}
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
- adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
- cancel_work_sync(&adapter->fdir_reinit_task);
-
- if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
- cancel_work_sync(&adapter->check_overtemp_task);
-
/* disable transmits in the hardware now that interrupts are off */
for (i = 0; i < adapter->num_tx_queues; i++) {
u8 reg_idx = adapter->tx_ring[i]->reg_idx;
- txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
- IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx),
- (txdctl & ~IXGBE_TXDCTL_ENABLE));
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH);
}
- /* Disable the Tx DMA engine on 82599 */
+
+ /* Disable the Tx DMA engine on 82599 and X540 */
switch (hw->mac.type) {
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
@@ -4201,9 +4257,6 @@
break;
}
- /* clear n-tuple filters that are cached */
- ethtool_ntuple_flush(netdev);
-
if (!pci_channel_offline(adapter->pdev))
ixgbe_reset(adapter);
@@ -4267,25 +4320,8 @@
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- adapter->tx_timeout_count++;
-
/* Do the reset outside of interrupt context */
- schedule_work(&adapter->reset_task);
-}
-
-static void ixgbe_reset_task(struct work_struct *work)
-{
- struct ixgbe_adapter *adapter;
- adapter = container_of(work, struct ixgbe_adapter, reset_task);
-
- /* If we're already down or resetting, just bail */
- if (test_bit(__IXGBE_DOWN, &adapter->state) ||
- test_bit(__IXGBE_RESETTING, &adapter->state))
- return;
-
- ixgbe_dump(adapter);
- netdev_err(adapter->netdev, "Reset adapter\n");
- ixgbe_reinit_locked(adapter);
+ ixgbe_tx_timeout_reset(adapter);
}
/**
@@ -4567,8 +4603,8 @@
#ifdef CONFIG_IXGBE_DCB
/* ixgbe_get_first_reg_idx - Return first register index associated with ring */
-void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
- unsigned int *tx, unsigned int *rx)
+static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
+ unsigned int *tx, unsigned int *rx)
{
struct net_device *dev = adapter->netdev;
struct ixgbe_hw *hw = &adapter->hw;
@@ -5100,11 +5136,6 @@
return err;
}
-static void ring_free_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct ixgbe_ring, rcu));
-}
-
/**
* ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
* @adapter: board private structure to clear interrupt scheme on
@@ -5126,7 +5157,7 @@
/* ixgbe_get_stats64() might access this ring, we must wait
* a grace period before freeing it.
*/
- call_rcu(&ring->rcu, ring_free_rcu);
+ kfree_rcu(ring, rcu);
adapter->rx_ring[i] = NULL;
}
@@ -5138,57 +5169,6 @@
}
/**
- * ixgbe_sfp_timer - worker thread to find a missing module
- * @data: pointer to our adapter struct
- **/
-static void ixgbe_sfp_timer(unsigned long data)
-{
- struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
-
- /*
- * Do the sfp_timer outside of interrupt context due to the
- * delays that sfp+ detection requires
- */
- schedule_work(&adapter->sfp_task);
-}
-
-/**
- * ixgbe_sfp_task - worker thread to find a missing module
- * @work: pointer to work_struct containing our data
- **/
-static void ixgbe_sfp_task(struct work_struct *work)
-{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- sfp_task);
- struct ixgbe_hw *hw = &adapter->hw;
-
- if ((hw->phy.type == ixgbe_phy_nl) &&
- (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
- s32 ret = hw->phy.ops.identify_sfp(hw);
- if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
- goto reschedule;
- ret = hw->phy.ops.reset(hw);
- if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- e_dev_err("failed to initialize because an unsupported "
- "SFP+ module type was detected.\n");
- e_dev_err("Reload the driver after installing a "
- "supported module.\n");
- unregister_netdev(adapter->netdev);
- } else {
- e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
- }
- /* don't need this routine any more */
- clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
- }
- return;
-reschedule:
- if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state))
- mod_timer(&adapter->sfp_timer,
- round_jiffies(jiffies + (2 * HZ)));
-}
-
-/**
* ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
* @adapter: board private structure to initialize
*
@@ -5904,8 +5884,13 @@
hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
break;
- case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
+ /* OS2BMC stats are X540 only*/
+ hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC);
+ hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC);
+ hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC);
+ hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC);
+ case ixgbe_mac_82599EB:
hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
@@ -5979,23 +5964,66 @@
}
/**
- * ixgbe_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
+ * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table
+ * @adapter - pointer to the device adapter structure
**/
-static void ixgbe_watchdog(unsigned long data)
+static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
{
- struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i;
+
+ if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
+ /* do nothing if we are not using signature filters */
+ if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE))
+ return;
+
+ adapter->fdir_overflow++;
+
+ if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ set_bit(__IXGBE_TX_FDIR_INIT_DONE,
+ &(adapter->tx_ring[i]->state));
+ /* re-enable flow director interrupts */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR);
+ } else {
+ e_err(probe, "failed to finish FDIR re-initialization, "
+ "ignored adding FDIR ATR filters\n");
+ }
+}
+
+/**
+ * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts
+ * @adapter - pointer to the device adapter structure
+ *
+ * This function serves two purposes. First it strobes the interrupt lines
+ * in order to make certain interrupts are occuring. Secondly it sets the
+ * bits needed to check for TX hangs. As a result we should immediately
+ * determine if a hang has occured.
+ */
+static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
+{
struct ixgbe_hw *hw = &adapter->hw;
u64 eics = 0;
int i;
- /*
- * Do the watchdog outside of interrupt context due to the lovely
- * delays that some of the newer hardware requires
- */
+ /* If we're down or resetting, just bail */
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
- if (test_bit(__IXGBE_DOWN, &adapter->state))
- goto watchdog_short_circuit;
+ /* Force detection of hung controller */
+ if (netif_carrier_ok(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ set_check_for_tx_hang(adapter->tx_ring[i]);
+ }
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
/*
@@ -6005,108 +6033,172 @@
*/
IXGBE_WRITE_REG(hw, IXGBE_EICS,
(IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
- goto watchdog_reschedule;
+ } else {
+ /* get one bit for every active tx/rx interrupt vector */
+ for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+ struct ixgbe_q_vector *qv = adapter->q_vector[i];
+ if (qv->rxr_count || qv->txr_count)
+ eics |= ((u64)1 << i);
+ }
}
- /* get one bit for every active tx/rx interrupt vector */
- for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
- struct ixgbe_q_vector *qv = adapter->q_vector[i];
- if (qv->rxr_count || qv->txr_count)
- eics |= ((u64)1 << i);
- }
-
- /* Cause software interrupt to ensure rx rings are cleaned */
+ /* Cause software interrupt to ensure rings are cleaned */
ixgbe_irq_rearm_queues(adapter, eics);
-watchdog_reschedule:
- /* Reset the timer */
- mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
-
-watchdog_short_circuit:
- schedule_work(&adapter->watchdog_task);
}
/**
- * ixgbe_multispeed_fiber_task - worker thread to configure multispeed fiber
- * @work: pointer to work_struct containing our data
+ * ixgbe_watchdog_update_link - update the link status
+ * @adapter - pointer to the device adapter structure
+ * @link_speed - pointer to a u32 to store the link_speed
**/
-static void ixgbe_multispeed_fiber_task(struct work_struct *work)
+static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- multispeed_fiber_task);
struct ixgbe_hw *hw = &adapter->hw;
- u32 autoneg;
- bool negotiation;
-
- adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
- autoneg = hw->phy.autoneg_advertised;
- if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
- hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
- hw->mac.autotry_restart = false;
- if (hw->mac.ops.setup_link)
- hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
- adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
- adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK;
-}
-
-/**
- * ixgbe_sfp_config_module_task - worker thread to configure a new SFP+ module
- * @work: pointer to work_struct containing our data
- **/
-static void ixgbe_sfp_config_module_task(struct work_struct *work)
-{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- sfp_config_module_task);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 err;
-
- adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
-
- /* Time for electrical oscillations to settle down */
- msleep(100);
- err = hw->phy.ops.identify_sfp(hw);
-
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- e_dev_err("failed to initialize because an unsupported SFP+ "
- "module type was detected.\n");
- e_dev_err("Reload the driver after installing a supported "
- "module.\n");
- unregister_netdev(adapter->netdev);
- return;
- }
- if (hw->mac.ops.setup_sfp)
- hw->mac.ops.setup_sfp(hw);
-
- if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
- /* This will also work for DA Twinax connections */
- schedule_work(&adapter->multispeed_fiber_task);
- adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK;
-}
-
-/**
- * ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table
- * @work: pointer to work_struct containing our data
- **/
-static void ixgbe_fdir_reinit_task(struct work_struct *work)
-{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- fdir_reinit_task);
- struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = adapter->link_speed;
+ bool link_up = adapter->link_up;
int i;
- if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- set_bit(__IXGBE_TX_FDIR_INIT_DONE,
- &(adapter->tx_ring[i]->state));
+ if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE))
+ return;
+
+ if (hw->mac.ops.check_link) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
} else {
- e_err(probe, "failed to finish FDIR re-initialization, "
- "ignored adding FDIR ATR filters\n");
+ /* always assume link is up, if no check link function */
+ link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ link_up = true;
}
- /* Done FDIR Re-initialization, enable transmits */
- netif_tx_start_all_queues(adapter->netdev);
+ if (link_up) {
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ hw->mac.ops.fc_enable(hw, i);
+ } else {
+ hw->mac.ops.fc_enable(hw, 0);
+ }
+ }
+
+ if (link_up ||
+ time_after(jiffies, (adapter->link_check_timeout +
+ IXGBE_TRY_LINK_TIMEOUT))) {
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ adapter->link_up = link_up;
+ adapter->link_speed = link_speed;
+}
+
+/**
+ * ixgbe_watchdog_link_is_up - update netif_carrier status and
+ * print link up message
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = adapter->link_speed;
+ bool flow_rx, flow_tx;
+
+ /* only continue if link was previously down */
+ if (netif_carrier_ok(netdev))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB: {
+ u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
+ flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
+ }
+ break;
+ case ixgbe_mac_X540:
+ case ixgbe_mac_82599EB: {
+ u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+ flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
+ flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
+ }
+ break;
+ default:
+ flow_tx = false;
+ flow_rx = false;
+ break;
+ }
+ e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
+ (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
+ "10 Gbps" :
+ (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ "1 Gbps" :
+ (link_speed == IXGBE_LINK_SPEED_100_FULL ?
+ "100 Mbps" :
+ "unknown speed"))),
+ ((flow_rx && flow_tx) ? "RX/TX" :
+ (flow_rx ? "RX" :
+ (flow_tx ? "TX" : "None"))));
+
+ netif_carrier_on(netdev);
+#ifdef HAVE_IPLINK_VF_CONFIG
+ ixgbe_check_vf_rate_limit(adapter);
+#endif /* HAVE_IPLINK_VF_CONFIG */
+}
+
+/**
+ * ixgbe_watchdog_link_is_down - update netif_carrier status and
+ * print link down message
+ * @adapter - pointer to the adapter structure
+ **/
+static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ adapter->link_up = false;
+ adapter->link_speed = 0;
+
+ /* only continue if link was up previously */
+ if (!netif_carrier_ok(netdev))
+ return;
+
+ /* poll for SFP+ cable when link is down */
+ if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB)
+ adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+ e_info(drv, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+}
+
+/**
+ * ixgbe_watchdog_flush_tx - flush queues on link down
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
+{
+ int i;
+ int some_tx_pending = 0;
+
+ if (!netif_carrier_ok(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+ if (tx_ring->next_to_use != tx_ring->next_to_clean) {
+ some_tx_pending = 1;
+ break;
+ }
+ }
+
+ if (some_tx_pending) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+ }
+ }
}
static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
@@ -6129,133 +6221,186 @@
e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
}
-static DEFINE_MUTEX(ixgbe_watchdog_lock);
-
/**
- * ixgbe_watchdog_task - worker thread to bring link up
- * @work: pointer to work_struct containing our data
+ * ixgbe_watchdog_subtask - check and bring link up
+ * @adapter - pointer to the device adapter structure
**/
-static void ixgbe_watchdog_task(struct work_struct *work)
+static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- watchdog_task);
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 link_speed;
- bool link_up;
- int i;
- struct ixgbe_ring *tx_ring;
- int some_tx_pending = 0;
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
- mutex_lock(&ixgbe_watchdog_lock);
+ ixgbe_watchdog_update_link(adapter);
- link_up = adapter->link_up;
- link_speed = adapter->link_speed;
-
- if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
- hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
- if (link_up) {
-#ifdef CONFIG_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- hw->mac.ops.fc_enable(hw, i);
- } else {
- hw->mac.ops.fc_enable(hw, 0);
- }
-#else
- hw->mac.ops.fc_enable(hw, 0);
-#endif
- }
-
- if (link_up ||
- time_after(jiffies, (adapter->link_check_timeout +
- IXGBE_TRY_LINK_TIMEOUT))) {
- adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
- IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
- }
- adapter->link_up = link_up;
- adapter->link_speed = link_speed;
- }
-
- if (link_up) {
- if (!netif_carrier_ok(netdev)) {
- bool flow_rx, flow_tx;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB: {
- u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
- flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
- flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
- }
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540: {
- u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
- u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
- flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
- flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
- }
- break;
- default:
- flow_tx = false;
- flow_rx = false;
- break;
- }
-
- e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
- (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
- "10 Gbps" :
- (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
- "1 Gbps" :
- (link_speed == IXGBE_LINK_SPEED_100_FULL ?
- "100 Mbps" :
- "unknown speed"))),
- ((flow_rx && flow_tx) ? "RX/TX" :
- (flow_rx ? "RX" :
- (flow_tx ? "TX" : "None"))));
-
- netif_carrier_on(netdev);
- ixgbe_check_vf_rate_limit(adapter);
- } else {
- /* Force detection of hung controller */
- for (i = 0; i < adapter->num_tx_queues; i++) {
- tx_ring = adapter->tx_ring[i];
- set_check_for_tx_hang(tx_ring);
- }
- }
- } else {
- adapter->link_up = false;
- adapter->link_speed = 0;
- if (netif_carrier_ok(netdev)) {
- e_info(drv, "NIC Link is Down\n");
- netif_carrier_off(netdev);
- }
- }
-
- if (!netif_carrier_ok(netdev)) {
- for (i = 0; i < adapter->num_tx_queues; i++) {
- tx_ring = adapter->tx_ring[i];
- if (tx_ring->next_to_use != tx_ring->next_to_clean) {
- some_tx_pending = 1;
- break;
- }
- }
-
- if (some_tx_pending) {
- /* We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context).
- */
- schedule_work(&adapter->reset_task);
- }
- }
+ if (adapter->link_up)
+ ixgbe_watchdog_link_is_up(adapter);
+ else
+ ixgbe_watchdog_link_is_down(adapter);
ixgbe_spoof_check(adapter);
ixgbe_update_stats(adapter);
- mutex_unlock(&ixgbe_watchdog_lock);
+
+ ixgbe_watchdog_flush_tx(adapter);
+}
+
+/**
+ * ixgbe_sfp_detection_subtask - poll for SFP+ cable
+ * @adapter - the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ s32 err;
+
+ /* not searching for SFP so there is nothing to do here */
+ if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) &&
+ !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+ return;
+
+ /* someone else is in init, wait until next service event */
+ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ return;
+
+ err = hw->phy.ops.identify_sfp(hw);
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto sfp_out;
+
+ if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+ /* If no cable is present, then we need to reset
+ * the next time we find a good cable. */
+ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+ }
+
+ /* exit on error */
+ if (err)
+ goto sfp_out;
+
+ /* exit if reset not needed */
+ if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+ goto sfp_out;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET;
+
+ /*
+ * A module may be identified correctly, but the EEPROM may not have
+ * support for that module. setup_sfp() will fail in that case, so
+ * we should not allow that module to load.
+ */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ err = hw->phy.ops.reset(hw);
+ else
+ err = hw->mac.ops.setup_sfp(hw);
+
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto sfp_out;
+
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+ e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
+
+sfp_out:
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
+ if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) &&
+ (adapter->netdev->reg_state == NETREG_REGISTERED)) {
+ e_dev_err("failed to initialize because an unsupported "
+ "SFP+ module type was detected.\n");
+ e_dev_err("Reload the driver after installing a "
+ "supported module.\n");
+ unregister_netdev(adapter->netdev);
+ }
+}
+
+/**
+ * ixgbe_sfp_link_config_subtask - set up link SFP after module install
+ * @adapter - the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 autoneg;
+ bool negotiation;
+
+ if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG))
+ return;
+
+ /* someone else is in init, wait until next service event */
+ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ return;
+
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
+ autoneg = hw->phy.autoneg_advertised;
+ if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
+ hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+ hw->mac.autotry_restart = false;
+ if (hw->mac.ops.setup_link)
+ hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
+
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+}
+
+/**
+ * ixgbe_service_timer - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ixgbe_service_timer(unsigned long data)
+{
+ struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
+ unsigned long next_event_offset;
+
+ /* poll faster when waiting for link */
+ if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
+ next_event_offset = HZ / 10;
+ else
+ next_event_offset = HZ * 2;
+
+ /* Reset the timer */
+ mod_timer(&adapter->service_timer, next_event_offset + jiffies);
+
+ ixgbe_service_event_schedule(adapter);
+}
+
+static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
+{
+ if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED;
+
+ /* If we're already down or resetting, just bail */
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
+
+ ixgbe_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
+ adapter->tx_timeout_count++;
+
+ ixgbe_reinit_locked(adapter);
+}
+
+/**
+ * ixgbe_service_task - manages and runs subtasks
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_service_task(struct work_struct *work)
+{
+ struct ixgbe_adapter *adapter = container_of(work,
+ struct ixgbe_adapter,
+ service_task);
+
+ ixgbe_reset_subtask(adapter);
+ ixgbe_sfp_detection_subtask(adapter);
+ ixgbe_sfp_link_config_subtask(adapter);
+ ixgbe_check_overtemp_subtask(adapter);
+ ixgbe_watchdog_subtask(adapter);
+ ixgbe_fdir_reinit_subtask(adapter);
+ ixgbe_check_hang_subtask(adapter);
+
+ ixgbe_service_event_complete(adapter);
}
static int ixgbe_tso(struct ixgbe_adapter *adapter,
@@ -7094,6 +7239,8 @@
#ifdef CONFIG_PCI_IOV
struct ixgbe_hw *hw = &adapter->hw;
int err;
+ int num_vf_macvlans, i;
+ struct vf_macvlans *mv_list;
if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs)
return;
@@ -7110,6 +7257,26 @@
e_err(probe, "Failed to enable PCI sriov: %d\n", err);
goto err_novfs;
}
+
+ num_vf_macvlans = hw->mac.num_rar_entries -
+ (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
+
+ adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
+ sizeof(struct vf_macvlans),
+ GFP_KERNEL);
+ if (mv_list) {
+ /* Initialize list of VF macvlans */
+ INIT_LIST_HEAD(&adapter->vf_mvs.l);
+ for (i = 0; i < num_vf_macvlans; i++) {
+ mv_list->vf = -1;
+ mv_list->free = true;
+ mv_list->rar_entry = hw->mac.num_rar_entries -
+ (i + adapter->num_vfs + 1);
+ list_add(&mv_list->l, &adapter->vf_mvs.l);
+ mv_list++;
+ }
+ }
+
/* If call to enable VFs succeeded then allocate memory
* for per VF control structures.
*/
@@ -7280,22 +7447,6 @@
hw->phy.mdio.mdio_read = ixgbe_mdio_read;
hw->phy.mdio.mdio_write = ixgbe_mdio_write;
- /* set up this timer and work struct before calling get_invariants
- * which might start the timer
- */
- init_timer(&adapter->sfp_timer);
- adapter->sfp_timer.function = ixgbe_sfp_timer;
- adapter->sfp_timer.data = (unsigned long) adapter;
-
- INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task);
-
- /* multispeed fiber has its own tasklet, called from GPI SDP1 context */
- INIT_WORK(&adapter->multispeed_fiber_task, ixgbe_multispeed_fiber_task);
-
- /* a new SFP+ module arrival, called from GPI SDP2 context */
- INIT_WORK(&adapter->sfp_config_module_task,
- ixgbe_sfp_config_module_task);
-
ii->get_invariants(hw);
/* setup the private structure */
@@ -7329,17 +7480,9 @@
hw->phy.reset_if_overtemp = false;
if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
hw->mac.type == ixgbe_mac_82598EB) {
- /*
- * Start a kernel thread to watch for a module to arrive.
- * Only do this for 82598, since 82599 will generate
- * interrupts on module arrival.
- */
- set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
- mod_timer(&adapter->sfp_timer,
- round_jiffies(jiffies + (2 * HZ)));
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- e_dev_err("failed to initialize because an unsupported SFP+ "
+ e_dev_err("failed to load because an unsupported SFP+ "
"module type was detected.\n");
e_dev_err("Reload the driver after installing a supported "
"module.\n");
@@ -7361,9 +7504,16 @@
netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_TSO6;
netdev->features |= NETIF_F_GRO;
+ netdev->features |= NETIF_F_RXHASH;
- if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
netdev->features |= NETIF_F_SCTP_CSUM;
+ break;
+ default:
+ break;
+ }
netdev->vlan_features |= NETIF_F_TSO;
netdev->vlan_features |= NETIF_F_TSO6;
@@ -7424,17 +7574,19 @@
(hw->mac.type == ixgbe_mac_82599EB))))
hw->mac.ops.disable_tx_laser(hw);
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = ixgbe_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
+ setup_timer(&adapter->service_timer, &ixgbe_service_timer,
+ (unsigned long) adapter);
- INIT_WORK(&adapter->reset_task, ixgbe_reset_task);
- INIT_WORK(&adapter->watchdog_task, ixgbe_watchdog_task);
+ INIT_WORK(&adapter->service_task, ixgbe_service_task);
+ clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
err = ixgbe_init_interrupt_scheme(adapter);
if (err)
goto err_sw_init;
+ if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+ netdev->features &= ~NETIF_F_RXHASH;
+
switch (pdev->device) {
case IXGBE_DEV_ID_82599_SFP:
/* Only this subdevice supports WOL */
@@ -7463,8 +7615,8 @@
/* print bus type/speed/width info */
e_dev_info("(PCI Express:%s:%s) %pM\n",
- (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0Gb/s" :
- hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5Gb/s" :
+ (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
+ hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
"Unknown"),
(hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" :
@@ -7513,13 +7665,6 @@
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
- adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
- INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task);
-
- if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
- INIT_WORK(&adapter->check_overtemp_task,
- ixgbe_check_overtemp_task);
#ifdef CONFIG_IXGBE_DCA
if (dca_add_requester(&pdev->dev) == 0) {
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
@@ -7546,11 +7691,7 @@
err_eeprom:
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
ixgbe_disable_sriov(adapter);
- clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
- del_timer_sync(&adapter->sfp_timer);
- cancel_work_sync(&adapter->sfp_task);
- cancel_work_sync(&adapter->multispeed_fiber_task);
- cancel_work_sync(&adapter->sfp_config_module_task);
+ adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
iounmap(hw->hw_addr);
err_ioremap:
free_netdev(netdev);
@@ -7578,24 +7719,7 @@
struct net_device *netdev = adapter->netdev;
set_bit(__IXGBE_DOWN, &adapter->state);
-
- /*
- * The timers may be rescheduled, so explicitly disable them
- * from being rescheduled.
- */
- clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->sfp_timer);
-
- cancel_work_sync(&adapter->watchdog_task);
- cancel_work_sync(&adapter->sfp_task);
- cancel_work_sync(&adapter->multispeed_fiber_task);
- cancel_work_sync(&adapter->sfp_config_module_task);
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
- adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
- cancel_work_sync(&adapter->fdir_reinit_task);
- if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
- cancel_work_sync(&adapter->check_overtemp_task);
+ cancel_work_sync(&adapter->service_task);
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ixgbe/ixgbe_mbx.h
index fe6ea81..b239bda 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ixgbe/ixgbe_mbx.h
@@ -36,9 +36,6 @@
#define IXGBE_VFMAILBOX 0x002FC
#define IXGBE_VFMBMEM 0x00200
-#define IXGBE_PFMAILBOX(x) (0x04B00 + (4 * x))
-#define IXGBE_PFMBMEM(vfn) (0x13000 + (64 * vfn))
-
#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */
#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
@@ -70,6 +67,7 @@
#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index df5b8aa..735f686 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -449,7 +449,8 @@
MDIO_MMD_AN,
&autoneg_reg);
- autoneg_reg &= ~ADVERTISE_100FULL;
+ autoneg_reg &= ~(ADVERTISE_100FULL |
+ ADVERTISE_100HALF);
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
autoneg_reg |= ADVERTISE_100FULL;
@@ -656,7 +657,8 @@
MDIO_MMD_AN,
&autoneg_reg);
- autoneg_reg &= ~ADVERTISE_100FULL;
+ autoneg_reg &= ~(ADVERTISE_100FULL |
+ ADVERTISE_100HALF);
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
autoneg_reg |= ADVERTISE_100FULL;
@@ -753,7 +755,7 @@
&phy_data);
if ((phy_data & MDIO_CTRL1_RESET) == 0)
break;
- msleep(10);
+ usleep_range(10000, 20000);
}
if ((phy_data & MDIO_CTRL1_RESET) != 0) {
@@ -782,7 +784,7 @@
case IXGBE_DELAY_NL:
data_offset++;
hw_dbg(hw, "DELAY: %d MS\n", edata);
- msleep(edata);
+ usleep_range(edata * 1000, edata * 2000);
break;
case IXGBE_DATA_NL:
hw_dbg(hw, "DATA:\n");
@@ -1220,7 +1222,7 @@
swfw_mask = IXGBE_GSSR_PHY0_SM;
do {
- if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
status = IXGBE_ERR_SWFW_SYNC;
goto read_byte_out;
}
@@ -1267,7 +1269,7 @@
break;
fail:
- ixgbe_release_swfw_sync(hw, swfw_mask);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
msleep(100);
ixgbe_i2c_bus_clear(hw);
retry++;
@@ -1278,7 +1280,7 @@
} while (retry < max_retry);
- ixgbe_release_swfw_sync(hw, swfw_mask);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
read_byte_out:
return status;
@@ -1306,7 +1308,7 @@
else
swfw_mask = IXGBE_GSSR_PHY0_SM;
- if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
status = IXGBE_ERR_SWFW_SYNC;
goto write_byte_out;
}
@@ -1350,7 +1352,7 @@
hw_dbg(hw, "I2C byte write error.\n");
} while (retry < max_retry);
- ixgbe_release_swfw_sync(hw, swfw_mask);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
write_byte_out:
return status;
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 6e50d83..ac99b04 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -82,6 +82,21 @@
return 0;
}
+static void ixgbe_restore_vf_macvlans(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct list_head *pos;
+ struct vf_macvlans *entry;
+
+ list_for_each(pos, &adapter->vf_mvs.l) {
+ entry = list_entry(pos, struct vf_macvlans, l);
+ if (entry->free == false)
+ hw->mac.ops.set_rar(hw, entry->rar_entry,
+ entry->vf_macvlan,
+ entry->vf, IXGBE_RAH_AV);
+ }
+}
+
void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
@@ -102,6 +117,9 @@
IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
}
}
+
+ /* Restore any VF macvlans */
+ ixgbe_restore_vf_macvlans(adapter);
}
static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
@@ -110,7 +128,7 @@
return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
}
-void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
+static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
{
struct ixgbe_hw *hw = &adapter->hw;
int new_mtu = msgbuf[1];
@@ -200,6 +218,61 @@
return 0;
}
+static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
+ int vf, int index, unsigned char *mac_addr)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct list_head *pos;
+ struct vf_macvlans *entry;
+
+ if (index <= 1) {
+ list_for_each(pos, &adapter->vf_mvs.l) {
+ entry = list_entry(pos, struct vf_macvlans, l);
+ if (entry->vf == vf) {
+ entry->vf = -1;
+ entry->free = true;
+ entry->is_macvlan = false;
+ hw->mac.ops.clear_rar(hw, entry->rar_entry);
+ }
+ }
+ }
+
+ /*
+ * If index was zero then we were asked to clear the uc list
+ * for the VF. We're done.
+ */
+ if (!index)
+ return 0;
+
+ entry = NULL;
+
+ list_for_each(pos, &adapter->vf_mvs.l) {
+ entry = list_entry(pos, struct vf_macvlans, l);
+ if (entry->free)
+ break;
+ }
+
+ /*
+ * If we traversed the entire list and didn't find a free entry
+ * then we're out of space on the RAR table. Also entry may
+ * be NULL because the original memory allocation for the list
+ * failed, which is not fatal but does mean we can't support
+ * VF requests for MACVLAN because we couldn't allocate
+ * memory for the list management required.
+ */
+ if (!entry || !entry->free)
+ return -ENOSPC;
+
+ entry->free = false;
+ entry->is_macvlan = true;
+ entry->vf = vf;
+ memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
+
+ hw->mac.ops.set_rar(hw, entry->rar_entry, mac_addr, vf, IXGBE_RAH_AV);
+
+ return 0;
+}
+
int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
{
unsigned char vf_mac_addr[6];
@@ -251,12 +324,12 @@
static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
{
u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
- u32 msgbuf[mbx_size];
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
struct ixgbe_hw *hw = &adapter->hw;
s32 retval;
int entries;
u16 *hash_list;
- int add, vid;
+ int add, vid, index;
u8 *new_mac;
retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
@@ -345,6 +418,24 @@
retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
}
break;
+ case IXGBE_VF_SET_MACVLAN:
+ index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
+ IXGBE_VT_MSGINFO_SHIFT;
+ /*
+ * If the VF is allowed to set MAC filters then turn off
+ * anti-spoofing to avoid false positives. An index
+ * greater than 0 will indicate the VF is setting a
+ * macvlan MAC filter.
+ */
+ if (index > 0 && adapter->antispoofing_enabled) {
+ hw->mac.ops.set_mac_anti_spoofing(hw, false,
+ adapter->num_vfs);
+ hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
+ adapter->antispoofing_enabled = false;
+ }
+ retval = ixgbe_set_vf_macvlan(adapter, vf, index,
+ (unsigned char *)(&msgbuf[1]));
+ break;
default:
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
retval = IXGBE_ERR_MBX;
@@ -452,7 +543,8 @@
goto out;
ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
ixgbe_set_vmolr(hw, vf, false);
- hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+ if (adapter->antispoofing_enabled)
+ hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
adapter->vfinfo[vf].pf_vlan = vlan;
adapter->vfinfo[vf].pf_qos = qos;
dev_info(&adapter->pdev->dev,
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 25c1fb7..fa43f25 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -58,9 +58,11 @@
#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529
#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9
#define IXGBE_DEV_ID_82599_SFP_EM 0x1507
+#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D
#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C
+#define IXGBE_DEV_ID_82599_LS 0x154F
#define IXGBE_DEV_ID_X540T 0x1528
/* General Registers */
@@ -163,6 +165,9 @@
(0x0D018 + ((_i - 64) * 0x40)))
#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
(0x0D028 + ((_i - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+ (0x0D02C + ((_i - 64) * 0x40)))
+#define IXGBE_RSCDBU 0x03028
#define IXGBE_RDDCC 0x02F20
#define IXGBE_RXMEMWRAP 0x03190
#define IXGBE_STARCTRL 0x03024
@@ -227,17 +232,23 @@
#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */
#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */
#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */
-#define IXGBE_VT_CTL 0x051B0
-#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
-#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
-#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
-#define IXGBE_QDE 0x2F04
-#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
-#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
-#define IXGBE_VMRCTL(_i) (0x0F600 + ((_i) * 4))
-#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4))
-#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4))
-#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_VT_CTL 0x051B0
+#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */
+#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
+#define IXGBE_QDE 0x2F04
+#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4))
+#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0 0x051B8
#define IXGBE_LLITHRESH 0x0EC90
#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -364,7 +375,7 @@
#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */
#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
-#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all 6 wakeup filters*/
+#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all wakeup filters */
#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
/* Wake Up Status */
@@ -406,7 +417,6 @@
#define IXGBE_SECTXSTAT 0x08804
#define IXGBE_SECTXBUFFAF 0x08808
#define IXGBE_SECTXMINIFG 0x08810
-#define IXGBE_SECTXSTAT 0x08804
#define IXGBE_SECRXCTRL 0x08D00
#define IXGBE_SECRXSTAT 0x08D04
@@ -499,21 +509,6 @@
#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4
-/* HW RSC registers */
-#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
- (0x0D02C + ((_i - 64) * 0x40)))
-#define IXGBE_RSCDBU 0x03028
-#define IXGBE_RSCCTL_RSCEN 0x01
-#define IXGBE_RSCCTL_MAXDESC_1 0x00
-#define IXGBE_RSCCTL_MAXDESC_4 0x04
-#define IXGBE_RSCCTL_MAXDESC_8 0x08
-#define IXGBE_RSCCTL_MAXDESC_16 0x0C
-#define IXGBE_RXDADV_RSCCNT_SHIFT 17
-#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
-#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
-#define IXGBE_RSCDBU_RSCACKDIS 0x00000080
-#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000
-
/* DCB registers */
#define IXGBE_RTRPCS 0x02430
#define IXGBE_RTTDCS 0x04900
@@ -522,6 +517,7 @@
#define IXGBE_RTRUP2TC 0x03020
#define IXGBE_RTTUP2TC 0x0C800
#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -540,7 +536,7 @@
(IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
-/* FCoE registers */
+/* FCoE DMA Context Registers */
#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */
#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */
#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */
@@ -677,6 +673,10 @@
#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */
#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */
#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */
+#define IXGBE_O2BGPTC 0x041C4
+#define IXGBE_O2BSPC 0x087B0
+#define IXGBE_B2OSPC 0x041C0
+#define IXGBE_B2OGPRC 0x02F90
#define IXGBE_PCRC8ECL 0x0E810
#define IXGBE_PCRC8ECH 0x0E811
#define IXGBE_PCRC8ECH_MASK 0x1F
@@ -742,17 +742,10 @@
#define IXGBE_PBACLR_82599 0x11068
#define IXGBE_CIAA_82599 0x11088
#define IXGBE_CIAD_82599 0x1108C
-#define IXGBE_PCIE_DIAG_0_82599 0x11090
-#define IXGBE_PCIE_DIAG_1_82599 0x11094
-#define IXGBE_PCIE_DIAG_2_82599 0x11098
-#define IXGBE_PCIE_DIAG_3_82599 0x1109C
-#define IXGBE_PCIE_DIAG_4_82599 0x110A0
-#define IXGBE_PCIE_DIAG_5_82599 0x110A4
-#define IXGBE_PCIE_DIAG_6_82599 0x110A8
-#define IXGBE_PCIE_DIAG_7_82599 0x110C0
-#define IXGBE_INTRPT_CSR_82599 0x110B0
-#define IXGBE_INTRPT_MASK_82599 0x110B8
+#define IXGBE_PICAUSE 0x110B0
+#define IXGBE_PIENA 0x110B8
#define IXGBE_CDQ_MBR_82599 0x110B4
+#define IXGBE_PCIESPARE 0x110BC
#define IXGBE_MISC_REG_82599 0x110F0
#define IXGBE_ECC_CTRL_0_82599 0x11100
#define IXGBE_ECC_CTRL_1_82599 0x11104
@@ -785,7 +778,19 @@
#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */
#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */
#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */
-#define IXGBE_RXUDP 0x08C1C /* Time Sync Rx UDP Port - RW */
+#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
/* Diagnostic Registers */
#define IXGBE_RDSTATCTL 0x02C20
@@ -829,8 +834,20 @@
#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
#define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
#define IXGBE_PCIEECCCTL0 0x11100
#define IXGBE_PCIEECCCTL1 0x11104
+#define IXGBE_RXDBUECC 0x03F70
+#define IXGBE_TXDBUECC 0x0CF70
+#define IXGBE_RXDBUEST 0x03F74
+#define IXGBE_TXDBUEST 0x0CF74
#define IXGBE_PBTXECC 0x0C300
#define IXGBE_PBRXECC 0x03300
#define IXGBE_GHECCR 0x110B0
@@ -871,6 +888,7 @@
#define IXGBE_AUTOC3 0x042AC
#define IXGBE_ANLP1 0x042B0
#define IXGBE_ANLP2 0x042B4
+#define IXGBE_MACC 0x04330
#define IXGBE_ATLASCTL 0x04800
#define IXGBE_MMNGC 0x042D0
#define IXGBE_ANLPNP1 0x042D4
@@ -883,14 +901,49 @@
#define IXGBE_MPVC 0x04318
#define IXGBE_SGMIIC 0x04314
+/* Statistics Registers */
+#define IXGBE_RXNFGPC 0x041B0
+#define IXGBE_RXNFGBCL 0x041B4
+#define IXGBE_RXNFGBCH 0x041B8
+#define IXGBE_RXDGPC 0x02F50
+#define IXGBE_RXDGBCL 0x02F54
+#define IXGBE_RXDGBCH 0x02F58
+#define IXGBE_RXDDGPC 0x02F5C
+#define IXGBE_RXDDGBCL 0x02F60
+#define IXGBE_RXDDGBCH 0x02F64
+#define IXGBE_RXLPBKGPC 0x02F68
+#define IXGBE_RXLPBKGBCL 0x02F6C
+#define IXGBE_RXLPBKGBCH 0x02F70
+#define IXGBE_RXDLPBKGPC 0x02F74
+#define IXGBE_RXDLPBKGBCL 0x02F78
+#define IXGBE_RXDLPBKGBCH 0x02F7C
+#define IXGBE_TXDGPC 0x087A0
+#define IXGBE_TXDGBCL 0x087A4
+#define IXGBE_TXDGBCH 0x087A8
+
+#define IXGBE_RXDSTATCTRL 0x02F40
+
+/* Copper Pond 2 link timeout */
#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
/* Omer CORECTL */
#define IXGBE_CORECTL 0x014F00
/* BARCTRL */
-#define IXGBE_BARCTRL 0x110F4
-#define IXGBE_BARCTRL_FLSIZE 0x0700
-#define IXGBE_BARCTRL_CSRSIZE 0x2000
+#define IXGBE_BARCTRL 0x110F4
+#define IXGBE_BARCTRL_FLSIZE 0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT 8
+#define IXGBE_BARCTRL_CSRSIZE 0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN 0x01
+#define IXGBE_RSCCTL_MAXDESC_1 0x00
+#define IXGBE_RSCCTL_MAXDESC_4 0x04
+#define IXGBE_RSCCTL_MAXDESC_8 0x08
+#define IXGBE_RSCCTL_MAXDESC_16 0x0C
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS 0x00000080
/* RDRXCTL Bit Masks */
#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */
@@ -898,6 +951,8 @@
#define IXGBE_RDRXCTL_MVMEN 0x00000020
#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disable RSC compl on LLI */
#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC enabled */
#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC enabled */
@@ -969,8 +1024,8 @@
#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */
#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */
#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (write) */
-#define IXGBE_MSCA_READ 0x08000000 /* OP CODE 10 (read) */
-#define IXGBE_MSCA_READ_AUTOINC 0x0C000000 /* OP CODE 11 (read, auto inc)*/
+#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (read) */
+#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (read, auto inc)*/
#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */
#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */
#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new protocol) */
@@ -1057,6 +1112,7 @@
#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
#define IXGBE_GPIE_EIAME 0x40000000
#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */
#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */
#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */
@@ -1291,6 +1347,11 @@
#define IXGBE_FTQF_POOL_SHIFT 8
#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F
#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK 0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F
#define IXGBE_FTQF_POOL_MASK_EN 0x40000000
#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000
@@ -1333,11 +1394,11 @@
*
* Current filters:
* EAPOL 802.1x (0x888e): Filter 0
- * BCN (0x8904): Filter 1
+ * FCoE (0x8906): Filter 2
* 1588 (0x88f7): Filter 3
+ * FIP (0x8914): Filter 4
*/
#define IXGBE_ETQF_FILTER_EAPOL 0
-#define IXGBE_ETQF_FILTER_BCN 1
#define IXGBE_ETQF_FILTER_FCOE 2
#define IXGBE_ETQF_FILTER_1588 3
#define IXGBE_ETQF_FILTER_FIP 4
@@ -1448,6 +1509,11 @@
#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_MACC_FLU 0x00000001
+#define IXGBE_MACC_FSV_10G 0x00030000
+#define IXGBE_MACC_FS 0x00040000
+#define IXGBE_MAC_RX2TX_LPBK 0x00000002
+
/* LINKS Bit Masks */
#define IXGBE_LINKS_KX_AN_COMP 0x80000000
#define IXGBE_LINKS_UP 0x40000000
@@ -1501,7 +1567,6 @@
#define IXGBE_ANLP1_ASM_PAUSE 0x0800
#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000
-
/* SW Semaphore Register bitmasks */
#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
@@ -1514,6 +1579,10 @@
#define IXGBE_GSSR_PHY1_SM 0x0004
#define IXGBE_GSSR_MAC_CSR_SM 0x0008
#define IXGBE_GSSR_FLASH_SM 0x0010
+#define IXGBE_GSSR_SW_MNG_SM 0x0400
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */
/* EEC Register */
#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */
@@ -1534,6 +1603,7 @@
/* EEPROM Addressing bits based on type (0-small, 1-large) */
#define IXGBE_EEC_ADDR_SIZE 0x00000400
#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
#define IXGBE_EEC_SIZE_SHIFT 11
#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6
@@ -1563,8 +1633,10 @@
#define IXGBE_FW_PTR 0x0F
#define IXGBE_PBANUM0_PTR 0x15
#define IXGBE_PBANUM1_PTR 0x16
-#define IXGBE_DEVICE_CAPS 0x2C
+#define IXGBE_FREE_SPACE_PTR 0X3E
#define IXGBE_SAN_MAC_ADDR_PTR 0x28
+#define IXGBE_DEVICE_CAPS 0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
#define IXGBE_PCIE_MSIX_82599_CAPS 0x72
#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
@@ -1601,6 +1673,10 @@
#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
+#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
+#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
+#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
+
#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
#endif
@@ -1616,14 +1692,25 @@
#define IXGBE_FLUDONE_ATTEMPTS 20000
#endif
+#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */
+#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */
+#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */
+#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */
+
#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0
#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3
#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1
#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2
+#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2
+#define IXGBE_FW_LESM_STATE_1 0x1
+#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */
#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4
-#define IXGBE_FW_PATCH_VERSION_4 0x7
-
-/* Alternative SAN MAC Address Block */
+#define IXGBE_FW_PATCH_VERSION_4 0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */
#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */
#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt. SAN MAC capability */
#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
@@ -1688,6 +1775,7 @@
/* Transmit Config masks */
#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */
#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. write-back flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */
/* Enable short packet padding to 64 bytes */
#define IXGBE_TX_PAD_ENABLE 0x00000400
#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */
@@ -1701,9 +1789,9 @@
#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
-#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
#define IXGBE_RXDCTL_RLPML_EN 0x00008000
+#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
@@ -1719,6 +1807,8 @@
#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */
#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */
+#define IXGBE_MFLCN_RPFCE_SHIFT 4
+
/* Multiple Receive Queue Control */
#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */
#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */
@@ -1859,6 +1949,8 @@
#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT 17
#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
#define IXGBE_RXDADV_SPH 0x8000
@@ -1934,15 +2026,6 @@
#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600))
#define IXGBE_VFLREC(_i) (0x00700 + (_i * 4))
-/* Little Endian defines */
-#ifndef __le32
-#define __le32 u32
-#endif
-#ifndef __le64
-#define __le64 u64
-
-#endif
-
enum ixgbe_fdir_pballoc_type {
IXGBE_FDIR_PBALLOC_64K = 0,
IXGBE_FDIR_PBALLOC_128K,
@@ -2141,8 +2224,6 @@
IXGBE_LINK_SPEED_1GB_FULL | \
IXGBE_LINK_SPEED_10GB_FULL)
-#define IXGBE_PCIE_DEV_CTRL_2 0xC8
-#define PCIE_COMPL_TO_VALUE 0x05
/* Physical layer type */
typedef u32 ixgbe_physical_layer;
@@ -2315,6 +2396,7 @@
enum ixgbe_media_type {
ixgbe_media_type_unknown = 0,
ixgbe_media_type_fiber,
+ ixgbe_media_type_fiber_lco,
ixgbe_media_type_copper,
ixgbe_media_type_backplane,
ixgbe_media_type_cx4,
@@ -2478,6 +2560,10 @@
u64 fcoeptc;
u64 fcoedwrc;
u64 fcoedwtc;
+ u64 b2ospc;
+ u64 b2ogprc;
+ u64 o2bgptc;
+ u64 o2bspc;
};
/* forward declaration */
@@ -2491,7 +2577,9 @@
struct ixgbe_eeprom_operations {
s32 (*init_params)(struct ixgbe_hw *);
s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+ s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
s32 (*write)(struct ixgbe_hw *, u16, u16);
+ s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
s32 (*update_checksum)(struct ixgbe_hw *);
u16 (*calc_checksum)(struct ixgbe_hw *);
@@ -2577,6 +2665,7 @@
u32 semaphore_delay;
u16 word_size;
u16 address_bits;
+ u16 word_page_size;
};
#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01
@@ -2597,6 +2686,7 @@
u32 vft_size;
u32 num_rar_entries;
u32 rar_highwater;
+ u32 rx_pb_size;
u32 max_tx_queues;
u32 max_rx_queues;
u32 max_msix_vectors;
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index d9323c08..4ed687b 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -37,6 +37,7 @@
#define IXGBE_X540_RAR_ENTRIES 128
#define IXGBE_X540_MC_TBL_SIZE 128
#define IXGBE_X540_VFT_TBL_SIZE 128
+#define IXGBE_X540_RX_PB_SIZE 384
static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
@@ -226,6 +227,28 @@
}
/**
+ * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = ixgbe_start_hw_gen2(hw);
+ hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE;
+out:
+ return ret_val;
+}
+
+/**
* ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
* @hw: pointer to hardware structure
*
@@ -281,74 +304,105 @@
}
/**
- * ixgbe_read_eerd_X540 - Read EEPROM word using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EERPOM
+ * ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
**/
static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
- s32 status;
+ s32 status = 0;
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ 0)
status = ixgbe_read_eerd_generic(hw, offset, data);
else
status = IXGBE_ERR_SWFW_SYNC;
- ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
- * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
+ * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
*
- * Write a 16 bit word to the EEPROM using the EEWR register.
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ 0)
+ status = ixgbe_read_eerd_buffer_generic(hw, offset,
+ words, data);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
**/
static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
{
- u32 eewr;
- s32 status;
+ s32 status = 0;
- hw->eeprom.ops.init_params(hw);
-
- if (offset >= hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) |
- (data << IXGBE_EEPROM_RW_REG_DATA) |
- IXGBE_EEPROM_RW_REG_START;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
- if (status != 0) {
- hw_dbg(hw, "Eeprom write EEWR timed out\n");
- goto out;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
-
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
- if (status != 0) {
- hw_dbg(hw, "Eeprom write EEWR timed out\n");
- goto out;
- }
- } else {
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
+ status = ixgbe_write_eewr_generic(hw, offset, data);
+ else
status = IXGBE_ERR_SWFW_SYNC;
- }
-out:
- ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
- * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
- * @hw: pointer to hardware structure
+ * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ 0)
+ status = ixgbe_write_eewr_buffer_generic(hw, offset,
+ words, data);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ * This function does not use synchronization for EERD and EEWR. It can
+ * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ * @hw: pointer to hardware structure
**/
static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
{
@@ -359,9 +413,15 @@
u16 pointer = 0;
u16 word = 0;
+ /*
+ * Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores here. Instead use
+ * ixgbe_read_eerd_generic
+ */
+
/* Include 0x0-0x3F in the checksum */
for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
- if (hw->eeprom.ops.read(hw, i, &word) != 0) {
+ if (ixgbe_read_eerd_generic(hw, i, &word) != 0) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
@@ -376,7 +436,7 @@
if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
continue;
- if (hw->eeprom.ops.read(hw, i, &pointer) != 0) {
+ if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
@@ -386,7 +446,7 @@
pointer >= hw->eeprom.word_size)
continue;
- if (hw->eeprom.ops.read(hw, pointer, &length) != 0) {
+ if (ixgbe_read_eerd_generic(hw, pointer, &length) != 0) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
@@ -397,7 +457,7 @@
continue;
for (j = pointer+1; j <= pointer+length; j++) {
- if (hw->eeprom.ops.read(hw, j, &word) != 0) {
+ if (ixgbe_read_eerd_generic(hw, j, &word) != 0) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
@@ -411,6 +471,62 @@
}
/**
+ * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+ u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ goto out;
+ }
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+ checksum = hw->eeprom.ops.calc_checksum(hw);
+
+ /*
+ * Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores twice here.
+ */
+ ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+
+ /*
+ * Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum)
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+out:
+ return status;
+}
+
+/**
* ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
* @hw: pointer to hardware structure
*
@@ -421,11 +537,35 @@
static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
{
s32 status;
+ u16 checksum;
- status = ixgbe_update_eeprom_checksum_generic(hw);
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
- if (status)
+ if (status != 0)
+ hw_dbg(hw, "EEPROM read failed\n");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+ checksum = hw->eeprom.ops.calc_checksum(hw);
+
+ /*
+ * Do not use hw->eeprom.ops.write because we do not want to
+ * take the synchronization semaphores twice here.
+ */
+ status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+
+ if (status == 0)
status = ixgbe_update_flash_X540(hw);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
@@ -452,7 +592,7 @@
IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
status = ixgbe_poll_flash_update_done_X540(hw);
- if (status)
+ if (status == 0)
hw_dbg(hw, "Flash update complete\n");
else
hw_dbg(hw, "Flash update time out\n");
@@ -466,11 +606,10 @@
}
status = ixgbe_poll_flash_update_done_X540(hw);
- if (status)
+ if (status == 0)
hw_dbg(hw, "Flash update complete\n");
else
hw_dbg(hw, "Flash update time out\n");
-
}
out:
return status;
@@ -542,7 +681,7 @@
* resource (swmask)
*/
ixgbe_release_swfw_sync_semaphore(hw);
- msleep(5);
+ usleep_range(5000, 10000);
}
}
@@ -564,7 +703,7 @@
}
}
- msleep(5);
+ usleep_range(5000, 10000);
return 0;
}
@@ -588,7 +727,7 @@
IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
ixgbe_release_swfw_sync_semaphore(hw);
- msleep(5);
+ usleep_range(5000, 10000);
}
/**
@@ -658,10 +797,70 @@
IXGBE_WRITE_FLUSH(hw);
}
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+
+ /*
+ * In order for the blink bit in the LED control register
+ * to work, link and speed must be forced in the MAC. We
+ * will reverse this when we stop the blinking.
+ */
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+
+ /* Set the LED to LINK_UP + BLINK. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+
+ /* Restore the LED to its default value. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ ledctl_reg &= ~IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+ /* Unforce link and speed in the MAC. */
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
static struct ixgbe_mac_operations mac_ops_X540 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_X540,
- .start_hw = &ixgbe_start_hw_generic,
+ .start_hw = &ixgbe_start_hw_X540,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_X540,
.get_supported_physical_layer =
@@ -669,7 +868,7 @@
.enable_rx_dma = &ixgbe_enable_rx_dma_generic,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
- .get_device_caps = NULL,
+ .get_device_caps = &ixgbe_get_device_caps_generic,
.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
.get_bus_info = &ixgbe_get_bus_info_generic,
@@ -681,8 +880,8 @@
.get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_generic,
- .blink_led_stop = &ixgbe_blink_led_stop_generic,
+ .blink_led_start = &ixgbe_blink_led_start_X540,
+ .blink_led_stop = &ixgbe_blink_led_stop_X540,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_generic,
@@ -705,9 +904,11 @@
static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
.init_params = &ixgbe_init_eeprom_params_X540,
.read = &ixgbe_read_eerd_X540,
+ .read_buffer = &ixgbe_read_eerd_buffer_X540,
.write = &ixgbe_write_eewr_X540,
+ .write_buffer = &ixgbe_write_eewr_buffer_X540,
.calc_checksum = &ixgbe_calc_eeprom_checksum_X540,
- .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_X540,
.update_checksum = &ixgbe_update_eeprom_checksum_X540,
};
diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ixgbevf/ethtool.c
index 0563ab2..deee375 100644
--- a/drivers/net/ixgbevf/ethtool.c
+++ b/drivers/net/ixgbevf/ethtool.c
@@ -104,11 +104,13 @@
hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
if (link_up) {
- ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
- SPEED_10000 : SPEED_1000;
+ ethtool_cmd_speed_set(
+ ecmd,
+ (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+ SPEED_10000 : SPEED_1000);
ecmd->duplex = DUPLEX_FULL;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 05fa7c8..d7ab202 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -1460,6 +1460,34 @@
}
}
+static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int count = 0;
+
+ if ((netdev_uc_count(netdev)) > 10) {
+ printk(KERN_ERR "Too many unicast filters - No Space\n");
+ return -ENOSPC;
+ }
+
+ if (!netdev_uc_empty(netdev)) {
+ struct netdev_hw_addr *ha;
+ netdev_for_each_uc_addr(ha, netdev) {
+ hw->mac.ops.set_uc_addr(hw, ++count, ha->addr);
+ udelay(200);
+ }
+ } else {
+ /*
+ * If the list is empty then send message to PF driver to
+ * clear all macvlans on this VF.
+ */
+ hw->mac.ops.set_uc_addr(hw, 0, NULL);
+ }
+
+ return count;
+}
+
/**
* ixgbevf_set_rx_mode - Multicast set
* @netdev: network interface device structure
@@ -1476,6 +1504,8 @@
/* reprogram multicast list */
if (hw->mac.ops.update_mc_addr_list)
hw->mac.ops.update_mc_addr_list(hw, netdev);
+
+ ixgbevf_write_uc_addr_list(netdev);
}
static void ixgbevf_napi_enable_all(struct ixgbevf_adapter *adapter)
diff --git a/drivers/net/ixgbevf/mbx.h b/drivers/net/ixgbevf/mbx.h
index b2b5bf5..ea393eb 100644
--- a/drivers/net/ixgbevf/mbx.h
+++ b/drivers/net/ixgbevf/mbx.h
@@ -81,6 +81,7 @@
#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ixgbevf/vf.c
index eecd3bf..aa3682e 100644
--- a/drivers/net/ixgbevf/vf.c
+++ b/drivers/net/ixgbevf/vf.c
@@ -216,6 +216,39 @@
return 0;
}
+static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, sizeof(msgbuf));
+ /*
+ * If index is one then this is the start of a new list and needs
+ * indication to the PF so it can do it's own list management.
+ * If it is zero then that tells the PF to just clear all of
+ * this VF's macvlans and there is no new list.
+ */
+ msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+ msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+ if (addr)
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ if (!ret_val)
+ if (msgbuf[0] ==
+ (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+ ret_val = -ENOMEM;
+
+ return ret_val;
+}
+
/**
* ixgbevf_set_rar_vf - set device MAC address
* @hw: pointer to hardware structure
@@ -378,6 +411,7 @@
.check_link = ixgbevf_check_mac_link_vf,
.set_rar = ixgbevf_set_rar_vf,
.update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
+ .set_uc_addr = ixgbevf_set_uc_addr_vf,
.set_vfta = ixgbevf_set_vfta_vf,
};
diff --git a/drivers/net/ixgbevf/vf.h b/drivers/net/ixgbevf/vf.h
index 23eb114..10306b4 100644
--- a/drivers/net/ixgbevf/vf.h
+++ b/drivers/net/ixgbevf/vf.h
@@ -62,6 +62,7 @@
/* RAR, Multicast, VLAN */
s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32);
+ s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *);
s32 (*init_rx_addrs)(struct ixgbe_hw *);
s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
s32 (*enable_mc)(struct ixgbe_hw *);
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 994c809..b5b174a 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2230,17 +2230,9 @@
jme_restart_rx_engine(jme);
}
- if (new_mtu > 1900) {
- netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_TSO | NETIF_F_TSO6);
- } else {
- if (test_bit(JME_FLAG_TXCSUM, &jme->flags))
- netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- if (test_bit(JME_FLAG_TSO, &jme->flags))
- netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
- }
-
netdev->mtu = new_mtu;
+ netdev_update_features(netdev);
+
jme_reset_link(jme);
return 0;
@@ -2563,7 +2555,8 @@
struct jme_adapter *jme = netdev_priv(netdev);
int rc, fdc = 0;
- if (ecmd->speed == SPEED_1000 && ecmd->autoneg != AUTONEG_ENABLE)
+ if (ethtool_cmd_speed(ecmd) == SPEED_1000
+ && ecmd->autoneg != AUTONEG_ENABLE)
return -EINVAL;
/*
@@ -2640,19 +2633,20 @@
}
static u32
-jme_get_rx_csum(struct net_device *netdev)
+jme_fix_features(struct net_device *netdev, u32 features)
{
- struct jme_adapter *jme = netdev_priv(netdev);
- return jme->reg_rxmcs & RXMCS_CHECKSUM;
+ if (netdev->mtu > 1900)
+ features &= ~(NETIF_F_ALL_TSO | NETIF_F_ALL_CSUM);
+ return features;
}
static int
-jme_set_rx_csum(struct net_device *netdev, u32 on)
+jme_set_features(struct net_device *netdev, u32 features)
{
struct jme_adapter *jme = netdev_priv(netdev);
spin_lock_bh(&jme->rxmcs_lock);
- if (on)
+ if (features & NETIF_F_RXCSUM)
jme->reg_rxmcs |= RXMCS_CHECKSUM;
else
jme->reg_rxmcs &= ~RXMCS_CHECKSUM;
@@ -2663,42 +2657,6 @@
}
static int
-jme_set_tx_csum(struct net_device *netdev, u32 on)
-{
- struct jme_adapter *jme = netdev_priv(netdev);
-
- if (on) {
- set_bit(JME_FLAG_TXCSUM, &jme->flags);
- if (netdev->mtu <= 1900)
- netdev->features |=
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- } else {
- clear_bit(JME_FLAG_TXCSUM, &jme->flags);
- netdev->features &=
- ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
- }
-
- return 0;
-}
-
-static int
-jme_set_tso(struct net_device *netdev, u32 on)
-{
- struct jme_adapter *jme = netdev_priv(netdev);
-
- if (on) {
- set_bit(JME_FLAG_TSO, &jme->flags);
- if (netdev->mtu <= 1900)
- netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
- } else {
- clear_bit(JME_FLAG_TSO, &jme->flags);
- netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
- }
-
- return 0;
-}
-
-static int
jme_nway_reset(struct net_device *netdev)
{
struct jme_adapter *jme = netdev_priv(netdev);
@@ -2839,11 +2797,6 @@
.get_link = jme_get_link,
.get_msglevel = jme_get_msglevel,
.set_msglevel = jme_set_msglevel,
- .get_rx_csum = jme_get_rx_csum,
- .set_rx_csum = jme_set_rx_csum,
- .set_tx_csum = jme_set_tx_csum,
- .set_tso = jme_set_tso,
- .set_sg = ethtool_op_set_sg,
.nway_reset = jme_nway_reset,
.get_eeprom_len = jme_get_eeprom_len,
.get_eeprom = jme_get_eeprom,
@@ -2903,6 +2856,8 @@
.ndo_change_mtu = jme_change_mtu,
.ndo_tx_timeout = jme_tx_timeout,
.ndo_vlan_rx_register = jme_vlan_rx_register,
+ .ndo_fix_features = jme_fix_features,
+ .ndo_set_features = jme_set_features,
};
static int __devinit
@@ -2957,6 +2912,12 @@
netdev->netdev_ops = &jme_netdev_ops;
netdev->ethtool_ops = &jme_ethtool_ops;
netdev->watchdog_timeo = TX_TIMEOUT;
+ netdev->hw_features = NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_SG |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_RXCSUM;
netdev->features = NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
NETIF_F_SG |
@@ -3040,8 +3001,9 @@
jme->reg_txpfc = 0;
jme->reg_pmcs = PMCS_MFEN;
jme->reg_gpreg1 = GPREG1_DEFAULT;
- set_bit(JME_FLAG_TXCSUM, &jme->flags);
- set_bit(JME_FLAG_TSO, &jme->flags);
+
+ if (jme->reg_rxmcs & RXMCS_CHECKSUM)
+ netdev->features |= NETIF_F_RXCSUM;
/*
* Get Max Read Req Size from PCI Config Space
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index 8bf3045..e9aaeca 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -468,8 +468,6 @@
enum jme_flags_bits {
JME_FLAG_MSI = 1,
JME_FLAG_SSET = 2,
- JME_FLAG_TXCSUM = 3,
- JME_FLAG_TSO = 4,
JME_FLAG_POLL = 5,
JME_FLAG_SHUTDOWN = 6,
};
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7f7d570..41ea592 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -1221,7 +1221,6 @@
#define LINK_INT_WORKING (1 << 0)
#define SMALL_PACKET_TX_BUG (1 << 1)
#define HALF_DUPLEX_SIGNAL_BUG (1 << 2)
-#define IPV6_CSUM_GEN_HACK (1 << 3)
#define RX_HUGE_FRAME (1 << 4)
#define STP_SUPPORT (1 << 8)
@@ -3748,7 +3747,6 @@
if (1 == rc)
hw->features |= HALF_DUPLEX_SIGNAL_BUG;
}
- hw->features |= IPV6_CSUM_GEN_HACK;
return rc;
}
@@ -4887,8 +4885,7 @@
left = hw_alloc_pkt(hw, skb->len, num);
if (left) {
if (left < num ||
- ((hw->features & IPV6_CSUM_GEN_HACK) &&
- (CHECKSUM_PARTIAL == skb->ip_summed) &&
+ ((CHECKSUM_PARTIAL == skb->ip_summed) &&
(ETH_P_IPV6 == htons(skb->protocol)))) {
struct sk_buff *org_skb = skb;
@@ -6001,6 +5998,7 @@
struct dev_priv *priv = netdev_priv(dev);
struct dev_info *hw_priv = priv->adapter;
struct ksz_port *port = &priv->port;
+ u32 speed = ethtool_cmd_speed(cmd);
int rc;
/*
@@ -6009,11 +6007,11 @@
*/
if (cmd->autoneg && priv->advertising == cmd->advertising) {
cmd->advertising |= ADVERTISED_ALL;
- if (10 == cmd->speed)
+ if (10 == speed)
cmd->advertising &=
~(ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half);
- else if (100 == cmd->speed)
+ else if (100 == speed)
cmd->advertising &=
~(ADVERTISED_10baseT_Full |
ADVERTISED_10baseT_Half);
@@ -6035,8 +6033,8 @@
port->force_link = 0;
} else {
port->duplex = cmd->duplex + 1;
- if (cmd->speed != 1000)
- port->speed = cmd->speed;
+ if (1000 != speed)
+ port->speed = speed;
if (cmd->autoneg)
port->force_link = 0;
else
@@ -6583,57 +6581,33 @@
}
/**
- * netdev_get_rx_csum - get receive checksum support
+ * netdev_set_features - set receive checksum support
* @dev: Network device.
- *
- * This function gets receive checksum support setting.
- *
- * Return true if receive checksum is enabled; false otherwise.
- */
-static u32 netdev_get_rx_csum(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- struct dev_info *hw_priv = priv->adapter;
- struct ksz_hw *hw = &hw_priv->hw;
-
- return hw->rx_cfg &
- (DMA_RX_CSUM_UDP |
- DMA_RX_CSUM_TCP |
- DMA_RX_CSUM_IP);
-}
-
-/**
- * netdev_set_rx_csum - set receive checksum support
- * @dev: Network device.
- * @data: Zero to disable receive checksum support.
+ * @features: New device features (offloads).
*
* This function sets receive checksum support setting.
*
* Return 0 if successful; otherwise an error code.
*/
-static int netdev_set_rx_csum(struct net_device *dev, u32 data)
+static int netdev_set_features(struct net_device *dev, u32 features)
{
struct dev_priv *priv = netdev_priv(dev);
struct dev_info *hw_priv = priv->adapter;
struct ksz_hw *hw = &hw_priv->hw;
- u32 new_setting = hw->rx_cfg;
- if (data)
- new_setting |=
- (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
- DMA_RX_CSUM_IP);
- else
- new_setting &=
- ~(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
- DMA_RX_CSUM_IP);
- new_setting &= ~DMA_RX_CSUM_UDP;
mutex_lock(&hw_priv->lock);
- if (new_setting != hw->rx_cfg) {
- hw->rx_cfg = new_setting;
- if (hw->enabled)
- writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
- }
+
+ /* see note in hw_setup() */
+ if (features & NETIF_F_RXCSUM)
+ hw->rx_cfg |= DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP;
+ else
+ hw->rx_cfg &= ~(DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP);
+
+ if (hw->enabled)
+ writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+
mutex_unlock(&hw_priv->lock);
+
return 0;
}
@@ -6658,12 +6632,6 @@
.get_strings = netdev_get_strings,
.get_sset_count = netdev_get_sset_count,
.get_ethtool_stats = netdev_get_ethtool_stats,
- .get_rx_csum = netdev_get_rx_csum,
- .set_rx_csum = netdev_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
};
/*
@@ -6828,14 +6796,15 @@
/* 500 ms timeout */
dev->watchdog_timeo = HZ / 2;
- dev->features |= NETIF_F_IP_CSUM;
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_RXCSUM;
/*
* Hardware does not really support IPv6 checksum generation, but
- * driver actually runs faster with this on. Refer IPV6_CSUM_GEN_HACK.
+ * driver actually runs faster with this on.
*/
- dev->features |= NETIF_F_IPV6_CSUM;
- dev->features |= NETIF_F_SG;
+ dev->hw_features |= NETIF_F_IPV6_CSUM;
+
+ dev->features |= dev->hw_features;
sema_init(&priv->proc_sem, 1);
@@ -6860,6 +6829,7 @@
.ndo_start_xmit = netdev_tx,
.ndo_tx_timeout = netdev_tx_timeout,
.ndo_change_mtu = netdev_change_mtu,
+ .ndo_set_features = netdev_set_features,
.ndo_set_mac_address = netdev_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = netdev_ioctl,
diff --git a/drivers/net/lantiq_etop.c b/drivers/net/lantiq_etop.c
new file mode 100644
index 0000000..45f252b
--- /dev/null
+++ b/drivers/net/lantiq_etop.c
@@ -0,0 +1,805 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+#include <lantiq_platform.h>
+
+#define LTQ_ETOP_MDIO 0x11804
+#define MDIO_REQUEST 0x80000000
+#define MDIO_READ 0x40000000
+#define MDIO_ADDR_MASK 0x1f
+#define MDIO_ADDR_OFFSET 0x15
+#define MDIO_REG_MASK 0x1f
+#define MDIO_REG_OFFSET 0x10
+#define MDIO_VAL_MASK 0xffff
+
+#define PPE32_CGEN 0x800
+#define LQ_PPE32_ENET_MAC_CFG 0x1840
+
+#define LTQ_ETOP_ENETS0 0x11850
+#define LTQ_ETOP_MAC_DA0 0x1186C
+#define LTQ_ETOP_MAC_DA1 0x11870
+#define LTQ_ETOP_CFG 0x16020
+#define LTQ_ETOP_IGPLEN 0x16080
+
+#define MAX_DMA_CHAN 0x8
+#define MAX_DMA_CRC_LEN 0x4
+#define MAX_DMA_DATA_LEN 0x600
+
+#define ETOP_FTCU BIT(28)
+#define ETOP_MII_MASK 0xf
+#define ETOP_MII_NORMAL 0xd
+#define ETOP_MII_REVERSE 0xe
+#define ETOP_PLEN_UNDER 0x40
+#define ETOP_CGEN 0x800
+
+/* use 2 static channels for TX/RX */
+#define LTQ_ETOP_TX_CHANNEL 1
+#define LTQ_ETOP_RX_CHANNEL 6
+#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
+#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+
+#define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
+#define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
+#define ltq_etop_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+#define DRV_VERSION "1.0"
+
+static void __iomem *ltq_etop_membase;
+
+struct ltq_etop_chan {
+ int idx;
+ int tx_free;
+ struct net_device *netdev;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+ struct sk_buff *skb[LTQ_DESC_NUM];
+};
+
+struct ltq_etop_priv {
+ struct net_device *netdev;
+ struct ltq_eth_data *pldata;
+ struct resource *res;
+
+ struct mii_bus *mii_bus;
+ struct phy_device *phydev;
+
+ struct ltq_etop_chan ch[MAX_DMA_CHAN];
+ int tx_free[MAX_DMA_CHAN >> 1];
+
+ spinlock_t lock;
+};
+
+static int
+ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+{
+ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+ if (!ch->skb[ch->dma.desc])
+ return -ENOMEM;
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+ ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
+ DMA_FROM_DEVICE);
+ ch->dma.desc_base[ch->dma.desc].addr =
+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
+ ch->dma.desc_base[ch->dma.desc].ctl =
+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+ MAX_DMA_DATA_LEN;
+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+ return 0;
+}
+
+static void
+ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+{
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (ltq_etop_alloc_skb(ch)) {
+ netdev_err(ch->netdev,
+ "failed to allocate new rx buffer, stopping DMA\n");
+ ltq_dma_close(&ch->dma);
+ }
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ skb_put(skb, len);
+ skb->dev = ch->netdev;
+ skb->protocol = eth_type_trans(skb, ch->netdev);
+ netif_receive_skb(skb);
+}
+
+static int
+ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+{
+ struct ltq_etop_chan *ch = container_of(napi,
+ struct ltq_etop_chan, napi);
+ int rx = 0;
+ int complete = 0;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+ ltq_etop_hw_receive(ch);
+ rx++;
+ } else {
+ complete = 1;
+ }
+ }
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
+ ltq_dma_ack_irq(&ch->dma);
+ }
+ return rx;
+}
+
+static int
+ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+{
+ struct ltq_etop_chan *ch =
+ container_of(napi, struct ltq_etop_chan, napi);
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ struct netdev_queue *txq =
+ netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ while ((ch->dma.desc_base[ch->tx_free].ctl &
+ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
+ ch->skb[ch->tx_free] = NULL;
+ memset(&ch->dma.desc_base[ch->tx_free], 0,
+ sizeof(struct ltq_dma_desc));
+ ch->tx_free++;
+ ch->tx_free %= LTQ_DESC_NUM;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (netif_tx_queue_stopped(txq))
+ netif_tx_start_queue(txq);
+ napi_complete(&ch->napi);
+ ltq_dma_ack_irq(&ch->dma);
+ return 1;
+}
+
+static irqreturn_t
+ltq_etop_dma_irq(int irq, void *_priv)
+{
+ struct ltq_etop_priv *priv = _priv;
+ int ch = irq - LTQ_DMA_CH0_INT;
+
+ napi_schedule(&priv->ch[ch].napi);
+ return IRQ_HANDLED;
+}
+
+static void
+ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ ltq_dma_free(&ch->dma);
+ if (ch->dma.irq)
+ free_irq(ch->dma.irq, priv);
+ if (IS_RX(ch->idx)) {
+ int desc;
+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+ }
+}
+
+static void
+ltq_etop_hw_exit(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int i;
+
+ ltq_pmu_disable(PMU_PPE);
+ for (i = 0; i < MAX_DMA_CHAN; i++)
+ if (IS_TX(i) || IS_RX(i))
+ ltq_etop_free_channel(dev, &priv->ch[i]);
+}
+
+static int
+ltq_etop_hw_init(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int i;
+
+ ltq_pmu_enable(PMU_PPE);
+
+ switch (priv->pldata->mii_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ ltq_etop_w32_mask(ETOP_MII_MASK,
+ ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+ break;
+
+ case PHY_INTERFACE_MODE_MII:
+ ltq_etop_w32_mask(ETOP_MII_MASK,
+ ETOP_MII_NORMAL, LTQ_ETOP_CFG);
+ break;
+
+ default:
+ netdev_err(dev, "unknown mii mode %d\n",
+ priv->pldata->mii_mode);
+ return -ENOTSUPP;
+ }
+
+ /* enable crc generation */
+ ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+ int irq = LTQ_DMA_CH0_INT + i;
+ struct ltq_etop_chan *ch = &priv->ch[i];
+
+ ch->idx = ch->dma.nr = i;
+
+ if (IS_TX(i)) {
+ ltq_dma_alloc_tx(&ch->dma);
+ request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+ "etop_tx", priv);
+ } else if (IS_RX(i)) {
+ ltq_dma_alloc_rx(&ch->dma);
+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+ ch->dma.desc++)
+ if (ltq_etop_alloc_skb(ch))
+ return -ENOMEM;
+ ch->dma.desc = 0;
+ request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+ "etop_rx", priv);
+ }
+ ch->dma.irq = irq;
+ }
+ return 0;
+}
+
+static void
+ltq_etop_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, "Lantiq ETOP");
+ strcpy(info->bus_info, "internal");
+ strcpy(info->version, DRV_VERSION);
+}
+
+static int
+ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_nway_reset(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ return phy_start_aneg(priv->phydev);
+}
+
+static const struct ethtool_ops ltq_etop_ethtool_ops = {
+ .get_drvinfo = ltq_etop_get_drvinfo,
+ .get_settings = ltq_etop_get_settings,
+ .set_settings = ltq_etop_set_settings,
+ .nway_reset = ltq_etop_nway_reset,
+};
+
+static int
+ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+{
+ u32 val = MDIO_REQUEST |
+ ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+ ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+ phy_data;
+
+ while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+ ;
+ ltq_etop_w32(val, LTQ_ETOP_MDIO);
+ return 0;
+}
+
+static int
+ltq_etop_mdio_rd(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+ u32 val = MDIO_REQUEST | MDIO_READ |
+ ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+ ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+
+ while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+ ;
+ ltq_etop_w32(val, LTQ_ETOP_MDIO);
+ while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+ ;
+ val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
+ return val;
+}
+
+static void
+ltq_etop_mdio_link(struct net_device *dev)
+{
+ /* nothing to do */
+}
+
+static int
+ltq_etop_mdio_probe(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ if (priv->mii_bus->phy_map[phy_addr]) {
+ phydev = priv->mii_bus->phy_map[phy_addr];
+ break;
+ }
+ }
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+ return -ENODEV;
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev), <q_etop_mdio_link,
+ 0, priv->pldata->mii_mode);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+ dev->name, phydev->drv->name,
+ dev_name(&phydev->dev), phydev->irq);
+
+ return 0;
+}
+
+static int
+ltq_etop_mdio_init(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int i;
+ int err;
+
+ priv->mii_bus = mdiobus_alloc();
+ if (!priv->mii_bus) {
+ netdev_err(dev, "failed to allocate mii bus\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ priv->mii_bus->priv = dev;
+ priv->mii_bus->read = ltq_etop_mdio_rd;
+ priv->mii_bus->write = ltq_etop_mdio_wr;
+ priv->mii_bus->name = "ltq_mii";
+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+ priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!priv->mii_bus->irq) {
+ err = -ENOMEM;
+ goto err_out_free_mdiobus;
+ }
+
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ priv->mii_bus->irq[i] = PHY_POLL;
+
+ if (mdiobus_register(priv->mii_bus)) {
+ err = -ENXIO;
+ goto err_out_free_mdio_irq;
+ }
+
+ if (ltq_etop_mdio_probe(dev)) {
+ err = -ENXIO;
+ goto err_out_unregister_bus;
+ }
+ return 0;
+
+err_out_unregister_bus:
+ mdiobus_unregister(priv->mii_bus);
+err_out_free_mdio_irq:
+ kfree(priv->mii_bus->irq);
+err_out_free_mdiobus:
+ mdiobus_free(priv->mii_bus);
+err_out:
+ return err;
+}
+
+static void
+ltq_etop_mdio_cleanup(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ phy_disconnect(priv->phydev);
+ mdiobus_unregister(priv->mii_bus);
+ kfree(priv->mii_bus->irq);
+ mdiobus_free(priv->mii_bus);
+}
+
+static int
+ltq_etop_open(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+ struct ltq_etop_chan *ch = &priv->ch[i];
+
+ if (!IS_TX(i) && (!IS_RX(i)))
+ continue;
+ ltq_dma_open(&ch->dma);
+ napi_enable(&ch->napi);
+ }
+ phy_start(priv->phydev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+}
+
+static int
+ltq_etop_stop(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int i;
+
+ netif_tx_stop_all_queues(dev);
+ phy_stop(priv->phydev);
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+ struct ltq_etop_chan *ch = &priv->ch[i];
+
+ if (!IS_RX(i) && !IS_TX(i))
+ continue;
+ napi_disable(&ch->napi);
+ ltq_dma_close(&ch->dma);
+ }
+ return 0;
+}
+
+static int
+ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ int queue = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ int len;
+ unsigned long flags;
+ u32 byte_offset;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+ dev_kfree_skb_any(skb);
+ netdev_err(dev, "tx ring full\n");
+ netif_tx_stop_queue(txq);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+ ch->skb[ch->dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+ DMA_TO_DEVICE)) - byte_offset;
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
+ netif_tx_stop_queue(txq);
+
+ return NETDEV_TX_OK;
+}
+
+static int
+ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret = eth_change_mtu(dev, new_mtu);
+
+ if (!ret) {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
+ LTQ_ETOP_IGPLEN);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ return ret;
+}
+
+static int
+ltq_etop_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+ /* TODO: mii-toll reports "No MII transceiver present!." ?!*/
+ return phy_mii_ioctl(priv->phydev, rq, cmd);
+}
+
+static int
+ltq_etop_set_mac_address(struct net_device *dev, void *p)
+{
+ int ret = eth_mac_addr(dev, p);
+
+ if (!ret) {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* store the mac for the unicast filter */
+ spin_lock_irqsave(&priv->lock, flags);
+ ltq_etop_w32(*((u32 *)dev->dev_addr), LTQ_ETOP_MAC_DA0);
+ ltq_etop_w32(*((u16 *)&dev->dev_addr[4]) << 16,
+ LTQ_ETOP_MAC_DA1);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ return ret;
+}
+
+static void
+ltq_etop_set_multicast_list(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* ensure that the unicast filter is not enabled in promiscious mode */
+ spin_lock_irqsave(&priv->lock, flags);
+ if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI))
+ ltq_etop_w32_mask(ETOP_FTCU, 0, LTQ_ETOP_ENETS0);
+ else
+ ltq_etop_w32_mask(0, ETOP_FTCU, LTQ_ETOP_ENETS0);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static u16
+ltq_etop_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ /* we are currently only using the first queue */
+ return 0;
+}
+
+static int
+ltq_etop_init(struct net_device *dev)
+{
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct sockaddr mac;
+ int err;
+
+ ether_setup(dev);
+ dev->watchdog_timeo = 10 * HZ;
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
+ ltq_etop_change_mtu(dev, 1500);
+
+ memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("etop: invalid MAC, using random\n");
+ random_ether_addr(mac.sa_data);
+ }
+
+ err = ltq_etop_set_mac_address(dev, &mac);
+ if (err)
+ goto err_netdev;
+ ltq_etop_set_multicast_list(dev);
+ err = ltq_etop_mdio_init(dev);
+ if (err)
+ goto err_netdev;
+ return 0;
+
+err_netdev:
+ unregister_netdev(dev);
+ free_netdev(dev);
+err_hw:
+ ltq_etop_hw_exit(dev);
+ return err;
+}
+
+static void
+ltq_etop_tx_timeout(struct net_device *dev)
+{
+ int err;
+
+ ltq_etop_hw_exit(dev);
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ return;
+
+err_hw:
+ ltq_etop_hw_exit(dev);
+ netdev_err(dev, "failed to restart etop after TX timeout\n");
+}
+
+static const struct net_device_ops ltq_eth_netdev_ops = {
+ .ndo_open = ltq_etop_open,
+ .ndo_stop = ltq_etop_stop,
+ .ndo_start_xmit = ltq_etop_tx,
+ .ndo_change_mtu = ltq_etop_change_mtu,
+ .ndo_do_ioctl = ltq_etop_ioctl,
+ .ndo_set_mac_address = ltq_etop_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_multicast_list = ltq_etop_set_multicast_list,
+ .ndo_select_queue = ltq_etop_select_queue,
+ .ndo_init = ltq_etop_init,
+ .ndo_tx_timeout = ltq_etop_tx_timeout,
+};
+
+static int __init
+ltq_etop_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+ struct resource *res;
+ int err;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get etop resource\n");
+ err = -ENOENT;
+ goto err_out;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request etop resource\n");
+ err = -EBUSY;
+ goto err_out;
+ }
+
+ ltq_etop_membase = devm_ioremap_nocache(&pdev->dev,
+ res->start, resource_size(res));
+ if (!ltq_etop_membase) {
+ dev_err(&pdev->dev, "failed to remap etop engine %d\n",
+ pdev->id);
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ strcpy(dev->name, "eth%d");
+ dev->netdev_ops = <q_eth_netdev_ops;
+ dev->ethtool_ops = <q_etop_ethtool_ops;
+ priv = netdev_priv(dev);
+ priv->res = res;
+ priv->pldata = dev_get_platdata(&pdev->dev);
+ priv->netdev = dev;
+ spin_lock_init(&priv->lock);
+
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+ if (IS_TX(i))
+ netif_napi_add(dev, &priv->ch[i].napi,
+ ltq_etop_poll_tx, 8);
+ else if (IS_RX(i))
+ netif_napi_add(dev, &priv->ch[i].napi,
+ ltq_etop_poll_rx, 32);
+ priv->ch[i].netdev = dev;
+ }
+
+ err = register_netdev(dev);
+ if (err)
+ goto err_free;
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+err_free:
+ kfree(dev);
+err_out:
+ return err;
+}
+
+static int __devexit
+ltq_etop_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (dev) {
+ netif_tx_stop_all_queues(dev);
+ ltq_etop_hw_exit(dev);
+ ltq_etop_mdio_cleanup(dev);
+ unregister_netdev(dev);
+ }
+ return 0;
+}
+
+static struct platform_driver ltq_mii_driver = {
+ .remove = __devexit_p(ltq_etop_remove),
+ .driver = {
+ .name = "ltq_etop",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init
+init_ltq_etop(void)
+{
+ int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe);
+
+ if (ret)
+ pr_err("ltq_etop: Error registering platfom driver!");
+ return ret;
+}
+
+static void __exit
+exit_ltq_etop(void)
+{
+ platform_driver_unregister(<q_mii_driver);
+}
+
+module_init(init_ltq_etop);
+module_exit(exit_ltq_etop);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC ETOP");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index d70fb76..4ce9e5f 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -174,7 +174,8 @@
| NETIF_F_HIGHDMA
| NETIF_F_LLTX
| NETIF_F_NETNS_LOCAL
- | NETIF_F_VLAN_CHALLENGED;
+ | NETIF_F_VLAN_CHALLENGED
+ | NETIF_F_LOOPBACK;
dev->ethtool_ops = &loopback_ethtool_ops;
dev->header_ops = ð_header_ops;
dev->netdev_ops = &loopback_ops;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 79ccb54..629bd26 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -576,6 +576,11 @@
* add that if/when we get our hands on a full-blown MII PHY.
*/
+ if (status & MACB_BIT(ISR_ROVR)) {
+ /* We missed at least one packet */
+ bp->hw_stats.rx_overruns++;
+ }
+
if (status & MACB_BIT(HRESP)) {
/*
* TODO: Reset the hardware, and maybe move the printk
@@ -1024,7 +1029,8 @@
hwstat->rx_jabbers +
hwstat->rx_undersize_pkts +
hwstat->rx_length_mismatch);
- nstat->rx_over_errors = hwstat->rx_resource_errors;
+ nstat->rx_over_errors = hwstat->rx_resource_errors +
+ hwstat->rx_overruns;
nstat->rx_crc_errors = hwstat->rx_fcs_errors;
nstat->rx_frame_errors = hwstat->rx_align_errors;
nstat->rx_fifo_errors = hwstat->rx_overruns;
@@ -1171,8 +1177,7 @@
}
dev->irq = platform_get_irq(pdev, 0);
- err = request_irq(dev->irq, macb_interrupt, IRQF_SAMPLE_RANDOM,
- dev->name, dev);
+ err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev);
if (err) {
printk(KERN_ERR
"%s: Unable to request IRQ %d (error %d)\n",
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 78e34e9..d72a706 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -70,16 +70,17 @@
hlist_add_head_rcu(&vlan->hlist, &port->vlan_hash[addr[5]]);
}
-static void macvlan_hash_del(struct macvlan_dev *vlan)
+static void macvlan_hash_del(struct macvlan_dev *vlan, bool sync)
{
hlist_del_rcu(&vlan->hlist);
- synchronize_rcu();
+ if (sync)
+ synchronize_rcu();
}
static void macvlan_hash_change_addr(struct macvlan_dev *vlan,
const unsigned char *addr)
{
- macvlan_hash_del(vlan);
+ macvlan_hash_del(vlan, true);
/* Now that we are unhashed it is safe to change the device
* address without confusing packet delivery.
*/
@@ -345,7 +346,7 @@
dev_uc_del(lowerdev, dev->dev_addr);
hash_del:
- macvlan_hash_del(vlan);
+ macvlan_hash_del(vlan, !dev->dismantle);
return 0;
}
@@ -415,7 +416,7 @@
#define MACVLAN_FEATURES \
(NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
NETIF_F_GSO | NETIF_F_TSO | NETIF_F_UFO | NETIF_F_GSO_ROBUST | \
- NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO)
+ NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO | NETIF_F_RXCSUM)
#define MACVLAN_STATE_MASK \
((1<<__LINK_STATE_NOCARRIER) | (1<<__LINK_STATE_DORMANT))
@@ -517,12 +518,6 @@
snprintf(drvinfo->version, 32, "0.1");
}
-static u32 macvlan_ethtool_get_rx_csum(struct net_device *dev)
-{
- const struct macvlan_dev *vlan = netdev_priv(dev);
- return dev_ethtool_get_rx_csum(vlan->lowerdev);
-}
-
static int macvlan_ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
@@ -530,18 +525,10 @@
return dev_ethtool_get_settings(vlan->lowerdev, cmd);
}
-static u32 macvlan_ethtool_get_flags(struct net_device *dev)
-{
- const struct macvlan_dev *vlan = netdev_priv(dev);
- return dev_ethtool_get_flags(vlan->lowerdev);
-}
-
static const struct ethtool_ops macvlan_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_settings = macvlan_ethtool_get_settings,
- .get_rx_csum = macvlan_ethtool_get_rx_csum,
.get_drvinfo = macvlan_ethtool_get_drvinfo,
- .get_flags = macvlan_ethtool_get_flags,
};
static const struct net_device_ops macvlan_netdev_ops = {
@@ -598,26 +585,18 @@
err = netdev_rx_handler_register(dev, macvlan_handle_frame, port);
if (err)
kfree(port);
-
- dev->priv_flags |= IFF_MACVLAN_PORT;
+ else
+ dev->priv_flags |= IFF_MACVLAN_PORT;
return err;
}
-static void macvlan_port_rcu_free(struct rcu_head *head)
-{
- struct macvlan_port *port;
-
- port = container_of(head, struct macvlan_port, rcu);
- kfree(port);
-}
-
static void macvlan_port_destroy(struct net_device *dev)
{
struct macvlan_port *port = macvlan_port_get(dev);
dev->priv_flags &= ~IFF_MACVLAN_PORT;
netdev_rx_handler_unregister(dev);
- call_rcu(&port->rcu, macvlan_port_rcu_free);
+ kfree_rcu(port, rcu);
}
static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
@@ -799,6 +778,7 @@
struct net_device *dev = ptr;
struct macvlan_dev *vlan, *next;
struct macvlan_port *port;
+ LIST_HEAD(list_kill);
if (!macvlan_port_exists(dev))
return NOTIFY_DONE;
@@ -824,7 +804,9 @@
break;
list_for_each_entry_safe(vlan, next, &port->vlans, list)
- vlan->dev->rtnl_link_ops->dellink(vlan->dev, NULL);
+ vlan->dev->rtnl_link_ops->dellink(vlan->dev, &list_kill);
+ unregister_netdevice_many(&list_kill);
+ list_del(&list_kill);
break;
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index e85bf04..16fbb11 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -176,6 +176,9 @@
* @npage_adv: Modes currently advertised on next pages
* @npage_lpa: Modes advertised by link partner on next pages
*
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mdio45_ethtool_gset_npage().
+ *
* Since the CSRs for auto-negotiation using next pages are not fully
* standardised, this function does not attempt to decode them. The
* caller must pass them in.
@@ -185,6 +188,7 @@
u32 npage_adv, u32 npage_lpa)
{
int reg;
+ u32 speed;
ecmd->transceiver = XCVR_INTERNAL;
ecmd->phy_address = mdio->prtad;
@@ -287,33 +291,36 @@
if (modes & (ADVERTISED_10000baseT_Full |
ADVERTISED_10000baseKX4_Full |
ADVERTISED_10000baseKR_Full)) {
- ecmd->speed = SPEED_10000;
+ speed = SPEED_10000;
ecmd->duplex = DUPLEX_FULL;
} else if (modes & (ADVERTISED_1000baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseKX_Full)) {
- ecmd->speed = SPEED_1000;
+ speed = SPEED_1000;
ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
} else if (modes & (ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half)) {
- ecmd->speed = SPEED_100;
+ speed = SPEED_100;
ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
} else {
- ecmd->speed = SPEED_10;
+ speed = SPEED_10;
ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
}
} else {
/* Report forced settings */
reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
MDIO_CTRL1);
- ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
- ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
+ speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1)
+ * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
- ecmd->speed == SPEED_10000);
+ speed == SPEED_10000);
}
+ ethtool_cmd_speed_set(ecmd, speed);
+
/* 10GBASE-T MDI/MDI-X */
- if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
+ if (ecmd->port == PORT_TP
+ && (ethtool_cmd_speed(ecmd) == SPEED_10000)) {
switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
MDIO_PMA_10GBT_SWAPPOL)) {
case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index 0a6c6a2..c62e781 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -49,6 +49,10 @@
result |= ADVERTISED_100baseT_Half;
if (advert & ADVERTISE_100FULL)
result |= ADVERTISED_100baseT_Full;
+ if (advert & ADVERTISE_PAUSE_CAP)
+ result |= ADVERTISED_Pause;
+ if (advert & ADVERTISE_PAUSE_ASYM)
+ result |= ADVERTISED_Asym_Pause;
return result;
}
@@ -58,6 +62,9 @@
* @mii: MII interface
* @ecmd: requested ethtool_cmd
*
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mii_ethtool_gset().
+ *
* Returns 0 for success, negative on error.
*/
int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
@@ -118,22 +125,25 @@
if (nego & (ADVERTISED_1000baseT_Full |
ADVERTISED_1000baseT_Half)) {
- ecmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
} else if (nego & (ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half)) {
- ecmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
} else {
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
}
} else {
ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->speed = ((bmcr & BMCR_SPEED1000 &&
- (bmcr & BMCR_SPEED100) == 0) ? SPEED_1000 :
- (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10);
+ ethtool_cmd_speed_set(ecmd,
+ ((bmcr & BMCR_SPEED1000 &&
+ (bmcr & BMCR_SPEED100) == 0) ?
+ SPEED_1000 :
+ ((bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10)));
ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
}
@@ -154,10 +164,11 @@
int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
{
struct net_device *dev = mii->dev;
+ u32 speed = ethtool_cmd_speed(ecmd);
- if (ecmd->speed != SPEED_10 &&
- ecmd->speed != SPEED_100 &&
- ecmd->speed != SPEED_1000)
+ if (speed != SPEED_10 &&
+ speed != SPEED_100 &&
+ speed != SPEED_1000)
return -EINVAL;
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
return -EINVAL;
@@ -169,7 +180,7 @@
return -EINVAL;
if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
return -EINVAL;
- if ((ecmd->speed == SPEED_1000) && (!mii->supports_gmii))
+ if ((speed == SPEED_1000) && (!mii->supports_gmii))
return -EINVAL;
/* ignore supported, maxtxpkt, maxrxpkt */
@@ -227,9 +238,9 @@
bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
BMCR_SPEED1000 | BMCR_FULLDPLX);
- if (ecmd->speed == SPEED_1000)
+ if (speed == SPEED_1000)
tmp |= BMCR_SPEED1000;
- else if (ecmd->speed == SPEED_100)
+ else if (speed == SPEED_100)
tmp |= BMCR_SPEED100;
if (ecmd->duplex == DUPLEX_FULL) {
tmp |= BMCR_FULLDPLX;
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index d54b7ab..2e858e4 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -57,37 +57,6 @@
drvinfo->eedump_len = 0;
}
-static u32 mlx4_en_get_tso(struct net_device *dev)
-{
- return (dev->features & NETIF_F_TSO) != 0;
-}
-
-static int mlx4_en_set_tso(struct net_device *dev, u32 data)
-{
- struct mlx4_en_priv *priv = netdev_priv(dev);
-
- if (data) {
- if (!priv->mdev->LSO_support)
- return -EPERM;
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
- } else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
- return 0;
-}
-
-static u32 mlx4_en_get_rx_csum(struct net_device *dev)
-{
- struct mlx4_en_priv *priv = netdev_priv(dev);
- return priv->rx_csum;
-}
-
-static int mlx4_en_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct mlx4_en_priv *priv = netdev_priv(dev);
- priv->rx_csum = (data != 0);
- return 0;
-}
-
static const char main_strings[][ETH_GSTRING_LEN] = {
"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
@@ -296,10 +265,10 @@
trans_type = priv->port_state.transciver;
if (netif_carrier_ok(dev)) {
- cmd->speed = priv->port_state.link_speed;
+ ethtool_cmd_speed_set(cmd, priv->port_state.link_speed);
cmd->duplex = DUPLEX_FULL;
} else {
- cmd->speed = -1;
+ ethtool_cmd_speed_set(cmd, -1);
cmd->duplex = -1;
}
@@ -323,7 +292,8 @@
static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
if ((cmd->autoneg == AUTONEG_ENABLE) ||
- (cmd->speed != SPEED_10000) || (cmd->duplex != DUPLEX_FULL))
+ (ethtool_cmd_speed(cmd) != SPEED_10000) ||
+ (cmd->duplex != DUPLEX_FULL))
return -EINVAL;
/* Nothing to change */
@@ -483,17 +453,7 @@
.get_drvinfo = mlx4_en_get_drvinfo,
.get_settings = mlx4_en_get_settings,
.set_settings = mlx4_en_set_settings,
-#ifdef NETIF_F_TSO
- .get_tso = mlx4_en_get_tso,
- .set_tso = mlx4_en_set_tso,
-#endif
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
.get_link = ethtool_op_get_link,
- .get_rx_csum = mlx4_en_get_rx_csum,
- .set_rx_csum = mlx4_en_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
.get_strings = mlx4_en_get_strings,
.get_sset_count = mlx4_en_get_sset_count,
.get_ethtool_stats = mlx4_en_get_ethtool_stats,
@@ -508,7 +468,6 @@
.set_pauseparam = mlx4_en_set_pauseparam,
.get_ringparam = mlx4_en_get_ringparam,
.set_ringparam = mlx4_en_set_ringparam,
- .get_flags = ethtool_op_get_flags,
};
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 77063f9..61850ad 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -1083,7 +1083,6 @@
priv->prof = prof;
priv->port = port;
priv->port_up = false;
- priv->rx_csum = 1;
priv->flags = prof->flags;
priv->tx_ring_num = prof->tx_ring_num;
priv->rx_ring_num = prof->rx_ring_num;
@@ -1141,21 +1140,16 @@
/*
* Set driver features
*/
- dev->features |= NETIF_F_SG;
- dev->vlan_features |= NETIF_F_SG;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- dev->features |= NETIF_F_HIGHDMA;
- dev->features |= NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
- dev->features |= NETIF_F_GRO;
- if (mdev->LSO_support) {
- dev->features |= NETIF_F_TSO;
- dev->features |= NETIF_F_TSO6;
- dev->vlan_features |= NETIF_F_TSO;
- dev->vlan_features |= NETIF_F_TSO6;
- }
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ if (mdev->LSO_support)
+ dev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
+
+ dev->vlan_features = dev->hw_features;
+
+ dev->hw_features |= NETIF_F_RXCSUM;
+ dev->features = dev->hw_features | NETIF_F_HIGHDMA |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
mdev->pndev[port] = dev;
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 62dd21b..277215f 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -584,7 +584,7 @@
ring->bytes += length;
ring->packets++;
- if (likely(priv->rx_csum)) {
+ if (likely(dev->features & NETIF_F_RXCSUM)) {
if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
(cqe->checksum == cpu_to_be16(0xffff))) {
priv->port_stats.rx_chksum_good++;
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index e30f609..0b5150d 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -451,7 +451,6 @@
int registered;
int allocated;
int stride;
- int rx_csum;
u64 mac;
int mac_index;
unsigned max_mtu;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 34425b9..a5d9b1c 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1444,13 +1444,13 @@
cmd->advertising = ADVERTISED_MII;
switch (port_status & PORT_SPEED_MASK) {
case PORT_SPEED_10:
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
break;
case PORT_SPEED_100:
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
break;
case PORT_SPEED_1000:
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
break;
default:
cmd->speed = -1;
@@ -1575,18 +1575,12 @@
return 0;
}
-static u32
-mv643xx_eth_get_rx_csum(struct net_device *dev)
-{
- struct mv643xx_eth_private *mp = netdev_priv(dev);
-
- return !!(rdlp(mp, PORT_CONFIG) & 0x02000000);
-}
static int
-mv643xx_eth_set_rx_csum(struct net_device *dev, u32 rx_csum)
+mv643xx_eth_set_features(struct net_device *dev, u32 features)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
+ u32 rx_csum = features & NETIF_F_RXCSUM;
wrlp(mp, PORT_CONFIG, rx_csum ? 0x02000000 : 0x00000000);
@@ -1634,11 +1628,6 @@
}
}
-static int mv643xx_eth_set_flags(struct net_device *dev, u32 data)
-{
- return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO);
-}
-
static int mv643xx_eth_get_sset_count(struct net_device *dev, int sset)
{
if (sset == ETH_SS_STATS)
@@ -1657,14 +1646,8 @@
.set_coalesce = mv643xx_eth_set_coalesce,
.get_ringparam = mv643xx_eth_get_ringparam,
.set_ringparam = mv643xx_eth_set_ringparam,
- .get_rx_csum = mv643xx_eth_get_rx_csum,
- .set_rx_csum = mv643xx_eth_set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
.get_strings = mv643xx_eth_get_strings,
.get_ethtool_stats = mv643xx_eth_get_ethtool_stats,
- .get_flags = ethtool_op_get_flags,
- .set_flags = mv643xx_eth_set_flags,
.get_sset_count = mv643xx_eth_get_sset_count,
};
@@ -2264,7 +2247,7 @@
* frames to RX queue #0, and include the pseudo-header when
* calculating receive checksums.
*/
- wrlp(mp, PORT_CONFIG, 0x02000000);
+ mv643xx_eth_set_features(mp->dev, mp->dev->features);
/*
* Treat BPDUs as normal multicasts, and disable partition mode.
@@ -2848,6 +2831,7 @@
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = mv643xx_eth_ioctl,
.ndo_change_mtu = mv643xx_eth_change_mtu,
+ .ndo_set_features = mv643xx_eth_set_features,
.ndo_tx_timeout = mv643xx_eth_tx_timeout,
.ndo_get_stats = mv643xx_eth_get_stats,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2930,7 +2914,9 @@
dev->watchdog_timeo = 2 * HZ;
dev->base_addr = 0;
- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_LRO;
+ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
SET_NETDEV_DEV(dev, &pdev->dev);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 1446de5..b1358f7 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -205,7 +205,6 @@
int tx_boundary; /* boundary transmits cannot cross */
int num_slices;
int running; /* running? */
- int csum_flag; /* rx_csums? */
int small_bytes;
int big_bytes;
int max_intr_slots;
@@ -1386,7 +1385,7 @@
skb->protocol = eth_type_trans(skb, dev);
skb_record_rx_queue(skb, ss - &mgp->ss[0]);
- if (mgp->csum_flag) {
+ if (dev->features & NETIF_F_RXCSUM) {
if ((skb->protocol == htons(ETH_P_IP)) ||
(skb->protocol == htons(ETH_P_IPV6))) {
skb->csum = csum;
@@ -1645,7 +1644,7 @@
int i;
cmd->autoneg = AUTONEG_DISABLE;
- cmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(cmd, SPEED_10000);
cmd->duplex = DUPLEX_FULL;
/*
@@ -1757,43 +1756,6 @@
ring->tx_pending = ring->tx_max_pending;
}
-static u32 myri10ge_get_rx_csum(struct net_device *netdev)
-{
- struct myri10ge_priv *mgp = netdev_priv(netdev);
-
- if (mgp->csum_flag)
- return 1;
- else
- return 0;
-}
-
-static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
-{
- struct myri10ge_priv *mgp = netdev_priv(netdev);
- int err = 0;
-
- if (csum_enabled)
- mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
- else {
- netdev->features &= ~NETIF_F_LRO;
- mgp->csum_flag = 0;
-
- }
- return err;
-}
-
-static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
-{
- struct myri10ge_priv *mgp = netdev_priv(netdev);
- u32 flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
-
- if (tso_enabled)
- netdev->features |= flags;
- else
- netdev->features &= ~flags;
- return 0;
-}
-
static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
@@ -1944,11 +1906,6 @@
return mgp->msg_enable;
}
-static int myri10ge_set_flags(struct net_device *netdev, u32 value)
-{
- return ethtool_op_set_flags(netdev, value, ETH_FLAG_LRO);
-}
-
static const struct ethtool_ops myri10ge_ethtool_ops = {
.get_settings = myri10ge_get_settings,
.get_drvinfo = myri10ge_get_drvinfo,
@@ -1957,19 +1914,12 @@
.get_pauseparam = myri10ge_get_pauseparam,
.set_pauseparam = myri10ge_set_pauseparam,
.get_ringparam = myri10ge_get_ringparam,
- .get_rx_csum = myri10ge_get_rx_csum,
- .set_rx_csum = myri10ge_set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = myri10ge_set_tso,
.get_link = ethtool_op_get_link,
.get_strings = myri10ge_get_strings,
.get_sset_count = myri10ge_get_sset_count,
.get_ethtool_stats = myri10ge_get_ethtool_stats,
.set_msglevel = myri10ge_set_msglevel,
.get_msglevel = myri10ge_get_msglevel,
- .get_flags = ethtool_op_get_flags,
- .set_flags = myri10ge_set_flags
};
static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
@@ -3136,6 +3086,14 @@
return 0;
}
+static u32 myri10ge_fix_features(struct net_device *dev, u32 features)
+{
+ if (!(features & NETIF_F_RXCSUM))
+ features &= ~NETIF_F_LRO;
+
+ return features;
+}
+
static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
{
struct myri10ge_priv *mgp = netdev_priv(dev);
@@ -3834,6 +3792,7 @@
.ndo_get_stats = myri10ge_get_stats,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = myri10ge_change_mtu,
+ .ndo_fix_features = myri10ge_fix_features,
.ndo_set_multicast_list = myri10ge_set_multicast_list,
.ndo_set_mac_address = myri10ge_set_mac_address,
};
@@ -3860,7 +3819,6 @@
mgp = netdev_priv(netdev);
mgp->dev = netdev;
mgp->pdev = pdev;
- mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
mgp->pause = myri10ge_flow_control;
mgp->intr_coal_delay = myri10ge_intr_coal_delay;
mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
@@ -3976,11 +3934,11 @@
netdev->netdev_ops = &myri10ge_netdev_ops;
netdev->mtu = myri10ge_initial_mtu;
netdev->base_addr = mgp->iomem_base;
- netdev->features = mgp->features;
+ netdev->hw_features = mgp->features | NETIF_F_LRO | NETIF_F_RXCSUM;
+ netdev->features = netdev->hw_features;
if (dac_enabled)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->features |= NETIF_F_LRO;
netdev->vlan_features |= mgp->features;
if (mgp->fw_ver_tiny < 37)
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 1074231..b78be08 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2820,7 +2820,7 @@
u32 tmp;
ecmd->port = dev->if_port;
- ecmd->speed = np->speed;
+ ethtool_cmd_speed_set(ecmd, np->speed);
ecmd->duplex = np->duplex;
ecmd->autoneg = np->autoneg;
ecmd->advertising = 0;
@@ -2878,9 +2878,9 @@
tmp = mii_nway_result(
np->advertising & mdio_read(dev, MII_LPA));
if (tmp == LPA_100FULL || tmp == LPA_100HALF)
- ecmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
else
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
if (tmp == LPA_100FULL || tmp == LPA_10FULL)
ecmd->duplex = DUPLEX_FULL;
else
@@ -2908,7 +2908,8 @@
return -EINVAL;
}
} else if (ecmd->autoneg == AUTONEG_DISABLE) {
- if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (speed != SPEED_10 && speed != SPEED_100)
return -EINVAL;
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
return -EINVAL;
@@ -2956,7 +2957,7 @@
if (ecmd->advertising & ADVERTISED_100baseT_Full)
np->advertising |= ADVERTISE_100FULL;
} else {
- np->speed = ecmd->speed;
+ np->speed = ethtool_cmd_speed(ecmd);
np->duplex = ecmd->duplex;
/* user overriding the initial full duplex parm? */
if (np->duplex == DUPLEX_HALF)
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c
index 30be8c6..7298a34 100644
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -167,7 +167,7 @@
#ifndef MODULE
struct net_device * __init ne_probe(int unit)
{
- struct net_device *dev = alloc_ei_netdev();
+ struct net_device *dev = ____alloc_ei_netdev(0);
int err;
if (!dev)
@@ -197,15 +197,15 @@
.ndo_open = ne_open,
.ndo_stop = ne_close,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
@@ -637,7 +637,7 @@
int err;
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = alloc_ei_netdev();
+ struct net_device *dev = ____alloc_ei_netdev(0);
if (!dev)
break;
if (io[this_dev]) {
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 243ed2a..e8984b0c 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -80,17 +80,20 @@
#define NE3210_DEBUG 0x0
-static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
-static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0};
-static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"};
-static int ifmap_val[] __initdata = {
+static const unsigned char irq_map[] __devinitconst =
+ { 15, 12, 11, 10, 9, 7, 5, 3 };
+static const unsigned int shmem_map[] __devinitconst =
+ { 0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0 };
+static const char *const ifmap[] __devinitconst =
+ { "UTP", "?", "BNC", "AUI" };
+static const int ifmap_val[] __devinitconst = {
IF_PORT_10BASET,
IF_PORT_UNKNOWN,
IF_PORT_10BASE2,
IF_PORT_AUI,
};
-static int __init ne3210_eisa_probe (struct device *device)
+static int __devinit ne3210_eisa_probe (struct device *device)
{
unsigned long ioaddr, phys_mem;
int i, retval, port_index;
@@ -313,7 +316,7 @@
memcpy_toio(shmem, buf, count);
}
-static struct eisa_device_id ne3210_ids[] = {
+static const struct eisa_device_id ne3210_ids[] __devinitconst = {
{ "EGL0101" },
{ "NVL1801" },
{ "" },
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index dfb67eb..a83e101 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -242,34 +242,6 @@
}
/*
- * Wrapper over simple_strtol (base 10) with sanity and range checking.
- * We return (signed) long only because we may want to return errors.
- * Do not use this to convert numbers that are allowed to be negative.
- */
-static long strtol10_check_range(const char *cp, long min, long max)
-{
- long ret;
- char *p = (char *) cp;
-
- WARN_ON(min < 0);
- WARN_ON(max < min);
-
- ret = simple_strtol(p, &p, 10);
-
- if (*p && (*p != '\n')) {
- printk(KERN_ERR "netconsole: invalid input\n");
- return -EINVAL;
- }
- if ((ret < min) || (ret > max)) {
- printk(KERN_ERR "netconsole: input %ld must be between "
- "%ld and %ld\n", ret, min, max);
- return -EINVAL;
- }
-
- return ret;
-}
-
-/*
* Attribute operations for netconsole_target.
*/
@@ -327,12 +299,14 @@
const char *buf,
size_t count)
{
+ int enabled;
int err;
- long enabled;
- enabled = strtol10_check_range(buf, 0, 1);
- if (enabled < 0)
- return enabled;
+ err = kstrtoint(buf, 10, &enabled);
+ if (err < 0)
+ return err;
+ if (enabled < 0 || enabled > 1)
+ return -EINVAL;
if (enabled) { /* 1 */
@@ -384,8 +358,7 @@
const char *buf,
size_t count)
{
- long local_port;
-#define __U16_MAX ((__u16) ~0U)
+ int rv;
if (nt->enabled) {
printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -394,12 +367,9 @@
return -EINVAL;
}
- local_port = strtol10_check_range(buf, 0, __U16_MAX);
- if (local_port < 0)
- return local_port;
-
- nt->np.local_port = local_port;
-
+ rv = kstrtou16(buf, 10, &nt->np.local_port);
+ if (rv < 0)
+ return rv;
return strnlen(buf, count);
}
@@ -407,8 +377,7 @@
const char *buf,
size_t count)
{
- long remote_port;
-#define __U16_MAX ((__u16) ~0U)
+ int rv;
if (nt->enabled) {
printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -417,12 +386,9 @@
return -EINVAL;
}
- remote_port = strtol10_check_range(buf, 0, __U16_MAX);
- if (remote_port < 0)
- return remote_port;
-
- nt->np.remote_port = remote_port;
-
+ rv = kstrtou16(buf, 10, &nt->np.remote_port);
+ if (rv < 0)
+ return rv;
return strnlen(buf, count);
}
@@ -463,8 +429,6 @@
size_t count)
{
u8 remote_mac[ETH_ALEN];
- char *p = (char *) buf;
- int i;
if (nt->enabled) {
printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -473,23 +437,13 @@
return -EINVAL;
}
- for (i = 0; i < ETH_ALEN - 1; i++) {
- remote_mac[i] = simple_strtoul(p, &p, 16);
- if (*p != ':')
- goto invalid;
- p++;
- }
- remote_mac[ETH_ALEN - 1] = simple_strtoul(p, &p, 16);
- if (*p && (*p != '\n'))
- goto invalid;
-
+ if (!mac_pton(buf, remote_mac))
+ return -EINVAL;
+ if (buf[3 * ETH_ALEN - 1] && buf[3 * ETH_ALEN - 1] != '\n')
+ return -EINVAL;
memcpy(nt->np.remote_mac, remote_mac, ETH_ALEN);
return strnlen(buf, count);
-
-invalid:
- printk(KERN_ERR "netconsole: invalid input\n");
- return -EINVAL;
}
/*
@@ -671,6 +625,7 @@
goto done;
spin_lock_irqsave(&target_list_lock, flags);
+restart:
list_for_each_entry(nt, &target_list, list) {
netconsole_target_get(nt);
if (nt->np.dev == dev) {
@@ -683,9 +638,16 @@
* rtnl_lock already held
*/
if (nt->np.dev) {
+ spin_unlock_irqrestore(
+ &target_list_lock,
+ flags);
__netpoll_cleanup(&nt->np);
+ spin_lock_irqsave(&target_list_lock,
+ flags);
dev_put(nt->np.dev);
nt->np.dev = NULL;
+ netconsole_target_put(nt);
+ goto restart;
}
/* Fall through */
case NETDEV_GOING_DOWN:
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 679dc85..7722068 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1177,7 +1177,7 @@
u8 max_sds_rings;
u8 driver_mismatch;
u8 msix_supported;
- u8 rx_csum;
+ u8 __pad;
u8 pci_using_dac;
u8 portnum;
u8 physical_port;
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 3bdcc80..b34fb74 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -117,7 +117,7 @@
ecmd->port = PORT_TP;
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
ecmd->duplex = adapter->link_duplex;
ecmd->autoneg = adapter->link_autoneg;
@@ -134,7 +134,7 @@
}
if (netif_running(dev) && adapter->has_link_events) {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
ecmd->autoneg = adapter->link_autoneg;
ecmd->duplex = adapter->link_duplex;
goto skip;
@@ -146,10 +146,10 @@
u16 pcifn = adapter->ahw.pci_func;
val = NXRD32(adapter, P3_LINK_SPEED_REG(pcifn));
- ecmd->speed = P3_LINK_SPEED_MHZ *
- P3_LINK_SPEED_VAL(pcifn, val);
+ ethtool_cmd_speed_set(ecmd, P3_LINK_SPEED_MHZ *
+ P3_LINK_SPEED_VAL(pcifn, val));
} else
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
@@ -251,6 +251,7 @@
netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct netxen_adapter *adapter = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(ecmd);
int ret;
if (adapter->ahw.port_type != NETXEN_NIC_GBE)
@@ -259,14 +260,14 @@
if (!(adapter->capabilities & NX_FW_CAPABILITY_GBE_LINK_CFG))
return -EOPNOTSUPP;
- ret = nx_fw_cmd_set_gbe_port(adapter, ecmd->speed, ecmd->duplex,
+ ret = nx_fw_cmd_set_gbe_port(adapter, speed, ecmd->duplex,
ecmd->autoneg);
if (ret == NX_RCODE_NOT_SUPPORTED)
return -EOPNOTSUPP;
else if (ret)
return -EIO;
- adapter->link_speed = ecmd->speed;
+ adapter->link_speed = speed;
adapter->link_duplex = ecmd->duplex;
adapter->link_autoneg = ecmd->autoneg;
@@ -676,62 +677,6 @@
}
}
-static u32 netxen_nic_get_tx_csum(struct net_device *dev)
-{
- return dev->features & NETIF_F_IP_CSUM;
-}
-
-static u32 netxen_nic_get_rx_csum(struct net_device *dev)
-{
- struct netxen_adapter *adapter = netdev_priv(dev);
- return adapter->rx_csum;
-}
-
-static int netxen_nic_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct netxen_adapter *adapter = netdev_priv(dev);
-
- if (data) {
- adapter->rx_csum = data;
- return 0;
- }
-
- if (dev->features & NETIF_F_LRO) {
- if (netxen_config_hw_lro(adapter, NETXEN_NIC_LRO_DISABLED))
- return -EIO;
-
- dev->features &= ~NETIF_F_LRO;
- netxen_send_lro_cleanup(adapter);
- netdev_info(dev, "disabling LRO as rx_csum is off\n");
- }
- adapter->rx_csum = data;
- return 0;
-}
-
-static u32 netxen_nic_get_tso(struct net_device *dev)
-{
- struct netxen_adapter *adapter = netdev_priv(dev);
-
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
- return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
-
- return (dev->features & NETIF_F_TSO) != 0;
-}
-
-static int netxen_nic_set_tso(struct net_device *dev, u32 data)
-{
- if (data) {
- struct netxen_adapter *adapter = netdev_priv(dev);
-
- dev->features |= NETIF_F_TSO;
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
- dev->features |= NETIF_F_TSO6;
- } else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
- return 0;
-}
-
static void
netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
@@ -866,43 +811,6 @@
return 0;
}
-static int netxen_nic_set_flags(struct net_device *netdev, u32 data)
-{
- struct netxen_adapter *adapter = netdev_priv(netdev);
- int hw_lro;
-
- if (ethtool_invalid_flags(netdev, data, ETH_FLAG_LRO))
- return -EINVAL;
-
- if (!(adapter->capabilities & NX_FW_CAPABILITY_HW_LRO))
- return -EINVAL;
-
- if (!adapter->rx_csum) {
- netdev_info(netdev, "rx csum is off, cannot toggle LRO\n");
- return -EINVAL;
- }
-
- if (!!(data & ETH_FLAG_LRO) == !!(netdev->features & NETIF_F_LRO))
- return 0;
-
- if (data & ETH_FLAG_LRO) {
- hw_lro = NETXEN_NIC_LRO_ENABLED;
- netdev->features |= NETIF_F_LRO;
- } else {
- hw_lro = NETXEN_NIC_LRO_DISABLED;
- netdev->features &= ~NETIF_F_LRO;
- }
-
- if (netxen_config_hw_lro(adapter, hw_lro))
- return -EIO;
-
- if ((hw_lro == 0) && netxen_send_lro_cleanup(adapter))
- return -EIO;
-
-
- return 0;
-}
-
const struct ethtool_ops netxen_nic_ethtool_ops = {
.get_settings = netxen_nic_get_settings,
.set_settings = netxen_nic_set_settings,
@@ -916,21 +824,12 @@
.set_ringparam = netxen_nic_set_ringparam,
.get_pauseparam = netxen_nic_get_pauseparam,
.set_pauseparam = netxen_nic_set_pauseparam,
- .get_tx_csum = netxen_nic_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .get_tso = netxen_nic_get_tso,
- .set_tso = netxen_nic_set_tso,
.get_wol = netxen_nic_get_wol,
.set_wol = netxen_nic_set_wol,
.self_test = netxen_nic_diag_test,
.get_strings = netxen_nic_get_strings,
.get_ethtool_stats = netxen_nic_get_ethtool_stats,
.get_sset_count = netxen_get_sset_count,
- .get_rx_csum = netxen_nic_get_rx_csum,
- .set_rx_csum = netxen_nic_set_rx_csum,
.get_coalesce = netxen_get_intr_coalesce,
.set_coalesce = netxen_set_intr_coalesce,
- .get_flags = ethtool_op_get_flags,
- .set_flags = netxen_nic_set_flags,
};
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 731077d..7f99967 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1483,7 +1483,8 @@
if (!skb)
goto no_skb;
- if (likely(adapter->rx_csum && cksum == STATUS_CKSUM_OK)) {
+ if (likely((adapter->netdev->features & NETIF_F_RXCSUM)
+ && cksum == STATUS_CKSUM_OK)) {
adapter->stats.csummed++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index e8a4b66..b644383 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -485,6 +485,37 @@
adapter->set_multi(dev);
}
+static u32 netxen_fix_features(struct net_device *dev, u32 features)
+{
+ if (!(features & NETIF_F_RXCSUM)) {
+ netdev_info(dev, "disabling LRO as RXCSUM is off\n");
+
+ features &= ~NETIF_F_LRO;
+ }
+
+ return features;
+}
+
+static int netxen_set_features(struct net_device *dev, u32 features)
+{
+ struct netxen_adapter *adapter = netdev_priv(dev);
+ int hw_lro;
+
+ if (!((dev->features ^ features) & NETIF_F_LRO))
+ return 0;
+
+ hw_lro = (features & NETIF_F_LRO) ? NETXEN_NIC_LRO_ENABLED
+ : NETXEN_NIC_LRO_DISABLED;
+
+ if (netxen_config_hw_lro(adapter, hw_lro))
+ return -EIO;
+
+ if (!(features & NETIF_F_LRO) && netxen_send_lro_cleanup(adapter))
+ return -EIO;
+
+ return 0;
+}
+
static const struct net_device_ops netxen_netdev_ops = {
.ndo_open = netxen_nic_open,
.ndo_stop = netxen_nic_close,
@@ -495,6 +526,8 @@
.ndo_set_mac_address = netxen_nic_set_mac,
.ndo_change_mtu = netxen_nic_change_mtu,
.ndo_tx_timeout = netxen_tx_timeout,
+ .ndo_fix_features = netxen_fix_features,
+ .ndo_set_features = netxen_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = netxen_nic_poll_controller,
#endif
@@ -905,7 +938,7 @@
struct nx_host_sds_ring *sds_ring;
int err, ring;
- unsigned long flags = IRQF_SAMPLE_RANDOM;
+ unsigned long flags = 0;
struct net_device *netdev = adapter->netdev;
struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
@@ -1196,7 +1229,6 @@
int err = 0;
struct pci_dev *pdev = adapter->pdev;
- adapter->rx_csum = 1;
adapter->mc_enabled = 0;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
adapter->max_mc_count = 38;
@@ -1210,14 +1242,13 @@
SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
- netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
- netdev->features |= (NETIF_F_GRO);
- netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+ NETIF_F_RXCSUM;
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
- netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
- netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
- }
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ netdev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+ netdev->vlan_features |= netdev->hw_features;
if (adapter->pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
@@ -1225,10 +1256,12 @@
}
if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
- netdev->features |= (NETIF_F_HW_VLAN_TX);
+ netdev->hw_features |= NETIF_F_HW_VLAN_TX;
if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
- netdev->features |= NETIF_F_LRO;
+ netdev->hw_features |= NETIF_F_LRO;
+
+ netdev->features |= netdev->hw_features;
netdev->irq = adapter->msix_entries[0].vector;
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 32678b6..cc25bff0 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -1233,7 +1233,7 @@
bmsr = err;
if (bmsr & BMSR_LSTATUS) {
- u16 adv, lpa, common, estat;
+ u16 adv, lpa;
err = mii_read(np, np->phy_addr, MII_ADVERTISE);
if (err < 0)
@@ -1245,12 +1245,9 @@
goto out;
lpa = err;
- common = adv & lpa;
-
err = mii_read(np, np->phy_addr, MII_ESTATUS);
if (err < 0)
goto out;
- estat = err;
link_up = 1;
current_speed = SPEED_1000;
current_duplex = DUPLEX_FULL;
@@ -1650,7 +1647,7 @@
break;
}
- return 0;
+ return err;
}
static int mii_reset(struct niu *np)
@@ -2381,17 +2378,14 @@
struct niu_link_config *lp = &np->link_config;
unsigned long ctrl_reg, test_cfg_reg, pll_cfg, i;
u64 ctrl_val, test_cfg_val, sig, mask, val;
- u64 reset_val;
switch (np->port) {
case 0:
- reset_val = ENET_SERDES_RESET_0;
ctrl_reg = ENET_SERDES_0_CTRL_CFG;
test_cfg_reg = ENET_SERDES_0_TEST_CFG;
pll_cfg = ENET_SERDES_0_PLL_CFG;
break;
case 1:
- reset_val = ENET_SERDES_RESET_1;
ctrl_reg = ENET_SERDES_1_CTRL_CFG;
test_cfg_reg = ENET_SERDES_1_TEST_CFG;
pll_cfg = ENET_SERDES_1_PLL_CFG;
@@ -6071,8 +6065,7 @@
for (i = 0; i < np->num_ldg; i++) {
struct niu_ldg *lp = &np->ldg[i];
- err = request_irq(lp->irq, niu_interrupt,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+ err = request_irq(lp->irq, niu_interrupt, IRQF_SHARED,
np->irq_name[i], lp);
if (err)
goto out_free_irqs;
@@ -6851,7 +6844,7 @@
cmd->supported = lp->supported;
cmd->advertising = lp->active_advertising;
cmd->autoneg = lp->active_autoneg;
- cmd->speed = lp->active_speed;
+ ethtool_cmd_speed_set(cmd, lp->active_speed);
cmd->duplex = lp->active_duplex;
cmd->port = (np->flags & NIU_FLAGS_FIBER) ? PORT_FIBRE : PORT_TP;
cmd->transceiver = (np->flags & NIU_FLAGS_XCVR_SERDES) ?
@@ -6866,7 +6859,7 @@
struct niu_link_config *lp = &np->link_config;
lp->advertising = cmd->advertising;
- lp->speed = cmd->speed;
+ lp->speed = ethtool_cmd_speed(cmd);
lp->duplex = cmd->duplex;
lp->autoneg = cmd->autoneg;
return niu_init_link(np);
@@ -7023,6 +7016,7 @@
case UDP_V4_FLOW:
*class = CLASS_CODE_UDP_IPV4;
break;
+ case AH_ESP_V4_FLOW:
case AH_V4_FLOW:
case ESP_V4_FLOW:
*class = CLASS_CODE_AH_ESP_IPV4;
@@ -7036,6 +7030,7 @@
case UDP_V6_FLOW:
*class = CLASS_CODE_UDP_IPV6;
break;
+ case AH_ESP_V6_FLOW:
case AH_V6_FLOW:
case ESP_V6_FLOW:
*class = CLASS_CODE_AH_ESP_IPV6;
@@ -7889,37 +7884,35 @@
nw64_mac(reg, val);
}
-static int niu_phys_id(struct net_device *dev, u32 data)
+static int niu_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
+
{
struct niu *np = netdev_priv(dev);
- u64 orig_led_state;
- int i;
if (!netif_running(dev))
return -EAGAIN;
- if (data == 0)
- data = 2;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ np->orig_led_state = niu_led_state_save(np);
+ return 1; /* cycle on/off once per second */
- orig_led_state = niu_led_state_save(np);
- for (i = 0; i < (data * 2); i++) {
- int on = ((i % 2) == 0);
+ case ETHTOOL_ID_ON:
+ niu_force_led(np, 1);
+ break;
- niu_force_led(np, on);
+ case ETHTOOL_ID_OFF:
+ niu_force_led(np, 0);
+ break;
- if (msleep_interruptible(500))
- break;
+ case ETHTOOL_ID_INACTIVE:
+ niu_led_state_restore(np, np->orig_led_state);
}
- niu_led_state_restore(np, orig_led_state);
return 0;
}
-static int niu_set_flags(struct net_device *dev, u32 data)
-{
- return ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH);
-}
-
static const struct ethtool_ops niu_ethtool_ops = {
.get_drvinfo = niu_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -7933,11 +7926,9 @@
.get_strings = niu_get_strings,
.get_sset_count = niu_get_sset_count,
.get_ethtool_stats = niu_get_ethtool_stats,
- .phys_id = niu_phys_id,
+ .set_phys_id = niu_set_phys_id,
.get_rxnfc = niu_get_nfc,
.set_rxnfc = niu_set_nfc,
- .set_flags = niu_set_flags,
- .get_flags = ethtool_op_get_flags,
};
static int niu_ldg_assign_ldn(struct niu *np, struct niu_parent *parent,
@@ -8131,7 +8122,7 @@
netif_printk(np, probe, KERN_DEBUG, np->dev,
"VPD_SCAN: start[%x] end[%x]\n", start, end);
while (start < end) {
- int len, err, instance, type, prop_len;
+ int len, err, prop_len;
char namebuf[64];
u8 *prop_buf;
int max_len;
@@ -8147,8 +8138,6 @@
len = err;
start += 3;
- instance = niu_pci_eeprom_read(np, start);
- type = niu_pci_eeprom_read(np, start + 3);
prop_len = niu_pci_eeprom_read(np, start + 4);
err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
if (err < 0)
@@ -9768,8 +9757,8 @@
static void __devinit niu_set_basic_features(struct net_device *dev)
{
- dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM |
- NETIF_F_GRO | NETIF_F_RXHASH);
+ dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_RXHASH;
+ dev->features |= dev->hw_features | NETIF_F_RXCSUM;
}
static int __devinit niu_pci_init_one(struct pci_dev *pdev,
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index a41fa8e..51e177e 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3279,6 +3279,7 @@
unsigned long xpcs_off;
struct timer_list timer;
+ u64 orig_led_state;
const struct niu_phy_ops *phy_ops;
int phy_addr;
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 6667e06..3e4040f 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1251,7 +1251,7 @@
/*
* Here's the list of available ethtool commands from other drivers:
* cmd->advertising =
- * cmd->speed =
+ * ethtool_cmd_speed_set(cmd, ...)
* cmd->duplex =
* cmd->port = 0;
* cmd->phy_address =
@@ -1289,13 +1289,13 @@
cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF;
switch (cfg / CFG_SPDSTS0 & 3) {
case 2:
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
break;
case 1:
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
break;
default:
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
break;
}
cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE)
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index bf126e7..59fac77 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -597,8 +597,6 @@
* @rx_ring: Pointer of Rx descriptor ring structure
* @rx_buffer_len: Receive buffer length
* @tx_queue_len: Transmit queue length
- * @rx_csum: Receive TCP/IP checksum enable/disable
- * @tx_csum: Transmit TCP/IP checksum enable/disable
* @have_msi: PCI MSI mode flag
*/
@@ -623,8 +621,6 @@
struct pch_gbe_rx_ring *rx_ring;
unsigned long rx_buffer_len;
unsigned long tx_queue_len;
- bool rx_csum;
- bool tx_csum;
bool have_msi;
};
diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/pch_gbe/pch_gbe_ethtool.c
index d2174a4..ea2d8e4 100644
--- a/drivers/net/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/pch_gbe/pch_gbe_ethtool.c
@@ -92,7 +92,7 @@
ecmd->advertising &= ~(ADVERTISED_TP | ADVERTISED_1000baseT_Half);
if (!netif_carrier_ok(adapter->netdev))
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
return ret;
}
@@ -109,12 +109,15 @@
{
struct pch_gbe_adapter *adapter = netdev_priv(netdev);
struct pch_gbe_hw *hw = &adapter->hw;
+ u32 speed = ethtool_cmd_speed(ecmd);
int ret;
pch_gbe_hal_write_phy_reg(hw, MII_BMCR, BMCR_RESET);
- if (ecmd->speed == USHRT_MAX) {
- ecmd->speed = SPEED_1000;
+ /* when set_settings() is called with a ethtool_cmd previously
+ * filled by get_settings() on a down link, speed is -1: */
+ if (speed == UINT_MAX) {
+ speed = SPEED_1000;
ecmd->duplex = DUPLEX_FULL;
}
ret = mii_ethtool_sset(&adapter->mii, ecmd);
@@ -122,7 +125,7 @@
pr_err("Error: mii_ethtool_sset\n");
return ret;
}
- hw->mac.link_speed = ecmd->speed;
+ hw->mac.link_speed = speed;
hw->mac.link_duplex = ecmd->duplex;
hw->phy.autoneg_advertised = ecmd->advertising;
hw->mac.autoneg = ecmd->autoneg;
@@ -434,57 +437,6 @@
}
/**
- * pch_gbe_get_rx_csum - Report whether receive checksums are turned on or off
- * @netdev: Network interface device structure
- * Returns
- * true(1): Checksum On
- * false(0): Checksum Off
- */
-static u32 pch_gbe_get_rx_csum(struct net_device *netdev)
-{
- struct pch_gbe_adapter *adapter = netdev_priv(netdev);
-
- return adapter->rx_csum;
-}
-
-/**
- * pch_gbe_set_rx_csum - Turn receive checksum on or off
- * @netdev: Network interface device structure
- * @data: Checksum On[true] or Off[false]
- * Returns
- * 0: Successful.
- * Negative value: Failed.
- */
-static int pch_gbe_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct pch_gbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->rx_csum = data;
- if ((netif_running(netdev)))
- pch_gbe_reinit_locked(adapter);
- else
- pch_gbe_reset(adapter);
-
- return 0;
-}
-
-/**
- * pch_gbe_set_tx_csum - Turn transmit checksums on or off
- * @netdev: Network interface device structure
- * @data: Checksum on[true] or off[false]
- * Returns
- * 0: Successful.
- * Negative value: Failed.
- */
-static int pch_gbe_set_tx_csum(struct net_device *netdev, u32 data)
-{
- struct pch_gbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->tx_csum = data;
- return ethtool_op_set_tx_ipv6_csum(netdev, data);
-}
-
-/**
* pch_gbe_get_strings - Return a set of strings that describe the requested
* objects
* @netdev: Network interface device structure
@@ -554,9 +506,6 @@
.set_ringparam = pch_gbe_set_ringparam,
.get_pauseparam = pch_gbe_get_pauseparam,
.set_pauseparam = pch_gbe_set_pauseparam,
- .get_rx_csum = pch_gbe_get_rx_csum,
- .set_rx_csum = pch_gbe_set_rx_csum,
- .set_tx_csum = pch_gbe_set_tx_csum,
.get_strings = pch_gbe_get_strings,
.get_ethtool_stats = pch_gbe_get_ethtool_stats,
.get_sset_count = pch_gbe_get_sset_count,
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 2ef2f9c..c2476fd 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -34,6 +34,10 @@
#define PCH_GBE_COPYBREAK_DEFAULT 256
#define PCH_GBE_PCI_BAR 1
+/* Macros for ML7223 */
+#define PCI_VENDOR_ID_ROHM 0x10db
+#define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013
+
#define PCH_GBE_TX_WEIGHT 64
#define PCH_GBE_RX_WEIGHT 64
#define PCH_GBE_RX_BUFFER_WRITE 16
@@ -43,8 +47,7 @@
#define PCH_GBE_MAC_RGMII_CTRL_SETTING ( \
PCH_GBE_CHIP_TYPE_INTERNAL | \
- PCH_GBE_RGMII_MODE_RGMII | \
- PCH_GBE_CRS_SEL \
+ PCH_GBE_RGMII_MODE_RGMII \
)
/* Ethertype field values */
@@ -656,6 +659,7 @@
*/
static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
struct pch_gbe_hw *hw = &adapter->hw;
u32 rx_mode, tcpip;
@@ -666,7 +670,7 @@
tcpip = ioread32(&hw->reg->TCPIP_ACC);
- if (adapter->rx_csum) {
+ if (netdev->features & NETIF_F_RXCSUM) {
tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF;
tcpip |= PCH_GBE_RX_TCPIPACC_EN;
} else {
@@ -887,12 +891,12 @@
struct pch_gbe_adapter *adapter = (struct pch_gbe_adapter *)data;
struct net_device *netdev = adapter->netdev;
struct pch_gbe_hw *hw = &adapter->hw;
- struct ethtool_cmd cmd;
pr_debug("right now = %ld\n", jiffies);
pch_gbe_update_stats(adapter);
if ((mii_link_ok(&adapter->mii)) && (!netif_carrier_ok(netdev))) {
+ struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
netdev->tx_queue_len = adapter->tx_queue_len;
/* mii library handles link maintenance tasks */
if (mii_ethtool_gset(&adapter->mii, &cmd)) {
@@ -902,7 +906,7 @@
PCH_GBE_WATCHDOG_PERIOD));
return;
}
- hw->mac.link_speed = cmd.speed;
+ hw->mac.link_speed = ethtool_cmd_speed(&cmd);
hw->mac.link_duplex = cmd.duplex;
/* Set the RGMII control. */
pch_gbe_set_rgmii_ctrl(adapter, hw->mac.link_speed,
@@ -912,7 +916,7 @@
hw->mac.link_duplex);
netdev_dbg(netdev,
"Link is Up %d Mbps %s-Duplex\n",
- cmd.speed,
+ hw->mac.link_speed,
cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
netif_carrier_on(netdev);
netif_wake_queue(netdev);
@@ -950,7 +954,7 @@
frame_ctrl = 0;
if (unlikely(skb->len < PCH_GBE_SHORT_PKT))
frame_ctrl |= PCH_GBE_TXD_CTRL_APAD;
- if (unlikely(!adapter->tx_csum))
+ if (skb->ip_summed == CHECKSUM_NONE)
frame_ctrl |= PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF;
/* Performs checksum processing */
@@ -958,7 +962,7 @@
* It is because the hardware accelerator does not support a checksum,
* when the received data size is less than 64 bytes.
*/
- if ((skb->len < PCH_GBE_SHORT_PKT) && (adapter->tx_csum)) {
+ if (skb->len < PCH_GBE_SHORT_PKT && skb->ip_summed != CHECKSUM_NONE) {
frame_ctrl |= PCH_GBE_TXD_CTRL_APAD |
PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF;
if (skb->protocol == htons(ETH_P_IP)) {
@@ -1426,7 +1430,7 @@
length = (rx_desc->rx_words_eob) - 3;
/* Decide the data conversion method */
- if (!adapter->rx_csum) {
+ if (!(netdev->features & NETIF_F_RXCSUM)) {
/* [Header:14][payload] */
if (NET_IP_ALIGN) {
/* Because alignment differs,
@@ -1494,12 +1498,11 @@
/* Write meta date of skb */
skb_put(skb, length);
skb->protocol = eth_type_trans(skb, netdev);
- if ((tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK) ==
- PCH_GBE_RXD_ACC_STAT_TCPIPOK) {
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
+ if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
skb->ip_summed = CHECKSUM_NONE;
- }
+ else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
napi_gro_receive(&adapter->napi, skb);
(*work_done)++;
pr_debug("Receive skb->ip_summed: %d length: %d\n",
@@ -2030,6 +2033,29 @@
}
/**
+ * pch_gbe_set_features - Reset device after features changed
+ * @netdev: Network interface device structure
+ * @features: New features
+ * Returns
+ * 0: HW state updated successfully
+ */
+static int pch_gbe_set_features(struct net_device *netdev, u32 features)
+{
+ struct pch_gbe_adapter *adapter = netdev_priv(netdev);
+ u32 changed = features ^ netdev->features;
+
+ if (!(changed & NETIF_F_RXCSUM))
+ return 0;
+
+ if (netif_running(netdev))
+ pch_gbe_reinit_locked(adapter);
+ else
+ pch_gbe_reset(adapter);
+
+ return 0;
+}
+
+/**
* pch_gbe_ioctl - Controls register through a MII interface
* @netdev: Network interface device structure
* @ifr: Pointer to ifr structure
@@ -2129,6 +2155,7 @@
.ndo_set_mac_address = pch_gbe_set_mac,
.ndo_tx_timeout = pch_gbe_tx_timeout,
.ndo_change_mtu = pch_gbe_change_mtu,
+ .ndo_set_features = pch_gbe_set_features,
.ndo_do_ioctl = pch_gbe_ioctl,
.ndo_set_multicast_list = &pch_gbe_set_multi,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2334,7 +2361,9 @@
netdev->watchdog_timeo = PCH_GBE_WATCHDOG_PERIOD;
netif_napi_add(netdev, &adapter->napi,
pch_gbe_napi_poll, PCH_GBE_RX_WEIGHT);
- netdev->features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO;
+ netdev->hw_features = NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ netdev->features = netdev->hw_features;
pch_gbe_set_ethtool_ops(netdev);
pch_gbe_mac_load_mac_addr(&adapter->hw);
@@ -2373,11 +2402,6 @@
pch_gbe_check_options(adapter);
- if (adapter->tx_csum)
- netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
- else
- netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-
/* initialize the wol settings based on the eeprom settings */
adapter->wake_up_evt = PCH_GBE_WL_INIT_SETTING;
dev_info(&pdev->dev, "MAC address : %pM\n", netdev->dev_addr);
@@ -2420,6 +2444,13 @@
.class = (PCI_CLASS_NETWORK_ETHERNET << 8),
.class_mask = (0xFFFF00)
},
+ {.vendor = PCI_VENDOR_ID_ROHM,
+ .device = PCI_DEVICE_ID_ROHM_ML7223_GBE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
+ .class_mask = (0xFFFF00)
+ },
/* required last entry */
{0}
};
diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/pch_gbe/pch_gbe_param.c
index ef0996a..5b5d90a 100644
--- a/drivers/net/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/pch_gbe/pch_gbe_param.c
@@ -426,6 +426,8 @@
void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
{
struct pch_gbe_hw *hw = &adapter->hw;
+ struct net_device *dev = adapter->netdev;
+ int val;
{ /* Transmit Descriptor Count */
static const struct pch_gbe_option opt = {
@@ -466,9 +468,10 @@
.err = "defaulting to Enabled",
.def = PCH_GBE_DEFAULT_RX_CSUM
};
- adapter->rx_csum = XsumRX;
- pch_gbe_validate_option((int *)(&adapter->rx_csum),
- &opt, adapter);
+ val = XsumRX;
+ pch_gbe_validate_option(&val, &opt, adapter);
+ if (!val)
+ dev->features &= ~NETIF_F_RXCSUM;
}
{ /* Checksum Offload Enable/Disable */
static const struct pch_gbe_option opt = {
@@ -477,9 +480,10 @@
.err = "defaulting to Enabled",
.def = PCH_GBE_DEFAULT_TX_CSUM
};
- adapter->tx_csum = XsumTX;
- pch_gbe_validate_option((int *)(&adapter->tx_csum),
- &opt, adapter);
+ val = XsumTX;
+ pch_gbe_validate_option(&val, &opt, adapter);
+ if (!val)
+ dev->features &= ~NETIF_F_ALL_CSUM;
}
{ /* Flow Control */
static const struct pch_gbe_option opt = {
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.c b/drivers/net/pch_gbe/pch_gbe_phy.c
index 923a687..28bb960 100644
--- a/drivers/net/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/pch_gbe/pch_gbe_phy.c
@@ -247,7 +247,7 @@
void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
{
struct pch_gbe_adapter *adapter;
- struct ethtool_cmd cmd;
+ struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
int ret;
u16 mii_reg;
@@ -256,7 +256,7 @@
if (ret)
pr_err("Error: mii_ethtool_gset\n");
- cmd.speed = hw->mac.link_speed;
+ ethtool_cmd_speed_set(&cmd, hw->mac.link_speed);
cmd.duplex = hw->mac.link_duplex;
cmd.advertising = hw->phy.autoneg_advertised;
cmd.autoneg = hw->mac.autoneg;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 1085917..288e4f1 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1860,7 +1860,7 @@
tmp = inw(ioaddr + CONFIG);
ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
- ecmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
ecmd->phy_address = ioaddr + MGMT;
SMC_SELECT_BANK(0);
@@ -1875,8 +1875,8 @@
u16 tmp;
unsigned int ioaddr = dev->base_addr;
- if (ecmd->speed != SPEED_10)
- return -EINVAL;
+ if (ethtool_cmd_speed(ecmd) != SPEED_10)
+ return -EINVAL;
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
return -EINVAL;
if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI)
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 7680376..b48aba9 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -295,12 +295,14 @@
struct net_device *next;
struct mii_if_info mii_if;
struct timer_list watchdog_timer;
- struct timer_list blink_timer;
u32 msg_enable; /* debug message level */
/* each bit indicates an available PHY */
u32 phymask;
unsigned short chip_version; /* which variant this is */
+
+ /* saved registers during ethtool blink */
+ u16 save_regs[4];
};
static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *);
@@ -324,8 +326,6 @@
static void pcnet32_ethtool_test(struct net_device *dev,
struct ethtool_test *eth_test, u64 * data);
static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1);
-static int pcnet32_phys_id(struct net_device *dev, u32 data);
-static void pcnet32_led_blink_callback(struct net_device *dev);
static int pcnet32_get_regs_len(struct net_device *dev);
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
@@ -1022,7 +1022,8 @@
return rc;
} /* end pcnet32_loopback_test */
-static void pcnet32_led_blink_callback(struct net_device *dev)
+static int pcnet32_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct pcnet32_private *lp = netdev_priv(dev);
struct pcnet32_access *a = &lp->a;
@@ -1030,50 +1031,31 @@
unsigned long flags;
int i;
- spin_lock_irqsave(&lp->lock, flags);
- for (i = 4; i < 8; i++)
- a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
- spin_unlock_irqrestore(&lp->lock, flags);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ /* Save the current value of the bcrs */
+ spin_lock_irqsave(&lp->lock, flags);
+ for (i = 4; i < 8; i++)
+ lp->save_regs[i - 4] = a->read_bcr(ioaddr, i);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 2; /* cycle on/off twice per second */
- mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT);
-}
+ case ETHTOOL_ID_ON:
+ case ETHTOOL_ID_OFF:
+ /* Blink the led */
+ spin_lock_irqsave(&lp->lock, flags);
+ for (i = 4; i < 8; i++)
+ a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ break;
-static int pcnet32_phys_id(struct net_device *dev, u32 data)
-{
- struct pcnet32_private *lp = netdev_priv(dev);
- struct pcnet32_access *a = &lp->a;
- ulong ioaddr = dev->base_addr;
- unsigned long flags;
- int i, regs[4];
-
- if (!lp->blink_timer.function) {
- init_timer(&lp->blink_timer);
- lp->blink_timer.function = (void *)pcnet32_led_blink_callback;
- lp->blink_timer.data = (unsigned long)dev;
+ case ETHTOOL_ID_INACTIVE:
+ /* Restore the original value of the bcrs */
+ spin_lock_irqsave(&lp->lock, flags);
+ for (i = 4; i < 8; i++)
+ a->write_bcr(ioaddr, i, lp->save_regs[i - 4]);
+ spin_unlock_irqrestore(&lp->lock, flags);
}
-
- /* Save the current value of the bcrs */
- spin_lock_irqsave(&lp->lock, flags);
- for (i = 4; i < 8; i++)
- regs[i - 4] = a->read_bcr(ioaddr, i);
- spin_unlock_irqrestore(&lp->lock, flags);
-
- mod_timer(&lp->blink_timer, jiffies);
- set_current_state(TASK_INTERRUPTIBLE);
-
- /* AV: the limit here makes no sense whatsoever */
- if ((!data) || (data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)))
- data = (u32) (MAX_SCHEDULE_TIMEOUT / HZ);
-
- msleep_interruptible(data * 1000);
- del_timer_sync(&lp->blink_timer);
-
- /* Restore the original value of the bcrs */
- spin_lock_irqsave(&lp->lock, flags);
- for (i = 4; i < 8; i++)
- a->write_bcr(ioaddr, i, regs[i - 4]);
- spin_unlock_irqrestore(&lp->lock, flags);
-
return 0;
}
@@ -1450,7 +1432,7 @@
.set_ringparam = pcnet32_set_ringparam,
.get_strings = pcnet32_get_strings,
.self_test = pcnet32_ethtool_test,
- .phys_id = pcnet32_phys_id,
+ .set_phys_id = pcnet32_set_phys_id,
.get_regs_len = pcnet32_get_regs_len,
.get_regs = pcnet32_get_regs,
.get_sset_count = pcnet32_get_sset_count,
@@ -2117,7 +2099,7 @@
int first_phy = -1;
u16 bmcr;
u32 bcr9;
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
/*
* There is really no good other way to handle multiple PHYs
@@ -2133,9 +2115,9 @@
ecmd.port = PORT_MII;
ecmd.transceiver = XCVR_INTERNAL;
ecmd.autoneg = AUTONEG_DISABLE;
- ecmd.speed =
- lp->
- options & PCNET32_PORT_100 ? SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(&ecmd,
+ (lp->options & PCNET32_PORT_100) ?
+ SPEED_100 : SPEED_10);
bcr9 = lp->a.read_bcr(ioaddr, 9);
if (lp->options & PCNET32_PORT_FD) {
@@ -2781,11 +2763,11 @@
netif_carrier_on(dev);
if (lp->mii) {
if (netif_msg_link(lp)) {
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = {
+ .cmd = ETHTOOL_GSET };
mii_ethtool_gset(&lp->mii_if, &ecmd);
- netdev_info(dev, "link up, %sMbps, %s-duplex\n",
- (ecmd.speed == SPEED_100)
- ? "100" : "10",
+ netdev_info(dev, "link up, %uMbps, %s-duplex\n",
+ ethtool_cmd_speed(&ecmd),
(ecmd.duplex == DUPLEX_FULL)
? "full" : "half");
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f767033..a475957 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -238,6 +238,8 @@
*/
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
{
+ u32 speed = ethtool_cmd_speed(cmd);
+
if (cmd->phy_address != phydev->addr)
return -EINVAL;
@@ -253,16 +255,16 @@
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE &&
- ((cmd->speed != SPEED_1000 &&
- cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10) ||
+ ((speed != SPEED_1000 &&
+ speed != SPEED_100 &&
+ speed != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)))
return -EINVAL;
phydev->autoneg = cmd->autoneg;
- phydev->speed = cmd->speed;
+ phydev->speed = speed;
phydev->advertising = cmd->advertising;
@@ -286,7 +288,7 @@
cmd->advertising = phydev->advertising;
- cmd->speed = phydev->speed;
+ ethtool_cmd_speed_set(cmd, phydev->speed);
cmd->duplex = phydev->duplex;
cmd->port = PORT_MII;
cmd->phy_address = phydev->addr;
diff --git a/drivers/net/pptp.c b/drivers/net/pptp.c
index 51dfcf8..1286fe2 100644
--- a/drivers/net/pptp.c
+++ b/drivers/net/pptp.c
@@ -175,6 +175,7 @@
struct pptp_opt *opt = &po->proto.pptp;
struct pptp_gre_header *hdr;
unsigned int header_len = sizeof(*hdr);
+ struct flowi4 fl4;
int islcp;
int len;
unsigned char *data;
@@ -189,7 +190,7 @@
if (sk_pppox(po)->sk_state & PPPOX_DEAD)
goto tx_error;
- rt = ip_route_output_ports(&init_net, NULL,
+ rt = ip_route_output_ports(&init_net, &fl4, NULL,
opt->dst_addr.sin_addr.s_addr,
opt->src_addr.sin_addr.s_addr,
0, 0, IPPROTO_GRE,
@@ -270,8 +271,8 @@
iph->frag_off = 0;
iph->protocol = IPPROTO_GRE;
iph->tos = 0;
- iph->daddr = rt->rt_dst;
- iph->saddr = rt->rt_src;
+ iph->daddr = fl4.daddr;
+ iph->saddr = fl4.saddr;
iph->ttl = ip4_dst_hoplimit(&rt->dst);
iph->tot_len = htons(skb->len);
@@ -434,6 +435,7 @@
struct pppox_sock *po = pppox_sk(sk);
struct pptp_opt *opt = &po->proto.pptp;
struct rtable *rt;
+ struct flowi4 fl4;
int error = 0;
if (sp->sa_protocol != PX_PROTO_PPTP)
@@ -463,7 +465,7 @@
po->chan.private = sk;
po->chan.ops = &pptp_chan_ops;
- rt = ip_route_output_ports(&init_net, sk,
+ rt = ip_route_output_ports(&init_net, &fl4, sk,
opt->dst_addr.sin_addr.s_addr,
opt->src_addr.sin_addr.s_addr,
0, 0,
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index ffdf734..b1f251d 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -951,7 +951,7 @@
skb->protocol = eth_type_trans(skb, netdev);
/* checksum offload */
- if (card->rx_csum) {
+ if (netdev->features & NETIF_F_RXCSUM) {
if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
(!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -1243,17 +1243,17 @@
switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
case GELIC_LV1_ETHER_SPEED_10:
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
break;
case GELIC_LV1_ETHER_SPEED_100:
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
break;
case GELIC_LV1_ETHER_SPEED_1000:
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
break;
default:
pr_info("%s: speed unknown\n", __func__);
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
break;
}
@@ -1312,21 +1312,6 @@
return 0;
}
-u32 gelic_net_get_rx_csum(struct net_device *netdev)
-{
- struct gelic_card *card = netdev_card(netdev);
-
- return card->rx_csum;
-}
-
-int gelic_net_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct gelic_card *card = netdev_card(netdev);
-
- card->rx_csum = data;
- return 0;
-}
-
static void gelic_net_get_wol(struct net_device *netdev,
struct ethtool_wolinfo *wol)
{
@@ -1411,10 +1396,6 @@
.get_settings = gelic_ether_get_settings,
.set_settings = gelic_ether_set_settings,
.get_link = ethtool_op_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_rx_csum = gelic_net_get_rx_csum,
- .set_rx_csum = gelic_net_set_rx_csum,
.get_wol = gelic_net_get_wol,
.set_wol = gelic_net_set_wol,
};
@@ -1512,7 +1493,11 @@
int status;
u64 v1, v2;
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
netdev->features = NETIF_F_IP_CSUM;
+ if (GELIC_CARD_RX_CSUM_DEFAULT)
+ netdev->features |= NETIF_F_RXCSUM;
status = lv1_net_control(bus_id(card), dev_id(card),
GELIC_LV1_GET_MAC_ADDRESS,
@@ -1756,7 +1741,6 @@
/* setup card structure */
card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
GELIC_CARD_PORT_STATUS_CHANGED;
- card->rx_csum = GELIC_CARD_RX_CSUM_DEFAULT;
if (gelic_card_init_chain(card, &card->tx_chain,
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index fadadf9..d9a55b9 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -290,7 +290,6 @@
struct gelic_descr_chain tx_chain;
struct gelic_descr_chain rx_chain;
int rx_dma_restart_required;
- int rx_csum;
/*
* tx_lock guards tx descriptor list and
* tx_dma_progress.
@@ -377,8 +376,6 @@
/* shared ethtool ops */
extern void gelic_net_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *info);
-extern u32 gelic_net_get_rx_csum(struct net_device *netdev);
-extern int gelic_net_set_rx_csum(struct net_device *netdev, u32 data);
extern void gelic_net_poll_controller(struct net_device *netdev);
#endif /* _GELIC_NET_H */
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index b5ae29d..2e62938 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2581,10 +2581,6 @@
static const struct ethtool_ops gelic_wl_ethtool_ops = {
.get_drvinfo = gelic_net_get_drvinfo,
.get_link = gelic_wl_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_rx_csum = gelic_net_get_rx_csum,
- .set_rx_csum = gelic_net_set_rx_csum,
};
static void __devinit gelic_wl_setup_netdev_ops(struct net_device *netdev)
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 348b4f1..d495a68 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1725,7 +1725,7 @@
}
ecmd->advertising = ql_supported_modes(qdev);
ecmd->autoneg = ql_get_auto_cfg_status(qdev);
- ecmd->speed = ql_get_speed(qdev);
+ ethtool_cmd_speed_set(ecmd, ql_get_speed(qdev));
ecmd->duplex = ql_get_full_dup(qdev);
return 0;
}
@@ -3468,7 +3468,7 @@
{
struct net_device *ndev = qdev->ndev;
int err;
- unsigned long irq_flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
+ unsigned long irq_flags = IRQF_SHARED;
unsigned long hw_flags;
if (ql_alloc_mem_resources(qdev)) {
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index b0dead0..480ef5c 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -29,13 +29,15 @@
#include <linux/io.h>
#include <asm/byteorder.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
#include "qlcnic_hdr.h"
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 15
-#define QLCNIC_LINUX_VERSIONID "5.0.15"
+#define _QLCNIC_LINUX_SUBVERSION 18
+#define QLCNIC_LINUX_VERSIONID "5.0.18"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -93,8 +95,6 @@
#define TX_IP_PKT 0x04
#define TX_TCP_LSO 0x05
#define TX_TCP_LSO6 0x06
-#define TX_IPSEC 0x07
-#define TX_IPSEC_CMD 0x0a
#define TX_TCPV6_PKT 0x0b
#define TX_UDPV6_PKT 0x0c
@@ -118,7 +118,6 @@
#define PHAN_PEG_RCV_INITIALIZED 0xff01
#define NUM_RCV_DESC_RINGS 3
-#define NUM_STS_DESC_RINGS 4
#define RCV_RING_NORMAL 0
#define RCV_RING_JUMBO 1
@@ -201,7 +200,7 @@
__le16 reserved;
__le32 buffer_length; /* allocated buffer length (usually 2K) */
__le64 addr_buffer;
-};
+} __packed;
/* opcode field in status_desc */
#define QLCNIC_SYN_OFFLOAD 0x03
@@ -293,6 +292,7 @@
/* Flash Defines and Structures */
#define QLCNIC_FLT_LOCATION 0x3F1000
#define QLCNIC_FW_IMAGE_REGION 0x74
+#define QLCNIC_BOOTLD_REGION 0X72
struct qlcnic_flt_header {
u16 version;
u16 len;
@@ -307,7 +307,7 @@
u8 reserved1;
u32 size;
u32 start_addr;
- u32 end_add;
+ u32 end_addr;
};
/* Magic number to let user know flash is programmed */
@@ -366,12 +366,6 @@
u64 length;
};
-struct qlcnic_recv_crb {
- u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
- u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
- u32 sw_int_mask[NUM_STS_DESC_RINGS];
-};
-
/* Following defines are for the state of the buffers */
#define QLCNIC_BUFFER_FREE 0
#define QLCNIC_BUFFER_BUSY 1
@@ -388,10 +382,10 @@
/* In rx_buffer, we do not need multiple fragments as is a single buffer */
struct qlcnic_rx_buffer {
- struct list_head list;
- struct sk_buff *skb;
- u64 dma;
u16 ref_handle;
+ struct sk_buff *skb;
+ struct list_head list;
+ u64 dma;
};
/* Board types */
@@ -399,6 +393,48 @@
#define QLCNIC_XGBE 0x02
/*
+ * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
+ * adjusted based on configured MTU.
+ */
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US 3
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS 256
+
+#define QLCNIC_INTR_DEFAULT 0x04
+#define QLCNIC_CONFIG_INTR_COALESCE 3
+
+struct qlcnic_nic_intr_coalesce {
+ u8 type;
+ u8 sts_ring_mask;
+ u16 rx_packets;
+ u16 rx_time_us;
+ u16 flag;
+ u32 timer_out;
+};
+
+struct qlcnic_dump_template_hdr {
+ __le32 type;
+ __le32 offset;
+ __le32 size;
+ __le32 cap_mask;
+ __le32 num_entries;
+ __le32 version;
+ __le32 timestamp;
+ __le32 checksum;
+ __le32 drv_cap_mask;
+ __le32 sys_info[3];
+ __le32 saved_state[16];
+ __le32 cap_sizes[8];
+ __le32 rsvd[0];
+};
+
+struct qlcnic_fw_dump {
+ u8 clr; /* flag to indicate if dump is cleared */
+ u32 size; /* total size of the dump */
+ void *data; /* dump data area */
+ struct qlcnic_dump_template_hdr *tmpl_hdr;
+};
+
+/*
* One hardware_context{} per adapter
* contains interrupt info as well shared hardware info.
*/
@@ -416,6 +452,9 @@
u8 linkup;
u16 port_type;
u16 board_type;
+
+ struct qlcnic_nic_intr_coalesce coal;
+ struct qlcnic_fw_dump fw_dump;
};
struct qlcnic_adapter_stats {
@@ -443,50 +482,49 @@
* be one Rcv Descriptor for normal packets, one for jumbo and may be others.
*/
struct qlcnic_host_rds_ring {
- u32 producer;
- u32 num_desc;
- u32 dma_size;
- u32 skb_size;
- u32 flags;
void __iomem *crb_rcv_producer;
struct rcv_desc *desc_head;
struct qlcnic_rx_buffer *rx_buf_arr;
+ u32 num_desc;
+ u32 producer;
+ u32 dma_size;
+ u32 skb_size;
+ u32 flags;
struct list_head free_list;
spinlock_t lock;
dma_addr_t phys_addr;
-};
+} ____cacheline_internodealigned_in_smp;
struct qlcnic_host_sds_ring {
u32 consumer;
u32 num_desc;
void __iomem *crb_sts_consumer;
- void __iomem *crb_intr_mask;
struct status_desc *desc_head;
struct qlcnic_adapter *adapter;
struct napi_struct napi;
struct list_head free_list[NUM_RCV_DESC_RINGS];
+ void __iomem *crb_intr_mask;
int irq;
dma_addr_t phys_addr;
char name[IFNAMSIZ+4];
-};
+} ____cacheline_internodealigned_in_smp;
struct qlcnic_host_tx_ring {
u32 producer;
- __le32 *hw_consumer;
u32 sw_consumer;
- void __iomem *crb_cmd_producer;
u32 num_desc;
-
- struct netdev_queue *txq;
-
- struct qlcnic_cmd_buffer *cmd_buf_arr;
+ void __iomem *crb_cmd_producer;
struct cmd_desc_type0 *desc_head;
+ struct qlcnic_cmd_buffer *cmd_buf_arr;
+ __le32 *hw_consumer;
+
dma_addr_t phys_addr;
dma_addr_t hw_cons_phys_addr;
-};
+ struct netdev_queue *txq;
+} ____cacheline_internodealigned_in_smp;
/*
* Receive context. There is one such structure per instance of the
@@ -495,12 +533,12 @@
* present elsewhere.
*/
struct qlcnic_recv_context {
+ struct qlcnic_host_rds_ring *rds_rings;
+ struct qlcnic_host_sds_ring *sds_rings;
u32 state;
u16 context_id;
u16 virt_port;
- struct qlcnic_host_rds_ring *rds_rings;
- struct qlcnic_host_sds_ring *sds_rings;
};
/* HW context creation */
@@ -539,9 +577,6 @@
#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX 0x00000008
#define QLCNIC_CDRP_CMD_CREATE_TX_CTX 0x00000009
#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX 0x0000000a
-#define QLCNIC_CDRP_CMD_SETUP_STATISTICS 0x0000000e
-#define QLCNIC_CDRP_CMD_GET_STATISTICS 0x0000000f
-#define QLCNIC_CDRP_CMD_DELETE_STATISTICS 0x00000010
#define QLCNIC_CDRP_CMD_SET_MTU 0x00000012
#define QLCNIC_CDRP_CMD_READ_PHY 0x00000013
#define QLCNIC_CDRP_CMD_WRITE_PHY 0x00000014
@@ -550,17 +585,11 @@
#define QLCNIC_CDRP_CMD_SET_FLOW_CTL 0x00000017
#define QLCNIC_CDRP_CMD_READ_MAX_MTU 0x00000018
#define QLCNIC_CDRP_CMD_READ_MAX_LRO 0x00000019
-#define QLCNIC_CDRP_CMD_CONFIGURE_TOE 0x0000001a
-#define QLCNIC_CDRP_CMD_FUNC_ATTRIB 0x0000001b
-#define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS 0x0000001c
-#define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES 0x0000001d
-#define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD 0x0000001e
#define QLCNIC_CDRP_CMD_MAC_ADDRESS 0x0000001f
#define QLCNIC_CDRP_CMD_GET_PCI_INFO 0x00000020
#define QLCNIC_CDRP_CMD_GET_NIC_INFO 0x00000021
#define QLCNIC_CDRP_CMD_SET_NIC_INFO 0x00000022
-#define QLCNIC_CDRP_CMD_RESET_NPAR 0x00000023
#define QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY 0x00000024
#define QLCNIC_CDRP_CMD_TOGGLE_ESWITCH 0x00000025
#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS 0x00000026
@@ -568,8 +597,12 @@
#define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH 0x00000028
#define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG 0x00000029
#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS 0x0000002a
+#define QLCNIC_CDRP_CMD_CONFIG_PORT 0x0000002E
+#define QLCNIC_CDRP_CMD_TEMP_SIZE 0x0000002f
+#define QLCNIC_CDRP_CMD_GET_TEMP_HDR 0x00000030
#define QLCNIC_RCODE_SUCCESS 0
+#define QLCNIC_RCODE_NOT_SUPPORTED 9
#define QLCNIC_RCODE_TIMEOUT 17
#define QLCNIC_DESTROY_CTX_RESET 0
@@ -598,14 +631,14 @@
__le32 ring_size; /* Ring entries */
__le16 msi_index;
__le16 rsvd; /* Padding */
-};
+} __packed;
struct qlcnic_hostrq_rds_ring {
__le64 host_phys_addr; /* Ring base addr */
__le64 buff_size; /* Packet buffer size */
__le32 ring_size; /* Ring entries */
__le32 ring_kind; /* Class of ring */
-};
+} __packed;
struct qlcnic_hostrq_rx_ctx {
__le64 host_rsp_dma_addr; /* Response dma'd here */
@@ -626,17 +659,17 @@
- N hostrq_rds_rings
- N hostrq_sds_rings */
char data[0];
-};
+} __packed;
struct qlcnic_cardrsp_rds_ring{
__le32 host_producer_crb; /* Crb to use */
__le32 rsvd1; /* Padding */
-};
+} __packed;
struct qlcnic_cardrsp_sds_ring {
__le32 host_consumer_crb; /* Crb to use */
__le32 interrupt_crb; /* Crb to use */
-};
+} __packed;
struct qlcnic_cardrsp_rx_ctx {
/* These ring offsets are relative to data[0] below */
@@ -655,7 +688,7 @@
- N cardrsp_rds_rings
- N cardrs_sds_rings */
char data[0];
-};
+} __packed;
#define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings) \
(sizeof(HOSTRQ_RX) + \
@@ -675,7 +708,7 @@
__le64 host_phys_addr; /* Ring base addr */
__le32 ring_size; /* Ring entries */
__le32 rsvd; /* Padding */
-};
+} __packed;
struct qlcnic_hostrq_tx_ctx {
__le64 host_rsp_dma_addr; /* Response dma'd here */
@@ -690,12 +723,12 @@
__le16 rsvd3; /* Padding */
struct qlcnic_hostrq_cds_ring cds_ring; /* Desc of cds ring */
u8 reserved[128]; /* future expansion */
-};
+} __packed;
struct qlcnic_cardrsp_cds_ring {
__le32 host_producer_crb; /* Crb to use */
__le32 interrupt_crb; /* Crb to use */
-};
+} __packed;
struct qlcnic_cardrsp_tx_ctx {
__le32 host_ctx_state; /* Starting state */
@@ -704,7 +737,7 @@
u8 virt_port; /* Virtual/Logical id of port */
struct qlcnic_cardrsp_cds_ring cds_ring; /* Card cds settings */
u8 reserved[128]; /* future expansion */
-};
+} __packed;
#define SIZEOF_HOSTRQ_TX(HOSTRQ_TX) (sizeof(HOSTRQ_TX))
#define SIZEOF_CARDRSP_TX(CARDRSP_TX) (sizeof(CARDRSP_TX))
@@ -738,40 +771,6 @@
uint8_t mac_addr[ETH_ALEN+2];
};
-/*
- * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
- * adjusted based on configured MTU.
- */
-#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US 3
-#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS 256
-#define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS 64
-#define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US 4
-
-#define QLCNIC_INTR_DEFAULT 0x04
-
-union qlcnic_nic_intr_coalesce_data {
- struct {
- u16 rx_packets;
- u16 rx_time_us;
- u16 tx_packets;
- u16 tx_time_us;
- } data;
- u64 word;
-};
-
-struct qlcnic_nic_intr_coalesce {
- u16 stats_time_us;
- u16 rate_sample_time;
- u16 flags;
- u16 rsvd_1;
- u32 low_threshold;
- u32 high_threshold;
- union qlcnic_nic_intr_coalesce_data normal;
- union qlcnic_nic_intr_coalesce_data low;
- union qlcnic_nic_intr_coalesce_data high;
- union qlcnic_nic_intr_coalesce_data irq;
-};
-
#define QLCNIC_HOST_REQUEST 0x13
#define QLCNIC_REQUEST 0x14
@@ -783,50 +782,20 @@
/*
* Driver --> Firmware
*/
-#define QLCNIC_H2C_OPCODE_START 0
-#define QLCNIC_H2C_OPCODE_CONFIG_RSS 1
-#define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL 2
-#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE 3
-#define QLCNIC_H2C_OPCODE_CONFIG_LED 4
-#define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS 5
-#define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 6
-#define QLCNIC_H2C_OPCODE_LRO_REQUEST 7
-#define QLCNIC_H2C_OPCODE_GET_SNMP_STATS 8
-#define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST 9
-#define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST 10
-#define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 11
-#define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE 12
-#define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST 13
-#define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST 14
-#define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST 15
-#define QLCNIC_H2C_OPCODE_GET_NET_STATS 16
-#define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V 17
-#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 18
-#define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE 20
-#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 21
-#define QLCNIC_C2C_OPCODE 22
-#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING 23
-#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 24
-#define QLCNIC_H2C_OPCODE_LAST 25
+#define QLCNIC_H2C_OPCODE_CONFIG_RSS 0x1
+#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE 0x3
+#define QLCNIC_H2C_OPCODE_CONFIG_LED 0x4
+#define QLCNIC_H2C_OPCODE_LRO_REQUEST 0x7
+#define QLCNIC_H2C_OPCODE_SET_MAC_RECEIVE_MODE 0xc
+#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 0x12
+#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 0x15
+#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING 0x17
+#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 0x18
/*
* Firmware --> Driver
*/
-#define QLCNIC_C2H_OPCODE_START 128
-#define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE 129
-#define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE 130
-#define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE 131
-#define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE 132
-#define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE 133
-#define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE 134
-#define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE 135
-#define QLCNIC_C2H_OPCODE_GET_SNMP_STATS 136
-#define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY 137
-#define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 138
-#define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
-#define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE 140
#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE 141
-#define QLCNIC_C2H_OPCODE_LAST 142
#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */
#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
@@ -895,7 +864,7 @@
__le64 qhdr;
__le64 req_hdr;
__le64 words[6];
-};
+} __packed;
struct qlcnic_mac_req {
u8 op;
@@ -906,7 +875,7 @@
struct qlcnic_vlan_req {
__le16 vlan_id;
__le16 rsvd[3];
-};
+} __packed;
struct qlcnic_ipaddr {
__be32 ipv4;
@@ -929,7 +898,8 @@
#define QLCNIC_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
-#define MSIX_ENTRIES_PER_ADAPTER NUM_STS_DESC_RINGS
+#define QLCNIC_DEF_NUM_STS_DESC_RINGS 4
+#define QLCNIC_MIN_NUM_RSS_RINGS 2
#define QLCNIC_MSIX_TBL_SPACE 8192
#define QLCNIC_PCI_REG_MSIX_TBL 0x44
#define QLCNIC_MSIX_TBL_PGSIZE 4096
@@ -942,6 +912,7 @@
#define __QLCNIC_RESETTING 2
#define __QLCNIC_START_FW 4
#define __QLCNIC_AER 5
+#define __QLCNIC_DIAG_RES_ALLOC 6
#define QLCNIC_INTERRUPT_TEST 1
#define QLCNIC_LOOPBACK_TEST 2
@@ -965,14 +936,14 @@
};
struct qlcnic_adapter {
- struct qlcnic_hardware_context ahw;
-
+ struct qlcnic_hardware_context *ahw;
+ struct qlcnic_recv_context *recv_ctx;
+ struct qlcnic_host_tx_ring *tx_ring;
struct net_device *netdev;
struct pci_dev *pdev;
- struct list_head mac_list;
- spinlock_t tx_clean_lock;
- spinlock_t mac_learn_lock;
+ unsigned long state;
+ u32 flags;
u16 num_txd;
u16 num_rxd;
@@ -983,14 +954,12 @@
u8 max_rds_rings;
u8 max_sds_rings;
u8 msix_supported;
- u8 rx_csum;
u8 portnum;
u8 physical_port;
u8 reset_context;
u8 mc_enabled;
u8 max_mc_count;
- u8 rss_supported;
u8 fw_wait_cnt;
u8 fw_fail_cnt;
u8 tx_timeo_cnt;
@@ -1015,7 +984,6 @@
u32 fw_hal_version;
u32 capabilities;
- u32 flags;
u32 irq;
u32 temp;
@@ -1033,31 +1001,29 @@
u8 mac_addr[ETH_ALEN];
u64 dev_rst_time;
+ unsigned long vlans[BITS_TO_LONGS(VLAN_N_VID)];
- struct vlan_group *vlgrp;
struct qlcnic_npar_info *npars;
struct qlcnic_eswitch *eswitch;
struct qlcnic_nic_template *nic_ops;
struct qlcnic_adapter_stats stats;
-
- struct qlcnic_recv_context recv_ctx;
- struct qlcnic_host_tx_ring *tx_ring;
+ struct list_head mac_list;
void __iomem *tgt_mask_reg;
void __iomem *tgt_status_reg;
void __iomem *crb_int_state_reg;
void __iomem *isr_int_vec;
- struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+ struct msix_entry *msix_entries;
struct delayed_work fw_work;
- struct qlcnic_nic_intr_coalesce coal;
struct qlcnic_filter_hash fhash;
- unsigned long state;
+ spinlock_t tx_clean_lock;
+ spinlock_t mac_learn_lock;
__le32 file_prd_off; /*File fw product offset*/
u32 fw_version;
const struct firmware *fw;
@@ -1079,7 +1045,7 @@
__le16 min_tx_bw;
__le16 max_tx_bw;
u8 reserved2[104];
-};
+} __packed;
struct qlcnic_pci_info {
__le16 id; /* pci function id */
@@ -1093,7 +1059,7 @@
u8 mac[ETH_ALEN];
u8 reserved2[106];
-};
+} __packed;
struct qlcnic_npar_info {
u16 pvid;
@@ -1210,15 +1176,160 @@
__le64 local_frames;
__le64 numbytes;
__le64 rsvd[3];
-};
+} __packed;
struct qlcnic_esw_statistics {
struct __qlcnic_esw_statistics rx;
struct __qlcnic_esw_statistics tx;
};
-int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
-int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
+struct qlcnic_common_entry_hdr {
+ __le32 type;
+ __le32 offset;
+ __le32 cap_size;
+ u8 mask;
+ u8 rsvd[2];
+ u8 flags;
+} __packed;
+
+struct __crb {
+ __le32 addr;
+ u8 stride;
+ u8 rsvd1[3];
+ __le32 data_size;
+ __le32 no_ops;
+ __le32 rsvd2[4];
+} __packed;
+
+struct __ctrl {
+ __le32 addr;
+ u8 stride;
+ u8 index_a;
+ __le16 timeout;
+ __le32 data_size;
+ __le32 no_ops;
+ u8 opcode;
+ u8 index_v;
+ u8 shl_val;
+ u8 shr_val;
+ __le32 val1;
+ __le32 val2;
+ __le32 val3;
+} __packed;
+
+struct __cache {
+ __le32 addr;
+ u8 stride;
+ u8 rsvd;
+ __le16 init_tag_val;
+ __le32 size;
+ __le32 no_ops;
+ __le32 ctrl_addr;
+ __le32 ctrl_val;
+ __le32 read_addr;
+ u8 read_addr_stride;
+ u8 read_addr_num;
+ u8 rsvd1[2];
+} __packed;
+
+struct __ocm {
+ u8 rsvd[8];
+ __le32 size;
+ __le32 no_ops;
+ u8 rsvd1[8];
+ __le32 read_addr;
+ __le32 read_addr_stride;
+} __packed;
+
+struct __mem {
+ u8 rsvd[24];
+ __le32 addr;
+ __le32 size;
+} __packed;
+
+struct __mux {
+ __le32 addr;
+ u8 rsvd[4];
+ __le32 size;
+ __le32 no_ops;
+ __le32 val;
+ __le32 val_stride;
+ __le32 read_addr;
+ u8 rsvd2[4];
+} __packed;
+
+struct __queue {
+ __le32 sel_addr;
+ __le16 stride;
+ u8 rsvd[2];
+ __le32 size;
+ __le32 no_ops;
+ u8 rsvd2[8];
+ __le32 read_addr;
+ u8 read_addr_stride;
+ u8 read_addr_cnt;
+ u8 rsvd3[2];
+} __packed;
+
+struct qlcnic_dump_entry {
+ struct qlcnic_common_entry_hdr hdr;
+ union {
+ struct __crb crb;
+ struct __cache cache;
+ struct __ocm ocm;
+ struct __mem mem;
+ struct __mux mux;
+ struct __queue que;
+ struct __ctrl ctrl;
+ } region;
+} __packed;
+
+enum op_codes {
+ QLCNIC_DUMP_NOP = 0,
+ QLCNIC_DUMP_READ_CRB = 1,
+ QLCNIC_DUMP_READ_MUX = 2,
+ QLCNIC_DUMP_QUEUE = 3,
+ QLCNIC_DUMP_BRD_CONFIG = 4,
+ QLCNIC_DUMP_READ_OCM = 6,
+ QLCNIC_DUMP_PEG_REG = 7,
+ QLCNIC_DUMP_L1_DTAG = 8,
+ QLCNIC_DUMP_L1_ITAG = 9,
+ QLCNIC_DUMP_L1_DATA = 11,
+ QLCNIC_DUMP_L1_INST = 12,
+ QLCNIC_DUMP_L2_DTAG = 21,
+ QLCNIC_DUMP_L2_ITAG = 22,
+ QLCNIC_DUMP_L2_DATA = 23,
+ QLCNIC_DUMP_L2_INST = 24,
+ QLCNIC_DUMP_READ_ROM = 71,
+ QLCNIC_DUMP_READ_MEM = 72,
+ QLCNIC_DUMP_READ_CTRL = 98,
+ QLCNIC_DUMP_TLHDR = 99,
+ QLCNIC_DUMP_RDEND = 255
+};
+
+#define QLCNIC_DUMP_WCRB BIT_0
+#define QLCNIC_DUMP_RWCRB BIT_1
+#define QLCNIC_DUMP_ANDCRB BIT_2
+#define QLCNIC_DUMP_ORCRB BIT_3
+#define QLCNIC_DUMP_POLLCRB BIT_4
+#define QLCNIC_DUMP_RD_SAVE BIT_5
+#define QLCNIC_DUMP_WRT_SAVED BIT_6
+#define QLCNIC_DUMP_MOD_SAVE_ST BIT_7
+#define QLCNIC_DUMP_SKIP BIT_7
+
+#define QLCNIC_DUMP_MASK_MIN 3
+#define QLCNIC_DUMP_MASK_DEF 0x0f
+#define QLCNIC_DUMP_MASK_MAX 0xff
+#define QLCNIC_FORCE_FW_DUMP_KEY 0xdeadfeed
+
+struct qlcnic_dump_operations {
+ enum op_codes opcode;
+ u32 (*handler)(struct qlcnic_adapter *,
+ struct qlcnic_dump_entry *, u32 *);
+};
+
+int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter);
+int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config);
u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
@@ -1264,6 +1375,7 @@
int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate);
void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter);
void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter);
+int qlcnic_dump_fw(struct qlcnic_adapter *);
/* Functions from qlcnic_init.c */
int qlcnic_load_firmware(struct qlcnic_adapter *adapter);
@@ -1274,7 +1386,7 @@
int qlcnic_setup_idc_param(struct qlcnic_adapter *adapter);
int qlcnic_check_flash_fw_ver(struct qlcnic_adapter *adapter);
-int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, u32 addr, u32 *valp);
int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
u8 *bytes, size_t size);
int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter);
@@ -1294,7 +1406,7 @@
int qlcnic_check_fw_status(struct qlcnic_adapter *adapter);
void qlcnic_watchdog_task(struct work_struct *work);
-void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter,
struct qlcnic_host_rds_ring *rds_ring);
int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max);
void qlcnic_set_multi(struct net_device *netdev);
@@ -1308,6 +1420,8 @@
int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
+u32 qlcnic_fix_features(struct net_device *netdev, u32 features);
+int qlcnic_set_features(struct net_device *netdev, u32 features);
int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable);
int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable);
int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
@@ -1322,6 +1436,9 @@
void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val);
+int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data);
+void qlcnic_dev_request_reset(struct qlcnic_adapter *);
/* Management functions */
int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*);
@@ -1379,8 +1496,7 @@
static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring)
{
- smp_mb();
- if (tx_ring->producer < tx_ring->sw_consumer)
+ if (likely(tx_ring->producer < tx_ring->sw_consumer))
return tx_ring->sw_consumer - tx_ring->producer;
else
return tx_ring->sw_consumer + tx_ring->num_desc -
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index 27631f2..bab041a 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -64,14 +64,105 @@
return rcode;
}
+static uint32_t qlcnic_temp_checksum(uint32_t *temp_buffer, u16 temp_size)
+{
+ uint64_t sum = 0;
+ int count = temp_size / sizeof(uint32_t);
+ while (count-- > 0)
+ sum += *temp_buffer++;
+ while (sum >> 32)
+ sum = (sum & 0xFFFFFFFF) + (sum >> 32);
+ return ~sum;
+}
+
+int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter)
+{
+ int err, i;
+ u16 temp_size;
+ void *tmp_addr;
+ u32 version, csum, *template, *tmp_buf;
+ struct qlcnic_hardware_context *ahw;
+ struct qlcnic_dump_template_hdr *tmpl_hdr, *tmp_tmpl;
+ dma_addr_t tmp_addr_t = 0;
+
+ ahw = adapter->ahw;
+ err = qlcnic_issue_cmd(adapter,
+ adapter->ahw->pci_func,
+ adapter->fw_hal_version,
+ 0,
+ 0,
+ 0,
+ QLCNIC_CDRP_CMD_TEMP_SIZE);
+ if (err != QLCNIC_RCODE_SUCCESS) {
+ err = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
+ dev_err(&adapter->pdev->dev,
+ "Failed to get template size %d\n", err);
+ err = -EIO;
+ return err;
+ }
+ version = QLCRD32(adapter, QLCNIC_ARG3_CRB_OFFSET);
+ temp_size = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
+ if (!temp_size)
+ return -EIO;
+
+ tmp_addr = dma_alloc_coherent(&adapter->pdev->dev, temp_size,
+ &tmp_addr_t, GFP_KERNEL);
+ if (!tmp_addr) {
+ dev_err(&adapter->pdev->dev,
+ "Can't get memory for FW dump template\n");
+ return -ENOMEM;
+ }
+ err = qlcnic_issue_cmd(adapter,
+ adapter->ahw->pci_func,
+ adapter->fw_hal_version,
+ LSD(tmp_addr_t),
+ MSD(tmp_addr_t),
+ temp_size,
+ QLCNIC_CDRP_CMD_GET_TEMP_HDR);
+
+ if (err != QLCNIC_RCODE_SUCCESS) {
+ dev_err(&adapter->pdev->dev,
+ "Failed to get mini dump template header %d\n", err);
+ err = -EIO;
+ goto error;
+ }
+ tmp_tmpl = (struct qlcnic_dump_template_hdr *) tmp_addr;
+ csum = qlcnic_temp_checksum((uint32_t *) tmp_addr, temp_size);
+ if (csum) {
+ dev_err(&adapter->pdev->dev,
+ "Template header checksum validation failed\n");
+ err = -EIO;
+ goto error;
+ }
+ ahw->fw_dump.tmpl_hdr = vzalloc(temp_size);
+ if (!ahw->fw_dump.tmpl_hdr) {
+ err = -EIO;
+ goto error;
+ }
+ tmp_buf = (u32 *) tmp_addr;
+ template = (u32 *) ahw->fw_dump.tmpl_hdr;
+ for (i = 0; i < temp_size/sizeof(u32); i++)
+ *template++ = __le32_to_cpu(*tmp_buf++);
+
+ tmpl_hdr = ahw->fw_dump.tmpl_hdr;
+ if (tmpl_hdr->cap_mask > QLCNIC_DUMP_MASK_DEF &&
+ tmpl_hdr->cap_mask <= QLCNIC_DUMP_MASK_MAX)
+ tmpl_hdr->drv_cap_mask = tmpl_hdr->cap_mask;
+ else
+ tmpl_hdr->drv_cap_mask = QLCNIC_DUMP_MASK_DEF;
+error:
+ dma_free_coherent(&adapter->pdev->dev, temp_size, tmp_addr, tmp_addr_t);
+ return err;
+}
+
int
qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu)
{
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
if (recv_ctx->state == QLCNIC_HOST_CTX_STATE_ACTIVE) {
if (qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
recv_ctx->context_id,
mtu,
@@ -102,12 +193,12 @@
dma_addr_t hostrq_phys_addr, cardrsp_phys_addr;
u64 phys_addr;
- int i, nrds_rings, nsds_rings;
+ u8 i, nrds_rings, nsds_rings;
size_t rq_size, rsp_size;
u32 cap, reg, val, reg2;
int err;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
nrds_rings = adapter->max_rds_rings;
nsds_rings = adapter->max_sds_rings;
@@ -119,14 +210,14 @@
SIZEOF_CARDRSP_RX(struct qlcnic_cardrsp_rx_ctx, nrds_rings,
nsds_rings);
- addr = pci_alloc_consistent(adapter->pdev,
- rq_size, &hostrq_phys_addr);
+ addr = dma_alloc_coherent(&adapter->pdev->dev, rq_size,
+ &hostrq_phys_addr, GFP_KERNEL);
if (addr == NULL)
return -ENOMEM;
prq = (struct qlcnic_hostrq_rx_ctx *)addr;
- addr = pci_alloc_consistent(adapter->pdev,
- rsp_size, &cardrsp_phys_addr);
+ addr = dma_alloc_coherent(&adapter->pdev->dev, rsp_size,
+ &cardrsp_phys_addr, GFP_KERNEL);
if (addr == NULL) {
err = -ENOMEM;
goto out_free_rq;
@@ -151,7 +242,7 @@
prq->num_rds_rings = cpu_to_le16(nrds_rings);
prq->num_sds_rings = cpu_to_le16(nsds_rings);
- prq->rds_ring_offset = cpu_to_le32(0);
+ prq->rds_ring_offset = 0;
val = le32_to_cpu(prq->rds_ring_offset) +
(sizeof(struct qlcnic_hostrq_rds_ring) * nrds_rings);
@@ -187,7 +278,7 @@
phys_addr = hostrq_phys_addr;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
(u32)(phys_addr >> 32),
(u32)(phys_addr & 0xffffffff),
@@ -207,7 +298,7 @@
rds_ring = &recv_ctx->rds_rings[i];
reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
- rds_ring->crb_rcv_producer = adapter->ahw.pci_base0 + reg;
+ rds_ring->crb_rcv_producer = adapter->ahw->pci_base0 + reg;
}
prsp_sds = ((struct qlcnic_cardrsp_sds_ring *)
@@ -219,8 +310,8 @@
reg = le32_to_cpu(prsp_sds[i].host_consumer_crb);
reg2 = le32_to_cpu(prsp_sds[i].interrupt_crb);
- sds_ring->crb_sts_consumer = adapter->ahw.pci_base0 + reg;
- sds_ring->crb_intr_mask = adapter->ahw.pci_base0 + reg2;
+ sds_ring->crb_sts_consumer = adapter->ahw->pci_base0 + reg;
+ sds_ring->crb_intr_mask = adapter->ahw->pci_base0 + reg2;
}
recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
@@ -228,19 +319,20 @@
recv_ctx->virt_port = prsp->virt_port;
out_free_rsp:
- pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
+ dma_free_coherent(&adapter->pdev->dev, rsp_size, prsp,
+ cardrsp_phys_addr);
out_free_rq:
- pci_free_consistent(adapter->pdev, rq_size, prq, hostrq_phys_addr);
+ dma_free_coherent(&adapter->pdev->dev, rq_size, prq, hostrq_phys_addr);
return err;
}
static void
qlcnic_fw_cmd_destroy_rx_ctx(struct qlcnic_adapter *adapter)
{
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
if (qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
recv_ctx->context_id,
QLCNIC_DESTROY_CTX_RESET,
@@ -274,14 +366,14 @@
*(tx_ring->hw_consumer) = 0;
rq_size = SIZEOF_HOSTRQ_TX(struct qlcnic_hostrq_tx_ctx);
- rq_addr = pci_alloc_consistent(adapter->pdev,
- rq_size, &rq_phys_addr);
+ rq_addr = dma_alloc_coherent(&adapter->pdev->dev, rq_size,
+ &rq_phys_addr, GFP_KERNEL);
if (!rq_addr)
return -ENOMEM;
rsp_size = SIZEOF_CARDRSP_TX(struct qlcnic_cardrsp_tx_ctx);
- rsp_addr = pci_alloc_consistent(adapter->pdev,
- rsp_size, &rsp_phys_addr);
+ rsp_addr = dma_alloc_coherent(&adapter->pdev->dev, rsp_size,
+ &rsp_phys_addr, GFP_KERNEL);
if (!rsp_addr) {
err = -ENOMEM;
goto out_free_rq;
@@ -313,7 +405,7 @@
phys_addr = rq_phys_addr;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
(u32)(phys_addr >> 32),
((u32)phys_addr & 0xffffffff),
@@ -322,7 +414,7 @@
if (err == QLCNIC_RCODE_SUCCESS) {
temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
- tx_ring->crb_cmd_producer = adapter->ahw.pci_base0 + temp;
+ tx_ring->crb_cmd_producer = adapter->ahw->pci_base0 + temp;
adapter->tx_context_id =
le16_to_cpu(prsp->context_id);
@@ -332,10 +424,11 @@
err = -EIO;
}
- pci_free_consistent(adapter->pdev, rsp_size, rsp_addr, rsp_phys_addr);
+ dma_free_coherent(&adapter->pdev->dev, rsp_size, rsp_addr,
+ rsp_phys_addr);
out_free_rq:
- pci_free_consistent(adapter->pdev, rq_size, rq_addr, rq_phys_addr);
+ dma_free_coherent(&adapter->pdev->dev, rq_size, rq_addr, rq_phys_addr);
return err;
}
@@ -344,7 +437,7 @@
qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
{
if (qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
adapter->tx_context_id,
QLCNIC_DESTROY_CTX_RESET,
@@ -357,33 +450,15 @@
}
int
-qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
-{
-
- if (qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
- adapter->fw_hal_version,
- reg,
- 0,
- 0,
- QLCNIC_CDRP_CMD_READ_PHY)) {
-
- return -EIO;
- }
-
- return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
-}
-
-int
-qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val)
+qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config)
{
return qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
- reg,
- val,
+ config,
0,
- QLCNIC_CDRP_CMD_WRITE_PHY);
+ 0,
+ QLCNIC_CDRP_CMD_CONFIG_PORT);
}
int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
@@ -398,20 +473,19 @@
struct pci_dev *pdev = adapter->pdev;
- recv_ctx = &adapter->recv_ctx;
+ recv_ctx = adapter->recv_ctx;
tx_ring = adapter->tx_ring;
- tx_ring->hw_consumer = (__le32 *)pci_alloc_consistent(pdev, sizeof(u32),
- &tx_ring->hw_cons_phys_addr);
+ tx_ring->hw_consumer = (__le32 *) dma_alloc_coherent(&pdev->dev,
+ sizeof(u32), &tx_ring->hw_cons_phys_addr, GFP_KERNEL);
if (tx_ring->hw_consumer == NULL) {
dev_err(&pdev->dev, "failed to allocate tx consumer\n");
return -ENOMEM;
}
- *(tx_ring->hw_consumer) = 0;
/* cmd desc ring */
- addr = pci_alloc_consistent(pdev, TX_DESC_RINGSIZE(tx_ring),
- &tx_ring->phys_addr);
+ addr = dma_alloc_coherent(&pdev->dev, TX_DESC_RINGSIZE(tx_ring),
+ &tx_ring->phys_addr, GFP_KERNEL);
if (addr == NULL) {
dev_err(&pdev->dev, "failed to allocate tx desc ring\n");
@@ -423,9 +497,9 @@
for (ring = 0; ring < adapter->max_rds_rings; ring++) {
rds_ring = &recv_ctx->rds_rings[ring];
- addr = pci_alloc_consistent(adapter->pdev,
+ addr = dma_alloc_coherent(&adapter->pdev->dev,
RCV_DESC_RINGSIZE(rds_ring),
- &rds_ring->phys_addr);
+ &rds_ring->phys_addr, GFP_KERNEL);
if (addr == NULL) {
dev_err(&pdev->dev,
"failed to allocate rds ring [%d]\n", ring);
@@ -439,9 +513,9 @@
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &recv_ctx->sds_rings[ring];
- addr = pci_alloc_consistent(adapter->pdev,
+ addr = dma_alloc_coherent(&adapter->pdev->dev,
STATUS_DESC_RINGSIZE(sds_ring),
- &sds_ring->phys_addr);
+ &sds_ring->phys_addr, GFP_KERNEL);
if (addr == NULL) {
dev_err(&pdev->dev,
"failed to allocate sds ring [%d]\n", ring);
@@ -501,11 +575,11 @@
struct qlcnic_host_tx_ring *tx_ring;
int ring;
- recv_ctx = &adapter->recv_ctx;
+ recv_ctx = adapter->recv_ctx;
tx_ring = adapter->tx_ring;
if (tx_ring->hw_consumer != NULL) {
- pci_free_consistent(adapter->pdev,
+ dma_free_coherent(&adapter->pdev->dev,
sizeof(u32),
tx_ring->hw_consumer,
tx_ring->hw_cons_phys_addr);
@@ -513,7 +587,7 @@
}
if (tx_ring->desc_head != NULL) {
- pci_free_consistent(adapter->pdev,
+ dma_free_coherent(&adapter->pdev->dev,
TX_DESC_RINGSIZE(tx_ring),
tx_ring->desc_head, tx_ring->phys_addr);
tx_ring->desc_head = NULL;
@@ -523,7 +597,7 @@
rds_ring = &recv_ctx->rds_rings[ring];
if (rds_ring->desc_head != NULL) {
- pci_free_consistent(adapter->pdev,
+ dma_free_coherent(&adapter->pdev->dev,
RCV_DESC_RINGSIZE(rds_ring),
rds_ring->desc_head,
rds_ring->phys_addr);
@@ -535,7 +609,7 @@
sds_ring = &recv_ctx->sds_rings[ring];
if (sds_ring->desc_head != NULL) {
- pci_free_consistent(adapter->pdev,
+ dma_free_coherent(&adapter->pdev->dev,
STATUS_DESC_RINGSIZE(sds_ring),
sds_ring->desc_head,
sds_ring->phys_addr);
@@ -551,9 +625,9 @@
int err;
u32 arg1;
- arg1 = adapter->ahw.pci_func | BIT_8;
+ arg1 = adapter->ahw->pci_func | BIT_8;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
arg1,
0,
@@ -582,15 +656,15 @@
void *nic_info_addr;
size_t nic_size = sizeof(struct qlcnic_info);
- nic_info_addr = pci_alloc_consistent(adapter->pdev,
- nic_size, &nic_dma_t);
+ nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size,
+ &nic_dma_t, GFP_KERNEL);
if (!nic_info_addr)
return -ENOMEM;
memset(nic_info_addr, 0, nic_size);
nic_info = (struct qlcnic_info *) nic_info_addr;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
MSD(nic_dma_t),
LSD(nic_dma_t),
@@ -623,7 +697,8 @@
err = -EIO;
}
- pci_free_consistent(adapter->pdev, nic_size, nic_info_addr, nic_dma_t);
+ dma_free_coherent(&adapter->pdev->dev, nic_size, nic_info_addr,
+ nic_dma_t);
return err;
}
@@ -639,8 +714,8 @@
if (adapter->op_mode != QLCNIC_MGMT_FUNC)
return err;
- nic_info_addr = pci_alloc_consistent(adapter->pdev, nic_size,
- &nic_dma_t);
+ nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size,
+ &nic_dma_t, GFP_KERNEL);
if (!nic_info_addr)
return -ENOMEM;
@@ -659,7 +734,7 @@
nic_info->max_tx_bw = cpu_to_le16(nic->max_tx_bw);
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
MSD(nic_dma_t),
LSD(nic_dma_t),
@@ -672,7 +747,8 @@
err = -EIO;
}
- pci_free_consistent(adapter->pdev, nic_size, nic_info_addr, nic_dma_t);
+ dma_free_coherent(&adapter->pdev->dev, nic_size, nic_info_addr,
+ nic_dma_t);
return err;
}
@@ -687,15 +763,15 @@
size_t npar_size = sizeof(struct qlcnic_pci_info);
size_t pci_size = npar_size * QLCNIC_MAX_PCI_FUNC;
- pci_info_addr = pci_alloc_consistent(adapter->pdev, pci_size,
- &pci_info_dma_t);
+ pci_info_addr = dma_alloc_coherent(&adapter->pdev->dev, pci_size,
+ &pci_info_dma_t, GFP_KERNEL);
if (!pci_info_addr)
return -ENOMEM;
memset(pci_info_addr, 0, pci_size);
npar = (struct qlcnic_pci_info *) pci_info_addr;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
MSD(pci_info_dma_t),
LSD(pci_info_dma_t),
@@ -721,7 +797,7 @@
err = -EIO;
}
- pci_free_consistent(adapter->pdev, pci_size, pci_info_addr,
+ dma_free_coherent(&adapter->pdev->dev, pci_size, pci_info_addr,
pci_info_dma_t);
return err;
}
@@ -741,7 +817,7 @@
arg1 |= pci_func << 8;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
arg1,
0,
@@ -775,14 +851,14 @@
return -ENOMEM;
if (adapter->op_mode != QLCNIC_MGMT_FUNC &&
- func != adapter->ahw.pci_func) {
+ func != adapter->ahw->pci_func) {
dev_err(&adapter->pdev->dev,
"Not privilege to query stats for func=%d", func);
return -EIO;
}
- stats_addr = pci_alloc_consistent(adapter->pdev, stats_size,
- &stats_dma_t);
+ stats_addr = dma_alloc_coherent(&adapter->pdev->dev, stats_size,
+ &stats_dma_t, GFP_KERNEL);
if (!stats_addr) {
dev_err(&adapter->pdev->dev, "Unable to allocate memory\n");
return -ENOMEM;
@@ -793,7 +869,7 @@
arg1 |= rx_tx << 15 | stats_size << 16;
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
arg1,
MSD(stats_dma_t),
@@ -816,7 +892,7 @@
esw_stats->numbytes = le64_to_cpu(stats->numbytes);
}
- pci_free_consistent(adapter->pdev, stats_size, stats_addr,
+ dma_free_coherent(&adapter->pdev->dev, stats_size, stats_addr,
stats_dma_t);
return err;
}
@@ -900,7 +976,7 @@
arg1 |= BIT_14 | rx_tx << 15;
return qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
arg1,
0,
@@ -921,7 +997,7 @@
u8 pci_func;
pci_func = (*arg1 >> 8);
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
*arg1,
0,
@@ -999,7 +1075,7 @@
}
err = qlcnic_issue_cmd(adapter,
- adapter->ahw.pci_func,
+ adapter->ahw->pci_func,
adapter->fw_hal_version,
arg1,
arg2,
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 45b2755..9efc690 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -150,10 +150,10 @@
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
int check_sfp_module = 0;
- u16 pcifn = adapter->ahw.pci_func;
+ u16 pcifn = adapter->ahw->pci_func;
/* read which mode */
- if (adapter->ahw.port_type == QLCNIC_GBE) {
+ if (adapter->ahw->port_type == QLCNIC_GBE) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
@@ -166,11 +166,11 @@
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
ecmd->duplex = adapter->link_duplex;
ecmd->autoneg = adapter->link_autoneg;
- } else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+ } else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val;
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
@@ -183,15 +183,15 @@
}
if (netif_running(dev) && adapter->has_link_events) {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
ecmd->autoneg = adapter->link_autoneg;
ecmd->duplex = adapter->link_duplex;
goto skip;
}
val = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
- ecmd->speed = P3P_LINK_SPEED_MHZ *
- P3P_LINK_SPEED_VAL(pcifn, val);
+ ethtool_cmd_speed_set(ecmd, P3P_LINK_SPEED_MHZ *
+ P3P_LINK_SPEED_VAL(pcifn, val));
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
} else
@@ -201,7 +201,7 @@
ecmd->phy_address = adapter->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
- switch (adapter->ahw.board_type) {
+ switch (adapter->ahw->board_type) {
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
@@ -238,7 +238,7 @@
ecmd->autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_TP:
- if (adapter->ahw.port_type == QLCNIC_XGBE) {
+ if (adapter->ahw->port_type == QLCNIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |=
@@ -256,7 +256,7 @@
break;
default:
dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
- adapter->ahw.board_type);
+ adapter->ahw->board_type);
return -EIO;
}
@@ -284,50 +284,44 @@
static int
qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
+ u32 config = 0;
+ u32 ret = 0;
struct qlcnic_adapter *adapter = netdev_priv(dev);
- __u32 status;
+
+ if (adapter->ahw->port_type != QLCNIC_GBE)
+ return -EOPNOTSUPP;
/* read which mode */
- if (adapter->ahw.port_type == QLCNIC_GBE) {
- /* autonegotiation */
- if (qlcnic_fw_cmd_set_phy(adapter,
- QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG,
- ecmd->autoneg) != 0)
- return -EIO;
- else
- adapter->link_autoneg = ecmd->autoneg;
+ if (ecmd->duplex)
+ config |= 0x1;
- if (qlcnic_fw_cmd_query_phy(adapter,
- QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
- &status) != 0)
- return -EIO;
+ if (ecmd->autoneg)
+ config |= 0x2;
- switch (ecmd->speed) {
- case SPEED_10:
- qlcnic_set_phy_speed(status, 0);
- break;
- case SPEED_100:
- qlcnic_set_phy_speed(status, 1);
- break;
- case SPEED_1000:
- qlcnic_set_phy_speed(status, 2);
- break;
- }
+ switch (ethtool_cmd_speed(ecmd)) {
+ case SPEED_10:
+ config |= (0 << 8);
+ break;
+ case SPEED_100:
+ config |= (1 << 8);
+ break;
+ case SPEED_1000:
+ config |= (10 << 8);
+ break;
+ default:
+ return -EIO;
+ }
- if (ecmd->duplex == DUPLEX_HALF)
- qlcnic_clear_phy_duplex(status);
- if (ecmd->duplex == DUPLEX_FULL)
- qlcnic_set_phy_duplex(status);
- if (qlcnic_fw_cmd_set_phy(adapter,
- QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
- *((int *)&status)) != 0)
- return -EIO;
- else {
- adapter->link_speed = ecmd->speed;
- adapter->link_duplex = ecmd->duplex;
- }
- } else
+ ret = qlcnic_fw_cmd_set_port(adapter, config);
+
+ if (ret == QLCNIC_RCODE_NOT_SUPPORTED)
return -EOPNOTSUPP;
+ else if (ret)
+ return -EIO;
+
+ adapter->link_speed = ethtool_cmd_speed(ecmd);
+ adapter->link_duplex = ecmd->duplex;
+ adapter->link_autoneg = ecmd->autoneg;
if (!netif_running(dev))
return 0;
@@ -340,14 +334,14 @@
qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
struct qlcnic_host_sds_ring *sds_ring;
u32 *regs_buff = p;
int ring, i = 0, j = 0;
memset(p, 0, qlcnic_get_regs_len(dev));
regs->version = (QLCNIC_ETHTOOL_REGS_VER << 24) |
- (adapter->ahw.revision_id << 16) | (adapter->pdev)->device;
+ (adapter->ahw->revision_id << 16) | (adapter->pdev)->device;
regs_buff[0] = (0xcafe0000 | (QLCNIC_DEV_INFO_SIZE & 0xffff));
regs_buff[1] = QLCNIC_MGMT_API_VERSION;
@@ -382,7 +376,7 @@
u32 val;
val = QLCRD32(adapter, CRB_XG_STATE_P3P);
- val = XG_LINK_STATE_P3P(adapter->ahw.pci_func, val);
+ val = XG_LINK_STATE_P3P(adapter->ahw->pci_func, val);
return (val == XG_LINK_UP_P3P) ? 0 : 1;
}
@@ -474,6 +468,39 @@
return qlcnic_reset_context(adapter);
}
+static void qlcnic_get_channels(struct net_device *dev,
+ struct ethtool_channels *channel)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(dev);
+
+ channel->max_rx = rounddown_pow_of_two(min_t(int,
+ adapter->max_rx_ques, num_online_cpus()));
+ channel->max_tx = adapter->max_tx_ques;
+
+ channel->rx_count = adapter->max_sds_rings;
+ channel->tx_count = adapter->max_tx_ques;
+}
+
+static int qlcnic_set_channels(struct net_device *dev,
+ struct ethtool_channels *channel)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(dev);
+ int err;
+
+ if (channel->other_count || channel->combined_count ||
+ channel->tx_count != channel->max_tx)
+ return -EINVAL;
+
+ err = qlcnic_validate_max_rss(dev, channel->max_rx, channel->rx_count);
+ if (err)
+ return err;
+
+ err = qlcnic_set_max_rss(adapter, channel->rx_count);
+ netdev_info(dev, "allocated 0x%x sds rings\n",
+ adapter->max_sds_rings);
+ return err;
+}
+
static void
qlcnic_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
@@ -482,7 +509,7 @@
int port = adapter->physical_port;
__u32 val;
- if (adapter->ahw.port_type == QLCNIC_GBE) {
+ if (adapter->ahw->port_type == QLCNIC_GBE) {
if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
return;
/* get flow control settings */
@@ -504,7 +531,7 @@
pause->tx_pause = !(qlcnic_gb_get_gb3_mask(val));
break;
}
- } else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+ } else if (adapter->ahw->port_type == QLCNIC_XGBE) {
if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
return;
pause->rx_pause = 1;
@@ -515,7 +542,7 @@
pause->tx_pause = !(qlcnic_xg_get_xg1_mask(val));
} else {
dev_err(&netdev->dev, "Unknown board type: %x\n",
- adapter->ahw.port_type);
+ adapter->ahw->port_type);
}
}
@@ -528,7 +555,7 @@
__u32 val;
/* read mode */
- if (adapter->ahw.port_type == QLCNIC_GBE) {
+ if (adapter->ahw->port_type == QLCNIC_GBE) {
if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
return -EIO;
/* set flow control */
@@ -571,7 +598,7 @@
break;
}
QLCWR32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, val);
- } else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+ } else if (adapter->ahw->port_type == QLCNIC_XGBE) {
if (!pause->rx_pause || pause->autoneg)
return -EOPNOTSUPP;
@@ -593,7 +620,7 @@
QLCWR32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, val);
} else {
dev_err(&netdev->dev, "Unknown board type: %x\n",
- adapter->ahw.port_type);
+ adapter->ahw->port_type);
}
return 0;
}
@@ -639,8 +666,8 @@
goto clear_it;
adapter->diag_cnt = 0;
- ret = qlcnic_issue_cmd(adapter, adapter->ahw.pci_func,
- adapter->fw_hal_version, adapter->portnum,
+ ret = qlcnic_issue_cmd(adapter, adapter->ahw->pci_func,
+ adapter->fw_hal_version, adapter->ahw->pci_func,
0, 0, 0x00000011);
if (ret)
goto done;
@@ -749,14 +776,14 @@
return;
memset(&port_stats, 0, sizeof(struct qlcnic_esw_statistics));
- ret = qlcnic_get_port_stats(adapter, adapter->ahw.pci_func,
+ ret = qlcnic_get_port_stats(adapter, adapter->ahw->pci_func,
QLCNIC_QUERY_RX_COUNTER, &port_stats.rx);
if (ret)
return;
qlcnic_fill_device_stats(&index, data, &port_stats.rx);
- ret = qlcnic_get_port_stats(adapter, adapter->ahw.pci_func,
+ ret = qlcnic_get_port_stats(adapter, adapter->ahw->pci_func,
QLCNIC_QUERY_TX_COUNTER, &port_stats.tx);
if (ret)
return;
@@ -764,115 +791,49 @@
qlcnic_fill_device_stats(&index, data, &port_stats.tx);
}
-static int qlcnic_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct qlcnic_adapter *adapter = netdev_priv(dev);
-
- if ((adapter->flags & QLCNIC_ESWITCH_ENABLED))
- return -EOPNOTSUPP;
- if (data)
- dev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
- else
- dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-
- return 0;
-
-}
-static u32 qlcnic_get_tx_csum(struct net_device *dev)
-{
- return dev->features & NETIF_F_IP_CSUM;
-}
-
-static u32 qlcnic_get_rx_csum(struct net_device *dev)
-{
- struct qlcnic_adapter *adapter = netdev_priv(dev);
- return adapter->rx_csum;
-}
-
-static int qlcnic_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct qlcnic_adapter *adapter = netdev_priv(dev);
-
- if ((adapter->flags & QLCNIC_ESWITCH_ENABLED))
- return -EOPNOTSUPP;
- if (!!data) {
- adapter->rx_csum = !!data;
- return 0;
- }
-
- if (dev->features & NETIF_F_LRO) {
- if (qlcnic_config_hw_lro(adapter, QLCNIC_LRO_DISABLED))
- return -EIO;
-
- dev->features &= ~NETIF_F_LRO;
- qlcnic_send_lro_cleanup(adapter);
- dev_info(&adapter->pdev->dev,
- "disabling LRO as rx_csum is off\n");
- }
- adapter->rx_csum = !!data;
- return 0;
-}
-
-static u32 qlcnic_get_tso(struct net_device *dev)
-{
- return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
-}
-
-static int qlcnic_set_tso(struct net_device *dev, u32 data)
-{
- struct qlcnic_adapter *adapter = netdev_priv(dev);
- if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO))
- return -EOPNOTSUPP;
- if (data)
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
- else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
- return 0;
-}
-
-static int qlcnic_blink_led(struct net_device *dev, u32 val)
+static int qlcnic_set_led(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
int max_sds_rings = adapter->max_sds_rings;
- int dev_down = 0;
- int ret;
- if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
- dev_down = 1;
- if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
- return -EIO;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+ if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+ return -EIO;
- ret = qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST);
- if (ret) {
- clear_bit(__QLCNIC_RESETTING, &adapter->state);
- return ret;
+ if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST)) {
+ clear_bit(__QLCNIC_RESETTING, &adapter->state);
+ return -EIO;
+ }
+ set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
}
- }
- ret = adapter->nic_ops->config_led(adapter, 1, 0xf);
- if (ret) {
+ if (adapter->nic_ops->config_led(adapter, 1, 0xf) == 0)
+ return 0;
+
dev_err(&adapter->pdev->dev,
"Failed to set LED blink state.\n");
- goto done;
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ if (adapter->nic_ops->config_led(adapter, 0, 0xf))
+ dev_err(&adapter->pdev->dev,
+ "Failed to reset LED blink state.\n");
+
+ break;
+
+ default:
+ return -EINVAL;
}
- msleep_interruptible(val * 1000);
-
- ret = adapter->nic_ops->config_led(adapter, 0, 0xf);
- if (ret) {
- dev_err(&adapter->pdev->dev,
- "Failed to reset LED blink state.\n");
- goto done;
- }
-
-done:
- if (dev_down) {
+ if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state)) {
qlcnic_diag_free_res(dev, max_sds_rings);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
}
- return ret;
+ return -EIO;
}
static void
@@ -936,8 +897,8 @@
*/
if (ethcoal->rx_coalesce_usecs > 0xffff ||
ethcoal->rx_max_coalesced_frames > 0xffff ||
- ethcoal->tx_coalesce_usecs > 0xffff ||
- ethcoal->tx_max_coalesced_frames > 0xffff ||
+ ethcoal->tx_coalesce_usecs ||
+ ethcoal->tx_max_coalesced_frames ||
ethcoal->rx_coalesce_usecs_irq ||
ethcoal->rx_max_coalesced_frames_irq ||
ethcoal->tx_coalesce_usecs_irq ||
@@ -959,21 +920,17 @@
if (!ethcoal->rx_coalesce_usecs ||
!ethcoal->rx_max_coalesced_frames) {
- adapter->coal.flags = QLCNIC_INTR_DEFAULT;
- adapter->coal.normal.data.rx_time_us =
+ adapter->ahw->coal.flag = QLCNIC_INTR_DEFAULT;
+ adapter->ahw->coal.rx_time_us =
QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
- adapter->coal.normal.data.rx_packets =
+ adapter->ahw->coal.rx_packets =
QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
} else {
- adapter->coal.flags = 0;
- adapter->coal.normal.data.rx_time_us =
- ethcoal->rx_coalesce_usecs;
- adapter->coal.normal.data.rx_packets =
- ethcoal->rx_max_coalesced_frames;
+ adapter->ahw->coal.flag = 0;
+ adapter->ahw->coal.rx_time_us = ethcoal->rx_coalesce_usecs;
+ adapter->ahw->coal.rx_packets =
+ ethcoal->rx_max_coalesced_frames;
}
- adapter->coal.normal.data.tx_time_us = ethcoal->tx_coalesce_usecs;
- adapter->coal.normal.data.tx_packets =
- ethcoal->tx_max_coalesced_frames;
qlcnic_config_intr_coalesce(adapter);
@@ -988,50 +945,8 @@
if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
return -EINVAL;
- ethcoal->rx_coalesce_usecs = adapter->coal.normal.data.rx_time_us;
- ethcoal->tx_coalesce_usecs = adapter->coal.normal.data.tx_time_us;
- ethcoal->rx_max_coalesced_frames =
- adapter->coal.normal.data.rx_packets;
- ethcoal->tx_max_coalesced_frames =
- adapter->coal.normal.data.tx_packets;
-
- return 0;
-}
-
-static int qlcnic_set_flags(struct net_device *netdev, u32 data)
-{
- struct qlcnic_adapter *adapter = netdev_priv(netdev);
- int hw_lro;
-
- if (ethtool_invalid_flags(netdev, data, ETH_FLAG_LRO))
- return -EINVAL;
-
- if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO))
- return -EINVAL;
-
- if (!adapter->rx_csum) {
- dev_info(&adapter->pdev->dev, "rx csum is off, "
- "cannot toggle lro\n");
- return -EINVAL;
- }
-
- if ((data & ETH_FLAG_LRO) && (netdev->features & NETIF_F_LRO))
- return 0;
-
- if (data & ETH_FLAG_LRO) {
- hw_lro = QLCNIC_LRO_ENABLED;
- netdev->features |= NETIF_F_LRO;
- } else {
- hw_lro = 0;
- netdev->features &= ~NETIF_F_LRO;
- }
-
- if (qlcnic_config_hw_lro(adapter, hw_lro))
- return -EIO;
-
- if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
- return -EIO;
-
+ ethcoal->rx_coalesce_usecs = adapter->ahw->coal.rx_time_us;
+ ethcoal->rx_max_coalesced_frames = adapter->ahw->coal.rx_packets;
return 0;
}
@@ -1050,6 +965,84 @@
adapter->msg_enable = msglvl;
}
+static int
+qlcnic_get_dump_flag(struct net_device *netdev, struct ethtool_dump *dump)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+
+ dump->len = fw_dump->tmpl_hdr->size + fw_dump->size;
+ dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
+ dump->version = adapter->fw_version;
+ return 0;
+}
+
+static int
+qlcnic_get_dump_data(struct net_device *netdev, struct ethtool_dump *dump,
+ void *buffer)
+{
+ int i, copy_sz;
+ u32 *hdr_ptr, *data;
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+
+ if (qlcnic_api_lock(adapter))
+ return -EIO;
+ if (!fw_dump->clr) {
+ netdev_info(netdev, "Dump not available\n");
+ qlcnic_api_unlock(adapter);
+ return -EINVAL;
+ }
+ /* Copy template header first */
+ copy_sz = fw_dump->tmpl_hdr->size;
+ hdr_ptr = (u32 *) fw_dump->tmpl_hdr;
+ data = (u32 *) buffer;
+ for (i = 0; i < copy_sz/sizeof(u32); i++)
+ *data++ = cpu_to_le32(*hdr_ptr++);
+
+ /* Copy captured dump data */
+ memcpy(buffer + copy_sz, fw_dump->data, fw_dump->size);
+ dump->len = copy_sz + fw_dump->size;
+ dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
+
+ /* Free dump area once data has been captured */
+ vfree(fw_dump->data);
+ fw_dump->data = NULL;
+ fw_dump->clr = 0;
+ qlcnic_api_unlock(adapter);
+
+ return 0;
+}
+
+static int
+qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
+{
+ int ret = 0;
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+
+ if (val->flag == QLCNIC_FORCE_FW_DUMP_KEY) {
+ netdev_info(netdev, "Forcing a FW dump\n");
+ qlcnic_dev_request_reset(adapter);
+ } else {
+ if (val->flag > QLCNIC_DUMP_MASK_MAX ||
+ val->flag < QLCNIC_DUMP_MASK_MIN) {
+ netdev_info(netdev,
+ "Invalid dump level: 0x%x\n", val->flag);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (qlcnic_api_lock(adapter))
+ return -EIO;
+ fw_dump->tmpl_hdr->drv_cap_mask = val->flag & 0xff;
+ qlcnic_api_unlock(adapter);
+ netdev_info(netdev, "Driver mask changed to: 0x%x\n",
+ fw_dump->tmpl_hdr->drv_cap_mask);
+ }
+out:
+ return ret;
+}
+
const struct ethtool_ops qlcnic_ethtool_ops = {
.get_settings = qlcnic_get_settings,
.set_settings = qlcnic_set_settings,
@@ -1061,26 +1054,22 @@
.get_eeprom = qlcnic_get_eeprom,
.get_ringparam = qlcnic_get_ringparam,
.set_ringparam = qlcnic_set_ringparam,
+ .get_channels = qlcnic_get_channels,
+ .set_channels = qlcnic_set_channels,
.get_pauseparam = qlcnic_get_pauseparam,
.set_pauseparam = qlcnic_set_pauseparam,
- .get_tx_csum = qlcnic_get_tx_csum,
- .set_tx_csum = qlcnic_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .get_tso = qlcnic_get_tso,
- .set_tso = qlcnic_set_tso,
.get_wol = qlcnic_get_wol,
.set_wol = qlcnic_set_wol,
.self_test = qlcnic_diag_test,
.get_strings = qlcnic_get_strings,
.get_ethtool_stats = qlcnic_get_ethtool_stats,
.get_sset_count = qlcnic_get_sset_count,
- .get_rx_csum = qlcnic_get_rx_csum,
- .set_rx_csum = qlcnic_set_rx_csum,
.get_coalesce = qlcnic_get_intr_coalesce,
.set_coalesce = qlcnic_set_intr_coalesce,
- .get_flags = ethtool_op_get_flags,
- .set_flags = qlcnic_set_flags,
- .phys_id = qlcnic_blink_led,
+ .set_phys_id = qlcnic_set_led,
.set_msglevel = qlcnic_set_msglevel,
.get_msglevel = qlcnic_get_msglevel,
+ .get_dump_flag = qlcnic_get_dump_flag,
+ .get_dump_data = qlcnic_get_dump_data,
+ .set_dump = qlcnic_set_dump,
};
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/qlcnic/qlcnic_hdr.h
index 726ef55..d14506f 100644
--- a/drivers/net/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/qlcnic/qlcnic_hdr.h
@@ -492,10 +492,10 @@
#define TEST_AGT_CTRL (0x00)
-#define TA_CTL_START 1
-#define TA_CTL_ENABLE 2
-#define TA_CTL_WRITE 4
-#define TA_CTL_BUSY 8
+#define TA_CTL_START BIT_0
+#define TA_CTL_ENABLE BIT_1
+#define TA_CTL_WRITE BIT_2
+#define TA_CTL_BUSY BIT_3
/*
* Register offsets for MN
@@ -765,6 +765,38 @@
#define QLCNIC_MAX_PCI_FUNC 8
#define QLCNIC_MAX_VLAN_FILTERS 64
+/* FW dump defines */
+#define MIU_TEST_CTR 0x41000090
+#define MIU_TEST_ADDR_LO 0x41000094
+#define MIU_TEST_ADDR_HI 0x41000098
+#define FLASH_ROM_WINDOW 0x42110030
+#define FLASH_ROM_DATA 0x42150000
+
+static const u32 MIU_TEST_READ_DATA[] = {
+ 0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC, };
+
+#define QLCNIC_FW_DUMP_REG1 0x00130060
+#define QLCNIC_FW_DUMP_REG2 0x001e0000
+#define QLCNIC_FLASH_SEM2_LK 0x0013C010
+#define QLCNIC_FLASH_SEM2_ULK 0x0013C014
+#define QLCNIC_FLASH_LOCK_ID 0x001B2100
+
+#define QLCNIC_RD_DUMP_REG(addr, bar0, data) do { \
+ writel((addr & 0xFFFF0000), (void *) (bar0 + \
+ QLCNIC_FW_DUMP_REG1)); \
+ readl((void *) (bar0 + QLCNIC_FW_DUMP_REG1)); \
+ *data = readl((void *) (bar0 + QLCNIC_FW_DUMP_REG2 + \
+ LSW(addr))); \
+} while (0)
+
+#define QLCNIC_WR_DUMP_REG(addr, bar0, data) do { \
+ writel((addr & 0xFFFF0000), (void *) (bar0 + \
+ QLCNIC_FW_DUMP_REG1)); \
+ readl((void *) (bar0 + QLCNIC_FW_DUMP_REG1)); \
+ writel(data, (void *) (bar0 + QLCNIC_FW_DUMP_REG2 + LSW(addr)));\
+ readl((void *) (bar0 + QLCNIC_FW_DUMP_REG2 + LSW(addr))); \
+} while (0)
+
/* PCI function operational mode */
enum {
QLCNIC_MGMT_FUNC = 0,
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 616940f..e965661 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -9,6 +9,7 @@
#include <linux/slab.h>
#include <net/ip.h>
+#include <linux/bitops.h>
#define MASK(n) ((1ULL<<(n))-1)
#define OCM_WIN_P3P(addr) (addr & 0xffc0000)
@@ -457,7 +458,7 @@
req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
- word = QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+ word = QLCNIC_H2C_OPCODE_SET_MAC_RECEIVE_MODE |
((u64)adapter->portnum << 16);
req.req_hdr = cpu_to_le64(word);
@@ -532,33 +533,31 @@
}
}
-#define QLCNIC_CONFIG_INTR_COALESCE 3
-
/*
* Send the interrupt coalescing parameter set by ethtool to the card.
*/
int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter)
{
struct qlcnic_nic_req req;
- u64 word[6];
- int rv, i;
+ int rv;
memset(&req, 0, sizeof(struct qlcnic_nic_req));
req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
- word[0] = QLCNIC_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
- req.req_hdr = cpu_to_le64(word[0]);
+ req.req_hdr = cpu_to_le64(QLCNIC_CONFIG_INTR_COALESCE |
+ ((u64) adapter->portnum << 16));
- memcpy(&word[0], &adapter->coal, sizeof(adapter->coal));
- for (i = 0; i < 6; i++)
- req.words[i] = cpu_to_le64(word[i]);
-
+ req.words[0] = cpu_to_le64(((u64) adapter->ahw->coal.flag) << 32);
+ req.words[2] = cpu_to_le64(adapter->ahw->coal.rx_packets |
+ ((u64) adapter->ahw->coal.rx_time_us) << 16);
+ req.words[5] = cpu_to_le64(adapter->ahw->coal.timer_out |
+ ((u64) adapter->ahw->coal.type) << 32 |
+ ((u64) adapter->ahw->coal.sts_ring_mask) << 40);
rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0)
dev_err(&adapter->netdev->dev,
"Could not send interrupt coalescing parameters\n");
-
return rv;
}
@@ -568,6 +567,9 @@
u64 word;
int rv;
+ if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
+ return 0;
+
memset(&req, 0, sizeof(struct qlcnic_nic_req));
req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -713,6 +715,9 @@
u64 word;
int rv;
+ if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
+ return 0;
+
memset(&req, 0, sizeof(struct qlcnic_nic_req));
req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -754,6 +759,43 @@
return rc;
}
+
+u32 qlcnic_fix_features(struct net_device *netdev, u32 features)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+ if ((adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+ u32 changed = features ^ netdev->features;
+ features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
+ }
+
+ if (!(features & NETIF_F_RXCSUM))
+ features &= ~NETIF_F_LRO;
+
+ return features;
+}
+
+
+int qlcnic_set_features(struct net_device *netdev, u32 features)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ u32 changed = netdev->features ^ features;
+ int hw_lro = (features & NETIF_F_LRO) ? QLCNIC_LRO_ENABLED : 0;
+
+ if (!(changed & NETIF_F_LRO))
+ return 0;
+
+ netdev->features = features ^ NETIF_F_LRO;
+
+ if (qlcnic_config_hw_lro(adapter, hw_lro))
+ return -EIO;
+
+ if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
+ return -EIO;
+
+ return 0;
+}
+
/*
* Changes the CRB window to the specified window.
*/
@@ -780,7 +822,7 @@
m = &crb_128M_2M_map[CRB_BLK(off)].sub_block[CRB_SUBBLK(off)];
if (m->valid && (m->start_128M <= off) && (m->end_128M > off)) {
- *addr = adapter->ahw.pci_base0 + m->start_2M +
+ *addr = adapter->ahw->pci_base0 + m->start_2M +
(off - m->start_128M);
return 0;
}
@@ -788,7 +830,7 @@
/*
* Not in direct map, use crb window
*/
- *addr = adapter->ahw.pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
+ *addr = adapter->ahw->pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
return 1;
}
@@ -801,7 +843,7 @@
qlcnic_pci_set_crbwindow_2M(struct qlcnic_adapter *adapter, ulong off)
{
u32 window;
- void __iomem *addr = adapter->ahw.pci_base0 + CRB_WINDOW_2M;
+ void __iomem *addr = adapter->ahw->pci_base0 + CRB_WINDOW_2M;
off -= QLCNIC_PCI_CRBSPACE;
@@ -838,13 +880,13 @@
if (rv > 0) {
/* indirect access */
- write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+ write_lock_irqsave(&adapter->ahw->crb_lock, flags);
crb_win_lock(adapter);
rv = qlcnic_pci_set_crbwindow_2M(adapter, off);
if (!rv)
writel(data, addr);
crb_win_unlock(adapter);
- write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+ write_unlock_irqrestore(&adapter->ahw->crb_lock, flags);
return rv;
}
@@ -869,12 +911,12 @@
if (rv > 0) {
/* indirect access */
- write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+ write_lock_irqsave(&adapter->ahw->crb_lock, flags);
crb_win_lock(adapter);
if (!qlcnic_pci_set_crbwindow_2M(adapter, off))
data = readl(addr);
crb_win_unlock(adapter);
- write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+ write_unlock_irqrestore(&adapter->ahw->crb_lock, flags);
return data;
}
@@ -904,9 +946,9 @@
window = OCM_WIN_P3P(addr);
- writel(window, adapter->ahw.ocm_win_crb);
+ writel(window, adapter->ahw->ocm_win_crb);
/* read back to flush */
- readl(adapter->ahw.ocm_win_crb);
+ readl(adapter->ahw->ocm_win_crb);
*start = QLCNIC_PCI_OCM0_2M + GET_MEM_OFFS_2M(addr);
return 0;
@@ -920,13 +962,13 @@
int ret;
u32 start;
- mutex_lock(&adapter->ahw.mem_lock);
+ mutex_lock(&adapter->ahw->mem_lock);
ret = qlcnic_pci_set_window_2M(adapter, off, &start);
if (ret != 0)
goto unlock;
- addr = adapter->ahw.pci_base0 + start;
+ addr = adapter->ahw->pci_base0 + start;
if (op == 0) /* read */
*data = readq(addr);
@@ -934,7 +976,7 @@
writeq(*data, addr);
unlock:
- mutex_unlock(&adapter->ahw.mem_lock);
+ mutex_unlock(&adapter->ahw->mem_lock);
return ret;
}
@@ -942,23 +984,23 @@
void
qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *adapter, u64 off, u64 *data)
{
- void __iomem *addr = adapter->ahw.pci_base0 +
+ void __iomem *addr = adapter->ahw->pci_base0 +
QLCNIC_PCI_CAMQM_2M_BASE + (off - QLCNIC_PCI_CAMQM);
- mutex_lock(&adapter->ahw.mem_lock);
+ mutex_lock(&adapter->ahw->mem_lock);
*data = readq(addr);
- mutex_unlock(&adapter->ahw.mem_lock);
+ mutex_unlock(&adapter->ahw->mem_lock);
}
void
qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *adapter, u64 off, u64 data)
{
- void __iomem *addr = adapter->ahw.pci_base0 +
+ void __iomem *addr = adapter->ahw->pci_base0 +
QLCNIC_PCI_CAMQM_2M_BASE + (off - QLCNIC_PCI_CAMQM);
- mutex_lock(&adapter->ahw.mem_lock);
+ mutex_lock(&adapter->ahw->mem_lock);
writeq(data, addr);
- mutex_unlock(&adapter->ahw.mem_lock);
+ mutex_unlock(&adapter->ahw->mem_lock);
}
#define MAX_CTL_CHECK 1000
@@ -997,7 +1039,7 @@
correct:
off8 = off & ~0xf;
- mutex_lock(&adapter->ahw.mem_lock);
+ mutex_lock(&adapter->ahw->mem_lock);
writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
@@ -1049,7 +1091,7 @@
ret = 0;
done:
- mutex_unlock(&adapter->ahw.mem_lock);
+ mutex_unlock(&adapter->ahw->mem_lock);
return ret;
}
@@ -1091,7 +1133,7 @@
correct:
off8 = off & ~0xf;
- mutex_lock(&adapter->ahw.mem_lock);
+ mutex_lock(&adapter->ahw->mem_lock);
writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
@@ -1121,7 +1163,7 @@
ret = 0;
}
- mutex_unlock(&adapter->ahw.mem_lock);
+ mutex_unlock(&adapter->ahw->mem_lock);
return ret;
}
@@ -1145,7 +1187,7 @@
if (qlcnic_rom_fast_read(adapter, offset, &board_type))
return -EIO;
- adapter->ahw.board_type = board_type;
+ adapter->ahw->board_type = board_type;
if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
@@ -1164,20 +1206,20 @@
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
case QLCNIC_BRDTYPE_P3P_10G_XFP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
- adapter->ahw.port_type = QLCNIC_XGBE;
+ adapter->ahw->port_type = QLCNIC_XGBE;
break;
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
- adapter->ahw.port_type = QLCNIC_GBE;
+ adapter->ahw->port_type = QLCNIC_GBE;
break;
case QLCNIC_BRDTYPE_P3P_10G_TP:
- adapter->ahw.port_type = (adapter->portnum < 2) ?
+ adapter->ahw->port_type = (adapter->portnum < 2) ?
QLCNIC_XGBE : QLCNIC_GBE;
break;
default:
dev_err(&pdev->dev, "unknown board type %x\n", board_type);
- adapter->ahw.port_type = QLCNIC_XGBE;
+ adapter->ahw->port_type = QLCNIC_XGBE;
break;
}
@@ -1220,3 +1262,461 @@
return rv;
}
+
+/* FW dump related functions */
+static u32
+qlcnic_dump_crb(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+ u32 *buffer)
+{
+ int i;
+ u32 addr, data;
+ struct __crb *crb = &entry->region.crb;
+ void __iomem *base = adapter->ahw->pci_base0;
+
+ addr = crb->addr;
+
+ for (i = 0; i < crb->no_ops; i++) {
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ *buffer++ = cpu_to_le32(addr);
+ *buffer++ = cpu_to_le32(data);
+ addr += crb->stride;
+ }
+ return crb->no_ops * 2 * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_ctrl(struct qlcnic_adapter *adapter,
+ struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+ int i, k, timeout = 0;
+ void __iomem *base = adapter->ahw->pci_base0;
+ u32 addr, data;
+ u8 opcode, no_ops;
+ struct __ctrl *ctr = &entry->region.ctrl;
+ struct qlcnic_dump_template_hdr *t_hdr = adapter->ahw->fw_dump.tmpl_hdr;
+
+ addr = ctr->addr;
+ no_ops = ctr->no_ops;
+
+ for (i = 0; i < no_ops; i++) {
+ k = 0;
+ opcode = 0;
+ for (k = 0; k < 8; k++) {
+ if (!(ctr->opcode & (1 << k)))
+ continue;
+ switch (1 << k) {
+ case QLCNIC_DUMP_WCRB:
+ QLCNIC_WR_DUMP_REG(addr, base, ctr->val1);
+ break;
+ case QLCNIC_DUMP_RWCRB:
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ QLCNIC_WR_DUMP_REG(addr, base, data);
+ break;
+ case QLCNIC_DUMP_ANDCRB:
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ QLCNIC_WR_DUMP_REG(addr, base,
+ (data & ctr->val2));
+ break;
+ case QLCNIC_DUMP_ORCRB:
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ QLCNIC_WR_DUMP_REG(addr, base,
+ (data | ctr->val3));
+ break;
+ case QLCNIC_DUMP_POLLCRB:
+ while (timeout <= ctr->timeout) {
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ if ((data & ctr->val2) == ctr->val1)
+ break;
+ msleep(1);
+ timeout++;
+ }
+ if (timeout > ctr->timeout) {
+ dev_info(&adapter->pdev->dev,
+ "Timed out, aborting poll CRB\n");
+ return -EINVAL;
+ }
+ break;
+ case QLCNIC_DUMP_RD_SAVE:
+ if (ctr->index_a)
+ addr = t_hdr->saved_state[ctr->index_a];
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ t_hdr->saved_state[ctr->index_v] = data;
+ break;
+ case QLCNIC_DUMP_WRT_SAVED:
+ if (ctr->index_v)
+ data = t_hdr->saved_state[ctr->index_v];
+ else
+ data = ctr->val1;
+ if (ctr->index_a)
+ addr = t_hdr->saved_state[ctr->index_a];
+ QLCNIC_WR_DUMP_REG(addr, base, data);
+ break;
+ case QLCNIC_DUMP_MOD_SAVE_ST:
+ data = t_hdr->saved_state[ctr->index_v];
+ data <<= ctr->shl_val;
+ data >>= ctr->shr_val;
+ if (ctr->val2)
+ data &= ctr->val2;
+ data |= ctr->val3;
+ data += ctr->val1;
+ t_hdr->saved_state[ctr->index_v] = data;
+ break;
+ default:
+ dev_info(&adapter->pdev->dev,
+ "Unknown opcode\n");
+ break;
+ }
+ }
+ addr += ctr->stride;
+ }
+ return 0;
+}
+
+static u32
+qlcnic_dump_mux(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+ u32 *buffer)
+{
+ int loop;
+ u32 val, data = 0;
+ struct __mux *mux = &entry->region.mux;
+ void __iomem *base = adapter->ahw->pci_base0;
+
+ val = mux->val;
+ for (loop = 0; loop < mux->no_ops; loop++) {
+ QLCNIC_WR_DUMP_REG(mux->addr, base, val);
+ QLCNIC_RD_DUMP_REG(mux->read_addr, base, &data);
+ *buffer++ = cpu_to_le32(val);
+ *buffer++ = cpu_to_le32(data);
+ val += mux->val_stride;
+ }
+ return 2 * mux->no_ops * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_que(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+ u32 *buffer)
+{
+ int i, loop;
+ u32 cnt, addr, data, que_id = 0;
+ void __iomem *base = adapter->ahw->pci_base0;
+ struct __queue *que = &entry->region.que;
+
+ addr = que->read_addr;
+ cnt = que->read_addr_cnt;
+
+ for (loop = 0; loop < que->no_ops; loop++) {
+ QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+ for (i = 0; i < cnt; i++) {
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ *buffer++ = cpu_to_le32(data);
+ addr += que->read_addr_stride;
+ }
+ que_id += que->stride;
+ }
+ return que->no_ops * cnt * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_ocm(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+ u32 *buffer)
+{
+ int i;
+ u32 data;
+ void __iomem *addr;
+ struct __ocm *ocm = &entry->region.ocm;
+
+ addr = adapter->ahw->pci_base0 + ocm->read_addr;
+ for (i = 0; i < ocm->no_ops; i++) {
+ data = readl(addr);
+ *buffer++ = cpu_to_le32(data);
+ addr += ocm->read_addr_stride;
+ }
+ return ocm->no_ops * sizeof(u32);
+}
+
+static u32
+qlcnic_read_rom(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+ u32 *buffer)
+{
+ int i, count = 0;
+ u32 fl_addr, size, val, lck_val, addr;
+ struct __mem *rom = &entry->region.mem;
+ void __iomem *base = adapter->ahw->pci_base0;
+
+ fl_addr = rom->addr;
+ size = rom->size/4;
+lock_try:
+ lck_val = readl(base + QLCNIC_FLASH_SEM2_LK);
+ if (!lck_val && count < MAX_CTL_CHECK) {
+ msleep(10);
+ count++;
+ goto lock_try;
+ }
+ writel(adapter->ahw->pci_func, (base + QLCNIC_FLASH_LOCK_ID));
+ for (i = 0; i < size; i++) {
+ addr = fl_addr & 0xFFFF0000;
+ QLCNIC_WR_DUMP_REG(FLASH_ROM_WINDOW, base, addr);
+ addr = LSW(fl_addr) + FLASH_ROM_DATA;
+ QLCNIC_RD_DUMP_REG(addr, base, &val);
+ fl_addr += 4;
+ *buffer++ = cpu_to_le32(val);
+ }
+ readl(base + QLCNIC_FLASH_SEM2_ULK);
+ return rom->size;
+}
+
+static u32
+qlcnic_dump_l1_cache(struct qlcnic_adapter *adapter,
+ struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+ int i;
+ u32 cnt, val, data, addr;
+ void __iomem *base = adapter->ahw->pci_base0;
+ struct __cache *l1 = &entry->region.cache;
+
+ val = l1->init_tag_val;
+
+ for (i = 0; i < l1->no_ops; i++) {
+ QLCNIC_WR_DUMP_REG(l1->addr, base, val);
+ QLCNIC_WR_DUMP_REG(l1->ctrl_addr, base, LSW(l1->ctrl_val));
+ addr = l1->read_addr;
+ cnt = l1->read_addr_num;
+ while (cnt) {
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ *buffer++ = cpu_to_le32(data);
+ addr += l1->read_addr_stride;
+ cnt--;
+ }
+ val += l1->stride;
+ }
+ return l1->no_ops * l1->read_addr_num * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_l2_cache(struct qlcnic_adapter *adapter,
+ struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+ int i;
+ u32 cnt, val, data, addr;
+ u8 poll_mask, poll_to, time_out = 0;
+ void __iomem *base = adapter->ahw->pci_base0;
+ struct __cache *l2 = &entry->region.cache;
+
+ val = l2->init_tag_val;
+ poll_mask = LSB(MSW(l2->ctrl_val));
+ poll_to = MSB(MSW(l2->ctrl_val));
+
+ for (i = 0; i < l2->no_ops; i++) {
+ QLCNIC_WR_DUMP_REG(l2->addr, base, val);
+ do {
+ QLCNIC_WR_DUMP_REG(l2->ctrl_addr, base,
+ LSW(l2->ctrl_val));
+ QLCNIC_RD_DUMP_REG(l2->ctrl_addr, base, &data);
+ if (!(data & poll_mask))
+ break;
+ msleep(1);
+ time_out++;
+ } while (time_out <= poll_to);
+ if (time_out > poll_to)
+ return -EINVAL;
+
+ addr = l2->read_addr;
+ cnt = l2->read_addr_num;
+ while (cnt) {
+ QLCNIC_RD_DUMP_REG(addr, base, &data);
+ *buffer++ = cpu_to_le32(data);
+ addr += l2->read_addr_stride;
+ cnt--;
+ }
+ val += l2->stride;
+ }
+ return l2->no_ops * l2->read_addr_num * sizeof(u32);
+}
+
+static u32
+qlcnic_read_memory(struct qlcnic_adapter *adapter,
+ struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+ u32 addr, data, test, ret = 0;
+ int i, reg_read;
+ struct __mem *mem = &entry->region.mem;
+ void __iomem *base = adapter->ahw->pci_base0;
+
+ reg_read = mem->size;
+ addr = mem->addr;
+ /* check for data size of multiple of 16 and 16 byte alignment */
+ if ((addr & 0xf) || (reg_read%16)) {
+ dev_info(&adapter->pdev->dev,
+ "Unaligned memory addr:0x%x size:0x%x\n",
+ addr, reg_read);
+ return -EINVAL;
+ }
+
+ mutex_lock(&adapter->ahw->mem_lock);
+
+ while (reg_read != 0) {
+ QLCNIC_WR_DUMP_REG(MIU_TEST_ADDR_LO, base, addr);
+ QLCNIC_WR_DUMP_REG(MIU_TEST_ADDR_HI, base, 0);
+ QLCNIC_WR_DUMP_REG(MIU_TEST_CTR, base,
+ TA_CTL_ENABLE | TA_CTL_START);
+
+ for (i = 0; i < MAX_CTL_CHECK; i++) {
+ QLCNIC_RD_DUMP_REG(MIU_TEST_CTR, base, &test);
+ if (!(test & TA_CTL_BUSY))
+ break;
+ }
+ if (i == MAX_CTL_CHECK) {
+ if (printk_ratelimit()) {
+ dev_err(&adapter->pdev->dev,
+ "failed to read through agent\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+ for (i = 0; i < 4; i++) {
+ QLCNIC_RD_DUMP_REG(MIU_TEST_READ_DATA[i], base, &data);
+ *buffer++ = cpu_to_le32(data);
+ }
+ addr += 16;
+ reg_read -= 16;
+ ret += 16;
+ }
+out:
+ mutex_unlock(&adapter->ahw->mem_lock);
+ return mem->size;
+}
+
+static u32
+qlcnic_dump_nop(struct qlcnic_adapter *adapter,
+ struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+ entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+ return 0;
+}
+
+struct qlcnic_dump_operations fw_dump_ops[] = {
+ { QLCNIC_DUMP_NOP, qlcnic_dump_nop },
+ { QLCNIC_DUMP_READ_CRB, qlcnic_dump_crb },
+ { QLCNIC_DUMP_READ_MUX, qlcnic_dump_mux },
+ { QLCNIC_DUMP_QUEUE, qlcnic_dump_que },
+ { QLCNIC_DUMP_BRD_CONFIG, qlcnic_read_rom },
+ { QLCNIC_DUMP_READ_OCM, qlcnic_dump_ocm },
+ { QLCNIC_DUMP_PEG_REG, qlcnic_dump_ctrl },
+ { QLCNIC_DUMP_L1_DTAG, qlcnic_dump_l1_cache },
+ { QLCNIC_DUMP_L1_ITAG, qlcnic_dump_l1_cache },
+ { QLCNIC_DUMP_L1_DATA, qlcnic_dump_l1_cache },
+ { QLCNIC_DUMP_L1_INST, qlcnic_dump_l1_cache },
+ { QLCNIC_DUMP_L2_DTAG, qlcnic_dump_l2_cache },
+ { QLCNIC_DUMP_L2_ITAG, qlcnic_dump_l2_cache },
+ { QLCNIC_DUMP_L2_DATA, qlcnic_dump_l2_cache },
+ { QLCNIC_DUMP_L2_INST, qlcnic_dump_l2_cache },
+ { QLCNIC_DUMP_READ_ROM, qlcnic_read_rom },
+ { QLCNIC_DUMP_READ_MEM, qlcnic_read_memory },
+ { QLCNIC_DUMP_READ_CTRL, qlcnic_dump_ctrl },
+ { QLCNIC_DUMP_TLHDR, qlcnic_dump_nop },
+ { QLCNIC_DUMP_RDEND, qlcnic_dump_nop },
+};
+
+/* Walk the template and collect dump for each entry in the dump template */
+static int
+qlcnic_valid_dump_entry(struct device *dev, struct qlcnic_dump_entry *entry,
+ u32 size)
+{
+ int ret = 1;
+ if (size != entry->hdr.cap_size) {
+ dev_info(dev,
+ "Invalidate dump, Type:%d\tMask:%d\tSize:%dCap_size:%d\n",
+ entry->hdr.type, entry->hdr.mask, size, entry->hdr.cap_size);
+ dev_info(dev, "Aborting further dump capture\n");
+ ret = 0;
+ }
+ return ret;
+}
+
+int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
+{
+ u32 *buffer;
+ char mesg[64];
+ char *msg[] = {mesg, NULL};
+ int i, k, ops_cnt, ops_index, dump_size = 0;
+ u32 entry_offset, dump, no_entries, buf_offset = 0;
+ struct qlcnic_dump_entry *entry;
+ struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+ struct qlcnic_dump_template_hdr *tmpl_hdr = fw_dump->tmpl_hdr;
+
+ if (fw_dump->clr) {
+ dev_info(&adapter->pdev->dev,
+ "Previous dump not cleared, not capturing dump\n");
+ return -EIO;
+ }
+ /* Calculate the size for dump data area only */
+ for (i = 2, k = 1; (i & QLCNIC_DUMP_MASK_MAX); i <<= 1, k++)
+ if (i & tmpl_hdr->drv_cap_mask)
+ dump_size += tmpl_hdr->cap_sizes[k];
+ if (!dump_size)
+ return -EIO;
+
+ fw_dump->data = vzalloc(dump_size);
+ if (!fw_dump->data) {
+ dev_info(&adapter->pdev->dev,
+ "Unable to allocate (%d KB) for fw dump\n",
+ dump_size/1024);
+ return -ENOMEM;
+ }
+ buffer = fw_dump->data;
+ fw_dump->size = dump_size;
+ no_entries = tmpl_hdr->num_entries;
+ ops_cnt = ARRAY_SIZE(fw_dump_ops);
+ entry_offset = tmpl_hdr->offset;
+ tmpl_hdr->sys_info[0] = QLCNIC_DRIVER_VERSION;
+ tmpl_hdr->sys_info[1] = adapter->fw_version;
+
+ for (i = 0; i < no_entries; i++) {
+ entry = (struct qlcnic_dump_entry *) ((void *) tmpl_hdr +
+ entry_offset);
+ if (!(entry->hdr.mask & tmpl_hdr->drv_cap_mask)) {
+ entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+ entry_offset += entry->hdr.offset;
+ continue;
+ }
+ /* Find the handler for this entry */
+ ops_index = 0;
+ while (ops_index < ops_cnt) {
+ if (entry->hdr.type == fw_dump_ops[ops_index].opcode)
+ break;
+ ops_index++;
+ }
+ if (ops_index == ops_cnt) {
+ dev_info(&adapter->pdev->dev,
+ "Invalid entry type %d, exiting dump\n",
+ entry->hdr.type);
+ goto error;
+ }
+ /* Collect dump for this entry */
+ dump = fw_dump_ops[ops_index].handler(adapter, entry, buffer);
+ if (dump && !qlcnic_valid_dump_entry(&adapter->pdev->dev, entry,
+ dump))
+ entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+ buf_offset += entry->hdr.cap_size;
+ entry_offset += entry->hdr.offset;
+ buffer = fw_dump->data + buf_offset;
+ }
+ if (dump_size != buf_offset) {
+ dev_info(&adapter->pdev->dev,
+ "Captured(%d) and expected size(%d) do not match\n",
+ buf_offset, dump_size);
+ goto error;
+ } else {
+ fw_dump->clr = 1;
+ snprintf(mesg, sizeof(mesg), "FW dump for device: %d\n",
+ adapter->pdev->devfn);
+ dev_info(&adapter->pdev->dev, "Dump data, %d bytes captured\n",
+ fw_dump->size);
+ /* Send a udev event to notify availability of FW dump */
+ kobject_uevent_env(&adapter->pdev->dev.kobj, KOBJ_CHANGE, msg);
+ return 0;
+ }
+error:
+ vfree(fw_dump->data);
+ return -EINVAL;
+}
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index a7f1d5b..5b8bbcf 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -94,7 +94,7 @@
struct qlcnic_rx_buffer *rx_buf;
int i, ring;
- recv_ctx = &adapter->recv_ctx;
+ recv_ctx = adapter->recv_ctx;
for (ring = 0; ring < adapter->max_rds_rings; ring++) {
rds_ring = &recv_ctx->rds_rings[ring];
for (i = 0; i < rds_ring->num_desc; ++i) {
@@ -119,7 +119,7 @@
struct qlcnic_rx_buffer *rx_buf;
int i, ring;
- recv_ctx = &adapter->recv_ctx;
+ recv_ctx = adapter->recv_ctx;
for (ring = 0; ring < adapter->max_rds_rings; ring++) {
rds_ring = &recv_ctx->rds_rings[ring];
@@ -173,7 +173,7 @@
struct qlcnic_host_tx_ring *tx_ring;
int ring;
- recv_ctx = &adapter->recv_ctx;
+ recv_ctx = adapter->recv_ctx;
if (recv_ctx->rds_rings == NULL)
goto skip_rds;
@@ -226,7 +226,7 @@
}
tx_ring->cmd_buf_arr = cmd_buf_arr;
- recv_ctx = &adapter->recv_ctx;
+ recv_ctx = adapter->recv_ctx;
size = adapter->max_rds_rings * sizeof(struct qlcnic_host_rds_ring);
rds_ring = kzalloc(size, GFP_KERNEL);
@@ -345,7 +345,7 @@
}
static int do_rom_fast_read(struct qlcnic_adapter *adapter,
- int addr, int *valp)
+ u32 addr, u32 *valp)
{
QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ADDRESS, addr);
QLCWR32(adapter, QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
@@ -398,7 +398,7 @@
return ret;
}
-int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp)
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, u32 addr, u32 *valp)
{
int ret;
@@ -864,7 +864,7 @@
for (i = 0; i < entries; i++) {
__le32 flags, file_chiprev, offs;
- u8 chiprev = adapter->ahw.revision_id;
+ u8 chiprev = adapter->ahw->revision_id;
u32 flagbit;
offs = cpu_to_le32(ptab_descr->findex) +
@@ -1130,9 +1130,20 @@
} else {
u64 data;
u32 hi, lo;
+ int ret;
+ struct qlcnic_flt_entry bootld_entry;
- size = (QLCNIC_IMAGE_START - QLCNIC_BOOTLD_START) / 8;
- flashaddr = QLCNIC_BOOTLD_START;
+ ret = qlcnic_get_flt_entry(adapter, QLCNIC_BOOTLD_REGION,
+ &bootld_entry);
+ if (!ret) {
+ size = bootld_entry.size / 8;
+ flashaddr = bootld_entry.start_addr;
+ } else {
+ size = (QLCNIC_IMAGE_START - QLCNIC_BOOTLD_START) / 8;
+ flashaddr = QLCNIC_BOOTLD_START;
+ dev_info(&pdev->dev,
+ "using legacy method to get flash fw region");
+ }
for (i = 0; i < size; i++) {
if (qlcnic_rom_fast_read(adapter,
@@ -1379,8 +1390,8 @@
skb = buffer->skb;
- if (likely(adapter->rx_csum && (cksum == STATUS_CKSUM_OK ||
- cksum == STATUS_CKSUM_LOOP))) {
+ if (likely((adapter->netdev->features & NETIF_F_RXCSUM) &&
+ (cksum == STATUS_CKSUM_OK || cksum == STATUS_CKSUM_LOOP))) {
adapter->stats.csummed++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else {
@@ -1394,7 +1405,7 @@
return skb;
}
-static int
+static inline int
qlcnic_check_rx_tagging(struct qlcnic_adapter *adapter, struct sk_buff *skb,
u16 *vlan_tag)
{
@@ -1425,7 +1436,7 @@
int ring, u64 sts_data0)
{
struct net_device *netdev = adapter->netdev;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
struct qlcnic_rx_buffer *buffer;
struct sk_buff *skb;
struct qlcnic_host_rds_ring *rds_ring;
@@ -1467,10 +1478,10 @@
skb->protocol = eth_type_trans(skb, netdev);
- if ((vid != 0xffff) && adapter->vlgrp)
- vlan_gro_receive(&sds_ring->napi, adapter->vlgrp, vid, skb);
- else
- napi_gro_receive(&sds_ring->napi, skb);
+ if (vid != 0xffff)
+ __vlan_hwaccel_put_tag(skb, vid);
+
+ napi_gro_receive(&sds_ring->napi, skb);
adapter->stats.rx_pkts++;
adapter->stats.rxbytes += length;
@@ -1488,7 +1499,7 @@
int ring, u64 sts_data0, u64 sts_data1)
{
struct net_device *netdev = adapter->netdev;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
struct qlcnic_rx_buffer *buffer;
struct sk_buff *skb;
struct qlcnic_host_rds_ring *rds_ring;
@@ -1552,10 +1563,9 @@
length = skb->len;
- if ((vid != 0xffff) && adapter->vlgrp)
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp, vid);
- else
- netif_receive_skb(skb);
+ if (vid != 0xffff)
+ __vlan_hwaccel_put_tag(skb, vid);
+ netif_receive_skb(skb);
adapter->stats.lro_pkts++;
adapter->stats.lrobytes += length;
@@ -1625,7 +1635,7 @@
for (ring = 0; ring < adapter->max_rds_rings; ring++) {
struct qlcnic_host_rds_ring *rds_ring =
- &adapter->recv_ctx.rds_rings[ring];
+ &adapter->recv_ctx->rds_rings[ring];
if (!list_empty(&sds_ring->free_list[ring])) {
list_for_each(cur, &sds_ring->free_list[ring]) {
@@ -1651,12 +1661,13 @@
}
void
-qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter,
struct qlcnic_host_rds_ring *rds_ring)
{
struct rcv_desc *pdesc;
struct qlcnic_rx_buffer *buffer;
- int producer, count = 0;
+ int count = 0;
+ u32 producer;
struct list_head *head;
producer = rds_ring->producer;
@@ -1696,7 +1707,8 @@
{
struct rcv_desc *pdesc;
struct qlcnic_rx_buffer *buffer;
- int producer, count = 0;
+ int count = 0;
+ uint32_t producer;
struct list_head *head;
if (!spin_trylock(&rds_ring->lock))
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cb1a1ef..3ab7d2c 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -13,12 +13,12 @@
#include <linux/swab.h>
#include <linux/dma-mapping.h>
-#include <linux/if_vlan.h>
#include <net/ip.h>
#include <linux/ipv6.h>
#include <linux/inetdevice.h>
#include <linux/sysfs.h>
#include <linux/aer.h>
+#include <linux/log2.h>
MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
MODULE_LICENSE("GPL");
@@ -98,6 +98,9 @@
static int qlcnicvf_start_firmware(struct qlcnic_adapter *);
static void qlcnic_set_netdev_features(struct qlcnic_adapter *,
struct qlcnic_esw_func_cfg *);
+static void qlcnic_vlan_rx_add(struct net_device *, u16);
+static void qlcnic_vlan_rx_del(struct net_device *, u16);
+
/* PCI Device ID Table */
#define ENTRY(device) \
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \
@@ -113,7 +116,7 @@
MODULE_DEVICE_TABLE(pci, qlcnic_pci_tbl);
-void
+inline void
qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
struct qlcnic_host_tx_ring *tx_ring)
{
@@ -169,7 +172,7 @@
{
int ring;
struct qlcnic_host_sds_ring *sds_ring;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
if (qlcnic_alloc_sds_rings(recv_ctx, adapter->max_sds_rings))
return -ENOMEM;
@@ -193,14 +196,14 @@
{
int ring;
struct qlcnic_host_sds_ring *sds_ring;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &recv_ctx->sds_rings[ring];
netif_napi_del(&sds_ring->napi);
}
- qlcnic_free_sds_rings(&adapter->recv_ctx);
+ qlcnic_free_sds_rings(adapter->recv_ctx);
}
static void
@@ -208,7 +211,7 @@
{
int ring;
struct qlcnic_host_sds_ring *sds_ring;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
return;
@@ -225,7 +228,7 @@
{
int ring;
struct qlcnic_host_sds_ring *sds_ring;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
return;
@@ -317,13 +320,6 @@
return 0;
}
-static void qlcnic_vlan_rx_register(struct net_device *netdev,
- struct vlan_group *grp)
-{
- struct qlcnic_adapter *adapter = netdev_priv(netdev);
- adapter->vlgrp = grp;
-}
-
static const struct net_device_ops qlcnic_netdev_ops = {
.ndo_open = qlcnic_open,
.ndo_stop = qlcnic_close,
@@ -333,8 +329,11 @@
.ndo_set_multicast_list = qlcnic_set_multi,
.ndo_set_mac_address = qlcnic_set_mac,
.ndo_change_mtu = qlcnic_change_mtu,
+ .ndo_fix_features = qlcnic_fix_features,
+ .ndo_set_features = qlcnic_set_features,
.ndo_tx_timeout = qlcnic_tx_timeout,
- .ndo_vlan_rx_register = qlcnic_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = qlcnic_vlan_rx_add,
+ .ndo_vlan_rx_kill_vid = qlcnic_vlan_rx_del,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = qlcnic_poll_controller,
#endif
@@ -352,24 +351,53 @@
.start_firmware = qlcnicvf_start_firmware
};
-static void
-qlcnic_setup_intr(struct qlcnic_adapter *adapter)
+static int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int err = -1;
+
+ adapter->max_sds_rings = 1;
+ adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);
+ qlcnic_set_msix_bit(pdev, 0);
+
+ if (adapter->msix_supported) {
+ enable_msix:
+ qlcnic_init_msix_entries(adapter, num_msix);
+ err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
+ if (err == 0) {
+ adapter->flags |= QLCNIC_MSIX_ENABLED;
+ qlcnic_set_msix_bit(pdev, 1);
+
+ adapter->max_sds_rings = num_msix;
+
+ dev_info(&pdev->dev, "using msi-x interrupts\n");
+ return err;
+ }
+ if (err > 0) {
+ num_msix = rounddown_pow_of_two(err);
+ if (num_msix)
+ goto enable_msix;
+ }
+ }
+ return err;
+}
+
+
+static void qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter)
{
const struct qlcnic_legacy_intr_set *legacy_intrp;
struct pci_dev *pdev = adapter->pdev;
- int err, num_msix;
- if (adapter->rss_supported) {
- num_msix = (num_online_cpus() >= MSIX_ENTRIES_PER_ADAPTER) ?
- MSIX_ENTRIES_PER_ADAPTER : 2;
- } else
- num_msix = 1;
+ if (use_msi && !pci_enable_msi(pdev)) {
+ adapter->flags |= QLCNIC_MSI_ENABLED;
+ adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
+ msi_tgt_status[adapter->ahw->pci_func]);
+ dev_info(&pdev->dev, "using msi interrupts\n");
+ adapter->msix_entries[0].vector = pdev->irq;
+ return;
+ }
- adapter->max_sds_rings = 1;
-
- adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);
-
- legacy_intrp = &legacy_intr[adapter->ahw.pci_func];
+ legacy_intrp = &legacy_intr[adapter->ahw->pci_func];
adapter->int_vec_bit = legacy_intrp->int_vec_bit;
adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
@@ -380,44 +408,30 @@
adapter->crb_int_state_reg = qlcnic_get_ioaddr(adapter,
ISR_INT_STATE_REG);
-
- qlcnic_set_msix_bit(pdev, 0);
-
- if (adapter->msix_supported) {
-
- qlcnic_init_msix_entries(adapter, num_msix);
- err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
- if (err == 0) {
- adapter->flags |= QLCNIC_MSIX_ENABLED;
- qlcnic_set_msix_bit(pdev, 1);
-
- if (adapter->rss_supported)
- adapter->max_sds_rings = num_msix;
-
- dev_info(&pdev->dev, "using msi-x interrupts\n");
- return;
- }
-
- if (err > 0)
- pci_disable_msix(pdev);
-
- /* fall through for msi */
- }
-
- if (use_msi && !pci_enable_msi(pdev)) {
- adapter->flags |= QLCNIC_MSI_ENABLED;
- adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
- msi_tgt_status[adapter->ahw.pci_func]);
- dev_info(&pdev->dev, "using msi interrupts\n");
- adapter->msix_entries[0].vector = pdev->irq;
- return;
- }
-
dev_info(&pdev->dev, "using legacy interrupts\n");
adapter->msix_entries[0].vector = pdev->irq;
}
static void
+qlcnic_setup_intr(struct qlcnic_adapter *adapter)
+{
+ int num_msix;
+
+ if (adapter->msix_supported) {
+ num_msix = (num_online_cpus() >=
+ QLCNIC_DEF_NUM_STS_DESC_RINGS) ?
+ QLCNIC_DEF_NUM_STS_DESC_RINGS :
+ QLCNIC_MIN_NUM_RSS_RINGS;
+ } else
+ num_msix = 1;
+
+ if (!qlcnic_enable_msix(adapter, num_msix))
+ return;
+
+ qlcnic_enable_msi_legacy(adapter);
+}
+
+static void
qlcnic_teardown_intr(struct qlcnic_adapter *adapter)
{
if (adapter->flags & QLCNIC_MSIX_ENABLED)
@@ -429,8 +443,8 @@
static void
qlcnic_cleanup_pci_map(struct qlcnic_adapter *adapter)
{
- if (adapter->ahw.pci_base0 != NULL)
- iounmap(adapter->ahw.pci_base0);
+ if (adapter->ahw->pci_base0 != NULL)
+ iounmap(adapter->ahw->pci_base0);
}
static int
@@ -464,8 +478,10 @@
for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
pfn = pci_info[i].id;
- if (pfn > QLCNIC_MAX_PCI_FUNC)
- return QL_STATUS_INVALID_PARAM;
+ if (pfn > QLCNIC_MAX_PCI_FUNC) {
+ ret = QL_STATUS_INVALID_PARAM;
+ goto err_eswitch;
+ }
adapter->npars[pfn].active = (u8)pci_info[i].active;
adapter->npars[pfn].type = (u8)pci_info[i].type;
adapter->npars[pfn].phy_port = (u8)pci_info[i].default_port;
@@ -498,7 +514,7 @@
u32 ref_count;
int i, ret = 1;
u32 data = QLCNIC_MGMT_FUNC;
- void __iomem *priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+ void __iomem *priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
/* If other drivers are not in use set their privilege level */
ref_count = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
@@ -510,16 +526,16 @@
for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
id = i;
if (adapter->npars[i].type != QLCNIC_TYPE_NIC ||
- id == adapter->ahw.pci_func)
+ id == adapter->ahw->pci_func)
continue;
data |= (qlcnic_config_npars &
QLC_DEV_SET_DRV(0xf, id));
}
} else {
data = readl(priv_op);
- data = (data & ~QLC_DEV_SET_DRV(0xf, adapter->ahw.pci_func)) |
+ data = (data & ~QLC_DEV_SET_DRV(0xf, adapter->ahw->pci_func)) |
(QLC_DEV_SET_DRV(QLCNIC_MGMT_FUNC,
- adapter->ahw.pci_func));
+ adapter->ahw->pci_func));
}
writel(data, priv_op);
qlcnic_api_unlock(adapter);
@@ -537,22 +553,23 @@
u32 op_mode, priv_level;
/* Determine FW API version */
- adapter->fw_hal_version = readl(adapter->ahw.pci_base0 + QLCNIC_FW_API);
+ adapter->fw_hal_version = readl(adapter->ahw->pci_base0 +
+ QLCNIC_FW_API);
/* Find PCI function number */
pci_read_config_dword(adapter->pdev, QLCNIC_MSIX_TABLE_OFFSET, &func);
- msix_base_addr = adapter->ahw.pci_base0 + QLCNIC_MSIX_BASE;
+ msix_base_addr = adapter->ahw->pci_base0 + QLCNIC_MSIX_BASE;
msix_base = readl(msix_base_addr);
func = (func - msix_base)/QLCNIC_MSIX_TBL_PGSIZE;
- adapter->ahw.pci_func = func;
+ adapter->ahw->pci_func = func;
/* Determine function privilege level */
- priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+ priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
op_mode = readl(priv_op);
if (op_mode == QLC_DEV_DRV_DEFAULT)
priv_level = QLCNIC_MGMT_FUNC;
else
- priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+ priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func);
if (priv_level == QLCNIC_NON_PRIV_FUNC) {
adapter->op_mode = QLCNIC_NON_PRIV_FUNC;
@@ -591,13 +608,14 @@
dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
- adapter->ahw.pci_base0 = mem_ptr0;
- adapter->ahw.pci_len0 = pci_len0;
+ adapter->ahw->pci_base0 = mem_ptr0;
+ adapter->ahw->pci_len0 = pci_len0;
qlcnic_check_vf(adapter);
- adapter->ahw.ocm_win_crb = qlcnic_get_ioaddr(adapter,
- QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(adapter->ahw.pci_func)));
+ adapter->ahw->ocm_win_crb = qlcnic_get_ioaddr(adapter,
+ QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(
+ adapter->ahw->pci_func)));
return 0;
}
@@ -639,7 +657,7 @@
dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
fw_major, fw_minor, fw_build);
- if (adapter->ahw.port_type == QLCNIC_XGBE) {
+ if (adapter->ahw->port_type == QLCNIC_XGBE) {
if (adapter->flags & QLCNIC_ESWITCH_ENABLED) {
adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_VF;
adapter->max_rxd = MAX_RCV_DESCRIPTORS_VF;
@@ -651,7 +669,7 @@
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
- } else if (adapter->ahw.port_type == QLCNIC_GBE) {
+ } else if (adapter->ahw->port_type == QLCNIC_GBE) {
adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
@@ -659,7 +677,6 @@
}
adapter->msix_supported = !!use_msi_x;
- adapter->rss_supported = !!use_msi_x;
adapter->num_txd = MAX_CMD_DESCRIPTORS;
@@ -672,7 +689,7 @@
int err;
struct qlcnic_info nic_info;
- err = qlcnic_get_nic_info(adapter, &nic_info, adapter->ahw.pci_func);
+ err = qlcnic_get_nic_info(adapter, &nic_info, adapter->ahw->pci_func);
if (err)
return err;
@@ -708,6 +725,22 @@
}
static void
+qlcnic_vlan_rx_add(struct net_device *netdev, u16 vid)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ set_bit(vid, adapter->vlans);
+}
+
+static void
+qlcnic_vlan_rx_del(struct net_device *netdev, u16 vid)
+{
+ struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+ qlcnic_restore_indev_addr(netdev, NETDEV_DOWN);
+ clear_bit(vid, adapter->vlans);
+}
+
+static void
qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter,
struct qlcnic_esw_func_cfg *esw_cfg)
{
@@ -734,7 +767,7 @@
if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
return 0;
- esw_cfg.pci_func = adapter->ahw.pci_func;
+ esw_cfg.pci_func = adapter->ahw->pci_func;
if (qlcnic_get_eswitch_port_config(adapter, &esw_cfg))
return -EIO;
qlcnic_set_vlan_config(adapter, &esw_cfg);
@@ -750,28 +783,27 @@
struct net_device *netdev = adapter->netdev;
unsigned long features, vlan_features;
- features = (NETIF_F_SG | NETIF_F_IP_CSUM |
+ features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
NETIF_F_IPV6_CSUM | NETIF_F_GRO);
vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM);
+ NETIF_F_IPV6_CSUM | NETIF_F_HW_VLAN_FILTER);
if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO) {
features |= (NETIF_F_TSO | NETIF_F_TSO6);
vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
}
- if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
+
+ if (netdev->features & NETIF_F_LRO)
features |= NETIF_F_LRO;
if (esw_cfg->offload_flags & BIT_0) {
netdev->features |= features;
- adapter->rx_csum = 1;
if (!(esw_cfg->offload_flags & BIT_1))
netdev->features &= ~NETIF_F_TSO;
if (!(esw_cfg->offload_flags & BIT_2))
netdev->features &= ~NETIF_F_TSO6;
} else {
netdev->features &= ~features;
- adapter->rx_csum = 0;
}
netdev->vlan_features = (features & vlan_features);
@@ -791,14 +823,14 @@
if (adapter->flags & QLCNIC_ADAPTER_INITIALIZED)
return 0;
- priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+ priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
op_mode = readl(priv_op);
- priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+ priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func);
if (op_mode == QLC_DEV_DRV_DEFAULT)
priv_level = QLCNIC_MGMT_FUNC;
else
- priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+ priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func);
if (adapter->flags & QLCNIC_ESWITCH_ENABLED) {
if (priv_level == QLCNIC_MGMT_FUNC) {
@@ -1038,7 +1070,7 @@
unsigned long flags = 0;
struct net_device *netdev = adapter->netdev;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
handler = qlcnic_tmp_intr;
@@ -1075,7 +1107,7 @@
int ring;
struct qlcnic_host_sds_ring *sds_ring;
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &recv_ctx->sds_rings[ring];
@@ -1083,20 +1115,6 @@
}
}
-static void
-qlcnic_init_coalesce_defaults(struct qlcnic_adapter *adapter)
-{
- adapter->coal.flags = QLCNIC_INTR_DEFAULT;
- adapter->coal.normal.data.rx_time_us =
- QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
- adapter->coal.normal.data.rx_packets =
- QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
- adapter->coal.normal.data.tx_time_us =
- QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US;
- adapter->coal.normal.data.tx_packets =
- QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS;
-}
-
static int
__qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
{
@@ -1115,14 +1133,14 @@
return -EIO;
for (ring = 0; ring < adapter->max_rds_rings; ring++) {
- rds_ring = &adapter->recv_ctx.rds_rings[ring];
- qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+ rds_ring = &adapter->recv_ctx->rds_rings[ring];
+ qlcnic_post_rx_buffers(adapter, rds_ring);
}
qlcnic_set_multi(netdev);
qlcnic_fw_cmd_set_mtu(adapter, netdev->mtu);
- adapter->ahw.linkup = 0;
+ adapter->ahw->linkup = 0;
if (adapter->max_sds_rings > 1)
qlcnic_config_rss(adapter, 1);
@@ -1230,8 +1248,6 @@
goto err_out_free_hw;
}
- qlcnic_init_coalesce_defaults(adapter);
-
qlcnic_create_sysfs_entries(adapter);
adapter->is_up = QLCNIC_ADAPTER_UP_MAGIC;
@@ -1272,7 +1288,7 @@
clear_bit(__QLCNIC_DEV_UP, &adapter->state);
if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
- sds_ring = &adapter->recv_ctx.sds_rings[ring];
+ sds_ring = &adapter->recv_ctx->sds_rings[ring];
qlcnic_disable_int(sds_ring);
}
}
@@ -1293,6 +1309,48 @@
netif_device_attach(netdev);
}
+static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter)
+{
+ int err = 0;
+ adapter->ahw = kzalloc(sizeof(struct qlcnic_hardware_context),
+ GFP_KERNEL);
+ if (!adapter->ahw) {
+ dev_err(&adapter->pdev->dev,
+ "Failed to allocate recv ctx resources for adapter\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+ adapter->recv_ctx = kzalloc(sizeof(struct qlcnic_recv_context),
+ GFP_KERNEL);
+ if (!adapter->recv_ctx) {
+ dev_err(&adapter->pdev->dev,
+ "Failed to allocate recv ctx resources for adapter\n");
+ kfree(adapter->ahw);
+ adapter->ahw = NULL;
+ err = -ENOMEM;
+ goto err_out;
+ }
+ /* Initialize interrupt coalesce parameters */
+ adapter->ahw->coal.flag = QLCNIC_INTR_DEFAULT;
+ adapter->ahw->coal.rx_time_us = QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
+ adapter->ahw->coal.rx_packets = QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
+err_out:
+ return err;
+}
+
+static void qlcnic_free_adapter_resources(struct qlcnic_adapter *adapter)
+{
+ kfree(adapter->recv_ctx);
+ adapter->recv_ctx = NULL;
+
+ if (adapter->ahw->fw_dump.tmpl_hdr) {
+ vfree(adapter->ahw->fw_dump.tmpl_hdr);
+ adapter->ahw->fw_dump.tmpl_hdr = NULL;
+ }
+ kfree(adapter->ahw);
+ adapter->ahw = NULL;
+}
+
int qlcnic_diag_alloc_res(struct net_device *netdev, int test)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
@@ -1325,13 +1383,13 @@
}
for (ring = 0; ring < adapter->max_rds_rings; ring++) {
- rds_ring = &adapter->recv_ctx.rds_rings[ring];
- qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+ rds_ring = &adapter->recv_ctx->rds_rings[ring];
+ qlcnic_post_rx_buffers(adapter, rds_ring);
}
if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
- sds_ring = &adapter->recv_ctx.sds_rings[ring];
+ sds_ring = &adapter->recv_ctx->sds_rings[ring];
qlcnic_enable_int(sds_ring);
}
}
@@ -1399,7 +1457,6 @@
int err;
struct pci_dev *pdev = adapter->pdev;
- adapter->rx_csum = 1;
adapter->mc_enabled = 0;
adapter->max_mc_count = 38;
@@ -1410,26 +1467,24 @@
SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops);
- netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM | NETIF_F_GRO | NETIF_F_HW_VLAN_RX);
- netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM);
+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM;
- if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO) {
- netdev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
- netdev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
- }
+ if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO)
+ netdev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
+ if (pci_using_dac)
+ netdev->hw_features |= NETIF_F_HIGHDMA;
- if (pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
+ netdev->vlan_features = netdev->hw_features;
if (adapter->capabilities & QLCNIC_FW_CAPABILITY_FVLANTX)
- netdev->features |= (NETIF_F_HW_VLAN_TX);
-
+ netdev->hw_features |= NETIF_F_HW_VLAN_TX;
if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
- netdev->features |= NETIF_F_LRO;
+ netdev->hw_features |= NETIF_F_LRO;
+
+ netdev->features |= netdev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
+
netdev->irq = adapter->msix_entries[0].vector;
netif_carrier_off(netdev);
@@ -1459,6 +1514,19 @@
return 0;
}
+static int
+qlcnic_alloc_msix_entries(struct qlcnic_adapter *adapter, u16 count)
+{
+ adapter->msix_entries = kcalloc(count, sizeof(struct msix_entry),
+ GFP_KERNEL);
+
+ if (adapter->msix_entries)
+ return 0;
+
+ dev_err(&adapter->pdev->dev, "failed allocating msix_entries\n");
+ return -ENOMEM;
+}
+
static int __devinit
qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -1501,23 +1569,30 @@
adapter = netdev_priv(netdev);
adapter->netdev = netdev;
adapter->pdev = pdev;
+
+ if (qlcnic_alloc_adapter_resources(adapter))
+ goto err_out_free_netdev;
+
adapter->dev_rst_time = jiffies;
-
revision_id = pdev->revision;
- adapter->ahw.revision_id = revision_id;
+ adapter->ahw->revision_id = revision_id;
- rwlock_init(&adapter->ahw.crb_lock);
- mutex_init(&adapter->ahw.mem_lock);
+ rwlock_init(&adapter->ahw->crb_lock);
+ mutex_init(&adapter->ahw->mem_lock);
spin_lock_init(&adapter->tx_clean_lock);
INIT_LIST_HEAD(&adapter->mac_list);
err = qlcnic_setup_pci_map(adapter);
if (err)
- goto err_out_free_netdev;
+ goto err_out_free_hw;
/* This will be reset for mezz cards */
- adapter->portnum = adapter->ahw.pci_func;
+ adapter->portnum = adapter->ahw->pci_func;
+
+ /* Get FW dump template and store it */
+ if (adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
+ qlcnic_fw_cmd_get_minidump_temp(adapter);
err = qlcnic_get_board_info(adapter);
if (err) {
@@ -1545,11 +1620,15 @@
pr_info("%s: %s Board Chip rev 0x%x\n",
module_name(THIS_MODULE),
- brd_name, adapter->ahw.revision_id);
+ brd_name, adapter->ahw->revision_id);
}
qlcnic_clear_stats(adapter);
+ err = qlcnic_alloc_msix_entries(adapter, adapter->max_rx_ques);
+ if (err)
+ goto err_out_decr_ref;
+
qlcnic_setup_intr(adapter);
err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac);
@@ -1560,7 +1639,7 @@
qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
- switch (adapter->ahw.port_type) {
+ switch (adapter->ahw->port_type) {
case QLCNIC_GBE:
dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
adapter->netdev->name);
@@ -1578,6 +1657,7 @@
err_out_disable_msi:
qlcnic_teardown_intr(adapter);
+ kfree(adapter->msix_entries);
err_out_decr_ref:
qlcnic_clr_all_drv_state(adapter, 0);
@@ -1585,6 +1665,9 @@
err_out_iounmap:
qlcnic_cleanup_pci_map(adapter);
+err_out_free_hw:
+ qlcnic_free_adapter_resources(adapter);
+
err_out_free_netdev:
free_netdev(netdev);
@@ -1626,6 +1709,7 @@
qlcnic_free_lb_filters_mem(adapter);
qlcnic_teardown_intr(adapter);
+ kfree(adapter->msix_entries);
qlcnic_remove_diag_entries(adapter);
@@ -1638,6 +1722,7 @@
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ qlcnic_free_adapter_resources(adapter);
free_netdev(netdev);
}
static int __qlcnic_shutdown(struct pci_dev *pdev)
@@ -1819,6 +1904,7 @@
vlan_req->vlan_id = vlan_id;
tx_ring->producer = get_next_index(producer, tx_ring->num_desc);
+ smp_mb();
}
#define QLCNIC_MAC_HASH(MAC)\
@@ -1879,58 +1965,122 @@
spin_unlock(&adapter->mac_learn_lock);
}
-static void
-qlcnic_tso_check(struct net_device *netdev,
- struct qlcnic_host_tx_ring *tx_ring,
+static int
+qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
struct cmd_desc_type0 *first_desc,
struct sk_buff *skb)
{
- u8 opcode = TX_ETHER_PKT;
- __be16 protocol = skb->protocol;
- u16 flags = 0;
- int copied, offset, copy_len, hdr_len = 0, tso = 0;
+ u8 opcode = 0, hdr_len = 0;
+ u16 flags = 0, vlan_tci = 0;
+ int copied, offset, copy_len;
struct cmd_desc_type0 *hwdesc;
struct vlan_ethhdr *vh;
- struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
+ u16 protocol = ntohs(skb->protocol);
u32 producer = tx_ring->producer;
- __le16 vlan_oob = first_desc->flags_opcode &
- cpu_to_le16(FLAGS_VLAN_OOB);
+
+ if (protocol == ETH_P_8021Q) {
+ vh = (struct vlan_ethhdr *)skb->data;
+ flags = FLAGS_VLAN_TAGGED;
+ vlan_tci = vh->h_vlan_TCI;
+ } else if (vlan_tx_tag_present(skb)) {
+ flags = FLAGS_VLAN_OOB;
+ vlan_tci = vlan_tx_tag_get(skb);
+ }
+ if (unlikely(adapter->pvid)) {
+ if (vlan_tci && !(adapter->flags & QLCNIC_TAGGING_ENABLED))
+ return -EIO;
+ if (vlan_tci && (adapter->flags & QLCNIC_TAGGING_ENABLED))
+ goto set_flags;
+
+ flags = FLAGS_VLAN_OOB;
+ vlan_tci = adapter->pvid;
+ }
+set_flags:
+ qlcnic_set_tx_vlan_tci(first_desc, vlan_tci);
+ qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
if (*(skb->data) & BIT_0) {
flags |= BIT_0;
memcpy(&first_desc->eth_addr, skb->data, ETH_ALEN);
}
-
- if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+ opcode = TX_ETHER_PKT;
+ if ((adapter->netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
skb_shinfo(skb)->gso_size > 0) {
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
first_desc->total_hdr_length = hdr_len;
- if (vlan_oob) {
+
+ opcode = (protocol == ETH_P_IPV6) ? TX_TCP_LSO6 : TX_TCP_LSO;
+
+ /* For LSO, we need to copy the MAC/IP/TCP headers into
+ * the descriptor ring */
+ copied = 0;
+ offset = 2;
+
+ if (flags & FLAGS_VLAN_OOB) {
first_desc->total_hdr_length += VLAN_HLEN;
first_desc->tcp_hdr_offset = VLAN_HLEN;
first_desc->ip_hdr_offset = VLAN_HLEN;
/* Only in case of TSO on vlan device */
flags |= FLAGS_VLAN_TAGGED;
+
+ /* Create a TSO vlan header template for firmware */
+
+ hwdesc = &tx_ring->desc_head[producer];
+ tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+ copy_len = min((int)sizeof(struct cmd_desc_type0) -
+ offset, hdr_len + VLAN_HLEN);
+
+ vh = (struct vlan_ethhdr *)((char *) hwdesc + 2);
+ skb_copy_from_linear_data(skb, vh, 12);
+ vh->h_vlan_proto = htons(ETH_P_8021Q);
+ vh->h_vlan_TCI = htons(vlan_tci);
+
+ skb_copy_from_linear_data_offset(skb, 12,
+ (char *)vh + 16, copy_len - 16);
+
+ copied = copy_len - VLAN_HLEN;
+ offset = 0;
+
+ producer = get_next_index(producer, tx_ring->num_desc);
}
- opcode = (protocol == cpu_to_be16(ETH_P_IPV6)) ?
- TX_TCP_LSO6 : TX_TCP_LSO;
- tso = 1;
+ while (copied < hdr_len) {
+
+ copy_len = min((int)sizeof(struct cmd_desc_type0) -
+ offset, (hdr_len - copied));
+
+ hwdesc = &tx_ring->desc_head[producer];
+ tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+ skb_copy_from_linear_data_offset(skb, copied,
+ (char *) hwdesc + offset, copy_len);
+
+ copied += copy_len;
+ offset = 0;
+
+ producer = get_next_index(producer, tx_ring->num_desc);
+ }
+
+ tx_ring->producer = producer;
+ smp_mb();
+ adapter->stats.lso_frames++;
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
u8 l4proto;
- if (protocol == cpu_to_be16(ETH_P_IP)) {
+ if (protocol == ETH_P_IP) {
l4proto = ip_hdr(skb)->protocol;
if (l4proto == IPPROTO_TCP)
opcode = TX_TCP_PKT;
else if (l4proto == IPPROTO_UDP)
opcode = TX_UDP_PKT;
- } else if (protocol == cpu_to_be16(ETH_P_IPV6)) {
+ } else if (protocol == ETH_P_IPV6) {
l4proto = ipv6_hdr(skb)->nexthdr;
if (l4proto == IPPROTO_TCP)
@@ -1939,63 +2089,11 @@
opcode = TX_UDPV6_PKT;
}
}
-
first_desc->tcp_hdr_offset += skb_transport_offset(skb);
first_desc->ip_hdr_offset += skb_network_offset(skb);
qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
- if (!tso)
- return;
-
- /* For LSO, we need to copy the MAC/IP/TCP headers into
- * the descriptor ring
- */
- copied = 0;
- offset = 2;
-
- if (vlan_oob) {
- /* Create a TSO vlan header template for firmware */
-
- hwdesc = &tx_ring->desc_head[producer];
- tx_ring->cmd_buf_arr[producer].skb = NULL;
-
- copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
- hdr_len + VLAN_HLEN);
-
- vh = (struct vlan_ethhdr *)((char *)hwdesc + 2);
- skb_copy_from_linear_data(skb, vh, 12);
- vh->h_vlan_proto = htons(ETH_P_8021Q);
- vh->h_vlan_TCI = (__be16)swab16((u16)first_desc->vlan_TCI);
-
- skb_copy_from_linear_data_offset(skb, 12,
- (char *)vh + 16, copy_len - 16);
-
- copied = copy_len - VLAN_HLEN;
- offset = 0;
-
- producer = get_next_index(producer, tx_ring->num_desc);
- }
-
- while (copied < hdr_len) {
-
- copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
- (hdr_len - copied));
-
- hwdesc = &tx_ring->desc_head[producer];
- tx_ring->cmd_buf_arr[producer].skb = NULL;
-
- skb_copy_from_linear_data_offset(skb, copied,
- (char *)hwdesc + offset, copy_len);
-
- copied += copy_len;
- offset = 0;
-
- producer = get_next_index(producer, tx_ring->num_desc);
- }
-
- tx_ring->producer = producer;
- barrier();
- adapter->stats.lso_frames++;
+ return 0;
}
static int
@@ -2046,39 +2144,21 @@
return -ENOMEM;
}
-static int
-qlcnic_check_tx_tagging(struct qlcnic_adapter *adapter,
- struct sk_buff *skb,
- struct cmd_desc_type0 *first_desc)
+static void
+qlcnic_unmap_buffers(struct pci_dev *pdev, struct sk_buff *skb,
+ struct qlcnic_cmd_buffer *pbuf)
{
- u8 opcode = 0;
- u16 flags = 0;
- __be16 protocol = skb->protocol;
- struct vlan_ethhdr *vh;
+ struct qlcnic_skb_frag *nf = &pbuf->frag_array[0];
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ int i;
- if (protocol == cpu_to_be16(ETH_P_8021Q)) {
- vh = (struct vlan_ethhdr *)skb->data;
- protocol = vh->h_vlan_encapsulated_proto;
- flags = FLAGS_VLAN_TAGGED;
- qlcnic_set_tx_vlan_tci(first_desc, ntohs(vh->h_vlan_TCI));
- } else if (vlan_tx_tag_present(skb)) {
- flags = FLAGS_VLAN_OOB;
- qlcnic_set_tx_vlan_tci(first_desc, vlan_tx_tag_get(skb));
+ for (i = 0; i < nr_frags; i++) {
+ nf = &pbuf->frag_array[i+1];
+ pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE);
}
- if (unlikely(adapter->pvid)) {
- if (first_desc->vlan_TCI &&
- !(adapter->flags & QLCNIC_TAGGING_ENABLED))
- return -EIO;
- if (first_desc->vlan_TCI &&
- (adapter->flags & QLCNIC_TAGGING_ENABLED))
- goto set_flags;
- flags = FLAGS_VLAN_OOB;
- qlcnic_set_tx_vlan_tci(first_desc, adapter->pvid);
- }
-set_flags:
- qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
- return 0;
+ nf = &pbuf->frag_array[0];
+ pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
}
static inline void
@@ -2103,7 +2183,7 @@
int i, k;
u32 producer;
- int frag_count, no_of_desc;
+ int frag_count;
u32 num_txd = tx_ring->num_desc;
if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
@@ -2133,12 +2213,8 @@
frag_count = 1 + skb_shinfo(skb)->nr_frags;
}
- /* 4 fragments per cmd des */
- no_of_desc = (frag_count + 3) >> 2;
-
if (unlikely(qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH)) {
netif_stop_queue(netdev);
- smp_mb();
if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH)
netif_start_queue(netdev);
else {
@@ -2155,9 +2231,6 @@
first_desc = hwdesc = &tx_ring->desc_head[producer];
qlcnic_clear_cmddesc((u64 *)hwdesc);
- if (qlcnic_check_tx_tagging(adapter, skb, first_desc))
- goto drop_packet;
-
if (qlcnic_map_tx_skb(pdev, skb, pbuf)) {
adapter->stats.tx_dma_map_error++;
goto drop_packet;
@@ -2201,8 +2274,10 @@
}
tx_ring->producer = get_next_index(producer, num_txd);
+ smp_mb();
- qlcnic_tso_check(netdev, tx_ring, first_desc, skb);
+ if (unlikely(qlcnic_tx_pkt(adapter, first_desc, skb)))
+ goto unwind_buff;
if (qlcnic_mac_learn)
qlcnic_send_filter(adapter, tx_ring, first_desc, skb);
@@ -2214,6 +2289,8 @@
return NETDEV_TX_OK;
+unwind_buff:
+ qlcnic_unmap_buffers(pdev, skb, pbuf);
drop_packet:
adapter->stats.txdropped++;
dev_kfree_skb_any(skb);
@@ -2260,16 +2337,16 @@
{
struct net_device *netdev = adapter->netdev;
- if (adapter->ahw.linkup && !linkup) {
+ if (adapter->ahw->linkup && !linkup) {
netdev_info(netdev, "NIC Link is down\n");
- adapter->ahw.linkup = 0;
+ adapter->ahw->linkup = 0;
if (netif_running(netdev)) {
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
- } else if (!adapter->ahw.linkup && linkup) {
+ } else if (!adapter->ahw->linkup && linkup) {
netdev_info(netdev, "NIC Link is up\n");
- adapter->ahw.linkup = 1;
+ adapter->ahw->linkup = 1;
if (netif_running(netdev)) {
netif_carrier_on(netdev);
netif_wake_queue(netdev);
@@ -2505,7 +2582,7 @@
int ring;
struct qlcnic_host_sds_ring *sds_ring;
struct qlcnic_adapter *adapter = netdev_priv(netdev);
- struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
disable_irq(adapter->irq);
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
@@ -2756,6 +2833,8 @@
set_bit(__QLCNIC_START_FW, &adapter->state);
QLCDB(adapter, DRV, "Restarting fw\n");
qlcnic_idc_debug_info(adapter, 0);
+ QLCDB(adapter, DRV, "Take FW dump\n");
+ qlcnic_dump_fw(adapter);
}
qlcnic_api_unlock(adapter);
@@ -2854,7 +2933,7 @@
}
/*Transit to RESET state from READY state only */
-static void
+void
qlcnic_dev_request_reset(struct qlcnic_adapter *adapter)
{
u32 state;
@@ -3266,6 +3345,56 @@
.store = qlcnic_store_diag_mode,
};
+int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val)
+{
+ if (!use_msi_x && !use_msi) {
+ netdev_info(netdev, "no msix or msi support, hence no rss\n");
+ return -EINVAL;
+ }
+
+ if ((val > max_hw) || (val < 2) || !is_power_of_2(val)) {
+ netdev_info(netdev, "rss_ring valid range [2 - %x] in "
+ " powers of 2\n", max_hw);
+ return -EINVAL;
+ }
+ return 0;
+
+}
+
+int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err = 0;
+
+ if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+ return -EBUSY;
+
+ netif_device_detach(netdev);
+ if (netif_running(netdev))
+ __qlcnic_down(adapter, netdev);
+ qlcnic_detach(adapter);
+ qlcnic_teardown_intr(adapter);
+
+ if (qlcnic_enable_msix(adapter, data)) {
+ netdev_info(netdev, "failed setting max_rss; rss disabled\n");
+ qlcnic_enable_msi_legacy(adapter);
+ }
+
+ if (netif_running(netdev)) {
+ err = qlcnic_attach(adapter);
+ if (err)
+ goto done;
+ err = __qlcnic_up(adapter, netdev);
+ if (err)
+ goto done;
+ qlcnic_restore_indev_addr(netdev, NETDEV_UP);
+ }
+ done:
+ netif_device_attach(netdev);
+ clear_bit(__QLCNIC_RESETTING, &adapter->state);
+ return err;
+}
+
static int
qlcnic_sysfs_validate_crb(struct qlcnic_adapter *adapter,
loff_t offset, size_t size)
@@ -3396,7 +3525,6 @@
return size;
}
-
static struct bin_attribute bin_attr_crb = {
.attr = {.name = "crb", .mode = (S_IRUGO | S_IWUSR)},
.size = 0,
@@ -3515,7 +3643,7 @@
u8 pci_func;
int i;
- op_mode = readl(adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE);
+ op_mode = readl(adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE);
for (i = 0; i < count; i++) {
pci_func = esw_cfg[i].pci_func;
@@ -3581,13 +3709,13 @@
if (qlcnic_config_switch_port(adapter, &esw_cfg[i]))
return QL_STATUS_INVALID_PARAM;
- if (adapter->ahw.pci_func != esw_cfg[i].pci_func)
+ if (adapter->ahw->pci_func != esw_cfg[i].pci_func)
continue;
op_mode = esw_cfg[i].op_mode;
qlcnic_get_eswitch_port_config(adapter, &esw_cfg[i]);
esw_cfg[i].op_mode = op_mode;
- esw_cfg[i].pci_func = adapter->ahw.pci_func;
+ esw_cfg[i].pci_func = adapter->ahw->pci_func;
switch (esw_cfg[i].op_mode) {
case QLCNIC_PORT_DEFAULTS:
@@ -3968,14 +4096,14 @@
dev_info(dev, "failed to create crb sysfs entry\n");
if (device_create_bin_file(dev, &bin_attr_mem))
dev_info(dev, "failed to create mem sysfs entry\n");
+ if (device_create_bin_file(dev, &bin_attr_pci_config))
+ dev_info(dev, "failed to create pci config sysfs entry");
if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
return;
if (device_create_bin_file(dev, &bin_attr_esw_config))
dev_info(dev, "failed to create esw config sysfs entry");
if (adapter->op_mode != QLCNIC_MGMT_FUNC)
return;
- if (device_create_bin_file(dev, &bin_attr_pci_config))
- dev_info(dev, "failed to create pci config sysfs entry");
if (device_create_bin_file(dev, &bin_attr_npar_config))
dev_info(dev, "failed to create npar config sysfs entry");
if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3996,12 +4124,12 @@
device_remove_file(dev, &dev_attr_diag_mode);
device_remove_bin_file(dev, &bin_attr_crb);
device_remove_bin_file(dev, &bin_attr_mem);
+ device_remove_bin_file(dev, &bin_attr_pci_config);
if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
return;
device_remove_bin_file(dev, &bin_attr_esw_config);
if (adapter->op_mode != QLCNIC_MGMT_FUNC)
return;
- device_remove_bin_file(dev, &bin_attr_pci_config);
device_remove_bin_file(dev, &bin_attr_npar_config);
device_remove_bin_file(dev, &bin_attr_pm_config);
device_remove_bin_file(dev, &bin_attr_esw_stats);
@@ -4048,14 +4176,10 @@
qlcnic_config_indev_addr(adapter, netdev, event);
- if (!adapter->vlgrp)
- return;
-
- for (vid = 0; vid < VLAN_N_VID; vid++) {
- dev = vlan_group_get_device(adapter->vlgrp, vid);
+ for_each_set_bit(vid, adapter->vlans, VLAN_N_VID) {
+ dev = vlan_find_dev(netdev, vid);
if (!dev)
continue;
-
qlcnic_config_indev_addr(adapter, dev, event);
}
}
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 4757c59..d328507 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2134,7 +2134,7 @@
struct delayed_work mpi_idc_work;
struct delayed_work mpi_core_to_log;
struct completion ide_completion;
- struct nic_operations *nic_ops;
+ const struct nic_operations *nic_ops;
u16 device_id;
struct timer_list timer;
atomic_t lb_count;
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 8149cc9..19b00fa 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -356,7 +356,7 @@
ecmd->port = PORT_FIBRE;
}
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
ecmd->duplex = DUPLEX_FULL;
return 0;
@@ -412,31 +412,31 @@
return 0;
}
-static int ql_phys_id(struct net_device *ndev, u32 data)
+static int ql_set_phys_id(struct net_device *ndev,
+ enum ethtool_phys_id_state state)
+
{
struct ql_adapter *qdev = netdev_priv(ndev);
- u32 led_reg, i;
- int status;
- /* Save the current LED settings */
- status = ql_mb_get_led_cfg(qdev);
- if (status)
- return status;
- led_reg = qdev->led_config;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ /* Save the current LED settings */
+ if (ql_mb_get_led_cfg(qdev))
+ return -EIO;
- /* Start blinking the led */
- if (!data || data > 300)
- data = 300;
-
- for (i = 0; i < (data * 10); i++)
+ /* Start blinking */
ql_mb_set_led_cfg(qdev, QL_LED_BLINK);
+ return 0;
- /* Restore LED settings */
- status = ql_mb_set_led_cfg(qdev, led_reg);
- if (status)
- return status;
+ case ETHTOOL_ID_INACTIVE:
+ /* Restore LED settings */
+ if (ql_mb_set_led_cfg(qdev, qdev->led_config))
+ return -EIO;
+ return 0;
- return 0;
+ default:
+ return -EINVAL;
+ }
}
static int ql_start_loopback(struct ql_adapter *qdev)
@@ -655,32 +655,6 @@
return status;
}
-static u32 ql_get_rx_csum(struct net_device *netdev)
-{
- struct ql_adapter *qdev = netdev_priv(netdev);
- return qdev->rx_csum;
-}
-
-static int ql_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
- struct ql_adapter *qdev = netdev_priv(netdev);
- qdev->rx_csum = data;
- return 0;
-}
-
-static int ql_set_tso(struct net_device *ndev, uint32_t data)
-{
-
- if (data) {
- ndev->features |= NETIF_F_TSO;
- ndev->features |= NETIF_F_TSO6;
- } else {
- ndev->features &= ~NETIF_F_TSO;
- ndev->features &= ~NETIF_F_TSO6;
- }
- return 0;
-}
-
static u32 ql_get_msglevel(struct net_device *ndev)
{
struct ql_adapter *qdev = netdev_priv(ndev);
@@ -703,18 +677,10 @@
.get_msglevel = ql_get_msglevel,
.set_msglevel = ql_set_msglevel,
.get_link = ethtool_op_get_link,
- .phys_id = ql_phys_id,
+ .set_phys_id = ql_set_phys_id,
.self_test = ql_self_test,
.get_pauseparam = ql_get_pauseparam,
.set_pauseparam = ql_set_pauseparam,
- .get_rx_csum = ql_get_rx_csum,
- .set_rx_csum = ql_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ql_set_tso,
.get_coalesce = ql_get_coalesce,
.set_coalesce = ql_set_coalesce,
.get_sset_count = ql_get_sset_count,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 5bb3119..6c9d124 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1571,7 +1571,7 @@
skb->protocol = eth_type_trans(skb, ndev);
skb_checksum_none_assert(skb);
- if (qdev->rx_csum &&
+ if ((ndev->features & NETIF_F_RXCSUM) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -1684,7 +1684,7 @@
/* If rx checksum is on, and there are no
* csum or frame errors.
*/
- if (qdev->rx_csum &&
+ if ((ndev->features & NETIF_F_RXCSUM) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -2004,7 +2004,7 @@
/* If rx checksum is on, and there are no
* csum or frame errors.
*/
- if (qdev->rx_csum &&
+ if ((ndev->features & NETIF_F_RXCSUM) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -4412,12 +4412,12 @@
rtnl_unlock();
}
-static struct nic_operations qla8012_nic_ops = {
+static const struct nic_operations qla8012_nic_ops = {
.get_flash = ql_get_8012_flash_params,
.port_initialize = ql_8012_port_initialize,
};
-static struct nic_operations qla8000_nic_ops = {
+static const struct nic_operations qla8000_nic_ops = {
.get_flash = ql_get_8000_flash_params,
.port_initialize = ql_8000_port_initialize,
};
@@ -4621,7 +4621,6 @@
/*
* Set up the operating parameters.
*/
- qdev->rx_csum = 1;
qdev->workqueue = create_singlethread_workqueue(ndev->name);
INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
@@ -4695,15 +4694,11 @@
qdev = netdev_priv(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
- ndev->features = (0
- | NETIF_F_IP_CSUM
- | NETIF_F_SG
- | NETIF_F_TSO
- | NETIF_F_TSO6
- | NETIF_F_TSO_ECN
- | NETIF_F_HW_VLAN_TX
- | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER);
- ndev->features |= NETIF_F_GRO;
+ ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN |
+ NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+ ndev->features = ndev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
if (test_bit(QL_DMA64, &qdev->flags))
ndev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 493b0de..04f4e60 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -37,6 +37,8 @@
#define FIRMWARE_8168D_1 "rtl_nic/rtl8168d-1.fw"
#define FIRMWARE_8168D_2 "rtl_nic/rtl8168d-2.fw"
+#define FIRMWARE_8168E_1 "rtl_nic/rtl8168e-1.fw"
+#define FIRMWARE_8168E_2 "rtl_nic/rtl8168e-2.fw"
#define FIRMWARE_8105E_1 "rtl_nic/rtl8105e-1.fw"
#ifdef RTL8169_DEBUG
@@ -96,77 +98,123 @@
#define RTL_R32(reg) readl (ioaddr + (reg))
enum mac_version {
- RTL_GIGA_MAC_NONE = 0x00,
- RTL_GIGA_MAC_VER_01 = 0x01, // 8169
- RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
- RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
- RTL_GIGA_MAC_VER_04 = 0x04, // 8169SB
- RTL_GIGA_MAC_VER_05 = 0x05, // 8110SCd
- RTL_GIGA_MAC_VER_06 = 0x06, // 8110SCe
- RTL_GIGA_MAC_VER_07 = 0x07, // 8102e
- RTL_GIGA_MAC_VER_08 = 0x08, // 8102e
- RTL_GIGA_MAC_VER_09 = 0x09, // 8102e
- RTL_GIGA_MAC_VER_10 = 0x0a, // 8101e
- RTL_GIGA_MAC_VER_11 = 0x0b, // 8168Bb
- RTL_GIGA_MAC_VER_12 = 0x0c, // 8168Be
- RTL_GIGA_MAC_VER_13 = 0x0d, // 8101Eb
- RTL_GIGA_MAC_VER_14 = 0x0e, // 8101 ?
- RTL_GIGA_MAC_VER_15 = 0x0f, // 8101 ?
- RTL_GIGA_MAC_VER_16 = 0x11, // 8101Ec
- RTL_GIGA_MAC_VER_17 = 0x10, // 8168Bf
- RTL_GIGA_MAC_VER_18 = 0x12, // 8168CP
- RTL_GIGA_MAC_VER_19 = 0x13, // 8168C
- RTL_GIGA_MAC_VER_20 = 0x14, // 8168C
- RTL_GIGA_MAC_VER_21 = 0x15, // 8168C
- RTL_GIGA_MAC_VER_22 = 0x16, // 8168C
- RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP
- RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
- RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
- RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
- RTL_GIGA_MAC_VER_27 = 0x1b, // 8168DP
- RTL_GIGA_MAC_VER_28 = 0x1c, // 8168DP
- RTL_GIGA_MAC_VER_29 = 0x1d, // 8105E
- RTL_GIGA_MAC_VER_30 = 0x1e, // 8105E
+ RTL_GIGA_MAC_VER_01 = 0,
+ RTL_GIGA_MAC_VER_02,
+ RTL_GIGA_MAC_VER_03,
+ RTL_GIGA_MAC_VER_04,
+ RTL_GIGA_MAC_VER_05,
+ RTL_GIGA_MAC_VER_06,
+ RTL_GIGA_MAC_VER_07,
+ RTL_GIGA_MAC_VER_08,
+ RTL_GIGA_MAC_VER_09,
+ RTL_GIGA_MAC_VER_10,
+ RTL_GIGA_MAC_VER_11,
+ RTL_GIGA_MAC_VER_12,
+ RTL_GIGA_MAC_VER_13,
+ RTL_GIGA_MAC_VER_14,
+ RTL_GIGA_MAC_VER_15,
+ RTL_GIGA_MAC_VER_16,
+ RTL_GIGA_MAC_VER_17,
+ RTL_GIGA_MAC_VER_18,
+ RTL_GIGA_MAC_VER_19,
+ RTL_GIGA_MAC_VER_20,
+ RTL_GIGA_MAC_VER_21,
+ RTL_GIGA_MAC_VER_22,
+ RTL_GIGA_MAC_VER_23,
+ RTL_GIGA_MAC_VER_24,
+ RTL_GIGA_MAC_VER_25,
+ RTL_GIGA_MAC_VER_26,
+ RTL_GIGA_MAC_VER_27,
+ RTL_GIGA_MAC_VER_28,
+ RTL_GIGA_MAC_VER_29,
+ RTL_GIGA_MAC_VER_30,
+ RTL_GIGA_MAC_VER_31,
+ RTL_GIGA_MAC_VER_32,
+ RTL_GIGA_MAC_VER_33,
+ RTL_GIGA_MAC_NONE = 0xff,
};
-#define _R(NAME,MAC,MASK) \
- { .name = NAME, .mac_version = MAC, .RxConfigMask = MASK }
+enum rtl_tx_desc_version {
+ RTL_TD_0 = 0,
+ RTL_TD_1 = 1,
+};
+
+#define _R(NAME,TD,FW) \
+ { .name = NAME, .txd_version = TD, .fw_name = FW }
static const struct {
const char *name;
- u8 mac_version;
- u32 RxConfigMask; /* Clears the bits supported by this chip */
-} rtl_chip_info[] = {
- _R("RTL8169", RTL_GIGA_MAC_VER_01, 0xff7e1880), // 8169
- _R("RTL8169s", RTL_GIGA_MAC_VER_02, 0xff7e1880), // 8169S
- _R("RTL8110s", RTL_GIGA_MAC_VER_03, 0xff7e1880), // 8110S
- _R("RTL8169sb/8110sb", RTL_GIGA_MAC_VER_04, 0xff7e1880), // 8169SB
- _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_05, 0xff7e1880), // 8110SCd
- _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_06, 0xff7e1880), // 8110SCe
- _R("RTL8102e", RTL_GIGA_MAC_VER_07, 0xff7e1880), // PCI-E
- _R("RTL8102e", RTL_GIGA_MAC_VER_08, 0xff7e1880), // PCI-E
- _R("RTL8102e", RTL_GIGA_MAC_VER_09, 0xff7e1880), // PCI-E
- _R("RTL8101e", RTL_GIGA_MAC_VER_10, 0xff7e1880), // PCI-E
- _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_11, 0xff7e1880), // PCI-E
- _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_12, 0xff7e1880), // PCI-E
- _R("RTL8101e", RTL_GIGA_MAC_VER_13, 0xff7e1880), // PCI-E 8139
- _R("RTL8100e", RTL_GIGA_MAC_VER_14, 0xff7e1880), // PCI-E 8139
- _R("RTL8100e", RTL_GIGA_MAC_VER_15, 0xff7e1880), // PCI-E 8139
- _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_17, 0xff7e1880), // PCI-E
- _R("RTL8101e", RTL_GIGA_MAC_VER_16, 0xff7e1880), // PCI-E
- _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_18, 0xff7e1880), // PCI-E
- _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_19, 0xff7e1880), // PCI-E
- _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_20, 0xff7e1880), // PCI-E
- _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_21, 0xff7e1880), // PCI-E
- _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E
- _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E
- _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
- _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
- _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
- _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_27, 0xff7e1880), // PCI-E
- _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_28, 0xff7e1880), // PCI-E
- _R("RTL8105e", RTL_GIGA_MAC_VER_29, 0xff7e1880), // PCI-E
- _R("RTL8105e", RTL_GIGA_MAC_VER_30, 0xff7e1880) // PCI-E
+ enum rtl_tx_desc_version txd_version;
+ const char *fw_name;
+} rtl_chip_infos[] = {
+ /* PCI devices. */
+ [RTL_GIGA_MAC_VER_01] =
+ _R("RTL8169", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_02] =
+ _R("RTL8169s", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_03] =
+ _R("RTL8110s", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_04] =
+ _R("RTL8169sb/8110sb", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_05] =
+ _R("RTL8169sc/8110sc", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_06] =
+ _R("RTL8169sc/8110sc", RTL_TD_0, NULL),
+ /* PCI-E devices. */
+ [RTL_GIGA_MAC_VER_07] =
+ _R("RTL8102e", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_08] =
+ _R("RTL8102e", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_09] =
+ _R("RTL8102e", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_10] =
+ _R("RTL8101e", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_11] =
+ _R("RTL8168b/8111b", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_12] =
+ _R("RTL8168b/8111b", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_13] =
+ _R("RTL8101e", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_14] =
+ _R("RTL8100e", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_15] =
+ _R("RTL8100e", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_16] =
+ _R("RTL8101e", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_17] =
+ _R("RTL8168b/8111b", RTL_TD_0, NULL),
+ [RTL_GIGA_MAC_VER_18] =
+ _R("RTL8168cp/8111cp", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_19] =
+ _R("RTL8168c/8111c", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_20] =
+ _R("RTL8168c/8111c", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_21] =
+ _R("RTL8168c/8111c", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_22] =
+ _R("RTL8168c/8111c", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_23] =
+ _R("RTL8168cp/8111cp", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_24] =
+ _R("RTL8168cp/8111cp", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_25] =
+ _R("RTL8168d/8111d", RTL_TD_1, FIRMWARE_8168D_1),
+ [RTL_GIGA_MAC_VER_26] =
+ _R("RTL8168d/8111d", RTL_TD_1, FIRMWARE_8168D_2),
+ [RTL_GIGA_MAC_VER_27] =
+ _R("RTL8168dp/8111dp", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_28] =
+ _R("RTL8168dp/8111dp", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_29] =
+ _R("RTL8105e", RTL_TD_1, FIRMWARE_8105E_1),
+ [RTL_GIGA_MAC_VER_30] =
+ _R("RTL8105e", RTL_TD_1, FIRMWARE_8105E_1),
+ [RTL_GIGA_MAC_VER_31] =
+ _R("RTL8168dp/8111dp", RTL_TD_1, NULL),
+ [RTL_GIGA_MAC_VER_32] =
+ _R("RTL8168e/8111e", RTL_TD_1, FIRMWARE_8168E_1),
+ [RTL_GIGA_MAC_VER_33] =
+ _R("RTL8168e/8111e", RTL_TD_1, FIRMWARE_8168E_2)
};
#undef _R
@@ -222,6 +270,9 @@
IntrStatus = 0x3e,
TxConfig = 0x40,
RxConfig = 0x44,
+
+#define RTL_RX_CONFIG_MASK 0xff7e1880u
+
RxMissed = 0x4c,
Cfg9346 = 0x50,
Config0 = 0x51,
@@ -315,7 +366,9 @@
#define OCPAR_FLAG 0x80000000
#define OCPAR_GPHY_WRITE_CMD 0x8000f060
#define OCPAR_GPHY_READ_CMD 0x0000f060
- RDSAR1 = 0xd0 /* 8168c only. Undocumented on 8168dp */
+ RDSAR1 = 0xd0, /* 8168c only. Undocumented on 8168dp */
+ MISC = 0xf0, /* 8168e only. */
+#define TXPLA_RST (1 << 29)
};
enum rtl_register_content {
@@ -393,6 +446,7 @@
BWF = (1 << 6), /* Accept Broadcast wakeup frame */
MWF = (1 << 5), /* Accept Multicast wakeup frame */
UWF = (1 << 4), /* Accept Unicast wakeup frame */
+ Spi_en = (1 << 3),
LanWake = (1 << 1), /* LanWake enable/disable */
PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
@@ -441,21 +495,69 @@
CounterDump = 0x8,
};
-enum desc_status_bit {
+enum rtl_desc_bit {
+ /* First doubleword. */
DescOwn = (1 << 31), /* Descriptor is owned by NIC */
RingEnd = (1 << 30), /* End of descriptor ring */
FirstFrag = (1 << 29), /* First segment of a packet */
LastFrag = (1 << 28), /* Final segment of a packet */
+};
- /* Tx private */
- LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */
- MSSShift = 16, /* MSS value position */
- MSSMask = 0xfff, /* MSS value + LargeSend bit: 12 bits */
- IPCS = (1 << 18), /* Calculate IP checksum */
- UDPCS = (1 << 17), /* Calculate UDP/IP checksum */
- TCPCS = (1 << 16), /* Calculate TCP/IP checksum */
- TxVlanTag = (1 << 17), /* Add VLAN tag */
+/* Generic case. */
+enum rtl_tx_desc_bit {
+ /* First doubleword. */
+ TD_LSO = (1 << 27), /* Large Send Offload */
+#define TD_MSS_MAX 0x07ffu /* MSS value */
+ /* Second doubleword. */
+ TxVlanTag = (1 << 17), /* Add VLAN tag */
+};
+
+/* 8169, 8168b and 810x except 8102e. */
+enum rtl_tx_desc_bit_0 {
+ /* First doubleword. */
+#define TD0_MSS_SHIFT 16 /* MSS position (11 bits) */
+ TD0_TCP_CS = (1 << 16), /* Calculate TCP/IP checksum */
+ TD0_UDP_CS = (1 << 17), /* Calculate UDP/IP checksum */
+ TD0_IP_CS = (1 << 18), /* Calculate IP checksum */
+};
+
+/* 8102e, 8168c and beyond. */
+enum rtl_tx_desc_bit_1 {
+ /* Second doubleword. */
+#define TD1_MSS_SHIFT 18 /* MSS position (11 bits) */
+ TD1_IP_CS = (1 << 29), /* Calculate IP checksum */
+ TD1_TCP_CS = (1 << 30), /* Calculate TCP/IP checksum */
+ TD1_UDP_CS = (1 << 31), /* Calculate UDP/IP checksum */
+};
+
+static const struct rtl_tx_desc_info {
+ struct {
+ u32 udp;
+ u32 tcp;
+ } checksum;
+ u16 mss_shift;
+ u16 opts_offset;
+} tx_desc_info [] = {
+ [RTL_TD_0] = {
+ .checksum = {
+ .udp = TD0_IP_CS | TD0_UDP_CS,
+ .tcp = TD0_IP_CS | TD0_TCP_CS
+ },
+ .mss_shift = TD0_MSS_SHIFT,
+ .opts_offset = 0
+ },
+ [RTL_TD_1] = {
+ .checksum = {
+ .udp = TD1_IP_CS | TD1_UDP_CS,
+ .tcp = TD1_IP_CS | TD1_TCP_CS
+ },
+ .mss_shift = TD1_MSS_SHIFT,
+ .opts_offset = 1
+ }
+};
+
+enum rtl_rx_desc_bit {
/* Rx private */
PID1 = (1 << 18), /* Protocol ID bit 1/2 */
PID0 = (1 << 17), /* Protocol ID bit 2/2 */
@@ -515,13 +617,13 @@
struct rtl8169_private {
void __iomem *mmio_addr; /* memory map physical address */
- struct pci_dev *pci_dev; /* Index of PCI device */
+ struct pci_dev *pci_dev;
struct net_device *dev;
struct napi_struct napi;
- spinlock_t lock; /* spin lock flag */
+ spinlock_t lock;
u32 msg_enable;
- int chipset;
- int mac_version;
+ u16 txd_version;
+ u16 mac_version;
u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
u32 dirty_rx;
@@ -537,7 +639,6 @@
u16 intr_event;
u16 napi_event;
u16 intr_mask;
- int phy_1000_ctrl_reg;
struct mdio_ops {
void (*write)(void __iomem *, int, int);
@@ -565,6 +666,7 @@
u32 saved_wolopts;
const struct firmware *fw;
+#define RTL_FIRMWARE_UNKNOWN ERR_PTR(-EAGAIN);
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -577,6 +679,8 @@
MODULE_VERSION(RTL8169_VERSION);
MODULE_FIRMWARE(FIRMWARE_8168D_1);
MODULE_FIRMWARE(FIRMWARE_8168D_2);
+MODULE_FIRMWARE(FIRMWARE_8168E_1);
+MODULE_FIRMWARE(FIRMWARE_8168E_2);
MODULE_FIRMWARE(FIRMWARE_8105E_1);
static int rtl8169_open(struct net_device *dev);
@@ -648,32 +752,49 @@
#define OOB_CMD_DRIVER_START 0x05
#define OOB_CMD_DRIVER_STOP 0x06
+static u16 rtl8168_get_ocp_reg(struct rtl8169_private *tp)
+{
+ return (tp->mac_version == RTL_GIGA_MAC_VER_31) ? 0xb8 : 0x10;
+}
+
static void rtl8168_driver_start(struct rtl8169_private *tp)
{
+ u16 reg;
int i;
rtl8168_oob_notify(tp, OOB_CMD_DRIVER_START);
+ reg = rtl8168_get_ocp_reg(tp);
+
for (i = 0; i < 10; i++) {
msleep(10);
- if (ocp_read(tp, 0x0f, 0x0010) & 0x00000800)
+ if (ocp_read(tp, 0x0f, reg) & 0x00000800)
break;
}
}
static void rtl8168_driver_stop(struct rtl8169_private *tp)
{
+ u16 reg;
int i;
rtl8168_oob_notify(tp, OOB_CMD_DRIVER_STOP);
+ reg = rtl8168_get_ocp_reg(tp);
+
for (i = 0; i < 10; i++) {
msleep(10);
- if ((ocp_read(tp, 0x0f, 0x0010) & 0x00000800) == 0)
+ if ((ocp_read(tp, 0x0f, reg) & 0x00000800) == 0)
break;
}
}
+static int r8168dp_check_dash(struct rtl8169_private *tp)
+{
+ u16 reg = rtl8168_get_ocp_reg(tp);
+
+ return (ocp_read(tp, 0x0f, reg) & 0x00008000) ? 1 : 0;
+}
static void r8169_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
@@ -972,9 +1093,8 @@
}
static void __rtl8169_check_link_status(struct net_device *dev,
- struct rtl8169_private *tp,
- void __iomem *ioaddr,
- bool pm)
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr, bool pm)
{
unsigned long flags;
@@ -1091,6 +1211,11 @@
return 0;
}
+static const char *rtl_lookup_firmware_name(struct rtl8169_private *tp)
+{
+ return rtl_chip_infos[tp->mac_version].fw_name;
+}
+
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
@@ -1099,6 +1224,8 @@
strcpy(info->driver, MODULENAME);
strcpy(info->version, RTL8169_VERSION);
strcpy(info->bus_info, pci_name(tp->pci_dev));
+ strncpy(info->fw_version, IS_ERR_OR_NULL(tp->fw) ? "N/A" :
+ rtl_lookup_firmware_name(tp), sizeof(info->fw_version) - 1);
}
static int rtl8169_get_regs_len(struct net_device *dev)
@@ -1160,16 +1287,7 @@
giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
/* The 8100e/8101e/8102e do Fast Ethernet only. */
- if ((tp->mac_version != RTL_GIGA_MAC_VER_07) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_08) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_09) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_10) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_13) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_14) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_16) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_29) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_30)) {
+ if (tp->mii.supports_gmii) {
if (adv & ADVERTISED_1000baseT_Half)
giga_ctrl |= ADVERTISE_1000HALF;
if (adv & ADVERTISED_1000baseT_Full)
@@ -1199,12 +1317,10 @@
bmcr |= BMCR_FULLDPLX;
}
- tp->phy_1000_ctrl_reg = giga_ctrl;
-
rtl_writephy(tp, MII_BMCR, bmcr);
- if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+ if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_03) {
if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
rtl_writephy(tp, 0x17, 0x2138);
rtl_writephy(tp, 0x0e, 0x0260);
@@ -1226,10 +1342,14 @@
int ret;
ret = tp->set_speed(dev, autoneg, speed, duplex, advertising);
+ if (ret < 0)
+ goto out;
- if (netif_running(dev) && (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
+ if (netif_running(dev) && (autoneg == AUTONEG_ENABLE) &&
+ (advertising & ADVERTISED_1000baseT_Full)) {
mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
-
+ }
+out:
return ret;
}
@@ -1239,22 +1359,25 @@
unsigned long flags;
int ret;
+ del_timer_sync(&tp->timer);
+
spin_lock_irqsave(&tp->lock, flags);
- ret = rtl8169_set_speed(dev,
- cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
+ ret = rtl8169_set_speed(dev, cmd->autoneg, ethtool_cmd_speed(cmd),
+ cmd->duplex, cmd->advertising);
spin_unlock_irqrestore(&tp->lock, flags);
return ret;
}
-static u32 rtl8169_get_rx_csum(struct net_device *dev)
+static u32 rtl8169_fix_features(struct net_device *dev, u32 features)
{
- struct rtl8169_private *tp = netdev_priv(dev);
+ if (dev->mtu > TD_MSS_MAX)
+ features &= ~NETIF_F_ALL_TSO;
- return tp->cp_cmd & RxChkSum;
+ return features;
}
-static int rtl8169_set_rx_csum(struct net_device *dev, u32 data)
+static int rtl8169_set_features(struct net_device *dev, u32 features)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
@@ -1262,11 +1385,16 @@
spin_lock_irqsave(&tp->lock, flags);
- if (data)
+ if (features & NETIF_F_RXCSUM)
tp->cp_cmd |= RxChkSum;
else
tp->cp_cmd &= ~RxChkSum;
+ if (dev->features & NETIF_F_HW_VLAN_RX)
+ tp->cp_cmd |= RxVlan;
+ else
+ tp->cp_cmd &= ~RxVlan;
+
RTL_W16(CPlusCmd, tp->cp_cmd);
RTL_R16(CPlusCmd);
@@ -1282,27 +1410,6 @@
TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
}
-#define NETIF_F_HW_VLAN_TX_RX (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX)
-
-static void rtl8169_vlan_mode(struct net_device *dev)
-{
- struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
- unsigned long flags;
-
- spin_lock_irqsave(&tp->lock, flags);
- if (dev->features & NETIF_F_HW_VLAN_RX)
- tp->cp_cmd |= RxVlan;
- else
- tp->cp_cmd &= ~RxVlan;
- RTL_W16(CPlusCmd, tp->cp_cmd);
- /* PCI commit */
- RTL_R16(CPlusCmd);
- spin_unlock_irqrestore(&tp->lock, flags);
-
- dev->vlan_features = dev->features &~ NETIF_F_HW_VLAN_TX_RX;
-}
-
static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb)
{
u32 opts2 = le32_to_cpu(desc->opts2);
@@ -1328,7 +1435,7 @@
cmd->advertising = (status & TBINwEnable) ? ADVERTISED_Autoneg : 0;
cmd->autoneg = !!(status & TBINwEnable);
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
cmd->duplex = DUPLEX_FULL; /* Always set */
return 0;
@@ -1413,11 +1520,11 @@
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
+ struct device *d = &tp->pci_dev->dev;
struct rtl8169_counters *counters;
dma_addr_t paddr;
u32 cmd;
int wait = 1000;
- struct device *d = &tp->pci_dev->dev;
/*
* Some chips are unable to dump tally counters when the receiver
@@ -1437,7 +1544,6 @@
while (wait--) {
if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) {
- /* copy updated counters */
memcpy(&tp->counters, counters, sizeof(*counters));
break;
}
@@ -1483,28 +1589,6 @@
}
}
-static int rtl8169_set_flags(struct net_device *dev, u32 data)
-{
- struct rtl8169_private *tp = netdev_priv(dev);
- unsigned long old_feat = dev->features;
- int rc;
-
- if ((tp->mac_version == RTL_GIGA_MAC_VER_05) &&
- !(data & ETH_FLAG_RXVLAN)) {
- netif_info(tp, drv, dev, "8110SCd requires hardware Rx VLAN\n");
- return -EINVAL;
- }
-
- rc = ethtool_op_set_flags(dev, data, ETH_FLAG_TXVLAN | ETH_FLAG_RXVLAN);
- if (rc)
- return rc;
-
- if ((old_feat ^ dev->features) & NETIF_F_HW_VLAN_RX)
- rtl8169_vlan_mode(dev);
-
- return 0;
-}
-
static const struct ethtool_ops rtl8169_ethtool_ops = {
.get_drvinfo = rtl8169_get_drvinfo,
.get_regs_len = rtl8169_get_regs_len,
@@ -1513,24 +1597,18 @@
.set_settings = rtl8169_set_settings,
.get_msglevel = rtl8169_get_msglevel,
.set_msglevel = rtl8169_set_msglevel,
- .get_rx_csum = rtl8169_get_rx_csum,
- .set_rx_csum = rtl8169_set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
.get_wol = rtl8169_get_wol,
.set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_sset_count = rtl8169_get_sset_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
- .set_flags = rtl8169_set_flags,
- .get_flags = ethtool_op_get_flags,
};
static void rtl8169_get_mac_version(struct rtl8169_private *tp,
- void __iomem *ioaddr)
+ struct net_device *dev, u8 default_version)
{
+ void __iomem *ioaddr = tp->mmio_addr;
/*
* The driver currently handles the 8168Bf and the 8168Be identically
* but they can be identified more specifically through the test below
@@ -1547,6 +1625,11 @@
u32 val;
int mac_version;
} mac_info[] = {
+ /* 8168E family. */
+ { 0x7cf00000, 0x2c200000, RTL_GIGA_MAC_VER_33 },
+ { 0x7cf00000, 0x2c100000, RTL_GIGA_MAC_VER_32 },
+ { 0x7c800000, 0x2c000000, RTL_GIGA_MAC_VER_33 },
+
/* 8168D family. */
{ 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 },
{ 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 },
@@ -1555,6 +1638,7 @@
/* 8168DP family. */
{ 0x7cf00000, 0x28800000, RTL_GIGA_MAC_VER_27 },
{ 0x7cf00000, 0x28a00000, RTL_GIGA_MAC_VER_28 },
+ { 0x7cf00000, 0x28b00000, RTL_GIGA_MAC_VER_31 },
/* 8168C family. */
{ 0x7cf00000, 0x3cb00000, RTL_GIGA_MAC_VER_24 },
@@ -1574,6 +1658,7 @@
{ 0x7c800000, 0x30000000, RTL_GIGA_MAC_VER_11 },
/* 8101 family. */
+ { 0x7cf00000, 0x40b00000, RTL_GIGA_MAC_VER_30 },
{ 0x7cf00000, 0x40a00000, RTL_GIGA_MAC_VER_30 },
{ 0x7cf00000, 0x40900000, RTL_GIGA_MAC_VER_29 },
{ 0x7c800000, 0x40800000, RTL_GIGA_MAC_VER_30 },
@@ -1610,6 +1695,12 @@
while ((reg & p->mask) != p->val)
p++;
tp->mac_version = p->mac_version;
+
+ if (tp->mac_version == RTL_GIGA_MAC_NONE) {
+ netif_notice(tp, probe, dev,
+ "unknown MAC, using family default\n");
+ tp->mac_version = default_version;
+ }
}
static void rtl8169_print_mac_version(struct rtl8169_private *tp)
@@ -1679,14 +1770,14 @@
case PHY_BJMPN:
if (regno > index) {
netif_err(tp, probe, tp->dev,
- "Out of range of firmware\n");
+ "Out of range of firmware\n");
return;
}
break;
case PHY_READCOUNT_EQ_SKIP:
if (index + 2 >= fw_size) {
netif_err(tp, probe, tp->dev,
- "Out of range of firmware\n");
+ "Out of range of firmware\n");
return;
}
break;
@@ -1695,7 +1786,7 @@
case PHY_SKIPN:
if (index + 1 + regno >= fw_size) {
netif_err(tp, probe, tp->dev,
- "Out of range of firmware\n");
+ "Out of range of firmware\n");
return;
}
break;
@@ -1751,10 +1842,7 @@
index++;
break;
case PHY_READCOUNT_EQ_SKIP:
- if (count == data)
- index += 2;
- else
- index += 1;
+ index += (count == data) ? 2 : 1;
break;
case PHY_COMP_EQ_SKIPN:
if (predata == data)
@@ -1789,25 +1877,26 @@
static void rtl_release_firmware(struct rtl8169_private *tp)
{
- release_firmware(tp->fw);
- tp->fw = NULL;
+ if (!IS_ERR_OR_NULL(tp->fw))
+ release_firmware(tp->fw);
+ tp->fw = RTL_FIRMWARE_UNKNOWN;
}
-static int rtl_apply_firmware(struct rtl8169_private *tp, const char *fw_name)
+static void rtl_apply_firmware(struct rtl8169_private *tp)
{
- const struct firmware **fw = &tp->fw;
- int rc = !*fw;
-
- if (rc) {
- rc = request_firmware(fw, fw_name, &tp->pci_dev->dev);
- if (rc < 0)
- goto out;
- }
+ const struct firmware *fw = tp->fw;
/* TODO: release firmware once rtl_phy_write_fw signals failures. */
- rtl_phy_write_fw(tp, *fw);
-out:
- return rc;
+ if (!IS_ERR_OR_NULL(fw))
+ rtl_phy_write_fw(tp, fw);
+}
+
+static void rtl_apply_firmware_cond(struct rtl8169_private *tp, u8 reg, u16 val)
+{
+ if (rtl_readphy(tp, reg) != val)
+ netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
+ else
+ rtl_apply_firmware(tp);
}
static void rtl8169s_hw_phy_config(struct rtl8169_private *tp)
@@ -2164,7 +2253,7 @@
/*
* Tx Error Issue
- * enhance line driver power
+ * Enhance line driver power
*/
{ 0x1f, 0x0002 },
{ 0x06, 0x5561 },
@@ -2246,10 +2335,8 @@
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
- if ((rtl_readphy(tp, 0x06) != 0xbf00) ||
- (rtl_apply_firmware(tp, FIRMWARE_8168D_1) < 0)) {
- netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
- }
+
+ rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xbf00);
rtl_writephy(tp, 0x1f, 0x0000);
}
@@ -2278,7 +2365,7 @@
/*
* Tx Error Issue
- * enhance line driver power
+ * Enhance line driver power
*/
{ 0x1f, 0x0002 },
{ 0x06, 0x5561 },
@@ -2351,10 +2438,8 @@
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
- if ((rtl_readphy(tp, 0x06) != 0xb300) ||
- (rtl_apply_firmware(tp, FIRMWARE_8168D_2) < 0)) {
- netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
- }
+
+ rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xb300);
rtl_writephy(tp, 0x1f, 0x0000);
}
@@ -2436,6 +2521,79 @@
rtl_patchphy(tp, 0x0d, 1 << 5);
}
+static void rtl8168e_hw_phy_config(struct rtl8169_private *tp)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ /* Enable Delay cap */
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8b80 },
+ { 0x06, 0xc896 },
+ { 0x1f, 0x0000 },
+
+ /* Channel estimation fine tune */
+ { 0x1f, 0x0001 },
+ { 0x0b, 0x6c20 },
+ { 0x07, 0x2872 },
+ { 0x1c, 0xefff },
+ { 0x1f, 0x0003 },
+ { 0x14, 0x6420 },
+ { 0x1f, 0x0000 },
+
+ /* Update PFM & 10M TX idle timer */
+ { 0x1f, 0x0007 },
+ { 0x1e, 0x002f },
+ { 0x15, 0x1919 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0007 },
+ { 0x1e, 0x00ac },
+ { 0x18, 0x0006 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_apply_firmware(tp);
+
+ rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ /* DCO enable for 10M IDLE Power */
+ rtl_writephy(tp, 0x1f, 0x0007);
+ rtl_writephy(tp, 0x1e, 0x0023);
+ rtl_w1w0_phy(tp, 0x17, 0x0006, 0x0000);
+ rtl_writephy(tp, 0x1f, 0x0000);
+
+ /* For impedance matching */
+ rtl_writephy(tp, 0x1f, 0x0002);
+ rtl_w1w0_phy(tp, 0x08, 0x8000, 0x7f00);
+ rtl_writephy(tp, 0x1f, 0x0000);
+
+ /* PHY auto speed down */
+ rtl_writephy(tp, 0x1f, 0x0007);
+ rtl_writephy(tp, 0x1e, 0x002d);
+ rtl_w1w0_phy(tp, 0x18, 0x0050, 0x0000);
+ rtl_writephy(tp, 0x1f, 0x0000);
+ rtl_w1w0_phy(tp, 0x14, 0x8000, 0x0000);
+
+ rtl_writephy(tp, 0x1f, 0x0005);
+ rtl_writephy(tp, 0x05, 0x8b86);
+ rtl_w1w0_phy(tp, 0x06, 0x0001, 0x0000);
+ rtl_writephy(tp, 0x1f, 0x0000);
+
+ rtl_writephy(tp, 0x1f, 0x0005);
+ rtl_writephy(tp, 0x05, 0x8b85);
+ rtl_w1w0_phy(tp, 0x06, 0x0000, 0x2000);
+ rtl_writephy(tp, 0x1f, 0x0007);
+ rtl_writephy(tp, 0x1e, 0x0020);
+ rtl_w1w0_phy(tp, 0x15, 0x0000, 0x1100);
+ rtl_writephy(tp, 0x1f, 0x0006);
+ rtl_writephy(tp, 0x00, 0x5a00);
+ rtl_writephy(tp, 0x1f, 0x0000);
+ rtl_writephy(tp, 0x0d, 0x0007);
+ rtl_writephy(tp, 0x0e, 0x003c);
+ rtl_writephy(tp, 0x0d, 0x4007);
+ rtl_writephy(tp, 0x0e, 0x0000);
+ rtl_writephy(tp, 0x0d, 0x0000);
+}
+
static void rtl8102e_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
@@ -2474,8 +2632,7 @@
rtl_writephy(tp, 0x18, 0x0310);
msleep(100);
- if (rtl_apply_firmware(tp, FIRMWARE_8105E_1) < 0)
- netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
+ rtl_apply_firmware(tp);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
@@ -2551,6 +2708,13 @@
case RTL_GIGA_MAC_VER_30:
rtl8105e_hw_phy_config(tp);
break;
+ case RTL_GIGA_MAC_VER_31:
+ /* None. */
+ break;
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
+ rtl8168e_hw_phy_config(tp);
+ break;
default:
break;
@@ -2567,9 +2731,6 @@
assert(tp->mac_version > RTL_GIGA_MAC_VER_01);
- if (!(tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
- return;
-
spin_lock_irq(&tp->lock);
if (tp->phy_reset_pending(tp)) {
@@ -2594,28 +2755,6 @@
spin_unlock_irq(&tp->lock);
}
-static inline void rtl8169_delete_timer(struct net_device *dev)
-{
- struct rtl8169_private *tp = netdev_priv(dev);
- struct timer_list *timer = &tp->timer;
-
- if (tp->mac_version <= RTL_GIGA_MAC_VER_01)
- return;
-
- del_timer_sync(timer);
-}
-
-static inline void rtl8169_request_timer(struct net_device *dev)
-{
- struct rtl8169_private *tp = netdev_priv(dev);
- struct timer_list *timer = &tp->timer;
-
- if (tp->mac_version <= RTL_GIGA_MAC_VER_01)
- return;
-
- mod_timer(timer, jiffies + RTL8169_PHY_TIMEOUT);
-}
-
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
@@ -2683,11 +2822,11 @@
rtl8169_phy_reset(dev, tp);
rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
- ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
- (tp->mii.supports_gmii ?
- ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full : 0));
+ ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
+ (tp->mii.supports_gmii ?
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full : 0));
if (RTL_R8(PHYstatus) & TBI_Enable)
netif_info(tp, link, dev, "TBI auto-negotiating\n");
@@ -2740,7 +2879,8 @@
return netif_running(dev) ? tp->do_ioctl(tp, data, cmd) : -ENODEV;
}
-static int rtl_xmii_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
+static int rtl_xmii_ioctl(struct rtl8169_private *tp,
+ struct mii_ioctl_data *data, int cmd)
{
switch (cmd) {
case SIOCGMIIPHY:
@@ -2840,6 +2980,8 @@
.ndo_tx_timeout = rtl8169_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = rtl8169_change_mtu,
+ .ndo_fix_features = rtl8169_fix_features,
+ .ndo_set_features = rtl8169_set_features,
.ndo_set_mac_address = rtl_set_mac_address,
.ndo_do_ioctl = rtl8169_ioctl,
.ndo_set_multicast_list = rtl_set_rx_mode,
@@ -2859,6 +3001,7 @@
ops->read = r8168dp_1_mdio_read;
break;
case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
ops->write = r8168dp_2_mdio_write;
ops->read = r8168dp_2_mdio_read;
break;
@@ -2900,33 +3043,82 @@
static void r8168_phy_power_up(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, 0x0e, 0x0000);
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_11:
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_17:
+ case RTL_GIGA_MAC_VER_18:
+ case RTL_GIGA_MAC_VER_19:
+ case RTL_GIGA_MAC_VER_20:
+ case RTL_GIGA_MAC_VER_21:
+ case RTL_GIGA_MAC_VER_22:
+ case RTL_GIGA_MAC_VER_23:
+ case RTL_GIGA_MAC_VER_24:
+ case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
+ case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
+ rtl_writephy(tp, 0x0e, 0x0000);
+ break;
+ default:
+ break;
+ }
rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE);
}
static void r8168_phy_power_down(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, 0x0e, 0x0200);
- rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
+ rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE | BMCR_PDOWN);
+ break;
+
+ case RTL_GIGA_MAC_VER_11:
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_17:
+ case RTL_GIGA_MAC_VER_18:
+ case RTL_GIGA_MAC_VER_19:
+ case RTL_GIGA_MAC_VER_20:
+ case RTL_GIGA_MAC_VER_21:
+ case RTL_GIGA_MAC_VER_22:
+ case RTL_GIGA_MAC_VER_23:
+ case RTL_GIGA_MAC_VER_24:
+ case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
+ case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
+ rtl_writephy(tp, 0x0e, 0x0200);
+ default:
+ rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
+ break;
+ }
}
static void r8168_pll_power_down(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
- if (((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_28)) &&
- (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) {
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_31) &&
+ r8168dp_check_dash(tp)) {
return;
}
- if (((tp->mac_version == RTL_GIGA_MAC_VER_23) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_24)) &&
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_23 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_24) &&
(RTL_R16(CPlusCmd) & ASF)) {
return;
}
+ if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_33)
+ rtl_ephy_write(ioaddr, 0x19, 0xff64);
+
if (__rtl8169_get_wol(tp) & WAKE_ANY) {
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, 0x0000);
@@ -2943,6 +3135,9 @@
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80);
break;
}
@@ -2952,9 +3147,10 @@
{
void __iomem *ioaddr = tp->mmio_addr;
- if (((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_28)) &&
- (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) {
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_31) &&
+ r8168dp_check_dash(tp)) {
return;
}
@@ -2963,6 +3159,9 @@
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
break;
}
@@ -3017,6 +3216,9 @@
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
ops->down = r8168_pll_power_down;
ops->up = r8168_pll_power_up;
break;
@@ -3028,6 +3230,22 @@
}
}
+static void rtl_hw_reset(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 0; i < 100; i++) {
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ msleep_interruptible(1);
+ }
+}
+
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -3037,7 +3255,7 @@
struct mii_if_info *mii;
struct net_device *dev;
void __iomem *ioaddr;
- unsigned int i;
+ int chipset, i;
int rc;
if (netif_msg_drv(&debug)) {
@@ -3127,6 +3345,7 @@
rc = -EIO;
goto err_out_free_res_3;
}
+ tp->mmio_addr = ioaddr;
tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!tp->pcie_cap)
@@ -3134,22 +3353,14 @@
RTL_W16(IntrMask, 0x0000);
- /* Soft reset the chip. */
- RTL_W8(ChipCmd, CmdReset);
-
- /* Check that the chip has finished the reset. */
- for (i = 0; i < 100; i++) {
- if ((RTL_R8(ChipCmd) & CmdReset) == 0)
- break;
- msleep_interruptible(1);
- }
+ rtl_hw_reset(tp);
RTL_W16(IntrStatus, 0xffff);
pci_set_master(pdev);
/* Identify chip attached to board */
- rtl8169_get_mac_version(tp, ioaddr);
+ rtl8169_get_mac_version(tp, dev, cfg->default_ver);
/*
* Pretend we are using VLANs; This bypasses a nasty bug where
@@ -3161,25 +3372,10 @@
rtl_init_mdio_ops(tp);
rtl_init_pll_power_ops(tp);
- /* Use appropriate default if unknown */
- if (tp->mac_version == RTL_GIGA_MAC_NONE) {
- netif_notice(tp, probe, dev,
- "unknown MAC, using family default\n");
- tp->mac_version = cfg->default_ver;
- }
-
rtl8169_print_mac_version(tp);
- for (i = 0; i < ARRAY_SIZE(rtl_chip_info); i++) {
- if (tp->mac_version == rtl_chip_info[i].mac_version)
- break;
- }
- if (i == ARRAY_SIZE(rtl_chip_info)) {
- dev_err(&pdev->dev,
- "driver bug, MAC version not found in rtl_chip_info\n");
- goto err_out_msi_4;
- }
- tp->chipset = i;
+ chipset = tp->mac_version;
+ tp->txd_version = rtl_chip_infos[chipset].txd_version;
RTL_W8(Cfg9346, Cfg9346_Unlock);
RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
@@ -3199,8 +3395,6 @@
tp->phy_reset_pending = rtl8169_tbi_reset_pending;
tp->link_ok = rtl8169_tbi_link_ok;
tp->do_ioctl = rtl_tbi_ioctl;
-
- tp->phy_1000_ctrl_reg = ADVERTISE_1000FULL; /* Implied by TBI */
} else {
tp->set_speed = rtl8169_set_speed_xmii;
tp->get_settings = rtl8169_gset_xmii;
@@ -3212,8 +3406,6 @@
spin_lock_init(&tp->lock);
- tp->mmio_addr = ioaddr;
-
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
@@ -3226,7 +3418,19 @@
netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
- dev->features |= NETIF_F_HW_VLAN_TX_RX | NETIF_F_GRO;
+ /* don't enable SG, IP_CSUM and TSO by default - it might not work
+ * properly for all devices */
+ dev->features |= NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+ NETIF_F_HIGHDMA;
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+ /* 8110SCd requires hardware Rx VLAN - disallow toggling */
+ dev->hw_features &= ~NETIF_F_HW_VLAN_RX;
tp->intr_mask = 0xffff;
tp->hw_start = cfg->hw_start;
@@ -3237,6 +3441,8 @@
tp->timer.data = (unsigned long) dev;
tp->timer.function = rtl8169_phy_timer;
+ tp->fw = RTL_FIRMWARE_UNKNOWN;
+
rc = register_netdev(dev);
if (rc < 0)
goto err_out_msi_4;
@@ -3244,12 +3450,12 @@
pci_set_drvdata(pdev, dev);
netif_info(tp, probe, dev, "%s at 0x%lx, %pM, XID %08x IRQ %d\n",
- rtl_chip_info[tp->chipset].name,
- dev->base_addr, dev->dev_addr,
+ rtl_chip_infos[chipset].name, dev->base_addr, dev->dev_addr,
(u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
- if ((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_28)) {
+ if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_31) {
rtl8168_driver_start(tp);
}
@@ -3281,17 +3487,18 @@
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
- if ((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_28)) {
+ if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_31) {
rtl8168_driver_stop(tp);
}
cancel_delayed_work_sync(&tp->task);
- rtl_release_firmware(tp);
-
unregister_netdev(dev);
+ rtl_release_firmware(tp);
+
if (pci_dev_run_wake(pdev))
pm_runtime_get_noresume(&pdev->dev);
@@ -3303,6 +3510,27 @@
pci_set_drvdata(pdev, NULL);
}
+static void rtl_request_firmware(struct rtl8169_private *tp)
+{
+ /* Return early if the firmware is already loaded / cached. */
+ if (IS_ERR(tp->fw)) {
+ const char *name;
+
+ name = rtl_lookup_firmware_name(tp);
+ if (name) {
+ int rc;
+
+ rc = request_firmware(&tp->fw, name, &tp->pci_dev->dev);
+ if (rc >= 0)
+ return;
+
+ netif_warn(tp, ifup, tp->dev, "unable to load "
+ "firmware patch %s (%d)\n", name, rc);
+ }
+ tp->fw = NULL;
+ }
+}
+
static int rtl8169_open(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
@@ -3334,24 +3562,24 @@
smp_mb();
+ rtl_request_firmware(tp);
+
retval = request_irq(dev->irq, rtl8169_interrupt,
(tp->features & RTL_FEATURE_MSI) ? 0 : IRQF_SHARED,
dev->name, dev);
if (retval < 0)
- goto err_release_ring_2;
+ goto err_release_fw_2;
napi_enable(&tp->napi);
rtl8169_init_phy(dev, tp);
- rtl8169_vlan_mode(dev);
+ rtl8169_set_features(dev, dev->features);
rtl_pll_power_up(tp);
rtl_hw_start(dev);
- rtl8169_request_timer(dev);
-
tp->saved_wolopts = 0;
pm_runtime_put_noidle(&pdev->dev);
@@ -3359,7 +3587,8 @@
out:
return retval;
-err_release_ring_2:
+err_release_fw_2:
+ rtl_release_firmware(tp);
rtl8169_rx_clear(tp);
err_free_rx_1:
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
@@ -3382,7 +3611,8 @@
rtl8169_irq_mask_and_ack(ioaddr);
if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
- tp->mac_version == RTL_GIGA_MAC_VER_28) {
+ tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_31) {
while (RTL_R8(TxPoll) & NPQ)
udelay(20);
@@ -3400,7 +3630,7 @@
void __iomem *ioaddr = tp->mmio_addr;
u32 cfg = rtl8169_rx_config;
- cfg |= (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ cfg |= (RTL_R32(RxConfig) & RTL_RX_CONFIG_MASK);
RTL_W32(RxConfig, cfg);
/* Set DMA burst size and Interframe Gap Time */
@@ -3411,25 +3641,14 @@
static void rtl_hw_start(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
- unsigned int i;
- /* Soft reset the chip. */
- RTL_W8(ChipCmd, CmdReset);
-
- /* Check that the chip has finished the reset. */
- for (i = 0; i < 100; i++) {
- if ((RTL_R8(ChipCmd) & CmdReset) == 0)
- break;
- msleep_interruptible(1);
- }
+ rtl_hw_reset(tp);
tp->hw_start(dev);
netif_start_queue(dev);
}
-
static void rtl_set_rx_tx_desc_registers(struct rtl8169_private *tp,
void __iomem *ioaddr)
{
@@ -3495,26 +3714,26 @@
}
RTL_W8(Cfg9346, Cfg9346_Unlock);
- if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_03 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_04)
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
RTL_W8(EarlyTxThres, NoEarlyTx);
rtl_set_rx_max_size(ioaddr, rx_buf_sz);
- if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_03 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_04)
rtl_set_rx_tx_config_registers(tp);
tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
- if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+ if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_03) {
dprintk("Set MAC Reg C+CR Offset 0xE0. "
"Bit-3 and bit-14 MUST be 1\n");
tp->cp_cmd |= (1 << 14);
@@ -3532,10 +3751,10 @@
rtl_set_rx_tx_desc_registers(tp, ioaddr);
- if ((tp->mac_version != RTL_GIGA_MAC_VER_01) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_02) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_03) &&
- (tp->mac_version != RTL_GIGA_MAC_VER_04)) {
+ if (tp->mac_version != RTL_GIGA_MAC_VER_01 &&
+ tp->mac_version != RTL_GIGA_MAC_VER_02 &&
+ tp->mac_version != RTL_GIGA_MAC_VER_03 &&
+ tp->mac_version != RTL_GIGA_MAC_VER_04) {
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
}
@@ -3779,6 +3998,17 @@
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
+static void rtl_hw_start_8168dp(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable_1(ioaddr);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W8(MaxTxPacketSize, TxPacketMax);
+
+ rtl_disable_clock_request(pdev);
+}
+
static void rtl_hw_start_8168d_4(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168d_4[] = {
@@ -3805,6 +4035,41 @@
rtl_enable_clock_request(pdev);
}
+static void rtl_hw_start_8168e(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168e[] = {
+ { 0x00, 0x0200, 0x0100 },
+ { 0x00, 0x0000, 0x0004 },
+ { 0x06, 0x0002, 0x0001 },
+ { 0x06, 0x0000, 0x0030 },
+ { 0x07, 0x0000, 0x2000 },
+ { 0x00, 0x0000, 0x0020 },
+ { 0x03, 0x5800, 0x2000 },
+ { 0x03, 0x0000, 0x0001 },
+ { 0x01, 0x0800, 0x1000 },
+ { 0x07, 0x0000, 0x4000 },
+ { 0x1e, 0x0000, 0x2000 },
+ { 0x19, 0xffff, 0xfe6c },
+ { 0x0a, 0x0000, 0x0040 }
+ };
+
+ rtl_csi_access_enable_2(ioaddr);
+
+ rtl_ephy_init(ioaddr, e_info_8168e, ARRAY_SIZE(e_info_8168e));
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W8(MaxTxPacketSize, TxPacketMax);
+
+ rtl_disable_clock_request(pdev);
+
+ /* Reset tx FIFO pointer */
+ RTL_W32(MISC, RTL_R32(MISC) | TXPLA_RST);
+ RTL_W32(MISC, RTL_R32(MISC) & ~TXPLA_RST);
+
+ RTL_W8(Config5, RTL_R8(Config5) & ~Spi_en);
+}
+
static void rtl_hw_start_8168(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
@@ -3842,55 +4107,64 @@
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_11:
rtl_hw_start_8168bb(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_17:
rtl_hw_start_8168bef(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_18:
rtl_hw_start_8168cp_1(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_19:
rtl_hw_start_8168c_1(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_20:
rtl_hw_start_8168c_2(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_21:
rtl_hw_start_8168c_3(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_22:
rtl_hw_start_8168c_4(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_23:
rtl_hw_start_8168cp_2(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_24:
rtl_hw_start_8168cp_3(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
rtl_hw_start_8168d(ioaddr, pdev);
- break;
+ break;
case RTL_GIGA_MAC_VER_28:
rtl_hw_start_8168d_4(ioaddr, pdev);
- break;
+ break;
+
+ case RTL_GIGA_MAC_VER_31:
+ rtl_hw_start_8168dp(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
+ rtl_hw_start_8168e(ioaddr, pdev);
+ break;
default:
printk(KERN_ERR PFX "%s: unknown chipset (mac_version = %d).\n",
dev->name, tp->mac_version);
- break;
+ break;
}
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
@@ -3974,10 +4248,10 @@
{ 0x0a, 0, 0x0020 }
};
- /* Force LAN exit from ASPM if Rx/Tx are not idel */
+ /* Force LAN exit from ASPM if Rx/Tx are not idle */
RTL_W32(FuncEvent, RTL_R32(FuncEvent) | 0x002800);
- /* disable Early Tally Counter */
+ /* Disable Early Tally Counter */
RTL_W32(FuncEvent, RTL_R32(FuncEvent) & ~0x010000);
RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET);
@@ -3998,8 +4272,8 @@
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
- if ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
- (tp->mac_version == RTL_GIGA_MAC_VER_16)) {
+ if (tp->mac_version == RTL_GIGA_MAC_VER_13 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_16) {
int cap = tp->pcie_cap;
if (cap) {
@@ -4062,6 +4336,8 @@
return -EINVAL;
dev->mtu = new_mtu;
+ netdev_update_features(dev);
+
return 0;
}
@@ -4299,6 +4575,7 @@
struct rtl8169_private *tp =
container_of(work, struct rtl8169_private, task.work);
struct net_device *dev = tp->dev;
+ int i;
rtnl_lock();
@@ -4307,19 +4584,15 @@
rtl8169_wait_for_quiescence(dev);
- rtl8169_rx_interrupt(dev, tp, tp->mmio_addr, ~(u32)0);
+ for (i = 0; i < NUM_RX_DESC; i++)
+ rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz);
+
rtl8169_tx_clear(tp);
- if (tp->dirty_rx == tp->cur_rx) {
- rtl8169_init_ring_indexes(tp);
- rtl_hw_start(dev);
- netif_wake_queue(dev);
- rtl8169_check_link_status(dev, tp, tp->mmio_addr);
- } else {
- if (net_ratelimit())
- netif_emerg(tp, intr, dev, "Rx buffers shortage\n");
- rtl8169_schedule_work(dev, rtl8169_reset_task);
- }
+ rtl8169_init_ring_indexes(tp);
+ rtl_hw_start(dev);
+ netif_wake_queue(dev);
+ rtl8169_check_link_status(dev, tp, tp->mmio_addr);
out_unlock:
rtnl_unlock();
@@ -4336,7 +4609,7 @@
}
static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
- u32 opts1)
+ u32 *opts)
{
struct skb_shared_info *info = skb_shinfo(skb);
unsigned int cur_frag, entry;
@@ -4363,10 +4636,12 @@
goto err_out;
}
- /* anti gcc 2.95.3 bugware (sic) */
- status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+ /* Anti gcc 2.95.3 bugware (sic) */
+ status = opts[0] | len |
+ (RingEnd * !((entry + 1) % NUM_TX_DESC));
txd->opts1 = cpu_to_le32(status);
+ txd->opts2 = cpu_to_le32(opts[1]);
txd->addr = cpu_to_le64(mapping);
tp->tx_skb[entry].len = len;
@@ -4384,24 +4659,26 @@
return -EIO;
}
-static inline u32 rtl8169_tso_csum(struct sk_buff *skb, struct net_device *dev)
+static inline void rtl8169_tso_csum(struct rtl8169_private *tp,
+ struct sk_buff *skb, u32 *opts)
{
- if (dev->features & NETIF_F_TSO) {
- u32 mss = skb_shinfo(skb)->gso_size;
+ const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version;
+ u32 mss = skb_shinfo(skb)->gso_size;
+ int offset = info->opts_offset;
- if (mss)
- return LargeSend | ((mss & MSSMask) << MSSShift);
- }
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (mss) {
+ opts[0] |= TD_LSO;
+ opts[offset] |= min(mss, TD_MSS_MAX) << info->mss_shift;
+ } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
const struct iphdr *ip = ip_hdr(skb);
if (ip->protocol == IPPROTO_TCP)
- return IPCS | TCPCS;
+ opts[offset] |= info->checksum.tcp;
else if (ip->protocol == IPPROTO_UDP)
- return IPCS | UDPCS;
- WARN_ON(1); /* we need a WARN() */
+ opts[offset] |= info->checksum.udp;
+ else
+ WARN_ON_ONCE(1);
}
- return 0;
}
static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
@@ -4414,7 +4691,7 @@
struct device *d = &tp->pci_dev->dev;
dma_addr_t mapping;
u32 status, len;
- u32 opts1;
+ u32 opts[2];
int frags;
if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
@@ -4435,31 +4712,35 @@
tp->tx_skb[entry].len = len;
txd->addr = cpu_to_le64(mapping);
- txd->opts2 = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
- opts1 = DescOwn | rtl8169_tso_csum(skb, dev);
+ opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
+ opts[0] = DescOwn;
- frags = rtl8169_xmit_frags(tp, skb, opts1);
+ rtl8169_tso_csum(tp, skb, opts);
+
+ frags = rtl8169_xmit_frags(tp, skb, opts);
if (frags < 0)
goto err_dma_1;
else if (frags)
- opts1 |= FirstFrag;
+ opts[0] |= FirstFrag;
else {
- opts1 |= FirstFrag | LastFrag;
+ opts[0] |= FirstFrag | LastFrag;
tp->tx_skb[entry].skb = skb;
}
+ txd->opts2 = cpu_to_le32(opts[1]);
+
wmb();
- /* anti gcc 2.95.3 bugware (sic) */
- status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+ /* Anti gcc 2.95.3 bugware (sic) */
+ status = opts[0] | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
txd->opts1 = cpu_to_le32(status);
tp->cur_tx += frags + 1;
wmb();
- RTL_W8(TxPoll, NPQ); /* set polling bit */
+ RTL_W8(TxPoll, NPQ);
if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) {
netif_stop_queue(dev);
@@ -4616,20 +4897,12 @@
return skb;
}
-/*
- * Warning : rtl8169_rx_interrupt() might be called :
- * 1) from NAPI (softirq) context
- * (polling = 1 : we should call netif_receive_skb())
- * 2) from process context (rtl8169_reset_task())
- * (polling = 0 : we must call netif_rx() instead)
- */
static int rtl8169_rx_interrupt(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr, u32 budget)
{
unsigned int cur_rx, rx_left;
unsigned int count;
- int polling = (budget != ~(u32)0) ? 1 : 0;
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
@@ -4689,10 +4962,7 @@
rtl8169_rx_vlan_tag(desc, skb);
- if (likely(polling))
- napi_gro_receive(&tp->napi, skb);
- else
- netif_rx(skb);
+ napi_gro_receive(&tp->napi, skb);
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
@@ -4755,6 +5025,7 @@
case RTL_GIGA_MAC_VER_24:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
/* Experimental science. Pktgen proof. */
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_25:
@@ -4847,7 +5118,7 @@
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
- rtl8169_delete_timer(dev);
+ del_timer_sync(&tp->timer);
netif_stop_queue(dev);
@@ -4884,7 +5155,7 @@
pm_runtime_get_sync(&pdev->dev);
- /* update counters before going down */
+ /* Update counters before going down */
rtl8169_update_counters(dev);
rtl8169_down(dev);
@@ -4939,7 +5210,7 @@
spin_lock_irqsave(&tp->lock, flags);
tmp = rtl8169_rx_config | rx_mode |
- (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ (RTL_R32(RxConfig) & RTL_RX_CONFIG_MASK);
if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
u32 data = mc_filter[0];
@@ -5077,15 +5348,15 @@
}
static const struct dev_pm_ops rtl8169_pm_ops = {
- .suspend = rtl8169_suspend,
- .resume = rtl8169_resume,
- .freeze = rtl8169_suspend,
- .thaw = rtl8169_resume,
- .poweroff = rtl8169_suspend,
- .restore = rtl8169_resume,
- .runtime_suspend = rtl8169_runtime_suspend,
- .runtime_resume = rtl8169_runtime_resume,
- .runtime_idle = rtl8169_runtime_idle,
+ .suspend = rtl8169_suspend,
+ .resume = rtl8169_resume,
+ .freeze = rtl8169_suspend,
+ .thaw = rtl8169_resume,
+ .poweroff = rtl8169_suspend,
+ .restore = rtl8169_resume,
+ .runtime_suspend = rtl8169_runtime_suspend,
+ .runtime_resume = rtl8169_runtime_resume,
+ .runtime_idle = rtl8169_runtime_idle,
};
#define RTL8169_PM_OPS (&rtl8169_pm_ops)
@@ -5104,7 +5375,7 @@
rtl8169_net_suspend(dev);
- /* restore original MAC address */
+ /* Restore original MAC address */
rtl_rar_set(tp, dev->perm_addr);
spin_lock_irq(&tp->lock);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 337bdcd..89cfee7 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2244,13 +2244,12 @@
static void fix_mac_address(struct s2io_nic *sp)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- u64 val64;
int i = 0;
while (fix_mac[i] != END_SIGN) {
writeq(fix_mac[i++], &bar0->gpio_control);
udelay(10);
- val64 = readq(&bar0->gpio_control);
+ (void) readq(&bar0->gpio_control);
}
}
@@ -2727,7 +2726,6 @@
int j;
struct sk_buff *skb;
struct RxD_t *rxdp;
- struct buffAdd *ba;
struct RxD1 *rxdp1;
struct RxD3 *rxdp3;
struct mac_info *mac_control = &sp->mac_control;
@@ -2751,7 +2749,6 @@
memset(rxdp, 0, sizeof(struct RxD1));
} else if (sp->rxd_mode == RXD_MODE_3B) {
rxdp3 = (struct RxD3 *)rxdp;
- ba = &mac_control->rings[ring_no].ba[blk][j];
pci_unmap_single(sp->pdev,
(dma_addr_t)rxdp3->Buffer0_ptr,
BUF0_LEN,
@@ -5383,7 +5380,7 @@
{
struct s2io_nic *sp = netdev_priv(dev);
if ((info->autoneg == AUTONEG_ENABLE) ||
- (info->speed != SPEED_10000) ||
+ (ethtool_cmd_speed(info) != SPEED_10000) ||
(info->duplex != DUPLEX_FULL))
return -EINVAL;
else {
@@ -5417,10 +5414,10 @@
info->transceiver = XCVR_EXTERNAL;
if (netif_carrier_ok(sp->dev)) {
- info->speed = 10000;
+ ethtool_cmd_speed_set(info, SPEED_10000);
info->duplex = DUPLEX_FULL;
} else {
- info->speed = -1;
+ ethtool_cmd_speed_set(info, -1);
info->duplex = -1;
}
@@ -5484,83 +5481,79 @@
}
}
-/**
- * s2io_phy_id - timer function that alternates adapter LED.
- * @data : address of the private member of the device structure, which
- * is a pointer to the s2io_nic structure, provided as an u32.
- * Description: This is actually the timer function that alternates the
- * adapter LED bit of the adapter control bit to set/reset every time on
- * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
- * once every second.
+/*
+ * s2io_set_led - control NIC led
*/
-static void s2io_phy_id(unsigned long data)
+static void s2io_set_led(struct s2io_nic *sp, bool on)
{
- struct s2io_nic *sp = (struct s2io_nic *)data;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- u64 val64 = 0;
- u16 subid;
+ u16 subid = sp->pdev->subsystem_device;
+ u64 val64;
- subid = sp->pdev->subsystem_device;
if ((sp->device_type == XFRAME_II_DEVICE) ||
((subid & 0xFF) >= 0x07)) {
val64 = readq(&bar0->gpio_control);
- val64 ^= GPIO_CTRL_GPIO_0;
+ if (on)
+ val64 |= GPIO_CTRL_GPIO_0;
+ else
+ val64 &= ~GPIO_CTRL_GPIO_0;
+
writeq(val64, &bar0->gpio_control);
} else {
val64 = readq(&bar0->adapter_control);
- val64 ^= ADAPTER_LED_ON;
+ if (on)
+ val64 |= ADAPTER_LED_ON;
+ else
+ val64 &= ~ADAPTER_LED_ON;
+
writeq(val64, &bar0->adapter_control);
}
- mod_timer(&sp->id_timer, jiffies + HZ / 2);
}
/**
- * s2io_ethtool_idnic - To physically identify the nic on the system.
- * @sp : private member of the device structure, which is a pointer to the
- * s2io_nic structure.
- * @id : pointer to the structure with identification parameters given by
- * ethtool.
+ * s2io_ethtool_set_led - To physically identify the nic on the system.
+ * @dev : network device
+ * @state: led setting
+ *
* Description: Used to physically identify the NIC on the system.
* The Link LED will blink for a time specified by the user for
* identification.
* NOTE: The Link has to be Up to be able to blink the LED. Hence
* identification is possible only if it's link is up.
- * Return value:
- * int , returns 0 on success
*/
-static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
+static int s2io_ethtool_set_led(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
- u64 val64 = 0, last_gpio_ctrl_val;
struct s2io_nic *sp = netdev_priv(dev);
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- u16 subid;
+ u16 subid = sp->pdev->subsystem_device;
- subid = sp->pdev->subsystem_device;
- last_gpio_ctrl_val = readq(&bar0->gpio_control);
if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) {
- val64 = readq(&bar0->adapter_control);
+ u64 val64 = readq(&bar0->adapter_control);
if (!(val64 & ADAPTER_CNTL_EN)) {
pr_err("Adapter Link down, cannot blink LED\n");
- return -EFAULT;
+ return -EAGAIN;
}
}
- if (sp->id_timer.function == NULL) {
- init_timer(&sp->id_timer);
- sp->id_timer.function = s2io_phy_id;
- sp->id_timer.data = (unsigned long)sp;
- }
- mod_timer(&sp->id_timer, jiffies);
- if (data)
- msleep_interruptible(data * HZ);
- else
- msleep_interruptible(MAX_FLICKER_TIME);
- del_timer_sync(&sp->id_timer);
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
- writeq(last_gpio_ctrl_val, &bar0->gpio_control);
- last_gpio_ctrl_val = readq(&bar0->gpio_control);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ sp->adapt_ctrl_org = readq(&bar0->gpio_control);
+ return 1; /* cycle on/off once per second */
+
+ case ETHTOOL_ID_ON:
+ s2io_set_led(sp, true);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ s2io_set_led(sp, false);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid))
+ writeq(sp->adapt_ctrl_org, &bar0->gpio_control);
}
return 0;
@@ -6625,25 +6618,6 @@
}
-static u32 s2io_ethtool_get_rx_csum(struct net_device *dev)
-{
- struct s2io_nic *sp = netdev_priv(dev);
-
- return sp->rx_csum;
-}
-
-static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct s2io_nic *sp = netdev_priv(dev);
-
- if (data)
- sp->rx_csum = 1;
- else
- sp->rx_csum = 0;
-
- return 0;
-}
-
static int s2io_get_eeprom_len(struct net_device *dev)
{
return XENA_EEPROM_SPACE;
@@ -6695,61 +6669,27 @@
}
}
-static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
-{
- if (data)
- dev->features |= NETIF_F_IP_CSUM;
- else
- dev->features &= ~NETIF_F_IP_CSUM;
-
- return 0;
-}
-
-static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
-{
- return (dev->features & NETIF_F_TSO) != 0;
-}
-
-static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
-{
- if (data)
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
- else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
- return 0;
-}
-
-static int s2io_ethtool_set_flags(struct net_device *dev, u32 data)
+static int s2io_set_features(struct net_device *dev, u32 features)
{
struct s2io_nic *sp = netdev_priv(dev);
- int rc = 0;
- int changed = 0;
-
- if (ethtool_invalid_flags(dev, data, ETH_FLAG_LRO))
- return -EINVAL;
-
- if (data & ETH_FLAG_LRO) {
- if (!(dev->features & NETIF_F_LRO)) {
- dev->features |= NETIF_F_LRO;
- changed = 1;
- }
- } else if (dev->features & NETIF_F_LRO) {
- dev->features &= ~NETIF_F_LRO;
- changed = 1;
- }
+ u32 changed = (features ^ dev->features) & NETIF_F_LRO;
if (changed && netif_running(dev)) {
+ int rc;
+
s2io_stop_all_tx_queue(sp);
s2io_card_down(sp);
+ dev->features = features;
rc = s2io_card_up(sp);
if (rc)
s2io_reset(sp);
else
s2io_start_all_tx_queue(sp);
+
+ return rc ? rc : 1;
}
- return rc;
+ return 0;
}
static const struct ethtool_ops netdev_ethtool_ops = {
@@ -6765,18 +6705,9 @@
.get_ringparam = s2io_ethtool_gringparam,
.get_pauseparam = s2io_ethtool_getpause_data,
.set_pauseparam = s2io_ethtool_setpause_data,
- .get_rx_csum = s2io_ethtool_get_rx_csum,
- .set_rx_csum = s2io_ethtool_set_rx_csum,
- .set_tx_csum = s2io_ethtool_op_set_tx_csum,
- .set_flags = s2io_ethtool_set_flags,
- .get_flags = ethtool_op_get_flags,
- .set_sg = ethtool_op_set_sg,
- .get_tso = s2io_ethtool_op_get_tso,
- .set_tso = s2io_ethtool_op_set_tso,
- .set_ufo = ethtool_op_set_ufo,
.self_test = s2io_ethtool_test,
.get_strings = s2io_ethtool_get_strings,
- .phys_id = s2io_ethtool_idnic,
+ .set_phys_id = s2io_ethtool_set_led,
.get_ethtool_stats = s2io_get_ethtool_stats,
.get_sset_count = s2io_get_sset_count,
};
@@ -7545,7 +7476,7 @@
if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
((!ring_data->lro) ||
(ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
- (sp->rx_csum)) {
+ (dev->features & NETIF_F_RXCSUM)) {
l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
@@ -7806,6 +7737,7 @@
.ndo_do_ioctl = s2io_ioctl,
.ndo_set_mac_address = s2io_set_mac_addr,
.ndo_change_mtu = s2io_change_mtu,
+ .ndo_set_features = s2io_set_features,
.ndo_vlan_rx_register = s2io_vlan_rx_register,
.ndo_vlan_rx_kill_vid = s2io_vlan_rx_kill_vid,
.ndo_tx_timeout = s2io_tx_watchdog,
@@ -8047,17 +7979,18 @@
/* Driver entry points */
dev->netdev_ops = &s2io_netdev_ops;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->features |= NETIF_F_LRO;
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_RXCSUM | NETIF_F_LRO;
+ dev->features |= dev->hw_features |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ if (sp->device_type & XFRAME_II_DEVICE) {
+ dev->hw_features |= NETIF_F_UFO;
+ if (ufo)
+ dev->features |= NETIF_F_UFO;
+ }
if (sp->high_dma_flag == true)
dev->features |= NETIF_F_HIGHDMA;
- dev->features |= NETIF_F_TSO;
- dev->features |= NETIF_F_TSO6;
- if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) {
- dev->features |= NETIF_F_UFO;
- dev->features |= NETIF_F_HW_CSUM;
- }
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
INIT_WORK(&sp->set_link_task, s2io_set_link);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 2d14497..800b3a4 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -893,9 +893,6 @@
u16 all_multi_pos;
u16 promisc_flg;
- /* Id timer, used to blink NIC to physically identify NIC. */
- struct timer_list id_timer;
-
/* Restart timer, used to restart NIC if the device is stuck and
* a schedule task that will set the correct Link state once the
* NIC's PHY has stabilized after a state change.
@@ -1005,18 +1002,16 @@
#define LF 2
static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
{
- u32 ret;
-
if (order == LF) {
writel((u32) (val), addr);
- ret = readl(addr);
+ (void) readl(addr);
writel((u32) (val >> 32), (addr + 4));
- ret = readl(addr + 4);
+ (void) readl(addr + 4);
} else {
writel((u32) (val >> 32), (addr + 4));
- ret = readl(addr + 4);
+ (void) readl(addr + 4);
writel((u32) (val), addr);
- ret = readl(addr);
+ (void) readl(addr);
}
}
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 76290a8..fa74314 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1173,7 +1173,8 @@
if (phy_ctrl & PhyCtrlAne)
cmd->advertising |= ADVERTISED_Autoneg;
- cmd->speed = (output_status & 0x2) ? SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(cmd,
+ (output_status & 0x2) ? SPEED_100 : SPEED_10);
cmd->duplex = (output_status & 0x4) ? DUPLEX_FULL : DUPLEX_HALF;
cmd->port = PORT_MII;
cmd->phy_address = phy_address;
@@ -1188,10 +1189,11 @@
{
struct sc92031_priv *priv = netdev_priv(dev);
void __iomem *port_base = priv->port_base;
+ u32 speed = ethtool_cmd_speed(cmd);
u32 phy_ctrl;
u32 old_phy_ctrl;
- if (!(cmd->speed == SPEED_10 || cmd->speed == SPEED_100))
+ if (!(speed == SPEED_10 || speed == SPEED_100))
return -EINVAL;
if (!(cmd->duplex == DUPLEX_HALF || cmd->duplex == DUPLEX_FULL))
return -EINVAL;
@@ -1229,7 +1231,7 @@
// FIXME: Whole branch guessed
phy_ctrl = 0;
- if (cmd->speed == SPEED_10)
+ if (speed == SPEED_10)
phy_ctrl |= PhyCtrlSpd10;
else /* cmd->speed == SPEED_100 */
phy_ctrl |= PhyCtrlSpd100;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index a3c2aab..c914729 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -798,11 +798,6 @@
if (!netif_running(efx->net_dev))
return;
- if (efx->port_inhibited) {
- netif_carrier_off(efx->net_dev);
- return;
- }
-
if (link_state->up != netif_carrier_ok(efx->net_dev)) {
efx->n_link_state_changes++;
@@ -838,7 +833,7 @@
}
}
-void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type wanted_fc)
+void efx_link_set_wanted_fc(struct efx_nic *efx, u8 wanted_fc)
{
efx->wanted_fc = wanted_fc;
if (efx->link_advertising) {
@@ -1319,8 +1314,20 @@
static void efx_set_channels(struct efx_nic *efx)
{
+ struct efx_channel *channel;
+ struct efx_tx_queue *tx_queue;
+
efx->tx_channel_offset =
separate_tx_channels ? efx->n_channels - efx->n_tx_channels : 0;
+
+ /* We need to adjust the TX queue numbers if we have separate
+ * RX-only and TX-only channels.
+ */
+ efx_for_each_channel(channel, efx) {
+ efx_for_each_channel_tx_queue(tx_queue, channel)
+ tx_queue->queue -= (efx->tx_channel_offset *
+ EFX_TXQ_TYPES);
+ }
}
static int efx_probe_nic(struct efx_nic *efx)
@@ -1438,7 +1445,7 @@
* restart the transmit interface early so the watchdog timer stops */
efx_start_port(efx);
- if (efx_dev_registered(efx) && !efx->port_inhibited)
+ if (efx_dev_registered(efx) && netif_device_present(efx->net_dev))
netif_tx_wake_all_queues(efx->net_dev);
efx_for_each_channel(channel, efx)
@@ -1876,6 +1883,17 @@
/* Otherwise efx_start_port() will do this */
}
+static int efx_set_features(struct net_device *net_dev, u32 data)
+{
+ struct efx_nic *efx = netdev_priv(net_dev);
+
+ /* If disabling RX n-tuple filtering, clear existing filters */
+ if (net_dev->features & ~data & NETIF_F_NTUPLE)
+ efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
+
+ return 0;
+}
+
static const struct net_device_ops efx_netdev_ops = {
.ndo_open = efx_net_open,
.ndo_stop = efx_net_stop,
@@ -1887,6 +1905,7 @@
.ndo_change_mtu = efx_change_mtu,
.ndo_set_mac_address = efx_set_mac_address,
.ndo_set_multicast_list = efx_set_multicast_list,
+ .ndo_set_features = efx_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = efx_netpoll,
#endif
@@ -2090,6 +2109,7 @@
netif_info(efx, drv, efx->net_dev, "resetting (%s)\n",
RESET_TYPE(method));
+ netif_device_detach(efx->net_dev);
efx_reset_down(efx, method);
rc = efx->type->reset(efx, method);
@@ -2123,6 +2143,7 @@
efx->state = STATE_DISABLED;
} else {
netif_dbg(efx, drv, efx->net_dev, "reset complete\n");
+ netif_device_attach(efx->net_dev);
}
return rc;
}
@@ -2235,7 +2256,7 @@
return false;
}
-static struct efx_phy_operations efx_dummy_phy_operations = {
+static const struct efx_phy_operations efx_dummy_phy_operations = {
.init = efx_port_dummy_op_int,
.reconfigure = efx_port_dummy_op_int,
.poll = efx_port_dummy_op_poll,
@@ -2251,7 +2272,7 @@
/* This zeroes out and then fills in the invariants in a struct
* efx_nic (including all sub-structures).
*/
-static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
+static int efx_init_struct(struct efx_nic *efx, const struct efx_nic_type *type,
struct pci_dev *pci_dev, struct net_device *net_dev)
{
int i;
@@ -2271,7 +2292,6 @@
strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
efx->net_dev = net_dev;
- efx->rx_checksum_enabled = true;
spin_lock_init(&efx->stats_lock);
mutex_init(&efx->mac_lock);
efx->mac_op = type->default_mac_ops;
@@ -2442,7 +2462,7 @@
static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *entry)
{
- struct efx_nic_type *type = (struct efx_nic_type *) entry->driver_data;
+ const struct efx_nic_type *type = (const struct efx_nic_type *) entry->driver_data;
struct net_device *net_dev;
struct efx_nic *efx;
int i, rc;
@@ -2454,12 +2474,15 @@
return -ENOMEM;
net_dev->features |= (type->offload_features | NETIF_F_SG |
NETIF_F_HIGHDMA | NETIF_F_TSO |
- NETIF_F_GRO);
+ NETIF_F_RXCSUM);
if (type->offload_features & NETIF_F_V6_CSUM)
net_dev->features |= NETIF_F_TSO6;
/* Mask for features that also apply to VLAN devices */
net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
- NETIF_F_HIGHDMA | NETIF_F_TSO);
+ NETIF_F_HIGHDMA | NETIF_F_ALL_TSO |
+ NETIF_F_RXCSUM);
+ /* All offloads can be toggled */
+ net_dev->hw_features = net_dev->features & ~NETIF_F_HIGHDMA;
efx = netdev_priv(net_dev);
pci_set_drvdata(pci_dev, efx);
SET_NETDEV_DEV(net_dev, &pci_dev->dev);
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index 3d83a1f..b0d1209 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -142,6 +142,6 @@
extern void efx_link_status_changed(struct efx_nic *efx);
extern void efx_link_set_advertising(struct efx_nic *efx, u32);
-extern void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type);
+extern void efx_link_set_wanted_fc(struct efx_nic *efx, u8);
#endif /* EFX_EFX_H */
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 807178e..d229027 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -178,19 +178,27 @@
*/
/* Identify device by flashing LEDs */
-static int efx_ethtool_phys_id(struct net_device *net_dev, u32 count)
+static int efx_ethtool_phys_id(struct net_device *net_dev,
+ enum ethtool_phys_id_state state)
{
struct efx_nic *efx = netdev_priv(net_dev);
+ enum efx_led_mode mode = EFX_LED_DEFAULT;
- do {
- efx->type->set_id_led(efx, EFX_LED_ON);
- schedule_timeout_interruptible(HZ / 2);
+ switch (state) {
+ case ETHTOOL_ID_ON:
+ mode = EFX_LED_ON;
+ break;
+ case ETHTOOL_ID_OFF:
+ mode = EFX_LED_OFF;
+ break;
+ case ETHTOOL_ID_INACTIVE:
+ mode = EFX_LED_DEFAULT;
+ break;
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
+ }
- efx->type->set_id_led(efx, EFX_LED_OFF);
- schedule_timeout_interruptible(HZ / 2);
- } while (!signal_pending(current) && --count != 0);
-
- efx->type->set_id_led(efx, EFX_LED_DEFAULT);
+ efx->type->set_id_led(efx, mode);
return 0;
}
@@ -211,7 +219,7 @@
ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
if (LOOPBACK_INTERNAL(efx)) {
- ecmd->speed = link_state->speed;
+ ethtool_cmd_speed_set(ecmd, link_state->speed);
ecmd->duplex = link_state->fd ? DUPLEX_FULL : DUPLEX_HALF;
}
@@ -226,7 +234,8 @@
int rc;
/* GMAC does not support 1000Mbps HD */
- if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
+ if ((ethtool_cmd_speed(ecmd) == SPEED_1000) &&
+ (ecmd->duplex != DUPLEX_FULL)) {
netif_dbg(efx, drv, efx->net_dev,
"rejecting unsupported 1000Mbps HD setting\n");
return -EINVAL;
@@ -518,72 +527,6 @@
}
}
-static int efx_ethtool_set_tso(struct net_device *net_dev, u32 enable)
-{
- struct efx_nic *efx __attribute__ ((unused)) = netdev_priv(net_dev);
- u32 features;
-
- features = NETIF_F_TSO;
- if (efx->type->offload_features & NETIF_F_V6_CSUM)
- features |= NETIF_F_TSO6;
-
- if (enable)
- net_dev->features |= features;
- else
- net_dev->features &= ~features;
-
- return 0;
-}
-
-static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable)
-{
- struct efx_nic *efx = netdev_priv(net_dev);
- u32 features = efx->type->offload_features & NETIF_F_ALL_CSUM;
-
- if (enable)
- net_dev->features |= features;
- else
- net_dev->features &= ~features;
-
- return 0;
-}
-
-static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable)
-{
- struct efx_nic *efx = netdev_priv(net_dev);
-
- /* No way to stop the hardware doing the checks; we just
- * ignore the result.
- */
- efx->rx_checksum_enabled = !!enable;
-
- return 0;
-}
-
-static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev)
-{
- struct efx_nic *efx = netdev_priv(net_dev);
-
- return efx->rx_checksum_enabled;
-}
-
-static int efx_ethtool_set_flags(struct net_device *net_dev, u32 data)
-{
- struct efx_nic *efx = netdev_priv(net_dev);
- u32 supported = (efx->type->offload_features &
- (ETH_FLAG_RXHASH | ETH_FLAG_NTUPLE));
- int rc;
-
- rc = ethtool_op_set_flags(net_dev, data, supported);
- if (rc)
- return rc;
-
- if (!(data & ETH_FLAG_NTUPLE))
- efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
-
- return 0;
-}
-
static void efx_ethtool_self_test(struct net_device *net_dev,
struct ethtool_test *test, u64 *data)
{
@@ -755,7 +698,7 @@
struct ethtool_pauseparam *pause)
{
struct efx_nic *efx = netdev_priv(net_dev);
- enum efx_fc_type wanted_fc, old_fc;
+ u8 wanted_fc, old_fc;
u32 old_adv;
bool reset;
int rc = 0;
@@ -1012,8 +955,9 @@
if (ntuple->fs.action == ETHTOOL_RXNTUPLE_ACTION_CLEAR)
return efx_filter_remove_filter(efx, &filter);
- else
- return efx_filter_insert_filter(efx, &filter, true);
+
+ rc = efx_filter_insert_filter(efx, &filter, true);
+ return rc < 0 ? rc : 0;
}
static int efx_ethtool_get_rxfh_indir(struct net_device *net_dev,
@@ -1070,22 +1014,10 @@
.set_ringparam = efx_ethtool_set_ringparam,
.get_pauseparam = efx_ethtool_get_pauseparam,
.set_pauseparam = efx_ethtool_set_pauseparam,
- .get_rx_csum = efx_ethtool_get_rx_csum,
- .set_rx_csum = efx_ethtool_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- /* Need to enable/disable IPv6 too */
- .set_tx_csum = efx_ethtool_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- /* Need to enable/disable TSO-IPv6 too */
- .set_tso = efx_ethtool_set_tso,
- .get_flags = ethtool_op_get_flags,
- .set_flags = efx_ethtool_set_flags,
.get_sset_count = efx_ethtool_get_sset_count,
.self_test = efx_ethtool_self_test,
.get_strings = efx_ethtool_get_strings,
- .phys_id = efx_ethtool_phys_id,
+ .set_phys_id = efx_ethtool_phys_id,
.get_ethtool_stats = efx_ethtool_get_stats,
.get_wol = efx_ethtool_get_wol,
.set_wol = efx_ethtool_set_wol,
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index d96b237..60176e8 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1703,7 +1703,7 @@
**************************************************************************
*/
-struct efx_nic_type falcon_a1_nic_type = {
+const struct efx_nic_type falcon_a1_nic_type = {
.probe = falcon_probe_nic,
.remove = falcon_remove_nic,
.init = falcon_init_nic,
@@ -1744,7 +1744,7 @@
.reset_world_flags = ETH_RESET_IRQ,
};
-struct efx_nic_type falcon_b0_nic_type = {
+const struct efx_nic_type falcon_b0_nic_type = {
.probe = falcon_probe_nic,
.remove = falcon_remove_nic,
.init = falcon_init_nic,
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 2c9ee5d..9516452 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -362,7 +362,7 @@
falcon_ack_status_intr(efx);
}
-struct efx_mac_operations falcon_xmac_operations = {
+const struct efx_mac_operations falcon_xmac_operations = {
.reconfigure = falcon_reconfigure_xmac,
.update_stats = falcon_update_stats_xmac,
.check_fault = falcon_xmac_check_fault,
diff --git a/drivers/net/sfc/mac.h b/drivers/net/sfc/mac.h
index 6886cdf..d6a255d 100644
--- a/drivers/net/sfc/mac.h
+++ b/drivers/net/sfc/mac.h
@@ -13,8 +13,8 @@
#include "net_driver.h"
-extern struct efx_mac_operations falcon_xmac_operations;
-extern struct efx_mac_operations efx_mcdi_mac_operations;
+extern const struct efx_mac_operations falcon_xmac_operations;
+extern const struct efx_mac_operations efx_mcdi_mac_operations;
extern int efx_mcdi_mac_stats(struct efx_nic *efx, dma_addr_t dma_addr,
u32 dma_len, int enable, int clear);
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index d984790..3dd45ed 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -50,6 +50,20 @@
return &nic_data->mcdi;
}
+static inline void
+efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg)
+{
+ struct siena_nic_data *nic_data = efx->nic_data;
+ value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg);
+}
+
+static inline void
+efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg)
+{
+ struct siena_nic_data *nic_data = efx->nic_data;
+ __raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg);
+}
+
void efx_mcdi_init(struct efx_nic *efx)
{
struct efx_mcdi_iface *mcdi;
@@ -70,8 +84,8 @@
const u8 *inbuf, size_t inlen)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
- unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx);
+ unsigned pdu = MCDI_PDU(efx);
+ unsigned doorbell = MCDI_DOORBELL(efx);
unsigned int i;
efx_dword_t hdr;
u32 xflags, seqno;
@@ -92,30 +106,28 @@
MCDI_HEADER_SEQ, seqno,
MCDI_HEADER_XFLAGS, xflags);
- efx_writed(efx, &hdr, pdu);
+ efx_mcdi_writed(efx, &hdr, pdu);
- for (i = 0; i < inlen; i += 4) {
- _efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i);
- /* use wmb() within loop to inhibit write combining */
- wmb();
- }
+ for (i = 0; i < inlen; i += 4)
+ efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i),
+ pdu + 4 + i);
/* ring the doorbell with a distinctive value */
- _efx_writed(efx, (__force __le32) 0x45789abc, doorbell);
- wmb();
+ EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc);
+ efx_mcdi_writed(efx, &hdr, doorbell);
}
static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+ unsigned int pdu = MCDI_PDU(efx);
int i;
BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
BUG_ON(outlen & 3 || outlen >= 0x100);
for (i = 0; i < outlen; i += 4)
- *((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i);
+ efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i);
}
static int efx_mcdi_poll(struct efx_nic *efx)
@@ -123,7 +135,7 @@
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
unsigned int time, finish;
unsigned int respseq, respcmd, error;
- unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+ unsigned int pdu = MCDI_PDU(efx);
unsigned int rc, spins;
efx_dword_t reg;
@@ -149,8 +161,7 @@
time = get_seconds();
- rmb();
- efx_readd(efx, ®, pdu);
+ efx_mcdi_readd(efx, ®, pdu);
/* All 1's indicates that shared memory is in reset (and is
* not a valid header). Wait for it to come out reset before
@@ -177,7 +188,7 @@
respseq, mcdi->seqno);
rc = EIO;
} else if (error) {
- efx_readd(efx, ®, pdu + 4);
+ efx_mcdi_readd(efx, ®, pdu + 4);
switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) {
#define TRANSLATE_ERROR(name) \
case MC_CMD_ERR_ ## name: \
@@ -211,21 +222,21 @@
/* Test and clear MC-rebooted flag for this port/function */
int efx_mcdi_poll_reboot(struct efx_nic *efx)
{
- unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx);
+ unsigned int addr = MCDI_REBOOT_FLAG(efx);
efx_dword_t reg;
uint32_t value;
if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
return false;
- efx_readd(efx, ®, addr);
+ efx_mcdi_readd(efx, ®, addr);
value = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
if (value == 0)
return 0;
EFX_ZERO_DWORD(reg);
- efx_writed(efx, ®, addr);
+ efx_mcdi_writed(efx, ®, addr);
if (value == MC_STATUS_DWORD_ASSERT)
return -EINTR;
diff --git a/drivers/net/sfc/mcdi_mac.c b/drivers/net/sfc/mcdi_mac.c
index 33f7294..50c2077 100644
--- a/drivers/net/sfc/mcdi_mac.c
+++ b/drivers/net/sfc/mcdi_mac.c
@@ -138,7 +138,7 @@
}
-struct efx_mac_operations efx_mcdi_mac_operations = {
+const struct efx_mac_operations efx_mcdi_mac_operations = {
.reconfigure = efx_mcdi_mac_reconfigure,
.update_stats = efx_port_dummy_op_void,
.check_fault = efx_mcdi_mac_check_fault,
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index 7e3c65b..6c63ab0 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -513,7 +513,7 @@
ecmd->supported =
mcdi_to_ethtool_cap(phy_cfg->media, phy_cfg->supported_cap);
ecmd->advertising = efx->link_advertising;
- ecmd->speed = efx->link_state.speed;
+ ethtool_cmd_speed_set(ecmd, efx->link_state.speed);
ecmd->duplex = efx->link_state.fd;
ecmd->port = mcdi_to_ethtool_media(phy_cfg->media);
ecmd->phy_address = phy_cfg->port;
@@ -545,7 +545,7 @@
caps = (ethtool_to_mcdi_cap(ecmd->advertising) |
1 << MC_CMD_PHY_CAP_AN_LBN);
} else if (ecmd->duplex) {
- switch (ecmd->speed) {
+ switch (ethtool_cmd_speed(ecmd)) {
case 10: caps = 1 << MC_CMD_PHY_CAP_10FDX_LBN; break;
case 100: caps = 1 << MC_CMD_PHY_CAP_100FDX_LBN; break;
case 1000: caps = 1 << MC_CMD_PHY_CAP_1000FDX_LBN; break;
@@ -553,7 +553,7 @@
default: return -EINVAL;
}
} else {
- switch (ecmd->speed) {
+ switch (ethtool_cmd_speed(ecmd)) {
case 10: caps = 1 << MC_CMD_PHY_CAP_10HDX_LBN; break;
case 100: caps = 1 << MC_CMD_PHY_CAP_100HDX_LBN; break;
case 1000: caps = 1 << MC_CMD_PHY_CAP_1000HDX_LBN; break;
@@ -739,7 +739,7 @@
return NULL;
}
-struct efx_phy_operations efx_mcdi_phy_ops = {
+const struct efx_phy_operations efx_mcdi_phy_ops = {
.probe = efx_mcdi_phy_probe,
.init = efx_port_dummy_op_int,
.reconfigure = efx_mcdi_phy_reconfigure,
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 19e68c2..7ab385c 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -232,12 +232,12 @@
*/
int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
{
- struct ethtool_cmd prev;
+ struct ethtool_cmd prev = { .cmd = ETHTOOL_GSET };
efx->phy_op->get_settings(efx, &prev);
if (ecmd->advertising == prev.advertising &&
- ecmd->speed == prev.speed &&
+ ethtool_cmd_speed(ecmd) == ethtool_cmd_speed(&prev) &&
ecmd->duplex == prev.duplex &&
ecmd->port == prev.port &&
ecmd->autoneg == prev.autoneg)
@@ -284,7 +284,7 @@
efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
}
-enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
+u8 efx_mdio_get_pause(struct efx_nic *efx)
{
BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index df07039..a97dbbd 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -92,7 +92,7 @@
/* Get pause parameters from AN if available (otherwise return
* requested pause parameters)
*/
-enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx);
+u8 efx_mdio_get_pause(struct efx_nic *efx);
/* Wait for specified MMDs to exit reset within a timeout */
extern int efx_mdio_wait_reset_mmds(struct efx_nic *efx,
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 191a311..e8d5f03 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -449,11 +449,9 @@
struct efx_nic;
/* Pseudo bit-mask flow control field */
-enum efx_fc_type {
- EFX_FC_RX = FLOW_CTRL_RX,
- EFX_FC_TX = FLOW_CTRL_TX,
- EFX_FC_AUTO = 4,
-};
+#define EFX_FC_RX FLOW_CTRL_RX
+#define EFX_FC_TX FLOW_CTRL_TX
+#define EFX_FC_AUTO 4
/**
* struct efx_link_state - Current state of the link
@@ -465,7 +463,7 @@
struct efx_link_state {
bool up;
bool fd;
- enum efx_fc_type fc;
+ u8 fc;
unsigned int speed;
};
@@ -670,16 +668,14 @@
* @mtd_list: List of MTDs attached to the NIC
* @nic_data: Hardware dependent state
* @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
- * @port_inhibited, efx_monitor() and efx_reconfigure_port()
+ * efx_monitor() and efx_reconfigure_port()
* @port_enabled: Port enabled indicator.
* Serialises efx_stop_all(), efx_start_all(), efx_monitor() and
* efx_mac_work() with kernel interfaces. Safe to read under any
* one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
* be held to modify it.
- * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
* @port_initialized: Port initialized?
* @net_dev: Operating system network device. Consider holding the rtnl lock
- * @rx_checksum_enabled: RX checksumming enabled
* @stats_buffer: DMA buffer for statistics
* @mac_op: MAC interface
* @phy_type: PHY type
@@ -765,18 +761,16 @@
struct mutex mac_lock;
struct work_struct mac_work;
bool port_enabled;
- bool port_inhibited;
bool port_initialized;
struct net_device *net_dev;
- bool rx_checksum_enabled;
struct efx_buffer stats_buffer;
- struct efx_mac_operations *mac_op;
+ const struct efx_mac_operations *mac_op;
unsigned int phy_type;
- struct efx_phy_operations *phy_op;
+ const struct efx_phy_operations *phy_op;
void *phy_data;
struct mdio_if_info mdio;
unsigned int mdio_bus;
@@ -788,7 +782,7 @@
bool promiscuous;
union efx_multicast_hash multicast_hash;
- enum efx_fc_type wanted_fc;
+ u8 wanted_fc;
atomic_t rx_reset;
enum efx_loopback_mode loopback_mode;
@@ -897,7 +891,7 @@
void (*resume_wol)(struct efx_nic *efx);
int (*test_registers)(struct efx_nic *efx);
int (*test_nvram)(struct efx_nic *efx);
- struct efx_mac_operations *default_mac_ops;
+ const struct efx_mac_operations *default_mac_ops;
int revision;
unsigned int mem_map_size;
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index 10f1cb7..f2a2b94 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -852,7 +852,6 @@
unsigned expected_ptr;
bool rx_ev_pkt_ok, discard = false, checksummed;
struct efx_rx_queue *rx_queue;
- struct efx_nic *efx = channel->efx;
/* Basic packet information */
rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_BYTE_CNT);
@@ -875,9 +874,8 @@
* UDP/IP, then we can rely on the hardware checksum.
*/
checksummed =
- likely(efx->rx_checksum_enabled) &&
- (rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
- rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP);
+ rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
+ rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP;
} else {
efx_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok, &discard);
checksummed = false;
@@ -1937,6 +1935,13 @@
size = min_t(size_t, table->step, 16);
+ if (table->offset >= efx->type->mem_map_size) {
+ /* No longer mapped; return dummy data */
+ memcpy(buf, "\xde\xc0\xad\xde", 4);
+ buf += table->rows * size;
+ continue;
+ }
+
for (i = 0; i < table->rows; i++) {
switch (table->step) {
case 4: /* 32-bit register or SRAM */
diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h
index a42db6e..4bd1f28 100644
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/sfc/nic.h
@@ -143,16 +143,18 @@
/**
* struct siena_nic_data - Siena NIC state
* @mcdi: Management-Controller-to-Driver Interface
+ * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable.
* @wol_filter_id: Wake-on-LAN packet filter id
*/
struct siena_nic_data {
struct efx_mcdi_iface mcdi;
+ void __iomem *mcdi_smem;
int wol_filter_id;
};
-extern struct efx_nic_type falcon_a1_nic_type;
-extern struct efx_nic_type falcon_b0_nic_type;
-extern struct efx_nic_type siena_a0_nic_type;
+extern const struct efx_nic_type falcon_a1_nic_type;
+extern const struct efx_nic_type falcon_b0_nic_type;
+extern const struct efx_nic_type siena_a0_nic_type;
/**************************************************************************
*
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index b3b7947..11d148c 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -13,14 +13,14 @@
/****************************************************************************
* 10Xpress (SFX7101) PHY
*/
-extern struct efx_phy_operations falcon_sfx7101_phy_ops;
+extern const struct efx_phy_operations falcon_sfx7101_phy_ops;
extern void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode);
/****************************************************************************
* AMCC/Quake QT202x PHYs
*/
-extern struct efx_phy_operations falcon_qt202x_phy_ops;
+extern const struct efx_phy_operations falcon_qt202x_phy_ops;
/* These PHYs provide various H/W control states for LEDs */
#define QUAKE_LED_LINK_INVAL (0)
@@ -39,7 +39,7 @@
/****************************************************************************
* Transwitch CX4 retimer
*/
-extern struct efx_phy_operations falcon_txc_phy_ops;
+extern const struct efx_phy_operations falcon_txc_phy_ops;
#define TXC_GPIO_DIR_INPUT 0
#define TXC_GPIO_DIR_OUTPUT 1
@@ -50,7 +50,7 @@
/****************************************************************************
* Siena managed PHYs
*/
-extern struct efx_phy_operations efx_mcdi_phy_ops;
+extern const struct efx_phy_operations efx_mcdi_phy_ops;
extern int efx_mcdi_mdio_read(struct efx_nic *efx, unsigned int bus,
unsigned int prtad, unsigned int devad,
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index 55f9092..7ad97e3 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -449,7 +449,7 @@
efx->phy_data = NULL;
}
-struct efx_phy_operations falcon_qt202x_phy_ops = {
+const struct efx_phy_operations falcon_qt202x_phy_ops = {
.probe = qt202x_phy_probe,
.init = qt202x_phy_init,
.reconfigure = qt202x_phy_reconfigure,
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index c0fdb59..b7dc891 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -605,6 +605,9 @@
skb_record_rx_queue(skb, channel->channel);
}
+ if (unlikely(!(efx->net_dev->features & NETIF_F_RXCSUM)))
+ checksummed = false;
+
if (likely(checksummed || rx_buf->is_page)) {
efx_rx_packet_gro(channel, rx_buf, eh, checksummed);
return;
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 50ad3bc..822f6c2 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -695,12 +695,12 @@
/* Offline (i.e. disruptive) testing
* This checks MAC and PHY loopback on the specified port. */
- /* force the carrier state off so the kernel doesn't transmit during
- * the loopback test, and the watchdog timeout doesn't fire. Also put
- * falcon into loopback for the register test.
+ /* Detach the device so the kernel doesn't transmit during the
+ * loopback test and the watchdog timeout doesn't fire.
*/
+ netif_device_detach(efx->net_dev);
+
mutex_lock(&efx->mac_lock);
- efx->port_inhibited = true;
if (efx->loopback_modes) {
/* We need the 312 clock from the PHY to test the XMAC
* registers, so move into XGMII loopback if available */
@@ -750,12 +750,11 @@
/* restore the PHY to the previous state */
mutex_lock(&efx->mac_lock);
efx->phy_mode = phy_mode;
- efx->port_inhibited = false;
efx->loopback_mode = loopback_mode;
__efx_reconfigure_port(efx);
mutex_unlock(&efx->mac_lock);
- netif_tx_wake_all_queues(efx->net_dev);
+ netif_device_attach(efx->net_dev);
return rc_test;
}
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index e4dd898..fb4721f 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -220,12 +220,26 @@
efx_reado(efx, ®, FR_AZ_CS_DEBUG);
efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
+ /* Initialise MCDI */
+ nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys +
+ FR_CZ_MC_TREG_SMEM,
+ FR_CZ_MC_TREG_SMEM_STEP *
+ FR_CZ_MC_TREG_SMEM_ROWS);
+ if (!nic_data->mcdi_smem) {
+ netif_err(efx, probe, efx->net_dev,
+ "could not map MCDI at %llx+%x\n",
+ (unsigned long long)efx->membase_phys +
+ FR_CZ_MC_TREG_SMEM,
+ FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS);
+ rc = -ENOMEM;
+ goto fail1;
+ }
efx_mcdi_init(efx);
/* Recover from a failed assertion before probing */
rc = efx_mcdi_handle_assertion(efx);
if (rc)
- goto fail1;
+ goto fail2;
/* Let the BMC know that the driver is now in charge of link and
* filter settings. We must do this before we reset the NIC */
@@ -280,6 +294,7 @@
fail3:
efx_mcdi_drv_attach(efx, false, NULL);
fail2:
+ iounmap(nic_data->mcdi_smem);
fail1:
kfree(efx->nic_data);
return rc;
@@ -359,6 +374,8 @@
static void siena_remove_nic(struct efx_nic *efx)
{
+ struct siena_nic_data *nic_data = efx->nic_data;
+
efx_nic_free_buffer(efx, &efx->irq_status);
siena_reset_hw(efx, RESET_TYPE_ALL);
@@ -368,7 +385,8 @@
efx_mcdi_drv_attach(efx, false, NULL);
/* Tear down the private nic state */
- kfree(efx->nic_data);
+ iounmap(nic_data->mcdi_smem);
+ kfree(nic_data);
efx->nic_data = NULL;
}
@@ -581,7 +599,7 @@
**************************************************************************
*/
-struct efx_nic_type siena_a0_nic_type = {
+const struct efx_nic_type siena_a0_nic_type = {
.probe = siena_probe_nic,
.remove = siena_remove_nic,
.init = siena_init_nic,
@@ -606,8 +624,7 @@
.default_mac_ops = &efx_mcdi_mac_operations,
.revision = EFX_REV_SIENA_A0,
- .mem_map_size = (FR_CZ_MC_TREG_SMEM +
- FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS),
+ .mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */
.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index efdceb3..7b0fd89 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -460,7 +460,7 @@
/* In loopback, the PHY automatically brings up the correct interface,
* but doesn't advertise the correct speed. So override it */
if (LOOPBACK_EXTERNAL(efx))
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
}
static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
@@ -478,7 +478,7 @@
advertising & ADVERTISED_10000baseT_Full);
}
-struct efx_phy_operations falcon_sfx7101_phy_ops = {
+const struct efx_phy_operations falcon_sfx7101_phy_ops = {
.probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index d2c85df..84eb99e 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -205,7 +205,9 @@
goto unwind;
}
smp_mb();
- netif_tx_start_queue(tx_queue->core_txq);
+ if (likely(!efx->loopback_selftest))
+ netif_tx_start_queue(
+ tx_queue->core_txq);
}
insert_ptr = tx_queue->insert_count & tx_queue->ptr_mask;
@@ -338,8 +340,7 @@
struct efx_tx_queue *tx_queue;
unsigned index, type;
- if (unlikely(efx->port_inhibited))
- return NETDEV_TX_BUSY;
+ EFX_WARN_ON_PARANOID(!netif_device_present(net_dev));
index = skb_get_queue_mapping(skb);
type = skb->ip_summed == CHECKSUM_PARTIAL ? EFX_TXQ_TYPE_OFFLOAD : 0;
@@ -436,7 +437,7 @@
smp_mb();
if (unlikely(netif_tx_queue_stopped(tx_queue->core_txq)) &&
likely(efx->port_enabled) &&
- likely(!efx->port_inhibited)) {
+ likely(netif_device_present(efx->net_dev))) {
fill_level = tx_queue->insert_count - tx_queue->read_count;
if (fill_level < EFX_TXQ_THRESHOLD(efx)) {
EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
diff --git a/drivers/net/sfc/txc43128_phy.c b/drivers/net/sfc/txc43128_phy.c
index d9886ad..7c21b33 100644
--- a/drivers/net/sfc/txc43128_phy.c
+++ b/drivers/net/sfc/txc43128_phy.c
@@ -545,7 +545,7 @@
mdio45_ethtool_gset(&efx->mdio, ecmd);
}
-struct efx_phy_operations falcon_txc_phy_ops = {
+const struct efx_phy_operations falcon_txc_phy_ops = {
.probe = txc43128_phy_probe,
.init = txc43128_phy_init,
.reconfigure = txc43128_phy_reconfigure,
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 35b28f4..52a48cb 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -303,7 +303,7 @@
ecmd->advertising = skge->advertising;
ecmd->autoneg = skge->autoneg;
- ecmd->speed = skge->speed;
+ ethtool_cmd_speed_set(ecmd, skge->speed);
ecmd->duplex = skge->duplex;
return 0;
}
@@ -321,8 +321,9 @@
skge->speed = -1;
} else {
u32 setting;
+ u32 speed = ethtool_cmd_speed(ecmd);
- switch (ecmd->speed) {
+ switch (speed) {
case SPEED_1000:
if (ecmd->duplex == DUPLEX_FULL)
setting = SUPPORTED_1000baseT_Full;
@@ -355,7 +356,7 @@
if ((setting & supported) == 0)
return -EINVAL;
- skge->speed = ecmd->speed;
+ skge->speed = speed;
skge->duplex = ecmd->duplex;
}
@@ -537,46 +538,6 @@
return 0;
}
-static int skge_set_sg(struct net_device *dev, u32 data)
-{
- struct skge_port *skge = netdev_priv(dev);
- struct skge_hw *hw = skge->hw;
-
- if (hw->chip_id == CHIP_ID_GENESIS && data)
- return -EOPNOTSUPP;
- return ethtool_op_set_sg(dev, data);
-}
-
-static int skge_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct skge_port *skge = netdev_priv(dev);
- struct skge_hw *hw = skge->hw;
-
- if (hw->chip_id == CHIP_ID_GENESIS && data)
- return -EOPNOTSUPP;
-
- return ethtool_op_set_tx_csum(dev, data);
-}
-
-static u32 skge_get_rx_csum(struct net_device *dev)
-{
- struct skge_port *skge = netdev_priv(dev);
-
- return skge->rx_csum;
-}
-
-/* Only Yukon supports checksum offload. */
-static int skge_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct skge_port *skge = netdev_priv(dev);
-
- if (skge->hw->chip_id == CHIP_ID_GENESIS && data)
- return -EOPNOTSUPP;
-
- skge->rx_csum = data;
- return 0;
-}
-
static void skge_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *ecmd)
{
@@ -786,29 +747,28 @@
}
/* blink LED's for finding board */
-static int skge_phys_id(struct net_device *dev, u32 data)
+static int skge_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct skge_port *skge = netdev_priv(dev);
- unsigned long ms;
- enum led_mode mode = LED_MODE_TST;
- if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
- ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
- else
- ms = data * 1000;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 2; /* cycle on/off twice per second */
- while (ms > 0) {
- skge_led(skge, mode);
- mode ^= LED_MODE_TST;
+ case ETHTOOL_ID_ON:
+ skge_led(skge, LED_MODE_TST);
+ break;
- if (msleep_interruptible(BLINK_MS))
- break;
- ms -= BLINK_MS;
+ case ETHTOOL_ID_OFF:
+ skge_led(skge, LED_MODE_OFF);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ /* back to regular LED state */
+ skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
}
- /* back to regular LED state */
- skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
-
return 0;
}
@@ -925,12 +885,8 @@
.set_pauseparam = skge_set_pauseparam,
.get_coalesce = skge_get_coalesce,
.set_coalesce = skge_set_coalesce,
- .set_sg = skge_set_sg,
- .set_tx_csum = skge_set_tx_csum,
- .get_rx_csum = skge_get_rx_csum,
- .set_rx_csum = skge_set_rx_csum,
.get_strings = skge_get_strings,
- .phys_id = skge_phys_id,
+ .set_phys_id = skge_set_phys_id,
.get_sset_count = skge_get_sset_count,
.get_ethtool_stats = skge_get_ethtool_stats,
};
@@ -3085,7 +3041,8 @@
}
skb_put(skb, len);
- if (skge->rx_csum) {
+
+ if (dev->features & NETIF_F_RXCSUM) {
skb->csum = csum;
skb->ip_summed = CHECKSUM_COMPLETE;
}
@@ -3847,10 +3804,10 @@
setup_timer(&skge->link_timer, xm_link_timer, (unsigned long) skge);
if (hw->chip_id != CHIP_ID_GENESIS) {
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- skge->rx_csum = 1;
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_RXCSUM;
+ dev->features |= dev->hw_features;
}
- dev->features |= NETIF_F_GRO;
/* read the mac address */
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 51c0214..598bf7a 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -2460,7 +2460,6 @@
struct timer_list link_timer;
enum pause_control flow_control;
enum pause_status flow_status;
- u8 rx_csum;
u8 blink_on;
u8 wol;
u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ff8d262..3ee41da 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1198,12 +1198,12 @@
sky2_write32(sky2->hw,
Q_ADDR(rxqaddr[sky2->port], Q_CSR),
- (sky2->flags & SKY2_FLAG_RX_CHECKSUM)
+ (sky2->netdev->features & NETIF_F_RXCSUM)
? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
/* Enable/disable receive hash calculation (RSS) */
-static void rx_set_rss(struct net_device *dev)
+static void rx_set_rss(struct net_device *dev, u32 features)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
@@ -1216,7 +1216,7 @@
}
/* Program RSS initial values */
- if (dev->features & NETIF_F_RXHASH) {
+ if (features & NETIF_F_RXHASH) {
u32 key[nkeys];
get_random_bytes(key, nkeys * sizeof(u32));
@@ -1322,32 +1322,32 @@
return err;
}
-#define NETIF_F_ALL_VLAN (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX)
+#define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
-static void sky2_vlan_mode(struct net_device *dev)
+static void sky2_vlan_mode(struct net_device *dev, u32 features)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
u16 port = sky2->port;
- if (dev->features & NETIF_F_HW_VLAN_RX)
+ if (features & NETIF_F_HW_VLAN_RX)
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
else
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_OFF);
- dev->vlan_features = dev->features &~ NETIF_F_ALL_VLAN;
- if (dev->features & NETIF_F_HW_VLAN_TX)
+ if (features & NETIF_F_HW_VLAN_TX) {
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_ON);
- else {
+
+ dev->vlan_features |= SKY2_VLAN_OFFLOADS;
+ } else {
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
/* Can't do transmit offload of vlan without hw vlan */
- dev->vlan_features &= ~(NETIF_F_TSO | NETIF_F_SG
- | NETIF_F_ALL_CSUM);
+ dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
}
}
@@ -1463,7 +1463,7 @@
rx_set_checksum(sky2);
if (!(hw->flags & SKY2_HW_RSS_BROKEN))
- rx_set_rss(sky2->netdev);
+ rx_set_rss(sky2->netdev, sky2->netdev->features);
/* submit Rx ring */
for (i = 0; i < sky2->rx_pending; i++) {
@@ -1626,7 +1626,8 @@
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
sky2->tx_ring_size - 1);
- sky2_vlan_mode(sky2->netdev);
+ sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
+ netdev_update_features(sky2->netdev);
sky2_rx_start(sky2);
}
@@ -2261,12 +2262,9 @@
hw->chip_id == CHIP_ID_YUKON_FE_P))
return -EINVAL;
- /* TSO, etc on Yukon Ultra and MTU > 1500 not supported */
- if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
- dev->features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
-
if (!netif_running(dev)) {
dev->mtu = new_mtu;
+ netdev_update_features(dev);
return 0;
}
@@ -2288,6 +2286,7 @@
sky2_rx_clean(sky2);
dev->mtu = new_mtu;
+ netdev_update_features(dev);
mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
@@ -2535,8 +2534,11 @@
"%s: receive checksum problem (status = %#x)\n",
sky2->netdev->name, status);
- /* Disable checksum offload */
- sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
+ /* Disable checksum offload
+ * It will be reenabled on next ndo_set_features, but if it's
+ * really broken, will get disabled again
+ */
+ sky2->netdev->features &= ~NETIF_F_RXCSUM;
sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
BMU_DIS_RX_CHKSUM);
}
@@ -2591,7 +2593,7 @@
/* This chip reports checksum status differently */
if (hw->flags & SKY2_HW_NEW_LE) {
- if ((sky2->flags & SKY2_FLAG_RX_CHECKSUM) &&
+ if ((dev->features & NETIF_F_RXCSUM) &&
(le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
(le->css & CSS_TCPUDPCSOK))
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2616,7 +2618,7 @@
sky2->rx_tag = length;
/* fall through */
case OP_RXCHKS:
- if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
+ if (likely(dev->features & NETIF_F_RXCSUM))
sky2_rx_checksum(sky2, status);
break;
@@ -3411,10 +3413,10 @@
ecmd->phy_address = PHY_ADDR_MARV;
if (sky2_is_copper(hw)) {
ecmd->port = PORT_TP;
- ecmd->speed = sky2->speed;
+ ethtool_cmd_speed_set(ecmd, sky2->speed);
ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
} else {
- ecmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
ecmd->port = PORT_FIBRE;
ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
}
@@ -3450,8 +3452,9 @@
sky2->speed = -1;
} else {
u32 setting;
+ u32 speed = ethtool_cmd_speed(ecmd);
- switch (ecmd->speed) {
+ switch (speed) {
case SPEED_1000:
if (ecmd->duplex == DUPLEX_FULL)
setting = SUPPORTED_1000baseT_Full;
@@ -3484,7 +3487,7 @@
if ((setting & supported) == 0)
return -EINVAL;
- sky2->speed = ecmd->speed;
+ sky2->speed = speed;
sky2->duplex = ecmd->duplex;
sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
}
@@ -3552,28 +3555,6 @@
{ "tx_fifo_underrun", GM_TXE_FIFO_UR },
};
-static u32 sky2_get_rx_csum(struct net_device *dev)
-{
- struct sky2_port *sky2 = netdev_priv(dev);
-
- return !!(sky2->flags & SKY2_FLAG_RX_CHECKSUM);
-}
-
-static int sky2_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct sky2_port *sky2 = netdev_priv(dev);
-
- if (data)
- sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
- else
- sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
-
- sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
- data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
-
- return 0;
-}
-
static u32 sky2_get_msglevel(struct net_device *netdev)
{
struct sky2_port *sky2 = netdev_priv(netdev);
@@ -3826,23 +3807,24 @@
}
/* blink LED's for finding board */
-static int sky2_phys_id(struct net_device *dev, u32 data)
+static int sky2_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct sky2_port *sky2 = netdev_priv(dev);
- unsigned int i;
- if (data == 0)
- data = UINT_MAX;
-
- for (i = 0; i < data; i++) {
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
+ case ETHTOOL_ID_INACTIVE:
+ sky2_led(sky2, MO_LED_NORM);
+ break;
+ case ETHTOOL_ID_ON:
sky2_led(sky2, MO_LED_ON);
- if (msleep_interruptible(500))
- break;
+ break;
+ case ETHTOOL_ID_OFF:
sky2_led(sky2, MO_LED_OFF);
- if (msleep_interruptible(500))
- break;
+ break;
}
- sky2_led(sky2, MO_LED_NORM);
return 0;
}
@@ -4083,34 +4065,6 @@
}
}
-/* In order to do Jumbo packets on these chips, need to turn off the
- * transmit store/forward. Therefore checksum offload won't work.
- */
-static int no_tx_offload(struct net_device *dev)
-{
- const struct sky2_port *sky2 = netdev_priv(dev);
- const struct sky2_hw *hw = sky2->hw;
-
- return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U;
-}
-
-static int sky2_set_tx_csum(struct net_device *dev, u32 data)
-{
- if (data && no_tx_offload(dev))
- return -EINVAL;
-
- return ethtool_op_set_tx_csum(dev, data);
-}
-
-
-static int sky2_set_tso(struct net_device *dev, u32 data)
-{
- if (data && no_tx_offload(dev))
- return -EINVAL;
-
- return ethtool_op_set_tso(dev, data);
-}
-
static int sky2_get_eeprom_len(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
@@ -4213,31 +4167,36 @@
return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
}
-static int sky2_set_flags(struct net_device *dev, u32 data)
+static u32 sky2_fix_features(struct net_device *dev, u32 features)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ const struct sky2_hw *hw = sky2->hw;
+
+ /* In order to do Jumbo packets on these chips, need to turn off the
+ * transmit store/forward. Therefore checksum offload won't work.
+ */
+ if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
+ features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
+
+ return features;
+}
+
+static int sky2_set_features(struct net_device *dev, u32 features)
{
struct sky2_port *sky2 = netdev_priv(dev);
- unsigned long old_feat = dev->features;
- u32 supported = 0;
- int rc;
+ u32 changed = dev->features ^ features;
- if (!(sky2->hw->flags & SKY2_HW_RSS_BROKEN))
- supported |= ETH_FLAG_RXHASH;
+ if (changed & NETIF_F_RXCSUM) {
+ u32 on = features & NETIF_F_RXCSUM;
+ sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+ }
- if (!(sky2->hw->flags & SKY2_HW_VLAN_BROKEN))
- supported |= ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN;
+ if (changed & NETIF_F_RXHASH)
+ rx_set_rss(dev, features);
- printk(KERN_DEBUG "sky2 set_flags: supported %x data %x\n",
- supported, data);
-
- rc = ethtool_op_set_flags(dev, data, supported);
- if (rc)
- return rc;
-
- if ((old_feat ^ dev->features) & NETIF_F_RXHASH)
- rx_set_rss(dev);
-
- if ((old_feat ^ dev->features) & NETIF_F_ALL_VLAN)
- sky2_vlan_mode(dev);
+ if (changed & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
+ sky2_vlan_mode(dev, features);
return 0;
}
@@ -4257,11 +4216,6 @@
.get_eeprom_len = sky2_get_eeprom_len,
.get_eeprom = sky2_get_eeprom,
.set_eeprom = sky2_set_eeprom,
- .set_sg = ethtool_op_set_sg,
- .set_tx_csum = sky2_set_tx_csum,
- .set_tso = sky2_set_tso,
- .get_rx_csum = sky2_get_rx_csum,
- .set_rx_csum = sky2_set_rx_csum,
.get_strings = sky2_get_strings,
.get_coalesce = sky2_get_coalesce,
.set_coalesce = sky2_set_coalesce,
@@ -4269,11 +4223,9 @@
.set_ringparam = sky2_set_ringparam,
.get_pauseparam = sky2_get_pauseparam,
.set_pauseparam = sky2_set_pauseparam,
- .phys_id = sky2_phys_id,
+ .set_phys_id = sky2_set_phys_id,
.get_sset_count = sky2_get_sset_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
- .set_flags = sky2_set_flags,
- .get_flags = ethtool_op_get_flags,
};
#ifdef CONFIG_SKY2_DEBUG
@@ -4553,6 +4505,8 @@
.ndo_set_mac_address = sky2_set_mac_address,
.ndo_set_multicast_list = sky2_set_multicast,
.ndo_change_mtu = sky2_change_mtu,
+ .ndo_fix_features = sky2_fix_features,
+ .ndo_set_features = sky2_set_features,
.ndo_tx_timeout = sky2_tx_timeout,
.ndo_get_stats64 = sky2_get_stats,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -4568,6 +4522,8 @@
.ndo_set_mac_address = sky2_set_mac_address,
.ndo_set_multicast_list = sky2_set_multicast,
.ndo_change_mtu = sky2_change_mtu,
+ .ndo_fix_features = sky2_fix_features,
+ .ndo_set_features = sky2_set_features,
.ndo_tx_timeout = sky2_tx_timeout,
.ndo_get_stats64 = sky2_get_stats,
},
@@ -4600,7 +4556,7 @@
/* Auto speed and flow control */
sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
if (hw->chip_id != CHIP_ID_YUKON_XL)
- sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
+ dev->hw_features |= NETIF_F_RXCSUM;
sky2->flow_mode = FC_BOTH;
@@ -4619,18 +4575,21 @@
sky2->port = port;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG
- | NETIF_F_TSO | NETIF_F_GRO;
+ dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
if (highmem)
dev->features |= NETIF_F_HIGHDMA;
/* Enable receive hashing unless hardware is known broken */
if (!(hw->flags & SKY2_HW_RSS_BROKEN))
- dev->features |= NETIF_F_RXHASH;
+ dev->hw_features |= NETIF_F_RXHASH;
- if (!(hw->flags & SKY2_HW_VLAN_BROKEN))
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
+ dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_features |= SKY2_VLAN_OFFLOADS;
+ }
+
+ dev->features |= dev->hw_features;
/* read the mac address */
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 0c6d10c..318c9ae 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2254,7 +2254,6 @@
u8 wol; /* WAKE_ bits */
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
u16 flags;
-#define SKY2_FLAG_RX_CHECKSUM 0x0001
#define SKY2_FLAG_AUTO_SPEED 0x0002
#define SKY2_FLAG_AUTO_PAUSE 0x0004
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 86cbb9e..8ec1a9a 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -853,7 +853,9 @@
/* Done. We have linked the TTY line to a channel. */
rtnl_unlock();
tty->receive_room = 65536; /* We don't flow control */
- return sl->dev->base_addr;
+
+ /* TTY layer expects 0 on success */
+ return 0;
err_free_bufs:
sl_free_bufs(sl);
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index d07c39c..0f29f26 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -156,7 +156,7 @@
{ 14, 15 }
};
-static short smc_mca_adapter_ids[] __initdata = {
+static const short smc_mca_adapter_ids[] __devinitconst = {
0x61c8,
0x61c9,
0x6fc0,
@@ -168,7 +168,7 @@
0x0000
};
-static char *smc_mca_adapter_names[] __initdata = {
+static const char *const smc_mca_adapter_names[] __devinitconst = {
"SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)",
"SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)",
"WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)",
@@ -199,7 +199,7 @@
#endif
};
-static int __init ultramca_probe(struct device *gen_dev)
+static int __devinit ultramca_probe(struct device *gen_dev)
{
unsigned short ioaddr;
struct net_device *dev;
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 66831f3..053863a 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1488,9 +1488,9 @@
SUPPORTED_TP | SUPPORTED_AUI;
if (lp->ctl_rspeed == 10)
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
else if (lp->ctl_rspeed == 100)
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
cmd->autoneg = AUTONEG_DISABLE;
if (lp->mii.phy_id==1)
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 43654a3..dc4805f 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1565,9 +1565,9 @@
SUPPORTED_TP | SUPPORTED_AUI;
if (lp->ctl_rspeed == 10)
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
else if (lp->ctl_rspeed == 100)
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
cmd->autoneg = AUTONEG_DISABLE;
cmd->transceiver = XCVR_INTERNAL;
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 4b42ecc..c6d47d1 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -29,6 +29,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -69,6 +71,17 @@
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+struct smsc911x_data;
+
+struct smsc911x_ops {
+ u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
+ void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
+ void (*rx_readfifo)(struct smsc911x_data *pdata,
+ unsigned int *buf, unsigned int wordcount);
+ void (*tx_writefifo)(struct smsc911x_data *pdata,
+ unsigned int *buf, unsigned int wordcount);
+};
+
struct smsc911x_data {
void __iomem *ioaddr;
@@ -116,8 +129,14 @@
unsigned int clear_bits_mask;
unsigned int hashhi;
unsigned int hashlo;
+
+ /* register access functions */
+ const struct smsc911x_ops *ops;
};
+/* Easy access to information */
+#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
+
static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
{
if (pdata->config.flags & SMSC911X_USE_32BIT)
@@ -131,13 +150,29 @@
return 0;
}
+static inline u32
+__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
+{
+ if (pdata->config.flags & SMSC911X_USE_32BIT)
+ return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
+
+ if (pdata->config.flags & SMSC911X_USE_16BIT)
+ return (readw(pdata->ioaddr +
+ __smsc_shift(pdata, reg)) & 0xFFFF) |
+ ((readw(pdata->ioaddr +
+ __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
+
+ BUG();
+ return 0;
+}
+
static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
{
u32 data;
unsigned long flags;
spin_lock_irqsave(&pdata->dev_lock, flags);
- data = __smsc911x_reg_read(pdata, reg);
+ data = pdata->ops->reg_read(pdata, reg);
spin_unlock_irqrestore(&pdata->dev_lock, flags);
return data;
@@ -160,13 +195,32 @@
BUG();
}
+static inline void
+__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
+{
+ if (pdata->config.flags & SMSC911X_USE_32BIT) {
+ writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
+ return;
+ }
+
+ if (pdata->config.flags & SMSC911X_USE_16BIT) {
+ writew(val & 0xFFFF,
+ pdata->ioaddr + __smsc_shift(pdata, reg));
+ writew((val >> 16) & 0xFFFF,
+ pdata->ioaddr + __smsc_shift(pdata, reg + 2));
+ return;
+ }
+
+ BUG();
+}
+
static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
u32 val)
{
unsigned long flags;
spin_lock_irqsave(&pdata->dev_lock, flags);
- __smsc911x_reg_write(pdata, reg, val);
+ pdata->ops->reg_write(pdata, reg, val);
spin_unlock_irqrestore(&pdata->dev_lock, flags);
}
@@ -202,6 +256,40 @@
spin_unlock_irqrestore(&pdata->dev_lock, flags);
}
+/* Writes a packet to the TX_DATA_FIFO - shifted version */
+static inline void
+smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
+ unsigned int wordcount)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdata->dev_lock, flags);
+
+ if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+ while (wordcount--)
+ __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
+ swab32(*buf++));
+ goto out;
+ }
+
+ if (pdata->config.flags & SMSC911X_USE_32BIT) {
+ writesl(pdata->ioaddr + __smsc_shift(pdata,
+ TX_DATA_FIFO), buf, wordcount);
+ goto out;
+ }
+
+ if (pdata->config.flags & SMSC911X_USE_16BIT) {
+ while (wordcount--)
+ __smsc911x_reg_write_shift(pdata,
+ TX_DATA_FIFO, *buf++);
+ goto out;
+ }
+
+ BUG();
+out:
+ spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
/* Reads a packet out of the RX_DATA_FIFO */
static inline void
smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
@@ -234,6 +322,40 @@
spin_unlock_irqrestore(&pdata->dev_lock, flags);
}
+/* Reads a packet out of the RX_DATA_FIFO - shifted version */
+static inline void
+smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
+ unsigned int wordcount)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdata->dev_lock, flags);
+
+ if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+ while (wordcount--)
+ *buf++ = swab32(__smsc911x_reg_read_shift(pdata,
+ RX_DATA_FIFO));
+ goto out;
+ }
+
+ if (pdata->config.flags & SMSC911X_USE_32BIT) {
+ readsl(pdata->ioaddr + __smsc_shift(pdata,
+ RX_DATA_FIFO), buf, wordcount);
+ goto out;
+ }
+
+ if (pdata->config.flags & SMSC911X_USE_16BIT) {
+ while (wordcount--)
+ *buf++ = __smsc911x_reg_read_shift(pdata,
+ RX_DATA_FIFO);
+ goto out;
+ }
+
+ BUG();
+out:
+ spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
/* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read
* and smsc911x_mac_write, so assumes mac_lock is held */
static int smsc911x_mac_complete(struct smsc911x_data *pdata)
@@ -248,8 +370,8 @@
if (!(val & MAC_CSR_CMD_CSR_BUSY_))
return 0;
}
- SMSC_WARNING(HW, "Timed out waiting for MAC not BUSY. "
- "MAC_CSR_CMD: 0x%08X", val);
+ SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. "
+ "MAC_CSR_CMD: 0x%08X", val);
return -EIO;
}
@@ -262,7 +384,7 @@
temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
- SMSC_WARNING(HW, "MAC busy at entry");
+ SMSC_WARN(pdata, hw, "MAC busy at entry");
return 0xFFFFFFFF;
}
@@ -277,7 +399,7 @@
if (likely(smsc911x_mac_complete(pdata) == 0))
return smsc911x_reg_read(pdata, MAC_CSR_DATA);
- SMSC_WARNING(HW, "MAC busy after read");
+ SMSC_WARN(pdata, hw, "MAC busy after read");
return 0xFFFFFFFF;
}
@@ -291,8 +413,8 @@
temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
- SMSC_WARNING(HW,
- "smsc911x_mac_write failed, MAC busy at entry");
+ SMSC_WARN(pdata, hw,
+ "smsc911x_mac_write failed, MAC busy at entry");
return;
}
@@ -310,8 +432,7 @@
if (likely(smsc911x_mac_complete(pdata) == 0))
return;
- SMSC_WARNING(HW,
- "smsc911x_mac_write failed, MAC busy after write");
+ SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write");
}
/* Get a phy register */
@@ -326,8 +447,7 @@
/* Confirm MII not busy */
if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
- SMSC_WARNING(HW,
- "MII is busy in smsc911x_mii_read???");
+ SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???");
reg = -EIO;
goto out;
}
@@ -343,7 +463,7 @@
goto out;
}
- SMSC_WARNING(HW, "Timed out waiting for MII read to finish");
+ SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish");
reg = -EIO;
out:
@@ -364,8 +484,7 @@
/* Confirm MII not busy */
if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
- SMSC_WARNING(HW,
- "MII is busy in smsc911x_mii_write???");
+ SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???");
reg = -EIO;
goto out;
}
@@ -385,7 +504,7 @@
goto out;
}
- SMSC_WARNING(HW, "Timed out waiting for MII write to finish");
+ SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish");
reg = -EIO;
out:
@@ -426,18 +545,20 @@
unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
- SMSC_TRACE(HW, "Forcing internal PHY");
+ SMSC_TRACE(pdata, hw, "Forcing internal PHY");
pdata->using_extphy = 0;
} else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
- SMSC_TRACE(HW, "Forcing external PHY");
+ SMSC_TRACE(pdata, hw, "Forcing external PHY");
smsc911x_phy_enable_external(pdata);
pdata->using_extphy = 1;
} else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
- SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY");
+ SMSC_TRACE(pdata, hw,
+ "HW_CFG EXT_PHY_DET set, using external PHY");
smsc911x_phy_enable_external(pdata);
pdata->using_extphy = 1;
} else {
- SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY");
+ SMSC_TRACE(pdata, hw,
+ "HW_CFG EXT_PHY_DET clear, using internal PHY");
pdata->using_extphy = 0;
}
}
@@ -499,7 +620,7 @@
wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
wrsz >>= 2;
- smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
+ pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
/* Wait till transmit is done */
i = 60;
@@ -509,13 +630,13 @@
} while ((i--) && (!status));
if (!status) {
- SMSC_WARNING(HW, "Failed to transmit "
- "during loopback test");
+ SMSC_WARN(pdata, hw,
+ "Failed to transmit during loopback test");
continue;
}
if (status & TX_STS_ES_) {
- SMSC_WARNING(HW, "Transmit encountered "
- "errors during loopback test");
+ SMSC_WARN(pdata, hw,
+ "Transmit encountered errors during loopback test");
continue;
}
@@ -527,13 +648,13 @@
} while ((i--) && (!status));
if (!status) {
- SMSC_WARNING(HW,
- "Failed to receive during loopback test");
+ SMSC_WARN(pdata, hw,
+ "Failed to receive during loopback test");
continue;
}
if (status & RX_STS_ES_) {
- SMSC_WARNING(HW, "Receive encountered "
- "errors during loopback test");
+ SMSC_WARN(pdata, hw,
+ "Receive encountered errors during loopback test");
continue;
}
@@ -543,12 +664,12 @@
rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
rdsz >>= 2;
- smsc911x_rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
+ pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
if (pktlength != (MIN_PACKET_SIZE + 4)) {
- SMSC_WARNING(HW, "Unexpected packet size "
- "during loop back test, size=%d, will retry",
- pktlength);
+ SMSC_WARN(pdata, hw, "Unexpected packet size "
+ "during loop back test, size=%d, will retry",
+ pktlength);
} else {
unsigned int j;
int mismatch = 0;
@@ -560,12 +681,12 @@
}
}
if (!mismatch) {
- SMSC_TRACE(HW, "Successfully verified "
+ SMSC_TRACE(pdata, hw, "Successfully verified "
"loopback packet");
return 0;
} else {
- SMSC_WARNING(HW, "Data mismatch "
- "during loop back test, will retry");
+ SMSC_WARN(pdata, hw, "Data mismatch "
+ "during loop back test, will retry");
}
}
}
@@ -582,7 +703,7 @@
BUG_ON(!phy_dev);
BUG_ON(!phy_dev->bus);
- SMSC_TRACE(HW, "Performing PHY BCR Reset");
+ SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset");
smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET);
do {
msleep(1);
@@ -591,7 +712,7 @@
} while ((i--) && (temp & BMCR_RESET));
if (temp & BMCR_RESET) {
- SMSC_WARNING(HW, "PHY reset failed to complete.");
+ SMSC_WARN(pdata, hw, "PHY reset failed to complete");
return -EIO;
}
/* Extra delay required because the phy may not be completed with
@@ -695,11 +816,11 @@
else
afc &= ~0xF;
- SMSC_TRACE(HW, "rx pause %s, tx pause %s",
- (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
- (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+ SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",
+ (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+ (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
} else {
- SMSC_TRACE(HW, "half duplex");
+ SMSC_TRACE(pdata, hw, "half duplex");
flow = 0;
afc |= 0xF;
}
@@ -722,17 +843,17 @@
if (phy_dev->duplex != pdata->last_duplex) {
unsigned int mac_cr;
- SMSC_TRACE(HW, "duplex state has changed");
+ SMSC_TRACE(pdata, hw, "duplex state has changed");
spin_lock_irqsave(&pdata->mac_lock, flags);
mac_cr = smsc911x_mac_read(pdata, MAC_CR);
if (phy_dev->duplex) {
- SMSC_TRACE(HW,
- "configuring for full duplex mode");
+ SMSC_TRACE(pdata, hw,
+ "configuring for full duplex mode");
mac_cr |= MAC_CR_FDPX_;
} else {
- SMSC_TRACE(HW,
- "configuring for half duplex mode");
+ SMSC_TRACE(pdata, hw,
+ "configuring for half duplex mode");
mac_cr &= ~MAC_CR_FDPX_;
}
smsc911x_mac_write(pdata, MAC_CR, mac_cr);
@@ -744,9 +865,9 @@
carrier = netif_carrier_ok(dev);
if (carrier != pdata->last_carrier) {
- SMSC_TRACE(HW, "carrier state has changed");
+ SMSC_TRACE(pdata, hw, "carrier state has changed");
if (carrier) {
- SMSC_TRACE(HW, "configuring for carrier OK");
+ SMSC_TRACE(pdata, hw, "configuring for carrier OK");
if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
(!pdata->using_extphy)) {
/* Restore original GPIO configuration */
@@ -755,7 +876,7 @@
pdata->gpio_setting);
}
} else {
- SMSC_TRACE(HW, "configuring for no carrier");
+ SMSC_TRACE(pdata, hw, "configuring for no carrier");
/* Check global setting that LED1
* usage is 10/100 indicator */
pdata->gpio_setting = smsc911x_reg_read(pdata,
@@ -787,25 +908,25 @@
/* find the first phy */
phydev = phy_find_first(pdata->mii_bus);
if (!phydev) {
- pr_err("%s: no PHY found\n", dev->name);
+ netdev_err(dev, "no PHY found\n");
return -ENODEV;
}
- SMSC_TRACE(PROBE, "PHY: addr %d, phy_id 0x%08X",
- phydev->addr, phydev->phy_id);
+ SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",
+ phydev->addr, phydev->phy_id);
ret = phy_connect_direct(dev, phydev,
&smsc911x_phy_adjust_link, 0,
pdata->config.phy_interface);
if (ret) {
- pr_err("%s: Could not attach to PHY\n", dev->name);
+ netdev_err(dev, "Could not attach to PHY\n");
return ret;
}
- pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
- dev->name, phydev->drv->name,
- dev_name(&phydev->dev), phydev->irq);
+ netdev_info(dev,
+ "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
/* mask with MAC supported features */
phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
@@ -818,13 +939,13 @@
#ifdef USE_PHY_WORK_AROUND
if (smsc911x_phy_loopbacktest(dev) < 0) {
- SMSC_WARNING(HW, "Failed Loop Back Test");
+ SMSC_WARN(pdata, hw, "Failed Loop Back Test");
return -ENODEV;
}
- SMSC_TRACE(HW, "Passed Loop Back Test");
+ SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
#endif /* USE_PHY_WORK_AROUND */
- SMSC_TRACE(HW, "phy initialised successfully");
+ SMSC_TRACE(pdata, hw, "phy initialised successfully");
return 0;
}
@@ -860,8 +981,8 @@
smsc911x_phy_initialise_external(pdata);
break;
default:
- SMSC_TRACE(HW, "External PHY is not supported, "
- "using internal PHY");
+ SMSC_TRACE(pdata, hw, "External PHY is not supported, "
+ "using internal PHY");
pdata->using_extphy = 0;
break;
}
@@ -872,12 +993,12 @@
}
if (mdiobus_register(pdata->mii_bus)) {
- SMSC_WARNING(PROBE, "Error registering mii bus");
+ SMSC_WARN(pdata, probe, "Error registering mii bus");
goto err_out_free_bus_2;
}
if (smsc911x_mii_probe(dev) < 0) {
- SMSC_WARNING(PROBE, "Error registering mii bus");
+ SMSC_WARN(pdata, probe, "Error registering mii bus");
goto err_out_unregister_bus_3;
}
@@ -913,8 +1034,7 @@
* does not reference a hardware defined reserved bit
* but rather a driver defined one.
*/
- SMSC_WARNING(HW,
- "Packet tag reserved bit is high");
+ SMSC_WARN(pdata, hw, "Packet tag reserved bit is high");
} else {
if (unlikely(tx_stat & TX_STS_ES_)) {
dev->stats.tx_errors++;
@@ -977,8 +1097,8 @@
} while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout);
if (unlikely(timeout == 0))
- SMSC_WARNING(HW, "Timed out waiting for "
- "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
+ SMSC_WARN(pdata, hw, "Timed out waiting for "
+ "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
} else {
unsigned int temp;
while (pktwords--)
@@ -1021,8 +1141,8 @@
smsc911x_rx_counterrors(dev, rxstat);
if (unlikely(rxstat & RX_STS_ES_)) {
- SMSC_WARNING(RX_ERR,
- "Discarding packet with error bit set");
+ SMSC_WARN(pdata, rx_err,
+ "Discarding packet with error bit set");
/* Packet has an error, discard it and continue with
* the next */
smsc911x_rx_fastforward(pdata, pktwords);
@@ -1032,8 +1152,8 @@
skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN);
if (unlikely(!skb)) {
- SMSC_WARNING(RX_ERR,
- "Unable to allocate skb for rx packet");
+ SMSC_WARN(pdata, rx_err,
+ "Unable to allocate skb for rx packet");
/* Drop the packet and stop this polling iteration */
smsc911x_rx_fastforward(pdata, pktwords);
dev->stats.rx_dropped++;
@@ -1046,8 +1166,8 @@
/* Align IP on 16B boundary */
skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, pktlength - 4);
- smsc911x_rx_readfifo(pdata, (unsigned int *)skb->head,
- pktwords);
+ pdata->ops->rx_readfifo(pdata,
+ (unsigned int *)skb->head, pktwords);
skb->protocol = eth_type_trans(skb, dev);
skb_checksum_none_assert(skb);
netif_receive_skb(skb);
@@ -1083,8 +1203,8 @@
smsc911x_mac_write(pdata, MAC_CR, mac_cr);
smsc911x_mac_write(pdata, HASHH, pdata->hashhi);
smsc911x_mac_write(pdata, HASHL, pdata->hashlo);
- SMSC_TRACE(HW, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
- mac_cr, pdata->hashhi, pdata->hashlo);
+ SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
+ mac_cr, pdata->hashhi, pdata->hashlo);
}
static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
@@ -1102,7 +1222,7 @@
/* Check Rx has stopped */
if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_)
- SMSC_WARNING(DRV, "Rx not stopped");
+ SMSC_WARN(pdata, drv, "Rx not stopped");
/* Perform the update - safe to do now Rx has stopped */
smsc911x_rx_multicast_update(pdata);
@@ -1131,7 +1251,7 @@
} while ((--timeout) && (temp & HW_CFG_SRST_));
if (unlikely(temp & HW_CFG_SRST_)) {
- SMSC_WARNING(DRV, "Failed to complete reset");
+ SMSC_WARN(pdata, drv, "Failed to complete reset");
return -EIO;
}
return 0;
@@ -1160,18 +1280,18 @@
/* if the phy is not yet registered, retry later*/
if (!pdata->phy_dev) {
- SMSC_WARNING(HW, "phy_dev is NULL");
+ SMSC_WARN(pdata, hw, "phy_dev is NULL");
return -EAGAIN;
}
if (!is_valid_ether_addr(dev->dev_addr)) {
- SMSC_WARNING(HW, "dev_addr is not a valid MAC address");
+ SMSC_WARN(pdata, hw, "dev_addr is not a valid MAC address");
return -EADDRNOTAVAIL;
}
/* Reset the LAN911x */
if (smsc911x_soft_reset(pdata)) {
- SMSC_WARNING(HW, "soft reset failed");
+ SMSC_WARN(pdata, hw, "soft reset failed");
return -EIO;
}
@@ -1191,8 +1311,8 @@
}
if (unlikely(timeout == 0))
- SMSC_WARNING(IFUP,
- "Timed out waiting for EEPROM busy bit to clear");
+ SMSC_WARN(pdata, ifup,
+ "Timed out waiting for EEPROM busy bit to clear");
smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
@@ -1210,22 +1330,22 @@
intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
if (pdata->config.irq_polarity) {
- SMSC_TRACE(IFUP, "irq polarity: active high");
+ SMSC_TRACE(pdata, ifup, "irq polarity: active high");
intcfg |= INT_CFG_IRQ_POL_;
} else {
- SMSC_TRACE(IFUP, "irq polarity: active low");
+ SMSC_TRACE(pdata, ifup, "irq polarity: active low");
}
if (pdata->config.irq_type) {
- SMSC_TRACE(IFUP, "irq type: push-pull");
+ SMSC_TRACE(pdata, ifup, "irq type: push-pull");
intcfg |= INT_CFG_IRQ_TYPE_;
} else {
- SMSC_TRACE(IFUP, "irq type: open drain");
+ SMSC_TRACE(pdata, ifup, "irq type: open drain");
}
smsc911x_reg_write(pdata, INT_CFG, intcfg);
- SMSC_TRACE(IFUP, "Testing irq handler using IRQ %d", dev->irq);
+ SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);
pdata->software_irq_signal = 0;
smp_wmb();
@@ -1241,14 +1361,15 @@
}
if (!pdata->software_irq_signal) {
- dev_warn(&dev->dev, "ISR failed signaling test (IRQ %d)\n",
- dev->irq);
+ netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
+ dev->irq);
return -ENODEV;
}
- SMSC_TRACE(IFUP, "IRQ handler passed test using IRQ %d", dev->irq);
+ SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
+ dev->irq);
- dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
- (unsigned long)pdata->ioaddr, dev->irq);
+ netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
+ (unsigned long)pdata->ioaddr, dev->irq);
/* Reset the last known duplex and carrier */
pdata->last_duplex = -1;
@@ -1313,7 +1434,7 @@
if (pdata->phy_dev)
phy_stop(pdata->phy_dev);
- SMSC_TRACE(IFDOWN, "Interface stopped");
+ SMSC_TRACE(pdata, ifdown, "Interface stopped");
return 0;
}
@@ -1331,8 +1452,8 @@
freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_;
if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD))
- SMSC_WARNING(TX_ERR,
- "Tx data fifo low, space available: %d", freespace);
+ SMSC_WARN(pdata, tx_err,
+ "Tx data fifo low, space available: %d", freespace);
/* Word alignment adjustment */
tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16;
@@ -1350,7 +1471,7 @@
wrsz += (u32)((ulong)skb->data & 0x3);
wrsz >>= 2;
- smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
+ pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
freespace -= (skb->len + 32);
dev_kfree_skb(skb);
@@ -1432,7 +1553,7 @@
* receiving data */
if (!pdata->multicast_update_pending) {
unsigned int temp;
- SMSC_TRACE(HW, "scheduling mcast update");
+ SMSC_TRACE(pdata, hw, "scheduling mcast update");
pdata->multicast_update_pending = 1;
/* Request the hardware to stop, then perform the
@@ -1474,7 +1595,7 @@
if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) {
/* Called when there is a multicast update scheduled and
* it is now safe to complete the update */
- SMSC_TRACE(INTR, "RX Stop interrupt");
+ SMSC_TRACE(pdata, intr, "RX Stop interrupt");
smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
if (pdata->multicast_update_pending)
smsc911x_rx_multicast_update_workaround(pdata);
@@ -1491,7 +1612,7 @@
}
if (unlikely(intsts & inten & INT_STS_RXE_)) {
- SMSC_TRACE(INTR, "RX Error interrupt");
+ SMSC_TRACE(pdata, intr, "RX Error interrupt");
smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_);
serviced = IRQ_HANDLED;
}
@@ -1505,8 +1626,7 @@
/* Schedule a NAPI poll */
__napi_schedule(&pdata->napi);
} else {
- SMSC_WARNING(RX_ERR,
- "napi_schedule_prep failed");
+ SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed");
}
serviced = IRQ_HANDLED;
}
@@ -1543,7 +1663,7 @@
smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
spin_unlock_irq(&pdata->mac_lock);
- dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr);
+ netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
return 0;
}
@@ -1649,9 +1769,9 @@
int timeout = 100;
u32 e2cmd;
- SMSC_TRACE(DRV, "op 0x%08x", op);
+ SMSC_TRACE(pdata, drv, "op 0x%08x", op);
if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
- SMSC_WARNING(DRV, "Busy at start");
+ SMSC_WARN(pdata, drv, "Busy at start");
return -EBUSY;
}
@@ -1664,12 +1784,12 @@
} while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
if (!timeout) {
- SMSC_TRACE(DRV, "TIMED OUT");
+ SMSC_TRACE(pdata, drv, "TIMED OUT");
return -EAGAIN;
}
if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
- SMSC_TRACE(DRV, "Error occurred during eeprom operation");
+ SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");
return -EINVAL;
}
@@ -1682,7 +1802,7 @@
u32 op = E2P_CMD_EPC_CMD_READ_ | address;
int ret;
- SMSC_TRACE(DRV, "address 0x%x", address);
+ SMSC_TRACE(pdata, drv, "address 0x%x", address);
ret = smsc911x_eeprom_send_cmd(pdata, op);
if (!ret)
@@ -1698,7 +1818,7 @@
u32 temp;
int ret;
- SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data);
+ SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);
ret = smsc911x_eeprom_send_cmd(pdata, op);
if (!ret) {
@@ -1811,26 +1931,26 @@
struct smsc911x_data *pdata = netdev_priv(dev);
unsigned int byte_test;
- SMSC_TRACE(PROBE, "Driver Parameters:");
- SMSC_TRACE(PROBE, "LAN base: 0x%08lX",
- (unsigned long)pdata->ioaddr);
- SMSC_TRACE(PROBE, "IRQ: %d", dev->irq);
- SMSC_TRACE(PROBE, "PHY will be autodetected.");
+ SMSC_TRACE(pdata, probe, "Driver Parameters:");
+ SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
+ (unsigned long)pdata->ioaddr);
+ SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);
+ SMSC_TRACE(pdata, probe, "PHY will be autodetected.");
spin_lock_init(&pdata->dev_lock);
spin_lock_init(&pdata->mac_lock);
if (pdata->ioaddr == 0) {
- SMSC_WARNING(PROBE, "pdata->ioaddr: 0x00000000");
+ SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000");
return -ENODEV;
}
/* Check byte ordering */
byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
- SMSC_TRACE(PROBE, "BYTE_TEST: 0x%08X", byte_test);
+ SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
if (byte_test == 0x43218765) {
- SMSC_TRACE(PROBE, "BYTE_TEST looks swapped, "
- "applying WORD_SWAP");
+ SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "
+ "applying WORD_SWAP");
smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff);
/* 1 dummy read of BYTE_TEST is needed after a write to
@@ -1841,12 +1961,13 @@
}
if (byte_test != 0x87654321) {
- SMSC_WARNING(DRV, "BYTE_TEST: 0x%08X", byte_test);
+ SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test);
if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) {
- SMSC_WARNING(PROBE,
- "top 16 bits equal to bottom 16 bits");
- SMSC_TRACE(PROBE, "This may mean the chip is set "
- "for 32 bit while the bus is reading 16 bit");
+ SMSC_WARN(pdata, probe,
+ "top 16 bits equal to bottom 16 bits");
+ SMSC_TRACE(pdata, probe,
+ "This may mean the chip is set "
+ "for 32 bit while the bus is reading 16 bit");
}
return -ENODEV;
}
@@ -1881,17 +2002,18 @@
break;
default:
- SMSC_WARNING(PROBE, "LAN911x not identified, idrev: 0x%08X",
- pdata->idrev);
+ SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X",
+ pdata->idrev);
return -ENODEV;
}
- SMSC_TRACE(PROBE, "LAN911x identified, idrev: 0x%08X, generation: %d",
- pdata->idrev, pdata->generation);
+ SMSC_TRACE(pdata, probe,
+ "LAN911x identified, idrev: 0x%08X, generation: %d",
+ pdata->idrev, pdata->generation);
if (pdata->generation == 0)
- SMSC_WARNING(PROBE,
- "This driver is not intended for this chip revision");
+ SMSC_WARN(pdata, probe,
+ "This driver is not intended for this chip revision");
/* workaround for platforms without an eeprom, where the mac address
* is stored elsewhere and set by the bootloader. This saves the
@@ -1931,7 +2053,7 @@
BUG_ON(!pdata->ioaddr);
BUG_ON(!pdata->phy_dev);
- SMSC_TRACE(IFDOWN, "Stopping driver.");
+ SMSC_TRACE(pdata, ifdown, "Stopping driver");
phy_disconnect(pdata->phy_dev);
pdata->phy_dev = NULL;
@@ -1955,6 +2077,22 @@
return 0;
}
+/* standard register acces */
+static const struct smsc911x_ops standard_smsc911x_ops = {
+ .reg_read = __smsc911x_reg_read,
+ .reg_write = __smsc911x_reg_write,
+ .rx_readfifo = smsc911x_rx_readfifo,
+ .tx_writefifo = smsc911x_tx_writefifo,
+};
+
+/* shifted register access */
+static const struct smsc911x_ops shifted_smsc911x_ops = {
+ .reg_read = __smsc911x_reg_read_shift,
+ .reg_write = __smsc911x_reg_write_shift,
+ .rx_readfifo = smsc911x_rx_readfifo_shift,
+ .tx_writefifo = smsc911x_tx_writefifo_shift,
+};
+
static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
{
struct net_device *dev;
@@ -1965,11 +2103,11 @@
int res_size, irq_flags;
int retval;
- pr_info("%s: Driver version %s.\n", SMSC_CHIPNAME, SMSC_DRV_VERSION);
+ pr_info("Driver version %s\n", SMSC_DRV_VERSION);
/* platform data specifies irq & dynamic bus configuration */
if (!pdev->dev.platform_data) {
- pr_warning("%s: platform_data not provided\n", SMSC_CHIPNAME);
+ pr_warn("platform_data not provided\n");
retval = -ENODEV;
goto out_0;
}
@@ -1979,8 +2117,7 @@
if (!res)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
- pr_warning("%s: Could not allocate resource.\n",
- SMSC_CHIPNAME);
+ pr_warn("Could not allocate resource\n");
retval = -ENODEV;
goto out_0;
}
@@ -1988,8 +2125,7 @@
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
- pr_warning("%s: Could not allocate irq resource.\n",
- SMSC_CHIPNAME);
+ pr_warn("Could not allocate irq resource\n");
retval = -ENODEV;
goto out_0;
}
@@ -2001,7 +2137,7 @@
dev = alloc_etherdev(sizeof(struct smsc911x_data));
if (!dev) {
- pr_warning("%s: Could not allocate device.\n", SMSC_CHIPNAME);
+ pr_warn("Could not allocate device\n");
retval = -ENOMEM;
goto out_release_io_1;
}
@@ -2021,12 +2157,17 @@
pdata->msg_enable = ((1 << debug) - 1);
if (pdata->ioaddr == NULL) {
- SMSC_WARNING(PROBE,
- "Error smsc911x base address invalid");
+ SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
retval = -ENOMEM;
goto out_free_netdev_2;
}
+ /* assume standard, non-shifted, access to HW registers */
+ pdata->ops = &standard_smsc911x_ops;
+ /* apply the right access if shifting is needed */
+ if (config->shift)
+ pdata->ops = &shifted_smsc911x_ops;
+
retval = smsc911x_init(dev);
if (retval < 0)
goto out_unmap_io_3;
@@ -2047,8 +2188,8 @@
retval = request_irq(dev->irq, smsc911x_irqhandler,
irq_flags | IRQF_SHARED, dev->name, dev);
if (retval) {
- SMSC_WARNING(PROBE,
- "Unable to claim requested irq: %d", dev->irq);
+ SMSC_WARN(pdata, probe,
+ "Unable to claim requested irq: %d", dev->irq);
goto out_unmap_io_3;
}
@@ -2056,17 +2197,16 @@
retval = register_netdev(dev);
if (retval) {
- SMSC_WARNING(PROBE,
- "Error %i registering device", retval);
+ SMSC_WARN(pdata, probe, "Error %i registering device", retval);
goto out_unset_drvdata_4;
} else {
- SMSC_TRACE(PROBE, "Network interface: \"%s\"", dev->name);
+ SMSC_TRACE(pdata, probe,
+ "Network interface: \"%s\"", dev->name);
}
retval = smsc911x_mii_init(pdev, dev);
if (retval) {
- SMSC_WARNING(PROBE,
- "Error %i initialising mii", retval);
+ SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
goto out_unregister_netdev_5;
}
@@ -2075,10 +2215,12 @@
/* Check if mac address has been specified when bringing interface up */
if (is_valid_ether_addr(dev->dev_addr)) {
smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
- SMSC_TRACE(PROBE, "MAC Address is specified by configuration");
+ SMSC_TRACE(pdata, probe,
+ "MAC Address is specified by configuration");
} else if (is_valid_ether_addr(pdata->config.mac)) {
memcpy(dev->dev_addr, pdata->config.mac, 6);
- SMSC_TRACE(PROBE, "MAC Address specified by platform data");
+ SMSC_TRACE(pdata, probe,
+ "MAC Address specified by platform data");
} else {
/* Try reading mac address from device. if EEPROM is present
* it will already have been set */
@@ -2086,20 +2228,20 @@
if (is_valid_ether_addr(dev->dev_addr)) {
/* eeprom values are valid so use them */
- SMSC_TRACE(PROBE,
- "Mac Address is read from LAN911x EEPROM");
+ SMSC_TRACE(pdata, probe,
+ "Mac Address is read from LAN911x EEPROM");
} else {
/* eeprom values are invalid, generate random MAC */
random_ether_addr(dev->dev_addr);
smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
- SMSC_TRACE(PROBE,
- "MAC Address is set to random_ether_addr");
+ SMSC_TRACE(pdata, probe,
+ "MAC Address is set to random_ether_addr");
}
}
spin_unlock_irq(&pdata->mac_lock);
- dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr);
+ netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
return 0;
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index 50f712e..8d67aac 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -33,25 +33,21 @@
* can be successfully looped back */
#define USE_PHY_WORK_AROUND
-#define DPRINTK(nlevel, klevel, fmt, args...) \
- ((void)((NETIF_MSG_##nlevel & pdata->msg_enable) && \
- printk(KERN_##klevel "%s: %s: " fmt "\n", \
- pdata->dev->name, __func__, ## args)))
-
#if USE_DEBUG >= 1
-#define SMSC_WARNING(nlevel, fmt, args...) \
- DPRINTK(nlevel, WARNING, fmt, ## args)
+#define SMSC_WARN(pdata, nlevel, fmt, args...) \
+ netif_warn(pdata, nlevel, (pdata)->dev, \
+ "%s: " fmt "\n", __func__, ##args)
#else
-#define SMSC_WARNING(nlevel, fmt, args...) \
- ({ do {} while (0); 0; })
+#define SMSC_WARN(pdata, nlevel, fmt, args...) \
+ no_printk(fmt "\n", ##args)
#endif
#if USE_DEBUG >= 2
-#define SMSC_TRACE(nlevel, fmt, args...) \
- DPRINTK(nlevel, INFO, fmt, ## args)
+#define SMSC_TRACE(pdata, nlevel, fmt, args...) \
+ netif_info(pdata, nlevel, pdata->dev, fmt "\n", ##args)
#else
-#define SMSC_TRACE(nlevel, fmt, args...) \
- ({ do {} while (0); 0; })
+#define SMSC_TRACE(pdata, nlevel, fmt, args...) \
+ no_printk(fmt "\n", ##args)
#endif
#ifdef CONFIG_DEBUG_SPINLOCK
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index cb6bcca..949f124 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -994,15 +994,13 @@
skb->protocol = eth_type_trans(skb, netdev);
/* checksum offload */
- if (card->options.rx_csum) {
+ skb_checksum_none_assert(skb);
+ if (netdev->features & NETIF_F_RXCSUM) {
if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
!(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
skb->ip_summed = CHECKSUM_UNNECESSARY;
- else
- skb_checksum_none_assert(skb);
- } else
- skb_checksum_none_assert(skb);
+ }
if (data_status & SPIDER_NET_VLAN_PACKET) {
/* further enhancements: HW-accel VLAN
@@ -2322,14 +2320,15 @@
card->aneg_timer.function = spider_net_link_phy;
card->aneg_timer.data = (unsigned long) card;
- card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
-
netif_napi_add(netdev, &card->napi,
spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
spider_net_setup_netdev_ops(netdev);
- netdev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX;
+ netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+ if (SPIDER_NET_RX_CSUM_DEFAULT)
+ netdev->features |= NETIF_F_RXCSUM;
+ netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
/* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
* NETIF_F_HW_VLAN_FILTER */
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 05f74cb..020f64a 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -429,12 +429,6 @@
* 701b8000 would be correct, but every packets gets that flag */
#define SPIDER_NET_DESTROY_RX_FLAGS 0x700b8000
-/* this will be bigger some time */
-struct spider_net_options {
- int rx_csum; /* for rx: if 0 ip_summed=NONE,
- if 1 and hw has verified, ip_summed=UNNECESSARY */
-};
-
#define SPIDER_NET_DEFAULT_MSG ( NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK | \
@@ -487,7 +481,6 @@
/* for ethtool */
int msg_enable;
struct spider_net_extra_stats spider_stats;
- struct spider_net_options options;
/* Must be last item in struct */
struct spider_net_descr darray[0];
diff --git a/drivers/net/spider_net_ethtool.c b/drivers/net/spider_net_ethtool.c
index 5bae728..9c288cd 100644
--- a/drivers/net/spider_net_ethtool.c
+++ b/drivers/net/spider_net_ethtool.c
@@ -58,7 +58,7 @@
cmd->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE);
cmd->port = PORT_FIBRE;
- cmd->speed = card->phy.speed;
+ ethtool_cmd_speed_set(cmd, card->phy.speed);
cmd->duplex = DUPLEX_FULL;
return 0;
@@ -115,24 +115,6 @@
return 0;
}
-static u32
-spider_net_ethtool_get_rx_csum(struct net_device *netdev)
-{
- struct spider_net_card *card = netdev_priv(netdev);
-
- return card->options.rx_csum;
-}
-
-static int
-spider_net_ethtool_set_rx_csum(struct net_device *netdev, u32 n)
-{
- struct spider_net_card *card = netdev_priv(netdev);
-
- card->options.rx_csum = n;
- return 0;
-}
-
-
static void
spider_net_ethtool_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ering)
@@ -189,9 +171,6 @@
.set_msglevel = spider_net_ethtool_set_msglevel,
.get_link = ethtool_op_get_link,
.nway_reset = spider_net_ethtool_nway_reset,
- .get_rx_csum = spider_net_ethtool_get_rx_csum,
- .set_rx_csum = spider_net_ethtool_set_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
.get_ringparam = spider_net_ethtool_get_ringparam,
.get_strings = spider_net_get_strings,
.get_sset_count = spider_net_get_sset_count,
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
index 6ae4c3f..f20455c 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -178,10 +178,11 @@
{
unsigned int pmt = 0;
- if (mode == WAKE_MAGIC) {
+ if (mode & WAKE_MAGIC) {
CHIP_DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
pmt |= power_down | magic_pkt_en;
- } else if (mode == WAKE_UCAST) {
+ }
+ if (mode & WAKE_UCAST) {
CHIP_DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
pmt |= global_unicast;
}
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 5f06c47..2b076b3 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -21,7 +21,6 @@
*******************************************************************************/
#define DRV_MODULE_VERSION "Nov_2010"
-#include <linux/platform_device.h>
#include <linux/stmmac.h>
#include "common.h"
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index fd719ed..ae5213a 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -197,13 +197,6 @@
}
}
-static u32 stmmac_ethtool_get_rx_csum(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
-
- return priv->rx_coe;
-}
-
static void
stmmac_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
@@ -241,20 +234,11 @@
new_pause |= FLOW_TX;
priv->flow_ctrl = new_pause;
+ phy->autoneg = pause->autoneg;
if (phy->autoneg) {
- if (netif_running(netdev)) {
- struct ethtool_cmd cmd;
- /* auto-negotiation automatically restarted */
- cmd.cmd = ETHTOOL_NWAY_RST;
- cmd.supported = phy->supported;
- cmd.advertising = phy->advertising;
- cmd.autoneg = phy->autoneg;
- cmd.speed = phy->speed;
- cmd.duplex = phy->duplex;
- cmd.phy_address = phy->addr;
- ret = phy_ethtool_sset(phy, &cmd);
- }
+ if (netif_running(netdev))
+ ret = phy_start_aneg(phy);
} else
priv->hw->mac->flow_ctrl(priv->ioaddr, phy->duplex,
priv->flow_ctrl, priv->pause);
@@ -315,7 +299,7 @@
spin_lock_irq(&priv->lock);
if (device_can_wakeup(priv->device)) {
- wol->supported = WAKE_MAGIC;
+ wol->supported = WAKE_MAGIC | WAKE_UCAST;
wol->wolopts = priv->wolopts;
}
spin_unlock_irq(&priv->lock);
@@ -324,7 +308,7 @@
static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct stmmac_priv *priv = netdev_priv(dev);
- u32 support = WAKE_MAGIC;
+ u32 support = WAKE_MAGIC | WAKE_UCAST;
if (!device_can_wakeup(priv->device))
return -EINVAL;
@@ -358,11 +342,6 @@
.get_regs = stmmac_ethtool_gregs,
.get_regs_len = stmmac_ethtool_get_regs_len,
.get_link = ethtool_op_get_link,
- .get_rx_csum = stmmac_ethtool_get_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
.get_pauseparam = stmmac_get_pauseparam,
.set_pauseparam = stmmac_set_pauseparam,
.get_ethtool_stats = stmmac_get_ethtool_stats,
@@ -370,8 +349,6 @@
.get_wol = stmmac_get_wol,
.set_wol = stmmac_set_wol,
.get_sset_count = stmmac_get_sset_count,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ethtool_op_set_tso,
};
void stmmac_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index cc973fc..e15c4a0 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -116,9 +116,6 @@
module_param(tc, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(tc, "DMA threshold control value");
-#define RX_NO_COALESCE 1 /* Always interrupt on completion */
-#define TX_NO_COALESCE -1 /* No moderation by default */
-
/* Pay attention to tune this parameter; take care of both
* hardware capability and network stabitily/performance impact.
* Many tests showed that ~4ms latency seems to be good enough. */
@@ -139,7 +136,6 @@
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
-static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
/**
* stmmac_verify_args - verify the driver parameters.
@@ -831,6 +827,7 @@
pr_info("stmmac: Rx Checksum Offload Engine supported\n");
if (priv->plat->tx_coe)
pr_info("\tTX Checksum insertion supported\n");
+ netdev_update_features(dev);
/* Initialise the MMC (if present) to disable all interrupts. */
writel(0xffffffff, priv->ioaddr + MMC_HIGH_INTR_MASK);
@@ -934,46 +931,6 @@
return 0;
}
-/*
- * To perform emulated hardware segmentation on skb.
- */
-static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
-{
- struct sk_buff *segs, *curr_skb;
- int gso_segs = skb_shinfo(skb)->gso_segs;
-
- /* Estimate the number of fragments in the worst case */
- if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
- netif_stop_queue(priv->dev);
- TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
- __func__);
- if (stmmac_tx_avail(priv) < gso_segs)
- return NETDEV_TX_BUSY;
-
- netif_wake_queue(priv->dev);
- }
- TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
- skb, skb->len);
-
- segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
- if (IS_ERR(segs))
- goto sw_tso_end;
-
- do {
- curr_skb = segs;
- segs = segs->next;
- TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
- "*next %p\n", curr_skb->len, curr_skb, segs);
- curr_skb->next = NULL;
- stmmac_xmit(curr_skb, priv->dev);
- } while (segs);
-
-sw_tso_end:
- dev_kfree_skb(skb);
-
- return NETDEV_TX_OK;
-}
-
static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
struct net_device *dev,
int csum_insertion)
@@ -1051,16 +1008,7 @@
!skb_is_gso(skb) ? "isn't" : "is");
#endif
- if (unlikely(skb_is_gso(skb)))
- return stmmac_sw_tso(priv, skb);
-
- if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
- if (unlikely((!priv->plat->tx_coe) ||
- (priv->no_csum_insertion)))
- skb_checksum_help(skb);
- else
- csum_insertion = 1;
- }
+ csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL);
desc = priv->dma_tx + entry;
first = desc;
@@ -1380,18 +1328,29 @@
return -EINVAL;
}
+ dev->mtu = new_mtu;
+ netdev_update_features(dev);
+
+ return 0;
+}
+
+static u32 stmmac_fix_features(struct net_device *dev, u32 features)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!priv->rx_coe)
+ features &= ~NETIF_F_RXCSUM;
+ if (!priv->plat->tx_coe)
+ features &= ~NETIF_F_ALL_CSUM;
+
/* Some GMAC devices have a bugged Jumbo frame support that
* needs to have the Tx COE disabled for oversized frames
* (due to limited buffer sizes). In this case we disable
* the TX csum insertionin the TDES and not use SF. */
- if ((priv->plat->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
- priv->no_csum_insertion = 1;
- else
- priv->no_csum_insertion = 0;
+ if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
+ features &= ~NETIF_F_ALL_CSUM;
- dev->mtu = new_mtu;
-
- return 0;
+ return features;
}
static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
@@ -1471,6 +1430,7 @@
.ndo_start_xmit = stmmac_xmit,
.ndo_stop = stmmac_release,
.ndo_change_mtu = stmmac_change_mtu,
+ .ndo_fix_features = stmmac_fix_features,
.ndo_set_multicast_list = stmmac_multicast_list,
.ndo_tx_timeout = stmmac_tx_timeout,
.ndo_do_ioctl = stmmac_ioctl,
@@ -1501,8 +1461,8 @@
dev->netdev_ops = &stmmac_netdev_ops;
stmmac_set_ethtool_ops(dev);
- dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA |
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ dev->features |= dev->hw_features | NETIF_F_HIGHDMA;
dev->watchdog_timeo = msecs_to_jiffies(watchdog);
#ifdef STMMAC_VLAN_TAG_USED
/* Both mac100 and gmac support receive VLAN tag detection */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index d3be735..ab59300 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1294,7 +1294,7 @@
autoneg = 1;
} else {
autoneg = 0;
- speed = ep->speed;
+ speed = ethtool_cmd_speed(ep);
duplex = ep->duplex;
}
@@ -2642,7 +2642,7 @@
/* Return current PHY settings */
spin_lock_irq(&gp->lock);
cmd->autoneg = gp->want_autoneg;
- cmd->speed = gp->phy_mii.speed;
+ ethtool_cmd_speed_set(cmd, gp->phy_mii.speed);
cmd->duplex = gp->phy_mii.duplex;
cmd->advertising = gp->phy_mii.advertising;
@@ -2659,7 +2659,7 @@
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg);
cmd->advertising = cmd->supported;
- cmd->speed = 0;
+ ethtool_cmd_speed_set(cmd, 0);
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
@@ -2673,7 +2673,7 @@
cmd->advertising = cmd->supported;
cmd->transceiver = XCVR_INTERNAL;
if (gp->lstate == link_up)
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
cmd->duplex = DUPLEX_FULL;
cmd->autoneg = 1;
}
@@ -2686,6 +2686,7 @@
static int gem_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct gem *gp = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
/* Verify the settings we care about. */
if (cmd->autoneg != AUTONEG_ENABLE &&
@@ -2697,9 +2698,9 @@
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE &&
- ((cmd->speed != SPEED_1000 &&
- cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10) ||
+ ((speed != SPEED_1000 &&
+ speed != SPEED_100 &&
+ speed != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)))
return -EINVAL;
@@ -3146,7 +3147,8 @@
gp->phy_mii.def ? gp->phy_mii.def->name : "no");
/* GEM can do it all... */
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_LLTX;
+ dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->features |= dev->hw_features | NETIF_F_RXCSUM | NETIF_F_LLTX;
if (pci_using_dac)
dev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index eb4f59f..30aad54 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1383,7 +1383,7 @@
if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) {
hp->sw_bmcr = BMCR_SPEED100;
} else {
- if (ep->speed == SPEED_100)
+ if (ethtool_cmd_speed(ep) == SPEED_100)
hp->sw_bmcr = BMCR_SPEED100;
else
hp->sw_bmcr = 0;
@@ -2401,6 +2401,7 @@
static int hme_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct happy_meal *hp = netdev_priv(dev);
+ u32 speed;
cmd->supported =
(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
@@ -2420,10 +2421,9 @@
if (hp->sw_bmcr & BMCR_ANENABLE) {
cmd->autoneg = AUTONEG_ENABLE;
- cmd->speed =
- (hp->sw_lpa & (LPA_100HALF | LPA_100FULL)) ?
- SPEED_100 : SPEED_10;
- if (cmd->speed == SPEED_100)
+ speed = ((hp->sw_lpa & (LPA_100HALF | LPA_100FULL)) ?
+ SPEED_100 : SPEED_10);
+ if (speed == SPEED_100)
cmd->duplex =
(hp->sw_lpa & (LPA_100FULL)) ?
DUPLEX_FULL : DUPLEX_HALF;
@@ -2433,13 +2433,12 @@
DUPLEX_FULL : DUPLEX_HALF;
} else {
cmd->autoneg = AUTONEG_DISABLE;
- cmd->speed =
- (hp->sw_bmcr & BMCR_SPEED100) ?
- SPEED_100 : SPEED_10;
+ speed = (hp->sw_bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
cmd->duplex =
(hp->sw_bmcr & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
}
+ ethtool_cmd_speed_set(cmd, speed);
return 0;
}
@@ -2452,8 +2451,8 @@
cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE &&
- ((cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10) ||
+ ((ethtool_cmd_speed(cmd) != SPEED_100 &&
+ ethtool_cmd_speed(cmd) != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)))
return -EINVAL;
@@ -2788,7 +2787,8 @@
dev->ethtool_ops = &hme_ethtool_ops;
/* Happy Meal can do it all... */
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->features |= dev->hw_features | NETIF_F_RXCSUM;
dev->irq = op->archdata.irqs[0];
@@ -3113,7 +3113,8 @@
dev->dma = 0;
/* Happy Meal can do it all... */
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->features |= dev->hw_features | NETIF_F_RXCSUM;
#if defined(CONFIG_SBUS) && defined(CONFIG_PCI)
/* Hook up PCI register/descriptor accessors. */
@@ -3237,15 +3238,18 @@
#endif
#ifdef CONFIG_SBUS
+static const struct of_device_id hme_sbus_match[];
static int __devinit hme_sbus_probe(struct platform_device *op)
{
+ const struct of_device_id *match;
struct device_node *dp = op->dev.of_node;
const char *model = of_get_property(dp, "model", NULL);
int is_qfe;
- if (!op->dev.of_match)
+ match = of_match_device(hme_sbus_match, &op->dev);
+ if (!match)
return -EINVAL;
- is_qfe = (op->dev.of_match->data != NULL);
+ is_qfe = (match->data != NULL);
if (!is_qfe && model && !strcmp(model, "SUNW,sbus-qfe"))
is_qfe = 1;
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 8564ec5..80fbee0 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -2017,9 +2017,11 @@
ndev->irq = pdev->irq;
ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO
| NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER
+ NETIF_F_HW_VLAN_FILTER | NETIF_F_RXCSUM
/*| NETIF_F_FRAGLIST */
;
+ ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_HW_VLAN_TX;
if (pci_using_dac)
ndev->features |= NETIF_F_HIGHDMA;
@@ -2149,7 +2151,7 @@
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
- ecmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
ecmd->duplex = DUPLEX_FULL;
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL; /* what does it mean? */
@@ -2188,24 +2190,6 @@
}
/*
- * bdx_get_rx_csum - report whether receive checksums are turned on or off
- * @netdev
- */
-static u32 bdx_get_rx_csum(struct net_device *netdev)
-{
- return 1; /* always on */
-}
-
-/*
- * bdx_get_tx_csum - report whether transmit checksums are turned on or off
- * @netdev
- */
-static u32 bdx_get_tx_csum(struct net_device *netdev)
-{
- return (netdev->features & NETIF_F_IP_CSUM) != 0;
-}
-
-/*
* bdx_get_coalesce - get interrupt coalescing parameters
* @netdev
* @ecoal
@@ -2424,10 +2408,6 @@
.set_coalesce = bdx_set_coalesce,
.get_ringparam = bdx_get_ringparam,
.set_ringparam = bdx_set_ringparam,
- .get_rx_csum = bdx_get_rx_csum,
- .get_tx_csum = bdx_get_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .get_tso = ethtool_op_get_tso,
.get_strings = bdx_get_strings,
.get_sset_count = bdx_get_sset_count,
.get_ethtool_stats = bdx_get_ethtool_stats,
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b8c5f35..db19332 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -62,12 +62,36 @@
#include "tg3.h"
+/* Functions & macros to verify TG3_FLAGS types */
+
+static inline int _tg3_flag(enum TG3_FLAGS flag, unsigned long *bits)
+{
+ return test_bit(flag, bits);
+}
+
+static inline void _tg3_flag_set(enum TG3_FLAGS flag, unsigned long *bits)
+{
+ set_bit(flag, bits);
+}
+
+static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits)
+{
+ clear_bit(flag, bits);
+}
+
+#define tg3_flag(tp, flag) \
+ _tg3_flag(TG3_FLAG_##flag, (tp)->tg3_flags)
+#define tg3_flag_set(tp, flag) \
+ _tg3_flag_set(TG3_FLAG_##flag, (tp)->tg3_flags)
+#define tg3_flag_clear(tp, flag) \
+ _tg3_flag_clear(TG3_FLAG_##flag, (tp)->tg3_flags)
+
#define DRV_MODULE_NAME "tg3"
#define TG3_MAJ_NUM 3
-#define TG3_MIN_NUM 117
+#define TG3_MIN_NUM 119
#define DRV_MODULE_VERSION \
__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE "January 25, 2011"
+#define DRV_MODULE_RELDATE "May 18, 2011"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -85,26 +109,25 @@
/* length of time before we decide the hardware is borked,
* and dev->tx_timeout() should be called to fix the problem
*/
+
#define TG3_TX_TIMEOUT (5 * HZ)
/* hardware minimum and maximum for a single frame's data payload */
#define TG3_MIN_MTU 60
#define TG3_MAX_MTU(tp) \
- ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) ? 9000 : 1500)
+ (tg3_flag(tp, JUMBO_CAPABLE) ? 9000 : 1500)
/* These numbers seem to be hard coded in the NIC firmware somehow.
* You can't change the ring sizes, but you can change where you place
* them in the NIC onboard memory.
*/
#define TG3_RX_STD_RING_SIZE(tp) \
- ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || \
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) ? \
- RX_STD_MAX_SIZE_5717 : 512)
+ (tg3_flag(tp, LRG_PROD_RING_CAP) ? \
+ TG3_RX_STD_MAX_SIZE_5717 : TG3_RX_STD_MAX_SIZE_5700)
#define TG3_DEF_RX_RING_PENDING 200
#define TG3_RX_JMB_RING_SIZE(tp) \
- ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || \
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) ? \
- 1024 : 256)
+ (tg3_flag(tp, LRG_PROD_RING_CAP) ? \
+ TG3_RX_JMB_MAX_SIZE_5717 : TG3_RX_JMB_MAX_SIZE_5700)
#define TG3_DEF_RX_JUMBO_RING_PENDING 100
#define TG3_RSS_INDIR_TBL_SIZE 128
@@ -167,11 +190,6 @@
#define TG3_RAW_IP_ALIGN 2
-/* number of ETHTOOL_GSTATS u64's */
-#define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64))
-
-#define TG3_NUM_TEST 6
-
#define TG3_FW_UPDATE_TIMEOUT_SEC 5
#define FIRMWARE_TG3 "tigon/tg3.bin"
@@ -266,6 +284,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57791)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57795)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)},
{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
@@ -280,7 +299,7 @@
static const struct {
const char string[ETH_GSTRING_LEN];
-} ethtool_stats_keys[TG3_NUM_STATS] = {
+} ethtool_stats_keys[] = {
{ "rx_octets" },
{ "rx_fragments" },
{ "rx_ucast_packets" },
@@ -356,12 +375,17 @@
{ "ring_status_update" },
{ "nic_irqs" },
{ "nic_avoided_irqs" },
- { "nic_tx_threshold_hit" }
+ { "nic_tx_threshold_hit" },
+
+ { "mbuf_lwm_thresh_hit" },
};
+#define TG3_NUM_STATS ARRAY_SIZE(ethtool_stats_keys)
+
+
static const struct {
const char string[ETH_GSTRING_LEN];
-} ethtool_test_keys[TG3_NUM_TEST] = {
+} ethtool_test_keys[] = {
{ "nvram test (online) " },
{ "link test (online) " },
{ "register test (offline)" },
@@ -370,6 +394,9 @@
{ "interrupt test (offline)" },
};
+#define TG3_NUM_TEST ARRAY_SIZE(ethtool_test_keys)
+
+
static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
{
writel(val, tp->regs + off);
@@ -467,8 +494,7 @@
*/
static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait)
{
- if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) ||
- (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ if (tg3_flag(tp, PCIX_TARGET_HWBUG) || tg3_flag(tp, ICH_WORKAROUND))
/* Non-posted methods */
tp->write32(tp, off, val);
else {
@@ -488,8 +514,7 @@
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
tp->read32_mbox(tp, off);
}
@@ -497,9 +522,9 @@
{
void __iomem *mbox = tp->regs + off;
writel(val, mbox);
- if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
+ if (tg3_flag(tp, TXD_MBOX_HWBUG))
writel(val, mbox);
- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+ if (tg3_flag(tp, MBOX_WRITE_REORDER))
readl(mbox);
}
@@ -528,12 +553,12 @@
{
unsigned long flags;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) &&
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
(off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC))
return;
spin_lock_irqsave(&tp->indirect_lock, flags);
- if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) {
+ if (tg3_flag(tp, SRAM_USE_CONFIG)) {
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
@@ -553,14 +578,14 @@
{
unsigned long flags;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) &&
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
(off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) {
*val = 0;
return;
}
spin_lock_irqsave(&tp->indirect_lock, flags);
- if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) {
+ if (tg3_flag(tp, SRAM_USE_CONFIG)) {
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
@@ -597,7 +622,7 @@
int ret = 0;
u32 status, req, gnt;
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+ if (!tg3_flag(tp, ENABLE_APE))
return 0;
switch (locknum) {
@@ -643,7 +668,7 @@
{
u32 gnt;
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+ if (!tg3_flag(tp, ENABLE_APE))
return;
switch (locknum) {
@@ -687,14 +712,14 @@
struct tg3_napi *tnapi = &tp->napi[i];
tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
- if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
+ if (tg3_flag(tp, 1SHOT_MSI))
tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
tp->coal_now |= tnapi->coal_now;
}
/* Force an initial interrupt */
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
+ if (!tg3_flag(tp, TAGGED_STATUS) &&
(tp->napi[0].hw_status->status & SD_STATUS_UPDATED))
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
else
@@ -710,9 +735,7 @@
unsigned int work_exists = 0;
/* check for phy events */
- if (!(tp->tg3_flags &
- (TG3_FLAG_USE_LINKCHG_REG |
- TG3_FLAG_POLL_SERDES))) {
+ if (!(tg3_flag(tp, USE_LINKCHG_REG) || tg3_flag(tp, POLL_SERDES))) {
if (sblk->status & SD_STATUS_LINK_CHG)
work_exists = 1;
}
@@ -740,8 +763,7 @@
* The last_tag we write above tells the chip which piece of
* work we've completed.
*/
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
- tg3_has_work(tnapi))
+ if (!tg3_flag(tp, TAGGED_STATUS) && tg3_has_work(tnapi))
tw32(HOSTCC_MODE, tp->coalesce_mode |
HOSTCC_MODE_ENABLE | tnapi->coal_now);
}
@@ -751,8 +773,7 @@
u32 clock_ctrl;
u32 orig_clock_ctrl;
- if ((tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
+ if (tg3_flag(tp, CPMU_PRESENT) || tg3_flag(tp, 5780_CLASS))
return;
clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
@@ -763,7 +784,7 @@
0x1f);
tp->pci_clock_ctrl = clock_ctrl;
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ if (tg3_flag(tp, 5705_PLUS)) {
if (orig_clock_ctrl & CLOCK_CTRL_625_CORE) {
tw32_wait_f(TG3PCI_CLOCK_CTRL,
clock_ctrl | CLOCK_CTRL_625_CORE, 40);
@@ -880,6 +901,104 @@
return ret;
}
+static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
+{
+ int err;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
+ if (err)
+ goto done;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
+ if (err)
+ goto done;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
+ MII_TG3_MMD_CTRL_DATA_NOINC | devad);
+ if (err)
+ goto done;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, val);
+
+done:
+ return err;
+}
+
+static int tg3_phy_cl45_read(struct tg3 *tp, u32 devad, u32 addr, u32 *val)
+{
+ int err;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
+ if (err)
+ goto done;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
+ if (err)
+ goto done;
+
+ err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
+ MII_TG3_MMD_CTRL_DATA_NOINC | devad);
+ if (err)
+ goto done;
+
+ err = tg3_readphy(tp, MII_TG3_MMD_ADDRESS, val);
+
+done:
+ return err;
+}
+
+static int tg3_phydsp_read(struct tg3 *tp, u32 reg, u32 *val)
+{
+ int err;
+
+ err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+ if (!err)
+ err = tg3_readphy(tp, MII_TG3_DSP_RW_PORT, val);
+
+ return err;
+}
+
+static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
+{
+ int err;
+
+ err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+ if (!err)
+ err = tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
+
+ return err;
+}
+
+static int tg3_phy_auxctl_read(struct tg3 *tp, int reg, u32 *val)
+{
+ int err;
+
+ err = tg3_writephy(tp, MII_TG3_AUX_CTRL,
+ (reg << MII_TG3_AUXCTL_MISC_RDSEL_SHIFT) |
+ MII_TG3_AUXCTL_SHDWSEL_MISC);
+ if (!err)
+ err = tg3_readphy(tp, MII_TG3_AUX_CTRL, val);
+
+ return err;
+}
+
+static int tg3_phy_auxctl_write(struct tg3 *tp, int reg, u32 set)
+{
+ if (reg == MII_TG3_AUXCTL_SHDWSEL_MISC)
+ set |= MII_TG3_AUXCTL_MISC_WREN;
+
+ return tg3_writephy(tp, MII_TG3_AUX_CTRL, set | reg);
+}
+
+#define TG3_PHY_AUXCTL_SMDSP_ENABLE(tp) \
+ tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \
+ MII_TG3_AUXCTL_ACTL_SMDSP_ENA | \
+ MII_TG3_AUXCTL_ACTL_TX_6DB)
+
+#define TG3_PHY_AUXCTL_SMDSP_DISABLE(tp) \
+ tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \
+ MII_TG3_AUXCTL_ACTL_TX_6DB);
+
static int tg3_bmcr_reset(struct tg3 *tp)
{
u32 phy_control;
@@ -982,7 +1101,7 @@
return;
}
- if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE))
+ if (!tg3_flag(tp, RGMII_INBAND_DISABLE))
val |= MAC_PHYCFG2_EMODE_MASK_MASK |
MAC_PHYCFG2_FMODE_MASK_MASK |
MAC_PHYCFG2_GMODE_MASK_MASK |
@@ -995,10 +1114,10 @@
val = tr32(MAC_PHYCFG1);
val &= ~(MAC_PHYCFG1_RXCLK_TO_MASK | MAC_PHYCFG1_TXCLK_TO_MASK |
MAC_PHYCFG1_RGMII_EXT_RX_DEC | MAC_PHYCFG1_RGMII_SND_STAT_EN);
- if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)) {
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
+ if (!tg3_flag(tp, RGMII_INBAND_DISABLE)) {
+ if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
val |= MAC_PHYCFG1_RGMII_EXT_RX_DEC;
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
+ if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
val |= MAC_PHYCFG1_RGMII_SND_STAT_EN;
}
val |= MAC_PHYCFG1_RXCLK_TIMEOUT | MAC_PHYCFG1_TXCLK_TIMEOUT |
@@ -1013,13 +1132,13 @@
MAC_RGMII_MODE_TX_ENABLE |
MAC_RGMII_MODE_TX_LOWPWR |
MAC_RGMII_MODE_TX_RESET);
- if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)) {
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
+ if (!tg3_flag(tp, RGMII_INBAND_DISABLE)) {
+ if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
val |= MAC_RGMII_MODE_RX_INT_B |
MAC_RGMII_MODE_RX_QUALITY |
MAC_RGMII_MODE_RX_ACTIVITY |
MAC_RGMII_MODE_RX_ENG_DET;
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
+ if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
val |= MAC_RGMII_MODE_TX_ENABLE |
MAC_RGMII_MODE_TX_LOWPWR |
MAC_RGMII_MODE_TX_RESET;
@@ -1033,7 +1152,7 @@
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
- if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
+ if (tg3_flag(tp, MDIOBUS_INITED) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tg3_mdio_config_5785(tp);
}
@@ -1044,8 +1163,7 @@
u32 reg;
struct phy_device *phydev;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+ if (tg3_flag(tp, 5717_PLUS)) {
u32 is_serdes;
tp->phy_addr = PCI_FUNC(tp->pdev->devfn) + 1;
@@ -1062,8 +1180,7 @@
tg3_mdio_start(tp);
- if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) ||
- (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED))
+ if (!tg3_flag(tp, USE_PHYLIB) || tg3_flag(tp, MDIOBUS_INITED))
return 0;
tp->mdio_bus = mdiobus_alloc();
@@ -1119,11 +1236,11 @@
PHY_BRCM_RX_REFCLK_UNUSED |
PHY_BRCM_DIS_TXCRXC_NOENRGY |
PHY_BRCM_AUTO_PWRDWN_ENABLE;
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)
+ if (tg3_flag(tp, RGMII_INBAND_DISABLE))
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
+ if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
+ if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
/* fallthru */
case PHY_ID_RTL8211C:
@@ -1137,7 +1254,7 @@
break;
}
- tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
+ tg3_flag_set(tp, MDIOBUS_INITED);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tg3_mdio_config_5785(tp);
@@ -1147,59 +1264,13 @@
static void tg3_mdio_fini(struct tg3 *tp)
{
- if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
- tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
+ if (tg3_flag(tp, MDIOBUS_INITED)) {
+ tg3_flag_clear(tp, MDIOBUS_INITED);
mdiobus_unregister(tp->mdio_bus);
mdiobus_free(tp->mdio_bus);
}
}
-static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
-{
- int err;
-
- err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
- if (err)
- goto done;
-
- err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
- if (err)
- goto done;
-
- err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
- MII_TG3_MMD_CTRL_DATA_NOINC | devad);
- if (err)
- goto done;
-
- err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, val);
-
-done:
- return err;
-}
-
-static int tg3_phy_cl45_read(struct tg3 *tp, u32 devad, u32 addr, u32 *val)
-{
- int err;
-
- err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
- if (err)
- goto done;
-
- err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
- if (err)
- goto done;
-
- err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
- MII_TG3_MMD_CTRL_DATA_NOINC | devad);
- if (err)
- goto done;
-
- err = tg3_readphy(tp, MII_TG3_MMD_ADDRESS, val);
-
-done:
- return err;
-}
-
/* tp->lock is held. */
static inline void tg3_generate_fw_event(struct tg3 *tp)
{
@@ -1247,8 +1318,7 @@
u32 reg;
u32 val;
- if (!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
- !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (!tg3_flag(tp, 5780_CLASS) || !tg3_flag(tp, ENABLE_ASF))
return;
tg3_wait_for_event_ack(tp);
@@ -1308,6 +1378,11 @@
"on" : "off",
(tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
"on" : "off");
+
+ if (tp->phy_flags & TG3_PHYFLG_EEE_CAP)
+ netdev_info(tp->dev, "EEE is %s\n",
+ tp->setlpicnt ? "enabled" : "disabled");
+
tg3_ump_link_report(tp);
}
}
@@ -1373,13 +1448,12 @@
u32 old_rx_mode = tp->rx_mode;
u32 old_tx_mode = tp->tx_mode;
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
+ if (tg3_flag(tp, USE_PHYLIB))
autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
else
autoneg = tp->link_config.autoneg;
- if (autoneg == AUTONEG_ENABLE &&
- (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)) {
+ if (autoneg == AUTONEG_ENABLE && tg3_flag(tp, PAUSE_AUTONEG)) {
if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES)
flowctrl = tg3_resolve_flowctrl_1000X(lcladv, rmtadv);
else
@@ -1576,28 +1650,6 @@
}
}
-static int tg3_phydsp_read(struct tg3 *tp, u32 reg, u32 *val)
-{
- int err;
-
- err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
- if (!err)
- err = tg3_readphy(tp, MII_TG3_DSP_RW_PORT, val);
-
- return err;
-}
-
-static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
-{
- int err;
-
- err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
- if (!err)
- err = tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
-
- return err;
-}
-
static void tg3_phy_fet_toggle_apd(struct tg3 *tp, bool enable)
{
u32 phytest;
@@ -1622,9 +1674,8 @@
{
u32 reg;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
- ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) &&
+ if (!tg3_flag(tp, 5705_PLUS) ||
+ (tg3_flag(tp, 5717_PLUS) &&
(tp->phy_flags & TG3_PHYFLG_MII_SERDES)))
return;
@@ -1658,7 +1709,7 @@
{
u32 phy;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+ if (!tg3_flag(tp, 5705_PLUS) ||
(tp->phy_flags & TG3_PHYFLG_ANY_SERDES))
return;
@@ -1680,31 +1731,33 @@
tg3_writephy(tp, MII_TG3_FET_TEST, ephy);
}
} else {
- phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
- MII_TG3_AUXCTL_SHDWSEL_MISC;
- if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
- !tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
+ int ret;
+
+ ret = tg3_phy_auxctl_read(tp,
+ MII_TG3_AUXCTL_SHDWSEL_MISC, &phy);
+ if (!ret) {
if (enable)
phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
else
phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
- phy |= MII_TG3_AUXCTL_MISC_WREN;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+ tg3_phy_auxctl_write(tp,
+ MII_TG3_AUXCTL_SHDWSEL_MISC, phy);
}
}
}
static void tg3_phy_set_wirespeed(struct tg3 *tp)
{
+ int ret;
u32 val;
if (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED)
return;
- if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007) &&
- !tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
- tg3_writephy(tp, MII_TG3_AUX_CTRL,
- (val | (1 << 15) | (1 << 4)));
+ ret = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_MISC, &val);
+ if (!ret)
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_MISC,
+ val | MII_TG3_AUXCTL_MISC_WIRESPD_EN);
}
static void tg3_phy_apply_otp(struct tg3 *tp)
@@ -1716,11 +1769,8 @@
otp = tp->phy_otp;
- /* Enable SM_DSP clock and tx 6dB coding. */
- phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
- MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
- MII_TG3_AUXCTL_ACTL_TX_6DB;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+ if (TG3_PHY_AUXCTL_SMDSP_ENABLE(tp))
+ return;
phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT);
phy |= MII_TG3_DSP_TAP1_AGCTGT_DFLT;
@@ -1744,10 +1794,7 @@
((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT);
tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy);
- /* Turn off SM_DSP clock. */
- phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
- MII_TG3_AUXCTL_ACTL_TX_6DB;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+ TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
}
static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
@@ -1776,29 +1823,9 @@
tg3_phy_cl45_read(tp, MDIO_MMD_AN,
TG3_CL45_D7_EEERES_STAT, &val);
- switch (val) {
- case TG3_CL45_D7_EEERES_STAT_LP_1000T:
- switch (GET_ASIC_REV(tp->pci_chip_rev_id)) {
- case ASIC_REV_5717:
- case ASIC_REV_5719:
- case ASIC_REV_57765:
- /* Enable SM_DSP clock and tx 6dB coding. */
- val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
- MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
- MII_TG3_AUXCTL_ACTL_TX_6DB;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
-
- tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0000);
-
- /* Turn off SM_DSP clock. */
- val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
- MII_TG3_AUXCTL_ACTL_TX_6DB;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
- }
- /* Fallthrough */
- case TG3_CL45_D7_EEERES_STAT_LP_100TX:
+ if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
+ val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
tp->setlpicnt = 2;
- }
}
if (!tp->setlpicnt) {
@@ -1807,6 +1834,23 @@
}
}
+static void tg3_phy_eee_enable(struct tg3 *tp)
+{
+ u32 val;
+
+ if (tp->link_config.active_speed == SPEED_1000 &&
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) &&
+ !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
+ tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0003);
+ TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+ }
+
+ val = tr32(TG3_CPMU_EEE_MODE);
+ tw32(TG3_CPMU_EEE_MODE, val | TG3_CPMU_EEEMD_LPI_ENABLE);
+}
+
static int tg3_wait_macro_done(struct tg3 *tp)
{
int limit = 100;
@@ -1945,8 +1989,9 @@
(MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER));
- /* Enable SM_DSP_CLOCK and 6dB. */
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+ err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp);
+ if (err)
+ return err;
/* Block the PHY control access. */
tg3_phydsp_write(tp, 0x8005, 0x0800);
@@ -1965,13 +2010,7 @@
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200);
tg3_writephy(tp, MII_TG3_DSP_CONTROL, 0x0000);
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
- /* Set Extended packet length bit for jumbo frames */
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4400);
- } else {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
- }
+ TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
@@ -2047,8 +2086,7 @@
}
}
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) &&
+ if (tg3_flag(tp, 5717_PLUS) &&
(tp->phy_flags & TG3_PHYFLG_MII_SERDES))
return 0;
@@ -2060,49 +2098,57 @@
tg3_phy_toggle_apd(tp, false);
out:
- if (tp->phy_flags & TG3_PHYFLG_ADC_BUG) {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+ if ((tp->phy_flags & TG3_PHYFLG_ADC_BUG) &&
+ !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
tg3_phydsp_write(tp, 0x201f, 0x2aaa);
tg3_phydsp_write(tp, 0x000a, 0x0323);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+ TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
}
+
if (tp->phy_flags & TG3_PHYFLG_5704_A0_BUG) {
tg3_writephy(tp, MII_TG3_MISC_SHDW, 0x8d68);
tg3_writephy(tp, MII_TG3_MISC_SHDW, 0x8d68);
}
+
if (tp->phy_flags & TG3_PHYFLG_BER_BUG) {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
- tg3_phydsp_write(tp, 0x000a, 0x310b);
- tg3_phydsp_write(tp, 0x201f, 0x9506);
- tg3_phydsp_write(tp, 0x401f, 0x14e2);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+ if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
+ tg3_phydsp_write(tp, 0x000a, 0x310b);
+ tg3_phydsp_write(tp, 0x201f, 0x9506);
+ tg3_phydsp_write(tp, 0x401f, 0x14e2);
+ TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+ }
} else if (tp->phy_flags & TG3_PHYFLG_JITTER_BUG) {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
- tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
- if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) {
- tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
- tg3_writephy(tp, MII_TG3_TEST1,
- MII_TG3_TEST1_TRIM_EN | 0x4);
- } else
- tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+ if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
+ tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
+ if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) {
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
+ tg3_writephy(tp, MII_TG3_TEST1,
+ MII_TG3_TEST1_TRIM_EN | 0x4);
+ } else
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
+
+ TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+ }
}
+
/* Set Extended packet length bit (bit 14) on all chips that */
/* support jumbo frames */
if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
/* Cannot do read-modify-write on 5401 */
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
- } else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, 0x4c20);
+ } else if (tg3_flag(tp, JUMBO_CAPABLE)) {
/* Set bit 14 with read-modify-write to preserve other bits */
- if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007) &&
- !tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val | 0x4000);
+ err = tg3_phy_auxctl_read(tp,
+ MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val);
+ if (!err)
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL,
+ val | MII_TG3_AUXCTL_ACTL_EXTPKTLEN);
}
/* Set phy register 0x10 bit 0 to high fifo elasticity to support
* jumbo frames transmission.
*/
- if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+ if (tg3_flag(tp, JUMBO_CAPABLE)) {
if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &val))
tg3_writephy(tp, MII_TG3_EXT_CTRL,
val | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
@@ -2123,14 +2169,15 @@
bool need_vaux = false;
/* The GPIOs do something completely different on 57765. */
- if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0 ||
+ if (!tg3_flag(tp, IS_NIC) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
return;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) &&
tp->pdev_peer != tp->pdev) {
struct net_device *dev_peer;
@@ -2140,17 +2187,16 @@
if (dev_peer) {
struct tg3 *tp_peer = netdev_priv(dev_peer);
- if (tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE)
+ if (tg3_flag(tp_peer, INIT_COMPLETE))
return;
- if ((tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) ||
- (tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (tg3_flag(tp_peer, WOL_ENABLE) ||
+ tg3_flag(tp_peer, ENABLE_ASF))
need_vaux = true;
}
}
- if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) ||
- (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (tg3_flag(tp, WOL_ENABLE) || tg3_flag(tp, ENABLE_ASF))
need_vaux = true;
if (need_vaux) {
@@ -2304,11 +2350,10 @@
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
- tg3_writephy(tp, MII_TG3_AUX_CTRL,
- MII_TG3_AUXCTL_SHDWSEL_PWRCTL |
- MII_TG3_AUXCTL_PCTL_100TX_LPWR |
- MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
- MII_TG3_AUXCTL_PCTL_VREG_11V);
+ val = MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+ MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
+ MII_TG3_AUXCTL_PCTL_VREG_11V;
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_PWRCTL, val);
}
/* The PHY should not be powered down on some chips because
@@ -2334,7 +2379,7 @@
/* tp->lock is held. */
static int tg3_nvram_lock(struct tg3 *tp)
{
- if (tp->tg3_flags & TG3_FLAG_NVRAM) {
+ if (tg3_flag(tp, NVRAM)) {
int i;
if (tp->nvram_lock_cnt == 0) {
@@ -2357,7 +2402,7 @@
/* tp->lock is held. */
static void tg3_nvram_unlock(struct tg3 *tp)
{
- if (tp->tg3_flags & TG3_FLAG_NVRAM) {
+ if (tg3_flag(tp, NVRAM)) {
if (tp->nvram_lock_cnt > 0)
tp->nvram_lock_cnt--;
if (tp->nvram_lock_cnt == 0)
@@ -2368,8 +2413,7 @@
/* tp->lock is held. */
static void tg3_enable_nvram_access(struct tg3 *tp)
{
- if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
- !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM)) {
+ if (tg3_flag(tp, 5750_PLUS) && !tg3_flag(tp, PROTECTED_NVRAM)) {
u32 nvaccess = tr32(NVRAM_ACCESS);
tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
@@ -2379,8 +2423,7 @@
/* tp->lock is held. */
static void tg3_disable_nvram_access(struct tg3 *tp)
{
- if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
- !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM)) {
+ if (tg3_flag(tp, 5750_PLUS) && !tg3_flag(tp, PROTECTED_NVRAM)) {
u32 nvaccess = tr32(NVRAM_ACCESS);
tw32(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
@@ -2450,10 +2493,10 @@
static u32 tg3_nvram_phys_addr(struct tg3 *tp, u32 addr)
{
- if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
- (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
- (tp->tg3_flags2 & TG3_FLG2_FLASH) &&
- !(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM_ADDR_TRANS) &&
+ if (tg3_flag(tp, NVRAM) &&
+ tg3_flag(tp, NVRAM_BUFFERED) &&
+ tg3_flag(tp, FLASH) &&
+ !tg3_flag(tp, NO_NVRAM_ADDR_TRANS) &&
(tp->nvram_jedecnum == JEDEC_ATMEL))
addr = ((addr / tp->nvram_pagesize) <<
@@ -2465,10 +2508,10 @@
static u32 tg3_nvram_logical_addr(struct tg3 *tp, u32 addr)
{
- if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
- (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
- (tp->tg3_flags2 & TG3_FLG2_FLASH) &&
- !(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM_ADDR_TRANS) &&
+ if (tg3_flag(tp, NVRAM) &&
+ tg3_flag(tp, NVRAM_BUFFERED) &&
+ tg3_flag(tp, FLASH) &&
+ !tg3_flag(tp, NO_NVRAM_ADDR_TRANS) &&
(tp->nvram_jedecnum == JEDEC_ATMEL))
addr = ((addr >> ATMEL_AT45DB0X1B_PAGE_POS) *
@@ -2488,7 +2531,7 @@
{
int ret;
- if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
+ if (!tg3_flag(tp, NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
offset = tg3_nvram_phys_addr(tp, offset);
@@ -2580,7 +2623,7 @@
pci_set_power_state(tp->pdev, PCI_D0);
/* Switch out of Vaux if it is a NIC */
- if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+ if (tg3_flag(tp, IS_NIC))
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
return 0;
@@ -2594,7 +2637,7 @@
tg3_enable_register_access(tp);
/* Restore the CLKREQ setting. */
- if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
+ if (tg3_flag(tp, CLKREQ_BUG)) {
u16 lnkctl;
pci_read_config_word(tp->pdev,
@@ -2611,9 +2654,9 @@
misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
device_should_wake = device_may_wakeup(&tp->pdev->dev) &&
- (tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+ tg3_flag(tp, WOL_ENABLE);
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
do_low_power = false;
if ((tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) &&
!(tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
@@ -2634,9 +2677,8 @@
ADVERTISED_Autoneg |
ADVERTISED_10baseT_Half;
- if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- device_should_wake) {
- if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
+ if (tg3_flag(tp, ENABLE_ASF) || device_should_wake) {
+ if (tg3_flag(tp, WOL_SPEED_100MB))
advertising |=
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
@@ -2681,7 +2723,7 @@
val = tr32(GRC_VCPU_EXT_CTRL);
tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_DISABLE_WOL);
- } else if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+ } else if (!tg3_flag(tp, ENABLE_ASF)) {
int i;
u32 val;
@@ -2692,7 +2734,7 @@
msleep(1);
}
}
- if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+ if (tg3_flag(tp, WOL_CAP))
tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE |
WOL_DRV_STATE_SHUTDOWN |
WOL_DRV_WOL |
@@ -2702,8 +2744,13 @@
u32 mac_mode;
if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
- if (do_low_power) {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
+ if (do_low_power &&
+ !(tp->phy_flags & TG3_PHYFLG_IS_FET)) {
+ tg3_phy_auxctl_write(tp,
+ MII_TG3_AUXCTL_SHDWSEL_PWRCTL,
+ MII_TG3_AUXCTL_PCTL_WOL_EN |
+ MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+ MII_TG3_AUXCTL_PCTL_CL_AB_TXDAC);
udelay(40);
}
@@ -2715,8 +2762,7 @@
mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY;
if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
ASIC_REV_5700) {
- u32 speed = (tp->tg3_flags &
- TG3_FLAG_WOL_SPEED_100MB) ?
+ u32 speed = tg3_flag(tp, WOL_SPEED_100MB) ?
SPEED_100 : SPEED_10;
if (tg3_5700_link_polarity(tp, speed))
mac_mode |= MAC_MODE_LINK_POLARITY;
@@ -2727,17 +2773,15 @@
mac_mode = MAC_MODE_PORT_MODE_TBI;
}
- if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
+ if (!tg3_flag(tp, 5750_PLUS))
tw32(MAC_LED_CTRL, tp->led_ctrl);
mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
- if (((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) &&
- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)))
+ if ((tg3_flag(tp, 5705_PLUS) && !tg3_flag(tp, 5780_CLASS)) &&
+ (tg3_flag(tp, ENABLE_ASF) || tg3_flag(tp, ENABLE_APE)))
mac_mode |= MAC_MODE_KEEP_FRAME_IN_WOL;
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
mac_mode |= MAC_MODE_APE_TX_EN |
MAC_MODE_APE_RX_EN |
MAC_MODE_TDE_ENABLE;
@@ -2749,7 +2793,7 @@
udelay(10);
}
- if (!(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB) &&
+ if (!tg3_flag(tp, WOL_SPEED_100MB) &&
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
u32 base_val;
@@ -2760,12 +2804,11 @@
tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK |
CLOCK_CTRL_PWRDOWN_PLL133, 40);
- } else if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
- (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)) {
+ } else if (tg3_flag(tp, 5780_CLASS) ||
+ tg3_flag(tp, CPMU_PRESENT) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* do nothing */
- } else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
- (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
+ } else if (!(tg3_flag(tp, 5750_PLUS) && tg3_flag(tp, ENABLE_ASF))) {
u32 newbits1, newbits2;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -2774,7 +2817,7 @@
CLOCK_CTRL_TXCLK_DISABLE |
CLOCK_CTRL_ALTCLK);
newbits2 = newbits1 | CLOCK_CTRL_44MHZ_CORE;
- } else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ } else if (tg3_flag(tp, 5705_PLUS)) {
newbits1 = CLOCK_CTRL_625_CORE;
newbits2 = newbits1 | CLOCK_CTRL_ALTCLK;
} else {
@@ -2788,7 +2831,7 @@
tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2,
40);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
u32 newbits3;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -2805,8 +2848,7 @@
}
}
- if (!(device_should_wake) &&
- !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (!(device_should_wake) && !tg3_flag(tp, ENABLE_ASF))
tg3_power_down_phy(tp, do_low_power);
tg3_frob_aux_power(tp);
@@ -2818,7 +2860,7 @@
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
tw32(0x7d00, val);
- if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+ if (!tg3_flag(tp, ENABLE_ASF)) {
int err;
err = tg3_nvram_lock(tp);
@@ -2837,7 +2879,7 @@
{
tg3_power_down_prepare(tp);
- pci_wake_from_d3(tp->pdev, tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+ pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
pci_set_power_state(tp->pdev, PCI_D3hot);
}
@@ -2888,106 +2930,54 @@
}
}
-static void tg3_phy_copper_begin(struct tg3 *tp)
+static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
{
- u32 new_adv;
- int i;
+ int err = 0;
+ u32 val, new_adv;
- if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
- /* Entering low power mode. Disable gigabit and
- * 100baseT advertisements.
- */
- tg3_writephy(tp, MII_TG3_CTRL, 0);
+ new_adv = ADVERTISE_CSMA;
+ if (advertise & ADVERTISED_10baseT_Half)
+ new_adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ new_adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ new_adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ new_adv |= ADVERTISE_100FULL;
- new_adv = (ADVERTISE_10HALF | ADVERTISE_10FULL |
- ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
- if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
- new_adv |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
+ new_adv |= tg3_advert_flowctrl_1000T(flowctrl);
- tg3_writephy(tp, MII_ADVERTISE, new_adv);
- } else if (tp->link_config.speed == SPEED_INVALID) {
- if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
- tp->link_config.advertising &=
- ~(ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full);
+ err = tg3_writephy(tp, MII_ADVERTISE, new_adv);
+ if (err)
+ goto done;
- new_adv = ADVERTISE_CSMA;
- if (tp->link_config.advertising & ADVERTISED_10baseT_Half)
- new_adv |= ADVERTISE_10HALF;
- if (tp->link_config.advertising & ADVERTISED_10baseT_Full)
- new_adv |= ADVERTISE_10FULL;
- if (tp->link_config.advertising & ADVERTISED_100baseT_Half)
- new_adv |= ADVERTISE_100HALF;
- if (tp->link_config.advertising & ADVERTISED_100baseT_Full)
- new_adv |= ADVERTISE_100FULL;
+ if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
+ goto done;
- new_adv |= tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
+ new_adv = 0;
+ if (advertise & ADVERTISED_1000baseT_Half)
+ new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
+ if (advertise & ADVERTISED_1000baseT_Full)
+ new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
- tg3_writephy(tp, MII_ADVERTISE, new_adv);
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
+ tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
+ new_adv |= (MII_TG3_CTRL_AS_MASTER |
+ MII_TG3_CTRL_ENABLE_AS_MASTER);
- if (tp->link_config.advertising &
- (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
- new_adv = 0;
- if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
- new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
- if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
- new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
- if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY) &&
- (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5701_B0))
- new_adv |= (MII_TG3_CTRL_AS_MASTER |
- MII_TG3_CTRL_ENABLE_AS_MASTER);
- tg3_writephy(tp, MII_TG3_CTRL, new_adv);
- } else {
- tg3_writephy(tp, MII_TG3_CTRL, 0);
- }
- } else {
- new_adv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
- new_adv |= ADVERTISE_CSMA;
+ err = tg3_writephy(tp, MII_TG3_CTRL, new_adv);
+ if (err)
+ goto done;
- /* Asking for a specific link mode. */
- if (tp->link_config.speed == SPEED_1000) {
- tg3_writephy(tp, MII_ADVERTISE, new_adv);
+ if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
+ goto done;
- if (tp->link_config.duplex == DUPLEX_FULL)
- new_adv = MII_TG3_CTRL_ADV_1000_FULL;
- else
- new_adv = MII_TG3_CTRL_ADV_1000_HALF;
- if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
- new_adv |= (MII_TG3_CTRL_AS_MASTER |
- MII_TG3_CTRL_ENABLE_AS_MASTER);
- } else {
- if (tp->link_config.speed == SPEED_100) {
- if (tp->link_config.duplex == DUPLEX_FULL)
- new_adv |= ADVERTISE_100FULL;
- else
- new_adv |= ADVERTISE_100HALF;
- } else {
- if (tp->link_config.duplex == DUPLEX_FULL)
- new_adv |= ADVERTISE_10FULL;
- else
- new_adv |= ADVERTISE_10HALF;
- }
- tg3_writephy(tp, MII_ADVERTISE, new_adv);
+ tw32(TG3_CPMU_EEE_MODE,
+ tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
- new_adv = 0;
- }
-
- tg3_writephy(tp, MII_TG3_CTRL, new_adv);
- }
-
- if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
- u32 val;
-
- tw32(TG3_CPMU_EEE_MODE,
- tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
-
- /* Enable SM_DSP clock and tx 6dB coding. */
- val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
- MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
- MII_TG3_AUXCTL_ACTL_TX_6DB;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+ err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp);
+ if (!err) {
+ u32 err2;
switch (GET_ASIC_REV(tp->pci_chip_rev_id)) {
case ASIC_REV_5717:
@@ -3004,22 +2994,66 @@
}
val = 0;
- if (tp->link_config.autoneg == AUTONEG_ENABLE) {
- /* Advertise 100-BaseTX EEE ability */
- if (tp->link_config.advertising &
- ADVERTISED_100baseT_Full)
- val |= MDIO_AN_EEE_ADV_100TX;
- /* Advertise 1000-BaseT EEE ability */
- if (tp->link_config.advertising &
- ADVERTISED_1000baseT_Full)
- val |= MDIO_AN_EEE_ADV_1000T;
- }
- tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
+ /* Advertise 100-BaseTX EEE ability */
+ if (advertise & ADVERTISED_100baseT_Full)
+ val |= MDIO_AN_EEE_ADV_100TX;
+ /* Advertise 1000-BaseT EEE ability */
+ if (advertise & ADVERTISED_1000baseT_Full)
+ val |= MDIO_AN_EEE_ADV_1000T;
+ err = tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
- /* Turn off SM_DSP clock. */
- val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
- MII_TG3_AUXCTL_ACTL_TX_6DB;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+ err2 = TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+ if (!err)
+ err = err2;
+ }
+
+done:
+ return err;
+}
+
+static void tg3_phy_copper_begin(struct tg3 *tp)
+{
+ u32 new_adv;
+ int i;
+
+ if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
+ new_adv = ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full;
+ if (tg3_flag(tp, WOL_SPEED_100MB))
+ new_adv |= ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full;
+
+ tg3_phy_autoneg_cfg(tp, new_adv,
+ FLOW_CTRL_TX | FLOW_CTRL_RX);
+ } else if (tp->link_config.speed == SPEED_INVALID) {
+ if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
+ tp->link_config.advertising &=
+ ~(ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full);
+
+ tg3_phy_autoneg_cfg(tp, tp->link_config.advertising,
+ tp->link_config.flowctrl);
+ } else {
+ /* Asking for a specific link mode. */
+ if (tp->link_config.speed == SPEED_1000) {
+ if (tp->link_config.duplex == DUPLEX_FULL)
+ new_adv = ADVERTISED_1000baseT_Full;
+ else
+ new_adv = ADVERTISED_1000baseT_Half;
+ } else if (tp->link_config.speed == SPEED_100) {
+ if (tp->link_config.duplex == DUPLEX_FULL)
+ new_adv = ADVERTISED_100baseT_Full;
+ else
+ new_adv = ADVERTISED_100baseT_Half;
+ } else {
+ if (tp->link_config.duplex == DUPLEX_FULL)
+ new_adv = ADVERTISED_10baseT_Full;
+ else
+ new_adv = ADVERTISED_10baseT_Half;
+ }
+
+ tg3_phy_autoneg_cfg(tp, new_adv,
+ tp->link_config.flowctrl);
}
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
@@ -3077,7 +3111,7 @@
/* Turn off tap power management. */
/* Set Extended packet length bit */
- err = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
+ err = tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, 0x4c20);
err |= tg3_phydsp_write(tp, 0x0012, 0x1804);
err |= tg3_phydsp_write(tp, 0x0013, 0x1204);
@@ -3140,7 +3174,7 @@
if (curadv != reqadv)
return 0;
- if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)
+ if (tg3_flag(tp, PAUSE_AUTONEG))
tg3_readphy(tp, MII_LPA, rmtadv);
} else {
/* Reprogram the advertisement register, even if it
@@ -3183,7 +3217,7 @@
udelay(80);
}
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x02);
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_PWRCTL, 0);
/* Some third-party PHYs need to be reset on link going
* down.
@@ -3203,7 +3237,7 @@
if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
tg3_readphy(tp, MII_BMSR, &bmsr);
if (tg3_readphy(tp, MII_BMSR, &bmsr) ||
- !(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
+ !tg3_flag(tp, INIT_COMPLETE))
bmsr = 0;
if (!(bmsr & BMSR_LSTATUS)) {
@@ -3264,11 +3298,13 @@
current_duplex = DUPLEX_INVALID;
if (tp->phy_flags & TG3_PHYFLG_CAPACITIVE_COUPLING) {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4007);
- tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
- if (!(val & (1 << 10))) {
- val |= (1 << 10);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+ err = tg3_phy_auxctl_read(tp,
+ MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
+ &val);
+ if (!err && !(val & (1 << 10))) {
+ tg3_phy_auxctl_write(tp,
+ MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
+ val | (1 << 10));
goto relink;
}
}
@@ -3341,8 +3377,8 @@
tg3_phy_copper_begin(tp);
tg3_readphy(tp, MII_BMSR, &bmsr);
- if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
- (bmsr & BMSR_LSTATUS))
+ if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
+ (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
current_link_up = 1;
}
@@ -3385,7 +3421,7 @@
tg3_phy_eee_adjust(tp, current_link_up);
- if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
+ if (tg3_flag(tp, USE_LINKCHG_REG)) {
/* Polled via timer. */
tw32_f(MAC_EVENT, 0);
} else {
@@ -3396,8 +3432,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 &&
current_link_up == 1 &&
tp->link_config.active_speed == SPEED_1000 &&
- ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ||
- (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED))) {
+ (tg3_flag(tp, PCIX_MODE) || tg3_flag(tp, PCI_HIGH_SPEED))) {
udelay(120);
tw32_f(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED |
@@ -3409,7 +3444,7 @@
}
/* Prevent send BD corruption. */
- if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
+ if (tg3_flag(tp, CLKREQ_BUG)) {
u16 oldlnkctl, newlnkctl;
pci_read_config_word(tp->pdev,
@@ -3804,7 +3839,7 @@
int i;
/* Reset when initting first time or we have a link. */
- if ((tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) &&
+ if (tg3_flag(tp, INIT_COMPLETE) &&
!(mac_status & MAC_STATUS_PCS_SYNCED))
return;
@@ -4065,9 +4100,9 @@
orig_active_speed = tp->link_config.active_speed;
orig_active_duplex = tp->link_config.active_duplex;
- if (!(tp->tg3_flags2 & TG3_FLG2_HW_AUTONEG) &&
+ if (!tg3_flag(tp, HW_AUTONEG) &&
netif_carrier_ok(tp->dev) &&
- (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)) {
+ tg3_flag(tp, INIT_COMPLETE)) {
mac_status = tr32(MAC_STATUS);
mac_status &= (MAC_STATUS_PCS_SYNCED |
MAC_STATUS_SIGNAL_DET |
@@ -4098,7 +4133,7 @@
current_link_up = 0;
mac_status = tr32(MAC_STATUS);
- if (tp->tg3_flags2 & TG3_FLG2_HW_AUTONEG)
+ if (tg3_flag(tp, HW_AUTONEG))
current_link_up = tg3_setup_fiber_hw_autoneg(tp, mac_status);
else
current_link_up = tg3_setup_fiber_by_hand(tp, mac_status);
@@ -4297,7 +4332,7 @@
current_duplex = DUPLEX_FULL;
else
current_duplex = DUPLEX_HALF;
- } else if (!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ } else if (!tg3_flag(tp, 5780_CLASS)) {
/* Link is up via parallel detect */
} else {
current_link_up = 0;
@@ -4394,6 +4429,7 @@
static int tg3_setup_phy(struct tg3 *tp, int force_reset)
{
+ u32 val;
int err;
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
@@ -4404,7 +4440,7 @@
err = tg3_setup_copper_phy(tp, force_reset);
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
- u32 val, scale;
+ u32 scale;
val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
if (val == CPMU_CLCK_STAT_MAC_CLCK_62_5)
@@ -4419,19 +4455,22 @@
tw32(GRC_MISC_CFG, val);
}
+ val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
+ (6 << TX_LENGTHS_IPG_SHIFT);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+ val |= tr32(MAC_TX_LENGTHS) &
+ (TX_LENGTHS_JMB_FRM_LEN_MSK |
+ TX_LENGTHS_CNT_DWN_VAL_MSK);
+
if (tp->link_config.active_speed == SPEED_1000 &&
tp->link_config.active_duplex == DUPLEX_HALF)
- tw32(MAC_TX_LENGTHS,
- ((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
- (6 << TX_LENGTHS_IPG_SHIFT) |
- (0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
+ tw32(MAC_TX_LENGTHS, val |
+ (0xff << TX_LENGTHS_SLOT_TIME_SHIFT));
else
- tw32(MAC_TX_LENGTHS,
- ((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
- (6 << TX_LENGTHS_IPG_SHIFT) |
- (32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
+ tw32(MAC_TX_LENGTHS, val |
+ (32 << TX_LENGTHS_SLOT_TIME_SHIFT));
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
if (netif_carrier_ok(tp->dev)) {
tw32(HOSTCC_STAT_COAL_TICKS,
tp->coal.stats_block_coalesce_usecs);
@@ -4440,8 +4479,8 @@
}
}
- if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND) {
- u32 val = tr32(PCIE_PWR_MGMT_THRESH);
+ if (tg3_flag(tp, ASPM_WORKAROUND)) {
+ val = tr32(PCIE_PWR_MGMT_THRESH);
if (!netif_carrier_ok(tp->dev))
val = (val & ~PCIE_PWR_MGMT_L1_THRESH_MSK) |
tp->pwrmgmt_thresh;
@@ -4458,6 +4497,123 @@
return tp->irq_sync;
}
+static inline void tg3_rd32_loop(struct tg3 *tp, u32 *dst, u32 off, u32 len)
+{
+ int i;
+
+ dst = (u32 *)((u8 *)dst + off);
+ for (i = 0; i < len; i += sizeof(u32))
+ *dst++ = tr32(off + i);
+}
+
+static void tg3_dump_legacy_regs(struct tg3 *tp, u32 *regs)
+{
+ tg3_rd32_loop(tp, regs, TG3PCI_VENDOR, 0xb0);
+ tg3_rd32_loop(tp, regs, MAILBOX_INTERRUPT_0, 0x200);
+ tg3_rd32_loop(tp, regs, MAC_MODE, 0x4f0);
+ tg3_rd32_loop(tp, regs, SNDDATAI_MODE, 0xe0);
+ tg3_rd32_loop(tp, regs, SNDDATAC_MODE, 0x04);
+ tg3_rd32_loop(tp, regs, SNDBDS_MODE, 0x80);
+ tg3_rd32_loop(tp, regs, SNDBDI_MODE, 0x48);
+ tg3_rd32_loop(tp, regs, SNDBDC_MODE, 0x04);
+ tg3_rd32_loop(tp, regs, RCVLPC_MODE, 0x20);
+ tg3_rd32_loop(tp, regs, RCVLPC_SELLST_BASE, 0x15c);
+ tg3_rd32_loop(tp, regs, RCVDBDI_MODE, 0x0c);
+ tg3_rd32_loop(tp, regs, RCVDBDI_JUMBO_BD, 0x3c);
+ tg3_rd32_loop(tp, regs, RCVDBDI_BD_PROD_IDX_0, 0x44);
+ tg3_rd32_loop(tp, regs, RCVDCC_MODE, 0x04);
+ tg3_rd32_loop(tp, regs, RCVBDI_MODE, 0x20);
+ tg3_rd32_loop(tp, regs, RCVCC_MODE, 0x14);
+ tg3_rd32_loop(tp, regs, RCVLSC_MODE, 0x08);
+ tg3_rd32_loop(tp, regs, MBFREE_MODE, 0x08);
+ tg3_rd32_loop(tp, regs, HOSTCC_MODE, 0x100);
+
+ if (tg3_flag(tp, SUPPORT_MSIX))
+ tg3_rd32_loop(tp, regs, HOSTCC_RXCOL_TICKS_VEC1, 0x180);
+
+ tg3_rd32_loop(tp, regs, MEMARB_MODE, 0x10);
+ tg3_rd32_loop(tp, regs, BUFMGR_MODE, 0x58);
+ tg3_rd32_loop(tp, regs, RDMAC_MODE, 0x08);
+ tg3_rd32_loop(tp, regs, WDMAC_MODE, 0x08);
+ tg3_rd32_loop(tp, regs, RX_CPU_MODE, 0x04);
+ tg3_rd32_loop(tp, regs, RX_CPU_STATE, 0x04);
+ tg3_rd32_loop(tp, regs, RX_CPU_PGMCTR, 0x04);
+ tg3_rd32_loop(tp, regs, RX_CPU_HWBKPT, 0x04);
+
+ if (!tg3_flag(tp, 5705_PLUS)) {
+ tg3_rd32_loop(tp, regs, TX_CPU_MODE, 0x04);
+ tg3_rd32_loop(tp, regs, TX_CPU_STATE, 0x04);
+ tg3_rd32_loop(tp, regs, TX_CPU_PGMCTR, 0x04);
+ }
+
+ tg3_rd32_loop(tp, regs, GRCMBOX_INTERRUPT_0, 0x110);
+ tg3_rd32_loop(tp, regs, FTQ_RESET, 0x120);
+ tg3_rd32_loop(tp, regs, MSGINT_MODE, 0x0c);
+ tg3_rd32_loop(tp, regs, DMAC_MODE, 0x04);
+ tg3_rd32_loop(tp, regs, GRC_MODE, 0x4c);
+
+ if (tg3_flag(tp, NVRAM))
+ tg3_rd32_loop(tp, regs, NVRAM_CMD, 0x24);
+}
+
+static void tg3_dump_state(struct tg3 *tp)
+{
+ int i;
+ u32 *regs;
+
+ regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC);
+ if (!regs) {
+ netdev_err(tp->dev, "Failed allocating register dump buffer\n");
+ return;
+ }
+
+ if (tg3_flag(tp, PCI_EXPRESS)) {
+ /* Read up to but not including private PCI registers */
+ for (i = 0; i < TG3_PCIE_TLDLPL_PORT; i += sizeof(u32))
+ regs[i / sizeof(u32)] = tr32(i);
+ } else
+ tg3_dump_legacy_regs(tp, regs);
+
+ for (i = 0; i < TG3_REG_BLK_SIZE / sizeof(u32); i += 4) {
+ if (!regs[i + 0] && !regs[i + 1] &&
+ !regs[i + 2] && !regs[i + 3])
+ continue;
+
+ netdev_err(tp->dev, "0x%08x: 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
+ i * 4,
+ regs[i + 0], regs[i + 1], regs[i + 2], regs[i + 3]);
+ }
+
+ kfree(regs);
+
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+
+ /* SW status block */
+ netdev_err(tp->dev,
+ "%d: Host status block [%08x:%08x:(%04x:%04x:%04x):(%04x:%04x)]\n",
+ i,
+ tnapi->hw_status->status,
+ tnapi->hw_status->status_tag,
+ tnapi->hw_status->rx_jumbo_consumer,
+ tnapi->hw_status->rx_consumer,
+ tnapi->hw_status->rx_mini_consumer,
+ tnapi->hw_status->idx[0].rx_producer,
+ tnapi->hw_status->idx[0].tx_consumer);
+
+ netdev_err(tp->dev,
+ "%d: NAPI info [%08x:%08x:(%04x:%04x:%04x):%04x:(%04x:%04x:%04x:%04x)]\n",
+ i,
+ tnapi->last_tag, tnapi->last_irq_tag,
+ tnapi->tx_prod, tnapi->tx_cons, tnapi->tx_pending,
+ tnapi->rx_rcb_ptr,
+ tnapi->prodring.rx_std_prod_idx,
+ tnapi->prodring.rx_std_cons_idx,
+ tnapi->prodring.rx_jmb_prod_idx,
+ tnapi->prodring.rx_jmb_cons_idx);
+ }
+}
+
/* This is called whenever we suspect that the system chipset is re-
* ordering the sequence of MMIO to the tx send mailbox. The symptom
* is bogus tx completions. We try to recover by setting the
@@ -4466,7 +4622,7 @@
*/
static void tg3_tx_recover(struct tg3 *tp)
{
- BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
+ BUG_ON(tg3_flag(tp, MBOX_WRITE_REORDER) ||
tp->write32_tx_mbox == tg3_write_indirect_mbox);
netdev_warn(tp->dev,
@@ -4476,7 +4632,7 @@
"and include system chipset information.\n");
spin_lock(&tp->lock);
- tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
+ tg3_flag_set(tp, TX_RECOVERY_PENDING);
spin_unlock(&tp->lock);
}
@@ -4500,7 +4656,7 @@
struct netdev_queue *txq;
int index = tnapi - tp->napi;
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+ if (tg3_flag(tp, ENABLE_TSS))
index--;
txq = netdev_get_tx_queue(tp->dev, index);
@@ -4815,7 +4971,7 @@
skb = copy_skb;
}
- if ((tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) &&
+ if ((tp->dev->features & NETIF_F_RXCSUM) &&
(desc->type_flags & RXD_FLAG_TCPUDP_CSUM) &&
(((desc->ip_tcp_csum & RXD_TCPCSUM_MASK)
>> RXD_TCPCSUM_SHIFT) == 0xffff))
@@ -4868,7 +5024,7 @@
tw32_rx_mbox(tnapi->consmbox, sw_idx);
/* Refill RX ring(s). */
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)) {
+ if (!tg3_flag(tp, ENABLE_RSS)) {
if (work_mask & RXD_OPAQUE_RING_STD) {
tpr->rx_std_prod_idx = std_prod_idx &
tp->rx_std_ring_mask;
@@ -4901,16 +5057,14 @@
static void tg3_poll_link(struct tg3 *tp)
{
/* handle link change and other phy events */
- if (!(tp->tg3_flags &
- (TG3_FLAG_USE_LINKCHG_REG |
- TG3_FLAG_POLL_SERDES))) {
+ if (!(tg3_flag(tp, USE_LINKCHG_REG) || tg3_flag(tp, POLL_SERDES))) {
struct tg3_hw_status *sblk = tp->napi[0].hw_status;
if (sblk->status & SD_STATUS_LINK_CHG) {
sblk->status = SD_STATUS_UPDATED |
(sblk->status & ~SD_STATUS_LINK_CHG);
spin_lock(&tp->lock);
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
tw32_f(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED |
MAC_STATUS_CFG_CHANGED |
@@ -5057,7 +5211,7 @@
/* run TX completion thread */
if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
tg3_tx(tnapi);
- if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+ if (unlikely(tg3_flag(tp, TX_RECOVERY_PENDING)))
return work_done;
}
@@ -5068,7 +5222,7 @@
if (*(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr)
work_done += tg3_rx(tnapi, budget - work_done);
- if ((tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) && tnapi == &tp->napi[1]) {
+ if (tg3_flag(tp, ENABLE_RSS) && tnapi == &tp->napi[1]) {
struct tg3_rx_prodring_set *dpr = &tp->napi[0].prodring;
int i, err = 0;
u32 std_prod_idx = dpr->rx_std_prod_idx;
@@ -5107,7 +5261,7 @@
while (1) {
work_done = tg3_poll_work(tnapi, work_done, budget);
- if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+ if (unlikely(tg3_flag(tp, TX_RECOVERY_PENDING)))
goto tx_recovery;
if (unlikely(work_done >= budget))
@@ -5141,6 +5295,40 @@
return work_done;
}
+static void tg3_process_error(struct tg3 *tp)
+{
+ u32 val;
+ bool real_error = false;
+
+ if (tg3_flag(tp, ERROR_PROCESSED))
+ return;
+
+ /* Check Flow Attention register */
+ val = tr32(HOSTCC_FLOW_ATTN);
+ if (val & ~HOSTCC_FLOW_ATTN_MBUF_LWM) {
+ netdev_err(tp->dev, "FLOW Attention error. Resetting chip.\n");
+ real_error = true;
+ }
+
+ if (tr32(MSGINT_STATUS) & ~MSGINT_STATUS_MSI_REQ) {
+ netdev_err(tp->dev, "MSI Status error. Resetting chip.\n");
+ real_error = true;
+ }
+
+ if (tr32(RDMAC_STATUS) || tr32(WDMAC_STATUS)) {
+ netdev_err(tp->dev, "DMA Status error. Resetting chip.\n");
+ real_error = true;
+ }
+
+ if (!real_error)
+ return;
+
+ tg3_dump_state(tp);
+
+ tg3_flag_set(tp, ERROR_PROCESSED);
+ schedule_work(&tp->reset_task);
+}
+
static int tg3_poll(struct napi_struct *napi, int budget)
{
struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
@@ -5149,17 +5337,20 @@
struct tg3_hw_status *sblk = tnapi->hw_status;
while (1) {
+ if (sblk->status & SD_STATUS_ERROR)
+ tg3_process_error(tp);
+
tg3_poll_link(tp);
work_done = tg3_poll_work(tnapi, work_done, budget);
- if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+ if (unlikely(tg3_flag(tp, TX_RECOVERY_PENDING)))
goto tx_recovery;
if (unlikely(work_done >= budget))
break;
- if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
+ if (tg3_flag(tp, TAGGED_STATUS)) {
/* tp->last_tag is used in tg3_int_reenable() below
* to tell the hw how much work has been processed,
* so we must read it before checking for more work.
@@ -5326,7 +5517,7 @@
* interrupt is ours and will flush the status block.
*/
if (unlikely(!(sblk->status & SD_STATUS_UPDATED))) {
- if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
+ if (tg3_flag(tp, CHIP_RESETTING) ||
(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
handled = 0;
goto out;
@@ -5375,7 +5566,7 @@
* interrupt is ours and will flush the status block.
*/
if (unlikely(sblk->status_tag == tnapi->last_irq_tag)) {
- if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
+ if (tg3_flag(tp, CHIP_RESETTING) ||
(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
handled = 0;
goto out;
@@ -5488,14 +5679,14 @@
tg3_full_lock(tp, 1);
- restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
- tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
+ restart_timer = tg3_flag(tp, RESTART_TIMER);
+ tg3_flag_clear(tp, RESTART_TIMER);
- if (tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING) {
+ if (tg3_flag(tp, TX_RECOVERY_PENDING)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
tp->write32_rx_mbox = tg3_write_flush_reg32;
- tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
- tp->tg3_flags &= ~TG3_FLAG_TX_RECOVERY_PENDING;
+ tg3_flag_set(tp, MBOX_WRITE_REORDER);
+ tg3_flag_clear(tp, TX_RECOVERY_PENDING);
}
tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
@@ -5515,21 +5706,13 @@
tg3_phy_start(tp);
}
-static void tg3_dump_short_state(struct tg3 *tp)
-{
- netdev_err(tp->dev, "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
- tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
- netdev_err(tp->dev, "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
- tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
-}
-
static void tg3_tx_timeout(struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
if (netif_msg_tx_err(tp)) {
netdev_err(dev, "transmit timed out, resetting\n");
- tg3_dump_short_state(tp);
+ tg3_dump_state(tp);
}
schedule_work(&tp->reset_task);
@@ -5548,7 +5731,7 @@
int len)
{
#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
- if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG)
+ if (tg3_flag(tp, 40BIT_DMA_BUG))
return ((u64) mapping + len) > DMA_BIT_MASK(40);
return 0;
#else
@@ -5556,89 +5739,6 @@
#endif
}
-static void tg3_set_txd(struct tg3_napi *, int, dma_addr_t, int, u32, u32);
-
-/* Workaround 4GB and 40-bit hardware DMA bugs. */
-static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
- struct sk_buff *skb, u32 last_plus_one,
- u32 *start, u32 base_flags, u32 mss)
-{
- struct tg3 *tp = tnapi->tp;
- struct sk_buff *new_skb;
- dma_addr_t new_addr = 0;
- u32 entry = *start;
- int i, ret = 0;
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
- new_skb = skb_copy(skb, GFP_ATOMIC);
- else {
- int more_headroom = 4 - ((unsigned long)skb->data & 3);
-
- new_skb = skb_copy_expand(skb,
- skb_headroom(skb) + more_headroom,
- skb_tailroom(skb), GFP_ATOMIC);
- }
-
- if (!new_skb) {
- ret = -1;
- } else {
- /* New SKB is guaranteed to be linear. */
- entry = *start;
- new_addr = pci_map_single(tp->pdev, new_skb->data, new_skb->len,
- PCI_DMA_TODEVICE);
- /* Make sure the mapping succeeded */
- if (pci_dma_mapping_error(tp->pdev, new_addr)) {
- ret = -1;
- dev_kfree_skb(new_skb);
- new_skb = NULL;
-
- /* Make sure new skb does not cross any 4G boundaries.
- * Drop the packet if it does.
- */
- } else if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
- tg3_4g_overflow_test(new_addr, new_skb->len)) {
- pci_unmap_single(tp->pdev, new_addr, new_skb->len,
- PCI_DMA_TODEVICE);
- ret = -1;
- dev_kfree_skb(new_skb);
- new_skb = NULL;
- } else {
- tg3_set_txd(tnapi, entry, new_addr, new_skb->len,
- base_flags, 1 | (mss << 1));
- *start = NEXT_TX(entry);
- }
- }
-
- /* Now clean up the sw ring entries. */
- i = 0;
- while (entry != last_plus_one) {
- int len;
-
- if (i == 0)
- len = skb_headlen(skb);
- else
- len = skb_shinfo(skb)->frags[i-1].size;
-
- pci_unmap_single(tp->pdev,
- dma_unmap_addr(&tnapi->tx_buffers[entry],
- mapping),
- len, PCI_DMA_TODEVICE);
- if (i == 0) {
- tnapi->tx_buffers[entry].skb = new_skb;
- dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
- new_addr);
- } else {
- tnapi->tx_buffers[entry].skb = NULL;
- }
- entry = NEXT_TX(entry);
- i++;
- }
-
- dev_kfree_skb(skb);
-
- return ret;
-}
-
static void tg3_set_txd(struct tg3_napi *tnapi, int entry,
dma_addr_t mapping, int len, u32 flags,
u32 mss_and_is_end)
@@ -5662,179 +5762,86 @@
txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT;
}
-/* hard_start_xmit for devices that don't have any bugs and
- * support TG3_FLG2_HW_TSO_2 and TG3_FLG2_HW_TSO_3 only.
- */
-static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+static void tg3_skb_error_unmap(struct tg3_napi *tnapi,
+ struct sk_buff *skb, int last)
{
- struct tg3 *tp = netdev_priv(dev);
- u32 len, entry, base_flags, mss;
- dma_addr_t mapping;
- struct tg3_napi *tnapi;
- struct netdev_queue *txq;
- unsigned int i, last;
+ int i;
+ u32 entry = tnapi->tx_prod;
+ struct ring_info *txb = &tnapi->tx_buffers[entry];
- txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
- tnapi = &tp->napi[skb_get_queue_mapping(skb)];
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
- tnapi++;
-
- /* We are running in BH disabled context with netif_tx_lock
- * and TX reclaim runs via tp->napi.poll inside of a software
- * interrupt. Furthermore, IRQ processing runs lockless so we have
- * no IRQ context deadlocks to worry about either. Rejoice!
- */
- if (unlikely(tg3_tx_avail(tnapi) <= (skb_shinfo(skb)->nr_frags + 1))) {
- if (!netif_tx_queue_stopped(txq)) {
- netif_tx_stop_queue(txq);
-
- /* This is a hard error, log it. */
- netdev_err(dev,
- "BUG! Tx Ring full when queue awake!\n");
- }
- return NETDEV_TX_BUSY;
- }
-
- entry = tnapi->tx_prod;
- base_flags = 0;
- mss = skb_shinfo(skb)->gso_size;
- if (mss) {
- int tcp_opt_len, ip_tcp_len;
- u32 hdrlen;
-
- if (skb_header_cloned(skb) &&
- pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- goto out_unlock;
- }
-
- if (skb_is_gso_v6(skb)) {
- hdrlen = skb_headlen(skb) - ETH_HLEN;
- } else {
- struct iphdr *iph = ip_hdr(skb);
-
- tcp_opt_len = tcp_optlen(skb);
- ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
-
- iph->check = 0;
- iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
- hdrlen = ip_tcp_len + tcp_opt_len;
- }
-
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
- mss |= (hdrlen & 0xc) << 12;
- if (hdrlen & 0x10)
- base_flags |= 0x00000010;
- base_flags |= (hdrlen & 0x3e0) << 5;
- } else
- mss |= hdrlen << 9;
-
- base_flags |= (TXD_FLAG_CPU_PRE_DMA |
- TXD_FLAG_CPU_POST_DMA);
-
- tcp_hdr(skb)->check = 0;
-
- } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
- base_flags |= TXD_FLAG_TCPUDP_CSUM;
- }
-
- if (vlan_tx_tag_present(skb))
- base_flags |= (TXD_FLAG_VLAN |
- (vlan_tx_tag_get(skb) << 16));
-
- len = skb_headlen(skb);
-
- /* Queue skb data, a.k.a. the main skb fragment. */
- mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(tp->pdev, mapping)) {
- dev_kfree_skb(skb);
- goto out_unlock;
- }
-
- tnapi->tx_buffers[entry].skb = skb;
- dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping, mapping);
-
- if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
- !mss && skb->len > VLAN_ETH_FRAME_LEN)
- base_flags |= TXD_FLAG_JMB_PKT;
-
- tg3_set_txd(tnapi, entry, mapping, len, base_flags,
- (skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
-
- entry = NEXT_TX(entry);
-
- /* Now loop through additional data fragments, and queue them. */
- if (skb_shinfo(skb)->nr_frags > 0) {
- last = skb_shinfo(skb)->nr_frags - 1;
- for (i = 0; i <= last; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
- len = frag->size;
- mapping = pci_map_page(tp->pdev,
- frag->page,
- frag->page_offset,
- len, PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(tp->pdev, mapping))
- goto dma_error;
-
- tnapi->tx_buffers[entry].skb = NULL;
- dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
- mapping);
-
- tg3_set_txd(tnapi, entry, mapping, len,
- base_flags, (i == last) | (mss << 1));
-
- entry = NEXT_TX(entry);
- }
- }
-
- /* Packets are ready, update Tx producer idx local and on card. */
- tw32_tx_mbox(tnapi->prodmbox, entry);
-
- tnapi->tx_prod = entry;
- if (unlikely(tg3_tx_avail(tnapi) <= (MAX_SKB_FRAGS + 1))) {
- netif_tx_stop_queue(txq);
-
- /* netif_tx_stop_queue() must be done before checking
- * checking tx index in tg3_tx_avail() below, because in
- * tg3_tx(), we update tx index before checking for
- * netif_tx_queue_stopped().
- */
- smp_mb();
- if (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi))
- netif_tx_wake_queue(txq);
- }
-
-out_unlock:
- mmiowb();
-
- return NETDEV_TX_OK;
-
-dma_error:
- last = i;
- entry = tnapi->tx_prod;
- tnapi->tx_buffers[entry].skb = NULL;
- pci_unmap_single(tp->pdev,
- dma_unmap_addr(&tnapi->tx_buffers[entry], mapping),
+ pci_unmap_single(tnapi->tp->pdev,
+ dma_unmap_addr(txb, mapping),
skb_headlen(skb),
PCI_DMA_TODEVICE);
for (i = 0; i <= last; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- entry = NEXT_TX(entry);
- pci_unmap_page(tp->pdev,
- dma_unmap_addr(&tnapi->tx_buffers[entry],
- mapping),
+ entry = NEXT_TX(entry);
+ txb = &tnapi->tx_buffers[entry];
+
+ pci_unmap_page(tnapi->tp->pdev,
+ dma_unmap_addr(txb, mapping),
frag->size, PCI_DMA_TODEVICE);
}
+}
+
+/* Workaround 4GB and 40-bit hardware DMA bugs. */
+static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
+ struct sk_buff *skb,
+ u32 base_flags, u32 mss)
+{
+ struct tg3 *tp = tnapi->tp;
+ struct sk_buff *new_skb;
+ dma_addr_t new_addr = 0;
+ u32 entry = tnapi->tx_prod;
+ int ret = 0;
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
+ new_skb = skb_copy(skb, GFP_ATOMIC);
+ else {
+ int more_headroom = 4 - ((unsigned long)skb->data & 3);
+
+ new_skb = skb_copy_expand(skb,
+ skb_headroom(skb) + more_headroom,
+ skb_tailroom(skb), GFP_ATOMIC);
+ }
+
+ if (!new_skb) {
+ ret = -1;
+ } else {
+ /* New SKB is guaranteed to be linear. */
+ new_addr = pci_map_single(tp->pdev, new_skb->data, new_skb->len,
+ PCI_DMA_TODEVICE);
+ /* Make sure the mapping succeeded */
+ if (pci_dma_mapping_error(tp->pdev, new_addr)) {
+ ret = -1;
+ dev_kfree_skb(new_skb);
+
+ /* Make sure new skb does not cross any 4G boundaries.
+ * Drop the packet if it does.
+ */
+ } else if (tg3_flag(tp, 4G_DMA_BNDRY_BUG) &&
+ tg3_4g_overflow_test(new_addr, new_skb->len)) {
+ pci_unmap_single(tp->pdev, new_addr, new_skb->len,
+ PCI_DMA_TODEVICE);
+ ret = -1;
+ dev_kfree_skb(new_skb);
+ } else {
+ tnapi->tx_buffers[entry].skb = new_skb;
+ dma_unmap_addr_set(&tnapi->tx_buffers[entry],
+ mapping, new_addr);
+
+ tg3_set_txd(tnapi, entry, new_addr, new_skb->len,
+ base_flags, 1 | (mss << 1));
+ }
+ }
dev_kfree_skb(skb);
- return NETDEV_TX_OK;
+
+ return ret;
}
-static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *,
- struct net_device *);
+static netdev_tx_t tg3_start_xmit(struct sk_buff *, struct net_device *);
/* Use GSO to workaround a rare TSO bug that may be triggered when the
* TSO header is greater than 80 bytes.
@@ -5868,7 +5875,7 @@
nskb = segs;
segs = segs->next;
nskb->next = NULL;
- tg3_start_xmit_dma_bug(nskb, tp->dev);
+ tg3_start_xmit(nskb, tp->dev);
} while (segs);
tg3_tso_bug_end:
@@ -5878,22 +5885,21 @@
}
/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
- * support TG3_FLG2_HW_TSO_1 or firmware TSO only.
+ * support TG3_FLAG_HW_TSO_1 or firmware TSO only.
*/
-static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
u32 len, entry, base_flags, mss;
- int would_hit_hwbug;
+ int i = -1, would_hit_hwbug;
dma_addr_t mapping;
struct tg3_napi *tnapi;
struct netdev_queue *txq;
- unsigned int i, last;
+ unsigned int last;
txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
tnapi = &tp->napi[skb_get_queue_mapping(skb)];
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+ if (tg3_flag(tp, ENABLE_TSS))
tnapi++;
/* We are running in BH disabled context with netif_tx_lock
@@ -5944,13 +5950,15 @@
}
if (unlikely((ETH_HLEN + hdr_len) > 80) &&
- (tp->tg3_flags2 & TG3_FLG2_TSO_BUG))
+ tg3_flag(tp, TSO_BUG))
return tg3_tso_bug(tp, skb);
base_flags |= (TXD_FLAG_CPU_PRE_DMA |
TXD_FLAG_CPU_POST_DMA);
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3)) {
tcp_hdr(skb)->check = 0;
base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
} else
@@ -5959,14 +5967,14 @@
IPPROTO_TCP,
0);
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
+ if (tg3_flag(tp, HW_TSO_3)) {
mss |= (hdr_len & 0xc) << 12;
if (hdr_len & 0x10)
base_flags |= 0x00000010;
base_flags |= (hdr_len & 0x3e0) << 5;
- } else if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)
+ } else if (tg3_flag(tp, HW_TSO_2))
mss |= hdr_len << 9;
- else if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_1) ||
+ else if (tg3_flag(tp, HW_TSO_1) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
if (tcp_opt_len || iph->ihl > 5) {
int tsflags;
@@ -5988,7 +5996,7 @@
base_flags |= (TXD_FLAG_VLAN |
(vlan_tx_tag_get(skb) << 16));
- if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
+ if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
!mss && skb->len > VLAN_ETH_FRAME_LEN)
base_flags |= TXD_FLAG_JMB_PKT;
@@ -6005,18 +6013,18 @@
would_hit_hwbug = 0;
- if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) && len <= 8)
+ if (tg3_flag(tp, SHORT_DMA_BUG) && len <= 8)
would_hit_hwbug = 1;
- if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+ if (tg3_flag(tp, 4G_DMA_BNDRY_BUG) &&
tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
- if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+ if (tg3_flag(tp, 40BIT_DMA_LIMIT_BUG) &&
tg3_40bit_overflow_test(tp, mapping, len))
would_hit_hwbug = 1;
- if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
+ if (tg3_flag(tp, 5701_DMA_BUG))
would_hit_hwbug = 1;
tg3_set_txd(tnapi, entry, mapping, len, base_flags,
@@ -6042,19 +6050,21 @@
if (pci_dma_mapping_error(tp->pdev, mapping))
goto dma_error;
- if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) &&
+ if (tg3_flag(tp, SHORT_DMA_BUG) &&
len <= 8)
would_hit_hwbug = 1;
- if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+ if (tg3_flag(tp, 4G_DMA_BNDRY_BUG) &&
tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
- if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+ if (tg3_flag(tp, 40BIT_DMA_LIMIT_BUG) &&
tg3_40bit_overflow_test(tp, mapping, len))
would_hit_hwbug = 1;
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3))
tg3_set_txd(tnapi, entry, mapping, len,
base_flags, (i == last)|(mss << 1));
else
@@ -6066,20 +6076,15 @@
}
if (would_hit_hwbug) {
- u32 last_plus_one = entry;
- u32 start;
-
- start = entry - 1 - skb_shinfo(skb)->nr_frags;
- start &= (TG3_TX_RING_SIZE - 1);
+ tg3_skb_error_unmap(tnapi, skb, i);
/* If the workaround fails due to memory/mapping
* failure, silently drop this packet.
*/
- if (tigon3_dma_hwbug_workaround(tnapi, skb, last_plus_one,
- &start, base_flags, mss))
+ if (tigon3_dma_hwbug_workaround(tnapi, skb, base_flags, mss))
goto out_unlock;
- entry = start;
+ entry = NEXT_TX(tnapi->tx_prod);
}
/* Packets are ready, update Tx producer idx local and on card. */
@@ -6105,43 +6110,86 @@
return NETDEV_TX_OK;
dma_error:
- last = i;
- entry = tnapi->tx_prod;
- tnapi->tx_buffers[entry].skb = NULL;
- pci_unmap_single(tp->pdev,
- dma_unmap_addr(&tnapi->tx_buffers[entry], mapping),
- skb_headlen(skb),
- PCI_DMA_TODEVICE);
- for (i = 0; i <= last; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- entry = NEXT_TX(entry);
-
- pci_unmap_page(tp->pdev,
- dma_unmap_addr(&tnapi->tx_buffers[entry],
- mapping),
- frag->size, PCI_DMA_TODEVICE);
- }
-
+ tg3_skb_error_unmap(tnapi, skb, i);
dev_kfree_skb(skb);
+ tnapi->tx_buffers[tnapi->tx_prod].skb = NULL;
return NETDEV_TX_OK;
}
+static void tg3_set_loopback(struct net_device *dev, u32 features)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ if (features & NETIF_F_LOOPBACK) {
+ if (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)
+ return;
+
+ /*
+ * Clear MAC_MODE_HALF_DUPLEX or you won't get packets back in
+ * loopback mode if Half-Duplex mode was negotiated earlier.
+ */
+ tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
+
+ /* Enable internal MAC loopback mode */
+ tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;
+ spin_lock_bh(&tp->lock);
+ tw32(MAC_MODE, tp->mac_mode);
+ netif_carrier_on(tp->dev);
+ spin_unlock_bh(&tp->lock);
+ netdev_info(dev, "Internal MAC loopback mode enabled.\n");
+ } else {
+ if (!(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
+ return;
+
+ /* Disable internal MAC loopback mode */
+ tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;
+ spin_lock_bh(&tp->lock);
+ tw32(MAC_MODE, tp->mac_mode);
+ /* Force link status check */
+ tg3_setup_phy(tp, 1);
+ spin_unlock_bh(&tp->lock);
+ netdev_info(dev, "Internal MAC loopback mode disabled.\n");
+ }
+}
+
+static u32 tg3_fix_features(struct net_device *dev, u32 features)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ if (dev->mtu > ETH_DATA_LEN && tg3_flag(tp, 5780_CLASS))
+ features &= ~NETIF_F_ALL_TSO;
+
+ return features;
+}
+
+static int tg3_set_features(struct net_device *dev, u32 features)
+{
+ u32 changed = dev->features ^ features;
+
+ if ((changed & NETIF_F_LOOPBACK) && netif_running(dev))
+ tg3_set_loopback(dev, features);
+
+ return 0;
+}
+
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
int new_mtu)
{
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN) {
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
- tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
- ethtool_op_set_tso(dev, 0);
+ if (tg3_flag(tp, 5780_CLASS)) {
+ netdev_update_features(dev);
+ tg3_flag_clear(tp, TSO_CAPABLE);
} else {
- tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
+ tg3_flag_set(tp, JUMBO_RING_ENABLE);
}
} else {
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
- tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
- tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
+ if (tg3_flag(tp, 5780_CLASS)) {
+ tg3_flag_set(tp, TSO_CAPABLE);
+ netdev_update_features(dev);
+ }
+ tg3_flag_clear(tp, JUMBO_RING_ENABLE);
}
}
@@ -6195,7 +6243,7 @@
tg3_rx_skb_free(tp, &tpr->rx_std_buffers[i],
tp->rx_pkt_map_sz);
- if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+ if (tg3_flag(tp, JUMBO_CAPABLE)) {
for (i = tpr->rx_jmb_cons_idx;
i != tpr->rx_jmb_prod_idx;
i = (i + 1) & tp->rx_jmb_ring_mask) {
@@ -6211,8 +6259,7 @@
tg3_rx_skb_free(tp, &tpr->rx_std_buffers[i],
tp->rx_pkt_map_sz);
- if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ if (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS)) {
for (i = 0; i <= tp->rx_jmb_ring_mask; i++)
tg3_rx_skb_free(tp, &tpr->rx_jmb_buffers[i],
TG3_RX_JMB_MAP_SZ);
@@ -6249,7 +6296,7 @@
memset(tpr->rx_std, 0, TG3_RX_STD_RING_BYTES(tp));
rx_pkt_dma_sz = TG3_RX_STD_DMA_SZ;
- if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
+ if (tg3_flag(tp, 5780_CLASS) &&
tp->dev->mtu > ETH_DATA_LEN)
rx_pkt_dma_sz = TG3_RX_JMB_DMA_SZ;
tp->rx_pkt_map_sz = TG3_RX_DMA_TO_MAP_SZ(rx_pkt_dma_sz);
@@ -6282,13 +6329,12 @@
}
}
- if (!(tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
+ if (!tg3_flag(tp, JUMBO_CAPABLE) || tg3_flag(tp, 5780_CLASS))
goto done;
memset(tpr->rx_jmb, 0, TG3_RX_JMB_RING_BYTES(tp));
- if (!(tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE))
+ if (!tg3_flag(tp, JUMBO_RING_ENABLE))
goto done;
for (i = 0; i <= tp->rx_jmb_ring_mask; i++) {
@@ -6357,8 +6403,7 @@
if (!tpr->rx_std)
goto err_out;
- if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ if (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS)) {
tpr->rx_jmb_buffers = kzalloc(TG3_RX_JMB_BUFF_RING_SIZE(tp),
GFP_KERNEL);
if (!tpr->rx_jmb_buffers)
@@ -6556,8 +6601,8 @@
/* If multivector TSS is enabled, vector 0 does not handle
* tx interrupts. Don't allocate any resources for it.
*/
- if ((!i && !(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)) ||
- (i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS))) {
+ if ((!i && !tg3_flag(tp, ENABLE_TSS)) ||
+ (i && tg3_flag(tp, ENABLE_TSS))) {
tnapi->tx_buffers = kzalloc(sizeof(struct ring_info) *
TG3_TX_RING_SIZE,
GFP_KERNEL);
@@ -6597,7 +6642,7 @@
* If multivector RSS is enabled, vector 0 does not handle
* rx or tx interrupts. Don't allocate any resources for it.
*/
- if (!i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS))
+ if (!i && tg3_flag(tp, ENABLE_RSS))
continue;
tnapi->rx_rcb = dma_alloc_coherent(&tp->pdev->dev,
@@ -6627,7 +6672,7 @@
unsigned int i;
u32 val;
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ if (tg3_flag(tp, 5705_PLUS)) {
switch (ofs) {
case RCVLSC_MODE:
case DMAC_MODE:
@@ -6737,7 +6782,7 @@
u32 apedata;
/* NCSI does not support APE events */
- if (tp->tg3_flags3 & TG3_FLG3_APE_HAS_NCSI)
+ if (tg3_flag(tp, APE_HAS_NCSI))
return;
apedata = tg3_ape_read32(tp, TG3_APE_SEG_SIG);
@@ -6776,7 +6821,7 @@
u32 event;
u32 apedata;
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+ if (!tg3_flag(tp, ENABLE_APE))
return;
switch (kind) {
@@ -6805,7 +6850,7 @@
tg3_ape_write32(tp, TG3_APE_HOST_SEG_SIG, 0x0);
if (device_may_wakeup(&tp->pdev->dev) &&
- (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)) {
+ tg3_flag(tp, WOL_ENABLE)) {
tg3_ape_write32(tp, TG3_APE_HOST_WOL_SPEED,
TG3_APE_HOST_WOL_SPEED_AUTO);
apedata = TG3_APE_HOST_DRVR_STATE_WOL;
@@ -6834,7 +6879,7 @@
tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
- if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
+ if (tg3_flag(tp, ASF_NEW_HANDSHAKE)) {
switch (kind) {
case RESET_KIND_INIT:
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
@@ -6864,7 +6909,7 @@
/* tp->lock is held. */
static void tg3_write_sig_post_reset(struct tg3 *tp, int kind)
{
- if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
+ if (tg3_flag(tp, ASF_NEW_HANDSHAKE)) {
switch (kind) {
case RESET_KIND_INIT:
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
@@ -6888,7 +6933,7 @@
/* tp->lock is held. */
static void tg3_write_sig_legacy(struct tg3 *tp, int kind)
{
- if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+ if (tg3_flag(tp, ENABLE_ASF)) {
switch (kind) {
case RESET_KIND_INIT:
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
@@ -6939,9 +6984,8 @@
* of the above loop as an error, but do report the lack of
* running firmware once.
*/
- if (i >= 100000 &&
- !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
- tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
+ if (i >= 100000 && !tg3_flag(tp, NO_FWARE_REPORTED)) {
+ tg3_flag_set(tp, NO_FWARE_REPORTED);
netdev_info(tp->dev, "No firmware running\n");
}
@@ -6974,10 +7018,10 @@
/* Set MAX PCI retry to zero. */
val = (PCISTATE_ROM_ENABLE | PCISTATE_ROM_RETRY_ENABLE);
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
- (tp->tg3_flags & TG3_FLAG_PCIX_MODE))
+ tg3_flag(tp, PCIX_MODE))
val |= PCISTATE_RETRY_SAME_DMA;
/* Allow reads and writes to the APE register and memory space. */
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
val |= PCISTATE_ALLOW_APE_CTLSPC_WR |
PCISTATE_ALLOW_APE_SHMEM_WR |
PCISTATE_ALLOW_APE_PSPACE_WR;
@@ -6986,7 +7030,7 @@
pci_write_config_word(tp->pdev, PCI_COMMAND, tp->pci_cmd);
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) {
- if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
+ if (tg3_flag(tp, PCI_EXPRESS))
pcie_set_readrq(tp->pdev, tp->pcie_readrq);
else {
pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
@@ -6997,7 +7041,7 @@
}
/* Make sure PCI-X relaxed ordering bit is clear. */
- if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+ if (tg3_flag(tp, PCIX_MODE)) {
u16 pcix_cmd;
pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
@@ -7007,12 +7051,12 @@
pcix_cmd);
}
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+ if (tg3_flag(tp, 5780_CLASS)) {
/* Chip reset on 5780 will reset MSI enable bit,
* so need to restore it.
*/
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+ if (tg3_flag(tp, USING_MSI)) {
u16 ctrl;
pci_read_config_word(tp->pdev,
@@ -7052,7 +7096,7 @@
tg3_save_pci_state(tp);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
- (tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+ tg3_flag(tp, 5755_PLUS))
tw32(GRC_FASTBOOT_PC, 0);
/*
@@ -7071,7 +7115,7 @@
* at this time, but the irq handler may still be called due to irq
* sharing or irqpoll.
*/
- tp->tg3_flags |= TG3_FLAG_CHIP_RESETTING;
+ tg3_flag_set(tp, CHIP_RESETTING);
for (i = 0; i < tp->irq_cnt; i++) {
struct tg3_napi *tnapi = &tp->napi[i];
if (tnapi->hw_status) {
@@ -7094,10 +7138,10 @@
/* do the reset */
val = GRC_MISC_CFG_CORECLK_RESET;
- if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+ if (tg3_flag(tp, PCI_EXPRESS)) {
/* Force PCIe 1.0a mode */
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
- !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
+ !tg3_flag(tp, 57765_PLUS) &&
tr32(TG3_PCIE_PHY_TSTCTL) ==
(TG3_PCIE_PHY_TSTCTL_PCIE10 | TG3_PCIE_PHY_TSTCTL_PSCRAM))
tw32(TG3_PCIE_PHY_TSTCTL, TG3_PCIE_PHY_TSTCTL_PSCRAM);
@@ -7115,8 +7159,7 @@
}
/* Manage gphy power for all CPMU absent PCIe devices. */
- if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- !(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT))
+ if (tg3_flag(tp, 5705_PLUS) && !tg3_flag(tp, CPMU_PRESENT))
val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
tw32(GRC_MISC_CFG, val);
@@ -7149,7 +7192,7 @@
udelay(120);
- if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && tp->pcie_cap) {
+ if (tg3_flag(tp, PCI_EXPRESS) && tp->pcie_cap) {
u16 val16;
if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A0) {
@@ -7175,7 +7218,7 @@
* Older PCIe devices only support the 128 byte
* MPS setting. Enforce the restriction.
*/
- if (!(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT))
+ if (!tg3_flag(tp, CPMU_PRESENT))
val16 &= ~PCI_EXP_DEVCTL_PAYLOAD;
pci_write_config_word(tp->pdev,
tp->pcie_cap + PCI_EXP_DEVCTL,
@@ -7194,10 +7237,11 @@
tg3_restore_pci_state(tp);
- tp->tg3_flags &= ~TG3_FLAG_CHIP_RESETTING;
+ tg3_flag_clear(tp, CHIP_RESETTING);
+ tg3_flag_clear(tp, ERROR_PROCESSED);
val = 0;
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ if (tg3_flag(tp, 5780_CLASS))
val = tr32(MEMARB_MODE);
tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
@@ -7222,7 +7266,7 @@
tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
}
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
tp->mac_mode = MAC_MODE_APE_TX_EN |
MAC_MODE_APE_RX_EN |
MAC_MODE_TDE_ENABLE;
@@ -7247,28 +7291,33 @@
tg3_mdio_start(tp);
- if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+ if (tg3_flag(tp, PCI_EXPRESS) &&
tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
- !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+ !tg3_flag(tp, 57765_PLUS)) {
val = tr32(0x7c00);
tw32(0x7c00, val | (1 << 25));
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+ val = tr32(TG3_CPMU_CLCK_ORIDE);
+ tw32(TG3_CPMU_CLCK_ORIDE, val & ~CPMU_CLCK_ORIDE_MAC_ORIDE_EN);
+ }
+
/* Reprobe ASF enable state. */
- tp->tg3_flags &= ~TG3_FLAG_ENABLE_ASF;
- tp->tg3_flags2 &= ~TG3_FLG2_ASF_NEW_HANDSHAKE;
+ tg3_flag_clear(tp, ENABLE_ASF);
+ tg3_flag_clear(tp, ASF_NEW_HANDSHAKE);
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
u32 nic_cfg;
tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
- tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
+ tg3_flag_set(tp, ENABLE_ASF);
tp->last_event_jiffies = jiffies;
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
- tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
+ if (tg3_flag(tp, 5750_PLUS))
+ tg3_flag_set(tp, ASF_NEW_HANDSHAKE);
}
}
@@ -7278,8 +7327,7 @@
/* tp->lock is held. */
static void tg3_stop_fw(struct tg3 *tp)
{
- if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
- !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
+ if (tg3_flag(tp, ENABLE_ASF) && !tg3_flag(tp, ENABLE_APE)) {
/* Wait for RX cpu to ACK the previous event. */
tg3_wait_for_event_ack(tp);
@@ -7325,8 +7373,7 @@
{
int i;
- BUG_ON(offset == TX_CPU_BASE &&
- (tp->tg3_flags2 & TG3_FLG2_5705_PLUS));
+ BUG_ON(offset == TX_CPU_BASE && tg3_flag(tp, 5705_PLUS));
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
u32 val = tr32(GRC_VCPU_EXT_CTRL);
@@ -7361,7 +7408,7 @@
}
/* Clear firmware's nvram arbitration. */
- if (tp->tg3_flags & TG3_FLAG_NVRAM)
+ if (tg3_flag(tp, NVRAM))
tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
return 0;
}
@@ -7379,15 +7426,14 @@
int err, lock_err, i;
void (*write_op)(struct tg3 *, u32, u32);
- if (cpu_base == TX_CPU_BASE &&
- (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (cpu_base == TX_CPU_BASE && tg3_flag(tp, 5705_PLUS)) {
netdev_err(tp->dev,
"%s: Trying to load TX cpu firmware which is 5705\n",
__func__);
return -EINVAL;
}
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ if (tg3_flag(tp, 5705_PLUS))
write_op = tg3_write_mem;
else
write_op = tg3_write_indirect_reg32;
@@ -7473,8 +7519,6 @@
return 0;
}
-/* 5705 needs a special version of the TSO firmware. */
-
/* tp->lock is held. */
static int tg3_load_tso_firmware(struct tg3 *tp)
{
@@ -7483,7 +7527,9 @@
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3))
return 0;
fw_data = (void *)tp->fw->data;
@@ -7552,7 +7598,7 @@
if (!netif_running(dev))
return 0;
- if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+ if (tg3_flag(tp, ENABLE_ASF)) {
u32 addr0_high, addr0_low, addr1_high, addr1_low;
addr0_high = tr32(MAC_ADDR_0_HIGH);
@@ -7587,7 +7633,7 @@
(bdinfo_addr + TG3_BDINFO_MAXLEN_FLAGS),
maxlen_flags);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
tg3_write_mem(tp,
(bdinfo_addr + TG3_BDINFO_NIC_ADDR),
nic_addr);
@@ -7598,7 +7644,7 @@
{
int i;
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)) {
+ if (!tg3_flag(tp, ENABLE_TSS)) {
tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
@@ -7608,7 +7654,7 @@
tw32(HOSTCC_TXCOAL_MAXF_INT, 0);
}
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)) {
+ if (!tg3_flag(tp, ENABLE_RSS)) {
tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
@@ -7618,7 +7664,7 @@
tw32(HOSTCC_RXCOAL_MAXF_INT, 0);
}
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
u32 val = ec->stats_block_coalesce_usecs;
tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
@@ -7640,7 +7686,7 @@
reg = HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18;
tw32(reg, ec->rx_max_coalesced_frames_irq);
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS) {
+ if (tg3_flag(tp, ENABLE_TSS)) {
reg = HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18;
tw32(reg, ec->tx_coalesce_usecs);
reg = HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18;
@@ -7655,7 +7701,7 @@
tw32(HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18, 0);
tw32(HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS) {
+ if (tg3_flag(tp, ENABLE_TSS)) {
tw32(HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18, 0);
tw32(HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18, 0);
tw32(HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
@@ -7671,10 +7717,9 @@
struct tg3_napi *tnapi = &tp->napi[0];
/* Disable all transmit rings but the first. */
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16;
- else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+ else if (tg3_flag(tp, 5717_PLUS))
limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 4;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2;
@@ -7688,10 +7733,9 @@
/* Disable all receive return rings but the first. */
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+ if (tg3_flag(tp, 5717_PLUS))
limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17;
- else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ else if (!tg3_flag(tp, 5705_PLUS))
limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
@@ -7708,16 +7752,16 @@
tw32_mailbox_f(tp->napi[0].int_mbox, 1);
/* Zero mailbox registers. */
- if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) {
+ if (tg3_flag(tp, SUPPORT_MSIX)) {
for (i = 1; i < tp->irq_max; i++) {
tp->napi[i].tx_prod = 0;
tp->napi[i].tx_cons = 0;
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+ if (tg3_flag(tp, ENABLE_TSS))
tw32_mailbox(tp->napi[i].prodmbox, 0);
tw32_rx_mbox(tp->napi[i].consmbox, 0);
tw32_mailbox_f(tp->napi[i].int_mbox, 1);
}
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS))
+ if (!tg3_flag(tp, ENABLE_TSS))
tw32_mailbox(tp->napi[0].prodmbox, 0);
} else {
tp->napi[0].tx_prod = 0;
@@ -7727,7 +7771,7 @@
}
/* Make sure the NIC-based send BD rings are disabled. */
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
u32 mbox = MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW;
for (i = 0; i < 16; i++)
tw32_tx_mbox(mbox + i * 8, 0);
@@ -7787,6 +7831,47 @@
}
}
+static void tg3_setup_rxbd_thresholds(struct tg3 *tp)
+{
+ u32 val, bdcache_maxcnt, host_rep_thresh, nic_rep_thresh;
+
+ if (!tg3_flag(tp, 5750_PLUS) ||
+ tg3_flag(tp, 5780_CLASS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+ bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5700;
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+ bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5755;
+ else
+ bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5906;
+
+ nic_rep_thresh = min(bdcache_maxcnt / 2, tp->rx_std_max_post);
+ host_rep_thresh = max_t(u32, tp->rx_pending / 8, 1);
+
+ val = min(nic_rep_thresh, host_rep_thresh);
+ tw32(RCVBDI_STD_THRESH, val);
+
+ if (tg3_flag(tp, 57765_PLUS))
+ tw32(STD_REPLENISH_LWM, bdcache_maxcnt);
+
+ if (!tg3_flag(tp, JUMBO_CAPABLE) || tg3_flag(tp, 5780_CLASS))
+ return;
+
+ if (!tg3_flag(tp, 5705_PLUS))
+ bdcache_maxcnt = TG3_SRAM_RX_JMB_BDCACHE_SIZE_5700;
+ else
+ bdcache_maxcnt = TG3_SRAM_RX_JMB_BDCACHE_SIZE_5717;
+
+ host_rep_thresh = max_t(u32, tp->rx_jumbo_pending / 8, 1);
+
+ val = min(bdcache_maxcnt / 2, host_rep_thresh);
+ tw32(RCVBDI_JUMBO_THRESH, val);
+
+ if (tg3_flag(tp, 57765_PLUS))
+ tw32(JMB_REPLENISH_LWM, bdcache_maxcnt);
+}
+
/* tp->lock is held. */
static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
{
@@ -7800,7 +7885,7 @@
tg3_write_sig_pre_reset(tp, RESET_KIND_INIT);
- if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)
+ if (tg3_flag(tp, INIT_COMPLETE))
tg3_abort_hw(tp, 1);
/* Enable MAC control of LPI */
@@ -7820,7 +7905,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN;
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
val |= TG3_CPMU_EEEMD_APE_TX_DET_EN;
tw32_f(TG3_CPMU_EEE_MODE, val);
@@ -7879,7 +7964,7 @@
tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
}
- if (tp->tg3_flags3 & TG3_FLG3_L1PLLPD_EN) {
+ if (tg3_flag(tp, L1PLLPD_EN)) {
u32 grc_mode = tr32(GRC_MODE);
/* Access the lower 1K of PL PCIE block registers. */
@@ -7909,6 +7994,22 @@
tw32(GRC_MODE, grc_mode);
}
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_57765_AX) {
+ u32 grc_mode = tr32(GRC_MODE);
+
+ /* Access the lower 1K of DL PCIE block registers. */
+ val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
+ tw32(GRC_MODE, val | GRC_MODE_PCIE_DL_SEL);
+
+ val = tr32(TG3_PCIE_TLDLPL_PORT +
+ TG3_PCIE_DL_LO_FTSMAX);
+ val &= ~TG3_PCIE_DL_LO_FTSMAX_MSK;
+ tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_DL_LO_FTSMAX,
+ val | TG3_PCIE_DL_LO_FTSMAX_VAL);
+
+ tw32(GRC_MODE, grc_mode);
+ }
+
val = tr32(TG3_CPMU_LSPD_10MB_CLK);
val &= ~CPMU_LSPD_10MB_MACCLK_MASK;
val |= CPMU_LSPD_10MB_MACCLK_6_25;
@@ -7920,20 +8021,20 @@
* other revision. But do not set this on PCI Express
* chips and don't even touch the clocks if the CPMU is present.
*/
- if (!(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT)) {
- if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
+ if (!tg3_flag(tp, CPMU_PRESENT)) {
+ if (!tg3_flag(tp, PCI_EXPRESS))
tp->pci_clock_ctrl |= CLOCK_CTRL_DELAY_PCI_GRANT;
tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
}
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
- (tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
+ tg3_flag(tp, PCIX_MODE)) {
val = tr32(TG3PCI_PCISTATE);
val |= PCISTATE_RETRY_SAME_DMA;
tw32(TG3PCI_PCISTATE, val);
}
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+ if (tg3_flag(tp, ENABLE_APE)) {
/* Allow reads and writes to the
* APE register and memory space.
*/
@@ -7960,11 +8061,14 @@
if (err)
return err;
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+ if (tg3_flag(tp, 57765_PLUS)) {
val = tr32(TG3PCI_DMA_RW_CTRL) &
~DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0)
val &= ~DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
+ val |= DMA_RWCTRL_TAGGED_STAT_WA;
tw32(TG3PCI_DMA_RW_CTRL, val | tp->dma_rwctrl);
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {
@@ -7999,7 +8103,7 @@
tw32(GRC_MISC_CFG, val);
/* Initialize MBUF/DESC pool. */
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
+ if (tg3_flag(tp, 5750_PLUS)) {
/* Do nothing. */
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE);
@@ -8009,7 +8113,7 @@
tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE96);
tw32(BUFMGR_DMA_DESC_POOL_ADDR, NIC_SRAM_DMA_DESC_POOL_BASE);
tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
- } else if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
+ } else if (tg3_flag(tp, TSO_CAPABLE)) {
int fw_len;
fw_len = tp->fw_len;
@@ -8043,6 +8147,10 @@
val = BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
val |= BUFMGR_MODE_NO_TX_UNDERRUN;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+ tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 ||
+ tp->pci_chip_rev_id == CHIPREV_ID_5720_A0)
+ val |= BUFMGR_MODE_MBLOW_ATTN_ENAB;
tw32(BUFMGR_MODE, val);
for (i = 0; i < 2000; i++) {
if (tr32(BUFMGR_MODE) & BUFMGR_MODE_ENABLE)
@@ -8054,21 +8162,10 @@
return -ENODEV;
}
- /* Setup replenish threshold. */
- val = tp->rx_pending / 8;
- if (val == 0)
- val = 1;
- else if (val > tp->rx_std_max_post)
- val = tp->rx_std_max_post;
- else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1)
- tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2);
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1)
+ tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2);
- if (val > (TG3_RX_INTERNAL_RING_SZ_5906 / 2))
- val = TG3_RX_INTERNAL_RING_SZ_5906 / 2;
- }
-
- tw32(RCVBDI_STD_THRESH, val);
+ tg3_setup_rxbd_thresholds(tp);
/* Initialize TG3_BDINFO's at:
* RCVDBDI_STD_BD: standard eth size rx ring
@@ -8091,13 +8188,12 @@
((u64) tpr->rx_std_mapping >> 32));
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tpr->rx_std_mapping & 0xffffffff));
- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5719)
+ if (!tg3_flag(tp, 5717_PLUS))
tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_BUFFER_DESC);
/* Disable the mini ring */
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
tw32(RCVDBDI_MINI_BD + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
@@ -8105,20 +8201,18 @@
* blocks on those devices that have them.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
- ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))) {
- /* Setup replenish threshold. */
- tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
+ (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS))) {
- if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
+ if (tg3_flag(tp, JUMBO_RING_ENABLE)) {
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
((u64) tpr->rx_jmb_mapping >> 32));
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tpr->rx_jmb_mapping & 0xffffffff));
+ val = TG3_RX_JMB_RING_SIZE(tp) <<
+ BDINFO_FLAGS_MAXLEN_SHIFT;
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
- (RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT) |
- BDINFO_FLAGS_USE_EXT_RECV);
- if (!(tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) ||
+ val | BDINFO_FLAGS_USE_EXT_RECV);
+ if (!tg3_flag(tp, USE_JUMBO_BDFLAG) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_JUMBO_BUFFER_DESC);
@@ -8127,32 +8221,27 @@
BDINFO_FLAGS_DISABLED);
}
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+ if (tg3_flag(tp, 57765_PLUS)) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
- val = RX_STD_MAX_SIZE_5705;
+ val = TG3_RX_STD_MAX_SIZE_5700;
else
- val = RX_STD_MAX_SIZE_5717;
+ val = TG3_RX_STD_MAX_SIZE_5717;
val <<= BDINFO_FLAGS_MAXLEN_SHIFT;
val |= (TG3_RX_STD_DMA_SZ << 2);
} else
val = TG3_RX_STD_DMA_SZ << BDINFO_FLAGS_MAXLEN_SHIFT;
} else
- val = RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT;
+ val = TG3_RX_STD_MAX_SIZE_5700 << BDINFO_FLAGS_MAXLEN_SHIFT;
tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, val);
tpr->rx_std_prod_idx = tp->rx_pending;
tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, tpr->rx_std_prod_idx);
- tpr->rx_jmb_prod_idx = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
- tp->rx_jumbo_pending : 0;
+ tpr->rx_jmb_prod_idx =
+ tg3_flag(tp, JUMBO_RING_ENABLE) ? tp->rx_jumbo_pending : 0;
tw32_rx_mbox(TG3_RX_JMB_PROD_IDX_REG, tpr->rx_jmb_prod_idx);
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
- tw32(STD_REPLENISH_LWM, 32);
- tw32(JMB_REPLENISH_LWM, 16);
- }
-
tg3_rings_reset(tp);
/* Initialize MAC address and backoff seed. */
@@ -8165,10 +8254,16 @@
/* The slot time is changed by tg3_setup_phy if we
* run at gigabit with half duplex.
*/
- tw32(MAC_TX_LENGTHS,
- (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
- (6 << TX_LENGTHS_IPG_SHIFT) |
- (32 << TX_LENGTHS_SLOT_TIME_SHIFT));
+ val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
+ (6 << TX_LENGTHS_IPG_SHIFT) |
+ (32 << TX_LENGTHS_SLOT_TIME_SHIFT);
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+ val |= tr32(MAC_TX_LENGTHS) &
+ (TX_LENGTHS_JMB_FRM_LEN_MSK |
+ TX_LENGTHS_CNT_DWN_VAL_MSK);
+
+ tw32(MAC_TX_LENGTHS, val);
/* Receive rules. */
tw32(MAC_RCV_RULE_CFG, RCV_RULE_CFG_DEFAULT_CLASS);
@@ -8195,33 +8290,39 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
- if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE &&
+ if (tg3_flag(tp, TSO_CAPABLE) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
rdmac_mode |= RDMAC_MODE_FIFO_SIZE_128;
} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
- !(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
+ !tg3_flag(tp, IS_5788)) {
rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
}
}
- if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
+ if (tg3_flag(tp, PCI_EXPRESS))
rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3))
rdmac_mode |= RDMAC_MODE_IPV4_LSO_EN;
- if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+ if (tg3_flag(tp, 57765_PLUS) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+ rdmac_mode |= tr32(RDMAC_MODE) & RDMAC_MODE_H2BNC_VLAN_DET;
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
- (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+ tg3_flag(tp, 57765_PLUS)) {
val = tr32(TG3_RDMA_RSRVCTRL_REG);
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
val &= ~(TG3_RDMA_RSRVCTRL_TXMRGN_MASK |
TG3_RDMA_RSRVCTRL_FIFO_LWM_MASK |
TG3_RDMA_RSRVCTRL_FIFO_HWM_MASK);
@@ -8233,7 +8334,8 @@
val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
}
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val |
TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K |
@@ -8241,12 +8343,12 @@
}
/* Receive/send statistics. */
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
+ if (tg3_flag(tp, 5750_PLUS)) {
val = tr32(RCVLPC_STATS_ENABLE);
val &= ~RCVLPC_STATSENAB_DACK_FIX;
tw32(RCVLPC_STATS_ENABLE, val);
} else if ((rdmac_mode & RDMAC_MODE_FIFO_SIZE_128) &&
- (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+ tg3_flag(tp, TSO_CAPABLE)) {
val = tr32(RCVLPC_STATS_ENABLE);
val &= ~RCVLPC_STATSENAB_LNGBRST_RFIX;
tw32(RCVLPC_STATS_ENABLE, val);
@@ -8269,7 +8371,7 @@
__tg3_set_coalesce(tp, &tp->coal);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
/* Status/statistics block address. See tg3_timer,
* the tg3_periodic_fetch_stats call there, and
* tg3_get_stats to see how this works for 5705/5750 chips.
@@ -8295,7 +8397,7 @@
tw32(RCVCC_MODE, RCVCC_MODE_ENABLE | RCVCC_MODE_ATTN_ENABLE);
tw32(RCVLPC_MODE, RCVLPC_MODE_ENABLE);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
tw32(RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE);
if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
@@ -8305,13 +8407,13 @@
udelay(10);
}
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
else
tp->mac_mode = 0;
tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+ if (!tg3_flag(tp, 5705_PLUS) &&
!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
tp->mac_mode |= MAC_MODE_LINK_POLARITY;
@@ -8319,12 +8421,12 @@
udelay(40);
/* tp->grc_local_ctrl is partially set up during tg3_get_invariants().
- * If TG3_FLG2_IS_NIC is zero, we should read the
+ * If TG3_FLAG_IS_NIC is zero, we should read the
* register to preserve the GPIO settings for LOMs. The GPIOs,
* whether used as inputs or outputs, are set by boot code after
* reset.
*/
- if (!(tp->tg3_flags2 & TG3_FLG2_IS_NIC)) {
+ if (!tg3_flag(tp, IS_NIC)) {
u32 gpio_mask;
gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 |
@@ -8342,21 +8444,20 @@
tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
/* GPIO1 must be driven high for eeprom write protect */
- if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)
+ if (tg3_flag(tp, EEPROM_WRITE_PROT))
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
}
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
- if ((tp->tg3_flags2 & TG3_FLG2_USING_MSIX) &&
- tp->irq_cnt > 1) {
+ if (tg3_flag(tp, USING_MSIX) && tp->irq_cnt > 1) {
val = tr32(MSGINT_MODE);
val |= MSGINT_MODE_MULTIVEC_EN | MSGINT_MODE_ENABLE;
tw32(MSGINT_MODE, val);
}
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
udelay(40);
}
@@ -8369,18 +8470,18 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
- if ((tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
+ if (tg3_flag(tp, TSO_CAPABLE) &&
(tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 ||
tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) {
/* nothing */
} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
- !(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
+ !tg3_flag(tp, IS_5788)) {
val |= WDMAC_MODE_RX_ACCEL;
}
}
/* Enable host coalescing bug fix */
- if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+ if (tg3_flag(tp, 5755_PLUS))
val |= WDMAC_MODE_STATUS_TAG_FIX;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
@@ -8389,7 +8490,7 @@
tw32_f(WDMAC_MODE, val);
udelay(40);
- if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+ if (tg3_flag(tp, PCIX_MODE)) {
u16 pcix_cmd;
pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
@@ -8409,7 +8510,7 @@
udelay(40);
tw32(RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
tw32(MBFREE_MODE, MBFREE_MODE_ENABLE);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
@@ -8421,15 +8522,16 @@
tw32(SNDBDC_MODE, SNDBDC_MODE_ENABLE | SNDBDC_MODE_ATTN_ENABLE);
tw32(RCVBDI_MODE, RCVBDI_MODE_ENABLE | RCVBDI_MODE_RCB_ATTN_ENAB);
val = RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+ if (tg3_flag(tp, LRG_PROD_RING_CAP))
val |= RCVDBDI_MODE_LRG_RING_SZ;
tw32(RCVDBDI_MODE, val);
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3))
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
val = SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE;
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+ if (tg3_flag(tp, ENABLE_TSS))
val |= SNDBDI_MODE_MULTI_TXQ_EN;
tw32(SNDBDI_MODE, val);
tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
@@ -8440,20 +8542,28 @@
return err;
}
- if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
+ if (tg3_flag(tp, TSO_CAPABLE)) {
err = tg3_load_tso_firmware(tp);
if (err)
return err;
}
tp->tx_mode = TX_MODE_ENABLE;
- if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+
+ if (tg3_flag(tp, 5755_PLUS) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tp->tx_mode |= TX_MODE_MBUF_LOCKUP_FIX;
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+ val = TX_MODE_JMB_FRM_LEN | TX_MODE_CNT_DN_MODE;
+ tp->tx_mode &= ~val;
+ tp->tx_mode |= tr32(MAC_TX_MODE) & val;
+ }
+
tw32_f(MAC_TX_MODE, tp->tx_mode);
udelay(100);
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) {
+ if (tg3_flag(tp, ENABLE_RSS)) {
u32 reg = MAC_RSS_INDIR_TBL_0;
u8 *ent = (u8 *)&val;
@@ -8482,10 +8592,10 @@
}
tp->rx_mode = RX_MODE_ENABLE;
- if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+ if (tg3_flag(tp, 5755_PLUS))
tp->rx_mode |= RX_MODE_IPV6_CSUM_ENABLE;
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)
+ if (tg3_flag(tp, ENABLE_RSS))
tp->rx_mode |= RX_MODE_RSS_ENABLE |
RX_MODE_RSS_ITBL_HASH_BITS_7 |
RX_MODE_RSS_IPV6_HASH_EN |
@@ -8532,11 +8642,11 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
/* Use hardware link auto-negotiation */
- tp->tg3_flags2 |= TG3_FLG2_HW_AUTONEG;
+ tg3_flag_set(tp, HW_AUTONEG);
}
if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) {
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
u32 tmp;
tmp = tr32(SERDES_RX_CTRL);
@@ -8546,7 +8656,7 @@
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
}
- if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
+ if (!tg3_flag(tp, USE_PHYLIB)) {
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
tp->link_config.speed = tp->link_config.orig_speed;
@@ -8579,12 +8689,11 @@
tw32(MAC_RCV_RULE_1, 0x86000004 & RCV_RULE_DISABLE_MASK);
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
- if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
+ if (tg3_flag(tp, 5705_PLUS) && !tg3_flag(tp, 5780_CLASS))
limit = 8;
else
limit = 16;
- if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
+ if (tg3_flag(tp, ENABLE_ASF))
limit -= 4;
switch (limit) {
case 16:
@@ -8622,7 +8731,7 @@
break;
}
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
/* Write our heartbeat update interval to APE. */
tg3_ape_write32(tp, TG3_APE_HOST_HEARTBEAT_INT_MS,
APE_HOST_HEARTBEAT_INT_DISABLE);
@@ -8688,7 +8797,21 @@
TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
- TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+ tp->pci_chip_rev_id != CHIPREV_ID_5719_A0 &&
+ tp->pci_chip_rev_id != CHIPREV_ID_5720_A0) {
+ TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+ } else {
+ u32 val = tr32(HOSTCC_FLOW_ATTN);
+ val = (val & HOSTCC_FLOW_ATTN_MBUF_LWM) ? 1 : 0;
+ if (val) {
+ tw32(HOSTCC_FLOW_ATTN, HOSTCC_FLOW_ATTN_MBUF_LWM);
+ sp->rx_discards.low += val;
+ if (sp->rx_discards.low < val)
+ sp->rx_discards.high += 1;
+ }
+ sp->mbuf_lwm_thresh_hit = sp->rx_discards;
+ }
TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
}
@@ -8701,7 +8824,7 @@
spin_lock(&tp->lock);
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ if (!tg3_flag(tp, TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
* uses with the cpu is race prone.
@@ -8715,7 +8838,7 @@
}
if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
- tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER;
+ tg3_flag_set(tp, RESTART_TIMER);
spin_unlock(&tp->lock);
schedule_work(&tp->reset_task);
return;
@@ -8724,16 +8847,13 @@
/* This part only runs once per second. */
if (!--tp->timer_counter) {
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ if (tg3_flag(tp, 5705_PLUS))
tg3_periodic_fetch_stats(tp);
- if (tp->setlpicnt && !--tp->setlpicnt) {
- u32 val = tr32(TG3_CPMU_EEE_MODE);
- tw32(TG3_CPMU_EEE_MODE,
- val | TG3_CPMU_EEEMD_LPI_ENABLE);
- }
+ if (tp->setlpicnt && !--tp->setlpicnt)
+ tg3_phy_eee_enable(tp);
- if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
+ if (tg3_flag(tp, USE_LINKCHG_REG)) {
u32 mac_stat;
int phy_event;
@@ -8748,7 +8868,7 @@
if (phy_event)
tg3_setup_phy(tp, 0);
- } else if (tp->tg3_flags & TG3_FLAG_POLL_SERDES) {
+ } else if (tg3_flag(tp, POLL_SERDES)) {
u32 mac_stat = tr32(MAC_STATUS);
int need_setup = 0;
@@ -8773,7 +8893,7 @@
tg3_setup_phy(tp, 0);
}
} else if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) &&
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ tg3_flag(tp, 5780_CLASS)) {
tg3_serdes_parallel_detect(tp);
}
@@ -8798,8 +8918,7 @@
* resets.
*/
if (!--tp->asf_counter) {
- if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
- !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
+ if (tg3_flag(tp, ENABLE_ASF) && !tg3_flag(tp, ENABLE_APE)) {
tg3_wait_for_event_ack(tp);
tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
@@ -8835,16 +8954,16 @@
name[IFNAMSIZ-1] = 0;
}
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI_OR_MSIX) {
+ if (tg3_flag(tp, USING_MSI) || tg3_flag(tp, USING_MSIX)) {
fn = tg3_msi;
- if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
+ if (tg3_flag(tp, 1SHOT_MSI))
fn = tg3_msi_1shot;
- flags = IRQF_SAMPLE_RANDOM;
+ flags = 0;
} else {
fn = tg3_interrupt;
- if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ if (tg3_flag(tp, TAGGED_STATUS))
fn = tg3_interrupt_tagged;
- flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
+ flags = IRQF_SHARED;
}
return request_irq(tnapi->irq_vec, fn, flags, name, tnapi);
@@ -8868,8 +8987,7 @@
* Turn off MSI one shot mode. Otherwise this test has no
* observable way to know whether the interrupt was delivered.
*/
- if ((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
- (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+ if (tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) {
val = tr32(MSGINT_MODE) | MSGINT_MODE_ONE_SHOT_DISABLE;
tw32(MSGINT_MODE, val);
}
@@ -8911,8 +9029,7 @@
if (intr_ok) {
/* Reenable MSI one shot mode. */
- if ((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
- (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+ if (tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) {
val = tr32(MSGINT_MODE) & ~MSGINT_MODE_ONE_SHOT_DISABLE;
tw32(MSGINT_MODE, val);
}
@@ -8930,7 +9047,7 @@
int err;
u16 pci_cmd;
- if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSI))
+ if (!tg3_flag(tp, USING_MSI))
return 0;
/* Turn off SERR reporting in case MSI terminates with Master
@@ -8960,7 +9077,7 @@
pci_disable_msi(tp->pdev);
- tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
+ tg3_flag_clear(tp, USING_MSI);
tp->napi[0].irq_vec = tp->pdev->irq;
err = tg3_request_irq(tp, 0);
@@ -9057,9 +9174,11 @@
}
if (tp->irq_cnt > 1) {
- tp->tg3_flags3 |= TG3_FLG3_ENABLE_RSS;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
- tp->tg3_flags3 |= TG3_FLG3_ENABLE_TSS;
+ tg3_flag_set(tp, ENABLE_RSS);
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+ tg3_flag_set(tp, ENABLE_TSS);
netif_set_real_num_tx_queues(tp->dev, tp->irq_cnt - 1);
}
}
@@ -9069,8 +9188,8 @@
static void tg3_ints_init(struct tg3 *tp)
{
- if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSI_OR_MSIX) &&
- !(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ if ((tg3_flag(tp, SUPPORT_MSI) || tg3_flag(tp, SUPPORT_MSIX)) &&
+ !tg3_flag(tp, TAGGED_STATUS)) {
/* All MSI supporting chips should support tagged
* status. Assert that this is the case.
*/
@@ -9079,21 +9198,19 @@
goto defcfg;
}
- if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) && tg3_enable_msix(tp))
- tp->tg3_flags2 |= TG3_FLG2_USING_MSIX;
- else if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSI) &&
- pci_enable_msi(tp->pdev) == 0)
- tp->tg3_flags2 |= TG3_FLG2_USING_MSI;
+ if (tg3_flag(tp, SUPPORT_MSIX) && tg3_enable_msix(tp))
+ tg3_flag_set(tp, USING_MSIX);
+ else if (tg3_flag(tp, SUPPORT_MSI) && pci_enable_msi(tp->pdev) == 0)
+ tg3_flag_set(tp, USING_MSI);
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI_OR_MSIX) {
+ if (tg3_flag(tp, USING_MSI) || tg3_flag(tp, USING_MSIX)) {
u32 msi_mode = tr32(MSGINT_MODE);
- if ((tp->tg3_flags2 & TG3_FLG2_USING_MSIX) &&
- tp->irq_cnt > 1)
+ if (tg3_flag(tp, USING_MSIX) && tp->irq_cnt > 1)
msi_mode |= MSGINT_MODE_MULTIVEC_EN;
tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE);
}
defcfg:
- if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
+ if (!tg3_flag(tp, USING_MSIX)) {
tp->irq_cnt = 1;
tp->napi[0].irq_vec = tp->pdev->irq;
netif_set_real_num_tx_queues(tp->dev, 1);
@@ -9103,12 +9220,14 @@
static void tg3_ints_fini(struct tg3 *tp)
{
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+ if (tg3_flag(tp, USING_MSIX))
pci_disable_msix(tp->pdev);
- else if (tp->tg3_flags2 & TG3_FLG2_USING_MSI)
+ else if (tg3_flag(tp, USING_MSI))
pci_disable_msi(tp->pdev);
- tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI_OR_MSIX;
- tp->tg3_flags3 &= ~(TG3_FLG3_ENABLE_RSS | TG3_FLG3_ENABLE_TSS);
+ tg3_flag_clear(tp, USING_MSI);
+ tg3_flag_clear(tp, USING_MSIX);
+ tg3_flag_clear(tp, ENABLE_RSS);
+ tg3_flag_clear(tp, ENABLE_TSS);
}
static int tg3_open(struct net_device *dev)
@@ -9123,10 +9242,10 @@
return err;
} else if (err) {
netdev_warn(tp->dev, "TSO capability disabled\n");
- tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
- } else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+ tg3_flag_clear(tp, TSO_CAPABLE);
+ } else if (!tg3_flag(tp, TSO_CAPABLE)) {
netdev_notice(tp->dev, "TSO capability restored\n");
- tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+ tg3_flag_set(tp, TSO_CAPABLE);
}
}
@@ -9139,7 +9258,7 @@
tg3_full_lock(tp, 0);
tg3_disable_ints(tp);
- tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_clear(tp, INIT_COMPLETE);
tg3_full_unlock(tp);
@@ -9180,7 +9299,7 @@
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
} else {
- if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ if (tg3_flag(tp, TAGGED_STATUS))
tp->timer_offset = HZ;
else
tp->timer_offset = HZ / 10;
@@ -9202,7 +9321,7 @@
if (err)
goto err_out3;
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+ if (tg3_flag(tp, USING_MSI)) {
err = tg3_test_msi(tp);
if (err) {
@@ -9214,8 +9333,7 @@
goto err_out2;
}
- if (!(tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
- (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+ if (!tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) {
u32 val = tr32(PCIE_TRANSACTION_CFG);
tw32(PCIE_TRANSACTION_CFG,
@@ -9228,13 +9346,20 @@
tg3_full_lock(tp, 0);
add_timer(&tp->timer);
- tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_set(tp, INIT_COMPLETE);
tg3_enable_ints(tp);
tg3_full_unlock(tp);
netif_tx_start_all_queues(dev);
+ /*
+ * Reset loopback feature if it was turned on while the device was down
+ * make sure that it's installed properly now.
+ */
+ if (dev->features & NETIF_F_LOOPBACK)
+ tg3_set_loopback(dev, dev->features);
+
return 0;
err_out3:
@@ -9277,7 +9402,7 @@
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
- tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_clear(tp, INIT_COMPLETE);
tg3_full_unlock(tp);
@@ -9424,6 +9549,8 @@
ESTAT_ADD(nic_avoided_irqs);
ESTAT_ADD(nic_tx_threshold_hit);
+ ESTAT_ADD(mbuf_lwm_thresh_hit);
+
return estats;
}
@@ -9534,7 +9661,7 @@
/* When ASF is in use, we always keep the RX_MODE_KEEP_VLAN_TAG
* flag clear.
*/
- if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (!tg3_flag(tp, ENABLE_ASF))
rx_mode |= RX_MODE_KEEP_VLAN_TAG;
#endif
@@ -9588,82 +9715,26 @@
tg3_full_unlock(tp);
}
-#define TG3_REGDUMP_LEN (32 * 1024)
-
static int tg3_get_regs_len(struct net_device *dev)
{
- return TG3_REGDUMP_LEN;
+ return TG3_REG_BLK_SIZE;
}
static void tg3_get_regs(struct net_device *dev,
struct ethtool_regs *regs, void *_p)
{
- u32 *p = _p;
struct tg3 *tp = netdev_priv(dev);
- u8 *orig_p = _p;
- int i;
regs->version = 0;
- memset(p, 0, TG3_REGDUMP_LEN);
+ memset(_p, 0, TG3_REG_BLK_SIZE);
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return;
tg3_full_lock(tp, 0);
-#define __GET_REG32(reg) (*(p)++ = tr32(reg))
-#define GET_REG32_LOOP(base, len) \
-do { p = (u32 *)(orig_p + (base)); \
- for (i = 0; i < len; i += 4) \
- __GET_REG32((base) + i); \
-} while (0)
-#define GET_REG32_1(reg) \
-do { p = (u32 *)(orig_p + (reg)); \
- __GET_REG32((reg)); \
-} while (0)
-
- GET_REG32_LOOP(TG3PCI_VENDOR, 0xb0);
- GET_REG32_LOOP(MAILBOX_INTERRUPT_0, 0x200);
- GET_REG32_LOOP(MAC_MODE, 0x4f0);
- GET_REG32_LOOP(SNDDATAI_MODE, 0xe0);
- GET_REG32_1(SNDDATAC_MODE);
- GET_REG32_LOOP(SNDBDS_MODE, 0x80);
- GET_REG32_LOOP(SNDBDI_MODE, 0x48);
- GET_REG32_1(SNDBDC_MODE);
- GET_REG32_LOOP(RCVLPC_MODE, 0x20);
- GET_REG32_LOOP(RCVLPC_SELLST_BASE, 0x15c);
- GET_REG32_LOOP(RCVDBDI_MODE, 0x0c);
- GET_REG32_LOOP(RCVDBDI_JUMBO_BD, 0x3c);
- GET_REG32_LOOP(RCVDBDI_BD_PROD_IDX_0, 0x44);
- GET_REG32_1(RCVDCC_MODE);
- GET_REG32_LOOP(RCVBDI_MODE, 0x20);
- GET_REG32_LOOP(RCVCC_MODE, 0x14);
- GET_REG32_LOOP(RCVLSC_MODE, 0x08);
- GET_REG32_1(MBFREE_MODE);
- GET_REG32_LOOP(HOSTCC_MODE, 0x100);
- GET_REG32_LOOP(MEMARB_MODE, 0x10);
- GET_REG32_LOOP(BUFMGR_MODE, 0x58);
- GET_REG32_LOOP(RDMAC_MODE, 0x08);
- GET_REG32_LOOP(WDMAC_MODE, 0x08);
- GET_REG32_1(RX_CPU_MODE);
- GET_REG32_1(RX_CPU_STATE);
- GET_REG32_1(RX_CPU_PGMCTR);
- GET_REG32_1(RX_CPU_HWBKPT);
- GET_REG32_1(TX_CPU_MODE);
- GET_REG32_1(TX_CPU_STATE);
- GET_REG32_1(TX_CPU_PGMCTR);
- GET_REG32_LOOP(GRCMBOX_INTERRUPT_0, 0x110);
- GET_REG32_LOOP(FTQ_RESET, 0x120);
- GET_REG32_LOOP(MSGINT_MODE, 0x0c);
- GET_REG32_1(DMAC_MODE);
- GET_REG32_LOOP(GRC_MODE, 0x4c);
- if (tp->tg3_flags & TG3_FLAG_NVRAM)
- GET_REG32_LOOP(NVRAM_CMD, 0x24);
-
-#undef __GET_REG32
-#undef GET_REG32_LOOP
-#undef GET_REG32_1
+ tg3_dump_legacy_regs(tp, (u32 *)_p);
tg3_full_unlock(tp);
}
@@ -9683,7 +9754,7 @@
u32 i, offset, len, b_offset, b_count;
__be32 val;
- if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+ if (tg3_flag(tp, NO_NVRAM))
return -EINVAL;
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
@@ -9751,7 +9822,7 @@
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
- if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+ if (tg3_flag(tp, NO_NVRAM) ||
eeprom->magic != TG3_EEPROM_MAGIC)
return -EINVAL;
@@ -9803,7 +9874,7 @@
{
struct tg3 *tp = netdev_priv(dev);
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
@@ -9831,10 +9902,10 @@
cmd->advertising = tp->link_config.advertising;
if (netif_running(dev)) {
- cmd->speed = tp->link_config.active_speed;
+ ethtool_cmd_speed_set(cmd, tp->link_config.active_speed);
cmd->duplex = tp->link_config.active_duplex;
} else {
- cmd->speed = SPEED_INVALID;
+ ethtool_cmd_speed_set(cmd, SPEED_INVALID);
cmd->duplex = DUPLEX_INVALID;
}
cmd->phy_address = tp->phy_addr;
@@ -9848,8 +9919,9 @@
static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct tg3 *tp = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
@@ -9897,14 +9969,14 @@
cmd->advertising &= mask;
} else {
if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES) {
- if (cmd->speed != SPEED_1000)
+ if (speed != SPEED_1000)
return -EINVAL;
if (cmd->duplex != DUPLEX_FULL)
return -EINVAL;
} else {
- if (cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10)
+ if (speed != SPEED_100 &&
+ speed != SPEED_10)
return -EINVAL;
}
}
@@ -9919,7 +9991,7 @@
tp->link_config.duplex = DUPLEX_INVALID;
} else {
tp->link_config.advertising = 0;
- tp->link_config.speed = cmd->speed;
+ tp->link_config.speed = speed;
tp->link_config.duplex = cmd->duplex;
}
@@ -9949,14 +10021,12 @@
{
struct tg3 *tp = netdev_priv(dev);
- if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
- device_can_wakeup(&tp->pdev->dev))
+ if (tg3_flag(tp, WOL_CAP) && device_can_wakeup(&tp->pdev->dev))
wol->supported = WAKE_MAGIC;
else
wol->supported = 0;
wol->wolopts = 0;
- if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
- device_can_wakeup(&tp->pdev->dev))
+ if (tg3_flag(tp, WOL_ENABLE) && device_can_wakeup(&tp->pdev->dev))
wol->wolopts = WAKE_MAGIC;
memset(&wol->sopass, 0, sizeof(wol->sopass));
}
@@ -9969,19 +10039,18 @@
if (wol->wolopts & ~WAKE_MAGIC)
return -EINVAL;
if ((wol->wolopts & WAKE_MAGIC) &&
- !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp)))
+ !(tg3_flag(tp, WOL_CAP) && device_can_wakeup(dp)))
return -EINVAL;
device_set_wakeup_enable(dp, wol->wolopts & WAKE_MAGIC);
spin_lock_bh(&tp->lock);
if (device_may_wakeup(dp))
- tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
+ tg3_flag_set(tp, WOL_ENABLE);
else
- tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
+ tg3_flag_clear(tp, WOL_ENABLE);
spin_unlock_bh(&tp->lock);
-
return 0;
}
@@ -9997,33 +10066,6 @@
tp->msg_enable = value;
}
-static int tg3_set_tso(struct net_device *dev, u32 value)
-{
- struct tg3 *tp = netdev_priv(dev);
-
- if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
- if (value)
- return -EINVAL;
- return 0;
- }
- if ((dev->features & NETIF_F_IPV6_CSUM) &&
- ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
- (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3))) {
- if (value) {
- dev->features |= NETIF_F_TSO6;
- if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
- GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
- dev->features |= NETIF_F_TSO_ECN;
- } else
- dev->features &= ~(NETIF_F_TSO6 | NETIF_F_TSO_ECN);
- }
- return ethtool_op_set_tso(dev, value);
-}
-
static int tg3_nway_reset(struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
@@ -10035,7 +10077,7 @@
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
return -EINVAL;
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
@@ -10064,7 +10106,7 @@
ering->rx_max_pending = tp->rx_std_ring_mask;
ering->rx_mini_max_pending = 0;
- if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE)
+ if (tg3_flag(tp, JUMBO_RING_ENABLE))
ering->rx_jumbo_max_pending = tp->rx_jmb_ring_mask;
else
ering->rx_jumbo_max_pending = 0;
@@ -10073,7 +10115,7 @@
ering->rx_pending = tp->rx_pending;
ering->rx_mini_pending = 0;
- if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE)
+ if (tg3_flag(tp, JUMBO_RING_ENABLE))
ering->rx_jumbo_pending = tp->rx_jumbo_pending;
else
ering->rx_jumbo_pending = 0;
@@ -10090,7 +10132,7 @@
(ering->rx_jumbo_pending > tp->rx_jmb_ring_mask) ||
(ering->tx_pending > TG3_TX_RING_SIZE - 1) ||
(ering->tx_pending <= MAX_SKB_FRAGS) ||
- ((tp->tg3_flags2 & TG3_FLG2_TSO_BUG) &&
+ (tg3_flag(tp, TSO_BUG) &&
(ering->tx_pending <= (MAX_SKB_FRAGS * 3))))
return -EINVAL;
@@ -10104,7 +10146,7 @@
tp->rx_pending = ering->rx_pending;
- if ((tp->tg3_flags2 & TG3_FLG2_MAX_RXPEND_64) &&
+ if (tg3_flag(tp, MAX_RXPEND_64) &&
tp->rx_pending > 63)
tp->rx_pending = 63;
tp->rx_jumbo_pending = ering->rx_jumbo_pending;
@@ -10131,7 +10173,7 @@
{
struct tg3 *tp = netdev_priv(dev);
- epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
+ epause->autoneg = !!tg3_flag(tp, PAUSE_AUTONEG);
if (tp->link_config.active_flowctrl & FLOW_CTRL_RX)
epause->rx_pause = 1;
@@ -10149,7 +10191,7 @@
struct tg3 *tp = netdev_priv(dev);
int err = 0;
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
u32 newadv;
struct phy_device *phydev;
@@ -10177,9 +10219,9 @@
newadv = 0;
if (epause->autoneg)
- tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tg3_flag_set(tp, PAUSE_AUTONEG);
else
- tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
+ tg3_flag_clear(tp, PAUSE_AUTONEG);
if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
u32 oldadv = phydev->advertising &
@@ -10221,9 +10263,9 @@
tg3_full_lock(tp, irq_sync);
if (epause->autoneg)
- tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tg3_flag_set(tp, PAUSE_AUTONEG);
else
- tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
+ tg3_flag_clear(tp, PAUSE_AUTONEG);
if (epause->rx_pause)
tp->link_config.flowctrl |= FLOW_CTRL_RX;
else
@@ -10246,50 +10288,6 @@
return err;
}
-static u32 tg3_get_rx_csum(struct net_device *dev)
-{
- struct tg3 *tp = netdev_priv(dev);
- return (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0;
-}
-
-static int tg3_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct tg3 *tp = netdev_priv(dev);
-
- if (tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) {
- if (data != 0)
- return -EINVAL;
- return 0;
- }
-
- spin_lock_bh(&tp->lock);
- if (data)
- tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
- else
- tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
- spin_unlock_bh(&tp->lock);
-
- return 0;
-}
-
-static int tg3_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct tg3 *tp = netdev_priv(dev);
-
- if (tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) {
- if (data != 0)
- return -EINVAL;
- return 0;
- }
-
- if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
- ethtool_op_set_tx_ipv6_csum(dev, data);
- else
- ethtool_op_set_tx_csum(dev, data);
-
- return 0;
-}
-
static int tg3_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
@@ -10317,35 +10315,38 @@
}
}
-static int tg3_phys_id(struct net_device *dev, u32 data)
+static int tg3_set_phys_id(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct tg3 *tp = netdev_priv(dev);
- int i;
if (!netif_running(tp->dev))
return -EAGAIN;
- if (data == 0)
- data = UINT_MAX / 2;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
- for (i = 0; i < (data * 2); i++) {
- if ((i % 2) == 0)
- tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
- LED_CTRL_1000MBPS_ON |
- LED_CTRL_100MBPS_ON |
- LED_CTRL_10MBPS_ON |
- LED_CTRL_TRAFFIC_OVERRIDE |
- LED_CTRL_TRAFFIC_BLINK |
- LED_CTRL_TRAFFIC_LED);
+ case ETHTOOL_ID_ON:
+ tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+ LED_CTRL_1000MBPS_ON |
+ LED_CTRL_100MBPS_ON |
+ LED_CTRL_10MBPS_ON |
+ LED_CTRL_TRAFFIC_OVERRIDE |
+ LED_CTRL_TRAFFIC_BLINK |
+ LED_CTRL_TRAFFIC_LED);
+ break;
- else
- tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
- LED_CTRL_TRAFFIC_OVERRIDE);
+ case ETHTOOL_ID_OFF:
+ tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+ LED_CTRL_TRAFFIC_OVERRIDE);
+ break;
- if (msleep_interruptible(500))
- break;
+ case ETHTOOL_ID_INACTIVE:
+ tw32(MAC_LED_CTRL, tp->led_ctrl);
+ break;
}
- tw32(MAC_LED_CTRL, tp->led_ctrl);
+
return 0;
}
@@ -10356,6 +10357,80 @@
memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats));
}
+static __be32 * tg3_vpd_readblock(struct tg3 *tp)
+{
+ int i;
+ __be32 *buf;
+ u32 offset = 0, len = 0;
+ u32 magic, val;
+
+ if (tg3_flag(tp, NO_NVRAM) || tg3_nvram_read(tp, 0, &magic))
+ return NULL;
+
+ if (magic == TG3_EEPROM_MAGIC) {
+ for (offset = TG3_NVM_DIR_START;
+ offset < TG3_NVM_DIR_END;
+ offset += TG3_NVM_DIRENT_SIZE) {
+ if (tg3_nvram_read(tp, offset, &val))
+ return NULL;
+
+ if ((val >> TG3_NVM_DIRTYPE_SHIFT) ==
+ TG3_NVM_DIRTYPE_EXTVPD)
+ break;
+ }
+
+ if (offset != TG3_NVM_DIR_END) {
+ len = (val & TG3_NVM_DIRTYPE_LENMSK) * 4;
+ if (tg3_nvram_read(tp, offset + 4, &offset))
+ return NULL;
+
+ offset = tg3_nvram_logical_addr(tp, offset);
+ }
+ }
+
+ if (!offset || !len) {
+ offset = TG3_NVM_VPD_OFF;
+ len = TG3_NVM_VPD_LEN;
+ }
+
+ buf = kmalloc(len, GFP_KERNEL);
+ if (buf == NULL)
+ return NULL;
+
+ if (magic == TG3_EEPROM_MAGIC) {
+ for (i = 0; i < len; i += 4) {
+ /* The data is in little-endian format in NVRAM.
+ * Use the big-endian read routines to preserve
+ * the byte order as it exists in NVRAM.
+ */
+ if (tg3_nvram_read_be32(tp, offset + i, &buf[i/4]))
+ goto error;
+ }
+ } else {
+ u8 *ptr;
+ ssize_t cnt;
+ unsigned int pos = 0;
+
+ ptr = (u8 *)&buf[0];
+ for (i = 0; pos < len && i < 3; i++, pos += cnt, ptr += cnt) {
+ cnt = pci_read_vpd(tp->pdev, pos,
+ len - pos, ptr);
+ if (cnt == -ETIMEDOUT || cnt == -EINTR)
+ cnt = 0;
+ else if (cnt < 0)
+ goto error;
+ }
+ if (pos != len)
+ goto error;
+ }
+
+ return buf;
+
+error:
+ kfree(buf);
+ return NULL;
+}
+
#define NVRAM_TEST_SIZE 0x100
#define NVRAM_SELFBOOT_FORMAT1_0_SIZE 0x14
#define NVRAM_SELFBOOT_FORMAT1_2_SIZE 0x18
@@ -10369,7 +10444,7 @@
__be32 *buf;
int i, j, k, err = 0, size;
- if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+ if (tg3_flag(tp, NO_NVRAM))
return 0;
if (tg3_nvram_read(tp, 0, &magic) != 0)
@@ -10495,14 +10570,11 @@
if (csum != le32_to_cpu(buf[0xfc/4]))
goto out;
- for (i = 0; i < TG3_NVM_VPD_LEN; i += 4) {
- /* The data is in little-endian format in NVRAM.
- * Use the big-endian read routines to preserve
- * the byte order as it exists in NVRAM.
- */
- if (tg3_nvram_read_be32(tp, TG3_NVM_VPD_OFF + i, &buf[i/4]))
- goto out;
- }
+ kfree(buf);
+
+ buf = tg3_vpd_readblock(tp);
+ if (!buf)
+ return -ENOMEM;
i = pci_vpd_find_tag((u8 *)buf, 0, TG3_NVM_VPD_LEN,
PCI_VPD_LRDT_RO_DATA);
@@ -10714,9 +10786,9 @@
};
is_5705 = is_5750 = 0;
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ if (tg3_flag(tp, 5705_PLUS)) {
is_5705 = 1;
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
+ if (tg3_flag(tp, 5750_PLUS))
is_5750 = 1;
}
@@ -10727,7 +10799,7 @@
if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705))
continue;
- if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
+ if (tg3_flag(tp, IS_5788) &&
(reg_tbl[i].flags & TG3_FL_NOT_5788))
continue;
@@ -10850,16 +10922,15 @@
int err = 0;
int i;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+ if (tg3_flag(tp, 5717_PLUS))
mem_tbl = mem_tbl_5717;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
mem_tbl = mem_tbl_57765;
- else if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+ else if (tg3_flag(tp, 5755_PLUS))
mem_tbl = mem_tbl_5755;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
mem_tbl = mem_tbl_5906;
- else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ else if (tg3_flag(tp, 5705_PLUS))
mem_tbl = mem_tbl_5705;
else
mem_tbl = mem_tbl_570x;
@@ -10875,11 +10946,35 @@
#define TG3_MAC_LOOPBACK 0
#define TG3_PHY_LOOPBACK 1
+#define TG3_TSO_LOOPBACK 2
-static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
+#define TG3_TSO_MSS 500
+
+#define TG3_TSO_IP_HDR_LEN 20
+#define TG3_TSO_TCP_HDR_LEN 20
+#define TG3_TSO_TCP_OPT_LEN 12
+
+static const u8 tg3_tso_header[] = {
+0x08, 0x00,
+0x45, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x40, 0x00,
+0x40, 0x06, 0x00, 0x00,
+0x0a, 0x00, 0x00, 0x01,
+0x0a, 0x00, 0x00, 0x02,
+0x0d, 0x00, 0xe0, 0x00,
+0x00, 0x00, 0x01, 0x00,
+0x00, 0x00, 0x02, 0x00,
+0x80, 0x10, 0x10, 0x00,
+0x14, 0x09, 0x00, 0x00,
+0x01, 0x01, 0x08, 0x0a,
+0x11, 0x11, 0x11, 0x11,
+0x11, 0x11, 0x11, 0x11,
+};
+
+static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
{
u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
- u32 desc_idx, coal_now;
+ u32 base_flags = 0, mss = 0, desc_idx, coal_now, data_off, val;
struct sk_buff *skb, *rx_skb;
u8 *tx_data;
dma_addr_t map;
@@ -10891,9 +10986,9 @@
tnapi = &tp->napi[0];
rnapi = &tp->napi[0];
if (tp->irq_cnt > 1) {
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)
+ if (tg3_flag(tp, ENABLE_RSS))
rnapi = &tp->napi[1];
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+ if (tg3_flag(tp, ENABLE_TSS))
tnapi = &tp->napi[1];
}
coal_now = tnapi->coal_now | rnapi->coal_now;
@@ -10905,22 +11000,20 @@
* all newer ASIC revisions.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
- (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT))
+ tg3_flag(tp, CPMU_PRESENT))
return 0;
mac_mode = tp->mac_mode &
~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
mac_mode |= MAC_MODE_PORT_INT_LPBACK;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
mac_mode |= MAC_MODE_LINK_POLARITY;
if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
mac_mode |= MAC_MODE_PORT_MODE_MII;
else
mac_mode |= MAC_MODE_PORT_MODE_GMII;
tw32(MAC_MODE, mac_mode);
- } else if (loopback_mode == TG3_PHY_LOOPBACK) {
- u32 val;
-
+ } else {
if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
tg3_phy_fet_toggle_apd(tp, false);
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
@@ -10968,13 +11061,11 @@
break;
mdelay(1);
}
- } else {
- return -EINVAL;
}
err = -EIO;
- tx_len = 1514;
+ tx_len = pktsz;
skb = netdev_alloc_skb(tp->dev, tx_len);
if (!skb)
return -ENOMEM;
@@ -10983,9 +11074,58 @@
memcpy(tx_data, tp->dev->dev_addr, 6);
memset(tx_data + 6, 0x0, 8);
- tw32(MAC_RX_MTU_SIZE, tx_len + 4);
+ tw32(MAC_RX_MTU_SIZE, tx_len + ETH_FCS_LEN);
- for (i = 14; i < tx_len; i++)
+ if (loopback_mode == TG3_TSO_LOOPBACK) {
+ struct iphdr *iph = (struct iphdr *)&tx_data[ETH_HLEN];
+
+ u32 hdr_len = TG3_TSO_IP_HDR_LEN + TG3_TSO_TCP_HDR_LEN +
+ TG3_TSO_TCP_OPT_LEN;
+
+ memcpy(tx_data + ETH_ALEN * 2, tg3_tso_header,
+ sizeof(tg3_tso_header));
+ mss = TG3_TSO_MSS;
+
+ val = tx_len - ETH_ALEN * 2 - sizeof(tg3_tso_header);
+ num_pkts = DIV_ROUND_UP(val, TG3_TSO_MSS);
+
+ /* Set the total length field in the IP header */
+ iph->tot_len = htons((u16)(mss + hdr_len));
+
+ base_flags = (TXD_FLAG_CPU_PRE_DMA |
+ TXD_FLAG_CPU_POST_DMA);
+
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3)) {
+ struct tcphdr *th;
+ val = ETH_HLEN + TG3_TSO_IP_HDR_LEN;
+ th = (struct tcphdr *)&tx_data[val];
+ th->check = 0;
+ } else
+ base_flags |= TXD_FLAG_TCPUDP_CSUM;
+
+ if (tg3_flag(tp, HW_TSO_3)) {
+ mss |= (hdr_len & 0xc) << 12;
+ if (hdr_len & 0x10)
+ base_flags |= 0x00000010;
+ base_flags |= (hdr_len & 0x3e0) << 5;
+ } else if (tg3_flag(tp, HW_TSO_2))
+ mss |= hdr_len << 9;
+ else if (tg3_flag(tp, HW_TSO_1) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
+ mss |= (TG3_TSO_TCP_OPT_LEN << 9);
+ } else {
+ base_flags |= (TG3_TSO_TCP_OPT_LEN << 10);
+ }
+
+ data_off = ETH_ALEN * 2 + sizeof(tg3_tso_header);
+ } else {
+ num_pkts = 1;
+ data_off = ETH_HLEN;
+ }
+
+ for (i = data_off; i < tx_len; i++)
tx_data[i] = (u8) (i & 0xff);
map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
@@ -11001,12 +11141,10 @@
rx_start_idx = rnapi->hw_status->idx[0].rx_producer;
- num_pkts = 0;
-
- tg3_set_txd(tnapi, tnapi->tx_prod, map, tx_len, 0, 1);
+ tg3_set_txd(tnapi, tnapi->tx_prod, map, tx_len,
+ base_flags, (mss << 1) | 1);
tnapi->tx_prod++;
- num_pkts++;
tw32_tx_mbox(tnapi->prodmbox, tnapi->tx_prod);
tr32_mailbox(tnapi->prodmbox);
@@ -11036,29 +11174,56 @@
if (rx_idx != rx_start_idx + num_pkts)
goto out;
- desc = &rnapi->rx_rcb[rx_start_idx];
- desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
- opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
- if (opaque_key != RXD_OPAQUE_RING_STD)
- goto out;
+ val = data_off;
+ while (rx_idx != rx_start_idx) {
+ desc = &rnapi->rx_rcb[rx_start_idx++];
+ desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
+ opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
- if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
- (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
- goto out;
-
- rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4;
- if (rx_len != tx_len)
- goto out;
-
- rx_skb = tpr->rx_std_buffers[desc_idx].skb;
-
- map = dma_unmap_addr(&tpr->rx_std_buffers[desc_idx], mapping);
- pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE);
-
- for (i = 14; i < tx_len; i++) {
- if (*(rx_skb->data + i) != (u8) (i & 0xff))
+ if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
+ (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
goto out;
+
+ rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT)
+ - ETH_FCS_LEN;
+
+ if (loopback_mode != TG3_TSO_LOOPBACK) {
+ if (rx_len != tx_len)
+ goto out;
+
+ if (pktsz <= TG3_RX_STD_DMA_SZ - ETH_FCS_LEN) {
+ if (opaque_key != RXD_OPAQUE_RING_STD)
+ goto out;
+ } else {
+ if (opaque_key != RXD_OPAQUE_RING_JUMBO)
+ goto out;
+ }
+ } else if ((desc->type_flags & RXD_FLAG_TCPUDP_CSUM) &&
+ (desc->ip_tcp_csum & RXD_TCPCSUM_MASK)
+ >> RXD_TCPCSUM_SHIFT != 0xffff) {
+ goto out;
+ }
+
+ if (opaque_key == RXD_OPAQUE_RING_STD) {
+ rx_skb = tpr->rx_std_buffers[desc_idx].skb;
+ map = dma_unmap_addr(&tpr->rx_std_buffers[desc_idx],
+ mapping);
+ } else if (opaque_key == RXD_OPAQUE_RING_JUMBO) {
+ rx_skb = tpr->rx_jmb_buffers[desc_idx].skb;
+ map = dma_unmap_addr(&tpr->rx_jmb_buffers[desc_idx],
+ mapping);
+ } else
+ goto out;
+
+ pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len,
+ PCI_DMA_FROMDEVICE);
+
+ for (i = data_off; i < rx_len; i++, val++) {
+ if (*(rx_skb->data + i) != (u8) (val & 0xff))
+ goto out;
+ }
}
+
err = 0;
/* tg3_free_rings will unmap and free the rx_skb */
@@ -11066,10 +11231,13 @@
return err;
}
-#define TG3_MAC_LOOPBACK_FAILED 1
-#define TG3_PHY_LOOPBACK_FAILED 2
-#define TG3_LOOPBACK_FAILED (TG3_MAC_LOOPBACK_FAILED | \
- TG3_PHY_LOOPBACK_FAILED)
+#define TG3_STD_LOOPBACK_FAILED 1
+#define TG3_JMB_LOOPBACK_FAILED 2
+#define TG3_TSO_LOOPBACK_FAILED 4
+
+#define TG3_MAC_LOOPBACK_SHIFT 0
+#define TG3_PHY_LOOPBACK_SHIFT 4
+#define TG3_LOOPBACK_FAILED 0x00000077
static int tg3_test_loopback(struct tg3 *tp)
{
@@ -11088,11 +11256,20 @@
goto done;
}
+ if (tg3_flag(tp, ENABLE_RSS)) {
+ int i;
+
+ /* Reroute all rx packets to the 1st queue */
+ for (i = MAC_RSS_INDIR_TBL_0;
+ i < MAC_RSS_INDIR_TBL_0 + TG3_RSS_INDIR_TBL_SIZE; i += 4)
+ tw32(i, 0x0);
+ }
+
/* Turn off gphy autopowerdown. */
if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
tg3_phy_toggle_apd(tp, false);
- if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
+ if (tg3_flag(tp, CPMU_PRESENT)) {
int i;
u32 status;
@@ -11118,10 +11295,14 @@
CPMU_CTRL_LINK_AWARE_MODE));
}
- if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
- err |= TG3_MAC_LOOPBACK_FAILED;
+ if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_MAC_LOOPBACK))
+ err |= TG3_STD_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
- if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
+ if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+ tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_MAC_LOOPBACK))
+ err |= TG3_JMB_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
+
+ if (tg3_flag(tp, CPMU_PRESENT)) {
tw32(TG3_CPMU_CTRL, cpmuctrl);
/* Release the mutex */
@@ -11129,9 +11310,18 @@
}
if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
- !(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
- if (tg3_run_loopback(tp, TG3_PHY_LOOPBACK))
- err |= TG3_PHY_LOOPBACK_FAILED;
+ !tg3_flag(tp, USE_PHYLIB)) {
+ if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_PHY_LOOPBACK))
+ err |= TG3_STD_LOOPBACK_FAILED <<
+ TG3_PHY_LOOPBACK_SHIFT;
+ if (tg3_flag(tp, TSO_CAPABLE) &&
+ tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_TSO_LOOPBACK))
+ err |= TG3_TSO_LOOPBACK_FAILED <<
+ TG3_PHY_LOOPBACK_SHIFT;
+ if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+ tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_PHY_LOOPBACK))
+ err |= TG3_JMB_LOOPBACK_FAILED <<
+ TG3_PHY_LOOPBACK_SHIFT;
}
/* Re-enable gphy autopowerdown. */
@@ -11176,7 +11366,7 @@
tg3_halt(tp, RESET_KIND_SUSPEND, 1);
err = tg3_nvram_lock(tp);
tg3_halt_cpu(tp, RX_CPU_BASE);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
tg3_halt_cpu(tp, TX_CPU_BASE);
if (!err)
tg3_nvram_unlock(tp);
@@ -11206,7 +11396,7 @@
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
if (netif_running(dev)) {
- tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_set(tp, INIT_COMPLETE);
err2 = tg3_restart_hw(tp, 1);
if (!err2)
tg3_netif_start(tp);
@@ -11228,7 +11418,7 @@
struct tg3 *tp = netdev_priv(dev);
int err;
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
@@ -11247,9 +11437,7 @@
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
- !netif_running(dev)))
+ if (!netif_running(dev))
return -EAGAIN;
spin_lock_bh(&tp->lock);
@@ -11265,9 +11453,7 @@
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
- !netif_running(dev)))
+ if (!netif_running(dev))
return -EAGAIN;
spin_lock_bh(&tp->lock);
@@ -11297,7 +11483,7 @@
u32 max_rxcoal_tick_int = 0, max_txcoal_tick_int = 0;
u32 max_stat_coal_ticks = 0, min_stat_coal_ticks = 0;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (!tg3_flag(tp, 5705_PLUS)) {
max_rxcoal_tick_int = MAX_RXCOAL_TICK_INT;
max_txcoal_tick_int = MAX_TXCOAL_TICK_INT;
max_stat_coal_ticks = MAX_STAT_COAL_TICKS;
@@ -11364,14 +11550,9 @@
.set_ringparam = tg3_set_ringparam,
.get_pauseparam = tg3_get_pauseparam,
.set_pauseparam = tg3_set_pauseparam,
- .get_rx_csum = tg3_get_rx_csum,
- .set_rx_csum = tg3_set_rx_csum,
- .set_tx_csum = tg3_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = tg3_set_tso,
.self_test = tg3_self_test,
.get_strings = tg3_get_strings,
- .phys_id = tg3_phys_id,
+ .set_phys_id = tg3_set_phys_id,
.get_ethtool_stats = tg3_get_ethtool_stats,
.get_coalesce = tg3_get_coalesce,
.set_coalesce = tg3_set_coalesce,
@@ -11416,8 +11597,7 @@
{
u32 val;
- if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
- tg3_nvram_read(tp, 0, &val) != 0)
+ if (tg3_flag(tp, NO_NVRAM) || tg3_nvram_read(tp, 0, &val) != 0)
return;
/* Selfboot format */
@@ -11452,19 +11632,19 @@
nvcfg1 = tr32(NVRAM_CFG1);
if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, FLASH);
} else {
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
tw32(NVRAM_CFG1, nvcfg1);
}
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
+ tg3_flag(tp, 5780_CLASS)) {
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
break;
case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
@@ -11473,12 +11653,12 @@
case FLASH_VENDOR_ATMEL_EEPROM:
tp->nvram_jedecnum = JEDEC_ATMEL;
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
break;
case FLASH_VENDOR_ST:
tp->nvram_jedecnum = JEDEC_ST;
tp->nvram_pagesize = ST_M45PEX0_PAGE_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
break;
case FLASH_VENDOR_SAIFUN:
tp->nvram_jedecnum = JEDEC_SAIFUN;
@@ -11493,7 +11673,7 @@
} else {
tp->nvram_jedecnum = JEDEC_ATMEL;
tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
}
}
@@ -11532,29 +11712,29 @@
/* NVRAM protection for TPM */
if (nvcfg1 & (1 << 27))
- tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
+ tg3_flag_set(tp, PROTECTED_NVRAM);
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
case FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
break;
case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
break;
case FLASH_5752VENDOR_ST_M45PE10:
case FLASH_5752VENDOR_ST_M45PE20:
case FLASH_5752VENDOR_ST_M45PE40:
tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
break;
}
- if (tp->tg3_flags2 & TG3_FLG2_FLASH) {
+ if (tg3_flag(tp, FLASH)) {
tg3_nvram_get_pagesize(tp, nvcfg1);
} else {
/* For eeprom, set pagesize to maximum eeprom size */
@@ -11573,7 +11753,7 @@
/* NVRAM protection for TPM */
if (nvcfg1 & (1 << 27)) {
- tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
+ tg3_flag_set(tp, PROTECTED_NVRAM);
protect = 1;
}
@@ -11584,8 +11764,8 @@
case FLASH_5755VENDOR_ATMEL_FLASH_3:
case FLASH_5755VENDOR_ATMEL_FLASH_5:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
tp->nvram_pagesize = 264;
if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
@@ -11602,8 +11782,8 @@
case FLASH_5752VENDOR_ST_M45PE20:
case FLASH_5752VENDOR_ST_M45PE40:
tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
tp->nvram_pagesize = 256;
if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE10)
tp->nvram_size = (protect ?
@@ -11633,7 +11813,7 @@
case FLASH_5787VENDOR_MICRO_EEPROM_64KHZ:
case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
@@ -11644,16 +11824,16 @@
case FLASH_5755VENDOR_ATMEL_FLASH_2:
case FLASH_5755VENDOR_ATMEL_FLASH_3:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
tp->nvram_pagesize = 264;
break;
case FLASH_5752VENDOR_ST_M45PE10:
case FLASH_5752VENDOR_ST_M45PE20:
case FLASH_5752VENDOR_ST_M45PE40:
tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
tp->nvram_pagesize = 256;
break;
}
@@ -11667,7 +11847,7 @@
/* NVRAM protection for TPM */
if (nvcfg1 & (1 << 27)) {
- tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
+ tg3_flag_set(tp, PROTECTED_NVRAM);
protect = 1;
}
@@ -11682,9 +11862,9 @@
case FLASH_5761VENDOR_ATMEL_MDB081D:
case FLASH_5761VENDOR_ATMEL_MDB161D:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
+ tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
tp->nvram_pagesize = 256;
break;
case FLASH_5761VENDOR_ST_A_M45PE20:
@@ -11696,8 +11876,8 @@
case FLASH_5761VENDOR_ST_M_M45PE80:
case FLASH_5761VENDOR_ST_M_M45PE16:
tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
tp->nvram_pagesize = 256;
break;
}
@@ -11737,7 +11917,7 @@
static void __devinit tg3_get_5906_nvram_info(struct tg3 *tp)
{
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
}
@@ -11751,7 +11931,7 @@
case FLASH_5787VENDOR_ATMEL_EEPROM_376KHZ:
case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
@@ -11765,8 +11945,8 @@
case FLASH_57780VENDOR_ATMEL_AT45DB041D:
case FLASH_57780VENDOR_ATMEL_AT45DB041B:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
@@ -11788,8 +11968,8 @@
case FLASH_5752VENDOR_ST_M45PE20:
case FLASH_5752VENDOR_ST_M45PE40:
tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
case FLASH_5752VENDOR_ST_M45PE10:
@@ -11804,13 +11984,13 @@
}
break;
default:
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
+ tg3_flag_set(tp, NO_NVRAM);
return;
}
tg3_nvram_get_pagesize(tp, nvcfg1);
if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+ tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
}
@@ -11824,7 +12004,7 @@
case FLASH_5717VENDOR_ATMEL_EEPROM:
case FLASH_5717VENDOR_MICRO_EEPROM:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
@@ -11838,11 +12018,13 @@
case FLASH_5717VENDOR_ATMEL_ADB021D:
case FLASH_5717VENDOR_ATMEL_45USPT:
tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
case FLASH_5717VENDOR_ATMEL_MDB021D:
+ /* Detect size with tg3_nvram_get_size() */
+ break;
case FLASH_5717VENDOR_ATMEL_ADB021B:
case FLASH_5717VENDOR_ATMEL_ADB021D:
tp->nvram_size = TG3_NVRAM_SIZE_256KB;
@@ -11863,13 +12045,15 @@
case FLASH_5717VENDOR_ST_25USPT:
case FLASH_5717VENDOR_ST_45USPT:
tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
case FLASH_5717VENDOR_ST_M_M25PE20:
- case FLASH_5717VENDOR_ST_A_M25PE20:
case FLASH_5717VENDOR_ST_M_M45PE20:
+ /* Detect size with tg3_nvram_get_size() */
+ break;
+ case FLASH_5717VENDOR_ST_A_M25PE20:
case FLASH_5717VENDOR_ST_A_M45PE20:
tp->nvram_size = TG3_NVRAM_SIZE_256KB;
break;
@@ -11879,13 +12063,125 @@
}
break;
default:
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
+ tg3_flag_set(tp, NO_NVRAM);
return;
}
tg3_nvram_get_pagesize(tp, nvcfg1);
if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+ tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
+}
+
+static void __devinit tg3_get_5720_nvram_info(struct tg3 *tp)
+{
+ u32 nvcfg1, nvmpinstrp;
+
+ nvcfg1 = tr32(NVRAM_CFG1);
+ nvmpinstrp = nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK;
+
+ switch (nvmpinstrp) {
+ case FLASH_5720_EEPROM_HD:
+ case FLASH_5720_EEPROM_LD:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+
+ nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
+ tw32(NVRAM_CFG1, nvcfg1);
+ if (nvmpinstrp == FLASH_5720_EEPROM_HD)
+ tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
+ else
+ tp->nvram_pagesize = ATMEL_AT24C02_CHIP_SIZE;
+ return;
+ case FLASH_5720VENDOR_M_ATMEL_DB011D:
+ case FLASH_5720VENDOR_A_ATMEL_DB011B:
+ case FLASH_5720VENDOR_A_ATMEL_DB011D:
+ case FLASH_5720VENDOR_M_ATMEL_DB021D:
+ case FLASH_5720VENDOR_A_ATMEL_DB021B:
+ case FLASH_5720VENDOR_A_ATMEL_DB021D:
+ case FLASH_5720VENDOR_M_ATMEL_DB041D:
+ case FLASH_5720VENDOR_A_ATMEL_DB041B:
+ case FLASH_5720VENDOR_A_ATMEL_DB041D:
+ case FLASH_5720VENDOR_M_ATMEL_DB081D:
+ case FLASH_5720VENDOR_A_ATMEL_DB081D:
+ case FLASH_5720VENDOR_ATMEL_45USPT:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
+
+ switch (nvmpinstrp) {
+ case FLASH_5720VENDOR_M_ATMEL_DB021D:
+ case FLASH_5720VENDOR_A_ATMEL_DB021B:
+ case FLASH_5720VENDOR_A_ATMEL_DB021D:
+ tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+ break;
+ case FLASH_5720VENDOR_M_ATMEL_DB041D:
+ case FLASH_5720VENDOR_A_ATMEL_DB041B:
+ case FLASH_5720VENDOR_A_ATMEL_DB041D:
+ tp->nvram_size = TG3_NVRAM_SIZE_512KB;
+ break;
+ case FLASH_5720VENDOR_M_ATMEL_DB081D:
+ case FLASH_5720VENDOR_A_ATMEL_DB081D:
+ tp->nvram_size = TG3_NVRAM_SIZE_1MB;
+ break;
+ default:
+ tp->nvram_size = TG3_NVRAM_SIZE_128KB;
+ break;
+ }
+ break;
+ case FLASH_5720VENDOR_M_ST_M25PE10:
+ case FLASH_5720VENDOR_M_ST_M45PE10:
+ case FLASH_5720VENDOR_A_ST_M25PE10:
+ case FLASH_5720VENDOR_A_ST_M45PE10:
+ case FLASH_5720VENDOR_M_ST_M25PE20:
+ case FLASH_5720VENDOR_M_ST_M45PE20:
+ case FLASH_5720VENDOR_A_ST_M25PE20:
+ case FLASH_5720VENDOR_A_ST_M45PE20:
+ case FLASH_5720VENDOR_M_ST_M25PE40:
+ case FLASH_5720VENDOR_M_ST_M45PE40:
+ case FLASH_5720VENDOR_A_ST_M25PE40:
+ case FLASH_5720VENDOR_A_ST_M45PE40:
+ case FLASH_5720VENDOR_M_ST_M25PE80:
+ case FLASH_5720VENDOR_M_ST_M45PE80:
+ case FLASH_5720VENDOR_A_ST_M25PE80:
+ case FLASH_5720VENDOR_A_ST_M45PE80:
+ case FLASH_5720VENDOR_ST_25USPT:
+ case FLASH_5720VENDOR_ST_45USPT:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tg3_flag_set(tp, NVRAM_BUFFERED);
+ tg3_flag_set(tp, FLASH);
+
+ switch (nvmpinstrp) {
+ case FLASH_5720VENDOR_M_ST_M25PE20:
+ case FLASH_5720VENDOR_M_ST_M45PE20:
+ case FLASH_5720VENDOR_A_ST_M25PE20:
+ case FLASH_5720VENDOR_A_ST_M45PE20:
+ tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+ break;
+ case FLASH_5720VENDOR_M_ST_M25PE40:
+ case FLASH_5720VENDOR_M_ST_M45PE40:
+ case FLASH_5720VENDOR_A_ST_M25PE40:
+ case FLASH_5720VENDOR_A_ST_M45PE40:
+ tp->nvram_size = TG3_NVRAM_SIZE_512KB;
+ break;
+ case FLASH_5720VENDOR_M_ST_M25PE80:
+ case FLASH_5720VENDOR_M_ST_M45PE80:
+ case FLASH_5720VENDOR_A_ST_M25PE80:
+ case FLASH_5720VENDOR_A_ST_M45PE80:
+ tp->nvram_size = TG3_NVRAM_SIZE_1MB;
+ break;
+ default:
+ tp->nvram_size = TG3_NVRAM_SIZE_128KB;
+ break;
+ }
+ break;
+ default:
+ tg3_flag_set(tp, NO_NVRAM);
+ return;
+ }
+
+ tg3_nvram_get_pagesize(tp, nvcfg1);
+ if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
+ tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
}
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
@@ -11905,7 +12201,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
- tp->tg3_flags |= TG3_FLAG_NVRAM;
+ tg3_flag_set(tp, NVRAM);
if (tg3_nvram_lock(tp)) {
netdev_warn(tp->dev,
@@ -11935,6 +12231,8 @@
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
tg3_get_5717_nvram_info(tp);
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+ tg3_get_5720_nvram_info(tp);
else
tg3_get_nvram_info(tp);
@@ -11945,7 +12243,8 @@
tg3_nvram_unlock(tp);
} else {
- tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
+ tg3_flag_clear(tp, NVRAM);
+ tg3_flag_clear(tp, NVRAM_BUFFERED);
tg3_get_eeprom_size(tp);
}
@@ -12128,7 +12427,7 @@
nvram_cmd |= NVRAM_CMD_LAST;
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752 &&
- !(tp->tg3_flags3 & TG3_FLG3_5755_PLUS) &&
+ !tg3_flag(tp, 5755_PLUS) &&
(tp->nvram_jedecnum == JEDEC_ST) &&
(nvram_cmd & NVRAM_CMD_FIRST)) {
@@ -12138,7 +12437,7 @@
break;
}
- if (!(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
+ if (!tg3_flag(tp, FLASH)) {
/* We always do complete word writes to eeprom. */
nvram_cmd |= (NVRAM_CMD_FIRST | NVRAM_CMD_LAST);
}
@@ -12154,13 +12453,13 @@
{
int ret;
- if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+ if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
udelay(40);
}
- if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) {
+ if (!tg3_flag(tp, NVRAM)) {
ret = tg3_nvram_write_block_using_eeprom(tp, offset, len, buf);
} else {
u32 grc_mode;
@@ -12170,16 +12469,13 @@
return ret;
tg3_enable_nvram_access(tp);
- if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
- !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM))
+ if (tg3_flag(tp, 5750_PLUS) && !tg3_flag(tp, PROTECTED_NVRAM))
tw32(NVRAM_WRITE1, 0x406);
grc_mode = tr32(GRC_MODE);
tw32(GRC_MODE, grc_mode | GRC_MODE_NVRAM_WR_ENABLE);
- if ((tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) ||
- !(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
-
+ if (tg3_flag(tp, NVRAM_BUFFERED) || !tg3_flag(tp, FLASH)) {
ret = tg3_nvram_write_block_buffered(tp, offset, len,
buf);
} else {
@@ -12194,7 +12490,7 @@
tg3_nvram_unlock(tp);
}
- if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+ if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(40);
}
@@ -12316,19 +12612,22 @@
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
/* Assume an onboard device and WOL capable by default. */
- tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT | TG3_FLAG_WOL_CAP;
+ tg3_flag_set(tp, EEPROM_WRITE_PROT);
+ tg3_flag_set(tp, WOL_CAP);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) {
- tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
- tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
+ tg3_flag_clear(tp, EEPROM_WRITE_PROT);
+ tg3_flag_set(tp, IS_NIC);
}
val = tr32(VCPU_CFGSHDW);
if (val & VCPU_CFGSHDW_ASPM_DBNC)
- tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
+ tg3_flag_set(tp, ASPM_WORKAROUND);
if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
- (val & VCPU_CFGSHDW_WOL_MAGPKT))
- tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
+ (val & VCPU_CFGSHDW_WOL_MAGPKT)) {
+ tg3_flag_set(tp, WOL_ENABLE);
+ device_set_wakeup_enable(&tp->pdev->dev, true);
+ }
goto done;
}
@@ -12343,9 +12642,9 @@
tg3_read_mem(tp, NIC_SRAM_DATA_VER, &ver);
ver >>= NIC_SRAM_DATA_VER_SHIFT;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703) &&
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703 &&
(ver > 0) && (ver < 0x100))
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &cfg2);
@@ -12369,13 +12668,13 @@
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
else
tp->phy_flags |= TG3_PHYFLG_MII_SERDES;
}
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
+ if (tg3_flag(tp, 5750_PLUS))
led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
SHASTA_EXT_LED_MODE_MASK);
else
@@ -12435,34 +12734,36 @@
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
- tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
+ tg3_flag_set(tp, EEPROM_WRITE_PROT);
if ((tp->pdev->subsystem_vendor ==
PCI_VENDOR_ID_ARIMA) &&
(tp->pdev->subsystem_device == 0x205a ||
tp->pdev->subsystem_device == 0x2063))
- tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
+ tg3_flag_clear(tp, EEPROM_WRITE_PROT);
} else {
- tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
- tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
+ tg3_flag_clear(tp, EEPROM_WRITE_PROT);
+ tg3_flag_set(tp, IS_NIC);
}
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
- tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
- tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
+ tg3_flag_set(tp, ENABLE_ASF);
+ if (tg3_flag(tp, 5750_PLUS))
+ tg3_flag_set(tp, ASF_NEW_HANDSHAKE);
}
if ((nic_cfg & NIC_SRAM_DATA_CFG_APE_ENABLE) &&
- (tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
- tp->tg3_flags3 |= TG3_FLG3_ENABLE_APE;
+ tg3_flag(tp, 5750_PLUS))
+ tg3_flag_set(tp, ENABLE_APE);
if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES &&
!(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
- tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
+ tg3_flag_clear(tp, WOL_CAP);
- if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
- (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE))
- tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
+ if (tg3_flag(tp, WOL_CAP) &&
+ (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE)) {
+ tg3_flag_set(tp, WOL_ENABLE);
+ device_set_wakeup_enable(&tp->pdev->dev, true);
+ }
if (cfg2 & (1 << 17))
tp->phy_flags |= TG3_PHYFLG_CAPACITIVE_COUPLING;
@@ -12472,33 +12773,33 @@
if (cfg2 & (1 << 18))
tp->phy_flags |= TG3_PHYFLG_SERDES_PREEMPHASIS;
- if (((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) ||
- ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
- GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX))) &&
+ if ((tg3_flag(tp, 57765_PLUS) ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+ GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) &&
(cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
tp->phy_flags |= TG3_PHYFLG_ENABLE_APD;
- if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+ if (tg3_flag(tp, PCI_EXPRESS) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
- !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+ !tg3_flag(tp, 57765_PLUS)) {
u32 cfg3;
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_3, &cfg3);
if (cfg3 & NIC_SRAM_ASPM_DEBOUNCE)
- tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
+ tg3_flag_set(tp, ASPM_WORKAROUND);
}
if (cfg4 & NIC_SRAM_RGMII_INBAND_DISABLE)
- tp->tg3_flags3 |= TG3_FLG3_RGMII_INBAND_DISABLE;
+ tg3_flag_set(tp, RGMII_INBAND_DISABLE);
if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_RX_EN)
- tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_RX_EN;
+ tg3_flag_set(tp, RGMII_EXT_IBND_RX_EN);
if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_TX_EN)
- tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_TX_EN;
+ tg3_flag_set(tp, RGMII_EXT_IBND_TX_EN);
}
done:
- if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+ if (tg3_flag(tp, WOL_CAP))
device_set_wakeup_enable(&tp->pdev->dev,
- tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+ tg3_flag(tp, WOL_ENABLE));
else
device_set_wakeup_capable(&tp->pdev->dev, false);
}
@@ -12588,18 +12889,17 @@
int err;
/* flow control autonegotiation is default behavior */
- tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tg3_flag_set(tp, PAUSE_AUTONEG);
tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
+ if (tg3_flag(tp, USE_PHYLIB))
return tg3_phy_init(tp);
/* Reading the PHY ID register can conflict with ASF
* firmware access to the PHY hardware.
*/
err = 0;
- if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
+ if (tg3_flag(tp, ENABLE_ASF) || tg3_flag(tp, ENABLE_APE)) {
hw_phy_id = hw_phy_id_masked = TG3_PHY_ID_INVALID;
} else {
/* Now read the physical PHY_ID from the chip and verify
@@ -12655,9 +12955,9 @@
tg3_phy_init_link_config(tp);
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
- !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) &&
- !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
- u32 bmsr, adv_reg, tg3_ctrl, mask;
+ !tg3_flag(tp, ENABLE_APE) &&
+ !tg3_flag(tp, ENABLE_ASF)) {
+ u32 bmsr, mask;
tg3_readphy(tp, MII_BMSR, &bmsr);
if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
@@ -12668,36 +12968,18 @@
if (err)
return err;
- adv_reg = (ADVERTISE_10HALF | ADVERTISE_10FULL |
- ADVERTISE_100HALF | ADVERTISE_100FULL |
- ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
- tg3_ctrl = 0;
- if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
- tg3_ctrl = (MII_TG3_CTRL_ADV_1000_HALF |
- MII_TG3_CTRL_ADV_1000_FULL);
- if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
- tg3_ctrl |= (MII_TG3_CTRL_AS_MASTER |
- MII_TG3_CTRL_ENABLE_AS_MASTER);
- }
+ tg3_phy_set_wirespeed(tp);
mask = (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full);
if (!tg3_copper_is_advertising_all(tp, mask)) {
- tg3_writephy(tp, MII_ADVERTISE, adv_reg);
-
- if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
- tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
+ tg3_phy_autoneg_cfg(tp, tp->link_config.advertising,
+ tp->link_config.flowctrl);
tg3_writephy(tp, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART);
}
- tg3_phy_set_wirespeed(tp);
-
- tg3_writephy(tp, MII_ADVERTISE, adv_reg);
- if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
- tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
}
skip_phy_reset:
@@ -12717,46 +12999,11 @@
u8 *vpd_data;
unsigned int block_end, rosize, len;
int j, i = 0;
- u32 magic;
- if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
- tg3_nvram_read(tp, 0x0, &magic))
- goto out_no_vpd;
-
- vpd_data = kmalloc(TG3_NVM_VPD_LEN, GFP_KERNEL);
+ vpd_data = (u8 *)tg3_vpd_readblock(tp);
if (!vpd_data)
goto out_no_vpd;
- if (magic == TG3_EEPROM_MAGIC) {
- for (i = 0; i < TG3_NVM_VPD_LEN; i += 4) {
- u32 tmp;
-
- /* The data is in little-endian format in NVRAM.
- * Use the big-endian read routines to preserve
- * the byte order as it exists in NVRAM.
- */
- if (tg3_nvram_read_be32(tp, TG3_NVM_VPD_OFF + i, &tmp))
- goto out_not_found;
-
- memcpy(&vpd_data[i], &tmp, sizeof(tmp));
- }
- } else {
- ssize_t cnt;
- unsigned int pos = 0;
-
- for (; pos < TG3_NVM_VPD_LEN && i < 3; i++, pos += cnt) {
- cnt = pci_read_vpd(tp->pdev, pos,
- TG3_NVM_VPD_LEN - pos,
- &vpd_data[pos]);
- if (cnt == -ETIMEDOUT || cnt == -EINTR)
- cnt = 0;
- else if (cnt < 0)
- goto out_not_found;
- }
- if (pos != TG3_NVM_VPD_LEN)
- goto out_not_found;
- }
-
i = pci_vpd_find_tag(vpd_data, 0, TG3_NVM_VPD_LEN,
PCI_VPD_LRDT_RO_DATA);
if (i < 0)
@@ -13010,7 +13257,7 @@
if (offset == TG3_NVM_DIR_END)
return;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!tg3_flag(tp, 5705_PLUS))
start = 0x08000000;
else if (tg3_nvram_read(tp, offset - 4, &start))
return;
@@ -13050,8 +13297,7 @@
u32 apedata;
char *fwtype;
- if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) ||
- !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (!tg3_flag(tp, ENABLE_APE) || !tg3_flag(tp, ENABLE_ASF))
return;
apedata = tg3_ape_read32(tp, TG3_APE_SEG_SIG);
@@ -13065,7 +13311,7 @@
apedata = tg3_ape_read32(tp, TG3_APE_FW_VERSION);
if (tg3_ape_read32(tp, TG3_APE_FW_FEATURES) & TG3_APE_FW_FEATURE_NCSI) {
- tp->tg3_flags3 |= TG3_FLG3_APE_HAS_NCSI;
+ tg3_flag_set(tp, APE_HAS_NCSI);
fwtype = "NCSI";
} else {
fwtype = "DASH";
@@ -13089,7 +13335,7 @@
if (tp->fw_ver[0] != 0)
vpd_vers = true;
- if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) {
+ if (tg3_flag(tp, NO_NVRAM)) {
strcat(tp->fw_ver, "sb");
return;
}
@@ -13106,8 +13352,7 @@
else
return;
- if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) || vpd_vers)
+ if (!tg3_flag(tp, ENABLE_ASF) || tg3_flag(tp, ENABLE_APE) || vpd_vers)
goto done;
tg3_read_mgmtfw_ver(tp);
@@ -13118,21 +13363,14 @@
static struct pci_dev * __devinit tg3_find_peer(struct tg3 *);
-static inline void vlan_features_add(struct net_device *dev, unsigned long flags)
-{
- dev->vlan_features |= flags;
-}
-
static inline u32 tg3_rx_ret_ring_size(struct tg3 *tp)
{
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
- return 4096;
- else if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
- return 1024;
+ if (tg3_flag(tp, LRG_PROD_RING_CAP))
+ return TG3_RX_RET_MAX_SIZE_5717;
+ else if (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS))
+ return TG3_RX_RET_MAX_SIZE_5700;
else
- return 512;
+ return TG3_RX_RET_MAX_SIZE_5705;
}
static DEFINE_PCI_DEVICE_TABLE(tg3_write_reorder_chipsets) = {
@@ -13177,7 +13415,8 @@
if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717 ||
tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 ||
- tp->pdev->device == TG3PCI_DEVICE_TIGON3_5719)
+ tp->pdev->device == TG3PCI_DEVICE_TIGON3_5719 ||
+ tp->pdev->device == TG3PCI_DEVICE_TIGON3_5720)
pci_read_config_dword(tp->pdev,
TG3PCI_GEN2_PRODID_ASICREV,
&prod_id_asic_rev);
@@ -13254,15 +13493,14 @@
if (bridge->subordinate &&
(bridge->subordinate->number ==
tp->pdev->bus->number)) {
-
- tp->tg3_flags2 |= TG3_FLG2_ICH_WORKAROUND;
+ tg3_flag_set(tp, ICH_WORKAROUND);
pci_dev_put(bridge);
break;
}
}
}
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
static struct tg3_dev_id {
u32 vendor;
u32 device;
@@ -13287,7 +13525,7 @@
tp->pdev->bus->number) &&
(bridge->subordinate->subordinate >=
tp->pdev->bus->number)) {
- tp->tg3_flags3 |= TG3_FLG3_5701_DMA_BUG;
+ tg3_flag_set(tp, 5701_DMA_BUG);
pci_dev_put(bridge);
break;
}
@@ -13302,8 +13540,8 @@
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
- tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
- tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+ tg3_flag_set(tp, 5780_CLASS);
+ tg3_flag_set(tp, 40BIT_DMA_BUG);
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
} else {
struct pci_dev *bridge = NULL;
@@ -13317,7 +13555,7 @@
tp->pdev->bus->number) &&
(bridge->subordinate->subordinate >=
tp->pdev->bus->number)) {
- tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+ tg3_flag_set(tp, 40BIT_DMA_BUG);
pci_dev_put(bridge);
break;
}
@@ -13332,13 +13570,18 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
tp->pdev_peer = tg3_find_peer(tp);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
- tp->tg3_flags3 |= TG3_FLG3_5717_PLUS;
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+ tg3_flag_set(tp, 5717_PLUS);
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 ||
+ tg3_flag(tp, 5717_PLUS))
+ tg3_flag_set(tp, 57765_PLUS);
/* Intentionally exclude ASIC_REV_5906 */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
@@ -13347,97 +13590,102 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
- (tp->tg3_flags3 & TG3_FLG3_5717_PLUS))
- tp->tg3_flags3 |= TG3_FLG3_5755_PLUS;
+ tg3_flag(tp, 57765_PLUS))
+ tg3_flag_set(tp, 5755_PLUS);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
- (tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
- tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
+ tg3_flag(tp, 5755_PLUS) ||
+ tg3_flag(tp, 5780_CLASS))
+ tg3_flag_set(tp, 5750_PLUS);
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
- (tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
- tp->tg3_flags2 |= TG3_FLG2_5705_PLUS;
-
- /* 5700 B0 chips do not support checksumming correctly due
- * to hardware bugs.
- */
- if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
- tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
- else {
- unsigned long features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_GRO;
-
- tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
- if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
- features |= NETIF_F_IPV6_CSUM;
- tp->dev->features |= features;
- vlan_features_add(tp->dev, features);
- }
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ||
+ tg3_flag(tp, 5750_PLUS))
+ tg3_flag_set(tp, 5705_PLUS);
/* Determine TSO capabilities */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
; /* Do nothing. HW bug. */
- else if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)
- tp->tg3_flags2 |= TG3_FLG2_HW_TSO_3;
- else if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+ else if (tg3_flag(tp, 57765_PLUS))
+ tg3_flag_set(tp, HW_TSO_3);
+ else if (tg3_flag(tp, 5755_PLUS) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
- tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
- else if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
- tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | TG3_FLG2_TSO_BUG;
+ tg3_flag_set(tp, HW_TSO_2);
+ else if (tg3_flag(tp, 5750_PLUS)) {
+ tg3_flag_set(tp, HW_TSO_1);
+ tg3_flag_set(tp, TSO_BUG);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 &&
tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2)
- tp->tg3_flags2 &= ~TG3_FLG2_TSO_BUG;
+ tg3_flag_clear(tp, TSO_BUG);
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
- tp->tg3_flags2 |= TG3_FLG2_TSO_BUG;
+ tg3_flag_set(tp, TSO_BUG);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
tp->fw_needed = FIRMWARE_TG3TSO5;
else
tp->fw_needed = FIRMWARE_TG3TSO;
}
+ /* Selectively allow TSO based on operating conditions */
+ if (tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3) ||
+ (tp->fw_needed && !tg3_flag(tp, ENABLE_ASF)))
+ tg3_flag_set(tp, TSO_CAPABLE);
+ else {
+ tg3_flag_clear(tp, TSO_CAPABLE);
+ tg3_flag_clear(tp, TSO_BUG);
+ tp->fw_needed = NULL;
+ }
+
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
+ tp->fw_needed = FIRMWARE_TG3;
+
tp->irq_max = 1;
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
- tp->tg3_flags |= TG3_FLAG_SUPPORT_MSI;
+ if (tg3_flag(tp, 5750_PLUS)) {
+ tg3_flag_set(tp, SUPPORT_MSI);
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX ||
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 &&
tp->pci_chip_rev_id <= CHIPREV_ID_5714_A2 &&
tp->pdev_peer == tp->pdev))
- tp->tg3_flags &= ~TG3_FLAG_SUPPORT_MSI;
+ tg3_flag_clear(tp, SUPPORT_MSI);
- if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+ if (tg3_flag(tp, 5755_PLUS) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- tp->tg3_flags2 |= TG3_FLG2_1SHOT_MSI;
+ tg3_flag_set(tp, 1SHOT_MSI);
}
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
- tp->tg3_flags |= TG3_FLAG_SUPPORT_MSIX;
+ if (tg3_flag(tp, 57765_PLUS)) {
+ tg3_flag_set(tp, SUPPORT_MSIX);
tp->irq_max = TG3_IRQ_MAX_VECS;
}
}
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
- tp->tg3_flags3 |= TG3_FLG3_SHORT_DMA_BUG;
- else if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS)) {
- tp->tg3_flags3 |= TG3_FLG3_4G_DMA_BNDRY_BUG;
- tp->tg3_flags3 |= TG3_FLG3_40BIT_DMA_LIMIT_BUG;
- }
+ /* All chips can get confused if TX buffers
+ * straddle the 4GB address boundary.
+ */
+ tg3_flag_set(tp, 4G_DMA_BNDRY_BUG);
- if ((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
+ if (tg3_flag(tp, 5755_PLUS))
+ tg3_flag_set(tp, SHORT_DMA_BUG);
+ else
+ tg3_flag_set(tp, 40BIT_DMA_LIMIT_BUG);
+
+ if (tg3_flag(tp, 5717_PLUS))
+ tg3_flag_set(tp, LRG_PROD_RING_CAP);
+
+ if (tg3_flag(tp, 57765_PLUS) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5719)
- tp->tg3_flags3 |= TG3_FLG3_USE_JUMBO_BDFLAG;
+ tg3_flag_set(tp, USE_JUMBO_BDFLAG);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
- (tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG))
- tp->tg3_flags |= TG3_FLAG_JUMBO_CAPABLE;
+ if (!tg3_flag(tp, 5705_PLUS) ||
+ tg3_flag(tp, 5780_CLASS) ||
+ tg3_flag(tp, USE_JUMBO_BDFLAG))
+ tg3_flag_set(tp, JUMBO_CAPABLE);
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
&pci_state_reg);
@@ -13446,10 +13694,11 @@
if (tp->pcie_cap != 0) {
u16 lnkctl;
- tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
+ tg3_flag_set(tp, PCI_EXPRESS);
tp->pcie_readrq = 4096;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
tp->pcie_readrq = 2048;
pcie_set_readrq(tp->pdev, tp->pcie_readrq);
@@ -13458,20 +13707,23 @@
tp->pcie_cap + PCI_EXP_LNKCTL,
&lnkctl);
if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
- tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+ ASIC_REV_5906) {
+ tg3_flag_clear(tp, HW_TSO_2);
+ tg3_flag_clear(tp, TSO_CAPABLE);
+ }
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_57780_A1)
- tp->tg3_flags3 |= TG3_FLG3_CLKREQ_BUG;
+ tg3_flag_set(tp, CLKREQ_BUG);
} else if (tp->pci_chip_rev_id == CHIPREV_ID_5717_A0) {
- tp->tg3_flags3 |= TG3_FLG3_L1PLLPD_EN;
+ tg3_flag_set(tp, L1PLLPD_EN);
}
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
- tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
- } else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ tg3_flag_set(tp, PCI_EXPRESS);
+ } else if (!tg3_flag(tp, 5705_PLUS) ||
+ tg3_flag(tp, 5780_CLASS)) {
tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
if (!tp->pcix_cap) {
dev_err(&tp->pdev->dev,
@@ -13480,7 +13732,7 @@
}
if (!(pci_state_reg & PCISTATE_CONV_PCI_MODE))
- tp->tg3_flags |= TG3_FLAG_PCIX_MODE;
+ tg3_flag_set(tp, PCIX_MODE);
}
/* If we have an AMD 762 or VIA K8T800 chipset, write
@@ -13490,8 +13742,8 @@
* posted to the chip in order.
*/
if (pci_dev_present(tg3_write_reorder_chipsets) &&
- !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
- tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
+ !tg3_flag(tp, PCI_EXPRESS))
+ tg3_flag_set(tp, MBOX_WRITE_REORDER);
pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
&tp->pci_cacheline_sz);
@@ -13508,17 +13760,17 @@
/* 5700 BX chips need to have their TX producer index
* mailboxes written twice to workaround a bug.
*/
- tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
+ tg3_flag_set(tp, TXD_MBOX_HWBUG);
/* If we are in PCI-X mode, enable register write workaround.
*
* The workaround is to use indirect register accesses
* for all chip writes not to mailbox registers.
*/
- if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+ if (tg3_flag(tp, PCIX_MODE)) {
u32 pm_reg;
- tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
+ tg3_flag_set(tp, PCIX_TARGET_HWBUG);
/* The chip can have it's power management PCI config
* space registers clobbered due to this bug.
@@ -13541,9 +13793,9 @@
}
if ((pci_state_reg & PCISTATE_BUS_SPEED_HIGH) != 0)
- tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
+ tg3_flag_set(tp, PCI_HIGH_SPEED);
if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
- tp->tg3_flags |= TG3_FLAG_PCI_32BIT;
+ tg3_flag_set(tp, PCI_32BIT);
/* Chip-specific fixup from Broadcom driver */
if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) &&
@@ -13561,10 +13813,10 @@
tp->write32_rx_mbox = tg3_write32;
/* Various workaround register access methods */
- if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
+ if (tg3_flag(tp, PCIX_TARGET_HWBUG))
tp->write32 = tg3_write_indirect_reg32;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
- ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+ (tg3_flag(tp, PCI_EXPRESS) &&
tp->pci_chip_rev_id == CHIPREV_ID_5750_A0)) {
/*
* Back to back register writes can cause problems on these
@@ -13576,14 +13828,13 @@
tp->write32 = tg3_write_flush_reg32;
}
- if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
- (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
+ if (tg3_flag(tp, TXD_MBOX_HWBUG) || tg3_flag(tp, MBOX_WRITE_REORDER)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+ if (tg3_flag(tp, MBOX_WRITE_REORDER))
tp->write32_rx_mbox = tg3_write_flush_reg32;
}
- if (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND) {
+ if (tg3_flag(tp, ICH_WORKAROUND)) {
tp->read32 = tg3_read_indirect_reg32;
tp->write32 = tg3_write_indirect_reg32;
tp->read32_mbox = tg3_read_indirect_mbox;
@@ -13606,13 +13857,13 @@
}
if (tp->write32 == tg3_write_indirect_reg32 ||
- ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
+ (tg3_flag(tp, PCIX_MODE) &&
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
- tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+ tg3_flag_set(tp, SRAM_USE_CONFIG);
/* Get eeprom hw config before calling tg3_set_power_state().
- * In particular, the TG3_FLG2_IS_NIC flag must be
+ * In particular, the TG3_FLAG_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
* we know whether or not to switch out of Vaux power.
* When the flag is set, it means that GPIO1 is used for eeprom
@@ -13621,7 +13872,7 @@
*/
tg3_get_eeprom_hw_cfg(tp);
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+ if (tg3_flag(tp, ENABLE_APE)) {
/* Allow reads and writes to the
* APE register and memory space.
*/
@@ -13636,16 +13887,16 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
- (tp->tg3_flags3 & TG3_FLG3_5717_PLUS))
- tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
+ tg3_flag(tp, 57765_PLUS))
+ tg3_flag_set(tp, CPMU_PRESENT);
- /* Set up tp->grc_local_ctrl before calling tg_power_up().
+ /* Set up tp->grc_local_ctrl before calling tg3_power_up().
* GPIO1 driven high will bring 5700's external PHY out of reset.
* It is also used as eeprom write protect on LOMs.
*/
tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
- (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
+ tg3_flag(tp, EEPROM_WRITE_PROT))
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
/* Unused GPIO3 must be driven as output on 5752 because there
@@ -13663,7 +13914,7 @@
tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
/* Turn off the debug UART. */
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
- if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+ if (tg3_flag(tp, IS_NIC))
/* Keep VMain power. */
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
GRC_LCLCTRL_GPIO_OUTPUT0;
@@ -13679,26 +13930,25 @@
/* Derive initial jumbo mode from MTU assigned in
* ether_setup() via the alloc_etherdev() call
*/
- if (tp->dev->mtu > ETH_DATA_LEN &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
- tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
+ if (tp->dev->mtu > ETH_DATA_LEN && !tg3_flag(tp, 5780_CLASS))
+ tg3_flag_set(tp, JUMBO_RING_ENABLE);
/* Determine WakeOnLan speed to use. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B2) {
- tp->tg3_flags &= ~(TG3_FLAG_WOL_SPEED_100MB);
+ tg3_flag_clear(tp, WOL_SPEED_100MB);
} else {
- tp->tg3_flags |= TG3_FLAG_WOL_SPEED_100MB;
+ tg3_flag_set(tp, WOL_SPEED_100MB);
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tp->phy_flags |= TG3_PHYFLG_IS_FET;
/* A few boards don't want Ethernet@WireSpeed phy feature */
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
- ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
(tp->phy_flags & TG3_PHYFLG_IS_FET) ||
@@ -13711,11 +13961,11 @@
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
tp->phy_flags |= TG3_PHYFLG_5704_A0_BUG;
- if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+ if (tg3_flag(tp, 5705_PLUS) &&
!(tp->phy_flags & TG3_PHYFLG_IS_FET) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780 &&
- !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+ !tg3_flag(tp, 57765_PLUS)) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
@@ -13736,7 +13986,7 @@
tp->phy_otp = TG3_OTP_DEFAULT;
}
- if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT)
+ if (tg3_flag(tp, CPMU_PRESENT))
tp->mi_mode = MAC_MI_MODE_500KHZ_CONST;
else
tp->mi_mode = MAC_MI_MODE_BASE;
@@ -13746,9 +13996,17 @@
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
tp->coalesce_mode |= HOSTCC_MODE_32BYTE;
+ /* Set these bits to enable statistics workaround. */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+ tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 ||
+ tp->pci_chip_rev_id == CHIPREV_ID_5720_A0) {
+ tp->coalesce_mode |= HOSTCC_MODE_ATTN;
+ tp->grc_mode |= GRC_MODE_IRQ_ON_FLOW_ATTN;
+ }
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
- tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
+ tg3_flag_set(tp, USE_PHYLIB);
err = tg3_mdio_init(tp);
if (err)
@@ -13756,7 +14014,15 @@
/* Initialize data/descriptor byte/word swapping. */
val = tr32(GRC_MODE);
- val &= GRC_MODE_HOST_STACKUP;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+ val &= (GRC_MODE_BYTE_SWAP_B2HRX_DATA |
+ GRC_MODE_WORD_SWAP_B2HRX_DATA |
+ GRC_MODE_B2HRX_ENABLE |
+ GRC_MODE_HTX2B_ENABLE |
+ GRC_MODE_HOST_STACKUP);
+ else
+ val &= GRC_MODE_HOST_STACKUP;
+
tw32(GRC_MODE, val | tp->grc_mode);
tg3_switch_clocks(tp);
@@ -13767,7 +14033,7 @@
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
&pci_state_reg);
if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 &&
- (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) == 0) {
+ !tg3_flag(tp, PCIX_TARGET_HWBUG)) {
u32 chiprevid = GET_CHIP_REV_ID(tp->misc_host_ctrl);
if (chiprevid == CHIPREV_ID_5701_A0 ||
@@ -13786,7 +14052,7 @@
writel(0x00000000, sram_base + 4);
writel(0xffffffff, sram_base + 4);
if (readl(sram_base) != 0x00000000)
- tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
+ tg3_flag_set(tp, PCIX_TARGET_HWBUG);
}
}
@@ -13799,12 +14065,12 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
(grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||
grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
- tp->tg3_flags2 |= TG3_FLG2_IS_5788;
+ tg3_flag_set(tp, IS_5788);
- if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700))
- tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS;
- if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
+ if (!tg3_flag(tp, IS_5788) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
+ tg3_flag_set(tp, TAGGED_STATUS);
+ if (tg3_flag(tp, TAGGED_STATUS)) {
tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD |
HOSTCC_MODE_CLRTICK_TXBD);
@@ -13814,7 +14080,7 @@
}
/* Preserve the APE MAC_MODE bits */
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ if (tg3_flag(tp, ENABLE_APE))
tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
else
tp->mac_mode = TG3_DEF_MAC_MODE;
@@ -13861,9 +14127,9 @@
* status register in those cases.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
- tp->tg3_flags |= TG3_FLAG_USE_LINKCHG_REG;
+ tg3_flag_set(tp, USE_LINKCHG_REG);
else
- tp->tg3_flags &= ~TG3_FLAG_USE_LINKCHG_REG;
+ tg3_flag_clear(tp, USE_LINKCHG_REG);
/* The led_ctrl is set during tg3_phy_probe, here we might
* have to force the link status polling mechanism based
@@ -13873,19 +14139,19 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
tp->phy_flags |= TG3_PHYFLG_USE_MI_INTERRUPT;
- tp->tg3_flags |= TG3_FLAG_USE_LINKCHG_REG;
+ tg3_flag_set(tp, USE_LINKCHG_REG);
}
/* For all SERDES we poll the MAC status register. */
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
- tp->tg3_flags |= TG3_FLAG_POLL_SERDES;
+ tg3_flag_set(tp, POLL_SERDES);
else
- tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
+ tg3_flag_clear(tp, POLL_SERDES);
tp->rx_offset = NET_IP_ALIGN;
tp->rx_copy_thresh = TG3_RX_COPY_THRESHOLD;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
- (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) {
+ tg3_flag(tp, PCIX_MODE)) {
tp->rx_offset = 0;
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
tp->rx_copy_thresh = ~(u16)0;
@@ -13906,7 +14172,7 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
tp->rx_std_max_post = 8;
- if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND)
+ if (tg3_flag(tp, ASPM_WORKAROUND))
tp->pwrmgmt_thresh = tr32(PCIE_PWR_MGMT_THRESH) &
PCIE_PWR_MGMT_L1_THRESH_MSK;
@@ -13953,16 +14219,15 @@
#endif
mac_offset = 0x7c;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+ tg3_flag(tp, 5780_CLASS)) {
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
mac_offset = 0xcc;
if (tg3_nvram_lock(tp))
tw32_f(NVRAM_CMD, NVRAM_CMD_RESET);
else
tg3_nvram_unlock(tp);
- } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+ } else if (tg3_flag(tp, 5717_PLUS)) {
if (PCI_FUNC(tp->pdev->devfn) & 1)
mac_offset = 0xcc;
if (PCI_FUNC(tp->pdev->devfn) > 1)
@@ -13987,7 +14252,7 @@
}
if (!addr_ok) {
/* Next, try NVRAM. */
- if (!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) &&
+ if (!tg3_flag(tp, NO_NVRAM) &&
!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
!tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
@@ -14038,7 +14303,7 @@
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
- !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
+ !tg3_flag(tp, PCI_EXPRESS))
goto out;
#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC)
@@ -14051,7 +14316,7 @@
#endif
#endif
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+ if (tg3_flag(tp, 57765_PLUS)) {
val = goal ? 0 : DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
goto out;
}
@@ -14070,8 +14335,7 @@
* other than 5700 and 5701 which do not implement the
* boundary bits.
*/
- if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
- !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
+ if (tg3_flag(tp, PCIX_MODE) && !tg3_flag(tp, PCI_EXPRESS)) {
switch (cacheline_size) {
case 16:
case 32:
@@ -14096,7 +14360,7 @@
DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
break;
}
- } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+ } else if (tg3_flag(tp, PCI_EXPRESS)) {
switch (cacheline_size) {
case 16:
case 32:
@@ -14268,13 +14532,13 @@
tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl);
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)
+ if (tg3_flag(tp, 57765_PLUS))
goto out;
- if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+ if (tg3_flag(tp, PCI_EXPRESS)) {
/* DMA read watermark not used on PCIE */
tp->dma_rwctrl |= 0x00180000;
- } else if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
+ } else if (!tg3_flag(tp, PCIX_MODE)) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
tp->dma_rwctrl |= 0x003f0000;
@@ -14290,7 +14554,7 @@
* do the less restrictive ONE_DMA workaround for
* better performance.
*/
- if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+ if (tg3_flag(tp, 40BIT_DMA_BUG) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
tp->dma_rwctrl |= 0x8000;
else if (ccval == 0x6 || ccval == 0x7)
@@ -14419,7 +14683,6 @@
}
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
DMA_RWCTRL_WRITE_BNDRY_16) {
-
/* DMA test passed without adjusting DMA boundary,
* now look for chipsets that are known to expose the
* DMA bug without failing the test.
@@ -14443,7 +14706,7 @@
static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
{
- if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+ if (tg3_flag(tp, 57765_PLUS)) {
tp->bufmgr_config.mbuf_read_dma_low_water =
DEFAULT_MB_RDMA_LOW_WATER_5705;
tp->bufmgr_config.mbuf_mac_rx_low_water =
@@ -14457,7 +14720,7 @@
DEFAULT_MB_MACRX_LOW_WATER_JUMBO_57765;
tp->bufmgr_config.mbuf_high_water_jumbo =
DEFAULT_MB_HIGH_WATER_JUMBO_57765;
- } else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ } else if (tg3_flag(tp, 5705_PLUS)) {
tp->bufmgr_config.mbuf_read_dma_low_water =
DEFAULT_MB_RDMA_LOW_WATER_5705;
tp->bufmgr_config.mbuf_mac_rx_low_water =
@@ -14521,6 +14784,7 @@
case TG3_PHY_ID_BCM5718S: return "5718S";
case TG3_PHY_ID_BCM57765: return "57765";
case TG3_PHY_ID_BCM5719C: return "5719C";
+ case TG3_PHY_ID_BCM5720C: return "5720C";
case TG3_PHY_ID_BCM8002: return "8002/serdes";
case 0: return "serdes";
default: return "unknown";
@@ -14529,10 +14793,10 @@
static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
{
- if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+ if (tg3_flag(tp, PCI_EXPRESS)) {
strcpy(str, "PCI Express");
return str;
- } else if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+ } else if (tg3_flag(tp, PCIX_MODE)) {
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL) & 0x1f;
strcpy(str, "PCIX:");
@@ -14551,12 +14815,12 @@
strcat(str, "100MHz");
} else {
strcpy(str, "PCI:");
- if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED)
+ if (tg3_flag(tp, PCI_HIGH_SPEED))
strcat(str, "66MHz");
else
strcat(str, "33MHz");
}
- if (tp->tg3_flags & TG3_FLAG_PCI_32BIT)
+ if (tg3_flag(tp, PCI_32BIT))
strcat(str, ":32-bit");
else
strcat(str, ":64-bit");
@@ -14615,7 +14879,7 @@
ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS;
}
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ if (tg3_flag(tp, 5705_PLUS)) {
ec->rx_coalesce_usecs_irq = 0;
ec->tx_coalesce_usecs_irq = 0;
ec->stats_block_coalesce_usecs = 0;
@@ -14633,22 +14897,8 @@
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = tg3_poll_controller,
-#endif
-};
-
-static const struct net_device_ops tg3_netdev_ops_dma_bug = {
- .ndo_open = tg3_open,
- .ndo_stop = tg3_close,
- .ndo_start_xmit = tg3_start_xmit_dma_bug,
- .ndo_get_stats64 = tg3_get_stats64,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_multicast_list = tg3_set_rx_mode,
- .ndo_set_mac_address = tg3_set_mac_addr,
- .ndo_do_ioctl = tg3_ioctl,
- .ndo_tx_timeout = tg3_tx_timeout,
- .ndo_change_mtu = tg3_change_mtu,
+ .ndo_fix_features = tg3_fix_features,
+ .ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
@@ -14663,6 +14913,7 @@
u32 sndmbx, rcvmbx, intmbx;
char str[40];
u64 dma_mask, persist_dma_mask;
+ u32 features = 0;
printk_once(KERN_INFO "%s\n", version);
@@ -14698,8 +14949,6 @@
SET_NETDEV_DEV(dev, &pdev->dev);
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-
tp = netdev_priv(dev);
tp->pdev = pdev;
tp->dev = dev;
@@ -14749,6 +14998,7 @@
dev->ethtool_ops = &tg3_ethtool_ops;
dev->watchdog_timeo = TG3_TX_TIMEOUT;
+ dev->netdev_ops = &tg3_netdev_ops;
dev->irq = pdev->irq;
err = tg3_get_invariants(tp);
@@ -14758,23 +15008,15 @@
goto err_out_iounmap;
}
- if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5719)
- dev->netdev_ops = &tg3_netdev_ops;
- else
- dev->netdev_ops = &tg3_netdev_ops_dma_bug;
-
-
/* The EPB bridge inside 5714, 5715, and 5780 and any
* device behind the EPB cannot support DMA addresses > 40-bit.
* On 64-bit systems with IOMMU, use 40-bit dma_mask.
* On 64-bit systems without IOMMU, use 64-bit dma_mask and
* do DMA address check in tg3_start_xmit().
*/
- if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+ if (tg3_flag(tp, IS_5788))
persist_dma_mask = dma_mask = DMA_BIT_MASK(32);
- else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
+ else if (tg3_flag(tp, 40BIT_DMA_BUG)) {
persist_dma_mask = dma_mask = DMA_BIT_MASK(40);
#ifdef CONFIG_HIGHMEM
dma_mask = DMA_BIT_MASK(64);
@@ -14786,7 +15028,7 @@
if (dma_mask > DMA_BIT_MASK(32)) {
err = pci_set_dma_mask(pdev, dma_mask);
if (!err) {
- dev->features |= NETIF_F_HIGHDMA;
+ features |= NETIF_F_HIGHDMA;
err = pci_set_consistent_dma_mask(pdev,
persist_dma_mask);
if (err < 0) {
@@ -14807,48 +15049,58 @@
tg3_init_bufmgr_config(tp);
- /* Selectively allow TSO based on operating conditions */
- if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
- (tp->fw_needed && !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)))
- tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
- else {
- tp->tg3_flags2 &= ~(TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG);
- tp->fw_needed = NULL;
- }
+ features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
- tp->fw_needed = FIRMWARE_TG3;
+ /* 5700 B0 chips do not support checksumming correctly due
+ * to hardware bugs.
+ */
+ if (tp->pci_chip_rev_id != CHIPREV_ID_5700_B0) {
+ features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
+ if (tg3_flag(tp, 5755_PLUS))
+ features |= NETIF_F_IPV6_CSUM;
+ }
/* TSO is on by default on chips that support hardware TSO.
* Firmware TSO on older chips gives lower performance, so it
* is off by default, but can be enabled using ethtool.
*/
- if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) &&
- (dev->features & NETIF_F_IP_CSUM)) {
- dev->features |= NETIF_F_TSO;
- vlan_features_add(dev, NETIF_F_TSO);
- }
- if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
- (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3)) {
- if (dev->features & NETIF_F_IPV6_CSUM) {
- dev->features |= NETIF_F_TSO6;
- vlan_features_add(dev, NETIF_F_TSO6);
- }
- if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+ if ((tg3_flag(tp, HW_TSO_1) ||
+ tg3_flag(tp, HW_TSO_2) ||
+ tg3_flag(tp, HW_TSO_3)) &&
+ (features & NETIF_F_IP_CSUM))
+ features |= NETIF_F_TSO;
+ if (tg3_flag(tp, HW_TSO_2) || tg3_flag(tp, HW_TSO_3)) {
+ if (features & NETIF_F_IPV6_CSUM)
+ features |= NETIF_F_TSO6;
+ if (tg3_flag(tp, HW_TSO_3) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
- dev->features |= NETIF_F_TSO_ECN;
- vlan_features_add(dev, NETIF_F_TSO_ECN);
- }
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+ features |= NETIF_F_TSO_ECN;
}
+ dev->features |= features;
+ dev->vlan_features |= features;
+
+ /*
+ * Add loopback capability only for a subset of devices that support
+ * MAC-LOOPBACK. Eventually this need to be enhanced to allow INT-PHY
+ * loopback for the remaining devices.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 &&
+ !tg3_flag(tp, CPMU_PRESENT))
+ /* Add the loopback capability */
+ features |= NETIF_F_LOOPBACK;
+
+ dev->hw_features |= features;
+
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
- !(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
+ !tg3_flag(tp, TSO_CAPABLE) &&
!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {
- tp->tg3_flags2 |= TG3_FLG2_MAX_RXPEND_64;
+ tg3_flag_set(tp, MAX_RXPEND_64);
tp->rx_pending = 63;
}
@@ -14859,7 +15111,7 @@
goto err_out_iounmap;
}
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+ if (tg3_flag(tp, ENABLE_APE)) {
tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
if (!tp->aperegs) {
dev_err(&pdev->dev,
@@ -14870,7 +15122,7 @@
tg3_ape_lock_init(tp);
- if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
+ if (tg3_flag(tp, ENABLE_ASF))
tg3_read_dash_ver(tp);
}
@@ -14914,7 +15166,7 @@
else
tnapi->coal_now = HOSTCC_MODE_NOW;
- if (!(tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX))
+ if (!tg3_flag(tp, SUPPORT_MSIX))
break;
/*
@@ -14968,21 +15220,25 @@
ethtype = "10/100/1000Base-T";
netdev_info(dev, "attached PHY is %s (%s Ethernet) "
- "(WireSpeed[%d])\n", tg3_phy_string(tp), ethtype,
- (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED) == 0);
+ "(WireSpeed[%d], EEE[%d])\n",
+ tg3_phy_string(tp), ethtype,
+ (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED) == 0,
+ (tp->phy_flags & TG3_PHYFLG_EEE_CAP) != 0);
}
netdev_info(dev, "RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
- (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
+ (dev->features & NETIF_F_RXCSUM) != 0,
+ tg3_flag(tp, USE_LINKCHG_REG) != 0,
(tp->phy_flags & TG3_PHYFLG_USE_MI_INTERRUPT) != 0,
- (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
- (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+ tg3_flag(tp, ENABLE_ASF) != 0,
+ tg3_flag(tp, TSO_CAPABLE) != 0);
netdev_info(dev, "dma_rwctrl[%08x] dma_mask[%d-bit]\n",
tp->dma_rwctrl,
pdev->dma_mask == DMA_BIT_MASK(32) ? 32 :
((u64)pdev->dma_mask) == DMA_BIT_MASK(40) ? 40 : 64);
+ pci_save_state(pdev);
+
return 0;
err_out_apeunmap:
@@ -15021,7 +15277,7 @@
cancel_work_sync(&tp->reset_task);
- if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ if (!tg3_flag(tp, USE_PHYLIB)) {
tg3_phy_fini(tp);
tg3_mdio_fini(tp);
}
@@ -15067,7 +15323,7 @@
tg3_full_lock(tp, 0);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_clear(tp, INIT_COMPLETE);
tg3_full_unlock(tp);
err = tg3_power_down_prepare(tp);
@@ -15076,7 +15332,7 @@
tg3_full_lock(tp, 0);
- tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_set(tp, INIT_COMPLETE);
err2 = tg3_restart_hw(tp, 1);
if (err2)
goto out;
@@ -15111,7 +15367,7 @@
tg3_full_lock(tp, 0);
- tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_flag_set(tp, INIT_COMPLETE);
err = tg3_restart_hw(tp, 1);
if (err)
goto out;
@@ -15139,11 +15395,156 @@
#endif /* CONFIG_PM_SLEEP */
+/**
+ * tg3_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct tg3 *tp = netdev_priv(netdev);
+ pci_ers_result_t err = PCI_ERS_RESULT_NEED_RESET;
+
+ netdev_info(netdev, "PCI I/O error detected\n");
+
+ rtnl_lock();
+
+ if (!netif_running(netdev))
+ goto done;
+
+ tg3_phy_stop(tp);
+
+ tg3_netif_stop(tp);
+
+ del_timer_sync(&tp->timer);
+ tg3_flag_clear(tp, RESTART_TIMER);
+
+ /* Want to make sure that the reset task doesn't run */
+ cancel_work_sync(&tp->reset_task);
+ tg3_flag_clear(tp, TX_RECOVERY_PENDING);
+ tg3_flag_clear(tp, RESTART_TIMER);
+
+ netif_device_detach(netdev);
+
+ /* Clean up software state, even if MMIO is blocked */
+ tg3_full_lock(tp, 0);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
+ tg3_full_unlock(tp);
+
+done:
+ if (state == pci_channel_io_perm_failure)
+ err = PCI_ERS_RESULT_DISCONNECT;
+ else
+ pci_disable_device(pdev);
+
+ rtnl_unlock();
+
+ return err;
+}
+
+/**
+ * tg3_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ * At this point, the card has exprienced a hard reset,
+ * followed by fixups by BIOS, and has its config space
+ * set up identically to what it was at cold boot.
+ */
+static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct tg3 *tp = netdev_priv(netdev);
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+ int err;
+
+ rtnl_lock();
+
+ if (pci_enable_device(pdev)) {
+ netdev_err(netdev, "Cannot re-enable PCI device after reset.\n");
+ goto done;
+ }
+
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ if (!netif_running(netdev)) {
+ rc = PCI_ERS_RESULT_RECOVERED;
+ goto done;
+ }
+
+ err = tg3_power_up(tp);
+ if (err) {
+ netdev_err(netdev, "Failed to restore register access.\n");
+ goto done;
+ }
+
+ rc = PCI_ERS_RESULT_RECOVERED;
+
+done:
+ rtnl_unlock();
+
+ return rc;
+}
+
+/**
+ * tg3_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells
+ * us that its OK to resume normal operation.
+ */
+static void tg3_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct tg3 *tp = netdev_priv(netdev);
+ int err;
+
+ rtnl_lock();
+
+ if (!netif_running(netdev))
+ goto done;
+
+ tg3_full_lock(tp, 0);
+ tg3_flag_set(tp, INIT_COMPLETE);
+ err = tg3_restart_hw(tp, 1);
+ tg3_full_unlock(tp);
+ if (err) {
+ netdev_err(netdev, "Cannot restart hardware after reset.\n");
+ goto done;
+ }
+
+ netif_device_attach(netdev);
+
+ tp->timer.expires = jiffies + tp->timer_offset;
+ add_timer(&tp->timer);
+
+ tg3_netif_start(tp);
+
+ tg3_phy_start(tp);
+
+done:
+ rtnl_unlock();
+}
+
+static struct pci_error_handlers tg3_err_handler = {
+ .error_detected = tg3_io_error_detected,
+ .slot_reset = tg3_io_slot_reset,
+ .resume = tg3_io_resume
+};
+
static struct pci_driver tg3_driver = {
.name = DRV_MODULE_NAME,
.id_table = tg3_pci_tbl,
.probe = tg3_init_one,
.remove = __devexit_p(tg3_remove_one),
+ .err_handler = &tg3_err_handler,
.driver.pm = TG3_PM_OPS,
};
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5e96706..5b3d2f3 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -23,11 +23,13 @@
#define TG3_BDINFO_NIC_ADDR 0xcUL /* 32-bit */
#define TG3_BDINFO_SIZE 0x10UL
-#define TG3_RX_INTERNAL_RING_SZ_5906 32
-
-#define RX_STD_MAX_SIZE_5705 512
-#define RX_STD_MAX_SIZE_5717 2048
-#define RX_JUMBO_MAX_SIZE 0xdeadbeef /* XXX */
+#define TG3_RX_STD_MAX_SIZE_5700 512
+#define TG3_RX_STD_MAX_SIZE_5717 2048
+#define TG3_RX_JMB_MAX_SIZE_5700 256
+#define TG3_RX_JMB_MAX_SIZE_5717 1024
+#define TG3_RX_RET_MAX_SIZE_5700 1024
+#define TG3_RX_RET_MAX_SIZE_5705 512
+#define TG3_RX_RET_MAX_SIZE_5717 4096
/* First 256 bytes are a mirror of PCI config space. */
#define TG3PCI_VENDOR 0x00000000
@@ -54,6 +56,7 @@
#define TG3PCI_DEVICE_TIGON3_57791 0x16b2
#define TG3PCI_DEVICE_TIGON3_57795 0x16b6
#define TG3PCI_DEVICE_TIGON3_5719 0x1657
+#define TG3PCI_DEVICE_TIGON3_5720 0x165f
/* 0x04 --> 0x2c unused */
#define TG3PCI_SUBVENDOR_ID_BROADCOM PCI_VENDOR_ID_BROADCOM
#define TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6 0x1644
@@ -142,6 +145,7 @@
#define CHIPREV_ID_5717_A0 0x05717000
#define CHIPREV_ID_57765_A0 0x57785000
#define CHIPREV_ID_5719_A0 0x05719000
+#define CHIPREV_ID_5720_A0 0x05720000
#define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12)
#define ASIC_REV_5700 0x07
#define ASIC_REV_5701 0x00
@@ -163,6 +167,7 @@
#define ASIC_REV_5717 0x5717
#define ASIC_REV_57765 0x57785
#define ASIC_REV_5719 0x5719
+#define ASIC_REV_5720 0x5720
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
@@ -175,6 +180,7 @@
#define CHIPREV_5750_BX 0x41
#define CHIPREV_5784_AX 0x57840
#define CHIPREV_5761_AX 0x57610
+#define CHIPREV_57765_AX 0x577650
#define GET_METAL_REV(CHIP_REV_ID) ((CHIP_REV_ID) & 0xff)
#define METAL_REV_A0 0x00
#define METAL_REV_A1 0x01
@@ -183,6 +189,7 @@
#define METAL_REV_B2 0x02
#define TG3PCI_DMA_RW_CTRL 0x0000006c
#define DMA_RWCTRL_DIS_CACHE_ALIGNMENT 0x00000001
+#define DMA_RWCTRL_TAGGED_STAT_WA 0x00000080
#define DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK 0x00000380
#define DMA_RWCTRL_READ_BNDRY_MASK 0x00000700
#define DMA_RWCTRL_READ_BNDRY_DISAB 0x00000000
@@ -473,6 +480,8 @@
#define TX_MODE_BIG_BCKOFF_ENABLE 0x00000020
#define TX_MODE_LONG_PAUSE_ENABLE 0x00000040
#define TX_MODE_MBUF_LOCKUP_FIX 0x00000100
+#define TX_MODE_JMB_FRM_LEN 0x00400000
+#define TX_MODE_CNT_DN_MODE 0x00800000
#define MAC_TX_STATUS 0x00000460
#define TX_STATUS_XOFFED 0x00000001
#define TX_STATUS_SENT_XOFF 0x00000002
@@ -487,6 +496,8 @@
#define TX_LENGTHS_IPG_SHIFT 8
#define TX_LENGTHS_IPG_CRS_MASK 0x00003000
#define TX_LENGTHS_IPG_CRS_SHIFT 12
+#define TX_LENGTHS_JMB_FRM_LEN_MSK 0x00ff0000
+#define TX_LENGTHS_CNT_DWN_VAL_MSK 0xff000000
#define MAC_RX_MODE 0x00000468
#define RX_MODE_RESET 0x00000001
#define RX_MODE_ENABLE 0x00000002
@@ -1079,6 +1090,9 @@
#define CPMU_HST_ACC_MACCLK_6_25 0x00130000
/* 0x3620 --> 0x3630 unused */
+#define TG3_CPMU_CLCK_ORIDE 0x00003624
+#define CPMU_CLCK_ORIDE_MAC_ORIDE_EN 0x80000000
+
#define TG3_CPMU_CLCK_STAT 0x00003630
#define CPMU_CLCK_STAT_MAC_CLCK_MASK 0x001f0000
#define CPMU_CLCK_STAT_MAC_CLCK_62_5 0x00000000
@@ -1188,6 +1202,7 @@
#define HOSTCC_STATS_BLK_NIC_ADDR 0x00003c40
#define HOSTCC_STATUS_BLK_NIC_ADDR 0x00003c44
#define HOSTCC_FLOW_ATTN 0x00003c48
+#define HOSTCC_FLOW_ATTN_MBUF_LWM 0x00000040
/* 0x3c4c --> 0x3c50 unused */
#define HOSTCC_JUMBO_CON_IDX 0x00003c50
#define HOSTCC_STD_CON_IDX 0x00003c54
@@ -1321,6 +1336,7 @@
#define RDMAC_MODE_MULT_DMA_RD_DIS 0x01000000
#define RDMAC_MODE_IPV4_LSO_EN 0x08000000
#define RDMAC_MODE_IPV6_LSO_EN 0x10000000
+#define RDMAC_MODE_H2BNC_VLAN_DET 0x20000000
#define RDMAC_STATUS 0x00004804
#define RDMAC_STATUS_TGTABORT 0x00000004
#define RDMAC_STATUS_MSTABORT 0x00000008
@@ -1597,6 +1613,7 @@
#define MSGINT_MODE_ONE_SHOT_DISABLE 0x00000020
#define MSGINT_MODE_MULTIVEC_EN 0x00000080
#define MSGINT_STATUS 0x00006004
+#define MSGINT_STATUS_MSI_REQ 0x00000001
#define MSGINT_FIFO 0x00006008
/* 0x600c --> 0x6400 unused */
@@ -1613,6 +1630,8 @@
#define GRC_MODE_WSWAP_NONFRM_DATA 0x00000004
#define GRC_MODE_BSWAP_DATA 0x00000010
#define GRC_MODE_WSWAP_DATA 0x00000020
+#define GRC_MODE_BYTE_SWAP_B2HRX_DATA 0x00000040
+#define GRC_MODE_WORD_SWAP_B2HRX_DATA 0x00000080
#define GRC_MODE_SPLITHDR 0x00000100
#define GRC_MODE_NOFRM_CRACKING 0x00000200
#define GRC_MODE_INCL_CRC 0x00000400
@@ -1620,8 +1639,10 @@
#define GRC_MODE_NOIRQ_ON_SENDS 0x00002000
#define GRC_MODE_NOIRQ_ON_RCV 0x00004000
#define GRC_MODE_FORCE_PCI32BIT 0x00008000
+#define GRC_MODE_B2HRX_ENABLE 0x00008000
#define GRC_MODE_HOST_STACKUP 0x00010000
#define GRC_MODE_HOST_SENDBDS 0x00020000
+#define GRC_MODE_HTX2B_ENABLE 0x00040000
#define GRC_MODE_NO_TX_PHDR_CSUM 0x00100000
#define GRC_MODE_NVRAM_WR_ENABLE 0x00200000
#define GRC_MODE_PCIE_TL_SEL 0x00000000
@@ -1818,6 +1839,38 @@
#define FLASH_5717VENDOR_ATMEL_45USPT 0x03400000
#define FLASH_5717VENDOR_ST_25USPT 0x03400002
#define FLASH_5717VENDOR_ST_45USPT 0x03400001
+#define FLASH_5720_EEPROM_HD 0x00000001
+#define FLASH_5720_EEPROM_LD 0x00000003
+#define FLASH_5720VENDOR_M_ATMEL_DB011D 0x01000000
+#define FLASH_5720VENDOR_M_ATMEL_DB021D 0x01000002
+#define FLASH_5720VENDOR_M_ATMEL_DB041D 0x01000001
+#define FLASH_5720VENDOR_M_ATMEL_DB081D 0x01000003
+#define FLASH_5720VENDOR_M_ST_M25PE10 0x02000000
+#define FLASH_5720VENDOR_M_ST_M25PE20 0x02000002
+#define FLASH_5720VENDOR_M_ST_M25PE40 0x02000001
+#define FLASH_5720VENDOR_M_ST_M25PE80 0x02000003
+#define FLASH_5720VENDOR_M_ST_M45PE10 0x03000000
+#define FLASH_5720VENDOR_M_ST_M45PE20 0x03000002
+#define FLASH_5720VENDOR_M_ST_M45PE40 0x03000001
+#define FLASH_5720VENDOR_M_ST_M45PE80 0x03000003
+#define FLASH_5720VENDOR_A_ATMEL_DB011B 0x01800000
+#define FLASH_5720VENDOR_A_ATMEL_DB021B 0x01800002
+#define FLASH_5720VENDOR_A_ATMEL_DB041B 0x01800001
+#define FLASH_5720VENDOR_A_ATMEL_DB011D 0x01c00000
+#define FLASH_5720VENDOR_A_ATMEL_DB021D 0x01c00002
+#define FLASH_5720VENDOR_A_ATMEL_DB041D 0x01c00001
+#define FLASH_5720VENDOR_A_ATMEL_DB081D 0x01c00003
+#define FLASH_5720VENDOR_A_ST_M25PE10 0x02800000
+#define FLASH_5720VENDOR_A_ST_M25PE20 0x02800002
+#define FLASH_5720VENDOR_A_ST_M25PE40 0x02800001
+#define FLASH_5720VENDOR_A_ST_M25PE80 0x02800003
+#define FLASH_5720VENDOR_A_ST_M45PE10 0x02c00000
+#define FLASH_5720VENDOR_A_ST_M45PE20 0x02c00002
+#define FLASH_5720VENDOR_A_ST_M45PE40 0x02c00001
+#define FLASH_5720VENDOR_A_ST_M45PE80 0x02c00003
+#define FLASH_5720VENDOR_ATMEL_45USPT 0x03c00000
+#define FLASH_5720VENDOR_ST_25USPT 0x03c00002
+#define FLASH_5720VENDOR_ST_45USPT 0x03c00001
#define NVRAM_CFG1_5752PAGE_SIZE_MASK 0x70000000
#define FLASH_5752PAGE_SIZE_256 0x00000000
#define FLASH_5752PAGE_SIZE_512 0x10000000
@@ -1899,11 +1952,16 @@
/* Alternate PCIE definitions */
#define TG3_PCIE_TLDLPL_PORT 0x00007c00
+#define TG3_PCIE_DL_LO_FTSMAX 0x0000000c
+#define TG3_PCIE_DL_LO_FTSMAX_MSK 0x000000ff
+#define TG3_PCIE_DL_LO_FTSMAX_VAL 0x0000002c
#define TG3_PCIE_PL_LO_PHYCTL1 0x00000004
#define TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN 0x00001000
#define TG3_PCIE_PL_LO_PHYCTL5 0x00000014
#define TG3_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ 0x80000000
+#define TG3_REG_BLK_SIZE 0x00008000
+
/* OTP bit definitions */
#define TG3_OTP_AGCTGT_MASK 0x000000e0
#define TG3_OTP_AGCTGT_SHIFT 1
@@ -1955,7 +2013,9 @@
#define TG3_NVM_DIR_END 0x78
#define TG3_NVM_DIRENT_SIZE 0xc
#define TG3_NVM_DIRTYPE_SHIFT 24
+#define TG3_NVM_DIRTYPE_LENMSK 0x003fffff
#define TG3_NVM_DIRTYPE_ASFINI 1
+#define TG3_NVM_DIRTYPE_EXTVPD 20
#define TG3_NVM_PTREV_BCVER 0x94
#define TG3_NVM_BCVER_MAJMSK 0x0000ff00
#define TG3_NVM_BCVER_MAJSFT 8
@@ -2079,6 +2139,13 @@
#define NIC_SRAM_MBUF_POOL_BASE5705 0x00010000
#define NIC_SRAM_MBUF_POOL_SIZE5705 0x0000e000
+#define TG3_SRAM_RX_STD_BDCACHE_SIZE_5700 128
+#define TG3_SRAM_RX_STD_BDCACHE_SIZE_5755 64
+#define TG3_SRAM_RX_STD_BDCACHE_SIZE_5906 32
+
+#define TG3_SRAM_RX_JMB_BDCACHE_SIZE_5700 64
+#define TG3_SRAM_RX_JMB_BDCACHE_SIZE_5717 16
+
/* Currently this is fixed. */
#define TG3_PHY_MII_ADDR 0x01
@@ -2119,7 +2186,7 @@
#define MII_TG3_DSP_TAP26_OPCSINPT 0x0004
#define MII_TG3_DSP_AADJ1CH0 0x001f
#define MII_TG3_DSP_CH34TP2 0x4022
-#define MII_TG3_DSP_CH34TP2_HIBW01 0x0010
+#define MII_TG3_DSP_CH34TP2_HIBW01 0x017b
#define MII_TG3_DSP_AADJ1CH3 0x601f
#define MII_TG3_DSP_AADJ1CH3_ADCCKADJ 0x0002
#define MII_TG3_DSP_EXP1_INT_STAT 0x0f01
@@ -2132,19 +2199,26 @@
#define MII_TG3_AUX_CTRL 0x18 /* auxiliary control register */
+#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
+#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
+#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
+#define MII_TG3_AUXCTL_ACTL_EXTPKTLEN 0x4000
+
+#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL 0x0002
+#define MII_TG3_AUXCTL_PCTL_WOL_EN 0x0008
#define MII_TG3_AUXCTL_PCTL_100TX_LPWR 0x0010
#define MII_TG3_AUXCTL_PCTL_SPR_ISOLATE 0x0020
+#define MII_TG3_AUXCTL_PCTL_CL_AB_TXDAC 0x0040
#define MII_TG3_AUXCTL_PCTL_VREG_11V 0x0180
-#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL 0x0002
-#define MII_TG3_AUXCTL_MISC_WREN 0x8000
-#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
-#define MII_TG3_AUXCTL_MISC_RDSEL_MISC 0x7000
+#define MII_TG3_AUXCTL_SHDWSEL_MISCTEST 0x0004
+
#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+#define MII_TG3_AUXCTL_MISC_WIRESPD_EN 0x0010
+#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
+#define MII_TG3_AUXCTL_MISC_RDSEL_SHIFT 12
+#define MII_TG3_AUXCTL_MISC_WREN 0x8000
-#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
-#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
-#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
#define MII_TG3_AUX_STAT 0x19 /* auxiliary status register */
#define MII_TG3_AUX_STAT_LPASS 0x0004
@@ -2564,7 +2638,12 @@
tg3_stat64_t nic_avoided_irqs;
tg3_stat64_t nic_tx_threshold_hit;
- u8 __reserved4[0xb00-0x9c0];
+ /* NOT a part of the hardware statistics block format.
+ * These stats are here as storage for tg3_periodic_fetch_stats().
+ */
+ tg3_stat64_t mbuf_lwm_thresh_hit;
+
+ u8 __reserved4[0xb00-0x9c8];
};
/* 'mapping' is superfluous as the chip does not write into
@@ -2696,6 +2775,8 @@
u64 nic_irqs;
u64 nic_avoided_irqs;
u64 nic_tx_threshold_hit;
+
+ u64 mbuf_lwm_thresh_hit;
};
struct tg3_rx_prodring_set {
@@ -2745,6 +2826,86 @@
unsigned int irq_vec;
};
+enum TG3_FLAGS {
+ TG3_FLAG_TAGGED_STATUS = 0,
+ TG3_FLAG_TXD_MBOX_HWBUG,
+ TG3_FLAG_USE_LINKCHG_REG,
+ TG3_FLAG_ERROR_PROCESSED,
+ TG3_FLAG_ENABLE_ASF,
+ TG3_FLAG_ASPM_WORKAROUND,
+ TG3_FLAG_POLL_SERDES,
+ TG3_FLAG_MBOX_WRITE_REORDER,
+ TG3_FLAG_PCIX_TARGET_HWBUG,
+ TG3_FLAG_WOL_SPEED_100MB,
+ TG3_FLAG_WOL_ENABLE,
+ TG3_FLAG_EEPROM_WRITE_PROT,
+ TG3_FLAG_NVRAM,
+ TG3_FLAG_NVRAM_BUFFERED,
+ TG3_FLAG_SUPPORT_MSI,
+ TG3_FLAG_SUPPORT_MSIX,
+ TG3_FLAG_PCIX_MODE,
+ TG3_FLAG_PCI_HIGH_SPEED,
+ TG3_FLAG_PCI_32BIT,
+ TG3_FLAG_SRAM_USE_CONFIG,
+ TG3_FLAG_TX_RECOVERY_PENDING,
+ TG3_FLAG_WOL_CAP,
+ TG3_FLAG_JUMBO_RING_ENABLE,
+ TG3_FLAG_PAUSE_AUTONEG,
+ TG3_FLAG_CPMU_PRESENT,
+ TG3_FLAG_40BIT_DMA_BUG,
+ TG3_FLAG_BROKEN_CHECKSUMS,
+ TG3_FLAG_JUMBO_CAPABLE,
+ TG3_FLAG_CHIP_RESETTING,
+ TG3_FLAG_INIT_COMPLETE,
+ TG3_FLAG_RESTART_TIMER,
+ TG3_FLAG_TSO_BUG,
+ TG3_FLAG_IS_5788,
+ TG3_FLAG_MAX_RXPEND_64,
+ TG3_FLAG_TSO_CAPABLE,
+ TG3_FLAG_PCI_EXPRESS,
+ TG3_FLAG_ASF_NEW_HANDSHAKE,
+ TG3_FLAG_HW_AUTONEG,
+ TG3_FLAG_IS_NIC,
+ TG3_FLAG_FLASH,
+ TG3_FLAG_HW_TSO_1,
+ TG3_FLAG_5705_PLUS,
+ TG3_FLAG_5750_PLUS,
+ TG3_FLAG_HW_TSO_3,
+ TG3_FLAG_USING_MSI,
+ TG3_FLAG_USING_MSIX,
+ TG3_FLAG_ICH_WORKAROUND,
+ TG3_FLAG_5780_CLASS,
+ TG3_FLAG_HW_TSO_2,
+ TG3_FLAG_1SHOT_MSI,
+ TG3_FLAG_NO_FWARE_REPORTED,
+ TG3_FLAG_NO_NVRAM_ADDR_TRANS,
+ TG3_FLAG_ENABLE_APE,
+ TG3_FLAG_PROTECTED_NVRAM,
+ TG3_FLAG_5701_DMA_BUG,
+ TG3_FLAG_USE_PHYLIB,
+ TG3_FLAG_MDIOBUS_INITED,
+ TG3_FLAG_LRG_PROD_RING_CAP,
+ TG3_FLAG_RGMII_INBAND_DISABLE,
+ TG3_FLAG_RGMII_EXT_IBND_RX_EN,
+ TG3_FLAG_RGMII_EXT_IBND_TX_EN,
+ TG3_FLAG_CLKREQ_BUG,
+ TG3_FLAG_5755_PLUS,
+ TG3_FLAG_NO_NVRAM,
+ TG3_FLAG_ENABLE_RSS,
+ TG3_FLAG_ENABLE_TSS,
+ TG3_FLAG_4G_DMA_BNDRY_BUG,
+ TG3_FLAG_40BIT_DMA_LIMIT_BUG,
+ TG3_FLAG_SHORT_DMA_BUG,
+ TG3_FLAG_USE_JUMBO_BDFLAG,
+ TG3_FLAG_L1PLLPD_EN,
+ TG3_FLAG_57765_PLUS,
+ TG3_FLAG_APE_HAS_NCSI,
+ TG3_FLAG_5717_PLUS,
+
+ /* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
+ TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */
+};
+
struct tg3 {
/* begin "general, frequently-used members" cacheline section */
@@ -2768,7 +2929,7 @@
/* SMP locking strategy:
*
* lock: Held during reset, PHY access, timer, and when
- * updating tg3_flags and tg3_flags2.
+ * updating tg3_flags.
*
* netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds
* netif_tx_lock when it needs to call
@@ -2825,94 +2986,13 @@
struct tg3_ethtool_stats estats;
struct tg3_ethtool_stats estats_prev;
+ DECLARE_BITMAP(tg3_flags, TG3_FLAG_NUMBER_OF_FLAGS);
+
union {
unsigned long phy_crc_errors;
unsigned long last_event_jiffies;
};
- u32 tg3_flags;
-#define TG3_FLAG_TAGGED_STATUS 0x00000001
-#define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002
-#define TG3_FLAG_RX_CHECKSUMS 0x00000004
-#define TG3_FLAG_USE_LINKCHG_REG 0x00000008
-#define TG3_FLAG_ENABLE_ASF 0x00000020
-#define TG3_FLAG_ASPM_WORKAROUND 0x00000040
-#define TG3_FLAG_POLL_SERDES 0x00000080
-#define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100
-#define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200
-#define TG3_FLAG_WOL_SPEED_100MB 0x00000400
-#define TG3_FLAG_WOL_ENABLE 0x00000800
-#define TG3_FLAG_EEPROM_WRITE_PROT 0x00001000
-#define TG3_FLAG_NVRAM 0x00002000
-#define TG3_FLAG_NVRAM_BUFFERED 0x00004000
-#define TG3_FLAG_SUPPORT_MSI 0x00008000
-#define TG3_FLAG_SUPPORT_MSIX 0x00010000
-#define TG3_FLAG_SUPPORT_MSI_OR_MSIX (TG3_FLAG_SUPPORT_MSI | \
- TG3_FLAG_SUPPORT_MSIX)
-#define TG3_FLAG_PCIX_MODE 0x00020000
-#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
-#define TG3_FLAG_PCI_32BIT 0x00080000
-#define TG3_FLAG_SRAM_USE_CONFIG 0x00100000
-#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
-#define TG3_FLAG_WOL_CAP 0x00400000
-#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
-#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
-#define TG3_FLAG_CPMU_PRESENT 0x04000000
-#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
-#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
-#define TG3_FLAG_JUMBO_CAPABLE 0x20000000
-#define TG3_FLAG_CHIP_RESETTING 0x40000000
-#define TG3_FLAG_INIT_COMPLETE 0x80000000
- u32 tg3_flags2;
-#define TG3_FLG2_RESTART_TIMER 0x00000001
-#define TG3_FLG2_TSO_BUG 0x00000002
-#define TG3_FLG2_IS_5788 0x00000008
-#define TG3_FLG2_MAX_RXPEND_64 0x00000010
-#define TG3_FLG2_TSO_CAPABLE 0x00000020
-#define TG3_FLG2_PCI_EXPRESS 0x00000200
-#define TG3_FLG2_ASF_NEW_HANDSHAKE 0x00000400
-#define TG3_FLG2_HW_AUTONEG 0x00000800
-#define TG3_FLG2_IS_NIC 0x00001000
-#define TG3_FLG2_FLASH 0x00008000
-#define TG3_FLG2_HW_TSO_1 0x00010000
-#define TG3_FLG2_5705_PLUS 0x00040000
-#define TG3_FLG2_5750_PLUS 0x00080000
-#define TG3_FLG2_HW_TSO_3 0x00100000
-#define TG3_FLG2_USING_MSI 0x00200000
-#define TG3_FLG2_USING_MSIX 0x00400000
-#define TG3_FLG2_USING_MSI_OR_MSIX (TG3_FLG2_USING_MSI | \
- TG3_FLG2_USING_MSIX)
-#define TG3_FLG2_ICH_WORKAROUND 0x02000000
-#define TG3_FLG2_5780_CLASS 0x04000000
-#define TG3_FLG2_HW_TSO_2 0x08000000
-#define TG3_FLG2_HW_TSO (TG3_FLG2_HW_TSO_1 | \
- TG3_FLG2_HW_TSO_2 | \
- TG3_FLG2_HW_TSO_3)
-#define TG3_FLG2_1SHOT_MSI 0x10000000
-#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
- u32 tg3_flags3;
-#define TG3_FLG3_NO_NVRAM_ADDR_TRANS 0x00000001
-#define TG3_FLG3_ENABLE_APE 0x00000002
-#define TG3_FLG3_PROTECTED_NVRAM 0x00000004
-#define TG3_FLG3_5701_DMA_BUG 0x00000008
-#define TG3_FLG3_USE_PHYLIB 0x00000010
-#define TG3_FLG3_MDIOBUS_INITED 0x00000020
-#define TG3_FLG3_RGMII_INBAND_DISABLE 0x00000100
-#define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200
-#define TG3_FLG3_RGMII_EXT_IBND_TX_EN 0x00000400
-#define TG3_FLG3_CLKREQ_BUG 0x00000800
-#define TG3_FLG3_5755_PLUS 0x00002000
-#define TG3_FLG3_NO_NVRAM 0x00004000
-#define TG3_FLG3_ENABLE_RSS 0x00020000
-#define TG3_FLG3_ENABLE_TSS 0x00040000
-#define TG3_FLG3_4G_DMA_BNDRY_BUG 0x00080000
-#define TG3_FLG3_40BIT_DMA_LIMIT_BUG 0x00100000
-#define TG3_FLG3_SHORT_DMA_BUG 0x00200000
-#define TG3_FLG3_USE_JUMBO_BDFLAG 0x00400000
-#define TG3_FLG3_L1PLLPD_EN 0x00800000
-#define TG3_FLG3_5717_PLUS 0x01000000
-#define TG3_FLG3_APE_HAS_NCSI 0x02000000
-
struct timer_list timer;
u16 timer_counter;
u16 timer_multiplier;
@@ -2983,6 +3063,7 @@
#define TG3_PHY_ID_BCM5718S 0xbc050ff0
#define TG3_PHY_ID_BCM57765 0x5c0d8a40
#define TG3_PHY_ID_BCM5719C 0x5c0d8a20
+#define TG3_PHY_ID_BCM5720C 0x5c0d8b60
#define TG3_PHY_ID_BCM5906 0xdc00ac40
#define TG3_PHY_ID_BCM8002 0x60010140
#define TG3_PHY_ID_INVALID 0xffffffff
@@ -3049,6 +3130,7 @@
int nvram_lock_cnt;
u32 nvram_size;
+#define TG3_NVRAM_SIZE_2KB 0x00000800
#define TG3_NVRAM_SIZE_64KB 0x00010000
#define TG3_NVRAM_SIZE_128KB 0x00020000
#define TG3_NVRAM_SIZE_256KB 0x00040000
@@ -3064,6 +3146,9 @@
#define JEDEC_SAIFUN 0x4f
#define JEDEC_SST 0xbf
+#define ATMEL_AT24C02_CHIP_SIZE TG3_NVRAM_SIZE_2KB
+#define ATMEL_AT24C02_PAGE_SIZE (8)
+
#define ATMEL_AT24C64_CHIP_SIZE TG3_NVRAM_SIZE_64KB
#define ATMEL_AT24C64_PAGE_SIZE (32)
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 0825db6..1e980fd 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -1930,7 +1930,7 @@
unsigned int len = skb->len;
unsigned char *data = skb->data;
- unsigned int csum_start = skb->csum_start - skb_headroom(skb);
+ unsigned int csum_start = skb_checksum_start_offset(skb);
lepp_frag_t frags[LEPP_MAX_FRAGS];
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 2bedc0a..1313aa1 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -727,7 +727,7 @@
return 0;
}
-static short madgemc_adapter_ids[] __initdata = {
+static const short madgemc_adapter_ids[] __devinitconst = {
0x002d,
0x0000
};
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 2684003..e3855ae 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -86,6 +86,7 @@
#include <linux/timer.h>
#include <linux/in.h>
#include <linux/ioport.h>
+#include <linux/seq_file.h>
#include <linux/string.h>
#include <linux/proc_fs.h>
#include <linux/ptrace.h>
@@ -193,7 +194,7 @@
static int olympic_change_mtu(struct net_device *dev, int mtu);
static void olympic_srb_bh(struct net_device *dev) ;
static void olympic_asb_bh(struct net_device *dev) ;
-static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ;
+static const struct file_operations olympic_proc_ops;
static const struct net_device_ops olympic_netdev_ops = {
.ndo_open = olympic_open,
@@ -272,7 +273,7 @@
char proc_name[20] ;
strcpy(proc_name,"olympic_") ;
strcat(proc_name,dev->name) ;
- create_proc_read_entry(proc_name,0,init_net.proc_net,olympic_proc_info,(void *)dev) ;
+ proc_create_data(proc_name, 0, init_net.proc_net, &olympic_proc_ops, dev);
printk("Olympic: Network Monitor information: /proc/%s\n",proc_name);
}
return 0 ;
@@ -1615,29 +1616,25 @@
return 0 ;
}
-static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+static int olympic_proc_show(struct seq_file *m, void *v)
{
- struct net_device *dev = (struct net_device *)data ;
+ struct net_device *dev = m->private;
struct olympic_private *olympic_priv=netdev_priv(dev);
u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ;
u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ;
- int size = 0 ;
- int len=0;
- off_t begin=0;
- off_t pos=0;
u8 addr[6];
u8 addr2[6];
int i;
- size = sprintf(buffer,
+ seq_printf(m,
"IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name);
- size += sprintf(buffer+size, "\n%6s: Adapter Address : Node Address : Functional Addr\n",
+ seq_printf(m, "\n%6s: Adapter Address : Node Address : Functional Addr\n",
dev->name);
for (i = 0 ; i < 6 ; i++)
addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr) + i);
- size += sprintf(buffer+size, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n",
+ seq_printf(m, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n",
dev->name,
dev->dev_addr, addr,
readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),
@@ -1645,9 +1642,9 @@
readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
- size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name);
+ seq_printf(m, "\n%6s: Token Ring Parameters Table:\n", dev->name);
- size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n",
+ seq_printf(m, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n",
dev->name) ;
for (i = 0 ; i < 6 ; i++)
@@ -1655,7 +1652,7 @@
for (i = 0 ; i < 6 ; i++)
addr2[i] = readb(opt+offsetof(struct olympic_parameters_table, poll_addr) + i);
- size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n",
+ seq_printf(m, "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n",
dev->name,
readb(opt+offsetof(struct olympic_parameters_table, phys_addr)),
readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1),
@@ -1666,12 +1663,12 @@
swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))),
swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code))));
- size += sprintf(buffer+size, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
+ seq_printf(m, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
dev->name) ;
for (i = 0 ; i < 6 ; i++)
addr[i] = readb(opt+offsetof(struct olympic_parameters_table, source_addr) + i);
- size += sprintf(buffer+size, "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n",
+ seq_printf(m, "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n",
dev->name, addr,
swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))),
swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))),
@@ -1680,12 +1677,12 @@
swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))),
swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl))));
- size += sprintf(buffer+size, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n",
+ seq_printf(m, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n",
dev->name) ;
for (i = 0 ; i < 6 ; i++)
addr[i] = readb(opt+offsetof(struct olympic_parameters_table, beacon_naun) + i);
- size += sprintf(buffer+size, "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n",
+ seq_printf(m, "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n",
dev->name,
swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))),
swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))),
@@ -1695,19 +1692,21 @@
readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2),
readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3));
- len=size;
- pos=begin+size;
- if (pos<offset) {
- len=0;
- begin=pos;
- }
- *start=buffer+(offset-begin); /* Start of wanted data */
- len-=(offset-begin); /* Start slop */
- if(len>length)
- len=length; /* Ending slop */
- return len;
+ return 0;
}
+static int olympic_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, olympic_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations olympic_proc_ops = {
+ .open = olympic_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static void __devexit olympic_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev) ;
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 007d8e7..092c3fa 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -122,8 +122,8 @@
tp->nway = tp->mediasense = 1;
tp->nwayset = tp->lpar = 0;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%08x\n",
- dev->name, csr14);
+ netdev_dbg(dev, "Restarting 21143 autonegotiation, csr14=%08x\n",
+ csr14);
iowrite32(0x0001, ioaddr + CSR13);
udelay(100);
iowrite32(csr14, ioaddr + CSR14);
@@ -206,14 +206,14 @@
#if 0 /* Restart shouldn't be needed. */
iowrite32(tp->csr6 | RxOn, ioaddr + CSR6);
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Restarting Tx and Rx, CSR5 is %08x\n",
- dev->name, ioread32(ioaddr + CSR5));
+ netdev_dbg(dev, " Restarting Tx and Rx, CSR5 is %08x\n",
+ ioread32(ioaddr + CSR5));
#endif
tulip_start_rxtx(tp);
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n",
- dev->name, tp->csr6, ioread32(ioaddr + CSR6),
- ioread32(ioaddr + CSR12));
+ netdev_dbg(dev, " Setting CSR6 %08x/%x CSR12 %08x\n",
+ tp->csr6, ioread32(ioaddr + CSR6),
+ ioread32(ioaddr + CSR12));
} else if ((tp->nwayset && (csr5 & 0x08000000) &&
(dev->if_port == 3 || dev->if_port == 5) &&
(csr12 & 2) == 2) ||
diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile
index 200cbf7..5e8be38 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/tulip/Makefile
@@ -2,6 +2,8 @@
# Makefile for the Linux "Tulip" family network device drivers.
#
+ccflags-$(CONFIG_NET_TULIP) := -DDEBUG
+
obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o
obj-$(CONFIG_DM9102) += dmfe.o
obj-$(CONFIG_WINBOND_840) += winbond-840.o
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index b13c6b0..e2f6923 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -27,6 +27,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "de2104x"
#define DRV_VERSION "0.7"
#define DRV_RELDATE "Mar 17, 2004"
@@ -51,7 +53,7 @@
/* These identify the driver base version and may not be removed. */
static char version[] =
-KERN_INFO DRV_NAME " PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
+"PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")";
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("Intel/Digital 21040/1 series PCI Ethernet driver");
@@ -73,8 +75,6 @@
module_param (rx_copybreak, int, 0);
MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copied");
-#define PFX DRV_NAME ": "
-
#define DE_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK | \
@@ -377,18 +377,16 @@
static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
u32 status, u32 len)
{
- if (netif_msg_rx_err (de))
- printk (KERN_DEBUG
- "%s: rx err, slot %d status 0x%x len %d\n",
- de->dev->name, rx_tail, status, len);
+ netif_dbg(de, rx_err, de->dev,
+ "rx err, slot %d status 0x%x len %d\n",
+ rx_tail, status, len);
if ((status & 0x38000300) != 0x0300) {
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
- if (netif_msg_rx_err(de))
- dev_warn(&de->dev->dev,
- "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
- status);
+ netif_warn(de, rx_err, de->dev,
+ "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+ status);
de->net_stats.rx_length_errors++;
}
} else if (status & RxError) {
@@ -435,10 +433,9 @@
copying_skb = (len <= rx_copybreak);
- if (unlikely(netif_msg_rx_status(de)))
- printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d copying? %d\n",
- de->dev->name, rx_tail, status, len,
- copying_skb);
+ netif_dbg(de, rx_status, de->dev,
+ "rx slot %d status 0x%x len %d copying? %d\n",
+ rx_tail, status, len, copying_skb);
buflen = copying_skb ? (len + RX_OFFSET) : de->rx_buf_sz;
copy_skb = dev_alloc_skb (buflen);
@@ -491,7 +488,7 @@
}
if (!rx_work)
- dev_warn(&de->dev->dev, "rx work limit reached\n");
+ netdev_warn(de->dev, "rx work limit reached\n");
de->rx_tail = rx_tail;
}
@@ -506,10 +503,9 @@
if ((!(status & (IntrOK|IntrErr))) || (status == 0xFFFF))
return IRQ_NONE;
- if (netif_msg_intr(de))
- printk(KERN_DEBUG "%s: intr, status %08x mode %08x desc %u/%u/%u\n",
- dev->name, status, dr32(MacMode),
- de->rx_tail, de->tx_head, de->tx_tail);
+ netif_dbg(de, intr, dev, "intr, status %08x mode %08x desc %u/%u/%u\n",
+ status, dr32(MacMode),
+ de->rx_tail, de->tx_head, de->tx_tail);
dw32(MacStatus, status);
@@ -534,9 +530,9 @@
pci_read_config_word(de->pdev, PCI_STATUS, &pci_status);
pci_write_config_word(de->pdev, PCI_STATUS, pci_status);
- dev_err(&de->dev->dev,
- "PCI bus error, status=%08x, PCI status=%04x\n",
- status, pci_status);
+ netdev_err(de->dev,
+ "PCI bus error, status=%08x, PCI status=%04x\n",
+ status, pci_status);
}
return IRQ_HANDLED;
@@ -572,9 +568,9 @@
if (status & LastFrag) {
if (status & TxError) {
- if (netif_msg_tx_err(de))
- printk(KERN_DEBUG "%s: tx err, status 0x%x\n",
- de->dev->name, status);
+ netif_dbg(de, tx_err, de->dev,
+ "tx err, status 0x%x\n",
+ status);
de->net_stats.tx_errors++;
if (status & TxOWC)
de->net_stats.tx_window_errors++;
@@ -587,9 +583,8 @@
} else {
de->net_stats.tx_packets++;
de->net_stats.tx_bytes += skb->len;
- if (netif_msg_tx_done(de))
- printk(KERN_DEBUG "%s: tx done, slot %d\n",
- de->dev->name, tx_tail);
+ netif_dbg(de, tx_done, de->dev,
+ "tx done, slot %d\n", tx_tail);
}
dev_kfree_skb_irq(skb);
}
@@ -646,9 +641,8 @@
wmb();
de->tx_head = NEXT_TX(entry);
- if (netif_msg_tx_queued(de))
- printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n",
- dev->name, entry, skb->len);
+ netif_dbg(de, tx_queued, dev, "tx queued, slot %d, skblen %d\n",
+ entry, skb->len);
if (tx_free == 0)
netif_stop_queue(dev);
@@ -873,7 +867,7 @@
udelay(100);
}
- dev_warn(&de->dev->dev, "timeout expired stopping DMA\n");
+ netdev_warn(de->dev, "timeout expired, stopping DMA\n");
}
static inline void de_start_rxtx (struct de_private *de)
@@ -907,9 +901,8 @@
{
if (!netif_carrier_ok(de->dev)) {
netif_carrier_on(de->dev);
- if (netif_msg_link(de))
- dev_info(&de->dev->dev, "link up, media %s\n",
- media_name[de->media_type]);
+ netif_info(de, link, de->dev, "link up, media %s\n",
+ media_name[de->media_type]);
}
}
@@ -917,8 +910,7 @@
{
if (netif_carrier_ok(de->dev)) {
netif_carrier_off(de->dev);
- if (netif_msg_link(de))
- dev_info(&de->dev->dev, "link down\n");
+ netif_info(de, link, de->dev, "link down\n");
}
}
@@ -928,8 +920,7 @@
u32 macmode = dr32(MacMode);
if (de_is_running(de))
- dev_warn(&de->dev->dev,
- "chip is running while changing media!\n");
+ netdev_warn(de->dev, "chip is running while changing media!\n");
if (de->de21040)
dw32(CSR11, FULL_DUPLEX_MAGIC);
@@ -948,18 +939,13 @@
else
macmode &= ~FullDuplex;
- if (netif_msg_link(de))
- dev_info(&de->dev->dev, "set link %s\n", media_name[media]);
- if (netif_msg_hw(de)) {
- dev_info(&de->dev->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
- dr32(MacMode), dr32(SIAStatus),
- dr32(CSR13), dr32(CSR14), dr32(CSR15));
-
- dev_info(&de->dev->dev,
- "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
- macmode, de->media[media].csr13,
- de->media[media].csr14, de->media[media].csr15);
- }
+ netif_info(de, link, de->dev, "set link %s\n", media_name[media]);
+ netif_info(de, hw, de->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
+ dr32(MacMode), dr32(SIAStatus),
+ dr32(CSR13), dr32(CSR14), dr32(CSR15));
+ netif_info(de, hw, de->dev, "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+ macmode, de->media[media].csr13,
+ de->media[media].csr14, de->media[media].csr15);
if (macmode != dr32(MacMode))
dw32(MacMode, macmode);
}
@@ -996,9 +982,8 @@
if (!netif_carrier_ok(dev))
de_link_up(de);
else
- if (netif_msg_timer(de))
- dev_info(&dev->dev, "%s link ok, status %x\n",
- media_name[de->media_type], status);
+ netif_info(de, timer, dev, "%s link ok, status %x\n",
+ media_name[de->media_type], status);
return;
}
@@ -1025,9 +1010,8 @@
de->media_timer.expires = jiffies + DE_TIMER_NO_LINK;
add_timer(&de->media_timer);
- if (netif_msg_timer(de))
- dev_info(&dev->dev, "no link, trying media %s, status %x\n",
- media_name[de->media_type], status);
+ netif_info(de, timer, dev, "no link, trying media %s, status %x\n",
+ media_name[de->media_type], status);
}
static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media)
@@ -1085,11 +1069,10 @@
if (!netif_carrier_ok(dev))
de_link_up(de);
else
- if (netif_msg_timer(de))
- dev_info(&dev->dev,
- "%s link ok, mode %x status %x\n",
- media_name[de->media_type],
- dr32(MacMode), status);
+ netif_info(de, timer, dev,
+ "%s link ok, mode %x status %x\n",
+ media_name[de->media_type],
+ dr32(MacMode), status);
return;
}
@@ -1163,9 +1146,8 @@
de->media_timer.expires = jiffies + DE_TIMER_NO_LINK;
add_timer(&de->media_timer);
- if (netif_msg_timer(de))
- dev_info(&dev->dev, "no link, trying media %s, status %x\n",
- media_name[de->media_type], status);
+ netif_info(de, timer, dev, "no link, trying media %s, status %x\n",
+ media_name[de->media_type], status);
}
static void de_media_interrupt (struct de_private *de, u32 status)
@@ -1401,14 +1383,13 @@
struct de_private *de = netdev_priv(dev);
int rc;
- if (netif_msg_ifup(de))
- printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
+ netif_dbg(de, ifup, dev, "enabling interface\n");
de->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
rc = de_alloc_rings(de);
if (rc) {
- dev_err(&dev->dev, "ring allocation failure, err=%d\n", rc);
+ netdev_err(dev, "ring allocation failure, err=%d\n", rc);
return rc;
}
@@ -1416,14 +1397,14 @@
rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
if (rc) {
- dev_err(&dev->dev, "IRQ %d request failure, err=%d\n",
- dev->irq, rc);
+ netdev_err(dev, "IRQ %d request failure, err=%d\n",
+ dev->irq, rc);
goto err_out_free;
}
rc = de_init_hw(de);
if (rc) {
- dev_err(&dev->dev, "h/w init failure, err=%d\n", rc);
+ netdev_err(dev, "h/w init failure, err=%d\n", rc);
goto err_out_free_irq;
}
@@ -1444,8 +1425,7 @@
struct de_private *de = netdev_priv(dev);
unsigned long flags;
- if (netif_msg_ifdown(de))
- printk(KERN_DEBUG "%s: disabling interface\n", dev->name);
+ netif_dbg(de, ifdown, dev, "disabling interface\n");
del_timer_sync(&de->media_timer);
@@ -1466,9 +1446,9 @@
{
struct de_private *de = netdev_priv(dev);
- printk(KERN_DEBUG "%s: NIC status %08x mode %08x sia %08x desc %u/%u/%u\n",
- dev->name, dr32(MacStatus), dr32(MacMode), dr32(SIAStatus),
- de->rx_tail, de->tx_head, de->tx_tail);
+ netdev_dbg(dev, "NIC status %08x mode %08x sia %08x desc %u/%u/%u\n",
+ dr32(MacStatus), dr32(MacMode), dr32(SIAStatus),
+ de->rx_tail, de->tx_head, de->tx_tail);
del_timer_sync(&de->media_timer);
@@ -1518,18 +1498,17 @@
switch (de->media_type) {
case DE_MEDIA_AUI:
ecmd->port = PORT_AUI;
- ecmd->speed = 5;
break;
case DE_MEDIA_BNC:
ecmd->port = PORT_BNC;
- ecmd->speed = 2;
break;
default:
ecmd->port = PORT_TP;
- ecmd->speed = SPEED_10;
break;
}
+ ethtool_cmd_speed_set(ecmd, 10);
+
if (dr32(MacMode) & FullDuplex)
ecmd->duplex = DUPLEX_FULL;
else
@@ -1550,9 +1529,7 @@
u32 new_media;
unsigned int media_lock;
- if (ecmd->speed != SPEED_10 && ecmd->speed != 5 && ecmd->speed != 2)
- return -EINVAL;
- if (de->de21040 && ecmd->speed == 2)
+ if (ethtool_cmd_speed(ecmd) != 10)
return -EINVAL;
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
return -EINVAL;
@@ -1696,9 +1673,8 @@
status = dr32(SIAStatus);
dw32(SIAStatus, (status & ~NWayState) | NWayRestart);
- if (netif_msg_link(de))
- dev_info(&de->dev->dev, "link nway restart, status %x,%x\n",
- status, dr32(SIAStatus));
+ netif_info(de, link, dev, "link nway restart, status %x,%x\n",
+ status, dr32(SIAStatus));
return 0;
}
@@ -1743,7 +1719,8 @@
de->dev->dev_addr[i] = value;
udelay(1);
if (boguscnt <= 0)
- pr_warning(PFX "timeout reading 21040 MAC address byte %u\n", i);
+ pr_warn("timeout reading 21040 MAC address byte %u\n",
+ i);
}
}
@@ -1929,8 +1906,10 @@
de->media[idx].csr14,
de->media[idx].csr15);
- } else if (netif_msg_probe(de))
- pr_cont("\n");
+ } else {
+ if (netif_msg_probe(de))
+ pr_cont("\n");
+ }
if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3]))
break;
@@ -1999,7 +1978,7 @@
#ifndef MODULE
if (board_idx == 0)
- printk("%s", version);
+ pr_info("%s\n", version);
#endif
/* allocate a new ethernet device structure, and fill in defaults */
@@ -2041,7 +2020,7 @@
/* check for invalid IRQ value */
if (pdev->irq < 2) {
rc = -EIO;
- pr_err(PFX "invalid irq (%d) for pci dev %s\n",
+ pr_err("invalid irq (%d) for pci dev %s\n",
pdev->irq, pci_name(pdev));
goto err_out_res;
}
@@ -2052,12 +2031,12 @@
pciaddr = pci_resource_start(pdev, 1);
if (!pciaddr) {
rc = -EIO;
- pr_err(PFX "no MMIO resource for pci dev %s\n", pci_name(pdev));
+ pr_err("no MMIO resource for pci dev %s\n", pci_name(pdev));
goto err_out_res;
}
if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) {
rc = -EIO;
- pr_err(PFX "MMIO resource (%llx) too small on pci dev %s\n",
+ pr_err("MMIO resource (%llx) too small on pci dev %s\n",
(unsigned long long)pci_resource_len(pdev, 1),
pci_name(pdev));
goto err_out_res;
@@ -2067,7 +2046,7 @@
regs = ioremap_nocache(pciaddr, DE_REGS_SIZE);
if (!regs) {
rc = -EIO;
- pr_err(PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
+ pr_err("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
(unsigned long long)pci_resource_len(pdev, 1),
pciaddr, pci_name(pdev));
goto err_out_res;
@@ -2080,7 +2059,7 @@
/* make sure hardware is not running */
rc = de_reset_mac(de);
if (rc) {
- pr_err(PFX "Cannot reset MAC, pci dev %s\n", pci_name(pdev));
+ pr_err("Cannot reset MAC, pci dev %s\n", pci_name(pdev));
goto err_out_iomap;
}
@@ -2100,11 +2079,11 @@
goto err_out_iomap;
/* print info about board and interface just registered */
- dev_info(&dev->dev, "%s at 0x%lx, %pM, IRQ %d\n",
- de->de21040 ? "21040" : "21041",
- dev->base_addr,
- dev->dev_addr,
- dev->irq);
+ netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+ de->de21040 ? "21040" : "21041",
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
pci_set_drvdata(pdev, dev);
@@ -2192,7 +2171,7 @@
if (!netif_running(dev))
goto out_attach;
if ((retval = pci_enable_device(pdev))) {
- dev_err(&dev->dev, "pci_enable_device failed in resume\n");
+ netdev_err(dev, "pci_enable_device failed in resume\n");
goto out;
}
pci_set_master(pdev);
@@ -2221,7 +2200,7 @@
static int __init de_init (void)
{
#ifdef MODULE
- printk("%s", version);
+ pr_info("%s\n", version);
#endif
return pci_register_driver(&de_driver);
}
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index efaa1d6..45144d5 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1995,7 +1995,7 @@
static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
-static int __init de4x5_eisa_probe (struct device *gendev)
+static int __devinit de4x5_eisa_probe (struct device *gendev)
{
struct eisa_device *edev;
u_long iobase;
@@ -2097,7 +2097,7 @@
return 0;
}
-static struct eisa_device_id de4x5_eisa_ids[] = {
+static const struct eisa_device_id de4x5_eisa_ids[] __devinitconst = {
{ "DEC4250", 0 }, /* 0 is the board name index... */
{ "" }
};
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index fb07f48..4685127 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -295,8 +295,7 @@
/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
static const char version[] __devinitconst =
- KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version "
- DRV_VERSION " (" DRV_RELDATE ")\n";
+ "Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
static int dmfe_debug;
static unsigned char dmfe_media_mode = DMFE_AUTO;
@@ -381,7 +380,7 @@
DMFE_DBUG(0, "dmfe_init_one()", 0);
if (!printed_version++)
- printk(version);
+ pr_info("%s\n", version);
/*
* SPARC on-board DM910x chips should be handled by the main
@@ -406,7 +405,7 @@
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- pr_warning("32-bit PCI DMA not available\n");
+ pr_warn("32-bit PCI DMA not available\n");
err = -ENODEV;
goto err_out_free;
}
@@ -2203,7 +2202,7 @@
{
int rc;
- printk(version);
+ pr_info("%s\n", version);
printed_version = 1;
DMFE_DBUG(0, "init_module() ", debug);
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 296486b..fa5eee9 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -222,8 +222,8 @@
/* there is no phy information, don't even try to build mtable */
if (count == 0) {
if (tulip_debug > 0)
- pr_warning("%s: no phy info, aborting mtable build\n",
- dev->name);
+ pr_warn("%s: no phy info, aborting mtable build\n",
+ dev->name);
return;
}
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 0013642..5350d75 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -125,12 +125,12 @@
#endif
if (tulip_debug > 4)
- printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
- entry, tp->rx_ring[entry].status);
+ netdev_dbg(dev, " In tulip_rx(), entry %d %08x\n",
+ entry, tp->rx_ring[entry].status);
do {
if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
- printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
+ netdev_dbg(dev, " In tulip_poll(), hardware disappeared\n");
break;
}
/* Acknowledge current RX interrupt sources. */
@@ -145,9 +145,9 @@
if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
break;
- if (tulip_debug > 5)
- printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
- dev->name, entry, status);
+ if (tulip_debug > 5)
+ netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+ entry, status);
if (++work_done >= budget)
goto not_done;
@@ -184,9 +184,9 @@
}
} else {
/* There was a fatal error. */
- if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
- dev->name, status);
+ if (tulip_debug > 2)
+ netdev_dbg(dev, "Receive error, Rx status %08x\n",
+ status);
dev->stats.rx_errors++; /* end of a packet.*/
if (pkt_len > 1518 ||
(status & RxDescRunt))
@@ -367,16 +367,16 @@
int received = 0;
if (tulip_debug > 4)
- printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
- entry, tp->rx_ring[entry].status);
+ netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+ entry, tp->rx_ring[entry].status);
/* If we own the next entry, it is a new packet. Send it up. */
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
short pkt_len;
if (tulip_debug > 5)
- printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
- dev->name, entry, status);
+ netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+ entry, status);
if (--rx_work_limit < 0)
break;
@@ -404,16 +404,16 @@
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
- dev_warn(&dev->dev,
- "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
- status);
+ netdev_warn(dev,
+ "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+ status);
dev->stats.rx_length_errors++;
}
} else {
/* There was a fatal error. */
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
- dev->name, status);
+ netdev_dbg(dev, "Receive error, Rx status %08x\n",
+ status);
dev->stats.rx_errors++; /* end of a packet.*/
if (pkt_len > 1518 ||
(status & RxDescRunt))
@@ -573,8 +573,8 @@
#endif /* CONFIG_TULIP_NAPI */
if (tulip_debug > 4)
- printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x\n",
- dev->name, csr5, ioread32(ioaddr + CSR5));
+ netdev_dbg(dev, "interrupt csr5=%#8.8x new csr5=%#8.8x\n",
+ csr5, ioread32(ioaddr + CSR5));
if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
@@ -605,8 +605,8 @@
/* There was an major error, log it. */
#ifndef final_version
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
- dev->name, status);
+ netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+ status);
#endif
dev->stats.tx_errors++;
if (status & 0x4104)
@@ -804,8 +804,8 @@
}
if (tulip_debug > 4)
- printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
- dev->name, ioread32(ioaddr + CSR5));
+ netdev_dbg(dev, "exiting interrupt, csr5=%#04x\n",
+ ioread32(ioaddr + CSR5));
return IRQ_HANDLED;
}
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index a0c770e..4bd1392 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -182,8 +182,8 @@
switch (mleaf->type) {
case 0: /* 21140 non-MII xcvr. */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n",
- dev->name, p[1]);
+ netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n",
+ p[1]);
dev->if_port = p[0];
if (startup)
iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
@@ -204,15 +204,14 @@
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Resetting the transceiver\n",
- dev->name);
+ netdev_dbg(dev, "Resetting the transceiver\n");
for (i = 0; i < rst[0]; i++)
iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n",
- dev->name, medianame[dev->if_port],
- setup[0], setup[1]);
+ netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n",
+ medianame[dev->if_port],
+ setup[0], setup[1]);
if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */
csr13val = setup[0];
csr14val = setup[1];
@@ -239,8 +238,8 @@
if (startup) iowrite32(csr13val, ioaddr + CSR13);
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Setting CSR15 to %08x/%08x\n",
- dev->name, csr15dir, csr15val);
+ netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n",
+ csr15dir, csr15val);
if (mleaf->type == 4)
new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
else
@@ -316,9 +315,9 @@
if (tp->mii_advertise == 0)
tp->mii_advertise = tp->advertising[phy_num];
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Advertising %04x on MII %d\n",
- dev->name, tp->mii_advertise,
- tp->phys[phy_num]);
+ netdev_dbg(dev, " Advertising %04x on MII %d\n",
+ tp->mii_advertise,
+ tp->phys[phy_num]);
tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
}
break;
@@ -335,8 +334,7 @@
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Resetting the transceiver\n",
- dev->name);
+ netdev_dbg(dev, "Resetting the transceiver\n");
for (i = 0; i < rst[0]; i++)
iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
@@ -344,20 +342,21 @@
break;
}
default:
- printk(KERN_DEBUG "%s: Invalid media table selection %d\n",
- dev->name, mleaf->type);
+ netdev_dbg(dev, " Invalid media table selection %d\n",
+ mleaf->type);
new_csr6 = 0x020E0000;
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n",
- dev->name, medianame[dev->if_port],
+ netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n",
+ medianame[dev->if_port],
ioread32(ioaddr + CSR12) & 0xff);
} else if (tp->chip_id == LC82C168) {
if (startup && ! tp->medialock)
dev->if_port = tp->mii_cnt ? 11 : 0;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n",
- dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
+ netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n",
+ ioread32(ioaddr + 0xB8),
+ medianame[dev->if_port]);
if (tp->mii_cnt) {
new_csr6 = 0x810C0000;
iowrite32(0x0001, ioaddr + CSR15);
@@ -388,9 +387,9 @@
} else
new_csr6 = 0x03860000;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n",
- dev->name, medianame[dev->if_port],
- ioread32(ioaddr + CSR12));
+ netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n",
+ medianame[dev->if_port],
+ ioread32(ioaddr + CSR12));
}
tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
@@ -504,8 +503,8 @@
/* Fixup for DLink with miswired PHY. */
if (mii_advert != to_advert) {
- printk(KERN_DEBUG "tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n",
- board_idx, to_advert, phy, mii_advert);
+ pr_debug("tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n",
+ board_idx, to_advert, phy, mii_advert);
tulip_mdio_write (dev, phy, 4, to_advert);
}
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index a63e64b..aa4d9da 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -40,8 +40,8 @@
new_csr6 |= 0x00000200;
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n",
- dev->name, phy_reg, medianame[dev->if_port]);
+ netdev_dbg(dev, "PNIC autonegotiated status %08x, %s\n",
+ phy_reg, medianame[dev->if_port]);
if (tp->csr6 != new_csr6) {
tp->csr6 = new_csr6;
/* Restart Tx */
@@ -58,8 +58,8 @@
int phy_reg = ioread32(ioaddr + 0xB8);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n",
- dev->name, phy_reg, csr5);
+ netdev_dbg(dev, "PNIC link changed state %08x, CSR5 %08x\n",
+ phy_reg, csr5);
if (ioread32(ioaddr + CSR5) & TPLnkFail) {
iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
/* If we use an external MII, then we mustn't use the
@@ -114,8 +114,8 @@
int csr5 = ioread32(ioaddr + CSR5);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n",
- dev->name, phy_reg, medianame[dev->if_port], csr5);
+ netdev_dbg(dev, "PNIC timer PHY status %08x, %s CSR5 %08x\n",
+ phy_reg, medianame[dev->if_port], csr5);
if (phy_reg & 0x04000000) { /* Remote link fault */
iowrite32(0x0201F078, ioaddr + 0xB8);
next_tick = 1*HZ;
@@ -125,11 +125,11 @@
next_tick = 60*HZ;
} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
- dev->name, medianame[dev->if_port],
- csr12,
- ioread32(ioaddr + CSR5),
- ioread32(ioaddr + 0xB8));
+ netdev_dbg(dev, "%s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
+ medianame[dev->if_port],
+ csr12,
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + 0xB8));
next_tick = 3*HZ;
if (tp->medialock) {
} else if (tp->nwayset && (dev->if_port & 1)) {
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 4690c8e..93358ee 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -125,8 +125,8 @@
csr14 |= 0x00001184;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, csr14=%08x\n",
- dev->name, csr14);
+ netdev_dbg(dev, "Restarting PNIC2 autonegotiation, csr14=%08x\n",
+ csr14);
/* tell pnic2_lnk_change we are doing an nway negotiation */
dev->if_port = 0;
@@ -137,8 +137,7 @@
tp->csr6 = ioread32(ioaddr + CSR6);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: On Entry to Nway, csr6=%08x\n",
- dev->name, tp->csr6);
+ netdev_dbg(dev, "On Entry to Nway, csr6=%08x\n", tp->csr6);
/* mask off any bits not to touch
* comment at top of file explains mask value
@@ -271,9 +270,10 @@
iowrite32(1, ioaddr + CSR13);
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n",
- dev->name, tp->csr6,
- ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12));
+ netdev_dbg(dev, "Setting CSR6 %08x/%x CSR12 %08x\n",
+ tp->csr6,
+ ioread32(ioaddr + CSR6),
+ ioread32(ioaddr + CSR12));
/* now the following actually writes out the
* new csr6 values
@@ -324,7 +324,7 @@
/* Link blew? Maybe restart NWay. */
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Ugh! Link blew?\n", dev->name);
+ netdev_dbg(dev, "Ugh! Link blew?\n");
del_timer_sync(&tp->timer);
pnic2_start_nway(dev);
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 36c2725..2017faf 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -28,11 +28,11 @@
unsigned long flags;
if (tulip_debug > 2) {
- printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
- dev->name, medianame[dev->if_port],
- ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
- csr12, ioread32(ioaddr + CSR13),
- ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
+ medianame[dev->if_port],
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
+ csr12, ioread32(ioaddr + CSR13),
+ ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
}
switch (tp->chip_id) {
case DC21140:
@@ -48,9 +48,9 @@
Assume this a generic MII or SYM transceiver. */
next_tick = 60*HZ;
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n",
- dev->name,
- ioread32(ioaddr + CSR6), csr12 & 0xff);
+ netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n",
+ ioread32(ioaddr + CSR6),
+ csr12 & 0xff);
break;
}
mleaf = &tp->mtable->mleaf[tp->cur_index];
@@ -62,8 +62,8 @@
s8 bitnum = p[offset];
if (p[offset+1] & 0x80) {
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n",
- dev->name, csr12);
+ netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n",
+ csr12);
if (mleaf->type == 4) {
if (mleaf->media == 3 && (csr12 & 0x02))
goto select_next_media;
@@ -71,17 +71,16 @@
break;
}
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
- dev->name, csr12, (bitnum >> 1) & 7,
- (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
- (bitnum >= 0));
+ netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
+ csr12, (bitnum >> 1) & 7,
+ (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+ (bitnum >= 0));
/* Check that the specified bit has the proper value. */
if ((bitnum < 0) !=
((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: Link beat detected for %s\n",
- dev->name,
- medianame[mleaf->media & MEDIA_MASK]);
+ netdev_dbg(dev, "Link beat detected for %s\n",
+ medianame[mleaf->media & MEDIA_MASK]);
if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */
goto actually_mii;
netif_carrier_on(dev);
@@ -99,10 +98,9 @@
if (tulip_media_cap[dev->if_port] & MediaIsFD)
goto select_next_media; /* Skip FD entries. */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n",
- dev->name,
- medianame[mleaf->media & MEDIA_MASK],
- medianame[tp->mtable->mleaf[tp->cur_index].media]);
+ netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n",
+ medianame[mleaf->media & MEDIA_MASK],
+ medianame[tp->mtable->mleaf[tp->cur_index].media]);
tulip_select_media(dev, 0);
/* Restart the transmit process. */
tulip_restart_rxtx(tp);
@@ -166,10 +164,9 @@
int next_tick = 60*HZ;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n",
- dev->name,
- tulip_mdio_read(dev, tp->phys[0], 1),
- tulip_mdio_read(dev, tp->phys[0], 5));
+ netdev_dbg(dev, "Comet link status %04x partner capability %04x\n",
+ tulip_mdio_read(dev, tp->phys[0], 1),
+ tulip_mdio_read(dev, tp->phys[0], 5));
/* mod_timer synchronizes us with potential add_timer calls
* from interrupts.
*/
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index ed66a16..9db5289 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -547,11 +547,9 @@
udelay(10);
if (!i)
- printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
- " (CSR5 0x%x CSR6 0x%x)\n",
- pci_name(tp->pdev),
- ioread32(ioaddr + CSR5),
- ioread32(ioaddr + CSR6));
+ netdev_dbg(tp->dev, "tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n",
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
}
}
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 5c01e26..82f8764 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -12,6 +12,7 @@
Please submit bugs to http://bugzilla.kernel.org/ .
*/
+#define pr_fmt(fmt) "tulip: " fmt
#define DRV_NAME "tulip"
#ifdef CONFIG_TULIP_NAPI
@@ -119,8 +120,6 @@
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
-#define PFX DRV_NAME ": "
-
#ifdef TULIP_DEBUG
int tulip_debug = TULIP_DEBUG;
#else
@@ -331,8 +330,7 @@
udelay(100);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
- dev->name, dev->irq);
+ netdev_dbg(dev, "tulip_up(), irq==%d\n", dev->irq);
iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
@@ -499,10 +497,10 @@
iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
if (tulip_debug > 2) {
- printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
- dev->name, ioread32(ioaddr + CSR0),
- ioread32(ioaddr + CSR5),
- ioread32(ioaddr + CSR6));
+ netdev_dbg(dev, "Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+ ioread32(ioaddr + CSR0),
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
}
/* Set the timer to switch to check for link beat and perhaps switch
@@ -843,8 +841,7 @@
tulip_down (dev);
if (tulip_debug > 1)
- dev_printk(KERN_DEBUG, &dev->dev,
- "Shutting down ethercard, status was %02x\n",
+ netdev_dbg(dev, "Shutting down ethercard, status was %02x\n",
ioread32 (ioaddr + CSR5));
free_irq (dev->irq, dev);
@@ -1207,7 +1204,7 @@
u32 csr0;
if (tulip_debug > 3)
- printk(KERN_DEBUG "%s: tulip_mwi_config()\n", pci_name(pdev));
+ netdev_dbg(dev, "tulip_mwi_config()\n");
tp->csr0 = csr0 = 0;
@@ -1269,8 +1266,8 @@
out:
tp->csr0 = csr0;
if (tulip_debug > 2)
- printk(KERN_DEBUG "%s: MWI config cacheline=%d, csr0=%08x\n",
- pci_name(pdev), cache, csr0);
+ netdev_dbg(dev, "MWI config cacheline=%d, csr0=%08x\n",
+ cache, csr0);
}
#endif
@@ -1340,13 +1337,13 @@
*/
if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
- pr_err(PFX "skipping LMC card\n");
+ pr_err("skipping LMC card\n");
return -ENODEV;
} else if (pdev->subsystem_vendor == PCI_VENDOR_ID_SBE &&
(pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_T3E3 ||
pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0 ||
pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)) {
- pr_err(PFX "skipping SBE T3E3 port\n");
+ pr_err("skipping SBE T3E3 port\n");
return -ENODEV;
}
@@ -1362,13 +1359,13 @@
if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
pdev->revision < 0x30) {
- pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
+ pr_info("skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
}
dp = pci_device_to_OF_node(pdev);
if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
- pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
+ pr_info("skipping DM910x expansion card (use dmfe)\n");
return -ENODEV;
}
}
@@ -1415,16 +1412,14 @@
i = pci_enable_device(pdev);
if (i) {
- pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
- board_idx);
+ pr_err("Cannot enable tulip board #%d, aborting\n", board_idx);
return i;
}
/* The chip will fail to enter a low-power state later unless
* first explicitly commanded into D0 */
if (pci_set_power_state(pdev, PCI_D0)) {
- printk (KERN_NOTICE PFX
- "Failed to set power state to D0\n");
+ pr_notice("Failed to set power state to D0\n");
}
irq = pdev->irq;
@@ -1432,13 +1427,13 @@
/* alloc_etherdev ensures aligned and zeroed private structures */
dev = alloc_etherdev (sizeof (*tp));
if (!dev) {
- pr_err(PFX "ether device alloc failed, aborting\n");
+ pr_err("ether device alloc failed, aborting\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
- pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+ pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
pci_name(pdev),
(unsigned long long)pci_resource_len (pdev, 0),
(unsigned long long)pci_resource_start (pdev, 0));
@@ -1483,7 +1478,8 @@
if (sig == 0x09811317) {
tp->flags |= COMET_PM;
tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC;
- printk(KERN_INFO "tulip_init_one: Enabled WOL support for AN983B\n");
+ pr_info("%s: Enabled WOL support for AN983B\n",
+ __func__);
}
}
tp->pdev = pdev;
@@ -1879,7 +1875,7 @@
tulip_set_wolopts(pdev, tp->wolinfo.wolopts);
rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts);
if (rc)
- printk("tulip: pci_enable_wake failed (%d)\n", rc);
+ pr_err("pci_enable_wake failed (%d)\n", rc);
}
pci_set_power_state(pdev, pstate);
@@ -1905,12 +1901,12 @@
return 0;
if ((retval = pci_enable_device(pdev))) {
- pr_err(PFX "pci_enable_device failed in resume\n");
+ pr_err("pci_enable_device failed in resume\n");
return retval;
}
if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
- pr_err(PFX "request_irq failed in resume\n");
+ pr_err("request_irq failed in resume\n");
return retval;
}
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 74217db..9e63f40 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -209,8 +209,7 @@
/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
static const char version[] __devinitconst =
- KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
- DRV_VERSION " (" DRV_RELDATE ")\n";
+ "ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
static int uli526x_debug;
static unsigned char uli526x_media_mode = ULI526X_AUTO;
@@ -283,7 +282,7 @@
ULI526X_DBUG(0, "uli526x_init_one()", 0);
if (!printed_version++)
- printk(version);
+ pr_info("%s\n", version);
/* Init network device */
dev = alloc_etherdev(sizeof(*db));
@@ -292,7 +291,7 @@
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- pr_warning("32-bit PCI DMA not available\n");
+ pr_warn("32-bit PCI DMA not available\n");
err = -ENODEV;
goto err_out_free;
}
@@ -390,9 +389,9 @@
if (err)
goto err_out_res;
- dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
- ent->driver_data >> 16, pci_name(pdev),
- dev->dev_addr, dev->irq);
+ netdev_info(dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+ ent->driver_data >> 16, pci_name(pdev),
+ dev->dev_addr, dev->irq);
pci_set_master(pdev);
@@ -524,7 +523,7 @@
}
}
if(phy_tmp == 32)
- pr_warning("Can not find the phy address!!!");
+ pr_warn("Can not find the phy address!!!\n");
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
@@ -590,7 +589,7 @@
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
- pr_err("big packet = %d\n", (u16)skb->len);
+ netdev_err(dev, "big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -600,7 +599,7 @@
/* No Tx resource check, it never happen nromally */
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
+ netdev_err(dev, "No Tx resource %ld\n", db->tx_packet_cnt);
return NETDEV_TX_BUSY;
}
@@ -667,15 +666,6 @@
/* free allocated rx buffer */
uli526x_free_rxbuffer(db);
-#if 0
- /* show statistic counter */
- printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
- db->tx_fifo_underrun, db->tx_excessive_collision,
- db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
- db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
- db->reset_fatal, db->reset_TXtimeout);
-#endif
-
return 0;
}
@@ -755,7 +745,6 @@
txptr = db->tx_remove_ptr;
while(db->tx_packet_cnt) {
tdes0 = le32_to_cpu(txptr->tdes0);
- /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
if (tdes0 & 0x80000000)
break;
@@ -765,7 +754,6 @@
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
- /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
dev->stats.collisions += (tdes0 >> 3) & 0xf;
dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
@@ -838,7 +826,6 @@
/* error summary bit check */
if (rdes0 & 0x8000) {
/* This is a error packet */
- //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
dev->stats.rx_errors++;
if (rdes0 & 1)
dev->stats.rx_fifo_errors++;
@@ -945,12 +932,12 @@
ecmd->transceiver = XCVR_EXTERNAL;
- ecmd->speed = 10;
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
ecmd->duplex = DUPLEX_HALF;
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
- ecmd->speed = 100;
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
@@ -958,7 +945,7 @@
}
if(db->link_failed)
{
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
@@ -1024,7 +1011,6 @@
struct net_device *dev = (struct net_device *) data;
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long flags;
- u8 TmpSpeed=10;
//ULI526X_DBUG(0, "uli526x_timer()", 0);
spin_lock_irqsave(&db->lock, flags);
@@ -1047,8 +1033,7 @@
if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) {
db->reset_TXtimeout++;
db->wait_reset = 1;
- printk( "%s: Tx timeout - resetting\n",
- dev->name);
+ netdev_err(dev, " Tx timeout - resetting\n");
}
}
@@ -1070,7 +1055,7 @@
/* Link Failed */
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
- pr_info("%s NIC Link is Down\n",dev->name);
+ netdev_info(dev, "NIC Link is Down\n");
db->link_failed = 1;
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1096,18 +1081,13 @@
if(db->link_failed==0)
{
- if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
- {
- TmpSpeed = 100;
- }
- if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
- {
- pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
- }
- else
- {
- pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
- }
+ netdev_info(dev, "NIC Link is Up %d Mbps %s duplex\n",
+ (db->op_mode == ULI526X_100MHF ||
+ db->op_mode == ULI526X_100MFD)
+ ? 100 : 10,
+ (db->op_mode == ULI526X_10MFD ||
+ db->op_mode == ULI526X_100MFD)
+ ? "Full" : "Half");
netif_carrier_on(dev);
}
/* SHOW_MEDIA_TYPE(db->op_mode); */
@@ -1116,7 +1096,7 @@
{
if(db->init==1)
{
- pr_info("%s NIC Link is Down\n",dev->name);
+ netdev_info(dev, "NIC Link is Down\n");
netif_carrier_off(dev);
}
}
@@ -1242,7 +1222,7 @@
err = pci_set_power_state(pdev, PCI_D0);
if (err) {
- dev_warn(&dev->dev, "Could not put device into D0\n");
+ netdev_warn(dev, "Could not put device into D0\n");
return err;
}
@@ -1443,7 +1423,7 @@
update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
- pr_err("No Tx resource - Send_filter_frame!\n");
+ netdev_err(dev, "No Tx resource - Send_filter_frame!\n");
}
@@ -1540,7 +1520,6 @@
else
phy_mode = 0x1000;
- /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = ULI526X_10MHF; break;
case 0x2000: db->op_mode = ULI526X_10MFD; break;
@@ -1829,7 +1808,7 @@
static int __init uli526x_init_module(void)
{
- printk(version);
+ pr_info("%s\n", version);
printed_version = 1;
ULI526X_DBUG(0, "init_module() ", debug);
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index f0b2310..862eadf 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -44,6 +44,8 @@
* Wake-On-LAN
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "winbond-840"
#define DRV_VERSION "1.01-e"
#define DRV_RELDATE "Sep-11-2006"
@@ -139,7 +141,7 @@
/* These identify the driver base version and may not be removed. */
static const char version[] __initconst =
- KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
+ "v" DRV_VERSION " (2.4 port) "
DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
" http://www.scyld.com/network/drivers.html\n";
@@ -375,8 +377,8 @@
irq = pdev->irq;
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- pr_warning("Winbond-840: Device %s disabled due to DMA limitations\n",
- pci_name(pdev));
+ pr_warn("Device %s disabled due to DMA limitations\n",
+ pci_name(pdev));
return -EIO;
}
dev = alloc_etherdev(sizeof(*np));
@@ -643,8 +645,7 @@
goto out_err;
if (debug > 1)
- printk(KERN_DEBUG "%s: w89c840_open() irq %d\n",
- dev->name, dev->irq);
+ netdev_dbg(dev, "w89c840_open() irq %d\n", dev->irq);
if((i=alloc_ringdesc(dev)))
goto out_err;
@@ -656,7 +657,7 @@
netif_start_queue(dev);
if (debug > 2)
- printk(KERN_DEBUG "%s: Done netdev_open()\n", dev->name);
+ netdev_dbg(dev, "Done netdev_open()\n");
/* Set the timer to check for link beat. */
init_timer(&np->timer);
@@ -785,9 +786,9 @@
void __iomem *ioaddr = np->base_addr;
if (debug > 2)
- printk(KERN_DEBUG "%s: Media selection timer tick, status %08x config %08x\n",
- dev->name, ioread32(ioaddr + IntrStatus),
- ioread32(ioaddr + NetworkConfig));
+ netdev_dbg(dev, "Media selection timer tick, status %08x config %08x\n",
+ ioread32(ioaddr + IntrStatus),
+ ioread32(ioaddr + NetworkConfig));
spin_lock_irq(&np->lock);
update_csr6(dev, update_link(dev));
spin_unlock_irq(&np->lock);
@@ -1054,8 +1055,8 @@
spin_unlock_irq(&np->lock);
if (debug > 4) {
- printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d\n",
- dev->name, np->cur_tx, entry);
+ netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+ np->cur_tx, entry);
}
return NETDEV_TX_OK;
}
@@ -1072,8 +1073,8 @@
if (tx_status & 0x8000) { /* There was an error, log it. */
#ifndef final_version
if (debug > 1)
- printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
- dev->name, tx_status);
+ netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+ tx_status);
#endif
np->stats.tx_errors++;
if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
@@ -1085,8 +1086,8 @@
} else {
#ifndef final_version
if (debug > 3)
- printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %08x\n",
- dev->name, entry, tx_status);
+ netdev_dbg(dev, "Transmit slot %d ok, Tx status %08x\n",
+ entry, tx_status);
#endif
np->stats.tx_bytes += np->tx_skbuff[entry]->len;
np->stats.collisions += (tx_status >> 3) & 15;
@@ -1129,8 +1130,7 @@
iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
if (debug > 4)
- printk(KERN_DEBUG "%s: Interrupt, status %04x\n",
- dev->name, intr_status);
+ netdev_dbg(dev, "Interrupt, status %04x\n", intr_status);
if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
break;
@@ -1171,8 +1171,8 @@
} while (1);
if (debug > 3)
- printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x\n",
- dev->name, ioread32(ioaddr + IntrStatus));
+ netdev_dbg(dev, "exiting interrupt, status=%#4.4x\n",
+ ioread32(ioaddr + IntrStatus));
return IRQ_RETVAL(handled);
}
@@ -1185,8 +1185,8 @@
int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
if (debug > 4) {
- printk(KERN_DEBUG " In netdev_rx(), entry %d status %04x\n",
- entry, np->rx_ring[entry].status);
+ netdev_dbg(dev, " In netdev_rx(), entry %d status %04x\n",
+ entry, np->rx_ring[entry].status);
}
/* If EOP is set on the next entry, it's a new packet. Send it up. */
@@ -1195,8 +1195,8 @@
s32 status = desc->status;
if (debug > 4)
- printk(KERN_DEBUG " netdev_rx() status was %08x\n",
- status);
+ netdev_dbg(dev, " netdev_rx() status was %08x\n",
+ status);
if (status < 0)
break;
if ((status & 0x38008300) != 0x0300) {
@@ -1211,8 +1211,8 @@
} else if (status & 0x8000) {
/* There was a fatal error. */
if (debug > 2)
- printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
- dev->name, status);
+ netdev_dbg(dev, "Receive error, Rx status %08x\n",
+ status);
np->stats.rx_errors++; /* end of a packet.*/
if (status & 0x0890) np->stats.rx_length_errors++;
if (status & 0x004C) np->stats.rx_frame_errors++;
@@ -1225,8 +1225,8 @@
#ifndef final_version
if (debug > 4)
- printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d status %x\n",
- pkt_len, status);
+ netdev_dbg(dev, " netdev_rx() normal Rx pkt length %d status %x\n",
+ pkt_len, status);
#endif
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
@@ -1251,10 +1251,10 @@
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
if (debug > 5)
- printk(KERN_DEBUG " Rx data %pM %pM %02x%02x %pI4\n",
- &skb->data[0], &skb->data[6],
- skb->data[12], skb->data[13],
- &skb->data[14]);
+ netdev_dbg(dev, " Rx data %pM %pM %02x%02x %pI4\n",
+ &skb->data[0], &skb->data[6],
+ skb->data[12], skb->data[13],
+ &skb->data[14]);
#endif
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
@@ -1292,8 +1292,7 @@
void __iomem *ioaddr = np->base_addr;
if (debug > 2)
- printk(KERN_DEBUG "%s: Abnormal event, %08x\n",
- dev->name, intr_status);
+ netdev_dbg(dev, "Abnormal event, %08x\n", intr_status);
if (intr_status == 0xffffffff)
return;
spin_lock(&np->lock);
@@ -1313,8 +1312,7 @@
new = 127; /* load full packet before starting */
new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
#endif
- printk(KERN_DEBUG "%s: Tx underflow, new csr6 %08x\n",
- dev->name, new);
+ netdev_dbg(dev, "Tx underflow, new csr6 %08x\n", new);
update_csr6(dev, new);
}
if (intr_status & RxDied) { /* Missed a Rx frame. */
@@ -1487,13 +1485,12 @@
netif_stop_queue(dev);
if (debug > 1) {
- printk(KERN_DEBUG "%s: Shutting down ethercard, status was %08x Config %08x\n",
- dev->name, ioread32(ioaddr + IntrStatus),
- ioread32(ioaddr + NetworkConfig));
- printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d\n",
- dev->name,
- np->cur_tx, np->dirty_tx,
- np->cur_rx, np->dirty_rx);
+ netdev_dbg(dev, "Shutting down ethercard, status was %08x Config %08x\n",
+ ioread32(ioaddr + IntrStatus),
+ ioread32(ioaddr + NetworkConfig));
+ netdev_dbg(dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n",
+ np->cur_tx, np->dirty_tx,
+ np->cur_rx, np->dirty_rx);
}
/* Stop the chip's Tx and Rx processes. */
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 5a73752..988b8eb 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -37,15 +37,6 @@
#include <asm/irq.h>
#endif
-#ifdef DEBUG
-#define enter(x) printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__)
-#define leave(x) printk("Leave: %s, %s line %i\n",x,__FILE__,__LINE__)
-#else
-#define enter(x) do {} while (0)
-#define leave(x) do {} while (0)
-#endif
-
-
MODULE_DESCRIPTION("Xircom Cardbus ethernet driver");
MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>");
MODULE_LICENSE("GPL");
@@ -161,7 +152,7 @@
};
-#ifdef DEBUG
+#if defined DEBUG && DEBUG > 1
static void print_binary(unsigned int number)
{
int i,i2;
@@ -176,7 +167,7 @@
if ((i&3)==0)
buffer[i2++]=' ';
}
- printk("%s\n",buffer);
+ pr_debug("%s\n",buffer);
}
#endif
@@ -205,7 +196,6 @@
struct xircom_private *private;
unsigned long flags;
unsigned short tmp16;
- enter("xircom_probe");
/* First do the PCI initialisation */
@@ -272,8 +262,8 @@
goto reg_fail;
}
- dev_info(&dev->dev, "Xircom cardbus revision %i at irq %i\n",
- pdev->revision, pdev->irq);
+ netdev_info(dev, "Xircom cardbus revision %i at irq %i\n",
+ pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
@@ -285,7 +275,6 @@
trigger_receive(private);
- leave("xircom_probe");
return 0;
reg_fail:
@@ -310,7 +299,6 @@
struct net_device *dev = pci_get_drvdata(pdev);
struct xircom_private *card = netdev_priv(dev);
- enter("xircom_remove");
pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle);
pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle);
@@ -318,7 +306,6 @@
unregister_netdev(dev);
free_netdev(dev);
pci_set_drvdata(pdev, NULL);
- leave("xircom_remove");
}
static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
@@ -328,17 +315,15 @@
unsigned int status;
int i;
- enter("xircom_interrupt\n");
-
spin_lock(&card->lock);
status = inl(card->io_port+CSR5);
-#ifdef DEBUG
+#if defined DEBUG && DEBUG > 1
print_binary(status);
- printk("tx status 0x%08x 0x%08x\n",
- card->tx_buffer[0], card->tx_buffer[4]);
- printk("rx status 0x%08x 0x%08x\n",
- card->rx_buffer[0], card->rx_buffer[4]);
+ pr_debug("tx status 0x%08x 0x%08x\n",
+ card->tx_buffer[0], card->tx_buffer[4]);
+ pr_debug("rx status 0x%08x 0x%08x\n",
+ card->rx_buffer[0], card->rx_buffer[4]);
#endif
/* Handle shared irq and hotplug */
if (status == 0 || status == 0xffffffff) {
@@ -348,9 +333,9 @@
if (link_status_changed(card)) {
int newlink;
- printk(KERN_DEBUG "xircom_cb: Link status has changed\n");
+ netdev_dbg(dev, "Link status has changed\n");
newlink = link_status(card);
- dev_info(&dev->dev, "Link is %i mbit\n", newlink);
+ netdev_info(dev, "Link is %d mbit\n", newlink);
if (newlink)
netif_carrier_on(dev);
else
@@ -369,9 +354,7 @@
for (i=0;i<NUMDESCRIPTORS;i++)
investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
-
spin_unlock(&card->lock);
- leave("xircom_interrupt");
return IRQ_HANDLED;
}
@@ -382,7 +365,6 @@
unsigned long flags;
int nextdescriptor;
int desc;
- enter("xircom_start_xmit");
card = netdev_priv(dev);
spin_lock_irqsave(&card->lock,flags);
@@ -424,13 +406,10 @@
netif_stop_queue(dev);
}
card->transmit_used = nextdescriptor;
- leave("xircom-start_xmit - sent");
spin_unlock_irqrestore(&card->lock,flags);
return NETDEV_TX_OK;
}
-
-
/* Uh oh... no free descriptor... drop the packet */
netif_stop_queue(dev);
spin_unlock_irqrestore(&card->lock,flags);
@@ -446,18 +425,16 @@
{
struct xircom_private *xp = netdev_priv(dev);
int retval;
- enter("xircom_open");
- pr_info("xircom cardbus adaptor found, registering as %s, using irq %i\n",
- dev->name, dev->irq);
+
+ netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n",
+ dev->irq);
retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
- if (retval) {
- leave("xircom_open - No IRQ");
+ if (retval)
return retval;
- }
xircom_up(xp);
xp->open = 1;
- leave("xircom_open");
+
return 0;
}
@@ -466,7 +443,6 @@
struct xircom_private *card;
unsigned long flags;
- enter("xircom_close");
card = netdev_priv(dev);
netif_stop_queue(dev); /* we don't want new packets */
@@ -486,8 +462,6 @@
card->open = 0;
free_irq(dev->irq,dev);
- leave("xircom_close");
-
return 0;
}
@@ -507,8 +481,6 @@
{
unsigned int val;
unsigned long flags;
- enter("initialize_card");
-
spin_lock_irqsave(&card->lock, flags);
@@ -534,8 +506,6 @@
deactivate_transmitter(card);
spin_unlock_irqrestore(&card->lock, flags);
-
- leave("initialize_card");
}
/*
@@ -547,12 +517,9 @@
static void trigger_transmit(struct xircom_private *card)
{
unsigned int val;
- enter("trigger_transmit");
val = 0;
outl(val, card->io_port + CSR1);
-
- leave("trigger_transmit");
}
/*
@@ -565,12 +532,9 @@
static void trigger_receive(struct xircom_private *card)
{
unsigned int val;
- enter("trigger_receive");
val = 0;
outl(val, card->io_port + CSR2);
-
- leave("trigger_receive");
}
/*
@@ -581,8 +545,6 @@
{
u32 address;
int i;
- enter("setup_descriptors");
-
BUG_ON(card->rx_buffer == NULL);
BUG_ON(card->tx_buffer == NULL);
@@ -636,8 +598,6 @@
/* wite the transmit descriptor ring to the card */
address = card->tx_dma_handle;
outl(address, card->io_port + CSR4); /* xmit descr list address */
-
- leave("setup_descriptors");
}
/*
@@ -647,13 +607,10 @@
static void remove_descriptors(struct xircom_private *card)
{
unsigned int val;
- enter("remove_descriptors");
val = 0;
outl(val, card->io_port + CSR3); /* Receive descriptor address */
outl(val, card->io_port + CSR4); /* Send descriptor address */
-
- leave("remove_descriptors");
}
/*
@@ -665,21 +622,17 @@
static int link_status_changed(struct xircom_private *card)
{
unsigned int val;
- enter("link_status_changed");
val = inl(card->io_port + CSR5); /* Status register */
- if ((val & (1 << 27)) == 0) { /* no change */
- leave("link_status_changed - nochange");
+ if ((val & (1 << 27)) == 0) /* no change */
return 0;
- }
/* clear the event by writing a 1 to the bit in the
status register. */
val = (1 << 27);
outl(val, card->io_port + CSR5);
- leave("link_status_changed - changed");
return 1;
}
@@ -691,16 +644,12 @@
static int transmit_active(struct xircom_private *card)
{
unsigned int val;
- enter("transmit_active");
val = inl(card->io_port + CSR5); /* Status register */
- if ((val & (7 << 20)) == 0) { /* transmitter disabled */
- leave("transmit_active - inactive");
+ if ((val & (7 << 20)) == 0) /* transmitter disabled */
return 0;
- }
- leave("transmit_active - active");
return 1;
}
@@ -711,17 +660,12 @@
static int receive_active(struct xircom_private *card)
{
unsigned int val;
- enter("receive_active");
-
val = inl(card->io_port + CSR5); /* Status register */
- if ((val & (7 << 17)) == 0) { /* receiver disabled */
- leave("receive_active - inactive");
+ if ((val & (7 << 17)) == 0) /* receiver disabled */
return 0;
- }
- leave("receive_active - active");
return 1;
}
@@ -739,8 +683,6 @@
{
unsigned int val;
int counter;
- enter("activate_receiver");
-
val = inl(card->io_port + CSR6); /* Operation mode */
@@ -761,7 +703,7 @@
udelay(50);
counter--;
if (counter <= 0)
- pr_err("Receiver failed to deactivate\n");
+ netdev_err(card->dev, "Receiver failed to deactivate\n");
}
/* enable the receiver */
@@ -778,10 +720,9 @@
udelay(50);
counter--;
if (counter <= 0)
- pr_err("Receiver failed to re-activate\n");
+ netdev_err(card->dev,
+ "Receiver failed to re-activate\n");
}
-
- leave("activate_receiver");
}
/*
@@ -795,7 +736,6 @@
{
unsigned int val;
int counter;
- enter("deactivate_receiver");
val = inl(card->io_port + CSR6); /* Operation mode */
val = val & ~2; /* disable the receiver */
@@ -809,11 +749,8 @@
udelay(50);
counter--;
if (counter <= 0)
- pr_err("Receiver failed to deactivate\n");
+ netdev_err(card->dev, "Receiver failed to deactivate\n");
}
-
-
- leave("deactivate_receiver");
}
@@ -831,8 +768,6 @@
{
unsigned int val;
int counter;
- enter("activate_transmitter");
-
val = inl(card->io_port + CSR6); /* Operation mode */
@@ -852,7 +787,8 @@
udelay(50);
counter--;
if (counter <= 0)
- pr_err("Transmitter failed to deactivate\n");
+ netdev_err(card->dev,
+ "Transmitter failed to deactivate\n");
}
/* enable the transmitter */
@@ -869,10 +805,9 @@
udelay(50);
counter--;
if (counter <= 0)
- pr_err("Transmitter failed to re-activate\n");
+ netdev_err(card->dev,
+ "Transmitter failed to re-activate\n");
}
-
- leave("activate_transmitter");
}
/*
@@ -886,7 +821,6 @@
{
unsigned int val;
int counter;
- enter("deactivate_transmitter");
val = inl(card->io_port + CSR6); /* Operation mode */
val = val & ~2; /* disable the transmitter */
@@ -900,11 +834,9 @@
udelay(50);
counter--;
if (counter <= 0)
- pr_err("Transmitter failed to deactivate\n");
+ netdev_err(card->dev,
+ "Transmitter failed to deactivate\n");
}
-
-
- leave("deactivate_transmitter");
}
@@ -916,13 +848,10 @@
static void enable_transmit_interrupt(struct xircom_private *card)
{
unsigned int val;
- enter("enable_transmit_interrupt");
val = inl(card->io_port + CSR7); /* Interrupt enable register */
val |= 1; /* enable the transmit interrupt */
outl(val, card->io_port + CSR7);
-
- leave("enable_transmit_interrupt");
}
@@ -934,13 +863,10 @@
static void enable_receive_interrupt(struct xircom_private *card)
{
unsigned int val;
- enter("enable_receive_interrupt");
val = inl(card->io_port + CSR7); /* Interrupt enable register */
val = val | (1 << 6); /* enable the receive interrupt */
outl(val, card->io_port + CSR7);
-
- leave("enable_receive_interrupt");
}
/*
@@ -951,13 +877,10 @@
static void enable_link_interrupt(struct xircom_private *card)
{
unsigned int val;
- enter("enable_link_interrupt");
val = inl(card->io_port + CSR7); /* Interrupt enable register */
val = val | (1 << 27); /* enable the link status chage interrupt */
outl(val, card->io_port + CSR7);
-
- leave("enable_link_interrupt");
}
@@ -970,12 +893,9 @@
static void disable_all_interrupts(struct xircom_private *card)
{
unsigned int val;
- enter("enable_all_interrupts");
val = 0; /* disable all interrupts */
outl(val, card->io_port + CSR7);
-
- leave("disable_all_interrupts");
}
/*
@@ -986,7 +906,6 @@
static void enable_common_interrupts(struct xircom_private *card)
{
unsigned int val;
- enter("enable_link_interrupt");
val = inl(card->io_port + CSR7); /* Interrupt enable register */
val |= (1<<16); /* Normal Interrupt Summary */
@@ -998,8 +917,6 @@
val |= (1<<2); /* Transmit Buffer Unavailable */
val |= (1<<1); /* Transmit Process Stopped */
outl(val, card->io_port + CSR7);
-
- leave("enable_link_interrupt");
}
/*
@@ -1010,13 +927,11 @@
static int enable_promisc(struct xircom_private *card)
{
unsigned int val;
- enter("enable_promisc");
val = inl(card->io_port + CSR6);
val = val | (1 << 6);
outl(val, card->io_port + CSR6);
- leave("enable_promisc");
return 1;
}
@@ -1031,7 +946,6 @@
static int link_status(struct xircom_private *card)
{
unsigned int val;
- enter("link_status");
val = inb(card->io_port + CSR12);
@@ -1042,7 +956,6 @@
/* If we get here -> no link at all */
- leave("link_status");
return 0;
}
@@ -1061,8 +974,6 @@
unsigned long flags;
int i;
- enter("read_mac_address");
-
spin_lock_irqsave(&card->lock, flags);
outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */
@@ -1090,7 +1001,6 @@
}
spin_unlock_irqrestore(&card->lock, flags);
pr_debug(" %pM\n", card->dev->dev_addr);
- leave("read_mac_address");
}
@@ -1103,8 +1013,6 @@
{
unsigned long flags;
- enter("transceiver_voodoo");
-
/* disable all powermanagement */
pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
@@ -1122,7 +1030,6 @@
spin_unlock_irqrestore(&card->lock, flags);
netif_start_queue(card->dev);
- leave("transceiver_voodoo");
}
@@ -1131,8 +1038,6 @@
unsigned long flags;
int i;
- enter("xircom_up");
-
/* disable all powermanagement */
pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
@@ -1156,87 +1061,84 @@
trigger_receive(card);
trigger_transmit(card);
netif_start_queue(card->dev);
- leave("xircom_up");
}
/* Bufferoffset is in BYTES */
-static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset)
+static void
+investigate_read_descriptor(struct net_device *dev, struct xircom_private *card,
+ int descnr, unsigned int bufferoffset)
{
- int status;
+ int status;
- enter("investigate_read_descriptor");
- status = le32_to_cpu(card->rx_buffer[4*descnr]);
+ status = le32_to_cpu(card->rx_buffer[4*descnr]);
- if ((status > 0)) { /* packet received */
+ if (status > 0) { /* packet received */
- /* TODO: discard error packets */
+ /* TODO: discard error packets */
- short pkt_len = ((status >> 16) & 0x7ff) - 4; /* minus 4, we don't want the CRC */
- struct sk_buff *skb;
+ short pkt_len = ((status >> 16) & 0x7ff) - 4;
+ /* minus 4, we don't want the CRC */
+ struct sk_buff *skb;
- if (pkt_len > 1518) {
- pr_err("Packet length %i is bogus\n", pkt_len);
- pkt_len = 1518;
- }
-
- skb = dev_alloc_skb(pkt_len + 2);
- if (skb == NULL) {
- dev->stats.rx_dropped++;
- goto out;
- }
- skb_reserve(skb, 2);
- skb_copy_to_linear_data(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len);
- skb_put(skb, pkt_len);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
-
- out:
- /* give the buffer back to the card */
- card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000);
- trigger_receive(card);
+ if (pkt_len > 1518) {
+ netdev_err(dev, "Packet length %i is bogus\n", pkt_len);
+ pkt_len = 1518;
}
- leave("investigate_read_descriptor");
+ skb = dev_alloc_skb(pkt_len + 2);
+ if (skb == NULL) {
+ dev->stats.rx_dropped++;
+ goto out;
+ }
+ skb_reserve(skb, 2);
+ skb_copy_to_linear_data(skb,
+ &card->rx_buffer[bufferoffset / 4],
+ pkt_len);
+ skb_put(skb, pkt_len);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+out:
+ /* give the buffer back to the card */
+ card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000);
+ trigger_receive(card);
+ }
}
/* Bufferoffset is in BYTES */
-static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset)
+static void
+investigate_write_descriptor(struct net_device *dev,
+ struct xircom_private *card,
+ int descnr, unsigned int bufferoffset)
{
- int status;
+ int status;
- enter("investigate_write_descriptor");
-
- status = le32_to_cpu(card->tx_buffer[4*descnr]);
+ status = le32_to_cpu(card->tx_buffer[4*descnr]);
#if 0
- if (status & 0x8000) { /* Major error */
- pr_err("Major transmit error status %x\n", status);
- card->tx_buffer[4*descnr] = 0;
- netif_wake_queue (dev);
- }
+ if (status & 0x8000) { /* Major error */
+ pr_err("Major transmit error status %x\n", status);
+ card->tx_buffer[4*descnr] = 0;
+ netif_wake_queue (dev);
+ }
#endif
- if (status > 0) { /* bit 31 is 0 when done */
- if (card->tx_skb[descnr]!=NULL) {
- dev->stats.tx_bytes += card->tx_skb[descnr]->len;
- dev_kfree_skb_irq(card->tx_skb[descnr]);
- }
- card->tx_skb[descnr] = NULL;
- /* Bit 8 in the status field is 1 if there was a collision */
- if (status&(1<<8))
- dev->stats.collisions++;
- card->tx_buffer[4*descnr] = 0; /* descriptor is free again */
- netif_wake_queue (dev);
- dev->stats.tx_packets++;
+ if (status > 0) { /* bit 31 is 0 when done */
+ if (card->tx_skb[descnr]!=NULL) {
+ dev->stats.tx_bytes += card->tx_skb[descnr]->len;
+ dev_kfree_skb_irq(card->tx_skb[descnr]);
}
-
- leave("investigate_write_descriptor");
-
+ card->tx_skb[descnr] = NULL;
+ /* Bit 8 in the status field is 1 if there was a collision */
+ if (status & (1 << 8))
+ dev->stats.collisions++;
+ card->tx_buffer[4*descnr] = 0; /* descriptor is free again */
+ netif_wake_queue (dev);
+ dev->stats.tx_packets++;
+ }
}
-
static int __init xircom_init(void)
{
return pci_register_driver(&xircom_ops);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index f5e9ac0..74e9405 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -123,6 +123,9 @@
gid_t group;
struct net_device *dev;
+ u32 set_features;
+#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \
+ NETIF_F_TSO6|NETIF_F_UFO)
struct fasync_struct *fasync;
struct tap_filter txflt;
@@ -451,12 +454,20 @@
return 0;
}
+static u32 tun_net_fix_features(struct net_device *dev, u32 features)
+{
+ struct tun_struct *tun = netdev_priv(dev);
+
+ return (features & tun->set_features) | (features & ~TUN_USER_FEATURES);
+}
+
static const struct net_device_ops tun_netdev_ops = {
.ndo_uninit = tun_net_uninit,
.ndo_open = tun_net_open,
.ndo_stop = tun_net_close,
.ndo_start_xmit = tun_net_xmit,
.ndo_change_mtu = tun_net_change_mtu,
+ .ndo_fix_features = tun_net_fix_features,
};
static const struct net_device_ops tap_netdev_ops = {
@@ -465,6 +476,7 @@
.ndo_stop = tun_net_close,
.ndo_start_xmit = tun_net_xmit,
.ndo_change_mtu = tun_net_change_mtu,
+ .ndo_fix_features = tun_net_fix_features,
.ndo_set_multicast_list = tun_net_mclist,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
@@ -628,8 +640,7 @@
kfree_skb(skb);
return -EINVAL;
}
- } else if (tun->flags & TUN_NOCHECKSUM)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
@@ -1088,11 +1099,9 @@
tun_net_init(dev);
- if (strchr(dev->name, '%')) {
- err = dev_alloc_name(dev, dev->name);
- if (err < 0)
- goto err_free_sk;
- }
+ dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST |
+ TUN_USER_FEATURES;
+ dev->features = dev->hw_features;
err = register_netdevice(tun->dev);
if (err < 0)
@@ -1158,18 +1167,12 @@
/* This is like a cut-down ethtool ops, except done via tun fd so no
* privs required. */
-static int set_offload(struct net_device *dev, unsigned long arg)
+static int set_offload(struct tun_struct *tun, unsigned long arg)
{
- u32 old_features, features;
-
- old_features = dev->features;
- /* Unset features, set them as we chew on the arg. */
- features = (old_features & ~(NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST
- |NETIF_F_TSO_ECN|NETIF_F_TSO|NETIF_F_TSO6
- |NETIF_F_UFO));
+ u32 features = 0;
if (arg & TUN_F_CSUM) {
- features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
+ features |= NETIF_F_HW_CSUM;
arg &= ~TUN_F_CSUM;
if (arg & (TUN_F_TSO4|TUN_F_TSO6)) {
@@ -1195,9 +1198,8 @@
if (arg)
return -EINVAL;
- dev->features = features;
- if (old_features != dev->features)
- netdev_features_change(dev);
+ tun->set_features = features;
+ netdev_update_features(tun->dev);
return 0;
}
@@ -1262,12 +1264,9 @@
case TUNSETNOCSUM:
/* Disable/Enable checksum */
- if (arg)
- tun->flags |= TUN_NOCHECKSUM;
- else
- tun->flags &= ~TUN_NOCHECKSUM;
- tun_debug(KERN_INFO, tun, "checksum %s\n",
+ /* [unimplemented] */
+ tun_debug(KERN_INFO, tun, "ignored: set checksum %s\n",
arg ? "disabled" : "enabled");
break;
@@ -1316,7 +1315,7 @@
break;
#endif
case TUNSETOFFLOAD:
- ret = set_offload(tun->dev, arg);
+ ret = set_offload(tun, arg);
break;
case TUNSETTXFILTER:
@@ -1548,7 +1547,7 @@
{
cmd->supported = 0;
cmd->advertising = 0;
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_TP;
cmd->phy_address = 0;
@@ -1595,30 +1594,12 @@
#endif
}
-static u32 tun_get_rx_csum(struct net_device *dev)
-{
- struct tun_struct *tun = netdev_priv(dev);
- return (tun->flags & TUN_NOCHECKSUM) == 0;
-}
-
-static int tun_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct tun_struct *tun = netdev_priv(dev);
- if (data)
- tun->flags &= ~TUN_NOCHECKSUM;
- else
- tun->flags |= TUN_NOCHECKSUM;
- return 0;
-}
-
static const struct ethtool_ops tun_ethtool_ops = {
.get_settings = tun_get_settings,
.get_drvinfo = tun_get_drvinfo,
.get_msglevel = tun_get_msglevel,
.set_msglevel = tun_set_msglevel,
.get_link = ethtool_op_get_link,
- .get_rx_csum = tun_get_rx_csum,
- .set_rx_csum = tun_set_rx_csum
};
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 82653cb..3de4283 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -1050,7 +1050,7 @@
/* need to get stats to make these link speed/duplex valid */
typhoon_do_get_stats(tp);
- cmd->speed = tp->speed;
+ ethtool_cmd_speed_set(cmd, tp->speed);
cmd->duplex = tp->duplex;
cmd->phy_address = 0;
cmd->transceiver = XCVR_INTERNAL;
@@ -1068,25 +1068,26 @@
typhoon_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct typhoon *tp = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
struct cmd_desc xp_cmd;
__le16 xcvr;
int err;
err = -EINVAL;
- if(cmd->autoneg == AUTONEG_ENABLE) {
+ if (cmd->autoneg == AUTONEG_ENABLE) {
xcvr = TYPHOON_XCVR_AUTONEG;
} else {
- if(cmd->duplex == DUPLEX_HALF) {
- if(cmd->speed == SPEED_10)
+ if (cmd->duplex == DUPLEX_HALF) {
+ if (speed == SPEED_10)
xcvr = TYPHOON_XCVR_10HALF;
- else if(cmd->speed == SPEED_100)
+ else if (speed == SPEED_100)
xcvr = TYPHOON_XCVR_100HALF;
else
goto out;
- } else if(cmd->duplex == DUPLEX_FULL) {
- if(cmd->speed == SPEED_10)
+ } else if (cmd->duplex == DUPLEX_FULL) {
+ if (speed == SPEED_10)
xcvr = TYPHOON_XCVR_10FULL;
- else if(cmd->speed == SPEED_100)
+ else if (speed == SPEED_100)
xcvr = TYPHOON_XCVR_100FULL;
else
goto out;
@@ -1105,7 +1106,7 @@
tp->speed = 0xff; /* invalid */
tp->duplex = 0xff; /* invalid */
} else {
- tp->speed = cmd->speed;
+ tp->speed = speed;
tp->duplex = cmd->duplex;
}
@@ -1144,28 +1145,6 @@
return 0;
}
-static u32
-typhoon_get_rx_csum(struct net_device *dev)
-{
- /* For now, we don't allow turning off RX checksums.
- */
- return 1;
-}
-
-static int
-typhoon_set_flags(struct net_device *dev, u32 data)
-{
- /* There's no way to turn off the RX VLAN offloading and stripping
- * on the current 3XP firmware -- it does not respect the offload
- * settings -- so we only allow the user to toggle the TX processing.
- */
- if (!(data & ETH_FLAG_RXVLAN))
- return -EINVAL;
-
- return ethtool_op_set_flags(dev, data,
- ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
-}
-
static void
typhoon_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
@@ -1187,13 +1166,7 @@
.get_wol = typhoon_get_wol,
.set_wol = typhoon_set_wol,
.get_link = ethtool_op_get_link,
- .get_rx_csum = typhoon_get_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = ethtool_op_set_tso,
.get_ringparam = typhoon_get_ringparam,
- .set_flags = typhoon_set_flags,
- .get_flags = ethtool_op_get_flags,
};
static int
@@ -2482,10 +2455,15 @@
/* We can handle scatter gather, up to 16 entries, and
* we can do IP checksumming (only version 4, doh...)
+ *
+ * There's no way to turn off the RX VLAN offloading and stripping
+ * on the current 3XP firmware -- it does not respect the offload
+ * settings -- so we only allow the user to toggle the TX processing.
*/
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->features |= NETIF_F_TSO;
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+ NETIF_F_HW_VLAN_TX;
+ dev->features = dev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_RXCSUM;
if(register_netdev(dev) < 0) {
err_msg = "unable to register netdev";
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48..537fbc0a 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -410,7 +410,6 @@
.set_ringparam = uec_set_ringparam,
.get_pauseparam = uec_get_pauseparam,
.set_pauseparam = uec_set_pauseparam,
- .set_sg = ethtool_op_set_sg,
.get_sset_count = uec_get_sset_count,
.get_strings = uec_get_strings,
.get_ethtool_stats = uec_get_ethtool_stats,
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 3ec22c3..9d4f911 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -258,7 +258,7 @@
optionally with LEDs that indicate traffic
config USB_NET_PLUSB
- tristate "Prolific PL-2301/2302 based cables"
+ tristate "Prolific PL-2301/2302/25A1 based cables"
# if the handshake/init/reset problems, from original 'plusb',
# are ever resolved ... then remove "experimental"
depends on USB_USBNET && EXPERIMENTAL
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 6140b56..6998aa6 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -847,7 +847,7 @@
static int ax88172_link_reset(struct usbnet *dev)
{
u8 mode;
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
@@ -856,8 +856,8 @@
if (ecmd.duplex != DUPLEX_FULL)
mode |= ~AX88172_MEDIUM_FD;
- netdev_dbg(dev->net, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
- ecmd.speed, ecmd.duplex, mode);
+ netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+ ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
asix_write_medium_mode(dev, mode);
@@ -947,20 +947,20 @@
static int ax88772_link_reset(struct usbnet *dev)
{
u16 mode;
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
mode = AX88772_MEDIUM_DEFAULT;
- if (ecmd.speed != SPEED_100)
+ if (ethtool_cmd_speed(&ecmd) != SPEED_100)
mode &= ~AX_MEDIUM_PS;
if (ecmd.duplex != DUPLEX_FULL)
mode &= ~AX_MEDIUM_FD;
- netdev_dbg(dev->net, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
- ecmd.speed, ecmd.duplex, mode);
+ netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+ ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
asix_write_medium_mode(dev, mode);
@@ -1173,18 +1173,20 @@
static int ax88178_link_reset(struct usbnet *dev)
{
u16 mode;
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
struct asix_data *data = (struct asix_data *)&dev->data;
+ u32 speed;
netdev_dbg(dev->net, "ax88178_link_reset()\n");
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
mode = AX88178_MEDIUM_DEFAULT;
+ speed = ethtool_cmd_speed(&ecmd);
- if (ecmd.speed == SPEED_1000)
+ if (speed == SPEED_1000)
mode |= AX_MEDIUM_GM;
- else if (ecmd.speed == SPEED_100)
+ else if (speed == SPEED_100)
mode |= AX_MEDIUM_PS;
else
mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
@@ -1196,13 +1198,13 @@
else
mode &= ~AX_MEDIUM_FD;
- netdev_dbg(dev->net, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
- ecmd.speed, ecmd.duplex, mode);
+ netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+ speed, ecmd.duplex, mode);
asix_write_medium_mode(dev, mode);
if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
- marvell_led_status(dev, ecmd.speed);
+ marvell_led_status(dev, speed);
return 0;
}
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 97687d3..d7221c4 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -686,7 +686,7 @@
cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_TP;
cmd->advertising = ADVERTISED_10baseT_Half | ADVERTISED_TP;
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_HALF;
cmd->port = PORT_TP;
cmd->phy_address = 0;
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 341f705..c924ea2 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -460,7 +460,7 @@
.manage_power = cdc_manage_power,
};
-static const struct driver_info mbm_info = {
+static const struct driver_info wwan_info = {
.description = "Mobile Broadband Network Device",
.flags = FLAG_WWAN,
.bind = usbnet_cdc_bind,
@@ -471,6 +471,7 @@
/*-------------------------------------------------------------------------*/
+#define HUAWEI_VENDOR_ID 0x12D1
static const struct usb_device_id products [] = {
/*
@@ -566,7 +567,7 @@
{
USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
- .driver_info = 0,
+ .driver_info = (unsigned long)&wwan_info,
},
/*
@@ -587,8 +588,17 @@
}, {
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long)&mbm_info,
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* Various Huawei modems with a network port like the UMG1831 */
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = HUAWEI_VENDOR_ID,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = 255,
+ .driver_info = (unsigned long)&wwan_info,
},
{ }, // END
};
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 967371f..4ab557d 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -54,7 +54,7 @@
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc.h>
-#define DRIVER_VERSION "7-Feb-2011"
+#define DRIVER_VERSION "06-May-2011"
/* CDC NCM subclass 3.2.1 */
#define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10
@@ -722,7 +722,7 @@
} else {
/* reset variables */
- skb_out = alloc_skb(ctx->tx_max, GFP_ATOMIC);
+ skb_out = alloc_skb((ctx->tx_max + 1), GFP_ATOMIC);
if (skb_out == NULL) {
if (skb != NULL) {
dev_kfree_skb_any(skb);
@@ -861,8 +861,11 @@
/* store last offset */
last_offset = offset;
- if ((last_offset < ctx->tx_max) && ((last_offset %
- le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) {
+ if (((last_offset < ctx->tx_max) && ((last_offset %
+ le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) ||
+ (((last_offset == ctx->tx_max) && ((ctx->tx_max %
+ le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) &&
+ (ctx->tx_max < le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)))) {
/* force short packet */
*(((u8 *)skb_out->data) + last_offset) = 0;
last_offset++;
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5002f5b..1d93133 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -599,13 +599,13 @@
static int dm9601_link_reset(struct usbnet *dev)
{
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
- netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
- ecmd.speed, ecmd.duplex);
+ netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
+ ethtool_cmd_speed(&ecmd), ecmd.duplex);
return 0;
}
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 7d42f9a..81126ff 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -65,6 +65,7 @@
#define IPHETH_USBINTF_PROTO 1
#define IPHETH_BUF_SIZE 1516
+#define IPHETH_IP_ALIGN 2 /* padding at front of URB */
#define IPHETH_TX_TIMEOUT (5 * HZ)
#define IPHETH_INTFNUM 2
@@ -202,18 +203,21 @@
return;
}
- len = urb->actual_length;
- buf = urb->transfer_buffer;
+ if (urb->actual_length <= IPHETH_IP_ALIGN) {
+ dev->net->stats.rx_length_errors++;
+ return;
+ }
+ len = urb->actual_length - IPHETH_IP_ALIGN;
+ buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
- skb = dev_alloc_skb(NET_IP_ALIGN + len);
+ skb = dev_alloc_skb(len);
if (!skb) {
err("%s: dev_alloc_skb: -ENOMEM", __func__);
dev->net->stats.rx_dropped++;
return;
}
- skb_reserve(skb, NET_IP_ALIGN);
- memcpy(skb_put(skb, len), buf + NET_IP_ALIGN, len - NET_IP_ALIGN);
+ memcpy(skb_put(skb, len), buf, len);
skb->dev = dev->net;
skb->protocol = eth_type_trans(skb, dev->net);
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 823c537..217aec8 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -45,6 +45,14 @@
* seems to get wedged under load. Prolific docs are weak, and
* don't identify differences between PL2301 and PL2302, much less
* anything to explain the different PL2302 versions observed.
+ *
+ * NOTE: pl2501 has several modes, including pl2301 and pl2302
+ * compatibility. Some docs suggest the difference between 2301
+ * and 2302 is only to make MS-Windows use a different driver...
+ *
+ * pl25a1 glue based on patch from Tony Gibbs. Prolific "docs" on
+ * this chip are as usual incomplete about what control messages
+ * are supported.
*/
/*
@@ -86,16 +94,20 @@
static int pl_reset(struct usbnet *dev)
{
+ int status;
+
/* some units seem to need this reset, others reject it utterly.
* FIXME be more like "naplink" or windows drivers.
*/
- (void) pl_set_QuickLink_features(dev,
+ status = pl_set_QuickLink_features(dev,
PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+ if (status != 0 && netif_msg_probe(dev))
+ netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
return 0;
}
static const struct driver_info prolific_info = {
- .description = "Prolific PL-2301/PL-2302",
+ .description = "Prolific PL-2301/PL-2302/PL-25A1",
.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT,
/* some PL-2302 versions seem to fail usb_set_interface() */
.reset = pl_reset,
@@ -111,6 +123,7 @@
static const struct usb_device_id products [] = {
+/* full speed cables */
{
USB_DEVICE(0x067b, 0x0000), // PL-2301
.driver_info = (unsigned long) &prolific_info,
@@ -119,6 +132,15 @@
.driver_info = (unsigned long) &prolific_info,
},
+/* high speed cables */
+{
+ USB_DEVICE(0x067b, 0x25a1), /* PL-25A1, no eeprom */
+ .driver_info = (unsigned long) &prolific_info,
+}, {
+ USB_DEVICE(0x050d, 0x258a), /* Belkin F5U258/F5U279 (PL-25A1) */
+ .driver_info = (unsigned long) &prolific_info,
+},
+
{ }, // END
};
MODULE_DEVICE_TABLE(usb, products);
@@ -134,16 +156,16 @@
static int __init plusb_init(void)
{
- return usb_register(&plusb_driver);
+ return usb_register(&plusb_driver);
}
module_init(plusb_init);
static void __exit plusb_exit(void)
{
- usb_deregister(&plusb_driver);
+ usb_deregister(&plusb_driver);
}
module_exit(plusb_exit);
MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
+MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 5994a25..255d6a4 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -104,8 +104,10 @@
int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
{
struct cdc_state *info = (void *) &dev->data;
+ struct usb_cdc_notification notification;
int master_ifnum;
int retval;
+ int partial;
unsigned count;
__le32 rsp;
u32 xid = 0, msg_len, request_id;
@@ -133,13 +135,20 @@
if (unlikely(retval < 0 || xid == 0))
return retval;
- // FIXME Seems like some devices discard responses when
- // we time out and cancel our "get response" requests...
- // so, this is fragile. Probably need to poll for status.
+ /* Some devices don't respond on the control channel until
+ * polled on the status channel, so do that first. */
+ if (dev->driver_info->data & RNDIS_DRIVER_DATA_POLL_STATUS) {
+ retval = usb_interrupt_msg(
+ dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->status->desc.bEndpointAddress),
+ ¬ification, sizeof(notification), &partial,
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (unlikely(retval < 0))
+ return retval;
+ }
- /* ignore status endpoint, just poll the control channel;
- * the request probably completed immediately
- */
+ /* Poll the control channel; the request probably completed immediately */
rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
for (count = 0; count < 10; count++) {
memset(buf, 0, CONTROL_BUFFER_SIZE);
@@ -581,17 +590,33 @@
.tx_fixup = rndis_tx_fixup,
};
+static const struct driver_info rndis_poll_status_info = {
+ .description = "RNDIS device (poll status before control)",
+ .flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .data = RNDIS_DRIVER_DATA_POLL_STATUS,
+ .bind = rndis_bind,
+ .unbind = rndis_unbind,
+ .status = rndis_status,
+ .rx_fixup = rndis_rx_fixup,
+ .tx_fixup = rndis_tx_fixup,
+};
+
/*-------------------------------------------------------------------------*/
static const struct usb_device_id products [] = {
{
+ /* 2Wire HomePortal 1000SW */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042,
+ USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+ .driver_info = (unsigned long) &rndis_poll_status_info,
+}, {
/* RNDIS is MSFT's un-official variant of CDC ACM */
USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
.driver_info = (unsigned long) &rndis_info,
}, {
/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
- .driver_info = (unsigned long) &rndis_info,
+ .driver_info = (unsigned long) &rndis_poll_status_info,
}, {
/* RNDIS for tethering */
USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index e85c89c..041fb7d 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -843,10 +843,11 @@
get_registers(dev, BMCR, 2, &bmcr);
get_registers(dev, ANLP, 2, &lpa);
if (bmcr & BMCR_ANENABLE) {
+ u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
+ SPEED_100 : SPEED_10);
+ ethtool_cmd_speed_set(ecmd, speed);
ecmd->autoneg = AUTONEG_ENABLE;
- ecmd->speed = (lpa & (LPA_100HALF | LPA_100FULL)) ?
- SPEED_100 : SPEED_10;
- if (ecmd->speed == SPEED_100)
+ if (speed == SPEED_100)
ecmd->duplex = (lpa & LPA_100FULL) ?
DUPLEX_FULL : DUPLEX_HALF;
else
@@ -854,8 +855,8 @@
DUPLEX_FULL : DUPLEX_HALF;
} else {
ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->speed = (bmcr & BMCR_SPEED100) ?
- SPEED_100 : SPEED_10;
+ ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10));
ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
}
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 753ee6e..15b3d68 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -65,7 +65,6 @@
struct usbnet *dev;
u32 rfe_ctl;
u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
- bool use_rx_csum;
struct mutex dataport_mutex;
spinlock_t rfe_ctl_lock;
struct work_struct set_multicast;
@@ -504,7 +503,7 @@
static int smsc75xx_link_reset(struct usbnet *dev)
{
struct mii_if_info *mii = &dev->mii;
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
u16 lcladv, rmtadv;
int ret;
@@ -520,8 +519,9 @@
lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
- netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x"
- " rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+ netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
+ " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
+ ecmd.duplex, lcladv, rmtadv);
return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
}
@@ -548,28 +548,6 @@
"unexpected interrupt, intdata=0x%08X", intdata);
}
-/* Enable or disable Rx checksum offload engine */
-static int smsc75xx_set_rx_csum_offload(struct usbnet *dev)
-{
- struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
-
- if (pdata->use_rx_csum)
- pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
- else
- pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
-
- spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
-
- ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
- check_warn_return(ret, "Error writing RFE_CTL");
-
- return 0;
-}
-
static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
{
return MAX_EEPROM_SIZE;
@@ -599,34 +577,6 @@
return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
}
-static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev)
-{
- struct usbnet *dev = netdev_priv(netdev);
- struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-
- return pdata->use_rx_csum;
-}
-
-static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
-{
- struct usbnet *dev = netdev_priv(netdev);
- struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-
- pdata->use_rx_csum = !!val;
-
- return smsc75xx_set_rx_csum_offload(dev);
-}
-
-static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data)
-{
- if (data)
- netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
- else
- netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
- return 0;
-}
-
static const struct ethtool_ops smsc75xx_ethtool_ops = {
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
@@ -638,12 +588,6 @@
.get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
.get_eeprom = smsc75xx_ethtool_get_eeprom,
.set_eeprom = smsc75xx_ethtool_set_eeprom,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .get_rx_csum = smsc75xx_ethtool_get_rx_csum,
- .set_rx_csum = smsc75xx_ethtool_set_rx_csum,
- .get_tso = ethtool_op_get_tso,
- .set_tso = smsc75xx_ethtool_set_tso,
};
static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -782,6 +726,30 @@
return usbnet_change_mtu(netdev, new_mtu);
}
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_features(struct net_device *netdev, u32 features)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+ if (features & NETIF_F_RXCSUM)
+ pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+ else
+ pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+ spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+ /* it's racing here! */
+
+ ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+ check_warn_return(ret, "Error writing RFE_CTL");
+
+ return 0;
+}
+
static int smsc75xx_reset(struct usbnet *dev)
{
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
@@ -960,11 +928,7 @@
netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
/* Enable or disable checksum offload engines */
- ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE);
- ret = smsc75xx_set_rx_csum_offload(dev);
- check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
-
- smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE);
+ smsc75xx_set_features(dev->net, dev->net->features);
smsc75xx_set_multicast(dev->net);
@@ -1037,6 +1001,7 @@
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = smsc75xx_ioctl,
.ndo_set_multicast_list = smsc75xx_set_multicast,
+ .ndo_set_features = smsc75xx_set_features,
};
static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -1065,10 +1030,17 @@
INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
- pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+ if (DEFAULT_TX_CSUM_ENABLE) {
+ dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ if (DEFAULT_TSO_ENABLE)
+ dev->net->features |= NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_TSO6;
+ }
+ if (DEFAULT_RX_CSUM_ENABLE)
+ dev->net->features |= NETIF_F_RXCSUM;
- /* We have to advertise SG otherwise TSO cannot be enabled */
- dev->net->features |= NETIF_F_SG;
+ dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM;
/* Init all registers */
ret = smsc75xx_reset(dev);
@@ -1091,10 +1063,11 @@
}
}
-static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a,
- u32 rx_cmd_b)
+static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
+ u32 rx_cmd_a, u32 rx_cmd_b)
{
- if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+ if (!(dev->net->features & NETIF_F_RXCSUM) ||
+ unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
skb->ip_summed = CHECKSUM_NONE;
} else {
skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
@@ -1104,8 +1077,6 @@
static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
- struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-
while (skb->len > 0) {
u32 rx_cmd_a, rx_cmd_b, align_count, size;
struct sk_buff *ax_skb;
@@ -1145,11 +1116,8 @@
/* last frame in this batch */
if (skb->len == size) {
- if (pdata->use_rx_csum)
- smsc75xx_rx_csum_offload(skb, rx_cmd_a,
- rx_cmd_b);
- else
- skb->ip_summed = CHECKSUM_NONE;
+ smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
+ rx_cmd_b);
skb_trim(skb, skb->len - 4); /* remove fcs */
skb->truesize = size + sizeof(struct sk_buff);
@@ -1167,11 +1135,8 @@
ax_skb->data = packet;
skb_set_tail_pointer(ax_skb, size);
- if (pdata->use_rx_csum)
- smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a,
- rx_cmd_b);
- else
- ax_skb->ip_summed = CHECKSUM_NONE;
+ smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
+ rx_cmd_b);
skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
ax_skb->truesize = size + sizeof(struct sk_buff);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 47a6c87..f74f3ce 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -52,8 +52,6 @@
u32 hash_hi;
u32 hash_lo;
spinlock_t mac_cr_lock;
- bool use_tx_csum;
- bool use_rx_csum;
};
struct usb_context {
@@ -459,7 +457,7 @@
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
struct mii_if_info *mii = &dev->mii;
- struct ethtool_cmd ecmd;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
unsigned long flags;
u16 lcladv, rmtadv;
u32 intdata;
@@ -474,8 +472,9 @@
lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
- netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x\n",
- ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+ netif_dbg(dev, link, dev->net,
+ "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+ ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
if (ecmd.duplex != DUPLEX_FULL) {
@@ -517,22 +516,24 @@
}
/* Enable or disable Tx & Rx checksum offload engines */
-static int smsc95xx_set_csums(struct usbnet *dev)
+static int smsc95xx_set_features(struct net_device *netdev, u32 features)
{
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+ struct usbnet *dev = netdev_priv(netdev);
u32 read_buf;
- int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+ int ret;
+
+ ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
if (ret < 0) {
netdev_warn(dev->net, "Failed to read COE_CR: %d\n", ret);
return ret;
}
- if (pdata->use_tx_csum)
+ if (features & NETIF_F_HW_CSUM)
read_buf |= Tx_COE_EN_;
else
read_buf &= ~Tx_COE_EN_;
- if (pdata->use_rx_csum)
+ if (features & NETIF_F_RXCSUM)
read_buf |= Rx_COE_EN_;
else
read_buf &= ~Rx_COE_EN_;
@@ -576,43 +577,6 @@
return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
}
-static u32 smsc95xx_ethtool_get_rx_csum(struct net_device *netdev)
-{
- struct usbnet *dev = netdev_priv(netdev);
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
- return pdata->use_rx_csum;
-}
-
-static int smsc95xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
-{
- struct usbnet *dev = netdev_priv(netdev);
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
- pdata->use_rx_csum = !!val;
-
- return smsc95xx_set_csums(dev);
-}
-
-static u32 smsc95xx_ethtool_get_tx_csum(struct net_device *netdev)
-{
- struct usbnet *dev = netdev_priv(netdev);
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
- return pdata->use_tx_csum;
-}
-
-static int smsc95xx_ethtool_set_tx_csum(struct net_device *netdev, u32 val)
-{
- struct usbnet *dev = netdev_priv(netdev);
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
- pdata->use_tx_csum = !!val;
-
- ethtool_op_set_tx_hw_csum(netdev, pdata->use_tx_csum);
- return smsc95xx_set_csums(dev);
-}
-
static const struct ethtool_ops smsc95xx_ethtool_ops = {
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
@@ -624,10 +588,6 @@
.get_eeprom_len = smsc95xx_ethtool_get_eeprom_len,
.get_eeprom = smsc95xx_ethtool_get_eeprom,
.set_eeprom = smsc95xx_ethtool_set_eeprom,
- .get_tx_csum = smsc95xx_ethtool_get_tx_csum,
- .set_tx_csum = smsc95xx_ethtool_set_tx_csum,
- .get_rx_csum = smsc95xx_ethtool_get_rx_csum,
- .set_rx_csum = smsc95xx_ethtool_set_rx_csum,
};
static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -730,7 +690,7 @@
msleep(10);
bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
timeout++;
- } while ((bmcr & MII_BMCR) && (timeout < 100));
+ } while ((bmcr & BMCR_RESET) && (timeout < 100));
if (timeout >= 100) {
netdev_warn(dev->net, "timeout on PHY Reset");
@@ -755,7 +715,6 @@
static int smsc95xx_reset(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
- struct net_device *netdev = dev->net;
u32 read_buf, write_buf, burst_cap;
int ret = 0, timeout;
@@ -975,12 +934,7 @@
}
/* Enable or disable checksum offload engines */
- ethtool_op_set_tx_hw_csum(netdev, pdata->use_tx_csum);
- ret = smsc95xx_set_csums(dev);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to set csum offload: %d\n", ret);
- return ret;
- }
+ smsc95xx_set_features(dev->net, dev->net->features);
smsc95xx_set_multicast(dev->net);
@@ -1019,6 +973,7 @@
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = smsc95xx_ioctl,
.ndo_set_multicast_list = smsc95xx_set_multicast,
+ .ndo_set_features = smsc95xx_set_features,
};
static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -1045,8 +1000,12 @@
spin_lock_init(&pdata->mac_cr_lock);
- pdata->use_tx_csum = DEFAULT_TX_CSUM_ENABLE;
- pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+ if (DEFAULT_TX_CSUM_ENABLE)
+ dev->net->features |= NETIF_F_HW_CSUM;
+ if (DEFAULT_RX_CSUM_ENABLE)
+ dev->net->features |= NETIF_F_RXCSUM;
+
+ dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
smsc95xx_init_mac_address(dev);
@@ -1056,7 +1015,7 @@
dev->net->netdev_ops = &smsc95xx_netdev_ops;
dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
dev->net->flags |= IFF_MULTICAST;
- dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD;
+ dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
return 0;
}
@@ -1080,8 +1039,6 @@
static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
while (skb->len > 0) {
u32 header, align_count;
struct sk_buff *ax_skb;
@@ -1123,7 +1080,7 @@
/* last frame in this batch */
if (skb->len == size) {
- if (pdata->use_rx_csum)
+ if (dev->net->features & NETIF_F_RXCSUM)
smsc95xx_rx_csum_offload(skb);
skb_trim(skb, skb->len - 4); /* remove fcs */
skb->truesize = size + sizeof(struct sk_buff);
@@ -1141,7 +1098,7 @@
ax_skb->data = packet;
skb_set_tail_pointer(ax_skb, size);
- if (pdata->use_rx_csum)
+ if (dev->net->features & NETIF_F_RXCSUM)
smsc95xx_rx_csum_offload(ax_skb);
skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
ax_skb->truesize = size + sizeof(struct sk_buff);
@@ -1174,8 +1131,7 @@
static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
struct sk_buff *skb, gfp_t flags)
{
- struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
- bool csum = pdata->use_tx_csum && (skb->ip_summed == CHECKSUM_PARTIAL);
+ bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
u32 tx_cmd_a, tx_cmd_b;
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf..e6dd244 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -645,6 +645,7 @@
struct driver_info *info = dev->driver_info;
int retval;
+ clear_bit(EVENT_DEV_OPEN, &dev->flags);
netif_stop_queue (net);
netif_info(dev, ifdown, dev->net,
@@ -736,6 +737,7 @@
}
}
+ set_bit(EVENT_DEV_OPEN, &dev->flags);
netif_start_queue (net);
netif_info(dev, ifup, dev->net,
"open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
@@ -1259,6 +1261,9 @@
if (dev->driver_info->unbind)
dev->driver_info->unbind (dev, intf);
+ usb_kill_urb(dev->interrupt);
+ usb_free_urb(dev->interrupt);
+
free_netdev(net);
usb_put_dev (xdev);
}
@@ -1498,6 +1503,10 @@
int retval;
if (!--dev->suspend_count) {
+ /* resume interrupt URBs */
+ if (dev->interrupt && test_bit(EVENT_DEV_OPEN, &dev->flags))
+ usb_submit_urb(dev->interrupt, GFP_NOIO);
+
spin_lock_irq(&dev->txq.lock);
while ((res = usb_get_from_anchor(&dev->deferred))) {
@@ -1516,9 +1525,12 @@
smp_mb();
clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
spin_unlock_irq(&dev->txq.lock);
- if (!(dev->txq.qlen >= TX_QLEN(dev)))
- netif_start_queue(dev->net);
- tasklet_schedule (&dev->bh);
+
+ if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+ if (!(dev->txq.qlen >= TX_QLEN(dev)))
+ netif_start_queue(dev->net);
+ tasklet_schedule (&dev->bh);
+ }
}
return 0;
}
@@ -1529,9 +1541,9 @@
static int __init usbnet_init(void)
{
- /* compiler should optimize this out */
- BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb)
- < sizeof (struct skb_data));
+ /* Compiler should optimize this out. */
+ BUILD_BUG_ON(
+ FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
random_ether_addr(node_id);
return 0;
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 2de9b90..8461576 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -22,7 +22,6 @@
#define MIN_MTU 68 /* Min L3 MTU */
#define MAX_MTU 65535 /* Max L3 MTU (arbitrary) */
-#define MTU_PAD (ETH_HLEN + 4) /* Max difference between L2 and L3 size MTU */
struct veth_net_stats {
unsigned long rx_packets;
@@ -36,7 +35,6 @@
struct veth_priv {
struct net_device *peer;
struct veth_net_stats __percpu *stats;
- unsigned ip_summed;
};
/*
@@ -53,7 +51,7 @@
{
cmd->supported = 0;
cmd->advertising = 0;
- cmd->speed = SPEED_10000;
+ ethtool_cmd_speed_set(cmd, SPEED_10000);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_TP;
cmd->phy_address = 0;
@@ -99,47 +97,10 @@
data[0] = priv->peer->ifindex;
}
-static u32 veth_get_rx_csum(struct net_device *dev)
-{
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- return priv->ip_summed == CHECKSUM_UNNECESSARY;
-}
-
-static int veth_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- priv->ip_summed = data ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE;
- return 0;
-}
-
-static u32 veth_get_tx_csum(struct net_device *dev)
-{
- return (dev->features & NETIF_F_NO_CSUM) != 0;
-}
-
-static int veth_set_tx_csum(struct net_device *dev, u32 data)
-{
- if (data)
- dev->features |= NETIF_F_NO_CSUM;
- else
- dev->features &= ~NETIF_F_NO_CSUM;
- return 0;
-}
-
static const struct ethtool_ops veth_ethtool_ops = {
.get_settings = veth_get_settings,
.get_drvinfo = veth_get_drvinfo,
.get_link = ethtool_op_get_link,
- .get_rx_csum = veth_get_rx_csum,
- .set_rx_csum = veth_set_rx_csum,
- .get_tx_csum = veth_get_tx_csum,
- .set_tx_csum = veth_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
.get_strings = veth_get_strings,
.get_sset_count = veth_get_sset_count,
.get_ethtool_stats = veth_get_ethtool_stats,
@@ -168,8 +129,9 @@
/* don't change ip_summed == CHECKSUM_PARTIAL, as that
will cause bad checksum on forwarded packets */
- if (skb->ip_summed == CHECKSUM_NONE)
- skb->ip_summed = rcv_priv->ip_summed;
+ if (skb->ip_summed == CHECKSUM_NONE &&
+ rcv->features & NETIF_F_RXCSUM)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
length = skb->len;
if (dev_forward_skb(rcv, skb) != NET_RX_SUCCESS)
@@ -304,6 +266,8 @@
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
dev->destructor = veth_dev_free;
+
+ dev->hw_features = NETIF_F_NO_CSUM | NETIF_F_SG | NETIF_F_RXCSUM;
}
/*
@@ -403,6 +367,17 @@
if (tb[IFLA_ADDRESS] == NULL)
random_ether_addr(dev->dev_addr);
+ if (tb[IFLA_IFNAME])
+ nla_strlcpy(dev->name, tb[IFLA_IFNAME], IFNAMSIZ);
+ else
+ snprintf(dev->name, IFNAMSIZ, DRV_NAME "%%d");
+
+ if (strchr(dev->name, '%')) {
+ err = dev_alloc_name(dev, dev->name);
+ if (err < 0)
+ goto err_alloc_name;
+ }
+
err = register_netdevice(dev);
if (err < 0)
goto err_register_dev;
@@ -422,6 +397,7 @@
err_register_dev:
/* nothing to do */
+err_alloc_name:
err_configure_peer:
unregister_netdevice(peer);
return err;
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index eb5d75d..7f23ab9 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -29,6 +29,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "via-rhine"
#define DRV_VERSION "1.5.0"
#define DRV_RELDATE "2010-10-09"
@@ -37,6 +39,7 @@
/* A few user-configurable values.
These may be modified when a driver module is loaded. */
+#define DEBUG
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
static int max_interrupt_work = 20;
@@ -111,8 +114,7 @@
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
- KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE
- " Written by Donald Becker\n";
+ "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker";
/* This driver was written to use PCI memory space. Some early versions
of the Rhine may only work correctly with I/O space accesses. */
@@ -495,14 +497,15 @@
static void rhine_init_cam_filter(struct net_device *dev);
static void rhine_update_vcam(struct net_device *dev);
-#define RHINE_WAIT_FOR(condition) do { \
- int i=1024; \
- while (!(condition) && --i) \
- ; \
- if (debug > 1 && i < 512) \
- printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n", \
- DRV_NAME, 1024-i, __func__, __LINE__); \
-} while(0)
+#define RHINE_WAIT_FOR(condition) \
+do { \
+ int i = 1024; \
+ while (!(condition) && --i) \
+ ; \
+ if (debug > 1 && i < 512) \
+ pr_info("%4d cycles used @ %s:%d\n", \
+ 1024 - i, __func__, __LINE__); \
+} while (0)
static inline u32 get_intr_status(struct net_device *dev)
{
@@ -571,8 +574,8 @@
default:
reason = "Unknown";
}
- printk(KERN_INFO "%s: Woke system up. Reason: %s.\n",
- DRV_NAME, reason);
+ netdev_info(dev, "Woke system up. Reason: %s\n",
+ reason);
}
}
}
@@ -586,8 +589,7 @@
IOSYNC;
if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
- printk(KERN_INFO "%s: Reset not complete yet. "
- "Trying harder.\n", DRV_NAME);
+ netdev_info(dev, "Reset not complete yet. Trying harder.\n");
/* Force reset */
if (rp->quirks & rqForceReset)
@@ -598,9 +600,9 @@
}
if (debug > 1)
- printk(KERN_INFO "%s: Reset %s.\n", dev->name,
- (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
- "failed" : "succeeded");
+ netdev_info(dev, "Reset %s\n",
+ (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
+ "failed" : "succeeded");
}
#ifdef USE_MMIO
@@ -728,9 +730,7 @@
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
- static int printed_version;
- if (!printed_version++)
- printk(version);
+ pr_info_once("%s\n", version);
#endif
io_size = 256;
@@ -765,8 +765,8 @@
/* this should always be supported */
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
- printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
- "the card!?\n");
+ dev_err(&pdev->dev,
+ "32-bit PCI DMA addresses not supported by the card!?\n");
goto err_out;
}
@@ -774,7 +774,7 @@
if ((pci_resource_len(pdev, 0) < io_size) ||
(pci_resource_len(pdev, 1) < io_size)) {
rc = -EIO;
- printk(KERN_ERR "Insufficient PCI resources, aborting\n");
+ dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n");
goto err_out;
}
@@ -786,7 +786,7 @@
dev = alloc_etherdev(sizeof(struct rhine_private));
if (!dev) {
rc = -ENOMEM;
- printk(KERN_ERR "alloc_etherdev failed\n");
+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
goto err_out;
}
SET_NETDEV_DEV(dev, &pdev->dev);
@@ -804,8 +804,9 @@
ioaddr = pci_iomap(pdev, bar, io_size);
if (!ioaddr) {
rc = -EIO;
- printk(KERN_ERR "ioremap failed for device %s, region 0x%X "
- "@ 0x%lX\n", pci_name(pdev), io_size, memaddr);
+ dev_err(&pdev->dev,
+ "ioremap failed for device %s, region 0x%X @ 0x%lX\n",
+ pci_name(pdev), io_size, memaddr);
goto err_out_free_res;
}
@@ -820,8 +821,9 @@
unsigned char b = readb(ioaddr+reg);
if (a != b) {
rc = -EIO;
- printk(KERN_ERR "MMIO do not match PIO [%02x] "
- "(%02x != %02x)\n", reg, a, b);
+ dev_err(&pdev->dev,
+ "MMIO do not match PIO [%02x] (%02x != %02x)\n",
+ reg, a, b);
goto err_out_unmap;
}
}
@@ -836,13 +838,15 @@
for (i = 0; i < 6; i++)
dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- if (!is_valid_ether_addr(dev->perm_addr)) {
- rc = -EIO;
- printk(KERN_ERR "Invalid MAC address\n");
- goto err_out_unmap;
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ /* Report it and use a random ethernet address instead */
+ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
+ random_ether_addr(dev->dev_addr);
+ netdev_info(dev, "Using random MAC address: %pM\n",
+ dev->dev_addr);
}
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* For Rhine-I/II, phy_id is loaded from EEPROM */
if (!phy_id)
@@ -878,14 +882,14 @@
if (rc)
goto err_out_unmap;
- printk(KERN_INFO "%s: VIA %s at 0x%lx, %pM, IRQ %d.\n",
- dev->name, name,
+ netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n",
+ name,
#ifdef USE_MMIO
- memaddr,
+ memaddr,
#else
- (long)ioaddr,
+ (long)ioaddr,
#endif
- dev->dev_addr, pdev->irq);
+ dev->dev_addr, pdev->irq);
pci_set_drvdata(pdev, dev);
@@ -896,11 +900,11 @@
mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
if (mii_status != 0xffff && mii_status != 0x0000) {
rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
- printk(KERN_INFO "%s: MII PHY found at address "
- "%d, status 0x%4.4x advertising %4.4x "
- "Link %4.4x.\n", dev->name, phy_id,
- mii_status, rp->mii_if.advertising,
- mdio_read(dev, phy_id, 5));
+ netdev_info(dev,
+ "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
+ phy_id,
+ mii_status, rp->mii_if.advertising,
+ mdio_read(dev, phy_id, 5));
/* set IFF_RUNNING */
if (mii_status & BMSR_LSTATUS)
@@ -912,8 +916,7 @@
}
rp->mii_if.phy_id = phy_id;
if (debug > 1 && avoid_D3)
- printk(KERN_INFO "%s: No D3 power state at shutdown.\n",
- dev->name);
+ netdev_info(dev, "No D3 power state at shutdown\n");
return 0;
@@ -938,7 +941,7 @@
TX_RING_SIZE * sizeof(struct tx_desc),
&ring_dma);
if (!ring) {
- printk(KERN_ERR "Could not allocate DMA memory.\n");
+ netdev_err(dev, "Could not allocate DMA memory\n");
return -ENOMEM;
}
if (rp->quirks & rqRhineI) {
@@ -1098,8 +1101,8 @@
iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
ioaddr + ChipCmd1);
if (debug > 1)
- printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name,
- rp->mii_if.force_media, netif_carrier_ok(dev));
+ netdev_info(dev, "force_media %d, carrier %d\n",
+ rp->mii_if.force_media, netif_carrier_ok(dev));
}
/* Called after status of force_media possibly changed */
@@ -1113,9 +1116,8 @@
else /* Let MMI library update carrier status */
rhine_check_media(mii->dev, 0);
if (debug > 1)
- printk(KERN_INFO "%s: force_media %d, carrier %d\n",
- mii->dev->name, mii->force_media,
- netif_carrier_ok(mii->dev));
+ netdev_info(mii->dev, "force_media %d, carrier %d\n",
+ mii->force_media, netif_carrier_ok(mii->dev));
}
/**
@@ -1402,8 +1404,7 @@
return rc;
if (debug > 1)
- printk(KERN_DEBUG "%s: rhine_open() irq %d.\n",
- dev->name, rp->pdev->irq);
+ netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq);
rc = alloc_ring(dev);
if (rc) {
@@ -1415,10 +1416,9 @@
rhine_chip_reset(dev);
init_registers(dev);
if (debug > 2)
- printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x "
- "MII status: %4.4x.\n",
- dev->name, ioread16(ioaddr + ChipCmd),
- mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+ netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n",
+ __func__, ioread16(ioaddr + ChipCmd),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
netif_start_queue(dev);
@@ -1461,10 +1461,9 @@
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
- printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
- "%4.4x, resetting...\n",
- dev->name, ioread16(ioaddr + IntrStatus),
- mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+ netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
+ ioread16(ioaddr + IntrStatus),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
schedule_work(&rp->reset_task);
}
@@ -1551,8 +1550,8 @@
spin_unlock_irqrestore(&rp->lock, flags);
if (debug > 4) {
- printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
- dev->name, rp->cur_tx-1, entry);
+ netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+ rp->cur_tx-1, entry);
}
return NETDEV_TX_OK;
}
@@ -1578,8 +1577,8 @@
IOSYNC;
if (debug > 4)
- printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n",
- dev->name, intr_status);
+ netdev_dbg(dev, "Interrupt, status %08x\n",
+ intr_status);
if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
@@ -1597,9 +1596,9 @@
RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
if (debug > 2 &&
ioread8(ioaddr+ChipCmd) & CmdTxOn)
- printk(KERN_WARNING "%s: "
- "rhine_interrupt() Tx engine "
- "still on.\n", dev->name);
+ netdev_warn(dev,
+ "%s: Tx engine still on\n",
+ __func__);
}
rhine_tx(dev);
}
@@ -1611,16 +1610,15 @@
rhine_error(dev, intr_status);
if (--boguscnt < 0) {
- printk(KERN_WARNING "%s: Too much work at interrupt, "
- "status=%#8.8x.\n",
- dev->name, intr_status);
+ netdev_warn(dev, "Too much work at interrupt, status=%#08x\n",
+ intr_status);
break;
}
}
if (debug > 3)
- printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n",
- dev->name, ioread16(ioaddr + IntrStatus));
+ netdev_dbg(dev, "exiting interrupt, status=%08x\n",
+ ioread16(ioaddr + IntrStatus));
return IRQ_RETVAL(handled);
}
@@ -1637,15 +1635,14 @@
while (rp->dirty_tx != rp->cur_tx) {
txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
if (debug > 6)
- printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n",
- entry, txstatus);
+ netdev_dbg(dev, "Tx scavenge %d status %08x\n",
+ entry, txstatus);
if (txstatus & DescOwn)
break;
if (txstatus & 0x8000) {
if (debug > 1)
- printk(KERN_DEBUG "%s: Transmit error, "
- "Tx status %8.8x.\n",
- dev->name, txstatus);
+ netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+ txstatus);
dev->stats.tx_errors++;
if (txstatus & 0x0400)
dev->stats.tx_carrier_errors++;
@@ -1668,9 +1665,9 @@
else
dev->stats.collisions += txstatus & 0x0F;
if (debug > 6)
- printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
- (txstatus >> 3) & 0xF,
- txstatus & 0xF);
+ netdev_dbg(dev, "collisions: %1.1x:%1.1x\n",
+ (txstatus >> 3) & 0xF,
+ txstatus & 0xF);
dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
dev->stats.tx_packets++;
}
@@ -1703,7 +1700,7 @@
static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
{
u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
- return ntohs(*(u16 *)trailer);
+ return be16_to_cpup((__be16 *)trailer);
}
/* Process up to limit frames from receive ring */
@@ -1714,9 +1711,9 @@
int entry = rp->cur_rx % RX_RING_SIZE;
if (debug > 4) {
- printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
- dev->name, entry,
- le32_to_cpu(rp->rx_head_desc->rx_status));
+ netdev_dbg(dev, "%s(), entry %d status %08x\n",
+ __func__, entry,
+ le32_to_cpu(rp->rx_head_desc->rx_status));
}
/* If EOP is set on the next entry, it's a new packet. Send it up. */
@@ -1730,26 +1727,26 @@
break;
if (debug > 4)
- printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n",
- desc_status);
+ netdev_dbg(dev, "%s() status is %08x\n",
+ __func__, desc_status);
if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
if ((desc_status & RxWholePkt) != RxWholePkt) {
- printk(KERN_WARNING "%s: Oversized Ethernet "
- "frame spanned multiple buffers, entry "
- "%#x length %d status %8.8x!\n",
- dev->name, entry, data_size,
- desc_status);
- printk(KERN_WARNING "%s: Oversized Ethernet "
- "frame %p vs %p.\n", dev->name,
- rp->rx_head_desc, &rp->rx_ring[entry]);
+ netdev_warn(dev,
+ "Oversized Ethernet frame spanned multiple buffers, "
+ "entry %#x length %d status %08x!\n",
+ entry, data_size,
+ desc_status);
+ netdev_warn(dev,
+ "Oversized Ethernet frame %p vs %p\n",
+ rp->rx_head_desc,
+ &rp->rx_ring[entry]);
dev->stats.rx_length_errors++;
} else if (desc_status & RxErr) {
/* There was a error. */
if (debug > 2)
- printk(KERN_DEBUG "rhine_rx() Rx "
- "error was %8.8x.\n",
- desc_status);
+ netdev_dbg(dev, "%s() Rx error was %08x\n",
+ __func__, desc_status);
dev->stats.rx_errors++;
if (desc_status & 0x0030)
dev->stats.rx_length_errors++;
@@ -1791,9 +1788,7 @@
} else {
skb = rp->rx_skbuff[entry];
if (skb == NULL) {
- printk(KERN_ERR "%s: Inconsistent Rx "
- "descriptor chain.\n",
- dev->name);
+ netdev_err(dev, "Inconsistent Rx descriptor chain\n");
break;
}
rp->rx_skbuff[entry] = NULL;
@@ -1886,9 +1881,8 @@
else {
/* This should never happen */
if (debug > 1)
- printk(KERN_WARNING "%s: rhine_restart_tx() "
- "Another error occurred %8.8x.\n",
- dev->name, intr_status);
+ netdev_warn(dev, "%s() Another error occurred %08x\n",
+ __func__, intr_status);
}
}
@@ -1909,21 +1903,19 @@
}
if (intr_status & IntrTxAborted) {
if (debug > 1)
- printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n",
- dev->name, intr_status);
+ netdev_info(dev, "Abort %08x, frame dropped\n",
+ intr_status);
}
if (intr_status & IntrTxUnderrun) {
if (rp->tx_thresh < 0xE0)
BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
if (debug > 1)
- printk(KERN_INFO "%s: Transmitter underrun, Tx "
- "threshold now %2.2x.\n",
- dev->name, rp->tx_thresh);
+ netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n",
+ rp->tx_thresh);
}
if (intr_status & IntrTxDescRace) {
if (debug > 2)
- printk(KERN_INFO "%s: Tx descriptor write-back race.\n",
- dev->name);
+ netdev_info(dev, "Tx descriptor write-back race\n");
}
if ((intr_status & IntrTxError) &&
(intr_status & (IntrTxAborted |
@@ -1932,9 +1924,8 @@
BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
}
if (debug > 1)
- printk(KERN_INFO "%s: Unspecified error. Tx "
- "threshold now %2.2x.\n",
- dev->name, rp->tx_thresh);
+ netdev_info(dev, "Unspecified error. Tx threshold now %02x\n",
+ rp->tx_thresh);
}
if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
IntrTxError))
@@ -1944,8 +1935,8 @@
IntrTxError | IntrTxAborted | IntrNormalSummary |
IntrTxDescRace)) {
if (debug > 1)
- printk(KERN_ERR "%s: Something Wicked happened! "
- "%8.8x.\n", dev->name, intr_status);
+ netdev_err(dev, "Something Wicked happened! %08x\n",
+ intr_status);
}
spin_unlock(&rp->lock);
@@ -2145,9 +2136,8 @@
spin_lock_irq(&rp->lock);
if (debug > 1)
- printk(KERN_DEBUG "%s: Shutting down ethercard, "
- "status was %4.4x.\n",
- dev->name, ioread16(ioaddr + ChipCmd));
+ netdev_dbg(dev, "Shutting down ethercard, status was %04x\n",
+ ioread16(ioaddr + ChipCmd));
/* Switch to loopback mode to avoid hardware races. */
iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
@@ -2265,12 +2255,12 @@
return 0;
if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
- printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
+ netdev_err(dev, "request_irq failed\n");
ret = pci_set_power_state(pdev, PCI_D0);
if (debug > 1)
- printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n",
- dev->name, ret ? "failed" : "succeeded", ret);
+ netdev_info(dev, "Entering power state D0 %s (%d)\n",
+ ret ? "failed" : "succeeded", ret);
pci_restore_state(pdev);
@@ -2326,17 +2316,15 @@
{
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
- printk(version);
+ pr_info("%s\n", version);
#endif
if (dmi_check_system(rhine_dmi_table)) {
/* these BIOSes fail at PXE boot if chip is in D3 */
avoid_D3 = 1;
- printk(KERN_WARNING "%s: Broken BIOS detected, avoid_D3 "
- "enabled.\n",
- DRV_NAME);
+ pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
}
else if (avoid_D3)
- printk(KERN_INFO "%s: avoid_D3 set.\n", DRV_NAME);
+ pr_info("avoid_D3 set\n");
return pci_register_driver(&rhine_driver);
}
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 4fe0517..06daa9d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2600,8 +2600,7 @@
/*
* Handle hardware checksum
*/
- if ((dev->features & NETIF_F_IP_CSUM) &&
- (skb->ip_summed == CHECKSUM_PARTIAL)) {
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
const struct iphdr *ip = ip_hdr(skb);
if (ip->protocol == IPPROTO_TCP)
td_ptr->tdesc1.TCR |= TCR0_TCPCK;
@@ -2841,6 +2840,7 @@
dev->ethtool_ops = &velocity_ethtool_ops;
netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HW_VLAN_TX;
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
@@ -3182,7 +3182,8 @@
pci_set_power_state(vptr->pdev, PCI_D3hot);
}
-static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int velocity_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
{
struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem *regs = vptr->mac_regs;
@@ -3228,12 +3229,14 @@
break;
}
}
+
if (status & VELOCITY_SPEED_1000)
- cmd->speed = SPEED_1000;
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
else if (status & VELOCITY_SPEED_100)
- cmd->speed = SPEED_100;
+ ethtool_cmd_speed_set(cmd, SPEED_100);
else
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
+
cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
cmd->port = PORT_TP;
cmd->transceiver = XCVR_INTERNAL;
@@ -3247,9 +3250,11 @@
return 0;
}
-static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int velocity_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
{
struct velocity_info *vptr = netdev_priv(dev);
+ u32 speed = ethtool_cmd_speed(cmd);
u32 curr_status;
u32 new_status = 0;
int ret = 0;
@@ -3258,9 +3263,9 @@
curr_status &= (~VELOCITY_LINK_FAIL);
new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
- new_status |= ((cmd->speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
- new_status |= ((cmd->speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
- new_status |= ((cmd->speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
+ new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
+ new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
+ new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
@@ -3457,13 +3462,10 @@
.get_settings = velocity_get_settings,
.set_settings = velocity_set_settings,
.get_drvinfo = velocity_get_drvinfo,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
.get_wol = velocity_ethtool_get_wol,
.set_wol = velocity_ethtool_set_wol,
.get_msglevel = velocity_get_msglevel,
.set_msglevel = velocity_set_msglevel,
- .set_sg = ethtool_op_set_sg,
.get_link = velocity_get_link,
.get_coalesce = velocity_get_coalesce,
.set_coalesce = velocity_set_coalesce,
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 82dba5a..0cb0b06 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -710,17 +710,6 @@
return 0;
}
-static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct virtnet_info *vi = netdev_priv(dev);
- struct virtio_device *vdev = vi->vdev;
-
- if (data && !virtio_has_feature(vdev, VIRTIO_NET_F_CSUM))
- return -ENOSYS;
-
- return ethtool_op_set_tx_hw_csum(dev, data);
-}
-
static void virtnet_set_rx_mode(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -822,10 +811,6 @@
}
static const struct ethtool_ops virtnet_ethtool_ops = {
- .set_tx_csum = virtnet_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .set_tso = ethtool_op_set_tso,
- .set_ufo = ethtool_op_set_ufo,
.get_link = ethtool_op_get_link,
};
@@ -912,22 +897,29 @@
SET_NETDEV_DEV(dev, &vdev->dev);
/* Do we support "hardware" checksums? */
- if (csum && virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
/* This opens up the world of extra features. */
- dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
- if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
- dev->features |= NETIF_F_TSO | NETIF_F_UFO
+ dev->hw_features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
+ if (csum)
+ dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
+
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
+ dev->hw_features |= NETIF_F_TSO | NETIF_F_UFO
| NETIF_F_TSO_ECN | NETIF_F_TSO6;
}
/* Individual feature bits: what can host handle? */
- if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
- dev->features |= NETIF_F_TSO;
- if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
- dev->features |= NETIF_F_TSO6;
- if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
- dev->features |= NETIF_F_TSO_ECN;
- if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
- dev->features |= NETIF_F_UFO;
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
+ dev->hw_features |= NETIF_F_TSO;
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
+ dev->hw_features |= NETIF_F_TSO6;
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
+ dev->hw_features |= NETIF_F_TSO_ECN;
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
+ dev->hw_features |= NETIF_F_UFO;
+
+ if (gso)
+ dev->features |= dev->hw_features & (NETIF_F_ALL_TSO|NETIF_F_UFO);
+ /* (!csum && gso) case will be fixed by register_netdev() */
}
/* Configuration may specify what MAC to use. Otherwise random. */
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 0d47c3a..fa6e2ac 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -178,6 +178,7 @@
vmxnet3_process_events(struct vmxnet3_adapter *adapter)
{
int i;
+ unsigned long flags;
u32 events = le32_to_cpu(adapter->shared->ecr);
if (!events)
return;
@@ -190,10 +191,10 @@
/* Check if there is an error on xmit/recv queues */
if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) {
- spin_lock(&adapter->cmd_lock);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
VMXNET3_CMD_GET_QUEUE_STATUS);
- spin_unlock(&adapter->cmd_lock);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
for (i = 0; i < adapter->num_tx_queues; i++)
if (adapter->tqd_start[i].status.stopped)
@@ -1082,7 +1083,7 @@
struct sk_buff *skb,
union Vmxnet3_GenericDesc *gdesc)
{
- if (!gdesc->rcd.cnc && adapter->rxcsum) {
+ if (!gdesc->rcd.cnc && adapter->netdev->features & NETIF_F_RXCSUM) {
/* typical case: TCP/UDP over IP and both csums are correct */
if ((le32_to_cpu(gdesc->dword[3]) & VMXNET3_RCD_CSUM_OK) ==
VMXNET3_RCD_CSUM_OK) {
@@ -2081,10 +2082,10 @@
devRead->misc.ddLen = cpu_to_le32(sizeof(struct vmxnet3_adapter));
/* set up feature flags */
- if (adapter->rxcsum)
+ if (adapter->netdev->features & NETIF_F_RXCSUM)
devRead->misc.uptFeatures |= UPT1_F_RXCSUM;
- if (adapter->lro) {
+ if (adapter->netdev->features & NETIF_F_LRO) {
devRead->misc.uptFeatures |= UPT1_F_LRO;
devRead->misc.maxNumRxSG = cpu_to_le16(1 + MAX_SKB_FRAGS);
}
@@ -2593,9 +2594,6 @@
if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
return -EINVAL;
- if (new_mtu > 1500 && !adapter->jumbo_frame)
- return -EINVAL;
-
netdev->mtu = new_mtu;
/*
@@ -2641,28 +2639,18 @@
{
struct net_device *netdev = adapter->netdev;
- netdev->features = NETIF_F_SG |
- NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_LRO;
-
- printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro");
-
- adapter->rxcsum = true;
- adapter->jumbo_frame = true;
- adapter->lro = true;
-
- if (dma64) {
+ netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
+ NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_TX |
+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_LRO;
+ if (dma64)
netdev->features |= NETIF_F_HIGHDMA;
- printk(" highDMA");
- }
+ netdev->vlan_features = netdev->hw_features & ~NETIF_F_HW_VLAN_TX;
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
- netdev->vlan_features = netdev->features;
- printk("\n");
+ netdev_info(adapter->netdev,
+ "features: sg csum vlan jf tso tsoIPv6 lro%s\n",
+ dma64 ? " highDMA" : "");
}
@@ -2733,13 +2721,14 @@
vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
{
u32 cfg;
+ unsigned long flags;
/* intr settings */
- spin_lock(&adapter->cmd_lock);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
VMXNET3_CMD_GET_CONF_INTR);
cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
- spin_unlock(&adapter->cmd_lock);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
adapter->intr.type = cfg & 0x3;
adapter->intr.mask_mode = (cfg >> 2) & 0x3;
@@ -2874,6 +2863,7 @@
.ndo_start_xmit = vmxnet3_xmit_frame,
.ndo_set_mac_address = vmxnet3_set_mac_addr,
.ndo_change_mtu = vmxnet3_change_mtu,
+ .ndo_set_features = vmxnet3_set_features,
.ndo_get_stats = vmxnet3_get_stats,
.ndo_tx_timeout = vmxnet3_tx_timeout,
.ndo_set_multicast_list = vmxnet3_set_mc,
@@ -2894,6 +2884,9 @@
int num_tx_queues;
int num_rx_queues;
+ if (!pci_msi_enabled())
+ enable_mq = 0;
+
#ifdef VMXNET3_RSS
if (enable_mq)
num_rx_queues = min(VMXNET3_DEVICE_MAX_RX_QUEUES,
diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 51f2ef1..dc959fe 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -33,40 +33,6 @@
};
-static u32
-vmxnet3_get_rx_csum(struct net_device *netdev)
-{
- struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- return adapter->rxcsum;
-}
-
-
-static int
-vmxnet3_set_rx_csum(struct net_device *netdev, u32 val)
-{
- struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- unsigned long flags;
-
- if (adapter->rxcsum != val) {
- adapter->rxcsum = val;
- if (netif_running(netdev)) {
- if (val)
- adapter->shared->devRead.misc.uptFeatures |=
- UPT1_F_RXCSUM;
- else
- adapter->shared->devRead.misc.uptFeatures &=
- ~UPT1_F_RXCSUM;
-
- spin_lock_irqsave(&adapter->cmd_lock, flags);
- VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
- VMXNET3_CMD_UPDATE_FEATURE);
- spin_unlock_irqrestore(&adapter->cmd_lock, flags);
- }
- }
- return 0;
-}
-
-
/* per tq stats maintained by the device */
static const struct vmxnet3_stat_desc
vmxnet3_tq_dev_stats[] = {
@@ -296,28 +262,28 @@
}
}
-static int
-vmxnet3_set_flags(struct net_device *netdev, u32 data)
+int vmxnet3_set_features(struct net_device *netdev, u32 features)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1;
- u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1;
unsigned long flags;
+ u32 changed = features ^ netdev->features;
- if (ethtool_invalid_flags(netdev, data, ETH_FLAG_LRO))
- return -EINVAL;
-
- if (lro_requested ^ lro_present) {
- /* toggle the LRO feature*/
- netdev->features ^= NETIF_F_LRO;
+ if (changed & (NETIF_F_RXCSUM|NETIF_F_LRO)) {
+ if (features & NETIF_F_RXCSUM)
+ adapter->shared->devRead.misc.uptFeatures |=
+ UPT1_F_RXCSUM;
+ else
+ adapter->shared->devRead.misc.uptFeatures &=
+ ~UPT1_F_RXCSUM;
/* update harware LRO capability accordingly */
- if (lro_requested)
+ if (features & NETIF_F_LRO)
adapter->shared->devRead.misc.uptFeatures |=
UPT1_F_LRO;
else
adapter->shared->devRead.misc.uptFeatures &=
~UPT1_F_LRO;
+
spin_lock_irqsave(&adapter->cmd_lock, flags);
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
VMXNET3_CMD_UPDATE_FEATURE);
@@ -459,10 +425,10 @@
ecmd->transceiver = XCVR_INTERNAL;
if (adapter->link_speed) {
- ecmd->speed = adapter->link_speed;
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
ecmd->duplex = DUPLEX_FULL;
} else {
- ecmd->speed = -1;
+ ethtool_cmd_speed_set(ecmd, -1);
ecmd->duplex = -1;
}
return 0;
@@ -654,17 +620,7 @@
.get_wol = vmxnet3_get_wol,
.set_wol = vmxnet3_set_wol,
.get_link = ethtool_op_get_link,
- .get_rx_csum = vmxnet3_get_rx_csum,
- .set_rx_csum = vmxnet3_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ethtool_op_set_tso,
.get_strings = vmxnet3_get_strings,
- .get_flags = ethtool_op_get_flags,
- .set_flags = vmxnet3_set_flags,
.get_sset_count = vmxnet3_get_sset_count,
.get_ethtool_stats = vmxnet3_get_ethtool_stats,
.get_ringparam = vmxnet3_get_ringparam,
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index fb5d245..f50d36f 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -68,10 +68,10 @@
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.0.25.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01001900
+#define VMXNET3_DRIVER_VERSION_NUM 0x01010900
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
@@ -329,10 +329,6 @@
u8 __iomem *hw_addr0; /* for BAR 0 */
u8 __iomem *hw_addr1; /* for BAR 1 */
- /* feature control */
- bool rxcsum;
- bool lro;
- bool jumbo_frame;
#ifdef VMXNET3_RSS
struct UPT1_RSSConf *rss_conf;
bool rss;
@@ -404,6 +400,9 @@
vmxnet3_rq_destroy_all(struct vmxnet3_adapter *adapter);
int
+vmxnet3_set_features(struct net_device *netdev, u32 features);
+
+int
vmxnet3_create_queues(struct vmxnet3_adapter *adapter,
u32 tx_ring_size, u32 rx_ring_size, u32 rx_ring2_size);
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 401bebf..32763b2 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -159,16 +159,15 @@
u32 fw_memo, u32 offset, u64 *data0, u64 *data1,
u64 *steer_ctrl)
{
- struct vxge_hw_vpath_reg __iomem *vp_reg;
+ struct vxge_hw_vpath_reg __iomem *vp_reg = vpath->vp_reg;
enum vxge_hw_status status;
u64 val64;
- u32 retry = 0, max_retry = 100;
+ u32 retry = 0, max_retry = 3;
- vp_reg = vpath->vp_reg;
-
- if (vpath->vp_open) {
- max_retry = 3;
- spin_lock(&vpath->lock);
+ spin_lock(&vpath->lock);
+ if (!vpath->vp_open) {
+ spin_unlock(&vpath->lock);
+ max_retry = 100;
}
writeq(*data0, &vp_reg->rts_access_steer_data0);
@@ -1000,7 +999,7 @@
/**
* vxge_hw_device_hw_info_get - Get the hw information
* Returns the vpath mask that has the bits set for each vpath allocated
- * for the driver, FW version information and the first mac addresse for
+ * for the driver, FW version information, and the first mac address for
* each vpath
*/
enum vxge_hw_status __devinit
@@ -1064,9 +1063,10 @@
val64 = readq(&toc->toc_vpath_pointer[i]);
+ spin_lock_init(&vpath.lock);
vpath.vp_reg = (struct vxge_hw_vpath_reg __iomem *)
(bar0 + val64);
- vpath.vp_open = 0;
+ vpath.vp_open = VXGE_HW_VP_NOT_OPEN;
status = __vxge_hw_vpath_pci_func_mode_get(&vpath, hw_info);
if (status != VXGE_HW_OK)
@@ -1090,7 +1090,7 @@
val64 = readq(&toc->toc_vpath_pointer[i]);
vpath.vp_reg = (struct vxge_hw_vpath_reg __iomem *)
(bar0 + val64);
- vpath.vp_open = 0;
+ vpath.vp_open = VXGE_HW_VP_NOT_OPEN;
status = __vxge_hw_vpath_addr_get(&vpath,
hw_info->mac_addrs[i],
@@ -4646,7 +4646,27 @@
vpath->hldev->tim_int_mask1, vpath->vp_id);
hldev->stats.hw_dev_info_stats.vpath_info[vpath->vp_id] = NULL;
- memset(vpath, 0, sizeof(struct __vxge_hw_virtualpath));
+ /* If the whole struct __vxge_hw_virtualpath is zeroed, nothing will
+ * work after the interface is brought down.
+ */
+ spin_lock(&vpath->lock);
+ vpath->vp_open = VXGE_HW_VP_NOT_OPEN;
+ spin_unlock(&vpath->lock);
+
+ vpath->vpmgmt_reg = NULL;
+ vpath->nofl_db = NULL;
+ vpath->max_mtu = 0;
+ vpath->vsport_number = 0;
+ vpath->max_kdfc_db = 0;
+ vpath->max_nofl_db = 0;
+ vpath->ringh = NULL;
+ vpath->fifoh = NULL;
+ memset(&vpath->vpath_handles, 0, sizeof(struct list_head));
+ vpath->stats_block = 0;
+ vpath->hw_stats = NULL;
+ vpath->hw_stats_sav = NULL;
+ vpath->sw_stats = NULL;
+
exit:
return;
}
@@ -4670,7 +4690,7 @@
vpath = &hldev->virtual_paths[vp_id];
- spin_lock_init(&hldev->virtual_paths[vp_id].lock);
+ spin_lock_init(&vpath->lock);
vpath->vp_id = vp_id;
vpath->vp_open = VXGE_HW_VP_OPEN;
vpath->hldev = hldev;
@@ -5019,10 +5039,6 @@
__vxge_hw_vp_terminate(devh, vp_id);
- spin_lock(&vpath->lock);
- vpath->vp_open = VXGE_HW_VP_NOT_OPEN;
- spin_unlock(&vpath->lock);
-
vpath_close_exit:
return status;
}
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index 3c53aa7..359b9b9 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -412,44 +412,48 @@
* See also: struct vxge_hw_tim_intr_config{}.
*/
struct vxge_hw_device_config {
- u32 dma_blockpool_initial;
- u32 dma_blockpool_max;
-#define VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE 0
-#define VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE 0
-#define VXGE_HW_INCR_DMA_BLOCK_POOL_SIZE 4
-#define VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE 4096
+ u32 device_poll_millis;
+#define VXGE_HW_MIN_DEVICE_POLL_MILLIS 1
+#define VXGE_HW_MAX_DEVICE_POLL_MILLIS 100000
+#define VXGE_HW_DEF_DEVICE_POLL_MILLIS 1000
-#define VXGE_HW_MAX_PAYLOAD_SIZE_512 2
+ u32 dma_blockpool_initial;
+ u32 dma_blockpool_max;
+#define VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE 0
+#define VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE 0
+#define VXGE_HW_INCR_DMA_BLOCK_POOL_SIZE 4
+#define VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE 4096
- u32 intr_mode;
-#define VXGE_HW_INTR_MODE_IRQLINE 0
-#define VXGE_HW_INTR_MODE_MSIX 1
-#define VXGE_HW_INTR_MODE_MSIX_ONE_SHOT 2
+#define VXGE_HW_MAX_PAYLOAD_SIZE_512 2
-#define VXGE_HW_INTR_MODE_DEF 0
+ u32 intr_mode:2,
+#define VXGE_HW_INTR_MODE_IRQLINE 0
+#define VXGE_HW_INTR_MODE_MSIX 1
+#define VXGE_HW_INTR_MODE_MSIX_ONE_SHOT 2
- u32 rth_en;
-#define VXGE_HW_RTH_DISABLE 0
-#define VXGE_HW_RTH_ENABLE 1
-#define VXGE_HW_RTH_DEFAULT 0
+#define VXGE_HW_INTR_MODE_DEF 0
- u32 rth_it_type;
-#define VXGE_HW_RTH_IT_TYPE_SOLO_IT 0
-#define VXGE_HW_RTH_IT_TYPE_MULTI_IT 1
-#define VXGE_HW_RTH_IT_TYPE_DEFAULT 0
+ rth_en:1,
+#define VXGE_HW_RTH_DISABLE 0
+#define VXGE_HW_RTH_ENABLE 1
+#define VXGE_HW_RTH_DEFAULT 0
- u32 rts_mac_en;
+ rth_it_type:1,
+#define VXGE_HW_RTH_IT_TYPE_SOLO_IT 0
+#define VXGE_HW_RTH_IT_TYPE_MULTI_IT 1
+#define VXGE_HW_RTH_IT_TYPE_DEFAULT 0
+
+ rts_mac_en:1,
#define VXGE_HW_RTS_MAC_DISABLE 0
#define VXGE_HW_RTS_MAC_ENABLE 1
#define VXGE_HW_RTS_MAC_DEFAULT 0
- struct vxge_hw_vp_config vp_config[VXGE_HW_MAX_VIRTUAL_PATHS];
+ hwts_en:1;
+#define VXGE_HW_HWTS_DISABLE 0
+#define VXGE_HW_HWTS_ENABLE 1
+#define VXGE_HW_HWTS_DEFAULT 1
- u32 device_poll_millis;
-#define VXGE_HW_MIN_DEVICE_POLL_MILLIS 1
-#define VXGE_HW_MAX_DEVICE_POLL_MILLIS 100000
-#define VXGE_HW_DEF_DEVICE_POLL_MILLIS 1000
-
+ struct vxge_hw_vp_config vp_config[VXGE_HW_MAX_VIRTUAL_PATHS];
};
/**
diff --git a/drivers/net/vxge/vxge-ethtool.c b/drivers/net/vxge/vxge-ethtool.c
index c5eb034..92dd72d 100644
--- a/drivers/net/vxge/vxge-ethtool.c
+++ b/drivers/net/vxge/vxge-ethtool.c
@@ -33,7 +33,8 @@
{
/* We currently only support 10Gb/FULL */
if ((info->autoneg == AUTONEG_ENABLE) ||
- (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
+ (ethtool_cmd_speed(info) != SPEED_10000) ||
+ (info->duplex != DUPLEX_FULL))
return -EINVAL;
return 0;
@@ -58,10 +59,10 @@
info->transceiver = XCVR_EXTERNAL;
if (netif_carrier_ok(dev)) {
- info->speed = SPEED_10000;
+ ethtool_cmd_speed_set(info, SPEED_10000);
info->duplex = DUPLEX_FULL;
} else {
- info->speed = -1;
+ ethtool_cmd_speed_set(info, -1);
info->duplex = -1;
}
@@ -134,22 +135,29 @@
/**
* vxge_ethtool_idnic - To physically identify the nic on the system.
* @dev : device pointer.
- * @id : pointer to the structure with identification parameters given by
- * ethtool.
+ * @state : requested LED state
*
* Used to physically identify the NIC on the system.
- * The Link LED will blink for a time specified by the user.
- * Return value:
* 0 on success
*/
-static int vxge_ethtool_idnic(struct net_device *dev, u32 data)
+static int vxge_ethtool_idnic(struct net_device *dev,
+ enum ethtool_phys_id_state state)
{
struct vxgedev *vdev = netdev_priv(dev);
struct __vxge_hw_device *hldev = vdev->devh;
- vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_ON);
- msleep_interruptible(data ? (data * HZ) : VXGE_MAX_FLICKER_TIME);
- vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_OFF);
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_ON);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_OFF);
+ break;
+
+ default:
+ return -EINVAL;
+ }
return 0;
}
@@ -1064,35 +1072,6 @@
return sizeof(struct vxge_hw_vpath_reg) * vdev->no_of_vpath;
}
-static u32 vxge_get_rx_csum(struct net_device *dev)
-{
- struct vxgedev *vdev = netdev_priv(dev);
-
- return vdev->rx_csum;
-}
-
-static int vxge_set_rx_csum(struct net_device *dev, u32 data)
-{
- struct vxgedev *vdev = netdev_priv(dev);
-
- if (data)
- vdev->rx_csum = 1;
- else
- vdev->rx_csum = 0;
-
- return 0;
-}
-
-static int vxge_ethtool_op_set_tso(struct net_device *dev, u32 data)
-{
- if (data)
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
- else
- dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
- return 0;
-}
-
static int vxge_ethtool_get_sset_count(struct net_device *dev, int sset)
{
struct vxgedev *vdev = netdev_priv(dev);
@@ -1112,40 +1091,6 @@
}
}
-static int vxge_set_flags(struct net_device *dev, u32 data)
-{
- struct vxgedev *vdev = netdev_priv(dev);
- enum vxge_hw_status status;
-
- if (ethtool_invalid_flags(dev, data, ETH_FLAG_RXHASH))
- return -EINVAL;
-
- if (!!(data & ETH_FLAG_RXHASH) == vdev->devh->config.rth_en)
- return 0;
-
- if (netif_running(dev) || (vdev->config.rth_steering == NO_STEERING))
- return -EINVAL;
-
- vdev->devh->config.rth_en = !!(data & ETH_FLAG_RXHASH);
-
- /* Enabling RTH requires some of the logic in vxge_device_register and a
- * vpath reset. Due to these restrictions, only allow modification
- * while the interface is down.
- */
- status = vxge_reset_all_vpaths(vdev);
- if (status != VXGE_HW_OK) {
- vdev->devh->config.rth_en = !vdev->devh->config.rth_en;
- return -EFAULT;
- }
-
- if (vdev->devh->config.rth_en)
- dev->features |= NETIF_F_RXHASH;
- else
- dev->features &= ~NETIF_F_RXHASH;
-
- return 0;
-}
-
static int vxge_fw_flash(struct net_device *dev, struct ethtool_flash *parms)
{
struct vxgedev *vdev = netdev_priv(dev);
@@ -1174,19 +1119,10 @@
.get_link = ethtool_op_get_link,
.get_pauseparam = vxge_ethtool_getpause_data,
.set_pauseparam = vxge_ethtool_setpause_data,
- .get_rx_csum = vxge_get_rx_csum,
- .set_rx_csum = vxge_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = vxge_ethtool_op_set_tso,
.get_strings = vxge_ethtool_get_strings,
- .phys_id = vxge_ethtool_idnic,
+ .set_phys_id = vxge_ethtool_idnic,
.get_sset_count = vxge_ethtool_get_sset_count,
.get_ethtool_stats = vxge_get_ethtool_stats,
- .set_flags = vxge_set_flags,
.flash_device = vxge_fw_flash,
};
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index aff68c1..fc837cf 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -304,22 +304,14 @@
"%s: %s:%d skb protocol = %d",
ring->ndev->name, __func__, __LINE__, skb->protocol);
- if (ring->gro_enable) {
- if (ring->vlgrp && ext_info->vlan &&
- (ring->vlan_tag_strip ==
- VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
- vlan_gro_receive(ring->napi_p, ring->vlgrp,
- ext_info->vlan, skb);
- else
- napi_gro_receive(ring->napi_p, skb);
- } else {
- if (ring->vlgrp && vlan &&
- (ring->vlan_tag_strip ==
- VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
- vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan);
- else
- netif_receive_skb(skb);
- }
+ if (ring->vlgrp && ext_info->vlan &&
+ (ring->vlan_tag_strip ==
+ VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
+ vlan_gro_receive(ring->napi_p, ring->vlgrp,
+ ext_info->vlan, skb);
+ else
+ napi_gro_receive(ring->napi_p, skb);
+
vxge_debug_entryexit(VXGE_TRACE,
"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
}
@@ -490,7 +482,7 @@
if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) &&
!(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) &&
- ring->rx_csum && /* Offload Rx side CSUM */
+ (dev->features & NETIF_F_RXCSUM) && /* Offload Rx side CSUM */
ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK &&
ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK)
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2094,11 +2086,9 @@
vdev->config.fifo_indicate_max_pkts;
vpath->fifo.tx_vector_no = 0;
vpath->ring.rx_vector_no = 0;
- vpath->ring.rx_csum = vdev->rx_csum;
vpath->ring.rx_hwts = vdev->rx_hwts;
vpath->is_open = 1;
vdev->vp_handles[i] = vpath->handle;
- vpath->ring.gro_enable = vdev->config.gro_enable;
vpath->ring.vlan_tag_strip = vdev->vlan_tag_strip;
vdev->stats.vpaths_open++;
} else {
@@ -2670,6 +2660,40 @@
mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000);
}
+static u32 vxge_fix_features(struct net_device *dev, u32 features)
+{
+ u32 changed = dev->features ^ features;
+
+ /* Enabling RTH requires some of the logic in vxge_device_register and a
+ * vpath reset. Due to these restrictions, only allow modification
+ * while the interface is down.
+ */
+ if ((changed & NETIF_F_RXHASH) && netif_running(dev))
+ features ^= NETIF_F_RXHASH;
+
+ return features;
+}
+
+static int vxge_set_features(struct net_device *dev, u32 features)
+{
+ struct vxgedev *vdev = netdev_priv(dev);
+ u32 changed = dev->features ^ features;
+
+ if (!(changed & NETIF_F_RXHASH))
+ return 0;
+
+ /* !netif_running() ensured by vxge_fix_features() */
+
+ vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH);
+ if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) {
+ dev->features = features ^ NETIF_F_RXHASH;
+ vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH);
+ return -EIO;
+ }
+
+ return 0;
+}
+
/**
* vxge_open
* @dev: pointer to the device structure.
@@ -3112,8 +3136,7 @@
return net_stats;
}
-static enum vxge_hw_status vxge_timestamp_config(struct vxgedev *vdev,
- int enable)
+static enum vxge_hw_status vxge_timestamp_config(struct __vxge_hw_device *devh)
{
enum vxge_hw_status status;
u64 val64;
@@ -3123,27 +3146,24 @@
* required for the driver to load (due to a hardware bug),
* there is no need to do anything special here.
*/
- if (enable)
- val64 = VXGE_HW_XMAC_TIMESTAMP_EN |
- VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
- VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
- else
- val64 = 0;
+ val64 = VXGE_HW_XMAC_TIMESTAMP_EN |
+ VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
+ VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
- status = vxge_hw_mgmt_reg_write(vdev->devh,
+ status = vxge_hw_mgmt_reg_write(devh,
vxge_hw_mgmt_reg_type_mrpcim,
0,
offsetof(struct vxge_hw_mrpcim_reg,
xmac_timestamp),
val64);
- vxge_hw_device_flush_io(vdev->devh);
+ vxge_hw_device_flush_io(devh);
+ devh->config.hwts_en = VXGE_HW_HWTS_ENABLE;
return status;
}
static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
{
struct hwtstamp_config config;
- enum vxge_hw_status status;
int i;
if (copy_from_user(&config, data, sizeof(config)))
@@ -3164,10 +3184,6 @@
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
- status = vxge_timestamp_config(vdev, 0);
- if (status != VXGE_HW_OK)
- return -EFAULT;
-
vdev->rx_hwts = 0;
config.rx_filter = HWTSTAMP_FILTER_NONE;
break;
@@ -3186,8 +3202,7 @@
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
- status = vxge_timestamp_config(vdev, 1);
- if (status != VXGE_HW_OK)
+ if (vdev->devh->config.hwts_en != VXGE_HW_HWTS_ENABLE)
return -EFAULT;
vdev->rx_hwts = 1;
@@ -3378,6 +3393,8 @@
.ndo_do_ioctl = vxge_ioctl,
.ndo_set_mac_address = vxge_set_mac_addr,
.ndo_change_mtu = vxge_change_mtu,
+ .ndo_fix_features = vxge_fix_features,
+ .ndo_set_features = vxge_set_features,
.ndo_vlan_rx_register = vxge_vlan_rx_register,
.ndo_vlan_rx_kill_vid = vxge_vlan_rx_kill_vid,
.ndo_vlan_rx_add_vid = vxge_vlan_rx_add_vid,
@@ -3424,14 +3441,21 @@
vdev->devh = hldev;
vdev->pdev = hldev->pdev;
memcpy(&vdev->config, config, sizeof(struct vxge_config));
- vdev->rx_csum = 1; /* Enable Rx CSUM by default. */
vdev->rx_hwts = 0;
vdev->titan1 = (vdev->pdev->revision == VXGE_HW_TITAN1_PCI_REVISION);
SET_NETDEV_DEV(ndev, &vdev->pdev->dev);
- ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
+ ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_HW_VLAN_TX;
+ if (vdev->config.rth_steering != NO_STEERING)
+ ndev->hw_features |= NETIF_F_RXHASH;
+
+ ndev->features |= ndev->hw_features |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
+
/* Driver entry points */
ndev->irq = vdev->pdev->irq;
ndev->base_addr = (unsigned long) hldev->bar0;
@@ -3443,11 +3467,6 @@
vxge_initialize_ethtool_ops(ndev);
- if (vdev->config.rth_steering != NO_STEERING) {
- ndev->features |= NETIF_F_RXHASH;
- hldev->config.rth_en = VXGE_HW_RTH_ENABLE;
- }
-
/* Allocate memory for vpath */
vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) *
no_of_vpath, GFP_KERNEL);
@@ -3459,9 +3478,6 @@
goto _out1;
}
- ndev->features |= NETIF_F_SG;
-
- ndev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
"%s : checksuming enabled", __func__);
@@ -3471,11 +3487,6 @@
"%s : using High DMA", __func__);
}
- ndev->features |= NETIF_F_TSO | NETIF_F_TSO6;
-
- if (vdev->config.gro_enable)
- ndev->features |= NETIF_F_GRO;
-
ret = register_netdev(ndev);
if (ret) {
vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
@@ -4005,15 +4016,6 @@
vdev->config.tx_steering_type = 0;
}
- if (vdev->config.gro_enable) {
- vxge_debug_init(VXGE_ERR,
- "%s: Generic receive offload enabled",
- vdev->ndev->name);
- } else
- vxge_debug_init(VXGE_TRACE,
- "%s: Generic receive offload disabled",
- vdev->ndev->name);
-
if (vdev->config.addr_learn_en)
vxge_debug_init(VXGE_TRACE,
"%s: MAC Address learning enabled", vdev->ndev->name);
@@ -4575,12 +4577,29 @@
goto _exit4;
}
+ /* Always enable HWTS. This will always cause the FCS to be invalid,
+ * due to the fact that HWTS is using the FCS as the location of the
+ * timestamp. The HW FCS checking will still correctly determine if
+ * there is a valid checksum, and the FCS is being removed by the driver
+ * anyway. So no fucntionality is being lost. Since it is always
+ * enabled, we now simply use the ioctl call to set whether or not the
+ * driver should be paying attention to the HWTS.
+ */
+ if (is_privileged == VXGE_HW_OK) {
+ status = vxge_timestamp_config(hldev);
+ if (status != VXGE_HW_OK) {
+ vxge_debug_init(VXGE_ERR, "%s: HWTS enable failed",
+ VXGE_DRIVER_NAME);
+ ret = -EFAULT;
+ goto _exit4;
+ }
+ }
+
vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
/* set private device info */
pci_set_drvdata(pdev, hldev);
- ll_config->gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
ll_config->addr_learn_en = addr_learn_en;
ll_config->rth_algorithm = RTH_ALG_JENKINS;
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/vxge/vxge-main.h
index 40474f0..ed120ab 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/vxge/vxge-main.h
@@ -168,9 +168,6 @@
#define NEW_NAPI_WEIGHT 64
int napi_weight;
-#define VXGE_GRO_DONOT_AGGREGATE 0
-#define VXGE_GRO_ALWAYS_AGGREGATE 1
- int gro_enable;
int intr_type;
#define INTA 0
#define MSI 1
@@ -290,13 +287,11 @@
unsigned long interrupt_count;
unsigned long jiffies;
- /* copy of the flag indicating whether rx_csum is to be used */
- u32 rx_csum:1,
- rx_hwts:1;
+ /* copy of the flag indicating whether rx_hwts is to be used */
+ u32 rx_hwts:1;
int pkts_processed;
int budget;
- int gro_enable;
struct napi_struct napi;
struct napi_struct *napi_p;
@@ -369,9 +364,8 @@
*/
u16 all_multi_flg;
- /* A flag indicating whether rx_csum is to be used or not. */
- u32 rx_csum:1,
- rx_hwts:1,
+ /* A flag indicating whether rx_hwts is to be used or not. */
+ u32 rx_hwts:1,
titan1:1;
struct vxge_msix_entry *vxge_entries;
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 6c2fc0b..4a518a3 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -240,7 +240,7 @@
u32 btimer_val;
#define VXGE_HW_MIN_TIM_BTIMER_VAL 0
#define VXGE_HW_MAX_TIM_BTIMER_VAL 67108864
-#define VXGE_HW_USE_FLASH_DEFAULT 0xffffffff
+#define VXGE_HW_USE_FLASH_DEFAULT (~0)
u32 timer_ac_en;
#define VXGE_HW_TIM_TIMER_AC_ENABLE 1
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index 581e215..b9efa28b 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -16,8 +16,8 @@
#define VXGE_VERSION_MAJOR "2"
#define VXGE_VERSION_MINOR "5"
-#define VXGE_VERSION_FIX "2"
-#define VXGE_VERSION_BUILD "22259"
+#define VXGE_VERSION_FIX "3"
+#define VXGE_VERSION_BUILD "22640"
#define VXGE_VERSION_FOR "k"
#define VXGE_FW_VER(maj, min, bld) (((maj) << 16) + ((min) << 8) + (bld))
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 1481a44..21b104d 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -341,10 +341,6 @@
}
}
- err = dev_alloc_name(master, master->name);
- if (err < 0)
- goto err2;
-
*(short *)(master->dev_addr) = dlci->dlci;
dlp = netdev_priv(master);
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 0edb535..fc433f2 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1070,7 +1070,7 @@
hdlc_device *hdlc = dev_to_hdlc(frad);
pvc_device *pvc;
struct net_device *dev;
- int result, used;
+ int used;
if ((pvc = add_pvc(frad, dlci)) == NULL) {
printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",
@@ -1106,13 +1106,6 @@
dev->tx_queue_len = 0;
dev->ml_priv = pvc;
- result = dev_alloc_name(dev, dev->name);
- if (result < 0) {
- free_netdev(dev);
- delete_unused_pvcs(hdlc);
- return result;
- }
-
if (register_netdevice(dev) != 0) {
free_netdev(dev);
delete_unused_pvcs(hdlc);
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 7f5bb91..eec463f 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -338,10 +338,6 @@
dev_hold(dev);
lapbeth->ethdev = dev;
- rc = dev_alloc_name(ndev, ndev->name);
- if (rc < 0)
- goto fail;
-
rc = -EIO;
if (register_netdevice(ndev))
goto fail;
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 7aeb113..f354bd4 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -284,5 +284,6 @@
source "drivers/net/wireless/wl1251/Kconfig"
source "drivers/net/wireless/wl12xx/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
+source "drivers/net/wireless/mwifiex/Kconfig"
endif # WLAN
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index ddd3fb6..7bba6a8 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -56,3 +56,5 @@
obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx/
obj-$(CONFIG_IWM) += iwmc3200wifi/
+
+obj-$(CONFIG_MWIFIEX) += mwifiex/
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 92c2162..d1b2306 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -24,7 +24,6 @@
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
-source "drivers/net/wireless/ath/ar9170/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index 6d711ec..0e8f528 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -1,6 +1,5 @@
obj-$(CONFIG_ATH5K) += ath5k/
obj-$(CONFIG_ATH9K_HW) += ath9k/
-obj-$(CONFIG_AR9170_USB) += ar9170/
obj-$(CONFIG_CARL9170) += carl9170/
obj-$(CONFIG_ATH_COMMON) += ath.o
diff --git a/drivers/net/wireless/ath/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig
deleted file mode 100644
index 7b9672b..0000000
--- a/drivers/net/wireless/ath/ar9170/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-config AR9170_USB
- tristate "Atheros AR9170 802.11n USB support (OBSOLETE)"
- depends on USB && MAC80211
- select FW_LOADER
- help
- This driver is going to get replaced by carl9170.
-
- This is a driver for the Atheros "otus" 802.11n USB devices.
-
- These devices require additional firmware (2 files).
- For now, these files can be downloaded from here:
-
- http://wireless.kernel.org/en/users/Drivers/ar9170
-
- If you choose to build a module, it'll be called ar9170usb.
-
-config AR9170_LEDS
- bool
- depends on AR9170_USB && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_USB)
- default y
diff --git a/drivers/net/wireless/ath/ar9170/Makefile b/drivers/net/wireless/ath/ar9170/Makefile
deleted file mode 100644
index 8d91c7e..0000000
--- a/drivers/net/wireless/ath/ar9170/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-ar9170usb-objs := usb.o main.o cmd.o mac.o phy.o led.o
-
-obj-$(CONFIG_AR9170_USB) += ar9170usb.o
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
deleted file mode 100644
index 371e4ce..0000000
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * Driver specific definitions
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __AR9170_H
-#define __AR9170_H
-
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-#include <net/cfg80211.h>
-#include <net/mac80211.h>
-#ifdef CONFIG_AR9170_LEDS
-#include <linux/leds.h>
-#endif /* CONFIG_AR9170_LEDS */
-#include "eeprom.h"
-#include "hw.h"
-
-#include "../regd.h"
-
-#define PAYLOAD_MAX (AR9170_MAX_CMD_LEN/4 - 1)
-
-enum ar9170_bw {
- AR9170_BW_20,
- AR9170_BW_40_BELOW,
- AR9170_BW_40_ABOVE,
-
- __AR9170_NUM_BW,
-};
-
-static inline enum ar9170_bw nl80211_to_ar9170(enum nl80211_channel_type type)
-{
- switch (type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
- return AR9170_BW_20;
- case NL80211_CHAN_HT40MINUS:
- return AR9170_BW_40_BELOW;
- case NL80211_CHAN_HT40PLUS:
- return AR9170_BW_40_ABOVE;
- default:
- BUG();
- }
-}
-
-enum ar9170_rf_init_mode {
- AR9170_RFI_NONE,
- AR9170_RFI_WARM,
- AR9170_RFI_COLD,
-};
-
-#define AR9170_MAX_RX_BUFFER_SIZE 8192
-
-#ifdef CONFIG_AR9170_LEDS
-struct ar9170;
-
-struct ar9170_led {
- struct ar9170 *ar;
- struct led_classdev l;
- char name[32];
- unsigned int toggled;
- bool last_state;
- bool registered;
-};
-
-#endif /* CONFIG_AR9170_LEDS */
-
-enum ar9170_device_state {
- AR9170_UNKNOWN_STATE,
- AR9170_STOPPED,
- AR9170_IDLE,
- AR9170_STARTED,
-};
-
-struct ar9170_rxstream_mpdu_merge {
- struct ar9170_rx_head plcp;
- bool has_plcp;
-};
-
-struct ar9170_tx_queue_stats {
- unsigned int len;
- unsigned int limit;
- unsigned int count;
-};
-
-#define AR9170_QUEUE_TIMEOUT 64
-#define AR9170_TX_TIMEOUT 8
-#define AR9170_JANITOR_DELAY 128
-#define AR9170_TX_INVALID_RATE 0xffffffff
-
-#define AR9170_NUM_TX_LIMIT_HARD AR9170_TXQ_DEPTH
-#define AR9170_NUM_TX_LIMIT_SOFT (AR9170_TXQ_DEPTH - 10)
-
-struct ar9170 {
- struct ieee80211_hw *hw;
- struct ath_common common;
- struct mutex mutex;
- enum ar9170_device_state state;
- bool registered;
- unsigned long bad_hw_nagger;
-
- int (*open)(struct ar9170 *);
- void (*stop)(struct ar9170 *);
- int (*tx)(struct ar9170 *, struct sk_buff *);
- int (*exec_cmd)(struct ar9170 *, enum ar9170_cmd, u32 ,
- void *, u32 , void *);
- void (*callback_cmd)(struct ar9170 *, u32 , void *);
- int (*flush)(struct ar9170 *);
-
- /* interface mode settings */
- struct ieee80211_vif *vif;
-
- /* beaconing */
- struct sk_buff *beacon;
- struct work_struct beacon_work;
- bool enable_beacon;
-
- /* cryptographic engine */
- u64 usedkeys;
- bool rx_software_decryption;
- bool disable_offload;
-
- /* filter settings */
- u64 cur_mc_hash;
- u32 cur_filter;
- unsigned int filter_state;
- bool sniffer_enabled;
-
- /* PHY */
- struct ieee80211_channel *channel;
- int noise[4];
-
- /* power calibration data */
- u8 power_5G_leg[4];
- u8 power_2G_cck[4];
- u8 power_2G_ofdm[4];
- u8 power_5G_ht20[8];
- u8 power_5G_ht40[8];
- u8 power_2G_ht20[8];
- u8 power_2G_ht40[8];
-
- u8 phy_heavy_clip;
-
-#ifdef CONFIG_AR9170_LEDS
- struct delayed_work led_work;
- struct ar9170_led leds[AR9170_NUM_LEDS];
-#endif /* CONFIG_AR9170_LEDS */
-
- /* qos queue settings */
- spinlock_t tx_stats_lock;
- struct ar9170_tx_queue_stats tx_stats[5];
- struct ieee80211_tx_queue_params edcf[5];
-
- spinlock_t cmdlock;
- __le32 cmdbuf[PAYLOAD_MAX + 1];
-
- /* MAC statistics */
- struct ieee80211_low_level_stats stats;
-
- /* EEPROM */
- struct ar9170_eeprom eeprom;
-
- /* tx queues - as seen by hw - */
- struct sk_buff_head tx_pending[__AR9170_NUM_TXQ];
- struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
- struct delayed_work tx_janitor;
-
- /* rxstream mpdu merge */
- struct ar9170_rxstream_mpdu_merge rx_mpdu;
- struct sk_buff *rx_failover;
- int rx_failover_missing;
-
- /* (cached) HW A-MPDU settings */
- u8 global_ampdu_density;
- u8 global_ampdu_factor;
-};
-
-struct ar9170_tx_info {
- unsigned long timeout;
-};
-
-#define IS_STARTED(a) (((struct ar9170 *)a)->state >= AR9170_STARTED)
-#define IS_ACCEPTING_CMD(a) (((struct ar9170 *)a)->state >= AR9170_IDLE)
-
-/* exported interface */
-void *ar9170_alloc(size_t priv_size);
-int ar9170_register(struct ar9170 *ar, struct device *pdev);
-void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb);
-void ar9170_unregister(struct ar9170 *ar);
-void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb);
-void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len);
-int ar9170_nag_limiter(struct ar9170 *ar);
-
-/* MAC */
-void ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-int ar9170_init_mac(struct ar9170 *ar);
-int ar9170_set_qos(struct ar9170 *ar);
-int ar9170_update_multicast(struct ar9170 *ar, const u64 mc_hast);
-int ar9170_update_frame_filter(struct ar9170 *ar, const u32 filter);
-int ar9170_set_operating_mode(struct ar9170 *ar);
-int ar9170_set_beacon_timers(struct ar9170 *ar);
-int ar9170_set_dyn_sifs_ack(struct ar9170 *ar);
-int ar9170_set_slot_time(struct ar9170 *ar);
-int ar9170_set_basic_rates(struct ar9170 *ar);
-int ar9170_set_hwretry_limit(struct ar9170 *ar, u32 max_retry);
-int ar9170_update_beacon(struct ar9170 *ar);
-void ar9170_new_beacon(struct work_struct *work);
-int ar9170_upload_key(struct ar9170 *ar, u8 id, const u8 *mac, u8 ktype,
- u8 keyidx, u8 *keydata, int keylen);
-int ar9170_disable_key(struct ar9170 *ar, u8 id);
-
-/* LEDs */
-#ifdef CONFIG_AR9170_LEDS
-int ar9170_register_leds(struct ar9170 *ar);
-void ar9170_unregister_leds(struct ar9170 *ar);
-#endif /* CONFIG_AR9170_LEDS */
-int ar9170_init_leds(struct ar9170 *ar);
-int ar9170_set_leds_state(struct ar9170 *ar, u32 led_state);
-
-/* PHY / RF */
-int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band);
-int ar9170_init_rf(struct ar9170 *ar);
-int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
- enum ar9170_rf_init_mode rfi, enum ar9170_bw bw);
-
-#endif /* __AR9170_H */
diff --git a/drivers/net/wireless/ath/ar9170/cmd.c b/drivers/net/wireless/ath/ar9170/cmd.c
deleted file mode 100644
index 6452c50..0000000
--- a/drivers/net/wireless/ath/ar9170/cmd.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * Basic HW register/memory/command access functions
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ar9170.h"
-#include "cmd.h"
-
-int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len)
-{
- int err;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return 0;
-
- err = ar->exec_cmd(ar, AR9170_CMD_WMEM, len, (u8 *) data, 0, NULL);
- if (err)
- wiphy_debug(ar->hw->wiphy, "writing memory failed\n");
- return err;
-}
-
-int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val)
-{
- const __le32 buf[2] = {
- cpu_to_le32(reg),
- cpu_to_le32(val),
- };
- int err;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return 0;
-
- err = ar->exec_cmd(ar, AR9170_CMD_WREG, sizeof(buf),
- (u8 *) buf, 0, NULL);
- if (err)
- wiphy_debug(ar->hw->wiphy, "writing reg %#x (val %#x) failed\n",
- reg, val);
- return err;
-}
-
-int ar9170_read_mreg(struct ar9170 *ar, int nregs, const u32 *regs, u32 *out)
-{
- int i, err;
- __le32 *offs, *res;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return 0;
-
- /* abuse "out" for the register offsets, must be same length */
- offs = (__le32 *)out;
- for (i = 0; i < nregs; i++)
- offs[i] = cpu_to_le32(regs[i]);
-
- /* also use the same buffer for the input */
- res = (__le32 *)out;
-
- err = ar->exec_cmd(ar, AR9170_CMD_RREG,
- 4 * nregs, (u8 *)offs,
- 4 * nregs, (u8 *)res);
- if (err)
- return err;
-
- /* convert result to cpu endian */
- for (i = 0; i < nregs; i++)
- out[i] = le32_to_cpu(res[i]);
-
- return 0;
-}
-
-int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val)
-{
- return ar9170_read_mreg(ar, 1, ®, val);
-}
-
-int ar9170_echo_test(struct ar9170 *ar, u32 v)
-{
- __le32 echobuf = cpu_to_le32(v);
- __le32 echores;
- int err;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return -ENODEV;
-
- err = ar->exec_cmd(ar, AR9170_CMD_ECHO,
- 4, (u8 *)&echobuf,
- 4, (u8 *)&echores);
- if (err)
- return err;
-
- if (echobuf != echores)
- return -EINVAL;
-
- return 0;
-}
diff --git a/drivers/net/wireless/ath/ar9170/cmd.h b/drivers/net/wireless/ath/ar9170/cmd.h
deleted file mode 100644
index ec8134b4..0000000
--- a/drivers/net/wireless/ath/ar9170/cmd.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * Basic HW register/memory/command access functions
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __CMD_H
-#define __CMD_H
-
-#include "ar9170.h"
-
-/* basic HW access */
-int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len);
-int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val);
-int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val);
-int ar9170_read_mreg(struct ar9170 *ar, int nregs, const u32 *regs, u32 *out);
-int ar9170_echo_test(struct ar9170 *ar, u32 v);
-
-/*
- * Macros to facilitate writing multiple registers in a single
- * write-combining USB command. Note that when the first group
- * fails the whole thing will fail without any others attempted,
- * but you won't know which write in the group failed.
- */
-#define ar9170_regwrite_begin(ar) \
-do { \
- int __nreg = 0, __err = 0; \
- struct ar9170 *__ar = ar;
-
-#define ar9170_regwrite(r, v) do { \
- __ar->cmdbuf[2 * __nreg + 1] = cpu_to_le32(r); \
- __ar->cmdbuf[2 * __nreg + 2] = cpu_to_le32(v); \
- __nreg++; \
- if ((__nreg >= PAYLOAD_MAX/2)) { \
- if (IS_ACCEPTING_CMD(__ar)) \
- __err = ar->exec_cmd(__ar, AR9170_CMD_WREG, \
- 8 * __nreg, \
- (u8 *) &__ar->cmdbuf[1], \
- 0, NULL); \
- __nreg = 0; \
- if (__err) \
- goto __regwrite_out; \
- } \
-} while (0)
-
-#define ar9170_regwrite_finish() \
-__regwrite_out : \
- if (__nreg) { \
- if (IS_ACCEPTING_CMD(__ar)) \
- __err = ar->exec_cmd(__ar, AR9170_CMD_WREG, \
- 8 * __nreg, \
- (u8 *) &__ar->cmdbuf[1], \
- 0, NULL); \
- __nreg = 0; \
- }
-
-#define ar9170_regwrite_result() \
- __err; \
-} while (0);
-
-#endif /* __CMD_H */
diff --git a/drivers/net/wireless/ath/ar9170/eeprom.h b/drivers/net/wireless/ath/ar9170/eeprom.h
deleted file mode 100644
index 6c46638..0000000
--- a/drivers/net/wireless/ath/ar9170/eeprom.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * EEPROM layout
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __AR9170_EEPROM_H
-#define __AR9170_EEPROM_H
-
-#define AR5416_MAX_CHAINS 2
-#define AR5416_MODAL_SPURS 5
-
-struct ar9170_eeprom_modal {
- __le32 antCtrlChain[AR5416_MAX_CHAINS];
- __le32 antCtrlCommon;
- s8 antennaGainCh[AR5416_MAX_CHAINS];
- u8 switchSettling;
- u8 txRxAttenCh[AR5416_MAX_CHAINS];
- u8 rxTxMarginCh[AR5416_MAX_CHAINS];
- s8 adcDesiredSize;
- s8 pgaDesiredSize;
- u8 xlnaGainCh[AR5416_MAX_CHAINS];
- u8 txEndToXpaOff;
- u8 txEndToRxOn;
- u8 txFrameToXpaOn;
- u8 thresh62;
- s8 noiseFloorThreshCh[AR5416_MAX_CHAINS];
- u8 xpdGain;
- u8 xpd;
- s8 iqCalICh[AR5416_MAX_CHAINS];
- s8 iqCalQCh[AR5416_MAX_CHAINS];
- u8 pdGainOverlap;
- u8 ob;
- u8 db;
- u8 xpaBiasLvl;
- u8 pwrDecreaseFor2Chain;
- u8 pwrDecreaseFor3Chain;
- u8 txFrameToDataStart;
- u8 txFrameToPaOn;
- u8 ht40PowerIncForPdadc;
- u8 bswAtten[AR5416_MAX_CHAINS];
- u8 bswMargin[AR5416_MAX_CHAINS];
- u8 swSettleHt40;
- u8 reserved[22];
- struct spur_channel {
- __le16 spurChan;
- u8 spurRangeLow;
- u8 spurRangeHigh;
- } __packed spur_channels[AR5416_MODAL_SPURS];
-} __packed;
-
-#define AR5416_NUM_PD_GAINS 4
-#define AR5416_PD_GAIN_ICEPTS 5
-
-struct ar9170_calibration_data_per_freq {
- u8 pwr_pdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
- u8 vpd_pdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
-} __packed;
-
-#define AR5416_NUM_5G_CAL_PIERS 8
-#define AR5416_NUM_2G_CAL_PIERS 4
-
-#define AR5416_NUM_5G_TARGET_PWRS 8
-#define AR5416_NUM_2G_CCK_TARGET_PWRS 3
-#define AR5416_NUM_2G_OFDM_TARGET_PWRS 4
-#define AR5416_MAX_NUM_TGT_PWRS 8
-
-struct ar9170_calibration_target_power_legacy {
- u8 freq;
- u8 power[4];
-} __packed;
-
-struct ar9170_calibration_target_power_ht {
- u8 freq;
- u8 power[8];
-} __packed;
-
-#define AR5416_NUM_CTLS 24
-
-struct ar9170_calctl_edges {
- u8 channel;
-#define AR9170_CALCTL_EDGE_FLAGS 0xC0
- u8 power_flags;
-} __packed;
-
-#define AR5416_NUM_BAND_EDGES 8
-
-struct ar9170_calctl_data {
- struct ar9170_calctl_edges
- control_edges[AR5416_MAX_CHAINS][AR5416_NUM_BAND_EDGES];
-} __packed;
-
-
-struct ar9170_eeprom {
- __le16 length;
- __le16 checksum;
- __le16 version;
- u8 operating_flags;
-#define AR9170_OPFLAG_5GHZ 1
-#define AR9170_OPFLAG_2GHZ 2
- u8 misc;
- __le16 reg_domain[2];
- u8 mac_address[6];
- u8 rx_mask;
- u8 tx_mask;
- __le16 rf_silent;
- __le16 bluetooth_options;
- __le16 device_capabilities;
- __le32 build_number;
- u8 deviceType;
- u8 reserved[33];
-
- u8 customer_data[64];
-
- struct ar9170_eeprom_modal
- modal_header[2];
-
- u8 cal_freq_pier_5G[AR5416_NUM_5G_CAL_PIERS];
- u8 cal_freq_pier_2G[AR5416_NUM_2G_CAL_PIERS];
-
- struct ar9170_calibration_data_per_freq
- cal_pier_data_5G[AR5416_MAX_CHAINS][AR5416_NUM_5G_CAL_PIERS],
- cal_pier_data_2G[AR5416_MAX_CHAINS][AR5416_NUM_2G_CAL_PIERS];
-
- /* power calibration data */
- struct ar9170_calibration_target_power_legacy
- cal_tgt_pwr_5G[AR5416_NUM_5G_TARGET_PWRS];
- struct ar9170_calibration_target_power_ht
- cal_tgt_pwr_5G_ht20[AR5416_NUM_5G_TARGET_PWRS],
- cal_tgt_pwr_5G_ht40[AR5416_NUM_5G_TARGET_PWRS];
-
- struct ar9170_calibration_target_power_legacy
- cal_tgt_pwr_2G_cck[AR5416_NUM_2G_CCK_TARGET_PWRS],
- cal_tgt_pwr_2G_ofdm[AR5416_NUM_2G_OFDM_TARGET_PWRS];
- struct ar9170_calibration_target_power_ht
- cal_tgt_pwr_2G_ht20[AR5416_NUM_2G_OFDM_TARGET_PWRS],
- cal_tgt_pwr_2G_ht40[AR5416_NUM_2G_OFDM_TARGET_PWRS];
-
- /* conformance testing limits */
- u8 ctl_index[AR5416_NUM_CTLS];
- struct ar9170_calctl_data
- ctl_data[AR5416_NUM_CTLS];
-
- u8 pad;
- __le16 subsystem_id;
-} __packed;
-
-#endif /* __AR9170_EEPROM_H */
diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
deleted file mode 100644
index 06f1f3c..0000000
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * Hardware-specific definitions
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __AR9170_HW_H
-#define __AR9170_HW_H
-
-#define AR9170_MAX_CMD_LEN 64
-
-enum ar9170_cmd {
- AR9170_CMD_RREG = 0x00,
- AR9170_CMD_WREG = 0x01,
- AR9170_CMD_RMEM = 0x02,
- AR9170_CMD_WMEM = 0x03,
- AR9170_CMD_BITAND = 0x04,
- AR9170_CMD_BITOR = 0x05,
- AR9170_CMD_EKEY = 0x28,
- AR9170_CMD_DKEY = 0x29,
- AR9170_CMD_FREQUENCY = 0x30,
- AR9170_CMD_RF_INIT = 0x31,
- AR9170_CMD_SYNTH = 0x32,
- AR9170_CMD_FREQ_START = 0x33,
- AR9170_CMD_ECHO = 0x80,
- AR9170_CMD_TALLY = 0x81,
- AR9170_CMD_TALLY_APD = 0x82,
- AR9170_CMD_CONFIG = 0x83,
- AR9170_CMD_RESET = 0x90,
- AR9170_CMD_DKRESET = 0x91,
- AR9170_CMD_DKTX_STATUS = 0x92,
- AR9170_CMD_FDC = 0xA0,
- AR9170_CMD_WREEPROM = 0xB0,
- AR9170_CMD_WFLASH = 0xB0,
- AR9170_CMD_FLASH_ERASE = 0xB1,
- AR9170_CMD_FLASH_PROG = 0xB2,
- AR9170_CMD_FLASH_CHKSUM = 0xB3,
- AR9170_CMD_FLASH_READ = 0xB4,
- AR9170_CMD_FW_DL_INIT = 0xB5,
- AR9170_CMD_MEM_WREEPROM = 0xBB,
-};
-
-/* endpoints */
-#define AR9170_EP_TX 1
-#define AR9170_EP_RX 2
-#define AR9170_EP_IRQ 3
-#define AR9170_EP_CMD 4
-
-#define AR9170_EEPROM_START 0x1600
-
-#define AR9170_GPIO_REG_BASE 0x1d0100
-#define AR9170_GPIO_REG_PORT_TYPE AR9170_GPIO_REG_BASE
-#define AR9170_GPIO_REG_DATA (AR9170_GPIO_REG_BASE + 4)
-#define AR9170_NUM_LEDS 2
-
-
-#define AR9170_USB_REG_BASE 0x1e1000
-#define AR9170_USB_REG_DMA_CTL (AR9170_USB_REG_BASE + 0x108)
-#define AR9170_DMA_CTL_ENABLE_TO_DEVICE 0x1
-#define AR9170_DMA_CTL_ENABLE_FROM_DEVICE 0x2
-#define AR9170_DMA_CTL_HIGH_SPEED 0x4
-#define AR9170_DMA_CTL_PACKET_MODE 0x8
-
-#define AR9170_USB_REG_MAX_AGG_UPLOAD (AR9170_USB_REG_BASE + 0x110)
-#define AR9170_USB_REG_UPLOAD_TIME_CTL (AR9170_USB_REG_BASE + 0x114)
-
-
-
-#define AR9170_MAC_REG_BASE 0x1c3000
-
-#define AR9170_MAC_REG_TSF_L (AR9170_MAC_REG_BASE + 0x514)
-#define AR9170_MAC_REG_TSF_H (AR9170_MAC_REG_BASE + 0x518)
-
-#define AR9170_MAC_REG_ATIM_WINDOW (AR9170_MAC_REG_BASE + 0x51C)
-#define AR9170_MAC_REG_BCN_PERIOD (AR9170_MAC_REG_BASE + 0x520)
-#define AR9170_MAC_REG_PRETBTT (AR9170_MAC_REG_BASE + 0x524)
-
-#define AR9170_MAC_REG_MAC_ADDR_L (AR9170_MAC_REG_BASE + 0x610)
-#define AR9170_MAC_REG_MAC_ADDR_H (AR9170_MAC_REG_BASE + 0x614)
-#define AR9170_MAC_REG_BSSID_L (AR9170_MAC_REG_BASE + 0x618)
-#define AR9170_MAC_REG_BSSID_H (AR9170_MAC_REG_BASE + 0x61c)
-
-#define AR9170_MAC_REG_GROUP_HASH_TBL_L (AR9170_MAC_REG_BASE + 0x624)
-#define AR9170_MAC_REG_GROUP_HASH_TBL_H (AR9170_MAC_REG_BASE + 0x628)
-
-#define AR9170_MAC_REG_RX_TIMEOUT (AR9170_MAC_REG_BASE + 0x62C)
-
-#define AR9170_MAC_REG_BASIC_RATE (AR9170_MAC_REG_BASE + 0x630)
-#define AR9170_MAC_REG_MANDATORY_RATE (AR9170_MAC_REG_BASE + 0x634)
-#define AR9170_MAC_REG_RTS_CTS_RATE (AR9170_MAC_REG_BASE + 0x638)
-#define AR9170_MAC_REG_BACKOFF_PROTECT (AR9170_MAC_REG_BASE + 0x63c)
-#define AR9170_MAC_REG_RX_THRESHOLD (AR9170_MAC_REG_BASE + 0x640)
-#define AR9170_MAC_REG_RX_PE_DELAY (AR9170_MAC_REG_BASE + 0x64C)
-
-#define AR9170_MAC_REG_DYNAMIC_SIFS_ACK (AR9170_MAC_REG_BASE + 0x658)
-#define AR9170_MAC_REG_SNIFFER (AR9170_MAC_REG_BASE + 0x674)
-#define AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC BIT(0)
-#define AR9170_MAC_REG_SNIFFER_DEFAULTS 0x02000000
-#define AR9170_MAC_REG_ENCRYPTION (AR9170_MAC_REG_BASE + 0x678)
-#define AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE BIT(3)
-#define AR9170_MAC_REG_ENCRYPTION_DEFAULTS 0x70
-
-#define AR9170_MAC_REG_MISC_680 (AR9170_MAC_REG_BASE + 0x680)
-#define AR9170_MAC_REG_TX_UNDERRUN (AR9170_MAC_REG_BASE + 0x688)
-
-#define AR9170_MAC_REG_FRAMETYPE_FILTER (AR9170_MAC_REG_BASE + 0x68c)
-#define AR9170_MAC_REG_FTF_ASSOC_REQ BIT(0)
-#define AR9170_MAC_REG_FTF_ASSOC_RESP BIT(1)
-#define AR9170_MAC_REG_FTF_REASSOC_REQ BIT(2)
-#define AR9170_MAC_REG_FTF_REASSOC_RESP BIT(3)
-#define AR9170_MAC_REG_FTF_PRB_REQ BIT(4)
-#define AR9170_MAC_REG_FTF_PRB_RESP BIT(5)
-#define AR9170_MAC_REG_FTF_BIT6 BIT(6)
-#define AR9170_MAC_REG_FTF_BIT7 BIT(7)
-#define AR9170_MAC_REG_FTF_BEACON BIT(8)
-#define AR9170_MAC_REG_FTF_ATIM BIT(9)
-#define AR9170_MAC_REG_FTF_DEASSOC BIT(10)
-#define AR9170_MAC_REG_FTF_AUTH BIT(11)
-#define AR9170_MAC_REG_FTF_DEAUTH BIT(12)
-#define AR9170_MAC_REG_FTF_BIT13 BIT(13)
-#define AR9170_MAC_REG_FTF_BIT14 BIT(14)
-#define AR9170_MAC_REG_FTF_BIT15 BIT(15)
-#define AR9170_MAC_REG_FTF_BAR BIT(24)
-#define AR9170_MAC_REG_FTF_BA BIT(25)
-#define AR9170_MAC_REG_FTF_PSPOLL BIT(26)
-#define AR9170_MAC_REG_FTF_RTS BIT(27)
-#define AR9170_MAC_REG_FTF_CTS BIT(28)
-#define AR9170_MAC_REG_FTF_ACK BIT(29)
-#define AR9170_MAC_REG_FTF_CFE BIT(30)
-#define AR9170_MAC_REG_FTF_CFE_ACK BIT(31)
-#define AR9170_MAC_REG_FTF_DEFAULTS 0x0700ffff
-#define AR9170_MAC_REG_FTF_MONITOR 0xfd00ffff
-
-#define AR9170_MAC_REG_RX_TOTAL (AR9170_MAC_REG_BASE + 0x6A0)
-#define AR9170_MAC_REG_RX_CRC32 (AR9170_MAC_REG_BASE + 0x6A4)
-#define AR9170_MAC_REG_RX_CRC16 (AR9170_MAC_REG_BASE + 0x6A8)
-#define AR9170_MAC_REG_RX_ERR_DECRYPTION_UNI (AR9170_MAC_REG_BASE + 0x6AC)
-#define AR9170_MAC_REG_RX_OVERRUN (AR9170_MAC_REG_BASE + 0x6B0)
-#define AR9170_MAC_REG_RX_ERR_DECRYPTION_MUL (AR9170_MAC_REG_BASE + 0x6BC)
-#define AR9170_MAC_REG_TX_RETRY (AR9170_MAC_REG_BASE + 0x6CC)
-#define AR9170_MAC_REG_TX_TOTAL (AR9170_MAC_REG_BASE + 0x6F4)
-
-
-#define AR9170_MAC_REG_ACK_EXTENSION (AR9170_MAC_REG_BASE + 0x690)
-#define AR9170_MAC_REG_EIFS_AND_SIFS (AR9170_MAC_REG_BASE + 0x698)
-
-#define AR9170_MAC_REG_SLOT_TIME (AR9170_MAC_REG_BASE + 0x6F0)
-
-#define AR9170_MAC_REG_POWERMANAGEMENT (AR9170_MAC_REG_BASE + 0x700)
-#define AR9170_MAC_REG_POWERMGT_IBSS 0xe0
-#define AR9170_MAC_REG_POWERMGT_AP 0xa1
-#define AR9170_MAC_REG_POWERMGT_STA 0x2
-#define AR9170_MAC_REG_POWERMGT_AP_WDS 0x3
-#define AR9170_MAC_REG_POWERMGT_DEFAULTS (0xf << 24)
-
-#define AR9170_MAC_REG_ROLL_CALL_TBL_L (AR9170_MAC_REG_BASE + 0x704)
-#define AR9170_MAC_REG_ROLL_CALL_TBL_H (AR9170_MAC_REG_BASE + 0x708)
-
-#define AR9170_MAC_REG_AC0_CW (AR9170_MAC_REG_BASE + 0xB00)
-#define AR9170_MAC_REG_AC1_CW (AR9170_MAC_REG_BASE + 0xB04)
-#define AR9170_MAC_REG_AC2_CW (AR9170_MAC_REG_BASE + 0xB08)
-#define AR9170_MAC_REG_AC3_CW (AR9170_MAC_REG_BASE + 0xB0C)
-#define AR9170_MAC_REG_AC4_CW (AR9170_MAC_REG_BASE + 0xB10)
-#define AR9170_MAC_REG_AC1_AC0_AIFS (AR9170_MAC_REG_BASE + 0xB14)
-#define AR9170_MAC_REG_AC3_AC2_AIFS (AR9170_MAC_REG_BASE + 0xB18)
-
-#define AR9170_MAC_REG_RETRY_MAX (AR9170_MAC_REG_BASE + 0xB28)
-
-#define AR9170_MAC_REG_FCS_SELECT (AR9170_MAC_REG_BASE + 0xBB0)
-#define AR9170_MAC_FCS_SWFCS 0x1
-#define AR9170_MAC_FCS_FIFO_PROT 0x4
-
-
-#define AR9170_MAC_REG_TXOP_NOT_ENOUGH_IND (AR9170_MAC_REG_BASE + 0xB30)
-
-#define AR9170_MAC_REG_AC1_AC0_TXOP (AR9170_MAC_REG_BASE + 0xB44)
-#define AR9170_MAC_REG_AC3_AC2_TXOP (AR9170_MAC_REG_BASE + 0xB48)
-
-#define AR9170_MAC_REG_AMPDU_FACTOR (AR9170_MAC_REG_BASE + 0xB9C)
-#define AR9170_MAC_REG_AMPDU_DENSITY (AR9170_MAC_REG_BASE + 0xBA0)
-
-#define AR9170_MAC_REG_ACK_TABLE (AR9170_MAC_REG_BASE + 0xC00)
-#define AR9170_MAC_REG_AMPDU_RX_THRESH (AR9170_MAC_REG_BASE + 0xC50)
-
-#define AR9170_MAC_REG_TXRX_MPI (AR9170_MAC_REG_BASE + 0xD7C)
-#define AR9170_MAC_TXRX_MPI_TX_MPI_MASK 0x0000000f
-#define AR9170_MAC_TXRX_MPI_TX_TO_MASK 0x0000fff0
-#define AR9170_MAC_TXRX_MPI_RX_MPI_MASK 0x000f0000
-#define AR9170_MAC_TXRX_MPI_RX_TO_MASK 0xfff00000
-
-#define AR9170_MAC_REG_BCN_ADDR (AR9170_MAC_REG_BASE + 0xD84)
-#define AR9170_MAC_REG_BCN_LENGTH (AR9170_MAC_REG_BASE + 0xD88)
-#define AR9170_MAC_REG_BCN_PLCP (AR9170_MAC_REG_BASE + 0xD90)
-#define AR9170_MAC_REG_BCN_CTRL (AR9170_MAC_REG_BASE + 0xD94)
-#define AR9170_MAC_REG_BCN_HT1 (AR9170_MAC_REG_BASE + 0xDA0)
-#define AR9170_MAC_REG_BCN_HT2 (AR9170_MAC_REG_BASE + 0xDA4)
-
-
-#define AR9170_PWR_REG_BASE 0x1D4000
-
-#define AR9170_PWR_REG_CLOCK_SEL (AR9170_PWR_REG_BASE + 0x008)
-#define AR9170_PWR_CLK_AHB_40MHZ 0
-#define AR9170_PWR_CLK_AHB_20_22MHZ 1
-#define AR9170_PWR_CLK_AHB_40_44MHZ 2
-#define AR9170_PWR_CLK_AHB_80_88MHZ 3
-#define AR9170_PWR_CLK_DAC_160_INV_DLY 0x70
-
-
-/* put beacon here in memory */
-#define AR9170_BEACON_BUFFER_ADDRESS 0x117900
-
-
-struct ar9170_tx_control {
- __le16 length;
- __le16 mac_control;
- __le32 phy_control;
- u8 frame_data[0];
-} __packed;
-
-/* these are either-or */
-#define AR9170_TX_MAC_PROT_RTS 0x0001
-#define AR9170_TX_MAC_PROT_CTS 0x0002
-
-#define AR9170_TX_MAC_NO_ACK 0x0004
-/* if unset, MAC will only do SIFS space before frame */
-#define AR9170_TX_MAC_BACKOFF 0x0008
-#define AR9170_TX_MAC_BURST 0x0010
-#define AR9170_TX_MAC_AGGR 0x0020
-
-/* encryption is a two-bit field */
-#define AR9170_TX_MAC_ENCR_NONE 0x0000
-#define AR9170_TX_MAC_ENCR_RC4 0x0040
-#define AR9170_TX_MAC_ENCR_CENC 0x0080
-#define AR9170_TX_MAC_ENCR_AES 0x00c0
-
-#define AR9170_TX_MAC_MMIC 0x0100
-#define AR9170_TX_MAC_HW_DURATION 0x0200
-#define AR9170_TX_MAC_QOS_SHIFT 10
-#define AR9170_TX_MAC_QOS_MASK (3 << AR9170_TX_MAC_QOS_SHIFT)
-#define AR9170_TX_MAC_AGGR_QOS_BIT1 0x0400
-#define AR9170_TX_MAC_AGGR_QOS_BIT2 0x0800
-#define AR9170_TX_MAC_DISABLE_TXOP 0x1000
-#define AR9170_TX_MAC_TXOP_RIFS 0x2000
-#define AR9170_TX_MAC_IMM_AMPDU 0x4000
-#define AR9170_TX_MAC_RATE_PROBE 0x8000
-
-/* either-or */
-#define AR9170_TX_PHY_MOD_MASK 0x00000003
-#define AR9170_TX_PHY_MOD_CCK 0x00000000
-#define AR9170_TX_PHY_MOD_OFDM 0x00000001
-#define AR9170_TX_PHY_MOD_HT 0x00000002
-
-/* depends on modulation */
-#define AR9170_TX_PHY_SHORT_PREAMBLE 0x00000004
-#define AR9170_TX_PHY_GREENFIELD 0x00000004
-
-#define AR9170_TX_PHY_BW_SHIFT 3
-#define AR9170_TX_PHY_BW_MASK (3 << AR9170_TX_PHY_BW_SHIFT)
-#define AR9170_TX_PHY_BW_20MHZ 0
-#define AR9170_TX_PHY_BW_40MHZ 2
-#define AR9170_TX_PHY_BW_40MHZ_DUP 3
-
-#define AR9170_TX_PHY_TX_HEAVY_CLIP_SHIFT 6
-#define AR9170_TX_PHY_TX_HEAVY_CLIP_MASK (7 << AR9170_TX_PHY_TX_HEAVY_CLIP_SHIFT)
-
-#define AR9170_TX_PHY_TX_PWR_SHIFT 9
-#define AR9170_TX_PHY_TX_PWR_MASK (0x3f << AR9170_TX_PHY_TX_PWR_SHIFT)
-
-/* not part of the hw-spec */
-#define AR9170_TX_PHY_QOS_SHIFT 25
-#define AR9170_TX_PHY_QOS_MASK (3 << AR9170_TX_PHY_QOS_SHIFT)
-
-#define AR9170_TX_PHY_TXCHAIN_SHIFT 15
-#define AR9170_TX_PHY_TXCHAIN_MASK (7 << AR9170_TX_PHY_TXCHAIN_SHIFT)
-#define AR9170_TX_PHY_TXCHAIN_1 1
-/* use for cck, ofdm 6/9/12/18/24 and HT if capable */
-#define AR9170_TX_PHY_TXCHAIN_2 5
-
-#define AR9170_TX_PHY_MCS_SHIFT 18
-#define AR9170_TX_PHY_MCS_MASK (0x7f << AR9170_TX_PHY_MCS_SHIFT)
-
-#define AR9170_TX_PHY_SHORT_GI 0x80000000
-
-#define AR5416_MAX_RATE_POWER 63
-
-struct ar9170_rx_head {
- u8 plcp[12];
-} __packed;
-
-struct ar9170_rx_phystatus {
- union {
- struct {
- u8 rssi_ant0, rssi_ant1, rssi_ant2,
- rssi_ant0x, rssi_ant1x, rssi_ant2x,
- rssi_combined;
- } __packed;
- u8 rssi[7];
- } __packed;
-
- u8 evm_stream0[6], evm_stream1[6];
- u8 phy_err;
-} __packed;
-
-struct ar9170_rx_macstatus {
- u8 SAidx, DAidx;
- u8 error;
- u8 status;
-} __packed;
-
-#define AR9170_ENC_ALG_NONE 0x0
-#define AR9170_ENC_ALG_WEP64 0x1
-#define AR9170_ENC_ALG_TKIP 0x2
-#define AR9170_ENC_ALG_AESCCMP 0x4
-#define AR9170_ENC_ALG_WEP128 0x5
-#define AR9170_ENC_ALG_WEP256 0x6
-#define AR9170_ENC_ALG_CENC 0x7
-
-#define AR9170_RX_ENC_SOFTWARE 0x8
-
-static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_macstatus *t)
-{
- return (t->SAidx & 0xc0) >> 4 |
- (t->DAidx & 0xc0) >> 6;
-}
-
-#define AR9170_RX_STATUS_MODULATION_MASK 0x03
-#define AR9170_RX_STATUS_MODULATION_CCK 0x00
-#define AR9170_RX_STATUS_MODULATION_OFDM 0x01
-#define AR9170_RX_STATUS_MODULATION_HT 0x02
-#define AR9170_RX_STATUS_MODULATION_DUPOFDM 0x03
-
-/* depends on modulation */
-#define AR9170_RX_STATUS_SHORT_PREAMBLE 0x08
-#define AR9170_RX_STATUS_GREENFIELD 0x08
-
-#define AR9170_RX_STATUS_MPDU_MASK 0x30
-#define AR9170_RX_STATUS_MPDU_SINGLE 0x00
-#define AR9170_RX_STATUS_MPDU_FIRST 0x20
-#define AR9170_RX_STATUS_MPDU_MIDDLE 0x30
-#define AR9170_RX_STATUS_MPDU_LAST 0x10
-
-#define AR9170_RX_ERROR_RXTO 0x01
-#define AR9170_RX_ERROR_OVERRUN 0x02
-#define AR9170_RX_ERROR_DECRYPT 0x04
-#define AR9170_RX_ERROR_FCS 0x08
-#define AR9170_RX_ERROR_WRONG_RA 0x10
-#define AR9170_RX_ERROR_PLCP 0x20
-#define AR9170_RX_ERROR_MMIC 0x40
-#define AR9170_RX_ERROR_FATAL 0x80
-
-struct ar9170_cmd_tx_status {
- u8 dst[ETH_ALEN];
- __le32 rate;
- __le16 status;
-} __packed;
-
-#define AR9170_TX_STATUS_COMPLETE 0x00
-#define AR9170_TX_STATUS_RETRY 0x01
-#define AR9170_TX_STATUS_FAILED 0x02
-
-struct ar9170_cmd_ba_failed_count {
- __le16 failed;
- __le16 rate;
-} __packed;
-
-struct ar9170_cmd_response {
- u8 flag;
- u8 type;
- __le16 padding;
-
- union {
- struct ar9170_cmd_tx_status tx_status;
- struct ar9170_cmd_ba_failed_count ba_fail_cnt;
- u8 data[0];
- };
-} __packed;
-
-/* QoS */
-
-/* mac80211 queue to HW/FW map */
-static const u8 ar9170_qos_hwmap[4] = { 3, 2, 0, 1 };
-
-/* HW/FW queue to mac80211 map */
-static const u8 ar9170_qos_mac80211map[4] = { 2, 3, 1, 0 };
-
-enum ar9170_txq {
- AR9170_TXQ_BE,
- AR9170_TXQ_BK,
- AR9170_TXQ_VI,
- AR9170_TXQ_VO,
-
- __AR9170_NUM_TXQ,
-};
-
-#define AR9170_TXQ_DEPTH 32
-#define AR9170_TX_MAX_PENDING 128
-#define AR9170_RX_STREAM_MAX_SIZE 65535
-
-#endif /* __AR9170_HW_H */
diff --git a/drivers/net/wireless/ath/ar9170/led.c b/drivers/net/wireless/ath/ar9170/led.c
deleted file mode 100644
index 832d900..0000000
--- a/drivers/net/wireless/ath/ar9170/led.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * LED handling
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ar9170.h"
-#include "cmd.h"
-
-int ar9170_set_leds_state(struct ar9170 *ar, u32 led_state)
-{
- return ar9170_write_reg(ar, AR9170_GPIO_REG_DATA, led_state);
-}
-
-int ar9170_init_leds(struct ar9170 *ar)
-{
- int err;
-
- /* disable LEDs */
- /* GPIO [0/1 mode: output, 2/3: input] */
- err = ar9170_write_reg(ar, AR9170_GPIO_REG_PORT_TYPE, 3);
- if (err)
- goto out;
-
- /* GPIO 0/1 value: off */
- err = ar9170_set_leds_state(ar, 0);
-
-out:
- return err;
-}
-
-#ifdef CONFIG_AR9170_LEDS
-static void ar9170_update_leds(struct work_struct *work)
-{
- struct ar9170 *ar = container_of(work, struct ar9170, led_work.work);
- int i, tmp, blink_delay = 1000;
- u32 led_val = 0;
- bool rerun = false;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return ;
-
- mutex_lock(&ar->mutex);
- for (i = 0; i < AR9170_NUM_LEDS; i++)
- if (ar->leds[i].registered && ar->leds[i].toggled) {
- led_val |= 1 << i;
-
- tmp = 70 + 200 / (ar->leds[i].toggled);
- if (tmp < blink_delay)
- blink_delay = tmp;
-
- if (ar->leds[i].toggled > 1)
- ar->leds[i].toggled = 0;
-
- rerun = true;
- }
-
- ar9170_set_leds_state(ar, led_val);
- mutex_unlock(&ar->mutex);
-
- if (!rerun)
- return;
-
- ieee80211_queue_delayed_work(ar->hw,
- &ar->led_work,
- msecs_to_jiffies(blink_delay));
-}
-
-static void ar9170_led_brightness_set(struct led_classdev *led,
- enum led_brightness brightness)
-{
- struct ar9170_led *arl = container_of(led, struct ar9170_led, l);
- struct ar9170 *ar = arl->ar;
-
- if (unlikely(!arl->registered))
- return ;
-
- if (arl->last_state != !!brightness) {
- arl->toggled++;
- arl->last_state = !!brightness;
- }
-
- if (likely(IS_ACCEPTING_CMD(ar) && arl->toggled))
- ieee80211_queue_delayed_work(ar->hw, &ar->led_work, HZ/10);
-}
-
-static int ar9170_register_led(struct ar9170 *ar, int i, char *name,
- char *trigger)
-{
- int err;
-
- snprintf(ar->leds[i].name, sizeof(ar->leds[i].name),
- "ar9170-%s::%s", wiphy_name(ar->hw->wiphy), name);
-
- ar->leds[i].ar = ar;
- ar->leds[i].l.name = ar->leds[i].name;
- ar->leds[i].l.brightness_set = ar9170_led_brightness_set;
- ar->leds[i].l.brightness = 0;
- ar->leds[i].l.default_trigger = trigger;
-
- err = led_classdev_register(wiphy_dev(ar->hw->wiphy),
- &ar->leds[i].l);
- if (err)
- wiphy_err(ar->hw->wiphy, "failed to register %s LED (%d).\n",
- ar->leds[i].name, err);
- else
- ar->leds[i].registered = true;
-
- return err;
-}
-
-void ar9170_unregister_leds(struct ar9170 *ar)
-{
- int i;
-
- for (i = 0; i < AR9170_NUM_LEDS; i++)
- if (ar->leds[i].registered) {
- led_classdev_unregister(&ar->leds[i].l);
- ar->leds[i].registered = false;
- ar->leds[i].toggled = 0;
- }
-
- cancel_delayed_work_sync(&ar->led_work);
-}
-
-int ar9170_register_leds(struct ar9170 *ar)
-{
- int err;
-
- INIT_DELAYED_WORK(&ar->led_work, ar9170_update_leds);
-
- err = ar9170_register_led(ar, 0, "tx",
- ieee80211_get_tx_led_name(ar->hw));
- if (err)
- goto fail;
-
- err = ar9170_register_led(ar, 1, "assoc",
- ieee80211_get_assoc_led_name(ar->hw));
- if (err)
- goto fail;
-
- return 0;
-
-fail:
- ar9170_unregister_leds(ar);
- return err;
-}
-
-#endif /* CONFIG_AR9170_LEDS */
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
deleted file mode 100644
index 857e861..0000000
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * MAC programming
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <asm/unaligned.h>
-
-#include "ar9170.h"
-#include "cmd.h"
-
-int ar9170_set_dyn_sifs_ack(struct ar9170 *ar)
-{
- u32 val;
-
- if (conf_is_ht40(&ar->hw->conf))
- val = 0x010a;
- else {
- if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
- val = 0x105;
- else
- val = 0x104;
- }
-
- return ar9170_write_reg(ar, AR9170_MAC_REG_DYNAMIC_SIFS_ACK, val);
-}
-
-int ar9170_set_slot_time(struct ar9170 *ar)
-{
- u32 slottime = 20;
-
- if (!ar->vif)
- return 0;
-
- if ((ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) ||
- ar->vif->bss_conf.use_short_slot)
- slottime = 9;
-
- return ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, slottime << 10);
-}
-
-int ar9170_set_basic_rates(struct ar9170 *ar)
-{
- u8 cck, ofdm;
-
- if (!ar->vif)
- return 0;
-
- ofdm = ar->vif->bss_conf.basic_rates >> 4;
-
- /* FIXME: is still necessary? */
- if (ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
- cck = 0;
- else
- cck = ar->vif->bss_conf.basic_rates & 0xf;
-
- return ar9170_write_reg(ar, AR9170_MAC_REG_BASIC_RATE,
- ofdm << 8 | cck);
-}
-
-int ar9170_set_qos(struct ar9170 *ar)
-{
- ar9170_regwrite_begin(ar);
-
- ar9170_regwrite(AR9170_MAC_REG_AC0_CW, ar->edcf[0].cw_min |
- (ar->edcf[0].cw_max << 16));
- ar9170_regwrite(AR9170_MAC_REG_AC1_CW, ar->edcf[1].cw_min |
- (ar->edcf[1].cw_max << 16));
- ar9170_regwrite(AR9170_MAC_REG_AC2_CW, ar->edcf[2].cw_min |
- (ar->edcf[2].cw_max << 16));
- ar9170_regwrite(AR9170_MAC_REG_AC3_CW, ar->edcf[3].cw_min |
- (ar->edcf[3].cw_max << 16));
- ar9170_regwrite(AR9170_MAC_REG_AC4_CW, ar->edcf[4].cw_min |
- (ar->edcf[4].cw_max << 16));
-
- ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_AIFS,
- ((ar->edcf[0].aifs * 9 + 10)) |
- ((ar->edcf[1].aifs * 9 + 10) << 12) |
- ((ar->edcf[2].aifs * 9 + 10) << 24));
- ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_AIFS,
- ((ar->edcf[2].aifs * 9 + 10) >> 8) |
- ((ar->edcf[3].aifs * 9 + 10) << 4) |
- ((ar->edcf[4].aifs * 9 + 10) << 16));
-
- ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_TXOP,
- ar->edcf[0].txop | ar->edcf[1].txop << 16);
- ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_TXOP,
- ar->edcf[2].txop | ar->edcf[3].txop << 16);
-
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-static int ar9170_set_ampdu_density(struct ar9170 *ar, u8 mpdudensity)
-{
- u32 val;
-
- /* don't allow AMPDU density > 8us */
- if (mpdudensity > 6)
- return -EINVAL;
-
- /* Watch out! Otus uses slightly different density values. */
- val = 0x140a00 | (mpdudensity ? (mpdudensity + 1) : 0);
-
- ar9170_regwrite_begin(ar);
- ar9170_regwrite(AR9170_MAC_REG_AMPDU_DENSITY, val);
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-int ar9170_init_mac(struct ar9170 *ar)
-{
- ar9170_regwrite_begin(ar);
-
- ar9170_regwrite(AR9170_MAC_REG_ACK_EXTENSION, 0x40);
-
- ar9170_regwrite(AR9170_MAC_REG_RETRY_MAX, 0);
-
- /* enable MMIC */
- ar9170_regwrite(AR9170_MAC_REG_SNIFFER,
- AR9170_MAC_REG_SNIFFER_DEFAULTS);
-
- ar9170_regwrite(AR9170_MAC_REG_RX_THRESHOLD, 0xc1f80);
-
- ar9170_regwrite(AR9170_MAC_REG_RX_PE_DELAY, 0x70);
- ar9170_regwrite(AR9170_MAC_REG_EIFS_AND_SIFS, 0xa144000);
- ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, 9 << 10);
-
- /* CF-END mode */
- ar9170_regwrite(0x1c3b2c, 0x19000000);
-
- /* NAV protects ACK only (in TXOP) */
- ar9170_regwrite(0x1c3b38, 0x201);
-
- /* Set Beacon PHY CTRL's TPC to 0x7, TA1=1 */
- /* OTUS set AM to 0x1 */
- ar9170_regwrite(AR9170_MAC_REG_BCN_HT1, 0x8000170);
-
- ar9170_regwrite(AR9170_MAC_REG_BACKOFF_PROTECT, 0x105);
-
- /* AGG test code*/
- /* Aggregation MAX number and timeout */
- ar9170_regwrite(0x1c3b9c, 0x10000a);
-
- ar9170_regwrite(AR9170_MAC_REG_FRAMETYPE_FILTER,
- AR9170_MAC_REG_FTF_DEFAULTS);
-
- /* Enable deaggregator, response in sniffer mode */
- ar9170_regwrite(0x1c3c40, 0x1 | 1<<30);
-
- /* rate sets */
- ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE, 0x150f);
- ar9170_regwrite(AR9170_MAC_REG_MANDATORY_RATE, 0x150f);
- ar9170_regwrite(AR9170_MAC_REG_RTS_CTS_RATE, 0x10b01bb);
-
- /* MIMO response control */
- ar9170_regwrite(0x1c3694, 0x4003C1E);/* bit 26~28 otus-AM */
-
- /* switch MAC to OTUS interface */
- ar9170_regwrite(0x1c3600, 0x3);
-
- ar9170_regwrite(AR9170_MAC_REG_AMPDU_RX_THRESH, 0xffff);
-
- /* set PHY register read timeout (??) */
- ar9170_regwrite(AR9170_MAC_REG_MISC_680, 0xf00008);
-
- /* Disable Rx TimeOut, workaround for BB. */
- ar9170_regwrite(AR9170_MAC_REG_RX_TIMEOUT, 0x0);
-
- /* Set CPU clock frequency to 88/80MHz */
- ar9170_regwrite(AR9170_PWR_REG_CLOCK_SEL,
- AR9170_PWR_CLK_AHB_80_88MHZ |
- AR9170_PWR_CLK_DAC_160_INV_DLY);
-
- /* Set WLAN DMA interrupt mode: generate int per packet */
- ar9170_regwrite(AR9170_MAC_REG_TXRX_MPI, 0x110011);
-
- ar9170_regwrite(AR9170_MAC_REG_FCS_SELECT,
- AR9170_MAC_FCS_FIFO_PROT);
-
- /* Disables the CF_END frame, undocumented register */
- ar9170_regwrite(AR9170_MAC_REG_TXOP_NOT_ENOUGH_IND,
- 0x141E0F48);
-
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-static int ar9170_set_mac_reg(struct ar9170 *ar, const u32 reg, const u8 *mac)
-{
- static const u8 zero[ETH_ALEN] = { 0 };
-
- if (!mac)
- mac = zero;
-
- ar9170_regwrite_begin(ar);
-
- ar9170_regwrite(reg, get_unaligned_le32(mac));
- ar9170_regwrite(reg + 4, get_unaligned_le16(mac + 4));
-
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-int ar9170_update_multicast(struct ar9170 *ar, const u64 mc_hash)
-{
- int err;
-
- ar9170_regwrite_begin(ar);
- ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_H, mc_hash >> 32);
- ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_L, mc_hash);
- ar9170_regwrite_finish();
- err = ar9170_regwrite_result();
- if (err)
- return err;
-
- ar->cur_mc_hash = mc_hash;
- return 0;
-}
-
-int ar9170_update_frame_filter(struct ar9170 *ar, const u32 filter)
-{
- int err;
-
- err = ar9170_write_reg(ar, AR9170_MAC_REG_FRAMETYPE_FILTER, filter);
- if (err)
- return err;
-
- ar->cur_filter = filter;
- return 0;
-}
-
-static int ar9170_set_promiscouous(struct ar9170 *ar)
-{
- u32 encr_mode, sniffer;
- int err;
-
- err = ar9170_read_reg(ar, AR9170_MAC_REG_SNIFFER, &sniffer);
- if (err)
- return err;
-
- err = ar9170_read_reg(ar, AR9170_MAC_REG_ENCRYPTION, &encr_mode);
- if (err)
- return err;
-
- if (ar->sniffer_enabled) {
- sniffer |= AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC;
-
- /*
- * Rx decryption works in place.
- *
- * If we don't disable it, the hardware will render all
- * encrypted frames which are encrypted with an unknown
- * key useless.
- */
-
- encr_mode |= AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE;
- ar->sniffer_enabled = true;
- } else {
- sniffer &= ~AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC;
-
- if (ar->rx_software_decryption)
- encr_mode |= AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE;
- else
- encr_mode &= ~AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE;
- }
-
- ar9170_regwrite_begin(ar);
- ar9170_regwrite(AR9170_MAC_REG_ENCRYPTION, encr_mode);
- ar9170_regwrite(AR9170_MAC_REG_SNIFFER, sniffer);
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-int ar9170_set_operating_mode(struct ar9170 *ar)
-{
- struct ath_common *common = &ar->common;
- u32 pm_mode = AR9170_MAC_REG_POWERMGT_DEFAULTS;
- u8 *mac_addr, *bssid;
- int err;
-
- if (ar->vif) {
- mac_addr = common->macaddr;
- bssid = common->curbssid;
-
- switch (ar->vif->type) {
- case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_ADHOC:
- pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS;
- break;
- case NL80211_IFTYPE_AP:
- pm_mode |= AR9170_MAC_REG_POWERMGT_AP;
- break;
- case NL80211_IFTYPE_WDS:
- pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS;
- break;
- case NL80211_IFTYPE_MONITOR:
- ar->sniffer_enabled = true;
- ar->rx_software_decryption = true;
- break;
- default:
- pm_mode |= AR9170_MAC_REG_POWERMGT_STA;
- break;
- }
- } else {
- mac_addr = NULL;
- bssid = NULL;
- }
-
- err = ar9170_set_mac_reg(ar, AR9170_MAC_REG_MAC_ADDR_L, mac_addr);
- if (err)
- return err;
-
- err = ar9170_set_mac_reg(ar, AR9170_MAC_REG_BSSID_L, bssid);
- if (err)
- return err;
-
- err = ar9170_set_promiscouous(ar);
- if (err)
- return err;
-
- /* set AMPDU density to 8us. */
- err = ar9170_set_ampdu_density(ar, 6);
- if (err)
- return err;
-
- ar9170_regwrite_begin(ar);
-
- ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode);
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-int ar9170_set_hwretry_limit(struct ar9170 *ar, unsigned int max_retry)
-{
- u32 tmp = min_t(u32, 0x33333, max_retry * 0x11111);
-
- return ar9170_write_reg(ar, AR9170_MAC_REG_RETRY_MAX, tmp);
-}
-
-int ar9170_set_beacon_timers(struct ar9170 *ar)
-{
- u32 v = 0;
- u32 pretbtt = 0;
-
- if (ar->vif) {
- v |= ar->vif->bss_conf.beacon_int;
-
- if (ar->enable_beacon) {
- switch (ar->vif->type) {
- case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_ADHOC:
- v |= BIT(25);
- break;
- case NL80211_IFTYPE_AP:
- v |= BIT(24);
- pretbtt = (ar->vif->bss_conf.beacon_int - 6) <<
- 16;
- break;
- default:
- break;
- }
- }
-
- v |= ar->vif->bss_conf.dtim_period << 16;
- }
-
- ar9170_regwrite_begin(ar);
- ar9170_regwrite(AR9170_MAC_REG_PRETBTT, pretbtt);
- ar9170_regwrite(AR9170_MAC_REG_BCN_PERIOD, v);
- ar9170_regwrite_finish();
- return ar9170_regwrite_result();
-}
-
-int ar9170_update_beacon(struct ar9170 *ar)
-{
- struct sk_buff *skb;
- __le32 *data, *old = NULL;
- u32 word;
- int i;
-
- skb = ieee80211_beacon_get(ar->hw, ar->vif);
- if (!skb)
- return -ENOMEM;
-
- data = (__le32 *)skb->data;
- if (ar->beacon)
- old = (__le32 *)ar->beacon->data;
-
- ar9170_regwrite_begin(ar);
- for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) {
- /*
- * XXX: This accesses beyond skb data for up
- * to the last 3 bytes!!
- */
-
- if (old && (data[i] == old[i]))
- continue;
-
- word = le32_to_cpu(data[i]);
- ar9170_regwrite(AR9170_BEACON_BUFFER_ADDRESS + 4 * i, word);
- }
-
- /* XXX: use skb->cb info */
- if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
- ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
- ((skb->len + 4) << (3 + 16)) + 0x0400);
- else
- ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
- ((skb->len + 4) << 16) + 0x001b);
-
- ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4);
- ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS);
- ar9170_regwrite(AR9170_MAC_REG_BCN_CTRL, 1);
-
- ar9170_regwrite_finish();
-
- dev_kfree_skb(ar->beacon);
- ar->beacon = skb;
-
- return ar9170_regwrite_result();
-}
-
-void ar9170_new_beacon(struct work_struct *work)
-{
- struct ar9170 *ar = container_of(work, struct ar9170,
- beacon_work);
- struct sk_buff *skb;
-
- if (unlikely(!IS_STARTED(ar)))
- return ;
-
- mutex_lock(&ar->mutex);
-
- if (!ar->vif)
- goto out;
-
- ar9170_update_beacon(ar);
-
- rcu_read_lock();
- while ((skb = ieee80211_get_buffered_bc(ar->hw, ar->vif)))
- ar9170_op_tx(ar->hw, skb);
-
- rcu_read_unlock();
-
- out:
- mutex_unlock(&ar->mutex);
-}
-
-int ar9170_upload_key(struct ar9170 *ar, u8 id, const u8 *mac, u8 ktype,
- u8 keyidx, u8 *keydata, int keylen)
-{
- __le32 vals[7];
- static const u8 bcast[ETH_ALEN] =
- { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
- u8 dummy;
-
- mac = mac ? : bcast;
-
- vals[0] = cpu_to_le32((keyidx << 16) + id);
- vals[1] = cpu_to_le32(mac[1] << 24 | mac[0] << 16 | ktype);
- vals[2] = cpu_to_le32(mac[5] << 24 | mac[4] << 16 |
- mac[3] << 8 | mac[2]);
- memset(&vals[3], 0, 16);
- if (keydata)
- memcpy(&vals[3], keydata, keylen);
-
- return ar->exec_cmd(ar, AR9170_CMD_EKEY,
- sizeof(vals), (u8 *)vals,
- 1, &dummy);
-}
-
-int ar9170_disable_key(struct ar9170 *ar, u8 id)
-{
- __le32 val = cpu_to_le32(id);
- u8 dummy;
-
- return ar->exec_cmd(ar, AR9170_CMD_EKEY,
- sizeof(val), (u8 *)&val,
- 1, &dummy);
-}
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
deleted file mode 100644
index ccc2eda..0000000
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ /dev/null
@@ -1,2190 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * mac80211 interaction code
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, Christian Lamparter <chunkeey@web.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/etherdevice.h>
-#include <net/mac80211.h>
-#include "ar9170.h"
-#include "hw.h"
-#include "cmd.h"
-
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
-#define RATE(_bitrate, _hw_rate, _txpidx, _flags) { \
- .bitrate = (_bitrate), \
- .flags = (_flags), \
- .hw_value = (_hw_rate) | (_txpidx) << 4, \
-}
-
-static struct ieee80211_rate __ar9170_ratetable[] = {
- RATE(10, 0, 0, 0),
- RATE(20, 1, 1, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(55, 2, 2, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(110, 3, 3, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(60, 0xb, 0, 0),
- RATE(90, 0xf, 0, 0),
- RATE(120, 0xa, 0, 0),
- RATE(180, 0xe, 0, 0),
- RATE(240, 0x9, 0, 0),
- RATE(360, 0xd, 1, 0),
- RATE(480, 0x8, 2, 0),
- RATE(540, 0xc, 3, 0),
-};
-#undef RATE
-
-#define ar9170_g_ratetable (__ar9170_ratetable + 0)
-#define ar9170_g_ratetable_size 12
-#define ar9170_a_ratetable (__ar9170_ratetable + 4)
-#define ar9170_a_ratetable_size 8
-
-/*
- * NB: The hw_value is used as an index into the ar9170_phy_freq_params
- * array in phy.c so that we don't have to do frequency lookups!
- */
-#define CHAN(_freq, _idx) { \
- .center_freq = (_freq), \
- .hw_value = (_idx), \
- .max_power = 18, /* XXX */ \
-}
-
-static struct ieee80211_channel ar9170_2ghz_chantable[] = {
- CHAN(2412, 0),
- CHAN(2417, 1),
- CHAN(2422, 2),
- CHAN(2427, 3),
- CHAN(2432, 4),
- CHAN(2437, 5),
- CHAN(2442, 6),
- CHAN(2447, 7),
- CHAN(2452, 8),
- CHAN(2457, 9),
- CHAN(2462, 10),
- CHAN(2467, 11),
- CHAN(2472, 12),
- CHAN(2484, 13),
-};
-
-static struct ieee80211_channel ar9170_5ghz_chantable[] = {
- CHAN(4920, 14),
- CHAN(4940, 15),
- CHAN(4960, 16),
- CHAN(4980, 17),
- CHAN(5040, 18),
- CHAN(5060, 19),
- CHAN(5080, 20),
- CHAN(5180, 21),
- CHAN(5200, 22),
- CHAN(5220, 23),
- CHAN(5240, 24),
- CHAN(5260, 25),
- CHAN(5280, 26),
- CHAN(5300, 27),
- CHAN(5320, 28),
- CHAN(5500, 29),
- CHAN(5520, 30),
- CHAN(5540, 31),
- CHAN(5560, 32),
- CHAN(5580, 33),
- CHAN(5600, 34),
- CHAN(5620, 35),
- CHAN(5640, 36),
- CHAN(5660, 37),
- CHAN(5680, 38),
- CHAN(5700, 39),
- CHAN(5745, 40),
- CHAN(5765, 41),
- CHAN(5785, 42),
- CHAN(5805, 43),
- CHAN(5825, 44),
- CHAN(5170, 45),
- CHAN(5190, 46),
- CHAN(5210, 47),
- CHAN(5230, 48),
-};
-#undef CHAN
-
-#define AR9170_HT_CAP \
-{ \
- .ht_supported = true, \
- .cap = IEEE80211_HT_CAP_MAX_AMSDU | \
- IEEE80211_HT_CAP_SUP_WIDTH_20_40 | \
- IEEE80211_HT_CAP_SGI_40 | \
- IEEE80211_HT_CAP_GRN_FLD | \
- IEEE80211_HT_CAP_DSSSCCK40 | \
- IEEE80211_HT_CAP_SM_PS, \
- .ampdu_factor = 3, \
- .ampdu_density = 6, \
- .mcs = { \
- .rx_mask = { 0xff, 0xff, 0, 0, 0x1, 0, 0, 0, 0, 0, }, \
- .rx_highest = cpu_to_le16(300), \
- .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \
- }, \
-}
-
-static struct ieee80211_supported_band ar9170_band_2GHz = {
- .channels = ar9170_2ghz_chantable,
- .n_channels = ARRAY_SIZE(ar9170_2ghz_chantable),
- .bitrates = ar9170_g_ratetable,
- .n_bitrates = ar9170_g_ratetable_size,
- .ht_cap = AR9170_HT_CAP,
-};
-
-static struct ieee80211_supported_band ar9170_band_5GHz = {
- .channels = ar9170_5ghz_chantable,
- .n_channels = ARRAY_SIZE(ar9170_5ghz_chantable),
- .bitrates = ar9170_a_ratetable,
- .n_bitrates = ar9170_a_ratetable_size,
- .ht_cap = AR9170_HT_CAP,
-};
-
-static void ar9170_tx(struct ar9170 *ar);
-
-static inline u16 ar9170_get_seq_h(struct ieee80211_hdr *hdr)
-{
- return le16_to_cpu(hdr->seq_ctrl) >> 4;
-}
-
-static inline u16 ar9170_get_seq(struct sk_buff *skb)
-{
- struct ar9170_tx_control *txc = (void *) skb->data;
- return ar9170_get_seq_h((void *) txc->frame_data);
-}
-
-#ifdef AR9170_QUEUE_DEBUG
-static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
-{
- struct ar9170_tx_control *txc = (void *) skb->data;
- struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
- struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
- struct ieee80211_hdr *hdr = (void *) txc->frame_data;
-
- wiphy_debug(ar->hw->wiphy,
- "=> FRAME [skb:%p, q:%d, DA:[%pM] s:%d "
- "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
- skb, skb_get_queue_mapping(skb),
- ieee80211_get_DA(hdr), ar9170_get_seq_h(hdr),
- le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
- jiffies_to_msecs(arinfo->timeout - jiffies));
-}
-
-static void __ar9170_dump_txqueue(struct ar9170 *ar,
- struct sk_buff_head *queue)
-{
- struct sk_buff *skb;
- int i = 0;
-
- printk(KERN_DEBUG "---[ cut here ]---\n");
- wiphy_debug(ar->hw->wiphy, "%d entries in queue.\n",
- skb_queue_len(queue));
-
- skb_queue_walk(queue, skb) {
- printk(KERN_DEBUG "index:%d =>\n", i++);
- ar9170_print_txheader(ar, skb);
- }
- if (i != skb_queue_len(queue))
- printk(KERN_DEBUG "WARNING: queue frame counter "
- "mismatch %d != %d\n", skb_queue_len(queue), i);
- printk(KERN_DEBUG "---[ end ]---\n");
-}
-#endif /* AR9170_QUEUE_DEBUG */
-
-#ifdef AR9170_QUEUE_DEBUG
-static void ar9170_dump_txqueue(struct ar9170 *ar,
- struct sk_buff_head *queue)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&queue->lock, flags);
- __ar9170_dump_txqueue(ar, queue);
- spin_unlock_irqrestore(&queue->lock, flags);
-}
-#endif /* AR9170_QUEUE_DEBUG */
-
-#ifdef AR9170_QUEUE_STOP_DEBUG
-static void __ar9170_dump_txstats(struct ar9170 *ar)
-{
- int i;
-
- wiphy_debug(ar->hw->wiphy, "QoS queue stats\n");
-
- for (i = 0; i < __AR9170_NUM_TXQ; i++)
- wiphy_debug(ar->hw->wiphy,
- "queue:%d limit:%d len:%d waitack:%d stopped:%d\n",
- i, ar->tx_stats[i].limit, ar->tx_stats[i].len,
- skb_queue_len(&ar->tx_status[i]),
- ieee80211_queue_stopped(ar->hw, i));
-}
-#endif /* AR9170_QUEUE_STOP_DEBUG */
-
-/* caller must guarantee exclusive access for _bin_ queue. */
-static void ar9170_recycle_expired(struct ar9170 *ar,
- struct sk_buff_head *queue,
- struct sk_buff_head *bin)
-{
- struct sk_buff *skb, *old = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&queue->lock, flags);
- while ((skb = skb_peek(queue))) {
- struct ieee80211_tx_info *txinfo;
- struct ar9170_tx_info *arinfo;
-
- txinfo = IEEE80211_SKB_CB(skb);
- arinfo = (void *) txinfo->rate_driver_data;
-
- if (time_is_before_jiffies(arinfo->timeout)) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "[%ld > %ld] frame expired => recycle\n",
- jiffies, arinfo->timeout);
- ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
- __skb_unlink(skb, queue);
- __skb_queue_tail(bin, skb);
- } else {
- break;
- }
-
- if (unlikely(old == skb)) {
- /* bail out - queue is shot. */
-
- WARN_ON(1);
- break;
- }
- old = skb;
- }
- spin_unlock_irqrestore(&queue->lock, flags);
-}
-
-static void ar9170_tx_status(struct ar9170 *ar, struct sk_buff *skb,
- u16 tx_status)
-{
- struct ieee80211_tx_info *txinfo;
- unsigned int retries = 0;
-
- txinfo = IEEE80211_SKB_CB(skb);
- ieee80211_tx_info_clear_status(txinfo);
-
- switch (tx_status) {
- case AR9170_TX_STATUS_RETRY:
- retries = 2;
- case AR9170_TX_STATUS_COMPLETE:
- txinfo->flags |= IEEE80211_TX_STAT_ACK;
- break;
-
- case AR9170_TX_STATUS_FAILED:
- retries = ar->hw->conf.long_frame_max_tx_count;
- break;
-
- default:
- wiphy_err(ar->hw->wiphy,
- "invalid tx_status response (%x)\n", tx_status);
- break;
- }
-
- txinfo->status.rates[0].count = retries + 1;
- skb_pull(skb, sizeof(struct ar9170_tx_control));
- ieee80211_tx_status_irqsafe(ar->hw, skb);
-}
-
-void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
-{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ar9170_tx_info *arinfo = (void *) info->rate_driver_data;
- unsigned int queue = skb_get_queue_mapping(skb);
- unsigned long flags;
-
- spin_lock_irqsave(&ar->tx_stats_lock, flags);
- ar->tx_stats[queue].len--;
-
- if (ar->tx_stats[queue].len < AR9170_NUM_TX_LIMIT_SOFT) {
-#ifdef AR9170_QUEUE_STOP_DEBUG
- wiphy_debug(ar->hw->wiphy, "wake queue %d\n", queue);
- __ar9170_dump_txstats(ar);
-#endif /* AR9170_QUEUE_STOP_DEBUG */
- ieee80211_wake_queue(ar->hw, queue);
- }
- spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-
- if (info->flags & IEEE80211_TX_CTL_NO_ACK) {
- ar9170_tx_status(ar, skb, AR9170_TX_STATUS_FAILED);
- } else {
- arinfo->timeout = jiffies +
- msecs_to_jiffies(AR9170_TX_TIMEOUT);
-
- skb_queue_tail(&ar->tx_status[queue], skb);
- }
-
- if (!ar->tx_stats[queue].len &&
- !skb_queue_empty(&ar->tx_pending[queue])) {
- ar9170_tx(ar);
- }
-}
-
-static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar,
- const u8 *mac,
- struct sk_buff_head *queue,
- const u32 rate)
-{
- unsigned long flags;
- struct sk_buff *skb;
-
- /*
- * Unfortunately, the firmware does not tell to which (queued) frame
- * this transmission status report belongs to.
- *
- * So we have to make risky guesses - with the scarce information
- * the firmware provided (-> destination MAC, and phy_control) -
- * and hope that we picked the right one...
- */
-
- spin_lock_irqsave(&queue->lock, flags);
- skb_queue_walk(queue, skb) {
- struct ar9170_tx_control *txc = (void *) skb->data;
- struct ieee80211_hdr *hdr = (void *) txc->frame_data;
- u32 r;
-
- if (mac && compare_ether_addr(ieee80211_get_DA(hdr), mac)) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "skip frame => DA %pM != %pM\n",
- mac, ieee80211_get_DA(hdr));
- ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
- continue;
- }
-
- r = (le32_to_cpu(txc->phy_control) & AR9170_TX_PHY_MCS_MASK) >>
- AR9170_TX_PHY_MCS_SHIFT;
-
- if ((rate != AR9170_TX_INVALID_RATE) && (r != rate)) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "skip frame => rate %d != %d\n", rate, r);
- ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
- continue;
- }
-
- __skb_unlink(skb, queue);
- spin_unlock_irqrestore(&queue->lock, flags);
- return skb;
- }
-
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_err(ar->hw->wiphy,
- "ESS:[%pM] does not have any outstanding frames in queue.\n",
- mac);
- __ar9170_dump_txqueue(ar, queue);
-#endif /* AR9170_QUEUE_DEBUG */
- spin_unlock_irqrestore(&queue->lock, flags);
-
- return NULL;
-}
-
-/*
- * This worker tries to keeps an maintain tx_status queues.
- * So we can guarantee that incoming tx_status reports are
- * actually for a pending frame.
- */
-
-static void ar9170_tx_janitor(struct work_struct *work)
-{
- struct ar9170 *ar = container_of(work, struct ar9170,
- tx_janitor.work);
- struct sk_buff_head waste;
- unsigned int i;
- bool resched = false;
-
- if (unlikely(!IS_STARTED(ar)))
- return ;
-
- skb_queue_head_init(&waste);
-
- for (i = 0; i < __AR9170_NUM_TXQ; i++) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy, "garbage collector scans queue:%d\n",
- i);
- ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
- ar9170_dump_txqueue(ar, &ar->tx_status[i]);
-#endif /* AR9170_QUEUE_DEBUG */
-
- ar9170_recycle_expired(ar, &ar->tx_status[i], &waste);
- ar9170_recycle_expired(ar, &ar->tx_pending[i], &waste);
- skb_queue_purge(&waste);
-
- if (!skb_queue_empty(&ar->tx_status[i]) ||
- !skb_queue_empty(&ar->tx_pending[i]))
- resched = true;
- }
-
- if (!resched)
- return;
-
- ieee80211_queue_delayed_work(ar->hw,
- &ar->tx_janitor,
- msecs_to_jiffies(AR9170_JANITOR_DELAY));
-}
-
-void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
-{
- struct ar9170_cmd_response *cmd = (void *) buf;
-
- if ((cmd->type & 0xc0) != 0xc0) {
- ar->callback_cmd(ar, len, buf);
- return;
- }
-
- /* hardware event handlers */
- switch (cmd->type) {
- case 0xc1: {
- /*
- * TX status notification:
- * bytes: 0c c1 XX YY M1 M2 M3 M4 M5 M6 R4 R3 R2 R1 S2 S1
- *
- * XX always 81
- * YY always 00
- * M1-M6 is the MAC address
- * R1-R4 is the transmit rate
- * S1-S2 is the transmit status
- */
-
- struct sk_buff *skb;
- u32 phy = le32_to_cpu(cmd->tx_status.rate);
- u32 q = (phy & AR9170_TX_PHY_QOS_MASK) >>
- AR9170_TX_PHY_QOS_SHIFT;
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "recv tx_status for %pm, p:%08x, q:%d\n",
- cmd->tx_status.dst, phy, q);
-#endif /* AR9170_QUEUE_DEBUG */
-
- skb = ar9170_get_queued_skb(ar, cmd->tx_status.dst,
- &ar->tx_status[q],
- AR9170_TX_INVALID_RATE);
- if (unlikely(!skb))
- return ;
-
- ar9170_tx_status(ar, skb, le16_to_cpu(cmd->tx_status.status));
- break;
- }
-
- case 0xc0:
- /*
- * pre-TBTT event
- */
- if (ar->vif && ar->vif->type == NL80211_IFTYPE_AP)
- ieee80211_queue_work(ar->hw, &ar->beacon_work);
- break;
-
- case 0xc2:
- /*
- * (IBSS) beacon send notification
- * bytes: 04 c2 XX YY B4 B3 B2 B1
- *
- * XX always 80
- * YY always 00
- * B1-B4 "should" be the number of send out beacons.
- */
- break;
-
- case 0xc3:
- /* End of Atim Window */
- break;
-
- case 0xc4:
- /* BlockACK bitmap */
- break;
-
- case 0xc5:
- /* BlockACK events */
- break;
-
- case 0xc6:
- /* Watchdog Interrupt */
- break;
-
- case 0xc9:
- /* retransmission issue / SIFS/EIFS collision ?! */
- break;
-
- /* firmware debug */
- case 0xca:
- printk(KERN_DEBUG "ar9170 FW: %.*s\n", len - 4,
- (char *)buf + 4);
- break;
- case 0xcb:
- len -= 4;
-
- switch (len) {
- case 1:
- printk(KERN_DEBUG "ar9170 FW: u8: %#.2x\n",
- *((char *)buf + 4));
- break;
- case 2:
- printk(KERN_DEBUG "ar9170 FW: u8: %#.4x\n",
- le16_to_cpup((__le16 *)((char *)buf + 4)));
- break;
- case 4:
- printk(KERN_DEBUG "ar9170 FW: u8: %#.8x\n",
- le32_to_cpup((__le32 *)((char *)buf + 4)));
- break;
- case 8:
- printk(KERN_DEBUG "ar9170 FW: u8: %#.16lx\n",
- (unsigned long)le64_to_cpup(
- (__le64 *)((char *)buf + 4)));
- break;
- }
- break;
- case 0xcc:
- print_hex_dump_bytes("ar9170 FW:", DUMP_PREFIX_NONE,
- (char *)buf + 4, len - 4);
- break;
-
- default:
- pr_info("received unhandled event %x\n", cmd->type);
- print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
- break;
- }
-}
-
-static void ar9170_rx_reset_rx_mpdu(struct ar9170 *ar)
-{
- memset(&ar->rx_mpdu.plcp, 0, sizeof(struct ar9170_rx_head));
- ar->rx_mpdu.has_plcp = false;
-}
-
-int ar9170_nag_limiter(struct ar9170 *ar)
-{
- bool print_message;
-
- /*
- * we expect all sorts of errors in promiscuous mode.
- * don't bother with it, it's OK!
- */
- if (ar->sniffer_enabled)
- return false;
-
- /*
- * only go for frequent errors! The hardware tends to
- * do some stupid thing once in a while under load, in
- * noisy environments or just for fun!
- */
- if (time_before(jiffies, ar->bad_hw_nagger) && net_ratelimit())
- print_message = true;
- else
- print_message = false;
-
- /* reset threshold for "once in a while" */
- ar->bad_hw_nagger = jiffies + HZ / 4;
- return print_message;
-}
-
-static int ar9170_rx_mac_status(struct ar9170 *ar,
- struct ar9170_rx_head *head,
- struct ar9170_rx_macstatus *mac,
- struct ieee80211_rx_status *status)
-{
- u8 error, decrypt;
-
- BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12);
- BUILD_BUG_ON(sizeof(struct ar9170_rx_macstatus) != 4);
-
- error = mac->error;
- if (error & AR9170_RX_ERROR_MMIC) {
- status->flag |= RX_FLAG_MMIC_ERROR;
- error &= ~AR9170_RX_ERROR_MMIC;
- }
-
- if (error & AR9170_RX_ERROR_PLCP) {
- status->flag |= RX_FLAG_FAILED_PLCP_CRC;
- error &= ~AR9170_RX_ERROR_PLCP;
-
- if (!(ar->filter_state & FIF_PLCPFAIL))
- return -EINVAL;
- }
-
- if (error & AR9170_RX_ERROR_FCS) {
- status->flag |= RX_FLAG_FAILED_FCS_CRC;
- error &= ~AR9170_RX_ERROR_FCS;
-
- if (!(ar->filter_state & FIF_FCSFAIL))
- return -EINVAL;
- }
-
- decrypt = ar9170_get_decrypt_type(mac);
- if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
- decrypt != AR9170_ENC_ALG_NONE)
- status->flag |= RX_FLAG_DECRYPTED;
-
- /* ignore wrong RA errors */
- error &= ~AR9170_RX_ERROR_WRONG_RA;
-
- if (error & AR9170_RX_ERROR_DECRYPT) {
- error &= ~AR9170_RX_ERROR_DECRYPT;
- /*
- * Rx decryption is done in place,
- * the original data is lost anyway.
- */
-
- return -EINVAL;
- }
-
- /* drop any other error frames */
- if (unlikely(error)) {
- /* TODO: update netdevice's RX dropped/errors statistics */
-
- if (ar9170_nag_limiter(ar))
- wiphy_debug(ar->hw->wiphy,
- "received frame with suspicious error code (%#x).\n",
- error);
-
- return -EINVAL;
- }
-
- status->band = ar->channel->band;
- status->freq = ar->channel->center_freq;
-
- switch (mac->status & AR9170_RX_STATUS_MODULATION_MASK) {
- case AR9170_RX_STATUS_MODULATION_CCK:
- if (mac->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
- status->flag |= RX_FLAG_SHORTPRE;
- switch (head->plcp[0]) {
- case 0x0a:
- status->rate_idx = 0;
- break;
- case 0x14:
- status->rate_idx = 1;
- break;
- case 0x37:
- status->rate_idx = 2;
- break;
- case 0x6e:
- status->rate_idx = 3;
- break;
- default:
- if (ar9170_nag_limiter(ar))
- wiphy_err(ar->hw->wiphy,
- "invalid plcp cck rate (%x).\n",
- head->plcp[0]);
- return -EINVAL;
- }
- break;
-
- case AR9170_RX_STATUS_MODULATION_DUPOFDM:
- case AR9170_RX_STATUS_MODULATION_OFDM:
- switch (head->plcp[0] & 0xf) {
- case 0xb:
- status->rate_idx = 0;
- break;
- case 0xf:
- status->rate_idx = 1;
- break;
- case 0xa:
- status->rate_idx = 2;
- break;
- case 0xe:
- status->rate_idx = 3;
- break;
- case 0x9:
- status->rate_idx = 4;
- break;
- case 0xd:
- status->rate_idx = 5;
- break;
- case 0x8:
- status->rate_idx = 6;
- break;
- case 0xc:
- status->rate_idx = 7;
- break;
- default:
- if (ar9170_nag_limiter(ar))
- wiphy_err(ar->hw->wiphy,
- "invalid plcp ofdm rate (%x).\n",
- head->plcp[0]);
- return -EINVAL;
- }
- if (status->band == IEEE80211_BAND_2GHZ)
- status->rate_idx += 4;
- break;
-
- case AR9170_RX_STATUS_MODULATION_HT:
- if (head->plcp[3] & 0x80)
- status->flag |= RX_FLAG_40MHZ;
- if (head->plcp[6] & 0x80)
- status->flag |= RX_FLAG_SHORT_GI;
-
- status->rate_idx = clamp(0, 75, head->plcp[6] & 0x7f);
- status->flag |= RX_FLAG_HT;
- break;
-
- default:
- if (ar9170_nag_limiter(ar))
- wiphy_err(ar->hw->wiphy, "invalid modulation\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void ar9170_rx_phy_status(struct ar9170 *ar,
- struct ar9170_rx_phystatus *phy,
- struct ieee80211_rx_status *status)
-{
- int i;
-
- BUILD_BUG_ON(sizeof(struct ar9170_rx_phystatus) != 20);
-
- for (i = 0; i < 3; i++)
- if (phy->rssi[i] != 0x80)
- status->antenna |= BIT(i);
-
- /* post-process RSSI */
- for (i = 0; i < 7; i++)
- if (phy->rssi[i] & 0x80)
- phy->rssi[i] = ((phy->rssi[i] & 0x7f) + 1) & 0x7f;
-
- /* TODO: we could do something with phy_errors */
- status->signal = ar->noise[0] + phy->rssi_combined;
-}
-
-static struct sk_buff *ar9170_rx_copy_data(u8 *buf, int len)
-{
- struct sk_buff *skb;
- int reserved = 0;
- struct ieee80211_hdr *hdr = (void *) buf;
-
- if (ieee80211_is_data_qos(hdr->frame_control)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- reserved += NET_IP_ALIGN;
-
- if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
- reserved += NET_IP_ALIGN;
- }
-
- if (ieee80211_has_a4(hdr->frame_control))
- reserved += NET_IP_ALIGN;
-
- reserved = 32 + (reserved & NET_IP_ALIGN);
-
- skb = dev_alloc_skb(len + reserved);
- if (likely(skb)) {
- skb_reserve(skb, reserved);
- memcpy(skb_put(skb, len), buf, len);
- }
-
- return skb;
-}
-
-/*
- * If the frame alignment is right (or the kernel has
- * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
- * is only a single MPDU in the USB frame, then we could
- * submit to mac80211 the SKB directly. However, since
- * there may be multiple packets in one SKB in stream
- * mode, and we need to observe the proper ordering,
- * this is non-trivial.
- */
-
-static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
-{
- struct ar9170_rx_head *head;
- struct ar9170_rx_macstatus *mac;
- struct ar9170_rx_phystatus *phy = NULL;
- struct ieee80211_rx_status status;
- struct sk_buff *skb;
- int mpdu_len;
-
- if (unlikely(!IS_STARTED(ar) || len < (sizeof(*mac))))
- return ;
-
- /* Received MPDU */
- mpdu_len = len - sizeof(*mac);
-
- mac = (void *)(buf + mpdu_len);
- if (unlikely(mac->error & AR9170_RX_ERROR_FATAL)) {
- /* this frame is too damaged and can't be used - drop it */
-
- return ;
- }
-
- switch (mac->status & AR9170_RX_STATUS_MPDU_MASK) {
- case AR9170_RX_STATUS_MPDU_FIRST:
- /* first mpdu packet has the plcp header */
- if (likely(mpdu_len >= sizeof(struct ar9170_rx_head))) {
- head = (void *) buf;
- memcpy(&ar->rx_mpdu.plcp, (void *) buf,
- sizeof(struct ar9170_rx_head));
-
- mpdu_len -= sizeof(struct ar9170_rx_head);
- buf += sizeof(struct ar9170_rx_head);
- ar->rx_mpdu.has_plcp = true;
- } else {
- if (ar9170_nag_limiter(ar))
- wiphy_err(ar->hw->wiphy,
- "plcp info is clipped.\n");
- return ;
- }
- break;
-
- case AR9170_RX_STATUS_MPDU_LAST:
- /* last mpdu has a extra tail with phy status information */
-
- if (likely(mpdu_len >= sizeof(struct ar9170_rx_phystatus))) {
- mpdu_len -= sizeof(struct ar9170_rx_phystatus);
- phy = (void *)(buf + mpdu_len);
- } else {
- if (ar9170_nag_limiter(ar))
- wiphy_err(ar->hw->wiphy,
- "frame tail is clipped.\n");
- return ;
- }
-
- case AR9170_RX_STATUS_MPDU_MIDDLE:
- /* middle mpdus are just data */
- if (unlikely(!ar->rx_mpdu.has_plcp)) {
- if (!ar9170_nag_limiter(ar))
- return ;
-
- wiphy_err(ar->hw->wiphy,
- "rx stream did not start with a first_mpdu frame tag.\n");
-
- return ;
- }
-
- head = &ar->rx_mpdu.plcp;
- break;
-
- case AR9170_RX_STATUS_MPDU_SINGLE:
- /* single mpdu - has plcp (head) and phy status (tail) */
- head = (void *) buf;
-
- mpdu_len -= sizeof(struct ar9170_rx_head);
- mpdu_len -= sizeof(struct ar9170_rx_phystatus);
-
- buf += sizeof(struct ar9170_rx_head);
- phy = (void *)(buf + mpdu_len);
- break;
-
- default:
- BUG_ON(1);
- break;
- }
-
- if (unlikely(mpdu_len < FCS_LEN))
- return ;
-
- memset(&status, 0, sizeof(status));
- if (unlikely(ar9170_rx_mac_status(ar, head, mac, &status)))
- return ;
-
- if (phy)
- ar9170_rx_phy_status(ar, phy, &status);
-
- skb = ar9170_rx_copy_data(buf, mpdu_len);
- if (likely(skb)) {
- memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
- ieee80211_rx_irqsafe(ar->hw, skb);
- }
-}
-
-void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
-{
- unsigned int i, tlen, resplen, wlen = 0, clen = 0;
- u8 *tbuf, *respbuf;
-
- tbuf = skb->data;
- tlen = skb->len;
-
- while (tlen >= 4) {
- clen = tbuf[1] << 8 | tbuf[0];
- wlen = ALIGN(clen, 4);
-
- /* check if this is stream has a valid tag.*/
- if (tbuf[2] != 0 || tbuf[3] != 0x4e) {
- /*
- * TODO: handle the highly unlikely event that the
- * corrupted stream has the TAG at the right position.
- */
-
- /* check if the frame can be repaired. */
- if (!ar->rx_failover_missing) {
- /* this is no "short read". */
- if (ar9170_nag_limiter(ar)) {
- wiphy_err(ar->hw->wiphy,
- "missing tag!\n");
- goto err_telluser;
- } else
- goto err_silent;
- }
-
- if (ar->rx_failover_missing > tlen) {
- if (ar9170_nag_limiter(ar)) {
- wiphy_err(ar->hw->wiphy,
- "possible multi stream corruption!\n");
- goto err_telluser;
- } else
- goto err_silent;
- }
-
- memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
- ar->rx_failover_missing -= tlen;
-
- if (ar->rx_failover_missing <= 0) {
- /*
- * nested ar9170_rx call!
- * termination is guaranteed, even when the
- * combined frame also have a element with
- * a bad tag.
- */
-
- ar->rx_failover_missing = 0;
- ar9170_rx(ar, ar->rx_failover);
-
- skb_reset_tail_pointer(ar->rx_failover);
- skb_trim(ar->rx_failover, 0);
- }
-
- return ;
- }
-
- /* check if stream is clipped */
- if (wlen > tlen - 4) {
- if (ar->rx_failover_missing) {
- /* TODO: handle double stream corruption. */
- if (ar9170_nag_limiter(ar)) {
- wiphy_err(ar->hw->wiphy,
- "double rx stream corruption!\n");
- goto err_telluser;
- } else
- goto err_silent;
- }
-
- /*
- * save incomplete data set.
- * the firmware will resend the missing bits when
- * the rx - descriptor comes round again.
- */
-
- memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
- ar->rx_failover_missing = clen - tlen;
- return ;
- }
- resplen = clen;
- respbuf = tbuf + 4;
- tbuf += wlen + 4;
- tlen -= wlen + 4;
-
- i = 0;
-
- /* weird thing, but this is the same in the original driver */
- while (resplen > 2 && i < 12 &&
- respbuf[0] == 0xff && respbuf[1] == 0xff) {
- i += 2;
- resplen -= 2;
- respbuf += 2;
- }
-
- if (resplen < 4)
- continue;
-
- /* found the 6 * 0xffff marker? */
- if (i == 12)
- ar9170_handle_command_response(ar, respbuf, resplen);
- else
- ar9170_handle_mpdu(ar, respbuf, clen);
- }
-
- if (tlen) {
- if (net_ratelimit())
- wiphy_err(ar->hw->wiphy,
- "%d bytes of unprocessed data left in rx stream!\n",
- tlen);
-
- goto err_telluser;
- }
-
- return ;
-
-err_telluser:
- wiphy_err(ar->hw->wiphy,
- "damaged RX stream data [want:%d, data:%d, rx:%d, pending:%d ]\n",
- clen, wlen, tlen, ar->rx_failover_missing);
-
- if (ar->rx_failover_missing)
- print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET,
- ar->rx_failover->data,
- ar->rx_failover->len);
-
- print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET,
- skb->data, skb->len);
-
- wiphy_err(ar->hw->wiphy,
- "If you see this message frequently, please check your hardware and cables.\n");
-
-err_silent:
- if (ar->rx_failover_missing) {
- skb_reset_tail_pointer(ar->rx_failover);
- skb_trim(ar->rx_failover, 0);
- ar->rx_failover_missing = 0;
- }
-}
-
-#define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop) \
-do { \
- queue.aifs = ai_fs; \
- queue.cw_min = cwmin; \
- queue.cw_max = cwmax; \
- queue.txop = _txop; \
-} while (0)
-
-static int ar9170_op_start(struct ieee80211_hw *hw)
-{
- struct ar9170 *ar = hw->priv;
- int err, i;
-
- mutex_lock(&ar->mutex);
-
- /* reinitialize queues statistics */
- memset(&ar->tx_stats, 0, sizeof(ar->tx_stats));
- for (i = 0; i < __AR9170_NUM_TXQ; i++)
- ar->tx_stats[i].limit = AR9170_TXQ_DEPTH;
-
- /* reset QoS defaults */
- AR9170_FILL_QUEUE(ar->edcf[0], 3, 15, 1023, 0); /* BEST EFFORT*/
- AR9170_FILL_QUEUE(ar->edcf[1], 7, 15, 1023, 0); /* BACKGROUND */
- AR9170_FILL_QUEUE(ar->edcf[2], 2, 7, 15, 94); /* VIDEO */
- AR9170_FILL_QUEUE(ar->edcf[3], 2, 3, 7, 47); /* VOICE */
- AR9170_FILL_QUEUE(ar->edcf[4], 2, 3, 7, 0); /* SPECIAL */
-
- /* set sane AMPDU defaults */
- ar->global_ampdu_density = 6;
- ar->global_ampdu_factor = 3;
-
- ar->bad_hw_nagger = jiffies;
-
- err = ar->open(ar);
- if (err)
- goto out;
-
- err = ar9170_init_mac(ar);
- if (err)
- goto out;
-
- err = ar9170_set_qos(ar);
- if (err)
- goto out;
-
- err = ar9170_init_phy(ar, IEEE80211_BAND_2GHZ);
- if (err)
- goto out;
-
- err = ar9170_init_rf(ar);
- if (err)
- goto out;
-
- /* start DMA */
- err = ar9170_write_reg(ar, 0x1c3d30, 0x100);
- if (err)
- goto out;
-
- ar->state = AR9170_STARTED;
-
-out:
- mutex_unlock(&ar->mutex);
- return err;
-}
-
-static void ar9170_op_stop(struct ieee80211_hw *hw)
-{
- struct ar9170 *ar = hw->priv;
- unsigned int i;
-
- if (IS_STARTED(ar))
- ar->state = AR9170_IDLE;
-
- cancel_delayed_work_sync(&ar->tx_janitor);
-#ifdef CONFIG_AR9170_LEDS
- cancel_delayed_work_sync(&ar->led_work);
-#endif
- cancel_work_sync(&ar->beacon_work);
-
- mutex_lock(&ar->mutex);
-
- if (IS_ACCEPTING_CMD(ar)) {
- ar9170_set_leds_state(ar, 0);
-
- /* stop DMA */
- ar9170_write_reg(ar, 0x1c3d30, 0);
- ar->stop(ar);
- }
-
- for (i = 0; i < __AR9170_NUM_TXQ; i++) {
- skb_queue_purge(&ar->tx_pending[i]);
- skb_queue_purge(&ar->tx_status[i]);
- }
-
- mutex_unlock(&ar->mutex);
-}
-
-static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
-{
- struct ieee80211_hdr *hdr;
- struct ar9170_tx_control *txc;
- struct ieee80211_tx_info *info;
- struct ieee80211_tx_rate *txrate;
- struct ar9170_tx_info *arinfo;
- unsigned int queue = skb_get_queue_mapping(skb);
- u16 keytype = 0;
- u16 len, icv = 0;
-
- BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
-
- hdr = (void *)skb->data;
- info = IEEE80211_SKB_CB(skb);
- len = skb->len;
-
- txc = (void *)skb_push(skb, sizeof(*txc));
-
- if (info->control.hw_key) {
- icv = info->control.hw_key->icv_len;
-
- switch (info->control.hw_key->cipher) {
- case WLAN_CIPHER_SUITE_WEP40:
- case WLAN_CIPHER_SUITE_WEP104:
- case WLAN_CIPHER_SUITE_TKIP:
- keytype = AR9170_TX_MAC_ENCR_RC4;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
- keytype = AR9170_TX_MAC_ENCR_AES;
- break;
- default:
- WARN_ON(1);
- goto err_out;
- }
- }
-
- /* Length */
- txc->length = cpu_to_le16(len + icv + 4);
-
- txc->mac_control = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
- AR9170_TX_MAC_BACKOFF);
- txc->mac_control |= cpu_to_le16(ar9170_qos_hwmap[queue] <<
- AR9170_TX_MAC_QOS_SHIFT);
- txc->mac_control |= cpu_to_le16(keytype);
- txc->phy_control = cpu_to_le32(0);
-
- if (info->flags & IEEE80211_TX_CTL_NO_ACK)
- txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK);
-
- txrate = &info->control.rates[0];
- if (txrate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
- txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
- else if (txrate->flags & IEEE80211_TX_RC_USE_RTS_CTS)
- txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
-
- arinfo = (void *)info->rate_driver_data;
- arinfo->timeout = jiffies + msecs_to_jiffies(AR9170_QUEUE_TIMEOUT);
-
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (is_valid_ether_addr(ieee80211_get_DA(hdr)))) {
- /*
- * WARNING:
- * Putting the QoS queue bits into an unexplored territory is
- * certainly not elegant.
- *
- * In my defense: This idea provides a reasonable way to
- * smuggle valuable information to the tx_status callback.
- * Also, the idea behind this bit-abuse came straight from
- * the original driver code.
- */
-
- txc->phy_control |=
- cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
-
- txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
- }
-
- return 0;
-
-err_out:
- skb_pull(skb, sizeof(*txc));
- return -EINVAL;
-}
-
-static void ar9170_tx_prepare_phy(struct ar9170 *ar, struct sk_buff *skb)
-{
- struct ar9170_tx_control *txc;
- struct ieee80211_tx_info *info;
- struct ieee80211_rate *rate = NULL;
- struct ieee80211_tx_rate *txrate;
- u32 power, chains;
-
- txc = (void *) skb->data;
- info = IEEE80211_SKB_CB(skb);
- txrate = &info->control.rates[0];
-
- if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
- txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD);
-
- if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
- txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE);
-
- if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
- txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ);
- /* this works because 40 MHz is 2 and dup is 3 */
- if (txrate->flags & IEEE80211_TX_RC_DUP_DATA)
- txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP);
-
- if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
- txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI);
-
- if (txrate->flags & IEEE80211_TX_RC_MCS) {
- u32 r = txrate->idx;
- u8 *txpower;
-
- /* heavy clip control */
- txc->phy_control |= cpu_to_le32((r & 0x7) << 7);
-
- r <<= AR9170_TX_PHY_MCS_SHIFT;
- BUG_ON(r & ~AR9170_TX_PHY_MCS_MASK);
-
- txc->phy_control |= cpu_to_le32(r & AR9170_TX_PHY_MCS_MASK);
- txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_MOD_HT);
-
- if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) {
- if (info->band == IEEE80211_BAND_5GHZ)
- txpower = ar->power_5G_ht40;
- else
- txpower = ar->power_2G_ht40;
- } else {
- if (info->band == IEEE80211_BAND_5GHZ)
- txpower = ar->power_5G_ht20;
- else
- txpower = ar->power_2G_ht20;
- }
-
- power = txpower[(txrate->idx) & 7];
- } else {
- u8 *txpower;
- u32 mod;
- u32 phyrate;
- u8 idx = txrate->idx;
-
- if (info->band != IEEE80211_BAND_2GHZ) {
- idx += 4;
- txpower = ar->power_5G_leg;
- mod = AR9170_TX_PHY_MOD_OFDM;
- } else {
- if (idx < 4) {
- txpower = ar->power_2G_cck;
- mod = AR9170_TX_PHY_MOD_CCK;
- } else {
- mod = AR9170_TX_PHY_MOD_OFDM;
- txpower = ar->power_2G_ofdm;
- }
- }
-
- rate = &__ar9170_ratetable[idx];
-
- phyrate = rate->hw_value & 0xF;
- power = txpower[(rate->hw_value & 0x30) >> 4];
- phyrate <<= AR9170_TX_PHY_MCS_SHIFT;
-
- txc->phy_control |= cpu_to_le32(mod);
- txc->phy_control |= cpu_to_le32(phyrate);
- }
-
- power <<= AR9170_TX_PHY_TX_PWR_SHIFT;
- power &= AR9170_TX_PHY_TX_PWR_MASK;
- txc->phy_control |= cpu_to_le32(power);
-
- /* set TX chains */
- if (ar->eeprom.tx_mask == 1) {
- chains = AR9170_TX_PHY_TXCHAIN_1;
- } else {
- chains = AR9170_TX_PHY_TXCHAIN_2;
-
- /* >= 36M legacy OFDM - use only one chain */
- if (rate && rate->bitrate >= 360)
- chains = AR9170_TX_PHY_TXCHAIN_1;
- }
- txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT);
-}
-
-static void ar9170_tx(struct ar9170 *ar)
-{
- struct sk_buff *skb;
- unsigned long flags;
- struct ieee80211_tx_info *info;
- struct ar9170_tx_info *arinfo;
- unsigned int i, frames, frames_failed, remaining_space;
- int err;
- bool schedule_garbagecollector = false;
-
- BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
-
- if (unlikely(!IS_STARTED(ar)))
- return ;
-
- remaining_space = AR9170_TX_MAX_PENDING;
-
- for (i = 0; i < __AR9170_NUM_TXQ; i++) {
- spin_lock_irqsave(&ar->tx_stats_lock, flags);
- frames = min(ar->tx_stats[i].limit - ar->tx_stats[i].len,
- skb_queue_len(&ar->tx_pending[i]));
-
- if (remaining_space < frames) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "tx quota reached queue:%d, "
- "remaining slots:%d, needed:%d\n",
- i, remaining_space, frames);
-#endif /* AR9170_QUEUE_DEBUG */
- frames = remaining_space;
- }
-
- ar->tx_stats[i].len += frames;
- ar->tx_stats[i].count += frames;
- if (ar->tx_stats[i].len >= ar->tx_stats[i].limit) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy, "queue %d full\n", i);
- wiphy_debug(ar->hw->wiphy, "stuck frames: ===>\n");
- ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
- ar9170_dump_txqueue(ar, &ar->tx_status[i]);
-#endif /* AR9170_QUEUE_DEBUG */
-
-#ifdef AR9170_QUEUE_STOP_DEBUG
- wiphy_debug(ar->hw->wiphy, "stop queue %d\n", i);
- __ar9170_dump_txstats(ar);
-#endif /* AR9170_QUEUE_STOP_DEBUG */
- ieee80211_stop_queue(ar->hw, i);
- }
-
- spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-
- if (!frames)
- continue;
-
- frames_failed = 0;
- while (frames) {
- skb = skb_dequeue(&ar->tx_pending[i]);
- if (unlikely(!skb)) {
- frames_failed += frames;
- frames = 0;
- break;
- }
-
- info = IEEE80211_SKB_CB(skb);
- arinfo = (void *) info->rate_driver_data;
-
- /* TODO: cancel stuck frames */
- arinfo->timeout = jiffies +
- msecs_to_jiffies(AR9170_TX_TIMEOUT);
-
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy, "send frame q:%d =>\n", i);
- ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
-
- err = ar->tx(ar, skb);
- if (unlikely(err)) {
- frames_failed++;
- dev_kfree_skb_any(skb);
- } else {
- remaining_space--;
- schedule_garbagecollector = true;
- }
-
- frames--;
- }
-
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "ar9170_tx report for queue %d\n", i);
-
- wiphy_debug(ar->hw->wiphy,
- "unprocessed pending frames left:\n");
- ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
-#endif /* AR9170_QUEUE_DEBUG */
-
- if (unlikely(frames_failed)) {
-#ifdef AR9170_QUEUE_DEBUG
- wiphy_debug(ar->hw->wiphy,
- "frames failed %d =>\n", frames_failed);
-#endif /* AR9170_QUEUE_DEBUG */
-
- spin_lock_irqsave(&ar->tx_stats_lock, flags);
- ar->tx_stats[i].len -= frames_failed;
- ar->tx_stats[i].count -= frames_failed;
-#ifdef AR9170_QUEUE_STOP_DEBUG
- wiphy_debug(ar->hw->wiphy, "wake queue %d\n", i);
- __ar9170_dump_txstats(ar);
-#endif /* AR9170_QUEUE_STOP_DEBUG */
- ieee80211_wake_queue(ar->hw, i);
- spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
- }
- }
-
- if (!schedule_garbagecollector)
- return;
-
- ieee80211_queue_delayed_work(ar->hw,
- &ar->tx_janitor,
- msecs_to_jiffies(AR9170_JANITOR_DELAY));
-}
-
-void ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct ar9170 *ar = hw->priv;
- struct ieee80211_tx_info *info;
- unsigned int queue;
-
- if (unlikely(!IS_STARTED(ar)))
- goto err_free;
-
- if (unlikely(ar9170_tx_prepare(ar, skb)))
- goto err_free;
-
- queue = skb_get_queue_mapping(skb);
- info = IEEE80211_SKB_CB(skb);
- ar9170_tx_prepare_phy(ar, skb);
- skb_queue_tail(&ar->tx_pending[queue], skb);
-
- ar9170_tx(ar);
- return;
-
-err_free:
- dev_kfree_skb_any(skb);
-}
-
-static int ar9170_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct ar9170 *ar = hw->priv;
- struct ath_common *common = &ar->common;
- int err = 0;
-
- mutex_lock(&ar->mutex);
-
- if (ar->vif) {
- err = -EBUSY;
- goto unlock;
- }
-
- ar->vif = vif;
- memcpy(common->macaddr, vif->addr, ETH_ALEN);
-
- if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
- ar->rx_software_decryption = true;
- ar->disable_offload = true;
- }
-
- ar->cur_filter = 0;
- err = ar9170_update_frame_filter(ar, AR9170_MAC_REG_FTF_DEFAULTS);
- if (err)
- goto unlock;
-
- err = ar9170_set_operating_mode(ar);
-
-unlock:
- mutex_unlock(&ar->mutex);
- return err;
-}
-
-static void ar9170_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct ar9170 *ar = hw->priv;
-
- mutex_lock(&ar->mutex);
- ar->vif = NULL;
- ar9170_update_frame_filter(ar, 0);
- ar9170_set_beacon_timers(ar);
- dev_kfree_skb(ar->beacon);
- ar->beacon = NULL;
- ar->sniffer_enabled = false;
- ar->rx_software_decryption = false;
- ar9170_set_operating_mode(ar);
- mutex_unlock(&ar->mutex);
-}
-
-static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct ar9170 *ar = hw->priv;
- int err = 0;
-
- mutex_lock(&ar->mutex);
-
- if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
- /* TODO */
- err = 0;
- }
-
- if (changed & IEEE80211_CONF_CHANGE_PS) {
- /* TODO */
- err = 0;
- }
-
- if (changed & IEEE80211_CONF_CHANGE_POWER) {
- /* TODO */
- err = 0;
- }
-
- if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
- /*
- * is it long_frame_max_tx_count or short_frame_max_tx_count?
- */
-
- err = ar9170_set_hwretry_limit(ar,
- ar->hw->conf.long_frame_max_tx_count);
- if (err)
- goto out;
- }
-
- if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-
- /* adjust slot time for 5 GHz */
- err = ar9170_set_slot_time(ar);
- if (err)
- goto out;
-
- err = ar9170_set_dyn_sifs_ack(ar);
- if (err)
- goto out;
-
- err = ar9170_set_channel(ar, hw->conf.channel,
- AR9170_RFI_NONE,
- nl80211_to_ar9170(hw->conf.channel_type));
- if (err)
- goto out;
- }
-
-out:
- mutex_unlock(&ar->mutex);
- return err;
-}
-
-static u64 ar9170_op_prepare_multicast(struct ieee80211_hw *hw,
- struct netdev_hw_addr_list *mc_list)
-{
- u64 mchash;
- struct netdev_hw_addr *ha;
-
- /* always get broadcast frames */
- mchash = 1ULL << (0xff >> 2);
-
- netdev_hw_addr_list_for_each(ha, mc_list)
- mchash |= 1ULL << (ha->addr[5] >> 2);
-
- return mchash;
-}
-
-static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *new_flags,
- u64 multicast)
-{
- struct ar9170 *ar = hw->priv;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return ;
-
- mutex_lock(&ar->mutex);
-
- /* mask supported flags */
- *new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC |
- FIF_PROMISC_IN_BSS | FIF_FCSFAIL | FIF_PLCPFAIL;
- ar->filter_state = *new_flags;
- /*
- * We can support more by setting the sniffer bit and
- * then checking the error flags, later.
- */
-
- if (changed_flags & FIF_ALLMULTI && *new_flags & FIF_ALLMULTI)
- multicast = ~0ULL;
-
- if (multicast != ar->cur_mc_hash)
- ar9170_update_multicast(ar, multicast);
-
- if (changed_flags & FIF_CONTROL) {
- u32 filter = AR9170_MAC_REG_FTF_PSPOLL |
- AR9170_MAC_REG_FTF_RTS |
- AR9170_MAC_REG_FTF_CTS |
- AR9170_MAC_REG_FTF_ACK |
- AR9170_MAC_REG_FTF_CFE |
- AR9170_MAC_REG_FTF_CFE_ACK;
-
- if (*new_flags & FIF_CONTROL)
- filter |= ar->cur_filter;
- else
- filter &= (~ar->cur_filter);
-
- ar9170_update_frame_filter(ar, filter);
- }
-
- if (changed_flags & FIF_PROMISC_IN_BSS) {
- ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0;
- ar9170_set_operating_mode(ar);
- }
-
- mutex_unlock(&ar->mutex);
-}
-
-
-static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changed)
-{
- struct ar9170 *ar = hw->priv;
- struct ath_common *common = &ar->common;
- int err = 0;
-
- mutex_lock(&ar->mutex);
-
- if (changed & BSS_CHANGED_BSSID) {
- memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
- err = ar9170_set_operating_mode(ar);
- if (err)
- goto out;
- }
-
- if (changed & BSS_CHANGED_BEACON_ENABLED)
- ar->enable_beacon = bss_conf->enable_beacon;
-
- if (changed & BSS_CHANGED_BEACON) {
- err = ar9170_update_beacon(ar);
- if (err)
- goto out;
- }
-
- if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON |
- BSS_CHANGED_BEACON_INT)) {
- err = ar9170_set_beacon_timers(ar);
- if (err)
- goto out;
- }
-
- if (changed & BSS_CHANGED_ASSOC) {
-#ifndef CONFIG_AR9170_LEDS
- /* enable assoc LED. */
- err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0);
-#endif /* CONFIG_AR9170_LEDS */
- }
-
- if (changed & BSS_CHANGED_HT) {
- /* TODO */
- err = 0;
- }
-
- if (changed & BSS_CHANGED_ERP_SLOT) {
- err = ar9170_set_slot_time(ar);
- if (err)
- goto out;
- }
-
- if (changed & BSS_CHANGED_BASIC_RATES) {
- err = ar9170_set_basic_rates(ar);
- if (err)
- goto out;
- }
-
-out:
- mutex_unlock(&ar->mutex);
-}
-
-static u64 ar9170_op_get_tsf(struct ieee80211_hw *hw)
-{
- struct ar9170 *ar = hw->priv;
- int err;
- u64 tsf;
-#define NR 3
- static const u32 addr[NR] = { AR9170_MAC_REG_TSF_H,
- AR9170_MAC_REG_TSF_L,
- AR9170_MAC_REG_TSF_H };
- u32 val[NR];
- int loops = 0;
-
- mutex_lock(&ar->mutex);
-
- while (loops++ < 10) {
- err = ar9170_read_mreg(ar, NR, addr, val);
- if (err || val[0] == val[2])
- break;
- }
-
- mutex_unlock(&ar->mutex);
-
- if (WARN_ON(err))
- return 0;
- tsf = val[0];
- tsf = (tsf << 32) | val[1];
- return tsf;
-#undef NR
-}
-
-static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct ar9170 *ar = hw->priv;
- int err = 0, i;
- u8 ktype;
-
- if ((!ar->vif) || (ar->disable_offload))
- return -EOPNOTSUPP;
-
- switch (key->cipher) {
- case WLAN_CIPHER_SUITE_WEP40:
- ktype = AR9170_ENC_ALG_WEP64;
- break;
- case WLAN_CIPHER_SUITE_WEP104:
- ktype = AR9170_ENC_ALG_WEP128;
- break;
- case WLAN_CIPHER_SUITE_TKIP:
- ktype = AR9170_ENC_ALG_TKIP;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
- ktype = AR9170_ENC_ALG_AESCCMP;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- mutex_lock(&ar->mutex);
- if (cmd == SET_KEY) {
- if (unlikely(!IS_STARTED(ar))) {
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* group keys need all-zeroes address */
- if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
- sta = NULL;
-
- if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
- for (i = 0; i < 64; i++)
- if (!(ar->usedkeys & BIT(i)))
- break;
- if (i == 64) {
- ar->rx_software_decryption = true;
- ar9170_set_operating_mode(ar);
- err = -ENOSPC;
- goto out;
- }
- } else {
- i = 64 + key->keyidx;
- }
-
- key->hw_key_idx = i;
-
- err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL, ktype, 0,
- key->key, min_t(u8, 16, key->keylen));
- if (err)
- goto out;
-
- if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
- err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL,
- ktype, 1, key->key + 16, 16);
- if (err)
- goto out;
-
- /*
- * hardware is not capable generating the MMIC
- * for fragmented frames!
- */
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- }
-
- if (i < 64)
- ar->usedkeys |= BIT(i);
-
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- } else {
- if (unlikely(!IS_STARTED(ar))) {
- /* The device is gone... together with the key ;-) */
- err = 0;
- goto out;
- }
-
- err = ar9170_disable_key(ar, key->hw_key_idx);
- if (err)
- goto out;
-
- if (key->hw_key_idx < 64) {
- ar->usedkeys &= ~BIT(key->hw_key_idx);
- } else {
- err = ar9170_upload_key(ar, key->hw_key_idx, NULL,
- AR9170_ENC_ALG_NONE, 0,
- NULL, 0);
- if (err)
- goto out;
-
- if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
- err = ar9170_upload_key(ar, key->hw_key_idx,
- NULL,
- AR9170_ENC_ALG_NONE, 1,
- NULL, 0);
- if (err)
- goto out;
- }
-
- }
- }
-
- ar9170_regwrite_begin(ar);
- ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_L, ar->usedkeys);
- ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_H, ar->usedkeys >> 32);
- ar9170_regwrite_finish();
- err = ar9170_regwrite_result();
-
-out:
- mutex_unlock(&ar->mutex);
-
- return err;
-}
-
-static int ar9170_get_stats(struct ieee80211_hw *hw,
- struct ieee80211_low_level_stats *stats)
-{
- struct ar9170 *ar = hw->priv;
- u32 val;
- int err;
-
- mutex_lock(&ar->mutex);
- err = ar9170_read_reg(ar, AR9170_MAC_REG_TX_RETRY, &val);
- ar->stats.dot11ACKFailureCount += val;
-
- memcpy(stats, &ar->stats, sizeof(*stats));
- mutex_unlock(&ar->mutex);
-
- return 0;
-}
-
-static int ar9170_get_survey(struct ieee80211_hw *hw, int idx,
- struct survey_info *survey)
-{
- struct ar9170 *ar = hw->priv;
- struct ieee80211_conf *conf = &hw->conf;
-
- if (idx != 0)
- return -ENOENT;
-
- /* TODO: update noise value, e.g. call ar9170_set_channel */
-
- survey->channel = conf->channel;
- survey->filled = SURVEY_INFO_NOISE_DBM;
- survey->noise = ar->noise[0];
-
- return 0;
-}
-
-static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
- const struct ieee80211_tx_queue_params *param)
-{
- struct ar9170 *ar = hw->priv;
- int ret;
-
- mutex_lock(&ar->mutex);
- if (queue < __AR9170_NUM_TXQ) {
- memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
- param, sizeof(*param));
-
- ret = ar9170_set_qos(ar);
- } else {
- ret = -EINVAL;
- }
-
- mutex_unlock(&ar->mutex);
- return ret;
-}
-
-static int ar9170_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size)
-{
- switch (action) {
- case IEEE80211_AMPDU_RX_START:
- case IEEE80211_AMPDU_RX_STOP:
- /* Handled by firmware */
- break;
-
- default:
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
-static const struct ieee80211_ops ar9170_ops = {
- .start = ar9170_op_start,
- .stop = ar9170_op_stop,
- .tx = ar9170_op_tx,
- .add_interface = ar9170_op_add_interface,
- .remove_interface = ar9170_op_remove_interface,
- .config = ar9170_op_config,
- .prepare_multicast = ar9170_op_prepare_multicast,
- .configure_filter = ar9170_op_configure_filter,
- .conf_tx = ar9170_conf_tx,
- .bss_info_changed = ar9170_op_bss_info_changed,
- .get_tsf = ar9170_op_get_tsf,
- .set_key = ar9170_set_key,
- .get_stats = ar9170_get_stats,
- .get_survey = ar9170_get_survey,
- .ampdu_action = ar9170_ampdu_action,
-};
-
-void *ar9170_alloc(size_t priv_size)
-{
- struct ieee80211_hw *hw;
- struct ar9170 *ar;
- struct sk_buff *skb;
- int i;
-
- /*
- * this buffer is used for rx stream reconstruction.
- * Under heavy load this device (or the transport layer?)
- * tends to split the streams into separate rx descriptors.
- */
-
- skb = __dev_alloc_skb(AR9170_RX_STREAM_MAX_SIZE, GFP_KERNEL);
- if (!skb)
- goto err_nomem;
-
- hw = ieee80211_alloc_hw(priv_size, &ar9170_ops);
- if (!hw)
- goto err_nomem;
-
- ar = hw->priv;
- ar->hw = hw;
- ar->rx_failover = skb;
-
- mutex_init(&ar->mutex);
- spin_lock_init(&ar->cmdlock);
- spin_lock_init(&ar->tx_stats_lock);
- for (i = 0; i < __AR9170_NUM_TXQ; i++) {
- skb_queue_head_init(&ar->tx_status[i]);
- skb_queue_head_init(&ar->tx_pending[i]);
- }
- ar9170_rx_reset_rx_mpdu(ar);
- INIT_WORK(&ar->beacon_work, ar9170_new_beacon);
- INIT_DELAYED_WORK(&ar->tx_janitor, ar9170_tx_janitor);
-
- /* all hw supports 2.4 GHz, so set channel to 1 by default */
- ar->channel = &ar9170_2ghz_chantable[0];
-
- /* first part of wiphy init */
- ar->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_WDS) |
- BIT(NL80211_IFTYPE_ADHOC);
- ar->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_SIGNAL_DBM;
-
- ar->hw->queues = __AR9170_NUM_TXQ;
- ar->hw->extra_tx_headroom = 8;
-
- ar->hw->max_rates = 1;
- ar->hw->max_rate_tries = 3;
-
- for (i = 0; i < ARRAY_SIZE(ar->noise); i++)
- ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */
-
- return ar;
-
-err_nomem:
- kfree_skb(skb);
- return ERR_PTR(-ENOMEM);
-}
-
-static int ar9170_read_eeprom(struct ar9170 *ar)
-{
-#define RW 8 /* number of words to read at once */
-#define RB (sizeof(u32) * RW)
- struct ath_regulatory *regulatory = &ar->common.regulatory;
- u8 *eeprom = (void *)&ar->eeprom;
- u8 *addr = ar->eeprom.mac_address;
- __le32 offsets[RW];
- unsigned int rx_streams, tx_streams, tx_params = 0;
- int i, j, err, bands = 0;
-
- BUILD_BUG_ON(sizeof(ar->eeprom) & 3);
-
- BUILD_BUG_ON(RB > AR9170_MAX_CMD_LEN - 4);
-#ifndef __CHECKER__
- /* don't want to handle trailing remains */
- BUILD_BUG_ON(sizeof(ar->eeprom) % RB);
-#endif
-
- for (i = 0; i < sizeof(ar->eeprom)/RB; i++) {
- for (j = 0; j < RW; j++)
- offsets[j] = cpu_to_le32(AR9170_EEPROM_START +
- RB * i + 4 * j);
-
- err = ar->exec_cmd(ar, AR9170_CMD_RREG,
- RB, (u8 *) &offsets,
- RB, eeprom + RB * i);
- if (err)
- return err;
- }
-
-#undef RW
-#undef RB
-
- if (ar->eeprom.length == cpu_to_le16(0xFFFF))
- return -ENODATA;
-
- if (ar->eeprom.operating_flags & AR9170_OPFLAG_2GHZ) {
- ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar9170_band_2GHz;
- bands++;
- }
- if (ar->eeprom.operating_flags & AR9170_OPFLAG_5GHZ) {
- ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &ar9170_band_5GHz;
- bands++;
- }
-
- rx_streams = hweight8(ar->eeprom.rx_mask);
- tx_streams = hweight8(ar->eeprom.tx_mask);
-
- if (rx_streams != tx_streams)
- tx_params = IEEE80211_HT_MCS_TX_RX_DIFF;
-
- if (tx_streams >= 1 && tx_streams <= IEEE80211_HT_MCS_TX_MAX_STREAMS)
- tx_params = (tx_streams - 1) <<
- IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
-
- ar9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params;
- ar9170_band_5GHz.ht_cap.mcs.tx_params |= tx_params;
-
- /*
- * I measured this, a bandswitch takes roughly
- * 135 ms and a frequency switch about 80.
- *
- * FIXME: measure these values again once EEPROM settings
- * are used, that will influence them!
- */
- if (bands == 2)
- ar->hw->channel_change_time = 135 * 1000;
- else
- ar->hw->channel_change_time = 80 * 1000;
-
- regulatory->current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]);
- regulatory->current_rd_ext = le16_to_cpu(ar->eeprom.reg_domain[1]);
-
- /* second part of wiphy init */
- SET_IEEE80211_PERM_ADDR(ar->hw, addr);
-
- return bands ? 0 : -EINVAL;
-}
-
-static int ar9170_reg_notifier(struct wiphy *wiphy,
- struct regulatory_request *request)
-{
- struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
- struct ar9170 *ar = hw->priv;
-
- return ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory);
-}
-
-int ar9170_register(struct ar9170 *ar, struct device *pdev)
-{
- struct ath_regulatory *regulatory = &ar->common.regulatory;
- int err;
-
- /* try to read EEPROM, init MAC addr */
- err = ar9170_read_eeprom(ar);
- if (err)
- goto err_out;
-
- err = ath_regd_init(regulatory, ar->hw->wiphy,
- ar9170_reg_notifier);
- if (err)
- goto err_out;
-
- err = ieee80211_register_hw(ar->hw);
- if (err)
- goto err_out;
-
- if (!ath_is_world_regd(regulatory))
- regulatory_hint(ar->hw->wiphy, regulatory->alpha2);
-
- err = ar9170_init_leds(ar);
- if (err)
- goto err_unreg;
-
-#ifdef CONFIG_AR9170_LEDS
- err = ar9170_register_leds(ar);
- if (err)
- goto err_unreg;
-#endif /* CONFIG_AR9170_LEDS */
-
- dev_info(pdev, "Atheros AR9170 is registered as '%s'\n",
- wiphy_name(ar->hw->wiphy));
-
- ar->registered = true;
- return 0;
-
-err_unreg:
- ieee80211_unregister_hw(ar->hw);
-
-err_out:
- return err;
-}
-
-void ar9170_unregister(struct ar9170 *ar)
-{
- if (ar->registered) {
-#ifdef CONFIG_AR9170_LEDS
- ar9170_unregister_leds(ar);
-#endif /* CONFIG_AR9170_LEDS */
-
- ieee80211_unregister_hw(ar->hw);
- }
-
- kfree_skb(ar->rx_failover);
- mutex_destroy(&ar->mutex);
-}
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
deleted file mode 100644
index aa8d06b..0000000
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ /dev/null
@@ -1,1719 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * PHY and RF code
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/bitrev.h>
-#include "ar9170.h"
-#include "cmd.h"
-
-static int ar9170_init_power_cal(struct ar9170 *ar)
-{
- ar9170_regwrite_begin(ar);
-
- ar9170_regwrite(0x1bc000 + 0x993c, 0x7f);
- ar9170_regwrite(0x1bc000 + 0x9934, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0x9938, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa234, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa238, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa38c, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa390, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa3cc, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa3d0, 0x3f3f3f3f);
- ar9170_regwrite(0x1bc000 + 0xa3d4, 0x3f3f3f3f);
-
- ar9170_regwrite_finish();
- return ar9170_regwrite_result();
-}
-
-struct ar9170_phy_init {
- u32 reg, _5ghz_20, _5ghz_40, _2ghz_40, _2ghz_20;
-};
-
-static struct ar9170_phy_init ar5416_phy_init[] = {
- { 0x1c5800, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
- { 0x1c5804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, },
- { 0x1c5808, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c580c, 0xad848e19, 0xad848e19, 0xad848e19, 0xad848e19, },
- { 0x1c5810, 0x7d14e000, 0x7d14e000, 0x7d14e000, 0x7d14e000, },
- { 0x1c5814, 0x9c0a9f6b, 0x9c0a9f6b, 0x9c0a9f6b, 0x9c0a9f6b, },
- { 0x1c5818, 0x00000090, 0x00000090, 0x00000090, 0x00000090, },
- { 0x1c581c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, },
- { 0x1c5824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, },
- { 0x1c5828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, },
- { 0x1c582c, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, },
- { 0x1c5830, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, },
- { 0x1c5838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
- { 0x1c583c, 0x00200400, 0x00200400, 0x00200400, 0x00200400, },
- { 0x1c5840, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e, },
- { 0x1c5844, 0x1372161e, 0x13721c1e, 0x13721c24, 0x137216a4, },
- { 0x1c5848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, },
- { 0x1c584c, 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c, },
- { 0x1c5850, 0x6c48b4e4, 0x6c48b4e4, 0x6c48b0e4, 0x6c48b0e4, },
- { 0x1c5854, 0x00000859, 0x00000859, 0x00000859, 0x00000859, },
- { 0x1c5858, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, },
- { 0x1c585c, 0x31395c5e, 0x31395c5e, 0x31395c5e, 0x31395c5e, },
- { 0x1c5860, 0x0004dd10, 0x0004dd10, 0x0004dd20, 0x0004dd20, },
- { 0x1c5868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, },
- { 0x1c586c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, },
- { 0x1c5900, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5904, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5908, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c590c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, },
- { 0x1c5918, 0x00000118, 0x00000230, 0x00000268, 0x00000134, },
- { 0x1c591c, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff, },
- { 0x1c5920, 0x0510081c, 0x0510081c, 0x0510001c, 0x0510001c, },
- { 0x1c5924, 0xd0058a15, 0xd0058a15, 0xd0058a15, 0xd0058a15, },
- { 0x1c5928, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
- { 0x1c592c, 0x00000004, 0x00000004, 0x00000004, 0x00000004, },
- { 0x1c5934, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c5938, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c593c, 0x0000007f, 0x0000007f, 0x0000007f, 0x0000007f, },
- { 0x1c5944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, },
- { 0x1c5948, 0x9280b212, 0x9280b212, 0x9280b212, 0x9280b212, },
- { 0x1c594c, 0x00020028, 0x00020028, 0x00020028, 0x00020028, },
- { 0x1c5954, 0x5d50e188, 0x5d50e188, 0x5d50e188, 0x5d50e188, },
- { 0x1c5958, 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff, },
- { 0x1c5960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, },
- { 0x1c5964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, },
- { 0x1c5970, 0x190fb515, 0x190fb515, 0x190fb515, 0x190fb515, },
- { 0x1c5974, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5978, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
- { 0x1c597c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5980, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5984, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5988, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c598c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5990, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5994, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5998, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c599c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c59a0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c59a4, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
- { 0x1c59a8, 0x001fff00, 0x001fff00, 0x001fff00, 0x001fff00, },
- { 0x1c59ac, 0x006f00c4, 0x006f00c4, 0x006f00c4, 0x006f00c4, },
- { 0x1c59b0, 0x03051000, 0x03051000, 0x03051000, 0x03051000, },
- { 0x1c59b4, 0x00000820, 0x00000820, 0x00000820, 0x00000820, },
- { 0x1c59c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, },
- { 0x1c59c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, },
- { 0x1c59c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, },
- { 0x1c59cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, },
- { 0x1c59d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, },
- { 0x1c59d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c59d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c59dc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c59e0, 0x00000200, 0x00000200, 0x00000200, 0x00000200, },
- { 0x1c59e4, 0x64646464, 0x64646464, 0x64646464, 0x64646464, },
- { 0x1c59e8, 0x3c787878, 0x3c787878, 0x3c787878, 0x3c787878, },
- { 0x1c59ec, 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa, },
- { 0x1c59f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c59fc, 0x00001042, 0x00001042, 0x00001042, 0x00001042, },
- { 0x1c5a00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5a04, 0x00000040, 0x00000040, 0x00000040, 0x00000040, },
- { 0x1c5a08, 0x00000080, 0x00000080, 0x00000080, 0x00000080, },
- { 0x1c5a0c, 0x000001a1, 0x000001a1, 0x00000141, 0x00000141, },
- { 0x1c5a10, 0x000001e1, 0x000001e1, 0x00000181, 0x00000181, },
- { 0x1c5a14, 0x00000021, 0x00000021, 0x000001c1, 0x000001c1, },
- { 0x1c5a18, 0x00000061, 0x00000061, 0x00000001, 0x00000001, },
- { 0x1c5a1c, 0x00000168, 0x00000168, 0x00000041, 0x00000041, },
- { 0x1c5a20, 0x000001a8, 0x000001a8, 0x000001a8, 0x000001a8, },
- { 0x1c5a24, 0x000001e8, 0x000001e8, 0x000001e8, 0x000001e8, },
- { 0x1c5a28, 0x00000028, 0x00000028, 0x00000028, 0x00000028, },
- { 0x1c5a2c, 0x00000068, 0x00000068, 0x00000068, 0x00000068, },
- { 0x1c5a30, 0x00000189, 0x00000189, 0x000000a8, 0x000000a8, },
- { 0x1c5a34, 0x000001c9, 0x000001c9, 0x00000169, 0x00000169, },
- { 0x1c5a38, 0x00000009, 0x00000009, 0x000001a9, 0x000001a9, },
- { 0x1c5a3c, 0x00000049, 0x00000049, 0x000001e9, 0x000001e9, },
- { 0x1c5a40, 0x00000089, 0x00000089, 0x00000029, 0x00000029, },
- { 0x1c5a44, 0x00000170, 0x00000170, 0x00000069, 0x00000069, },
- { 0x1c5a48, 0x000001b0, 0x000001b0, 0x00000190, 0x00000190, },
- { 0x1c5a4c, 0x000001f0, 0x000001f0, 0x000001d0, 0x000001d0, },
- { 0x1c5a50, 0x00000030, 0x00000030, 0x00000010, 0x00000010, },
- { 0x1c5a54, 0x00000070, 0x00000070, 0x00000050, 0x00000050, },
- { 0x1c5a58, 0x00000191, 0x00000191, 0x00000090, 0x00000090, },
- { 0x1c5a5c, 0x000001d1, 0x000001d1, 0x00000151, 0x00000151, },
- { 0x1c5a60, 0x00000011, 0x00000011, 0x00000191, 0x00000191, },
- { 0x1c5a64, 0x00000051, 0x00000051, 0x000001d1, 0x000001d1, },
- { 0x1c5a68, 0x00000091, 0x00000091, 0x00000011, 0x00000011, },
- { 0x1c5a6c, 0x000001b8, 0x000001b8, 0x00000051, 0x00000051, },
- { 0x1c5a70, 0x000001f8, 0x000001f8, 0x00000198, 0x00000198, },
- { 0x1c5a74, 0x00000038, 0x00000038, 0x000001d8, 0x000001d8, },
- { 0x1c5a78, 0x00000078, 0x00000078, 0x00000018, 0x00000018, },
- { 0x1c5a7c, 0x00000199, 0x00000199, 0x00000058, 0x00000058, },
- { 0x1c5a80, 0x000001d9, 0x000001d9, 0x00000098, 0x00000098, },
- { 0x1c5a84, 0x00000019, 0x00000019, 0x00000159, 0x00000159, },
- { 0x1c5a88, 0x00000059, 0x00000059, 0x00000199, 0x00000199, },
- { 0x1c5a8c, 0x00000099, 0x00000099, 0x000001d9, 0x000001d9, },
- { 0x1c5a90, 0x000000d9, 0x000000d9, 0x00000019, 0x00000019, },
- { 0x1c5a94, 0x000000f9, 0x000000f9, 0x00000059, 0x00000059, },
- { 0x1c5a98, 0x000000f9, 0x000000f9, 0x00000099, 0x00000099, },
- { 0x1c5a9c, 0x000000f9, 0x000000f9, 0x000000d9, 0x000000d9, },
- { 0x1c5aa0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5aa4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5aa8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5aac, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ab0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ab4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ab8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5abc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ac0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ac4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ac8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5acc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ad0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ad4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ad8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5adc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ae0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ae4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5ae8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5aec, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5af0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5af4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5af8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5afc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
- { 0x1c5b00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5b04, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
- { 0x1c5b08, 0x00000002, 0x00000002, 0x00000002, 0x00000002, },
- { 0x1c5b0c, 0x00000003, 0x00000003, 0x00000003, 0x00000003, },
- { 0x1c5b10, 0x00000004, 0x00000004, 0x00000004, 0x00000004, },
- { 0x1c5b14, 0x00000005, 0x00000005, 0x00000005, 0x00000005, },
- { 0x1c5b18, 0x00000008, 0x00000008, 0x00000008, 0x00000008, },
- { 0x1c5b1c, 0x00000009, 0x00000009, 0x00000009, 0x00000009, },
- { 0x1c5b20, 0x0000000a, 0x0000000a, 0x0000000a, 0x0000000a, },
- { 0x1c5b24, 0x0000000b, 0x0000000b, 0x0000000b, 0x0000000b, },
- { 0x1c5b28, 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c, },
- { 0x1c5b2c, 0x0000000d, 0x0000000d, 0x0000000d, 0x0000000d, },
- { 0x1c5b30, 0x00000010, 0x00000010, 0x00000010, 0x00000010, },
- { 0x1c5b34, 0x00000011, 0x00000011, 0x00000011, 0x00000011, },
- { 0x1c5b38, 0x00000012, 0x00000012, 0x00000012, 0x00000012, },
- { 0x1c5b3c, 0x00000013, 0x00000013, 0x00000013, 0x00000013, },
- { 0x1c5b40, 0x00000014, 0x00000014, 0x00000014, 0x00000014, },
- { 0x1c5b44, 0x00000015, 0x00000015, 0x00000015, 0x00000015, },
- { 0x1c5b48, 0x00000018, 0x00000018, 0x00000018, 0x00000018, },
- { 0x1c5b4c, 0x00000019, 0x00000019, 0x00000019, 0x00000019, },
- { 0x1c5b50, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, },
- { 0x1c5b54, 0x0000001b, 0x0000001b, 0x0000001b, 0x0000001b, },
- { 0x1c5b58, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c, },
- { 0x1c5b5c, 0x0000001d, 0x0000001d, 0x0000001d, 0x0000001d, },
- { 0x1c5b60, 0x00000020, 0x00000020, 0x00000020, 0x00000020, },
- { 0x1c5b64, 0x00000021, 0x00000021, 0x00000021, 0x00000021, },
- { 0x1c5b68, 0x00000022, 0x00000022, 0x00000022, 0x00000022, },
- { 0x1c5b6c, 0x00000023, 0x00000023, 0x00000023, 0x00000023, },
- { 0x1c5b70, 0x00000024, 0x00000024, 0x00000024, 0x00000024, },
- { 0x1c5b74, 0x00000025, 0x00000025, 0x00000025, 0x00000025, },
- { 0x1c5b78, 0x00000028, 0x00000028, 0x00000028, 0x00000028, },
- { 0x1c5b7c, 0x00000029, 0x00000029, 0x00000029, 0x00000029, },
- { 0x1c5b80, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a, },
- { 0x1c5b84, 0x0000002b, 0x0000002b, 0x0000002b, 0x0000002b, },
- { 0x1c5b88, 0x0000002c, 0x0000002c, 0x0000002c, 0x0000002c, },
- { 0x1c5b8c, 0x0000002d, 0x0000002d, 0x0000002d, 0x0000002d, },
- { 0x1c5b90, 0x00000030, 0x00000030, 0x00000030, 0x00000030, },
- { 0x1c5b94, 0x00000031, 0x00000031, 0x00000031, 0x00000031, },
- { 0x1c5b98, 0x00000032, 0x00000032, 0x00000032, 0x00000032, },
- { 0x1c5b9c, 0x00000033, 0x00000033, 0x00000033, 0x00000033, },
- { 0x1c5ba0, 0x00000034, 0x00000034, 0x00000034, 0x00000034, },
- { 0x1c5ba4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5ba8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bac, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bb0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bb4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bb8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bbc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bc0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bc4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bc8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bcc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bd0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bd4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bd8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bdc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5be0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5be4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5be8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bec, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bf0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bf4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
- { 0x1c5bf8, 0x00000010, 0x00000010, 0x00000010, 0x00000010, },
- { 0x1c5bfc, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, },
- { 0x1c5c00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c0c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c10, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c14, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c18, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c1c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c20, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c24, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c28, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c2c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c30, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c34, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c38, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5c3c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5cf0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5cf4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5cf8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c5cfc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6200, 0x00000008, 0x00000008, 0x0000000e, 0x0000000e, },
- { 0x1c6204, 0x00000440, 0x00000440, 0x00000440, 0x00000440, },
- { 0x1c6208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, },
- { 0x1c620c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, },
- { 0x1c6210, 0x40806333, 0x40806333, 0x40806333, 0x40806333, },
- { 0x1c6214, 0x00106c10, 0x00106c10, 0x00106c10, 0x00106c10, },
- { 0x1c6218, 0x009c4060, 0x009c4060, 0x009c4060, 0x009c4060, },
- { 0x1c621c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, },
- { 0x1c6220, 0x018830c6, 0x018830c6, 0x018830c6, 0x018830c6, },
- { 0x1c6224, 0x00000400, 0x00000400, 0x00000400, 0x00000400, },
- { 0x1c6228, 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5, },
- { 0x1c622c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6230, 0x00000108, 0x00000210, 0x00000210, 0x00000108, },
- { 0x1c6234, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c6238, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c623c, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, },
- { 0x1c6240, 0x38490a20, 0x38490a20, 0x38490a20, 0x38490a20, },
- { 0x1c6244, 0x00007bb6, 0x00007bb6, 0x00007bb6, 0x00007bb6, },
- { 0x1c6248, 0x0fff3ffc, 0x0fff3ffc, 0x0fff3ffc, 0x0fff3ffc, },
- { 0x1c624c, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
- { 0x1c6250, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, },
- { 0x1c6254, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6258, 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380, },
- { 0x1c625c, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, },
- { 0x1c6260, 0xdfa91f01, 0xdfa91f01, 0xdfa91f01, 0xdfa91f01, },
- { 0x1c6264, 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11, },
- { 0x1c6268, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c626c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, },
- { 0x1c6274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, },
- { 0x1c6278, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, },
- { 0x1c627c, 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce, },
- { 0x1c6300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, },
- { 0x1c6304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, },
- { 0x1c6308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, },
- { 0x1c630c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, },
- { 0x1c6310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, },
- { 0x1c6314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, },
- { 0x1c6318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, },
- { 0x1c631c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, },
- { 0x1c6320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, },
- { 0x1c6324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, },
- { 0x1c6328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, },
- { 0x1c632c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6338, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c633c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6340, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6344, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c6348, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, },
- { 0x1c634c, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, },
- { 0x1c6350, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, },
- { 0x1c6354, 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff, },
- { 0x1c6358, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, },
- { 0x1c6388, 0x08000000, 0x08000000, 0x08000000, 0x08000000, },
- { 0x1c638c, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c6390, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c6394, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, },
- { 0x1c6398, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce, },
- { 0x1c639c, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
- { 0x1c63a0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63a4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63a8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63ac, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63b0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63b4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63b8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63bc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63c0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63c4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63c8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63cc, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c63d0, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c63d4, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
- { 0x1c63d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
- { 0x1c63dc, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, },
- { 0x1c63e0, 0x000000c0, 0x000000c0, 0x000000c0, 0x000000c0, },
- { 0x1c6848, 0x00180a65, 0x00180a65, 0x00180a68, 0x00180a68, },
- { 0x1c6920, 0x0510001c, 0x0510001c, 0x0510001c, 0x0510001c, },
- { 0x1c6960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, },
- { 0x1c720c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, },
- { 0x1c726c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, },
- { 0x1c7848, 0x00180a65, 0x00180a65, 0x00180a68, 0x00180a68, },
- { 0x1c7920, 0x0510001c, 0x0510001c, 0x0510001c, 0x0510001c, },
- { 0x1c7960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, },
- { 0x1c820c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, },
- { 0x1c826c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, },
-/* { 0x1c8864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, }, */
- { 0x1c8864, 0x0001c600, 0x0001c600, 0x0001c600, 0x0001c600, },
- { 0x1c895c, 0x004b6a8e, 0x004b6a8e, 0x004b6a8e, 0x004b6a8e, },
- { 0x1c8968, 0x000003ce, 0x000003ce, 0x000003ce, 0x000003ce, },
- { 0x1c89bc, 0x00181400, 0x00181400, 0x00181400, 0x00181400, },
- { 0x1c9270, 0x00820820, 0x00820820, 0x00820820, 0x00820820, },
- { 0x1c935c, 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f, },
- { 0x1c9360, 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207, },
- { 0x1c9364, 0x17601685, 0x17601685, 0x17601685, 0x17601685, },
- { 0x1c9368, 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104, },
- { 0x1c936c, 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03, },
- { 0x1c9370, 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883, },
- { 0x1c9374, 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803, },
- { 0x1c9378, 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682, },
- { 0x1c937c, 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482, },
- { 0x1c9380, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, },
- { 0x1c9384, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, }
-};
-
-/*
- * look up a certain register in ar5416_phy_init[] and return the init. value
- * for the band and bandwidth given. Return 0 if register address not found.
- */
-static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)
-{
- unsigned int i;
- for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) {
- if (ar5416_phy_init[i].reg != reg)
- continue;
-
- if (is_2ghz) {
- if (is_40mhz)
- return ar5416_phy_init[i]._2ghz_40;
- else
- return ar5416_phy_init[i]._2ghz_20;
- } else {
- if (is_40mhz)
- return ar5416_phy_init[i]._5ghz_40;
- else
- return ar5416_phy_init[i]._5ghz_20;
- }
- }
- return 0;
-}
-
-/*
- * initialize some phy regs from eeprom values in modal_header[]
- * acc. to band and bandwidth
- */
-static int ar9170_init_phy_from_eeprom(struct ar9170 *ar,
- bool is_2ghz, bool is_40mhz)
-{
- static const u8 xpd2pd[16] = {
- 0x2, 0x2, 0x2, 0x1, 0x2, 0x2, 0x6, 0x2,
- 0x2, 0x3, 0x7, 0x2, 0xB, 0x2, 0x2, 0x2
- };
- u32 defval, newval;
- /* pointer to the modal_header acc. to band */
- struct ar9170_eeprom_modal *m = &ar->eeprom.modal_header[is_2ghz];
-
- ar9170_regwrite_begin(ar);
-
- /* ant common control (index 0) */
- newval = le32_to_cpu(m->antCtrlCommon);
- ar9170_regwrite(0x1c5964, newval);
-
- /* ant control chain 0 (index 1) */
- newval = le32_to_cpu(m->antCtrlChain[0]);
- ar9170_regwrite(0x1c5960, newval);
-
- /* ant control chain 2 (index 2) */
- newval = le32_to_cpu(m->antCtrlChain[1]);
- ar9170_regwrite(0x1c7960, newval);
-
- /* SwSettle (index 3) */
- if (!is_40mhz) {
- defval = ar9170_get_default_phy_reg_val(0x1c5844,
- is_2ghz, is_40mhz);
- newval = (defval & ~0x3f80) |
- ((m->switchSettling & 0x7f) << 7);
- ar9170_regwrite(0x1c5844, newval);
- }
-
- /* adcDesired, pdaDesired (index 4) */
- defval = ar9170_get_default_phy_reg_val(0x1c5850, is_2ghz, is_40mhz);
- newval = (defval & ~0xffff) | ((u8)m->pgaDesiredSize << 8) |
- ((u8)m->adcDesiredSize);
- ar9170_regwrite(0x1c5850, newval);
-
- /* TxEndToXpaOff, TxFrameToXpaOn (index 5) */
- defval = ar9170_get_default_phy_reg_val(0x1c5834, is_2ghz, is_40mhz);
- newval = (m->txEndToXpaOff << 24) | (m->txEndToXpaOff << 16) |
- (m->txFrameToXpaOn << 8) | m->txFrameToXpaOn;
- ar9170_regwrite(0x1c5834, newval);
-
- /* TxEndToRxOn (index 6) */
- defval = ar9170_get_default_phy_reg_val(0x1c5828, is_2ghz, is_40mhz);
- newval = (defval & ~0xff0000) | (m->txEndToRxOn << 16);
- ar9170_regwrite(0x1c5828, newval);
-
- /* thresh62 (index 7) */
- defval = ar9170_get_default_phy_reg_val(0x1c8864, is_2ghz, is_40mhz);
- newval = (defval & ~0x7f000) | (m->thresh62 << 12);
- ar9170_regwrite(0x1c8864, newval);
-
- /* tx/rx attenuation chain 0 (index 8) */
- defval = ar9170_get_default_phy_reg_val(0x1c5848, is_2ghz, is_40mhz);
- newval = (defval & ~0x3f000) | ((m->txRxAttenCh[0] & 0x3f) << 12);
- ar9170_regwrite(0x1c5848, newval);
-
- /* tx/rx attenuation chain 2 (index 9) */
- defval = ar9170_get_default_phy_reg_val(0x1c7848, is_2ghz, is_40mhz);
- newval = (defval & ~0x3f000) | ((m->txRxAttenCh[1] & 0x3f) << 12);
- ar9170_regwrite(0x1c7848, newval);
-
- /* tx/rx margin chain 0 (index 10) */
- defval = ar9170_get_default_phy_reg_val(0x1c620c, is_2ghz, is_40mhz);
- newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[0] & 0x3f) << 18);
- /* bsw margin chain 0 for 5GHz only */
- if (!is_2ghz)
- newval = (newval & ~0x3c00) | ((m->bswMargin[0] & 0xf) << 10);
- ar9170_regwrite(0x1c620c, newval);
-
- /* tx/rx margin chain 2 (index 11) */
- defval = ar9170_get_default_phy_reg_val(0x1c820c, is_2ghz, is_40mhz);
- newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[1] & 0x3f) << 18);
- ar9170_regwrite(0x1c820c, newval);
-
- /* iqCall, iqCallq chain 0 (index 12) */
- defval = ar9170_get_default_phy_reg_val(0x1c5920, is_2ghz, is_40mhz);
- newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[0] & 0x3f) << 5) |
- ((u8)m->iqCalQCh[0] & 0x1f);
- ar9170_regwrite(0x1c5920, newval);
-
- /* iqCall, iqCallq chain 2 (index 13) */
- defval = ar9170_get_default_phy_reg_val(0x1c7920, is_2ghz, is_40mhz);
- newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[1] & 0x3f) << 5) |
- ((u8)m->iqCalQCh[1] & 0x1f);
- ar9170_regwrite(0x1c7920, newval);
-
- /* xpd gain mask (index 14) */
- defval = ar9170_get_default_phy_reg_val(0x1c6258, is_2ghz, is_40mhz);
- newval = (defval & ~0xf0000) | (xpd2pd[m->xpdGain & 0xf] << 16);
- ar9170_regwrite(0x1c6258, newval);
- ar9170_regwrite_finish();
-
- return ar9170_regwrite_result();
-}
-
-int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
-{
- int i, err;
- u32 val;
- bool is_2ghz = band == IEEE80211_BAND_2GHZ;
- bool is_40mhz = conf_is_ht40(&ar->hw->conf);
-
- ar9170_regwrite_begin(ar);
-
- for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) {
- if (is_40mhz) {
- if (is_2ghz)
- val = ar5416_phy_init[i]._2ghz_40;
- else
- val = ar5416_phy_init[i]._5ghz_40;
- } else {
- if (is_2ghz)
- val = ar5416_phy_init[i]._2ghz_20;
- else
- val = ar5416_phy_init[i]._5ghz_20;
- }
-
- ar9170_regwrite(ar5416_phy_init[i].reg, val);
- }
-
- ar9170_regwrite_finish();
- err = ar9170_regwrite_result();
- if (err)
- return err;
-
- err = ar9170_init_phy_from_eeprom(ar, is_2ghz, is_40mhz);
- if (err)
- return err;
-
- err = ar9170_init_power_cal(ar);
- if (err)
- return err;
-
- /* XXX: remove magic! */
- if (is_2ghz)
- err = ar9170_write_reg(ar, 0x1d4014, 0x5163);
- else
- err = ar9170_write_reg(ar, 0x1d4014, 0x5143);
-
- return err;
-}
-
-struct ar9170_rf_init {
- u32 reg, _5ghz, _2ghz;
-};
-
-static struct ar9170_rf_init ar9170_rf_init[] = {
- /* bank 0 */
- { 0x1c58b0, 0x1e5795e5, 0x1e5795e5},
- { 0x1c58e0, 0x02008020, 0x02008020},
- /* bank 1 */
- { 0x1c58b0, 0x02108421, 0x02108421},
- { 0x1c58ec, 0x00000008, 0x00000008},
- /* bank 2 */
- { 0x1c58b0, 0x0e73ff17, 0x0e73ff17},
- { 0x1c58e0, 0x00000420, 0x00000420},
- /* bank 3 */
- { 0x1c58f0, 0x01400018, 0x01c00018},
- /* bank 4 */
- { 0x1c58b0, 0x000001a1, 0x000001a1},
- { 0x1c58e8, 0x00000001, 0x00000001},
- /* bank 5 */
- { 0x1c58b0, 0x00000013, 0x00000013},
- { 0x1c58e4, 0x00000002, 0x00000002},
- /* bank 6 */
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00004000, 0x00004000},
- { 0x1c58b0, 0x00006c00, 0x00006c00},
- { 0x1c58b0, 0x00002c00, 0x00002c00},
- { 0x1c58b0, 0x00004800, 0x00004800},
- { 0x1c58b0, 0x00004000, 0x00004000},
- { 0x1c58b0, 0x00006000, 0x00006000},
- { 0x1c58b0, 0x00001000, 0x00001000},
- { 0x1c58b0, 0x00004000, 0x00004000},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00087c00, 0x00087c00},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00005400, 0x00005400},
- { 0x1c58b0, 0x00000c00, 0x00000c00},
- { 0x1c58b0, 0x00001800, 0x00001800},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00006c00, 0x00006c00},
- { 0x1c58b0, 0x00006c00, 0x00006c00},
- { 0x1c58b0, 0x00007c00, 0x00007c00},
- { 0x1c58b0, 0x00002c00, 0x00002c00},
- { 0x1c58b0, 0x00003c00, 0x00003c00},
- { 0x1c58b0, 0x00003800, 0x00003800},
- { 0x1c58b0, 0x00001c00, 0x00001c00},
- { 0x1c58b0, 0x00000800, 0x00000800},
- { 0x1c58b0, 0x00000408, 0x00000408},
- { 0x1c58b0, 0x00004c15, 0x00004c15},
- { 0x1c58b0, 0x00004188, 0x00004188},
- { 0x1c58b0, 0x0000201e, 0x0000201e},
- { 0x1c58b0, 0x00010408, 0x00010408},
- { 0x1c58b0, 0x00000801, 0x00000801},
- { 0x1c58b0, 0x00000c08, 0x00000c08},
- { 0x1c58b0, 0x0000181e, 0x0000181e},
- { 0x1c58b0, 0x00001016, 0x00001016},
- { 0x1c58b0, 0x00002800, 0x00002800},
- { 0x1c58b0, 0x00004010, 0x00004010},
- { 0x1c58b0, 0x0000081c, 0x0000081c},
- { 0x1c58b0, 0x00000115, 0x00000115},
- { 0x1c58b0, 0x00000015, 0x00000015},
- { 0x1c58b0, 0x00000066, 0x00000066},
- { 0x1c58b0, 0x0000001c, 0x0000001c},
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00000004, 0x00000004},
- { 0x1c58b0, 0x00000015, 0x00000015},
- { 0x1c58b0, 0x0000001f, 0x0000001f},
- { 0x1c58e0, 0x00000000, 0x00000400},
- /* bank 7 */
- { 0x1c58b0, 0x000000a0, 0x000000a0},
- { 0x1c58b0, 0x00000000, 0x00000000},
- { 0x1c58b0, 0x00000040, 0x00000040},
- { 0x1c58f0, 0x0000001c, 0x0000001c},
-};
-
-static int ar9170_init_rf_banks_0_7(struct ar9170 *ar, bool band5ghz)
-{
- int err, i;
-
- ar9170_regwrite_begin(ar);
-
- for (i = 0; i < ARRAY_SIZE(ar9170_rf_init); i++)
- ar9170_regwrite(ar9170_rf_init[i].reg,
- band5ghz ? ar9170_rf_init[i]._5ghz
- : ar9170_rf_init[i]._2ghz);
-
- ar9170_regwrite_finish();
- err = ar9170_regwrite_result();
- if (err)
- wiphy_err(ar->hw->wiphy, "rf init failed\n");
- return err;
-}
-
-static int ar9170_init_rf_bank4_pwr(struct ar9170 *ar, bool band5ghz,
- u32 freq, enum ar9170_bw bw)
-{
- int err;
- u32 d0, d1, td0, td1, fd0, fd1;
- u8 chansel;
- u8 refsel0 = 1, refsel1 = 0;
- u8 lf_synth = 0;
-
- switch (bw) {
- case AR9170_BW_40_ABOVE:
- freq += 10;
- break;
- case AR9170_BW_40_BELOW:
- freq -= 10;
- break;
- case AR9170_BW_20:
- break;
- case __AR9170_NUM_BW:
- BUG();
- }
-
- if (band5ghz) {
- if (freq % 10) {
- chansel = (freq - 4800) / 5;
- } else {
- chansel = ((freq - 4800) / 10) * 2;
- refsel0 = 0;
- refsel1 = 1;
- }
- chansel = byte_rev_table[chansel];
- } else {
- if (freq == 2484) {
- chansel = 10 + (freq - 2274) / 5;
- lf_synth = 1;
- } else
- chansel = 16 + (freq - 2272) / 5;
- chansel *= 4;
- chansel = byte_rev_table[chansel];
- }
-
- d1 = chansel;
- d0 = 0x21 |
- refsel0 << 3 |
- refsel1 << 2 |
- lf_synth << 1;
- td0 = d0 & 0x1f;
- td1 = d1 & 0x1f;
- fd0 = td1 << 5 | td0;
-
- td0 = (d0 >> 5) & 0x7;
- td1 = (d1 >> 5) & 0x7;
- fd1 = td1 << 5 | td0;
-
- ar9170_regwrite_begin(ar);
-
- ar9170_regwrite(0x1c58b0, fd0);
- ar9170_regwrite(0x1c58e8, fd1);
-
- ar9170_regwrite_finish();
- err = ar9170_regwrite_result();
- if (err)
- return err;
-
- msleep(10);
-
- return 0;
-}
-
-struct ar9170_phy_freq_params {
- u8 coeff_exp;
- u16 coeff_man;
- u8 coeff_exp_shgi;
- u16 coeff_man_shgi;
-};
-
-struct ar9170_phy_freq_entry {
- u16 freq;
- struct ar9170_phy_freq_params params[__AR9170_NUM_BW];
-};
-
-/* NB: must be in sync with channel tables in main! */
-static const struct ar9170_phy_freq_entry ar9170_phy_freq_params[] = {
-/*
- * freq,
- * 20MHz,
- * 40MHz (below),
- * 40Mhz (above),
- */
- { 2412, {
- { 3, 21737, 3, 19563, },
- { 3, 21827, 3, 19644, },
- { 3, 21647, 3, 19482, },
- } },
- { 2417, {
- { 3, 21692, 3, 19523, },
- { 3, 21782, 3, 19604, },
- { 3, 21602, 3, 19442, },
- } },
- { 2422, {
- { 3, 21647, 3, 19482, },
- { 3, 21737, 3, 19563, },
- { 3, 21558, 3, 19402, },
- } },
- { 2427, {
- { 3, 21602, 3, 19442, },
- { 3, 21692, 3, 19523, },
- { 3, 21514, 3, 19362, },
- } },
- { 2432, {
- { 3, 21558, 3, 19402, },
- { 3, 21647, 3, 19482, },
- { 3, 21470, 3, 19323, },
- } },
- { 2437, {
- { 3, 21514, 3, 19362, },
- { 3, 21602, 3, 19442, },
- { 3, 21426, 3, 19283, },
- } },
- { 2442, {
- { 3, 21470, 3, 19323, },
- { 3, 21558, 3, 19402, },
- { 3, 21382, 3, 19244, },
- } },
- { 2447, {
- { 3, 21426, 3, 19283, },
- { 3, 21514, 3, 19362, },
- { 3, 21339, 3, 19205, },
- } },
- { 2452, {
- { 3, 21382, 3, 19244, },
- { 3, 21470, 3, 19323, },
- { 3, 21295, 3, 19166, },
- } },
- { 2457, {
- { 3, 21339, 3, 19205, },
- { 3, 21426, 3, 19283, },
- { 3, 21252, 3, 19127, },
- } },
- { 2462, {
- { 3, 21295, 3, 19166, },
- { 3, 21382, 3, 19244, },
- { 3, 21209, 3, 19088, },
- } },
- { 2467, {
- { 3, 21252, 3, 19127, },
- { 3, 21339, 3, 19205, },
- { 3, 21166, 3, 19050, },
- } },
- { 2472, {
- { 3, 21209, 3, 19088, },
- { 3, 21295, 3, 19166, },
- { 3, 21124, 3, 19011, },
- } },
- { 2484, {
- { 3, 21107, 3, 18996, },
- { 3, 21192, 3, 19073, },
- { 3, 21022, 3, 18920, },
- } },
- { 4920, {
- { 4, 21313, 4, 19181, },
- { 4, 21356, 4, 19220, },
- { 4, 21269, 4, 19142, },
- } },
- { 4940, {
- { 4, 21226, 4, 19104, },
- { 4, 21269, 4, 19142, },
- { 4, 21183, 4, 19065, },
- } },
- { 4960, {
- { 4, 21141, 4, 19027, },
- { 4, 21183, 4, 19065, },
- { 4, 21098, 4, 18988, },
- } },
- { 4980, {
- { 4, 21056, 4, 18950, },
- { 4, 21098, 4, 18988, },
- { 4, 21014, 4, 18912, },
- } },
- { 5040, {
- { 4, 20805, 4, 18725, },
- { 4, 20846, 4, 18762, },
- { 4, 20764, 4, 18687, },
- } },
- { 5060, {
- { 4, 20723, 4, 18651, },
- { 4, 20764, 4, 18687, },
- { 4, 20682, 4, 18614, },
- } },
- { 5080, {
- { 4, 20641, 4, 18577, },
- { 4, 20682, 4, 18614, },
- { 4, 20601, 4, 18541, },
- } },
- { 5180, {
- { 4, 20243, 4, 18219, },
- { 4, 20282, 4, 18254, },
- { 4, 20204, 4, 18183, },
- } },
- { 5200, {
- { 4, 20165, 4, 18148, },
- { 4, 20204, 4, 18183, },
- { 4, 20126, 4, 18114, },
- } },
- { 5220, {
- { 4, 20088, 4, 18079, },
- { 4, 20126, 4, 18114, },
- { 4, 20049, 4, 18044, },
- } },
- { 5240, {
- { 4, 20011, 4, 18010, },
- { 4, 20049, 4, 18044, },
- { 4, 19973, 4, 17976, },
- } },
- { 5260, {
- { 4, 19935, 4, 17941, },
- { 4, 19973, 4, 17976, },
- { 4, 19897, 4, 17907, },
- } },
- { 5280, {
- { 4, 19859, 4, 17873, },
- { 4, 19897, 4, 17907, },
- { 4, 19822, 4, 17840, },
- } },
- { 5300, {
- { 4, 19784, 4, 17806, },
- { 4, 19822, 4, 17840, },
- { 4, 19747, 4, 17772, },
- } },
- { 5320, {
- { 4, 19710, 4, 17739, },
- { 4, 19747, 4, 17772, },
- { 4, 19673, 4, 17706, },
- } },
- { 5500, {
- { 4, 19065, 4, 17159, },
- { 4, 19100, 4, 17190, },
- { 4, 19030, 4, 17127, },
- } },
- { 5520, {
- { 4, 18996, 4, 17096, },
- { 4, 19030, 4, 17127, },
- { 4, 18962, 4, 17065, },
- } },
- { 5540, {
- { 4, 18927, 4, 17035, },
- { 4, 18962, 4, 17065, },
- { 4, 18893, 4, 17004, },
- } },
- { 5560, {
- { 4, 18859, 4, 16973, },
- { 4, 18893, 4, 17004, },
- { 4, 18825, 4, 16943, },
- } },
- { 5580, {
- { 4, 18792, 4, 16913, },
- { 4, 18825, 4, 16943, },
- { 4, 18758, 4, 16882, },
- } },
- { 5600, {
- { 4, 18725, 4, 16852, },
- { 4, 18758, 4, 16882, },
- { 4, 18691, 4, 16822, },
- } },
- { 5620, {
- { 4, 18658, 4, 16792, },
- { 4, 18691, 4, 16822, },
- { 4, 18625, 4, 16762, },
- } },
- { 5640, {
- { 4, 18592, 4, 16733, },
- { 4, 18625, 4, 16762, },
- { 4, 18559, 4, 16703, },
- } },
- { 5660, {
- { 4, 18526, 4, 16673, },
- { 4, 18559, 4, 16703, },
- { 4, 18493, 4, 16644, },
- } },
- { 5680, {
- { 4, 18461, 4, 16615, },
- { 4, 18493, 4, 16644, },
- { 4, 18428, 4, 16586, },
- } },
- { 5700, {
- { 4, 18396, 4, 16556, },
- { 4, 18428, 4, 16586, },
- { 4, 18364, 4, 16527, },
- } },
- { 5745, {
- { 4, 18252, 4, 16427, },
- { 4, 18284, 4, 16455, },
- { 4, 18220, 4, 16398, },
- } },
- { 5765, {
- { 4, 18189, 5, 32740, },
- { 4, 18220, 4, 16398, },
- { 4, 18157, 5, 32683, },
- } },
- { 5785, {
- { 4, 18126, 5, 32626, },
- { 4, 18157, 5, 32683, },
- { 4, 18094, 5, 32570, },
- } },
- { 5805, {
- { 4, 18063, 5, 32514, },
- { 4, 18094, 5, 32570, },
- { 4, 18032, 5, 32458, },
- } },
- { 5825, {
- { 4, 18001, 5, 32402, },
- { 4, 18032, 5, 32458, },
- { 4, 17970, 5, 32347, },
- } },
- { 5170, {
- { 4, 20282, 4, 18254, },
- { 4, 20321, 4, 18289, },
- { 4, 20243, 4, 18219, },
- } },
- { 5190, {
- { 4, 20204, 4, 18183, },
- { 4, 20243, 4, 18219, },
- { 4, 20165, 4, 18148, },
- } },
- { 5210, {
- { 4, 20126, 4, 18114, },
- { 4, 20165, 4, 18148, },
- { 4, 20088, 4, 18079, },
- } },
- { 5230, {
- { 4, 20049, 4, 18044, },
- { 4, 20088, 4, 18079, },
- { 4, 20011, 4, 18010, },
- } },
-};
-
-static const struct ar9170_phy_freq_params *
-ar9170_get_hw_dyn_params(struct ieee80211_channel *channel,
- enum ar9170_bw bw)
-{
- unsigned int chanidx = 0;
- u16 freq = 2412;
-
- if (channel) {
- chanidx = channel->hw_value;
- freq = channel->center_freq;
- }
-
- BUG_ON(chanidx >= ARRAY_SIZE(ar9170_phy_freq_params));
-
- BUILD_BUG_ON(__AR9170_NUM_BW != 3);
-
- WARN_ON(ar9170_phy_freq_params[chanidx].freq != freq);
-
- return &ar9170_phy_freq_params[chanidx].params[bw];
-}
-
-
-int ar9170_init_rf(struct ar9170 *ar)
-{
- const struct ar9170_phy_freq_params *freqpar;
- __le32 cmd[7];
- int err;
-
- err = ar9170_init_rf_banks_0_7(ar, false);
- if (err)
- return err;
-
- err = ar9170_init_rf_bank4_pwr(ar, false, 2412, AR9170_BW_20);
- if (err)
- return err;
-
- freqpar = ar9170_get_hw_dyn_params(NULL, AR9170_BW_20);
-
- cmd[0] = cpu_to_le32(2412 * 1000);
- cmd[1] = cpu_to_le32(0);
- cmd[2] = cpu_to_le32(1);
- cmd[3] = cpu_to_le32(freqpar->coeff_exp);
- cmd[4] = cpu_to_le32(freqpar->coeff_man);
- cmd[5] = cpu_to_le32(freqpar->coeff_exp_shgi);
- cmd[6] = cpu_to_le32(freqpar->coeff_man_shgi);
-
- /* RF_INIT echoes the command back to us */
- err = ar->exec_cmd(ar, AR9170_CMD_RF_INIT,
- sizeof(cmd), (u8 *)cmd,
- sizeof(cmd), (u8 *)cmd);
- if (err)
- return err;
-
- msleep(1000);
-
- return ar9170_echo_test(ar, 0xaabbccdd);
-}
-
-static int ar9170_find_freq_idx(int nfreqs, u8 *freqs, u8 f)
-{
- int idx = nfreqs - 2;
-
- while (idx >= 0) {
- if (f >= freqs[idx])
- return idx;
- idx--;
- }
-
- return 0;
-}
-
-static s32 ar9170_interpolate_s32(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
-{
- /* nothing to interpolate, it's horizontal */
- if (y2 == y1)
- return y1;
-
- /* check if we hit one of the edges */
- if (x == x1)
- return y1;
- if (x == x2)
- return y2;
-
- /* x1 == x2 is bad, hopefully == x */
- if (x2 == x1)
- return y1;
-
- return y1 + (((y2 - y1) * (x - x1)) / (x2 - x1));
-}
-
-static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2)
-{
-#define SHIFT 8
- s32 y;
-
- y = ar9170_interpolate_s32(x << SHIFT,
- x1 << SHIFT, y1 << SHIFT,
- x2 << SHIFT, y2 << SHIFT);
-
- /*
- * XXX: unwrap this expression
- * Isn't it just DIV_ROUND_UP(y, 1<<SHIFT)?
- * Can we rely on the compiler to optimise away the div?
- */
- return (y >> SHIFT) + ((y & (1<<(SHIFT-1))) >> (SHIFT - 1));
-#undef SHIFT
-}
-
-static u8 ar9170_interpolate_val(u8 x, u8 *x_array, u8 *y_array)
-{
- int i;
-
- for (i = 0; i < 3; i++)
- if (x <= x_array[i + 1])
- break;
-
- return ar9170_interpolate_u8(x,
- x_array[i],
- y_array[i],
- x_array[i + 1],
- y_array[i + 1]);
-}
-
-static int ar9170_set_freq_cal_data(struct ar9170 *ar,
- struct ieee80211_channel *channel)
-{
- u8 *cal_freq_pier;
- u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
- u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
- int chain, idx, i;
- u32 phy_data = 0;
- u8 f, tmp;
-
- switch (channel->band) {
- case IEEE80211_BAND_2GHZ:
- f = channel->center_freq - 2300;
- cal_freq_pier = ar->eeprom.cal_freq_pier_2G;
- i = AR5416_NUM_2G_CAL_PIERS - 1;
- break;
-
- case IEEE80211_BAND_5GHZ:
- f = (channel->center_freq - 4800) / 5;
- cal_freq_pier = ar->eeprom.cal_freq_pier_5G;
- i = AR5416_NUM_5G_CAL_PIERS - 1;
- break;
-
- default:
- return -EINVAL;
- break;
- }
-
- for (; i >= 0; i--) {
- if (cal_freq_pier[i] != 0xff)
- break;
- }
- if (i < 0)
- return -EINVAL;
-
- idx = ar9170_find_freq_idx(i, cal_freq_pier, f);
-
- ar9170_regwrite_begin(ar);
-
- for (chain = 0; chain < AR5416_MAX_CHAINS; chain++) {
- for (i = 0; i < AR5416_PD_GAIN_ICEPTS; i++) {
- struct ar9170_calibration_data_per_freq *cal_pier_data;
- int j;
-
- switch (channel->band) {
- case IEEE80211_BAND_2GHZ:
- cal_pier_data = &ar->eeprom.
- cal_pier_data_2G[chain][idx];
- break;
-
- case IEEE80211_BAND_5GHZ:
- cal_pier_data = &ar->eeprom.
- cal_pier_data_5G[chain][idx];
- break;
-
- default:
- return -EINVAL;
- }
-
- for (j = 0; j < 2; j++) {
- vpds[j][i] = ar9170_interpolate_u8(f,
- cal_freq_pier[idx],
- cal_pier_data->vpd_pdg[j][i],
- cal_freq_pier[idx + 1],
- cal_pier_data[1].vpd_pdg[j][i]);
-
- pwrs[j][i] = ar9170_interpolate_u8(f,
- cal_freq_pier[idx],
- cal_pier_data->pwr_pdg[j][i],
- cal_freq_pier[idx + 1],
- cal_pier_data[1].pwr_pdg[j][i]) / 2;
- }
- }
-
- for (i = 0; i < 76; i++) {
- if (i < 25) {
- tmp = ar9170_interpolate_val(i, &pwrs[0][0],
- &vpds[0][0]);
- } else {
- tmp = ar9170_interpolate_val(i - 12,
- &pwrs[1][0],
- &vpds[1][0]);
- }
-
- phy_data |= tmp << ((i & 3) << 3);
- if ((i & 3) == 3) {
- ar9170_regwrite(0x1c6280 + chain * 0x1000 +
- (i & ~3), phy_data);
- phy_data = 0;
- }
- }
-
- for (i = 19; i < 32; i++)
- ar9170_regwrite(0x1c6280 + chain * 0x1000 + (i << 2),
- 0x0);
- }
-
- ar9170_regwrite_finish();
- return ar9170_regwrite_result();
-}
-
-static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
- struct ar9170_calctl_edges edges[],
- u32 freq)
-{
- int i;
- u8 rc = AR5416_MAX_RATE_POWER;
- u8 f;
- if (freq < 3000)
- f = freq - 2300;
- else
- f = (freq - 4800) / 5;
-
- for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
- if (edges[i].channel == 0xff)
- break;
- if (f == edges[i].channel) {
- /* exact freq match */
- rc = edges[i].power_flags & ~AR9170_CALCTL_EDGE_FLAGS;
- break;
- }
- if (i > 0 && f < edges[i].channel) {
- if (f > edges[i - 1].channel &&
- edges[i - 1].power_flags &
- AR9170_CALCTL_EDGE_FLAGS) {
- /* lower channel has the inband flag set */
- rc = edges[i - 1].power_flags &
- ~AR9170_CALCTL_EDGE_FLAGS;
- }
- break;
- }
- }
-
- if (i == AR5416_NUM_BAND_EDGES) {
- if (f > edges[i - 1].channel &&
- edges[i - 1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
- /* lower channel has the inband flag set */
- rc = edges[i - 1].power_flags &
- ~AR9170_CALCTL_EDGE_FLAGS;
- }
- }
- return rc;
-}
-
-static u8 ar9170_get_heavy_clip(struct ar9170 *ar,
- struct ar9170_calctl_edges edges[],
- u32 freq, enum ar9170_bw bw)
-{
- u8 f;
- int i;
- u8 rc = 0;
-
- if (freq < 3000)
- f = freq - 2300;
- else
- f = (freq - 4800) / 5;
-
- if (bw == AR9170_BW_40_BELOW || bw == AR9170_BW_40_ABOVE)
- rc |= 0xf0;
-
- for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
- if (edges[i].channel == 0xff)
- break;
- if (f == edges[i].channel) {
- if (!(edges[i].power_flags & AR9170_CALCTL_EDGE_FLAGS))
- rc |= 0x0f;
- break;
- }
- }
-
- return rc;
-}
-
-/*
- * calculate the conformance test limits and the heavy clip parameter
- * and apply them to ar->power* (derived from otus hal/hpmain.c, line 3706)
- */
-static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
-{
- u8 ctl_grp; /* CTL group */
- u8 ctl_idx; /* CTL index */
- int i, j;
- struct ctl_modes {
- u8 ctl_mode;
- u8 max_power;
- u8 *pwr_cal_data;
- int pwr_cal_len;
- } *modes;
-
- /*
- * order is relevant in the mode_list_*: we fall back to the
- * lower indices if any mode is missed in the EEPROM.
- */
- struct ctl_modes mode_list_2ghz[] = {
- { CTL_11B, 0, ar->power_2G_cck, 4 },
- { CTL_11G, 0, ar->power_2G_ofdm, 4 },
- { CTL_2GHT20, 0, ar->power_2G_ht20, 8 },
- { CTL_2GHT40, 0, ar->power_2G_ht40, 8 },
- };
- struct ctl_modes mode_list_5ghz[] = {
- { CTL_11A, 0, ar->power_5G_leg, 4 },
- { CTL_5GHT20, 0, ar->power_5G_ht20, 8 },
- { CTL_5GHT40, 0, ar->power_5G_ht40, 8 },
- };
- int nr_modes;
-
-#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
-
- ar->phy_heavy_clip = 0;
-
- /*
- * TODO: investigate the differences between OTUS'
- * hpreg.c::zfHpGetRegulatoryDomain() and
- * ath/regd.c::ath_regd_get_band_ctl() -
- * e.g. for FCC3_WORLD the OTUS procedure
- * always returns CTL_FCC, while the one in ath/ delivers
- * CTL_ETSI for 2GHz and CTL_FCC for 5GHz.
- */
- ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory,
- ar->hw->conf.channel->band);
-
- /* ctl group not found - either invalid band (NO_CTL) or ww roaming */
- if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL)
- ctl_grp = CTL_FCC;
-
- if (ctl_grp != CTL_FCC)
- /* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */
- return;
-
- if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
- modes = mode_list_2ghz;
- nr_modes = ARRAY_SIZE(mode_list_2ghz);
- } else {
- modes = mode_list_5ghz;
- nr_modes = ARRAY_SIZE(mode_list_5ghz);
- }
-
- for (i = 0; i < nr_modes; i++) {
- u8 c = ctl_grp | modes[i].ctl_mode;
- for (ctl_idx = 0; ctl_idx < AR5416_NUM_CTLS; ctl_idx++)
- if (c == ar->eeprom.ctl_index[ctl_idx])
- break;
- if (ctl_idx < AR5416_NUM_CTLS) {
- int f_off = 0;
-
- /* determine heav clip parameter from
- the 11G edges array */
- if (modes[i].ctl_mode == CTL_11G) {
- ar->phy_heavy_clip =
- ar9170_get_heavy_clip(ar,
- EDGES(ctl_idx, 1),
- freq, bw);
- }
-
- /* adjust freq for 40MHz */
- if (modes[i].ctl_mode == CTL_2GHT40 ||
- modes[i].ctl_mode == CTL_5GHT40) {
- if (bw == AR9170_BW_40_BELOW)
- f_off = -10;
- else
- f_off = 10;
- }
-
- modes[i].max_power =
- ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
- freq+f_off);
-
- /*
- * TODO: check if the regulatory max. power is
- * controlled by cfg80211 for DFS
- * (hpmain applies it to max_power itself for DFS freq)
- */
-
- } else {
- /*
- * Workaround in otus driver, hpmain.c, line 3906:
- * if no data for 5GHT20 are found, take the
- * legacy 5G value.
- * We extend this here to fallback from any other *HT or
- * 11G, too.
- */
- int k = i;
-
- modes[i].max_power = AR5416_MAX_RATE_POWER;
- while (k-- > 0) {
- if (modes[k].max_power !=
- AR5416_MAX_RATE_POWER) {
- modes[i].max_power = modes[k].max_power;
- break;
- }
- }
- }
-
- /* apply max power to pwr_cal_data (ar->power_*) */
- for (j = 0; j < modes[i].pwr_cal_len; j++) {
- modes[i].pwr_cal_data[j] = min(modes[i].pwr_cal_data[j],
- modes[i].max_power);
- }
- }
-
- if (ar->phy_heavy_clip & 0xf0) {
- ar->power_2G_ht40[0]--;
- ar->power_2G_ht40[1]--;
- ar->power_2G_ht40[2]--;
- }
- if (ar->phy_heavy_clip & 0xf) {
- ar->power_2G_ht20[0]++;
- ar->power_2G_ht20[1]++;
- ar->power_2G_ht20[2]++;
- }
-
-
-#undef EDGES
-}
-
-static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
-{
- struct ar9170_calibration_target_power_legacy *ctpl;
- struct ar9170_calibration_target_power_ht *ctph;
- u8 *ctpres;
- int ntargets;
- int idx, i, n;
- u8 ackpower, ackchains, f;
- u8 pwr_freqs[AR5416_MAX_NUM_TGT_PWRS];
-
- if (freq < 3000)
- f = freq - 2300;
- else
- f = (freq - 4800)/5;
-
- /*
- * cycle through the various modes
- *
- * legacy modes first: 5G, 2G CCK, 2G OFDM
- */
- for (i = 0; i < 3; i++) {
- switch (i) {
- case 0: /* 5 GHz legacy */
- ctpl = &ar->eeprom.cal_tgt_pwr_5G[0];
- ntargets = AR5416_NUM_5G_TARGET_PWRS;
- ctpres = ar->power_5G_leg;
- break;
- case 1: /* 2.4 GHz CCK */
- ctpl = &ar->eeprom.cal_tgt_pwr_2G_cck[0];
- ntargets = AR5416_NUM_2G_CCK_TARGET_PWRS;
- ctpres = ar->power_2G_cck;
- break;
- case 2: /* 2.4 GHz OFDM */
- ctpl = &ar->eeprom.cal_tgt_pwr_2G_ofdm[0];
- ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS;
- ctpres = ar->power_2G_ofdm;
- break;
- default:
- BUG();
- }
-
- for (n = 0; n < ntargets; n++) {
- if (ctpl[n].freq == 0xff)
- break;
- pwr_freqs[n] = ctpl[n].freq;
- }
- ntargets = n;
- idx = ar9170_find_freq_idx(ntargets, pwr_freqs, f);
- for (n = 0; n < 4; n++)
- ctpres[n] = ar9170_interpolate_u8(
- f,
- ctpl[idx + 0].freq,
- ctpl[idx + 0].power[n],
- ctpl[idx + 1].freq,
- ctpl[idx + 1].power[n]);
- }
-
- /*
- * HT modes now: 5G HT20, 5G HT40, 2G CCK, 2G OFDM, 2G HT20, 2G HT40
- */
- for (i = 0; i < 4; i++) {
- switch (i) {
- case 0: /* 5 GHz HT 20 */
- ctph = &ar->eeprom.cal_tgt_pwr_5G_ht20[0];
- ntargets = AR5416_NUM_5G_TARGET_PWRS;
- ctpres = ar->power_5G_ht20;
- break;
- case 1: /* 5 GHz HT 40 */
- ctph = &ar->eeprom.cal_tgt_pwr_5G_ht40[0];
- ntargets = AR5416_NUM_5G_TARGET_PWRS;
- ctpres = ar->power_5G_ht40;
- break;
- case 2: /* 2.4 GHz HT 20 */
- ctph = &ar->eeprom.cal_tgt_pwr_2G_ht20[0];
- ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS;
- ctpres = ar->power_2G_ht20;
- break;
- case 3: /* 2.4 GHz HT 40 */
- ctph = &ar->eeprom.cal_tgt_pwr_2G_ht40[0];
- ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS;
- ctpres = ar->power_2G_ht40;
- break;
- default:
- BUG();
- }
-
- for (n = 0; n < ntargets; n++) {
- if (ctph[n].freq == 0xff)
- break;
- pwr_freqs[n] = ctph[n].freq;
- }
- ntargets = n;
- idx = ar9170_find_freq_idx(ntargets, pwr_freqs, f);
- for (n = 0; n < 8; n++)
- ctpres[n] = ar9170_interpolate_u8(
- f,
- ctph[idx + 0].freq,
- ctph[idx + 0].power[n],
- ctph[idx + 1].freq,
- ctph[idx + 1].power[n]);
- }
-
-
- /* calc. conformance test limits and apply to ar->power*[] */
- ar9170_calc_ctl(ar, freq, bw);
-
- /* set ACK/CTS TX power */
- ar9170_regwrite_begin(ar);
-
- if (ar->eeprom.tx_mask != 1)
- ackchains = AR9170_TX_PHY_TXCHAIN_2;
- else
- ackchains = AR9170_TX_PHY_TXCHAIN_1;
-
- if (freq < 3000)
- ackpower = ar->power_2G_ofdm[0] & 0x3f;
- else
- ackpower = ar->power_5G_leg[0] & 0x3f;
-
- ar9170_regwrite(0x1c3694, ackpower << 20 | ackchains << 26);
- ar9170_regwrite(0x1c3bb4, ackpower << 5 | ackchains << 11 |
- ackpower << 21 | ackchains << 27);
-
- ar9170_regwrite_finish();
- return ar9170_regwrite_result();
-}
-
-static int ar9170_calc_noise_dbm(u32 raw_noise)
-{
- if (raw_noise & 0x100)
- return ~((raw_noise & 0x0ff) >> 1);
- else
- return (raw_noise & 0xff) >> 1;
-}
-
-int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
- enum ar9170_rf_init_mode rfi, enum ar9170_bw bw)
-{
- const struct ar9170_phy_freq_params *freqpar;
- u32 cmd, tmp, offs;
- __le32 vals[8];
- int i, err;
- bool bandswitch;
-
- /* clear BB heavy clip enable */
- err = ar9170_write_reg(ar, 0x1c59e0, 0x200);
- if (err)
- return err;
-
- /* may be NULL at first setup */
- if (ar->channel)
- bandswitch = ar->channel->band != channel->band;
- else
- bandswitch = true;
-
- /* HW workaround */
- if (!ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] &&
- channel->center_freq <= 2417)
- bandswitch = true;
-
- err = ar->exec_cmd(ar, AR9170_CMD_FREQ_START, 0, NULL, 0, NULL);
- if (err)
- return err;
-
- if (rfi != AR9170_RFI_NONE || bandswitch) {
- u32 val = 0x400;
-
- if (rfi == AR9170_RFI_COLD)
- val = 0x800;
-
- /* warm/cold reset BB/ADDA */
- err = ar9170_write_reg(ar, 0x1d4004, val);
- if (err)
- return err;
-
- err = ar9170_write_reg(ar, 0x1d4004, 0x0);
- if (err)
- return err;
-
- err = ar9170_init_phy(ar, channel->band);
- if (err)
- return err;
-
- err = ar9170_init_rf_banks_0_7(ar,
- channel->band == IEEE80211_BAND_5GHZ);
- if (err)
- return err;
-
- cmd = AR9170_CMD_RF_INIT;
- } else {
- cmd = AR9170_CMD_FREQUENCY;
- }
-
- err = ar9170_init_rf_bank4_pwr(ar,
- channel->band == IEEE80211_BAND_5GHZ,
- channel->center_freq, bw);
- if (err)
- return err;
-
- switch (bw) {
- case AR9170_BW_20:
- tmp = 0x240;
- offs = 0;
- break;
- case AR9170_BW_40_BELOW:
- tmp = 0x2c4;
- offs = 3;
- break;
- case AR9170_BW_40_ABOVE:
- tmp = 0x2d4;
- offs = 1;
- break;
- default:
- BUG();
- return -ENOSYS;
- }
-
- if (ar->eeprom.tx_mask != 1)
- tmp |= 0x100;
-
- err = ar9170_write_reg(ar, 0x1c5804, tmp);
- if (err)
- return err;
-
- err = ar9170_set_freq_cal_data(ar, channel);
- if (err)
- return err;
-
- err = ar9170_set_power_cal(ar, channel->center_freq, bw);
- if (err)
- return err;
-
- freqpar = ar9170_get_hw_dyn_params(channel, bw);
-
- vals[0] = cpu_to_le32(channel->center_freq * 1000);
- vals[1] = cpu_to_le32(conf_is_ht40(&ar->hw->conf));
- vals[2] = cpu_to_le32(offs << 2 | 1);
- vals[3] = cpu_to_le32(freqpar->coeff_exp);
- vals[4] = cpu_to_le32(freqpar->coeff_man);
- vals[5] = cpu_to_le32(freqpar->coeff_exp_shgi);
- vals[6] = cpu_to_le32(freqpar->coeff_man_shgi);
- vals[7] = cpu_to_le32(1000);
-
- err = ar->exec_cmd(ar, cmd, sizeof(vals), (u8 *)vals,
- sizeof(vals), (u8 *)vals);
- if (err)
- return err;
-
- if (ar->phy_heavy_clip) {
- err = ar9170_write_reg(ar, 0x1c59e0,
- 0x200 | ar->phy_heavy_clip);
- if (err) {
- if (ar9170_nag_limiter(ar))
- wiphy_err(ar->hw->wiphy,
- "failed to set heavy clip\n");
- }
- }
-
- for (i = 0; i < 2; i++) {
- ar->noise[i] = ar9170_calc_noise_dbm(
- (le32_to_cpu(vals[2 + i]) >> 19) & 0x1ff);
-
- ar->noise[i + 2] = ar9170_calc_noise_dbm(
- (le32_to_cpu(vals[5 + i]) >> 23) & 0x1ff);
- }
-
- ar->channel = channel;
- return 0;
-}
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
deleted file mode 100644
index d3be6f9..0000000
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ /dev/null
@@ -1,1008 +0,0 @@
-/*
- * Atheros AR9170 driver
- *
- * USB - frontend
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, Christian Lamparter <chunkeey@web.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/device.h>
-#include <net/mac80211.h>
-#include "ar9170.h"
-#include "cmd.h"
-#include "hw.h"
-#include "usb.h"
-
-MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
-MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
-MODULE_FIRMWARE("ar9170.fw");
-
-enum ar9170_requirements {
- AR9170_REQ_FW1_ONLY = 1,
-};
-
-static struct usb_device_id ar9170_usb_ids[] = {
- /* Atheros 9170 */
- { USB_DEVICE(0x0cf3, 0x9170) },
- /* Atheros TG121N */
- { USB_DEVICE(0x0cf3, 0x1001) },
- /* TP-Link TL-WN821N v2 */
- { USB_DEVICE(0x0cf3, 0x1002) },
- /* 3Com Dual Band 802.11n USB Adapter */
- { USB_DEVICE(0x0cf3, 0x1010) },
- /* H3C Dual Band 802.11n USB Adapter */
- { USB_DEVICE(0x0cf3, 0x1011) },
- /* Cace Airpcap NX */
- { USB_DEVICE(0xcace, 0x0300) },
- /* D-Link DWA 160 A1 */
- { USB_DEVICE(0x07d1, 0x3c10) },
- /* D-Link DWA 160 A2 */
- { USB_DEVICE(0x07d1, 0x3a09) },
- /* Netgear WNA1000 */
- { USB_DEVICE(0x0846, 0x9040) },
- /* Netgear WNDA3100 */
- { USB_DEVICE(0x0846, 0x9010) },
- /* Netgear WN111 v2 */
- { USB_DEVICE(0x0846, 0x9001) },
- /* Zydas ZD1221 */
- { USB_DEVICE(0x0ace, 0x1221) },
- /* Proxim ORiNOCO 802.11n USB */
- { USB_DEVICE(0x1435, 0x0804) },
- /* WNC Generic 11n USB Dongle */
- { USB_DEVICE(0x1435, 0x0326) },
- /* ZyXEL NWD271N */
- { USB_DEVICE(0x0586, 0x3417) },
- /* Z-Com UB81 BG */
- { USB_DEVICE(0x0cde, 0x0023) },
- /* Z-Com UB82 ABG */
- { USB_DEVICE(0x0cde, 0x0026) },
- /* Sphairon Homelink 1202 */
- { USB_DEVICE(0x0cde, 0x0027) },
- /* Arcadyan WN7512 */
- { USB_DEVICE(0x083a, 0xf522) },
- /* Planex GWUS300 */
- { USB_DEVICE(0x2019, 0x5304) },
- /* IO-Data WNGDNUS2 */
- { USB_DEVICE(0x04bb, 0x093f) },
- /* AVM FRITZ!WLAN USB Stick N */
- { USB_DEVICE(0x057C, 0x8401) },
- /* NEC WL300NU-G */
- { USB_DEVICE(0x0409, 0x0249) },
- /* AVM FRITZ!WLAN USB Stick N 2.4 */
- { USB_DEVICE(0x057C, 0x8402), .driver_info = AR9170_REQ_FW1_ONLY },
- /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
- { USB_DEVICE(0x1668, 0x1200) },
-
- /* terminate */
- {}
-};
-MODULE_DEVICE_TABLE(usb, ar9170_usb_ids);
-
-static void ar9170_usb_submit_urb(struct ar9170_usb *aru)
-{
- struct urb *urb;
- unsigned long flags;
- int err;
-
- if (unlikely(!IS_STARTED(&aru->common)))
- return ;
-
- spin_lock_irqsave(&aru->tx_urb_lock, flags);
- if (atomic_read(&aru->tx_submitted_urbs) >= AR9170_NUM_TX_URBS) {
- spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
- return ;
- }
- atomic_inc(&aru->tx_submitted_urbs);
-
- urb = usb_get_from_anchor(&aru->tx_pending);
- if (!urb) {
- atomic_dec(&aru->tx_submitted_urbs);
- spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
-
- return ;
- }
- spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
-
- aru->tx_pending_urbs--;
- usb_anchor_urb(urb, &aru->tx_submitted);
-
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (unlikely(err)) {
- if (ar9170_nag_limiter(&aru->common))
- dev_err(&aru->udev->dev, "submit_urb failed (%d).\n",
- err);
-
- usb_unanchor_urb(urb);
- atomic_dec(&aru->tx_submitted_urbs);
- ar9170_tx_callback(&aru->common, urb->context);
- }
-
- usb_free_urb(urb);
-}
-
-static void ar9170_usb_tx_urb_complete_frame(struct urb *urb)
-{
- struct sk_buff *skb = urb->context;
- struct ar9170_usb *aru = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
-
- if (unlikely(!aru)) {
- dev_kfree_skb_irq(skb);
- return ;
- }
-
- atomic_dec(&aru->tx_submitted_urbs);
-
- ar9170_tx_callback(&aru->common, skb);
-
- ar9170_usb_submit_urb(aru);
-}
-
-static void ar9170_usb_tx_urb_complete(struct urb *urb)
-{
-}
-
-static void ar9170_usb_irq_completed(struct urb *urb)
-{
- struct ar9170_usb *aru = urb->context;
-
- switch (urb->status) {
- /* everything is fine */
- case 0:
- break;
-
- /* disconnect */
- case -ENOENT:
- case -ECONNRESET:
- case -ENODEV:
- case -ESHUTDOWN:
- goto free;
-
- default:
- goto resubmit;
- }
-
- ar9170_handle_command_response(&aru->common, urb->transfer_buffer,
- urb->actual_length);
-
-resubmit:
- usb_anchor_urb(urb, &aru->rx_submitted);
- if (usb_submit_urb(urb, GFP_ATOMIC)) {
- usb_unanchor_urb(urb);
- goto free;
- }
-
- return;
-
-free:
- usb_free_coherent(aru->udev, 64, urb->transfer_buffer, urb->transfer_dma);
-}
-
-static void ar9170_usb_rx_completed(struct urb *urb)
-{
- struct sk_buff *skb = urb->context;
- struct ar9170_usb *aru = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
- int err;
-
- if (!aru)
- goto free;
-
- switch (urb->status) {
- /* everything is fine */
- case 0:
- break;
-
- /* disconnect */
- case -ENOENT:
- case -ECONNRESET:
- case -ENODEV:
- case -ESHUTDOWN:
- goto free;
-
- default:
- goto resubmit;
- }
-
- skb_put(skb, urb->actual_length);
- ar9170_rx(&aru->common, skb);
-
-resubmit:
- skb_reset_tail_pointer(skb);
- skb_trim(skb, 0);
-
- usb_anchor_urb(urb, &aru->rx_submitted);
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (unlikely(err)) {
- usb_unanchor_urb(urb);
- goto free;
- }
-
- return ;
-
-free:
- dev_kfree_skb_irq(skb);
-}
-
-static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru,
- struct urb *urb, gfp_t gfp)
-{
- struct sk_buff *skb;
-
- skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE + 32, gfp);
- if (!skb)
- return -ENOMEM;
-
- /* reserve some space for mac80211's radiotap */
- skb_reserve(skb, 32);
-
- usb_fill_bulk_urb(urb, aru->udev,
- usb_rcvbulkpipe(aru->udev, AR9170_EP_RX),
- skb->data, min(skb_tailroom(skb),
- AR9170_MAX_RX_BUFFER_SIZE),
- ar9170_usb_rx_completed, skb);
-
- return 0;
-}
-
-static int ar9170_usb_alloc_rx_irq_urb(struct ar9170_usb *aru)
-{
- struct urb *urb = NULL;
- void *ibuf;
- int err = -ENOMEM;
-
- /* initialize interrupt endpoint */
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb)
- goto out;
-
- ibuf = usb_alloc_coherent(aru->udev, 64, GFP_KERNEL, &urb->transfer_dma);
- if (!ibuf)
- goto out;
-
- usb_fill_int_urb(urb, aru->udev,
- usb_rcvintpipe(aru->udev, AR9170_EP_IRQ), ibuf,
- 64, ar9170_usb_irq_completed, aru, 1);
- urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- usb_anchor_urb(urb, &aru->rx_submitted);
- err = usb_submit_urb(urb, GFP_KERNEL);
- if (err) {
- usb_unanchor_urb(urb);
- usb_free_coherent(aru->udev, 64, urb->transfer_buffer,
- urb->transfer_dma);
- }
-
-out:
- usb_free_urb(urb);
- return err;
-}
-
-static int ar9170_usb_alloc_rx_bulk_urbs(struct ar9170_usb *aru)
-{
- struct urb *urb;
- int i;
- int err = -EINVAL;
-
- for (i = 0; i < AR9170_NUM_RX_URBS; i++) {
- err = -ENOMEM;
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb)
- goto err_out;
-
- err = ar9170_usb_prep_rx_urb(aru, urb, GFP_KERNEL);
- if (err) {
- usb_free_urb(urb);
- goto err_out;
- }
-
- usb_anchor_urb(urb, &aru->rx_submitted);
- err = usb_submit_urb(urb, GFP_KERNEL);
- if (err) {
- usb_unanchor_urb(urb);
- dev_kfree_skb_any((void *) urb->transfer_buffer);
- usb_free_urb(urb);
- goto err_out;
- }
- usb_free_urb(urb);
- }
-
- /* the device now waiting for a firmware. */
- aru->common.state = AR9170_IDLE;
- return 0;
-
-err_out:
-
- usb_kill_anchored_urbs(&aru->rx_submitted);
- return err;
-}
-
-static int ar9170_usb_flush(struct ar9170 *ar)
-{
- struct ar9170_usb *aru = (void *) ar;
- struct urb *urb;
- int ret, err = 0;
-
- if (IS_STARTED(ar))
- aru->common.state = AR9170_IDLE;
-
- usb_wait_anchor_empty_timeout(&aru->tx_pending,
- msecs_to_jiffies(800));
- while ((urb = usb_get_from_anchor(&aru->tx_pending))) {
- ar9170_tx_callback(&aru->common, (void *) urb->context);
- usb_free_urb(urb);
- }
-
- /* lets wait a while until the tx - queues are dried out */
- ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
- msecs_to_jiffies(100));
- if (ret == 0)
- err = -ETIMEDOUT;
-
- usb_kill_anchored_urbs(&aru->tx_submitted);
-
- if (IS_ACCEPTING_CMD(ar))
- aru->common.state = AR9170_STARTED;
-
- return err;
-}
-
-static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru)
-{
- int err;
-
- aru->common.state = AR9170_UNKNOWN_STATE;
-
- err = ar9170_usb_flush(&aru->common);
- if (err)
- dev_err(&aru->udev->dev, "stuck tx urbs!\n");
-
- usb_poison_anchored_urbs(&aru->tx_submitted);
- usb_poison_anchored_urbs(&aru->rx_submitted);
-}
-
-static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
- unsigned int plen, void *payload,
- unsigned int outlen, void *out)
-{
- struct ar9170_usb *aru = (void *) ar;
- struct urb *urb = NULL;
- unsigned long flags;
- int err = -ENOMEM;
-
- if (unlikely(!IS_ACCEPTING_CMD(ar)))
- return -EPERM;
-
- if (WARN_ON(plen > AR9170_MAX_CMD_LEN - 4))
- return -EINVAL;
-
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (unlikely(!urb))
- goto err_free;
-
- ar->cmdbuf[0] = cpu_to_le32(plen);
- ar->cmdbuf[0] |= cpu_to_le32(cmd << 8);
- /* writing multiple regs fills this buffer already */
- if (plen && payload != (u8 *)(&ar->cmdbuf[1]))
- memcpy(&ar->cmdbuf[1], payload, plen);
-
- spin_lock_irqsave(&aru->common.cmdlock, flags);
- aru->readbuf = (u8 *)out;
- aru->readlen = outlen;
- spin_unlock_irqrestore(&aru->common.cmdlock, flags);
-
- usb_fill_int_urb(urb, aru->udev,
- usb_sndintpipe(aru->udev, AR9170_EP_CMD),
- aru->common.cmdbuf, plen + 4,
- ar9170_usb_tx_urb_complete, NULL, 1);
-
- usb_anchor_urb(urb, &aru->tx_submitted);
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (unlikely(err)) {
- usb_unanchor_urb(urb);
- usb_free_urb(urb);
- goto err_unbuf;
- }
- usb_free_urb(urb);
-
- err = wait_for_completion_timeout(&aru->cmd_wait, HZ);
- if (err == 0) {
- err = -ETIMEDOUT;
- goto err_unbuf;
- }
-
- if (aru->readlen != outlen) {
- err = -EMSGSIZE;
- goto err_unbuf;
- }
-
- return 0;
-
-err_unbuf:
- /* Maybe the device was removed in the second we were waiting? */
- if (IS_STARTED(ar)) {
- dev_err(&aru->udev->dev, "no command feedback "
- "received (%d).\n", err);
-
- /* provide some maybe useful debug information */
- print_hex_dump_bytes("ar9170 cmd: ", DUMP_PREFIX_NONE,
- aru->common.cmdbuf, plen + 4);
- dump_stack();
- }
-
- /* invalidate to avoid completing the next prematurely */
- spin_lock_irqsave(&aru->common.cmdlock, flags);
- aru->readbuf = NULL;
- aru->readlen = 0;
- spin_unlock_irqrestore(&aru->common.cmdlock, flags);
-
-err_free:
-
- return err;
-}
-
-static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
-{
- struct ar9170_usb *aru = (struct ar9170_usb *) ar;
- struct urb *urb;
-
- if (unlikely(!IS_STARTED(ar))) {
- /* Seriously, what were you drink... err... thinking!? */
- return -EPERM;
- }
-
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (unlikely(!urb))
- return -ENOMEM;
-
- usb_fill_bulk_urb(urb, aru->udev,
- usb_sndbulkpipe(aru->udev, AR9170_EP_TX),
- skb->data, skb->len,
- ar9170_usb_tx_urb_complete_frame, skb);
- urb->transfer_flags |= URB_ZERO_PACKET;
-
- usb_anchor_urb(urb, &aru->tx_pending);
- aru->tx_pending_urbs++;
-
- usb_free_urb(urb);
-
- ar9170_usb_submit_urb(aru);
- return 0;
-}
-
-static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
-{
- struct ar9170_usb *aru = (void *) ar;
- unsigned long flags;
- u32 in, out;
-
- if (unlikely(!buffer))
- return ;
-
- in = le32_to_cpup((__le32 *)buffer);
- out = le32_to_cpu(ar->cmdbuf[0]);
-
- /* mask off length byte */
- out &= ~0xFF;
-
- if (aru->readlen >= 0) {
- /* add expected length */
- out |= aru->readlen;
- } else {
- /* add obtained length */
- out |= in & 0xFF;
- }
-
- /*
- * Some commands (e.g: AR9170_CMD_FREQUENCY) have a variable response
- * length and we cannot predict the correct length in advance.
- * So we only check if we provided enough space for the data.
- */
- if (unlikely(out < in)) {
- dev_warn(&aru->udev->dev, "received invalid command response "
- "got %d bytes, instead of %d bytes "
- "and the resp length is %d bytes\n",
- in, out, len);
- print_hex_dump_bytes("ar9170 invalid resp: ",
- DUMP_PREFIX_OFFSET, buffer, len);
- /*
- * Do not complete, then the command times out,
- * and we get a stack trace from there.
- */
- return ;
- }
-
- spin_lock_irqsave(&aru->common.cmdlock, flags);
- if (aru->readbuf && len > 0) {
- memcpy(aru->readbuf, buffer + 4, len - 4);
- aru->readbuf = NULL;
- }
- complete(&aru->cmd_wait);
- spin_unlock_irqrestore(&aru->common.cmdlock, flags);
-}
-
-static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data,
- size_t len, u32 addr, bool complete)
-{
- int transfer, err;
- u8 *buf = kmalloc(4096, GFP_KERNEL);
-
- if (!buf)
- return -ENOMEM;
-
- while (len) {
- transfer = min_t(int, len, 4096);
- memcpy(buf, data, transfer);
-
- err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0),
- 0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
- addr >> 8, 0, buf, transfer, 1000);
-
- if (err < 0) {
- kfree(buf);
- return err;
- }
-
- len -= transfer;
- data += transfer;
- addr += transfer;
- }
- kfree(buf);
-
- if (complete) {
- err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0),
- 0x31 /* FW DL COMPLETE */,
- 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 5000);
- }
-
- return 0;
-}
-
-static int ar9170_usb_reset(struct ar9170_usb *aru)
-{
- int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING);
-
- if (lock) {
- ret = usb_lock_device_for_reset(aru->udev, aru->intf);
- if (ret < 0) {
- dev_err(&aru->udev->dev, "unable to lock device "
- "for reset (%d).\n", ret);
- return ret;
- }
- }
-
- ret = usb_reset_device(aru->udev);
- if (lock)
- usb_unlock_device(aru->udev);
-
- /* let it rest - for a second - */
- msleep(1000);
-
- return ret;
-}
-
-static int ar9170_usb_upload_firmware(struct ar9170_usb *aru)
-{
- int err;
-
- if (!aru->init_values)
- goto upload_fw_start;
-
- /* First, upload initial values to device RAM */
- err = ar9170_usb_upload(aru, aru->init_values->data,
- aru->init_values->size, 0x102800, false);
- if (err) {
- dev_err(&aru->udev->dev, "firmware part 1 "
- "upload failed (%d).\n", err);
- return err;
- }
-
-upload_fw_start:
-
- /* Then, upload the firmware itself and start it */
- return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size,
- 0x200000, true);
-}
-
-static int ar9170_usb_init_transport(struct ar9170_usb *aru)
-{
- struct ar9170 *ar = (void *) &aru->common;
- int err;
-
- ar9170_regwrite_begin(ar);
-
- /* Set USB Rx stream mode MAX packet number to 2 */
- ar9170_regwrite(AR9170_USB_REG_MAX_AGG_UPLOAD, 0x4);
-
- /* Set USB Rx stream mode timeout to 10us */
- ar9170_regwrite(AR9170_USB_REG_UPLOAD_TIME_CTL, 0x80);
-
- ar9170_regwrite_finish();
-
- err = ar9170_regwrite_result();
- if (err)
- dev_err(&aru->udev->dev, "USB setup failed (%d).\n", err);
-
- return err;
-}
-
-static void ar9170_usb_stop(struct ar9170 *ar)
-{
- struct ar9170_usb *aru = (void *) ar;
- int ret;
-
- if (IS_ACCEPTING_CMD(ar))
- aru->common.state = AR9170_STOPPED;
-
- ret = ar9170_usb_flush(ar);
- if (ret)
- dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
-
- usb_poison_anchored_urbs(&aru->tx_submitted);
-
- /*
- * Note:
- * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
- * Else we would end up with a unresponsive device...
- */
-}
-
-static int ar9170_usb_open(struct ar9170 *ar)
-{
- struct ar9170_usb *aru = (void *) ar;
- int err;
-
- usb_unpoison_anchored_urbs(&aru->tx_submitted);
- err = ar9170_usb_init_transport(aru);
- if (err) {
- usb_poison_anchored_urbs(&aru->tx_submitted);
- return err;
- }
-
- aru->common.state = AR9170_IDLE;
- return 0;
-}
-
-static int ar9170_usb_init_device(struct ar9170_usb *aru)
-{
- int err;
-
- err = ar9170_usb_alloc_rx_irq_urb(aru);
- if (err)
- goto err_out;
-
- err = ar9170_usb_alloc_rx_bulk_urbs(aru);
- if (err)
- goto err_unrx;
-
- err = ar9170_usb_upload_firmware(aru);
- if (err) {
- err = ar9170_echo_test(&aru->common, 0x60d43110);
- if (err) {
- /* force user invention, by disabling the device */
- err = usb_driver_set_configuration(aru->udev, -1);
- dev_err(&aru->udev->dev, "device is in a bad state. "
- "please reconnect it!\n");
- goto err_unrx;
- }
- }
-
- return 0;
-
-err_unrx:
- ar9170_usb_cancel_urbs(aru);
-
-err_out:
- return err;
-}
-
-static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
-{
- struct device *parent = aru->udev->dev.parent;
- struct usb_device *udev;
-
- /*
- * Store a copy of the usb_device pointer locally.
- * This is because device_release_driver initiates
- * ar9170_usb_disconnect, which in turn frees our
- * driver context (aru).
- */
- udev = aru->udev;
-
- complete(&aru->firmware_loading_complete);
-
- /* unbind anything failed */
- if (parent)
- device_lock(parent);
-
- device_release_driver(&udev->dev);
- if (parent)
- device_unlock(parent);
-
- usb_put_dev(udev);
-}
-
-static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)
-{
- struct ar9170_usb *aru = context;
- int err;
-
- aru->firmware = fw;
-
- if (!fw) {
- dev_err(&aru->udev->dev, "firmware file not found.\n");
- goto err_freefw;
- }
-
- err = ar9170_usb_init_device(aru);
- if (err)
- goto err_freefw;
-
- err = ar9170_usb_open(&aru->common);
- if (err)
- goto err_unrx;
-
- err = ar9170_register(&aru->common, &aru->udev->dev);
-
- ar9170_usb_stop(&aru->common);
- if (err)
- goto err_unrx;
-
- complete(&aru->firmware_loading_complete);
- usb_put_dev(aru->udev);
- return;
-
- err_unrx:
- ar9170_usb_cancel_urbs(aru);
-
- err_freefw:
- ar9170_usb_firmware_failed(aru);
-}
-
-static void ar9170_usb_firmware_inits(const struct firmware *fw,
- void *context)
-{
- struct ar9170_usb *aru = context;
- int err;
-
- if (!fw) {
- dev_err(&aru->udev->dev, "file with init values not found.\n");
- ar9170_usb_firmware_failed(aru);
- return;
- }
-
- aru->init_values = fw;
-
- /* ok so we have the init values -- get code for two-stage */
-
- err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-2.fw",
- &aru->udev->dev, GFP_KERNEL, aru,
- ar9170_usb_firmware_finish);
- if (err)
- ar9170_usb_firmware_failed(aru);
-}
-
-static void ar9170_usb_firmware_step2(const struct firmware *fw, void *context)
-{
- struct ar9170_usb *aru = context;
- int err;
-
- if (fw) {
- ar9170_usb_firmware_finish(fw, context);
- return;
- }
-
- if (aru->req_one_stage_fw) {
- dev_err(&aru->udev->dev, "ar9170.fw firmware file "
- "not found and is required for this device\n");
- ar9170_usb_firmware_failed(aru);
- return;
- }
-
- dev_err(&aru->udev->dev, "ar9170.fw firmware file "
- "not found, trying old firmware...\n");
-
- err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-1.fw",
- &aru->udev->dev, GFP_KERNEL, aru,
- ar9170_usb_firmware_inits);
- if (err)
- ar9170_usb_firmware_failed(aru);
-}
-
-static bool ar9170_requires_one_stage(const struct usb_device_id *id)
-{
- if (!id->driver_info)
- return false;
- if (id->driver_info == AR9170_REQ_FW1_ONLY)
- return true;
- return false;
-}
-
-static int ar9170_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct ar9170_usb *aru;
- struct ar9170 *ar;
- struct usb_device *udev;
- int err;
-
- aru = ar9170_alloc(sizeof(*aru));
- if (IS_ERR(aru)) {
- err = PTR_ERR(aru);
- goto out;
- }
-
- udev = interface_to_usbdev(intf);
- usb_get_dev(udev);
- aru->udev = udev;
- aru->intf = intf;
- ar = &aru->common;
-
- aru->req_one_stage_fw = ar9170_requires_one_stage(id);
-
- usb_set_intfdata(intf, aru);
- SET_IEEE80211_DEV(ar->hw, &intf->dev);
-
- init_usb_anchor(&aru->rx_submitted);
- init_usb_anchor(&aru->tx_pending);
- init_usb_anchor(&aru->tx_submitted);
- init_completion(&aru->cmd_wait);
- init_completion(&aru->firmware_loading_complete);
- spin_lock_init(&aru->tx_urb_lock);
-
- aru->tx_pending_urbs = 0;
- atomic_set(&aru->tx_submitted_urbs, 0);
-
- aru->common.stop = ar9170_usb_stop;
- aru->common.flush = ar9170_usb_flush;
- aru->common.open = ar9170_usb_open;
- aru->common.tx = ar9170_usb_tx;
- aru->common.exec_cmd = ar9170_usb_exec_cmd;
- aru->common.callback_cmd = ar9170_usb_callback_cmd;
-
-#ifdef CONFIG_PM
- udev->reset_resume = 1;
-#endif /* CONFIG_PM */
- err = ar9170_usb_reset(aru);
- if (err)
- goto err_freehw;
-
- usb_get_dev(aru->udev);
- return request_firmware_nowait(THIS_MODULE, 1, "ar9170.fw",
- &aru->udev->dev, GFP_KERNEL, aru,
- ar9170_usb_firmware_step2);
-err_freehw:
- usb_set_intfdata(intf, NULL);
- usb_put_dev(udev);
- ieee80211_free_hw(ar->hw);
-out:
- return err;
-}
-
-static void ar9170_usb_disconnect(struct usb_interface *intf)
-{
- struct ar9170_usb *aru = usb_get_intfdata(intf);
-
- if (!aru)
- return;
-
- aru->common.state = AR9170_IDLE;
-
- wait_for_completion(&aru->firmware_loading_complete);
-
- ar9170_unregister(&aru->common);
- ar9170_usb_cancel_urbs(aru);
-
- usb_put_dev(aru->udev);
- usb_set_intfdata(intf, NULL);
- ieee80211_free_hw(aru->common.hw);
-
- release_firmware(aru->init_values);
- release_firmware(aru->firmware);
-}
-
-#ifdef CONFIG_PM
-static int ar9170_suspend(struct usb_interface *intf,
- pm_message_t message)
-{
- struct ar9170_usb *aru = usb_get_intfdata(intf);
-
- if (!aru)
- return -ENODEV;
-
- aru->common.state = AR9170_IDLE;
- ar9170_usb_cancel_urbs(aru);
-
- return 0;
-}
-
-static int ar9170_resume(struct usb_interface *intf)
-{
- struct ar9170_usb *aru = usb_get_intfdata(intf);
- int err;
-
- if (!aru)
- return -ENODEV;
-
- usb_unpoison_anchored_urbs(&aru->rx_submitted);
- usb_unpoison_anchored_urbs(&aru->tx_submitted);
-
- err = ar9170_usb_init_device(aru);
- if (err)
- goto err_unrx;
-
- err = ar9170_usb_open(&aru->common);
- if (err)
- goto err_unrx;
-
- return 0;
-
-err_unrx:
- aru->common.state = AR9170_IDLE;
- ar9170_usb_cancel_urbs(aru);
-
- return err;
-}
-#endif /* CONFIG_PM */
-
-static struct usb_driver ar9170_driver = {
- .name = "ar9170usb",
- .probe = ar9170_usb_probe,
- .disconnect = ar9170_usb_disconnect,
- .id_table = ar9170_usb_ids,
- .soft_unbind = 1,
-#ifdef CONFIG_PM
- .suspend = ar9170_suspend,
- .resume = ar9170_resume,
- .reset_resume = ar9170_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init ar9170_init(void)
-{
- return usb_register(&ar9170_driver);
-}
-
-static void __exit ar9170_exit(void)
-{
- usb_deregister(&ar9170_driver);
-}
-
-module_init(ar9170_init);
-module_exit(ar9170_exit);
diff --git a/drivers/net/wireless/ath/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h
deleted file mode 100644
index 919b060..0000000
--- a/drivers/net/wireless/ath/ar9170/usb.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Atheros AR9170 USB driver
- *
- * Driver specific definitions
- *
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, Christian Lamparter <chunkeey@web.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, see
- * http://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and
- * permission notice:
- * Copyright (c) 2007-2008 Atheros Communications, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __USB_H
-#define __USB_H
-
-#include <linux/usb.h>
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-#include <linux/leds.h>
-#include <net/cfg80211.h>
-#include <net/mac80211.h>
-#include <linux/firmware.h>
-#include "eeprom.h"
-#include "hw.h"
-#include "ar9170.h"
-
-#define AR9170_NUM_RX_URBS 16
-#define AR9170_NUM_TX_URBS 8
-
-struct firmware;
-
-struct ar9170_usb {
- struct ar9170 common;
- struct usb_device *udev;
- struct usb_interface *intf;
-
- struct usb_anchor rx_submitted;
- struct usb_anchor tx_pending;
- struct usb_anchor tx_submitted;
-
- bool req_one_stage_fw;
-
- spinlock_t tx_urb_lock;
- atomic_t tx_submitted_urbs;
- unsigned int tx_pending_urbs;
-
- struct completion cmd_wait;
- struct completion firmware_loading_complete;
- int readlen;
- u8 *readbuf;
-
- const struct firmware *init_values;
- const struct firmware *firmware;
-};
-
-#endif /* __USB_H */
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index a6c6a46..7cf4317 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -119,17 +119,11 @@
void (*write)(void *, u32 val, u32 reg_offset);
void (*enable_write_buffer)(void *);
void (*write_flush) (void *);
+ u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr);
};
struct ath_common;
-
-struct ath_bus_ops {
- enum ath_bus_type ath_bus_type;
- void (*read_cachesize)(struct ath_common *common, int *csz);
- bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
- void (*bt_coex_prep)(struct ath_common *common);
- void (*extn_synch_en)(struct ath_common *common);
-};
+struct ath_bus_ops;
struct ath_common {
void *ah;
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
index 82324e9..ea99827 100644
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -18,6 +18,7 @@
#include <linux/nl80211.h>
#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
#include <ar231x_platform.h>
#include "ath5k.h"
#include "debug.h"
@@ -62,10 +63,27 @@
return 0;
}
+static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ struct ath5k_softc *sc = ah->ah_sc;
+ struct platform_device *pdev = to_platform_device(sc->dev);
+ struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+ u8 *cfg_mac;
+
+ if (to_platform_device(sc->dev)->id == 0)
+ cfg_mac = bcfg->config->wlan0_mac;
+ else
+ cfg_mac = bcfg->config->wlan1_mac;
+
+ memcpy(mac, cfg_mac, ETH_ALEN);
+ return 0;
+}
+
static const struct ath_bus_ops ath_ahb_bus_ops = {
.ath_bus_type = ATH_AHB,
.read_cachesize = ath5k_ahb_read_cachesize,
.eeprom_read = ath5k_ahb_eeprom_read,
+ .eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
};
/*Initialization*/
@@ -142,6 +160,16 @@
else
reg |= AR5K_AR5312_ENABLE_WLAN1;
__raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+
+ /*
+ * On a dual-band AR5312, the multiband radio is only
+ * used as pass-through. Disable 2 GHz support in the
+ * driver for it
+ */
+ if (to_platform_device(sc->dev)->id == 0 &&
+ (bcfg->config->flags & (BD_WLAN0|BD_WLAN1)) ==
+ (BD_WLAN1|BD_WLAN0))
+ __set_bit(ATH_STAT_2G_DISABLED, sc->status);
}
ret = ath5k_init_softc(sc, &ath_ahb_bus_ops);
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 8a06dbd..bb50700 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -224,8 +224,7 @@
/* SIFS */
#define AR5K_INIT_SIFS_TURBO 6
-/* XXX: 8 from initvals 10 from standard */
-#define AR5K_INIT_SIFS_DEFAULT_BG 8
+#define AR5K_INIT_SIFS_DEFAULT_BG 10
#define AR5K_INIT_SIFS_DEFAULT_A 16
#define AR5K_INIT_SIFS_HALF_RATE 32
#define AR5K_INIT_SIFS_QUARTER_RATE 64
@@ -453,12 +452,10 @@
u16 ts_seqnum;
u16 ts_tstamp;
u8 ts_status;
- u8 ts_rate[4];
- u8 ts_retry[4];
u8 ts_final_idx;
+ u8 ts_final_retry;
s8 ts_rssi;
u8 ts_shortretry;
- u8 ts_longretry;
u8 ts_virtcol;
u8 ts_antenna;
};
@@ -875,6 +872,19 @@
AR5K_INT_QTRIG = 0x40000000, /* Non common */
AR5K_INT_GLOBAL = 0x80000000,
+ AR5K_INT_TX_ALL = AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXEOL
+ | AR5K_INT_TXURN,
+
+ AR5K_INT_RX_ALL = AR5K_INT_RXOK
+ | AR5K_INT_RXDESC
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXNOFRM
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN,
+
AR5K_INT_COMMON = AR5K_INT_RXOK
| AR5K_INT_RXDESC
| AR5K_INT_RXERR
@@ -1058,6 +1068,7 @@
u8 ah_coverage_class;
bool ah_ack_bitrate_high;
u8 ah_bwmode;
+ bool ah_short_slot;
/* Antenna Control */
u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
@@ -1144,6 +1155,13 @@
struct ath5k_rx_status *);
};
+struct ath_bus_ops {
+ enum ath_bus_type ath_bus_type;
+ void (*read_cachesize)(struct ath_common *common, int *csz);
+ bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
+ int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac);
+};
+
/*
* Prototypes
*/
@@ -1227,13 +1245,12 @@
/* EEPROM access functions */
int ath5k_eeprom_init(struct ath5k_hw *ah);
void ath5k_eeprom_detach(struct ath5k_hw *ah);
-int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
/* Protocol Control Unit Functions */
/* Helpers */
int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
- int len, struct ieee80211_rate *rate);
+ int len, struct ieee80211_rate *rate, bool shortpre);
unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah);
unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah);
extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index bc82405..1588401 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -313,12 +313,17 @@
goto err;
}
+ if (test_bit(ATH_STAT_2G_DISABLED, sc->status)) {
+ __clear_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode);
+ __clear_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode);
+ }
+
/* Crypto settings */
common->keymax = (sc->ah->ah_version == AR5K_AR5210 ?
AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211);
if (srev >= AR5K_SREV_AR5212_V4 &&
- (ee->ee_version >= AR5K_EEPROM_VERSION_5_0 &&
+ (ee->ee_version < AR5K_EEPROM_VERSION_5_0 ||
!AR5K_EEPROM_AES_DIS(ee->ee_misc5)))
common->crypt_caps |= ATH_CRYPT_CAP_CIPHER_AESCCM;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 349a596..2204762 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1444,6 +1444,21 @@
}
static void
+ath5k_set_current_imask(struct ath5k_softc *sc)
+{
+ enum ath5k_int imask = sc->imask;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sc->irqlock, flags);
+ if (sc->rx_pending)
+ imask &= ~AR5K_INT_RX_ALL;
+ if (sc->tx_pending)
+ imask &= ~AR5K_INT_TX_ALL;
+ ath5k_hw_set_imr(sc->ah, imask);
+ spin_unlock_irqrestore(&sc->irqlock, flags);
+}
+
+static void
ath5k_tasklet_rx(unsigned long data)
{
struct ath5k_rx_status rs = {};
@@ -1506,6 +1521,8 @@
} while (ath5k_rxbuf_setup(sc, bf) == 0);
unlock:
spin_unlock(&sc->rxbuflock);
+ sc->rx_pending = false;
+ ath5k_set_current_imask(sc);
}
@@ -1573,28 +1590,28 @@
struct ath5k_txq *txq, struct ath5k_tx_status *ts)
{
struct ieee80211_tx_info *info;
+ u8 tries[3];
int i;
sc->stats.tx_all_count++;
sc->stats.tx_bytes_count += skb->len;
info = IEEE80211_SKB_CB(skb);
+ tries[0] = info->status.rates[0].count;
+ tries[1] = info->status.rates[1].count;
+ tries[2] = info->status.rates[2].count;
+
ieee80211_tx_info_clear_status(info);
- for (i = 0; i < 4; i++) {
+
+ for (i = 0; i < ts->ts_final_idx; i++) {
struct ieee80211_tx_rate *r =
&info->status.rates[i];
- if (ts->ts_rate[i]) {
- r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]);
- r->count = ts->ts_retry[i];
- } else {
- r->idx = -1;
- r->count = 0;
- }
+ r->count = tries[i];
}
- /* count the successful attempt as well */
- info->status.rates[ts->ts_final_idx].count++;
+ info->status.rates[ts->ts_final_idx].count = ts->ts_final_retry;
+ info->status.rates[ts->ts_final_idx + 1].idx = -1;
if (unlikely(ts->ts_status)) {
sc->stats.ack_fail++;
@@ -1609,6 +1626,9 @@
} else {
info->flags |= IEEE80211_TX_STAT_ACK;
info->status.ack_signal = ts->ts_rssi;
+
+ /* count the successful attempt as well */
+ info->status.rates[ts->ts_final_idx].count++;
}
/*
@@ -1690,6 +1710,9 @@
for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
ath5k_tx_processq(sc, &sc->txqs[i]);
+
+ sc->tx_pending = false;
+ ath5k_set_current_imask(sc);
}
@@ -2119,6 +2142,20 @@
* AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
}
+static void
+ath5k_schedule_rx(struct ath5k_softc *sc)
+{
+ sc->rx_pending = true;
+ tasklet_schedule(&sc->rxtq);
+}
+
+static void
+ath5k_schedule_tx(struct ath5k_softc *sc)
+{
+ sc->tx_pending = true;
+ tasklet_schedule(&sc->txtq);
+}
+
irqreturn_t
ath5k_intr(int irq, void *dev_id)
{
@@ -2161,7 +2198,7 @@
ieee80211_queue_work(sc->hw, &sc->reset_work);
}
else
- tasklet_schedule(&sc->rxtq);
+ ath5k_schedule_rx(sc);
} else {
if (status & AR5K_INT_SWBA) {
tasklet_hi_schedule(&sc->beacontq);
@@ -2179,10 +2216,10 @@
ath5k_hw_update_tx_triglevel(ah, true);
}
if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
- tasklet_schedule(&sc->rxtq);
+ ath5k_schedule_rx(sc);
if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
| AR5K_INT_TXERR | AR5K_INT_TXEOL))
- tasklet_schedule(&sc->txtq);
+ ath5k_schedule_tx(sc);
if (status & AR5K_INT_BMISS) {
/* TODO */
}
@@ -2201,6 +2238,9 @@
} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
+ if (sc->rx_pending || sc->tx_pending)
+ ath5k_set_current_imask(sc);
+
if (unlikely(!counter))
ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
@@ -2354,7 +2394,7 @@
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
spin_lock_init(&sc->block);
-
+ spin_lock_init(&sc->irqlock);
/* Setup interrupt handler */
ret = request_irq(sc->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
@@ -2572,6 +2612,8 @@
static void stop_tasklets(struct ath5k_softc *sc)
{
+ sc->rx_pending = false;
+ sc->tx_pending = false;
tasklet_kill(&sc->rxtq);
tasklet_kill(&sc->txtq);
tasklet_kill(&sc->calib);
@@ -2838,7 +2880,7 @@
INIT_WORK(&sc->reset_work, ath5k_reset_work);
INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work);
- ret = ath5k_eeprom_read_mac(ah, mac);
+ ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac);
if (ret) {
ATH5K_ERR(sc, "unable to read address from EEPROM\n");
goto err_queues;
@@ -2898,7 +2940,6 @@
* XXX: ??? detach ath5k_hw ???
* Other than that, it's straightforward...
*/
- ath5k_debug_finish_device(sc);
ieee80211_unregister_hw(hw);
ath5k_desc_free(sc);
ath5k_txq_release(sc);
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 978f1f4..b294f33 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -193,12 +193,13 @@
dma_addr_t desc_daddr; /* DMA (physical) address */
size_t desc_len; /* size of TX/RX descriptors */
- DECLARE_BITMAP(status, 5);
+ DECLARE_BITMAP(status, 6);
#define ATH_STAT_INVALID 0 /* disable hardware accesses */
#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */
#define ATH_STAT_PROMISC 2
#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */
#define ATH_STAT_STARTED 4 /* opened & irqs enabled */
+#define ATH_STAT_2G_DISABLED 5 /* multiband radio without 2G */
unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */
struct ieee80211_channel *curchan; /* current h/w channel */
@@ -207,6 +208,10 @@
enum ath5k_int imask; /* interrupt mask copy */
+ spinlock_t irqlock;
+ bool rx_pending; /* rx tasklet pending */
+ bool tx_pending; /* tx tasklet pending */
+
u8 lladdr[ETH_ALEN];
u8 bssidmask[ETH_ALEN];
diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
index f77e8a7..7dd88e1 100644
--- a/drivers/net/wireless/ath/ath5k/caps.c
+++ b/drivers/net/wireless/ath/ath5k/caps.c
@@ -94,6 +94,9 @@
}
}
+ if ((ah->ah_radio_5ghz_revision & 0xf0) == AR5K_SREV_RAD_2112)
+ __clear_bit(AR5K_MODE_11A, caps->cap_mode);
+
/* Set number of supported TX queues */
if (ah->ah_version == AR5K_AR5210)
caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES_NOQCU;
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index 0230f30..0bf7313 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -888,65 +888,38 @@
void
ath5k_debug_init_device(struct ath5k_softc *sc)
{
+ struct dentry *phydir;
+
sc->debug.level = ath5k_debug;
- sc->debug.debugfs_phydir = debugfs_create_dir("ath5k",
- sc->hw->wiphy->debugfsdir);
+ phydir = debugfs_create_dir("ath5k", sc->hw->wiphy->debugfsdir);
+ if (!phydir)
+ return;
- sc->debug.debugfs_debug = debugfs_create_file("debug",
- S_IWUSR | S_IRUSR,
- sc->debug.debugfs_phydir, sc, &fops_debug);
+ debugfs_create_file("debug", S_IWUSR | S_IRUSR, phydir, sc,
+ &fops_debug);
- sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUSR,
- sc->debug.debugfs_phydir, sc, &fops_registers);
+ debugfs_create_file("registers", S_IRUSR, phydir, sc, &fops_registers);
- sc->debug.debugfs_beacon = debugfs_create_file("beacon",
- S_IWUSR | S_IRUSR,
- sc->debug.debugfs_phydir, sc, &fops_beacon);
+ debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, sc,
+ &fops_beacon);
- sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR,
- sc->debug.debugfs_phydir, sc, &fops_reset);
+ debugfs_create_file("reset", S_IWUSR, phydir, sc, &fops_reset);
- sc->debug.debugfs_antenna = debugfs_create_file("antenna",
- S_IWUSR | S_IRUSR,
- sc->debug.debugfs_phydir, sc, &fops_antenna);
+ debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, sc,
+ &fops_antenna);
- sc->debug.debugfs_misc = debugfs_create_file("misc",
- S_IRUSR,
- sc->debug.debugfs_phydir, sc, &fops_misc);
+ debugfs_create_file("misc", S_IRUSR, phydir, sc, &fops_misc);
- sc->debug.debugfs_frameerrors = debugfs_create_file("frameerrors",
- S_IWUSR | S_IRUSR,
- sc->debug.debugfs_phydir, sc,
- &fops_frameerrors);
+ debugfs_create_file("frameerrors", S_IWUSR | S_IRUSR, phydir, sc,
+ &fops_frameerrors);
- sc->debug.debugfs_ani = debugfs_create_file("ani",
- S_IWUSR | S_IRUSR,
- sc->debug.debugfs_phydir, sc,
- &fops_ani);
+ debugfs_create_file("ani", S_IWUSR | S_IRUSR, phydir, sc, &fops_ani);
- sc->debug.debugfs_queue = debugfs_create_file("queue",
- S_IWUSR | S_IRUSR,
- sc->debug.debugfs_phydir, sc,
- &fops_queue);
+ debugfs_create_file("queue", S_IWUSR | S_IRUSR, phydir, sc,
+ &fops_queue);
}
-void
-ath5k_debug_finish_device(struct ath5k_softc *sc)
-{
- debugfs_remove(sc->debug.debugfs_debug);
- debugfs_remove(sc->debug.debugfs_registers);
- debugfs_remove(sc->debug.debugfs_beacon);
- debugfs_remove(sc->debug.debugfs_reset);
- debugfs_remove(sc->debug.debugfs_antenna);
- debugfs_remove(sc->debug.debugfs_misc);
- debugfs_remove(sc->debug.debugfs_frameerrors);
- debugfs_remove(sc->debug.debugfs_ani);
- debugfs_remove(sc->debug.debugfs_queue);
- debugfs_remove(sc->debug.debugfs_phydir);
-}
-
-
/* functions used in other places */
void
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index b0355ae..193dd2d 100644
--- a/drivers/net/wireless/ath/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -68,17 +68,6 @@
struct ath5k_dbg_info {
unsigned int level; /* debug level */
- /* debugfs entries */
- struct dentry *debugfs_phydir;
- struct dentry *debugfs_debug;
- struct dentry *debugfs_registers;
- struct dentry *debugfs_beacon;
- struct dentry *debugfs_reset;
- struct dentry *debugfs_antenna;
- struct dentry *debugfs_misc;
- struct dentry *debugfs_frameerrors;
- struct dentry *debugfs_ani;
- struct dentry *debugfs_queue;
};
/**
@@ -141,9 +130,6 @@
ath5k_debug_init_device(struct ath5k_softc *sc);
void
-ath5k_debug_finish_device(struct ath5k_softc *sc);
-
-void
ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah);
void
@@ -167,9 +153,6 @@
ath5k_debug_init_device(struct ath5k_softc *sc) {}
static inline void
-ath5k_debug_finish_device(struct ath5k_softc *sc) {}
-
-static inline void
ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {}
static inline void
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index a8fcc94..62172d5 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -185,6 +185,12 @@
struct ath5k_hw_4w_tx_ctl *tx_ctl;
unsigned int frame_len;
+ /*
+ * Use local variables for these to reduce load/store access on
+ * uncached memory
+ */
+ u32 txctl0 = 0, txctl1 = 0, txctl2 = 0, txctl3 = 0;
+
tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
/*
@@ -208,8 +214,9 @@
if (tx_power > AR5K_TUNE_MAX_TXPOWER)
tx_power = AR5K_TUNE_MAX_TXPOWER;
- /* Clear descriptor */
- memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
+ /* Clear descriptor status area */
+ memset(&desc->ud.ds_tx5212.tx_stat, 0,
+ sizeof(desc->ud.ds_tx5212.tx_stat));
/* Setup control descriptor */
@@ -221,7 +228,7 @@
if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
return -EINVAL;
- tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+ txctl0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
/* Verify and set buffer length */
@@ -232,21 +239,17 @@
if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
return -EINVAL;
- tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+ txctl1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
- tx_ctl->tx_control_0 |=
- AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
- AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
- tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
- AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
- tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
- tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+ txctl0 |= AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+ AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ txctl1 |= AR5K_REG_SM(type, AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+ txctl2 = AR5K_REG_SM(tx_tries0, AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+ txctl3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
#define _TX_FLAGS(_c, _flag) \
if (flags & AR5K_TXDESC_##_flag) { \
- tx_ctl->tx_control_##_c |= \
- AR5K_4W_TX_DESC_CTL##_c##_##_flag; \
+ txctl##_c |= AR5K_4W_TX_DESC_CTL##_c##_##_flag; \
}
_TX_FLAGS(0, CLRDMASK);
@@ -262,8 +265,8 @@
* WEP crap
*/
if (key_index != AR5K_TXKEYIX_INVALID) {
- tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
- tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
+ txctl0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ txctl1 |= AR5K_REG_SM(key_index,
AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX);
}
@@ -274,12 +277,16 @@
if ((flags & AR5K_TXDESC_RTSENA) &&
(flags & AR5K_TXDESC_CTSENA))
return -EINVAL;
- tx_ctl->tx_control_2 |= rtscts_duration &
- AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
- tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
+ txctl2 |= rtscts_duration & AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+ txctl3 |= AR5K_REG_SM(rtscts_rate,
AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
}
+ tx_ctl->tx_control_0 = txctl0;
+ tx_ctl->tx_control_1 = txctl1;
+ tx_ctl->tx_control_2 = txctl2;
+ tx_ctl->tx_control_3 = txctl3;
+
return 0;
}
@@ -364,7 +371,7 @@
AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
- ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+ ts->ts_final_retry = AR5K_REG_MS(tx_status->tx_status_0,
AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
/*TODO: ts->ts_virtcol + test*/
ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
@@ -373,9 +380,6 @@
AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
ts->ts_antenna = 1;
ts->ts_status = 0;
- ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0,
- AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
- ts->ts_retry[0] = ts->ts_longretry;
ts->ts_final_idx = 0;
if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
@@ -401,81 +405,48 @@
{
struct ath5k_hw_4w_tx_ctl *tx_ctl;
struct ath5k_hw_tx_status *tx_status;
+ u32 txstat0, txstat1;
tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
tx_status = &desc->ud.ds_tx5212.tx_stat;
+ txstat1 = ACCESS_ONCE(tx_status->tx_status_1);
+
/* No frame has been send or error */
- if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE)))
+ if (unlikely(!(txstat1 & AR5K_DESC_TX_STATUS1_DONE)))
return -EINPROGRESS;
+ txstat0 = ACCESS_ONCE(tx_status->tx_status_0);
+
/*
* Get descriptor status
*/
- ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+ ts->ts_tstamp = AR5K_REG_MS(txstat0,
AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
- ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+ ts->ts_shortretry = AR5K_REG_MS(txstat0,
AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
- ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+ ts->ts_final_retry = AR5K_REG_MS(txstat0,
AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
- ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+ ts->ts_seqnum = AR5K_REG_MS(txstat1,
AR5K_DESC_TX_STATUS1_SEQ_NUM);
- ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+ ts->ts_rssi = AR5K_REG_MS(txstat1,
AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
- ts->ts_antenna = (tx_status->tx_status_1 &
+ ts->ts_antenna = (txstat1 &
AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212) ? 2 : 1;
ts->ts_status = 0;
- ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1,
+ ts->ts_final_idx = AR5K_REG_MS(txstat1,
AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212);
- /* The longretry counter has the number of un-acked retries
- * for the final rate. To get the total number of retries
- * we have to add the retry counters for the other rates
- * as well
- */
- ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry;
- switch (ts->ts_final_idx) {
- case 3:
- ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3,
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
-
- ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
- ts->ts_longretry += ts->ts_retry[2];
- /* fall through */
- case 2:
- ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3,
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
-
- ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
- ts->ts_longretry += ts->ts_retry[1];
- /* fall through */
- case 1:
- ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3,
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
-
- ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
- ts->ts_longretry += ts->ts_retry[0];
- /* fall through */
- case 0:
- ts->ts_rate[0] = tx_ctl->tx_control_3 &
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
- break;
- }
-
/* TX error */
- if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
- if (tx_status->tx_status_0 &
- AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ if (!(txstat0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (txstat0 & AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
ts->ts_status |= AR5K_TXERR_XRETRY;
- if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ if (txstat0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
ts->ts_status |= AR5K_TXERR_FIFO;
- if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ if (txstat0 & AR5K_DESC_TX_STATUS0_FILTERED)
ts->ts_status |= AR5K_TXERR_FILT;
}
@@ -609,37 +580,37 @@
struct ath5k_rx_status *rs)
{
struct ath5k_hw_rx_status *rx_status;
+ u32 rxstat0, rxstat1;
rx_status = &desc->ud.ds_rx.rx_stat;
+ rxstat1 = ACCESS_ONCE(rx_status->rx_status_1);
/* No frame received / not ready */
- if (unlikely(!(rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_DONE)))
+ if (unlikely(!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_DONE)))
return -EINPROGRESS;
memset(rs, 0, sizeof(struct ath5k_rx_status));
+ rxstat0 = ACCESS_ONCE(rx_status->rx_status_0);
/*
* Frame receive status
*/
- rs->rs_datalen = rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
- rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+ rs->rs_datalen = rxstat0 & AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rxstat0,
AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
- rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+ rs->rs_rate = AR5K_REG_MS(rxstat0,
AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
- rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0,
+ rs->rs_antenna = AR5K_REG_MS(rxstat0,
AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA);
- rs->rs_more = !!(rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_MORE);
- rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+ rs->rs_more = !!(rxstat0 & AR5K_5212_RX_DESC_STATUS0_MORE);
+ rs->rs_tstamp = AR5K_REG_MS(rxstat1,
AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
/*
* Key table status
*/
- if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
- rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rxstat1,
AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
else
rs->rs_keyix = AR5K_RXKEYIX_INVALID;
@@ -647,27 +618,22 @@
/*
* Receive/descriptor errors
*/
- if (!(rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
+ if (!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
rs->rs_status |= AR5K_RXERR_CRC;
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1,
+ rs->rs_phyerr = AR5K_REG_MS(rxstat1,
AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE);
if (!ah->ah_capabilities.cap_has_phyerr_counters)
ath5k_ani_phy_error_report(ah, rs->rs_phyerr);
}
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
rs->rs_status |= AR5K_RXERR_DECRYPT;
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
+ if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
rs->rs_status |= AR5K_RXERR_MIC;
}
return 0;
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index efb672c..1fef84f 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -660,6 +660,53 @@
vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100;
}
+static int
+ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *chinfo;
+ u8 pier, pdg;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+ if (!chinfo[pier].pd_curves)
+ continue;
+
+ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[pdg];
+
+ if (pd != NULL) {
+ kfree(pd->pd_step);
+ kfree(pd->pd_pwr);
+ }
+ }
+
+ kfree(chinfo[pier].pd_curves);
+ }
+
+ return 0;
+}
+
/* Convert RF5111 specific data to generic raw data
* used by interpolation code */
static int
@@ -684,7 +731,7 @@
GFP_KERNEL);
if (!chinfo[pier].pd_curves)
- return -ENOMEM;
+ goto err_out;
/* Only one curve for RF5111
* find out which one and place
@@ -708,12 +755,12 @@
pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
sizeof(u8), GFP_KERNEL);
if (!pd->pd_step)
- return -ENOMEM;
+ goto err_out;
pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
sizeof(s16), GFP_KERNEL);
if (!pd->pd_pwr)
- return -ENOMEM;
+ goto err_out;
/* Fill raw dataset
* (convert power to 0.25dB units
@@ -734,6 +781,10 @@
}
return 0;
+
+err_out:
+ ath5k_eeprom_free_pcal_info(ah, mode);
+ return -ENOMEM;
}
/* Parse EEPROM data */
@@ -867,7 +918,7 @@
GFP_KERNEL);
if (!chinfo[pier].pd_curves)
- return -ENOMEM;
+ goto err_out;
/* Fill pd_curves */
for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
@@ -886,14 +937,13 @@
sizeof(u8), GFP_KERNEL);
if (!pd->pd_step)
- return -ENOMEM;
+ goto err_out;
pd->pd_pwr = kcalloc(pd->pd_points,
sizeof(s16), GFP_KERNEL);
if (!pd->pd_pwr)
- return -ENOMEM;
-
+ goto err_out;
/* Fill raw dataset
* (all power levels are in 0.25dB units) */
@@ -925,13 +975,13 @@
sizeof(u8), GFP_KERNEL);
if (!pd->pd_step)
- return -ENOMEM;
+ goto err_out;
pd->pd_pwr = kcalloc(pd->pd_points,
sizeof(s16), GFP_KERNEL);
if (!pd->pd_pwr)
- return -ENOMEM;
+ goto err_out;
/* Fill raw dataset
* (all power levels are in 0.25dB units) */
@@ -954,6 +1004,10 @@
}
return 0;
+
+err_out:
+ ath5k_eeprom_free_pcal_info(ah, mode);
+ return -ENOMEM;
}
/* Parse EEPROM data */
@@ -1156,7 +1210,7 @@
GFP_KERNEL);
if (!chinfo[pier].pd_curves)
- return -ENOMEM;
+ goto err_out;
/* Fill pd_curves */
for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
@@ -1177,13 +1231,13 @@
sizeof(u8), GFP_KERNEL);
if (!pd->pd_step)
- return -ENOMEM;
+ goto err_out;
pd->pd_pwr = kcalloc(pd->pd_points,
sizeof(s16), GFP_KERNEL);
if (!pd->pd_pwr)
- return -ENOMEM;
+ goto err_out;
/* Fill raw dataset
* convert all pwr levels to
@@ -1213,6 +1267,10 @@
}
return 0;
+
+err_out:
+ ath5k_eeprom_free_pcal_info(ah, mode);
+ return -ENOMEM;
}
/* Parse EEPROM data */
@@ -1534,53 +1592,6 @@
return 0;
}
-static int
-ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
-{
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- struct ath5k_chan_pcal_info *chinfo;
- u8 pier, pdg;
-
- switch (mode) {
- case AR5K_EEPROM_MODE_11A:
- if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
- return 0;
- chinfo = ee->ee_pwr_cal_a;
- break;
- case AR5K_EEPROM_MODE_11B:
- if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
- return 0;
- chinfo = ee->ee_pwr_cal_b;
- break;
- case AR5K_EEPROM_MODE_11G:
- if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
- return 0;
- chinfo = ee->ee_pwr_cal_g;
- break;
- default:
- return -EINVAL;
- }
-
- for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
- if (!chinfo[pier].pd_curves)
- continue;
-
- for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
- struct ath5k_pdgain_info *pd =
- &chinfo[pier].pd_curves[pdg];
-
- if (pd != NULL) {
- kfree(pd->pd_step);
- kfree(pd->pd_pwr);
- }
- }
-
- kfree(chinfo[pier].pd_curves);
- }
-
- return 0;
-}
-
/* Read conformance test limits used for regulatory control */
static int
ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
@@ -1721,35 +1732,6 @@
return ret;
}
-/*
- * Read the MAC address from eeprom
- */
-int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
-{
- u8 mac_d[ETH_ALEN] = {};
- u32 total, offset;
- u16 data;
- int octet;
-
- AR5K_EEPROM_READ(0x20, data);
-
- for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
- AR5K_EEPROM_READ(offset, data);
-
- total += data;
- mac_d[octet + 1] = data & 0xff;
- mac_d[octet] = data >> 8;
- octet += 2;
- }
-
- if (!total || total == 3 * 0xffff)
- return -EINVAL;
-
- memcpy(mac, mac_d, ETH_ALEN);
-
- return 0;
-}
-
/***********************\
* Init/Detach functions *
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 9be29b7..807bd64 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -282,6 +282,15 @@
if (changes & BSS_CHANGED_BEACON_INT)
sc->bintval = bss_conf->beacon_int;
+ if (changes & BSS_CHANGED_ERP_SLOT) {
+ int slot_time;
+
+ ah->ah_short_slot = bss_conf->use_short_slot;
+ slot_time = ath5k_hw_get_default_slottime(ah) +
+ 3 * ah->ah_coverage_class;
+ ath5k_hw_set_ifs_intervals(ah, slot_time);
+ }
+
if (changes & BSS_CHANGED_ASSOC) {
avf->assoc = bss_conf->assoc;
if (bss_conf->assoc)
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 3c44689..296c316 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -17,6 +17,7 @@
#include <linux/nl80211.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
+#include <linux/etherdevice.h>
#include "../ath.h"
#include "ath5k.h"
#include "debug.h"
@@ -108,11 +109,42 @@
return 0;
}
+/*
+ * Read the MAC address from eeprom or platform_data
+ */
+static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ u8 mac_d[ETH_ALEN] = {};
+ u32 total, offset;
+ u16 data;
+ int octet;
+
+ AR5K_EEPROM_READ(0x20, data);
+
+ for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+ AR5K_EEPROM_READ(offset, data);
+
+ total += data;
+ mac_d[octet + 1] = data & 0xff;
+ mac_d[octet] = data >> 8;
+ octet += 2;
+ }
+
+ if (!total || total == 3 * 0xffff)
+ return -EINVAL;
+
+ memcpy(mac, mac_d, ETH_ALEN);
+
+ return 0;
+}
+
+
/* Common ath_bus_opts structure */
static const struct ath_bus_ops ath_pci_bus_ops = {
.ath_bus_type = ATH_PCI,
.read_cachesize = ath5k_pci_read_cachesize,
.eeprom_read = ath5k_pci_eeprom_read,
+ .eeprom_read_mac = ath5k_pci_eeprom_read_mac,
};
/********************\
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index d9b3f82..712a9ac 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -75,7 +75,7 @@
* bwmodes.
*/
int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
- int len, struct ieee80211_rate *rate)
+ int len, struct ieee80211_rate *rate, bool shortpre)
{
struct ath5k_softc *sc = ah->ah_sc;
int sifs, preamble, plcp_bits, sym_time;
@@ -84,9 +84,15 @@
/* Fallback */
if (!ah->ah_bwmode) {
- dur = ieee80211_generic_frame_duration(sc->hw,
- NULL, len, rate);
- return le16_to_cpu(dur);
+ __le16 raw_dur = ieee80211_generic_frame_duration(sc->hw,
+ NULL, len, rate);
+
+ /* subtract difference between long and short preamble */
+ dur = le16_to_cpu(raw_dur);
+ if (shortpre)
+ dur -= 96;
+
+ return dur;
}
bitrate = rate->bitrate;
@@ -145,9 +151,9 @@
slot_time = AR5K_INIT_SLOT_TIME_QUARTER_RATE;
break;
case AR5K_BWMODE_DEFAULT:
- slot_time = AR5K_INIT_SLOT_TIME_DEFAULT;
default:
- if (channel->hw_value & CHANNEL_CCK)
+ slot_time = AR5K_INIT_SLOT_TIME_DEFAULT;
+ if ((channel->hw_value & CHANNEL_CCK) && !ah->ah_short_slot)
slot_time = AR5K_INIT_SLOT_TIME_B;
break;
}
@@ -263,27 +269,14 @@
* actual rate for this rate. See mac80211 tx.c
* ieee80211_duration() for a brief description of
* what rate we should choose to TX ACKs. */
- tx_time = ath5k_hw_get_frame_duration(ah, 10, rate);
+ tx_time = ath5k_hw_get_frame_duration(ah, 10, rate, false);
ath5k_hw_reg_write(ah, tx_time, reg);
if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
continue;
- /*
- * We're not distinguishing short preamble here,
- * This is true, all we'll get is a longer value here
- * which is not necessarilly bad. We could use
- * export ieee80211_frame_duration() but that needs to be
- * fixed first to be properly used by mac802111 drivers:
- *
- * - remove erp stuff and let the routine figure ofdm
- * erp rates
- * - remove passing argument ieee80211_local as
- * drivers don't have access to it
- * - move drivers using ieee80211_generic_frame_duration()
- * to this
- */
+ tx_time = ath5k_hw_get_frame_duration(ah, 10, rate, true);
ath5k_hw_reg_write(ah, tx_time,
reg + (AR5K_SET_SHORT_PREAMBLE << 2));
}
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 3343fb9..b18c502 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -519,7 +519,7 @@
return -EINVAL;
sifs = ath5k_hw_get_default_sifs(ah);
- sifs_clock = ath5k_hw_htoclock(ah, sifs);
+ sifs_clock = ath5k_hw_htoclock(ah, sifs - 2);
/* EIFS
* Txtime of ack at lowest rate + SIFS + DIFS
@@ -550,7 +550,7 @@
else
rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[0];
- ack_tx_time = ath5k_hw_get_frame_duration(ah, 10, rate);
+ ack_tx_time = ath5k_hw_get_frame_duration(ah, 10, rate, false);
/* ack_tx_time includes an SIFS already */
eifs = ack_tx_time + sifs + 2 * slot_time;
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 8420689..3510de2 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -159,6 +159,11 @@
rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211);
/*
+ * Set default Tx frame to Tx data start delay
+ */
+ txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
+
+ /*
* 5210 initvals don't include usec settings
* so we need to use magic values here for
* tx/rx latencies
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index ad57a6d..d9ff841 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -5,7 +5,7 @@
config ATH9K
tristate "Atheros 802.11n wireless cards support"
- depends on PCI && MAC80211
+ depends on MAC80211
select ATH9K_HW
select MAC80211_LEDS
select LEDS_CLASS
@@ -23,6 +23,25 @@
If you choose to build a module, it'll be called ath9k.
+config ATH9K_PCI
+ bool "Atheros ath9k PCI/PCIe bus support"
+ depends on ATH9K && PCI
+ default PCI
+ ---help---
+ This option enables the PCI bus support in ath9k.
+
+ Say Y, if you have a compatible PCI/PCIe wireless card.
+
+config ATH9K_AHB
+ bool "Atheros ath9k AHB bus support"
+ depends on ATH9K
+ default n
+ ---help---
+ This option enables the AHB bus support in ath9k.
+
+ Say Y, if you have a SoC with a compatible built-in
+ wireless MAC. Say N if unsure.
+
config ATH9K_DEBUGFS
bool "Atheros ath9k debugging"
depends on ATH9K && DEBUG_FS
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 4d66ca8..05a6fad 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -6,8 +6,8 @@
xmit.o \
ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
-ath9k-$(CONFIG_PCI) += pci.o
-ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
+ath9k-$(CONFIG_ATH9K_PCI) += pci.o
+ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
obj-$(CONFIG_ATH9K) += ath9k.o
@@ -48,4 +48,6 @@
htc_drv_init.o \
htc_drv_gpio.o
+ath9k_htc-$(CONFIG_ATH9K_HTC_DEBUGFS) += htc_drv_debug.o
+
obj-$(CONFIG_ATH9K_HTC) += ath9k_htc.o
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 9cb0efa..6195639 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -21,6 +21,18 @@
#include <linux/ath9k_platform.h>
#include "ath9k.h"
+static const struct platform_device_id ath9k_platform_id_table[] = {
+ {
+ .name = "ath9k",
+ .driver_data = AR5416_AR9100_DEVID,
+ },
+ {
+ .name = "ar934x_wmac",
+ .driver_data = AR9300_DEVID_AR9340,
+ },
+ {},
+};
+
/* return bus cachesize in 4B word units */
static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
{
@@ -57,6 +69,7 @@
struct ath_softc *sc;
struct ieee80211_hw *hw;
struct resource *res;
+ const struct platform_device_id *id = platform_get_device_id(pdev);
int irq;
int ret = 0;
struct ath_hw *ah;
@@ -116,7 +129,7 @@
goto err_free_hw;
}
- ret = ath9k_init_device(AR5416_AR9100_DEVID, sc, 0x0, &ath_ahb_bus_ops);
+ ret = ath9k_init_device(id->driver_data, sc, 0x0, &ath_ahb_bus_ops);
if (ret) {
dev_err(&pdev->dev, "failed to initialize device\n");
goto err_irq;
@@ -165,8 +178,11 @@
.name = "ath9k",
.owner = THIS_MODULE,
},
+ .id_table = ath9k_platform_id_table,
};
+MODULE_DEVICE_TABLE(platform, ath9k_platform_id_table);
+
int ath_ahb_init(void)
{
return platform_driver_register(&ath_ahb_driver);
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 2e31c77..5a1f4f5 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -899,12 +899,6 @@
* check here default level should not modify INI setting.
*/
if (use_new_ani(ah)) {
- const struct ani_ofdm_level_entry *entry_ofdm;
- const struct ani_cck_level_entry *entry_cck;
-
- entry_ofdm = &ofdm_level_table[ATH9K_ANI_OFDM_DEF_LEVEL];
- entry_cck = &cck_level_table[ATH9K_ANI_CCK_DEF_LEVEL];
-
ah->aniperiod = ATH9K_ANI_PERIOD_NEW;
ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL_NEW;
} else {
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 106c0b0..4bf9dab 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -44,6 +44,34 @@
static const int m2ThreshExt_off = 127;
+static void ar5008_rf_bank_setup(u32 *bank, struct ar5416IniArray *array,
+ int col)
+{
+ int i;
+
+ for (i = 0; i < array->ia_rows; i++)
+ bank[i] = INI_RA(array, i, col);
+}
+
+
+#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) \
+ ar5008_write_rf_array(ah, iniarray, regData, &(regWr))
+
+static void ar5008_write_rf_array(struct ath_hw *ah, struct ar5416IniArray *array,
+ u32 *data, unsigned int *writecnt)
+{
+ int r;
+
+ ENABLE_REGWRITE_BUFFER(ah);
+
+ for (r = 0; r < array->ia_rows; r++) {
+ REG_WRITE(ah, INI_RA(array, r, 0), data[r]);
+ DO_DELAY(*writecnt);
+ }
+
+ REGWRITE_BUFFER_FLUSH(ah);
+}
+
/**
* ar5008_hw_phy_modify_rx_buffer() - perform analog swizzling of parameters
* @rfbuf:
@@ -530,16 +558,16 @@
eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV);
/* Setup Bank 0 Write */
- RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1);
+ ar5008_rf_bank_setup(ah->analogBank0Data, &ah->iniBank0, 1);
/* Setup Bank 1 Write */
- RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1);
+ ar5008_rf_bank_setup(ah->analogBank1Data, &ah->iniBank1, 1);
/* Setup Bank 2 Write */
- RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1);
+ ar5008_rf_bank_setup(ah->analogBank2Data, &ah->iniBank2, 1);
/* Setup Bank 6 Write */
- RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3,
+ ar5008_rf_bank_setup(ah->analogBank3Data, &ah->iniBank3,
modesIndex);
{
int i;
@@ -569,7 +597,7 @@
}
/* Setup Bank 7 Setup */
- RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1);
+ ar5008_rf_bank_setup(ah->analogBank7Data, &ah->iniBank7, 1);
/* Write Analog registers */
REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data,
@@ -729,6 +757,7 @@
struct ath9k_channel *chan)
{
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ath_common *common = ath9k_hw_common(ah);
int i, regWrites = 0;
struct ieee80211_channel *channel = chan->chan;
u32 modesIndex, freqIndex;
@@ -805,7 +834,8 @@
REG_WRITE(ah, reg, val);
if (reg >= 0x7800 && reg < 0x78a0
- && ah->config.analog_shiftreg) {
+ && ah->config.analog_shiftreg
+ && (common->bus_ops->ath_bus_type != ATH_USB)) {
udelay(100);
}
@@ -835,7 +865,8 @@
REG_WRITE(ah, reg, val);
if (reg >= 0x7800 && reg < 0x78a0
- && ah->config.analog_shiftreg) {
+ && ah->config.analog_shiftreg
+ && (common->bus_ops->ath_bus_type != ATH_USB)) {
udelay(100);
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 76388c6..cb611b2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -26,6 +26,27 @@
IQ_MISMATCH_CAL = BIT(2),
};
+static bool ar9002_hw_is_cal_supported(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ enum ar9002_cal_types cal_type)
+{
+ bool supported = false;
+ switch (ah->supp_cals & cal_type) {
+ case IQ_MISMATCH_CAL:
+ /* Run IQ Mismatch for non-CCK only */
+ if (!IS_CHAN_B(chan))
+ supported = true;
+ break;
+ case ADC_GAIN_CAL:
+ case ADC_DC_CAL:
+ /* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */
+ if (!IS_CHAN_B(chan) &&
+ !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
+ supported = true;
+ break;
+ }
+ return supported;
+}
static void ar9002_hw_setup_calibration(struct ath_hw *ah,
struct ath9k_cal_list *currCal)
@@ -858,26 +879,32 @@
if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
ah->supp_cals = IQ_MISMATCH_CAL;
- if (AR_SREV_9160_10_OR_LATER(ah) &&
- !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan))) {
+ if (AR_SREV_9160_10_OR_LATER(ah))
ah->supp_cals |= ADC_GAIN_CAL | ADC_DC_CAL;
+ if (AR_SREV_9287(ah))
+ ah->supp_cals &= ~ADC_GAIN_CAL;
+ if (ar9002_hw_is_cal_supported(ah, chan, ADC_GAIN_CAL)) {
INIT_CAL(&ah->adcgain_caldata);
INSERT_CAL(ah, &ah->adcgain_caldata);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "enabling ADC Gain Calibration.\n");
+ "enabling ADC Gain Calibration.\n");
+ }
+ if (ar9002_hw_is_cal_supported(ah, chan, ADC_DC_CAL)) {
INIT_CAL(&ah->adcdc_caldata);
INSERT_CAL(ah, &ah->adcdc_caldata);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "enabling ADC DC Calibration.\n");
+ "enabling ADC DC Calibration.\n");
}
- INIT_CAL(&ah->iq_caldata);
- INSERT_CAL(ah, &ah->iq_caldata);
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "enabling IQ Calibration.\n");
+ if (ar9002_hw_is_cal_supported(ah, chan, IQ_MISMATCH_CAL)) {
+ INIT_CAL(&ah->iq_caldata);
+ INSERT_CAL(ah, &ah->iq_caldata);
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "enabling IQ Calibration.\n");
+ }
ah->cal_list_curr = ah->cal_list;
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 399ab3b..7a332f1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -290,7 +290,6 @@
| (flags & ATH9K_TXDESC_VMF ? AR_VirtMoreFrag : 0)
| SM(txPower, AR_XmitPower)
| (flags & ATH9K_TXDESC_VEOL ? AR_VEOL : 0)
- | (flags & ATH9K_TXDESC_CLRDMASK ? AR_ClrDestMask : 0)
| (flags & ATH9K_TXDESC_INTREQ ? AR_TxIntrReq : 0)
| (keyIx != ATH9K_TXKEYIX_INVALID ? AR_DestIdxValid : 0);
@@ -311,6 +310,16 @@
}
}
+static void ar9002_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val)
+{
+ struct ar5416_desc *ads = AR5416DESC(ds);
+
+ if (val)
+ ads->ds_ctl0 |= AR_ClrDestMask;
+ else
+ ads->ds_ctl0 &= ~AR_ClrDestMask;
+}
+
static void ar9002_hw_set11n_ratescenario(struct ath_hw *ah, void *ds,
void *lastds,
u32 durUpdateEn, u32 rtsctsRate,
@@ -406,26 +415,6 @@
ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
}
-static void ar9002_hw_set11n_burstduration(struct ath_hw *ah, void *ds,
- u32 burstDuration)
-{
- struct ar5416_desc *ads = AR5416DESC(ds);
-
- ads->ds_ctl2 &= ~AR_BurstDur;
- ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
-}
-
-static void ar9002_hw_set11n_virtualmorefrag(struct ath_hw *ah, void *ds,
- u32 vmf)
-{
- struct ar5416_desc *ads = AR5416DESC(ds);
-
- if (vmf)
- ads->ds_ctl0 |= AR_VirtMoreFrag;
- else
- ads->ds_ctl0 &= ~AR_VirtMoreFrag;
-}
-
void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
u32 size, u32 flags)
{
@@ -458,6 +447,5 @@
ops->set11n_aggr_middle = ar9002_hw_set11n_aggr_middle;
ops->set11n_aggr_last = ar9002_hw_set11n_aggr_last;
ops->clr11n_aggr = ar9002_hw_clr11n_aggr;
- ops->set11n_burstduration = ar9002_hw_set11n_burstduration;
- ops->set11n_virtualmorefrag = ar9002_hw_set11n_virtualmorefrag;
+ ops->set_clrdmask = ar9002_hw_set_clrdmask;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 7d68d61..a57e963 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -517,23 +517,7 @@
}
}
-void ar9002_hw_attach_phy_ops(struct ath_hw *ah)
-{
- struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-
- priv_ops->set_rf_regs = NULL;
- priv_ops->rf_alloc_ext_banks = NULL;
- priv_ops->rf_free_ext_banks = NULL;
- priv_ops->rf_set_freq = ar9002_hw_set_channel;
- priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate;
- priv_ops->olc_init = ar9002_olc_init;
- priv_ops->compute_pll_control = ar9002_hw_compute_pll_control;
- priv_ops->do_getnf = ar9002_hw_do_getnf;
-
- ar9002_hw_set_nf_limits(ah);
-}
-
-void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah,
struct ath_hw_antcomb_conf *antconf)
{
u32 regval;
@@ -545,10 +529,11 @@
AR_PHY_9285_ANT_DIV_ALT_LNACONF_S;
antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >>
AR_PHY_9285_FAST_DIV_BIAS_S;
+ antconf->lna1_lna2_delta = -3;
+ antconf->div_group = 0;
}
-EXPORT_SYMBOL(ath9k_hw_antdiv_comb_conf_get);
-void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah,
struct ath_hw_antcomb_conf *antconf)
{
u32 regval;
@@ -566,4 +551,23 @@
REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval);
}
-EXPORT_SYMBOL(ath9k_hw_antdiv_comb_conf_set);
+
+void ar9002_hw_attach_phy_ops(struct ath_hw *ah)
+{
+ struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+ struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+
+ priv_ops->set_rf_regs = NULL;
+ priv_ops->rf_alloc_ext_banks = NULL;
+ priv_ops->rf_free_ext_banks = NULL;
+ priv_ops->rf_set_freq = ar9002_hw_set_channel;
+ priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate;
+ priv_ops->olc_init = ar9002_olc_init;
+ priv_ops->compute_pll_control = ar9002_hw_compute_pll_control;
+ priv_ops->do_getnf = ar9002_hw_do_getnf;
+
+ ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get;
+ ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set;
+
+ ar9002_hw_set_nf_limits(ah);
+}
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.h b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
index 37663db..47780ef 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
@@ -483,7 +483,11 @@
#define AR_PHY_TX_PWRCTRL_INIT_TX_GAIN 0x01F80000
#define AR_PHY_TX_PWRCTRL_INIT_TX_GAIN_S 19
+#define AR_PHY_TX_PWRCTRL8 0xa278
+
#define AR_PHY_TX_PWRCTRL9 0xa27C
+
+#define AR_PHY_TX_PWRCTRL10 0xa394
#define AR_PHY_TX_DESIRED_SCALE_CCK 0x00007C00
#define AR_PHY_TX_DESIRED_SCALE_CCK_S 10
#define AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL 0x80000000
@@ -495,6 +499,8 @@
#define AR_PHY_CH0_TX_PWRCTRL11 0xa398
#define AR_PHY_CH1_TX_PWRCTRL11 0xb398
+#define AR_PHY_CH0_TX_PWRCTRL12 0xa3dc
+#define AR_PHY_CH0_TX_PWRCTRL13 0xa3e0
#define AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP 0x0000FC00
#define AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP_S 10
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 9ecca93..f915a3d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -34,10 +34,10 @@
static const u32 ar9300Modes_lowest_ob_db_tx_gain_table_2p2[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a2dc, 0x00033800, 0x00033800, 0x00637800, 0x00637800},
- {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03838000, 0x03838000},
- {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03fc0000, 0x03fc0000},
- {0x0000a2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
@@ -119,14 +119,14 @@
{0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
{0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
{0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
- {0x0000b2dc, 0x00033800, 0x00033800, 0x00637800, 0x00637800},
- {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03838000, 0x03838000},
- {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03fc0000, 0x03fc0000},
- {0x0000b2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000c2dc, 0x00033800, 0x00033800, 0x00637800, 0x00637800},
- {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03838000, 0x03838000},
- {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03fc0000, 0x03fc0000},
- {0x0000c2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+ {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+ {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+ {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
{0x00016048, 0x62480001, 0x62480001, 0x62480001, 0x62480001},
{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
@@ -835,10 +835,10 @@
static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
- {0x0000a2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
- {0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000a2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
@@ -920,14 +920,14 @@
{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
- {0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
- {0x0000b2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
- {0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000b2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000c2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
- {0x0000c2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
- {0x0000c2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000c2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+ {0x0000c2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+ {0x0000c2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+ {0x0000c2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x00016044, 0x056db2e6, 0x056db2e6, 0x056db2e6, 0x056db2e6},
{0x00016048, 0xae480001, 0xae480001, 0xae480001, 0xae480001},
{0x00016068, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c},
@@ -941,10 +941,10 @@
static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p2[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a2dc, 0x01feee00, 0x01feee00, 0x00637800, 0x00637800},
- {0x0000a2e0, 0x0000f000, 0x0000f000, 0x03838000, 0x03838000},
- {0x0000a2e4, 0x01ff0000, 0x01ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000a2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
@@ -1026,14 +1026,14 @@
{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
- {0x0000b2dc, 0x01feee00, 0x01feee00, 0x00637800, 0x00637800},
- {0x0000b2e0, 0x0000f000, 0x0000f000, 0x03838000, 0x03838000},
- {0x0000b2e4, 0x01ff0000, 0x01ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000b2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000c2dc, 0x01feee00, 0x01feee00, 0x00637800, 0x00637800},
- {0x0000c2e0, 0x0000f000, 0x0000f000, 0x03838000, 0x03838000},
- {0x0000c2e4, 0x01ff0000, 0x01ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000c2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000b2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+ {0x0000c2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
+ {0x0000c2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
+ {0x0000c2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
+ {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x00016044, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
{0x00016048, 0x8e480001, 0x8e480001, 0x8e480001, 0x8e480001},
{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
@@ -1307,10 +1307,10 @@
static const u32 ar9300Modes_low_ob_db_tx_gain_table_2p2[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
- {0x0000a2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
- {0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000a2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
@@ -1329,21 +1329,21 @@
{0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
{0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
{0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
- {0x0000a544, 0x5302266c, 0x5302266c, 0x3f001861, 0x3f001861},
- {0x0000a548, 0x5702286c, 0x5702286c, 0x43001a81, 0x43001a81},
- {0x0000a54c, 0x5c02486b, 0x5c02486b, 0x47001a83, 0x47001a83},
- {0x0000a550, 0x61024a6c, 0x61024a6c, 0x4a001c84, 0x4a001c84},
- {0x0000a554, 0x66026a6c, 0x66026a6c, 0x4e001ce3, 0x4e001ce3},
- {0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x52001ce5, 0x52001ce5},
- {0x0000a55c, 0x7002708c, 0x7002708c, 0x56001ce9, 0x56001ce9},
- {0x0000a560, 0x7302b08a, 0x7302b08a, 0x5a001ceb, 0x5a001ceb},
- {0x0000a564, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
- {0x0000a568, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
- {0x0000a56c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
- {0x0000a570, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
- {0x0000a574, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
- {0x0000a578, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
- {0x0000a57c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+ {0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861},
+ {0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81},
+ {0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83},
+ {0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84},
+ {0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3},
+ {0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5},
+ {0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9},
+ {0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb},
+ {0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
@@ -1361,45 +1361,45 @@
{0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
{0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
{0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
- {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3f801861, 0x3f801861},
- {0x0000a5c8, 0x5782286c, 0x5782286c, 0x43801a81, 0x43801a81},
- {0x0000a5cc, 0x5c82486b, 0x5c82486b, 0x47801a83, 0x47801a83},
- {0x0000a5d0, 0x61824a6c, 0x61824a6c, 0x4a801c84, 0x4a801c84},
- {0x0000a5d4, 0x66826a6c, 0x66826a6c, 0x4e801ce3, 0x4e801ce3},
- {0x0000a5d8, 0x6b826e6c, 0x6b826e6c, 0x52801ce5, 0x52801ce5},
- {0x0000a5dc, 0x7082708c, 0x7082708c, 0x56801ce9, 0x56801ce9},
- {0x0000a5e0, 0x7382b08a, 0x7382b08a, 0x5a801ceb, 0x5a801ceb},
- {0x0000a5e4, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
- {0x0000a5e8, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
- {0x0000a5ec, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
- {0x0000a5f0, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
- {0x0000a5f4, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
- {0x0000a5f8, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
- {0x0000a5fc, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861},
+ {0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81},
+ {0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83},
+ {0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84},
+ {0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3},
+ {0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5},
+ {0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9},
+ {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb},
+ {0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
- {0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
- {0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
- {0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
- {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
- {0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
- {0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
- {0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
- {0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
- {0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
- {0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
- {0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
- {0x0000b2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
- {0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000b2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000c2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
- {0x0000c2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
- {0x0000c2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
- {0x0000c2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000},
+ {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501},
+ {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501},
+ {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03},
+ {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04},
+ {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04},
+ {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+ {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+ {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+ {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
{0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 4a4cd88..f276cb9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -18,13 +18,13 @@
#include "hw-ops.h"
#include "ar9003_phy.h"
-#define MPASS 3
#define MAX_MEASUREMENT 8
-#define MAX_DIFFERENCE 10
+#define MAX_MAG_DELTA 11
+#define MAX_PHS_DELTA 10
struct coeff {
- int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MPASS];
- int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MPASS];
+ int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
+ int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
int iqc_coeff[2];
};
@@ -185,17 +185,19 @@
/* Accumulate IQ cal measures for active chains */
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
- ah->totalPowerMeasI[i] +=
- REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
- ah->totalPowerMeasQ[i] +=
- REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
- ah->totalIqCorrMeas[i] +=
- (int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
- ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
- "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
- ah->cal_samples, i, ah->totalPowerMeasI[i],
- ah->totalPowerMeasQ[i],
- ah->totalIqCorrMeas[i]);
+ if (ah->txchainmask & BIT(i)) {
+ ah->totalPowerMeasI[i] +=
+ REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
+ ah->totalPowerMeasQ[i] +=
+ REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
+ ah->totalIqCorrMeas[i] +=
+ (int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
+ ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+ "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+ ah->cal_samples, i, ah->totalPowerMeasI[i],
+ ah->totalPowerMeasQ[i],
+ ah->totalIqCorrMeas[i]);
+ }
}
}
@@ -608,36 +610,48 @@
return true;
}
-static bool ar9003_hw_compute_closest_pass_and_avg(int *mp_coeff, int *mp_avg)
+static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
+ int max_delta)
{
- int diff[MPASS];
+ int mp_max = -64, max_idx = 0;
+ int mp_min = 63, min_idx = 0;
+ int mp_avg = 0, i, outlier_idx = 0;
- diff[0] = abs(mp_coeff[0] - mp_coeff[1]);
- diff[1] = abs(mp_coeff[1] - mp_coeff[2]);
- diff[2] = abs(mp_coeff[2] - mp_coeff[0]);
+ /* find min/max mismatch across all calibrated gains */
+ for (i = 0; i < nmeasurement; i++) {
+ mp_avg += mp_coeff[i];
+ if (mp_coeff[i] > mp_max) {
+ mp_max = mp_coeff[i];
+ max_idx = i;
+ } else if (mp_coeff[i] < mp_min) {
+ mp_min = mp_coeff[i];
+ min_idx = i;
+ }
+ }
- if (diff[0] > MAX_DIFFERENCE &&
- diff[1] > MAX_DIFFERENCE &&
- diff[2] > MAX_DIFFERENCE)
- return false;
+ /* find average (exclude max abs value) */
+ for (i = 0; i < nmeasurement; i++) {
+ if ((abs(mp_coeff[i]) < abs(mp_max)) ||
+ (abs(mp_coeff[i]) < abs(mp_min)))
+ mp_avg += mp_coeff[i];
+ }
+ mp_avg /= (nmeasurement - 1);
- if (diff[0] <= diff[1] && diff[0] <= diff[2])
- *mp_avg = (mp_coeff[0] + mp_coeff[1]) / 2;
- else if (diff[1] <= diff[2])
- *mp_avg = (mp_coeff[1] + mp_coeff[2]) / 2;
- else
- *mp_avg = (mp_coeff[2] + mp_coeff[0]) / 2;
-
- return true;
+ /* detect outlier */
+ if (abs(mp_max - mp_min) > max_delta) {
+ if (abs(mp_max - mp_avg) > abs(mp_min - mp_avg))
+ outlier_idx = max_idx;
+ else
+ outlier_idx = min_idx;
+ }
+ mp_coeff[outlier_idx] = mp_avg;
}
static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
u8 num_chains,
struct coeff *coeff)
{
- struct ath_common *common = ath9k_hw_common(ah);
int i, im, nmeasurement;
- int magnitude, phase;
u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
memset(tx_corr_coeff, 0, sizeof(tx_corr_coeff));
@@ -657,37 +671,28 @@
/* Load the average of 2 passes */
for (i = 0; i < num_chains; i++) {
- if (AR_SREV_9485(ah))
- nmeasurement = REG_READ_FIELD(ah,
- AR_PHY_TX_IQCAL_STATUS_B0_9485,
- AR_PHY_CALIBRATED_GAINS_0);
- else
- nmeasurement = REG_READ_FIELD(ah,
- AR_PHY_TX_IQCAL_STATUS_B0,
- AR_PHY_CALIBRATED_GAINS_0);
+ nmeasurement = REG_READ_FIELD(ah,
+ AR_PHY_TX_IQCAL_STATUS_B0,
+ AR_PHY_CALIBRATED_GAINS_0);
if (nmeasurement > MAX_MEASUREMENT)
nmeasurement = MAX_MEASUREMENT;
+ /* detect outlier only if nmeasurement > 1 */
+ if (nmeasurement > 1) {
+ /* Detect magnitude outlier */
+ ar9003_hw_detect_outlier(coeff->mag_coeff[i],
+ nmeasurement, MAX_MAG_DELTA);
+
+ /* Detect phase outlier */
+ ar9003_hw_detect_outlier(coeff->phs_coeff[i],
+ nmeasurement, MAX_PHS_DELTA);
+ }
+
for (im = 0; im < nmeasurement; im++) {
- /*
- * Determine which 2 passes are closest and compute avg
- * magnitude
- */
- if (!ar9003_hw_compute_closest_pass_and_avg(coeff->mag_coeff[i][im],
- &magnitude))
- goto disable_txiqcal;
- /*
- * Determine which 2 passes are closest and compute avg
- * phase
- */
- if (!ar9003_hw_compute_closest_pass_and_avg(coeff->phs_coeff[i][im],
- &phase))
- goto disable_txiqcal;
-
- coeff->iqc_coeff[0] = (magnitude & 0x7f) |
- ((phase & 0x7f) << 7);
+ coeff->iqc_coeff[0] = (coeff->mag_coeff[i][im] & 0x7f) |
+ ((coeff->phs_coeff[i][im] & 0x7f) << 7);
if ((im % 2) == 0)
REG_RMW_FIELD(ah, tx_corr_coeff[im][i],
@@ -707,141 +712,37 @@
return;
-disable_txiqcal:
- REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_3,
- AR_PHY_TX_IQCAL_CONTROL_3_IQCORR_EN, 0x0);
- REG_RMW_FIELD(ah, AR_PHY_RX_IQCAL_CORR_B0,
- AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x0);
-
- ath_dbg(common, ATH_DBG_CALIBRATE, "TX IQ Cal disabled\n");
}
-static void ar9003_hw_tx_iq_cal(struct ath_hw *ah)
+static bool ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
- static const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
- AR_PHY_TX_IQCAL_STATUS_B0,
- AR_PHY_TX_IQCAL_STATUS_B1,
- AR_PHY_TX_IQCAL_STATUS_B2,
- };
- static const u32 chan_info_tab[] = {
- AR_PHY_CHAN_INFO_TAB_0,
- AR_PHY_CHAN_INFO_TAB_1,
- AR_PHY_CHAN_INFO_TAB_2,
- };
- struct coeff coeff;
- s32 iq_res[6];
- s32 i, j, ip, im, nmeasurement;
- u8 nchains = get_streams(common->tx_chainmask);
-
- for (ip = 0; ip < MPASS; ip++) {
- REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
- AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT,
- DELPT);
- REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_START,
- AR_PHY_TX_IQCAL_START_DO_CAL,
- AR_PHY_TX_IQCAL_START_DO_CAL);
-
- if (!ath9k_hw_wait(ah, AR_PHY_TX_IQCAL_START,
- AR_PHY_TX_IQCAL_START_DO_CAL,
- 0, AH_WAIT_TIMEOUT)) {
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "Tx IQ Cal not complete.\n");
- goto TX_IQ_CAL_FAILED;
- }
-
- nmeasurement = REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_STATUS_B0,
- AR_PHY_CALIBRATED_GAINS_0);
- if (nmeasurement > MAX_MEASUREMENT)
- nmeasurement = MAX_MEASUREMENT;
-
- for (i = 0; i < nchains; i++) {
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "Doing Tx IQ Cal for chain %d.\n", i);
- for (im = 0; im < nmeasurement; im++) {
- if (REG_READ(ah, txiqcal_status[i]) &
- AR_PHY_TX_IQCAL_STATUS_FAILED) {
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "Tx IQ Cal failed for chain %d.\n", i);
- goto TX_IQ_CAL_FAILED;
- }
-
- for (j = 0; j < 3; j++) {
- u8 idx = 2 * j,
- offset = 4 * (3 * im + j);
-
- REG_RMW_FIELD(ah, AR_PHY_CHAN_INFO_MEMORY,
- AR_PHY_CHAN_INFO_TAB_S2_READ,
- 0);
-
- /* 32 bits */
- iq_res[idx] = REG_READ(ah,
- chan_info_tab[i] +
- offset);
-
- REG_RMW_FIELD(ah, AR_PHY_CHAN_INFO_MEMORY,
- AR_PHY_CHAN_INFO_TAB_S2_READ,
- 1);
-
- /* 16 bits */
- iq_res[idx+1] = 0xffff & REG_READ(ah,
- chan_info_tab[i] +
- offset);
-
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "IQ RES[%d]=0x%x IQ_RES[%d]=0x%x\n",
- idx, iq_res[idx], idx+1, iq_res[idx+1]);
- }
-
- if (!ar9003_hw_calc_iq_corr(ah, i, iq_res,
- coeff.iqc_coeff)) {
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "Failed in calculation of IQ correction.\n");
- goto TX_IQ_CAL_FAILED;
- }
- coeff.mag_coeff[i][im][ip] =
- coeff.iqc_coeff[0] & 0x7f;
- coeff.phs_coeff[i][im][ip] =
- (coeff.iqc_coeff[0] >> 7) & 0x7f;
-
- if (coeff.mag_coeff[i][im][ip] > 63)
- coeff.mag_coeff[i][im][ip] -= 128;
- if (coeff.phs_coeff[i][im][ip] > 63)
- coeff.phs_coeff[i][im][ip] -= 128;
-
- }
- }
- }
-
- ar9003_hw_tx_iqcal_load_avg_2_passes(ah, nchains, &coeff);
-
- return;
-
-TX_IQ_CAL_FAILED:
- ath_dbg(common, ATH_DBG_CALIBRATE, "Tx IQ Cal failed\n");
-}
-
-static void ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
-{
u8 tx_gain_forced;
- REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1_9485,
- AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT, DELPT);
tx_gain_forced = REG_READ_FIELD(ah, AR_PHY_TX_FORCED_GAIN,
AR_PHY_TXGAIN_FORCE);
if (tx_gain_forced)
REG_RMW_FIELD(ah, AR_PHY_TX_FORCED_GAIN,
AR_PHY_TXGAIN_FORCE, 0);
- REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_START_9485,
- AR_PHY_TX_IQCAL_START_DO_CAL_9485, 1);
+ REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_START,
+ AR_PHY_TX_IQCAL_START_DO_CAL, 1);
+
+ if (!ath9k_hw_wait(ah, AR_PHY_TX_IQCAL_START,
+ AR_PHY_TX_IQCAL_START_DO_CAL, 0,
+ AH_WAIT_TIMEOUT)) {
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "Tx IQ Cal is not completed.\n");
+ return false;
+ }
+ return true;
}
static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
- AR_PHY_TX_IQCAL_STATUS_B0_9485,
+ AR_PHY_TX_IQCAL_STATUS_B0,
AR_PHY_TX_IQCAL_STATUS_B1,
AR_PHY_TX_IQCAL_STATUS_B2,
};
@@ -853,7 +754,7 @@
struct coeff coeff;
s32 iq_res[6];
u8 num_chains = 0;
- int i, ip, im, j;
+ int i, im, j;
int nmeasurement;
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
@@ -861,71 +762,69 @@
num_chains++;
}
- for (ip = 0; ip < MPASS; ip++) {
- for (i = 0; i < num_chains; i++) {
- nmeasurement = REG_READ_FIELD(ah,
- AR_PHY_TX_IQCAL_STATUS_B0_9485,
- AR_PHY_CALIBRATED_GAINS_0);
- if (nmeasurement > MAX_MEASUREMENT)
- nmeasurement = MAX_MEASUREMENT;
+ for (i = 0; i < num_chains; i++) {
+ nmeasurement = REG_READ_FIELD(ah,
+ AR_PHY_TX_IQCAL_STATUS_B0,
+ AR_PHY_CALIBRATED_GAINS_0);
+ if (nmeasurement > MAX_MEASUREMENT)
+ nmeasurement = MAX_MEASUREMENT;
- for (im = 0; im < nmeasurement; im++) {
+ for (im = 0; im < nmeasurement; im++) {
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "Doing Tx IQ Cal for chain %d.\n", i);
+
+ if (REG_READ(ah, txiqcal_status[i]) &
+ AR_PHY_TX_IQCAL_STATUS_FAILED) {
ath_dbg(common, ATH_DBG_CALIBRATE,
- "Doing Tx IQ Cal for chain %d.\n", i);
-
- if (REG_READ(ah, txiqcal_status[i]) &
- AR_PHY_TX_IQCAL_STATUS_FAILED) {
- ath_dbg(common, ATH_DBG_CALIBRATE,
"Tx IQ Cal failed for chain %d.\n", i);
- goto tx_iqcal_fail;
- }
+ goto tx_iqcal_fail;
+ }
- for (j = 0; j < 3; j++) {
- u32 idx = 2 * j, offset = 4 * (3 * im + j);
+ for (j = 0; j < 3; j++) {
+ u32 idx = 2 * j, offset = 4 * (3 * im + j);
- REG_RMW_FIELD(ah,
+ REG_RMW_FIELD(ah,
AR_PHY_CHAN_INFO_MEMORY,
AR_PHY_CHAN_INFO_TAB_S2_READ,
0);
- /* 32 bits */
- iq_res[idx] = REG_READ(ah,
- chan_info_tab[i] +
- offset);
+ /* 32 bits */
+ iq_res[idx] = REG_READ(ah,
+ chan_info_tab[i] +
+ offset);
- REG_RMW_FIELD(ah,
+ REG_RMW_FIELD(ah,
AR_PHY_CHAN_INFO_MEMORY,
AR_PHY_CHAN_INFO_TAB_S2_READ,
1);
- /* 16 bits */
- iq_res[idx + 1] = 0xffff & REG_READ(ah,
- chan_info_tab[i] + offset);
+ /* 16 bits */
+ iq_res[idx + 1] = 0xffff & REG_READ(ah,
+ chan_info_tab[i] + offset);
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "IQ RES[%d]=0x%x"
- "IQ_RES[%d]=0x%x\n",
- idx, iq_res[idx], idx + 1,
- iq_res[idx + 1]);
- }
-
- if (!ar9003_hw_calc_iq_corr(ah, i, iq_res,
- coeff.iqc_coeff)) {
- ath_dbg(common, ATH_DBG_CALIBRATE,
- "Failed in calculation of IQ correction.\n");
- goto tx_iqcal_fail;
- }
-
- coeff.mag_coeff[i][im][ip] =
- coeff.iqc_coeff[0] & 0x7f;
- coeff.phs_coeff[i][im][ip] =
- (coeff.iqc_coeff[0] >> 7) & 0x7f;
-
- if (coeff.mag_coeff[i][im][ip] > 63)
- coeff.mag_coeff[i][im][ip] -= 128;
- if (coeff.phs_coeff[i][im][ip] > 63)
- coeff.phs_coeff[i][im][ip] -= 128;
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "IQ RES[%d]=0x%x"
+ "IQ_RES[%d]=0x%x\n",
+ idx, iq_res[idx], idx + 1,
+ iq_res[idx + 1]);
}
+
+ if (!ar9003_hw_calc_iq_corr(ah, i, iq_res,
+ coeff.iqc_coeff)) {
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "Failed in calculation of \
+ IQ correction.\n");
+ goto tx_iqcal_fail;
+ }
+
+ coeff.mag_coeff[i][im] = coeff.iqc_coeff[0] & 0x7f;
+ coeff.phs_coeff[i][im] =
+ (coeff.iqc_coeff[0] >> 7) & 0x7f;
+
+ if (coeff.mag_coeff[i][im] > 63)
+ coeff.mag_coeff[i][im] -= 128;
+ if (coeff.phs_coeff[i][im] > 63)
+ coeff.phs_coeff[i][im] -= 128;
}
}
ar9003_hw_tx_iqcal_load_avg_2_passes(ah, num_chains, &coeff);
@@ -940,31 +839,37 @@
struct ath9k_channel *chan)
{
struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_capabilities *pCap = &ah->caps;
int val;
+ bool txiqcal_done = false;
val = REG_READ(ah, AR_ENT_OTP);
ath_dbg(common, ATH_DBG_CALIBRATE, "ath9k: AR_ENT_OTP 0x%x\n", val);
- if (AR_SREV_9485(ah))
- ar9003_hw_set_chain_masks(ah, 0x1, 0x1);
- else if (val & AR_ENT_OTP_CHAIN2_DISABLE)
+ /* Configure rx/tx chains before running AGC/TxiQ cals */
+ if (val & AR_ENT_OTP_CHAIN2_DISABLE)
ar9003_hw_set_chain_masks(ah, 0x3, 0x3);
else
- /*
- * 0x7 = 0b111 , AR9003 needs to be configured for 3-chain
- * mode before running AGC/TxIQ cals
- */
- ar9003_hw_set_chain_masks(ah, 0x7, 0x7);
+ ar9003_hw_set_chain_masks(ah, pCap->rx_chainmask,
+ pCap->tx_chainmask);
/* Do Tx IQ Calibration */
- if (AR_SREV_9485(ah))
- ar9003_hw_tx_iq_cal_run(ah);
- else
- ar9003_hw_tx_iq_cal(ah);
+ REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
+ AR_PHY_TX_IQCAL_CONTROL_1_IQCORR_I_Q_COFF_DELPT,
+ DELPT);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
- udelay(5);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+ /*
+ * For AR9485 or later chips, TxIQ cal runs as part of
+ * AGC calibration
+ */
+ if (AR_SREV_9485_OR_LATER(ah))
+ txiqcal_done = true;
+ else {
+ txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+ udelay(5);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+ }
/* Calibrate the AGC */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
@@ -979,7 +884,7 @@
return false;
}
- if (AR_SREV_9485(ah))
+ if (txiqcal_done)
ar9003_hw_tx_iq_cal_post_proc(ah);
/* Revert chainmasks to their original values before NF cal */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6eadf97..1e22035 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -652,7 +652,7 @@
.regDmn = { LE16(0), LE16(0x1f) },
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
.opCapFlags = {
- .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+ .opFlags = AR5416_OPFLAGS_11A,
.eepMisc = 0,
},
.rfSilent = 0,
@@ -922,7 +922,7 @@
.db_stage2 = {3, 3, 3}, /* 3 chain */
.db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
.db_stage4 = {3, 3, 3}, /* don't exist for 2G */
- .xpaBiasLvl = 0,
+ .xpaBiasLvl = 0xf,
.txFrameToDataStart = 0x0e,
.txFrameToPaOn = 0x0e,
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
@@ -3217,7 +3217,6 @@
u8 *word, int length, int mdata_size)
{
struct ath_common *common = ath9k_hw_common(ah);
- u8 *dptr;
const struct ar9300_eeprom *eep = NULL;
switch (code) {
@@ -3235,7 +3234,6 @@
break;
case _CompressBlock:
if (reference == 0) {
- dptr = mptr;
} else {
eep = ar9003_eeprom_struct_find_by_id(reference);
if (eep == NULL) {
@@ -3444,13 +3442,15 @@
{
int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz);
- if (AR_SREV_9485(ah))
+ if (AR_SREV_9485(ah) || AR_SREV_9340(ah))
REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias);
else {
REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
- REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_XPABIASLVL_MSB,
- bias >> 2);
- REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_XPASHORT2GND, 1);
+ REG_RMW_FIELD(ah, AR_CH0_THERM,
+ AR_CH0_THERM_XPABIASLVL_MSB,
+ bias >> 2);
+ REG_RMW_FIELD(ah, AR_CH0_THERM,
+ AR_CH0_THERM_XPASHORT2GND, 1);
}
}
@@ -3497,34 +3497,77 @@
static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
{
+ int chain;
+ u32 regval;
+ u32 ant_div_ctl1;
+ static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
+ AR_PHY_SWITCH_CHAIN_0,
+ AR_PHY_SWITCH_CHAIN_1,
+ AR_PHY_SWITCH_CHAIN_2,
+ };
+
u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, AR_SWITCH_TABLE_COM_ALL, value);
value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz);
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value);
- value = ar9003_hw_ant_ctrl_chain_get(ah, 0, is2ghz);
- REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_0, AR_SWITCH_TABLE_ALL, value);
-
- if (!AR_SREV_9485(ah)) {
- value = ar9003_hw_ant_ctrl_chain_get(ah, 1, is2ghz);
- REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL,
- value);
-
- value = ar9003_hw_ant_ctrl_chain_get(ah, 2, is2ghz);
- REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL,
- value);
+ for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+ if ((ah->rxchainmask & BIT(chain)) ||
+ (ah->txchainmask & BIT(chain))) {
+ value = ar9003_hw_ant_ctrl_chain_get(ah, chain,
+ is2ghz);
+ REG_RMW_FIELD(ah, switch_chain_reg[chain],
+ AR_SWITCH_TABLE_ALL, value);
+ }
}
if (AR_SREV_9485(ah)) {
value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1);
- REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_CTRL_ALL,
- value);
- REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_ENABLE,
- value >> 6);
- REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT, AR_FAST_DIV_ENABLE,
- value >> 7);
+ /*
+ * main_lnaconf, alt_lnaconf, main_tb, alt_tb
+ * are the fields present
+ */
+ regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+ regval &= (~AR_ANT_DIV_CTRL_ALL);
+ regval |= (value & 0x3f) << AR_ANT_DIV_CTRL_ALL_S;
+ /* enable_lnadiv */
+ regval &= (~AR_PHY_9485_ANT_DIV_LNADIV);
+ regval |= ((value >> 6) & 0x1) <<
+ AR_PHY_9485_ANT_DIV_LNADIV_S;
+ REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
+
+ /*enable fast_div */
+ regval = REG_READ(ah, AR_PHY_CCK_DETECT);
+ regval &= (~AR_FAST_DIV_ENABLE);
+ regval |= ((value >> 7) & 0x1) <<
+ AR_FAST_DIV_ENABLE_S;
+ REG_WRITE(ah, AR_PHY_CCK_DETECT, regval);
+ ant_div_ctl1 =
+ ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
+ /* check whether antenna diversity is enabled */
+ if ((ant_div_ctl1 >> 0x6) == 0x3) {
+ regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+ /*
+ * clear bits 25-30 main_lnaconf, alt_lnaconf,
+ * main_tb, alt_tb
+ */
+ regval &= (~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
+ AR_PHY_9485_ANT_DIV_ALT_LNACONF |
+ AR_PHY_9485_ANT_DIV_ALT_GAINTB |
+ AR_PHY_9485_ANT_DIV_MAIN_GAINTB));
+ /* by default use LNA1 for the main antenna */
+ regval |= (AR_PHY_9485_ANT_DIV_LNA1 <<
+ AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S);
+ regval |= (AR_PHY_9485_ANT_DIV_LNA2 <<
+ AR_PHY_9485_ANT_DIV_ALT_LNACONF_S);
+ REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
+ }
+
+
}
+
}
static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
@@ -3634,13 +3677,16 @@
/* Test value. if 0 then attenuation is unused. Don't load anything. */
for (i = 0; i < 3; i++) {
- value = ar9003_hw_atten_chain_get(ah, i, chan);
- REG_RMW_FIELD(ah, ext_atten_reg[i],
- AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
+ if (ah->txchainmask & BIT(i)) {
+ value = ar9003_hw_atten_chain_get(ah, i, chan);
+ REG_RMW_FIELD(ah, ext_atten_reg[i],
+ AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
- value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
- REG_RMW_FIELD(ah, ext_atten_reg[i],
- AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, value);
+ value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
+ REG_RMW_FIELD(ah, ext_atten_reg[i],
+ AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN,
+ value);
+ }
}
}
@@ -3749,8 +3795,9 @@
ar9003_hw_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan));
ar9003_hw_drive_strength_apply(ah);
ar9003_hw_atten_apply(ah, chan);
- ar9003_hw_internal_regulator_apply(ah);
- if (AR_SREV_9485(ah))
+ if (!AR_SREV_9340(ah))
+ ar9003_hw_internal_regulator_apply(ah);
+ if (AR_SREV_9485(ah) || AR_SREV_9340(ah))
ar9003_hw_apply_tuning_caps(ah);
}
@@ -3994,6 +4041,16 @@
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)
);
+ /* Write the power for duplicated frames - HT40 */
+
+ /* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */
+ REG_WRITE(ah, 0xa3e0,
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)
+ );
+
/* Write the HT20 power per rate set */
/* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 7f5de6e..a55eddb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -18,6 +18,7 @@
#include "ar9003_mac.h"
#include "ar9003_2p2_initvals.h"
#include "ar9485_initvals.h"
+#include "ar9340_initvals.h"
/* General hardware code for the AR9003 hadware family */
@@ -28,7 +29,63 @@
*/
static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
{
- if (AR_SREV_9485_11(ah)) {
+ if (AR_SREV_9340(ah)) {
+ /* mac */
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ ar9340_1p0_mac_core,
+ ARRAY_SIZE(ar9340_1p0_mac_core), 2);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ ar9340_1p0_mac_postamble,
+ ARRAY_SIZE(ar9340_1p0_mac_postamble), 5);
+
+ /* bb */
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ ar9340_1p0_baseband_core,
+ ARRAY_SIZE(ar9340_1p0_baseband_core), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ ar9340_1p0_baseband_postamble,
+ ARRAY_SIZE(ar9340_1p0_baseband_postamble), 5);
+
+ /* radio */
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ ar9340_1p0_radio_core,
+ ARRAY_SIZE(ar9340_1p0_radio_core), 2);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ ar9340_1p0_radio_postamble,
+ ARRAY_SIZE(ar9340_1p0_radio_postamble), 5);
+
+ /* soc */
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ ar9340_1p0_soc_preamble,
+ ARRAY_SIZE(ar9340_1p0_soc_preamble), 2);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+ ar9340_1p0_soc_postamble,
+ ARRAY_SIZE(ar9340_1p0_soc_postamble), 5);
+
+ /* rx/tx gain */
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9340Common_wo_xlna_rx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Common_wo_xlna_rx_gain_table_1p0),
+ 5);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_high_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_high_ob_db_tx_gain_table_1p0),
+ 5);
+
+ INIT_INI_ARRAY(&ah->iniModesAdditional,
+ ar9340Modes_fast_clock_1p0,
+ ARRAY_SIZE(ar9340Modes_fast_clock_1p0),
+ 3);
+
+ INIT_INI_ARRAY(&ah->iniModesAdditional_40M,
+ ar9340_1p0_radio_core_40M,
+ ARRAY_SIZE(ar9340_1p0_radio_core_40M),
+ 2);
+ } else if (AR_SREV_9485_11(ah)) {
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
@@ -66,8 +123,8 @@
/* rx/tx gain */
INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9485_common_rx_gain_1_1,
- ARRAY_SIZE(ar9485_common_rx_gain_1_1), 2);
+ ar9485Common_wo_xlna_rx_gain_1_1,
+ ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1), 2);
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485_modes_lowest_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485_modes_lowest_ob_db_tx_gain_1_1),
@@ -88,66 +145,6 @@
ar9485_1_1_pcie_phy_clkreq_disable_L1,
ARRAY_SIZE(ar9485_1_1_pcie_phy_clkreq_disable_L1),
2);
- } else if (AR_SREV_9485(ah)) {
- /* mac */
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
- ar9485_1_0_mac_core,
- ARRAY_SIZE(ar9485_1_0_mac_core), 2);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
- ar9485_1_0_mac_postamble,
- ARRAY_SIZE(ar9485_1_0_mac_postamble), 5);
-
- /* bb */
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], ar9485_1_0,
- ARRAY_SIZE(ar9485_1_0), 2);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
- ar9485_1_0_baseband_core,
- ARRAY_SIZE(ar9485_1_0_baseband_core), 2);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
- ar9485_1_0_baseband_postamble,
- ARRAY_SIZE(ar9485_1_0_baseband_postamble), 5);
-
- /* radio */
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
- ar9485_1_0_radio_core,
- ARRAY_SIZE(ar9485_1_0_radio_core), 2);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
- ar9485_1_0_radio_postamble,
- ARRAY_SIZE(ar9485_1_0_radio_postamble), 2);
-
- /* soc */
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
- ar9485_1_0_soc_preamble,
- ARRAY_SIZE(ar9485_1_0_soc_preamble), 2);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], NULL, 0, 0);
-
- /* rx/tx gain */
- INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9485Common_rx_gain_1_0,
- ARRAY_SIZE(ar9485Common_rx_gain_1_0), 2);
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9485Modes_lowest_ob_db_tx_gain_1_0,
- ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
- 5);
-
- /* Load PCIE SERDES settings from INI */
-
- /* Awake Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1,
- ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1),
- 2);
-
- /* Sleep Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
- ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1,
- ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1),
- 2);
} else {
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
@@ -223,16 +220,16 @@
switch (ar9003_hw_get_tx_gain_idx(ah)) {
case 0:
default:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485_modes_lowest_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485_modes_lowest_ob_db_tx_gain_1_1),
5);
- else if (AR_SREV_9485(ah))
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9485Modes_lowest_ob_db_tx_gain_1_0,
- ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
- 5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
@@ -240,16 +237,16 @@
5);
break;
case 1:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_high_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485Modes_high_ob_db_tx_gain_1_1),
5);
- else if (AR_SREV_9485(ah))
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9485Modes_high_ob_db_tx_gain_1_0,
- ARRAY_SIZE(ar9485Modes_high_ob_db_tx_gain_1_0),
- 5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_high_ob_db_tx_gain_table_2p2,
@@ -257,16 +254,16 @@
5);
break;
case 2:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_low_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485Modes_low_ob_db_tx_gain_1_1),
5);
- else if (AR_SREV_9485(ah))
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9485Modes_low_ob_db_tx_gain_1_0,
- ARRAY_SIZE(ar9485Modes_low_ob_db_tx_gain_1_0),
- 5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_low_ob_db_tx_gain_table_2p2,
@@ -274,16 +271,16 @@
5);
break;
case 3:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_high_power_tx_gain_1_1,
ARRAY_SIZE(ar9485Modes_high_power_tx_gain_1_1),
5);
- else if (AR_SREV_9485(ah))
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9485Modes_high_power_tx_gain_1_0,
- ARRAY_SIZE(ar9485Modes_high_power_tx_gain_1_0),
- 5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_high_power_tx_gain_table_2p2,
@@ -298,15 +295,15 @@
switch (ar9003_hw_get_rx_gain_idx(ah)) {
case 0:
default:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9485_common_rx_gain_1_1,
- ARRAY_SIZE(ar9485_common_rx_gain_1_1),
+ ar9340Common_rx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Common_rx_gain_table_1p0),
2);
- else if (AR_SREV_9485(ah))
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9485Common_rx_gain_1_0,
- ARRAY_SIZE(ar9485Common_rx_gain_1_0),
+ ar9485Common_wo_xlna_rx_gain_1_1,
+ ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1),
2);
else
INIT_INI_ARRAY(&ah->iniModesRxGain,
@@ -315,16 +312,16 @@
2);
break;
case 1:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9340Common_wo_xlna_rx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Common_wo_xlna_rx_gain_table_1p0),
+ 2);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9485Common_wo_xlna_rx_gain_1_1,
ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1),
2);
- else if (AR_SREV_9485(ah))
- INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9485Common_wo_xlna_rx_gain_1_0,
- ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_0),
- 2);
else
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_wo_xlna_rx_gain_table_2p2,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 038a0cb..be6adec 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -329,7 +329,6 @@
| (flags & ATH9K_TXDESC_VMF ? AR_VirtMoreFrag : 0)
| SM(txpower, AR_XmitPower)
| (flags & ATH9K_TXDESC_VEOL ? AR_VEOL : 0)
- | (flags & ATH9K_TXDESC_CLRDMASK ? AR_ClrDestMask : 0)
| (keyIx != ATH9K_TXKEYIX_INVALID ? AR_DestIdxValid : 0)
| (flags & ATH9K_TXDESC_LOWRXCHAIN ? AR_LowRxChain : 0);
@@ -350,6 +349,16 @@
ads->ctl22 = 0;
}
+static void ar9003_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val)
+{
+ struct ar9003_txc *ads = (struct ar9003_txc *) ds;
+
+ if (val)
+ ads->ctl11 |= AR_ClrDestMask;
+ else
+ ads->ctl11 &= ~AR_ClrDestMask;
+}
+
static void ar9003_hw_set11n_ratescenario(struct ath_hw *ah, void *ds,
void *lastds,
u32 durUpdateEn, u32 rtsctsRate,
@@ -475,27 +484,6 @@
ads->ctl12 &= (~AR_IsAggr & ~AR_MoreAggr);
}
-static void ar9003_hw_set11n_burstduration(struct ath_hw *ah, void *ds,
- u32 burstDuration)
-{
- struct ar9003_txc *ads = (struct ar9003_txc *) ds;
-
- ads->ctl13 &= ~AR_BurstDur;
- ads->ctl13 |= SM(burstDuration, AR_BurstDur);
-
-}
-
-static void ar9003_hw_set11n_virtualmorefrag(struct ath_hw *ah, void *ds,
- u32 vmf)
-{
- struct ar9003_txc *ads = (struct ar9003_txc *) ds;
-
- if (vmf)
- ads->ctl11 |= AR_VirtMoreFrag;
- else
- ads->ctl11 &= ~AR_VirtMoreFrag;
-}
-
void ar9003_hw_set_paprd_txdesc(struct ath_hw *ah, void *ds, u8 chains)
{
struct ar9003_txc *ads = ds;
@@ -520,8 +508,7 @@
ops->set11n_aggr_middle = ar9003_hw_set11n_aggr_middle;
ops->set11n_aggr_last = ar9003_hw_set11n_aggr_last;
ops->clr11n_aggr = ar9003_hw_clr11n_aggr;
- ops->set11n_burstduration = ar9003_hw_set11n_burstduration;
- ops->set11n_virtualmorefrag = ar9003_hw_set11n_virtualmorefrag;
+ ops->set_clrdmask = ar9003_hw_set_clrdmask;
}
void ath9k_hw_set_rx_bufsize(struct ath_hw *ah, u16 buf_size)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index eb250d6..25f3c2f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -75,16 +75,42 @@
freq = centers.synth_center;
if (freq < 4800) { /* 2 GHz, fractional mode */
- if (AR_SREV_9485(ah))
- channelSel = CHANSEL_2G_9485(freq);
- else
+ if (AR_SREV_9485(ah)) {
+ u32 chan_frac;
+
+ /*
+ * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
+ * ndiv = ((chan_mhz * 4) / 3) / freq_ref;
+ * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
+ */
+ channelSel = (freq * 4) / 120;
+ chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else if (AR_SREV_9340(ah)) {
+ if (ah->is_clk_25mhz) {
+ u32 chan_frac;
+
+ channelSel = (freq * 2) / 75;
+ chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else
+ channelSel = CHANSEL_2G(freq) >> 1;
+ } else
channelSel = CHANSEL_2G(freq);
/* Set to 2G mode */
bMode = 1;
} else {
- channelSel = CHANSEL_5G(freq);
- /* Doubler is ON, so, divide channelSel by 2. */
- channelSel >>= 1;
+ if (AR_SREV_9340(ah) && ah->is_clk_25mhz) {
+ u32 chan_frac;
+
+ channelSel = (freq * 2) / 75;
+ chan_frac = ((freq % 75) * 0x20000) / 75;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else {
+ channelSel = CHANSEL_5G(freq);
+ /* Doubler is ON, so, divide channelSel by 2. */
+ channelSel >>= 1;
+ }
/* Set to 5G mode */
bMode = 0;
}
@@ -142,7 +168,7 @@
* is out-of-band and can be ignored.
*/
- if (AR_SREV_9485(ah)) {
+ if (AR_SREV_9485(ah) || AR_SREV_9340(ah)) {
spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah,
IS_CHAN_2GHZ(chan));
if (spur_fbin_ptr[0] == 0) /* No spur */
@@ -167,7 +193,7 @@
for (i = 0; i < max_spur_cnts; i++) {
negative = 0;
- if (AR_SREV_9485(ah))
+ if (AR_SREV_9485(ah) || AR_SREV_9340(ah))
cur_bb_spur = FBIN2FREQ(spur_fbin_ptr[i],
IS_CHAN_2GHZ(chan)) - synth_freq;
else
@@ -401,7 +427,7 @@
ar9003_hw_spur_ofdm_clear(ah);
- for (i = 0; spurChansPtr[i] && i < 5; i++) {
+ for (i = 0; i < AR_EEPROM_MODAL_SPURS && spurChansPtr[i]; i++) {
freq_offset = FBIN2FREQ(spurChansPtr[i], mode) - synth_freq;
if (abs(freq_offset) < range) {
ar9003_hw_spur_ofdm_work(ah, chan, freq_offset);
@@ -590,29 +616,25 @@
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
unsigned int regWrites = 0, i;
struct ieee80211_channel *channel = chan->chan;
- u32 modesIndex, freqIndex;
+ u32 modesIndex;
switch (chan->chanmode) {
case CHANNEL_A:
case CHANNEL_A_HT20:
modesIndex = 1;
- freqIndex = 1;
break;
case CHANNEL_A_HT40PLUS:
case CHANNEL_A_HT40MINUS:
modesIndex = 2;
- freqIndex = 1;
break;
case CHANNEL_G:
case CHANNEL_G_HT20:
case CHANNEL_B:
modesIndex = 4;
- freqIndex = 2;
break;
case CHANNEL_G_HT40PLUS:
case CHANNEL_G_HT40MINUS:
modesIndex = 3;
- freqIndex = 2;
break;
default:
@@ -637,6 +659,9 @@
REG_WRITE_ARRAY(&ah->iniModesAdditional,
modesIndex, regWrites);
+ if (AR_SREV_9340(ah) && !ah->is_clk_25mhz)
+ REG_WRITE_ARRAY(&ah->iniModesAdditional_40M, 1, regWrites);
+
ar9003_hw_override_ini(ah);
ar9003_hw_set_channel_regs(ah, chan);
ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
@@ -1159,9 +1184,52 @@
conf->radar_inband = 8;
}
+static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+ struct ath_hw_antcomb_conf *antconf)
+{
+ u32 regval;
+
+ regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+ antconf->main_lna_conf = (regval & AR_PHY_9485_ANT_DIV_MAIN_LNACONF) >>
+ AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S;
+ antconf->alt_lna_conf = (regval & AR_PHY_9485_ANT_DIV_ALT_LNACONF) >>
+ AR_PHY_9485_ANT_DIV_ALT_LNACONF_S;
+ antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >>
+ AR_PHY_9485_ANT_FAST_DIV_BIAS_S;
+ antconf->lna1_lna2_delta = -9;
+ antconf->div_group = 2;
+}
+
+static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+ struct ath_hw_antcomb_conf *antconf)
+{
+ u32 regval;
+
+ regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
+ regval &= ~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
+ AR_PHY_9485_ANT_DIV_ALT_LNACONF |
+ AR_PHY_9485_ANT_FAST_DIV_BIAS |
+ AR_PHY_9485_ANT_DIV_MAIN_GAINTB |
+ AR_PHY_9485_ANT_DIV_ALT_GAINTB);
+ regval |= ((antconf->main_lna_conf <<
+ AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S)
+ & AR_PHY_9485_ANT_DIV_MAIN_LNACONF);
+ regval |= ((antconf->alt_lna_conf << AR_PHY_9485_ANT_DIV_ALT_LNACONF_S)
+ & AR_PHY_9485_ANT_DIV_ALT_LNACONF);
+ regval |= ((antconf->fast_div_bias << AR_PHY_9485_ANT_FAST_DIV_BIAS_S)
+ & AR_PHY_9485_ANT_FAST_DIV_BIAS);
+ regval |= ((antconf->main_gaintb << AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S)
+ & AR_PHY_9485_ANT_DIV_MAIN_GAINTB);
+ regval |= ((antconf->alt_gaintb << AR_PHY_9485_ANT_DIV_ALT_GAINTB_S)
+ & AR_PHY_9485_ANT_DIV_ALT_GAINTB);
+
+ REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
+}
+
void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+ struct ath_hw_ops *ops = ath9k_hw_ops(ah);
static const u32 ar9300_cca_regs[6] = {
AR_PHY_CCA_0,
AR_PHY_CCA_1,
@@ -1188,6 +1256,9 @@
priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs;
priv_ops->set_radar_params = ar9003_hw_set_radar_params;
+ ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get;
+ ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set;
+
ar9003_hw_set_nf_limits(ah);
ar9003_hw_set_radar_conf(ah);
memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs));
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 8bdda2c..c7505b4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -261,12 +261,34 @@
#define AR_PHY_EXT_CCA0 (AR_AGC_BASE + 0x20)
#define AR_PHY_RESTART (AR_AGC_BASE + 0x24)
+/*
+ * Antenna Diversity settings
+ */
#define AR_PHY_MC_GAIN_CTRL (AR_AGC_BASE + 0x28)
#define AR_ANT_DIV_CTRL_ALL 0x7e000000
#define AR_ANT_DIV_CTRL_ALL_S 25
#define AR_ANT_DIV_ENABLE 0x1000000
#define AR_ANT_DIV_ENABLE_S 24
+
+#define AR_PHY_9485_ANT_FAST_DIV_BIAS 0x00007e00
+#define AR_PHY_9485_ANT_FAST_DIV_BIAS_S 9
+#define AR_PHY_9485_ANT_DIV_LNADIV 0x01000000
+#define AR_PHY_9485_ANT_DIV_LNADIV_S 24
+#define AR_PHY_9485_ANT_DIV_ALT_LNACONF 0x06000000
+#define AR_PHY_9485_ANT_DIV_ALT_LNACONF_S 25
+#define AR_PHY_9485_ANT_DIV_MAIN_LNACONF 0x18000000
+#define AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S 27
+#define AR_PHY_9485_ANT_DIV_ALT_GAINTB 0x20000000
+#define AR_PHY_9485_ANT_DIV_ALT_GAINTB_S 29
+#define AR_PHY_9485_ANT_DIV_MAIN_GAINTB 0x40000000
+#define AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S 30
+
+#define AR_PHY_9485_ANT_DIV_LNA1_MINUS_LNA2 0x0
+#define AR_PHY_9485_ANT_DIV_LNA2 0x1
+#define AR_PHY_9485_ANT_DIV_LNA1 0x2
+#define AR_PHY_9485_ANT_DIV_LNA1_PLUS_LNA2 0x3
+
#define AR_PHY_EXTCHN_PWRTHR1 (AR_AGC_BASE + 0x2c)
#define AR_PHY_EXT_CHN_WIN (AR_AGC_BASE + 0x30)
#define AR_PHY_20_40_DET_THR (AR_AGC_BASE + 0x34)
@@ -548,15 +570,12 @@
#define AR_PHY_TXGAIN_TABLE (AR_SM_BASE + 0x300)
-#define AR_PHY_TX_IQCAL_START_9485 (AR_SM_BASE + 0x3c4)
-#define AR_PHY_TX_IQCAL_START_DO_CAL_9485 0x80000000
-#define AR_PHY_TX_IQCAL_START_DO_CAL_9485_S 31
-#define AR_PHY_TX_IQCAL_CONTROL_1_9485 (AR_SM_BASE + 0x3c8)
-#define AR_PHY_TX_IQCAL_STATUS_B0_9485 (AR_SM_BASE + 0x3f0)
-
-#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + 0x448)
-#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + 0x440)
-#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + 0x48c)
+#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + AR_SREV_9485(ah) ? \
+ 0x3c8 : 0x448)
+#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + AR_SREV_9485(ah) ? \
+ 0x3c4 : 0x440)
+#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + AR_SREV_9485(ah) ? \
+ 0x3f0 : 0x48c)
#define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i) (AR_SM_BASE + \
(AR_SREV_9485(ah) ? \
0x3d0 : 0x450) + ((_i) << 2))
@@ -588,7 +607,7 @@
#define AR_PHY_65NM_CH0_BIAS2 0x160c4
#define AR_PHY_65NM_CH0_BIAS4 0x160cc
#define AR_PHY_65NM_CH0_RXTX4 0x1610c
-#define AR_PHY_65NM_CH0_THERM (AR_SREV_9485(ah) ? 0x1628c : 0x16290)
+#define AR_PHY_65NM_CH0_THERM (AR_SREV_9300(ah) ? 0x16290 : 0x1628c)
#define AR_PHY_65NM_CH0_THERM_LOCAL 0x80000000
#define AR_PHY_65NM_CH0_THERM_LOCAL_S 31
@@ -758,10 +777,10 @@
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x01000000
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 24
#define AR_PHY_CHANNEL_STATUS_RX_CLEAR 0x00000004
-#define AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT 0x01fc0000
-#define AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT_S 18
-#define AR_PHY_TX_IQCAL_START_DO_CAL 0x00000001
-#define AR_PHY_TX_IQCAL_START_DO_CAL_S 0
+#define AR_PHY_TX_IQCAL_CONTROL_1_IQCORR_I_Q_COFF_DELPT 0x01fc0000
+#define AR_PHY_TX_IQCAL_CONTROL_1_IQCORR_I_Q_COFF_DELPT_S 18
+#define AR_PHY_TX_IQCAL_START_DO_CAL 0x00000001
+#define AR_PHY_TX_IQCAL_START_DO_CAL_S 0
#define AR_PHY_TX_IQCAL_STATUS_FAILED 0x00000001
#define AR_PHY_CALIBRATED_GAINS_0 0x3e
diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
new file mode 100644
index 0000000..815a8af
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -0,0 +1,1525 @@
+/*
+ * Copyright (c) 2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef INITVALS_9340_H
+#define INITVALS_9340_H
+
+static const u32 ar9340_1p0_radio_postamble[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x000160ac, 0xa4646800, 0xa4646800, 0xa4646800, 0xa4646800},
+ {0x0001610c, 0x08000000, 0x08000000, 0x00000000, 0x00000000},
+ {0x00016140, 0x10804000, 0x10804000, 0x50804000, 0x50804000},
+ {0x0001650c, 0x08000000, 0x08000000, 0x00000000, 0x00000000},
+ {0x00016540, 0x10804000, 0x10804000, 0x50804000, 0x50804000},
+};
+
+static const u32 ar9340Modes_lowest_ob_db_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
+ {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
+ {0x0000a518, 0x21020220, 0x21020220, 0x16000402, 0x16000402},
+ {0x0000a51c, 0x27020223, 0x27020223, 0x19000404, 0x19000404},
+ {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
+ {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
+ {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
+ {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
+ {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
+ {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
+ {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
+ {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
+ {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
+ {0x0000a544, 0x5302266c, 0x5302266c, 0x3f001861, 0x3f001861},
+ {0x0000a548, 0x5702286c, 0x5702286c, 0x43001a81, 0x43001a81},
+ {0x0000a54c, 0x5c04286b, 0x5c04286b, 0x47001a83, 0x47001a83},
+ {0x0000a550, 0x61042a6c, 0x61042a6c, 0x4a001c84, 0x4a001c84},
+ {0x0000a554, 0x66062a6c, 0x66062a6c, 0x4e001ce3, 0x4e001ce3},
+ {0x0000a558, 0x6b062e6c, 0x6b062e6c, 0x52001ce5, 0x52001ce5},
+ {0x0000a55c, 0x7006308c, 0x7006308c, 0x56001ce9, 0x56001ce9},
+ {0x0000a560, 0x730a308a, 0x730a308a, 0x5a001ceb, 0x5a001ceb},
+ {0x0000a564, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a568, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a56c, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a570, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a574, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a578, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a57c, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
+ {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
+ {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
+ {0x0000a598, 0x21820220, 0x21820220, 0x16800402, 0x16800402},
+ {0x0000a59c, 0x27820223, 0x27820223, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
+ {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
+ {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
+ {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
+ {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
+ {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
+ {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
+ {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
+ {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
+ {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3f801861, 0x3f801861},
+ {0x0000a5c8, 0x5782286c, 0x5782286c, 0x43801a81, 0x43801a81},
+ {0x0000a5cc, 0x5c84286b, 0x5c84286b, 0x47801a83, 0x47801a83},
+ {0x0000a5d0, 0x61842a6c, 0x61842a6c, 0x4a801c84, 0x4a801c84},
+ {0x0000a5d4, 0x66862a6c, 0x66862a6c, 0x4e801ce3, 0x4e801ce3},
+ {0x0000a5d8, 0x6b862e6c, 0x6b862e6c, 0x52801ce5, 0x52801ce5},
+ {0x0000a5dc, 0x7086308c, 0x7086308c, 0x56801ce9, 0x56801ce9},
+ {0x0000a5e0, 0x738a308a, 0x738a308a, 0x5a801ceb, 0x5a801ceb},
+ {0x0000a5e4, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5e8, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5ec, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f0, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f4, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f8, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5fc, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x00016044, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+ {0x00016048, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+ {0x00016444, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+ {0x00016448, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+};
+
+static const u32 ar9340Modes_fast_clock_1p0[][3] = {
+ /* Addr 5G_HT20 5G_HT40 */
+ {0x00001030, 0x00000268, 0x000004d0},
+ {0x00001070, 0x0000018c, 0x00000318},
+ {0x000010b0, 0x00000fd0, 0x00001fa0},
+ {0x00008014, 0x044c044c, 0x08980898},
+ {0x0000801c, 0x148ec02b, 0x148ec057},
+ {0x00008318, 0x000044c0, 0x00008980},
+ {0x00009e00, 0x03721821, 0x03721821},
+ {0x0000a230, 0x0000000b, 0x00000016},
+ {0x0000a254, 0x00000898, 0x00001130},
+};
+
+static const u32 ar9340_1p0_radio_core[][2] = {
+ /* Addr allmodes */
+ {0x00016000, 0x36db6db6},
+ {0x00016004, 0x6db6db40},
+ {0x00016008, 0x73f00000},
+ {0x0001600c, 0x00000000},
+ {0x00016040, 0x7f80fff8},
+ {0x00016044, 0x03b6d2db},
+ {0x00016048, 0x24925266},
+ {0x0001604c, 0x000f0278},
+ {0x00016050, 0x6db6db6c},
+ {0x00016054, 0x6db60000},
+ {0x00016080, 0x00080000},
+ {0x00016084, 0x0e48048c},
+ {0x00016088, 0x14214514},
+ {0x0001608c, 0x119f081c},
+ {0x00016090, 0x24926490},
+ {0x00016094, 0x00000000},
+ {0x00016098, 0xd411eb84},
+ {0x0001609c, 0x03e47f32},
+ {0x000160a0, 0xc2108ffe},
+ {0x000160a4, 0x812fc370},
+ {0x000160a8, 0x423c8000},
+ {0x000160ac, 0xa4646800},
+ {0x000160b0, 0x00fe7f46},
+ {0x000160b4, 0x92480000},
+ {0x000160c0, 0x006db6db},
+ {0x000160c4, 0x6db6db60},
+ {0x000160c8, 0x6db6db6c},
+ {0x000160cc, 0x6de6db6c},
+ {0x000160d0, 0xb6da4924},
+ {0x00016100, 0x04cb0001},
+ {0x00016104, 0xfff80000},
+ {0x00016108, 0x00080010},
+ {0x0001610c, 0x00000000},
+ {0x00016140, 0x50804008},
+ {0x00016144, 0x01884080},
+ {0x00016148, 0x000080c0},
+ {0x00016280, 0x01000015},
+ {0x00016284, 0x05530000},
+ {0x00016288, 0x00318000},
+ {0x0001628c, 0x50000000},
+ {0x00016290, 0x4080294f},
+ {0x00016380, 0x00000000},
+ {0x00016384, 0x00000000},
+ {0x00016388, 0x00800700},
+ {0x0001638c, 0x00800700},
+ {0x00016390, 0x00800700},
+ {0x00016394, 0x00000000},
+ {0x00016398, 0x00000000},
+ {0x0001639c, 0x00000000},
+ {0x000163a0, 0x00000001},
+ {0x000163a4, 0x00000001},
+ {0x000163a8, 0x00000000},
+ {0x000163ac, 0x00000000},
+ {0x000163b0, 0x00000000},
+ {0x000163b4, 0x00000000},
+ {0x000163b8, 0x00000000},
+ {0x000163bc, 0x00000000},
+ {0x000163c0, 0x000000a0},
+ {0x000163c4, 0x000c0000},
+ {0x000163c8, 0x14021402},
+ {0x000163cc, 0x00001402},
+ {0x000163d0, 0x00000000},
+ {0x000163d4, 0x00000000},
+ {0x00016400, 0x36db6db6},
+ {0x00016404, 0x6db6db40},
+ {0x00016408, 0x73f00000},
+ {0x0001640c, 0x00000000},
+ {0x00016440, 0x7f80fff8},
+ {0x00016444, 0x03b6d2db},
+ {0x00016448, 0x24927266},
+ {0x0001644c, 0x000f0278},
+ {0x00016450, 0x6db6db6c},
+ {0x00016454, 0x6db60000},
+ {0x00016500, 0x04cb0001},
+ {0x00016504, 0xfff80000},
+ {0x00016508, 0x00080010},
+ {0x0001650c, 0x00000000},
+ {0x00016540, 0x50804008},
+ {0x00016544, 0x01884080},
+ {0x00016548, 0x000080c0},
+ {0x00016780, 0x00000000},
+ {0x00016784, 0x00000000},
+ {0x00016788, 0x00800700},
+ {0x0001678c, 0x00800700},
+ {0x00016790, 0x00800700},
+ {0x00016794, 0x00000000},
+ {0x00016798, 0x00000000},
+ {0x0001679c, 0x00000000},
+ {0x000167a0, 0x00000001},
+ {0x000167a4, 0x00000001},
+ {0x000167a8, 0x00000000},
+ {0x000167ac, 0x00000000},
+ {0x000167b0, 0x00000000},
+ {0x000167b4, 0x00000000},
+ {0x000167b8, 0x00000000},
+ {0x000167bc, 0x00000000},
+ {0x000167c0, 0x000000a0},
+ {0x000167c4, 0x000c0000},
+ {0x000167c8, 0x14021402},
+ {0x000167cc, 0x00001402},
+ {0x000167d0, 0x00000000},
+ {0x000167d4, 0x00000000},
+};
+
+static const u32 ar9340_1p0_radio_core_40M[][2] = {
+ {0x0001609c, 0x02566f3a},
+ {0x000160ac, 0xa4647c00},
+ {0x000160b0, 0x01885f5a},
+};
+
+static const u32 ar9340_1p0_mac_postamble[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
+ {0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
+ {0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
+ {0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
+ {0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
+ {0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
+ {0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
+ {0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
+};
+
+static const u32 ar9340_1p0_soc_postamble[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x00007010, 0x00000023, 0x00000023, 0x00000023, 0x00000023},
+};
+
+static const u32 ar9340_1p0_baseband_postamble[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8011, 0xd00a8011},
+ {0x00009820, 0x206a022e, 0x206a022e, 0x206a022e, 0x206a022e},
+ {0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
+ {0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
+ {0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
+ {0x00009830, 0x0000059c, 0x0000059c, 0x0000119c, 0x0000119c},
+ {0x00009c00, 0x00000044, 0x000000c4, 0x000000c4, 0x00000044},
+ {0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
+ {0x00009e04, 0x00182020, 0x00182020, 0x00182020, 0x00182020},
+ {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
+ {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e},
+ {0x00009e14, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e},
+ {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
+ {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
+ {0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
+ {0x00009e44, 0x02321e27, 0x02321e27, 0x02291e27, 0x02291e27},
+ {0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
+ {0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
+ {0x0000a204, 0x00003fc0, 0x00003fc4, 0x00003fc4, 0x00003fc0},
+ {0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
+ {0x0000a230, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b},
+ {0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
+ {0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108},
+ {0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898},
+ {0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002},
+ {0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e},
+ {0x0000a260, 0x0a021501, 0x0a021501, 0x3a021501, 0x3a021501},
+ {0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e},
+ {0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b},
+ {0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
+ {0x0000a288, 0x00000220, 0x00000220, 0x00000110, 0x00000110},
+ {0x0000a28c, 0x00011111, 0x00011111, 0x00022222, 0x00022222},
+ {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2d0, 0x00071981, 0x00071981, 0x00071981, 0x00071982},
+ {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
+ {0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a830, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c},
+ {0x0000ae04, 0x00180000, 0x00180000, 0x00180000, 0x00180000},
+ {0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000ae1c, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c},
+ {0x0000ae20, 0x000001b5, 0x000001b5, 0x000001ce, 0x000001ce},
+ {0x0000b284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
+};
+
+static const u32 ar9340_1p0_baseband_core[][2] = {
+ /* Addr allmodes */
+ {0x00009800, 0xafe68e30},
+ {0x00009804, 0xfd14e000},
+ {0x00009808, 0x9c0a9f6b},
+ {0x0000980c, 0x04900000},
+ {0x00009814, 0xb280c00a},
+ {0x00009818, 0x00000000},
+ {0x0000981c, 0x00020028},
+ {0x00009834, 0x5f3ca3de},
+ {0x00009838, 0x0108ecff},
+ {0x0000983c, 0x14750600},
+ {0x00009880, 0x201fff00},
+ {0x00009884, 0x00001042},
+ {0x000098a4, 0x00200400},
+ {0x000098b0, 0x52440bbe},
+ {0x000098d0, 0x004b6a8e},
+ {0x000098d4, 0x00000820},
+ {0x000098dc, 0x00000000},
+ {0x000098f0, 0x00000000},
+ {0x000098f4, 0x00000000},
+ {0x00009c04, 0xff55ff55},
+ {0x00009c08, 0x0320ff55},
+ {0x00009c0c, 0x00000000},
+ {0x00009c10, 0x00000000},
+ {0x00009c14, 0x00046384},
+ {0x00009c18, 0x05b6b440},
+ {0x00009c1c, 0x00b6b440},
+ {0x00009d00, 0xc080a333},
+ {0x00009d04, 0x40206c10},
+ {0x00009d08, 0x009c4060},
+ {0x00009d0c, 0x9883800a},
+ {0x00009d10, 0x01834061},
+ {0x00009d14, 0x00c0040b},
+ {0x00009d18, 0x00000000},
+ {0x00009e08, 0x0038230c},
+ {0x00009e24, 0x990bb515},
+ {0x00009e28, 0x0c6f0000},
+ {0x00009e30, 0x06336f77},
+ {0x00009e34, 0x6af6532f},
+ {0x00009e38, 0x0cc80c00},
+ {0x00009e3c, 0xcf946222},
+ {0x00009e40, 0x0d261820},
+ {0x00009e4c, 0x00001004},
+ {0x00009e50, 0x00ff03f1},
+ {0x00009e54, 0x00000000},
+ {0x00009fc0, 0x803e4788},
+ {0x00009fc4, 0x0001efb5},
+ {0x00009fcc, 0x40000014},
+ {0x00009fd0, 0x01193b93},
+ {0x0000a20c, 0x00000000},
+ {0x0000a220, 0x00000000},
+ {0x0000a224, 0x00000000},
+ {0x0000a228, 0x10002310},
+ {0x0000a22c, 0x01036a1e},
+ {0x0000a234, 0x10000fff},
+ {0x0000a23c, 0x00000000},
+ {0x0000a244, 0x0c000000},
+ {0x0000a2a0, 0x00000001},
+ {0x0000a2c0, 0x00000001},
+ {0x0000a2c8, 0x00000000},
+ {0x0000a2cc, 0x18c43433},
+ {0x0000a2d4, 0x00000000},
+ {0x0000a2dc, 0x00000000},
+ {0x0000a2e0, 0x00000000},
+ {0x0000a2e4, 0x00000000},
+ {0x0000a2e8, 0x00000000},
+ {0x0000a2ec, 0x00000000},
+ {0x0000a2f0, 0x00000000},
+ {0x0000a2f4, 0x00000000},
+ {0x0000a2f8, 0x00000000},
+ {0x0000a344, 0x00000000},
+ {0x0000a34c, 0x00000000},
+ {0x0000a350, 0x0000a000},
+ {0x0000a364, 0x00000000},
+ {0x0000a370, 0x00000000},
+ {0x0000a390, 0x00000001},
+ {0x0000a394, 0x00000444},
+ {0x0000a398, 0x001f0e0f},
+ {0x0000a39c, 0x0075393f},
+ {0x0000a3a0, 0xb79f6427},
+ {0x0000a3a4, 0x00000000},
+ {0x0000a3a8, 0xaaaaaaaa},
+ {0x0000a3ac, 0x3c466478},
+ {0x0000a3c0, 0x20202020},
+ {0x0000a3c4, 0x22222220},
+ {0x0000a3c8, 0x20200020},
+ {0x0000a3cc, 0x20202020},
+ {0x0000a3d0, 0x20202020},
+ {0x0000a3d4, 0x20202020},
+ {0x0000a3d8, 0x20202020},
+ {0x0000a3dc, 0x20202020},
+ {0x0000a3e0, 0x20202020},
+ {0x0000a3e4, 0x20202020},
+ {0x0000a3e8, 0x20202020},
+ {0x0000a3ec, 0x20202020},
+ {0x0000a3f0, 0x00000000},
+ {0x0000a3f4, 0x00000246},
+ {0x0000a3f8, 0x0cdbd380},
+ {0x0000a3fc, 0x000f0f01},
+ {0x0000a400, 0x8fa91f01},
+ {0x0000a404, 0x00000000},
+ {0x0000a408, 0x0e79e5c6},
+ {0x0000a40c, 0x00820820},
+ {0x0000a414, 0x1ce739ce},
+ {0x0000a418, 0x2d001dce},
+ {0x0000a41c, 0x1ce739ce},
+ {0x0000a420, 0x000001ce},
+ {0x0000a424, 0x1ce739ce},
+ {0x0000a428, 0x000001ce},
+ {0x0000a42c, 0x1ce739ce},
+ {0x0000a430, 0x1ce739ce},
+ {0x0000a434, 0x00000000},
+ {0x0000a438, 0x00001801},
+ {0x0000a43c, 0x00000000},
+ {0x0000a440, 0x00000000},
+ {0x0000a444, 0x00000000},
+ {0x0000a448, 0x04000080},
+ {0x0000a44c, 0x00000001},
+ {0x0000a450, 0x00010000},
+ {0x0000a458, 0x00000000},
+ {0x0000a600, 0x00000000},
+ {0x0000a604, 0x00000000},
+ {0x0000a608, 0x00000000},
+ {0x0000a60c, 0x00000000},
+ {0x0000a610, 0x00000000},
+ {0x0000a614, 0x00000000},
+ {0x0000a618, 0x00000000},
+ {0x0000a61c, 0x00000000},
+ {0x0000a620, 0x00000000},
+ {0x0000a624, 0x00000000},
+ {0x0000a628, 0x00000000},
+ {0x0000a62c, 0x00000000},
+ {0x0000a630, 0x00000000},
+ {0x0000a634, 0x00000000},
+ {0x0000a638, 0x00000000},
+ {0x0000a63c, 0x00000000},
+ {0x0000a640, 0x00000000},
+ {0x0000a644, 0x3fad9d74},
+ {0x0000a648, 0x0048060a},
+ {0x0000a64c, 0x00000637},
+ {0x0000a670, 0x03020100},
+ {0x0000a674, 0x09080504},
+ {0x0000a678, 0x0d0c0b0a},
+ {0x0000a67c, 0x13121110},
+ {0x0000a680, 0x31301514},
+ {0x0000a684, 0x35343332},
+ {0x0000a688, 0x00000036},
+ {0x0000a690, 0x00000838},
+ {0x0000a7c0, 0x00000000},
+ {0x0000a7c4, 0xfffffffc},
+ {0x0000a7c8, 0x00000000},
+ {0x0000a7cc, 0x00000000},
+ {0x0000a7d0, 0x00000000},
+ {0x0000a7d4, 0x00000004},
+ {0x0000a7dc, 0x00000000},
+ {0x0000a8d0, 0x004b6a8e},
+ {0x0000a8d4, 0x00000820},
+ {0x0000a8dc, 0x00000000},
+ {0x0000a8f0, 0x00000000},
+ {0x0000a8f4, 0x00000000},
+ {0x0000b2d0, 0x00000080},
+ {0x0000b2d4, 0x00000000},
+ {0x0000b2dc, 0x00000000},
+ {0x0000b2e0, 0x00000000},
+ {0x0000b2e4, 0x00000000},
+ {0x0000b2e8, 0x00000000},
+ {0x0000b2ec, 0x00000000},
+ {0x0000b2f0, 0x00000000},
+ {0x0000b2f4, 0x00000000},
+ {0x0000b2f8, 0x00000000},
+ {0x0000b408, 0x0e79e5c0},
+ {0x0000b40c, 0x00820820},
+ {0x0000b420, 0x00000000},
+};
+
+static const u32 ar9340Modes_high_power_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
+ {0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
+ {0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
+ {0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
+ {0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
+ {0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
+ {0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
+ {0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
+ {0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
+ {0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
+ {0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
+ {0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
+ {0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
+ {0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
+ {0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
+ {0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
+ {0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
+ {0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
+ {0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
+ {0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
+ {0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
+ {0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
+ {0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
+ {0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
+ {0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
+ {0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
+ {0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
+ {0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
+ {0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
+ {0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
+ {0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
+ {0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
+ {0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
+ {0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
+ {0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
+ {0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
+ {0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
+ {0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
+ {0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
+ {0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
+ {0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
+ {0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
+ {0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
+ {0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x00016044, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+ {0x00016048, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+ {0x00016444, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+ {0x00016448, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+};
+
+static const u32 ar9340Modes_high_ob_db_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
+ {0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
+ {0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
+ {0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
+ {0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
+ {0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
+ {0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
+ {0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
+ {0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
+ {0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
+ {0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
+ {0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
+ {0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
+ {0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
+ {0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
+ {0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
+ {0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
+ {0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
+ {0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
+ {0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
+ {0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
+ {0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
+ {0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
+ {0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
+ {0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
+ {0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
+ {0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
+ {0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
+ {0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
+ {0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
+ {0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
+ {0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
+ {0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
+ {0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
+ {0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
+ {0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
+ {0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
+ {0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
+ {0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
+ {0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
+ {0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
+ {0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
+ {0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
+ {0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x00016044, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
+ {0x00016048, 0x8e481266, 0x8e481266, 0x8e481266, 0x8e481266},
+ {0x00016444, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
+ {0x00016448, 0x8e481266, 0x8e481266, 0x8e481266, 0x8e481266},
+};
+static const u32 ar9340Modes_ub124_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
+ {0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
+ {0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
+ {0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
+ {0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
+ {0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
+ {0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
+ {0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
+ {0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
+ {0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
+ {0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
+ {0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
+ {0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
+ {0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
+ {0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
+ {0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
+ {0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
+ {0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
+ {0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
+ {0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
+ {0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
+ {0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
+ {0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+ {0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
+ {0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
+ {0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
+ {0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
+ {0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
+ {0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
+ {0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
+ {0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
+ {0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
+ {0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
+ {0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
+ {0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
+ {0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
+ {0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
+ {0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
+ {0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
+ {0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
+ {0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
+ {0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
+ {0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
+ {0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
+ {0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+ {0x00016044, 0x036db2db, 0x036db2db, 0x036db2db, 0x036db2db},
+ {0x00016048, 0x69b65266, 0x69b65266, 0x69b65266, 0x69b65266},
+ {0x00016444, 0x036db2db, 0x036db2db, 0x036db2db, 0x036db2db},
+ {0x00016448, 0x69b65266, 0x69b65266, 0x69b65266, 0x69b65266},
+};
+
+
+static const u32 ar9340Common_rx_gain_table_1p0[][2] = {
+ /* Addr allmodes */
+ {0x0000a000, 0x00010000},
+ {0x0000a004, 0x00030002},
+ {0x0000a008, 0x00050004},
+ {0x0000a00c, 0x00810080},
+ {0x0000a010, 0x00830082},
+ {0x0000a014, 0x01810180},
+ {0x0000a018, 0x01830182},
+ {0x0000a01c, 0x01850184},
+ {0x0000a020, 0x01890188},
+ {0x0000a024, 0x018b018a},
+ {0x0000a028, 0x018d018c},
+ {0x0000a02c, 0x01910190},
+ {0x0000a030, 0x01930192},
+ {0x0000a034, 0x01950194},
+ {0x0000a038, 0x038a0196},
+ {0x0000a03c, 0x038c038b},
+ {0x0000a040, 0x0390038d},
+ {0x0000a044, 0x03920391},
+ {0x0000a048, 0x03940393},
+ {0x0000a04c, 0x03960395},
+ {0x0000a050, 0x00000000},
+ {0x0000a054, 0x00000000},
+ {0x0000a058, 0x00000000},
+ {0x0000a05c, 0x00000000},
+ {0x0000a060, 0x00000000},
+ {0x0000a064, 0x00000000},
+ {0x0000a068, 0x00000000},
+ {0x0000a06c, 0x00000000},
+ {0x0000a070, 0x00000000},
+ {0x0000a074, 0x00000000},
+ {0x0000a078, 0x00000000},
+ {0x0000a07c, 0x00000000},
+ {0x0000a080, 0x22222229},
+ {0x0000a084, 0x1d1d1d1d},
+ {0x0000a088, 0x1d1d1d1d},
+ {0x0000a08c, 0x1d1d1d1d},
+ {0x0000a090, 0x171d1d1d},
+ {0x0000a094, 0x11111717},
+ {0x0000a098, 0x00030311},
+ {0x0000a09c, 0x00000000},
+ {0x0000a0a0, 0x00000000},
+ {0x0000a0a4, 0x00000000},
+ {0x0000a0a8, 0x00000000},
+ {0x0000a0ac, 0x00000000},
+ {0x0000a0b0, 0x00000000},
+ {0x0000a0b4, 0x00000000},
+ {0x0000a0b8, 0x00000000},
+ {0x0000a0bc, 0x00000000},
+ {0x0000a0c0, 0x001f0000},
+ {0x0000a0c4, 0x01000101},
+ {0x0000a0c8, 0x011e011f},
+ {0x0000a0cc, 0x011c011d},
+ {0x0000a0d0, 0x02030204},
+ {0x0000a0d4, 0x02010202},
+ {0x0000a0d8, 0x021f0200},
+ {0x0000a0dc, 0x0302021e},
+ {0x0000a0e0, 0x03000301},
+ {0x0000a0e4, 0x031e031f},
+ {0x0000a0e8, 0x0402031d},
+ {0x0000a0ec, 0x04000401},
+ {0x0000a0f0, 0x041e041f},
+ {0x0000a0f4, 0x0502041d},
+ {0x0000a0f8, 0x05000501},
+ {0x0000a0fc, 0x051e051f},
+ {0x0000a100, 0x06010602},
+ {0x0000a104, 0x061f0600},
+ {0x0000a108, 0x061d061e},
+ {0x0000a10c, 0x07020703},
+ {0x0000a110, 0x07000701},
+ {0x0000a114, 0x00000000},
+ {0x0000a118, 0x00000000},
+ {0x0000a11c, 0x00000000},
+ {0x0000a120, 0x00000000},
+ {0x0000a124, 0x00000000},
+ {0x0000a128, 0x00000000},
+ {0x0000a12c, 0x00000000},
+ {0x0000a130, 0x00000000},
+ {0x0000a134, 0x00000000},
+ {0x0000a138, 0x00000000},
+ {0x0000a13c, 0x00000000},
+ {0x0000a140, 0x001f0000},
+ {0x0000a144, 0x01000101},
+ {0x0000a148, 0x011e011f},
+ {0x0000a14c, 0x011c011d},
+ {0x0000a150, 0x02030204},
+ {0x0000a154, 0x02010202},
+ {0x0000a158, 0x021f0200},
+ {0x0000a15c, 0x0302021e},
+ {0x0000a160, 0x03000301},
+ {0x0000a164, 0x031e031f},
+ {0x0000a168, 0x0402031d},
+ {0x0000a16c, 0x04000401},
+ {0x0000a170, 0x041e041f},
+ {0x0000a174, 0x0502041d},
+ {0x0000a178, 0x05000501},
+ {0x0000a17c, 0x051e051f},
+ {0x0000a180, 0x06010602},
+ {0x0000a184, 0x061f0600},
+ {0x0000a188, 0x061d061e},
+ {0x0000a18c, 0x07020703},
+ {0x0000a190, 0x07000701},
+ {0x0000a194, 0x00000000},
+ {0x0000a198, 0x00000000},
+ {0x0000a19c, 0x00000000},
+ {0x0000a1a0, 0x00000000},
+ {0x0000a1a4, 0x00000000},
+ {0x0000a1a8, 0x00000000},
+ {0x0000a1ac, 0x00000000},
+ {0x0000a1b0, 0x00000000},
+ {0x0000a1b4, 0x00000000},
+ {0x0000a1b8, 0x00000000},
+ {0x0000a1bc, 0x00000000},
+ {0x0000a1c0, 0x00000000},
+ {0x0000a1c4, 0x00000000},
+ {0x0000a1c8, 0x00000000},
+ {0x0000a1cc, 0x00000000},
+ {0x0000a1d0, 0x00000000},
+ {0x0000a1d4, 0x00000000},
+ {0x0000a1d8, 0x00000000},
+ {0x0000a1dc, 0x00000000},
+ {0x0000a1e0, 0x00000000},
+ {0x0000a1e4, 0x00000000},
+ {0x0000a1e8, 0x00000000},
+ {0x0000a1ec, 0x00000000},
+ {0x0000a1f0, 0x00000396},
+ {0x0000a1f4, 0x00000396},
+ {0x0000a1f8, 0x00000396},
+ {0x0000a1fc, 0x00000196},
+ {0x0000b000, 0x00010000},
+ {0x0000b004, 0x00030002},
+ {0x0000b008, 0x00050004},
+ {0x0000b00c, 0x00810080},
+ {0x0000b010, 0x00830082},
+ {0x0000b014, 0x01810180},
+ {0x0000b018, 0x01830182},
+ {0x0000b01c, 0x01850184},
+ {0x0000b020, 0x02810280},
+ {0x0000b024, 0x02830282},
+ {0x0000b028, 0x02850284},
+ {0x0000b02c, 0x02890288},
+ {0x0000b030, 0x028b028a},
+ {0x0000b034, 0x0388028c},
+ {0x0000b038, 0x038a0389},
+ {0x0000b03c, 0x038c038b},
+ {0x0000b040, 0x0390038d},
+ {0x0000b044, 0x03920391},
+ {0x0000b048, 0x03940393},
+ {0x0000b04c, 0x03960395},
+ {0x0000b050, 0x00000000},
+ {0x0000b054, 0x00000000},
+ {0x0000b058, 0x00000000},
+ {0x0000b05c, 0x00000000},
+ {0x0000b060, 0x00000000},
+ {0x0000b064, 0x00000000},
+ {0x0000b068, 0x00000000},
+ {0x0000b06c, 0x00000000},
+ {0x0000b070, 0x00000000},
+ {0x0000b074, 0x00000000},
+ {0x0000b078, 0x00000000},
+ {0x0000b07c, 0x00000000},
+ {0x0000b080, 0x32323232},
+ {0x0000b084, 0x2f2f3232},
+ {0x0000b088, 0x23282a2d},
+ {0x0000b08c, 0x1c1e2123},
+ {0x0000b090, 0x14171919},
+ {0x0000b094, 0x0e0e1214},
+ {0x0000b098, 0x03050707},
+ {0x0000b09c, 0x00030303},
+ {0x0000b0a0, 0x00000000},
+ {0x0000b0a4, 0x00000000},
+ {0x0000b0a8, 0x00000000},
+ {0x0000b0ac, 0x00000000},
+ {0x0000b0b0, 0x00000000},
+ {0x0000b0b4, 0x00000000},
+ {0x0000b0b8, 0x00000000},
+ {0x0000b0bc, 0x00000000},
+ {0x0000b0c0, 0x003f0020},
+ {0x0000b0c4, 0x00400041},
+ {0x0000b0c8, 0x0140005f},
+ {0x0000b0cc, 0x0160015f},
+ {0x0000b0d0, 0x017e017f},
+ {0x0000b0d4, 0x02410242},
+ {0x0000b0d8, 0x025f0240},
+ {0x0000b0dc, 0x027f0260},
+ {0x0000b0e0, 0x0341027e},
+ {0x0000b0e4, 0x035f0340},
+ {0x0000b0e8, 0x037f0360},
+ {0x0000b0ec, 0x04400441},
+ {0x0000b0f0, 0x0460045f},
+ {0x0000b0f4, 0x0541047f},
+ {0x0000b0f8, 0x055f0540},
+ {0x0000b0fc, 0x057f0560},
+ {0x0000b100, 0x06400641},
+ {0x0000b104, 0x0660065f},
+ {0x0000b108, 0x067e067f},
+ {0x0000b10c, 0x07410742},
+ {0x0000b110, 0x075f0740},
+ {0x0000b114, 0x077f0760},
+ {0x0000b118, 0x07800781},
+ {0x0000b11c, 0x07a0079f},
+ {0x0000b120, 0x07c107bf},
+ {0x0000b124, 0x000007c0},
+ {0x0000b128, 0x00000000},
+ {0x0000b12c, 0x00000000},
+ {0x0000b130, 0x00000000},
+ {0x0000b134, 0x00000000},
+ {0x0000b138, 0x00000000},
+ {0x0000b13c, 0x00000000},
+ {0x0000b140, 0x003f0020},
+ {0x0000b144, 0x00400041},
+ {0x0000b148, 0x0140005f},
+ {0x0000b14c, 0x0160015f},
+ {0x0000b150, 0x017e017f},
+ {0x0000b154, 0x02410242},
+ {0x0000b158, 0x025f0240},
+ {0x0000b15c, 0x027f0260},
+ {0x0000b160, 0x0341027e},
+ {0x0000b164, 0x035f0340},
+ {0x0000b168, 0x037f0360},
+ {0x0000b16c, 0x04400441},
+ {0x0000b170, 0x0460045f},
+ {0x0000b174, 0x0541047f},
+ {0x0000b178, 0x055f0540},
+ {0x0000b17c, 0x057f0560},
+ {0x0000b180, 0x06400641},
+ {0x0000b184, 0x0660065f},
+ {0x0000b188, 0x067e067f},
+ {0x0000b18c, 0x07410742},
+ {0x0000b190, 0x075f0740},
+ {0x0000b194, 0x077f0760},
+ {0x0000b198, 0x07800781},
+ {0x0000b19c, 0x07a0079f},
+ {0x0000b1a0, 0x07c107bf},
+ {0x0000b1a4, 0x000007c0},
+ {0x0000b1a8, 0x00000000},
+ {0x0000b1ac, 0x00000000},
+ {0x0000b1b0, 0x00000000},
+ {0x0000b1b4, 0x00000000},
+ {0x0000b1b8, 0x00000000},
+ {0x0000b1bc, 0x00000000},
+ {0x0000b1c0, 0x00000000},
+ {0x0000b1c4, 0x00000000},
+ {0x0000b1c8, 0x00000000},
+ {0x0000b1cc, 0x00000000},
+ {0x0000b1d0, 0x00000000},
+ {0x0000b1d4, 0x00000000},
+ {0x0000b1d8, 0x00000000},
+ {0x0000b1dc, 0x00000000},
+ {0x0000b1e0, 0x00000000},
+ {0x0000b1e4, 0x00000000},
+ {0x0000b1e8, 0x00000000},
+ {0x0000b1ec, 0x00000000},
+ {0x0000b1f0, 0x00000396},
+ {0x0000b1f4, 0x00000396},
+ {0x0000b1f8, 0x00000396},
+ {0x0000b1fc, 0x00000196},
+};
+
+static const u32 ar9340Modes_low_ob_db_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
+ {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
+ {0x0000a518, 0x21020220, 0x21020220, 0x16000402, 0x16000402},
+ {0x0000a51c, 0x27020223, 0x27020223, 0x19000404, 0x19000404},
+ {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
+ {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
+ {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
+ {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
+ {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
+ {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
+ {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
+ {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
+ {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
+ {0x0000a544, 0x5302266c, 0x5302266c, 0x3f001861, 0x3f001861},
+ {0x0000a548, 0x5702286c, 0x5702286c, 0x43001a81, 0x43001a81},
+ {0x0000a54c, 0x5c04286b, 0x5c04286b, 0x47001a83, 0x47001a83},
+ {0x0000a550, 0x61042a6c, 0x61042a6c, 0x4a001c84, 0x4a001c84},
+ {0x0000a554, 0x66062a6c, 0x66062a6c, 0x4e001ce3, 0x4e001ce3},
+ {0x0000a558, 0x6b062e6c, 0x6b062e6c, 0x52001ce5, 0x52001ce5},
+ {0x0000a55c, 0x7006308c, 0x7006308c, 0x56001ce9, 0x56001ce9},
+ {0x0000a560, 0x730a308a, 0x730a308a, 0x5a001ceb, 0x5a001ceb},
+ {0x0000a564, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a568, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a56c, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a570, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a574, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a578, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a57c, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+ {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
+ {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
+ {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
+ {0x0000a598, 0x21820220, 0x21820220, 0x16800402, 0x16800402},
+ {0x0000a59c, 0x27820223, 0x27820223, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
+ {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
+ {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
+ {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
+ {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
+ {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
+ {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
+ {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
+ {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
+ {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3f801861, 0x3f801861},
+ {0x0000a5c8, 0x5782286c, 0x5782286c, 0x43801a81, 0x43801a81},
+ {0x0000a5cc, 0x5c84286b, 0x5c84286b, 0x47801a83, 0x47801a83},
+ {0x0000a5d0, 0x61842a6c, 0x61842a6c, 0x4a801c84, 0x4a801c84},
+ {0x0000a5d4, 0x66862a6c, 0x66862a6c, 0x4e801ce3, 0x4e801ce3},
+ {0x0000a5d8, 0x6b862e6c, 0x6b862e6c, 0x52801ce5, 0x52801ce5},
+ {0x0000a5dc, 0x7086308c, 0x7086308c, 0x56801ce9, 0x56801ce9},
+ {0x0000a5e0, 0x738a308a, 0x738a308a, 0x5a801ceb, 0x5a801ceb},
+ {0x0000a5e4, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5e8, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5ec, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f0, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f4, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f8, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x0000a5fc, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+ {0x00016044, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+ {0x00016048, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+ {0x00016444, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+ {0x00016448, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+};
+
+static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = {
+ /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
+ {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
+ {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
+ {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
+ {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
+ {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x1c000223, 0x1c000223, 0x11000400, 0x11000400},
+ {0x0000a518, 0x21020220, 0x21020220, 0x15000402, 0x15000402},
+ {0x0000a51c, 0x27020223, 0x27020223, 0x19000404, 0x19000404},
+ {0x0000a520, 0x2b022220, 0x2b022220, 0x1b000603, 0x1b000603},
+ {0x0000a524, 0x2f022222, 0x2f022222, 0x1f000a02, 0x1f000a02},
+ {0x0000a528, 0x34022225, 0x34022225, 0x23000a04, 0x23000a04},
+ {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x26000a20, 0x26000a20},
+ {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2a000e20, 0x2a000e20},
+ {0x0000a534, 0x4202242a, 0x4202242a, 0x2e000e22, 0x2e000e22},
+ {0x0000a538, 0x4702244a, 0x4702244a, 0x31000e24, 0x31000e24},
+ {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x34001640, 0x34001640},
+ {0x0000a540, 0x4e02246c, 0x4e02246c, 0x38001660, 0x38001660},
+ {0x0000a544, 0x5302266c, 0x5302266c, 0x3b001861, 0x3b001861},
+ {0x0000a548, 0x5702286c, 0x5702286c, 0x3e001a81, 0x3e001a81},
+ {0x0000a54c, 0x5c04286b, 0x5c04286b, 0x42001a83, 0x42001a83},
+ {0x0000a550, 0x61042a6c, 0x61042a6c, 0x44001c84, 0x44001c84},
+ {0x0000a554, 0x66062a6c, 0x66062a6c, 0x48001ce3, 0x48001ce3},
+ {0x0000a558, 0x6b062e6c, 0x6b062e6c, 0x4c001ce5, 0x4c001ce5},
+ {0x0000a55c, 0x7006308c, 0x7006308c, 0x50001ce9, 0x50001ce9},
+ {0x0000a560, 0x730a308a, 0x730a308a, 0x54001ceb, 0x54001ceb},
+ {0x0000a564, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a568, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a56c, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a570, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a574, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a578, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a57c, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+ {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
+ {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
+ {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
+ {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
+ {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x1c800223, 0x1c800223, 0x11800400, 0x11800400},
+ {0x0000a598, 0x21820220, 0x21820220, 0x15800402, 0x15800402},
+ {0x0000a59c, 0x27820223, 0x27820223, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1b800603, 0x1b800603},
+ {0x0000a5a4, 0x2f822222, 0x2f822222, 0x1f800a02, 0x1f800a02},
+ {0x0000a5a8, 0x34822225, 0x34822225, 0x23800a04, 0x23800a04},
+ {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x26800a20, 0x26800a20},
+ {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2a800e20, 0x2a800e20},
+ {0x0000a5b4, 0x4282242a, 0x4282242a, 0x2e800e22, 0x2e800e22},
+ {0x0000a5b8, 0x4782244a, 0x4782244a, 0x31800e24, 0x31800e24},
+ {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x34801640, 0x34801640},
+ {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x38801660, 0x38801660},
+ {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3b801861, 0x3b801861},
+ {0x0000a5c8, 0x5782286c, 0x5782286c, 0x3e801a81, 0x3e801a81},
+ {0x0000a5cc, 0x5c84286b, 0x5c84286b, 0x42801a83, 0x42801a83},
+ {0x0000a5d0, 0x61842a6c, 0x61842a6c, 0x44801c84, 0x44801c84},
+ {0x0000a5d4, 0x66862a6c, 0x66862a6c, 0x48801ce3, 0x48801ce3},
+ {0x0000a5d8, 0x6b862e6c, 0x6b862e6c, 0x4c801ce5, 0x4c801ce5},
+ {0x0000a5dc, 0x7086308c, 0x7086308c, 0x50801ce9, 0x50801ce9},
+ {0x0000a5e0, 0x738a308a, 0x738a308a, 0x54801ceb, 0x54801ceb},
+ {0x0000a5e4, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5e8, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5ec, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5f0, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5f4, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5f8, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x0000a5fc, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+ {0x00016044, 0x056db2db, 0x056db2db, 0x03b6d2e4, 0x03b6d2e4},
+ {0x00016048, 0x24927266, 0x24927266, 0x8e483266, 0x8e483266},
+ {0x00016444, 0x056db2db, 0x056db2db, 0x03b6d2e4, 0x03b6d2e4},
+ {0x00016448, 0x24927266, 0x24927266, 0x8e482266, 0x8e482266},
+};
+
+static const u32 ar9340_1p0_mac_core[][2] = {
+ /* Addr allmodes */
+ {0x00000008, 0x00000000},
+ {0x00000030, 0x00020085},
+ {0x00000034, 0x00000005},
+ {0x00000040, 0x00000000},
+ {0x00000044, 0x00000000},
+ {0x00000048, 0x00000008},
+ {0x0000004c, 0x00000010},
+ {0x00000050, 0x00000000},
+ {0x00001040, 0x002ffc0f},
+ {0x00001044, 0x002ffc0f},
+ {0x00001048, 0x002ffc0f},
+ {0x0000104c, 0x002ffc0f},
+ {0x00001050, 0x002ffc0f},
+ {0x00001054, 0x002ffc0f},
+ {0x00001058, 0x002ffc0f},
+ {0x0000105c, 0x002ffc0f},
+ {0x00001060, 0x002ffc0f},
+ {0x00001064, 0x002ffc0f},
+ {0x000010f0, 0x00000100},
+ {0x00001270, 0x00000000},
+ {0x000012b0, 0x00000000},
+ {0x000012f0, 0x00000000},
+ {0x0000143c, 0x00000000},
+ {0x0000147c, 0x00000000},
+ {0x00008000, 0x00000000},
+ {0x00008004, 0x00000000},
+ {0x00008008, 0x00000000},
+ {0x0000800c, 0x00000000},
+ {0x00008018, 0x00000000},
+ {0x00008020, 0x00000000},
+ {0x00008038, 0x00000000},
+ {0x0000803c, 0x00000000},
+ {0x00008040, 0x00000000},
+ {0x00008044, 0x00000000},
+ {0x00008048, 0x00000000},
+ {0x0000804c, 0xffffffff},
+ {0x00008054, 0x00000000},
+ {0x00008058, 0x00000000},
+ {0x0000805c, 0x000fc78f},
+ {0x00008060, 0x0000000f},
+ {0x00008064, 0x00000000},
+ {0x00008070, 0x00000310},
+ {0x00008074, 0x00000020},
+ {0x00008078, 0x00000000},
+ {0x0000809c, 0x0000000f},
+ {0x000080a0, 0x00000000},
+ {0x000080a4, 0x02ff0000},
+ {0x000080a8, 0x0e070605},
+ {0x000080ac, 0x0000000d},
+ {0x000080b0, 0x00000000},
+ {0x000080b4, 0x00000000},
+ {0x000080b8, 0x00000000},
+ {0x000080bc, 0x00000000},
+ {0x000080c0, 0x2a800000},
+ {0x000080c4, 0x06900168},
+ {0x000080c8, 0x13881c20},
+ {0x000080cc, 0x01f40000},
+ {0x000080d0, 0x00252500},
+ {0x000080d4, 0x00a00000},
+ {0x000080d8, 0x00400000},
+ {0x000080dc, 0x00000000},
+ {0x000080e0, 0xffffffff},
+ {0x000080e4, 0x0000ffff},
+ {0x000080e8, 0x3f3f3f3f},
+ {0x000080ec, 0x00000000},
+ {0x000080f0, 0x00000000},
+ {0x000080f4, 0x00000000},
+ {0x000080fc, 0x00020000},
+ {0x00008100, 0x00000000},
+ {0x00008108, 0x00000052},
+ {0x0000810c, 0x00000000},
+ {0x00008110, 0x00000000},
+ {0x00008114, 0x000007ff},
+ {0x00008118, 0x000000aa},
+ {0x0000811c, 0x00003210},
+ {0x00008124, 0x00000000},
+ {0x00008128, 0x00000000},
+ {0x0000812c, 0x00000000},
+ {0x00008130, 0x00000000},
+ {0x00008134, 0x00000000},
+ {0x00008138, 0x00000000},
+ {0x0000813c, 0x0000ffff},
+ {0x00008144, 0xffffffff},
+ {0x00008168, 0x00000000},
+ {0x0000816c, 0x00000000},
+ {0x00008170, 0x18486200},
+ {0x00008174, 0x33332210},
+ {0x00008178, 0x00000000},
+ {0x0000817c, 0x00020000},
+ {0x000081c0, 0x00000000},
+ {0x000081c4, 0x33332210},
+ {0x000081c8, 0x00000000},
+ {0x000081cc, 0x00000000},
+ {0x000081d4, 0x00000000},
+ {0x000081ec, 0x00000000},
+ {0x000081f0, 0x00000000},
+ {0x000081f4, 0x00000000},
+ {0x000081f8, 0x00000000},
+ {0x000081fc, 0x00000000},
+ {0x00008240, 0x00100000},
+ {0x00008244, 0x0010f424},
+ {0x00008248, 0x00000800},
+ {0x0000824c, 0x0001e848},
+ {0x00008250, 0x00000000},
+ {0x00008254, 0x00000000},
+ {0x00008258, 0x00000000},
+ {0x0000825c, 0x40000000},
+ {0x00008260, 0x00080922},
+ {0x00008264, 0x9d400010},
+ {0x00008268, 0xffffffff},
+ {0x0000826c, 0x0000ffff},
+ {0x00008270, 0x00000000},
+ {0x00008274, 0x40000000},
+ {0x00008278, 0x003e4180},
+ {0x0000827c, 0x00000004},
+ {0x00008284, 0x0000002c},
+ {0x00008288, 0x0000002c},
+ {0x0000828c, 0x000000ff},
+ {0x00008294, 0x00000000},
+ {0x00008298, 0x00000000},
+ {0x0000829c, 0x00000000},
+ {0x00008300, 0x00000140},
+ {0x00008314, 0x00000000},
+ {0x0000831c, 0x0000010d},
+ {0x00008328, 0x00000000},
+ {0x0000832c, 0x00000007},
+ {0x00008330, 0x00000302},
+ {0x00008334, 0x00000700},
+ {0x00008338, 0x00ff0000},
+ {0x0000833c, 0x02400000},
+ {0x00008340, 0x000107ff},
+ {0x00008344, 0xaa48105b},
+ {0x00008348, 0x008f0000},
+ {0x0000835c, 0x00000000},
+ {0x00008360, 0xffffffff},
+ {0x00008364, 0xffffffff},
+ {0x00008368, 0x00000000},
+ {0x00008370, 0x00000000},
+ {0x00008374, 0x000000ff},
+ {0x00008378, 0x00000000},
+ {0x0000837c, 0x00000000},
+ {0x00008380, 0xffffffff},
+ {0x00008384, 0xffffffff},
+ {0x00008390, 0xffffffff},
+ {0x00008394, 0xffffffff},
+ {0x00008398, 0x00000000},
+ {0x0000839c, 0x00000000},
+ {0x000083a0, 0x00000000},
+ {0x000083a4, 0x0000fa14},
+ {0x000083a8, 0x000f0c00},
+ {0x000083ac, 0x33332210},
+ {0x000083b0, 0x33332210},
+ {0x000083b4, 0x33332210},
+ {0x000083b8, 0x33332210},
+ {0x000083bc, 0x00000000},
+ {0x000083c0, 0x00000000},
+ {0x000083c4, 0x00000000},
+ {0x000083c8, 0x00000000},
+ {0x000083cc, 0x00000200},
+ {0x000083d0, 0x000301ff},
+};
+
+static const u32 ar9340Common_wo_xlna_rx_gain_table_1p0[][2] = {
+ /* Addr allmodes */
+ {0x0000a000, 0x00010000},
+ {0x0000a004, 0x00030002},
+ {0x0000a008, 0x00050004},
+ {0x0000a00c, 0x00810080},
+ {0x0000a010, 0x00830082},
+ {0x0000a014, 0x01810180},
+ {0x0000a018, 0x01830182},
+ {0x0000a01c, 0x01850184},
+ {0x0000a020, 0x01890188},
+ {0x0000a024, 0x018b018a},
+ {0x0000a028, 0x018d018c},
+ {0x0000a02c, 0x03820190},
+ {0x0000a030, 0x03840383},
+ {0x0000a034, 0x03880385},
+ {0x0000a038, 0x038a0389},
+ {0x0000a03c, 0x038c038b},
+ {0x0000a040, 0x0390038d},
+ {0x0000a044, 0x03920391},
+ {0x0000a048, 0x03940393},
+ {0x0000a04c, 0x03960395},
+ {0x0000a050, 0x00000000},
+ {0x0000a054, 0x00000000},
+ {0x0000a058, 0x00000000},
+ {0x0000a05c, 0x00000000},
+ {0x0000a060, 0x00000000},
+ {0x0000a064, 0x00000000},
+ {0x0000a068, 0x00000000},
+ {0x0000a06c, 0x00000000},
+ {0x0000a070, 0x00000000},
+ {0x0000a074, 0x00000000},
+ {0x0000a078, 0x00000000},
+ {0x0000a07c, 0x00000000},
+ {0x0000a080, 0x29292929},
+ {0x0000a084, 0x29292929},
+ {0x0000a088, 0x29292929},
+ {0x0000a08c, 0x29292929},
+ {0x0000a090, 0x22292929},
+ {0x0000a094, 0x1d1d2222},
+ {0x0000a098, 0x0c111117},
+ {0x0000a09c, 0x00030303},
+ {0x0000a0a0, 0x00000000},
+ {0x0000a0a4, 0x00000000},
+ {0x0000a0a8, 0x00000000},
+ {0x0000a0ac, 0x00000000},
+ {0x0000a0b0, 0x00000000},
+ {0x0000a0b4, 0x00000000},
+ {0x0000a0b8, 0x00000000},
+ {0x0000a0bc, 0x00000000},
+ {0x0000a0c0, 0x001f0000},
+ {0x0000a0c4, 0x01000101},
+ {0x0000a0c8, 0x011e011f},
+ {0x0000a0cc, 0x011c011d},
+ {0x0000a0d0, 0x02030204},
+ {0x0000a0d4, 0x02010202},
+ {0x0000a0d8, 0x021f0200},
+ {0x0000a0dc, 0x0302021e},
+ {0x0000a0e0, 0x03000301},
+ {0x0000a0e4, 0x031e031f},
+ {0x0000a0e8, 0x0402031d},
+ {0x0000a0ec, 0x04000401},
+ {0x0000a0f0, 0x041e041f},
+ {0x0000a0f4, 0x0502041d},
+ {0x0000a0f8, 0x05000501},
+ {0x0000a0fc, 0x051e051f},
+ {0x0000a100, 0x06010602},
+ {0x0000a104, 0x061f0600},
+ {0x0000a108, 0x061d061e},
+ {0x0000a10c, 0x07020703},
+ {0x0000a110, 0x07000701},
+ {0x0000a114, 0x00000000},
+ {0x0000a118, 0x00000000},
+ {0x0000a11c, 0x00000000},
+ {0x0000a120, 0x00000000},
+ {0x0000a124, 0x00000000},
+ {0x0000a128, 0x00000000},
+ {0x0000a12c, 0x00000000},
+ {0x0000a130, 0x00000000},
+ {0x0000a134, 0x00000000},
+ {0x0000a138, 0x00000000},
+ {0x0000a13c, 0x00000000},
+ {0x0000a140, 0x001f0000},
+ {0x0000a144, 0x01000101},
+ {0x0000a148, 0x011e011f},
+ {0x0000a14c, 0x011c011d},
+ {0x0000a150, 0x02030204},
+ {0x0000a154, 0x02010202},
+ {0x0000a158, 0x021f0200},
+ {0x0000a15c, 0x0302021e},
+ {0x0000a160, 0x03000301},
+ {0x0000a164, 0x031e031f},
+ {0x0000a168, 0x0402031d},
+ {0x0000a16c, 0x04000401},
+ {0x0000a170, 0x041e041f},
+ {0x0000a174, 0x0502041d},
+ {0x0000a178, 0x05000501},
+ {0x0000a17c, 0x051e051f},
+ {0x0000a180, 0x06010602},
+ {0x0000a184, 0x061f0600},
+ {0x0000a188, 0x061d061e},
+ {0x0000a18c, 0x07020703},
+ {0x0000a190, 0x07000701},
+ {0x0000a194, 0x00000000},
+ {0x0000a198, 0x00000000},
+ {0x0000a19c, 0x00000000},
+ {0x0000a1a0, 0x00000000},
+ {0x0000a1a4, 0x00000000},
+ {0x0000a1a8, 0x00000000},
+ {0x0000a1ac, 0x00000000},
+ {0x0000a1b0, 0x00000000},
+ {0x0000a1b4, 0x00000000},
+ {0x0000a1b8, 0x00000000},
+ {0x0000a1bc, 0x00000000},
+ {0x0000a1c0, 0x00000000},
+ {0x0000a1c4, 0x00000000},
+ {0x0000a1c8, 0x00000000},
+ {0x0000a1cc, 0x00000000},
+ {0x0000a1d0, 0x00000000},
+ {0x0000a1d4, 0x00000000},
+ {0x0000a1d8, 0x00000000},
+ {0x0000a1dc, 0x00000000},
+ {0x0000a1e0, 0x00000000},
+ {0x0000a1e4, 0x00000000},
+ {0x0000a1e8, 0x00000000},
+ {0x0000a1ec, 0x00000000},
+ {0x0000a1f0, 0x00000396},
+ {0x0000a1f4, 0x00000396},
+ {0x0000a1f8, 0x00000396},
+ {0x0000a1fc, 0x00000196},
+ {0x0000b000, 0x00010000},
+ {0x0000b004, 0x00030002},
+ {0x0000b008, 0x00050004},
+ {0x0000b00c, 0x00810080},
+ {0x0000b010, 0x00830082},
+ {0x0000b014, 0x01810180},
+ {0x0000b018, 0x01830182},
+ {0x0000b01c, 0x01850184},
+ {0x0000b020, 0x02810280},
+ {0x0000b024, 0x02830282},
+ {0x0000b028, 0x02850284},
+ {0x0000b02c, 0x02890288},
+ {0x0000b030, 0x028b028a},
+ {0x0000b034, 0x0388028c},
+ {0x0000b038, 0x038a0389},
+ {0x0000b03c, 0x038c038b},
+ {0x0000b040, 0x0390038d},
+ {0x0000b044, 0x03920391},
+ {0x0000b048, 0x03940393},
+ {0x0000b04c, 0x03960395},
+ {0x0000b050, 0x00000000},
+ {0x0000b054, 0x00000000},
+ {0x0000b058, 0x00000000},
+ {0x0000b05c, 0x00000000},
+ {0x0000b060, 0x00000000},
+ {0x0000b064, 0x00000000},
+ {0x0000b068, 0x00000000},
+ {0x0000b06c, 0x00000000},
+ {0x0000b070, 0x00000000},
+ {0x0000b074, 0x00000000},
+ {0x0000b078, 0x00000000},
+ {0x0000b07c, 0x00000000},
+ {0x0000b080, 0x32323232},
+ {0x0000b084, 0x2f2f3232},
+ {0x0000b088, 0x23282a2d},
+ {0x0000b08c, 0x1c1e2123},
+ {0x0000b090, 0x14171919},
+ {0x0000b094, 0x0e0e1214},
+ {0x0000b098, 0x03050707},
+ {0x0000b09c, 0x00030303},
+ {0x0000b0a0, 0x00000000},
+ {0x0000b0a4, 0x00000000},
+ {0x0000b0a8, 0x00000000},
+ {0x0000b0ac, 0x00000000},
+ {0x0000b0b0, 0x00000000},
+ {0x0000b0b4, 0x00000000},
+ {0x0000b0b8, 0x00000000},
+ {0x0000b0bc, 0x00000000},
+ {0x0000b0c0, 0x003f0020},
+ {0x0000b0c4, 0x00400041},
+ {0x0000b0c8, 0x0140005f},
+ {0x0000b0cc, 0x0160015f},
+ {0x0000b0d0, 0x017e017f},
+ {0x0000b0d4, 0x02410242},
+ {0x0000b0d8, 0x025f0240},
+ {0x0000b0dc, 0x027f0260},
+ {0x0000b0e0, 0x0341027e},
+ {0x0000b0e4, 0x035f0340},
+ {0x0000b0e8, 0x037f0360},
+ {0x0000b0ec, 0x04400441},
+ {0x0000b0f0, 0x0460045f},
+ {0x0000b0f4, 0x0541047f},
+ {0x0000b0f8, 0x055f0540},
+ {0x0000b0fc, 0x057f0560},
+ {0x0000b100, 0x06400641},
+ {0x0000b104, 0x0660065f},
+ {0x0000b108, 0x067e067f},
+ {0x0000b10c, 0x07410742},
+ {0x0000b110, 0x075f0740},
+ {0x0000b114, 0x077f0760},
+ {0x0000b118, 0x07800781},
+ {0x0000b11c, 0x07a0079f},
+ {0x0000b120, 0x07c107bf},
+ {0x0000b124, 0x000007c0},
+ {0x0000b128, 0x00000000},
+ {0x0000b12c, 0x00000000},
+ {0x0000b130, 0x00000000},
+ {0x0000b134, 0x00000000},
+ {0x0000b138, 0x00000000},
+ {0x0000b13c, 0x00000000},
+ {0x0000b140, 0x003f0020},
+ {0x0000b144, 0x00400041},
+ {0x0000b148, 0x0140005f},
+ {0x0000b14c, 0x0160015f},
+ {0x0000b150, 0x017e017f},
+ {0x0000b154, 0x02410242},
+ {0x0000b158, 0x025f0240},
+ {0x0000b15c, 0x027f0260},
+ {0x0000b160, 0x0341027e},
+ {0x0000b164, 0x035f0340},
+ {0x0000b168, 0x037f0360},
+ {0x0000b16c, 0x04400441},
+ {0x0000b170, 0x0460045f},
+ {0x0000b174, 0x0541047f},
+ {0x0000b178, 0x055f0540},
+ {0x0000b17c, 0x057f0560},
+ {0x0000b180, 0x06400641},
+ {0x0000b184, 0x0660065f},
+ {0x0000b188, 0x067e067f},
+ {0x0000b18c, 0x07410742},
+ {0x0000b190, 0x075f0740},
+ {0x0000b194, 0x077f0760},
+ {0x0000b198, 0x07800781},
+ {0x0000b19c, 0x07a0079f},
+ {0x0000b1a0, 0x07c107bf},
+ {0x0000b1a4, 0x000007c0},
+ {0x0000b1a8, 0x00000000},
+ {0x0000b1ac, 0x00000000},
+ {0x0000b1b0, 0x00000000},
+ {0x0000b1b4, 0x00000000},
+ {0x0000b1b8, 0x00000000},
+ {0x0000b1bc, 0x00000000},
+ {0x0000b1c0, 0x00000000},
+ {0x0000b1c4, 0x00000000},
+ {0x0000b1c8, 0x00000000},
+ {0x0000b1cc, 0x00000000},
+ {0x0000b1d0, 0x00000000},
+ {0x0000b1d4, 0x00000000},
+ {0x0000b1d8, 0x00000000},
+ {0x0000b1dc, 0x00000000},
+ {0x0000b1e0, 0x00000000},
+ {0x0000b1e4, 0x00000000},
+ {0x0000b1e8, 0x00000000},
+ {0x0000b1ec, 0x00000000},
+ {0x0000b1f0, 0x00000396},
+ {0x0000b1f4, 0x00000396},
+ {0x0000b1f8, 0x00000396},
+ {0x0000b1fc, 0x00000196},
+};
+
+static const u32 ar9340_1p0_soc_preamble[][2] = {
+ /* Addr allmodes */
+ {0x000040a4, 0x00a0c1c9},
+ {0x00007008, 0x00000000},
+ {0x00007020, 0x00000000},
+ {0x00007034, 0x00000002},
+ {0x00007038, 0x000004c2},
+};
+
+#endif
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index 71cc0a3..fbdde29 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -17,931 +17,6 @@
#ifndef INITVALS_9485_H
#define INITVALS_9485_H
-static const u32 ar9485Common_1_0[][2] = {
- /* Addr allmodes */
- {0x00007010, 0x00000022},
- {0x00007020, 0x00000000},
- {0x00007034, 0x00000002},
- {0x00007038, 0x000004c2},
-};
-
-static const u32 ar9485_1_0_mac_postamble[][5] = {
- /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
- {0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
- {0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
- {0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
- {0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
- {0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
- {0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
- {0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
-};
-
-static const u32 ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x10212e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000580c},
-};
-
-static const u32 ar9485Common_wo_xlna_rx_gain_1_0[][2] = {
- /* Addr allmodes */
- {0x0000a000, 0x00010000},
- {0x0000a004, 0x00030002},
- {0x0000a008, 0x00050004},
- {0x0000a00c, 0x00810080},
- {0x0000a010, 0x01800082},
- {0x0000a014, 0x01820181},
- {0x0000a018, 0x01840183},
- {0x0000a01c, 0x01880185},
- {0x0000a020, 0x018a0189},
- {0x0000a024, 0x02850284},
- {0x0000a028, 0x02890288},
- {0x0000a02c, 0x03850384},
- {0x0000a030, 0x03890388},
- {0x0000a034, 0x038b038a},
- {0x0000a038, 0x038d038c},
- {0x0000a03c, 0x03910390},
- {0x0000a040, 0x03930392},
- {0x0000a044, 0x03950394},
- {0x0000a048, 0x00000396},
- {0x0000a04c, 0x00000000},
- {0x0000a050, 0x00000000},
- {0x0000a054, 0x00000000},
- {0x0000a058, 0x00000000},
- {0x0000a05c, 0x00000000},
- {0x0000a060, 0x00000000},
- {0x0000a064, 0x00000000},
- {0x0000a068, 0x00000000},
- {0x0000a06c, 0x00000000},
- {0x0000a070, 0x00000000},
- {0x0000a074, 0x00000000},
- {0x0000a078, 0x00000000},
- {0x0000a07c, 0x00000000},
- {0x0000a080, 0x28282828},
- {0x0000a084, 0x28282828},
- {0x0000a088, 0x28282828},
- {0x0000a08c, 0x28282828},
- {0x0000a090, 0x28282828},
- {0x0000a094, 0x21212128},
- {0x0000a098, 0x171c1c1c},
- {0x0000a09c, 0x02020212},
- {0x0000a0a0, 0x00000202},
- {0x0000a0a4, 0x00000000},
- {0x0000a0a8, 0x00000000},
- {0x0000a0ac, 0x00000000},
- {0x0000a0b0, 0x00000000},
- {0x0000a0b4, 0x00000000},
- {0x0000a0b8, 0x00000000},
- {0x0000a0bc, 0x00000000},
- {0x0000a0c0, 0x001f0000},
- {0x0000a0c4, 0x111f1100},
- {0x0000a0c8, 0x111d111e},
- {0x0000a0cc, 0x111b111c},
- {0x0000a0d0, 0x22032204},
- {0x0000a0d4, 0x22012202},
- {0x0000a0d8, 0x221f2200},
- {0x0000a0dc, 0x221d221e},
- {0x0000a0e0, 0x33013302},
- {0x0000a0e4, 0x331f3300},
- {0x0000a0e8, 0x4402331e},
- {0x0000a0ec, 0x44004401},
- {0x0000a0f0, 0x441e441f},
- {0x0000a0f4, 0x55015502},
- {0x0000a0f8, 0x551f5500},
- {0x0000a0fc, 0x6602551e},
- {0x0000a100, 0x66006601},
- {0x0000a104, 0x661e661f},
- {0x0000a108, 0x7703661d},
- {0x0000a10c, 0x77017702},
- {0x0000a110, 0x00007700},
- {0x0000a114, 0x00000000},
- {0x0000a118, 0x00000000},
- {0x0000a11c, 0x00000000},
- {0x0000a120, 0x00000000},
- {0x0000a124, 0x00000000},
- {0x0000a128, 0x00000000},
- {0x0000a12c, 0x00000000},
- {0x0000a130, 0x00000000},
- {0x0000a134, 0x00000000},
- {0x0000a138, 0x00000000},
- {0x0000a13c, 0x00000000},
- {0x0000a140, 0x001f0000},
- {0x0000a144, 0x111f1100},
- {0x0000a148, 0x111d111e},
- {0x0000a14c, 0x111b111c},
- {0x0000a150, 0x22032204},
- {0x0000a154, 0x22012202},
- {0x0000a158, 0x221f2200},
- {0x0000a15c, 0x221d221e},
- {0x0000a160, 0x33013302},
- {0x0000a164, 0x331f3300},
- {0x0000a168, 0x4402331e},
- {0x0000a16c, 0x44004401},
- {0x0000a170, 0x441e441f},
- {0x0000a174, 0x55015502},
- {0x0000a178, 0x551f5500},
- {0x0000a17c, 0x6602551e},
- {0x0000a180, 0x66006601},
- {0x0000a184, 0x661e661f},
- {0x0000a188, 0x7703661d},
- {0x0000a18c, 0x77017702},
- {0x0000a190, 0x00007700},
- {0x0000a194, 0x00000000},
- {0x0000a198, 0x00000000},
- {0x0000a19c, 0x00000000},
- {0x0000a1a0, 0x00000000},
- {0x0000a1a4, 0x00000000},
- {0x0000a1a8, 0x00000000},
- {0x0000a1ac, 0x00000000},
- {0x0000a1b0, 0x00000000},
- {0x0000a1b4, 0x00000000},
- {0x0000a1b8, 0x00000000},
- {0x0000a1bc, 0x00000000},
- {0x0000a1c0, 0x00000000},
- {0x0000a1c4, 0x00000000},
- {0x0000a1c8, 0x00000000},
- {0x0000a1cc, 0x00000000},
- {0x0000a1d0, 0x00000000},
- {0x0000a1d4, 0x00000000},
- {0x0000a1d8, 0x00000000},
- {0x0000a1dc, 0x00000000},
- {0x0000a1e0, 0x00000000},
- {0x0000a1e4, 0x00000000},
- {0x0000a1e8, 0x00000000},
- {0x0000a1ec, 0x00000000},
- {0x0000a1f0, 0x00000396},
- {0x0000a1f4, 0x00000396},
- {0x0000a1f8, 0x00000396},
- {0x0000a1fc, 0x00000296},
-};
-
-static const u32 ar9485Modes_high_power_tx_gain_1_0[][5] = {
- /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
- {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
- {0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
- {0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
- {0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
- {0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
- {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
- {0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
- {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
- {0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
- {0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
- {0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
- {0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
- {0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
- {0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
- {0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
- {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
- {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
- {0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
- {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
- {0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
- {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
- {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
- {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
- {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
- {0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
- {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
-};
-
-static const u32 ar9485_1_0[][2] = {
- /* Addr allmodes */
- {0x0000a580, 0x00000000},
- {0x0000a584, 0x00000000},
- {0x0000a588, 0x00000000},
- {0x0000a58c, 0x00000000},
- {0x0000a590, 0x00000000},
- {0x0000a594, 0x00000000},
- {0x0000a598, 0x00000000},
- {0x0000a59c, 0x00000000},
- {0x0000a5a0, 0x00000000},
- {0x0000a5a4, 0x00000000},
- {0x0000a5a8, 0x00000000},
- {0x0000a5ac, 0x00000000},
- {0x0000a5b0, 0x00000000},
- {0x0000a5b4, 0x00000000},
- {0x0000a5b8, 0x00000000},
- {0x0000a5bc, 0x00000000},
-};
-
-static const u32 ar9485_1_0_radio_core[][2] = {
- /* Addr allmodes */
- {0x00016000, 0x36db6db6},
- {0x00016004, 0x6db6db40},
- {0x00016008, 0x73800000},
- {0x0001600c, 0x00000000},
- {0x00016040, 0x7f80fff8},
- {0x00016048, 0x6c92426e},
- {0x0001604c, 0x000f0278},
- {0x00016050, 0x6db6db6c},
- {0x00016054, 0x6db60000},
- {0x00016080, 0x00080000},
- {0x00016084, 0x0e48048c},
- {0x00016088, 0x14214514},
- {0x0001608c, 0x119f081e},
- {0x00016090, 0x24926490},
- {0x00016098, 0xd28b3330},
- {0x000160a0, 0xc2108ffe},
- {0x000160a4, 0x812fc370},
- {0x000160a8, 0x423c8000},
- {0x000160b4, 0x92480040},
- {0x000160c0, 0x006db6db},
- {0x000160c4, 0x0186db60},
- {0x000160c8, 0x6db6db6c},
- {0x000160cc, 0x6de6fbe0},
- {0x000160d0, 0xf7dfcf3c},
- {0x00016100, 0x04cb0001},
- {0x00016104, 0xfff80015},
- {0x00016108, 0x00080010},
- {0x00016144, 0x01884080},
- {0x00016148, 0x00008040},
- {0x00016180, 0x08453333},
- {0x00016184, 0x18e82f01},
- {0x00016188, 0x00000000},
- {0x0001618c, 0x00000000},
- {0x00016240, 0x08400000},
- {0x00016244, 0x1bf90f00},
- {0x00016248, 0x00000000},
- {0x0001624c, 0x00000000},
- {0x00016280, 0x01000015},
- {0x00016284, 0x00d30000},
- {0x00016288, 0x00318000},
- {0x0001628c, 0x50000000},
- {0x00016290, 0x4b96210f},
- {0x00016380, 0x00000000},
- {0x00016384, 0x00000000},
- {0x00016388, 0x00800700},
- {0x0001638c, 0x00800700},
- {0x00016390, 0x00800700},
- {0x00016394, 0x00000000},
- {0x00016398, 0x00000000},
- {0x0001639c, 0x00000000},
- {0x000163a0, 0x00000001},
- {0x000163a4, 0x00000001},
- {0x000163a8, 0x00000000},
- {0x000163ac, 0x00000000},
- {0x000163b0, 0x00000000},
- {0x000163b4, 0x00000000},
- {0x000163b8, 0x00000000},
- {0x000163bc, 0x00000000},
- {0x000163c0, 0x000000a0},
- {0x000163c4, 0x000c0000},
- {0x000163c8, 0x14021402},
- {0x000163cc, 0x00001402},
- {0x000163d0, 0x00000000},
- {0x000163d4, 0x00000000},
- {0x00016c40, 0x1319c178},
- {0x00016c44, 0x10000000},
-};
-
-static const u32 ar9485Modes_lowest_ob_db_tx_gain_1_0[][5] = {
- /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
- {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
- {0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
- {0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
- {0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
- {0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
- {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
- {0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
- {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
- {0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
- {0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
- {0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
- {0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
- {0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
- {0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
- {0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
- {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
- {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
- {0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
- {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
- {0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
- {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
- {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
- {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
- {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
- {0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
- {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
-};
-
-static const u32 ar9485_1_0_baseband_core[][2] = {
- /* Addr allmodes */
- {0x00009800, 0xafe68e30},
- {0x00009804, 0xfd14e000},
- {0x00009808, 0x9c0a8f6b},
- {0x0000980c, 0x04800000},
- {0x00009814, 0x9280c00a},
- {0x00009818, 0x00000000},
- {0x0000981c, 0x00020028},
- {0x00009834, 0x5f3ca3de},
- {0x00009838, 0x0108ecff},
- {0x0000983c, 0x14750600},
- {0x00009880, 0x201fff00},
- {0x00009884, 0x00001042},
- {0x000098a4, 0x00200400},
- {0x000098b0, 0x52440bbe},
- {0x000098bc, 0x00000002},
- {0x000098d0, 0x004b6a8e},
- {0x000098d4, 0x00000820},
- {0x000098dc, 0x00000000},
- {0x000098f0, 0x00000000},
- {0x000098f4, 0x00000000},
- {0x00009c04, 0x00000000},
- {0x00009c08, 0x03200000},
- {0x00009c0c, 0x00000000},
- {0x00009c10, 0x00000000},
- {0x00009c14, 0x00046384},
- {0x00009c18, 0x05b6b440},
- {0x00009c1c, 0x00b6b440},
- {0x00009d00, 0xc080a333},
- {0x00009d04, 0x40206c10},
- {0x00009d08, 0x009c4060},
- {0x00009d0c, 0x1883800a},
- {0x00009d10, 0x01834061},
- {0x00009d14, 0x00c00400},
- {0x00009d18, 0x00000000},
- {0x00009d1c, 0x00000000},
- {0x00009e08, 0x0038233c},
- {0x00009e24, 0x990bb515},
- {0x00009e28, 0x0a6f0000},
- {0x00009e30, 0x06336f77},
- {0x00009e34, 0x6af6532f},
- {0x00009e38, 0x0cc80c00},
- {0x00009e40, 0x0d261820},
- {0x00009e4c, 0x00001004},
- {0x00009e50, 0x00ff03f1},
- {0x00009fc0, 0x80be4788},
- {0x00009fc4, 0x0001efb5},
- {0x00009fcc, 0x40000014},
- {0x0000a20c, 0x00000000},
- {0x0000a210, 0x00000000},
- {0x0000a220, 0x00000000},
- {0x0000a224, 0x00000000},
- {0x0000a228, 0x10002310},
- {0x0000a23c, 0x00000000},
- {0x0000a244, 0x0c000000},
- {0x0000a2a0, 0x00000001},
- {0x0000a2c0, 0x00000001},
- {0x0000a2c8, 0x00000000},
- {0x0000a2cc, 0x18c43433},
- {0x0000a2d4, 0x00000000},
- {0x0000a2dc, 0x00000000},
- {0x0000a2e0, 0x00000000},
- {0x0000a2e4, 0x00000000},
- {0x0000a2e8, 0x00000000},
- {0x0000a2ec, 0x00000000},
- {0x0000a2f0, 0x00000000},
- {0x0000a2f4, 0x00000000},
- {0x0000a2f8, 0x00000000},
- {0x0000a344, 0x00000000},
- {0x0000a34c, 0x00000000},
- {0x0000a350, 0x0000a000},
- {0x0000a364, 0x00000000},
- {0x0000a370, 0x00000000},
- {0x0000a390, 0x00000001},
- {0x0000a394, 0x00000444},
- {0x0000a398, 0x001f0e0f},
- {0x0000a39c, 0x0075393f},
- {0x0000a3a0, 0xb79f6427},
- {0x0000a3a4, 0x00000000},
- {0x0000a3a8, 0xaaaaaaaa},
- {0x0000a3ac, 0x3c466478},
- {0x0000a3c0, 0x20202020},
- {0x0000a3c4, 0x22222220},
- {0x0000a3c8, 0x20200020},
- {0x0000a3cc, 0x20202020},
- {0x0000a3d0, 0x20202020},
- {0x0000a3d4, 0x20202020},
- {0x0000a3d8, 0x20202020},
- {0x0000a3dc, 0x20202020},
- {0x0000a3e0, 0x20202020},
- {0x0000a3e4, 0x20202020},
- {0x0000a3e8, 0x20202020},
- {0x0000a3ec, 0x20202020},
- {0x0000a3f0, 0x00000000},
- {0x0000a3f4, 0x00000006},
- {0x0000a3f8, 0x0cdbd380},
- {0x0000a3fc, 0x000f0f01},
- {0x0000a400, 0x8fa91f01},
- {0x0000a404, 0x00000000},
- {0x0000a408, 0x0e79e5c6},
- {0x0000a40c, 0x00820820},
- {0x0000a414, 0x1ce739ce},
- {0x0000a418, 0x2d0011ce},
- {0x0000a41c, 0x1ce739ce},
- {0x0000a420, 0x000001ce},
- {0x0000a424, 0x1ce739ce},
- {0x0000a428, 0x000001ce},
- {0x0000a42c, 0x1ce739ce},
- {0x0000a430, 0x1ce739ce},
- {0x0000a434, 0x00000000},
- {0x0000a438, 0x00001801},
- {0x0000a43c, 0x00000000},
- {0x0000a440, 0x00000000},
- {0x0000a444, 0x00000000},
- {0x0000a448, 0x04000000},
- {0x0000a44c, 0x00000001},
- {0x0000a450, 0x00010000},
- {0x0000a458, 0x00000000},
- {0x0000a5c4, 0x3fad9d74},
- {0x0000a5c8, 0x0048060a},
- {0x0000a5cc, 0x00000637},
- {0x0000a760, 0x03020100},
- {0x0000a764, 0x09080504},
- {0x0000a768, 0x0d0c0b0a},
- {0x0000a76c, 0x13121110},
- {0x0000a770, 0x31301514},
- {0x0000a774, 0x35343332},
- {0x0000a778, 0x00000036},
- {0x0000a780, 0x00000838},
- {0x0000a7c0, 0x00000000},
- {0x0000a7c4, 0xfffffffc},
- {0x0000a7c8, 0x00000000},
- {0x0000a7cc, 0x00000000},
- {0x0000a7d0, 0x00000000},
- {0x0000a7d4, 0x00000004},
- {0x0000a7dc, 0x00000001},
-};
-
-static const u32 ar9485Modes_high_ob_db_tx_gain_1_0[][5] = {
- /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
- {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
- {0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
- {0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
- {0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
- {0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
- {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
- {0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
- {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
- {0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
- {0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
- {0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
- {0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
- {0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
- {0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
- {0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
- {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
- {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
- {0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
- {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
- {0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
- {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
- {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
- {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
- {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
- {0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
- {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
-};
-
-static const u32 ar9485Common_rx_gain_1_0[][2] = {
- /* Addr allmodes */
- {0x0000a000, 0x00010000},
- {0x0000a004, 0x00030002},
- {0x0000a008, 0x00050004},
- {0x0000a00c, 0x00810080},
- {0x0000a010, 0x01800082},
- {0x0000a014, 0x01820181},
- {0x0000a018, 0x01840183},
- {0x0000a01c, 0x01880185},
- {0x0000a020, 0x018a0189},
- {0x0000a024, 0x02850284},
- {0x0000a028, 0x02890288},
- {0x0000a02c, 0x03850384},
- {0x0000a030, 0x03890388},
- {0x0000a034, 0x038b038a},
- {0x0000a038, 0x038d038c},
- {0x0000a03c, 0x03910390},
- {0x0000a040, 0x03930392},
- {0x0000a044, 0x03950394},
- {0x0000a048, 0x00000396},
- {0x0000a04c, 0x00000000},
- {0x0000a050, 0x00000000},
- {0x0000a054, 0x00000000},
- {0x0000a058, 0x00000000},
- {0x0000a05c, 0x00000000},
- {0x0000a060, 0x00000000},
- {0x0000a064, 0x00000000},
- {0x0000a068, 0x00000000},
- {0x0000a06c, 0x00000000},
- {0x0000a070, 0x00000000},
- {0x0000a074, 0x00000000},
- {0x0000a078, 0x00000000},
- {0x0000a07c, 0x00000000},
- {0x0000a080, 0x28282828},
- {0x0000a084, 0x28282828},
- {0x0000a088, 0x28282828},
- {0x0000a08c, 0x28282828},
- {0x0000a090, 0x28282828},
- {0x0000a094, 0x21212128},
- {0x0000a098, 0x171c1c1c},
- {0x0000a09c, 0x02020212},
- {0x0000a0a0, 0x00000202},
- {0x0000a0a4, 0x00000000},
- {0x0000a0a8, 0x00000000},
- {0x0000a0ac, 0x00000000},
- {0x0000a0b0, 0x00000000},
- {0x0000a0b4, 0x00000000},
- {0x0000a0b8, 0x00000000},
- {0x0000a0bc, 0x00000000},
- {0x0000a0c0, 0x001f0000},
- {0x0000a0c4, 0x111f1100},
- {0x0000a0c8, 0x111d111e},
- {0x0000a0cc, 0x111b111c},
- {0x0000a0d0, 0x22032204},
- {0x0000a0d4, 0x22012202},
- {0x0000a0d8, 0x221f2200},
- {0x0000a0dc, 0x221d221e},
- {0x0000a0e0, 0x33013302},
- {0x0000a0e4, 0x331f3300},
- {0x0000a0e8, 0x4402331e},
- {0x0000a0ec, 0x44004401},
- {0x0000a0f0, 0x441e441f},
- {0x0000a0f4, 0x55015502},
- {0x0000a0f8, 0x551f5500},
- {0x0000a0fc, 0x6602551e},
- {0x0000a100, 0x66006601},
- {0x0000a104, 0x661e661f},
- {0x0000a108, 0x7703661d},
- {0x0000a10c, 0x77017702},
- {0x0000a110, 0x00007700},
- {0x0000a114, 0x00000000},
- {0x0000a118, 0x00000000},
- {0x0000a11c, 0x00000000},
- {0x0000a120, 0x00000000},
- {0x0000a124, 0x00000000},
- {0x0000a128, 0x00000000},
- {0x0000a12c, 0x00000000},
- {0x0000a130, 0x00000000},
- {0x0000a134, 0x00000000},
- {0x0000a138, 0x00000000},
- {0x0000a13c, 0x00000000},
- {0x0000a140, 0x001f0000},
- {0x0000a144, 0x111f1100},
- {0x0000a148, 0x111d111e},
- {0x0000a14c, 0x111b111c},
- {0x0000a150, 0x22032204},
- {0x0000a154, 0x22012202},
- {0x0000a158, 0x221f2200},
- {0x0000a15c, 0x221d221e},
- {0x0000a160, 0x33013302},
- {0x0000a164, 0x331f3300},
- {0x0000a168, 0x4402331e},
- {0x0000a16c, 0x44004401},
- {0x0000a170, 0x441e441f},
- {0x0000a174, 0x55015502},
- {0x0000a178, 0x551f5500},
- {0x0000a17c, 0x6602551e},
- {0x0000a180, 0x66006601},
- {0x0000a184, 0x661e661f},
- {0x0000a188, 0x7703661d},
- {0x0000a18c, 0x77017702},
- {0x0000a190, 0x00007700},
- {0x0000a194, 0x00000000},
- {0x0000a198, 0x00000000},
- {0x0000a19c, 0x00000000},
- {0x0000a1a0, 0x00000000},
- {0x0000a1a4, 0x00000000},
- {0x0000a1a8, 0x00000000},
- {0x0000a1ac, 0x00000000},
- {0x0000a1b0, 0x00000000},
- {0x0000a1b4, 0x00000000},
- {0x0000a1b8, 0x00000000},
- {0x0000a1bc, 0x00000000},
- {0x0000a1c0, 0x00000000},
- {0x0000a1c4, 0x00000000},
- {0x0000a1c8, 0x00000000},
- {0x0000a1cc, 0x00000000},
- {0x0000a1d0, 0x00000000},
- {0x0000a1d4, 0x00000000},
- {0x0000a1d8, 0x00000000},
- {0x0000a1dc, 0x00000000},
- {0x0000a1e0, 0x00000000},
- {0x0000a1e4, 0x00000000},
- {0x0000a1e8, 0x00000000},
- {0x0000a1ec, 0x00000000},
- {0x0000a1f0, 0x00000396},
- {0x0000a1f4, 0x00000396},
- {0x0000a1f8, 0x00000396},
- {0x0000a1fc, 0x00000296},
-};
-
-static const u32 ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x10252e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000580c},
-};
-
-static const u32 ar9485_1_0_pcie_phy_clkreq_enable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x10253e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000580c},
-};
-
-static const u32 ar9485_1_0_soc_preamble[][2] = {
- /* Addr allmodes */
- {0x00004090, 0x00aa10aa},
- {0x000040a4, 0x00a0c9c9},
- {0x00007048, 0x00000004},
-};
-
-static const u32 ar9485_fast_clock_1_0_baseband_postamble[][3] = {
- /* Addr 5G_HT20 5G_HT40 */
- {0x00009e00, 0x03721821, 0x03721821},
- {0x0000a230, 0x0000400b, 0x00004016},
- {0x0000a254, 0x00000898, 0x00001130},
-};
-
-static const u32 ar9485_1_0_baseband_postamble[][5] = {
- /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
- {0x00009820, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e},
- {0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
- {0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
- {0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
- {0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
- {0x00009c00, 0x00000044, 0x00000044, 0x00000044, 0x00000044},
- {0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
- {0x00009e04, 0x00182020, 0x00182020, 0x00182020, 0x00182020},
- {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
- {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e},
- {0x00009e14, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e},
- {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
- {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
- {0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
- {0x00009e44, 0x02321e27, 0x02321e27, 0x02282324, 0x02282324},
- {0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
- {0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
- {0x0000a204, 0x01303fc0, 0x01303fc4, 0x01303fc4, 0x01303fc0},
- {0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
- {0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b},
- {0x0000a234, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff},
- {0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
- {0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108},
- {0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898},
- {0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002},
- {0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e},
- {0x0000a260, 0x3a021501, 0x3a021501, 0x3a021501, 0x3a021501},
- {0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e},
- {0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b},
- {0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
- {0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
- {0x0000a2d0, 0x00071981, 0x00071981, 0x00071981, 0x00071982},
- {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
- {0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000be04, 0x00802020, 0x00802020, 0x00802020, 0x00802020},
- {0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-};
-
-static const u32 ar9485Modes_low_ob_db_tx_gain_1_0[][5] = {
- /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
- {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
- {0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
- {0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
- {0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
- {0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
- {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
- {0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
- {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
- {0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
- {0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
- {0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
- {0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
- {0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
- {0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
- {0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
- {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
- {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
- {0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
- {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
- {0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
- {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
- {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
- {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
- {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
- {0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
- {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
- {0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
-};
-
-static const u32 ar9485_1_0_pcie_phy_clkreq_disable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x10213e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000580c},
-};
-
-static const u32 ar9485_1_0_radio_postamble[][2] = {
- /* Addr allmodes */
- {0x0001609c, 0x0b283f31},
- {0x000160ac, 0x24611800},
- {0x000160b0, 0x03284f3e},
- {0x0001610c, 0x00170000},
- {0x00016140, 0x10804008},
-};
-
-static const u32 ar9485_1_0_mac_core[][2] = {
- /* Addr allmodes */
- {0x00000008, 0x00000000},
- {0x00000030, 0x00020085},
- {0x00000034, 0x00000005},
- {0x00000040, 0x00000000},
- {0x00000044, 0x00000000},
- {0x00000048, 0x00000008},
- {0x0000004c, 0x00000010},
- {0x00000050, 0x00000000},
- {0x00001040, 0x002ffc0f},
- {0x00001044, 0x002ffc0f},
- {0x00001048, 0x002ffc0f},
- {0x0000104c, 0x002ffc0f},
- {0x00001050, 0x002ffc0f},
- {0x00001054, 0x002ffc0f},
- {0x00001058, 0x002ffc0f},
- {0x0000105c, 0x002ffc0f},
- {0x00001060, 0x002ffc0f},
- {0x00001064, 0x002ffc0f},
- {0x000010f0, 0x00000100},
- {0x00001270, 0x00000000},
- {0x000012b0, 0x00000000},
- {0x000012f0, 0x00000000},
- {0x0000143c, 0x00000000},
- {0x0000147c, 0x00000000},
- {0x00008000, 0x00000000},
- {0x00008004, 0x00000000},
- {0x00008008, 0x00000000},
- {0x0000800c, 0x00000000},
- {0x00008018, 0x00000000},
- {0x00008020, 0x00000000},
- {0x00008038, 0x00000000},
- {0x0000803c, 0x00000000},
- {0x00008040, 0x00000000},
- {0x00008044, 0x00000000},
- {0x00008048, 0x00000000},
- {0x0000804c, 0xffffffff},
- {0x00008054, 0x00000000},
- {0x00008058, 0x00000000},
- {0x0000805c, 0x000fc78f},
- {0x00008060, 0x0000000f},
- {0x00008064, 0x00000000},
- {0x00008070, 0x00000310},
- {0x00008074, 0x00000020},
- {0x00008078, 0x00000000},
- {0x0000809c, 0x0000000f},
- {0x000080a0, 0x00000000},
- {0x000080a4, 0x02ff0000},
- {0x000080a8, 0x0e070605},
- {0x000080ac, 0x0000000d},
- {0x000080b0, 0x00000000},
- {0x000080b4, 0x00000000},
- {0x000080b8, 0x00000000},
- {0x000080bc, 0x00000000},
- {0x000080c0, 0x2a800000},
- {0x000080c4, 0x06900168},
- {0x000080c8, 0x13881c20},
- {0x000080cc, 0x01f40000},
- {0x000080d0, 0x00252500},
- {0x000080d4, 0x00a00000},
- {0x000080d8, 0x00400000},
- {0x000080dc, 0x00000000},
- {0x000080e0, 0xffffffff},
- {0x000080e4, 0x0000ffff},
- {0x000080e8, 0x3f3f3f3f},
- {0x000080ec, 0x00000000},
- {0x000080f0, 0x00000000},
- {0x000080f4, 0x00000000},
- {0x000080fc, 0x00020000},
- {0x00008100, 0x00000000},
- {0x00008108, 0x00000052},
- {0x0000810c, 0x00000000},
- {0x00008110, 0x00000000},
- {0x00008114, 0x000007ff},
- {0x00008118, 0x000000aa},
- {0x0000811c, 0x00003210},
- {0x00008124, 0x00000000},
- {0x00008128, 0x00000000},
- {0x0000812c, 0x00000000},
- {0x00008130, 0x00000000},
- {0x00008134, 0x00000000},
- {0x00008138, 0x00000000},
- {0x0000813c, 0x0000ffff},
- {0x00008144, 0xffffffff},
- {0x00008168, 0x00000000},
- {0x0000816c, 0x00000000},
- {0x00008170, 0x18486200},
- {0x00008174, 0x33332210},
- {0x00008178, 0x00000000},
- {0x0000817c, 0x00020000},
- {0x000081c0, 0x00000000},
- {0x000081c4, 0x33332210},
- {0x000081c8, 0x00000000},
- {0x000081cc, 0x00000000},
- {0x000081d4, 0x00000000},
- {0x000081ec, 0x00000000},
- {0x000081f0, 0x00000000},
- {0x000081f4, 0x00000000},
- {0x000081f8, 0x00000000},
- {0x000081fc, 0x00000000},
- {0x00008240, 0x00100000},
- {0x00008244, 0x0010f400},
- {0x00008248, 0x00000800},
- {0x0000824c, 0x0001e800},
- {0x00008250, 0x00000000},
- {0x00008254, 0x00000000},
- {0x00008258, 0x00000000},
- {0x0000825c, 0x40000000},
- {0x00008260, 0x00080922},
- {0x00008264, 0x9ca00010},
- {0x00008268, 0xffffffff},
- {0x0000826c, 0x0000ffff},
- {0x00008270, 0x00000000},
- {0x00008274, 0x40000000},
- {0x00008278, 0x003e4180},
- {0x0000827c, 0x00000004},
- {0x00008284, 0x0000002c},
- {0x00008288, 0x0000002c},
- {0x0000828c, 0x000000ff},
- {0x00008294, 0x00000000},
- {0x00008298, 0x00000000},
- {0x0000829c, 0x00000000},
- {0x00008300, 0x00000140},
- {0x00008314, 0x00000000},
- {0x0000831c, 0x0000010d},
- {0x00008328, 0x00000000},
- {0x0000832c, 0x00000007},
- {0x00008330, 0x00000302},
- {0x00008334, 0x00000700},
- {0x00008338, 0x00ff0000},
- {0x0000833c, 0x02400000},
- {0x00008340, 0x000107ff},
- {0x00008344, 0xa248105b},
- {0x00008348, 0x008f0000},
- {0x0000835c, 0x00000000},
- {0x00008360, 0xffffffff},
- {0x00008364, 0xffffffff},
- {0x00008368, 0x00000000},
- {0x00008370, 0x00000000},
- {0x00008374, 0x000000ff},
- {0x00008378, 0x00000000},
- {0x0000837c, 0x00000000},
- {0x00008380, 0xffffffff},
- {0x00008384, 0xffffffff},
- {0x00008390, 0xffffffff},
- {0x00008394, 0xffffffff},
- {0x00008398, 0x00000000},
- {0x0000839c, 0x00000000},
- {0x000083a0, 0x00000000},
- {0x000083a4, 0x0000fa14},
- {0x000083a8, 0x000f0c00},
- {0x000083ac, 0x33332210},
- {0x000083b0, 0x33332210},
- {0x000083b4, 0x33332210},
- {0x000083b8, 0x33332210},
- {0x000083bc, 0x00000000},
- {0x000083c0, 0x00000000},
- {0x000083c4, 0x00000000},
- {0x000083c8, 0x00000000},
- {0x000083cc, 0x00000200},
- {0x000083d0, 0x000301ff},
-};
-
static const u32 ar9485_1_1_mac_core[][2] = {
/* Addr allmodes */
{0x00000008, 0x00000000},
@@ -1321,7 +396,7 @@
{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001eeb, 0x5a001eeb},
+ {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
@@ -1394,7 +469,7 @@
{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001eeb, 0x5a001eeb},
+ {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
@@ -1560,7 +635,7 @@
{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001eeb, 0x5a001eeb},
+ {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
@@ -1653,7 +728,7 @@
{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001eeb, 0x5a001eeb},
+ {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
@@ -1752,7 +827,7 @@
{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
- {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001eeb, 0x5a001eeb},
+ {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 099bd41..03b37d7 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -62,7 +62,6 @@
#define ATH_TXQ_SETUP(sc, i) ((sc)->tx.txqsetup & (1<<i))
struct ath_config {
- u32 ath_aggr_prot;
u16 txpowlimit;
u8 cabqReadytime;
};
@@ -120,13 +119,11 @@
/* RX / TX */
/***********/
-#define ATH_MAX_ANTENNA 3
#define ATH_RXBUF 512
#define ATH_TXBUF 512
#define ATH_TXBUF_RESERVE 5
#define ATH_MAX_QDEPTH (ATH_TXBUF / 4 - ATH_TXBUF_RESERVE)
#define ATH_TXMAXTRY 13
-#define ATH_MGT_TXMAXTRY 4
#define TID_TO_WME_AC(_tid) \
((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \
@@ -202,6 +199,7 @@
int sched;
struct list_head list;
struct list_head tid_q;
+ bool clear_ps_filter;
};
struct ath_frame_info {
@@ -257,8 +255,12 @@
#endif
struct ath_atx_tid tid[WME_NUM_TID];
struct ath_atx_ac ac[WME_NUM_AC];
+ int ps_key;
+
u16 maxampdu;
u8 mpdudensity;
+
+ bool sleeping;
};
#define AGGR_CLEANUP BIT(1)
@@ -340,17 +342,18 @@
void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
+void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an);
+bool ath_tx_aggr_sleep(struct ath_softc *sc, struct ath_node *an);
+
/********/
/* VIFs */
/********/
struct ath_vif {
int av_bslot;
- bool is_bslot_active;
+ bool is_bslot_active, primary_sta_vif;
__le64 tsf_adjust; /* TSF adjustment for staggered beacons */
- enum nl80211_iftype av_opmode;
struct ath_buf *av_bcbuf;
- u8 bssid[ETH_ALEN]; /* current BSSID from config_interface */
};
/*******************/
@@ -362,7 +365,7 @@
* number of BSSIDs) if a given beacon does not go out even after waiting this
* number of beacon intervals, the game's up.
*/
-#define BSTUCK_THRESH (9 * ATH_BCBUF)
+#define BSTUCK_THRESH 9
#define ATH_BCBUF 4
#define ATH_DEFAULT_BINTVAL 100 /* TU */
#define ATH_DEFAULT_BMISS_LIMIT 10
@@ -386,7 +389,7 @@
u32 beaconq;
u32 bmisscnt;
u32 ast_be_xmit;
- u64 bc_tstamp;
+ u32 bc_tstamp;
struct ieee80211_vif *bslot[ATH_BCBUF];
int slottime;
int slotupdate;
@@ -401,6 +404,7 @@
int ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp);
int ath_beaconq_config(struct ath_softc *sc);
+void ath_set_beacon(struct ath_softc *sc);
void ath9k_set_beaconing_status(struct ath_softc *sc, bool status);
/*******/
@@ -418,6 +422,7 @@
#define ATH_PAPRD_TIMEOUT 100 /* msecs */
void ath_hw_check(struct work_struct *work);
+void ath_hw_pll_work(struct work_struct *work);
void ath_paprd_calibrate(struct work_struct *work);
void ath_ani_calibrate(unsigned long data);
@@ -448,6 +453,7 @@
#define ATH_LED_PIN_DEF 1
#define ATH_LED_PIN_9287 8
+#define ATH_LED_PIN_9300 10
#define ATH_LED_PIN_9485 6
#ifdef CONFIG_MAC80211_LEDS
@@ -477,7 +483,6 @@
#define ATH_ANT_DIV_COMB_ALT_ANT_RATIO 30
#define ATH_ANT_DIV_COMB_ALT_ANT_RATIO2 20
-#define ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA -3
#define ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA -1
#define ATH_ANT_DIV_COMB_LNA1_DELTA_HI -4
#define ATH_ANT_DIV_COMB_LNA1_DELTA_MID -2
@@ -550,6 +555,7 @@
#define SC_OP_BT_SCAN BIT(13)
#define SC_OP_ANI_RUN BIT(14)
#define SC_OP_ENABLE_APM BIT(15)
+#define SC_OP_PRIM_STA_VIF BIT(16)
/* Powersave flags */
#define PS_WAIT_FOR_BEACON BIT(0)
@@ -557,6 +563,7 @@
#define PS_WAIT_FOR_PSPOLL_DATA BIT(2)
#define PS_WAIT_FOR_TX_ACK BIT(3)
#define PS_BEACON_SYNC BIT(4)
+#define PS_TSFOOR_SYNC BIT(5)
struct ath_rate_table;
@@ -667,7 +674,7 @@
bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode);
bool ath9k_uses_beacons(int type);
-#ifdef CONFIG_PCI
+#ifdef CONFIG_ATH9K_PCI
int ath_pci_init(void);
void ath_pci_exit(void);
#else
@@ -675,7 +682,7 @@
static inline void ath_pci_exit(void) {};
#endif
-#ifdef CONFIG_ATHEROS_AR71XX
+#ifdef CONFIG_ATH9K_AHB
int ath_ahb_init(void);
void ath_ahb_exit(void);
#else
@@ -688,8 +695,6 @@
u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate);
-void ath9k_set_bssid_mask(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
-
void ath_start_rfkill_poll(struct ath_softc *sc);
extern void ath9k_rfkill_poll_state(struct ieee80211_hw *hw);
void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 6d2a545f..637dbc5 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -57,8 +57,8 @@
/*
* Associates the beacon frame buffer with a transmit descriptor. Will set
- * up all required antenna switch parameters, rate codes, and channel flags.
- * Beacons are always sent out at the lowest rate, and are not retried.
+ * up rate codes, and channel flags. Beacons are always sent out at the
+ * lowest rate, and are not retried.
*/
static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
struct ath_buf *bf, int rateidx)
@@ -68,7 +68,7 @@
struct ath_common *common = ath9k_hw_common(ah);
struct ath_desc *ds;
struct ath9k_11n_rate_series series[4];
- int flags, antenna, ctsrate = 0, ctsduration = 0;
+ int flags, ctsrate = 0, ctsduration = 0;
struct ieee80211_supported_band *sband;
u8 rate = 0;
@@ -76,12 +76,6 @@
flags = ATH9K_TXDESC_NOACK;
ds->ds_link = 0;
- /*
- * Switch antenna every beacon.
- * Should only switch every beacon period, not for every SWBA
- * XXX assumes two antennae
- */
- antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs) & 1 ? 2 : 1);
sband = &sc->sbands[common->hw->conf.channel->band];
rate = sband->bitrates[rateidx].hw_value;
@@ -278,7 +272,7 @@
return -ENOMEM;
tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
- sc->beacon.bc_tstamp = le64_to_cpu(tstamp);
+ sc->beacon.bc_tstamp = (u32) le64_to_cpu(tstamp);
/* Calculate a TSF adjustment factor required for staggered beacons. */
if (avp->av_bslot > 0) {
u64 tsfadjust;
@@ -294,8 +288,8 @@
* adjustment. Other slots are adjusted to get the timestamp
* close to the TBTT for the BSS.
*/
- tsfadjust = intval * avp->av_bslot / ATH_BCBUF;
- avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
+ tsfadjust = TU_TO_USEC(intval * avp->av_bslot) / ATH_BCBUF;
+ avp->tsf_adjust = cpu_to_le64(tsfadjust);
ath_dbg(common, ATH_DBG_BEACON,
"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
@@ -326,9 +320,11 @@
if (avp->av_bcbuf != NULL) {
struct ath_buf *bf;
+ avp->is_bslot_active = false;
if (avp->av_bslot != -1) {
sc->beacon.bslot[avp->av_bslot] = NULL;
sc->nbcnvifs--;
+ avp->av_bslot = -1;
}
bf = avp->av_bcbuf;
@@ -369,12 +365,13 @@
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
sc->beacon.bmisscnt++;
- if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
+ if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
ath_dbg(common, ATH_DBG_BSTUCK,
"missed %u consecutive beacons\n",
sc->beacon.bmisscnt);
ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
- ath9k_hw_bstuck_nfcal(ah);
+ if (sc->beacon.bmisscnt > 3)
+ ath9k_hw_bstuck_nfcal(ah);
} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
ath_dbg(common, ATH_DBG_BSTUCK,
"beacon is officially stuck\n");
@@ -385,13 +382,6 @@
return;
}
- if (sc->beacon.bmisscnt != 0) {
- ath_dbg(common, ATH_DBG_BSTUCK,
- "resume beacon xmit after %u misses\n",
- sc->beacon.bmisscnt);
- sc->beacon.bmisscnt = 0;
- }
-
/*
* Generate beacon frames. we are sending frames
* staggered so calculate the slot for this frame based
@@ -401,21 +391,14 @@
intval = cur_conf->beacon_interval ? : ATH_DEFAULT_BINTVAL;
tsf = ath9k_hw_gettsf64(ah);
- tsftu = TSF_TO_TU(tsf>>32, tsf);
- slot = ((tsftu % intval) * ATH_BCBUF) / intval;
- /*
- * Reverse the slot order to get slot 0 on the TBTT offset that does
- * not require TSF adjustment and other slots adding
- * slot/ATH_BCBUF * beacon_int to timestamp. For example, with
- * ATH_BCBUF = 4, we process beacon slots as follows: 3 2 1 0 3 2 1 ..
- * and slot 0 is at correct offset to TBTT.
- */
- slot = ATH_BCBUF - slot - 1;
+ tsf += TU_TO_USEC(ah->config.sw_beacon_response_time);
+ tsftu = TSF_TO_TU((tsf * ATH_BCBUF) >>32, tsf * ATH_BCBUF);
+ slot = (tsftu % (intval * ATH_BCBUF)) / intval;
vif = sc->beacon.bslot[slot];
ath_dbg(common, ATH_DBG_BEACON,
"slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
- slot, tsf, tsftu, intval, vif);
+ slot, tsf, tsftu / ATH_BCBUF, intval, vif);
bfaddr = 0;
if (vif) {
@@ -424,6 +407,13 @@
bfaddr = bf->bf_daddr;
bc = 1;
}
+
+ if (sc->beacon.bmisscnt != 0) {
+ ath_dbg(common, ATH_DBG_BSTUCK,
+ "resume beacon xmit after %u misses\n",
+ sc->beacon.bmisscnt);
+ sc->beacon.bmisscnt = 0;
+ }
}
/*
@@ -463,13 +453,17 @@
u32 next_beacon,
u32 beacon_period)
{
- if (beacon_period & ATH9K_BEACON_RESET_TSF)
+ if (sc->sc_flags & SC_OP_TSF_RESET) {
ath9k_ps_wakeup(sc);
+ ath9k_hw_reset_tsf(sc->sc_ah);
+ }
ath9k_hw_beaconinit(sc->sc_ah, next_beacon, beacon_period);
- if (beacon_period & ATH9K_BEACON_RESET_TSF)
+ if (sc->sc_flags & SC_OP_TSF_RESET) {
ath9k_ps_restore(sc);
+ sc->sc_flags &= ~SC_OP_TSF_RESET;
+ }
}
/*
@@ -484,18 +478,14 @@
u32 nexttbtt, intval;
/* NB: the beacon interval is kept internally in TU's */
- intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+ intval = TU_TO_USEC(conf->beacon_interval & ATH9K_BEACON_PERIOD);
intval /= ATH_BCBUF; /* for staggered beacons */
nexttbtt = intval;
- if (sc->sc_flags & SC_OP_TSF_RESET)
- intval |= ATH9K_BEACON_RESET_TSF;
-
/*
* In AP mode we enable the beacon timers and SWBA interrupts to
* prepare beacon frames.
*/
- intval |= ATH9K_BEACON_ENA;
ah->imask |= ATH9K_INT_SWBA;
ath_beaconq_config(sc);
@@ -505,11 +495,6 @@
ath9k_beacon_init(sc, nexttbtt, intval);
sc->beacon.bmisscnt = 0;
ath9k_hw_set_interrupts(ah, ah->imask);
-
- /* Clear the reset TSF flag, so that subsequent beacon updation
- will not reset the HW TSF. */
-
- sc->sc_flags &= ~SC_OP_TSF_RESET;
}
/*
@@ -635,7 +620,13 @@
ath9k_hw_disable_interrupts(ah);
ath9k_hw_set_sta_beacon_timers(ah, &bs);
ah->imask |= ATH9K_INT_BMISS;
- ath9k_hw_set_interrupts(ah, ah->imask);
+
+ /*
+ * If the beacon config is called beacause of TSFOOR,
+ * Interrupts will be enabled back at the end of ath9k_tasklet
+ */
+ if (!(sc->ps_flags & PS_TSFOOR_SYNC))
+ ath9k_hw_set_interrupts(ah, ah->imask);
}
static void ath_beacon_config_adhoc(struct ath_softc *sc,
@@ -643,25 +634,20 @@
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- u64 tsf;
- u32 tsftu, intval, nexttbtt;
+ u32 tsf, delta, intval, nexttbtt;
- intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+ tsf = ath9k_hw_gettsf32(ah) + TU_TO_USEC(FUDGE);
+ intval = TU_TO_USEC(conf->beacon_interval & ATH9K_BEACON_PERIOD);
-
- /* Pull nexttbtt forward to reflect the current TSF */
-
- nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
- if (nexttbtt == 0)
- nexttbtt = intval;
- else if (intval)
- nexttbtt = roundup(nexttbtt, intval);
-
- tsf = ath9k_hw_gettsf64(ah);
- tsftu = TSF_TO_TU((u32)(tsf>>32), (u32)tsf) + FUDGE;
- do {
- nexttbtt += intval;
- } while (nexttbtt < tsftu);
+ if (!sc->beacon.bc_tstamp)
+ nexttbtt = tsf + intval;
+ else {
+ if (tsf > sc->beacon.bc_tstamp)
+ delta = (tsf - sc->beacon.bc_tstamp);
+ else
+ delta = (tsf + 1 + (~0U - sc->beacon.bc_tstamp));
+ nexttbtt = tsf + roundup(delta, intval);
+ }
ath_dbg(common, ATH_DBG_BEACON,
"IBSS nexttbtt %u intval %u (%u)\n",
@@ -672,7 +658,6 @@
* if we need to manually prepare beacon frames. Otherwise we use a
* self-linked tx descriptor and let the hardware deal with things.
*/
- intval |= ATH9K_BEACON_ENA;
ah->imask |= ATH9K_INT_SWBA;
ath_beaconq_config(sc);
@@ -682,25 +667,71 @@
ath9k_hw_disable_interrupts(ah);
ath9k_beacon_init(sc, nexttbtt, intval);
sc->beacon.bmisscnt = 0;
- ath9k_hw_set_interrupts(ah, ah->imask);
+ /*
+ * If the beacon config is called beacause of TSFOOR,
+ * Interrupts will be enabled back at the end of ath9k_tasklet
+ */
+ if (!(sc->ps_flags & PS_TSFOOR_SYNC))
+ ath9k_hw_set_interrupts(ah, ah->imask);
+}
+
+static bool ath9k_allow_beacon_config(struct ath_softc *sc,
+ struct ieee80211_vif *vif)
+{
+ struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+ struct ath_vif *avp = (void *)vif->drv_priv;
+
+ /*
+ * Can not have different beacon interval on multiple
+ * AP interface case
+ */
+ if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
+ (sc->nbcnvifs > 1) &&
+ (vif->type == NL80211_IFTYPE_AP) &&
+ (cur_conf->beacon_interval != bss_conf->beacon_int)) {
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Changing beacon interval of multiple \
+ AP interfaces !\n");
+ return false;
+ }
+ /*
+ * Can not configure station vif's beacon config
+ * while on AP opmode
+ */
+ if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
+ (vif->type != NL80211_IFTYPE_AP)) {
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "STA vif's beacon not allowed on AP mode\n");
+ return false;
+ }
+ /*
+ * Do not allow beacon config if HW was already configured
+ * with another STA vif
+ */
+ if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
+ (vif->type == NL80211_IFTYPE_STATION) &&
+ (sc->sc_flags & SC_OP_BEACONS) &&
+ !avp->primary_sta_vif) {
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Beacon already configured for a station interface\n");
+ return false;
+ }
+ return true;
}
void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
{
struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- enum nl80211_iftype iftype;
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+
+ if (!ath9k_allow_beacon_config(sc, vif))
+ return;
/* Setup the beacon configuration parameters */
- if (vif) {
- struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
- iftype = vif->type;
- cur_conf->beacon_interval = bss_conf->beacon_int;
- cur_conf->dtim_period = bss_conf->dtim_period;
- } else {
- iftype = sc->sc_ah->opmode;
- }
-
+ cur_conf->beacon_interval = bss_conf->beacon_int;
+ cur_conf->dtim_period = bss_conf->dtim_period;
cur_conf->listen_interval = 1;
cur_conf->dtim_count = 1;
cur_conf->bmiss_timeout =
@@ -723,9 +754,37 @@
if (cur_conf->dtim_period == 0)
cur_conf->dtim_period = 1;
- switch (iftype) {
+ ath_set_beacon(sc);
+}
+
+static bool ath_has_valid_bslot(struct ath_softc *sc)
+{
+ struct ath_vif *avp;
+ int slot;
+ bool found = false;
+
+ for (slot = 0; slot < ATH_BCBUF; slot++) {
+ if (sc->beacon.bslot[slot]) {
+ avp = (void *)sc->beacon.bslot[slot]->drv_priv;
+ if (avp->is_bslot_active) {
+ found = true;
+ break;
+ }
+ }
+ }
+ return found;
+}
+
+
+void ath_set_beacon(struct ath_softc *sc)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+
+ switch (sc->sc_ah->opmode) {
case NL80211_IFTYPE_AP:
- ath_beacon_config_ap(sc, cur_conf);
+ if (ath_has_valid_bslot(sc))
+ ath_beacon_config_ap(sc, cur_conf);
break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
@@ -746,26 +805,15 @@
void ath9k_set_beaconing_status(struct ath_softc *sc, bool status)
{
struct ath_hw *ah = sc->sc_ah;
- struct ath_vif *avp;
- int slot;
- bool found = false;
+
+ if (!ath_has_valid_bslot(sc))
+ return;
ath9k_ps_wakeup(sc);
if (status) {
- for (slot = 0; slot < ATH_BCBUF; slot++) {
- if (sc->beacon.bslot[slot]) {
- avp = (void *)sc->beacon.bslot[slot]->drv_priv;
- if (avp->is_bslot_active) {
- found = true;
- break;
- }
- }
- }
- if (found) {
- /* Re-enable beaconing */
- ah->imask |= ATH9K_INT_SWBA;
- ath9k_hw_set_interrupts(ah, ah->imask);
- }
+ /* Re-enable beaconing */
+ ah->imask |= ATH9K_INT_SWBA;
+ ath9k_hw_set_interrupts(ah, ah->imask);
} else {
/* Disable SWBA interrupt */
ah->imask &= ~ATH9K_INT_SWBA;
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index d33bf20..23f15a7 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -51,6 +51,10 @@
.bt_hold_rx_clear = true,
};
u32 i;
+ bool rxclear_polarity = ath_bt_config.bt_rxclear_polarity;
+
+ if (AR_SREV_9300_20_OR_LATER(ah))
+ rxclear_polarity = !ath_bt_config.bt_rxclear_polarity;
btcoex_hw->bt_coex_mode =
(btcoex_hw->bt_coex_mode & AR_BT_QCU_THRESH) |
@@ -59,7 +63,7 @@
SM(ath_bt_config.bt_txframe_extend, AR_BT_TX_FRAME_EXTEND) |
SM(ath_bt_config.bt_mode, AR_BT_MODE) |
SM(ath_bt_config.bt_quiet_collision, AR_BT_QUIET) |
- SM(ath_bt_config.bt_rxclear_polarity, AR_BT_RX_CLEAR_POLARITY) |
+ SM(rxclear_polarity, AR_BT_RX_CLEAR_POLARITY) |
SM(ath_bt_config.bt_priority_time, AR_BT_PRIORITY_TIME) |
SM(ath_bt_config.bt_first_slot_time, AR_BT_FIRST_SLOT_TIME) |
SM(qnum, AR_BT_QCU_THRESH);
@@ -142,6 +146,7 @@
}
EXPORT_SYMBOL(ath9k_hw_btcoex_set_weight);
+
static void ath9k_hw_btcoex_enable_3wire(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
@@ -152,9 +157,22 @@
* enable coex 3-wire
*/
REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_hw->bt_coex_mode);
- REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_hw->bt_coex_weights);
REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_hw->bt_coex_mode2);
+
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
+ REG_WRITE(ah, AR_BT_COEX_WL_WEIGHTS0, ah->bt_coex_wlan_weight[0]);
+ REG_WRITE(ah, AR_BT_COEX_WL_WEIGHTS1, ah->bt_coex_wlan_weight[1]);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS0, ah->bt_coex_bt_weight[0]);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS1, ah->bt_coex_bt_weight[1]);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS2, ah->bt_coex_bt_weight[2]);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS3, ah->bt_coex_bt_weight[3]);
+
+ } else
+ REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_hw->bt_coex_weights);
+
+
+
if (AR_SREV_9271(ah)) {
val = REG_READ(ah, 0x50040);
val &= 0xFFFFFEFF;
@@ -202,10 +220,86 @@
if (btcoex_hw->scheme == ATH_BTCOEX_CFG_3WIRE) {
REG_WRITE(ah, AR_BT_COEX_MODE, AR_BT_QUIET | AR_BT_MODE);
- REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0);
REG_WRITE(ah, AR_BT_COEX_MODE2, 0);
+
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
+ REG_WRITE(ah, AR_BT_COEX_WL_WEIGHTS0, 0);
+ REG_WRITE(ah, AR_BT_COEX_WL_WEIGHTS1, 0);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS0, 0);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS1, 0);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS2, 0);
+ REG_WRITE(ah, AR_BT_COEX_BT_WEIGHTS3, 0);
+ } else
+ REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0);
+
}
ah->btcoex_hw.enabled = false;
}
EXPORT_SYMBOL(ath9k_hw_btcoex_disable);
+
+static void ar9003_btcoex_bt_stomp(struct ath_hw *ah,
+ enum ath_stomp_type stomp_type)
+{
+ ah->bt_coex_bt_weight[0] = AR9300_BT_WGHT;
+ ah->bt_coex_bt_weight[1] = AR9300_BT_WGHT;
+ ah->bt_coex_bt_weight[2] = AR9300_BT_WGHT;
+ ah->bt_coex_bt_weight[3] = AR9300_BT_WGHT;
+
+
+ switch (stomp_type) {
+ case ATH_BTCOEX_STOMP_ALL:
+ ah->bt_coex_wlan_weight[0] = AR9300_STOMP_ALL_WLAN_WGHT0;
+ ah->bt_coex_wlan_weight[1] = AR9300_STOMP_ALL_WLAN_WGHT1;
+ break;
+ case ATH_BTCOEX_STOMP_LOW:
+ ah->bt_coex_wlan_weight[0] = AR9300_STOMP_LOW_WLAN_WGHT0;
+ ah->bt_coex_wlan_weight[1] = AR9300_STOMP_LOW_WLAN_WGHT1;
+ break;
+ case ATH_BTCOEX_STOMP_NONE:
+ ah->bt_coex_wlan_weight[0] = AR9300_STOMP_NONE_WLAN_WGHT0;
+ ah->bt_coex_wlan_weight[1] = AR9300_STOMP_NONE_WLAN_WGHT1;
+ break;
+
+ default:
+ ath_dbg(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+ "Invalid Stomptype\n");
+ break;
+ }
+
+ ath9k_hw_btcoex_enable(ah);
+}
+
+/*
+ * Configures appropriate weight based on stomp type.
+ */
+void ath9k_hw_btcoex_bt_stomp(struct ath_hw *ah,
+ enum ath_stomp_type stomp_type)
+{
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
+ ar9003_btcoex_bt_stomp(ah, stomp_type);
+ return;
+ }
+
+ switch (stomp_type) {
+ case ATH_BTCOEX_STOMP_ALL:
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_ALL_WLAN_WGHT);
+ break;
+ case ATH_BTCOEX_STOMP_LOW:
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_LOW_WLAN_WGHT);
+ break;
+ case ATH_BTCOEX_STOMP_NONE:
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_NONE_WLAN_WGHT);
+ break;
+ default:
+ ath_dbg(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+ "Invalid Stomptype\n");
+ break;
+ }
+
+ ath9k_hw_btcoex_enable(ah);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_bt_stomp);
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 588dfd4..a9efca8 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -19,9 +19,13 @@
#include "hw.h"
-#define ATH_WLANACTIVE_GPIO 5
-#define ATH_BTACTIVE_GPIO 6
-#define ATH_BTPRIORITY_GPIO 7
+#define ATH_WLANACTIVE_GPIO_9280 5
+#define ATH_BTACTIVE_GPIO_9280 6
+#define ATH_BTPRIORITY_GPIO_9285 7
+
+#define ATH_WLANACTIVE_GPIO_9300 5
+#define ATH_BTACTIVE_GPIO_9300 4
+#define ATH_BTPRIORITY_GPIO_9300 8
#define ATH_BTCOEX_DEF_BT_PERIOD 45
#define ATH_BTCOEX_DEF_DUTY_CYCLE 55
@@ -32,6 +36,14 @@
#define ATH_BT_CNT_THRESHOLD 3
#define ATH_BT_CNT_SCAN_THRESHOLD 15
+/* Defines the BT AR_BT_COEX_WGHT used */
+enum ath_stomp_type {
+ ATH_BTCOEX_NO_STOMP,
+ ATH_BTCOEX_STOMP_ALL,
+ ATH_BTCOEX_STOMP_LOW,
+ ATH_BTCOEX_STOMP_NONE
+};
+
enum ath_btcoex_scheme {
ATH_BTCOEX_CFG_NONE,
ATH_BTCOEX_CFG_2WIRE,
@@ -57,5 +69,7 @@
u32 wlan_weight);
void ath9k_hw_btcoex_enable(struct ath_hw *ah);
void ath9k_hw_btcoex_disable(struct ath_hw *ah);
+void ath9k_hw_btcoex_bt_stomp(struct ath_hw *ah,
+ enum ath_stomp_type stomp_type);
#endif
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 8649581..558b228 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -69,15 +69,21 @@
int16_t *nfarray)
{
struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_conf *conf = &common->hw->conf;
struct ath_nf_limits *limit;
struct ath9k_nfcal_hist *h;
bool high_nf_mid = false;
+ u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
int i;
h = cal->nfCalHist;
limit = ath9k_hw_get_nf_limits(ah, ah->curchan);
for (i = 0; i < NUM_NF_READINGS; i++) {
+ if (!(chainmask & (1 << i)) ||
+ ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)))
+ continue;
+
h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX)
@@ -225,6 +231,7 @@
int32_t val;
u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_conf *conf = &common->hw->conf;
s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
if (ah->caldata)
@@ -234,6 +241,9 @@
if (chainmask & (1 << i)) {
s16 nfval;
+ if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))
+ continue;
+
if (h)
nfval = h[i].privNF;
else
@@ -293,6 +303,9 @@
ENABLE_REGWRITE_BUFFER(ah);
for (i = 0; i < NUM_NF_READINGS; i++) {
if (chainmask & (1 << i)) {
+ if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))
+ continue;
+
val = REG_READ(ah, ah->nf_regs[i]);
val &= 0xFFFFFE00;
val |= (((u32) (-50) << 1) & 0x1ff);
@@ -396,14 +409,6 @@
}
}
-s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
-{
- if (!ah->curchan || !ah->curchan->noisefloor)
- return ath9k_hw_get_default_nf(ah, chan);
-
- return ah->curchan->noisefloor;
-}
-EXPORT_SYMBOL(ath9k_hw_getchan_noise);
void ath9k_hw_bstuck_nfcal(struct ath_hw *ah)
{
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index b8973eb..4420780 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -106,7 +106,6 @@
void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
struct ath9k_channel *chan);
void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
-s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_hw_reset_calibration(struct ath_hw *ah,
struct ath9k_cal_list *currCal);
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 615e682..74535e6 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -116,7 +116,7 @@
if (chan->band == IEEE80211_BAND_2GHZ) {
ichan->chanmode = CHANNEL_G;
- ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
+ ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
} else {
ichan->chanmode = CHANNEL_A;
ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
@@ -158,37 +158,6 @@
}
EXPORT_SYMBOL(ath9k_cmn_count_streams);
-/*
- * Configures appropriate weight based on stomp type.
- */
-void ath9k_cmn_btcoex_bt_stomp(struct ath_common *common,
- enum ath_stomp_type stomp_type)
-{
- struct ath_hw *ah = common->ah;
-
- switch (stomp_type) {
- case ATH_BTCOEX_STOMP_ALL:
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_ALL_WLAN_WGHT);
- break;
- case ATH_BTCOEX_STOMP_LOW:
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_LOW_WLAN_WGHT);
- break;
- case ATH_BTCOEX_STOMP_NONE:
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_NONE_WLAN_WGHT);
- break;
- default:
- ath_dbg(common, ATH_DBG_BTCOEX,
- "Invalid Stomptype\n");
- break;
- }
-
- ath9k_hw_btcoex_enable(ah);
-}
-EXPORT_SYMBOL(ath9k_cmn_btcoex_bt_stomp);
-
void ath9k_cmn_update_txpow(struct ath_hw *ah, u16 cur_txpow,
u16 new_txpow, u16 *txpower)
{
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index b2f7b5f..5124f14 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -50,14 +50,6 @@
#define ATH_EP_RND(x, mul) \
((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
-/* Defines the BT AR_BT_COEX_WGHT used */
-enum ath_stomp_type {
- ATH_BTCOEX_NO_STOMP,
- ATH_BTCOEX_STOMP_ALL,
- ATH_BTCOEX_STOMP_LOW,
- ATH_BTCOEX_STOMP_NONE
-};
-
int ath9k_cmn_padpos(__le16 frame_control);
int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 8df5a92..bad1a87 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -326,6 +326,8 @@
sc->debug.stats.istats.dtimsync++;
if (status & ATH9K_INT_DTIM)
sc->debug.stats.istats.dtim++;
+ if (status & ATH9K_INT_TSFOOR)
+ sc->debug.stats.istats.tsfoor++;
}
static ssize_t read_file_interrupt(struct file *file, char __user *user_buf,
@@ -380,8 +382,11 @@
len += snprintf(buf + len, sizeof(buf) - len,
"%8s: %10u\n", "DTIM", sc->debug.stats.istats.dtim);
len += snprintf(buf + len, sizeof(buf) - len,
+ "%8s: %10u\n", "TSFOOR", sc->debug.stats.istats.tsfoor);
+ len += snprintf(buf + len, sizeof(buf) - len,
"%8s: %10u\n", "TOTAL", sc->debug.stats.istats.total);
+
if (len > sizeof(buf))
len = sizeof(buf);
@@ -845,7 +850,7 @@
struct ath_softc *sc = file->private_data;
char *buf;
- unsigned int len = 0, size = 1152;
+ unsigned int len = 0, size = 1400;
ssize_t retval = 0;
buf = kzalloc(size, GFP_KERNEL);
@@ -874,6 +879,34 @@
"%18s : %10u\n", "DECRYPT BUSY ERR",
sc->debug.stats.rxstats.decrypt_busy_err);
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "RSSI-CTL0",
+ sc->debug.stats.rxstats.rs_rssi_ctl0);
+
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "RSSI-CTL1",
+ sc->debug.stats.rxstats.rs_rssi_ctl1);
+
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "RSSI-CTL2",
+ sc->debug.stats.rxstats.rs_rssi_ctl2);
+
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "RSSI-EXT0",
+ sc->debug.stats.rxstats.rs_rssi_ext0);
+
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "RSSI-EXT1",
+ sc->debug.stats.rxstats.rs_rssi_ext1);
+
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "RSSI-EXT2",
+ sc->debug.stats.rxstats.rs_rssi_ext2);
+
+ len += snprintf(buf + len, size - len,
+ "%18s : %10d\n", "Rx Antenna",
+ sc->debug.stats.rxstats.rs_antenna);
+
PHY_ERR("UNDERRUN", ATH9K_PHYERR_UNDERRUN);
PHY_ERR("TIMING", ATH9K_PHYERR_TIMING);
PHY_ERR("PARITY", ATH9K_PHYERR_PARITY);
@@ -948,6 +981,16 @@
RX_PHY_ERR_INC(phyerr);
}
+ sc->debug.stats.rxstats.rs_rssi_ctl0 = rs->rs_rssi_ctl0;
+ sc->debug.stats.rxstats.rs_rssi_ctl1 = rs->rs_rssi_ctl1;
+ sc->debug.stats.rxstats.rs_rssi_ctl2 = rs->rs_rssi_ctl2;
+
+ sc->debug.stats.rxstats.rs_rssi_ext0 = rs->rs_rssi_ext0;
+ sc->debug.stats.rxstats.rs_rssi_ext1 = rs->rs_rssi_ext1;
+ sc->debug.stats.rxstats.rs_rssi_ext2 = rs->rs_rssi_ext2;
+
+ sc->debug.stats.rxstats.rs_antenna = rs->rs_antenna;
+
#undef RX_STAT_INC
#undef RX_PHY_ERR_INC
}
@@ -1088,67 +1131,43 @@
return -ENOMEM;
#ifdef CONFIG_ATH_DEBUG
- if (!debugfs_create_file("debug", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc, &fops_debug))
- goto err;
+ debugfs_create_file("debug", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_debug);
#endif
+ debugfs_create_file("dma", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_dma);
+ debugfs_create_file("interrupt", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_interrupt);
+ debugfs_create_file("wiphy", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_wiphy);
+ debugfs_create_file("xmit", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_xmit);
+ debugfs_create_file("stations", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_stations);
+ debugfs_create_file("misc", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_misc);
+ debugfs_create_file("recv", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_recv);
+ debugfs_create_file("rx_chainmask", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, sc, &fops_rx_chainmask);
+ debugfs_create_file("tx_chainmask", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, sc, &fops_tx_chainmask);
+ debugfs_create_file("regidx", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_regidx);
+ debugfs_create_file("regval", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_regval);
+ debugfs_create_bool("ignore_extcca", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy,
+ &ah->config.cwm_ignore_extcca);
+ debugfs_create_file("regdump", S_IRUSR, sc->debug.debugfs_phy, sc,
+ &fops_regdump);
- if (!debugfs_create_file("dma", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_dma))
- goto err;
+ debugfs_create_u32("gpio_mask", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, &sc->sc_ah->gpio_mask);
- if (!debugfs_create_file("interrupt", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_interrupt))
- goto err;
-
- if (!debugfs_create_file("wiphy", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc, &fops_wiphy))
- goto err;
-
- if (!debugfs_create_file("xmit", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_xmit))
- goto err;
-
- if (!debugfs_create_file("stations", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_stations))
- goto err;
-
- if (!debugfs_create_file("misc", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_misc))
- goto err;
-
- if (!debugfs_create_file("recv", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_recv))
- goto err;
-
- if (!debugfs_create_file("rx_chainmask", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc, &fops_rx_chainmask))
- goto err;
-
- if (!debugfs_create_file("tx_chainmask", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc, &fops_tx_chainmask))
- goto err;
-
- if (!debugfs_create_file("regidx", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc, &fops_regidx))
- goto err;
-
- if (!debugfs_create_file("regval", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, sc, &fops_regval))
- goto err;
-
- if (!debugfs_create_bool("ignore_extcca", S_IRUSR | S_IWUSR,
- sc->debug.debugfs_phy, &ah->config.cwm_ignore_extcca))
- goto err;
-
- if (!debugfs_create_file("regdump", S_IRUSR, sc->debug.debugfs_phy,
- sc, &fops_regdump))
- goto err;
+ debugfs_create_u32("gpio_val", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, &sc->sc_ah->gpio_val);
sc->debug.regidx = 0;
return 0;
-err:
- debugfs_remove_recursive(sc->debug.debugfs_phy);
- sc->debug.debugfs_phy = NULL;
- return -ENOMEM;
}
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 59338de..5488a32 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -54,6 +54,9 @@
* @dtimsync: DTIM sync lossage
* @dtim: RX Beacon with DTIM
* @bb_watchdog: Baseband watchdog
+ * @tsfoor: TSF out of range, indicates that the corrected TSF received
+ * from a beacon differs from the PCU's internal TSF by more than a
+ * (programmable) threshold
*/
struct ath_interrupt_stats {
u32 total;
@@ -78,6 +81,7 @@
u32 dtimsync;
u32 dtim;
u32 bb_watchdog;
+ u32 tsfoor;
};
/**
@@ -157,6 +161,13 @@
u32 post_delim_crc_err;
u32 decrypt_busy_err;
u32 phy_err_stats[ATH9K_PHYERR_MAX];
+ int8_t rs_rssi_ctl0;
+ int8_t rs_rssi_ctl1;
+ int8_t rs_rssi_ctl2;
+ int8_t rs_rssi_ext0;
+ int8_t rs_rssi_ext1;
+ int8_t rs_rssi_ext2;
+ u8 rs_antenna;
};
struct ath_stats {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index bd82447..3e31613 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -436,7 +436,11 @@
u8 db2_2:4, db2_3:4;
u8 db2_4:4, reserved:4;
#endif
- u8 futureModal[4];
+ u8 tx_diversity;
+ u8 flc_pwr_thresh;
+ u8 bb_scale_smrt_antenna;
+#define EEP_4K_BB_DESIRED_SCALE_MASK 0x1f
+ u8 futureModal[1];
struct spur_chan spurChans[AR_EEPROM_MODAL_SPURS];
} __packed;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index bc77a30..6f714dd 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -781,6 +781,7 @@
{
struct modal_eep_4k_header *pModal;
struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
+ struct base_eep_header_4k *pBase = &eep->baseEepHeader;
u8 txRxAttenLocal;
u8 ob[5], db1[5], db2[5];
u8 ant_div_control1, ant_div_control2;
@@ -1003,6 +1004,31 @@
AR_PHY_SETTLING_SWITCH,
pModal->swSettleHt40);
}
+ if (AR_SREV_9271(ah) || AR_SREV_9285(ah)) {
+ u8 bb_desired_scale = (pModal->bb_scale_smrt_antenna &
+ EEP_4K_BB_DESIRED_SCALE_MASK);
+ if ((pBase->txGainType == 0) && (bb_desired_scale != 0)) {
+ u32 pwrctrl, mask, clr;
+
+ mask = BIT(0)|BIT(5)|BIT(10)|BIT(15)|BIT(20)|BIT(25);
+ pwrctrl = mask * bb_desired_scale;
+ clr = mask * 0x1f;
+ REG_RMW(ah, AR_PHY_TX_PWRCTRL8, pwrctrl, clr);
+ REG_RMW(ah, AR_PHY_TX_PWRCTRL10, pwrctrl, clr);
+ REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL12, pwrctrl, clr);
+
+ mask = BIT(0)|BIT(5)|BIT(15);
+ pwrctrl = mask * bb_desired_scale;
+ clr = mask * 0x1f;
+ REG_RMW(ah, AR_PHY_TX_PWRCTRL9, pwrctrl, clr);
+
+ mask = BIT(0)|BIT(5);
+ pwrctrl = mask * bb_desired_scale;
+ clr = mask * 0x1f;
+ REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL11, pwrctrl, clr);
+ REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL13, pwrctrl, clr);
+ }
+ }
}
static u16 ath9k_hw_4k_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 8cd8333..b87db47 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -319,10 +319,9 @@
u16 numXpdGain, xpdMask;
u16 xpdGainValues[AR5416_NUM_PD_GAINS] = {0, 0, 0, 0};
u32 reg32, regOffset, regChainOffset, regval;
- int16_t modalIdx, diff = 0;
+ int16_t diff = 0;
struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
- modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
xpdMask = pEepData->modalHeader.xpdGain;
if ((pEepData->baseEepHeader.version & AR9287_EEP_VER_MINOR_MASK) >=
@@ -392,6 +391,8 @@
numXpdGain);
}
+ ENABLE_REGWRITE_BUFFER(ah);
+
if (i == 0) {
if (!ath9k_hw_ar9287_get_eeprom(ah,
EEP_OL_PWRCTRL)) {
@@ -442,6 +443,7 @@
regOffset += 4;
}
}
+ REGWRITE_BUFFER_FLUSH(ah);
}
}
@@ -757,6 +759,8 @@
ratesArray[i] -= AR9287_PWR_TABLE_OFFSET_DB * 2;
}
+ ENABLE_REGWRITE_BUFFER(ah);
+
/* OFDM power per rate */
REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
ATH9K_POW_SM(ratesArray[rate18mb], 24)
@@ -840,6 +844,7 @@
| ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
| ATH9K_POW_SM(ratesArray[rateDupCck], 0));
}
+ REGWRITE_BUFFER_FLUSH(ah);
}
static void ath9k_hw_ar9287_set_addac(struct ath_hw *ah,
@@ -852,35 +857,12 @@
{
struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
- u16 antWrites[AR9287_ANT_16S];
u32 regChainOffset, regval;
u8 txRxAttenLocal;
- int i, j, offset_num;
+ int i;
pModal = &eep->modalHeader;
- antWrites[0] = (u16)((pModal->antCtrlCommon >> 28) & 0xF);
- antWrites[1] = (u16)((pModal->antCtrlCommon >> 24) & 0xF);
- antWrites[2] = (u16)((pModal->antCtrlCommon >> 20) & 0xF);
- antWrites[3] = (u16)((pModal->antCtrlCommon >> 16) & 0xF);
- antWrites[4] = (u16)((pModal->antCtrlCommon >> 12) & 0xF);
- antWrites[5] = (u16)((pModal->antCtrlCommon >> 8) & 0xF);
- antWrites[6] = (u16)((pModal->antCtrlCommon >> 4) & 0xF);
- antWrites[7] = (u16)(pModal->antCtrlCommon & 0xF);
-
- offset_num = 8;
-
- for (i = 0, j = offset_num; i < AR9287_MAX_CHAINS; i++) {
- antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 28) & 0xf);
- antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 10) & 0x3);
- antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 8) & 0x3);
- antWrites[j++] = 0;
- antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 6) & 0x3);
- antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 4) & 0x3);
- antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 2) & 0x3);
- antWrites[j++] = (u16)(pModal->antCtrlChain[i] & 0x3);
- }
-
REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon);
for (i = 0; i < AR9287_MAX_CHAINS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index fccd87d..c031854 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -231,6 +231,10 @@
integer = swab32(pModal->antCtrlChain[i]);
pModal->antCtrlChain[i] = integer;
}
+ for (i = 0; i < 3; i++) {
+ word = swab16(pModal->xpaBiasLvlFreq[i]);
+ pModal->xpaBiasLvlFreq[i] = word;
+ }
for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
word = swab16(pModal->spurChans[i].spurChan);
@@ -799,6 +803,8 @@
pwr_table_offset,
&diff);
+ ENABLE_REGWRITE_BUFFER(ah);
+
if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
if (OLC_FOR_AR9280_20_LATER) {
REG_WRITE(ah,
@@ -847,6 +853,7 @@
regOffset += 4;
}
+ REGWRITE_BUFFER_FLUSH(ah);
}
}
@@ -1205,6 +1212,8 @@
}
}
+ ENABLE_REGWRITE_BUFFER(ah);
+
REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
ATH9K_POW_SM(ratesArray[rate18mb], 24)
| ATH9K_POW_SM(ratesArray[rate12mb], 16)
@@ -1291,6 +1300,8 @@
REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
ATH9K_POW_SM(pModal->pwrDecreaseFor3Chain, 6)
| ATH9K_POW_SM(pModal->pwrDecreaseFor2Chain, 0));
+
+ REGWRITE_BUFFER_FLUSH(ah);
}
static u16 ath9k_hw_def_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 0fb8f8a..0349b3a 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -41,12 +41,16 @@
{
int ret;
- if (AR_SREV_9287(sc->sc_ah))
- sc->sc_ah->led_pin = ATH_LED_PIN_9287;
- else if (AR_SREV_9485(sc->sc_ah))
- sc->sc_ah->led_pin = ATH_LED_PIN_9485;
- else
- sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
+ if (sc->sc_ah->led_pin < 0) {
+ if (AR_SREV_9287(sc->sc_ah))
+ sc->sc_ah->led_pin = ATH_LED_PIN_9287;
+ else if (AR_SREV_9485(sc->sc_ah))
+ sc->sc_ah->led_pin = ATH_LED_PIN_9485;
+ else if (AR_SREV_9300(sc->sc_ah))
+ sc->sc_ah->led_pin = ATH_LED_PIN_9300;
+ else
+ sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
+ }
/* Configure gpio 1 for output */
ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
@@ -136,10 +140,10 @@
static void ath9k_gen_timer_start(struct ath_hw *ah,
struct ath_gen_timer *timer,
- u32 timer_next,
+ u32 trig_timeout,
u32 timer_period)
{
- ath9k_hw_gen_timer_start(ah, timer, timer_next, timer_period);
+ ath9k_hw_gen_timer_start(ah, timer, trig_timeout, timer_period);
if ((ah->imask & ATH9K_INT_GENTIMER) == 0) {
ath9k_hw_disable_interrupts(ah);
@@ -172,17 +176,17 @@
struct ath_softc *sc = (struct ath_softc *) data;
struct ath_hw *ah = sc->sc_ah;
struct ath_btcoex *btcoex = &sc->btcoex;
- struct ath_common *common = ath9k_hw_common(ah);
u32 timer_period;
bool is_btscan;
+ ath9k_ps_wakeup(sc);
ath_detect_bt_priority(sc);
is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
spin_lock_bh(&btcoex->btcoex_lock);
- ath9k_cmn_btcoex_bt_stomp(common, is_btscan ? ATH_BTCOEX_STOMP_ALL :
+ ath9k_hw_btcoex_bt_stomp(ah, is_btscan ? ATH_BTCOEX_STOMP_ALL :
btcoex->bt_stomp_type);
spin_unlock_bh(&btcoex->btcoex_lock);
@@ -193,11 +197,12 @@
timer_period = is_btscan ? btcoex->btscan_no_stomp :
btcoex->btcoex_no_stomp;
- ath9k_gen_timer_start(ah, btcoex->no_stomp_timer, 0,
+ ath9k_gen_timer_start(ah, btcoex->no_stomp_timer, timer_period,
timer_period * 10);
btcoex->hw_timer_enabled = true;
}
+ ath9k_ps_restore(sc);
mod_timer(&btcoex->period_timer, jiffies +
msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
}
@@ -217,14 +222,16 @@
ath_dbg(common, ATH_DBG_BTCOEX,
"no stomp timer running\n");
+ ath9k_ps_wakeup(sc);
spin_lock_bh(&btcoex->btcoex_lock);
if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
- ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_NONE);
+ ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
- ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_LOW);
+ ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_LOW);
spin_unlock_bh(&btcoex->btcoex_lock);
+ ath9k_ps_restore(sc);
}
int ath_init_btcoex_timer(struct ath_softc *sc)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 2d10239..2e3a33a 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -17,11 +17,9 @@
#include "htc.h"
/* identify firmware images */
-#define FIRMWARE_AR7010 "ar7010.fw"
-#define FIRMWARE_AR7010_1_1 "ar7010_1_1.fw"
-#define FIRMWARE_AR9271 "ar9271.fw"
+#define FIRMWARE_AR7010_1_1 "htc_7010.fw"
+#define FIRMWARE_AR9271 "htc_9271.fw"
-MODULE_FIRMWARE(FIRMWARE_AR7010);
MODULE_FIRMWARE(FIRMWARE_AR7010_1_1);
MODULE_FIRMWARE(FIRMWARE_AR9271);
@@ -80,7 +78,7 @@
if (cmd) {
ath9k_htc_txcompletion_cb(cmd->hif_dev->htc_handle,
- cmd->skb, 1);
+ cmd->skb, true);
kfree(cmd);
}
@@ -126,6 +124,90 @@
return ret;
}
+static void hif_usb_mgmt_cb(struct urb *urb)
+{
+ struct cmd_buf *cmd = (struct cmd_buf *)urb->context;
+ struct hif_device_usb *hif_dev = cmd->hif_dev;
+ bool txok = true;
+
+ if (!cmd || !cmd->skb || !cmd->hif_dev)
+ return;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ txok = false;
+
+ /*
+ * If the URBs are being flushed, no need to complete
+ * this packet.
+ */
+ spin_lock(&hif_dev->tx.tx_lock);
+ if (hif_dev->tx.flags & HIF_USB_TX_FLUSH) {
+ spin_unlock(&hif_dev->tx.tx_lock);
+ dev_kfree_skb_any(cmd->skb);
+ kfree(cmd);
+ return;
+ }
+ spin_unlock(&hif_dev->tx.tx_lock);
+
+ break;
+ default:
+ txok = false;
+ break;
+ }
+
+ skb_pull(cmd->skb, 4);
+ ath9k_htc_txcompletion_cb(cmd->hif_dev->htc_handle,
+ cmd->skb, txok);
+ kfree(cmd);
+}
+
+static int hif_usb_send_mgmt(struct hif_device_usb *hif_dev,
+ struct sk_buff *skb)
+{
+ struct urb *urb;
+ struct cmd_buf *cmd;
+ int ret = 0;
+ __le16 *hdr;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (urb == NULL)
+ return -ENOMEM;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ if (cmd == NULL) {
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ cmd->skb = skb;
+ cmd->hif_dev = hif_dev;
+
+ hdr = (__le16 *) skb_push(skb, 4);
+ *hdr++ = cpu_to_le16(skb->len - 4);
+ *hdr++ = cpu_to_le16(ATH_USB_TX_STREAM_MODE_TAG);
+
+ usb_fill_bulk_urb(urb, hif_dev->udev,
+ usb_sndbulkpipe(hif_dev->udev, USB_WLAN_TX_PIPE),
+ skb->data, skb->len,
+ hif_usb_mgmt_cb, cmd);
+
+ usb_anchor_urb(urb, &hif_dev->mgmt_submitted);
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ usb_unanchor_urb(urb);
+ kfree(cmd);
+ }
+ usb_free_urb(urb);
+
+ return ret;
+}
+
static inline void ath9k_skb_queue_purge(struct hif_device_usb *hif_dev,
struct sk_buff_head *list)
{
@@ -133,7 +215,22 @@
while ((skb = __skb_dequeue(list)) != NULL) {
dev_kfree_skb_any(skb);
- TX_STAT_INC(skb_dropped);
+ }
+}
+
+static inline void ath9k_skb_queue_complete(struct hif_device_usb *hif_dev,
+ struct sk_buff_head *queue,
+ bool txok)
+{
+ struct sk_buff *skb;
+
+ while ((skb = __skb_dequeue(queue)) != NULL) {
+ ath9k_htc_txcompletion_cb(hif_dev->htc_handle,
+ skb, txok);
+ if (txok)
+ TX_STAT_INC(skb_success);
+ else
+ TX_STAT_INC(skb_failed);
}
}
@@ -141,7 +238,7 @@
{
struct tx_buf *tx_buf = (struct tx_buf *) urb->context;
struct hif_device_usb *hif_dev;
- struct sk_buff *skb;
+ bool txok = true;
if (!tx_buf || !tx_buf->hif_dev)
return;
@@ -155,10 +252,7 @@
case -ECONNRESET:
case -ENODEV:
case -ESHUTDOWN:
- /*
- * The URB has been killed, free the SKBs.
- */
- ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
+ txok = false;
/*
* If the URBs are being flushed, no need to add this
@@ -167,41 +261,19 @@
spin_lock(&hif_dev->tx.tx_lock);
if (hif_dev->tx.flags & HIF_USB_TX_FLUSH) {
spin_unlock(&hif_dev->tx.tx_lock);
+ ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
return;
}
spin_unlock(&hif_dev->tx.tx_lock);
- /*
- * In the stop() case, this URB has to be added to
- * the free list.
- */
- goto add_free;
+ break;
default:
+ txok = false;
break;
}
- /*
- * Check if TX has been stopped, this is needed because
- * this CB could have been invoked just after the TX lock
- * was released in hif_stop() and kill_urb() hasn't been
- * called yet.
- */
- spin_lock(&hif_dev->tx.tx_lock);
- if (hif_dev->tx.flags & HIF_USB_TX_STOP) {
- spin_unlock(&hif_dev->tx.tx_lock);
- ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
- goto add_free;
- }
- spin_unlock(&hif_dev->tx.tx_lock);
+ ath9k_skb_queue_complete(hif_dev, &tx_buf->skb_queue, txok);
- /* Complete the queued SKBs. */
- while ((skb = __skb_dequeue(&tx_buf->skb_queue)) != NULL) {
- ath9k_htc_txcompletion_cb(hif_dev->htc_handle,
- skb, 1);
- TX_STAT_INC(skb_completed);
- }
-
-add_free:
/* Re-initialize the SKB queue */
tx_buf->len = tx_buf->offset = 0;
__skb_queue_head_init(&tx_buf->skb_queue);
@@ -274,7 +346,7 @@
ret = usb_submit_urb(tx_buf->urb, GFP_ATOMIC);
if (ret) {
tx_buf->len = tx_buf->offset = 0;
- ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
+ ath9k_skb_queue_complete(hif_dev, &tx_buf->skb_queue, false);
__skb_queue_head_init(&tx_buf->skb_queue);
list_move_tail(&tx_buf->list, &hif_dev->tx.tx_buf);
hif_dev->tx.tx_buf_cnt++;
@@ -286,10 +358,11 @@
return ret;
}
-static int hif_usb_send_tx(struct hif_device_usb *hif_dev, struct sk_buff *skb,
- struct ath9k_htc_tx_ctl *tx_ctl)
+static int hif_usb_send_tx(struct hif_device_usb *hif_dev, struct sk_buff *skb)
{
+ struct ath9k_htc_tx_ctl *tx_ctl;
unsigned long flags;
+ int ret = 0;
spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
@@ -304,26 +377,36 @@
return -ENOMEM;
}
- __skb_queue_tail(&hif_dev->tx.tx_skb_queue, skb);
- hif_dev->tx.tx_skb_cnt++;
+ spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
- /* Send normal frames immediately */
- if (!tx_ctl || (tx_ctl && (tx_ctl->type == ATH9K_HTC_NORMAL)))
- __hif_usb_tx(hif_dev);
+ tx_ctl = HTC_SKB_CB(skb);
+
+ /* Mgmt/Beacon frames don't use the TX buffer pool */
+ if ((tx_ctl->type == ATH9K_HTC_MGMT) ||
+ (tx_ctl->type == ATH9K_HTC_BEACON)) {
+ ret = hif_usb_send_mgmt(hif_dev, skb);
+ }
+
+ spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
+
+ if ((tx_ctl->type == ATH9K_HTC_NORMAL) ||
+ (tx_ctl->type == ATH9K_HTC_AMPDU)) {
+ __skb_queue_tail(&hif_dev->tx.tx_skb_queue, skb);
+ hif_dev->tx.tx_skb_cnt++;
+ }
/* Check if AMPDUs have to be sent immediately */
- if (tx_ctl && (tx_ctl->type == ATH9K_HTC_AMPDU) &&
- (hif_dev->tx.tx_buf_cnt == MAX_TX_URB_NUM) &&
+ if ((hif_dev->tx.tx_buf_cnt == MAX_TX_URB_NUM) &&
(hif_dev->tx.tx_skb_cnt < 2)) {
__hif_usb_tx(hif_dev);
}
spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
- return 0;
+ return ret;
}
-static void hif_usb_start(void *hif_handle, u8 pipe_id)
+static void hif_usb_start(void *hif_handle)
{
struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
unsigned long flags;
@@ -335,14 +418,14 @@
spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
}
-static void hif_usb_stop(void *hif_handle, u8 pipe_id)
+static void hif_usb_stop(void *hif_handle)
{
struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
unsigned long flags;
spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
- ath9k_skb_queue_purge(hif_dev, &hif_dev->tx.tx_skb_queue);
+ ath9k_skb_queue_complete(hif_dev, &hif_dev->tx.tx_skb_queue, false);
hif_dev->tx.tx_skb_cnt = 0;
hif_dev->tx.flags |= HIF_USB_TX_STOP;
spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
@@ -352,17 +435,18 @@
&hif_dev->tx.tx_pending, list) {
usb_kill_urb(tx_buf->urb);
}
+
+ usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
}
-static int hif_usb_send(void *hif_handle, u8 pipe_id, struct sk_buff *skb,
- struct ath9k_htc_tx_ctl *tx_ctl)
+static int hif_usb_send(void *hif_handle, u8 pipe_id, struct sk_buff *skb)
{
struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
int ret = 0;
switch (pipe_id) {
case USB_WLAN_TX_PIPE:
- ret = hif_usb_send_tx(hif_dev, skb, tx_ctl);
+ ret = hif_usb_send_tx(hif_dev, skb);
break;
case USB_REG_OUT_PIPE:
ret = hif_usb_send_regout(hif_dev, skb);
@@ -377,6 +461,40 @@
return ret;
}
+static inline bool check_index(struct sk_buff *skb, u8 idx)
+{
+ struct ath9k_htc_tx_ctl *tx_ctl;
+
+ tx_ctl = HTC_SKB_CB(skb);
+
+ if ((tx_ctl->type == ATH9K_HTC_AMPDU) &&
+ (tx_ctl->sta_idx == idx))
+ return true;
+
+ return false;
+}
+
+static void hif_usb_sta_drain(void *hif_handle, u8 idx)
+{
+ struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
+ struct sk_buff *skb, *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
+
+ skb_queue_walk_safe(&hif_dev->tx.tx_skb_queue, skb, tmp) {
+ if (check_index(skb, idx)) {
+ __skb_unlink(skb, &hif_dev->tx.tx_skb_queue);
+ ath9k_htc_txcompletion_cb(hif_dev->htc_handle,
+ skb, false);
+ hif_dev->tx.tx_skb_cnt--;
+ TX_STAT_INC(skb_failed);
+ }
+ }
+
+ spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+}
+
static struct ath9k_htc_hif hif_usb = {
.transport = ATH9K_HIF_USB,
.name = "ath9k_hif_usb",
@@ -386,6 +504,7 @@
.start = hif_usb_start,
.stop = hif_usb_stop,
+ .sta_drain = hif_usb_sta_drain,
.send = hif_usb_send,
};
@@ -567,6 +686,9 @@
case -ESHUTDOWN:
goto free;
default:
+ skb_reset_tail_pointer(skb);
+ skb_trim(skb, 0);
+
goto resubmit;
}
@@ -591,23 +713,15 @@
USB_REG_IN_PIPE),
nskb->data, MAX_REG_IN_BUF_SIZE,
ath9k_hif_usb_reg_in_cb, nskb);
-
- ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret) {
- kfree_skb(nskb);
- urb->context = NULL;
- }
-
- return;
}
resubmit:
- skb_reset_tail_pointer(skb);
- skb_trim(skb, 0);
-
+ usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret)
+ if (ret) {
+ usb_unanchor_urb(urb);
goto free;
+ }
return;
free:
@@ -641,6 +755,8 @@
kfree(tx_buf->buf);
kfree(tx_buf);
}
+
+ usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
}
static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev)
@@ -652,6 +768,7 @@
INIT_LIST_HEAD(&hif_dev->tx.tx_pending);
spin_lock_init(&hif_dev->tx.tx_lock);
__skb_queue_head_init(&hif_dev->tx.tx_skb_queue);
+ init_usb_anchor(&hif_dev->mgmt_submitted);
for (i = 0; i < MAX_TX_URB_NUM; i++) {
tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
@@ -748,43 +865,67 @@
return ret;
}
-static void ath9k_hif_usb_dealloc_reg_in_urb(struct hif_device_usb *hif_dev)
+static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)
{
- if (hif_dev->reg_in_urb) {
- usb_kill_urb(hif_dev->reg_in_urb);
- if (hif_dev->reg_in_urb->context)
- kfree_skb((void *)hif_dev->reg_in_urb->context);
- usb_free_urb(hif_dev->reg_in_urb);
- hif_dev->reg_in_urb = NULL;
- }
+ usb_kill_anchored_urbs(&hif_dev->reg_in_submitted);
}
-static int ath9k_hif_usb_alloc_reg_in_urb(struct hif_device_usb *hif_dev)
+static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
{
- struct sk_buff *skb;
+ struct urb *urb = NULL;
+ struct sk_buff *skb = NULL;
+ int i, ret;
- hif_dev->reg_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (hif_dev->reg_in_urb == NULL)
- return -ENOMEM;
+ init_usb_anchor(&hif_dev->reg_in_submitted);
- skb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_KERNEL);
- if (!skb)
- goto err;
+ for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
- usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev,
- usb_rcvbulkpipe(hif_dev->udev,
- USB_REG_IN_PIPE),
- skb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, skb);
+ /* Allocate URB */
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (urb == NULL) {
+ ret = -ENOMEM;
+ goto err_urb;
+ }
- if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0)
- goto err;
+ /* Allocate buffer */
+ skb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_KERNEL);
+ if (!skb) {
+ ret = -ENOMEM;
+ goto err_skb;
+ }
+
+ usb_fill_bulk_urb(urb, hif_dev->udev,
+ usb_rcvbulkpipe(hif_dev->udev,
+ USB_REG_IN_PIPE),
+ skb->data, MAX_REG_IN_BUF_SIZE,
+ ath9k_hif_usb_reg_in_cb, skb);
+
+ /* Anchor URB */
+ usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
+
+ /* Submit URB */
+ ret = usb_submit_urb(urb, GFP_KERNEL);
+ if (ret) {
+ usb_unanchor_urb(urb);
+ goto err_submit;
+ }
+
+ /*
+ * Drop reference count.
+ * This ensures that the URB is freed when killing them.
+ */
+ usb_free_urb(urb);
+ }
return 0;
-err:
- ath9k_hif_usb_dealloc_reg_in_urb(hif_dev);
- return -ENOMEM;
+err_submit:
+ kfree_skb(skb);
+err_skb:
+ usb_free_urb(urb);
+err_urb:
+ ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
+ return ret;
}
static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev)
@@ -801,7 +942,7 @@
goto err_rx;
/* Register Read */
- if (ath9k_hif_usb_alloc_reg_in_urb(hif_dev) < 0)
+ if (ath9k_hif_usb_alloc_reg_in_urbs(hif_dev) < 0)
goto err_reg;
return 0;
@@ -816,7 +957,7 @@
static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
{
usb_kill_anchored_urbs(&hif_dev->regout_submitted);
- ath9k_hif_usb_dealloc_reg_in_urb(hif_dev);
+ ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
ath9k_hif_usb_dealloc_tx_urbs(hif_dev);
ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
}
@@ -1026,10 +1167,7 @@
/* Find out which firmware to load */
if (IS_AR7010_DEVICE(id->driver_info))
- if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202)
- hif_dev->fw_name = FIRMWARE_AR7010_1_1;
- else
- hif_dev->fw_name = FIRMWARE_AR7010;
+ hif_dev->fw_name = FIRMWARE_AR7010_1_1;
else
hif_dev->fw_name = FIRMWARE_AR9271;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 7b9d863..2bdcdbc 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -17,6 +17,9 @@
#ifndef HTC_USB_H
#define HTC_USB_H
+#define MAJOR_VERSION_REQ 1
+#define MINOR_VERSION_REQ 2
+
#define IS_AR7010_DEVICE(_v) (((_v) == AR9280_USB) || ((_v) == AR9287_USB))
#define AR9271_FIRMWARE 0x501000
@@ -31,7 +34,7 @@
/* FIXME: Verify these numbers (with Windows) */
#define MAX_TX_URB_NUM 8
-#define MAX_TX_BUF_NUM 1024
+#define MAX_TX_BUF_NUM 256
#define MAX_TX_BUF_SIZE 32768
#define MAX_TX_AGGR_NUM 20
@@ -40,7 +43,7 @@
#define MAX_PKT_NUM_IN_TRANSFER 10
#define MAX_REG_OUT_URB_NUM 1
-#define MAX_REG_OUT_BUF_NUM 8
+#define MAX_REG_IN_URB_NUM 64
#define MAX_REG_IN_BUF_SIZE 64
@@ -90,9 +93,10 @@
const struct firmware *firmware;
struct htc_target *htc_handle;
struct hif_usb_tx tx;
- struct urb *reg_in_urb;
struct usb_anchor regout_submitted;
struct usb_anchor rx_submitted;
+ struct usb_anchor reg_in_submitted;
+ struct usb_anchor mgmt_submitted;
struct sk_buff *remain_skb;
const char *fw_name;
int rx_remain_len;
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 753a245..dfc7a98 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -66,13 +66,13 @@
HTC_M_WDS = 2
};
-#define ATH9K_HTC_HDRSPACE sizeof(struct htc_frame_hdr)
-#define ATH9K_HTC_AMPDU 1
+#define ATH9K_HTC_AMPDU 1
#define ATH9K_HTC_NORMAL 2
+#define ATH9K_HTC_BEACON 3
+#define ATH9K_HTC_MGMT 4
#define ATH9K_HTC_TX_CTSONLY 0x1
#define ATH9K_HTC_TX_RTSCTS 0x2
-#define ATH9K_HTC_TX_USE_MIN_RATE 0x100
struct tx_frame_hdr {
u8 data_type;
@@ -82,7 +82,8 @@
__be32 flags; /* ATH9K_HTC_TX_* */
u8 key_type;
u8 keyix;
- u8 reserved[26];
+ u8 cookie;
+ u8 pad;
} __packed;
struct tx_mgmt_hdr {
@@ -92,50 +93,34 @@
u8 flags;
u8 key_type;
u8 keyix;
- u16 reserved;
+ u8 cookie;
+ u8 pad;
} __packed;
struct tx_beacon_header {
- u8 len_changed;
u8 vif_index;
+ u8 len_changed;
u16 rev;
} __packed;
-struct ath9k_htc_target_hw {
- u32 flags;
- u32 flags_ext;
- u32 ampdu_limit;
- u8 ampdu_subframes;
- u8 tx_chainmask;
- u8 tx_chainmask_legacy;
- u8 rtscts_ratecode;
- u8 protmode;
-} __packed;
+#define MAX_TX_AMPDU_SUBFRAMES_9271 17
+#define MAX_TX_AMPDU_SUBFRAMES_7010 22
struct ath9k_htc_cap_target {
- u32 flags;
- u32 flags_ext;
- u32 ampdu_limit;
+ __be32 ampdu_limit;
u8 ampdu_subframes;
+ u8 enable_coex;
u8 tx_chainmask;
- u8 tx_chainmask_legacy;
- u8 rtscts_ratecode;
- u8 protmode;
+ u8 pad;
} __packed;
struct ath9k_htc_target_vif {
u8 index;
- u8 des_bssid[ETH_ALEN];
- __be32 opmode;
+ u8 opmode;
u8 myaddr[ETH_ALEN];
- u8 bssid[ETH_ALEN];
- u32 flags;
- u32 flags_ext;
- u16 ps_sta;
- __be16 rtsthreshold;
u8 ath_cap;
- u8 node;
- s8 mcast_rate;
+ __be16 rtsthreshold;
+ u8 pad;
} __packed;
#define ATH_HTC_STA_AUTH 0x0001
@@ -143,27 +128,16 @@
#define ATH_HTC_STA_ERP 0x0004
#define ATH_HTC_STA_HT 0x0008
-/* FIXME: UAPSD variables */
struct ath9k_htc_target_sta {
- u16 associd;
- u16 txpower;
- u32 ucastkey;
u8 macaddr[ETH_ALEN];
u8 bssid[ETH_ALEN];
u8 sta_index;
u8 vif_index;
- u8 vif_sta;
- __be16 flags; /* ATH_HTC_STA_* */
- u16 htcap;
- u8 valid;
- u16 capinfo;
- struct ath9k_htc_target_hw *hw;
- struct ath9k_htc_target_vif *vif;
- u16 txseqmgmt;
u8 is_vif_sta;
- u16 maxampdu;
- u16 iv16;
- u32 iv32;
+ __be16 flags; /* ATH_HTC_STA_* */
+ __be16 htcap;
+ __be16 maxampdu;
+ u8 pad;
} __packed;
struct ath9k_htc_target_aggr {
@@ -197,12 +171,38 @@
struct ath9k_htc_rate rates;
};
-struct ath9k_htc_target_stats {
- __be32 tx_shortretry;
- __be32 tx_longretry;
- __be32 tx_xretries;
- __be32 ht_txunaggr_xretry;
- __be32 ht_tx_xretries;
+struct ath9k_htc_target_rate_mask {
+ u8 vif_index;
+ u8 band;
+ __be32 mask;
+ u16 pad;
+} __packed;
+
+struct ath9k_htc_target_int_stats {
+ __be32 rx;
+ __be32 rxorn;
+ __be32 rxeol;
+ __be32 txurn;
+ __be32 txto;
+ __be32 cst;
+} __packed;
+
+struct ath9k_htc_target_tx_stats {
+ __be32 xretries;
+ __be32 fifoerr;
+ __be32 filtered;
+ __be32 timer_exp;
+ __be32 shortretries;
+ __be32 longretries;
+ __be32 qnull;
+ __be32 encap_fail;
+ __be32 nobuf;
+} __packed;
+
+struct ath9k_htc_target_rx_stats {
+ __be32 nobuf;
+ __be32 host_send;
+ __be32 host_done;
} __packed;
#define ATH9K_HTC_MAX_VIF 2
@@ -244,6 +244,8 @@
u8 index;
u16 seq_no;
bool beacon_configured;
+ int bslot;
+ __le64 tsfadjust;
};
struct ath9k_vif_iter_data {
@@ -282,23 +284,65 @@
spinlock_t rxbuflock;
};
+#define ATH9K_HTC_TX_CLEANUP_INTERVAL 50 /* ms */
+#define ATH9K_HTC_TX_TIMEOUT_INTERVAL 2500 /* ms */
+#define ATH9K_HTC_TX_RESERVE 10
+#define ATH9K_HTC_TX_TIMEOUT_COUNT 20
+#define ATH9K_HTC_TX_THRESHOLD (MAX_TX_BUF_NUM - ATH9K_HTC_TX_RESERVE)
+
+#define ATH9K_HTC_OP_TX_QUEUES_STOP BIT(0)
+#define ATH9K_HTC_OP_TX_DRAIN BIT(1)
+
+struct ath9k_htc_tx {
+ u8 flags;
+ int queued_cnt;
+ struct sk_buff_head mgmt_ep_queue;
+ struct sk_buff_head cab_ep_queue;
+ struct sk_buff_head data_be_queue;
+ struct sk_buff_head data_bk_queue;
+ struct sk_buff_head data_vi_queue;
+ struct sk_buff_head data_vo_queue;
+ struct sk_buff_head tx_failed;
+ DECLARE_BITMAP(tx_slot, MAX_TX_BUF_NUM);
+ struct timer_list cleanup_timer;
+ spinlock_t tx_lock;
+};
+
struct ath9k_htc_tx_ctl {
u8 type; /* ATH9K_HTC_* */
+ u8 epid;
+ u8 txok;
+ u8 sta_idx;
+ unsigned long timestamp;
};
+static inline struct ath9k_htc_tx_ctl *HTC_SKB_CB(struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+
+ BUILD_BUG_ON(sizeof(struct ath9k_htc_tx_ctl) >
+ IEEE80211_TX_INFO_DRIVER_DATA_SIZE);
+ return (struct ath9k_htc_tx_ctl *) &tx_info->driver_data;
+}
+
#ifdef CONFIG_ATH9K_HTC_DEBUGFS
#define TX_STAT_INC(c) (hif_dev->htc_handle->drv_priv->debug.tx_stats.c++)
#define RX_STAT_INC(c) (hif_dev->htc_handle->drv_priv->debug.rx_stats.c++)
+#define CAB_STAT_INC priv->debug.tx_stats.cab_queued++
#define TX_QSTAT_INC(q) (priv->debug.tx_stats.queue_stats[q]++)
+void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
+ struct ath_htc_rx_status *rxs);
+
struct ath_tx_stats {
u32 buf_queued;
u32 buf_completed;
u32 skb_queued;
- u32 skb_completed;
- u32 skb_dropped;
+ u32 skb_success;
+ u32 skb_failed;
+ u32 cab_queued;
u32 queue_stats[WME_NUM_AC];
};
@@ -306,55 +350,57 @@
u32 skb_allocated;
u32 skb_completed;
u32 skb_dropped;
+ u32 err_crc;
+ u32 err_decrypt_crc;
+ u32 err_mic;
+ u32 err_pre_delim;
+ u32 err_post_delim;
+ u32 err_decrypt_busy;
+ u32 err_phy;
+ u32 err_phy_stats[ATH9K_PHYERR_MAX];
};
struct ath9k_debug {
struct dentry *debugfs_phy;
- struct dentry *debugfs_tgt_stats;
- struct dentry *debugfs_xmit;
- struct dentry *debugfs_recv;
struct ath_tx_stats tx_stats;
struct ath_rx_stats rx_stats;
- u32 txrate;
};
#else
#define TX_STAT_INC(c) do { } while (0)
#define RX_STAT_INC(c) do { } while (0)
+#define CAB_STAT_INC do { } while (0)
#define TX_QSTAT_INC(c) do { } while (0)
+static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
+ struct ath_htc_rx_status *rxs)
+{
+}
+
#endif /* CONFIG_ATH9K_HTC_DEBUGFS */
#define ATH_LED_PIN_DEF 1
-#define ATH_LED_PIN_9287 8
+#define ATH_LED_PIN_9287 10
#define ATH_LED_PIN_9271 15
#define ATH_LED_PIN_7010 12
-#define ATH_LED_ON_DURATION_IDLE 350 /* in msecs */
-#define ATH_LED_OFF_DURATION_IDLE 250 /* in msecs */
-enum ath_led_type {
- ATH_LED_RADIO,
- ATH_LED_ASSOC,
- ATH_LED_TX,
- ATH_LED_RX
-};
+#define BSTUCK_THRESHOLD 10
-struct ath_led {
- struct ath9k_htc_priv *priv;
- struct led_classdev led_cdev;
- enum ath_led_type led_type;
- struct delayed_work brightness_work;
- char name[32];
- bool registered;
- int brightness;
-};
+/*
+ * Adjust these when the max. no of beaconing interfaces is
+ * increased.
+ */
+#define DEFAULT_SWBA_RESPONSE 40 /* in TUs */
+#define MIN_SWBA_RESPONSE 10 /* in TUs */
struct htc_beacon_config {
+ struct ieee80211_vif *bslot[ATH9K_HTC_MAX_BCN_VIF];
u16 beacon_interval;
u16 dtim_period;
u16 bmiss_timeout;
+ u32 bmiss_cnt;
};
struct ath_btcoex {
@@ -372,14 +418,11 @@
#define OP_INVALID BIT(0)
#define OP_SCANNING BIT(1)
-#define OP_LED_ASSOCIATED BIT(2)
-#define OP_LED_ON BIT(3)
-#define OP_ENABLE_BEACON BIT(4)
-#define OP_LED_DEINIT BIT(5)
-#define OP_BT_PRIORITY_DETECTED BIT(6)
-#define OP_BT_SCAN BIT(7)
-#define OP_ANI_RUNNING BIT(8)
-#define OP_TSF_RESET BIT(9)
+#define OP_ENABLE_BEACON BIT(2)
+#define OP_BT_PRIORITY_DETECTED BIT(3)
+#define OP_BT_SCAN BIT(4)
+#define OP_ANI_RUNNING BIT(5)
+#define OP_TSF_RESET BIT(6)
struct ath9k_htc_priv {
struct device *dev;
@@ -388,6 +431,9 @@
struct htc_target *htc;
struct wmi *wmi;
+ u16 fw_version_major;
+ u16 fw_version_minor;
+
enum htc_endpoint_id wmi_cmd_ep;
enum htc_endpoint_id beacon_ep;
enum htc_endpoint_id cab_ep;
@@ -411,27 +457,23 @@
u16 txpowlimit;
u16 nvifs;
u16 nstations;
- u32 bmiss_cnt;
bool rearm_ani;
bool reconfig_beacon;
+ unsigned int rxfilter;
struct ath9k_hw_cal_data caldata;
+ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
spinlock_t beacon_lock;
-
- bool tx_queues_stop;
- spinlock_t tx_lock;
-
- struct ieee80211_vif *vif;
struct htc_beacon_config cur_beacon_conf;
- unsigned int rxfilter;
+
+ struct ath9k_htc_rx rx;
+ struct ath9k_htc_tx tx;
+
struct tasklet_struct swba_tasklet;
struct tasklet_struct rx_tasklet;
- struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
- struct ath9k_htc_rx rx;
- struct tasklet_struct tx_tasklet;
- struct sk_buff_head tx_queue;
struct delayed_work ani_work;
+ struct tasklet_struct tx_failed_tasklet;
struct work_struct ps_work;
struct work_struct fatal_work;
@@ -440,15 +482,13 @@
bool ps_enabled;
bool ps_idle;
- struct ath_led radio_led;
- struct ath_led assoc_led;
- struct ath_led tx_led;
- struct ath_led rx_led;
- struct delayed_work ath9k_led_blink_work;
- int led_on_duration;
- int led_off_duration;
- int led_on_cnt;
- int led_off_cnt;
+#ifdef CONFIG_MAC80211_LEDS
+ enum led_brightness brightness;
+ bool led_registered;
+ char led_name[32];
+ struct led_classdev led_cdev;
+ struct work_struct led_work;
+#endif
int beaconq;
int cabq;
@@ -470,11 +510,18 @@
void ath9k_htc_reset(struct ath9k_htc_priv *priv);
+void ath9k_htc_assign_bslot(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif);
+void ath9k_htc_remove_bslot(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif);
+void ath9k_htc_set_tsfadjust(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif);
void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv);
void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
struct ieee80211_vif *vif);
void ath9k_htc_beacon_reconfig(struct ath9k_htc_priv *priv);
-void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending);
+void ath9k_htc_swba(struct ath9k_htc_priv *priv,
+ struct wmi_event_swba *swba);
void ath9k_htc_rxep(void *priv, struct sk_buff *skb,
enum htc_endpoint_id ep_id);
@@ -483,7 +530,8 @@
void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
enum htc_endpoint_id ep_id, bool txok);
-int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv);
+int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv,
+ u8 enable_coex);
void ath9k_htc_station_work(struct work_struct *work);
void ath9k_htc_aggr_work(struct work_struct *work);
void ath9k_htc_ani_work(struct work_struct *work);
@@ -491,14 +539,23 @@
void ath9k_htc_stop_ani(struct ath9k_htc_priv *priv);
int ath9k_tx_init(struct ath9k_htc_priv *priv);
-void ath9k_tx_tasklet(unsigned long data);
-int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb);
+int ath9k_htc_tx_start(struct ath9k_htc_priv *priv,
+ struct sk_buff *skb, u8 slot, bool is_cab);
void ath9k_tx_cleanup(struct ath9k_htc_priv *priv);
bool ath9k_htc_txq_setup(struct ath9k_htc_priv *priv, int subtype);
int ath9k_htc_cabq_setup(struct ath9k_htc_priv *priv);
int get_hw_qnum(u16 queue, int *hwq_map);
int ath_htc_txq_update(struct ath9k_htc_priv *priv, int qnum,
struct ath9k_tx_queue_info *qinfo);
+void ath9k_htc_check_stop_queues(struct ath9k_htc_priv *priv);
+void ath9k_htc_check_wake_queues(struct ath9k_htc_priv *priv);
+int ath9k_htc_tx_get_slot(struct ath9k_htc_priv *priv);
+void ath9k_htc_tx_clear_slot(struct ath9k_htc_priv *priv, int slot);
+void ath9k_htc_tx_drain(struct ath9k_htc_priv *priv);
+void ath9k_htc_txstatus(struct ath9k_htc_priv *priv, void *wmi_event);
+void ath9k_htc_tx_failed(struct ath9k_htc_priv *priv);
+void ath9k_tx_failed_tasklet(unsigned long data);
+void ath9k_htc_tx_cleanup_timer(unsigned long data);
int ath9k_rx_init(struct ath9k_htc_priv *priv);
void ath9k_rx_cleanup(struct ath9k_htc_priv *priv);
@@ -516,9 +573,24 @@
void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw);
void ath9k_htc_radio_enable(struct ieee80211_hw *hw);
void ath9k_htc_radio_disable(struct ieee80211_hw *hw);
-void ath9k_led_stop_brightness(struct ath9k_htc_priv *priv);
+
+#ifdef CONFIG_MAC80211_LEDS
void ath9k_init_leds(struct ath9k_htc_priv *priv);
void ath9k_deinit_leds(struct ath9k_htc_priv *priv);
+void ath9k_led_work(struct work_struct *work);
+#else
+static inline void ath9k_init_leds(struct ath9k_htc_priv *priv)
+{
+}
+
+static inline void ath9k_deinit_leds(struct ath9k_htc_priv *priv)
+{
+}
+
+static inline void ath9k_led_work(struct work_struct *work)
+{
+}
+#endif
int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
u16 devid, char *product, u32 drv_info);
@@ -528,15 +600,9 @@
int ath9k_htc_resume(struct htc_target *htc_handle);
#endif
#ifdef CONFIG_ATH9K_HTC_DEBUGFS
-int ath9k_htc_debug_create_root(void);
-void ath9k_htc_debug_remove_root(void);
int ath9k_htc_init_debug(struct ath_hw *ah);
-void ath9k_htc_exit_debug(struct ath_hw *ah);
#else
-static inline int ath9k_htc_debug_create_root(void) { return 0; };
-static inline void ath9k_htc_debug_remove_root(void) {};
static inline int ath9k_htc_init_debug(struct ath_hw *ah) { return 0; };
-static inline void ath9k_htc_exit_debug(struct ath_hw *ah) {};
#endif /* CONFIG_ATH9K_HTC_DEBUGFS */
#endif /* HTC_H */
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 8d1d879..0ded2c6 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -18,6 +18,50 @@
#define FUDGE 2
+void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
+{
+ struct ath_hw *ah = priv->ah;
+ struct ath9k_tx_queue_info qi, qi_be;
+
+ memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
+ memset(&qi_be, 0, sizeof(struct ath9k_tx_queue_info));
+
+ ath9k_hw_get_txq_props(ah, priv->beaconq, &qi);
+
+ if (priv->ah->opmode == NL80211_IFTYPE_AP) {
+ qi.tqi_aifs = 1;
+ qi.tqi_cwmin = 0;
+ qi.tqi_cwmax = 0;
+ } else if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) {
+ int qnum = priv->hwq_map[WME_AC_BE];
+
+ ath9k_hw_get_txq_props(ah, qnum, &qi_be);
+
+ qi.tqi_aifs = qi_be.tqi_aifs;
+
+ /*
+ * For WIFI Beacon Distribution
+ * Long slot time : 2x cwmin
+ * Short slot time : 4x cwmin
+ */
+ if (ah->slottime == ATH9K_SLOT_TIME_20)
+ qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
+ else
+ qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
+
+ qi.tqi_cwmax = qi_be.tqi_cwmax;
+
+ }
+
+ if (!ath9k_hw_set_txq_props(ah, priv->beaconq, &qi)) {
+ ath_err(ath9k_hw_common(ah),
+ "Unable to update beacon queue %u!\n", priv->beaconq);
+ } else {
+ ath9k_hw_resettxqueue(ah, priv->beaconq);
+ }
+}
+
+
static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
struct htc_beacon_config *bss_conf)
{
@@ -30,7 +74,7 @@
__be32 htc_imask = 0;
u64 tsf;
int num_beacons, offset, dtim_dec_count, cfp_dec_count;
- int ret;
+ int ret __attribute__ ((unused));
u8 cmd_rsp;
memset(&bs, 0, sizeof(bs));
@@ -146,7 +190,7 @@
enum ath9k_int imask = 0;
u32 nexttbtt, intval, tsftu;
__be32 htc_imask = 0;
- int ret;
+ int ret __attribute__ ((unused));
u8 cmd_rsp;
u64 tsf;
@@ -154,8 +198,17 @@
intval /= ATH9K_HTC_MAX_BCN_VIF;
nexttbtt = intval;
+ /*
+ * To reduce beacon misses under heavy TX load,
+ * set the beacon response time to a larger value.
+ */
+ if (intval > DEFAULT_SWBA_RESPONSE)
+ priv->ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
+ else
+ priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
+
if (priv->op_flags & OP_TSF_RESET) {
- intval |= ATH9K_BEACON_RESET_TSF;
+ ath9k_hw_reset_tsf(priv->ah);
priv->op_flags &= ~OP_TSF_RESET;
} else {
/*
@@ -168,18 +221,20 @@
} while (nexttbtt < tsftu);
}
- intval |= ATH9K_BEACON_ENA;
-
if (priv->op_flags & OP_ENABLE_BEACON)
imask |= ATH9K_INT_SWBA;
ath_dbg(common, ATH_DBG_CONFIG,
- "AP Beacon config, intval: %d, nexttbtt: %u imask: 0x%x\n",
- bss_conf->beacon_interval, nexttbtt, imask);
+ "AP Beacon config, intval: %d, nexttbtt: %u, resp_time: %d "
+ "imask: 0x%x\n",
+ bss_conf->beacon_interval, nexttbtt,
+ priv->ah->config.sw_beacon_response_time, imask);
+
+ ath9k_htc_beaconq_config(priv);
WMI_CMD(WMI_DISABLE_INTR_CMDID);
- ath9k_hw_beaconinit(priv->ah, nexttbtt, intval);
- priv->bmiss_cnt = 0;
+ ath9k_hw_beaconinit(priv->ah, TU_TO_USEC(nexttbtt), TU_TO_USEC(intval));
+ priv->cur_beacon_conf.bmiss_cnt = 0;
htc_imask = cpu_to_be32(imask);
WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
}
@@ -191,7 +246,7 @@
enum ath9k_int imask = 0;
u32 nexttbtt, intval, tsftu;
__be32 htc_imask = 0;
- int ret;
+ int ret __attribute__ ((unused));
u8 cmd_rsp;
u64 tsf;
@@ -207,17 +262,26 @@
nexttbtt += intval;
} while (nexttbtt < tsftu);
- intval |= ATH9K_BEACON_ENA;
+ /*
+ * Only one IBSS interfce is allowed.
+ */
+ if (intval > DEFAULT_SWBA_RESPONSE)
+ priv->ah->config.sw_beacon_response_time = DEFAULT_SWBA_RESPONSE;
+ else
+ priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
+
if (priv->op_flags & OP_ENABLE_BEACON)
imask |= ATH9K_INT_SWBA;
ath_dbg(common, ATH_DBG_CONFIG,
- "IBSS Beacon config, intval: %d, nexttbtt: %u, imask: 0x%x\n",
- bss_conf->beacon_interval, nexttbtt, imask);
+ "IBSS Beacon config, intval: %d, nexttbtt: %u, "
+ "resp_time: %d, imask: 0x%x\n",
+ bss_conf->beacon_interval, nexttbtt,
+ priv->ah->config.sw_beacon_response_time, imask);
WMI_CMD(WMI_DISABLE_INTR_CMDID);
- ath9k_hw_beaconinit(priv->ah, nexttbtt, intval);
- priv->bmiss_cnt = 0;
+ ath9k_hw_beaconinit(priv->ah, TU_TO_USEC(nexttbtt), TU_TO_USEC(intval));
+ priv->cur_beacon_conf.bmiss_cnt = 0;
htc_imask = cpu_to_be32(imask);
WMI_CMD_BUF(WMI_ENABLE_INTR_CMDID, &htc_imask);
}
@@ -228,38 +292,101 @@
dev_kfree_skb_any(skb);
}
-void ath9k_htc_swba(struct ath9k_htc_priv *priv, u8 beacon_pending)
+static void ath9k_htc_send_buffered(struct ath9k_htc_priv *priv,
+ int slot)
{
- struct ath9k_htc_vif *avp = (void *)priv->vif->drv_priv;
- struct tx_beacon_header beacon_hdr;
- struct ath9k_htc_tx_ctl tx_ctl;
- struct ieee80211_tx_info *info;
- struct sk_buff *beacon;
- u8 *tx_fhdr;
-
- memset(&beacon_hdr, 0, sizeof(struct tx_beacon_header));
- memset(&tx_ctl, 0, sizeof(struct ath9k_htc_tx_ctl));
-
- /* FIXME: Handle BMISS */
- if (beacon_pending != 0) {
- priv->bmiss_cnt++;
- return;
- }
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ieee80211_vif *vif;
+ struct sk_buff *skb;
+ struct ieee80211_hdr *hdr;
+ int padpos, padsize, ret, tx_slot;
spin_lock_bh(&priv->beacon_lock);
+ vif = priv->cur_beacon_conf.bslot[slot];
+
+ skb = ieee80211_get_buffered_bc(priv->hw, vif);
+
+ while(skb) {
+ hdr = (struct ieee80211_hdr *) skb->data;
+
+ padpos = ath9k_cmn_padpos(hdr->frame_control);
+ padsize = padpos & 3;
+ if (padsize && skb->len > padpos) {
+ if (skb_headroom(skb) < padsize) {
+ dev_kfree_skb_any(skb);
+ goto next;
+ }
+ skb_push(skb, padsize);
+ memmove(skb->data, skb->data + padsize, padpos);
+ }
+
+ tx_slot = ath9k_htc_tx_get_slot(priv);
+ if (tx_slot < 0) {
+ ath_dbg(common, ATH_DBG_XMIT, "No free CAB slot\n");
+ dev_kfree_skb_any(skb);
+ goto next;
+ }
+
+ ret = ath9k_htc_tx_start(priv, skb, tx_slot, true);
+ if (ret != 0) {
+ ath9k_htc_tx_clear_slot(priv, tx_slot);
+ dev_kfree_skb_any(skb);
+
+ ath_dbg(common, ATH_DBG_XMIT,
+ "Failed to send CAB frame\n");
+ } else {
+ spin_lock_bh(&priv->tx.tx_lock);
+ priv->tx.queued_cnt++;
+ spin_unlock_bh(&priv->tx.tx_lock);
+ }
+ next:
+ skb = ieee80211_get_buffered_bc(priv->hw, vif);
+ }
+
+ spin_unlock_bh(&priv->beacon_lock);
+}
+
+static void ath9k_htc_send_beacon(struct ath9k_htc_priv *priv,
+ int slot)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ieee80211_vif *vif;
+ struct ath9k_htc_vif *avp;
+ struct tx_beacon_header beacon_hdr;
+ struct ath9k_htc_tx_ctl *tx_ctl;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_mgmt *mgmt;
+ struct sk_buff *beacon;
+ u8 *tx_fhdr;
+ int ret;
+
+ memset(&beacon_hdr, 0, sizeof(struct tx_beacon_header));
+
+ spin_lock_bh(&priv->beacon_lock);
+
+ vif = priv->cur_beacon_conf.bslot[slot];
+ avp = (struct ath9k_htc_vif *)vif->drv_priv;
+
if (unlikely(priv->op_flags & OP_SCANNING)) {
spin_unlock_bh(&priv->beacon_lock);
return;
}
/* Get a new beacon */
- beacon = ieee80211_beacon_get(priv->hw, priv->vif);
+ beacon = ieee80211_beacon_get(priv->hw, vif);
if (!beacon) {
spin_unlock_bh(&priv->beacon_lock);
return;
}
+ /*
+ * Update the TSF adjust value here, the HW will
+ * add this value for every beacon.
+ */
+ mgmt = (struct ieee80211_mgmt *)beacon->data;
+ mgmt->u.beacon.timestamp = avp->tsfadjust;
+
info = IEEE80211_SKB_CB(beacon);
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
struct ieee80211_hdr *hdr =
@@ -269,45 +396,149 @@
hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
}
- tx_ctl.type = ATH9K_HTC_NORMAL;
+ tx_ctl = HTC_SKB_CB(beacon);
+ memset(tx_ctl, 0, sizeof(*tx_ctl));
+
+ tx_ctl->type = ATH9K_HTC_BEACON;
+ tx_ctl->epid = priv->beacon_ep;
+
beacon_hdr.vif_index = avp->index;
tx_fhdr = skb_push(beacon, sizeof(beacon_hdr));
memcpy(tx_fhdr, (u8 *) &beacon_hdr, sizeof(beacon_hdr));
- htc_send(priv->htc, beacon, priv->beacon_ep, &tx_ctl);
+ ret = htc_send(priv->htc, beacon);
+ if (ret != 0) {
+ if (ret == -ENOMEM) {
+ ath_dbg(common, ATH_DBG_BSTUCK,
+ "Failed to send beacon, no free TX buffer\n");
+ }
+ dev_kfree_skb_any(beacon);
+ }
spin_unlock_bh(&priv->beacon_lock);
}
-/* Currently, only for IBSS */
-void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
+static int ath9k_htc_choose_bslot(struct ath9k_htc_priv *priv,
+ struct wmi_event_swba *swba)
{
- struct ath_hw *ah = priv->ah;
- struct ath9k_tx_queue_info qi, qi_be;
- int qnum = priv->hwq_map[WME_AC_BE];
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ u64 tsf;
+ u32 tsftu;
+ u16 intval;
+ int slot;
- memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
- memset(&qi_be, 0, sizeof(struct ath9k_tx_queue_info));
+ intval = priv->cur_beacon_conf.beacon_interval & ATH9K_BEACON_PERIOD;
- ath9k_hw_get_txq_props(ah, qnum, &qi_be);
+ tsf = be64_to_cpu(swba->tsf);
+ tsftu = TSF_TO_TU(tsf >> 32, tsf);
+ slot = ((tsftu % intval) * ATH9K_HTC_MAX_BCN_VIF) / intval;
+ slot = ATH9K_HTC_MAX_BCN_VIF - slot - 1;
- qi.tqi_aifs = qi_be.tqi_aifs;
- /* For WIFI Beacon Distribution
- * Long slot time : 2x cwmin
- * Short slot time : 4x cwmin
- */
- if (ah->slottime == ATH9K_SLOT_TIME_20)
- qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
- else
- qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
- qi.tqi_cwmax = qi_be.tqi_cwmax;
+ ath_dbg(common, ATH_DBG_BEACON,
+ "Choose slot: %d, tsf: %llu, tsftu: %u, intval: %u\n",
+ slot, tsf, tsftu, intval);
- if (!ath9k_hw_set_txq_props(ah, priv->beaconq, &qi)) {
- ath_err(ath9k_hw_common(ah),
- "Unable to update beacon queue %u!\n", qnum);
- } else {
- ath9k_hw_resettxqueue(ah, priv->beaconq);
+ return slot;
+}
+
+void ath9k_htc_swba(struct ath9k_htc_priv *priv,
+ struct wmi_event_swba *swba)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ int slot;
+
+ if (swba->beacon_pending != 0) {
+ priv->cur_beacon_conf.bmiss_cnt++;
+ if (priv->cur_beacon_conf.bmiss_cnt > BSTUCK_THRESHOLD) {
+ ath_dbg(common, ATH_DBG_BSTUCK,
+ "Beacon stuck, HW reset\n");
+ ieee80211_queue_work(priv->hw,
+ &priv->fatal_work);
+ }
+ return;
}
+
+ if (priv->cur_beacon_conf.bmiss_cnt) {
+ ath_dbg(common, ATH_DBG_BSTUCK,
+ "Resuming beacon xmit after %u misses\n",
+ priv->cur_beacon_conf.bmiss_cnt);
+ priv->cur_beacon_conf.bmiss_cnt = 0;
+ }
+
+ slot = ath9k_htc_choose_bslot(priv, swba);
+ spin_lock_bh(&priv->beacon_lock);
+ if (priv->cur_beacon_conf.bslot[slot] == NULL) {
+ spin_unlock_bh(&priv->beacon_lock);
+ return;
+ }
+ spin_unlock_bh(&priv->beacon_lock);
+
+ ath9k_htc_send_buffered(priv, slot);
+ ath9k_htc_send_beacon(priv, slot);
+}
+
+void ath9k_htc_assign_bslot(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *)vif->drv_priv;
+ int i = 0;
+
+ spin_lock_bh(&priv->beacon_lock);
+ for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++) {
+ if (priv->cur_beacon_conf.bslot[i] == NULL) {
+ avp->bslot = i;
+ break;
+ }
+ }
+
+ priv->cur_beacon_conf.bslot[avp->bslot] = vif;
+ spin_unlock_bh(&priv->beacon_lock);
+
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Added interface at beacon slot: %d\n", avp->bslot);
+}
+
+void ath9k_htc_remove_bslot(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *)vif->drv_priv;
+
+ spin_lock_bh(&priv->beacon_lock);
+ priv->cur_beacon_conf.bslot[avp->bslot] = NULL;
+ spin_unlock_bh(&priv->beacon_lock);
+
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Removed interface at beacon slot: %d\n", avp->bslot);
+}
+
+/*
+ * Calculate the TSF adjustment value for all slots
+ * other than zero.
+ */
+void ath9k_htc_set_tsfadjust(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *)vif->drv_priv;
+ struct htc_beacon_config *cur_conf = &priv->cur_beacon_conf;
+ u64 tsfadjust;
+
+ if (avp->bslot == 0)
+ return;
+
+ /*
+ * The beacon interval cannot be different for multi-AP mode,
+ * and we reach here only for VIF slots greater than zero,
+ * so beacon_interval is guaranteed to be set in cur_conf.
+ */
+ tsfadjust = cur_conf->beacon_interval * avp->bslot / ATH9K_HTC_MAX_BCN_VIF;
+ avp->tsfadjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
+
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "tsfadjust is: %llu for bslot: %d\n",
+ (unsigned long long)tsfadjust, avp->bslot);
}
static void ath9k_htc_beacon_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_debug.c b/drivers/net/wireless/ath/ath9k/htc_drv_debug.c
new file mode 100644
index 0000000..aa48b3ab
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_debug.c
@@ -0,0 +1,960 @@
+/*
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "htc.h"
+
+static int ath9k_debugfs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t read_file_tgt_int_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct ath9k_htc_target_int_stats cmd_rsp;
+ char buf[512];
+ unsigned int len = 0;
+ int ret = 0;
+
+ memset(&cmd_rsp, 0, sizeof(cmd_rsp));
+
+ ath9k_htc_ps_wakeup(priv);
+
+ WMI_CMD(WMI_INT_STATS_CMDID);
+ if (ret) {
+ ath9k_htc_ps_restore(priv);
+ return -EINVAL;
+ }
+
+ ath9k_htc_ps_restore(priv);
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "RX",
+ be32_to_cpu(cmd_rsp.rx));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "RXORN",
+ be32_to_cpu(cmd_rsp.rxorn));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "RXEOL",
+ be32_to_cpu(cmd_rsp.rxeol));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "TXURN",
+ be32_to_cpu(cmd_rsp.txurn));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "TXTO",
+ be32_to_cpu(cmd_rsp.txto));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "CST",
+ be32_to_cpu(cmd_rsp.cst));
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_tgt_int_stats = {
+ .read = read_file_tgt_int_stats,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_tgt_tx_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct ath9k_htc_target_tx_stats cmd_rsp;
+ char buf[512];
+ unsigned int len = 0;
+ int ret = 0;
+
+ memset(&cmd_rsp, 0, sizeof(cmd_rsp));
+
+ ath9k_htc_ps_wakeup(priv);
+
+ WMI_CMD(WMI_TX_STATS_CMDID);
+ if (ret) {
+ ath9k_htc_ps_restore(priv);
+ return -EINVAL;
+ }
+
+ ath9k_htc_ps_restore(priv);
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "Xretries",
+ be32_to_cpu(cmd_rsp.xretries));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "FifoErr",
+ be32_to_cpu(cmd_rsp.fifoerr));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "Filtered",
+ be32_to_cpu(cmd_rsp.filtered));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "TimerExp",
+ be32_to_cpu(cmd_rsp.timer_exp));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "ShortRetries",
+ be32_to_cpu(cmd_rsp.shortretries));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "LongRetries",
+ be32_to_cpu(cmd_rsp.longretries));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "QueueNull",
+ be32_to_cpu(cmd_rsp.qnull));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "EncapFail",
+ be32_to_cpu(cmd_rsp.encap_fail));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "NoBuf",
+ be32_to_cpu(cmd_rsp.nobuf));
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_tgt_tx_stats = {
+ .read = read_file_tgt_tx_stats,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_tgt_rx_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct ath9k_htc_target_rx_stats cmd_rsp;
+ char buf[512];
+ unsigned int len = 0;
+ int ret = 0;
+
+ memset(&cmd_rsp, 0, sizeof(cmd_rsp));
+
+ ath9k_htc_ps_wakeup(priv);
+
+ WMI_CMD(WMI_RX_STATS_CMDID);
+ if (ret) {
+ ath9k_htc_ps_restore(priv);
+ return -EINVAL;
+ }
+
+ ath9k_htc_ps_restore(priv);
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "NoBuf",
+ be32_to_cpu(cmd_rsp.nobuf));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "HostSend",
+ be32_to_cpu(cmd_rsp.host_send));
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "HostDone",
+ be32_to_cpu(cmd_rsp.host_done));
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_tgt_rx_stats = {
+ .read = read_file_tgt_rx_stats,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ char buf[512];
+ unsigned int len = 0;
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "Buffers queued",
+ priv->debug.tx_stats.buf_queued);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "Buffers completed",
+ priv->debug.tx_stats.buf_completed);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "SKBs queued",
+ priv->debug.tx_stats.skb_queued);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "SKBs success",
+ priv->debug.tx_stats.skb_success);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "SKBs failed",
+ priv->debug.tx_stats.skb_failed);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "CAB queued",
+ priv->debug.tx_stats.cab_queued);
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "BE queued",
+ priv->debug.tx_stats.queue_stats[WME_AC_BE]);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "BK queued",
+ priv->debug.tx_stats.queue_stats[WME_AC_BK]);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "VI queued",
+ priv->debug.tx_stats.queue_stats[WME_AC_VI]);
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%20s : %10u\n", "VO queued",
+ priv->debug.tx_stats.queue_stats[WME_AC_VO]);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_xmit = {
+ .read = read_file_xmit,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
+ struct ath_htc_rx_status *rxs)
+{
+#define RX_PHY_ERR_INC(c) priv->debug.rx_stats.err_phy_stats[c]++
+
+ if (rxs->rs_status & ATH9K_RXERR_CRC)
+ priv->debug.rx_stats.err_crc++;
+ if (rxs->rs_status & ATH9K_RXERR_DECRYPT)
+ priv->debug.rx_stats.err_decrypt_crc++;
+ if (rxs->rs_status & ATH9K_RXERR_MIC)
+ priv->debug.rx_stats.err_mic++;
+ if (rxs->rs_status & ATH9K_RX_DELIM_CRC_PRE)
+ priv->debug.rx_stats.err_pre_delim++;
+ if (rxs->rs_status & ATH9K_RX_DELIM_CRC_POST)
+ priv->debug.rx_stats.err_post_delim++;
+ if (rxs->rs_status & ATH9K_RX_DECRYPT_BUSY)
+ priv->debug.rx_stats.err_decrypt_busy++;
+
+ if (rxs->rs_status & ATH9K_RXERR_PHY) {
+ priv->debug.rx_stats.err_phy++;
+ if (rxs->rs_phyerr < ATH9K_PHYERR_MAX)
+ RX_PHY_ERR_INC(rxs->rs_phyerr);
+ }
+
+#undef RX_PHY_ERR_INC
+}
+
+static ssize_t read_file_recv(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+#define PHY_ERR(s, p) \
+ len += snprintf(buf + len, size - len, "%20s : %10u\n", s, \
+ priv->debug.rx_stats.err_phy_stats[p]);
+
+ struct ath9k_htc_priv *priv = file->private_data;
+ char *buf;
+ unsigned int len = 0, size = 1500;
+ ssize_t retval = 0;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "SKBs allocated",
+ priv->debug.rx_stats.skb_allocated);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "SKBs completed",
+ priv->debug.rx_stats.skb_completed);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "SKBs Dropped",
+ priv->debug.rx_stats.skb_dropped);
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "CRC ERR",
+ priv->debug.rx_stats.err_crc);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "DECRYPT CRC ERR",
+ priv->debug.rx_stats.err_decrypt_crc);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "MIC ERR",
+ priv->debug.rx_stats.err_mic);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "PRE-DELIM CRC ERR",
+ priv->debug.rx_stats.err_pre_delim);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "POST-DELIM CRC ERR",
+ priv->debug.rx_stats.err_post_delim);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "DECRYPT BUSY ERR",
+ priv->debug.rx_stats.err_decrypt_busy);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10u\n", "TOTAL PHY ERR",
+ priv->debug.rx_stats.err_phy);
+
+
+ PHY_ERR("UNDERRUN", ATH9K_PHYERR_UNDERRUN);
+ PHY_ERR("TIMING", ATH9K_PHYERR_TIMING);
+ PHY_ERR("PARITY", ATH9K_PHYERR_PARITY);
+ PHY_ERR("RATE", ATH9K_PHYERR_RATE);
+ PHY_ERR("LENGTH", ATH9K_PHYERR_LENGTH);
+ PHY_ERR("RADAR", ATH9K_PHYERR_RADAR);
+ PHY_ERR("SERVICE", ATH9K_PHYERR_SERVICE);
+ PHY_ERR("TOR", ATH9K_PHYERR_TOR);
+ PHY_ERR("OFDM-TIMING", ATH9K_PHYERR_OFDM_TIMING);
+ PHY_ERR("OFDM-SIGNAL-PARITY", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
+ PHY_ERR("OFDM-RATE", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
+ PHY_ERR("OFDM-LENGTH", ATH9K_PHYERR_OFDM_LENGTH_ILLEGAL);
+ PHY_ERR("OFDM-POWER-DROP", ATH9K_PHYERR_OFDM_POWER_DROP);
+ PHY_ERR("OFDM-SERVICE", ATH9K_PHYERR_OFDM_SERVICE);
+ PHY_ERR("OFDM-RESTART", ATH9K_PHYERR_OFDM_RESTART);
+ PHY_ERR("FALSE-RADAR-EXT", ATH9K_PHYERR_FALSE_RADAR_EXT);
+ PHY_ERR("CCK-TIMING", ATH9K_PHYERR_CCK_TIMING);
+ PHY_ERR("CCK-HEADER-CRC", ATH9K_PHYERR_CCK_HEADER_CRC);
+ PHY_ERR("CCK-RATE", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
+ PHY_ERR("CCK-SERVICE", ATH9K_PHYERR_CCK_SERVICE);
+ PHY_ERR("CCK-RESTART", ATH9K_PHYERR_CCK_RESTART);
+ PHY_ERR("CCK-LENGTH", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
+ PHY_ERR("CCK-POWER-DROP", ATH9K_PHYERR_CCK_POWER_DROP);
+ PHY_ERR("HT-CRC", ATH9K_PHYERR_HT_CRC_ERROR);
+ PHY_ERR("HT-LENGTH", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
+ PHY_ERR("HT-RATE", ATH9K_PHYERR_HT_RATE_ILLEGAL);
+
+ if (len > size)
+ len = size;
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+
+#undef PHY_ERR
+}
+
+static const struct file_operations fops_recv = {
+ .read = read_file_recv,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_slot(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ char buf[512];
+ unsigned int len = 0;
+
+ spin_lock_bh(&priv->tx.tx_lock);
+
+ len += snprintf(buf + len, sizeof(buf) - len, "TX slot bitmap : ");
+
+ len += bitmap_scnprintf(buf + len, sizeof(buf) - len,
+ priv->tx.tx_slot, MAX_TX_BUF_NUM);
+
+ len += snprintf(buf + len, sizeof(buf) - len, "\n");
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "Used slots : %d\n",
+ bitmap_weight(priv->tx.tx_slot, MAX_TX_BUF_NUM));
+
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_slot = {
+ .read = read_file_slot,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_queue(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ char buf[512];
+ unsigned int len = 0;
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Mgmt endpoint", skb_queue_len(&priv->tx.mgmt_ep_queue));
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Cab endpoint", skb_queue_len(&priv->tx.cab_ep_queue));
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Data BE endpoint", skb_queue_len(&priv->tx.data_be_queue));
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Data BK endpoint", skb_queue_len(&priv->tx.data_bk_queue));
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Data VI endpoint", skb_queue_len(&priv->tx.data_vi_queue));
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Data VO endpoint", skb_queue_len(&priv->tx.data_vo_queue));
+
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Failed queue", skb_queue_len(&priv->tx.tx_failed));
+
+ spin_lock_bh(&priv->tx.tx_lock);
+ len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n",
+ "Queued count", priv->tx.queued_cnt);
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+
+}
+
+static const struct file_operations fops_queue = {
+ .read = read_file_queue,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_debug(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "0x%08x\n", common->debug_mask);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_debug(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ unsigned long mask;
+ char buf[32];
+ ssize_t len;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ buf[len] = '\0';
+ if (strict_strtoul(buf, 0, &mask))
+ return -EINVAL;
+
+ common->debug_mask = mask;
+ return count;
+}
+
+static const struct file_operations fops_debug = {
+ .read = read_file_debug,
+ .write = write_file_debug,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct base_eep_header *pBase = NULL;
+ unsigned int len = 0, size = 1500;
+ ssize_t retval = 0;
+ char *buf;
+
+ /*
+ * This can be done since all the 3 EEPROM families have the
+ * same base header upto a certain point, and we are interested in
+ * the data only upto that point.
+ */
+
+ if (AR_SREV_9271(priv->ah))
+ pBase = (struct base_eep_header *)
+ &priv->ah->eeprom.map4k.baseEepHeader;
+ else if (priv->ah->hw_version.usbdev == AR9280_USB)
+ pBase = (struct base_eep_header *)
+ &priv->ah->eeprom.def.baseEepHeader;
+ else if (priv->ah->hw_version.usbdev == AR9287_USB)
+ pBase = (struct base_eep_header *)
+ &priv->ah->eeprom.map9287.baseEepHeader;
+
+ if (pBase == NULL) {
+ ath_err(common, "Unknown EEPROM type\n");
+ return 0;
+ }
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n", "Major Version",
+ pBase->version >> 12);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n", "Minor Version",
+ pBase->version & 0xFFF);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n", "Checksum",
+ pBase->checksum);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n", "Length",
+ pBase->length);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n", "RegDomain1",
+ pBase->regDmn[0]);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n", "RegDomain2",
+ pBase->regDmn[1]);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "TX Mask", pBase->txMask);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "RX Mask", pBase->rxMask);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Allow 5GHz",
+ !!(pBase->opCapFlags & AR5416_OPFLAGS_11A));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Allow 2GHz",
+ !!(pBase->opCapFlags & AR5416_OPFLAGS_11G));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Disable 2GHz HT20",
+ !!(pBase->opCapFlags & AR5416_OPFLAGS_N_2G_HT20));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Disable 2GHz HT40",
+ !!(pBase->opCapFlags & AR5416_OPFLAGS_N_2G_HT40));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Disable 5Ghz HT20",
+ !!(pBase->opCapFlags & AR5416_OPFLAGS_N_5G_HT20));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Disable 5Ghz HT40",
+ !!(pBase->opCapFlags & AR5416_OPFLAGS_N_5G_HT40));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Big Endian",
+ !!(pBase->eepMisc & 0x01));
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Cal Bin Major Ver",
+ (pBase->binBuildNumber >> 24) & 0xFF);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Cal Bin Minor Ver",
+ (pBase->binBuildNumber >> 16) & 0xFF);
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "Cal Bin Build",
+ (pBase->binBuildNumber >> 8) & 0xFF);
+
+ /*
+ * UB91 specific data.
+ */
+ if (AR_SREV_9271(priv->ah)) {
+ struct base_eep_header_4k *pBase4k =
+ &priv->ah->eeprom.map4k.baseEepHeader;
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "TX Gain type",
+ pBase4k->txGainType);
+ }
+
+ /*
+ * UB95 specific data.
+ */
+ if (priv->ah->hw_version.usbdev == AR9287_USB) {
+ struct base_eep_ar9287_header *pBase9287 =
+ &priv->ah->eeprom.map9287.baseEepHeader;
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %10ddB\n",
+ "Power Table Offset",
+ pBase9287->pwrTableOffset);
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %10d\n",
+ "OpenLoop Power Ctrl",
+ pBase9287->openLoopPwrCntl);
+ }
+
+ len += snprintf(buf + len, size - len,
+ "%20s : %02X:%02X:%02X:%02X:%02X:%02X\n",
+ "MacAddress",
+ pBase->macAddr[0], pBase->macAddr[1], pBase->macAddr[2],
+ pBase->macAddr[3], pBase->macAddr[4], pBase->macAddr[5]);
+ if (len > size)
+ len = size;
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+}
+
+static const struct file_operations fops_base_eeprom = {
+ .read = read_file_base_eeprom,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_4k_modal_eeprom(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+#define PR_EEP(_s, _val) \
+ do { \
+ len += snprintf(buf + len, size - len, "%20s : %10d\n", \
+ _s, (_val)); \
+ } while (0)
+
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct modal_eep_4k_header *pModal = &priv->ah->eeprom.map4k.modalHeader;
+ unsigned int len = 0, size = 2048;
+ ssize_t retval = 0;
+ char *buf;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ PR_EEP("Chain0 Ant. Control", pModal->antCtrlChain[0]);
+ PR_EEP("Ant. Common Control", pModal->antCtrlCommon);
+ PR_EEP("Chain0 Ant. Gain", pModal->antennaGainCh[0]);
+ PR_EEP("Switch Settle", pModal->switchSettling);
+ PR_EEP("Chain0 TxRxAtten", pModal->txRxAttenCh[0]);
+ PR_EEP("Chain0 RxTxMargin", pModal->rxTxMarginCh[0]);
+ PR_EEP("ADC Desired size", pModal->adcDesiredSize);
+ PR_EEP("PGA Desired size", pModal->pgaDesiredSize);
+ PR_EEP("Chain0 xlna Gain", pModal->xlnaGainCh[0]);
+ PR_EEP("txEndToXpaOff", pModal->txEndToXpaOff);
+ PR_EEP("txEndToRxOn", pModal->txEndToRxOn);
+ PR_EEP("txFrameToXpaOn", pModal->txFrameToXpaOn);
+ PR_EEP("CCA Threshold)", pModal->thresh62);
+ PR_EEP("Chain0 NF Threshold", pModal->noiseFloorThreshCh[0]);
+ PR_EEP("xpdGain", pModal->xpdGain);
+ PR_EEP("External PD", pModal->xpd);
+ PR_EEP("Chain0 I Coefficient", pModal->iqCalICh[0]);
+ PR_EEP("Chain0 Q Coefficient", pModal->iqCalQCh[0]);
+ PR_EEP("pdGainOverlap", pModal->pdGainOverlap);
+ PR_EEP("O/D Bias Version", pModal->version);
+ PR_EEP("CCK OutputBias", pModal->ob_0);
+ PR_EEP("BPSK OutputBias", pModal->ob_1);
+ PR_EEP("QPSK OutputBias", pModal->ob_2);
+ PR_EEP("16QAM OutputBias", pModal->ob_3);
+ PR_EEP("64QAM OutputBias", pModal->ob_4);
+ PR_EEP("CCK Driver1_Bias", pModal->db1_0);
+ PR_EEP("BPSK Driver1_Bias", pModal->db1_1);
+ PR_EEP("QPSK Driver1_Bias", pModal->db1_2);
+ PR_EEP("16QAM Driver1_Bias", pModal->db1_3);
+ PR_EEP("64QAM Driver1_Bias", pModal->db1_4);
+ PR_EEP("CCK Driver2_Bias", pModal->db2_0);
+ PR_EEP("BPSK Driver2_Bias", pModal->db2_1);
+ PR_EEP("QPSK Driver2_Bias", pModal->db2_2);
+ PR_EEP("16QAM Driver2_Bias", pModal->db2_3);
+ PR_EEP("64QAM Driver2_Bias", pModal->db2_4);
+ PR_EEP("xPA Bias Level", pModal->xpaBiasLvl);
+ PR_EEP("txFrameToDataStart", pModal->txFrameToDataStart);
+ PR_EEP("txFrameToPaOn", pModal->txFrameToPaOn);
+ PR_EEP("HT40 Power Inc.", pModal->ht40PowerIncForPdadc);
+ PR_EEP("Chain0 bswAtten", pModal->bswAtten[0]);
+ PR_EEP("Chain0 bswMargin", pModal->bswMargin[0]);
+ PR_EEP("HT40 Switch Settle", pModal->swSettleHt40);
+ PR_EEP("Chain0 xatten2Db", pModal->xatten2Db[0]);
+ PR_EEP("Chain0 xatten2Margin", pModal->xatten2Margin[0]);
+ PR_EEP("Ant. Diversity ctl1", pModal->antdiv_ctl1);
+ PR_EEP("Ant. Diversity ctl2", pModal->antdiv_ctl2);
+ PR_EEP("TX Diversity", pModal->tx_diversity);
+
+ if (len > size)
+ len = size;
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+
+#undef PR_EEP
+}
+
+static ssize_t read_def_modal_eeprom(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+#define PR_EEP(_s, _val) \
+ do { \
+ if (pBase->opCapFlags & AR5416_OPFLAGS_11G) { \
+ pModal = &priv->ah->eeprom.def.modalHeader[1]; \
+ len += snprintf(buf + len, size - len, "%20s : %8d%7s", \
+ _s, (_val), "|"); \
+ } \
+ if (pBase->opCapFlags & AR5416_OPFLAGS_11A) { \
+ pModal = &priv->ah->eeprom.def.modalHeader[0]; \
+ len += snprintf(buf + len, size - len, "%9d\n", \
+ (_val)); \
+ } \
+ } while (0)
+
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct base_eep_header *pBase = &priv->ah->eeprom.def.baseEepHeader;
+ struct modal_eep_header *pModal = NULL;
+ unsigned int len = 0, size = 3500;
+ ssize_t retval = 0;
+ char *buf;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ len += snprintf(buf + len, size - len,
+ "%31s %15s\n", "2G", "5G");
+ len += snprintf(buf + len, size - len,
+ "%32s %16s\n", "====", "====\n");
+
+ PR_EEP("Chain0 Ant. Control", pModal->antCtrlChain[0]);
+ PR_EEP("Chain1 Ant. Control", pModal->antCtrlChain[1]);
+ PR_EEP("Chain2 Ant. Control", pModal->antCtrlChain[2]);
+ PR_EEP("Ant. Common Control", pModal->antCtrlCommon);
+ PR_EEP("Chain0 Ant. Gain", pModal->antennaGainCh[0]);
+ PR_EEP("Chain1 Ant. Gain", pModal->antennaGainCh[1]);
+ PR_EEP("Chain2 Ant. Gain", pModal->antennaGainCh[2]);
+ PR_EEP("Switch Settle", pModal->switchSettling);
+ PR_EEP("Chain0 TxRxAtten", pModal->txRxAttenCh[0]);
+ PR_EEP("Chain1 TxRxAtten", pModal->txRxAttenCh[1]);
+ PR_EEP("Chain2 TxRxAtten", pModal->txRxAttenCh[2]);
+ PR_EEP("Chain0 RxTxMargin", pModal->rxTxMarginCh[0]);
+ PR_EEP("Chain1 RxTxMargin", pModal->rxTxMarginCh[1]);
+ PR_EEP("Chain2 RxTxMargin", pModal->rxTxMarginCh[2]);
+ PR_EEP("ADC Desired size", pModal->adcDesiredSize);
+ PR_EEP("PGA Desired size", pModal->pgaDesiredSize);
+ PR_EEP("Chain0 xlna Gain", pModal->xlnaGainCh[0]);
+ PR_EEP("Chain1 xlna Gain", pModal->xlnaGainCh[1]);
+ PR_EEP("Chain2 xlna Gain", pModal->xlnaGainCh[2]);
+ PR_EEP("txEndToXpaOff", pModal->txEndToXpaOff);
+ PR_EEP("txEndToRxOn", pModal->txEndToRxOn);
+ PR_EEP("txFrameToXpaOn", pModal->txFrameToXpaOn);
+ PR_EEP("CCA Threshold)", pModal->thresh62);
+ PR_EEP("Chain0 NF Threshold", pModal->noiseFloorThreshCh[0]);
+ PR_EEP("Chain1 NF Threshold", pModal->noiseFloorThreshCh[1]);
+ PR_EEP("Chain2 NF Threshold", pModal->noiseFloorThreshCh[2]);
+ PR_EEP("xpdGain", pModal->xpdGain);
+ PR_EEP("External PD", pModal->xpd);
+ PR_EEP("Chain0 I Coefficient", pModal->iqCalICh[0]);
+ PR_EEP("Chain1 I Coefficient", pModal->iqCalICh[1]);
+ PR_EEP("Chain2 I Coefficient", pModal->iqCalICh[2]);
+ PR_EEP("Chain0 Q Coefficient", pModal->iqCalQCh[0]);
+ PR_EEP("Chain1 Q Coefficient", pModal->iqCalQCh[1]);
+ PR_EEP("Chain2 Q Coefficient", pModal->iqCalQCh[2]);
+ PR_EEP("pdGainOverlap", pModal->pdGainOverlap);
+ PR_EEP("Chain0 OutputBias", pModal->ob);
+ PR_EEP("Chain0 DriverBias", pModal->db);
+ PR_EEP("xPA Bias Level", pModal->xpaBiasLvl);
+ PR_EEP("2chain pwr decrease", pModal->pwrDecreaseFor2Chain);
+ PR_EEP("3chain pwr decrease", pModal->pwrDecreaseFor3Chain);
+ PR_EEP("txFrameToDataStart", pModal->txFrameToDataStart);
+ PR_EEP("txFrameToPaOn", pModal->txFrameToPaOn);
+ PR_EEP("HT40 Power Inc.", pModal->ht40PowerIncForPdadc);
+ PR_EEP("Chain0 bswAtten", pModal->bswAtten[0]);
+ PR_EEP("Chain1 bswAtten", pModal->bswAtten[1]);
+ PR_EEP("Chain2 bswAtten", pModal->bswAtten[2]);
+ PR_EEP("Chain0 bswMargin", pModal->bswMargin[0]);
+ PR_EEP("Chain1 bswMargin", pModal->bswMargin[1]);
+ PR_EEP("Chain2 bswMargin", pModal->bswMargin[2]);
+ PR_EEP("HT40 Switch Settle", pModal->swSettleHt40);
+ PR_EEP("Chain0 xatten2Db", pModal->xatten2Db[0]);
+ PR_EEP("Chain1 xatten2Db", pModal->xatten2Db[1]);
+ PR_EEP("Chain2 xatten2Db", pModal->xatten2Db[2]);
+ PR_EEP("Chain0 xatten2Margin", pModal->xatten2Margin[0]);
+ PR_EEP("Chain1 xatten2Margin", pModal->xatten2Margin[1]);
+ PR_EEP("Chain2 xatten2Margin", pModal->xatten2Margin[2]);
+ PR_EEP("Chain1 OutputBias", pModal->ob_ch1);
+ PR_EEP("Chain1 DriverBias", pModal->db_ch1);
+ PR_EEP("LNA Control", pModal->lna_ctl);
+ PR_EEP("XPA Bias Freq0", pModal->xpaBiasLvlFreq[0]);
+ PR_EEP("XPA Bias Freq1", pModal->xpaBiasLvlFreq[1]);
+ PR_EEP("XPA Bias Freq2", pModal->xpaBiasLvlFreq[2]);
+
+ if (len > size)
+ len = size;
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+
+#undef PR_EEP
+}
+
+static ssize_t read_9287_modal_eeprom(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+#define PR_EEP(_s, _val) \
+ do { \
+ len += snprintf(buf + len, size - len, "%20s : %10d\n", \
+ _s, (_val)); \
+ } while (0)
+
+ struct ath9k_htc_priv *priv = file->private_data;
+ struct modal_eep_ar9287_header *pModal = &priv->ah->eeprom.map9287.modalHeader;
+ unsigned int len = 0, size = 3000;
+ ssize_t retval = 0;
+ char *buf;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ PR_EEP("Chain0 Ant. Control", pModal->antCtrlChain[0]);
+ PR_EEP("Chain1 Ant. Control", pModal->antCtrlChain[1]);
+ PR_EEP("Ant. Common Control", pModal->antCtrlCommon);
+ PR_EEP("Chain0 Ant. Gain", pModal->antennaGainCh[0]);
+ PR_EEP("Chain1 Ant. Gain", pModal->antennaGainCh[1]);
+ PR_EEP("Switch Settle", pModal->switchSettling);
+ PR_EEP("Chain0 TxRxAtten", pModal->txRxAttenCh[0]);
+ PR_EEP("Chain1 TxRxAtten", pModal->txRxAttenCh[1]);
+ PR_EEP("Chain0 RxTxMargin", pModal->rxTxMarginCh[0]);
+ PR_EEP("Chain1 RxTxMargin", pModal->rxTxMarginCh[1]);
+ PR_EEP("ADC Desired size", pModal->adcDesiredSize);
+ PR_EEP("txEndToXpaOff", pModal->txEndToXpaOff);
+ PR_EEP("txEndToRxOn", pModal->txEndToRxOn);
+ PR_EEP("txFrameToXpaOn", pModal->txFrameToXpaOn);
+ PR_EEP("CCA Threshold)", pModal->thresh62);
+ PR_EEP("Chain0 NF Threshold", pModal->noiseFloorThreshCh[0]);
+ PR_EEP("Chain1 NF Threshold", pModal->noiseFloorThreshCh[1]);
+ PR_EEP("xpdGain", pModal->xpdGain);
+ PR_EEP("External PD", pModal->xpd);
+ PR_EEP("Chain0 I Coefficient", pModal->iqCalICh[0]);
+ PR_EEP("Chain1 I Coefficient", pModal->iqCalICh[1]);
+ PR_EEP("Chain0 Q Coefficient", pModal->iqCalQCh[0]);
+ PR_EEP("Chain1 Q Coefficient", pModal->iqCalQCh[1]);
+ PR_EEP("pdGainOverlap", pModal->pdGainOverlap);
+ PR_EEP("xPA Bias Level", pModal->xpaBiasLvl);
+ PR_EEP("txFrameToDataStart", pModal->txFrameToDataStart);
+ PR_EEP("txFrameToPaOn", pModal->txFrameToPaOn);
+ PR_EEP("HT40 Power Inc.", pModal->ht40PowerIncForPdadc);
+ PR_EEP("Chain0 bswAtten", pModal->bswAtten[0]);
+ PR_EEP("Chain1 bswAtten", pModal->bswAtten[1]);
+ PR_EEP("Chain0 bswMargin", pModal->bswMargin[0]);
+ PR_EEP("Chain1 bswMargin", pModal->bswMargin[1]);
+ PR_EEP("HT40 Switch Settle", pModal->swSettleHt40);
+ PR_EEP("AR92x7 Version", pModal->version);
+ PR_EEP("DriverBias1", pModal->db1);
+ PR_EEP("DriverBias2", pModal->db1);
+ PR_EEP("CCK OutputBias", pModal->ob_cck);
+ PR_EEP("PSK OutputBias", pModal->ob_psk);
+ PR_EEP("QAM OutputBias", pModal->ob_qam);
+ PR_EEP("PAL_OFF OutputBias", pModal->ob_pal_off);
+
+ if (len > size)
+ len = size;
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+
+#undef PR_EEP
+}
+
+static ssize_t read_file_modal_eeprom(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath9k_htc_priv *priv = file->private_data;
+
+ if (AR_SREV_9271(priv->ah))
+ return read_4k_modal_eeprom(file, user_buf, count, ppos);
+ else if (priv->ah->hw_version.usbdev == AR9280_USB)
+ return read_def_modal_eeprom(file, user_buf, count, ppos);
+ else if (priv->ah->hw_version.usbdev == AR9287_USB)
+ return read_9287_modal_eeprom(file, user_buf, count, ppos);
+
+ return 0;
+}
+
+static const struct file_operations fops_modal_eeprom = {
+ .read = read_file_modal_eeprom,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+int ath9k_htc_init_debug(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
+
+ priv->debug.debugfs_phy = debugfs_create_dir(KBUILD_MODNAME,
+ priv->hw->wiphy->debugfsdir);
+ if (!priv->debug.debugfs_phy)
+ return -ENOMEM;
+
+ debugfs_create_file("tgt_int_stats", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_tgt_int_stats);
+ debugfs_create_file("tgt_tx_stats", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_tgt_tx_stats);
+ debugfs_create_file("tgt_rx_stats", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_tgt_rx_stats);
+ debugfs_create_file("xmit", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_xmit);
+ debugfs_create_file("recv", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_recv);
+ debugfs_create_file("slot", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_slot);
+ debugfs_create_file("queue", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_queue);
+ debugfs_create_file("debug", S_IRUSR | S_IWUSR, priv->debug.debugfs_phy,
+ priv, &fops_debug);
+ debugfs_create_file("base_eeprom", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_base_eeprom);
+ debugfs_create_file("modal_eeprom", S_IRUSR, priv->debug.debugfs_phy,
+ priv, &fops_modal_eeprom);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
index 7e630a8..af57fe5 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -65,17 +65,19 @@
u32 timer_period;
bool is_btscan;
int ret;
- u8 cmd_rsp, aggr;
ath_detect_bt_priority(priv);
is_btscan = !!(priv->op_flags & OP_BT_SCAN);
- aggr = priv->op_flags & OP_BT_PRIORITY_DETECTED;
+ ret = ath9k_htc_update_cap_target(priv,
+ !!(priv->op_flags & OP_BT_PRIORITY_DETECTED));
+ if (ret) {
+ ath_err(common, "Unable to set BTCOEX parameters\n");
+ return;
+ }
- WMI_CMD_BUF(WMI_AGGR_LIMIT_CMD, &aggr);
-
- ath9k_cmn_btcoex_bt_stomp(common, is_btscan ? ATH_BTCOEX_STOMP_ALL :
+ ath9k_hw_btcoex_bt_stomp(priv->ah, is_btscan ? ATH_BTCOEX_STOMP_ALL :
btcoex->bt_stomp_type);
timer_period = is_btscan ? btcoex->btscan_no_stomp :
@@ -103,9 +105,9 @@
"time slice work for bt and wlan\n");
if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
- ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_NONE);
+ ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
- ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_LOW);
+ ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_LOW);
}
void ath_htc_init_btcoex_work(struct ath9k_htc_priv *priv)
@@ -152,140 +154,41 @@
/* LED */
/*******/
-static void ath9k_led_blink_work(struct work_struct *work)
+#ifdef CONFIG_MAC80211_LEDS
+void ath9k_led_work(struct work_struct *work)
{
- struct ath9k_htc_priv *priv = container_of(work, struct ath9k_htc_priv,
- ath9k_led_blink_work.work);
+ struct ath9k_htc_priv *priv = container_of(work,
+ struct ath9k_htc_priv,
+ led_work);
- if (!(priv->op_flags & OP_LED_ASSOCIATED))
- return;
-
- if ((priv->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
- (priv->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
- ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 0);
- else
- ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
- (priv->op_flags & OP_LED_ON) ? 1 : 0);
-
- ieee80211_queue_delayed_work(priv->hw,
- &priv->ath9k_led_blink_work,
- (priv->op_flags & OP_LED_ON) ?
- msecs_to_jiffies(priv->led_off_duration) :
- msecs_to_jiffies(priv->led_on_duration));
-
- priv->led_on_duration = priv->led_on_cnt ?
- max((ATH_LED_ON_DURATION_IDLE - priv->led_on_cnt), 25) :
- ATH_LED_ON_DURATION_IDLE;
- priv->led_off_duration = priv->led_off_cnt ?
- max((ATH_LED_OFF_DURATION_IDLE - priv->led_off_cnt), 10) :
- ATH_LED_OFF_DURATION_IDLE;
- priv->led_on_cnt = priv->led_off_cnt = 0;
-
- if (priv->op_flags & OP_LED_ON)
- priv->op_flags &= ~OP_LED_ON;
- else
- priv->op_flags |= OP_LED_ON;
-}
-
-static void ath9k_led_brightness_work(struct work_struct *work)
-{
- struct ath_led *led = container_of(work, struct ath_led,
- brightness_work.work);
- struct ath9k_htc_priv *priv = led->priv;
-
- switch (led->brightness) {
- case LED_OFF:
- if (led->led_type == ATH_LED_ASSOC ||
- led->led_type == ATH_LED_RADIO) {
- ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
- (led->led_type == ATH_LED_RADIO));
- priv->op_flags &= ~OP_LED_ASSOCIATED;
- if (led->led_type == ATH_LED_RADIO)
- priv->op_flags &= ~OP_LED_ON;
- } else {
- priv->led_off_cnt++;
- }
- break;
- case LED_FULL:
- if (led->led_type == ATH_LED_ASSOC) {
- priv->op_flags |= OP_LED_ASSOCIATED;
- ieee80211_queue_delayed_work(priv->hw,
- &priv->ath9k_led_blink_work, 0);
- } else if (led->led_type == ATH_LED_RADIO) {
- ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 0);
- priv->op_flags |= OP_LED_ON;
- } else {
- priv->led_on_cnt++;
- }
- break;
- default:
- break;
- }
+ ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
+ (priv->brightness == LED_OFF));
}
static void ath9k_led_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
- struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
- struct ath9k_htc_priv *priv = led->priv;
+ struct ath9k_htc_priv *priv = container_of(led_cdev,
+ struct ath9k_htc_priv,
+ led_cdev);
- led->brightness = brightness;
- if (!(priv->op_flags & OP_LED_DEINIT))
- ieee80211_queue_delayed_work(priv->hw,
- &led->brightness_work, 0);
-}
-
-void ath9k_led_stop_brightness(struct ath9k_htc_priv *priv)
-{
- cancel_delayed_work_sync(&priv->radio_led.brightness_work);
- cancel_delayed_work_sync(&priv->assoc_led.brightness_work);
- cancel_delayed_work_sync(&priv->tx_led.brightness_work);
- cancel_delayed_work_sync(&priv->rx_led.brightness_work);
-}
-
-static int ath9k_register_led(struct ath9k_htc_priv *priv, struct ath_led *led,
- char *trigger)
-{
- int ret;
-
- led->priv = priv;
- led->led_cdev.name = led->name;
- led->led_cdev.default_trigger = trigger;
- led->led_cdev.brightness_set = ath9k_led_brightness;
-
- ret = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_cdev);
- if (ret)
- ath_err(ath9k_hw_common(priv->ah),
- "Failed to register led:%s", led->name);
- else
- led->registered = 1;
-
- INIT_DELAYED_WORK(&led->brightness_work, ath9k_led_brightness_work);
-
- return ret;
-}
-
-static void ath9k_unregister_led(struct ath_led *led)
-{
- if (led->registered) {
- led_classdev_unregister(&led->led_cdev);
- led->registered = 0;
- }
+ /* Not locked, but it's just a tiny green light..*/
+ priv->brightness = brightness;
+ ieee80211_queue_work(priv->hw, &priv->led_work);
}
void ath9k_deinit_leds(struct ath9k_htc_priv *priv)
{
- priv->op_flags |= OP_LED_DEINIT;
- ath9k_unregister_led(&priv->assoc_led);
- priv->op_flags &= ~OP_LED_ASSOCIATED;
- ath9k_unregister_led(&priv->tx_led);
- ath9k_unregister_led(&priv->rx_led);
- ath9k_unregister_led(&priv->radio_led);
+ if (!priv->led_registered)
+ return;
+
+ ath9k_led_brightness(&priv->led_cdev, LED_OFF);
+ led_classdev_unregister(&priv->led_cdev);
+ cancel_work_sync(&priv->led_work);
}
void ath9k_init_leds(struct ath9k_htc_priv *priv)
{
- char *trigger;
int ret;
if (AR_SREV_9287(priv->ah))
@@ -303,48 +206,21 @@
/* LED off, active low */
ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
- INIT_DELAYED_WORK(&priv->ath9k_led_blink_work, ath9k_led_blink_work);
+ snprintf(priv->led_name, sizeof(priv->led_name),
+ "ath9k_htc-%s", wiphy_name(priv->hw->wiphy));
+ priv->led_cdev.name = priv->led_name;
+ priv->led_cdev.brightness_set = ath9k_led_brightness;
- trigger = ieee80211_get_radio_led_name(priv->hw);
- snprintf(priv->radio_led.name, sizeof(priv->radio_led.name),
- "ath9k-%s::radio", wiphy_name(priv->hw->wiphy));
- ret = ath9k_register_led(priv, &priv->radio_led, trigger);
- priv->radio_led.led_type = ATH_LED_RADIO;
- if (ret)
- goto fail;
+ ret = led_classdev_register(wiphy_dev(priv->hw->wiphy), &priv->led_cdev);
+ if (ret < 0)
+ return;
- trigger = ieee80211_get_assoc_led_name(priv->hw);
- snprintf(priv->assoc_led.name, sizeof(priv->assoc_led.name),
- "ath9k-%s::assoc", wiphy_name(priv->hw->wiphy));
- ret = ath9k_register_led(priv, &priv->assoc_led, trigger);
- priv->assoc_led.led_type = ATH_LED_ASSOC;
- if (ret)
- goto fail;
-
- trigger = ieee80211_get_tx_led_name(priv->hw);
- snprintf(priv->tx_led.name, sizeof(priv->tx_led.name),
- "ath9k-%s::tx", wiphy_name(priv->hw->wiphy));
- ret = ath9k_register_led(priv, &priv->tx_led, trigger);
- priv->tx_led.led_type = ATH_LED_TX;
- if (ret)
- goto fail;
-
- trigger = ieee80211_get_rx_led_name(priv->hw);
- snprintf(priv->rx_led.name, sizeof(priv->rx_led.name),
- "ath9k-%s::rx", wiphy_name(priv->hw->wiphy));
- ret = ath9k_register_led(priv, &priv->rx_led, trigger);
- priv->rx_led.led_type = ATH_LED_RX;
- if (ret)
- goto fail;
-
- priv->op_flags &= ~OP_LED_DEINIT;
+ INIT_WORK(&priv->led_work, ath9k_led_work);
+ priv->led_registered = true;
return;
-
-fail:
- cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
- ath9k_deinit_leds(priv);
}
+#endif
/*******************/
/* Rfkill */
@@ -398,9 +274,9 @@
/* Start TX */
htc_start(priv->htc);
- spin_lock_bh(&priv->tx_lock);
- priv->tx_queues_stop = false;
- spin_unlock_bh(&priv->tx_lock);
+ spin_lock_bh(&priv->tx.tx_lock);
+ priv->tx.flags &= ~ATH9K_HTC_OP_TX_QUEUES_STOP;
+ spin_unlock_bh(&priv->tx.tx_lock);
ieee80211_wake_queues(hw);
WMI_CMD(WMI_ENABLE_INTR_CMDID);
@@ -429,13 +305,15 @@
/* Stop TX */
ieee80211_stop_queues(hw);
- htc_stop(priv->htc);
+ ath9k_htc_tx_drain(priv);
WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
- skb_queue_purge(&priv->tx_queue);
/* Stop RX */
WMI_CMD(WMI_STOP_RECV_CMDID);
+ /* Clear the WMI event queue */
+ ath9k_wmi_event_drain(priv);
+
/*
* The MIB counters have to be disabled here,
* since the target doesn't do it.
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index fc67c93..bfdc8a8 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -117,6 +117,21 @@
RATE(540, 0x0c, 0),
};
+#ifdef CONFIG_MAC80211_LEDS
+static const struct ieee80211_tpt_blink ath9k_htc_tpt_blink[] = {
+ { .throughput = 0 * 1024, .blink_time = 334 },
+ { .throughput = 1 * 1024, .blink_time = 260 },
+ { .throughput = 5 * 1024, .blink_time = 220 },
+ { .throughput = 10 * 1024, .blink_time = 190 },
+ { .throughput = 20 * 1024, .blink_time = 170 },
+ { .throughput = 50 * 1024, .blink_time = 150 },
+ { .throughput = 70 * 1024, .blink_time = 130 },
+ { .throughput = 100 * 1024, .blink_time = 110 },
+ { .throughput = 200 * 1024, .blink_time = 80 },
+ { .throughput = 300 * 1024, .blink_time = 50 },
+};
+#endif
+
static int ath9k_htc_wait_for_target(struct ath9k_htc_priv *priv)
{
int time_left;
@@ -140,7 +155,6 @@
static void ath9k_deinit_priv(struct ath9k_htc_priv *priv)
{
- ath9k_htc_exit_debug(priv->ah);
ath9k_hw_deinit(priv->ah);
kfree(priv->ah);
priv->ah = NULL;
@@ -244,7 +258,7 @@
*/
if (IS_AR7010_DEVICE(drv_info))
- priv->htc->credits = 45;
+ priv->htc->credits = 48;
else
priv->htc->credits = 33;
@@ -430,13 +444,16 @@
mutex_unlock(&priv->wmi->multi_write_mutex);
}
-static const struct ath_ops ath9k_common_ops = {
- .read = ath9k_regread,
- .multi_read = ath9k_multi_regread,
- .write = ath9k_regwrite,
- .enable_write_buffer = ath9k_enable_regwrite_buffer,
- .write_flush = ath9k_regwrite_flush,
-};
+static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
+{
+ u32 val;
+
+ val = ath9k_regread(hw_priv, reg_offset);
+ val &= ~clr;
+ val |= set;
+ ath9k_regwrite(hw_priv, val, reg_offset);
+ return val;
+}
static void ath_usb_read_cachesize(struct ath_common *common, int *csz)
{
@@ -561,13 +578,7 @@
int i = 0;
/* Get the hardware key cache size. */
- common->keymax = priv->ah->caps.keycache_size;
- if (common->keymax > ATH_KEYMAX) {
- ath_dbg(common, ATH_DBG_ANY,
- "Warning, using only %u entries in %u key cache\n",
- ATH_KEYMAX, common->keymax);
- common->keymax = ATH_KEYMAX;
- }
+ common->keymax = AR_KEYTABLE_SIZE;
if (priv->ah->misc_mode & AR_PCU_MIC_NEW_LOC_ENA)
common->crypt_caps |= ATH_CRYPT_CAP_MIC_COMBINED;
@@ -646,7 +657,7 @@
{
struct ath_hw *ah = NULL;
struct ath_common *common;
- int ret = 0, csz = 0;
+ int i, ret = 0, csz = 0;
priv->op_flags |= OP_INVALID;
@@ -658,30 +669,35 @@
ah->hw_version.subsysid = 0; /* FIXME */
ah->hw_version.usbdev = drv_info;
ah->ah_flags |= AH_USE_EEPROM;
+ ah->reg_ops.read = ath9k_regread;
+ ah->reg_ops.multi_read = ath9k_multi_regread;
+ ah->reg_ops.write = ath9k_regwrite;
+ ah->reg_ops.enable_write_buffer = ath9k_enable_regwrite_buffer;
+ ah->reg_ops.write_flush = ath9k_regwrite_flush;
+ ah->reg_ops.rmw = ath9k_reg_rmw;
priv->ah = ah;
common = ath9k_hw_common(ah);
- common->ops = &ath9k_common_ops;
+ common->ops = &ah->reg_ops;
common->bus_ops = &ath9k_usb_bus_ops;
common->ah = ah;
common->hw = priv->hw;
common->priv = priv;
common->debug_mask = ath9k_debug;
- spin_lock_init(&priv->wmi->wmi_lock);
spin_lock_init(&priv->beacon_lock);
- spin_lock_init(&priv->tx_lock);
+ spin_lock_init(&priv->tx.tx_lock);
mutex_init(&priv->mutex);
mutex_init(&priv->htc_pm_lock);
- tasklet_init(&priv->swba_tasklet, ath9k_swba_tasklet,
- (unsigned long)priv);
tasklet_init(&priv->rx_tasklet, ath9k_rx_tasklet,
(unsigned long)priv);
- tasklet_init(&priv->tx_tasklet, ath9k_tx_tasklet,
+ tasklet_init(&priv->tx_failed_tasklet, ath9k_tx_failed_tasklet,
(unsigned long)priv);
INIT_DELAYED_WORK(&priv->ani_work, ath9k_htc_ani_work);
INIT_WORK(&priv->ps_work, ath9k_ps_work);
INIT_WORK(&priv->fatal_work, ath9k_fatal_work);
+ setup_timer(&priv->tx.cleanup_timer, ath9k_htc_tx_cleanup_timer,
+ (unsigned long)priv);
/*
* Cache line size is used to size and align various
@@ -698,16 +714,13 @@
goto err_hw;
}
- ret = ath9k_htc_init_debug(ah);
- if (ret) {
- ath_err(common, "Unable to create debugfs files\n");
- goto err_debug;
- }
-
ret = ath9k_init_queues(priv);
if (ret)
goto err_queues;
+ for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++)
+ priv->cur_beacon_conf.bslot[i] = NULL;
+
ath9k_init_crypto(priv);
ath9k_init_channels_rates(priv);
ath9k_init_misc(priv);
@@ -720,8 +733,6 @@
return 0;
err_queues:
- ath9k_htc_exit_debug(ah);
-err_debug:
ath9k_hw_deinit(ah);
err_hw:
@@ -742,17 +753,27 @@
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK;
+ IEEE80211_HW_PS_NULLFUNC_STACK |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC);
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT);
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->queues = 4;
hw->channel_change_time = 5000;
hw->max_listen_interval = 10;
+
+ if (AR_SREV_9271(priv->ah))
+ hw->max_tx_aggregation_subframes = MAX_TX_AMPDU_SUBFRAMES_9271;
+ else
+ hw->max_tx_aggregation_subframes = MAX_TX_AMPDU_SUBFRAMES_7010;
+
hw->vif_data_size = sizeof(struct ath9k_htc_vif);
hw->sta_data_size = sizeof(struct ath9k_htc_sta);
@@ -779,6 +800,43 @@
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}
+static int ath9k_init_firmware_version(struct ath9k_htc_priv *priv)
+{
+ struct ieee80211_hw *hw = priv->hw;
+ struct wmi_fw_version cmd_rsp;
+ int ret;
+
+ memset(&cmd_rsp, 0, sizeof(cmd_rsp));
+
+ WMI_CMD(WMI_GET_FW_VERSION);
+ if (ret)
+ return -EINVAL;
+
+ priv->fw_version_major = be16_to_cpu(cmd_rsp.major);
+ priv->fw_version_minor = be16_to_cpu(cmd_rsp.minor);
+
+ snprintf(hw->wiphy->fw_version, ETHTOOL_BUSINFO_LEN, "%d.%d",
+ priv->fw_version_major,
+ priv->fw_version_minor);
+
+ dev_info(priv->dev, "ath9k_htc: FW Version: %d.%d\n",
+ priv->fw_version_major,
+ priv->fw_version_minor);
+
+ /*
+ * Check if the available FW matches the driver's
+ * required version.
+ */
+ if (priv->fw_version_major != MAJOR_VERSION_REQ ||
+ priv->fw_version_minor != MINOR_VERSION_REQ) {
+ dev_err(priv->dev, "ath9k_htc: Please upgrade to FW version %d.%d\n",
+ MAJOR_VERSION_REQ, MINOR_VERSION_REQ);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int ath9k_init_device(struct ath9k_htc_priv *priv,
u16 devid, char *product, u32 drv_info)
{
@@ -798,6 +856,10 @@
common = ath9k_hw_common(ah);
ath9k_set_hw_capab(priv, hw);
+ error = ath9k_init_firmware_version(priv);
+ if (error != 0)
+ goto err_fw;
+
/* Initialize regulatory */
error = ath_regd_init(&common->regulatory, priv->hw->wiphy,
ath9k_reg_notifier);
@@ -816,6 +878,13 @@
if (error != 0)
goto err_rx;
+#ifdef CONFIG_MAC80211_LEDS
+ /* must be initialized before ieee80211_register_hw */
+ priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw,
+ IEEE80211_TPT_LEDTRIG_FL_RADIO, ath9k_htc_tpt_blink,
+ ARRAY_SIZE(ath9k_htc_tpt_blink));
+#endif
+
/* Register with mac80211 */
error = ieee80211_register_hw(hw);
if (error)
@@ -828,6 +897,12 @@
goto err_world;
}
+ error = ath9k_htc_init_debug(priv->ah);
+ if (error) {
+ ath_err(common, "Unable to create debugfs files\n");
+ goto err_world;
+ }
+
ath_dbg(common, ATH_DBG_CONFIG,
"WMI:%d, BCN:%d, CAB:%d, UAPSD:%d, MGMT:%d, "
"BE:%d, BK:%d, VI:%d, VO:%d\n",
@@ -858,6 +933,8 @@
err_tx:
/* Nothing */
err_regd:
+ /* Nothing */
+err_fw:
ath9k_deinit_priv(priv);
err_init:
return error;
@@ -946,38 +1023,20 @@
static int __init ath9k_htc_init(void)
{
- int error;
-
- error = ath9k_htc_debug_create_root();
- if (error < 0) {
- printk(KERN_ERR
- "ath9k_htc: Unable to create debugfs root: %d\n",
- error);
- goto err_dbg;
- }
-
- error = ath9k_hif_usb_init();
- if (error < 0) {
+ if (ath9k_hif_usb_init() < 0) {
printk(KERN_ERR
"ath9k_htc: No USB devices found,"
" driver not installed.\n");
- error = -ENODEV;
- goto err_usb;
+ return -ENODEV;
}
return 0;
-
-err_usb:
- ath9k_htc_debug_remove_root();
-err_dbg:
- return error;
}
module_init(ath9k_htc_init);
static void __exit ath9k_htc_exit(void)
{
ath9k_hif_usb_exit();
- ath9k_htc_debug_remove_root();
printk(KERN_INFO "ath9k_htc: Driver unloaded\n");
}
module_exit(ath9k_htc_exit);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index db8c0c0..5aa104fe 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -16,10 +16,6 @@
#include "htc.h"
-#ifdef CONFIG_ATH9K_HTC_DEBUGFS
-static struct dentry *ath9k_debugfs_root;
-#endif
-
/*************/
/* Utilities */
/*************/
@@ -197,11 +193,16 @@
ath9k_htc_stop_ani(priv);
ieee80211_stop_queues(priv->hw);
- htc_stop(priv->htc);
+
+ del_timer_sync(&priv->tx.cleanup_timer);
+ ath9k_htc_tx_drain(priv);
+
WMI_CMD(WMI_DISABLE_INTR_CMDID);
WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
WMI_CMD(WMI_STOP_RECV_CMDID);
+ ath9k_wmi_event_drain(priv);
+
caldata = &priv->caldata;
ret = ath9k_hw_reset(ah, ah->curchan, caldata, false);
if (ret) {
@@ -225,6 +226,9 @@
ath9k_htc_vif_reconfig(priv);
ieee80211_wake_queues(priv->hw);
+ mod_timer(&priv->tx.cleanup_timer,
+ jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));
+
ath9k_htc_ps_restore(priv);
mutex_unlock(&priv->mutex);
}
@@ -250,11 +254,16 @@
fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
ath9k_htc_ps_wakeup(priv);
- htc_stop(priv->htc);
+
+ del_timer_sync(&priv->tx.cleanup_timer);
+ ath9k_htc_tx_drain(priv);
+
WMI_CMD(WMI_DISABLE_INTR_CMDID);
WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
WMI_CMD(WMI_STOP_RECV_CMDID);
+ ath9k_wmi_event_drain(priv);
+
ath_dbg(common, ATH_DBG_CONFIG,
"(%u MHz) -> (%u MHz), HT: %d, HT40: %d fastcc: %d\n",
priv->ah->curchan->channel,
@@ -263,6 +272,7 @@
if (!fastcc)
caldata = &priv->caldata;
+
ret = ath9k_hw_reset(ah, hchan, caldata, fastcc);
if (ret) {
ath_err(common,
@@ -296,6 +306,9 @@
!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
ath9k_htc_vif_reconfig(priv);
+ mod_timer(&priv->tx.cleanup_timer,
+ jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));
+
err:
ath9k_htc_ps_restore(priv);
return ret;
@@ -319,6 +332,11 @@
memcpy(&hvif.myaddr, common->macaddr, ETH_ALEN);
hvif.index = priv->mon_vif_idx;
WMI_CMD_BUF(WMI_VAP_REMOVE_CMDID, &hvif);
+ if (ret) {
+ ath_err(common, "Unable to remove monitor interface at idx: %d\n",
+ priv->mon_vif_idx);
+ }
+
priv->nvifs--;
priv->vif_slot &= ~(1 << priv->mon_vif_idx);
}
@@ -349,7 +367,7 @@
memset(&hvif, 0, sizeof(struct ath9k_htc_target_vif));
memcpy(&hvif.myaddr, common->macaddr, ETH_ALEN);
- hvif.opmode = cpu_to_be32(HTC_M_MONITOR);
+ hvif.opmode = HTC_M_MONITOR;
hvif.index = ffz(priv->vif_slot);
WMI_CMD_BUF(WMI_VAP_CREATE_CMDID, &hvif);
@@ -382,7 +400,7 @@
tsta.is_vif_sta = 1;
tsta.sta_index = sta_idx;
tsta.vif_index = hvif.index;
- tsta.maxampdu = 0xffff;
+ tsta.maxampdu = cpu_to_be16(0xffff);
WMI_CMD_BUF(WMI_NODE_CREATE_CMDID, &tsta);
if (ret) {
@@ -449,6 +467,7 @@
struct ath9k_htc_sta *ista;
int ret, sta_idx;
u8 cmd_rsp;
+ u16 maxampdu;
if (priv->nstations >= ATH9K_HTC_MAX_STA)
return -ENOBUFS;
@@ -463,9 +482,7 @@
ista = (struct ath9k_htc_sta *) sta->drv_priv;
memcpy(&tsta.macaddr, sta->addr, ETH_ALEN);
memcpy(&tsta.bssid, common->curbssid, ETH_ALEN);
- tsta.associd = common->curaid;
tsta.is_vif_sta = 0;
- tsta.valid = true;
ista->index = sta_idx;
} else {
memcpy(&tsta.macaddr, vif->addr, ETH_ALEN);
@@ -474,7 +491,15 @@
tsta.sta_index = sta_idx;
tsta.vif_index = avp->index;
- tsta.maxampdu = 0xffff;
+
+ if (!sta) {
+ tsta.maxampdu = cpu_to_be16(0xffff);
+ } else {
+ maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+ sta->ht_cap.ampdu_factor);
+ tsta.maxampdu = cpu_to_be16(maxampdu);
+ }
+
if (sta && sta->ht_cap.ht_supported)
tsta.flags = cpu_to_be16(ATH_HTC_STA_HT);
@@ -547,7 +572,8 @@
return 0;
}
-int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv)
+int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv,
+ u8 enable_coex)
{
struct ath9k_htc_cap_target tcap;
int ret;
@@ -555,13 +581,9 @@
memset(&tcap, 0, sizeof(struct ath9k_htc_cap_target));
- /* FIXME: Values are hardcoded */
- tcap.flags = 0x240c40;
- tcap.flags_ext = 0x80601000;
- tcap.ampdu_limit = 0xffff0000;
- tcap.ampdu_subframes = 20;
- tcap.tx_chainmask_legacy = priv->ah->caps.tx_chainmask;
- tcap.protmode = 1;
+ tcap.ampdu_limit = cpu_to_be32(0xffff);
+ tcap.ampdu_subframes = priv->hw->max_tx_aggregation_subframes;
+ tcap.enable_coex = enable_coex;
tcap.tx_chainmask = priv->ah->caps.tx_chainmask;
WMI_CMD_BUF(WMI_TARGET_IC_UPDATE_CMDID, &tcap);
@@ -709,218 +731,13 @@
(aggr.aggr_enable) ? "Starting" : "Stopping",
sta->addr, tid);
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_bh(&priv->tx.tx_lock);
ista->tid_state[tid] = (aggr.aggr_enable && !ret) ? AGGR_START : AGGR_STOP;
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_bh(&priv->tx.tx_lock);
return ret;
}
-/*********/
-/* DEBUG */
-/*********/
-
-#ifdef CONFIG_ATH9K_HTC_DEBUGFS
-
-static int ath9k_debugfs_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-static ssize_t read_file_tgt_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath9k_htc_priv *priv = file->private_data;
- struct ath9k_htc_target_stats cmd_rsp;
- char buf[512];
- unsigned int len = 0;
- int ret = 0;
-
- memset(&cmd_rsp, 0, sizeof(cmd_rsp));
-
- WMI_CMD(WMI_TGT_STATS_CMDID);
- if (ret)
- return -EINVAL;
-
-
- len += snprintf(buf + len, sizeof(buf) - len,
- "%19s : %10u\n", "TX Short Retries",
- be32_to_cpu(cmd_rsp.tx_shortretry));
- len += snprintf(buf + len, sizeof(buf) - len,
- "%19s : %10u\n", "TX Long Retries",
- be32_to_cpu(cmd_rsp.tx_longretry));
- len += snprintf(buf + len, sizeof(buf) - len,
- "%19s : %10u\n", "TX Xretries",
- be32_to_cpu(cmd_rsp.tx_xretries));
- len += snprintf(buf + len, sizeof(buf) - len,
- "%19s : %10u\n", "TX Unaggr. Xretries",
- be32_to_cpu(cmd_rsp.ht_txunaggr_xretry));
- len += snprintf(buf + len, sizeof(buf) - len,
- "%19s : %10u\n", "TX Xretries (HT)",
- be32_to_cpu(cmd_rsp.ht_tx_xretries));
- len += snprintf(buf + len, sizeof(buf) - len,
- "%19s : %10u\n", "TX Rate", priv->debug.txrate);
-
- if (len > sizeof(buf))
- len = sizeof(buf);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static const struct file_operations fops_tgt_stats = {
- .read = read_file_tgt_stats,
- .open = ath9k_debugfs_open,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
-};
-
-static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath9k_htc_priv *priv = file->private_data;
- char buf[512];
- unsigned int len = 0;
-
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "Buffers queued",
- priv->debug.tx_stats.buf_queued);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "Buffers completed",
- priv->debug.tx_stats.buf_completed);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "SKBs queued",
- priv->debug.tx_stats.skb_queued);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "SKBs completed",
- priv->debug.tx_stats.skb_completed);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "SKBs dropped",
- priv->debug.tx_stats.skb_dropped);
-
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "BE queued",
- priv->debug.tx_stats.queue_stats[WME_AC_BE]);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "BK queued",
- priv->debug.tx_stats.queue_stats[WME_AC_BK]);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "VI queued",
- priv->debug.tx_stats.queue_stats[WME_AC_VI]);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "VO queued",
- priv->debug.tx_stats.queue_stats[WME_AC_VO]);
-
- if (len > sizeof(buf))
- len = sizeof(buf);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static const struct file_operations fops_xmit = {
- .read = read_file_xmit,
- .open = ath9k_debugfs_open,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
-};
-
-static ssize_t read_file_recv(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ath9k_htc_priv *priv = file->private_data;
- char buf[512];
- unsigned int len = 0;
-
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "SKBs allocated",
- priv->debug.rx_stats.skb_allocated);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "SKBs completed",
- priv->debug.rx_stats.skb_completed);
- len += snprintf(buf + len, sizeof(buf) - len,
- "%20s : %10u\n", "SKBs Dropped",
- priv->debug.rx_stats.skb_dropped);
-
- if (len > sizeof(buf))
- len = sizeof(buf);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static const struct file_operations fops_recv = {
- .read = read_file_recv,
- .open = ath9k_debugfs_open,
- .owner = THIS_MODULE,
- .llseek = default_llseek,
-};
-
-int ath9k_htc_init_debug(struct ath_hw *ah)
-{
- struct ath_common *common = ath9k_hw_common(ah);
- struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-
- if (!ath9k_debugfs_root)
- return -ENOENT;
-
- priv->debug.debugfs_phy = debugfs_create_dir(wiphy_name(priv->hw->wiphy),
- ath9k_debugfs_root);
- if (!priv->debug.debugfs_phy)
- goto err;
-
- priv->debug.debugfs_tgt_stats = debugfs_create_file("tgt_stats", S_IRUSR,
- priv->debug.debugfs_phy,
- priv, &fops_tgt_stats);
- if (!priv->debug.debugfs_tgt_stats)
- goto err;
-
-
- priv->debug.debugfs_xmit = debugfs_create_file("xmit", S_IRUSR,
- priv->debug.debugfs_phy,
- priv, &fops_xmit);
- if (!priv->debug.debugfs_xmit)
- goto err;
-
- priv->debug.debugfs_recv = debugfs_create_file("recv", S_IRUSR,
- priv->debug.debugfs_phy,
- priv, &fops_recv);
- if (!priv->debug.debugfs_recv)
- goto err;
-
- return 0;
-
-err:
- ath9k_htc_exit_debug(ah);
- return -ENOMEM;
-}
-
-void ath9k_htc_exit_debug(struct ath_hw *ah)
-{
- struct ath_common *common = ath9k_hw_common(ah);
- struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-
- debugfs_remove(priv->debug.debugfs_recv);
- debugfs_remove(priv->debug.debugfs_xmit);
- debugfs_remove(priv->debug.debugfs_tgt_stats);
- debugfs_remove(priv->debug.debugfs_phy);
-}
-
-int ath9k_htc_debug_create_root(void)
-{
- ath9k_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
- if (!ath9k_debugfs_root)
- return -ENOENT;
-
- return 0;
-}
-
-void ath9k_htc_debug_remove_root(void)
-{
- debugfs_remove(ath9k_debugfs_root);
- ath9k_debugfs_root = NULL;
-}
-
-#endif /* CONFIG_ATH9K_HTC_DEBUGFS */
-
/*******/
/* ANI */
/*******/
@@ -1040,7 +857,8 @@
{
struct ieee80211_hdr *hdr;
struct ath9k_htc_priv *priv = hw->priv;
- int padpos, padsize, ret;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ int padpos, padsize, ret, slot;
hdr = (struct ieee80211_hdr *) skb->data;
@@ -1048,30 +866,32 @@
padpos = ath9k_cmn_padpos(hdr->frame_control);
padsize = padpos & 3;
if (padsize && skb->len > padpos) {
- if (skb_headroom(skb) < padsize)
+ if (skb_headroom(skb) < padsize) {
+ ath_dbg(common, ATH_DBG_XMIT, "No room for padding\n");
goto fail_tx;
+ }
skb_push(skb, padsize);
memmove(skb->data, skb->data + padsize, padpos);
}
- ret = ath9k_htc_tx_start(priv, skb);
- if (ret != 0) {
- if (ret == -ENOMEM) {
- ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
- "Stopping TX queues\n");
- ieee80211_stop_queues(hw);
- spin_lock_bh(&priv->tx_lock);
- priv->tx_queues_stop = true;
- spin_unlock_bh(&priv->tx_lock);
- } else {
- ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
- "Tx failed\n");
- }
+ slot = ath9k_htc_tx_get_slot(priv);
+ if (slot < 0) {
+ ath_dbg(common, ATH_DBG_XMIT, "No free TX slot\n");
goto fail_tx;
}
+ ret = ath9k_htc_tx_start(priv, skb, slot, false);
+ if (ret != 0) {
+ ath_dbg(common, ATH_DBG_XMIT, "Tx failed\n");
+ goto clear_slot;
+ }
+
+ ath9k_htc_check_stop_queues(priv);
+
return;
+clear_slot:
+ ath9k_htc_tx_clear_slot(priv, slot);
fail_tx:
dev_kfree_skb_any(skb);
}
@@ -1122,7 +942,7 @@
ath9k_host_rx_init(priv);
- ret = ath9k_htc_update_cap_target(priv);
+ ret = ath9k_htc_update_cap_target(priv, 0);
if (ret)
ath_dbg(common, ATH_DBG_CONFIG,
"Failed to update capability in target\n");
@@ -1130,12 +950,15 @@
priv->op_flags &= ~OP_INVALID;
htc_start(priv->htc);
- spin_lock_bh(&priv->tx_lock);
- priv->tx_queues_stop = false;
- spin_unlock_bh(&priv->tx_lock);
+ spin_lock_bh(&priv->tx.tx_lock);
+ priv->tx.flags &= ~ATH9K_HTC_OP_TX_QUEUES_STOP;
+ spin_unlock_bh(&priv->tx.tx_lock);
ieee80211_wake_queues(hw);
+ mod_timer(&priv->tx.cleanup_timer,
+ jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));
+
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) {
ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
AR_STOMP_LOW_WLAN_WGHT);
@@ -1152,7 +975,7 @@
struct ath9k_htc_priv *priv = hw->priv;
struct ath_hw *ah = priv->ah;
struct ath_common *common = ath9k_hw_common(ah);
- int ret = 0;
+ int ret __attribute__ ((unused));
u8 cmd_rsp;
mutex_lock(&priv->mutex);
@@ -1164,25 +987,27 @@
}
ath9k_htc_ps_wakeup(priv);
- htc_stop(priv->htc);
+
WMI_CMD(WMI_DISABLE_INTR_CMDID);
WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
WMI_CMD(WMI_STOP_RECV_CMDID);
- tasklet_kill(&priv->swba_tasklet);
tasklet_kill(&priv->rx_tasklet);
- tasklet_kill(&priv->tx_tasklet);
- skb_queue_purge(&priv->tx_queue);
+ del_timer_sync(&priv->tx.cleanup_timer);
+ ath9k_htc_tx_drain(priv);
+ ath9k_wmi_event_drain(priv);
mutex_unlock(&priv->mutex);
/* Cancel all the running timers/work .. */
cancel_work_sync(&priv->fatal_work);
cancel_work_sync(&priv->ps_work);
- cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
+
+#ifdef CONFIG_MAC80211_LEDS
+ cancel_work_sync(&priv->led_work);
+#endif
ath9k_htc_stop_ani(priv);
- ath9k_led_stop_brightness(priv);
mutex_lock(&priv->mutex);
@@ -1245,13 +1070,13 @@
switch (vif->type) {
case NL80211_IFTYPE_STATION:
- hvif.opmode = cpu_to_be32(HTC_M_STA);
+ hvif.opmode = HTC_M_STA;
break;
case NL80211_IFTYPE_ADHOC:
- hvif.opmode = cpu_to_be32(HTC_M_IBSS);
+ hvif.opmode = HTC_M_IBSS;
break;
case NL80211_IFTYPE_AP:
- hvif.opmode = cpu_to_be32(HTC_M_HOSTAP);
+ hvif.opmode = HTC_M_HOSTAP;
break;
default:
ath_err(common,
@@ -1281,14 +1106,20 @@
priv->vif_slot |= (1 << avp->index);
priv->nvifs++;
- priv->vif = vif;
INC_VIF(priv, vif->type);
+
+ if ((vif->type == NL80211_IFTYPE_AP) ||
+ (vif->type == NL80211_IFTYPE_ADHOC))
+ ath9k_htc_assign_bslot(priv, vif);
+
ath9k_htc_set_opmode(priv);
if ((priv->ah->opmode == NL80211_IFTYPE_AP) &&
- !(priv->op_flags & OP_ANI_RUNNING))
+ !(priv->op_flags & OP_ANI_RUNNING)) {
+ ath9k_hw_set_tsfadjust(priv->ah, 1);
ath9k_htc_start_ani(priv);
+ }
ath_dbg(common, ATH_DBG_CONFIG,
"Attach a VIF of type: %d at idx: %d\n", vif->type, avp->index);
@@ -1317,13 +1148,21 @@
memcpy(&hvif.myaddr, vif->addr, ETH_ALEN);
hvif.index = avp->index;
WMI_CMD_BUF(WMI_VAP_REMOVE_CMDID, &hvif);
+ if (ret) {
+ ath_err(common, "Unable to remove interface at idx: %d\n",
+ avp->index);
+ }
priv->nvifs--;
priv->vif_slot &= ~(1 << avp->index);
ath9k_htc_remove_station(priv, vif, NULL);
- priv->vif = NULL;
DEC_VIF(priv, vif->type);
+
+ if ((vif->type == NL80211_IFTYPE_AP) ||
+ (vif->type == NL80211_IFTYPE_ADHOC))
+ ath9k_htc_remove_bslot(priv, vif);
+
ath9k_htc_set_opmode(priv);
/*
@@ -1493,10 +1332,13 @@
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
+ struct ath9k_htc_sta *ista;
int ret;
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
+ ista = (struct ath9k_htc_sta *) sta->drv_priv;
+ htc_sta_drain(priv->htc, ista->index);
ret = ath9k_htc_remove_station(priv, vif, sta);
ath9k_htc_ps_restore(priv);
mutex_unlock(&priv->mutex);
@@ -1644,6 +1486,7 @@
if ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon) {
ath_dbg(common, ATH_DBG_CONFIG,
"Beacon enabled for BSS: %pM\n", bss_conf->bssid);
+ ath9k_htc_set_tsfadjust(priv, vif);
priv->op_flags |= OP_ENABLE_BEACON;
ath9k_htc_beacon_config(priv, vif);
}
@@ -1741,6 +1584,7 @@
int ret = 0;
mutex_lock(&priv->mutex);
+ ath9k_htc_ps_wakeup(priv);
switch (action) {
case IEEE80211_AMPDU_RX_START:
@@ -1758,14 +1602,15 @@
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
ista = (struct ath9k_htc_sta *) sta->drv_priv;
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_bh(&priv->tx.tx_lock);
ista->tid_state[tid] = AGGR_OPERATIONAL;
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_bh(&priv->tx.tx_lock);
break;
default:
ath_err(ath9k_hw_common(priv->ah), "Unknown AMPDU action\n");
}
+ ath9k_htc_ps_restore(priv);
mutex_unlock(&priv->mutex);
return ret;
@@ -1816,6 +1661,55 @@
mutex_unlock(&priv->mutex);
}
+/*
+ * Currently, this is used only for selecting the minimum rate
+ * for management frames, rate selection for data frames remain
+ * unaffected.
+ */
+static int ath9k_htc_set_bitrate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct ath9k_htc_priv *priv = hw->priv;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_target_rate_mask tmask;
+ struct ath9k_htc_vif *avp = (void *)vif->drv_priv;
+ int ret = 0;
+ u8 cmd_rsp;
+
+ memset(&tmask, 0, sizeof(struct ath9k_htc_target_rate_mask));
+
+ tmask.vif_index = avp->index;
+ tmask.band = IEEE80211_BAND_2GHZ;
+ tmask.mask = cpu_to_be32(mask->control[IEEE80211_BAND_2GHZ].legacy);
+
+ WMI_CMD_BUF(WMI_BITRATE_MASK_CMDID, &tmask);
+ if (ret) {
+ ath_err(common,
+ "Unable to set 2G rate mask for "
+ "interface at idx: %d\n", avp->index);
+ goto out;
+ }
+
+ tmask.band = IEEE80211_BAND_5GHZ;
+ tmask.mask = cpu_to_be32(mask->control[IEEE80211_BAND_5GHZ].legacy);
+
+ WMI_CMD_BUF(WMI_BITRATE_MASK_CMDID, &tmask);
+ if (ret) {
+ ath_err(common,
+ "Unable to set 5G rate mask for "
+ "interface at idx: %d\n", avp->index);
+ goto out;
+ }
+
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Set bitrate masks: 0x%x, 0x%x\n",
+ mask->control[IEEE80211_BAND_2GHZ].legacy,
+ mask->control[IEEE80211_BAND_5GHZ].legacy);
+out:
+ return ret;
+}
+
struct ieee80211_ops ath9k_htc_ops = {
.tx = ath9k_htc_tx,
.start = ath9k_htc_start,
@@ -1838,4 +1732,5 @@
.set_rts_threshold = ath9k_htc_set_rts_threshold,
.rfkill_poll = ath9k_htc_rfkill_poll_state,
.set_coverage_class = ath9k_htc_set_coverage_class,
+ .set_bitrate_mask = ath9k_htc_set_bitrate_mask,
};
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 4a4f27b..a898dac 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -53,6 +53,138 @@
}
}
+void ath9k_htc_check_stop_queues(struct ath9k_htc_priv *priv)
+{
+ spin_lock_bh(&priv->tx.tx_lock);
+ priv->tx.queued_cnt++;
+ if ((priv->tx.queued_cnt >= ATH9K_HTC_TX_THRESHOLD) &&
+ !(priv->tx.flags & ATH9K_HTC_OP_TX_QUEUES_STOP)) {
+ priv->tx.flags |= ATH9K_HTC_OP_TX_QUEUES_STOP;
+ ieee80211_stop_queues(priv->hw);
+ }
+ spin_unlock_bh(&priv->tx.tx_lock);
+}
+
+void ath9k_htc_check_wake_queues(struct ath9k_htc_priv *priv)
+{
+ spin_lock_bh(&priv->tx.tx_lock);
+ if ((priv->tx.queued_cnt < ATH9K_HTC_TX_THRESHOLD) &&
+ (priv->tx.flags & ATH9K_HTC_OP_TX_QUEUES_STOP)) {
+ priv->tx.flags &= ~ATH9K_HTC_OP_TX_QUEUES_STOP;
+ ieee80211_wake_queues(priv->hw);
+ }
+ spin_unlock_bh(&priv->tx.tx_lock);
+}
+
+int ath9k_htc_tx_get_slot(struct ath9k_htc_priv *priv)
+{
+ int slot;
+
+ spin_lock_bh(&priv->tx.tx_lock);
+ slot = find_first_zero_bit(priv->tx.tx_slot, MAX_TX_BUF_NUM);
+ if (slot >= MAX_TX_BUF_NUM) {
+ spin_unlock_bh(&priv->tx.tx_lock);
+ return -ENOBUFS;
+ }
+ __set_bit(slot, priv->tx.tx_slot);
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ return slot;
+}
+
+void ath9k_htc_tx_clear_slot(struct ath9k_htc_priv *priv, int slot)
+{
+ spin_lock_bh(&priv->tx.tx_lock);
+ __clear_bit(slot, priv->tx.tx_slot);
+ spin_unlock_bh(&priv->tx.tx_lock);
+}
+
+static inline enum htc_endpoint_id get_htc_epid(struct ath9k_htc_priv *priv,
+ u16 qnum)
+{
+ enum htc_endpoint_id epid;
+
+ switch (qnum) {
+ case 0:
+ TX_QSTAT_INC(WME_AC_VO);
+ epid = priv->data_vo_ep;
+ break;
+ case 1:
+ TX_QSTAT_INC(WME_AC_VI);
+ epid = priv->data_vi_ep;
+ break;
+ case 2:
+ TX_QSTAT_INC(WME_AC_BE);
+ epid = priv->data_be_ep;
+ break;
+ case 3:
+ default:
+ TX_QSTAT_INC(WME_AC_BK);
+ epid = priv->data_bk_ep;
+ break;
+ }
+
+ return epid;
+}
+
+static inline struct sk_buff_head*
+get_htc_epid_queue(struct ath9k_htc_priv *priv, u8 epid)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct sk_buff_head *epid_queue = NULL;
+
+ if (epid == priv->mgmt_ep)
+ epid_queue = &priv->tx.mgmt_ep_queue;
+ else if (epid == priv->cab_ep)
+ epid_queue = &priv->tx.cab_ep_queue;
+ else if (epid == priv->data_be_ep)
+ epid_queue = &priv->tx.data_be_queue;
+ else if (epid == priv->data_bk_ep)
+ epid_queue = &priv->tx.data_bk_queue;
+ else if (epid == priv->data_vi_ep)
+ epid_queue = &priv->tx.data_vi_queue;
+ else if (epid == priv->data_vo_ep)
+ epid_queue = &priv->tx.data_vo_queue;
+ else
+ ath_err(common, "Invalid EPID: %d\n", epid);
+
+ return epid_queue;
+}
+
+/*
+ * Removes the driver header and returns the TX slot number
+ */
+static inline int strip_drv_header(struct ath9k_htc_priv *priv,
+ struct sk_buff *skb)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_tx_ctl *tx_ctl;
+ int slot;
+
+ tx_ctl = HTC_SKB_CB(skb);
+
+ if (tx_ctl->epid == priv->mgmt_ep) {
+ struct tx_mgmt_hdr *tx_mhdr =
+ (struct tx_mgmt_hdr *)skb->data;
+ slot = tx_mhdr->cookie;
+ skb_pull(skb, sizeof(struct tx_mgmt_hdr));
+ } else if ((tx_ctl->epid == priv->data_bk_ep) ||
+ (tx_ctl->epid == priv->data_be_ep) ||
+ (tx_ctl->epid == priv->data_vi_ep) ||
+ (tx_ctl->epid == priv->data_vo_ep) ||
+ (tx_ctl->epid == priv->cab_ep)) {
+ struct tx_frame_hdr *tx_fhdr =
+ (struct tx_frame_hdr *)skb->data;
+ slot = tx_fhdr->cookie;
+ skb_pull(skb, sizeof(struct tx_frame_hdr));
+ } else {
+ ath_err(common, "Unsupported EPID: %d\n", tx_ctl->epid);
+ slot = -EINVAL;
+ }
+
+ return slot;
+}
+
int ath_htc_txq_update(struct ath9k_htc_priv *priv, int qnum,
struct ath9k_tx_queue_info *qinfo)
{
@@ -79,23 +211,140 @@
return error;
}
-int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb)
+static void ath9k_htc_tx_mgmt(struct ath9k_htc_priv *priv,
+ struct ath9k_htc_vif *avp,
+ struct sk_buff *skb,
+ u8 sta_idx, u8 vif_idx, u8 slot)
+{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_mgmt *mgmt;
+ struct ieee80211_hdr *hdr;
+ struct tx_mgmt_hdr mgmt_hdr;
+ struct ath9k_htc_tx_ctl *tx_ctl;
+ u8 *tx_fhdr;
+
+ tx_ctl = HTC_SKB_CB(skb);
+ hdr = (struct ieee80211_hdr *) skb->data;
+
+ memset(tx_ctl, 0, sizeof(*tx_ctl));
+ memset(&mgmt_hdr, 0, sizeof(struct tx_mgmt_hdr));
+
+ /*
+ * Set the TSF adjust value for probe response
+ * frame also.
+ */
+ if (avp && unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
+ mgmt = (struct ieee80211_mgmt *)skb->data;
+ mgmt->u.probe_resp.timestamp = avp->tsfadjust;
+ }
+
+ tx_ctl->type = ATH9K_HTC_MGMT;
+
+ mgmt_hdr.node_idx = sta_idx;
+ mgmt_hdr.vif_idx = vif_idx;
+ mgmt_hdr.tidno = 0;
+ mgmt_hdr.flags = 0;
+ mgmt_hdr.cookie = slot;
+
+ mgmt_hdr.key_type = ath9k_cmn_get_hw_crypto_keytype(skb);
+ if (mgmt_hdr.key_type == ATH9K_KEY_TYPE_CLEAR)
+ mgmt_hdr.keyix = (u8) ATH9K_TXKEYIX_INVALID;
+ else
+ mgmt_hdr.keyix = tx_info->control.hw_key->hw_key_idx;
+
+ tx_fhdr = skb_push(skb, sizeof(mgmt_hdr));
+ memcpy(tx_fhdr, (u8 *) &mgmt_hdr, sizeof(mgmt_hdr));
+ tx_ctl->epid = priv->mgmt_ep;
+}
+
+static void ath9k_htc_tx_data(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif,
+ struct sk_buff *skb,
+ u8 sta_idx, u8 vif_idx, u8 slot,
+ bool is_cab)
+{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr;
+ struct ath9k_htc_tx_ctl *tx_ctl;
+ struct tx_frame_hdr tx_hdr;
+ u32 flags = 0;
+ u8 *qc, *tx_fhdr;
+ u16 qnum;
+
+ tx_ctl = HTC_SKB_CB(skb);
+ hdr = (struct ieee80211_hdr *) skb->data;
+
+ memset(tx_ctl, 0, sizeof(*tx_ctl));
+ memset(&tx_hdr, 0, sizeof(struct tx_frame_hdr));
+
+ tx_hdr.node_idx = sta_idx;
+ tx_hdr.vif_idx = vif_idx;
+ tx_hdr.cookie = slot;
+
+ /*
+ * This is a bit redundant but it helps to get
+ * the per-packet index quickly when draining the
+ * TX queue in the HIF layer. Otherwise we would
+ * have to parse the packet contents ...
+ */
+ tx_ctl->sta_idx = sta_idx;
+
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ tx_ctl->type = ATH9K_HTC_AMPDU;
+ tx_hdr.data_type = ATH9K_HTC_AMPDU;
+ } else {
+ tx_ctl->type = ATH9K_HTC_NORMAL;
+ tx_hdr.data_type = ATH9K_HTC_NORMAL;
+ }
+
+ if (ieee80211_is_data_qos(hdr->frame_control)) {
+ qc = ieee80211_get_qos_ctl(hdr);
+ tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ }
+
+ /* Check for RTS protection */
+ if (priv->hw->wiphy->rts_threshold != (u32) -1)
+ if (skb->len > priv->hw->wiphy->rts_threshold)
+ flags |= ATH9K_HTC_TX_RTSCTS;
+
+ /* CTS-to-self */
+ if (!(flags & ATH9K_HTC_TX_RTSCTS) &&
+ (vif && vif->bss_conf.use_cts_prot))
+ flags |= ATH9K_HTC_TX_CTSONLY;
+
+ tx_hdr.flags = cpu_to_be32(flags);
+ tx_hdr.key_type = ath9k_cmn_get_hw_crypto_keytype(skb);
+ if (tx_hdr.key_type == ATH9K_KEY_TYPE_CLEAR)
+ tx_hdr.keyix = (u8) ATH9K_TXKEYIX_INVALID;
+ else
+ tx_hdr.keyix = tx_info->control.hw_key->hw_key_idx;
+
+ tx_fhdr = skb_push(skb, sizeof(tx_hdr));
+ memcpy(tx_fhdr, (u8 *) &tx_hdr, sizeof(tx_hdr));
+
+ if (is_cab) {
+ CAB_STAT_INC;
+ tx_ctl->epid = priv->cab_ep;
+ return;
+ }
+
+ qnum = skb_get_queue_mapping(skb);
+ tx_ctl->epid = get_htc_epid(priv, qnum);
+}
+
+int ath9k_htc_tx_start(struct ath9k_htc_priv *priv,
+ struct sk_buff *skb,
+ u8 slot, bool is_cab)
{
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_sta *sta = tx_info->control.sta;
struct ieee80211_vif *vif = tx_info->control.vif;
struct ath9k_htc_sta *ista;
- struct ath9k_htc_vif *avp;
- struct ath9k_htc_tx_ctl tx_ctl;
- enum htc_endpoint_id epid;
- u16 qnum;
- __le16 fc;
- u8 *tx_fhdr;
+ struct ath9k_htc_vif *avp = NULL;
u8 sta_idx, vif_idx;
hdr = (struct ieee80211_hdr *) skb->data;
- fc = hdr->frame_control;
/*
* Find out on which interface this packet has to be
@@ -124,218 +373,430 @@
sta_idx = priv->vif_sta_pos[vif_idx];
}
- memset(&tx_ctl, 0, sizeof(struct ath9k_htc_tx_ctl));
+ if (ieee80211_is_data(hdr->frame_control))
+ ath9k_htc_tx_data(priv, vif, skb,
+ sta_idx, vif_idx, slot, is_cab);
+ else
+ ath9k_htc_tx_mgmt(priv, avp, skb,
+ sta_idx, vif_idx, slot);
- if (ieee80211_is_data(fc)) {
- struct tx_frame_hdr tx_hdr;
- u32 flags = 0;
- u8 *qc;
- memset(&tx_hdr, 0, sizeof(struct tx_frame_hdr));
-
- tx_hdr.node_idx = sta_idx;
- tx_hdr.vif_idx = vif_idx;
-
- if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
- tx_ctl.type = ATH9K_HTC_AMPDU;
- tx_hdr.data_type = ATH9K_HTC_AMPDU;
- } else {
- tx_ctl.type = ATH9K_HTC_NORMAL;
- tx_hdr.data_type = ATH9K_HTC_NORMAL;
- }
-
- if (ieee80211_is_data_qos(fc)) {
- qc = ieee80211_get_qos_ctl(hdr);
- tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- }
-
- /* Check for RTS protection */
- if (priv->hw->wiphy->rts_threshold != (u32) -1)
- if (skb->len > priv->hw->wiphy->rts_threshold)
- flags |= ATH9K_HTC_TX_RTSCTS;
-
- /* CTS-to-self */
- if (!(flags & ATH9K_HTC_TX_RTSCTS) &&
- (vif && vif->bss_conf.use_cts_prot))
- flags |= ATH9K_HTC_TX_CTSONLY;
-
- tx_hdr.flags = cpu_to_be32(flags);
- tx_hdr.key_type = ath9k_cmn_get_hw_crypto_keytype(skb);
- if (tx_hdr.key_type == ATH9K_KEY_TYPE_CLEAR)
- tx_hdr.keyix = (u8) ATH9K_TXKEYIX_INVALID;
- else
- tx_hdr.keyix = tx_info->control.hw_key->hw_key_idx;
-
- tx_fhdr = skb_push(skb, sizeof(tx_hdr));
- memcpy(tx_fhdr, (u8 *) &tx_hdr, sizeof(tx_hdr));
-
- qnum = skb_get_queue_mapping(skb);
-
- switch (qnum) {
- case 0:
- TX_QSTAT_INC(WME_AC_VO);
- epid = priv->data_vo_ep;
- break;
- case 1:
- TX_QSTAT_INC(WME_AC_VI);
- epid = priv->data_vi_ep;
- break;
- case 2:
- TX_QSTAT_INC(WME_AC_BE);
- epid = priv->data_be_ep;
- break;
- case 3:
- default:
- TX_QSTAT_INC(WME_AC_BK);
- epid = priv->data_bk_ep;
- break;
- }
- } else {
- struct tx_mgmt_hdr mgmt_hdr;
-
- memset(&mgmt_hdr, 0, sizeof(struct tx_mgmt_hdr));
-
- tx_ctl.type = ATH9K_HTC_NORMAL;
-
- mgmt_hdr.node_idx = sta_idx;
- mgmt_hdr.vif_idx = vif_idx;
- mgmt_hdr.tidno = 0;
- mgmt_hdr.flags = 0;
-
- mgmt_hdr.key_type = ath9k_cmn_get_hw_crypto_keytype(skb);
- if (mgmt_hdr.key_type == ATH9K_KEY_TYPE_CLEAR)
- mgmt_hdr.keyix = (u8) ATH9K_TXKEYIX_INVALID;
- else
- mgmt_hdr.keyix = tx_info->control.hw_key->hw_key_idx;
-
- tx_fhdr = skb_push(skb, sizeof(mgmt_hdr));
- memcpy(tx_fhdr, (u8 *) &mgmt_hdr, sizeof(mgmt_hdr));
- epid = priv->mgmt_ep;
- }
-
- return htc_send(priv->htc, skb, epid, &tx_ctl);
+ return htc_send(priv->htc, skb);
}
-static bool ath9k_htc_check_tx_aggr(struct ath9k_htc_priv *priv,
- struct ath9k_htc_sta *ista, u8 tid)
+static inline bool __ath9k_htc_check_tx_aggr(struct ath9k_htc_priv *priv,
+ struct ath9k_htc_sta *ista, u8 tid)
{
bool ret = false;
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_bh(&priv->tx.tx_lock);
if ((tid < ATH9K_HTC_MAX_TID) && (ista->tid_state[tid] == AGGR_STOP))
ret = true;
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_bh(&priv->tx.tx_lock);
return ret;
}
-void ath9k_tx_tasklet(unsigned long data)
+static void ath9k_htc_check_tx_aggr(struct ath9k_htc_priv *priv,
+ struct ieee80211_vif *vif,
+ struct sk_buff *skb)
{
- struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *)data;
- struct ieee80211_vif *vif;
struct ieee80211_sta *sta;
struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *tx_info;
- struct sk_buff *skb = NULL;
__le16 fc;
- while ((skb = skb_dequeue(&priv->tx_queue)) != NULL) {
+ hdr = (struct ieee80211_hdr *) skb->data;
+ fc = hdr->frame_control;
- hdr = (struct ieee80211_hdr *) skb->data;
- fc = hdr->frame_control;
- tx_info = IEEE80211_SKB_CB(skb);
- vif = tx_info->control.vif;
+ rcu_read_lock();
- memset(&tx_info->status, 0, sizeof(tx_info->status));
+ sta = ieee80211_find_sta(vif, hdr->addr1);
+ if (!sta) {
+ rcu_read_unlock();
+ return;
+ }
- if (!vif)
- goto send_mac80211;
+ if (sta && conf_is_ht(&priv->hw->conf) &&
+ !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
+ if (ieee80211_is_data_qos(fc)) {
+ u8 *qc, tid;
+ struct ath9k_htc_sta *ista;
- rcu_read_lock();
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
+ ista = (struct ath9k_htc_sta *)sta->drv_priv;
+ if (__ath9k_htc_check_tx_aggr(priv, ista, tid)) {
+ ieee80211_start_tx_ba_session(sta, tid, 0);
+ spin_lock_bh(&priv->tx.tx_lock);
+ ista->tid_state[tid] = AGGR_PROGRESS;
+ spin_unlock_bh(&priv->tx.tx_lock);
+ }
+ }
+ }
- sta = ieee80211_find_sta(vif, hdr->addr1);
- if (!sta) {
- rcu_read_unlock();
- ieee80211_tx_status(priv->hw, skb);
+ rcu_read_unlock();
+}
+
+static void ath9k_htc_tx_process(struct ath9k_htc_priv *priv,
+ struct sk_buff *skb,
+ struct __wmi_event_txstatus *txs)
+{
+ struct ieee80211_vif *vif;
+ struct ath9k_htc_tx_ctl *tx_ctl;
+ struct ieee80211_tx_info *tx_info;
+ struct ieee80211_tx_rate *rate;
+ struct ieee80211_conf *cur_conf = &priv->hw->conf;
+ bool txok;
+ int slot;
+
+ slot = strip_drv_header(priv, skb);
+ if (slot < 0) {
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
+ tx_ctl = HTC_SKB_CB(skb);
+ txok = tx_ctl->txok;
+ tx_info = IEEE80211_SKB_CB(skb);
+ vif = tx_info->control.vif;
+ rate = &tx_info->status.rates[0];
+
+ memset(&tx_info->status, 0, sizeof(tx_info->status));
+
+ /*
+ * URB submission failed for this frame, it never reached
+ * the target.
+ */
+ if (!txok || !vif || !txs)
+ goto send_mac80211;
+
+ if (txs->ts_flags & ATH9K_HTC_TXSTAT_ACK)
+ tx_info->flags |= IEEE80211_TX_STAT_ACK;
+
+ if (txs->ts_flags & ATH9K_HTC_TXSTAT_FILT)
+ tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+
+ if (txs->ts_flags & ATH9K_HTC_TXSTAT_RTC_CTS)
+ rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS;
+
+ rate->count = 1;
+ rate->idx = MS(txs->ts_rate, ATH9K_HTC_TXSTAT_RATE);
+
+ if (txs->ts_flags & ATH9K_HTC_TXSTAT_MCS) {
+ rate->flags |= IEEE80211_TX_RC_MCS;
+
+ if (txs->ts_flags & ATH9K_HTC_TXSTAT_CW40)
+ rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ if (txs->ts_flags & ATH9K_HTC_TXSTAT_SGI)
+ rate->flags |= IEEE80211_TX_RC_SHORT_GI;
+ } else {
+ if (cur_conf->channel->band == IEEE80211_BAND_5GHZ)
+ rate->idx += 4; /* No CCK rates */
+ }
+
+ ath9k_htc_check_tx_aggr(priv, vif, skb);
+
+send_mac80211:
+ spin_lock_bh(&priv->tx.tx_lock);
+ if (WARN_ON(--priv->tx.queued_cnt < 0))
+ priv->tx.queued_cnt = 0;
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ ath9k_htc_tx_clear_slot(priv, slot);
+
+ /* Send status to mac80211 */
+ ieee80211_tx_status(priv->hw, skb);
+}
+
+static inline void ath9k_htc_tx_drainq(struct ath9k_htc_priv *priv,
+ struct sk_buff_head *queue)
+{
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(queue)) != NULL) {
+ ath9k_htc_tx_process(priv, skb, NULL);
+ }
+}
+
+void ath9k_htc_tx_drain(struct ath9k_htc_priv *priv)
+{
+ struct ath9k_htc_tx_event *event, *tmp;
+
+ spin_lock_bh(&priv->tx.tx_lock);
+ priv->tx.flags |= ATH9K_HTC_OP_TX_DRAIN;
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ /*
+ * Ensure that all pending TX frames are flushed,
+ * and that the TX completion/failed tasklets is killed.
+ */
+ htc_stop(priv->htc);
+ tasklet_kill(&priv->wmi->wmi_event_tasklet);
+ tasklet_kill(&priv->tx_failed_tasklet);
+
+ ath9k_htc_tx_drainq(priv, &priv->tx.mgmt_ep_queue);
+ ath9k_htc_tx_drainq(priv, &priv->tx.cab_ep_queue);
+ ath9k_htc_tx_drainq(priv, &priv->tx.data_be_queue);
+ ath9k_htc_tx_drainq(priv, &priv->tx.data_bk_queue);
+ ath9k_htc_tx_drainq(priv, &priv->tx.data_vi_queue);
+ ath9k_htc_tx_drainq(priv, &priv->tx.data_vo_queue);
+ ath9k_htc_tx_drainq(priv, &priv->tx.tx_failed);
+
+ /*
+ * The TX cleanup timer has already been killed.
+ */
+ spin_lock_bh(&priv->wmi->event_lock);
+ list_for_each_entry_safe(event, tmp, &priv->wmi->pending_tx_events, list) {
+ list_del(&event->list);
+ kfree(event);
+ }
+ spin_unlock_bh(&priv->wmi->event_lock);
+
+ spin_lock_bh(&priv->tx.tx_lock);
+ priv->tx.flags &= ~ATH9K_HTC_OP_TX_DRAIN;
+ spin_unlock_bh(&priv->tx.tx_lock);
+}
+
+void ath9k_tx_failed_tasklet(unsigned long data)
+{
+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *)data;
+
+ spin_lock_bh(&priv->tx.tx_lock);
+ if (priv->tx.flags & ATH9K_HTC_OP_TX_DRAIN) {
+ spin_unlock_bh(&priv->tx.tx_lock);
+ return;
+ }
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ ath9k_htc_tx_drainq(priv, &priv->tx.tx_failed);
+}
+
+static inline bool check_cookie(struct ath9k_htc_priv *priv,
+ struct sk_buff *skb,
+ u8 cookie, u8 epid)
+{
+ u8 fcookie = 0;
+
+ if (epid == priv->mgmt_ep) {
+ struct tx_mgmt_hdr *hdr;
+ hdr = (struct tx_mgmt_hdr *) skb->data;
+ fcookie = hdr->cookie;
+ } else if ((epid == priv->data_bk_ep) ||
+ (epid == priv->data_be_ep) ||
+ (epid == priv->data_vi_ep) ||
+ (epid == priv->data_vo_ep) ||
+ (epid == priv->cab_ep)) {
+ struct tx_frame_hdr *hdr;
+ hdr = (struct tx_frame_hdr *) skb->data;
+ fcookie = hdr->cookie;
+ }
+
+ if (fcookie == cookie)
+ return true;
+
+ return false;
+}
+
+static struct sk_buff* ath9k_htc_tx_get_packet(struct ath9k_htc_priv *priv,
+ struct __wmi_event_txstatus *txs)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct sk_buff_head *epid_queue;
+ struct sk_buff *skb, *tmp;
+ unsigned long flags;
+ u8 epid = MS(txs->ts_rate, ATH9K_HTC_TXSTAT_EPID);
+
+ epid_queue = get_htc_epid_queue(priv, epid);
+ if (!epid_queue)
+ return NULL;
+
+ spin_lock_irqsave(&epid_queue->lock, flags);
+ skb_queue_walk_safe(epid_queue, skb, tmp) {
+ if (check_cookie(priv, skb, txs->cookie, epid)) {
+ __skb_unlink(skb, epid_queue);
+ spin_unlock_irqrestore(&epid_queue->lock, flags);
+ return skb;
+ }
+ }
+ spin_unlock_irqrestore(&epid_queue->lock, flags);
+
+ ath_dbg(common, ATH_DBG_XMIT,
+ "No matching packet for cookie: %d, epid: %d\n",
+ txs->cookie, epid);
+
+ return NULL;
+}
+
+void ath9k_htc_txstatus(struct ath9k_htc_priv *priv, void *wmi_event)
+{
+ struct wmi_event_txstatus *txs = (struct wmi_event_txstatus *)wmi_event;
+ struct __wmi_event_txstatus *__txs;
+ struct sk_buff *skb;
+ struct ath9k_htc_tx_event *tx_pend;
+ int i;
+
+ for (i = 0; i < txs->cnt; i++) {
+ WARN_ON(txs->cnt > HTC_MAX_TX_STATUS);
+
+ __txs = &txs->txstatus[i];
+
+ skb = ath9k_htc_tx_get_packet(priv, __txs);
+ if (!skb) {
+ /*
+ * Store this event, so that the TX cleanup
+ * routine can check later for the needed packet.
+ */
+ tx_pend = kzalloc(sizeof(struct ath9k_htc_tx_event),
+ GFP_ATOMIC);
+ if (!tx_pend)
+ continue;
+
+ memcpy(&tx_pend->txs, __txs,
+ sizeof(struct __wmi_event_txstatus));
+
+ spin_lock(&priv->wmi->event_lock);
+ list_add_tail(&tx_pend->list,
+ &priv->wmi->pending_tx_events);
+ spin_unlock(&priv->wmi->event_lock);
+
continue;
}
- /* Check if we need to start aggregation */
-
- if (sta && conf_is_ht(&priv->hw->conf) &&
- !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc, tid;
- struct ath9k_htc_sta *ista;
-
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
- ista = (struct ath9k_htc_sta *)sta->drv_priv;
-
- if (ath9k_htc_check_tx_aggr(priv, ista, tid)) {
- ieee80211_start_tx_ba_session(sta, tid, 0);
- spin_lock_bh(&priv->tx_lock);
- ista->tid_state[tid] = AGGR_PROGRESS;
- spin_unlock_bh(&priv->tx_lock);
- }
- }
- }
-
- rcu_read_unlock();
-
- send_mac80211:
- /* Send status to mac80211 */
- ieee80211_tx_status(priv->hw, skb);
+ ath9k_htc_tx_process(priv, skb, __txs);
}
/* Wake TX queues if needed */
- spin_lock_bh(&priv->tx_lock);
- if (priv->tx_queues_stop) {
- priv->tx_queues_stop = false;
- spin_unlock_bh(&priv->tx_lock);
- ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
- "Waking up TX queues\n");
- ieee80211_wake_queues(priv->hw);
- return;
- }
- spin_unlock_bh(&priv->tx_lock);
+ ath9k_htc_check_wake_queues(priv);
}
void ath9k_htc_txep(void *drv_priv, struct sk_buff *skb,
enum htc_endpoint_id ep_id, bool txok)
{
struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) drv_priv;
- struct ath_common *common = ath9k_hw_common(priv->ah);
- struct ieee80211_tx_info *tx_info;
+ struct ath9k_htc_tx_ctl *tx_ctl;
+ struct sk_buff_head *epid_queue;
- if (!skb)
+ tx_ctl = HTC_SKB_CB(skb);
+ tx_ctl->txok = txok;
+ tx_ctl->timestamp = jiffies;
+
+ if (!txok) {
+ skb_queue_tail(&priv->tx.tx_failed, skb);
+ tasklet_schedule(&priv->tx_failed_tasklet);
return;
+ }
- if (ep_id == priv->mgmt_ep) {
- skb_pull(skb, sizeof(struct tx_mgmt_hdr));
- } else if ((ep_id == priv->data_bk_ep) ||
- (ep_id == priv->data_be_ep) ||
- (ep_id == priv->data_vi_ep) ||
- (ep_id == priv->data_vo_ep)) {
- skb_pull(skb, sizeof(struct tx_frame_hdr));
- } else {
- ath_err(common, "Unsupported TX EPID: %d\n", ep_id);
+ epid_queue = get_htc_epid_queue(priv, ep_id);
+ if (!epid_queue) {
dev_kfree_skb_any(skb);
return;
}
- tx_info = IEEE80211_SKB_CB(skb);
+ skb_queue_tail(epid_queue, skb);
+}
- if (txok)
- tx_info->flags |= IEEE80211_TX_STAT_ACK;
+static inline bool check_packet(struct ath9k_htc_priv *priv, struct sk_buff *skb)
+{
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_tx_ctl *tx_ctl;
- skb_queue_tail(&priv->tx_queue, skb);
- tasklet_schedule(&priv->tx_tasklet);
+ tx_ctl = HTC_SKB_CB(skb);
+
+ if (time_after(jiffies,
+ tx_ctl->timestamp +
+ msecs_to_jiffies(ATH9K_HTC_TX_TIMEOUT_INTERVAL))) {
+ ath_dbg(common, ATH_DBG_XMIT,
+ "Dropping a packet due to TX timeout\n");
+ return true;
+ }
+
+ return false;
+}
+
+static void ath9k_htc_tx_cleanup_queue(struct ath9k_htc_priv *priv,
+ struct sk_buff_head *epid_queue)
+{
+ bool process = false;
+ unsigned long flags;
+ struct sk_buff *skb, *tmp;
+ struct sk_buff_head queue;
+
+ skb_queue_head_init(&queue);
+
+ spin_lock_irqsave(&epid_queue->lock, flags);
+ skb_queue_walk_safe(epid_queue, skb, tmp) {
+ if (check_packet(priv, skb)) {
+ __skb_unlink(skb, epid_queue);
+ __skb_queue_tail(&queue, skb);
+ process = true;
+ }
+ }
+ spin_unlock_irqrestore(&epid_queue->lock, flags);
+
+ if (process) {
+ skb_queue_walk_safe(&queue, skb, tmp) {
+ __skb_unlink(skb, &queue);
+ ath9k_htc_tx_process(priv, skb, NULL);
+ }
+ }
+}
+
+void ath9k_htc_tx_cleanup_timer(unsigned long data)
+{
+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) data;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_tx_event *event, *tmp;
+ struct sk_buff *skb;
+
+ spin_lock(&priv->wmi->event_lock);
+ list_for_each_entry_safe(event, tmp, &priv->wmi->pending_tx_events, list) {
+
+ skb = ath9k_htc_tx_get_packet(priv, &event->txs);
+ if (skb) {
+ ath_dbg(common, ATH_DBG_XMIT,
+ "Found packet for cookie: %d, epid: %d\n",
+ event->txs.cookie,
+ MS(event->txs.ts_rate, ATH9K_HTC_TXSTAT_EPID));
+
+ ath9k_htc_tx_process(priv, skb, &event->txs);
+ list_del(&event->list);
+ kfree(event);
+ continue;
+ }
+
+ if (++event->count >= ATH9K_HTC_TX_TIMEOUT_COUNT) {
+ list_del(&event->list);
+ kfree(event);
+ }
+ }
+ spin_unlock(&priv->wmi->event_lock);
+
+ /*
+ * Check if status-pending packets have to be cleaned up.
+ */
+ ath9k_htc_tx_cleanup_queue(priv, &priv->tx.mgmt_ep_queue);
+ ath9k_htc_tx_cleanup_queue(priv, &priv->tx.cab_ep_queue);
+ ath9k_htc_tx_cleanup_queue(priv, &priv->tx.data_be_queue);
+ ath9k_htc_tx_cleanup_queue(priv, &priv->tx.data_bk_queue);
+ ath9k_htc_tx_cleanup_queue(priv, &priv->tx.data_vi_queue);
+ ath9k_htc_tx_cleanup_queue(priv, &priv->tx.data_vo_queue);
+
+ /* Wake TX queues if needed */
+ ath9k_htc_check_wake_queues(priv);
+
+ mod_timer(&priv->tx.cleanup_timer,
+ jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));
}
int ath9k_tx_init(struct ath9k_htc_priv *priv)
{
- skb_queue_head_init(&priv->tx_queue);
+ skb_queue_head_init(&priv->tx.mgmt_ep_queue);
+ skb_queue_head_init(&priv->tx.cab_ep_queue);
+ skb_queue_head_init(&priv->tx.data_be_queue);
+ skb_queue_head_init(&priv->tx.data_bk_queue);
+ skb_queue_head_init(&priv->tx.data_vi_queue);
+ skb_queue_head_init(&priv->tx.data_vo_queue);
+ skb_queue_head_init(&priv->tx.tx_failed);
return 0;
}
@@ -507,8 +968,9 @@
int last_rssi = ATH_RSSI_DUMMY_MARKER;
__le16 fc;
- if (skb->len <= HTC_RX_FRAME_HEADER_SIZE) {
- ath_err(common, "Corrupted RX frame, dropping\n");
+ if (skb->len < HTC_RX_FRAME_HEADER_SIZE) {
+ ath_err(common, "Corrupted RX frame, dropping (len: %d)\n",
+ skb->len);
goto rx_next;
}
@@ -522,6 +984,8 @@
goto rx_next;
}
+ ath9k_htc_err_stat_rx(priv, rxstatus);
+
/* Get the RX status information */
memcpy(&rxbuf->rxstatus, rxstatus, HTC_RX_FRAME_HEADER_SIZE);
skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE);
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 62e139a..cee970f 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -17,8 +17,8 @@
#include "htc.h"
static int htc_issue_send(struct htc_target *target, struct sk_buff* skb,
- u16 len, u8 flags, u8 epid,
- struct ath9k_htc_tx_ctl *tx_ctl)
+ u16 len, u8 flags, u8 epid)
+
{
struct htc_frame_hdr *hdr;
struct htc_endpoint *endpoint = &target->endpoint[epid];
@@ -30,8 +30,8 @@
hdr->flags = flags;
hdr->payload_len = cpu_to_be16(len);
- status = target->hif->send(target->hif_dev, endpoint->ul_pipeid, skb,
- tx_ctl);
+ status = target->hif->send(target->hif_dev, endpoint->ul_pipeid, skb);
+
return status;
}
@@ -162,7 +162,7 @@
target->htc_flags |= HTC_OP_CONFIG_PIPE_CREDITS;
- ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0, NULL);
+ ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0);
if (ret)
goto err;
@@ -197,7 +197,7 @@
target->htc_flags |= HTC_OP_START_WAIT;
- ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0, NULL);
+ ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0);
if (ret)
goto err;
@@ -268,7 +268,7 @@
conn_msg->dl_pipeid = endpoint->dl_pipeid;
conn_msg->ul_pipeid = endpoint->ul_pipeid;
- ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0, NULL);
+ ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0);
if (ret)
goto err;
@@ -286,35 +286,33 @@
return ret;
}
-int htc_send(struct htc_target *target, struct sk_buff *skb,
- enum htc_endpoint_id epid, struct ath9k_htc_tx_ctl *tx_ctl)
+int htc_send(struct htc_target *target, struct sk_buff *skb)
{
- return htc_issue_send(target, skb, skb->len, 0, epid, tx_ctl);
+ struct ath9k_htc_tx_ctl *tx_ctl;
+
+ tx_ctl = HTC_SKB_CB(skb);
+ return htc_issue_send(target, skb, skb->len, 0, tx_ctl->epid);
+}
+
+int htc_send_epid(struct htc_target *target, struct sk_buff *skb,
+ enum htc_endpoint_id epid)
+{
+ return htc_issue_send(target, skb, skb->len, 0, epid);
}
void htc_stop(struct htc_target *target)
{
- enum htc_endpoint_id epid;
- struct htc_endpoint *endpoint;
-
- for (epid = ENDPOINT0; epid < ENDPOINT_MAX; epid++) {
- endpoint = &target->endpoint[epid];
- if (endpoint->service_id != 0)
- target->hif->stop(target->hif_dev, endpoint->ul_pipeid);
- }
+ target->hif->stop(target->hif_dev);
}
void htc_start(struct htc_target *target)
{
- enum htc_endpoint_id epid;
- struct htc_endpoint *endpoint;
+ target->hif->start(target->hif_dev);
+}
- for (epid = ENDPOINT0; epid < ENDPOINT_MAX; epid++) {
- endpoint = &target->endpoint[epid];
- if (endpoint->service_id != 0)
- target->hif->start(target->hif_dev,
- endpoint->ul_pipeid);
- }
+void htc_sta_drain(struct htc_target *target, u8 idx)
+{
+ target->hif->sta_drain(target->hif_dev, idx);
}
void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle,
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.h b/drivers/net/wireless/ath/ath9k/htc_hst.h
index ecd0187..91a5305 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.h
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.h
@@ -33,10 +33,10 @@
u8 control_dl_pipe;
u8 control_ul_pipe;
- void (*start) (void *hif_handle, u8 pipe);
- void (*stop) (void *hif_handle, u8 pipe);
- int (*send) (void *hif_handle, u8 pipe, struct sk_buff *buf,
- struct ath9k_htc_tx_ctl *tx_ctl);
+ void (*start) (void *hif_handle);
+ void (*stop) (void *hif_handle);
+ void (*sta_drain) (void *hif_handle, u8 idx);
+ int (*send) (void *hif_handle, u8 pipe, struct sk_buff *buf);
};
enum htc_endpoint_id {
@@ -83,21 +83,10 @@
void (*rx) (void *, struct sk_buff *, enum htc_endpoint_id);
};
-#define HTC_TX_QUEUE_SIZE 256
-
-struct htc_txq {
- struct sk_buff *buf[HTC_TX_QUEUE_SIZE];
- u32 txqdepth;
- u16 txbuf_cnt;
- u16 txq_head;
- u16 txq_tail;
-};
-
struct htc_endpoint {
u16 service_id;
struct htc_ep_callbacks ep_callbacks;
- struct htc_txq htc_txq;
u32 max_txqdepth;
int max_msglen;
@@ -205,10 +194,12 @@
int htc_connect_service(struct htc_target *target,
struct htc_service_connreq *service_connreq,
enum htc_endpoint_id *conn_rsp_eid);
-int htc_send(struct htc_target *target, struct sk_buff *skb,
- enum htc_endpoint_id eid, struct ath9k_htc_tx_ctl *tx_ctl);
+int htc_send(struct htc_target *target, struct sk_buff *skb);
+int htc_send_epid(struct htc_target *target, struct sk_buff *skb,
+ enum htc_endpoint_id epid);
void htc_stop(struct htc_target *target);
void htc_start(struct htc_target *target);
+void htc_sta_drain(struct htc_target *target, u8 idx);
void ath9k_htc_rx_msg(struct htc_target *htc_handle,
struct sk_buff *skb, u32 len, u8 pipe_id);
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index c8f254f..8b8f044 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -116,16 +116,21 @@
ath9k_hw_ops(ah)->clr11n_aggr(ah, ds);
}
-static inline void ath9k_hw_set11n_burstduration(struct ath_hw *ah, void *ds,
- u32 burstDuration)
+static inline void ath9k_hw_set_clrdmask(struct ath_hw *ah, void *ds, bool val)
{
- ath9k_hw_ops(ah)->set11n_burstduration(ah, ds, burstDuration);
+ ath9k_hw_ops(ah)->set_clrdmask(ah, ds, val);
}
-static inline void ath9k_hw_set11n_virtualmorefrag(struct ath_hw *ah, void *ds,
- u32 vmf)
+static inline void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+ struct ath_hw_antcomb_conf *antconf)
{
- ath9k_hw_ops(ah)->set11n_virtualmorefrag(ah, ds, vmf);
+ ath9k_hw_ops(ah)->antdiv_comb_conf_get(ah, antconf);
+}
+
+static inline void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+ struct ath_hw_antcomb_conf *antconf)
+{
+ ath9k_hw_ops(ah)->antdiv_comb_conf_set(ah, antconf);
}
/* Private hardware call ops */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index c95bc5c..b75b5dc 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -130,6 +130,20 @@
}
EXPORT_SYMBOL(ath9k_hw_wait);
+void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
+ int column, unsigned int *writecnt)
+{
+ int r;
+
+ ENABLE_REGWRITE_BUFFER(ah);
+ for (r = 0; r < array->ia_rows; r++) {
+ REG_WRITE(ah, INI_RA(array, r, 0),
+ INI_RA(array, r, column));
+ DO_DELAY(*writecnt);
+ }
+ REGWRITE_BUFFER_FLUSH(ah);
+}
+
u32 ath9k_hw_reverse_bits(u32 val, u32 n)
{
u32 retval;
@@ -142,25 +156,6 @@
return retval;
}
-bool ath9k_get_channel_edges(struct ath_hw *ah,
- u16 flags, u16 *low,
- u16 *high)
-{
- struct ath9k_hw_capabilities *pCap = &ah->caps;
-
- if (flags & CHANNEL_5GHZ) {
- *low = pCap->low_5ghz_chan;
- *high = pCap->high_5ghz_chan;
- return true;
- }
- if ((flags & CHANNEL_2GHZ)) {
- *low = pCap->low_2ghz_chan;
- *high = pCap->high_2ghz_chan;
- return true;
- }
- return false;
-}
-
u16 ath9k_hw_computetxtime(struct ath_hw *ah,
u8 phy, int kbps,
u32 frameLen, u16 rateix,
@@ -252,6 +247,17 @@
{
u32 val;
+ switch (ah->hw_version.devid) {
+ case AR5416_AR9100_DEVID:
+ ah->hw_version.macVersion = AR_SREV_VERSION_9100;
+ break;
+ case AR9300_DEVID_AR9340:
+ ah->hw_version.macVersion = AR_SREV_VERSION_9340;
+ val = REG_READ(ah, AR_SREV);
+ ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
+ return;
+ }
+
val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
if (val == 0xFF) {
@@ -364,11 +370,6 @@
ah->config.spurchans[i][1] = AR_NO_SPUR;
}
- if (ah->hw_version.devid != AR2427_DEVID_PCIE)
- ah->config.ht_enable = 1;
- else
- ah->config.ht_enable = 0;
-
/* PAPRD needs some more work to be enabled */
ah->config.paprd_disable = 1;
@@ -410,6 +411,8 @@
ah->sta_id1_defaults =
AR_STA_ID1_CRPT_MIC_ENABLE |
AR_STA_ID1_MCAST_KSRCH;
+ if (AR_SREV_9100(ah))
+ ah->sta_id1_defaults |= AR_STA_ID1_AR9100_BA_FIX;
ah->enable_32kHz_clock = DONT_USE_32KHZ;
ah->slottime = 20;
ah->globaltxtimeout = (u32) -1;
@@ -470,7 +473,7 @@
return ecode;
}
- if (!AR_SREV_9100(ah)) {
+ if (!AR_SREV_9100(ah) && !AR_SREV_9340(ah)) {
ath9k_hw_ani_setup(ah);
ath9k_hw_ani_init(ah);
}
@@ -492,9 +495,6 @@
struct ath_common *common = ath9k_hw_common(ah);
int r = 0;
- if (ah->hw_version.devid == AR5416_AR9100_DEVID)
- ah->hw_version.macVersion = AR_SREV_VERSION_9100;
-
ath9k_hw_read_revisions(ah);
/*
@@ -552,6 +552,7 @@
case AR_SREV_VERSION_9271:
case AR_SREV_VERSION_9300:
case AR_SREV_VERSION_9485:
+ case AR_SREV_VERSION_9340:
break;
default:
ath_err(common,
@@ -560,7 +561,7 @@
return -EOPNOTSUPP;
}
- if (AR_SREV_9271(ah) || AR_SREV_9100(ah))
+ if (AR_SREV_9271(ah) || AR_SREV_9100(ah) || AR_SREV_9340(ah))
ah->is_pciexpress = false;
ah->hw_version.phyRev = REG_READ(ah, AR_PHY_CHIP_ID);
@@ -629,6 +630,7 @@
case AR2427_DEVID_PCIE:
case AR9300_DEVID_PCIE:
case AR9300_DEVID_AR9485_PCIE:
+ case AR9300_DEVID_AR9340:
break;
default:
if (common->bus_ops->ath_bus_type == ATH_USB)
@@ -671,48 +673,89 @@
REGWRITE_BUFFER_FLUSH(ah);
}
-unsigned long ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
+u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
{
- REG_WRITE(ah, PLL3, (REG_READ(ah, PLL3) & ~(PLL3_DO_MEAS_MASK)));
+ REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
+ udelay(100);
+ REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
+
+ while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
udelay(100);
- REG_WRITE(ah, PLL3, (REG_READ(ah, PLL3) | PLL3_DO_MEAS_MASK));
- while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
- udelay(100);
-
- return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
+ return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
}
EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc);
-#define DPLL2_KD_VAL 0x3D
-#define DPLL2_KI_VAL 0x06
-#define DPLL3_PHASE_SHIFT_VAL 0x1
-
static void ath9k_hw_init_pll(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 pll;
if (AR_SREV_9485(ah)) {
- REG_WRITE(ah, AR_RTC_PLL_CONTROL2, 0x886666);
- REG_WRITE(ah, AR_CH0_DDR_DPLL2, 0x19e82f01);
- REG_RMW_FIELD(ah, AR_CH0_DDR_DPLL3,
- AR_CH0_DPLL3_PHASE_SHIFT, DPLL3_PHASE_SHIFT_VAL);
+ /* program BB PLL ki and kd value, ki=0x4, kd=0x40 */
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_BB_DPLL2_PLL_PWD, 0x1);
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_DPLL2_KD, 0x40);
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_DPLL2_KI, 0x4);
+
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL1,
+ AR_CH0_BB_DPLL1_REFDIV, 0x5);
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL1,
+ AR_CH0_BB_DPLL1_NINI, 0x58);
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL1,
+ AR_CH0_BB_DPLL1_NFRAC, 0x0);
+
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_BB_DPLL2_OUTDIV, 0x1);
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_BB_DPLL2_LOCAL_PLL, 0x1);
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_BB_DPLL2_EN_NEGTRIG, 0x1);
+
+ /* program BB PLL phase_shift to 0x6 */
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL3,
+ AR_CH0_BB_DPLL3_PHASE_SHIFT, 0x6);
+
+ REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
+ AR_CH0_BB_DPLL2_PLL_PWD, 0x0);
+ udelay(1000);
+ } else if (AR_SREV_9340(ah)) {
+ u32 regval, pll2_divint, pll2_divfrac, refdiv;
REG_WRITE(ah, AR_RTC_PLL_CONTROL, 0x1142c);
udelay(1000);
- REG_WRITE(ah, AR_RTC_PLL_CONTROL2, 0x886666);
+ REG_SET_BIT(ah, AR_PHY_PLL_MODE, 0x1 << 16);
+ udelay(100);
- REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
- AR_CH0_DPLL2_KD, DPLL2_KD_VAL);
- REG_RMW_FIELD(ah, AR_CH0_BB_DPLL2,
- AR_CH0_DPLL2_KI, DPLL2_KI_VAL);
+ if (ah->is_clk_25mhz) {
+ pll2_divint = 0x54;
+ pll2_divfrac = 0x1eb85;
+ refdiv = 3;
+ } else {
+ pll2_divint = 88;
+ pll2_divfrac = 0;
+ refdiv = 5;
+ }
- REG_RMW_FIELD(ah, AR_CH0_BB_DPLL3,
- AR_CH0_DPLL3_PHASE_SHIFT, DPLL3_PHASE_SHIFT_VAL);
- REG_WRITE(ah, AR_RTC_PLL_CONTROL, 0x142c);
+ regval = REG_READ(ah, AR_PHY_PLL_MODE);
+ regval |= (0x1 << 16);
+ REG_WRITE(ah, AR_PHY_PLL_MODE, regval);
+ udelay(100);
+
+ REG_WRITE(ah, AR_PHY_PLL_CONTROL, (refdiv << 27) |
+ (pll2_divint << 18) | pll2_divfrac);
+ udelay(100);
+
+ regval = REG_READ(ah, AR_PHY_PLL_MODE);
+ regval = (regval & 0x80071fff) | (0x1 << 30) | (0x1 << 13) |
+ (0x4 << 26) | (0x18 << 19);
+ REG_WRITE(ah, AR_PHY_PLL_MODE, regval);
+ REG_WRITE(ah, AR_PHY_PLL_MODE,
+ REG_READ(ah, AR_PHY_PLL_MODE) & 0xfffeffff);
udelay(1000);
}
@@ -720,6 +763,9 @@
REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);
+ if (AR_SREV_9485(ah) || AR_SREV_9340(ah))
+ udelay(1000);
+
/* Switch the core clock for ar9271 to 117Mhz */
if (AR_SREV_9271(ah)) {
udelay(500);
@@ -729,17 +775,34 @@
udelay(RTC_PLL_SETTLE_DELAY);
REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
+
+ if (AR_SREV_9340(ah)) {
+ if (ah->is_clk_25mhz) {
+ REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
+ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+ REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+ } else {
+ REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
+ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+ REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+ }
+ udelay(100);
+ }
}
static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
enum nl80211_iftype opmode)
{
+ u32 sync_default = AR_INTR_SYNC_DEFAULT;
u32 imr_reg = AR_IMR_TXERR |
AR_IMR_TXURN |
AR_IMR_RXERR |
AR_IMR_RXORN |
AR_IMR_BCNMISC;
+ if (AR_SREV_9340(ah))
+ sync_default &= ~AR_INTR_SYNC_HOST1_FATAL;
+
if (AR_SREV_9300_20_OR_LATER(ah)) {
imr_reg |= AR_IMR_RXOK_HP;
if (ah->config.rx_intr_mitigation)
@@ -770,7 +833,7 @@
if (!AR_SREV_9100(ah)) {
REG_WRITE(ah, AR_INTR_SYNC_CAUSE, 0xFFFFFFFF);
- REG_WRITE(ah, AR_INTR_SYNC_ENABLE, AR_INTR_SYNC_DEFAULT);
+ REG_WRITE(ah, AR_INTR_SYNC_ENABLE, sync_default);
REG_WRITE(ah, AR_INTR_SYNC_MASK, 0);
}
@@ -830,8 +893,7 @@
ah->misc_mode);
if (ah->misc_mode != 0)
- REG_WRITE(ah, AR_PCU_MISC,
- REG_READ(ah, AR_PCU_MISC) | ah->misc_mode);
+ REG_SET_BIT(ah, AR_PCU_MISC, ah->misc_mode);
if (conf->channel && conf->channel->band == IEEE80211_BAND_5GHZ)
sifstime = 16;
@@ -899,23 +961,19 @@
static inline void ath9k_hw_set_dma(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
- u32 regval;
ENABLE_REGWRITE_BUFFER(ah);
/*
* set AHB_MODE not to do cacheline prefetches
*/
- if (!AR_SREV_9300_20_OR_LATER(ah)) {
- regval = REG_READ(ah, AR_AHB_MODE);
- REG_WRITE(ah, AR_AHB_MODE, regval | AR_AHB_PREFETCH_RD_EN);
- }
+ if (!AR_SREV_9300_20_OR_LATER(ah))
+ REG_SET_BIT(ah, AR_AHB_MODE, AR_AHB_PREFETCH_RD_EN);
/*
* let mac dma reads be in 128 byte chunks
*/
- regval = REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK;
- REG_WRITE(ah, AR_TXCFG, regval | AR_TXCFG_DMASZ_128B);
+ REG_RMW(ah, AR_TXCFG, AR_TXCFG_DMASZ_128B, AR_TXCFG_DMASZ_MASK);
REGWRITE_BUFFER_FLUSH(ah);
@@ -932,8 +990,7 @@
/*
* let mac dma writes be in 128 byte chunks
*/
- regval = REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK;
- REG_WRITE(ah, AR_RXCFG, regval | AR_RXCFG_DMASZ_128B);
+ REG_RMW(ah, AR_RXCFG, AR_RXCFG_DMASZ_128B, AR_RXCFG_DMASZ_MASK);
/*
* Setup receive FIFO threshold to hold off TX activities
@@ -972,30 +1029,27 @@
static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode)
{
- u32 val;
+ u32 mask = AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC;
+ u32 set = AR_STA_ID1_KSRCH_MODE;
- val = REG_READ(ah, AR_STA_ID1);
- val &= ~(AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC);
switch (opmode) {
- case NL80211_IFTYPE_AP:
- REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_STA_AP
- | AR_STA_ID1_KSRCH_MODE);
- REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
- break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
- REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC
- | AR_STA_ID1_KSRCH_MODE);
+ set |= AR_STA_ID1_ADHOC;
REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
break;
+ case NL80211_IFTYPE_AP:
+ set |= AR_STA_ID1_STA_AP;
+ /* fall through */
case NL80211_IFTYPE_STATION:
- REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+ REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
break;
default:
- if (ah->is_monitoring)
- REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+ if (!ah->is_monitoring)
+ set = 0;
break;
}
+ REG_RMW(ah, AR_STA_ID1, set, mask);
}
void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
@@ -1021,10 +1075,8 @@
u32 tmpReg;
if (AR_SREV_9100(ah)) {
- u32 val = REG_READ(ah, AR_RTC_DERIVED_CLK);
- val &= ~AR_RTC_DERIVED_CLK_PERIOD;
- val |= SM(1, AR_RTC_DERIVED_CLK_PERIOD);
- REG_WRITE(ah, AR_RTC_DERIVED_CLK, val);
+ REG_RMW_FIELD(ah, AR_RTC_DERIVED_CLK,
+ AR_RTC_DERIVED_CLK_PERIOD, 1);
(void)REG_READ(ah, AR_RTC_DERIVED_CLK);
}
@@ -1212,6 +1264,20 @@
return true;
}
+static void ath9k_hw_apply_gpio_override(struct ath_hw *ah)
+{
+ u32 gpio_mask = ah->gpio_mask;
+ int i;
+
+ for (i = 0; gpio_mask; i++, gpio_mask >>= 1) {
+ if (!(gpio_mask & 1))
+ continue;
+
+ ath9k_hw_cfg_output(ah, i, AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+ ath9k_hw_set_gpio(ah, i, !!(ah->gpio_val & BIT(i)));
+ }
+}
+
bool ath9k_hw_check_alive(struct ath_hw *ah)
{
int count = 50;
@@ -1409,7 +1475,7 @@
REGWRITE_BUFFER_FLUSH(ah);
ah->intr_txqs = 0;
- for (i = 0; i < ah->caps.total_queues; i++)
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
ath9k_hw_resettxqueue(ah, i);
ath9k_hw_init_interrupt_masks(ah, ah->opmode);
@@ -1426,8 +1492,7 @@
ar9002_hw_enable_wep_aggregation(ah);
}
- REG_WRITE(ah, AR_STA_ID1,
- REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM);
+ REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
ath9k_hw_set_dma(ah);
@@ -1480,7 +1545,9 @@
REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
}
#ifdef __BIG_ENDIAN
- else
+ else if (AR_SREV_9340(ah))
+ REG_RMW(ah, AR_CFG, AR_CFG_SWRB | AR_CFG_SWTB, 0);
+ else
REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
#endif
}
@@ -1491,6 +1558,8 @@
if (AR_SREV_9300_20_OR_LATER(ah))
ar9003_hw_bb_watchdog_config(ah);
+ ath9k_hw_apply_gpio_override(ah);
+
return 0;
}
EXPORT_SYMBOL(ath9k_hw_reset);
@@ -1670,21 +1739,15 @@
case NL80211_IFTYPE_MESH_POINT:
REG_SET_BIT(ah, AR_TXCFG,
AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY);
- REG_WRITE(ah, AR_NEXT_NDP_TIMER,
- TU_TO_USEC(next_beacon +
- (ah->atim_window ? ah->
- atim_window : 1)));
+ REG_WRITE(ah, AR_NEXT_NDP_TIMER, next_beacon +
+ TU_TO_USEC(ah->atim_window ? ah->atim_window : 1));
flags |= AR_NDP_TIMER_EN;
case NL80211_IFTYPE_AP:
- REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
- REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT,
- TU_TO_USEC(next_beacon -
- ah->config.
- dma_beacon_response_time));
- REG_WRITE(ah, AR_NEXT_SWBA,
- TU_TO_USEC(next_beacon -
- ah->config.
- sw_beacon_response_time));
+ REG_WRITE(ah, AR_NEXT_TBTT_TIMER, next_beacon);
+ REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, next_beacon -
+ TU_TO_USEC(ah->config.dma_beacon_response_time));
+ REG_WRITE(ah, AR_NEXT_SWBA, next_beacon -
+ TU_TO_USEC(ah->config.sw_beacon_response_time));
flags |=
AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
break;
@@ -1696,18 +1759,13 @@
break;
}
- REG_WRITE(ah, AR_BEACON_PERIOD, TU_TO_USEC(beacon_period));
- REG_WRITE(ah, AR_DMA_BEACON_PERIOD, TU_TO_USEC(beacon_period));
- REG_WRITE(ah, AR_SWBA_PERIOD, TU_TO_USEC(beacon_period));
- REG_WRITE(ah, AR_NDP_PERIOD, TU_TO_USEC(beacon_period));
+ REG_WRITE(ah, AR_BEACON_PERIOD, beacon_period);
+ REG_WRITE(ah, AR_DMA_BEACON_PERIOD, beacon_period);
+ REG_WRITE(ah, AR_SWBA_PERIOD, beacon_period);
+ REG_WRITE(ah, AR_NDP_PERIOD, beacon_period);
REGWRITE_BUFFER_FLUSH(ah);
- beacon_period &= ~ATH9K_BEACON_ENA;
- if (beacon_period & ATH9K_BEACON_RESET_TSF) {
- ath9k_hw_reset_tsf(ah);
- }
-
REG_SET_BIT(ah, AR_TIMER_MODE, flags);
}
EXPORT_SYMBOL(ath9k_hw_beaconinit);
@@ -1795,7 +1853,7 @@
struct ath_common *common = ath9k_hw_common(ah);
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
- u16 capField = 0, eeval;
+ u16 eeval;
u8 ant_div_ctl1, tx_chainmask, rx_chainmask;
eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_0);
@@ -1806,8 +1864,6 @@
eeval |= AR9285_RDEXT_DEFAULT;
regulatory->current_rd_ext = eeval;
- capField = ah->eep_ops->get_eeprom(ah, EEP_OP_CAP);
-
if (ah->opmode != NL80211_IFTYPE_AP &&
ah->hw_version.subvendorid == AR_SUBVENDOR_ID_NEW_A) {
if (regulatory->current_rd == 0x64 ||
@@ -1842,6 +1898,8 @@
!(AR_SREV_9271(ah)))
/* CB71: GPIO 0 is pulled down to indicate 3 rx chains */
pCap->rx_chainmask = ath9k_hw_gpio_get(ah, 0) ? 0x5 : 0x7;
+ else if (AR_SREV_9100(ah))
+ pCap->rx_chainmask = 0x7;
else
/* Use rx_chainmask from EEPROM. */
pCap->rx_chainmask = ah->eep_ops->get_eeprom(ah, EEP_RX_MASK);
@@ -1852,36 +1910,13 @@
if (AR_SREV_9300_20_OR_LATER(ah))
ah->misc_mode |= AR_PCU_ALWAYS_PERFORM_KEYSEARCH;
- pCap->low_2ghz_chan = 2312;
- pCap->high_2ghz_chan = 2732;
-
- pCap->low_5ghz_chan = 4920;
- pCap->high_5ghz_chan = 6100;
-
common->crypt_caps |= ATH_CRYPT_CAP_CIPHER_AESCCM;
- if (ah->config.ht_enable)
+ if (ah->hw_version.devid != AR2427_DEVID_PCIE)
pCap->hw_caps |= ATH9K_HW_CAP_HT;
else
pCap->hw_caps &= ~ATH9K_HW_CAP_HT;
- if (capField & AR_EEPROM_EEPCAP_MAXQCU)
- pCap->total_queues =
- MS(capField, AR_EEPROM_EEPCAP_MAXQCU);
- else
- pCap->total_queues = ATH9K_NUM_TX_QUEUES;
-
- if (capField & AR_EEPROM_EEPCAP_KC_ENTRIES)
- pCap->keycache_size =
- 1 << MS(capField, AR_EEPROM_EEPCAP_KC_ENTRIES);
- else
- pCap->keycache_size = AR_KEYTABLE_SIZE;
-
- if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
- pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD >> 1;
- else
- pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
-
if (AR_SREV_9271(ah))
pCap->num_gpio_pins = AR9271_NUM_GPIO;
else if (AR_DEVID_7010(ah))
@@ -1900,8 +1935,6 @@
pCap->rts_aggr_limit = (8 * 1024);
}
- pCap->hw_caps |= ATH9K_HW_CAP_ENHANCEDPM;
-
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
ah->rfsilent = ah->eep_ops->get_eeprom(ah, EEP_RF_SILENT);
if (ah->rfsilent & EEP_RFSILENT_ENABLED) {
@@ -1923,32 +1956,23 @@
else
pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
- if (regulatory->current_rd_ext & (1 << REG_EXT_JAPAN_MIDBAND)) {
- pCap->reg_cap =
- AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
- AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
- AR_EEPROM_EEREGCAP_EN_KK_U2 |
- AR_EEPROM_EEREGCAP_EN_KK_MIDBAND;
- } else {
- pCap->reg_cap =
- AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
- AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
- }
-
- /* Advertise midband for AR5416 with FCC midband set in eeprom */
- if (regulatory->current_rd_ext & (1 << REG_EXT_FCC_MIDBAND) &&
- AR_SREV_5416(ah))
- pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
-
- if (AR_SREV_9280_20_OR_LATER(ah) && common->btcoex_enabled) {
- btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO;
- btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
-
- if (AR_SREV_9285(ah)) {
+ if (common->btcoex_enabled) {
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
- btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO;
- } else {
- btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE;
+ btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
+ btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;
+ btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO_9300;
+ } else if (AR_SREV_9280_20_OR_LATER(ah)) {
+ btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9280;
+ btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9280;
+
+ if (AR_SREV_9285(ah)) {
+ btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
+ btcoex_hw->btpriority_gpio =
+ ATH_BTPRIORITY_GPIO_9285;
+ } else {
+ btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE;
+ }
}
} else {
btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
@@ -1998,6 +2022,22 @@
}
+ if (AR_SREV_9485(ah)) {
+ ant_div_ctl1 = ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
+ /*
+ * enable the diversity-combining algorithm only when
+ * both enable_lna_div and enable_fast_div are set
+ * Table for Diversity
+ * ant_div_alt_lnaconf bit 0-1
+ * ant_div_main_lnaconf bit 2-3
+ * ant_div_alt_gaintb bit 4
+ * ant_div_main_gaintb bit 5
+ * enable_ant_div_lnadiv bit 6
+ * enable_ant_fast_div bit 7
+ */
+ if ((ant_div_ctl1 >> 0x6) == 0x3)
+ pCap->hw_caps |= ATH9K_HW_CAP_ANT_DIV_COMB;
+ }
if (AR_SREV_9485_10(ah)) {
pCap->pcie_lcr_extsync_en = true;
@@ -2186,11 +2226,9 @@
REG_WRITE(ah, AR_PHY_ERR, phybits);
if (phybits)
- REG_WRITE(ah, AR_RXCFG,
- REG_READ(ah, AR_RXCFG) | AR_RXCFG_ZLFDMA);
+ REG_SET_BIT(ah, AR_RXCFG, AR_RXCFG_ZLFDMA);
else
- REG_WRITE(ah, AR_RXCFG,
- REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_ZLFDMA);
+ REG_CLR_BIT(ah, AR_RXCFG, AR_RXCFG_ZLFDMA);
REGWRITE_BUFFER_FLUSH(ah);
}
@@ -2366,10 +2404,11 @@
return timer_table->gen_timer_index[b];
}
-static u32 ath9k_hw_gettsf32(struct ath_hw *ah)
+u32 ath9k_hw_gettsf32(struct ath_hw *ah)
{
return REG_READ(ah, AR_TSF_L32);
}
+EXPORT_SYMBOL(ath9k_hw_gettsf32);
struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
void (*trigger)(void *),
@@ -2402,11 +2441,11 @@
void ath9k_hw_gen_timer_start(struct ath_hw *ah,
struct ath_gen_timer *timer,
- u32 timer_next,
+ u32 trig_timeout,
u32 timer_period)
{
struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
- u32 tsf;
+ u32 tsf, timer_next;
BUG_ON(!timer_period);
@@ -2414,18 +2453,13 @@
tsf = ath9k_hw_gettsf32(ah);
+ timer_next = tsf + trig_timeout;
+
ath_dbg(ath9k_hw_common(ah), ATH_DBG_HWTIMER,
"current tsf %x period %x timer_next %x\n",
tsf, timer_period, timer_next);
/*
- * Pull timer_next forward if the current TSF already passed it
- * because of software latency
- */
- if (timer_next < tsf)
- timer_next = tsf + timer_period;
-
- /*
* Program generic timer registers
*/
REG_WRITE(ah, gen_tmr_configuration[timer->index].next_addr,
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 6650fd4..7af2773 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -43,6 +43,7 @@
#define AR9287_DEVID_PCI 0x002d
#define AR9287_DEVID_PCIE 0x002e
#define AR9300_DEVID_PCIE 0x0030
+#define AR9300_DEVID_AR9340 0x0031
#define AR9300_DEVID_AR9485_PCIE 0x0032
#define AR5416_AR9100_DEVID 0x000b
@@ -55,6 +56,9 @@
#define AT9285_COEX3WIRE_SA_SUBSYSID 0x30aa
#define AT9285_COEX3WIRE_DA_SUBSYSID 0x30ab
+#define AR9300_NUM_BT_WEIGHTS 4
+#define AR9300_NUM_WLAN_WEIGHTS 4
+
#define ATH_AMPDU_LIMIT_MAX (64 * 1024 - 1)
#define ATH_DEFAULT_NOISE_FLOOR -95
@@ -65,53 +69,49 @@
/* Register read/write primitives */
#define REG_WRITE(_ah, _reg, _val) \
- ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))
+ (_ah)->reg_ops.write((_ah), (_val), (_reg))
#define REG_READ(_ah, _reg) \
- ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
+ (_ah)->reg_ops.read((_ah), (_reg))
#define REG_READ_MULTI(_ah, _addr, _val, _cnt) \
- ath9k_hw_common(_ah)->ops->multi_read((_ah), (_addr), (_val), (_cnt))
+ (_ah)->reg_ops.multi_read((_ah), (_addr), (_val), (_cnt))
+
+#define REG_RMW(_ah, _reg, _set, _clr) \
+ (_ah)->reg_ops.rmw((_ah), (_reg), (_set), (_clr))
#define ENABLE_REGWRITE_BUFFER(_ah) \
do { \
- if (ath9k_hw_common(_ah)->ops->enable_write_buffer) \
- ath9k_hw_common(_ah)->ops->enable_write_buffer((_ah)); \
+ if ((_ah)->reg_ops.enable_write_buffer) \
+ (_ah)->reg_ops.enable_write_buffer((_ah)); \
} while (0)
#define REGWRITE_BUFFER_FLUSH(_ah) \
do { \
- if (ath9k_hw_common(_ah)->ops->write_flush) \
- ath9k_hw_common(_ah)->ops->write_flush((_ah)); \
+ if ((_ah)->reg_ops.write_flush) \
+ (_ah)->reg_ops.write_flush((_ah)); \
} while (0)
#define SM(_v, _f) (((_v) << _f##_S) & _f)
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
-#define REG_RMW(_a, _r, _set, _clr) \
- REG_WRITE(_a, _r, (REG_READ(_a, _r) & ~(_clr)) | (_set))
#define REG_RMW_FIELD(_a, _r, _f, _v) \
- REG_WRITE(_a, _r, \
- (REG_READ(_a, _r) & ~_f) | (((_v) << _f##_S) & _f))
+ REG_RMW(_a, _r, (((_v) << _f##_S) & _f), (_f))
#define REG_READ_FIELD(_a, _r, _f) \
(((REG_READ(_a, _r) & _f) >> _f##_S))
#define REG_SET_BIT(_a, _r, _f) \
- REG_WRITE(_a, _r, REG_READ(_a, _r) | (_f))
+ REG_RMW(_a, _r, (_f), 0)
#define REG_CLR_BIT(_a, _r, _f) \
- REG_WRITE(_a, _r, REG_READ(_a, _r) & ~(_f))
+ REG_RMW(_a, _r, 0, (_f))
-#define DO_DELAY(x) do { \
- if ((++(x) % 64) == 0) \
- udelay(1); \
+#define DO_DELAY(x) do { \
+ if (((++(x) % 64) == 0) && \
+ (ath9k_hw_common(ah)->bus_ops->ath_bus_type \
+ != ATH_USB)) \
+ udelay(1); \
} while (0)
-#define REG_WRITE_ARRAY(iniarray, column, regWr) do { \
- int r; \
- for (r = 0; r < ((iniarray)->ia_rows); r++) { \
- REG_WRITE(ah, INI_RA((iniarray), (r), 0), \
- INI_RA((iniarray), r, (column))); \
- DO_DELAY(regWr); \
- } \
- } while (0)
+#define REG_WRITE_ARRAY(iniarray, column, regWr) \
+ ath9k_hw_write_array(ah, iniarray, column, &(regWr))
#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0
#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
@@ -125,7 +125,7 @@
#define AR_GPIO_BIT(_gpio) (1 << (_gpio))
#define BASE_ACTIVATE_DELAY 100
-#define RTC_PLL_SETTLE_DELAY 100
+#define RTC_PLL_SETTLE_DELAY (AR_SREV_9340(ah) ? 1000 : 100)
#define COEF_SCALE_S 24
#define HT40_CHANNEL_CENTER_SHIFT 10
@@ -178,7 +178,6 @@
ATH9K_HW_CAP_HT = BIT(0),
ATH9K_HW_CAP_RFSILENT = BIT(1),
ATH9K_HW_CAP_CST = BIT(2),
- ATH9K_HW_CAP_ENHANCEDPM = BIT(3),
ATH9K_HW_CAP_AUTOSLEEP = BIT(4),
ATH9K_HW_CAP_4KB_SPLITTRANS = BIT(5),
ATH9K_HW_CAP_EDMA = BIT(6),
@@ -195,17 +194,11 @@
struct ath9k_hw_capabilities {
u32 hw_caps; /* ATH9K_HW_CAP_* from ath9k_hw_caps */
- u16 total_queues;
- u16 keycache_size;
- u16 low_5ghz_chan, high_5ghz_chan;
- u16 low_2ghz_chan, high_2ghz_chan;
u16 rts_aggr_limit;
u8 tx_chainmask;
u8 rx_chainmask;
u8 max_txchains;
u8 max_rxchains;
- u16 tx_triglevel_max;
- u16 reg_cap;
u8 num_gpio_pins;
u8 rx_hp_qdepth;
u8 rx_lp_qdepth;
@@ -227,7 +220,6 @@
u8 pcie_clock_req;
u32 pcie_waen;
u8 analog_shiftreg;
- u8 ht_enable;
u8 paprd_disable;
u32 ofdm_trig_low;
u32 ofdm_trig_high;
@@ -412,8 +404,6 @@
u32 bs_nextdtim;
u32 bs_intval;
#define ATH9K_BEACON_PERIOD 0x0000ffff
-#define ATH9K_BEACON_ENA 0x00800000
-#define ATH9K_BEACON_RESET_TSF 0x01000000
#define ATH9K_TSFOOR_THRESHOLD 0x00004240 /* 16k us */
u32 bs_dtimperiod;
u16 bs_cfpperiod;
@@ -489,6 +479,10 @@
u8 main_lna_conf;
u8 alt_lna_conf;
u8 fast_div_bias;
+ u8 main_gaintb;
+ u8 alt_gaintb;
+ int lna1_lna2_delta;
+ u8 div_group;
};
/**
@@ -638,10 +632,12 @@
u32 numDelims);
void (*set11n_aggr_last)(struct ath_hw *ah, void *ds);
void (*clr11n_aggr)(struct ath_hw *ah, void *ds);
- void (*set11n_burstduration)(struct ath_hw *ah, void *ds,
- u32 burstDuration);
- void (*set11n_virtualmorefrag)(struct ath_hw *ah, void *ds,
- u32 vmf);
+ void (*set_clrdmask)(struct ath_hw *ah, void *ds, bool val);
+ void (*antdiv_comb_conf_get)(struct ath_hw *ah,
+ struct ath_hw_antcomb_conf *antconf);
+ void (*antdiv_comb_conf_set)(struct ath_hw *ah,
+ struct ath_hw_antcomb_conf *antconf);
+
};
struct ath_nf_limits {
@@ -655,6 +651,8 @@
#define AH_UNPLUGGED 0x2 /* The card has been physically removed. */
struct ath_hw {
+ struct ath_ops reg_ops;
+
struct ieee80211_hw *hw;
struct ath_common common;
struct ath9k_hw_version hw_version;
@@ -784,6 +782,8 @@
/* Bluetooth coexistance */
struct ath_btcoex_hw btcoex_hw;
+ u32 bt_coex_bt_weight[AR9300_NUM_BT_WEIGHTS];
+ u32 bt_coex_wlan_weight[AR9300_NUM_WLAN_WEIGHTS];
u32 intr_txqs;
u8 txchainmask;
@@ -794,7 +794,9 @@
u32 originalGain[22];
int initPDADC;
int PDADCdelta;
- u8 led_pin;
+ int led_pin;
+ u32 gpio_mask;
+ u32 gpio_val;
struct ar5416IniArray iniModes;
struct ar5416IniArray iniCommon;
@@ -810,6 +812,7 @@
struct ar5416IniArray iniPcieSerdes;
struct ar5416IniArray iniPcieSerdesLowPower;
struct ar5416IniArray iniModesAdditional;
+ struct ar5416IniArray iniModesAdditional_40M;
struct ar5416IniArray iniModesRxGain;
struct ar5416IniArray iniModesTxGain;
struct ar5416IniArray iniModes_9271_1_0_only;
@@ -856,6 +859,16 @@
/* Enterprise mode cap */
u32 ent_mode;
+
+ bool is_clk_25mhz;
+};
+
+struct ath_bus_ops {
+ enum ath_bus_type ath_bus_type;
+ void (*read_cachesize)(struct ath_common *common, int *csz);
+ bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
+ void (*bt_coex_prep)(struct ath_common *common);
+ void (*extn_synch_en)(struct ath_common *common);
};
static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
@@ -900,15 +913,12 @@
void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
u32 ath9k_hw_getdefantenna(struct ath_hw *ah);
void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
-void ath9k_hw_antdiv_comb_conf_get(struct ath_hw *ah,
- struct ath_hw_antcomb_conf *antconf);
-void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
- struct ath_hw_antcomb_conf *antconf);
/* General Operation */
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
+void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
+ int column, unsigned int *writecnt);
u32 ath9k_hw_reverse_bits(u32 val, u32 n);
-bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high);
u16 ath9k_hw_computetxtime(struct ath_hw *ah,
u8 phy, int kbps,
u32 frameLen, u16 rateix, bool shortPreamble);
@@ -924,12 +934,13 @@
void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
void ath9k_hw_setbssidmask(struct ath_hw *ah);
void ath9k_hw_write_associd(struct ath_hw *ah);
+u32 ath9k_hw_gettsf32(struct ath_hw *ah);
u64 ath9k_hw_gettsf64(struct ath_hw *ah);
void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64);
void ath9k_hw_reset_tsf(struct ath_hw *ah);
void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
void ath9k_hw_init_global_settings(struct ath_hw *ah);
-unsigned long ar9003_get_pll_sqsum_dvc(struct ath_hw *ah);
+u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah);
void ath9k_hw_set11nmac2040(struct ath_hw *ah);
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 79aec983..b172d15 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -15,6 +15,7 @@
*/
#include <linux/slab.h>
+#include <linux/ath9k_platform.h>
#include "ath9k.h"
@@ -195,10 +196,27 @@
return val;
}
-static const struct ath_ops ath9k_common_ops = {
- .read = ath9k_ioread32,
- .write = ath9k_iowrite32,
-};
+static unsigned int ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
+{
+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_softc *sc = (struct ath_softc *) common->priv;
+ unsigned long uninitialized_var(flags);
+ u32 val;
+
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON)
+ spin_lock_irqsave(&sc->sc_serial_rw, flags);
+
+ val = ioread32(sc->mem + reg_offset);
+ val &= ~clr;
+ val |= set;
+ iowrite32(val, sc->mem + reg_offset);
+
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON)
+ spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+
+ return val;
+}
/**************************/
/* Initialization */
@@ -389,13 +407,7 @@
int i = 0;
/* Get the hardware key cache size. */
- common->keymax = sc->sc_ah->caps.keycache_size;
- if (common->keymax > ATH_KEYMAX) {
- ath_dbg(common, ATH_DBG_ANY,
- "Warning, using only %u entries in %u key cache\n",
- ATH_KEYMAX, common->keymax);
- common->keymax = ATH_KEYMAX;
- }
+ common->keymax = AR_KEYTABLE_SIZE;
/*
* Reset the key cache since some parts do not
@@ -537,6 +549,7 @@
static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
const struct ath_bus_ops *bus_ops)
{
+ struct ath9k_platform_data *pdata = sc->dev->platform_data;
struct ath_hw *ah = NULL;
struct ath_common *common;
int ret = 0, i;
@@ -549,13 +562,23 @@
ah->hw = sc->hw;
ah->hw_version.devid = devid;
ah->hw_version.subsysid = subsysid;
+ ah->reg_ops.read = ath9k_ioread32;
+ ah->reg_ops.write = ath9k_iowrite32;
+ ah->reg_ops.rmw = ath9k_reg_rmw;
sc->sc_ah = ah;
- if (!sc->dev->platform_data)
+ if (!pdata) {
ah->ah_flags |= AH_USE_EEPROM;
+ sc->sc_ah->led_pin = -1;
+ } else {
+ sc->sc_ah->gpio_mask = pdata->gpio_mask;
+ sc->sc_ah->gpio_val = pdata->gpio_val;
+ sc->sc_ah->led_pin = pdata->led_pin;
+ ah->is_clk_25mhz = pdata->is_clk_25mhz;
+ }
common = ath9k_hw_common(ah);
- common->ops = &ath9k_common_ops;
+ common->ops = &ah->reg_ops;
common->bus_ops = bus_ops;
common->ah = ah;
common->hw = sc->hw;
@@ -587,6 +610,9 @@
if (ret)
goto err_hw;
+ if (pdata && pdata->macaddr)
+ memcpy(common->macaddr, pdata->macaddr, ETH_ALEN);
+
ret = ath9k_init_queues(sc);
if (ret)
goto err_queues;
@@ -679,6 +705,8 @@
if (AR_SREV_5416(sc->sc_ah))
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
hw->queues = 4;
hw->max_rates = 4;
hw->channel_change_time = 5000;
@@ -773,6 +801,7 @@
INIT_WORK(&sc->hw_check_work, ath_hw_check);
INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
+ INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
ath_init_leds(sc);
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index edc1cbb..bd6d2b9 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -209,15 +209,8 @@
{
u32 cw;
struct ath_common *common = ath9k_hw_common(ah);
- struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath9k_tx_queue_info *qi;
- if (q >= pCap->total_queues) {
- ath_dbg(common, ATH_DBG_QUEUE,
- "Set TXQ properties, invalid queue: %u\n", q);
- return false;
- }
-
qi = &ah->txq[q];
if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
ath_dbg(common, ATH_DBG_QUEUE,
@@ -280,15 +273,8 @@
struct ath9k_tx_queue_info *qinfo)
{
struct ath_common *common = ath9k_hw_common(ah);
- struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath9k_tx_queue_info *qi;
- if (q >= pCap->total_queues) {
- ath_dbg(common, ATH_DBG_QUEUE,
- "Get TXQ properties, invalid queue: %u\n", q);
- return false;
- }
-
qi = &ah->txq[q];
if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
ath_dbg(common, ATH_DBG_QUEUE,
@@ -320,28 +306,27 @@
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_tx_queue_info *qi;
- struct ath9k_hw_capabilities *pCap = &ah->caps;
int q;
switch (type) {
case ATH9K_TX_QUEUE_BEACON:
- q = pCap->total_queues - 1;
+ q = ATH9K_NUM_TX_QUEUES - 1;
break;
case ATH9K_TX_QUEUE_CAB:
- q = pCap->total_queues - 2;
+ q = ATH9K_NUM_TX_QUEUES - 2;
break;
case ATH9K_TX_QUEUE_PSPOLL:
q = 1;
break;
case ATH9K_TX_QUEUE_UAPSD:
- q = pCap->total_queues - 3;
+ q = ATH9K_NUM_TX_QUEUES - 3;
break;
case ATH9K_TX_QUEUE_DATA:
- for (q = 0; q < pCap->total_queues; q++)
+ for (q = 0; q < ATH9K_NUM_TX_QUEUES; q++)
if (ah->txq[q].tqi_type ==
ATH9K_TX_QUEUE_INACTIVE)
break;
- if (q == pCap->total_queues) {
+ if (q == ATH9K_NUM_TX_QUEUES) {
ath_err(common, "No available TX queue\n");
return -1;
}
@@ -382,15 +367,9 @@
bool ath9k_hw_releasetxqueue(struct ath_hw *ah, u32 q)
{
- struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_tx_queue_info *qi;
- if (q >= pCap->total_queues) {
- ath_dbg(common, ATH_DBG_QUEUE,
- "Release TXQ, invalid queue: %u\n", q);
- return false;
- }
qi = &ah->txq[q];
if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
ath_dbg(common, ATH_DBG_QUEUE,
@@ -414,18 +393,11 @@
bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
{
- struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_channel *chan = ah->curchan;
struct ath9k_tx_queue_info *qi;
u32 cwMin, chanCwMin, value;
- if (q >= pCap->total_queues) {
- ath_dbg(common, ATH_DBG_QUEUE,
- "Reset TXQ, invalid queue: %u\n", q);
- return false;
- }
-
qi = &ah->txq[q];
if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
ath_dbg(common, ATH_DBG_QUEUE,
@@ -458,17 +430,21 @@
SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH));
REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
- REG_WRITE(ah, AR_DMISC(q),
- AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2);
+
+ if (AR_SREV_9340(ah))
+ REG_WRITE(ah, AR_DMISC(q),
+ AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1);
+ else
+ REG_WRITE(ah, AR_DMISC(q),
+ AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x2);
if (qi->tqi_cbrPeriod) {
REG_WRITE(ah, AR_QCBRCFG(q),
SM(qi->tqi_cbrPeriod, AR_Q_CBRCFG_INTERVAL) |
SM(qi->tqi_cbrOverflowLimit, AR_Q_CBRCFG_OVF_THRESH));
- REG_WRITE(ah, AR_QMISC(q),
- REG_READ(ah, AR_QMISC(q)) | AR_Q_MISC_FSP_CBR |
- (qi->tqi_cbrOverflowLimit ?
- AR_Q_MISC_CBR_EXP_CNTR_LIMIT_EN : 0));
+ REG_SET_BIT(ah, AR_QMISC(q), AR_Q_MISC_FSP_CBR |
+ (qi->tqi_cbrOverflowLimit ?
+ AR_Q_MISC_CBR_EXP_CNTR_LIMIT_EN : 0));
}
if (qi->tqi_readyTime && (qi->tqi_type != ATH9K_TX_QUEUE_CAB)) {
REG_WRITE(ah, AR_QRDYTIMECFG(q),
@@ -481,40 +457,31 @@
(qi->tqi_burstTime ? AR_D_CHNTIME_EN : 0));
if (qi->tqi_burstTime
- && (qi->tqi_qflags & TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)) {
- REG_WRITE(ah, AR_QMISC(q),
- REG_READ(ah, AR_QMISC(q)) |
- AR_Q_MISC_RDYTIME_EXP_POLICY);
+ && (qi->tqi_qflags & TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE))
+ REG_SET_BIT(ah, AR_QMISC(q), AR_Q_MISC_RDYTIME_EXP_POLICY);
- }
-
- if (qi->tqi_qflags & TXQ_FLAG_BACKOFF_DISABLE) {
- REG_WRITE(ah, AR_DMISC(q),
- REG_READ(ah, AR_DMISC(q)) |
- AR_D_MISC_POST_FR_BKOFF_DIS);
- }
+ if (qi->tqi_qflags & TXQ_FLAG_BACKOFF_DISABLE)
+ REG_SET_BIT(ah, AR_DMISC(q), AR_D_MISC_POST_FR_BKOFF_DIS);
REGWRITE_BUFFER_FLUSH(ah);
- if (qi->tqi_qflags & TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) {
- REG_WRITE(ah, AR_DMISC(q),
- REG_READ(ah, AR_DMISC(q)) |
- AR_D_MISC_FRAG_BKOFF_EN);
- }
+ if (qi->tqi_qflags & TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+ REG_SET_BIT(ah, AR_DMISC(q), AR_D_MISC_FRAG_BKOFF_EN);
+
switch (qi->tqi_type) {
case ATH9K_TX_QUEUE_BEACON:
ENABLE_REGWRITE_BUFFER(ah);
- REG_WRITE(ah, AR_QMISC(q), REG_READ(ah, AR_QMISC(q))
- | AR_Q_MISC_FSP_DBA_GATED
- | AR_Q_MISC_BEACON_USE
- | AR_Q_MISC_CBR_INCR_DIS1);
+ REG_SET_BIT(ah, AR_QMISC(q),
+ AR_Q_MISC_FSP_DBA_GATED
+ | AR_Q_MISC_BEACON_USE
+ | AR_Q_MISC_CBR_INCR_DIS1);
- REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
- | (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
+ REG_SET_BIT(ah, AR_DMISC(q),
+ (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
AR_D_MISC_ARB_LOCKOUT_CNTRL_S)
- | AR_D_MISC_BEACON_USE
- | AR_D_MISC_POST_FR_BKOFF_DIS);
+ | AR_D_MISC_BEACON_USE
+ | AR_D_MISC_POST_FR_BKOFF_DIS);
REGWRITE_BUFFER_FLUSH(ah);
@@ -533,41 +500,38 @@
case ATH9K_TX_QUEUE_CAB:
ENABLE_REGWRITE_BUFFER(ah);
- REG_WRITE(ah, AR_QMISC(q), REG_READ(ah, AR_QMISC(q))
- | AR_Q_MISC_FSP_DBA_GATED
- | AR_Q_MISC_CBR_INCR_DIS1
- | AR_Q_MISC_CBR_INCR_DIS0);
+ REG_SET_BIT(ah, AR_QMISC(q),
+ AR_Q_MISC_FSP_DBA_GATED
+ | AR_Q_MISC_CBR_INCR_DIS1
+ | AR_Q_MISC_CBR_INCR_DIS0);
value = (qi->tqi_readyTime -
(ah->config.sw_beacon_response_time -
ah->config.dma_beacon_response_time) -
ah->config.additional_swba_backoff) * 1024;
REG_WRITE(ah, AR_QRDYTIMECFG(q),
value | AR_Q_RDYTIMECFG_EN);
- REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q))
- | (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
+ REG_SET_BIT(ah, AR_DMISC(q),
+ (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL <<
AR_D_MISC_ARB_LOCKOUT_CNTRL_S));
REGWRITE_BUFFER_FLUSH(ah);
break;
case ATH9K_TX_QUEUE_PSPOLL:
- REG_WRITE(ah, AR_QMISC(q),
- REG_READ(ah, AR_QMISC(q)) | AR_Q_MISC_CBR_INCR_DIS1);
+ REG_SET_BIT(ah, AR_QMISC(q), AR_Q_MISC_CBR_INCR_DIS1);
break;
case ATH9K_TX_QUEUE_UAPSD:
- REG_WRITE(ah, AR_DMISC(q), REG_READ(ah, AR_DMISC(q)) |
- AR_D_MISC_POST_FR_BKOFF_DIS);
+ REG_SET_BIT(ah, AR_DMISC(q), AR_D_MISC_POST_FR_BKOFF_DIS);
break;
default:
break;
}
if (qi->tqi_intFlags & ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS) {
- REG_WRITE(ah, AR_DMISC(q),
- REG_READ(ah, AR_DMISC(q)) |
- SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
- AR_D_MISC_ARB_LOCKOUT_CNTRL) |
- AR_D_MISC_POST_FR_BKOFF_DIS);
+ REG_SET_BIT(ah, AR_DMISC(q),
+ SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
+ AR_D_MISC_ARB_LOCKOUT_CNTRL) |
+ AR_D_MISC_POST_FR_BKOFF_DIS);
}
if (AR_SREV_9300_20_OR_LATER(ah))
@@ -754,7 +718,6 @@
bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
{
#define AH_RX_STOP_DMA_TIMEOUT 10000 /* usec */
-#define AH_RX_TIME_QUANTUM 100 /* usec */
struct ath_common *common = ath9k_hw_common(ah);
u32 mac_status, last_mac_status = 0;
int i;
@@ -797,7 +760,6 @@
return true;
}
-#undef AH_RX_TIME_QUANTUM
#undef AH_RX_STOP_DMA_TIMEOUT
}
EXPORT_SYMBOL(ath9k_hw_stopdmarecv);
@@ -855,10 +817,14 @@
void ath9k_hw_enable_interrupts(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
+ u32 sync_default = AR_INTR_SYNC_DEFAULT;
if (!(ah->imask & ATH9K_INT_GLOBAL))
return;
+ if (AR_SREV_9340(ah))
+ sync_default &= ~AR_INTR_SYNC_HOST1_FATAL;
+
ath_dbg(common, ATH_DBG_INTERRUPT, "enable IER\n");
REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
if (!AR_SREV_9100(ah)) {
@@ -867,10 +833,8 @@
REG_WRITE(ah, AR_INTR_ASYNC_MASK, AR_INTR_MAC_IRQ);
- REG_WRITE(ah, AR_INTR_SYNC_ENABLE,
- AR_INTR_SYNC_DEFAULT);
- REG_WRITE(ah, AR_INTR_SYNC_MASK,
- AR_INTR_SYNC_DEFAULT);
+ REG_WRITE(ah, AR_INTR_SYNC_ENABLE, sync_default);
+ REG_WRITE(ah, AR_INTR_SYNC_MASK, sync_default);
}
ath_dbg(common, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
@@ -926,6 +890,9 @@
mask |= AR_IMR_GENTMR;
}
+ if (ints & ATH9K_INT_GENTIMER)
+ mask |= AR_IMR_GENTMR;
+
if (ints & (ATH9K_INT_BMISC)) {
mask |= AR_IMR_BCNMISC;
if (ints & ATH9K_INT_TIM)
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index c2a5938..b60c130 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -239,7 +239,6 @@
void *ds_vdata;
} __packed __aligned(4);
-#define ATH9K_TXDESC_CLRDMASK 0x0001
#define ATH9K_TXDESC_NOACK 0x0002
#define ATH9K_TXDESC_RTSENA 0x0004
#define ATH9K_TXDESC_CTSENA 0x0008
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 17d04ff..17ebdf1 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -299,7 +299,7 @@
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
if (sc->sc_flags & SC_OP_BEACONS)
- ath_beacon_config(sc, NULL);
+ ath_set_beacon(sc);
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
ath_start_ani(common);
@@ -624,6 +624,43 @@
ath9k_ps_restore(sc);
}
+static void ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum)
+{
+ static int count;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ if (pll_sqsum >= 0x40000) {
+ count++;
+ if (count == 3) {
+ /* Rx is hung for more than 500ms. Reset it */
+ ath_dbg(common, ATH_DBG_RESET,
+ "Possible RX hang, resetting");
+ ath_reset(sc, true);
+ count = 0;
+ }
+ } else
+ count = 0;
+}
+
+void ath_hw_pll_work(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc,
+ hw_pll_work.work);
+ u32 pll_sqsum;
+
+ if (AR_SREV_9485(sc->sc_ah)) {
+
+ ath9k_ps_wakeup(sc);
+ pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah);
+ ath9k_ps_restore(sc);
+
+ ath_hw_pll_rx_hang_check(sc, pll_sqsum);
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/5);
+ }
+}
+
+
void ath9k_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
@@ -652,6 +689,17 @@
!ath9k_hw_check_alive(ah))
ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+ if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
+ /*
+ * TSF sync does not look correct; remain awake to sync with
+ * the next Beacon.
+ */
+ ath_dbg(common, ATH_DBG_PS,
+ "TSFOOR - Sync with next Beacon\n");
+ sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC |
+ PS_TSFOOR_SYNC;
+ }
+
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN);
@@ -674,16 +722,6 @@
ath_tx_tasklet(sc);
}
- if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
- /*
- * TSF sync does not look correct; remain awake to sync with
- * the next Beacon.
- */
- ath_dbg(common, ATH_DBG_PS,
- "TSFOOR - Sync with next Beacon\n");
- sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
- }
-
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
if (status & ATH9K_INT_GENTIMER)
ath_gen_timer_isr(sc->sc_ah);
@@ -828,48 +866,6 @@
#undef SCHED_INTR
}
-static void ath9k_bss_assoc_info(struct ath_softc *sc,
- struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
-
- if (bss_conf->assoc) {
- ath_dbg(common, ATH_DBG_CONFIG,
- "Bss Info ASSOC %d, bssid: %pM\n",
- bss_conf->aid, common->curbssid);
-
- /* New association, store aid */
- common->curaid = bss_conf->aid;
- ath9k_hw_write_associd(ah);
-
- /*
- * Request a re-configuration of Beacon related timers
- * on the receipt of the first Beacon frame (i.e.,
- * after time sync with the AP).
- */
- sc->ps_flags |= PS_BEACON_SYNC;
-
- /* Configure the beacon */
- ath_beacon_config(sc, vif);
-
- /* Reset rssi stats */
- sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
- sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
-
- sc->sc_flags |= SC_OP_ANI_RUN;
- ath_start_ani(common);
- } else {
- ath_dbg(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
- common->curaid = 0;
- /* Stop ANI */
- sc->sc_flags &= ~SC_OP_ANI_RUN;
- del_timer_sync(&common->ani.timer);
- }
-}
-
void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
@@ -899,7 +895,7 @@
goto out;
}
if (sc->sc_flags & SC_OP_BEACONS)
- ath_beacon_config(sc, NULL); /* restart beacons */
+ ath_set_beacon(sc); /* restart beacons */
/* Re-Enable interrupts */
ath9k_hw_set_interrupts(ah, ah->imask);
@@ -1006,7 +1002,7 @@
sc->config.txpowlimit, &sc->curtxpow);
if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
- ath_beacon_config(sc, NULL); /* restart beacons */
+ ath_set_beacon(sc); /* restart beacons */
ath9k_hw_set_interrupts(ah, ah->imask);
@@ -1389,7 +1385,9 @@
ath9k_hw_set_tsfadjust(ah, 0);
sc->sc_flags &= ~SC_OP_TSF_RESET;
- if (iter_data.nwds + iter_data.nmeshes)
+ if (iter_data.nmeshes)
+ ah->opmode = NL80211_IFTYPE_MESH_POINT;
+ else if (iter_data.nwds)
ah->opmode = NL80211_IFTYPE_AP;
else if (iter_data.nadhocs)
ah->opmode = NL80211_IFTYPE_ADHOC;
@@ -1413,6 +1411,7 @@
/* Set up ANI */
if ((iter_data.naps + iter_data.nadhocs) > 0) {
+ sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
} else {
@@ -1452,7 +1451,6 @@
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- struct ath_vif *avp = (void *)vif->drv_priv;
int ret = 0;
ath9k_ps_wakeup(sc);
@@ -1482,8 +1480,9 @@
}
}
- if ((vif->type == NL80211_IFTYPE_ADHOC) &&
- sc->nvifs > 0) {
+ if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
+ ((vif->type == NL80211_IFTYPE_ADHOC) &&
+ sc->nvifs > 0)) {
ath_err(common, "Cannot create ADHOC interface when other"
" interfaces already exist.\n");
ret = -EINVAL;
@@ -1493,10 +1492,6 @@
ath_dbg(common, ATH_DBG_CONFIG,
"Attach a VIF of type: %d\n", vif->type);
- /* Set the VIF opmode */
- avp->av_opmode = vif->type;
- avp->av_bslot = -1;
-
sc->nvifs++;
ath9k_do_vif_add_setup(hw, vif);
@@ -1782,23 +1777,68 @@
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_node *an = (struct ath_node *) sta->drv_priv;
+ struct ieee80211_key_conf ps_key = { };
ath_node_attach(sc, sta);
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_AP_VLAN)
+ return 0;
+
+ an->ps_key = ath_key_config(common, vif, sta, &ps_key);
+
return 0;
}
+static void ath9k_del_ps_key(struct ath_softc *sc,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_node *an = (struct ath_node *) sta->drv_priv;
+ struct ieee80211_key_conf ps_key = { .hw_key_idx = an->ps_key };
+
+ if (!an->ps_key)
+ return;
+
+ ath_key_delete(common, &ps_key);
+}
+
static int ath9k_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
+ ath9k_del_ps_key(sc, vif, sta);
ath_node_detach(sc, sta);
return 0;
}
+static void ath9k_sta_notify(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum sta_notify_cmd cmd,
+ struct ieee80211_sta *sta)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_node *an = (struct ath_node *) sta->drv_priv;
+
+ switch (cmd) {
+ case STA_NOTIFY_SLEEP:
+ an->sleeping = true;
+ if (ath_tx_aggr_sleep(sc, an))
+ ieee80211_sta_set_tim(sta);
+ break;
+ case STA_NOTIFY_AWAKE:
+ an->sleeping = false;
+ ath_tx_aggr_wakeup(sc, an);
+ break;
+ }
+}
+
static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
@@ -1855,12 +1895,29 @@
if (ath9k_modparam_nohwcrypt)
return -ENOSPC;
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
+ (key->cipher == WLAN_CIPHER_SUITE_TKIP ||
+ key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+ /*
+ * For now, disable hw crypto for the RSN IBSS group keys. This
+ * could be optimized in the future to use a modified key cache
+ * design to support per-STA RX GTK, but until that gets
+ * implemented, use of software crypto for group addressed
+ * frames is a acceptable to allow RSN IBSS to be used.
+ */
+ return -EOPNOTSUPP;
+ }
+
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
switch (cmd) {
case SET_KEY:
+ if (sta)
+ ath9k_del_ps_key(sc, vif, sta);
+
ret = ath_key_config(common, vif, sta, key);
if (ret >= 0) {
key->hw_key_idx = ret;
@@ -1886,6 +1943,92 @@
return ret;
}
+static void ath9k_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath_softc *sc = data;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+ struct ath_vif *avp = (void *)vif->drv_priv;
+
+ switch (sc->sc_ah->opmode) {
+ case NL80211_IFTYPE_ADHOC:
+ /* There can be only one vif available */
+ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+ common->curaid = bss_conf->aid;
+ ath9k_hw_write_associd(sc->sc_ah);
+ /* configure beacon */
+ if (bss_conf->enable_beacon)
+ ath_beacon_config(sc, vif);
+ break;
+ case NL80211_IFTYPE_STATION:
+ /*
+ * Skip iteration if primary station vif's bss info
+ * was not changed
+ */
+ if (sc->sc_flags & SC_OP_PRIM_STA_VIF)
+ break;
+
+ if (bss_conf->assoc) {
+ sc->sc_flags |= SC_OP_PRIM_STA_VIF;
+ avp->primary_sta_vif = true;
+ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+ common->curaid = bss_conf->aid;
+ ath9k_hw_write_associd(sc->sc_ah);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Bss Info ASSOC %d, bssid: %pM\n",
+ bss_conf->aid, common->curbssid);
+ ath_beacon_config(sc, vif);
+ /*
+ * Request a re-configuration of Beacon related timers
+ * on the receipt of the first Beacon frame (i.e.,
+ * after time sync with the AP).
+ */
+ sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
+ /* Reset rssi stats */
+ sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
+ sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
+
+ sc->sc_flags |= SC_OP_ANI_RUN;
+ ath_start_ani(common);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void ath9k_config_bss(struct ath_softc *sc, struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+ struct ath_vif *avp = (void *)vif->drv_priv;
+
+ /* Reconfigure bss info */
+ if (avp->primary_sta_vif && !bss_conf->assoc) {
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Bss Info DISASSOC %d, bssid %pM\n",
+ common->curaid, common->curbssid);
+ sc->sc_flags &= ~(SC_OP_PRIM_STA_VIF | SC_OP_BEACONS);
+ avp->primary_sta_vif = false;
+ memset(common->curbssid, 0, ETH_ALEN);
+ common->curaid = 0;
+ }
+
+ ieee80211_iterate_active_interfaces_atomic(
+ sc->hw, ath9k_bss_iter, sc);
+
+ /*
+ * None of station vifs are associated.
+ * Clear bssid & aid
+ */
+ if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
+ !(sc->sc_flags & SC_OP_PRIM_STA_VIF)) {
+ ath9k_hw_write_associd(sc->sc_ah);
+ /* Stop ANI */
+ sc->sc_flags &= ~SC_OP_ANI_RUN;
+ del_timer_sync(&common->ani.timer);
+ }
+}
static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -1893,7 +2036,6 @@
u32 changed)
{
struct ath_softc *sc = hw->priv;
- struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
@@ -1904,20 +2046,10 @@
mutex_lock(&sc->mutex);
if (changed & BSS_CHANGED_BSSID) {
- /* Set BSSID */
- memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
- memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
- common->curaid = 0;
- ath9k_hw_write_associd(ah);
-
- /* Set aggregation protection mode parameters */
- sc->config.ath_aggr_prot = 0;
+ ath9k_config_bss(sc, vif);
ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
common->curbssid, common->curaid);
-
- /* need to reconfigure the beacon */
- sc->sc_flags &= ~SC_OP_BEACONS ;
}
/* Enable transmission of beacons (AP, IBSS, MESH) */
@@ -1958,7 +2090,6 @@
}
if (changed & BSS_CHANGED_BEACON_INT) {
- cur_conf->beacon_interval = bss_conf->beacon_int;
/*
* In case of AP mode, the HW TSF has to be reset
* when the beacon interval changes.
@@ -1970,9 +2101,8 @@
if (!error)
ath_beacon_config(sc, vif);
ath9k_set_beaconing_status(sc, true);
- } else {
+ } else
ath_beacon_config(sc, vif);
- }
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -1994,12 +2124,6 @@
sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
}
- if (changed & BSS_CHANGED_ASSOC) {
- ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
- bss_conf->assoc);
- ath9k_bss_assoc_info(sc, hw, vif, bss_conf);
- }
-
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
}
@@ -2141,19 +2265,26 @@
static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
{
struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
int timeout = 200; /* ms */
int i, j;
+ bool drain_txq;
- ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
-
cancel_delayed_work_sync(&sc->tx_complete_work);
+ if (sc->sc_flags & SC_OP_INVALID) {
+ ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
+ mutex_unlock(&sc->mutex);
+ return;
+ }
+
if (drop)
timeout = 1;
for (j = 0; j < timeout; j++) {
- int npend = 0;
+ bool npend = false;
if (j)
usleep_range(1000, 2000);
@@ -2162,22 +2293,43 @@
if (!ATH_TXQ_SETUP(sc, i))
continue;
- npend += ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
+ npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
+
+ if (npend)
+ break;
}
if (!npend)
goto out;
}
- if (!ath_drain_all_txq(sc, false))
+ ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+ drain_txq = ath_drain_all_txq(sc, false);
+ spin_unlock_bh(&sc->sc_pcu_lock);
+ if (!drain_txq)
ath_reset(sc, false);
-
+ ath9k_ps_restore(sc);
ieee80211_wake_queues(hw);
out:
ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0);
mutex_unlock(&sc->mutex);
- ath9k_ps_restore(sc);
+}
+
+static bool ath9k_tx_frames_pending(struct ieee80211_hw *hw)
+{
+ struct ath_softc *sc = hw->priv;
+ int i;
+
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+ if (!ATH_TXQ_SETUP(sc, i))
+ continue;
+
+ if (ath9k_has_pending_frames(sc, &sc->tx.txq[i]))
+ return true;
+ }
+ return false;
}
struct ieee80211_ops ath9k_ops = {
@@ -2191,6 +2343,7 @@
.configure_filter = ath9k_configure_filter,
.sta_add = ath9k_sta_add,
.sta_remove = ath9k_sta_remove,
+ .sta_notify = ath9k_sta_notify,
.conf_tx = ath9k_conf_tx,
.bss_info_changed = ath9k_bss_info_changed,
.set_key = ath9k_set_key,
@@ -2202,4 +2355,5 @@
.rfkill_poll = ath9k_rfkill_poll_state,
.set_coverage_class = ath9k_set_coverage_class,
.flush = ath9k_flush,
+ .tx_frames_pending = ath9k_tx_frames_pending,
};
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 5e3d749..9441bf8 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -19,7 +19,6 @@
#define CHANSEL_DIV 15
#define CHANSEL_2G(_freq) (((_freq) * 0x10000) / CHANSEL_DIV)
-#define CHANSEL_2G_9485(_freq) ((((_freq) * 0x10000) - 215) / CHANSEL_DIV)
#define CHANSEL_5G(_freq) (((_freq) * 0x8000) / CHANSEL_DIV)
#define AR_PHY_BASE 0x9800
@@ -38,26 +37,15 @@
#define AR_PHY_CLC_Q0 0x0000ffd0
#define AR_PHY_CLC_Q0_S 5
-#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) do { \
- int r; \
- for (r = 0; r < ((iniarray)->ia_rows); r++) { \
- REG_WRITE(ah, INI_RA((iniarray), r, 0), (regData)[r]); \
- DO_DELAY(regWr); \
- } \
- } while (0)
-
#define ANTSWAP_AB 0x0001
#define REDUCE_CHAIN_0 0x00000050
#define REDUCE_CHAIN_1 0x00000051
#define AR_PHY_CHIP_ID 0x9818
-#define RF_BANK_SETUP(_bank, _iniarray, _col) do { \
- int i; \
- for (i = 0; i < (_iniarray)->ia_rows; i++) \
- (_bank)[i] = INI_RA((_iniarray), i, _col);; \
- } while (0)
-
#define AR_PHY_TIMING11_SPUR_FREQ_SD 0x3FF00000
#define AR_PHY_TIMING11_SPUR_FREQ_SD_S 20
+#define AR_PHY_PLL_CONTROL 0x16180
+#define AR_PHY_PLL_MODE 0x16184
+
#endif
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 4c0d36a..4ccbf2d 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -854,14 +854,13 @@
ath_rc_rate_set_rtscts(sc, rate_table, tx_info);
}
-static bool ath_rc_update_per(struct ath_softc *sc,
+static void ath_rc_update_per(struct ath_softc *sc,
const struct ath_rate_table *rate_table,
struct ath_rate_priv *ath_rc_priv,
struct ieee80211_tx_info *tx_info,
int tx_rate, int xretries, int retries,
u32 now_msec)
{
- bool state_change = false;
int count, n_bad_frames;
u8 last_per;
static const u32 nretry_to_per_lookup[10] = {
@@ -992,8 +991,6 @@
}
}
-
- return state_change;
}
static void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
@@ -1017,7 +1014,6 @@
u32 now_msec = jiffies_to_msecs(jiffies);
int rate;
u8 last_per;
- bool state_change = false;
const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
int size = ath_rc_priv->rate_table_size;
@@ -1027,9 +1023,9 @@
last_per = ath_rc_priv->per[tx_rate];
/* Update PER first */
- state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv,
- tx_info, tx_rate, xretries,
- retries, now_msec);
+ ath_rc_update_per(sc, rate_table, ath_rc_priv,
+ tx_info, tx_rate, xretries,
+ retries, now_msec);
/*
* If this rate looks bad (high PER) then stop using it for
@@ -1092,8 +1088,7 @@
if (!(rate->flags & IEEE80211_TX_RC_MCS))
return rate->idx;
- while (rate->idx > mcs_rix_off[i] &&
- i < ARRAY_SIZE(mcs_rix_off)) {
+ while (i < ARRAY_SIZE(mcs_rix_off) && rate->idx > mcs_rix_off[i]) {
rix++; i++;
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index dcd19bc..4f52e04 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -28,6 +28,33 @@
(alt_rssi_avg > main_rssi_avg + mindelta)) && (pkt_count > 50);
}
+static inline bool ath_ant_div_comb_alt_check(u8 div_group, int alt_ratio,
+ int curr_main_set, int curr_alt_set,
+ int alt_rssi_avg, int main_rssi_avg)
+{
+ bool result = false;
+ switch (div_group) {
+ case 0:
+ if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)
+ result = true;
+ break;
+ case 1:
+ if ((((curr_main_set == ATH_ANT_DIV_COMB_LNA2) &&
+ (curr_alt_set == ATH_ANT_DIV_COMB_LNA1) &&
+ (alt_rssi_avg >= (main_rssi_avg - 5))) ||
+ ((curr_main_set == ATH_ANT_DIV_COMB_LNA1) &&
+ (curr_alt_set == ATH_ANT_DIV_COMB_LNA2) &&
+ (alt_rssi_avg >= (main_rssi_avg - 2)))) &&
+ (alt_rssi_avg >= 4))
+ result = true;
+ else
+ result = false;
+ break;
+ }
+
+ return result;
+}
+
static inline bool ath9k_check_auto_sleep(struct ath_softc *sc)
{
return sc->ps_enabled &&
@@ -75,7 +102,6 @@
*sc->rx.rxlink = bf->bf_daddr;
sc->rx.rxlink = &ds->ds_link;
- ath9k_hw_rxena(ah);
}
static void ath_setdefantenna(struct ath_softc *sc, u32 antenna)
@@ -426,9 +452,7 @@
else
rfilt |= ATH9K_RX_FILTER_BEACON;
- if ((AR_SREV_9280_20_OR_LATER(sc->sc_ah) ||
- AR_SREV_9285_12_OR_LATER(sc->sc_ah)) &&
- (sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
+ if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->rx.rxfilter & FIF_PSPOLL))
rfilt |= ATH9K_RX_FILTER_PSPOLL;
@@ -506,7 +530,7 @@
"confusing the DMA engine when we start RX up\n");
ATH_DBG_WARN_ON_ONCE(!stopped);
}
- return stopped || reset;
+ return stopped && !reset;
}
void ath_flushrecv(struct ath_softc *sc)
@@ -574,7 +598,8 @@
sc->ps_flags &= ~PS_BEACON_SYNC;
ath_dbg(common, ATH_DBG_PS,
"Reconfigure Beacon timers based on timestamp from the AP\n");
- ath_beacon_config(sc, NULL);
+ ath_set_beacon(sc);
+ sc->ps_flags &= ~PS_TSFOOR_SYNC;
}
if (ath_beacon_dtim_pending_cab(skb)) {
@@ -919,7 +944,8 @@
int last_rssi;
__le16 fc;
- if (ah->opmode != NL80211_IFTYPE_STATION)
+ if ((ah->opmode != NL80211_IFTYPE_STATION) &&
+ (ah->opmode != NL80211_IFTYPE_ADHOC))
return;
fc = hdr->frame_control;
@@ -1291,49 +1317,138 @@
}
}
-static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf)
+static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf,
+ struct ath_ant_comb *antcomb, int alt_ratio)
{
- /* Adjust the fast_div_bias based on main and alt lna conf */
- switch ((ant_conf->main_lna_conf << 4) | ant_conf->alt_lna_conf) {
- case (0x01): /* A-B LNA2 */
- ant_conf->fast_div_bias = 0x3b;
- break;
- case (0x02): /* A-B LNA1 */
- ant_conf->fast_div_bias = 0x3d;
- break;
- case (0x03): /* A-B A+B */
- ant_conf->fast_div_bias = 0x1;
- break;
- case (0x10): /* LNA2 A-B */
- ant_conf->fast_div_bias = 0x7;
- break;
- case (0x12): /* LNA2 LNA1 */
- ant_conf->fast_div_bias = 0x2;
- break;
- case (0x13): /* LNA2 A+B */
- ant_conf->fast_div_bias = 0x7;
- break;
- case (0x20): /* LNA1 A-B */
- ant_conf->fast_div_bias = 0x6;
- break;
- case (0x21): /* LNA1 LNA2 */
- ant_conf->fast_div_bias = 0x0;
- break;
- case (0x23): /* LNA1 A+B */
- ant_conf->fast_div_bias = 0x6;
- break;
- case (0x30): /* A+B A-B */
- ant_conf->fast_div_bias = 0x1;
- break;
- case (0x31): /* A+B LNA2 */
- ant_conf->fast_div_bias = 0x3b;
- break;
- case (0x32): /* A+B LNA1 */
- ant_conf->fast_div_bias = 0x3d;
- break;
- default:
- break;
+ if (ant_conf->div_group == 0) {
+ /* Adjust the fast_div_bias based on main and alt lna conf */
+ switch ((ant_conf->main_lna_conf << 4) |
+ ant_conf->alt_lna_conf) {
+ case (0x01): /* A-B LNA2 */
+ ant_conf->fast_div_bias = 0x3b;
+ break;
+ case (0x02): /* A-B LNA1 */
+ ant_conf->fast_div_bias = 0x3d;
+ break;
+ case (0x03): /* A-B A+B */
+ ant_conf->fast_div_bias = 0x1;
+ break;
+ case (0x10): /* LNA2 A-B */
+ ant_conf->fast_div_bias = 0x7;
+ break;
+ case (0x12): /* LNA2 LNA1 */
+ ant_conf->fast_div_bias = 0x2;
+ break;
+ case (0x13): /* LNA2 A+B */
+ ant_conf->fast_div_bias = 0x7;
+ break;
+ case (0x20): /* LNA1 A-B */
+ ant_conf->fast_div_bias = 0x6;
+ break;
+ case (0x21): /* LNA1 LNA2 */
+ ant_conf->fast_div_bias = 0x0;
+ break;
+ case (0x23): /* LNA1 A+B */
+ ant_conf->fast_div_bias = 0x6;
+ break;
+ case (0x30): /* A+B A-B */
+ ant_conf->fast_div_bias = 0x1;
+ break;
+ case (0x31): /* A+B LNA2 */
+ ant_conf->fast_div_bias = 0x3b;
+ break;
+ case (0x32): /* A+B LNA1 */
+ ant_conf->fast_div_bias = 0x3d;
+ break;
+ default:
+ break;
+ }
+ } else if (ant_conf->div_group == 2) {
+ /* Adjust the fast_div_bias based on main and alt_lna_conf */
+ switch ((ant_conf->main_lna_conf << 4) |
+ ant_conf->alt_lna_conf) {
+ case (0x01): /* A-B LNA2 */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x02): /* A-B LNA1 */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x03): /* A-B A+B */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x10): /* LNA2 A-B */
+ if (!(antcomb->scan) &&
+ (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+ ant_conf->fast_div_bias = 0x1;
+ else
+ ant_conf->fast_div_bias = 0x2;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x12): /* LNA2 LNA1 */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x13): /* LNA2 A+B */
+ if (!(antcomb->scan) &&
+ (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+ ant_conf->fast_div_bias = 0x1;
+ else
+ ant_conf->fast_div_bias = 0x2;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x20): /* LNA1 A-B */
+ if (!(antcomb->scan) &&
+ (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+ ant_conf->fast_div_bias = 0x1;
+ else
+ ant_conf->fast_div_bias = 0x2;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x21): /* LNA1 LNA2 */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x23): /* LNA1 A+B */
+ if (!(antcomb->scan) &&
+ (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO))
+ ant_conf->fast_div_bias = 0x1;
+ else
+ ant_conf->fast_div_bias = 0x2;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x30): /* A+B A-B */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x31): /* A+B LNA2 */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ case (0x32): /* A+B LNA1 */
+ ant_conf->fast_div_bias = 0x1;
+ ant_conf->main_gaintb = 0;
+ ant_conf->alt_gaintb = 0;
+ break;
+ default:
+ break;
+ }
+
}
+
}
/* Antenna diversity and combining */
@@ -1342,7 +1457,7 @@
struct ath_hw_antcomb_conf div_ant_conf;
struct ath_ant_comb *antcomb = &sc->ant_comb;
int alt_ratio = 0, alt_rssi_avg = 0, main_rssi_avg = 0, curr_alt_set;
- int curr_main_set, curr_bias;
+ int curr_main_set;
int main_rssi = rs->rs_rssi_ctl0;
int alt_rssi = rs->rs_rssi_ctl1;
int rx_ant_conf, main_ant_conf;
@@ -1353,8 +1468,8 @@
main_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_MAIN_SHIFT) &
ATH_ANT_RX_MASK;
- /* Record packet only when alt_rssi is positive */
- if (alt_rssi > 0) {
+ /* Record packet only when both main_rssi and alt_rssi is positive */
+ if (main_rssi > 0 && alt_rssi > 0) {
antcomb->total_pkt_count++;
antcomb->main_total_rssi += main_rssi;
antcomb->alt_total_rssi += alt_rssi;
@@ -1396,7 +1511,6 @@
ath9k_hw_antdiv_comb_conf_get(sc->sc_ah, &div_ant_conf);
curr_alt_set = div_ant_conf.alt_lna_conf;
curr_main_set = div_ant_conf.main_lna_conf;
- curr_bias = div_ant_conf.fast_div_bias;
antcomb->count++;
@@ -1415,7 +1529,9 @@
}
if (!antcomb->scan) {
- if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO) {
+ if (ath_ant_div_comb_alt_check(div_ant_conf.div_group,
+ alt_ratio, curr_main_set, curr_alt_set,
+ alt_rssi_avg, main_rssi_avg)) {
if (curr_alt_set == ATH_ANT_DIV_COMB_LNA2) {
/* Switch main and alt LNA */
div_ant_conf.main_lna_conf =
@@ -1444,7 +1560,7 @@
}
if ((alt_rssi_avg < (main_rssi_avg +
- ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA)))
+ div_ant_conf.lna1_lna2_delta)))
goto div_comb_done;
}
@@ -1558,8 +1674,7 @@
antcomb->quick_scan_cnt++;
div_comb_done:
- ath_ant_div_conf_fast_divbias(&div_ant_conf);
-
+ ath_ant_div_conf_fast_divbias(&div_ant_conf, antcomb, alt_ratio);
ath9k_hw_antdiv_comb_conf_set(sc->sc_ah, &div_ant_conf);
antcomb->scan_start_time = jiffies;
@@ -1746,7 +1861,7 @@
if ((sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA)) ||
- unlikely(ath9k_check_auto_sleep(sc)))
+ ath9k_check_auto_sleep(sc))
ath_rx_ps(sc, skb);
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
@@ -1767,6 +1882,7 @@
} else {
list_move_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_buf_link(sc, bf);
+ ath9k_hw_rxena(ah);
}
} while (1);
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 8fa8acf..456f3ec 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -693,7 +693,7 @@
#define AR_RC_APB 0x00000002
#define AR_RC_HOSTIF 0x00000100
-#define AR_WA 0x4004
+#define AR_WA (AR_SREV_9340(ah) ? 0x40c4 : 0x4004)
#define AR_WA_BIT6 (1 << 6)
#define AR_WA_BIT7 (1 << 7)
#define AR_WA_BIT23 (1 << 23)
@@ -712,7 +712,7 @@
#define AR_PM_STATE 0x4008
#define AR_PM_STATE_PME_D3COLD_VAUX 0x00100000
-#define AR_HOST_TIMEOUT 0x4018
+#define AR_HOST_TIMEOUT (AR_SREV_9340(ah) ? 0x4008 : 0x4018)
#define AR_HOST_TIMEOUT_APB_CNTR 0x0000FFFF
#define AR_HOST_TIMEOUT_APB_CNTR_S 0
#define AR_HOST_TIMEOUT_LCL_CNTR 0xFFFF0000
@@ -742,7 +742,8 @@
#define EEPROM_PROTECT_WP_1024_2047 0x8000
#define AR_SREV \
- ((AR_SREV_9100(ah)) ? 0x0600 : 0x4020)
+ ((AR_SREV_9100(ah)) ? 0x0600 : (AR_SREV_9340(ah) \
+ ? 0x400c : 0x4020))
#define AR_SREV_ID \
((AR_SREV_9100(ah)) ? 0x00000FFF : 0x000000FF)
@@ -790,6 +791,7 @@
#define AR_SREV_VERSION_9485 0x240
#define AR_SREV_REVISION_9485_10 0
#define AR_SREV_REVISION_9485_11 1
+#define AR_SREV_VERSION_9340 0x300
#define AR_SREV_5416(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) || \
@@ -858,9 +860,7 @@
#define AR_SREV_9300(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9300))
#define AR_SREV_9300_20_OR_LATER(_ah) \
- (((_ah)->hw_version.macVersion > AR_SREV_VERSION_9300) || \
- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9300) && \
- ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9300_20)))
+ ((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9300)
#define AR_SREV_9485(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485))
@@ -870,6 +870,11 @@
#define AR_SREV_9485_11(_ah) \
(AR_SREV_9485(_ah) && \
((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_11))
+#define AR_SREV_9485_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9485))
+
+#define AR_SREV_9340(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340))
#define AR_SREV_9285E_20(_ah) \
(AR_SREV_9285_12_OR_LATER(_ah) && \
@@ -912,11 +917,11 @@
#define AR_INTR_SPURIOUS 0xFFFFFFFF
-#define AR_INTR_SYNC_CAUSE_CLR 0x4028
+#define AR_INTR_SYNC_CAUSE (AR_SREV_9340(ah) ? 0x4010 : 0x4028)
+#define AR_INTR_SYNC_CAUSE_CLR (AR_SREV_9340(ah) ? 0x4010 : 0x4028)
-#define AR_INTR_SYNC_CAUSE 0x4028
-#define AR_INTR_SYNC_ENABLE 0x402c
+#define AR_INTR_SYNC_ENABLE (AR_SREV_9340(ah) ? 0x4014 : 0x402c)
#define AR_INTR_SYNC_ENABLE_GPIO 0xFFFC0000
#define AR_INTR_SYNC_ENABLE_GPIO_S 18
@@ -956,24 +961,24 @@
};
-#define AR_INTR_ASYNC_MASK 0x4030
+#define AR_INTR_ASYNC_MASK (AR_SREV_9340(ah) ? 0x4018 : 0x4030)
#define AR_INTR_ASYNC_MASK_GPIO 0xFFFC0000
#define AR_INTR_ASYNC_MASK_GPIO_S 18
-#define AR_INTR_SYNC_MASK 0x4034
+#define AR_INTR_SYNC_MASK (AR_SREV_9340(ah) ? 0x401c : 0x4034)
#define AR_INTR_SYNC_MASK_GPIO 0xFFFC0000
#define AR_INTR_SYNC_MASK_GPIO_S 18
-#define AR_INTR_ASYNC_CAUSE_CLR 0x4038
-#define AR_INTR_ASYNC_CAUSE 0x4038
+#define AR_INTR_ASYNC_CAUSE_CLR (AR_SREV_9340(ah) ? 0x4020 : 0x4038)
+#define AR_INTR_ASYNC_CAUSE (AR_SREV_9340(ah) ? 0x4020 : 0x4038)
-#define AR_INTR_ASYNC_ENABLE 0x403c
+#define AR_INTR_ASYNC_ENABLE (AR_SREV_9340(ah) ? 0x4024 : 0x403c)
#define AR_INTR_ASYNC_ENABLE_GPIO 0xFFFC0000
#define AR_INTR_ASYNC_ENABLE_GPIO_S 18
#define AR_PCIE_SERDES 0x4040
#define AR_PCIE_SERDES2 0x4044
-#define AR_PCIE_PM_CTRL 0x4014
+#define AR_PCIE_PM_CTRL (AR_SREV_9340(ah) ? 0x4004 : 0x4014)
#define AR_PCIE_PM_CTRL_ENA 0x00080000
#define AR_NUM_GPIO 14
@@ -984,7 +989,7 @@
#define AR9300_NUM_GPIO 17
#define AR7010_NUM_GPIO 16
-#define AR_GPIO_IN_OUT 0x4048
+#define AR_GPIO_IN_OUT (AR_SREV_9340(ah) ? 0x4028 : 0x4048)
#define AR_GPIO_IN_VAL 0x0FFFC000
#define AR_GPIO_IN_VAL_S 14
#define AR928X_GPIO_IN_VAL 0x000FFC00
@@ -998,11 +1003,12 @@
#define AR7010_GPIO_IN_VAL 0x0000FFFF
#define AR7010_GPIO_IN_VAL_S 0
-#define AR_GPIO_IN 0x404c
+#define AR_GPIO_IN (AR_SREV_9340(ah) ? 0x402c : 0x404c)
#define AR9300_GPIO_IN_VAL 0x0001FFFF
#define AR9300_GPIO_IN_VAL_S 0
-#define AR_GPIO_OE_OUT (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c)
+#define AR_GPIO_OE_OUT (AR_SREV_9340(ah) ? 0x4030 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c))
#define AR_GPIO_OE_OUT_DRV 0x3
#define AR_GPIO_OE_OUT_DRV_NO 0x0
#define AR_GPIO_OE_OUT_DRV_LOW 0x1
@@ -1024,11 +1030,13 @@
#define AR7010_GPIO_INT_MASK 0x52024
#define AR7010_GPIO_FUNCTION 0x52028
-#define AR_GPIO_INTR_POL (AR_SREV_9300_20_OR_LATER(ah) ? 0x4058 : 0x4050)
+#define AR_GPIO_INTR_POL (AR_SREV_9340(ah) ? 0x4038 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4058 : 0x4050))
#define AR_GPIO_INTR_POL_VAL 0x0001FFFF
#define AR_GPIO_INTR_POL_VAL_S 0
-#define AR_GPIO_INPUT_EN_VAL (AR_SREV_9300_20_OR_LATER(ah) ? 0x405c : 0x4054)
+#define AR_GPIO_INPUT_EN_VAL (AR_SREV_9340(ah) ? 0x403c : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x405c : 0x4054))
#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF 0x00000004
#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_S 2
#define AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF 0x00000008
@@ -1046,13 +1054,15 @@
#define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE 0x00010000
#define AR_GPIO_JTAG_DISABLE 0x00020000
-#define AR_GPIO_INPUT_MUX1 (AR_SREV_9300_20_OR_LATER(ah) ? 0x4060 : 0x4058)
+#define AR_GPIO_INPUT_MUX1 (AR_SREV_9340(ah) ? 0x4040 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4060 : 0x4058))
#define AR_GPIO_INPUT_MUX1_BT_ACTIVE 0x000f0000
#define AR_GPIO_INPUT_MUX1_BT_ACTIVE_S 16
#define AR_GPIO_INPUT_MUX1_BT_PRIORITY 0x00000f00
#define AR_GPIO_INPUT_MUX1_BT_PRIORITY_S 8
-#define AR_GPIO_INPUT_MUX2 (AR_SREV_9300_20_OR_LATER(ah) ? 0x4064 : 0x405c)
+#define AR_GPIO_INPUT_MUX2 (AR_SREV_9340(ah) ? 0x4044 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4064 : 0x405c))
#define AR_GPIO_INPUT_MUX2_CLK25 0x0000000f
#define AR_GPIO_INPUT_MUX2_CLK25_S 0
#define AR_GPIO_INPUT_MUX2_RFSILENT 0x000000f0
@@ -1060,13 +1070,18 @@
#define AR_GPIO_INPUT_MUX2_RTC_RESET 0x00000f00
#define AR_GPIO_INPUT_MUX2_RTC_RESET_S 8
-#define AR_GPIO_OUTPUT_MUX1 (AR_SREV_9300_20_OR_LATER(ah) ? 0x4068 : 0x4060)
-#define AR_GPIO_OUTPUT_MUX2 (AR_SREV_9300_20_OR_LATER(ah) ? 0x406c : 0x4064)
-#define AR_GPIO_OUTPUT_MUX3 (AR_SREV_9300_20_OR_LATER(ah) ? 0x4070 : 0x4068)
+#define AR_GPIO_OUTPUT_MUX1 (AR_SREV_9340(ah) ? 0x4048 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4068 : 0x4060))
+#define AR_GPIO_OUTPUT_MUX2 (AR_SREV_9340(ah) ? 0x404c : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x406c : 0x4064))
+#define AR_GPIO_OUTPUT_MUX3 (AR_SREV_9340(ah) ? 0x4050 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4070 : 0x4068))
-#define AR_INPUT_STATE (AR_SREV_9300_20_OR_LATER(ah) ? 0x4074 : 0x406c)
+#define AR_INPUT_STATE (AR_SREV_9340(ah) ? 0x4054 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4074 : 0x406c))
-#define AR_EEPROM_STATUS_DATA (AR_SREV_9300_20_OR_LATER(ah) ? 0x4084 : 0x407c)
+#define AR_EEPROM_STATUS_DATA (AR_SREV_9340(ah) ? 0x40c8 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4084 : 0x407c))
#define AR_EEPROM_STATUS_DATA_VAL 0x0000ffff
#define AR_EEPROM_STATUS_DATA_VAL_S 0
#define AR_EEPROM_STATUS_DATA_BUSY 0x00010000
@@ -1074,28 +1089,51 @@
#define AR_EEPROM_STATUS_DATA_PROT_ACCESS 0x00040000
#define AR_EEPROM_STATUS_DATA_ABSENT_ACCESS 0x00080000
-#define AR_OBS (AR_SREV_9300_20_OR_LATER(ah) ? 0x4088 : 0x4080)
+#define AR_OBS (AR_SREV_9340(ah) ? 0x405c : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x4088 : 0x4080))
#define AR_GPIO_PDPU (AR_SREV_9300_20_OR_LATER(ah) ? 0x4090 : 0x4088)
-#define AR_PCIE_MSI (AR_SREV_9300_20_OR_LATER(ah) ? 0x40a4 : 0x4094)
+#define AR_PCIE_MSI (AR_SREV_9340(ah) ? 0x40d8 : \
+ (AR_SREV_9300_20_OR_LATER(ah) ? 0x40a4 : 0x4094))
#define AR_PCIE_MSI_ENABLE 0x00000001
-#define AR_INTR_PRIO_SYNC_ENABLE 0x40c4
-#define AR_INTR_PRIO_ASYNC_MASK 0x40c8
-#define AR_INTR_PRIO_SYNC_MASK 0x40cc
-#define AR_INTR_PRIO_ASYNC_ENABLE 0x40d4
+#define AR_INTR_PRIO_SYNC_ENABLE (AR_SREV_9340(ah) ? 0x4088 : 0x40c4)
+#define AR_INTR_PRIO_ASYNC_MASK (AR_SREV_9340(ah) ? 0x408c : 0x40c8)
+#define AR_INTR_PRIO_SYNC_MASK (AR_SREV_9340(ah) ? 0x4090 : 0x40cc)
+#define AR_INTR_PRIO_ASYNC_ENABLE (AR_SREV_9340(ah) ? 0x4094 : 0x40d4)
#define AR_ENT_OTP 0x40d8
#define AR_ENT_OTP_CHAIN2_DISABLE 0x00020000
#define AR_ENT_OTP_MPSD 0x00800000
-#define AR_CH0_BB_DPLL2 0x16184
-#define AR_CH0_BB_DPLL3 0x16188
-#define AR_CH0_DDR_DPLL2 0x16244
-#define AR_CH0_DDR_DPLL3 0x16248
-#define AR_CH0_DPLL2_KD 0x03F80000
-#define AR_CH0_DPLL2_KD_S 19
+
+#define AR_CH0_BB_DPLL1 0x16180
+#define AR_CH0_BB_DPLL1_REFDIV 0xF8000000
+#define AR_CH0_BB_DPLL1_REFDIV_S 27
+#define AR_CH0_BB_DPLL1_NINI 0x07FC0000
+#define AR_CH0_BB_DPLL1_NINI_S 18
+#define AR_CH0_BB_DPLL1_NFRAC 0x0003FFFF
+#define AR_CH0_BB_DPLL1_NFRAC_S 0
+
+#define AR_CH0_BB_DPLL2 0x16184
+#define AR_CH0_BB_DPLL2_LOCAL_PLL 0x40000000
+#define AR_CH0_BB_DPLL2_LOCAL_PLL_S 30
#define AR_CH0_DPLL2_KI 0x3C000000
#define AR_CH0_DPLL2_KI_S 26
+#define AR_CH0_DPLL2_KD 0x03F80000
+#define AR_CH0_DPLL2_KD_S 19
+#define AR_CH0_BB_DPLL2_EN_NEGTRIG 0x00040000
+#define AR_CH0_BB_DPLL2_EN_NEGTRIG_S 18
+#define AR_CH0_BB_DPLL2_PLL_PWD 0x00010000
+#define AR_CH0_BB_DPLL2_PLL_PWD_S 16
+#define AR_CH0_BB_DPLL2_OUTDIV 0x0000E000
+#define AR_CH0_BB_DPLL2_OUTDIV_S 13
+
+#define AR_CH0_BB_DPLL3 0x16188
+#define AR_CH0_BB_DPLL3_PHASE_SHIFT 0x3F800000
+#define AR_CH0_BB_DPLL3_PHASE_SHIFT_S 23
+
+#define AR_CH0_DDR_DPLL2 0x16244
+#define AR_CH0_DDR_DPLL3 0x16248
#define AR_CH0_DPLL3_PHASE_SHIFT 0x3F800000
#define AR_CH0_DPLL3_PHASE_SHIFT_S 23
#define AR_PHY_CCA_NOM_VAL_2GHZ -118
@@ -1144,6 +1182,7 @@
#define AR_RTC_PLL_REFDIV_5 0x000000c0
#define AR_RTC_PLL_CLKSEL 0x00000300
#define AR_RTC_PLL_CLKSEL_S 8
+#define AR_RTC_PLL_BYPASS 0x00010000
#define PLL3 0x16188
#define PLL3_DO_MEAS_MASK 0x40000000
@@ -1190,7 +1229,8 @@
/* RTC_DERIVED_* - only for AR9100 */
-#define AR_RTC_DERIVED_CLK (AR_RTC_BASE + 0x0038)
+#define AR_RTC_DERIVED_CLK \
+ (AR_SREV_9100(ah) ? (AR_RTC_BASE + 0x0038) : 0x7038)
#define AR_RTC_DERIVED_CLK_PERIOD 0x0000fffe
#define AR_RTC_DERIVED_CLK_PERIOD_S 1
@@ -1396,6 +1436,7 @@
#define AR_STA_ID1_PCF 0x00100000
#define AR_STA_ID1_USE_DEFANT 0x00200000
#define AR_STA_ID1_DEFANT_UPDATE 0x00400000
+#define AR_STA_ID1_AR9100_BA_FIX 0x00400000
#define AR_STA_ID1_RTS_USE_DEF 0x00800000
#define AR_STA_ID1_ACKCTS_6MB 0x01000000
#define AR_STA_ID1_BASE_RATE_11B 0x02000000
@@ -1668,6 +1709,22 @@
#define AR_BTCOEX_WL_WGHT 0xffff0000
#define AR_BTCOEX_WL_WGHT_S 16
+#define AR_BT_COEX_WL_WEIGHTS0 0x8174
+#define AR_BT_COEX_WL_WEIGHTS1 0x81c4
+
+#define AR_BT_COEX_BT_WEIGHTS0 0x83ac
+#define AR_BT_COEX_BT_WEIGHTS1 0x83b0
+#define AR_BT_COEX_BT_WEIGHTS2 0x83b4
+#define AR_BT_COEX_BT_WEIGHTS3 0x83b8
+
+#define AR9300_BT_WGHT 0xcccc4444
+#define AR9300_STOMP_ALL_WLAN_WGHT0 0xfffffff0
+#define AR9300_STOMP_ALL_WLAN_WGHT1 0xfffffff0
+#define AR9300_STOMP_LOW_WLAN_WGHT0 0x88888880
+#define AR9300_STOMP_LOW_WLAN_WGHT1 0x88888880
+#define AR9300_STOMP_NONE_WLAN_WGHT0 0x00000000
+#define AR9300_STOMP_NONE_WLAN_WGHT1 0x00000000
+
#define AR_BT_COEX_MODE2 0x817c
#define AR_BT_BCN_MISS_THRESH 0x000000ff
#define AR_BT_BCN_MISS_THRESH_S 0
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index d3d2490..f9b1eb4 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -23,20 +23,18 @@
return "WMI_ECHO_CMDID";
case WMI_ACCESS_MEMORY_CMDID:
return "WMI_ACCESS_MEMORY_CMDID";
+ case WMI_GET_FW_VERSION:
+ return "WMI_GET_FW_VERSION";
case WMI_DISABLE_INTR_CMDID:
return "WMI_DISABLE_INTR_CMDID";
case WMI_ENABLE_INTR_CMDID:
return "WMI_ENABLE_INTR_CMDID";
- case WMI_RX_LINK_CMDID:
- return "WMI_RX_LINK_CMDID";
case WMI_ATH_INIT_CMDID:
return "WMI_ATH_INIT_CMDID";
case WMI_ABORT_TXQ_CMDID:
return "WMI_ABORT_TXQ_CMDID";
case WMI_STOP_TX_DMA_CMDID:
return "WMI_STOP_TX_DMA_CMDID";
- case WMI_STOP_DMA_RECV_CMDID:
- return "WMI_STOP_DMA_RECV_CMDID";
case WMI_ABORT_TX_DMA_CMDID:
return "WMI_ABORT_TX_DMA_CMDID";
case WMI_DRAIN_TXQ_CMDID:
@@ -51,8 +49,6 @@
return "WMI_FLUSH_RECV_CMDID";
case WMI_SET_MODE_CMDID:
return "WMI_SET_MODE_CMDID";
- case WMI_RESET_CMDID:
- return "WMI_RESET_CMDID";
case WMI_NODE_CREATE_CMDID:
return "WMI_NODE_CREATE_CMDID";
case WMI_NODE_REMOVE_CMDID:
@@ -61,8 +57,6 @@
return "WMI_VAP_REMOVE_CMDID";
case WMI_VAP_CREATE_CMDID:
return "WMI_VAP_CREATE_CMDID";
- case WMI_BEACON_UPDATE_CMDID:
- return "WMI_BEACON_UPDATE_CMDID";
case WMI_REG_READ_CMDID:
return "WMI_REG_READ_CMDID";
case WMI_REG_WRITE_CMDID:
@@ -71,22 +65,22 @@
return "WMI_RC_STATE_CHANGE_CMDID";
case WMI_RC_RATE_UPDATE_CMDID:
return "WMI_RC_RATE_UPDATE_CMDID";
- case WMI_DEBUG_INFO_CMDID:
- return "WMI_DEBUG_INFO_CMDID";
- case WMI_HOST_ATTACH:
- return "WMI_HOST_ATTACH";
case WMI_TARGET_IC_UPDATE_CMDID:
return "WMI_TARGET_IC_UPDATE_CMDID";
- case WMI_TGT_STATS_CMDID:
- return "WMI_TGT_STATS_CMDID";
case WMI_TX_AGGR_ENABLE_CMDID:
return "WMI_TX_AGGR_ENABLE_CMDID";
case WMI_TGT_DETACH_CMDID:
return "WMI_TGT_DETACH_CMDID";
- case WMI_TGT_TXQ_ENABLE_CMDID:
- return "WMI_TGT_TXQ_ENABLE_CMDID";
- case WMI_AGGR_LIMIT_CMD:
- return "WMI_AGGR_LIMIT_CMD";
+ case WMI_NODE_UPDATE_CMDID:
+ return "WMI_NODE_UPDATE_CMDID";
+ case WMI_INT_STATS_CMDID:
+ return "WMI_INT_STATS_CMDID";
+ case WMI_TX_STATS_CMDID:
+ return "WMI_TX_STATS_CMDID";
+ case WMI_RX_STATS_CMDID:
+ return "WMI_RX_STATS_CMDID";
+ case WMI_BITRATE_MASK_CMDID:
+ return "WMI_BITRATE_MASK_CMDID";
}
return "Bogus";
@@ -102,9 +96,15 @@
wmi->drv_priv = priv;
wmi->stopped = false;
+ skb_queue_head_init(&wmi->wmi_event_queue);
+ spin_lock_init(&wmi->wmi_lock);
+ spin_lock_init(&wmi->event_lock);
mutex_init(&wmi->op_mutex);
mutex_init(&wmi->multi_write_mutex);
init_completion(&wmi->cmd_wait);
+ INIT_LIST_HEAD(&wmi->pending_tx_events);
+ tasklet_init(&wmi->wmi_event_tasklet, ath9k_wmi_event_tasklet,
+ (unsigned long)wmi);
return wmi;
}
@@ -120,11 +120,65 @@
kfree(priv->wmi);
}
-void ath9k_swba_tasklet(unsigned long data)
+void ath9k_wmi_event_drain(struct ath9k_htc_priv *priv)
{
- struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *)data;
+ unsigned long flags;
- ath9k_htc_swba(priv, priv->wmi->beacon_pending);
+ tasklet_kill(&priv->wmi->wmi_event_tasklet);
+ spin_lock_irqsave(&priv->wmi->wmi_lock, flags);
+ __skb_queue_purge(&priv->wmi->wmi_event_queue);
+ spin_unlock_irqrestore(&priv->wmi->wmi_lock, flags);
+}
+
+void ath9k_wmi_event_tasklet(unsigned long data)
+{
+ struct wmi *wmi = (struct wmi *)data;
+ struct ath9k_htc_priv *priv = wmi->drv_priv;
+ struct wmi_cmd_hdr *hdr;
+ void *wmi_event;
+ struct wmi_event_swba *swba;
+ struct sk_buff *skb = NULL;
+ unsigned long flags;
+ u16 cmd_id;
+
+ do {
+ spin_lock_irqsave(&wmi->wmi_lock, flags);
+ skb = __skb_dequeue(&wmi->wmi_event_queue);
+ if (!skb) {
+ spin_unlock_irqrestore(&wmi->wmi_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&wmi->wmi_lock, flags);
+
+ hdr = (struct wmi_cmd_hdr *) skb->data;
+ cmd_id = be16_to_cpu(hdr->command_id);
+ wmi_event = skb_pull(skb, sizeof(struct wmi_cmd_hdr));
+
+ switch (cmd_id) {
+ case WMI_SWBA_EVENTID:
+ swba = (struct wmi_event_swba *) wmi_event;
+ ath9k_htc_swba(priv, swba);
+ break;
+ case WMI_FATAL_EVENTID:
+ ieee80211_queue_work(wmi->drv_priv->hw,
+ &wmi->drv_priv->fatal_work);
+ break;
+ case WMI_TXSTATUS_EVENTID:
+ spin_lock_bh(&priv->tx.tx_lock);
+ if (priv->tx.flags & ATH9K_HTC_OP_TX_DRAIN) {
+ spin_unlock_bh(&priv->tx.tx_lock);
+ break;
+ }
+ spin_unlock_bh(&priv->tx.tx_lock);
+
+ ath9k_htc_txstatus(priv, wmi_event);
+ break;
+ default:
+ break;
+ }
+
+ kfree_skb(skb);
+ } while (1);
}
void ath9k_fatal_work(struct work_struct *work)
@@ -153,10 +207,6 @@
struct wmi *wmi = (struct wmi *) priv;
struct wmi_cmd_hdr *hdr;
u16 cmd_id;
- void *wmi_event;
-#ifdef CONFIG_ATH9K_HTC_DEBUGFS
- __be32 txrate;
-#endif
if (unlikely(wmi->stopped))
goto free_skb;
@@ -165,26 +215,10 @@
cmd_id = be16_to_cpu(hdr->command_id);
if (cmd_id & 0x1000) {
- wmi_event = skb_pull(skb, sizeof(struct wmi_cmd_hdr));
- switch (cmd_id) {
- case WMI_SWBA_EVENTID:
- wmi->beacon_pending = *(u8 *)wmi_event;
- tasklet_schedule(&wmi->drv_priv->swba_tasklet);
- break;
- case WMI_FATAL_EVENTID:
- ieee80211_queue_work(wmi->drv_priv->hw,
- &wmi->drv_priv->fatal_work);
- break;
- case WMI_TXRATE_EVENTID:
-#ifdef CONFIG_ATH9K_HTC_DEBUGFS
- txrate = ((struct wmi_event_txrate *)wmi_event)->txrate;
- wmi->drv_priv->debug.txrate = be32_to_cpu(txrate);
-#endif
- break;
- default:
- break;
- }
- kfree_skb(skb);
+ spin_lock(&wmi->wmi_lock);
+ __skb_queue_tail(&wmi->wmi_event_queue, skb);
+ spin_unlock(&wmi->wmi_lock);
+ tasklet_schedule(&wmi->wmi_event_tasklet);
return;
}
@@ -243,7 +277,7 @@
hdr->command_id = cpu_to_be16(cmd);
hdr->seq_no = cpu_to_be16(++wmi->tx_seq_id);
- return htc_send(wmi->htc, skb, wmi->ctrl_epid, NULL);
+ return htc_send_epid(wmi->htc, skb, wmi->ctrl_epid);
}
int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index 4208427..6095eeb 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -17,7 +17,6 @@
#ifndef WMI_H
#define WMI_H
-
struct wmi_event_txrate {
__be32 txrate;
struct {
@@ -31,18 +30,65 @@
__be16 seq_no;
} __packed;
+struct wmi_fw_version {
+ __be16 major;
+ __be16 minor;
+
+} __packed;
+
+struct wmi_event_swba {
+ __be64 tsf;
+ u8 beacon_pending;
+};
+
+/*
+ * 64 - HTC header - WMI header - 1 / txstatus
+ * And some other hdr. space is also accounted for.
+ * 12 seems to be the magic number.
+ */
+#define HTC_MAX_TX_STATUS 12
+
+#define ATH9K_HTC_TXSTAT_ACK BIT(0)
+#define ATH9K_HTC_TXSTAT_FILT BIT(1)
+#define ATH9K_HTC_TXSTAT_RTC_CTS BIT(2)
+#define ATH9K_HTC_TXSTAT_MCS BIT(3)
+#define ATH9K_HTC_TXSTAT_CW40 BIT(4)
+#define ATH9K_HTC_TXSTAT_SGI BIT(5)
+
+/*
+ * Legacy rates are indicated as indices.
+ * HT rates are indicated as dot11 numbers.
+ * This allows us to resrict the rate field
+ * to 4 bits.
+ */
+#define ATH9K_HTC_TXSTAT_RATE 0x0f
+#define ATH9K_HTC_TXSTAT_RATE_S 0
+
+#define ATH9K_HTC_TXSTAT_EPID 0xf0
+#define ATH9K_HTC_TXSTAT_EPID_S 4
+
+struct __wmi_event_txstatus {
+ u8 cookie;
+ u8 ts_rate; /* Also holds EP ID */
+ u8 ts_flags;
+};
+
+struct wmi_event_txstatus {
+ u8 cnt;
+ struct __wmi_event_txstatus txstatus[HTC_MAX_TX_STATUS];
+} __packed;
+
enum wmi_cmd_id {
WMI_ECHO_CMDID = 0x0001,
WMI_ACCESS_MEMORY_CMDID,
/* Commands to Target */
+ WMI_GET_FW_VERSION,
WMI_DISABLE_INTR_CMDID,
WMI_ENABLE_INTR_CMDID,
- WMI_RX_LINK_CMDID,
WMI_ATH_INIT_CMDID,
WMI_ABORT_TXQ_CMDID,
WMI_STOP_TX_DMA_CMDID,
- WMI_STOP_DMA_RECV_CMDID,
WMI_ABORT_TX_DMA_CMDID,
WMI_DRAIN_TXQ_CMDID,
WMI_DRAIN_TXQ_ALL_CMDID,
@@ -50,24 +96,22 @@
WMI_STOP_RECV_CMDID,
WMI_FLUSH_RECV_CMDID,
WMI_SET_MODE_CMDID,
- WMI_RESET_CMDID,
WMI_NODE_CREATE_CMDID,
WMI_NODE_REMOVE_CMDID,
WMI_VAP_REMOVE_CMDID,
WMI_VAP_CREATE_CMDID,
- WMI_BEACON_UPDATE_CMDID,
WMI_REG_READ_CMDID,
WMI_REG_WRITE_CMDID,
WMI_RC_STATE_CHANGE_CMDID,
WMI_RC_RATE_UPDATE_CMDID,
- WMI_DEBUG_INFO_CMDID,
- WMI_HOST_ATTACH,
WMI_TARGET_IC_UPDATE_CMDID,
- WMI_TGT_STATS_CMDID,
WMI_TX_AGGR_ENABLE_CMDID,
WMI_TGT_DETACH_CMDID,
- WMI_TGT_TXQ_ENABLE_CMDID,
- WMI_AGGR_LIMIT_CMD = 0x0026,
+ WMI_NODE_UPDATE_CMDID,
+ WMI_INT_STATS_CMDID,
+ WMI_TX_STATS_CMDID,
+ WMI_RX_STATS_CMDID,
+ WMI_BITRATE_MASK_CMDID,
};
enum wmi_event_id {
@@ -76,9 +120,8 @@
WMI_FATAL_EVENTID,
WMI_TXTO_EVENTID,
WMI_BMISS_EVENTID,
- WMI_WLAN_TXCOMP_EVENTID,
WMI_DELBA_EVENTID,
- WMI_TXRATE_EVENTID,
+ WMI_TXSTATUS_EVENTID,
};
#define MAX_CMD_NUMBER 62
@@ -88,6 +131,12 @@
__be32 val;
};
+struct ath9k_htc_tx_event {
+ int count;
+ struct __wmi_event_txstatus txs;
+ struct list_head list;
+};
+
struct wmi {
struct ath9k_htc_priv *drv_priv;
struct htc_target *htc;
@@ -95,12 +144,16 @@
struct mutex op_mutex;
struct completion cmd_wait;
enum wmi_cmd_id last_cmd_id;
+ struct sk_buff_head wmi_event_queue;
+ struct tasklet_struct wmi_event_tasklet;
u16 tx_seq_id;
u8 *cmd_rsp_buf;
u32 cmd_rsp_len;
bool stopped;
- u8 beacon_pending;
+ struct list_head pending_tx_events;
+ spinlock_t event_lock;
+
spinlock_t wmi_lock;
atomic_t mwrite_cnt;
@@ -117,8 +170,9 @@
u8 *cmd_buf, u32 cmd_len,
u8 *rsp_buf, u32 rsp_len,
u32 timeout);
-void ath9k_swba_tasklet(unsigned long data);
+void ath9k_wmi_event_tasklet(unsigned long data);
void ath9k_fatal_work(struct work_struct *work);
+void ath9k_wmi_event_drain(struct ath9k_htc_priv *priv);
#define WMI_CMD(_wmi_cmd) \
do { \
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 88fa7fd..97dd1fa 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -357,6 +357,7 @@
struct ath_frame_info *fi;
int nframes;
u8 tidno;
+ bool clear_filter;
skb = bf->bf_mpdu;
hdr = (struct ieee80211_hdr *)skb->data;
@@ -441,22 +442,24 @@
/* transmit completion */
acked_cnt++;
} else {
- if (!(tid->state & AGGR_CLEANUP) && retry) {
- if (fi->retries < ATH_MAX_SW_RETRIES) {
- ath_tx_set_retry(sc, txq, bf->bf_mpdu);
- txpending = 1;
- } else {
- bf->bf_state.bf_type |= BUF_XRETRY;
- txfail = 1;
- sendbar = 1;
- txfail_cnt++;
- }
- } else {
+ if ((tid->state & AGGR_CLEANUP) || !retry) {
/*
* cleanup in progress, just fail
* the un-acked sub-frames
*/
txfail = 1;
+ } else if (fi->retries < ATH_MAX_SW_RETRIES) {
+ if (!(ts->ts_status & ATH9K_TXERR_FILT) ||
+ !an->sleeping)
+ ath_tx_set_retry(sc, txq, bf->bf_mpdu);
+
+ clear_filter = true;
+ txpending = 1;
+ } else {
+ bf->bf_state.bf_type |= BUF_XRETRY;
+ txfail = 1;
+ sendbar = 1;
+ txfail_cnt++;
}
}
@@ -496,6 +499,7 @@
!txfail, sendbar);
} else {
/* retry the un-acked ones */
+ ath9k_hw_set_clrdmask(sc->sc_ah, bf->bf_desc, false);
if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)) {
if (bf->bf_next == NULL && bf_last->bf_stale) {
struct ath_buf *tbf;
@@ -546,7 +550,12 @@
/* prepend un-acked frames to the beginning of the pending frame queue */
if (!list_empty(&bf_pending)) {
+ if (an->sleeping)
+ ieee80211_sta_set_tim(sta);
+
spin_lock_bh(&txq->axq_lock);
+ if (clear_filter)
+ tid->ac->clear_ps_filter = true;
list_splice(&bf_pending, &tid->buf_q);
ath_tx_queue_tid(txq, tid);
spin_unlock_bh(&txq->axq_lock);
@@ -816,6 +825,11 @@
bf = list_first_entry(&bf_q, struct ath_buf, list);
bf->bf_lastbf = list_entry(bf_q.prev, struct ath_buf, list);
+ if (tid->ac->clear_ps_filter) {
+ tid->ac->clear_ps_filter = false;
+ ath9k_hw_set_clrdmask(sc->sc_ah, bf->bf_desc, true);
+ }
+
/* if only one frame, send as non-aggregate */
if (bf == bf->bf_lastbf) {
fi = get_frame_info(bf->bf_mpdu);
@@ -896,6 +910,67 @@
ath_tx_flush_tid(sc, txtid);
}
+bool ath_tx_aggr_sleep(struct ath_softc *sc, struct ath_node *an)
+{
+ struct ath_atx_tid *tid;
+ struct ath_atx_ac *ac;
+ struct ath_txq *txq;
+ bool buffered = false;
+ int tidno;
+
+ for (tidno = 0, tid = &an->tid[tidno];
+ tidno < WME_NUM_TID; tidno++, tid++) {
+
+ if (!tid->sched)
+ continue;
+
+ ac = tid->ac;
+ txq = ac->txq;
+
+ spin_lock_bh(&txq->axq_lock);
+
+ if (!list_empty(&tid->buf_q))
+ buffered = true;
+
+ tid->sched = false;
+ list_del(&tid->list);
+
+ if (ac->sched) {
+ ac->sched = false;
+ list_del(&ac->list);
+ }
+
+ spin_unlock_bh(&txq->axq_lock);
+ }
+
+ return buffered;
+}
+
+void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an)
+{
+ struct ath_atx_tid *tid;
+ struct ath_atx_ac *ac;
+ struct ath_txq *txq;
+ int tidno;
+
+ for (tidno = 0, tid = &an->tid[tidno];
+ tidno < WME_NUM_TID; tidno++, tid++) {
+
+ ac = tid->ac;
+ txq = ac->txq;
+
+ spin_lock_bh(&txq->axq_lock);
+ ac->clear_ps_filter = true;
+
+ if (!list_empty(&tid->buf_q) && !tid->paused) {
+ ath_tx_queue_tid(txq, tid);
+ ath_txq_schedule(sc, txq);
+ }
+
+ spin_unlock_bh(&txq->axq_lock);
+ }
+}
+
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
{
struct ath_atx_tid *txtid;
@@ -1451,7 +1526,7 @@
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
struct ieee80211_hdr *hdr;
struct ath_frame_info *fi = get_frame_info(skb);
- struct ath_node *an;
+ struct ath_node *an = NULL;
struct ath_atx_tid *tid;
enum ath9k_key_type keytype;
u16 seqno = 0;
@@ -1459,11 +1534,13 @@
keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
+ if (sta)
+ an = (struct ath_node *) sta->drv_priv;
+
hdr = (struct ieee80211_hdr *)skb->data;
- if (sta && ieee80211_is_data_qos(hdr->frame_control) &&
+ if (an && ieee80211_is_data_qos(hdr->frame_control) &&
conf_is_ht(&hw->conf) && (sc->sc_flags & SC_OP_TXAGGR)) {
- an = (struct ath_node *) sta->drv_priv;
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
/*
@@ -1479,6 +1556,8 @@
memset(fi, 0, sizeof(*fi));
if (hw_key)
fi->keyix = hw_key->hw_key_idx;
+ else if (an && ieee80211_is_data(hdr->frame_control) && an->ps_key > 0)
+ fi->keyix = an->ps_key;
else
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
@@ -1491,7 +1570,6 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
int flags = 0;
- flags |= ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */
flags |= ATH9K_TXDESC_INTREQ;
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
@@ -1585,8 +1663,7 @@
rix = rates[i].idx;
series[i].Tries = rates[i].count;
- if ((sc->config.ath_aggr_prot && bf_isaggr(bf)) ||
- (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
+ if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
flags |= ATH9K_TXDESC_RTSENA;
} else if (rates[i].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
@@ -1655,8 +1732,6 @@
!is_pspoll, ctsrate,
0, series, 4, flags);
- if (sc->config.ath_aggr_prot && flags)
- ath9k_hw_set11n_burstduration(sc->sc_ah, bf->bf_desc, 8192);
}
static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw,
@@ -1754,6 +1829,9 @@
if (txctl->paprd)
bf->bf_state.bfs_paprd_timestamp = jiffies;
+ if (tx_info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
+ ath9k_hw_set_clrdmask(sc->sc_ah, bf->bf_desc, true);
+
ath_tx_send_normal(sc, txctl->txq, tid, &bf_head);
}
@@ -1767,6 +1845,7 @@
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sta *sta = info->control.sta;
+ struct ieee80211_vif *vif = info->control.vif;
struct ath_softc *sc = hw->priv;
struct ath_txq *txq = txctl->txq;
struct ath_buf *bf;
@@ -1804,6 +1883,11 @@
memmove(skb->data, skb->data + padsize, padpos);
}
+ if ((vif && vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_AP_VLAN) ||
+ !ieee80211_is_data(hdr->frame_control))
+ info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+
setup_frame_info(hw, skb, frmlen);
/*
@@ -1980,7 +2064,7 @@
if (ieee80211_is_data(hdr->frame_control) &&
(ts->ts_flags & (ATH9K_TX_DATA_UNDERRUN |
ATH9K_TX_DELIM_UNDERRUN)) &&
- ah->tx_trig_level >= sc->sc_ah->caps.tx_triglevel_max)
+ ah->tx_trig_level >= sc->sc_ah->config.max_txtrig_level)
tx_info->status.rates[tx_rateindex].count =
hw->max_rate_tries;
}
@@ -2099,28 +2183,6 @@
}
}
-static void ath_hw_pll_work(struct work_struct *work)
-{
- struct ath_softc *sc = container_of(work, struct ath_softc,
- hw_pll_work.work);
- static int count;
-
- if (AR_SREV_9485(sc->sc_ah)) {
- if (ar9003_get_pll_sqsum_dvc(sc->sc_ah) >= 0x40000) {
- count++;
-
- if (count == 3) {
- /* Rx is hung for more than 500ms. Reset it */
- ath_reset(sc, true);
- count = 0;
- }
- } else
- count = 0;
-
- ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/5);
- }
-}
-
static void ath_tx_complete_poll_work(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc,
@@ -2144,33 +2206,6 @@
} else {
txq->axq_tx_inprogress = true;
}
- } else {
- /* If the queue has pending buffers, then it
- * should be doing tx work (and have axq_depth).
- * Shouldn't get to this state I think..but
- * we do.
- */
- if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) &&
- (txq->pending_frames > 0 ||
- !list_empty(&txq->axq_acq) ||
- txq->stopped)) {
- ath_err(ath9k_hw_common(sc->sc_ah),
- "txq: %p axq_qnum: %u,"
- " mac80211_qnum: %i"
- " axq_link: %p"
- " pending frames: %i"
- " axq_acq empty: %i"
- " stopped: %i"
- " axq_depth: 0 Attempting to"
- " restart tx logic.\n",
- txq, txq->axq_qnum,
- txq->mac80211_qnum,
- txq->axq_link,
- txq->pending_frames,
- list_empty(&txq->axq_acq),
- txq->stopped);
- ath_txq_schedule(sc, txq);
- }
}
spin_unlock_bh(&txq->axq_lock);
}
@@ -2342,7 +2377,6 @@
}
INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work);
- INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
error = ath_tx_edma_init(sc);
diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 3d4ed58..bb57869 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -448,6 +448,8 @@
struct carl9170_sta_info {
bool ht_sta;
+ bool sleeping;
+ atomic_t pending_frames;
unsigned int ampdu_max_len;
struct carl9170_sta_tid *agg[CARL9170_NUM_TID];
struct carl9170_ba_stats stats[CARL9170_NUM_TID];
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index 89fe60a..7d5c65e 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -883,7 +883,7 @@
* then checking the error flags, later.
*/
- if (changed_flags & FIF_ALLMULTI && *new_flags & FIF_ALLMULTI)
+ if (*new_flags & FIF_ALLMULTI)
multicast = ~0ULL;
if (multicast != ar->cur_mc_hash)
@@ -1193,6 +1193,8 @@
struct carl9170_sta_info *sta_info = (void *) sta->drv_priv;
unsigned int i;
+ atomic_set(&sta_info->pending_frames, 0);
+
if (sta->ht_cap.ht_supported) {
if (sta->ht_cap.ampdu_density > 6) {
/*
@@ -1467,99 +1469,17 @@
enum sta_notify_cmd cmd,
struct ieee80211_sta *sta)
{
- struct ar9170 *ar = hw->priv;
struct carl9170_sta_info *sta_info = (void *) sta->drv_priv;
- struct sk_buff *skb, *tmp;
- struct sk_buff_head free;
- int i;
switch (cmd) {
case STA_NOTIFY_SLEEP:
- /*
- * Since the peer is no longer listening, we have to return
- * as many SKBs as possible back to the mac80211 stack.
- * It will deal with the retry procedure, once the peer
- * has become available again.
- *
- * NB: Ideally, the driver should return the all frames in
- * the correct, ascending order. However, I think that this
- * functionality should be implemented in the stack and not
- * here...
- */
-
- __skb_queue_head_init(&free);
-
- if (sta->ht_cap.ht_supported) {
- rcu_read_lock();
- for (i = 0; i < CARL9170_NUM_TID; i++) {
- struct carl9170_sta_tid *tid_info;
-
- tid_info = rcu_dereference(sta_info->agg[i]);
-
- if (!tid_info)
- continue;
-
- spin_lock_bh(&ar->tx_ampdu_list_lock);
- if (tid_info->state >
- CARL9170_TID_STATE_SUSPEND)
- tid_info->state =
- CARL9170_TID_STATE_SUSPEND;
- spin_unlock_bh(&ar->tx_ampdu_list_lock);
-
- spin_lock_bh(&tid_info->lock);
- while ((skb = __skb_dequeue(&tid_info->queue)))
- __skb_queue_tail(&free, skb);
- spin_unlock_bh(&tid_info->lock);
- }
- rcu_read_unlock();
- }
-
- for (i = 0; i < ar->hw->queues; i++) {
- spin_lock_bh(&ar->tx_pending[i].lock);
- skb_queue_walk_safe(&ar->tx_pending[i], skb, tmp) {
- struct _carl9170_tx_superframe *super;
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *info;
-
- super = (void *) skb->data;
- hdr = (void *) super->frame_data;
-
- if (compare_ether_addr(hdr->addr1, sta->addr))
- continue;
-
- __skb_unlink(skb, &ar->tx_pending[i]);
-
- info = IEEE80211_SKB_CB(skb);
- if (info->flags & IEEE80211_TX_CTL_AMPDU)
- atomic_dec(&ar->tx_ampdu_upload);
-
- carl9170_tx_status(ar, skb, false);
- }
- spin_unlock_bh(&ar->tx_pending[i].lock);
- }
-
- while ((skb = __skb_dequeue(&free)))
- carl9170_tx_status(ar, skb, false);
-
+ sta_info->sleeping = true;
+ if (atomic_read(&sta_info->pending_frames))
+ ieee80211_sta_block_awake(hw, sta, true);
break;
case STA_NOTIFY_AWAKE:
- if (!sta->ht_cap.ht_supported)
- return;
-
- rcu_read_lock();
- for (i = 0; i < CARL9170_NUM_TID; i++) {
- struct carl9170_sta_tid *tid_info;
-
- tid_info = rcu_dereference(sta_info->agg[i]);
-
- if (!tid_info)
- continue;
-
- if ((tid_info->state == CARL9170_TID_STATE_SUSPEND))
- tid_info->state = CARL9170_TID_STATE_IDLE;
- }
- rcu_read_unlock();
+ sta_info->sleeping = false;
break;
}
}
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index cb70ed7..e94084f 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -104,12 +104,60 @@
spin_unlock_bh(&ar->tx_stats_lock);
}
+/* needs rcu_read_lock */
+static struct ieee80211_sta *__carl9170_get_tx_sta(struct ar9170 *ar,
+ struct sk_buff *skb)
+{
+ struct _carl9170_tx_superframe *super = (void *) skb->data;
+ struct ieee80211_hdr *hdr = (void *) super->frame_data;
+ struct ieee80211_vif *vif;
+ unsigned int vif_id;
+
+ vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >>
+ CARL9170_TX_SUPER_MISC_VIF_ID_S;
+
+ if (WARN_ON_ONCE(vif_id >= AR9170_MAX_VIRTUAL_MAC))
+ return NULL;
+
+ vif = rcu_dereference(ar->vif_priv[vif_id].vif);
+ if (unlikely(!vif))
+ return NULL;
+
+ /*
+ * Normally we should use wrappers like ieee80211_get_DA to get
+ * the correct peer ieee80211_sta.
+ *
+ * But there is a problem with indirect traffic (broadcasts, or
+ * data which is designated for other stations) in station mode.
+ * The frame will be directed to the AP for distribution and not
+ * to the actual destination.
+ */
+
+ return ieee80211_find_sta(vif, hdr->addr1);
+}
+
+static void carl9170_tx_ps_unblock(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_sta *sta;
+ struct carl9170_sta_info *sta_info;
+
+ rcu_read_lock();
+ sta = __carl9170_get_tx_sta(ar, skb);
+ if (unlikely(!sta))
+ goto out_rcu;
+
+ sta_info = (struct carl9170_sta_info *) sta->drv_priv;
+ if (atomic_dec_return(&sta_info->pending_frames) == 0)
+ ieee80211_sta_block_awake(ar->hw, sta, false);
+
+out_rcu:
+ rcu_read_unlock();
+}
+
static void carl9170_tx_accounting_free(struct ar9170 *ar, struct sk_buff *skb)
{
- struct ieee80211_tx_info *txinfo;
int queue;
- txinfo = IEEE80211_SKB_CB(skb);
queue = skb_get_queue_mapping(skb);
spin_lock_bh(&ar->tx_stats_lock);
@@ -135,6 +183,7 @@
}
spin_unlock_bh(&ar->tx_stats_lock);
+
if (atomic_dec_and_test(&ar->tx_total_queued))
complete(&ar->tx_flush);
}
@@ -329,13 +378,9 @@
{
struct _carl9170_tx_superframe *super = (void *) skb->data;
struct ieee80211_hdr *hdr = (void *) super->frame_data;
- struct ieee80211_tx_info *tx_info;
- struct carl9170_tx_info *ar_info;
- struct carl9170_sta_info *sta_info;
struct ieee80211_sta *sta;
+ struct carl9170_sta_info *sta_info;
struct carl9170_sta_tid *tid_info;
- struct ieee80211_vif *vif;
- unsigned int vif_id;
u8 tid;
if (!(txinfo->flags & IEEE80211_TX_CTL_AMPDU) ||
@@ -343,30 +388,8 @@
(!(super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_AGGR))))
return;
- tx_info = IEEE80211_SKB_CB(skb);
- ar_info = (void *) tx_info->rate_driver_data;
-
- vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >>
- CARL9170_TX_SUPER_MISC_VIF_ID_S;
-
- if (WARN_ON_ONCE(vif_id >= AR9170_MAX_VIRTUAL_MAC))
- return;
-
rcu_read_lock();
- vif = rcu_dereference(ar->vif_priv[vif_id].vif);
- if (unlikely(!vif))
- goto out_rcu;
-
- /*
- * Normally we should use wrappers like ieee80211_get_DA to get
- * the correct peer ieee80211_sta.
- *
- * But there is a problem with indirect traffic (broadcasts, or
- * data which is designated for other stations) in station mode.
- * The frame will be directed to the AP for distribution and not
- * to the actual destination.
- */
- sta = ieee80211_find_sta(vif, hdr->addr1);
+ sta = __carl9170_get_tx_sta(ar, skb);
if (unlikely(!sta))
goto out_rcu;
@@ -427,6 +450,7 @@
if (txinfo->flags & IEEE80211_TX_CTL_AMPDU)
carl9170_tx_status_process_ampdu(ar, skb, txinfo);
+ carl9170_tx_ps_unblock(ar, skb);
carl9170_tx_put_skb(skb);
}
@@ -540,11 +564,7 @@
struct sk_buff *skb;
struct ieee80211_tx_info *txinfo;
struct carl9170_tx_info *arinfo;
- struct _carl9170_tx_superframe *super;
struct ieee80211_sta *sta;
- struct ieee80211_vif *vif;
- struct ieee80211_hdr *hdr;
- unsigned int vif_id;
rcu_read_lock();
list_for_each_entry_rcu(iter, &ar->tx_ampdu_list, list) {
@@ -562,20 +582,7 @@
msecs_to_jiffies(CARL9170_QUEUE_TIMEOUT)))
goto unlock;
- super = (void *) skb->data;
- hdr = (void *) super->frame_data;
-
- vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >>
- CARL9170_TX_SUPER_MISC_VIF_ID_S;
-
- if (WARN_ON(vif_id >= AR9170_MAX_VIRTUAL_MAC))
- goto unlock;
-
- vif = rcu_dereference(ar->vif_priv[vif_id].vif);
- if (WARN_ON(!vif))
- goto unlock;
-
- sta = ieee80211_find_sta(vif, hdr->addr1);
+ sta = __carl9170_get_tx_sta(ar, skb);
if (WARN_ON(!sta))
goto unlock;
@@ -611,7 +618,6 @@
{
struct sk_buff *skb;
struct ieee80211_tx_info *txinfo;
- struct carl9170_tx_info *arinfo;
unsigned int r, t, q;
bool success = true;
@@ -627,7 +633,6 @@
}
txinfo = IEEE80211_SKB_CB(skb);
- arinfo = (void *) txinfo->rate_driver_data;
if (!(info & CARL9170_TX_STATUS_SUCCESS))
success = false;
@@ -1199,15 +1204,6 @@
arinfo = (void *) info->rate_driver_data;
arinfo->timeout = jiffies;
-
- /*
- * increase ref count to "2".
- * Ref counting is the easiest way to solve the race between
- * the the urb's completion routine: carl9170_tx_callback and
- * wlan tx status functions: carl9170_tx_status/janitor.
- */
- carl9170_tx_get_skb(skb);
-
return skb;
err_unlock:
@@ -1228,6 +1224,36 @@
__carl9170_tx_process_status(ar, super->s.cookie, q);
}
+static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_sta *sta;
+ struct carl9170_sta_info *sta_info;
+
+ rcu_read_lock();
+ sta = __carl9170_get_tx_sta(ar, skb);
+ if (!sta)
+ goto out_rcu;
+
+ sta_info = (void *) sta->drv_priv;
+ if (unlikely(sta_info->sleeping)) {
+ struct ieee80211_tx_info *tx_info;
+
+ rcu_read_unlock();
+
+ tx_info = IEEE80211_SKB_CB(skb);
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ atomic_dec(&ar->tx_ampdu_upload);
+
+ tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ carl9170_tx_status(ar, skb, false);
+ return true;
+ }
+
+out_rcu:
+ rcu_read_unlock();
+ return false;
+}
+
static void carl9170_tx(struct ar9170 *ar)
{
struct sk_buff *skb;
@@ -1247,6 +1273,9 @@
if (unlikely(!skb))
break;
+ if (unlikely(carl9170_tx_ps_drop(ar, skb)))
+ continue;
+
atomic_inc(&ar->tx_total_pending);
q = __carl9170_get_queue(ar, i);
@@ -1256,6 +1285,16 @@
*/
skb_queue_tail(&ar->tx_status[q], skb);
+ /*
+ * increase ref count to "2".
+ * Ref counting is the easiest way to solve the
+ * race between the urb's completion routine:
+ * carl9170_tx_callback
+ * and wlan tx status functions:
+ * carl9170_tx_status/janitor.
+ */
+ carl9170_tx_get_skb(skb);
+
carl9170_usb_tx(ar, skb);
schedule_garbagecollector = true;
}
@@ -1275,7 +1314,6 @@
struct carl9170_sta_info *sta_info;
struct carl9170_sta_tid *agg;
struct sk_buff *iter;
- unsigned int max;
u16 tid, seq, qseq, off;
bool run = false;
@@ -1285,7 +1323,6 @@
rcu_read_lock();
agg = rcu_dereference(sta_info->agg[tid]);
- max = sta_info->ampdu_max_len;
if (!agg)
goto err_unlock_rcu;
@@ -1368,6 +1405,11 @@
* all ressouces which are associated with the frame.
*/
+ if (sta) {
+ struct carl9170_sta_info *stai = (void *) sta->drv_priv;
+ atomic_inc(&stai->pending_frames);
+ }
+
if (info->flags & IEEE80211_TX_CTL_AMPDU) {
run = carl9170_tx_ampdu_queue(ar, sta, skb);
if (run)
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 37b8e11..a61ef3d6 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -23,6 +23,14 @@
#define REG_READ (common->ops->read)
#define REG_WRITE(_ah, _reg, _val) (common->ops->write)(_ah, _val, _reg)
+#define ENABLE_REGWRITE_BUFFER(_ah) \
+ if (common->ops->enable_write_buffer) \
+ common->ops->enable_write_buffer((_ah));
+
+#define REGWRITE_BUFFER_FLUSH(_ah) \
+ if (common->ops->write_flush) \
+ common->ops->write_flush((_ah));
+
#define IEEE80211_WEP_NKID 4 /* number of key ids */
@@ -42,6 +50,8 @@
keyType = REG_READ(ah, AR_KEYTABLE_TYPE(entry));
+ ENABLE_REGWRITE_BUFFER(ah);
+
REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), 0);
REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), 0);
REG_WRITE(ah, AR_KEYTABLE_KEY2(entry), 0);
@@ -66,6 +76,8 @@
}
+ REGWRITE_BUFFER_FLUSH(ah);
+
return true;
}
EXPORT_SYMBOL(ath_hw_keyreset);
@@ -104,9 +116,13 @@
} else {
macLo = macHi = 0;
}
+ ENABLE_REGWRITE_BUFFER(ah);
+
REG_WRITE(ah, AR_KEYTABLE_MAC0(entry), macLo);
REG_WRITE(ah, AR_KEYTABLE_MAC1(entry), macHi | unicast_flag);
+ REGWRITE_BUFFER_FLUSH(ah);
+
return true;
}
@@ -223,6 +239,8 @@
mic3 = get_unaligned_le16(k->kv_txmic + 0) & 0xffff;
mic4 = get_unaligned_le32(k->kv_txmic + 4);
+ ENABLE_REGWRITE_BUFFER(ah);
+
/* Write RX[31:0] and TX[31:16] */
REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), mic0);
REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), mic1);
@@ -236,6 +254,8 @@
REG_WRITE(ah, AR_KEYTABLE_TYPE(micentry),
AR_KEYTABLE_TYPE_CLR);
+ REGWRITE_BUFFER_FLUSH(ah);
+
} else {
/*
* TKIP uses four key cache entries (two for group
@@ -258,6 +278,8 @@
mic0 = get_unaligned_le32(k->kv_mic + 0);
mic2 = get_unaligned_le32(k->kv_mic + 4);
+ ENABLE_REGWRITE_BUFFER(ah);
+
/* Write MIC key[31:0] */
REG_WRITE(ah, AR_KEYTABLE_KEY0(micentry), mic0);
REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), 0);
@@ -270,8 +292,12 @@
REG_WRITE(ah, AR_KEYTABLE_KEY4(micentry), 0);
REG_WRITE(ah, AR_KEYTABLE_TYPE(micentry),
AR_KEYTABLE_TYPE_CLR);
+
+ REGWRITE_BUFFER_FLUSH(ah);
}
+ ENABLE_REGWRITE_BUFFER(ah);
+
/* MAC address registers are reserved for the MIC entry */
REG_WRITE(ah, AR_KEYTABLE_MAC0(micentry), 0);
REG_WRITE(ah, AR_KEYTABLE_MAC1(micentry), 0);
@@ -283,7 +309,11 @@
*/
REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), key0);
REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), key1);
+
+ REGWRITE_BUFFER_FLUSH(ah);
} else {
+ ENABLE_REGWRITE_BUFFER(ah);
+
/* Write key[47:0] */
REG_WRITE(ah, AR_KEYTABLE_KEY0(entry), key0);
REG_WRITE(ah, AR_KEYTABLE_KEY1(entry), key1);
@@ -296,6 +326,8 @@
REG_WRITE(ah, AR_KEYTABLE_KEY4(entry), key4);
REG_WRITE(ah, AR_KEYTABLE_TYPE(entry), keyType);
+ REGWRITE_BUFFER_FLUSH(ah);
+
/* Write MAC address for the entry */
(void) ath_hw_keysetmac(common, entry, mac);
}
@@ -451,6 +483,9 @@
memset(&hk, 0, sizeof(hk));
switch (key->cipher) {
+ case 0:
+ hk.kv_type = ATH_CIPHER_CLR;
+ break;
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
hk.kv_type = ATH_CIPHER_WEP;
@@ -466,7 +501,8 @@
}
hk.kv_len = key->keylen;
- memcpy(hk.kv_val, key->key, key->keylen);
+ if (key->keylen)
+ memcpy(hk.kv_val, key->key, key->keylen);
if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
switch (vif->type) {
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 0e1b879..028310f 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -97,8 +97,8 @@
}
};
-/* Can be used by 0x67, 0x6A and 0x68 */
-static const struct ieee80211_regdomain ath_world_regdom_67_68_6A = {
+/* Can be used by 0x67, 0x68, 0x6A and 0x6C */
+static const struct ieee80211_regdomain ath_world_regdom_67_68_6A_6C = {
.n_reg_rules = 4,
.alpha2 = "99",
.reg_rules = {
@@ -151,7 +151,8 @@
case 0x67:
case 0x68:
case 0x6A:
- return &ath_world_regdom_67_68_6A;
+ case 0x6C:
+ return &ath_world_regdom_67_68_6A_6C;
default:
WARN_ON(1);
return ath_default_world_regdomain();
@@ -333,6 +334,7 @@
case 0x63:
case 0x66:
case 0x67:
+ case 0x6C:
ath_reg_apply_beaconing_flags(wiphy, initiator);
break;
case 0x68:
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 5c2cfe6..24b5383 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -86,6 +86,7 @@
WOR9_WORLD = 0x69,
WORA_WORLD = 0x6A,
WORB_WORLD = 0x6B,
+ WORC_WORLD = 0x6C,
MKK3_MKKB = 0x80,
MKK3_MKKA2 = 0x81,
@@ -282,6 +283,7 @@
{WOR9_WORLD, NO_CTL, NO_CTL},
{WORA_WORLD, NO_CTL, NO_CTL},
{WORB_WORLD, NO_CTL, NO_CTL},
+ {WORC_WORLD, NO_CTL, NO_CTL},
};
static struct country_code_to_enum_rd allCountries[] = {
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index d59b016..5a43984 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -72,6 +72,7 @@
MODULE_FIRMWARE("b43/ucode13.fw");
MODULE_FIRMWARE("b43/ucode14.fw");
MODULE_FIRMWARE("b43/ucode15.fw");
+MODULE_FIRMWARE("b43/ucode16_mimo.fw");
MODULE_FIRMWARE("b43/ucode5.fw");
MODULE_FIRMWARE("b43/ucode9.fw");
@@ -2685,6 +2686,17 @@
dev->mac_suspended++;
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
+void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
+{
+ u32 tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
+ if (on)
+ tmslow |= B43_TMSLOW_MACPHYCLKEN;
+ else
+ tmslow &= ~B43_TMSLOW_MACPHYCLKEN;
+ ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
+}
+
static void b43_adjust_opmode(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
@@ -2841,7 +2853,7 @@
{
struct b43_phy *phy = &dev->phy;
int err;
- u32 value32, macctl;
+ u32 macctl;
u16 value16;
/* Initialize the MAC control */
@@ -2919,9 +2931,7 @@
b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
- value32 = ssb_read32(dev->dev, SSB_TMSLOW);
- value32 |= 0x00100000;
- ssb_write32(dev->dev, SSB_TMSLOW, value32);
+ b43_mac_phy_clock_set(dev, true);
b43_write16(dev, B43_MMIO_POWERUP_DELAY,
dev->dev->bus->chipco.fast_pwrup_delay);
@@ -4212,33 +4222,18 @@
static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
{
-#ifdef CONFIG_SSB_DRIVER_PCICORE
struct ssb_bus *bus = dev->dev->bus;
u32 tmp;
- if (bus->pcicore.dev &&
- bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
- bus->pcicore.dev->id.revision <= 5) {
- /* IMCFGLO timeouts workaround. */
+ if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
+ (bus->chip_id == 0x4312)) {
tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
- switch (bus->bustype) {
- case SSB_BUSTYPE_PCI:
- case SSB_BUSTYPE_PCMCIA:
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 0x32;
- break;
- case SSB_BUSTYPE_SSB:
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 0x53;
- break;
- default:
- break;
- }
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp &= ~SSB_IMCFGLO_SERTO;
+ tmp |= 0x3;
ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
+ ssb_commit_settings(bus);
}
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
}
static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
@@ -4862,25 +4857,8 @@
static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
{
struct b43_wldev *wldev;
- struct pci_dev *pdev;
int err = -ENOMEM;
- if (!list_empty(&wl->devlist)) {
- /* We are not the first core on this chip. */
- pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
- /* Only special chips support more than one wireless
- * core, although some of the other chips have more than
- * one wireless core as well. Check for this and
- * bail out early.
- */
- if (!pdev ||
- ((pdev->device != 0x4321) &&
- (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
- b43dbg(wl, "Ignoring unconnected 802.11 core\n");
- return -ENODEV;
- }
- }
-
wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
if (!wldev)
goto out;
@@ -5001,7 +4979,7 @@
return err;
}
-static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
+static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
{
struct b43_wl *wl;
int err;
@@ -5039,7 +5017,7 @@
return err;
}
-static void b43_remove(struct ssb_device *dev)
+static void b43_ssb_remove(struct ssb_device *dev)
{
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
@@ -5082,8 +5060,8 @@
static struct ssb_driver b43_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43_ssb_tbl,
- .probe = b43_probe,
- .remove = b43_remove,
+ .probe = b43_ssb_probe,
+ .remove = b43_ssb_remove,
};
static void b43_print_driverinfo(void)
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 40db036..a0d327f 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -133,6 +133,7 @@
void b43_mac_suspend(struct b43_wldev *dev);
void b43_mac_enable(struct b43_wldev *dev);
+void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on);
struct b43_request_fw_context;
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8a00f9a..b075a3f 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -2281,6 +2281,7 @@
save_regs_phy[5] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
save_regs_phy[6] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B1S0);
save_regs_phy[7] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B32S1);
+ save_regs_phy[8] = 0;
} else {
save_regs_phy[0] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
save_regs_phy[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
@@ -2289,6 +2290,8 @@
save_regs_phy[4] = b43_phy_read(dev, B43_NPHY_RFCTL_OVER);
save_regs_phy[5] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO1);
save_regs_phy[6] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO2);
+ save_regs_phy[7] = 0;
+ save_regs_phy[8] = 0;
}
b43_nphy_rssi_select(dev, 5, type);
@@ -3537,17 +3540,6 @@
return b43_nphy_rev2_cal_rx_iq(dev, target, type, debug);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
-static void b43_nphy_mac_phy_clock_set(struct b43_wldev *dev, bool on)
-{
- u32 tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
- if (on)
- tmslow |= B43_TMSLOW_MACPHYCLKEN;
- else
- tmslow &= ~B43_TMSLOW_MACPHYCLKEN;
- ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCoreSetState */
static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
{
@@ -3688,7 +3680,7 @@
b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA);
b43_nphy_bmac_clock_fgc(dev, 0);
- b43_nphy_mac_phy_clock_set(dev, true);
+ b43_mac_phy_clock_set(dev, true);
b43_nphy_pa_override(dev, false);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
@@ -3845,8 +3837,8 @@
{
struct b43_phy *phy = &dev->phy;
- const struct b43_nphy_channeltab_entry_rev2 *tabent_r2;
- const struct b43_nphy_channeltab_entry_rev3 *tabent_r3;
+ const struct b43_nphy_channeltab_entry_rev2 *tabent_r2 = NULL;
+ const struct b43_nphy_channeltab_entry_rev3 *tabent_r3 = NULL;
u8 tmp;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c7fd73e..1ab8861 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2234,7 +2234,7 @@
b43legacy_write32(dev, B43legacy_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
value32 = ssb_read32(dev->dev, SSB_TMSLOW);
- value32 |= 0x00100000;
+ value32 |= B43legacy_TMSLOW_MACPHYCLKEN;
ssb_write32(dev->dev, SSB_TMSLOW, value32);
b43legacy_write16(dev, B43legacy_MMIO_POWERUP_DELAY,
@@ -3104,37 +3104,6 @@
memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
}
-static void b43legacy_imcfglo_timeouts_workaround(struct b43legacy_wldev *dev)
-{
-#ifdef CONFIG_SSB_DRIVER_PCICORE
- struct ssb_bus *bus = dev->dev->bus;
- u32 tmp;
-
- if (bus->pcicore.dev &&
- bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
- bus->pcicore.dev->id.revision <= 5) {
- /* IMCFGLO timeouts workaround. */
- tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
- switch (bus->bustype) {
- case SSB_BUSTYPE_PCI:
- case SSB_BUSTYPE_PCMCIA:
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 0x32;
- break;
- case SSB_BUSTYPE_SSB:
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 0x53;
- break;
- default:
- break;
- }
- ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
- }
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
-}
-
static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
bool idle) {
u16 pu_delay = 1050;
@@ -3278,7 +3247,6 @@
/* Enable IRQ routing to this device. */
ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
- b43legacy_imcfglo_timeouts_workaround(dev);
prepare_phy_data_for_init(dev);
b43legacy_phy_calibrate(dev);
err = b43legacy_chip_init(dev);
@@ -3728,26 +3696,8 @@
struct b43legacy_wl *wl)
{
struct b43legacy_wldev *wldev;
- struct pci_dev *pdev;
int err = -ENOMEM;
- if (!list_empty(&wl->devlist)) {
- /* We are not the first core on this chip. */
- pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
- /* Only special chips support more than one wireless
- * core, although some of the other chips have more than
- * one wireless core as well. Check for this and
- * bail out early.
- */
- if (!pdev ||
- ((pdev->device != 0x4321) &&
- (pdev->device != 0x4313) &&
- (pdev->device != 0x431A))) {
- b43legacydbg(wl, "Ignoring unconnected 802.11 core\n");
- return -ENODEV;
- }
- }
-
wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
if (!wldev)
goto out;
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 1d9aed6..d508482 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -79,13 +79,8 @@
if (!rtnl_locked)
rtnl_lock();
- ret = 0;
- if (strchr(dev->name, '%'))
- ret = dev_alloc_name(dev, dev->name);
-
SET_NETDEV_DEV(dev, mdev->dev.parent);
- if (ret >= 0)
- ret = register_netdevice(dev);
+ ret = register_netdevice(dev);
if (!rtnl_locked)
rtnl_unlock();
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
index 5a8a3cc..7e5e85a 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
@@ -955,9 +955,6 @@
if (priv->cfg->scan_rx_antennas[band])
rx_ant = priv->cfg->scan_rx_antennas[band];
- if (priv->cfg->scan_tx_antennas[band])
- scan_tx_antennas = priv->cfg->scan_tx_antennas[band];
-
priv->scan_tx_ant[band] = iwl4965_toggle_tx_ant(priv,
priv->scan_tx_ant[band],
scan_tx_antennas);
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
index 31ac672..24d1499 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
@@ -2604,7 +2604,7 @@
struct iwl_lq_sta *lq_sta = file->private_data;
struct iwl_priv *priv;
char buf[64];
- int buf_size;
+ size_t buf_size;
u32 parsed_rate;
struct iwl_station_priv *sta_priv =
container_of(lq_sta, struct iwl_station_priv, lq_sta);
@@ -2860,7 +2860,6 @@
int iwl4965_rate_control_register(void)
{
- pr_err("Registering 4965 rate control operations\n");
return ieee80211_rate_control_register(&rs_4965_ops);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
index 5c40502f..79ac081 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
@@ -316,12 +316,18 @@
hdr_len = ieee80211_hdrlen(fc);
- /* Find index into station table for destination station */
- sta_id = iwl_legacy_sta_id_or_broadcast(priv, ctx, info->control.sta);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop_unlock;
+ /* For management frames use broadcast id to do not break aggregation */
+ if (!ieee80211_is_data(fc))
+ sta_id = ctx->bcast_sta_id;
+ else {
+ /* Find index into station table for destination station */
+ sta_id = iwl_legacy_sta_id_or_broadcast(priv, ctx, info->control.sta);
+
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+ hdr->addr1);
+ goto drop_unlock;
+ }
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -1127,12 +1133,16 @@
q->read_ptr = iwl_legacy_queue_inc_wrap(q->read_ptr, q->n_bd)) {
tx_info = &txq->txb[txq->q.read_ptr];
- iwl4965_tx_status(priv, tx_info,
- txq_id >= IWL4965_FIRST_AMPDU_QUEUE);
+
+ if (WARN_ON_ONCE(tx_info->skb == NULL))
+ continue;
hdr = (struct ieee80211_hdr *)tx_info->skb->data;
- if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+ if (ieee80211_is_data_qos(hdr->frame_control))
nfreed++;
+
+ iwl4965_tx_status(priv, tx_info,
+ txq_id >= IWL4965_FIRST_AMPDU_QUEUE);
tx_info->skb = NULL;
priv->cfg->ops->lib->txq_free_tfd(priv, txq);
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index c1511b1..42df832 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -211,10 +211,7 @@
if (!iwl_legacy_is_channel_valid(ch))
continue;
- if (iwl_legacy_is_channel_a_band(ch))
- sband = &priv->bands[IEEE80211_BAND_5GHZ];
- else
- sband = &priv->bands[IEEE80211_BAND_2GHZ];
+ sband = &priv->bands[ch->band];
geo_ch = &sband->channels[sband->n_channels++];
@@ -2117,10 +2114,9 @@
IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
channel->hw_value, changed);
- if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
- test_bit(STATUS_SCANNING, &priv->status))) {
+ if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
scan_active = 1;
- IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+ IWL_DEBUG_MAC80211(priv, "scan active\n");
}
if (changed & (IEEE80211_CONF_CHANGE_SMPS |
@@ -2155,6 +2151,13 @@
goto set_ch_out;
}
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+ !iwl_legacy_is_channel_ibss(ch_info)) {
+ IWL_DEBUG_MAC80211(priv, "leave - not IBSS channel\n");
+ ret = -EINVAL;
+ goto set_ch_out;
+ }
+
spin_lock_irqsave(&priv->lock, flags);
for_each_context(priv, ctx) {
@@ -2433,11 +2436,13 @@
IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
- if (!iwl_legacy_is_alive(priv))
- return;
-
mutex_lock(&priv->mutex);
+ if (!iwl_legacy_is_alive(priv)) {
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
if (changes & BSS_CHANGED_QOS) {
unsigned long flags;
@@ -2646,7 +2651,7 @@
none:
/* re-enable interrupts here since we don't have anything to service. */
- /* only Re-enable if diabled by irq */
+ /* only Re-enable if disabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_legacy_enable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h
index f03b463..bc66c60 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.h
+++ b/drivers/net/wireless/iwlegacy/iwl-core.h
@@ -287,7 +287,6 @@
struct iwl_base_params *base_params;
/* params likely to change within a device family */
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
- u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
enum iwl_led_mode led_mode;
};
diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h
index 9ee849d..be0106c 100644
--- a/drivers/net/wireless/iwlegacy/iwl-dev.h
+++ b/drivers/net/wireless/iwlegacy/iwl-dev.h
@@ -134,7 +134,7 @@
* space more than this */
int high_mark; /* high watermark, stop queue if free
* space less than this */
-} __packed;
+};
/* One for each TFD */
struct iwl_tx_info {
@@ -290,6 +290,7 @@
CMD_SIZE_HUGE = (1 << 0),
CMD_ASYNC = (1 << 1),
CMD_WANT_SKB = (1 << 2),
+ CMD_MAPPED = (1 << 3),
};
#define DEF_CMD_PAYLOAD_SIZE 320
@@ -1076,7 +1077,6 @@
spinlock_t hcmd_lock; /* protect hcmd */
spinlock_t reg_lock; /* protect hw register access */
struct mutex mutex;
- struct mutex sync_cmd_mutex; /* enable serialization of sync commands */
/* basic pci-network driver stuff */
struct pci_dev *pci_dev;
@@ -1411,6 +1411,12 @@
return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
}
+static inline int
+iwl_legacy_is_channel_ibss(const struct iwl_channel_info *ch)
+{
+ return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0;
+}
+
static inline void
__iwl_legacy_free_pages(struct iwl_priv *priv, struct page *page)
{
diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
index 9d721cb..62b4b09 100644
--- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
@@ -145,6 +145,8 @@
int cmd_idx;
int ret;
+ lockdep_assert_held(&priv->mutex);
+
BUG_ON(cmd->flags & CMD_ASYNC);
/* A synchronous command can not have a callback set. */
@@ -152,7 +154,6 @@
IWL_DEBUG_INFO(priv, "Attempting to send sync command %s\n",
iwl_legacy_get_cmd_string(cmd->id));
- mutex_lock(&priv->sync_cmd_mutex);
set_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s\n",
@@ -224,7 +225,6 @@
cmd->reply_page = 0;
}
out:
- mutex_unlock(&priv->sync_cmd_mutex);
return ret;
}
EXPORT_SYMBOL(iwl_legacy_send_cmd_sync);
diff --git a/drivers/net/wireless/iwlegacy/iwl-helpers.h b/drivers/net/wireless/iwlegacy/iwl-helpers.h
index 02132e7..a6effda 100644
--- a/drivers/net/wireless/iwlegacy/iwl-helpers.h
+++ b/drivers/net/wireless/iwlegacy/iwl-helpers.h
@@ -149,6 +149,12 @@
IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
}
+static inline void iwl_legacy_enable_rfkill_int(struct iwl_priv *priv)
+{
+ IWL_DEBUG_ISR(priv, "Enabling rfkill interrupt\n");
+ iwl_write32(priv, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
+}
+
static inline void iwl_legacy_enable_interrupts(struct iwl_priv *priv)
{
IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
diff --git a/drivers/net/wireless/iwlegacy/iwl-led.c b/drivers/net/wireless/iwlegacy/iwl-led.c
index 15eb8b7..bda0d61 100644
--- a/drivers/net/wireless/iwlegacy/iwl-led.c
+++ b/drivers/net/wireless/iwlegacy/iwl-led.c
@@ -48,8 +48,21 @@
MODULE_PARM_DESC(led_mode, "0=system default, "
"1=On(RF On)/Off(RF Off), 2=blinking");
+/* Throughput OFF time(ms) ON time (ms)
+ * >300 25 25
+ * >200 to 300 40 40
+ * >100 to 200 55 55
+ * >70 to 100 65 65
+ * >50 to 70 75 75
+ * >20 to 50 85 85
+ * >10 to 20 95 95
+ * >5 to 10 110 110
+ * >1 to 5 130 130
+ * >0 to 1 167 167
+ * <=0 SOLID ON
+ */
static const struct ieee80211_tpt_blink iwl_blink[] = {
- { .throughput = 0 * 1024 - 1, .blink_time = 334 },
+ { .throughput = 0, .blink_time = 334 },
{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
@@ -101,6 +114,11 @@
if (priv->blink_on == on && priv->blink_off == off)
return 0;
+ if (off == 0) {
+ /* led is SOLID_ON */
+ on = IWL_LED_SOLID;
+ }
+
IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n",
priv->cfg->base_params->led_compensation);
led_cmd.on = iwl_legacy_blink_compensation(priv, on,
diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c
index a227773..4fff995 100644
--- a/drivers/net/wireless/iwlegacy/iwl-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-tx.c
@@ -146,33 +146,32 @@
{
struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
struct iwl_queue *q = &txq->q;
- bool huge = false;
int i;
if (q->n_bd == 0)
return;
while (q->read_ptr != q->write_ptr) {
- /* we have no way to tell if it is a huge cmd ATM */
i = iwl_legacy_get_cmd_index(q, q->read_ptr, 0);
- if (txq->meta[i].flags & CMD_SIZE_HUGE)
- huge = true;
- else
+ if (txq->meta[i].flags & CMD_MAPPED) {
pci_unmap_single(priv->pci_dev,
dma_unmap_addr(&txq->meta[i], mapping),
dma_unmap_len(&txq->meta[i], len),
PCI_DMA_BIDIRECTIONAL);
+ txq->meta[i].flags = 0;
+ }
q->read_ptr = iwl_legacy_queue_inc_wrap(q->read_ptr, q->n_bd);
}
- if (huge) {
- i = q->n_window;
+ i = q->n_window;
+ if (txq->meta[i].flags & CMD_MAPPED) {
pci_unmap_single(priv->pci_dev,
dma_unmap_addr(&txq->meta[i], mapping),
dma_unmap_len(&txq->meta[i], len),
PCI_DMA_BIDIRECTIONAL);
+ txq->meta[i].flags = 0;
}
}
EXPORT_SYMBOL(iwl_legacy_cmd_queue_unmap);
@@ -467,29 +466,27 @@
return -EIO;
}
- if (iwl_legacy_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
- IWL_ERR(priv, "No space in command queue\n");
- IWL_ERR(priv, "Restarting adapter due to queue full\n");
- queue_work(priv->workqueue, &priv->restart);
- return -ENOSPC;
- }
-
spin_lock_irqsave(&priv->hcmd_lock, flags);
- /* If this is a huge cmd, mark the huge flag also on the meta.flags
- * of the _original_ cmd. This is used for DMA mapping clean up.
- */
- if (cmd->flags & CMD_SIZE_HUGE) {
- idx = iwl_legacy_get_cmd_index(q, q->write_ptr, 0);
- txq->meta[idx].flags = CMD_SIZE_HUGE;
+ if (iwl_legacy_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
+
+ IWL_ERR(priv, "Restarting adapter due to command queue full\n");
+ queue_work(priv->workqueue, &priv->restart);
+ return -ENOSPC;
}
idx = iwl_legacy_get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
out_cmd = txq->cmd[idx];
out_meta = &txq->meta[idx];
+ if (WARN_ON(out_meta->flags & CMD_MAPPED)) {
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
+ return -ENOSPC;
+ }
+
memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */
- out_meta->flags = cmd->flags;
+ out_meta->flags = cmd->flags | CMD_MAPPED;
if (cmd->flags & CMD_WANT_SKB)
out_meta->source = cmd;
if (cmd->flags & CMD_ASYNC)
@@ -610,6 +607,7 @@
struct iwl_device_cmd *cmd;
struct iwl_cmd_meta *meta;
struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
+ unsigned long flags;
/* If a Tx command is being handled and it isn't in the actual
* command queue then there a command routing bug has been introduced
@@ -623,14 +621,6 @@
return;
}
- /* If this is a huge cmd, clear the huge flag on the meta.flags
- * of the _original_ cmd. So that iwl_legacy_cmd_queue_free won't unmap
- * the DMA buffer for the scan (huge) command.
- */
- if (huge) {
- cmd_index = iwl_legacy_get_cmd_index(&txq->q, index, 0);
- txq->meta[cmd_index].flags = 0;
- }
cmd_index = iwl_legacy_get_cmd_index(&txq->q, index, huge);
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
@@ -647,6 +637,8 @@
} else if (meta->callback)
meta->callback(priv, cmd, pkt);
+ spin_lock_irqsave(&priv->hcmd_lock, flags);
+
iwl_legacy_hcmd_queue_reclaim(priv, txq_id, index, cmd_index);
if (!(meta->flags & CMD_ASYNC)) {
@@ -655,6 +647,10 @@
iwl_legacy_get_cmd_string(cmd->hdr.cmd));
wake_up_interruptible(&priv->wait_command_queue);
}
+
+ /* Mark as unmapped */
meta->flags = 0;
+
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
}
EXPORT_SYMBOL(iwl_legacy_tx_cmd_complete);
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index cc7ebce..0ee6be6 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -2748,11 +2748,12 @@
struct iwl_priv *priv =
container_of(data, struct iwl_priv, init_alive_start.work);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ goto out;
+
iwl3945_init_alive_start(priv);
+out:
mutex_unlock(&priv->mutex);
}
@@ -2761,11 +2762,12 @@
struct iwl_priv *priv =
container_of(data, struct iwl_priv, alive_start.work);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ goto out;
+
iwl3945_alive_start(priv);
+out:
mutex_unlock(&priv->mutex);
}
@@ -2995,10 +2997,12 @@
} else {
iwl3945_down(priv);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
__iwl3945_up(priv);
mutex_unlock(&priv->mutex);
}
@@ -3009,11 +3013,12 @@
struct iwl_priv *priv =
container_of(data, struct iwl_priv, rx_replenish);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ goto out;
+
iwl3945_rx_replenish(priv);
+out:
mutex_unlock(&priv->mutex);
}
@@ -3810,7 +3815,6 @@
INIT_LIST_HEAD(&priv->free_frames);
mutex_init(&priv->mutex);
- mutex_init(&priv->sync_cmd_mutex);
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index d484c36..af2ae22 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -1069,9 +1069,12 @@
}
/* Re-enable all interrupts */
- /* only Re-enable if diabled by irq */
+ /* only Re-enable if disabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_legacy_enable_interrupts(priv);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ iwl_legacy_enable_rfkill_int(priv);
#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) {
@@ -2139,7 +2142,7 @@
static void __iwl4965_down(struct iwl_priv *priv)
{
unsigned long flags;
- int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
+ int exit_pending;
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
@@ -2401,11 +2404,12 @@
struct iwl_priv *priv =
container_of(data, struct iwl_priv, init_alive_start.work);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ goto out;
+
priv->cfg->ops->lib->init_alive_start(priv);
+out:
mutex_unlock(&priv->mutex);
}
@@ -2414,11 +2418,12 @@
struct iwl_priv *priv =
container_of(data, struct iwl_priv, alive_start.work);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ goto out;
+
iwl4965_alive_start(priv);
+out:
mutex_unlock(&priv->mutex);
}
@@ -2468,10 +2473,12 @@
} else {
iwl4965_down(priv);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
__iwl4965_up(priv);
mutex_unlock(&priv->mutex);
}
@@ -2624,9 +2631,10 @@
flush_workqueue(priv->workqueue);
- /* enable interrupts again in order to receive rfkill changes */
+ /* User space software may expect getting rfkill changes
+ * even if interface is down */
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl_legacy_enable_interrupts(priv);
+ iwl_legacy_enable_rfkill_int(priv);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
@@ -2847,21 +2855,22 @@
IWL_DEBUG_MAC80211(priv, "enter\n");
+ mutex_lock(&priv->mutex);
+
if (iwl_legacy_is_rfkill(priv))
- goto out_exit;
+ goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
- goto out_exit;
+ goto out;
if (!iwl_legacy_is_associated_ctx(ctx))
- goto out_exit;
+ goto out;
/* channel switch in progress */
if (priv->switch_rxon.switch_in_progress == true)
- goto out_exit;
+ goto out;
- mutex_lock(&priv->mutex);
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
@@ -2917,7 +2926,6 @@
}
out:
mutex_unlock(&priv->mutex);
-out_exit:
if (!priv->switch_rxon.switch_in_progress)
ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
@@ -2984,15 +2992,15 @@
struct iwl_priv *priv = container_of(work, struct iwl_priv,
txpower_work);
+ mutex_lock(&priv->mutex);
+
/* If a scan happened to start before we got here
* then just return; the statistics notification will
* kick off another scheduled work to compensate for
* any temperature delta we missed here. */
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
+ goto out;
/* Regardless of if we are associated, we must reconfigure the
* TX power since frames can be sent on non-radar channels while
@@ -3002,7 +3010,7 @@
/* Update last_temperature to keep is_calib_needed from running
* when it isn't needed... */
priv->last_temperature = priv->temperature;
-
+out:
mutex_unlock(&priv->mutex);
}
@@ -3116,7 +3124,6 @@
INIT_LIST_HEAD(&priv->free_frames);
mutex_init(&priv->mutex);
- mutex_init(&priv->sync_cmd_mutex);
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
@@ -3173,7 +3180,7 @@
{
priv->hw_rev = _iwl_legacy_read32(priv, CSR_HW_REV);
priv->hw_wa_rev = _iwl_legacy_read32(priv, CSR_HW_REV_WA_REG);
- pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
+ priv->rev_id = priv->pci_dev->revision;
IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id);
}
@@ -3406,14 +3413,14 @@
* 8. Enable interrupts and read RFKILL state
*********************************************/
- /* enable interrupts if needed: hw bug w/a */
+ /* enable rfkill interrupt: hw bug w/a */
pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
}
- iwl_legacy_enable_interrupts(priv);
+ iwl_legacy_enable_rfkill_int(priv);
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(priv, CSR_GP_CNTRL) &
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 17d555f..ad3bdba 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -102,6 +102,16 @@
occur.
endmenu
+config IWLWIFI_DEVICE_SVTOOL
+ bool "iwlwifi device svtool support"
+ depends on IWLAGN
+ select NL80211_TESTMODE
+ help
+ This option enables the svtool support for iwlwifi device through
+ NL80211_TESTMODE. svtool is a software validation tool that runs in
+ the user space and interacts with the device in the kernel space
+ through the generic netlink message via NL80211_TESTMODE channel.
+
config IWL_P2P
bool "iwlwifi experimental P2P support"
depends on IWLAGN
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 9d6ee83..8226604 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,8 +1,8 @@
# AGN
obj-$(CONFIG_IWLAGN) += iwlagn.o
-iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
+iwlagn-objs := iwl-agn.o iwl-agn-rs.o
iwlagn-objs += iwl-agn-ucode.o iwl-agn-tx.o
-iwlagn-objs += iwl-agn-lib.o iwl-agn-calib.o
+iwlagn-objs += iwl-agn-lib.o iwl-agn-calib.o iwl-io.o
iwlagn-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-eeprom.o
iwlagn-objs += iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
@@ -14,9 +14,9 @@
iwlagn-objs += iwl-1000.o
iwlagn-objs += iwl-2000.o
-iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
+iwlagn-$(CONFIG_IWLWIFI_DEVICE_SVTOOL) += iwl-sv-open.o
CFLAGS_iwl-devtrace.o := -I$(src)
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 27c5007..b4c8193 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -45,8 +45,6 @@
#include "iwl-agn.h"
#include "iwl-helpers.h"
#include "iwl-agn-hw.h"
-#include "iwl-agn-led.h"
-#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL1000_UCODE_API_MAX 5
@@ -57,12 +55,10 @@
#define IWL100_UCODE_API_MIN 5
#define IWL1000_FW_PRE "iwlwifi-1000-"
-#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
-#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
+#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
#define IWL100_FW_PRE "iwlwifi-100-"
-#define _IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode"
-#define IWL100_MODULE_FIRMWARE(api) _IWL100_MODULE_FIRMWARE(api)
+#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode"
/*
@@ -124,10 +120,10 @@
static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
+ iwlagn_mod_params.num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
@@ -141,7 +137,6 @@
priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
@@ -176,24 +171,13 @@
static struct iwl_lib_ops iwl1000_lib = {
.set_hw_params = iwl1000_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
- .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
- .txq_agg_enable = iwlagn_txq_agg_enable,
- .txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
- .load_ucode = iwlagn_load_ucode,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_csr = iwl_dump_csr,
- .dump_fh = iwl_dump_fh,
- .init_alive_start = iwlagn_init_alive_start,
- .alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
@@ -208,45 +192,21 @@
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
+ EEPROM_REGULATORY_BAND_NO_HT40,
},
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
},
- .isr_ops = {
- .isr = iwl_isr_ict,
- .free = iwl_free_isr_ict,
- .alloc = iwl_alloc_isr_ict,
- .reset = iwl_reset_ict,
- .disable = iwl_disable_ict,
- },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
- .tt_ops = {
- .lower_power_detection = iwl_tt_is_low_power_state,
- .tt_power_mode = iwl_tt_current_power_mode,
- .ct_kill_check = iwl_check_for_ct_kill,
- }
};
static const struct iwl_ops iwl1000_ops = {
.lib = &iwl1000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static struct iwl_base_params iwl1000_base_params = {
@@ -254,8 +214,6 @@
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
- .set_l0s = true,
- .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.led_compensation = 51,
@@ -265,9 +223,6 @@
.chain_noise_scale = 1000,
.wd_timeout = IWL_DEF_WD_TIMEOUT,
.max_event_log_size = 128,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
};
static struct iwl_ht_params iwl1000_ht_params = {
.ht_greenfield_support = true,
@@ -281,7 +236,6 @@
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.ops = &iwl1000_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl1000_base_params, \
.led_mode = IWL_LED_BLINK
@@ -303,7 +257,6 @@
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.ops = &iwl1000_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl1000_base_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index d7b6126..89b8da7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -46,30 +46,25 @@
#include "iwl-helpers.h"
#include "iwl-agn-hw.h"
#include "iwl-6000-hw.h"
-#include "iwl-agn-led.h"
-#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL2030_UCODE_API_MAX 5
#define IWL2000_UCODE_API_MAX 5
-#define IWL200_UCODE_API_MAX 5
+#define IWL105_UCODE_API_MAX 5
/* Lowest firmware API version supported */
#define IWL2030_UCODE_API_MIN 5
#define IWL2000_UCODE_API_MIN 5
-#define IWL200_UCODE_API_MIN 5
+#define IWL105_UCODE_API_MIN 5
#define IWL2030_FW_PRE "iwlwifi-2030-"
-#define _IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode"
-#define IWL2030_MODULE_FIRMWARE(api) _IWL2030_MODULE_FIRMWARE(api)
+#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode"
#define IWL2000_FW_PRE "iwlwifi-2000-"
-#define _IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode"
-#define IWL2000_MODULE_FIRMWARE(api) _IWL2000_MODULE_FIRMWARE(api)
+#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode"
-#define IWL200_FW_PRE "iwlwifi-200-"
-#define _IWL200_MODULE_FIRMWARE(api) IWL200_FW_PRE #api ".ucode"
-#define IWL200_MODULE_FIRMWARE(api) _IWL200_MODULE_FIRMWARE(api)
+#define IWL105_FW_PRE "iwlwifi-105-"
+#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE #api ".ucode"
static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
{
@@ -101,6 +96,8 @@
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
+ if (priv->cfg->disable_otp_refresh)
+ iwl_write_prph(priv, APMG_ANALOG_SVR_REG, 0x80000010);
}
static struct iwl_sensitivity_ranges iwl2000_sensitivity = {
@@ -130,10 +127,10 @@
static int iwl2000_hw_set_hw_params(struct iwl_priv *priv)
{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
+ iwlagn_mod_params.num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
@@ -147,7 +144,6 @@
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
@@ -256,11 +252,7 @@
static struct iwl_lib_ops iwl2000_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
- .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
- .txq_agg_enable = iwlagn_txq_agg_enable,
- .txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
@@ -268,13 +260,6 @@
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
- .load_ucode = iwlagn_load_ucode,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_csr = iwl_dump_csr,
- .dump_fh = iwl_dump_fh,
- .init_alive_start = iwlagn_init_alive_start,
- .alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl2030_hw_channel_switch,
@@ -290,70 +275,40 @@
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
+ EEPROM_REGULATORY_BAND_NO_HT40,
},
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
- .isr_ops = {
- .isr = iwl_isr_ict,
- .free = iwl_free_isr_ict,
- .alloc = iwl_alloc_isr_ict,
- .reset = iwl_reset_ict,
- .disable = iwl_disable_ict,
- },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
- .tt_ops = {
- .lower_power_detection = iwl_tt_is_low_power_state,
- .tt_power_mode = iwl_tt_current_power_mode,
- .ct_kill_check = iwl_check_for_ct_kill,
- }
};
static const struct iwl_ops iwl2000_ops = {
.lib = &iwl2000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl2030_ops = {
.lib = &iwl2000_lib,
.hcmd = &iwlagn_bt_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
-static const struct iwl_ops iwl200_ops = {
+static const struct iwl_ops iwl105_ops = {
.lib = &iwl2000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
-static const struct iwl_ops iwl230_ops = {
+static const struct iwl_ops iwl135_ops = {
.lib = &iwl2000_lib,
.hcmd = &iwlagn_bt_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static struct iwl_base_params iwl2000_base_params = {
@@ -361,8 +316,6 @@
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_2x00,
.shadow_ram_support = true,
.led_compensation = 51,
@@ -373,9 +326,6 @@
.chain_noise_scale = 1000,
.wd_timeout = IWL_DEF_WD_TIMEOUT,
.max_event_log_size = 512,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
.shadow_reg_enable = true,
};
@@ -385,8 +335,6 @@
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_2x00,
.shadow_ram_support = true,
.led_compensation = 57,
@@ -397,9 +345,6 @@
.chain_noise_scale = 1000,
.wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
.shadow_reg_enable = true,
};
@@ -409,7 +354,6 @@
};
static struct iwl_bt_params iwl2030_bt_params = {
- .bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.advanced_bt_coexist = true,
.agg_time_limit = BT_AGG_THRESHOLD_DEF,
@@ -426,12 +370,12 @@
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.ops = &iwl2000_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl2000_base_params, \
.need_dc_calib = true, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE, \
- .iq_invert = true \
+ .iq_invert = true, \
+ .disable_otp_refresh = true \
struct iwl_cfg iwl2000_2bgn_cfg = {
.name = "2000 Series 2x2 BGN",
@@ -451,7 +395,6 @@
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.ops = &iwl2030_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl2030_base_params, \
.bt_params = &iwl2030_bt_params, \
.need_dc_calib = true, \
@@ -471,45 +414,13 @@
IWL_DEVICE_2030,
};
-#define IWL_DEVICE_6035 \
- .fw_name_pre = IWL2030_FW_PRE, \
- .ucode_api_max = IWL2030_UCODE_API_MAX, \
- .ucode_api_min = IWL2030_UCODE_API_MIN, \
- .eeprom_ver = EEPROM_6035_EEPROM_VERSION, \
- .eeprom_calib_ver = EEPROM_6035_TX_POWER_VERSION, \
- .ops = &iwl2030_ops, \
- .mod_params = &iwlagn_mod_params, \
- .base_params = &iwl2030_base_params, \
- .bt_params = &iwl2030_bt_params, \
- .need_dc_calib = true, \
- .need_temp_offset_calib = true, \
- .led_mode = IWL_LED_RF_STATE, \
- .adv_pm = true \
-
-struct iwl_cfg iwl6035_2agn_cfg = {
- .name = "2000 Series 2x2 AGN/BT",
- IWL_DEVICE_6035,
- .ht_params = &iwl2000_ht_params,
-};
-
-struct iwl_cfg iwl6035_2abg_cfg = {
- .name = "2000 Series 2x2 ABG/BT",
- IWL_DEVICE_6035,
-};
-
-struct iwl_cfg iwl6035_2bg_cfg = {
- .name = "2000 Series 2x2 BG/BT",
- IWL_DEVICE_6035,
-};
-
-#define IWL_DEVICE_200 \
- .fw_name_pre = IWL200_FW_PRE, \
- .ucode_api_max = IWL200_UCODE_API_MAX, \
- .ucode_api_min = IWL200_UCODE_API_MIN, \
+#define IWL_DEVICE_105 \
+ .fw_name_pre = IWL105_FW_PRE, \
+ .ucode_api_max = IWL105_UCODE_API_MAX, \
+ .ucode_api_min = IWL105_UCODE_API_MIN, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
- .ops = &iwl200_ops, \
- .mod_params = &iwlagn_mod_params, \
+ .ops = &iwl105_ops, \
.base_params = &iwl2000_base_params, \
.need_dc_calib = true, \
.need_temp_offset_calib = true, \
@@ -517,25 +428,24 @@
.adv_pm = true, \
.rx_with_siso_diversity = true \
-struct iwl_cfg iwl200_bg_cfg = {
- .name = "200 Series 1x1 BG",
- IWL_DEVICE_200,
+struct iwl_cfg iwl105_bg_cfg = {
+ .name = "105 Series 1x1 BG",
+ IWL_DEVICE_105,
};
-struct iwl_cfg iwl200_bgn_cfg = {
- .name = "200 Series 1x1 BGN",
- IWL_DEVICE_200,
+struct iwl_cfg iwl105_bgn_cfg = {
+ .name = "105 Series 1x1 BGN",
+ IWL_DEVICE_105,
.ht_params = &iwl2000_ht_params,
};
-#define IWL_DEVICE_230 \
- .fw_name_pre = IWL200_FW_PRE, \
- .ucode_api_max = IWL200_UCODE_API_MAX, \
- .ucode_api_min = IWL200_UCODE_API_MIN, \
+#define IWL_DEVICE_135 \
+ .fw_name_pre = IWL105_FW_PRE, \
+ .ucode_api_max = IWL105_UCODE_API_MAX, \
+ .ucode_api_min = IWL105_UCODE_API_MIN, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
- .ops = &iwl230_ops, \
- .mod_params = &iwlagn_mod_params, \
+ .ops = &iwl135_ops, \
.base_params = &iwl2030_base_params, \
.bt_params = &iwl2030_bt_params, \
.need_dc_calib = true, \
@@ -544,17 +454,17 @@
.adv_pm = true, \
.rx_with_siso_diversity = true \
-struct iwl_cfg iwl230_bg_cfg = {
- .name = "200 Series 1x1 BG/BT",
- IWL_DEVICE_230,
+struct iwl_cfg iwl135_bg_cfg = {
+ .name = "105 Series 1x1 BG/BT",
+ IWL_DEVICE_135,
};
-struct iwl_cfg iwl230_bgn_cfg = {
- .name = "200 Series 1x1 BGN/BT",
- IWL_DEVICE_230,
+struct iwl_cfg iwl135_bgn_cfg = {
+ .name = "105 Series 1x1 BGN/BT",
+ IWL_DEVICE_135,
.ht_params = &iwl2000_ht_params,
};
MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_MAX));
-MODULE_FIRMWARE(IWL200_MODULE_FIRMWARE(IWL200_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
index 3975e45..05ad476 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 22e045b..98f81df 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -45,10 +45,8 @@
#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-agn.h"
-#include "iwl-agn-led.h"
#include "iwl-agn-hw.h"
#include "iwl-5000-hw.h"
-#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL5000_UCODE_API_MAX 5
@@ -59,12 +57,10 @@
#define IWL5150_UCODE_API_MIN 1
#define IWL5000_FW_PRE "iwlwifi-5000-"
-#define _IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE #api ".ucode"
-#define IWL5000_MODULE_FIRMWARE(api) _IWL5000_MODULE_FIRMWARE(api)
+#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE #api ".ucode"
#define IWL5150_FW_PRE "iwlwifi-5150-"
-#define _IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE #api ".ucode"
-#define IWL5150_MODULE_FIRMWARE(api) _IWL5150_MODULE_FIRMWARE(api)
+#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE #api ".ucode"
/* NIC configuration for 5000 series */
static void iwl5000_nic_config(struct iwl_priv *priv)
@@ -168,10 +164,10 @@
static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
+ iwlagn_mod_params.num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
@@ -185,7 +181,6 @@
priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
@@ -214,10 +209,10 @@
static int iwl5150_hw_set_hw_params(struct iwl_priv *priv)
{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
+ iwlagn_mod_params.num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
@@ -231,7 +226,6 @@
priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
@@ -263,7 +257,7 @@
u32 vt = 0;
s32 offset = iwl_temp_calib_to_offset(priv);
- vt = le32_to_cpu(priv->_agn.statistics.general.common.temperature);
+ vt = le32_to_cpu(priv->statistics.common.temperature);
vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
/* now vt hold the temperature in Kelvin */
priv->temperature = KELVIN_TO_CELSIUS(vt);
@@ -345,24 +339,13 @@
static struct iwl_lib_ops iwl5000_lib = {
.set_hw_params = iwl5000_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
- .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
- .txq_agg_enable = iwlagn_txq_agg_enable,
- .txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_csr = iwl_dump_csr,
- .dump_fh = iwl_dump_fh,
- .load_ucode = iwlagn_load_ucode,
- .init_alive_start = iwlagn_init_alive_start,
- .alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl5000_hw_channel_switch,
@@ -380,56 +363,24 @@
EEPROM_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
},
- .isr_ops = {
- .isr = iwl_isr_ict,
- .free = iwl_free_isr_ict,
- .alloc = iwl_alloc_isr_ict,
- .reset = iwl_reset_ict,
- .disable = iwl_disable_ict,
- },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
- .tt_ops = {
- .lower_power_detection = iwl_tt_is_low_power_state,
- .tt_power_mode = iwl_tt_current_power_mode,
- .ct_kill_check = iwl_check_for_ct_kill,
- }
};
static struct iwl_lib_ops iwl5150_lib = {
.set_hw_params = iwl5150_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
- .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
- .txq_agg_enable = iwlagn_txq_agg_enable,
- .txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_csr = iwl_dump_csr,
- .load_ucode = iwlagn_load_ucode,
- .init_alive_start = iwlagn_init_alive_start,
- .alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl5000_hw_channel_switch,
@@ -447,51 +398,25 @@
EEPROM_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
},
- .isr_ops = {
- .isr = iwl_isr_ict,
- .free = iwl_free_isr_ict,
- .alloc = iwl_alloc_isr_ict,
- .reset = iwl_reset_ict,
- .disable = iwl_disable_ict,
- },
.temp_ops = {
.temperature = iwl5150_temperature,
},
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
- .tt_ops = {
- .lower_power_detection = iwl_tt_is_low_power_state,
- .tt_power_mode = iwl_tt_current_power_mode,
- .ct_kill_check = iwl_check_for_ct_kill,
- }
};
static const struct iwl_ops iwl5000_ops = {
.lib = &iwl5000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl5150_ops = {
.lib = &iwl5150_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static struct iwl_base_params iwl5000_base_params = {
@@ -499,17 +424,12 @@
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
- .set_l0s = true,
- .use_bsm = false,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
};
static struct iwl_ht_params iwl5000_ht_params = {
.ht_greenfield_support = true,
@@ -523,7 +443,6 @@
.eeprom_ver = EEPROM_5000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
.ops = &iwl5000_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl5000_base_params, \
.led_mode = IWL_LED_BLINK
@@ -567,7 +486,6 @@
.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
.ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
@@ -581,7 +499,6 @@
.eeprom_ver = EEPROM_5050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \
.ops = &iwl5150_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl5000_base_params, \
.need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000-hw.h b/drivers/net/wireless/iwlwifi/iwl-6000-hw.h
index 47891e1..b27986e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-6000-hw.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index a745b01..a7921f9a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -46,8 +46,6 @@
#include "iwl-helpers.h"
#include "iwl-agn-hw.h"
#include "iwl-6000-hw.h"
-#include "iwl-agn-led.h"
-#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
@@ -60,20 +58,16 @@
#define IWL6000G2_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
-#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
-#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
+#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6050_FW_PRE "iwlwifi-6050-"
-#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
-#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
+#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6005_FW_PRE "iwlwifi-6000g2a-"
-#define _IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE #api ".ucode"
-#define IWL6005_MODULE_FIRMWARE(api) _IWL6005_MODULE_FIRMWARE(api)
+#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE #api ".ucode"
#define IWL6030_FW_PRE "iwlwifi-6000g2b-"
-#define _IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE #api ".ucode"
-#define IWL6030_MODULE_FIRMWARE(api) _IWL6030_MODULE_FIRMWARE(api)
+#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE #api ".ucode"
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
@@ -85,7 +79,7 @@
static void iwl6050_additional_nic_config(struct iwl_priv *priv)
{
/* Indicate calibration version to uCode. */
- if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
+ if (iwlagn_eeprom_calib_version(priv) >= 6)
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
}
@@ -93,7 +87,7 @@
static void iwl6150_additional_nic_config(struct iwl_priv *priv)
{
/* Indicate calibration version to uCode. */
- if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
+ if (iwlagn_eeprom_calib_version(priv) >= 6)
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
@@ -159,10 +153,10 @@
static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
+ iwlagn_mod_params.num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
@@ -176,7 +170,6 @@
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
@@ -285,24 +278,13 @@
static struct iwl_lib_ops iwl6000_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
- .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
- .txq_agg_enable = iwlagn_txq_agg_enable,
- .txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
- .load_ucode = iwlagn_load_ucode,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_csr = iwl_dump_csr,
- .dump_fh = iwl_dump_fh,
- .init_alive_start = iwlagn_init_alive_start,
- .alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
@@ -320,45 +302,19 @@
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
- .isr_ops = {
- .isr = iwl_isr_ict,
- .free = iwl_free_isr_ict,
- .alloc = iwl_alloc_isr_ict,
- .reset = iwl_reset_ict,
- .disable = iwl_disable_ict,
- },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
- .tt_ops = {
- .lower_power_detection = iwl_tt_is_low_power_state,
- .tt_power_mode = iwl_tt_current_power_mode,
- .ct_kill_check = iwl_check_for_ct_kill,
- }
};
static struct iwl_lib_ops iwl6030_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
- .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
- .txq_agg_enable = iwlagn_txq_agg_enable,
- .txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
@@ -366,13 +322,6 @@
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
- .load_ucode = iwlagn_load_ucode,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_csr = iwl_dump_csr,
- .dump_fh = iwl_dump_fh,
- .init_alive_start = iwlagn_init_alive_start,
- .alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
@@ -390,36 +339,14 @@
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
- .isr_ops = {
- .isr = iwl_isr_ict,
- .free = iwl_free_isr_ict,
- .alloc = iwl_alloc_isr_ict,
- .reset = iwl_reset_ict,
- .disable = iwl_disable_ict,
- },
.temp_ops = {
.temperature = iwlagn_temperature,
},
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
- .tt_ops = {
- .lower_power_detection = iwl_tt_is_low_power_state,
- .tt_power_mode = iwl_tt_current_power_mode,
- .ct_kill_check = iwl_check_for_ct_kill,
- }
};
static struct iwl_nic_ops iwl6050_nic_ops = {
@@ -434,34 +361,26 @@
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl6050_ops = {
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
.nic = &iwl6050_nic_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl6150_ops = {
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
.nic = &iwl6150_nic_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static const struct iwl_ops iwl6030_ops = {
.lib = &iwl6030_lib,
.hcmd = &iwlagn_bt_hcmd,
.utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
- .ieee80211_ops = &iwlagn_hw_ops,
};
static struct iwl_base_params iwl6000_base_params = {
@@ -469,8 +388,6 @@
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
@@ -481,9 +398,6 @@
.chain_noise_scale = 1000,
.wd_timeout = IWL_DEF_WD_TIMEOUT,
.max_event_log_size = 512,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
.shadow_reg_enable = true,
};
@@ -492,8 +406,6 @@
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.led_compensation = 51,
@@ -504,9 +416,6 @@
.chain_noise_scale = 1500,
.wd_timeout = IWL_DEF_WD_TIMEOUT,
.max_event_log_size = 1024,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
.shadow_reg_enable = true,
};
static struct iwl_base_params iwl6000_g2_base_params = {
@@ -514,8 +423,6 @@
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 57,
@@ -526,9 +433,6 @@
.chain_noise_scale = 1000,
.wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
.shadow_reg_enable = true,
};
@@ -538,7 +442,6 @@
};
static struct iwl_bt_params iwl6000_bt_params = {
- .bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.advanced_bt_coexist = true,
.agg_time_limit = BT_AGG_THRESHOLD_DEF,
@@ -554,7 +457,6 @@
.eeprom_ver = EEPROM_6005_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \
.ops = &iwl6000_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl6000_g2_base_params, \
.need_dc_calib = true, \
.need_temp_offset_calib = true, \
@@ -583,7 +485,6 @@
.eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
.ops = &iwl6030_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
.need_dc_calib = true, \
@@ -613,6 +514,22 @@
IWL_DEVICE_6030,
};
+struct iwl_cfg iwl6035_2agn_cfg = {
+ .name = "6035 Series 2x2 AGN/BT",
+ IWL_DEVICE_6030,
+ .ht_params = &iwl6000_ht_params,
+};
+
+struct iwl_cfg iwl6035_2abg_cfg = {
+ .name = "6035 Series 2x2 ABG/BT",
+ IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl6035_2bg_cfg = {
+ .name = "6035 Series 2x2 BG/BT",
+ IWL_DEVICE_6030,
+};
+
struct iwl_cfg iwl1030_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
IWL_DEVICE_6030,
@@ -649,7 +566,6 @@
.eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
.ops = &iwl6000_ops, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl6000_base_params, \
.pa_type = IWL_PA_INTERNAL, \
.led_mode = IWL_LED_BLINK
@@ -679,7 +595,6 @@
.ops = &iwl6050_ops, \
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
- .mod_params = &iwlagn_mod_params, \
.base_params = &iwl6050_base_params, \
.need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
@@ -704,7 +619,6 @@
.eeprom_ver = EEPROM_6150_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
.ops = &iwl6150_ops,
- .mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
@@ -720,7 +634,6 @@
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index 9006293..0f6bb9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -605,7 +605,7 @@
IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret);
}
-void iwl_sensitivity_calibration(struct iwl_priv *priv, void *resp)
+void iwl_sensitivity_calibration(struct iwl_priv *priv)
{
u32 rx_enable_time;
u32 fa_cck;
@@ -631,16 +631,9 @@
}
spin_lock_irqsave(&priv->lock, flags);
- if (iwl_bt_statistics(priv)) {
- rx_info = &(((struct iwl_bt_notif_statistics *)resp)->
- rx.general.common);
- ofdm = &(((struct iwl_bt_notif_statistics *)resp)->rx.ofdm);
- cck = &(((struct iwl_bt_notif_statistics *)resp)->rx.cck);
- } else {
- rx_info = &(((struct iwl_notif_statistics *)resp)->rx.general);
- ofdm = &(((struct iwl_notif_statistics *)resp)->rx.ofdm);
- cck = &(((struct iwl_notif_statistics *)resp)->rx.cck);
- }
+ rx_info = &priv->statistics.rx_non_phy;
+ ofdm = &priv->statistics.rx_ofdm;
+ cck = &priv->statistics.rx_cck;
if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
IWL_DEBUG_CALIB(priv, "<< invalid data.\n");
spin_unlock_irqrestore(&priv->lock, flags);
@@ -851,7 +844,7 @@
* 1) Which antennas are connected.
* 2) Differential rx gain settings to balance the 3 receivers.
*/
-void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
+void iwl_chain_noise_calibration(struct iwl_priv *priv)
{
struct iwl_chain_noise_data *data = NULL;
@@ -896,13 +889,9 @@
}
spin_lock_irqsave(&priv->lock, flags);
- if (iwl_bt_statistics(priv)) {
- rx_info = &(((struct iwl_bt_notif_statistics *)stat_resp)->
- rx.general.common);
- } else {
- rx_info = &(((struct iwl_notif_statistics *)stat_resp)->
- rx.general);
- }
+
+ rx_info = &priv->statistics.rx_non_phy;
+
if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n");
spin_unlock_irqrestore(&priv->lock, flags);
@@ -911,19 +900,9 @@
rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
rxon_chnum = le16_to_cpu(ctx->staging.channel);
- if (iwl_bt_statistics(priv)) {
- stat_band24 = !!(((struct iwl_bt_notif_statistics *)
- stat_resp)->flag &
- STATISTICS_REPLY_FLG_BAND_24G_MSK);
- stat_chnum = le32_to_cpu(((struct iwl_bt_notif_statistics *)
- stat_resp)->flag) >> 16;
- } else {
- stat_band24 = !!(((struct iwl_notif_statistics *)
- stat_resp)->flag &
- STATISTICS_REPLY_FLG_BAND_24G_MSK);
- stat_chnum = le32_to_cpu(((struct iwl_notif_statistics *)
- stat_resp)->flag) >> 16;
- }
+ stat_band24 =
+ !!(priv->statistics.flag & STATISTICS_REPLY_FLG_BAND_24G_MSK);
+ stat_chnum = le32_to_cpu(priv->statistics.flag) >> 16;
/* Make sure we accumulate data for just the associated channel
* (even if scanning). */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.h b/drivers/net/wireless/iwlwifi/iwl-agn-calib.h
index e37ae726..4ef4dd9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -66,8 +66,8 @@
#include "iwl-core.h"
#include "iwl-commands.h"
-void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp);
-void iwl_sensitivity_calibration(struct iwl_priv *priv, void *resp);
+void iwl_chain_noise_calibration(struct iwl_priv *priv);
+void iwl_sensitivity_calibration(struct iwl_priv *priv);
void iwl_init_sensitivity(struct iwl_priv *priv);
void iwl_reset_run_time_calib(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
deleted file mode 100644
index b500aaa..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
+++ /dev/null
@@ -1,1073 +0,0 @@
-/******************************************************************************
-*
-* GPL LICENSE SUMMARY
-*
-* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of version 2 of the GNU General Public License as
-* published by the Free Software Foundation.
-*
-* This program is distributed in the hope that it will be useful, but
-* WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-* General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
-* USA
-*
-* The full GNU General Public License is included in this distribution
-* in the file called LICENSE.GPL.
-*
-* Contact Information:
-* Intel Linux Wireless <ilw@linux.intel.com>
-* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-*****************************************************************************/
-#include "iwl-agn.h"
-#include "iwl-agn-debugfs.h"
-
-static const char *fmt_value = " %-30s %10u\n";
-static const char *fmt_hex = " %-30s 0x%02X\n";
-static const char *fmt_table = " %-30s %10u %10u %10u %10u\n";
-static const char *fmt_header =
- "%-32s current cumulative delta max\n";
-
-static int iwl_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
-{
- int p = 0;
- u32 flag;
-
- if (iwl_bt_statistics(priv))
- flag = le32_to_cpu(priv->_agn.statistics_bt.flag);
- else
- flag = le32_to_cpu(priv->_agn.statistics.flag);
-
- p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n", flag);
- if (flag & UCODE_STATISTICS_CLEAR_MSK)
- p += scnprintf(buf + p, bufsz - p,
- "\tStatistics have been cleared\n");
- p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n",
- (flag & UCODE_STATISTICS_FREQUENCY_MSK)
- ? "2.4 GHz" : "5.2 GHz");
- p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n",
- (flag & UCODE_STATISTICS_NARROW_BAND_MSK)
- ? "enabled" : "disabled");
-
- return p;
-}
-
-ssize_t iwl_ucode_rx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
- {
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = sizeof(struct statistics_rx_phy) * 40 +
- sizeof(struct statistics_rx_non_phy) * 40 +
- sizeof(struct statistics_rx_ht_phy) * 40 + 400;
- ssize_t ret;
- struct statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
- struct statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
- struct statistics_rx_non_phy *general, *accum_general;
- struct statistics_rx_non_phy *delta_general, *max_general;
- struct statistics_rx_ht_phy *ht, *accum_ht, *delta_ht, *max_ht;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * the statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- if (iwl_bt_statistics(priv)) {
- ofdm = &priv->_agn.statistics_bt.rx.ofdm;
- cck = &priv->_agn.statistics_bt.rx.cck;
- general = &priv->_agn.statistics_bt.rx.general.common;
- ht = &priv->_agn.statistics_bt.rx.ofdm_ht;
- accum_ofdm = &priv->_agn.accum_statistics_bt.rx.ofdm;
- accum_cck = &priv->_agn.accum_statistics_bt.rx.cck;
- accum_general =
- &priv->_agn.accum_statistics_bt.rx.general.common;
- accum_ht = &priv->_agn.accum_statistics_bt.rx.ofdm_ht;
- delta_ofdm = &priv->_agn.delta_statistics_bt.rx.ofdm;
- delta_cck = &priv->_agn.delta_statistics_bt.rx.cck;
- delta_general =
- &priv->_agn.delta_statistics_bt.rx.general.common;
- delta_ht = &priv->_agn.delta_statistics_bt.rx.ofdm_ht;
- max_ofdm = &priv->_agn.max_delta_bt.rx.ofdm;
- max_cck = &priv->_agn.max_delta_bt.rx.cck;
- max_general = &priv->_agn.max_delta_bt.rx.general.common;
- max_ht = &priv->_agn.max_delta_bt.rx.ofdm_ht;
- } else {
- ofdm = &priv->_agn.statistics.rx.ofdm;
- cck = &priv->_agn.statistics.rx.cck;
- general = &priv->_agn.statistics.rx.general;
- ht = &priv->_agn.statistics.rx.ofdm_ht;
- accum_ofdm = &priv->_agn.accum_statistics.rx.ofdm;
- accum_cck = &priv->_agn.accum_statistics.rx.cck;
- accum_general = &priv->_agn.accum_statistics.rx.general;
- accum_ht = &priv->_agn.accum_statistics.rx.ofdm_ht;
- delta_ofdm = &priv->_agn.delta_statistics.rx.ofdm;
- delta_cck = &priv->_agn.delta_statistics.rx.cck;
- delta_general = &priv->_agn.delta_statistics.rx.general;
- delta_ht = &priv->_agn.delta_statistics.rx.ofdm_ht;
- max_ofdm = &priv->_agn.max_delta.rx.ofdm;
- max_cck = &priv->_agn.max_delta.rx.cck;
- max_general = &priv->_agn.max_delta.rx.general;
- max_ht = &priv->_agn.max_delta.rx.ofdm_ht;
- }
-
- pos += iwl_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_header, "Statistics_Rx - OFDM:");
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "ina_cnt:",
- le32_to_cpu(ofdm->ina_cnt),
- accum_ofdm->ina_cnt,
- delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "fina_cnt:",
- le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
- delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "plcp_err:",
- le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
- delta_ofdm->plcp_err, max_ofdm->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "crc32_err:",
- le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
- delta_ofdm->crc32_err, max_ofdm->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "overrun_err:",
- le32_to_cpu(ofdm->overrun_err),
- accum_ofdm->overrun_err, delta_ofdm->overrun_err,
- max_ofdm->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "early_overrun_err:",
- le32_to_cpu(ofdm->early_overrun_err),
- accum_ofdm->early_overrun_err,
- delta_ofdm->early_overrun_err,
- max_ofdm->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "crc32_good:",
- le32_to_cpu(ofdm->crc32_good),
- accum_ofdm->crc32_good, delta_ofdm->crc32_good,
- max_ofdm->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "false_alarm_cnt:",
- le32_to_cpu(ofdm->false_alarm_cnt),
- accum_ofdm->false_alarm_cnt,
- delta_ofdm->false_alarm_cnt,
- max_ofdm->false_alarm_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "fina_sync_err_cnt:",
- le32_to_cpu(ofdm->fina_sync_err_cnt),
- accum_ofdm->fina_sync_err_cnt,
- delta_ofdm->fina_sync_err_cnt,
- max_ofdm->fina_sync_err_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sfd_timeout:",
- le32_to_cpu(ofdm->sfd_timeout),
- accum_ofdm->sfd_timeout, delta_ofdm->sfd_timeout,
- max_ofdm->sfd_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "fina_timeout:",
- le32_to_cpu(ofdm->fina_timeout),
- accum_ofdm->fina_timeout, delta_ofdm->fina_timeout,
- max_ofdm->fina_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "unresponded_rts:",
- le32_to_cpu(ofdm->unresponded_rts),
- accum_ofdm->unresponded_rts,
- delta_ofdm->unresponded_rts,
- max_ofdm->unresponded_rts);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "rxe_frame_lmt_ovrun:",
- le32_to_cpu(ofdm->rxe_frame_limit_overrun),
- accum_ofdm->rxe_frame_limit_overrun,
- delta_ofdm->rxe_frame_limit_overrun,
- max_ofdm->rxe_frame_limit_overrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sent_ack_cnt:",
- le32_to_cpu(ofdm->sent_ack_cnt),
- accum_ofdm->sent_ack_cnt, delta_ofdm->sent_ack_cnt,
- max_ofdm->sent_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sent_cts_cnt:",
- le32_to_cpu(ofdm->sent_cts_cnt),
- accum_ofdm->sent_cts_cnt, delta_ofdm->sent_cts_cnt,
- max_ofdm->sent_cts_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sent_ba_rsp_cnt:",
- le32_to_cpu(ofdm->sent_ba_rsp_cnt),
- accum_ofdm->sent_ba_rsp_cnt,
- delta_ofdm->sent_ba_rsp_cnt,
- max_ofdm->sent_ba_rsp_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "dsp_self_kill:",
- le32_to_cpu(ofdm->dsp_self_kill),
- accum_ofdm->dsp_self_kill,
- delta_ofdm->dsp_self_kill,
- max_ofdm->dsp_self_kill);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "mh_format_err:",
- le32_to_cpu(ofdm->mh_format_err),
- accum_ofdm->mh_format_err,
- delta_ofdm->mh_format_err,
- max_ofdm->mh_format_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "re_acq_main_rssi_sum:",
- le32_to_cpu(ofdm->re_acq_main_rssi_sum),
- accum_ofdm->re_acq_main_rssi_sum,
- delta_ofdm->re_acq_main_rssi_sum,
- max_ofdm->re_acq_main_rssi_sum);
-
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_header, "Statistics_Rx - CCK:");
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "ina_cnt:",
- le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
- delta_cck->ina_cnt, max_cck->ina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "fina_cnt:",
- le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
- delta_cck->fina_cnt, max_cck->fina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "plcp_err:",
- le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
- delta_cck->plcp_err, max_cck->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "crc32_err:",
- le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
- delta_cck->crc32_err, max_cck->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "overrun_err:",
- le32_to_cpu(cck->overrun_err),
- accum_cck->overrun_err, delta_cck->overrun_err,
- max_cck->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "early_overrun_err:",
- le32_to_cpu(cck->early_overrun_err),
- accum_cck->early_overrun_err,
- delta_cck->early_overrun_err,
- max_cck->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "crc32_good:",
- le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
- delta_cck->crc32_good, max_cck->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "false_alarm_cnt:",
- le32_to_cpu(cck->false_alarm_cnt),
- accum_cck->false_alarm_cnt,
- delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "fina_sync_err_cnt:",
- le32_to_cpu(cck->fina_sync_err_cnt),
- accum_cck->fina_sync_err_cnt,
- delta_cck->fina_sync_err_cnt,
- max_cck->fina_sync_err_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sfd_timeout:",
- le32_to_cpu(cck->sfd_timeout),
- accum_cck->sfd_timeout, delta_cck->sfd_timeout,
- max_cck->sfd_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "fina_timeout:",
- le32_to_cpu(cck->fina_timeout),
- accum_cck->fina_timeout, delta_cck->fina_timeout,
- max_cck->fina_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "unresponded_rts:",
- le32_to_cpu(cck->unresponded_rts),
- accum_cck->unresponded_rts, delta_cck->unresponded_rts,
- max_cck->unresponded_rts);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "rxe_frame_lmt_ovrun:",
- le32_to_cpu(cck->rxe_frame_limit_overrun),
- accum_cck->rxe_frame_limit_overrun,
- delta_cck->rxe_frame_limit_overrun,
- max_cck->rxe_frame_limit_overrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sent_ack_cnt:",
- le32_to_cpu(cck->sent_ack_cnt),
- accum_cck->sent_ack_cnt, delta_cck->sent_ack_cnt,
- max_cck->sent_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sent_cts_cnt:",
- le32_to_cpu(cck->sent_cts_cnt),
- accum_cck->sent_cts_cnt, delta_cck->sent_cts_cnt,
- max_cck->sent_cts_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sent_ba_rsp_cnt:",
- le32_to_cpu(cck->sent_ba_rsp_cnt),
- accum_cck->sent_ba_rsp_cnt,
- delta_cck->sent_ba_rsp_cnt,
- max_cck->sent_ba_rsp_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "dsp_self_kill:",
- le32_to_cpu(cck->dsp_self_kill),
- accum_cck->dsp_self_kill, delta_cck->dsp_self_kill,
- max_cck->dsp_self_kill);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "mh_format_err:",
- le32_to_cpu(cck->mh_format_err),
- accum_cck->mh_format_err, delta_cck->mh_format_err,
- max_cck->mh_format_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "re_acq_main_rssi_sum:",
- le32_to_cpu(cck->re_acq_main_rssi_sum),
- accum_cck->re_acq_main_rssi_sum,
- delta_cck->re_acq_main_rssi_sum,
- max_cck->re_acq_main_rssi_sum);
-
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_header, "Statistics_Rx - GENERAL:");
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "bogus_cts:",
- le32_to_cpu(general->bogus_cts),
- accum_general->bogus_cts, delta_general->bogus_cts,
- max_general->bogus_cts);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "bogus_ack:",
- le32_to_cpu(general->bogus_ack),
- accum_general->bogus_ack, delta_general->bogus_ack,
- max_general->bogus_ack);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "non_bssid_frames:",
- le32_to_cpu(general->non_bssid_frames),
- accum_general->non_bssid_frames,
- delta_general->non_bssid_frames,
- max_general->non_bssid_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "filtered_frames:",
- le32_to_cpu(general->filtered_frames),
- accum_general->filtered_frames,
- delta_general->filtered_frames,
- max_general->filtered_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "non_channel_beacons:",
- le32_to_cpu(general->non_channel_beacons),
- accum_general->non_channel_beacons,
- delta_general->non_channel_beacons,
- max_general->non_channel_beacons);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "channel_beacons:",
- le32_to_cpu(general->channel_beacons),
- accum_general->channel_beacons,
- delta_general->channel_beacons,
- max_general->channel_beacons);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "num_missed_bcon:",
- le32_to_cpu(general->num_missed_bcon),
- accum_general->num_missed_bcon,
- delta_general->num_missed_bcon,
- max_general->num_missed_bcon);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "adc_rx_saturation_time:",
- le32_to_cpu(general->adc_rx_saturation_time),
- accum_general->adc_rx_saturation_time,
- delta_general->adc_rx_saturation_time,
- max_general->adc_rx_saturation_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "ina_detect_search_tm:",
- le32_to_cpu(general->ina_detection_search_time),
- accum_general->ina_detection_search_time,
- delta_general->ina_detection_search_time,
- max_general->ina_detection_search_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_silence_rssi_a:",
- le32_to_cpu(general->beacon_silence_rssi_a),
- accum_general->beacon_silence_rssi_a,
- delta_general->beacon_silence_rssi_a,
- max_general->beacon_silence_rssi_a);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_silence_rssi_b:",
- le32_to_cpu(general->beacon_silence_rssi_b),
- accum_general->beacon_silence_rssi_b,
- delta_general->beacon_silence_rssi_b,
- max_general->beacon_silence_rssi_b);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_silence_rssi_c:",
- le32_to_cpu(general->beacon_silence_rssi_c),
- accum_general->beacon_silence_rssi_c,
- delta_general->beacon_silence_rssi_c,
- max_general->beacon_silence_rssi_c);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "interference_data_flag:",
- le32_to_cpu(general->interference_data_flag),
- accum_general->interference_data_flag,
- delta_general->interference_data_flag,
- max_general->interference_data_flag);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "channel_load:",
- le32_to_cpu(general->channel_load),
- accum_general->channel_load,
- delta_general->channel_load,
- max_general->channel_load);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "dsp_false_alarms:",
- le32_to_cpu(general->dsp_false_alarms),
- accum_general->dsp_false_alarms,
- delta_general->dsp_false_alarms,
- max_general->dsp_false_alarms);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_rssi_a:",
- le32_to_cpu(general->beacon_rssi_a),
- accum_general->beacon_rssi_a,
- delta_general->beacon_rssi_a,
- max_general->beacon_rssi_a);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_rssi_b:",
- le32_to_cpu(general->beacon_rssi_b),
- accum_general->beacon_rssi_b,
- delta_general->beacon_rssi_b,
- max_general->beacon_rssi_b);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_rssi_c:",
- le32_to_cpu(general->beacon_rssi_c),
- accum_general->beacon_rssi_c,
- delta_general->beacon_rssi_c,
- max_general->beacon_rssi_c);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_energy_a:",
- le32_to_cpu(general->beacon_energy_a),
- accum_general->beacon_energy_a,
- delta_general->beacon_energy_a,
- max_general->beacon_energy_a);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_energy_b:",
- le32_to_cpu(general->beacon_energy_b),
- accum_general->beacon_energy_b,
- delta_general->beacon_energy_b,
- max_general->beacon_energy_b);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "beacon_energy_c:",
- le32_to_cpu(general->beacon_energy_c),
- accum_general->beacon_energy_c,
- delta_general->beacon_energy_c,
- max_general->beacon_energy_c);
-
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_header, "Statistics_Rx - OFDM_HT:");
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "plcp_err:",
- le32_to_cpu(ht->plcp_err), accum_ht->plcp_err,
- delta_ht->plcp_err, max_ht->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "overrun_err:",
- le32_to_cpu(ht->overrun_err), accum_ht->overrun_err,
- delta_ht->overrun_err, max_ht->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "early_overrun_err:",
- le32_to_cpu(ht->early_overrun_err),
- accum_ht->early_overrun_err,
- delta_ht->early_overrun_err,
- max_ht->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "crc32_good:",
- le32_to_cpu(ht->crc32_good), accum_ht->crc32_good,
- delta_ht->crc32_good, max_ht->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "crc32_err:",
- le32_to_cpu(ht->crc32_err), accum_ht->crc32_err,
- delta_ht->crc32_err, max_ht->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "mh_format_err:",
- le32_to_cpu(ht->mh_format_err),
- accum_ht->mh_format_err,
- delta_ht->mh_format_err, max_ht->mh_format_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg_crc32_good:",
- le32_to_cpu(ht->agg_crc32_good),
- accum_ht->agg_crc32_good,
- delta_ht->agg_crc32_good, max_ht->agg_crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg_mpdu_cnt:",
- le32_to_cpu(ht->agg_mpdu_cnt),
- accum_ht->agg_mpdu_cnt,
- delta_ht->agg_mpdu_cnt, max_ht->agg_mpdu_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg_cnt:",
- le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt,
- delta_ht->agg_cnt, max_ht->agg_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "unsupport_mcs:",
- le32_to_cpu(ht->unsupport_mcs),
- accum_ht->unsupport_mcs,
- delta_ht->unsupport_mcs, max_ht->unsupport_mcs);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl_ucode_tx_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = (sizeof(struct statistics_tx) * 48) + 250;
- ssize_t ret;
- struct statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /* the statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- if (iwl_bt_statistics(priv)) {
- tx = &priv->_agn.statistics_bt.tx;
- accum_tx = &priv->_agn.accum_statistics_bt.tx;
- delta_tx = &priv->_agn.delta_statistics_bt.tx;
- max_tx = &priv->_agn.max_delta_bt.tx;
- } else {
- tx = &priv->_agn.statistics.tx;
- accum_tx = &priv->_agn.accum_statistics.tx;
- delta_tx = &priv->_agn.delta_statistics.tx;
- max_tx = &priv->_agn.max_delta.tx;
- }
-
- pos += iwl_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_header, "Statistics_Tx:");
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "preamble:",
- le32_to_cpu(tx->preamble_cnt),
- accum_tx->preamble_cnt,
- delta_tx->preamble_cnt, max_tx->preamble_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "rx_detected_cnt:",
- le32_to_cpu(tx->rx_detected_cnt),
- accum_tx->rx_detected_cnt,
- delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "bt_prio_defer_cnt:",
- le32_to_cpu(tx->bt_prio_defer_cnt),
- accum_tx->bt_prio_defer_cnt,
- delta_tx->bt_prio_defer_cnt,
- max_tx->bt_prio_defer_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "bt_prio_kill_cnt:",
- le32_to_cpu(tx->bt_prio_kill_cnt),
- accum_tx->bt_prio_kill_cnt,
- delta_tx->bt_prio_kill_cnt,
- max_tx->bt_prio_kill_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "few_bytes_cnt:",
- le32_to_cpu(tx->few_bytes_cnt),
- accum_tx->few_bytes_cnt,
- delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "cts_timeout:",
- le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
- delta_tx->cts_timeout, max_tx->cts_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "ack_timeout:",
- le32_to_cpu(tx->ack_timeout),
- accum_tx->ack_timeout,
- delta_tx->ack_timeout, max_tx->ack_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "expected_ack_cnt:",
- le32_to_cpu(tx->expected_ack_cnt),
- accum_tx->expected_ack_cnt,
- delta_tx->expected_ack_cnt,
- max_tx->expected_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "actual_ack_cnt:",
- le32_to_cpu(tx->actual_ack_cnt),
- accum_tx->actual_ack_cnt,
- delta_tx->actual_ack_cnt,
- max_tx->actual_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "dump_msdu_cnt:",
- le32_to_cpu(tx->dump_msdu_cnt),
- accum_tx->dump_msdu_cnt,
- delta_tx->dump_msdu_cnt,
- max_tx->dump_msdu_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "abort_nxt_frame_mismatch:",
- le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt),
- accum_tx->burst_abort_next_frame_mismatch_cnt,
- delta_tx->burst_abort_next_frame_mismatch_cnt,
- max_tx->burst_abort_next_frame_mismatch_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "abort_missing_nxt_frame:",
- le32_to_cpu(tx->burst_abort_missing_next_frame_cnt),
- accum_tx->burst_abort_missing_next_frame_cnt,
- delta_tx->burst_abort_missing_next_frame_cnt,
- max_tx->burst_abort_missing_next_frame_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "cts_timeout_collision:",
- le32_to_cpu(tx->cts_timeout_collision),
- accum_tx->cts_timeout_collision,
- delta_tx->cts_timeout_collision,
- max_tx->cts_timeout_collision);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "ack_ba_timeout_collision:",
- le32_to_cpu(tx->ack_or_ba_timeout_collision),
- accum_tx->ack_or_ba_timeout_collision,
- delta_tx->ack_or_ba_timeout_collision,
- max_tx->ack_or_ba_timeout_collision);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg ba_timeout:",
- le32_to_cpu(tx->agg.ba_timeout),
- accum_tx->agg.ba_timeout,
- delta_tx->agg.ba_timeout,
- max_tx->agg.ba_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg ba_resched_frames:",
- le32_to_cpu(tx->agg.ba_reschedule_frames),
- accum_tx->agg.ba_reschedule_frames,
- delta_tx->agg.ba_reschedule_frames,
- max_tx->agg.ba_reschedule_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg scd_query_agg_frame:",
- le32_to_cpu(tx->agg.scd_query_agg_frame_cnt),
- accum_tx->agg.scd_query_agg_frame_cnt,
- delta_tx->agg.scd_query_agg_frame_cnt,
- max_tx->agg.scd_query_agg_frame_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg scd_query_no_agg:",
- le32_to_cpu(tx->agg.scd_query_no_agg),
- accum_tx->agg.scd_query_no_agg,
- delta_tx->agg.scd_query_no_agg,
- max_tx->agg.scd_query_no_agg);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg scd_query_agg:",
- le32_to_cpu(tx->agg.scd_query_agg),
- accum_tx->agg.scd_query_agg,
- delta_tx->agg.scd_query_agg,
- max_tx->agg.scd_query_agg);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg scd_query_mismatch:",
- le32_to_cpu(tx->agg.scd_query_mismatch),
- accum_tx->agg.scd_query_mismatch,
- delta_tx->agg.scd_query_mismatch,
- max_tx->agg.scd_query_mismatch);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg frame_not_ready:",
- le32_to_cpu(tx->agg.frame_not_ready),
- accum_tx->agg.frame_not_ready,
- delta_tx->agg.frame_not_ready,
- max_tx->agg.frame_not_ready);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg underrun:",
- le32_to_cpu(tx->agg.underrun),
- accum_tx->agg.underrun,
- delta_tx->agg.underrun, max_tx->agg.underrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg bt_prio_kill:",
- le32_to_cpu(tx->agg.bt_prio_kill),
- accum_tx->agg.bt_prio_kill,
- delta_tx->agg.bt_prio_kill,
- max_tx->agg.bt_prio_kill);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "agg rx_ba_rsp_cnt:",
- le32_to_cpu(tx->agg.rx_ba_rsp_cnt),
- accum_tx->agg.rx_ba_rsp_cnt,
- delta_tx->agg.rx_ba_rsp_cnt,
- max_tx->agg.rx_ba_rsp_cnt);
-
- if (tx->tx_power.ant_a || tx->tx_power.ant_b || tx->tx_power.ant_c) {
- pos += scnprintf(buf + pos, bufsz - pos,
- "tx power: (1/2 dB step)\n");
- if ((priv->cfg->valid_tx_ant & ANT_A) && tx->tx_power.ant_a)
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_hex, "antenna A:",
- tx->tx_power.ant_a);
- if ((priv->cfg->valid_tx_ant & ANT_B) && tx->tx_power.ant_b)
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_hex, "antenna B:",
- tx->tx_power.ant_b);
- if ((priv->cfg->valid_tx_ant & ANT_C) && tx->tx_power.ant_c)
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_hex, "antenna C:",
- tx->tx_power.ant_c);
- }
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl_ucode_general_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = sizeof(struct statistics_general) * 10 + 300;
- ssize_t ret;
- struct statistics_general_common *general, *accum_general;
- struct statistics_general_common *delta_general, *max_general;
- struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
- struct statistics_div *div, *accum_div, *delta_div, *max_div;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /* the statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- if (iwl_bt_statistics(priv)) {
- general = &priv->_agn.statistics_bt.general.common;
- dbg = &priv->_agn.statistics_bt.general.common.dbg;
- div = &priv->_agn.statistics_bt.general.common.div;
- accum_general = &priv->_agn.accum_statistics_bt.general.common;
- accum_dbg = &priv->_agn.accum_statistics_bt.general.common.dbg;
- accum_div = &priv->_agn.accum_statistics_bt.general.common.div;
- delta_general = &priv->_agn.delta_statistics_bt.general.common;
- max_general = &priv->_agn.max_delta_bt.general.common;
- delta_dbg = &priv->_agn.delta_statistics_bt.general.common.dbg;
- max_dbg = &priv->_agn.max_delta_bt.general.common.dbg;
- delta_div = &priv->_agn.delta_statistics_bt.general.common.div;
- max_div = &priv->_agn.max_delta_bt.general.common.div;
- } else {
- general = &priv->_agn.statistics.general.common;
- dbg = &priv->_agn.statistics.general.common.dbg;
- div = &priv->_agn.statistics.general.common.div;
- accum_general = &priv->_agn.accum_statistics.general.common;
- accum_dbg = &priv->_agn.accum_statistics.general.common.dbg;
- accum_div = &priv->_agn.accum_statistics.general.common.div;
- delta_general = &priv->_agn.delta_statistics.general.common;
- max_general = &priv->_agn.max_delta.general.common;
- delta_dbg = &priv->_agn.delta_statistics.general.common.dbg;
- max_dbg = &priv->_agn.max_delta.general.common.dbg;
- delta_div = &priv->_agn.delta_statistics.general.common.div;
- max_div = &priv->_agn.max_delta.general.common.div;
- }
-
- pos += iwl_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_header, "Statistics_General:");
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_value, "temperature:",
- le32_to_cpu(general->temperature));
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_value, "temperature_m:",
- le32_to_cpu(general->temperature_m));
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_value, "ttl_timestamp:",
- le32_to_cpu(general->ttl_timestamp));
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "burst_check:",
- le32_to_cpu(dbg->burst_check),
- accum_dbg->burst_check,
- delta_dbg->burst_check, max_dbg->burst_check);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "burst_count:",
- le32_to_cpu(dbg->burst_count),
- accum_dbg->burst_count,
- delta_dbg->burst_count, max_dbg->burst_count);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "wait_for_silence_timeout_count:",
- le32_to_cpu(dbg->wait_for_silence_timeout_cnt),
- accum_dbg->wait_for_silence_timeout_cnt,
- delta_dbg->wait_for_silence_timeout_cnt,
- max_dbg->wait_for_silence_timeout_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "sleep_time:",
- le32_to_cpu(general->sleep_time),
- accum_general->sleep_time,
- delta_general->sleep_time, max_general->sleep_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "slots_out:",
- le32_to_cpu(general->slots_out),
- accum_general->slots_out,
- delta_general->slots_out, max_general->slots_out);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "slots_idle:",
- le32_to_cpu(general->slots_idle),
- accum_general->slots_idle,
- delta_general->slots_idle, max_general->slots_idle);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "tx_on_a:",
- le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
- delta_div->tx_on_a, max_div->tx_on_a);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "tx_on_b:",
- le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
- delta_div->tx_on_b, max_div->tx_on_b);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "exec_time:",
- le32_to_cpu(div->exec_time), accum_div->exec_time,
- delta_div->exec_time, max_div->exec_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "probe_time:",
- le32_to_cpu(div->probe_time), accum_div->probe_time,
- delta_div->probe_time, max_div->probe_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "rx_enable_counter:",
- le32_to_cpu(general->rx_enable_counter),
- accum_general->rx_enable_counter,
- delta_general->rx_enable_counter,
- max_general->rx_enable_counter);
- pos += scnprintf(buf + pos, bufsz - pos,
- fmt_table, "num_of_sos_states:",
- le32_to_cpu(general->num_of_sos_states),
- accum_general->num_of_sos_states,
- delta_general->num_of_sos_states,
- max_general->num_of_sos_states);
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl_ucode_bt_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = (sizeof(struct statistics_bt_activity) * 24) + 200;
- ssize_t ret;
- struct statistics_bt_activity *bt, *accum_bt;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- if (!priv->bt_enable_flag)
- return -EINVAL;
-
- /* make request to uCode to retrieve statistics information */
- mutex_lock(&priv->mutex);
- ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
- mutex_unlock(&priv->mutex);
-
- if (ret) {
- IWL_ERR(priv,
- "Error sending statistics request: %zd\n", ret);
- return -EAGAIN;
- }
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * the statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- bt = &priv->_agn.statistics_bt.general.activity;
- accum_bt = &priv->_agn.accum_statistics_bt.general.activity;
-
- pos += iwl_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "Statistics_BT:\n");
- pos += scnprintf(buf + pos, bufsz - pos,
- "\t\t\tcurrent\t\t\taccumulative\n");
- pos += scnprintf(buf + pos, bufsz - pos,
- "hi_priority_tx_req_cnt:\t\t%u\t\t\t%u\n",
- le32_to_cpu(bt->hi_priority_tx_req_cnt),
- accum_bt->hi_priority_tx_req_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "hi_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
- le32_to_cpu(bt->hi_priority_tx_denied_cnt),
- accum_bt->hi_priority_tx_denied_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "lo_priority_tx_req_cnt:\t\t%u\t\t\t%u\n",
- le32_to_cpu(bt->lo_priority_tx_req_cnt),
- accum_bt->lo_priority_tx_req_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
- le32_to_cpu(bt->lo_priority_tx_denied_cnt),
- accum_bt->lo_priority_tx_denied_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "hi_priority_rx_req_cnt:\t\t%u\t\t\t%u\n",
- le32_to_cpu(bt->hi_priority_rx_req_cnt),
- accum_bt->hi_priority_rx_req_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "hi_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
- le32_to_cpu(bt->hi_priority_rx_denied_cnt),
- accum_bt->hi_priority_rx_denied_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "lo_priority_rx_req_cnt:\t\t%u\t\t\t%u\n",
- le32_to_cpu(bt->lo_priority_rx_req_cnt),
- accum_bt->lo_priority_rx_req_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
- le32_to_cpu(bt->lo_priority_rx_denied_cnt),
- accum_bt->lo_priority_rx_denied_cnt);
-
- pos += scnprintf(buf + pos, bufsz - pos,
- "(rx)num_bt_kills:\t\t%u\t\t\t%u\n",
- le32_to_cpu(priv->_agn.statistics_bt.rx.
- general.num_bt_kills),
- priv->_agn.accum_statistics_bt.rx.
- general.num_bt_kills);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl_reply_tx_error_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = (sizeof(struct reply_tx_error_statistics) * 24) +
- (sizeof(struct reply_agg_tx_error_statistics) * 24) + 200;
- ssize_t ret;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- pos += scnprintf(buf + pos, bufsz - pos, "Statistics_TX_Error:\n");
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_DELAY),
- priv->_agn.reply_tx_stats.pp_delay);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_FEW_BYTES),
- priv->_agn.reply_tx_stats.pp_few_bytes);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_BT_PRIO),
- priv->_agn.reply_tx_stats.pp_bt_prio);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_QUIET_PERIOD),
- priv->_agn.reply_tx_stats.pp_quiet_period);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_CALC_TTAK),
- priv->_agn.reply_tx_stats.pp_calc_ttak);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_tx_fail_reason(
- TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY),
- priv->_agn.reply_tx_stats.int_crossed_retry);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_SHORT_LIMIT),
- priv->_agn.reply_tx_stats.short_limit);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_LONG_LIMIT),
- priv->_agn.reply_tx_stats.long_limit);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_UNDERRUN),
- priv->_agn.reply_tx_stats.fifo_underrun);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_DRAIN_FLOW),
- priv->_agn.reply_tx_stats.drain_flow);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_RFKILL_FLUSH),
- priv->_agn.reply_tx_stats.rfkill_flush);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_LIFE_EXPIRE),
- priv->_agn.reply_tx_stats.life_expire);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_DEST_PS),
- priv->_agn.reply_tx_stats.dest_ps);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_HOST_ABORTED),
- priv->_agn.reply_tx_stats.host_abort);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_BT_RETRY),
- priv->_agn.reply_tx_stats.pp_delay);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_STA_INVALID),
- priv->_agn.reply_tx_stats.sta_invalid);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_FRAG_DROPPED),
- priv->_agn.reply_tx_stats.frag_drop);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_TID_DISABLE),
- priv->_agn.reply_tx_stats.tid_disable);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_FLUSHED),
- priv->_agn.reply_tx_stats.fifo_flush);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_tx_fail_reason(
- TX_STATUS_FAIL_INSUFFICIENT_CF_POLL),
- priv->_agn.reply_tx_stats.insuff_cf_poll);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_tx_fail_reason(TX_STATUS_FAIL_PASSIVE_NO_RX),
- priv->_agn.reply_tx_stats.fail_hw_drop);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_tx_fail_reason(
- TX_STATUS_FAIL_NO_BEACON_ON_RADAR),
- priv->_agn.reply_tx_stats.sta_color_mismatch);
- pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n",
- priv->_agn.reply_tx_stats.unknown);
-
- pos += scnprintf(buf + pos, bufsz - pos,
- "\nStatistics_Agg_TX_Error:\n");
-
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_UNDERRUN_MSK),
- priv->_agn.reply_agg_tx_stats.underrun);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_BT_PRIO_MSK),
- priv->_agn.reply_agg_tx_stats.bt_prio);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_FEW_BYTES_MSK),
- priv->_agn.reply_agg_tx_stats.few_bytes);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_ABORT_MSK),
- priv->_agn.reply_agg_tx_stats.abort);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_agg_tx_fail_reason(
- AGG_TX_STATE_LAST_SENT_TTL_MSK),
- priv->_agn.reply_agg_tx_stats.last_sent_ttl);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_agg_tx_fail_reason(
- AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK),
- priv->_agn.reply_agg_tx_stats.last_sent_try);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_agg_tx_fail_reason(
- AGG_TX_STATE_LAST_SENT_BT_KILL_MSK),
- priv->_agn.reply_agg_tx_stats.last_sent_bt_kill);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_SCD_QUERY_MSK),
- priv->_agn.reply_agg_tx_stats.scd_query);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
- iwl_get_agg_tx_fail_reason(
- AGG_TX_STATE_TEST_BAD_CRC32_MSK),
- priv->_agn.reply_agg_tx_stats.bad_crc32);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_RESPONSE_MSK),
- priv->_agn.reply_agg_tx_stats.response);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DUMP_TX_MSK),
- priv->_agn.reply_agg_tx_stats.dump_tx);
- pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
- iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DELAY_TX_MSK),
- priv->_agn.reply_agg_tx_stats.delay_tx);
- pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n",
- priv->_agn.reply_agg_tx_stats.unknown);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.h b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.h
deleted file mode 100644
index f2573b5..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-debug.h"
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-ssize_t iwl_ucode_rx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl_ucode_tx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl_ucode_general_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl_ucode_bt_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl_reply_tx_error_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-#else
-static ssize_t iwl_ucode_rx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl_ucode_tx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl_ucode_general_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl_ucode_bt_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl_reply_tx_error_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
index 27b5a3e..2ef9448 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -81,52 +81,13 @@
*
******************************************************************************/
-/*
- * The device's EEPROM semaphore prevents conflicts between driver and uCode
- * when accessing the EEPROM; each access is a series of pulses to/from the
- * EEPROM chip, not a single event, so even reads could conflict if they
- * weren't arbitrated by the semaphore.
- */
-int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv)
-{
- u16 count;
- int ret;
-
- for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
- /* Request semaphore */
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
-
- /* See if we got it */
- ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
- EEPROM_SEM_TIMEOUT);
- if (ret >= 0) {
- IWL_DEBUG_IO(priv,
- "Acquired semaphore after %d tries.\n",
- count+1);
- return ret;
- }
- }
-
- return ret;
-}
-
-void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv)
-{
- iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
-
-}
-
int iwl_eeprom_check_version(struct iwl_priv *priv)
{
u16 eeprom_ver;
u16 calib_ver;
eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
- calib_ver = priv->cfg->ops->lib->eeprom_ops.calib_version(priv);
+ calib_ver = iwlagn_eeprom_calib_version(priv);
if (eeprom_ver < priv->cfg->eeprom_ver ||
calib_ver < priv->cfg->eeprom_calib_ver)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 41543ad..b12c72d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -37,54 +37,6 @@
#include "iwl-io.h"
#include "iwl-agn.h"
-int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- int ret = 0;
- struct iwl5000_rxon_assoc_cmd rxon_assoc;
- const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
- const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_ht_single_stream_basic_rates ==
- rxon2->ofdm_ht_single_stream_basic_rates) &&
- (rxon1->ofdm_ht_dual_stream_basic_rates ==
- rxon2->ofdm_ht_dual_stream_basic_rates) &&
- (rxon1->ofdm_ht_triple_stream_basic_rates ==
- rxon2->ofdm_ht_triple_stream_basic_rates) &&
- (rxon1->acquisition_data == rxon2->acquisition_data) &&
- (rxon1->rx_chain == rxon2->rx_chain) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
- IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved1 = 0;
- rxon_assoc.reserved2 = 0;
- rxon_assoc.reserved3 = 0;
- rxon_assoc.ofdm_ht_single_stream_basic_rates =
- ctx->staging.ofdm_ht_single_stream_basic_rates;
- rxon_assoc.ofdm_ht_dual_stream_basic_rates =
- ctx->staging.ofdm_ht_dual_stream_basic_rates;
- rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
- rxon_assoc.ofdm_ht_triple_stream_basic_rates =
- ctx->staging.ofdm_ht_triple_stream_basic_rates;
- rxon_assoc.acquisition_data = ctx->staging.acquisition_data;
-
- ret = iwl_send_cmd_pdu_async(priv, ctx->rxon_assoc_cmd,
- sizeof(rxon_assoc), &rxon_assoc, NULL);
- if (ret)
- return ret;
-
- return ret;
-}
-
int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
{
struct iwl_tx_ant_config_cmd tx_ant_cmd = {
@@ -102,12 +54,6 @@
}
}
-/* Currently this is the superset of everything */
-static u16 iwlagn_get_hcmd_size(u8 cmd_id, u16 len)
-{
- return len;
-}
-
static u16 iwlagn_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
{
u16 size = (u16)sizeof(struct iwl_addsta_cmd);
@@ -364,7 +310,6 @@
}
struct iwl_hcmd_ops iwlagn_hcmd = {
- .rxon_assoc = iwlagn_send_rxon_assoc,
.commit_rxon = iwlagn_commit_rxon,
.set_rxon_chain = iwlagn_set_rxon_chain,
.set_tx_ant = iwlagn_send_tx_ant_config,
@@ -373,7 +318,6 @@
};
struct iwl_hcmd_ops iwlagn_bt_hcmd = {
- .rxon_assoc = iwlagn_send_rxon_assoc,
.commit_rxon = iwlagn_commit_rxon,
.set_rxon_chain = iwlagn_set_rxon_chain,
.set_tx_ant = iwlagn_send_tx_ant_config,
@@ -382,7 +326,6 @@
};
struct iwl_hcmd_utils_ops iwlagn_hcmd_utils = {
- .get_hcmd_size = iwlagn_get_hcmd_size,
.build_addsta_hcmd = iwlagn_build_addsta_hcmd,
.gain_computation = iwlagn_gain_computation,
.chain_noise_reset = iwlagn_chain_noise_reset,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hw.h b/drivers/net/wireless/iwlwifi/iwl-agn-hw.h
index a52b82c..7bd19f4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hw.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
index ed0148d..0d5fda4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -59,8 +59,6 @@
int iwl_alloc_isr_ict(struct iwl_priv *priv)
{
- if (priv->cfg->base_params->use_isr_legacy)
- return 0;
/* allocate shrared data table */
priv->_agn.ict_tbl_vir =
dma_alloc_coherent(&priv->pci_dev->dev,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.c b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
deleted file mode 100644
index c1190d9..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-agn-led.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-commands.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn-led.h"
-
-/* Send led command */
-static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
-{
- struct iwl_host_cmd cmd = {
- .id = REPLY_LEDS_CMD,
- .len = sizeof(struct iwl_led_cmd),
- .data = led_cmd,
- .flags = CMD_ASYNC,
- .callback = NULL,
- };
- u32 reg;
-
- reg = iwl_read32(priv, CSR_LED_REG);
- if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
- iwl_write32(priv, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
-
- return iwl_send_cmd(priv, &cmd);
-}
-
-/* Set led register off */
-void iwlagn_led_enable(struct iwl_priv *priv)
-{
- iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
-}
-
-const struct iwl_led_ops iwlagn_led_ops = {
- .cmd = iwl_send_led_cmd,
-};
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 08ccb94..8e79653 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -172,6 +172,7 @@
static void iwlagn_set_tx_status(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
+ struct iwl_rxon_context *ctx,
struct iwlagn_tx_resp *tx_resp,
int txq_id, bool is_agg)
{
@@ -186,6 +187,13 @@
if (!iwl_is_tx_success(status))
iwlagn_count_tx_err_status(priv, status);
+ if (status == TX_STATUS_FAIL_PASSIVE_NO_RX &&
+ iwl_is_associated_ctx(ctx) && ctx->vif &&
+ ctx->vif->type == NL80211_IFTYPE_STATION) {
+ ctx->last_tx_rejected = true;
+ iwl_stop_queue(priv, &priv->txq[txq_id]);
+ }
+
IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags "
"0x%x retries %d\n",
txq_id,
@@ -242,15 +250,16 @@
/* # frames attempted by Tx command */
if (agg->frame_count == 1) {
+ struct iwl_tx_info *txb;
+
/* Only one frame was attempted; no block-ack will arrive */
idx = start_idx;
IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
agg->frame_count, agg->start_idx, idx);
- iwlagn_set_tx_status(priv,
- IEEE80211_SKB_CB(
- priv->txq[txq_id].txb[idx].skb),
- tx_resp, txq_id, true);
+ txb = &priv->txq[txq_id].txb[idx];
+ iwlagn_set_tx_status(priv, IEEE80211_SKB_CB(txb->skb),
+ txb->ctx, tx_resp, txq_id, true);
agg->wait_for_ba = 0;
} else {
/* Two or more frames were attempted; expect block-ack */
@@ -391,7 +400,8 @@
struct iwl_tx_queue *txq = &priv->txq[txq_id];
struct ieee80211_tx_info *info;
struct iwlagn_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le16_to_cpu(tx_resp->status.status);
+ struct iwl_tx_info *txb;
+ u32 status = le16_to_cpu(tx_resp->status.status);
int tid;
int sta_id;
int freed;
@@ -406,7 +416,8 @@
}
txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
+ txb = &txq->txb[txq->q.read_ptr];
+ info = IEEE80211_SKB_CB(txb->skb);
memset(&info->status, 0, sizeof(info->status));
tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >>
@@ -450,12 +461,14 @@
iwl_wake_queue(priv, txq);
}
} else {
- iwlagn_set_tx_status(priv, info, tx_resp, txq_id, false);
+ iwlagn_set_tx_status(priv, info, txb->ctx, tx_resp,
+ txq_id, false);
freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
- (iwl_queue_space(&txq->q) > txq->q.low_mark))
+ iwl_queue_space(&txq->q) > txq->q.low_mark &&
+ status != TX_STATUS_FAIL_PASSIVE_NO_RX)
iwl_wake_queue(priv, txq);
}
@@ -470,8 +483,6 @@
/* init calibration handlers */
priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
iwlagn_rx_calib_result;
- priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
- iwlagn_rx_calib_complete;
priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
/* set up notification wait support */
@@ -482,8 +493,10 @@
void iwlagn_setup_deferred_work(struct iwl_priv *priv)
{
- /* in agn, the tx power calibration is done in uCode */
- priv->disable_tx_power_cal = 1;
+ /*
+ * nothing need to be done here anymore
+ * still keep for future use if needed
+ */
}
int iwlagn_hw_valid_rtc_data_addr(u32 addr)
@@ -534,9 +547,7 @@
void iwlagn_temperature(struct iwl_priv *priv)
{
/* store temperature from correct statistics (in Celsius) */
- priv->temperature = le32_to_cpu((iwl_bt_statistics(priv)) ?
- priv->_agn.statistics_bt.general.common.temperature :
- priv->_agn.statistics.general.common.temperature);
+ priv->temperature = le32_to_cpu(priv->statistics.common.temperature);
iwl_tt_handler(priv);
}
@@ -652,10 +663,9 @@
const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
- if (!priv->cfg->base_params->use_isr_legacy)
- rb_timeout = RX_RB_TIMEOUT;
+ rb_timeout = RX_RB_TIMEOUT;
- if (priv->cfg->mod_params->amsdu_size_8K)
+ if (iwlagn_mod_params.amsdu_size_8K)
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
else
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
@@ -913,7 +923,6 @@
list_add_tail(&rxb->list, &rxq->rx_free);
rxq->free_count++;
- priv->alloc_rxb_page++;
spin_unlock_irqrestore(&rxq->lock, flags);
}
@@ -1285,9 +1294,17 @@
* mean we never reach it, but at the same time work around
* the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
* here instead of IWL_GOOD_CRC_TH_DISABLED.
+ *
+ * This was fixed in later versions along with some other
+ * scan changes, and the threshold behaves as a flag in those
+ * versions.
*/
- scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
- IWL_GOOD_CRC_TH_NEVER;
+ if (priv->new_scan_threshold_behaviour)
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+ IWL_GOOD_CRC_TH_DISABLED;
+ else
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+ IWL_GOOD_CRC_TH_NEVER;
band = priv->scan_band;
@@ -2245,34 +2262,44 @@
/* notification wait support */
void iwlagn_init_notification_wait(struct iwl_priv *priv,
struct iwl_notification_wait *wait_entry,
+ u8 cmd,
void (*fn)(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt),
- u8 cmd)
+ struct iwl_rx_packet *pkt,
+ void *data),
+ void *fn_data)
{
wait_entry->fn = fn;
+ wait_entry->fn_data = fn_data;
wait_entry->cmd = cmd;
wait_entry->triggered = false;
+ wait_entry->aborted = false;
spin_lock_bh(&priv->_agn.notif_wait_lock);
list_add(&wait_entry->list, &priv->_agn.notif_waits);
spin_unlock_bh(&priv->_agn.notif_wait_lock);
}
-signed long iwlagn_wait_notification(struct iwl_priv *priv,
- struct iwl_notification_wait *wait_entry,
- unsigned long timeout)
+int iwlagn_wait_notification(struct iwl_priv *priv,
+ struct iwl_notification_wait *wait_entry,
+ unsigned long timeout)
{
int ret;
ret = wait_event_timeout(priv->_agn.notif_waitq,
- wait_entry->triggered,
+ wait_entry->triggered || wait_entry->aborted,
timeout);
spin_lock_bh(&priv->_agn.notif_wait_lock);
list_del(&wait_entry->list);
spin_unlock_bh(&priv->_agn.notif_wait_lock);
- return ret;
+ if (wait_entry->aborted)
+ return -EIO;
+
+ /* return value is always >= 0 */
+ if (ret <= 0)
+ return -ETIMEDOUT;
+ return 0;
}
void iwlagn_remove_notification(struct iwl_priv *priv,
@@ -2282,3 +2309,87 @@
list_del(&wait_entry->list);
spin_unlock_bh(&priv->_agn.notif_wait_lock);
}
+
+int iwlagn_start_device(struct iwl_priv *priv)
+{
+ int ret;
+
+ if (iwl_prepare_card_hw(priv)) {
+ IWL_WARN(priv, "Exit HW not ready\n");
+ return -EIO;
+ }
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
+ else
+ set_bit(STATUS_RF_KILL_HW, &priv->status);
+
+ if (iwl_is_rfkill(priv)) {
+ wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
+ iwl_enable_interrupts(priv);
+ return -ERFKILL;
+ }
+
+ iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+
+ ret = iwlagn_hw_nic_init(priv);
+ if (ret) {
+ IWL_ERR(priv, "Unable to init nic\n");
+ return ret;
+ }
+
+ /* make sure rfkill handshake bits are cleared */
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ /* clear (again), then enable host interrupts */
+ iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+ iwl_enable_interrupts(priv);
+
+ /* really make sure rfkill handshake bits are cleared */
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+ return 0;
+}
+
+void iwlagn_stop_device(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ /* stop and reset the on-board processor */
+ iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ /* tell the device to stop sending interrupts */
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_disable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ iwl_synchronize_irq(priv);
+
+ /* device going down, Stop using ICT table */
+ iwl_disable_ict(priv);
+
+ /*
+ * If a HW restart happens during firmware loading,
+ * then the firmware loading might call this function
+ * and later it might be called again due to the
+ * restart. So don't process again if the device is
+ * already dead.
+ */
+ if (test_bit(STATUS_DEVICE_ENABLED, &priv->status)) {
+ iwlagn_txq_ctx_stop(priv);
+ iwlagn_rxq_stop(priv);
+
+ /* Power-down device's busmaster DMA clocks */
+ iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+ udelay(5);
+ }
+
+ /* Make sure (redundant) we've released our request to stay awake */
+ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+
+ /* Stop the device, and put it in low power state */
+ iwl_apm_stop(priv);
+}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index d03b473..91f2655 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -115,13 +115,18 @@
/* FIXME:RS: ^^ should be INV (legacy) */
};
+static inline u8 rs_extract_rate(u32 rate_n_flags)
+{
+ return (u8)(rate_n_flags & RATE_MCS_RATE_MSK);
+}
+
static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
{
int idx = 0;
/* HT rate format */
if (rate_n_flags & RATE_MCS_HT_MSK) {
- idx = (rate_n_flags & 0xff);
+ idx = rs_extract_rate(rate_n_flags);
if (idx >= IWL_RATE_MIMO3_6M_PLCP)
idx = idx - IWL_RATE_MIMO3_6M_PLCP;
@@ -138,7 +143,8 @@
/* legacy rate format, search for match in table */
} else {
for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
- if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
+ if (iwl_rates[idx].plcp ==
+ rs_extract_rate(rate_n_flags))
return idx;
}
@@ -239,11 +245,6 @@
#define MCS_INDEX_PER_STREAM (8)
-static inline u8 rs_extract_rate(u32 rate_n_flags)
-{
- return (u8)(rate_n_flags & 0xFF);
-}
-
static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
{
window->data = 0;
@@ -2770,16 +2771,13 @@
static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
gfp_t gfp)
{
- struct iwl_lq_sta *lq_sta;
struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
struct iwl_priv *priv;
priv = (struct iwl_priv *)priv_rate;
IWL_DEBUG_RATE(priv, "create station rate scale window\n");
- lq_sta = &sta_priv->lq_sta;
-
- return lq_sta;
+ return &sta_priv->lq_sta;
}
/*
@@ -2912,7 +2910,8 @@
ant_toggle_cnt = 1;
repeat_rate = IWL_NUMBER_TRY;
} else {
- repeat_rate = IWL_HT_NUMBER_TRY;
+ repeat_rate = min(IWL_HT_NUMBER_TRY,
+ LINK_QUAL_AGG_DISABLE_START_DEF - 1);
}
lq_cmd->general_params.mimo_delimiter =
@@ -3087,7 +3086,7 @@
struct iwl_lq_sta *lq_sta = file->private_data;
struct iwl_priv *priv;
char buf[64];
- int buf_size;
+ size_t buf_size;
u32 parsed_rate;
struct iwl_station_priv *sta_priv =
container_of(lq_sta, struct iwl_station_priv, lq_sta);
@@ -3257,7 +3256,6 @@
{
char buff[120];
int desc = 0;
- ssize_t ret;
struct iwl_lq_sta *lq_sta = file->private_data;
struct iwl_priv *priv;
@@ -3274,8 +3272,7 @@
"Bit Rate= %d Mb/s\n",
iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
- ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
- return ret;
+ return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
}
static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index 184828c..bdae82e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -41,20 +41,6 @@
u8 next_rs_tgg; /* next rate used in TGG rs algo */
};
-struct iwl3945_rate_info {
- u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
- u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */
- u8 prev_ieee; /* previous rate in IEEE speeds */
- u8 next_ieee; /* next rate in IEEE speeds */
- u8 prev_rs; /* previous rate used in rs algo */
- u8 next_rs; /* next rate used in rs algo */
- u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
- u8 next_rs_tgg; /* next rate used in TGG rs algo */
- u8 table_rs_index; /* index in rate scale table cmd */
- u8 prev_table_rs; /* prev in rate table cmd */
-};
-
-
/*
* These serve as indexes into
* struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
@@ -75,7 +61,6 @@
IWL_RATE_60M_INDEX,
IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */
- IWL_RATE_COUNT_3945 = IWL_RATE_COUNT - 1,
IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
IWL_RATE_INVALID = IWL_RATE_COUNT,
};
@@ -98,7 +83,6 @@
enum {
IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
- IWL39_LAST_OFDM_RATE = IWL_RATE_54M_INDEX,
IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
@@ -213,7 +197,6 @@
IWL_CCK_BASIC_RATES_MASK)
#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
-#define IWL_RATES_MASK_3945 ((1 << IWL_RATE_COUNT_3945) - 1)
#define IWL_INVALID_VALUE -1
@@ -453,19 +436,9 @@
}
-/**
- * iwl3945_rate_scale_init - Initialize the rate scale table based on assoc info
- *
- * The specific throughput table used is based on the type of network
- * the associated with, including A, B, G, and G w/ TGG protection
- */
-extern void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
-
/* Initialize station's rate scaling information after adding station */
extern void iwl_rs_rate_init(struct iwl_priv *priv,
struct ieee80211_sta *sta, u8 sta_id);
-extern void iwl3945_rs_rate_init(struct iwl_priv *priv,
- struct ieee80211_sta *sta, u8 sta_id);
/**
* iwl_rate_control_register - Register the rate control algorithm callbacks
@@ -478,7 +451,6 @@
*
*/
extern int iwlagn_rate_control_register(void);
-extern int iwl3945_rate_control_register(void);
/**
* iwl_rate_control_unregister - Unregister the rate control callbacks
@@ -487,6 +459,5 @@
* the driver is unloaded.
*/
extern void iwlagn_rate_control_unregister(void);
-extern void iwl3945_rate_control_unregister(void);
#endif /* __iwl_agn__rs__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index dfdbea6..0238743 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -29,6 +29,7 @@
#include "iwl-sta.h"
#include "iwl-core.h"
#include "iwl-agn-calib.h"
+#include "iwl-helpers.h"
static int iwlagn_disable_bss(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
@@ -57,8 +58,9 @@
u8 old_dev_type = send->dev_type;
int ret;
- iwlagn_init_notification_wait(priv, &disable_wait, NULL,
- REPLY_WIPAN_DEACTIVATION_COMPLETE);
+ iwlagn_init_notification_wait(priv, &disable_wait,
+ REPLY_WIPAN_DEACTIVATION_COMPLETE,
+ NULL, NULL);
send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
send->dev_type = RXON_DEV_TYPE_P2P;
@@ -71,13 +73,9 @@
IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
iwlagn_remove_notification(priv, &disable_wait);
} else {
- signed long wait_res;
-
- wait_res = iwlagn_wait_notification(priv, &disable_wait, HZ);
- if (wait_res == 0) {
+ ret = iwlagn_wait_notification(priv, &disable_wait, HZ);
+ if (ret)
IWL_ERR(priv, "Timed out waiting for PAN disable\n");
- ret = -EIO;
- }
}
return ret;
@@ -123,6 +121,151 @@
return iwlagn_send_beacon_cmd(priv);
}
+static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int ret = 0;
+ struct iwl_rxon_assoc_cmd rxon_assoc;
+ const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
+ const struct iwl_rxon_cmd *rxon2 = &ctx->active;
+
+ if ((rxon1->flags == rxon2->flags) &&
+ (rxon1->filter_flags == rxon2->filter_flags) &&
+ (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
+ (rxon1->ofdm_ht_single_stream_basic_rates ==
+ rxon2->ofdm_ht_single_stream_basic_rates) &&
+ (rxon1->ofdm_ht_dual_stream_basic_rates ==
+ rxon2->ofdm_ht_dual_stream_basic_rates) &&
+ (rxon1->ofdm_ht_triple_stream_basic_rates ==
+ rxon2->ofdm_ht_triple_stream_basic_rates) &&
+ (rxon1->acquisition_data == rxon2->acquisition_data) &&
+ (rxon1->rx_chain == rxon2->rx_chain) &&
+ (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+ IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
+ return 0;
+ }
+
+ rxon_assoc.flags = ctx->staging.flags;
+ rxon_assoc.filter_flags = ctx->staging.filter_flags;
+ rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
+ rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
+ rxon_assoc.reserved1 = 0;
+ rxon_assoc.reserved2 = 0;
+ rxon_assoc.reserved3 = 0;
+ rxon_assoc.ofdm_ht_single_stream_basic_rates =
+ ctx->staging.ofdm_ht_single_stream_basic_rates;
+ rxon_assoc.ofdm_ht_dual_stream_basic_rates =
+ ctx->staging.ofdm_ht_dual_stream_basic_rates;
+ rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
+ rxon_assoc.ofdm_ht_triple_stream_basic_rates =
+ ctx->staging.ofdm_ht_triple_stream_basic_rates;
+ rxon_assoc.acquisition_data = ctx->staging.acquisition_data;
+
+ ret = iwl_send_cmd_pdu_async(priv, ctx->rxon_assoc_cmd,
+ sizeof(rxon_assoc), &rxon_assoc, NULL);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
+static int iwlagn_rxon_disconn(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int ret;
+ struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+ if (ctx->ctxid == IWL_RXON_CTX_BSS)
+ ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
+ else
+ ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+ if (ret)
+ return ret;
+
+ /*
+ * Un-assoc RXON clears the station table and WEP
+ * keys, so we have to restore those afterwards.
+ */
+ iwl_clear_ucode_stations(priv, ctx);
+ iwl_restore_stations(priv, ctx);
+ ret = iwl_restore_default_wep_keys(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+ return ret;
+ }
+
+ memcpy(active, &ctx->staging, sizeof(*active));
+ return 0;
+}
+
+static int iwlagn_rxon_connect(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int ret;
+ struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+ /* RXON timing must be before associated RXON */
+ ret = iwl_send_rxon_timing(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+ return ret;
+ }
+ /* QoS info may be cleared by previous un-assoc RXON */
+ iwlagn_update_qos(priv, ctx);
+
+ /*
+ * We'll run into this code path when beaconing is
+ * enabled, but then we also need to send the beacon
+ * to the device.
+ */
+ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
+ ret = iwlagn_update_beacon(priv, ctx->vif);
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending required beacon (%d)!\n",
+ ret);
+ return ret;
+ }
+ }
+
+ priv->start_calib = 0;
+ /*
+ * Apply the new configuration.
+ *
+ * Associated RXON doesn't clear the station table in uCode,
+ * so we don't need to restore stations etc. after this.
+ */
+ ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+ sizeof(struct iwl_rxon_cmd), &ctx->staging);
+ if (ret) {
+ IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+ return ret;
+ }
+ memcpy(active, &ctx->staging, sizeof(*active));
+
+ iwl_reprogram_ap_sta(priv, ctx);
+
+ /* IBSS beacon needs to be sent after setting assoc */
+ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
+ if (iwlagn_update_beacon(priv, ctx->vif))
+ IWL_ERR(priv, "Error sending IBSS beacon\n");
+ iwl_init_sensitivity(priv);
+
+ /*
+ * If we issue a new RXON command which required a tune then
+ * we must send a new TXPOWER command or we won't be able to
+ * Tx any frames.
+ *
+ * It's expected we set power here if channel is changing.
+ */
+ ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
+ if (ret) {
+ IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
/**
* iwlagn_commit_rxon - commit staging_rxon to hardware
*
@@ -130,6 +273,16 @@
* the active_rxon structure is updated with the new data. This
* function correctly transitions out of the RXON_ASSOC_MSK state if
* a HW tune is required based on the RXON structure changes.
+ *
+ * The connect/disconnect flow should be as the following:
+ *
+ * 1. make sure send RXON command with association bit unset if not connect
+ * this should include the channel and the band for the candidate
+ * to be connected to
+ * 2. Add Station before RXON association with the AP
+ * 3. RXON_timing has to send before RXON for connection
+ * 4. full RXON command - associated bit set
+ * 5. use RXON_ASSOC command to update any flags changes
*/
int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
@@ -179,6 +332,7 @@
else
ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+ iwl_print_rx_config_cmd(priv, ctx);
ret = iwl_check_rxon_cmd(priv, ctx);
if (ret) {
IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
@@ -202,14 +356,13 @@
* and other flags for the current radio configuration.
*/
if (!iwl_full_rxon_required(priv, ctx)) {
- ret = iwl_send_rxon_assoc(priv, ctx);
+ ret = iwlagn_send_rxon_assoc(priv, ctx);
if (ret) {
IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
return ret;
}
memcpy(active, &ctx->staging, sizeof(*active));
- iwl_print_rx_config_cmd(priv, ctx);
return 0;
}
@@ -219,7 +372,7 @@
return ret;
}
- iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
+ iwl_set_rxon_hwcrypto(priv, ctx, !iwlagn_mod_params.sw_crypto);
IWL_DEBUG_INFO(priv,
"Going to commit RXON\n"
@@ -237,92 +390,13 @@
* set up filters in the device.
*/
if ((old_assoc && new_assoc) || !new_assoc) {
- if (ctx->ctxid == IWL_RXON_CTX_BSS)
- ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
- else
- ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+ ret = iwlagn_rxon_disconn(priv, ctx);
if (ret)
return ret;
-
- memcpy(active, &ctx->staging, sizeof(*active));
-
- /*
- * Un-assoc RXON clears the station table and WEP
- * keys, so we have to restore those afterwards.
- */
- iwl_clear_ucode_stations(priv, ctx);
- iwl_restore_stations(priv, ctx);
- ret = iwl_restore_default_wep_keys(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
}
- /* RXON timing must be before associated RXON */
- ret = iwl_send_rxon_timing(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
- return ret;
- }
-
- if (new_assoc) {
- /* QoS info may be cleared by previous un-assoc RXON */
- iwlagn_update_qos(priv, ctx);
-
- /*
- * We'll run into this code path when beaconing is
- * enabled, but then we also need to send the beacon
- * to the device.
- */
- if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
- ret = iwlagn_update_beacon(priv, ctx->vif);
- if (ret) {
- IWL_ERR(priv,
- "Error sending required beacon (%d)!\n",
- ret);
- return ret;
- }
- }
-
- priv->start_calib = 0;
- /*
- * Apply the new configuration.
- *
- * Associated RXON doesn't clear the station table in uCode,
- * so we don't need to restore stations etc. after this.
- */
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd), &ctx->staging);
- if (ret) {
- IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
- return ret;
- }
- memcpy(active, &ctx->staging, sizeof(*active));
-
- iwl_reprogram_ap_sta(priv, ctx);
-
- /* IBSS beacon needs to be sent after setting assoc */
- if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
- if (iwlagn_update_beacon(priv, ctx->vif))
- IWL_ERR(priv, "Error sending IBSS beacon\n");
- }
-
- iwl_print_rx_config_cmd(priv, ctx);
-
- iwl_init_sensitivity(priv);
-
- /*
- * If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames.
- *
- * It's expected we set power here if channel is changing.
- */
- ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
- if (ret) {
- IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
- return ret;
- }
+ if (new_assoc)
+ return iwlagn_rxon_connect(priv, ctx);
return 0;
}
@@ -335,7 +409,6 @@
struct ieee80211_channel *channel = conf->channel;
const struct iwl_channel_info *ch_info;
int ret = 0;
- bool ht_changed[NUM_IWL_RXON_CTX] = {};
IWL_DEBUG_MAC80211(priv, "changed %#x", changed);
@@ -383,10 +456,8 @@
for_each_context(priv, ctx) {
/* Configure HT40 channels */
- if (ctx->ht.enabled != conf_is_ht(conf)) {
+ if (ctx->ht.enabled != conf_is_ht(conf))
ctx->ht.enabled = conf_is_ht(conf);
- ht_changed[ctx->ctxid] = true;
- }
if (ctx->ht.enabled) {
if (conf_is_ht40_minus(conf)) {
@@ -455,8 +526,6 @@
if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
continue;
iwlagn_commit_rxon(priv, ctx);
- if (ht_changed[ctx->ctxid])
- iwlagn_update_qos(priv, ctx);
}
out:
mutex_unlock(&priv->mutex);
@@ -600,6 +669,18 @@
priv->timestamp = bss_conf->timestamp;
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
} else {
+ /*
+ * If we disassociate while there are pending
+ * frames, just wake up the queues and let the
+ * frames "escape" ... This shouldn't really
+ * be happening to start with, but we should
+ * not get stuck in this case either since it
+ * can happen if userspace gets confused.
+ */
+ if (ctx->last_tx_rejected) {
+ ctx->last_tx_rejected = false;
+ iwl_wake_any_queue(priv, ctx);
+ }
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
}
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index 35f085a..079275f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -474,7 +474,7 @@
memset(&priv->stations[sta_id].keyinfo, 0,
sizeof(struct iwl_hw_key));
memset(&priv->stations[sta_id].sta.key, 0,
- sizeof(struct iwl4965_keyinfo));
+ sizeof(struct iwl_keyinfo));
priv->stations[sta_id].sta.key.key_flags =
STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
priv->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tt.c b/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
index e3a8216..348f74f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tt.h b/drivers/net/wireless/iwlwifi/iwl-agn-tt.h
index d550604..d118ed2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tt.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tt.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index a709d05..342de78 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -98,9 +98,9 @@
/**
* iwlagn_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
-void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- u16 byte_cnt)
+static void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq,
+ u16 byte_cnt)
{
struct iwlagn_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
int write_ptr = txq->q.write_ptr;
@@ -112,21 +112,19 @@
WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
- if (txq_id != priv->cmd_queue) {
- sta_id = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
- sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
+ sta_id = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
+ sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
- switch (sec_ctl & TX_CMD_SEC_MSK) {
- case TX_CMD_SEC_CCM:
- len += CCMP_MIC_LEN;
- break;
- case TX_CMD_SEC_TKIP:
- len += TKIP_ICV_LEN;
- break;
- case TX_CMD_SEC_WEP:
- len += WEP_IV_LEN + WEP_ICV_LEN;
- break;
- }
+ switch (sec_ctl & TX_CMD_SEC_MSK) {
+ case TX_CMD_SEC_CCM:
+ len += CCMP_MIC_LEN;
+ break;
+ case TX_CMD_SEC_TKIP:
+ len += TKIP_ICV_LEN;
+ break;
+ case TX_CMD_SEC_WEP:
+ len += WEP_IV_LEN + WEP_ICV_LEN;
+ break;
}
bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12));
@@ -138,8 +136,8 @@
tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
}
-void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
- struct iwl_tx_queue *txq)
+static void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq)
{
struct iwlagn_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
int txq_id = txq->q.id;
@@ -222,13 +220,8 @@
scd_retry ? "BA" : "AC/CMD", txq_id, tx_fifo_id);
}
-int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
- int tx_fifo, int sta_id, int tid, u16 ssn_idx)
+static int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id, int sta_id, int tid)
{
- unsigned long flags;
- u16 ra_tid;
- int ret;
-
if ((IWLAGN_FIRST_AMPDU_QUEUE > txq_id) ||
(IWLAGN_FIRST_AMPDU_QUEUE +
priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
@@ -240,12 +233,33 @@
return -EINVAL;
}
- ra_tid = BUILD_RAxTID(sta_id, tid);
-
/* Modify device's station table to Tx this TID */
- ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
- if (ret)
- return ret;
+ return iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
+}
+
+void iwlagn_txq_agg_queue_setup(struct iwl_priv *priv,
+ struct ieee80211_sta *sta,
+ int tid, int frame_limit)
+{
+ int sta_id, tx_fifo, txq_id, ssn_idx;
+ u16 ra_tid;
+ unsigned long flags;
+ struct iwl_tid_data *tid_data;
+
+ sta_id = iwl_sta_id(sta);
+ if (WARN_ON(sta_id == IWL_INVALID_STATION))
+ return;
+ if (WARN_ON(tid >= MAX_TID_COUNT))
+ return;
+
+ spin_lock_irqsave(&priv->sta_lock, flags);
+ tid_data = &priv->stations[sta_id].tid[tid];
+ ssn_idx = SEQ_TO_SN(tid_data->seq_number);
+ txq_id = tid_data->agg.txq_id;
+ tx_fifo = tid_data->agg.tx_fifo;
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+ ra_tid = BUILD_RAxTID(sta_id, tid);
spin_lock_irqsave(&priv->lock, flags);
@@ -271,10 +285,10 @@
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
sizeof(u32),
- ((SCD_WIN_SIZE <<
+ ((frame_limit <<
IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
- ((SCD_FRAME_LIMIT <<
+ ((frame_limit <<
IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
@@ -284,12 +298,10 @@
iwlagn_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
}
-int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
- u16 ssn_idx, u8 tx_fifo)
+static int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
+ u16 ssn_idx, u8 tx_fifo)
{
if ((IWLAGN_FIRST_AMPDU_QUEUE > txq_id) ||
(IWLAGN_FIRST_AMPDU_QUEUE +
@@ -525,7 +537,7 @@
struct iwl_tx_cmd *tx_cmd;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
int txq_id;
- dma_addr_t phys_addr;
+ dma_addr_t phys_addr = 0;
dma_addr_t txcmd_phys;
dma_addr_t scratch_phys;
u16 len, firstlen, secondlen;
@@ -552,7 +564,7 @@
spin_lock_irqsave(&priv->lock, flags);
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
- goto drop_unlock;
+ goto drop_unlock_priv;
}
fc = hdr->frame_control;
@@ -568,12 +580,17 @@
hdr_len = ieee80211_hdrlen(fc);
- /* Find index into station table for destination station */
- sta_id = iwl_sta_id_or_broadcast(priv, ctx, info->control.sta);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop_unlock;
+ /* For management frames use broadcast id to do not break aggregation */
+ if (!ieee80211_is_data(fc))
+ sta_id = ctx->bcast_sta_id;
+ else {
+ /* Find index into station table for destination station */
+ sta_id = iwl_sta_id_or_broadcast(priv, ctx, info->control.sta);
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+ hdr->addr1);
+ goto drop_unlock_priv;
+ }
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -616,10 +633,10 @@
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) {
- spin_unlock(&priv->sta_lock);
- goto drop_unlock;
- }
+
+ if (WARN_ON_ONCE(tid >= MAX_TID_COUNT))
+ goto drop_unlock_sta;
+
seq_number = priv->stations[sta_id].tid[tid].seq_number;
seq_number &= IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = hdr->seq_ctrl &
@@ -637,18 +654,8 @@
txq = &priv->txq[txq_id];
q = &txq->q;
- if (unlikely(iwl_queue_space(q) < q->high_mark)) {
- spin_unlock(&priv->sta_lock);
- goto drop_unlock;
- }
-
- if (ieee80211_is_data_qos(fc)) {
- priv->stations[sta_id].tid[tid].tfds_in_queue++;
- if (!ieee80211_has_morefrags(fc))
- priv->stations[sta_id].tid[tid].seq_number = seq_number;
- }
-
- spin_unlock(&priv->sta_lock);
+ if (unlikely(iwl_queue_space(q) < q->high_mark))
+ goto drop_unlock_sta;
/* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
@@ -712,12 +719,10 @@
txcmd_phys = pci_map_single(priv->pci_dev,
&out_cmd->hdr, firstlen,
PCI_DMA_BIDIRECTIONAL);
+ if (unlikely(pci_dma_mapping_error(priv->pci_dev, txcmd_phys)))
+ goto drop_unlock_sta;
dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
dma_unmap_len_set(out_meta, len, firstlen);
- /* Add buffer containing Tx command and MAC(!) header to TFD's
- * first entry */
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- txcmd_phys, firstlen, 1, 0);
if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
@@ -732,10 +737,30 @@
if (secondlen > 0) {
phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
secondlen, PCI_DMA_TODEVICE);
+ if (unlikely(pci_dma_mapping_error(priv->pci_dev, phys_addr))) {
+ pci_unmap_single(priv->pci_dev,
+ dma_unmap_addr(out_meta, mapping),
+ dma_unmap_len(out_meta, len),
+ PCI_DMA_BIDIRECTIONAL);
+ goto drop_unlock_sta;
+ }
+ }
+
+ if (ieee80211_is_data_qos(fc)) {
+ priv->stations[sta_id].tid[tid].tfds_in_queue++;
+ if (!ieee80211_has_morefrags(fc))
+ priv->stations[sta_id].tid[tid].seq_number = seq_number;
+ }
+
+ spin_unlock(&priv->sta_lock);
+
+ /* Attach buffers to TFD */
+ priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+ txcmd_phys, firstlen, 1, 0);
+ if (secondlen > 0)
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
phys_addr, secondlen,
0, 0);
- }
scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
offsetof(struct iwl_tx_cmd, scratch);
@@ -754,8 +779,8 @@
/* Set up entry for this TFD in Tx byte-count array */
if (info->flags & IEEE80211_TX_CTL_AMPDU)
- priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
- le16_to_cpu(tx_cmd->len));
+ iwlagn_txq_update_byte_cnt_tbl(priv, txq,
+ le16_to_cpu(tx_cmd->len));
pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
firstlen, PCI_DMA_BIDIRECTIONAL);
@@ -801,7 +826,9 @@
return 0;
-drop_unlock:
+drop_unlock_sta:
+ spin_unlock(&priv->sta_lock);
+drop_unlock_priv:
spin_unlock_irqrestore(&priv->lock, flags);
return -1;
}
@@ -1034,11 +1061,11 @@
tid_data = &priv->stations[sta_id].tid[tid];
*ssn = SEQ_TO_SN(tid_data->seq_number);
tid_data->agg.txq_id = txq_id;
+ tid_data->agg.tx_fifo = tx_fifo;
iwl_set_swq_id(&priv->txq[txq_id], get_ac_from_tid(tid), txq_id);
spin_unlock_irqrestore(&priv->sta_lock, flags);
- ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo,
- sta_id, tid, *ssn);
+ ret = iwlagn_txq_agg_enable(priv, txq_id, sta_id, tid);
if (ret)
return ret;
@@ -1125,8 +1152,7 @@
* to deactivate the uCode queue, just return "success" to allow
* mac80211 to clean up it own data.
*/
- priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn,
- tx_fifo_id);
+ iwlagn_txq_agg_disable(priv, txq_id, ssn, tx_fifo_id);
spin_unlock_irqrestore(&priv->lock, flags);
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
@@ -1155,8 +1181,7 @@
u16 ssn = SEQ_TO_SN(tid_data->seq_number);
int tx_fifo = get_fifo_from_tid(ctx, tid);
IWL_DEBUG_HT(priv, "HW queue empty: continue DELBA flow\n");
- priv->cfg->ops->lib->txq_agg_disable(priv, txq_id,
- ssn, tx_fifo);
+ iwlagn_txq_agg_disable(priv, txq_id, ssn, tx_fifo);
tid_data->agg.state = IWL_AGG_OFF;
ieee80211_stop_tx_ba_cb_irqsafe(ctx->vif, addr, tid);
}
@@ -1224,16 +1249,19 @@
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
tx_info = &txq->txb[txq->q.read_ptr];
- iwlagn_tx_status(priv, tx_info,
- txq_id >= IWLAGN_FIRST_AMPDU_QUEUE);
+
+ if (WARN_ON_ONCE(tx_info->skb == NULL))
+ continue;
hdr = (struct ieee80211_hdr *)tx_info->skb->data;
- if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+ if (ieee80211_is_data_qos(hdr->frame_control))
nfreed++;
+
+ iwlagn_tx_status(priv, tx_info,
+ txq_id >= IWLAGN_FIRST_AMPDU_QUEUE);
tx_info->skb = NULL;
- if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
- priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
+ iwlagn_txq_inval_byte_cnt_tbl(priv, txq);
priv->cfg->ops->lib->txq_free_tfd(priv, txq);
}
@@ -1251,11 +1279,11 @@
struct iwl_compressed_ba_resp *ba_resp)
{
- int i, sh, ack;
+ int sh;
u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
- int successes = 0;
struct ieee80211_tx_info *info;
+ u64 bitmap, sent_bitmap;
if (unlikely(!agg->wait_for_ba)) {
if (unlikely(ba_resp->bitmap))
@@ -1269,70 +1297,42 @@
/* Calculate shift to align block-ack bits with our Tx window bits */
sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl >> 4);
- if (sh < 0) /* tbw something is wrong with indices */
+ if (sh < 0)
sh += 0x100;
- if (agg->frame_count > (64 - sh)) {
- IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size");
- return -1;
- }
- if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
+ /*
+ * Check for success or failure according to the
+ * transmitted bitmap and block-ack bitmap
+ */
+ bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
+ sent_bitmap = bitmap & agg->bitmap;
+
+ /* Sanity check values reported by uCode */
+ if (ba_resp->txed_2_done > ba_resp->txed) {
+ IWL_DEBUG_TX_REPLY(priv,
+ "bogus sent(%d) and ack(%d) count\n",
+ ba_resp->txed, ba_resp->txed_2_done);
/*
- * sent and ack information provided by uCode
- * use it instead of figure out ourself
+ * set txed_2_done = txed,
+ * so it won't impact rate scale
*/
- if (ba_resp->txed_2_done > ba_resp->txed) {
- IWL_DEBUG_TX_REPLY(priv,
- "bogus sent(%d) and ack(%d) count\n",
- ba_resp->txed, ba_resp->txed_2_done);
- /*
- * set txed_2_done = txed,
- * so it won't impact rate scale
- */
- ba_resp->txed = ba_resp->txed_2_done;
- }
- IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
- ba_resp->txed, ba_resp->txed_2_done);
- } else {
- u64 bitmap, sent_bitmap;
+ ba_resp->txed = ba_resp->txed_2_done;
+ }
+ IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
+ ba_resp->txed, ba_resp->txed_2_done);
- /* don't use 64-bit values for now */
- bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
-
- /* check for success or failure according to the
- * transmitted bitmap and block-ack bitmap */
- sent_bitmap = bitmap & agg->bitmap;
-
- /* For each frame attempted in aggregation,
- * update driver's record of tx frame's status. */
- i = 0;
- while (sent_bitmap) {
- ack = sent_bitmap & 1ULL;
- successes += ack;
- IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
- ack ? "ACK" : "NACK", i,
- (agg->start_idx + i) & 0xff,
- agg->start_idx + i);
- sent_bitmap >>= 1;
- ++i;
- }
-
- IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n",
- (unsigned long long)bitmap);
+ /* Find the first ACKed frame to store the TX status */
+ while (sent_bitmap && !(sent_bitmap & 1)) {
+ agg->start_idx = (agg->start_idx + 1) & 0xff;
+ sent_bitmap >>= 1;
}
info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb);
memset(&info->status, 0, sizeof(info->status));
info->flags |= IEEE80211_TX_STAT_ACK;
info->flags |= IEEE80211_TX_STAT_AMPDU;
- if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
- info->status.ampdu_ack_len = ba_resp->txed_2_done;
- info->status.ampdu_len = ba_resp->txed;
-
- } else {
- info->status.ampdu_ack_len = successes;
- info->status.ampdu_len = agg->frame_count;
- }
+ info->status.ampdu_ack_len = ba_resp->txed_2_done;
+ info->status.ampdu_len = ba_resp->txed;
iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
return 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index d807e5e..8bda0e8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -161,47 +161,19 @@
}
static int iwlagn_load_given_ucode(struct iwl_priv *priv,
- struct fw_desc *inst_image,
- struct fw_desc *data_image)
+ struct fw_img *image)
{
int ret = 0;
- ret = iwlagn_load_section(priv, "INST", inst_image,
+ ret = iwlagn_load_section(priv, "INST", &image->code,
IWLAGN_RTC_INST_LOWER_BOUND);
if (ret)
return ret;
- return iwlagn_load_section(priv, "DATA", data_image,
+ return iwlagn_load_section(priv, "DATA", &image->data,
IWLAGN_RTC_DATA_LOWER_BOUND);
}
-int iwlagn_load_ucode(struct iwl_priv *priv)
-{
- int ret = 0;
-
- /* check whether init ucode should be loaded, or rather runtime ucode */
- if (priv->ucode_init.len && (priv->ucode_type == UCODE_NONE)) {
- IWL_DEBUG_INFO(priv, "Init ucode found. Loading init ucode...\n");
- ret = iwlagn_load_given_ucode(priv,
- &priv->ucode_init, &priv->ucode_init_data);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Init ucode load complete.\n");
- priv->ucode_type = UCODE_INIT;
- }
- } else {
- IWL_DEBUG_INFO(priv, "Init ucode not found, or already loaded. "
- "Loading runtime ucode...\n");
- ret = iwlagn_load_given_ucode(priv,
- &priv->ucode_code, &priv->ucode_data);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Runtime ucode load complete.\n");
- priv->ucode_type = UCODE_RT;
- }
- }
-
- return ret;
-}
-
/*
* Calibration
*/
@@ -297,33 +269,9 @@
iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len);
}
-void iwlagn_rx_calib_complete(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
+int iwlagn_init_alive_start(struct iwl_priv *priv)
{
- IWL_DEBUG_INFO(priv, "Init. calibration is completed, restarting fw.\n");
- queue_work(priv->workqueue, &priv->restart);
-}
-
-void iwlagn_init_alive_start(struct iwl_priv *priv)
-{
- int ret = 0;
-
- /* initialize uCode was loaded... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (iwl_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- ret = priv->cfg->ops->lib->alive_notify(priv);
- if (ret) {
- IWL_WARN(priv,
- "Could not complete ALIVE transition: %d\n", ret);
- goto restart;
- }
+ int ret;
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
@@ -333,24 +281,25 @@
* no need to close the envlope since we are going
* to load the runtime uCode later.
*/
- iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+ ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ if (ret)
+ return ret;
}
- iwlagn_send_calib_cfg(priv);
+
+ ret = iwlagn_send_calib_cfg(priv);
+ if (ret)
+ return ret;
/**
* temperature offset calibration is only needed for runtime ucode,
* so prepare the value now.
*/
if (priv->cfg->need_temp_offset_calib)
- iwlagn_set_temperature_offset_calib(priv);
+ return iwlagn_set_temperature_offset_calib(priv);
- return;
-
-restart:
- /* real restart (first load init_ucode) */
- queue_work(priv->workqueue, &priv->restart);
+ return 0;
}
static int iwlagn_send_wimax_coex(struct iwl_priv *priv)
@@ -413,25 +362,30 @@
IWL_ERR(priv, "failed to send BT prio tbl command\n");
}
-void iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+int iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
{
struct iwl_bt_coex_prot_env_cmd env_cmd;
+ int ret;
env_cmd.action = action;
env_cmd.type = type;
- if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
- sizeof(env_cmd), &env_cmd))
+ ret = iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
+ sizeof(env_cmd), &env_cmd);
+ if (ret)
IWL_ERR(priv, "failed to send BT env command\n");
+ return ret;
}
-int iwlagn_alive_notify(struct iwl_priv *priv)
+static int iwlagn_alive_notify(struct iwl_priv *priv)
{
const struct queue_to_fifo_ac *queue_to_fifo;
+ struct iwl_rxon_context *ctx;
u32 a;
unsigned long flags;
int i, chan;
u32 reg_val;
+ int ret;
spin_lock_irqsave(&priv->lock, flags);
@@ -500,6 +454,8 @@
memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
for (i = 0; i < 4; i++)
atomic_set(&priv->queue_stop_count[i], 0);
+ for_each_context(priv, ctx)
+ ctx->last_tx_rejected = false;
/* reset to 0 to enable all the queue first */
priv->txq_ctx_active_msk = 0;
@@ -527,12 +483,15 @@
iwl_clear_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
- iwlagn_send_wimax_coex(priv);
+ ret = iwlagn_send_wimax_coex(priv);
+ if (ret)
+ return ret;
- iwlagn_set_Xtal_calib(priv);
- iwl_send_calib_results(priv);
+ ret = iwlagn_set_Xtal_calib(priv);
+ if (ret)
+ return ret;
- return 0;
+ return iwl_send_calib_results(priv);
}
@@ -541,11 +500,12 @@
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
*/
-static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
+static int iwlcore_verify_inst_sparse(struct iwl_priv *priv,
+ struct fw_desc *fw_desc)
{
+ __le32 *image = (__le32 *)fw_desc->v_addr;
+ u32 len = fw_desc->len;
u32 val;
- int ret = 0;
- u32 errcnt = 0;
u32 i;
IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
@@ -556,104 +516,204 @@
* if IWL_DL_IO is set */
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
i + IWLAGN_RTC_INST_LOWER_BOUND);
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
- ret = -EIO;
- errcnt++;
- if (errcnt >= 3)
- break;
- }
+ val = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
+ if (val != le32_to_cpu(*image))
+ return -EIO;
}
- return ret;
+ return 0;
}
-/**
- * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
- * looking at all data.
- */
-static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
- u32 len)
+static void iwl_print_mismatch_inst(struct iwl_priv *priv,
+ struct fw_desc *fw_desc)
{
+ __le32 *image = (__le32 *)fw_desc->v_addr;
+ u32 len = fw_desc->len;
u32 val;
- u32 save_len = len;
- int ret = 0;
- u32 errcnt;
+ u32 offs;
+ int errors = 0;
IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
IWLAGN_RTC_INST_LOWER_BOUND);
- errcnt = 0;
- for (; len > 0; len -= sizeof(u32), image++) {
+ for (offs = 0;
+ offs < len && errors < 20;
+ offs += sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IWL_DL_IO is set */
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ val = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- save_len - len, val, le32_to_cpu(*image));
- ret = -EIO;
- errcnt++;
- if (errcnt >= 20)
- break;
+ IWL_ERR(priv, "uCode INST section at "
+ "offset 0x%x, is 0x%x, s/b 0x%x\n",
+ offs, val, le32_to_cpu(*image));
+ errors++;
}
}
-
- if (!errcnt)
- IWL_DEBUG_INFO(priv,
- "ucode image in INSTRUCTION memory is good\n");
-
- return ret;
}
/**
* iwl_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
-int iwl_verify_ucode(struct iwl_priv *priv)
+static int iwl_verify_ucode(struct iwl_priv *priv, struct fw_img *img)
{
- __le32 *image;
- u32 len;
+ if (!iwlcore_verify_inst_sparse(priv, &img->code)) {
+ IWL_DEBUG_INFO(priv, "uCode is good in inst SRAM\n");
+ return 0;
+ }
+
+ IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n");
+
+ iwl_print_mismatch_inst(priv, &img->code);
+ return -EIO;
+}
+
+struct iwlagn_alive_data {
+ bool valid;
+ u8 subtype;
+};
+
+static void iwlagn_alive_fn(struct iwl_priv *priv,
+ struct iwl_rx_packet *pkt,
+ void *data)
+{
+ struct iwlagn_alive_data *alive_data = data;
+ struct iwl_alive_resp *palive;
+
+ palive = &pkt->u.alive_frame;
+
+ IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
+ "0x%01X 0x%01X\n",
+ palive->is_valid, palive->ver_type,
+ palive->ver_subtype);
+
+ priv->device_pointers.error_event_table =
+ le32_to_cpu(palive->error_event_table_ptr);
+ priv->device_pointers.log_event_table =
+ le32_to_cpu(palive->log_event_table_ptr);
+
+ alive_data->subtype = palive->ver_subtype;
+ alive_data->valid = palive->is_valid == UCODE_VALID_OK;
+}
+
+#define UCODE_ALIVE_TIMEOUT HZ
+#define UCODE_CALIB_TIMEOUT (2*HZ)
+
+int iwlagn_load_ucode_wait_alive(struct iwl_priv *priv,
+ struct fw_img *image,
+ int subtype, int alternate_subtype)
+{
+ struct iwl_notification_wait alive_wait;
+ struct iwlagn_alive_data alive_data;
+ int ret;
+ enum iwlagn_ucode_subtype old_type;
+
+ ret = iwlagn_start_device(priv);
+ if (ret)
+ return ret;
+
+ iwlagn_init_notification_wait(priv, &alive_wait, REPLY_ALIVE,
+ iwlagn_alive_fn, &alive_data);
+
+ old_type = priv->ucode_type;
+ priv->ucode_type = subtype;
+
+ ret = iwlagn_load_given_ucode(priv, image);
+ if (ret) {
+ priv->ucode_type = old_type;
+ iwlagn_remove_notification(priv, &alive_wait);
+ return ret;
+ }
+
+ /* Remove all resets to allow NIC to operate */
+ iwl_write32(priv, CSR_RESET, 0);
+
+ /*
+ * Some things may run in the background now, but we
+ * just wait for the ALIVE notification here.
+ */
+ ret = iwlagn_wait_notification(priv, &alive_wait, UCODE_ALIVE_TIMEOUT);
+ if (ret) {
+ priv->ucode_type = old_type;
+ return ret;
+ }
+
+ if (!alive_data.valid) {
+ IWL_ERR(priv, "Loaded ucode is not valid!\n");
+ priv->ucode_type = old_type;
+ return -EIO;
+ }
+
+ if (alive_data.subtype != subtype &&
+ alive_data.subtype != alternate_subtype) {
+ IWL_ERR(priv,
+ "Loaded ucode is not expected type (got %d, expected %d)!\n",
+ alive_data.subtype, subtype);
+ priv->ucode_type = old_type;
+ return -EIO;
+ }
+
+ ret = iwl_verify_ucode(priv, image);
+ if (ret) {
+ priv->ucode_type = old_type;
+ return ret;
+ }
+
+ /* delay a bit to give rfkill time to run */
+ msleep(5);
+
+ ret = iwlagn_alive_notify(priv);
+ if (ret) {
+ IWL_WARN(priv,
+ "Could not complete ALIVE transition: %d\n", ret);
+ priv->ucode_type = old_type;
+ return ret;
+ }
+
+ return 0;
+}
+
+int iwlagn_run_init_ucode(struct iwl_priv *priv)
+{
+ struct iwl_notification_wait calib_wait;
int ret;
- /* Try bootstrap */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- ret = iwlcore_verify_inst_sparse(priv, image, len);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
+ lockdep_assert_held(&priv->mutex);
+
+ /* No init ucode required? Curious, but maybe ok */
+ if (!priv->ucode_init.code.len)
return 0;
- }
- /* Try initialize */
- image = (__le32 *)priv->ucode_init.v_addr;
- len = priv->ucode_init.len;
- ret = iwlcore_verify_inst_sparse(priv, image, len);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
+ if (priv->ucode_type != UCODE_SUBTYPE_NONE_LOADED)
return 0;
- }
- /* Try runtime/protocol */
- image = (__le32 *)priv->ucode_code.v_addr;
- len = priv->ucode_code.len;
- ret = iwlcore_verify_inst_sparse(priv, image, len);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
- return 0;
- }
+ iwlagn_init_notification_wait(priv, &calib_wait,
+ CALIBRATION_COMPLETE_NOTIFICATION,
+ NULL, NULL);
- IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
+ /* Will also start the device */
+ ret = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_init,
+ UCODE_SUBTYPE_INIT, -1);
+ if (ret)
+ goto error;
- /* Since nothing seems to match, show first several data entries in
- * instruction SRAM, so maybe visual inspection will give a clue.
- * Selection of bootstrap image (vs. other images) is arbitrary. */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- ret = iwl_verify_inst_full(priv, image, len);
+ ret = iwlagn_init_alive_start(priv);
+ if (ret)
+ goto error;
+ /*
+ * Some things may run in the background now, but we
+ * just wait for the calibration complete notification.
+ */
+ ret = iwlagn_wait_notification(priv, &calib_wait, UCODE_CALIB_TIMEOUT);
+
+ goto out;
+
+ error:
+ iwlagn_remove_notification(priv, &calib_wait);
+ out:
+ /* Whatever happened, stop the device */
+ iwlagn_stop_device(priv);
return ret;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 321b18b..3ecc319 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -59,7 +59,6 @@
#include "iwl-sta.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
-#include "iwl-agn-led.h"
/******************************************************************************
@@ -103,70 +102,6 @@
}
}
-static void iwl_clear_free_frames(struct iwl_priv *priv)
-{
- struct list_head *element;
-
- IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
- priv->frames_count);
-
- while (!list_empty(&priv->free_frames)) {
- element = priv->free_frames.next;
- list_del(element);
- kfree(list_entry(element, struct iwl_frame, list));
- priv->frames_count--;
- }
-
- if (priv->frames_count) {
- IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
- priv->frames_count);
- priv->frames_count = 0;
- }
-}
-
-static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
-{
- struct iwl_frame *frame;
- struct list_head *element;
- if (list_empty(&priv->free_frames)) {
- frame = kzalloc(sizeof(*frame), GFP_KERNEL);
- if (!frame) {
- IWL_ERR(priv, "Could not allocate frame!\n");
- return NULL;
- }
-
- priv->frames_count++;
- return frame;
- }
-
- element = priv->free_frames.next;
- list_del(element);
- return list_entry(element, struct iwl_frame, list);
-}
-
-static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
-{
- memset(frame, 0, sizeof(*frame));
- list_add(&frame->list, &priv->free_frames);
-}
-
-static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,
- int left)
-{
- lockdep_assert_held(&priv->mutex);
-
- if (!priv->beacon_skb)
- return 0;
-
- if (priv->beacon_skb->len > left)
- return 0;
-
- memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
-
- return priv->beacon_skb->len;
-}
-
/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
static void iwl_set_beacon_tim(struct iwl_priv *priv,
struct iwl_tx_beacon_cmd *tx_beacon_cmd,
@@ -194,13 +129,18 @@
IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
}
-static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
- struct iwl_frame *frame)
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
{
struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_TX_BEACON,
+ .flags = CMD_SIZE_HUGE,
+ };
u32 frame_size;
u32 rate_flags;
u32 rate;
+ int err;
+
/*
* We have to set up the TX command, the TX Beacon command, and the
* beacon contents.
@@ -213,17 +153,19 @@
return 0;
}
- /* Initialize memory */
- tx_beacon_cmd = &frame->u.beacon;
- memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+ if (WARN_ON(!priv->beacon_skb))
+ return -EINVAL;
+
+ /* Allocate beacon memory */
+ tx_beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd) + priv->beacon_skb->len,
+ GFP_KERNEL);
+ if (!tx_beacon_cmd)
+ return -ENOMEM;
+
+ frame_size = priv->beacon_skb->len;
/* Set up TX beacon contents */
- frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
- sizeof(frame->u) - sizeof(*tx_beacon_cmd));
- if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
- return 0;
- if (!frame_size)
- return 0;
+ memcpy(tx_beacon_cmd->frame, priv->beacon_skb->data, frame_size);
/* Set up TX command fields */
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
@@ -246,35 +188,16 @@
tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
rate_flags);
- return sizeof(*tx_beacon_cmd) + frame_size;
-}
+ /* Submit command */
+ cmd.len = sizeof(*tx_beacon_cmd) + frame_size;
+ cmd.data = tx_beacon_cmd;
-int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
-{
- struct iwl_frame *frame;
- unsigned int frame_size;
- int rc;
+ err = iwl_send_cmd_sync(priv, &cmd);
- frame = iwl_get_free_frame(priv);
- if (!frame) {
- IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
- "command.\n");
- return -ENOMEM;
- }
+ /* Free temporary storage */
+ kfree(tx_beacon_cmd);
- frame_size = iwl_hw_get_beacon_cmd(priv, frame);
- if (!frame_size) {
- IWL_ERR(priv, "Error configuring the beacon command\n");
- iwl_free_frame(priv, frame);
- return -EINVAL;
- }
-
- rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
- &frame->u.cmd[0]);
-
- iwl_free_frame(priv, frame);
-
- return rc;
+ return err;
}
static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
@@ -395,7 +318,9 @@
return -EINVAL;
}
- BUG_ON(addr & ~DMA_BIT_MASK(36));
+ if (WARN_ON(addr & ~DMA_BIT_MASK(36)))
+ return -EINVAL;
+
if (unlikely(addr & ~IWL_TX_DMA_MASK))
IWL_ERR(priv, "Unaligned address = %llx\n",
(unsigned long long)addr);
@@ -409,7 +334,7 @@
* Tell nic where to find circular buffer of Tx Frame Descriptors for
* given Tx queue, and enable the DMA channel used for that queue.
*
- * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
+ * supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
* channels supported in hardware.
*/
int iwl_hw_tx_queue_init(struct iwl_priv *priv,
@@ -483,12 +408,14 @@
container_of(work, struct iwl_priv, bt_full_concurrency);
struct iwl_rxon_context *ctx;
+ mutex_lock(&priv->mutex);
+
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
+ goto out;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv))
- return;
+ goto out;
IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
priv->bt_full_concurrent ?
@@ -498,15 +425,15 @@
* LQ & RXON updated cmds must be sent before BT Config cmd
* to avoid 3-wire collisions
*/
- mutex_lock(&priv->mutex);
for_each_context(priv, ctx) {
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
iwlcore_commit_rxon(priv, ctx);
}
- mutex_unlock(&priv->mutex);
priv->cfg->ops->hcmd->send_bt_config(priv);
+out:
+ mutex_unlock(&priv->mutex);
}
/**
@@ -556,7 +483,7 @@
}
/* Set starting address; reads will auto-increment */
- _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
+ iwl_write32(priv, HBUS_TARG_MEM_RADDR, ptr);
rmb();
/*
@@ -564,13 +491,13 @@
* place event id # at far right for easier visual parsing.
*/
for (i = 0; i < num_events; i++) {
- ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ ev = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
+ time = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
if (mode == 0) {
trace_iwlwifi_dev_ucode_cont_event(priv,
0, time, ev);
} else {
- data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ data = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
trace_iwlwifi_dev_ucode_cont_event(priv,
time, data, ev);
}
@@ -588,10 +515,7 @@
u32 num_wraps; /* # times uCode wrapped to top of log */
u32 next_entry; /* index of next entry to be written by uCode */
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+ base = priv->device_pointers.error_event_table;
if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
capacity = iwl_read_targ_mem(priv, base);
num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
@@ -720,7 +644,10 @@
/* If an RXB doesn't have a Rx queue slot associated with it,
* then a bug has been introduced in the queue refilling
* routines -- catch it here */
- BUG_ON(rxb == NULL);
+ if (WARN_ON(rxb == NULL)) {
+ i = (i + 1) & RX_QUEUE_MASK;
+ continue;
+ }
rxq->queue[i] = NULL;
@@ -760,13 +687,15 @@
if (w->cmd == pkt->hdr.cmd) {
w->triggered = true;
if (w->fn)
- w->fn(priv, pkt);
+ w->fn(priv, pkt, w->fn_data);
}
}
spin_unlock(&priv->_agn.notif_wait_lock);
wake_up_all(&priv->_agn.notif_waitq);
}
+ if (priv->pre_rx_handler)
+ priv->pre_rx_handler(priv, rxb);
/* Based on type of command response or notification,
* handle those that need handling via function in
@@ -837,199 +766,6 @@
iwlagn_rx_queue_restock(priv);
}
-/* call this function to flush any scheduled tasklet */
-static inline void iwl_synchronize_irq(struct iwl_priv *priv)
-{
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(priv->pci_dev->irq);
- tasklet_kill(&priv->irq_tasklet);
-}
-
-static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
-{
- u32 inta, handled = 0;
- u32 inta_fh;
- unsigned long flags;
- u32 i;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- * and will clear only when CSR_FH_INT_STATUS gets cleared. */
- inta = iwl_read32(priv, CSR_INT);
- iwl_write32(priv, CSR_INT, inta);
-
- /* Ack/clear/reset pending flow-handler (DMA) interrupts.
- * Any new interrupts that happen after this, either while we're
- * in this tasklet, or later, will show up in next ISR/tasklet. */
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
- /* just for debug */
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
- }
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
- * atomic, make sure that inta covers all the interrupts that
- * we've discovered, even if FH interrupt came in just after
- * reading CSR_INT. */
- if (inta_fh & CSR49_FH_INT_RX_MASK)
- inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR49_FH_INT_TX_MASK)
- inta |= CSR_INT_BIT_FH_TX;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- iwl_disable_interrupts(priv);
-
- priv->isr_stats.hw++;
- iwl_irq_handle_error(priv);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
- "the frame/frames.\n");
- priv->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- IWL_DEBUG_ISR(priv, "Alive interrupt\n");
- priv->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* HW RF KILL switch toggled */
- if (inta & CSR_INT_BIT_RF_KILL) {
- int hw_rf_kill = 0;
- if (!(iwl_read32(priv, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
- hw_rf_kill = 1;
-
- IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
- hw_rf_kill ? "disable radio" : "enable radio");
-
- priv->isr_stats.rfkill++;
-
- /* driver only loads ucode once setting the interface up.
- * the driver allows loading the ucode even if the radio
- * is killed. Hence update the killswitch state here. The
- * rfkill handler will care about restarting if needed.
- */
- if (!test_bit(STATUS_ALIVE, &priv->status)) {
- if (hw_rf_kill)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
- }
-
- handled |= CSR_INT_BIT_RF_KILL;
- }
-
- /* Chip got too hot and stopped itself */
- if (inta & CSR_INT_BIT_CT_KILL) {
- IWL_ERR(priv, "Microcode CT kill error detected.\n");
- priv->isr_stats.ctkill++;
- handled |= CSR_INT_BIT_CT_KILL;
- }
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IWL_ERR(priv, "Microcode SW error detected. "
- " Restarting 0x%X.\n", inta);
- priv->isr_stats.sw++;
- iwl_irq_handle_error(priv);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /*
- * uCode wakes up after power-down sleep.
- * Tell device about any new tx or host commands enqueued,
- * and about any Rx buffers made available while asleep.
- */
- if (inta & CSR_INT_BIT_WAKEUP) {
- IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
- iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
- for (i = 0; i < priv->hw_params.max_txq_num; i++)
- iwl_txq_update_write_ptr(priv, &priv->txq[i]);
- priv->isr_stats.wakeup++;
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- iwl_rx_handle(priv);
- priv->isr_stats.rx++;
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- }
-
- /* This "Tx" DMA channel is used only for loading uCode */
- if (inta & CSR_INT_BIT_FH_TX) {
- IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
- priv->isr_stats.tx++;
- handled |= CSR_INT_BIT_FH_TX;
- /* Wake up uCode load routine, now that load is complete */
- priv->ucode_write_complete = 1;
- wake_up_interruptible(&priv->wait_command_queue);
- }
-
- if (inta & ~handled) {
- IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
- priv->isr_stats.unhandled++;
- }
-
- if (inta & ~(priv->inta_mask)) {
- IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
- inta & ~priv->inta_mask);
- IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
- /* Re-enable RF_KILL if it occurred */
- else if (handled & CSR_INT_BIT_RF_KILL)
- iwl_enable_rfkill_int(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- inta = iwl_read32(priv, CSR_INT);
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
- "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
- }
-#endif
-}
-
/* tasklet for iwlagn interrupt */
static void iwl_irq_tasklet(struct iwl_priv *priv)
{
@@ -1171,7 +907,7 @@
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
iwl_write32(priv, CSR_FH_INT_STATUS,
- CSR49_FH_INT_RX_MASK);
+ CSR_FH_INT_RX_MASK);
}
if (inta & CSR_INT_BIT_RX_PERIODIC) {
handled |= CSR_INT_BIT_RX_PERIODIC;
@@ -1209,7 +945,7 @@
/* This "Tx" DMA channel is used only for loading uCode */
if (inta & CSR_INT_BIT_FH_TX) {
- iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
+ iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
priv->isr_stats.tx++;
handled |= CSR_INT_BIT_FH_TX;
@@ -1357,26 +1093,48 @@
*
******************************************************************************/
-static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
+static void iwl_free_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
{
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
+ if (desc->v_addr)
+ dma_free_coherent(&pci_dev->dev, desc->len,
+ desc->v_addr, desc->p_addr);
+ desc->v_addr = NULL;
+ desc->len = 0;
}
-static void iwl_nic_start(struct iwl_priv *priv)
+static void iwl_free_fw_img(struct pci_dev *pci_dev, struct fw_img *img)
{
- /* Remove all resets to allow NIC to operate */
- iwl_write32(priv, CSR_RESET, 0);
+ iwl_free_fw_desc(pci_dev, &img->code);
+ iwl_free_fw_desc(pci_dev, &img->data);
+}
+
+static int iwl_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc,
+ const void *data, size_t len)
+{
+ if (!len) {
+ desc->v_addr = NULL;
+ return -EINVAL;
+ }
+
+ desc->v_addr = dma_alloc_coherent(&pci_dev->dev, len,
+ &desc->p_addr, GFP_KERNEL);
+ if (!desc->v_addr)
+ return -ENOMEM;
+ desc->len = len;
+ memcpy(desc->v_addr, data, len);
+ return 0;
+}
+
+static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
+{
+ iwl_free_fw_img(priv->pci_dev, &priv->ucode_rt);
+ iwl_free_fw_img(priv->pci_dev, &priv->ucode_init);
}
struct iwlagn_ucode_capabilities {
u32 max_probe_length;
u32 standard_phy_calibration_size;
- bool pan;
+ u32 flags;
};
static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
@@ -1422,8 +1180,8 @@
}
struct iwlagn_firmware_pieces {
- const void *inst, *data, *init, *init_data, *boot;
- size_t inst_size, data_size, init_size, init_data_size, boot_size;
+ const void *inst, *data, *init, *init_data;
+ size_t inst_size, data_size, init_size, init_data_size;
u32 build;
@@ -1444,28 +1202,18 @@
switch (api_ver) {
default:
- /*
- * 4965 doesn't revision the firmware file format
- * along with the API version, it always uses v1
- * file format.
- */
- if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) !=
- CSR_HW_REV_TYPE_4965) {
- hdr_size = 28;
- if (ucode_raw->size < hdr_size) {
- IWL_ERR(priv, "File size too small!\n");
- return -EINVAL;
- }
- pieces->build = le32_to_cpu(ucode->u.v2.build);
- pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
- pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
- pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
- pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
- pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
- src = ucode->u.v2.data;
- break;
+ hdr_size = 28;
+ if (ucode_raw->size < hdr_size) {
+ IWL_ERR(priv, "File size too small!\n");
+ return -EINVAL;
}
- /* fall through for 4965 */
+ pieces->build = le32_to_cpu(ucode->u.v2.build);
+ pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
+ pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
+ pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
+ pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
+ src = ucode->u.v2.data;
+ break;
case 0:
case 1:
case 2:
@@ -1479,7 +1227,6 @@
pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
- pieces->boot_size = le32_to_cpu(ucode->u.v1.boot_size);
src = ucode->u.v1.data;
break;
}
@@ -1487,7 +1234,7 @@
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size != hdr_size + pieces->inst_size +
pieces->data_size + pieces->init_size +
- pieces->init_data_size + pieces->boot_size) {
+ pieces->init_data_size) {
IWL_ERR(priv,
"uCode file size %d does not match expected size\n",
@@ -1503,8 +1250,6 @@
src += pieces->init_size;
pieces->init_data = src;
src += pieces->init_data_size;
- pieces->boot = src;
- src += pieces->boot_size;
return 0;
}
@@ -1605,8 +1350,7 @@
pieces->init_data_size = tlv_len;
break;
case IWL_UCODE_TLV_BOOT:
- pieces->boot = tlv_data;
- pieces->boot_size = tlv_len;
+ IWL_ERR(priv, "Found unexpected BOOT ucode\n");
break;
case IWL_UCODE_TLV_PROBE_MAX_LEN:
if (tlv_len != sizeof(u32))
@@ -1617,7 +1361,23 @@
case IWL_UCODE_TLV_PAN:
if (tlv_len)
goto invalid_tlv_len;
- capa->pan = true;
+ capa->flags |= IWL_UCODE_TLV_FLAGS_PAN;
+ break;
+ case IWL_UCODE_TLV_FLAGS:
+ /* must be at least one u32 */
+ if (tlv_len < sizeof(u32))
+ goto invalid_tlv_len;
+ /* and a proper number of u32s */
+ if (tlv_len % sizeof(u32))
+ goto invalid_tlv_len;
+ /*
+ * This driver only reads the first u32 as
+ * right now no more features are defined,
+ * if that changes then either the driver
+ * will not work with the new firmware, or
+ * it'll not take advantage of new features.
+ */
+ capa->flags = le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
if (tlv_len != sizeof(u32))
@@ -1667,7 +1427,7 @@
le32_to_cpup((__le32 *)tlv_data);
break;
default:
- IWL_WARN(priv, "unknown TLV: %d\n", tlv_type);
+ IWL_DEBUG_INFO(priv, "unknown TLV: %d\n", tlv_type);
break;
}
}
@@ -1806,8 +1566,6 @@
pieces.init_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
pieces.init_data_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %Zd\n",
- pieces.boot_size);
/* Verify that uCode images will fit in card's SRAM */
if (pieces.inst_size > priv->hw_params.max_inst_size) {
@@ -1834,48 +1592,25 @@
goto try_again;
}
- if (pieces.boot_size > priv->hw_params.max_bsm_size) {
- IWL_ERR(priv, "uCode boot instr len %Zd too large to fit in\n",
- pieces.boot_size);
- goto try_again;
- }
-
/* Allocate ucode buffers for card's bus-master loading ... */
/* Runtime instructions and 2 copies of data:
* 1) unmodified from disk
* 2) backup cache for save/restore during power-downs */
- priv->ucode_code.len = pieces.inst_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
-
- priv->ucode_data.len = pieces.data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
-
- priv->ucode_data_backup.len = pieces.data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-
- if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
- !priv->ucode_data_backup.v_addr)
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_rt.code,
+ pieces.inst, pieces.inst_size))
+ goto err_pci_alloc;
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_rt.data,
+ pieces.data, pieces.data_size))
goto err_pci_alloc;
/* Initialization instructions and data */
if (pieces.init_size && pieces.init_data_size) {
- priv->ucode_init.len = pieces.init_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
-
- priv->ucode_init_data.len = pieces.init_data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-
- if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init.code,
+ pieces.init, pieces.init_size))
goto err_pci_alloc;
- }
-
- /* Bootstrap (instructions only, no data) */
- if (pieces.boot_size) {
- priv->ucode_boot.len = pieces.boot_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
-
- if (!priv->ucode_boot.v_addr)
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init.data,
+ pieces.init_data, pieces.init_data_size))
goto err_pci_alloc;
}
@@ -1901,50 +1636,19 @@
priv->cfg->base_params->max_event_log_size;
priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr;
- if (ucode_capa.pan) {
+ priv->new_scan_threshold_behaviour =
+ !!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
+
+ if (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
} else
priv->sta_key_max_num = STA_KEY_MAX_NUM;
- /* Copy images into buffers for card's bus-master reads ... */
-
- /* Runtime instructions (first block of data in file) */
- IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n",
- pieces.inst_size);
- memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size);
-
- IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
- priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
-
- /*
- * Runtime data
- * NOTE: Copy into backup buffer will be done in iwl_up()
- */
- IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n",
- pieces.data_size);
- memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size);
- memcpy(priv->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
-
- /* Initialization instructions */
- if (pieces.init_size) {
- IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
- pieces.init_size);
- memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size);
- }
-
- /* Initialization data */
- if (pieces.init_data_size) {
- IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
- pieces.init_data_size);
- memcpy(priv->ucode_init_data.v_addr, pieces.init_data,
- pieces.init_data_size);
- }
-
- /* Bootstrap instructions */
- IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n",
- pieces.boot_size);
- memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
+ if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))
+ priv->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
+ else
+ priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
/*
* figure out the offset of chain noise reset and gain commands
@@ -2076,13 +1780,13 @@
u32 desc, time, count, base, data1;
u32 blink1, blink2, ilink1, ilink2;
u32 pc, hcmd;
+ struct iwl_error_event_table table;
- if (priv->ucode_type == UCODE_INIT) {
- base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+ base = priv->device_pointers.error_event_table;
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT) {
if (!base)
base = priv->_agn.init_errlog_ptr;
} else {
- base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
if (!base)
base = priv->_agn.inst_errlog_ptr;
}
@@ -2090,11 +1794,15 @@
if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Not valid error log pointer 0x%08X for %s uCode\n",
- base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
+ base,
+ (priv->ucode_type == UCODE_SUBTYPE_INIT)
+ ? "Init" : "RT");
return;
}
- count = iwl_read_targ_mem(priv, base);
+ iwl_read_targ_mem_words(priv, base, &table, sizeof(table));
+
+ count = table.valid;
if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
IWL_ERR(priv, "Start IWL Error Log Dump:\n");
@@ -2102,18 +1810,18 @@
priv->status, count);
}
- desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+ desc = table.error_id;
priv->isr_stats.err_code = desc;
- pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32));
- blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
- blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
- ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
- ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
- data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
- data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
- line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
- time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
- hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32));
+ pc = table.pc;
+ blink1 = table.blink1;
+ blink2 = table.blink2;
+ ilink1 = table.ilink1;
+ ilink2 = table.ilink2;
+ data1 = table.data1;
+ data2 = table.data2;
+ line = table.line;
+ time = table.tsf_low;
+ hcmd = table.hcmd;
trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
blink1, blink2, ilink1, ilink2);
@@ -2147,12 +1855,11 @@
if (num_events == 0)
return pos;
- if (priv->ucode_type == UCODE_INIT) {
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ base = priv->device_pointers.log_event_table;
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT) {
if (!base)
base = priv->_agn.init_evtlog_ptr;
} else {
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
if (!base)
base = priv->_agn.inst_evtlog_ptr;
}
@@ -2169,14 +1876,14 @@
iwl_grab_nic_access(priv);
/* Set starting address; reads will auto-increment */
- _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
+ iwl_write32(priv, HBUS_TARG_MEM_RADDR, ptr);
rmb();
/* "time" is actually "data" for mode 0 (no timestamp).
* place event id # at far right for easier visual parsing. */
for (i = 0; i < num_events; i++) {
- ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ ev = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
+ time = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
if (mode == 0) {
/* data, ev */
if (bufsz) {
@@ -2190,7 +1897,7 @@
time, ev);
}
} else {
- data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ data = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
if (bufsz) {
pos += scnprintf(*buf + pos, bufsz - pos,
"EVT_LOGT:%010u:0x%08x:%04u\n",
@@ -2261,13 +1968,12 @@
int pos = 0;
size_t bufsz = 0;
- if (priv->ucode_type == UCODE_INIT) {
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ base = priv->device_pointers.log_event_table;
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT) {
logsize = priv->_agn.init_evtlog_size;
if (!base)
base = priv->_agn.init_evtlog_ptr;
} else {
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
logsize = priv->_agn.inst_evtlog_size;
if (!base)
base = priv->_agn.inst_evtlog_ptr;
@@ -2276,7 +1982,9 @@
if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Invalid event log pointer 0x%08X for %s uCode\n",
- base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
+ base,
+ (priv->ucode_type == UCODE_SUBTYPE_INIT)
+ ? "Init" : "RT");
return -EINVAL;
}
@@ -2423,31 +2131,15 @@
* from protocol/runtime uCode (initialization uCode's
* Alive gets handled by iwl_init_alive_start()).
*/
-static void iwl_alive_start(struct iwl_priv *priv)
+int iwl_alive_start(struct iwl_priv *priv)
{
int ret = 0;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ iwl_reset_ict(priv);
+
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
- /* Initialize uCode has loaded Runtime uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "runtime" alive if code weren't properly loaded. */
- if (iwl_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
- goto restart;
- }
-
- ret = priv->cfg->ops->lib->alive_notify(priv);
- if (ret) {
- IWL_WARN(priv,
- "Could not complete ALIVE transition [ntf]: %d\n", ret);
- goto restart;
- }
-
-
/* After the ALIVE response, we can send host commands to the uCode */
set_bit(STATUS_ALIVE, &priv->status);
@@ -2455,7 +2147,7 @@
iwl_setup_watchdog(priv);
if (iwl_is_rfkill(priv))
- return;
+ return -ERFKILL;
/* download priority table before any calibration request */
if (priv->cfg->bt_params &&
@@ -2469,10 +2161,14 @@
iwlagn_send_prio_tbl(priv);
/* FIXME: w/a to force change uCode BT state machine */
- iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
- BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
- iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
- BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+ BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ if (ret)
+ return ret;
+ ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
+ BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ if (ret)
+ return ret;
}
if (priv->hw_params.calib_rt_cfg)
iwlagn_send_calib_cfg_rt(priv, priv->hw_params.calib_rt_cfg);
@@ -2514,30 +2210,23 @@
set_bit(STATUS_READY, &priv->status);
/* Configure the adapter for unassociated operation */
- iwlcore_commit_rxon(priv, ctx);
+ ret = iwlcore_commit_rxon(priv, ctx);
+ if (ret)
+ return ret;
/* At this point, the NIC is initialized and operational */
iwl_rf_kill_ct_config(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
- iwl_power_update_mode(priv, true);
- IWL_DEBUG_INFO(priv, "Updated power mode\n");
-
-
- return;
-
- restart:
- queue_work(priv->workqueue, &priv->restart);
+ return iwl_power_update_mode(priv, true);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv);
static void __iwl_down(struct iwl_priv *priv)
{
- unsigned long flags;
- int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
+ int exit_pending;
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
@@ -2563,40 +2252,15 @@
priv->bt_full_concurrent = false;
priv->bt_ci_compliance = 0;
- /* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
-
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
clear_bit(STATUS_EXIT_PENDING, &priv->status);
- /* stop and reset the on-board processor */
- iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- iwl_synchronize_irq(priv);
-
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
- /* If we have not previously called iwl_init() then
- * clear all bits but the RF Kill bit and return */
- if (!iwl_is_init(priv)) {
- priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
- STATUS_EXIT_PENDING;
- goto exit;
- }
-
- /* ...otherwise clear out all the status bits but the RF Kill
- * bit and continue taking the NIC down. */
+ /* Clear out all status bits but a few that are stable across reset */
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
@@ -2606,31 +2270,10 @@
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
- /* device going down, Stop using ICT table */
- if (priv->cfg->ops->lib->isr_ops.disable)
- priv->cfg->ops->lib->isr_ops.disable(priv);
-
- iwlagn_txq_ctx_stop(priv);
- iwlagn_rxq_stop(priv);
-
- /* Power-down device's busmaster DMA clocks */
- iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
- udelay(5);
-
- /* Make sure (redundant) we've released our request to stay awake */
- iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
- /* Stop the device, and put it in low power state */
- iwl_apm_stop(priv);
-
- exit:
- memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
+ iwlagn_stop_device(priv);
dev_kfree_skb(priv->beacon_skb);
priv->beacon_skb = NULL;
-
- /* clear out any free frames */
- iwl_clear_free_frames(priv);
}
static void iwl_down(struct iwl_priv *priv)
@@ -2644,9 +2287,10 @@
#define HW_READY_TIMEOUT (50)
+/* Note: returns poll_bit return value, which is >= 0 if success */
static int iwl_set_hw_ready(struct iwl_priv *priv)
{
- int ret = 0;
+ int ret;
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
@@ -2656,25 +2300,21 @@
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
HW_READY_TIMEOUT);
- if (ret != -ETIMEDOUT)
- priv->hw_ready = true;
- else
- priv->hw_ready = false;
- IWL_DEBUG_INFO(priv, "hardware %s\n",
- (priv->hw_ready == 1) ? "ready" : "not ready");
+ IWL_DEBUG_INFO(priv, "hardware%s ready\n", ret < 0 ? " not" : "");
return ret;
}
-static int iwl_prepare_card_hw(struct iwl_priv *priv)
+/* Note: returns standard 0/-ERROR code */
+int iwl_prepare_card_hw(struct iwl_priv *priv)
{
- int ret = 0;
+ int ret;
IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
ret = iwl_set_hw_ready(priv);
- if (priv->hw_ready)
- return ret;
+ if (ret >= 0)
+ return 0;
/* If HW is not ready, prepare the conditions to check again */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
@@ -2684,10 +2324,13 @@
~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
- /* HW should be ready by now, check again. */
- if (ret != -ETIMEDOUT)
- iwl_set_hw_ready(priv);
+ if (ret < 0)
+ return ret;
+ /* HW should be ready by now, check again. */
+ ret = iwl_set_hw_ready(priv);
+ if (ret >= 0)
+ return 0;
return ret;
}
@@ -2696,19 +2339,15 @@
static int __iwl_up(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
- int i;
int ret;
+ lockdep_assert_held(&priv->mutex);
+
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
- if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
- IWL_ERR(priv, "ucode not available for device bringup\n");
- return -EIO;
- }
-
for_each_context(priv, ctx) {
ret = iwlagn_alloc_bcast_station(priv, ctx);
if (ret) {
@@ -2717,89 +2356,33 @@
}
}
- iwl_prepare_card_hw(priv);
-
- if (!priv->hw_ready) {
- IWL_WARN(priv, "Exit HW not ready\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- set_bit(STATUS_RF_KILL_HW, &priv->status);
-
- if (iwl_is_rfkill(priv)) {
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
-
- iwl_enable_interrupts(priv);
- IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
- return 0;
- }
-
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
- /* must be initialised before iwl_hw_nic_init */
- if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))
- priv->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
- else
- priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
-
- ret = iwlagn_hw_nic_init(priv);
+ ret = iwlagn_run_init_ucode(priv);
if (ret) {
- IWL_ERR(priv, "Unable to init nic\n");
- return ret;
+ IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
+ goto error;
}
- /* make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl_enable_interrupts(priv);
-
- /* really make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* Copy original ucode data image from disk into backup cache.
- * This will be used to initialize the on-board processor's
- * data SRAM for a clean start when the runtime program first loads. */
- memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
- priv->ucode_data.len);
-
- for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
- /* load bootstrap state machine,
- * load bootstrap program into processor's memory,
- * prepare to load the "initialize" uCode */
- ret = priv->cfg->ops->lib->load_ucode(priv);
-
- if (ret) {
- IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
- ret);
- continue;
- }
-
- /* start card; "initialize" will load runtime ucode */
- iwl_nic_start(priv);
-
- IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
-
- return 0;
+ ret = iwlagn_load_ucode_wait_alive(priv,
+ &priv->ucode_rt,
+ UCODE_SUBTYPE_REGULAR,
+ UCODE_SUBTYPE_REGULAR_NEW);
+ if (ret) {
+ IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
+ goto error;
}
+ ret = iwl_alive_start(priv);
+ if (ret)
+ goto error;
+ return 0;
+
+ error:
set_bit(STATUS_EXIT_PENDING, &priv->status);
__iwl_down(priv);
clear_bit(STATUS_EXIT_PENDING, &priv->status);
- /* tried to restart and config the device for as long as our
- * patience could withstand */
- IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
- return -EIO;
+ IWL_ERR(priv, "Unable to initialize device.\n");
+ return ret;
}
@@ -2809,36 +2392,6 @@
*
*****************************************************************************/
-static void iwl_bg_init_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, init_alive_start.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- priv->cfg->ops->lib->init_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, alive_start.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- /* enable dram interrupt */
- if (priv->cfg->ops->lib->isr_ops.reset)
- priv->cfg->ops->lib->isr_ops.reset(priv);
-
- mutex_lock(&priv->mutex);
- iwl_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
static void iwl_bg_run_time_calib_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
@@ -2853,22 +2406,49 @@
}
if (priv->start_calib) {
- if (iwl_bt_statistics(priv)) {
- iwl_chain_noise_calibration(priv,
- (void *)&priv->_agn.statistics_bt);
- iwl_sensitivity_calibration(priv,
- (void *)&priv->_agn.statistics_bt);
- } else {
- iwl_chain_noise_calibration(priv,
- (void *)&priv->_agn.statistics);
- iwl_sensitivity_calibration(priv,
- (void *)&priv->_agn.statistics);
- }
+ iwl_chain_noise_calibration(priv);
+ iwl_sensitivity_calibration(priv);
}
mutex_unlock(&priv->mutex);
}
+static void iwlagn_prepare_restart(struct iwl_priv *priv)
+{
+ struct iwl_rxon_context *ctx;
+ bool bt_full_concurrent;
+ u8 bt_ci_compliance;
+ u8 bt_load;
+ u8 bt_status;
+
+ lockdep_assert_held(&priv->mutex);
+
+ for_each_context(priv, ctx)
+ ctx->vif = NULL;
+ priv->is_open = 0;
+
+ /*
+ * __iwl_down() will clear the BT status variables,
+ * which is correct, but when we restart we really
+ * want to keep them so restore them afterwards.
+ *
+ * The restart process will later pick them up and
+ * re-configure the hw when we reconfigure the BT
+ * command.
+ */
+ bt_full_concurrent = priv->bt_full_concurrent;
+ bt_ci_compliance = priv->bt_ci_compliance;
+ bt_load = priv->bt_traffic_load;
+ bt_status = priv->bt_status;
+
+ __iwl_down(priv);
+
+ priv->bt_full_concurrent = bt_full_concurrent;
+ priv->bt_ci_compliance = bt_ci_compliance;
+ priv->bt_traffic_load = bt_load;
+ priv->bt_status = bt_status;
+}
+
static void iwl_bg_restart(struct work_struct *data)
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
@@ -2877,50 +2457,13 @@
return;
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
- struct iwl_rxon_context *ctx;
- bool bt_full_concurrent;
- u8 bt_ci_compliance;
- u8 bt_load;
- u8 bt_status;
-
mutex_lock(&priv->mutex);
- for_each_context(priv, ctx)
- ctx->vif = NULL;
- priv->is_open = 0;
-
- /*
- * __iwl_down() will clear the BT status variables,
- * which is correct, but when we restart we really
- * want to keep them so restore them afterwards.
- *
- * The restart process will later pick them up and
- * re-configure the hw when we reconfigure the BT
- * command.
- */
- bt_full_concurrent = priv->bt_full_concurrent;
- bt_ci_compliance = priv->bt_ci_compliance;
- bt_load = priv->bt_traffic_load;
- bt_status = priv->bt_status;
-
- __iwl_down(priv);
-
- priv->bt_full_concurrent = bt_full_concurrent;
- priv->bt_ci_compliance = bt_ci_compliance;
- priv->bt_traffic_load = bt_load;
- priv->bt_status = bt_status;
-
+ iwlagn_prepare_restart(priv);
mutex_unlock(&priv->mutex);
iwl_cancel_deferred_work(priv);
ieee80211_restart_hw(priv->hw);
} else {
- iwl_down(priv);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- __iwl_up(priv);
- mutex_unlock(&priv->mutex);
+ WARN_ON(1);
}
}
@@ -3031,8 +2574,6 @@
*
*****************************************************************************/
-#define UCODE_READY_TIMEOUT (4 * HZ)
-
/*
* Not a mac80211 entry point function, but it fits in with all the
* other mac80211 functions grouped here.
@@ -3055,14 +2596,16 @@
hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
- if (!priv->cfg->base_params->broken_powersave)
- hw->flags |= IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
if (priv->cfg->sku & IWL_SKU_N)
hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+ if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP)
+ hw->flags |= IEEE80211_HW_MFP_CAPABLE;
+
hw->sta_data_size = sizeof(struct iwl_station_priv);
hw->vif_data_size = sizeof(struct iwl_vif_priv);
@@ -3112,7 +2655,7 @@
}
-int iwlagn_mac_start(struct ieee80211_hw *hw)
+static int iwlagn_mac_start(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
int ret;
@@ -3123,37 +2666,23 @@
mutex_lock(&priv->mutex);
ret = __iwl_up(priv);
mutex_unlock(&priv->mutex);
-
if (ret)
return ret;
- if (iwl_is_rfkill(priv))
- goto out;
-
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
- /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
- * mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
- test_bit(STATUS_READY, &priv->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- return -ETIMEDOUT;
- }
- }
+ /* Now we should be done, and the READY bit should be set. */
+ if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
+ ret = -EIO;
iwlagn_led_enable(priv);
-out:
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
-void iwlagn_mac_stop(struct ieee80211_hw *hw)
+static void iwlagn_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
@@ -3176,7 +2705,7 @@
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
@@ -3191,11 +2720,11 @@
IWL_DEBUG_MACDUMP(priv, "leave\n");
}
-void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_key_conf *keyconf,
- struct ieee80211_sta *sta,
- u32 iv32, u16 *phase1key)
+static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta,
+ u32 iv32, u16 *phase1key)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
@@ -3208,9 +2737,10 @@
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
+static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
@@ -3221,7 +2751,7 @@
IWL_DEBUG_MAC80211(priv, "enter\n");
- if (priv->cfg->mod_params->sw_crypto) {
+ if (iwlagn_mod_params.sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
@@ -3285,11 +2815,11 @@
return ret;
}
-int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size)
+static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size)
{
struct iwl_priv *priv = hw->priv;
int ret = -EINVAL;
@@ -3348,6 +2878,10 @@
}
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
+ buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
+
+ iwlagn_txq_agg_queue_setup(priv, sta, tid, buf_size);
+
/*
* If the limit is 0, then it wasn't initialised yet,
* use the default. We can do that since we take the
@@ -3392,9 +2926,9 @@
return ret;
}
-int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
+static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
{
struct iwl_priv *priv = hw->priv;
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
@@ -3435,8 +2969,8 @@
return 0;
}
-void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
- struct ieee80211_channel_switch *ch_switch)
+static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
+ struct ieee80211_channel_switch *ch_switch)
{
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
@@ -3457,21 +2991,22 @@
IWL_DEBUG_MAC80211(priv, "enter\n");
+ mutex_lock(&priv->mutex);
+
if (iwl_is_rfkill(priv))
- goto out_exit;
+ goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
- goto out_exit;
+ goto out;
if (!iwl_is_associated_ctx(ctx))
- goto out_exit;
+ goto out;
/* channel switch in progress */
if (priv->switch_rxon.switch_in_progress == true)
- goto out_exit;
+ goto out;
- mutex_lock(&priv->mutex);
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
@@ -3527,16 +3062,15 @@
}
out:
mutex_unlock(&priv->mutex);
-out_exit:
if (!priv->switch_rxon.switch_in_progress)
ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-void iwlagn_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast)
+static void iwlagn_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
{
struct iwl_priv *priv = hw->priv;
__le32 filter_or = 0, filter_nand = 0;
@@ -3583,7 +3117,7 @@
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
-void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
+static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
{
struct iwl_priv *priv = hw->priv;
@@ -3729,8 +3263,6 @@
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
- INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
- INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
INIT_DELAYED_WORK(&priv->_agn.hw_roc_work, iwlagn_bg_roc_done);
iwl_setup_scan_deferred_work(priv);
@@ -3750,12 +3282,8 @@
priv->watchdog.data = (unsigned long)priv;
priv->watchdog.function = iwl_bg_watchdog;
- if (!priv->cfg->base_params->use_isr_legacy)
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl_irq_tasklet, (unsigned long)priv);
- else
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl_irq_tasklet_legacy, (unsigned long)priv);
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ iwl_irq_tasklet, (unsigned long)priv);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv)
@@ -3763,8 +3291,6 @@
if (priv->cfg->ops->lib->cancel_deferred_work)
priv->cfg->ops->lib->cancel_deferred_work(priv);
- cancel_delayed_work_sync(&priv->init_alive_start);
- cancel_delayed_work(&priv->alive_start);
cancel_work_sync(&priv->run_time_calib_work);
cancel_work_sync(&priv->beacon_update);
@@ -3805,10 +3331,7 @@
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
- INIT_LIST_HEAD(&priv->free_frames);
-
mutex_init(&priv->mutex);
- mutex_init(&priv->sync_cmd_mutex);
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
@@ -3845,12 +3368,6 @@
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
}
- /* Set the tx_power_user_lmt to the lowest power level
- * this value will get overwritten by channel max power avg
- * from eeprom */
- priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
- priv->tx_power_next = IWLAGN_TX_POWER_TARGET_POWER_MIN;
-
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
@@ -3905,28 +3422,30 @@
.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
.offchannel_tx = iwl_mac_offchannel_tx,
.offchannel_tx_cancel_wait = iwl_mac_offchannel_tx_cancel_wait,
+ CFG80211_TESTMODE_CMD(iwl_testmode_cmd)
};
-static void iwl_hw_detect(struct iwl_priv *priv)
+static u32 iwl_hw_detect(struct iwl_priv *priv)
{
- priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
- priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
- priv->rev_id = priv->pci_dev->revision;
- IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id);
+ u8 rev_id;
+
+ pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
+ IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
+ return iwl_read32(priv, CSR_HW_REV);
}
static int iwl_set_hw_params(struct iwl_priv *priv)
{
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- if (priv->cfg->mod_params->amsdu_size_8K)
+ if (iwlagn_mod_params.amsdu_size_8K)
priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
else
priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
- if (priv->cfg->mod_params->disable_11n)
+ if (iwlagn_mod_params.disable_11n)
priv->cfg->sku &= ~IWL_SKU_N;
/* Device-specific setup */
@@ -3955,6 +3474,28 @@
7, 6, 5, 4,
};
+/* This function both allocates and initializes hw and priv. */
+static struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
+{
+ struct iwl_priv *priv;
+ /* mac80211 allocates memory for this device instance, including
+ * space for this driver's private structure */
+ struct ieee80211_hw *hw;
+
+ hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), &iwlagn_hw_ops);
+ if (hw == NULL) {
+ pr_err("%s: Can not allocate network device\n",
+ cfg->name);
+ goto out;
+ }
+
+ priv = hw->priv;
+ priv->hw = hw;
+
+out:
+ return hw;
+}
+
static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err = 0, i;
@@ -3963,19 +3504,12 @@
struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
unsigned long flags;
u16 pci_cmd, num_mac;
+ u32 hw_rev;
/************************
* 1. Allocating HW data
************************/
- /* Disabling hardware scan means that mac80211 will perform scans
- * "the hard way", rather than using device's scan. */
- if (cfg->mod_params->disable_hw_scan) {
- dev_printk(KERN_DEBUG, &(pdev->dev),
- "sw scan support is deprecated\n");
- iwlagn_hw_ops.hw_scan = NULL;
- }
-
hw = iwl_alloc_all(cfg);
if (!hw) {
err = -ENOMEM;
@@ -3984,6 +3518,8 @@
priv = hw->priv;
/* At this point both hw and priv are allocated. */
+ priv->ucode_type = UCODE_SUBTYPE_NONE_LOADED;
+
/*
* The default context is always valid,
* more may be discovered when firmware
@@ -4116,16 +3652,15 @@
*/
iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
- iwl_hw_detect(priv);
+ hw_rev = iwl_hw_detect(priv);
IWL_INFO(priv, "Detected %s, REV=0x%X\n",
- priv->cfg->name, priv->hw_rev);
+ priv->cfg->name, hw_rev);
/* We disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state */
pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
- iwl_prepare_card_hw(priv);
- if (!priv->hw_ready) {
+ if (iwl_prepare_card_hw(priv)) {
IWL_WARN(priv, "Failed, HW not ready\n");
goto out_iounmap;
}
@@ -4134,7 +3669,7 @@
* 4. Read EEPROM
*****************/
/* Read the EEPROM */
- err = iwl_eeprom_init(priv);
+ err = iwl_eeprom_init(priv, hw_rev);
if (err) {
IWL_ERR(priv, "Unable to init EEPROM\n");
goto out_iounmap;
@@ -4186,10 +3721,9 @@
pci_enable_msi(priv->pci_dev);
- if (priv->cfg->ops->lib->isr_ops.alloc)
- priv->cfg->ops->lib->isr_ops.alloc(priv);
+ iwl_alloc_isr_ict(priv);
- err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
+ err = request_irq(priv->pci_dev->irq, iwl_isr_ict,
IRQF_SHARED, DRV_NAME, priv);
if (err) {
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
@@ -4198,6 +3732,7 @@
iwl_setup_deferred_work(priv);
iwl_setup_rx_handlers(priv);
+ iwl_testmode_init(priv);
/*********************************************
* 8. Enable interrupts and read RFKILL state
@@ -4236,8 +3771,7 @@
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
free_irq(priv->pci_dev->irq, priv);
- if (priv->cfg->ops->lib->isr_ops.free)
- priv->cfg->ops->lib->isr_ops.free(priv);
+ iwl_free_isr_ict(priv);
out_disable_msi:
pci_disable_msi(priv->pci_dev);
iwl_uninit_drv(priv);
@@ -4283,17 +3817,9 @@
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
- } else {
- iwl_down(priv);
}
- /*
- * Make sure device is reset to low power before unloading driver.
- * This may be redundant with iwl_down(), but there are paths to
- * run iwl_down() without calling apm_ops.stop(), and there are
- * paths to avoid running iwl_down() at all before leaving driver.
- * This (inexpensive) call *makes sure* device is reset.
- */
+ /* Reset to low power before unloading driver. */
iwl_apm_stop(priv);
iwl_tt_exit(priv);
@@ -4335,8 +3861,7 @@
iwl_uninit_drv(priv);
- if (priv->cfg->ops->lib->isr_ops.free)
- priv->cfg->ops->lib->isr_ops.free(priv);
+ iwl_free_isr_ict(priv);
dev_kfree_skb(priv->beacon_skb);
@@ -4521,21 +4046,21 @@
{IWL_PCI_DEVICE(0x088F, 0x4266, iwl6035_2bg_cfg)},
{IWL_PCI_DEVICE(0x088E, 0x4466, iwl6035_2bg_cfg)},
-/* 200 Series */
- {IWL_PCI_DEVICE(0x0894, 0x0022, iwl200_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0895, 0x0222, iwl200_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0894, 0x0422, iwl200_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0894, 0x0026, iwl200_bg_cfg)},
- {IWL_PCI_DEVICE(0x0895, 0x0226, iwl200_bg_cfg)},
- {IWL_PCI_DEVICE(0x0894, 0x0426, iwl200_bg_cfg)},
+/* 105 Series */
+ {IWL_PCI_DEVICE(0x0894, 0x0022, iwl105_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0895, 0x0222, iwl105_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0422, iwl105_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0026, iwl105_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0895, 0x0226, iwl105_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0426, iwl105_bg_cfg)},
-/* 230 Series */
- {IWL_PCI_DEVICE(0x0892, 0x0062, iwl230_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0893, 0x0262, iwl230_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0892, 0x0462, iwl230_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0892, 0x0066, iwl230_bg_cfg)},
- {IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
- {IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
+/* 135 Series */
+ {IWL_PCI_DEVICE(0x0892, 0x0062, iwl135_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0893, 0x0262, iwl135_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0462, iwl135_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0066, iwl135_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0893, 0x0266, iwl135_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0466, iwl135_bg_cfg)},
{0}
};
@@ -4585,43 +4110,21 @@
module_init(iwl_init);
#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
-MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "debug output mask");
#endif
-module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
-MODULE_PARM_DESC(swcrypto50,
- "using crypto in software (default 0 [hardware]) (deprecated)");
module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(queues_num50,
- iwlagn_mod_params.num_of_queues, int, S_IRUGO);
-MODULE_PARM_DESC(queues_num50,
- "number of hw queues in 50xx series (deprecated)");
module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
-module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
-MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
- int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K50,
- "enable 8K amsdu size in 50XX series (deprecated)");
module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart50,
- "restart firmware in case of error (deprecated)");
module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
-module_param_named(
- disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
- "disable hardware scanning (default 0) (deprecated)");
module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
S_IRUGO);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index 20f8e41..fe33fe8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -66,7 +66,6 @@
#include "iwl-dev.h"
/* configuration for the _agn devices */
-extern struct iwl_cfg iwl4965_agn_cfg;
extern struct iwl_cfg iwl5300_agn_cfg;
extern struct iwl_cfg iwl5100_agn_cfg;
extern struct iwl_cfg iwl5350_agn_cfg;
@@ -103,10 +102,10 @@
extern struct iwl_cfg iwl6035_2agn_cfg;
extern struct iwl_cfg iwl6035_2abg_cfg;
extern struct iwl_cfg iwl6035_2bg_cfg;
-extern struct iwl_cfg iwl200_bg_cfg;
-extern struct iwl_cfg iwl200_bgn_cfg;
-extern struct iwl_cfg iwl230_bg_cfg;
-extern struct iwl_cfg iwl230_bgn_cfg;
+extern struct iwl_cfg iwl105_bg_cfg;
+extern struct iwl_cfg iwl105_bgn_cfg;
+extern struct iwl_cfg iwl135_bg_cfg;
+extern struct iwl_cfg iwl135_bgn_cfg;
extern struct iwl_mod_params iwlagn_mod_params;
extern struct iwl_hcmd_ops iwlagn_hcmd;
@@ -114,7 +113,6 @@
extern struct iwl_hcmd_utils_ops iwlagn_hcmd_utils;
extern struct ieee80211_ops iwlagn_hw_ops;
-extern struct ieee80211_ops iwl4965_hw_ops;
int iwl_reset_ict(struct iwl_priv *priv);
void iwl_disable_ict(struct iwl_priv *priv);
@@ -122,21 +120,25 @@
void iwl_free_isr_ict(struct iwl_priv *priv);
irqreturn_t iwl_isr_ict(int irq, void *data);
+/* call this function to flush any scheduled tasklet */
+static inline void iwl_synchronize_irq(struct iwl_priv *priv)
+{
+ /* wait to make sure we flush pending tasklet*/
+ synchronize_irq(priv->pci_dev->irq);
+ tasklet_kill(&priv->irq_tasklet);
+}
+
+int iwl_prepare_card_hw(struct iwl_priv *priv);
+
+int iwlagn_start_device(struct iwl_priv *priv);
+void iwlagn_stop_device(struct iwl_priv *priv);
+
/* tx queue */
void iwlagn_set_wr_ptrs(struct iwl_priv *priv,
int txq_id, u32 index);
void iwlagn_tx_queue_set_status(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
int tx_fifo_id, int scd_retry);
-void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- u16 byte_cnt);
-void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
- struct iwl_tx_queue *txq);
-int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
- int tx_fifo, int sta_id, int tid, u16 ssn_idx);
-int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
- u16 ssn_idx, u8 tx_fifo);
void iwlagn_txq_set_sched(struct iwl_priv *priv, u32 mask);
void iwl_free_tfds_in_queue(struct iwl_priv *priv,
int sta_id, int tid, int freed);
@@ -151,16 +153,14 @@
u32 changes);
/* uCode */
-int iwlagn_load_ucode(struct iwl_priv *priv);
void iwlagn_rx_calib_result(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb);
-void iwlagn_rx_calib_complete(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb);
-void iwlagn_init_alive_start(struct iwl_priv *priv);
-int iwlagn_alive_notify(struct iwl_priv *priv);
-int iwl_verify_ucode(struct iwl_priv *priv);
-void iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type);
+int iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type);
void iwlagn_send_prio_tbl(struct iwl_priv *priv);
+int iwlagn_run_init_ucode(struct iwl_priv *priv);
+int iwlagn_load_ucode_wait_alive(struct iwl_priv *priv,
+ struct fw_img *image,
+ int subtype, int alternate_subtype);
/* lib */
void iwl_check_abort_status(struct iwl_priv *priv,
@@ -179,8 +179,6 @@
int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv);
int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
-void iwl_dump_csr(struct iwl_priv *priv);
-int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display);
/* rx */
void iwlagn_rx_queue_restock(struct iwl_priv *priv);
@@ -206,6 +204,9 @@
struct ieee80211_sta *sta, u16 tid, u16 *ssn);
int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, u16 tid);
+void iwlagn_txq_agg_queue_setup(struct iwl_priv *priv,
+ struct ieee80211_sta *sta,
+ int tid, int frame_limit);
int iwlagn_txq_check_empty(struct iwl_priv *priv,
int sta_id, u8 tid, int txq_id);
void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
@@ -225,6 +226,7 @@
case TX_STATUS_DIRECT_DONE:
return IEEE80211_TX_STAT_ACK;
case TX_STATUS_FAIL_DEST_PS:
+ case TX_STATUS_FAIL_PASSIVE_NO_RX:
return IEEE80211_TX_STAT_TX_FILTERED;
default:
return 0;
@@ -249,8 +251,6 @@
struct ieee80211_vif *vif, bool add);
/* hcmd */
-int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx);
int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant);
int iwlagn_send_beacon_cmd(struct iwl_priv *priv);
@@ -311,7 +311,7 @@
static inline u8 iwl_hw_get_rate(__le32 rate_n_flags)
{
- return le32_to_cpu(rate_n_flags) & 0xFF;
+ return le32_to_cpu(rate_n_flags) & RATE_MCS_RATE_MSK;
}
static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags)
@@ -322,50 +322,39 @@
/* eeprom */
void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv);
void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac);
-int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv);
-void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv);
/* notification wait support */
void __acquires(wait_entry)
iwlagn_init_notification_wait(struct iwl_priv *priv,
struct iwl_notification_wait *wait_entry,
+ u8 cmd,
void (*fn)(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt),
- u8 cmd);
-signed long __releases(wait_entry)
+ struct iwl_rx_packet *pkt,
+ void *data),
+ void *fn_data);
+int __must_check __releases(wait_entry)
iwlagn_wait_notification(struct iwl_priv *priv,
struct iwl_notification_wait *wait_entry,
unsigned long timeout);
void __releases(wait_entry)
iwlagn_remove_notification(struct iwl_priv *priv,
struct iwl_notification_wait *wait_entry);
-
-/* mac80211 handlers (for 4965) */
-void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-int iwlagn_mac_start(struct ieee80211_hw *hw);
-void iwlagn_mac_stop(struct ieee80211_hw *hw);
-void iwlagn_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast);
-int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key);
-void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_key_conf *keyconf,
- struct ieee80211_sta *sta,
- u32 iv32, u16 *phase1key);
-int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size);
-int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta);
-void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
- struct ieee80211_channel_switch *ch_switch);
-void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop);
+extern int iwlagn_init_alive_start(struct iwl_priv *priv);
+extern int iwl_alive_start(struct iwl_priv *priv);
+/* svtool */
+#ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
+extern int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len);
+extern void iwl_testmode_init(struct iwl_priv *priv);
+#else
+static inline
+int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+ return -ENOSYS;
+}
+static inline
+void iwl_testmode_init(struct iwl_priv *priv)
+{
+}
+#endif
#endif /* __iwl_agn_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index ca42ffa..5fdad65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -103,9 +103,7 @@
REPLY_WEPKEY = 0x20,
/* RX, TX, LEDs */
- REPLY_3945_RX = 0x1b, /* 3945 only */
REPLY_TX = 0x1c,
- REPLY_RATE_SCALE = 0x47, /* 3945 only */
REPLY_LEDS_CMD = 0x48,
REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 and up */
@@ -229,7 +227,7 @@
* There is one exception: uCode sets bit 15 when it originates
* the response/notification, i.e. when the response/notification
* is not a direct response to a command sent by the driver. For
- * example, uCode issues REPLY_3945_RX when it sends a received frame
+ * example, uCode issues REPLY_RX when it sends a received frame
* to the driver; it is not a direct response to any driver command.
*
* The Linux driver uses the following format:
@@ -249,36 +247,6 @@
/**
- * struct iwl3945_tx_power
- *
- * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH
- *
- * Each entry contains two values:
- * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
- * linear value that multiplies the output of the digital signal processor,
- * before being sent to the analog radio.
- * 2) Radio gain. This sets the analog gain of the radio Tx path.
- * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
- *
- * Driver obtains values from struct iwl3945_tx_power power_gain_table[][].
- */
-struct iwl3945_tx_power {
- u8 tx_gain; /* gain for analog radio */
- u8 dsp_atten; /* gain for DSP */
-} __packed;
-
-/**
- * struct iwl3945_power_per_rate
- *
- * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
- */
-struct iwl3945_power_per_rate {
- u8 rate; /* plcp */
- struct iwl3945_tx_power tpc;
- u8 reserved;
-} __packed;
-
-/**
* iwlagn rate_n_flags bit fields
*
* rate_n_flags format is used in following iwlagn commands:
@@ -324,6 +292,8 @@
#define RATE_MCS_SPATIAL_MSK 0x18
#define RATE_MCS_HT_DUP_POS 5
#define RATE_MCS_HT_DUP_MSK 0x20
+/* Both legacy and HT use bits 7:0 as the CCK/OFDM rate or HT MCS */
+#define RATE_MCS_RATE_MSK 0xff
/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
#define RATE_MCS_FLAGS_POS 8
@@ -375,30 +345,6 @@
#define IWL_PWR_CCK_ENTRIES 2
/**
- * union iwl4965_tx_power_dual_stream
- *
- * Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
- * Use __le32 version (struct tx_power_dual_stream) when building command.
- *
- * Driver provides radio gain and DSP attenuation settings to device in pairs,
- * one value for each transmitter chain. The first value is for transmitter A,
- * second for transmitter B.
- *
- * For SISO bit rates, both values in a pair should be identical.
- * For MIMO rates, one value may be different from the other,
- * in order to balance the Tx output between the two transmitters.
- *
- * See more details in doc for TXPOWER in iwl-4965-hw.h.
- */
-union iwl4965_tx_power_dual_stream {
- struct {
- u8 radio_tx_gain[2];
- u8 dsp_predis_atten[2];
- } s;
- u32 dw;
-};
-
-/**
* struct tx_power_dual_stream
*
* Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
@@ -410,15 +356,6 @@
} __packed;
/**
- * struct iwl4965_tx_power_db
- *
- * Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
- */
-struct iwl4965_tx_power_db {
- struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES];
-} __packed;
-
-/**
* Command REPLY_TX_POWER_DBM_CMD = 0x98
* struct iwlagn_tx_power_dbm_cmd
*/
@@ -449,55 +386,18 @@
*****************************************************************************/
#define UCODE_VALID_OK cpu_to_le32(0x1)
-#define INITIALIZE_SUBTYPE (9)
-/*
- * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command)
- *
- * uCode issues this "initialize alive" notification once the initialization
- * uCode image has completed its work, and is ready to load the runtime image.
- * This is the *first* "alive" notification that the driver will receive after
- * rebooting uCode; the "initialize" alive is indicated by subtype field == 9.
- *
- * See comments documenting "BSM" (bootstrap state machine).
- *
- * For 4965, this notification contains important calibration data for
- * calculating txpower settings:
- *
- * 1) Power supply voltage indication. The voltage sensor outputs higher
- * values for lower voltage, and vice verse.
- *
- * 2) Temperature measurement parameters, for each of two channel widths
- * (20 MHz and 40 MHz) supported by the radios. Temperature sensing
- * is done via one of the receiver chains, and channel width influences
- * the results.
- *
- * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation,
- * for each of 5 frequency ranges.
- */
-struct iwl_init_alive_resp {
- u8 ucode_minor;
- u8 ucode_major;
- __le16 reserved1;
- u8 sw_rev[8];
- u8 ver_type;
- u8 ver_subtype; /* "9" for initialize alive */
- __le16 reserved2;
- __le32 log_event_table_ptr;
- __le32 error_event_table_ptr;
- __le32 timestamp;
- __le32 is_valid;
+enum iwlagn_ucode_subtype {
+ UCODE_SUBTYPE_REGULAR = 0,
+ UCODE_SUBTYPE_REGULAR_NEW = 1,
+ UCODE_SUBTYPE_INIT = 9,
- /* calibration values from "initialize" uCode */
- __le32 voltage; /* signed, higher value is lower voltage */
- __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */
- __le32 therm_r2[2]; /* signed */
- __le32 therm_r3[2]; /* signed */
- __le32 therm_r4[2]; /* signed */
- __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups,
- * 2 Tx chains */
-} __packed;
-
+ /*
+ * Not a valid subtype, the ucode has just a u8, so
+ * we can use something > 0xff for this value.
+ */
+ UCODE_SUBTYPE_NONE_LOADED = 0x100,
+};
/**
* REPLY_ALIVE = 0x1 (response only, not a command)
@@ -533,49 +433,61 @@
*
* 2) error_event_table_ptr indicates base of the error log. This contains
* information about any uCode error that occurs. For agn, the format
- * of the error log is:
- *
- * __le32 valid; (nonzero) valid, (0) log is empty
- * __le32 error_id; type of error
- * __le32 pc; program counter
- * __le32 blink1; branch link
- * __le32 blink2; branch link
- * __le32 ilink1; interrupt link
- * __le32 ilink2; interrupt link
- * __le32 data1; error-specific data
- * __le32 data2; error-specific data
- * __le32 line; source code line of error
- * __le32 bcon_time; beacon timer
- * __le32 tsf_low; network timestamp function timer
- * __le32 tsf_hi; network timestamp function timer
- * __le32 gp1; GP1 timer register
- * __le32 gp2; GP2 timer register
- * __le32 gp3; GP3 timer register
- * __le32 ucode_ver; uCode version
- * __le32 hw_ver; HW Silicon version
- * __le32 brd_ver; HW board version
- * __le32 log_pc; log program counter
- * __le32 frame_ptr; frame pointer
- * __le32 stack_ptr; stack pointer
- * __le32 hcmd; last host command
- * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag
- * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag
- * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag
- * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag
- * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt
- * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT
- * __le32 wait_event; wait event() caller address
- * __le32 l2p_control; L2pControlField
- * __le32 l2p_duration; L2pDurationField
- * __le32 l2p_mhvalid; L2pMhValidBits
- * __le32 l2p_addr_match; L2pAddrMatchStat
- * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL)
- * __le32 u_timestamp; indicate when the date and time of the compilation
- * __le32 reserved;
+ * of the error log is defined by struct iwl_error_event_table.
*
* The Linux driver can print both logs to the system log when a uCode error
* occurs.
*/
+
+/*
+ * Note: This structure is read from the device with IO accesses,
+ * and the reading already does the endian conversion. As it is
+ * read with u32-sized accesses, any members with a different size
+ * need to be ordered correctly though!
+ */
+struct iwl_error_event_table {
+ u32 valid; /* (nonzero) valid, (0) log is empty */
+ u32 error_id; /* type of error */
+ u32 pc; /* program counter */
+ u32 blink1; /* branch link */
+ u32 blink2; /* branch link */
+ u32 ilink1; /* interrupt link */
+ u32 ilink2; /* interrupt link */
+ u32 data1; /* error-specific data */
+ u32 data2; /* error-specific data */
+ u32 line; /* source code line of error */
+ u32 bcon_time; /* beacon timer */
+ u32 tsf_low; /* network timestamp function timer */
+ u32 tsf_hi; /* network timestamp function timer */
+ u32 gp1; /* GP1 timer register */
+ u32 gp2; /* GP2 timer register */
+ u32 gp3; /* GP3 timer register */
+ u32 ucode_ver; /* uCode version */
+ u32 hw_ver; /* HW Silicon version */
+ u32 brd_ver; /* HW board version */
+ u32 log_pc; /* log program counter */
+ u32 frame_ptr; /* frame pointer */
+ u32 stack_ptr; /* stack pointer */
+ u32 hcmd; /* last host command header */
+#if 0
+ /* no need to read the remainder, we don't use the values */
+ u32 isr0; /* isr status register LMPM_NIC_ISR0: rxtx_flag */
+ u32 isr1; /* isr status register LMPM_NIC_ISR1: host_flag */
+ u32 isr2; /* isr status register LMPM_NIC_ISR2: enc_flag */
+ u32 isr3; /* isr status register LMPM_NIC_ISR3: time_flag */
+ u32 isr4; /* isr status register LMPM_NIC_ISR4: wico interrupt */
+ u32 isr_pref; /* isr status register LMPM_NIC_PREF_STAT */
+ u32 wait_event; /* wait event() caller address */
+ u32 l2p_control; /* L2pControlField */
+ u32 l2p_duration; /* L2pDurationField */
+ u32 l2p_mhvalid; /* L2pMhValidBits */
+ u32 l2p_addr_match; /* L2pAddrMatchStat */
+ u32 lmpm_pmg_sel; /* indicate which clocks are turned on (LMPM_PMG_SEL) */
+ u32 u_timestamp; /* indicate when the date and time of the compilation */
+ u32 flow_handler; /* FH read/write pointers, RX credit */
+#endif
+} __packed;
+
struct iwl_alive_resp {
u8 ucode_minor;
u8 ucode_major;
@@ -722,46 +634,6 @@
* regardless of whether RXON_FILTER_ASSOC_MSK is set.
*/
-struct iwl3945_rxon_cmd {
- u8 node_addr[6];
- __le16 reserved1;
- u8 bssid_addr[6];
- __le16 reserved2;
- u8 wlap_bssid_addr[6];
- __le16 reserved3;
- u8 dev_type;
- u8 air_propagation;
- __le16 reserved4;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 assoc_id;
- __le32 flags;
- __le32 filter_flags;
- __le16 channel;
- __le16 reserved5;
-} __packed;
-
-struct iwl4965_rxon_cmd {
- u8 node_addr[6];
- __le16 reserved1;
- u8 bssid_addr[6];
- __le16 reserved2;
- u8 wlap_bssid_addr[6];
- __le16 reserved3;
- u8 dev_type;
- u8 air_propagation;
- __le16 rx_chain;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 assoc_id;
- __le32 flags;
- __le32 filter_flags;
- __le16 channel;
- u8 ofdm_ht_single_stream_basic_rates;
- u8 ofdm_ht_dual_stream_basic_rates;
-} __packed;
-
-/* 5000 HW just extend this command */
struct iwl_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
@@ -789,26 +661,7 @@
/*
* REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
*/
-struct iwl3945_rxon_assoc_cmd {
- __le32 flags;
- __le32 filter_flags;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 reserved;
-} __packed;
-
-struct iwl4965_rxon_assoc_cmd {
- __le32 flags;
- __le32 filter_flags;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- u8 ofdm_ht_single_stream_basic_rates;
- u8 ofdm_ht_dual_stream_basic_rates;
- __le16 rx_chain_select_flags;
- __le16 reserved;
-} __packed;
-
-struct iwl5000_rxon_assoc_cmd {
+struct iwl_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
@@ -843,26 +696,6 @@
/*
* REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
*/
-struct iwl3945_channel_switch_cmd {
- u8 band;
- u8 expect_beacon;
- __le16 channel;
- __le32 rxon_flags;
- __le32 rxon_filter_flags;
- __le32 switch_time;
- struct iwl3945_power_per_rate power[IWL_MAX_RATES];
-} __packed;
-
-struct iwl4965_channel_switch_cmd {
- u8 band;
- u8 expect_beacon;
- __le16 channel;
- __le32 rxon_flags;
- __le32 rxon_filter_flags;
- __le32 switch_time;
- struct iwl4965_tx_power_db tx_power;
-} __packed;
-
/**
* struct iwl5000_channel_switch_cmd
* @band: 0- 5.2GHz, 1- 2.4GHz
@@ -976,15 +809,10 @@
#define IWL_AP_ID 0
#define IWL_AP_ID_PAN 1
#define IWL_STA_ID 2
-#define IWL3945_BROADCAST_ID 24
-#define IWL3945_STATION_COUNT 25
-#define IWL4965_BROADCAST_ID 31
-#define IWL4965_STATION_COUNT 32
#define IWLAGN_PAN_BCAST_ID 14
#define IWLAGN_BROADCAST_ID 15
#define IWLAGN_STATION_COUNT 16
-#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/
#define IWL_INVALID_STATION 255
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
@@ -1032,16 +860,6 @@
* combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid))
-struct iwl4965_keyinfo {
- __le16 key_flags;
- u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
- u8 reserved1;
- __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */
- u8 key_offset;
- u8 reserved2;
- u8 key[16]; /* 16-byte unicast decryption key */
-} __packed;
-
/* agn */
struct iwl_keyinfo {
__le16 key_flags;
@@ -1083,7 +901,6 @@
* with info on security keys, aggregation parameters, and Tx rates for
* initial Tx attempt and any retries (agn devices uses
* REPLY_TX_LINK_QUALITY_CMD,
- * 3945 uses REPLY_RATE_SCALE to set up rate tables).
*
* REPLY_ADD_STA sets up the table entry for one station, either creating
* a new entry, or modifying a pre-existing one.
@@ -1103,72 +920,6 @@
* entries for all STAs in network, starting with index IWL_STA_ID.
*/
-struct iwl3945_addsta_cmd {
- u8 mode; /* 1: modify existing, 0: add new station */
- u8 reserved[3];
- struct sta_id_modify sta;
- struct iwl4965_keyinfo key;
- __le32 station_flags; /* STA_FLG_* */
- __le32 station_flags_msk; /* STA_FLG_* */
-
- /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
- * corresponding to bit (e.g. bit 5 controls TID 5).
- * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
- __le16 tid_disable_tx;
-
- __le16 rate_n_flags;
-
- /* TID for which to add block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- u8 add_immediate_ba_tid;
-
- /* TID for which to remove block-ack support.
- * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
- u8 remove_immediate_ba_tid;
-
- /* Starting Sequence Number for added block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- __le16 add_immediate_ba_ssn;
-} __packed;
-
-struct iwl4965_addsta_cmd {
- u8 mode; /* 1: modify existing, 0: add new station */
- u8 reserved[3];
- struct sta_id_modify sta;
- struct iwl4965_keyinfo key;
- __le32 station_flags; /* STA_FLG_* */
- __le32 station_flags_msk; /* STA_FLG_* */
-
- /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
- * corresponding to bit (e.g. bit 5 controls TID 5).
- * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
- __le16 tid_disable_tx;
-
- __le16 reserved1;
-
- /* TID for which to add block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- u8 add_immediate_ba_tid;
-
- /* TID for which to remove block-ack support.
- * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
- u8 remove_immediate_ba_tid;
-
- /* Starting Sequence Number for added block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- __le16 add_immediate_ba_ssn;
-
- /*
- * Number of packets OK to transmit to station even though
- * it is asleep -- used to synchronise PS-poll and u-APSD
- * responses while ucode keeps track of STA sleep state.
- */
- __le16 sleep_tx_count;
-
- __le16 reserved2;
-} __packed;
-
-/* agn */
struct iwl_addsta_cmd {
u8 mode; /* 1: modify existing, 0: add new station */
u8 reserved[3];
@@ -1337,62 +1088,6 @@
#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
-struct iwl3945_rx_frame_stats {
- u8 phy_count;
- u8 id;
- u8 rssi;
- u8 agc;
- __le16 sig_avg;
- __le16 noise_diff;
- u8 payload[0];
-} __packed;
-
-struct iwl3945_rx_frame_hdr {
- __le16 channel;
- __le16 phy_flags;
- u8 reserved1;
- u8 rate;
- __le16 len;
- u8 payload[0];
-} __packed;
-
-struct iwl3945_rx_frame_end {
- __le32 status;
- __le64 timestamp;
- __le32 beacon_timestamp;
-} __packed;
-
-/*
- * REPLY_3945_RX = 0x1b (response only, not a command)
- *
- * NOTE: DO NOT dereference from casts to this structure
- * It is provided only for calculating minimum data set size.
- * The actual offsets of the hdr and end are dynamic based on
- * stats.phy_count
- */
-struct iwl3945_rx_frame {
- struct iwl3945_rx_frame_stats stats;
- struct iwl3945_rx_frame_hdr hdr;
- struct iwl3945_rx_frame_end end;
-} __packed;
-
-#define IWL39_RX_FRAME_SIZE (4 + sizeof(struct iwl3945_rx_frame))
-
-/* Fixed (non-configurable) rx data from phy */
-
-#define IWL49_RX_RES_PHY_CNT 14
-#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4)
-#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
-#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
-#define IWL49_AGC_DB_POS (7)
-struct iwl4965_rx_non_cfg_phy {
- __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */
- __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */
- u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */
- u8 pad[0];
-} __packed;
-
-
#define IWLAGN_RX_RES_PHY_CNT 8
#define IWLAGN_RX_RES_AGC_IDX 1
#define IWLAGN_RX_RES_RSSI_AB_IDX 2
@@ -1576,80 +1271,6 @@
* REPLY_TX = 0x1c (command)
*/
-struct iwl3945_tx_cmd {
- /*
- * MPDU byte count:
- * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
- * + 8 byte IV for CCM or TKIP (not used for WEP)
- * + Data payload
- * + 8-byte MIC (not used for CCM/WEP)
- * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
- * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
- * Range: 14-2342 bytes.
- */
- __le16 len;
-
- /*
- * MPDU or MSDU byte count for next frame.
- * Used for fragmentation and bursting, but not 11n aggregation.
- * Same as "len", but for next frame. Set to 0 if not applicable.
- */
- __le16 next_frame_len;
-
- __le32 tx_flags; /* TX_CMD_FLG_* */
-
- u8 rate;
-
- /* Index of recipient station in uCode's station table */
- u8 sta_id;
- u8 tid_tspec;
- u8 sec_ctl;
- u8 key[16];
- union {
- u8 byte[8];
- __le16 word[4];
- __le32 dw[2];
- } tkip_mic;
- __le32 next_frame_info;
- union {
- __le32 life_time;
- __le32 attempt;
- } stop_time;
- u8 supp_rates[2];
- u8 rts_retry_limit; /*byte 50 */
- u8 data_retry_limit; /*byte 51 */
- union {
- __le16 pm_frame_timeout;
- __le16 attempt_duration;
- } timeout;
-
- /*
- * Duration of EDCA burst Tx Opportunity, in 32-usec units.
- * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
- */
- __le16 driver_txop;
-
- /*
- * MAC header goes here, followed by 2 bytes padding if MAC header
- * length is 26 or 30 bytes, followed by payload data
- */
- u8 payload[0];
- struct ieee80211_hdr hdr[0];
-} __packed;
-
-/*
- * REPLY_TX = 0x1c (response)
- */
-struct iwl3945_tx_resp {
- u8 failure_rts;
- u8 failure_frame;
- u8 bt_kill_count;
- u8 rate;
- __le32 wireless_media_time;
- __le32 status; /* TX status */
-} __packed;
-
-
/*
* 4965 uCode updates these Tx attempt count values in host DRAM.
* Used for managing Tx retries when expecting block-acks.
@@ -1740,54 +1361,6 @@
struct ieee80211_hdr hdr[0];
} __packed;
-/* TX command response is sent after *3945* transmission attempts.
- *
- * NOTES:
- *
- * TX_STATUS_FAIL_NEXT_FRAG
- *
- * If the fragment flag in the MAC header for the frame being transmitted
- * is set and there is insufficient time to transmit the next frame, the
- * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'.
- *
- * TX_STATUS_FIFO_UNDERRUN
- *
- * Indicates the host did not provide bytes to the FIFO fast enough while
- * a TX was in progress.
- *
- * TX_STATUS_FAIL_MGMNT_ABORT
- *
- * This status is only possible if the ABORT ON MGMT RX parameter was
- * set to true with the TX command.
- *
- * If the MSB of the status parameter is set then an abort sequence is
- * required. This sequence consists of the host activating the TX Abort
- * control line, and then waiting for the TX Abort command response. This
- * indicates that a the device is no longer in a transmit state, and that the
- * command FIFO has been cleared. The host must then deactivate the TX Abort
- * control line. Receiving is still allowed in this case.
- */
-enum {
- TX_3945_STATUS_SUCCESS = 0x01,
- TX_3945_STATUS_DIRECT_DONE = 0x02,
- TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82,
- TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83,
- TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
- TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85,
- TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86,
- TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87,
- TX_3945_STATUS_FAIL_DEST_PS = 0x88,
- TX_3945_STATUS_FAIL_ABORTED = 0x89,
- TX_3945_STATUS_FAIL_BT_RETRY = 0x8a,
- TX_3945_STATUS_FAIL_STA_INVALID = 0x8b,
- TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c,
- TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d,
- TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
- TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
- TX_3945_STATUS_FAIL_TX_LOCKED = 0x90,
- TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
-};
-
/*
* TX command response is sent after *agn* transmission attempts.
*
@@ -1905,43 +1478,6 @@
__le16 sequence;
} __packed;
-struct iwl4965_tx_resp {
- u8 frame_count; /* 1 no aggregation, >1 aggregation */
- u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
- u8 failure_rts; /* # failures due to unsuccessful RTS */
- u8 failure_frame; /* # failures due to no ACK (unused for agg) */
-
- /* For non-agg: Rate at which frame was successful.
- * For agg: Rate at which all frames were transmitted. */
- __le32 rate_n_flags; /* RATE_MCS_* */
-
- /* For non-agg: RTS + CTS + frame tx attempts time + ACK.
- * For agg: RTS + CTS + aggregation tx time + block-ack time. */
- __le16 wireless_media_time; /* uSecs */
-
- __le16 reserved;
- __le32 pa_power1; /* RF power amplifier measurement (not used) */
- __le32 pa_power2;
-
- /*
- * For non-agg: frame status TX_STATUS_*
- * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
- * fields follow this one, up to frame_count.
- * Bit fields:
- * 11- 0: AGG_TX_STATE_* status code
- * 15-12: Retry count for 1st frame in aggregation (retries
- * occur if tx failed for this frame when it was a
- * member of a previous aggregation block). If rate
- * scaling is used, retry count indicates the rate
- * table entry used for all frames in the new agg.
- * 31-16: Sequence # for this frame's Tx cmd (not SSN!)
- */
- union {
- __le32 status;
- struct agg_tx_status agg_status[0]; /* for each agg frame */
- } u;
-} __packed;
-
/*
* definitions for initial rate index field
* bits [3:0] initial rate index
@@ -2030,52 +1566,8 @@
/*
* REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response)
*
- * See details under "TXPOWER" in iwl-4965-hw.h.
*/
-struct iwl3945_txpowertable_cmd {
- u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
- u8 reserved;
- __le16 channel;
- struct iwl3945_power_per_rate power[IWL_MAX_RATES];
-} __packed;
-
-struct iwl4965_txpowertable_cmd {
- u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
- u8 reserved;
- __le16 channel;
- struct iwl4965_tx_power_db tx_power;
-} __packed;
-
-
-/**
- * struct iwl3945_rate_scaling_cmd - Rate Scaling Command & Response
- *
- * REPLY_RATE_SCALE = 0x47 (command, has simple generic response)
- *
- * NOTE: The table of rates passed to the uCode via the
- * RATE_SCALE command sets up the corresponding order of
- * rates used for all related commands, including rate
- * masks, etc.
- *
- * For example, if you set 9MB (PLCP 0x0f) as the first
- * rate in the rate table, the bit mask for that rate
- * when passed through ofdm_basic_rates on the REPLY_RXON
- * command would be bit 0 (1 << 0)
- */
-struct iwl3945_rate_scaling_info {
- __le16 rate_n_flags;
- u8 try_cnt;
- u8 next_rate_index;
-} __packed;
-
-struct iwl3945_rate_scaling_cmd {
- u8 table_id;
- u8 reserved[3];
- struct iwl3945_rate_scaling_info table[IWL_MAX_RATES];
-} __packed;
-
-
/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
@@ -2130,7 +1622,7 @@
#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
-#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31)
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63)
#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
@@ -2696,14 +2188,6 @@
#define IWL_POWER_BT_SCO_ENA cpu_to_le16(BIT(8))
#define IWL_POWER_ADVANCE_PM_ENA_MSK cpu_to_le16(BIT(9))
-struct iwl3945_powertable_cmd {
- __le16 flags;
- u8 reserved[2];
- __le32 rx_data_timeout;
- __le32 tx_data_timeout;
- __le32 sleep_interval[IWL_POWER_VEC_SIZE];
-} __packed;
-
struct iwl_powertable_cmd {
__le16 flags;
u8 keep_alive_seconds; /* 3945 reserved */
@@ -2806,25 +2290,6 @@
* active_dwell < max_out_time
*/
-/* FIXME: rename to AP1, remove tpc */
-struct iwl3945_scan_channel {
- /*
- * type is defined as:
- * 0:0 1 = active, 0 = passive
- * 1:4 SSID direct bit map; if a bit is set, then corresponding
- * SSID IE is transmitted in probe request.
- * 5:7 reserved
- */
- u8 type;
- u8 channel; /* band is selected by iwl3945_scan_cmd "flags" field */
- struct iwl3945_tx_power tpc;
- __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
- __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
-} __packed;
-
-/* set number of direct probes u8 type */
-#define IWL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1))))
-
struct iwl_scan_channel {
/*
* type is defined as:
@@ -2920,50 +2385,6 @@
* struct iwl_scan_channel.
*/
-struct iwl3945_scan_cmd {
- __le16 len;
- u8 reserved0;
- u8 channel_count; /* # channels in channel list */
- __le16 quiet_time; /* dwell only this # millisecs on quiet channel
- * (only for active scan) */
- __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
- __le16 good_CRC_th; /* passive -> active promotion threshold */
- __le16 reserved1;
- __le32 max_out_time; /* max usec to be away from associated (service)
- * channel */
- __le32 suspend_time; /* pause scan this long (in "extended beacon
- * format") when returning to service channel:
- * 3945; 31:24 # beacons, 19:0 additional usec,
- * 4965; 31:22 # beacons, 21:0 additional usec.
- */
- __le32 flags; /* RXON_FLG_* */
- __le32 filter_flags; /* RXON_FILTER_* */
-
- /* For active scans (set to all-0s for passive scans).
- * Does not include payload. Must specify Tx rate; no rate scaling. */
- struct iwl3945_tx_cmd tx_cmd;
-
- /* For directed active scans (set to all-0s otherwise) */
- struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
-
- /*
- * Probe request frame, followed by channel list.
- *
- * Size of probe request frame is specified by byte count in tx_cmd.
- * Channel list follows immediately after probe request frame.
- * Number of channels in list is specified by channel_count.
- * Each channel in list is of type:
- *
- * struct iwl3945_scan_channel channels[0];
- *
- * NOTE: Only one band of channels can be scanned per pass. You
- * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
- * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
- * before requesting another scan.
- */
- u8 data[0];
-} __packed;
-
enum iwl_scan_flags {
/* BIT(0) currently unused */
IWL_SCAN_FLAGS_ACTION_FRAME_TX = BIT(1),
@@ -3090,20 +2511,6 @@
* BEACON_NOTIFICATION = 0x90 (notification only, not a command)
*/
-struct iwl3945_beacon_notif {
- struct iwl3945_tx_resp beacon_notify_hdr;
- __le32 low_tsf;
- __le32 high_tsf;
- __le32 ibss_mgr_status;
-} __packed;
-
-struct iwl4965_beacon_notif {
- struct iwl4965_tx_resp beacon_notify_hdr;
- __le32 low_tsf;
- __le32 high_tsf;
- __le32 ibss_mgr_status;
-} __packed;
-
struct iwlagn_beacon_notif {
struct iwlagn_tx_resp beacon_notify_hdr;
__le32 low_tsf;
@@ -3115,14 +2522,6 @@
* REPLY_TX_BEACON = 0x91 (command, has simple generic response)
*/
-struct iwl3945_tx_beacon_cmd {
- struct iwl3945_tx_cmd tx;
- __le16 tim_idx;
- u8 tim_size;
- u8 reserved1;
- struct ieee80211_hdr frame[0]; /* beacon frame */
-} __packed;
-
struct iwl_tx_beacon_cmd {
struct iwl_tx_cmd tx;
__le16 tim_idx;
@@ -3159,53 +2558,6 @@
/* statistics command response */
-struct iwl39_statistics_rx_phy {
- __le32 ina_cnt;
- __le32 fina_cnt;
- __le32 plcp_err;
- __le32 crc32_err;
- __le32 overrun_err;
- __le32 early_overrun_err;
- __le32 crc32_good;
- __le32 false_alarm_cnt;
- __le32 fina_sync_err_cnt;
- __le32 sfd_timeout;
- __le32 fina_timeout;
- __le32 unresponded_rts;
- __le32 rxe_frame_limit_overrun;
- __le32 sent_ack_cnt;
- __le32 sent_cts_cnt;
-} __packed;
-
-struct iwl39_statistics_rx_non_phy {
- __le32 bogus_cts; /* CTS received when not expecting CTS */
- __le32 bogus_ack; /* ACK received when not expecting ACK */
- __le32 non_bssid_frames; /* number of frames with BSSID that
- * doesn't belong to the STA BSSID */
- __le32 filtered_frames; /* count frames that were dumped in the
- * filtering process */
- __le32 non_channel_beacons; /* beacons with our bss id but not on
- * our serving channel */
-} __packed;
-
-struct iwl39_statistics_rx {
- struct iwl39_statistics_rx_phy ofdm;
- struct iwl39_statistics_rx_phy cck;
- struct iwl39_statistics_rx_non_phy general;
-} __packed;
-
-struct iwl39_statistics_tx {
- __le32 preamble_cnt;
- __le32 rx_detected_cnt;
- __le32 bt_prio_defer_cnt;
- __le32 bt_prio_kill_cnt;
- __le32 few_bytes_cnt;
- __le32 cts_timeout;
- __le32 ack_timeout;
- __le32 expected_ack_cnt;
- __le32 actual_ack_cnt;
-} __packed;
-
struct statistics_dbg {
__le32 burst_check;
__le32 burst_count;
@@ -3213,23 +2565,6 @@
__le32 reserved[3];
} __packed;
-struct iwl39_statistics_div {
- __le32 tx_on_a;
- __le32 tx_on_b;
- __le32 exec_time;
- __le32 probe_time;
-} __packed;
-
-struct iwl39_statistics_general {
- __le32 temperature;
- struct statistics_dbg dbg;
- __le32 sleep_time;
- __le32 slots_out;
- __le32 slots_idle;
- __le32 ttl_timestamp;
- struct iwl39_statistics_div div;
-} __packed;
-
struct statistics_rx_phy {
__le32 ina_cnt;
__le32 fina_cnt;
@@ -3471,13 +2806,6 @@
#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
-struct iwl3945_notif_statistics {
- __le32 flag;
- struct iwl39_statistics_rx rx;
- struct iwl39_statistics_tx tx;
- struct iwl39_statistics_general general;
-} __packed;
-
struct iwl_notif_statistics {
__le32 flag;
struct statistics_rx rx;
@@ -4451,10 +3779,6 @@
__le32 len_n_flags;
struct iwl_cmd_header hdr;
union {
- struct iwl3945_rx_frame rx_frame;
- struct iwl3945_tx_resp tx_resp;
- struct iwl3945_beacon_notif beacon_status;
-
struct iwl_alive_resp alive_frame;
struct iwl_spectrum_notification spectrum_notif;
struct iwl_csa_notification csa_notif;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index bafbe57..4653dea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -41,6 +41,7 @@
#include "iwl-power.h"
#include "iwl-sta.h"
#include "iwl-helpers.h"
+#include "iwl-agn.h"
/*
@@ -67,30 +68,6 @@
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-
-/* This function both allocates and initializes hw and priv. */
-struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
-{
- struct iwl_priv *priv;
- /* mac80211 allocates memory for this device instance, including
- * space for this driver's private structure */
- struct ieee80211_hw *hw;
-
- hw = ieee80211_alloc_hw(sizeof(struct iwl_priv),
- cfg->ops->ieee80211_ops);
- if (hw == NULL) {
- pr_err("%s: Can not allocate network device\n",
- cfg->name);
- goto out;
- }
-
- priv = hw->priv;
- priv->hw = hw;
-
-out:
- return hw;
-}
-
#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
@@ -118,7 +95,7 @@
max_bit_rate = MAX_BIT_RATE_40_MHZ;
}
- if (priv->cfg->mod_params->amsdu_size_8K)
+ if (iwlagn_mod_params.amsdu_size_8K)
ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
@@ -159,6 +136,7 @@
struct ieee80211_channel *geo_ch;
struct ieee80211_rate *rates;
int i = 0;
+ s8 max_tx_power = IWLAGN_TX_POWER_TARGET_POWER_MIN;
if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
@@ -232,8 +210,8 @@
geo_ch->flags |= ch->ht40_extension_channel;
- if (ch->max_power_avg > priv->tx_power_device_lmt)
- priv->tx_power_device_lmt = ch->max_power_avg;
+ if (ch->max_power_avg > max_tx_power)
+ max_tx_power = ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
@@ -246,6 +224,10 @@
geo_ch->flags);
}
+ priv->tx_power_device_lmt = max_tx_power;
+ priv->tx_power_user_lmt = max_tx_power;
+ priv->tx_power_next = max_tx_power;
+
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
priv->cfg->sku & IWL_SKU_A) {
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
@@ -434,72 +416,72 @@
int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
struct iwl_rxon_cmd *rxon = &ctx->staging;
- bool error = false;
+ u32 errors = 0;
if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) {
IWL_WARN(priv, "check 2.4G: wrong narrow\n");
- error = true;
+ errors |= BIT(0);
}
if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) {
IWL_WARN(priv, "check 2.4G: wrong radar\n");
- error = true;
+ errors |= BIT(1);
}
} else {
if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) {
IWL_WARN(priv, "check 5.2G: not short slot!\n");
- error = true;
+ errors |= BIT(2);
}
if (rxon->flags & RXON_FLG_CCK_MSK) {
IWL_WARN(priv, "check 5.2G: CCK!\n");
- error = true;
+ errors |= BIT(3);
}
}
if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) {
IWL_WARN(priv, "mac/bssid mcast!\n");
- error = true;
+ errors |= BIT(4);
}
/* make sure basic rates 6Mbps and 1Mbps are supported */
if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 &&
(rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) {
IWL_WARN(priv, "neither 1 nor 6 are basic\n");
- error = true;
+ errors |= BIT(5);
}
if (le16_to_cpu(rxon->assoc_id) > 2007) {
IWL_WARN(priv, "aid > 2007\n");
- error = true;
+ errors |= BIT(6);
}
if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) {
IWL_WARN(priv, "CCK and short slot\n");
- error = true;
+ errors |= BIT(7);
}
if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) {
IWL_WARN(priv, "CCK and auto detect");
- error = true;
+ errors |= BIT(8);
}
if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
RXON_FLG_TGG_PROTECT_MSK)) ==
RXON_FLG_TGG_PROTECT_MSK) {
IWL_WARN(priv, "TGg but no auto-detect\n");
- error = true;
+ errors |= BIT(9);
}
- if (error)
- IWL_WARN(priv, "Tuning to channel %d\n",
- le16_to_cpu(rxon->channel));
-
- if (error) {
- IWL_ERR(priv, "Invalid RXON\n");
- return -EINVAL;
+ if (rxon->channel == 0) {
+ IWL_WARN(priv, "zero channel is invalid\n");
+ errors |= BIT(10);
}
- return 0;
+
+ WARN(errors, "Invalid RXON (%#x), channel %d",
+ errors, le16_to_cpu(rxon->channel));
+
+ return errors ? -EINVAL : 0;
}
/**
@@ -890,10 +872,21 @@
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
#endif
-/**
- * iwl_irq_handle_error - called for HW or SW error interrupt from card
- */
-void iwl_irq_handle_error(struct iwl_priv *priv)
+
+static void iwlagn_abort_notification_waits(struct iwl_priv *priv)
+{
+ unsigned long flags;
+ struct iwl_notification_wait *wait_entry;
+
+ spin_lock_irqsave(&priv->_agn.notif_wait_lock, flags);
+ list_for_each_entry(wait_entry, &priv->_agn.notif_waits, list)
+ wait_entry->aborted = true;
+ spin_unlock_irqrestore(&priv->_agn.notif_wait_lock, flags);
+
+ wake_up_all(&priv->_agn.notif_waitq);
+}
+
+void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand)
{
unsigned int reload_msec;
unsigned long reload_jiffies;
@@ -904,18 +897,64 @@
/* Cancel currently queued command. */
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+ iwlagn_abort_notification_waits(priv);
+
+ /* Keep the restart process from trying to send host
+ * commands by clearing the ready bit */
+ clear_bit(STATUS_READY, &priv->status);
+
+ wake_up_interruptible(&priv->wait_command_queue);
+
+ if (!ondemand) {
+ /*
+ * If firmware keep reloading, then it indicate something
+ * serious wrong and firmware having problem to recover
+ * from it. Instead of keep trying which will fill the syslog
+ * and hang the system, let's just stop it
+ */
+ reload_jiffies = jiffies;
+ reload_msec = jiffies_to_msecs((long) reload_jiffies -
+ (long) priv->reload_jiffies);
+ priv->reload_jiffies = reload_jiffies;
+ if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
+ priv->reload_count++;
+ if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
+ IWL_ERR(priv, "BUG_ON, Stop restarting\n");
+ return;
+ }
+ } else
+ priv->reload_count = 0;
+ }
+
+ if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ if (iwlagn_mod_params.restart_fw) {
+ IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
+ "Restarting adapter due to uCode error.\n");
+ queue_work(priv->workqueue, &priv->restart);
+ } else
+ IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
+ "Detected FW error, but not restarting\n");
+ }
+}
+
+/**
+ * iwl_irq_handle_error - called for HW or SW error interrupt from card
+ */
+void iwl_irq_handle_error(struct iwl_priv *priv)
+{
/* W/A for WiFi/WiMAX coex and WiMAX own the RF */
if (priv->cfg->internal_wimax_coex &&
(!(iwl_read_prph(priv, APMG_CLK_CTRL_REG) &
APMS_CLK_VAL_MRB_FUNC_MODE) ||
(iwl_read_prph(priv, APMG_PS_CTRL_REG) &
APMG_PS_CTRL_VAL_RESET_REQ))) {
- wake_up_interruptible(&priv->wait_command_queue);
/*
- *Keep the restart process from trying to send host
- * commands by clearing the INIT status bit
+ * Keep the restart process from trying to send host
+ * commands by clearing the ready bit.
*/
clear_bit(STATUS_READY, &priv->status);
+ clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+ wake_up_interruptible(&priv->wait_command_queue);
IWL_ERR(priv, "RF is used by WiMAX\n");
return;
}
@@ -923,50 +962,17 @@
IWL_ERR(priv, "Loaded firmware version: %s\n",
priv->hw->wiphy->fw_version);
- priv->cfg->ops->lib->dump_nic_error_log(priv);
- if (priv->cfg->ops->lib->dump_csr)
- priv->cfg->ops->lib->dump_csr(priv);
- if (priv->cfg->ops->lib->dump_fh)
- priv->cfg->ops->lib->dump_fh(priv, NULL, false);
- priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false);
+ iwl_dump_nic_error_log(priv);
+ iwl_dump_csr(priv);
+ iwl_dump_fh(priv, NULL, false);
+ iwl_dump_nic_event_log(priv, false, NULL, false);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)
iwl_print_rx_config_cmd(priv,
&priv->contexts[IWL_RXON_CTX_BSS]);
#endif
- wake_up_interruptible(&priv->wait_command_queue);
-
- /* Keep the restart process from trying to send host
- * commands by clearing the INIT status bit */
- clear_bit(STATUS_READY, &priv->status);
-
- /*
- * If firmware keep reloading, then it indicate something
- * serious wrong and firmware having problem to recover
- * from it. Instead of keep trying which will fill the syslog
- * and hang the system, let's just stop it
- */
- reload_jiffies = jiffies;
- reload_msec = jiffies_to_msecs((long) reload_jiffies -
- (long) priv->reload_jiffies);
- priv->reload_jiffies = reload_jiffies;
- if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
- priv->reload_count++;
- if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
- IWL_ERR(priv, "BUG_ON, Stop restarting\n");
- return;
- }
- } else
- priv->reload_count = 0;
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
- "Restarting adapter due to uCode error.\n");
-
- if (priv->cfg->mod_params->restart_fw)
- queue_work(priv->workqueue, &priv->restart);
- }
+ iwlagn_fw_error(priv, false);
}
static int iwl_apm_stop_master(struct iwl_priv *priv)
@@ -990,6 +996,8 @@
{
IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
+ clear_bit(STATUS_DEVICE_ENABLED, &priv->status);
+
/* Stop device's DMA activity */
iwl_apm_stop_master(priv);
@@ -1040,7 +1048,6 @@
/*
* Enable HAP INTA (interrupt from management bus) to
* wake device's PCI Express link L1a -> L0s
- * NOTE: This is no-op for 3945 (non-existent bit)
*/
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
@@ -1053,20 +1060,18 @@
* If not (unlikely), enable L0S, so there is at least some
* power savings, even without L1.
*/
- if (priv->cfg->base_params->set_l0s) {
- lctl = iwl_pcie_link_ctl(priv);
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
- PCI_CFG_LINK_CTRL_VAL_L1_EN) {
- /* L1-ASPM enabled; disable(!) L0S */
- iwl_set_bit(priv, CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
- iwl_clear_bit(priv, CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
- }
+ lctl = iwl_pcie_link_ctl(priv);
+ if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+ PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+ /* L1-ASPM enabled; disable(!) L0S */
+ iwl_set_bit(priv, CSR_GIO_REG,
+ CSR_GIO_REG_VAL_L0S_ENABLED);
+ IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
+ } else {
+ /* L1-ASPM disabled; enable(!) L0S */
+ iwl_clear_bit(priv, CSR_GIO_REG,
+ CSR_GIO_REG_VAL_L0S_ENABLED);
+ IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
}
/* Configure analog phase-lock-loop before activating to D0A */
@@ -1094,27 +1099,21 @@
}
/*
- * Enable DMA and BSM (if used) clocks, wait for them to stabilize.
- * BSM (Boostrap State Machine) is only in 3945 and 4965;
- * later devices (i.e. 5000 and later) have non-volatile SRAM,
- * and don't need BSM to restore data after power-saving sleep.
+ * Enable DMA clock and wait for it to stabilize.
*
* Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
* do not disable clocks. This preserves any hardware bits already
* set by default in "CLK_CTRL_REG" after reset.
*/
- if (priv->cfg->base_params->use_bsm)
- iwl_write_prph(priv, APMG_CLK_EN_REG,
- APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
- else
- iwl_write_prph(priv, APMG_CLK_EN_REG,
- APMG_CLK_VAL_DMA_CLK_RQT);
+ iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
udelay(20);
/* Disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+ set_bit(STATUS_DEVICE_ENABLED, &priv->status);
+
out:
return ret;
}
@@ -1430,7 +1429,6 @@
iwl_teardown_interface(priv, vif, false);
- memset(priv->bssid, 0, ETH_ALEN);
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
@@ -1750,21 +1748,13 @@
* detect failure), then fw_restart module parameter
* need to be check before performing firmware reload
*/
- if (!external && !priv->cfg->mod_params->restart_fw) {
+ if (!external && !iwlagn_mod_params.restart_fw) {
IWL_DEBUG_INFO(priv, "Cancel firmware reload based on "
"module parameter setting\n");
break;
}
IWL_ERR(priv, "On demand firmware reload\n");
- /* Set the FW error flag -- cleared on iwl_down */
- set_bit(STATUS_FW_ERROR, &priv->status);
- wake_up_interruptible(&priv->wait_command_queue);
- /*
- * Keep the restart process from trying to send host
- * commands by clearing the INIT status bit
- */
- clear_bit(STATUS_READY, &priv->status);
- queue_work(priv->workqueue, &priv->restart);
+ iwlagn_fw_error(priv, true);
break;
}
return 0;
@@ -1775,6 +1765,7 @@
{
struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+ struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_context *tmp;
u32 interface_modes;
int err;
@@ -1783,6 +1774,15 @@
mutex_lock(&priv->mutex);
+ if (!ctx->vif || !iwl_is_ready_rf(priv)) {
+ /*
+ * Huh? But wait ... this can maybe happen when
+ * we're in the middle of a firmware restart!
+ */
+ err = -EBUSY;
+ goto out;
+ }
+
interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
if (!(interface_modes & BIT(newtype))) {
@@ -1790,6 +1790,19 @@
goto out;
}
+ /*
+ * Refuse a change that should be done by moving from the PAN
+ * context to the BSS context instead, if the BSS context is
+ * available and can support the new interface type.
+ */
+ if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif &&
+ (bss_ctx->interface_modes & BIT(newtype) ||
+ bss_ctx->exclusive_interface_modes & BIT(newtype))) {
+ BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+ err = -EBUSY;
+ goto out;
+ }
+
if (ctx->exclusive_interface_modes & BIT(newtype)) {
for_each_context(priv, tmp) {
if (ctx == tmp)
@@ -1810,6 +1823,7 @@
/* success */
iwl_teardown_interface(priv, vif, true);
vif->type = newtype;
+ vif->p2p = newp2p;
err = iwl_setup_interface(priv, ctx);
WARN_ON(err);
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index b316d83..5b5b0cce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -73,7 +73,7 @@
#define IWLWIFI_VERSION "in-tree:"
-#define DRV_COPYRIGHT "Copyright(c) 2003-2010 Intel Corporation"
+#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
#define DRV_AUTHOR "<ilw@linux.intel.com>"
#define IWL_PCI_DEVICE(dev, subdev, cfg) \
@@ -90,7 +90,6 @@
#define IWL_CMD(x) case x: return #x
struct iwl_hcmd_ops {
- int (*rxon_assoc)(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
int (*commit_rxon)(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
void (*set_rxon_chain)(struct iwl_priv *priv,
struct iwl_rxon_context *ctx);
@@ -100,7 +99,6 @@
};
struct iwl_hcmd_utils_ops {
- u16 (*get_hcmd_size)(u8 cmd_id, u16 len);
u16 (*build_addsta_hcmd)(const struct iwl_addsta_cmd *cmd, u8 *data);
void (*gain_computation)(struct iwl_priv *priv,
u32 *average_noise,
@@ -122,46 +120,14 @@
void (*config)(struct iwl_priv *priv);
};
-struct iwl_isr_ops {
- irqreturn_t (*isr) (int irq, void *data);
- void (*free)(struct iwl_priv *priv);
- int (*alloc)(struct iwl_priv *priv);
- int (*reset)(struct iwl_priv *priv);
- void (*disable)(struct iwl_priv *priv);
-};
-
-struct iwl_debugfs_ops {
- ssize_t (*rx_stats_read)(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
- ssize_t (*tx_stats_read)(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
- ssize_t (*general_stats_read)(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
- ssize_t (*bt_stats_read)(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
- ssize_t (*reply_tx_error)(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-};
-
struct iwl_temp_ops {
void (*temperature)(struct iwl_priv *priv);
};
-struct iwl_tt_ops {
- bool (*lower_power_detection)(struct iwl_priv *priv);
- u8 (*tt_power_mode)(struct iwl_priv *priv);
- bool (*ct_kill_check)(struct iwl_priv *priv);
-};
-
struct iwl_lib_ops {
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
/* Handling TX */
- void (*txq_update_byte_cnt_tbl)(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- u16 byte_cnt);
- void (*txq_inval_byte_cnt_tbl)(struct iwl_priv *priv,
- struct iwl_tx_queue *txq);
void (*txq_set_sched)(struct iwl_priv *priv, u32 mask);
int (*txq_attach_buf_to_tfd)(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
@@ -171,30 +137,14 @@
struct iwl_tx_queue *txq);
int (*txq_init)(struct iwl_priv *priv,
struct iwl_tx_queue *txq);
- /* aggregations */
- int (*txq_agg_enable)(struct iwl_priv *priv, int txq_id, int tx_fifo,
- int sta_id, int tid, u16 ssn_idx);
- int (*txq_agg_disable)(struct iwl_priv *priv, u16 txq_id, u16 ssn_idx,
- u8 tx_fifo);
/* setup Rx handler */
void (*rx_handler_setup)(struct iwl_priv *priv);
/* setup deferred work */
void (*setup_deferred_work)(struct iwl_priv *priv);
/* cancel deferred work */
void (*cancel_deferred_work)(struct iwl_priv *priv);
- /* alive notification after init uCode load */
- void (*init_alive_start)(struct iwl_priv *priv);
- /* alive notification */
- int (*alive_notify)(struct iwl_priv *priv);
/* check validity of rtc data address */
int (*is_valid_rtc_data_addr)(u32 addr);
- /* 1st ucode load */
- int (*load_ucode)(struct iwl_priv *priv);
- int (*dump_nic_event_log)(struct iwl_priv *priv,
- bool full_log, char **buf, bool display);
- void (*dump_nic_error_log)(struct iwl_priv *priv);
- void (*dump_csr)(struct iwl_priv *priv);
- int (*dump_fh)(struct iwl_priv *priv, char **buf, bool display);
int (*set_channel_switch)(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch);
/* power management */
@@ -204,9 +154,6 @@
int (*send_tx_power) (struct iwl_priv *priv);
void (*update_chain_flags)(struct iwl_priv *priv);
- /* isr */
- struct iwl_isr_ops isr_ops;
-
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
@@ -216,14 +163,6 @@
int (*txfifo_flush)(struct iwl_priv *priv, u16 flush_control);
void (*dev_txfifo_flush)(struct iwl_priv *priv, u16 flush_control);
- struct iwl_debugfs_ops debugfs_ops;
-
- /* thermal throttling */
- struct iwl_tt_ops tt_ops;
-};
-
-struct iwl_led_ops {
- int (*cmd)(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd);
};
/* NIC specific ops */
@@ -231,28 +170,15 @@
void (*additional_nic_config)(struct iwl_priv *priv);
};
-struct iwl_legacy_ops {
- void (*post_associate)(struct iwl_priv *priv);
- void (*config_ap)(struct iwl_priv *priv);
- /* station management */
- int (*update_bcast_stations)(struct iwl_priv *priv);
- int (*manage_ibss_station)(struct iwl_priv *priv,
- struct ieee80211_vif *vif, bool add);
-};
-
struct iwl_ops {
const struct iwl_lib_ops *lib;
const struct iwl_hcmd_ops *hcmd;
const struct iwl_hcmd_utils_ops *utils;
- const struct iwl_led_ops *led;
const struct iwl_nic_ops *nic;
- const struct iwl_legacy_ops *legacy;
- const struct ieee80211_ops *ieee80211_ops;
};
struct iwl_mod_params {
int sw_crypto; /* def: 0 = using hardware encryption */
- int disable_hw_scan; /* def: 0 = use h/w scan */
int num_of_queues; /* def: HW dependent */
int disable_11n; /* def: 0 = 11n capabilities enabled */
int amsdu_size_8K; /* def: 1 = enable 8K amsdu size */
@@ -278,16 +204,7 @@
* @wd_timeout: TX queues watchdog timeout
* @temperature_kelvin: temperature report by uCode in kelvin
* @max_event_log_size: size of event log buffer size for ucode event logging
- * @tx_power_by_driver: tx power calibration performed by driver
- * instead of uCode
- * @ucode_tracing: support ucode continuous tracing
- * @sensitivity_calib_by_driver: driver has the capability to perform
- * sensitivity calibration operation
- * @chain_noise_calib_by_driver: driver has the capability to perform
- * chain noise calibration operation
* @shadow_reg_enable: HW shadhow register bit
- * @no_agg_framecnt_info: uCode do not provide aggregation frame count
- * information
*/
struct iwl_base_params {
int eeprom_size;
@@ -295,14 +212,10 @@
int num_of_ampdu_queues;/* def: HW dependent */
/* for iwl_apm_init() */
u32 pll_cfg_val;
- bool set_l0s;
- bool use_bsm;
- bool use_isr_legacy;
const u16 max_ll_items;
const bool shadow_ram_support;
u16 led_compensation;
- const bool broken_powersave;
int chain_noise_num_beacons;
bool adv_thermal_throttle;
bool support_ct_kill_exit;
@@ -312,18 +225,12 @@
unsigned int wd_timeout;
bool temperature_kelvin;
u32 max_event_log_size;
- const bool tx_power_by_driver;
- const bool ucode_tracing;
- const bool sensitivity_calib_by_driver;
- const bool chain_noise_calib_by_driver;
const bool shadow_reg_enable;
- const bool no_agg_framecnt_info;
};
/*
* @advanced_bt_coexist: support advanced bt coexist
* @bt_init_traffic_load: specify initial bt traffic load
* @bt_prio_boost: default bt priority boost value
- * @bt_statistics: use BT version of statistics notification
* @agg_time_limit: maximum number of uSec in aggregation
* @ampdu_factor: Maximum A-MPDU length factor
* @ampdu_density: Minimum A-MPDU spacing
@@ -333,7 +240,6 @@
bool advanced_bt_coexist;
u8 bt_init_traffic_load;
u8 bt_prio_boost;
- const bool bt_statistics;
u16 agg_time_limit;
u8 ampdu_factor;
u8 ampdu_density;
@@ -364,6 +270,7 @@
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @iq_invert: I/Q inversion
+ * @disable_otp_refresh: disable OTP refresh current limit
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -398,8 +305,6 @@
u16 eeprom_ver;
u16 eeprom_calib_ver;
const struct iwl_ops *ops;
- /* module based parameters which can be set from modprobe cmd */
- const struct iwl_mod_params *mod_params;
/* params not likely to change within a device family */
struct iwl_base_params *base_params;
/* params likely to change within a device family */
@@ -414,13 +319,13 @@
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
const bool iq_invert;
+ const bool disable_otp_refresh;
};
/***************************
* L i b *
***************************/
-struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg);
int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw);
@@ -625,6 +530,8 @@
void iwl_dump_nic_error_log(struct iwl_priv *priv);
int iwl_dump_nic_event_log(struct iwl_priv *priv,
bool full_log, char **buf, bool display);
+void iwl_dump_csr(struct iwl_priv *priv);
+int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display);
#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
struct iwl_rxon_context *ctx);
@@ -662,6 +569,7 @@
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
+#define STATUS_DEVICE_ENABLED 18
static inline int iwl_is_ready(struct iwl_priv *priv)
@@ -714,11 +622,6 @@
int iwl_apm_init(struct iwl_priv *priv);
int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
-static inline int iwl_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- return priv->cfg->ops->hcmd->rxon_assoc(priv, ctx);
-}
static inline int iwlcore_commit_rxon(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
@@ -736,12 +639,10 @@
priv->cfg->bt_params->advanced_bt_coexist;
}
-static inline bool iwl_bt_statistics(struct iwl_priv *priv)
-{
- return priv->cfg->bt_params && priv->cfg->bt_params->bt_statistics;
-}
-
extern bool bt_coex_active;
extern bool bt_siso_mode;
+
+void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand);
+
#endif /* __iwl_core_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index f52bc04..5ab90ba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -155,18 +155,10 @@
#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250)
/* Bits for CSR_HW_IF_CONFIG_REG */
-#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00)
#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
-#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100)
-#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200)
-#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400)
-#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800)
-#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000)
-#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000)
-
#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
@@ -186,7 +178,7 @@
#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
-#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */
+#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */
#define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
#define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
@@ -202,29 +194,17 @@
/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
#define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */
#define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
-#define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */
#define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
#define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
-#define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */
#define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
#define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
-#define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
- CSR39_FH_INT_BIT_RX_CHNL2 | \
- CSR_FH_INT_BIT_RX_CHNL1 | \
- CSR_FH_INT_BIT_RX_CHNL0)
+#define CSR_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
+ CSR_FH_INT_BIT_RX_CHNL1 | \
+ CSR_FH_INT_BIT_RX_CHNL0)
-
-#define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \
- CSR_FH_INT_BIT_TX_CHNL1 | \
- CSR_FH_INT_BIT_TX_CHNL0)
-
-#define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
- CSR_FH_INT_BIT_RX_CHNL1 | \
- CSR_FH_INT_BIT_RX_CHNL0)
-
-#define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \
- CSR_FH_INT_BIT_TX_CHNL0)
+#define CSR_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \
+ CSR_FH_INT_BIT_TX_CHNL0)
/* GPIO */
#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200)
@@ -268,7 +248,7 @@
* Indicates MAC (ucode processor, etc.) is powered up and can run.
* Internal resources are accessible.
* NOTE: This does not indicate that the processor is actually running.
- * NOTE: This does not indicate that 4965 or 3945 has completed
+ * NOTE: This does not indicate that device has completed
* init or post-power-down restore of internal SRAM memory.
* Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
* SRAM is restored and uCode is in normal operation mode.
@@ -291,8 +271,6 @@
/* HW REV */
#define CSR_HW_REV_TYPE_MSK (0x00001F0)
-#define CSR_HW_REV_TYPE_3945 (0x00000D0)
-#define CSR_HW_REV_TYPE_4965 (0x0000000)
#define CSR_HW_REV_TYPE_5300 (0x0000020)
#define CSR_HW_REV_TYPE_5350 (0x0000030)
#define CSR_HW_REV_TYPE_5100 (0x0000050)
@@ -363,7 +341,7 @@
* 0: MAC_SLEEP
* uCode sets this when preparing a power-saving power-down.
* uCode resets this when power-up is complete and SRAM is sane.
- * NOTE: 3945/4965 saves internal SRAM data to host when powering down,
+ * NOTE: device saves internal SRAM data to host when powering down,
* and must restore this data after powering back up.
* MAC_SLEEP is the best indication that restore is complete.
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
@@ -394,7 +372,6 @@
#define CSR_LED_REG_TRUN_OFF (0x38)
/* ANA_PLL */
-#define CSR39_ANA_PLL_CFG_VAL (0x01000000)
#define CSR50_ANA_PLL_CFG_VAL (0x00880300)
/* HPET MEM debug */
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index ebdea3b..2824ccb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project.
*
@@ -146,7 +146,6 @@
#define IWL_DL_RX (1 << 24)
#define IWL_DL_ISR (1 << 25)
#define IWL_DL_HT (1 << 26)
-#define IWL_DL_IO (1 << 27)
/* 0xF0000000 - 0x10000000 */
#define IWL_DL_11H (1 << 28)
#define IWL_DL_STATS (1 << 29)
@@ -174,7 +173,6 @@
IWL_DEBUG_LIMIT(p, IWL_DL_DROP, f, ## a)
#define IWL_DEBUG_AP(p, f, a...) IWL_DEBUG(p, IWL_DL_AP, f, ## a)
#define IWL_DEBUG_TXPOWER(p, f, a...) IWL_DEBUG(p, IWL_DL_TXPOWER, f, ## a)
-#define IWL_DEBUG_IO(p, f, a...) IWL_DEBUG(p, IWL_DL_IO, f, ## a)
#define IWL_DEBUG_RATE(p, f, a...) IWL_DEBUG(p, IWL_DL_RATE, f, ## a)
#define IWL_DEBUG_RATE_LIMIT(p, f, a...) \
IWL_DEBUG_LIMIT(p, IWL_DL_RATE, f, ## a)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 8842411..0e6a04b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -39,6 +39,7 @@
#include "iwl-debug.h"
#include "iwl-core.h"
#include "iwl-io.h"
+#include "iwl-agn.h"
/* create and remove of files */
#define DEBUGFS_ADD_FILE(name, parent, mode) do { \
@@ -226,10 +227,10 @@
/* default is to dump the entire data segment */
if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
priv->dbgfs_sram_offset = 0x800000;
- if (priv->ucode_type == UCODE_INIT)
- priv->dbgfs_sram_len = priv->ucode_init_data.len;
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT)
+ priv->dbgfs_sram_len = priv->ucode_init.data.len;
else
- priv->dbgfs_sram_len = priv->ucode_data.len;
+ priv->dbgfs_sram_len = priv->ucode_rt.data.len;
}
len = priv->dbgfs_sram_len;
@@ -437,8 +438,7 @@
int pos = 0;
ssize_t ret = -ENOMEM;
- ret = pos = priv->cfg->ops->lib->dump_nic_event_log(
- priv, true, &buf, true);
+ ret = pos = iwl_dump_nic_event_log(priv, true, &buf, true);
if (buf) {
ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
kfree(buf);
@@ -462,8 +462,7 @@
if (sscanf(buf, "%d", &event_log_flag) != 1)
return -EFAULT;
if (event_log_flag == 1)
- priv->cfg->ops->lib->dump_nic_event_log(priv, true,
- NULL, false);
+ iwl_dump_nic_event_log(priv, true, NULL, false);
return count;
}
@@ -1039,13 +1038,463 @@
return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
}
+static const char *fmt_value = " %-30s %10u\n";
+static const char *fmt_hex = " %-30s 0x%02X\n";
+static const char *fmt_table = " %-30s %10u %10u %10u %10u\n";
+static const char *fmt_header =
+ "%-32s current cumulative delta max\n";
+
+static int iwl_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
+{
+ int p = 0;
+ u32 flag;
+
+ flag = le32_to_cpu(priv->statistics.flag);
+
+ p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n", flag);
+ if (flag & UCODE_STATISTICS_CLEAR_MSK)
+ p += scnprintf(buf + p, bufsz - p,
+ "\tStatistics have been cleared\n");
+ p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n",
+ (flag & UCODE_STATISTICS_FREQUENCY_MSK)
+ ? "2.4 GHz" : "5.2 GHz");
+ p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n",
+ (flag & UCODE_STATISTICS_NARROW_BAND_MSK)
+ ? "enabled" : "disabled");
+
+ return p;
+}
+
static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct iwl_priv *priv = file->private_data;
- return priv->cfg->ops->lib->debugfs_ops.rx_stats_read(file,
- user_buf, count, ppos);
+ int pos = 0;
+ char *buf;
+ int bufsz = sizeof(struct statistics_rx_phy) * 40 +
+ sizeof(struct statistics_rx_non_phy) * 40 +
+ sizeof(struct statistics_rx_ht_phy) * 40 + 400;
+ ssize_t ret;
+ struct statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
+ struct statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
+ struct statistics_rx_non_phy *general, *accum_general;
+ struct statistics_rx_non_phy *delta_general, *max_general;
+ struct statistics_rx_ht_phy *ht, *accum_ht, *delta_ht, *max_ht;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ ofdm = &priv->statistics.rx_ofdm;
+ cck = &priv->statistics.rx_cck;
+ general = &priv->statistics.rx_non_phy;
+ ht = &priv->statistics.rx_ofdm_ht;
+ accum_ofdm = &priv->accum_stats.rx_ofdm;
+ accum_cck = &priv->accum_stats.rx_cck;
+ accum_general = &priv->accum_stats.rx_non_phy;
+ accum_ht = &priv->accum_stats.rx_ofdm_ht;
+ delta_ofdm = &priv->delta_stats.rx_ofdm;
+ delta_cck = &priv->delta_stats.rx_cck;
+ delta_general = &priv->delta_stats.rx_non_phy;
+ delta_ht = &priv->delta_stats.rx_ofdm_ht;
+ max_ofdm = &priv->max_delta_stats.rx_ofdm;
+ max_cck = &priv->max_delta_stats.rx_cck;
+ max_general = &priv->max_delta_stats.rx_non_phy;
+ max_ht = &priv->max_delta_stats.rx_ofdm_ht;
+
+ pos += iwl_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_header, "Statistics_Rx - OFDM:");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "ina_cnt:",
+ le32_to_cpu(ofdm->ina_cnt),
+ accum_ofdm->ina_cnt,
+ delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "fina_cnt:",
+ le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
+ delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "plcp_err:",
+ le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
+ delta_ofdm->plcp_err, max_ofdm->plcp_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "crc32_err:",
+ le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
+ delta_ofdm->crc32_err, max_ofdm->crc32_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "overrun_err:",
+ le32_to_cpu(ofdm->overrun_err),
+ accum_ofdm->overrun_err, delta_ofdm->overrun_err,
+ max_ofdm->overrun_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "early_overrun_err:",
+ le32_to_cpu(ofdm->early_overrun_err),
+ accum_ofdm->early_overrun_err,
+ delta_ofdm->early_overrun_err,
+ max_ofdm->early_overrun_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "crc32_good:",
+ le32_to_cpu(ofdm->crc32_good),
+ accum_ofdm->crc32_good, delta_ofdm->crc32_good,
+ max_ofdm->crc32_good);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "false_alarm_cnt:",
+ le32_to_cpu(ofdm->false_alarm_cnt),
+ accum_ofdm->false_alarm_cnt,
+ delta_ofdm->false_alarm_cnt,
+ max_ofdm->false_alarm_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "fina_sync_err_cnt:",
+ le32_to_cpu(ofdm->fina_sync_err_cnt),
+ accum_ofdm->fina_sync_err_cnt,
+ delta_ofdm->fina_sync_err_cnt,
+ max_ofdm->fina_sync_err_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sfd_timeout:",
+ le32_to_cpu(ofdm->sfd_timeout),
+ accum_ofdm->sfd_timeout, delta_ofdm->sfd_timeout,
+ max_ofdm->sfd_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "fina_timeout:",
+ le32_to_cpu(ofdm->fina_timeout),
+ accum_ofdm->fina_timeout, delta_ofdm->fina_timeout,
+ max_ofdm->fina_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "unresponded_rts:",
+ le32_to_cpu(ofdm->unresponded_rts),
+ accum_ofdm->unresponded_rts,
+ delta_ofdm->unresponded_rts,
+ max_ofdm->unresponded_rts);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "rxe_frame_lmt_ovrun:",
+ le32_to_cpu(ofdm->rxe_frame_limit_overrun),
+ accum_ofdm->rxe_frame_limit_overrun,
+ delta_ofdm->rxe_frame_limit_overrun,
+ max_ofdm->rxe_frame_limit_overrun);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sent_ack_cnt:",
+ le32_to_cpu(ofdm->sent_ack_cnt),
+ accum_ofdm->sent_ack_cnt, delta_ofdm->sent_ack_cnt,
+ max_ofdm->sent_ack_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sent_cts_cnt:",
+ le32_to_cpu(ofdm->sent_cts_cnt),
+ accum_ofdm->sent_cts_cnt, delta_ofdm->sent_cts_cnt,
+ max_ofdm->sent_cts_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sent_ba_rsp_cnt:",
+ le32_to_cpu(ofdm->sent_ba_rsp_cnt),
+ accum_ofdm->sent_ba_rsp_cnt,
+ delta_ofdm->sent_ba_rsp_cnt,
+ max_ofdm->sent_ba_rsp_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "dsp_self_kill:",
+ le32_to_cpu(ofdm->dsp_self_kill),
+ accum_ofdm->dsp_self_kill,
+ delta_ofdm->dsp_self_kill,
+ max_ofdm->dsp_self_kill);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "mh_format_err:",
+ le32_to_cpu(ofdm->mh_format_err),
+ accum_ofdm->mh_format_err,
+ delta_ofdm->mh_format_err,
+ max_ofdm->mh_format_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "re_acq_main_rssi_sum:",
+ le32_to_cpu(ofdm->re_acq_main_rssi_sum),
+ accum_ofdm->re_acq_main_rssi_sum,
+ delta_ofdm->re_acq_main_rssi_sum,
+ max_ofdm->re_acq_main_rssi_sum);
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_header, "Statistics_Rx - CCK:");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "ina_cnt:",
+ le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
+ delta_cck->ina_cnt, max_cck->ina_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "fina_cnt:",
+ le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
+ delta_cck->fina_cnt, max_cck->fina_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "plcp_err:",
+ le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
+ delta_cck->plcp_err, max_cck->plcp_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "crc32_err:",
+ le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
+ delta_cck->crc32_err, max_cck->crc32_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "overrun_err:",
+ le32_to_cpu(cck->overrun_err),
+ accum_cck->overrun_err, delta_cck->overrun_err,
+ max_cck->overrun_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "early_overrun_err:",
+ le32_to_cpu(cck->early_overrun_err),
+ accum_cck->early_overrun_err,
+ delta_cck->early_overrun_err,
+ max_cck->early_overrun_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "crc32_good:",
+ le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
+ delta_cck->crc32_good, max_cck->crc32_good);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "false_alarm_cnt:",
+ le32_to_cpu(cck->false_alarm_cnt),
+ accum_cck->false_alarm_cnt,
+ delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "fina_sync_err_cnt:",
+ le32_to_cpu(cck->fina_sync_err_cnt),
+ accum_cck->fina_sync_err_cnt,
+ delta_cck->fina_sync_err_cnt,
+ max_cck->fina_sync_err_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sfd_timeout:",
+ le32_to_cpu(cck->sfd_timeout),
+ accum_cck->sfd_timeout, delta_cck->sfd_timeout,
+ max_cck->sfd_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "fina_timeout:",
+ le32_to_cpu(cck->fina_timeout),
+ accum_cck->fina_timeout, delta_cck->fina_timeout,
+ max_cck->fina_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "unresponded_rts:",
+ le32_to_cpu(cck->unresponded_rts),
+ accum_cck->unresponded_rts, delta_cck->unresponded_rts,
+ max_cck->unresponded_rts);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "rxe_frame_lmt_ovrun:",
+ le32_to_cpu(cck->rxe_frame_limit_overrun),
+ accum_cck->rxe_frame_limit_overrun,
+ delta_cck->rxe_frame_limit_overrun,
+ max_cck->rxe_frame_limit_overrun);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sent_ack_cnt:",
+ le32_to_cpu(cck->sent_ack_cnt),
+ accum_cck->sent_ack_cnt, delta_cck->sent_ack_cnt,
+ max_cck->sent_ack_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sent_cts_cnt:",
+ le32_to_cpu(cck->sent_cts_cnt),
+ accum_cck->sent_cts_cnt, delta_cck->sent_cts_cnt,
+ max_cck->sent_cts_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sent_ba_rsp_cnt:",
+ le32_to_cpu(cck->sent_ba_rsp_cnt),
+ accum_cck->sent_ba_rsp_cnt,
+ delta_cck->sent_ba_rsp_cnt,
+ max_cck->sent_ba_rsp_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "dsp_self_kill:",
+ le32_to_cpu(cck->dsp_self_kill),
+ accum_cck->dsp_self_kill, delta_cck->dsp_self_kill,
+ max_cck->dsp_self_kill);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "mh_format_err:",
+ le32_to_cpu(cck->mh_format_err),
+ accum_cck->mh_format_err, delta_cck->mh_format_err,
+ max_cck->mh_format_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "re_acq_main_rssi_sum:",
+ le32_to_cpu(cck->re_acq_main_rssi_sum),
+ accum_cck->re_acq_main_rssi_sum,
+ delta_cck->re_acq_main_rssi_sum,
+ max_cck->re_acq_main_rssi_sum);
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_header, "Statistics_Rx - GENERAL:");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "bogus_cts:",
+ le32_to_cpu(general->bogus_cts),
+ accum_general->bogus_cts, delta_general->bogus_cts,
+ max_general->bogus_cts);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "bogus_ack:",
+ le32_to_cpu(general->bogus_ack),
+ accum_general->bogus_ack, delta_general->bogus_ack,
+ max_general->bogus_ack);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "non_bssid_frames:",
+ le32_to_cpu(general->non_bssid_frames),
+ accum_general->non_bssid_frames,
+ delta_general->non_bssid_frames,
+ max_general->non_bssid_frames);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "filtered_frames:",
+ le32_to_cpu(general->filtered_frames),
+ accum_general->filtered_frames,
+ delta_general->filtered_frames,
+ max_general->filtered_frames);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "non_channel_beacons:",
+ le32_to_cpu(general->non_channel_beacons),
+ accum_general->non_channel_beacons,
+ delta_general->non_channel_beacons,
+ max_general->non_channel_beacons);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "channel_beacons:",
+ le32_to_cpu(general->channel_beacons),
+ accum_general->channel_beacons,
+ delta_general->channel_beacons,
+ max_general->channel_beacons);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "num_missed_bcon:",
+ le32_to_cpu(general->num_missed_bcon),
+ accum_general->num_missed_bcon,
+ delta_general->num_missed_bcon,
+ max_general->num_missed_bcon);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "adc_rx_saturation_time:",
+ le32_to_cpu(general->adc_rx_saturation_time),
+ accum_general->adc_rx_saturation_time,
+ delta_general->adc_rx_saturation_time,
+ max_general->adc_rx_saturation_time);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "ina_detect_search_tm:",
+ le32_to_cpu(general->ina_detection_search_time),
+ accum_general->ina_detection_search_time,
+ delta_general->ina_detection_search_time,
+ max_general->ina_detection_search_time);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_silence_rssi_a:",
+ le32_to_cpu(general->beacon_silence_rssi_a),
+ accum_general->beacon_silence_rssi_a,
+ delta_general->beacon_silence_rssi_a,
+ max_general->beacon_silence_rssi_a);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_silence_rssi_b:",
+ le32_to_cpu(general->beacon_silence_rssi_b),
+ accum_general->beacon_silence_rssi_b,
+ delta_general->beacon_silence_rssi_b,
+ max_general->beacon_silence_rssi_b);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_silence_rssi_c:",
+ le32_to_cpu(general->beacon_silence_rssi_c),
+ accum_general->beacon_silence_rssi_c,
+ delta_general->beacon_silence_rssi_c,
+ max_general->beacon_silence_rssi_c);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "interference_data_flag:",
+ le32_to_cpu(general->interference_data_flag),
+ accum_general->interference_data_flag,
+ delta_general->interference_data_flag,
+ max_general->interference_data_flag);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "channel_load:",
+ le32_to_cpu(general->channel_load),
+ accum_general->channel_load,
+ delta_general->channel_load,
+ max_general->channel_load);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "dsp_false_alarms:",
+ le32_to_cpu(general->dsp_false_alarms),
+ accum_general->dsp_false_alarms,
+ delta_general->dsp_false_alarms,
+ max_general->dsp_false_alarms);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_rssi_a:",
+ le32_to_cpu(general->beacon_rssi_a),
+ accum_general->beacon_rssi_a,
+ delta_general->beacon_rssi_a,
+ max_general->beacon_rssi_a);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_rssi_b:",
+ le32_to_cpu(general->beacon_rssi_b),
+ accum_general->beacon_rssi_b,
+ delta_general->beacon_rssi_b,
+ max_general->beacon_rssi_b);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_rssi_c:",
+ le32_to_cpu(general->beacon_rssi_c),
+ accum_general->beacon_rssi_c,
+ delta_general->beacon_rssi_c,
+ max_general->beacon_rssi_c);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_energy_a:",
+ le32_to_cpu(general->beacon_energy_a),
+ accum_general->beacon_energy_a,
+ delta_general->beacon_energy_a,
+ max_general->beacon_energy_a);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_energy_b:",
+ le32_to_cpu(general->beacon_energy_b),
+ accum_general->beacon_energy_b,
+ delta_general->beacon_energy_b,
+ max_general->beacon_energy_b);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "beacon_energy_c:",
+ le32_to_cpu(general->beacon_energy_c),
+ accum_general->beacon_energy_c,
+ delta_general->beacon_energy_c,
+ max_general->beacon_energy_c);
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_header, "Statistics_Rx - OFDM_HT:");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "plcp_err:",
+ le32_to_cpu(ht->plcp_err), accum_ht->plcp_err,
+ delta_ht->plcp_err, max_ht->plcp_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "overrun_err:",
+ le32_to_cpu(ht->overrun_err), accum_ht->overrun_err,
+ delta_ht->overrun_err, max_ht->overrun_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "early_overrun_err:",
+ le32_to_cpu(ht->early_overrun_err),
+ accum_ht->early_overrun_err,
+ delta_ht->early_overrun_err,
+ max_ht->early_overrun_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "crc32_good:",
+ le32_to_cpu(ht->crc32_good), accum_ht->crc32_good,
+ delta_ht->crc32_good, max_ht->crc32_good);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "crc32_err:",
+ le32_to_cpu(ht->crc32_err), accum_ht->crc32_err,
+ delta_ht->crc32_err, max_ht->crc32_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "mh_format_err:",
+ le32_to_cpu(ht->mh_format_err),
+ accum_ht->mh_format_err,
+ delta_ht->mh_format_err, max_ht->mh_format_err);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg_crc32_good:",
+ le32_to_cpu(ht->agg_crc32_good),
+ accum_ht->agg_crc32_good,
+ delta_ht->agg_crc32_good, max_ht->agg_crc32_good);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg_mpdu_cnt:",
+ le32_to_cpu(ht->agg_mpdu_cnt),
+ accum_ht->agg_mpdu_cnt,
+ delta_ht->agg_mpdu_cnt, max_ht->agg_mpdu_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg_cnt:",
+ le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt,
+ delta_ht->agg_cnt, max_ht->agg_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "unsupport_mcs:",
+ le32_to_cpu(ht->unsupport_mcs),
+ accum_ht->unsupport_mcs,
+ delta_ht->unsupport_mcs, max_ht->unsupport_mcs);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
}
static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
@@ -1053,8 +1502,190 @@
size_t count, loff_t *ppos)
{
struct iwl_priv *priv = file->private_data;
- return priv->cfg->ops->lib->debugfs_ops.tx_stats_read(file,
- user_buf, count, ppos);
+ int pos = 0;
+ char *buf;
+ int bufsz = (sizeof(struct statistics_tx) * 48) + 250;
+ ssize_t ret;
+ struct statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /* the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ tx = &priv->statistics.tx;
+ accum_tx = &priv->accum_stats.tx;
+ delta_tx = &priv->delta_stats.tx;
+ max_tx = &priv->max_delta_stats.tx;
+
+ pos += iwl_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_header, "Statistics_Tx:");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "preamble:",
+ le32_to_cpu(tx->preamble_cnt),
+ accum_tx->preamble_cnt,
+ delta_tx->preamble_cnt, max_tx->preamble_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "rx_detected_cnt:",
+ le32_to_cpu(tx->rx_detected_cnt),
+ accum_tx->rx_detected_cnt,
+ delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "bt_prio_defer_cnt:",
+ le32_to_cpu(tx->bt_prio_defer_cnt),
+ accum_tx->bt_prio_defer_cnt,
+ delta_tx->bt_prio_defer_cnt,
+ max_tx->bt_prio_defer_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "bt_prio_kill_cnt:",
+ le32_to_cpu(tx->bt_prio_kill_cnt),
+ accum_tx->bt_prio_kill_cnt,
+ delta_tx->bt_prio_kill_cnt,
+ max_tx->bt_prio_kill_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "few_bytes_cnt:",
+ le32_to_cpu(tx->few_bytes_cnt),
+ accum_tx->few_bytes_cnt,
+ delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "cts_timeout:",
+ le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
+ delta_tx->cts_timeout, max_tx->cts_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "ack_timeout:",
+ le32_to_cpu(tx->ack_timeout),
+ accum_tx->ack_timeout,
+ delta_tx->ack_timeout, max_tx->ack_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "expected_ack_cnt:",
+ le32_to_cpu(tx->expected_ack_cnt),
+ accum_tx->expected_ack_cnt,
+ delta_tx->expected_ack_cnt,
+ max_tx->expected_ack_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "actual_ack_cnt:",
+ le32_to_cpu(tx->actual_ack_cnt),
+ accum_tx->actual_ack_cnt,
+ delta_tx->actual_ack_cnt,
+ max_tx->actual_ack_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "dump_msdu_cnt:",
+ le32_to_cpu(tx->dump_msdu_cnt),
+ accum_tx->dump_msdu_cnt,
+ delta_tx->dump_msdu_cnt,
+ max_tx->dump_msdu_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "abort_nxt_frame_mismatch:",
+ le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt),
+ accum_tx->burst_abort_next_frame_mismatch_cnt,
+ delta_tx->burst_abort_next_frame_mismatch_cnt,
+ max_tx->burst_abort_next_frame_mismatch_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "abort_missing_nxt_frame:",
+ le32_to_cpu(tx->burst_abort_missing_next_frame_cnt),
+ accum_tx->burst_abort_missing_next_frame_cnt,
+ delta_tx->burst_abort_missing_next_frame_cnt,
+ max_tx->burst_abort_missing_next_frame_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "cts_timeout_collision:",
+ le32_to_cpu(tx->cts_timeout_collision),
+ accum_tx->cts_timeout_collision,
+ delta_tx->cts_timeout_collision,
+ max_tx->cts_timeout_collision);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "ack_ba_timeout_collision:",
+ le32_to_cpu(tx->ack_or_ba_timeout_collision),
+ accum_tx->ack_or_ba_timeout_collision,
+ delta_tx->ack_or_ba_timeout_collision,
+ max_tx->ack_or_ba_timeout_collision);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg ba_timeout:",
+ le32_to_cpu(tx->agg.ba_timeout),
+ accum_tx->agg.ba_timeout,
+ delta_tx->agg.ba_timeout,
+ max_tx->agg.ba_timeout);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg ba_resched_frames:",
+ le32_to_cpu(tx->agg.ba_reschedule_frames),
+ accum_tx->agg.ba_reschedule_frames,
+ delta_tx->agg.ba_reschedule_frames,
+ max_tx->agg.ba_reschedule_frames);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg scd_query_agg_frame:",
+ le32_to_cpu(tx->agg.scd_query_agg_frame_cnt),
+ accum_tx->agg.scd_query_agg_frame_cnt,
+ delta_tx->agg.scd_query_agg_frame_cnt,
+ max_tx->agg.scd_query_agg_frame_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg scd_query_no_agg:",
+ le32_to_cpu(tx->agg.scd_query_no_agg),
+ accum_tx->agg.scd_query_no_agg,
+ delta_tx->agg.scd_query_no_agg,
+ max_tx->agg.scd_query_no_agg);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg scd_query_agg:",
+ le32_to_cpu(tx->agg.scd_query_agg),
+ accum_tx->agg.scd_query_agg,
+ delta_tx->agg.scd_query_agg,
+ max_tx->agg.scd_query_agg);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg scd_query_mismatch:",
+ le32_to_cpu(tx->agg.scd_query_mismatch),
+ accum_tx->agg.scd_query_mismatch,
+ delta_tx->agg.scd_query_mismatch,
+ max_tx->agg.scd_query_mismatch);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg frame_not_ready:",
+ le32_to_cpu(tx->agg.frame_not_ready),
+ accum_tx->agg.frame_not_ready,
+ delta_tx->agg.frame_not_ready,
+ max_tx->agg.frame_not_ready);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg underrun:",
+ le32_to_cpu(tx->agg.underrun),
+ accum_tx->agg.underrun,
+ delta_tx->agg.underrun, max_tx->agg.underrun);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg bt_prio_kill:",
+ le32_to_cpu(tx->agg.bt_prio_kill),
+ accum_tx->agg.bt_prio_kill,
+ delta_tx->agg.bt_prio_kill,
+ max_tx->agg.bt_prio_kill);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "agg rx_ba_rsp_cnt:",
+ le32_to_cpu(tx->agg.rx_ba_rsp_cnt),
+ accum_tx->agg.rx_ba_rsp_cnt,
+ delta_tx->agg.rx_ba_rsp_cnt,
+ max_tx->agg.rx_ba_rsp_cnt);
+
+ if (tx->tx_power.ant_a || tx->tx_power.ant_b || tx->tx_power.ant_c) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "tx power: (1/2 dB step)\n");
+ if ((priv->cfg->valid_tx_ant & ANT_A) && tx->tx_power.ant_a)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_hex, "antenna A:",
+ tx->tx_power.ant_a);
+ if ((priv->cfg->valid_tx_ant & ANT_B) && tx->tx_power.ant_b)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_hex, "antenna B:",
+ tx->tx_power.ant_b);
+ if ((priv->cfg->valid_tx_ant & ANT_C) && tx->tx_power.ant_c)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_hex, "antenna C:",
+ tx->tx_power.ant_c);
+ }
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
}
static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
@@ -1062,8 +1693,347 @@
size_t count, loff_t *ppos)
{
struct iwl_priv *priv = file->private_data;
- return priv->cfg->ops->lib->debugfs_ops.general_stats_read(file,
- user_buf, count, ppos);
+ int pos = 0;
+ char *buf;
+ int bufsz = sizeof(struct statistics_general) * 10 + 300;
+ ssize_t ret;
+ struct statistics_general_common *general, *accum_general;
+ struct statistics_general_common *delta_general, *max_general;
+ struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
+ struct statistics_div *div, *accum_div, *delta_div, *max_div;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /* the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ general = &priv->statistics.common;
+ dbg = &priv->statistics.common.dbg;
+ div = &priv->statistics.common.div;
+ accum_general = &priv->accum_stats.common;
+ accum_dbg = &priv->accum_stats.common.dbg;
+ accum_div = &priv->accum_stats.common.div;
+ delta_general = &priv->delta_stats.common;
+ max_general = &priv->max_delta_stats.common;
+ delta_dbg = &priv->delta_stats.common.dbg;
+ max_dbg = &priv->max_delta_stats.common.dbg;
+ delta_div = &priv->delta_stats.common.div;
+ max_div = &priv->max_delta_stats.common.div;
+
+ pos += iwl_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_header, "Statistics_General:");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_value, "temperature:",
+ le32_to_cpu(general->temperature));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_value, "temperature_m:",
+ le32_to_cpu(general->temperature_m));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_value, "ttl_timestamp:",
+ le32_to_cpu(general->ttl_timestamp));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "burst_check:",
+ le32_to_cpu(dbg->burst_check),
+ accum_dbg->burst_check,
+ delta_dbg->burst_check, max_dbg->burst_check);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "burst_count:",
+ le32_to_cpu(dbg->burst_count),
+ accum_dbg->burst_count,
+ delta_dbg->burst_count, max_dbg->burst_count);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "wait_for_silence_timeout_count:",
+ le32_to_cpu(dbg->wait_for_silence_timeout_cnt),
+ accum_dbg->wait_for_silence_timeout_cnt,
+ delta_dbg->wait_for_silence_timeout_cnt,
+ max_dbg->wait_for_silence_timeout_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "sleep_time:",
+ le32_to_cpu(general->sleep_time),
+ accum_general->sleep_time,
+ delta_general->sleep_time, max_general->sleep_time);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "slots_out:",
+ le32_to_cpu(general->slots_out),
+ accum_general->slots_out,
+ delta_general->slots_out, max_general->slots_out);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "slots_idle:",
+ le32_to_cpu(general->slots_idle),
+ accum_general->slots_idle,
+ delta_general->slots_idle, max_general->slots_idle);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "tx_on_a:",
+ le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
+ delta_div->tx_on_a, max_div->tx_on_a);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "tx_on_b:",
+ le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
+ delta_div->tx_on_b, max_div->tx_on_b);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "exec_time:",
+ le32_to_cpu(div->exec_time), accum_div->exec_time,
+ delta_div->exec_time, max_div->exec_time);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "probe_time:",
+ le32_to_cpu(div->probe_time), accum_div->probe_time,
+ delta_div->probe_time, max_div->probe_time);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "rx_enable_counter:",
+ le32_to_cpu(general->rx_enable_counter),
+ accum_general->rx_enable_counter,
+ delta_general->rx_enable_counter,
+ max_general->rx_enable_counter);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ fmt_table, "num_of_sos_states:",
+ le32_to_cpu(general->num_of_sos_states),
+ accum_general->num_of_sos_states,
+ delta_general->num_of_sos_states,
+ max_general->num_of_sos_states);
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_bt_stats_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ char *buf;
+ int bufsz = (sizeof(struct statistics_bt_activity) * 24) + 200;
+ ssize_t ret;
+ struct statistics_bt_activity *bt, *accum_bt;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ if (!priv->bt_enable_flag)
+ return -EINVAL;
+
+ /* make request to uCode to retrieve statistics information */
+ mutex_lock(&priv->mutex);
+ ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
+ mutex_unlock(&priv->mutex);
+
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending statistics request: %zd\n", ret);
+ return -EAGAIN;
+ }
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ bt = &priv->statistics.bt_activity;
+ accum_bt = &priv->accum_stats.bt_activity;
+
+ pos += iwl_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_BT:\n");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\t\t\tcurrent\t\t\taccumulative\n");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "hi_priority_tx_req_cnt:\t\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->hi_priority_tx_req_cnt),
+ accum_bt->hi_priority_tx_req_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "hi_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->hi_priority_tx_denied_cnt),
+ accum_bt->hi_priority_tx_denied_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "lo_priority_tx_req_cnt:\t\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->lo_priority_tx_req_cnt),
+ accum_bt->lo_priority_tx_req_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->lo_priority_tx_denied_cnt),
+ accum_bt->lo_priority_tx_denied_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "hi_priority_rx_req_cnt:\t\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->hi_priority_rx_req_cnt),
+ accum_bt->hi_priority_rx_req_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "hi_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->hi_priority_rx_denied_cnt),
+ accum_bt->hi_priority_rx_denied_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "lo_priority_rx_req_cnt:\t\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->lo_priority_rx_req_cnt),
+ accum_bt->lo_priority_rx_req_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
+ le32_to_cpu(bt->lo_priority_rx_denied_cnt),
+ accum_bt->lo_priority_rx_denied_cnt);
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "(rx)num_bt_kills:\t\t%u\t\t\t%u\n",
+ le32_to_cpu(priv->statistics.num_bt_kills),
+ priv->statistics.accum_num_bt_kills);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_reply_tx_error_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ char *buf;
+ int bufsz = (sizeof(struct reply_tx_error_statistics) * 24) +
+ (sizeof(struct reply_agg_tx_error_statistics) * 24) + 200;
+ ssize_t ret;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_TX_Error:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_DELAY),
+ priv->_agn.reply_tx_stats.pp_delay);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_FEW_BYTES),
+ priv->_agn.reply_tx_stats.pp_few_bytes);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_BT_PRIO),
+ priv->_agn.reply_tx_stats.pp_bt_prio);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_QUIET_PERIOD),
+ priv->_agn.reply_tx_stats.pp_quiet_period);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_CALC_TTAK),
+ priv->_agn.reply_tx_stats.pp_calc_ttak);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_tx_fail_reason(
+ TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY),
+ priv->_agn.reply_tx_stats.int_crossed_retry);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_SHORT_LIMIT),
+ priv->_agn.reply_tx_stats.short_limit);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_LONG_LIMIT),
+ priv->_agn.reply_tx_stats.long_limit);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_UNDERRUN),
+ priv->_agn.reply_tx_stats.fifo_underrun);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_DRAIN_FLOW),
+ priv->_agn.reply_tx_stats.drain_flow);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_RFKILL_FLUSH),
+ priv->_agn.reply_tx_stats.rfkill_flush);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_LIFE_EXPIRE),
+ priv->_agn.reply_tx_stats.life_expire);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_DEST_PS),
+ priv->_agn.reply_tx_stats.dest_ps);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_HOST_ABORTED),
+ priv->_agn.reply_tx_stats.host_abort);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_BT_RETRY),
+ priv->_agn.reply_tx_stats.pp_delay);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_STA_INVALID),
+ priv->_agn.reply_tx_stats.sta_invalid);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_FRAG_DROPPED),
+ priv->_agn.reply_tx_stats.frag_drop);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_TID_DISABLE),
+ priv->_agn.reply_tx_stats.tid_disable);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_FLUSHED),
+ priv->_agn.reply_tx_stats.fifo_flush);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_tx_fail_reason(
+ TX_STATUS_FAIL_INSUFFICIENT_CF_POLL),
+ priv->_agn.reply_tx_stats.insuff_cf_poll);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_tx_fail_reason(TX_STATUS_FAIL_PASSIVE_NO_RX),
+ priv->_agn.reply_tx_stats.fail_hw_drop);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_tx_fail_reason(
+ TX_STATUS_FAIL_NO_BEACON_ON_RADAR),
+ priv->_agn.reply_tx_stats.sta_color_mismatch);
+ pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n",
+ priv->_agn.reply_tx_stats.unknown);
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\nStatistics_Agg_TX_Error:\n");
+
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_UNDERRUN_MSK),
+ priv->_agn.reply_agg_tx_stats.underrun);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_BT_PRIO_MSK),
+ priv->_agn.reply_agg_tx_stats.bt_prio);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_FEW_BYTES_MSK),
+ priv->_agn.reply_agg_tx_stats.few_bytes);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_ABORT_MSK),
+ priv->_agn.reply_agg_tx_stats.abort);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(
+ AGG_TX_STATE_LAST_SENT_TTL_MSK),
+ priv->_agn.reply_agg_tx_stats.last_sent_ttl);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(
+ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK),
+ priv->_agn.reply_agg_tx_stats.last_sent_try);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(
+ AGG_TX_STATE_LAST_SENT_BT_KILL_MSK),
+ priv->_agn.reply_agg_tx_stats.last_sent_bt_kill);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_SCD_QUERY_MSK),
+ priv->_agn.reply_agg_tx_stats.scd_query);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(
+ AGG_TX_STATE_TEST_BAD_CRC32_MSK),
+ priv->_agn.reply_agg_tx_stats.bad_crc32);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_RESPONSE_MSK),
+ priv->_agn.reply_agg_tx_stats.response);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DUMP_TX_MSK),
+ priv->_agn.reply_agg_tx_stats.dump_tx);
+ pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+ iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DELAY_TX_MSK),
+ priv->_agn.reply_agg_tx_stats.delay_tx);
+ pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n",
+ priv->_agn.reply_agg_tx_stats.unknown);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
}
static ssize_t iwl_dbgfs_sensitivity_read(struct file *file,
@@ -1268,8 +2238,7 @@
if (sscanf(buf, "%d", &csr) != 1)
return -EFAULT;
- if (priv->cfg->ops->lib->dump_csr)
- priv->cfg->ops->lib->dump_csr(priv);
+ iwl_dump_csr(priv);
return count;
}
@@ -1359,13 +2328,11 @@
int pos = 0;
ssize_t ret = -EFAULT;
- if (priv->cfg->ops->lib->dump_fh) {
- ret = pos = priv->cfg->ops->lib->dump_fh(priv, &buf, true);
- if (buf) {
- ret = simple_read_from_buffer(user_buf,
- count, ppos, buf, pos);
- kfree(buf);
- }
+ ret = pos = iwl_dump_fh(priv, &buf, true);
+ if (buf) {
+ ret = simple_read_from_buffer(user_buf,
+ count, ppos, buf, pos);
+ kfree(buf);
}
return ret;
@@ -1531,16 +2498,6 @@
return count;
}
-static ssize_t iwl_dbgfs_ucode_bt_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
-
- return priv->cfg->ops->lib->debugfs_ops.bt_stats_read(file,
- user_buf, count, ppos);
-}
-
static ssize_t iwl_dbgfs_wd_timeout_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos) {
@@ -1572,12 +2529,10 @@
int pos = 0;
char buf[200];
const size_t bufsz = sizeof(buf);
- ssize_t ret;
if (!priv->bt_enable_flag) {
pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n");
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- return ret;
+ return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
}
pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n",
priv->bt_enable_flag);
@@ -1608,8 +2563,7 @@
break;
}
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- return ret;
+ return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
}
static ssize_t iwl_dbgfs_protection_mode_read(struct file *file,
@@ -1658,18 +2612,6 @@
return count;
}
-static ssize_t iwl_dbgfs_reply_tx_error_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
-
- if (priv->cfg->ops->lib->debugfs_ops.reply_tx_error)
- return priv->cfg->ops->lib->debugfs_ops.reply_tx_error(
- file, user_buf, count, ppos);
- else
- return -ENODATA;
-}
DEBUGFS_READ_FILE_OPS(rx_statistics);
DEBUGFS_READ_FILE_OPS(tx_statistics);
DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -1731,11 +2673,8 @@
DEBUGFS_ADD_FILE(status, dir_data, S_IRUSR);
DEBUGFS_ADD_FILE(interrupt, dir_data, S_IWUSR | S_IRUSR);
DEBUGFS_ADD_FILE(qos, dir_data, S_IRUSR);
- if (!priv->cfg->base_params->broken_powersave) {
- DEBUGFS_ADD_FILE(sleep_level_override, dir_data,
- S_IWUSR | S_IRUSR);
- DEBUGFS_ADD_FILE(current_sleep_command, dir_data, S_IRUSR);
- }
+ DEBUGFS_ADD_FILE(sleep_level_override, dir_data, S_IWUSR | S_IRUSR);
+ DEBUGFS_ADD_FILE(current_sleep_command, dir_data, S_IRUSR);
DEBUGFS_ADD_FILE(thermal_throttling, dir_data, S_IRUSR);
DEBUGFS_ADD_FILE(disable_ht40, dir_data, S_IWUSR | S_IRUSR);
DEBUGFS_ADD_FILE(rx_statistics, dir_debug, S_IRUSR);
@@ -1758,29 +2697,20 @@
DEBUGFS_ADD_FILE(txfifo_flush, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(protection_mode, dir_debug, S_IWUSR | S_IRUSR);
- if (priv->cfg->base_params->sensitivity_calib_by_driver)
- DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR);
- if (priv->cfg->base_params->chain_noise_calib_by_driver)
- DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR);
- if (priv->cfg->base_params->ucode_tracing)
- DEBUGFS_ADD_FILE(ucode_tracing, dir_debug, S_IWUSR | S_IRUSR);
- if (iwl_bt_statistics(priv))
- DEBUGFS_ADD_FILE(ucode_bt_stats, dir_debug, S_IRUSR);
+ DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR);
+ DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR);
+ DEBUGFS_ADD_FILE(ucode_tracing, dir_debug, S_IWUSR | S_IRUSR);
+ DEBUGFS_ADD_FILE(ucode_bt_stats, dir_debug, S_IRUSR);
DEBUGFS_ADD_FILE(reply_tx_error, dir_debug, S_IRUSR);
DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(wd_timeout, dir_debug, S_IWUSR);
if (iwl_advanced_bt_coexist(priv))
DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
- if (priv->cfg->base_params->sensitivity_calib_by_driver)
- DEBUGFS_ADD_BOOL(disable_sensitivity, dir_rf,
- &priv->disable_sens_cal);
- if (priv->cfg->base_params->chain_noise_calib_by_driver)
- DEBUGFS_ADD_BOOL(disable_chain_noise, dir_rf,
- &priv->disable_chain_noise_cal);
- if (priv->cfg->base_params->tx_power_by_driver)
- DEBUGFS_ADD_BOOL(disable_tx_power, dir_rf,
- &priv->disable_tx_power_cal);
+ DEBUGFS_ADD_BOOL(disable_sensitivity, dir_rf,
+ &priv->disable_sens_cal);
+ DEBUGFS_ADD_BOOL(disable_chain_noise, dir_rf,
+ &priv->disable_chain_noise_cal);
return 0;
err:
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 68b953f..214e465 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -26,7 +26,6 @@
/*
* Please use this file (iwl-dev.h) for driver implementation definitions.
* Please use iwl-commands.h for uCode API definitions.
- * Please use iwl-4965-hw.h for hardware-related definitions.
*/
#ifndef __iwl_dev_h__
@@ -179,53 +178,12 @@
#define IWL_NUM_SCAN_RATES (2)
-struct iwl4965_channel_tgd_info {
- u8 type;
- s8 max_power;
-};
-
-struct iwl4965_channel_tgh_info {
- s64 last_radar_time;
-};
-
-#define IWL4965_MAX_RATE (33)
-
-struct iwl3945_clip_group {
- /* maximum power level to prevent clipping for each rate, derived by
- * us from this band's saturation power in EEPROM */
- const s8 clip_powers[IWL_MAX_RATES];
-};
-
-/* current Tx power values to use, one for each rate for each channel.
- * requested power is limited by:
- * -- regulatory EEPROM limits for this channel
- * -- hardware capabilities (clip-powers)
- * -- spectrum management
- * -- user preference (e.g. iwconfig)
- * when requested power is set, base power index must also be set. */
-struct iwl3945_channel_power_info {
- struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_index; /* actual (compenst'd) index into gain table */
- s8 base_power_index; /* gain index for power at factory temp. */
- s8 requested_power; /* power (dBm) requested for this chnl/rate */
-};
-
-/* current scan Tx power values to use, one for each scan rate for each
- * channel. */
-struct iwl3945_scan_power_info {
- struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_index; /* actual (compenst'd) index into gain table */
- s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
-};
-
/*
* One for each channel, holds all channel setup data
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
* with one another!
*/
struct iwl_channel_info {
- struct iwl4965_channel_tgd_info tgd;
- struct iwl4965_channel_tgh_info tgh;
struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
* HT40 channel */
@@ -245,14 +203,6 @@
s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
u8 ht40_flags; /* flags copied from EEPROM */
u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
-
- /* Radio/DSP gain settings for each "normal" data Tx rate.
- * These include, in addition to RF and DSP gain, a few fields for
- * remembering/modifying gain settings (indexes). */
- struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
-
- /* Radio/DSP gain settings for each scan rate, for directed scans. */
- struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
};
#define IWL_TX_FIFO_BK 0 /* shared */
@@ -288,15 +238,6 @@
#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-struct iwl_frame {
- union {
- struct ieee80211_hdr frame;
- struct iwl_tx_beacon_cmd beacon;
- u8 raw[IEEE80211_FRAME_LEN];
- u8 cmd[360];
- } u;
- struct list_head list;
-};
#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
@@ -309,6 +250,7 @@
CMD_SIZE_HUGE = (1 << 0),
CMD_ASYNC = (1 << 1),
CMD_WANT_SKB = (1 << 2),
+ CMD_MAPPED = (1 << 3),
};
#define DEF_CMD_PAYLOAD_SIZE 320
@@ -416,6 +358,7 @@
#define IWL_EMPTYING_HW_QUEUE_ADDBA 2
#define IWL_EMPTYING_HW_QUEUE_DELBA 3
u8 state;
+ u8 tx_fifo;
};
@@ -499,9 +442,6 @@
* When mac80211 creates a station it reserves some space (hw->sta_data_size)
* in the structure for use by driver. This structure is places in that
* space.
- *
- * The common struct MUST be first because it is shared between
- * 3945 and agn!
*/
struct iwl_station_priv {
struct iwl_station_priv_common common;
@@ -530,6 +470,10 @@
u32 len; /* bytes */
};
+struct fw_img {
+ struct fw_desc code, data;
+};
+
/* v1/v2 uCode file layout */
struct iwl_ucode_header {
__le32 ver; /* major/minor/API/serial */
@@ -586,6 +530,22 @@
IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
+ /* 16 and 17 reserved for future use */
+ IWL_UCODE_TLV_FLAGS = 18,
+};
+
+/**
+ * enum iwl_ucode_tlv_flag - ucode API flags
+ * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
+ * was a separate TLV but moved here to save space.
+ * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
+ * treats good CRC threshold as a boolean
+ * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
+ */
+enum iwl_ucode_tlv_flag {
+ IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
+ IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
+ IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
};
struct iwl_ucode_tlv {
@@ -619,14 +579,6 @@
u8 data[0];
};
-struct iwl4965_ibss_seq {
- u8 mac[ETH_ALEN];
- u16 seq_num;
- u16 frag_num;
- unsigned long packet_time;
- struct list_head list;
-};
-
struct iwl_sensitivity_ranges {
u16 min_nrg_cck;
u16 max_nrg_cck;
@@ -700,7 +652,6 @@
u8 max_beacon_itrvl; /* in 1024 ms */
u32 max_inst_size;
u32 max_data_size;
- u32 max_bsm_size;
u32 ct_kill_threshold; /* value in hw-dependent units */
u32 ct_kill_exit_threshold; /* value in hw-dependent units */
/* for 1000, 6000 series and up */
@@ -722,8 +673,6 @@
* Naming convention --
* iwl_ <-- Is part of iwlwifi
* iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
- * iwl4965_bg_ <-- Called from work queue context
- * iwl4965_mac_ <-- mac80211 callback
*
****************************************************************************/
extern void iwl_update_chain_flags(struct iwl_priv *priv);
@@ -772,7 +721,6 @@
/* Sensitivity and chain noise calibration */
#define INITIALIZATION_VALUE 0xFFFF
-#define IWL4965_CAL_NUM_BEACONS 20
#define IWL_CAL_NUM_BEACONS 16
#define MAXIMUM_ALLOWED_PATHLOSS 15
@@ -806,24 +754,19 @@
#define NRG_NUM_PREV_STAT_L 20
#define NUM_RX_CHAINS 3
-enum iwl4965_false_alarm_state {
+enum iwlagn_false_alarm_state {
IWL_FA_TOO_MANY = 0,
IWL_FA_TOO_FEW = 1,
IWL_FA_GOOD_RANGE = 2,
};
-enum iwl4965_chain_noise_state {
+enum iwlagn_chain_noise_state {
IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
IWL_CHAIN_NOISE_ACCUMULATE,
IWL_CHAIN_NOISE_CALIBRATED,
IWL_CHAIN_NOISE_DONE,
};
-enum iwl4965_calib_enabled_state {
- IWL_CALIB_DISABLED = 0, /* must be 0 */
- IWL_CALIB_ENABLED = 1,
-};
-
/*
* enum iwl_calib
@@ -847,12 +790,6 @@
size_t buf_len;
};
-enum ucode_type {
- UCODE_NONE = 0,
- UCODE_INIT,
- UCODE_RT
-};
-
/* Sensitivity calib data */
struct iwl_sensitivity_data {
u32 auto_corr_ofdm;
@@ -1131,12 +1068,6 @@
/* extend beacon time format bit shifting */
/*
- * for _3945 devices
- * bits 31:24 - extended
- * bits 23:0 - interval
- */
-#define IWL3945_EXT_BEACON_TIME_POS 24
-/*
* for _agn devices
* bits 31:22 - extended
* bits 21:0 - interval
@@ -1164,10 +1095,12 @@
struct iwl_notification_wait {
struct list_head list;
- void (*fn)(struct iwl_priv *priv, struct iwl_rx_packet *pkt);
+ void (*fn)(struct iwl_priv *priv, struct iwl_rx_packet *pkt,
+ void *data);
+ void *fn_data;
u8 cmd;
- bool triggered;
+ bool triggered, aborted;
};
enum iwl_rxon_context_id {
@@ -1228,6 +1161,8 @@
bool enabled, is_40mhz;
u8 extension_chan_offset;
} ht;
+
+ bool last_tx_rejected;
};
enum iwl_scan_type {
@@ -1244,13 +1179,10 @@
struct ieee80211_rate *ieee_rates;
struct iwl_cfg *cfg;
- /* temporary frame storage list */
- struct list_head free_frames;
- int frames_count;
-
enum ieee80211_band band;
- int alloc_rxb_page;
+ void (*pre_rx_handler)(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb);
void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb);
@@ -1305,16 +1237,12 @@
spinlock_t hcmd_lock; /* protect hcmd */
spinlock_t reg_lock; /* protect hw register access */
struct mutex mutex;
- struct mutex sync_cmd_mutex; /* enable serialization of sync commands */
/* basic pci-network driver stuff */
struct pci_dev *pci_dev;
/* pci hardware address support */
void __iomem *hw_base;
- u32 hw_rev;
- u32 hw_wa_rev;
- u8 rev_id;
/* microcode/device supports multiple contexts */
u8 valid_contexts;
@@ -1325,6 +1253,8 @@
/* max number of station keys */
u8 sta_key_max_num;
+ bool new_scan_threshold_behaviour;
+
/* EEPROM MAC addresses */
struct mac_address addresses[2];
@@ -1332,13 +1262,10 @@
int fw_index; /* firmware we're trying to load */
u32 ucode_ver; /* version of ucode, copy of
iwl_ucode.ver */
- struct fw_desc ucode_code; /* runtime inst */
- struct fw_desc ucode_data; /* runtime data original */
- struct fw_desc ucode_data_backup; /* runtime data save/restore */
- struct fw_desc ucode_init; /* initialization inst */
- struct fw_desc ucode_init_data; /* initialization data */
- struct fw_desc ucode_boot; /* bootstrap inst */
- enum ucode_type ucode_type;
+ struct fw_img ucode_rt;
+ struct fw_img ucode_init;
+
+ enum iwlagn_ucode_subtype ucode_type;
u8 ucode_write_complete; /* the image write is complete */
char firmware_name[25];
@@ -1346,10 +1273,10 @@
struct iwl_switch_rxon switch_rxon;
- /* 1st responses from initialize and runtime uCode images.
- * _agn's initialize alive response contains some calibration data. */
- struct iwl_init_alive_resp card_alive_init;
- struct iwl_alive_resp card_alive;
+ struct {
+ u32 error_event_table;
+ u32 log_event_table;
+ } device_pointers;
u16 active_rate;
@@ -1390,15 +1317,12 @@
struct iwl_power_mgr power_data;
struct iwl_tt_mgmt thermal_throttle;
- /* context information */
- u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
-
/* station table variables */
/* Note: if lock and sta_lock are needed, lock must be acquired first */
spinlock_t sta_lock;
int num_stations;
- struct iwl_station_entry stations[IWL_STATION_COUNT];
+ struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
unsigned long ucode_key_table;
/* queue refcounts */
@@ -1422,101 +1346,81 @@
/* Last Rx'd beacon timestamp */
u64 timestamp;
- union {
-#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
- struct {
- void *shared_virt;
- dma_addr_t shared_phys;
-
- struct delayed_work thermal_periodic;
- struct delayed_work rfkill_poll;
-
- struct iwl3945_notif_statistics statistics;
+ struct {
+ __le32 flag;
+ struct statistics_general_common common;
+ struct statistics_rx_non_phy rx_non_phy;
+ struct statistics_rx_phy rx_ofdm;
+ struct statistics_rx_ht_phy rx_ofdm_ht;
+ struct statistics_rx_phy rx_cck;
+ struct statistics_tx tx;
#ifdef CONFIG_IWLWIFI_DEBUGFS
- struct iwl3945_notif_statistics accum_statistics;
- struct iwl3945_notif_statistics delta_statistics;
- struct iwl3945_notif_statistics max_delta;
+ struct statistics_bt_activity bt_activity;
+ __le32 num_bt_kills, accum_num_bt_kills;
#endif
-
- u32 sta_supp_rates;
- int last_rx_rssi; /* From Rx packet statistics */
-
- /* Rx'd packet timing information */
- u32 last_beacon_time;
- u64 last_tsf;
-
- /*
- * each calibration channel group in the
- * EEPROM has a derived clip setting for
- * each rate.
- */
- const struct iwl3945_clip_group clip_groups[5];
-
- } _3945;
-#endif
-#if defined(CONFIG_IWLAGN) || defined(CONFIG_IWLAGN_MODULE)
- struct {
- /* INT ICT Table */
- __le32 *ict_tbl;
- void *ict_tbl_vir;
- dma_addr_t ict_tbl_dma;
- dma_addr_t aligned_ict_tbl_dma;
- int ict_index;
- u32 inta;
- bool use_ict;
- /*
- * reporting the number of tids has AGG on. 0 means
- * no AGGREGATION
- */
- u8 agg_tids_count;
-
- struct iwl_rx_phy_res last_phy_res;
- bool last_phy_res_valid;
-
- struct completion firmware_loading_complete;
-
- u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
- u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
-
- /*
- * chain noise reset and gain commands are the
- * two extra calibration commands follows the standard
- * phy calibration commands
- */
- u8 phy_calib_chain_noise_reset_cmd;
- u8 phy_calib_chain_noise_gain_cmd;
-
- struct iwl_notif_statistics statistics;
- struct iwl_bt_notif_statistics statistics_bt;
- /* counts reply_tx error */
- struct reply_tx_error_statistics reply_tx_stats;
- struct reply_agg_tx_error_statistics reply_agg_tx_stats;
+ } statistics;
#ifdef CONFIG_IWLWIFI_DEBUGFS
- struct iwl_notif_statistics accum_statistics;
- struct iwl_notif_statistics delta_statistics;
- struct iwl_notif_statistics max_delta;
- struct iwl_bt_notif_statistics accum_statistics_bt;
- struct iwl_bt_notif_statistics delta_statistics_bt;
- struct iwl_bt_notif_statistics max_delta_bt;
+ struct {
+ struct statistics_general_common common;
+ struct statistics_rx_non_phy rx_non_phy;
+ struct statistics_rx_phy rx_ofdm;
+ struct statistics_rx_ht_phy rx_ofdm_ht;
+ struct statistics_rx_phy rx_cck;
+ struct statistics_tx tx;
+ struct statistics_bt_activity bt_activity;
+ } accum_stats, delta_stats, max_delta_stats;
#endif
- /* notification wait support */
- struct list_head notif_waits;
- spinlock_t notif_wait_lock;
- wait_queue_head_t notif_waitq;
+ struct {
+ /* INT ICT Table */
+ __le32 *ict_tbl;
+ void *ict_tbl_vir;
+ dma_addr_t ict_tbl_dma;
+ dma_addr_t aligned_ict_tbl_dma;
+ int ict_index;
+ u32 inta;
+ bool use_ict;
+ /*
+ * reporting the number of tids has AGG on. 0 means
+ * no AGGREGATION
+ */
+ u8 agg_tids_count;
- /* remain-on-channel offload support */
- struct ieee80211_channel *hw_roc_channel;
- struct delayed_work hw_roc_work;
- enum nl80211_channel_type hw_roc_chantype;
- int hw_roc_duration;
+ struct iwl_rx_phy_res last_phy_res;
+ bool last_phy_res_valid;
- struct sk_buff *offchan_tx_skb;
- int offchan_tx_timeout;
- struct ieee80211_channel *offchan_tx_chan;
- } _agn;
-#endif
- };
+ struct completion firmware_loading_complete;
+
+ u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
+ u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
+
+ /*
+ * chain noise reset and gain commands are the
+ * two extra calibration commands follows the standard
+ * phy calibration commands
+ */
+ u8 phy_calib_chain_noise_reset_cmd;
+ u8 phy_calib_chain_noise_gain_cmd;
+
+ /* counts reply_tx error */
+ struct reply_tx_error_statistics reply_tx_stats;
+ struct reply_agg_tx_error_statistics reply_agg_tx_stats;
+ /* notification wait support */
+ struct list_head notif_waits;
+ spinlock_t notif_wait_lock;
+ wait_queue_head_t notif_waitq;
+
+ /* remain-on-channel offload support */
+ struct ieee80211_channel *hw_roc_channel;
+ struct delayed_work hw_roc_work;
+ enum nl80211_channel_type hw_roc_chantype;
+ int hw_roc_duration;
+ bool hw_roc_setup;
+
+ struct sk_buff *offchan_tx_skb;
+ int offchan_tx_timeout;
+ struct ieee80211_channel *offchan_tx_chan;
+ } _agn;
/* bt coex */
u8 bt_enable_flag;
@@ -1559,8 +1463,6 @@
struct tasklet_struct irq_tasklet;
- struct delayed_work init_alive_start;
- struct delayed_work alive_start;
struct delayed_work scan_check;
/* TX Power */
@@ -1589,12 +1491,10 @@
struct work_struct txpower_work;
u32 disable_sens_cal;
u32 disable_chain_noise_cal;
- u32 disable_tx_power_cal;
struct work_struct run_time_calib_work;
struct timer_list statistics_periodic;
struct timer_list ucode_trace;
struct timer_list watchdog;
- bool hw_ready;
struct iwl_event_log event_log;
@@ -1658,21 +1558,24 @@
ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \
if (priv->valid_contexts & BIT(ctx->ctxid))
+static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
+{
+ return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
static inline int iwl_is_associated(struct iwl_priv *priv,
enum iwl_rxon_context_id ctxid)
{
- return (priv->contexts[ctxid].active.filter_flags &
- RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+ return iwl_is_associated_ctx(&priv->contexts[ctxid]);
}
static inline int iwl_is_any_associated(struct iwl_priv *priv)
{
- return iwl_is_associated(priv, IWL_RXON_CTX_BSS);
-}
-
-static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
-{
- return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+ struct iwl_rxon_context *ctx;
+ for_each_context(priv, ctx)
+ if (iwl_is_associated_ctx(ctx))
+ return true;
+ return false;
}
static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
@@ -1710,12 +1613,10 @@
static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page)
{
__free_pages(page, priv->hw_params.rx_page_order);
- priv->alloc_rxb_page--;
}
static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page)
{
free_pages(page, priv->hw_params.rx_page_order);
- priv->alloc_rxb_page--;
}
#endif /* __iwl_dev_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
index 4a48763..a635a7e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2009 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index 4cf864c..f00172c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2009 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 833194a..c839796 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -142,6 +142,45 @@
*
******************************************************************************/
+/*
+ * The device's EEPROM semaphore prevents conflicts between driver and uCode
+ * when accessing the EEPROM; each access is a series of pulses to/from the
+ * EEPROM chip, not a single event, so even reads could conflict if they
+ * weren't arbitrated by the semaphore.
+ */
+static int iwl_eeprom_acquire_semaphore(struct iwl_priv *priv)
+{
+ u16 count;
+ int ret;
+
+ for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
+ /* Request semaphore */
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
+
+ /* See if we got it */
+ ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
+ EEPROM_SEM_TIMEOUT);
+ if (ret >= 0) {
+ IWL_DEBUG_EEPROM(priv,
+ "Acquired semaphore after %d tries.\n",
+ count+1);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void iwl_eeprom_release_semaphore(struct iwl_priv *priv)
+{
+ iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
+
+}
+
static int iwl_eeprom_verify_signature(struct iwl_priv *priv)
{
u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
@@ -188,18 +227,16 @@
CSR_OTP_GP_REG_OTP_ACCESS_MODE);
}
-static int iwlcore_get_nvm_type(struct iwl_priv *priv)
+static int iwlcore_get_nvm_type(struct iwl_priv *priv, u32 hw_rev)
{
u32 otpgp;
int nvm_type;
/* OTP only valid for CP/PP and after */
- switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ switch (hw_rev & CSR_HW_REV_TYPE_MSK) {
case CSR_HW_REV_TYPE_NONE:
IWL_ERR(priv, "Unknown hardware type\n");
return -ENOENT;
- case CSR_HW_REV_TYPE_3945:
- case CSR_HW_REV_TYPE_4965:
case CSR_HW_REV_TYPE_5300:
case CSR_HW_REV_TYPE_5350:
case CSR_HW_REV_TYPE_5100:
@@ -217,26 +254,20 @@
return nvm_type;
}
-const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
-{
- BUG_ON(offset >= priv->cfg->base_params->eeprom_size);
- return &priv->eeprom[offset];
-}
-
static int iwl_init_otp_access(struct iwl_priv *priv)
{
int ret;
/* Enable 40MHz radio clock */
- _iwl_write32(priv, CSR_GP_CNTRL,
- _iwl_read32(priv, CSR_GP_CNTRL) |
- CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ iwl_write32(priv, CSR_GP_CNTRL,
+ iwl_read32(priv, CSR_GP_CNTRL) |
+ CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
/* wait for clock to be ready */
ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- 25000);
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ 25000);
if (ret < 0)
IWL_ERR(priv, "Time out access OTP\n");
else {
@@ -263,17 +294,17 @@
u32 r;
u32 otpgp;
- _iwl_write32(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+ iwl_write32(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
if (ret < 0) {
IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
return ret;
}
- r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+ r = iwl_read32(priv, CSR_EEPROM_REG);
/* check for ECC errors: */
otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
@@ -396,7 +427,7 @@
*
* NOTE: This routine uses the non-debug IO access functions.
*/
-int iwl_eeprom_init(struct iwl_priv *priv)
+int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev)
{
__le16 *e;
u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
@@ -406,7 +437,7 @@
u16 validblockaddr = 0;
u16 cache_addr = 0;
- priv->nvm_device_type = iwlcore_get_nvm_type(priv);
+ priv->nvm_device_type = iwlcore_get_nvm_type(priv, hw_rev);
if (priv->nvm_device_type == -ENOENT)
return -ENOENT;
/* allocate eeprom */
@@ -429,7 +460,7 @@
}
/* Make sure driver (instead of uCode) is allowed to read EEPROM */
- ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv);
+ ret = iwl_eeprom_acquire_semaphore(priv);
if (ret < 0) {
IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n");
ret = -ENOENT;
@@ -444,9 +475,9 @@
ret = -ENOENT;
goto done;
}
- _iwl_write32(priv, CSR_EEPROM_GP,
- iwl_read32(priv, CSR_EEPROM_GP) &
- ~CSR_EEPROM_GP_IF_OWNER_MSK);
+ iwl_write32(priv, CSR_EEPROM_GP,
+ iwl_read32(priv, CSR_EEPROM_GP) &
+ ~CSR_EEPROM_GP_IF_OWNER_MSK);
iwl_set_bit(priv, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
@@ -473,8 +504,8 @@
for (addr = 0; addr < sz; addr += sizeof(u16)) {
u32 r;
- _iwl_write32(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+ iwl_write32(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
CSR_EEPROM_REG_READ_VALID_MSK,
@@ -484,7 +515,7 @@
IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
goto done;
}
- r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+ r = iwl_read32(priv, CSR_EEPROM_REG);
e[addr / 2] = cpu_to_le16(r >> 16);
}
}
@@ -496,7 +527,7 @@
ret = 0;
done:
- priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv);
+ iwl_eeprom_release_semaphore(priv);
err:
if (ret)
@@ -719,13 +750,6 @@
flags & EEPROM_CHANNEL_RADAR))
? "" : "not ");
- /* Set the tx_power_user_lmt to the highest power
- * supported by any channel */
- if (eeprom_ch_info[ch].max_power_avg >
- priv->tx_power_user_lmt)
- priv->tx_power_user_lmt =
- eeprom_ch_info[ch].max_power_avg;
-
ch_info++;
}
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 20b6646..c960c6f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -110,10 +110,6 @@
};
/* SKU Capabilities */
-/* 3945 only */
-#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
-#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
-
/* 5000 and up */
#define EEPROM_SKU_CAP_BAND_POS (4)
#define EEPROM_SKU_CAP_BAND_SELECTION \
@@ -168,28 +164,6 @@
s8 mimo3_max;
} __packed;
-/* 3945 Specific */
-#define EEPROM_3945_EEPROM_VERSION (0x2f)
-
-/* 4965 has two radio transmitters (and 3 radio receivers) */
-#define EEPROM_TX_POWER_TX_CHAINS (2)
-
-/* 4965 has room for up to 8 sets of txpower calibration data */
-#define EEPROM_TX_POWER_BANDS (8)
-
-/* 4965 factory calibration measures txpower gain settings for
- * each of 3 target output levels */
-#define EEPROM_TX_POWER_MEASUREMENTS (3)
-
-/* 4965 Specific */
-/* 4965 driver does not work with txpower calibration version < 5 */
-#define EEPROM_4965_TX_POWER_VERSION (5)
-#define EEPROM_4965_EEPROM_VERSION (0x2f)
-#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */
-#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */
-#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */
-#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */
-
/* 5000 Specific */
#define EEPROM_5000_TX_POWER_VERSION (4)
#define EEPROM_5000_EEPROM_VERSION (0x11A)
@@ -282,90 +256,6 @@
/* 2.4 GHz */
extern const u8 iwl_eeprom_band_1[14];
-/*
- * factory calibration data for one txpower level, on one channel,
- * measured on one of the 2 tx chains (radio transmitter and associated
- * antenna). EEPROM contains:
- *
- * 1) Temperature (degrees Celsius) of device when measurement was made.
- *
- * 2) Gain table index used to achieve the target measurement power.
- * This refers to the "well-known" gain tables (see iwl-4965-hw.h).
- *
- * 3) Actual measured output power, in half-dBm ("34" = 17 dBm).
- *
- * 4) RF power amplifier detector level measurement (not used).
- */
-struct iwl_eeprom_calib_measure {
- u8 temperature; /* Device temperature (Celsius) */
- u8 gain_idx; /* Index into gain table */
- u8 actual_pow; /* Measured RF output power, half-dBm */
- s8 pa_det; /* Power amp detector level (not used) */
-} __packed;
-
-
-/*
- * measurement set for one channel. EEPROM contains:
- *
- * 1) Channel number measured
- *
- * 2) Measurements for each of 3 power levels for each of 2 radio transmitters
- * (a.k.a. "tx chains") (6 measurements altogether)
- */
-struct iwl_eeprom_calib_ch_info {
- u8 ch_num;
- struct iwl_eeprom_calib_measure
- measurements[EEPROM_TX_POWER_TX_CHAINS]
- [EEPROM_TX_POWER_MEASUREMENTS];
-} __packed;
-
-/*
- * txpower subband info.
- *
- * For each frequency subband, EEPROM contains the following:
- *
- * 1) First and last channels within range of the subband. "0" values
- * indicate that this sample set is not being used.
- *
- * 2) Sample measurement sets for 2 channels close to the range endpoints.
- */
-struct iwl_eeprom_calib_subband_info {
- u8 ch_from; /* channel number of lowest channel in subband */
- u8 ch_to; /* channel number of highest channel in subband */
- struct iwl_eeprom_calib_ch_info ch1;
- struct iwl_eeprom_calib_ch_info ch2;
-} __packed;
-
-
-/*
- * txpower calibration info. EEPROM contains:
- *
- * 1) Factory-measured saturation power levels (maximum levels at which
- * tx power amplifier can output a signal without too much distortion).
- * There is one level for 2.4 GHz band and one for 5 GHz band. These
- * values apply to all channels within each of the bands.
- *
- * 2) Factory-measured power supply voltage level. This is assumed to be
- * constant (i.e. same value applies to all channels/bands) while the
- * factory measurements are being made.
- *
- * 3) Up to 8 sets of factory-measured txpower calibration values.
- * These are for different frequency ranges, since txpower gain
- * characteristics of the analog radio circuitry vary with frequency.
- *
- * Not all sets need to be filled with data;
- * struct iwl_eeprom_calib_subband_info contains range of channels
- * (0 if unused) for each set of data.
- */
-struct iwl_eeprom_calib_info {
- u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
- u8 saturation_power52; /* half-dBm */
- __le16 voltage; /* signed */
- struct iwl_eeprom_calib_subband_info
- band_info[EEPROM_TX_POWER_BANDS];
-} __packed;
-
-
#define ADDRESS_MSK 0x0000FFFF
#define INDIRECT_TYPE_MSK 0x000F0000
#define INDIRECT_HOST 0x00010000
@@ -398,103 +288,24 @@
#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
-#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0
-#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1
-
-/* Radio Config for 5000 and up */
-#define EEPROM_RF_CONFIG_TYPE_R3x3 0x0
-#define EEPROM_RF_CONFIG_TYPE_R2x2 0x1
-#define EEPROM_RF_CONFIG_TYPE_R1x2 0x2
#define EEPROM_RF_CONFIG_TYPE_MAX 0x3
-/*
- * Per-channel regulatory data.
- *
- * Each channel that *might* be supported by iwl has a fixed location
- * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
- * txpower (MSB).
- *
- * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
- * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
- *
- * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
- */
-#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */
-#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */
-#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */
-
-/*
- * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
- * 5.0 GHz channels 7, 8, 11, 12, 16
- * (4915-5080MHz) (none of these is ever supported)
- */
-#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */
-#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */
-
-/*
- * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
- * (5170-5320MHz)
- */
-#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */
-#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */
-
-/*
- * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
- * (5500-5700MHz)
- */
-#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */
-#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */
-
-/*
- * 5.7 GHz channels 145, 149, 153, 157, 161, 165
- * (5725-5825MHz)
- */
-#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */
-#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
-
-/*
- * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
- *
- * The channel listed is the center of the lower 20 MHz half of the channel.
- * The overall center frequency is actually 2 channels (10 MHz) above that,
- * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away
- * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5,
- * and the overall HT40 channel width centers on channel 3.
- *
- * NOTE: The RXON command uses 20 MHz channel numbers to specify the
- * control channel to which to tune. RXON also specifies whether the
- * control channel is the upper or lower half of a HT40 channel.
- *
- * NOTE: 4965 does not support HT40 channels on 2.4 GHz.
- */
-#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */
-
-/*
- * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64),
- * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
- */
-#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */
-
#define EEPROM_REGULATORY_BAND_NO_HT40 (0)
struct iwl_eeprom_ops {
const u32 regulatory_bands[7];
- int (*acquire_semaphore) (struct iwl_priv *priv);
- void (*release_semaphore) (struct iwl_priv *priv);
- u16 (*calib_version) (struct iwl_priv *priv);
const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset);
void (*update_enhanced_txpower) (struct iwl_priv *priv);
};
-int iwl_eeprom_init(struct iwl_priv *priv);
+int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev);
void iwl_eeprom_free(struct iwl_priv *priv);
int iwl_eeprom_check_version(struct iwl_priv *priv);
int iwl_eeprom_check_sku(struct iwl_priv *priv);
const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
int iwlcore_eeprom_verify_signature(struct iwl_priv *priv);
u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset);
-const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
int iwl_init_channel_map(struct iwl_priv *priv);
void iwl_free_channel_map(struct iwl_priv *priv);
const struct iwl_channel_info *iwl_get_channel_info(
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 474009a..6dfa806 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -77,14 +77,14 @@
/**
* Keep-Warm (KW) buffer base address.
*
- * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the
+ * Driver must allocate a 4KByte buffer that is for keeping the
* host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency
- * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host
+ * DRAM access when doing Txing or Rxing. The dummy accesses prevent host
* from going into a power-savings mode that would cause higher DRAM latency,
* and possible data over/under-runs, before all Tx/Rx is complete.
*
* Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4)
- * of the buffer, which must be 4K aligned. Once this is set up, the 4965
+ * of the buffer, which must be 4K aligned. Once this is set up, the device
* automatically invokes keep-warm accesses when normal accesses might not
* be sufficient to maintain fast DRAM response.
*
@@ -97,7 +97,7 @@
/**
* TFD Circular Buffers Base (CBBC) addresses
*
- * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident
+ * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident
* circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs)
* (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04
* bytes from one another. Each TFD circular buffer in DRAM must be 256-byte
@@ -116,16 +116,16 @@
/**
* Rx SRAM Control and Status Registers (RSCSR)
*
- * These registers provide handshake between driver and 4965 for the Rx queue
+ * These registers provide handshake between driver and device for the Rx queue
* (this queue handles *all* command responses, notifications, Rx data, etc.
- * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx
+ * sent from uCode to host driver). Unlike Tx, there is only one Rx
* queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can
* concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer
* Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1
* mapping between RBDs and RBs.
*
* Driver must allocate host DRAM memory for the following, and set the
- * physical address of each into 4965 registers:
+ * physical address of each into device registers:
*
* 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256
* entries (although any power of 2, up to 4096, is selectable by driver).
@@ -140,20 +140,20 @@
* Driver sets physical address [35:8] of base of RBD circular buffer
* into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
*
- * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers
+ * 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers
* (RBs) have been filled, via a "write pointer", actually the index of
* the RB's corresponding RBD within the circular buffer. Driver sets
* physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
*
* Bit fields in lower dword of Rx status buffer (upper dword not used
- * by driver; see struct iwl4965_shared, val0):
+ * by driver:
* 31-12: Not used by driver
* 11- 0: Index of last filled Rx buffer descriptor
- * (4965 writes, driver reads this value)
+ * (device writes, driver reads this value)
*
- * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must
+ * As the driver prepares Receive Buffers (RBs) for device to fill, driver must
* enter pointers to these RBs into contiguous RBD circular buffer entries,
- * and update the 4965's "write" index register,
+ * and update the device's "write" index register,
* FH_RSCSR_CHNL0_RBDCB_WPTR_REG.
*
* This "write" index corresponds to the *next* RBD that the driver will make
@@ -162,12 +162,12 @@
* RBs), should be 8 after preparing the first 8 RBs (for example), and must
* wrap back to 0 at the end of the circular buffer (but don't wrap before
* "read" index has advanced past 1! See below).
- * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8.
+ * NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8.
*
- * As the 4965 fills RBs (referenced from contiguous RBDs within the circular
+ * As the device fills RBs (referenced from contiguous RBDs within the circular
* buffer), it updates the Rx status buffer in host DRAM, 2) described above,
* to tell the driver the index of the latest filled RBD. The driver must
- * read this "read" index from DRAM after receiving an Rx interrupt from 4965.
+ * read this "read" index from DRAM after receiving an Rx interrupt from device
*
* The driver must also internally keep track of a third index, which is the
* next RBD to process. When receiving an Rx interrupt, driver should process
@@ -176,7 +176,7 @@
* driver may process the RB pointed to by RBD 0. Depending on volume of
* traffic, there may be many RBs to process.
*
- * If read index == write index, 4965 thinks there is no room to put new data.
+ * If read index == write index, device thinks there is no room to put new data.
* Due to this, the maximum number of filled RBs is 255, instead of 256. To
* be safe, make sure that there is a gap of at least 2 RBDs between "write"
* and "read" indexes; that is, make sure that there are no more than 254
@@ -303,7 +303,7 @@
/**
* Transmit DMA Channel Control/Status Registers (TCSR)
*
- * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels
+ * Device has one configuration register for each of 8 Tx DMA/FIFO channels
* supported in hardware (don't confuse these with the 16 Tx queues in DRAM,
* which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes.
*
@@ -326,7 +326,6 @@
#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60)
/* Find Control/Status reg for given Tx DMA/FIFO channel */
-#define FH49_TCSR_CHNL_NUM (7)
#define FH50_TCSR_CHNL_NUM (8)
/* TCSR: tx_config register values */
@@ -424,7 +423,6 @@
#define RX_LOW_WATERMARK 8
/* Size of one Rx buffer in host DRAM */
-#define IWL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */
#define IWL_RX_BUF_SIZE_4K (4 * 1024)
#define IWL_RX_BUF_SIZE_8K (8 * 1024)
@@ -443,7 +441,7 @@
__le16 closed_fr_num;
__le16 finished_rb_num;
__le16 finished_fr_nam;
- __le32 __unused; /* 3945 only */
+ __le32 __unused;
} __packed;
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 02499f6..8f0beb9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -51,9 +51,7 @@
IWL_CMD(REPLY_REMOVE_ALL_STA);
IWL_CMD(REPLY_TXFIFO_FLUSH);
IWL_CMD(REPLY_WEPKEY);
- IWL_CMD(REPLY_3945_RX);
IWL_CMD(REPLY_TX);
- IWL_CMD(REPLY_RATE_SCALE);
IWL_CMD(REPLY_LEDS_CMD);
IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
IWL_CMD(COEX_PRIORITY_TABLE_CMD);
@@ -145,10 +143,12 @@
{
int ret;
- BUG_ON(!(cmd->flags & CMD_ASYNC));
+ if (WARN_ON(!(cmd->flags & CMD_ASYNC)))
+ return -EINVAL;
/* An asynchronous command can not expect an SKB to be set. */
- BUG_ON(cmd->flags & CMD_WANT_SKB);
+ if (WARN_ON(cmd->flags & CMD_WANT_SKB))
+ return -EINVAL;
/* Assign a generic callback if one is not provided */
if (!cmd->callback)
@@ -171,14 +171,15 @@
int cmd_idx;
int ret;
- BUG_ON(cmd->flags & CMD_ASYNC);
+ if (WARN_ON(cmd->flags & CMD_ASYNC))
+ return -EINVAL;
/* A synchronous command can not have a callback set. */
- BUG_ON(cmd->callback);
+ if (WARN_ON(cmd->callback))
+ return -EINVAL;
IWL_DEBUG_INFO(priv, "Attempting to send sync command %s\n",
get_cmd_string(cmd->id));
- mutex_lock(&priv->sync_cmd_mutex);
set_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s\n",
@@ -189,7 +190,7 @@
ret = cmd_idx;
IWL_ERR(priv, "Error sending %s: enqueue_hcmd failed: %d\n",
get_cmd_string(cmd->id), ret);
- goto out;
+ return ret;
}
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -229,8 +230,7 @@
goto cancel;
}
- ret = 0;
- goto out;
+ return 0;
cancel:
if (cmd->flags & CMD_WANT_SKB) {
@@ -248,8 +248,7 @@
iwl_free_pages(priv, cmd->reply_page);
cmd->reply_page = 0;
}
-out:
- mutex_unlock(&priv->sync_cmd_mutex);
+
return ret;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index 8821f08..41207a3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -64,30 +64,6 @@
return --index & (n_bd - 1);
}
-/* TODO: Move fw_desc functions to iwl-pci.ko */
-static inline void iwl_free_fw_desc(struct pci_dev *pci_dev,
- struct fw_desc *desc)
-{
- if (desc->v_addr)
- dma_free_coherent(&pci_dev->dev, desc->len,
- desc->v_addr, desc->p_addr);
- desc->v_addr = NULL;
- desc->len = 0;
-}
-
-static inline int iwl_alloc_fw_desc(struct pci_dev *pci_dev,
- struct fw_desc *desc)
-{
- if (!desc->len) {
- desc->v_addr = NULL;
- return -EINVAL;
- }
-
- desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len,
- &desc->p_addr, GFP_KERNEL);
- return (desc->v_addr != NULL) ? 0 : -ENOMEM;
-}
-
/*
* we have 8 bits used like this:
*
@@ -131,6 +107,19 @@
ieee80211_stop_queue(priv->hw, ac);
}
+static inline void iwl_wake_any_queue(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ u8 ac;
+
+ for (ac = 0; ac < AC_NUM; ac++) {
+ IWL_DEBUG_INFO(priv, "Queue Status: Q[%d] %s\n",
+ ac, (atomic_read(&priv->queue_stop_count[ac]) > 0)
+ ? "stopped" : "awake");
+ iwl_wake_queue(priv, &priv->txq[ctx->ac_to_queue[ac]]);
+ }
+}
+
#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue
#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c
new file mode 100644
index 0000000..aa4a906
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-io.c
@@ -0,0 +1,294 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include "iwl-io.h"
+
+#define IWL_POLL_INTERVAL 10 /* microseconds */
+
+static inline void __iwl_set_bit(struct iwl_priv *priv, u32 reg, u32 mask)
+{
+ iwl_write32(priv, reg, iwl_read32(priv, reg) | mask);
+}
+
+static inline void __iwl_clear_bit(struct iwl_priv *priv, u32 reg, u32 mask)
+{
+ iwl_write32(priv, reg, iwl_read32(priv, reg) & ~mask);
+}
+
+void iwl_set_bit(struct iwl_priv *priv, u32 reg, u32 mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ __iwl_set_bit(priv, reg, mask);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+void iwl_clear_bit(struct iwl_priv *priv, u32 reg, u32 mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ __iwl_clear_bit(priv, reg, mask);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+int iwl_poll_bit(struct iwl_priv *priv, u32 addr,
+ u32 bits, u32 mask, int timeout)
+{
+ int t = 0;
+
+ do {
+ if ((iwl_read32(priv, addr) & mask) == (bits & mask))
+ return t;
+ udelay(IWL_POLL_INTERVAL);
+ t += IWL_POLL_INTERVAL;
+ } while (t < timeout);
+
+ return -ETIMEDOUT;
+}
+
+int iwl_grab_nic_access_silent(struct iwl_priv *priv)
+{
+ int ret;
+
+ lockdep_assert_held(&priv->reg_lock);
+
+ /* this bit wakes up the NIC */
+ __iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+
+ /*
+ * These bits say the device is running, and should keep running for
+ * at least a short while (at least as long as MAC_ACCESS_REQ stays 1),
+ * but they do not indicate that embedded SRAM is restored yet;
+ * 3945 and 4965 have volatile SRAM, and must save/restore contents
+ * to/from host DRAM when sleeping/waking for power-saving.
+ * Each direction takes approximately 1/4 millisecond; with this
+ * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a
+ * series of register accesses are expected (e.g. reading Event Log),
+ * to keep device from sleeping.
+ *
+ * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that
+ * SRAM is okay/restored. We don't check that here because this call
+ * is just for hardware register access; but GP1 MAC_SLEEP check is a
+ * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log).
+ *
+ * 5000 series and later (including 1000 series) have non-volatile SRAM,
+ * and do not save/restore SRAM when power cycling.
+ */
+ ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN,
+ (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY |
+ CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000);
+ if (ret < 0) {
+ iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+int iwl_grab_nic_access(struct iwl_priv *priv)
+{
+ int ret = iwl_grab_nic_access_silent(priv);
+ if (ret) {
+ u32 val = iwl_read32(priv, CSR_GP_CNTRL);
+ IWL_ERR(priv,
+ "MAC is in deep sleep!. CSR_GP_CNTRL = 0x%08X\n", val);
+ }
+
+ return ret;
+}
+
+void iwl_release_nic_access(struct iwl_priv *priv)
+{
+ lockdep_assert_held(&priv->reg_lock);
+ __iwl_clear_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+}
+
+u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
+{
+ u32 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ iwl_grab_nic_access(priv);
+ value = iwl_read32(priv, reg);
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+
+ return value;
+}
+
+void iwl_write_direct32(struct iwl_priv *priv, u32 reg, u32 value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ if (!iwl_grab_nic_access(priv)) {
+ iwl_write32(priv, reg, value);
+ iwl_release_nic_access(priv);
+ }
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+int iwl_poll_direct_bit(struct iwl_priv *priv, u32 addr, u32 mask,
+ int timeout)
+{
+ int t = 0;
+
+ do {
+ if ((iwl_read_direct32(priv, addr) & mask) == mask)
+ return t;
+ udelay(IWL_POLL_INTERVAL);
+ t += IWL_POLL_INTERVAL;
+ } while (t < timeout);
+
+ return -ETIMEDOUT;
+}
+
+static inline u32 __iwl_read_prph(struct iwl_priv *priv, u32 reg)
+{
+ iwl_write32(priv, HBUS_TARG_PRPH_RADDR, reg | (3 << 24));
+ rmb();
+ return iwl_read32(priv, HBUS_TARG_PRPH_RDAT);
+}
+
+static inline void __iwl_write_prph(struct iwl_priv *priv, u32 addr, u32 val)
+{
+ iwl_write32(priv, HBUS_TARG_PRPH_WADDR,
+ ((addr & 0x0000FFFF) | (3 << 24)));
+ wmb();
+ iwl_write32(priv, HBUS_TARG_PRPH_WDAT, val);
+}
+
+u32 iwl_read_prph(struct iwl_priv *priv, u32 reg)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ iwl_grab_nic_access(priv);
+ val = __iwl_read_prph(priv, reg);
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+ return val;
+}
+
+void iwl_write_prph(struct iwl_priv *priv, u32 addr, u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ if (!iwl_grab_nic_access(priv)) {
+ __iwl_write_prph(priv, addr, val);
+ iwl_release_nic_access(priv);
+ }
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+void iwl_set_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ iwl_grab_nic_access(priv);
+ __iwl_write_prph(priv, reg, __iwl_read_prph(priv, reg) | mask);
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+void iwl_set_bits_mask_prph(struct iwl_priv *priv, u32 reg,
+ u32 bits, u32 mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ iwl_grab_nic_access(priv);
+ __iwl_write_prph(priv, reg,
+ (__iwl_read_prph(priv, reg) & mask) | bits);
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+void iwl_clear_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ iwl_grab_nic_access(priv);
+ val = __iwl_read_prph(priv, reg);
+ __iwl_write_prph(priv, reg, (val & ~mask));
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+void _iwl_read_targ_mem_words(struct iwl_priv *priv, u32 addr,
+ void *buf, int words)
+{
+ unsigned long flags;
+ int offs;
+ u32 *vals = buf;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ iwl_grab_nic_access(priv);
+
+ iwl_write32(priv, HBUS_TARG_MEM_RADDR, addr);
+ rmb();
+
+ for (offs = 0; offs < words; offs++)
+ vals[offs] = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
+
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+u32 iwl_read_targ_mem(struct iwl_priv *priv, u32 addr)
+{
+ u32 value;
+
+ _iwl_read_targ_mem_words(priv, addr, &value, 1);
+
+ return value;
+}
+
+void iwl_write_targ_mem(struct iwl_priv *priv, u32 addr, u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ if (!iwl_grab_nic_access(priv)) {
+ iwl_write32(priv, HBUS_TARG_MEM_WADDR, addr);
+ wmb();
+ iwl_write32(priv, HBUS_TARG_MEM_WDAT, val);
+ iwl_release_nic_access(priv);
+ }
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 0203a3b..869edc5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project.
*
@@ -35,494 +35,58 @@
#include "iwl-debug.h"
#include "iwl-devtrace.h"
-/*
- * IO, register, and NIC memory access functions
- *
- * NOTE on naming convention and macro usage for these
- *
- * A single _ prefix before a an access function means that no state
- * check or debug information is printed when that function is called.
- *
- * A double __ prefix before an access function means that state is checked
- * and the current line number and caller function name are printed in addition
- * to any other debug output.
- *
- * The non-prefixed name is the #define that maps the caller into a
- * #define that provides the caller's name and __LINE__ to the double
- * prefix version.
- *
- * If you wish to call the function without any debug or state checking,
- * you should use the single _ prefix version (as is used by dependent IO
- * routines, for example _iwl_read_direct32 calls the non-check version of
- * _iwl_read32.)
- *
- * These declarations are *extremely* useful in quickly isolating code deltas
- * which result in misconfiguration of the hardware I/O. In combination with
- * git-bisect and the IO debug level you can quickly determine the specific
- * commit which breaks the IO sequence to the hardware.
- *
- */
-
-static inline void _iwl_write8(struct iwl_priv *priv, u32 ofs, u8 val)
+static inline void iwl_write8(struct iwl_priv *priv, u32 ofs, u8 val)
{
trace_iwlwifi_dev_iowrite8(priv, ofs, val);
iowrite8(val, priv->hw_base + ofs);
}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_write8(const char *f, u32 l, struct iwl_priv *priv,
- u32 ofs, u8 val)
-{
- IWL_DEBUG_IO(priv, "write8(0x%08X, 0x%02X) - %s %d\n", ofs, val, f, l);
- _iwl_write8(priv, ofs, val);
-}
-#define iwl_write8(priv, ofs, val) \
- __iwl_write8(__FILE__, __LINE__, priv, ofs, val)
-#else
-#define iwl_write8(priv, ofs, val) _iwl_write8(priv, ofs, val)
-#endif
-
-
-static inline void _iwl_write32(struct iwl_priv *priv, u32 ofs, u32 val)
+static inline void iwl_write32(struct iwl_priv *priv, u32 ofs, u32 val)
{
trace_iwlwifi_dev_iowrite32(priv, ofs, val);
iowrite32(val, priv->hw_base + ofs);
}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv,
- u32 ofs, u32 val)
-{
- IWL_DEBUG_IO(priv, "write32(0x%08X, 0x%08X) - %s %d\n", ofs, val, f, l);
- _iwl_write32(priv, ofs, val);
-}
-#define iwl_write32(priv, ofs, val) \
- __iwl_write32(__FILE__, __LINE__, priv, ofs, val)
-#else
-#define iwl_write32(priv, ofs, val) _iwl_write32(priv, ofs, val)
-#endif
-
-static inline u32 _iwl_read32(struct iwl_priv *priv, u32 ofs)
+static inline u32 iwl_read32(struct iwl_priv *priv, u32 ofs)
{
u32 val = ioread32(priv->hw_base + ofs);
trace_iwlwifi_dev_ioread32(priv, ofs, val);
return val;
}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs)
-{
- IWL_DEBUG_IO(priv, "read_direct32(0x%08X) - %s %d\n", ofs, f, l);
- return _iwl_read32(priv, ofs);
-}
-#define iwl_read32(priv, ofs) __iwl_read32(__FILE__, __LINE__, priv, ofs)
-#else
-#define iwl_read32(p, o) _iwl_read32(p, o)
-#endif
+void iwl_set_bit(struct iwl_priv *priv, u32 reg, u32 mask);
+void iwl_clear_bit(struct iwl_priv *priv, u32 reg, u32 mask);
-#define IWL_POLL_INTERVAL 10 /* microseconds */
-static inline int _iwl_poll_bit(struct iwl_priv *priv, u32 addr,
- u32 bits, u32 mask, int timeout)
-{
- int t = 0;
+int iwl_poll_bit(struct iwl_priv *priv, u32 addr,
+ u32 bits, u32 mask, int timeout);
+int iwl_poll_direct_bit(struct iwl_priv *priv, u32 addr, u32 mask,
+ int timeout);
- do {
- if ((_iwl_read32(priv, addr) & mask) == (bits & mask))
- return t;
- udelay(IWL_POLL_INTERVAL);
- t += IWL_POLL_INTERVAL;
- } while (t < timeout);
+int iwl_grab_nic_access_silent(struct iwl_priv *priv);
+int iwl_grab_nic_access(struct iwl_priv *priv);
+void iwl_release_nic_access(struct iwl_priv *priv);
- return -ETIMEDOUT;
-}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline int __iwl_poll_bit(const char *f, u32 l,
- struct iwl_priv *priv, u32 addr,
- u32 bits, u32 mask, int timeout)
-{
- int ret = _iwl_poll_bit(priv, addr, bits, mask, timeout);
- IWL_DEBUG_IO(priv, "poll_bit(0x%08X, 0x%08X, 0x%08X) - %s- %s %d\n",
- addr, bits, mask,
- unlikely(ret == -ETIMEDOUT) ? "timeout" : "", f, l);
- return ret;
-}
-#define iwl_poll_bit(priv, addr, bits, mask, timeout) \
- __iwl_poll_bit(__FILE__, __LINE__, priv, addr, bits, mask, timeout)
-#else
-#define iwl_poll_bit(p, a, b, m, t) _iwl_poll_bit(p, a, b, m, t)
-#endif
+u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg);
+void iwl_write_direct32(struct iwl_priv *priv, u32 reg, u32 value);
-static inline void _iwl_set_bit(struct iwl_priv *priv, u32 reg, u32 mask)
-{
- _iwl_write32(priv, reg, _iwl_read32(priv, reg) | mask);
-}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_set_bit(const char *f, u32 l,
- struct iwl_priv *priv, u32 reg, u32 mask)
-{
- u32 val = _iwl_read32(priv, reg) | mask;
- IWL_DEBUG_IO(priv, "set_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
- _iwl_write32(priv, reg, val);
-}
-static inline void iwl_set_bit(struct iwl_priv *p, u32 r, u32 m)
-{
- unsigned long reg_flags;
- spin_lock_irqsave(&p->reg_lock, reg_flags);
- __iwl_set_bit(__FILE__, __LINE__, p, r, m);
- spin_unlock_irqrestore(&p->reg_lock, reg_flags);
-}
-#else
-static inline void iwl_set_bit(struct iwl_priv *p, u32 r, u32 m)
-{
- unsigned long reg_flags;
+u32 iwl_read_prph(struct iwl_priv *priv, u32 reg);
+void iwl_write_prph(struct iwl_priv *priv, u32 addr, u32 val);
+void iwl_set_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask);
+void iwl_set_bits_mask_prph(struct iwl_priv *priv, u32 reg,
+ u32 bits, u32 mask);
+void iwl_clear_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask);
- spin_lock_irqsave(&p->reg_lock, reg_flags);
- _iwl_set_bit(p, r, m);
- spin_unlock_irqrestore(&p->reg_lock, reg_flags);
-}
-#endif
+void _iwl_read_targ_mem_words(struct iwl_priv *priv, u32 addr,
+ void *buf, int words);
-static inline void _iwl_clear_bit(struct iwl_priv *priv, u32 reg, u32 mask)
-{
- _iwl_write32(priv, reg, _iwl_read32(priv, reg) & ~mask);
-}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_clear_bit(const char *f, u32 l,
- struct iwl_priv *priv, u32 reg, u32 mask)
-{
- u32 val = _iwl_read32(priv, reg) & ~mask;
- IWL_DEBUG_IO(priv, "clear_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
- _iwl_write32(priv, reg, val);
-}
-static inline void iwl_clear_bit(struct iwl_priv *p, u32 r, u32 m)
-{
- unsigned long reg_flags;
+#define iwl_read_targ_mem_words(priv, addr, buf, bufsize) \
+ do { \
+ BUILD_BUG_ON((bufsize) % sizeof(u32)); \
+ _iwl_read_targ_mem_words(priv, addr, buf, \
+ (bufsize) / sizeof(u32));\
+ } while (0)
- spin_lock_irqsave(&p->reg_lock, reg_flags);
- __iwl_clear_bit(__FILE__, __LINE__, p, r, m);
- spin_unlock_irqrestore(&p->reg_lock, reg_flags);
-}
-#else
-static inline void iwl_clear_bit(struct iwl_priv *p, u32 r, u32 m)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&p->reg_lock, reg_flags);
- _iwl_clear_bit(p, r, m);
- spin_unlock_irqrestore(&p->reg_lock, reg_flags);
-}
-#endif
-
-static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
-{
- int ret;
- u32 val;
-
- /* this bit wakes up the NIC */
- _iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
- /*
- * These bits say the device is running, and should keep running for
- * at least a short while (at least as long as MAC_ACCESS_REQ stays 1),
- * but they do not indicate that embedded SRAM is restored yet;
- * 3945 and 4965 have volatile SRAM, and must save/restore contents
- * to/from host DRAM when sleeping/waking for power-saving.
- * Each direction takes approximately 1/4 millisecond; with this
- * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a
- * series of register accesses are expected (e.g. reading Event Log),
- * to keep device from sleeping.
- *
- * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that
- * SRAM is okay/restored. We don't check that here because this call
- * is just for hardware register access; but GP1 MAC_SLEEP check is a
- * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log).
- *
- * 5000 series and later (including 1000 series) have non-volatile SRAM,
- * and do not save/restore SRAM when power cycling.
- */
- ret = _iwl_poll_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN,
- (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY |
- CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000);
- if (ret < 0) {
- val = _iwl_read32(priv, CSR_GP_CNTRL);
- IWL_ERR(priv, "MAC is in deep sleep!. CSR_GP_CNTRL = 0x%08X\n", val);
- _iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI);
- return -EIO;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline int __iwl_grab_nic_access(const char *f, u32 l,
- struct iwl_priv *priv)
-{
- IWL_DEBUG_IO(priv, "grabbing nic access - %s %d\n", f, l);
- return _iwl_grab_nic_access(priv);
-}
-#define iwl_grab_nic_access(priv) \
- __iwl_grab_nic_access(__FILE__, __LINE__, priv)
-#else
-#define iwl_grab_nic_access(priv) \
- _iwl_grab_nic_access(priv)
-#endif
-
-static inline void _iwl_release_nic_access(struct iwl_priv *priv)
-{
- _iwl_clear_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_release_nic_access(const char *f, u32 l,
- struct iwl_priv *priv)
-{
-
- IWL_DEBUG_IO(priv, "releasing nic access - %s %d\n", f, l);
- _iwl_release_nic_access(priv);
-}
-#define iwl_release_nic_access(priv) \
- __iwl_release_nic_access(__FILE__, __LINE__, priv)
-#else
-#define iwl_release_nic_access(priv) \
- _iwl_release_nic_access(priv)
-#endif
-
-static inline u32 _iwl_read_direct32(struct iwl_priv *priv, u32 reg)
-{
- return _iwl_read32(priv, reg);
-}
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline u32 __iwl_read_direct32(const char *f, u32 l,
- struct iwl_priv *priv, u32 reg)
-{
- u32 value = _iwl_read_direct32(priv, reg);
- IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d\n", reg, value,
- f, l);
- return value;
-}
-static inline u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
-{
- u32 value;
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
- value = __iwl_read_direct32(__FILE__, __LINE__, priv, reg);
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- return value;
-}
-
-#else
-static inline u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
-{
- u32 value;
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
- value = _iwl_read_direct32(priv, reg);
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- return value;
-
-}
-#endif
-
-static inline void _iwl_write_direct32(struct iwl_priv *priv,
- u32 reg, u32 value)
-{
- _iwl_write32(priv, reg, value);
-}
-static inline void iwl_write_direct32(struct iwl_priv *priv, u32 reg, u32 value)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- if (!iwl_grab_nic_access(priv)) {
- _iwl_write_direct32(priv, reg, value);
- iwl_release_nic_access(priv);
- }
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
-
-static inline void iwl_write_reg_buf(struct iwl_priv *priv,
- u32 reg, u32 len, u32 *values)
-{
- u32 count = sizeof(u32);
-
- if ((priv != NULL) && (values != NULL)) {
- for (; 0 < len; len -= count, reg += count, values++)
- iwl_write_direct32(priv, reg, *values);
- }
-}
-
-static inline int _iwl_poll_direct_bit(struct iwl_priv *priv, u32 addr,
- u32 mask, int timeout)
-{
- int t = 0;
-
- do {
- if ((iwl_read_direct32(priv, addr) & mask) == mask)
- return t;
- udelay(IWL_POLL_INTERVAL);
- t += IWL_POLL_INTERVAL;
- } while (t < timeout);
-
- return -ETIMEDOUT;
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline int __iwl_poll_direct_bit(const char *f, u32 l,
- struct iwl_priv *priv,
- u32 addr, u32 mask, int timeout)
-{
- int ret = _iwl_poll_direct_bit(priv, addr, mask, timeout);
-
- if (unlikely(ret == -ETIMEDOUT))
- IWL_DEBUG_IO(priv, "poll_direct_bit(0x%08X, 0x%08X) - "
- "timedout - %s %d\n", addr, mask, f, l);
- else
- IWL_DEBUG_IO(priv, "poll_direct_bit(0x%08X, 0x%08X) = 0x%08X "
- "- %s %d\n", addr, mask, ret, f, l);
- return ret;
-}
-#define iwl_poll_direct_bit(priv, addr, mask, timeout) \
- __iwl_poll_direct_bit(__FILE__, __LINE__, priv, addr, mask, timeout)
-#else
-#define iwl_poll_direct_bit _iwl_poll_direct_bit
-#endif
-
-static inline u32 _iwl_read_prph(struct iwl_priv *priv, u32 reg)
-{
- _iwl_write_direct32(priv, HBUS_TARG_PRPH_RADDR, reg | (3 << 24));
- rmb();
- return _iwl_read_direct32(priv, HBUS_TARG_PRPH_RDAT);
-}
-static inline u32 iwl_read_prph(struct iwl_priv *priv, u32 reg)
-{
- unsigned long reg_flags;
- u32 val;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
- val = _iwl_read_prph(priv, reg);
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- return val;
-}
-
-static inline void _iwl_write_prph(struct iwl_priv *priv,
- u32 addr, u32 val)
-{
- _iwl_write_direct32(priv, HBUS_TARG_PRPH_WADDR,
- ((addr & 0x0000FFFF) | (3 << 24)));
- wmb();
- _iwl_write_direct32(priv, HBUS_TARG_PRPH_WDAT, val);
-}
-
-static inline void iwl_write_prph(struct iwl_priv *priv, u32 addr, u32 val)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- if (!iwl_grab_nic_access(priv)) {
- _iwl_write_prph(priv, addr, val);
- iwl_release_nic_access(priv);
- }
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
-
-#define _iwl_set_bits_prph(priv, reg, mask) \
- _iwl_write_prph(priv, reg, (_iwl_read_prph(priv, reg) | mask))
-
-static inline void iwl_set_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
- _iwl_set_bits_prph(priv, reg, mask);
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
-
-#define _iwl_set_bits_mask_prph(priv, reg, bits, mask) \
- _iwl_write_prph(priv, reg, ((_iwl_read_prph(priv, reg) & mask) | bits))
-
-static inline void iwl_set_bits_mask_prph(struct iwl_priv *priv, u32 reg,
- u32 bits, u32 mask)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
- _iwl_set_bits_mask_prph(priv, reg, bits, mask);
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
-
-static inline void iwl_clear_bits_prph(struct iwl_priv
- *priv, u32 reg, u32 mask)
-{
- unsigned long reg_flags;
- u32 val;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
- val = _iwl_read_prph(priv, reg);
- _iwl_write_prph(priv, reg, (val & ~mask));
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
-
-static inline u32 iwl_read_targ_mem(struct iwl_priv *priv, u32 addr)
-{
- unsigned long reg_flags;
- u32 value;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
-
- _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, addr);
- rmb();
- value = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- return value;
-}
-
-static inline void iwl_write_targ_mem(struct iwl_priv *priv, u32 addr, u32 val)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- if (!iwl_grab_nic_access(priv)) {
- _iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
- wmb();
- _iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, val);
- iwl_release_nic_access(priv);
- }
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
-
-static inline void iwl_write_targ_mem_buf(struct iwl_priv *priv, u32 addr,
- u32 len, u32 *values)
-{
- unsigned long reg_flags;
-
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- if (!iwl_grab_nic_access(priv)) {
- _iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
- wmb();
- for (; 0 < len; len -= sizeof(u32), values++)
- _iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, *values);
-
- iwl_release_nic_access(priv);
- }
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-}
+u32 iwl_read_targ_mem(struct iwl_priv *priv, u32 addr);
+void iwl_write_targ_mem(struct iwl_priv *priv, u32 addr, u32 val);
#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index d7f2a0b..439187f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -48,8 +48,21 @@
MODULE_PARM_DESC(led_mode, "0=system default, "
"1=On(RF On)/Off(RF Off), 2=blinking");
+/* Throughput OFF time(ms) ON time (ms)
+ * >300 25 25
+ * >200 to 300 40 40
+ * >100 to 200 55 55
+ * >70 to 100 65 65
+ * >50 to 70 75 75
+ * >20 to 50 85 85
+ * >10 to 20 95 95
+ * >5 to 10 110 110
+ * >1 to 5 130 130
+ * >0 to 1 167 167
+ * <=0 SOLID ON
+ */
static const struct ieee80211_tpt_blink iwl_blink[] = {
- { .throughput = 0 * 1024 - 1, .blink_time = 334 },
+ { .throughput = 0, .blink_time = 334 },
{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
@@ -61,10 +74,16 @@
{ .throughput = 300 * 1024 - 1, .blink_time = 50 },
};
+/* Set led register off */
+void iwlagn_led_enable(struct iwl_priv *priv)
+{
+ iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
+}
+
/*
* Adjust led blink rate to compensate on a MAC Clock difference on every HW
- * Led blink rate analysis showed an average deviation of 0% on 3945,
- * 5% on 4965 HW and 20% on 5000 series and up.
+ * Led blink rate analysis showed an average deviation of 20% on 5000 series
+ * and up.
* Need to compensate on the led on/off time per HW according to the deviation
* to achieve the desired led frequency
* The calculation is: (100-averageDeviation)/100 * blinkTime
@@ -84,6 +103,24 @@
return (u8)((time * compensation) >> 6);
}
+static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
+{
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_LEDS_CMD,
+ .len = sizeof(struct iwl_led_cmd),
+ .data = led_cmd,
+ .flags = CMD_ASYNC,
+ .callback = NULL,
+ };
+ u32 reg;
+
+ reg = iwl_read32(priv, CSR_LED_REG);
+ if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
+ iwl_write32(priv, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
+
+ return iwl_send_cmd(priv, &cmd);
+}
+
/* Set led pattern command */
static int iwl_led_cmd(struct iwl_priv *priv,
unsigned long on,
@@ -101,6 +138,11 @@
if (priv->blink_on == on && priv->blink_off == off)
return 0;
+ if (off == 0) {
+ /* led is SOLID_ON */
+ on = IWL_LED_SOLID;
+ }
+
IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n",
priv->cfg->base_params->led_compensation);
led_cmd.on = iwl_blink_compensation(priv, on,
@@ -108,7 +150,7 @@
led_cmd.off = iwl_blink_compensation(priv, off,
priv->cfg->base_params->led_compensation);
- ret = priv->cfg->ops->led->cmd(priv, &led_cmd);
+ ret = iwl_send_led_cmd(priv, &led_cmd);
if (!ret) {
priv->blink_on = on;
priv->blink_off = off;
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index 101eef1..1c93dfe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -50,6 +50,7 @@
IWL_LED_BLINK,
};
+void iwlagn_led_enable(struct iwl_priv *priv);
void iwl_leds_init(struct iwl_priv *priv);
void iwl_leds_exit(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 576795e..595c930 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -188,9 +188,10 @@
table = range_0;
}
- BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
-
- *cmd = table[lvl].cmd;
+ if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
+ memset(cmd, 0, sizeof(*cmd));
+ else
+ *cmd = table[lvl].cmd;
if (period == 0) {
skip = 0;
@@ -354,16 +355,12 @@
dtimper = priv->hw->conf.ps_dtim_period ?: 1;
- if (priv->cfg->base_params->broken_powersave)
- iwl_power_sleep_cam_cmd(priv, cmd);
- else if (priv->hw->conf.flags & IEEE80211_CONF_IDLE)
+ if (priv->hw->conf.flags & IEEE80211_CONF_IDLE)
iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
- else if (priv->cfg->ops->lib->tt_ops.lower_power_detection &&
- priv->cfg->ops->lib->tt_ops.tt_power_mode &&
- priv->cfg->ops->lib->tt_ops.lower_power_detection(priv)) {
+ else if (iwl_tt_is_low_power_state(priv)) {
/* in thermal throttling low power state */
iwl_static_sleep_cmd(priv, cmd,
- priv->cfg->ops->lib->tt_ops.tt_power_mode(priv), dtimper);
+ iwl_tt_current_power_mode(priv), dtimper);
} else if (!enabled)
iwl_power_sleep_cam_cmd(priv, cmd);
else if (priv->power_data.debug_sleep_level_override >= 0)
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index fe01203..59635d7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 86f5123..f00d188 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -91,7 +91,6 @@
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
-#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
@@ -99,152 +98,6 @@
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
/**
- * BSM (Bootstrap State Machine)
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down when the embedded control
- * processor is sleeping (e.g. for periodic power-saving shutdowns of radio).
- *
- * When powering back up after sleeps (or during initial uCode load), the BSM
- * internally loads the short bootstrap program from the special SRAM into the
- * embedded processor's instruction SRAM, and starts the processor so it runs
- * the bootstrap program.
- *
- * This bootstrap program loads (via PCI busmaster DMA) instructions and data
- * images for a uCode program from host DRAM locations. The host driver
- * indicates DRAM locations and sizes for instruction and data images via the
- * four BSM_DRAM_* registers. Once the bootstrap program loads the new program,
- * the new program starts automatically.
- *
- * The uCode used for open-source drivers includes two programs:
- *
- * 1) Initialization -- performs hardware calibration and sets up some
- * internal data, then notifies host via "initialize alive" notification
- * (struct iwl_init_alive_resp) that it has completed all of its work.
- * After signal from host, it then loads and starts the runtime program.
- * The initialization program must be used when initially setting up the
- * NIC after loading the driver.
- *
- * 2) Runtime/Protocol -- performs all normal runtime operations. This
- * notifies host via "alive" notification (struct iwl_alive_resp) that it
- * is ready to be used.
- *
- * When initializing the NIC, the host driver does the following procedure:
- *
- * 1) Load bootstrap program (instructions only, no data image for bootstrap)
- * into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND
- *
- * 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction
- * images in host DRAM.
- *
- * 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked:
- * BSM_WR_MEM_SRC_REG = 0
- * BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND
- * BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image
- *
- * 4) Load bootstrap into instruction SRAM:
- * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START
- *
- * 5) Wait for load completion:
- * Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0
- *
- * 6) Enable future boot loads whenever NIC's power management triggers it:
- * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN
- *
- * 7) Start the NIC by removing all reset bits:
- * CSR_RESET = 0
- *
- * The bootstrap uCode (already in instruction SRAM) loads initialization
- * uCode. Initialization uCode performs data initialization, sends
- * "initialize alive" notification to host, and waits for a signal from
- * host to load runtime code.
- *
- * 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction
- * images in host DRAM. The last register loaded must be the instruction
- * byte count register ("1" in MSbit tells initialization uCode to load
- * the runtime uCode):
- * BSM_DRAM_INST_BYTECOUNT_REG = byte count | BSM_DRAM_INST_LOAD
- *
- * 5) Wait for "alive" notification, then issue normal runtime commands.
- *
- * Data caching during power-downs:
- *
- * Just before the embedded controller powers down (e.g for automatic
- * power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA)
- * a current snapshot of the embedded processor's data SRAM into host DRAM.
- * This caches the data while the embedded processor's memory is powered down.
- * Location and size are controlled by BSM_DRAM_DATA_* registers.
- *
- * NOTE: Instruction SRAM does not need to be saved, since that doesn't
- * change during operation; the original image (from uCode distribution
- * file) can be used for reload.
- *
- * When powering back up, the BSM loads the bootstrap program. Bootstrap looks
- * at the BSM_DRAM_* registers, which now point to the runtime instruction
- * image and the cached (modified) runtime data (*not* the initialization
- * uCode). Bootstrap reloads these runtime images into SRAM, and restarts the
- * uCode from where it left off before the power-down.
- *
- * NOTE: Initialization uCode does *not* run as part of the save/restore
- * procedure.
- *
- * This save/restore method is mostly for autonomous power management during
- * normal operation (result of POWER_TABLE_CMD). Platform suspend/resume and
- * RFKILL should use complete restarts (with total re-initialization) of uCode,
- * allowing total shutdown (including BSM memory).
- *
- * Note that, during normal operation, the host DRAM that held the initial
- * startup data for the runtime code is now being used as a backup data cache
- * for modified data! If you need to completely re-initialize the NIC, make
- * sure that you use the runtime data image from the uCode distribution file,
- * not the modified/saved runtime data. You may want to store a separate
- * "clean" runtime data image in DRAM to avoid disk reads of distribution file.
- */
-
-/* BSM bit fields */
-#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */
-#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup*/
-#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */
-
-/* BSM addresses */
-#define BSM_BASE (PRPH_BASE + 0x3400)
-#define BSM_END (PRPH_BASE + 0x3800)
-
-#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */
-#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */
-#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */
-#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */
-#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */
-
-/*
- * Pointers and size regs for bootstrap load and data SRAM save/restore.
- * NOTE: 3945 pointers use bits 31:0 of DRAM address.
- * 4965 pointers use bits 35:4 of DRAM address.
- */
-#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090)
-#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094)
-#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098)
-#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C)
-
-/*
- * BSM special memory, stays powered on during power-save sleeps.
- * Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1)
- */
-#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800)
-#define BSM_SRAM_SIZE (1024) /* bytes */
-
-
-/* 3945 Tx scheduler registers */
-#define ALM_SCD_BASE (PRPH_BASE + 0x2E00)
-#define ALM_SCD_MODE_REG (ALM_SCD_BASE + 0x000)
-#define ALM_SCD_ARASTAT_REG (ALM_SCD_BASE + 0x004)
-#define ALM_SCD_TXFACT_REG (ALM_SCD_BASE + 0x010)
-#define ALM_SCD_TXF4MF_REG (ALM_SCD_BASE + 0x014)
-#define ALM_SCD_TXF5MF_REG (ALM_SCD_BASE + 0x020)
-#define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C)
-#define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030)
-
-/**
* Tx Scheduler
*
* The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
@@ -254,17 +107,7 @@
* device. A queue maps to only one (selectable by driver) Tx DMA channel,
* but one DMA channel may take input from several queues.
*
- * Tx DMA FIFOs have dedicated purposes. For 4965, they are used as follows
- * (cf. default_queue_to_tx_fifo in iwl-4965.c):
- *
- * 0 -- EDCA BK (background) frames, lowest priority
- * 1 -- EDCA BE (best effort) frames, normal priority
- * 2 -- EDCA VI (video) frames, higher priority
- * 3 -- EDCA VO (voice) and management frames, highest priority
- * 4 -- Commands (e.g. RXON, etc.)
- * 5 -- unused (HCCA)
- * 6 -- unused (HCCA)
- * 7 -- not used by driver (device-internal only)
+ * Tx DMA FIFOs have dedicated purposes.
*
* For 5000 series and up, they are used differently
* (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
@@ -298,7 +141,7 @@
* Tx completion may end up being out-of-order).
*
* The driver must maintain the queue's Byte Count table in host DRAM
- * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode.
+ * for this mode.
* This mode does not support fragmentation.
*
* 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
@@ -311,7 +154,7 @@
*
* Driver controls scheduler operation via 3 means:
* 1) Scheduler registers
- * 2) Shared scheduler data base in internal 4956 SRAM
+ * 2) Shared scheduler data base in internal SRAM
* 3) Shared data in host DRAM
*
* Initialization:
@@ -330,201 +173,10 @@
* Max Tx window size is the max number of contiguous TFDs that the scheduler
* can keep track of at one time when creating block-ack chains of frames.
* Note that "64" matches the number of ack bits in a block-ack packet.
- * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize
- * IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) values.
*/
#define SCD_WIN_SIZE 64
#define SCD_FRAME_LIMIT 64
-/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */
-#define IWL49_SCD_START_OFFSET 0xa02c00
-
-/*
- * 4965 tells driver SRAM address for internal scheduler structs via this reg.
- * Value is valid only after "Alive" response from uCode.
- */
-#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x0)
-
-/*
- * Driver may need to update queue-empty bits after changing queue's
- * write and read pointers (indexes) during (re-)initialization (i.e. when
- * scheduler is not tracking what's happening).
- * Bit fields:
- * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit
- * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty
- * NOTE: This register is not used by Linux driver.
- */
-#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_START_OFFSET + 0x4)
-
-/*
- * Physical base address of array of byte count (BC) circular buffers (CBs).
- * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode.
- * This register points to BC CB for queue 0, must be on 1024-byte boundary.
- * Others are spaced by 1024 bytes.
- * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad.
- * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff).
- * Bit fields:
- * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned.
- */
-#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x10)
-
-/*
- * Enables any/all Tx DMA/FIFO channels.
- * Scheduler generates requests for only the active channels.
- * Set this to 0xff to enable all 8 channels (normal usage).
- * Bit fields:
- * 7- 0: Enable (1), disable (0), one bit for each channel 0-7
- */
-#define IWL49_SCD_TXFACT (IWL49_SCD_START_OFFSET + 0x1c)
-/*
- * Queue (x) Write Pointers (indexes, really!), one for each Tx queue.
- * Initialized and updated by driver as new TFDs are added to queue.
- * NOTE: If using Block Ack, index must correspond to frame's
- * Start Sequence Number; index = (SSN & 0xff)
- * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses?
- */
-#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_START_OFFSET + 0x24 + (x) * 4)
-
-/*
- * Queue (x) Read Pointers (indexes, really!), one for each Tx queue.
- * For FIFO mode, index indicates next frame to transmit.
- * For Scheduler-ACK mode, index indicates first frame in Tx window.
- * Initialized by driver, updated by scheduler.
- */
-#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_START_OFFSET + 0x64 + (x) * 4)
-
-/*
- * Select which queues work in chain mode (1) vs. not (0).
- * Use chain mode to build chains of aggregated frames.
- * Bit fields:
- * 31-16: Reserved
- * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time
- * NOTE: If driver sets up queue for chain mode, it should be also set up
- * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x).
- */
-#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_START_OFFSET + 0xd0)
-
-/*
- * Select which queues interrupt driver when scheduler increments
- * a queue's read pointer (index).
- * Bit fields:
- * 31-16: Reserved
- * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled
- * NOTE: This functionality is apparently a no-op; driver relies on interrupts
- * from Rx queue to read Tx command responses and update Tx queues.
- */
-#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_START_OFFSET + 0xe4)
-
-/*
- * Queue search status registers. One for each queue.
- * Sets up queue mode and assigns queue to Tx DMA channel.
- * Bit fields:
- * 19-10: Write mask/enable bits for bits 0-9
- * 9: Driver should init to "0"
- * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0).
- * Driver should init to "1" for aggregation mode, or "0" otherwise.
- * 7-6: Driver should init to "0"
- * 5: Window Size Left; indicates whether scheduler can request
- * another TFD, based on window size, etc. Driver should init
- * this bit to "1" for aggregation mode, or "0" for non-agg.
- * 4-1: Tx FIFO to use (range 0-7).
- * 0: Queue is active (1), not active (0).
- * Other bits should be written as "0"
- *
- * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled
- * via SCD_QUEUECHAIN_SEL.
- */
-#define IWL49_SCD_QUEUE_STATUS_BITS(x)\
- (IWL49_SCD_START_OFFSET + 0x104 + (x) * 4)
-
-/* Bit field positions */
-#define IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0)
-#define IWL49_SCD_QUEUE_STTS_REG_POS_TXF (1)
-#define IWL49_SCD_QUEUE_STTS_REG_POS_WSL (5)
-#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8)
-
-/* Write masks */
-#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10)
-#define IWL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00)
-
-/**
- * 4965 internal SRAM structures for scheduler, shared with driver ...
- *
- * Driver should clear and initialize the following areas after receiving
- * "Alive" response from 4965 uCode, i.e. after initial
- * uCode load, or after a uCode load done for error recovery:
- *
- * SCD_CONTEXT_DATA_OFFSET (size 128 bytes)
- * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes)
- * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes)
- *
- * Driver accesses SRAM via HBUS_TARG_MEM_* registers.
- * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR.
- * All OFFSET values must be added to this base address.
- */
-
-/*
- * Queue context. One 8-byte entry for each of 16 queues.
- *
- * Driver should clear this entire area (size 0x80) to 0 after receiving
- * "Alive" notification from uCode. Additionally, driver should init
- * each queue's entry as follows:
- *
- * LS Dword bit fields:
- * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64.
- *
- * MS Dword bit fields:
- * 16-22: Frame limit. Driver should init to 10 (0xa).
- *
- * Driver should init all other bits to 0.
- *
- * Init must be done after driver receives "Alive" response from 4965 uCode,
- * and when setting up queue for aggregation.
- */
-#define IWL49_SCD_CONTEXT_DATA_OFFSET 0x380
-#define IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) \
- (IWL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8))
-
-#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0)
-#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F)
-#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
-#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
-
-/*
- * Tx Status Bitmap
- *
- * Driver should clear this entire area (size 0x100) to 0 after receiving
- * "Alive" notification from uCode. Area is used only by device itself;
- * no other support (besides clearing) is required from driver.
- */
-#define IWL49_SCD_TX_STTS_BITMAP_OFFSET 0x400
-
-/*
- * RAxTID to queue translation mapping.
- *
- * When queue is in Scheduler-ACK mode, frames placed in a that queue must be
- * for only one combination of receiver address (RA) and traffic ID (TID), i.e.
- * one QOS priority level destined for one station (for this wireless link,
- * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit
- * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK
- * mode, the device ignores the mapping value.
- *
- * Bit fields, for each 16-bit map:
- * 15-9: Reserved, set to 0
- * 8-4: Index into device's station table for recipient station
- * 3-0: Traffic ID (tid), range 0-15
- *
- * Driver should clear this entire area (size 32 bytes) to 0 after receiving
- * "Alive" notification from uCode. To update a 16-bit map value, driver
- * must read a dword-aligned value from device SRAM, replace the 16-bit map
- * value of interest, and write the dword value back into device SRAM.
- */
-#define IWL49_SCD_TRANSLATE_TBL_OFFSET 0x500
-
-/* Find translation table dword to read/write for given queue */
-#define IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \
- ((IWL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc)
-
#define IWL_SCD_TXFIFO_POS_TID (0)
#define IWL_SCD_TXFIFO_POS_RA (4)
#define IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 6f9a2fa..0053e9e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -225,55 +225,6 @@
*
******************************************************************************/
-static void iwl_rx_reply_alive(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl_alive_resp *palive;
- struct delayed_work *pwork;
-
- palive = &pkt->u.alive_frame;
-
- IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
- "0x%01X 0x%01X\n",
- palive->is_valid, palive->ver_type,
- palive->ver_subtype);
-
- if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- memcpy(&priv->card_alive_init,
- &pkt->u.alive_frame,
- sizeof(struct iwl_init_alive_resp));
- pwork = &priv->init_alive_start;
- } else {
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
- memcpy(&priv->card_alive, &pkt->u.alive_frame,
- sizeof(struct iwl_alive_resp));
- pwork = &priv->alive_start;
- }
-
- /* We delay the ALIVE response by 5ms to
- * give the HW RF Kill time to activate... */
- if (palive->is_valid == UCODE_VALID_OK)
- queue_delayed_work(priv->workqueue, pwork,
- msecs_to_jiffies(5));
- else {
- IWL_WARN(priv, "%s uCode did not respond OK.\n",
- (palive->ver_subtype == INITIALIZE_SUBTYPE) ?
- "init" : "runtime");
- /*
- * If fail to load init uCode,
- * let's try to load the init uCode again.
- * We should not get into this situation, but if it
- * does happen, we should not move on and loading "runtime"
- * without proper calibrate the device.
- */
- if (palive->ver_subtype == INITIALIZE_SUBTYPE)
- priv->ucode_type = UCODE_NONE;
- queue_work(priv->workqueue, &priv->restart);
- }
-}
-
static void iwl_rx_reply_error(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
@@ -390,21 +341,16 @@
* the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
* operation state.
*/
-static bool iwl_good_ack_health(struct iwl_priv *priv, struct iwl_rx_packet *pkt)
+static bool iwl_good_ack_health(struct iwl_priv *priv,
+ struct statistics_tx *cur)
{
int actual_delta, expected_delta, ba_timeout_delta;
- struct statistics_tx *cur, *old;
+ struct statistics_tx *old;
if (priv->_agn.agg_tids_count)
return true;
- if (iwl_bt_statistics(priv)) {
- cur = &pkt->u.stats_bt.tx;
- old = &priv->_agn.statistics_bt.tx;
- } else {
- cur = &pkt->u.stats.tx;
- old = &priv->_agn.statistics.tx;
- }
+ old = &priv->statistics.tx;
actual_delta = le32_to_cpu(cur->actual_ack_cnt) -
le32_to_cpu(old->actual_ack_cnt);
@@ -430,10 +376,10 @@
* DEBUG is not, these will just compile out.
*/
IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta %d\n",
- priv->_agn.delta_statistics.tx.rx_detected_cnt);
+ priv->delta_stats.tx.rx_detected_cnt);
IWL_DEBUG_RADIO(priv,
"ack_or_ba_timeout_collision delta %d\n",
- priv->_agn.delta_statistics.tx.ack_or_ba_timeout_collision);
+ priv->delta_stats.tx.ack_or_ba_timeout_collision);
#endif
if (ba_timeout_delta >= BA_TIMEOUT_MAX)
@@ -450,7 +396,9 @@
* to improve the throughput.
*/
static bool iwl_good_plcp_health(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt, unsigned int msecs)
+ struct statistics_rx_phy *cur_ofdm,
+ struct statistics_rx_ht_phy *cur_ofdm_ht,
+ unsigned int msecs)
{
int delta;
int threshold = priv->cfg->base_params->plcp_delta_threshold;
@@ -460,29 +408,12 @@
return true;
}
- if (iwl_bt_statistics(priv)) {
- struct statistics_rx_bt *cur, *old;
+ delta = le32_to_cpu(cur_ofdm->plcp_err) -
+ le32_to_cpu(priv->statistics.rx_ofdm.plcp_err) +
+ le32_to_cpu(cur_ofdm_ht->plcp_err) -
+ le32_to_cpu(priv->statistics.rx_ofdm_ht.plcp_err);
- cur = &pkt->u.stats_bt.rx;
- old = &priv->_agn.statistics_bt.rx;
-
- delta = le32_to_cpu(cur->ofdm.plcp_err) -
- le32_to_cpu(old->ofdm.plcp_err) +
- le32_to_cpu(cur->ofdm_ht.plcp_err) -
- le32_to_cpu(old->ofdm_ht.plcp_err);
- } else {
- struct statistics_rx *cur, *old;
-
- cur = &pkt->u.stats.rx;
- old = &priv->_agn.statistics.rx;
-
- delta = le32_to_cpu(cur->ofdm.plcp_err) -
- le32_to_cpu(old->ofdm.plcp_err) +
- le32_to_cpu(cur->ofdm_ht.plcp_err) -
- le32_to_cpu(old->ofdm_ht.plcp_err);
- }
-
- /* Can be negative if firmware reseted statistics */
+ /* Can be negative if firmware reset statistics */
if (delta <= 0)
return true;
@@ -497,44 +428,35 @@
}
static void iwl_recover_from_statistics(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt)
+ struct statistics_rx_phy *cur_ofdm,
+ struct statistics_rx_ht_phy *cur_ofdm_ht,
+ struct statistics_tx *tx,
+ unsigned long stamp)
{
- const struct iwl_mod_params *mod_params = priv->cfg->mod_params;
unsigned int msecs;
- unsigned long stamp;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- stamp = jiffies;
msecs = jiffies_to_msecs(stamp - priv->rx_statistics_jiffies);
/* Only gather statistics and update time stamp when not associated */
if (!iwl_is_any_associated(priv))
- goto out;
+ return;
/* Do not check/recover when do not have enough statistics data */
if (msecs < 99)
return;
- if (mod_params->ack_check && !iwl_good_ack_health(priv, pkt)) {
+ if (iwlagn_mod_params.ack_check && !iwl_good_ack_health(priv, tx)) {
IWL_ERR(priv, "low ack count detected, restart firmware\n");
if (!iwl_force_reset(priv, IWL_FW_RESET, false))
return;
}
- if (mod_params->plcp_check && !iwl_good_plcp_health(priv, pkt, msecs))
+ if (iwlagn_mod_params.plcp_check &&
+ !iwl_good_plcp_health(priv, cur_ofdm, cur_ofdm_ht, msecs))
iwl_force_reset(priv, IWL_RF_RESET, false);
-
-out:
- if (iwl_bt_statistics(priv))
- memcpy(&priv->_agn.statistics_bt, &pkt->u.stats_bt,
- sizeof(priv->_agn.statistics_bt));
- else
- memcpy(&priv->_agn.statistics, &pkt->u.stats,
- sizeof(priv->_agn.statistics));
-
- priv->rx_statistics_jiffies = stamp;
}
/* Calculate noise level, based on measurements during network silence just
@@ -548,10 +470,8 @@
int bcn_silence_a, bcn_silence_b, bcn_silence_c;
int last_rx_noise;
- if (iwl_bt_statistics(priv))
- rx_info = &(priv->_agn.statistics_bt.rx.general.common);
- else
- rx_info = &(priv->_agn.statistics.rx.general);
+ rx_info = &priv->statistics.rx_non_phy;
+
bcn_silence_a =
le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
bcn_silence_b =
@@ -583,105 +503,153 @@
last_rx_noise);
}
+#ifdef CONFIG_IWLWIFI_DEBUGFS
/*
* based on the assumption of all statistics counter are in DWORD
* FIXME: This function is for debugging, do not deal with
* the case of counters roll-over.
*/
-static void iwl_accumulative_statistics(struct iwl_priv *priv,
- __le32 *stats)
+static void accum_stats(__le32 *prev, __le32 *cur, __le32 *delta,
+ __le32 *max_delta, __le32 *accum, int size)
{
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- int i, size;
- __le32 *prev_stats;
- u32 *accum_stats;
- u32 *delta, *max_delta;
- struct statistics_general_common *general, *accum_general;
- struct statistics_tx *tx, *accum_tx;
+ int i;
- if (iwl_bt_statistics(priv)) {
- prev_stats = (__le32 *)&priv->_agn.statistics_bt;
- accum_stats = (u32 *)&priv->_agn.accum_statistics_bt;
- size = sizeof(struct iwl_bt_notif_statistics);
- general = &priv->_agn.statistics_bt.general.common;
- accum_general = &priv->_agn.accum_statistics_bt.general.common;
- tx = &priv->_agn.statistics_bt.tx;
- accum_tx = &priv->_agn.accum_statistics_bt.tx;
- delta = (u32 *)&priv->_agn.delta_statistics_bt;
- max_delta = (u32 *)&priv->_agn.max_delta_bt;
- } else {
- prev_stats = (__le32 *)&priv->_agn.statistics;
- accum_stats = (u32 *)&priv->_agn.accum_statistics;
- size = sizeof(struct iwl_notif_statistics);
- general = &priv->_agn.statistics.general.common;
- accum_general = &priv->_agn.accum_statistics.general.common;
- tx = &priv->_agn.statistics.tx;
- accum_tx = &priv->_agn.accum_statistics.tx;
- delta = (u32 *)&priv->_agn.delta_statistics;
- max_delta = (u32 *)&priv->_agn.max_delta;
- }
- for (i = sizeof(__le32); i < size;
- i += sizeof(__le32), stats++, prev_stats++, delta++,
- max_delta++, accum_stats++) {
- if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
- *delta = (le32_to_cpu(*stats) -
- le32_to_cpu(*prev_stats));
- *accum_stats += *delta;
- if (*delta > *max_delta)
+ for (i = 0;
+ i < size / sizeof(__le32);
+ i++, prev++, cur++, delta++, max_delta++, accum++) {
+ if (le32_to_cpu(*cur) > le32_to_cpu(*prev)) {
+ *delta = cpu_to_le32(
+ le32_to_cpu(*cur) - le32_to_cpu(*prev));
+ le32_add_cpu(accum, le32_to_cpu(*delta));
+ if (le32_to_cpu(*delta) > le32_to_cpu(*max_delta))
*max_delta = *delta;
}
}
-
- /* reset accumulative statistics for "no-counter" type statistics */
- accum_general->temperature = general->temperature;
- accum_general->temperature_m = general->temperature_m;
- accum_general->ttl_timestamp = general->ttl_timestamp;
- accum_tx->tx_power.ant_a = tx->tx_power.ant_a;
- accum_tx->tx_power.ant_b = tx->tx_power.ant_b;
- accum_tx->tx_power.ant_c = tx->tx_power.ant_c;
-#endif
}
+static void
+iwl_accumulative_statistics(struct iwl_priv *priv,
+ struct statistics_general_common *common,
+ struct statistics_rx_non_phy *rx_non_phy,
+ struct statistics_rx_phy *rx_ofdm,
+ struct statistics_rx_ht_phy *rx_ofdm_ht,
+ struct statistics_rx_phy *rx_cck,
+ struct statistics_tx *tx,
+ struct statistics_bt_activity *bt_activity)
+{
+#define ACCUM(_name) \
+ accum_stats((__le32 *)&priv->statistics._name, \
+ (__le32 *)_name, \
+ (__le32 *)&priv->delta_stats._name, \
+ (__le32 *)&priv->max_delta_stats._name, \
+ (__le32 *)&priv->accum_stats._name, \
+ sizeof(*_name));
+
+ ACCUM(common);
+ ACCUM(rx_non_phy);
+ ACCUM(rx_ofdm);
+ ACCUM(rx_ofdm_ht);
+ ACCUM(rx_cck);
+ ACCUM(tx);
+ if (bt_activity)
+ ACCUM(bt_activity);
+#undef ACCUM
+}
+#else
+static inline void
+iwl_accumulative_statistics(struct iwl_priv *priv,
+ struct statistics_general_common *common,
+ struct statistics_rx_non_phy *rx_non_phy,
+ struct statistics_rx_phy *rx_ofdm,
+ struct statistics_rx_ht_phy *rx_ofdm_ht,
+ struct statistics_rx_phy *rx_cck,
+ struct statistics_tx *tx,
+ struct statistics_bt_activity *bt_activity)
+{
+}
+#endif
+
static void iwl_rx_statistics(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
+ unsigned long stamp = jiffies;
const int reg_recalib_period = 60;
int change;
struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+ __le32 *flag;
+ struct statistics_general_common *common;
+ struct statistics_rx_non_phy *rx_non_phy;
+ struct statistics_rx_phy *rx_ofdm;
+ struct statistics_rx_ht_phy *rx_ofdm_ht;
+ struct statistics_rx_phy *rx_cck;
+ struct statistics_tx *tx;
+ struct statistics_bt_activity *bt_activity;
- if (iwl_bt_statistics(priv)) {
- IWL_DEBUG_RX(priv,
- "Statistics notification received (%d vs %d).\n",
- (int)sizeof(struct iwl_bt_notif_statistics),
- le32_to_cpu(pkt->len_n_flags) &
- FH_RSCSR_FRAME_SIZE_MSK);
+ len -= sizeof(struct iwl_cmd_header); /* skip header */
- change = ((priv->_agn.statistics_bt.general.common.temperature !=
- pkt->u.stats_bt.general.common.temperature) ||
- ((priv->_agn.statistics_bt.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
- (pkt->u.stats_bt.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
+ IWL_DEBUG_RX(priv, "Statistics notification received (%d bytes).\n",
+ len);
- iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats_bt);
+ if (len == sizeof(struct iwl_bt_notif_statistics)) {
+ struct iwl_bt_notif_statistics *stats;
+ stats = &pkt->u.stats_bt;
+ flag = &stats->flag;
+ common = &stats->general.common;
+ rx_non_phy = &stats->rx.general.common;
+ rx_ofdm = &stats->rx.ofdm;
+ rx_ofdm_ht = &stats->rx.ofdm_ht;
+ rx_cck = &stats->rx.cck;
+ tx = &stats->tx;
+ bt_activity = &stats->general.activity;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+ /* handle this exception directly */
+ priv->statistics.num_bt_kills = stats->rx.general.num_bt_kills;
+ le32_add_cpu(&priv->statistics.accum_num_bt_kills,
+ le32_to_cpu(stats->rx.general.num_bt_kills));
+#endif
+ } else if (len == sizeof(struct iwl_notif_statistics)) {
+ struct iwl_notif_statistics *stats;
+ stats = &pkt->u.stats;
+ flag = &stats->flag;
+ common = &stats->general.common;
+ rx_non_phy = &stats->rx.general;
+ rx_ofdm = &stats->rx.ofdm;
+ rx_ofdm_ht = &stats->rx.ofdm_ht;
+ rx_cck = &stats->rx.cck;
+ tx = &stats->tx;
+ bt_activity = NULL;
} else {
- IWL_DEBUG_RX(priv,
- "Statistics notification received (%d vs %d).\n",
- (int)sizeof(struct iwl_notif_statistics),
- le32_to_cpu(pkt->len_n_flags) &
- FH_RSCSR_FRAME_SIZE_MSK);
-
- change = ((priv->_agn.statistics.general.common.temperature !=
- pkt->u.stats.general.common.temperature) ||
- ((priv->_agn.statistics.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
- (pkt->u.stats.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
-
- iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
+ WARN_ONCE(1, "len %d doesn't match BT (%zu) or normal (%zu)\n",
+ len, sizeof(struct iwl_bt_notif_statistics),
+ sizeof(struct iwl_notif_statistics));
+ return;
}
- iwl_recover_from_statistics(priv, pkt);
+ change = common->temperature != priv->statistics.common.temperature ||
+ (*flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
+ (priv->statistics.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK);
+
+ iwl_accumulative_statistics(priv, common, rx_non_phy, rx_ofdm,
+ rx_ofdm_ht, rx_cck, tx, bt_activity);
+
+ iwl_recover_from_statistics(priv, rx_ofdm, rx_ofdm_ht, tx, stamp);
+
+ priv->statistics.flag = *flag;
+ memcpy(&priv->statistics.common, common, sizeof(*common));
+ memcpy(&priv->statistics.rx_non_phy, rx_non_phy, sizeof(*rx_non_phy));
+ memcpy(&priv->statistics.rx_ofdm, rx_ofdm, sizeof(*rx_ofdm));
+ memcpy(&priv->statistics.rx_ofdm_ht, rx_ofdm_ht, sizeof(*rx_ofdm_ht));
+ memcpy(&priv->statistics.rx_cck, rx_cck, sizeof(*rx_cck));
+ memcpy(&priv->statistics.tx, tx, sizeof(*tx));
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+ if (bt_activity)
+ memcpy(&priv->statistics.bt_activity, bt_activity,
+ sizeof(*bt_activity));
+#endif
+
+ priv->rx_statistics_jiffies = stamp;
set_bit(STATUS_STATISTICS, &priv->status);
@@ -708,18 +676,12 @@
if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATISTICS_CLEAR_MSK) {
#ifdef CONFIG_IWLWIFI_DEBUGFS
- memset(&priv->_agn.accum_statistics, 0,
- sizeof(struct iwl_notif_statistics));
- memset(&priv->_agn.delta_statistics, 0,
- sizeof(struct iwl_notif_statistics));
- memset(&priv->_agn.max_delta, 0,
- sizeof(struct iwl_notif_statistics));
- memset(&priv->_agn.accum_statistics_bt, 0,
- sizeof(struct iwl_bt_notif_statistics));
- memset(&priv->_agn.delta_statistics_bt, 0,
- sizeof(struct iwl_bt_notif_statistics));
- memset(&priv->_agn.max_delta_bt, 0,
- sizeof(struct iwl_bt_notif_statistics));
+ memset(&priv->accum_stats, 0,
+ sizeof(priv->accum_stats));
+ memset(&priv->delta_stats, 0,
+ sizeof(priv->delta_stats));
+ memset(&priv->max_delta_stats, 0,
+ sizeof(priv->max_delta_stats));
#endif
IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
}
@@ -873,6 +835,7 @@
{
struct sk_buff *skb;
__le16 fc = hdr->frame_control;
+ struct iwl_rxon_context *ctx;
/* We only process data packets if the interface is open */
if (unlikely(!priv->is_open)) {
@@ -882,7 +845,7 @@
}
/* In case of HW accelerated crypto and bad decryption, drop */
- if (!priv->cfg->mod_params->sw_crypto &&
+ if (!iwlagn_mod_params.sw_crypto &&
iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
@@ -895,10 +858,29 @@
skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
iwl_update_stats(priv, false, fc, len);
+
+ /*
+ * Wake any queues that were stopped due to a passive channel tx
+ * failure. This can happen because the regulatory enforcement in
+ * the device waits for a beacon before allowing transmission,
+ * sometimes even after already having transmitted frames for the
+ * association because the new RXON may reset the information.
+ */
+ if (unlikely(ieee80211_is_beacon(fc))) {
+ for_each_context(priv, ctx) {
+ if (!ctx->last_tx_rejected)
+ continue;
+ if (compare_ether_addr(hdr->addr3,
+ ctx->active.bssid_addr))
+ continue;
+ ctx->last_tx_rejected = false;
+ iwl_wake_any_queue(priv, ctx);
+ }
+ }
+
memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
ieee80211_rx(priv->hw, skb);
- priv->alloc_rxb_page--;
rxb->page = NULL;
}
@@ -1093,7 +1075,6 @@
handlers = priv->rx_handlers;
- handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
handlers[REPLY_ERROR] = iwl_rx_reply_error;
handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
handlers[SPECTRUM_MEASURE_NOTIFICATION] = iwl_rx_spectrum_measure_notif;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 914c77e..d60d630 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -2,7 +2,7 @@
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.h b/drivers/net/wireless/iwlwifi/iwl-spectrum.h
deleted file mode 100644
index c4ca0b5..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#ifndef __iwl_spectrum_h__
-#define __iwl_spectrum_h__
-enum { /* ieee80211_basic_report.map */
- IEEE80211_BASIC_MAP_BSS = (1 << 0),
- IEEE80211_BASIC_MAP_OFDM = (1 << 1),
- IEEE80211_BASIC_MAP_UNIDENTIFIED = (1 << 2),
- IEEE80211_BASIC_MAP_RADAR = (1 << 3),
- IEEE80211_BASIC_MAP_UNMEASURED = (1 << 4),
- /* Bits 5-7 are reserved */
-
-};
-struct ieee80211_basic_report {
- u8 channel;
- __le64 start_time;
- __le16 duration;
- u8 map;
-} __packed;
-
-enum { /* ieee80211_measurement_request.mode */
- /* Bit 0 is reserved */
- IEEE80211_MEASUREMENT_ENABLE = (1 << 1),
- IEEE80211_MEASUREMENT_REQUEST = (1 << 2),
- IEEE80211_MEASUREMENT_REPORT = (1 << 3),
- /* Bits 4-7 are reserved */
-};
-
-enum {
- IEEE80211_REPORT_BASIC = 0, /* required */
- IEEE80211_REPORT_CCA = 1, /* optional */
- IEEE80211_REPORT_RPI = 2, /* optional */
- /* 3-255 reserved */
-};
-
-struct ieee80211_measurement_params {
- u8 channel;
- __le64 start_time;
- __le16 duration;
-} __packed;
-
-struct ieee80211_info_element {
- u8 id;
- u8 len;
- u8 data[0];
-} __packed;
-
-struct ieee80211_measurement_request {
- struct ieee80211_info_element ie;
- u8 token;
- u8 mode;
- u8 type;
- struct ieee80211_measurement_params params[0];
-} __packed;
-
-struct ieee80211_measurement_report {
- struct ieee80211_info_element ie;
- u8 token;
- u8 mode;
- u8 type;
- union {
- struct ieee80211_basic_report basic[0];
- } u;
-} __packed;
-
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index bc90a12..3c8cebd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -233,7 +233,6 @@
struct iwl_station_entry *station;
int i;
u8 sta_id = IWL_INVALID_STATION;
- u16 rate;
if (is_ap)
sta_id = ctx->ap_sta_id;
@@ -306,12 +305,6 @@
*/
iwl_set_ht_add_station(priv, sta_id, sta, ctx);
- /* 3945 only */
- rate = (priv->band == IEEE80211_BAND_5GHZ) ?
- IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP;
- /* Turn on both antennas for the station... */
- station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
-
return sta_id;
}
@@ -501,7 +494,8 @@
priv->num_stations--;
- BUG_ON(priv->num_stations < 0);
+ if (WARN_ON(priv->num_stations < 0))
+ priv->num_stations = 0;
spin_unlock_irqrestore(&priv->sta_lock, flags);
@@ -686,7 +680,8 @@
priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE;
priv->num_stations--;
- BUG_ON(priv->num_stations < 0);
+ if (WARN_ON(priv->num_stations < 0))
+ priv->num_stations = 0;
kfree(priv->stations[i].lq);
priv->stations[i].lq = NULL;
}
@@ -782,7 +777,8 @@
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
iwl_dump_lq_cmd(priv, lq);
- BUG_ON(init && (cmd.flags & CMD_ASYNC));
+ if (WARN_ON(init && (cmd.flags & CMD_ASYNC)))
+ return -EINVAL;
if (is_lq_table_valid(priv, ctx, lq))
ret = iwl_send_cmd(priv, &cmd);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 206f1e1..ff64027 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-sv-open.c b/drivers/net/wireless/iwlwifi/iwl-sv-open.c
new file mode 100644
index 0000000..89b6696
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-sv-open.c
@@ -0,0 +1,469 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <net/net_namespace.h>
+#include <linux/netdevice.h>
+#include <net/cfg80211.h>
+#include <net/mac80211.h>
+#include <net/netlink.h>
+
+
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-debug.h"
+#include "iwl-fh.h"
+#include "iwl-io.h"
+#include "iwl-agn.h"
+#include "iwl-testmode.h"
+
+
+/* The TLVs used in the gnl message policy between the kernel module and
+ * user space application. iwl_testmode_gnl_msg_policy is to be carried
+ * through the NL80211_CMD_TESTMODE channel regulated by nl80211.
+ * See iwl-testmode.h
+ */
+static
+struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
+ [IWL_TM_ATTR_COMMAND] = { .type = NLA_U32, },
+
+ [IWL_TM_ATTR_UCODE_CMD_ID] = { .type = NLA_U8, },
+ [IWL_TM_ATTR_UCODE_CMD_DATA] = { .type = NLA_UNSPEC, },
+
+ [IWL_TM_ATTR_REG_OFFSET] = { .type = NLA_U32, },
+ [IWL_TM_ATTR_REG_VALUE8] = { .type = NLA_U8, },
+ [IWL_TM_ATTR_REG_VALUE32] = { .type = NLA_U32, },
+
+ [IWL_TM_ATTR_SYNC_RSP] = { .type = NLA_UNSPEC, },
+ [IWL_TM_ATTR_UCODE_RX_PKT] = { .type = NLA_UNSPEC, },
+};
+
+/*
+ * See the struct iwl_rx_packet in iwl-commands.h for the format of the
+ * received events from the device
+ */
+static inline int get_event_length(struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ if (pkt)
+ return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+ else
+ return 0;
+}
+
+
+/*
+ * This function multicasts the spontaneous messages from the device to the
+ * user space. It is invoked whenever there is a received messages
+ * from the device. This function is called within the ISR of the rx handlers
+ * in iwlagn driver.
+ *
+ * The parsing of the message content is left to the user space application,
+ * The message content is treated as unattacked raw data and is encapsulated
+ * with IWL_TM_ATTR_UCODE_RX_PKT multicasting to the user space.
+ *
+ * @priv: the instance of iwlwifi device
+ * @rxb: pointer to rx data content received by the ISR
+ *
+ * See the message policies and TLVs in iwl_testmode_gnl_msg_policy[].
+ * For the messages multicasting to the user application, the mandatory
+ * TLV fields are :
+ * IWL_TM_ATTR_COMMAND must be IWL_TM_CMD_DEV2APP_UCODE_RX_PKT
+ * IWL_TM_ATTR_UCODE_RX_PKT for carrying the message content
+ */
+
+static void iwl_testmode_ucode_rx_pkt(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct ieee80211_hw *hw = priv->hw;
+ struct sk_buff *skb;
+ void *data;
+ int length;
+
+ data = (void *)rxb_addr(rxb);
+ length = get_event_length(rxb);
+
+ if (!data || length == 0)
+ return;
+
+ skb = cfg80211_testmode_alloc_event_skb(hw->wiphy, 20 + length,
+ GFP_ATOMIC);
+ if (skb == NULL) {
+ IWL_DEBUG_INFO(priv,
+ "Run out of memory for messages to user space ?\n");
+ return;
+ }
+ NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, IWL_TM_CMD_DEV2APP_UCODE_RX_PKT);
+ NLA_PUT(skb, IWL_TM_ATTR_UCODE_RX_PKT, length, data);
+ cfg80211_testmode_event(skb, GFP_ATOMIC);
+ return;
+
+nla_put_failure:
+ kfree_skb(skb);
+ IWL_DEBUG_INFO(priv, "Ouch, overran buffer, check allocation!\n");
+}
+
+void iwl_testmode_init(struct iwl_priv *priv)
+{
+ priv->pre_rx_handler = iwl_testmode_ucode_rx_pkt;
+}
+
+/*
+ * This function handles the user application commands to the ucode.
+ *
+ * It retrieves the mandatory fields IWL_TM_ATTR_UCODE_CMD_ID and
+ * IWL_TM_ATTR_UCODE_CMD_DATA and calls to the handler to send the
+ * host command to the ucode.
+ *
+ * If any mandatory field is missing, -ENOMSG is replied to the user space
+ * application; otherwise, the actual execution result of the host command to
+ * ucode is replied.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_ucode(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+ struct iwl_priv *priv = hw->priv;
+ struct iwl_host_cmd cmd;
+
+ memset(&cmd, 0, sizeof(struct iwl_host_cmd));
+
+ if (!tb[IWL_TM_ATTR_UCODE_CMD_ID] ||
+ !tb[IWL_TM_ATTR_UCODE_CMD_DATA]) {
+ IWL_DEBUG_INFO(priv,
+ "Error finding ucode command mandatory fields\n");
+ return -ENOMSG;
+ }
+
+ cmd.id = nla_get_u8(tb[IWL_TM_ATTR_UCODE_CMD_ID]);
+ cmd.data = nla_data(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
+ cmd.len = nla_len(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
+ IWL_INFO(priv, "testmode ucode command ID 0x%x, flags 0x%x,"
+ " len %d\n", cmd.id, cmd.flags, cmd.len);
+ /* ok, let's submit the command to ucode */
+ return iwl_send_cmd(priv, &cmd);
+}
+
+
+/*
+ * This function handles the user application commands for register access.
+ *
+ * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
+ * handlers respectively.
+ *
+ * If it's an unknown commdn ID, -ENOSYS is returned; or -ENOMSG if the
+ * mandatory fields(IWL_TM_ATTR_REG_OFFSET,IWL_TM_ATTR_REG_VALUE32,
+ * IWL_TM_ATTR_REG_VALUE8) are missing; Otherwise 0 is replied indicating
+ * the success of the command execution.
+ *
+ * If IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_READ32, the register read
+ * value is returned with IWL_TM_ATTR_REG_VALUE32.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_reg(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+ struct iwl_priv *priv = hw->priv;
+ u32 ofs, val32;
+ u8 val8;
+ struct sk_buff *skb;
+ int status = 0;
+
+ if (!tb[IWL_TM_ATTR_REG_OFFSET]) {
+ IWL_DEBUG_INFO(priv, "Error finding register offset\n");
+ return -ENOMSG;
+ }
+ ofs = nla_get_u32(tb[IWL_TM_ATTR_REG_OFFSET]);
+ IWL_INFO(priv, "testmode register access command offset 0x%x\n", ofs);
+
+ switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+ case IWL_TM_CMD_APP2DEV_REG_READ32:
+ val32 = iwl_read32(priv, ofs);
+ IWL_INFO(priv, "32bit value to read 0x%x\n", val32);
+
+ skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
+ if (!skb) {
+ IWL_DEBUG_INFO(priv, "Error allocating memory\n");
+ return -ENOMEM;
+ }
+ NLA_PUT_U32(skb, IWL_TM_ATTR_REG_VALUE32, val32);
+ status = cfg80211_testmode_reply(skb);
+ if (status < 0)
+ IWL_DEBUG_INFO(priv,
+ "Error sending msg : %d\n", status);
+ break;
+ case IWL_TM_CMD_APP2DEV_REG_WRITE32:
+ if (!tb[IWL_TM_ATTR_REG_VALUE32]) {
+ IWL_DEBUG_INFO(priv,
+ "Error finding value to write\n");
+ return -ENOMSG;
+ } else {
+ val32 = nla_get_u32(tb[IWL_TM_ATTR_REG_VALUE32]);
+ IWL_INFO(priv, "32bit value to write 0x%x\n", val32);
+ iwl_write32(priv, ofs, val32);
+ }
+ break;
+ case IWL_TM_CMD_APP2DEV_REG_WRITE8:
+ if (!tb[IWL_TM_ATTR_REG_VALUE8]) {
+ IWL_DEBUG_INFO(priv, "Error finding value to write\n");
+ return -ENOMSG;
+ } else {
+ val8 = nla_get_u8(tb[IWL_TM_ATTR_REG_VALUE8]);
+ IWL_INFO(priv, "8bit value to write 0x%x\n", val8);
+ iwl_write8(priv, ofs, val8);
+ }
+ break;
+ default:
+ IWL_DEBUG_INFO(priv, "Unknown testmode register command ID\n");
+ return -ENOSYS;
+ }
+
+ return status;
+
+nla_put_failure:
+ kfree_skb(skb);
+ return -EMSGSIZE;
+}
+
+
+static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv)
+{
+ struct iwl_notification_wait calib_wait;
+ int ret;
+
+ iwlagn_init_notification_wait(priv, &calib_wait,
+ CALIBRATION_COMPLETE_NOTIFICATION,
+ NULL, NULL);
+ ret = iwlagn_init_alive_start(priv);
+ if (ret) {
+ IWL_DEBUG_INFO(priv,
+ "Error configuring init calibration: %d\n", ret);
+ goto cfg_init_calib_error;
+ }
+
+ ret = iwlagn_wait_notification(priv, &calib_wait, 2 * HZ);
+ if (ret)
+ IWL_DEBUG_INFO(priv, "Error detecting"
+ " CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret);
+ return ret;
+
+cfg_init_calib_error:
+ iwlagn_remove_notification(priv, &calib_wait);
+ return ret;
+}
+
+/*
+ * This function handles the user application commands for driver.
+ *
+ * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
+ * handlers respectively.
+ *
+ * If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
+ * value of the actual command execution is replied to the user application.
+ *
+ * If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP
+ * is used for carry the message while IWL_TM_ATTR_COMMAND must set to
+ * IWL_TM_CMD_DEV2APP_SYNC_RSP.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+ struct iwl_priv *priv = hw->priv;
+ struct sk_buff *skb;
+ unsigned char *rsp_data_ptr = NULL;
+ int status = 0, rsp_data_len = 0;
+
+ switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+ case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
+ rsp_data_ptr = (unsigned char *)priv->cfg->name;
+ rsp_data_len = strlen(priv->cfg->name);
+ skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
+ rsp_data_len + 20);
+ if (!skb) {
+ IWL_DEBUG_INFO(priv,
+ "Error allocating memory\n");
+ return -ENOMEM;
+ }
+ NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND,
+ IWL_TM_CMD_DEV2APP_SYNC_RSP);
+ NLA_PUT(skb, IWL_TM_ATTR_SYNC_RSP,
+ rsp_data_len, rsp_data_ptr);
+ status = cfg80211_testmode_reply(skb);
+ if (status < 0)
+ IWL_DEBUG_INFO(priv, "Error sending msg : %d\n",
+ status);
+ break;
+
+ case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
+ status = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_init,
+ UCODE_SUBTYPE_INIT, -1);
+ if (status)
+ IWL_DEBUG_INFO(priv,
+ "Error loading init ucode: %d\n", status);
+ break;
+
+ case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
+ iwl_testmode_cfg_init_calib(priv);
+ iwlagn_stop_device(priv);
+ break;
+
+ case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
+ status = iwlagn_load_ucode_wait_alive(priv,
+ &priv->ucode_rt,
+ UCODE_SUBTYPE_REGULAR,
+ UCODE_SUBTYPE_REGULAR_NEW);
+ if (status) {
+ IWL_DEBUG_INFO(priv,
+ "Error loading runtime ucode: %d\n", status);
+ break;
+ }
+ status = iwl_alive_start(priv);
+ if (status)
+ IWL_DEBUG_INFO(priv,
+ "Error starting the device: %d\n", status);
+ break;
+
+ default:
+ IWL_DEBUG_INFO(priv, "Unknown testmode driver command ID\n");
+ return -ENOSYS;
+ }
+ return status;
+
+nla_put_failure:
+ kfree_skb(skb);
+ return -EMSGSIZE;
+}
+
+/* The testmode gnl message handler that takes the gnl message from the
+ * user space and parses it per the policy iwl_testmode_gnl_msg_policy, then
+ * invoke the corresponding handlers.
+ *
+ * This function is invoked when there is user space application sending
+ * gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated
+ * by nl80211.
+ *
+ * It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before
+ * dispatching it to the corresponding handler.
+ *
+ * If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application;
+ * -ENOSYS is replied to the user application if the command is unknown;
+ * Otherwise, the command is dispatched to the respective handler.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @data: pointer to user space message
+ * @len: length in byte of @data
+ */
+int iwl_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+ struct nlattr *tb[IWL_TM_ATTR_MAX - 1];
+ struct iwl_priv *priv = hw->priv;
+ int result;
+
+ result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len,
+ iwl_testmode_gnl_msg_policy);
+ if (result != 0) {
+ IWL_DEBUG_INFO(priv,
+ "Error parsing the gnl message : %d\n", result);
+ return result;
+ }
+
+ /* IWL_TM_ATTR_COMMAND is absolutely mandatory */
+ if (!tb[IWL_TM_ATTR_COMMAND]) {
+ IWL_DEBUG_INFO(priv, "Error finding testmode command type\n");
+ return -ENOMSG;
+ }
+ /* in case multiple accesses to the device happens */
+ mutex_lock(&priv->mutex);
+
+ switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+ case IWL_TM_CMD_APP2DEV_UCODE:
+ IWL_DEBUG_INFO(priv, "testmode cmd to uCode\n");
+ result = iwl_testmode_ucode(hw, tb);
+ break;
+ case IWL_TM_CMD_APP2DEV_REG_READ32:
+ case IWL_TM_CMD_APP2DEV_REG_WRITE32:
+ case IWL_TM_CMD_APP2DEV_REG_WRITE8:
+ IWL_DEBUG_INFO(priv, "testmode cmd to register\n");
+ result = iwl_testmode_reg(hw, tb);
+ break;
+ case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
+ case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
+ case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
+ case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
+ IWL_DEBUG_INFO(priv, "testmode cmd to driver\n");
+ result = iwl_testmode_driver(hw, tb);
+ break;
+ default:
+ IWL_DEBUG_INFO(priv, "Unknown testmode command\n");
+ result = -ENOSYS;
+ break;
+ }
+
+ mutex_unlock(&priv->mutex);
+ return result;
+}
diff --git a/drivers/net/wireless/iwlwifi/iwl-testmode.h b/drivers/net/wireless/iwlwifi/iwl-testmode.h
new file mode 100644
index 0000000..31f8949
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-testmode.h
@@ -0,0 +1,151 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __IWL_TESTMODE_H__
+#define __IWL_TESTMODE_H__
+
+#include <linux/types.h>
+
+
+/* Commands from user space to kernel space(IWL_TM_CMD_ID_APP2DEV_XX) and
+ * from and kernel space to user space(IWL_TM_CMD_ID_DEV2APP_XX).
+ * The command ID is carried with IWL_TM_ATTR_COMMAND. There are three types of
+ * of command from user space and two types of command from kernel space.
+ * See below.
+ */
+enum iwl_tm_cmd_t {
+ /* commands from user application to the uCode,
+ * the actual uCode host command ID is carried with
+ * IWL_TM_ATTR_UCODE_CMD_ID */
+ IWL_TM_CMD_APP2DEV_UCODE = 1,
+
+ /* commands from user applicaiton to access register */
+ IWL_TM_CMD_APP2DEV_REG_READ32,
+ IWL_TM_CMD_APP2DEV_REG_WRITE32,
+ IWL_TM_CMD_APP2DEV_REG_WRITE8,
+
+ /* commands fom user space for pure driver level operations */
+ IWL_TM_CMD_APP2DEV_GET_DEVICENAME,
+ IWL_TM_CMD_APP2DEV_LOAD_INIT_FW,
+ IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB,
+ IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW,
+ /* if there is other new command for the driver layer operation,
+ * append them here */
+
+
+ /* commands from kernel space to carry the synchronous response
+ * to user application */
+ IWL_TM_CMD_DEV2APP_SYNC_RSP,
+
+ /* commands from kernel space to multicast the spontaneous messages
+ * to user application */
+ IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
+ IWL_TM_CMD_MAX,
+};
+
+enum iwl_tm_attr_t {
+ IWL_TM_ATTR_NOT_APPLICABLE = 0,
+
+ /* From user space to kernel space:
+ * the command either destines to ucode, driver, or register;
+ * See enum iwl_tm_cmd_t.
+ *
+ * From kernel space to user space:
+ * the command either carries synchronous response,
+ * or the spontaneous message multicast from the device;
+ * See enum iwl_tm_cmd_t. */
+ IWL_TM_ATTR_COMMAND,
+
+ /* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE,
+ * The mandatory fields are :
+ * IWL_TM_ATTR_UCODE_CMD_ID for recognizable command ID;
+ * IWL_TM_ATTR_COMMAND_FLAG for the flags of the commands;
+ * The optional fields are:
+ * IWL_TM_ATTR_UCODE_CMD_DATA for the actual command payload
+ * to the ucode */
+ IWL_TM_ATTR_UCODE_CMD_ID,
+ IWL_TM_ATTR_UCODE_CMD_DATA,
+
+ /* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_XXX,
+ * The mandatory fields are:
+ * IWL_TM_ATTR_REG_OFFSET for the offset of the target register;
+ * IWL_TM_ATTR_REG_VALUE8 or IWL_TM_ATTR_REG_VALUE32 for value */
+ IWL_TM_ATTR_REG_OFFSET,
+ IWL_TM_ATTR_REG_VALUE8,
+ IWL_TM_ATTR_REG_VALUE32,
+
+ /* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_SYNC_RSP,
+ * The mandatory fields are:
+ * IWL_TM_ATTR_SYNC_RSP for the data content responding to the user
+ * application command */
+ IWL_TM_ATTR_SYNC_RSP,
+ /* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
+ * The mandatory fields are:
+ * IWL_TM_ATTR_UCODE_RX_PKT for the data content multicast to the user
+ * application */
+ IWL_TM_ATTR_UCODE_RX_PKT,
+
+ IWL_TM_ATTR_MAX,
+};
+
+
+#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 277c917..e69597e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
@@ -149,32 +149,31 @@
struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
struct iwl_queue *q = &txq->q;
int i;
- bool huge = false;
if (q->n_bd == 0)
return;
while (q->read_ptr != q->write_ptr) {
- /* we have no way to tell if it is a huge cmd ATM */
i = get_cmd_index(q, q->read_ptr, 0);
- if (txq->meta[i].flags & CMD_SIZE_HUGE)
- huge = true;
- else
+ if (txq->meta[i].flags & CMD_MAPPED) {
pci_unmap_single(priv->pci_dev,
dma_unmap_addr(&txq->meta[i], mapping),
dma_unmap_len(&txq->meta[i], len),
PCI_DMA_BIDIRECTIONAL);
+ txq->meta[i].flags = 0;
+ }
- q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
+ q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
}
- if (huge) {
- i = q->n_window;
+ i = q->n_window;
+ if (txq->meta[i].flags & CMD_MAPPED) {
pci_unmap_single(priv->pci_dev,
dma_unmap_addr(&txq->meta[i], mapping),
dma_unmap_len(&txq->meta[i], len),
PCI_DMA_BIDIRECTIONAL);
+ txq->meta[i].flags = 0;
}
}
@@ -233,7 +232,6 @@
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
- * See more detailed info in iwl-4965-hw.h.
***************************************************/
int iwl_queue_space(const struct iwl_queue *q)
@@ -265,11 +263,13 @@
/* count must be power-of-two size, otherwise iwl_queue_inc_wrap
* and iwl_queue_dec_wrap are broken. */
- BUG_ON(!is_power_of_2(count));
+ if (WARN_ON(!is_power_of_2(count)))
+ return -EINVAL;
/* slots_num must be power-of-two size, otherwise
* get_cmd_index is broken. */
- BUG_ON(!is_power_of_2(slots_num));
+ if (WARN_ON(!is_power_of_2(slots_num)))
+ return -EINVAL;
q->low_mark = q->n_window / 4;
if (q->low_mark < 4)
@@ -386,7 +386,9 @@
BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
/* Initialize queue's high/low-water marks, and head/tail indexes */
- iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+ ret = iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+ if (ret)
+ return ret;
/* Tell device where to find queue */
priv->cfg->ops->lib->txq_init(priv, txq);
@@ -440,22 +442,25 @@
struct iwl_cmd_meta *out_meta;
dma_addr_t phys_addr;
unsigned long flags;
- int len;
u32 idx;
u16 fix_size;
bool is_ct_kill = false;
- cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
- /* If any of the command structures end up being larger than
+ /*
+ * If any of the command structures end up being larger than
* the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
* we will need to increase the size of the TFD entries
* Also, check to see if command buffer should not exceed the size
- * of device_cmd and max_cmd_size. */
- BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
- !(cmd->flags & CMD_SIZE_HUGE));
- BUG_ON(fix_size > IWL_MAX_CMD_SIZE);
+ * of device_cmd and max_cmd_size.
+ */
+ if (WARN_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
+ !(cmd->flags & CMD_SIZE_HUGE)))
+ return -EINVAL;
+
+ if (WARN_ON(fix_size > IWL_MAX_CMD_SIZE))
+ return -EINVAL;
if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
IWL_WARN(priv, "Not sending command - %s KILL\n",
@@ -463,35 +468,38 @@
return -EIO;
}
- if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
- IWL_ERR(priv, "No space in command queue\n");
- if (priv->cfg->ops->lib->tt_ops.ct_kill_check) {
- is_ct_kill =
- priv->cfg->ops->lib->tt_ops.ct_kill_check(priv);
- }
- if (!is_ct_kill) {
- IWL_ERR(priv, "Restarting adapter due to queue full\n");
- queue_work(priv->workqueue, &priv->restart);
- }
- return -ENOSPC;
- }
+ /*
+ * As we only have a single huge buffer, check that the command
+ * is synchronous (otherwise buffers could end up being reused).
+ */
+
+ if (WARN_ON((cmd->flags & CMD_ASYNC) && (cmd->flags & CMD_SIZE_HUGE)))
+ return -EINVAL;
spin_lock_irqsave(&priv->hcmd_lock, flags);
- /* If this is a huge cmd, mark the huge flag also on the meta.flags
- * of the _original_ cmd. This is used for DMA mapping clean up.
- */
- if (cmd->flags & CMD_SIZE_HUGE) {
- idx = get_cmd_index(q, q->write_ptr, 0);
- txq->meta[idx].flags = CMD_SIZE_HUGE;
+ if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
+
+ IWL_ERR(priv, "No space in command queue\n");
+ is_ct_kill = iwl_check_for_ct_kill(priv);
+ if (!is_ct_kill) {
+ IWL_ERR(priv, "Restarting adapter due to queue full\n");
+ iwlagn_fw_error(priv, false);
+ }
+ return -ENOSPC;
}
idx = get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
out_cmd = txq->cmd[idx];
out_meta = &txq->meta[idx];
+ if (WARN_ON(out_meta->flags & CMD_MAPPED)) {
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
+ return -ENOSPC;
+ }
+
memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */
- out_meta->flags = cmd->flags;
if (cmd->flags & CMD_WANT_SKB)
out_meta->source = cmd;
if (cmd->flags & CMD_ASYNC)
@@ -508,9 +516,6 @@
INDEX_TO_SEQ(q->write_ptr));
if (cmd->flags & CMD_SIZE_HUGE)
out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
- len = sizeof(struct iwl_device_cmd);
- if (idx == TFD_CMD_SLOTS)
- len = IWL_MAX_CMD_SIZE;
#ifdef CONFIG_IWLWIFI_DEBUG
switch (out_cmd->hdr.cmd) {
@@ -532,17 +537,20 @@
q->write_ptr, idx, priv->cmd_queue);
}
#endif
- txq->need_update = 1;
-
- if (priv->cfg->ops->lib->txq_update_byte_cnt_tbl)
- /* Set up entry in queue's byte count circular buffer */
- priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
-
phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
fix_size, PCI_DMA_BIDIRECTIONAL);
+ if (unlikely(pci_dma_mapping_error(priv->pci_dev, phys_addr))) {
+ idx = -ENOMEM;
+ goto out;
+ }
+
dma_unmap_addr_set(out_meta, mapping, phys_addr);
dma_unmap_len_set(out_meta, len, fix_size);
+ out_meta->flags = cmd->flags | CMD_MAPPED;
+
+ txq->need_update = 1;
+
trace_iwlwifi_dev_hcmd(priv, &out_cmd->hdr, fix_size, cmd->flags);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
@@ -553,6 +561,7 @@
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
iwl_txq_update_write_ptr(priv, txq);
+ out:
spin_unlock_irqrestore(&priv->hcmd_lock, flags);
return idx;
}
@@ -584,7 +593,7 @@
if (nfreed++ > 0) {
IWL_ERR(priv, "HCMD skipped: index (%d) %d %d\n", idx,
q->write_ptr, q->read_ptr);
- queue_work(priv->workqueue, &priv->restart);
+ iwlagn_fw_error(priv, false);
}
}
@@ -609,6 +618,7 @@
struct iwl_device_cmd *cmd;
struct iwl_cmd_meta *meta;
struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
+ unsigned long flags;
/* If a Tx command is being handled and it isn't in the actual
* command queue then there a command routing bug has been introduced
@@ -622,14 +632,6 @@
return;
}
- /* If this is a huge cmd, clear the huge flag on the meta.flags
- * of the _original_ cmd. So that iwl_cmd_queue_free won't unmap
- * the DMA buffer for the scan (huge) command.
- */
- if (huge) {
- cmd_index = get_cmd_index(&txq->q, index, 0);
- txq->meta[cmd_index].flags = 0;
- }
cmd_index = get_cmd_index(&txq->q, index, huge);
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
@@ -646,6 +648,8 @@
} else if (meta->callback)
meta->callback(priv, cmd, pkt);
+ spin_lock_irqsave(&priv->hcmd_lock, flags);
+
iwl_hcmd_queue_reclaim(priv, txq_id, index, cmd_index);
if (!(meta->flags & CMD_ASYNC)) {
@@ -654,5 +658,9 @@
get_cmd_string(cmd->hdr.cmd));
wake_up_interruptible(&priv->wait_command_queue);
}
+
+ /* Mark as unmapped */
meta->flags = 0;
+
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
}
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 9a57cf6..5665a1a 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1576,7 +1576,8 @@
IWM_HEXDUMP(iwm, DBG, RX, "A-MSDU: ", skb->data, skb->len);
__skb_queue_head_init(&list);
- ieee80211_amsdu_to_8023s(skb, &list, ndev->dev_addr, wdev->iftype, 0);
+ ieee80211_amsdu_to_8023s(skb, &list, ndev->dev_addr, wdev->iftype, 0,
+ true);
while ((frame = __skb_dequeue(&list))) {
ndev->stats.rx_packets++;
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 5caa2ac..5d637af 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -6,6 +6,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/slab.h>
@@ -122,8 +124,10 @@
}
-/* Various firmware commands need the list of supported rates, but with
- the hight-bit set for basic rates */
+/*
+ * Various firmware commands need the list of supported rates, but with
+ * the hight-bit set for basic rates
+ */
static int lbs_add_rates(u8 *rates)
{
size_t i;
@@ -425,7 +429,7 @@
return ie_len + 2;
}
-/***************************************************************************
+/*
* Set Channel
*/
@@ -452,7 +456,7 @@
-/***************************************************************************
+/*
* Scanning
*/
@@ -538,8 +542,10 @@
goto done;
}
- /* Validity check: the TLV holds TSF values with 8 bytes each, so
- * the size in the TLV must match the nr_sets value */
+ /*
+ * Validity check: the TLV holds TSF values with 8 bytes each, so
+ * the size in the TLV must match the nr_sets value
+ */
i = get_unaligned_le16(tsfdesc);
tsfdesc += 2;
if (i / 8 != scanresp->nr_sets) {
@@ -581,8 +587,10 @@
/* To find out the channel, we must parse the IEs */
ie = pos;
- /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
- interval, capabilities */
+ /*
+ * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon
+ * interval, capabilities
+ */
ielen = left = len - (6 + 1 + 8 + 2 + 2);
while (left >= 2) {
u8 id, elen;
@@ -790,7 +798,7 @@
-/***************************************************************************
+/*
* Events
*/
@@ -825,7 +833,7 @@
-/***************************************************************************
+/*
* Connect/disconnect
*/
@@ -950,8 +958,10 @@
* Set WPA/WPA key material
*/
-/* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
- * get rid of WEXT, this should go into host.h */
+/*
+ * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we
+ * get rid of WEXT, this should go into host.h
+ */
struct cmd_key_material {
struct cmd_header hdr;
@@ -1314,8 +1324,8 @@
sme->ssid, sme->ssid_len,
WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
if (!bss) {
- lbs_pr_err("assoc: bss %pM not in scan results\n",
- sme->bssid);
+ wiphy_err(wiphy, "assoc: bss %pM not in scan results\n",
+ sme->bssid);
ret = -ENOENT;
goto done;
}
@@ -1372,8 +1382,8 @@
lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
break;
default:
- lbs_pr_err("unsupported cipher group 0x%x\n",
- sme->crypto.cipher_group);
+ wiphy_err(wiphy, "unsupported cipher group 0x%x\n",
+ sme->crypto.cipher_group);
ret = -ENOTSUPP;
goto done;
}
@@ -1491,7 +1501,7 @@
params->key, params->key_len);
break;
default:
- lbs_pr_err("unhandled cipher 0x%x\n", params->cipher);
+ wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher);
ret = -ENOTSUPP;
break;
}
@@ -1536,7 +1546,7 @@
}
-/***************************************************************************
+/*
* Get station
*/
@@ -1581,7 +1591,7 @@
-/***************************************************************************
+/*
* "Site survey", here just current channel and noise level
*/
@@ -1614,7 +1624,7 @@
-/***************************************************************************
+/*
* Change interface
*/
@@ -1656,11 +1666,12 @@
-/***************************************************************************
+/*
* IBSS (Ad-Hoc)
*/
-/* The firmware needs the following bits masked out of the beacon-derived
+/*
+ * The firmware needs the following bits masked out of the beacon-derived
* capability field when associating/joining to a BSS:
* 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
*/
@@ -1999,7 +2010,7 @@
-/***************************************************************************
+/*
* Initialization
*/
@@ -2118,13 +2129,13 @@
ret = wiphy_register(wdev->wiphy);
if (ret < 0)
- lbs_pr_err("cannot register wiphy device\n");
+ pr_err("cannot register wiphy device\n");
priv->wiphy_registered = true;
ret = register_netdev(priv->dev);
if (ret)
- lbs_pr_err("cannot register network device\n");
+ pr_err("cannot register network device\n");
INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 7e8a658..84566db 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1,7 +1,7 @@
-/**
- * This file contains the handling of command.
- * It prepares command and sends it to firmware when it is ready.
- */
+/*
+ * This file contains the handling of command.
+ * It prepares command and sends it to firmware when it is ready.
+ */
#include <linux/kfifo.h>
#include <linux/sched.h>
@@ -16,14 +16,14 @@
#define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf)))
/**
- * @brief Simple callback that copies response back into command
+ * lbs_cmd_copyback - Simple callback that copies response back into command
*
- * @param priv A pointer to struct lbs_private structure
- * @param extra A pointer to the original command structure for which
- * 'resp' is a response
- * @param resp A pointer to the command response
+ * @priv: A pointer to &struct lbs_private structure
+ * @extra: A pointer to the original command structure for which
+ * 'resp' is a response
+ * @resp: A pointer to the command response
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp)
@@ -38,15 +38,15 @@
EXPORT_SYMBOL_GPL(lbs_cmd_copyback);
/**
- * @brief Simple callback that ignores the result. Use this if
- * you just want to send a command to the hardware, but don't
+ * lbs_cmd_async_callback - Simple callback that ignores the result.
+ * Use this if you just want to send a command to the hardware, but don't
* care for the result.
*
- * @param priv ignored
- * @param extra ignored
- * @param resp ignored
+ * @priv: ignored
+ * @extra: ignored
+ * @resp: ignored
*
- * @return 0 for success
+ * returns: 0 for success
*/
static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp)
@@ -56,10 +56,11 @@
/**
- * @brief Checks whether a command is allowed in Power Save mode
+ * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode
*
- * @param command the command ID
- * @return 1 if allowed, 0 if not allowed
+ * @cmd: the command ID
+ *
+ * returns: 1 if allowed, 0 if not allowed
*/
static u8 is_command_allowed_in_ps(u16 cmd)
{
@@ -75,11 +76,12 @@
}
/**
- * @brief Updates the hardware details like MAC address and regulatory region
+ * lbs_update_hw_spec - Updates the hardware details like MAC address
+ * and regulatory region
*
- * @param priv A pointer to struct lbs_private structure
+ * @priv: A pointer to &struct lbs_private structure
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_update_hw_spec(struct lbs_private *priv)
{
@@ -108,7 +110,7 @@
* CF card firmware 5.0.16p0: cap 0x00000303
* USB dongle firmware 5.110.17p2: cap 0x00000303
*/
- lbs_pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
+ netdev_info(priv->dev, "%pM, fw %u.%u.%up%u, cap 0x%08x\n",
cmd.permanentaddr,
priv->fwrelease >> 24 & 0xff,
priv->fwrelease >> 16 & 0xff,
@@ -139,7 +141,8 @@
/* if it's unidentified region code, use the default (USA) */
if (i >= MRVDRV_MAX_REGION_CODE) {
priv->regioncode = 0x10;
- lbs_pr_info("unidentified region code; using the default (USA)\n");
+ netdev_info(priv->dev,
+ "unidentified region code; using the default (USA)\n");
}
if (priv->current_addr[0] == 0xff)
@@ -209,7 +212,7 @@
(uint8_t *)&cmd_config.wol_conf,
sizeof(struct wol_config));
} else {
- lbs_pr_info("HOST_SLEEP_CFG failed %d\n", ret);
+ netdev_info(priv->dev, "HOST_SLEEP_CFG failed %d\n", ret);
}
return ret;
@@ -217,14 +220,14 @@
EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg);
/**
- * @brief Sets the Power Save mode
+ * lbs_set_ps_mode - Sets the Power Save mode
*
- * @param priv A pointer to struct lbs_private structure
- * @param cmd_action The Power Save operation (PS_MODE_ACTION_ENTER_PS or
+ * @priv: A pointer to &struct lbs_private structure
+ * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or
* PS_MODE_ACTION_EXIT_PS)
- * @param block Whether to block on a response or not
+ * @block: Whether to block on a response or not
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_ps_mode(struct lbs_private *priv, u16 cmd_action, bool block)
{
@@ -312,7 +315,7 @@
if (priv->is_deep_sleep) {
if (!wait_event_interruptible_timeout(priv->ds_awake_q,
!priv->is_deep_sleep, (10 * HZ))) {
- lbs_pr_err("ds_awake_q: timer expired\n");
+ netdev_err(priv->dev, "ds_awake_q: timer expired\n");
ret = -1;
}
}
@@ -337,7 +340,7 @@
netif_carrier_off(priv->dev);
}
} else {
- lbs_pr_err("deep sleep: already enabled\n");
+ netdev_err(priv->dev, "deep sleep: already enabled\n");
}
} else {
if (priv->is_deep_sleep) {
@@ -347,8 +350,8 @@
if (!ret) {
ret = lbs_wait_for_ds_awake(priv);
if (ret)
- lbs_pr_err("deep sleep: wakeup"
- "failed\n");
+ netdev_err(priv->dev,
+ "deep sleep: wakeup failed\n");
}
}
}
@@ -382,8 +385,9 @@
ret = lbs_host_sleep_cfg(priv, priv->wol_criteria,
(struct wol_config *)NULL);
if (ret) {
- lbs_pr_info("Host sleep configuration failed: "
- "%d\n", ret);
+ netdev_info(priv->dev,
+ "Host sleep configuration failed: %d\n",
+ ret);
return ret;
}
if (priv->psstate == PS_STATE_FULL_POWER) {
@@ -393,19 +397,21 @@
sizeof(cmd),
lbs_ret_host_sleep_activate, 0);
if (ret)
- lbs_pr_info("HOST_SLEEP_ACTIVATE "
- "failed: %d\n", ret);
+ netdev_info(priv->dev,
+ "HOST_SLEEP_ACTIVATE failed: %d\n",
+ ret);
}
if (!wait_event_interruptible_timeout(
priv->host_sleep_q,
priv->is_host_sleep_activated,
(10 * HZ))) {
- lbs_pr_err("host_sleep_q: timer expired\n");
+ netdev_err(priv->dev,
+ "host_sleep_q: timer expired\n");
ret = -1;
}
} else {
- lbs_pr_err("host sleep: already enabled\n");
+ netdev_err(priv->dev, "host sleep: already enabled\n");
}
} else {
if (priv->is_host_sleep_activated)
@@ -417,13 +423,13 @@
}
/**
- * @brief Set an SNMP MIB value
+ * lbs_set_snmp_mib - Set an SNMP MIB value
*
- * @param priv A pointer to struct lbs_private structure
- * @param oid The OID to set in the firmware
- * @param val Value to set the OID to
+ * @priv: A pointer to &struct lbs_private structure
+ * @oid: The OID to set in the firmware
+ * @val: Value to set the OID to
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val)
{
@@ -467,13 +473,13 @@
}
/**
- * @brief Get an SNMP MIB value
+ * lbs_get_snmp_mib - Get an SNMP MIB value
*
- * @param priv A pointer to struct lbs_private structure
- * @param oid The OID to retrieve from the firmware
- * @param out_val Location for the returned value
+ * @priv: A pointer to &struct lbs_private structure
+ * @oid: The OID to retrieve from the firmware
+ * @out_val: Location for the returned value
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val)
{
@@ -510,14 +516,14 @@
}
/**
- * @brief Get the min, max, and current TX power
+ * lbs_get_tx_power - Get the min, max, and current TX power
*
- * @param priv A pointer to struct lbs_private structure
- * @param curlevel Current power level in dBm
- * @param minlevel Minimum supported power level in dBm (optional)
- * @param maxlevel Maximum supported power level in dBm (optional)
+ * @priv: A pointer to &struct lbs_private structure
+ * @curlevel: Current power level in dBm
+ * @minlevel: Minimum supported power level in dBm (optional)
+ * @maxlevel: Maximum supported power level in dBm (optional)
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
s16 *maxlevel)
@@ -545,12 +551,12 @@
}
/**
- * @brief Set the TX power
+ * lbs_set_tx_power - Set the TX power
*
- * @param priv A pointer to struct lbs_private structure
- * @param dbm The desired power level in dBm
+ * @priv: A pointer to &struct lbs_private structure
+ * @dbm: The desired power level in dBm
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_tx_power(struct lbs_private *priv, s16 dbm)
{
@@ -573,12 +579,13 @@
}
/**
- * @brief Enable or disable monitor mode (only implemented on OLPC usb8388 FW)
+ * lbs_set_monitor_mode - Enable or disable monitor mode
+ * (only implemented on OLPC usb8388 FW)
*
- * @param priv A pointer to struct lbs_private structure
- * @param enable 1 to enable monitor mode, 0 to disable
+ * @priv: A pointer to &struct lbs_private structure
+ * @enable: 1 to enable monitor mode, 0 to disable
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_monitor_mode(struct lbs_private *priv, int enable)
{
@@ -604,11 +611,11 @@
}
/**
- * @brief Get the radio channel
+ * lbs_get_channel - Get the radio channel
*
- * @param priv A pointer to struct lbs_private structure
+ * @priv: A pointer to &struct lbs_private structure
*
- * @return The channel on success, error on failure
+ * returns: The channel on success, error on failure
*/
static int lbs_get_channel(struct lbs_private *priv)
{
@@ -650,12 +657,12 @@
}
/**
- * @brief Set the radio channel
+ * lbs_set_channel - Set the radio channel
*
- * @param priv A pointer to struct lbs_private structure
- * @param channel The desired channel, or 0 to clear a locked channel
+ * @priv: A pointer to &struct lbs_private structure
+ * @channel: The desired channel, or 0 to clear a locked channel
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_set_channel(struct lbs_private *priv, u8 channel)
{
@@ -686,12 +693,13 @@
}
/**
- * @brief Get current RSSI and noise floor
+ * lbs_get_rssi - Get current RSSI and noise floor
*
- * @param priv A pointer to struct lbs_private structure
- * @param rssi On successful return, signal level in mBm
+ * @priv: A pointer to &struct lbs_private structure
+ * @rssi: On successful return, signal level in mBm
+ * @nf: On successful return, Noise floor
*
- * @return The channel on success, error on failure
+ * returns: The channel on success, error on failure
*/
int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf)
{
@@ -719,13 +727,14 @@
}
/**
- * @brief Send regulatory and 802.11d domain information to the firmware
+ * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information
+ * to the firmware
*
- * @param priv pointer to struct lbs_private
- * @param request cfg80211 regulatory request structure
- * @param bands the device's supported bands and channels
+ * @priv: pointer to &struct lbs_private
+ * @request: cfg80211 regulatory request structure
+ * @bands: the device's supported bands and channels
*
- * @return 0 on success, error code on failure
+ * returns: 0 on success, error code on failure
*/
int lbs_set_11d_domain_info(struct lbs_private *priv,
struct regulatory_request *request,
@@ -842,15 +851,15 @@
}
/**
- * @brief Read a MAC, Baseband, or RF register
+ * lbs_get_reg - Read a MAC, Baseband, or RF register
*
- * @param priv pointer to struct lbs_private
- * @param cmd register command, one of CMD_MAC_REG_ACCESS,
- * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
- * @param offset byte offset of the register to get
- * @param value on success, the value of the register at 'offset'
+ * @priv: pointer to &struct lbs_private
+ * @reg: register command, one of CMD_MAC_REG_ACCESS,
+ * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
+ * @offset: byte offset of the register to get
+ * @value: on success, the value of the register at 'offset'
*
- * @return 0 on success, error code on failure
+ * returns: 0 on success, error code on failure
*/
int lbs_get_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 *value)
{
@@ -886,15 +895,15 @@
}
/**
- * @brief Write a MAC, Baseband, or RF register
+ * lbs_set_reg - Write a MAC, Baseband, or RF register
*
- * @param priv pointer to struct lbs_private
- * @param cmd register command, one of CMD_MAC_REG_ACCESS,
- * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
- * @param offset byte offset of the register to set
- * @param value the value to write to the register at 'offset'
+ * @priv: pointer to &struct lbs_private
+ * @reg: register command, one of CMD_MAC_REG_ACCESS,
+ * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
+ * @offset: byte offset of the register to set
+ * @value: the value to write to the register at 'offset'
*
- * @return 0 on success, error code on failure
+ * returns: 0 on success, error code on failure
*/
int lbs_set_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 value)
{
@@ -1002,7 +1011,8 @@
ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
if (ret) {
- lbs_pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
+ netdev_info(priv->dev, "DNLD_CMD: hw_host_to_card failed: %d\n",
+ ret);
/* Let the timer kick in and retry, and potentially reset
the whole thing if the condition persists */
timeo = HZ/4;
@@ -1023,7 +1033,7 @@
lbs_deb_leave(LBS_DEB_HOST);
}
-/**
+/*
* This function inserts command node to cmdfreeq
* after cleans it. Requires priv->driver_lock held.
*/
@@ -1125,11 +1135,12 @@
}
/**
- * @brief This function allocates the command buffer and link
- * it to command free queue.
+ * lbs_allocate_cmd_buffer - allocates the command buffer and links
+ * it to command free queue
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: 0 for success or -1 on error
*/
int lbs_allocate_cmd_buffer(struct lbs_private *priv)
{
@@ -1171,10 +1182,11 @@
}
/**
- * @brief This function frees the command buffer.
+ * lbs_free_cmd_buffer - free the command buffer
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: 0 for success
*/
int lbs_free_cmd_buffer(struct lbs_private *priv)
{
@@ -1211,11 +1223,13 @@
}
/**
- * @brief This function gets a free command node if available in
- * command free queue.
+ * lbs_get_free_cmd_node - gets a free command node if available in
+ * command free queue
*
- * @param priv A pointer to struct lbs_private structure
- * @return cmd_ctrl_node A pointer to cmd_ctrl_node structure or NULL
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: A pointer to &cmd_ctrl_node structure on success
+ * or %NULL on error
*/
static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv)
{
@@ -1245,12 +1259,12 @@
}
/**
- * @brief This function executes next command in command
- * pending queue. It will put firmware back to PS mode
- * if applicable.
+ * lbs_execute_next_command - execute next command in command
+ * pending queue. Will put firmware back to PS mode if applicable.
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: 0 on success or -1 on error
*/
int lbs_execute_next_command(struct lbs_private *priv)
{
@@ -1267,7 +1281,8 @@
spin_lock_irqsave(&priv->driver_lock, flags);
if (priv->cur_cmd) {
- lbs_pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
+ netdev_alert(priv->dev,
+ "EXEC_NEXT_CMD: already processing command!\n");
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
@@ -1339,8 +1354,8 @@
cpu_to_le16(PS_MODE_ACTION_EXIT_PS)) {
lbs_deb_host(
"EXEC_NEXT_CMD: ignore ENTER_PS cmd\n");
- list_del(&cmdnode->list);
spin_lock_irqsave(&priv->driver_lock, flags);
+ list_del(&cmdnode->list);
lbs_complete_command(priv, cmdnode, 0);
spin_unlock_irqrestore(&priv->driver_lock, flags);
@@ -1352,8 +1367,8 @@
(priv->psstate == PS_STATE_PRE_SLEEP)) {
lbs_deb_host(
"EXEC_NEXT_CMD: ignore EXIT_PS cmd in sleep\n");
- list_del(&cmdnode->list);
spin_lock_irqsave(&priv->driver_lock, flags);
+ list_del(&cmdnode->list);
lbs_complete_command(priv, cmdnode, 0);
spin_unlock_irqrestore(&priv->driver_lock, flags);
priv->needtowakeup = 1;
@@ -1366,7 +1381,9 @@
"EXEC_NEXT_CMD: sending EXIT_PS\n");
}
}
+ spin_lock_irqsave(&priv->driver_lock, flags);
list_del(&cmdnode->list);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
lbs_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n",
le16_to_cpu(cmd->command));
lbs_submit_command(priv, cmdnode);
@@ -1429,7 +1446,7 @@
ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
sizeof(confirm_sleep));
if (ret) {
- lbs_pr_alert("confirm_sleep failed\n");
+ netdev_alert(priv->dev, "confirm_sleep failed\n");
goto out;
}
@@ -1454,12 +1471,12 @@
}
/**
- * @brief This function checks condition and prepares to
- * send sleep confirm command to firmware if ok.
+ * lbs_ps_confirm_sleep - checks condition and prepares to
+ * send sleep confirm command to firmware if ok
*
- * @param priv A pointer to struct lbs_private structure
- * @param psmode Power Saving mode
- * @return n/a
+ * @priv: A pointer to &struct lbs_private structure
+ *
+ * returns: n/a
*/
void lbs_ps_confirm_sleep(struct lbs_private *priv)
{
@@ -1499,16 +1516,16 @@
/**
- * @brief Configures the transmission power control functionality.
+ * lbs_set_tpc_cfg - Configures the transmission power control functionality
*
- * @param priv A pointer to struct lbs_private structure
- * @param enable Transmission power control enable
- * @param p0 Power level when link quality is good (dBm).
- * @param p1 Power level when link quality is fair (dBm).
- * @param p2 Power level when link quality is poor (dBm).
- * @param usesnr Use Signal to Noise Ratio in TPC
+ * @priv: A pointer to &struct lbs_private structure
+ * @enable: Transmission power control enable
+ * @p0: Power level when link quality is good (dBm).
+ * @p1: Power level when link quality is fair (dBm).
+ * @p2: Power level when link quality is poor (dBm).
+ * @usesnr: Use Signal to Noise Ratio in TPC
*
- * @return 0 on success
+ * returns: 0 on success
*/
int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
int8_t p2, int usesnr)
@@ -1531,15 +1548,15 @@
}
/**
- * @brief Configures the power adaptation settings.
+ * lbs_set_power_adapt_cfg - Configures the power adaptation settings
*
- * @param priv A pointer to struct lbs_private structure
- * @param enable Power adaptation enable
- * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm).
- * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
- * @param p2 Power level for 48 and 54 Mbps (dBm).
+ * @priv: A pointer to &struct lbs_private structure
+ * @enable: Power adaptation enable
+ * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm).
+ * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
+ * @p2: Power level for 48 and 54 Mbps (dBm).
*
- * @return 0 on Success
+ * returns: 0 on Success
*/
int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
@@ -1655,7 +1672,7 @@
spin_lock_irqsave(&priv->driver_lock, flags);
ret = cmdnode->result;
if (ret)
- lbs_pr_info("PREP_CMD: command 0x%04x failed: %d\n",
+ netdev_info(priv->dev, "PREP_CMD: command 0x%04x failed: %d\n",
command, ret);
__lbs_cleanup_and_insert_cmd(priv, cmdnode);
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 5e95da9..207fc36 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -1,7 +1,8 @@
-/**
- * This file contains the handling of command
- * responses as well as events generated by firmware.
- */
+/*
+ * This file contains the handling of command
+ * responses as well as events generated by firmware.
+ */
+
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
@@ -12,12 +13,13 @@
#include "cmd.h"
/**
- * @brief This function handles disconnect event. it
- * reports disconnect to upper layer, clean tx/rx packets,
- * reset link state etc.
+ * lbs_mac_event_disconnected - handles disconnect event. It
+ * reports disconnect to upper layer, clean tx/rx packets,
+ * reset link state etc.
*
- * @param priv A pointer to struct lbs_private structure
- * @return n/a
+ * @priv: A pointer to struct lbs_private structure
+ *
+ * returns: n/a
*/
void lbs_mac_event_disconnected(struct lbs_private *priv)
{
@@ -84,15 +86,18 @@
lbs_deb_hex(LBS_DEB_CMD, "CMD_RESP", (void *) resp, len);
if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
- lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
- le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
+ netdev_info(priv->dev,
+ "Received CMD_RESP with invalid sequence %d (expected %d)\n",
+ le16_to_cpu(resp->seqnum),
+ le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
}
if (respcmd != CMD_RET(curcmd) &&
respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) {
- lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd);
+ netdev_info(priv->dev, "Invalid CMD_RESP %x to command %x!\n",
+ respcmd, curcmd);
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
@@ -101,7 +106,8 @@
if (resp->result == cpu_to_le16(0x0004)) {
/* 0x0004 means -EAGAIN. Drop the response, let it time out
and be resubmitted */
- lbs_pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
+ netdev_info(priv->dev,
+ "Firmware returns DEFER to command %x. Will let it time out...\n",
le16_to_cpu(resp->command));
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
@@ -313,28 +319,28 @@
lbs_deb_cmd("EVENT: ADHOC beacon lost\n");
break;
case MACREG_INT_CODE_RSSI_LOW:
- lbs_pr_alert("EVENT: rssi low\n");
+ netdev_alert(priv->dev, "EVENT: rssi low\n");
break;
case MACREG_INT_CODE_SNR_LOW:
- lbs_pr_alert("EVENT: snr low\n");
+ netdev_alert(priv->dev, "EVENT: snr low\n");
break;
case MACREG_INT_CODE_MAX_FAIL:
- lbs_pr_alert("EVENT: max fail\n");
+ netdev_alert(priv->dev, "EVENT: max fail\n");
break;
case MACREG_INT_CODE_RSSI_HIGH:
- lbs_pr_alert("EVENT: rssi high\n");
+ netdev_alert(priv->dev, "EVENT: rssi high\n");
break;
case MACREG_INT_CODE_SNR_HIGH:
- lbs_pr_alert("EVENT: snr high\n");
+ netdev_alert(priv->dev, "EVENT: snr high\n");
break;
case MACREG_INT_CODE_MESH_AUTO_STARTED:
/* Ignore spurious autostart events */
- lbs_pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
+ netdev_info(priv->dev, "EVENT: MESH_AUTO_STARTED (ignoring)\n");
break;
default:
- lbs_pr_alert("EVENT: unknown event id %d\n", event);
+ netdev_alert(priv->dev, "EVENT: unknown event id %d\n", event);
break;
}
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index fbf3b033..23250f6 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -151,13 +151,14 @@
ret = lbs_set_host_sleep(priv, 0);
else if (host_sleep == 1) {
if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
- lbs_pr_info("wake parameters not configured");
+ netdev_info(priv->dev,
+ "wake parameters not configured\n");
ret = -EINVAL;
goto out_unlock;
}
ret = lbs_set_host_sleep(priv, 1);
} else {
- lbs_pr_err("invalid option\n");
+ netdev_err(priv->dev, "invalid option\n");
ret = -EINVAL;
}
@@ -849,15 +850,14 @@
static int num_of_items = ARRAY_SIZE(items);
/**
- * @brief proc read function
+ * lbs_debugfs_read - proc read function
*
- * @param page pointer to buffer
- * @param s read data starting position
- * @param off offset
- * @param cnt counter
- * @param eof end of file flag
- * @param data data to output
- * @return number of output data
+ * @file: file to read
+ * @userbuf: pointer to buffer
+ * @count: number of bytes to read
+ * @ppos: read data starting position
+ *
+ * returns: amount of data read or negative error code
*/
static ssize_t lbs_debugfs_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
@@ -897,13 +897,14 @@
}
/**
- * @brief proc write function
+ * lbs_debugfs_write - proc write function
*
- * @param f file pointer
- * @param buf pointer to data buffer
- * @param cnt data number to write
- * @param data data to write
- * @return number of data
+ * @f: file pointer
+ * @buf: pointer to data buffer
+ * @cnt: data number to write
+ * @ppos: file position
+ *
+ * returns: amount of data written
*/
static ssize_t lbs_debugfs_write(struct file *f, const char __user *buf,
size_t cnt, loff_t *ppos)
@@ -966,11 +967,11 @@
};
/**
- * @brief create debug proc file
+ * lbs_debug_init - create debug proc file
*
- * @param priv pointer struct lbs_private
- * @param dev pointer net_device
- * @return N/A
+ * @priv: pointer to &struct lbs_private
+ *
+ * returns: N/A
*/
static void lbs_debug_init(struct lbs_private *priv)
{
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index 2ae752d..da0b05b 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -1,8 +1,8 @@
-/**
- * This file contains declaration referring to
- * functions defined in other source files
- */
+/*
+ * This file contains declaration referring to
+ * functions defined in other source files
+ */
#ifndef _LBS_DECL_H_
#define _LBS_DECL_H_
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index d00c728..ab966f0 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -1,7 +1,7 @@
-/**
- * This header file contains global constant/enum definitions,
- * global variable declaration.
- */
+/*
+ * This header file contains global constant/enum definitions,
+ * global variable declaration.
+ */
#ifndef _LBS_DEFS_H_
#define _LBS_DEFS_H_
@@ -89,13 +89,6 @@
#define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
#define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
-#define lbs_pr_info(format, args...) \
- printk(KERN_INFO DRV_NAME": " format, ## args)
-#define lbs_pr_err(format, args...) \
- printk(KERN_ERR DRV_NAME": " format, ## args)
-#define lbs_pr_alert(format, args...) \
- printk(KERN_ALERT DRV_NAME": " format, ## args)
-
#ifdef DEBUG
static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
{
@@ -123,19 +116,19 @@
-/** Buffer Constants */
+/* Buffer Constants */
/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
-* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
-* driver has more local TxPDs. Each TxPD on the host memory is associated
-* with a Tx control node. The driver maintains 8 RxPD descriptors for
-* station firmware to store Rx packet information.
-*
-* Current version of MAC has a 32x6 multicast address buffer.
-*
-* 802.11b can have up to 14 channels, the driver keeps the
-* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
-*/
+ * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
+ * driver has more local TxPDs. Each TxPD on the host memory is associated
+ * with a Tx control node. The driver maintains 8 RxPD descriptors for
+ * station firmware to store Rx packet information.
+ *
+ * Current version of MAC has a 32x6 multicast address buffer.
+ *
+ * 802.11b can have up to 14 channels, the driver keeps the
+ * BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
+ */
#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
#define LBS_NUM_CMD_BUFFERS 10
@@ -166,7 +159,7 @@
#define WOL_RESULT_NOSPC_ERR 1
#define WOL_RESULT_EEXIST_ERR 2
-/** Misc constants */
+/* Misc constants */
/* This section defines 802.11 specific contants */
#define MRVDRV_MAX_BSS_DESCRIPTS 16
@@ -183,7 +176,8 @@
#define MARVELL_MESH_IE_LENGTH 9
-/* Values used to populate the struct mrvl_mesh_ie. The only time you need this
+/*
+ * Values used to populate the struct mrvl_mesh_ie. The only time you need this
* is when enabling the mesh using CMD_MESH_CONFIG.
*/
#define MARVELL_MESH_IE_TYPE 4
@@ -193,7 +187,7 @@
#define MARVELL_MESH_METRIC_ID 0
#define MARVELL_MESH_CAPABILITY 0
-/** INT status Bit Definition*/
+/* INT status Bit Definition */
#define MRVDRV_TX_DNLD_RDY 0x0001
#define MRVDRV_RX_UPLD_RDY 0x0002
#define MRVDRV_CMD_DNLD_RDY 0x0004
@@ -208,59 +202,63 @@
#define TPC_DEFAULT_P1 10
#define TPC_DEFAULT_P2 13
-/** TxPD status */
+/* TxPD status */
-/* Station firmware use TxPD status field to report final Tx transmit
-* result, Bit masks are used to present combined situations.
-*/
+/*
+ * Station firmware use TxPD status field to report final Tx transmit
+ * result, Bit masks are used to present combined situations.
+ */
#define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
#define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
-/** Tx mesh flag */
-/* Currently we are using normal WDS flag as mesh flag.
+/* Tx mesh flag */
+/*
+ * Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define TxPD_CONTROL_WDS_FRAME (1<<17)
#define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
-/** Mesh interface ID */
+/* Mesh interface ID */
#define MESH_IFACE_ID 0x0001
-/** Mesh id should be in bits 14-13-12 */
+/* Mesh id should be in bits 14-13-12 */
#define MESH_IFACE_BIT_OFFSET 0x000c
-/** Mesh enable bit in FW capability */
+/* Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
-/** FW definition from Marvell v4 */
+/* FW definition from Marvell v4 */
#define MRVL_FW_V4 (0x04)
-/** FW definition from Marvell v5 */
+/* FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
-/** FW definition from Marvell v10 */
+/* FW definition from Marvell v10 */
#define MRVL_FW_V10 (0x0a)
-/** FW major revision definition */
+/* FW major revision definition */
#define MRVL_FW_MAJOR_REV(x) ((x)>>24)
-/** RxPD status */
+/* RxPD status */
#define MRVDRV_RXPD_STATUS_OK 0x0001
-/** RxPD status - Received packet types */
-/** Rx mesh flag */
-/* Currently we are using normal WDS flag as mesh flag.
+/* RxPD status - Received packet types */
+/* Rx mesh flag */
+/*
+ * Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define RxPD_CONTROL_WDS_FRAME (0x40)
#define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
-/** RSSI-related defines */
-/* RSSI constants are used to implement 802.11 RSSI threshold
-* indication. if the Rx packet signal got too weak for 5 consecutive
-* times, miniport driver (driver) will report this event to wrapper
-*/
+/* RSSI-related defines */
+/*
+ * RSSI constants are used to implement 802.11 RSSI threshold
+ * indication. if the Rx packet signal got too weak for 5 consecutive
+ * times, miniport driver (driver) will report this event to wrapper
+ */
#define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
-/** RTS/FRAG related defines */
+/* RTS/FRAG related defines */
#define MRVDRV_RTS_MIN_VALUE 0
#define MRVDRV_RTS_MAX_VALUE 2347
#define MRVDRV_FRAG_MIN_VALUE 256
@@ -300,36 +298,36 @@
#define MAX_LEDS 8
-/** Global Variable Declaration */
+/* Global Variable Declaration */
extern const char lbs_driver_version[];
extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
-/** ENUM definition*/
-/** SNRNF_TYPE */
+/* ENUM definition */
+/* SNRNF_TYPE */
enum SNRNF_TYPE {
TYPE_BEACON = 0,
TYPE_RXPD,
MAX_TYPE_B
};
-/** SNRNF_DATA*/
+/* SNRNF_DATA */
enum SNRNF_DATA {
TYPE_NOAVG = 0,
TYPE_AVG,
MAX_TYPE_AVG
};
-/** LBS_802_11_POWER_MODE */
+/* LBS_802_11_POWER_MODE */
enum LBS_802_11_POWER_MODE {
LBS802_11POWERMODECAM,
LBS802_11POWERMODEMAX_PSP,
LBS802_11POWERMODEFAST_PSP,
- /*not a real mode, defined as an upper bound */
+ /* not a real mode, defined as an upper bound */
LBS802_11POWEMODEMAX
};
-/** PS_STATE */
+/* PS_STATE */
enum PS_STATE {
PS_STATE_FULL_POWER,
PS_STATE_AWAKE,
@@ -337,7 +335,7 @@
PS_STATE_SLEEP
};
-/** DNLD_STATE */
+/* DNLD_STATE */
enum DNLD_STATE {
DNLD_RES_RECEIVED,
DNLD_DATA_SENT,
@@ -345,19 +343,19 @@
DNLD_BOOTCMD_SENT,
};
-/** LBS_MEDIA_STATE */
+/* LBS_MEDIA_STATE */
enum LBS_MEDIA_STATE {
LBS_CONNECTED,
LBS_DISCONNECTED
};
-/** LBS_802_11_PRIVACY_FILTER */
+/* LBS_802_11_PRIVACY_FILTER */
enum LBS_802_11_PRIVACY_FILTER {
LBS802_11PRIVFILTERACCEPTALL,
LBS802_11PRIVFILTER8021XWEP
};
-/** mv_ms_type */
+/* mv_ms_type */
enum mv_ms_type {
MVMS_DAT = 0,
MVMS_CMD = 1,
@@ -365,14 +363,14 @@
MVMS_EVENT
};
-/** KEY_TYPE_ID */
+/* KEY_TYPE_ID */
enum KEY_TYPE_ID {
KEY_TYPE_ID_WEP = 0,
KEY_TYPE_ID_TKIP,
KEY_TYPE_ID_AES
};
-/** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
+/* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
enum KEY_INFO_WPA {
KEY_INFO_WPA_MCAST = 0x01,
KEY_INFO_WPA_UNICAST = 0x02,
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index bc461eb..76d018b 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -1,8 +1,8 @@
-/**
- * This file contains definitions and data structures specific
- * to Marvell 802.11 NIC. It contains the Device Information
- * structure struct lbs_private..
- */
+/*
+ * This file contains definitions and data structures specific
+ * to Marvell 802.11 NIC. It contains the Device Information
+ * structure struct lbs_private..
+ */
#ifndef _LBS_DEV_H_
#define _LBS_DEV_H_
@@ -12,7 +12,7 @@
#include <linux/kfifo.h>
-/** sleep_params */
+/* sleep_params */
struct sleep_params {
uint16_t sp_error;
uint16_t sp_offset;
@@ -23,7 +23,7 @@
};
-/** Private structure for the MV device */
+/* Private structure for the MV device */
struct lbs_private {
/* Basic networking */
@@ -125,12 +125,12 @@
/* Events sent from hardware to driver */
struct kfifo event_fifo;
- /** thread to service interrupts */
+ /* thread to service interrupts */
struct task_struct *main_thread;
wait_queue_head_t waitq;
struct workqueue_struct *work_thread;
- /** Encryption stuff */
+ /* Encryption stuff */
u8 authtype_auto;
u8 wep_tx_key;
u8 wep_key[4][WLAN_KEY_LEN_WEP104];
@@ -162,7 +162,7 @@
s16 txpower_min;
s16 txpower_max;
- /** Scanning */
+ /* Scanning */
struct delayed_work scan_work;
int scan_channel;
/* Queue of things waiting for scan completion */
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index 50193aa..29dbce4 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -20,7 +20,8 @@
strcpy(info->version, lbs_driver_version);
}
-/* All 8388 parts have 16KiB EEPROM size at the time of writing.
+/*
+ * All 8388 parts have 16KiB EEPROM size at the time of writing.
* In case that changes this needs fixing.
*/
#define LBS_EEPROM_LEN 16384
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index 6cb6935..2e2dbfa 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -1,7 +1,7 @@
-/**
- * This file function prototypes, data structure
- * and definitions for all the host/station commands
- */
+/*
+ * This file function prototypes, data structure
+ * and definitions for all the host/station commands
+ */
#ifndef _LBS_HOST_H_
#define _LBS_HOST_H_
@@ -13,9 +13,10 @@
#define CMD_OPTION_WAITFORRSP 0x0002
-/** Host command IDs */
+/* Host command IDs */
-/* Return command are almost always the same as the host command, but with
+/*
+ * Return command are almost always the same as the host command, but with
* bit 15 set high. There are a few exceptions, though...
*/
#define CMD_RET(cmd) (0x8000 | cmd)
@@ -251,7 +252,7 @@
CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
};
-/** Card Event definition */
+/* Card Event definition */
#define MACREG_INT_CODE_TX_PPA_FREE 0
#define MACREG_INT_CODE_TX_DMA_DONE 1
#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
@@ -624,12 +625,14 @@
struct cmd_ds_802_11_rssi {
struct cmd_header hdr;
- /* request: number of beacons (N) to average the SNR and NF over
+ /*
+ * request: number of beacons (N) to average the SNR and NF over
* response: SNR of most recent beacon
*/
__le16 n_or_snr;
- /* The following fields are only set in the response.
+ /*
+ * The following fields are only set in the response.
* In the request these are reserved and should be set to 0.
*/
__le16 nf; /* most recent beacon noise floor */
@@ -680,14 +683,16 @@
__le16 action;
- /* Interval for keepalive in PS mode:
+ /*
+ * Interval for keepalive in PS mode:
* 0x0000 = don't change
* 0x001E = firmware default
* 0xFFFF = disable
*/
__le16 nullpktinterval;
- /* Number of DTIM intervals to wake up for:
+ /*
+ * Number of DTIM intervals to wake up for:
* 0 = don't change
* 1 = firmware default
* 5 = max
@@ -697,7 +702,8 @@
__le16 reserved;
__le16 locallisteninterval;
- /* AdHoc awake period (FW v9+ only):
+ /*
+ * AdHoc awake period (FW v9+ only):
* 0 = don't change
* 1 = always awake (IEEE standard behavior)
* 2 - 31 = sleep for (n - 1) periods and awake for 1 period
@@ -771,7 +777,8 @@
__le16 capability;
u8 rates[MAX_RATES];
- /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+ /*
+ * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
* Adhoc join command and will cause a binary layout mismatch with
* the firmware
*/
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 8712cb2..63ed579 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -21,6 +21,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -312,7 +314,8 @@
#define CF8385_MANFID 0x02df
#define CF8385_CARDID 0x8103
-/* FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
+/*
+ * FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
* that gets fixed. Currently there's no way to access it from the probe hook.
*/
static inline u32 get_model(u16 manf_id, u16 card_id)
@@ -361,7 +364,7 @@
if (status & IF_CS_BIT_COMMAND)
break;
if (++loops > 100) {
- lbs_pr_err("card not ready for commands\n");
+ netdev_err(priv->dev, "card not ready for commands\n");
goto done;
}
mdelay(1);
@@ -431,14 +434,16 @@
/* is hardware ready? */
status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
if ((status & IF_CS_BIT_RESP) == 0) {
- lbs_pr_err("no cmd response in card\n");
+ netdev_err(priv->dev, "no cmd response in card\n");
*len = 0;
goto out;
}
*len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
- lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+ netdev_err(priv->dev,
+ "card cmd buffer has invalid # of bytes (%d)\n",
+ *len);
goto out;
}
@@ -472,7 +477,9 @@
len = if_cs_read16(priv->card, IF_CS_READ_LEN);
if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
- lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+ netdev_err(priv->dev,
+ "card data buffer has invalid # of bytes (%d)\n",
+ len);
priv->dev->stats.rx_dropped++;
goto dat_err;
}
@@ -621,8 +628,10 @@
if (remain < count)
count = remain;
- /* "write the number of bytes to be sent to the I/O Command
- * write length register" */
+ /*
+ * "write the number of bytes to be sent to the I/O Command
+ * write length register"
+ */
if_cs_write16(card, IF_CS_CMD_LEN, count);
/* "write this to I/O Command port register as 16 bit writes */
@@ -631,21 +640,27 @@
&fw->data[sent],
count >> 1);
- /* "Assert the download over interrupt command in the Host
- * status register" */
+ /*
+ * "Assert the download over interrupt command in the Host
+ * status register"
+ */
if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
- /* "Assert the download over interrupt command in the Card
- * interrupt case register" */
+ /*
+ * "Assert the download over interrupt command in the Card
+ * interrupt case register"
+ */
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
- /* "The host polls the Card Status register ... for 50 ms before
- declaring a failure */
+ /*
+ * "The host polls the Card Status register ... for 50 ms before
+ * declaring a failure"
+ */
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
- lbs_pr_err("can't download helper at 0x%x, ret %d\n",
- sent, ret);
+ pr_err("can't download helper at 0x%x, ret %d\n",
+ sent, ret);
goto done;
}
@@ -675,7 +690,7 @@
ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
IF_CS_SQ_HELPER_OK);
if (ret < 0) {
- lbs_pr_err("helper firmware doesn't answer\n");
+ pr_err("helper firmware doesn't answer\n");
goto done;
}
@@ -683,13 +698,13 @@
len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
if (len & 1) {
retry++;
- lbs_pr_info("odd, need to retry this firmware block\n");
+ pr_info("odd, need to retry this firmware block\n");
} else {
retry = 0;
}
if (retry > 20) {
- lbs_pr_err("could not download firmware\n");
+ pr_err("could not download firmware\n");
ret = -ENODEV;
goto done;
}
@@ -709,14 +724,14 @@
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
- lbs_pr_err("can't download firmware at 0x%x\n", sent);
+ pr_err("can't download firmware at 0x%x\n", sent);
goto done;
}
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
if (ret < 0)
- lbs_pr_err("firmware download failed\n");
+ pr_err("firmware download failed\n");
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
@@ -750,7 +765,8 @@
ret = if_cs_send_cmd(priv, buf, nb);
break;
default:
- lbs_pr_err("%s: unsupported type %d\n", __func__, type);
+ netdev_err(priv->dev, "%s: unsupported type %d\n",
+ __func__, type);
}
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
@@ -779,7 +795,7 @@
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
if (p_dev->resource[1]->end) {
- lbs_pr_err("wrong CIS (check number of IO windows)\n");
+ pr_err("wrong CIS (check number of IO windows)\n");
return -ENODEV;
}
@@ -800,7 +816,7 @@
card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
if (!card) {
- lbs_pr_err("error in kzalloc\n");
+ pr_err("error in kzalloc\n");
goto out;
}
card->p_dev = p_dev;
@@ -809,7 +825,7 @@
p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
- lbs_pr_err("error in pcmcia_loop_config\n");
+ pr_err("error in pcmcia_loop_config\n");
goto out1;
}
@@ -825,14 +841,14 @@
card->iobase = ioport_map(p_dev->resource[0]->start,
resource_size(p_dev->resource[0]));
if (!card->iobase) {
- lbs_pr_err("error in ioport_map\n");
+ pr_err("error in ioport_map\n");
ret = -EIO;
goto out1;
}
ret = pcmcia_enable_device(p_dev);
if (ret) {
- lbs_pr_err("error in pcmcia_enable_device\n");
+ pr_err("error in pcmcia_enable_device\n");
goto out2;
}
@@ -841,14 +857,14 @@
/*
* Most of the libertas cards can do unaligned register access, but some
- * weird ones can not. That's especially true for the CF8305 card.
+ * weird ones cannot. That's especially true for the CF8305 card.
*/
card->align_regs = 0;
card->model = get_model(p_dev->manf_id, p_dev->card_id);
if (card->model == MODEL_UNKNOWN) {
- lbs_pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
- p_dev->manf_id, p_dev->card_id);
+ pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
+ p_dev->manf_id, p_dev->card_id);
goto out2;
}
@@ -857,20 +873,20 @@
if (card->model == MODEL_8305) {
card->align_regs = 1;
if (prod_id < IF_CS_CF8305_B1_REV) {
- lbs_pr_err("8305 rev B0 and older are not supported\n");
+ pr_err("8305 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
}
if ((card->model == MODEL_8381) && prod_id < IF_CS_CF8381_B3_REV) {
- lbs_pr_err("8381 rev B2 and older are not supported\n");
+ pr_err("8381 rev B2 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
if ((card->model == MODEL_8385) && prod_id < IF_CS_CF8385_B1_REV) {
- lbs_pr_err("8385 rev B0 and older are not supported\n");
+ pr_err("8385 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
@@ -878,7 +894,7 @@
ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
&fw_table[0], &helper, &mainfw);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto out2;
}
@@ -909,18 +925,20 @@
ret = request_irq(p_dev->irq, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (ret) {
- lbs_pr_err("error in request_irq\n");
+ pr_err("error in request_irq\n");
goto out3;
}
- /* Clear any interrupt cause that happened while sending
- * firmware/initializing card */
+ /*
+ * Clear any interrupt cause that happened while sending
+ * firmware/initializing card
+ */
if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
if_cs_enable_ints(card);
/* And finally bring the card up */
if (lbs_start_card(priv) != 0) {
- lbs_pr_err("could not activate card\n");
+ pr_err("could not activate card\n");
goto out3;
}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index b4de0ca..a7b5cb0 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -26,6 +26,8 @@
* if_sdio_card_to_host() to pad the data.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
@@ -409,7 +411,7 @@
out:
if (ret)
- lbs_pr_err("problem fetching packet from firmware\n");
+ pr_err("problem fetching packet from firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -446,7 +448,7 @@
}
if (ret)
- lbs_pr_err("error %d sending packet to firmware\n", ret);
+ pr_err("error %d sending packet to firmware\n", ret);
sdio_release_host(card->func);
@@ -555,7 +557,7 @@
out:
if (ret)
- lbs_pr_err("failed to load helper firmware\n");
+ pr_err("failed to load helper firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
@@ -669,7 +671,7 @@
out:
if (ret)
- lbs_pr_err("failed to load firmware\n");
+ pr_err("failed to load firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
@@ -723,7 +725,7 @@
ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
card->model, &fw_table[0], &helper, &mainfw);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto out;
}
@@ -849,7 +851,7 @@
ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd);
if (ret)
- lbs_pr_err("DEEP_SLEEP cmd failed\n");
+ netdev_err(priv->dev, "DEEP_SLEEP cmd failed\n");
mdelay(200);
return ret;
@@ -865,7 +867,7 @@
sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
if (ret)
- lbs_pr_err("sdio_writeb failed!\n");
+ netdev_err(priv->dev, "sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -882,7 +884,7 @@
sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
if (ret)
- lbs_pr_err("sdio_writeb failed!\n");
+ netdev_err(priv->dev, "sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -961,7 +963,7 @@
}
if (i == func->card->num_info) {
- lbs_pr_err("unable to identify card model\n");
+ pr_err("unable to identify card model\n");
return -ENODEV;
}
@@ -995,7 +997,7 @@
break;
}
if (i == ARRAY_SIZE(fw_table)) {
- lbs_pr_err("unknown card model 0x%x\n", card->model);
+ pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
@@ -1101,7 +1103,7 @@
lbs_deb_sdio("send function INIT command\n");
if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd))
- lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
+ netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
}
ret = lbs_start_card(priv);
@@ -1163,7 +1165,7 @@
if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
&cmd, sizeof(cmd), lbs_cmd_copyback,
(unsigned long) &cmd))
- lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+ pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
}
@@ -1202,20 +1204,19 @@
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
- lbs_pr_info("%s: suspend: PM flags = 0x%x\n",
- sdio_func_id(func), flags);
+ dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
+ sdio_func_id(func), flags);
/* If we aren't being asked to wake on anything, we should bail out
* and let the SD stack power down the card.
*/
if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
- lbs_pr_info("Suspend without wake params -- "
- "powering down card.");
+ dev_info(dev, "Suspend without wake params -- powering down card\n");
return -ENOSYS;
}
if (!(flags & MMC_PM_KEEP_POWER)) {
- lbs_pr_err("%s: cannot remain alive while host is suspended\n",
+ dev_err(dev, "%s: cannot remain alive while host is suspended\n",
sdio_func_id(func));
return -ENOSYS;
}
@@ -1237,7 +1238,7 @@
struct if_sdio_card *card = sdio_get_drvdata(func);
int ret;
- lbs_pr_info("%s: resume: we're back\n", sdio_func_id(func));
+ dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
ret = lbs_resume(card->priv);
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index f6c2cd66..463352c 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -17,6 +17,8 @@
* (at your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
@@ -57,6 +59,7 @@
/* Handles all SPI communication (except for FW load) */
struct workqueue_struct *workqueue;
struct work_struct packet_work;
+ struct work_struct resume_work;
u8 cmd_buffer[IF_SPI_CMD_BUF_SIZE];
@@ -68,6 +71,9 @@
/* Protects cmd_packet_list and data_packet_list */
spinlock_t buffer_lock;
+
+ /* True is card suspended */
+ u8 suspended;
};
static void free_if_spi_card(struct if_spi_card *card)
@@ -139,8 +145,10 @@
card->prev_xfer_time = jiffies;
}
-/* Write out a byte buffer to an SPI register,
- * using a series of 16-bit transfers. */
+/*
+ * Write out a byte buffer to an SPI register,
+ * using a series of 16-bit transfers.
+ */
static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
{
int err = 0;
@@ -204,8 +212,10 @@
struct spi_transfer dummy_trans;
struct spi_transfer data_trans;
- /* You must take an even number of bytes from the SPU, even if you
- * don't care about the last one. */
+ /*
+ * You must take an even number of bytes from the SPU, even if you
+ * don't care about the last one.
+ */
BUG_ON(len & 0x1);
spu_transaction_init(card);
@@ -254,8 +264,10 @@
return ret;
}
-/* Read 32 bits from an SPI register.
- * The low 16 bits are read first. */
+/*
+ * Read 32 bits from an SPI register.
+ * The low 16 bits are read first.
+ */
static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
{
__le32 buf;
@@ -267,13 +279,15 @@
return err;
}
-/* Keep reading 16 bits from an SPI register until you get the correct result.
+/*
+ * Keep reading 16 bits from an SPI register until you get the correct result.
*
* If mask = 0, the correct result is any non-zero number.
* If mask != 0, the correct result is any number where
* number & target_mask == target
*
- * Returns -ETIMEDOUT if a second passes without the correct result. */
+ * Returns -ETIMEDOUT if a second passes without the correct result.
+ */
static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
u16 target_mask, u16 target)
{
@@ -293,16 +307,17 @@
}
udelay(100);
if (time_after(jiffies, timeout)) {
- lbs_pr_err("%s: timeout with val=%02x, "
- "target_mask=%02x, target=%02x\n",
+ pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
__func__, val, target_mask, target);
return -ETIMEDOUT;
}
}
}
-/* Read 16 bits from an SPI register until you receive a specific value.
- * Returns -ETIMEDOUT if a 4 tries pass without success. */
+/*
+ * Read 16 bits from an SPI register until you receive a specific value.
+ * Returns -ETIMEDOUT if a 4 tries pass without success.
+ */
static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target)
{
int err, try;
@@ -324,8 +339,10 @@
{
int err = 0;
- /* We can suppress a host interrupt by clearing the appropriate
- * bit in the "host interrupt status mask" register */
+ /*
+ * We can suppress a host interrupt by clearing the appropriate
+ * bit in the "host interrupt status mask" register
+ */
if (suppress_host_int) {
err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
if (err)
@@ -341,10 +358,12 @@
return err;
}
- /* If auto-interrupts are on, the completion of certain transactions
+ /*
+ * If auto-interrupts are on, the completion of certain transactions
* will trigger an interrupt automatically. If auto-interrupts
* are off, we need to set the "Card Interrupt Cause" register to
- * trigger a card interrupt. */
+ * trigger a card interrupt.
+ */
if (auto_int) {
err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG,
IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO |
@@ -387,7 +406,7 @@
if (err)
return err;
if ((rval & 0xF) != mode) {
- lbs_pr_err("Can't read bus mode register.\n");
+ pr_err("Can't read bus mode register\n");
return -EIO;
}
return 0;
@@ -398,8 +417,10 @@
int err = 0;
u32 delay;
- /* We have to start up in timed delay mode so that we can safely
- * read the Delay Read Register. */
+ /*
+ * We have to start up in timed delay mode so that we can safely
+ * read the Delay Read Register.
+ */
card->use_dummy_writes = 0;
err = spu_set_bus_mode(card,
IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
@@ -455,8 +476,10 @@
/* Load helper firmware image */
while (bytes_remaining > 0) {
- /* Scratch pad 1 should contain the number of bytes we
- * want to download to the firmware */
+ /*
+ * Scratch pad 1 should contain the number of bytes we
+ * want to download to the firmware
+ */
err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
HELPER_FW_LOAD_CHUNK_SZ);
if (err)
@@ -468,8 +491,10 @@
if (err)
goto out;
- /* Feed the data into the command read/write port reg
- * in chunks of 64 bytes */
+ /*
+ * Feed the data into the command read/write port reg
+ * in chunks of 64 bytes
+ */
memset(temp, 0, sizeof(temp));
memcpy(temp, fw,
min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ));
@@ -491,9 +516,11 @@
fw += HELPER_FW_LOAD_CHUNK_SZ;
}
- /* Once the helper / single stage firmware download is complete,
+ /*
+ * Once the helper / single stage firmware download is complete,
* write 0 to scratch pad 1 and interrupt the
- * bootloader. This completes the helper download. */
+ * bootloader. This completes the helper download.
+ */
err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
if (err)
goto out;
@@ -508,26 +535,30 @@
out:
if (err)
- lbs_pr_err("failed to load helper firmware (err=%d)\n", err);
+ pr_err("failed to load helper firmware (err=%d)\n", err);
lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
return err;
}
-/* Returns the length of the next packet the firmware expects us to send
- * Sets crc_err if the previous transfer had a CRC error. */
+/*
+ * Returns the length of the next packet the firmware expects us to send.
+ * Sets crc_err if the previous transfer had a CRC error.
+ */
static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
int *crc_err)
{
u16 len;
int err = 0;
- /* wait until the host interrupt status register indicates
- * that we are ready to download */
+ /*
+ * wait until the host interrupt status register indicates
+ * that we are ready to download
+ */
err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
IF_SPI_HIST_CMD_DOWNLOAD_RDY,
IF_SPI_HIST_CMD_DOWNLOAD_RDY);
if (err) {
- lbs_pr_err("timed out waiting for host_int_status\n");
+ pr_err("timed out waiting for host_int_status\n");
return err;
}
@@ -537,9 +568,8 @@
return err;
if (len > IF_SPI_CMD_BUF_SIZE) {
- lbs_pr_err("firmware load device requested a larger "
- "tranfer than we are prepared to "
- "handle. (len = %d)\n", len);
+ pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
+ len);
return -EIO;
}
if (len & 0x1) {
@@ -555,6 +585,7 @@
static int if_spi_prog_main_firmware(struct if_spi_card *card,
const struct firmware *firmware)
{
+ struct lbs_private *priv = card->priv;
int len, prev_len;
int bytes, crc_err = 0, err = 0;
const u8 *fw;
@@ -568,8 +599,9 @@
err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
if (err) {
- lbs_pr_err("%s: timed out waiting for initial "
- "scratch reg = 0\n", __func__);
+ netdev_err(priv->dev,
+ "%s: timed out waiting for initial scratch reg = 0\n",
+ __func__);
goto out;
}
@@ -583,17 +615,18 @@
goto out;
}
if (bytes < 0) {
- /* If there are no more bytes left, we would normally
- * expect to have terminated with len = 0 */
- lbs_pr_err("Firmware load wants more bytes "
- "than we have to offer.\n");
+ /*
+ * If there are no more bytes left, we would normally
+ * expect to have terminated with len = 0
+ */
+ netdev_err(priv->dev,
+ "Firmware load wants more bytes than we have to offer.\n");
break;
}
if (crc_err) {
/* Previous transfer failed. */
if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
- lbs_pr_err("Too many CRC errors encountered "
- "in firmware load.\n");
+ pr_err("Too many CRC errors encountered in firmware load.\n");
err = -EIO;
goto out;
}
@@ -622,21 +655,20 @@
prev_len = len;
}
if (bytes > prev_len) {
- lbs_pr_err("firmware load wants fewer bytes than "
- "we have to offer.\n");
+ pr_err("firmware load wants fewer bytes than we have to offer\n");
}
/* Confirm firmware download */
err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
SUCCESSFUL_FW_DOWNLOAD_MAGIC);
if (err) {
- lbs_pr_err("failed to confirm the firmware download\n");
+ pr_err("failed to confirm the firmware download\n");
goto out;
}
out:
if (err)
- lbs_pr_err("failed to load firmware (err=%d)\n", err);
+ pr_err("failed to load firmware (err=%d)\n", err);
lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
return err;
}
@@ -656,14 +688,18 @@
u16 len;
u8 i;
- /* We need a buffer big enough to handle whatever people send to
- * hw_host_to_card */
+ /*
+ * We need a buffer big enough to handle whatever people send to
+ * hw_host_to_card
+ */
BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE);
BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE);
- /* It's just annoying if the buffer size isn't a multiple of 4, because
- * then we might have len < IF_SPI_CMD_BUF_SIZE but
- * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE */
+ /*
+ * It's just annoying if the buffer size isn't a multiple of 4, because
+ * then we might have len < IF_SPI_CMD_BUF_SIZE but
+ * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE
+ */
BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0);
lbs_deb_enter(LBS_DEB_SPI);
@@ -673,13 +709,13 @@
if (err)
goto out;
if (!len) {
- lbs_pr_err("%s: error: card has no data for host\n",
+ netdev_err(priv->dev, "%s: error: card has no data for host\n",
__func__);
err = -EINVAL;
goto out;
} else if (len > IF_SPI_CMD_BUF_SIZE) {
- lbs_pr_err("%s: error: response packet too large: "
- "%d bytes, but maximum is %d\n",
+ netdev_err(priv->dev,
+ "%s: error: response packet too large: %d bytes, but maximum is %d\n",
__func__, len, IF_SPI_CMD_BUF_SIZE);
err = -EINVAL;
goto out;
@@ -701,7 +737,7 @@
out:
if (err)
- lbs_pr_err("%s: err=%d\n", __func__, err);
+ netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
lbs_deb_leave(LBS_DEB_SPI);
return err;
}
@@ -709,6 +745,7 @@
/* Move data from the card to the host */
static int if_spi_c2h_data(struct if_spi_card *card)
{
+ struct lbs_private *priv = card->priv;
struct sk_buff *skb;
char *data;
u16 len;
@@ -721,13 +758,13 @@
if (err)
goto out;
if (!len) {
- lbs_pr_err("%s: error: card has no data for host\n",
+ netdev_err(priv->dev, "%s: error: card has no data for host\n",
__func__);
err = -EINVAL;
goto out;
} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
- lbs_pr_err("%s: error: card has %d bytes of data, but "
- "our maximum skb size is %zu\n",
+ netdev_err(priv->dev,
+ "%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
__func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
err = -EINVAL;
goto out;
@@ -759,7 +796,7 @@
dev_kfree_skb(skb);
out:
if (err)
- lbs_pr_err("%s: err=%d\n", __func__, err);
+ netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
lbs_deb_leave(LBS_DEB_SPI);
return err;
}
@@ -768,6 +805,7 @@
static void if_spi_h2c(struct if_spi_card *card,
struct if_spi_packet *packet, int type)
{
+ struct lbs_private *priv = card->priv;
int err = 0;
u16 int_type, port_reg;
@@ -781,7 +819,8 @@
port_reg = IF_SPI_CMD_RDWRPORT_REG;
break;
default:
- lbs_pr_err("can't transfer buffer of type %d\n", type);
+ netdev_err(priv->dev, "can't transfer buffer of type %d\n",
+ type);
err = -EINVAL;
goto out;
}
@@ -795,7 +834,7 @@
kfree(packet);
if (err)
- lbs_pr_err("%s: error %d\n", __func__, err);
+ netdev_err(priv->dev, "%s: error %d\n", __func__, err);
}
/* Inform the host about a card event */
@@ -819,7 +858,7 @@
lbs_queue_event(priv, cause & 0xff);
out:
if (err)
- lbs_pr_err("%s: error %d\n", __func__, err);
+ netdev_err(priv->dev, "%s: error %d\n", __func__, err);
}
static void if_spi_host_to_card_worker(struct work_struct *work)
@@ -829,17 +868,21 @@
u16 hiStatus;
unsigned long flags;
struct if_spi_packet *packet;
+ struct lbs_private *priv;
card = container_of(work, struct if_spi_card, packet_work);
+ priv = card->priv;
lbs_deb_enter(LBS_DEB_SPI);
- /* Read the host interrupt status register to see what we
- * can do. */
+ /*
+ * Read the host interrupt status register to see what we
+ * can do.
+ */
err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
&hiStatus);
if (err) {
- lbs_pr_err("I/O error\n");
+ netdev_err(priv->dev, "I/O error\n");
goto err;
}
@@ -854,12 +897,15 @@
goto err;
}
- /* workaround: in PS mode, the card does not set the Command
- * Download Ready bit, but it sets TX Download Ready. */
+ /*
+ * workaround: in PS mode, the card does not set the Command
+ * Download Ready bit, but it sets TX Download Ready.
+ */
if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
(card->priv->psstate != PS_STATE_FULL_POWER &&
(hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
- /* This means two things. First of all,
+ /*
+ * This means two things. First of all,
* if there was a previous command sent, the card has
* successfully received it.
* Secondly, it is now ready to download another
@@ -867,8 +913,7 @@
*/
lbs_host_to_card_done(card->priv);
- /* Do we have any command packets from the host to
- * send? */
+ /* Do we have any command packets from the host to send? */
packet = NULL;
spin_lock_irqsave(&card->buffer_lock, flags);
if (!list_empty(&card->cmd_packet_list)) {
@@ -882,8 +927,7 @@
if_spi_h2c(card, packet, MVMS_CMD);
}
if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
- /* Do we have any data packets from the host to
- * send? */
+ /* Do we have any data packets from the host to send? */
packet = NULL;
spin_lock_irqsave(&card->buffer_lock, flags);
if (!list_empty(&card->data_packet_list)) {
@@ -901,7 +945,7 @@
err:
if (err)
- lbs_pr_err("%s: got error %d\n", __func__, err);
+ netdev_err(priv->dev, "%s: got error %d\n", __func__, err);
lbs_deb_leave(LBS_DEB_SPI);
}
@@ -910,7 +954,8 @@
* Host to Card
*
* Called from Libertas to transfer some data to the WLAN device
- * We can't sleep here. */
+ * We can't sleep here.
+ */
static int if_spi_host_to_card(struct lbs_private *priv,
u8 type, u8 *buf, u16 nb)
{
@@ -923,7 +968,8 @@
lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
if (nb == 0) {
- lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb);
+ netdev_err(priv->dev, "%s: invalid size requested: %d\n",
+ __func__, nb);
err = -EINVAL;
goto out;
}
@@ -951,7 +997,8 @@
spin_unlock_irqrestore(&card->buffer_lock, flags);
break;
default:
- lbs_pr_err("can't transfer buffer of type %d", type);
+ netdev_err(priv->dev, "can't transfer buffer of type %d\n",
+ type);
err = -EINVAL;
break;
}
@@ -984,6 +1031,7 @@
static int if_spi_init_card(struct if_spi_card *card)
{
+ struct lbs_private *priv = card->priv;
struct spi_device *spi = card->spi;
int err, i;
u32 scratch;
@@ -1012,8 +1060,8 @@
break;
}
if (i == ARRAY_SIZE(fw_table)) {
- lbs_pr_err("Unsupported chip_id: 0x%02x\n",
- card->card_id);
+ netdev_err(priv->dev, "Unsupported chip_id: 0x%02x\n",
+ card->card_id);
err = -ENODEV;
goto out;
}
@@ -1022,7 +1070,8 @@
card->card_id, &fw_table[0], &helper,
&mainfw);
if (err) {
- lbs_pr_err("failed to find firmware (%d)\n", err);
+ netdev_err(priv->dev, "failed to find firmware (%d)\n",
+ err);
goto out;
}
@@ -1057,6 +1106,28 @@
return err;
}
+static void if_spi_resume_worker(struct work_struct *work)
+{
+ struct if_spi_card *card;
+
+ card = container_of(work, struct if_spi_card, resume_work);
+
+ if (card->suspended) {
+ if (card->pdata->setup)
+ card->pdata->setup(card->spi);
+
+ /* Init card ... */
+ if_spi_init_card(card);
+
+ enable_irq(card->spi->irq);
+
+ /* And resume it ... */
+ lbs_resume(card->priv);
+
+ card->suspended = 0;
+ }
+}
+
static int __devinit if_spi_probe(struct spi_device *spi)
{
struct if_spi_card *card;
@@ -1099,14 +1170,17 @@
if (err)
goto free_card;
- /* Register our card with libertas.
- * This will call alloc_etherdev */
+ /*
+ * Register our card with libertas.
+ * This will call alloc_etherdev.
+ */
priv = lbs_add_card(card, &spi->dev);
if (!priv) {
err = -ENOMEM;
goto free_card;
}
card->priv = priv;
+ priv->setup_fw_on_resume = 1;
priv->card = card;
priv->hw_host_to_card = if_spi_host_to_card;
priv->enter_deep_sleep = NULL;
@@ -1117,17 +1191,20 @@
/* Initialize interrupt handling stuff. */
card->workqueue = create_workqueue("libertas_spi");
INIT_WORK(&card->packet_work, if_spi_host_to_card_worker);
+ INIT_WORK(&card->resume_work, if_spi_resume_worker);
err = request_irq(spi->irq, if_spi_host_interrupt,
IRQF_TRIGGER_FALLING, "libertas_spi", card);
if (err) {
- lbs_pr_err("can't get host irq line-- request_irq failed\n");
+ pr_err("can't get host irq line-- request_irq failed\n");
goto terminate_workqueue;
}
- /* Start the card.
+ /*
+ * Start the card.
* This will call register_netdev, and we'll start
- * getting interrupts... */
+ * getting interrupts...
+ */
err = lbs_start_card(priv);
if (err)
goto release_irq;
@@ -1161,6 +1238,8 @@
lbs_deb_spi("libertas_spi_remove\n");
lbs_deb_enter(LBS_DEB_SPI);
+ cancel_work_sync(&card->resume_work);
+
lbs_stop_card(priv);
lbs_remove_card(priv); /* will call free_netdev */
@@ -1174,6 +1253,40 @@
return 0;
}
+static int if_spi_suspend(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct if_spi_card *card = spi_get_drvdata(spi);
+
+ if (!card->suspended) {
+ lbs_suspend(card->priv);
+ flush_workqueue(card->workqueue);
+ disable_irq(spi->irq);
+
+ if (card->pdata->teardown)
+ card->pdata->teardown(spi);
+ card->suspended = 1;
+ }
+
+ return 0;
+}
+
+static int if_spi_resume(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct if_spi_card *card = spi_get_drvdata(spi);
+
+ /* Schedule delayed work */
+ schedule_work(&card->resume_work);
+
+ return 0;
+}
+
+static const struct dev_pm_ops if_spi_pm_ops = {
+ .suspend = if_spi_suspend,
+ .resume = if_spi_resume,
+};
+
static struct spi_driver libertas_spi_driver = {
.probe = if_spi_probe,
.remove = __devexit_p(libertas_spi_remove),
@@ -1181,6 +1294,7 @@
.name = "libertas_spi",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
+ .pm = &if_spi_pm_ops,
},
};
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index d2ac1dc..e450e31 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -86,34 +86,34 @@
#define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff)
/***************** IF_SPI_HOST_INT_CTRL_REG *****************/
-/** Host Interrupt Control bit : Wake up */
+/* Host Interrupt Control bit : Wake up */
#define IF_SPI_HICT_WAKE_UP (1<<0)
-/** Host Interrupt Control bit : WLAN ready */
+/* Host Interrupt Control bit : WLAN ready */
#define IF_SPI_HICT_WLAN_READY (1<<1)
/*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY (1<<2) */
/*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY (1<<3) */
/*#define IF_SPI_HICT_IRQSRC_WLAN (1<<4) */
-/** Host Interrupt Control bit : Tx auto download */
+/* Host Interrupt Control bit : Tx auto download */
#define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO (1<<5)
-/** Host Interrupt Control bit : Rx auto upload */
+/* Host Interrupt Control bit : Rx auto upload */
#define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO (1<<6)
-/** Host Interrupt Control bit : Command auto download */
+/* Host Interrupt Control bit : Command auto download */
#define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO (1<<7)
-/** Host Interrupt Control bit : Command auto upload */
+/* Host Interrupt Control bit : Command auto upload */
#define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO (1<<8)
/***************** IF_SPI_CARD_INT_CAUSE_REG *****************/
-/** Card Interrupt Case bit : Tx download over */
+/* Card Interrupt Case bit : Tx download over */
#define IF_SPI_CIC_TX_DOWNLOAD_OVER (1<<0)
-/** Card Interrupt Case bit : Rx upload over */
+/* Card Interrupt Case bit : Rx upload over */
#define IF_SPI_CIC_RX_UPLOAD_OVER (1<<1)
-/** Card Interrupt Case bit : Command download over */
+/* Card Interrupt Case bit : Command download over */
#define IF_SPI_CIC_CMD_DOWNLOAD_OVER (1<<2)
-/** Card Interrupt Case bit : Host event */
+/* Card Interrupt Case bit : Host event */
#define IF_SPI_CIC_HOST_EVENT (1<<3)
-/** Card Interrupt Case bit : Command upload over */
+/* Card Interrupt Case bit : Command upload over */
#define IF_SPI_CIC_CMD_UPLOAD_OVER (1<<4)
-/** Card Interrupt Case bit : Power down */
+/* Card Interrupt Case bit : Power down */
#define IF_SPI_CIC_POWER_DOWN (1<<5)
/***************** IF_SPI_CARD_INT_STATUS_REG *****************/
@@ -138,51 +138,51 @@
#define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW (1<<10)
/***************** IF_SPI_HOST_INT_STATUS_REG *****************/
-/** Host Interrupt Status bit : Tx download ready */
+/* Host Interrupt Status bit : Tx download ready */
#define IF_SPI_HIST_TX_DOWNLOAD_RDY (1<<0)
-/** Host Interrupt Status bit : Rx upload ready */
+/* Host Interrupt Status bit : Rx upload ready */
#define IF_SPI_HIST_RX_UPLOAD_RDY (1<<1)
-/** Host Interrupt Status bit : Command download ready */
+/* Host Interrupt Status bit : Command download ready */
#define IF_SPI_HIST_CMD_DOWNLOAD_RDY (1<<2)
-/** Host Interrupt Status bit : Card event */
+/* Host Interrupt Status bit : Card event */
#define IF_SPI_HIST_CARD_EVENT (1<<3)
-/** Host Interrupt Status bit : Command upload ready */
+/* Host Interrupt Status bit : Command upload ready */
#define IF_SPI_HIST_CMD_UPLOAD_RDY (1<<4)
-/** Host Interrupt Status bit : I/O write FIFO overflow */
+/* Host Interrupt Status bit : I/O write FIFO overflow */
#define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW (1<<5)
-/** Host Interrupt Status bit : I/O read FIFO underflow */
+/* Host Interrupt Status bit : I/O read FIFO underflow */
#define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW (1<<6)
-/** Host Interrupt Status bit : Data write FIFO overflow */
+/* Host Interrupt Status bit : Data write FIFO overflow */
#define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW (1<<7)
-/** Host Interrupt Status bit : Data read FIFO underflow */
+/* Host Interrupt Status bit : Data read FIFO underflow */
#define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW (1<<8)
-/** Host Interrupt Status bit : Command write FIFO overflow */
+/* Host Interrupt Status bit : Command write FIFO overflow */
#define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW (1<<9)
-/** Host Interrupt Status bit : Command read FIFO underflow */
+/* Host Interrupt Status bit : Command read FIFO underflow */
#define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW (1<<10)
/***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/
-/** Host Interrupt Status Mask bit : Tx download ready */
+/* Host Interrupt Status Mask bit : Tx download ready */
#define IF_SPI_HISM_TX_DOWNLOAD_RDY (1<<0)
-/** Host Interrupt Status Mask bit : Rx upload ready */
+/* Host Interrupt Status Mask bit : Rx upload ready */
#define IF_SPI_HISM_RX_UPLOAD_RDY (1<<1)
-/** Host Interrupt Status Mask bit : Command download ready */
+/* Host Interrupt Status Mask bit : Command download ready */
#define IF_SPI_HISM_CMD_DOWNLOAD_RDY (1<<2)
-/** Host Interrupt Status Mask bit : Card event */
+/* Host Interrupt Status Mask bit : Card event */
#define IF_SPI_HISM_CARDEVENT (1<<3)
-/** Host Interrupt Status Mask bit : Command upload ready */
+/* Host Interrupt Status Mask bit : Command upload ready */
#define IF_SPI_HISM_CMD_UPLOAD_RDY (1<<4)
-/** Host Interrupt Status Mask bit : I/O write FIFO overflow */
+/* Host Interrupt Status Mask bit : I/O write FIFO overflow */
#define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW (1<<5)
-/** Host Interrupt Status Mask bit : I/O read FIFO underflow */
+/* Host Interrupt Status Mask bit : I/O read FIFO underflow */
#define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW (1<<6)
-/** Host Interrupt Status Mask bit : Data write FIFO overflow */
+/* Host Interrupt Status Mask bit : Data write FIFO overflow */
#define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW (1<<7)
-/** Host Interrupt Status Mask bit : Data write FIFO underflow */
+/* Host Interrupt Status Mask bit : Data write FIFO underflow */
#define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW (1<<8)
-/** Host Interrupt Status Mask bit : Command write FIFO overflow */
+/* Host Interrupt Status Mask bit : Command write FIFO overflow */
#define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW (1<<9)
-/** Host Interrupt Status Mask bit : Command write FIFO underflow */
+/* Host Interrupt Status Mask bit : Command write FIFO underflow */
#define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW (1<<10)
/***************** IF_SPI_SPU_BUS_MODE_REG *****************/
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 6524c70..b5acc39 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -1,6 +1,9 @@
-/**
- * This file contains functions used in USB interface module.
- */
+/*
+ * This file contains functions used in USB interface module.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
@@ -66,7 +69,7 @@
/* sysfs hooks */
-/**
+/*
* Set function to write firmware to device's persistent memory
*/
static ssize_t if_usb_firmware_set(struct device *dev,
@@ -85,7 +88,7 @@
return ret;
}
-/**
+/*
* lbs_flash_fw attribute to be exported per ethX interface through sysfs
* (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
* the device's persistent memory:
@@ -94,7 +97,14 @@
static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
/**
- * Set function to write firmware to device's persistent memory
+ * if_usb_boot2_set - write firmware to device's persistent memory
+ *
+ * @dev: target device
+ * @attr: device attributes
+ * @buf: firmware buffer to write
+ * @count: number of bytes to write
+ *
+ * returns: number of bytes written or negative error code
*/
static ssize_t if_usb_boot2_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
@@ -112,7 +122,7 @@
return ret;
}
-/**
+/*
* lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
* (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
* to the device's persistent memory:
@@ -121,9 +131,10 @@
static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
/**
- * @brief call back function to handle the status of the URB
- * @param urb pointer to urb structure
- * @return N/A
+ * if_usb_write_bulk_callback - callback function to handle the status
+ * of the URB
+ * @urb: pointer to &urb structure
+ * returns: N/A
*/
static void if_usb_write_bulk_callback(struct urb *urb)
{
@@ -145,14 +156,14 @@
lbs_host_to_card_done(priv);
} else {
/* print the failure status number for debug */
- lbs_pr_info("URB in failure status: %d\n", urb->status);
+ pr_info("URB in failure status: %d\n", urb->status);
}
}
/**
- * @brief free tx/rx urb, skb and rx buffer
- * @param cardp pointer if_usb_card
- * @return N/A
+ * if_usb_free - free tx/rx urb, skb and rx buffer
+ * @cardp: pointer to &if_usb_card
+ * returns: N/A
*/
static void if_usb_free(struct if_usb_card *cardp)
{
@@ -195,7 +206,7 @@
wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
wake_method.action = cpu_to_le16(CMD_ACT_GET);
if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
- lbs_pr_info("Firmware does not seem to support PS mode\n");
+ netdev_info(priv->dev, "Firmware does not seem to support PS mode\n");
priv->fwcapinfo &= ~FW_CAPINFO_PS;
} else {
if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
@@ -204,7 +215,8 @@
/* The versions which boot up this way don't seem to
work even if we set it to the command interrupt */
priv->fwcapinfo &= ~FW_CAPINFO_PS;
- lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
+ netdev_info(priv->dev,
+ "Firmware doesn't wake via command interrupt; disabling PS mode\n");
}
}
}
@@ -216,7 +228,7 @@
if (cardp->fwdnldover) {
lbs_deb_usb("Download complete, no event. Assuming success\n");
} else {
- lbs_pr_err("Download timed out\n");
+ pr_err("Download timed out\n");
cardp->surprise_removed = 1;
}
wake_up(&cardp->fw_wq);
@@ -231,10 +243,10 @@
#endif
/**
- * @brief sets the configuration values
- * @param ifnum interface number
- * @param id pointer to usb_device_id
- * @return 0 on success, error code on failure
+ * if_usb_probe - sets the configuration values
+ * @intf: &usb_interface pointer
+ * @id: pointer to usb_device_id
+ * returns: 0 on success, error code on failure
*/
static int if_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -250,7 +262,7 @@
cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
if (!cardp) {
- lbs_pr_err("Out of memory allocating private data.\n");
+ pr_err("Out of memory allocating private data\n");
goto error;
}
@@ -340,10 +352,12 @@
usb_set_intfdata(intf, cardp);
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
- lbs_pr_err("cannot register lbs_flash_fw attribute\n");
+ netdev_err(priv->dev,
+ "cannot register lbs_flash_fw attribute\n");
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
- lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
+ netdev_err(priv->dev,
+ "cannot register lbs_flash_boot2 attribute\n");
/*
* EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
@@ -366,9 +380,9 @@
}
/**
- * @brief free resource and cleanup
- * @param intf USB interface structure
- * @return N/A
+ * if_usb_disconnect - free resource and cleanup
+ * @intf: USB interface structure
+ * returns: N/A
*/
static void if_usb_disconnect(struct usb_interface *intf)
{
@@ -398,9 +412,9 @@
}
/**
- * @brief This function download FW
- * @param priv pointer to struct lbs_private
- * @return 0
+ * if_usb_send_fw_pkt - download FW
+ * @cardp: pointer to &struct if_usb_card
+ * returns: 0
*/
static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
{
@@ -486,11 +500,11 @@
}
/**
- * @brief This function transfer the data to the device.
- * @param priv pointer to struct lbs_private
- * @param payload pointer to payload data
- * @param nb data length
- * @return 0 or -1
+ * usb_tx_block - transfer the data to the device
+ * @cardp: pointer to &struct if_usb_card
+ * @payload: pointer to payload data
+ * @nb: data length
+ * returns: 0 for success or negative error code
*/
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
{
@@ -528,7 +542,7 @@
int ret = -1;
if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
- lbs_pr_err("No free skb\n");
+ pr_err("No free skb\n");
goto rx_ret;
}
@@ -587,7 +601,7 @@
if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
- lbs_pr_info("Firmware ready event received\n");
+ pr_info("Firmware ready event received\n");
wake_up(&cardp->fw_wq);
} else {
lbs_deb_usb("Waiting for confirmation; got %x %x\n",
@@ -614,20 +628,20 @@
bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
if (!cardp->bootcmdresp)
- lbs_pr_info("Firmware already seems alive; resetting\n");
+ pr_info("Firmware already seems alive; resetting\n");
cardp->bootcmdresp = -1;
} else {
- lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
+ pr_info("boot cmd response wrong magic number (0x%x)\n",
le32_to_cpu(bootcmdresp.magic));
}
} else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
(bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
(bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
- lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
- bootcmdresp.cmd);
+ pr_info("boot cmd response cmd_tag error (%d)\n",
+ bootcmdresp.cmd);
} else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
- lbs_pr_info("boot cmd response result error (%d)\n",
- bootcmdresp.result);
+ pr_info("boot cmd response result error (%d)\n",
+ bootcmdresp.result);
} else {
cardp->bootcmdresp = 1;
lbs_deb_usbd(&cardp->udev->dev,
@@ -727,11 +741,11 @@
}
/**
- * @brief This function reads of the packet into the upload buff,
- * wake up the main thread and initialise the Rx callack.
+ * if_usb_receive - read the packet into the upload buffer,
+ * wake up the main thread and initialise the Rx callack
*
- * @param urb pointer to struct urb
- * @return N/A
+ * @urb: pointer to &struct urb
+ * returns: N/A
*/
static void if_usb_receive(struct urb *urb)
{
@@ -802,12 +816,12 @@
}
/**
- * @brief This function downloads data to FW
- * @param priv pointer to struct lbs_private structure
- * @param type type of data
- * @param buf pointer to data buffer
- * @param len number of bytes
- * @return 0 or -1
+ * if_usb_host_to_card - downloads data to FW
+ * @priv: pointer to &struct lbs_private structure
+ * @type: type of data
+ * @payload: pointer to data buffer
+ * @nb: number of bytes
+ * returns: 0 for success or negative error code
*/
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb)
@@ -831,10 +845,11 @@
}
/**
- * @brief This function issues Boot command to the Boot2 code
- * @param ivalue 1:Boot from FW by USB-Download
- * 2:Boot from FW in EEPROM
- * @return 0
+ * if_usb_issue_boot_command - issues Boot command to the Boot2 code
+ * @cardp: pointer to &if_usb_card
+ * @ivalue: 1:Boot from FW by USB-Download
+ * 2:Boot from FW in EEPROM
+ * returns: 0 for success or negative error code
*/
static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
{
@@ -853,11 +868,11 @@
/**
- * @brief This function checks the validity of Boot2/FW image.
+ * check_fwfile_format - check the validity of Boot2/FW image
*
- * @param data pointer to image
- * len image length
- * @return 0 or -1
+ * @data: pointer to image
+ * @totlen: image length
+ * returns: 0 (good) or 1 (failure)
*/
static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
{
@@ -892,7 +907,7 @@
} while (!exit);
if (ret)
- lbs_pr_err("firmware file format check FAIL\n");
+ pr_err("firmware file format check FAIL\n");
else
lbs_deb_fw("firmware file format check PASS\n");
@@ -901,13 +916,13 @@
/**
-* @brief This function programs the firmware subject to cmd
+* if_usb_prog_firmware - programs the firmware subject to cmd
*
-* @param cardp the if_usb_card descriptor
-* fwname firmware or boot2 image file name
-* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
-* or BOOT_CMD_UPDATE_BOOT2.
-* @return 0 or error code
+* @cardp: the if_usb_card descriptor
+* @fwname: firmware or boot2 image file name
+* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
+* or BOOT_CMD_UPDATE_BOOT2.
+* returns: 0 or error code
*/
static int if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd)
@@ -989,7 +1004,7 @@
ret = get_fw(cardp, fwname);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto done;
}
@@ -1064,13 +1079,13 @@
usb_kill_urb(cardp->rx_urb);
if (!cardp->fwdnldover) {
- lbs_pr_info("failed to load fw, resetting device!\n");
+ pr_info("failed to load fw, resetting device!\n");
if (--reset_count >= 0) {
if_usb_reset_device(cardp);
goto restart;
}
- lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
+ pr_info("FW download failure, time = %d ms\n", i * 100);
ret = -EIO;
goto release_fw;
}
diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h
index d819e7e..6e42eac 100644
--- a/drivers/net/wireless/libertas/if_usb.h
+++ b/drivers/net/wireless/libertas/if_usb.h
@@ -6,9 +6,9 @@
struct lbs_private;
-/**
- * This file contains definition for USB interface.
- */
+/*
+ * This file contains definition for USB interface.
+ */
#define CMD_TYPE_REQUEST 0xF00DFACE
#define CMD_TYPE_DATA 0xBEADC0DE
#define CMD_TYPE_INDICATION 0xBEEFFACE
@@ -40,7 +40,7 @@
uint8_t pad[2];
};
-/** USB card description structure*/
+/* USB card description structure*/
struct if_usb_card {
struct usb_device *udev;
uint32_t model; /* MODEL_* */
@@ -77,7 +77,7 @@
__le16 boot2_version;
};
-/** fwheader */
+/* fwheader */
struct fwheader {
__le32 dnldcmd;
__le32 baseaddr;
@@ -86,14 +86,14 @@
};
#define FW_MAX_DATA_BLK_SIZE 600
-/** FWData */
+/* FWData */
struct fwdata {
struct fwheader hdr;
__le32 seqnum;
uint8_t data[0];
};
-/** fwsyncheader */
+/* fwsyncheader */
struct fwsyncheader {
__le32 cmd;
__le32 seqnum;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index ca8149c..8c40949 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1,8 +1,10 @@
-/**
- * This file contains the major functions in WLAN
- * driver. It includes init, exit, open, close and main
- * thread etc..
- */
+/*
+ * This file contains the major functions in WLAN
+ * driver. It includes init, exit, open, close and main
+ * thread etc..
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/moduleparam.h>
#include <linux/delay.h>
@@ -34,19 +36,25 @@
EXPORT_SYMBOL_GPL(lbs_debug);
module_param_named(libertas_debug, lbs_debug, int, 0644);
+unsigned int lbs_disablemesh;
+EXPORT_SYMBOL_GPL(lbs_disablemesh);
+module_param_named(libertas_disablemesh, lbs_disablemesh, int, 0644);
-/* This global structure is used to send the confirm_sleep command as
- * fast as possible down to the firmware. */
+
+/*
+ * This global structure is used to send the confirm_sleep command as
+ * fast as possible down to the firmware.
+ */
struct cmd_confirm_sleep confirm_sleep;
-/**
+/*
* the table to keep region code
*/
u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
{ 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
-/**
+/*
* FW rate table. FW refers to rates by their index in this table, not by the
* rate value itself. Values of 0x00 are
* reserved positions.
@@ -57,10 +65,10 @@
};
/**
- * @brief use index to get the data rate
+ * lbs_fw_index_to_data_rate - use index to get the data rate
*
- * @param idx The index of data rate
- * @return data rate or 0
+ * @idx: The index of data rate
+ * returns: data rate or 0
*/
u32 lbs_fw_index_to_data_rate(u8 idx)
{
@@ -70,10 +78,10 @@
}
/**
- * @brief use rate to get the index
+ * lbs_data_rate_to_fw_index - use rate to get the index
*
- * @param rate data rate
- * @return index or 0
+ * @rate: data rate
+ * returns: index or 0
*/
u8 lbs_data_rate_to_fw_index(u32 rate)
{
@@ -91,10 +99,10 @@
/**
- * @brief This function opens the ethX interface
+ * lbs_dev_open - open the ethX interface
*
- * @param dev A pointer to net_device structure
- * @return 0 or -EBUSY if monitor mode active
+ * @dev: A pointer to &net_device structure
+ * returns: 0 or -EBUSY if monitor mode active
*/
static int lbs_dev_open(struct net_device *dev)
{
@@ -120,10 +128,10 @@
}
/**
- * @brief This function closes the ethX interface
+ * lbs_eth_stop - close the ethX interface
*
- * @param dev A pointer to net_device structure
- * @return 0
+ * @dev: A pointer to &net_device structure
+ * returns: 0
*/
static int lbs_eth_stop(struct net_device *dev)
{
@@ -147,28 +155,6 @@
return 0;
}
-static void lbs_tx_timeout(struct net_device *dev)
-{
- struct lbs_private *priv = dev->ml_priv;
-
- lbs_deb_enter(LBS_DEB_TX);
-
- lbs_pr_err("tx watch dog timeout\n");
-
- dev->trans_start = jiffies; /* prevent tx timeout */
-
- if (priv->currenttxskb)
- lbs_send_tx_feedback(priv, 0);
-
- /* XX: Shouldn't we also call into the hw-specific driver
- to kick it somehow? */
- lbs_host_to_card_done(priv);
-
- /* FIXME: reset the card */
-
- lbs_deb_leave(LBS_DEB_TX);
-}
-
void lbs_host_to_card_done(struct lbs_private *priv)
{
unsigned long flags;
@@ -336,12 +322,12 @@
}
/**
- * @brief This function handles the major jobs in the LBS driver.
+ * lbs_thread - handles the major jobs in the LBS driver.
* It handles all events generated by firmware, RX data received
* from firmware and TX data sent from kernel.
*
- * @param data A pointer to lbs_thread structure
- * @return 0
+ * @data: A pointer to &lbs_thread structure
+ * returns: 0
*/
static int lbs_thread(void *data)
{
@@ -462,8 +448,8 @@
if (priv->cmd_timed_out && priv->cur_cmd) {
struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
- lbs_pr_info("Timeout submitting command 0x%04x\n",
- le16_to_cpu(cmdnode->cmdbuf->command));
+ netdev_info(dev, "Timeout submitting command 0x%04x\n",
+ le16_to_cpu(cmdnode->cmdbuf->command));
lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
if (priv->reset_card)
priv->reset_card(priv);
@@ -490,8 +476,8 @@
* after firmware fixes it
*/
priv->psstate = PS_STATE_AWAKE;
- lbs_pr_alert("ignore PS_SleepConfirm in "
- "non-connected state\n");
+ netdev_alert(dev,
+ "ignore PS_SleepConfirm in non-connected state\n");
}
}
@@ -540,11 +526,11 @@
}
/**
- * @brief This function gets the HW spec from the firmware and sets
- * some basic parameters.
+ * lbs_setup_firmware - gets the HW spec from the firmware and sets
+ * some basic parameters
*
- * @param priv A pointer to struct lbs_private structure
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private structure
+ * returns: 0 or -1
*/
static int lbs_setup_firmware(struct lbs_private *priv)
{
@@ -585,7 +571,8 @@
if (priv->is_deep_sleep) {
ret = lbs_set_deep_sleep(priv, 0);
if (ret) {
- lbs_pr_err("deep sleep cancellation failed: %d\n", ret);
+ netdev_err(priv->dev,
+ "deep sleep cancellation failed: %d\n", ret);
return ret;
}
priv->deep_sleep_required = 1;
@@ -618,7 +605,8 @@
priv->deep_sleep_required = 0;
ret = lbs_set_deep_sleep(priv, 1);
if (ret)
- lbs_pr_err("deep sleep activation failed: %d\n", ret);
+ netdev_err(priv->dev,
+ "deep sleep activation failed: %d\n", ret);
}
if (priv->setup_fw_on_resume)
@@ -630,8 +618,10 @@
EXPORT_SYMBOL_GPL(lbs_resume);
/**
- * This function handles the timeout of command sending.
- * It will re-send the same command again.
+ * lbs_cmd_timeout_handler - handles the timeout of command sending.
+ * It will re-send the same command again.
+ *
+ * @data: &struct lbs_private pointer
*/
static void lbs_cmd_timeout_handler(unsigned long data)
{
@@ -644,8 +634,8 @@
if (!priv->cur_cmd)
goto out;
- lbs_pr_info("command 0x%04x timed out\n",
- le16_to_cpu(priv->cur_cmd->cmdbuf->command));
+ netdev_info(priv->dev, "command 0x%04x timed out\n",
+ le16_to_cpu(priv->cur_cmd->cmdbuf->command));
priv->cmd_timed_out = 1;
wake_up_interruptible(&priv->waitq);
@@ -655,8 +645,10 @@
}
/**
- * This function put the device back to deep sleep mode when timer expires
- * and no activity (command, event, data etc.) is detected.
+ * auto_deepsleep_timer_fn - put the device back to deep sleep mode when
+ * timer expires and no activity (command, event, data etc.) is detected.
+ * @data: &struct lbs_private pointer
+ * returns: N/A
*/
static void auto_deepsleep_timer_fn(unsigned long data)
{
@@ -748,7 +740,7 @@
/* Allocate the command buffers */
if (lbs_allocate_cmd_buffer(priv)) {
- lbs_pr_err("Out of memory allocating command buffers\n");
+ pr_err("Out of memory allocating command buffers\n");
ret = -ENOMEM;
goto out;
}
@@ -758,7 +750,7 @@
/* Create the event FIFO */
ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
if (ret) {
- lbs_pr_err("Out of memory allocating event FIFO buffer\n");
+ pr_err("Out of memory allocating event FIFO buffer\n");
goto out;
}
@@ -785,18 +777,18 @@
.ndo_stop = lbs_eth_stop,
.ndo_start_xmit = lbs_hard_start_xmit,
.ndo_set_mac_address = lbs_set_mac_address,
- .ndo_tx_timeout = lbs_tx_timeout,
.ndo_set_multicast_list = lbs_set_multicast_list,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
/**
- * @brief This function adds the card. it will probe the
+ * lbs_add_card - adds the card. It will probe the
* card, allocate the lbs_priv and initialize the device.
*
- * @param card A pointer to card
- * @return A pointer to struct lbs_private structure
+ * @card: A pointer to card
+ * @dmdev: A pointer to &struct device
+ * returns: A pointer to &struct lbs_private structure
*/
struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
{
@@ -809,7 +801,7 @@
/* Allocate an Ethernet device and register it */
wdev = lbs_cfg_alloc(dmdev);
if (IS_ERR(wdev)) {
- lbs_pr_err("cfg80211 init failed\n");
+ pr_err("cfg80211 init failed\n");
goto done;
}
@@ -818,7 +810,7 @@
priv->wdev = wdev;
if (lbs_init_adapter(priv)) {
- lbs_pr_err("failed to initialize adapter structure.\n");
+ pr_err("failed to initialize adapter structure\n");
goto err_wdev;
}
@@ -950,17 +942,20 @@
goto done;
if (lbs_cfg_register(priv)) {
- lbs_pr_err("cannot register device\n");
+ pr_err("cannot register device\n");
goto done;
}
lbs_update_channel(priv);
- lbs_init_mesh(priv);
+ if (!lbs_disablemesh)
+ lbs_init_mesh(priv);
+ else
+ pr_info("%s: mesh disabled\n", dev->name);
lbs_debugfs_init_one(priv, dev);
- lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
+ netdev_info(dev, "Marvell WLAN 802.11 adapter\n");
ret = 0;
@@ -1057,19 +1052,19 @@
EXPORT_SYMBOL_GPL(lbs_notify_command_response);
/**
- * @brief Retrieves two-stage firmware
+ * lbs_get_firmware - Retrieves two-stage firmware
*
- * @param dev A pointer to device structure
- * @param user_helper User-defined helper firmware file
- * @param user_mainfw User-defined main firmware file
- * @param card_model Bus-specific card model ID used to filter firmware table
- * elements
- * @param fw_table Table of firmware file names and device model numbers
- * terminated by an entry with a NULL helper name
- * @param helper On success, the helper firmware; caller must free
- * @param mainfw On success, the main firmware; caller must free
+ * @dev: A pointer to &device structure
+ * @user_helper: User-defined helper firmware file
+ * @user_mainfw: User-defined main firmware file
+ * @card_model: Bus-specific card model ID used to filter firmware table
+ * elements
+ * @fw_table: Table of firmware file names and device model numbers
+ * terminated by an entry with a NULL helper name
+ * @helper: On success, the helper firmware; caller must free
+ * @mainfw: On success, the main firmware; caller must free
*
- * @return 0 on success, non-zero on failure
+ * returns: 0 on success, non-zero on failure
*/
int lbs_get_firmware(struct device *dev, const char *user_helper,
const char *user_mainfw, u32 card_model,
@@ -1087,16 +1082,16 @@
if (user_helper) {
ret = request_firmware(helper, user_helper, dev);
if (ret) {
- lbs_pr_err("couldn't find helper firmware %s",
- user_helper);
+ dev_err(dev, "couldn't find helper firmware %s\n",
+ user_helper);
goto fail;
}
}
if (user_mainfw) {
ret = request_firmware(mainfw, user_mainfw, dev);
if (ret) {
- lbs_pr_err("couldn't find main firmware %s",
- user_mainfw);
+ dev_err(dev, "couldn't find main firmware %s\n",
+ user_mainfw);
goto fail;
}
}
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index 9d097b9..24cf066 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
@@ -16,12 +18,15 @@
* Mesh sysfs support
*/
-/**
+/*
* Attributes exported through sysfs
*/
/**
- * @brief Get function for sysfs attribute anycast_mask
+ * lbs_anycast_get - Get function for sysfs attribute anycast_mask
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t lbs_anycast_get(struct device *dev,
struct device_attribute *attr, char * buf)
@@ -40,7 +45,11 @@
}
/**
- * @brief Set function for sysfs attribute anycast_mask
+ * lbs_anycast_set - Set function for sysfs attribute anycast_mask
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t lbs_anycast_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
@@ -62,7 +71,10 @@
}
/**
- * @brief Get function for sysfs attribute prb_rsp_limit
+ * lbs_prb_rsp_limit_get - Get function for sysfs attribute prb_rsp_limit
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -85,7 +97,11 @@
}
/**
- * @brief Set function for sysfs attribute prb_rsp_limit
+ * lbs_prb_rsp_limit_set - Set function for sysfs attribute prb_rsp_limit
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
@@ -114,7 +130,10 @@
}
/**
- * Get function for sysfs attribute mesh
+ * lbs_mesh_get - Get function for sysfs attribute mesh
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t lbs_mesh_get(struct device *dev,
struct device_attribute *attr, char * buf)
@@ -124,7 +143,11 @@
}
/**
- * Set function for sysfs attribute mesh
+ * lbs_mesh_set - Set function for sysfs attribute mesh
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t lbs_mesh_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
@@ -151,19 +174,19 @@
return count;
}
-/**
+/*
* lbs_mesh attribute to be exported per ethX interface
* through sysfs (/sys/class/net/ethX/lbs_mesh)
*/
static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
-/**
+/*
* anycast_mask attribute to be exported per mshX interface
* through sysfs (/sys/class/net/mshX/anycast_mask)
*/
static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
-/**
+/*
* prb_rsp_limit attribute to be exported per mshX interface
* through sysfs (/sys/class/net/mshX/prb_rsp_limit)
*/
@@ -246,7 +269,7 @@
lbs_add_mesh(priv);
if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
- lbs_pr_err("cannot register lbs_mesh attribute\n");
+ netdev_err(dev, "cannot register lbs_mesh attribute\n");
ret = 1;
}
@@ -274,10 +297,10 @@
/**
- * @brief This function closes the mshX interface
+ * lbs_mesh_stop - close the mshX interface
*
- * @param dev A pointer to net_device structure
- * @return 0
+ * @dev: A pointer to &net_device structure
+ * returns: 0
*/
static int lbs_mesh_stop(struct net_device *dev)
{
@@ -301,10 +324,10 @@
}
/**
- * @brief This function opens the mshX interface
+ * lbs_mesh_dev_open - open the mshX interface
*
- * @param dev A pointer to net_device structure
- * @return 0 or -EBUSY if monitor mode active
+ * @dev: A pointer to &net_device structure
+ * returns: 0 or -EBUSY if monitor mode active
*/
static int lbs_mesh_dev_open(struct net_device *dev)
{
@@ -342,10 +365,10 @@
};
/**
- * @brief This function adds mshX interface
+ * lbs_add_mesh - add mshX interface
*
- * @param priv A pointer to the struct lbs_private structure
- * @return 0 if successful, -X otherwise
+ * @priv: A pointer to the &struct lbs_private structure
+ * returns: 0 if successful, -X otherwise
*/
int lbs_add_mesh(struct lbs_private *priv)
{
@@ -374,7 +397,7 @@
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
- lbs_pr_err("cannot register mshX virtual interface\n");
+ pr_err("cannot register mshX virtual interface\n");
goto err_free;
}
@@ -456,13 +479,13 @@
*/
/**
- * @brief Add or delete Mesh Blinding Table entries
+ * lbs_mesh_bt_add_del - Add or delete Mesh Blinding Table entries
*
- * @param priv A pointer to struct lbs_private structure
- * @param add TRUE to add the entry, FALSE to delete it
- * @param addr1 Destination address to blind or unblind
+ * @priv: A pointer to &struct lbs_private structure
+ * @add: TRUE to add the entry, FALSE to delete it
+ * @addr1: Destination address to blind or unblind
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1)
{
@@ -493,11 +516,11 @@
}
/**
- * @brief Reset/clear the mesh blinding table
+ * lbs_mesh_bt_reset - Reset/clear the mesh blinding table
*
- * @param priv A pointer to struct lbs_private structure
+ * @priv: A pointer to &struct lbs_private structure
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_reset(struct lbs_private *priv)
{
@@ -517,17 +540,18 @@
}
/**
- * @brief Gets the inverted status of the mesh blinding table
+ * lbs_mesh_bt_get_inverted - Gets the inverted status of the mesh
+ * blinding table
*
- * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
- * table, but an inverted table allows *only* traffic from nodes listed in
- * the table.
+ * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
+ * table, but an inverted table allows *only* traffic from nodes listed in
+ * the table.
*
- * @param priv A pointer to struct lbs_private structure
- * @param invert On success, TRUE if the blinding table is inverted,
- * FALSE if it is not inverted
+ * @priv: A pointer to &struct lbs_private structure
+ * @inverted: On success, TRUE if the blinding table is inverted,
+ * FALSE if it is not inverted
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted)
{
@@ -551,18 +575,19 @@
}
/**
- * @brief Sets the inverted status of the mesh blinding table
+ * lbs_mesh_bt_set_inverted - Sets the inverted status of the mesh
+ * blinding table
*
- * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
- * table, but an inverted table allows *only* traffic from nodes listed in
- * the table.
+ * Normally the firmware "blinds" or ignores traffic from mesh nodes in the
+ * table, but an inverted table allows *only* traffic from nodes listed in
+ * the table.
*
- * @param priv A pointer to struct lbs_private structure
- * @param invert TRUE to invert the blinding table (only traffic from
- * listed nodes allowed), FALSE to return it
- * to normal state (listed nodes ignored)
+ * @priv: A pointer to &struct lbs_private structure
+ * @inverted: TRUE to invert the blinding table (only traffic from
+ * listed nodes allowed), FALSE to return it
+ * to normal state (listed nodes ignored)
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted)
{
@@ -583,13 +608,13 @@
}
/**
- * @brief List an entry in the mesh blinding table
+ * lbs_mesh_bt_get_entry - List an entry in the mesh blinding table
*
- * @param priv A pointer to struct lbs_private structure
- * @param id The ID of the entry to list
- * @param addr1 MAC address associated with the table entry
+ * @priv: A pointer to &struct lbs_private structure
+ * @id: The ID of the entry to list
+ * @addr1: MAC address associated with the table entry
*
- * @return 0 on success, error on failure
+ * returns: 0 on success, error on failure
*/
int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1)
{
@@ -614,14 +639,14 @@
}
/**
- * @brief Access the mesh forwarding table
+ * lbs_cmd_fwt_access - Access the mesh forwarding table
*
- * @param priv A pointer to struct lbs_private structure
- * @param cmd_action The forwarding table action to perform
- * @param cmd The pre-filled FWT_ACCESS command
+ * @priv: A pointer to &struct lbs_private structure
+ * @cmd_action: The forwarding table action to perform
+ * @cmd: The pre-filled FWT_ACCESS command
*
- * @return 0 on success and 'cmd' will be filled with the
- * firmware's response
+ * returns: 0 on success and 'cmd' will be filled with the
+ * firmware's response
*/
int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action,
struct cmd_ds_fwt_access *cmd)
@@ -774,7 +799,10 @@
}
/**
- * @brief Get function for sysfs attribute bootflag
+ * bootflag_get - Get function for sysfs attribute bootflag
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t bootflag_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -791,7 +819,11 @@
}
/**
- * @brief Set function for sysfs attribute bootflag
+ * bootflag_set - Set function for sysfs attribute bootflag
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@@ -817,7 +849,10 @@
}
/**
- * @brief Get function for sysfs attribute boottime
+ * boottime_get - Get function for sysfs attribute boottime
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t boottime_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -834,7 +869,11 @@
}
/**
- * @brief Set function for sysfs attribute boottime
+ * boottime_set - Set function for sysfs attribute boottime
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t boottime_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
@@ -869,7 +908,10 @@
}
/**
- * @brief Get function for sysfs attribute channel
+ * channel_get - Get function for sysfs attribute channel
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t channel_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -886,7 +928,11 @@
}
/**
- * @brief Set function for sysfs attribute channel
+ * channel_set - Set function for sysfs attribute channel
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@@ -912,7 +958,10 @@
}
/**
- * @brief Get function for sysfs attribute mesh_id
+ * mesh_id_get - Get function for sysfs attribute mesh_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -926,7 +975,7 @@
return ret;
if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
- lbs_pr_err("inconsistent mesh ID length");
+ dev_err(dev, "inconsistent mesh ID length\n");
defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
}
@@ -938,7 +987,11 @@
}
/**
- * @brief Set function for sysfs attribute mesh_id
+ * mesh_id_set - Set function for sysfs attribute mesh_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@@ -980,7 +1033,10 @@
}
/**
- * @brief Get function for sysfs attribute protocol_id
+ * protocol_id_get - Get function for sysfs attribute protocol_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t protocol_id_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -997,7 +1053,11 @@
}
/**
- * @brief Set function for sysfs attribute protocol_id
+ * protocol_id_set - Set function for sysfs attribute protocol_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t protocol_id_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
@@ -1034,7 +1094,10 @@
}
/**
- * @brief Get function for sysfs attribute metric_id
+ * metric_id_get - Get function for sysfs attribute metric_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t metric_id_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -1051,7 +1114,11 @@
}
/**
- * @brief Set function for sysfs attribute metric_id
+ * metric_id_set - Set function for sysfs attribute metric_id
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@@ -1088,7 +1155,10 @@
}
/**
- * @brief Get function for sysfs attribute capability
+ * capability_get - Get function for sysfs attribute capability
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer where data will be returned
*/
static ssize_t capability_get(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -1105,7 +1175,11 @@
}
/**
- * @brief Set function for sysfs attribute capability
+ * capability_set - Set function for sysfs attribute capability
+ * @dev: the &struct device
+ * @attr: device attributes
+ * @buf: buffer that contains new attribute value
+ * @count: size of buffer
*/
static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h
index afb2e8d..ee95c73 100644
--- a/drivers/net/wireless/libertas/mesh.h
+++ b/drivers/net/wireless/libertas/mesh.h
@@ -1,6 +1,6 @@
-/**
- * Contains all definitions needed for the Libertas' MESH implementation.
- */
+/*
+ * Contains all definitions needed for the Libertas' MESH implementation.
+ */
#ifndef _LBS_MESH_H_
#define _LBS_MESH_H_
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index a2b1df2..fdb0448 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -1,6 +1,9 @@
-/**
- * This file contains the handling of RX in wlan driver.
- */
+/*
+ * This file contains the handling of RX in wlan driver.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -40,12 +43,12 @@
struct sk_buff *skb);
/**
- * @brief This function processes received packet and forwards it
- * to kernel/upper layer
+ * lbs_process_rxed_packet - processes received packet and forwards it
+ * to kernel/upper layer
*
- * @param priv A pointer to struct lbs_private
- * @param skb A pointer to skb which includes the received packet
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private
+ * @skb: A pointer to skb which includes the received packet
+ * returns: 0 or -1
*/
int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
{
@@ -156,11 +159,11 @@
EXPORT_SYMBOL_GPL(lbs_process_rxed_packet);
/**
- * @brief This function converts Tx/Rx rates from the Marvell WLAN format
- * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
+ * convert_mv_rate_to_radiotap - converts Tx/Rx rates from Marvell WLAN format
+ * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
*
- * @param rate Input rate
- * @return Output Rate (0 if invalid)
+ * @rate: Input rate
+ * returns: Output Rate (0 if invalid)
*/
static u8 convert_mv_rate_to_radiotap(u8 rate)
{
@@ -191,17 +194,17 @@
case 12: /* 54 Mbps */
return 108;
}
- lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate);
+ pr_alert("Invalid Marvell WLAN rate %i\n", rate);
return 0;
}
/**
- * @brief This function processes a received 802.11 packet and forwards it
- * to kernel/upper layer
+ * process_rxed_802_11_packet - processes a received 802.11 packet and forwards
+ * it to kernel/upper layer
*
- * @param priv A pointer to struct lbs_private
- * @param skb A pointer to skb which includes the received packet
- * @return 0 or -1
+ * @priv: A pointer to &struct lbs_private
+ * @skb: A pointer to skb which includes the received packet
+ * returns: 0 or -1
*/
static int process_rxed_802_11_packet(struct lbs_private *priv,
struct sk_buff *skb)
@@ -248,7 +251,7 @@
/* add space for the new radio header */
if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) &&
pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) {
- lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__);
+ netdev_alert(dev, "%s: couldn't pskb_expand_head\n", __func__);
ret = -ENOMEM;
kfree_skb(skb);
goto done;
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 8000ca6..bbb95f8 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -1,6 +1,6 @@
-/**
- * This file contains the handling of TX in wlan driver.
- */
+/*
+ * This file contains the handling of TX in wlan driver.
+ */
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/sched.h>
@@ -13,11 +13,11 @@
#include "dev.h"
/**
- * @brief This function converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
- * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
+ * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
+ * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
*
- * @param rate Input rate
- * @return Output Rate (0 if invalid)
+ * @rate: Input rate
+ * returns: Output Rate (0 if invalid)
*/
static u32 convert_radiotap_rate_to_mv(u8 rate)
{
@@ -51,12 +51,12 @@
}
/**
- * @brief This function checks the conditions and sends packet to IF
- * layer if everything is ok.
+ * lbs_hard_start_xmit - checks the conditions and sends packet to IF
+ * layer if everything is ok
*
- * @param priv A pointer to struct lbs_private structure
- * @param skb A pointer to skb which includes TX packet
- * @return 0 or -1
+ * @skb: A pointer to skb which includes TX packet
+ * @dev: A pointer to the &struct net_device
+ * returns: 0 or -1
*/
netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
@@ -168,13 +168,13 @@
}
/**
- * @brief This function sends to the host the last transmitted packet,
- * filling the radiotap headers with transmission information.
+ * lbs_send_tx_feedback - sends to the host the last transmitted packet,
+ * filling the radiotap headers with transmission information.
*
- * @param priv A pointer to struct lbs_private structure
- * @param status A 32 bit value containing transmission status.
+ * @priv: A pointer to &struct lbs_private structure
+ * @try_count: A 32-bit value containing transmission retry status.
*
- * @returns void
+ * returns: void
*/
void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
{
diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h
index 462fbb4..cf1d9b0 100644
--- a/drivers/net/wireless/libertas/types.h
+++ b/drivers/net/wireless/libertas/types.h
@@ -1,6 +1,6 @@
-/**
- * This header file contains definition for global types
- */
+/*
+ * This header file contains definition for global types
+ */
#ifndef _LBS_TYPES_H_
#define _LBS_TYPES_H_
@@ -54,7 +54,7 @@
struct ieee_ie_ds_param_set ds;
} __packed;
-/** TLV type ID definition */
+/* TLV type ID definition */
#define PROPRIETARY_TLV_BASE_ID 0x0100
/* Terminating TLV type */
@@ -96,7 +96,7 @@
#define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37)
#define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291)
-/** TLV related data structures*/
+/* TLV related data structures */
struct mrvl_ie_header {
__le16 type;
__le16 len;
@@ -177,7 +177,7 @@
__le16 auth;
} __packed;
-/** Local Power capability */
+/* Local Power capability */
struct mrvl_ie_power_capability {
struct mrvl_ie_header header;
s8 minpower;
@@ -235,9 +235,11 @@
struct led_bhv ledbhv[1];
} __packed;
-/* Meant to be packed as the value member of a struct ieee80211_info_element.
+/*
+ * Meant to be packed as the value member of a struct ieee80211_info_element.
* Note that the len member of the ieee80211_info_element varies depending on
- * the mesh_id_len */
+ * the mesh_id_len
+ */
struct mrvl_meshie_val {
uint8_t oui[3];
uint8_t type;
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index f4f4257..9d4a40e 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1515,19 +1515,10 @@
if (hwsim_mon == NULL)
goto failed;
- rtnl_lock();
-
- err = dev_alloc_name(hwsim_mon, hwsim_mon->name);
+ err = register_netdev(hwsim_mon);
if (err < 0)
goto failed_mon;
-
- err = register_netdevice(hwsim_mon);
- if (err < 0)
- goto failed_mon;
-
- rtnl_unlock();
-
return 0;
failed_mon:
diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
new file mode 100644
index 0000000..916183d
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -0,0 +1,744 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11n
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+/*
+ * Fills HT capability information field, AMPDU Parameters field, HT extended
+ * capability field, and supported MCS set fields.
+ *
+ * HT capability information field, AMPDU Parameters field, supported MCS set
+ * fields are retrieved from cfg80211 stack
+ *
+ * RD responder bit to set to clear in the extended capability header.
+ */
+void
+mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type,
+ struct mwifiex_ie_types_htcap *ht_cap)
+{
+ uint16_t ht_ext_cap = le16_to_cpu(ht_cap->ht_cap.extended_ht_cap_info);
+ struct ieee80211_supported_band *sband =
+ priv->wdev->wiphy->bands[radio_type];
+
+ ht_cap->ht_cap.ampdu_params_info =
+ (sband->ht_cap.ampdu_factor &
+ IEEE80211_HT_AMPDU_PARM_FACTOR)|
+ ((sband->ht_cap.ampdu_density <<
+ IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT) &
+ IEEE80211_HT_AMPDU_PARM_DENSITY);
+
+ memcpy((u8 *) &ht_cap->ht_cap.mcs, &sband->ht_cap.mcs,
+ sizeof(sband->ht_cap.mcs));
+
+ if (priv->bss_mode == NL80211_IFTYPE_STATION ||
+ (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+ /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
+ SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask);
+
+ /* Clear RD responder bit */
+ ht_ext_cap &= ~IEEE80211_HT_EXT_CAP_RD_RESPONDER;
+
+ ht_cap->ht_cap.cap_info = cpu_to_le16(sband->ht_cap.cap);
+ ht_cap->ht_cap.extended_ht_cap_info = cpu_to_le16(ht_ext_cap);
+}
+
+/*
+ * This function returns the pointer to an entry in BA Stream
+ * table which matches the requested BA status.
+ */
+static struct mwifiex_tx_ba_stream_tbl *
+mwifiex_11n_get_tx_ba_stream_status(struct mwifiex_private *priv,
+ enum mwifiex_ba_status ba_status)
+{
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) {
+ if (tx_ba_tsr_tbl->ba_status == ba_status) {
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock,
+ flags);
+ return tx_ba_tsr_tbl;
+ }
+ }
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+ return NULL;
+}
+
+/*
+ * This function handles the command response of delete a block
+ * ack request.
+ *
+ * The function checks the response success status and takes action
+ * accordingly (send an add BA request in case of success, or recreate
+ * the deleted stream in case of failure, if the add BA was also
+ * initiated by us).
+ */
+int mwifiex_ret_11n_delba(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ int tid;
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tbl;
+ struct host_cmd_ds_11n_delba *del_ba =
+ (struct host_cmd_ds_11n_delba *) &resp->params.del_ba;
+ uint16_t del_ba_param_set = le16_to_cpu(del_ba->del_ba_param_set);
+
+ tid = del_ba_param_set >> DELBA_TID_POS;
+ if (del_ba->del_result == BA_RESULT_SUCCESS) {
+ mwifiex_11n_delete_ba_stream_tbl(priv, tid,
+ del_ba->peer_mac_addr, TYPE_DELBA_SENT,
+ INITIATOR_BIT(del_ba_param_set));
+
+ tx_ba_tbl = mwifiex_11n_get_tx_ba_stream_status(priv,
+ BA_STREAM_SETUP_INPROGRESS);
+ if (tx_ba_tbl)
+ mwifiex_send_addba(priv, tx_ba_tbl->tid,
+ tx_ba_tbl->ra);
+ } else { /*
+ * In case of failure, recreate the deleted stream in case
+ * we initiated the ADDBA
+ */
+ if (INITIATOR_BIT(del_ba_param_set)) {
+ mwifiex_11n_create_tx_ba_stream_tbl(priv,
+ del_ba->peer_mac_addr, tid,
+ BA_STREAM_SETUP_INPROGRESS);
+
+ tx_ba_tbl = mwifiex_11n_get_tx_ba_stream_status(priv,
+ BA_STREAM_SETUP_INPROGRESS);
+ if (tx_ba_tbl)
+ mwifiex_11n_delete_ba_stream_tbl(priv,
+ tx_ba_tbl->tid, tx_ba_tbl->ra,
+ TYPE_DELBA_SENT, true);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of add a block
+ * ack request.
+ *
+ * Handling includes changing the header fields to CPU formats, checking
+ * the response success status and taking actions accordingly (delete the
+ * BA stream table in case of failure).
+ */
+int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ int tid;
+ struct host_cmd_ds_11n_addba_rsp *add_ba_rsp =
+ (struct host_cmd_ds_11n_addba_rsp *) &resp->params.add_ba_rsp;
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tbl;
+
+ add_ba_rsp->ssn = cpu_to_le16((le16_to_cpu(add_ba_rsp->ssn))
+ & SSN_MASK);
+
+ tid = (le16_to_cpu(add_ba_rsp->block_ack_param_set)
+ & IEEE80211_ADDBA_PARAM_TID_MASK)
+ >> BLOCKACKPARAM_TID_POS;
+ if (le16_to_cpu(add_ba_rsp->status_code) == BA_RESULT_SUCCESS) {
+ tx_ba_tbl = mwifiex_11n_get_tx_ba_stream_tbl(priv, tid,
+ add_ba_rsp->peer_mac_addr);
+ if (tx_ba_tbl) {
+ dev_dbg(priv->adapter->dev, "info: BA stream complete\n");
+ tx_ba_tbl->ba_status = BA_STREAM_SETUP_COMPLETE;
+ } else {
+ dev_err(priv->adapter->dev, "BA stream not created\n");
+ }
+ } else {
+ mwifiex_11n_delete_ba_stream_tbl(priv, tid,
+ add_ba_rsp->peer_mac_addr,
+ TYPE_DELBA_SENT, true);
+ if (add_ba_rsp->add_rsp_result != BA_RESULT_TIMEOUT)
+ priv->aggr_prio_tbl[tid].ampdu_ap =
+ BA_STREAM_NOT_ALLOWED;
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of 11n configuration request.
+ *
+ * Handling includes changing the header fields into CPU format.
+ */
+int mwifiex_ret_11n_cfg(struct host_cmd_ds_command *resp, void *data_buf)
+{
+ struct mwifiex_ds_11n_tx_cfg *tx_cfg;
+ struct host_cmd_ds_11n_cfg *htcfg = &resp->params.htcfg;
+
+ if (data_buf) {
+ tx_cfg = (struct mwifiex_ds_11n_tx_cfg *) data_buf;
+ tx_cfg->tx_htcap = le16_to_cpu(htcfg->ht_tx_cap);
+ tx_cfg->tx_htinfo = le16_to_cpu(htcfg->ht_tx_info);
+ }
+ return 0;
+}
+
+/*
+ * This function prepares command of reconfigure Tx buffer.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting Tx buffer size (for SET only)
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_recfg_tx_buf(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd, int cmd_action,
+ void *data_buf)
+{
+ struct host_cmd_ds_txbuf_cfg *tx_buf = &cmd->params.tx_buf;
+ u16 action = (u16) cmd_action;
+ u16 buf_size = *((u16 *) data_buf);
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_RECONFIGURE_TX_BUFF);
+ cmd->size =
+ cpu_to_le16(sizeof(struct host_cmd_ds_txbuf_cfg) + S_DS_GEN);
+ tx_buf->action = cpu_to_le16(action);
+ switch (action) {
+ case HostCmd_ACT_GEN_SET:
+ dev_dbg(priv->adapter->dev, "cmd: set tx_buf=%d\n", buf_size);
+ tx_buf->buff_size = cpu_to_le16(buf_size);
+ break;
+ case HostCmd_ACT_GEN_GET:
+ default:
+ tx_buf->buff_size = 0;
+ break;
+ }
+ return 0;
+}
+
+/*
+ * This function prepares command of AMSDU aggregation control.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting AMSDU control parameters (for SET only)
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_amsdu_aggr_ctrl(struct host_cmd_ds_command *cmd,
+ int cmd_action, void *data_buf)
+{
+ struct host_cmd_ds_amsdu_aggr_ctrl *amsdu_ctrl =
+ &cmd->params.amsdu_aggr_ctrl;
+ u16 action = (u16) cmd_action;
+ struct mwifiex_ds_11n_amsdu_aggr_ctrl *aa_ctrl =
+ (struct mwifiex_ds_11n_amsdu_aggr_ctrl *) data_buf;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_AMSDU_AGGR_CTRL);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_amsdu_aggr_ctrl)
+ + S_DS_GEN);
+ amsdu_ctrl->action = cpu_to_le16(action);
+ switch (action) {
+ case HostCmd_ACT_GEN_SET:
+ amsdu_ctrl->enable = cpu_to_le16(aa_ctrl->enable);
+ amsdu_ctrl->curr_buf_size = 0;
+ break;
+ case HostCmd_ACT_GEN_GET:
+ default:
+ amsdu_ctrl->curr_buf_size = 0;
+ break;
+ }
+ return 0;
+}
+
+/*
+ * This function handles the command response of AMSDU aggregation
+ * control request.
+ *
+ * Handling includes changing the header fields into CPU format.
+ */
+int mwifiex_ret_amsdu_aggr_ctrl(struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct mwifiex_ds_11n_amsdu_aggr_ctrl *amsdu_aggr_ctrl;
+ struct host_cmd_ds_amsdu_aggr_ctrl *amsdu_ctrl =
+ &resp->params.amsdu_aggr_ctrl;
+
+ if (data_buf) {
+ amsdu_aggr_ctrl =
+ (struct mwifiex_ds_11n_amsdu_aggr_ctrl *) data_buf;
+ amsdu_aggr_ctrl->enable = le16_to_cpu(amsdu_ctrl->enable);
+ amsdu_aggr_ctrl->curr_buf_size =
+ le16_to_cpu(amsdu_ctrl->curr_buf_size);
+ }
+ return 0;
+}
+
+/*
+ * This function prepares 11n configuration command.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting HT Tx capability and HT Tx information fields
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_11n_cfg(struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct host_cmd_ds_11n_cfg *htcfg = &cmd->params.htcfg;
+ struct mwifiex_ds_11n_tx_cfg *txcfg =
+ (struct mwifiex_ds_11n_tx_cfg *) data_buf;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_11N_CFG);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_11n_cfg) + S_DS_GEN);
+ htcfg->action = cpu_to_le16(cmd_action);
+ htcfg->ht_tx_cap = cpu_to_le16(txcfg->tx_htcap);
+ htcfg->ht_tx_info = cpu_to_le16(txcfg->tx_htinfo);
+ return 0;
+}
+
+/*
+ * This function appends an 11n TLV to a buffer.
+ *
+ * Buffer allocation is responsibility of the calling
+ * function. No size validation is made here.
+ *
+ * The function fills up the following sections, if applicable -
+ * - HT capability IE
+ * - HT information IE (with channel list)
+ * - 20/40 BSS Coexistence IE
+ * - HT Extended Capabilities IE
+ */
+int
+mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc,
+ u8 **buffer)
+{
+ struct mwifiex_ie_types_htcap *ht_cap;
+ struct mwifiex_ie_types_htinfo *ht_info;
+ struct mwifiex_ie_types_chan_list_param_set *chan_list;
+ struct mwifiex_ie_types_2040bssco *bss_co_2040;
+ struct mwifiex_ie_types_extcap *ext_cap;
+ int ret_len = 0;
+ struct ieee80211_supported_band *sband;
+ u8 radio_type;
+
+ if (!buffer || !*buffer)
+ return ret_len;
+
+ radio_type = mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
+ sband = priv->wdev->wiphy->bands[radio_type];
+
+ if (bss_desc->bcn_ht_cap) {
+ ht_cap = (struct mwifiex_ie_types_htcap *) *buffer;
+ memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap));
+ ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY);
+ ht_cap->header.len =
+ cpu_to_le16(sizeof(struct ieee80211_ht_cap));
+ memcpy((u8 *) ht_cap + sizeof(struct mwifiex_ie_types_header),
+ (u8 *) bss_desc->bcn_ht_cap +
+ sizeof(struct ieee_types_header),
+ le16_to_cpu(ht_cap->header.len));
+
+ mwifiex_fill_cap_info(priv, radio_type, ht_cap);
+
+ *buffer += sizeof(struct mwifiex_ie_types_htcap);
+ ret_len += sizeof(struct mwifiex_ie_types_htcap);
+ }
+
+ if (bss_desc->bcn_ht_info) {
+ if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+ ht_info = (struct mwifiex_ie_types_htinfo *) *buffer;
+ memset(ht_info, 0,
+ sizeof(struct mwifiex_ie_types_htinfo));
+ ht_info->header.type =
+ cpu_to_le16(WLAN_EID_HT_INFORMATION);
+ ht_info->header.len =
+ cpu_to_le16(sizeof(struct ieee80211_ht_info));
+
+ memcpy((u8 *) ht_info +
+ sizeof(struct mwifiex_ie_types_header),
+ (u8 *) bss_desc->bcn_ht_info +
+ sizeof(struct ieee_types_header),
+ le16_to_cpu(ht_info->header.len));
+
+ if (!(sband->ht_cap.cap &
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+ ht_info->ht_info.ht_param &=
+ ~(IEEE80211_HT_PARAM_CHAN_WIDTH_ANY |
+ IEEE80211_HT_PARAM_CHA_SEC_OFFSET);
+
+ *buffer += sizeof(struct mwifiex_ie_types_htinfo);
+ ret_len += sizeof(struct mwifiex_ie_types_htinfo);
+ }
+
+ chan_list =
+ (struct mwifiex_ie_types_chan_list_param_set *) *buffer;
+ memset(chan_list, 0,
+ sizeof(struct mwifiex_ie_types_chan_list_param_set));
+ chan_list->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
+ chan_list->header.len = cpu_to_le16(
+ sizeof(struct mwifiex_ie_types_chan_list_param_set) -
+ sizeof(struct mwifiex_ie_types_header));
+ chan_list->chan_scan_param[0].chan_number =
+ bss_desc->bcn_ht_info->control_chan;
+ chan_list->chan_scan_param[0].radio_type =
+ mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
+
+ if ((sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ && (bss_desc->bcn_ht_info->ht_param &
+ IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
+ SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
+ radio_type,
+ (bss_desc->bcn_ht_info->ht_param &
+ IEEE80211_HT_PARAM_CHA_SEC_OFFSET));
+
+ *buffer += sizeof(struct mwifiex_ie_types_chan_list_param_set);
+ ret_len += sizeof(struct mwifiex_ie_types_chan_list_param_set);
+ }
+
+ if (bss_desc->bcn_bss_co_2040) {
+ bss_co_2040 = (struct mwifiex_ie_types_2040bssco *) *buffer;
+ memset(bss_co_2040, 0,
+ sizeof(struct mwifiex_ie_types_2040bssco));
+ bss_co_2040->header.type = cpu_to_le16(WLAN_EID_BSS_COEX_2040);
+ bss_co_2040->header.len =
+ cpu_to_le16(sizeof(bss_co_2040->bss_co_2040));
+
+ memcpy((u8 *) bss_co_2040 +
+ sizeof(struct mwifiex_ie_types_header),
+ (u8 *) bss_desc->bcn_bss_co_2040 +
+ sizeof(struct ieee_types_header),
+ le16_to_cpu(bss_co_2040->header.len));
+
+ *buffer += sizeof(struct mwifiex_ie_types_2040bssco);
+ ret_len += sizeof(struct mwifiex_ie_types_2040bssco);
+ }
+
+ if (bss_desc->bcn_ext_cap) {
+ ext_cap = (struct mwifiex_ie_types_extcap *) *buffer;
+ memset(ext_cap, 0, sizeof(struct mwifiex_ie_types_extcap));
+ ext_cap->header.type = cpu_to_le16(WLAN_EID_EXT_CAPABILITY);
+ ext_cap->header.len = cpu_to_le16(sizeof(ext_cap->ext_cap));
+
+ memcpy((u8 *) ext_cap +
+ sizeof(struct mwifiex_ie_types_header),
+ (u8 *) bss_desc->bcn_ext_cap +
+ sizeof(struct ieee_types_header),
+ le16_to_cpu(ext_cap->header.len));
+
+ *buffer += sizeof(struct mwifiex_ie_types_extcap);
+ ret_len += sizeof(struct mwifiex_ie_types_extcap);
+ }
+
+ return ret_len;
+}
+
+/*
+ * This function reconfigures the Tx buffer size in firmware.
+ *
+ * This function prepares a firmware command and issues it, if
+ * the current Tx buffer size is different from the one requested.
+ * Maximum configurable Tx buffer size is limited by the HT capability
+ * field value.
+ */
+void
+mwifiex_cfg_tx_buf(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ u16 max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+ u16 tx_buf, curr_tx_buf_size = 0;
+
+ if (bss_desc->bcn_ht_cap) {
+ if (le16_to_cpu(bss_desc->bcn_ht_cap->cap_info) &
+ IEEE80211_HT_CAP_MAX_AMSDU)
+ max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_8K;
+ else
+ max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_4K;
+ }
+
+ tx_buf = min(priv->adapter->max_tx_buf_size, max_amsdu);
+
+ dev_dbg(priv->adapter->dev, "info: max_amsdu=%d, max_tx_buf=%d\n",
+ max_amsdu, priv->adapter->max_tx_buf_size);
+
+ if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_2K)
+ curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+ else if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_4K)
+ curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
+ else if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_8K)
+ curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_8K;
+ if (curr_tx_buf_size != tx_buf)
+ mwifiex_send_cmd_async(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF,
+ HostCmd_ACT_GEN_SET, 0, &tx_buf);
+}
+
+/*
+ * This function checks if the given pointer is valid entry of
+ * Tx BA Stream table.
+ */
+static int mwifiex_is_tx_ba_stream_ptr_valid(struct mwifiex_private *priv,
+ struct mwifiex_tx_ba_stream_tbl *tx_tbl_ptr)
+{
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl;
+
+ list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) {
+ if (tx_ba_tsr_tbl == tx_tbl_ptr)
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * This function deletes the given entry in Tx BA Stream table.
+ *
+ * The function also performs a validity check on the supplied
+ * pointer before trying to delete.
+ */
+void mwifiex_11n_delete_tx_ba_stream_tbl_entry(struct mwifiex_private *priv,
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl)
+{
+ if (!tx_ba_tsr_tbl &&
+ mwifiex_is_tx_ba_stream_ptr_valid(priv, tx_ba_tsr_tbl))
+ return;
+
+ dev_dbg(priv->adapter->dev, "info: tx_ba_tsr_tbl %p\n", tx_ba_tsr_tbl);
+
+ list_del(&tx_ba_tsr_tbl->list);
+
+ kfree(tx_ba_tsr_tbl);
+}
+
+/*
+ * This function deletes all the entries in Tx BA Stream table.
+ */
+void mwifiex_11n_delete_all_tx_ba_stream_tbl(struct mwifiex_private *priv)
+{
+ int i;
+ struct mwifiex_tx_ba_stream_tbl *del_tbl_ptr, *tmp_node;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ list_for_each_entry_safe(del_tbl_ptr, tmp_node,
+ &priv->tx_ba_stream_tbl_ptr, list)
+ mwifiex_11n_delete_tx_ba_stream_tbl_entry(priv, del_tbl_ptr);
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+
+ INIT_LIST_HEAD(&priv->tx_ba_stream_tbl_ptr);
+
+ for (i = 0; i < MAX_NUM_TID; ++i)
+ priv->aggr_prio_tbl[i].ampdu_ap =
+ priv->aggr_prio_tbl[i].ampdu_user;
+}
+
+/*
+ * This function returns the pointer to an entry in BA Stream
+ * table which matches the given RA/TID pair.
+ */
+struct mwifiex_tx_ba_stream_tbl *
+mwifiex_11n_get_tx_ba_stream_tbl(struct mwifiex_private *priv,
+ int tid, u8 *ra)
+{
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) {
+ if ((!memcmp(tx_ba_tsr_tbl->ra, ra, ETH_ALEN))
+ && (tx_ba_tsr_tbl->tid == tid)) {
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock,
+ flags);
+ return tx_ba_tsr_tbl;
+ }
+ }
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+ return NULL;
+}
+
+/*
+ * This function creates an entry in Tx BA stream table for the
+ * given RA/TID pair.
+ */
+void mwifiex_11n_create_tx_ba_stream_tbl(struct mwifiex_private *priv,
+ u8 *ra, int tid,
+ enum mwifiex_ba_status ba_status)
+{
+ struct mwifiex_tx_ba_stream_tbl *new_node;
+ unsigned long flags;
+
+ if (!mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, ra)) {
+ new_node = kzalloc(sizeof(struct mwifiex_tx_ba_stream_tbl),
+ GFP_ATOMIC);
+ if (!new_node) {
+ dev_err(priv->adapter->dev,
+ "%s: failed to alloc new_node\n", __func__);
+ return;
+ }
+
+ INIT_LIST_HEAD(&new_node->list);
+
+ new_node->tid = tid;
+ new_node->ba_status = ba_status;
+ memcpy(new_node->ra, ra, ETH_ALEN);
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ list_add_tail(&new_node->list, &priv->tx_ba_stream_tbl_ptr);
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+ }
+}
+
+/*
+ * This function sends an add BA request to the given TID/RA pair.
+ */
+int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac)
+{
+ struct host_cmd_ds_11n_addba_req add_ba_req;
+ static u8 dialog_tok;
+ int ret;
+
+ dev_dbg(priv->adapter->dev, "cmd: %s: tid %d\n", __func__, tid);
+
+ add_ba_req.block_ack_param_set = cpu_to_le16(
+ (u16) ((tid << BLOCKACKPARAM_TID_POS) |
+ (priv->add_ba_param.
+ tx_win_size << BLOCKACKPARAM_WINSIZE_POS) |
+ IMMEDIATE_BLOCK_ACK));
+ add_ba_req.block_ack_tmo = cpu_to_le16((u16)priv->add_ba_param.timeout);
+
+ ++dialog_tok;
+
+ if (dialog_tok == 0)
+ dialog_tok = 1;
+
+ add_ba_req.dialog_token = dialog_tok;
+ memcpy(&add_ba_req.peer_mac_addr, peer_mac, ETH_ALEN);
+
+ /* We don't wait for the response of this command */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_ADDBA_REQ,
+ 0, 0, &add_ba_req);
+
+ return ret;
+}
+
+/*
+ * This function sends a delete BA request to the given TID/RA pair.
+ */
+int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac,
+ int initiator)
+{
+ struct host_cmd_ds_11n_delba delba;
+ int ret;
+ uint16_t del_ba_param_set;
+
+ memset(&delba, 0, sizeof(delba));
+ delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS);
+
+ del_ba_param_set = le16_to_cpu(delba.del_ba_param_set);
+ if (initiator)
+ del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK;
+ else
+ del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK;
+
+ memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN);
+
+ /* We don't wait for the response of this command */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_DELBA,
+ HostCmd_ACT_GEN_SET, 0, &delba);
+
+ return ret;
+}
+
+/*
+ * This function handles the command response of a delete BA request.
+ */
+void mwifiex_11n_delete_ba_stream(struct mwifiex_private *priv, u8 *del_ba)
+{
+ struct host_cmd_ds_11n_delba *cmd_del_ba =
+ (struct host_cmd_ds_11n_delba *) del_ba;
+ uint16_t del_ba_param_set = le16_to_cpu(cmd_del_ba->del_ba_param_set);
+ int tid;
+
+ tid = del_ba_param_set >> DELBA_TID_POS;
+
+ mwifiex_11n_delete_ba_stream_tbl(priv, tid, cmd_del_ba->peer_mac_addr,
+ TYPE_DELBA_RECEIVE,
+ INITIATOR_BIT(del_ba_param_set));
+}
+
+/*
+ * This function retrieves the Rx reordering table.
+ */
+int mwifiex_get_rx_reorder_tbl(struct mwifiex_private *priv,
+ struct mwifiex_ds_rx_reorder_tbl *buf)
+{
+ int i;
+ struct mwifiex_ds_rx_reorder_tbl *rx_reo_tbl = buf;
+ struct mwifiex_rx_reorder_tbl *rx_reorder_tbl_ptr;
+ int count = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+ list_for_each_entry(rx_reorder_tbl_ptr, &priv->rx_reorder_tbl_ptr,
+ list) {
+ rx_reo_tbl->tid = (u16) rx_reorder_tbl_ptr->tid;
+ memcpy(rx_reo_tbl->ta, rx_reorder_tbl_ptr->ta, ETH_ALEN);
+ rx_reo_tbl->start_win = rx_reorder_tbl_ptr->start_win;
+ rx_reo_tbl->win_size = rx_reorder_tbl_ptr->win_size;
+ for (i = 0; i < rx_reorder_tbl_ptr->win_size; ++i) {
+ if (rx_reorder_tbl_ptr->rx_reorder_ptr[i])
+ rx_reo_tbl->buffer[i] = true;
+ else
+ rx_reo_tbl->buffer[i] = false;
+ }
+ rx_reo_tbl++;
+ count++;
+
+ if (count >= MWIFIEX_MAX_RX_BASTREAM_SUPPORTED)
+ break;
+ }
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+
+ return count;
+}
+
+/*
+ * This function retrieves the Tx BA stream table.
+ */
+int mwifiex_get_tx_ba_stream_tbl(struct mwifiex_private *priv,
+ struct mwifiex_ds_tx_ba_stream_tbl *buf)
+{
+ struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl;
+ struct mwifiex_ds_tx_ba_stream_tbl *rx_reo_tbl = buf;
+ int count = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) {
+ rx_reo_tbl->tid = (u16) tx_ba_tsr_tbl->tid;
+ dev_dbg(priv->adapter->dev, "data: %s tid=%d\n",
+ __func__, rx_reo_tbl->tid);
+ memcpy(rx_reo_tbl->ra, tx_ba_tsr_tbl->ra, ETH_ALEN);
+ rx_reo_tbl++;
+ count++;
+ if (count >= MWIFIEX_MAX_TX_BASTREAM_SUPPORTED)
+ break;
+ }
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+
+ return count;
+}
diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h
new file mode 100644
index 0000000..a4390a1
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11n.h
@@ -0,0 +1,161 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11n
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_11N_H_
+#define _MWIFIEX_11N_H_
+
+#include "11n_aggr.h"
+#include "11n_rxreorder.h"
+#include "wmm.h"
+
+int mwifiex_ret_11n_delba(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+int mwifiex_ret_11n_cfg(struct host_cmd_ds_command *resp,
+ void *data_buf);
+int mwifiex_cmd_11n_cfg(struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf);
+
+int mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc,
+ u8 **buffer);
+void mwifiex_cfg_tx_buf(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc);
+void mwifiex_fill_cap_info(struct mwifiex_private *, u8 radio_type,
+ struct mwifiex_ie_types_htcap *);
+int mwifiex_set_get_11n_htcap_cfg(struct mwifiex_private *priv,
+ u16 action, int *htcap_cfg);
+void mwifiex_11n_delete_tx_ba_stream_tbl_entry(struct mwifiex_private *priv,
+ struct mwifiex_tx_ba_stream_tbl
+ *tx_tbl);
+void mwifiex_11n_delete_all_tx_ba_stream_tbl(struct mwifiex_private *priv);
+struct mwifiex_tx_ba_stream_tbl *mwifiex_11n_get_tx_ba_stream_tbl(struct
+ mwifiex_private
+ *priv, int tid,
+ u8 *ra);
+void mwifiex_11n_create_tx_ba_stream_tbl(struct mwifiex_private *priv, u8 *ra,
+ int tid,
+ enum mwifiex_ba_status ba_status);
+int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac);
+int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac,
+ int initiator);
+void mwifiex_11n_delete_ba_stream(struct mwifiex_private *priv, u8 *del_ba);
+int mwifiex_get_rx_reorder_tbl(struct mwifiex_private *priv,
+ struct mwifiex_ds_rx_reorder_tbl *buf);
+int mwifiex_get_tx_ba_stream_tbl(struct mwifiex_private *priv,
+ struct mwifiex_ds_tx_ba_stream_tbl *buf);
+int mwifiex_ret_amsdu_aggr_ctrl(struct host_cmd_ds_command *resp,
+ void *data_buf);
+int mwifiex_cmd_recfg_tx_buf(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ int cmd_action, void *data_buf);
+int mwifiex_cmd_amsdu_aggr_ctrl(struct host_cmd_ds_command *cmd,
+ int cmd_action, void *data_buf);
+
+/*
+ * This function checks whether AMPDU is allowed or not for a particular TID.
+ */
+static inline u8
+mwifiex_is_ampdu_allowed(struct mwifiex_private *priv, int tid)
+{
+ return ((priv->aggr_prio_tbl[tid].ampdu_ap != BA_STREAM_NOT_ALLOWED)
+ ? true : false);
+}
+
+/*
+ * This function checks whether AMSDU is allowed or not for a particular TID.
+ */
+static inline u8
+mwifiex_is_amsdu_allowed(struct mwifiex_private *priv, int tid)
+{
+ return (((priv->aggr_prio_tbl[tid].amsdu != BA_STREAM_NOT_ALLOWED)
+ && ((priv->is_data_rate_auto)
+ || !((priv->bitmap_rates[2]) & 0x03)))
+ ? true : false);
+}
+
+/*
+ * This function checks whether a space is available for new BA stream or not.
+ */
+static inline u8 mwifiex_space_avail_for_new_ba_stream(
+ struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_private *priv;
+ u8 i;
+ u32 ba_stream_num = 0;
+
+ for (i = 0; i < adapter->priv_num; i++) {
+ priv = adapter->priv[i];
+ if (priv)
+ ba_stream_num += mwifiex_wmm_list_len(
+ (struct list_head *)
+ &priv->tx_ba_stream_tbl_ptr);
+ }
+
+ return ((ba_stream_num <
+ MWIFIEX_MAX_TX_BASTREAM_SUPPORTED) ? true : false);
+}
+
+/*
+ * This function finds the correct Tx BA stream to delete.
+ *
+ * Upon successfully locating, both the TID and the RA are returned.
+ */
+static inline u8
+mwifiex_find_stream_to_delete(struct mwifiex_private *priv, int ptr_tid,
+ int *ptid, u8 *ra)
+{
+ int tid;
+ u8 ret = false;
+ struct mwifiex_tx_ba_stream_tbl *tx_tbl;
+ unsigned long flags;
+
+ tid = priv->aggr_prio_tbl[ptr_tid].ampdu_user;
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ list_for_each_entry(tx_tbl, &priv->tx_ba_stream_tbl_ptr, list) {
+ if (tid > priv->aggr_prio_tbl[tx_tbl->tid].ampdu_user) {
+ tid = priv->aggr_prio_tbl[tx_tbl->tid].ampdu_user;
+ *ptid = tx_tbl->tid;
+ memcpy(ra, tx_tbl->ra, ETH_ALEN);
+ ret = true;
+ }
+ }
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+
+ return ret;
+}
+
+/*
+ * This function checks whether BA stream is set up or not.
+ */
+static inline int
+mwifiex_is_ba_stream_setup(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ptr, int tid)
+{
+ struct mwifiex_tx_ba_stream_tbl *tx_tbl;
+
+ tx_tbl = mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, ptr->ra);
+ if (tx_tbl && IS_BASTREAM_SETUP(tx_tbl))
+ return true;
+
+ return false;
+}
+#endif /* !_MWIFIEX_11N_H_ */
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
new file mode 100644
index 0000000..d3d5e08
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -0,0 +1,298 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11n Aggregation
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+#include "11n_aggr.h"
+
+/*
+ * Creates an AMSDU subframe for aggregation into one AMSDU packet.
+ *
+ * The resultant AMSDU subframe format is -
+ *
+ * +---- ~ -----+---- ~ ------+---- ~ -----+----- ~ -----+---- ~ -----+
+ * | DA | SA | Length | SNAP header | MSDU |
+ * | data[0..5] | data[6..11] | | | data[14..] |
+ * +---- ~ -----+---- ~ ------+---- ~ -----+----- ~ -----+---- ~ -----+
+ * <--6-bytes--> <--6-bytes--> <--2-bytes--><--8-bytes--> <--n-bytes-->
+ *
+ * This function also computes the amount of padding required to make the
+ * buffer length multiple of 4 bytes.
+ *
+ * Data => |DA|SA|SNAP-TYPE|........ .|
+ * MSDU => |DA|SA|Length|SNAP|...... ..|
+ */
+static int
+mwifiex_11n_form_amsdu_pkt(struct sk_buff *skb_aggr,
+ struct sk_buff *skb_src, int *pad)
+
+{
+ int dt_offset;
+ struct rfc_1042_hdr snap = {
+ 0xaa, /* LLC DSAP */
+ 0xaa, /* LLC SSAP */
+ 0x03, /* LLC CTRL */
+ {0x00, 0x00, 0x00}, /* SNAP OUI */
+ 0x0000 /* SNAP type */
+ /*
+ * This field will be overwritten
+ * later with ethertype
+ */
+ };
+ struct tx_packet_hdr *tx_header;
+
+ skb_put(skb_aggr, sizeof(*tx_header));
+
+ tx_header = (struct tx_packet_hdr *) skb_aggr->data;
+
+ /* Copy DA and SA */
+ dt_offset = 2 * ETH_ALEN;
+ memcpy(&tx_header->eth803_hdr, skb_src->data, dt_offset);
+
+ /* Copy SNAP header */
+ snap.snap_type = *(u16 *) ((u8 *)skb_src->data + dt_offset);
+ dt_offset += sizeof(u16);
+
+ memcpy(&tx_header->rfc1042_hdr, &snap, sizeof(struct rfc_1042_hdr));
+
+ skb_pull(skb_src, dt_offset);
+
+ /* Update Length field */
+ tx_header->eth803_hdr.h_proto = htons(skb_src->len + LLC_SNAP_LEN);
+
+ /* Add payload */
+ skb_put(skb_aggr, skb_src->len);
+ memcpy(skb_aggr->data + sizeof(*tx_header), skb_src->data,
+ skb_src->len);
+ *pad = (((skb_src->len + LLC_SNAP_LEN) & 3)) ? (4 - (((skb_src->len +
+ LLC_SNAP_LEN)) & 3)) : 0;
+ skb_put(skb_aggr, *pad);
+
+ return skb_aggr->len + *pad;
+}
+
+/*
+ * Adds TxPD to AMSDU header.
+ *
+ * Each AMSDU packet will contain one TxPD at the beginning,
+ * followed by multiple AMSDU subframes.
+ */
+static void
+mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv,
+ struct sk_buff *skb)
+{
+ struct txpd *local_tx_pd;
+
+ skb_push(skb, sizeof(*local_tx_pd));
+
+ local_tx_pd = (struct txpd *) skb->data;
+ memset(local_tx_pd, 0, sizeof(struct txpd));
+
+ /* Original priority has been overwritten */
+ local_tx_pd->priority = (u8) skb->priority;
+ local_tx_pd->pkt_delay_2ms =
+ mwifiex_wmm_compute_drv_pkt_delay(priv, skb);
+ local_tx_pd->bss_num = priv->bss_num;
+ local_tx_pd->bss_type = priv->bss_type;
+ /* Always zero as the data is followed by struct txpd */
+ local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd));
+ local_tx_pd->tx_pkt_type = cpu_to_le16(PKT_TYPE_AMSDU);
+ local_tx_pd->tx_pkt_length = cpu_to_le16(skb->len -
+ sizeof(*local_tx_pd));
+
+ if (local_tx_pd->tx_control == 0)
+ /* TxCtrl set by user or default */
+ local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
+
+ if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
+ (priv->adapter->pps_uapsd_mode)) {
+ if (true == mwifiex_check_last_packet_indication(priv)) {
+ priv->adapter->tx_lock_flag = true;
+ local_tx_pd->flags =
+ MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET;
+ }
+ }
+}
+
+/*
+ * Create aggregated packet.
+ *
+ * This function creates an aggregated MSDU packet, by combining buffers
+ * from the RA list. Each individual buffer is encapsulated as an AMSDU
+ * subframe and all such subframes are concatenated together to form the
+ * AMSDU packet.
+ *
+ * A TxPD is also added to the front of the resultant AMSDU packets for
+ * transmission. The resultant packets format is -
+ *
+ * +---- ~ ----+------ ~ ------+------ ~ ------+-..-+------ ~ ------+
+ * | TxPD |AMSDU sub-frame|AMSDU sub-frame| .. |AMSDU sub-frame|
+ * | | 1 | 2 | .. | n |
+ * +---- ~ ----+------ ~ ------+------ ~ ------+ .. +------ ~ ------+
+ */
+int
+mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *pra_list, int headroom,
+ int ptrindex, unsigned long ra_list_flags)
+ __releases(&priv->wmm.ra_list_spinlock)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct sk_buff *skb_aggr, *skb_src;
+ struct mwifiex_txinfo *tx_info_aggr, *tx_info_src;
+ int pad = 0, ret;
+ struct mwifiex_tx_param tx_param;
+ struct txpd *ptx_pd = NULL;
+
+ if (skb_queue_empty(&pra_list->skb_head)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ return 0;
+ }
+ skb_src = skb_peek(&pra_list->skb_head);
+ tx_info_src = MWIFIEX_SKB_TXCB(skb_src);
+ skb_aggr = dev_alloc_skb(adapter->tx_buf_size);
+ if (!skb_aggr) {
+ dev_err(adapter->dev, "%s: alloc skb_aggr\n", __func__);
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ return -1;
+ }
+ skb_reserve(skb_aggr, headroom + sizeof(struct txpd));
+ tx_info_aggr = MWIFIEX_SKB_TXCB(skb_aggr);
+
+ tx_info_aggr->bss_index = tx_info_src->bss_index;
+ skb_aggr->priority = skb_src->priority;
+
+ while (skb_src && ((skb_headroom(skb_aggr) + skb_src->len
+ + LLC_SNAP_LEN)
+ <= adapter->tx_buf_size)) {
+
+ if (!skb_queue_empty(&pra_list->skb_head))
+ skb_src = skb_dequeue(&pra_list->skb_head);
+ else
+ skb_src = NULL;
+
+ if (skb_src)
+ pra_list->total_pkts_size -= skb_src->len;
+
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ mwifiex_11n_form_amsdu_pkt(skb_aggr, skb_src, &pad);
+
+ mwifiex_write_data_complete(adapter, skb_src, 0);
+
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+
+ if (!mwifiex_is_ralist_valid(priv, pra_list, ptrindex)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ return -1;
+ }
+
+ if (!skb_queue_empty(&pra_list->skb_head))
+ skb_src = skb_peek(&pra_list->skb_head);
+ else
+ skb_src = NULL;
+ }
+
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, ra_list_flags);
+
+ /* Last AMSDU packet does not need padding */
+ skb_trim(skb_aggr, skb_aggr->len - pad);
+
+ /* Form AMSDU */
+ mwifiex_11n_form_amsdu_txpd(priv, skb_aggr);
+ if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA)
+ ptx_pd = (struct txpd *)skb_aggr->data;
+
+ skb_push(skb_aggr, headroom);
+
+ tx_param.next_pkt_len = ((pra_list->total_pkts_size) ?
+ (((pra_list->total_pkts_size) >
+ adapter->tx_buf_size) ? adapter->
+ tx_buf_size : pra_list->total_pkts_size +
+ LLC_SNAP_LEN + sizeof(struct txpd)) : 0);
+ ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA,
+ skb_aggr->data,
+ skb_aggr->len, &tx_param);
+ switch (ret) {
+ case -EBUSY:
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+ if (!mwifiex_is_ralist_valid(priv, pra_list, ptrindex)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ mwifiex_write_data_complete(adapter, skb_aggr, -1);
+ return -1;
+ }
+ if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
+ (adapter->pps_uapsd_mode) &&
+ (adapter->tx_lock_flag)) {
+ priv->adapter->tx_lock_flag = false;
+ if (ptx_pd)
+ ptx_pd->flags = 0;
+ }
+
+ skb_queue_tail(&pra_list->skb_head, skb_aggr);
+
+ pra_list->total_pkts_size += skb_aggr->len;
+
+ tx_info_aggr->flags |= MWIFIEX_BUF_FLAG_REQUEUED_PKT;
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ dev_dbg(adapter->dev, "data: -EBUSY is returned\n");
+ break;
+ case -1:
+ adapter->data_sent = false;
+ dev_err(adapter->dev, "%s: host_to_card failed: %#x\n",
+ __func__, ret);
+ adapter->dbg.num_tx_host_to_card_failure++;
+ mwifiex_write_data_complete(adapter, skb_aggr, ret);
+ return 0;
+ case -EINPROGRESS:
+ adapter->data_sent = false;
+ break;
+ case 0:
+ mwifiex_write_data_complete(adapter, skb_aggr, ret);
+ break;
+ default:
+ break;
+ }
+ if (ret != -EBUSY) {
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+ if (mwifiex_is_ralist_valid(priv, pra_list, ptrindex)) {
+ priv->wmm.packets_out[ptrindex]++;
+ priv->wmm.tid_tbl_ptr[ptrindex].ra_list_curr = pra_list;
+ }
+ /* Now bss_prio_cur pointer points to next node */
+ adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur =
+ list_first_entry(
+ &adapter->bss_prio_tbl[priv->bss_priority]
+ .bss_prio_cur->list,
+ struct mwifiex_bss_prio_node, list);
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.h b/drivers/net/wireless/mwifiex/11n_aggr.h
new file mode 100644
index 0000000..9c6dca7
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11n_aggr.h
@@ -0,0 +1,32 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11n Aggregation
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_11N_AGGR_H_
+#define _MWIFIEX_11N_AGGR_H_
+
+#define PKT_TYPE_AMSDU 0xE6
+
+int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv,
+ struct sk_buff *skb);
+int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ptr, int headroom,
+ int ptr_index, unsigned long flags)
+ __releases(&priv->wmm.ra_list_spinlock);
+
+#endif /* !_MWIFIEX_11N_AGGR_H_ */
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
new file mode 100644
index 0000000..e5dfdc3
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -0,0 +1,616 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11n RX Re-ordering
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+#include "11n_rxreorder.h"
+
+/*
+ * This function dispatches all packets in the Rx reorder table.
+ *
+ * There could be holes in the buffer, which are skipped by the function.
+ * Since the buffer is linear, the function uses rotation to simulate
+ * circular buffer.
+ */
+static int
+mwifiex_11n_dispatch_pkt_until_start_win(struct mwifiex_private *priv,
+ struct mwifiex_rx_reorder_tbl
+ *rx_reor_tbl_ptr, int start_win)
+{
+ int no_pkt_to_send, i;
+ void *rx_tmp_ptr;
+ unsigned long flags;
+
+ no_pkt_to_send = (start_win > rx_reor_tbl_ptr->start_win) ?
+ min((start_win - rx_reor_tbl_ptr->start_win),
+ rx_reor_tbl_ptr->win_size) : rx_reor_tbl_ptr->win_size;
+
+ for (i = 0; i < no_pkt_to_send; ++i) {
+ spin_lock_irqsave(&priv->rx_pkt_lock, flags);
+ rx_tmp_ptr = NULL;
+ if (rx_reor_tbl_ptr->rx_reorder_ptr[i]) {
+ rx_tmp_ptr = rx_reor_tbl_ptr->rx_reorder_ptr[i];
+ rx_reor_tbl_ptr->rx_reorder_ptr[i] = NULL;
+ }
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+ if (rx_tmp_ptr)
+ mwifiex_process_rx_packet(priv->adapter, rx_tmp_ptr);
+ }
+
+ spin_lock_irqsave(&priv->rx_pkt_lock, flags);
+ /*
+ * We don't have a circular buffer, hence use rotation to simulate
+ * circular buffer
+ */
+ for (i = 0; i < rx_reor_tbl_ptr->win_size - no_pkt_to_send; ++i) {
+ rx_reor_tbl_ptr->rx_reorder_ptr[i] =
+ rx_reor_tbl_ptr->rx_reorder_ptr[no_pkt_to_send + i];
+ rx_reor_tbl_ptr->rx_reorder_ptr[no_pkt_to_send + i] = NULL;
+ }
+
+ rx_reor_tbl_ptr->start_win = start_win;
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+
+ return 0;
+}
+
+/*
+ * This function dispatches all packets in the Rx reorder table until
+ * a hole is found.
+ *
+ * The start window is adjusted automatically when a hole is located.
+ * Since the buffer is linear, the function uses rotation to simulate
+ * circular buffer.
+ */
+static int
+mwifiex_11n_scan_and_dispatch(struct mwifiex_private *priv,
+ struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr)
+{
+ int i, j, xchg;
+ void *rx_tmp_ptr;
+ unsigned long flags;
+
+ for (i = 0; i < rx_reor_tbl_ptr->win_size; ++i) {
+ spin_lock_irqsave(&priv->rx_pkt_lock, flags);
+ if (!rx_reor_tbl_ptr->rx_reorder_ptr[i]) {
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+ break;
+ }
+ rx_tmp_ptr = rx_reor_tbl_ptr->rx_reorder_ptr[i];
+ rx_reor_tbl_ptr->rx_reorder_ptr[i] = NULL;
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+ mwifiex_process_rx_packet(priv->adapter, rx_tmp_ptr);
+ }
+
+ spin_lock_irqsave(&priv->rx_pkt_lock, flags);
+ /*
+ * We don't have a circular buffer, hence use rotation to simulate
+ * circular buffer
+ */
+ if (i > 0) {
+ xchg = rx_reor_tbl_ptr->win_size - i;
+ for (j = 0; j < xchg; ++j) {
+ rx_reor_tbl_ptr->rx_reorder_ptr[j] =
+ rx_reor_tbl_ptr->rx_reorder_ptr[i + j];
+ rx_reor_tbl_ptr->rx_reorder_ptr[i + j] = NULL;
+ }
+ }
+ rx_reor_tbl_ptr->start_win = (rx_reor_tbl_ptr->start_win + i)
+ &(MAX_TID_VALUE - 1);
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+ return 0;
+}
+
+/*
+ * This function deletes the Rx reorder table and frees the memory.
+ *
+ * The function stops the associated timer and dispatches all the
+ * pending packets in the Rx reorder table before deletion.
+ */
+static void
+mwifiex_11n_delete_rx_reorder_tbl_entry(struct mwifiex_private *priv,
+ struct mwifiex_rx_reorder_tbl
+ *rx_reor_tbl_ptr)
+{
+ unsigned long flags;
+
+ if (!rx_reor_tbl_ptr)
+ return;
+
+ mwifiex_11n_dispatch_pkt_until_start_win(priv, rx_reor_tbl_ptr,
+ (rx_reor_tbl_ptr->start_win +
+ rx_reor_tbl_ptr->win_size)
+ &(MAX_TID_VALUE - 1));
+
+ del_timer(&rx_reor_tbl_ptr->timer_context.timer);
+
+ spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+ list_del(&rx_reor_tbl_ptr->list);
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+
+ kfree(rx_reor_tbl_ptr->rx_reorder_ptr);
+ kfree(rx_reor_tbl_ptr);
+}
+
+/*
+ * This function returns the pointer to an entry in Rx reordering
+ * table which matches the given TA/TID pair.
+ */
+static struct mwifiex_rx_reorder_tbl *
+mwifiex_11n_get_rx_reorder_tbl(struct mwifiex_private *priv, int tid, u8 *ta)
+{
+ struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+ list_for_each_entry(rx_reor_tbl_ptr, &priv->rx_reorder_tbl_ptr, list) {
+ if ((!memcmp(rx_reor_tbl_ptr->ta, ta, ETH_ALEN))
+ && (rx_reor_tbl_ptr->tid == tid)) {
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
+ flags);
+ return rx_reor_tbl_ptr;
+ }
+ }
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+
+ return NULL;
+}
+
+/*
+ * This function finds the last sequence number used in the packets
+ * buffered in Rx reordering table.
+ */
+static int
+mwifiex_11n_find_last_seq_num(struct mwifiex_rx_reorder_tbl *rx_reorder_tbl_ptr)
+{
+ int i;
+
+ for (i = (rx_reorder_tbl_ptr->win_size - 1); i >= 0; --i)
+ if (rx_reorder_tbl_ptr->rx_reorder_ptr[i])
+ return i;
+
+ return -1;
+}
+
+/*
+ * This function flushes all the packets in Rx reordering table.
+ *
+ * The function checks if any packets are currently buffered in the
+ * table or not. In case there are packets available, it dispatches
+ * them and then dumps the Rx reordering table.
+ */
+static void
+mwifiex_flush_data(unsigned long context)
+{
+ struct reorder_tmr_cnxt *reorder_cnxt =
+ (struct reorder_tmr_cnxt *) context;
+ int start_win;
+
+ start_win = mwifiex_11n_find_last_seq_num(reorder_cnxt->ptr);
+ if (start_win >= 0) {
+ dev_dbg(reorder_cnxt->priv->adapter->dev,
+ "info: flush data %d\n", start_win);
+ mwifiex_11n_dispatch_pkt_until_start_win(reorder_cnxt->priv,
+ reorder_cnxt->ptr,
+ ((reorder_cnxt->ptr->start_win +
+ start_win + 1) & (MAX_TID_VALUE - 1)));
+ }
+}
+
+/*
+ * This function creates an entry in Rx reordering table for the
+ * given TA/TID.
+ *
+ * The function also initializes the entry with sequence number, window
+ * size as well as initializes the timer.
+ *
+ * If the received TA/TID pair is already present, all the packets are
+ * dispatched and the window size is moved until the SSN.
+ */
+static void
+mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta,
+ int tid, int win_size, int seq_num)
+{
+ int i;
+ struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr, *new_node;
+ u16 last_seq = 0;
+ unsigned long flags;
+
+ /*
+ * If we get a TID, ta pair which is already present dispatch all the
+ * the packets and move the window size until the ssn
+ */
+ rx_reor_tbl_ptr = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
+ if (rx_reor_tbl_ptr) {
+ mwifiex_11n_dispatch_pkt_until_start_win(priv, rx_reor_tbl_ptr,
+ seq_num);
+ return;
+ }
+ /* if !rx_reor_tbl_ptr then create one */
+ new_node = kzalloc(sizeof(struct mwifiex_rx_reorder_tbl), GFP_KERNEL);
+ if (!new_node) {
+ dev_err(priv->adapter->dev, "%s: failed to alloc new_node\n",
+ __func__);
+ return;
+ }
+
+ INIT_LIST_HEAD(&new_node->list);
+ new_node->tid = tid;
+ memcpy(new_node->ta, ta, ETH_ALEN);
+ new_node->start_win = seq_num;
+ if (mwifiex_queuing_ra_based(priv))
+ /* TODO for adhoc */
+ dev_dbg(priv->adapter->dev,
+ "info: ADHOC:last_seq=%d start_win=%d\n",
+ last_seq, new_node->start_win);
+ else
+ last_seq = priv->rx_seq[tid];
+
+ if (last_seq >= new_node->start_win)
+ new_node->start_win = last_seq + 1;
+
+ new_node->win_size = win_size;
+
+ new_node->rx_reorder_ptr = kzalloc(sizeof(void *) * win_size,
+ GFP_KERNEL);
+ if (!new_node->rx_reorder_ptr) {
+ kfree((u8 *) new_node);
+ dev_err(priv->adapter->dev,
+ "%s: failed to alloc reorder_ptr\n", __func__);
+ return;
+ }
+
+ new_node->timer_context.ptr = new_node;
+ new_node->timer_context.priv = priv;
+
+ init_timer(&new_node->timer_context.timer);
+ new_node->timer_context.timer.function = mwifiex_flush_data;
+ new_node->timer_context.timer.data =
+ (unsigned long) &new_node->timer_context;
+
+ for (i = 0; i < win_size; ++i)
+ new_node->rx_reorder_ptr[i] = NULL;
+
+ spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+ list_add_tail(&new_node->list, &priv->rx_reorder_tbl_ptr);
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+}
+
+/*
+ * This function prepares command for adding a BA request.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Setting add BA request buffer
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_11n_addba_req(struct host_cmd_ds_command *cmd, void *data_buf)
+{
+ struct host_cmd_ds_11n_addba_req *add_ba_req =
+ (struct host_cmd_ds_11n_addba_req *)
+ &cmd->params.add_ba_req;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_11N_ADDBA_REQ);
+ cmd->size = cpu_to_le16(sizeof(*add_ba_req) + S_DS_GEN);
+ memcpy(add_ba_req, data_buf, sizeof(*add_ba_req));
+
+ return 0;
+}
+
+/*
+ * This function prepares command for adding a BA response.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Setting add BA response buffer
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ void *data_buf)
+{
+ struct host_cmd_ds_11n_addba_rsp *add_ba_rsp =
+ (struct host_cmd_ds_11n_addba_rsp *)
+ &cmd->params.add_ba_rsp;
+ struct host_cmd_ds_11n_addba_req *cmd_addba_req =
+ (struct host_cmd_ds_11n_addba_req *) data_buf;
+ u8 tid;
+ int win_size;
+ uint16_t block_ack_param_set;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_11N_ADDBA_RSP);
+ cmd->size = cpu_to_le16(sizeof(*add_ba_rsp) + S_DS_GEN);
+
+ memcpy(add_ba_rsp->peer_mac_addr, cmd_addba_req->peer_mac_addr,
+ ETH_ALEN);
+ add_ba_rsp->dialog_token = cmd_addba_req->dialog_token;
+ add_ba_rsp->block_ack_tmo = cmd_addba_req->block_ack_tmo;
+ add_ba_rsp->ssn = cmd_addba_req->ssn;
+
+ block_ack_param_set = le16_to_cpu(cmd_addba_req->block_ack_param_set);
+ tid = (block_ack_param_set & IEEE80211_ADDBA_PARAM_TID_MASK)
+ >> BLOCKACKPARAM_TID_POS;
+ add_ba_rsp->status_code = cpu_to_le16(ADDBA_RSP_STATUS_ACCEPT);
+ block_ack_param_set &= ~IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK;
+ /* We donot support AMSDU inside AMPDU, hence reset the bit */
+ block_ack_param_set &= ~BLOCKACKPARAM_AMSDU_SUPP_MASK;
+ block_ack_param_set |= (priv->add_ba_param.rx_win_size <<
+ BLOCKACKPARAM_WINSIZE_POS);
+ add_ba_rsp->block_ack_param_set = cpu_to_le16(block_ack_param_set);
+ win_size = (le16_to_cpu(add_ba_rsp->block_ack_param_set)
+ & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
+ >> BLOCKACKPARAM_WINSIZE_POS;
+ cmd_addba_req->block_ack_param_set = cpu_to_le16(block_ack_param_set);
+
+ mwifiex_11n_create_rx_reorder_tbl(priv, cmd_addba_req->peer_mac_addr,
+ tid, win_size, le16_to_cpu(cmd_addba_req->ssn));
+ return 0;
+}
+
+/*
+ * This function prepares command for deleting a BA request.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Setting del BA request buffer
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_11n_delba(struct host_cmd_ds_command *cmd, void *data_buf)
+{
+ struct host_cmd_ds_11n_delba *del_ba = (struct host_cmd_ds_11n_delba *)
+ &cmd->params.del_ba;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_11N_DELBA);
+ cmd->size = cpu_to_le16(sizeof(*del_ba) + S_DS_GEN);
+ memcpy(del_ba, data_buf, sizeof(*del_ba));
+
+ return 0;
+}
+
+/*
+ * This function identifies if Rx reordering is needed for a received packet.
+ *
+ * In case reordering is required, the function will do the reordering
+ * before sending it to kernel.
+ *
+ * The Rx reorder table is checked first with the received TID/TA pair. If
+ * not found, the received packet is dispatched immediately. But if found,
+ * the packet is reordered and all the packets in the updated Rx reordering
+ * table is dispatched until a hole is found.
+ *
+ * For sequence number less than the starting window, the packet is dropped.
+ */
+int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv,
+ u16 seq_num, u16 tid,
+ u8 *ta, u8 pkt_type, void *payload)
+{
+ struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr;
+ int start_win, end_win, win_size, ret;
+ u16 pkt_index;
+
+ rx_reor_tbl_ptr =
+ mwifiex_11n_get_rx_reorder_tbl((struct mwifiex_private *) priv,
+ tid, ta);
+ if (!rx_reor_tbl_ptr) {
+ if (pkt_type != PKT_TYPE_BAR)
+ mwifiex_process_rx_packet(priv->adapter, payload);
+ return 0;
+ }
+ start_win = rx_reor_tbl_ptr->start_win;
+ win_size = rx_reor_tbl_ptr->win_size;
+ end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
+ del_timer(&rx_reor_tbl_ptr->timer_context.timer);
+ mod_timer(&rx_reor_tbl_ptr->timer_context.timer, jiffies
+ + (MIN_FLUSH_TIMER_MS * win_size * HZ) / 1000);
+
+ /*
+ * If seq_num is less then starting win then ignore and drop the
+ * packet
+ */
+ if ((start_win + TWOPOW11) > (MAX_TID_VALUE - 1)) {/* Wrap */
+ if (seq_num >= ((start_win + (TWOPOW11)) & (MAX_TID_VALUE - 1))
+ && (seq_num < start_win))
+ return -1;
+ } else if ((seq_num < start_win)
+ || (seq_num > (start_win + (TWOPOW11)))) {
+ return -1;
+ }
+
+ /*
+ * If this packet is a BAR we adjust seq_num as
+ * WinStart = seq_num
+ */
+ if (pkt_type == PKT_TYPE_BAR)
+ seq_num = ((seq_num + win_size) - 1) & (MAX_TID_VALUE - 1);
+
+ if (((end_win < start_win)
+ && (seq_num < (TWOPOW11 - (MAX_TID_VALUE - start_win)))
+ && (seq_num > end_win)) || ((end_win > start_win)
+ && ((seq_num > end_win) || (seq_num < start_win)))) {
+ end_win = seq_num;
+ if (((seq_num - win_size) + 1) >= 0)
+ start_win = (end_win - win_size) + 1;
+ else
+ start_win = (MAX_TID_VALUE - (win_size - seq_num)) + 1;
+ ret = mwifiex_11n_dispatch_pkt_until_start_win(priv,
+ rx_reor_tbl_ptr, start_win);
+
+ if (ret)
+ return ret;
+ }
+
+ if (pkt_type != PKT_TYPE_BAR) {
+ if (seq_num >= start_win)
+ pkt_index = seq_num - start_win;
+ else
+ pkt_index = (seq_num+MAX_TID_VALUE) - start_win;
+
+ if (rx_reor_tbl_ptr->rx_reorder_ptr[pkt_index])
+ return -1;
+
+ rx_reor_tbl_ptr->rx_reorder_ptr[pkt_index] = payload;
+ }
+
+ /*
+ * Dispatch all packets sequentially from start_win until a
+ * hole is found and adjust the start_win appropriately
+ */
+ ret = mwifiex_11n_scan_and_dispatch(priv, rx_reor_tbl_ptr);
+
+ return ret;
+}
+
+/*
+ * This function deletes an entry for a given TID/TA pair.
+ *
+ * The TID/TA are taken from del BA event body.
+ */
+void
+mwifiex_11n_delete_ba_stream_tbl(struct mwifiex_private *priv, int tid,
+ u8 *peer_mac, u8 type, int initiator)
+{
+ struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr;
+ struct mwifiex_tx_ba_stream_tbl *ptx_tbl;
+ u8 cleanup_rx_reorder_tbl;
+ unsigned long flags;
+
+ if (type == TYPE_DELBA_RECEIVE)
+ cleanup_rx_reorder_tbl = (initiator) ? true : false;
+ else
+ cleanup_rx_reorder_tbl = (initiator) ? false : true;
+
+ dev_dbg(priv->adapter->dev, "event: DELBA: %pM tid=%d, "
+ "initiator=%d\n", peer_mac, tid, initiator);
+
+ if (cleanup_rx_reorder_tbl) {
+ rx_reor_tbl_ptr = mwifiex_11n_get_rx_reorder_tbl(priv, tid,
+ peer_mac);
+ if (!rx_reor_tbl_ptr) {
+ dev_dbg(priv->adapter->dev,
+ "event: TID, TA not found in table\n");
+ return;
+ }
+ mwifiex_11n_delete_rx_reorder_tbl_entry(priv, rx_reor_tbl_ptr);
+ } else {
+ ptx_tbl = mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, peer_mac);
+ if (!ptx_tbl) {
+ dev_dbg(priv->adapter->dev,
+ "event: TID, RA not found in table\n");
+ return;
+ }
+
+ spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags);
+ mwifiex_11n_delete_tx_ba_stream_tbl_entry(priv, ptx_tbl);
+ spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags);
+ }
+}
+
+/*
+ * This function handles the command response of an add BA response.
+ *
+ * Handling includes changing the header fields into CPU format and
+ * creating the stream, provided the add BA is accepted.
+ */
+int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct host_cmd_ds_11n_addba_rsp *add_ba_rsp =
+ (struct host_cmd_ds_11n_addba_rsp *)
+ &resp->params.add_ba_rsp;
+ int tid, win_size;
+ struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr;
+ uint16_t block_ack_param_set;
+
+ block_ack_param_set = le16_to_cpu(add_ba_rsp->block_ack_param_set);
+
+ tid = (block_ack_param_set & IEEE80211_ADDBA_PARAM_TID_MASK)
+ >> BLOCKACKPARAM_TID_POS;
+ /*
+ * Check if we had rejected the ADDBA, if yes then do not create
+ * the stream
+ */
+ if (le16_to_cpu(add_ba_rsp->status_code) == BA_RESULT_SUCCESS) {
+ win_size = (block_ack_param_set &
+ IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
+ >> BLOCKACKPARAM_WINSIZE_POS;
+
+ dev_dbg(priv->adapter->dev, "cmd: ADDBA RSP: %pM"
+ " tid=%d ssn=%d win_size=%d\n",
+ add_ba_rsp->peer_mac_addr,
+ tid, add_ba_rsp->ssn, win_size);
+ } else {
+ dev_err(priv->adapter->dev, "ADDBA RSP: failed %pM tid=%d)\n",
+ add_ba_rsp->peer_mac_addr, tid);
+
+ rx_reor_tbl_ptr = mwifiex_11n_get_rx_reorder_tbl(priv,
+ tid, add_ba_rsp->peer_mac_addr);
+ if (rx_reor_tbl_ptr)
+ mwifiex_11n_delete_rx_reorder_tbl_entry(priv,
+ rx_reor_tbl_ptr);
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles BA stream timeout event by preparing and sending
+ * a command to the firmware.
+ */
+void mwifiex_11n_ba_stream_timeout(struct mwifiex_private *priv,
+ struct host_cmd_ds_11n_batimeout *event)
+{
+ struct host_cmd_ds_11n_delba delba;
+
+ memset(&delba, 0, sizeof(struct host_cmd_ds_11n_delba));
+ memcpy(delba.peer_mac_addr, event->peer_mac_addr, ETH_ALEN);
+
+ delba.del_ba_param_set |=
+ cpu_to_le16((u16) event->tid << DELBA_TID_POS);
+ delba.del_ba_param_set |= cpu_to_le16(
+ (u16) event->origninator << DELBA_INITIATOR_POS);
+ delba.reason_code = cpu_to_le16(WLAN_REASON_QSTA_TIMEOUT);
+ mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_DELBA, 0, 0, &delba);
+}
+
+/*
+ * This function cleans up the Rx reorder table by deleting all the entries
+ * and re-initializing.
+ */
+void mwifiex_11n_cleanup_reorder_tbl(struct mwifiex_private *priv)
+{
+ struct mwifiex_rx_reorder_tbl *del_tbl_ptr, *tmp_node;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+ list_for_each_entry_safe(del_tbl_ptr, tmp_node,
+ &priv->rx_reorder_tbl_ptr, list) {
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+ mwifiex_11n_delete_rx_reorder_tbl_entry(priv, del_tbl_ptr);
+ spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+
+ INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
+ memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+}
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h
new file mode 100644
index 0000000..f3ca8c8
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h
@@ -0,0 +1,65 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11n RX Re-ordering
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_11N_RXREORDER_H_
+#define _MWIFIEX_11N_RXREORDER_H_
+
+#define MIN_FLUSH_TIMER_MS 50
+
+#define PKT_TYPE_BAR 0xE7
+#define MAX_TID_VALUE (2 << 11)
+#define TWOPOW11 (2 << 10)
+
+#define BLOCKACKPARAM_TID_POS 2
+#define BLOCKACKPARAM_AMSDU_SUPP_MASK 0x1
+#define BLOCKACKPARAM_WINSIZE_POS 6
+#define DELBA_TID_POS 12
+#define DELBA_INITIATOR_POS 11
+#define TYPE_DELBA_SENT 1
+#define TYPE_DELBA_RECEIVE 2
+#define IMMEDIATE_BLOCK_ACK 0x2
+
+#define ADDBA_RSP_STATUS_ACCEPT 0
+
+int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
+ u16 seqNum,
+ u16 tid, u8 *ta,
+ u8 pkttype, void *payload);
+void mwifiex_11n_delete_ba_stream_tbl(struct mwifiex_private *priv, int Tid,
+ u8 *PeerMACAddr, u8 type,
+ int initiator);
+void mwifiex_11n_ba_stream_timeout(struct mwifiex_private *priv,
+ struct host_cmd_ds_11n_batimeout *event);
+int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv,
+ struct host_cmd_ds_command
+ *resp);
+int mwifiex_cmd_11n_delba(struct host_cmd_ds_command *cmd,
+ void *data_buf);
+int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv,
+ struct host_cmd_ds_command
+ *cmd, void *data_buf);
+int mwifiex_cmd_11n_addba_req(struct host_cmd_ds_command *cmd,
+ void *data_buf);
+void mwifiex_11n_cleanup_reorder_tbl(struct mwifiex_private *priv);
+struct mwifiex_rx_reorder_tbl *mwifiex_11n_get_rxreorder_tbl(struct
+ mwifiex_private
+ *priv, int tid,
+ u8 *ta);
+
+#endif /* _MWIFIEX_11N_RXREORDER_H_ */
diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig
new file mode 100644
index 0000000..8696292
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/Kconfig
@@ -0,0 +1,21 @@
+config MWIFIEX
+ tristate "Marvell WiFi-Ex Driver"
+ depends on CFG80211
+ select LIB80211
+ ---help---
+ This adds support for wireless adapters based on Marvell
+ 802.11n chipsets.
+
+ If you choose to build it as a module, it will be called
+ mwifiex.
+
+config MWIFIEX_SDIO
+ tristate "Marvell WiFi-Ex Driver for SD8787"
+ depends on MWIFIEX && MMC
+ select FW_LOADER
+ ---help---
+ This adds support for wireless adapters based on Marvell
+ 8787 chipset with SDIO interface.
+
+ If you choose to build it as a module, it will be called
+ mwifiex_sdio.
diff --git a/drivers/net/wireless/mwifiex/Makefile b/drivers/net/wireless/mwifiex/Makefile
new file mode 100644
index 0000000..42cb733
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (C) 2011, Marvell International Ltd.
+#
+# This software file (the "File") is distributed by Marvell International
+# Ltd. under the terms of the GNU General Public License Version 2, June 1991
+# (the "License"). You may use, redistribute and/or modify this File in
+# accordance with the terms and conditions of the License, a copy of which
+# is available by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+# worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+#
+# THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+# ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+# this warranty disclaimer.
+
+
+mwifiex-y += main.o
+mwifiex-y += init.o
+mwifiex-y += cfp.o
+mwifiex-y += cmdevt.o
+mwifiex-y += util.o
+mwifiex-y += txrx.o
+mwifiex-y += wmm.o
+mwifiex-y += 11n.o
+mwifiex-y += 11n_aggr.o
+mwifiex-y += 11n_rxreorder.o
+mwifiex-y += scan.o
+mwifiex-y += join.o
+mwifiex-y += sta_ioctl.o
+mwifiex-y += sta_cmd.o
+mwifiex-y += sta_cmdresp.o
+mwifiex-y += sta_event.o
+mwifiex-y += sta_tx.o
+mwifiex-y += sta_rx.o
+mwifiex-y += cfg80211.o
+mwifiex-$(CONFIG_DEBUG_FS) += debugfs.o
+obj-$(CONFIG_MWIFIEX) += mwifiex.o
+
+mwifiex_sdio-y += sdio.o
+obj-$(CONFIG_MWIFIEX_SDIO) += mwifiex_sdio.o
diff --git a/drivers/net/wireless/mwifiex/README b/drivers/net/wireless/mwifiex/README
new file mode 100644
index 0000000..b55bade
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/README
@@ -0,0 +1,204 @@
+# Copyright (C) 2011, Marvell International Ltd.
+#
+# This software file (the "File") is distributed by Marvell International
+# Ltd. under the terms of the GNU General Public License Version 2, June 1991
+# (the "License"). You may use, redistribute and/or modify this File in
+# accordance with the terms and conditions of the License, a copy of which
+# is available by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+# worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+#
+# THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+# ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+# this warranty disclaimer.
+
+
+===============================================================================
+ U S E R M A N U A L
+
+1) FOR DRIVER INSTALL
+
+ a) Copy sd8787.bin to /lib/firmware/mrvl/ directory,
+ create the directory if it doesn't exist.
+ b) Install WLAN driver,
+ insmod mwifiex.ko
+ c) Uninstall WLAN driver,
+ ifconfig mlanX down
+ rmmod mwifiex
+
+
+2) FOR DRIVER CONFIGURATION AND INFO
+ The configurations can be done either using the 'iw' user space
+ utility or debugfs.
+
+ a) 'iw' utility commands
+
+ Following are some useful iw commands:-
+
+iw dev mlan0 scan
+
+ This command will trigger a scan.
+ The command will then display the scan table entries
+
+iw dev mlan0 connect -w <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1123456789a]
+ The above command can be used to connect to an AP with a particular SSID.
+ Ap's operating frequency can be specified or even the bssid. If the AP is using
+ WEP encryption, wep keys can be specified in the command.
+ Note: Every time before connecting to an AP scan command (iw dev mlan0 scan) should be used by user.
+
+iw dev mlan0 disconnect
+ This command will be used to disconnect from an AP.
+
+
+iw dev mlan0 ibss join <SSID> <freq in MHz> [fixed-freq] [fixed-bssid] [key 0:abcde]
+ The command will be used to join or create an ibss. Optionally, operating frequency,
+ bssid and the security related parameters can be specified while joining/creating
+ and ibss.
+
+iw dev mlan0 ibss leave
+ The command will be used to leave an ibss network.
+
+iw dev mlan0 link
+ The command will be used to get the connection status. The command will return parameters
+ such as SSID, operating frequency, rx/tx packets, signal strength, tx bitrate.
+
+ Apart from the iw utility all standard configurations using the 'iwconfig' utility are also supported.
+
+ b) Debugfs interface
+
+ The debugfs interface can be used for configurations and for getting
+ some useful information from the driver.
+ The section below explains the configurations that can be
+ done.
+
+ Mount debugfs to /debugfs mount point:
+
+ mkdir /debugfs
+ mount -t debugfs debugfs /debugfs
+
+ The information is provided in /debugfs/mwifiex/mlanX/:
+
+iw reg set <country code>
+ The command will be used to change the regulatory domain.
+
+iw reg get
+ The command will be used to get current regulatory domain.
+
+info
+ This command is used to get driver info.
+
+ Usage:
+ cat info
+
+ driver_name = "mwifiex"
+ driver_version = <driver_name, driver_version, (firmware_version)>
+ interface_name = "mlanX"
+ bss_mode = "Ad-hoc" | "Managed" | "Auto" | "Unknown"
+ media_state = "Disconnected" | "Connected"
+ mac_address = <6-byte adapter MAC address>
+ multicase_count = <multicast address count>
+ essid = <current SSID>
+ bssid = <current BSSID>
+ channel = <current channel>
+ region_code = <current region code>
+ multicasr_address[n] = <multicast address>
+ num_tx_bytes = <number of bytes sent to device>
+ num_rx_bytes = <number of bytes received from device and sent to kernel>
+ num_tx_pkts = <number of packets sent to device>
+ num_rx_pkts = <number of packets received from device and sent to kernel>
+ num_tx_pkts_dropped = <number of Tx packets dropped by driver>
+ num_rx_pkts_dropped = <number of Rx packets dropped by driver>
+ num_tx_pkts_err = <number of Tx packets failed to send to device>
+ num_rx_pkts_err = <number of Rx packets failed to receive from device>
+ carrier "on" | "off"
+ tx queue "stopped" | "started"
+
+ The following debug info are provided in /debugfs/mwifiex/mlanX/debug:
+
+ int_counter = <interrupt count, cleared when interrupt handled>
+ wmm_ac_vo = <number of packets sent to device from WMM AcVo queue>
+ wmm_ac_vi = <number of packets sent to device from WMM AcVi queue>
+ wmm_ac_be = <number of packets sent to device from WMM AcBE queue>
+ wmm_ac_bk = <number of packets sent to device from WMM AcBK queue>
+ max_tx_buf_size = <maximum Tx buffer size>
+ tx_buf_size = <current Tx buffer size>
+ curr_tx_buf_size = <current Tx buffer size>
+ ps_mode = <0/1, CAM mode/PS mode>
+ ps_state = <0/1/2/3, full power state/awake state/pre-sleep state/sleep state>
+ is_deep_sleep = <0/1, not deep sleep state/deep sleep state>
+ wakeup_dev_req = <0/1, wakeup device not required/required>
+ wakeup_tries = <wakeup device count, cleared when device awake>
+ hs_configured = <0/1, host sleep not configured/configured>
+ hs_activated = <0/1, extended host sleep not activated/activated>
+ num_tx_timeout = <number of Tx timeout>
+ num_cmd_timeout = <number of timeout commands>
+ timeout_cmd_id = <command id of the last timeout command>
+ timeout_cmd_act = <command action of the last timeout command>
+ last_cmd_id = <command id of the last several commands sent to device>
+ last_cmd_act = <command action of the last several commands sent to device>
+ last_cmd_index = <0 based last command index>
+ last_cmd_resp_id = <command id of the last several command responses received from device>
+ last_cmd_resp_index = <0 based last command response index>
+ last_event = <event id of the last several events received from device>
+ last_event_index = <0 based last event index>
+ num_cmd_h2c_fail = <number of commands failed to send to device>
+ num_cmd_sleep_cfm_fail = <number of sleep confirm failed to send to device>
+ num_tx_h2c_fail = <number of data packets failed to send to device>
+ num_evt_deauth = <number of deauthenticated events received from device>
+ num_evt_disassoc = <number of disassociated events received from device>
+ num_evt_link_lost = <number of link lost events received from device>
+ num_cmd_deauth = <number of deauthenticate commands sent to device>
+ num_cmd_assoc_ok = <number of associate commands with success return>
+ num_cmd_assoc_fail = <number of associate commands with failure return>
+ cmd_sent = <0/1, send command resources available/sending command to device>
+ data_sent = <0/1, send data resources available/sending data to device>
+ mp_rd_bitmap = <SDIO multi-port read bitmap>
+ mp_wr_bitmap = <SDIO multi-port write bitmap>
+ cmd_resp_received = <0/1, no cmd response to process/response received and yet to process>
+ event_received = <0/1, no event to process/event received and yet to process>
+ cmd_pending = <number of cmd pending>
+ tx_pending = <number of Tx packet pending>
+ rx_pending = <number of Rx packet pending>
+
+
+3) FOR DRIVER CONFIGURATION
+
+regrdwr
+ This command is used to read/write the adapter register.
+
+ Usage:
+ echo " <type> <offset> [value]" > regrdwr
+ cat regrdwr
+
+ where the parameters are,
+ <type>: 1:MAC/SOC, 2:BBP, 3:RF, 4:PMIC, 5:CAU
+ <offset>: offset of register
+ [value]: value to be written
+
+ Examples:
+ echo "1 0xa060" > regrdwr : Read the MAC register
+ echo "1 0xa060 0x12" > regrdwr : Write the MAC register
+ echo "1 0xa794 0x80000000" > regrdwr
+ : Write 0x80000000 to MAC register
+rdeeprom
+ This command is used to read the EEPROM contents of the card.
+
+ Usage:
+ echo "<offset> <length>" > rdeeprom
+ cat rdeeprom
+
+ where the parameters are,
+ <offset>: multiples of 4
+ <length>: 4-20, multiples of 4
+
+ Example:
+ echo "0 20" > rdeeprom : Read 20 bytes of EEPROM data from offset 0
+
+getlog
+ This command is used to get the statistics available in the station.
+ Usage:
+
+ cat getlog
+
+===============================================================================
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
new file mode 100644
index 0000000..660831c
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -0,0 +1,1417 @@
+/*
+ * Marvell Wireless LAN device driver: CFG80211
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "cfg80211.h"
+#include "main.h"
+
+/*
+ * This function maps the nl802.11 channel type into driver channel type.
+ *
+ * The mapping is as follows -
+ * NL80211_CHAN_NO_HT -> NO_SEC_CHANNEL
+ * NL80211_CHAN_HT20 -> NO_SEC_CHANNEL
+ * NL80211_CHAN_HT40PLUS -> SEC_CHANNEL_ABOVE
+ * NL80211_CHAN_HT40MINUS -> SEC_CHANNEL_BELOW
+ * Others -> NO_SEC_CHANNEL
+ */
+static int
+mwifiex_cfg80211_channel_type_to_mwifiex_channels(enum nl80211_channel_type
+ channel_type)
+{
+ switch (channel_type) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
+ return NO_SEC_CHANNEL;
+ case NL80211_CHAN_HT40PLUS:
+ return SEC_CHANNEL_ABOVE;
+ case NL80211_CHAN_HT40MINUS:
+ return SEC_CHANNEL_BELOW;
+ default:
+ return NO_SEC_CHANNEL;
+ }
+}
+
+/*
+ * This function maps the driver channel type into nl802.11 channel type.
+ *
+ * The mapping is as follows -
+ * NO_SEC_CHANNEL -> NL80211_CHAN_HT20
+ * SEC_CHANNEL_ABOVE -> NL80211_CHAN_HT40PLUS
+ * SEC_CHANNEL_BELOW -> NL80211_CHAN_HT40MINUS
+ * Others -> NL80211_CHAN_HT20
+ */
+static enum nl80211_channel_type
+mwifiex_channels_to_cfg80211_channel_type(int channel_type)
+{
+ switch (channel_type) {
+ case NO_SEC_CHANNEL:
+ return NL80211_CHAN_HT20;
+ case SEC_CHANNEL_ABOVE:
+ return NL80211_CHAN_HT40PLUS;
+ case SEC_CHANNEL_BELOW:
+ return NL80211_CHAN_HT40MINUS;
+ default:
+ return NL80211_CHAN_HT20;
+ }
+}
+
+/*
+ * This function checks whether WEP is set.
+ */
+static int
+mwifiex_is_alg_wep(u32 cipher)
+{
+ switch (cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ return 1;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * This function retrieves the private structure from kernel wiphy structure.
+ */
+static void *mwifiex_cfg80211_get_priv(struct wiphy *wiphy)
+{
+ return (void *) (*(unsigned long *) wiphy_priv(wiphy));
+}
+
+/*
+ * CFG802.11 operation handler to delete a network key.
+ */
+static int
+mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, bool pairwise, const u8 *mac_addr)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+
+ if (mwifiex_set_encode(priv, NULL, 0, key_index, 1)) {
+ wiphy_err(wiphy, "deleting the crypto keys\n");
+ return -EFAULT;
+ }
+
+ wiphy_dbg(wiphy, "info: crypto keys deleted\n");
+ return 0;
+}
+
+/*
+ * CFG802.11 operation handler to set Tx power.
+ */
+static int
+mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy,
+ enum nl80211_tx_power_setting type,
+ int dbm)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+ struct mwifiex_power_cfg power_cfg;
+
+ if (type == NL80211_TX_POWER_FIXED) {
+ power_cfg.is_power_auto = 0;
+ power_cfg.power_level = dbm;
+ } else {
+ power_cfg.is_power_auto = 1;
+ }
+
+ return mwifiex_set_tx_power(priv, &power_cfg);
+}
+
+/*
+ * CFG802.11 operation handler to set Power Save option.
+ *
+ * The timeout value, if provided, is currently ignored.
+ */
+static int
+mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
+ struct net_device *dev,
+ bool enabled, int timeout)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+ u32 ps_mode;
+
+ if (timeout)
+ wiphy_dbg(wiphy,
+ "info: ignoring the timeout value"
+ " for IEEE power save\n");
+
+ ps_mode = enabled;
+
+ return mwifiex_drv_set_power(priv, &ps_mode);
+}
+
+/*
+ * CFG802.11 operation handler to set the default network key.
+ */
+static int
+mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, bool unicast,
+ bool multicast)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+
+ /* Return if WEP key not configured */
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED)
+ return 0;
+
+ if (mwifiex_set_encode(priv, NULL, 0, key_index, 0)) {
+ wiphy_err(wiphy, "set default Tx key index\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/*
+ * CFG802.11 operation handler to add a network key.
+ */
+static int
+mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, bool pairwise, const u8 *mac_addr,
+ struct key_params *params)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+
+ if (mwifiex_set_encode(priv, params->key, params->key_len,
+ key_index, 0)) {
+ wiphy_err(wiphy, "crypto keys added\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/*
+ * This function sends domain information to the firmware.
+ *
+ * The following information are passed to the firmware -
+ * - Country codes
+ * - Sub bands (first channel, number of channels, maximum Tx power)
+ */
+static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
+{
+ u8 no_of_triplet = 0;
+ struct ieee80211_country_ie_triplet *t;
+ u8 no_of_parsed_chan = 0;
+ u8 first_chan = 0, next_chan = 0, max_pwr = 0;
+ u8 i, flag = 0;
+ enum ieee80211_band band;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *ch;
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg;
+
+ /* Set country code */
+ domain_info->country_code[0] = priv->country_code[0];
+ domain_info->country_code[1] = priv->country_code[1];
+ domain_info->country_code[2] = ' ';
+
+ band = mwifiex_band_to_radio_type(adapter->config_bands);
+ if (!wiphy->bands[band]) {
+ wiphy_err(wiphy, "11D: setting domain info in FW\n");
+ return -1;
+ }
+
+ sband = wiphy->bands[band];
+
+ for (i = 0; i < sband->n_channels ; i++) {
+ ch = &sband->channels[i];
+ if (ch->flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ if (!flag) {
+ flag = 1;
+ first_chan = (u32) ch->hw_value;
+ next_chan = first_chan;
+ max_pwr = ch->max_power;
+ no_of_parsed_chan = 1;
+ continue;
+ }
+
+ if (ch->hw_value == next_chan + 1 &&
+ ch->max_power == max_pwr) {
+ next_chan++;
+ no_of_parsed_chan++;
+ } else {
+ t = &domain_info->triplet[no_of_triplet];
+ t->chans.first_channel = first_chan;
+ t->chans.num_channels = no_of_parsed_chan;
+ t->chans.max_power = max_pwr;
+ no_of_triplet++;
+ first_chan = (u32) ch->hw_value;
+ next_chan = first_chan;
+ max_pwr = ch->max_power;
+ no_of_parsed_chan = 1;
+ }
+ }
+
+ if (flag) {
+ t = &domain_info->triplet[no_of_triplet];
+ t->chans.first_channel = first_chan;
+ t->chans.num_channels = no_of_parsed_chan;
+ t->chans.max_power = max_pwr;
+ no_of_triplet++;
+ }
+
+ domain_info->no_of_triplet = no_of_triplet;
+
+ if (mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
+ HostCmd_ACT_GEN_SET, 0, NULL)) {
+ wiphy_err(wiphy, "11D: setting domain info in FW\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * CFG802.11 regulatory domain callback function.
+ *
+ * This function is called when the regulatory domain is changed due to the
+ * following reasons -
+ * - Set by driver
+ * - Set by system core
+ * - Set by user
+ * - Set bt Country IE
+ */
+static int mwifiex_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *request)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+
+ wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for domain"
+ " %c%c\n", request->alpha2[0], request->alpha2[1]);
+
+ memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2));
+
+ switch (request->initiator) {
+ case NL80211_REGDOM_SET_BY_DRIVER:
+ case NL80211_REGDOM_SET_BY_CORE:
+ case NL80211_REGDOM_SET_BY_USER:
+ break;
+ /* Todo: apply driver specific changes in channel flags based
+ on the request initiator if necessary. */
+ case NL80211_REGDOM_SET_BY_COUNTRY_IE:
+ break;
+ }
+ mwifiex_send_domain_info_cmd_fw(wiphy);
+
+ return 0;
+}
+
+/*
+ * This function sets the RF channel.
+ *
+ * This function creates multiple IOCTL requests, populates them accordingly
+ * and issues them to set the band/channel and frequency.
+ */
+static int
+mwifiex_set_rf_channel(struct mwifiex_private *priv,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type)
+{
+ struct mwifiex_chan_freq_power cfp;
+ struct mwifiex_ds_band_cfg band_cfg;
+ u32 config_bands = 0;
+ struct wiphy *wiphy = priv->wdev->wiphy;
+
+ if (chan) {
+ memset(&band_cfg, 0, sizeof(band_cfg));
+ /* Set appropriate bands */
+ if (chan->band == IEEE80211_BAND_2GHZ)
+ config_bands = BAND_B | BAND_G | BAND_GN;
+ else
+ config_bands = BAND_AN | BAND_A;
+ if (priv->bss_mode == NL80211_IFTYPE_STATION
+ || priv->bss_mode == NL80211_IFTYPE_UNSPECIFIED) {
+ band_cfg.config_bands = config_bands;
+ } else if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+ band_cfg.config_bands = config_bands;
+ band_cfg.adhoc_start_band = config_bands;
+ }
+
+ band_cfg.sec_chan_offset =
+ mwifiex_cfg80211_channel_type_to_mwifiex_channels
+ (channel_type);
+
+ if (mwifiex_set_radio_band_cfg(priv, &band_cfg))
+ return -EFAULT;
+
+ mwifiex_send_domain_info_cmd_fw(wiphy);
+ }
+
+ wiphy_dbg(wiphy, "info: setting band %d, channel offset %d and "
+ "mode %d\n", config_bands, band_cfg.sec_chan_offset,
+ priv->bss_mode);
+ if (!chan)
+ return 0;
+
+ memset(&cfp, 0, sizeof(cfp));
+ cfp.freq = chan->center_freq;
+ cfp.channel = ieee80211_frequency_to_channel(chan->center_freq);
+
+ if (mwifiex_bss_set_channel(priv, &cfp))
+ return -EFAULT;
+
+ return mwifiex_drv_change_adhoc_chan(priv, cfp.channel);
+}
+
+/*
+ * CFG802.11 operation handler to set channel.
+ *
+ * This function can only be used when station is not connected.
+ */
+static int
+mwifiex_cfg80211_set_channel(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+
+ if (priv->media_connected) {
+ wiphy_err(wiphy, "This setting is valid only when station "
+ "is not connected\n");
+ return -EINVAL;
+ }
+
+ return mwifiex_set_rf_channel(priv, chan, channel_type);
+}
+
+/*
+ * This function sets the fragmentation threshold.
+ *
+ * The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE
+ * and MWIFIEX_FRAG_MAX_VALUE.
+ */
+static int
+mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
+{
+ int ret;
+
+ if (frag_thr < MWIFIEX_FRAG_MIN_VALUE
+ || frag_thr > MWIFIEX_FRAG_MAX_VALUE)
+ return -EINVAL;
+
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
+ HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
+ &frag_thr);
+
+ return ret;
+}
+
+/*
+ * This function sets the RTS threshold.
+
+ * The rts value must lie between MWIFIEX_RTS_MIN_VALUE
+ * and MWIFIEX_RTS_MAX_VALUE.
+ */
+static int
+mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr)
+{
+ if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE)
+ rts_thr = MWIFIEX_RTS_MAX_VALUE;
+
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
+ HostCmd_ACT_GEN_SET, RTS_THRESH_I,
+ &rts_thr);
+}
+
+/*
+ * CFG802.11 operation handler to set wiphy parameters.
+ *
+ * This function can be used to set the RTS threshold and the
+ * Fragmentation threshold of the driver.
+ */
+static int
+mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+ int ret = 0;
+
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+ ret = mwifiex_set_rts(priv, wiphy->rts_threshold);
+ if (ret)
+ return ret;
+ }
+
+ if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
+ ret = mwifiex_set_frag(priv, wiphy->frag_threshold);
+
+ return ret;
+}
+
+/*
+ * CFG802.11 operation handler to change interface type.
+ */
+static int
+mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
+ struct net_device *dev,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ int ret;
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+ if (priv->bss_mode == type) {
+ wiphy_warn(wiphy, "already set to required type\n");
+ return 0;
+ }
+
+ priv->bss_mode = type;
+
+ switch (type) {
+ case NL80211_IFTYPE_ADHOC:
+ dev->ieee80211_ptr->iftype = NL80211_IFTYPE_ADHOC;
+ wiphy_dbg(wiphy, "info: setting interface type to adhoc\n");
+ break;
+ case NL80211_IFTYPE_STATION:
+ dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION;
+ wiphy_dbg(wiphy, "info: setting interface type to managed\n");
+ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION;
+ wiphy_dbg(wiphy, "info: setting interface type to auto\n");
+ return 0;
+ default:
+ wiphy_err(wiphy, "unknown interface type: %d\n", type);
+ return -EINVAL;
+ }
+
+ mwifiex_deauthenticate(priv, NULL);
+
+ priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
+
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_SET_BSS_MODE,
+ HostCmd_ACT_GEN_SET, 0, NULL);
+
+ return ret;
+}
+
+/*
+ * This function dumps the station information on a buffer.
+ *
+ * The following information are shown -
+ * - Total bytes transmitted
+ * - Total bytes received
+ * - Total packets transmitted
+ * - Total packets received
+ * - Signal quality level
+ * - Transmission rate
+ */
+static int
+mwifiex_dump_station_info(struct mwifiex_private *priv,
+ struct station_info *sinfo)
+{
+ struct mwifiex_ds_get_signal signal;
+ struct mwifiex_rate_cfg rate;
+ int ret = 0;
+
+ sinfo->filled = STATION_INFO_RX_BYTES | STATION_INFO_TX_BYTES |
+ STATION_INFO_RX_PACKETS |
+ STATION_INFO_TX_PACKETS
+ | STATION_INFO_SIGNAL | STATION_INFO_TX_BITRATE;
+
+ /* Get signal information from the firmware */
+ memset(&signal, 0, sizeof(struct mwifiex_ds_get_signal));
+ if (mwifiex_get_signal_info(priv, &signal)) {
+ dev_err(priv->adapter->dev, "getting signal information\n");
+ ret = -EFAULT;
+ }
+
+ if (mwifiex_drv_get_data_rate(priv, &rate)) {
+ dev_err(priv->adapter->dev, "getting data rate\n");
+ ret = -EFAULT;
+ }
+
+ sinfo->rx_bytes = priv->stats.rx_bytes;
+ sinfo->tx_bytes = priv->stats.tx_bytes;
+ sinfo->rx_packets = priv->stats.rx_packets;
+ sinfo->tx_packets = priv->stats.tx_packets;
+ sinfo->signal = priv->w_stats.qual.level;
+ sinfo->txrate.legacy = rate.rate;
+
+ return ret;
+}
+
+/*
+ * CFG802.11 operation handler to get station information.
+ *
+ * This function only works in connected mode, and dumps the
+ * requested station information, if available.
+ */
+static int
+mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac, struct station_info *sinfo)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+ mwifiex_dump_station_info(priv, sinfo);
+
+ if (!priv->media_connected)
+ return -ENOENT;
+ if (memcmp(mac, priv->cfg_bssid, ETH_ALEN))
+ return -ENOENT;
+
+ return mwifiex_dump_station_info(priv, sinfo);
+}
+
+/* Supported rates to be advertised to the cfg80211 */
+
+static struct ieee80211_rate mwifiex_rates[] = {
+ {.bitrate = 10, .hw_value = 2, },
+ {.bitrate = 20, .hw_value = 4, },
+ {.bitrate = 55, .hw_value = 11, },
+ {.bitrate = 110, .hw_value = 22, },
+ {.bitrate = 220, .hw_value = 44, },
+ {.bitrate = 60, .hw_value = 12, },
+ {.bitrate = 90, .hw_value = 18, },
+ {.bitrate = 120, .hw_value = 24, },
+ {.bitrate = 180, .hw_value = 36, },
+ {.bitrate = 240, .hw_value = 48, },
+ {.bitrate = 360, .hw_value = 72, },
+ {.bitrate = 480, .hw_value = 96, },
+ {.bitrate = 540, .hw_value = 108, },
+ {.bitrate = 720, .hw_value = 144, },
+};
+
+/* Channel definitions to be advertised to cfg80211 */
+
+static struct ieee80211_channel mwifiex_channels_2ghz[] = {
+ {.center_freq = 2412, .hw_value = 1, },
+ {.center_freq = 2417, .hw_value = 2, },
+ {.center_freq = 2422, .hw_value = 3, },
+ {.center_freq = 2427, .hw_value = 4, },
+ {.center_freq = 2432, .hw_value = 5, },
+ {.center_freq = 2437, .hw_value = 6, },
+ {.center_freq = 2442, .hw_value = 7, },
+ {.center_freq = 2447, .hw_value = 8, },
+ {.center_freq = 2452, .hw_value = 9, },
+ {.center_freq = 2457, .hw_value = 10, },
+ {.center_freq = 2462, .hw_value = 11, },
+ {.center_freq = 2467, .hw_value = 12, },
+ {.center_freq = 2472, .hw_value = 13, },
+ {.center_freq = 2484, .hw_value = 14, },
+};
+
+static struct ieee80211_supported_band mwifiex_band_2ghz = {
+ .channels = mwifiex_channels_2ghz,
+ .n_channels = ARRAY_SIZE(mwifiex_channels_2ghz),
+ .bitrates = mwifiex_rates,
+ .n_bitrates = 14,
+};
+
+static struct ieee80211_channel mwifiex_channels_5ghz[] = {
+ {.center_freq = 5040, .hw_value = 8, },
+ {.center_freq = 5060, .hw_value = 12, },
+ {.center_freq = 5080, .hw_value = 16, },
+ {.center_freq = 5170, .hw_value = 34, },
+ {.center_freq = 5190, .hw_value = 38, },
+ {.center_freq = 5210, .hw_value = 42, },
+ {.center_freq = 5230, .hw_value = 46, },
+ {.center_freq = 5180, .hw_value = 36, },
+ {.center_freq = 5200, .hw_value = 40, },
+ {.center_freq = 5220, .hw_value = 44, },
+ {.center_freq = 5240, .hw_value = 48, },
+ {.center_freq = 5260, .hw_value = 52, },
+ {.center_freq = 5280, .hw_value = 56, },
+ {.center_freq = 5300, .hw_value = 60, },
+ {.center_freq = 5320, .hw_value = 64, },
+ {.center_freq = 5500, .hw_value = 100, },
+ {.center_freq = 5520, .hw_value = 104, },
+ {.center_freq = 5540, .hw_value = 108, },
+ {.center_freq = 5560, .hw_value = 112, },
+ {.center_freq = 5580, .hw_value = 116, },
+ {.center_freq = 5600, .hw_value = 120, },
+ {.center_freq = 5620, .hw_value = 124, },
+ {.center_freq = 5640, .hw_value = 128, },
+ {.center_freq = 5660, .hw_value = 132, },
+ {.center_freq = 5680, .hw_value = 136, },
+ {.center_freq = 5700, .hw_value = 140, },
+ {.center_freq = 5745, .hw_value = 149, },
+ {.center_freq = 5765, .hw_value = 153, },
+ {.center_freq = 5785, .hw_value = 157, },
+ {.center_freq = 5805, .hw_value = 161, },
+ {.center_freq = 5825, .hw_value = 165, },
+};
+
+static struct ieee80211_supported_band mwifiex_band_5ghz = {
+ .channels = mwifiex_channels_5ghz,
+ .n_channels = ARRAY_SIZE(mwifiex_channels_5ghz),
+ .bitrates = mwifiex_rates - 4,
+ .n_bitrates = ARRAY_SIZE(mwifiex_rates) + 4,
+};
+
+
+/* Supported crypto cipher suits to be advertised to cfg80211 */
+
+static const u32 mwifiex_cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
+};
+
+/*
+ * CFG802.11 operation handler for disconnection request.
+ *
+ * This function does not work when there is already a disconnection
+ * procedure going on.
+ */
+static int
+mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
+ u16 reason_code)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+ if (priv->disconnect)
+ return -EBUSY;
+
+ priv->disconnect = 1;
+ if (mwifiex_deauthenticate(priv, NULL))
+ return -EFAULT;
+
+ wiphy_dbg(wiphy, "info: successfully disconnected from %pM:"
+ " reason code %d\n", priv->cfg_bssid, reason_code);
+
+ queue_work(priv->workqueue, &priv->cfg_workqueue);
+
+ return 0;
+}
+
+/*
+ * This function informs the CFG802.11 subsystem of a new IBSS.
+ *
+ * The following information are sent to the CFG802.11 subsystem
+ * to register the new IBSS. If we do not register the new IBSS,
+ * a kernel panic will result.
+ * - SSID
+ * - SSID length
+ * - BSSID
+ * - Channel
+ */
+static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
+{
+ struct ieee80211_channel *chan;
+ struct mwifiex_bss_info bss_info;
+ int ie_len;
+ u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)];
+
+ if (mwifiex_get_bss_info(priv, &bss_info))
+ return -1;
+
+ ie_buf[0] = WLAN_EID_SSID;
+ ie_buf[1] = bss_info.ssid.ssid_len;
+
+ memcpy(&ie_buf[sizeof(struct ieee_types_header)],
+ &bss_info.ssid.ssid,
+ bss_info.ssid.ssid_len);
+ ie_len = ie_buf[1] + sizeof(struct ieee_types_header);
+
+ chan = __ieee80211_get_channel(priv->wdev->wiphy,
+ ieee80211_channel_to_frequency(bss_info.bss_chan,
+ priv->curr_bss_params.band));
+
+ cfg80211_inform_bss(priv->wdev->wiphy, chan,
+ bss_info.bssid, 0, WLAN_CAPABILITY_IBSS,
+ 0, ie_buf, ie_len, 0, GFP_KERNEL);
+ memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN);
+
+ return 0;
+}
+
+/*
+ * This function informs the CFG802.11 subsystem of a new BSS connection.
+ *
+ * The following information are sent to the CFG802.11 subsystem
+ * to register the new BSS connection. If we do not register the new BSS,
+ * a kernel panic will result.
+ * - MAC address
+ * - Capabilities
+ * - Beacon period
+ * - RSSI value
+ * - Channel
+ * - Supported rates IE
+ * - Extended capabilities IE
+ * - DS parameter set IE
+ * - HT Capability IE
+ * - Vendor Specific IE (221)
+ * - WPA IE
+ * - RSN IE
+ */
+static int mwifiex_inform_bss_from_scan_result(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *ssid)
+{
+ struct mwifiex_bssdescriptor *scan_table;
+ int i, j;
+ struct ieee80211_channel *chan;
+ u8 *ie, *ie_buf;
+ u32 ie_len;
+ u8 *beacon;
+ int beacon_size;
+ u8 element_id, element_len;
+
+#define MAX_IE_BUF 2048
+ ie_buf = kzalloc(MAX_IE_BUF, GFP_KERNEL);
+ if (!ie_buf) {
+ dev_err(priv->adapter->dev, "%s: failed to alloc ie_buf\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ scan_table = priv->adapter->scan_table;
+ for (i = 0; i < priv->adapter->num_in_scan_table; i++) {
+ if (ssid) {
+ /* Inform specific BSS only */
+ if (memcmp(ssid->ssid, scan_table[i].ssid.ssid,
+ ssid->ssid_len))
+ continue;
+ }
+ memset(ie_buf, 0, MAX_IE_BUF);
+ ie_buf[0] = WLAN_EID_SSID;
+ ie_buf[1] = scan_table[i].ssid.ssid_len;
+ memcpy(&ie_buf[sizeof(struct ieee_types_header)],
+ scan_table[i].ssid.ssid, ie_buf[1]);
+
+ ie = ie_buf + ie_buf[1] + sizeof(struct ieee_types_header);
+ ie_len = ie_buf[1] + sizeof(struct ieee_types_header);
+
+ ie[0] = WLAN_EID_SUPP_RATES;
+
+ for (j = 0; j < sizeof(scan_table[i].supported_rates); j++) {
+ if (!scan_table[i].supported_rates[j])
+ break;
+ else
+ ie[j + sizeof(struct ieee_types_header)] =
+ scan_table[i].supported_rates[j];
+ }
+
+ ie[1] = j;
+ ie_len += ie[1] + sizeof(struct ieee_types_header);
+
+ beacon = scan_table[i].beacon_buf;
+ beacon_size = scan_table[i].beacon_buf_size;
+
+ /* Skip time stamp, beacon interval and capability */
+
+ if (beacon) {
+ beacon += sizeof(scan_table[i].beacon_period)
+ + sizeof(scan_table[i].time_stamp) +
+ +sizeof(scan_table[i].cap_info_bitmap);
+
+ beacon_size -= sizeof(scan_table[i].beacon_period)
+ + sizeof(scan_table[i].time_stamp)
+ + sizeof(scan_table[i].cap_info_bitmap);
+ }
+
+ while (beacon_size >= sizeof(struct ieee_types_header)) {
+ ie = ie_buf + ie_len;
+ element_id = *beacon;
+ element_len = *(beacon + 1);
+ if (beacon_size < (int) element_len +
+ sizeof(struct ieee_types_header)) {
+ dev_err(priv->adapter->dev, "%s: in processing"
+ " IE, bytes left < IE length\n",
+ __func__);
+ break;
+ }
+ switch (element_id) {
+ case WLAN_EID_EXT_CAPABILITY:
+ case WLAN_EID_DS_PARAMS:
+ case WLAN_EID_HT_CAPABILITY:
+ case WLAN_EID_VENDOR_SPECIFIC:
+ case WLAN_EID_RSN:
+ case WLAN_EID_BSS_AC_ACCESS_DELAY:
+ ie[0] = element_id;
+ ie[1] = element_len;
+ memcpy(&ie[sizeof(struct ieee_types_header)],
+ (u8 *) beacon
+ + sizeof(struct ieee_types_header),
+ element_len);
+ ie_len += ie[1] +
+ sizeof(struct ieee_types_header);
+ break;
+ default:
+ break;
+ }
+ beacon += element_len +
+ sizeof(struct ieee_types_header);
+ beacon_size -= element_len +
+ sizeof(struct ieee_types_header);
+ }
+ chan = ieee80211_get_channel(priv->wdev->wiphy,
+ scan_table[i].freq);
+ cfg80211_inform_bss(priv->wdev->wiphy, chan,
+ scan_table[i].mac_address,
+ 0, scan_table[i].cap_info_bitmap,
+ scan_table[i].beacon_period,
+ ie_buf, ie_len,
+ scan_table[i].rssi, GFP_KERNEL);
+ }
+
+ kfree(ie_buf);
+ return 0;
+}
+
+/*
+ * This function connects with a BSS.
+ *
+ * This function handles both Infra and Ad-Hoc modes. It also performs
+ * validity checking on the provided parameters, disconnects from the
+ * current BSS (if any), sets up the association/scan parameters,
+ * including security settings, and performs specific SSID scan before
+ * trying to connect.
+ *
+ * For Infra mode, the function returns failure if the specified SSID
+ * is not found in scan table. However, for Ad-Hoc mode, it can create
+ * the IBSS if it does not exist. On successful completion in either case,
+ * the function notifies the CFG802.11 subsystem of the new BSS connection,
+ * otherwise the kernel will panic.
+ */
+static int
+mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
+ u8 *bssid, int mode, struct ieee80211_channel *channel,
+ struct cfg80211_connect_params *sme, bool privacy)
+{
+ struct mwifiex_802_11_ssid req_ssid;
+ struct mwifiex_ssid_bssid ssid_bssid;
+ int ret, auth_type = 0;
+
+ memset(&req_ssid, 0, sizeof(struct mwifiex_802_11_ssid));
+ memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));
+
+ req_ssid.ssid_len = ssid_len;
+ if (ssid_len > IEEE80211_MAX_SSID_LEN) {
+ dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
+ return -EINVAL;
+ }
+
+ memcpy(req_ssid.ssid, ssid, ssid_len);
+ if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) {
+ dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
+ return -EINVAL;
+ }
+
+ /* disconnect before try to associate */
+ mwifiex_deauthenticate(priv, NULL);
+
+ if (channel)
+ ret = mwifiex_set_rf_channel(priv, channel,
+ mwifiex_channels_to_cfg80211_channel_type
+ (priv->adapter->chan_offset));
+
+ ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */
+
+ if (mode == NL80211_IFTYPE_ADHOC) {
+ /* "privacy" is set only for ad-hoc mode */
+ if (privacy) {
+ /*
+ * Keep WLAN_CIPHER_SUITE_WEP104 for now so that
+ * the firmware can find a matching network from the
+ * scan. The cfg80211 does not give us the encryption
+ * mode at this stage so just setting it to WEP here.
+ */
+ priv->sec_info.encryption_mode =
+ WLAN_CIPHER_SUITE_WEP104;
+ priv->sec_info.authentication_mode =
+ NL80211_AUTHTYPE_OPEN_SYSTEM;
+ }
+
+ goto done;
+ }
+
+ /* Now handle infra mode. "sme" is valid for infra mode only */
+ if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC
+ || sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM)
+ auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM;
+ else if (sme->auth_type == NL80211_AUTHTYPE_SHARED_KEY)
+ auth_type = NL80211_AUTHTYPE_SHARED_KEY;
+
+ if (sme->crypto.n_ciphers_pairwise) {
+ priv->sec_info.encryption_mode =
+ sme->crypto.ciphers_pairwise[0];
+ priv->sec_info.authentication_mode = auth_type;
+ }
+
+ if (sme->crypto.cipher_group) {
+ priv->sec_info.encryption_mode = sme->crypto.cipher_group;
+ priv->sec_info.authentication_mode = auth_type;
+ }
+ if (sme->ie)
+ ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len);
+
+ if (sme->key) {
+ if (mwifiex_is_alg_wep(0) | mwifiex_is_alg_wep(0)) {
+ dev_dbg(priv->adapter->dev,
+ "info: setting wep encryption"
+ " with key len %d\n", sme->key_len);
+ ret = mwifiex_set_encode(priv, sme->key, sme->key_len,
+ sme->key_idx, 0);
+ }
+ }
+done:
+ /* Do specific SSID scanning */
+ if (mwifiex_request_scan(priv, &req_ssid)) {
+ dev_err(priv->adapter->dev, "scan error\n");
+ return -EFAULT;
+ }
+
+
+ memcpy(&ssid_bssid.ssid, &req_ssid, sizeof(struct mwifiex_802_11_ssid));
+
+ if (mode != NL80211_IFTYPE_ADHOC) {
+ if (mwifiex_find_best_bss(priv, &ssid_bssid))
+ return -EFAULT;
+ /* Inform the BSS information to kernel, otherwise
+ * kernel will give a panic after successful assoc */
+ if (mwifiex_inform_bss_from_scan_result(priv, &req_ssid))
+ return -EFAULT;
+ }
+
+ dev_dbg(priv->adapter->dev, "info: trying to associate to %s and bssid %pM\n",
+ (char *) req_ssid.ssid, ssid_bssid.bssid);
+
+ memcpy(&priv->cfg_bssid, ssid_bssid.bssid, 6);
+
+ /* Connect to BSS by ESSID */
+ memset(&ssid_bssid.bssid, 0, ETH_ALEN);
+
+ if (!netif_queue_stopped(priv->netdev))
+ netif_stop_queue(priv->netdev);
+
+ if (mwifiex_bss_start(priv, &ssid_bssid))
+ return -EFAULT;
+
+ if (mode == NL80211_IFTYPE_ADHOC) {
+ /* Inform the BSS information to kernel, otherwise
+ * kernel will give a panic after successful assoc */
+ if (mwifiex_cfg80211_inform_ibss_bss(priv))
+ return -EFAULT;
+ }
+
+ return ret;
+}
+
+/*
+ * CFG802.11 operation handler for association request.
+ *
+ * This function does not work when the current mode is set to Ad-Hoc, or
+ * when there is already an association procedure going on. The given BSS
+ * information is used to associate.
+ */
+static int
+mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_connect_params *sme)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+ int ret = 0;
+
+ if (priv->assoc_request)
+ return -EBUSY;
+
+ if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+ wiphy_err(wiphy, "received infra assoc request "
+ "when station is in ibss mode\n");
+ goto done;
+ }
+
+ priv->assoc_request = -EINPROGRESS;
+
+ wiphy_dbg(wiphy, "info: Trying to associate to %s and bssid %pM\n",
+ (char *) sme->ssid, sme->bssid);
+
+ ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid,
+ priv->bss_mode, sme->channel, sme, 0);
+
+ priv->assoc_request = 1;
+done:
+ priv->assoc_result = ret;
+ queue_work(priv->workqueue, &priv->cfg_workqueue);
+ return ret;
+}
+
+/*
+ * CFG802.11 operation handler to join an IBSS.
+ *
+ * This function does not work in any mode other than Ad-Hoc, or if
+ * a join operation is already in progress.
+ */
+static int
+mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+ int ret = 0;
+
+ if (priv->ibss_join_request)
+ return -EBUSY;
+
+ if (priv->bss_mode != NL80211_IFTYPE_ADHOC) {
+ wiphy_err(wiphy, "request to join ibss received "
+ "when station is not in ibss mode\n");
+ goto done;
+ }
+
+ priv->ibss_join_request = -EINPROGRESS;
+
+ wiphy_dbg(wiphy, "info: trying to join to %s and bssid %pM\n",
+ (char *) params->ssid, params->bssid);
+
+ ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid,
+ params->bssid, priv->bss_mode,
+ params->channel, NULL, params->privacy);
+
+ priv->ibss_join_request = 1;
+done:
+ priv->ibss_join_result = ret;
+ queue_work(priv->workqueue, &priv->cfg_workqueue);
+ return ret;
+}
+
+/*
+ * CFG802.11 operation handler to leave an IBSS.
+ *
+ * This function does not work if a leave operation is
+ * already in progress.
+ */
+static int
+mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+ struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
+
+ if (priv->disconnect)
+ return -EBUSY;
+
+ priv->disconnect = 1;
+
+ wiphy_dbg(wiphy, "info: disconnecting from essid %pM\n",
+ priv->cfg_bssid);
+ if (mwifiex_deauthenticate(priv, NULL))
+ return -EFAULT;
+
+ queue_work(priv->workqueue, &priv->cfg_workqueue);
+
+ return 0;
+}
+
+/*
+ * CFG802.11 operation handler for scan request.
+ *
+ * This function issues a scan request to the firmware based upon
+ * the user specified scan configuration. On successfull completion,
+ * it also informs the results.
+ */
+static int
+mwifiex_cfg80211_scan(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_scan_request *request)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+ wiphy_dbg(wiphy, "info: received scan request on %s\n", dev->name);
+
+ if (priv->scan_request && priv->scan_request != request)
+ return -EBUSY;
+
+ priv->scan_request = request;
+
+ queue_work(priv->workqueue, &priv->cfg_workqueue);
+ return 0;
+}
+
+/*
+ * This function sets up the CFG802.11 specific HT capability fields
+ * with default values.
+ *
+ * The following default values are set -
+ * - HT Supported = True
+ * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K
+ * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE
+ * - HT Capabilities supported by firmware
+ * - MCS information, Rx mask = 0xff
+ * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01)
+ */
+static void
+mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
+ struct mwifiex_private *priv)
+{
+ int rx_mcs_supp;
+ struct ieee80211_mcs_info mcs_set;
+ u8 *mcs = (u8 *)&mcs_set;
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ ht_info->ht_supported = true;
+ ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE;
+
+ memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+
+ /* Fill HT capability information */
+ if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
+ ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ else
+ ht_info->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+ if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap))
+ ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
+ else
+ ht_info->cap &= ~IEEE80211_HT_CAP_SGI_20;
+
+ if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap))
+ ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
+ else
+ ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40;
+
+ if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap))
+ ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ else
+ ht_info->cap &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
+
+ if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap))
+ ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+ else
+ ht_info->cap &= ~IEEE80211_HT_CAP_TX_STBC;
+
+ ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU;
+ ht_info->cap |= IEEE80211_HT_CAP_SM_PS;
+
+ rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support);
+ /* Set MCS for 1x1 */
+ memset(mcs, 0xff, rx_mcs_supp);
+ /* Clear all the other values */
+ memset(&mcs[rx_mcs_supp], 0,
+ sizeof(struct ieee80211_mcs_info) - rx_mcs_supp);
+ if (priv->bss_mode == NL80211_IFTYPE_STATION ||
+ ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
+ /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
+ SETHT_MCS32(mcs_set.rx_mask);
+
+ memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info));
+
+ ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+}
+
+/* station cfg80211 operations */
+static struct cfg80211_ops mwifiex_cfg80211_ops = {
+ .change_virtual_intf = mwifiex_cfg80211_change_virtual_intf,
+ .scan = mwifiex_cfg80211_scan,
+ .connect = mwifiex_cfg80211_connect,
+ .disconnect = mwifiex_cfg80211_disconnect,
+ .get_station = mwifiex_cfg80211_get_station,
+ .set_wiphy_params = mwifiex_cfg80211_set_wiphy_params,
+ .set_channel = mwifiex_cfg80211_set_channel,
+ .join_ibss = mwifiex_cfg80211_join_ibss,
+ .leave_ibss = mwifiex_cfg80211_leave_ibss,
+ .add_key = mwifiex_cfg80211_add_key,
+ .del_key = mwifiex_cfg80211_del_key,
+ .set_default_key = mwifiex_cfg80211_set_default_key,
+ .set_power_mgmt = mwifiex_cfg80211_set_power_mgmt,
+ .set_tx_power = mwifiex_cfg80211_set_tx_power,
+};
+
+/*
+ * This function registers the device with CFG802.11 subsystem.
+ *
+ * The function creates the wireless device/wiphy, populates it with
+ * default parameters and handler function pointers, and finally
+ * registers the device.
+ */
+int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac,
+ struct mwifiex_private *priv)
+{
+ int ret;
+ void *wdev_priv;
+ struct wireless_dev *wdev;
+
+ wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+ if (!wdev) {
+ dev_err(priv->adapter->dev, "%s: allocating wireless device\n",
+ __func__);
+ return -ENOMEM;
+ }
+ wdev->wiphy =
+ wiphy_new(&mwifiex_cfg80211_ops,
+ sizeof(struct mwifiex_private *));
+ if (!wdev->wiphy) {
+ kfree(wdev);
+ return -ENOMEM;
+ }
+ wdev->iftype = NL80211_IFTYPE_STATION;
+ wdev->wiphy->max_scan_ssids = 10;
+ wdev->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
+
+ wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &mwifiex_band_2ghz;
+ mwifiex_setup_ht_caps(
+ &wdev->wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap, priv);
+
+ if (priv->adapter->config_bands & BAND_A) {
+ wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &mwifiex_band_5ghz;
+ mwifiex_setup_ht_caps(
+ &wdev->wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap, priv);
+ } else {
+ wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
+ }
+
+ /* Initialize cipher suits */
+ wdev->wiphy->cipher_suites = mwifiex_cipher_suites;
+ wdev->wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites);
+
+ memcpy(wdev->wiphy->perm_addr, mac, 6);
+ wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+ /* We are using custom domains */
+ wdev->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+
+ wdev->wiphy->reg_notifier = mwifiex_reg_notifier;
+
+ /* Set struct mwifiex_private pointer in wiphy_priv */
+ wdev_priv = wiphy_priv(wdev->wiphy);
+
+ *(unsigned long *) wdev_priv = (unsigned long) priv;
+
+ ret = wiphy_register(wdev->wiphy);
+ if (ret < 0) {
+ dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
+ __func__);
+ wiphy_free(wdev->wiphy);
+ kfree(wdev);
+ return ret;
+ } else {
+ dev_dbg(priv->adapter->dev,
+ "info: successfully registered wiphy device\n");
+ }
+
+ dev_net_set(dev, wiphy_net(wdev->wiphy));
+ dev->ieee80211_ptr = wdev;
+ memcpy(dev->dev_addr, wdev->wiphy->perm_addr, 6);
+ memcpy(dev->perm_addr, wdev->wiphy->perm_addr, 6);
+ SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy));
+ priv->wdev = wdev;
+
+ dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
+ dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT;
+ dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN;
+
+ return ret;
+}
+
+/*
+ * This function handles the result of different pending network operations.
+ *
+ * The following operations are handled and CFG802.11 subsystem is
+ * notified accordingly -
+ * - Scan request completion
+ * - Association request completion
+ * - IBSS join request completion
+ * - Disconnect request completion
+ */
+void
+mwifiex_cfg80211_results(struct work_struct *work)
+{
+ struct mwifiex_private *priv =
+ container_of(work, struct mwifiex_private, cfg_workqueue);
+ struct mwifiex_user_scan_cfg *scan_req;
+ int ret = 0, i;
+ struct ieee80211_channel *chan;
+
+ if (priv->scan_request) {
+ scan_req = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
+ GFP_KERNEL);
+ if (!scan_req) {
+ dev_err(priv->adapter->dev, "failed to alloc "
+ "scan_req\n");
+ return;
+ }
+ for (i = 0; i < priv->scan_request->n_ssids; i++) {
+ memcpy(scan_req->ssid_list[i].ssid,
+ priv->scan_request->ssids[i].ssid,
+ priv->scan_request->ssids[i].ssid_len);
+ scan_req->ssid_list[i].max_len =
+ priv->scan_request->ssids[i].ssid_len;
+ }
+ for (i = 0; i < priv->scan_request->n_channels; i++) {
+ chan = priv->scan_request->channels[i];
+ scan_req->chan_list[i].chan_number = chan->hw_value;
+ scan_req->chan_list[i].radio_type = chan->band;
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ scan_req->chan_list[i].scan_type =
+ MWIFIEX_SCAN_TYPE_PASSIVE;
+ else
+ scan_req->chan_list[i].scan_type =
+ MWIFIEX_SCAN_TYPE_ACTIVE;
+ scan_req->chan_list[i].scan_time = 0;
+ }
+ if (mwifiex_set_user_scan_ioctl(priv, scan_req)) {
+ ret = -EFAULT;
+ goto done;
+ }
+ if (mwifiex_inform_bss_from_scan_result(priv, NULL))
+ ret = -EFAULT;
+done:
+ priv->scan_result_status = ret;
+ dev_dbg(priv->adapter->dev, "info: %s: sending scan results\n",
+ __func__);
+ cfg80211_scan_done(priv->scan_request,
+ (priv->scan_result_status < 0));
+ priv->scan_request = NULL;
+ kfree(scan_req);
+ }
+
+ if (priv->assoc_request == 1) {
+ if (!priv->assoc_result) {
+ cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
+ NULL, 0, NULL, 0,
+ WLAN_STATUS_SUCCESS,
+ GFP_KERNEL);
+ dev_dbg(priv->adapter->dev,
+ "info: associated to bssid %pM successfully\n",
+ priv->cfg_bssid);
+ } else {
+ dev_dbg(priv->adapter->dev,
+ "info: association to bssid %pM failed\n",
+ priv->cfg_bssid);
+ memset(priv->cfg_bssid, 0, ETH_ALEN);
+ }
+ priv->assoc_request = 0;
+ priv->assoc_result = 0;
+ }
+
+ if (priv->ibss_join_request == 1) {
+ if (!priv->ibss_join_result) {
+ cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid,
+ GFP_KERNEL);
+ dev_dbg(priv->adapter->dev,
+ "info: joined/created adhoc network with bssid"
+ " %pM successfully\n", priv->cfg_bssid);
+ } else {
+ dev_dbg(priv->adapter->dev,
+ "info: failed creating/joining adhoc network\n");
+ }
+ priv->ibss_join_request = 0;
+ priv->ibss_join_result = 0;
+ }
+
+ if (priv->disconnect) {
+ memset(priv->cfg_bssid, 0, ETH_ALEN);
+ priv->disconnect = 0;
+ }
+}
diff --git a/drivers/net/wireless/mwifiex/cfg80211.h b/drivers/net/wireless/mwifiex/cfg80211.h
new file mode 100644
index 0000000..c4db8f3
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/cfg80211.h
@@ -0,0 +1,31 @@
+/*
+ * Marvell Wireless LAN device driver: CFG80211
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef __MWIFIEX_CFG80211__
+#define __MWIFIEX_CFG80211__
+
+#include <net/cfg80211.h>
+
+#include "main.h"
+
+int mwifiex_register_cfg80211(struct net_device *, u8 *,
+ struct mwifiex_private *);
+
+void mwifiex_cfg80211_results(struct work_struct *work);
+#endif
diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c
new file mode 100644
index 0000000..d0cada5
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/cfp.c
@@ -0,0 +1,360 @@
+/*
+ * Marvell Wireless LAN device driver: Channel, Frequence and Power
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "cfg80211.h"
+
+/* 100mW */
+#define MWIFIEX_TX_PWR_DEFAULT 20
+/* 100mW */
+#define MWIFIEX_TX_PWR_US_DEFAULT 20
+/* 50mW */
+#define MWIFIEX_TX_PWR_JP_DEFAULT 16
+/* 100mW */
+#define MWIFIEX_TX_PWR_FR_100MW 20
+/* 10mW */
+#define MWIFIEX_TX_PWR_FR_10MW 10
+/* 100mW */
+#define MWIFIEX_TX_PWR_EMEA_DEFAULT 20
+
+static u8 adhoc_rates_b[B_SUPPORTED_RATES] = { 0x82, 0x84, 0x8b, 0x96, 0 };
+
+static u8 adhoc_rates_g[G_SUPPORTED_RATES] = { 0x8c, 0x12, 0x98, 0x24,
+ 0xb0, 0x48, 0x60, 0x6c, 0 };
+
+static u8 adhoc_rates_bg[BG_SUPPORTED_RATES] = { 0x82, 0x84, 0x8b, 0x96,
+ 0x0c, 0x12, 0x18, 0x24,
+ 0x30, 0x48, 0x60, 0x6c, 0 };
+
+static u8 adhoc_rates_a[A_SUPPORTED_RATES] = { 0x8c, 0x12, 0x98, 0x24,
+ 0xb0, 0x48, 0x60, 0x6c, 0 };
+u8 supported_rates_a[A_SUPPORTED_RATES] = { 0x0c, 0x12, 0x18, 0x24,
+ 0xb0, 0x48, 0x60, 0x6c, 0 };
+static u16 mwifiex_data_rates[MWIFIEX_SUPPORTED_RATES_EXT] = { 0x02, 0x04,
+ 0x0B, 0x16, 0x00, 0x0C, 0x12, 0x18,
+ 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90,
+ 0x0D, 0x1A, 0x27, 0x34, 0x4E, 0x68,
+ 0x75, 0x82, 0x0C, 0x1B, 0x36, 0x51,
+ 0x6C, 0xA2, 0xD8, 0xF3, 0x10E, 0x00 };
+
+u8 supported_rates_b[B_SUPPORTED_RATES] = { 0x02, 0x04, 0x0b, 0x16, 0 };
+
+u8 supported_rates_g[G_SUPPORTED_RATES] = { 0x0c, 0x12, 0x18, 0x24,
+ 0x30, 0x48, 0x60, 0x6c, 0 };
+
+u8 supported_rates_bg[BG_SUPPORTED_RATES] = { 0x02, 0x04, 0x0b, 0x0c,
+ 0x12, 0x16, 0x18, 0x24, 0x30, 0x48,
+ 0x60, 0x6c, 0 };
+
+u16 region_code_index[MWIFIEX_MAX_REGION_CODE] = { 0x10, 0x20, 0x30,
+ 0x32, 0x40, 0x41, 0xff };
+
+u8 supported_rates_n[N_SUPPORTED_RATES] = { 0x02, 0x04, 0 };
+
+/*
+ * This function maps an index in supported rates table into
+ * the corresponding data rate.
+ */
+u32 mwifiex_index_to_data_rate(u8 index, u8 ht_info)
+{
+ u16 mcs_rate[4][8] = {
+ {0x1b, 0x36, 0x51, 0x6c, 0xa2, 0xd8, 0xf3, 0x10e}
+ , /* LG 40M */
+ {0x1e, 0x3c, 0x5a, 0x78, 0xb4, 0xf0, 0x10e, 0x12c}
+ , /* SG 40M */
+ {0x0d, 0x1a, 0x27, 0x34, 0x4e, 0x68, 0x75, 0x82}
+ , /* LG 20M */
+ {0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90}
+ }; /* SG 20M */
+
+ u32 rate;
+
+ if (ht_info & BIT(0)) {
+ if (index == MWIFIEX_RATE_BITMAP_MCS0) {
+ if (ht_info & BIT(2))
+ rate = 0x0D; /* MCS 32 SGI rate */
+ else
+ rate = 0x0C; /* MCS 32 LGI rate */
+ } else if (index < 8) {
+ if (ht_info & BIT(1)) {
+ if (ht_info & BIT(2))
+ /* SGI, 40M */
+ rate = mcs_rate[1][index];
+ else
+ /* LGI, 40M */
+ rate = mcs_rate[0][index];
+ } else {
+ if (ht_info & BIT(2))
+ /* SGI, 20M */
+ rate = mcs_rate[3][index];
+ else
+ /* LGI, 20M */
+ rate = mcs_rate[2][index];
+ }
+ } else
+ rate = mwifiex_data_rates[0];
+ } else {
+ if (index >= MWIFIEX_SUPPORTED_RATES_EXT)
+ index = 0;
+ rate = mwifiex_data_rates[index];
+ }
+ return rate;
+}
+
+/*
+ * This function maps a data rate value into corresponding index in supported
+ * rates table.
+ */
+u8 mwifiex_data_rate_to_index(u32 rate)
+{
+ u16 *ptr;
+
+ if (rate) {
+ ptr = memchr(mwifiex_data_rates, rate,
+ sizeof(mwifiex_data_rates));
+ if (ptr)
+ return (u8) (ptr - mwifiex_data_rates);
+ }
+ return 0;
+}
+
+/*
+ * This function returns the current active data rates.
+ *
+ * The result may vary depending upon connection status.
+ */
+u32 mwifiex_get_active_data_rates(struct mwifiex_private *priv, u8 *rates)
+{
+ if (!priv->media_connected)
+ return mwifiex_get_supported_rates(priv, rates);
+ else
+ return mwifiex_copy_rates(rates, 0,
+ priv->curr_bss_params.data_rates,
+ priv->curr_bss_params.num_of_rates);
+}
+
+/*
+ * This function locates the Channel-Frequency-Power triplet based upon
+ * band and channel parameters.
+ */
+struct mwifiex_chan_freq_power *
+mwifiex_get_cfp_by_band_and_channel_from_cfg80211(struct mwifiex_private
+ *priv, u8 band, u16 channel)
+{
+ struct mwifiex_chan_freq_power *cfp = NULL;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *ch;
+ int i;
+
+ if (mwifiex_band_to_radio_type(band) == HostCmd_SCAN_RADIO_TYPE_BG)
+ sband = priv->wdev->wiphy->bands[IEEE80211_BAND_2GHZ];
+ else
+ sband = priv->wdev->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+ if (!sband) {
+ dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d"
+ " & channel %d\n", __func__, band, channel);
+ return cfp;
+ }
+
+ for (i = 0; i < sband->n_channels; i++) {
+ ch = &sband->channels[i];
+ if (((ch->hw_value == channel) ||
+ (channel == FIRST_VALID_CHANNEL))
+ && !(ch->flags & IEEE80211_CHAN_DISABLED)) {
+ priv->cfp.channel = channel;
+ priv->cfp.freq = ch->center_freq;
+ priv->cfp.max_tx_power = ch->max_power;
+ cfp = &priv->cfp;
+ break;
+ }
+ }
+ if (i == sband->n_channels)
+ dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d"
+ " & channel %d\n", __func__, band, channel);
+
+ return cfp;
+}
+
+/*
+ * This function locates the Channel-Frequency-Power triplet based upon
+ * band and frequency parameters.
+ */
+struct mwifiex_chan_freq_power *
+mwifiex_get_cfp_by_band_and_freq_from_cfg80211(struct mwifiex_private *priv,
+ u8 band, u32 freq)
+{
+ struct mwifiex_chan_freq_power *cfp = NULL;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *ch;
+ int i;
+
+ if (mwifiex_band_to_radio_type(band) == HostCmd_SCAN_RADIO_TYPE_BG)
+ sband = priv->wdev->wiphy->bands[IEEE80211_BAND_2GHZ];
+ else
+ sband = priv->wdev->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+ if (!sband) {
+ dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d"
+ " & freq %d\n", __func__, band, freq);
+ return cfp;
+ }
+
+ for (i = 0; i < sband->n_channels; i++) {
+ ch = &sband->channels[i];
+ if ((ch->center_freq == freq) &&
+ !(ch->flags & IEEE80211_CHAN_DISABLED)) {
+ priv->cfp.channel = ch->hw_value;
+ priv->cfp.freq = freq;
+ priv->cfp.max_tx_power = ch->max_power;
+ cfp = &priv->cfp;
+ break;
+ }
+ }
+ if (i == sband->n_channels)
+ dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d"
+ " & freq %d\n", __func__, band, freq);
+
+ return cfp;
+}
+
+/*
+ * This function checks if the data rate is set to auto.
+ */
+u8
+mwifiex_is_rate_auto(struct mwifiex_private *priv)
+{
+ u32 i;
+ int rate_num = 0;
+
+ for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates); i++)
+ if (priv->bitmap_rates[i])
+ rate_num++;
+
+ if (rate_num > 1)
+ return true;
+ else
+ return false;
+}
+
+/*
+ * This function converts rate bitmap into rate index.
+ */
+int mwifiex_get_rate_index(u16 *rate_bitmap, int size)
+{
+ int i;
+
+ for (i = 0; i < size * 8; i++)
+ if (rate_bitmap[i / 16] & (1 << (i % 16)))
+ return i;
+
+ return 0;
+}
+
+/*
+ * This function gets the supported data rates.
+ *
+ * The function works in both Ad-Hoc and infra mode by printing the
+ * band and returning the data rates.
+ */
+u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates)
+{
+ u32 k = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ switch (adapter->config_bands) {
+ case BAND_B:
+ dev_dbg(adapter->dev, "info: infra band=%d "
+ "supported_rates_b\n", adapter->config_bands);
+ k = mwifiex_copy_rates(rates, k, supported_rates_b,
+ sizeof(supported_rates_b));
+ break;
+ case BAND_G:
+ case BAND_G | BAND_GN:
+ dev_dbg(adapter->dev, "info: infra band=%d "
+ "supported_rates_g\n", adapter->config_bands);
+ k = mwifiex_copy_rates(rates, k, supported_rates_g,
+ sizeof(supported_rates_g));
+ break;
+ case BAND_B | BAND_G:
+ case BAND_A | BAND_B | BAND_G:
+ case BAND_A | BAND_B:
+ case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN:
+ case BAND_B | BAND_G | BAND_GN:
+ dev_dbg(adapter->dev, "info: infra band=%d "
+ "supported_rates_bg\n", adapter->config_bands);
+ k = mwifiex_copy_rates(rates, k, supported_rates_bg,
+ sizeof(supported_rates_bg));
+ break;
+ case BAND_A:
+ case BAND_A | BAND_G:
+ dev_dbg(adapter->dev, "info: infra band=%d "
+ "supported_rates_a\n", adapter->config_bands);
+ k = mwifiex_copy_rates(rates, k, supported_rates_a,
+ sizeof(supported_rates_a));
+ break;
+ case BAND_A | BAND_AN:
+ case BAND_A | BAND_G | BAND_AN | BAND_GN:
+ dev_dbg(adapter->dev, "info: infra band=%d "
+ "supported_rates_a\n", adapter->config_bands);
+ k = mwifiex_copy_rates(rates, k, supported_rates_a,
+ sizeof(supported_rates_a));
+ break;
+ case BAND_GN:
+ dev_dbg(adapter->dev, "info: infra band=%d "
+ "supported_rates_n\n", adapter->config_bands);
+ k = mwifiex_copy_rates(rates, k, supported_rates_n,
+ sizeof(supported_rates_n));
+ break;
+ }
+ } else {
+ /* Ad-hoc mode */
+ switch (adapter->adhoc_start_band) {
+ case BAND_B:
+ dev_dbg(adapter->dev, "info: adhoc B\n");
+ k = mwifiex_copy_rates(rates, k, adhoc_rates_b,
+ sizeof(adhoc_rates_b));
+ break;
+ case BAND_G:
+ case BAND_G | BAND_GN:
+ dev_dbg(adapter->dev, "info: adhoc G only\n");
+ k = mwifiex_copy_rates(rates, k, adhoc_rates_g,
+ sizeof(adhoc_rates_g));
+ break;
+ case BAND_B | BAND_G:
+ case BAND_B | BAND_G | BAND_GN:
+ dev_dbg(adapter->dev, "info: adhoc BG\n");
+ k = mwifiex_copy_rates(rates, k, adhoc_rates_bg,
+ sizeof(adhoc_rates_bg));
+ break;
+ case BAND_A:
+ case BAND_A | BAND_AN:
+ dev_dbg(adapter->dev, "info: adhoc A\n");
+ k = mwifiex_copy_rates(rates, k, adhoc_rates_a,
+ sizeof(adhoc_rates_a));
+ break;
+ }
+ }
+
+ return k;
+}
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
new file mode 100644
index 0000000..cd89fed
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -0,0 +1,1414 @@
+/*
+ * Marvell Wireless LAN device driver: commands and events
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+/*
+ * This function initializes a command node.
+ *
+ * The actual allocation of the node is not done by this function. It only
+ * initiates a node by filling it with default parameters. Similarly,
+ * allocation of the different buffers used (IOCTL buffer, data buffer) are
+ * not done by this function either.
+ */
+static void
+mwifiex_init_cmd_node(struct mwifiex_private *priv,
+ struct cmd_ctrl_node *cmd_node,
+ u32 cmd_oid, void *data_buf)
+{
+ cmd_node->priv = priv;
+ cmd_node->cmd_oid = cmd_oid;
+ cmd_node->wait_q_enabled = priv->adapter->cmd_wait_q_required;
+ priv->adapter->cmd_wait_q_required = false;
+ cmd_node->data_buf = data_buf;
+ cmd_node->cmd_skb = cmd_node->skb;
+}
+
+/*
+ * This function returns a command node from the free queue depending upon
+ * availability.
+ */
+static struct cmd_ctrl_node *
+mwifiex_get_cmd_node(struct mwifiex_adapter *adapter)
+{
+ struct cmd_ctrl_node *cmd_node;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->cmd_free_q_lock, flags);
+ if (list_empty(&adapter->cmd_free_q)) {
+ dev_err(adapter->dev, "GET_CMD_NODE: cmd node not available\n");
+ spin_unlock_irqrestore(&adapter->cmd_free_q_lock, flags);
+ return NULL;
+ }
+ cmd_node = list_first_entry(&adapter->cmd_free_q,
+ struct cmd_ctrl_node, list);
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->cmd_free_q_lock, flags);
+
+ return cmd_node;
+}
+
+/*
+ * This function cleans up a command node.
+ *
+ * The function resets the fields including the buffer pointers.
+ * This function does not try to free the buffers. They must be
+ * freed before calling this function.
+ *
+ * This function will however call the receive completion callback
+ * in case a response buffer is still available before resetting
+ * the pointer.
+ */
+static void
+mwifiex_clean_cmd_node(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_node)
+{
+ cmd_node->cmd_oid = 0;
+ cmd_node->cmd_flag = 0;
+ cmd_node->data_buf = NULL;
+ cmd_node->wait_q_enabled = false;
+
+ if (cmd_node->resp_skb) {
+ dev_kfree_skb_any(cmd_node->resp_skb);
+ cmd_node->resp_skb = NULL;
+ }
+}
+
+/*
+ * This function sends a host command to the firmware.
+ *
+ * The function copies the host command into the driver command
+ * buffer, which will be transferred to the firmware later by the
+ * main thread.
+ */
+static int mwifiex_cmd_host_cmd(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd, void *data_buf)
+{
+ struct mwifiex_ds_misc_cmd *pcmd_ptr =
+ (struct mwifiex_ds_misc_cmd *) data_buf;
+
+ /* Copy the HOST command to command buffer */
+ memcpy((void *) cmd, pcmd_ptr->cmd, pcmd_ptr->len);
+ dev_dbg(priv->adapter->dev, "cmd: host cmd size = %d\n", pcmd_ptr->len);
+ return 0;
+}
+
+/*
+ * This function downloads a command to the firmware.
+ *
+ * The function performs sanity tests, sets the command sequence
+ * number and size, converts the header fields to CPU format before
+ * sending. Afterwards, it logs the command ID and action for debugging
+ * and sets up the command timeout timer.
+ */
+static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
+ struct cmd_ctrl_node *cmd_node)
+{
+
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int ret;
+ struct host_cmd_ds_command *host_cmd;
+ uint16_t cmd_code;
+ uint16_t cmd_size;
+ struct timeval tstamp;
+ unsigned long flags;
+
+ if (!adapter || !cmd_node)
+ return -1;
+
+ host_cmd = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data);
+
+ /* Sanity test */
+ if (host_cmd == NULL || host_cmd->size == 0) {
+ dev_err(adapter->dev, "DNLD_CMD: host_cmd is null"
+ " or cmd size is 0, not sending\n");
+ if (cmd_node->wait_q_enabled)
+ adapter->cmd_wait_q.status = -1;
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ return -1;
+ }
+
+ /* Set command sequence number */
+ adapter->seq_num++;
+ host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
+ (adapter->seq_num, cmd_node->priv->bss_num,
+ cmd_node->priv->bss_type));
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd = cmd_node;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+
+ cmd_code = le16_to_cpu(host_cmd->command);
+ cmd_size = le16_to_cpu(host_cmd->size);
+
+ skb_trim(cmd_node->cmd_skb, cmd_size);
+
+ do_gettimeofday(&tstamp);
+ dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
+ " seqno %#x\n",
+ tstamp.tv_sec, tstamp.tv_usec, cmd_code,
+ le16_to_cpu(*(__le16 *) ((u8 *) host_cmd + S_DS_GEN)), cmd_size,
+ le16_to_cpu(host_cmd->seq_num));
+
+ skb_push(cmd_node->cmd_skb, INTF_HEADER_LEN);
+
+ ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_CMD,
+ cmd_node->cmd_skb->data,
+ cmd_node->cmd_skb->len, NULL);
+
+ skb_pull(cmd_node->cmd_skb, INTF_HEADER_LEN);
+
+ if (ret == -1) {
+ dev_err(adapter->dev, "DNLD_CMD: host to card failed\n");
+ if (cmd_node->wait_q_enabled)
+ adapter->cmd_wait_q.status = -1;
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd = NULL;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+
+ adapter->dbg.num_cmd_host_to_card_failure++;
+ return -1;
+ }
+
+ /* Save the last command id and action to debug log */
+ adapter->dbg.last_cmd_index =
+ (adapter->dbg.last_cmd_index + 1) % DBG_CMD_NUM;
+ adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index] = cmd_code;
+ adapter->dbg.last_cmd_act[adapter->dbg.last_cmd_index] =
+ le16_to_cpu(*(__le16 *) ((u8 *) host_cmd + S_DS_GEN));
+
+ /* Clear BSS_NO_BITS from HostCmd */
+ cmd_code &= HostCmd_CMD_ID_MASK;
+
+ /* Setup the timer after transmit command */
+ mod_timer(&adapter->cmd_timer,
+ jiffies + (MWIFIEX_TIMER_10S * HZ) / 1000);
+
+ return 0;
+}
+
+/*
+ * This function downloads a sleep confirm command to the firmware.
+ *
+ * The function performs sanity tests, sets the command sequence
+ * number and size, converts the header fields to CPU format before
+ * sending.
+ *
+ * No responses are needed for sleep confirm command.
+ */
+static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter)
+{
+ int ret;
+ struct mwifiex_private *priv;
+ struct mwifiex_opt_sleep_confirm *sleep_cfm_buf =
+ (struct mwifiex_opt_sleep_confirm *)
+ adapter->sleep_cfm->data;
+ priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+
+ sleep_cfm_buf->seq_num =
+ cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO
+ (adapter->seq_num, priv->bss_num,
+ priv->bss_type)));
+ adapter->seq_num++;
+
+ skb_push(adapter->sleep_cfm, INTF_HEADER_LEN);
+ ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_CMD,
+ adapter->sleep_cfm->data,
+ adapter->sleep_cfm->len, NULL);
+ skb_pull(adapter->sleep_cfm, INTF_HEADER_LEN);
+
+ if (ret == -1) {
+ dev_err(adapter->dev, "SLEEP_CFM: failed\n");
+ adapter->dbg.num_cmd_sleep_cfm_host_to_card_failure++;
+ return -1;
+ }
+ if (GET_BSS_ROLE(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY))
+ == MWIFIEX_BSS_ROLE_STA) {
+ if (!sleep_cfm_buf->resp_ctrl)
+ /* Response is not needed for sleep
+ confirm command */
+ adapter->ps_state = PS_STATE_SLEEP;
+ else
+ adapter->ps_state = PS_STATE_SLEEP_CFM;
+
+ if (!sleep_cfm_buf->resp_ctrl
+ && (adapter->is_hs_configured
+ && !adapter->sleep_period.period)) {
+ adapter->pm_wakeup_card_req = true;
+ mwifiex_hs_activated_event(mwifiex_get_priv(adapter,
+ MWIFIEX_BSS_ROLE_STA), true);
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * This function allocates the command buffers and links them to
+ * the command free queue.
+ *
+ * The driver uses a pre allocated number of command buffers, which
+ * are created at driver initializations and freed at driver cleanup.
+ * Every command needs to obtain a command buffer from this pool before
+ * it can be issued. The command free queue lists the command buffers
+ * currently free to use, while the command pending queue lists the
+ * command buffers already in use and awaiting handling. Command buffers
+ * are returned to the free queue after use.
+ */
+int mwifiex_alloc_cmd_buffer(struct mwifiex_adapter *adapter)
+{
+ struct cmd_ctrl_node *cmd_array;
+ u32 buf_size;
+ u32 i;
+
+ /* Allocate and initialize struct cmd_ctrl_node */
+ buf_size = sizeof(struct cmd_ctrl_node) * MWIFIEX_NUM_OF_CMD_BUFFER;
+ cmd_array = kzalloc(buf_size, GFP_KERNEL);
+ if (!cmd_array) {
+ dev_err(adapter->dev, "%s: failed to alloc cmd_array\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ adapter->cmd_pool = cmd_array;
+ memset(adapter->cmd_pool, 0, buf_size);
+
+ /* Allocate and initialize command buffers */
+ for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++) {
+ cmd_array[i].skb = dev_alloc_skb(MWIFIEX_SIZE_OF_CMD_BUFFER);
+ if (!cmd_array[i].skb) {
+ dev_err(adapter->dev, "ALLOC_CMD_BUF: out of memory\n");
+ return -1;
+ }
+ }
+
+ for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++)
+ mwifiex_insert_cmd_to_free_q(adapter, &cmd_array[i]);
+
+ return 0;
+}
+
+/*
+ * This function frees the command buffers.
+ *
+ * The function calls the completion callback for all the command
+ * buffers that still have response buffers associated with them.
+ */
+int mwifiex_free_cmd_buffer(struct mwifiex_adapter *adapter)
+{
+ struct cmd_ctrl_node *cmd_array;
+ u32 i;
+
+ /* Need to check if cmd pool is allocated or not */
+ if (!adapter->cmd_pool) {
+ dev_dbg(adapter->dev, "info: FREE_CMD_BUF: cmd_pool is null\n");
+ return 0;
+ }
+
+ cmd_array = adapter->cmd_pool;
+
+ /* Release shared memory buffers */
+ for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++) {
+ if (cmd_array[i].skb) {
+ dev_dbg(adapter->dev, "cmd: free cmd buffer %d\n", i);
+ dev_kfree_skb_any(cmd_array[i].skb);
+ }
+ if (!cmd_array[i].resp_skb)
+ continue;
+ dev_kfree_skb_any(cmd_array[i].resp_skb);
+ }
+ /* Release struct cmd_ctrl_node */
+ if (adapter->cmd_pool) {
+ dev_dbg(adapter->dev, "cmd: free cmd pool\n");
+ kfree(adapter->cmd_pool);
+ adapter->cmd_pool = NULL;
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles events generated by firmware.
+ *
+ * Event body of events received from firmware are not used (though they are
+ * saved), only the event ID is used. Some events are re-invoked by
+ * the driver, with a new event body.
+ *
+ * After processing, the function calls the completion callback
+ * for cleanup.
+ */
+int mwifiex_process_event(struct mwifiex_adapter *adapter)
+{
+ int ret;
+ struct mwifiex_private *priv =
+ mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ struct sk_buff *skb = adapter->event_skb;
+ u32 eventcause = adapter->event_cause;
+ struct timeval tstamp;
+ struct mwifiex_rxinfo *rx_info;
+
+ /* Save the last event to debug log */
+ adapter->dbg.last_event_index =
+ (adapter->dbg.last_event_index + 1) % DBG_CMD_NUM;
+ adapter->dbg.last_event[adapter->dbg.last_event_index] =
+ (u16) eventcause;
+
+ /* Get BSS number and corresponding priv */
+ priv = mwifiex_get_priv_by_id(adapter, EVENT_GET_BSS_NUM(eventcause),
+ EVENT_GET_BSS_TYPE(eventcause));
+ if (!priv)
+ priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ /* Clear BSS_NO_BITS from event */
+ eventcause &= EVENT_ID_MASK;
+ adapter->event_cause = eventcause;
+
+ if (skb) {
+ rx_info = MWIFIEX_SKB_RXCB(skb);
+ rx_info->bss_index = priv->bss_index;
+ }
+
+ if (eventcause != EVENT_PS_SLEEP && eventcause != EVENT_PS_AWAKE) {
+ do_gettimeofday(&tstamp);
+ dev_dbg(adapter->dev, "event: %lu.%lu: cause: %#x\n",
+ tstamp.tv_sec, tstamp.tv_usec, eventcause);
+ }
+
+ ret = mwifiex_process_sta_event(priv);
+
+ adapter->event_cause = 0;
+ adapter->event_skb = NULL;
+
+ dev_kfree_skb_any(skb);
+
+ return ret;
+}
+
+/*
+ * This function is used to send synchronous command to the firmware.
+ *
+ * it allocates a wait queue for the command and wait for the command
+ * response.
+ */
+int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid, void *data_buf)
+{
+ int ret = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ adapter->cmd_wait_q_required = true;
+ adapter->cmd_wait_q.condition = false;
+
+ ret = mwifiex_send_cmd_async(priv, cmd_no, cmd_action, cmd_oid,
+ data_buf);
+ if (!ret)
+ ret = mwifiex_wait_queue_complete(adapter);
+
+ return ret;
+}
+
+
+/*
+ * This function prepares a command and asynchronously send it to the firmware.
+ *
+ * Preparation includes -
+ * - Sanity tests to make sure the card is still present or the FW
+ * is not reset
+ * - Getting a new command node from the command free queue
+ * - Initializing the command node for default parameters
+ * - Fill up the non-default parameters and buffer pointers
+ * - Add the command to pending queue
+ */
+int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid, void *data_buf)
+{
+ int ret;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct cmd_ctrl_node *cmd_node;
+ struct host_cmd_ds_command *cmd_ptr;
+
+ if (!adapter) {
+ pr_err("PREP_CMD: adapter is NULL\n");
+ return -1;
+ }
+
+ if (adapter->is_suspended) {
+ dev_err(adapter->dev, "PREP_CMD: device in suspended state\n");
+ return -1;
+ }
+
+ if (adapter->surprise_removed) {
+ dev_err(adapter->dev, "PREP_CMD: card is removed\n");
+ return -1;
+ }
+
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET) {
+ if (cmd_no != HostCmd_CMD_FUNC_INIT) {
+ dev_err(adapter->dev, "PREP_CMD: FW in reset state\n");
+ return -1;
+ }
+ }
+
+ /* Get a new command node */
+ cmd_node = mwifiex_get_cmd_node(adapter);
+
+ if (!cmd_node) {
+ dev_err(adapter->dev, "PREP_CMD: no free cmd node\n");
+ return -1;
+ }
+
+ /* Initialize the command node */
+ mwifiex_init_cmd_node(priv, cmd_node, cmd_oid, data_buf);
+
+ if (!cmd_node->cmd_skb) {
+ dev_err(adapter->dev, "PREP_CMD: no free cmd buf\n");
+ return -1;
+ }
+
+ memset(skb_put(cmd_node->cmd_skb, sizeof(struct host_cmd_ds_command)),
+ 0, sizeof(struct host_cmd_ds_command));
+
+ cmd_ptr = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data);
+ cmd_ptr->command = cpu_to_le16(cmd_no);
+ cmd_ptr->result = 0;
+
+ /* Prepare command */
+ if (cmd_no) {
+ ret = mwifiex_sta_prepare_cmd(priv, cmd_no, cmd_action,
+ cmd_oid, data_buf, cmd_ptr);
+ } else {
+ ret = mwifiex_cmd_host_cmd(priv, cmd_ptr, data_buf);
+ cmd_node->cmd_flag |= CMD_F_HOSTCMD;
+ }
+
+ /* Return error, since the command preparation failed */
+ if (ret) {
+ dev_err(adapter->dev, "PREP_CMD: cmd %#x preparation failed\n",
+ cmd_no);
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ return -1;
+ }
+
+ /* Send command */
+ if (cmd_no == HostCmd_CMD_802_11_SCAN)
+ mwifiex_queue_scan_cmd(priv, cmd_node);
+ else
+ mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
+
+ return ret;
+}
+
+/*
+ * This function returns a command to the command free queue.
+ *
+ * The function also calls the completion callback if required, before
+ * cleaning the command node and re-inserting it into the free queue.
+ */
+void
+mwifiex_insert_cmd_to_free_q(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_node)
+{
+ unsigned long flags;
+
+ if (!cmd_node)
+ return;
+
+ if (cmd_node->wait_q_enabled)
+ mwifiex_complete_cmd(adapter);
+ /* Clean the node */
+ mwifiex_clean_cmd_node(adapter, cmd_node);
+
+ /* Insert node into cmd_free_q */
+ spin_lock_irqsave(&adapter->cmd_free_q_lock, flags);
+ list_add_tail(&cmd_node->list, &adapter->cmd_free_q);
+ spin_unlock_irqrestore(&adapter->cmd_free_q_lock, flags);
+}
+
+/*
+ * This function queues a command to the command pending queue.
+ *
+ * This in effect adds the command to the command list to be executed.
+ * Exit PS command is handled specially, by placing it always to the
+ * front of the command queue.
+ */
+void
+mwifiex_insert_cmd_to_pending_q(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_node, u32 add_tail)
+{
+ struct host_cmd_ds_command *host_cmd = NULL;
+ u16 command;
+ unsigned long flags;
+
+ host_cmd = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data);
+ if (!host_cmd) {
+ dev_err(adapter->dev, "QUEUE_CMD: host_cmd is NULL\n");
+ return;
+ }
+
+ command = le16_to_cpu(host_cmd->command);
+
+ /* Exit_PS command needs to be queued in the header always. */
+ if (command == HostCmd_CMD_802_11_PS_MODE_ENH) {
+ struct host_cmd_ds_802_11_ps_mode_enh *pm =
+ &host_cmd->params.psmode_enh;
+ if ((le16_to_cpu(pm->action) == DIS_PS)
+ || (le16_to_cpu(pm->action) == DIS_AUTO_PS)) {
+ if (adapter->ps_state != PS_STATE_AWAKE)
+ add_tail = false;
+ }
+ }
+
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags);
+ if (add_tail)
+ list_add_tail(&cmd_node->list, &adapter->cmd_pending_q);
+ else
+ list_add(&cmd_node->list, &adapter->cmd_pending_q);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
+
+ dev_dbg(adapter->dev, "cmd: QUEUE_CMD: cmd=%#x is queued\n", command);
+}
+
+/*
+ * This function executes the next command in command pending queue.
+ *
+ * This function will fail if a command is already in processing stage,
+ * otherwise it will dequeue the first command from the command pending
+ * queue and send to the firmware.
+ *
+ * If the device is currently in host sleep mode, any commands, except the
+ * host sleep configuration command will de-activate the host sleep. For PS
+ * mode, the function will put the firmware back to sleep if applicable.
+ */
+int mwifiex_exec_next_cmd(struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_private *priv;
+ struct cmd_ctrl_node *cmd_node;
+ int ret = 0;
+ struct host_cmd_ds_command *host_cmd;
+ unsigned long cmd_flags;
+ unsigned long cmd_pending_q_flags;
+
+ /* Check if already in processing */
+ if (adapter->curr_cmd) {
+ dev_err(adapter->dev, "EXEC_NEXT_CMD: cmd in processing\n");
+ return -1;
+ }
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
+ /* Check if any command is pending */
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, cmd_pending_q_flags);
+ if (list_empty(&adapter->cmd_pending_q)) {
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock,
+ cmd_pending_q_flags);
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+ return 0;
+ }
+ cmd_node = list_first_entry(&adapter->cmd_pending_q,
+ struct cmd_ctrl_node, list);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock,
+ cmd_pending_q_flags);
+
+ host_cmd = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data);
+ priv = cmd_node->priv;
+
+ if (adapter->ps_state != PS_STATE_AWAKE) {
+ dev_err(adapter->dev, "%s: cannot send cmd in sleep state,"
+ " this should not happen\n", __func__);
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+ return ret;
+ }
+
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, cmd_pending_q_flags);
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock,
+ cmd_pending_q_flags);
+
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+ ret = mwifiex_dnld_cmd_to_fw(priv, cmd_node);
+ priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ /* Any command sent to the firmware when host is in sleep
+ * mode should de-configure host sleep. We should skip the
+ * host sleep configuration command itself though
+ */
+ if (priv && (host_cmd->command !=
+ cpu_to_le16(HostCmd_CMD_802_11_HS_CFG_ENH))) {
+ if (adapter->hs_activated) {
+ adapter->is_hs_configured = false;
+ mwifiex_hs_activated_event(priv, false);
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * This function handles the command response.
+ *
+ * After processing, the function cleans the command node and puts
+ * it back to the command free queue.
+ */
+int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter)
+{
+ struct host_cmd_ds_command *resp;
+ struct mwifiex_private *priv =
+ mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ int ret = 0;
+ uint16_t orig_cmdresp_no;
+ uint16_t cmdresp_no;
+ uint16_t cmdresp_result;
+ struct timeval tstamp;
+ unsigned long flags;
+
+ /* Now we got response from FW, cancel the command timer */
+ del_timer(&adapter->cmd_timer);
+
+ if (!adapter->curr_cmd || !adapter->curr_cmd->resp_skb) {
+ resp = (struct host_cmd_ds_command *) adapter->upld_buf;
+ dev_err(adapter->dev, "CMD_RESP: NULL curr_cmd, %#x\n",
+ le16_to_cpu(resp->command));
+ return -1;
+ }
+
+ adapter->num_cmd_timeout = 0;
+
+ resp = (struct host_cmd_ds_command *) adapter->curr_cmd->resp_skb->data;
+ if (adapter->curr_cmd->cmd_flag & CMD_F_CANCELED) {
+ dev_err(adapter->dev, "CMD_RESP: %#x been canceled\n",
+ le16_to_cpu(resp->command));
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd = NULL;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ return -1;
+ }
+
+ if (adapter->curr_cmd->cmd_flag & CMD_F_HOSTCMD) {
+ /* Copy original response back to response buffer */
+ struct mwifiex_ds_misc_cmd *hostcmd = NULL;
+ uint16_t size = le16_to_cpu(resp->size);
+ dev_dbg(adapter->dev, "info: host cmd resp size = %d\n", size);
+ size = min_t(u16, size, MWIFIEX_SIZE_OF_CMD_BUFFER);
+ if (adapter->curr_cmd->data_buf) {
+ hostcmd = (struct mwifiex_ds_misc_cmd *)
+ adapter->curr_cmd->data_buf;
+ hostcmd->len = size;
+ memcpy(hostcmd->cmd, (void *) resp, size);
+ }
+ }
+ orig_cmdresp_no = le16_to_cpu(resp->command);
+
+ /* Get BSS number and corresponding priv */
+ priv = mwifiex_get_priv_by_id(adapter,
+ HostCmd_GET_BSS_NO(le16_to_cpu(resp->seq_num)),
+ HostCmd_GET_BSS_TYPE(le16_to_cpu(resp->seq_num)));
+ if (!priv)
+ priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ /* Clear RET_BIT from HostCmd */
+ resp->command = cpu_to_le16(orig_cmdresp_no & HostCmd_CMD_ID_MASK);
+
+ cmdresp_no = le16_to_cpu(resp->command);
+ cmdresp_result = le16_to_cpu(resp->result);
+
+ /* Save the last command response to debug log */
+ adapter->dbg.last_cmd_resp_index =
+ (adapter->dbg.last_cmd_resp_index + 1) % DBG_CMD_NUM;
+ adapter->dbg.last_cmd_resp_id[adapter->dbg.last_cmd_resp_index] =
+ orig_cmdresp_no;
+
+ do_gettimeofday(&tstamp);
+ dev_dbg(adapter->dev, "cmd: CMD_RESP: (%lu.%lu): 0x%x, result %d,"
+ " len %d, seqno 0x%x\n",
+ tstamp.tv_sec, tstamp.tv_usec, orig_cmdresp_no, cmdresp_result,
+ le16_to_cpu(resp->size), le16_to_cpu(resp->seq_num));
+
+ if (!(orig_cmdresp_no & HostCmd_RET_BIT)) {
+ dev_err(adapter->dev, "CMD_RESP: invalid cmd resp\n");
+ if (adapter->curr_cmd->wait_q_enabled)
+ adapter->cmd_wait_q.status = -1;
+
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd = NULL;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ return -1;
+ }
+
+ if (adapter->curr_cmd->cmd_flag & CMD_F_HOSTCMD) {
+ adapter->curr_cmd->cmd_flag &= ~CMD_F_HOSTCMD;
+ if ((cmdresp_result == HostCmd_RESULT_OK)
+ && (cmdresp_no == HostCmd_CMD_802_11_HS_CFG_ENH))
+ ret = mwifiex_ret_802_11_hs_cfg(priv, resp);
+ } else {
+ /* handle response */
+ ret = mwifiex_process_sta_cmdresp(priv, cmdresp_no, resp);
+ }
+
+ /* Check init command response */
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) {
+ if (ret == -1) {
+ dev_err(adapter->dev, "%s: cmd %#x failed during "
+ "initialization\n", __func__, cmdresp_no);
+ mwifiex_init_fw_complete(adapter);
+ return -1;
+ } else if (adapter->last_init_cmd == cmdresp_no)
+ adapter->hw_status = MWIFIEX_HW_STATUS_INIT_DONE;
+ }
+
+ if (adapter->curr_cmd) {
+ if (adapter->curr_cmd->wait_q_enabled && (!ret))
+ adapter->cmd_wait_q.status = 0;
+ else if (adapter->curr_cmd->wait_q_enabled && (ret == -1))
+ adapter->cmd_wait_q.status = -1;
+
+ /* Clean up and put current command back to cmd_free_q */
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd = NULL;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ }
+
+ return ret;
+}
+
+/*
+ * This function handles the timeout of command sending.
+ *
+ * It will re-send the same command again.
+ */
+void
+mwifiex_cmd_timeout_func(unsigned long function_context)
+{
+ struct mwifiex_adapter *adapter =
+ (struct mwifiex_adapter *) function_context;
+ struct cmd_ctrl_node *cmd_node;
+ struct timeval tstamp;
+
+ adapter->num_cmd_timeout++;
+ adapter->dbg.num_cmd_timeout++;
+ if (!adapter->curr_cmd) {
+ dev_dbg(adapter->dev, "cmd: empty curr_cmd\n");
+ return;
+ }
+ cmd_node = adapter->curr_cmd;
+ if (cmd_node->wait_q_enabled)
+ adapter->cmd_wait_q.status = -ETIMEDOUT;
+
+ if (cmd_node) {
+ adapter->dbg.timeout_cmd_id =
+ adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index];
+ adapter->dbg.timeout_cmd_act =
+ adapter->dbg.last_cmd_act[adapter->dbg.last_cmd_index];
+ do_gettimeofday(&tstamp);
+ dev_err(adapter->dev, "%s: Timeout cmd id (%lu.%lu) = %#x,"
+ " act = %#x\n", __func__,
+ tstamp.tv_sec, tstamp.tv_usec,
+ adapter->dbg.timeout_cmd_id,
+ adapter->dbg.timeout_cmd_act);
+
+ dev_err(adapter->dev, "num_data_h2c_failure = %d\n",
+ adapter->dbg.num_tx_host_to_card_failure);
+ dev_err(adapter->dev, "num_cmd_h2c_failure = %d\n",
+ adapter->dbg.num_cmd_host_to_card_failure);
+
+ dev_err(adapter->dev, "num_cmd_timeout = %d\n",
+ adapter->dbg.num_cmd_timeout);
+ dev_err(adapter->dev, "num_tx_timeout = %d\n",
+ adapter->dbg.num_tx_timeout);
+
+ dev_err(adapter->dev, "last_cmd_index = %d\n",
+ adapter->dbg.last_cmd_index);
+ print_hex_dump_bytes("last_cmd_id: ", DUMP_PREFIX_OFFSET,
+ adapter->dbg.last_cmd_id, DBG_CMD_NUM);
+ print_hex_dump_bytes("last_cmd_act: ", DUMP_PREFIX_OFFSET,
+ adapter->dbg.last_cmd_act, DBG_CMD_NUM);
+
+ dev_err(adapter->dev, "last_cmd_resp_index = %d\n",
+ adapter->dbg.last_cmd_resp_index);
+ print_hex_dump_bytes("last_cmd_resp_id: ", DUMP_PREFIX_OFFSET,
+ adapter->dbg.last_cmd_resp_id, DBG_CMD_NUM);
+
+ dev_err(adapter->dev, "last_event_index = %d\n",
+ adapter->dbg.last_event_index);
+ print_hex_dump_bytes("last_event: ", DUMP_PREFIX_OFFSET,
+ adapter->dbg.last_event, DBG_CMD_NUM);
+
+ dev_err(adapter->dev, "data_sent=%d cmd_sent=%d\n",
+ adapter->data_sent, adapter->cmd_sent);
+
+ dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n",
+ adapter->ps_mode, adapter->ps_state);
+ }
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING)
+ mwifiex_init_fw_complete(adapter);
+}
+
+/*
+ * This function cancels all the pending commands.
+ *
+ * The current command, all commands in command pending queue and all scan
+ * commands in scan pending queue are cancelled. All the completion callbacks
+ * are called with failure status to ensure cleanup.
+ */
+void
+mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter)
+{
+ struct cmd_ctrl_node *cmd_node = NULL, *tmp_node;
+ unsigned long flags;
+
+ /* Cancel current cmd */
+ if ((adapter->curr_cmd) && (adapter->curr_cmd->wait_q_enabled)) {
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd->wait_q_enabled = false;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ adapter->cmd_wait_q.status = -1;
+ mwifiex_complete_cmd(adapter);
+ }
+ /* Cancel all pending command */
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags);
+ list_for_each_entry_safe(cmd_node, tmp_node,
+ &adapter->cmd_pending_q, list) {
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
+
+ if (cmd_node->wait_q_enabled) {
+ adapter->cmd_wait_q.status = -1;
+ mwifiex_complete_cmd(adapter);
+ cmd_node->wait_q_enabled = false;
+ }
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags);
+ }
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
+
+ /* Cancel all pending scan command */
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ list_for_each_entry_safe(cmd_node, tmp_node,
+ &adapter->scan_pending_q, list) {
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+
+ cmd_node->wait_q_enabled = false;
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ }
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->scan_processing = false;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+}
+
+/*
+ * This function cancels all pending commands that matches with
+ * the given IOCTL request.
+ *
+ * Both the current command buffer and the pending command queue are
+ * searched for matching IOCTL request. The completion callback of
+ * the matched command is called with failure status to ensure cleanup.
+ * In case of scan commands, all pending commands in scan pending queue
+ * are cancelled.
+ */
+void
+mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
+{
+ struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL;
+ unsigned long cmd_flags;
+ unsigned long cmd_pending_q_flags;
+ unsigned long scan_pending_q_flags;
+ uint16_t cancel_scan_cmd = false;
+
+ if ((adapter->curr_cmd) &&
+ (adapter->curr_cmd->wait_q_enabled)) {
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
+ cmd_node = adapter->curr_cmd;
+ cmd_node->wait_q_enabled = false;
+ cmd_node->cmd_flag |= CMD_F_CANCELED;
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock,
+ cmd_pending_q_flags);
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock,
+ cmd_pending_q_flags);
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+ }
+
+ /* Cancel all pending scan command */
+ spin_lock_irqsave(&adapter->scan_pending_q_lock,
+ scan_pending_q_flags);
+ list_for_each_entry_safe(cmd_node, tmp_node,
+ &adapter->scan_pending_q, list) {
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+ scan_pending_q_flags);
+ cmd_node->wait_q_enabled = false;
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ spin_lock_irqsave(&adapter->scan_pending_q_lock,
+ scan_pending_q_flags);
+ cancel_scan_cmd = true;
+ }
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+ scan_pending_q_flags);
+
+ if (cancel_scan_cmd) {
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
+ adapter->scan_processing = false;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
+ }
+ adapter->cmd_wait_q.status = -1;
+ mwifiex_complete_cmd(adapter);
+}
+
+/*
+ * This function sends the sleep confirm command to firmware, if
+ * possible.
+ *
+ * The sleep confirm command cannot be issued if command response,
+ * data response or event response is awaiting handling, or if we
+ * are in the middle of sending a command, or expecting a command
+ * response.
+ */
+void
+mwifiex_check_ps_cond(struct mwifiex_adapter *adapter)
+{
+ if (!adapter->cmd_sent &&
+ !adapter->curr_cmd && !IS_CARD_RX_RCVD(adapter))
+ mwifiex_dnld_sleep_confirm_cmd(adapter);
+ else
+ dev_dbg(adapter->dev,
+ "cmd: Delay Sleep Confirm (%s%s%s)\n",
+ (adapter->cmd_sent) ? "D" : "",
+ (adapter->curr_cmd) ? "C" : "",
+ (IS_CARD_RX_RCVD(adapter)) ? "R" : "");
+}
+
+/*
+ * This function sends a Host Sleep activated event to applications.
+ *
+ * This event is generated by the driver, with a blank event body.
+ */
+void
+mwifiex_hs_activated_event(struct mwifiex_private *priv, u8 activated)
+{
+ if (activated) {
+ if (priv->adapter->is_hs_configured) {
+ priv->adapter->hs_activated = true;
+ dev_dbg(priv->adapter->dev, "event: hs_activated\n");
+ priv->adapter->hs_activate_wait_q_woken = true;
+ wake_up_interruptible(
+ &priv->adapter->hs_activate_wait_q);
+ } else {
+ dev_dbg(priv->adapter->dev, "event: HS not configured\n");
+ }
+ } else {
+ dev_dbg(priv->adapter->dev, "event: hs_deactivated\n");
+ priv->adapter->hs_activated = false;
+ }
+}
+
+/*
+ * This function handles the command response of a Host Sleep configuration
+ * command.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and setting the current host sleep activation status in driver.
+ *
+ * In case host sleep status change, the function generates an event to
+ * notify the applications.
+ */
+int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11_hs_cfg_enh *phs_cfg =
+ &resp->params.opt_hs_cfg;
+ uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions);
+
+ if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE)) {
+ mwifiex_hs_activated_event(priv, true);
+ return 0;
+ } else {
+ dev_dbg(adapter->dev, "cmd: CMD_RESP: HS_CFG cmd reply"
+ " result=%#x, conditions=0x%x gpio=0x%x gap=0x%x\n",
+ resp->result, conditions,
+ phs_cfg->params.hs_config.gpio,
+ phs_cfg->params.hs_config.gap);
+ }
+ if (conditions != HOST_SLEEP_CFG_CANCEL) {
+ adapter->is_hs_configured = true;
+ } else {
+ adapter->is_hs_configured = false;
+ if (adapter->hs_activated)
+ mwifiex_hs_activated_event(priv, false);
+ }
+
+ return 0;
+}
+
+/*
+ * This function wakes up the adapter and generates a Host Sleep
+ * cancel event on receiving the power up interrupt.
+ */
+void
+mwifiex_process_hs_config(struct mwifiex_adapter *adapter)
+{
+ dev_dbg(adapter->dev, "info: %s: auto cancelling host sleep"
+ " since there is interrupt from the firmware\n", __func__);
+
+ adapter->if_ops.wakeup(adapter);
+ adapter->hs_activated = false;
+ adapter->is_hs_configured = false;
+ mwifiex_hs_activated_event(mwifiex_get_priv(adapter,
+ MWIFIEX_BSS_ROLE_ANY), false);
+}
+
+/*
+ * This function handles the command response of a sleep confirm command.
+ *
+ * The function sets the card state to SLEEP if the response indicates success.
+ */
+void
+mwifiex_process_sleep_confirm_resp(struct mwifiex_adapter *adapter,
+ u8 *pbuf, u32 upld_len)
+{
+ struct host_cmd_ds_command *cmd = (struct host_cmd_ds_command *) pbuf;
+ struct mwifiex_private *priv =
+ mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ uint16_t result = le16_to_cpu(cmd->result);
+ uint16_t command = le16_to_cpu(cmd->command);
+ uint16_t seq_num = le16_to_cpu(cmd->seq_num);
+
+ if (!upld_len) {
+ dev_err(adapter->dev, "%s: cmd size is 0\n", __func__);
+ return;
+ }
+
+ /* Get BSS number and corresponding priv */
+ priv = mwifiex_get_priv_by_id(adapter, HostCmd_GET_BSS_NO(seq_num),
+ HostCmd_GET_BSS_TYPE(seq_num));
+ if (!priv)
+ priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+
+ /* Update sequence number */
+ seq_num = HostCmd_GET_SEQ_NO(seq_num);
+ /* Clear RET_BIT from HostCmd */
+ command &= HostCmd_CMD_ID_MASK;
+
+ if (command != HostCmd_CMD_802_11_PS_MODE_ENH) {
+ dev_err(adapter->dev, "%s: received unexpected response for"
+ " cmd %x, result = %x\n", __func__, command, result);
+ return;
+ }
+
+ if (result) {
+ dev_err(adapter->dev, "%s: sleep confirm cmd failed\n",
+ __func__);
+ adapter->pm_wakeup_card_req = false;
+ adapter->ps_state = PS_STATE_AWAKE;
+ return;
+ }
+ adapter->pm_wakeup_card_req = true;
+ if (adapter->is_hs_configured)
+ mwifiex_hs_activated_event(mwifiex_get_priv(adapter,
+ MWIFIEX_BSS_ROLE_ANY), true);
+ adapter->ps_state = PS_STATE_SLEEP;
+ cmd->command = cpu_to_le16(command);
+ cmd->seq_num = cpu_to_le16(seq_num);
+}
+EXPORT_SYMBOL_GPL(mwifiex_process_sleep_confirm_resp);
+
+/*
+ * This function prepares an enhanced power mode command.
+ *
+ * This function can be used to disable power save or to configure
+ * power save with auto PS or STA PS or auto deep sleep.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting Power Save bitmap, PS parameters TLV, PS mode TLV,
+ * auto deep sleep TLV (as required)
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_enh_power_mode(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action, uint16_t ps_bitmap,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_ps_mode_enh *psmode_enh =
+ &cmd->params.psmode_enh;
+ u8 *tlv;
+ u16 cmd_size = 0;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH);
+ if (cmd_action == DIS_AUTO_PS) {
+ psmode_enh->action = cpu_to_le16(DIS_AUTO_PS);
+ psmode_enh->params.ps_bitmap = cpu_to_le16(ps_bitmap);
+ cmd->size = cpu_to_le16(S_DS_GEN + sizeof(psmode_enh->action) +
+ sizeof(psmode_enh->params.ps_bitmap));
+ } else if (cmd_action == GET_PS) {
+ psmode_enh->action = cpu_to_le16(GET_PS);
+ psmode_enh->params.ps_bitmap = cpu_to_le16(ps_bitmap);
+ cmd->size = cpu_to_le16(S_DS_GEN + sizeof(psmode_enh->action) +
+ sizeof(psmode_enh->params.ps_bitmap));
+ } else if (cmd_action == EN_AUTO_PS) {
+ psmode_enh->action = cpu_to_le16(EN_AUTO_PS);
+ psmode_enh->params.ps_bitmap = cpu_to_le16(ps_bitmap);
+ cmd_size = S_DS_GEN + sizeof(psmode_enh->action) +
+ sizeof(psmode_enh->params.ps_bitmap);
+ tlv = (u8 *) cmd + cmd_size;
+ if (ps_bitmap & BITMAP_STA_PS) {
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_ie_types_ps_param *ps_tlv =
+ (struct mwifiex_ie_types_ps_param *) tlv;
+ struct mwifiex_ps_param *ps_mode = &ps_tlv->param;
+ ps_tlv->header.type = cpu_to_le16(TLV_TYPE_PS_PARAM);
+ ps_tlv->header.len = cpu_to_le16(sizeof(*ps_tlv) -
+ sizeof(struct mwifiex_ie_types_header));
+ cmd_size += sizeof(*ps_tlv);
+ tlv += sizeof(*ps_tlv);
+ dev_dbg(adapter->dev, "cmd: PS Command: Enter PS\n");
+ ps_mode->null_pkt_interval =
+ cpu_to_le16(adapter->null_pkt_interval);
+ ps_mode->multiple_dtims =
+ cpu_to_le16(adapter->multiple_dtim);
+ ps_mode->bcn_miss_timeout =
+ cpu_to_le16(adapter->bcn_miss_time_out);
+ ps_mode->local_listen_interval =
+ cpu_to_le16(adapter->local_listen_interval);
+ ps_mode->adhoc_wake_period =
+ cpu_to_le16(adapter->adhoc_awake_period);
+ ps_mode->delay_to_ps =
+ cpu_to_le16(adapter->delay_to_ps);
+ ps_mode->mode =
+ cpu_to_le16(adapter->enhanced_ps_mode);
+
+ }
+ if (ps_bitmap & BITMAP_AUTO_DS) {
+ struct mwifiex_ie_types_auto_ds_param *auto_ds_tlv =
+ (struct mwifiex_ie_types_auto_ds_param *) tlv;
+ u16 idletime = 0;
+
+ auto_ds_tlv->header.type =
+ cpu_to_le16(TLV_TYPE_AUTO_DS_PARAM);
+ auto_ds_tlv->header.len =
+ cpu_to_le16(sizeof(*auto_ds_tlv) -
+ sizeof(struct mwifiex_ie_types_header));
+ cmd_size += sizeof(*auto_ds_tlv);
+ tlv += sizeof(*auto_ds_tlv);
+ if (data_buf)
+ idletime = ((struct mwifiex_ds_auto_ds *)
+ data_buf)->idle_time;
+ dev_dbg(priv->adapter->dev,
+ "cmd: PS Command: Enter Auto Deep Sleep\n");
+ auto_ds_tlv->deep_sleep_timeout = cpu_to_le16(idletime);
+ }
+ cmd->size = cpu_to_le16(cmd_size);
+ }
+ return 0;
+}
+
+/*
+ * This function handles the command response of an enhanced power mode
+ * command.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and setting the current enhanced power mode in driver.
+ */
+int mwifiex_ret_enh_power_mode(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11_ps_mode_enh *ps_mode =
+ &resp->params.psmode_enh;
+ uint16_t action = le16_to_cpu(ps_mode->action);
+ uint16_t ps_bitmap = le16_to_cpu(ps_mode->params.ps_bitmap);
+ uint16_t auto_ps_bitmap =
+ le16_to_cpu(ps_mode->params.ps_bitmap);
+
+ dev_dbg(adapter->dev, "info: %s: PS_MODE cmd reply result=%#x action=%#X\n",
+ __func__, resp->result, action);
+ if (action == EN_AUTO_PS) {
+ if (auto_ps_bitmap & BITMAP_AUTO_DS) {
+ dev_dbg(adapter->dev, "cmd: Enabled auto deep sleep\n");
+ priv->adapter->is_deep_sleep = true;
+ }
+ if (auto_ps_bitmap & BITMAP_STA_PS) {
+ dev_dbg(adapter->dev, "cmd: Enabled STA power save\n");
+ if (adapter->sleep_period.period)
+ dev_dbg(adapter->dev, "cmd: set to uapsd/pps mode\n");
+ }
+ } else if (action == DIS_AUTO_PS) {
+ if (ps_bitmap & BITMAP_AUTO_DS) {
+ priv->adapter->is_deep_sleep = false;
+ dev_dbg(adapter->dev, "cmd: Disabled auto deep sleep\n");
+ }
+ if (ps_bitmap & BITMAP_STA_PS) {
+ dev_dbg(adapter->dev, "cmd: Disabled STA power save\n");
+ if (adapter->sleep_period.period) {
+ adapter->delay_null_pkt = false;
+ adapter->tx_lock_flag = false;
+ adapter->pps_uapsd_mode = false;
+ }
+ }
+ } else if (action == GET_PS) {
+ if (ps_bitmap & BITMAP_STA_PS)
+ adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
+ else
+ adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
+
+ dev_dbg(adapter->dev, "cmd: ps_bitmap=%#x\n", ps_bitmap);
+
+ if (data_buf) {
+ /* This section is for get power save mode */
+ struct mwifiex_ds_pm_cfg *pm_cfg =
+ (struct mwifiex_ds_pm_cfg *)data_buf;
+ if (ps_bitmap & BITMAP_STA_PS)
+ pm_cfg->param.ps_mode = 1;
+ else
+ pm_cfg->param.ps_mode = 0;
+ }
+ }
+ return 0;
+}
+
+/*
+ * This function prepares command to get hardware specifications.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting permanent address parameter
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_get_hw_spec(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd)
+{
+ struct host_cmd_ds_get_hw_spec *hw_spec = &cmd->params.hw_spec;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_GET_HW_SPEC);
+ cmd->size =
+ cpu_to_le16(sizeof(struct host_cmd_ds_get_hw_spec) + S_DS_GEN);
+ memcpy(hw_spec->permanent_addr, priv->curr_addr, ETH_ALEN);
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of get hardware
+ * specifications.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving/updating the following parameters in driver -
+ * - Firmware capability information
+ * - Firmware band settings
+ * - Ad-hoc start band and channel
+ * - Ad-hoc 11n activation status
+ * - Firmware release number
+ * - Number of antennas
+ * - Hardware address
+ * - Hardware interface version
+ * - Firmware version
+ * - Region code
+ * - 11n capabilities
+ * - MCS support fields
+ * - MP end port
+ */
+int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct host_cmd_ds_get_hw_spec *hw_spec = &resp->params.hw_spec;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int i;
+
+ adapter->fw_cap_info = le32_to_cpu(hw_spec->fw_cap_info);
+
+ if (IS_SUPPORT_MULTI_BANDS(adapter))
+ adapter->fw_bands = (u8) GET_FW_DEFAULT_BANDS(adapter);
+ else
+ adapter->fw_bands = BAND_B;
+
+ adapter->config_bands = adapter->fw_bands;
+
+ if (adapter->fw_bands & BAND_A) {
+ if (adapter->fw_bands & BAND_GN) {
+ adapter->config_bands |= BAND_AN;
+ adapter->fw_bands |= BAND_AN;
+ }
+ if (adapter->fw_bands & BAND_AN) {
+ adapter->adhoc_start_band = BAND_A | BAND_AN;
+ adapter->adhoc_11n_enabled = true;
+ } else {
+ adapter->adhoc_start_band = BAND_A;
+ }
+ priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL_A;
+ } else if (adapter->fw_bands & BAND_GN) {
+ adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN;
+ priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
+ adapter->adhoc_11n_enabled = true;
+ } else if (adapter->fw_bands & BAND_G) {
+ adapter->adhoc_start_band = BAND_G | BAND_B;
+ priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
+ } else if (adapter->fw_bands & BAND_B) {
+ adapter->adhoc_start_band = BAND_B;
+ priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
+ }
+
+ adapter->fw_release_number = le32_to_cpu(hw_spec->fw_release_number);
+ adapter->number_of_antenna = le16_to_cpu(hw_spec->number_of_antenna);
+
+ dev_dbg(adapter->dev, "info: GET_HW_SPEC: fw_release_number- %#x\n",
+ adapter->fw_release_number);
+ dev_dbg(adapter->dev, "info: GET_HW_SPEC: permanent addr: %pM\n",
+ hw_spec->permanent_addr);
+ dev_dbg(adapter->dev, "info: GET_HW_SPEC: hw_if_version=%#x version=%#x\n",
+ le16_to_cpu(hw_spec->hw_if_version),
+ le16_to_cpu(hw_spec->version));
+
+ if (priv->curr_addr[0] == 0xff)
+ memmove(priv->curr_addr, hw_spec->permanent_addr, ETH_ALEN);
+
+ adapter->region_code = le16_to_cpu(hw_spec->region_code);
+
+ for (i = 0; i < MWIFIEX_MAX_REGION_CODE; i++)
+ /* Use the region code to search for the index */
+ if (adapter->region_code == region_code_index[i])
+ break;
+
+ /* If it's unidentified region code, use the default (USA) */
+ if (i >= MWIFIEX_MAX_REGION_CODE) {
+ adapter->region_code = 0x10;
+ dev_dbg(adapter->dev, "cmd: unknown region code, use default (USA)\n");
+ }
+
+ adapter->hw_dot_11n_dev_cap = le32_to_cpu(hw_spec->dot_11n_dev_cap);
+ adapter->hw_dev_mcs_support = hw_spec->dev_mcs_support;
+
+ if (adapter->if_ops.update_mp_end_port)
+ adapter->if_ops.update_mp_end_port(adapter,
+ le16_to_cpu(hw_spec->mp_end_port));
+
+ return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
new file mode 100644
index 0000000..46d65e0
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -0,0 +1,770 @@
+/*
+ * Marvell Wireless LAN device driver: debugfs
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/debugfs.h>
+
+#include "main.h"
+#include "11n.h"
+
+
+static struct dentry *mwifiex_dfs_dir;
+
+static char *bss_modes[] = {
+ "Unknown",
+ "Managed",
+ "Ad-hoc",
+ "Auto"
+};
+
+/* size/addr for mwifiex_debug_info */
+#define item_size(n) (FIELD_SIZEOF(struct mwifiex_debug_info, n))
+#define item_addr(n) (offsetof(struct mwifiex_debug_info, n))
+
+/* size/addr for struct mwifiex_adapter */
+#define adapter_item_size(n) (FIELD_SIZEOF(struct mwifiex_adapter, n))
+#define adapter_item_addr(n) (offsetof(struct mwifiex_adapter, n))
+
+struct mwifiex_debug_data {
+ char name[32]; /* variable/array name */
+ u32 size; /* size of the variable/array */
+ size_t addr; /* address of the variable/array */
+ int num; /* number of variables in an array */
+};
+
+static struct mwifiex_debug_data items[] = {
+ {"int_counter", item_size(int_counter),
+ item_addr(int_counter), 1},
+ {"wmm_ac_vo", item_size(packets_out[WMM_AC_VO]),
+ item_addr(packets_out[WMM_AC_VO]), 1},
+ {"wmm_ac_vi", item_size(packets_out[WMM_AC_VI]),
+ item_addr(packets_out[WMM_AC_VI]), 1},
+ {"wmm_ac_be", item_size(packets_out[WMM_AC_BE]),
+ item_addr(packets_out[WMM_AC_BE]), 1},
+ {"wmm_ac_bk", item_size(packets_out[WMM_AC_BK]),
+ item_addr(packets_out[WMM_AC_BK]), 1},
+ {"max_tx_buf_size", item_size(max_tx_buf_size),
+ item_addr(max_tx_buf_size), 1},
+ {"tx_buf_size", item_size(tx_buf_size),
+ item_addr(tx_buf_size), 1},
+ {"curr_tx_buf_size", item_size(curr_tx_buf_size),
+ item_addr(curr_tx_buf_size), 1},
+ {"ps_mode", item_size(ps_mode),
+ item_addr(ps_mode), 1},
+ {"ps_state", item_size(ps_state),
+ item_addr(ps_state), 1},
+ {"is_deep_sleep", item_size(is_deep_sleep),
+ item_addr(is_deep_sleep), 1},
+ {"wakeup_dev_req", item_size(pm_wakeup_card_req),
+ item_addr(pm_wakeup_card_req), 1},
+ {"wakeup_tries", item_size(pm_wakeup_fw_try),
+ item_addr(pm_wakeup_fw_try), 1},
+ {"hs_configured", item_size(is_hs_configured),
+ item_addr(is_hs_configured), 1},
+ {"hs_activated", item_size(hs_activated),
+ item_addr(hs_activated), 1},
+ {"num_tx_timeout", item_size(num_tx_timeout),
+ item_addr(num_tx_timeout), 1},
+ {"num_cmd_timeout", item_size(num_cmd_timeout),
+ item_addr(num_cmd_timeout), 1},
+ {"timeout_cmd_id", item_size(timeout_cmd_id),
+ item_addr(timeout_cmd_id), 1},
+ {"timeout_cmd_act", item_size(timeout_cmd_act),
+ item_addr(timeout_cmd_act), 1},
+ {"last_cmd_id", item_size(last_cmd_id),
+ item_addr(last_cmd_id), DBG_CMD_NUM},
+ {"last_cmd_act", item_size(last_cmd_act),
+ item_addr(last_cmd_act), DBG_CMD_NUM},
+ {"last_cmd_index", item_size(last_cmd_index),
+ item_addr(last_cmd_index), 1},
+ {"last_cmd_resp_id", item_size(last_cmd_resp_id),
+ item_addr(last_cmd_resp_id), DBG_CMD_NUM},
+ {"last_cmd_resp_index", item_size(last_cmd_resp_index),
+ item_addr(last_cmd_resp_index), 1},
+ {"last_event", item_size(last_event),
+ item_addr(last_event), DBG_CMD_NUM},
+ {"last_event_index", item_size(last_event_index),
+ item_addr(last_event_index), 1},
+ {"num_cmd_h2c_fail", item_size(num_cmd_host_to_card_failure),
+ item_addr(num_cmd_host_to_card_failure), 1},
+ {"num_cmd_sleep_cfm_fail",
+ item_size(num_cmd_sleep_cfm_host_to_card_failure),
+ item_addr(num_cmd_sleep_cfm_host_to_card_failure), 1},
+ {"num_tx_h2c_fail", item_size(num_tx_host_to_card_failure),
+ item_addr(num_tx_host_to_card_failure), 1},
+ {"num_evt_deauth", item_size(num_event_deauth),
+ item_addr(num_event_deauth), 1},
+ {"num_evt_disassoc", item_size(num_event_disassoc),
+ item_addr(num_event_disassoc), 1},
+ {"num_evt_link_lost", item_size(num_event_link_lost),
+ item_addr(num_event_link_lost), 1},
+ {"num_cmd_deauth", item_size(num_cmd_deauth),
+ item_addr(num_cmd_deauth), 1},
+ {"num_cmd_assoc_ok", item_size(num_cmd_assoc_success),
+ item_addr(num_cmd_assoc_success), 1},
+ {"num_cmd_assoc_fail", item_size(num_cmd_assoc_failure),
+ item_addr(num_cmd_assoc_failure), 1},
+ {"cmd_sent", item_size(cmd_sent),
+ item_addr(cmd_sent), 1},
+ {"data_sent", item_size(data_sent),
+ item_addr(data_sent), 1},
+ {"cmd_resp_received", item_size(cmd_resp_received),
+ item_addr(cmd_resp_received), 1},
+ {"event_received", item_size(event_received),
+ item_addr(event_received), 1},
+
+ /* variables defined in struct mwifiex_adapter */
+ {"cmd_pending", adapter_item_size(cmd_pending),
+ adapter_item_addr(cmd_pending), 1},
+ {"tx_pending", adapter_item_size(tx_pending),
+ adapter_item_addr(tx_pending), 1},
+ {"rx_pending", adapter_item_size(rx_pending),
+ adapter_item_addr(rx_pending), 1},
+};
+
+static int num_of_items = ARRAY_SIZE(items);
+
+/*
+ * Generic proc file open handler.
+ *
+ * This function is called every time a file is accessed for read or write.
+ */
+static int
+mwifiex_open_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+/*
+ * Proc info file read handler.
+ *
+ * This function is called when the 'info' file is opened for reading.
+ * It prints the following driver related information -
+ * - Driver name
+ * - Driver version
+ * - Driver extended version
+ * - Interface name
+ * - BSS mode
+ * - Media state (connected or disconnected)
+ * - MAC address
+ * - Total number of Tx bytes
+ * - Total number of Rx bytes
+ * - Total number of Tx packets
+ * - Total number of Rx packets
+ * - Total number of dropped Tx packets
+ * - Total number of dropped Rx packets
+ * - Total number of corrupted Tx packets
+ * - Total number of corrupted Rx packets
+ * - Carrier status (on or off)
+ * - Tx queue status (started or stopped)
+ *
+ * For STA mode drivers, it also prints the following extra -
+ * - ESSID
+ * - BSSID
+ * - Channel
+ * - Region code
+ * - Multicast count
+ * - Multicast addresses
+ */
+static ssize_t
+mwifiex_info_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv =
+ (struct mwifiex_private *) file->private_data;
+ struct net_device *netdev = priv->netdev;
+ struct netdev_hw_addr *ha;
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
+ char *p = (char *) page, fmt[64];
+ struct mwifiex_bss_info info;
+ ssize_t ret;
+ int i = 0;
+
+ if (!p)
+ return -ENOMEM;
+
+ memset(&info, 0, sizeof(info));
+ ret = mwifiex_get_bss_info(priv, &info);
+ if (ret)
+ goto free_and_exit;
+
+ mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1);
+
+ if (!priv->version_str[0])
+ mwifiex_get_ver_ext(priv);
+
+ p += sprintf(p, "driver_name = " "\"mwifiex\"\n");
+ p += sprintf(p, "driver_version = %s", fmt);
+ p += sprintf(p, "\nverext = %s", priv->version_str);
+ p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name);
+ p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
+ p += sprintf(p, "media_state=\"%s\"\n",
+ (!priv->media_connected ? "Disconnected" : "Connected"));
+ p += sprintf(p, "mac_address=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n",
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+
+ if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) {
+ p += sprintf(p, "multicast_count=\"%d\"\n",
+ netdev_mc_count(netdev));
+ p += sprintf(p, "essid=\"%s\"\n", info.ssid.ssid);
+ p += sprintf(p, "bssid=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n",
+ info.bssid[0], info.bssid[1],
+ info.bssid[2], info.bssid[3],
+ info.bssid[4], info.bssid[5]);
+ p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan);
+ p += sprintf(p, "region_code = \"%02x\"\n", info.region_code);
+
+ netdev_for_each_mc_addr(ha, netdev)
+ p += sprintf(p, "multicast_address[%d]="
+ "\"%02x:%02x:%02x:%02x:%02x:%02x\"\n", i++,
+ ha->addr[0], ha->addr[1],
+ ha->addr[2], ha->addr[3],
+ ha->addr[4], ha->addr[5]);
+ }
+
+ p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes);
+ p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes);
+ p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets);
+ p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets);
+ p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped);
+ p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped);
+ p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors);
+ p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors);
+ p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev))
+ ? "on" : "off"));
+ p += sprintf(p, "tx queue %s\n", ((netif_queue_stopped(priv->netdev))
+ ? "stopped" : "started"));
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
+ (unsigned long) p - page);
+
+free_and_exit:
+ free_page(page);
+ return ret;
+}
+
+/*
+ * Proc getlog file read handler.
+ *
+ * This function is called when the 'getlog' file is opened for reading
+ * It prints the following log information -
+ * - Number of multicast Tx frames
+ * - Number of failed packets
+ * - Number of Tx retries
+ * - Number of multicast Tx retries
+ * - Number of duplicate frames
+ * - Number of RTS successes
+ * - Number of RTS failures
+ * - Number of ACK failures
+ * - Number of fragmented Rx frames
+ * - Number of multicast Rx frames
+ * - Number of FCS errors
+ * - Number of Tx frames
+ * - WEP ICV error counts
+ */
+static ssize_t
+mwifiex_getlog_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv =
+ (struct mwifiex_private *) file->private_data;
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
+ char *p = (char *) page;
+ ssize_t ret;
+ struct mwifiex_ds_get_stats stats;
+
+ if (!p)
+ return -ENOMEM;
+
+ memset(&stats, 0, sizeof(stats));
+ ret = mwifiex_get_stats_info(priv, &stats);
+ if (ret)
+ goto free_and_exit;
+
+ p += sprintf(p, "\n"
+ "mcasttxframe %u\n"
+ "failed %u\n"
+ "retry %u\n"
+ "multiretry %u\n"
+ "framedup %u\n"
+ "rtssuccess %u\n"
+ "rtsfailure %u\n"
+ "ackfailure %u\n"
+ "rxfrag %u\n"
+ "mcastrxframe %u\n"
+ "fcserror %u\n"
+ "txframe %u\n"
+ "wepicverrcnt-1 %u\n"
+ "wepicverrcnt-2 %u\n"
+ "wepicverrcnt-3 %u\n"
+ "wepicverrcnt-4 %u\n",
+ stats.mcast_tx_frame,
+ stats.failed,
+ stats.retry,
+ stats.multi_retry,
+ stats.frame_dup,
+ stats.rts_success,
+ stats.rts_failure,
+ stats.ack_failure,
+ stats.rx_frag,
+ stats.mcast_rx_frame,
+ stats.fcs_error,
+ stats.tx_frame,
+ stats.wep_icv_error[0],
+ stats.wep_icv_error[1],
+ stats.wep_icv_error[2],
+ stats.wep_icv_error[3]);
+
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
+ (unsigned long) p - page);
+
+free_and_exit:
+ free_page(page);
+ return ret;
+}
+
+static struct mwifiex_debug_info info;
+
+/*
+ * Proc debug file read handler.
+ *
+ * This function is called when the 'debug' file is opened for reading
+ * It prints the following log information -
+ * - Interrupt count
+ * - WMM AC VO packets count
+ * - WMM AC VI packets count
+ * - WMM AC BE packets count
+ * - WMM AC BK packets count
+ * - Maximum Tx buffer size
+ * - Tx buffer size
+ * - Current Tx buffer size
+ * - Power Save mode
+ * - Power Save state
+ * - Deep Sleep status
+ * - Device wakeup required status
+ * - Number of wakeup tries
+ * - Host Sleep configured status
+ * - Host Sleep activated status
+ * - Number of Tx timeouts
+ * - Number of command timeouts
+ * - Last timed out command ID
+ * - Last timed out command action
+ * - Last command ID
+ * - Last command action
+ * - Last command index
+ * - Last command response ID
+ * - Last command response index
+ * - Last event
+ * - Last event index
+ * - Number of host to card command failures
+ * - Number of sleep confirm command failures
+ * - Number of host to card data failure
+ * - Number of deauthentication events
+ * - Number of disassociation events
+ * - Number of link lost events
+ * - Number of deauthentication commands
+ * - Number of association success commands
+ * - Number of association failure commands
+ * - Number of commands sent
+ * - Number of data packets sent
+ * - Number of command responses received
+ * - Number of events received
+ * - Tx BA stream table (TID, RA)
+ * - Rx reorder table (TID, TA, Start window, Window size, Buffer)
+ */
+static ssize_t
+mwifiex_debug_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv =
+ (struct mwifiex_private *) file->private_data;
+ struct mwifiex_debug_data *d = &items[0];
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
+ char *p = (char *) page;
+ ssize_t ret;
+ size_t size, addr;
+ long val;
+ int i, j;
+
+ if (!p)
+ return -ENOMEM;
+
+ ret = mwifiex_get_debug_info(priv, &info);
+ if (ret)
+ goto free_and_exit;
+
+ for (i = 0; i < num_of_items; i++) {
+ p += sprintf(p, "%s=", d[i].name);
+
+ size = d[i].size / d[i].num;
+
+ if (i < (num_of_items - 3))
+ addr = d[i].addr + (size_t) &info;
+ else /* The last 3 items are struct mwifiex_adapter variables */
+ addr = d[i].addr + (size_t) priv->adapter;
+
+ for (j = 0; j < d[i].num; j++) {
+ switch (size) {
+ case 1:
+ val = *((u8 *) addr);
+ break;
+ case 2:
+ val = *((u16 *) addr);
+ break;
+ case 4:
+ val = *((u32 *) addr);
+ break;
+ case 8:
+ val = *((long long *) addr);
+ break;
+ default:
+ val = -1;
+ break;
+ }
+
+ p += sprintf(p, "%#lx ", val);
+ addr += size;
+ }
+
+ p += sprintf(p, "\n");
+ }
+
+ if (info.tx_tbl_num) {
+ p += sprintf(p, "Tx BA stream table:\n");
+ for (i = 0; i < info.tx_tbl_num; i++)
+ p += sprintf(p, "tid = %d, "
+ "ra = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ info.tx_tbl[i].tid, info.tx_tbl[i].ra[0],
+ info.tx_tbl[i].ra[1], info.tx_tbl[i].ra[2],
+ info.tx_tbl[i].ra[3], info.tx_tbl[i].ra[4],
+ info.tx_tbl[i].ra[5]);
+ }
+
+ if (info.rx_tbl_num) {
+ p += sprintf(p, "Rx reorder table:\n");
+ for (i = 0; i < info.rx_tbl_num; i++) {
+
+ p += sprintf(p, "tid = %d, "
+ "ta = %02x:%02x:%02x:%02x:%02x:%02x, "
+ "start_win = %d, "
+ "win_size = %d, buffer: ",
+ info.rx_tbl[i].tid,
+ info.rx_tbl[i].ta[0], info.rx_tbl[i].ta[1],
+ info.rx_tbl[i].ta[2], info.rx_tbl[i].ta[3],
+ info.rx_tbl[i].ta[4], info.rx_tbl[i].ta[5],
+ info.rx_tbl[i].start_win,
+ info.rx_tbl[i].win_size);
+
+ for (j = 0; j < info.rx_tbl[i].win_size; j++)
+ p += sprintf(p, "%c ",
+ info.rx_tbl[i].buffer[j] ?
+ '1' : '0');
+
+ p += sprintf(p, "\n");
+ }
+ }
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page,
+ (unsigned long) p - page);
+
+free_and_exit:
+ free_page(page);
+ return ret;
+}
+
+static u32 saved_reg_type, saved_reg_offset, saved_reg_value;
+
+/*
+ * Proc regrdwr file write handler.
+ *
+ * This function is called when the 'regrdwr' file is opened for writing
+ *
+ * This function can be used to write to a register.
+ */
+static ssize_t
+mwifiex_regrdwr_write(struct file *file,
+ const char __user *ubuf, size_t count, loff_t *ppos)
+{
+ unsigned long addr = get_zeroed_page(GFP_KERNEL);
+ char *buf = (char *) addr;
+ size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1));
+ int ret;
+ u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX;
+
+ if (!buf)
+ return -ENOMEM;
+
+
+ if (copy_from_user(buf, ubuf, buf_size)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ sscanf(buf, "%u %x %x", ®_type, ®_offset, ®_value);
+
+ if (reg_type == 0 || reg_offset == 0) {
+ ret = -EINVAL;
+ goto done;
+ } else {
+ saved_reg_type = reg_type;
+ saved_reg_offset = reg_offset;
+ saved_reg_value = reg_value;
+ ret = count;
+ }
+done:
+ free_page(addr);
+ return ret;
+}
+
+/*
+ * Proc regrdwr file read handler.
+ *
+ * This function is called when the 'regrdwr' file is opened for reading
+ *
+ * This function can be used to read from a register.
+ */
+static ssize_t
+mwifiex_regrdwr_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv =
+ (struct mwifiex_private *) file->private_data;
+ unsigned long addr = get_zeroed_page(GFP_KERNEL);
+ char *buf = (char *) addr;
+ int pos = 0, ret = 0;
+ u32 reg_value;
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (!saved_reg_type) {
+ /* No command has been given */
+ pos += snprintf(buf, PAGE_SIZE, "0");
+ goto done;
+ }
+ /* Set command has been given */
+ if (saved_reg_value != UINT_MAX) {
+ ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset,
+ saved_reg_value);
+
+ pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n",
+ saved_reg_type, saved_reg_offset,
+ saved_reg_value);
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
+
+ goto done;
+ }
+ /* Get command has been given */
+ ret = mwifiex_reg_read(priv, saved_reg_type,
+ saved_reg_offset, ®_value);
+ if (ret) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type,
+ saved_reg_offset, reg_value);
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
+
+done:
+ free_page(addr);
+ return ret;
+}
+
+static u32 saved_offset = -1, saved_bytes = -1;
+
+/*
+ * Proc rdeeprom file write handler.
+ *
+ * This function is called when the 'rdeeprom' file is opened for writing
+ *
+ * This function can be used to write to a RDEEPROM location.
+ */
+static ssize_t
+mwifiex_rdeeprom_write(struct file *file,
+ const char __user *ubuf, size_t count, loff_t *ppos)
+{
+ unsigned long addr = get_zeroed_page(GFP_KERNEL);
+ char *buf = (char *) addr;
+ size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1));
+ int ret = 0;
+ int offset = -1, bytes = -1;
+
+ if (!buf)
+ return -ENOMEM;
+
+
+ if (copy_from_user(buf, ubuf, buf_size)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ sscanf(buf, "%d %d", &offset, &bytes);
+
+ if (offset == -1 || bytes == -1) {
+ ret = -EINVAL;
+ goto done;
+ } else {
+ saved_offset = offset;
+ saved_bytes = bytes;
+ ret = count;
+ }
+done:
+ free_page(addr);
+ return ret;
+}
+
+/*
+ * Proc rdeeprom read write handler.
+ *
+ * This function is called when the 'rdeeprom' file is opened for reading
+ *
+ * This function can be used to read from a RDEEPROM location.
+ */
+static ssize_t
+mwifiex_rdeeprom_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv =
+ (struct mwifiex_private *) file->private_data;
+ unsigned long addr = get_zeroed_page(GFP_KERNEL);
+ char *buf = (char *) addr;
+ int pos = 0, ret = 0, i;
+ u8 value[MAX_EEPROM_DATA];
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (saved_offset == -1) {
+ /* No command has been given */
+ pos += snprintf(buf, PAGE_SIZE, "0");
+ goto done;
+ }
+
+ /* Get command has been given */
+ ret = mwifiex_eeprom_read(priv, (u16) saved_offset,
+ (u16) saved_bytes, value);
+ if (ret) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ pos += snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes);
+
+ for (i = 0; i < saved_bytes; i++)
+ pos += snprintf(buf + strlen(buf), PAGE_SIZE, "%d ", value[i]);
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
+
+done:
+ free_page(addr);
+ return ret;
+}
+
+
+#define MWIFIEX_DFS_ADD_FILE(name) do { \
+ if (!debugfs_create_file(#name, 0644, priv->dfs_dev_dir, \
+ priv, &mwifiex_dfs_##name##_fops)) \
+ return; \
+} while (0);
+
+#define MWIFIEX_DFS_FILE_OPS(name) \
+static const struct file_operations mwifiex_dfs_##name##_fops = { \
+ .read = mwifiex_##name##_read, \
+ .write = mwifiex_##name##_write, \
+ .open = mwifiex_open_generic, \
+};
+
+#define MWIFIEX_DFS_FILE_READ_OPS(name) \
+static const struct file_operations mwifiex_dfs_##name##_fops = { \
+ .read = mwifiex_##name##_read, \
+ .open = mwifiex_open_generic, \
+};
+
+#define MWIFIEX_DFS_FILE_WRITE_OPS(name) \
+static const struct file_operations mwifiex_dfs_##name##_fops = { \
+ .write = mwifiex_##name##_write, \
+ .open = mwifiex_open_generic, \
+};
+
+
+MWIFIEX_DFS_FILE_READ_OPS(info);
+MWIFIEX_DFS_FILE_READ_OPS(debug);
+MWIFIEX_DFS_FILE_READ_OPS(getlog);
+MWIFIEX_DFS_FILE_OPS(regrdwr);
+MWIFIEX_DFS_FILE_OPS(rdeeprom);
+
+/*
+ * This function creates the debug FS directory structure and the files.
+ */
+void
+mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
+{
+ if (!mwifiex_dfs_dir || !priv)
+ return;
+
+ priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
+ mwifiex_dfs_dir);
+
+ if (!priv->dfs_dev_dir)
+ return;
+
+ MWIFIEX_DFS_ADD_FILE(info);
+ MWIFIEX_DFS_ADD_FILE(debug);
+ MWIFIEX_DFS_ADD_FILE(getlog);
+ MWIFIEX_DFS_ADD_FILE(regrdwr);
+ MWIFIEX_DFS_ADD_FILE(rdeeprom);
+}
+
+/*
+ * This function removes the debug FS directory structure and the files.
+ */
+void
+mwifiex_dev_debugfs_remove(struct mwifiex_private *priv)
+{
+ if (!priv)
+ return;
+
+ debugfs_remove_recursive(priv->dfs_dev_dir);
+}
+
+/*
+ * This function creates the top level proc directory.
+ */
+void
+mwifiex_debugfs_init(void)
+{
+ if (!mwifiex_dfs_dir)
+ mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL);
+}
+
+/*
+ * This function removes the top level proc directory.
+ */
+void
+mwifiex_debugfs_remove(void)
+{
+ if (mwifiex_dfs_dir)
+ debugfs_remove(mwifiex_dfs_dir);
+}
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
new file mode 100644
index 0000000..0e90b09
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -0,0 +1,129 @@
+/*
+ * Marvell Wireless LAN device driver: generic data structures and APIs
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_DECL_H_
+#define _MWIFIEX_DECL_H_
+
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/wait.h>
+#include <linux/timer.h>
+#include <linux/ieee80211.h>
+
+
+#define MWIFIEX_MAX_BSS_NUM (1)
+
+#define MWIFIEX_MIN_DATA_HEADER_LEN 32 /* (sizeof(mwifiex_txpd)) */
+
+#define MWIFIEX_MAX_TX_BASTREAM_SUPPORTED 2
+#define MWIFIEX_MAX_RX_BASTREAM_SUPPORTED 16
+
+#define MWIFIEX_AMPDU_DEF_TXWINSIZE 32
+#define MWIFIEX_AMPDU_DEF_RXWINSIZE 16
+#define MWIFIEX_DEFAULT_BLOCK_ACK_TIMEOUT 0xffff
+
+#define MWIFIEX_RATE_INDEX_HRDSSS0 0
+#define MWIFIEX_RATE_INDEX_HRDSSS3 3
+#define MWIFIEX_RATE_INDEX_OFDM0 4
+#define MWIFIEX_RATE_INDEX_OFDM7 11
+#define MWIFIEX_RATE_INDEX_MCS0 12
+
+#define MWIFIEX_RATE_BITMAP_OFDM0 16
+#define MWIFIEX_RATE_BITMAP_OFDM7 23
+#define MWIFIEX_RATE_BITMAP_MCS0 32
+#define MWIFIEX_RATE_BITMAP_MCS127 159
+
+#define MWIFIEX_RX_DATA_BUF_SIZE (4 * 1024)
+
+#define MWIFIEX_RTS_MIN_VALUE (0)
+#define MWIFIEX_RTS_MAX_VALUE (2347)
+#define MWIFIEX_FRAG_MIN_VALUE (256)
+#define MWIFIEX_FRAG_MAX_VALUE (2346)
+
+#define MWIFIEX_SDIO_BLOCK_SIZE 256
+
+#define MWIFIEX_BUF_FLAG_REQUEUED_PKT BIT(0)
+
+enum mwifiex_bss_type {
+ MWIFIEX_BSS_TYPE_STA = 0,
+ MWIFIEX_BSS_TYPE_UAP = 1,
+ MWIFIEX_BSS_TYPE_ANY = 0xff,
+};
+
+enum mwifiex_bss_role {
+ MWIFIEX_BSS_ROLE_STA = 0,
+ MWIFIEX_BSS_ROLE_UAP = 1,
+ MWIFIEX_BSS_ROLE_ANY = 0xff,
+};
+
+#define BSS_ROLE_BIT_MASK BIT(0)
+
+#define GET_BSS_ROLE(priv) ((priv)->bss_role & BSS_ROLE_BIT_MASK)
+
+enum mwifiex_data_frame_type {
+ MWIFIEX_DATA_FRAME_TYPE_ETH_II = 0,
+ MWIFIEX_DATA_FRAME_TYPE_802_11,
+};
+
+struct mwifiex_fw_image {
+ u8 *helper_buf;
+ u32 helper_len;
+ u8 *fw_buf;
+ u32 fw_len;
+};
+
+struct mwifiex_802_11_ssid {
+ u32 ssid_len;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+};
+
+struct mwifiex_wait_queue {
+ wait_queue_head_t wait;
+ u16 condition;
+ int status;
+};
+
+struct mwifiex_rxinfo {
+ u8 bss_index;
+ struct sk_buff *parent;
+ u8 use_count;
+};
+
+struct mwifiex_txinfo {
+ u32 status_code;
+ u8 flags;
+ u8 bss_index;
+};
+
+struct mwifiex_bss_attr {
+ u8 bss_type;
+ u8 frame_type;
+ u8 active;
+ u8 bss_priority;
+ u8 bss_num;
+};
+
+enum mwifiex_wmm_ac_e {
+ WMM_AC_BK,
+ WMM_AC_BE,
+ WMM_AC_VI,
+ WMM_AC_VO
+} __packed;
+#endif /* !_MWIFIEX_DECL_H_ */
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
new file mode 100644
index 0000000..afdd145
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -0,0 +1,1187 @@
+/*
+ * Marvell Wireless LAN device driver: Firmware specific macros & structures
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_FW_H_
+#define _MWIFIEX_FW_H_
+
+#include <linux/if_ether.h>
+
+
+#define INTF_HEADER_LEN 4
+
+struct rfc_1042_hdr {
+ u8 llc_dsap;
+ u8 llc_ssap;
+ u8 llc_ctrl;
+ u8 snap_oui[3];
+ u16 snap_type;
+};
+
+struct rx_packet_hdr {
+ struct ethhdr eth803_hdr;
+ struct rfc_1042_hdr rfc1042_hdr;
+};
+
+struct tx_packet_hdr {
+ struct ethhdr eth803_hdr;
+ struct rfc_1042_hdr rfc1042_hdr;
+};
+
+#define B_SUPPORTED_RATES 5
+#define G_SUPPORTED_RATES 9
+#define BG_SUPPORTED_RATES 13
+#define A_SUPPORTED_RATES 9
+#define HOSTCMD_SUPPORTED_RATES 14
+#define N_SUPPORTED_RATES 3
+#define ALL_802_11_BANDS (BAND_A | BAND_B | BAND_G | BAND_GN)
+
+#define FW_MULTI_BANDS_SUPPORT (BIT(8) | BIT(9) | BIT(10) | BIT(11))
+#define IS_SUPPORT_MULTI_BANDS(adapter) \
+ (adapter->fw_cap_info & FW_MULTI_BANDS_SUPPORT)
+#define GET_FW_DEFAULT_BANDS(adapter) \
+ ((adapter->fw_cap_info >> 8) & ALL_802_11_BANDS)
+
+extern u8 supported_rates_b[B_SUPPORTED_RATES];
+extern u8 supported_rates_g[G_SUPPORTED_RATES];
+extern u8 supported_rates_bg[BG_SUPPORTED_RATES];
+extern u8 supported_rates_a[A_SUPPORTED_RATES];
+extern u8 supported_rates_n[N_SUPPORTED_RATES];
+
+#define HostCmd_WEP_KEY_INDEX_MASK 0x3fff
+
+#define KEY_INFO_ENABLED 0x01
+enum KEY_TYPE_ID {
+ KEY_TYPE_ID_WEP = 0,
+ KEY_TYPE_ID_TKIP,
+ KEY_TYPE_ID_AES,
+ KEY_TYPE_ID_WAPI,
+};
+#define KEY_MCAST BIT(0)
+#define KEY_UNICAST BIT(1)
+#define KEY_ENABLED BIT(2)
+
+#define WAPI_KEY_LEN 50
+
+#define MAX_POLL_TRIES 100
+
+#define MAX_MULTI_INTERFACE_POLL_TRIES 1000
+
+#define MAX_FIRMWARE_POLL_TRIES 100
+
+#define FIRMWARE_READY 0xfedc
+
+enum MWIFIEX_802_11_PRIVACY_FILTER {
+ MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL,
+ MWIFIEX_802_11_PRIV_FILTER_8021X_WEP
+};
+
+enum MWIFIEX_802_11_WEP_STATUS {
+ MWIFIEX_802_11_WEP_ENABLED,
+ MWIFIEX_802_11_WEP_DISABLED,
+};
+
+#define CAL_SNR(RSSI, NF) ((s16)((s16)(RSSI)-(s16)(NF)))
+
+#define PROPRIETARY_TLV_BASE_ID 0x0100
+#define TLV_TYPE_KEY_MATERIAL (PROPRIETARY_TLV_BASE_ID + 0)
+#define TLV_TYPE_CHANLIST (PROPRIETARY_TLV_BASE_ID + 1)
+#define TLV_TYPE_NUMPROBES (PROPRIETARY_TLV_BASE_ID + 2)
+#define TLV_TYPE_PASSTHROUGH (PROPRIETARY_TLV_BASE_ID + 10)
+#define TLV_TYPE_WMMQSTATUS (PROPRIETARY_TLV_BASE_ID + 16)
+#define TLV_TYPE_WILDCARDSSID (PROPRIETARY_TLV_BASE_ID + 18)
+#define TLV_TYPE_TSFTIMESTAMP (PROPRIETARY_TLV_BASE_ID + 19)
+#define TLV_TYPE_AUTH_TYPE (PROPRIETARY_TLV_BASE_ID + 31)
+#define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42)
+#define TLV_TYPE_RATE_DROP_CONTROL (PROPRIETARY_TLV_BASE_ID + 82)
+#define TLV_TYPE_RATE_SCOPE (PROPRIETARY_TLV_BASE_ID + 83)
+#define TLV_TYPE_POWER_GROUP (PROPRIETARY_TLV_BASE_ID + 84)
+#define TLV_TYPE_WAPI_IE (PROPRIETARY_TLV_BASE_ID + 94)
+#define TLV_TYPE_AUTO_DS_PARAM (PROPRIETARY_TLV_BASE_ID + 113)
+#define TLV_TYPE_PS_PARAM (PROPRIETARY_TLV_BASE_ID + 114)
+
+#define MWIFIEX_TX_DATA_BUF_SIZE_2K 2048
+
+#define SSN_MASK 0xfff0
+
+#define BA_RESULT_SUCCESS 0x0
+#define BA_RESULT_TIMEOUT 0x2
+
+#define IS_BASTREAM_SETUP(ptr) (ptr->ba_status)
+
+#define BA_STREAM_NOT_ALLOWED 0xff
+
+#define IS_11N_ENABLED(priv) ((priv->adapter->config_bands & BAND_GN || \
+ priv->adapter->config_bands & BAND_AN) \
+ && priv->curr_bss_params.bss_descriptor.bcn_ht_cap)
+#define INITIATOR_BIT(DelBAParamSet) (((DelBAParamSet) &\
+ BIT(DELBA_INITIATOR_POS)) >> DELBA_INITIATOR_POS)
+
+#define MWIFIEX_TX_DATA_BUF_SIZE_4K 4096
+#define MWIFIEX_TX_DATA_BUF_SIZE_8K 8192
+
+#define ISSUPP_11NENABLED(FwCapInfo) (FwCapInfo & BIT(11))
+
+/* dev_cap bitmap
+ * BIT
+ * 0-16 reserved
+ * 17 IEEE80211_HT_CAP_SUP_WIDTH_20_40
+ * 18-22 reserved
+ * 23 IEEE80211_HT_CAP_SGI_20
+ * 24 IEEE80211_HT_CAP_SGI_40
+ * 25 IEEE80211_HT_CAP_TX_STBC
+ * 26 IEEE80211_HT_CAP_RX_STBC
+ * 27-28 reserved
+ * 29 IEEE80211_HT_CAP_GRN_FLD
+ * 30-31 reserved
+ */
+#define ISSUPP_CHANWIDTH40(Dot11nDevCap) (Dot11nDevCap & BIT(17))
+#define ISSUPP_SHORTGI20(Dot11nDevCap) (Dot11nDevCap & BIT(23))
+#define ISSUPP_SHORTGI40(Dot11nDevCap) (Dot11nDevCap & BIT(24))
+#define ISSUPP_TXSTBC(Dot11nDevCap) (Dot11nDevCap & BIT(25))
+#define ISSUPP_RXSTBC(Dot11nDevCap) (Dot11nDevCap & BIT(26))
+#define ISSUPP_GREENFIELD(Dot11nDevCap) (Dot11nDevCap & BIT(29))
+
+#define GET_RXMCSSUPP(DevMCSSupported) (DevMCSSupported & 0x0f)
+#define SETHT_MCS32(x) (x[4] |= 1)
+
+#define SET_SECONDARYCHAN(RadioType, SECCHAN) (RadioType |= (SECCHAN << 4))
+
+#define LLC_SNAP_LEN 8
+
+#define MOD_CLASS_HR_DSSS 0x03
+#define MOD_CLASS_OFDM 0x07
+#define MOD_CLASS_HT 0x08
+#define HT_BW_20 0
+#define HT_BW_40 1
+
+#define HostCmd_CMD_GET_HW_SPEC 0x0003
+#define HostCmd_CMD_802_11_SCAN 0x0006
+#define HostCmd_CMD_802_11_GET_LOG 0x000b
+#define HostCmd_CMD_MAC_MULTICAST_ADR 0x0010
+#define HostCmd_CMD_802_11_EEPROM_ACCESS 0x0059
+#define HostCmd_CMD_802_11_ASSOCIATE 0x0012
+#define HostCmd_CMD_802_11_SNMP_MIB 0x0016
+#define HostCmd_CMD_MAC_REG_ACCESS 0x0019
+#define HostCmd_CMD_BBP_REG_ACCESS 0x001a
+#define HostCmd_CMD_RF_REG_ACCESS 0x001b
+#define HostCmd_CMD_PMIC_REG_ACCESS 0x00ad
+#define HostCmd_CMD_802_11_RF_CHANNEL 0x001d
+#define HostCmd_CMD_802_11_DEAUTHENTICATE 0x0024
+#define HostCmd_CMD_MAC_CONTROL 0x0028
+#define HostCmd_CMD_802_11_AD_HOC_START 0x002b
+#define HostCmd_CMD_802_11_AD_HOC_JOIN 0x002c
+#define HostCmd_CMD_802_11_AD_HOC_STOP 0x0040
+#define HostCmd_CMD_802_11_MAC_ADDRESS 0x004D
+#define HostCmd_CMD_802_11D_DOMAIN_INFO 0x005b
+#define HostCmd_CMD_802_11_KEY_MATERIAL 0x005e
+#define HostCmd_CMD_802_11_BG_SCAN_QUERY 0x006c
+#define HostCmd_CMD_WMM_GET_STATUS 0x0071
+#define HostCmd_CMD_802_11_TX_RATE_QUERY 0x007f
+#define HostCmd_CMD_802_11_IBSS_COALESCING_STATUS 0x0083
+#define HostCmd_CMD_VERSION_EXT 0x0097
+#define HostCmd_CMD_RSSI_INFO 0x00a4
+#define HostCmd_CMD_FUNC_INIT 0x00a9
+#define HostCmd_CMD_FUNC_SHUTDOWN 0x00aa
+#define HostCmd_CMD_11N_CFG 0x00cd
+#define HostCmd_CMD_11N_ADDBA_REQ 0x00ce
+#define HostCmd_CMD_11N_ADDBA_RSP 0x00cf
+#define HostCmd_CMD_11N_DELBA 0x00d0
+#define HostCmd_CMD_RECONFIGURE_TX_BUFF 0x00d9
+#define HostCmd_CMD_AMSDU_AGGR_CTRL 0x00df
+#define HostCmd_CMD_TXPWR_CFG 0x00d1
+#define HostCmd_CMD_TX_RATE_CFG 0x00d6
+#define HostCmd_CMD_802_11_PS_MODE_ENH 0x00e4
+#define HostCmd_CMD_802_11_HS_CFG_ENH 0x00e5
+#define HostCmd_CMD_CAU_REG_ACCESS 0x00ed
+#define HostCmd_CMD_SET_BSS_MODE 0x00f7
+
+
+enum ENH_PS_MODES {
+ EN_PS = 1,
+ DIS_PS = 2,
+ EN_AUTO_DS = 3,
+ DIS_AUTO_DS = 4,
+ SLEEP_CONFIRM = 5,
+ GET_PS = 0,
+ EN_AUTO_PS = 0xff,
+ DIS_AUTO_PS = 0xfe,
+};
+
+#define HostCmd_RET_BIT 0x8000
+#define HostCmd_ACT_GEN_GET 0x0000
+#define HostCmd_ACT_GEN_SET 0x0001
+#define HostCmd_RESULT_OK 0x0000
+
+#define HostCmd_ACT_MAC_RX_ON 0x0001
+#define HostCmd_ACT_MAC_TX_ON 0x0002
+#define HostCmd_ACT_MAC_WEP_ENABLE 0x0008
+#define HostCmd_ACT_MAC_ETHERNETII_ENABLE 0x0010
+#define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
+#define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
+#define HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON 0x2000
+
+#define HostCmd_BSS_MODE_IBSS 0x0002
+#define HostCmd_BSS_MODE_ANY 0x0003
+
+#define HostCmd_SCAN_RADIO_TYPE_BG 0
+#define HostCmd_SCAN_RADIO_TYPE_A 1
+
+#define HOST_SLEEP_CFG_CANCEL 0xffffffff
+#define HOST_SLEEP_CFG_COND_DEF 0x0000000f
+#define HOST_SLEEP_CFG_GPIO_DEF 0xff
+#define HOST_SLEEP_CFG_GAP_DEF 0
+
+#define CMD_F_HOSTCMD (1 << 0)
+#define CMD_F_CANCELED (1 << 1)
+
+#define HostCmd_CMD_ID_MASK 0x0fff
+
+#define HostCmd_SEQ_NUM_MASK 0x00ff
+
+#define HostCmd_BSS_NUM_MASK 0x0f00
+
+#define HostCmd_BSS_TYPE_MASK 0xf000
+
+#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) { \
+ (((seq) & 0x00ff) | \
+ (((num) & 0x000f) << 8)) | \
+ (((type) & 0x000f) << 12); }
+
+#define HostCmd_GET_SEQ_NO(seq) \
+ ((seq) & HostCmd_SEQ_NUM_MASK)
+
+#define HostCmd_GET_BSS_NO(seq) \
+ (((seq) & HostCmd_BSS_NUM_MASK) >> 8)
+
+#define HostCmd_GET_BSS_TYPE(seq) \
+ (((seq) & HostCmd_BSS_TYPE_MASK) >> 12)
+
+#define EVENT_DUMMY_HOST_WAKEUP_SIGNAL 0x00000001
+#define EVENT_LINK_LOST 0x00000003
+#define EVENT_LINK_SENSED 0x00000004
+#define EVENT_MIB_CHANGED 0x00000006
+#define EVENT_INIT_DONE 0x00000007
+#define EVENT_DEAUTHENTICATED 0x00000008
+#define EVENT_DISASSOCIATED 0x00000009
+#define EVENT_PS_AWAKE 0x0000000a
+#define EVENT_PS_SLEEP 0x0000000b
+#define EVENT_MIC_ERR_MULTICAST 0x0000000d
+#define EVENT_MIC_ERR_UNICAST 0x0000000e
+#define EVENT_DEEP_SLEEP_AWAKE 0x00000010
+#define EVENT_ADHOC_BCN_LOST 0x00000011
+
+#define EVENT_WMM_STATUS_CHANGE 0x00000017
+#define EVENT_BG_SCAN_REPORT 0x00000018
+#define EVENT_RSSI_LOW 0x00000019
+#define EVENT_SNR_LOW 0x0000001a
+#define EVENT_MAX_FAIL 0x0000001b
+#define EVENT_RSSI_HIGH 0x0000001c
+#define EVENT_SNR_HIGH 0x0000001d
+#define EVENT_IBSS_COALESCED 0x0000001e
+#define EVENT_DATA_RSSI_LOW 0x00000024
+#define EVENT_DATA_SNR_LOW 0x00000025
+#define EVENT_DATA_RSSI_HIGH 0x00000026
+#define EVENT_DATA_SNR_HIGH 0x00000027
+#define EVENT_LINK_QUALITY 0x00000028
+#define EVENT_PORT_RELEASE 0x0000002b
+#define EVENT_PRE_BEACON_LOST 0x00000031
+#define EVENT_ADDBA 0x00000033
+#define EVENT_DELBA 0x00000034
+#define EVENT_BA_STREAM_TIEMOUT 0x00000037
+#define EVENT_AMSDU_AGGR_CTRL 0x00000042
+#define EVENT_WEP_ICV_ERR 0x00000046
+#define EVENT_HS_ACT_REQ 0x00000047
+#define EVENT_BW_CHANGE 0x00000048
+
+#define EVENT_HOSTWAKE_STAIE 0x0000004d
+
+#define EVENT_ID_MASK 0xffff
+#define BSS_NUM_MASK 0xf
+
+#define EVENT_GET_BSS_NUM(event_cause) \
+ (((event_cause) >> 16) & BSS_NUM_MASK)
+
+#define EVENT_GET_BSS_TYPE(event_cause) \
+ (((event_cause) >> 24) & 0x00ff)
+
+struct mwifiex_ie_types_header {
+ __le16 type;
+ __le16 len;
+} __packed;
+
+struct mwifiex_ie_types_data {
+ struct mwifiex_ie_types_header header;
+ u8 data[1];
+} __packed;
+
+#define MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET 0x01
+#define MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET 0x08
+
+struct txpd {
+ u8 bss_type;
+ u8 bss_num;
+ __le16 tx_pkt_length;
+ __le16 tx_pkt_offset;
+ __le16 tx_pkt_type;
+ __le32 tx_control;
+ u8 priority;
+ u8 flags;
+ u8 pkt_delay_2ms;
+ u8 reserved1;
+} __packed;
+
+struct rxpd {
+ u8 bss_type;
+ u8 bss_num;
+ u16 rx_pkt_length;
+ u16 rx_pkt_offset;
+ u16 rx_pkt_type;
+ u16 seq_num;
+ u8 priority;
+ u8 rx_rate;
+ s8 snr;
+ s8 nf;
+ /* Ht Info [Bit 0] RxRate format: LG=0, HT=1
+ * [Bit 1] HT Bandwidth: BW20 = 0, BW40 = 1
+ * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 */
+ u8 ht_info;
+ u8 reserved;
+} __packed;
+
+enum mwifiex_chan_scan_mode_bitmasks {
+ MWIFIEX_PASSIVE_SCAN = BIT(0),
+ MWIFIEX_DISABLE_CHAN_FILT = BIT(1),
+};
+
+#define SECOND_CHANNEL_BELOW 0x30
+#define SECOND_CHANNEL_ABOVE 0x10
+struct mwifiex_chan_scan_param_set {
+ u8 radio_type;
+ u8 chan_number;
+ u8 chan_scan_mode_bitmap;
+ __le16 min_scan_time;
+ __le16 max_scan_time;
+} __packed;
+
+struct mwifiex_ie_types_chan_list_param_set {
+ struct mwifiex_ie_types_header header;
+ struct mwifiex_chan_scan_param_set chan_scan_param[1];
+} __packed;
+
+struct chan_band_param_set {
+ u8 radio_type;
+ u8 chan_number;
+};
+
+struct mwifiex_ie_types_chan_band_list_param_set {
+ struct mwifiex_ie_types_header header;
+ struct chan_band_param_set chan_band_param[1];
+} __packed;
+
+struct mwifiex_ie_types_rates_param_set {
+ struct mwifiex_ie_types_header header;
+ u8 rates[1];
+} __packed;
+
+struct mwifiex_ie_types_ssid_param_set {
+ struct mwifiex_ie_types_header header;
+ u8 ssid[1];
+} __packed;
+
+struct mwifiex_ie_types_num_probes {
+ struct mwifiex_ie_types_header header;
+ __le16 num_probes;
+} __packed;
+
+struct mwifiex_ie_types_wildcard_ssid_params {
+ struct mwifiex_ie_types_header header;
+ u8 max_ssid_length;
+ u8 ssid[1];
+} __packed;
+
+#define TSF_DATA_SIZE 8
+struct mwifiex_ie_types_tsf_timestamp {
+ struct mwifiex_ie_types_header header;
+ u8 tsf_data[1];
+} __packed;
+
+struct mwifiex_cf_param_set {
+ u8 cfp_cnt;
+ u8 cfp_period;
+ u16 cfp_max_duration;
+ u16 cfp_duration_remaining;
+} __packed;
+
+struct mwifiex_ibss_param_set {
+ u16 atim_window;
+} __packed;
+
+struct mwifiex_ie_types_ss_param_set {
+ struct mwifiex_ie_types_header header;
+ union {
+ struct mwifiex_cf_param_set cf_param_set[1];
+ struct mwifiex_ibss_param_set ibss_param_set[1];
+ } cf_ibss;
+} __packed;
+
+struct mwifiex_fh_param_set {
+ u16 dwell_time;
+ u8 hop_set;
+ u8 hop_pattern;
+ u8 hop_index;
+} __packed;
+
+struct mwifiex_ds_param_set {
+ u8 current_chan;
+} __packed;
+
+struct mwifiex_ie_types_phy_param_set {
+ struct mwifiex_ie_types_header header;
+ union {
+ struct mwifiex_fh_param_set fh_param_set[1];
+ struct mwifiex_ds_param_set ds_param_set[1];
+ } fh_ds;
+} __packed;
+
+struct mwifiex_ie_types_auth_type {
+ struct mwifiex_ie_types_header header;
+ __le16 auth_type;
+} __packed;
+
+struct mwifiex_ie_types_vendor_param_set {
+ struct mwifiex_ie_types_header header;
+ u8 ie[MWIFIEX_MAX_VSIE_LEN];
+};
+
+struct mwifiex_ie_types_rsn_param_set {
+ struct mwifiex_ie_types_header header;
+ u8 rsn_ie[1];
+} __packed;
+
+#define KEYPARAMSET_FIXED_LEN 6
+
+struct mwifiex_ie_type_key_param_set {
+ __le16 type;
+ __le16 length;
+ __le16 key_type_id;
+ __le16 key_info;
+ __le16 key_len;
+ u8 key[50];
+} __packed;
+
+struct host_cmd_ds_802_11_key_material {
+ __le16 action;
+ struct mwifiex_ie_type_key_param_set key_param_set;
+} __packed;
+
+struct host_cmd_ds_gen {
+ u16 command;
+ u16 size;
+ u16 seq_num;
+ u16 result;
+};
+
+#define S_DS_GEN sizeof(struct host_cmd_ds_gen)
+
+enum sleep_resp_ctrl {
+ RESP_NOT_NEEDED = 0,
+ RESP_NEEDED,
+};
+
+struct mwifiex_ps_param {
+ __le16 null_pkt_interval;
+ __le16 multiple_dtims;
+ __le16 bcn_miss_timeout;
+ __le16 local_listen_interval;
+ __le16 adhoc_wake_period;
+ __le16 mode;
+ __le16 delay_to_ps;
+};
+
+#define BITMAP_AUTO_DS 0x01
+#define BITMAP_STA_PS 0x10
+
+struct mwifiex_ie_types_auto_ds_param {
+ struct mwifiex_ie_types_header header;
+ __le16 deep_sleep_timeout;
+} __packed;
+
+struct mwifiex_ie_types_ps_param {
+ struct mwifiex_ie_types_header header;
+ struct mwifiex_ps_param param;
+} __packed;
+
+struct host_cmd_ds_802_11_ps_mode_enh {
+ __le16 action;
+
+ union {
+ struct mwifiex_ps_param opt_ps;
+ __le16 ps_bitmap;
+ } params;
+} __packed;
+
+struct host_cmd_ds_get_hw_spec {
+ __le16 hw_if_version;
+ __le16 version;
+ __le16 reserved;
+ __le16 num_of_mcast_adr;
+ u8 permanent_addr[ETH_ALEN];
+ __le16 region_code;
+ __le16 number_of_antenna;
+ __le32 fw_release_number;
+ __le32 reserved_1;
+ __le32 reserved_2;
+ __le32 reserved_3;
+ __le32 fw_cap_info;
+ __le32 dot_11n_dev_cap;
+ u8 dev_mcs_support;
+ __le16 mp_end_port; /* SDIO only, reserved for other interfacces */
+ __le16 reserved_4;
+} __packed;
+
+struct host_cmd_ds_802_11_rssi_info {
+ __le16 action;
+ __le16 ndata;
+ __le16 nbcn;
+ __le16 reserved[9];
+ long long reserved_1;
+};
+
+struct host_cmd_ds_802_11_rssi_info_rsp {
+ __le16 action;
+ __le16 ndata;
+ __le16 nbcn;
+ __le16 data_rssi_last;
+ __le16 data_nf_last;
+ __le16 data_rssi_avg;
+ __le16 data_nf_avg;
+ __le16 bcn_rssi_last;
+ __le16 bcn_nf_last;
+ __le16 bcn_rssi_avg;
+ __le16 bcn_nf_avg;
+ long long tsf_bcn;
+};
+
+struct host_cmd_ds_802_11_mac_address {
+ __le16 action;
+ u8 mac_addr[ETH_ALEN];
+};
+
+struct host_cmd_ds_mac_control {
+ __le16 action;
+ __le16 reserved;
+};
+
+struct host_cmd_ds_mac_multicast_adr {
+ __le16 action;
+ __le16 num_of_adrs;
+ u8 mac_list[MWIFIEX_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
+} __packed;
+
+struct host_cmd_ds_802_11_deauthenticate {
+ u8 mac_addr[ETH_ALEN];
+ __le16 reason_code;
+} __packed;
+
+struct host_cmd_ds_802_11_associate {
+ u8 peer_sta_addr[ETH_ALEN];
+ __le16 cap_info_bitmap;
+ __le16 listen_interval;
+ __le16 beacon_period;
+ u8 dtim_period;
+} __packed;
+
+struct ieee_types_assoc_rsp {
+ __le16 cap_info_bitmap;
+ __le16 status_code;
+ __le16 a_id;
+ u8 ie_buffer[1];
+} __packed;
+
+struct host_cmd_ds_802_11_associate_rsp {
+ struct ieee_types_assoc_rsp assoc_rsp;
+} __packed;
+
+struct ieee_types_cf_param_set {
+ u8 element_id;
+ u8 len;
+ u8 cfp_cnt;
+ u8 cfp_period;
+ u16 cfp_max_duration;
+ u16 cfp_duration_remaining;
+} __packed;
+
+struct ieee_types_ibss_param_set {
+ u8 element_id;
+ u8 len;
+ __le16 atim_window;
+} __packed;
+
+union ieee_types_ss_param_set {
+ struct ieee_types_cf_param_set cf_param_set;
+ struct ieee_types_ibss_param_set ibss_param_set;
+} __packed;
+
+struct ieee_types_fh_param_set {
+ u8 element_id;
+ u8 len;
+ __le16 dwell_time;
+ u8 hop_set;
+ u8 hop_pattern;
+ u8 hop_index;
+} __packed;
+
+struct ieee_types_ds_param_set {
+ u8 element_id;
+ u8 len;
+ u8 current_chan;
+} __packed;
+
+union ieee_types_phy_param_set {
+ struct ieee_types_fh_param_set fh_param_set;
+ struct ieee_types_ds_param_set ds_param_set;
+} __packed;
+
+struct host_cmd_ds_802_11_ad_hoc_start {
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 bss_mode;
+ __le16 beacon_period;
+ u8 dtim_period;
+ union ieee_types_ss_param_set ss_param_set;
+ union ieee_types_phy_param_set phy_param_set;
+ u16 reserved1;
+ __le16 cap_info_bitmap;
+ u8 DataRate[HOSTCMD_SUPPORTED_RATES];
+} __packed;
+
+struct host_cmd_ds_802_11_ad_hoc_result {
+ u8 pad[3];
+ u8 bssid[ETH_ALEN];
+} __packed;
+
+struct adhoc_bss_desc {
+ u8 bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 bss_mode;
+ __le16 beacon_period;
+ u8 dtim_period;
+ u8 time_stamp[8];
+ u8 local_time[8];
+ union ieee_types_phy_param_set phy_param_set;
+ union ieee_types_ss_param_set ss_param_set;
+ __le16 cap_info_bitmap;
+ u8 data_rates[HOSTCMD_SUPPORTED_RATES];
+
+ /*
+ * DO NOT ADD ANY FIELDS TO THIS STRUCTURE.
+ * It is used in the Adhoc join command and will cause a
+ * binary layout mismatch with the firmware
+ */
+} __packed;
+
+struct host_cmd_ds_802_11_ad_hoc_join {
+ struct adhoc_bss_desc bss_descriptor;
+ u16 reserved1;
+ u16 reserved2;
+} __packed;
+
+struct host_cmd_ds_802_11_get_log {
+ __le32 mcast_tx_frame;
+ __le32 failed;
+ __le32 retry;
+ __le32 multi_retry;
+ __le32 frame_dup;
+ __le32 rts_success;
+ __le32 rts_failure;
+ __le32 ack_failure;
+ __le32 rx_frag;
+ __le32 mcast_rx_frame;
+ __le32 fcs_error;
+ __le32 tx_frame;
+ __le32 reserved;
+ __le32 wep_icv_err_cnt[4];
+};
+
+struct host_cmd_ds_tx_rate_query {
+ u8 tx_rate;
+ /* Ht Info [Bit 0] RxRate format: LG=0, HT=1
+ * [Bit 1] HT Bandwidth: BW20 = 0, BW40 = 1
+ * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 */
+ u8 ht_info;
+} __packed;
+
+enum Host_Sleep_Action {
+ HS_CONFIGURE = 0x0001,
+ HS_ACTIVATE = 0x0002,
+};
+
+struct mwifiex_hs_config_param {
+ __le32 conditions;
+ u8 gpio;
+ u8 gap;
+} __packed;
+
+struct hs_activate_param {
+ u16 resp_ctrl;
+} __packed;
+
+struct host_cmd_ds_802_11_hs_cfg_enh {
+ __le16 action;
+
+ union {
+ struct mwifiex_hs_config_param hs_config;
+ struct hs_activate_param hs_activate;
+ } params;
+} __packed;
+
+enum SNMP_MIB_INDEX {
+ OP_RATE_SET_I = 1,
+ DTIM_PERIOD_I = 3,
+ RTS_THRESH_I = 5,
+ SHORT_RETRY_LIM_I = 6,
+ LONG_RETRY_LIM_I = 7,
+ FRAG_THRESH_I = 8,
+ DOT11D_I = 9,
+};
+
+#define MAX_SNMP_BUF_SIZE 128
+
+struct host_cmd_ds_802_11_snmp_mib {
+ __le16 query_type;
+ __le16 oid;
+ __le16 buf_size;
+ u8 value[1];
+} __packed;
+
+struct mwifiex_rate_scope {
+ __le16 type;
+ __le16 length;
+ __le16 hr_dsss_rate_bitmap;
+ __le16 ofdm_rate_bitmap;
+ __le16 ht_mcs_rate_bitmap[8];
+} __packed;
+
+struct mwifiex_rate_drop_pattern {
+ __le16 type;
+ __le16 length;
+ __le32 rate_drop_mode;
+} __packed;
+
+struct host_cmd_ds_tx_rate_cfg {
+ __le16 action;
+ __le16 cfg_index;
+} __packed;
+
+struct mwifiex_power_group {
+ u8 modulation_class;
+ u8 first_rate_code;
+ u8 last_rate_code;
+ s8 power_step;
+ s8 power_min;
+ s8 power_max;
+ u8 ht_bandwidth;
+ u8 reserved;
+} __packed;
+
+struct mwifiex_types_power_group {
+ u16 type;
+ u16 length;
+} __packed;
+
+struct host_cmd_ds_txpwr_cfg {
+ __le16 action;
+ __le16 cfg_index;
+ __le32 mode;
+} __packed;
+
+#define MWIFIEX_USER_SCAN_CHAN_MAX 50
+
+#define MWIFIEX_MAX_SSID_LIST_LENGTH 10
+
+struct mwifiex_scan_cmd_config {
+ /*
+ * BSS mode to be sent in the firmware command
+ */
+ u8 bss_mode;
+
+ /* Specific BSSID used to filter scan results in the firmware */
+ u8 specific_bssid[ETH_ALEN];
+
+ /* Length of TLVs sent in command starting at tlvBuffer */
+ u32 tlv_buf_len;
+
+ /*
+ * SSID TLV(s) and ChanList TLVs to be sent in the firmware command
+ *
+ * TLV_TYPE_CHANLIST, mwifiex_ie_types_chan_list_param_set
+ * WLAN_EID_SSID, mwifiex_ie_types_ssid_param_set
+ */
+ u8 tlv_buf[1]; /* SSID TLV(s) and ChanList TLVs are stored
+ here */
+} __packed;
+
+struct mwifiex_user_scan_chan {
+ u8 chan_number;
+ u8 radio_type;
+ u8 scan_type;
+ u8 reserved;
+ u32 scan_time;
+} __packed;
+
+struct mwifiex_user_scan_ssid {
+ u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+ u8 max_len;
+} __packed;
+
+struct mwifiex_user_scan_cfg {
+ /*
+ * Flag set to keep the previous scan table intact
+ *
+ * If set, the scan results will accumulate, replacing any previous
+ * matched entries for a BSS with the new scan data
+ */
+ u8 keep_previous_scan;
+ /*
+ * BSS mode to be sent in the firmware command
+ */
+ u8 bss_mode;
+ /* Configure the number of probe requests for active chan scans */
+ u8 num_probes;
+ u8 reserved;
+ /* BSSID filter sent in the firmware command to limit the results */
+ u8 specific_bssid[ETH_ALEN];
+ /* SSID filter list used in the to limit the scan results */
+ struct mwifiex_user_scan_ssid ssid_list[MWIFIEX_MAX_SSID_LIST_LENGTH];
+ /* Variable number (fixed maximum) of channels to scan up */
+ struct mwifiex_user_scan_chan chan_list[MWIFIEX_USER_SCAN_CHAN_MAX];
+} __packed;
+
+struct ie_body {
+ u8 grp_key_oui[4];
+ u8 ptk_cnt[2];
+ u8 ptk_body[4];
+} __packed;
+
+struct host_cmd_ds_802_11_scan {
+ u8 bss_mode;
+ u8 bssid[ETH_ALEN];
+ u8 tlv_buffer[1];
+} __packed;
+
+struct host_cmd_ds_802_11_scan_rsp {
+ __le16 bss_descript_size;
+ u8 number_of_sets;
+ u8 bss_desc_and_tlv_buffer[1];
+} __packed;
+
+struct host_cmd_ds_802_11_bg_scan_query {
+ u8 flush;
+} __packed;
+
+struct host_cmd_ds_802_11_bg_scan_query_rsp {
+ u32 report_condition;
+ struct host_cmd_ds_802_11_scan_rsp scan_resp;
+} __packed;
+
+struct mwifiex_ietypes_domain_param_set {
+ struct mwifiex_ie_types_header header;
+ u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
+ struct ieee80211_country_ie_triplet triplet[1];
+} __packed;
+
+struct host_cmd_ds_802_11d_domain_info {
+ __le16 action;
+ struct mwifiex_ietypes_domain_param_set domain;
+} __packed;
+
+struct host_cmd_ds_802_11d_domain_info_rsp {
+ __le16 action;
+ struct mwifiex_ietypes_domain_param_set domain;
+} __packed;
+
+struct host_cmd_ds_11n_addba_req {
+ u8 add_req_result;
+ u8 peer_mac_addr[ETH_ALEN];
+ u8 dialog_token;
+ __le16 block_ack_param_set;
+ __le16 block_ack_tmo;
+ __le16 ssn;
+} __packed;
+
+struct host_cmd_ds_11n_addba_rsp {
+ u8 add_rsp_result;
+ u8 peer_mac_addr[ETH_ALEN];
+ u8 dialog_token;
+ __le16 status_code;
+ __le16 block_ack_param_set;
+ __le16 block_ack_tmo;
+ __le16 ssn;
+} __packed;
+
+struct host_cmd_ds_11n_delba {
+ u8 del_result;
+ u8 peer_mac_addr[ETH_ALEN];
+ __le16 del_ba_param_set;
+ __le16 reason_code;
+ u8 reserved;
+} __packed;
+
+struct host_cmd_ds_11n_batimeout {
+ u8 tid;
+ u8 peer_mac_addr[ETH_ALEN];
+ u8 origninator;
+} __packed;
+
+struct host_cmd_ds_11n_cfg {
+ __le16 action;
+ __le16 ht_tx_cap;
+ __le16 ht_tx_info;
+} __packed;
+
+struct host_cmd_ds_txbuf_cfg {
+ __le16 action;
+ __le16 buff_size;
+ __le16 mp_end_port; /* SDIO only, reserved for other interfacces */
+ __le16 reserved3;
+} __packed;
+
+struct host_cmd_ds_amsdu_aggr_ctrl {
+ __le16 action;
+ __le16 enable;
+ __le16 curr_buf_size;
+} __packed;
+
+struct mwifiex_ie_types_wmm_param_set {
+ struct mwifiex_ie_types_header header;
+ u8 wmm_ie[1];
+};
+
+struct mwifiex_ie_types_wmm_queue_status {
+ struct mwifiex_ie_types_header header;
+ u8 queue_index;
+ u8 disabled;
+ u16 medium_time;
+ u8 flow_required;
+ u8 flow_created;
+ u32 reserved;
+};
+
+struct ieee_types_vendor_header {
+ u8 element_id;
+ u8 len;
+ u8 oui[3];
+ u8 oui_type;
+ u8 oui_subtype;
+ u8 version;
+} __packed;
+
+struct ieee_types_wmm_ac_parameters {
+ u8 aci_aifsn_bitmap;
+ u8 ecw_bitmap;
+ __le16 tx_op_limit;
+} __packed;
+
+struct ieee_types_wmm_parameter {
+ /*
+ * WMM Parameter IE - Vendor Specific Header:
+ * element_id [221/0xdd]
+ * Len [24]
+ * Oui [00:50:f2]
+ * OuiType [2]
+ * OuiSubType [1]
+ * Version [1]
+ */
+ struct ieee_types_vendor_header vend_hdr;
+ u8 qos_info_bitmap;
+ u8 reserved;
+ struct ieee_types_wmm_ac_parameters ac_params[IEEE80211_MAX_QUEUES];
+} __packed;
+
+struct ieee_types_wmm_info {
+
+ /*
+ * WMM Info IE - Vendor Specific Header:
+ * element_id [221/0xdd]
+ * Len [7]
+ * Oui [00:50:f2]
+ * OuiType [2]
+ * OuiSubType [0]
+ * Version [1]
+ */
+ struct ieee_types_vendor_header vend_hdr;
+
+ u8 qos_info_bitmap;
+} __packed;
+
+struct host_cmd_ds_wmm_get_status {
+ u8 queue_status_tlv[sizeof(struct mwifiex_ie_types_wmm_queue_status) *
+ IEEE80211_MAX_QUEUES];
+ u8 wmm_param_tlv[sizeof(struct ieee_types_wmm_parameter) + 2];
+} __packed;
+
+struct mwifiex_wmm_ac_status {
+ u8 disabled;
+ u8 flow_required;
+ u8 flow_created;
+};
+
+struct mwifiex_ie_types_htcap {
+ struct mwifiex_ie_types_header header;
+ struct ieee80211_ht_cap ht_cap;
+} __packed;
+
+struct mwifiex_ie_types_htinfo {
+ struct mwifiex_ie_types_header header;
+ struct ieee80211_ht_info ht_info;
+} __packed;
+
+struct mwifiex_ie_types_2040bssco {
+ struct mwifiex_ie_types_header header;
+ u8 bss_co_2040;
+} __packed;
+
+struct mwifiex_ie_types_extcap {
+ struct mwifiex_ie_types_header header;
+ u8 ext_cap;
+} __packed;
+
+struct host_cmd_ds_mac_reg_access {
+ __le16 action;
+ __le16 offset;
+ __le32 value;
+} __packed;
+
+struct host_cmd_ds_bbp_reg_access {
+ __le16 action;
+ __le16 offset;
+ u8 value;
+ u8 reserved[3];
+} __packed;
+
+struct host_cmd_ds_rf_reg_access {
+ __le16 action;
+ __le16 offset;
+ u8 value;
+ u8 reserved[3];
+} __packed;
+
+struct host_cmd_ds_pmic_reg_access {
+ __le16 action;
+ __le16 offset;
+ u8 value;
+ u8 reserved[3];
+} __packed;
+
+struct host_cmd_ds_802_11_eeprom_access {
+ __le16 action;
+
+ __le16 offset;
+ __le16 byte_count;
+ u8 value;
+} __packed;
+
+struct host_cmd_ds_802_11_rf_channel {
+ __le16 action;
+ __le16 current_channel;
+ __le16 rf_type;
+ __le16 reserved;
+ u8 reserved_1[32];
+} __packed;
+
+struct host_cmd_ds_version_ext {
+ u8 version_str_sel;
+ char version_str[128];
+} __packed;
+
+struct host_cmd_ds_802_11_ibss_status {
+ __le16 action;
+ __le16 enable;
+ u8 bssid[ETH_ALEN];
+ __le16 beacon_interval;
+ __le16 atim_window;
+ __le16 use_g_rate_protect;
+} __packed;
+
+#define CONNECTION_TYPE_INFRA 0
+#define CONNECTION_TYPE_ADHOC 1
+
+struct host_cmd_ds_set_bss_mode {
+ u8 con_type;
+} __packed;
+
+struct host_cmd_ds_command {
+ __le16 command;
+ __le16 size;
+ __le16 seq_num;
+ __le16 result;
+ union {
+ struct host_cmd_ds_get_hw_spec hw_spec;
+ struct host_cmd_ds_mac_control mac_ctrl;
+ struct host_cmd_ds_802_11_mac_address mac_addr;
+ struct host_cmd_ds_mac_multicast_adr mc_addr;
+ struct host_cmd_ds_802_11_get_log get_log;
+ struct host_cmd_ds_802_11_rssi_info rssi_info;
+ struct host_cmd_ds_802_11_rssi_info_rsp rssi_info_rsp;
+ struct host_cmd_ds_802_11_snmp_mib smib;
+ struct host_cmd_ds_802_11_rf_channel rf_channel;
+ struct host_cmd_ds_tx_rate_query tx_rate;
+ struct host_cmd_ds_tx_rate_cfg tx_rate_cfg;
+ struct host_cmd_ds_txpwr_cfg txp_cfg;
+ struct host_cmd_ds_802_11_ps_mode_enh psmode_enh;
+ struct host_cmd_ds_802_11_hs_cfg_enh opt_hs_cfg;
+ struct host_cmd_ds_802_11_scan scan;
+ struct host_cmd_ds_802_11_scan_rsp scan_resp;
+ struct host_cmd_ds_802_11_bg_scan_query bg_scan_query;
+ struct host_cmd_ds_802_11_bg_scan_query_rsp bg_scan_query_resp;
+ struct host_cmd_ds_802_11_associate associate;
+ struct host_cmd_ds_802_11_associate_rsp associate_rsp;
+ struct host_cmd_ds_802_11_deauthenticate deauth;
+ struct host_cmd_ds_802_11_ad_hoc_start adhoc_start;
+ struct host_cmd_ds_802_11_ad_hoc_result adhoc_result;
+ struct host_cmd_ds_802_11_ad_hoc_join adhoc_join;
+ struct host_cmd_ds_802_11d_domain_info domain_info;
+ struct host_cmd_ds_802_11d_domain_info_rsp domain_info_resp;
+ struct host_cmd_ds_11n_addba_req add_ba_req;
+ struct host_cmd_ds_11n_addba_rsp add_ba_rsp;
+ struct host_cmd_ds_11n_delba del_ba;
+ struct host_cmd_ds_txbuf_cfg tx_buf;
+ struct host_cmd_ds_amsdu_aggr_ctrl amsdu_aggr_ctrl;
+ struct host_cmd_ds_11n_cfg htcfg;
+ struct host_cmd_ds_wmm_get_status get_wmm_status;
+ struct host_cmd_ds_802_11_key_material key_material;
+ struct host_cmd_ds_version_ext verext;
+ struct host_cmd_ds_802_11_ibss_status ibss_coalescing;
+ struct host_cmd_ds_mac_reg_access mac_reg;
+ struct host_cmd_ds_bbp_reg_access bbp_reg;
+ struct host_cmd_ds_rf_reg_access rf_reg;
+ struct host_cmd_ds_pmic_reg_access pmic_reg;
+ struct host_cmd_ds_set_bss_mode bss_mode;
+ struct host_cmd_ds_802_11_eeprom_access eeprom;
+ } params;
+} __packed;
+
+struct mwifiex_opt_sleep_confirm {
+ __le16 command;
+ __le16 size;
+ __le16 seq_num;
+ __le16 result;
+ __le16 action;
+ __le16 resp_ctrl;
+} __packed;
+#endif /* !_MWIFIEX_FW_H_ */
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
new file mode 100644
index 0000000..3f1559e
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -0,0 +1,645 @@
+/*
+ * Marvell Wireless LAN device driver: HW/FW Initialization
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+/*
+ * This function adds a BSS priority table to the table list.
+ *
+ * The function allocates a new BSS priority table node and adds it to
+ * the end of BSS priority table list, kept in driver memory.
+ */
+static int mwifiex_add_bss_prio_tbl(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bss_prio_node *bss_prio;
+ unsigned long flags;
+
+ bss_prio = kzalloc(sizeof(struct mwifiex_bss_prio_node), GFP_KERNEL);
+ if (!bss_prio) {
+ dev_err(adapter->dev, "%s: failed to alloc bss_prio\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ bss_prio->priv = priv;
+ INIT_LIST_HEAD(&bss_prio->list);
+ if (!adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur)
+ adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur =
+ bss_prio;
+
+ spin_lock_irqsave(&adapter->bss_prio_tbl[priv->bss_priority]
+ .bss_prio_lock, flags);
+ list_add_tail(&bss_prio->list,
+ &adapter->bss_prio_tbl[priv->bss_priority]
+ .bss_prio_head);
+ spin_unlock_irqrestore(&adapter->bss_prio_tbl[priv->bss_priority]
+ .bss_prio_lock, flags);
+
+ return 0;
+}
+
+/*
+ * This function initializes the private structure and sets default
+ * values to the members.
+ *
+ * Additionally, it also initializes all the locks and sets up all the
+ * lists.
+ */
+static int mwifiex_init_priv(struct mwifiex_private *priv)
+{
+ u32 i;
+
+ priv->media_connected = false;
+ memset(priv->curr_addr, 0xff, ETH_ALEN);
+
+ priv->pkt_tx_ctrl = 0;
+ priv->bss_mode = NL80211_IFTYPE_STATION;
+ priv->data_rate = 0; /* Initially indicate the rate as auto */
+ priv->is_data_rate_auto = true;
+ priv->bcn_avg_factor = DEFAULT_BCN_AVG_FACTOR;
+ priv->data_avg_factor = DEFAULT_DATA_AVG_FACTOR;
+
+ priv->sec_info.wep_status = MWIFIEX_802_11_WEP_DISABLED;
+ priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
+ priv->sec_info.encryption_mode = 0;
+ for (i = 0; i < ARRAY_SIZE(priv->wep_key); i++)
+ memset(&priv->wep_key[i], 0, sizeof(struct mwifiex_wep_key));
+ priv->wep_key_curr_index = 0;
+ priv->curr_pkt_filter = HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON |
+ HostCmd_ACT_MAC_ETHERNETII_ENABLE;
+
+ priv->beacon_period = 100; /* beacon interval */ ;
+ priv->attempted_bss_desc = NULL;
+ memset(&priv->curr_bss_params, 0, sizeof(priv->curr_bss_params));
+ priv->listen_interval = MWIFIEX_DEFAULT_LISTEN_INTERVAL;
+
+ memset(&priv->prev_ssid, 0, sizeof(priv->prev_ssid));
+ memset(&priv->prev_bssid, 0, sizeof(priv->prev_bssid));
+ memset(&priv->assoc_rsp_buf, 0, sizeof(priv->assoc_rsp_buf));
+ priv->assoc_rsp_size = 0;
+ priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
+ priv->atim_window = 0;
+ priv->adhoc_state = ADHOC_IDLE;
+ priv->tx_power_level = 0;
+ priv->max_tx_power_level = 0;
+ priv->min_tx_power_level = 0;
+ priv->tx_rate = 0;
+ priv->rxpd_htinfo = 0;
+ priv->rxpd_rate = 0;
+ priv->rate_bitmap = 0;
+ priv->data_rssi_last = 0;
+ priv->data_rssi_avg = 0;
+ priv->data_nf_avg = 0;
+ priv->data_nf_last = 0;
+ priv->bcn_rssi_last = 0;
+ priv->bcn_rssi_avg = 0;
+ priv->bcn_nf_avg = 0;
+ priv->bcn_nf_last = 0;
+ memset(&priv->wpa_ie, 0, sizeof(priv->wpa_ie));
+ memset(&priv->aes_key, 0, sizeof(priv->aes_key));
+ priv->wpa_ie_len = 0;
+ priv->wpa_is_gtk_set = false;
+
+ memset(&priv->assoc_tlv_buf, 0, sizeof(priv->assoc_tlv_buf));
+ priv->assoc_tlv_buf_len = 0;
+ memset(&priv->wps, 0, sizeof(priv->wps));
+ memset(&priv->gen_ie_buf, 0, sizeof(priv->gen_ie_buf));
+ priv->gen_ie_buf_len = 0;
+ memset(priv->vs_ie, 0, sizeof(priv->vs_ie));
+
+ priv->wmm_required = true;
+ priv->wmm_enabled = false;
+ priv->wmm_qosinfo = 0;
+ priv->curr_bcn_buf = NULL;
+ priv->curr_bcn_size = 0;
+
+ priv->scan_block = false;
+
+ return mwifiex_add_bss_prio_tbl(priv);
+}
+
+/*
+ * This function allocates buffers for members of the adapter
+ * structure.
+ *
+ * The memory allocated includes scan table, command buffers, and
+ * sleep confirm command buffer. In addition, the queues are
+ * also initialized.
+ */
+static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter)
+{
+ int ret;
+ u32 buf_size;
+ struct mwifiex_bssdescriptor *temp_scan_table;
+
+ /* Allocate buffer to store the BSSID list */
+ buf_size = sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP;
+ temp_scan_table = kzalloc(buf_size, GFP_KERNEL);
+ if (!temp_scan_table) {
+ dev_err(adapter->dev, "%s: failed to alloc temp_scan_table\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ adapter->scan_table = temp_scan_table;
+
+ /* Allocate command buffer */
+ ret = mwifiex_alloc_cmd_buffer(adapter);
+ if (ret) {
+ dev_err(adapter->dev, "%s: failed to alloc cmd buffer\n",
+ __func__);
+ return -1;
+ }
+
+ adapter->sleep_cfm =
+ dev_alloc_skb(sizeof(struct mwifiex_opt_sleep_confirm)
+ + INTF_HEADER_LEN);
+
+ if (!adapter->sleep_cfm) {
+ dev_err(adapter->dev, "%s: failed to alloc sleep cfm"
+ " cmd buffer\n", __func__);
+ return -1;
+ }
+ skb_reserve(adapter->sleep_cfm, INTF_HEADER_LEN);
+
+ return 0;
+}
+
+/*
+ * This function initializes the adapter structure and sets default
+ * values to the members of adapter.
+ *
+ * This also initializes the WMM related parameters in the driver private
+ * structures.
+ */
+static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_opt_sleep_confirm *sleep_cfm_buf = NULL;
+
+ skb_put(adapter->sleep_cfm, sizeof(struct mwifiex_opt_sleep_confirm));
+ sleep_cfm_buf = (struct mwifiex_opt_sleep_confirm *)
+ (adapter->sleep_cfm->data);
+
+ adapter->cmd_sent = false;
+ adapter->data_sent = true;
+ adapter->cmd_resp_received = false;
+ adapter->event_received = false;
+ adapter->data_received = false;
+
+ adapter->surprise_removed = false;
+
+ adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING;
+
+ adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
+ adapter->ps_state = PS_STATE_AWAKE;
+ adapter->need_to_wakeup = false;
+
+ adapter->scan_mode = HostCmd_BSS_MODE_ANY;
+ adapter->specific_scan_time = MWIFIEX_SPECIFIC_SCAN_CHAN_TIME;
+ adapter->active_scan_time = MWIFIEX_ACTIVE_SCAN_CHAN_TIME;
+ adapter->passive_scan_time = MWIFIEX_PASSIVE_SCAN_CHAN_TIME;
+
+ adapter->num_in_scan_table = 0;
+ memset(adapter->scan_table, 0,
+ (sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP));
+ adapter->scan_probes = 1;
+
+ memset(adapter->bcn_buf, 0, sizeof(adapter->bcn_buf));
+ adapter->bcn_buf_end = adapter->bcn_buf;
+
+ adapter->multiple_dtim = 1;
+
+ adapter->local_listen_interval = 0; /* default value in firmware
+ will be used */
+
+ adapter->is_deep_sleep = false;
+
+ adapter->delay_null_pkt = false;
+ adapter->delay_to_ps = 1000;
+ adapter->enhanced_ps_mode = PS_MODE_AUTO;
+
+ adapter->gen_null_pkt = false; /* Disable NULL Pkg generation by
+ default */
+ adapter->pps_uapsd_mode = false; /* Disable pps/uapsd mode by
+ default */
+ adapter->pm_wakeup_card_req = false;
+
+ adapter->pm_wakeup_fw_try = false;
+
+ adapter->max_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+ adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+ adapter->curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+
+ adapter->is_hs_configured = false;
+ adapter->hs_cfg.conditions = cpu_to_le32(HOST_SLEEP_CFG_COND_DEF);
+ adapter->hs_cfg.gpio = HOST_SLEEP_CFG_GPIO_DEF;
+ adapter->hs_cfg.gap = HOST_SLEEP_CFG_GAP_DEF;
+ adapter->hs_activated = false;
+
+ memset(adapter->event_body, 0, sizeof(adapter->event_body));
+ adapter->hw_dot_11n_dev_cap = 0;
+ adapter->hw_dev_mcs_support = 0;
+ adapter->chan_offset = 0;
+ adapter->adhoc_11n_enabled = false;
+
+ mwifiex_wmm_init(adapter);
+
+ if (adapter->sleep_cfm) {
+ memset(sleep_cfm_buf, 0, adapter->sleep_cfm->len);
+ sleep_cfm_buf->command =
+ cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH);
+ sleep_cfm_buf->size =
+ cpu_to_le16(adapter->sleep_cfm->len);
+ sleep_cfm_buf->result = 0;
+ sleep_cfm_buf->action = cpu_to_le16(SLEEP_CONFIRM);
+ sleep_cfm_buf->resp_ctrl = cpu_to_le16(RESP_NEEDED);
+ }
+ memset(&adapter->sleep_params, 0, sizeof(adapter->sleep_params));
+ memset(&adapter->sleep_period, 0, sizeof(adapter->sleep_period));
+ adapter->tx_lock_flag = false;
+ adapter->null_pkt_interval = 0;
+ adapter->fw_bands = 0;
+ adapter->config_bands = 0;
+ adapter->adhoc_start_band = 0;
+ adapter->scan_channels = NULL;
+ adapter->fw_release_number = 0;
+ adapter->fw_cap_info = 0;
+ memset(&adapter->upld_buf, 0, sizeof(adapter->upld_buf));
+ adapter->event_cause = 0;
+ adapter->region_code = 0;
+ adapter->bcn_miss_time_out = DEFAULT_BCN_MISS_TIMEOUT;
+ adapter->adhoc_awake_period = 0;
+ memset(&adapter->arp_filter, 0, sizeof(adapter->arp_filter));
+ adapter->arp_filter_size = 0;
+}
+
+/*
+ * This function frees the adapter structure.
+ *
+ * The freeing operation is done recursively, by canceling all
+ * pending commands, freeing the member buffers previously
+ * allocated (command buffers, scan table buffer, sleep confirm
+ * command buffer), stopping the timers and calling the cleanup
+ * routines for every interface, before the actual adapter
+ * structure is freed.
+ */
+static void
+mwifiex_free_adapter(struct mwifiex_adapter *adapter)
+{
+ if (!adapter) {
+ pr_err("%s: adapter is NULL\n", __func__);
+ return;
+ }
+
+ mwifiex_cancel_all_pending_cmd(adapter);
+
+ /* Free lock variables */
+ mwifiex_free_lock_list(adapter);
+
+ /* Free command buffer */
+ dev_dbg(adapter->dev, "info: free cmd buffer\n");
+ mwifiex_free_cmd_buffer(adapter);
+
+ del_timer(&adapter->cmd_timer);
+
+ dev_dbg(adapter->dev, "info: free scan table\n");
+ kfree(adapter->scan_table);
+ adapter->scan_table = NULL;
+
+ adapter->if_ops.cleanup_if(adapter);
+
+ dev_kfree_skb_any(adapter->sleep_cfm);
+}
+
+/*
+ * This function intializes the lock variables and
+ * the list heads.
+ */
+int mwifiex_init_lock_list(struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_private *priv;
+ s32 i, j;
+
+ spin_lock_init(&adapter->mwifiex_lock);
+ spin_lock_init(&adapter->int_lock);
+ spin_lock_init(&adapter->main_proc_lock);
+ spin_lock_init(&adapter->mwifiex_cmd_lock);
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ priv = adapter->priv[i];
+ spin_lock_init(&priv->rx_pkt_lock);
+ spin_lock_init(&priv->wmm.ra_list_spinlock);
+ spin_lock_init(&priv->curr_bcn_buf_lock);
+ }
+ }
+
+ /* Initialize cmd_free_q */
+ INIT_LIST_HEAD(&adapter->cmd_free_q);
+ /* Initialize cmd_pending_q */
+ INIT_LIST_HEAD(&adapter->cmd_pending_q);
+ /* Initialize scan_pending_q */
+ INIT_LIST_HEAD(&adapter->scan_pending_q);
+
+ spin_lock_init(&adapter->cmd_free_q_lock);
+ spin_lock_init(&adapter->cmd_pending_q_lock);
+ spin_lock_init(&adapter->scan_pending_q_lock);
+
+ for (i = 0; i < adapter->priv_num; ++i) {
+ INIT_LIST_HEAD(&adapter->bss_prio_tbl[i].bss_prio_head);
+ adapter->bss_prio_tbl[i].bss_prio_cur = NULL;
+ spin_lock_init(&adapter->bss_prio_tbl[i].bss_prio_lock);
+ }
+
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (!adapter->priv[i])
+ continue;
+ priv = adapter->priv[i];
+ for (j = 0; j < MAX_NUM_TID; ++j) {
+ INIT_LIST_HEAD(&priv->wmm.tid_tbl_ptr[j].ra_list);
+ spin_lock_init(&priv->wmm.tid_tbl_ptr[j].tid_tbl_lock);
+ }
+ INIT_LIST_HEAD(&priv->tx_ba_stream_tbl_ptr);
+ INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
+
+ spin_lock_init(&priv->tx_ba_stream_tbl_lock);
+ spin_lock_init(&priv->rx_reorder_tbl_lock);
+ }
+
+ return 0;
+}
+
+/*
+ * This function releases the lock variables and frees the locks and
+ * associated locks.
+ */
+void mwifiex_free_lock_list(struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_private *priv;
+ s32 i, j;
+
+ /* Free lists */
+ list_del(&adapter->cmd_free_q);
+ list_del(&adapter->cmd_pending_q);
+ list_del(&adapter->scan_pending_q);
+
+ for (i = 0; i < adapter->priv_num; i++)
+ list_del(&adapter->bss_prio_tbl[i].bss_prio_head);
+
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ priv = adapter->priv[i];
+ for (j = 0; j < MAX_NUM_TID; ++j)
+ list_del(&priv->wmm.tid_tbl_ptr[j].ra_list);
+ list_del(&priv->tx_ba_stream_tbl_ptr);
+ list_del(&priv->rx_reorder_tbl_ptr);
+ }
+ }
+}
+
+/*
+ * This function initializes the firmware.
+ *
+ * The following operations are performed sequentially -
+ * - Allocate adapter structure
+ * - Initialize the adapter structure
+ * - Initialize the private structure
+ * - Add BSS priority tables to the adapter structure
+ * - For each interface, send the init commands to firmware
+ * - Send the first command in command pending queue, if available
+ */
+int mwifiex_init_fw(struct mwifiex_adapter *adapter)
+{
+ int ret;
+ struct mwifiex_private *priv;
+ u8 i, first_sta = true;
+ int is_cmd_pend_q_empty;
+ unsigned long flags;
+
+ adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING;
+
+ /* Allocate memory for member of adapter structure */
+ ret = mwifiex_allocate_adapter(adapter);
+ if (ret)
+ return -1;
+
+ /* Initialize adapter structure */
+ mwifiex_init_adapter(adapter);
+
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ priv = adapter->priv[i];
+
+ /* Initialize private structure */
+ ret = mwifiex_init_priv(priv);
+ if (ret)
+ return -1;
+ }
+ }
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta);
+ if (ret == -1)
+ return -1;
+
+ first_sta = false;
+ }
+ }
+
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags);
+ is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
+ if (!is_cmd_pend_q_empty) {
+ /* Send the first command in queue and return */
+ if (mwifiex_main_process(adapter) != -1)
+ ret = -EINPROGRESS;
+ } else {
+ adapter->hw_status = MWIFIEX_HW_STATUS_READY;
+ }
+
+ return ret;
+}
+
+/*
+ * This function deletes the BSS priority tables.
+ *
+ * The function traverses through all the allocated BSS priority nodes
+ * in every BSS priority table and frees them.
+ */
+static void mwifiex_delete_bss_prio_tbl(struct mwifiex_private *priv)
+{
+ int i;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bss_prio_node *bssprio_node, *tmp_node, **cur;
+ struct list_head *head;
+ spinlock_t *lock;
+ unsigned long flags;
+
+ for (i = 0; i < adapter->priv_num; ++i) {
+ head = &adapter->bss_prio_tbl[i].bss_prio_head;
+ cur = &adapter->bss_prio_tbl[i].bss_prio_cur;
+ lock = &adapter->bss_prio_tbl[i].bss_prio_lock;
+ dev_dbg(adapter->dev, "info: delete BSS priority table,"
+ " index = %d, i = %d, head = %p, cur = %p\n",
+ priv->bss_index, i, head, *cur);
+ if (*cur) {
+ spin_lock_irqsave(lock, flags);
+ if (list_empty(head)) {
+ spin_unlock_irqrestore(lock, flags);
+ continue;
+ }
+ bssprio_node = list_first_entry(head,
+ struct mwifiex_bss_prio_node, list);
+ spin_unlock_irqrestore(lock, flags);
+
+ list_for_each_entry_safe(bssprio_node, tmp_node, head,
+ list) {
+ if (bssprio_node->priv == priv) {
+ dev_dbg(adapter->dev, "info: Delete "
+ "node %p, next = %p\n",
+ bssprio_node, tmp_node);
+ spin_lock_irqsave(lock, flags);
+ list_del(&bssprio_node->list);
+ spin_unlock_irqrestore(lock, flags);
+ kfree(bssprio_node);
+ }
+ }
+ *cur = (struct mwifiex_bss_prio_node *)head;
+ }
+ }
+}
+
+/*
+ * This function is used to shutdown the driver.
+ *
+ * The following operations are performed sequentially -
+ * - Check if already shut down
+ * - Make sure the main process has stopped
+ * - Clean up the Tx and Rx queues
+ * - Delete BSS priority tables
+ * - Free the adapter
+ * - Notify completion
+ */
+int
+mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
+{
+ int ret = -EINPROGRESS;
+ struct mwifiex_private *priv;
+ s32 i;
+ unsigned long flags;
+
+ /* mwifiex already shutdown */
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY)
+ return 0;
+
+ adapter->hw_status = MWIFIEX_HW_STATUS_CLOSING;
+ /* wait for mwifiex_process to complete */
+ if (adapter->mwifiex_processing) {
+ dev_warn(adapter->dev, "main process is still running\n");
+ return ret;
+ }
+
+ /* shut down mwifiex */
+ dev_dbg(adapter->dev, "info: shutdown mwifiex...\n");
+
+ /* Clean up Tx/Rx queues and delete BSS priority table */
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ priv = adapter->priv[i];
+
+ mwifiex_clean_txrx(priv);
+ mwifiex_delete_bss_prio_tbl(priv);
+ }
+ }
+
+ spin_lock_irqsave(&adapter->mwifiex_lock, flags);
+
+ /* Free adapter structure */
+ mwifiex_free_adapter(adapter);
+
+ spin_unlock_irqrestore(&adapter->mwifiex_lock, flags);
+
+ /* Notify completion */
+ ret = mwifiex_shutdown_fw_complete(adapter);
+
+ return ret;
+}
+
+/*
+ * This function downloads the firmware to the card.
+ *
+ * The actual download is preceded by two sanity checks -
+ * - Check if firmware is already running
+ * - Check if the interface is the winner to download the firmware
+ *
+ * ...and followed by another -
+ * - Check if the firmware is downloaded successfully
+ *
+ * After download is successfully completed, the host interrupts are enabled.
+ */
+int mwifiex_dnld_fw(struct mwifiex_adapter *adapter,
+ struct mwifiex_fw_image *pmfw)
+{
+ int ret, winner;
+ u32 poll_num = 1;
+
+ /* Check if firmware is already running */
+ ret = adapter->if_ops.check_fw_status(adapter, poll_num, &winner);
+ if (!ret) {
+ dev_notice(adapter->dev,
+ "WLAN FW already running! Skip FW download\n");
+ goto done;
+ }
+ poll_num = MAX_FIRMWARE_POLL_TRIES;
+
+ /* Check if we are the winner for downloading FW */
+ if (!winner) {
+ dev_notice(adapter->dev,
+ "Other interface already running!"
+ " Skip FW download\n");
+ poll_num = MAX_MULTI_INTERFACE_POLL_TRIES;
+ goto poll_fw;
+ }
+ if (pmfw) {
+ /* Download firmware with helper */
+ ret = adapter->if_ops.prog_fw(adapter, pmfw);
+ if (ret) {
+ dev_err(adapter->dev, "prog_fw failed ret=%#x\n", ret);
+ return ret;
+ }
+ }
+
+poll_fw:
+ /* Check if the firmware is downloaded successfully or not */
+ ret = adapter->if_ops.check_fw_status(adapter, poll_num, NULL);
+ if (ret) {
+ dev_err(adapter->dev, "FW failed to be active in time\n");
+ return -1;
+ }
+done:
+ /* re-enable host interrupt for mwifiex after fw dnld is successful */
+ adapter->if_ops.enable_int(adapter);
+ return ret;
+}
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
new file mode 100644
index 0000000..7c1c5ee
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -0,0 +1,331 @@
+/*
+ * Marvell Wireless LAN device driver: ioctl data structures & APIs
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_IOCTL_H_
+#define _MWIFIEX_IOCTL_H_
+
+#include <net/mac80211.h>
+
+enum {
+ MWIFIEX_SCAN_TYPE_UNCHANGED = 0,
+ MWIFIEX_SCAN_TYPE_ACTIVE,
+ MWIFIEX_SCAN_TYPE_PASSIVE
+};
+
+struct mwifiex_user_scan {
+ u32 scan_cfg_len;
+ u8 scan_cfg_buf[1];
+};
+
+#define MWIFIEX_PROMISC_MODE 1
+#define MWIFIEX_MULTICAST_MODE 2
+#define MWIFIEX_ALL_MULTI_MODE 4
+#define MWIFIEX_MAX_MULTICAST_LIST_SIZE 32
+
+struct mwifiex_multicast_list {
+ u32 mode;
+ u32 num_multicast_addr;
+ u8 mac_list[MWIFIEX_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
+};
+
+struct mwifiex_chan_freq {
+ u32 channel;
+ u32 freq;
+};
+
+struct mwifiex_ssid_bssid {
+ struct mwifiex_802_11_ssid ssid;
+ u8 bssid[ETH_ALEN];
+};
+
+enum {
+ BAND_B = 1,
+ BAND_G = 2,
+ BAND_A = 4,
+ BAND_GN = 8,
+ BAND_AN = 16,
+};
+
+#define NO_SEC_CHANNEL 0
+#define SEC_CHANNEL_ABOVE 1
+#define SEC_CHANNEL_BELOW 3
+
+struct mwifiex_ds_band_cfg {
+ u32 config_bands;
+ u32 adhoc_start_band;
+ u32 adhoc_channel;
+ u32 sec_chan_offset;
+};
+
+enum {
+ ADHOC_IDLE,
+ ADHOC_STARTED,
+ ADHOC_JOINED,
+ ADHOC_COALESCED
+};
+
+struct mwifiex_ds_get_stats {
+ u32 mcast_tx_frame;
+ u32 failed;
+ u32 retry;
+ u32 multi_retry;
+ u32 frame_dup;
+ u32 rts_success;
+ u32 rts_failure;
+ u32 ack_failure;
+ u32 rx_frag;
+ u32 mcast_rx_frame;
+ u32 fcs_error;
+ u32 tx_frame;
+ u32 wep_icv_error[4];
+};
+
+#define BCN_RSSI_AVG_MASK 0x00000002
+#define BCN_NF_AVG_MASK 0x00000200
+#define ALL_RSSI_INFO_MASK 0x00000fff
+
+struct mwifiex_ds_get_signal {
+ /*
+ * Bit0: Last Beacon RSSI, Bit1: Average Beacon RSSI,
+ * Bit2: Last Data RSSI, Bit3: Average Data RSSI,
+ * Bit4: Last Beacon SNR, Bit5: Average Beacon SNR,
+ * Bit6: Last Data SNR, Bit7: Average Data SNR,
+ * Bit8: Last Beacon NF, Bit9: Average Beacon NF,
+ * Bit10: Last Data NF, Bit11: Average Data NF
+ */
+ u16 selector;
+ s16 bcn_rssi_last;
+ s16 bcn_rssi_avg;
+ s16 data_rssi_last;
+ s16 data_rssi_avg;
+ s16 bcn_snr_last;
+ s16 bcn_snr_avg;
+ s16 data_snr_last;
+ s16 data_snr_avg;
+ s16 bcn_nf_last;
+ s16 bcn_nf_avg;
+ s16 data_nf_last;
+ s16 data_nf_avg;
+};
+
+#define MWIFIEX_MAX_VER_STR_LEN 128
+
+struct mwifiex_ver_ext {
+ u32 version_str_sel;
+ char version_str[MWIFIEX_MAX_VER_STR_LEN];
+};
+
+struct mwifiex_bss_info {
+ u32 bss_mode;
+ struct mwifiex_802_11_ssid ssid;
+ u32 scan_table_idx;
+ u32 bss_chan;
+ u32 region_code;
+ u32 media_connected;
+ u32 max_power_level;
+ u32 min_power_level;
+ u32 adhoc_state;
+ signed int bcn_nf_last;
+ u32 wep_status;
+ u32 is_hs_configured;
+ u32 is_deep_sleep;
+ u8 bssid[ETH_ALEN];
+};
+
+#define MAX_NUM_TID 8
+
+#define MAX_RX_WINSIZE 64
+
+struct mwifiex_ds_rx_reorder_tbl {
+ u16 tid;
+ u8 ta[ETH_ALEN];
+ u32 start_win;
+ u32 win_size;
+ u32 buffer[MAX_RX_WINSIZE];
+};
+
+struct mwifiex_ds_tx_ba_stream_tbl {
+ u16 tid;
+ u8 ra[ETH_ALEN];
+};
+
+#define DBG_CMD_NUM 5
+
+struct mwifiex_debug_info {
+ u32 int_counter;
+ u32 packets_out[MAX_NUM_TID];
+ u32 max_tx_buf_size;
+ u32 tx_buf_size;
+ u32 curr_tx_buf_size;
+ u32 tx_tbl_num;
+ struct mwifiex_ds_tx_ba_stream_tbl
+ tx_tbl[MWIFIEX_MAX_TX_BASTREAM_SUPPORTED];
+ u32 rx_tbl_num;
+ struct mwifiex_ds_rx_reorder_tbl rx_tbl
+ [MWIFIEX_MAX_RX_BASTREAM_SUPPORTED];
+ u16 ps_mode;
+ u32 ps_state;
+ u8 is_deep_sleep;
+ u8 pm_wakeup_card_req;
+ u32 pm_wakeup_fw_try;
+ u8 is_hs_configured;
+ u8 hs_activated;
+ u32 num_cmd_host_to_card_failure;
+ u32 num_cmd_sleep_cfm_host_to_card_failure;
+ u32 num_tx_host_to_card_failure;
+ u32 num_event_deauth;
+ u32 num_event_disassoc;
+ u32 num_event_link_lost;
+ u32 num_cmd_deauth;
+ u32 num_cmd_assoc_success;
+ u32 num_cmd_assoc_failure;
+ u32 num_tx_timeout;
+ u32 num_cmd_timeout;
+ u16 timeout_cmd_id;
+ u16 timeout_cmd_act;
+ u16 last_cmd_id[DBG_CMD_NUM];
+ u16 last_cmd_act[DBG_CMD_NUM];
+ u16 last_cmd_index;
+ u16 last_cmd_resp_id[DBG_CMD_NUM];
+ u16 last_cmd_resp_index;
+ u16 last_event[DBG_CMD_NUM];
+ u16 last_event_index;
+ u8 data_sent;
+ u8 cmd_sent;
+ u8 cmd_resp_received;
+ u8 event_received;
+};
+
+#define MWIFIEX_KEY_INDEX_UNICAST 0x40000000
+#define WAPI_RXPN_LEN 16
+
+struct mwifiex_ds_encrypt_key {
+ u32 key_disable;
+ u32 key_index;
+ u32 key_len;
+ u8 key_material[WLAN_MAX_KEY_LEN];
+ u8 mac_addr[ETH_ALEN];
+ u32 is_wapi_key;
+ u8 wapi_rxpn[WAPI_RXPN_LEN];
+};
+
+struct mwifiex_rate_cfg {
+ u32 action;
+ u32 is_rate_auto;
+ u32 rate;
+};
+
+struct mwifiex_power_cfg {
+ u32 is_power_auto;
+ u32 power_level;
+};
+
+struct mwifiex_ds_hs_cfg {
+ u32 is_invoke_hostcmd;
+ /* Bit0: non-unicast data
+ * Bit1: unicast data
+ * Bit2: mac events
+ * Bit3: magic packet
+ */
+ u32 conditions;
+ u32 gpio;
+ u32 gap;
+};
+
+#define DEEP_SLEEP_ON 1
+#define DEEP_SLEEP_IDLE_TIME 100
+#define PS_MODE_AUTO 1
+
+struct mwifiex_ds_auto_ds {
+ u16 auto_ds;
+ u16 idle_time;
+};
+
+struct mwifiex_ds_pm_cfg {
+ union {
+ u32 ps_mode;
+ struct mwifiex_ds_hs_cfg hs_cfg;
+ struct mwifiex_ds_auto_ds auto_deep_sleep;
+ u32 sleep_period;
+ } param;
+};
+
+struct mwifiex_ds_11n_tx_cfg {
+ u16 tx_htcap;
+ u16 tx_htinfo;
+};
+
+struct mwifiex_ds_11n_amsdu_aggr_ctrl {
+ u16 enable;
+ u16 curr_buf_size;
+};
+
+#define MWIFIEX_NUM_OF_CMD_BUFFER 20
+#define MWIFIEX_SIZE_OF_CMD_BUFFER 2048
+
+enum {
+ MWIFIEX_IE_TYPE_GEN_IE = 0,
+ MWIFIEX_IE_TYPE_ARP_FILTER,
+};
+
+enum {
+ MWIFIEX_REG_MAC = 1,
+ MWIFIEX_REG_BBP,
+ MWIFIEX_REG_RF,
+ MWIFIEX_REG_PMIC,
+ MWIFIEX_REG_CAU,
+};
+
+struct mwifiex_ds_reg_rw {
+ __le32 type;
+ __le32 offset;
+ __le32 value;
+};
+
+#define MAX_EEPROM_DATA 256
+
+struct mwifiex_ds_read_eeprom {
+ __le16 offset;
+ __le16 byte_count;
+ u8 value[MAX_EEPROM_DATA];
+};
+
+struct mwifiex_ds_misc_gen_ie {
+ u32 type;
+ u32 len;
+ u8 ie_data[IW_CUSTOM_MAX];
+};
+
+struct mwifiex_ds_misc_cmd {
+ u32 len;
+ u8 cmd[MWIFIEX_SIZE_OF_CMD_BUFFER];
+};
+
+#define MWIFIEX_MAX_VSIE_LEN (256)
+#define MWIFIEX_MAX_VSIE_NUM (8)
+#define MWIFIEX_VSIE_MASK_SCAN 0x01
+#define MWIFIEX_VSIE_MASK_ASSOC 0x02
+#define MWIFIEX_VSIE_MASK_ADHOC 0x04
+
+enum {
+ MWIFIEX_FUNC_INIT = 1,
+ MWIFIEX_FUNC_SHUTDOWN,
+};
+
+#endif /* !_MWIFIEX_IOCTL_H_ */
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
new file mode 100644
index 0000000..5eab3dc
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -0,0 +1,1423 @@
+/*
+ * Marvell Wireless LAN device driver: association and ad-hoc start/join
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+#define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9)))
+
+/*
+ * Append a generic IE as a pass through TLV to a TLV buffer.
+ *
+ * This function is called from the network join command preparation routine.
+ *
+ * If the IE buffer has been setup by the application, this routine appends
+ * the buffer as a pass through TLV type to the request.
+ */
+static int
+mwifiex_cmd_append_generic_ie(struct mwifiex_private *priv, u8 **buffer)
+{
+ int ret_len = 0;
+ struct mwifiex_ie_types_header ie_header;
+
+ /* Null Checks */
+ if (!buffer)
+ return 0;
+ if (!(*buffer))
+ return 0;
+
+ /*
+ * If there is a generic ie buffer setup, append it to the return
+ * parameter buffer pointer.
+ */
+ if (priv->gen_ie_buf_len) {
+ dev_dbg(priv->adapter->dev, "info: %s: append generic %d to %p\n",
+ __func__, priv->gen_ie_buf_len, *buffer);
+
+ /* Wrap the generic IE buffer with a pass through TLV type */
+ ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH);
+ ie_header.len = cpu_to_le16(priv->gen_ie_buf_len);
+ memcpy(*buffer, &ie_header, sizeof(ie_header));
+
+ /* Increment the return size and the return buffer pointer
+ param */
+ *buffer += sizeof(ie_header);
+ ret_len += sizeof(ie_header);
+
+ /* Copy the generic IE buffer to the output buffer, advance
+ pointer */
+ memcpy(*buffer, priv->gen_ie_buf, priv->gen_ie_buf_len);
+
+ /* Increment the return size and the return buffer pointer
+ param */
+ *buffer += priv->gen_ie_buf_len;
+ ret_len += priv->gen_ie_buf_len;
+
+ /* Reset the generic IE buffer */
+ priv->gen_ie_buf_len = 0;
+ }
+
+ /* return the length appended to the buffer */
+ return ret_len;
+}
+
+/*
+ * Append TSF tracking info from the scan table for the target AP.
+ *
+ * This function is called from the network join command preparation routine.
+ *
+ * The TSF table TSF sent to the firmware contains two TSF values:
+ * - The TSF of the target AP from its previous beacon/probe response
+ * - The TSF timestamp of our local MAC at the time we observed the
+ * beacon/probe response.
+ *
+ * The firmware uses the timestamp values to set an initial TSF value
+ * in the MAC for the new association after a reassociation attempt.
+ */
+static int
+mwifiex_cmd_append_tsf_tlv(struct mwifiex_private *priv, u8 **buffer,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ struct mwifiex_ie_types_tsf_timestamp tsf_tlv;
+ __le64 tsf_val;
+
+ /* Null Checks */
+ if (buffer == NULL)
+ return 0;
+ if (*buffer == NULL)
+ return 0;
+
+ memset(&tsf_tlv, 0x00, sizeof(struct mwifiex_ie_types_tsf_timestamp));
+
+ tsf_tlv.header.type = cpu_to_le16(TLV_TYPE_TSFTIMESTAMP);
+ tsf_tlv.header.len = cpu_to_le16(2 * sizeof(tsf_val));
+
+ memcpy(*buffer, &tsf_tlv, sizeof(tsf_tlv.header));
+ *buffer += sizeof(tsf_tlv.header);
+
+ /* TSF at the time when beacon/probe_response was received */
+ tsf_val = cpu_to_le64(bss_desc->network_tsf);
+ memcpy(*buffer, &tsf_val, sizeof(tsf_val));
+ *buffer += sizeof(tsf_val);
+
+ memcpy(&tsf_val, bss_desc->time_stamp, sizeof(tsf_val));
+
+ dev_dbg(priv->adapter->dev, "info: %s: TSF offset calc: %016llx - "
+ "%016llx\n", __func__, tsf_val, bss_desc->network_tsf);
+
+ memcpy(*buffer, &tsf_val, sizeof(tsf_val));
+ *buffer += sizeof(tsf_val);
+
+ return sizeof(tsf_tlv.header) + (2 * sizeof(tsf_val));
+}
+
+/*
+ * This function finds out the common rates between rate1 and rate2.
+ *
+ * It will fill common rates in rate1 as output if found.
+ *
+ * NOTE: Setting the MSB of the basic rates needs to be taken
+ * care of, either before or after calling this function.
+ */
+static int mwifiex_get_common_rates(struct mwifiex_private *priv, u8 *rate1,
+ u32 rate1_size, u8 *rate2, u32 rate2_size)
+{
+ int ret;
+ u8 *ptr = rate1, *tmp;
+ u32 i, j;
+
+ tmp = kmalloc(rate1_size, GFP_KERNEL);
+ if (!tmp) {
+ dev_err(priv->adapter->dev, "failed to alloc tmp buf\n");
+ return -ENOMEM;
+ }
+
+ memcpy(tmp, rate1, rate1_size);
+ memset(rate1, 0, rate1_size);
+
+ for (i = 0; rate2[i] && i < rate2_size; i++) {
+ for (j = 0; tmp[j] && j < rate1_size; j++) {
+ /* Check common rate, excluding the bit for
+ basic rate */
+ if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) {
+ *rate1++ = tmp[j];
+ break;
+ }
+ }
+ }
+
+ dev_dbg(priv->adapter->dev, "info: Tx data rate set to %#x\n",
+ priv->data_rate);
+
+ if (!priv->is_data_rate_auto) {
+ while (*ptr) {
+ if ((*ptr & 0x7f) == priv->data_rate) {
+ ret = 0;
+ goto done;
+ }
+ ptr++;
+ }
+ dev_err(priv->adapter->dev, "previously set fixed data rate %#x"
+ " is not compatible with the network\n",
+ priv->data_rate);
+
+ ret = -1;
+ goto done;
+ }
+
+ ret = 0;
+done:
+ kfree(tmp);
+ return ret;
+}
+
+/*
+ * This function creates the intersection of the rates supported by a
+ * target BSS and our adapter settings for use in an assoc/join command.
+ */
+static int
+mwifiex_setup_rates_from_bssdesc(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc,
+ u8 *out_rates, u32 *out_rates_size)
+{
+ u8 card_rates[MWIFIEX_SUPPORTED_RATES];
+ u32 card_rates_size;
+
+ /* Copy AP supported rates */
+ memcpy(out_rates, bss_desc->supported_rates, MWIFIEX_SUPPORTED_RATES);
+ /* Get the STA supported rates */
+ card_rates_size = mwifiex_get_active_data_rates(priv, card_rates);
+ /* Get the common rates between AP and STA supported rates */
+ if (mwifiex_get_common_rates(priv, out_rates, MWIFIEX_SUPPORTED_RATES,
+ card_rates, card_rates_size)) {
+ *out_rates_size = 0;
+ dev_err(priv->adapter->dev, "%s: cannot get common rates\n",
+ __func__);
+ return -1;
+ }
+
+ *out_rates_size =
+ min_t(size_t, strlen(out_rates), MWIFIEX_SUPPORTED_RATES);
+
+ return 0;
+}
+
+/*
+ * This function updates the scan entry TSF timestamps to reflect
+ * a new association.
+ */
+static void
+mwifiex_update_tsf_timestamps(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *new_bss_desc)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u32 table_idx;
+ long long new_tsf_base;
+ signed long long tsf_delta;
+
+ memcpy(&new_tsf_base, new_bss_desc->time_stamp, sizeof(new_tsf_base));
+
+ tsf_delta = new_tsf_base - new_bss_desc->network_tsf;
+
+ dev_dbg(adapter->dev, "info: TSF: update TSF timestamps, "
+ "0x%016llx -> 0x%016llx\n",
+ new_bss_desc->network_tsf, new_tsf_base);
+
+ for (table_idx = 0; table_idx < adapter->num_in_scan_table;
+ table_idx++)
+ adapter->scan_table[table_idx].network_tsf += tsf_delta;
+}
+
+/*
+ * This function appends a WAPI IE.
+ *
+ * This function is called from the network join command preparation routine.
+ *
+ * If the IE buffer has been setup by the application, this routine appends
+ * the buffer as a WAPI TLV type to the request.
+ */
+static int
+mwifiex_cmd_append_wapi_ie(struct mwifiex_private *priv, u8 **buffer)
+{
+ int retLen = 0;
+ struct mwifiex_ie_types_header ie_header;
+
+ /* Null Checks */
+ if (buffer == NULL)
+ return 0;
+ if (*buffer == NULL)
+ return 0;
+
+ /*
+ * If there is a wapi ie buffer setup, append it to the return
+ * parameter buffer pointer.
+ */
+ if (priv->wapi_ie_len) {
+ dev_dbg(priv->adapter->dev, "cmd: append wapi ie %d to %p\n",
+ priv->wapi_ie_len, *buffer);
+
+ /* Wrap the generic IE buffer with a pass through TLV type */
+ ie_header.type = cpu_to_le16(TLV_TYPE_WAPI_IE);
+ ie_header.len = cpu_to_le16(priv->wapi_ie_len);
+ memcpy(*buffer, &ie_header, sizeof(ie_header));
+
+ /* Increment the return size and the return buffer pointer
+ param */
+ *buffer += sizeof(ie_header);
+ retLen += sizeof(ie_header);
+
+ /* Copy the wapi IE buffer to the output buffer, advance
+ pointer */
+ memcpy(*buffer, priv->wapi_ie, priv->wapi_ie_len);
+
+ /* Increment the return size and the return buffer pointer
+ param */
+ *buffer += priv->wapi_ie_len;
+ retLen += priv->wapi_ie_len;
+
+ }
+ /* return the length appended to the buffer */
+ return retLen;
+}
+
+/*
+ * This function appends rsn ie tlv for wpa/wpa2 security modes.
+ * It is called from the network join command preparation routine.
+ */
+static int mwifiex_append_rsn_ie_wpa_wpa2(struct mwifiex_private *priv,
+ u8 **buffer)
+{
+ struct mwifiex_ie_types_rsn_param_set *rsn_ie_tlv;
+ int rsn_ie_len;
+
+ if (!buffer || !(*buffer))
+ return 0;
+
+ rsn_ie_tlv = (struct mwifiex_ie_types_rsn_param_set *) (*buffer);
+ rsn_ie_tlv->header.type = cpu_to_le16((u16) priv->wpa_ie[0]);
+ rsn_ie_tlv->header.type = cpu_to_le16(
+ le16_to_cpu(rsn_ie_tlv->header.type) & 0x00FF);
+ rsn_ie_tlv->header.len = cpu_to_le16((u16) priv->wpa_ie[1]);
+ rsn_ie_tlv->header.len = cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.len)
+ & 0x00FF);
+ if (le16_to_cpu(rsn_ie_tlv->header.len) <= (sizeof(priv->wpa_ie) - 2))
+ memcpy(rsn_ie_tlv->rsn_ie, &priv->wpa_ie[2],
+ le16_to_cpu(rsn_ie_tlv->header.len));
+ else
+ return -1;
+
+ rsn_ie_len = sizeof(rsn_ie_tlv->header) +
+ le16_to_cpu(rsn_ie_tlv->header.len);
+ *buffer += rsn_ie_len;
+
+ return rsn_ie_len;
+}
+
+/*
+ * This function prepares command for association.
+ *
+ * This sets the following parameters -
+ * - Peer MAC address
+ * - Listen interval
+ * - Beacon interval
+ * - Capability information
+ *
+ * ...and the following TLVs, as required -
+ * - SSID TLV
+ * - PHY TLV
+ * - SS TLV
+ * - Rates TLV
+ * - Authentication TLV
+ * - Channel TLV
+ * - WPA/WPA2 IE
+ * - 11n TLV
+ * - Vendor specific TLV
+ * - WMM TLV
+ * - WAPI IE
+ * - Generic IE
+ * - TSF TLV
+ *
+ * Preparation also includes -
+ * - Setting command ID and proper size
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_associate *assoc = &cmd->params.associate;
+ struct mwifiex_bssdescriptor *bss_desc;
+ struct mwifiex_ie_types_ssid_param_set *ssid_tlv;
+ struct mwifiex_ie_types_phy_param_set *phy_tlv;
+ struct mwifiex_ie_types_ss_param_set *ss_tlv;
+ struct mwifiex_ie_types_rates_param_set *rates_tlv;
+ struct mwifiex_ie_types_auth_type *auth_tlv;
+ struct mwifiex_ie_types_chan_list_param_set *chan_tlv;
+ u8 rates[MWIFIEX_SUPPORTED_RATES];
+ u32 rates_size;
+ u16 tmp_cap;
+ u8 *pos;
+ int rsn_ie_len = 0;
+
+ bss_desc = (struct mwifiex_bssdescriptor *) data_buf;
+ pos = (u8 *) assoc;
+
+ mwifiex_cfg_tx_buf(priv, bss_desc);
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_ASSOCIATE);
+
+ /* Save so we know which BSS Desc to use in the response handler */
+ priv->attempted_bss_desc = bss_desc;
+
+ memcpy(assoc->peer_sta_addr,
+ bss_desc->mac_address, sizeof(assoc->peer_sta_addr));
+ pos += sizeof(assoc->peer_sta_addr);
+
+ /* Set the listen interval */
+ assoc->listen_interval = cpu_to_le16(priv->listen_interval);
+ /* Set the beacon period */
+ assoc->beacon_period = cpu_to_le16(bss_desc->beacon_period);
+
+ pos += sizeof(assoc->cap_info_bitmap);
+ pos += sizeof(assoc->listen_interval);
+ pos += sizeof(assoc->beacon_period);
+ pos += sizeof(assoc->dtim_period);
+
+ ssid_tlv = (struct mwifiex_ie_types_ssid_param_set *) pos;
+ ssid_tlv->header.type = cpu_to_le16(WLAN_EID_SSID);
+ ssid_tlv->header.len = cpu_to_le16((u16) bss_desc->ssid.ssid_len);
+ memcpy(ssid_tlv->ssid, bss_desc->ssid.ssid,
+ le16_to_cpu(ssid_tlv->header.len));
+ pos += sizeof(ssid_tlv->header) + le16_to_cpu(ssid_tlv->header.len);
+
+ phy_tlv = (struct mwifiex_ie_types_phy_param_set *) pos;
+ phy_tlv->header.type = cpu_to_le16(WLAN_EID_DS_PARAMS);
+ phy_tlv->header.len = cpu_to_le16(sizeof(phy_tlv->fh_ds.ds_param_set));
+ memcpy(&phy_tlv->fh_ds.ds_param_set,
+ &bss_desc->phy_param_set.ds_param_set.current_chan,
+ sizeof(phy_tlv->fh_ds.ds_param_set));
+ pos += sizeof(phy_tlv->header) + le16_to_cpu(phy_tlv->header.len);
+
+ ss_tlv = (struct mwifiex_ie_types_ss_param_set *) pos;
+ ss_tlv->header.type = cpu_to_le16(WLAN_EID_CF_PARAMS);
+ ss_tlv->header.len = cpu_to_le16(sizeof(ss_tlv->cf_ibss.cf_param_set));
+ pos += sizeof(ss_tlv->header) + le16_to_cpu(ss_tlv->header.len);
+
+ /* Get the common rates supported between the driver and the BSS Desc */
+ if (mwifiex_setup_rates_from_bssdesc
+ (priv, bss_desc, rates, &rates_size))
+ return -1;
+
+ /* Save the data rates into Current BSS state structure */
+ priv->curr_bss_params.num_of_rates = rates_size;
+ memcpy(&priv->curr_bss_params.data_rates, rates, rates_size);
+
+ /* Setup the Rates TLV in the association command */
+ rates_tlv = (struct mwifiex_ie_types_rates_param_set *) pos;
+ rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES);
+ rates_tlv->header.len = cpu_to_le16((u16) rates_size);
+ memcpy(rates_tlv->rates, rates, rates_size);
+ pos += sizeof(rates_tlv->header) + rates_size;
+ dev_dbg(priv->adapter->dev, "info: ASSOC_CMD: rates size = %d\n",
+ rates_size);
+
+ /* Add the Authentication type to be used for Auth frames */
+ auth_tlv = (struct mwifiex_ie_types_auth_type *) pos;
+ auth_tlv->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
+ auth_tlv->header.len = cpu_to_le16(sizeof(auth_tlv->auth_type));
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
+ auth_tlv->auth_type = cpu_to_le16(
+ (u16) priv->sec_info.authentication_mode);
+ else
+ auth_tlv->auth_type = cpu_to_le16(NL80211_AUTHTYPE_OPEN_SYSTEM);
+
+ pos += sizeof(auth_tlv->header) + le16_to_cpu(auth_tlv->header.len);
+
+ if (IS_SUPPORT_MULTI_BANDS(priv->adapter)
+ && !(ISSUPP_11NENABLED(priv->adapter->fw_cap_info)
+ && (!bss_desc->disable_11n)
+ && (priv->adapter->config_bands & BAND_GN
+ || priv->adapter->config_bands & BAND_AN)
+ && (bss_desc->bcn_ht_cap)
+ )
+ ) {
+ /* Append a channel TLV for the channel the attempted AP was
+ found on */
+ chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos;
+ chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
+ chan_tlv->header.len =
+ cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set));
+
+ memset(chan_tlv->chan_scan_param, 0x00,
+ sizeof(struct mwifiex_chan_scan_param_set));
+ chan_tlv->chan_scan_param[0].chan_number =
+ (bss_desc->phy_param_set.ds_param_set.current_chan);
+ dev_dbg(priv->adapter->dev, "info: Assoc: TLV Chan = %d\n",
+ chan_tlv->chan_scan_param[0].chan_number);
+
+ chan_tlv->chan_scan_param[0].radio_type =
+ mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
+
+ dev_dbg(priv->adapter->dev, "info: Assoc: TLV Band = %d\n",
+ chan_tlv->chan_scan_param[0].radio_type);
+ pos += sizeof(chan_tlv->header) +
+ sizeof(struct mwifiex_chan_scan_param_set);
+ }
+
+ if (!priv->wps.session_enable) {
+ if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
+ rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos);
+
+ if (rsn_ie_len == -1)
+ return -1;
+ }
+
+ if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info)
+ && (!bss_desc->disable_11n)
+ && (priv->adapter->config_bands & BAND_GN
+ || priv->adapter->config_bands & BAND_AN))
+ mwifiex_cmd_append_11n_tlv(priv, bss_desc, &pos);
+
+ /* Append vendor specific IE TLV */
+ mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_ASSOC, &pos);
+
+ mwifiex_wmm_process_association_req(priv, &pos, &bss_desc->wmm_ie,
+ bss_desc->bcn_ht_cap);
+ if (priv->sec_info.wapi_enabled && priv->wapi_ie_len)
+ mwifiex_cmd_append_wapi_ie(priv, &pos);
+
+
+ mwifiex_cmd_append_generic_ie(priv, &pos);
+
+ mwifiex_cmd_append_tsf_tlv(priv, &pos, bss_desc);
+
+ cmd->size = cpu_to_le16((u16) (pos - (u8 *) assoc) + S_DS_GEN);
+
+ /* Set the Capability info at last */
+ tmp_cap = bss_desc->cap_info_bitmap;
+
+ if (priv->adapter->config_bands == BAND_B)
+ tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME;
+
+ tmp_cap &= CAPINFO_MASK;
+ dev_dbg(priv->adapter->dev, "info: ASSOC_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n",
+ tmp_cap, CAPINFO_MASK);
+ assoc->cap_info_bitmap = cpu_to_le16(tmp_cap);
+
+ return 0;
+}
+
+/*
+ * Association firmware command response handler
+ *
+ * The response buffer for the association command has the following
+ * memory layout.
+ *
+ * For cases where an association response was not received (indicated
+ * by the CapInfo and AId field):
+ *
+ * .------------------------------------------------------------.
+ * | Header(4 * sizeof(t_u16)): Standard command response hdr |
+ * .------------------------------------------------------------.
+ * | cap_info/Error Return(t_u16): |
+ * | 0xFFFF(-1): Internal error |
+ * | 0xFFFE(-2): Authentication unhandled message |
+ * | 0xFFFD(-3): Authentication refused |
+ * | 0xFFFC(-4): Timeout waiting for AP response |
+ * .------------------------------------------------------------.
+ * | status_code(t_u16): |
+ * | If cap_info is -1: |
+ * | An internal firmware failure prevented the |
+ * | command from being processed. The status_code |
+ * | will be set to 1. |
+ * | |
+ * | If cap_info is -2: |
+ * | An authentication frame was received but was |
+ * | not handled by the firmware. IEEE Status |
+ * | code for the failure is returned. |
+ * | |
+ * | If cap_info is -3: |
+ * | An authentication frame was received and the |
+ * | status_code is the IEEE Status reported in the |
+ * | response. |
+ * | |
+ * | If cap_info is -4: |
+ * | (1) Association response timeout |
+ * | (2) Authentication response timeout |
+ * .------------------------------------------------------------.
+ * | a_id(t_u16): 0xFFFF |
+ * .------------------------------------------------------------.
+ *
+ *
+ * For cases where an association response was received, the IEEE
+ * standard association response frame is returned:
+ *
+ * .------------------------------------------------------------.
+ * | Header(4 * sizeof(t_u16)): Standard command response hdr |
+ * .------------------------------------------------------------.
+ * | cap_info(t_u16): IEEE Capability |
+ * .------------------------------------------------------------.
+ * | status_code(t_u16): IEEE Status Code |
+ * .------------------------------------------------------------.
+ * | a_id(t_u16): IEEE Association ID |
+ * .------------------------------------------------------------.
+ * | IEEE IEs(variable): Any received IEs comprising the |
+ * | remaining portion of a received |
+ * | association response frame. |
+ * .------------------------------------------------------------.
+ *
+ * For simplistic handling, the status_code field can be used to determine
+ * an association success (0) or failure (non-zero).
+ */
+int mwifiex_ret_802_11_associate(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int ret = 0;
+ struct ieee_types_assoc_rsp *assoc_rsp;
+ struct mwifiex_bssdescriptor *bss_desc;
+ u8 enable_data = true;
+
+ assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params;
+
+ priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN,
+ sizeof(priv->assoc_rsp_buf));
+
+ memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size);
+
+ if (le16_to_cpu(assoc_rsp->status_code)) {
+ priv->adapter->dbg.num_cmd_assoc_failure++;
+ dev_err(priv->adapter->dev, "ASSOC_RESP: association failed, "
+ "status code = %d, error = 0x%x, a_id = 0x%x\n",
+ le16_to_cpu(assoc_rsp->status_code),
+ le16_to_cpu(assoc_rsp->cap_info_bitmap),
+ le16_to_cpu(assoc_rsp->a_id));
+
+ ret = -1;
+ goto done;
+ }
+
+ /* Send a Media Connected event, according to the Spec */
+ priv->media_connected = true;
+
+ priv->adapter->ps_state = PS_STATE_AWAKE;
+ priv->adapter->pps_uapsd_mode = false;
+ priv->adapter->tx_lock_flag = false;
+
+ /* Set the attempted BSSID Index to current */
+ bss_desc = priv->attempted_bss_desc;
+
+ dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: %s\n",
+ bss_desc->ssid.ssid);
+
+ /* Make a copy of current BSSID descriptor */
+ memcpy(&priv->curr_bss_params.bss_descriptor,
+ bss_desc, sizeof(struct mwifiex_bssdescriptor));
+
+ /* Update curr_bss_params */
+ priv->curr_bss_params.bss_descriptor.channel
+ = bss_desc->phy_param_set.ds_param_set.current_chan;
+
+ priv->curr_bss_params.band = (u8) bss_desc->bss_band;
+
+ /*
+ * Adjust the timestamps in the scan table to be relative to the newly
+ * associated AP's TSF
+ */
+ mwifiex_update_tsf_timestamps(priv, bss_desc);
+
+ if (bss_desc->wmm_ie.vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC)
+ priv->curr_bss_params.wmm_enabled = true;
+ else
+ priv->curr_bss_params.wmm_enabled = false;
+
+ if ((priv->wmm_required || bss_desc->bcn_ht_cap)
+ && priv->curr_bss_params.wmm_enabled)
+ priv->wmm_enabled = true;
+ else
+ priv->wmm_enabled = false;
+
+ priv->curr_bss_params.wmm_uapsd_enabled = false;
+
+ if (priv->wmm_enabled)
+ priv->curr_bss_params.wmm_uapsd_enabled
+ = ((bss_desc->wmm_ie.qos_info_bitmap &
+ IEEE80211_WMM_IE_AP_QOSINFO_UAPSD) ? 1 : 0);
+
+ dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: curr_pkt_filter is %#x\n",
+ priv->curr_pkt_filter);
+ if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
+ priv->wpa_is_gtk_set = false;
+
+ if (priv->wmm_enabled) {
+ /* Don't re-enable carrier until we get the WMM_GET_STATUS
+ event */
+ enable_data = false;
+ } else {
+ /* Since WMM is not enabled, setup the queues with the
+ defaults */
+ mwifiex_wmm_setup_queue_priorities(priv, NULL);
+ mwifiex_wmm_setup_ac_downgrade(priv);
+ }
+
+ if (enable_data)
+ dev_dbg(priv->adapter->dev,
+ "info: post association, re-enabling data flow\n");
+
+ /* Reset SNR/NF/RSSI values */
+ priv->data_rssi_last = 0;
+ priv->data_nf_last = 0;
+ priv->data_rssi_avg = 0;
+ priv->data_nf_avg = 0;
+ priv->bcn_rssi_last = 0;
+ priv->bcn_nf_last = 0;
+ priv->bcn_rssi_avg = 0;
+ priv->bcn_nf_avg = 0;
+ priv->rxpd_rate = 0;
+ priv->rxpd_htinfo = 0;
+
+ mwifiex_save_curr_bcn(priv);
+
+ priv->adapter->dbg.num_cmd_assoc_success++;
+
+ dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: associated\n");
+
+ /* Add the ra_list here for infra mode as there will be only 1 ra
+ always */
+ mwifiex_ralist_add(priv,
+ priv->curr_bss_params.bss_descriptor.mac_address);
+
+ if (!netif_carrier_ok(priv->netdev))
+ netif_carrier_on(priv->netdev);
+ if (netif_queue_stopped(priv->netdev))
+ netif_wake_queue(priv->netdev);
+
+ if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
+ priv->scan_block = true;
+
+done:
+ /* Need to indicate IOCTL complete */
+ if (adapter->curr_cmd->wait_q_enabled) {
+ if (ret)
+ adapter->cmd_wait_q.status = -1;
+ else
+ adapter->cmd_wait_q.status = 0;
+ }
+
+ return ret;
+}
+
+/*
+ * This function prepares command for ad-hoc start.
+ *
+ * Driver will fill up SSID, BSS mode, IBSS parameters, physical
+ * parameters, probe delay, and capability information. Firmware
+ * will fill up beacon period, basic rates and operational rates.
+ *
+ * In addition, the following TLVs are added -
+ * - Channel TLV
+ * - Vendor specific IE
+ * - WPA/WPA2 IE
+ * - HT Capabilities IE
+ * - HT Information IE
+ *
+ * Preparation also includes -
+ * - Setting command ID and proper size
+ * - Ensuring correct endian-ness
+ */
+int
+mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd, void *data_buf)
+{
+ int rsn_ie_len = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11_ad_hoc_start *adhoc_start =
+ &cmd->params.adhoc_start;
+ struct mwifiex_bssdescriptor *bss_desc;
+ u32 cmd_append_size = 0;
+ u32 i;
+ u16 tmp_cap;
+ uint16_t ht_cap_info;
+ struct mwifiex_ie_types_chan_list_param_set *chan_tlv;
+
+ struct mwifiex_ie_types_htcap *ht_cap;
+ struct mwifiex_ie_types_htinfo *ht_info;
+ u8 *pos = (u8 *) adhoc_start +
+ sizeof(struct host_cmd_ds_802_11_ad_hoc_start);
+
+ if (!adapter)
+ return -1;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_START);
+
+ bss_desc = &priv->curr_bss_params.bss_descriptor;
+ priv->attempted_bss_desc = bss_desc;
+
+ /*
+ * Fill in the parameters for 2 data structures:
+ * 1. struct host_cmd_ds_802_11_ad_hoc_start command
+ * 2. bss_desc
+ * Driver will fill up SSID, bss_mode,IBSS param, Physical Param,
+ * probe delay, and Cap info.
+ * Firmware will fill up beacon period, Basic rates
+ * and operational rates.
+ */
+
+ memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN);
+
+ memcpy(adhoc_start->ssid,
+ ((struct mwifiex_802_11_ssid *) data_buf)->ssid,
+ ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len);
+
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: SSID = %s\n",
+ adhoc_start->ssid);
+
+ memset(bss_desc->ssid.ssid, 0, IEEE80211_MAX_SSID_LEN);
+ memcpy(bss_desc->ssid.ssid,
+ ((struct mwifiex_802_11_ssid *) data_buf)->ssid,
+ ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len);
+
+ bss_desc->ssid.ssid_len =
+ ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len;
+
+ /* Set the BSS mode */
+ adhoc_start->bss_mode = HostCmd_BSS_MODE_IBSS;
+ bss_desc->bss_mode = NL80211_IFTYPE_ADHOC;
+ adhoc_start->beacon_period = cpu_to_le16(priv->beacon_period);
+ bss_desc->beacon_period = priv->beacon_period;
+
+ /* Set Physical param set */
+/* Parameter IE Id */
+#define DS_PARA_IE_ID 3
+/* Parameter IE length */
+#define DS_PARA_IE_LEN 1
+
+ adhoc_start->phy_param_set.ds_param_set.element_id = DS_PARA_IE_ID;
+ adhoc_start->phy_param_set.ds_param_set.len = DS_PARA_IE_LEN;
+
+ if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv, adapter->adhoc_start_band, (u16)
+ priv->adhoc_channel)) {
+ struct mwifiex_chan_freq_power *cfp;
+ cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv,
+ adapter->adhoc_start_band, FIRST_VALID_CHANNEL);
+ if (cfp)
+ priv->adhoc_channel = (u8) cfp->channel;
+ }
+
+ if (!priv->adhoc_channel) {
+ dev_err(adapter->dev, "ADHOC_S_CMD: adhoc_channel cannot be 0\n");
+ return -1;
+ }
+
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: creating ADHOC on channel %d\n",
+ priv->adhoc_channel);
+
+ priv->curr_bss_params.bss_descriptor.channel = priv->adhoc_channel;
+ priv->curr_bss_params.band = adapter->adhoc_start_band;
+
+ bss_desc->channel = priv->adhoc_channel;
+ adhoc_start->phy_param_set.ds_param_set.current_chan =
+ priv->adhoc_channel;
+
+ memcpy(&bss_desc->phy_param_set, &adhoc_start->phy_param_set,
+ sizeof(union ieee_types_phy_param_set));
+
+ /* Set IBSS param set */
+/* IBSS parameter IE Id */
+#define IBSS_PARA_IE_ID 6
+/* IBSS parameter IE length */
+#define IBSS_PARA_IE_LEN 2
+
+ adhoc_start->ss_param_set.ibss_param_set.element_id = IBSS_PARA_IE_ID;
+ adhoc_start->ss_param_set.ibss_param_set.len = IBSS_PARA_IE_LEN;
+ adhoc_start->ss_param_set.ibss_param_set.atim_window
+ = cpu_to_le16(priv->atim_window);
+ memcpy(&bss_desc->ss_param_set, &adhoc_start->ss_param_set,
+ sizeof(union ieee_types_ss_param_set));
+
+ /* Set Capability info */
+ bss_desc->cap_info_bitmap |= WLAN_CAPABILITY_IBSS;
+ tmp_cap = le16_to_cpu(adhoc_start->cap_info_bitmap);
+ tmp_cap &= ~WLAN_CAPABILITY_ESS;
+ tmp_cap |= WLAN_CAPABILITY_IBSS;
+
+ /* Set up privacy in bss_desc */
+ if (priv->sec_info.encryption_mode) {
+ /* Ad-Hoc capability privacy on */
+ dev_dbg(adapter->dev,
+ "info: ADHOC_S_CMD: wep_status set privacy to WEP\n");
+ bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP;
+ tmp_cap |= WLAN_CAPABILITY_PRIVACY;
+ } else {
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: wep_status NOT set,"
+ " setting privacy to ACCEPT ALL\n");
+ bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL;
+ }
+
+ memset(adhoc_start->DataRate, 0, sizeof(adhoc_start->DataRate));
+ mwifiex_get_active_data_rates(priv, adhoc_start->DataRate);
+ if ((adapter->adhoc_start_band & BAND_G) &&
+ (priv->curr_pkt_filter & HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON)) {
+ if (mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
+ HostCmd_ACT_GEN_SET, 0,
+ &priv->curr_pkt_filter)) {
+ dev_err(adapter->dev,
+ "ADHOC_S_CMD: G Protection config failed\n");
+ return -1;
+ }
+ }
+ /* Find the last non zero */
+ for (i = 0; i < sizeof(adhoc_start->DataRate) &&
+ adhoc_start->DataRate[i];
+ i++)
+ ;
+
+ priv->curr_bss_params.num_of_rates = i;
+
+ /* Copy the ad-hoc creating rates into Current BSS rate structure */
+ memcpy(&priv->curr_bss_params.data_rates,
+ &adhoc_start->DataRate, priv->curr_bss_params.num_of_rates);
+
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: rates=%02x %02x %02x %02x\n",
+ adhoc_start->DataRate[0], adhoc_start->DataRate[1],
+ adhoc_start->DataRate[2], adhoc_start->DataRate[3]);
+
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: AD-HOC Start command is ready\n");
+
+ if (IS_SUPPORT_MULTI_BANDS(adapter)) {
+ /* Append a channel TLV */
+ chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos;
+ chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
+ chan_tlv->header.len =
+ cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set));
+
+ memset(chan_tlv->chan_scan_param, 0x00,
+ sizeof(struct mwifiex_chan_scan_param_set));
+ chan_tlv->chan_scan_param[0].chan_number =
+ (u8) priv->curr_bss_params.bss_descriptor.channel;
+
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Chan = %d\n",
+ chan_tlv->chan_scan_param[0].chan_number);
+
+ chan_tlv->chan_scan_param[0].radio_type
+ = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
+ if (adapter->adhoc_start_band & BAND_GN
+ || adapter->adhoc_start_band & BAND_AN) {
+ if (adapter->chan_offset == SEC_CHANNEL_ABOVE)
+ chan_tlv->chan_scan_param[0].radio_type |=
+ SECOND_CHANNEL_ABOVE;
+ else if (adapter->chan_offset == SEC_CHANNEL_BELOW)
+ chan_tlv->chan_scan_param[0].radio_type |=
+ SECOND_CHANNEL_BELOW;
+ }
+ dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Band = %d\n",
+ chan_tlv->chan_scan_param[0].radio_type);
+ pos += sizeof(chan_tlv->header) +
+ sizeof(struct mwifiex_chan_scan_param_set);
+ cmd_append_size +=
+ sizeof(chan_tlv->header) +
+ sizeof(struct mwifiex_chan_scan_param_set);
+ }
+
+ /* Append vendor specific IE TLV */
+ cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv,
+ MWIFIEX_VSIE_MASK_ADHOC, &pos);
+
+ if (priv->sec_info.wpa_enabled) {
+ rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos);
+ if (rsn_ie_len == -1)
+ return -1;
+ cmd_append_size += rsn_ie_len;
+ }
+
+ if (adapter->adhoc_11n_enabled) {
+ {
+ ht_cap = (struct mwifiex_ie_types_htcap *) pos;
+ memset(ht_cap, 0,
+ sizeof(struct mwifiex_ie_types_htcap));
+ ht_cap->header.type =
+ cpu_to_le16(WLAN_EID_HT_CAPABILITY);
+ ht_cap->header.len =
+ cpu_to_le16(sizeof(struct ieee80211_ht_cap));
+ ht_cap_info = le16_to_cpu(ht_cap->ht_cap.cap_info);
+
+ ht_cap_info |= IEEE80211_HT_CAP_SGI_20;
+ if (adapter->chan_offset) {
+ ht_cap_info |= IEEE80211_HT_CAP_SGI_40;
+ ht_cap_info |= IEEE80211_HT_CAP_DSSSCCK40;
+ ht_cap_info |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask);
+ }
+
+ ht_cap->ht_cap.ampdu_params_info
+ = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_cap->ht_cap.mcs.rx_mask[0] = 0xff;
+ pos += sizeof(struct mwifiex_ie_types_htcap);
+ cmd_append_size +=
+ sizeof(struct mwifiex_ie_types_htcap);
+ }
+ {
+ ht_info = (struct mwifiex_ie_types_htinfo *) pos;
+ memset(ht_info, 0,
+ sizeof(struct mwifiex_ie_types_htinfo));
+ ht_info->header.type =
+ cpu_to_le16(WLAN_EID_HT_INFORMATION);
+ ht_info->header.len =
+ cpu_to_le16(sizeof(struct ieee80211_ht_info));
+ ht_info->ht_info.control_chan =
+ (u8) priv->curr_bss_params.bss_descriptor.
+ channel;
+ if (adapter->chan_offset) {
+ ht_info->ht_info.ht_param =
+ adapter->chan_offset;
+ ht_info->ht_info.ht_param |=
+ IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
+ }
+ ht_info->ht_info.operation_mode =
+ cpu_to_le16(IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+ ht_info->ht_info.basic_set[0] = 0xff;
+ pos += sizeof(struct mwifiex_ie_types_htinfo);
+ cmd_append_size +=
+ sizeof(struct mwifiex_ie_types_htinfo);
+ }
+ }
+
+ cmd->size = cpu_to_le16((u16)
+ (sizeof(struct host_cmd_ds_802_11_ad_hoc_start)
+ + S_DS_GEN + cmd_append_size));
+
+ if (adapter->adhoc_start_band == BAND_B)
+ tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME;
+ else
+ tmp_cap |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
+
+ adhoc_start->cap_info_bitmap = cpu_to_le16(tmp_cap);
+
+ return 0;
+}
+
+/*
+ * This function prepares command for ad-hoc join.
+ *
+ * Most of the parameters are set up by copying from the target BSS descriptor
+ * from the scan response.
+ *
+ * In addition, the following TLVs are added -
+ * - Channel TLV
+ * - Vendor specific IE
+ * - WPA/WPA2 IE
+ * - 11n IE
+ *
+ * Preparation also includes -
+ * - Setting command ID and proper size
+ * - Ensuring correct endian-ness
+ */
+int
+mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd, void *data_buf)
+{
+ int rsn_ie_len = 0;
+ struct host_cmd_ds_802_11_ad_hoc_join *adhoc_join =
+ &cmd->params.adhoc_join;
+ struct mwifiex_bssdescriptor *bss_desc =
+ (struct mwifiex_bssdescriptor *) data_buf;
+ struct mwifiex_ie_types_chan_list_param_set *chan_tlv;
+ u32 cmd_append_size = 0;
+ u16 tmp_cap;
+ u32 i, rates_size = 0;
+ u16 curr_pkt_filter;
+ u8 *pos =
+ (u8 *) adhoc_join +
+ sizeof(struct host_cmd_ds_802_11_ad_hoc_join);
+
+/* Use G protection */
+#define USE_G_PROTECTION 0x02
+ if (bss_desc->erp_flags & USE_G_PROTECTION) {
+ curr_pkt_filter =
+ priv->
+ curr_pkt_filter | HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON;
+
+ if (mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
+ HostCmd_ACT_GEN_SET, 0,
+ &curr_pkt_filter)) {
+ dev_err(priv->adapter->dev,
+ "ADHOC_J_CMD: G Protection config failed\n");
+ return -1;
+ }
+ }
+
+ priv->attempted_bss_desc = bss_desc;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_JOIN);
+
+ adhoc_join->bss_descriptor.bss_mode = HostCmd_BSS_MODE_IBSS;
+
+ adhoc_join->bss_descriptor.beacon_period
+ = cpu_to_le16(bss_desc->beacon_period);
+
+ memcpy(&adhoc_join->bss_descriptor.bssid,
+ &bss_desc->mac_address, ETH_ALEN);
+
+ memcpy(&adhoc_join->bss_descriptor.ssid,
+ &bss_desc->ssid.ssid, bss_desc->ssid.ssid_len);
+
+ memcpy(&adhoc_join->bss_descriptor.phy_param_set,
+ &bss_desc->phy_param_set,
+ sizeof(union ieee_types_phy_param_set));
+
+ memcpy(&adhoc_join->bss_descriptor.ss_param_set,
+ &bss_desc->ss_param_set, sizeof(union ieee_types_ss_param_set));
+
+ tmp_cap = bss_desc->cap_info_bitmap;
+
+ tmp_cap &= CAPINFO_MASK;
+
+ dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: tmp_cap=%4X"
+ " CAPINFO_MASK=%4lX\n", tmp_cap, CAPINFO_MASK);
+
+ /* Information on BSSID descriptor passed to FW */
+ dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: BSSID = %pM, SSID = %s\n",
+ adhoc_join->bss_descriptor.bssid,
+ adhoc_join->bss_descriptor.ssid);
+
+ for (i = 0; bss_desc->supported_rates[i] &&
+ i < MWIFIEX_SUPPORTED_RATES;
+ i++)
+ ;
+ rates_size = i;
+
+ /* Copy Data Rates from the Rates recorded in scan response */
+ memset(adhoc_join->bss_descriptor.data_rates, 0,
+ sizeof(adhoc_join->bss_descriptor.data_rates));
+ memcpy(adhoc_join->bss_descriptor.data_rates,
+ bss_desc->supported_rates, rates_size);
+
+ /* Copy the adhoc join rates into Current BSS state structure */
+ priv->curr_bss_params.num_of_rates = rates_size;
+ memcpy(&priv->curr_bss_params.data_rates, bss_desc->supported_rates,
+ rates_size);
+
+ /* Copy the channel information */
+ priv->curr_bss_params.bss_descriptor.channel = bss_desc->channel;
+ priv->curr_bss_params.band = (u8) bss_desc->bss_band;
+
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED
+ || priv->sec_info.wpa_enabled)
+ tmp_cap |= WLAN_CAPABILITY_PRIVACY;
+
+ if (IS_SUPPORT_MULTI_BANDS(priv->adapter)) {
+ /* Append a channel TLV */
+ chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos;
+ chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
+ chan_tlv->header.len =
+ cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set));
+
+ memset(chan_tlv->chan_scan_param, 0x00,
+ sizeof(struct mwifiex_chan_scan_param_set));
+ chan_tlv->chan_scan_param[0].chan_number =
+ (bss_desc->phy_param_set.ds_param_set.current_chan);
+ dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: TLV Chan = %d\n",
+ chan_tlv->chan_scan_param[0].chan_number);
+
+ chan_tlv->chan_scan_param[0].radio_type =
+ mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
+
+ dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: TLV Band = %d\n",
+ chan_tlv->chan_scan_param[0].radio_type);
+ pos += sizeof(chan_tlv->header) +
+ sizeof(struct mwifiex_chan_scan_param_set);
+ cmd_append_size += sizeof(chan_tlv->header) +
+ sizeof(struct mwifiex_chan_scan_param_set);
+ }
+
+ if (priv->sec_info.wpa_enabled)
+ rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos);
+ if (rsn_ie_len == -1)
+ return -1;
+ cmd_append_size += rsn_ie_len;
+
+ if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info))
+ cmd_append_size += mwifiex_cmd_append_11n_tlv(priv,
+ bss_desc, &pos);
+
+ /* Append vendor specific IE TLV */
+ cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv,
+ MWIFIEX_VSIE_MASK_ADHOC, &pos);
+
+ cmd->size = cpu_to_le16((u16)
+ (sizeof(struct host_cmd_ds_802_11_ad_hoc_join)
+ + S_DS_GEN + cmd_append_size));
+
+ adhoc_join->bss_descriptor.cap_info_bitmap = cpu_to_le16(tmp_cap);
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of ad-hoc start and
+ * ad-hoc join.
+ *
+ * The function generates a device-connected event to notify
+ * the applications, in case of successful ad-hoc start/join, and
+ * saves the beacon buffer.
+ */
+int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ int ret = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11_ad_hoc_result *adhoc_result;
+ struct mwifiex_bssdescriptor *bss_desc;
+
+ adhoc_result = &resp->params.adhoc_result;
+
+ bss_desc = priv->attempted_bss_desc;
+
+ /* Join result code 0 --> SUCCESS */
+ if (le16_to_cpu(resp->result)) {
+ dev_err(priv->adapter->dev, "ADHOC_RESP: failed\n");
+ if (priv->media_connected)
+ mwifiex_reset_connect_state(priv);
+
+ memset(&priv->curr_bss_params.bss_descriptor,
+ 0x00, sizeof(struct mwifiex_bssdescriptor));
+
+ ret = -1;
+ goto done;
+ }
+
+ /* Send a Media Connected event, according to the Spec */
+ priv->media_connected = true;
+
+ if (le16_to_cpu(resp->command) == HostCmd_CMD_802_11_AD_HOC_START) {
+ dev_dbg(priv->adapter->dev, "info: ADHOC_S_RESP %s\n",
+ bss_desc->ssid.ssid);
+
+ /* Update the created network descriptor with the new BSSID */
+ memcpy(bss_desc->mac_address,
+ adhoc_result->bssid, ETH_ALEN);
+
+ priv->adhoc_state = ADHOC_STARTED;
+ } else {
+ /*
+ * Now the join cmd should be successful.
+ * If BSSID has changed use SSID to compare instead of BSSID
+ */
+ dev_dbg(priv->adapter->dev, "info: ADHOC_J_RESP %s\n",
+ bss_desc->ssid.ssid);
+
+ /*
+ * Make a copy of current BSSID descriptor, only needed for
+ * join since the current descriptor is already being used
+ * for adhoc start
+ */
+ memcpy(&priv->curr_bss_params.bss_descriptor,
+ bss_desc, sizeof(struct mwifiex_bssdescriptor));
+
+ priv->adhoc_state = ADHOC_JOINED;
+ }
+
+ dev_dbg(priv->adapter->dev, "info: ADHOC_RESP: channel = %d\n",
+ priv->adhoc_channel);
+ dev_dbg(priv->adapter->dev, "info: ADHOC_RESP: BSSID = %pM\n",
+ priv->curr_bss_params.bss_descriptor.mac_address);
+
+ if (!netif_carrier_ok(priv->netdev))
+ netif_carrier_on(priv->netdev);
+ if (netif_queue_stopped(priv->netdev))
+ netif_wake_queue(priv->netdev);
+
+ mwifiex_save_curr_bcn(priv);
+
+done:
+ /* Need to indicate IOCTL complete */
+ if (adapter->curr_cmd->wait_q_enabled) {
+ if (ret)
+ adapter->cmd_wait_q.status = -1;
+ else
+ adapter->cmd_wait_q.status = 0;
+
+ }
+
+ return ret;
+}
+
+/*
+ * This function associates to a specific BSS discovered in a scan.
+ *
+ * It clears any past association response stored for application
+ * retrieval and calls the command preparation routine to send the
+ * command to firmware.
+ */
+int mwifiex_associate(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ u8 current_bssid[ETH_ALEN];
+
+ /* Return error if the adapter or table entry is not marked as infra */
+ if ((priv->bss_mode != NL80211_IFTYPE_STATION) ||
+ (bss_desc->bss_mode != NL80211_IFTYPE_STATION))
+ return -1;
+
+ memcpy(¤t_bssid,
+ &priv->curr_bss_params.bss_descriptor.mac_address,
+ sizeof(current_bssid));
+
+ /* Clear any past association response stored for application
+ retrieval */
+ priv->assoc_rsp_size = 0;
+
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_ASSOCIATE,
+ HostCmd_ACT_GEN_SET, 0, bss_desc);
+}
+
+/*
+ * This function starts an ad-hoc network.
+ *
+ * It calls the command preparation routine to send the command to firmware.
+ */
+int
+mwifiex_adhoc_start(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *adhoc_ssid)
+{
+ dev_dbg(priv->adapter->dev, "info: Adhoc Channel = %d\n",
+ priv->adhoc_channel);
+ dev_dbg(priv->adapter->dev, "info: curr_bss_params.channel = %d\n",
+ priv->curr_bss_params.bss_descriptor.channel);
+ dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %d\n",
+ priv->curr_bss_params.band);
+
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_START,
+ HostCmd_ACT_GEN_SET, 0, adhoc_ssid);
+}
+
+/*
+ * This function joins an ad-hoc network found in a previous scan.
+ *
+ * It calls the command preparation routine to send the command to firmware,
+ * if already not connected to the requested SSID.
+ */
+int mwifiex_adhoc_join(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ dev_dbg(priv->adapter->dev, "info: adhoc join: curr_bss ssid =%s\n",
+ priv->curr_bss_params.bss_descriptor.ssid.ssid);
+ dev_dbg(priv->adapter->dev, "info: adhoc join: curr_bss ssid_len =%u\n",
+ priv->curr_bss_params.bss_descriptor.ssid.ssid_len);
+ dev_dbg(priv->adapter->dev, "info: adhoc join: ssid =%s\n",
+ bss_desc->ssid.ssid);
+ dev_dbg(priv->adapter->dev, "info: adhoc join: ssid_len =%u\n",
+ bss_desc->ssid.ssid_len);
+
+ /* Check if the requested SSID is already joined */
+ if (priv->curr_bss_params.bss_descriptor.ssid.ssid_len &&
+ !mwifiex_ssid_cmp(&bss_desc->ssid,
+ &priv->curr_bss_params.bss_descriptor.ssid) &&
+ (priv->curr_bss_params.bss_descriptor.bss_mode ==
+ NL80211_IFTYPE_ADHOC)) {
+ dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: new ad-hoc SSID"
+ " is the same as current; not attempting to re-join\n");
+ return -1;
+ }
+
+ dev_dbg(priv->adapter->dev, "info: curr_bss_params.channel = %d\n",
+ priv->curr_bss_params.bss_descriptor.channel);
+ dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %c\n",
+ priv->curr_bss_params.band);
+
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_JOIN,
+ HostCmd_ACT_GEN_SET, 0, bss_desc);
+}
+
+/*
+ * This function deauthenticates/disconnects from infra network by sending
+ * deauthentication request.
+ */
+static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac)
+{
+ u8 mac_address[ETH_ALEN];
+ int ret;
+ u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
+
+ if (mac) {
+ if (!memcmp(mac, zero_mac, sizeof(zero_mac)))
+ memcpy((u8 *) &mac_address,
+ (u8 *) &priv->curr_bss_params.bss_descriptor.
+ mac_address, ETH_ALEN);
+ else
+ memcpy((u8 *) &mac_address, (u8 *) mac, ETH_ALEN);
+ } else {
+ memcpy((u8 *) &mac_address, (u8 *) &priv->curr_bss_params.
+ bss_descriptor.mac_address, ETH_ALEN);
+ }
+
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_DEAUTHENTICATE,
+ HostCmd_ACT_GEN_SET, 0, &mac_address);
+
+ return ret;
+}
+
+/*
+ * This function deauthenticates/disconnects from a BSS.
+ *
+ * In case of infra made, it sends deauthentication request, and
+ * in case of ad-hoc mode, a stop network request is sent to the firmware.
+ */
+int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac)
+{
+ int ret = 0;
+
+ if (priv->media_connected) {
+ if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ ret = mwifiex_deauthenticate_infra(priv, mac);
+ } else if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+ ret = mwifiex_send_cmd_sync(priv,
+ HostCmd_CMD_802_11_AD_HOC_STOP,
+ HostCmd_ACT_GEN_SET, 0, NULL);
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mwifiex_deauthenticate);
+
+/*
+ * This function converts band to radio type used in channel TLV.
+ */
+u8
+mwifiex_band_to_radio_type(u8 band)
+{
+ switch (band) {
+ case BAND_A:
+ case BAND_AN:
+ case BAND_A | BAND_AN:
+ return HostCmd_SCAN_RADIO_TYPE_A;
+ case BAND_B:
+ case BAND_G:
+ case BAND_B | BAND_G:
+ default:
+ return HostCmd_SCAN_RADIO_TYPE_BG;
+ }
+}
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
new file mode 100644
index 0000000..f058225
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -0,0 +1,1055 @@
+/*
+ * Marvell Wireless LAN device driver: major functions
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "main.h"
+#include "wmm.h"
+#include "cfg80211.h"
+#include "11n.h"
+
+#define VERSION "1.0"
+
+const char driver_version[] = "mwifiex " VERSION " (%s) ";
+
+struct mwifiex_adapter *g_adapter;
+EXPORT_SYMBOL_GPL(g_adapter);
+
+static struct mwifiex_bss_attr mwifiex_bss_sta[] = {
+ {MWIFIEX_BSS_TYPE_STA, MWIFIEX_DATA_FRAME_TYPE_ETH_II, true, 0, 0},
+};
+
+static int drv_mode = DRV_MODE_STA;
+
+static char fw_name[32] = DEFAULT_FW_NAME;
+
+/* Supported drv_mode table */
+static struct mwifiex_drv_mode mwifiex_drv_mode_tbl[] = {
+ {
+ .drv_mode = DRV_MODE_STA,
+ .intf_num = ARRAY_SIZE(mwifiex_bss_sta),
+ .bss_attr = mwifiex_bss_sta,
+ },
+};
+
+/*
+ * This function registers the device and performs all the necessary
+ * initializations.
+ *
+ * The following initialization operations are performed -
+ * - Allocate adapter structure
+ * - Save interface specific operations table in adapter
+ * - Call interface specific initialization routine
+ * - Allocate private structures
+ * - Set default adapter structure parameters
+ * - Initialize locks
+ *
+ * In case of any errors during inittialization, this function also ensures
+ * proper cleanup before exiting.
+ */
+static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops,
+ struct mwifiex_drv_mode *drv_mode_ptr)
+{
+ struct mwifiex_adapter *adapter;
+ int i;
+
+ adapter = kzalloc(sizeof(struct mwifiex_adapter), GFP_KERNEL);
+ if (!adapter)
+ return -ENOMEM;
+
+ g_adapter = adapter;
+ adapter->card = card;
+
+ /* Save interface specific operations in adapter */
+ memmove(&adapter->if_ops, if_ops, sizeof(struct mwifiex_if_ops));
+
+ /* card specific initialization has been deferred until now .. */
+ if (adapter->if_ops.init_if(adapter))
+ goto error;
+
+ adapter->priv_num = 0;
+ for (i = 0; i < drv_mode_ptr->intf_num; i++) {
+ adapter->priv[i] = NULL;
+
+ if (!drv_mode_ptr->bss_attr[i].active)
+ continue;
+
+ /* Allocate memory for private structure */
+ adapter->priv[i] = kzalloc(sizeof(struct mwifiex_private),
+ GFP_KERNEL);
+ if (!adapter->priv[i]) {
+ dev_err(adapter->dev, "%s: failed to alloc priv[%d]\n",
+ __func__, i);
+ goto error;
+ }
+
+ adapter->priv_num++;
+ adapter->priv[i]->adapter = adapter;
+ /* Save bss_type, frame_type & bss_priority */
+ adapter->priv[i]->bss_type = drv_mode_ptr->bss_attr[i].bss_type;
+ adapter->priv[i]->frame_type =
+ drv_mode_ptr->bss_attr[i].frame_type;
+ adapter->priv[i]->bss_priority =
+ drv_mode_ptr->bss_attr[i].bss_priority;
+
+ if (drv_mode_ptr->bss_attr[i].bss_type == MWIFIEX_BSS_TYPE_STA)
+ adapter->priv[i]->bss_role = MWIFIEX_BSS_ROLE_STA;
+ else if (drv_mode_ptr->bss_attr[i].bss_type ==
+ MWIFIEX_BSS_TYPE_UAP)
+ adapter->priv[i]->bss_role = MWIFIEX_BSS_ROLE_UAP;
+
+ /* Save bss_index & bss_num */
+ adapter->priv[i]->bss_index = i;
+ adapter->priv[i]->bss_num = drv_mode_ptr->bss_attr[i].bss_num;
+ }
+ adapter->drv_mode = drv_mode_ptr;
+
+ if (mwifiex_init_lock_list(adapter))
+ goto error;
+
+ init_timer(&adapter->cmd_timer);
+ adapter->cmd_timer.function = mwifiex_cmd_timeout_func;
+ adapter->cmd_timer.data = (unsigned long) adapter;
+
+ return 0;
+
+error:
+ dev_dbg(adapter->dev, "info: leave mwifiex_register with error\n");
+
+ mwifiex_free_lock_list(adapter);
+ for (i = 0; i < drv_mode_ptr->intf_num; i++)
+ kfree(adapter->priv[i]);
+ kfree(adapter);
+
+ return -1;
+}
+
+/*
+ * This function unregisters the device and performs all the necessary
+ * cleanups.
+ *
+ * The following cleanup operations are performed -
+ * - Free the timers
+ * - Free beacon buffers
+ * - Free private structures
+ * - Free adapter structure
+ */
+static int mwifiex_unregister(struct mwifiex_adapter *adapter)
+{
+ s32 i;
+
+ del_timer(&adapter->cmd_timer);
+
+ /* Free private structures */
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ mwifiex_free_curr_bcn(adapter->priv[i]);
+ kfree(adapter->priv[i]);
+ }
+ }
+
+ kfree(adapter);
+ return 0;
+}
+
+/*
+ * The main process.
+ *
+ * This function is the main procedure of the driver and handles various driver
+ * operations. It runs in a loop and provides the core functionalities.
+ *
+ * The main responsibilities of this function are -
+ * - Ensure concurrency control
+ * - Handle pending interrupts and call interrupt handlers
+ * - Wake up the card if required
+ * - Handle command responses and call response handlers
+ * - Handle events and call event handlers
+ * - Execute pending commands
+ * - Transmit pending data packets
+ */
+int mwifiex_main_process(struct mwifiex_adapter *adapter)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->main_proc_lock, flags);
+
+ /* Check if already processing */
+ if (adapter->mwifiex_processing) {
+ spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
+ goto exit_main_proc;
+ } else {
+ adapter->mwifiex_processing = true;
+ spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
+ }
+process_start:
+ do {
+ if ((adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) ||
+ (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY))
+ break;
+
+ /* Handle pending interrupt if any */
+ if (adapter->int_status) {
+ if (adapter->hs_activated)
+ mwifiex_process_hs_config(adapter);
+ adapter->if_ops.process_int_status(adapter);
+ }
+
+ /* Need to wake up the card ? */
+ if ((adapter->ps_state == PS_STATE_SLEEP) &&
+ (adapter->pm_wakeup_card_req &&
+ !adapter->pm_wakeup_fw_try) &&
+ (is_command_pending(adapter)
+ || !mwifiex_wmm_lists_empty(adapter))) {
+ adapter->pm_wakeup_fw_try = true;
+ adapter->if_ops.wakeup(adapter);
+ continue;
+ }
+ if (IS_CARD_RX_RCVD(adapter)) {
+ adapter->pm_wakeup_fw_try = false;
+ if (adapter->ps_state == PS_STATE_SLEEP)
+ adapter->ps_state = PS_STATE_AWAKE;
+ } else {
+ /* We have tried to wakeup the card already */
+ if (adapter->pm_wakeup_fw_try)
+ break;
+ if (adapter->ps_state != PS_STATE_AWAKE ||
+ adapter->tx_lock_flag)
+ break;
+
+ if (adapter->scan_processing || adapter->data_sent
+ || mwifiex_wmm_lists_empty(adapter)) {
+ if (adapter->cmd_sent || adapter->curr_cmd
+ || (!is_command_pending(adapter)))
+ break;
+ }
+ }
+
+ /* Check for Cmd Resp */
+ if (adapter->cmd_resp_received) {
+ adapter->cmd_resp_received = false;
+ mwifiex_process_cmdresp(adapter);
+
+ /* call mwifiex back when init_fw is done */
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE) {
+ adapter->hw_status = MWIFIEX_HW_STATUS_READY;
+ mwifiex_init_fw_complete(adapter);
+ }
+ }
+
+ /* Check for event */
+ if (adapter->event_received) {
+ adapter->event_received = false;
+ mwifiex_process_event(adapter);
+ }
+
+ /* Check if we need to confirm Sleep Request
+ received previously */
+ if (adapter->ps_state == PS_STATE_PRE_SLEEP) {
+ if (!adapter->cmd_sent && !adapter->curr_cmd)
+ mwifiex_check_ps_cond(adapter);
+ }
+
+ /* * The ps_state may have been changed during processing of
+ * Sleep Request event.
+ */
+ if ((adapter->ps_state == PS_STATE_SLEEP)
+ || (adapter->ps_state == PS_STATE_PRE_SLEEP)
+ || (adapter->ps_state == PS_STATE_SLEEP_CFM)
+ || adapter->tx_lock_flag)
+ continue;
+
+ if (!adapter->cmd_sent && !adapter->curr_cmd) {
+ if (mwifiex_exec_next_cmd(adapter) == -1) {
+ ret = -1;
+ break;
+ }
+ }
+
+ if (!adapter->scan_processing && !adapter->data_sent &&
+ !mwifiex_wmm_lists_empty(adapter)) {
+ mwifiex_wmm_process_tx(adapter);
+ if (adapter->hs_activated) {
+ adapter->is_hs_configured = false;
+ mwifiex_hs_activated_event
+ (mwifiex_get_priv
+ (adapter, MWIFIEX_BSS_ROLE_ANY),
+ false);
+ }
+ }
+
+ if (adapter->delay_null_pkt && !adapter->cmd_sent &&
+ !adapter->curr_cmd && !is_command_pending(adapter)
+ && mwifiex_wmm_lists_empty(adapter)) {
+ if (!mwifiex_send_null_packet
+ (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
+ MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET |
+ MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) {
+ adapter->delay_null_pkt = false;
+ adapter->ps_state = PS_STATE_SLEEP;
+ }
+ break;
+ }
+ } while (true);
+
+ if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter))
+ goto process_start;
+
+ spin_lock_irqsave(&adapter->main_proc_lock, flags);
+ adapter->mwifiex_processing = false;
+ spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
+
+exit_main_proc:
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING)
+ mwifiex_shutdown_drv(adapter);
+ return ret;
+}
+
+/*
+ * This function initializes the software.
+ *
+ * The main work includes allocating and initializing the adapter structure
+ * and initializing the private structures.
+ */
+static int
+mwifiex_init_sw(void *card, struct mwifiex_if_ops *if_ops)
+{
+ int i;
+ struct mwifiex_drv_mode *drv_mode_ptr;
+
+ /* find mwifiex_drv_mode entry from mwifiex_drv_mode_tbl */
+ drv_mode_ptr = NULL;
+ for (i = 0; i < ARRAY_SIZE(mwifiex_drv_mode_tbl); i++) {
+ if (mwifiex_drv_mode_tbl[i].drv_mode == drv_mode) {
+ drv_mode_ptr = &mwifiex_drv_mode_tbl[i];
+ break;
+ }
+ }
+
+ if (!drv_mode_ptr) {
+ pr_err("invalid drv_mode=%d\n", drv_mode);
+ return -1;
+ }
+
+ if (mwifiex_register(card, if_ops, drv_mode_ptr))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * This function frees the adapter structure.
+ *
+ * Additionally, this closes the netlink socket, frees the timers
+ * and private structures.
+ */
+static void mwifiex_free_adapter(struct mwifiex_adapter *adapter)
+{
+ if (!adapter) {
+ pr_err("%s: adapter is NULL\n", __func__);
+ return;
+ }
+
+ mwifiex_unregister(adapter);
+ pr_debug("info: %s: free adapter\n", __func__);
+}
+
+/*
+ * This function initializes the hardware and firmware.
+ *
+ * The main initialization steps followed are -
+ * - Download the correct firmware to card
+ * - Allocate and initialize the adapter structure
+ * - Initialize the private structures
+ * - Issue the init commands to firmware
+ */
+static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter)
+{
+ int ret, err;
+ struct mwifiex_fw_image fw;
+
+ memset(&fw, 0, sizeof(struct mwifiex_fw_image));
+
+ switch (adapter->revision_id) {
+ case SD8787_W0:
+ case SD8787_W1:
+ strcpy(fw_name, SD8787_W1_FW_NAME);
+ break;
+ case SD8787_A0:
+ case SD8787_A1:
+ strcpy(fw_name, SD8787_AX_FW_NAME);
+ break;
+ default:
+ break;
+ }
+
+ err = request_firmware(&adapter->firmware, fw_name, adapter->dev);
+ if (err < 0) {
+ dev_err(adapter->dev, "request_firmware() returned"
+ " error code %#x\n", err);
+ ret = -1;
+ goto done;
+ }
+ fw.fw_buf = (u8 *) adapter->firmware->data;
+ fw.fw_len = adapter->firmware->size;
+
+ ret = mwifiex_dnld_fw(adapter, &fw);
+ if (ret == -1)
+ goto done;
+
+ dev_notice(adapter->dev, "WLAN FW is active\n");
+
+ adapter->init_wait_q_woken = false;
+ ret = mwifiex_init_fw(adapter);
+ if (ret == -1) {
+ goto done;
+ } else if (!ret) {
+ adapter->hw_status = MWIFIEX_HW_STATUS_READY;
+ goto done;
+ }
+ /* Wait for mwifiex_init to complete */
+ wait_event_interruptible(adapter->init_wait_q,
+ adapter->init_wait_q_woken);
+ if (adapter->hw_status != MWIFIEX_HW_STATUS_READY) {
+ ret = -1;
+ goto done;
+ }
+ ret = 0;
+
+done:
+ if (adapter->firmware)
+ release_firmware(adapter->firmware);
+ if (ret)
+ ret = -1;
+ return ret;
+}
+
+/*
+ * This function fills a driver buffer.
+ *
+ * The function associates a given SKB with the provided driver buffer
+ * and also updates some of the SKB parameters, including IP header,
+ * priority and timestamp.
+ */
+static void
+mwifiex_fill_buffer(struct sk_buff *skb)
+{
+ struct ethhdr *eth;
+ struct iphdr *iph;
+ struct timeval tv;
+ u8 tid = 0;
+
+ eth = (struct ethhdr *) skb->data;
+ switch (eth->h_proto) {
+ case __constant_htons(ETH_P_IP):
+ iph = ip_hdr(skb);
+ tid = IPTOS_PREC(iph->tos);
+ pr_debug("data: packet type ETH_P_IP: %04x, tid=%#x prio=%#x\n",
+ eth->h_proto, tid, skb->priority);
+ break;
+ case __constant_htons(ETH_P_ARP):
+ pr_debug("data: ARP packet: %04x\n", eth->h_proto);
+ default:
+ break;
+ }
+/* Offset for TOS field in the IP header */
+#define IPTOS_OFFSET 5
+ tid = (tid >> IPTOS_OFFSET);
+ skb->priority = tid;
+ /* Record the current time the packet was queued; used to
+ determine the amount of time the packet was queued in
+ the driver before it was sent to the firmware.
+ The delay is then sent along with the packet to the
+ firmware for aggregate delay calculation for stats and
+ MSDU lifetime expiry.
+ */
+ do_gettimeofday(&tv);
+ skb->tstamp = timeval_to_ktime(tv);
+}
+
+/*
+ * CFG802.11 network device handler for open.
+ *
+ * Starts the data queue.
+ */
+static int
+mwifiex_open(struct net_device *dev)
+{
+ netif_start_queue(dev);
+ return 0;
+}
+
+/*
+ * CFG802.11 network device handler for close.
+ */
+static int
+mwifiex_close(struct net_device *dev)
+{
+ return 0;
+}
+
+/*
+ * CFG802.11 network device handler for data transmission.
+ */
+static int
+mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+ struct sk_buff *new_skb;
+ struct mwifiex_txinfo *tx_info;
+
+ dev_dbg(priv->adapter->dev, "data: %lu BSS(%d): Data <= kernel\n",
+ jiffies, priv->bss_index);
+
+ if (priv->adapter->surprise_removed) {
+ kfree_skb(skb);
+ priv->stats.tx_dropped++;
+ return 0;
+ }
+ if (!skb->len || (skb->len > ETH_FRAME_LEN)) {
+ dev_err(priv->adapter->dev, "Tx: bad skb len %d\n", skb->len);
+ kfree_skb(skb);
+ priv->stats.tx_dropped++;
+ return 0;
+ }
+ if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) {
+ dev_dbg(priv->adapter->dev,
+ "data: Tx: insufficient skb headroom %d\n",
+ skb_headroom(skb));
+ /* Insufficient skb headroom - allocate a new skb */
+ new_skb =
+ skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
+ if (unlikely(!new_skb)) {
+ dev_err(priv->adapter->dev, "Tx: cannot alloca new_skb\n");
+ kfree_skb(skb);
+ priv->stats.tx_dropped++;
+ return 0;
+ }
+ kfree_skb(skb);
+ skb = new_skb;
+ dev_dbg(priv->adapter->dev, "info: new skb headroomd %d\n",
+ skb_headroom(skb));
+ }
+
+ tx_info = MWIFIEX_SKB_TXCB(skb);
+ tx_info->bss_index = priv->bss_index;
+ mwifiex_fill_buffer(skb);
+
+ mwifiex_wmm_add_buf_txqueue(priv->adapter, skb);
+ atomic_inc(&priv->adapter->tx_pending);
+
+ if (atomic_read(&priv->adapter->tx_pending) >= MAX_TX_PENDING) {
+ netif_stop_queue(priv->netdev);
+ dev->trans_start = jiffies;
+ }
+
+ queue_work(priv->adapter->workqueue, &priv->adapter->main_work);
+
+ return 0;
+}
+
+/*
+ * CFG802.11 network device handler for setting MAC address.
+ */
+static int
+mwifiex_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+ struct sockaddr *hw_addr = (struct sockaddr *) addr;
+ int ret;
+
+ memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN);
+
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_MAC_ADDRESS,
+ HostCmd_ACT_GEN_SET, 0, NULL);
+
+ if (!ret)
+ memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN);
+ else
+ dev_err(priv->adapter->dev, "set mac address failed: ret=%d"
+ "\n", ret);
+
+ memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN);
+
+ return ret;
+}
+
+/*
+ * CFG802.11 network device handler for setting multicast list.
+ */
+static void mwifiex_set_multicast_list(struct net_device *dev)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+ struct mwifiex_multicast_list mcast_list;
+
+ if (dev->flags & IFF_PROMISC) {
+ mcast_list.mode = MWIFIEX_PROMISC_MODE;
+ } else if (dev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) {
+ mcast_list.mode = MWIFIEX_ALL_MULTI_MODE;
+ } else {
+ mcast_list.mode = MWIFIEX_MULTICAST_MODE;
+ if (netdev_mc_count(dev))
+ mcast_list.num_multicast_addr =
+ mwifiex_copy_mcast_addr(&mcast_list, dev);
+ }
+ mwifiex_request_set_multicast_list(priv, &mcast_list);
+}
+
+/*
+ * CFG802.11 network device handler for transmission timeout.
+ */
+static void
+mwifiex_tx_timeout(struct net_device *dev)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+ dev_err(priv->adapter->dev, "%lu : Tx timeout, bss_index=%d\n",
+ jiffies, priv->bss_index);
+ dev->trans_start = jiffies;
+ priv->num_tx_timeout++;
+}
+
+/*
+ * CFG802.11 network device handler for statistics retrieval.
+ */
+static struct net_device_stats *mwifiex_get_stats(struct net_device *dev)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+ return &priv->stats;
+}
+
+/* Network device handlers */
+static const struct net_device_ops mwifiex_netdev_ops = {
+ .ndo_open = mwifiex_open,
+ .ndo_stop = mwifiex_close,
+ .ndo_start_xmit = mwifiex_hard_start_xmit,
+ .ndo_set_mac_address = mwifiex_set_mac_address,
+ .ndo_tx_timeout = mwifiex_tx_timeout,
+ .ndo_get_stats = mwifiex_get_stats,
+ .ndo_set_multicast_list = mwifiex_set_multicast_list,
+};
+
+/*
+ * This function initializes the private structure parameters.
+ *
+ * The following wait queues are initialized -
+ * - IOCTL wait queue
+ * - Command wait queue
+ * - Statistics wait queue
+ *
+ * ...and the following default parameters are set -
+ * - Current key index : Set to 0
+ * - Rate index : Set to auto
+ * - Media connected : Set to disconnected
+ * - Adhoc link sensed : Set to false
+ * - Nick name : Set to null
+ * - Number of Tx timeout : Set to 0
+ * - Device address : Set to current address
+ *
+ * In addition, the CFG80211 work queue is also created.
+ */
+static void
+mwifiex_init_priv_params(struct mwifiex_private *priv, struct net_device *dev)
+{
+ dev->netdev_ops = &mwifiex_netdev_ops;
+ /* Initialize private structure */
+ priv->current_key_index = 0;
+ priv->media_connected = false;
+ memset(&priv->nick_name, 0, sizeof(priv->nick_name));
+ priv->num_tx_timeout = 0;
+ priv->workqueue = create_singlethread_workqueue("cfg80211_wq");
+ INIT_WORK(&priv->cfg_workqueue, mwifiex_cfg80211_results);
+ memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN);
+}
+
+/*
+ * This function adds a new logical interface.
+ *
+ * It allocates, initializes and registers the interface by performing
+ * the following opearations -
+ * - Allocate a new net device structure
+ * - Assign device name
+ * - Register the new device with CFG80211 subsystem
+ * - Initialize semaphore and private structure
+ * - Register the new device with kernel
+ * - Create the complete debug FS structure if configured
+ */
+static struct mwifiex_private *mwifiex_add_interface(
+ struct mwifiex_adapter *adapter,
+ u8 bss_index, u8 bss_type)
+{
+ struct net_device *dev;
+ struct mwifiex_private *priv;
+ void *mdev_priv;
+
+ dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), "mlan%d",
+ ether_setup, 1);
+ if (!dev) {
+ dev_err(adapter->dev, "no memory available for netdevice\n");
+ goto error;
+ }
+
+ if (mwifiex_register_cfg80211(dev, adapter->priv[bss_index]->curr_addr,
+ adapter->priv[bss_index]) != 0) {
+ dev_err(adapter->dev, "cannot register netdevice with cfg80211\n");
+ goto error;
+ }
+ /* Save the priv pointer in netdev */
+ priv = adapter->priv[bss_index];
+ mdev_priv = netdev_priv(dev);
+ *((unsigned long *) mdev_priv) = (unsigned long) priv;
+
+ priv->netdev = dev;
+
+ sema_init(&priv->async_sem, 1);
+ priv->scan_pending_on_block = false;
+
+ mwifiex_init_priv_params(priv, dev);
+
+ SET_NETDEV_DEV(dev, adapter->dev);
+
+ /* Register network device */
+ if (register_netdev(dev)) {
+ dev_err(adapter->dev, "cannot register virtual network device\n");
+ goto error;
+ }
+
+ dev_dbg(adapter->dev, "info: %s: Marvell 802.11 Adapter\n", dev->name);
+#ifdef CONFIG_DEBUG_FS
+ mwifiex_dev_debugfs_init(priv);
+#endif
+ return priv;
+error:
+ if (dev)
+ free_netdev(dev);
+ return NULL;
+}
+
+/*
+ * This function removes a logical interface.
+ *
+ * It deregisters, resets and frees the interface by performing
+ * the following operations -
+ * - Disconnect the device if connected, send wireless event to
+ * notify applications.
+ * - Remove the debug FS structure if configured
+ * - Unregister the device from kernel
+ * - Free the net device structure
+ * - Cancel all works and destroy work queue
+ * - Unregister and free the wireless device from CFG80211 subsystem
+ */
+static void
+mwifiex_remove_interface(struct mwifiex_adapter *adapter, u8 bss_index)
+{
+ struct net_device *dev;
+ struct mwifiex_private *priv = adapter->priv[bss_index];
+
+ if (!priv)
+ return;
+ dev = priv->netdev;
+
+ if (priv->media_connected)
+ priv->media_connected = false;
+
+#ifdef CONFIG_DEBUG_FS
+ mwifiex_dev_debugfs_remove(priv);
+#endif
+ /* Last reference is our one */
+ dev_dbg(adapter->dev, "info: %s: refcnt = %d\n",
+ dev->name, netdev_refcnt_read(dev));
+
+ if (dev->reg_state == NETREG_REGISTERED)
+ unregister_netdev(dev);
+
+ /* Clear the priv in adapter */
+ priv->netdev = NULL;
+ if (dev)
+ free_netdev(dev);
+
+ cancel_work_sync(&priv->cfg_workqueue);
+ flush_workqueue(priv->workqueue);
+ destroy_workqueue(priv->workqueue);
+ wiphy_unregister(priv->wdev->wiphy);
+ wiphy_free(priv->wdev->wiphy);
+ kfree(priv->wdev);
+}
+
+/*
+ * This function check if command is pending.
+ */
+int is_command_pending(struct mwifiex_adapter *adapter)
+{
+ unsigned long flags;
+ int is_cmd_pend_q_empty;
+
+ spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags);
+ is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q);
+ spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
+
+ return !is_cmd_pend_q_empty;
+}
+
+/*
+ * This function returns the correct private structure pointer based
+ * upon the BSS number.
+ */
+struct mwifiex_private *
+mwifiex_bss_index_to_priv(struct mwifiex_adapter *adapter, u8 bss_index)
+{
+ if (!adapter || (bss_index >= adapter->priv_num))
+ return NULL;
+ return adapter->priv[bss_index];
+}
+
+/*
+ * This is the main work queue function.
+ *
+ * It handles the main process, which in turn handles the complete
+ * driver operations.
+ */
+static void mwifiex_main_work_queue(struct work_struct *work)
+{
+ struct mwifiex_adapter *adapter =
+ container_of(work, struct mwifiex_adapter, main_work);
+
+ if (adapter->surprise_removed)
+ return;
+ mwifiex_main_process(adapter);
+}
+
+/*
+ * This function cancels all works in the queue and destroys
+ * the main workqueue.
+ */
+static void
+mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter)
+{
+ flush_workqueue(adapter->workqueue);
+ destroy_workqueue(adapter->workqueue);
+ adapter->workqueue = NULL;
+}
+
+/*
+ * This function adds the card.
+ *
+ * This function follows the following major steps to set up the device -
+ * - Initialize software. This includes probing the card, registering
+ * the interface operations table, and allocating/initializing the
+ * adapter structure
+ * - Set up the netlink socket
+ * - Create and start the main work queue
+ * - Register the device
+ * - Initialize firmware and hardware
+ * - Add logical interfaces
+ */
+int
+mwifiex_add_card(void *card, struct semaphore *sem,
+ struct mwifiex_if_ops *if_ops)
+{
+ int i;
+ struct mwifiex_adapter *adapter;
+
+ if (down_interruptible(sem))
+ goto exit_sem_err;
+
+ if (mwifiex_init_sw(card, if_ops)) {
+ pr_err("%s: software init failed\n", __func__);
+ goto err_init_sw;
+ }
+
+ adapter = g_adapter;
+
+ adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING;
+ adapter->surprise_removed = false;
+ init_waitqueue_head(&adapter->init_wait_q);
+ adapter->is_suspended = false;
+ adapter->hs_activated = false;
+ init_waitqueue_head(&adapter->hs_activate_wait_q);
+ adapter->cmd_wait_q_required = false;
+ init_waitqueue_head(&adapter->cmd_wait_q.wait);
+ adapter->cmd_wait_q.condition = false;
+ adapter->cmd_wait_q.status = 0;
+
+ adapter->workqueue = create_workqueue("MWIFIEX_WORK_QUEUE");
+ if (!adapter->workqueue)
+ goto err_kmalloc;
+
+ INIT_WORK(&adapter->main_work, mwifiex_main_work_queue);
+
+ /* Register the device. Fill up the private data structure with relevant
+ information from the card and request for the required IRQ. */
+ if (adapter->if_ops.register_dev(adapter)) {
+ pr_err("%s: failed to register mwifiex device\n", __func__);
+ goto err_registerdev;
+ }
+
+ if (mwifiex_init_hw_fw(adapter)) {
+ pr_err("%s: firmware init failed\n", __func__);
+ goto err_init_fw;
+ }
+
+ /* Add interfaces */
+ for (i = 0; i < adapter->drv_mode->intf_num; i++) {
+ if (!mwifiex_add_interface(adapter, i,
+ adapter->drv_mode->bss_attr[i].bss_type)) {
+ goto err_add_intf;
+ }
+ }
+
+ up(sem);
+
+ return 0;
+
+err_add_intf:
+ for (i = 0; i < adapter->priv_num; i++)
+ mwifiex_remove_interface(adapter, i);
+err_init_fw:
+ pr_debug("info: %s: unregister device\n", __func__);
+ adapter->if_ops.unregister_dev(adapter);
+err_registerdev:
+ adapter->surprise_removed = true;
+ mwifiex_terminate_workqueue(adapter);
+err_kmalloc:
+ if ((adapter->hw_status == MWIFIEX_HW_STATUS_FW_READY) ||
+ (adapter->hw_status == MWIFIEX_HW_STATUS_READY)) {
+ pr_debug("info: %s: shutdown mwifiex\n", __func__);
+ adapter->init_wait_q_woken = false;
+
+ if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS)
+ wait_event_interruptible(adapter->init_wait_q,
+ adapter->init_wait_q_woken);
+ }
+
+ mwifiex_free_adapter(adapter);
+
+err_init_sw:
+ up(sem);
+
+exit_sem_err:
+ return -1;
+}
+EXPORT_SYMBOL_GPL(mwifiex_add_card);
+
+/*
+ * This function removes the card.
+ *
+ * This function follows the following major steps to remove the device -
+ * - Stop data traffic
+ * - Shutdown firmware
+ * - Remove the logical interfaces
+ * - Terminate the work queue
+ * - Unregister the device
+ * - Free the adapter structure
+ */
+int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem)
+{
+ struct mwifiex_private *priv = NULL;
+ int i;
+
+ if (down_interruptible(sem))
+ goto exit_sem_err;
+
+ if (!adapter)
+ goto exit_remove;
+
+ adapter->surprise_removed = true;
+
+ /* Stop data */
+ for (i = 0; i < adapter->priv_num; i++) {
+ priv = adapter->priv[i];
+ if (priv) {
+ if (!netif_queue_stopped(priv->netdev))
+ netif_stop_queue(priv->netdev);
+ if (netif_carrier_ok(priv->netdev))
+ netif_carrier_off(priv->netdev);
+ }
+ }
+
+ dev_dbg(adapter->dev, "cmd: calling mwifiex_shutdown_drv...\n");
+ adapter->init_wait_q_woken = false;
+
+ if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS)
+ wait_event_interruptible(adapter->init_wait_q,
+ adapter->init_wait_q_woken);
+ dev_dbg(adapter->dev, "cmd: mwifiex_shutdown_drv done\n");
+ if (atomic_read(&adapter->rx_pending) ||
+ atomic_read(&adapter->tx_pending) ||
+ atomic_read(&adapter->cmd_pending)) {
+ dev_err(adapter->dev, "rx_pending=%d, tx_pending=%d, "
+ "cmd_pending=%d\n",
+ atomic_read(&adapter->rx_pending),
+ atomic_read(&adapter->tx_pending),
+ atomic_read(&adapter->cmd_pending));
+ }
+
+ /* Remove interface */
+ for (i = 0; i < adapter->priv_num; i++)
+ mwifiex_remove_interface(adapter, i);
+
+ mwifiex_terminate_workqueue(adapter);
+
+ /* Unregister device */
+ dev_dbg(adapter->dev, "info: unregister device\n");
+ adapter->if_ops.unregister_dev(adapter);
+ /* Free adapter structure */
+ dev_dbg(adapter->dev, "info: free adapter\n");
+ mwifiex_free_adapter(adapter);
+
+exit_remove:
+ up(sem);
+exit_sem_err:
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mwifiex_remove_card);
+
+/*
+ * This function initializes the module.
+ *
+ * The debug FS is also initialized if configured.
+ */
+static int
+mwifiex_init_module(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ mwifiex_debugfs_init();
+#endif
+ return 0;
+}
+
+/*
+ * This function cleans up the module.
+ *
+ * The debug FS is removed if available.
+ */
+static void
+mwifiex_cleanup_module(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ mwifiex_debugfs_remove();
+#endif
+}
+
+module_init(mwifiex_init_module);
+module_exit(mwifiex_cleanup_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell WiFi-Ex Driver version " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
new file mode 100644
index 0000000..672701d
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -0,0 +1,1004 @@
+/*
+ * Marvell Wireless LAN device driver: major data structures and prototypes
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_MAIN_H_
+#define _MWIFIEX_MAIN_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/semaphore.h>
+#include <linux/ip.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <net/sock.h>
+#include <net/lib80211.h>
+#include <linux/firmware.h>
+#include <linux/ctype.h>
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+
+extern const char driver_version[];
+extern struct mwifiex_adapter *g_adapter;
+
+enum {
+ MWIFIEX_ASYNC_CMD,
+ MWIFIEX_SYNC_CMD
+};
+
+#define DRV_MODE_STA 0x1
+
+#define SD8787_W0 0x30
+#define SD8787_W1 0x31
+#define SD8787_A0 0x40
+#define SD8787_A1 0x41
+
+#define DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
+#define SD8787_W1_FW_NAME "mrvl/sd8787_uapsta_w1.bin"
+#define SD8787_AX_FW_NAME "mrvl/sd8787_uapsta.bin"
+
+struct mwifiex_drv_mode {
+ u16 drv_mode;
+ u16 intf_num;
+ struct mwifiex_bss_attr *bss_attr;
+};
+
+
+#define MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT (5 * HZ)
+
+#define MWIFIEX_TIMER_10S 10000
+#define MWIFIEX_TIMER_1S 1000
+
+#define MAX_TX_PENDING 60
+
+#define MWIFIEX_UPLD_SIZE (2312)
+
+#define MAX_EVENT_SIZE 1024
+
+#define ARP_FILTER_MAX_BUF_SIZE 68
+
+#define MWIFIEX_KEY_BUFFER_SIZE 16
+#define MWIFIEX_DEFAULT_LISTEN_INTERVAL 10
+#define MWIFIEX_MAX_REGION_CODE 7
+
+#define DEFAULT_BCN_AVG_FACTOR 8
+#define DEFAULT_DATA_AVG_FACTOR 8
+
+#define FIRST_VALID_CHANNEL 0xff
+#define DEFAULT_AD_HOC_CHANNEL 6
+#define DEFAULT_AD_HOC_CHANNEL_A 36
+
+#define DEFAULT_BCN_MISS_TIMEOUT 5
+
+#define MAX_SCAN_BEACON_BUFFER 8000
+
+#define SCAN_BEACON_ENTRY_PAD 6
+
+#define MWIFIEX_PASSIVE_SCAN_CHAN_TIME 200
+#define MWIFIEX_ACTIVE_SCAN_CHAN_TIME 200
+#define MWIFIEX_SPECIFIC_SCAN_CHAN_TIME 110
+
+#define SCAN_RSSI(RSSI) (0x100 - ((u8)(RSSI)))
+
+#define MWIFIEX_MAX_TOTAL_SCAN_TIME (MWIFIEX_TIMER_10S - MWIFIEX_TIMER_1S)
+
+#define RSN_GTK_OUI_OFFSET 2
+
+#define MWIFIEX_OUI_NOT_PRESENT 0
+#define MWIFIEX_OUI_PRESENT 1
+
+#define IS_CARD_RX_RCVD(adapter) (adapter->cmd_resp_received || \
+ adapter->event_received || \
+ adapter->data_received)
+
+#define MWIFIEX_TYPE_CMD 1
+#define MWIFIEX_TYPE_DATA 0
+#define MWIFIEX_TYPE_EVENT 3
+
+#define DBG_CMD_NUM 5
+
+#define MAX_BITMAP_RATES_SIZE 10
+
+#define MAX_CHANNEL_BAND_BG 14
+
+#define MAX_FREQUENCY_BAND_BG 2484
+
+struct mwifiex_dbg {
+ u32 num_cmd_host_to_card_failure;
+ u32 num_cmd_sleep_cfm_host_to_card_failure;
+ u32 num_tx_host_to_card_failure;
+ u32 num_event_deauth;
+ u32 num_event_disassoc;
+ u32 num_event_link_lost;
+ u32 num_cmd_deauth;
+ u32 num_cmd_assoc_success;
+ u32 num_cmd_assoc_failure;
+ u32 num_tx_timeout;
+ u32 num_cmd_timeout;
+ u16 timeout_cmd_id;
+ u16 timeout_cmd_act;
+ u16 last_cmd_id[DBG_CMD_NUM];
+ u16 last_cmd_act[DBG_CMD_NUM];
+ u16 last_cmd_index;
+ u16 last_cmd_resp_id[DBG_CMD_NUM];
+ u16 last_cmd_resp_index;
+ u16 last_event[DBG_CMD_NUM];
+ u16 last_event_index;
+};
+
+enum MWIFIEX_HARDWARE_STATUS {
+ MWIFIEX_HW_STATUS_READY,
+ MWIFIEX_HW_STATUS_INITIALIZING,
+ MWIFIEX_HW_STATUS_FW_READY,
+ MWIFIEX_HW_STATUS_INIT_DONE,
+ MWIFIEX_HW_STATUS_RESET,
+ MWIFIEX_HW_STATUS_CLOSING,
+ MWIFIEX_HW_STATUS_NOT_READY
+};
+
+enum MWIFIEX_802_11_POWER_MODE {
+ MWIFIEX_802_11_POWER_MODE_CAM,
+ MWIFIEX_802_11_POWER_MODE_PSP
+};
+
+struct mwifiex_tx_param {
+ u32 next_pkt_len;
+};
+
+enum MWIFIEX_PS_STATE {
+ PS_STATE_AWAKE,
+ PS_STATE_PRE_SLEEP,
+ PS_STATE_SLEEP_CFM,
+ PS_STATE_SLEEP
+};
+
+struct mwifiex_add_ba_param {
+ u32 tx_win_size;
+ u32 rx_win_size;
+ u32 timeout;
+};
+
+struct mwifiex_tx_aggr {
+ u8 ampdu_user;
+ u8 ampdu_ap;
+ u8 amsdu;
+};
+
+struct mwifiex_ra_list_tbl {
+ struct list_head list;
+ struct sk_buff_head skb_head;
+ u8 ra[ETH_ALEN];
+ u32 total_pkts_size;
+ u32 is_11n_enabled;
+};
+
+struct mwifiex_tid_tbl {
+ struct list_head ra_list;
+ /* spin lock for tid table */
+ spinlock_t tid_tbl_lock;
+ struct mwifiex_ra_list_tbl *ra_list_curr;
+};
+
+#define WMM_HIGHEST_PRIORITY 7
+#define HIGH_PRIO_TID 7
+#define LOW_PRIO_TID 0
+
+struct mwifiex_wmm_desc {
+ struct mwifiex_tid_tbl tid_tbl_ptr[MAX_NUM_TID];
+ u32 packets_out[MAX_NUM_TID];
+ /* spin lock to protect ra_list */
+ spinlock_t ra_list_spinlock;
+ struct mwifiex_wmm_ac_status ac_status[IEEE80211_MAX_QUEUES];
+ enum mwifiex_wmm_ac_e ac_down_graded_vals[IEEE80211_MAX_QUEUES];
+ u32 drv_pkt_delay_max;
+ u8 queue_priority[IEEE80211_MAX_QUEUES];
+ u32 user_pri_pkt_tx_ctrl[WMM_HIGHEST_PRIORITY + 1]; /* UP: 0 to 7 */
+
+};
+
+struct mwifiex_802_11_security {
+ u8 wpa_enabled;
+ u8 wpa2_enabled;
+ u8 wapi_enabled;
+ u8 wapi_key_on;
+ enum MWIFIEX_802_11_WEP_STATUS wep_status;
+ u32 authentication_mode;
+ u32 encryption_mode;
+};
+
+struct ieee_types_header {
+ u8 element_id;
+ u8 len;
+} __packed;
+
+struct ieee_obss_scan_param {
+ u16 obss_scan_passive_dwell;
+ u16 obss_scan_active_dwell;
+ u16 bss_chan_width_trigger_scan_int;
+ u16 obss_scan_passive_total;
+ u16 obss_scan_active_total;
+ u16 bss_width_chan_trans_delay;
+ u16 obss_scan_active_threshold;
+} __packed;
+
+struct ieee_types_obss_scan_param {
+ struct ieee_types_header ieee_hdr;
+ struct ieee_obss_scan_param obss_scan;
+} __packed;
+
+#define MWIFIEX_SUPPORTED_RATES 14
+
+#define MWIFIEX_SUPPORTED_RATES_EXT 32
+
+#define IEEE_MAX_IE_SIZE 256
+
+struct ieee_types_vendor_specific {
+ struct ieee_types_vendor_header vend_hdr;
+ u8 data[IEEE_MAX_IE_SIZE - sizeof(struct ieee_types_vendor_header)];
+} __packed;
+
+struct ieee_types_generic {
+ struct ieee_types_header ieee_hdr;
+ u8 data[IEEE_MAX_IE_SIZE - sizeof(struct ieee_types_header)];
+} __packed;
+
+struct mwifiex_bssdescriptor {
+ u8 mac_address[ETH_ALEN];
+ struct mwifiex_802_11_ssid ssid;
+ u32 privacy;
+ s32 rssi;
+ u32 channel;
+ u32 freq;
+ u16 beacon_period;
+ u8 erp_flags;
+ u32 bss_mode;
+ u8 supported_rates[MWIFIEX_SUPPORTED_RATES];
+ u8 data_rates[MWIFIEX_SUPPORTED_RATES];
+ /* Network band.
+ * BAND_B(0x01): 'b' band
+ * BAND_G(0x02): 'g' band
+ * BAND_A(0X04): 'a' band
+ */
+ u16 bss_band;
+ u64 network_tsf;
+ u8 time_stamp[8];
+ union ieee_types_phy_param_set phy_param_set;
+ union ieee_types_ss_param_set ss_param_set;
+ u16 cap_info_bitmap;
+ struct ieee_types_wmm_parameter wmm_ie;
+ u8 disable_11n;
+ struct ieee80211_ht_cap *bcn_ht_cap;
+ u16 ht_cap_offset;
+ struct ieee80211_ht_info *bcn_ht_info;
+ u16 ht_info_offset;
+ u8 *bcn_bss_co_2040;
+ u16 bss_co_2040_offset;
+ u8 *bcn_ext_cap;
+ u16 ext_cap_offset;
+ struct ieee_types_obss_scan_param *bcn_obss_scan;
+ u16 overlap_bss_offset;
+ struct ieee_types_vendor_specific *bcn_wpa_ie;
+ u16 wpa_offset;
+ struct ieee_types_generic *bcn_rsn_ie;
+ u16 rsn_offset;
+ struct ieee_types_generic *bcn_wapi_ie;
+ u16 wapi_offset;
+ u8 *beacon_buf;
+ u32 beacon_buf_size;
+ u32 beacon_buf_size_max;
+
+};
+
+struct mwifiex_current_bss_params {
+ struct mwifiex_bssdescriptor bss_descriptor;
+ u8 wmm_enabled;
+ u8 wmm_uapsd_enabled;
+ u8 band;
+ u32 num_of_rates;
+ u8 data_rates[MWIFIEX_SUPPORTED_RATES];
+};
+
+struct mwifiex_sleep_params {
+ u16 sp_error;
+ u16 sp_offset;
+ u16 sp_stable_time;
+ u8 sp_cal_control;
+ u8 sp_ext_sleep_clk;
+ u16 sp_reserved;
+};
+
+struct mwifiex_sleep_period {
+ u16 period;
+ u16 reserved;
+};
+
+struct mwifiex_wep_key {
+ u32 length;
+ u32 key_index;
+ u32 key_length;
+ u8 key_material[MWIFIEX_KEY_BUFFER_SIZE];
+};
+
+#define MAX_REGION_CHANNEL_NUM 2
+
+struct mwifiex_chan_freq_power {
+ u16 channel;
+ u32 freq;
+ u16 max_tx_power;
+ u8 unsupported;
+};
+
+enum state_11d_t {
+ DISABLE_11D = 0,
+ ENABLE_11D = 1,
+};
+
+#define MWIFIEX_MAX_TRIPLET_802_11D 83
+
+struct mwifiex_802_11d_domain_reg {
+ u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
+ u8 no_of_triplet;
+ struct ieee80211_country_ie_triplet
+ triplet[MWIFIEX_MAX_TRIPLET_802_11D];
+};
+
+struct mwifiex_vendor_spec_cfg_ie {
+ u16 mask;
+ u16 flag;
+ u8 ie[MWIFIEX_MAX_VSIE_LEN];
+};
+
+struct wps {
+ u8 session_enable;
+};
+
+struct mwifiex_adapter;
+struct mwifiex_private;
+
+struct mwifiex_private {
+ struct mwifiex_adapter *adapter;
+ u8 bss_index;
+ u8 bss_type;
+ u8 bss_role;
+ u8 bss_priority;
+ u8 bss_num;
+ u8 frame_type;
+ u8 curr_addr[ETH_ALEN];
+ u8 media_connected;
+ u32 num_tx_timeout;
+ struct net_device *netdev;
+ struct net_device_stats stats;
+ u16 curr_pkt_filter;
+ u32 bss_mode;
+ u32 pkt_tx_ctrl;
+ u16 tx_power_level;
+ u8 max_tx_power_level;
+ u8 min_tx_power_level;
+ u8 tx_rate;
+ u8 tx_htinfo;
+ u8 rxpd_htinfo;
+ u8 rxpd_rate;
+ u16 rate_bitmap;
+ u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
+ u32 data_rate;
+ u8 is_data_rate_auto;
+ u16 bcn_avg_factor;
+ u16 data_avg_factor;
+ s16 data_rssi_last;
+ s16 data_nf_last;
+ s16 data_rssi_avg;
+ s16 data_nf_avg;
+ s16 bcn_rssi_last;
+ s16 bcn_nf_last;
+ s16 bcn_rssi_avg;
+ s16 bcn_nf_avg;
+ struct mwifiex_bssdescriptor *attempted_bss_desc;
+ struct mwifiex_802_11_ssid prev_ssid;
+ u8 prev_bssid[ETH_ALEN];
+ struct mwifiex_current_bss_params curr_bss_params;
+ u16 beacon_period;
+ u16 listen_interval;
+ u16 atim_window;
+ u8 adhoc_channel;
+ u8 adhoc_is_link_sensed;
+ u8 adhoc_state;
+ struct mwifiex_802_11_security sec_info;
+ struct mwifiex_wep_key wep_key[NUM_WEP_KEYS];
+ u16 wep_key_curr_index;
+ u8 wpa_ie[256];
+ u8 wpa_ie_len;
+ u8 wpa_is_gtk_set;
+ struct host_cmd_ds_802_11_key_material aes_key;
+ u8 wapi_ie[256];
+ u8 wapi_ie_len;
+ u8 wmm_required;
+ u8 wmm_enabled;
+ u8 wmm_qosinfo;
+ struct mwifiex_wmm_desc wmm;
+ struct list_head tx_ba_stream_tbl_ptr;
+ /* spin lock for tx_ba_stream_tbl_ptr queue */
+ spinlock_t tx_ba_stream_tbl_lock;
+ struct mwifiex_tx_aggr aggr_prio_tbl[MAX_NUM_TID];
+ struct mwifiex_add_ba_param add_ba_param;
+ u16 rx_seq[MAX_NUM_TID];
+ struct list_head rx_reorder_tbl_ptr;
+ /* spin lock for rx_reorder_tbl_ptr queue */
+ spinlock_t rx_reorder_tbl_lock;
+ /* spin lock for Rx packets */
+ spinlock_t rx_pkt_lock;
+
+#define MWIFIEX_ASSOC_RSP_BUF_SIZE 500
+ u8 assoc_rsp_buf[MWIFIEX_ASSOC_RSP_BUF_SIZE];
+ u32 assoc_rsp_size;
+
+#define MWIFIEX_GENIE_BUF_SIZE 256
+ u8 gen_ie_buf[MWIFIEX_GENIE_BUF_SIZE];
+ u8 gen_ie_buf_len;
+
+ struct mwifiex_vendor_spec_cfg_ie vs_ie[MWIFIEX_MAX_VSIE_NUM];
+
+#define MWIFIEX_ASSOC_TLV_BUF_SIZE 256
+ u8 assoc_tlv_buf[MWIFIEX_ASSOC_TLV_BUF_SIZE];
+ u8 assoc_tlv_buf_len;
+
+ u8 *curr_bcn_buf;
+ u32 curr_bcn_size;
+ /* spin lock for beacon buffer */
+ spinlock_t curr_bcn_buf_lock;
+ struct wireless_dev *wdev;
+ struct mwifiex_chan_freq_power cfp;
+ char version_str[128];
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dfs_dev_dir;
+#endif
+ u8 nick_name[16];
+ struct iw_statistics w_stats;
+ u16 current_key_index;
+ struct semaphore async_sem;
+ u8 scan_pending_on_block;
+ u8 report_scan_result;
+ struct cfg80211_scan_request *scan_request;
+ int scan_result_status;
+ int assoc_request;
+ u16 assoc_result;
+ int ibss_join_request;
+ u16 ibss_join_result;
+ bool disconnect;
+ u8 cfg_bssid[6];
+ struct workqueue_struct *workqueue;
+ struct work_struct cfg_workqueue;
+ u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
+ struct wps wps;
+ u8 scan_block;
+};
+
+enum mwifiex_ba_status {
+ BA_STREAM_NOT_SETUP = 0,
+ BA_STREAM_SETUP_INPROGRESS,
+ BA_STREAM_SETUP_COMPLETE
+};
+
+struct mwifiex_tx_ba_stream_tbl {
+ struct list_head list;
+ int tid;
+ u8 ra[ETH_ALEN];
+ enum mwifiex_ba_status ba_status;
+};
+
+struct mwifiex_rx_reorder_tbl;
+
+struct reorder_tmr_cnxt {
+ struct timer_list timer;
+ struct mwifiex_rx_reorder_tbl *ptr;
+ struct mwifiex_private *priv;
+};
+
+struct mwifiex_rx_reorder_tbl {
+ struct list_head list;
+ int tid;
+ u8 ta[ETH_ALEN];
+ int start_win;
+ int win_size;
+ void **rx_reorder_ptr;
+ struct reorder_tmr_cnxt timer_context;
+};
+
+struct mwifiex_bss_prio_node {
+ struct list_head list;
+ struct mwifiex_private *priv;
+};
+
+struct mwifiex_bss_prio_tbl {
+ struct list_head bss_prio_head;
+ /* spin lock for bss priority */
+ spinlock_t bss_prio_lock;
+ struct mwifiex_bss_prio_node *bss_prio_cur;
+};
+
+struct cmd_ctrl_node {
+ struct list_head list;
+ struct mwifiex_private *priv;
+ u32 cmd_oid;
+ u32 cmd_flag;
+ struct sk_buff *cmd_skb;
+ struct sk_buff *resp_skb;
+ void *data_buf;
+ u32 wait_q_enabled;
+ struct sk_buff *skb;
+};
+
+struct mwifiex_if_ops {
+ int (*init_if) (struct mwifiex_adapter *);
+ void (*cleanup_if) (struct mwifiex_adapter *);
+ int (*check_fw_status) (struct mwifiex_adapter *, u32, int *);
+ int (*prog_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *);
+ int (*register_dev) (struct mwifiex_adapter *);
+ void (*unregister_dev) (struct mwifiex_adapter *);
+ int (*enable_int) (struct mwifiex_adapter *);
+ int (*process_int_status) (struct mwifiex_adapter *);
+ int (*host_to_card) (struct mwifiex_adapter *, u8,
+ u8 *payload, u32 pkt_len,
+ struct mwifiex_tx_param *);
+ int (*wakeup) (struct mwifiex_adapter *);
+ int (*wakeup_complete) (struct mwifiex_adapter *);
+
+ void (*update_mp_end_port) (struct mwifiex_adapter *, u16);
+ void (*cleanup_mpa_buf) (struct mwifiex_adapter *);
+};
+
+struct mwifiex_adapter {
+ struct mwifiex_private *priv[MWIFIEX_MAX_BSS_NUM];
+ u8 priv_num;
+ struct mwifiex_drv_mode *drv_mode;
+ const struct firmware *firmware;
+ struct device *dev;
+ bool surprise_removed;
+ u32 fw_release_number;
+ u32 revision_id;
+ u16 init_wait_q_woken;
+ wait_queue_head_t init_wait_q;
+ void *card;
+ struct mwifiex_if_ops if_ops;
+ atomic_t rx_pending;
+ atomic_t tx_pending;
+ atomic_t cmd_pending;
+ struct workqueue_struct *workqueue;
+ struct work_struct main_work;
+ struct mwifiex_bss_prio_tbl bss_prio_tbl[MWIFIEX_MAX_BSS_NUM];
+ /* spin lock for init/shutdown */
+ spinlock_t mwifiex_lock;
+ /* spin lock for main process */
+ spinlock_t main_proc_lock;
+ u32 mwifiex_processing;
+ u16 max_tx_buf_size;
+ u16 tx_buf_size;
+ u16 curr_tx_buf_size;
+ u32 ioport;
+ enum MWIFIEX_HARDWARE_STATUS hw_status;
+ u16 number_of_antenna;
+ u32 fw_cap_info;
+ /* spin lock for interrupt handling */
+ spinlock_t int_lock;
+ u8 int_status;
+ u32 event_cause;
+ struct sk_buff *event_skb;
+ u8 upld_buf[MWIFIEX_UPLD_SIZE];
+ u8 data_sent;
+ u8 cmd_sent;
+ u8 cmd_resp_received;
+ u8 event_received;
+ u8 data_received;
+ u16 seq_num;
+ struct cmd_ctrl_node *cmd_pool;
+ struct cmd_ctrl_node *curr_cmd;
+ /* spin lock for command */
+ spinlock_t mwifiex_cmd_lock;
+ u32 num_cmd_timeout;
+ u16 last_init_cmd;
+ struct timer_list cmd_timer;
+ struct list_head cmd_free_q;
+ /* spin lock for cmd_free_q */
+ spinlock_t cmd_free_q_lock;
+ struct list_head cmd_pending_q;
+ /* spin lock for cmd_pending_q */
+ spinlock_t cmd_pending_q_lock;
+ struct list_head scan_pending_q;
+ /* spin lock for scan_pending_q */
+ spinlock_t scan_pending_q_lock;
+ u32 scan_processing;
+ u16 region_code;
+ struct mwifiex_802_11d_domain_reg domain_reg;
+ struct mwifiex_bssdescriptor *scan_table;
+ u32 num_in_scan_table;
+ u16 scan_probes;
+ u32 scan_mode;
+ u16 specific_scan_time;
+ u16 active_scan_time;
+ u16 passive_scan_time;
+ u8 bcn_buf[MAX_SCAN_BEACON_BUFFER];
+ u8 *bcn_buf_end;
+ u8 fw_bands;
+ u8 adhoc_start_band;
+ u8 config_bands;
+ struct mwifiex_chan_scan_param_set *scan_channels;
+ u8 tx_lock_flag;
+ struct mwifiex_sleep_params sleep_params;
+ struct mwifiex_sleep_period sleep_period;
+ u16 ps_mode;
+ u32 ps_state;
+ u8 need_to_wakeup;
+ u16 multiple_dtim;
+ u16 local_listen_interval;
+ u16 null_pkt_interval;
+ struct sk_buff *sleep_cfm;
+ u16 bcn_miss_time_out;
+ u16 adhoc_awake_period;
+ u8 is_deep_sleep;
+ u8 delay_null_pkt;
+ u16 delay_to_ps;
+ u16 enhanced_ps_mode;
+ u8 pm_wakeup_card_req;
+ u16 gen_null_pkt;
+ u16 pps_uapsd_mode;
+ u32 pm_wakeup_fw_try;
+ u8 is_hs_configured;
+ struct mwifiex_hs_config_param hs_cfg;
+ u8 hs_activated;
+ u16 hs_activate_wait_q_woken;
+ wait_queue_head_t hs_activate_wait_q;
+ bool is_suspended;
+ u8 event_body[MAX_EVENT_SIZE];
+ u32 hw_dot_11n_dev_cap;
+ u8 hw_dev_mcs_support;
+ u8 adhoc_11n_enabled;
+ u8 chan_offset;
+ struct mwifiex_dbg dbg;
+ u8 arp_filter[ARP_FILTER_MAX_BUF_SIZE];
+ u32 arp_filter_size;
+ u16 cmd_wait_q_required;
+ struct mwifiex_wait_queue cmd_wait_q;
+};
+
+int mwifiex_init_lock_list(struct mwifiex_adapter *adapter);
+void mwifiex_free_lock_list(struct mwifiex_adapter *adapter);
+
+int mwifiex_init_fw(struct mwifiex_adapter *adapter);
+
+int mwifiex_init_fw_complete(struct mwifiex_adapter *adapter);
+
+int mwifiex_shutdown_drv(struct mwifiex_adapter *adapter);
+
+int mwifiex_shutdown_fw_complete(struct mwifiex_adapter *adapter);
+
+int mwifiex_dnld_fw(struct mwifiex_adapter *, struct mwifiex_fw_image *);
+
+int mwifiex_recv_packet(struct mwifiex_adapter *, struct sk_buff *skb);
+
+int mwifiex_process_event(struct mwifiex_adapter *adapter);
+
+int mwifiex_complete_cmd(struct mwifiex_adapter *adapter);
+
+int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid, void *data_buf);
+
+int mwifiex_send_cmd_sync(struct mwifiex_private *priv, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid, void *data_buf);
+
+void mwifiex_cmd_timeout_func(unsigned long function_context);
+
+int mwifiex_get_debug_info(struct mwifiex_private *,
+ struct mwifiex_debug_info *);
+
+int mwifiex_alloc_cmd_buffer(struct mwifiex_adapter *adapter);
+int mwifiex_free_cmd_buffer(struct mwifiex_adapter *adapter);
+void mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter);
+void mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter);
+
+void mwifiex_insert_cmd_to_free_q(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_node);
+
+void mwifiex_insert_cmd_to_pending_q(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_node,
+ u32 addtail);
+
+int mwifiex_exec_next_cmd(struct mwifiex_adapter *adapter);
+int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter);
+int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb);
+int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb,
+ struct mwifiex_tx_param *tx_param);
+int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags);
+int mwifiex_write_data_complete(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb, int status);
+int mwifiex_recv_packet_complete(struct mwifiex_adapter *,
+ struct sk_buff *skb, int status);
+void mwifiex_clean_txrx(struct mwifiex_private *priv);
+u8 mwifiex_check_last_packet_indication(struct mwifiex_private *priv);
+void mwifiex_check_ps_cond(struct mwifiex_adapter *adapter);
+void mwifiex_process_sleep_confirm_resp(struct mwifiex_adapter *, u8 *,
+ u32);
+int mwifiex_cmd_enh_power_mode(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action, uint16_t ps_bitmap,
+ void *data_buf);
+int mwifiex_ret_enh_power_mode(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf);
+void mwifiex_process_hs_config(struct mwifiex_adapter *adapter);
+void mwifiex_hs_activated_event(struct mwifiex_private *priv,
+ u8 activated);
+int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb);
+int mwifiex_sta_prepare_cmd(struct mwifiex_private *, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid,
+ void *data_buf, void *cmd_buf);
+int mwifiex_process_sta_cmdresp(struct mwifiex_private *, u16 cmdresp_no,
+ void *cmd_buf);
+int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *,
+ struct sk_buff *skb);
+int mwifiex_process_sta_event(struct mwifiex_private *);
+void *mwifiex_process_sta_txpd(struct mwifiex_private *, struct sk_buff *skb);
+int mwifiex_sta_init_cmd(struct mwifiex_private *, u8 first_sta);
+int mwifiex_scan_networks(struct mwifiex_private *priv,
+ const struct mwifiex_user_scan_cfg *user_scan_in);
+int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command *cmd,
+ void *data_buf);
+void mwifiex_queue_scan_cmd(struct mwifiex_private *priv,
+ struct cmd_ctrl_node *cmd_node);
+int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+s32 mwifiex_find_ssid_in_list(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *ssid, u8 *bssid,
+ u32 mode);
+s32 mwifiex_find_bssid_in_list(struct mwifiex_private *priv, u8 *bssid,
+ u32 mode);
+int mwifiex_find_best_network(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *req_ssid_bssid);
+s32 mwifiex_ssid_cmp(struct mwifiex_802_11_ssid *ssid1,
+ struct mwifiex_802_11_ssid *ssid2);
+int mwifiex_associate(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc);
+int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv,
+ struct host_cmd_ds_command
+ *cmd, void *data_buf);
+int mwifiex_ret_802_11_associate(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+void mwifiex_reset_connect_state(struct mwifiex_private *priv);
+void mwifiex_2040_coex_event(struct mwifiex_private *priv);
+u8 mwifiex_band_to_radio_type(u8 band);
+int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac);
+int mwifiex_adhoc_start(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *adhoc_ssid);
+int mwifiex_adhoc_join(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc);
+int mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ void *data_buf);
+int mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ void *data_buf);
+int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command *cmd);
+struct mwifiex_chan_freq_power *
+ mwifiex_get_cfp_by_band_and_channel_from_cfg80211(
+ struct mwifiex_private *priv,
+ u8 band, u16 channel);
+struct mwifiex_chan_freq_power *mwifiex_get_cfp_by_band_and_freq_from_cfg80211(
+ struct mwifiex_private *priv,
+ u8 band, u32 freq);
+u32 mwifiex_index_to_data_rate(u8 index, u8 ht_info);
+u32 mwifiex_find_freq_from_band_chan(u8, u8);
+int mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv, u16 vsie_mask,
+ u8 **buffer);
+u32 mwifiex_get_active_data_rates(struct mwifiex_private *priv,
+ u8 *rates);
+u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates);
+u8 mwifiex_data_rate_to_index(u32 rate);
+u8 mwifiex_is_rate_auto(struct mwifiex_private *priv);
+int mwifiex_get_rate_index(u16 *rateBitmap, int size);
+extern u16 region_code_index[MWIFIEX_MAX_REGION_CODE];
+void mwifiex_save_curr_bcn(struct mwifiex_private *priv);
+void mwifiex_free_curr_bcn(struct mwifiex_private *priv);
+int mwifiex_cmd_get_hw_spec(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd);
+int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp);
+int is_command_pending(struct mwifiex_adapter *adapter);
+
+/*
+ * This function checks if the queuing is RA based or not.
+ */
+static inline u8
+mwifiex_queuing_ra_based(struct mwifiex_private *priv)
+{
+ /*
+ * Currently we assume if we are in Infra, then DA=RA. This might not be
+ * true in the future
+ */
+ if ((priv->bss_mode == NL80211_IFTYPE_STATION) &&
+ (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA))
+ return false;
+
+ return true;
+}
+
+/*
+ * This function copies rates.
+ */
+static inline u32
+mwifiex_copy_rates(u8 *dest, u32 pos, u8 *src, int len)
+{
+ int i;
+
+ for (i = 0; i < len && src[i]; i++, pos++) {
+ if (pos >= MWIFIEX_SUPPORTED_RATES)
+ break;
+ dest[pos] = src[i];
+ }
+
+ return pos;
+}
+
+/*
+ * This function returns the correct private structure pointer based
+ * upon the BSS type and BSS number.
+ */
+static inline struct mwifiex_private *
+mwifiex_get_priv_by_id(struct mwifiex_adapter *adapter,
+ u8 bss_num, u8 bss_type)
+{
+ int i;
+
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ if ((adapter->priv[i]->bss_num == bss_num)
+ && (adapter->priv[i]->bss_type == bss_type))
+ break;
+ }
+ }
+ return ((i < adapter->priv_num) ? adapter->priv[i] : NULL);
+}
+
+/*
+ * This function returns the first available private structure pointer
+ * based upon the BSS role.
+ */
+static inline struct mwifiex_private *
+mwifiex_get_priv(struct mwifiex_adapter *adapter,
+ enum mwifiex_bss_role bss_role)
+{
+ int i;
+
+ for (i = 0; i < adapter->priv_num; i++) {
+ if (adapter->priv[i]) {
+ if (bss_role == MWIFIEX_BSS_ROLE_ANY ||
+ GET_BSS_ROLE(adapter->priv[i]) == bss_role)
+ break;
+ }
+ }
+
+ return ((i < adapter->priv_num) ? adapter->priv[i] : NULL);
+}
+
+/*
+ * This function returns the driver private structure of a network device.
+ */
+static inline struct mwifiex_private *
+mwifiex_netdev_get_priv(struct net_device *dev)
+{
+ return (struct mwifiex_private *) (*(unsigned long *) netdev_priv(dev));
+}
+
+struct mwifiex_private *mwifiex_bss_index_to_priv(struct mwifiex_adapter
+ *adapter, u8 bss_index);
+int mwifiex_init_shutdown_fw(struct mwifiex_private *priv,
+ u32 func_init_shutdown);
+int mwifiex_add_card(void *, struct semaphore *, struct mwifiex_if_ops *);
+int mwifiex_remove_card(struct mwifiex_adapter *, struct semaphore *);
+
+void mwifiex_get_version(struct mwifiex_adapter *adapter, char *version,
+ int maxlen);
+int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
+ struct mwifiex_multicast_list *mcast_list);
+int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
+ struct net_device *dev);
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter);
+int mwifiex_bss_start(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *ssid_bssid);
+int mwifiex_set_hs_params(struct mwifiex_private *priv,
+ u16 action, int cmd_type,
+ struct mwifiex_ds_hs_cfg *hscfg);
+int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type);
+int mwifiex_enable_hs(struct mwifiex_adapter *adapter);
+int mwifiex_get_signal_info(struct mwifiex_private *priv,
+ struct mwifiex_ds_get_signal *signal);
+int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
+ struct mwifiex_rate_cfg *rate);
+int mwifiex_find_best_bss(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *ssid_bssid);
+int mwifiex_request_scan(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *req_ssid);
+int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv,
+ struct mwifiex_user_scan_cfg *scan_req);
+int mwifiex_change_adhoc_chan(struct mwifiex_private *priv, int channel);
+int mwifiex_set_radio(struct mwifiex_private *priv, u8 option);
+
+int mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel);
+
+int mwifiex_set_encode(struct mwifiex_private *priv, const u8 *key,
+ int key_len, u8 key_index, int disable);
+
+int mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len);
+
+int mwifiex_get_ver_ext(struct mwifiex_private *priv);
+
+int mwifiex_get_stats_info(struct mwifiex_private *priv,
+ struct mwifiex_ds_get_stats *log);
+
+int mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
+ u32 reg_offset, u32 reg_value);
+
+int mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
+ u32 reg_offset, u32 *value);
+
+int mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
+ u8 *value);
+
+int mwifiex_set_11n_httx_cfg(struct mwifiex_private *priv, int data);
+
+int mwifiex_get_11n_httx_cfg(struct mwifiex_private *priv, int *data);
+
+int mwifiex_set_tx_rate_cfg(struct mwifiex_private *priv, int tx_rate_index);
+
+int mwifiex_get_tx_rate_cfg(struct mwifiex_private *priv, int *tx_rate_index);
+
+int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode);
+
+int mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter,
+ char *version, int max_len);
+
+int mwifiex_set_tx_power(struct mwifiex_private *priv,
+ struct mwifiex_power_cfg *power_cfg);
+
+int mwifiex_main_process(struct mwifiex_adapter *);
+
+int mwifiex_bss_set_channel(struct mwifiex_private *,
+ struct mwifiex_chan_freq_power *cfp);
+int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *,
+ struct mwifiex_ssid_bssid *);
+int mwifiex_set_radio_band_cfg(struct mwifiex_private *,
+ struct mwifiex_ds_band_cfg *);
+int mwifiex_get_bss_info(struct mwifiex_private *,
+ struct mwifiex_bss_info *);
+
+#ifdef CONFIG_DEBUG_FS
+void mwifiex_debugfs_init(void);
+void mwifiex_debugfs_remove(void);
+
+void mwifiex_dev_debugfs_init(struct mwifiex_private *priv);
+void mwifiex_dev_debugfs_remove(struct mwifiex_private *priv);
+#endif
+#endif /* !_MWIFIEX_MAIN_H_ */
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
new file mode 100644
index 0000000..5c22860
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -0,0 +1,3025 @@
+/*
+ * Marvell Wireless LAN device driver: scan ioctl and command handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "11n.h"
+#include "cfg80211.h"
+
+/* The maximum number of channels the firmware can scan per command */
+#define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN 14
+
+#define MWIFIEX_CHANNELS_PER_SCAN_CMD 4
+
+/* Memory needed to store a max sized Channel List TLV for a firmware scan */
+#define CHAN_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_header) \
+ + (MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN \
+ *sizeof(struct mwifiex_chan_scan_param_set)))
+
+/* Memory needed to store supported rate */
+#define RATE_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_rates_param_set) \
+ + HOSTCMD_SUPPORTED_RATES)
+
+/* Memory needed to store a max number/size WildCard SSID TLV for a firmware
+ scan */
+#define WILDCARD_SSID_TLV_MAX_SIZE \
+ (MWIFIEX_MAX_SSID_LIST_LENGTH * \
+ (sizeof(struct mwifiex_ie_types_wildcard_ssid_params) \
+ + IEEE80211_MAX_SSID_LEN))
+
+/* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */
+#define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config) \
+ + sizeof(struct mwifiex_ie_types_num_probes) \
+ + sizeof(struct mwifiex_ie_types_htcap) \
+ + CHAN_TLV_MAX_SIZE \
+ + RATE_TLV_MAX_SIZE \
+ + WILDCARD_SSID_TLV_MAX_SIZE)
+
+
+union mwifiex_scan_cmd_config_tlv {
+ /* Scan configuration (variable length) */
+ struct mwifiex_scan_cmd_config config;
+ /* Max allocated block */
+ u8 config_alloc_buf[MAX_SCAN_CFG_ALLOC];
+};
+
+enum cipher_suite {
+ CIPHER_SUITE_TKIP,
+ CIPHER_SUITE_CCMP,
+ CIPHER_SUITE_MAX
+};
+static u8 mwifiex_wpa_oui[CIPHER_SUITE_MAX][4] = {
+ { 0x00, 0x50, 0xf2, 0x02 }, /* TKIP */
+ { 0x00, 0x50, 0xf2, 0x04 }, /* AES */
+};
+static u8 mwifiex_rsn_oui[CIPHER_SUITE_MAX][4] = {
+ { 0x00, 0x0f, 0xac, 0x02 }, /* TKIP */
+ { 0x00, 0x0f, 0xac, 0x04 }, /* AES */
+};
+
+/*
+ * This function parses a given IE for a given OUI.
+ *
+ * This is used to parse a WPA/RSN IE to find if it has
+ * a given oui in PTK.
+ */
+static u8
+mwifiex_search_oui_in_ie(struct ie_body *iebody, u8 *oui)
+{
+ u8 count;
+
+ count = iebody->ptk_cnt[0];
+
+ /* There could be multiple OUIs for PTK hence
+ 1) Take the length.
+ 2) Check all the OUIs for AES.
+ 3) If one of them is AES then pass success. */
+ while (count) {
+ if (!memcmp(iebody->ptk_body, oui, sizeof(iebody->ptk_body)))
+ return MWIFIEX_OUI_PRESENT;
+
+ --count;
+ if (count)
+ iebody = (struct ie_body *) ((u8 *) iebody +
+ sizeof(iebody->ptk_body));
+ }
+
+ pr_debug("info: %s: OUI is not found in PTK\n", __func__);
+ return MWIFIEX_OUI_NOT_PRESENT;
+}
+
+/*
+ * This function checks if a given OUI is present in a RSN IE.
+ *
+ * The function first checks if a RSN IE is present or not in the
+ * BSS descriptor. It tries to locate the OUI only if such an IE is
+ * present.
+ */
+static u8
+mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
+{
+ u8 *oui;
+ struct ie_body *iebody;
+ u8 ret = MWIFIEX_OUI_NOT_PRESENT;
+
+ if (((bss_desc->bcn_rsn_ie) && ((*(bss_desc->bcn_rsn_ie)).
+ ieee_hdr.element_id == WLAN_EID_RSN))) {
+ iebody = (struct ie_body *)
+ (((u8 *) bss_desc->bcn_rsn_ie->data) +
+ RSN_GTK_OUI_OFFSET);
+ oui = &mwifiex_rsn_oui[cipher][0];
+ ret = mwifiex_search_oui_in_ie(iebody, oui);
+ if (ret)
+ return ret;
+ }
+ return ret;
+}
+
+/*
+ * This function checks if a given OUI is present in a WPA IE.
+ *
+ * The function first checks if a WPA IE is present or not in the
+ * BSS descriptor. It tries to locate the OUI only if such an IE is
+ * present.
+ */
+static u8
+mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
+{
+ u8 *oui;
+ struct ie_body *iebody;
+ u8 ret = MWIFIEX_OUI_NOT_PRESENT;
+
+ if (((bss_desc->bcn_wpa_ie) && ((*(bss_desc->bcn_wpa_ie)).
+ vend_hdr.element_id == WLAN_EID_WPA))) {
+ iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data;
+ oui = &mwifiex_wpa_oui[cipher][0];
+ ret = mwifiex_search_oui_in_ie(iebody, oui);
+ if (ret)
+ return ret;
+ }
+ return ret;
+}
+
+/*
+ * This function compares two SSIDs and checks if they match.
+ */
+s32
+mwifiex_ssid_cmp(struct mwifiex_802_11_ssid *ssid1,
+ struct mwifiex_802_11_ssid *ssid2)
+{
+ if (!ssid1 || !ssid2 || (ssid1->ssid_len != ssid2->ssid_len))
+ return -1;
+ return memcmp(ssid1->ssid, ssid2->ssid, ssid1->ssid_len);
+}
+
+/*
+ * Sends IOCTL request to get the best BSS.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int mwifiex_find_best_bss(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *ssid_bssid)
+{
+ struct mwifiex_ssid_bssid tmp_ssid_bssid;
+ u8 *mac;
+
+ if (!ssid_bssid)
+ return -1;
+
+ memcpy(&tmp_ssid_bssid, ssid_bssid,
+ sizeof(struct mwifiex_ssid_bssid));
+
+ if (!mwifiex_bss_ioctl_find_bss(priv, &tmp_ssid_bssid)) {
+ memcpy(ssid_bssid, &tmp_ssid_bssid,
+ sizeof(struct mwifiex_ssid_bssid));
+ mac = (u8 *) &ssid_bssid->bssid;
+ dev_dbg(priv->adapter->dev, "cmd: found network: ssid=%s,"
+ " %pM\n", ssid_bssid->ssid.ssid, mac);
+ return 0;
+ }
+
+ return -1;
+}
+
+/*
+ * Sends IOCTL request to start a scan with user configurations.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ *
+ * Upon completion, it also generates a wireless event to notify
+ * applications.
+ */
+int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv,
+ struct mwifiex_user_scan_cfg *scan_req)
+{
+ int status;
+
+ priv->adapter->cmd_wait_q.condition = false;
+
+ status = mwifiex_scan_networks(priv, scan_req);
+ if (!status)
+ status = mwifiex_wait_queue_complete(priv->adapter);
+
+ return status;
+}
+
+/*
+ * This function checks if wapi is enabled in driver and scanned network is
+ * compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_wapi(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ if (priv->sec_info.wapi_enabled &&
+ (bss_desc->bcn_wapi_ie &&
+ ((*(bss_desc->bcn_wapi_ie)).ieee_hdr.element_id ==
+ WLAN_EID_BSS_AC_ACCESS_DELAY))) {
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if driver is configured with no security mode and
+ * scanned network is compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_no_sec(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED
+ && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled
+ && ((!bss_desc->bcn_wpa_ie) ||
+ ((*(bss_desc->bcn_wpa_ie)).vend_hdr.element_id !=
+ WLAN_EID_WPA))
+ && ((!bss_desc->bcn_rsn_ie) ||
+ ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id !=
+ WLAN_EID_RSN))
+ && !priv->sec_info.encryption_mode
+ && !bss_desc->privacy) {
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if static WEP is enabled in driver and scanned network
+ * is compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_static_wep(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED
+ && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled
+ && bss_desc->privacy) {
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if wpa is enabled in driver and scanned network is
+ * compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_wpa(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc,
+ int index)
+{
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED
+ && priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled
+ && ((bss_desc->bcn_wpa_ie) && ((*(bss_desc->bcn_wpa_ie)).vend_hdr.
+ element_id == WLAN_EID_WPA))
+ /*
+ * Privacy bit may NOT be set in some APs like
+ * LinkSys WRT54G && bss_desc->privacy
+ */
+ ) {
+ dev_dbg(priv->adapter->dev, "info: %s: WPA: index=%d"
+ " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
+ "EncMode=%#x privacy=%#x\n", __func__, index,
+ (bss_desc->bcn_wpa_ie) ?
+ (*(bss_desc->bcn_wpa_ie)).
+ vend_hdr.element_id : 0,
+ (bss_desc->bcn_rsn_ie) ?
+ (*(bss_desc->bcn_rsn_ie)).
+ ieee_hdr.element_id : 0,
+ (priv->sec_info.wep_status ==
+ MWIFIEX_802_11_WEP_ENABLED) ? "e" : "d",
+ (priv->sec_info.wpa_enabled) ? "e" : "d",
+ (priv->sec_info.wpa2_enabled) ? "e" : "d",
+ priv->sec_info.encryption_mode,
+ bss_desc->privacy);
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if wpa2 is enabled in driver and scanned network is
+ * compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_wpa2(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc,
+ int index)
+{
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED
+ && !priv->sec_info.wpa_enabled && priv->sec_info.wpa2_enabled
+ && ((bss_desc->bcn_rsn_ie) && ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.
+ element_id == WLAN_EID_RSN))
+ /*
+ * Privacy bit may NOT be set in some APs like
+ * LinkSys WRT54G && bss_desc->privacy
+ */
+ ) {
+ dev_dbg(priv->adapter->dev, "info: %s: WPA2: index=%d"
+ " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
+ "EncMode=%#x privacy=%#x\n", __func__, index,
+ (bss_desc->bcn_wpa_ie) ?
+ (*(bss_desc->bcn_wpa_ie)).
+ vend_hdr.element_id : 0,
+ (bss_desc->bcn_rsn_ie) ?
+ (*(bss_desc->bcn_rsn_ie)).
+ ieee_hdr.element_id : 0,
+ (priv->sec_info.wep_status ==
+ MWIFIEX_802_11_WEP_ENABLED) ? "e" : "d",
+ (priv->sec_info.wpa_enabled) ? "e" : "d",
+ (priv->sec_info.wpa2_enabled) ? "e" : "d",
+ priv->sec_info.encryption_mode,
+ bss_desc->privacy);
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if adhoc AES is enabled in driver and scanned network is
+ * compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_adhoc_aes(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc)
+{
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED
+ && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled
+ && ((!bss_desc->bcn_wpa_ie) || ((*(bss_desc->bcn_wpa_ie)).vend_hdr.
+ element_id != WLAN_EID_WPA))
+ && ((!bss_desc->bcn_rsn_ie) || ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.
+ element_id != WLAN_EID_RSN))
+ && !priv->sec_info.encryption_mode
+ && bss_desc->privacy) {
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if dynamic WEP is enabled in driver and scanned network
+ * is compatible with it.
+ */
+static bool
+mwifiex_is_network_compatible_for_dynamic_wep(struct mwifiex_private *priv,
+ struct mwifiex_bssdescriptor *bss_desc,
+ int index)
+{
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED
+ && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled
+ && ((!bss_desc->bcn_wpa_ie) || ((*(bss_desc->bcn_wpa_ie)).vend_hdr.
+ element_id != WLAN_EID_WPA))
+ && ((!bss_desc->bcn_rsn_ie) || ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.
+ element_id != WLAN_EID_RSN))
+ && priv->sec_info.encryption_mode
+ && bss_desc->privacy) {
+ dev_dbg(priv->adapter->dev, "info: %s: dynamic "
+ "WEP: index=%d wpa_ie=%#x wpa2_ie=%#x "
+ "EncMode=%#x privacy=%#x\n",
+ __func__, index,
+ (bss_desc->bcn_wpa_ie) ?
+ (*(bss_desc->bcn_wpa_ie)).
+ vend_hdr.element_id : 0,
+ (bss_desc->bcn_rsn_ie) ?
+ (*(bss_desc->bcn_rsn_ie)).
+ ieee_hdr.element_id : 0,
+ priv->sec_info.encryption_mode,
+ bss_desc->privacy);
+ return true;
+ }
+ return false;
+}
+
+/*
+ * This function checks if a scanned network is compatible with the driver
+ * settings.
+ *
+ * WEP WPA WPA2 ad-hoc encrypt Network
+ * enabled enabled enabled AES mode Privacy WPA WPA2 Compatible
+ * 0 0 0 0 NONE 0 0 0 yes No security
+ * 0 1 0 0 x 1x 1 x yes WPA (disable
+ * HT if no AES)
+ * 0 0 1 0 x 1x x 1 yes WPA2 (disable
+ * HT if no AES)
+ * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES
+ * 1 0 0 0 NONE 1 0 0 yes Static WEP
+ * (disable HT)
+ * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP
+ *
+ * Compatibility is not matched while roaming, except for mode.
+ */
+static s32
+mwifiex_is_network_compatible(struct mwifiex_private *priv, u32 index, u32 mode)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bssdescriptor *bss_desc;
+
+ bss_desc = &adapter->scan_table[index];
+ bss_desc->disable_11n = false;
+
+ /* Don't check for compatibility if roaming */
+ if (priv->media_connected && (priv->bss_mode == NL80211_IFTYPE_STATION)
+ && (bss_desc->bss_mode == NL80211_IFTYPE_STATION))
+ return index;
+
+ if (priv->wps.session_enable) {
+ dev_dbg(adapter->dev,
+ "info: return success directly in WPS period\n");
+ return index;
+ }
+
+ if (mwifiex_is_network_compatible_for_wapi(priv, bss_desc)) {
+ dev_dbg(adapter->dev, "info: return success for WAPI AP\n");
+ return index;
+ }
+
+ if (bss_desc->bss_mode == mode) {
+ if (mwifiex_is_network_compatible_for_no_sec(priv, bss_desc)) {
+ /* No security */
+ return index;
+ } else if (mwifiex_is_network_compatible_for_static_wep(priv,
+ bss_desc)) {
+ /* Static WEP enabled */
+ dev_dbg(adapter->dev, "info: Disable 11n in WEP mode.\n");
+ bss_desc->disable_11n = true;
+ return index;
+ } else if (mwifiex_is_network_compatible_for_wpa(priv, bss_desc,
+ index)) {
+ /* WPA enabled */
+ if (((priv->adapter->config_bands & BAND_GN
+ || priv->adapter->config_bands & BAND_AN)
+ && bss_desc->bcn_ht_cap)
+ && !mwifiex_is_wpa_oui_present(bss_desc,
+ CIPHER_SUITE_CCMP)) {
+
+ if (mwifiex_is_wpa_oui_present(bss_desc,
+ CIPHER_SUITE_TKIP)) {
+ dev_dbg(adapter->dev,
+ "info: Disable 11n if AES "
+ "is not supported by AP\n");
+ bss_desc->disable_11n = true;
+ } else {
+ return -1;
+ }
+ }
+ return index;
+ } else if (mwifiex_is_network_compatible_for_wpa2(priv,
+ bss_desc, index)) {
+ /* WPA2 enabled */
+ if (((priv->adapter->config_bands & BAND_GN
+ || priv->adapter->config_bands & BAND_AN)
+ && bss_desc->bcn_ht_cap)
+ && !mwifiex_is_rsn_oui_present(bss_desc,
+ CIPHER_SUITE_CCMP)) {
+
+ if (mwifiex_is_rsn_oui_present(bss_desc,
+ CIPHER_SUITE_TKIP)) {
+ dev_dbg(adapter->dev,
+ "info: Disable 11n if AES "
+ "is not supported by AP\n");
+ bss_desc->disable_11n = true;
+ } else {
+ return -1;
+ }
+ }
+ return index;
+ } else if (mwifiex_is_network_compatible_for_adhoc_aes(priv,
+ bss_desc)) {
+ /* Ad-hoc AES enabled */
+ return index;
+ } else if (mwifiex_is_network_compatible_for_dynamic_wep(priv,
+ bss_desc, index)) {
+ /* Dynamic WEP enabled */
+ return index;
+ }
+
+ /* Security doesn't match */
+ dev_dbg(adapter->dev, "info: %s: failed: index=%d "
+ "wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s EncMode"
+ "=%#x privacy=%#x\n",
+ __func__, index,
+ (bss_desc->bcn_wpa_ie) ?
+ (*(bss_desc->bcn_wpa_ie)).vend_hdr.
+ element_id : 0,
+ (bss_desc->bcn_rsn_ie) ?
+ (*(bss_desc->bcn_rsn_ie)).ieee_hdr.
+ element_id : 0,
+ (priv->sec_info.wep_status ==
+ MWIFIEX_802_11_WEP_ENABLED) ? "e" : "d",
+ (priv->sec_info.wpa_enabled) ? "e" : "d",
+ (priv->sec_info.wpa2_enabled) ? "e" : "d",
+ priv->sec_info.encryption_mode, bss_desc->privacy);
+ return -1;
+ }
+
+ /* Mode doesn't match */
+ return -1;
+}
+
+/*
+ * This function finds the best SSID in the scan list.
+ *
+ * It searches the scan table for the best SSID that also matches the current
+ * adapter network preference (mode, security etc.).
+ */
+static s32
+mwifiex_find_best_network_in_list(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u32 mode = priv->bss_mode;
+ s32 best_net = -1;
+ s32 best_rssi = 0;
+ u32 i;
+
+ dev_dbg(adapter->dev, "info: num of BSSIDs = %d\n",
+ adapter->num_in_scan_table);
+
+ for (i = 0; i < adapter->num_in_scan_table; i++) {
+ switch (mode) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ if (mwifiex_is_network_compatible(priv, i, mode) >= 0) {
+ if (SCAN_RSSI(adapter->scan_table[i].rssi) >
+ best_rssi) {
+ best_rssi = SCAN_RSSI(adapter->
+ scan_table[i].rssi);
+ best_net = i;
+ }
+ }
+ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ default:
+ if (SCAN_RSSI(adapter->scan_table[i].rssi) >
+ best_rssi) {
+ best_rssi = SCAN_RSSI(adapter->scan_table[i].
+ rssi);
+ best_net = i;
+ }
+ break;
+ }
+ }
+
+ return best_net;
+}
+
+/*
+ * This function creates a channel list for the driver to scan, based
+ * on region/band information.
+ *
+ * This routine is used for any scan that is not provided with a
+ * specific channel list to scan.
+ */
+static void
+mwifiex_scan_create_channel_list(struct mwifiex_private *priv,
+ const struct mwifiex_user_scan_cfg
+ *user_scan_in,
+ struct mwifiex_chan_scan_param_set
+ *scan_chan_list,
+ u8 filtered_scan)
+{
+ enum ieee80211_band band;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *ch;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int chan_idx = 0, i;
+ u8 scan_type;
+
+ for (band = 0; (band < IEEE80211_NUM_BANDS) ; band++) {
+
+ if (!priv->wdev->wiphy->bands[band])
+ continue;
+
+ sband = priv->wdev->wiphy->bands[band];
+
+ for (i = 0; (i < sband->n_channels) ; i++, chan_idx++) {
+ ch = &sband->channels[i];
+ if (ch->flags & IEEE80211_CHAN_DISABLED)
+ continue;
+ scan_chan_list[chan_idx].radio_type = band;
+ scan_type = ch->flags & IEEE80211_CHAN_PASSIVE_SCAN;
+ if (user_scan_in &&
+ user_scan_in->chan_list[0].scan_time)
+ scan_chan_list[chan_idx].max_scan_time =
+ cpu_to_le16((u16) user_scan_in->
+ chan_list[0].scan_time);
+ else if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
+ scan_chan_list[chan_idx].max_scan_time =
+ cpu_to_le16(adapter->passive_scan_time);
+ else
+ scan_chan_list[chan_idx].max_scan_time =
+ cpu_to_le16(adapter->active_scan_time);
+ if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
+ scan_chan_list[chan_idx].chan_scan_mode_bitmap
+ |= MWIFIEX_PASSIVE_SCAN;
+ else
+ scan_chan_list[chan_idx].chan_scan_mode_bitmap
+ &= ~MWIFIEX_PASSIVE_SCAN;
+ scan_chan_list[chan_idx].chan_number =
+ (u32) ch->hw_value;
+ if (filtered_scan) {
+ scan_chan_list[chan_idx].max_scan_time =
+ cpu_to_le16(adapter->specific_scan_time);
+ scan_chan_list[chan_idx].chan_scan_mode_bitmap
+ |= MWIFIEX_DISABLE_CHAN_FILT;
+ }
+ }
+
+ }
+}
+
+/*
+ * This function constructs and sends multiple scan config commands to
+ * the firmware.
+ *
+ * Previous routines in the code flow have created a scan command configuration
+ * with any requested TLVs. This function splits the channel TLV into maximum
+ * channels supported per scan lists and sends the portion of the channel TLV,
+ * along with the other TLVs, to the firmware.
+ */
+static int
+mwifiex_scan_channel_list(struct mwifiex_private *priv,
+ u32 max_chan_per_scan, u8 filtered_scan,
+ struct mwifiex_scan_cmd_config *scan_cfg_out,
+ struct mwifiex_ie_types_chan_list_param_set
+ *chan_tlv_out,
+ struct mwifiex_chan_scan_param_set *scan_chan_list)
+{
+ int ret = 0;
+ struct mwifiex_chan_scan_param_set *tmp_chan_list;
+ struct mwifiex_chan_scan_param_set *start_chan;
+
+ u32 tlv_idx;
+ u32 total_scan_time;
+ u32 done_early;
+
+ if (!scan_cfg_out || !chan_tlv_out || !scan_chan_list) {
+ dev_dbg(priv->adapter->dev,
+ "info: Scan: Null detect: %p, %p, %p\n",
+ scan_cfg_out, chan_tlv_out, scan_chan_list);
+ return -1;
+ }
+
+ chan_tlv_out->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
+
+ /* Set the temp channel struct pointer to the start of the desired
+ list */
+ tmp_chan_list = scan_chan_list;
+
+ /* Loop through the desired channel list, sending a new firmware scan
+ commands for each max_chan_per_scan channels (or for 1,6,11
+ individually if configured accordingly) */
+ while (tmp_chan_list->chan_number) {
+
+ tlv_idx = 0;
+ total_scan_time = 0;
+ chan_tlv_out->header.len = 0;
+ start_chan = tmp_chan_list;
+ done_early = false;
+
+ /*
+ * Construct the Channel TLV for the scan command. Continue to
+ * insert channel TLVs until:
+ * - the tlv_idx hits the maximum configured per scan command
+ * - the next channel to insert is 0 (end of desired channel
+ * list)
+ * - done_early is set (controlling individual scanning of
+ * 1,6,11)
+ */
+ while (tlv_idx < max_chan_per_scan
+ && tmp_chan_list->chan_number && !done_early) {
+
+ dev_dbg(priv->adapter->dev,
+ "info: Scan: Chan(%3d), Radio(%d),"
+ " Mode(%d, %d), Dur(%d)\n",
+ tmp_chan_list->chan_number,
+ tmp_chan_list->radio_type,
+ tmp_chan_list->chan_scan_mode_bitmap
+ & MWIFIEX_PASSIVE_SCAN,
+ (tmp_chan_list->chan_scan_mode_bitmap
+ & MWIFIEX_DISABLE_CHAN_FILT) >> 1,
+ le16_to_cpu(tmp_chan_list->max_scan_time));
+
+ /* Copy the current channel TLV to the command being
+ prepared */
+ memcpy(chan_tlv_out->chan_scan_param + tlv_idx,
+ tmp_chan_list,
+ sizeof(chan_tlv_out->chan_scan_param));
+
+ /* Increment the TLV header length by the size
+ appended */
+ chan_tlv_out->header.len =
+ cpu_to_le16(le16_to_cpu(chan_tlv_out->header.len) +
+ (sizeof(chan_tlv_out->chan_scan_param)));
+
+ /*
+ * The tlv buffer length is set to the number of bytes
+ * of the between the channel tlv pointer and the start
+ * of the tlv buffer. This compensates for any TLVs
+ * that were appended before the channel list.
+ */
+ scan_cfg_out->tlv_buf_len = (u32) ((u8 *) chan_tlv_out -
+ scan_cfg_out->tlv_buf);
+
+ /* Add the size of the channel tlv header and the data
+ length */
+ scan_cfg_out->tlv_buf_len +=
+ (sizeof(chan_tlv_out->header)
+ + le16_to_cpu(chan_tlv_out->header.len));
+
+ /* Increment the index to the channel tlv we are
+ constructing */
+ tlv_idx++;
+
+ /* Count the total scan time per command */
+ total_scan_time +=
+ le16_to_cpu(tmp_chan_list->max_scan_time);
+
+ done_early = false;
+
+ /* Stop the loop if the *current* channel is in the
+ 1,6,11 set and we are not filtering on a BSSID
+ or SSID. */
+ if (!filtered_scan && (tmp_chan_list->chan_number == 1
+ || tmp_chan_list->chan_number == 6
+ || tmp_chan_list->chan_number == 11))
+ done_early = true;
+
+ /* Increment the tmp pointer to the next channel to
+ be scanned */
+ tmp_chan_list++;
+
+ /* Stop the loop if the *next* channel is in the 1,6,11
+ set. This will cause it to be the only channel
+ scanned on the next interation */
+ if (!filtered_scan && (tmp_chan_list->chan_number == 1
+ || tmp_chan_list->chan_number == 6
+ || tmp_chan_list->chan_number == 11))
+ done_early = true;
+ }
+
+ /* The total scan time should be less than scan command timeout
+ value */
+ if (total_scan_time > MWIFIEX_MAX_TOTAL_SCAN_TIME) {
+ dev_err(priv->adapter->dev, "total scan time %dms"
+ " is over limit (%dms), scan skipped\n",
+ total_scan_time, MWIFIEX_MAX_TOTAL_SCAN_TIME);
+ ret = -1;
+ break;
+ }
+
+ priv->adapter->scan_channels = start_chan;
+
+ /* Send the scan command to the firmware with the specified
+ cfg */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11_SCAN,
+ HostCmd_ACT_GEN_SET, 0,
+ scan_cfg_out);
+ if (ret)
+ break;
+ }
+
+ if (ret)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * This function constructs a scan command configuration structure to use
+ * in scan commands.
+ *
+ * Application layer or other functions can invoke network scanning
+ * with a scan configuration supplied in a user scan configuration structure.
+ * This structure is used as the basis of one or many scan command configuration
+ * commands that are sent to the command processing module and eventually to the
+ * firmware.
+ *
+ * This function creates a scan command configuration structure based on the
+ * following user supplied parameters (if present):
+ * - SSID filter
+ * - BSSID filter
+ * - Number of Probes to be sent
+ * - Channel list
+ *
+ * If the SSID or BSSID filter is not present, the filter is disabled/cleared.
+ * If the number of probes is not set, adapter default setting is used.
+ */
+static void
+mwifiex_scan_setup_scan_config(struct mwifiex_private *priv,
+ const struct mwifiex_user_scan_cfg *user_scan_in,
+ struct mwifiex_scan_cmd_config *scan_cfg_out,
+ struct mwifiex_ie_types_chan_list_param_set
+ **chan_list_out,
+ struct mwifiex_chan_scan_param_set
+ *scan_chan_list,
+ u8 *max_chan_per_scan, u8 *filtered_scan,
+ u8 *scan_current_only)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_ie_types_num_probes *num_probes_tlv;
+ struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv;
+ struct mwifiex_ie_types_rates_param_set *rates_tlv;
+ const u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
+ u8 *tlv_pos;
+ u32 num_probes;
+ u32 ssid_len;
+ u32 chan_idx;
+ u32 scan_type;
+ u16 scan_dur;
+ u8 channel;
+ u8 radio_type;
+ u32 ssid_idx;
+ u8 ssid_filter;
+ u8 rates[MWIFIEX_SUPPORTED_RATES];
+ u32 rates_size;
+ struct mwifiex_ie_types_htcap *ht_cap;
+
+ /* The tlv_buf_len is calculated for each scan command. The TLVs added
+ in this routine will be preserved since the routine that sends the
+ command will append channelTLVs at *chan_list_out. The difference
+ between the *chan_list_out and the tlv_buf start will be used to
+ calculate the size of anything we add in this routine. */
+ scan_cfg_out->tlv_buf_len = 0;
+
+ /* Running tlv pointer. Assigned to chan_list_out at end of function
+ so later routines know where channels can be added to the command
+ buf */
+ tlv_pos = scan_cfg_out->tlv_buf;
+
+ /* Initialize the scan as un-filtered; the flag is later set to TRUE
+ below if a SSID or BSSID filter is sent in the command */
+ *filtered_scan = false;
+
+ /* Initialize the scan as not being only on the current channel. If
+ the channel list is customized, only contains one channel, and is
+ the active channel, this is set true and data flow is not halted. */
+ *scan_current_only = false;
+
+ if (user_scan_in) {
+
+ /* Default the ssid_filter flag to TRUE, set false under
+ certain wildcard conditions and qualified by the existence
+ of an SSID list before marking the scan as filtered */
+ ssid_filter = true;
+
+ /* Set the BSS type scan filter, use Adapter setting if
+ unset */
+ scan_cfg_out->bss_mode =
+ (user_scan_in->bss_mode ? (u8) user_scan_in->
+ bss_mode : (u8) adapter->scan_mode);
+
+ /* Set the number of probes to send, use Adapter setting
+ if unset */
+ num_probes =
+ (user_scan_in->num_probes ? user_scan_in->
+ num_probes : adapter->scan_probes);
+
+ /*
+ * Set the BSSID filter to the incoming configuration,
+ * if non-zero. If not set, it will remain disabled
+ * (all zeros).
+ */
+ memcpy(scan_cfg_out->specific_bssid,
+ user_scan_in->specific_bssid,
+ sizeof(scan_cfg_out->specific_bssid));
+
+ for (ssid_idx = 0;
+ ((ssid_idx < ARRAY_SIZE(user_scan_in->ssid_list))
+ && (*user_scan_in->ssid_list[ssid_idx].ssid
+ || user_scan_in->ssid_list[ssid_idx].max_len));
+ ssid_idx++) {
+
+ ssid_len = strlen(user_scan_in->ssid_list[ssid_idx].
+ ssid) + 1;
+
+ wildcard_ssid_tlv =
+ (struct mwifiex_ie_types_wildcard_ssid_params *)
+ tlv_pos;
+ wildcard_ssid_tlv->header.type =
+ cpu_to_le16(TLV_TYPE_WILDCARDSSID);
+ wildcard_ssid_tlv->header.len = cpu_to_le16(
+ (u16) (ssid_len + sizeof(wildcard_ssid_tlv->
+ max_ssid_length)));
+ wildcard_ssid_tlv->max_ssid_length =
+ user_scan_in->ssid_list[ssid_idx].max_len;
+
+ memcpy(wildcard_ssid_tlv->ssid,
+ user_scan_in->ssid_list[ssid_idx].ssid,
+ ssid_len);
+
+ tlv_pos += (sizeof(wildcard_ssid_tlv->header)
+ + le16_to_cpu(wildcard_ssid_tlv->header.len));
+
+ dev_dbg(adapter->dev, "info: scan: ssid_list[%d]: %s, %d\n",
+ ssid_idx, wildcard_ssid_tlv->ssid,
+ wildcard_ssid_tlv->max_ssid_length);
+
+ /* Empty wildcard ssid with a maxlen will match many or
+ potentially all SSIDs (maxlen == 32), therefore do
+ not treat the scan as
+ filtered. */
+ if (!ssid_len && wildcard_ssid_tlv->max_ssid_length)
+ ssid_filter = false;
+
+ }
+
+ /*
+ * The default number of channels sent in the command is low to
+ * ensure the response buffer from the firmware does not
+ * truncate scan results. That is not an issue with an SSID
+ * or BSSID filter applied to the scan results in the firmware.
+ */
+ if ((ssid_idx && ssid_filter)
+ || memcmp(scan_cfg_out->specific_bssid, &zero_mac,
+ sizeof(zero_mac)))
+ *filtered_scan = true;
+ } else {
+ scan_cfg_out->bss_mode = (u8) adapter->scan_mode;
+ num_probes = adapter->scan_probes;
+ }
+
+ /*
+ * If a specific BSSID or SSID is used, the number of channels in the
+ * scan command will be increased to the absolute maximum.
+ */
+ if (*filtered_scan)
+ *max_chan_per_scan = MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN;
+ else
+ *max_chan_per_scan = MWIFIEX_CHANNELS_PER_SCAN_CMD;
+
+ /* If the input config or adapter has the number of Probes set,
+ add tlv */
+ if (num_probes) {
+
+ dev_dbg(adapter->dev, "info: scan: num_probes = %d\n",
+ num_probes);
+
+ num_probes_tlv = (struct mwifiex_ie_types_num_probes *) tlv_pos;
+ num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES);
+ num_probes_tlv->header.len =
+ cpu_to_le16(sizeof(num_probes_tlv->num_probes));
+ num_probes_tlv->num_probes = cpu_to_le16((u16) num_probes);
+
+ tlv_pos += sizeof(num_probes_tlv->header) +
+ le16_to_cpu(num_probes_tlv->header.len);
+
+ }
+
+ /* Append rates tlv */
+ memset(rates, 0, sizeof(rates));
+
+ rates_size = mwifiex_get_supported_rates(priv, rates);
+
+ rates_tlv = (struct mwifiex_ie_types_rates_param_set *) tlv_pos;
+ rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES);
+ rates_tlv->header.len = cpu_to_le16((u16) rates_size);
+ memcpy(rates_tlv->rates, rates, rates_size);
+ tlv_pos += sizeof(rates_tlv->header) + rates_size;
+
+ dev_dbg(adapter->dev, "info: SCAN_CMD: Rates size = %d\n", rates_size);
+
+ if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info)
+ && (priv->adapter->config_bands & BAND_GN
+ || priv->adapter->config_bands & BAND_AN)) {
+ ht_cap = (struct mwifiex_ie_types_htcap *) tlv_pos;
+ memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap));
+ ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY);
+ ht_cap->header.len =
+ cpu_to_le16(sizeof(struct ieee80211_ht_cap));
+ radio_type =
+ mwifiex_band_to_radio_type(priv->adapter->config_bands);
+ mwifiex_fill_cap_info(priv, radio_type, ht_cap);
+ tlv_pos += sizeof(struct mwifiex_ie_types_htcap);
+ }
+
+ /* Append vendor specific IE TLV */
+ mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_SCAN, &tlv_pos);
+
+ /*
+ * Set the output for the channel TLV to the address in the tlv buffer
+ * past any TLVs that were added in this function (SSID, num_probes).
+ * Channel TLVs will be added past this for each scan command,
+ * preserving the TLVs that were previously added.
+ */
+ *chan_list_out =
+ (struct mwifiex_ie_types_chan_list_param_set *) tlv_pos;
+
+ if (user_scan_in && user_scan_in->chan_list[0].chan_number) {
+
+ dev_dbg(adapter->dev, "info: Scan: Using supplied channel list\n");
+
+ for (chan_idx = 0;
+ chan_idx < MWIFIEX_USER_SCAN_CHAN_MAX
+ && user_scan_in->chan_list[chan_idx].chan_number;
+ chan_idx++) {
+
+ channel = user_scan_in->chan_list[chan_idx].chan_number;
+ (scan_chan_list + chan_idx)->chan_number = channel;
+
+ radio_type =
+ user_scan_in->chan_list[chan_idx].radio_type;
+ (scan_chan_list + chan_idx)->radio_type = radio_type;
+
+ scan_type = user_scan_in->chan_list[chan_idx].scan_type;
+
+ if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
+ (scan_chan_list +
+ chan_idx)->chan_scan_mode_bitmap
+ |= MWIFIEX_PASSIVE_SCAN;
+ else
+ (scan_chan_list +
+ chan_idx)->chan_scan_mode_bitmap
+ &= ~MWIFIEX_PASSIVE_SCAN;
+
+ if (user_scan_in->chan_list[chan_idx].scan_time) {
+ scan_dur = (u16) user_scan_in->
+ chan_list[chan_idx].scan_time;
+ } else {
+ if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
+ scan_dur = adapter->passive_scan_time;
+ else if (*filtered_scan)
+ scan_dur = adapter->specific_scan_time;
+ else
+ scan_dur = adapter->active_scan_time;
+ }
+
+ (scan_chan_list + chan_idx)->min_scan_time =
+ cpu_to_le16(scan_dur);
+ (scan_chan_list + chan_idx)->max_scan_time =
+ cpu_to_le16(scan_dur);
+ }
+
+ /* Check if we are only scanning the current channel */
+ if ((chan_idx == 1)
+ && (user_scan_in->chan_list[0].chan_number
+ == priv->curr_bss_params.bss_descriptor.channel)) {
+ *scan_current_only = true;
+ dev_dbg(adapter->dev,
+ "info: Scan: Scanning current channel only\n");
+ }
+
+ } else {
+ dev_dbg(adapter->dev,
+ "info: Scan: Creating full region channel list\n");
+ mwifiex_scan_create_channel_list(priv, user_scan_in,
+ scan_chan_list,
+ *filtered_scan);
+ }
+}
+
+/*
+ * This function inspects the scan response buffer for pointers to
+ * expected TLVs.
+ *
+ * TLVs can be included at the end of the scan response BSS information.
+ *
+ * Data in the buffer is parsed pointers to TLVs that can potentially
+ * be passed back in the response.
+ */
+static void
+mwifiex_ret_802_11_scan_get_tlv_ptrs(struct mwifiex_adapter *adapter,
+ struct mwifiex_ie_types_data *tlv,
+ u32 tlv_buf_size, u32 req_tlv_type,
+ struct mwifiex_ie_types_data **tlv_data)
+{
+ struct mwifiex_ie_types_data *current_tlv;
+ u32 tlv_buf_left;
+ u32 tlv_type;
+ u32 tlv_len;
+
+ current_tlv = tlv;
+ tlv_buf_left = tlv_buf_size;
+ *tlv_data = NULL;
+
+ dev_dbg(adapter->dev, "info: SCAN_RESP: tlv_buf_size = %d\n",
+ tlv_buf_size);
+
+ while (tlv_buf_left >= sizeof(struct mwifiex_ie_types_header)) {
+
+ tlv_type = le16_to_cpu(current_tlv->header.type);
+ tlv_len = le16_to_cpu(current_tlv->header.len);
+
+ if (sizeof(tlv->header) + tlv_len > tlv_buf_left) {
+ dev_err(adapter->dev, "SCAN_RESP: TLV buffer corrupt\n");
+ break;
+ }
+
+ if (req_tlv_type == tlv_type) {
+ switch (tlv_type) {
+ case TLV_TYPE_TSFTIMESTAMP:
+ dev_dbg(adapter->dev, "info: SCAN_RESP: TSF "
+ "timestamp TLV, len = %d\n", tlv_len);
+ *tlv_data = (struct mwifiex_ie_types_data *)
+ current_tlv;
+ break;
+ case TLV_TYPE_CHANNELBANDLIST:
+ dev_dbg(adapter->dev, "info: SCAN_RESP: channel"
+ " band list TLV, len = %d\n", tlv_len);
+ *tlv_data = (struct mwifiex_ie_types_data *)
+ current_tlv;
+ break;
+ default:
+ dev_err(adapter->dev,
+ "SCAN_RESP: unhandled TLV = %d\n",
+ tlv_type);
+ /* Give up, this seems corrupted */
+ return;
+ }
+ }
+
+ if (*tlv_data)
+ break;
+
+
+ tlv_buf_left -= (sizeof(tlv->header) + tlv_len);
+ current_tlv =
+ (struct mwifiex_ie_types_data *) (current_tlv->data +
+ tlv_len);
+
+ } /* while */
+}
+
+/*
+ * This function interprets a BSS scan response returned from the firmware.
+ *
+ * The various fixed fields and IEs are parsed and passed back for a BSS
+ * probe response or beacon from scan command. Information is recorded as
+ * needed in the scan table for that entry.
+ *
+ * The following IE types are recognized and parsed -
+ * - SSID
+ * - Supported rates
+ * - FH parameters set
+ * - DS parameters set
+ * - CF parameters set
+ * - IBSS parameters set
+ * - ERP information
+ * - Extended supported rates
+ * - Vendor specific (221)
+ * - RSN IE
+ * - WAPI IE
+ * - HT capability
+ * - HT operation
+ * - BSS Coexistence 20/40
+ * - Extended capability
+ * - Overlapping BSS scan parameters
+ */
+static int
+mwifiex_interpret_bss_desc_with_ie(struct mwifiex_adapter *adapter,
+ struct mwifiex_bssdescriptor *bss_entry,
+ u8 **beacon_info, u32 *bytes_left)
+{
+ int ret = 0;
+ u8 element_id;
+ struct ieee_types_fh_param_set *fh_param_set;
+ struct ieee_types_ds_param_set *ds_param_set;
+ struct ieee_types_cf_param_set *cf_param_set;
+ struct ieee_types_ibss_param_set *ibss_param_set;
+ __le16 beacon_interval;
+ __le16 capabilities;
+ u8 *current_ptr;
+ u8 *rate;
+ u8 element_len;
+ u16 total_ie_len;
+ u8 bytes_to_copy;
+ u8 rate_size;
+ u16 beacon_size;
+ u8 found_data_rate_ie;
+ u32 bytes_left_for_current_beacon;
+ struct ieee_types_vendor_specific *vendor_ie;
+ const u8 wpa_oui[4] = { 0x00, 0x50, 0xf2, 0x01 };
+ const u8 wmm_oui[4] = { 0x00, 0x50, 0xf2, 0x02 };
+
+ found_data_rate_ie = false;
+ rate_size = 0;
+ beacon_size = 0;
+
+ if (*bytes_left >= sizeof(beacon_size)) {
+ /* Extract & convert beacon size from the command buffer */
+ memcpy(&beacon_size, *beacon_info, sizeof(beacon_size));
+ *bytes_left -= sizeof(beacon_size);
+ *beacon_info += sizeof(beacon_size);
+ }
+
+ if (!beacon_size || beacon_size > *bytes_left) {
+ *beacon_info += *bytes_left;
+ *bytes_left = 0;
+ return -1;
+ }
+
+ /* Initialize the current working beacon pointer for this BSS
+ iteration */
+ current_ptr = *beacon_info;
+
+ /* Advance the return beacon pointer past the current beacon */
+ *beacon_info += beacon_size;
+ *bytes_left -= beacon_size;
+
+ bytes_left_for_current_beacon = beacon_size;
+
+ memcpy(bss_entry->mac_address, current_ptr, ETH_ALEN);
+ dev_dbg(adapter->dev, "info: InterpretIE: AP MAC Addr: %pM\n",
+ bss_entry->mac_address);
+
+ current_ptr += ETH_ALEN;
+ bytes_left_for_current_beacon -= ETH_ALEN;
+
+ if (bytes_left_for_current_beacon < 12) {
+ dev_err(adapter->dev, "InterpretIE: not enough bytes left\n");
+ return -1;
+ }
+
+ /*
+ * Next 4 fields are RSSI, time stamp, beacon interval,
+ * and capability information
+ */
+
+ /* RSSI is 1 byte long */
+ bss_entry->rssi = (s32) (*current_ptr);
+ dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%02X\n", *current_ptr);
+ current_ptr += 1;
+ bytes_left_for_current_beacon -= 1;
+
+ /*
+ * The RSSI is not part of the beacon/probe response. After we have
+ * advanced current_ptr past the RSSI field, save the remaining
+ * data for use at the application layer
+ */
+ bss_entry->beacon_buf = current_ptr;
+ bss_entry->beacon_buf_size = bytes_left_for_current_beacon;
+
+ /* Time stamp is 8 bytes long */
+ memcpy(bss_entry->time_stamp, current_ptr, 8);
+ current_ptr += 8;
+ bytes_left_for_current_beacon -= 8;
+
+ /* Beacon interval is 2 bytes long */
+ memcpy(&beacon_interval, current_ptr, 2);
+ bss_entry->beacon_period = le16_to_cpu(beacon_interval);
+ current_ptr += 2;
+ bytes_left_for_current_beacon -= 2;
+
+ /* Capability information is 2 bytes long */
+ memcpy(&capabilities, current_ptr, 2);
+ dev_dbg(adapter->dev, "info: InterpretIE: capabilities=0x%X\n",
+ capabilities);
+ bss_entry->cap_info_bitmap = le16_to_cpu(capabilities);
+ current_ptr += 2;
+ bytes_left_for_current_beacon -= 2;
+
+ /* Rest of the current buffer are IE's */
+ dev_dbg(adapter->dev, "info: InterpretIE: IELength for this AP = %d\n",
+ bytes_left_for_current_beacon);
+
+ if (bss_entry->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) {
+ dev_dbg(adapter->dev, "info: InterpretIE: AP WEP enabled\n");
+ bss_entry->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP;
+ } else {
+ bss_entry->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL;
+ }
+
+ if (bss_entry->cap_info_bitmap & WLAN_CAPABILITY_IBSS)
+ bss_entry->bss_mode = NL80211_IFTYPE_ADHOC;
+ else
+ bss_entry->bss_mode = NL80211_IFTYPE_STATION;
+
+
+ /* Process variable IE */
+ while (bytes_left_for_current_beacon >= 2) {
+ element_id = *current_ptr;
+ element_len = *(current_ptr + 1);
+ total_ie_len = element_len + sizeof(struct ieee_types_header);
+
+ if (bytes_left_for_current_beacon < total_ie_len) {
+ dev_err(adapter->dev, "err: InterpretIE: in processing"
+ " IE, bytes left < IE length\n");
+ bytes_left_for_current_beacon = 0;
+ ret = -1;
+ continue;
+ }
+ switch (element_id) {
+ case WLAN_EID_SSID:
+ bss_entry->ssid.ssid_len = element_len;
+ memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
+ element_len);
+ dev_dbg(adapter->dev, "info: InterpretIE: ssid: %-32s\n",
+ bss_entry->ssid.ssid);
+ break;
+
+ case WLAN_EID_SUPP_RATES:
+ memcpy(bss_entry->data_rates, current_ptr + 2,
+ element_len);
+ memcpy(bss_entry->supported_rates, current_ptr + 2,
+ element_len);
+ rate_size = element_len;
+ found_data_rate_ie = true;
+ break;
+
+ case WLAN_EID_FH_PARAMS:
+ fh_param_set =
+ (struct ieee_types_fh_param_set *) current_ptr;
+ memcpy(&bss_entry->phy_param_set.fh_param_set,
+ fh_param_set,
+ sizeof(struct ieee_types_fh_param_set));
+ break;
+
+ case WLAN_EID_DS_PARAMS:
+ ds_param_set =
+ (struct ieee_types_ds_param_set *) current_ptr;
+
+ bss_entry->channel = ds_param_set->current_chan;
+
+ memcpy(&bss_entry->phy_param_set.ds_param_set,
+ ds_param_set,
+ sizeof(struct ieee_types_ds_param_set));
+ break;
+
+ case WLAN_EID_CF_PARAMS:
+ cf_param_set =
+ (struct ieee_types_cf_param_set *) current_ptr;
+ memcpy(&bss_entry->ss_param_set.cf_param_set,
+ cf_param_set,
+ sizeof(struct ieee_types_cf_param_set));
+ break;
+
+ case WLAN_EID_IBSS_PARAMS:
+ ibss_param_set =
+ (struct ieee_types_ibss_param_set *)
+ current_ptr;
+ memcpy(&bss_entry->ss_param_set.ibss_param_set,
+ ibss_param_set,
+ sizeof(struct ieee_types_ibss_param_set));
+ break;
+
+ case WLAN_EID_ERP_INFO:
+ bss_entry->erp_flags = *(current_ptr + 2);
+ break;
+
+ case WLAN_EID_EXT_SUPP_RATES:
+ /*
+ * Only process extended supported rate
+ * if data rate is already found.
+ * Data rate IE should come before
+ * extended supported rate IE
+ */
+ if (found_data_rate_ie) {
+ if ((element_len + rate_size) >
+ MWIFIEX_SUPPORTED_RATES)
+ bytes_to_copy =
+ (MWIFIEX_SUPPORTED_RATES -
+ rate_size);
+ else
+ bytes_to_copy = element_len;
+
+ rate = (u8 *) bss_entry->data_rates;
+ rate += rate_size;
+ memcpy(rate, current_ptr + 2, bytes_to_copy);
+
+ rate = (u8 *) bss_entry->supported_rates;
+ rate += rate_size;
+ memcpy(rate, current_ptr + 2, bytes_to_copy);
+ }
+ break;
+
+ case WLAN_EID_VENDOR_SPECIFIC:
+ vendor_ie = (struct ieee_types_vendor_specific *)
+ current_ptr;
+
+ if (!memcmp
+ (vendor_ie->vend_hdr.oui, wpa_oui,
+ sizeof(wpa_oui))) {
+ bss_entry->bcn_wpa_ie =
+ (struct ieee_types_vendor_specific *)
+ current_ptr;
+ bss_entry->wpa_offset = (u16) (current_ptr -
+ bss_entry->beacon_buf);
+ } else if (!memcmp(vendor_ie->vend_hdr.oui, wmm_oui,
+ sizeof(wmm_oui))) {
+ if (total_ie_len ==
+ sizeof(struct ieee_types_wmm_parameter)
+ || total_ie_len ==
+ sizeof(struct ieee_types_wmm_info))
+ /*
+ * Only accept and copy the WMM IE if
+ * it matches the size expected for the
+ * WMM Info IE or the WMM Parameter IE.
+ */
+ memcpy((u8 *) &bss_entry->wmm_ie,
+ current_ptr, total_ie_len);
+ }
+ break;
+ case WLAN_EID_RSN:
+ bss_entry->bcn_rsn_ie =
+ (struct ieee_types_generic *) current_ptr;
+ bss_entry->rsn_offset = (u16) (current_ptr -
+ bss_entry->beacon_buf);
+ break;
+ case WLAN_EID_BSS_AC_ACCESS_DELAY:
+ bss_entry->bcn_wapi_ie =
+ (struct ieee_types_generic *) current_ptr;
+ bss_entry->wapi_offset = (u16) (current_ptr -
+ bss_entry->beacon_buf);
+ break;
+ case WLAN_EID_HT_CAPABILITY:
+ bss_entry->bcn_ht_cap = (struct ieee80211_ht_cap *)
+ (current_ptr +
+ sizeof(struct ieee_types_header));
+ bss_entry->ht_cap_offset = (u16) (current_ptr +
+ sizeof(struct ieee_types_header) -
+ bss_entry->beacon_buf);
+ break;
+ case WLAN_EID_HT_INFORMATION:
+ bss_entry->bcn_ht_info = (struct ieee80211_ht_info *)
+ (current_ptr +
+ sizeof(struct ieee_types_header));
+ bss_entry->ht_info_offset = (u16) (current_ptr +
+ sizeof(struct ieee_types_header) -
+ bss_entry->beacon_buf);
+ break;
+ case WLAN_EID_BSS_COEX_2040:
+ bss_entry->bcn_bss_co_2040 = (u8 *) (current_ptr +
+ sizeof(struct ieee_types_header));
+ bss_entry->bss_co_2040_offset = (u16) (current_ptr +
+ sizeof(struct ieee_types_header) -
+ bss_entry->beacon_buf);
+ break;
+ case WLAN_EID_EXT_CAPABILITY:
+ bss_entry->bcn_ext_cap = (u8 *) (current_ptr +
+ sizeof(struct ieee_types_header));
+ bss_entry->ext_cap_offset = (u16) (current_ptr +
+ sizeof(struct ieee_types_header) -
+ bss_entry->beacon_buf);
+ break;
+ case WLAN_EID_OVERLAP_BSS_SCAN_PARAM:
+ bss_entry->bcn_obss_scan =
+ (struct ieee_types_obss_scan_param *)
+ current_ptr;
+ bss_entry->overlap_bss_offset = (u16) (current_ptr -
+ bss_entry->beacon_buf);
+ break;
+ default:
+ break;
+ }
+
+ current_ptr += element_len + 2;
+
+ /* Need to account for IE ID and IE Len */
+ bytes_left_for_current_beacon -= (element_len + 2);
+
+ } /* while (bytes_left_for_current_beacon > 2) */
+ return ret;
+}
+
+/*
+ * This function adjusts the pointers used in beacon buffers to reflect
+ * shifts.
+ *
+ * The memory allocated for beacon buffers is of fixed sizes where all the
+ * saved beacons must be stored. New beacons are added in the free portion
+ * of this memory, space permitting; while duplicate beacon buffers are
+ * placed at the same start location. However, since duplicate beacon
+ * buffers may not match the size of the old one, all the following buffers
+ * in the memory must be shifted to either make space, or to fill up freed
+ * up space.
+ *
+ * This function is used to update the beacon buffer pointers that are past
+ * an existing beacon buffer that is updated with a new one of different
+ * size. The pointers are shifted by a fixed amount, either forward or
+ * backward.
+ *
+ * the following pointers in every affected beacon buffers are changed, if
+ * present -
+ * - WPA IE pointer
+ * - RSN IE pointer
+ * - WAPI IE pointer
+ * - HT capability IE pointer
+ * - HT information IE pointer
+ * - BSS coexistence 20/40 IE pointer
+ * - Extended capability IE pointer
+ * - Overlapping BSS scan parameter IE pointer
+ */
+static void
+mwifiex_adjust_beacon_buffer_ptrs(struct mwifiex_private *priv, u8 advance,
+ u8 *bcn_store, u32 rem_bcn_size,
+ u32 num_of_ent)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u32 adj_idx;
+ for (adj_idx = 0; adj_idx < num_of_ent; adj_idx++) {
+ if (adapter->scan_table[adj_idx].beacon_buf > bcn_store) {
+
+ if (advance)
+ adapter->scan_table[adj_idx].beacon_buf +=
+ rem_bcn_size;
+ else
+ adapter->scan_table[adj_idx].beacon_buf -=
+ rem_bcn_size;
+
+ if (adapter->scan_table[adj_idx].bcn_wpa_ie)
+ adapter->scan_table[adj_idx].bcn_wpa_ie =
+ (struct ieee_types_vendor_specific *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].wpa_offset);
+ if (adapter->scan_table[adj_idx].bcn_rsn_ie)
+ adapter->scan_table[adj_idx].bcn_rsn_ie =
+ (struct ieee_types_generic *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].rsn_offset);
+ if (adapter->scan_table[adj_idx].bcn_wapi_ie)
+ adapter->scan_table[adj_idx].bcn_wapi_ie =
+ (struct ieee_types_generic *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].wapi_offset);
+ if (adapter->scan_table[adj_idx].bcn_ht_cap)
+ adapter->scan_table[adj_idx].bcn_ht_cap =
+ (struct ieee80211_ht_cap *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].ht_cap_offset);
+
+ if (adapter->scan_table[adj_idx].bcn_ht_info)
+ adapter->scan_table[adj_idx].bcn_ht_info =
+ (struct ieee80211_ht_info *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].ht_info_offset);
+ if (adapter->scan_table[adj_idx].bcn_bss_co_2040)
+ adapter->scan_table[adj_idx].bcn_bss_co_2040 =
+ (u8 *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].bss_co_2040_offset);
+ if (adapter->scan_table[adj_idx].bcn_ext_cap)
+ adapter->scan_table[adj_idx].bcn_ext_cap =
+ (u8 *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].ext_cap_offset);
+ if (adapter->scan_table[adj_idx].bcn_obss_scan)
+ adapter->scan_table[adj_idx].bcn_obss_scan =
+ (struct ieee_types_obss_scan_param *)
+ (adapter->scan_table[adj_idx].beacon_buf +
+ adapter->scan_table[adj_idx].overlap_bss_offset);
+ }
+ }
+}
+
+/*
+ * This function updates the pointers used in beacon buffer for given bss
+ * descriptor to reflect shifts
+ *
+ * Following pointers are updated
+ * - WPA IE pointer
+ * - RSN IE pointer
+ * - WAPI IE pointer
+ * - HT capability IE pointer
+ * - HT information IE pointer
+ * - BSS coexistence 20/40 IE pointer
+ * - Extended capability IE pointer
+ * - Overlapping BSS scan parameter IE pointer
+ */
+static void
+mwifiex_update_beacon_buffer_ptrs(struct mwifiex_bssdescriptor *beacon)
+{
+ if (beacon->bcn_wpa_ie)
+ beacon->bcn_wpa_ie = (struct ieee_types_vendor_specific *)
+ (beacon->beacon_buf + beacon->wpa_offset);
+ if (beacon->bcn_rsn_ie)
+ beacon->bcn_rsn_ie = (struct ieee_types_generic *)
+ (beacon->beacon_buf + beacon->rsn_offset);
+ if (beacon->bcn_wapi_ie)
+ beacon->bcn_wapi_ie = (struct ieee_types_generic *)
+ (beacon->beacon_buf + beacon->wapi_offset);
+ if (beacon->bcn_ht_cap)
+ beacon->bcn_ht_cap = (struct ieee80211_ht_cap *)
+ (beacon->beacon_buf + beacon->ht_cap_offset);
+ if (beacon->bcn_ht_info)
+ beacon->bcn_ht_info = (struct ieee80211_ht_info *)
+ (beacon->beacon_buf + beacon->ht_info_offset);
+ if (beacon->bcn_bss_co_2040)
+ beacon->bcn_bss_co_2040 = (u8 *) (beacon->beacon_buf +
+ beacon->bss_co_2040_offset);
+ if (beacon->bcn_ext_cap)
+ beacon->bcn_ext_cap = (u8 *) (beacon->beacon_buf +
+ beacon->ext_cap_offset);
+ if (beacon->bcn_obss_scan)
+ beacon->bcn_obss_scan = (struct ieee_types_obss_scan_param *)
+ (beacon->beacon_buf + beacon->overlap_bss_offset);
+}
+
+/*
+ * This function stores a beacon or probe response for a BSS returned
+ * in the scan.
+ *
+ * This stores a new scan response or an update for a previous scan response.
+ * New entries need to verify that they do not exceed the total amount of
+ * memory allocated for the table.
+ *
+ * Replacement entries need to take into consideration the amount of space
+ * currently allocated for the beacon/probe response and adjust the entry
+ * as needed.
+ *
+ * A small amount of extra pad (SCAN_BEACON_ENTRY_PAD) is generally reserved
+ * for an entry in case it is a beacon since a probe response for the
+ * network will by larger per the standard. This helps to reduce the
+ * amount of memory copying to fit a new probe response into an entry
+ * already occupied by a network's previously stored beacon.
+ */
+static void
+mwifiex_ret_802_11_scan_store_beacon(struct mwifiex_private *priv,
+ u32 beacon_idx, u32 num_of_ent,
+ struct mwifiex_bssdescriptor *new_beacon)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u8 *bcn_store;
+ u32 new_bcn_size;
+ u32 old_bcn_size;
+ u32 bcn_space;
+
+ if (adapter->scan_table[beacon_idx].beacon_buf) {
+
+ new_bcn_size = new_beacon->beacon_buf_size;
+ old_bcn_size = adapter->scan_table[beacon_idx].beacon_buf_size;
+ bcn_space = adapter->scan_table[beacon_idx].beacon_buf_size_max;
+ bcn_store = adapter->scan_table[beacon_idx].beacon_buf;
+
+ /* Set the max to be the same as current entry unless changed
+ below */
+ new_beacon->beacon_buf_size_max = bcn_space;
+ if (new_bcn_size == old_bcn_size) {
+ /*
+ * Beacon is the same size as the previous entry.
+ * Replace the previous contents with the scan result
+ */
+ memcpy(bcn_store, new_beacon->beacon_buf,
+ new_beacon->beacon_buf_size);
+
+ } else if (new_bcn_size <= bcn_space) {
+ /*
+ * New beacon size will fit in the amount of space
+ * we have previously allocated for it
+ */
+
+ /* Copy the new beacon buffer entry over the old one */
+ memcpy(bcn_store, new_beacon->beacon_buf, new_bcn_size);
+
+ /*
+ * If the old beacon size was less than the maximum
+ * we had alloted for the entry, and the new entry
+ * is even smaller, reset the max size to the old
+ * beacon entry and compress the storage space
+ * (leaving a new pad space of (old_bcn_size -
+ * new_bcn_size).
+ */
+ if (old_bcn_size < bcn_space
+ && new_bcn_size <= old_bcn_size) {
+ /*
+ * Old Beacon size is smaller than the alloted
+ * storage size. Shrink the alloted storage
+ * space.
+ */
+ dev_dbg(adapter->dev, "info: AppControl:"
+ " smaller duplicate beacon "
+ "(%d), old = %d, new = %d, space = %d,"
+ "left = %d\n",
+ beacon_idx, old_bcn_size, new_bcn_size,
+ bcn_space,
+ (int)(sizeof(adapter->bcn_buf) -
+ (adapter->bcn_buf_end -
+ adapter->bcn_buf)));
+
+ /*
+ * memmove (since the memory overlaps) the
+ * data after the beacon we just stored to the
+ * end of the current beacon. This cleans up
+ * any unused space the old larger beacon was
+ * using in the buffer
+ */
+ memmove(bcn_store + old_bcn_size,
+ bcn_store + bcn_space,
+ adapter->bcn_buf_end - (bcn_store +
+ bcn_space));
+
+ /*
+ * Decrement the end pointer by the difference
+ * between the old larger size and the new
+ * smaller size since we are using less space
+ * due to the new beacon being smaller
+ */
+ adapter->bcn_buf_end -=
+ (bcn_space - old_bcn_size);
+
+ /* Set the maximum storage size to the old
+ beacon size */
+ new_beacon->beacon_buf_size_max = old_bcn_size;
+
+ /* Adjust beacon buffer pointers that are past
+ the current */
+ mwifiex_adjust_beacon_buffer_ptrs(priv, 0,
+ bcn_store, (bcn_space - old_bcn_size),
+ num_of_ent);
+ }
+ } else if (adapter->bcn_buf_end + (new_bcn_size - bcn_space)
+ < (adapter->bcn_buf + sizeof(adapter->bcn_buf))) {
+ /*
+ * Beacon is larger than space previously allocated
+ * (bcn_space) and there is enough space left in the
+ * beaconBuffer to store the additional data
+ */
+ dev_dbg(adapter->dev, "info: AppControl:"
+ " larger duplicate beacon (%d), "
+ "old = %d, new = %d, space = %d, left = %d\n",
+ beacon_idx, old_bcn_size, new_bcn_size,
+ bcn_space,
+ (int)(sizeof(adapter->bcn_buf) -
+ (adapter->bcn_buf_end -
+ adapter->bcn_buf)));
+
+ /*
+ * memmove (since the memory overlaps) the data
+ * after the beacon we just stored to the end of
+ * the current beacon. This moves the data for
+ * the beacons after this further in memory to
+ * make space for the new larger beacon we are
+ * about to copy in.
+ */
+ memmove(bcn_store + new_bcn_size,
+ bcn_store + bcn_space,
+ adapter->bcn_buf_end - (bcn_store + bcn_space));
+
+ /* Copy the new beacon buffer entry over the old one */
+ memcpy(bcn_store, new_beacon->beacon_buf, new_bcn_size);
+
+ /* Move the beacon end pointer by the amount of new
+ beacon data we are adding */
+ adapter->bcn_buf_end += (new_bcn_size - bcn_space);
+
+ /*
+ * This entry is bigger than the alloted max space
+ * previously reserved. Increase the max space to
+ * be equal to the new beacon size
+ */
+ new_beacon->beacon_buf_size_max = new_bcn_size;
+
+ /* Adjust beacon buffer pointers that are past the
+ current */
+ mwifiex_adjust_beacon_buffer_ptrs(priv, 1, bcn_store,
+ (new_bcn_size - bcn_space),
+ num_of_ent);
+ } else {
+ /*
+ * Beacon is larger than the previously allocated space,
+ * but there is not enough free space to store the
+ * additional data.
+ */
+ dev_err(adapter->dev, "AppControl: larger duplicate "
+ " beacon (%d), old = %d new = %d, space = %d,"
+ " left = %d\n", beacon_idx, old_bcn_size,
+ new_bcn_size, bcn_space,
+ (int)(sizeof(adapter->bcn_buf) -
+ (adapter->bcn_buf_end - adapter->bcn_buf)));
+
+ /* Storage failure, keep old beacon intact */
+ new_beacon->beacon_buf_size = old_bcn_size;
+ if (new_beacon->bcn_wpa_ie)
+ new_beacon->wpa_offset =
+ adapter->scan_table[beacon_idx].
+ wpa_offset;
+ if (new_beacon->bcn_rsn_ie)
+ new_beacon->rsn_offset =
+ adapter->scan_table[beacon_idx].
+ rsn_offset;
+ if (new_beacon->bcn_wapi_ie)
+ new_beacon->wapi_offset =
+ adapter->scan_table[beacon_idx].
+ wapi_offset;
+ if (new_beacon->bcn_ht_cap)
+ new_beacon->ht_cap_offset =
+ adapter->scan_table[beacon_idx].
+ ht_cap_offset;
+ if (new_beacon->bcn_ht_info)
+ new_beacon->ht_info_offset =
+ adapter->scan_table[beacon_idx].
+ ht_info_offset;
+ if (new_beacon->bcn_bss_co_2040)
+ new_beacon->bss_co_2040_offset =
+ adapter->scan_table[beacon_idx].
+ bss_co_2040_offset;
+ if (new_beacon->bcn_ext_cap)
+ new_beacon->ext_cap_offset =
+ adapter->scan_table[beacon_idx].
+ ext_cap_offset;
+ if (new_beacon->bcn_obss_scan)
+ new_beacon->overlap_bss_offset =
+ adapter->scan_table[beacon_idx].
+ overlap_bss_offset;
+ }
+ /* Point the new entry to its permanent storage space */
+ new_beacon->beacon_buf = bcn_store;
+ mwifiex_update_beacon_buffer_ptrs(new_beacon);
+ } else {
+ /*
+ * No existing beacon data exists for this entry, check to see
+ * if we can fit it in the remaining space
+ */
+ if (adapter->bcn_buf_end + new_beacon->beacon_buf_size +
+ SCAN_BEACON_ENTRY_PAD < (adapter->bcn_buf +
+ sizeof(adapter->bcn_buf))) {
+
+ /*
+ * Copy the beacon buffer data from the local entry to
+ * the adapter dev struct buffer space used to store
+ * the raw beacon data for each entry in the scan table
+ */
+ memcpy(adapter->bcn_buf_end, new_beacon->beacon_buf,
+ new_beacon->beacon_buf_size);
+
+ /* Update the beacon ptr to point to the table save
+ area */
+ new_beacon->beacon_buf = adapter->bcn_buf_end;
+ new_beacon->beacon_buf_size_max =
+ (new_beacon->beacon_buf_size +
+ SCAN_BEACON_ENTRY_PAD);
+
+ mwifiex_update_beacon_buffer_ptrs(new_beacon);
+
+ /* Increment the end pointer by the size reserved */
+ adapter->bcn_buf_end += new_beacon->beacon_buf_size_max;
+
+ dev_dbg(adapter->dev, "info: AppControl: beacon[%02d]"
+ " sz=%03d, used = %04d, left = %04d\n",
+ beacon_idx,
+ new_beacon->beacon_buf_size,
+ (int)(adapter->bcn_buf_end - adapter->bcn_buf),
+ (int)(sizeof(adapter->bcn_buf) -
+ (adapter->bcn_buf_end -
+ adapter->bcn_buf)));
+ } else {
+ /* No space for new beacon */
+ dev_dbg(adapter->dev, "info: AppControl: no space for"
+ " beacon (%d): %pM sz=%03d, left=%03d\n",
+ beacon_idx, new_beacon->mac_address,
+ new_beacon->beacon_buf_size,
+ (int)(sizeof(adapter->bcn_buf) -
+ (adapter->bcn_buf_end -
+ adapter->bcn_buf)));
+
+ /* Storage failure; clear storage records for this
+ bcn */
+ new_beacon->beacon_buf = NULL;
+ new_beacon->beacon_buf_size = 0;
+ new_beacon->beacon_buf_size_max = 0;
+ new_beacon->bcn_wpa_ie = NULL;
+ new_beacon->wpa_offset = 0;
+ new_beacon->bcn_rsn_ie = NULL;
+ new_beacon->rsn_offset = 0;
+ new_beacon->bcn_wapi_ie = NULL;
+ new_beacon->wapi_offset = 0;
+ new_beacon->bcn_ht_cap = NULL;
+ new_beacon->ht_cap_offset = 0;
+ new_beacon->bcn_ht_info = NULL;
+ new_beacon->ht_info_offset = 0;
+ new_beacon->bcn_bss_co_2040 = NULL;
+ new_beacon->bss_co_2040_offset = 0;
+ new_beacon->bcn_ext_cap = NULL;
+ new_beacon->ext_cap_offset = 0;
+ new_beacon->bcn_obss_scan = NULL;
+ new_beacon->overlap_bss_offset = 0;
+ }
+ }
+}
+
+/*
+ * This function restores a beacon buffer of the current BSS descriptor.
+ */
+static void mwifiex_restore_curr_bcn(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bssdescriptor *curr_bss =
+ &priv->curr_bss_params.bss_descriptor;
+ unsigned long flags;
+
+ if (priv->curr_bcn_buf &&
+ ((adapter->bcn_buf_end + priv->curr_bcn_size) <
+ (adapter->bcn_buf + sizeof(adapter->bcn_buf)))) {
+ spin_lock_irqsave(&priv->curr_bcn_buf_lock, flags);
+
+ /* restore the current beacon buffer */
+ memcpy(adapter->bcn_buf_end, priv->curr_bcn_buf,
+ priv->curr_bcn_size);
+ curr_bss->beacon_buf = adapter->bcn_buf_end;
+ curr_bss->beacon_buf_size = priv->curr_bcn_size;
+ adapter->bcn_buf_end += priv->curr_bcn_size;
+
+ /* adjust the pointers in the current BSS descriptor */
+ if (curr_bss->bcn_wpa_ie)
+ curr_bss->bcn_wpa_ie =
+ (struct ieee_types_vendor_specific *)
+ (curr_bss->beacon_buf +
+ curr_bss->wpa_offset);
+
+ if (curr_bss->bcn_rsn_ie)
+ curr_bss->bcn_rsn_ie = (struct ieee_types_generic *)
+ (curr_bss->beacon_buf +
+ curr_bss->rsn_offset);
+
+ if (curr_bss->bcn_ht_cap)
+ curr_bss->bcn_ht_cap = (struct ieee80211_ht_cap *)
+ (curr_bss->beacon_buf +
+ curr_bss->ht_cap_offset);
+
+ if (curr_bss->bcn_ht_info)
+ curr_bss->bcn_ht_info = (struct ieee80211_ht_info *)
+ (curr_bss->beacon_buf +
+ curr_bss->ht_info_offset);
+
+ if (curr_bss->bcn_bss_co_2040)
+ curr_bss->bcn_bss_co_2040 =
+ (u8 *) (curr_bss->beacon_buf +
+ curr_bss->bss_co_2040_offset);
+
+ if (curr_bss->bcn_ext_cap)
+ curr_bss->bcn_ext_cap = (u8 *) (curr_bss->beacon_buf +
+ curr_bss->ext_cap_offset);
+
+ if (curr_bss->bcn_obss_scan)
+ curr_bss->bcn_obss_scan =
+ (struct ieee_types_obss_scan_param *)
+ (curr_bss->beacon_buf +
+ curr_bss->overlap_bss_offset);
+
+ spin_unlock_irqrestore(&priv->curr_bcn_buf_lock, flags);
+
+ dev_dbg(adapter->dev, "info: current beacon restored %d\n",
+ priv->curr_bcn_size);
+ } else {
+ dev_warn(adapter->dev,
+ "curr_bcn_buf not saved or bcn_buf has no space\n");
+ }
+}
+
+/*
+ * This function post processes the scan table after a new scan command has
+ * completed.
+ *
+ * It inspects each entry of the scan table and tries to find an entry that
+ * matches with our current associated/joined network from the scan. If
+ * one is found, the stored copy of the BSS descriptor of our current network
+ * is updated.
+ *
+ * It also debug dumps the current scan table contents after processing is over.
+ */
+static void
+mwifiex_process_scan_results(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ s32 j;
+ u32 i;
+ unsigned long flags;
+
+ if (priv->media_connected) {
+
+ j = mwifiex_find_ssid_in_list(priv, &priv->curr_bss_params.
+ bss_descriptor.ssid,
+ priv->curr_bss_params.
+ bss_descriptor.mac_address,
+ priv->bss_mode);
+
+ if (j >= 0) {
+ spin_lock_irqsave(&priv->curr_bcn_buf_lock, flags);
+ priv->curr_bss_params.bss_descriptor.bcn_wpa_ie = NULL;
+ priv->curr_bss_params.bss_descriptor.wpa_offset = 0;
+ priv->curr_bss_params.bss_descriptor.bcn_rsn_ie = NULL;
+ priv->curr_bss_params.bss_descriptor.rsn_offset = 0;
+ priv->curr_bss_params.bss_descriptor.bcn_wapi_ie = NULL;
+ priv->curr_bss_params.bss_descriptor.wapi_offset = 0;
+ priv->curr_bss_params.bss_descriptor.bcn_ht_cap = NULL;
+ priv->curr_bss_params.bss_descriptor.ht_cap_offset =
+ 0;
+ priv->curr_bss_params.bss_descriptor.bcn_ht_info = NULL;
+ priv->curr_bss_params.bss_descriptor.ht_info_offset =
+ 0;
+ priv->curr_bss_params.bss_descriptor.bcn_bss_co_2040 =
+ NULL;
+ priv->curr_bss_params.bss_descriptor.
+ bss_co_2040_offset = 0;
+ priv->curr_bss_params.bss_descriptor.bcn_ext_cap = NULL;
+ priv->curr_bss_params.bss_descriptor.ext_cap_offset = 0;
+ priv->curr_bss_params.bss_descriptor.
+ bcn_obss_scan = NULL;
+ priv->curr_bss_params.bss_descriptor.
+ overlap_bss_offset = 0;
+ priv->curr_bss_params.bss_descriptor.beacon_buf = NULL;
+ priv->curr_bss_params.bss_descriptor.beacon_buf_size =
+ 0;
+ priv->curr_bss_params.bss_descriptor.
+ beacon_buf_size_max = 0;
+
+ dev_dbg(adapter->dev, "info: Found current ssid/bssid"
+ " in list @ index #%d\n", j);
+ /* Make a copy of current BSSID descriptor */
+ memcpy(&priv->curr_bss_params.bss_descriptor,
+ &adapter->scan_table[j],
+ sizeof(priv->curr_bss_params.bss_descriptor));
+
+ mwifiex_save_curr_bcn(priv);
+ spin_unlock_irqrestore(&priv->curr_bcn_buf_lock, flags);
+
+ } else {
+ mwifiex_restore_curr_bcn(priv);
+ }
+ }
+
+ for (i = 0; i < adapter->num_in_scan_table; i++)
+ dev_dbg(adapter->dev, "info: scan:(%02d) %pM "
+ "RSSI[%03d], SSID[%s]\n",
+ i, adapter->scan_table[i].mac_address,
+ (s32) adapter->scan_table[i].rssi,
+ adapter->scan_table[i].ssid.ssid);
+}
+
+/*
+ * This function converts radio type scan parameter to a band configuration
+ * to be used in join command.
+ */
+static u8
+mwifiex_radio_type_to_band(u8 radio_type)
+{
+ switch (radio_type) {
+ case HostCmd_SCAN_RADIO_TYPE_A:
+ return BAND_A;
+ case HostCmd_SCAN_RADIO_TYPE_BG:
+ default:
+ return BAND_G;
+ }
+}
+
+/*
+ * This function deletes a specific indexed entry from the scan table.
+ *
+ * This also compacts the remaining entries and adjusts any buffering
+ * of beacon/probe response data if needed.
+ */
+static void
+mwifiex_scan_delete_table_entry(struct mwifiex_private *priv, s32 table_idx)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u32 del_idx;
+ u32 beacon_buf_adj;
+ u8 *beacon_buf;
+
+ /*
+ * Shift the saved beacon buffer data for the scan table back over the
+ * entry being removed. Update the end of buffer pointer. Save the
+ * deleted buffer allocation size for pointer adjustments for entries
+ * compacted after the deleted index.
+ */
+ beacon_buf_adj = adapter->scan_table[table_idx].beacon_buf_size_max;
+
+ dev_dbg(adapter->dev, "info: Scan: Delete Entry %d, beacon buffer "
+ "removal = %d bytes\n", table_idx, beacon_buf_adj);
+
+ /* Check if the table entry had storage allocated for its beacon */
+ if (beacon_buf_adj) {
+ beacon_buf = adapter->scan_table[table_idx].beacon_buf;
+
+ /*
+ * Remove the entry's buffer space, decrement the table end
+ * pointer by the amount we are removing
+ */
+ adapter->bcn_buf_end -= beacon_buf_adj;
+
+ dev_dbg(adapter->dev, "info: scan: delete entry %d,"
+ " compact data: %p <- %p (sz = %d)\n",
+ table_idx, beacon_buf,
+ beacon_buf + beacon_buf_adj,
+ (int)(adapter->bcn_buf_end - beacon_buf));
+
+ /*
+ * Compact data storage. Copy all data after the deleted
+ * entry's end address (beacon_buf + beacon_buf_adj) back
+ * to the original start address (beacon_buf).
+ *
+ * Scan table entries affected by the move will have their
+ * entry pointer adjusted below.
+ *
+ * Use memmove since the dest/src memory regions overlap.
+ */
+ memmove(beacon_buf, beacon_buf + beacon_buf_adj,
+ adapter->bcn_buf_end - beacon_buf);
+ }
+
+ dev_dbg(adapter->dev,
+ "info: Scan: Delete Entry %d, num_in_scan_table = %d\n",
+ table_idx, adapter->num_in_scan_table);
+
+ /* Shift all of the entries after the table_idx back by one, compacting
+ the table and removing the requested entry */
+ for (del_idx = table_idx; (del_idx + 1) < adapter->num_in_scan_table;
+ del_idx++) {
+ /* Copy the next entry over this one */
+ memcpy(adapter->scan_table + del_idx,
+ adapter->scan_table + del_idx + 1,
+ sizeof(struct mwifiex_bssdescriptor));
+
+ /*
+ * Adjust this entry's pointer to its beacon buffer based on
+ * the removed/compacted entry from the deleted index. Don't
+ * decrement if the buffer pointer is NULL (no data stored for
+ * this entry).
+ */
+ if (adapter->scan_table[del_idx].beacon_buf) {
+ adapter->scan_table[del_idx].beacon_buf -=
+ beacon_buf_adj;
+ if (adapter->scan_table[del_idx].bcn_wpa_ie)
+ adapter->scan_table[del_idx].bcn_wpa_ie =
+ (struct ieee_types_vendor_specific *)
+ (adapter->scan_table[del_idx].
+ beacon_buf +
+ adapter->scan_table[del_idx].
+ wpa_offset);
+ if (adapter->scan_table[del_idx].bcn_rsn_ie)
+ adapter->scan_table[del_idx].bcn_rsn_ie =
+ (struct ieee_types_generic *)
+ (adapter->scan_table[del_idx].
+ beacon_buf +
+ adapter->scan_table[del_idx].
+ rsn_offset);
+ if (adapter->scan_table[del_idx].bcn_wapi_ie)
+ adapter->scan_table[del_idx].bcn_wapi_ie =
+ (struct ieee_types_generic *)
+ (adapter->scan_table[del_idx].beacon_buf
+ + adapter->scan_table[del_idx].
+ wapi_offset);
+ if (adapter->scan_table[del_idx].bcn_ht_cap)
+ adapter->scan_table[del_idx].bcn_ht_cap =
+ (struct ieee80211_ht_cap *)
+ (adapter->scan_table[del_idx].beacon_buf
+ + adapter->scan_table[del_idx].
+ ht_cap_offset);
+
+ if (adapter->scan_table[del_idx].bcn_ht_info)
+ adapter->scan_table[del_idx].bcn_ht_info =
+ (struct ieee80211_ht_info *)
+ (adapter->scan_table[del_idx].beacon_buf
+ + adapter->scan_table[del_idx].
+ ht_info_offset);
+ if (adapter->scan_table[del_idx].bcn_bss_co_2040)
+ adapter->scan_table[del_idx].bcn_bss_co_2040 =
+ (u8 *)
+ (adapter->scan_table[del_idx].beacon_buf
+ + adapter->scan_table[del_idx].
+ bss_co_2040_offset);
+ if (adapter->scan_table[del_idx].bcn_ext_cap)
+ adapter->scan_table[del_idx].bcn_ext_cap =
+ (u8 *)
+ (adapter->scan_table[del_idx].beacon_buf
+ + adapter->scan_table[del_idx].
+ ext_cap_offset);
+ if (adapter->scan_table[del_idx].bcn_obss_scan)
+ adapter->scan_table[del_idx].
+ bcn_obss_scan =
+ (struct ieee_types_obss_scan_param *)
+ (adapter->scan_table[del_idx].beacon_buf
+ + adapter->scan_table[del_idx].
+ overlap_bss_offset);
+ }
+ }
+
+ /* The last entry is invalid now that it has been deleted or moved
+ back */
+ memset(adapter->scan_table + adapter->num_in_scan_table - 1,
+ 0x00, sizeof(struct mwifiex_bssdescriptor));
+
+ adapter->num_in_scan_table--;
+}
+
+/*
+ * This function deletes all occurrences of a given SSID from the scan table.
+ *
+ * This iterates through the scan table and deletes all entries that match
+ * the given SSID. It also compacts the remaining scan table entries.
+ */
+static int
+mwifiex_scan_delete_ssid_table_entry(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *del_ssid)
+{
+ s32 table_idx = -1;
+
+ dev_dbg(priv->adapter->dev, "info: scan: delete ssid entry: %-32s\n",
+ del_ssid->ssid);
+
+ /* If the requested SSID is found in the table, delete it. Then keep
+ searching the table for multiple entires for the SSID until no
+ more are found */
+ while ((table_idx = mwifiex_find_ssid_in_list(priv, del_ssid, NULL,
+ NL80211_IFTYPE_UNSPECIFIED)) >= 0) {
+ dev_dbg(priv->adapter->dev,
+ "info: Scan: Delete SSID Entry: Found Idx = %d\n",
+ table_idx);
+ mwifiex_scan_delete_table_entry(priv, table_idx);
+ }
+
+ return table_idx == -1 ? -1 : 0;
+}
+
+/*
+ * This is an internal function used to start a scan based on an input
+ * configuration.
+ *
+ * This uses the input user scan configuration information when provided in
+ * order to send the appropriate scan commands to firmware to populate or
+ * update the internal driver scan table.
+ */
+int mwifiex_scan_networks(struct mwifiex_private *priv,
+ const struct mwifiex_user_scan_cfg *user_scan_in)
+{
+ int ret = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct cmd_ctrl_node *cmd_node;
+ union mwifiex_scan_cmd_config_tlv *scan_cfg_out;
+ struct mwifiex_ie_types_chan_list_param_set *chan_list_out;
+ u32 buf_size;
+ struct mwifiex_chan_scan_param_set *scan_chan_list;
+ u8 keep_previous_scan;
+ u8 filtered_scan;
+ u8 scan_current_chan_only;
+ u8 max_chan_per_scan;
+ unsigned long flags;
+
+ if (adapter->scan_processing) {
+ dev_dbg(adapter->dev, "cmd: Scan already in process...\n");
+ return ret;
+ }
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->scan_processing = true;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+
+ if (priv->scan_block) {
+ dev_dbg(adapter->dev,
+ "cmd: Scan is blocked during association...\n");
+ return ret;
+ }
+
+ scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv),
+ GFP_KERNEL);
+ if (!scan_cfg_out) {
+ dev_err(adapter->dev, "failed to alloc scan_cfg_out\n");
+ return -ENOMEM;
+ }
+
+ buf_size = sizeof(struct mwifiex_chan_scan_param_set) *
+ MWIFIEX_USER_SCAN_CHAN_MAX;
+ scan_chan_list = kzalloc(buf_size, GFP_KERNEL);
+ if (!scan_chan_list) {
+ dev_err(adapter->dev, "failed to alloc scan_chan_list\n");
+ kfree(scan_cfg_out);
+ return -ENOMEM;
+ }
+
+ keep_previous_scan = false;
+
+ mwifiex_scan_setup_scan_config(priv, user_scan_in,
+ &scan_cfg_out->config, &chan_list_out,
+ scan_chan_list, &max_chan_per_scan,
+ &filtered_scan, &scan_current_chan_only);
+
+ if (user_scan_in)
+ keep_previous_scan = user_scan_in->keep_previous_scan;
+
+
+ if (!keep_previous_scan) {
+ memset(adapter->scan_table, 0x00,
+ sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP);
+ adapter->num_in_scan_table = 0;
+ adapter->bcn_buf_end = adapter->bcn_buf;
+ }
+
+ ret = mwifiex_scan_channel_list(priv, max_chan_per_scan, filtered_scan,
+ &scan_cfg_out->config, chan_list_out,
+ scan_chan_list);
+
+ /* Get scan command from scan_pending_q and put to cmd_pending_q */
+ if (!ret) {
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ if (!list_empty(&adapter->scan_pending_q)) {
+ cmd_node = list_first_entry(&adapter->scan_pending_q,
+ struct cmd_ctrl_node, list);
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+ flags);
+ mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
+ true);
+ } else {
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+ flags);
+ }
+ } else {
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->scan_processing = true;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ }
+
+ kfree(scan_cfg_out);
+ kfree(scan_chan_list);
+ return ret;
+}
+
+/*
+ * This function prepares a scan command to be sent to the firmware.
+ *
+ * This uses the scan command configuration sent to the command processing
+ * module in command preparation stage to configure a scan command structure
+ * to send to firmware.
+ *
+ * The fixed fields specifying the BSS type and BSSID filters as well as a
+ * variable number/length of TLVs are sent in the command to firmware.
+ *
+ * Preparation also includes -
+ * - Setting command ID, and proper size
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command *cmd, void *data_buf)
+{
+ struct host_cmd_ds_802_11_scan *scan_cmd = &cmd->params.scan;
+ struct mwifiex_scan_cmd_config *scan_cfg;
+
+ scan_cfg = (struct mwifiex_scan_cmd_config *) data_buf;
+
+ /* Set fixed field variables in scan command */
+ scan_cmd->bss_mode = scan_cfg->bss_mode;
+ memcpy(scan_cmd->bssid, scan_cfg->specific_bssid,
+ sizeof(scan_cmd->bssid));
+ memcpy(scan_cmd->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len);
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN);
+
+ /* Size is equal to the sizeof(fixed portions) + the TLV len + header */
+ cmd->size = cpu_to_le16((u16) (sizeof(scan_cmd->bss_mode)
+ + sizeof(scan_cmd->bssid)
+ + scan_cfg->tlv_buf_len + S_DS_GEN));
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of scan.
+ *
+ * The response buffer for the scan command has the following
+ * memory layout:
+ *
+ * .-------------------------------------------------------------.
+ * | Header (4 * sizeof(t_u16)): Standard command response hdr |
+ * .-------------------------------------------------------------.
+ * | BufSize (t_u16) : sizeof the BSS Description data |
+ * .-------------------------------------------------------------.
+ * | NumOfSet (t_u8) : Number of BSS Descs returned |
+ * .-------------------------------------------------------------.
+ * | BSSDescription data (variable, size given in BufSize) |
+ * .-------------------------------------------------------------.
+ * | TLV data (variable, size calculated using Header->Size, |
+ * | BufSize and sizeof the fixed fields above) |
+ * .-------------------------------------------------------------.
+ */
+int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ int ret = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct cmd_ctrl_node *cmd_node;
+ struct host_cmd_ds_802_11_scan_rsp *scan_rsp;
+ struct mwifiex_bssdescriptor *bss_new_entry = NULL;
+ struct mwifiex_ie_types_data *tlv_data;
+ struct mwifiex_ie_types_tsf_timestamp *tsf_tlv;
+ u8 *bss_info;
+ u32 scan_resp_size;
+ u32 bytes_left;
+ u32 num_in_table;
+ u32 bss_idx;
+ u32 idx;
+ u32 tlv_buf_size;
+ long long tsf_val;
+ struct mwifiex_chan_freq_power *cfp;
+ struct mwifiex_ie_types_chan_band_list_param_set *chan_band_tlv;
+ struct chan_band_param_set *chan_band;
+ u8 band;
+ u8 is_bgscan_resp;
+ unsigned long flags;
+
+ is_bgscan_resp = (le16_to_cpu(resp->command)
+ == HostCmd_CMD_802_11_BG_SCAN_QUERY);
+ if (is_bgscan_resp)
+ scan_rsp = &resp->params.bg_scan_query_resp.scan_resp;
+ else
+ scan_rsp = &resp->params.scan_resp;
+
+
+ if (scan_rsp->number_of_sets > IW_MAX_AP) {
+ dev_err(adapter->dev, "SCAN_RESP: too many AP returned (%d)\n",
+ scan_rsp->number_of_sets);
+ ret = -1;
+ goto done;
+ }
+
+ bytes_left = le16_to_cpu(scan_rsp->bss_descript_size);
+ dev_dbg(adapter->dev, "info: SCAN_RESP: bss_descript_size %d\n",
+ bytes_left);
+
+ scan_resp_size = le16_to_cpu(resp->size);
+
+ dev_dbg(adapter->dev,
+ "info: SCAN_RESP: returned %d APs before parsing\n",
+ scan_rsp->number_of_sets);
+
+ num_in_table = adapter->num_in_scan_table;
+ bss_info = scan_rsp->bss_desc_and_tlv_buffer;
+
+ /*
+ * The size of the TLV buffer is equal to the entire command response
+ * size (scan_resp_size) minus the fixed fields (sizeof()'s), the
+ * BSS Descriptions (bss_descript_size as bytesLef) and the command
+ * response header (S_DS_GEN)
+ */
+ tlv_buf_size = scan_resp_size - (bytes_left
+ + sizeof(scan_rsp->bss_descript_size)
+ + sizeof(scan_rsp->number_of_sets)
+ + S_DS_GEN);
+
+ tlv_data = (struct mwifiex_ie_types_data *) (scan_rsp->
+ bss_desc_and_tlv_buffer +
+ bytes_left);
+
+ /* Search the TLV buffer space in the scan response for any valid
+ TLVs */
+ mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size,
+ TLV_TYPE_TSFTIMESTAMP,
+ (struct mwifiex_ie_types_data **)
+ &tsf_tlv);
+
+ /* Search the TLV buffer space in the scan response for any valid
+ TLVs */
+ mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size,
+ TLV_TYPE_CHANNELBANDLIST,
+ (struct mwifiex_ie_types_data **)
+ &chan_band_tlv);
+
+ /*
+ * Process each scan response returned (scan_rsp->number_of_sets).
+ * Save the information in the bss_new_entry and then insert into the
+ * driver scan table either as an update to an existing entry
+ * or as an addition at the end of the table
+ */
+ bss_new_entry = kzalloc(sizeof(struct mwifiex_bssdescriptor),
+ GFP_KERNEL);
+ if (!bss_new_entry) {
+ dev_err(adapter->dev, " failed to alloc bss_new_entry\n");
+ return -ENOMEM;
+ }
+
+ for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) {
+ /* Zero out the bss_new_entry we are about to store info in */
+ memset(bss_new_entry, 0x00,
+ sizeof(struct mwifiex_bssdescriptor));
+
+ if (mwifiex_interpret_bss_desc_with_ie(adapter, bss_new_entry,
+ &bss_info,
+ &bytes_left)) {
+ /* Error parsing/interpreting scan response, skipped */
+ dev_err(adapter->dev, "SCAN_RESP: "
+ "mwifiex_interpret_bss_desc_with_ie "
+ "returned ERROR\n");
+ continue;
+ }
+
+ /* Process the data fields and IEs returned for this BSS */
+ dev_dbg(adapter->dev, "info: SCAN_RESP: BSSID = %pM\n",
+ bss_new_entry->mac_address);
+
+ /* Search the scan table for the same bssid */
+ for (bss_idx = 0; bss_idx < num_in_table; bss_idx++) {
+ if (memcmp(bss_new_entry->mac_address,
+ adapter->scan_table[bss_idx].mac_address,
+ sizeof(bss_new_entry->mac_address))) {
+ continue;
+ }
+ /*
+ * If the SSID matches as well, it is a
+ * duplicate of this entry. Keep the bss_idx
+ * set to this entry so we replace the old
+ * contents in the table
+ */
+ if ((bss_new_entry->ssid.ssid_len
+ == adapter->scan_table[bss_idx]. ssid.ssid_len)
+ && (!memcmp(bss_new_entry->ssid.ssid,
+ adapter->scan_table[bss_idx].ssid.ssid,
+ bss_new_entry->ssid.ssid_len))) {
+ dev_dbg(adapter->dev, "info: SCAN_RESP:"
+ " duplicate of index: %d\n", bss_idx);
+ break;
+ }
+ }
+ /*
+ * If the bss_idx is equal to the number of entries in
+ * the table, the new entry was not a duplicate; append
+ * it to the scan table
+ */
+ if (bss_idx == num_in_table) {
+ /* Range check the bss_idx, keep it limited to
+ the last entry */
+ if (bss_idx == IW_MAX_AP)
+ bss_idx--;
+ else
+ num_in_table++;
+ }
+
+ /*
+ * Save the beacon/probe response returned for later application
+ * retrieval. Duplicate beacon/probe responses are updated if
+ * possible
+ */
+ mwifiex_ret_802_11_scan_store_beacon(priv, bss_idx,
+ num_in_table, bss_new_entry);
+ /*
+ * If the TSF TLV was appended to the scan results, save this
+ * entry's TSF value in the networkTSF field.The networkTSF is
+ * the firmware's TSF value at the time the beacon or probe
+ * response was received.
+ */
+ if (tsf_tlv) {
+ memcpy(&tsf_val, &tsf_tlv->tsf_data[idx * TSF_DATA_SIZE]
+ , sizeof(tsf_val));
+ memcpy(&bss_new_entry->network_tsf, &tsf_val,
+ sizeof(bss_new_entry->network_tsf));
+ }
+ band = BAND_G;
+ if (chan_band_tlv) {
+ chan_band = &chan_band_tlv->chan_band_param[idx];
+ band = mwifiex_radio_type_to_band(chan_band->radio_type
+ & (BIT(0) | BIT(1)));
+ }
+
+ /* Save the band designation for this entry for use in join */
+ bss_new_entry->bss_band = band;
+ cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv,
+ (u8) bss_new_entry->bss_band,
+ (u16)bss_new_entry->channel);
+
+ if (cfp)
+ bss_new_entry->freq = cfp->freq;
+ else
+ bss_new_entry->freq = 0;
+
+ /* Copy the locally created bss_new_entry to the scan table */
+ memcpy(&adapter->scan_table[bss_idx], bss_new_entry,
+ sizeof(adapter->scan_table[bss_idx]));
+
+ }
+
+ dev_dbg(adapter->dev,
+ "info: SCAN_RESP: Scanned %2d APs, %d valid, %d total\n",
+ scan_rsp->number_of_sets,
+ num_in_table - adapter->num_in_scan_table, num_in_table);
+
+ /* Update the total number of BSSIDs in the scan table */
+ adapter->num_in_scan_table = num_in_table;
+
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ if (list_empty(&adapter->scan_pending_q)) {
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->scan_processing = false;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ /*
+ * Process the resulting scan table:
+ * - Remove any bad ssids
+ * - Update our current BSS information from scan data
+ */
+ mwifiex_process_scan_results(priv);
+
+ /* Need to indicate IOCTL complete */
+ if (adapter->curr_cmd->wait_q_enabled) {
+ adapter->cmd_wait_q.status = 0;
+ mwifiex_complete_cmd(adapter);
+ }
+ if (priv->report_scan_result)
+ priv->report_scan_result = false;
+ if (priv->scan_pending_on_block) {
+ priv->scan_pending_on_block = false;
+ up(&priv->async_sem);
+ }
+
+ } else {
+ /* Get scan command from scan_pending_q and put to
+ cmd_pending_q */
+ cmd_node = list_first_entry(&adapter->scan_pending_q,
+ struct cmd_ctrl_node, list);
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+
+ mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
+ }
+
+done:
+ kfree((u8 *) bss_new_entry);
+ return ret;
+}
+
+/*
+ * This function prepares command for background scan query.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Setting background scan flush parameter
+ * - Ensuring correct endian-ness
+ */
+int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command *cmd)
+{
+ struct host_cmd_ds_802_11_bg_scan_query *bg_query =
+ &cmd->params.bg_scan_query;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_QUERY);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query)
+ + S_DS_GEN);
+
+ bg_query->flush = 1;
+
+ return 0;
+}
+
+/*
+ * This function finds a SSID in the scan table.
+ *
+ * A BSSID may optionally be provided to qualify the SSID.
+ * For non-Auto mode, further check is made to make sure the
+ * BSS found in the scan table is compatible with the current
+ * settings of the driver.
+ */
+s32
+mwifiex_find_ssid_in_list(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *ssid, u8 *bssid,
+ u32 mode)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ s32 net = -1, j;
+ u8 best_rssi = 0;
+ u32 i;
+
+ dev_dbg(adapter->dev, "info: num of entries in table = %d\n",
+ adapter->num_in_scan_table);
+
+ /*
+ * Loop through the table until the maximum is reached or until a match
+ * is found based on the bssid field comparison
+ */
+ for (i = 0;
+ i < adapter->num_in_scan_table && (!bssid || (bssid && net < 0));
+ i++) {
+ if (!mwifiex_ssid_cmp(&adapter->scan_table[i].ssid, ssid) &&
+ (!bssid
+ || !memcmp(adapter->scan_table[i].mac_address, bssid,
+ ETH_ALEN))
+ &&
+ (mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv, (u8) adapter->scan_table[i].bss_band,
+ (u16) adapter->scan_table[i].channel))) {
+ switch (mode) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ j = mwifiex_is_network_compatible(priv, i,
+ mode);
+
+ if (j >= 0) {
+ if (SCAN_RSSI
+ (adapter->scan_table[i].rssi) >
+ best_rssi) {
+ best_rssi = SCAN_RSSI(adapter->
+ scan_table
+ [i].rssi);
+ net = i;
+ }
+ } else {
+ if (net == -1)
+ net = j;
+ }
+ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ default:
+ /*
+ * Do not check compatibility if the mode
+ * requested is Auto/Unknown. Allows generic
+ * find to work without verifying against the
+ * Adapter security settings
+ */
+ if (SCAN_RSSI(adapter->scan_table[i].rssi) >
+ best_rssi) {
+ best_rssi = SCAN_RSSI(adapter->
+ scan_table[i].rssi);
+ net = i;
+ }
+ break;
+ }
+ }
+ }
+
+ return net;
+}
+
+/*
+ * This function finds a specific compatible BSSID in the scan list.
+ *
+ * This function loops through the scan table looking for a compatible
+ * match. If a BSSID matches, but the BSS is found to be not compatible
+ * the function ignores it and continues to search through the rest of
+ * the entries in case there is an AP with multiple SSIDs assigned to
+ * the same BSSID.
+ */
+s32
+mwifiex_find_bssid_in_list(struct mwifiex_private *priv, u8 *bssid,
+ u32 mode)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ s32 net = -1;
+ u32 i;
+
+ if (!bssid)
+ return -1;
+
+ dev_dbg(adapter->dev, "info: FindBSSID: Num of BSSIDs = %d\n",
+ adapter->num_in_scan_table);
+
+ /*
+ * Look through the scan table for a compatible match. The ret return
+ * variable will be equal to the index in the scan table (greater
+ * than zero) if the network is compatible. The loop will continue
+ * past a matched bssid that is not compatible in case there is an
+ * AP with multiple SSIDs assigned to the same BSSID
+ */
+ for (i = 0; net < 0 && i < adapter->num_in_scan_table; i++) {
+ if (!memcmp
+ (adapter->scan_table[i].mac_address, bssid, ETH_ALEN)
+ && mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv,
+ (u8) adapter->
+ scan_table[i].
+ bss_band,
+ (u16) adapter->
+ scan_table[i].
+ channel)) {
+ switch (mode) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ net = mwifiex_is_network_compatible(priv, i,
+ mode);
+ break;
+ default:
+ net = i;
+ break;
+ }
+ }
+ }
+
+ return net;
+}
+
+/*
+ * This function inserts scan command node to the scan pending queue.
+ */
+void
+mwifiex_queue_scan_cmd(struct mwifiex_private *priv,
+ struct cmd_ctrl_node *cmd_node)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ unsigned long flags;
+
+ cmd_node->wait_q_enabled = true;
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ list_add_tail(&cmd_node->list, &adapter->scan_pending_q);
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+}
+
+/*
+ * This function finds an AP with specific ssid in the scan list.
+ */
+int mwifiex_find_best_network(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *req_ssid_bssid)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bssdescriptor *req_bss;
+ s32 i;
+
+ memset(req_ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));
+
+ i = mwifiex_find_best_network_in_list(priv);
+
+ if (i >= 0) {
+ req_bss = &adapter->scan_table[i];
+ memcpy(&req_ssid_bssid->ssid, &req_bss->ssid,
+ sizeof(struct mwifiex_802_11_ssid));
+ memcpy((u8 *) &req_ssid_bssid->bssid,
+ (u8 *) &req_bss->mac_address, ETH_ALEN);
+
+ /* Make sure we are in the right mode */
+ if (priv->bss_mode == NL80211_IFTYPE_UNSPECIFIED)
+ priv->bss_mode = req_bss->bss_mode;
+ }
+
+ if (!req_ssid_bssid->ssid.ssid_len)
+ return -1;
+
+ dev_dbg(adapter->dev, "info: Best network found = [%s], "
+ "[%pM]\n", req_ssid_bssid->ssid.ssid,
+ req_ssid_bssid->bssid);
+
+ return 0;
+}
+
+/*
+ * This function sends a scan command for all available channels to the
+ * firmware, filtered on a specific SSID.
+ */
+static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *req_ssid)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int ret = 0;
+ struct mwifiex_user_scan_cfg *scan_cfg;
+
+ if (!req_ssid)
+ return -1;
+
+ if (adapter->scan_processing) {
+ dev_dbg(adapter->dev, "cmd: Scan already in process...\n");
+ return ret;
+ }
+
+ if (priv->scan_block) {
+ dev_dbg(adapter->dev,
+ "cmd: Scan is blocked during association...\n");
+ return ret;
+ }
+
+ mwifiex_scan_delete_ssid_table_entry(priv, req_ssid);
+
+ scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
+ if (!scan_cfg) {
+ dev_err(adapter->dev, "failed to alloc scan_cfg\n");
+ return -ENOMEM;
+ }
+
+ memcpy(scan_cfg->ssid_list[0].ssid, req_ssid->ssid,
+ req_ssid->ssid_len);
+ scan_cfg->keep_previous_scan = true;
+
+ ret = mwifiex_scan_networks(priv, scan_cfg);
+
+ kfree(scan_cfg);
+ return ret;
+}
+
+/*
+ * Sends IOCTL request to start a scan.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ *
+ * Scan command can be issued for both normal scan and specific SSID
+ * scan, depending upon whether an SSID is provided or not.
+ */
+int mwifiex_request_scan(struct mwifiex_private *priv,
+ struct mwifiex_802_11_ssid *req_ssid)
+{
+ int ret;
+
+ if (down_interruptible(&priv->async_sem)) {
+ dev_err(priv->adapter->dev, "%s: acquire semaphore\n",
+ __func__);
+ return -1;
+ }
+ priv->scan_pending_on_block = true;
+
+ priv->adapter->cmd_wait_q.condition = false;
+
+ if (req_ssid && req_ssid->ssid_len != 0)
+ /* Specific SSID scan */
+ ret = mwifiex_scan_specific_ssid(priv, req_ssid);
+ else
+ /* Normal scan */
+ ret = mwifiex_scan_networks(priv, NULL);
+
+ if (!ret)
+ ret = mwifiex_wait_queue_complete(priv->adapter);
+
+ if (ret == -1) {
+ priv->scan_pending_on_block = false;
+ up(&priv->async_sem);
+ }
+
+ return ret;
+}
+
+/*
+ * This function appends the vendor specific IE TLV to a buffer.
+ */
+int
+mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv,
+ u16 vsie_mask, u8 **buffer)
+{
+ int id, ret_len = 0;
+ struct mwifiex_ie_types_vendor_param_set *vs_param_set;
+
+ if (!buffer)
+ return 0;
+ if (!(*buffer))
+ return 0;
+
+ /*
+ * Traverse through the saved vendor specific IE array and append
+ * the selected(scan/assoc/adhoc) IE as TLV to the command
+ */
+ for (id = 0; id < MWIFIEX_MAX_VSIE_NUM; id++) {
+ if (priv->vs_ie[id].mask & vsie_mask) {
+ vs_param_set =
+ (struct mwifiex_ie_types_vendor_param_set *)
+ *buffer;
+ vs_param_set->header.type =
+ cpu_to_le16(TLV_TYPE_PASSTHROUGH);
+ vs_param_set->header.len =
+ cpu_to_le16((((u16) priv->vs_ie[id].ie[1])
+ & 0x00FF) + 2);
+ memcpy(vs_param_set->ie, priv->vs_ie[id].ie,
+ le16_to_cpu(vs_param_set->header.len));
+ *buffer += le16_to_cpu(vs_param_set->header.len) +
+ sizeof(struct mwifiex_ie_types_header);
+ ret_len += le16_to_cpu(vs_param_set->header.len) +
+ sizeof(struct mwifiex_ie_types_header);
+ }
+ }
+ return ret_len;
+}
+
+/*
+ * This function saves a beacon buffer of the current BSS descriptor.
+ *
+ * The current beacon buffer is saved so that it can be restored in the
+ * following cases that makes the beacon buffer not to contain the current
+ * ssid's beacon buffer.
+ * - The current ssid was not found somehow in the last scan.
+ * - The current ssid was the last entry of the scan table and overloaded.
+ */
+void
+mwifiex_save_curr_bcn(struct mwifiex_private *priv)
+{
+ struct mwifiex_bssdescriptor *curr_bss =
+ &priv->curr_bss_params.bss_descriptor;
+
+ if (!curr_bss->beacon_buf_size)
+ return;
+
+ /* allocate beacon buffer at 1st time; or if it's size has changed */
+ if (!priv->curr_bcn_buf ||
+ priv->curr_bcn_size != curr_bss->beacon_buf_size) {
+ priv->curr_bcn_size = curr_bss->beacon_buf_size;
+
+ kfree(priv->curr_bcn_buf);
+ priv->curr_bcn_buf = kzalloc(curr_bss->beacon_buf_size,
+ GFP_KERNEL);
+ if (!priv->curr_bcn_buf) {
+ dev_err(priv->adapter->dev,
+ "failed to alloc curr_bcn_buf\n");
+ return;
+ }
+ }
+
+ memcpy(priv->curr_bcn_buf, curr_bss->beacon_buf,
+ curr_bss->beacon_buf_size);
+ dev_dbg(priv->adapter->dev, "info: current beacon saved %d\n",
+ priv->curr_bcn_size);
+}
+
+/*
+ * This function frees the current BSS descriptor beacon buffer.
+ */
+void
+mwifiex_free_curr_bcn(struct mwifiex_private *priv)
+{
+ kfree(priv->curr_bcn_buf);
+ priv->curr_bcn_buf = NULL;
+}
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
new file mode 100644
index 0000000..d425dbd
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -0,0 +1,1754 @@
+/*
+ * Marvell Wireless LAN device driver: SDIO specific handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/firmware.h>
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+#include "sdio.h"
+
+
+#define SDIO_VERSION "1.0"
+
+static struct mwifiex_if_ops sdio_ops;
+
+static struct semaphore add_remove_card_sem;
+
+/*
+ * SDIO probe.
+ *
+ * This function probes an mwifiex device and registers it. It allocates
+ * the card structure, enables SDIO function number and initiates the
+ * device registration and initialization procedure by adding a logical
+ * interface.
+ */
+static int
+mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
+{
+ int ret;
+ struct sdio_mmc_card *card = NULL;
+
+ pr_debug("info: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n",
+ func->vendor, func->device, func->class, func->num);
+
+ card = kzalloc(sizeof(struct sdio_mmc_card), GFP_KERNEL);
+ if (!card) {
+ pr_err("%s: failed to alloc memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ card->func = func;
+
+ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
+ sdio_claim_host(func);
+ ret = sdio_enable_func(func);
+ sdio_release_host(func);
+
+ if (ret) {
+ pr_err("%s: failed to enable function\n", __func__);
+ kfree(card);
+ return -EIO;
+ }
+
+ if (mwifiex_add_card(card, &add_remove_card_sem, &sdio_ops)) {
+ pr_err("%s: add card failed\n", __func__);
+ kfree(card);
+ sdio_claim_host(func);
+ ret = sdio_disable_func(func);
+ sdio_release_host(func);
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*
+ * SDIO remove.
+ *
+ * This function removes the interface and frees up the card structure.
+ */
+static void
+mwifiex_sdio_remove(struct sdio_func *func)
+{
+ struct sdio_mmc_card *card;
+
+ pr_debug("info: SDIO func num=%d\n", func->num);
+
+ if (func) {
+ card = sdio_get_drvdata(func);
+ if (card) {
+ mwifiex_remove_card(card->adapter,
+ &add_remove_card_sem);
+ kfree(card);
+ }
+ }
+}
+
+/*
+ * SDIO suspend.
+ *
+ * Kernel needs to suspend all functions separately. Therefore all
+ * registered functions must have drivers with suspend and resume
+ * methods. Failing that the kernel simply removes the whole card.
+ *
+ * If already not suspended, this function allocates and sends a host
+ * sleep activate request to the firmware and turns off the traffic.
+ */
+static int mwifiex_sdio_suspend(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct sdio_mmc_card *card;
+ struct mwifiex_adapter *adapter;
+ mmc_pm_flag_t pm_flag = 0;
+ int hs_actived = 0;
+ int i;
+ int ret = 0;
+
+ if (func) {
+ pm_flag = sdio_get_host_pm_caps(func);
+ pr_debug("cmd: %s: suspend: PM flag = 0x%x\n",
+ sdio_func_id(func), pm_flag);
+ if (!(pm_flag & MMC_PM_KEEP_POWER)) {
+ pr_err("%s: cannot remain alive while host is"
+ " suspended\n", sdio_func_id(func));
+ return -ENOSYS;
+ }
+
+ card = sdio_get_drvdata(func);
+ if (!card || !card->adapter) {
+ pr_err("suspend: invalid card or adapter\n");
+ return 0;
+ }
+ } else {
+ pr_err("suspend: sdio_func is not specified\n");
+ return 0;
+ }
+
+ adapter = card->adapter;
+
+ /* Enable the Host Sleep */
+ hs_actived = mwifiex_enable_hs(adapter);
+ if (hs_actived) {
+ pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n");
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ }
+
+ /* Indicate device suspended */
+ adapter->is_suspended = true;
+
+ for (i = 0; i < adapter->priv_num; i++)
+ netif_carrier_off(adapter->priv[i]->netdev);
+
+ return ret;
+}
+
+/*
+ * SDIO resume.
+ *
+ * Kernel needs to suspend all functions separately. Therefore all
+ * registered functions must have drivers with suspend and resume
+ * methods. Failing that the kernel simply removes the whole card.
+ *
+ * If already not resumed, this function turns on the traffic and
+ * sends a host sleep cancel request to the firmware.
+ */
+static int mwifiex_sdio_resume(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct sdio_mmc_card *card;
+ struct mwifiex_adapter *adapter;
+ mmc_pm_flag_t pm_flag = 0;
+ int i;
+
+ if (func) {
+ pm_flag = sdio_get_host_pm_caps(func);
+ card = sdio_get_drvdata(func);
+ if (!card || !card->adapter) {
+ pr_err("resume: invalid card or adapter\n");
+ return 0;
+ }
+ } else {
+ pr_err("resume: sdio_func is not specified\n");
+ return 0;
+ }
+
+ adapter = card->adapter;
+
+ if (!adapter->is_suspended) {
+ dev_warn(adapter->dev, "device already resumed\n");
+ return 0;
+ }
+
+ adapter->is_suspended = false;
+
+ for (i = 0; i < adapter->priv_num; i++)
+ if (adapter->priv[i]->media_connected)
+ netif_carrier_on(adapter->priv[i]->netdev);
+
+ /* Disable Host Sleep */
+ mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
+ MWIFIEX_ASYNC_CMD);
+
+ return 0;
+}
+
+/* Device ID for SD8787 */
+#define SDIO_DEVICE_ID_MARVELL_8787 (0x9119)
+
+/* WLAN IDs */
+static const struct sdio_device_id mwifiex_ids[] = {
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787)},
+ {},
+};
+
+MODULE_DEVICE_TABLE(sdio, mwifiex_ids);
+
+static const struct dev_pm_ops mwifiex_sdio_pm_ops = {
+ .suspend = mwifiex_sdio_suspend,
+ .resume = mwifiex_sdio_resume,
+};
+
+static struct sdio_driver mwifiex_sdio = {
+ .name = "mwifiex_sdio",
+ .id_table = mwifiex_ids,
+ .probe = mwifiex_sdio_probe,
+ .remove = mwifiex_sdio_remove,
+ .drv = {
+ .owner = THIS_MODULE,
+ .pm = &mwifiex_sdio_pm_ops,
+ }
+};
+
+/*
+ * This function writes data into SDIO card register.
+ */
+static int
+mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = -1;
+
+ sdio_claim_host(card->func);
+ sdio_writeb(card->func, (u8) data, reg, &ret);
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+/*
+ * This function reads data from SDIO card register.
+ */
+static int
+mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u32 *data)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = -1;
+ u8 val;
+
+ sdio_claim_host(card->func);
+ val = sdio_readb(card->func, reg, &ret);
+ sdio_release_host(card->func);
+
+ *data = val;
+
+ return ret;
+}
+
+/*
+ * This function writes multiple data into SDIO card memory.
+ *
+ * This does not work in suspended mode.
+ */
+static int
+mwifiex_write_data_sync(struct mwifiex_adapter *adapter,
+ u8 *buffer, u32 pkt_len, u32 port)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = -1;
+ u8 blk_mode =
+ (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE;
+ u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1;
+ u32 blk_cnt =
+ (blk_mode ==
+ BLOCK_MODE) ? (pkt_len /
+ MWIFIEX_SDIO_BLOCK_SIZE) : pkt_len;
+ u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK);
+
+ if (adapter->is_suspended) {
+ dev_err(adapter->dev,
+ "%s: not allowed while suspended\n", __func__);
+ return -1;
+ }
+
+ sdio_claim_host(card->func);
+
+ if (!sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size))
+ ret = 0;
+
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+/*
+ * This function reads multiple data from SDIO card memory.
+ */
+static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer,
+ u32 len, u32 port, u8 claim)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = -1;
+ u8 blk_mode =
+ (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE;
+ u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1;
+ u32 blk_cnt =
+ (blk_mode ==
+ BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE) : len;
+ u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK);
+
+ if (claim)
+ sdio_claim_host(card->func);
+
+ if (!sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size))
+ ret = 0;
+
+ if (claim)
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+/*
+ * This function wakes up the card.
+ *
+ * A host power up command is written to the card configuration
+ * register to wake up the card.
+ */
+static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter)
+{
+ dev_dbg(adapter->dev, "event: wakeup device...\n");
+
+ return mwifiex_write_reg(adapter, CONFIGURATION_REG, HOST_POWER_UP);
+}
+
+/*
+ * This function is called after the card has woken up.
+ *
+ * The card configuration register is reset.
+ */
+static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
+{
+ dev_dbg(adapter->dev, "cmd: wakeup device completed\n");
+
+ return mwifiex_write_reg(adapter, CONFIGURATION_REG, 0);
+}
+
+/*
+ * This function initializes the IO ports.
+ *
+ * The following operations are performed -
+ * - Read the IO ports (0, 1 and 2)
+ * - Set host interrupt Reset-To-Read to clear
+ * - Set auto re-enable interrupt
+ */
+static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
+{
+ u32 reg;
+
+ adapter->ioport = 0;
+
+ /* Read the IO port */
+ if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, ®))
+ adapter->ioport |= (reg & 0xff);
+ else
+ return -1;
+
+ if (!mwifiex_read_reg(adapter, IO_PORT_1_REG, ®))
+ adapter->ioport |= ((reg & 0xff) << 8);
+ else
+ return -1;
+
+ if (!mwifiex_read_reg(adapter, IO_PORT_2_REG, ®))
+ adapter->ioport |= ((reg & 0xff) << 16);
+ else
+ return -1;
+
+ pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport);
+
+ /* Set Host interrupt reset to read to clear */
+ if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, ®))
+ mwifiex_write_reg(adapter, HOST_INT_RSR_REG,
+ reg | SDIO_INT_MASK);
+ else
+ return -1;
+
+ /* Dnld/Upld ready set to auto reset */
+ if (!mwifiex_read_reg(adapter, CARD_MISC_CFG_REG, ®))
+ mwifiex_write_reg(adapter, CARD_MISC_CFG_REG,
+ reg | AUTO_RE_ENABLE_INT);
+ else
+ return -1;
+
+ return 0;
+}
+
+/*
+ * This function sends data to the card.
+ */
+static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter,
+ u8 *payload, u32 pkt_len, u32 port)
+{
+ u32 i = 0;
+ int ret;
+
+ do {
+ ret = mwifiex_write_data_sync(adapter, payload, pkt_len, port);
+ if (ret) {
+ i++;
+ dev_err(adapter->dev, "host_to_card, write iomem"
+ " (%d) failed: %d\n", i, ret);
+ if (mwifiex_write_reg(adapter,
+ CONFIGURATION_REG, 0x04))
+ dev_err(adapter->dev, "write CFG reg failed\n");
+
+ ret = -1;
+ if (i > MAX_WRITE_IOMEM_RETRY)
+ return ret;
+ }
+ } while (ret == -1);
+
+ return ret;
+}
+
+/*
+ * This function gets the read port.
+ *
+ * If control port bit is set in MP read bitmap, the control port
+ * is returned, otherwise the current read port is returned and
+ * the value is increased (provided it does not reach the maximum
+ * limit, in which case it is reset to 1)
+ */
+static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ u16 rd_bitmap = card->mp_rd_bitmap;
+
+ dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%04x\n", rd_bitmap);
+
+ if (!(rd_bitmap & (CTRL_PORT_MASK | DATA_PORT_MASK)))
+ return -1;
+
+ if (card->mp_rd_bitmap & CTRL_PORT_MASK) {
+ card->mp_rd_bitmap &= (u16) (~CTRL_PORT_MASK);
+ *port = CTRL_PORT;
+ dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%04x\n",
+ *port, card->mp_rd_bitmap);
+ } else {
+ if (card->mp_rd_bitmap & (1 << card->curr_rd_port)) {
+ card->mp_rd_bitmap &=
+ (u16) (~(1 << card->curr_rd_port));
+ *port = card->curr_rd_port;
+
+ if (++card->curr_rd_port == MAX_PORT)
+ card->curr_rd_port = 1;
+ } else {
+ return -1;
+ }
+
+ dev_dbg(adapter->dev,
+ "data: port=%d mp_rd_bitmap=0x%04x -> 0x%04x\n",
+ *port, rd_bitmap, card->mp_rd_bitmap);
+ }
+ return 0;
+}
+
+/*
+ * This function gets the write port for data.
+ *
+ * The current write port is returned if available and the value is
+ * increased (provided it does not reach the maximum limit, in which
+ * case it is reset to 1)
+ */
+static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u8 *port)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ u16 wr_bitmap = card->mp_wr_bitmap;
+
+ dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%04x\n", wr_bitmap);
+
+ if (!(wr_bitmap & card->mp_data_port_mask))
+ return -1;
+
+ if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) {
+ card->mp_wr_bitmap &= (u16) (~(1 << card->curr_wr_port));
+ *port = card->curr_wr_port;
+ if (++card->curr_wr_port == card->mp_end_port)
+ card->curr_wr_port = 1;
+ } else {
+ adapter->data_sent = true;
+ return -EBUSY;
+ }
+
+ if (*port == CTRL_PORT) {
+ dev_err(adapter->dev, "invalid data port=%d cur port=%d"
+ " mp_wr_bitmap=0x%04x -> 0x%04x\n",
+ *port, card->curr_wr_port, wr_bitmap,
+ card->mp_wr_bitmap);
+ return -1;
+ }
+
+ dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%04x -> 0x%04x\n",
+ *port, wr_bitmap, card->mp_wr_bitmap);
+
+ return 0;
+}
+
+/*
+ * This function polls the card status.
+ */
+static int
+mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
+{
+ u32 tries;
+ u32 cs;
+
+ for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+ if (mwifiex_read_reg(adapter, CARD_STATUS_REG, &cs))
+ break;
+ else if ((cs & bits) == bits)
+ return 0;
+
+ udelay(10);
+ }
+
+ dev_err(adapter->dev, "poll card status failed, tries = %d\n",
+ tries);
+ return -1;
+}
+
+/*
+ * This function reads the firmware status.
+ */
+static int
+mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
+{
+ u32 fws0, fws1;
+
+ if (mwifiex_read_reg(adapter, CARD_FW_STATUS0_REG, &fws0))
+ return -1;
+
+ if (mwifiex_read_reg(adapter, CARD_FW_STATUS1_REG, &fws1))
+ return -1;
+
+ *dat = (u16) ((fws1 << 8) | fws0);
+
+ return 0;
+}
+
+/*
+ * This function disables the host interrupt.
+ *
+ * The host interrupt mask is read, the disable bit is reset and
+ * written back to the card host interrupt mask register.
+ */
+static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
+{
+ u32 host_int_mask;
+
+ /* Read back the host_int_mask register */
+ if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
+ return -1;
+
+ /* Update with the mask and write back to the register */
+ host_int_mask &= ~HOST_INT_DISABLE;
+
+ if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) {
+ dev_err(adapter->dev, "disable host interrupt failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * This function enables the host interrupt.
+ *
+ * The host interrupt enable mask is written to the card
+ * host interrupt mask register.
+ */
+static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
+{
+ /* Simply write the mask to the register */
+ if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, HOST_INT_ENABLE)) {
+ dev_err(adapter->dev, "enable host interrupt failed\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * This function sends a data buffer to the card.
+ */
+static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter,
+ u32 *type, u8 *buffer,
+ u32 npayload, u32 ioport)
+{
+ int ret;
+ u32 nb;
+
+ if (!buffer) {
+ dev_err(adapter->dev, "%s: buffer is NULL\n", __func__);
+ return -1;
+ }
+
+ ret = mwifiex_read_data_sync(adapter, buffer, npayload, ioport, 1);
+
+ if (ret) {
+ dev_err(adapter->dev, "%s: read iomem failed: %d\n", __func__,
+ ret);
+ return -1;
+ }
+
+ nb = le16_to_cpu(*(__le16 *) (buffer));
+ if (nb > npayload) {
+ dev_err(adapter->dev, "%s: invalid packet, nb=%d, npayload=%d\n",
+ __func__, nb, npayload);
+ return -1;
+ }
+
+ *type = le16_to_cpu(*(__le16 *) (buffer + 2));
+
+ return ret;
+}
+
+/*
+ * This function downloads the firmware to the card.
+ *
+ * Firmware is downloaded to the card in blocks. Every block download
+ * is tested for CRC errors, and retried a number of times before
+ * returning failure.
+ */
+static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
+ struct mwifiex_fw_image *fw)
+{
+ int ret;
+ u8 *firmware = fw->fw_buf;
+ u32 firmware_len = fw->fw_len;
+ u32 offset = 0;
+ u32 base0, base1;
+ u8 *fwbuf;
+ u16 len = 0;
+ u32 txlen, tx_blocks = 0, tries;
+ u32 i = 0;
+
+ if (!firmware_len) {
+ dev_err(adapter->dev, "firmware image not found!"
+ " Terminating download\n");
+ return -1;
+ }
+
+ dev_dbg(adapter->dev, "info: downloading FW image (%d bytes)\n",
+ firmware_len);
+
+ /* Assume that the allocated buffer is 8-byte aligned */
+ fwbuf = kzalloc(MWIFIEX_UPLD_SIZE, GFP_KERNEL);
+ if (!fwbuf) {
+ dev_err(adapter->dev, "unable to alloc buffer for firmware."
+ " Terminating download\n");
+ return -ENOMEM;
+ }
+
+ /* Perform firmware data transfer */
+ do {
+ /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY
+ bits */
+ ret = mwifiex_sdio_poll_card_status(adapter, CARD_IO_READY |
+ DN_LD_CARD_RDY);
+ if (ret) {
+ dev_err(adapter->dev, "FW download with helper:"
+ " poll status timeout @ %d\n", offset);
+ goto done;
+ }
+
+ /* More data? */
+ if (offset >= firmware_len)
+ break;
+
+ for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+ ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_0,
+ &base0);
+ if (ret) {
+ dev_err(adapter->dev, "dev BASE0 register read"
+ " failed: base0=0x%04X(%d). Terminating "
+ "download\n", base0, base0);
+ goto done;
+ }
+ ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_1,
+ &base1);
+ if (ret) {
+ dev_err(adapter->dev, "dev BASE1 register read"
+ " failed: base1=0x%04X(%d). Terminating "
+ "download\n", base1, base1);
+ goto done;
+ }
+ len = (u16) (((base1 & 0xff) << 8) | (base0 & 0xff));
+
+ if (len)
+ break;
+
+ udelay(10);
+ }
+
+ if (!len) {
+ break;
+ } else if (len > MWIFIEX_UPLD_SIZE) {
+ dev_err(adapter->dev, "FW download failed @ %d,"
+ " invalid length %d\n", offset, len);
+ ret = -1;
+ goto done;
+ }
+
+ txlen = len;
+
+ if (len & BIT(0)) {
+ i++;
+ if (i > MAX_WRITE_IOMEM_RETRY) {
+ dev_err(adapter->dev, "FW download failed @"
+ " %d, over max retry count\n", offset);
+ ret = -1;
+ goto done;
+ }
+ dev_err(adapter->dev, "CRC indicated by the helper:"
+ " len = 0x%04X, txlen = %d\n", len, txlen);
+ len &= ~BIT(0);
+ /* Setting this to 0 to resend from same offset */
+ txlen = 0;
+ } else {
+ i = 0;
+
+ /* Set blocksize to transfer - checking for last
+ block */
+ if (firmware_len - offset < txlen)
+ txlen = firmware_len - offset;
+
+ tx_blocks = (txlen + MWIFIEX_SDIO_BLOCK_SIZE -
+ 1) / MWIFIEX_SDIO_BLOCK_SIZE;
+
+ /* Copy payload to buffer */
+ memmove(fwbuf, &firmware[offset], txlen);
+ }
+
+ ret = mwifiex_write_data_sync(adapter, fwbuf, tx_blocks *
+ MWIFIEX_SDIO_BLOCK_SIZE,
+ adapter->ioport);
+ if (ret) {
+ dev_err(adapter->dev, "FW download, write iomem (%d)"
+ " failed @ %d\n", i, offset);
+ if (mwifiex_write_reg(adapter, CONFIGURATION_REG, 0x04))
+ dev_err(adapter->dev, "write CFG reg failed\n");
+
+ ret = -1;
+ goto done;
+ }
+
+ offset += txlen;
+ } while (true);
+
+ dev_dbg(adapter->dev, "info: FW download over, size %d bytes\n",
+ offset);
+
+ ret = 0;
+done:
+ kfree(fwbuf);
+ return ret;
+}
+
+/*
+ * This function checks the firmware status in card.
+ *
+ * The winner interface is also determined by this function.
+ */
+static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
+ u32 poll_num, int *winner)
+{
+ int ret = 0;
+ u16 firmware_stat;
+ u32 tries;
+ u32 winner_status;
+
+ /* Wait for firmware initialization event */
+ for (tries = 0; tries < poll_num; tries++) {
+ ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat);
+ if (ret)
+ continue;
+ if (firmware_stat == FIRMWARE_READY) {
+ ret = 0;
+ break;
+ } else {
+ mdelay(100);
+ ret = -1;
+ }
+ }
+
+ if (winner && ret) {
+ if (mwifiex_read_reg
+ (adapter, CARD_FW_STATUS0_REG, &winner_status))
+ winner_status = 0;
+
+ if (winner_status)
+ *winner = 0;
+ else
+ *winner = 1;
+ }
+ return ret;
+}
+
+/*
+ * This function reads the interrupt status from card.
+ */
+static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ u32 sdio_ireg;
+ unsigned long flags;
+
+ if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS,
+ REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK,
+ 0)) {
+ dev_err(adapter->dev, "read mp_regs failed\n");
+ return;
+ }
+
+ sdio_ireg = card->mp_regs[HOST_INTSTATUS_REG];
+ if (sdio_ireg) {
+ /*
+ * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+ * Clear the interrupt status register
+ */
+ dev_dbg(adapter->dev, "int: sdio_ireg = %#x\n", sdio_ireg);
+ spin_lock_irqsave(&adapter->int_lock, flags);
+ adapter->int_status |= sdio_ireg;
+ spin_unlock_irqrestore(&adapter->int_lock, flags);
+ }
+}
+
+/*
+ * SDIO interrupt handler.
+ *
+ * This function reads the interrupt status from firmware and assigns
+ * the main process in workqueue which will handle the interrupt.
+ */
+static void
+mwifiex_sdio_interrupt(struct sdio_func *func)
+{
+ struct mwifiex_adapter *adapter;
+ struct sdio_mmc_card *card;
+
+ card = sdio_get_drvdata(func);
+ if (!card || !card->adapter) {
+ pr_debug("int: func=%p card=%p adapter=%p\n",
+ func, card, card ? card->adapter : NULL);
+ return;
+ }
+ adapter = card->adapter;
+
+ if (adapter->surprise_removed)
+ return;
+
+ if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP)
+ adapter->ps_state = PS_STATE_AWAKE;
+
+ mwifiex_interrupt_status(adapter);
+ queue_work(adapter->workqueue, &adapter->main_work);
+}
+
+/*
+ * This function decodes a received packet.
+ *
+ * Based on the type, the packet is treated as either a data, or
+ * a command response, or an event, and the correct handler
+ * function is invoked.
+ */
+static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb, u32 upld_typ)
+{
+ u8 *cmd_buf;
+
+ skb_pull(skb, INTF_HEADER_LEN);
+
+ switch (upld_typ) {
+ case MWIFIEX_TYPE_DATA:
+ dev_dbg(adapter->dev, "info: --- Rx: Data packet ---\n");
+ mwifiex_handle_rx_packet(adapter, skb);
+ break;
+
+ case MWIFIEX_TYPE_CMD:
+ dev_dbg(adapter->dev, "info: --- Rx: Cmd Response ---\n");
+ /* take care of curr_cmd = NULL case */
+ if (!adapter->curr_cmd) {
+ cmd_buf = adapter->upld_buf;
+
+ if (adapter->ps_state == PS_STATE_SLEEP_CFM)
+ mwifiex_process_sleep_confirm_resp(adapter,
+ skb->data, skb->len);
+
+ memcpy(cmd_buf, skb->data, min_t(u32,
+ MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len));
+
+ dev_kfree_skb_any(skb);
+ } else {
+ adapter->cmd_resp_received = true;
+ adapter->curr_cmd->resp_skb = skb;
+ }
+ break;
+
+ case MWIFIEX_TYPE_EVENT:
+ dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
+ adapter->event_cause = *(u32 *) skb->data;
+
+ skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
+
+ if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE))
+ memcpy(adapter->event_body, skb->data, skb->len);
+
+ /* event cause has been saved to adapter->event_cause */
+ adapter->event_received = true;
+ adapter->event_skb = skb;
+
+ break;
+
+ default:
+ dev_err(adapter->dev, "unknown upload type %#x\n", upld_typ);
+ dev_kfree_skb_any(skb);
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * This function transfers received packets from card to driver, performing
+ * aggregation if required.
+ *
+ * For data received on control port, or if aggregation is disabled, the
+ * received buffers are uploaded as separate packets. However, if aggregation
+ * is enabled and required, the buffers are copied onto an aggregation buffer,
+ * provided there is space left, processed and finally uploaded.
+ */
+static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb, u8 port)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ s32 f_do_rx_aggr = 0;
+ s32 f_do_rx_cur = 0;
+ s32 f_aggr_cur = 0;
+ struct sk_buff *skb_deaggr;
+ u32 pind;
+ u32 pkt_len, pkt_type = 0;
+ u8 *curr_ptr;
+ u32 rx_len = skb->len;
+
+ if (port == CTRL_PORT) {
+ /* Read the command Resp without aggr */
+ dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
+ "response\n", __func__);
+
+ f_do_rx_cur = 1;
+ goto rx_curr_single;
+ }
+
+ if (!card->mpa_rx.enabled) {
+ dev_dbg(adapter->dev, "info: %s: rx aggregation disabled\n",
+ __func__);
+
+ f_do_rx_cur = 1;
+ goto rx_curr_single;
+ }
+
+ if (card->mp_rd_bitmap & (~((u16) CTRL_PORT_MASK))) {
+ /* Some more data RX pending */
+ dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
+
+ if (MP_RX_AGGR_IN_PROGRESS(card)) {
+ if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len)) {
+ f_aggr_cur = 1;
+ } else {
+ /* No room in Aggr buf, do rx aggr now */
+ f_do_rx_aggr = 1;
+ f_do_rx_cur = 1;
+ }
+ } else {
+ /* Rx aggr not in progress */
+ f_aggr_cur = 1;
+ }
+
+ } else {
+ /* No more data RX pending */
+ dev_dbg(adapter->dev, "info: %s: last packet\n", __func__);
+
+ if (MP_RX_AGGR_IN_PROGRESS(card)) {
+ f_do_rx_aggr = 1;
+ if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len))
+ f_aggr_cur = 1;
+ else
+ /* No room in Aggr buf, do rx aggr now */
+ f_do_rx_cur = 1;
+ } else {
+ f_do_rx_cur = 1;
+ }
+ }
+
+ if (f_aggr_cur) {
+ dev_dbg(adapter->dev, "info: current packet aggregation\n");
+ /* Curr pkt can be aggregated */
+ MP_RX_AGGR_SETUP(card, skb, port);
+
+ if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) ||
+ MP_RX_AGGR_PORT_LIMIT_REACHED(card)) {
+ dev_dbg(adapter->dev, "info: %s: aggregated packet "
+ "limit reached\n", __func__);
+ /* No more pkts allowed in Aggr buf, rx it */
+ f_do_rx_aggr = 1;
+ }
+ }
+
+ if (f_do_rx_aggr) {
+ /* do aggr RX now */
+ dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
+ card->mpa_rx.pkt_cnt);
+
+ if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
+ card->mpa_rx.buf_len,
+ (adapter->ioport | 0x1000 |
+ (card->mpa_rx.ports << 4)) +
+ card->mpa_rx.start_port, 1))
+ return -1;
+
+ curr_ptr = card->mpa_rx.buf;
+
+ for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) {
+
+ /* get curr PKT len & type */
+ pkt_len = *(u16 *) &curr_ptr[0];
+ pkt_type = *(u16 *) &curr_ptr[2];
+
+ /* copy pkt to deaggr buf */
+ skb_deaggr = card->mpa_rx.skb_arr[pind];
+
+ if ((pkt_type == MWIFIEX_TYPE_DATA) && (pkt_len <=
+ card->mpa_rx.len_arr[pind])) {
+
+ memcpy(skb_deaggr->data, curr_ptr, pkt_len);
+
+ skb_trim(skb_deaggr, pkt_len);
+
+ /* Process de-aggr packet */
+ mwifiex_decode_rx_packet(adapter, skb_deaggr,
+ pkt_type);
+ } else {
+ dev_err(adapter->dev, "wrong aggr pkt:"
+ " type=%d len=%d max_len=%d\n",
+ pkt_type, pkt_len,
+ card->mpa_rx.len_arr[pind]);
+ dev_kfree_skb_any(skb_deaggr);
+ }
+ curr_ptr += card->mpa_rx.len_arr[pind];
+ }
+ MP_RX_AGGR_BUF_RESET(card);
+ }
+
+rx_curr_single:
+ if (f_do_rx_cur) {
+ dev_dbg(adapter->dev, "info: RX: port: %d, rx_len: %d\n",
+ port, rx_len);
+
+ if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
+ skb->data, skb->len,
+ adapter->ioport + port))
+ return -1;
+
+ mwifiex_decode_rx_packet(adapter, skb, pkt_type);
+ }
+
+ return 0;
+}
+
+/*
+ * This function checks the current interrupt status.
+ *
+ * The following interrupts are checked and handled by this function -
+ * - Data sent
+ * - Command sent
+ * - Packets received
+ *
+ * Since the firmware does not generate download ready interrupt if the
+ * port updated is command port only, command sent interrupt checking
+ * should be done manually, and for every SDIO interrupt.
+ *
+ * In case of Rx packets received, the packets are uploaded from card to
+ * host and processed accordingly.
+ */
+static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = 0;
+ u8 sdio_ireg;
+ struct sk_buff *skb;
+ u8 port = CTRL_PORT;
+ u32 len_reg_l, len_reg_u;
+ u32 rx_blocks;
+ u16 rx_len;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->int_lock, flags);
+ sdio_ireg = adapter->int_status;
+ adapter->int_status = 0;
+ spin_unlock_irqrestore(&adapter->int_lock, flags);
+
+ if (!sdio_ireg)
+ return ret;
+
+ if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
+ card->mp_wr_bitmap = ((u16) card->mp_regs[WR_BITMAP_U]) << 8;
+ card->mp_wr_bitmap |= (u16) card->mp_regs[WR_BITMAP_L];
+ dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%04x\n",
+ card->mp_wr_bitmap);
+ if (adapter->data_sent &&
+ (card->mp_wr_bitmap & card->mp_data_port_mask)) {
+ dev_dbg(adapter->dev,
+ "info: <--- Tx DONE Interrupt --->\n");
+ adapter->data_sent = false;
+ }
+ }
+
+ /* As firmware will not generate download ready interrupt if the port
+ updated is command port only, cmd_sent should be done for any SDIO
+ interrupt. */
+ if (adapter->cmd_sent) {
+ /* Check if firmware has attach buffer at command port and
+ update just that in wr_bit_map. */
+ card->mp_wr_bitmap |=
+ (u16) card->mp_regs[WR_BITMAP_L] & CTRL_PORT_MASK;
+ if (card->mp_wr_bitmap & CTRL_PORT_MASK)
+ adapter->cmd_sent = false;
+ }
+
+ dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n",
+ adapter->cmd_sent, adapter->data_sent);
+ if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
+ card->mp_rd_bitmap = ((u16) card->mp_regs[RD_BITMAP_U]) << 8;
+ card->mp_rd_bitmap |= (u16) card->mp_regs[RD_BITMAP_L];
+ dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%04x\n",
+ card->mp_rd_bitmap);
+
+ while (true) {
+ ret = mwifiex_get_rd_port(adapter, &port);
+ if (ret) {
+ dev_dbg(adapter->dev,
+ "info: no more rd_port available\n");
+ break;
+ }
+ len_reg_l = RD_LEN_P0_L + (port << 1);
+ len_reg_u = RD_LEN_P0_U + (port << 1);
+ rx_len = ((u16) card->mp_regs[len_reg_u]) << 8;
+ rx_len |= (u16) card->mp_regs[len_reg_l];
+ dev_dbg(adapter->dev, "info: RX: port=%d rx_len=%u\n",
+ port, rx_len);
+ rx_blocks =
+ (rx_len + MWIFIEX_SDIO_BLOCK_SIZE -
+ 1) / MWIFIEX_SDIO_BLOCK_SIZE;
+ if (rx_len <= INTF_HEADER_LEN
+ || (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
+ MWIFIEX_RX_DATA_BUF_SIZE) {
+ dev_err(adapter->dev, "invalid rx_len=%d\n",
+ rx_len);
+ return -1;
+ }
+ rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE);
+
+ skb = dev_alloc_skb(rx_len);
+
+ if (!skb) {
+ dev_err(adapter->dev, "%s: failed to alloc skb",
+ __func__);
+ return -1;
+ }
+
+ skb_put(skb, rx_len);
+
+ dev_dbg(adapter->dev, "info: rx_len = %d skb->len = %d\n",
+ rx_len, skb->len);
+
+ if (mwifiex_sdio_card_to_host_mp_aggr(adapter, skb,
+ port)) {
+ u32 cr = 0;
+
+ dev_err(adapter->dev, "card_to_host_mpa failed:"
+ " int status=%#x\n", sdio_ireg);
+ if (mwifiex_read_reg(adapter,
+ CONFIGURATION_REG, &cr))
+ dev_err(adapter->dev,
+ "read CFG reg failed\n");
+
+ dev_dbg(adapter->dev,
+ "info: CFG reg val = %d\n", cr);
+ if (mwifiex_write_reg(adapter,
+ CONFIGURATION_REG,
+ (cr | 0x04)))
+ dev_err(adapter->dev,
+ "write CFG reg failed\n");
+
+ dev_dbg(adapter->dev, "info: write success\n");
+ if (mwifiex_read_reg(adapter,
+ CONFIGURATION_REG, &cr))
+ dev_err(adapter->dev,
+ "read CFG reg failed\n");
+
+ dev_dbg(adapter->dev,
+ "info: CFG reg val =%x\n", cr);
+ dev_kfree_skb_any(skb);
+ return -1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function aggregates transmission buffers in driver and downloads
+ * the aggregated packet to card.
+ *
+ * The individual packets are aggregated by copying into an aggregation
+ * buffer and then downloaded to the card. Previous unsent packets in the
+ * aggregation buffer are pre-copied first before new packets are added.
+ * Aggregation is done till there is space left in the aggregation buffer,
+ * or till new packets are available.
+ *
+ * The function will only download the packet to the card when aggregation
+ * stops, otherwise it will just aggregate the packet in aggregation buffer
+ * and return.
+ */
+static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
+ u8 *payload, u32 pkt_len, u8 port,
+ u32 next_pkt_len)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = 0;
+ s32 f_send_aggr_buf = 0;
+ s32 f_send_cur_buf = 0;
+ s32 f_precopy_cur_buf = 0;
+ s32 f_postcopy_cur_buf = 0;
+
+ if ((!card->mpa_tx.enabled) || (port == CTRL_PORT)) {
+ dev_dbg(adapter->dev, "info: %s: tx aggregation disabled\n",
+ __func__);
+
+ f_send_cur_buf = 1;
+ goto tx_curr_single;
+ }
+
+ if (next_pkt_len) {
+ /* More pkt in TX queue */
+ dev_dbg(adapter->dev, "info: %s: more packets in queue.\n",
+ __func__);
+
+ if (MP_TX_AGGR_IN_PROGRESS(card)) {
+ if (!MP_TX_AGGR_PORT_LIMIT_REACHED(card) &&
+ MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) {
+ f_precopy_cur_buf = 1;
+
+ if (!(card->mp_wr_bitmap &
+ (1 << card->curr_wr_port))
+ || !MP_TX_AGGR_BUF_HAS_ROOM(
+ card, next_pkt_len))
+ f_send_aggr_buf = 1;
+ } else {
+ /* No room in Aggr buf, send it */
+ f_send_aggr_buf = 1;
+
+ if (MP_TX_AGGR_PORT_LIMIT_REACHED(card) ||
+ !(card->mp_wr_bitmap &
+ (1 << card->curr_wr_port)))
+ f_send_cur_buf = 1;
+ else
+ f_postcopy_cur_buf = 1;
+ }
+ } else {
+ if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)
+ && (card->mp_wr_bitmap & (1 << card->curr_wr_port)))
+ f_precopy_cur_buf = 1;
+ else
+ f_send_cur_buf = 1;
+ }
+ } else {
+ /* Last pkt in TX queue */
+ dev_dbg(adapter->dev, "info: %s: Last packet in Tx Queue.\n",
+ __func__);
+
+ if (MP_TX_AGGR_IN_PROGRESS(card)) {
+ /* some packs in Aggr buf already */
+ f_send_aggr_buf = 1;
+
+ if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len))
+ f_precopy_cur_buf = 1;
+ else
+ /* No room in Aggr buf, send it */
+ f_send_cur_buf = 1;
+ } else {
+ f_send_cur_buf = 1;
+ }
+ }
+
+ if (f_precopy_cur_buf) {
+ dev_dbg(adapter->dev, "data: %s: precopy current buffer\n",
+ __func__);
+ MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port);
+
+ if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) ||
+ MP_TX_AGGR_PORT_LIMIT_REACHED(card))
+ /* No more pkts allowed in Aggr buf, send it */
+ f_send_aggr_buf = 1;
+ }
+
+ if (f_send_aggr_buf) {
+ dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n",
+ __func__,
+ card->mpa_tx.start_port, card->mpa_tx.ports);
+ ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf,
+ card->mpa_tx.buf_len,
+ (adapter->ioport | 0x1000 |
+ (card->mpa_tx.ports << 4)) +
+ card->mpa_tx.start_port);
+
+ MP_TX_AGGR_BUF_RESET(card);
+ }
+
+tx_curr_single:
+ if (f_send_cur_buf) {
+ dev_dbg(adapter->dev, "data: %s: send current buffer %d\n",
+ __func__, port);
+ ret = mwifiex_write_data_to_card(adapter, payload, pkt_len,
+ adapter->ioport + port);
+ }
+
+ if (f_postcopy_cur_buf) {
+ dev_dbg(adapter->dev, "data: %s: postcopy current buffer\n",
+ __func__);
+ MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port);
+ }
+
+ return ret;
+}
+
+/*
+ * This function downloads data from driver to card.
+ *
+ * Both commands and data packets are transferred to the card by this
+ * function.
+ *
+ * This function adds the SDIO specific header to the front of the buffer
+ * before transferring. The header contains the length of the packet and
+ * the type. The firmware handles the packets based upon this set type.
+ */
+static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
+ u8 type, u8 *payload, u32 pkt_len,
+ struct mwifiex_tx_param *tx_param)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret;
+ u32 buf_block_len;
+ u32 blk_size;
+ u8 port = CTRL_PORT;
+
+ /* Allocate buffer and copy payload */
+ blk_size = MWIFIEX_SDIO_BLOCK_SIZE;
+ buf_block_len = (pkt_len + blk_size - 1) / blk_size;
+ *(u16 *) &payload[0] = (u16) pkt_len;
+ *(u16 *) &payload[2] = type;
+
+ /*
+ * This is SDIO specific header
+ * u16 length,
+ * u16 type (MWIFIEX_TYPE_DATA = 0, MWIFIEX_TYPE_CMD = 1,
+ * MWIFIEX_TYPE_EVENT = 3)
+ */
+ if (type == MWIFIEX_TYPE_DATA) {
+ ret = mwifiex_get_wr_port_data(adapter, &port);
+ if (ret) {
+ dev_err(adapter->dev, "%s: no wr_port available\n",
+ __func__);
+ return ret;
+ }
+ } else {
+ adapter->cmd_sent = true;
+ /* Type must be MWIFIEX_TYPE_CMD */
+
+ if (pkt_len <= INTF_HEADER_LEN ||
+ pkt_len > MWIFIEX_UPLD_SIZE)
+ dev_err(adapter->dev, "%s: payload=%p, nb=%d\n",
+ __func__, payload, pkt_len);
+ }
+
+ /* Transfer data to card */
+ pkt_len = buf_block_len * blk_size;
+
+ if (tx_param)
+ ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len,
+ port, tx_param->next_pkt_len);
+ else
+ ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len,
+ port, 0);
+
+ if (ret) {
+ if (type == MWIFIEX_TYPE_CMD)
+ adapter->cmd_sent = false;
+ if (type == MWIFIEX_TYPE_DATA)
+ adapter->data_sent = false;
+ } else {
+ if (type == MWIFIEX_TYPE_DATA) {
+ if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port)))
+ adapter->data_sent = true;
+ else
+ adapter->data_sent = false;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * This function allocates the MPA Tx and Rx buffers.
+ */
+static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
+ u32 mpa_tx_buf_size, u32 mpa_rx_buf_size)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret = 0;
+
+ card->mpa_tx.buf = kzalloc(mpa_tx_buf_size, GFP_KERNEL);
+ if (!card->mpa_tx.buf) {
+ dev_err(adapter->dev, "could not alloc buffer for MP-A TX\n");
+ ret = -1;
+ goto error;
+ }
+
+ card->mpa_tx.buf_size = mpa_tx_buf_size;
+
+ card->mpa_rx.buf = kzalloc(mpa_rx_buf_size, GFP_KERNEL);
+ if (!card->mpa_rx.buf) {
+ dev_err(adapter->dev, "could not alloc buffer for MP-A RX\n");
+ ret = -1;
+ goto error;
+ }
+
+ card->mpa_rx.buf_size = mpa_rx_buf_size;
+
+error:
+ if (ret) {
+ kfree(card->mpa_tx.buf);
+ kfree(card->mpa_rx.buf);
+ }
+
+ return ret;
+}
+
+/*
+ * This function unregisters the SDIO device.
+ *
+ * The SDIO IRQ is released, the function is disabled and driver
+ * data is set to null.
+ */
+static void
+mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
+{
+ struct sdio_mmc_card *card = adapter->card;
+
+ if (adapter->card) {
+ /* Release the SDIO IRQ */
+ sdio_claim_host(card->func);
+ sdio_release_irq(card->func);
+ sdio_disable_func(card->func);
+ sdio_release_host(card->func);
+ sdio_set_drvdata(card->func, NULL);
+ }
+}
+
+/*
+ * This function registers the SDIO device.
+ *
+ * SDIO IRQ is claimed, block size is set and driver data is initialized.
+ */
+static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
+{
+ int ret = 0;
+ struct sdio_mmc_card *card = adapter->card;
+ struct sdio_func *func = card->func;
+
+ /* save adapter pointer in card */
+ card->adapter = adapter;
+
+ sdio_claim_host(func);
+
+ /* Request the SDIO IRQ */
+ ret = sdio_claim_irq(func, mwifiex_sdio_interrupt);
+ if (ret) {
+ pr_err("claim irq failed: ret=%d\n", ret);
+ goto disable_func;
+ }
+
+ /* Set block size */
+ ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE);
+ if (ret) {
+ pr_err("cannot set SDIO block size\n");
+ ret = -1;
+ goto release_irq;
+ }
+
+ sdio_release_host(func);
+ sdio_set_drvdata(func, card);
+
+ adapter->dev = &func->dev;
+
+ return 0;
+
+release_irq:
+ sdio_release_irq(func);
+disable_func:
+ sdio_disable_func(func);
+ sdio_release_host(func);
+ adapter->card = NULL;
+
+ return -1;
+}
+
+/*
+ * This function initializes the SDIO driver.
+ *
+ * The following initializations steps are followed -
+ * - Read the Host interrupt status register to acknowledge
+ * the first interrupt got from bootloader
+ * - Disable host interrupt mask register
+ * - Get SDIO port
+ * - Get revision ID
+ * - Initialize SDIO variables in card
+ * - Allocate MP registers
+ * - Allocate MPA Tx and Rx buffers
+ */
+static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int ret;
+ u32 sdio_ireg;
+
+ /*
+ * Read the HOST_INT_STATUS_REG for ACK the first interrupt got
+ * from the bootloader. If we don't do this we get a interrupt
+ * as soon as we register the irq.
+ */
+ mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg);
+
+ /* Disable host interrupt mask register for SDIO */
+ mwifiex_sdio_disable_host_int(adapter);
+
+ /* Get SDIO ioport */
+ mwifiex_init_sdio_ioport(adapter);
+
+ /* Get revision ID */
+#define REV_ID_REG 0x5c
+ mwifiex_read_reg(adapter, REV_ID_REG, &adapter->revision_id);
+
+ /* Initialize SDIO variables in card */
+ card->mp_rd_bitmap = 0;
+ card->mp_wr_bitmap = 0;
+ card->curr_rd_port = 1;
+ card->curr_wr_port = 1;
+
+ card->mp_data_port_mask = DATA_PORT_MASK;
+
+ card->mpa_tx.buf_len = 0;
+ card->mpa_tx.pkt_cnt = 0;
+ card->mpa_tx.start_port = 0;
+
+ card->mpa_tx.enabled = 0;
+ card->mpa_tx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+
+ card->mpa_rx.buf_len = 0;
+ card->mpa_rx.pkt_cnt = 0;
+ card->mpa_rx.start_port = 0;
+
+ card->mpa_rx.enabled = 0;
+ card->mpa_rx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+
+ /* Allocate buffers for SDIO MP-A */
+ card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL);
+ if (!card->mp_regs) {
+ dev_err(adapter->dev, "failed to alloc mp_regs\n");
+ return -ENOMEM;
+ }
+
+ ret = mwifiex_alloc_sdio_mpa_buffers(adapter,
+ SDIO_MP_TX_AGGR_DEF_BUF_SIZE,
+ SDIO_MP_RX_AGGR_DEF_BUF_SIZE);
+ if (ret) {
+ dev_err(adapter->dev, "failed to alloc sdio mp-a buffers\n");
+ kfree(card->mp_regs);
+ return -1;
+ }
+
+ return ret;
+}
+
+/*
+ * This function resets the MPA Tx and Rx buffers.
+ */
+static void mwifiex_cleanup_mpa_buf(struct mwifiex_adapter *adapter)
+{
+ struct sdio_mmc_card *card = adapter->card;
+
+ MP_TX_AGGR_BUF_RESET(card);
+ MP_RX_AGGR_BUF_RESET(card);
+}
+
+/*
+ * This function cleans up the allocated card buffers.
+ *
+ * The following are freed by this function -
+ * - MP registers
+ * - MPA Tx buffer
+ * - MPA Rx buffer
+ */
+static void mwifiex_cleanup_sdio(struct mwifiex_adapter *adapter)
+{
+ struct sdio_mmc_card *card = adapter->card;
+
+ kfree(card->mp_regs);
+ kfree(card->mpa_tx.buf);
+ kfree(card->mpa_rx.buf);
+}
+
+/*
+ * This function updates the MP end port in card.
+ */
+static void
+mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
+{
+ struct sdio_mmc_card *card = adapter->card;
+ int i;
+
+ card->mp_end_port = port;
+
+ card->mp_data_port_mask = DATA_PORT_MASK;
+
+ for (i = 1; i <= MAX_PORT - card->mp_end_port; i++)
+ card->mp_data_port_mask &= ~(1 << (MAX_PORT - i));
+
+ card->curr_wr_port = 1;
+
+ dev_dbg(adapter->dev, "cmd: mp_end_port %d, data port mask 0x%x\n",
+ port, card->mp_data_port_mask);
+}
+
+static struct mwifiex_if_ops sdio_ops = {
+ .init_if = mwifiex_init_sdio,
+ .cleanup_if = mwifiex_cleanup_sdio,
+ .check_fw_status = mwifiex_check_fw_status,
+ .prog_fw = mwifiex_prog_fw_w_helper,
+ .register_dev = mwifiex_register_dev,
+ .unregister_dev = mwifiex_unregister_dev,
+ .enable_int = mwifiex_sdio_enable_host_int,
+ .process_int_status = mwifiex_process_int_status,
+ .host_to_card = mwifiex_sdio_host_to_card,
+ .wakeup = mwifiex_pm_wakeup_card,
+ .wakeup_complete = mwifiex_pm_wakeup_card_complete,
+
+ /* SDIO specific */
+ .update_mp_end_port = mwifiex_update_mp_end_port,
+ .cleanup_mpa_buf = mwifiex_cleanup_mpa_buf,
+};
+
+/*
+ * This function initializes the SDIO driver.
+ *
+ * This initiates the semaphore and registers the device with
+ * SDIO bus.
+ */
+static int
+mwifiex_sdio_init_module(void)
+{
+ sema_init(&add_remove_card_sem, 1);
+
+ return sdio_register_driver(&mwifiex_sdio);
+}
+
+/*
+ * This function cleans up the SDIO driver.
+ *
+ * The following major steps are followed for cleanup -
+ * - Resume the device if its suspended
+ * - Disconnect the device if connected
+ * - Shutdown the firmware
+ * - Unregister the device from SDIO bus.
+ */
+static void
+mwifiex_sdio_cleanup_module(void)
+{
+ struct mwifiex_adapter *adapter = g_adapter;
+ int i;
+
+ if (down_interruptible(&add_remove_card_sem))
+ goto exit_sem_err;
+
+ if (!adapter || !adapter->priv_num)
+ goto exit;
+
+ if (adapter->is_suspended)
+ mwifiex_sdio_resume(adapter->dev);
+
+ for (i = 0; i < adapter->priv_num; i++)
+ if ((GET_BSS_ROLE(adapter->priv[i]) == MWIFIEX_BSS_ROLE_STA) &&
+ adapter->priv[i]->media_connected)
+ mwifiex_deauthenticate(adapter->priv[i], NULL);
+
+ if (!adapter->surprise_removed)
+ mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter,
+ MWIFIEX_BSS_ROLE_ANY),
+ MWIFIEX_FUNC_SHUTDOWN);
+
+exit:
+ up(&add_remove_card_sem);
+
+exit_sem_err:
+ sdio_unregister_driver(&mwifiex_sdio);
+}
+
+module_init(mwifiex_sdio_init_module);
+module_exit(mwifiex_sdio_cleanup_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION);
+MODULE_VERSION(SDIO_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE("sd8787.bin");
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
new file mode 100644
index 0000000..a0e9bc5
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -0,0 +1,305 @@
+/*
+ * Marvell Wireless LAN device driver: SDIO specific definitions
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_SDIO_H
+#define _MWIFIEX_SDIO_H
+
+
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+
+#include "main.h"
+
+#define BLOCK_MODE 1
+#define BYTE_MODE 0
+
+#define REG_PORT 0
+#define RD_BITMAP_L 0x04
+#define RD_BITMAP_U 0x05
+#define WR_BITMAP_L 0x06
+#define WR_BITMAP_U 0x07
+#define RD_LEN_P0_L 0x08
+#define RD_LEN_P0_U 0x09
+
+#define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff
+
+#define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000
+
+#define CTRL_PORT 0
+#define CTRL_PORT_MASK 0x0001
+#define DATA_PORT_MASK 0xfffe
+
+#define MAX_MP_REGS 64
+#define MAX_PORT 16
+
+#define SDIO_MP_AGGR_DEF_PKT_LIMIT 8
+
+#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE (4096) /* 4K */
+
+/* Multi port RX aggregation buffer size */
+#define SDIO_MP_RX_AGGR_DEF_BUF_SIZE (4096) /* 4K */
+
+/* Misc. Config Register : Auto Re-enable interrupts */
+#define AUTO_RE_ENABLE_INT BIT(4)
+
+/* Host Control Registers */
+/* Host Control Registers : I/O port 0 */
+#define IO_PORT_0_REG 0x78
+/* Host Control Registers : I/O port 1 */
+#define IO_PORT_1_REG 0x79
+/* Host Control Registers : I/O port 2 */
+#define IO_PORT_2_REG 0x7A
+
+/* Host Control Registers : Configuration */
+#define CONFIGURATION_REG 0x00
+/* Host Control Registers : Host without Command 53 finish host*/
+#define HOST_TO_CARD_EVENT (0x1U << 3)
+/* Host Control Registers : Host without Command 53 finish host */
+#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2)
+/* Host Control Registers : Host power up */
+#define HOST_POWER_UP (0x1U << 1)
+/* Host Control Registers : Host power down */
+#define HOST_POWER_DOWN (0x1U << 0)
+
+/* Host Control Registers : Host interrupt mask */
+#define HOST_INT_MASK_REG 0x02
+/* Host Control Registers : Upload host interrupt mask */
+#define UP_LD_HOST_INT_MASK (0x1U)
+/* Host Control Registers : Download host interrupt mask */
+#define DN_LD_HOST_INT_MASK (0x2U)
+/* Enable Host interrupt mask */
+#define HOST_INT_ENABLE (UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
+/* Disable Host interrupt mask */
+#define HOST_INT_DISABLE 0xff
+
+/* Host Control Registers : Host interrupt status */
+#define HOST_INTSTATUS_REG 0x03
+/* Host Control Registers : Upload host interrupt status */
+#define UP_LD_HOST_INT_STATUS (0x1U)
+/* Host Control Registers : Download host interrupt status */
+#define DN_LD_HOST_INT_STATUS (0x2U)
+
+/* Host Control Registers : Host interrupt RSR */
+#define HOST_INT_RSR_REG 0x01
+/* Host Control Registers : Upload host interrupt RSR */
+#define UP_LD_HOST_INT_RSR (0x1U)
+#define SDIO_INT_MASK 0x3F
+
+/* Host Control Registers : Host interrupt status */
+#define HOST_INT_STATUS_REG 0x28
+/* Host Control Registers : Upload CRC error */
+#define UP_LD_CRC_ERR (0x1U << 2)
+/* Host Control Registers : Upload restart */
+#define UP_LD_RESTART (0x1U << 1)
+/* Host Control Registers : Download restart */
+#define DN_LD_RESTART (0x1U << 0)
+
+/* Card Control Registers : Card status register */
+#define CARD_STATUS_REG 0x30
+/* Card Control Registers : Card I/O ready */
+#define CARD_IO_READY (0x1U << 3)
+/* Card Control Registers : CIS card ready */
+#define CIS_CARD_RDY (0x1U << 2)
+/* Card Control Registers : Upload card ready */
+#define UP_LD_CARD_RDY (0x1U << 1)
+/* Card Control Registers : Download card ready */
+#define DN_LD_CARD_RDY (0x1U << 0)
+
+/* Card Control Registers : Host interrupt mask register */
+#define HOST_INTERRUPT_MASK_REG 0x34
+/* Card Control Registers : Host power interrupt mask */
+#define HOST_POWER_INT_MASK (0x1U << 3)
+/* Card Control Registers : Abort card interrupt mask */
+#define ABORT_CARD_INT_MASK (0x1U << 2)
+/* Card Control Registers : Upload card interrupt mask */
+#define UP_LD_CARD_INT_MASK (0x1U << 1)
+/* Card Control Registers : Download card interrupt mask */
+#define DN_LD_CARD_INT_MASK (0x1U << 0)
+
+/* Card Control Registers : Card interrupt status register */
+#define CARD_INTERRUPT_STATUS_REG 0x38
+/* Card Control Registers : Power up interrupt */
+#define POWER_UP_INT (0x1U << 4)
+/* Card Control Registers : Power down interrupt */
+#define POWER_DOWN_INT (0x1U << 3)
+
+/* Card Control Registers : Card interrupt RSR register */
+#define CARD_INTERRUPT_RSR_REG 0x3c
+/* Card Control Registers : Power up RSR */
+#define POWER_UP_RSR (0x1U << 4)
+/* Card Control Registers : Power down RSR */
+#define POWER_DOWN_RSR (0x1U << 3)
+
+/* Card Control Registers : Miscellaneous Configuration Register */
+#define CARD_MISC_CFG_REG 0x6C
+
+/* Host F1 read base 0 */
+#define HOST_F1_RD_BASE_0 0x0040
+/* Host F1 read base 1 */
+#define HOST_F1_RD_BASE_1 0x0041
+/* Host F1 card ready */
+#define HOST_F1_CARD_RDY 0x0020
+
+/* Firmware status 0 register */
+#define CARD_FW_STATUS0_REG 0x60
+/* Firmware status 1 register */
+#define CARD_FW_STATUS1_REG 0x61
+/* Rx length register */
+#define CARD_RX_LEN_REG 0x62
+/* Rx unit register */
+#define CARD_RX_UNIT_REG 0x63
+
+/* Event header Len*/
+#define MWIFIEX_EVENT_HEADER_LEN 8
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY 2
+
+/* SDIO Tx aggregation in progress ? */
+#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0)
+
+/* SDIO Tx aggregation buffer room for next packet ? */
+#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len) \
+ <= a->mpa_tx.buf_size)
+
+/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
+#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \
+ memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len], \
+ payload, pkt_len); \
+ a->mpa_tx.buf_len += pkt_len; \
+ if (!a->mpa_tx.pkt_cnt) \
+ a->mpa_tx.start_port = port; \
+ if (a->mpa_tx.start_port <= port) \
+ a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt)); \
+ else \
+ a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \
+ a->mp_end_port))); \
+ a->mpa_tx.pkt_cnt++; \
+} while (0);
+
+/* SDIO Tx aggregation limit ? */
+#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \
+ (a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)
+
+/* SDIO Tx aggregation port limit ? */
+#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port < \
+ a->mpa_tx.start_port) && (((MAX_PORT - \
+ a->mpa_tx.start_port) + a->curr_wr_port) >= \
+ SDIO_MP_AGGR_DEF_PKT_LIMIT))
+
+/* Reset SDIO Tx aggregation buffer parameters */
+#define MP_TX_AGGR_BUF_RESET(a) do { \
+ a->mpa_tx.pkt_cnt = 0; \
+ a->mpa_tx.buf_len = 0; \
+ a->mpa_tx.ports = 0; \
+ a->mpa_tx.start_port = 0; \
+} while (0);
+
+/* SDIO Rx aggregation limit ? */
+#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \
+ (a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)
+
+/* SDIO Tx aggregation port limit ? */
+#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port < \
+ a->mpa_rx.start_port) && (((MAX_PORT - \
+ a->mpa_rx.start_port) + a->curr_rd_port) >= \
+ SDIO_MP_AGGR_DEF_PKT_LIMIT))
+
+/* SDIO Rx aggregation in progress ? */
+#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
+
+/* SDIO Rx aggregation buffer room for next packet ? */
+#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) \
+ ((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)
+
+/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
+#define MP_RX_AGGR_SETUP(a, skb, port) do { \
+ a->mpa_rx.buf_len += skb->len; \
+ if (!a->mpa_rx.pkt_cnt) \
+ a->mpa_rx.start_port = port; \
+ if (a->mpa_rx.start_port <= port) \
+ a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt)); \
+ else \
+ a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1)); \
+ a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb; \
+ a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len; \
+ a->mpa_rx.pkt_cnt++; \
+} while (0);
+
+/* Reset SDIO Rx aggregation buffer parameters */
+#define MP_RX_AGGR_BUF_RESET(a) do { \
+ a->mpa_rx.pkt_cnt = 0; \
+ a->mpa_rx.buf_len = 0; \
+ a->mpa_rx.ports = 0; \
+ a->mpa_rx.start_port = 0; \
+} while (0);
+
+
+/* data structure for SDIO MPA TX */
+struct mwifiex_sdio_mpa_tx {
+ /* multiport tx aggregation buffer pointer */
+ u8 *buf;
+ u32 buf_len;
+ u32 pkt_cnt;
+ u16 ports;
+ u16 start_port;
+ u8 enabled;
+ u32 buf_size;
+ u32 pkt_aggr_limit;
+};
+
+struct mwifiex_sdio_mpa_rx {
+ u8 *buf;
+ u32 buf_len;
+ u32 pkt_cnt;
+ u16 ports;
+ u16 start_port;
+
+ struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
+ u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
+
+ u8 enabled;
+ u32 buf_size;
+ u32 pkt_aggr_limit;
+};
+
+int mwifiex_bus_register(void);
+void mwifiex_bus_unregister(void);
+
+struct sdio_mmc_card {
+ struct sdio_func *func;
+ struct mwifiex_adapter *adapter;
+
+ u16 mp_rd_bitmap;
+ u16 mp_wr_bitmap;
+
+ u16 mp_end_port;
+ u16 mp_data_port_mask;
+
+ u8 curr_rd_port;
+ u8 curr_wr_port;
+
+ u8 *mp_regs;
+
+ struct mwifiex_sdio_mpa_tx mpa_tx;
+ struct mwifiex_sdio_mpa_rx mpa_rx;
+};
+#endif /* _MWIFIEX_SDIO_H */
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
new file mode 100644
index 0000000..8af3a78
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -0,0 +1,1219 @@
+/*
+ * Marvell Wireless LAN device driver: station command handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+/*
+ * This function prepares command to set/get RSSI information.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting data/beacon average factors
+ * - Resetting SNR/NF/RSSI values in private structure
+ * - Ensuring correct endian-ness
+ */
+static int
+mwifiex_cmd_802_11_rssi_info(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd, u16 cmd_action)
+{
+ cmd->command = cpu_to_le16(HostCmd_CMD_RSSI_INFO);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_rssi_info) +
+ S_DS_GEN);
+ cmd->params.rssi_info.action = cpu_to_le16(cmd_action);
+ cmd->params.rssi_info.ndata = cpu_to_le16(priv->data_avg_factor);
+ cmd->params.rssi_info.nbcn = cpu_to_le16(priv->bcn_avg_factor);
+
+ /* Reset SNR/NF/RSSI values in private structure */
+ priv->data_rssi_last = 0;
+ priv->data_nf_last = 0;
+ priv->data_rssi_avg = 0;
+ priv->data_nf_avg = 0;
+ priv->bcn_rssi_last = 0;
+ priv->bcn_nf_last = 0;
+ priv->bcn_rssi_avg = 0;
+ priv->bcn_nf_avg = 0;
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set MAC control.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_mac_control(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct host_cmd_ds_mac_control *mac_ctrl = &cmd->params.mac_ctrl;
+ u16 action = *((u16 *) data_buf);
+
+ if (cmd_action != HostCmd_ACT_GEN_SET) {
+ dev_err(priv->adapter->dev,
+ "mac_control: only support set cmd\n");
+ return -1;
+ }
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_MAC_CONTROL);
+ cmd->size =
+ cpu_to_le16(sizeof(struct host_cmd_ds_mac_control) + S_DS_GEN);
+ mac_ctrl->action = cpu_to_le16(action);
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get SNMP MIB.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting SNMP MIB OID number and value
+ * (as required)
+ * - Ensuring correct endian-ness
+ *
+ * The following SNMP MIB OIDs are supported -
+ * - FRAG_THRESH_I : Fragmentation threshold
+ * - RTS_THRESH_I : RTS threshold
+ * - SHORT_RETRY_LIM_I : Short retry limit
+ * - DOT11D_I : 11d support
+ */
+static int mwifiex_cmd_802_11_snmp_mib(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action, u32 cmd_oid,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_snmp_mib *snmp_mib = &cmd->params.smib;
+ u32 ul_temp;
+
+ dev_dbg(priv->adapter->dev, "cmd: SNMP_CMD: cmd_oid = 0x%x\n", cmd_oid);
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SNMP_MIB);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_snmp_mib)
+ - 1 + S_DS_GEN);
+
+ if (cmd_action == HostCmd_ACT_GEN_GET) {
+ snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_GET);
+ snmp_mib->buf_size = cpu_to_le16(MAX_SNMP_BUF_SIZE);
+ cmd->size = cpu_to_le16(le16_to_cpu(cmd->size)
+ + MAX_SNMP_BUF_SIZE);
+ }
+
+ switch (cmd_oid) {
+ case FRAG_THRESH_I:
+ snmp_mib->oid = cpu_to_le16((u16) FRAG_THRESH_I);
+ if (cmd_action == HostCmd_ACT_GEN_SET) {
+ snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET);
+ snmp_mib->buf_size = cpu_to_le16(sizeof(u16));
+ ul_temp = *((u32 *) data_buf);
+ *((__le16 *) (snmp_mib->value)) =
+ cpu_to_le16((u16) ul_temp);
+ cmd->size = cpu_to_le16(le16_to_cpu(cmd->size)
+ + sizeof(u16));
+ }
+ break;
+ case RTS_THRESH_I:
+ snmp_mib->oid = cpu_to_le16((u16) RTS_THRESH_I);
+ if (cmd_action == HostCmd_ACT_GEN_SET) {
+ snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET);
+ snmp_mib->buf_size = cpu_to_le16(sizeof(u16));
+ ul_temp = *((u32 *) data_buf);
+ *(__le16 *) (snmp_mib->value) =
+ cpu_to_le16((u16) ul_temp);
+ cmd->size = cpu_to_le16(le16_to_cpu(cmd->size)
+ + sizeof(u16));
+ }
+ break;
+
+ case SHORT_RETRY_LIM_I:
+ snmp_mib->oid = cpu_to_le16((u16) SHORT_RETRY_LIM_I);
+ if (cmd_action == HostCmd_ACT_GEN_SET) {
+ snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET);
+ snmp_mib->buf_size = cpu_to_le16(sizeof(u16));
+ ul_temp = (*(u32 *) data_buf);
+ *((__le16 *) (snmp_mib->value)) =
+ cpu_to_le16((u16) ul_temp);
+ cmd->size = cpu_to_le16(le16_to_cpu(cmd->size)
+ + sizeof(u16));
+ }
+ break;
+ case DOT11D_I:
+ snmp_mib->oid = cpu_to_le16((u16) DOT11D_I);
+ if (cmd_action == HostCmd_ACT_GEN_SET) {
+ snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET);
+ snmp_mib->buf_size = cpu_to_le16(sizeof(u16));
+ ul_temp = *(u32 *) data_buf;
+ *((__le16 *) (snmp_mib->value)) =
+ cpu_to_le16((u16) ul_temp);
+ cmd->size = cpu_to_le16(le16_to_cpu(cmd->size)
+ + sizeof(u16));
+ }
+ break;
+ default:
+ break;
+ }
+ dev_dbg(priv->adapter->dev,
+ "cmd: SNMP_CMD: Action=0x%x, OID=0x%x, OIDSize=0x%x,"
+ " Value=0x%x\n",
+ cmd_action, cmd_oid, le16_to_cpu(snmp_mib->buf_size),
+ le16_to_cpu(*(__le16 *) snmp_mib->value));
+ return 0;
+}
+
+/*
+ * This function prepares command to get log.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Ensuring correct endian-ness
+ */
+static int
+mwifiex_cmd_802_11_get_log(struct host_cmd_ds_command *cmd)
+{
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_GET_LOG);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_get_log) +
+ S_DS_GEN);
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get Tx data rate configuration.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting configuration index, rate scope and rate drop pattern
+ * parameters (as required)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_tx_rate_cfg(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct host_cmd_ds_tx_rate_cfg *rate_cfg = &cmd->params.tx_rate_cfg;
+ struct mwifiex_rate_scope *rate_scope;
+ struct mwifiex_rate_drop_pattern *rate_drop;
+ u16 *pbitmap_rates = (u16 *) data_buf;
+
+ u32 i;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_TX_RATE_CFG);
+
+ rate_cfg->action = cpu_to_le16(cmd_action);
+ rate_cfg->cfg_index = 0;
+
+ rate_scope = (struct mwifiex_rate_scope *) ((u8 *) rate_cfg +
+ sizeof(struct host_cmd_ds_tx_rate_cfg));
+ rate_scope->type = cpu_to_le16(TLV_TYPE_RATE_SCOPE);
+ rate_scope->length = cpu_to_le16(sizeof(struct mwifiex_rate_scope) -
+ sizeof(struct mwifiex_ie_types_header));
+ if (pbitmap_rates != NULL) {
+ rate_scope->hr_dsss_rate_bitmap = cpu_to_le16(pbitmap_rates[0]);
+ rate_scope->ofdm_rate_bitmap = cpu_to_le16(pbitmap_rates[1]);
+ for (i = 0;
+ i < sizeof(rate_scope->ht_mcs_rate_bitmap) / sizeof(u16);
+ i++)
+ rate_scope->ht_mcs_rate_bitmap[i] =
+ cpu_to_le16(pbitmap_rates[2 + i]);
+ } else {
+ rate_scope->hr_dsss_rate_bitmap =
+ cpu_to_le16(priv->bitmap_rates[0]);
+ rate_scope->ofdm_rate_bitmap =
+ cpu_to_le16(priv->bitmap_rates[1]);
+ for (i = 0;
+ i < sizeof(rate_scope->ht_mcs_rate_bitmap) / sizeof(u16);
+ i++)
+ rate_scope->ht_mcs_rate_bitmap[i] =
+ cpu_to_le16(priv->bitmap_rates[2 + i]);
+ }
+
+ rate_drop = (struct mwifiex_rate_drop_pattern *) ((u8 *) rate_scope +
+ sizeof(struct mwifiex_rate_scope));
+ rate_drop->type = cpu_to_le16(TLV_TYPE_RATE_DROP_CONTROL);
+ rate_drop->length = cpu_to_le16(sizeof(rate_drop->rate_drop_mode));
+ rate_drop->rate_drop_mode = 0;
+
+ cmd->size =
+ cpu_to_le16(S_DS_GEN + sizeof(struct host_cmd_ds_tx_rate_cfg) +
+ sizeof(struct mwifiex_rate_scope) +
+ sizeof(struct mwifiex_rate_drop_pattern));
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get Tx power configuration.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting Tx power mode, power group TLV
+ * (as required)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_tx_power_cfg(struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct mwifiex_types_power_group *pg_tlv;
+ struct host_cmd_ds_txpwr_cfg *txp;
+ struct host_cmd_ds_txpwr_cfg *cmd_txp_cfg = &cmd->params.txp_cfg;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_TXPWR_CFG);
+ cmd->size =
+ cpu_to_le16(S_DS_GEN + sizeof(struct host_cmd_ds_txpwr_cfg));
+ switch (cmd_action) {
+ case HostCmd_ACT_GEN_SET:
+ txp = (struct host_cmd_ds_txpwr_cfg *) data_buf;
+ if (txp->mode) {
+ pg_tlv = (struct mwifiex_types_power_group
+ *) ((unsigned long) data_buf +
+ sizeof(struct host_cmd_ds_txpwr_cfg));
+ memmove(cmd_txp_cfg, data_buf,
+ sizeof(struct host_cmd_ds_txpwr_cfg) +
+ sizeof(struct mwifiex_types_power_group) +
+ pg_tlv->length);
+
+ pg_tlv = (struct mwifiex_types_power_group *) ((u8 *)
+ cmd_txp_cfg +
+ sizeof(struct host_cmd_ds_txpwr_cfg));
+ cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) +
+ sizeof(struct mwifiex_types_power_group) +
+ pg_tlv->length);
+ } else {
+ memmove(cmd_txp_cfg, data_buf,
+ sizeof(struct host_cmd_ds_txpwr_cfg));
+ }
+ cmd_txp_cfg->action = cpu_to_le16(cmd_action);
+ break;
+ case HostCmd_ACT_GEN_GET:
+ cmd_txp_cfg->action = cpu_to_le16(cmd_action);
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set Host Sleep configuration.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Setting Host Sleep action, conditions, ARP filters
+ * (as required)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11_hs_cfg(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action,
+ struct mwifiex_hs_config_param *data_buf)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11_hs_cfg_enh *hs_cfg = &cmd->params.opt_hs_cfg;
+ u16 hs_activate = false;
+
+ if (data_buf == NULL)
+ /* New Activate command */
+ hs_activate = true;
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_HS_CFG_ENH);
+
+ if (!hs_activate &&
+ (data_buf->conditions
+ != cpu_to_le32(HOST_SLEEP_CFG_CANCEL))
+ && ((adapter->arp_filter_size > 0)
+ && (adapter->arp_filter_size <= ARP_FILTER_MAX_BUF_SIZE))) {
+ dev_dbg(adapter->dev,
+ "cmd: Attach %d bytes ArpFilter to HSCfg cmd\n",
+ adapter->arp_filter_size);
+ memcpy(((u8 *) hs_cfg) +
+ sizeof(struct host_cmd_ds_802_11_hs_cfg_enh),
+ adapter->arp_filter, adapter->arp_filter_size);
+ cmd->size = cpu_to_le16(adapter->arp_filter_size +
+ sizeof(struct host_cmd_ds_802_11_hs_cfg_enh)
+ + S_DS_GEN);
+ } else {
+ cmd->size = cpu_to_le16(S_DS_GEN + sizeof(struct
+ host_cmd_ds_802_11_hs_cfg_enh));
+ }
+ if (hs_activate) {
+ hs_cfg->action = cpu_to_le16(HS_ACTIVATE);
+ hs_cfg->params.hs_activate.resp_ctrl = RESP_NEEDED;
+ } else {
+ hs_cfg->action = cpu_to_le16(HS_CONFIGURE);
+ hs_cfg->params.hs_config.conditions = data_buf->conditions;
+ hs_cfg->params.hs_config.gpio = data_buf->gpio;
+ hs_cfg->params.hs_config.gap = data_buf->gap;
+ dev_dbg(adapter->dev,
+ "cmd: HS_CFG_CMD: condition:0x%x gpio:0x%x gap:0x%x\n",
+ hs_cfg->params.hs_config.conditions,
+ hs_cfg->params.hs_config.gpio,
+ hs_cfg->params.hs_config.gap);
+ }
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get MAC address.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting MAC address (for SET only)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11_mac_address(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action)
+{
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_MAC_ADDRESS);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_mac_address) +
+ S_DS_GEN);
+ cmd->result = 0;
+
+ cmd->params.mac_addr.action = cpu_to_le16(cmd_action);
+
+ if (cmd_action == HostCmd_ACT_GEN_SET)
+ memcpy(cmd->params.mac_addr.mac_addr, priv->curr_addr,
+ ETH_ALEN);
+ return 0;
+}
+
+/*
+ * This function prepares command to set MAC multicast address.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting MAC multicast address
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_mac_multicast_adr(struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct mwifiex_multicast_list *mcast_list =
+ (struct mwifiex_multicast_list *) data_buf;
+ struct host_cmd_ds_mac_multicast_adr *mcast_addr = &cmd->params.mc_addr;
+
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_mac_multicast_adr) +
+ S_DS_GEN);
+ cmd->command = cpu_to_le16(HostCmd_CMD_MAC_MULTICAST_ADR);
+
+ mcast_addr->action = cpu_to_le16(cmd_action);
+ mcast_addr->num_of_adrs =
+ cpu_to_le16((u16) mcast_list->num_multicast_addr);
+ memcpy(mcast_addr->mac_list, mcast_list->mac_list,
+ mcast_list->num_multicast_addr * ETH_ALEN);
+
+ return 0;
+}
+
+/*
+ * This function prepares command to deauthenticate.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Setting AP MAC address and reason code
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11_deauthenticate(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_deauthenticate *deauth = &cmd->params.deauth;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_DEAUTHENTICATE);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_deauthenticate)
+ + S_DS_GEN);
+
+ /* Set AP MAC address */
+ memcpy(deauth->mac_addr, (u8 *) data_buf, ETH_ALEN);
+
+ dev_dbg(priv->adapter->dev, "cmd: Deauth: %pM\n", deauth->mac_addr);
+
+ deauth->reason_code = cpu_to_le16(WLAN_REASON_DEAUTH_LEAVING);
+
+ return 0;
+}
+
+/*
+ * This function prepares command to stop Ad-Hoc network.
+ *
+ * Preparation includes -
+ * - Setting command ID and proper size
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11_ad_hoc_stop(struct host_cmd_ds_command *cmd)
+{
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_STOP);
+ cmd->size = cpu_to_le16(S_DS_GEN);
+ return 0;
+}
+
+/*
+ * This function sets WEP key(s) to key parameter TLV(s).
+ *
+ * Multi-key parameter TLVs are supported, so we can send multiple
+ * WEP keys in a single buffer.
+ */
+static int
+mwifiex_set_keyparamset_wep(struct mwifiex_private *priv,
+ struct mwifiex_ie_type_key_param_set *key_param_set,
+ u16 *key_param_len)
+{
+ int cur_key_param_len;
+ u8 i;
+
+ /* Multi-key_param_set TLV is supported */
+ for (i = 0; i < NUM_WEP_KEYS; i++) {
+ if ((priv->wep_key[i].key_length == WLAN_KEY_LEN_WEP40) ||
+ (priv->wep_key[i].key_length == WLAN_KEY_LEN_WEP104)) {
+ key_param_set->type =
+ cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
+/* Key_param_set WEP fixed length */
+#define KEYPARAMSET_WEP_FIXED_LEN 8
+ key_param_set->length = cpu_to_le16((u16)
+ (priv->wep_key[i].
+ key_length +
+ KEYPARAMSET_WEP_FIXED_LEN));
+ key_param_set->key_type_id =
+ cpu_to_le16(KEY_TYPE_ID_WEP);
+ key_param_set->key_info =
+ cpu_to_le16(KEY_ENABLED | KEY_UNICAST |
+ KEY_MCAST);
+ key_param_set->key_len =
+ cpu_to_le16(priv->wep_key[i].key_length);
+ /* Set WEP key index */
+ key_param_set->key[0] = i;
+ /* Set default Tx key flag */
+ if (i ==
+ (priv->
+ wep_key_curr_index & HostCmd_WEP_KEY_INDEX_MASK))
+ key_param_set->key[1] = 1;
+ else
+ key_param_set->key[1] = 0;
+ memmove(&key_param_set->key[2],
+ priv->wep_key[i].key_material,
+ priv->wep_key[i].key_length);
+
+ cur_key_param_len = priv->wep_key[i].key_length +
+ KEYPARAMSET_WEP_FIXED_LEN +
+ sizeof(struct mwifiex_ie_types_header);
+ *key_param_len += (u16) cur_key_param_len;
+ key_param_set =
+ (struct mwifiex_ie_type_key_param_set *)
+ ((u8 *)key_param_set +
+ cur_key_param_len);
+ } else if (!priv->wep_key[i].key_length) {
+ continue;
+ } else {
+ dev_err(priv->adapter->dev,
+ "key%d Length = %d is incorrect\n",
+ (i + 1), priv->wep_key[i].key_length);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get/reset network key(s).
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting WEP keys, WAPI keys or WPA keys along with required
+ * encryption (TKIP, AES) (as required)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action,
+ u32 cmd_oid, void *data_buf)
+{
+ struct host_cmd_ds_802_11_key_material *key_material =
+ &cmd->params.key_material;
+ struct mwifiex_ds_encrypt_key *enc_key =
+ (struct mwifiex_ds_encrypt_key *) data_buf;
+ u16 key_param_len = 0;
+ int ret = 0;
+ const u8 bc_mac[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_KEY_MATERIAL);
+ key_material->action = cpu_to_le16(cmd_action);
+
+ if (cmd_action == HostCmd_ACT_GEN_GET) {
+ cmd->size =
+ cpu_to_le16(sizeof(key_material->action) + S_DS_GEN);
+ return ret;
+ }
+
+ if (!enc_key) {
+ memset(&key_material->key_param_set, 0,
+ (NUM_WEP_KEYS *
+ sizeof(struct mwifiex_ie_type_key_param_set)));
+ ret = mwifiex_set_keyparamset_wep(priv,
+ &key_material->key_param_set,
+ &key_param_len);
+ cmd->size = cpu_to_le16(key_param_len +
+ sizeof(key_material->action) + S_DS_GEN);
+ return ret;
+ } else
+ memset(&key_material->key_param_set, 0,
+ sizeof(struct mwifiex_ie_type_key_param_set));
+ if (enc_key->is_wapi_key) {
+ dev_dbg(priv->adapter->dev, "info: Set WAPI Key\n");
+ key_material->key_param_set.key_type_id =
+ cpu_to_le16(KEY_TYPE_ID_WAPI);
+ if (cmd_oid == KEY_INFO_ENABLED)
+ key_material->key_param_set.key_info =
+ cpu_to_le16(KEY_ENABLED);
+ else
+ key_material->key_param_set.key_info =
+ cpu_to_le16(!KEY_ENABLED);
+
+ key_material->key_param_set.key[0] = enc_key->key_index;
+ if (!priv->sec_info.wapi_key_on)
+ key_material->key_param_set.key[1] = 1;
+ else
+ /* set 0 when re-key */
+ key_material->key_param_set.key[1] = 0;
+
+ if (0 != memcmp(enc_key->mac_addr, bc_mac, sizeof(bc_mac))) {
+ /* WAPI pairwise key: unicast */
+ key_material->key_param_set.key_info |=
+ cpu_to_le16(KEY_UNICAST);
+ } else { /* WAPI group key: multicast */
+ key_material->key_param_set.key_info |=
+ cpu_to_le16(KEY_MCAST);
+ priv->sec_info.wapi_key_on = true;
+ }
+
+ key_material->key_param_set.type =
+ cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
+ key_material->key_param_set.key_len =
+ cpu_to_le16(WAPI_KEY_LEN);
+ memcpy(&key_material->key_param_set.key[2],
+ enc_key->key_material, enc_key->key_len);
+ memcpy(&key_material->key_param_set.key[2 + enc_key->key_len],
+ enc_key->wapi_rxpn, WAPI_RXPN_LEN);
+ key_material->key_param_set.length =
+ cpu_to_le16(WAPI_KEY_LEN + KEYPARAMSET_FIXED_LEN);
+
+ key_param_len = (WAPI_KEY_LEN + KEYPARAMSET_FIXED_LEN) +
+ sizeof(struct mwifiex_ie_types_header);
+ cmd->size = cpu_to_le16(key_param_len +
+ sizeof(key_material->action) + S_DS_GEN);
+ return ret;
+ }
+ if (enc_key->key_len == WLAN_KEY_LEN_CCMP) {
+ dev_dbg(priv->adapter->dev, "cmd: WPA_AES\n");
+ key_material->key_param_set.key_type_id =
+ cpu_to_le16(KEY_TYPE_ID_AES);
+ if (cmd_oid == KEY_INFO_ENABLED)
+ key_material->key_param_set.key_info =
+ cpu_to_le16(KEY_ENABLED);
+ else
+ key_material->key_param_set.key_info =
+ cpu_to_le16(!KEY_ENABLED);
+
+ if (enc_key->key_index & MWIFIEX_KEY_INDEX_UNICAST)
+ /* AES pairwise key: unicast */
+ key_material->key_param_set.key_info |=
+ cpu_to_le16(KEY_UNICAST);
+ else /* AES group key: multicast */
+ key_material->key_param_set.key_info |=
+ cpu_to_le16(KEY_MCAST);
+ } else if (enc_key->key_len == WLAN_KEY_LEN_TKIP) {
+ dev_dbg(priv->adapter->dev, "cmd: WPA_TKIP\n");
+ key_material->key_param_set.key_type_id =
+ cpu_to_le16(KEY_TYPE_ID_TKIP);
+ key_material->key_param_set.key_info =
+ cpu_to_le16(KEY_ENABLED);
+
+ if (enc_key->key_index & MWIFIEX_KEY_INDEX_UNICAST)
+ /* TKIP pairwise key: unicast */
+ key_material->key_param_set.key_info |=
+ cpu_to_le16(KEY_UNICAST);
+ else /* TKIP group key: multicast */
+ key_material->key_param_set.key_info |=
+ cpu_to_le16(KEY_MCAST);
+ }
+
+ if (key_material->key_param_set.key_type_id) {
+ key_material->key_param_set.type =
+ cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
+ key_material->key_param_set.key_len =
+ cpu_to_le16((u16) enc_key->key_len);
+ memcpy(key_material->key_param_set.key, enc_key->key_material,
+ enc_key->key_len);
+ key_material->key_param_set.length =
+ cpu_to_le16((u16) enc_key->key_len +
+ KEYPARAMSET_FIXED_LEN);
+
+ key_param_len = (u16) (enc_key->key_len + KEYPARAMSET_FIXED_LEN)
+ + sizeof(struct mwifiex_ie_types_header);
+
+ cmd->size = cpu_to_le16(key_param_len +
+ sizeof(key_material->action) + S_DS_GEN);
+ }
+
+ return ret;
+}
+
+/*
+ * This function prepares command to set/get 11d domain information.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting domain information fields (for SET only)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11d_domain_info(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11d_domain_info *domain_info =
+ &cmd->params.domain_info;
+ struct mwifiex_ietypes_domain_param_set *domain =
+ &domain_info->domain;
+ u8 no_of_triplet = adapter->domain_reg.no_of_triplet;
+
+ dev_dbg(adapter->dev, "info: 11D: no_of_triplet=0x%x\n", no_of_triplet);
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11D_DOMAIN_INFO);
+ domain_info->action = cpu_to_le16(cmd_action);
+ if (cmd_action == HostCmd_ACT_GEN_GET) {
+ cmd->size = cpu_to_le16(sizeof(domain_info->action) + S_DS_GEN);
+ return 0;
+ }
+
+ /* Set domain info fields */
+ domain->header.type = cpu_to_le16(WLAN_EID_COUNTRY);
+ memcpy(domain->country_code, adapter->domain_reg.country_code,
+ sizeof(domain->country_code));
+
+ domain->header.len = cpu_to_le16((no_of_triplet *
+ sizeof(struct ieee80211_country_ie_triplet)) +
+ sizeof(domain->country_code));
+
+ if (no_of_triplet) {
+ memcpy(domain->triplet, adapter->domain_reg.triplet,
+ no_of_triplet *
+ sizeof(struct ieee80211_country_ie_triplet));
+
+ cmd->size = cpu_to_le16(sizeof(domain_info->action) +
+ le16_to_cpu(domain->header.len) +
+ sizeof(struct mwifiex_ie_types_header)
+ + S_DS_GEN);
+ } else {
+ cmd->size = cpu_to_le16(sizeof(domain_info->action) + S_DS_GEN);
+ }
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get RF channel.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting RF type and current RF channel (for SET only)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_802_11_rf_channel(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct host_cmd_ds_802_11_rf_channel *rf_chan =
+ &cmd->params.rf_channel;
+ uint16_t rf_type = le16_to_cpu(rf_chan->rf_type);
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_RF_CHANNEL);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_rf_channel)
+ + S_DS_GEN);
+
+ if (cmd_action == HostCmd_ACT_GEN_SET) {
+ if ((priv->adapter->adhoc_start_band & BAND_A)
+ || (priv->adapter->adhoc_start_band & BAND_AN))
+ rf_chan->rf_type =
+ cpu_to_le16(HostCmd_SCAN_RADIO_TYPE_A);
+
+ rf_type = le16_to_cpu(rf_chan->rf_type);
+ SET_SECONDARYCHAN(rf_type, priv->adapter->chan_offset);
+ rf_chan->current_channel = cpu_to_le16(*((u16 *) data_buf));
+ }
+ rf_chan->action = cpu_to_le16(cmd_action);
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get IBSS coalescing status.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting status to enable or disable (for SET only)
+ * - Ensuring correct endian-ness
+ */
+static int mwifiex_cmd_ibss_coalescing_status(struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct host_cmd_ds_802_11_ibss_status *ibss_coal =
+ &(cmd->params.ibss_coalescing);
+ u16 enable = 0;
+
+ cmd->command = cpu_to_le16(HostCmd_CMD_802_11_IBSS_COALESCING_STATUS);
+ cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_ibss_status) +
+ S_DS_GEN);
+ cmd->result = 0;
+ ibss_coal->action = cpu_to_le16(cmd_action);
+
+ switch (cmd_action) {
+ case HostCmd_ACT_GEN_SET:
+ if (data_buf != NULL)
+ enable = *(u16 *) data_buf;
+ ibss_coal->enable = cpu_to_le16(enable);
+ break;
+
+ /* In other case.. Nothing to do */
+ case HostCmd_ACT_GEN_GET:
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * This function prepares command to set/get register value.
+ *
+ * Preparation includes -
+ * - Setting command ID, action and proper size
+ * - Setting register offset (for both GET and SET) and
+ * register value (for SET only)
+ * - Ensuring correct endian-ness
+ *
+ * The following type of registers can be accessed with this function -
+ * - MAC register
+ * - BBP register
+ * - RF register
+ * - PMIC register
+ * - CAU register
+ * - EEPROM
+ */
+static int mwifiex_cmd_reg_access(struct host_cmd_ds_command *cmd,
+ u16 cmd_action, void *data_buf)
+{
+ struct mwifiex_ds_reg_rw *reg_rw;
+
+ reg_rw = (struct mwifiex_ds_reg_rw *) data_buf;
+ switch (le16_to_cpu(cmd->command)) {
+ case HostCmd_CMD_MAC_REG_ACCESS:
+ {
+ struct host_cmd_ds_mac_reg_access *mac_reg;
+
+ cmd->size = cpu_to_le16(sizeof(*mac_reg) + S_DS_GEN);
+ mac_reg = (struct host_cmd_ds_mac_reg_access *) &cmd->
+ params.mac_reg;
+ mac_reg->action = cpu_to_le16(cmd_action);
+ mac_reg->offset =
+ cpu_to_le16((u16) le32_to_cpu(reg_rw->offset));
+ mac_reg->value = reg_rw->value;
+ break;
+ }
+ case HostCmd_CMD_BBP_REG_ACCESS:
+ {
+ struct host_cmd_ds_bbp_reg_access *bbp_reg;
+
+ cmd->size = cpu_to_le16(sizeof(*bbp_reg) + S_DS_GEN);
+ bbp_reg = (struct host_cmd_ds_bbp_reg_access *) &cmd->
+ params.bbp_reg;
+ bbp_reg->action = cpu_to_le16(cmd_action);
+ bbp_reg->offset =
+ cpu_to_le16((u16) le32_to_cpu(reg_rw->offset));
+ bbp_reg->value = (u8) le32_to_cpu(reg_rw->value);
+ break;
+ }
+ case HostCmd_CMD_RF_REG_ACCESS:
+ {
+ struct host_cmd_ds_rf_reg_access *rf_reg;
+
+ cmd->size = cpu_to_le16(sizeof(*rf_reg) + S_DS_GEN);
+ rf_reg = (struct host_cmd_ds_rf_reg_access *) &cmd->
+ params.rf_reg;
+ rf_reg->action = cpu_to_le16(cmd_action);
+ rf_reg->offset =
+ cpu_to_le16((u16) le32_to_cpu(reg_rw->offset));
+ rf_reg->value = (u8) le32_to_cpu(reg_rw->value);
+ break;
+ }
+ case HostCmd_CMD_PMIC_REG_ACCESS:
+ {
+ struct host_cmd_ds_pmic_reg_access *pmic_reg;
+
+ cmd->size = cpu_to_le16(sizeof(*pmic_reg) + S_DS_GEN);
+ pmic_reg = (struct host_cmd_ds_pmic_reg_access *) &cmd->
+ params.pmic_reg;
+ pmic_reg->action = cpu_to_le16(cmd_action);
+ pmic_reg->offset =
+ cpu_to_le16((u16) le32_to_cpu(reg_rw->offset));
+ pmic_reg->value = (u8) le32_to_cpu(reg_rw->value);
+ break;
+ }
+ case HostCmd_CMD_CAU_REG_ACCESS:
+ {
+ struct host_cmd_ds_rf_reg_access *cau_reg;
+
+ cmd->size = cpu_to_le16(sizeof(*cau_reg) + S_DS_GEN);
+ cau_reg = (struct host_cmd_ds_rf_reg_access *) &cmd->
+ params.rf_reg;
+ cau_reg->action = cpu_to_le16(cmd_action);
+ cau_reg->offset =
+ cpu_to_le16((u16) le32_to_cpu(reg_rw->offset));
+ cau_reg->value = (u8) le32_to_cpu(reg_rw->value);
+ break;
+ }
+ case HostCmd_CMD_802_11_EEPROM_ACCESS:
+ {
+ struct mwifiex_ds_read_eeprom *rd_eeprom =
+ (struct mwifiex_ds_read_eeprom *) data_buf;
+ struct host_cmd_ds_802_11_eeprom_access *cmd_eeprom =
+ (struct host_cmd_ds_802_11_eeprom_access *)
+ &cmd->params.eeprom;
+
+ cmd->size = cpu_to_le16(sizeof(*cmd_eeprom) + S_DS_GEN);
+ cmd_eeprom->action = cpu_to_le16(cmd_action);
+ cmd_eeprom->offset = rd_eeprom->offset;
+ cmd_eeprom->byte_count = rd_eeprom->byte_count;
+ cmd_eeprom->value = 0;
+ break;
+ }
+ default:
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * This function prepares the commands before sending them to the firmware.
+ *
+ * This is a generic function which calls specific command preparation
+ * routines based upon the command number.
+ */
+int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid,
+ void *data_buf, void *cmd_buf)
+{
+ struct host_cmd_ds_command *cmd_ptr =
+ (struct host_cmd_ds_command *) cmd_buf;
+ int ret = 0;
+
+ /* Prepare command */
+ switch (cmd_no) {
+ case HostCmd_CMD_GET_HW_SPEC:
+ ret = mwifiex_cmd_get_hw_spec(priv, cmd_ptr);
+ break;
+ case HostCmd_CMD_MAC_CONTROL:
+ ret = mwifiex_cmd_mac_control(priv, cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_802_11_MAC_ADDRESS:
+ ret = mwifiex_cmd_802_11_mac_address(priv, cmd_ptr,
+ cmd_action);
+ break;
+ case HostCmd_CMD_MAC_MULTICAST_ADR:
+ ret = mwifiex_cmd_mac_multicast_adr(cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_TX_RATE_CFG:
+ ret = mwifiex_cmd_tx_rate_cfg(priv, cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_TXPWR_CFG:
+ ret = mwifiex_cmd_tx_power_cfg(cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_802_11_PS_MODE_ENH:
+ ret = mwifiex_cmd_enh_power_mode(priv, cmd_ptr, cmd_action,
+ (uint16_t)cmd_oid, data_buf);
+ break;
+ case HostCmd_CMD_802_11_HS_CFG_ENH:
+ ret = mwifiex_cmd_802_11_hs_cfg(priv, cmd_ptr, cmd_action,
+ (struct mwifiex_hs_config_param *) data_buf);
+ break;
+ case HostCmd_CMD_802_11_SCAN:
+ ret = mwifiex_cmd_802_11_scan(cmd_ptr, data_buf);
+ break;
+ case HostCmd_CMD_802_11_BG_SCAN_QUERY:
+ ret = mwifiex_cmd_802_11_bg_scan_query(cmd_ptr);
+ break;
+ case HostCmd_CMD_802_11_ASSOCIATE:
+ ret = mwifiex_cmd_802_11_associate(priv, cmd_ptr, data_buf);
+ break;
+ case HostCmd_CMD_802_11_DEAUTHENTICATE:
+ ret = mwifiex_cmd_802_11_deauthenticate(priv, cmd_ptr,
+ data_buf);
+ break;
+ case HostCmd_CMD_802_11_AD_HOC_START:
+ ret = mwifiex_cmd_802_11_ad_hoc_start(priv, cmd_ptr,
+ data_buf);
+ break;
+ case HostCmd_CMD_802_11_GET_LOG:
+ ret = mwifiex_cmd_802_11_get_log(cmd_ptr);
+ break;
+ case HostCmd_CMD_802_11_AD_HOC_JOIN:
+ ret = mwifiex_cmd_802_11_ad_hoc_join(priv, cmd_ptr,
+ data_buf);
+ break;
+ case HostCmd_CMD_802_11_AD_HOC_STOP:
+ ret = mwifiex_cmd_802_11_ad_hoc_stop(cmd_ptr);
+ break;
+ case HostCmd_CMD_RSSI_INFO:
+ ret = mwifiex_cmd_802_11_rssi_info(priv, cmd_ptr, cmd_action);
+ break;
+ case HostCmd_CMD_802_11_SNMP_MIB:
+ ret = mwifiex_cmd_802_11_snmp_mib(priv, cmd_ptr, cmd_action,
+ cmd_oid, data_buf);
+ break;
+ case HostCmd_CMD_802_11_TX_RATE_QUERY:
+ cmd_ptr->command =
+ cpu_to_le16(HostCmd_CMD_802_11_TX_RATE_QUERY);
+ cmd_ptr->size =
+ cpu_to_le16(sizeof(struct host_cmd_ds_tx_rate_query) +
+ S_DS_GEN);
+ priv->tx_rate = 0;
+ ret = 0;
+ break;
+ case HostCmd_CMD_VERSION_EXT:
+ cmd_ptr->command = cpu_to_le16(cmd_no);
+ cmd_ptr->params.verext.version_str_sel =
+ (u8) (*((u32 *) data_buf));
+ memcpy(&cmd_ptr->params, data_buf,
+ sizeof(struct host_cmd_ds_version_ext));
+ cmd_ptr->size =
+ cpu_to_le16(sizeof(struct host_cmd_ds_version_ext) +
+ S_DS_GEN);
+ ret = 0;
+ break;
+ case HostCmd_CMD_802_11_RF_CHANNEL:
+ ret = mwifiex_cmd_802_11_rf_channel(priv, cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_FUNC_INIT:
+ if (priv->adapter->hw_status == MWIFIEX_HW_STATUS_RESET)
+ priv->adapter->hw_status = MWIFIEX_HW_STATUS_READY;
+ cmd_ptr->command = cpu_to_le16(cmd_no);
+ cmd_ptr->size = cpu_to_le16(S_DS_GEN);
+ break;
+ case HostCmd_CMD_FUNC_SHUTDOWN:
+ priv->adapter->hw_status = MWIFIEX_HW_STATUS_RESET;
+ cmd_ptr->command = cpu_to_le16(cmd_no);
+ cmd_ptr->size = cpu_to_le16(S_DS_GEN);
+ break;
+ case HostCmd_CMD_11N_ADDBA_REQ:
+ ret = mwifiex_cmd_11n_addba_req(cmd_ptr, data_buf);
+ break;
+ case HostCmd_CMD_11N_DELBA:
+ ret = mwifiex_cmd_11n_delba(cmd_ptr, data_buf);
+ break;
+ case HostCmd_CMD_11N_ADDBA_RSP:
+ ret = mwifiex_cmd_11n_addba_rsp_gen(priv, cmd_ptr, data_buf);
+ break;
+ case HostCmd_CMD_802_11_KEY_MATERIAL:
+ ret = mwifiex_cmd_802_11_key_material(priv, cmd_ptr,
+ cmd_action, cmd_oid,
+ data_buf);
+ break;
+ case HostCmd_CMD_802_11D_DOMAIN_INFO:
+ ret = mwifiex_cmd_802_11d_domain_info(priv, cmd_ptr,
+ cmd_action);
+ break;
+ case HostCmd_CMD_RECONFIGURE_TX_BUFF:
+ ret = mwifiex_cmd_recfg_tx_buf(priv, cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_AMSDU_AGGR_CTRL:
+ ret = mwifiex_cmd_amsdu_aggr_ctrl(cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_11N_CFG:
+ ret = mwifiex_cmd_11n_cfg(cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_WMM_GET_STATUS:
+ dev_dbg(priv->adapter->dev,
+ "cmd: WMM: WMM_GET_STATUS cmd sent\n");
+ cmd_ptr->command = cpu_to_le16(HostCmd_CMD_WMM_GET_STATUS);
+ cmd_ptr->size =
+ cpu_to_le16(sizeof(struct host_cmd_ds_wmm_get_status) +
+ S_DS_GEN);
+ ret = 0;
+ break;
+ case HostCmd_CMD_802_11_IBSS_COALESCING_STATUS:
+ ret = mwifiex_cmd_ibss_coalescing_status(cmd_ptr, cmd_action,
+ data_buf);
+ break;
+ case HostCmd_CMD_MAC_REG_ACCESS:
+ case HostCmd_CMD_BBP_REG_ACCESS:
+ case HostCmd_CMD_RF_REG_ACCESS:
+ case HostCmd_CMD_PMIC_REG_ACCESS:
+ case HostCmd_CMD_CAU_REG_ACCESS:
+ case HostCmd_CMD_802_11_EEPROM_ACCESS:
+ ret = mwifiex_cmd_reg_access(cmd_ptr, cmd_action, data_buf);
+ break;
+ case HostCmd_CMD_SET_BSS_MODE:
+ cmd_ptr->command = cpu_to_le16(cmd_no);
+ if (priv->bss_mode == NL80211_IFTYPE_ADHOC)
+ cmd_ptr->params.bss_mode.con_type =
+ CONNECTION_TYPE_ADHOC;
+ else if (priv->bss_mode == NL80211_IFTYPE_STATION)
+ cmd_ptr->params.bss_mode.con_type =
+ CONNECTION_TYPE_INFRA;
+ cmd_ptr->size = cpu_to_le16(sizeof(struct
+ host_cmd_ds_set_bss_mode) + S_DS_GEN);
+ ret = 0;
+ break;
+ default:
+ dev_err(priv->adapter->dev,
+ "PREP_CMD: unknown cmd- %#x\n", cmd_no);
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * This function issues commands to initialize firmware.
+ *
+ * This is called after firmware download to bring the card to
+ * working state.
+ *
+ * The following commands are issued sequentially -
+ * - Function init (for first interface only)
+ * - Read MAC address (for first interface only)
+ * - Reconfigure Tx buffer size (for first interface only)
+ * - Enable auto deep sleep (for first interface only)
+ * - Get Tx rate
+ * - Get Tx power
+ * - Set IBSS coalescing status
+ * - Set AMSDU aggregation control
+ * - Set 11d control
+ * - Set MAC control (this must be the last command to initialize firmware)
+ */
+int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
+{
+ int ret;
+ u16 enable = true;
+ struct mwifiex_ds_11n_amsdu_aggr_ctrl amsdu_aggr_ctrl;
+ struct mwifiex_ds_auto_ds auto_ds;
+ enum state_11d_t state_11d;
+
+ if (first_sta) {
+
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_FUNC_INIT,
+ HostCmd_ACT_GEN_SET, 0, NULL);
+ if (ret)
+ return -1;
+ /* Read MAC address from HW */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_GET_HW_SPEC,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+ if (ret)
+ return -1;
+
+ /* Reconfigure tx buf size */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_RECONFIGURE_TX_BUFF,
+ HostCmd_ACT_GEN_SET, 0,
+ &priv->adapter->tx_buf_size);
+ if (ret)
+ return -1;
+
+ /* Enable IEEE PS by default */
+ priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_PS_MODE_ENH,
+ EN_AUTO_PS, BITMAP_STA_PS, NULL);
+ if (ret)
+ return -1;
+ }
+
+ /* get tx rate */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_TX_RATE_CFG,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+ if (ret)
+ return -1;
+ priv->data_rate = 0;
+
+ /* get tx power */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_TXPWR_CFG,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+ if (ret)
+ return -1;
+
+ /* set ibss coalescing_status */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
+ HostCmd_ACT_GEN_SET, 0, &enable);
+ if (ret)
+ return -1;
+
+ memset(&amsdu_aggr_ctrl, 0, sizeof(amsdu_aggr_ctrl));
+ amsdu_aggr_ctrl.enable = true;
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_AMSDU_AGGR_CTRL,
+ HostCmd_ACT_GEN_SET, 0,
+ (void *) &amsdu_aggr_ctrl);
+ if (ret)
+ return -1;
+ /* MAC Control must be the last command in init_fw */
+ /* set MAC Control */
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
+ HostCmd_ACT_GEN_SET, 0,
+ &priv->curr_pkt_filter);
+ if (ret)
+ return -1;
+
+ if (first_sta) {
+ /* Enable auto deep sleep */
+ auto_ds.auto_ds = DEEP_SLEEP_ON;
+ auto_ds.idle_time = DEEP_SLEEP_IDLE_TIME;
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_PS_MODE_ENH,
+ EN_AUTO_PS, BITMAP_AUTO_DS,
+ &auto_ds);
+ if (ret)
+ return -1;
+ }
+
+ /* Send cmd to FW to enable/disable 11D function */
+ state_11d = ENABLE_11D;
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11_SNMP_MIB,
+ HostCmd_ACT_GEN_SET, DOT11D_I, &state_11d);
+ if (ret)
+ dev_err(priv->adapter->dev, "11D: failed to enable 11D\n");
+
+ /* set last_init_cmd */
+ priv->adapter->last_init_cmd = HostCmd_CMD_802_11_SNMP_MIB;
+ ret = -EINPROGRESS;
+
+ return ret;
+}
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
new file mode 100644
index 0000000..d08f764
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -0,0 +1,972 @@
+/*
+ * Marvell Wireless LAN device driver: station command response handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+
+/*
+ * This function handles the command response error case.
+ *
+ * For scan response error, the function cancels all the pending
+ * scan commands and generates an event to inform the applications
+ * of the scan completion.
+ *
+ * For Power Save command failure, we do not retry enter PS
+ * command in case of Ad-hoc mode.
+ *
+ * For all other response errors, the current command buffer is freed
+ * and returned to the free command queue.
+ */
+static void
+mwifiex_process_cmdresp_error(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct cmd_ctrl_node *cmd_node = NULL, *tmp_node;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_802_11_ps_mode_enh *pm;
+ unsigned long flags;
+
+ dev_err(adapter->dev, "CMD_RESP: cmd %#x error, result=%#x\n",
+ resp->command, resp->result);
+
+ if (adapter->curr_cmd->wait_q_enabled)
+ adapter->cmd_wait_q.status = -1;
+
+ switch (le16_to_cpu(resp->command)) {
+ case HostCmd_CMD_802_11_PS_MODE_ENH:
+ pm = &resp->params.psmode_enh;
+ dev_err(adapter->dev, "PS_MODE_ENH cmd failed: "
+ "result=0x%x action=0x%X\n",
+ resp->result, le16_to_cpu(pm->action));
+ /* We do not re-try enter-ps command in ad-hoc mode. */
+ if (le16_to_cpu(pm->action) == EN_AUTO_PS &&
+ (le16_to_cpu(pm->params.ps_bitmap) & BITMAP_STA_PS) &&
+ priv->bss_mode == NL80211_IFTYPE_ADHOC)
+ adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
+
+ break;
+ case HostCmd_CMD_802_11_SCAN:
+ /* Cancel all pending scan command */
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ list_for_each_entry_safe(cmd_node, tmp_node,
+ &adapter->scan_pending_q, list) {
+ list_del(&cmd_node->list);
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+ flags);
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+ }
+ spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->scan_processing = false;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+ if (priv->report_scan_result)
+ priv->report_scan_result = false;
+ if (priv->scan_pending_on_block) {
+ priv->scan_pending_on_block = false;
+ up(&priv->async_sem);
+ }
+ break;
+
+ case HostCmd_CMD_MAC_CONTROL:
+ break;
+
+ default:
+ break;
+ }
+ /* Handling errors here */
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+
+ spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+ adapter->curr_cmd = NULL;
+ spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+}
+
+/*
+ * This function handles the command response of get RSSI info.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving the following parameters in driver -
+ * - Last data and beacon RSSI value
+ * - Average data and beacon RSSI value
+ * - Last data and beacon NF value
+ * - Average data and beacon NF value
+ *
+ * The parameters are send to the application as well, along with
+ * calculated SNR values.
+ */
+static int mwifiex_ret_802_11_rssi_info(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_rssi_info_rsp *rssi_info_rsp =
+ &resp->params.rssi_info_rsp;
+ struct mwifiex_ds_get_signal *signal;
+
+ priv->data_rssi_last = le16_to_cpu(rssi_info_rsp->data_rssi_last);
+ priv->data_nf_last = le16_to_cpu(rssi_info_rsp->data_nf_last);
+
+ priv->data_rssi_avg = le16_to_cpu(rssi_info_rsp->data_rssi_avg);
+ priv->data_nf_avg = le16_to_cpu(rssi_info_rsp->data_nf_avg);
+
+ priv->bcn_rssi_last = le16_to_cpu(rssi_info_rsp->bcn_rssi_last);
+ priv->bcn_nf_last = le16_to_cpu(rssi_info_rsp->bcn_nf_last);
+
+ priv->bcn_rssi_avg = le16_to_cpu(rssi_info_rsp->bcn_rssi_avg);
+ priv->bcn_nf_avg = le16_to_cpu(rssi_info_rsp->bcn_nf_avg);
+
+ /* Need to indicate IOCTL complete */
+ if (data_buf) {
+ signal = (struct mwifiex_ds_get_signal *) data_buf;
+ memset(signal, 0, sizeof(struct mwifiex_ds_get_signal));
+
+ signal->selector = ALL_RSSI_INFO_MASK;
+
+ /* RSSI */
+ signal->bcn_rssi_last = priv->bcn_rssi_last;
+ signal->bcn_rssi_avg = priv->bcn_rssi_avg;
+ signal->data_rssi_last = priv->data_rssi_last;
+ signal->data_rssi_avg = priv->data_rssi_avg;
+
+ /* SNR */
+ signal->bcn_snr_last =
+ CAL_SNR(priv->bcn_rssi_last, priv->bcn_nf_last);
+ signal->bcn_snr_avg =
+ CAL_SNR(priv->bcn_rssi_avg, priv->bcn_nf_avg);
+ signal->data_snr_last =
+ CAL_SNR(priv->data_rssi_last, priv->data_nf_last);
+ signal->data_snr_avg =
+ CAL_SNR(priv->data_rssi_avg, priv->data_nf_avg);
+
+ /* NF */
+ signal->bcn_nf_last = priv->bcn_nf_last;
+ signal->bcn_nf_avg = priv->bcn_nf_avg;
+ signal->data_nf_last = priv->data_nf_last;
+ signal->data_nf_avg = priv->data_nf_avg;
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of set/get SNMP
+ * MIB parameters.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving the parameter in driver.
+ *
+ * The following parameters are supported -
+ * - Fragmentation threshold
+ * - RTS threshold
+ * - Short retry limit
+ */
+static int mwifiex_ret_802_11_snmp_mib(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_snmp_mib *smib = &resp->params.smib;
+ u16 oid = le16_to_cpu(smib->oid);
+ u16 query_type = le16_to_cpu(smib->query_type);
+ u32 ul_temp;
+
+ dev_dbg(priv->adapter->dev, "info: SNMP_RESP: oid value = %#x,"
+ " query_type = %#x, buf size = %#x\n",
+ oid, query_type, le16_to_cpu(smib->buf_size));
+ if (query_type == HostCmd_ACT_GEN_GET) {
+ ul_temp = le16_to_cpu(*((__le16 *) (smib->value)));
+ if (data_buf)
+ *(u32 *)data_buf = ul_temp;
+ switch (oid) {
+ case FRAG_THRESH_I:
+ dev_dbg(priv->adapter->dev,
+ "info: SNMP_RESP: FragThsd =%u\n", ul_temp);
+ break;
+ case RTS_THRESH_I:
+ dev_dbg(priv->adapter->dev,
+ "info: SNMP_RESP: RTSThsd =%u\n", ul_temp);
+ break;
+ case SHORT_RETRY_LIM_I:
+ dev_dbg(priv->adapter->dev,
+ "info: SNMP_RESP: TxRetryCount=%u\n", ul_temp);
+ break;
+ default:
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of get log request
+ *
+ * Handling includes changing the header fields into CPU format
+ * and sending the received parameters to application.
+ */
+static int mwifiex_ret_get_log(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_get_log *get_log =
+ (struct host_cmd_ds_802_11_get_log *) &resp->params.get_log;
+ struct mwifiex_ds_get_stats *stats;
+
+ if (data_buf) {
+ stats = (struct mwifiex_ds_get_stats *) data_buf;
+ stats->mcast_tx_frame = le32_to_cpu(get_log->mcast_tx_frame);
+ stats->failed = le32_to_cpu(get_log->failed);
+ stats->retry = le32_to_cpu(get_log->retry);
+ stats->multi_retry = le32_to_cpu(get_log->multi_retry);
+ stats->frame_dup = le32_to_cpu(get_log->frame_dup);
+ stats->rts_success = le32_to_cpu(get_log->rts_success);
+ stats->rts_failure = le32_to_cpu(get_log->rts_failure);
+ stats->ack_failure = le32_to_cpu(get_log->ack_failure);
+ stats->rx_frag = le32_to_cpu(get_log->rx_frag);
+ stats->mcast_rx_frame = le32_to_cpu(get_log->mcast_rx_frame);
+ stats->fcs_error = le32_to_cpu(get_log->fcs_error);
+ stats->tx_frame = le32_to_cpu(get_log->tx_frame);
+ stats->wep_icv_error[0] =
+ le32_to_cpu(get_log->wep_icv_err_cnt[0]);
+ stats->wep_icv_error[1] =
+ le32_to_cpu(get_log->wep_icv_err_cnt[1]);
+ stats->wep_icv_error[2] =
+ le32_to_cpu(get_log->wep_icv_err_cnt[2]);
+ stats->wep_icv_error[3] =
+ le32_to_cpu(get_log->wep_icv_err_cnt[3]);
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of set/get Tx rate
+ * configurations.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving the following parameters in driver -
+ * - DSSS rate bitmap
+ * - OFDM rate bitmap
+ * - HT MCS rate bitmaps
+ *
+ * Based on the new rate bitmaps, the function re-evaluates if
+ * auto data rate has been activated. If not, it sends another
+ * query to the firmware to get the current Tx data rate and updates
+ * the driver value.
+ */
+static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct mwifiex_rate_cfg *ds_rate;
+ struct host_cmd_ds_tx_rate_cfg *rate_cfg = &resp->params.tx_rate_cfg;
+ struct mwifiex_rate_scope *rate_scope;
+ struct mwifiex_ie_types_header *head;
+ u16 tlv, tlv_buf_len;
+ u8 *tlv_buf;
+ u32 i;
+ int ret = 0;
+
+ tlv_buf = (u8 *) ((u8 *) rate_cfg) +
+ sizeof(struct host_cmd_ds_tx_rate_cfg);
+ tlv_buf_len = *(u16 *) (tlv_buf + sizeof(u16));
+
+ while (tlv_buf && tlv_buf_len > 0) {
+ tlv = (*tlv_buf);
+ tlv = tlv | (*(tlv_buf + 1) << 8);
+
+ switch (tlv) {
+ case TLV_TYPE_RATE_SCOPE:
+ rate_scope = (struct mwifiex_rate_scope *) tlv_buf;
+ priv->bitmap_rates[0] =
+ le16_to_cpu(rate_scope->hr_dsss_rate_bitmap);
+ priv->bitmap_rates[1] =
+ le16_to_cpu(rate_scope->ofdm_rate_bitmap);
+ for (i = 0;
+ i <
+ sizeof(rate_scope->ht_mcs_rate_bitmap) /
+ sizeof(u16); i++)
+ priv->bitmap_rates[2 + i] =
+ le16_to_cpu(rate_scope->
+ ht_mcs_rate_bitmap[i]);
+ break;
+ /* Add RATE_DROP tlv here */
+ }
+
+ head = (struct mwifiex_ie_types_header *) tlv_buf;
+ tlv_buf += le16_to_cpu(head->len) + sizeof(*head);
+ tlv_buf_len -= le16_to_cpu(head->len);
+ }
+
+ priv->is_data_rate_auto = mwifiex_is_rate_auto(priv);
+
+ if (priv->is_data_rate_auto)
+ priv->data_rate = 0;
+ else
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_TX_RATE_QUERY,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+
+ if (data_buf) {
+ ds_rate = (struct mwifiex_rate_cfg *) data_buf;
+ if (le16_to_cpu(rate_cfg->action) == HostCmd_ACT_GEN_GET) {
+ if (priv->is_data_rate_auto) {
+ ds_rate->is_rate_auto = 1;
+ } else {
+ ds_rate->rate = mwifiex_get_rate_index(priv->
+ bitmap_rates,
+ sizeof(priv->
+ bitmap_rates));
+ if (ds_rate->rate >=
+ MWIFIEX_RATE_BITMAP_OFDM0
+ && ds_rate->rate <=
+ MWIFIEX_RATE_BITMAP_OFDM7)
+ ds_rate->rate -=
+ (MWIFIEX_RATE_BITMAP_OFDM0 -
+ MWIFIEX_RATE_INDEX_OFDM0);
+ if (ds_rate->rate >=
+ MWIFIEX_RATE_BITMAP_MCS0
+ && ds_rate->rate <=
+ MWIFIEX_RATE_BITMAP_MCS127)
+ ds_rate->rate -=
+ (MWIFIEX_RATE_BITMAP_MCS0 -
+ MWIFIEX_RATE_INDEX_MCS0);
+ }
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * This function handles the command response of get Tx power level.
+ *
+ * Handling includes saving the maximum and minimum Tx power levels
+ * in driver, as well as sending the values to user.
+ */
+static int mwifiex_get_power_level(struct mwifiex_private *priv, void *data_buf)
+{
+ int length, max_power = -1, min_power = -1;
+ struct mwifiex_types_power_group *pg_tlv_hdr;
+ struct mwifiex_power_group *pg;
+
+ if (data_buf) {
+ pg_tlv_hdr =
+ (struct mwifiex_types_power_group *) ((u8 *) data_buf
+ + sizeof(struct host_cmd_ds_txpwr_cfg));
+ pg = (struct mwifiex_power_group *) ((u8 *) pg_tlv_hdr +
+ sizeof(struct mwifiex_types_power_group));
+ length = pg_tlv_hdr->length;
+ if (length > 0) {
+ max_power = pg->power_max;
+ min_power = pg->power_min;
+ length -= sizeof(struct mwifiex_power_group);
+ }
+ while (length) {
+ pg++;
+ if (max_power < pg->power_max)
+ max_power = pg->power_max;
+
+ if (min_power > pg->power_min)
+ min_power = pg->power_min;
+
+ length -= sizeof(struct mwifiex_power_group);
+ }
+ if (pg_tlv_hdr->length > 0) {
+ priv->min_tx_power_level = (u8) min_power;
+ priv->max_tx_power_level = (u8) max_power;
+ }
+ } else {
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of set/get Tx power
+ * configurations.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving the current Tx power level in driver.
+ */
+static int mwifiex_ret_tx_power_cfg(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_txpwr_cfg *txp_cfg = &resp->params.txp_cfg;
+ struct mwifiex_types_power_group *pg_tlv_hdr;
+ struct mwifiex_power_group *pg;
+ u16 action = le16_to_cpu(txp_cfg->action);
+
+ switch (action) {
+ case HostCmd_ACT_GEN_GET:
+ {
+ pg_tlv_hdr =
+ (struct mwifiex_types_power_group *) ((u8 *)
+ txp_cfg +
+ sizeof
+ (struct
+ host_cmd_ds_txpwr_cfg));
+ pg = (struct mwifiex_power_group *) ((u8 *)
+ pg_tlv_hdr +
+ sizeof(struct
+ mwifiex_types_power_group));
+ if (adapter->hw_status ==
+ MWIFIEX_HW_STATUS_INITIALIZING)
+ mwifiex_get_power_level(priv, txp_cfg);
+ priv->tx_power_level = (u16) pg->power_min;
+ break;
+ }
+ case HostCmd_ACT_GEN_SET:
+ if (le32_to_cpu(txp_cfg->mode)) {
+ pg_tlv_hdr =
+ (struct mwifiex_types_power_group *) ((u8 *)
+ txp_cfg +
+ sizeof
+ (struct
+ host_cmd_ds_txpwr_cfg));
+ pg = (struct mwifiex_power_group *) ((u8 *) pg_tlv_hdr
+ +
+ sizeof(struct
+ mwifiex_types_power_group));
+ if (pg->power_max == pg->power_min)
+ priv->tx_power_level = (u16) pg->power_min;
+ }
+ break;
+ default:
+ dev_err(adapter->dev, "CMD_RESP: unknown cmd action %d\n",
+ action);
+ return 0;
+ }
+ dev_dbg(adapter->dev,
+ "info: Current TxPower Level = %d, Max Power=%d, Min Power=%d\n",
+ priv->tx_power_level, priv->max_tx_power_level,
+ priv->min_tx_power_level);
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of set/get MAC address.
+ *
+ * Handling includes saving the MAC address in driver.
+ */
+static int mwifiex_ret_802_11_mac_address(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct host_cmd_ds_802_11_mac_address *cmd_mac_addr =
+ &resp->params.mac_addr;
+
+ memcpy(priv->curr_addr, cmd_mac_addr->mac_addr, ETH_ALEN);
+
+ dev_dbg(priv->adapter->dev,
+ "info: set mac address: %pM\n", priv->curr_addr);
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of set/get MAC multicast
+ * address.
+ */
+static int mwifiex_ret_mac_multicast_adr(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ return 0;
+}
+
+/*
+ * This function handles the command response of get Tx rate query.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving the Tx rate and HT information parameters in driver.
+ *
+ * Both rate configuration and current data rate can be retrieved
+ * with this request.
+ */
+static int mwifiex_ret_802_11_tx_rate_query(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ priv->tx_rate = resp->params.tx_rate.tx_rate;
+ priv->tx_htinfo = resp->params.tx_rate.ht_info;
+ if (!priv->is_data_rate_auto)
+ priv->data_rate =
+ mwifiex_index_to_data_rate(priv->tx_rate,
+ priv->tx_htinfo);
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of a deauthenticate
+ * command.
+ *
+ * If the deauthenticated MAC matches the current BSS MAC, the connection
+ * state is reset.
+ */
+static int mwifiex_ret_802_11_deauthenticate(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ adapter->dbg.num_cmd_deauth++;
+ if (!memcmp(resp->params.deauth.mac_addr,
+ &priv->curr_bss_params.bss_descriptor.mac_address,
+ sizeof(resp->params.deauth.mac_addr)))
+ mwifiex_reset_connect_state(priv);
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of ad-hoc stop.
+ *
+ * The function resets the connection state in driver.
+ */
+static int mwifiex_ret_802_11_ad_hoc_stop(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ mwifiex_reset_connect_state(priv);
+ return 0;
+}
+
+/*
+ * This function handles the command response of set/get key material.
+ *
+ * Handling includes updating the driver parameters to reflect the
+ * changes.
+ */
+static int mwifiex_ret_802_11_key_material(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct host_cmd_ds_802_11_key_material *key =
+ &resp->params.key_material;
+
+ if (le16_to_cpu(key->action) == HostCmd_ACT_GEN_SET) {
+ if ((le16_to_cpu(key->key_param_set.key_info) & KEY_MCAST)) {
+ dev_dbg(priv->adapter->dev, "info: key: GTK is set\n");
+ priv->wpa_is_gtk_set = true;
+ priv->scan_block = false;
+ }
+ }
+
+ memset(priv->aes_key.key_param_set.key, 0,
+ sizeof(key->key_param_set.key));
+ priv->aes_key.key_param_set.key_len = key->key_param_set.key_len;
+ memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key,
+ le16_to_cpu(priv->aes_key.key_param_set.key_len));
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of get 11d domain information.
+ */
+static int mwifiex_ret_802_11d_domain_info(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct host_cmd_ds_802_11d_domain_info_rsp *domain_info =
+ &resp->params.domain_info_resp;
+ struct mwifiex_ietypes_domain_param_set *domain = &domain_info->domain;
+ u16 action = le16_to_cpu(domain_info->action);
+ u8 no_of_triplet;
+
+ no_of_triplet = (u8) ((le16_to_cpu(domain->header.len) -
+ IEEE80211_COUNTRY_STRING_LEN) /
+ sizeof(struct ieee80211_country_ie_triplet));
+
+ dev_dbg(priv->adapter->dev, "info: 11D Domain Info Resp:"
+ " no_of_triplet=%d\n", no_of_triplet);
+
+ if (no_of_triplet > MWIFIEX_MAX_TRIPLET_802_11D) {
+ dev_warn(priv->adapter->dev,
+ "11D: invalid number of triplets %d "
+ "returned!!\n", no_of_triplet);
+ return -1;
+ }
+
+ switch (action) {
+ case HostCmd_ACT_GEN_SET: /* Proc Set Action */
+ break;
+ case HostCmd_ACT_GEN_GET:
+ break;
+ default:
+ dev_err(priv->adapter->dev,
+ "11D: invalid action:%d\n", domain_info->action);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of get RF channel.
+ *
+ * Handling includes changing the header fields into CPU format
+ * and saving the new channel in driver.
+ */
+static int mwifiex_ret_802_11_rf_channel(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct host_cmd_ds_802_11_rf_channel *rf_channel =
+ &resp->params.rf_channel;
+ u16 new_channel = le16_to_cpu(rf_channel->current_channel);
+
+ if (priv->curr_bss_params.bss_descriptor.channel != new_channel) {
+ dev_dbg(priv->adapter->dev, "cmd: Channel Switch: %d to %d\n",
+ priv->curr_bss_params.bss_descriptor.channel,
+ new_channel);
+ /* Update the channel again */
+ priv->curr_bss_params.bss_descriptor.channel = new_channel;
+ }
+ if (data_buf)
+ *((u16 *)data_buf) = new_channel;
+
+ return 0;
+}
+
+/*
+ * This function handles the command response of get extended version.
+ *
+ * Handling includes forming the extended version string and sending it
+ * to application.
+ */
+static int mwifiex_ret_ver_ext(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct host_cmd_ds_version_ext *ver_ext = &resp->params.verext;
+ struct host_cmd_ds_version_ext *version_ext;
+
+ if (data_buf) {
+ version_ext = (struct host_cmd_ds_version_ext *)data_buf;
+ version_ext->version_str_sel = ver_ext->version_str_sel;
+ memcpy(version_ext->version_str, ver_ext->version_str,
+ sizeof(char) * 128);
+ memcpy(priv->version_str, ver_ext->version_str, 128);
+ }
+ return 0;
+}
+
+/*
+ * This function handles the command response of register access.
+ *
+ * The register value and offset are returned to the user. For EEPROM
+ * access, the byte count is also returned.
+ */
+static int mwifiex_ret_reg_access(u16 type, struct host_cmd_ds_command *resp,
+ void *data_buf)
+{
+ struct mwifiex_ds_reg_rw *reg_rw;
+ struct mwifiex_ds_read_eeprom *eeprom;
+
+ if (data_buf) {
+ reg_rw = (struct mwifiex_ds_reg_rw *) data_buf;
+ eeprom = (struct mwifiex_ds_read_eeprom *) data_buf;
+ switch (type) {
+ case HostCmd_CMD_MAC_REG_ACCESS:
+ {
+ struct host_cmd_ds_mac_reg_access *reg;
+ reg = (struct host_cmd_ds_mac_reg_access *)
+ &resp->params.mac_reg;
+ reg_rw->offset = cpu_to_le32(
+ (u32) le16_to_cpu(reg->offset));
+ reg_rw->value = reg->value;
+ break;
+ }
+ case HostCmd_CMD_BBP_REG_ACCESS:
+ {
+ struct host_cmd_ds_bbp_reg_access *reg;
+ reg = (struct host_cmd_ds_bbp_reg_access *)
+ &resp->params.bbp_reg;
+ reg_rw->offset = cpu_to_le32(
+ (u32) le16_to_cpu(reg->offset));
+ reg_rw->value = cpu_to_le32((u32) reg->value);
+ break;
+ }
+
+ case HostCmd_CMD_RF_REG_ACCESS:
+ {
+ struct host_cmd_ds_rf_reg_access *reg;
+ reg = (struct host_cmd_ds_rf_reg_access *)
+ &resp->params.rf_reg;
+ reg_rw->offset = cpu_to_le32(
+ (u32) le16_to_cpu(reg->offset));
+ reg_rw->value = cpu_to_le32((u32) reg->value);
+ break;
+ }
+ case HostCmd_CMD_PMIC_REG_ACCESS:
+ {
+ struct host_cmd_ds_pmic_reg_access *reg;
+ reg = (struct host_cmd_ds_pmic_reg_access *)
+ &resp->params.pmic_reg;
+ reg_rw->offset = cpu_to_le32(
+ (u32) le16_to_cpu(reg->offset));
+ reg_rw->value = cpu_to_le32((u32) reg->value);
+ break;
+ }
+ case HostCmd_CMD_CAU_REG_ACCESS:
+ {
+ struct host_cmd_ds_rf_reg_access *reg;
+ reg = (struct host_cmd_ds_rf_reg_access *)
+ &resp->params.rf_reg;
+ reg_rw->offset = cpu_to_le32(
+ (u32) le16_to_cpu(reg->offset));
+ reg_rw->value = cpu_to_le32((u32) reg->value);
+ break;
+ }
+ case HostCmd_CMD_802_11_EEPROM_ACCESS:
+ {
+ struct host_cmd_ds_802_11_eeprom_access
+ *cmd_eeprom =
+ (struct host_cmd_ds_802_11_eeprom_access
+ *) &resp->params.eeprom;
+ pr_debug("info: EEPROM read len=%x\n",
+ cmd_eeprom->byte_count);
+ if (le16_to_cpu(eeprom->byte_count) <
+ le16_to_cpu(
+ cmd_eeprom->byte_count)) {
+ eeprom->byte_count = cpu_to_le16(0);
+ pr_debug("info: EEPROM read "
+ "length is too big\n");
+ return -1;
+ }
+ eeprom->offset = cmd_eeprom->offset;
+ eeprom->byte_count = cmd_eeprom->byte_count;
+ if (le16_to_cpu(eeprom->byte_count) > 0)
+ memcpy(&eeprom->value,
+ &cmd_eeprom->value,
+ le16_to_cpu(eeprom->byte_count));
+
+ break;
+ }
+ default:
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * This function handles the command response of get IBSS coalescing status.
+ *
+ * If the received BSSID is different than the current one, the current BSSID,
+ * beacon interval, ATIM window and ERP information are updated, along with
+ * changing the ad-hoc state accordingly.
+ */
+static int mwifiex_ret_ibss_coalescing_status(struct mwifiex_private *priv,
+ struct host_cmd_ds_command *resp)
+{
+ struct host_cmd_ds_802_11_ibss_status *ibss_coal_resp =
+ &(resp->params.ibss_coalescing);
+ u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
+
+ if (le16_to_cpu(ibss_coal_resp->action) == HostCmd_ACT_GEN_SET)
+ return 0;
+
+ dev_dbg(priv->adapter->dev,
+ "info: new BSSID %pM\n", ibss_coal_resp->bssid);
+
+ /* If rsp has NULL BSSID, Just return..... No Action */
+ if (!memcmp(ibss_coal_resp->bssid, zero_mac, ETH_ALEN)) {
+ dev_warn(priv->adapter->dev, "new BSSID is NULL\n");
+ return 0;
+ }
+
+ /* If BSSID is diff, modify current BSS parameters */
+ if (memcmp(priv->curr_bss_params.bss_descriptor.mac_address,
+ ibss_coal_resp->bssid, ETH_ALEN)) {
+ /* BSSID */
+ memcpy(priv->curr_bss_params.bss_descriptor.mac_address,
+ ibss_coal_resp->bssid, ETH_ALEN);
+
+ /* Beacon Interval */
+ priv->curr_bss_params.bss_descriptor.beacon_period
+ = le16_to_cpu(ibss_coal_resp->beacon_interval);
+
+ /* ERP Information */
+ priv->curr_bss_params.bss_descriptor.erp_flags =
+ (u8) le16_to_cpu(ibss_coal_resp->use_g_rate_protect);
+
+ priv->adhoc_state = ADHOC_COALESCED;
+ }
+
+ return 0;
+}
+
+/*
+ * This function handles the command responses.
+ *
+ * This is a generic function, which calls command specific
+ * response handlers based on the command ID.
+ */
+int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv,
+ u16 cmdresp_no, void *cmd_buf)
+{
+ int ret = 0;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct host_cmd_ds_command *resp =
+ (struct host_cmd_ds_command *) cmd_buf;
+ void *data_buf = adapter->curr_cmd->data_buf;
+
+ /* If the command is not successful, cleanup and return failure */
+ if (resp->result != HostCmd_RESULT_OK) {
+ mwifiex_process_cmdresp_error(priv, resp);
+ return -1;
+ }
+ /* Command successful, handle response */
+ switch (cmdresp_no) {
+ case HostCmd_CMD_GET_HW_SPEC:
+ ret = mwifiex_ret_get_hw_spec(priv, resp);
+ break;
+ case HostCmd_CMD_MAC_CONTROL:
+ break;
+ case HostCmd_CMD_802_11_MAC_ADDRESS:
+ ret = mwifiex_ret_802_11_mac_address(priv, resp);
+ break;
+ case HostCmd_CMD_MAC_MULTICAST_ADR:
+ ret = mwifiex_ret_mac_multicast_adr(priv, resp);
+ break;
+ case HostCmd_CMD_TX_RATE_CFG:
+ ret = mwifiex_ret_tx_rate_cfg(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_802_11_SCAN:
+ ret = mwifiex_ret_802_11_scan(priv, resp);
+ adapter->curr_cmd->wait_q_enabled = false;
+ break;
+ case HostCmd_CMD_802_11_BG_SCAN_QUERY:
+ ret = mwifiex_ret_802_11_scan(priv, resp);
+ dev_dbg(adapter->dev,
+ "info: CMD_RESP: BG_SCAN result is ready!\n");
+ break;
+ case HostCmd_CMD_TXPWR_CFG:
+ ret = mwifiex_ret_tx_power_cfg(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_802_11_PS_MODE_ENH:
+ ret = mwifiex_ret_enh_power_mode(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_802_11_HS_CFG_ENH:
+ ret = mwifiex_ret_802_11_hs_cfg(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_ASSOCIATE:
+ ret = mwifiex_ret_802_11_associate(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_DEAUTHENTICATE:
+ ret = mwifiex_ret_802_11_deauthenticate(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_AD_HOC_START:
+ case HostCmd_CMD_802_11_AD_HOC_JOIN:
+ ret = mwifiex_ret_802_11_ad_hoc(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_AD_HOC_STOP:
+ ret = mwifiex_ret_802_11_ad_hoc_stop(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_GET_LOG:
+ ret = mwifiex_ret_get_log(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_RSSI_INFO:
+ ret = mwifiex_ret_802_11_rssi_info(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_802_11_SNMP_MIB:
+ ret = mwifiex_ret_802_11_snmp_mib(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_802_11_TX_RATE_QUERY:
+ ret = mwifiex_ret_802_11_tx_rate_query(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_RF_CHANNEL:
+ ret = mwifiex_ret_802_11_rf_channel(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_VERSION_EXT:
+ ret = mwifiex_ret_ver_ext(priv, resp, data_buf);
+ break;
+ case HostCmd_CMD_FUNC_INIT:
+ case HostCmd_CMD_FUNC_SHUTDOWN:
+ break;
+ case HostCmd_CMD_802_11_KEY_MATERIAL:
+ ret = mwifiex_ret_802_11_key_material(priv, resp);
+ break;
+ case HostCmd_CMD_802_11D_DOMAIN_INFO:
+ ret = mwifiex_ret_802_11d_domain_info(priv, resp);
+ break;
+ case HostCmd_CMD_11N_ADDBA_REQ:
+ ret = mwifiex_ret_11n_addba_req(priv, resp);
+ break;
+ case HostCmd_CMD_11N_DELBA:
+ ret = mwifiex_ret_11n_delba(priv, resp);
+ break;
+ case HostCmd_CMD_11N_ADDBA_RSP:
+ ret = mwifiex_ret_11n_addba_resp(priv, resp);
+ break;
+ case HostCmd_CMD_RECONFIGURE_TX_BUFF:
+ adapter->tx_buf_size = (u16) le16_to_cpu(resp->params.
+ tx_buf.buff_size);
+ adapter->tx_buf_size = (adapter->tx_buf_size /
+ MWIFIEX_SDIO_BLOCK_SIZE) *
+ MWIFIEX_SDIO_BLOCK_SIZE;
+ adapter->curr_tx_buf_size = adapter->tx_buf_size;
+ dev_dbg(adapter->dev,
+ "cmd: max_tx_buf_size=%d, tx_buf_size=%d\n",
+ adapter->max_tx_buf_size, adapter->tx_buf_size);
+
+ if (adapter->if_ops.update_mp_end_port)
+ adapter->if_ops.update_mp_end_port(adapter,
+ le16_to_cpu(resp->
+ params.
+ tx_buf.
+ mp_end_port));
+ break;
+ case HostCmd_CMD_AMSDU_AGGR_CTRL:
+ ret = mwifiex_ret_amsdu_aggr_ctrl(resp, data_buf);
+ break;
+ case HostCmd_CMD_WMM_GET_STATUS:
+ ret = mwifiex_ret_wmm_get_status(priv, resp);
+ break;
+ case HostCmd_CMD_802_11_IBSS_COALESCING_STATUS:
+ ret = mwifiex_ret_ibss_coalescing_status(priv, resp);
+ break;
+ case HostCmd_CMD_MAC_REG_ACCESS:
+ case HostCmd_CMD_BBP_REG_ACCESS:
+ case HostCmd_CMD_RF_REG_ACCESS:
+ case HostCmd_CMD_PMIC_REG_ACCESS:
+ case HostCmd_CMD_CAU_REG_ACCESS:
+ case HostCmd_CMD_802_11_EEPROM_ACCESS:
+ ret = mwifiex_ret_reg_access(cmdresp_no, resp, data_buf);
+ break;
+ case HostCmd_CMD_SET_BSS_MODE:
+ break;
+ case HostCmd_CMD_11N_CFG:
+ ret = mwifiex_ret_11n_cfg(resp, data_buf);
+ break;
+ default:
+ dev_err(adapter->dev, "CMD_RESP: unknown cmd response %#x\n",
+ resp->command);
+ break;
+ }
+
+ return ret;
+}
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
new file mode 100644
index 0000000..fc265ca
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -0,0 +1,406 @@
+/*
+ * Marvell Wireless LAN device driver: station event handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+/*
+ * This function resets the connection state.
+ *
+ * The function is invoked after receiving a disconnect event from firmware,
+ * and performs the following actions -
+ * - Set media status to disconnected
+ * - Clean up Tx and Rx packets
+ * - Resets SNR/NF/RSSI value in driver
+ * - Resets security configurations in driver
+ * - Enables auto data rate
+ * - Saves the previous SSID and BSSID so that they can
+ * be used for re-association, if required
+ * - Erases current SSID and BSSID information
+ * - Sends a disconnect event to upper layers/applications.
+ */
+void
+mwifiex_reset_connect_state(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ if (!priv->media_connected)
+ return;
+
+ dev_dbg(adapter->dev, "info: handles disconnect event\n");
+
+ priv->media_connected = false;
+
+ priv->scan_block = false;
+
+ /* Free Tx and Rx packets, report disconnect to upper layer */
+ mwifiex_clean_txrx(priv);
+
+ /* Reset SNR/NF/RSSI values */
+ priv->data_rssi_last = 0;
+ priv->data_nf_last = 0;
+ priv->data_rssi_avg = 0;
+ priv->data_nf_avg = 0;
+ priv->bcn_rssi_last = 0;
+ priv->bcn_nf_last = 0;
+ priv->bcn_rssi_avg = 0;
+ priv->bcn_nf_avg = 0;
+ priv->rxpd_rate = 0;
+ priv->rxpd_htinfo = 0;
+ priv->sec_info.wpa_enabled = false;
+ priv->sec_info.wpa2_enabled = false;
+ priv->wpa_ie_len = 0;
+
+ priv->sec_info.wapi_enabled = false;
+ priv->wapi_ie_len = 0;
+ priv->sec_info.wapi_key_on = false;
+
+ priv->sec_info.encryption_mode = 0;
+
+ /* Enable auto data rate */
+ priv->is_data_rate_auto = true;
+ priv->data_rate = 0;
+
+ if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+ priv->adhoc_state = ADHOC_IDLE;
+ priv->adhoc_is_link_sensed = false;
+ }
+
+ /*
+ * Memorize the previous SSID and BSSID so
+ * it could be used for re-assoc
+ */
+
+ dev_dbg(adapter->dev, "info: previous SSID=%s, SSID len=%u\n",
+ priv->prev_ssid.ssid, priv->prev_ssid.ssid_len);
+
+ dev_dbg(adapter->dev, "info: current SSID=%s, SSID len=%u\n",
+ priv->curr_bss_params.bss_descriptor.ssid.ssid,
+ priv->curr_bss_params.bss_descriptor.ssid.ssid_len);
+
+ memcpy(&priv->prev_ssid,
+ &priv->curr_bss_params.bss_descriptor.ssid,
+ sizeof(struct mwifiex_802_11_ssid));
+
+ memcpy(priv->prev_bssid,
+ priv->curr_bss_params.bss_descriptor.mac_address, ETH_ALEN);
+
+ /* Need to erase the current SSID and BSSID info */
+ memset(&priv->curr_bss_params, 0x00, sizeof(priv->curr_bss_params));
+
+ adapter->tx_lock_flag = false;
+ adapter->pps_uapsd_mode = false;
+
+ if (adapter->num_cmd_timeout && adapter->curr_cmd)
+ return;
+ priv->media_connected = false;
+ if (!priv->disconnect) {
+ priv->disconnect = 1;
+ dev_dbg(adapter->dev, "info: successfully disconnected from"
+ " %pM: reason code %d\n", priv->cfg_bssid,
+ WLAN_REASON_DEAUTH_LEAVING);
+ cfg80211_disconnected(priv->netdev,
+ WLAN_REASON_DEAUTH_LEAVING, NULL, 0,
+ GFP_KERNEL);
+ queue_work(priv->workqueue, &priv->cfg_workqueue);
+ }
+ if (!netif_queue_stopped(priv->netdev))
+ netif_stop_queue(priv->netdev);
+ if (netif_carrier_ok(priv->netdev))
+ netif_carrier_off(priv->netdev);
+ /* Reset wireless stats signal info */
+ priv->w_stats.qual.level = 0;
+ priv->w_stats.qual.noise = 0;
+}
+
+/*
+ * This function handles events generated by firmware.
+ *
+ * This is a generic function and handles all events.
+ *
+ * Event specific routines are called by this function based
+ * upon the generated event cause.
+ *
+ * For the following events, the function just forwards them to upper
+ * layers, optionally recording the change -
+ * - EVENT_LINK_SENSED
+ * - EVENT_MIC_ERR_UNICAST
+ * - EVENT_MIC_ERR_MULTICAST
+ * - EVENT_PORT_RELEASE
+ * - EVENT_RSSI_LOW
+ * - EVENT_SNR_LOW
+ * - EVENT_MAX_FAIL
+ * - EVENT_RSSI_HIGH
+ * - EVENT_SNR_HIGH
+ * - EVENT_DATA_RSSI_LOW
+ * - EVENT_DATA_SNR_LOW
+ * - EVENT_DATA_RSSI_HIGH
+ * - EVENT_DATA_SNR_HIGH
+ * - EVENT_LINK_QUALITY
+ * - EVENT_PRE_BEACON_LOST
+ * - EVENT_IBSS_COALESCED
+ * - EVENT_WEP_ICV_ERR
+ * - EVENT_BW_CHANGE
+ * - EVENT_HOSTWAKE_STAIE
+ *
+ * For the following events, no action is taken -
+ * - EVENT_MIB_CHANGED
+ * - EVENT_INIT_DONE
+ * - EVENT_DUMMY_HOST_WAKEUP_SIGNAL
+ *
+ * Rest of the supported events requires driver handling -
+ * - EVENT_DEAUTHENTICATED
+ * - EVENT_DISASSOCIATED
+ * - EVENT_LINK_LOST
+ * - EVENT_PS_SLEEP
+ * - EVENT_PS_AWAKE
+ * - EVENT_DEEP_SLEEP_AWAKE
+ * - EVENT_HS_ACT_REQ
+ * - EVENT_ADHOC_BCN_LOST
+ * - EVENT_BG_SCAN_REPORT
+ * - EVENT_WMM_STATUS_CHANGE
+ * - EVENT_ADDBA
+ * - EVENT_DELBA
+ * - EVENT_BA_STREAM_TIEMOUT
+ * - EVENT_AMSDU_AGGR_CTRL
+ */
+int mwifiex_process_sta_event(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int ret = 0;
+ u32 eventcause = adapter->event_cause;
+
+ switch (eventcause) {
+ case EVENT_DUMMY_HOST_WAKEUP_SIGNAL:
+ dev_err(adapter->dev, "invalid EVENT: DUMMY_HOST_WAKEUP_SIGNAL,"
+ " ignoring it\n");
+ break;
+ case EVENT_LINK_SENSED:
+ dev_dbg(adapter->dev, "event: LINK_SENSED\n");
+ if (!netif_carrier_ok(priv->netdev))
+ netif_carrier_on(priv->netdev);
+ if (netif_queue_stopped(priv->netdev))
+ netif_wake_queue(priv->netdev);
+ break;
+
+ case EVENT_DEAUTHENTICATED:
+ dev_dbg(adapter->dev, "event: Deauthenticated\n");
+ adapter->dbg.num_event_deauth++;
+ if (priv->media_connected)
+ mwifiex_reset_connect_state(priv);
+ break;
+
+ case EVENT_DISASSOCIATED:
+ dev_dbg(adapter->dev, "event: Disassociated\n");
+ adapter->dbg.num_event_disassoc++;
+ if (priv->media_connected)
+ mwifiex_reset_connect_state(priv);
+ break;
+
+ case EVENT_LINK_LOST:
+ dev_dbg(adapter->dev, "event: Link lost\n");
+ adapter->dbg.num_event_link_lost++;
+ if (priv->media_connected)
+ mwifiex_reset_connect_state(priv);
+ break;
+
+ case EVENT_PS_SLEEP:
+ dev_dbg(adapter->dev, "info: EVENT: SLEEP\n");
+
+ adapter->ps_state = PS_STATE_PRE_SLEEP;
+
+ mwifiex_check_ps_cond(adapter);
+ break;
+
+ case EVENT_PS_AWAKE:
+ dev_dbg(adapter->dev, "info: EVENT: AWAKE\n");
+ if (!adapter->pps_uapsd_mode &&
+ priv->media_connected &&
+ adapter->sleep_period.period) {
+ adapter->pps_uapsd_mode = true;
+ dev_dbg(adapter->dev,
+ "event: PPS/UAPSD mode activated\n");
+ }
+ adapter->tx_lock_flag = false;
+ if (adapter->pps_uapsd_mode && adapter->gen_null_pkt) {
+ if (mwifiex_check_last_packet_indication(priv)) {
+ if (!adapter->data_sent) {
+ if (!mwifiex_send_null_packet(priv,
+ MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET
+ |
+ MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET))
+ adapter->ps_state =
+ PS_STATE_SLEEP;
+ return 0;
+ }
+ }
+ }
+ adapter->ps_state = PS_STATE_AWAKE;
+ adapter->pm_wakeup_card_req = false;
+ adapter->pm_wakeup_fw_try = false;
+
+ break;
+
+ case EVENT_DEEP_SLEEP_AWAKE:
+ adapter->if_ops.wakeup_complete(adapter);
+ dev_dbg(adapter->dev, "event: DS_AWAKE\n");
+ if (adapter->is_deep_sleep)
+ adapter->is_deep_sleep = false;
+ break;
+
+ case EVENT_HS_ACT_REQ:
+ dev_dbg(adapter->dev, "event: HS_ACT_REQ\n");
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_HS_CFG_ENH,
+ 0, 0, NULL);
+ break;
+
+ case EVENT_MIC_ERR_UNICAST:
+ dev_dbg(adapter->dev, "event: UNICAST MIC ERROR\n");
+ break;
+
+ case EVENT_MIC_ERR_MULTICAST:
+ dev_dbg(adapter->dev, "event: MULTICAST MIC ERROR\n");
+ break;
+ case EVENT_MIB_CHANGED:
+ case EVENT_INIT_DONE:
+ break;
+
+ case EVENT_ADHOC_BCN_LOST:
+ dev_dbg(adapter->dev, "event: ADHOC_BCN_LOST\n");
+ priv->adhoc_is_link_sensed = false;
+ mwifiex_clean_txrx(priv);
+ if (!netif_queue_stopped(priv->netdev))
+ netif_stop_queue(priv->netdev);
+ if (netif_carrier_ok(priv->netdev))
+ netif_carrier_off(priv->netdev);
+ break;
+
+ case EVENT_BG_SCAN_REPORT:
+ dev_dbg(adapter->dev, "event: BGS_REPORT\n");
+ /* Clear the previous scan result */
+ memset(adapter->scan_table, 0x00,
+ sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP);
+ adapter->num_in_scan_table = 0;
+ adapter->bcn_buf_end = adapter->bcn_buf;
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_BG_SCAN_QUERY,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+ break;
+
+ case EVENT_PORT_RELEASE:
+ dev_dbg(adapter->dev, "event: PORT RELEASE\n");
+ break;
+
+ case EVENT_WMM_STATUS_CHANGE:
+ dev_dbg(adapter->dev, "event: WMM status changed\n");
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_WMM_GET_STATUS,
+ 0, 0, NULL);
+ break;
+
+ case EVENT_RSSI_LOW:
+ dev_dbg(adapter->dev, "event: Beacon RSSI_LOW\n");
+ break;
+ case EVENT_SNR_LOW:
+ dev_dbg(adapter->dev, "event: Beacon SNR_LOW\n");
+ break;
+ case EVENT_MAX_FAIL:
+ dev_dbg(adapter->dev, "event: MAX_FAIL\n");
+ break;
+ case EVENT_RSSI_HIGH:
+ dev_dbg(adapter->dev, "event: Beacon RSSI_HIGH\n");
+ break;
+ case EVENT_SNR_HIGH:
+ dev_dbg(adapter->dev, "event: Beacon SNR_HIGH\n");
+ break;
+ case EVENT_DATA_RSSI_LOW:
+ dev_dbg(adapter->dev, "event: Data RSSI_LOW\n");
+ break;
+ case EVENT_DATA_SNR_LOW:
+ dev_dbg(adapter->dev, "event: Data SNR_LOW\n");
+ break;
+ case EVENT_DATA_RSSI_HIGH:
+ dev_dbg(adapter->dev, "event: Data RSSI_HIGH\n");
+ break;
+ case EVENT_DATA_SNR_HIGH:
+ dev_dbg(adapter->dev, "event: Data SNR_HIGH\n");
+ break;
+ case EVENT_LINK_QUALITY:
+ dev_dbg(adapter->dev, "event: Link Quality\n");
+ break;
+ case EVENT_PRE_BEACON_LOST:
+ dev_dbg(adapter->dev, "event: Pre-Beacon Lost\n");
+ break;
+ case EVENT_IBSS_COALESCED:
+ dev_dbg(adapter->dev, "event: IBSS_COALESCED\n");
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+ break;
+ case EVENT_ADDBA:
+ dev_dbg(adapter->dev, "event: ADDBA Request\n");
+ mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_ADDBA_RSP,
+ HostCmd_ACT_GEN_SET, 0,
+ adapter->event_body);
+ break;
+ case EVENT_DELBA:
+ dev_dbg(adapter->dev, "event: DELBA Request\n");
+ mwifiex_11n_delete_ba_stream(priv, adapter->event_body);
+ break;
+ case EVENT_BA_STREAM_TIEMOUT:
+ dev_dbg(adapter->dev, "event: BA Stream timeout\n");
+ mwifiex_11n_ba_stream_timeout(priv,
+ (struct host_cmd_ds_11n_batimeout
+ *)
+ adapter->event_body);
+ break;
+ case EVENT_AMSDU_AGGR_CTRL:
+ dev_dbg(adapter->dev, "event: AMSDU_AGGR_CTRL %d\n",
+ *(u16 *) adapter->event_body);
+ adapter->tx_buf_size =
+ min(adapter->curr_tx_buf_size,
+ le16_to_cpu(*(__le16 *) adapter->event_body));
+ dev_dbg(adapter->dev, "event: tx_buf_size %d\n",
+ adapter->tx_buf_size);
+ break;
+
+ case EVENT_WEP_ICV_ERR:
+ dev_dbg(adapter->dev, "event: WEP ICV error\n");
+ break;
+
+ case EVENT_BW_CHANGE:
+ dev_dbg(adapter->dev, "event: BW Change\n");
+ break;
+
+ case EVENT_HOSTWAKE_STAIE:
+ dev_dbg(adapter->dev, "event: HOSTWAKE_STAIE %d\n", eventcause);
+ break;
+ default:
+ dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
+ eventcause);
+ break;
+ }
+
+ return ret;
+}
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
new file mode 100644
index 0000000..d05907d
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -0,0 +1,1593 @@
+/*
+ * Marvell Wireless LAN device driver: functions for station ioctl
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+#include "cfg80211.h"
+
+/*
+ * Copies the multicast address list from device to driver.
+ *
+ * This function does not validate the destination memory for
+ * size, and the calling function must ensure enough memory is
+ * available.
+ */
+int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
+ struct net_device *dev)
+{
+ int i = 0;
+ struct netdev_hw_addr *ha;
+
+ netdev_for_each_mc_addr(ha, dev)
+ memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);
+
+ return i;
+}
+
+/*
+ * Wait queue completion handler.
+ *
+ * This function waits on a cmd wait queue. It also cancels the pending
+ * request after waking up, in case of errors.
+ */
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
+{
+ bool cancel_flag = false;
+ int status = adapter->cmd_wait_q.status;
+
+ dev_dbg(adapter->dev, "cmd pending\n");
+ atomic_inc(&adapter->cmd_pending);
+
+ /* Status pending, wake up main process */
+ queue_work(adapter->workqueue, &adapter->main_work);
+
+ /* Wait for completion */
+ wait_event_interruptible(adapter->cmd_wait_q.wait,
+ adapter->cmd_wait_q.condition);
+ if (!adapter->cmd_wait_q.condition)
+ cancel_flag = true;
+
+ if (cancel_flag) {
+ mwifiex_cancel_pending_ioctl(adapter);
+ dev_dbg(adapter->dev, "cmd cancel\n");
+ }
+ adapter->cmd_wait_q.status = 0;
+
+ return status;
+}
+
+/*
+ * This function prepares the correct firmware command and
+ * issues it to set the multicast list.
+ *
+ * This function can be used to enable promiscuous mode, or enable all
+ * multicast packets, or to enable selective multicast.
+ */
+int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
+ struct mwifiex_multicast_list *mcast_list)
+{
+ int ret = 0;
+ u16 old_pkt_filter;
+
+ old_pkt_filter = priv->curr_pkt_filter;
+
+ if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
+ dev_dbg(priv->adapter->dev, "info: Enable Promiscuous mode\n");
+ priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
+ priv->curr_pkt_filter &=
+ ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
+ } else {
+ /* Multicast */
+ priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
+ if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) {
+ dev_dbg(priv->adapter->dev,
+ "info: Enabling All Multicast!\n");
+ priv->curr_pkt_filter |=
+ HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
+ } else {
+ priv->curr_pkt_filter &=
+ ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
+ if (mcast_list->num_multicast_addr) {
+ dev_dbg(priv->adapter->dev,
+ "info: Set multicast list=%d\n",
+ mcast_list->num_multicast_addr);
+ /* Set multicast addresses to firmware */
+ if (old_pkt_filter == priv->curr_pkt_filter) {
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_MAC_MULTICAST_ADR,
+ HostCmd_ACT_GEN_SET, 0,
+ mcast_list);
+ } else {
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_MAC_MULTICAST_ADR,
+ HostCmd_ACT_GEN_SET, 0,
+ mcast_list);
+ }
+ }
+ }
+ }
+ dev_dbg(priv->adapter->dev,
+ "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
+ old_pkt_filter, priv->curr_pkt_filter);
+ if (old_pkt_filter != priv->curr_pkt_filter) {
+ ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
+ HostCmd_ACT_GEN_SET,
+ 0, &priv->curr_pkt_filter);
+ }
+
+ return ret;
+}
+
+/*
+ * In Ad-Hoc mode, the IBSS is created if not found in scan list.
+ * In both Ad-Hoc and infra mode, an deauthentication is performed
+ * first.
+ */
+int mwifiex_bss_start(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *ssid_bssid)
+{
+ int ret;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ s32 i = -1;
+
+ priv->scan_block = false;
+ if (!ssid_bssid)
+ return -1;
+
+ if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ /* Infra mode */
+ ret = mwifiex_deauthenticate(priv, NULL);
+ if (ret)
+ return ret;
+
+ /* Search for the requested SSID in the scan table */
+ if (ssid_bssid->ssid.ssid_len)
+ i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid,
+ NULL, NL80211_IFTYPE_STATION);
+ else
+ i = mwifiex_find_bssid_in_list(priv,
+ (u8 *) &ssid_bssid->bssid,
+ NL80211_IFTYPE_STATION);
+ if (i < 0)
+ return -1;
+
+ dev_dbg(adapter->dev,
+ "info: SSID found in scan list ... associating...\n");
+
+ /* Clear any past association response stored for
+ * application retrieval */
+ priv->assoc_rsp_size = 0;
+ ret = mwifiex_associate(priv, &adapter->scan_table[i]);
+ if (ret)
+ return ret;
+ } else {
+ /* Adhoc mode */
+ /* If the requested SSID matches current SSID, return */
+ if (ssid_bssid->ssid.ssid_len &&
+ (!mwifiex_ssid_cmp
+ (&priv->curr_bss_params.bss_descriptor.ssid,
+ &ssid_bssid->ssid)))
+ return 0;
+
+ /* Exit Adhoc mode first */
+ dev_dbg(adapter->dev, "info: Sending Adhoc Stop\n");
+ ret = mwifiex_deauthenticate(priv, NULL);
+ if (ret)
+ return ret;
+
+ priv->adhoc_is_link_sensed = false;
+
+ /* Search for the requested network in the scan table */
+ if (ssid_bssid->ssid.ssid_len)
+ i = mwifiex_find_ssid_in_list(priv,
+ &ssid_bssid->ssid, NULL,
+ NL80211_IFTYPE_ADHOC);
+ else
+ i = mwifiex_find_bssid_in_list(priv,
+ (u8 *)&ssid_bssid->bssid,
+ NL80211_IFTYPE_ADHOC);
+
+ if (i >= 0) {
+ dev_dbg(adapter->dev, "info: network found in scan"
+ " list. Joining...\n");
+ ret = mwifiex_adhoc_join(priv, &adapter->scan_table[i]);
+ if (ret)
+ return ret;
+ } else {
+ dev_dbg(adapter->dev, "info: Network not found in "
+ "the list, creating adhoc with ssid = %s\n",
+ ssid_bssid->ssid.ssid);
+ ret = mwifiex_adhoc_start(priv, &ssid_bssid->ssid);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set host sleep configuration.
+ *
+ * This function prepares the correct firmware command and
+ * issues it.
+ */
+int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
+ int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)
+
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int status = 0;
+ u32 prev_cond = 0;
+
+ if (!hs_cfg)
+ return -ENOMEM;
+
+ switch (action) {
+ case HostCmd_ACT_GEN_SET:
+ if (adapter->pps_uapsd_mode) {
+ dev_dbg(adapter->dev, "info: Host Sleep IOCTL"
+ " is blocked in UAPSD/PPS mode\n");
+ status = -1;
+ break;
+ }
+ if (hs_cfg->is_invoke_hostcmd) {
+ if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL) {
+ if (!adapter->is_hs_configured)
+ /* Already cancelled */
+ break;
+ /* Save previous condition */
+ prev_cond = le32_to_cpu(adapter->hs_cfg
+ .conditions);
+ adapter->hs_cfg.conditions =
+ cpu_to_le32(hs_cfg->conditions);
+ } else if (hs_cfg->conditions) {
+ adapter->hs_cfg.conditions =
+ cpu_to_le32(hs_cfg->conditions);
+ adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
+ if (hs_cfg->gap)
+ adapter->hs_cfg.gap = (u8)hs_cfg->gap;
+ } else if (adapter->hs_cfg.conditions ==
+ cpu_to_le32(
+ HOST_SLEEP_CFG_CANCEL)) {
+ /* Return failure if no parameters for HS
+ enable */
+ status = -1;
+ break;
+ }
+ if (cmd_type == MWIFIEX_SYNC_CMD)
+ status = mwifiex_send_cmd_sync(priv,
+ HostCmd_CMD_802_11_HS_CFG_ENH,
+ HostCmd_ACT_GEN_SET, 0,
+ &adapter->hs_cfg);
+ else
+ status = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_HS_CFG_ENH,
+ HostCmd_ACT_GEN_SET, 0,
+ &adapter->hs_cfg);
+ if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL)
+ /* Restore previous condition */
+ adapter->hs_cfg.conditions =
+ cpu_to_le32(prev_cond);
+ } else {
+ adapter->hs_cfg.conditions =
+ cpu_to_le32(hs_cfg->conditions);
+ adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
+ adapter->hs_cfg.gap = (u8)hs_cfg->gap;
+ }
+ break;
+ case HostCmd_ACT_GEN_GET:
+ hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
+ hs_cfg->gpio = adapter->hs_cfg.gpio;
+ hs_cfg->gap = adapter->hs_cfg.gap;
+ break;
+ default:
+ status = -1;
+ break;
+ }
+
+ return status;
+}
+
+/*
+ * Sends IOCTL request to cancel the existing Host Sleep configuration.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type)
+{
+ struct mwifiex_ds_hs_cfg hscfg;
+
+ hscfg.conditions = HOST_SLEEP_CFG_CANCEL;
+ hscfg.is_invoke_hostcmd = true;
+
+ return mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
+ cmd_type, &hscfg);
+}
+EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);
+
+/*
+ * Sends IOCTL request to cancel the existing Host Sleep configuration.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_ds_hs_cfg hscfg;
+
+ if (adapter->hs_activated) {
+ dev_dbg(adapter->dev, "cmd: HS Already actived\n");
+ return true;
+ }
+
+ adapter->hs_activate_wait_q_woken = false;
+
+ memset(&hscfg, 0, sizeof(struct mwifiex_hs_config_param));
+ hscfg.is_invoke_hostcmd = true;
+
+ if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
+ MWIFIEX_BSS_ROLE_STA),
+ HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
+ &hscfg)) {
+ dev_err(adapter->dev, "IOCTL request HS enable failed\n");
+ return false;
+ }
+
+ wait_event_interruptible(adapter->hs_activate_wait_q,
+ adapter->hs_activate_wait_q_woken);
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(mwifiex_enable_hs);
+
+/*
+ * IOCTL request handler to get BSS information.
+ *
+ * This function collates the information from different driver structures
+ * to send to the user.
+ */
+int mwifiex_get_bss_info(struct mwifiex_private *priv,
+ struct mwifiex_bss_info *info)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bssdescriptor *bss_desc;
+ s32 tbl_idx;
+
+ if (!info)
+ return -1;
+
+ bss_desc = &priv->curr_bss_params.bss_descriptor;
+
+ info->bss_mode = priv->bss_mode;
+
+ memcpy(&info->ssid, &bss_desc->ssid,
+ sizeof(struct mwifiex_802_11_ssid));
+
+ memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);
+
+ info->bss_chan = bss_desc->channel;
+
+ info->region_code = adapter->region_code;
+
+ /* Scan table index if connected */
+ info->scan_table_idx = 0;
+ if (priv->media_connected) {
+ tbl_idx =
+ mwifiex_find_ssid_in_list(priv, &bss_desc->ssid,
+ bss_desc->mac_address,
+ priv->bss_mode);
+ if (tbl_idx >= 0)
+ info->scan_table_idx = tbl_idx;
+ }
+
+ info->media_connected = priv->media_connected;
+
+ info->max_power_level = priv->max_tx_power_level;
+ info->min_power_level = priv->min_tx_power_level;
+
+ info->adhoc_state = priv->adhoc_state;
+
+ info->bcn_nf_last = priv->bcn_nf_last;
+
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
+ info->wep_status = true;
+ else
+ info->wep_status = false;
+
+ info->is_hs_configured = adapter->is_hs_configured;
+ info->is_deep_sleep = adapter->is_deep_sleep;
+
+ return 0;
+}
+
+/*
+ * The function sets band configurations.
+ *
+ * it performs extra checks to make sure the Ad-Hoc
+ * band and channel are compatible. Otherwise it returns an error.
+ *
+ */
+int mwifiex_set_radio_band_cfg(struct mwifiex_private *priv,
+ struct mwifiex_ds_band_cfg *radio_cfg)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u8 infra_band, adhoc_band;
+ u32 adhoc_channel;
+
+ infra_band = (u8) radio_cfg->config_bands;
+ adhoc_band = (u8) radio_cfg->adhoc_start_band;
+ adhoc_channel = radio_cfg->adhoc_channel;
+
+ /* SET Infra band */
+ if ((infra_band | adapter->fw_bands) & ~adapter->fw_bands)
+ return -1;
+
+ adapter->config_bands = infra_band;
+
+ /* SET Ad-hoc Band */
+ if ((adhoc_band | adapter->fw_bands) & ~adapter->fw_bands)
+ return -1;
+
+ if (adhoc_band)
+ adapter->adhoc_start_band = adhoc_band;
+ adapter->chan_offset = (u8) radio_cfg->sec_chan_offset;
+ /*
+ * If no adhoc_channel is supplied verify if the existing adhoc
+ * channel compiles with new adhoc_band
+ */
+ if (!adhoc_channel) {
+ if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv, adapter->adhoc_start_band,
+ priv->adhoc_channel)) {
+ /* Pass back the default channel */
+ radio_cfg->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
+ if ((adapter->adhoc_start_band & BAND_A)
+ || (adapter->adhoc_start_band & BAND_AN))
+ radio_cfg->adhoc_channel =
+ DEFAULT_AD_HOC_CHANNEL_A;
+ }
+ } else { /* Retrurn error if adhoc_band and
+ adhoc_channel combination is invalid */
+ if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv, adapter->adhoc_start_band, (u16) adhoc_channel))
+ return -1;
+ priv->adhoc_channel = (u8) adhoc_channel;
+ }
+ if ((adhoc_band & BAND_GN) || (adhoc_band & BAND_AN))
+ adapter->adhoc_11n_enabled = true;
+ else
+ adapter->adhoc_11n_enabled = false;
+
+ return 0;
+}
+
+/*
+ * IOCTL request handler to set/get active channel.
+ *
+ * This function performs validity checking on channel/frequency
+ * compatibility and returns failure if not valid.
+ */
+int mwifiex_bss_set_channel(struct mwifiex_private *priv,
+ struct mwifiex_chan_freq_power *chan)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_chan_freq_power *cfp = NULL;
+
+ if (!chan)
+ return -1;
+
+ if (!chan->channel && !chan->freq)
+ return -1;
+ if (adapter->adhoc_start_band & BAND_AN)
+ adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN;
+ else if (adapter->adhoc_start_band & BAND_A)
+ adapter->adhoc_start_band = BAND_G | BAND_B;
+ if (chan->channel) {
+ if (chan->channel <= MAX_CHANNEL_BAND_BG)
+ cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv, 0, (u16) chan->channel);
+ if (!cfp) {
+ cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211
+ (priv, BAND_A, (u16) chan->channel);
+ if (cfp) {
+ if (adapter->adhoc_11n_enabled)
+ adapter->adhoc_start_band = BAND_A
+ | BAND_AN;
+ else
+ adapter->adhoc_start_band = BAND_A;
+ }
+ }
+ } else {
+ if (chan->freq <= MAX_FREQUENCY_BAND_BG)
+ cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211(
+ priv, 0, chan->freq);
+ if (!cfp) {
+ cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211
+ (priv, BAND_A, chan->freq);
+ if (cfp) {
+ if (adapter->adhoc_11n_enabled)
+ adapter->adhoc_start_band = BAND_A
+ | BAND_AN;
+ else
+ adapter->adhoc_start_band = BAND_A;
+ }
+ }
+ }
+ if (!cfp || !cfp->channel) {
+ dev_err(adapter->dev, "invalid channel/freq\n");
+ return -1;
+ }
+ priv->adhoc_channel = (u8) cfp->channel;
+ chan->channel = cfp->channel;
+ chan->freq = cfp->freq;
+
+ return 0;
+}
+
+/*
+ * IOCTL request handler to set/get Ad-Hoc channel.
+ *
+ * This function prepares the correct firmware command and
+ * issues it to set or get the ad-hoc channel.
+ */
+static int mwifiex_bss_ioctl_ibss_channel(struct mwifiex_private *priv,
+ u16 action, u16 *channel)
+{
+ if (action == HostCmd_ACT_GEN_GET) {
+ if (!priv->media_connected) {
+ *channel = priv->adhoc_channel;
+ return 0;
+ }
+ } else {
+ priv->adhoc_channel = (u8) *channel;
+ }
+
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_RF_CHANNEL,
+ action, 0, channel);
+}
+
+/*
+ * IOCTL request handler to find a particular BSS.
+ *
+ * The BSS can be searched with either a BSSID or a SSID. If none of
+ * these are provided, just the best BSS (best RSSI) is returned.
+ */
+int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *priv,
+ struct mwifiex_ssid_bssid *ssid_bssid)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_bssdescriptor *bss_desc;
+ u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
+ u8 mac[ETH_ALEN];
+ int i = 0;
+
+ if (memcmp(ssid_bssid->bssid, zero_mac, sizeof(zero_mac))) {
+ i = mwifiex_find_bssid_in_list(priv,
+ (u8 *) ssid_bssid->bssid,
+ priv->bss_mode);
+ if (i < 0) {
+ memcpy(mac, ssid_bssid->bssid, sizeof(mac));
+ dev_err(adapter->dev, "cannot find bssid %pM\n", mac);
+ return -1;
+ }
+ bss_desc = &adapter->scan_table[i];
+ memcpy(&ssid_bssid->ssid, &bss_desc->ssid,
+ sizeof(struct mwifiex_802_11_ssid));
+ } else if (ssid_bssid->ssid.ssid_len) {
+ i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid, NULL,
+ priv->bss_mode);
+ if (i < 0) {
+ dev_err(adapter->dev, "cannot find ssid %s\n",
+ ssid_bssid->ssid.ssid);
+ return -1;
+ }
+ bss_desc = &adapter->scan_table[i];
+ memcpy(ssid_bssid->bssid, bss_desc->mac_address, ETH_ALEN);
+ } else {
+ return mwifiex_find_best_network(priv, ssid_bssid);
+ }
+
+ return 0;
+}
+
+/*
+ * IOCTL request handler to change Ad-Hoc channel.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ *
+ * The function follows the following steps to perform the change -
+ * - Get current IBSS information
+ * - Get current channel
+ * - If no change is required, return
+ * - If not connected, change channel and return
+ * - If connected,
+ * - Disconnect
+ * - Change channel
+ * - Perform specific SSID scan with same SSID
+ * - Start/Join the IBSS
+ */
+int
+mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel)
+{
+ int ret;
+ struct mwifiex_bss_info bss_info;
+ struct mwifiex_ssid_bssid ssid_bssid;
+ u16 curr_chan = 0;
+
+ memset(&bss_info, 0, sizeof(bss_info));
+
+ /* Get BSS information */
+ if (mwifiex_get_bss_info(priv, &bss_info))
+ return -1;
+
+ /* Get current channel */
+ ret = mwifiex_bss_ioctl_ibss_channel(priv, HostCmd_ACT_GEN_GET,
+ &curr_chan);
+
+ if (curr_chan == channel) {
+ ret = 0;
+ goto done;
+ }
+ dev_dbg(priv->adapter->dev, "cmd: updating channel from %d to %d\n",
+ curr_chan, channel);
+
+ if (!bss_info.media_connected) {
+ ret = 0;
+ goto done;
+ }
+
+ /* Do disonnect */
+ memset(&ssid_bssid, 0, ETH_ALEN);
+ ret = mwifiex_deauthenticate(priv, ssid_bssid.bssid);
+
+ ret = mwifiex_bss_ioctl_ibss_channel(priv, HostCmd_ACT_GEN_SET,
+ (u16 *) &channel);
+
+ /* Do specific SSID scanning */
+ if (mwifiex_request_scan(priv, &bss_info.ssid)) {
+ ret = -1;
+ goto done;
+ }
+ /* Start/Join Adhoc network */
+ memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));
+ memcpy(&ssid_bssid.ssid, &bss_info.ssid,
+ sizeof(struct mwifiex_802_11_ssid));
+
+ ret = mwifiex_bss_start(priv, &ssid_bssid);
+done:
+ return ret;
+}
+
+/*
+ * IOCTL request handler to get rate.
+ *
+ * This function prepares the correct firmware command and
+ * issues it to get the current rate if it is connected,
+ * otherwise, the function returns the lowest supported rate
+ * for the band.
+ */
+static int mwifiex_rate_ioctl_get_rate_value(struct mwifiex_private *priv,
+ struct mwifiex_rate_cfg *rate_cfg)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ rate_cfg->is_rate_auto = priv->is_data_rate_auto;
+ if (!priv->media_connected) {
+ switch (adapter->config_bands) {
+ case BAND_B:
+ /* Return the lowest supported rate for B band */
+ rate_cfg->rate = supported_rates_b[0] & 0x7f;
+ break;
+ case BAND_G:
+ case BAND_G | BAND_GN:
+ /* Return the lowest supported rate for G band */
+ rate_cfg->rate = supported_rates_g[0] & 0x7f;
+ break;
+ case BAND_B | BAND_G:
+ case BAND_A | BAND_B | BAND_G:
+ case BAND_A | BAND_B:
+ case BAND_A | BAND_B | BAND_G | BAND_AN | BAND_GN:
+ case BAND_B | BAND_G | BAND_GN:
+ /* Return the lowest supported rate for BG band */
+ rate_cfg->rate = supported_rates_bg[0] & 0x7f;
+ break;
+ case BAND_A:
+ case BAND_A | BAND_G:
+ case BAND_A | BAND_G | BAND_AN | BAND_GN:
+ case BAND_A | BAND_AN:
+ /* Return the lowest supported rate for A band */
+ rate_cfg->rate = supported_rates_a[0] & 0x7f;
+ break;
+ case BAND_GN:
+ /* Return the lowest supported rate for N band */
+ rate_cfg->rate = supported_rates_n[0] & 0x7f;
+ break;
+ default:
+ dev_warn(adapter->dev, "invalid band %#x\n",
+ adapter->config_bands);
+ break;
+ }
+ } else {
+ return mwifiex_send_cmd_sync(priv,
+ HostCmd_CMD_802_11_TX_RATE_QUERY,
+ HostCmd_ACT_GEN_GET, 0, NULL);
+ }
+
+ return 0;
+}
+
+/*
+ * IOCTL request handler to set rate.
+ *
+ * This function prepares the correct firmware command and
+ * issues it to set the current rate.
+ *
+ * The function also performs validation checking on the supplied value.
+ */
+static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
+ struct mwifiex_rate_cfg *rate_cfg)
+{
+ u8 rates[MWIFIEX_SUPPORTED_RATES];
+ u8 *rate;
+ int rate_index, ret;
+ u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
+ u32 i;
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ if (rate_cfg->is_rate_auto) {
+ memset(bitmap_rates, 0, sizeof(bitmap_rates));
+ /* Support all HR/DSSS rates */
+ bitmap_rates[0] = 0x000F;
+ /* Support all OFDM rates */
+ bitmap_rates[1] = 0x00FF;
+ /* Support all HT-MCSs rate */
+ for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates) - 3; i++)
+ bitmap_rates[i + 2] = 0xFFFF;
+ bitmap_rates[9] = 0x3FFF;
+ } else {
+ memset(rates, 0, sizeof(rates));
+ mwifiex_get_active_data_rates(priv, rates);
+ rate = rates;
+ for (i = 0; (rate[i] && i < MWIFIEX_SUPPORTED_RATES); i++) {
+ dev_dbg(adapter->dev, "info: rate=%#x wanted=%#x\n",
+ rate[i], rate_cfg->rate);
+ if ((rate[i] & 0x7f) == (rate_cfg->rate & 0x7f))
+ break;
+ }
+ if (!rate[i] || (i == MWIFIEX_SUPPORTED_RATES)) {
+ dev_err(adapter->dev, "fixed data rate %#x is out "
+ "of range\n", rate_cfg->rate);
+ return -1;
+ }
+ memset(bitmap_rates, 0, sizeof(bitmap_rates));
+
+ rate_index = mwifiex_data_rate_to_index(rate_cfg->rate);
+
+ /* Only allow b/g rates to be set */
+ if (rate_index >= MWIFIEX_RATE_INDEX_HRDSSS0 &&
+ rate_index <= MWIFIEX_RATE_INDEX_HRDSSS3) {
+ bitmap_rates[0] = 1 << rate_index;
+ } else {
+ rate_index -= 1; /* There is a 0x00 in the table */
+ if (rate_index >= MWIFIEX_RATE_INDEX_OFDM0 &&
+ rate_index <= MWIFIEX_RATE_INDEX_OFDM7)
+ bitmap_rates[1] = 1 << (rate_index -
+ MWIFIEX_RATE_INDEX_OFDM0);
+ }
+ }
+
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
+ HostCmd_ACT_GEN_SET, 0, bitmap_rates);
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set/get rate.
+ *
+ * This function can be used to set/get either the rate value or the
+ * rate index.
+ */
+static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
+ struct mwifiex_rate_cfg *rate_cfg)
+{
+ int status;
+
+ if (!rate_cfg)
+ return -1;
+
+ if (rate_cfg->action == HostCmd_ACT_GEN_GET)
+ status = mwifiex_rate_ioctl_get_rate_value(priv, rate_cfg);
+ else
+ status = mwifiex_rate_ioctl_set_rate_value(priv, rate_cfg);
+
+ return status;
+}
+
+/*
+ * Sends IOCTL request to get the data rate.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
+ struct mwifiex_rate_cfg *rate)
+{
+ int ret;
+
+ memset(rate, 0, sizeof(struct mwifiex_rate_cfg));
+ rate->action = HostCmd_ACT_GEN_GET;
+ ret = mwifiex_rate_ioctl_cfg(priv, rate);
+
+ if (!ret) {
+ if (rate && rate->is_rate_auto)
+ rate->rate = mwifiex_index_to_data_rate(priv->tx_rate,
+ priv->tx_htinfo);
+ else if (rate)
+ rate->rate = priv->data_rate;
+ } else {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set tx power configuration.
+ *
+ * This function prepares the correct firmware command and
+ * issues it.
+ *
+ * For non-auto power mode, all the following power groups are set -
+ * - Modulation class HR/DSSS
+ * - Modulation class OFDM
+ * - Modulation class HTBW20
+ * - Modulation class HTBW40
+ */
+int mwifiex_set_tx_power(struct mwifiex_private *priv,
+ struct mwifiex_power_cfg *power_cfg)
+{
+ int ret;
+ struct host_cmd_ds_txpwr_cfg *txp_cfg;
+ struct mwifiex_types_power_group *pg_tlv;
+ struct mwifiex_power_group *pg;
+ u8 *buf;
+ u16 dbm = 0;
+
+ if (!power_cfg->is_power_auto) {
+ dbm = (u16) power_cfg->power_level;
+ if ((dbm < priv->min_tx_power_level) ||
+ (dbm > priv->max_tx_power_level)) {
+ dev_err(priv->adapter->dev, "txpower value %d dBm"
+ " is out of range (%d dBm-%d dBm)\n",
+ dbm, priv->min_tx_power_level,
+ priv->max_tx_power_level);
+ return -1;
+ }
+ }
+ buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
+ if (!buf) {
+ dev_err(priv->adapter->dev, "%s: failed to alloc cmd buffer\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
+ txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
+ if (!power_cfg->is_power_auto) {
+ txp_cfg->mode = cpu_to_le32(1);
+ pg_tlv = (struct mwifiex_types_power_group *) (buf +
+ sizeof(struct host_cmd_ds_txpwr_cfg));
+ pg_tlv->type = TLV_TYPE_POWER_GROUP;
+ pg_tlv->length = 4 * sizeof(struct mwifiex_power_group);
+ pg = (struct mwifiex_power_group *) (buf +
+ sizeof(struct host_cmd_ds_txpwr_cfg) +
+ sizeof(struct mwifiex_types_power_group));
+ /* Power group for modulation class HR/DSSS */
+ pg->first_rate_code = 0x00;
+ pg->last_rate_code = 0x03;
+ pg->modulation_class = MOD_CLASS_HR_DSSS;
+ pg->power_step = 0;
+ pg->power_min = (s8) dbm;
+ pg->power_max = (s8) dbm;
+ pg++;
+ /* Power group for modulation class OFDM */
+ pg->first_rate_code = 0x00;
+ pg->last_rate_code = 0x07;
+ pg->modulation_class = MOD_CLASS_OFDM;
+ pg->power_step = 0;
+ pg->power_min = (s8) dbm;
+ pg->power_max = (s8) dbm;
+ pg++;
+ /* Power group for modulation class HTBW20 */
+ pg->first_rate_code = 0x00;
+ pg->last_rate_code = 0x20;
+ pg->modulation_class = MOD_CLASS_HT;
+ pg->power_step = 0;
+ pg->power_min = (s8) dbm;
+ pg->power_max = (s8) dbm;
+ pg->ht_bandwidth = HT_BW_20;
+ pg++;
+ /* Power group for modulation class HTBW40 */
+ pg->first_rate_code = 0x00;
+ pg->last_rate_code = 0x20;
+ pg->modulation_class = MOD_CLASS_HT;
+ pg->power_step = 0;
+ pg->power_min = (s8) dbm;
+ pg->power_max = (s8) dbm;
+ pg->ht_bandwidth = HT_BW_40;
+ }
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TXPWR_CFG,
+ HostCmd_ACT_GEN_SET, 0, buf);
+
+ kfree(buf);
+ return ret;
+}
+
+/*
+ * IOCTL request handler to get power save mode.
+ *
+ * This function prepares the correct firmware command and
+ * issues it.
+ */
+int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
+{
+ int ret;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u16 sub_cmd;
+
+ if (*ps_mode)
+ adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
+ else
+ adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
+ sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
+ sub_cmd, BITMAP_STA_PS, NULL);
+ if ((!ret) && (sub_cmd == DIS_AUTO_PS))
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_PS_MODE_ENH, GET_PS,
+ 0, NULL);
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set/reset WPA IE.
+ *
+ * The supplied WPA IE is treated as a opaque buffer. Only the first field
+ * is checked to determine WPA version. If buffer length is zero, the existing
+ * WPA IE is reset.
+ */
+static int mwifiex_set_wpa_ie_helper(struct mwifiex_private *priv,
+ u8 *ie_data_ptr, u16 ie_len)
+{
+ if (ie_len) {
+ if (ie_len > sizeof(priv->wpa_ie)) {
+ dev_err(priv->adapter->dev,
+ "failed to copy WPA IE, too big\n");
+ return -1;
+ }
+ memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
+ priv->wpa_ie_len = (u8) ie_len;
+ dev_dbg(priv->adapter->dev, "cmd: Set Wpa_ie_len=%d IE=%#x\n",
+ priv->wpa_ie_len, priv->wpa_ie[0]);
+
+ if (priv->wpa_ie[0] == WLAN_EID_WPA) {
+ priv->sec_info.wpa_enabled = true;
+ } else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
+ priv->sec_info.wpa2_enabled = true;
+ } else {
+ priv->sec_info.wpa_enabled = false;
+ priv->sec_info.wpa2_enabled = false;
+ }
+ } else {
+ memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
+ priv->wpa_ie_len = 0;
+ dev_dbg(priv->adapter->dev, "info: reset wpa_ie_len=%d IE=%#x\n",
+ priv->wpa_ie_len, priv->wpa_ie[0]);
+ priv->sec_info.wpa_enabled = false;
+ priv->sec_info.wpa2_enabled = false;
+ }
+
+ return 0;
+}
+
+/*
+ * IOCTL request handler to set/reset WAPI IE.
+ *
+ * The supplied WAPI IE is treated as a opaque buffer. Only the first field
+ * is checked to internally enable WAPI. If buffer length is zero, the existing
+ * WAPI IE is reset.
+ */
+static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
+ u8 *ie_data_ptr, u16 ie_len)
+{
+ if (ie_len) {
+ if (ie_len > sizeof(priv->wapi_ie)) {
+ dev_dbg(priv->adapter->dev,
+ "info: failed to copy WAPI IE, too big\n");
+ return -1;
+ }
+ memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
+ priv->wapi_ie_len = ie_len;
+ dev_dbg(priv->adapter->dev, "cmd: Set wapi_ie_len=%d IE=%#x\n",
+ priv->wapi_ie_len, priv->wapi_ie[0]);
+
+ if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
+ priv->sec_info.wapi_enabled = true;
+ } else {
+ memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
+ priv->wapi_ie_len = ie_len;
+ dev_dbg(priv->adapter->dev,
+ "info: Reset wapi_ie_len=%d IE=%#x\n",
+ priv->wapi_ie_len, priv->wapi_ie[0]);
+ priv->sec_info.wapi_enabled = false;
+ }
+ return 0;
+}
+
+/*
+ * IOCTL request handler to set WAPI key.
+ *
+ * This function prepares the correct firmware command and
+ * issues it.
+ */
+static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
+ struct mwifiex_ds_encrypt_key *encrypt_key)
+{
+
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
+ HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
+ encrypt_key);
+}
+
+/*
+ * IOCTL request handler to set WEP network key.
+ *
+ * This function prepares the correct firmware command and
+ * issues it, after validation checks.
+ */
+static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
+ struct mwifiex_ds_encrypt_key *encrypt_key)
+{
+ int ret;
+ struct mwifiex_wep_key *wep_key;
+ int index;
+
+ if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
+ priv->wep_key_curr_index = 0;
+ wep_key = &priv->wep_key[priv->wep_key_curr_index];
+ index = encrypt_key->key_index;
+ if (encrypt_key->key_disable) {
+ priv->sec_info.wep_status = MWIFIEX_802_11_WEP_DISABLED;
+ } else if (!encrypt_key->key_len) {
+ /* Copy the required key as the current key */
+ wep_key = &priv->wep_key[index];
+ if (!wep_key->key_length) {
+ dev_err(priv->adapter->dev,
+ "key not set, so cannot enable it\n");
+ return -1;
+ }
+ priv->wep_key_curr_index = (u16) index;
+ priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED;
+ } else {
+ wep_key = &priv->wep_key[index];
+ memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
+ /* Copy the key in the driver */
+ memcpy(wep_key->key_material,
+ encrypt_key->key_material,
+ encrypt_key->key_len);
+ wep_key->key_index = index;
+ wep_key->key_length = encrypt_key->key_len;
+ priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED;
+ }
+ if (wep_key->key_length) {
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_KEY_MATERIAL,
+ HostCmd_ACT_GEN_SET, 0, NULL);
+ if (ret)
+ return ret;
+ }
+ if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
+ priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
+ else
+ priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
+
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
+ HostCmd_ACT_GEN_SET, 0,
+ &priv->curr_pkt_filter);
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set WPA key.
+ *
+ * This function prepares the correct firmware command and
+ * issues it, after validation checks.
+ *
+ * Current driver only supports key length of up to 32 bytes.
+ *
+ * This function can also be used to disable a currently set key.
+ */
+static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
+ struct mwifiex_ds_encrypt_key *encrypt_key)
+{
+ int ret;
+ u8 remove_key = false;
+ struct host_cmd_ds_802_11_key_material *ibss_key;
+
+ /* Current driver only supports key length of up to 32 bytes */
+ if (encrypt_key->key_len > WLAN_MAX_KEY_LEN) {
+ dev_err(priv->adapter->dev, "key length too long\n");
+ return -1;
+ }
+
+ if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
+ /*
+ * IBSS/WPA-None uses only one key (Group) for both receiving
+ * and sending unicast and multicast packets.
+ */
+ /* Send the key as PTK to firmware */
+ encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_802_11_KEY_MATERIAL,
+ HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
+ encrypt_key);
+ if (ret)
+ return ret;
+
+ ibss_key = &priv->aes_key;
+ memset(ibss_key, 0,
+ sizeof(struct host_cmd_ds_802_11_key_material));
+ /* Copy the key in the driver */
+ memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
+ encrypt_key->key_len);
+ memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
+ sizeof(ibss_key->key_param_set.key_len));
+ ibss_key->key_param_set.key_type_id
+ = cpu_to_le16(KEY_TYPE_ID_TKIP);
+ ibss_key->key_param_set.key_info = cpu_to_le16(KEY_ENABLED);
+
+ /* Send the key as GTK to firmware */
+ encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
+ }
+
+ if (!encrypt_key->key_index)
+ encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
+
+ if (remove_key)
+ ret = mwifiex_send_cmd_sync(priv,
+ HostCmd_CMD_802_11_KEY_MATERIAL,
+ HostCmd_ACT_GEN_SET, !(KEY_INFO_ENABLED),
+ encrypt_key);
+ else
+ ret = mwifiex_send_cmd_sync(priv,
+ HostCmd_CMD_802_11_KEY_MATERIAL,
+ HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
+ encrypt_key);
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set/get network keys.
+ *
+ * This is a generic key handling function which supports WEP, WPA
+ * and WAPI.
+ */
+static int
+mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
+ struct mwifiex_ds_encrypt_key *encrypt_key)
+{
+ int status;
+
+ if (encrypt_key->is_wapi_key)
+ status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
+ else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
+ status = mwifiex_sec_ioctl_set_wpa_key(priv, encrypt_key);
+ else
+ status = mwifiex_sec_ioctl_set_wep_key(priv, encrypt_key);
+ return status;
+}
+
+/*
+ * This function returns the driver version.
+ */
+int
+mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
+ int max_len)
+{
+ union {
+ u32 l;
+ u8 c[4];
+ } ver;
+ char fw_ver[32];
+
+ ver.l = adapter->fw_release_number;
+ sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);
+
+ snprintf(version, max_len, driver_version, fw_ver);
+
+ dev_dbg(adapter->dev, "info: MWIFIEX VERSION: %s\n", version);
+
+ return 0;
+}
+
+/*
+ * Sends IOCTL request to get signal information.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int mwifiex_get_signal_info(struct mwifiex_private *priv,
+ struct mwifiex_ds_get_signal *signal)
+{
+ int status;
+
+ signal->selector = ALL_RSSI_INFO_MASK;
+
+ /* Signal info can be obtained only if connected */
+ if (!priv->media_connected) {
+ dev_dbg(priv->adapter->dev,
+ "info: Can not get signal in disconnected state\n");
+ return -1;
+ }
+
+ status = mwifiex_send_cmd_sync(priv, HostCmd_CMD_RSSI_INFO,
+ HostCmd_ACT_GEN_GET, 0, signal);
+
+ if (!status) {
+ if (signal->selector & BCN_RSSI_AVG_MASK)
+ priv->w_stats.qual.level = signal->bcn_rssi_avg;
+ if (signal->selector & BCN_NF_AVG_MASK)
+ priv->w_stats.qual.noise = signal->bcn_nf_avg;
+ }
+
+ return status;
+}
+
+/*
+ * Sends IOCTL request to set encoding parameters.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int mwifiex_set_encode(struct mwifiex_private *priv, const u8 *key,
+ int key_len, u8 key_index, int disable)
+{
+ struct mwifiex_ds_encrypt_key encrypt_key;
+
+ memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key));
+ encrypt_key.key_len = key_len;
+ if (!disable) {
+ encrypt_key.key_index = key_index;
+ if (key_len)
+ memcpy(encrypt_key.key_material, key, key_len);
+ } else {
+ encrypt_key.key_disable = true;
+ }
+
+ return mwifiex_sec_ioctl_encrypt_key(priv, &encrypt_key);
+}
+
+/*
+ * Sends IOCTL request to get extended version.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int
+mwifiex_get_ver_ext(struct mwifiex_private *priv)
+{
+ struct mwifiex_ver_ext ver_ext;
+
+ memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext));
+ if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_VERSION_EXT,
+ HostCmd_ACT_GEN_GET, 0, &ver_ext))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Sends IOCTL request to get statistics information.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int
+mwifiex_get_stats_info(struct mwifiex_private *priv,
+ struct mwifiex_ds_get_stats *log)
+{
+ int ret;
+
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_GET_LOG,
+ HostCmd_ACT_GEN_GET, 0, log);
+
+ if (!ret) {
+ priv->w_stats.discard.fragment = log->fcs_error;
+ priv->w_stats.discard.retries = log->retry;
+ priv->w_stats.discard.misc = log->ack_failure;
+ }
+
+ return ret;
+}
+
+/*
+ * IOCTL request handler to read/write register.
+ *
+ * This function prepares the correct firmware command and
+ * issues it.
+ *
+ * Access to the following registers are supported -
+ * - MAC
+ * - BBP
+ * - RF
+ * - PMIC
+ * - CAU
+ */
+static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
+ struct mwifiex_ds_reg_rw *reg_rw,
+ u16 action)
+{
+ u16 cmd_no;
+
+ switch (le32_to_cpu(reg_rw->type)) {
+ case MWIFIEX_REG_MAC:
+ cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
+ break;
+ case MWIFIEX_REG_BBP:
+ cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
+ break;
+ case MWIFIEX_REG_RF:
+ cmd_no = HostCmd_CMD_RF_REG_ACCESS;
+ break;
+ case MWIFIEX_REG_PMIC:
+ cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
+ break;
+ case MWIFIEX_REG_CAU:
+ cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
+ break;
+ default:
+ return -1;
+ }
+
+ return mwifiex_send_cmd_sync(priv, cmd_no, action, 0, reg_rw);
+
+}
+
+/*
+ * Sends IOCTL request to write to a register.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int
+mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
+ u32 reg_offset, u32 reg_value)
+{
+ struct mwifiex_ds_reg_rw reg_rw;
+
+ reg_rw.type = cpu_to_le32(reg_type);
+ reg_rw.offset = cpu_to_le32(reg_offset);
+ reg_rw.value = cpu_to_le32(reg_value);
+
+ return mwifiex_reg_mem_ioctl_reg_rw(priv, ®_rw, HostCmd_ACT_GEN_SET);
+}
+
+/*
+ * Sends IOCTL request to read from a register.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int
+mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
+ u32 reg_offset, u32 *value)
+{
+ int ret;
+ struct mwifiex_ds_reg_rw reg_rw;
+
+ reg_rw.type = cpu_to_le32(reg_type);
+ reg_rw.offset = cpu_to_le32(reg_offset);
+ ret = mwifiex_reg_mem_ioctl_reg_rw(priv, ®_rw, HostCmd_ACT_GEN_GET);
+
+ if (ret)
+ goto done;
+
+ *value = le32_to_cpu(reg_rw.value);
+
+done:
+ return ret;
+}
+
+/*
+ * Sends IOCTL request to read from EEPROM.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int
+mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
+ u8 *value)
+{
+ int ret;
+ struct mwifiex_ds_read_eeprom rd_eeprom;
+
+ rd_eeprom.offset = cpu_to_le16((u16) offset);
+ rd_eeprom.byte_count = cpu_to_le16((u16) bytes);
+
+ /* Send request to firmware */
+ ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
+ HostCmd_ACT_GEN_GET, 0, &rd_eeprom);
+
+ if (!ret)
+ memcpy(value, rd_eeprom.value, MAX_EEPROM_DATA);
+ return ret;
+}
+
+/*
+ * This function sets a generic IE. In addition to generic IE, it can
+ * also handle WPA, WPA2 and WAPI IEs.
+ */
+static int
+mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
+ u16 ie_len)
+{
+ int ret = 0;
+ struct ieee_types_vendor_header *pvendor_ie;
+ const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
+ const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };
+
+ /* If the passed length is zero, reset the buffer */
+ if (!ie_len) {
+ priv->gen_ie_buf_len = 0;
+ priv->wps.session_enable = false;
+
+ return 0;
+ } else if (!ie_data_ptr) {
+ return -1;
+ }
+ pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
+ /* Test to see if it is a WPA IE, if not, then it is a gen IE */
+ if (((pvendor_ie->element_id == WLAN_EID_WPA)
+ && (!memcmp(pvendor_ie->oui, wpa_oui, sizeof(wpa_oui))))
+ || (pvendor_ie->element_id == WLAN_EID_RSN)) {
+
+ /* IE is a WPA/WPA2 IE so call set_wpa function */
+ ret = mwifiex_set_wpa_ie_helper(priv, ie_data_ptr, ie_len);
+ priv->wps.session_enable = false;
+
+ return ret;
+ } else if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
+ /* IE is a WAPI IE so call set_wapi function */
+ ret = mwifiex_set_wapi_ie(priv, ie_data_ptr, ie_len);
+
+ return ret;
+ }
+ /*
+ * Verify that the passed length is not larger than the
+ * available space remaining in the buffer
+ */
+ if (ie_len < (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {
+
+ /* Test to see if it is a WPS IE, if so, enable
+ * wps session flag
+ */
+ pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
+ if ((pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC)
+ && (!memcmp(pvendor_ie->oui, wps_oui,
+ sizeof(wps_oui)))) {
+ priv->wps.session_enable = true;
+ dev_dbg(priv->adapter->dev,
+ "info: WPS Session Enabled.\n");
+ }
+
+ /* Append the passed data to the end of the
+ genIeBuffer */
+ memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len, ie_data_ptr,
+ ie_len);
+ /* Increment the stored buffer length by the
+ size passed */
+ priv->gen_ie_buf_len += ie_len;
+ } else {
+ /* Passed data does not fit in the remaining
+ buffer space */
+ ret = -1;
+ }
+
+ /* Return 0, or -1 for error case */
+ return ret;
+}
+
+/*
+ * IOCTL request handler to set/get generic IE.
+ *
+ * In addition to various generic IEs, this function can also be
+ * used to set the ARP filter.
+ */
+static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
+ struct mwifiex_ds_misc_gen_ie *gen_ie,
+ u16 action)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ switch (gen_ie->type) {
+ case MWIFIEX_IE_TYPE_GEN_IE:
+ if (action == HostCmd_ACT_GEN_GET) {
+ gen_ie->len = priv->wpa_ie_len;
+ memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
+ } else {
+ mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
+ (u16) gen_ie->len);
+ }
+ break;
+ case MWIFIEX_IE_TYPE_ARP_FILTER:
+ memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
+ if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
+ adapter->arp_filter_size = 0;
+ dev_err(adapter->dev, "invalid ARP filter size\n");
+ return -1;
+ } else {
+ memcpy(adapter->arp_filter, gen_ie->ie_data,
+ gen_ie->len);
+ adapter->arp_filter_size = gen_ie->len;
+ }
+ break;
+ default:
+ dev_err(adapter->dev, "invalid IE type\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Sends IOCTL request to set a generic IE.
+ *
+ * This function allocates the IOCTL request buffer, fills it
+ * with requisite parameters and calls the IOCTL handler.
+ */
+int
+mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len)
+{
+ struct mwifiex_ds_misc_gen_ie gen_ie;
+
+ if (ie_len > IW_CUSTOM_MAX)
+ return -EFAULT;
+
+ gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
+ gen_ie.len = ie_len;
+ memcpy(gen_ie.ie_data, ie, ie_len);
+ if (mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET))
+ return -EFAULT;
+
+ return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c
new file mode 100644
index 0000000..1fdddec
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sta_rx.c
@@ -0,0 +1,200 @@
+/*
+ * Marvell Wireless LAN device driver: station RX data handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "11n_aggr.h"
+#include "11n_rxreorder.h"
+
+/*
+ * This function processes the received packet and forwards it
+ * to kernel/upper layer.
+ *
+ * This function parses through the received packet and determines
+ * if it is a debug packet or normal packet.
+ *
+ * For non-debug packets, the function chops off unnecessary leading
+ * header bytes, reconstructs the packet as an ethernet frame or
+ * 802.2/llc/snap frame as required, and sends it to kernel/upper layer.
+ *
+ * The completion callback is called after processing in complete.
+ */
+int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb)
+{
+ int ret;
+ struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
+ struct mwifiex_private *priv = adapter->priv[rx_info->bss_index];
+ struct rx_packet_hdr *rx_pkt_hdr;
+ struct rxpd *local_rx_pd;
+ int hdr_chop;
+ struct ethhdr *eth_hdr;
+ u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+
+ local_rx_pd = (struct rxpd *) (skb->data);
+
+ rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd +
+ local_rx_pd->rx_pkt_offset);
+
+ if (!memcmp(&rx_pkt_hdr->rfc1042_hdr,
+ rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr))) {
+ /*
+ * Replace the 803 header and rfc1042 header (llc/snap) with an
+ * EthernetII header, keep the src/dst and snap_type
+ * (ethertype).
+ * The firmware only passes up SNAP frames converting
+ * all RX Data from 802.11 to 802.2/LLC/SNAP frames.
+ * To create the Ethernet II, just move the src, dst address
+ * right before the snap_type.
+ */
+ eth_hdr = (struct ethhdr *)
+ ((u8 *) &rx_pkt_hdr->eth803_hdr
+ + sizeof(rx_pkt_hdr->eth803_hdr) +
+ sizeof(rx_pkt_hdr->rfc1042_hdr)
+ - sizeof(rx_pkt_hdr->eth803_hdr.h_dest)
+ - sizeof(rx_pkt_hdr->eth803_hdr.h_source)
+ - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type));
+
+ memcpy(eth_hdr->h_source, rx_pkt_hdr->eth803_hdr.h_source,
+ sizeof(eth_hdr->h_source));
+ memcpy(eth_hdr->h_dest, rx_pkt_hdr->eth803_hdr.h_dest,
+ sizeof(eth_hdr->h_dest));
+
+ /* Chop off the rxpd + the excess memory from the 802.2/llc/snap
+ header that was removed. */
+ hdr_chop = (u8 *) eth_hdr - (u8 *) local_rx_pd;
+ } else {
+ /* Chop off the rxpd */
+ hdr_chop = (u8 *) &rx_pkt_hdr->eth803_hdr -
+ (u8 *) local_rx_pd;
+ }
+
+ /* Chop off the leading header bytes so the it points to the start of
+ either the reconstructed EthII frame or the 802.2/llc/snap frame */
+ skb_pull(skb, hdr_chop);
+
+ priv->rxpd_rate = local_rx_pd->rx_rate;
+
+ priv->rxpd_htinfo = local_rx_pd->ht_info;
+
+ ret = mwifiex_recv_packet(adapter, skb);
+ if (ret == -1)
+ dev_err(adapter->dev, "recv packet failed\n");
+
+ return ret;
+}
+
+/*
+ * This function processes the received buffer.
+ *
+ * The function looks into the RxPD and performs sanity tests on the
+ * received buffer to ensure its a valid packet, before processing it
+ * further. If the packet is determined to be aggregated, it is
+ * de-aggregated accordingly. Non-unicast packets are sent directly to
+ * the kernel/upper layers. Unicast packets are handed over to the
+ * Rx reordering routine if 11n is enabled.
+ *
+ * The completion callback is called after processing in complete.
+ */
+int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb)
+{
+ int ret = 0;
+ struct rxpd *local_rx_pd;
+ struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
+ struct rx_packet_hdr *rx_pkt_hdr;
+ u8 ta[ETH_ALEN];
+ u16 rx_pkt_type;
+ struct mwifiex_private *priv = adapter->priv[rx_info->bss_index];
+
+ local_rx_pd = (struct rxpd *) (skb->data);
+ rx_pkt_type = local_rx_pd->rx_pkt_type;
+
+ rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd +
+ local_rx_pd->rx_pkt_offset);
+
+ if ((local_rx_pd->rx_pkt_offset + local_rx_pd->rx_pkt_length) >
+ (u16) skb->len) {
+ dev_err(adapter->dev, "wrong rx packet: len=%d,"
+ " rx_pkt_offset=%d, rx_pkt_length=%d\n", skb->len,
+ local_rx_pd->rx_pkt_offset, local_rx_pd->rx_pkt_length);
+ priv->stats.rx_dropped++;
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ if (local_rx_pd->rx_pkt_type == PKT_TYPE_AMSDU) {
+ struct sk_buff_head list;
+ struct sk_buff *rx_skb;
+
+ __skb_queue_head_init(&list);
+
+ skb_pull(skb, local_rx_pd->rx_pkt_offset);
+ skb_trim(skb, local_rx_pd->rx_pkt_length);
+
+ ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr,
+ priv->wdev->iftype, 0, false);
+
+ while (!skb_queue_empty(&list)) {
+ rx_skb = __skb_dequeue(&list);
+ ret = mwifiex_recv_packet(adapter, rx_skb);
+ if (ret == -1)
+ dev_err(adapter->dev, "Rx of A-MSDU failed");
+ }
+ return 0;
+ }
+
+ /*
+ * If the packet is not an unicast packet then send the packet
+ * directly to os. Don't pass thru rx reordering
+ */
+ if (!IS_11N_ENABLED(priv) ||
+ memcmp(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest, ETH_ALEN)) {
+ mwifiex_process_rx_packet(adapter, skb);
+ return ret;
+ }
+
+ if (mwifiex_queuing_ra_based(priv)) {
+ memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN);
+ } else {
+ if (rx_pkt_type != PKT_TYPE_BAR)
+ priv->rx_seq[local_rx_pd->priority] =
+ local_rx_pd->seq_num;
+ memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address,
+ ETH_ALEN);
+ }
+
+ /* Reorder and send to OS */
+ ret = mwifiex_11n_rx_reorder_pkt(priv, local_rx_pd->seq_num,
+ local_rx_pd->priority, ta,
+ (u8) local_rx_pd->rx_pkt_type,
+ (void *) skb);
+
+ if (ret || (rx_pkt_type == PKT_TYPE_BAR)) {
+ if (priv && (ret == -1))
+ priv->stats.rx_dropped++;
+
+ dev_kfree_skb_any(skb);
+ }
+
+ return ret;
+}
diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c
new file mode 100644
index 0000000..fa6221b
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sta_tx.c
@@ -0,0 +1,198 @@
+/*
+ * Marvell Wireless LAN device driver: station TX data handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+
+/*
+ * This function fills the TxPD for tx packets.
+ *
+ * The Tx buffer received by this function should already have the
+ * header space allocated for TxPD.
+ *
+ * This function inserts the TxPD in between interface header and actual
+ * data and adjusts the buffer pointers accordingly.
+ *
+ * The following TxPD fields are set by this function, as required -
+ * - BSS number
+ * - Tx packet length and offset
+ * - Priority
+ * - Packet delay
+ * - Priority specific Tx control
+ * - Flags
+ */
+void *mwifiex_process_sta_txpd(struct mwifiex_private *priv,
+ struct sk_buff *skb)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct txpd *local_tx_pd;
+ struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb);
+
+ if (!skb->len) {
+ dev_err(adapter->dev, "Tx: bad packet length: %d\n",
+ skb->len);
+ tx_info->status_code = -1;
+ return skb->data;
+ }
+
+ BUG_ON(skb_headroom(skb) < (sizeof(*local_tx_pd) + INTF_HEADER_LEN));
+ skb_push(skb, sizeof(*local_tx_pd));
+
+ local_tx_pd = (struct txpd *) skb->data;
+ memset(local_tx_pd, 0, sizeof(struct txpd));
+ local_tx_pd->bss_num = priv->bss_num;
+ local_tx_pd->bss_type = priv->bss_type;
+ local_tx_pd->tx_pkt_length = cpu_to_le16((u16) (skb->len -
+ sizeof(struct txpd)));
+
+ local_tx_pd->priority = (u8) skb->priority;
+ local_tx_pd->pkt_delay_2ms =
+ mwifiex_wmm_compute_drv_pkt_delay(priv, skb);
+
+ if (local_tx_pd->priority <
+ ARRAY_SIZE(priv->wmm.user_pri_pkt_tx_ctrl))
+ /*
+ * Set the priority specific tx_control field, setting of 0 will
+ * cause the default value to be used later in this function
+ */
+ local_tx_pd->tx_control =
+ cpu_to_le32(priv->wmm.user_pri_pkt_tx_ctrl[local_tx_pd->
+ priority]);
+
+ if (adapter->pps_uapsd_mode) {
+ if (mwifiex_check_last_packet_indication(priv)) {
+ adapter->tx_lock_flag = true;
+ local_tx_pd->flags =
+ MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET;
+ }
+ }
+
+ /* Offset of actual data */
+ local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd));
+
+ /* make space for INTF_HEADER_LEN */
+ skb_push(skb, INTF_HEADER_LEN);
+
+ if (!local_tx_pd->tx_control)
+ /* TxCtrl set by user or default */
+ local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
+
+ return skb->data;
+}
+
+/*
+ * This function tells firmware to send a NULL data packet.
+ *
+ * The function creates a NULL data packet with TxPD and sends to the
+ * firmware for transmission, with highest priority setting.
+ */
+int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct txpd *local_tx_pd;
+/* sizeof(struct txpd) + Interface specific header */
+#define NULL_PACKET_HDR 64
+ u32 data_len = NULL_PACKET_HDR;
+ struct sk_buff *skb;
+ int ret;
+ struct mwifiex_txinfo *tx_info = NULL;
+
+ if (adapter->surprise_removed)
+ return -1;
+
+ if (!priv->media_connected)
+ return -1;
+
+ if (adapter->data_sent)
+ return -1;
+
+ skb = dev_alloc_skb(data_len);
+ if (!skb)
+ return -1;
+
+ tx_info = MWIFIEX_SKB_TXCB(skb);
+ tx_info->bss_index = priv->bss_index;
+ skb_reserve(skb, sizeof(struct txpd) + INTF_HEADER_LEN);
+ skb_push(skb, sizeof(struct txpd));
+
+ local_tx_pd = (struct txpd *) skb->data;
+ local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
+ local_tx_pd->flags = flags;
+ local_tx_pd->priority = WMM_HIGHEST_PRIORITY;
+ local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd));
+ local_tx_pd->bss_num = priv->bss_num;
+ local_tx_pd->bss_type = priv->bss_type;
+
+ skb_push(skb, INTF_HEADER_LEN);
+
+ ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA,
+ skb->data, skb->len, NULL);
+ switch (ret) {
+ case -EBUSY:
+ adapter->data_sent = true;
+ /* Fall through FAILURE handling */
+ case -1:
+ dev_kfree_skb_any(skb);
+ dev_err(adapter->dev, "%s: host_to_card failed: ret=%d\n",
+ __func__, ret);
+ adapter->dbg.num_tx_host_to_card_failure++;
+ break;
+ case 0:
+ dev_kfree_skb_any(skb);
+ dev_dbg(adapter->dev, "data: %s: host_to_card succeeded\n",
+ __func__);
+ adapter->tx_lock_flag = true;
+ break;
+ case -EINPROGRESS:
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * This function checks if we need to send last packet indication.
+ */
+u8
+mwifiex_check_last_packet_indication(struct mwifiex_private *priv)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u8 ret = false;
+
+ if (!adapter->sleep_period.period)
+ return ret;
+ if (mwifiex_wmm_lists_empty(adapter))
+ ret = true;
+
+ if (ret && !adapter->cmd_sent && !adapter->curr_cmd
+ && !is_command_pending(adapter)) {
+ adapter->delay_null_pkt = false;
+ ret = true;
+ } else {
+ ret = false;
+ adapter->delay_null_pkt = true;
+ }
+ return ret;
+}
diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c
new file mode 100644
index 0000000..2101208
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/txrx.c
@@ -0,0 +1,200 @@
+/*
+ * Marvell Wireless LAN device driver: generic TX/RX data handling
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+
+/*
+ * This function processes the received buffer.
+ *
+ * Main responsibility of this function is to parse the RxPD to
+ * identify the correct interface this packet is headed for and
+ * forwarding it to the associated handling function, where the
+ * packet will be further processed and sent to kernel/upper layer
+ * if required.
+ */
+int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb)
+{
+ struct mwifiex_private *priv =
+ mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+ struct rxpd *local_rx_pd;
+ struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
+
+ local_rx_pd = (struct rxpd *) (skb->data);
+ /* Get the BSS number from rxpd, get corresponding priv */
+ priv = mwifiex_get_priv_by_id(adapter, local_rx_pd->bss_num &
+ BSS_NUM_MASK, local_rx_pd->bss_type);
+ if (!priv)
+ priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+
+ rx_info->bss_index = priv->bss_index;
+
+ return mwifiex_process_sta_rx_packet(adapter, skb);
+}
+EXPORT_SYMBOL_GPL(mwifiex_handle_rx_packet);
+
+/*
+ * This function sends a packet to device.
+ *
+ * It processes the packet to add the TxPD, checks condition and
+ * sends the processed packet to firmware for transmission.
+ *
+ * On successful completion, the function calls the completion callback
+ * and logs the time.
+ */
+int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb,
+ struct mwifiex_tx_param *tx_param)
+{
+ int ret = -1;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ u8 *head_ptr;
+ struct txpd *local_tx_pd = NULL;
+
+ head_ptr = (u8 *) mwifiex_process_sta_txpd(priv, skb);
+ if (head_ptr) {
+ if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA)
+ local_tx_pd =
+ (struct txpd *) (head_ptr + INTF_HEADER_LEN);
+
+ ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA,
+ skb->data, skb->len, tx_param);
+ }
+
+ switch (ret) {
+ case -EBUSY:
+ if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
+ (adapter->pps_uapsd_mode) &&
+ (adapter->tx_lock_flag)) {
+ priv->adapter->tx_lock_flag = false;
+ local_tx_pd->flags = 0;
+ }
+ dev_dbg(adapter->dev, "data: -EBUSY is returned\n");
+ break;
+ case -1:
+ adapter->data_sent = false;
+ dev_err(adapter->dev, "mwifiex_write_data_async failed: 0x%X\n",
+ ret);
+ adapter->dbg.num_tx_host_to_card_failure++;
+ mwifiex_write_data_complete(adapter, skb, ret);
+ break;
+ case -EINPROGRESS:
+ adapter->data_sent = false;
+ break;
+ case 0:
+ mwifiex_write_data_complete(adapter, skb, ret);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Packet send completion callback handler.
+ *
+ * It either frees the buffer directly or forwards it to another
+ * completion callback which checks conditions, updates statistics,
+ * wakes up stalled traffic queue if required, and then frees the buffer.
+ */
+int mwifiex_write_data_complete(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb, int status)
+{
+ struct mwifiex_private *priv, *tpriv;
+ struct mwifiex_txinfo *tx_info;
+ int i;
+
+ if (!skb)
+ return 0;
+
+ tx_info = MWIFIEX_SKB_TXCB(skb);
+ priv = mwifiex_bss_index_to_priv(adapter, tx_info->bss_index);
+ if (!priv)
+ goto done;
+
+ priv->netdev->trans_start = jiffies;
+ if (!status) {
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += skb->len;
+ } else {
+ priv->stats.tx_errors++;
+ }
+ atomic_dec(&adapter->tx_pending);
+
+ for (i = 0; i < adapter->priv_num; i++) {
+
+ tpriv = adapter->priv[i];
+
+ if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA)
+ && (tpriv->media_connected)) {
+ if (netif_queue_stopped(tpriv->netdev))
+ netif_wake_queue(tpriv->netdev);
+ }
+ }
+done:
+ dev_kfree_skb_any(skb);
+
+ return 0;
+}
+
+/*
+ * Packet receive completion callback handler.
+ *
+ * This function calls another completion callback handler which
+ * updates the statistics, and optionally updates the parent buffer
+ * use count before freeing the received packet.
+ */
+int mwifiex_recv_packet_complete(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb, int status)
+{
+ struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb);
+ struct mwifiex_rxinfo *rx_info_parent;
+ struct mwifiex_private *priv;
+ struct sk_buff *skb_parent;
+ unsigned long flags;
+
+ priv = adapter->priv[rx_info->bss_index];
+
+ if (priv && (status == -1))
+ priv->stats.rx_dropped++;
+
+ if (rx_info->parent) {
+ skb_parent = rx_info->parent;
+ rx_info_parent = MWIFIEX_SKB_RXCB(skb_parent);
+
+ spin_lock_irqsave(&priv->rx_pkt_lock, flags);
+ --rx_info_parent->use_count;
+
+ if (!rx_info_parent->use_count) {
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+ dev_kfree_skb_any(skb_parent);
+ } else {
+ spin_unlock_irqrestore(&priv->rx_pkt_lock, flags);
+ }
+ } else {
+ dev_kfree_skb_any(skb);
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
new file mode 100644
index 0000000..d412915
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -0,0 +1,202 @@
+/*
+ * Marvell Wireless LAN device driver: utility functions
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+/*
+ * Firmware initialization complete callback handler.
+ *
+ * This function wakes up the function waiting on the init
+ * wait queue for the firmware initialization to complete.
+ */
+int mwifiex_init_fw_complete(struct mwifiex_adapter *adapter)
+{
+
+ adapter->init_wait_q_woken = true;
+ wake_up_interruptible(&adapter->init_wait_q);
+ return 0;
+}
+
+/*
+ * Firmware shutdown complete callback handler.
+ *
+ * This function sets the hardware status to not ready and wakes up
+ * the function waiting on the init wait queue for the firmware
+ * shutdown to complete.
+ */
+int mwifiex_shutdown_fw_complete(struct mwifiex_adapter *adapter)
+{
+ adapter->hw_status = MWIFIEX_HW_STATUS_NOT_READY;
+ adapter->init_wait_q_woken = true;
+ wake_up_interruptible(&adapter->init_wait_q);
+ return 0;
+}
+
+/*
+ * This function sends init/shutdown command
+ * to firmware.
+ */
+int mwifiex_init_shutdown_fw(struct mwifiex_private *priv,
+ u32 func_init_shutdown)
+{
+ u16 cmd;
+
+ if (func_init_shutdown == MWIFIEX_FUNC_INIT) {
+ cmd = HostCmd_CMD_FUNC_INIT;
+ } else if (func_init_shutdown == MWIFIEX_FUNC_SHUTDOWN) {
+ cmd = HostCmd_CMD_FUNC_SHUTDOWN;
+ } else {
+ dev_err(priv->adapter->dev, "unsupported parameter\n");
+ return -1;
+ }
+
+ return mwifiex_send_cmd_sync(priv, cmd, HostCmd_ACT_GEN_SET, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(mwifiex_init_shutdown_fw);
+
+/*
+ * IOCTL request handler to set/get debug information.
+ *
+ * This function collates/sets the information from/to different driver
+ * structures.
+ */
+int mwifiex_get_debug_info(struct mwifiex_private *priv,
+ struct mwifiex_debug_info *info)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ if (info) {
+ memcpy(info->packets_out,
+ priv->wmm.packets_out,
+ sizeof(priv->wmm.packets_out));
+ info->max_tx_buf_size = (u32) adapter->max_tx_buf_size;
+ info->tx_buf_size = (u32) adapter->tx_buf_size;
+ info->rx_tbl_num = mwifiex_get_rx_reorder_tbl(
+ priv, info->rx_tbl);
+ info->tx_tbl_num = mwifiex_get_tx_ba_stream_tbl(
+ priv, info->tx_tbl);
+ info->ps_mode = adapter->ps_mode;
+ info->ps_state = adapter->ps_state;
+ info->is_deep_sleep = adapter->is_deep_sleep;
+ info->pm_wakeup_card_req = adapter->pm_wakeup_card_req;
+ info->pm_wakeup_fw_try = adapter->pm_wakeup_fw_try;
+ info->is_hs_configured = adapter->is_hs_configured;
+ info->hs_activated = adapter->hs_activated;
+ info->num_cmd_host_to_card_failure
+ = adapter->dbg.num_cmd_host_to_card_failure;
+ info->num_cmd_sleep_cfm_host_to_card_failure
+ = adapter->dbg.num_cmd_sleep_cfm_host_to_card_failure;
+ info->num_tx_host_to_card_failure
+ = adapter->dbg.num_tx_host_to_card_failure;
+ info->num_event_deauth = adapter->dbg.num_event_deauth;
+ info->num_event_disassoc = adapter->dbg.num_event_disassoc;
+ info->num_event_link_lost = adapter->dbg.num_event_link_lost;
+ info->num_cmd_deauth = adapter->dbg.num_cmd_deauth;
+ info->num_cmd_assoc_success =
+ adapter->dbg.num_cmd_assoc_success;
+ info->num_cmd_assoc_failure =
+ adapter->dbg.num_cmd_assoc_failure;
+ info->num_tx_timeout = adapter->dbg.num_tx_timeout;
+ info->num_cmd_timeout = adapter->dbg.num_cmd_timeout;
+ info->timeout_cmd_id = adapter->dbg.timeout_cmd_id;
+ info->timeout_cmd_act = adapter->dbg.timeout_cmd_act;
+ memcpy(info->last_cmd_id, adapter->dbg.last_cmd_id,
+ sizeof(adapter->dbg.last_cmd_id));
+ memcpy(info->last_cmd_act, adapter->dbg.last_cmd_act,
+ sizeof(adapter->dbg.last_cmd_act));
+ info->last_cmd_index = adapter->dbg.last_cmd_index;
+ memcpy(info->last_cmd_resp_id, adapter->dbg.last_cmd_resp_id,
+ sizeof(adapter->dbg.last_cmd_resp_id));
+ info->last_cmd_resp_index = adapter->dbg.last_cmd_resp_index;
+ memcpy(info->last_event, adapter->dbg.last_event,
+ sizeof(adapter->dbg.last_event));
+ info->last_event_index = adapter->dbg.last_event_index;
+ info->data_sent = adapter->data_sent;
+ info->cmd_sent = adapter->cmd_sent;
+ info->cmd_resp_received = adapter->cmd_resp_received;
+ }
+
+ return 0;
+}
+
+/*
+ * This function processes the received packet before sending it to the
+ * kernel.
+ *
+ * It extracts the SKB from the received buffer and sends it to kernel.
+ * In case the received buffer does not contain the data in SKB format,
+ * the function creates a blank SKB, fills it with the data from the
+ * received buffer and then sends this new SKB to the kernel.
+ */
+int mwifiex_recv_packet(struct mwifiex_adapter *adapter, struct sk_buff *skb)
+{
+ struct mwifiex_rxinfo *rx_info;
+ struct mwifiex_private *priv;
+
+ if (!skb)
+ return -1;
+
+ rx_info = MWIFIEX_SKB_RXCB(skb);
+ priv = mwifiex_bss_index_to_priv(adapter, rx_info->bss_index);
+ if (!priv)
+ return -1;
+
+ skb->dev = priv->netdev;
+ skb->protocol = eth_type_trans(skb, priv->netdev);
+ skb->ip_summed = CHECKSUM_NONE;
+ priv->stats.rx_bytes += skb->len;
+ priv->stats.rx_packets++;
+ if (in_interrupt())
+ netif_rx(skb);
+ else
+ netif_rx_ni(skb);
+
+ return 0;
+}
+
+/*
+ * IOCTL completion callback handler.
+ *
+ * This function is called when a pending IOCTL is completed.
+ *
+ * If work queue support is enabled, the function wakes up the
+ * corresponding waiting function. Otherwise, it processes the
+ * IOCTL response and frees the response buffer.
+ */
+int mwifiex_complete_cmd(struct mwifiex_adapter *adapter)
+{
+ atomic_dec(&adapter->cmd_pending);
+ dev_dbg(adapter->dev, "cmd completed: status=%d\n",
+ adapter->cmd_wait_q.status);
+
+ adapter->cmd_wait_q.condition = true;
+
+ if (adapter->cmd_wait_q.status == -ETIMEDOUT)
+ dev_err(adapter->dev, "cmd timeout\n");
+ else
+ wake_up_interruptible(&adapter->cmd_wait_q.wait);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/util.h b/drivers/net/wireless/mwifiex/util.h
new file mode 100644
index 0000000..9506afc
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/util.h
@@ -0,0 +1,32 @@
+/*
+ * Marvell Wireless LAN device driver: utility functions
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_UTIL_H_
+#define _MWIFIEX_UTIL_H_
+
+static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb)
+{
+ return (struct mwifiex_rxinfo *)skb->cb;
+}
+
+static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb)
+{
+ return (struct mwifiex_txinfo *)skb->cb;
+}
+#endif /* !_MWIFIEX_UTIL_H_ */
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
new file mode 100644
index 0000000..faa09e3
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -0,0 +1,1231 @@
+/*
+ * Marvell Wireless LAN device driver: WMM
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+
+
+/* Maximum value FW can accept for driver delay in packet transmission */
+#define DRV_PKT_DELAY_TO_FW_MAX 512
+
+
+#define WMM_QUEUED_PACKET_LOWER_LIMIT 180
+
+#define WMM_QUEUED_PACKET_UPPER_LIMIT 200
+
+/* Offset for TOS field in the IP header */
+#define IPTOS_OFFSET 5
+
+/* WMM information IE */
+static const u8 wmm_info_ie[] = { WLAN_EID_VENDOR_SPECIFIC, 0x07,
+ 0x00, 0x50, 0xf2, 0x02,
+ 0x00, 0x01, 0x00
+};
+
+static const u8 wmm_aci_to_qidx_map[] = { WMM_AC_BE,
+ WMM_AC_BK,
+ WMM_AC_VI,
+ WMM_AC_VO
+};
+
+static u8 tos_to_tid[] = {
+ /* TID DSCP_P2 DSCP_P1 DSCP_P0 WMM_AC */
+ 0x01, /* 0 1 0 AC_BK */
+ 0x02, /* 0 0 0 AC_BK */
+ 0x00, /* 0 0 1 AC_BE */
+ 0x03, /* 0 1 1 AC_BE */
+ 0x04, /* 1 0 0 AC_VI */
+ 0x05, /* 1 0 1 AC_VI */
+ 0x06, /* 1 1 0 AC_VO */
+ 0x07 /* 1 1 1 AC_VO */
+};
+
+/*
+ * This table inverses the tos_to_tid operation to get a priority
+ * which is in sequential order, and can be compared.
+ * Use this to compare the priority of two different TIDs.
+ */
+static u8 tos_to_tid_inv[] = {
+ 0x02, /* from tos_to_tid[2] = 0 */
+ 0x00, /* from tos_to_tid[0] = 1 */
+ 0x01, /* from tos_to_tid[1] = 2 */
+ 0x03,
+ 0x04,
+ 0x05,
+ 0x06,
+ 0x07};
+
+static u8 ac_to_tid[4][2] = { {1, 2}, {0, 3}, {4, 5}, {6, 7} };
+
+/*
+ * This function debug prints the priority parameters for a WMM AC.
+ */
+static void
+mwifiex_wmm_ac_debug_print(const struct ieee_types_wmm_ac_parameters *ac_param)
+{
+ const char *ac_str[] = { "BK", "BE", "VI", "VO" };
+
+ pr_debug("info: WMM AC_%s: ACI=%d, ACM=%d, Aifsn=%d, "
+ "EcwMin=%d, EcwMax=%d, TxopLimit=%d\n",
+ ac_str[wmm_aci_to_qidx_map[(ac_param->aci_aifsn_bitmap
+ & MWIFIEX_ACI) >> 5]],
+ (ac_param->aci_aifsn_bitmap & MWIFIEX_ACI) >> 5,
+ (ac_param->aci_aifsn_bitmap & MWIFIEX_ACM) >> 4,
+ ac_param->aci_aifsn_bitmap & MWIFIEX_AIFSN,
+ ac_param->ecw_bitmap & MWIFIEX_ECW_MIN,
+ (ac_param->ecw_bitmap & MWIFIEX_ECW_MAX) >> 4,
+ le16_to_cpu(ac_param->tx_op_limit));
+}
+
+/*
+ * This function allocates a route address list.
+ *
+ * The function also initializes the list with the provided RA.
+ */
+static struct mwifiex_ra_list_tbl *
+mwifiex_wmm_allocate_ralist_node(struct mwifiex_adapter *adapter, u8 *ra)
+{
+ struct mwifiex_ra_list_tbl *ra_list;
+
+ ra_list = kzalloc(sizeof(struct mwifiex_ra_list_tbl), GFP_ATOMIC);
+
+ if (!ra_list) {
+ dev_err(adapter->dev, "%s: failed to alloc ra_list\n",
+ __func__);
+ return NULL;
+ }
+ INIT_LIST_HEAD(&ra_list->list);
+ skb_queue_head_init(&ra_list->skb_head);
+
+ memcpy(ra_list->ra, ra, ETH_ALEN);
+
+ ra_list->total_pkts_size = 0;
+
+ dev_dbg(adapter->dev, "info: allocated ra_list %p\n", ra_list);
+
+ return ra_list;
+}
+
+/*
+ * This function allocates and adds a RA list for all TIDs
+ * with the given RA.
+ */
+void
+mwifiex_ralist_add(struct mwifiex_private *priv, u8 *ra)
+{
+ int i;
+ struct mwifiex_ra_list_tbl *ra_list;
+ struct mwifiex_adapter *adapter = priv->adapter;
+
+ for (i = 0; i < MAX_NUM_TID; ++i) {
+ ra_list = mwifiex_wmm_allocate_ralist_node(adapter, ra);
+ dev_dbg(adapter->dev, "info: created ra_list %p\n", ra_list);
+
+ if (!ra_list)
+ break;
+
+ if (!mwifiex_queuing_ra_based(priv))
+ ra_list->is_11n_enabled = IS_11N_ENABLED(priv);
+ else
+ ra_list->is_11n_enabled = false;
+
+ dev_dbg(adapter->dev, "data: ralist %p: is_11n_enabled=%d\n",
+ ra_list, ra_list->is_11n_enabled);
+
+ list_add_tail(&ra_list->list,
+ &priv->wmm.tid_tbl_ptr[i].ra_list);
+
+ if (!priv->wmm.tid_tbl_ptr[i].ra_list_curr)
+ priv->wmm.tid_tbl_ptr[i].ra_list_curr = ra_list;
+ }
+}
+
+/*
+ * This function sets the WMM queue priorities to their default values.
+ */
+static void mwifiex_wmm_default_queue_priorities(struct mwifiex_private *priv)
+{
+ /* Default queue priorities: VO->VI->BE->BK */
+ priv->wmm.queue_priority[0] = WMM_AC_VO;
+ priv->wmm.queue_priority[1] = WMM_AC_VI;
+ priv->wmm.queue_priority[2] = WMM_AC_BE;
+ priv->wmm.queue_priority[3] = WMM_AC_BK;
+}
+
+/*
+ * This function map ACs to TIDs.
+ */
+static void
+mwifiex_wmm_queue_priorities_tid(u8 queue_priority[])
+{
+ int i;
+
+ for (i = 0; i < 4; ++i) {
+ tos_to_tid[7 - (i * 2)] = ac_to_tid[queue_priority[i]][1];
+ tos_to_tid[6 - (i * 2)] = ac_to_tid[queue_priority[i]][0];
+ }
+}
+
+/*
+ * This function initializes WMM priority queues.
+ */
+void
+mwifiex_wmm_setup_queue_priorities(struct mwifiex_private *priv,
+ struct ieee_types_wmm_parameter *wmm_ie)
+{
+ u16 cw_min, avg_back_off, tmp[4];
+ u32 i, j, num_ac;
+ u8 ac_idx;
+
+ if (!wmm_ie || !priv->wmm_enabled) {
+ /* WMM is not enabled, just set the defaults and return */
+ mwifiex_wmm_default_queue_priorities(priv);
+ return;
+ }
+
+ dev_dbg(priv->adapter->dev, "info: WMM Parameter IE: version=%d, "
+ "qos_info Parameter Set Count=%d, Reserved=%#x\n",
+ wmm_ie->vend_hdr.version, wmm_ie->qos_info_bitmap &
+ IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK,
+ wmm_ie->reserved);
+
+ for (num_ac = 0; num_ac < ARRAY_SIZE(wmm_ie->ac_params); num_ac++) {
+ cw_min = (1 << (wmm_ie->ac_params[num_ac].ecw_bitmap &
+ MWIFIEX_ECW_MIN)) - 1;
+ avg_back_off = (cw_min >> 1) +
+ (wmm_ie->ac_params[num_ac].aci_aifsn_bitmap &
+ MWIFIEX_AIFSN);
+
+ ac_idx = wmm_aci_to_qidx_map[(wmm_ie->ac_params[num_ac].
+ aci_aifsn_bitmap &
+ MWIFIEX_ACI) >> 5];
+ priv->wmm.queue_priority[ac_idx] = ac_idx;
+ tmp[ac_idx] = avg_back_off;
+
+ dev_dbg(priv->adapter->dev, "info: WMM: CWmax=%d CWmin=%d Avg Back-off=%d\n",
+ (1 << ((wmm_ie->ac_params[num_ac].ecw_bitmap &
+ MWIFIEX_ECW_MAX) >> 4)) - 1,
+ cw_min, avg_back_off);
+ mwifiex_wmm_ac_debug_print(&wmm_ie->ac_params[num_ac]);
+ }
+
+ /* Bubble sort */
+ for (i = 0; i < num_ac; i++) {
+ for (j = 1; j < num_ac - i; j++) {
+ if (tmp[j - 1] > tmp[j]) {
+ swap(tmp[j - 1], tmp[j]);
+ swap(priv->wmm.queue_priority[j - 1],
+ priv->wmm.queue_priority[j]);
+ } else if (tmp[j - 1] == tmp[j]) {
+ if (priv->wmm.queue_priority[j - 1]
+ < priv->wmm.queue_priority[j])
+ swap(priv->wmm.queue_priority[j - 1],
+ priv->wmm.queue_priority[j]);
+ }
+ }
+ }
+
+ mwifiex_wmm_queue_priorities_tid(priv->wmm.queue_priority);
+}
+
+/*
+ * This function evaluates whether or not an AC is to be downgraded.
+ *
+ * In case the AC is not enabled, the highest AC is returned that is
+ * enabled and does not require admission control.
+ */
+static enum mwifiex_wmm_ac_e
+mwifiex_wmm_eval_downgrade_ac(struct mwifiex_private *priv,
+ enum mwifiex_wmm_ac_e eval_ac)
+{
+ int down_ac;
+ enum mwifiex_wmm_ac_e ret_ac;
+ struct mwifiex_wmm_ac_status *ac_status;
+
+ ac_status = &priv->wmm.ac_status[eval_ac];
+
+ if (!ac_status->disabled)
+ /* Okay to use this AC, its enabled */
+ return eval_ac;
+
+ /* Setup a default return value of the lowest priority */
+ ret_ac = WMM_AC_BK;
+
+ /*
+ * Find the highest AC that is enabled and does not require
+ * admission control. The spec disallows downgrading to an AC,
+ * which is enabled due to a completed admission control.
+ * Unadmitted traffic is not to be sent on an AC with admitted
+ * traffic.
+ */
+ for (down_ac = WMM_AC_BK; down_ac < eval_ac; down_ac++) {
+ ac_status = &priv->wmm.ac_status[down_ac];
+
+ if (!ac_status->disabled && !ac_status->flow_required)
+ /* AC is enabled and does not require admission
+ control */
+ ret_ac = (enum mwifiex_wmm_ac_e) down_ac;
+ }
+
+ return ret_ac;
+}
+
+/*
+ * This function downgrades WMM priority queue.
+ */
+void
+mwifiex_wmm_setup_ac_downgrade(struct mwifiex_private *priv)
+{
+ int ac_val;
+
+ dev_dbg(priv->adapter->dev, "info: WMM: AC Priorities:"
+ "BK(0), BE(1), VI(2), VO(3)\n");
+
+ if (!priv->wmm_enabled) {
+ /* WMM is not enabled, default priorities */
+ for (ac_val = WMM_AC_BK; ac_val <= WMM_AC_VO; ac_val++)
+ priv->wmm.ac_down_graded_vals[ac_val] =
+ (enum mwifiex_wmm_ac_e) ac_val;
+ } else {
+ for (ac_val = WMM_AC_BK; ac_val <= WMM_AC_VO; ac_val++) {
+ priv->wmm.ac_down_graded_vals[ac_val]
+ = mwifiex_wmm_eval_downgrade_ac(priv,
+ (enum mwifiex_wmm_ac_e) ac_val);
+ dev_dbg(priv->adapter->dev, "info: WMM: AC PRIO %d maps to %d\n",
+ ac_val, priv->wmm.ac_down_graded_vals[ac_val]);
+ }
+ }
+}
+
+/*
+ * This function converts the IP TOS field to an WMM AC
+ * Queue assignment.
+ */
+static enum mwifiex_wmm_ac_e
+mwifiex_wmm_convert_tos_to_ac(struct mwifiex_adapter *adapter, u32 tos)
+{
+ /* Map of TOS UP values to WMM AC */
+ const enum mwifiex_wmm_ac_e tos_to_ac[] = { WMM_AC_BE,
+ WMM_AC_BK,
+ WMM_AC_BK,
+ WMM_AC_BE,
+ WMM_AC_VI,
+ WMM_AC_VI,
+ WMM_AC_VO,
+ WMM_AC_VO
+ };
+
+ if (tos >= ARRAY_SIZE(tos_to_ac))
+ return WMM_AC_BE;
+
+ return tos_to_ac[tos];
+}
+
+/*
+ * This function evaluates a given TID and downgrades it to a lower
+ * TID if the WMM Parameter IE received from the AP indicates that the
+ * AP is disabled (due to call admission control (ACM bit). Mapping
+ * of TID to AC is taken care of internally.
+ */
+static u8
+mwifiex_wmm_downgrade_tid(struct mwifiex_private *priv, u32 tid)
+{
+ enum mwifiex_wmm_ac_e ac, ac_down;
+ u8 new_tid;
+
+ ac = mwifiex_wmm_convert_tos_to_ac(priv->adapter, tid);
+ ac_down = priv->wmm.ac_down_graded_vals[ac];
+
+ /* Send the index to tid array, picking from the array will be
+ * taken care by dequeuing function
+ */
+ new_tid = ac_to_tid[ac_down][tid % 2];
+
+ return new_tid;
+}
+
+/*
+ * This function initializes the WMM state information and the
+ * WMM data path queues.
+ */
+void
+mwifiex_wmm_init(struct mwifiex_adapter *adapter)
+{
+ int i, j;
+ struct mwifiex_private *priv;
+
+ for (j = 0; j < adapter->priv_num; ++j) {
+ priv = adapter->priv[j];
+ if (!priv)
+ continue;
+
+ for (i = 0; i < MAX_NUM_TID; ++i) {
+ priv->aggr_prio_tbl[i].amsdu = tos_to_tid_inv[i];
+ priv->aggr_prio_tbl[i].ampdu_ap = tos_to_tid_inv[i];
+ priv->aggr_prio_tbl[i].ampdu_user = tos_to_tid_inv[i];
+ priv->wmm.tid_tbl_ptr[i].ra_list_curr = NULL;
+ }
+
+ priv->aggr_prio_tbl[6].amsdu
+ = priv->aggr_prio_tbl[6].ampdu_ap
+ = priv->aggr_prio_tbl[6].ampdu_user
+ = BA_STREAM_NOT_ALLOWED;
+
+ priv->aggr_prio_tbl[7].amsdu = priv->aggr_prio_tbl[7].ampdu_ap
+ = priv->aggr_prio_tbl[7].ampdu_user
+ = BA_STREAM_NOT_ALLOWED;
+
+ priv->add_ba_param.timeout = MWIFIEX_DEFAULT_BLOCK_ACK_TIMEOUT;
+ priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
+ priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
+ }
+}
+
+/*
+ * This function checks if WMM Tx queue is empty.
+ */
+int
+mwifiex_wmm_lists_empty(struct mwifiex_adapter *adapter)
+{
+ int i, j;
+ struct mwifiex_private *priv;
+
+ for (j = 0; j < adapter->priv_num; ++j) {
+ priv = adapter->priv[j];
+ if (priv) {
+ for (i = 0; i < MAX_NUM_TID; i++)
+ if (!mwifiex_wmm_is_ra_list_empty(
+ &priv->wmm.tid_tbl_ptr[i].ra_list))
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/*
+ * This function deletes all packets in an RA list node.
+ *
+ * The packet sent completion callback handler are called with
+ * status failure, after they are dequeued to ensure proper
+ * cleanup. The RA list node itself is freed at the end.
+ */
+static void
+mwifiex_wmm_del_pkts_in_ralist_node(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ra_list)
+{
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct sk_buff *skb, *tmp;
+
+ skb_queue_walk_safe(&ra_list->skb_head, skb, tmp)
+ mwifiex_write_data_complete(adapter, skb, -1);
+}
+
+/*
+ * This function deletes all packets in an RA list.
+ *
+ * Each nodes in the RA list are freed individually first, and then
+ * the RA list itself is freed.
+ */
+static void
+mwifiex_wmm_del_pkts_in_ralist(struct mwifiex_private *priv,
+ struct list_head *ra_list_head)
+{
+ struct mwifiex_ra_list_tbl *ra_list;
+
+ list_for_each_entry(ra_list, ra_list_head, list)
+ mwifiex_wmm_del_pkts_in_ralist_node(priv, ra_list);
+}
+
+/*
+ * This function deletes all packets in all RA lists.
+ */
+static void mwifiex_wmm_cleanup_queues(struct mwifiex_private *priv)
+{
+ int i;
+
+ for (i = 0; i < MAX_NUM_TID; i++)
+ mwifiex_wmm_del_pkts_in_ralist(priv, &priv->wmm.tid_tbl_ptr[i].
+ ra_list);
+}
+
+/*
+ * This function deletes all route addresses from all RA lists.
+ */
+static void mwifiex_wmm_delete_all_ralist(struct mwifiex_private *priv)
+{
+ struct mwifiex_ra_list_tbl *ra_list, *tmp_node;
+ int i;
+
+ for (i = 0; i < MAX_NUM_TID; ++i) {
+ dev_dbg(priv->adapter->dev,
+ "info: ra_list: freeing buf for tid %d\n", i);
+ list_for_each_entry_safe(ra_list, tmp_node,
+ &priv->wmm.tid_tbl_ptr[i].ra_list, list) {
+ list_del(&ra_list->list);
+ kfree(ra_list);
+ }
+
+ INIT_LIST_HEAD(&priv->wmm.tid_tbl_ptr[i].ra_list);
+
+ priv->wmm.tid_tbl_ptr[i].ra_list_curr = NULL;
+ }
+}
+
+/*
+ * This function cleans up the Tx and Rx queues.
+ *
+ * Cleanup includes -
+ * - All packets in RA lists
+ * - All entries in Rx reorder table
+ * - All entries in Tx BA stream table
+ * - MPA buffer (if required)
+ * - All RA lists
+ */
+void
+mwifiex_clean_txrx(struct mwifiex_private *priv)
+{
+ unsigned long flags;
+
+ mwifiex_11n_cleanup_reorder_tbl(priv);
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
+
+ mwifiex_wmm_cleanup_queues(priv);
+ mwifiex_11n_delete_all_tx_ba_stream_tbl(priv);
+
+ if (priv->adapter->if_ops.cleanup_mpa_buf)
+ priv->adapter->if_ops.cleanup_mpa_buf(priv->adapter);
+
+ mwifiex_wmm_delete_all_ralist(priv);
+ memcpy(tos_to_tid, ac_to_tid, sizeof(tos_to_tid));
+
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+}
+
+/*
+ * This function retrieves a particular RA list node, matching with the
+ * given TID and RA address.
+ */
+static struct mwifiex_ra_list_tbl *
+mwifiex_wmm_get_ralist_node(struct mwifiex_private *priv, u8 tid,
+ u8 *ra_addr)
+{
+ struct mwifiex_ra_list_tbl *ra_list;
+
+ list_for_each_entry(ra_list, &priv->wmm.tid_tbl_ptr[tid].ra_list,
+ list) {
+ if (!memcmp(ra_list->ra, ra_addr, ETH_ALEN))
+ return ra_list;
+ }
+
+ return NULL;
+}
+
+/*
+ * This function retrieves an RA list node for a given TID and
+ * RA address pair.
+ *
+ * If no such node is found, a new node is added first and then
+ * retrieved.
+ */
+static struct mwifiex_ra_list_tbl *
+mwifiex_wmm_get_queue_raptr(struct mwifiex_private *priv, u8 tid, u8 *ra_addr)
+{
+ struct mwifiex_ra_list_tbl *ra_list;
+
+ ra_list = mwifiex_wmm_get_ralist_node(priv, tid, ra_addr);
+ if (ra_list)
+ return ra_list;
+ mwifiex_ralist_add(priv, ra_addr);
+
+ return mwifiex_wmm_get_ralist_node(priv, tid, ra_addr);
+}
+
+/*
+ * This function checks if a particular RA list node exists in a given TID
+ * table index.
+ */
+int
+mwifiex_is_ralist_valid(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ra_list, int ptr_index)
+{
+ struct mwifiex_ra_list_tbl *rlist;
+
+ list_for_each_entry(rlist, &priv->wmm.tid_tbl_ptr[ptr_index].ra_list,
+ list) {
+ if (rlist == ra_list)
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * This function adds a packet to WMM queue.
+ *
+ * In disconnected state the packet is immediately dropped and the
+ * packet send completion callback is called with status failure.
+ *
+ * Otherwise, the correct RA list node is located and the packet
+ * is queued at the list tail.
+ */
+void
+mwifiex_wmm_add_buf_txqueue(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb)
+{
+ struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb);
+ struct mwifiex_private *priv = adapter->priv[tx_info->bss_index];
+ u32 tid;
+ struct mwifiex_ra_list_tbl *ra_list;
+ u8 ra[ETH_ALEN], tid_down;
+ unsigned long flags;
+
+ if (!priv->media_connected) {
+ dev_dbg(adapter->dev, "data: drop packet in disconnect\n");
+ mwifiex_write_data_complete(adapter, skb, -1);
+ return;
+ }
+
+ tid = skb->priority;
+
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
+
+ tid_down = mwifiex_wmm_downgrade_tid(priv, tid);
+
+ /* In case of infra as we have already created the list during
+ association we just don't have to call get_queue_raptr, we will
+ have only 1 raptr for a tid in case of infra */
+ if (!mwifiex_queuing_ra_based(priv)) {
+ if (!list_empty(&priv->wmm.tid_tbl_ptr[tid_down].ra_list))
+ ra_list = list_first_entry(
+ &priv->wmm.tid_tbl_ptr[tid_down].ra_list,
+ struct mwifiex_ra_list_tbl, list);
+ else
+ ra_list = NULL;
+ } else {
+ memcpy(ra, skb->data, ETH_ALEN);
+ ra_list = mwifiex_wmm_get_queue_raptr(priv, tid_down, ra);
+ }
+
+ if (!ra_list) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+ mwifiex_write_data_complete(adapter, skb, -1);
+ return;
+ }
+
+ skb_queue_tail(&ra_list->skb_head, skb);
+
+ ra_list->total_pkts_size += skb->len;
+
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+}
+
+/*
+ * This function processes the get WMM status command response from firmware.
+ *
+ * The response may contain multiple TLVs -
+ * - AC Queue status TLVs
+ * - Current WMM Parameter IE TLV
+ * - Admission Control action frame TLVs
+ *
+ * This function parses the TLVs and then calls further specific functions
+ * to process any changes in the queue prioritize or state.
+ */
+int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv,
+ const struct host_cmd_ds_command *resp)
+{
+ u8 *curr = (u8 *) &resp->params.get_wmm_status;
+ uint16_t resp_len = le16_to_cpu(resp->size), tlv_len;
+ int valid = true;
+
+ struct mwifiex_ie_types_data *tlv_hdr;
+ struct mwifiex_ie_types_wmm_queue_status *tlv_wmm_qstatus;
+ struct ieee_types_wmm_parameter *wmm_param_ie = NULL;
+ struct mwifiex_wmm_ac_status *ac_status;
+
+ dev_dbg(priv->adapter->dev, "info: WMM: WMM_GET_STATUS cmdresp received: %d\n",
+ resp_len);
+
+ while ((resp_len >= sizeof(tlv_hdr->header)) && valid) {
+ tlv_hdr = (struct mwifiex_ie_types_data *) curr;
+ tlv_len = le16_to_cpu(tlv_hdr->header.len);
+
+ switch (le16_to_cpu(tlv_hdr->header.type)) {
+ case TLV_TYPE_WMMQSTATUS:
+ tlv_wmm_qstatus =
+ (struct mwifiex_ie_types_wmm_queue_status *)
+ tlv_hdr;
+ dev_dbg(priv->adapter->dev,
+ "info: CMD_RESP: WMM_GET_STATUS:"
+ " QSTATUS TLV: %d, %d, %d\n",
+ tlv_wmm_qstatus->queue_index,
+ tlv_wmm_qstatus->flow_required,
+ tlv_wmm_qstatus->disabled);
+
+ ac_status = &priv->wmm.ac_status[tlv_wmm_qstatus->
+ queue_index];
+ ac_status->disabled = tlv_wmm_qstatus->disabled;
+ ac_status->flow_required =
+ tlv_wmm_qstatus->flow_required;
+ ac_status->flow_created = tlv_wmm_qstatus->flow_created;
+ break;
+
+ case WLAN_EID_VENDOR_SPECIFIC:
+ /*
+ * Point the regular IEEE IE 2 bytes into the Marvell IE
+ * and setup the IEEE IE type and length byte fields
+ */
+
+ wmm_param_ie =
+ (struct ieee_types_wmm_parameter *) (curr +
+ 2);
+ wmm_param_ie->vend_hdr.len = (u8) tlv_len;
+ wmm_param_ie->vend_hdr.element_id =
+ WLAN_EID_VENDOR_SPECIFIC;
+
+ dev_dbg(priv->adapter->dev,
+ "info: CMD_RESP: WMM_GET_STATUS:"
+ " WMM Parameter Set Count: %d\n",
+ wmm_param_ie->qos_info_bitmap &
+ IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK);
+
+ memcpy((u8 *) &priv->curr_bss_params.bss_descriptor.
+ wmm_ie, wmm_param_ie,
+ wmm_param_ie->vend_hdr.len + 2);
+
+ break;
+
+ default:
+ valid = false;
+ break;
+ }
+
+ curr += (tlv_len + sizeof(tlv_hdr->header));
+ resp_len -= (tlv_len + sizeof(tlv_hdr->header));
+ }
+
+ mwifiex_wmm_setup_queue_priorities(priv, wmm_param_ie);
+ mwifiex_wmm_setup_ac_downgrade(priv);
+
+ return 0;
+}
+
+/*
+ * Callback handler from the command module to allow insertion of a WMM TLV.
+ *
+ * If the BSS we are associating to supports WMM, this function adds the
+ * required WMM Information IE to the association request command buffer in
+ * the form of a Marvell extended IEEE IE.
+ */
+u32
+mwifiex_wmm_process_association_req(struct mwifiex_private *priv,
+ u8 **assoc_buf,
+ struct ieee_types_wmm_parameter *wmm_ie,
+ struct ieee80211_ht_cap *ht_cap)
+{
+ struct mwifiex_ie_types_wmm_param_set *wmm_tlv;
+ u32 ret_len = 0;
+
+ /* Null checks */
+ if (!assoc_buf)
+ return 0;
+ if (!(*assoc_buf))
+ return 0;
+
+ if (!wmm_ie)
+ return 0;
+
+ dev_dbg(priv->adapter->dev, "info: WMM: process assoc req:"
+ "bss->wmmIe=0x%x\n",
+ wmm_ie->vend_hdr.element_id);
+
+ if ((priv->wmm_required
+ || (ht_cap && (priv->adapter->config_bands & BAND_GN
+ || priv->adapter->config_bands & BAND_AN))
+ )
+ && wmm_ie->vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC) {
+ wmm_tlv = (struct mwifiex_ie_types_wmm_param_set *) *assoc_buf;
+ wmm_tlv->header.type = cpu_to_le16((u16) wmm_info_ie[0]);
+ wmm_tlv->header.len = cpu_to_le16((u16) wmm_info_ie[1]);
+ memcpy(wmm_tlv->wmm_ie, &wmm_info_ie[2],
+ le16_to_cpu(wmm_tlv->header.len));
+ if (wmm_ie->qos_info_bitmap & IEEE80211_WMM_IE_AP_QOSINFO_UAPSD)
+ memcpy((u8 *) (wmm_tlv->wmm_ie
+ + le16_to_cpu(wmm_tlv->header.len)
+ - sizeof(priv->wmm_qosinfo)),
+ &priv->wmm_qosinfo,
+ sizeof(priv->wmm_qosinfo));
+
+ ret_len = sizeof(wmm_tlv->header)
+ + le16_to_cpu(wmm_tlv->header.len);
+
+ *assoc_buf += ret_len;
+ }
+
+ return ret_len;
+}
+
+/*
+ * This function computes the time delay in the driver queues for a
+ * given packet.
+ *
+ * When the packet is received at the OS/Driver interface, the current
+ * time is set in the packet structure. The difference between the present
+ * time and that received time is computed in this function and limited
+ * based on pre-compiled limits in the driver.
+ */
+u8
+mwifiex_wmm_compute_drv_pkt_delay(struct mwifiex_private *priv,
+ const struct sk_buff *skb)
+{
+ u8 ret_val;
+ struct timeval out_tstamp, in_tstamp;
+ u32 queue_delay;
+
+ do_gettimeofday(&out_tstamp);
+ in_tstamp = ktime_to_timeval(skb->tstamp);
+
+ queue_delay = (out_tstamp.tv_sec - in_tstamp.tv_sec) * 1000;
+ queue_delay += (out_tstamp.tv_usec - in_tstamp.tv_usec) / 1000;
+
+ /*
+ * Queue delay is passed as a uint8 in units of 2ms (ms shifted
+ * by 1). Min value (other than 0) is therefore 2ms, max is 510ms.
+ *
+ * Pass max value if queue_delay is beyond the uint8 range
+ */
+ ret_val = (u8) (min(queue_delay, priv->wmm.drv_pkt_delay_max) >> 1);
+
+ dev_dbg(priv->adapter->dev, "data: WMM: Pkt Delay: %d ms,"
+ " %d ms sent to FW\n", queue_delay, ret_val);
+
+ return ret_val;
+}
+
+/*
+ * This function retrieves the highest priority RA list table pointer.
+ */
+static struct mwifiex_ra_list_tbl *
+mwifiex_wmm_get_highest_priolist_ptr(struct mwifiex_adapter *adapter,
+ struct mwifiex_private **priv, int *tid)
+{
+ struct mwifiex_private *priv_tmp;
+ struct mwifiex_ra_list_tbl *ptr, *head;
+ struct mwifiex_bss_prio_node *bssprio_node, *bssprio_head;
+ struct mwifiex_tid_tbl *tid_ptr;
+ int is_list_empty;
+ unsigned long flags;
+ int i, j;
+
+ for (j = adapter->priv_num - 1; j >= 0; --j) {
+ spin_lock_irqsave(&adapter->bss_prio_tbl[j].bss_prio_lock,
+ flags);
+ is_list_empty = list_empty(&adapter->bss_prio_tbl[j]
+ .bss_prio_head);
+ spin_unlock_irqrestore(&adapter->bss_prio_tbl[j].bss_prio_lock,
+ flags);
+ if (is_list_empty)
+ continue;
+
+ if (adapter->bss_prio_tbl[j].bss_prio_cur ==
+ (struct mwifiex_bss_prio_node *)
+ &adapter->bss_prio_tbl[j].bss_prio_head) {
+ bssprio_node =
+ list_first_entry(&adapter->bss_prio_tbl[j]
+ .bss_prio_head,
+ struct mwifiex_bss_prio_node,
+ list);
+ bssprio_head = bssprio_node;
+ } else {
+ bssprio_node = adapter->bss_prio_tbl[j].bss_prio_cur;
+ bssprio_head = bssprio_node;
+ }
+
+ do {
+ priv_tmp = bssprio_node->priv;
+
+ for (i = HIGH_PRIO_TID; i >= LOW_PRIO_TID; --i) {
+
+ tid_ptr = &(priv_tmp)->wmm.
+ tid_tbl_ptr[tos_to_tid[i]];
+
+ spin_lock_irqsave(&tid_ptr->tid_tbl_lock,
+ flags);
+ is_list_empty =
+ list_empty(&adapter->bss_prio_tbl[j]
+ .bss_prio_head);
+ spin_unlock_irqrestore(&tid_ptr->tid_tbl_lock,
+ flags);
+ if (is_list_empty)
+ continue;
+
+ /*
+ * Always choose the next ra we transmitted
+ * last time, this way we pick the ra's in
+ * round robin fashion.
+ */
+ ptr = list_first_entry(
+ &tid_ptr->ra_list_curr->list,
+ struct mwifiex_ra_list_tbl,
+ list);
+
+ head = ptr;
+ if (ptr == (struct mwifiex_ra_list_tbl *)
+ &tid_ptr->ra_list) {
+ /* Get next ra */
+ ptr = list_first_entry(&ptr->list,
+ struct mwifiex_ra_list_tbl, list);
+ head = ptr;
+ }
+
+ do {
+ is_list_empty =
+ skb_queue_empty(&ptr->skb_head);
+ if (!is_list_empty) {
+ *priv = priv_tmp;
+ *tid = tos_to_tid[i];
+ return ptr;
+ }
+ /* Get next ra */
+ ptr = list_first_entry(&ptr->list,
+ struct mwifiex_ra_list_tbl,
+ list);
+ if (ptr ==
+ (struct mwifiex_ra_list_tbl *)
+ &tid_ptr->ra_list)
+ ptr = list_first_entry(
+ &ptr->list,
+ struct mwifiex_ra_list_tbl,
+ list);
+ } while (ptr != head);
+ }
+
+ /* Get next bss priority node */
+ bssprio_node = list_first_entry(&bssprio_node->list,
+ struct mwifiex_bss_prio_node,
+ list);
+
+ if (bssprio_node ==
+ (struct mwifiex_bss_prio_node *)
+ &adapter->bss_prio_tbl[j].bss_prio_head)
+ /* Get next bss priority node */
+ bssprio_node = list_first_entry(
+ &bssprio_node->list,
+ struct mwifiex_bss_prio_node,
+ list);
+ } while (bssprio_node != bssprio_head);
+ }
+ return NULL;
+}
+
+/*
+ * This function gets the number of packets in the Tx queue of a
+ * particular RA list.
+ */
+static int
+mwifiex_num_pkts_in_txq(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ptr, int max_buf_size)
+{
+ int count = 0, total_size = 0;
+ struct sk_buff *skb, *tmp;
+
+ skb_queue_walk_safe(&ptr->skb_head, skb, tmp) {
+ total_size += skb->len;
+ if (total_size < max_buf_size)
+ ++count;
+ else
+ break;
+ }
+
+ return count;
+}
+
+/*
+ * This function sends a single packet to firmware for transmission.
+ */
+static void
+mwifiex_send_single_packet(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ptr, int ptr_index,
+ unsigned long ra_list_flags)
+ __releases(&priv->wmm.ra_list_spinlock)
+{
+ struct sk_buff *skb, *skb_next;
+ struct mwifiex_tx_param tx_param;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ struct mwifiex_txinfo *tx_info;
+
+ if (skb_queue_empty(&ptr->skb_head)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ dev_dbg(adapter->dev, "data: nothing to send\n");
+ return;
+ }
+
+ skb = skb_dequeue(&ptr->skb_head);
+
+ tx_info = MWIFIEX_SKB_TXCB(skb);
+ dev_dbg(adapter->dev, "data: dequeuing the packet %p %p\n", ptr, skb);
+
+ ptr->total_pkts_size -= skb->len;
+
+ if (!skb_queue_empty(&ptr->skb_head))
+ skb_next = skb_peek(&ptr->skb_head);
+ else
+ skb_next = NULL;
+
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, ra_list_flags);
+
+ tx_param.next_pkt_len = ((skb_next) ? skb_next->len +
+ sizeof(struct txpd) : 0);
+
+ if (mwifiex_process_tx(priv, skb, &tx_param) == -EBUSY) {
+ /* Queue the packet back at the head */
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+
+ if (!mwifiex_is_ralist_valid(priv, ptr, ptr_index)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ mwifiex_write_data_complete(adapter, skb, -1);
+ return;
+ }
+
+ skb_queue_tail(&ptr->skb_head, skb);
+
+ ptr->total_pkts_size += skb->len;
+ tx_info->flags |= MWIFIEX_BUF_FLAG_REQUEUED_PKT;
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ } else {
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+ if (mwifiex_is_ralist_valid(priv, ptr, ptr_index)) {
+ priv->wmm.packets_out[ptr_index]++;
+ priv->wmm.tid_tbl_ptr[ptr_index].ra_list_curr = ptr;
+ }
+ adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur =
+ list_first_entry(
+ &adapter->bss_prio_tbl[priv->bss_priority]
+ .bss_prio_cur->list,
+ struct mwifiex_bss_prio_node,
+ list);
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ }
+}
+
+/*
+ * This function checks if the first packet in the given RA list
+ * is already processed or not.
+ */
+static int
+mwifiex_is_ptr_processed(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ptr)
+{
+ struct sk_buff *skb;
+ struct mwifiex_txinfo *tx_info;
+
+ if (skb_queue_empty(&ptr->skb_head))
+ return false;
+
+ skb = skb_peek(&ptr->skb_head);
+
+ tx_info = MWIFIEX_SKB_TXCB(skb);
+ if (tx_info->flags & MWIFIEX_BUF_FLAG_REQUEUED_PKT)
+ return true;
+
+ return false;
+}
+
+/*
+ * This function sends a single processed packet to firmware for
+ * transmission.
+ */
+static void
+mwifiex_send_processed_packet(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ptr, int ptr_index,
+ unsigned long ra_list_flags)
+ __releases(&priv->wmm.ra_list_spinlock)
+{
+ struct mwifiex_tx_param tx_param;
+ struct mwifiex_adapter *adapter = priv->adapter;
+ int ret = -1;
+ struct sk_buff *skb, *skb_next;
+ struct mwifiex_txinfo *tx_info;
+
+ if (skb_queue_empty(&ptr->skb_head)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ return;
+ }
+
+ skb = skb_dequeue(&ptr->skb_head);
+
+ if (!skb_queue_empty(&ptr->skb_head))
+ skb_next = skb_peek(&ptr->skb_head);
+ else
+ skb_next = NULL;
+
+ tx_info = MWIFIEX_SKB_TXCB(skb);
+
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, ra_list_flags);
+ tx_param.next_pkt_len =
+ ((skb_next) ? skb_next->len +
+ sizeof(struct txpd) : 0);
+ ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA,
+ skb->data, skb->len, &tx_param);
+ switch (ret) {
+ case -EBUSY:
+ dev_dbg(adapter->dev, "data: -EBUSY is returned\n");
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+
+ if (!mwifiex_is_ralist_valid(priv, ptr, ptr_index)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ mwifiex_write_data_complete(adapter, skb, -1);
+ return;
+ }
+
+ skb_queue_tail(&ptr->skb_head, skb);
+
+ tx_info->flags |= MWIFIEX_BUF_FLAG_REQUEUED_PKT;
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ break;
+ case -1:
+ adapter->data_sent = false;
+ dev_err(adapter->dev, "host_to_card failed: %#x\n", ret);
+ adapter->dbg.num_tx_host_to_card_failure++;
+ mwifiex_write_data_complete(adapter, skb, ret);
+ break;
+ case -EINPROGRESS:
+ adapter->data_sent = false;
+ default:
+ break;
+ }
+ if (ret != -EBUSY) {
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags);
+ if (mwifiex_is_ralist_valid(priv, ptr, ptr_index)) {
+ priv->wmm.packets_out[ptr_index]++;
+ priv->wmm.tid_tbl_ptr[ptr_index].ra_list_curr = ptr;
+ }
+ adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur =
+ list_first_entry(
+ &adapter->bss_prio_tbl[priv->bss_priority]
+ .bss_prio_cur->list,
+ struct mwifiex_bss_prio_node,
+ list);
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock,
+ ra_list_flags);
+ }
+}
+
+/*
+ * This function dequeues a packet from the highest priority list
+ * and transmits it.
+ */
+static int
+mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
+{
+ struct mwifiex_ra_list_tbl *ptr;
+ struct mwifiex_private *priv = NULL;
+ int ptr_index = 0;
+ u8 ra[ETH_ALEN];
+ int tid_del = 0, tid = 0;
+ unsigned long flags;
+
+ ptr = mwifiex_wmm_get_highest_priolist_ptr(adapter, &priv, &ptr_index);
+ if (!ptr)
+ return -1;
+
+ tid = mwifiex_get_tid(ptr);
+
+ dev_dbg(adapter->dev, "data: tid=%d\n", tid);
+
+ spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
+ if (!mwifiex_is_ralist_valid(priv, ptr, ptr_index)) {
+ spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
+ return -1;
+ }
+
+ if (mwifiex_is_ptr_processed(priv, ptr)) {
+ mwifiex_send_processed_packet(priv, ptr, ptr_index, flags);
+ /* ra_list_spinlock has been freed in
+ mwifiex_send_processed_packet() */
+ return 0;
+ }
+
+ if (!ptr->is_11n_enabled || mwifiex_is_ba_stream_setup(priv, ptr, tid)
+ || ((priv->sec_info.wpa_enabled
+ || priv->sec_info.wpa2_enabled) && !priv->wpa_is_gtk_set)
+ ) {
+ mwifiex_send_single_packet(priv, ptr, ptr_index, flags);
+ /* ra_list_spinlock has been freed in
+ mwifiex_send_single_packet() */
+ } else {
+ if (mwifiex_is_ampdu_allowed(priv, tid)) {
+ if (mwifiex_space_avail_for_new_ba_stream(adapter)) {
+ mwifiex_11n_create_tx_ba_stream_tbl(priv,
+ ptr->ra, tid,
+ BA_STREAM_SETUP_INPROGRESS);
+ mwifiex_send_addba(priv, tid, ptr->ra);
+ } else if (mwifiex_find_stream_to_delete
+ (priv, tid, &tid_del, ra)) {
+ mwifiex_11n_create_tx_ba_stream_tbl(priv,
+ ptr->ra, tid,
+ BA_STREAM_SETUP_INPROGRESS);
+ mwifiex_send_delba(priv, tid_del, ra, 1);
+ }
+ }
+/* Minimum number of AMSDU */
+#define MIN_NUM_AMSDU 2
+ if (mwifiex_is_amsdu_allowed(priv, tid) &&
+ (mwifiex_num_pkts_in_txq(priv, ptr, adapter->tx_buf_size) >=
+ MIN_NUM_AMSDU))
+ mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN,
+ ptr_index, flags);
+ /* ra_list_spinlock has been freed in
+ mwifiex_11n_aggregate_pkt() */
+ else
+ mwifiex_send_single_packet(priv, ptr, ptr_index, flags);
+ /* ra_list_spinlock has been freed in
+ mwifiex_send_single_packet() */
+ }
+ return 0;
+}
+
+/*
+ * This function transmits the highest priority packet awaiting in the
+ * WMM Queues.
+ */
+void
+mwifiex_wmm_process_tx(struct mwifiex_adapter *adapter)
+{
+ do {
+ /* Check if busy */
+ if (adapter->data_sent || adapter->tx_lock_flag)
+ break;
+
+ if (mwifiex_dequeue_tx_packet(adapter))
+ break;
+ } while (true);
+}
diff --git a/drivers/net/wireless/mwifiex/wmm.h b/drivers/net/wireless/mwifiex/wmm.h
new file mode 100644
index 0000000..fcea1f6
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/wmm.h
@@ -0,0 +1,110 @@
+/*
+ * Marvell Wireless LAN device driver: WMM
+ *
+ * Copyright (C) 2011, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef _MWIFIEX_WMM_H_
+#define _MWIFIEX_WMM_H_
+
+enum ieee_types_wmm_aciaifsn_bitmasks {
+ MWIFIEX_AIFSN = (BIT(0) | BIT(1) | BIT(2) | BIT(3)),
+ MWIFIEX_ACM = BIT(4),
+ MWIFIEX_ACI = (BIT(5) | BIT(6)),
+};
+
+enum ieee_types_wmm_ecw_bitmasks {
+ MWIFIEX_ECW_MIN = (BIT(0) | BIT(1) | BIT(2) | BIT(3)),
+ MWIFIEX_ECW_MAX = (BIT(4) | BIT(5) | BIT(6) | BIT(7)),
+};
+
+/*
+ * This function retrieves the TID of the given RA list.
+ */
+static inline int
+mwifiex_get_tid(struct mwifiex_ra_list_tbl *ptr)
+{
+ struct sk_buff *skb;
+
+ if (skb_queue_empty(&ptr->skb_head))
+ return 0;
+
+ skb = skb_peek(&ptr->skb_head);
+
+ return skb->priority;
+}
+
+/*
+ * This function gets the length of a list.
+ */
+static inline int
+mwifiex_wmm_list_len(struct list_head *head)
+{
+ struct list_head *pos;
+ int count = 0;
+
+ list_for_each(pos, head)
+ ++count;
+
+ return count;
+}
+
+/*
+ * This function checks if a RA list is empty or not.
+ */
+static inline u8
+mwifiex_wmm_is_ra_list_empty(struct list_head *ra_list_hhead)
+{
+ struct mwifiex_ra_list_tbl *ra_list;
+ int is_list_empty;
+
+ list_for_each_entry(ra_list, ra_list_hhead, list) {
+ is_list_empty = skb_queue_empty(&ra_list->skb_head);
+ if (!is_list_empty)
+ return false;
+ }
+
+ return true;
+}
+
+void mwifiex_wmm_add_buf_txqueue(struct mwifiex_adapter *adapter,
+ struct sk_buff *skb);
+void mwifiex_ralist_add(struct mwifiex_private *priv, u8 *ra);
+
+int mwifiex_wmm_lists_empty(struct mwifiex_adapter *adapter);
+void mwifiex_wmm_process_tx(struct mwifiex_adapter *adapter);
+int mwifiex_is_ralist_valid(struct mwifiex_private *priv,
+ struct mwifiex_ra_list_tbl *ra_list, int tid);
+
+u8 mwifiex_wmm_compute_drv_pkt_delay(struct mwifiex_private *priv,
+ const struct sk_buff *skb);
+void mwifiex_wmm_init(struct mwifiex_adapter *adapter);
+
+extern u32 mwifiex_wmm_process_association_req(struct mwifiex_private *priv,
+ u8 **assoc_buf,
+ struct ieee_types_wmm_parameter
+ *wmmie,
+ struct ieee80211_ht_cap
+ *htcap);
+
+void mwifiex_wmm_setup_queue_priorities(struct mwifiex_private *priv,
+ struct ieee_types_wmm_parameter
+ *wmm_ie);
+void mwifiex_wmm_setup_ac_downgrade(struct mwifiex_private *priv);
+extern int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv,
+ const struct host_cmd_ds_command *resp);
+
+#endif /* !_MWIFIEX_WMM_H_ */
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index c1ceb4b..3226118 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -63,6 +63,7 @@
#define MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL 0x00000c38
#define MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK 0x00000c3c
#define MWL8K_A2H_INT_DUMMY (1 << 20)
+#define MWL8K_A2H_INT_BA_WATCHDOG (1 << 14)
#define MWL8K_A2H_INT_CHNL_SWITCHED (1 << 11)
#define MWL8K_A2H_INT_QUEUE_EMPTY (1 << 10)
#define MWL8K_A2H_INT_RADAR_DETECT (1 << 7)
@@ -73,6 +74,14 @@
#define MWL8K_A2H_INT_RX_READY (1 << 1)
#define MWL8K_A2H_INT_TX_DONE (1 << 0)
+/* HW micro second timer register
+ * located at offset 0xA600. This
+ * will be used to timestamp tx
+ * packets.
+ */
+
+#define MWL8K_HW_TIMER_REGISTER 0x0000a600
+
#define MWL8K_A2H_EVENTS (MWL8K_A2H_INT_DUMMY | \
MWL8K_A2H_INT_CHNL_SWITCHED | \
MWL8K_A2H_INT_QUEUE_EMPTY | \
@@ -82,10 +91,14 @@
MWL8K_A2H_INT_MAC_EVENT | \
MWL8K_A2H_INT_OPC_DONE | \
MWL8K_A2H_INT_RX_READY | \
- MWL8K_A2H_INT_TX_DONE)
+ MWL8K_A2H_INT_TX_DONE | \
+ MWL8K_A2H_INT_BA_WATCHDOG)
#define MWL8K_RX_QUEUES 1
-#define MWL8K_TX_QUEUES 4
+#define MWL8K_TX_WMM_QUEUES 4
+#define MWL8K_MAX_AMPDU_QUEUES 8
+#define MWL8K_MAX_TX_QUEUES (MWL8K_TX_WMM_QUEUES + MWL8K_MAX_AMPDU_QUEUES)
+#define mwl8k_tx_queues(priv) (MWL8K_TX_WMM_QUEUES + (priv)->num_ampdu_queues)
struct rxd_ops {
int rxd_size;
@@ -134,6 +147,21 @@
struct sk_buff **skb;
};
+enum {
+ AMPDU_NO_STREAM,
+ AMPDU_STREAM_NEW,
+ AMPDU_STREAM_IN_PROGRESS,
+ AMPDU_STREAM_ACTIVE,
+};
+
+struct mwl8k_ampdu_stream {
+ struct ieee80211_sta *sta;
+ u8 tid;
+ u8 state;
+ u8 idx;
+ u8 txq_idx; /* index of this stream in priv->txq */
+};
+
struct mwl8k_priv {
struct ieee80211_hw *hw;
struct pci_dev *pdev;
@@ -160,6 +188,12 @@
u32 ap_macids_supported;
u32 sta_macids_supported;
+ /* Ampdu stream information */
+ u8 num_ampdu_queues;
+ spinlock_t stream_lock;
+ struct mwl8k_ampdu_stream ampdu[MWL8K_MAX_AMPDU_QUEUES];
+ struct work_struct watchdog_ba_handle;
+
/* firmware access */
struct mutex fw_mutex;
struct task_struct *fw_mutex_owner;
@@ -191,7 +225,8 @@
int pending_tx_pkts;
struct mwl8k_rx_queue rxq[MWL8K_RX_QUEUES];
- struct mwl8k_tx_queue txq[MWL8K_TX_QUEUES];
+ struct mwl8k_tx_queue txq[MWL8K_MAX_TX_QUEUES];
+ u32 txq_offset[MWL8K_MAX_TX_QUEUES];
bool radio_on;
bool radio_short_preamble;
@@ -224,7 +259,7 @@
* preserve the queue configurations so they can be restored if/when
* the firmware image is swapped.
*/
- struct ieee80211_tx_queue_params wmm_params[MWL8K_TX_QUEUES];
+ struct ieee80211_tx_queue_params wmm_params[MWL8K_TX_WMM_QUEUES];
/* async firmware loading state */
unsigned fw_state;
@@ -262,9 +297,17 @@
#define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
#define IEEE80211_KEY_CONF(_u8) ((struct ieee80211_key_conf *)(_u8))
+struct tx_traffic_info {
+ u32 start_time;
+ u32 pkts;
+};
+
+#define MWL8K_MAX_TID 8
struct mwl8k_sta {
/* Index into station database. Returned by UPDATE_STADB. */
u8 peer_id;
+ u8 is_ampdu_allowed;
+ struct tx_traffic_info tx_stats[MWL8K_MAX_TID];
};
#define MWL8K_STA(_sta) ((struct mwl8k_sta *)&((_sta)->drv_priv))
@@ -352,10 +395,12 @@
#define MWL8K_CMD_ENABLE_SNIFFER 0x0150
#define MWL8K_CMD_SET_MAC_ADDR 0x0202 /* per-vif */
#define MWL8K_CMD_SET_RATEADAPT_MODE 0x0203
+#define MWL8K_CMD_GET_WATCHDOG_BITMAP 0x0205
#define MWL8K_CMD_BSS_START 0x1100 /* per-vif */
#define MWL8K_CMD_SET_NEW_STN 0x1111 /* per-vif */
#define MWL8K_CMD_UPDATE_ENCRYPTION 0x1122 /* per-vif */
#define MWL8K_CMD_UPDATE_STADB 0x1123
+#define MWL8K_CMD_BASTREAM 0x1125
static const char *mwl8k_cmd_name(__le16 cmd, char *buf, int bufsize)
{
@@ -395,6 +440,8 @@
MWL8K_CMDNAME(SET_NEW_STN);
MWL8K_CMDNAME(UPDATE_ENCRYPTION);
MWL8K_CMDNAME(UPDATE_STADB);
+ MWL8K_CMDNAME(BASTREAM);
+ MWL8K_CMDNAME(GET_WATCHDOG_BITMAP);
default:
snprintf(buf, bufsize, "0x%x", cmd);
}
@@ -669,7 +716,7 @@
"helper image\n", pci_name(priv->pdev));
return rc;
}
- msleep(5);
+ msleep(20);
rc = mwl8k_feed_fw_image(priv, fw->data, fw->size);
} else {
@@ -734,8 +781,11 @@
skb_pull(skb, sizeof(*tr) - hdrlen);
}
+#define REDUCED_TX_HEADROOM 8
+
static void
-mwl8k_add_dma_header(struct sk_buff *skb, int tail_pad)
+mwl8k_add_dma_header(struct mwl8k_priv *priv, struct sk_buff *skb,
+ int head_pad, int tail_pad)
{
struct ieee80211_hdr *wh;
int hdrlen;
@@ -751,7 +801,23 @@
wh = (struct ieee80211_hdr *)skb->data;
hdrlen = ieee80211_hdrlen(wh->frame_control);
- reqd_hdrlen = sizeof(*tr);
+
+ /*
+ * Check if skb_resize is required because of
+ * tx_headroom adjustment.
+ */
+ if (priv->ap_fw && (hdrlen < (sizeof(struct ieee80211_cts)
+ + REDUCED_TX_HEADROOM))) {
+ if (pskb_expand_head(skb, REDUCED_TX_HEADROOM, 0, GFP_ATOMIC)) {
+
+ wiphy_err(priv->hw->wiphy,
+ "Failed to reallocate TX buffer\n");
+ return;
+ }
+ skb->truesize += REDUCED_TX_HEADROOM;
+ }
+
+ reqd_hdrlen = sizeof(*tr) + head_pad;
if (hdrlen != reqd_hdrlen)
skb_push(skb, reqd_hdrlen - hdrlen);
@@ -773,12 +839,14 @@
tr->fwlen = cpu_to_le16(skb->len - sizeof(*tr) + tail_pad);
}
-static void mwl8k_encapsulate_tx_frame(struct sk_buff *skb)
+static void mwl8k_encapsulate_tx_frame(struct mwl8k_priv *priv,
+ struct sk_buff *skb)
{
struct ieee80211_hdr *wh;
struct ieee80211_tx_info *tx_info;
struct ieee80211_key_conf *key_conf;
int data_pad;
+ int head_pad = 0;
wh = (struct ieee80211_hdr *)skb->data;
@@ -790,9 +858,7 @@
/*
* Make sure the packet header is in the DMA header format (4-address
- * without QoS), the necessary crypto padding between the header and the
- * payload has already been provided by mac80211, but it doesn't add tail
- * padding when HW crypto is enabled.
+ * without QoS), and add head & tail padding when HW crypto is enabled.
*
* We have the following trailer padding requirements:
* - WEP: 4 trailer bytes (ICV)
@@ -801,6 +867,7 @@
*/
data_pad = 0;
if (key_conf != NULL) {
+ head_pad = key_conf->iv_len;
switch (key_conf->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
@@ -814,7 +881,7 @@
break;
}
}
- mwl8k_add_dma_header(skb, data_pad);
+ mwl8k_add_dma_header(priv, skb, head_pad, data_pad);
}
/*
@@ -1127,6 +1194,9 @@
struct mwl8k_rx_queue *rxq = priv->rxq + index;
int i;
+ if (rxq->rxd == NULL)
+ return;
+
for (i = 0; i < MWL8K_RX_DESCS; i++) {
if (rxq->buf[i].skb != NULL) {
pci_unmap_single(priv->pdev,
@@ -1319,7 +1389,7 @@
__le16 pkt_len;
__u8 dest_MAC_addr[ETH_ALEN];
__le32 next_txd_phys_addr;
- __le32 reserved;
+ __le32 timestamp;
__le16 rate_info;
__u8 peer_id;
__u8 tx_frag_cnt;
@@ -1383,7 +1453,7 @@
struct mwl8k_priv *priv = hw->priv;
int i;
- for (i = 0; i < MWL8K_TX_QUEUES; i++) {
+ for (i = 0; i < mwl8k_tx_queues(priv); i++) {
struct mwl8k_tx_queue *txq = priv->txq + i;
int fw_owned = 0;
int drv_owned = 0;
@@ -1452,9 +1522,8 @@
if (timeout) {
WARN_ON(priv->pending_tx_pkts);
- if (retry) {
+ if (retry)
wiphy_notice(hw->wiphy, "tx rings drained\n");
- }
break;
}
@@ -1484,6 +1553,41 @@
MWL8K_TXD_STATUS_OK_RETRY | \
MWL8K_TXD_STATUS_OK_MORE_RETRY))
+static int mwl8k_tid_queue_mapping(u8 tid)
+{
+ BUG_ON(tid > 7);
+
+ switch (tid) {
+ case 0:
+ case 3:
+ return IEEE80211_AC_BE;
+ break;
+ case 1:
+ case 2:
+ return IEEE80211_AC_BK;
+ break;
+ case 4:
+ case 5:
+ return IEEE80211_AC_VI;
+ break;
+ case 6:
+ case 7:
+ return IEEE80211_AC_VO;
+ break;
+ default:
+ return -1;
+ break;
+ }
+}
+
+/* The firmware will fill in the rate information
+ * for each packet that gets queued in the hardware
+ * and these macros will interpret that info.
+ */
+
+#define RI_FORMAT(a) (a & 0x0001)
+#define RI_RATE_ID_MCS(a) ((a & 0x01f8) >> 3)
+
static int
mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int limit, int force)
{
@@ -1500,6 +1604,10 @@
struct sk_buff *skb;
struct ieee80211_tx_info *info;
u32 status;
+ struct ieee80211_sta *sta;
+ struct mwl8k_sta *sta_info = NULL;
+ u16 rate_info;
+ struct ieee80211_hdr *wh;
tx = txq->head;
tx_desc = txq->txd + tx;
@@ -1528,18 +1636,40 @@
mwl8k_remove_dma_header(skb, tx_desc->qos_control);
+ wh = (struct ieee80211_hdr *) skb->data;
+
/* Mark descriptor as unused */
tx_desc->pkt_phys_addr = 0;
tx_desc->pkt_len = 0;
info = IEEE80211_SKB_CB(skb);
+ if (ieee80211_is_data(wh->frame_control)) {
+ sta = info->control.sta;
+ if (sta) {
+ sta_info = MWL8K_STA(sta);
+ BUG_ON(sta_info == NULL);
+ rate_info = le16_to_cpu(tx_desc->rate_info);
+ /* If rate is < 6.5 Mpbs for an ht station
+ * do not form an ampdu. If the station is a
+ * legacy station (format = 0), do not form an
+ * ampdu
+ */
+ if (RI_RATE_ID_MCS(rate_info) < 1 ||
+ RI_FORMAT(rate_info) == 0) {
+ sta_info->is_ampdu_allowed = false;
+ } else {
+ sta_info->is_ampdu_allowed = true;
+ }
+ }
+ }
+
ieee80211_tx_info_clear_status(info);
/* Rate control is happening in the firmware.
* Ensure no tx rate is being reported.
*/
- info->status.rates[0].idx = -1;
- info->status.rates[0].count = 1;
+ info->status.rates[0].idx = -1;
+ info->status.rates[0].count = 1;
if (MWL8K_TXD_SUCCESS(status))
info->flags |= IEEE80211_TX_STAT_ACK;
@@ -1549,9 +1679,6 @@
processed++;
}
- if (processed && priv->radio_on && !mutex_is_locked(&priv->fw_mutex))
- ieee80211_wake_queue(hw, index);
-
return processed;
}
@@ -1561,6 +1688,9 @@
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_tx_queue *txq = priv->txq + index;
+ if (txq->txd == NULL)
+ return;
+
mwl8k_txq_reclaim(hw, index, INT_MAX, 1);
kfree(txq->skb);
@@ -1572,12 +1702,116 @@
txq->txd = NULL;
}
+/* caller must hold priv->stream_lock when calling the stream functions */
+static struct mwl8k_ampdu_stream *
+mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid)
+{
+ struct mwl8k_ampdu_stream *stream;
+ struct mwl8k_priv *priv = hw->priv;
+ int i;
+
+ for (i = 0; i < priv->num_ampdu_queues; i++) {
+ stream = &priv->ampdu[i];
+ if (stream->state == AMPDU_NO_STREAM) {
+ stream->sta = sta;
+ stream->state = AMPDU_STREAM_NEW;
+ stream->tid = tid;
+ stream->idx = i;
+ stream->txq_idx = MWL8K_TX_WMM_QUEUES + i;
+ wiphy_debug(hw->wiphy, "Added a new stream for %pM %d",
+ sta->addr, tid);
+ return stream;
+ }
+ }
+ return NULL;
+}
+
+static int
+mwl8k_start_stream(struct ieee80211_hw *hw, struct mwl8k_ampdu_stream *stream)
+{
+ int ret;
+
+ /* if the stream has already been started, don't start it again */
+ if (stream->state != AMPDU_STREAM_NEW)
+ return 0;
+ ret = ieee80211_start_tx_ba_session(stream->sta, stream->tid, 0);
+ if (ret)
+ wiphy_debug(hw->wiphy, "Failed to start stream for %pM %d: "
+ "%d\n", stream->sta->addr, stream->tid, ret);
+ else
+ wiphy_debug(hw->wiphy, "Started stream for %pM %d\n",
+ stream->sta->addr, stream->tid);
+ return ret;
+}
+
+static void
+mwl8k_remove_stream(struct ieee80211_hw *hw, struct mwl8k_ampdu_stream *stream)
+{
+ wiphy_debug(hw->wiphy, "Remove stream for %pM %d\n", stream->sta->addr,
+ stream->tid);
+ memset(stream, 0, sizeof(*stream));
+}
+
+static struct mwl8k_ampdu_stream *
+mwl8k_lookup_stream(struct ieee80211_hw *hw, u8 *addr, u8 tid)
+{
+ struct mwl8k_priv *priv = hw->priv;
+ int i;
+
+ for (i = 0 ; i < priv->num_ampdu_queues; i++) {
+ struct mwl8k_ampdu_stream *stream;
+ stream = &priv->ampdu[i];
+ if (stream->state == AMPDU_NO_STREAM)
+ continue;
+ if (!memcmp(stream->sta->addr, addr, ETH_ALEN) &&
+ stream->tid == tid)
+ return stream;
+ }
+ return NULL;
+}
+
+#define MWL8K_AMPDU_PACKET_THRESHOLD 64
+static inline bool mwl8k_ampdu_allowed(struct ieee80211_sta *sta, u8 tid)
+{
+ struct mwl8k_sta *sta_info = MWL8K_STA(sta);
+ struct tx_traffic_info *tx_stats;
+
+ BUG_ON(tid >= MWL8K_MAX_TID);
+ tx_stats = &sta_info->tx_stats[tid];
+
+ return sta_info->is_ampdu_allowed &&
+ tx_stats->pkts > MWL8K_AMPDU_PACKET_THRESHOLD;
+}
+
+static inline void mwl8k_tx_count_packet(struct ieee80211_sta *sta, u8 tid)
+{
+ struct mwl8k_sta *sta_info = MWL8K_STA(sta);
+ struct tx_traffic_info *tx_stats;
+
+ BUG_ON(tid >= MWL8K_MAX_TID);
+ tx_stats = &sta_info->tx_stats[tid];
+
+ if (tx_stats->start_time == 0)
+ tx_stats->start_time = jiffies;
+
+ /* reset the packet count after each second elapses. If the number of
+ * packets ever exceeds the ampdu_min_traffic threshold, we will allow
+ * an ampdu stream to be started.
+ */
+ if (jiffies - tx_stats->start_time > HZ) {
+ tx_stats->pkts = 0;
+ tx_stats->start_time = 0;
+ } else
+ tx_stats->pkts++;
+}
+
static void
mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
{
struct mwl8k_priv *priv = hw->priv;
struct ieee80211_tx_info *tx_info;
struct mwl8k_vif *mwl8k_vif;
+ struct ieee80211_sta *sta;
struct ieee80211_hdr *wh;
struct mwl8k_tx_queue *txq;
struct mwl8k_tx_desc *tx;
@@ -1585,6 +1819,12 @@
u32 txstatus;
u8 txdatarate;
u16 qos;
+ int txpriority;
+ u8 tid = 0;
+ struct mwl8k_ampdu_stream *stream = NULL;
+ bool start_ba_session = false;
+ bool mgmtframe = false;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
wh = (struct ieee80211_hdr *)skb->data;
if (ieee80211_is_data_qos(wh->frame_control))
@@ -1592,14 +1832,18 @@
else
qos = 0;
+ if (ieee80211_is_mgmt(wh->frame_control))
+ mgmtframe = true;
+
if (priv->ap_fw)
- mwl8k_encapsulate_tx_frame(skb);
+ mwl8k_encapsulate_tx_frame(priv, skb);
else
- mwl8k_add_dma_header(skb, 0);
+ mwl8k_add_dma_header(priv, skb, 0, 0);
wh = &((struct mwl8k_dma_data *)skb->data)->wh;
tx_info = IEEE80211_SKB_CB(skb);
+ sta = tx_info->control.sta;
mwl8k_vif = MWL8K_VIF(tx_info->control.vif);
if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
@@ -1627,12 +1871,91 @@
qos |= MWL8K_QOS_ACK_POLICY_NORMAL;
}
+ /* Queue ADDBA request in the respective data queue. While setting up
+ * the ampdu stream, mac80211 queues further packets for that
+ * particular ra/tid pair. However, packets piled up in the hardware
+ * for that ra/tid pair will still go out. ADDBA request and the
+ * related data packets going out from different queues asynchronously
+ * will cause a shift in the receiver window which might result in
+ * ampdu packets getting dropped at the receiver after the stream has
+ * been setup.
+ */
+ if (unlikely(ieee80211_is_action(wh->frame_control) &&
+ mgmt->u.action.category == WLAN_CATEGORY_BACK &&
+ mgmt->u.action.u.addba_req.action_code == WLAN_ACTION_ADDBA_REQ &&
+ priv->ap_fw)) {
+ u16 capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
+ tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
+ index = mwl8k_tid_queue_mapping(tid);
+ }
+
+ txpriority = index;
+
+ if (ieee80211_is_data_qos(wh->frame_control) &&
+ skb->protocol != cpu_to_be16(ETH_P_PAE) &&
+ sta->ht_cap.ht_supported && priv->ap_fw) {
+ tid = qos & 0xf;
+ mwl8k_tx_count_packet(sta, tid);
+ spin_lock(&priv->stream_lock);
+ stream = mwl8k_lookup_stream(hw, sta->addr, tid);
+ if (stream != NULL) {
+ if (stream->state == AMPDU_STREAM_ACTIVE) {
+ txpriority = stream->txq_idx;
+ index = stream->txq_idx;
+ } else if (stream->state == AMPDU_STREAM_NEW) {
+ /* We get here if the driver sends us packets
+ * after we've initiated a stream, but before
+ * our ampdu_action routine has been called
+ * with IEEE80211_AMPDU_TX_START to get the SSN
+ * for the ADDBA request. So this packet can
+ * go out with no risk of sequence number
+ * mismatch. No special handling is required.
+ */
+ } else {
+ /* Drop packets that would go out after the
+ * ADDBA request was sent but before the ADDBA
+ * response is received. If we don't do this,
+ * the recipient would probably receive it
+ * after the ADDBA request with SSN 0. This
+ * will cause the recipient's BA receive window
+ * to shift, which would cause the subsequent
+ * packets in the BA stream to be discarded.
+ * mac80211 queues our packets for us in this
+ * case, so this is really just a safety check.
+ */
+ wiphy_warn(hw->wiphy,
+ "Cannot send packet while ADDBA "
+ "dialog is underway.\n");
+ spin_unlock(&priv->stream_lock);
+ dev_kfree_skb(skb);
+ return;
+ }
+ } else {
+ /* Defer calling mwl8k_start_stream so that the current
+ * skb can go out before the ADDBA request. This
+ * prevents sequence number mismatch at the recepient
+ * as described above.
+ */
+ if (mwl8k_ampdu_allowed(sta, tid)) {
+ stream = mwl8k_add_stream(hw, sta, tid);
+ if (stream != NULL)
+ start_ba_session = true;
+ }
+ }
+ spin_unlock(&priv->stream_lock);
+ }
+
dma = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(priv->pdev, dma)) {
wiphy_debug(hw->wiphy,
"failed to dma map skb, dropping TX frame.\n");
+ if (start_ba_session) {
+ spin_lock(&priv->stream_lock);
+ mwl8k_remove_stream(hw, stream);
+ spin_unlock(&priv->stream_lock);
+ }
dev_kfree_skb(skb);
return;
}
@@ -1641,12 +1964,34 @@
txq = priv->txq + index;
+ /* Mgmt frames that go out frequently are probe
+ * responses. Other mgmt frames got out relatively
+ * infrequently. Hence reserve 2 buffers so that
+ * other mgmt frames do not get dropped due to an
+ * already queued probe response in one of the
+ * reserved buffers.
+ */
+
+ if (txq->len >= MWL8K_TX_DESCS - 2) {
+ if (mgmtframe == false ||
+ txq->len == MWL8K_TX_DESCS) {
+ if (start_ba_session) {
+ spin_lock(&priv->stream_lock);
+ mwl8k_remove_stream(hw, stream);
+ spin_unlock(&priv->stream_lock);
+ }
+ spin_unlock_bh(&priv->tx_lock);
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
BUG_ON(txq->skb[txq->tail] != NULL);
txq->skb[txq->tail] = skb;
tx = txq->txd + txq->tail;
tx->data_rate = txdatarate;
- tx->tx_priority = index;
+ tx->tx_priority = txpriority;
tx->qos_control = cpu_to_le16(qos);
tx->pkt_phys_addr = cpu_to_le32(dma);
tx->pkt_len = cpu_to_le16(skb->len);
@@ -1655,6 +2000,11 @@
tx->peer_id = MWL8K_STA(tx_info->control.sta)->peer_id;
else
tx->peer_id = 0;
+
+ if (priv->ap_fw)
+ tx->timestamp = cpu_to_le32(ioread32(priv->regs +
+ MWL8K_HW_TIMER_REGISTER));
+
wmb();
tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
@@ -1665,12 +2015,17 @@
if (txq->tail == MWL8K_TX_DESCS)
txq->tail = 0;
- if (txq->head == txq->tail)
- ieee80211_stop_queue(hw, index);
-
mwl8k_tx_start(priv);
spin_unlock_bh(&priv->tx_lock);
+
+ /* Initiate the ampdu session here */
+ if (start_ba_session) {
+ spin_lock(&priv->stream_lock);
+ if (mwl8k_start_stream(hw, stream))
+ mwl8k_remove_stream(hw, stream);
+ spin_unlock(&priv->stream_lock);
+ }
}
@@ -1868,7 +2223,7 @@
__u8 mcs_bitmap[16];
__le32 rx_queue_ptr;
__le32 num_tx_queues;
- __le32 tx_queue_ptrs[MWL8K_TX_QUEUES];
+ __le32 tx_queue_ptrs[MWL8K_TX_WMM_QUEUES];
__le32 caps2;
__le32 num_tx_desc_per_queue;
__le32 total_rxd;
@@ -1974,8 +2329,8 @@
memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma);
- cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ cmd->num_tx_queues = cpu_to_le32(mwl8k_tx_queues(priv));
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma);
cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
@@ -2017,13 +2372,16 @@
__le32 wcbbase2;
__le32 wcbbase3;
__le32 fw_api_version;
+ __le32 caps;
+ __le32 num_of_ampdu_queues;
+ __le32 wcbbase_ampdu[MWL8K_MAX_AMPDU_QUEUES];
} __packed;
static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
{
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_cmd_get_hw_spec_ap *cmd;
- int rc;
+ int rc, i;
u32 api_version;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2055,27 +2413,31 @@
priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
priv->fw_rev = le32_to_cpu(cmd->fw_rev);
priv->hw_rev = cmd->hw_rev;
- mwl8k_setup_2ghz_band(hw);
+ mwl8k_set_caps(hw, le32_to_cpu(cmd->caps));
priv->ap_macids_supported = 0x000000ff;
priv->sta_macids_supported = 0x00000000;
-
- off = le32_to_cpu(cmd->wcbbase0) & 0xffff;
- iowrite32(priv->txq[0].txd_dma, priv->sram + off);
-
+ priv->num_ampdu_queues = le32_to_cpu(cmd->num_of_ampdu_queues);
+ if (priv->num_ampdu_queues > MWL8K_MAX_AMPDU_QUEUES) {
+ wiphy_warn(hw->wiphy, "fw reported %d ampdu queues"
+ " but we only support %d.\n",
+ priv->num_ampdu_queues,
+ MWL8K_MAX_AMPDU_QUEUES);
+ priv->num_ampdu_queues = MWL8K_MAX_AMPDU_QUEUES;
+ }
off = le32_to_cpu(cmd->rxwrptr) & 0xffff;
iowrite32(priv->rxq[0].rxd_dma, priv->sram + off);
off = le32_to_cpu(cmd->rxrdptr) & 0xffff;
iowrite32(priv->rxq[0].rxd_dma, priv->sram + off);
- off = le32_to_cpu(cmd->wcbbase1) & 0xffff;
- iowrite32(priv->txq[1].txd_dma, priv->sram + off);
+ priv->txq_offset[0] = le32_to_cpu(cmd->wcbbase0) & 0xffff;
+ priv->txq_offset[1] = le32_to_cpu(cmd->wcbbase1) & 0xffff;
+ priv->txq_offset[2] = le32_to_cpu(cmd->wcbbase2) & 0xffff;
+ priv->txq_offset[3] = le32_to_cpu(cmd->wcbbase3) & 0xffff;
- off = le32_to_cpu(cmd->wcbbase2) & 0xffff;
- iowrite32(priv->txq[2].txd_dma, priv->sram + off);
-
- off = le32_to_cpu(cmd->wcbbase3) & 0xffff;
- iowrite32(priv->txq[3].txd_dma, priv->sram + off);
+ for (i = 0; i < priv->num_ampdu_queues; i++)
+ priv->txq_offset[i + MWL8K_TX_WMM_QUEUES] =
+ le32_to_cpu(cmd->wcbbase_ampdu[i]) & 0xffff;
}
done:
@@ -2098,12 +2460,20 @@
__le32 caps;
__le32 rx_queue_ptr;
__le32 num_tx_queues;
- __le32 tx_queue_ptrs[MWL8K_TX_QUEUES];
+ __le32 tx_queue_ptrs[MWL8K_MAX_TX_QUEUES];
__le32 flags;
__le32 num_tx_desc_per_queue;
__le32 total_rxd;
} __packed;
+/* If enabled, MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY will cause
+ * packets to expire 500 ms after the timestamp in the tx descriptor. That is,
+ * the packets that are queued for more than 500ms, will be dropped in the
+ * hardware. This helps minimizing the issues caused due to head-of-line
+ * blocking where a slow client can hog the bandwidth and affect traffic to a
+ * faster client.
+ */
+#define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400
#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080
#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020
#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010
@@ -2124,7 +2494,7 @@
cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma);
- cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
+ cmd->num_tx_queues = cpu_to_le32(mwl8k_tx_queues(priv));
/*
* Mac80211 stack has Q0 as highest priority and Q3 as lowest in
@@ -2132,14 +2502,15 @@
* in that order. Map Q3 of mac80211 to Q0 of firmware so that the
* priority is interpreted the right way in firmware.
*/
- for (i = 0; i < MWL8K_TX_QUEUES; i++) {
- int j = MWL8K_TX_QUEUES - 1 - i;
+ for (i = 0; i < mwl8k_tx_queues(priv); i++) {
+ int j = mwl8k_tx_queues(priv) - 1 - i;
cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[j].txd_dma);
}
cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT |
MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP |
- MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON);
+ MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON |
+ MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY);
cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
@@ -2356,7 +2727,7 @@
__le16 bw;
__le16 sub_ch;
__le16 power_level_list[MWL8K_TX_POWER_LEVEL_TOTAL];
-} __attribute__((packed));
+} __packed;
static int mwl8k_cmd_tx_power(struct ieee80211_hw *hw,
struct ieee80211_conf *conf,
@@ -3123,6 +3494,65 @@
}
/*
+ * CMD_GET_WATCHDOG_BITMAP.
+ */
+struct mwl8k_cmd_get_watchdog_bitmap {
+ struct mwl8k_cmd_pkt header;
+ u8 bitmap;
+} __packed;
+
+static int mwl8k_cmd_get_watchdog_bitmap(struct ieee80211_hw *hw, u8 *bitmap)
+{
+ struct mwl8k_cmd_get_watchdog_bitmap *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_WATCHDOG_BITMAP);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ if (!rc)
+ *bitmap = cmd->bitmap;
+
+ kfree(cmd);
+
+ return rc;
+}
+
+#define INVALID_BA 0xAA
+static void mwl8k_watchdog_ba_events(struct work_struct *work)
+{
+ int rc;
+ u8 bitmap = 0, stream_index;
+ struct mwl8k_ampdu_stream *streams;
+ struct mwl8k_priv *priv =
+ container_of(work, struct mwl8k_priv, watchdog_ba_handle);
+
+ rc = mwl8k_cmd_get_watchdog_bitmap(priv->hw, &bitmap);
+ if (rc)
+ return;
+
+ if (bitmap == INVALID_BA)
+ return;
+
+ /* the bitmap is the hw queue number. Map it to the ampdu queue. */
+ stream_index = bitmap - MWL8K_TX_WMM_QUEUES;
+
+ BUG_ON(stream_index >= priv->num_ampdu_queues);
+
+ streams = &priv->ampdu[stream_index];
+
+ if (streams->state == AMPDU_STREAM_ACTIVE)
+ ieee80211_stop_tx_ba_session(streams->sta, streams->tid);
+
+ return;
+}
+
+
+/*
* CMD_BSS_START.
*/
struct mwl8k_cmd_bss_start {
@@ -3151,6 +3581,152 @@
}
/*
+ * CMD_BASTREAM.
+ */
+
+/*
+ * UPSTREAM is tx direction
+ */
+#define BASTREAM_FLAG_DIRECTION_UPSTREAM 0x00
+#define BASTREAM_FLAG_IMMEDIATE_TYPE 0x01
+
+enum ba_stream_action_type {
+ MWL8K_BA_CREATE,
+ MWL8K_BA_UPDATE,
+ MWL8K_BA_DESTROY,
+ MWL8K_BA_FLUSH,
+ MWL8K_BA_CHECK,
+};
+
+
+struct mwl8k_create_ba_stream {
+ __le32 flags;
+ __le32 idle_thrs;
+ __le32 bar_thrs;
+ __le32 window_size;
+ u8 peer_mac_addr[6];
+ u8 dialog_token;
+ u8 tid;
+ u8 queue_id;
+ u8 param_info;
+ __le32 ba_context;
+ u8 reset_seq_no_flag;
+ __le16 curr_seq_no;
+ u8 sta_src_mac_addr[6];
+} __packed;
+
+struct mwl8k_destroy_ba_stream {
+ __le32 flags;
+ __le32 ba_context;
+} __packed;
+
+struct mwl8k_cmd_bastream {
+ struct mwl8k_cmd_pkt header;
+ __le32 action;
+ union {
+ struct mwl8k_create_ba_stream create_params;
+ struct mwl8k_destroy_ba_stream destroy_params;
+ };
+} __packed;
+
+static int
+mwl8k_check_ba(struct ieee80211_hw *hw, struct mwl8k_ampdu_stream *stream)
+{
+ struct mwl8k_cmd_bastream *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_BASTREAM);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+ cmd->action = cpu_to_le32(MWL8K_BA_CHECK);
+
+ cmd->create_params.queue_id = stream->idx;
+ memcpy(&cmd->create_params.peer_mac_addr[0], stream->sta->addr,
+ ETH_ALEN);
+ cmd->create_params.tid = stream->tid;
+
+ cmd->create_params.flags =
+ cpu_to_le32(BASTREAM_FLAG_IMMEDIATE_TYPE) |
+ cpu_to_le32(BASTREAM_FLAG_DIRECTION_UPSTREAM);
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+
+ kfree(cmd);
+
+ return rc;
+}
+
+static int
+mwl8k_create_ba(struct ieee80211_hw *hw, struct mwl8k_ampdu_stream *stream,
+ u8 buf_size)
+{
+ struct mwl8k_cmd_bastream *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_BASTREAM);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+ cmd->action = cpu_to_le32(MWL8K_BA_CREATE);
+
+ cmd->create_params.bar_thrs = cpu_to_le32((u32)buf_size);
+ cmd->create_params.window_size = cpu_to_le32((u32)buf_size);
+ cmd->create_params.queue_id = stream->idx;
+
+ memcpy(cmd->create_params.peer_mac_addr, stream->sta->addr, ETH_ALEN);
+ cmd->create_params.tid = stream->tid;
+ cmd->create_params.curr_seq_no = cpu_to_le16(0);
+ cmd->create_params.reset_seq_no_flag = 1;
+
+ cmd->create_params.param_info =
+ (stream->sta->ht_cap.ampdu_factor &
+ IEEE80211_HT_AMPDU_PARM_FACTOR) |
+ ((stream->sta->ht_cap.ampdu_density << 2) &
+ IEEE80211_HT_AMPDU_PARM_DENSITY);
+
+ cmd->create_params.flags =
+ cpu_to_le32(BASTREAM_FLAG_IMMEDIATE_TYPE |
+ BASTREAM_FLAG_DIRECTION_UPSTREAM);
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+
+ wiphy_debug(hw->wiphy, "Created a BA stream for %pM : tid %d\n",
+ stream->sta->addr, stream->tid);
+ kfree(cmd);
+
+ return rc;
+}
+
+static void mwl8k_destroy_ba(struct ieee80211_hw *hw,
+ struct mwl8k_ampdu_stream *stream)
+{
+ struct mwl8k_cmd_bastream *cmd;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_BASTREAM);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ cmd->action = cpu_to_le32(MWL8K_BA_DESTROY);
+
+ cmd->destroy_params.ba_context = cpu_to_le32(stream->idx);
+ mwl8k_post_cmd(hw, &cmd->header);
+
+ wiphy_debug(hw->wiphy, "Deleted BA stream index %d\n", stream->idx);
+
+ kfree(cmd);
+}
+
+/*
* CMD_SET_NEW_STN.
*/
struct mwl8k_cmd_set_new_stn {
@@ -3274,7 +3850,7 @@
__u8 mac_addr[6];
__u8 encr_type;
-} __attribute__((packed));
+} __packed;
struct mwl8k_cmd_set_key {
struct mwl8k_cmd_pkt header;
@@ -3294,7 +3870,7 @@
__le16 tkip_tsc_low;
__le32 tkip_tsc_high;
__u8 mac_addr[6];
-} __attribute__((packed));
+} __packed;
enum {
MWL8K_ENCR_ENABLE,
@@ -3422,7 +3998,7 @@
mwl8k_vif->wep_key_conf[idx].enabled = 1;
}
- keymlen = 0;
+ keymlen = key->keylen;
action = MWL8K_ENCR_SET_KEY;
break;
case WLAN_CIPHER_SUITE_TKIP:
@@ -3496,7 +4072,6 @@
addr = sta->addr;
if (cmd_param == SET_KEY) {
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
rc = mwl8k_cmd_encryption_set_key(hw, vif, addr, key);
if (rc)
goto out;
@@ -3671,6 +4246,11 @@
tasklet_schedule(&priv->poll_rx_task);
}
+ if (status & MWL8K_A2H_INT_BA_WATCHDOG) {
+ status &= ~MWL8K_A2H_INT_BA_WATCHDOG;
+ ieee80211_queue_work(hw, &priv->watchdog_ba_handle);
+ }
+
if (status)
iowrite32(~status, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
@@ -3699,7 +4279,7 @@
spin_lock_bh(&priv->tx_lock);
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
limit -= mwl8k_txq_reclaim(hw, i, limit, 0);
if (!priv->pending_tx_pkts && priv->tx_wait != NULL) {
@@ -3774,6 +4354,8 @@
/* Enable interrupts */
iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
+ iowrite32(MWL8K_A2H_EVENTS,
+ priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
rc = mwl8k_fw_lock(hw);
if (!rc) {
@@ -3829,6 +4411,7 @@
/* Stop finalize join worker */
cancel_work_sync(&priv->finalize_join_worker);
+ cancel_work_sync(&priv->watchdog_ba_handle);
if (priv->beacon_skb != NULL)
dev_kfree_skb(priv->beacon_skb);
@@ -3837,7 +4420,7 @@
tasklet_disable(&priv->poll_rx_task);
/* Return all skbs to mac80211 */
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
mwl8k_txq_reclaim(hw, i, INT_MAX, 1);
}
@@ -3958,9 +4541,12 @@
conf->power_level = 18;
if (priv->ap_fw) {
- rc = mwl8k_cmd_tx_power(hw, conf, conf->power_level);
- if (rc)
- goto out;
+
+ if (conf->flags & IEEE80211_CONF_CHANGE_POWER) {
+ rc = mwl8k_cmd_tx_power(hw, conf, conf->power_level);
+ if (rc)
+ goto out;
+ }
rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x3);
if (rc)
@@ -3987,7 +4573,7 @@
struct ieee80211_bss_conf *info, u32 changed)
{
struct mwl8k_priv *priv = hw->priv;
- u32 ap_legacy_rates;
+ u32 ap_legacy_rates = 0;
u8 ap_mcs_rates[16];
int rc;
@@ -4312,6 +4898,8 @@
ret = mwl8k_cmd_update_stadb_add(hw, vif, sta);
if (ret >= 0) {
MWL8K_STA(sta)->peer_id = ret;
+ if (sta->ht_cap.ht_supported)
+ MWL8K_STA(sta)->is_ampdu_allowed = true;
ret = 0;
}
@@ -4335,14 +4923,14 @@
rc = mwl8k_fw_lock(hw);
if (!rc) {
- BUG_ON(queue > MWL8K_TX_QUEUES - 1);
+ BUG_ON(queue > MWL8K_TX_WMM_QUEUES - 1);
memcpy(&priv->wmm_params[queue], params, sizeof(*params));
if (!priv->wmm_enabled)
rc = mwl8k_cmd_set_wmm_mode(hw, 1);
if (!rc) {
- int q = MWL8K_TX_QUEUES - 1 - queue;
+ int q = MWL8K_TX_WMM_QUEUES - 1 - queue;
rc = mwl8k_cmd_set_edca_params(hw, q,
params->cw_min,
params->cw_max,
@@ -4378,21 +4966,118 @@
return 0;
}
+#define MAX_AMPDU_ATTEMPTS 5
+
static int
mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
u8 buf_size)
{
+
+ int i, rc = 0;
+ struct mwl8k_priv *priv = hw->priv;
+ struct mwl8k_ampdu_stream *stream;
+ u8 *addr = sta->addr;
+
+ if (!(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
+ return -ENOTSUPP;
+
+ spin_lock(&priv->stream_lock);
+ stream = mwl8k_lookup_stream(hw, addr, tid);
+
switch (action) {
case IEEE80211_AMPDU_RX_START:
case IEEE80211_AMPDU_RX_STOP:
- if (!(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
- return -ENOTSUPP;
- return 0;
+ break;
+ case IEEE80211_AMPDU_TX_START:
+ /* By the time we get here the hw queues may contain outgoing
+ * packets for this RA/TID that are not part of this BA
+ * session. The hw will assign sequence numbers to these
+ * packets as they go out. So if we query the hw for its next
+ * sequence number and use that for the SSN here, it may end up
+ * being wrong, which will lead to sequence number mismatch at
+ * the recipient. To avoid this, we reset the sequence number
+ * to O for the first MPDU in this BA stream.
+ */
+ *ssn = 0;
+ if (stream == NULL) {
+ /* This means that somebody outside this driver called
+ * ieee80211_start_tx_ba_session. This is unexpected
+ * because we do our own rate control. Just warn and
+ * move on.
+ */
+ wiphy_warn(hw->wiphy, "Unexpected call to %s. "
+ "Proceeding anyway.\n", __func__);
+ stream = mwl8k_add_stream(hw, sta, tid);
+ }
+ if (stream == NULL) {
+ wiphy_debug(hw->wiphy, "no free AMPDU streams\n");
+ rc = -EBUSY;
+ break;
+ }
+ stream->state = AMPDU_STREAM_IN_PROGRESS;
+
+ /* Release the lock before we do the time consuming stuff */
+ spin_unlock(&priv->stream_lock);
+ for (i = 0; i < MAX_AMPDU_ATTEMPTS; i++) {
+ rc = mwl8k_check_ba(hw, stream);
+
+ if (!rc)
+ break;
+ /*
+ * HW queues take time to be flushed, give them
+ * sufficient time
+ */
+
+ msleep(1000);
+ }
+ spin_lock(&priv->stream_lock);
+ if (rc) {
+ wiphy_err(hw->wiphy, "Stream for tid %d busy after %d"
+ " attempts\n", tid, MAX_AMPDU_ATTEMPTS);
+ mwl8k_remove_stream(hw, stream);
+ rc = -EBUSY;
+ break;
+ }
+ ieee80211_start_tx_ba_cb_irqsafe(vif, addr, tid);
+ break;
+ case IEEE80211_AMPDU_TX_STOP:
+ if (stream == NULL)
+ break;
+ if (stream->state == AMPDU_STREAM_ACTIVE) {
+ spin_unlock(&priv->stream_lock);
+ mwl8k_destroy_ba(hw, stream);
+ spin_lock(&priv->stream_lock);
+ }
+ mwl8k_remove_stream(hw, stream);
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, addr, tid);
+ break;
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ BUG_ON(stream == NULL);
+ BUG_ON(stream->state != AMPDU_STREAM_IN_PROGRESS);
+ spin_unlock(&priv->stream_lock);
+ rc = mwl8k_create_ba(hw, stream, buf_size);
+ spin_lock(&priv->stream_lock);
+ if (!rc)
+ stream->state = AMPDU_STREAM_ACTIVE;
+ else {
+ spin_unlock(&priv->stream_lock);
+ mwl8k_destroy_ba(hw, stream);
+ spin_lock(&priv->stream_lock);
+ wiphy_debug(hw->wiphy,
+ "Failed adding stream for sta %pM tid %d\n",
+ addr, tid);
+ mwl8k_remove_stream(hw, stream);
+ }
+ break;
+
default:
- return -ENOTSUPP;
+ rc = -ENOTSUPP;
}
+
+ spin_unlock(&priv->stream_lock);
+ return rc;
}
static const struct ieee80211_ops mwl8k_ops = {
@@ -4441,7 +5126,7 @@
MWL8366,
};
-#define MWL8K_8366_AP_FW_API 1
+#define MWL8K_8366_AP_FW_API 2
#define _MWL8K_8366_AP_FW(api) "mwl8k/fmimage_8366_ap-" #api ".fw"
#define MWL8K_8366_AP_FW(api) _MWL8K_8366_AP_FW(api)
@@ -4607,6 +5292,23 @@
return rc;
}
+static int mwl8k_init_txqs(struct ieee80211_hw *hw)
+{
+ struct mwl8k_priv *priv = hw->priv;
+ int rc = 0;
+ int i;
+
+ for (i = 0; i < mwl8k_tx_queues(priv); i++) {
+ rc = mwl8k_txq_init(hw, i);
+ if (rc)
+ break;
+ if (priv->ap_fw)
+ iowrite32(priv->txq[i].txd_dma,
+ priv->sram + priv->txq_offset[i]);
+ }
+ return rc;
+}
+
/* initialize hw after successfully loading a firmware image */
static int mwl8k_probe_hw(struct ieee80211_hw *hw)
{
@@ -4634,17 +5336,26 @@
goto err_stop_firmware;
rxq_refill(hw, 0, INT_MAX);
- for (i = 0; i < MWL8K_TX_QUEUES; i++) {
- rc = mwl8k_txq_init(hw, i);
+ /* For the sta firmware, we need to know the dma addresses of tx queues
+ * before sending MWL8K_CMD_GET_HW_SPEC. So we must initialize them
+ * prior to issuing this command. But for the AP case, we learn the
+ * total number of queues from the result CMD_GET_HW_SPEC, so for this
+ * case we must initialize the tx queues after.
+ */
+ priv->num_ampdu_queues = 0;
+ if (!priv->ap_fw) {
+ rc = mwl8k_init_txqs(hw);
if (rc)
goto err_free_queues;
}
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- iowrite32(MWL8K_A2H_INT_TX_DONE | MWL8K_A2H_INT_RX_READY,
+ iowrite32(MWL8K_A2H_INT_TX_DONE|MWL8K_A2H_INT_RX_READY|
+ MWL8K_A2H_INT_BA_WATCHDOG,
priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL);
- iowrite32(0xffffffff, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
+ iowrite32(MWL8K_A2H_INT_OPC_DONE,
+ priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
@@ -4653,6 +5364,8 @@
goto err_free_queues;
}
+ memset(priv->ampdu, 0, sizeof(priv->ampdu));
+
/*
* Temporarily enable interrupts. Initial firmware host
* commands use interrupts and avoid polling. Disable
@@ -4664,6 +5377,8 @@
if (priv->ap_fw) {
rc = mwl8k_cmd_get_hw_spec_ap(hw);
if (!rc)
+ rc = mwl8k_init_txqs(hw);
+ if (!rc)
rc = mwl8k_cmd_set_hw_spec(hw);
} else {
rc = mwl8k_cmd_get_hw_spec_sta(hw);
@@ -4705,7 +5420,7 @@
free_irq(priv->pdev->irq, hw);
err_free_queues:
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
mwl8k_txq_deinit(hw, i);
mwl8k_rxq_deinit(hw, 0);
@@ -4727,7 +5442,7 @@
mwl8k_stop(hw);
mwl8k_rxq_deinit(hw, 0);
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
mwl8k_txq_deinit(hw, i);
rc = mwl8k_init_firmware(hw, fw_image, false);
@@ -4746,7 +5461,7 @@
if (rc)
goto fail;
- for (i = 0; i < MWL8K_TX_QUEUES; i++) {
+ for (i = 0; i < MWL8K_TX_WMM_QUEUES; i++) {
rc = mwl8k_conf_tx(hw, i, &priv->wmm_params[i]);
if (rc)
goto fail;
@@ -4778,9 +5493,11 @@
hw->extra_tx_headroom =
sizeof(struct mwl8k_dma_data) - sizeof(struct ieee80211_cts);
+ hw->extra_tx_headroom -= priv->ap_fw ? REDUCED_TX_HEADROOM : 0;
+
hw->channel_change_time = 10;
- hw->queues = MWL8K_TX_QUEUES;
+ hw->queues = MWL8K_TX_WMM_QUEUES;
/* Set rssi values to dBm */
hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_HAS_RATE_CONTROL;
@@ -4796,6 +5513,8 @@
/* Finalize join worker */
INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
+ /* Handle watchdog ba events */
+ INIT_WORK(&priv->watchdog_ba_handle, mwl8k_watchdog_ba_events);
/* TX reclaim and RX tasklets. */
tasklet_init(&priv->poll_tx_task, mwl8k_tx_poll, (unsigned long)hw);
@@ -4815,6 +5534,8 @@
spin_lock_init(&priv->tx_lock);
+ spin_lock_init(&priv->stream_lock);
+
priv->tx_wait = NULL;
rc = mwl8k_probe_hw(hw);
@@ -4836,7 +5557,7 @@
return 0;
err_unprobe_hw:
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
mwl8k_txq_deinit(hw, i);
mwl8k_rxq_deinit(hw, 0);
@@ -4995,10 +5716,10 @@
mwl8k_hw_reset(priv);
/* Return all skbs to mac80211 */
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
mwl8k_txq_reclaim(hw, i, INT_MAX, 1);
- for (i = 0; i < MWL8K_TX_QUEUES; i++)
+ for (i = 0; i < mwl8k_tx_queues(priv); i++)
mwl8k_txq_deinit(hw, i);
mwl8k_rxq_deinit(hw, 0);
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 13d750d..54cc0bb 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -491,7 +491,7 @@
struct pda_rssi_cal_entry *cal = (void *) &data[offset];
for (i = 0; i < entries; i++) {
- u16 freq;
+ u16 freq = 0;
switch (i) {
case IEEE80211_BAND_2GHZ:
freq = 2437;
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index 2fab7d2..b6a061c 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -727,3 +727,34 @@
p54_tx(priv, skb);
return 0;
}
+
+int p54_set_groupfilter(struct p54_common *priv)
+{
+ struct p54_group_address_table *grp;
+ struct sk_buff *skb;
+ bool on = false;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*grp),
+ P54_CONTROL_TYPE_GROUP_ADDRESS_TABLE, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ grp = (struct p54_group_address_table *)skb_put(skb, sizeof(*grp));
+
+ on = !(priv->filter_flags & FIF_ALLMULTI) &&
+ (priv->mc_maclist_num > 0 &&
+ priv->mc_maclist_num <= MC_FILTER_ADDRESS_NUM);
+
+ if (on) {
+ grp->filter_enable = cpu_to_le16(1);
+ grp->num_address = cpu_to_le16(priv->mc_maclist_num);
+ memcpy(grp->mac_list, priv->mc_maclist, sizeof(grp->mac_list));
+ } else {
+ grp->filter_enable = cpu_to_le16(0);
+ grp->num_address = cpu_to_le16(0);
+ memset(grp->mac_list, 0, sizeof(grp->mac_list));
+ }
+
+ p54_tx(priv, skb);
+ return 0;
+}
diff --git a/drivers/net/wireless/p54/lmac.h b/drivers/net/wireless/p54/lmac.h
index eb581ab..3d8d622 100644
--- a/drivers/net/wireless/p54/lmac.h
+++ b/drivers/net/wireless/p54/lmac.h
@@ -540,6 +540,7 @@
int p54_setup_mac(struct p54_common *priv);
int p54_set_ps(struct p54_common *priv);
int p54_fetch_statistics(struct p54_common *priv);
+int p54_set_groupfilter(struct p54_common *priv);
/* e/v DCF setup */
int p54_set_edcf(struct p54_common *priv);
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index a946991..a5a6d9e 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -308,6 +308,31 @@
return ret;
}
+static u64 p54_prepare_multicast(struct ieee80211_hw *dev,
+ struct netdev_hw_addr_list *mc_list)
+{
+ struct p54_common *priv = dev->priv;
+ struct netdev_hw_addr *ha;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(priv->mc_maclist) !=
+ ARRAY_SIZE(((struct p54_group_address_table *)NULL)->mac_list));
+ /*
+ * The first entry is reserved for the global broadcast MAC.
+ * Otherwise the firmware will drop it and ARP will no longer work.
+ */
+ i = 1;
+ priv->mc_maclist_num = netdev_hw_addr_list_count(mc_list) + i;
+ netdev_hw_addr_list_for_each(ha, mc_list) {
+ memcpy(&priv->mc_maclist[i], ha->addr, ETH_ALEN);
+ i++;
+ if (i >= ARRAY_SIZE(priv->mc_maclist))
+ break;
+ }
+
+ return 1; /* update */
+}
+
static void p54_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
@@ -316,12 +341,16 @@
struct p54_common *priv = dev->priv;
*total_flags &= FIF_PROMISC_IN_BSS |
+ FIF_ALLMULTI |
FIF_OTHER_BSS;
priv->filter_flags = *total_flags;
if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS))
p54_setup_mac(priv);
+
+ if (changed_flags & FIF_ALLMULTI || multicast)
+ p54_set_groupfilter(priv);
}
static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue,
@@ -591,6 +620,7 @@
.config = p54_config,
.flush = p54_flush,
.bss_info_changed = p54_bss_info_changed,
+ .prepare_multicast = p54_prepare_multicast,
.configure_filter = p54_configure_filter,
.conf_tx = p54_conf_tx,
.get_stats = p54_get_stats,
@@ -660,6 +690,7 @@
init_completion(&priv->beacon_comp);
INIT_DELAYED_WORK(&priv->work, p54_work);
+ memset(&priv->mc_maclist[0], ~0, ETH_ALEN);
return dev;
}
EXPORT_SYMBOL_GPL(p54_init_common);
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index 50730fc..799d05e 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -211,8 +211,10 @@
/* BBP/MAC state */
u8 mac_addr[ETH_ALEN];
u8 bssid[ETH_ALEN];
+ u8 mc_maclist[4][ETH_ALEN];
u16 wakeup_timer;
unsigned int filter_flags;
+ int mc_maclist_num;
int mode;
u32 tsf_low32, tsf_high32;
u32 basic_rate_mask;
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 0494d7b..1b75317 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -331,10 +331,9 @@
struct p54p_ring_control *ring_control = priv->ring_control;
struct p54p_desc *desc;
dma_addr_t mapping;
- u32 device_idx, idx, i;
+ u32 idx, i;
spin_lock_irqsave(&priv->lock, flags);
- device_idx = le32_to_cpu(ring_control->device_idx[1]);
idx = le32_to_cpu(ring_control->host_idx[1]);
i = idx % ARRAY_SIZE(ring_control->tx_data);
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index f630552..9def1e5 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -59,7 +59,6 @@
select RT2800_LIB
select RT2X00_LIB_PCI if PCI
select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
- select RT2X00_LIB_HT
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
@@ -74,17 +73,13 @@
if RT2800PCI
config RT2800PCI_RT33XX
- bool "rt2800pci - Include support for rt33xx devices (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- default n
+ bool "rt2800pci - Include support for rt33xx devices"
+ default y
---help---
This adds support for rt33xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT3390
- Support for these devices is non-functional at the moment and is
- intended for testers and developers.
-
config RT2800PCI_RT35XX
bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)"
depends on EXPERIMENTAL
@@ -98,17 +93,14 @@
intended for testers and developers.
config RT2800PCI_RT53XX
- bool "rt2800-pci - Include support for rt53xx devices (EXPERIMENTAL)"
+ bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
depends on EXPERIMENTAL
- default n
+ default y
---help---
This adds support for rt53xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT5390
- Support for these devices is non-functional at the moment and is
- intended for testers and developers.
-
endif
config RT2500USB
@@ -140,7 +132,6 @@
depends on USB
select RT2800_LIB
select RT2X00_LIB_USB
- select RT2X00_LIB_HT
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
@@ -153,17 +144,13 @@
if RT2800USB
config RT2800USB_RT33XX
- bool "rt2800usb - Include support for rt33xx devices (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- default n
+ bool "rt2800usb - Include support for rt33xx devices"
+ default y
---help---
This adds support for rt33xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT3370
- Support for these devices is non-functional at the moment and is
- intended for testers and developers.
-
config RT2800USB_RT35XX
bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)"
depends on EXPERIMENTAL
@@ -176,6 +163,15 @@
Support for these devices is non-functional at the moment and is
intended for testers and developers.
+config RT2800USB_RT53XX
+ bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ default y
+ ---help---
+ This adds support for rt53xx wireless chipset family to the
+ rt2800pci driver.
+ Supported chips: RT5370
+
config RT2800USB_UNKNOWN
bool "rt2800usb - Include support for unknown (USB) devices"
default n
@@ -207,9 +203,6 @@
config RT2X00_LIB
tristate
-config RT2X00_LIB_HT
- boolean
-
config RT2X00_LIB_FIRMWARE
boolean
select FW_LOADER
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 9713398..349d5b8 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -7,7 +7,6 @@
rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
-rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 329f328..937f9e8 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1314,8 +1314,8 @@
}
}
-static void rt2400pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_field32 irq_field)
+static inline void rt2400pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
{
u32 reg;
@@ -1368,8 +1368,10 @@
static void rt2400pci_rxdone_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- rt2x00pci_rxdone(rt2x00dev);
- rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
+ if (rt2x00pci_rxdone(rt2x00dev))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+ else
+ rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
}
static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
@@ -1534,13 +1536,13 @@
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Check if the BBP tuning should be enabled.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
- __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
return 0;
}
@@ -1638,9 +1640,9 @@
/*
* This device requires the atim queue and DMA-mapped skbs.
*/
- __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
+ __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
@@ -1718,6 +1720,9 @@
.tx_last_beacon = rt2400pci_tx_last_beacon,
.rfkill_poll = rt2x00mac_rfkill_poll,
.flush = rt2x00mac_flush,
+ .set_antenna = rt2x00mac_set_antenna,
+ .get_antenna = rt2x00mac_get_antenna,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
@@ -1738,6 +1743,7 @@
.start_queue = rt2400pci_start_queue,
.kick_queue = rt2400pci_kick_queue,
.stop_queue = rt2400pci_stop_queue,
+ .flush_queue = rt2x00pci_flush_queue,
.write_tx_desc = rt2400pci_write_tx_desc,
.write_beacon = rt2400pci_write_beacon,
.fill_rxdone = rt2400pci_fill_rxdone,
@@ -1799,10 +1805,11 @@
* RT2400pci module information.
*/
static DEFINE_PCI_DEVICE_TABLE(rt2400pci_device_table) = {
- { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0101) },
{ 0, }
};
+
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver.");
@@ -1810,10 +1817,16 @@
MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
MODULE_LICENSE("GPL");
+static int rt2400pci_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ return rt2x00pci_probe(pci_dev, &rt2400pci_ops);
+}
+
static struct pci_driver rt2400pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2400pci_device_table,
- .probe = rt2x00pci_probe,
+ .probe = rt2400pci_probe,
.remove = __devexit_p(rt2x00pci_remove),
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 5827787..d27d7b8 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1446,8 +1446,8 @@
}
}
-static void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_field32 irq_field)
+static inline void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
{
u32 reg;
@@ -1500,8 +1500,10 @@
static void rt2500pci_rxdone_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- rt2x00pci_rxdone(rt2x00dev);
- rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
+ if (rt2x00pci_rxdone(rt2x00dev))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+ else
+ rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
}
static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
@@ -1685,14 +1687,14 @@
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Check if the BBP tuning should be enabled.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
- __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
/*
* Read the RSSI <-> dBm offset information.
@@ -1956,9 +1958,9 @@
/*
* This device requires the atim queue and DMA-mapped skbs.
*/
- __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
+ __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
@@ -2011,6 +2013,9 @@
.tx_last_beacon = rt2500pci_tx_last_beacon,
.rfkill_poll = rt2x00mac_rfkill_poll,
.flush = rt2x00mac_flush,
+ .set_antenna = rt2x00mac_set_antenna,
+ .get_antenna = rt2x00mac_get_antenna,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
@@ -2031,6 +2036,7 @@
.start_queue = rt2500pci_start_queue,
.kick_queue = rt2500pci_kick_queue,
.stop_queue = rt2500pci_stop_queue,
+ .flush_queue = rt2x00pci_flush_queue,
.write_tx_desc = rt2500pci_write_tx_desc,
.write_beacon = rt2500pci_write_beacon,
.fill_rxdone = rt2500pci_fill_rxdone,
@@ -2092,7 +2098,7 @@
* RT2500pci module information.
*/
static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
- { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0201) },
{ 0, }
};
@@ -2103,10 +2109,16 @@
MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
MODULE_LICENSE("GPL");
+static int rt2500pci_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ return rt2x00pci_probe(pci_dev, &rt2500pci_ops);
+}
+
static struct pci_driver rt2500pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2500pci_device_table,
- .probe = rt2x00pci_probe,
+ .probe = rt2500pci_probe,
.remove = __devexit_p(rt2x00pci_remove),
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 979fe65..15237c2 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1519,7 +1519,7 @@
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Read the RSSI <-> dBm offset information.
@@ -1790,14 +1790,14 @@
/*
* This device requires the atim queue
*/
- __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
+ __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags);
if (!modparam_nohwcrypt) {
- __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags);
}
- __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
+ __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
@@ -1824,6 +1824,9 @@
.conf_tx = rt2x00mac_conf_tx,
.rfkill_poll = rt2x00mac_rfkill_poll,
.flush = rt2x00mac_flush,
+ .set_antenna = rt2x00mac_set_antenna,
+ .get_antenna = rt2x00mac_get_antenna,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
@@ -1905,58 +1908,54 @@
*/
static struct usb_device_id rt2500usb_device_table[] = {
/* ASUS */
- { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1706) },
+ { USB_DEVICE(0x0b05, 0x1707) },
/* Belkin */
- { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x050d, 0x7050) },
+ { USB_DEVICE(0x050d, 0x7051) },
/* Cisco Systems */
- { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
- /* CNet */
- { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x13b1, 0x000d) },
+ { USB_DEVICE(0x13b1, 0x0011) },
+ { USB_DEVICE(0x13b1, 0x001a) },
/* Conceptronic */
- { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c02) },
/* D-LINK */
- { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x2001, 0x3c00) },
/* Gigabyte */
- { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x1044, 0x8001) },
+ { USB_DEVICE(0x1044, 0x8007) },
/* Hercules */
- { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x06f8, 0xe000) },
/* Melco */
- { USB_DEVICE(0x0411, 0x005e), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0411, 0x005e) },
+ { USB_DEVICE(0x0411, 0x0066) },
+ { USB_DEVICE(0x0411, 0x0067) },
+ { USB_DEVICE(0x0411, 0x008b) },
+ { USB_DEVICE(0x0411, 0x0097) },
/* MSI */
- { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0db0, 0x6861) },
+ { USB_DEVICE(0x0db0, 0x6865) },
+ { USB_DEVICE(0x0db0, 0x6869) },
/* Ralink */
- { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
- { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x148f, 0x1706) },
+ { USB_DEVICE(0x148f, 0x2570) },
+ { USB_DEVICE(0x148f, 0x9020) },
/* Sagem */
- { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x079b, 0x004b) },
/* Siemens */
- { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0681, 0x3c06) },
/* SMC */
- { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0707, 0xee13) },
/* Spairon */
- { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x114b, 0x0110) },
/* SURECOM */
- { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0769, 0x11f3) },
/* Trust */
- { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0eb0, 0x9020) },
/* VTech */
- { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0f88, 0x3012) },
/* Zinwell */
- { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x5a57, 0x0260) },
{ 0, }
};
@@ -1967,10 +1966,16 @@
MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
MODULE_LICENSE("GPL");
+static int rt2500usb_probe(struct usb_interface *usb_intf,
+ const struct usb_device_id *id)
+{
+ return rt2x00usb_probe(usb_intf, &rt2500usb_ops);
+}
+
static struct usb_driver rt2500usb_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2500usb_device_table,
- .probe = rt2x00usb_probe,
+ .probe = rt2500usb_probe,
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 8fbc5fa..f67bc9b 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -51,6 +51,7 @@
* RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
* RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
* RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5370 2.4G 1T1R
* RF5390 2.4G 1T1R
*/
#define RF2820 0x0001
@@ -66,6 +67,7 @@
#define RF3320 0x000b
#define RF3322 0x000c
#define RF3853 0x000d
+#define RF5370 0x5370
#define RF5390 0x5390
/*
@@ -2104,6 +2106,59 @@
#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -4)
+ * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -3)
+ */
+#define EEPROM_TSSI_BOUND_BG1 0x0037
+#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -2)
+ * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -1)
+ */
+#define EEPROM_TSSI_BOUND_BG2 0x0038
+#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * REF: Reference TSSI value, no tx power changes needed
+ * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 1)
+ */
+#define EEPROM_TSSI_BOUND_BG3 0x0039
+#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 2)
+ * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 3)
+ */
+#define EEPROM_TSSI_BOUND_BG4 0x003a
+#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 4)
+ * AGC_STEP: Temperature compensation step.
+ */
+#define EEPROM_TSSI_BOUND_BG5 0x003b
+#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00)
+
+/*
* EEPROM TXPOWER 802.11A
*/
#define EEPROM_TXPOWER_A1 0x003c
@@ -2113,6 +2168,59 @@
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -4)
+ * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -3)
+ */
+#define EEPROM_TSSI_BOUND_A1 0x006a
+#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -2)
+ * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -1)
+ */
+#define EEPROM_TSSI_BOUND_A2 0x006b
+#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * REF: Reference TSSI value, no tx power changes needed
+ * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 1)
+ */
+#define EEPROM_TSSI_BOUND_A3 0x006c
+#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 2)
+ * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 3)
+ */
+#define EEPROM_TSSI_BOUND_A4 0x006d
+#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 4)
+ * AGC_STEP: Temperature compensation step.
+ */
+#define EEPROM_TSSI_BOUND_A5 0x006e
+#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00)
+
+/*
* EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
*/
#define EEPROM_TXPOWER_BYRATE 0x006f
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index dbf74d0..2a6aa85 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -687,6 +687,9 @@
mcs = real_mcs;
}
+ if (aggr == 1 || ampdu == 1)
+ __set_bit(TXDONE_AMPDU, &txdesc.flags);
+
/*
* Ralink has a retry mechanism using a global fallback
* table. We setup this fallback table to try the immediate
@@ -727,34 +730,20 @@
struct data_queue *queue;
struct queue_entry *entry;
u32 reg;
- u8 pid;
- int i;
+ u8 qid;
- /*
- * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
- * at most X times and also stop processing once the TX_STA_FIFO_VALID
- * flag is not set anymore.
- *
- * The legacy drivers use X=TX_RING_SIZE but state in a comment
- * that the TX_STA_FIFO stack has a size of 16. We stick to our
- * tx ring size for now.
- */
- for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
- rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®);
- if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
- break;
+ while (kfifo_get(&rt2x00dev->txstatus_fifo, ®)) {
- /*
- * Skip this entry when it contains an invalid
- * queue identication number.
+ /* TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus
+ * qid is guaranteed to be one of the TX QIDs
*/
- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
- if (pid >= QID_RX)
+ qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
+ queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
+ if (unlikely(!queue)) {
+ WARNING(rt2x00dev, "Got TX status for an unavailable "
+ "queue %u, dropping\n", qid);
continue;
-
- queue = rt2x00queue_get_tx_queue(rt2x00dev, pid);
- if (unlikely(!queue))
- continue;
+ }
/*
* Inside each queue, we process each entry in a chronological
@@ -946,25 +935,49 @@
unsigned int ledmode =
rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
EEPROM_FREQ_LED_MODE);
+ u32 reg;
- if (led->type == LED_TYPE_RADIO) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? 0x20 : 0);
- } else if (led->type == LED_TYPE_ASSOC) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
- } else if (led->type == LED_TYPE_QUALITY) {
- /*
- * The brightness is divided into 6 levels (0 - 5),
- * The specs tell us the following levels:
- * 0, 1 ,3, 7, 15, 31
- * to determine the level in a simple way we can simply
- * work with bitshifting:
- * (1 << level) - 1
- */
- rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
- (1 << brightness / (LED_FULL / 6)) - 1,
- polarity);
+ /* Check for SoC (SOC devices don't support MCU requests) */
+ if (rt2x00_is_soc(led->rt2x00dev)) {
+ rt2800_register_read(led->rt2x00dev, LED_CFG, ®);
+
+ /* Set LED Polarity */
+ rt2x00_set_field32(®, LED_CFG_LED_POLAR, polarity);
+
+ /* Set LED Mode */
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE,
+ enabled ? 3 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE,
+ enabled ? 3 : 0);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE,
+ enabled ? 3 : 0);
+ }
+
+ rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
+
+ } else {
+ if (led->type == LED_TYPE_RADIO) {
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? 0x20 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * The specs tell us the following levels:
+ * 0, 1 ,3, 7, 15, 31
+ * to determine the level in a simple way we can simply
+ * work with bitshifting:
+ * (1 << level) - 1
+ */
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ (1 << brightness / (LED_FULL / 6)) - 1,
+ polarity);
+ }
}
}
@@ -1218,6 +1231,25 @@
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ if (conf->sync == TSF_SYNC_AP_NONE) {
+ /*
+ * Tune beacon queue transmit parameters for AP mode
+ */
+ rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, ®);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 0);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 1);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 0);
+ rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
+ } else {
+ rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, ®);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 4);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 2);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
+ rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 16);
+ rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
+ }
}
if (flags & CONFIG_UPDATE_MAC) {
@@ -1608,7 +1640,6 @@
struct channel_info *info)
{
u8 rfcsr;
- u16 eeprom;
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
@@ -1638,11 +1669,10 @@
rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
if (rf->channel <= 14) {
int idx = rf->channel-1;
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) {
+ if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
/* r55/r59 value array of channel 1~14 */
static const char r55_bt_rev[] = {0x83, 0x83,
@@ -1721,7 +1751,8 @@
rt2x00_rf(rt2x00dev, RF3052) ||
rt2x00_rf(rt2x00dev, RF3320))
rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
- else if (rt2x00_rf(rt2x00dev, RF5390))
+ else if (rt2x00_rf(rt2x00dev, RF5370) ||
+ rt2x00_rf(rt2x00dev, RF5390))
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
else
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
@@ -1736,8 +1767,8 @@
if (rf->channel <= 14) {
if (!rt2x00_rt(rt2x00dev, RT5390)) {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG,
- &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_BG,
+ &rt2x00dev->cap_flags)) {
rt2800_bbp_write(rt2x00dev, 82, 0x62);
rt2800_bbp_write(rt2x00dev, 75, 0x46);
} else {
@@ -1748,7 +1779,7 @@
} else {
rt2800_bbp_write(rt2x00dev, 82, 0xf2);
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
rt2800_bbp_write(rt2x00dev, 75, 0x46);
else
rt2800_bbp_write(rt2x00dev, 75, 0x50);
@@ -1813,17 +1844,131 @@
rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, ®);
}
+static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
+{
+ u8 tssi_bounds[9];
+ u8 current_tssi;
+ u16 eeprom;
+ u8 step;
+ int i;
+
+ /*
+ * Read TSSI boundaries for temperature compensation from
+ * the EEPROM.
+ *
+ * Array idx 0 1 2 3 4 5 6 7 8
+ * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4
+ * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
+ */
+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom);
+ tssi_bounds[0] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG1_MINUS4);
+ tssi_bounds[1] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG1_MINUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom);
+ tssi_bounds[2] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG2_MINUS2);
+ tssi_bounds[3] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG2_MINUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom);
+ tssi_bounds[4] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG3_REF);
+ tssi_bounds[5] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG3_PLUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom);
+ tssi_bounds[6] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG4_PLUS2);
+ tssi_bounds[7] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG4_PLUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom);
+ tssi_bounds[8] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG5_PLUS4);
+
+ step = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_BG5_AGC_STEP);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom);
+ tssi_bounds[0] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A1_MINUS4);
+ tssi_bounds[1] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A1_MINUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom);
+ tssi_bounds[2] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A2_MINUS2);
+ tssi_bounds[3] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A2_MINUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom);
+ tssi_bounds[4] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A3_REF);
+ tssi_bounds[5] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A3_PLUS1);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom);
+ tssi_bounds[6] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A4_PLUS2);
+ tssi_bounds[7] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A4_PLUS3);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom);
+ tssi_bounds[8] = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A5_PLUS4);
+
+ step = rt2x00_get_field16(eeprom,
+ EEPROM_TSSI_BOUND_A5_AGC_STEP);
+ }
+
+ /*
+ * Check if temperature compensation is supported.
+ */
+ if (tssi_bounds[4] == 0xff)
+ return 0;
+
+ /*
+ * Read current TSSI (BBP 49).
+ */
+ rt2800_bbp_read(rt2x00dev, 49, ¤t_tssi);
+
+ /*
+ * Compare TSSI value (BBP49) with the compensation boundaries
+ * from the EEPROM and increase or decrease tx power.
+ */
+ for (i = 0; i <= 3; i++) {
+ if (current_tssi > tssi_bounds[i])
+ break;
+ }
+
+ if (i == 4) {
+ for (i = 8; i >= 5; i--) {
+ if (current_tssi < tssi_bounds[i])
+ break;
+ }
+ }
+
+ return (i - 4) * step;
+}
+
static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
enum ieee80211_band band)
{
u16 eeprom;
u8 comp_en;
u8 comp_type;
- int comp_value;
+ int comp_value = 0;
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
- if (eeprom == 0xffff)
+ /*
+ * HT40 compensation not required.
+ */
+ if (eeprom == 0xffff ||
+ !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
return 0;
if (band == IEEE80211_BAND_2GHZ) {
@@ -1853,11 +1998,9 @@
return comp_value;
}
-static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
- int is_rate_b,
- enum ieee80211_band band,
- int power_level,
- u8 txpower)
+static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
+ enum ieee80211_band band, int power_level,
+ u8 txpower, int delta)
{
u32 reg;
u16 eeprom;
@@ -1865,15 +2008,11 @@
u8 eirp_txpower;
u8 eirp_txpower_criterion;
u8 reg_limit;
- int bw_comp = 0;
if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
return txpower;
- if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
- bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
-
- if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) {
/*
* Check if eirp txpower exceed txpower_limit.
* We use OFDM 6M as criterion and its eirp txpower
@@ -1895,18 +2034,19 @@
EEPROM_EIRP_MAX_TX_POWER_5GHZ);
eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
- (is_rate_b ? 4 : 0) + bw_comp;
+ (is_rate_b ? 4 : 0) + delta;
reg_limit = (eirp_txpower > power_level) ?
(eirp_txpower - power_level) : 0;
} else
reg_limit = 0;
- return txpower + bw_comp - reg_limit;
+ return txpower + delta - reg_limit;
}
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf)
+ enum ieee80211_band band,
+ int power_level)
{
u8 txpower;
u16 eeprom;
@@ -1914,8 +2054,17 @@
u32 reg;
u8 r1;
u32 offset;
- enum ieee80211_band band = conf->channel->band;
- int power_level = conf->power_level;
+ int delta;
+
+ /*
+ * Calculate HT40 compensation delta
+ */
+ delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
+
+ /*
+ * calculate temperature compensation delta
+ */
+ delta += rt2800_get_gain_calibration_delta(rt2x00dev);
/*
* set to normal bbp tx power control mode: +/- 0dBm
@@ -1944,8 +2093,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE0);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE0, txpower);
/*
@@ -1955,8 +2104,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE1);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE1, txpower);
/*
@@ -1966,8 +2115,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE2);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE2, txpower);
/*
@@ -1977,8 +2126,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE3);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE3, txpower);
/* read the next four txpower values */
@@ -1993,8 +2142,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE0);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE4, txpower);
/*
@@ -2004,8 +2153,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE1);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE5, txpower);
/*
@@ -2015,8 +2164,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE2);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE6, txpower);
/*
@@ -2026,8 +2175,8 @@
*/
txpower = rt2x00_get_field16(eeprom,
EEPROM_TXPOWER_BYRATE_RATE3);
- txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
- power_level, txpower);
+ txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
+ power_level, txpower, delta);
rt2x00_set_field32(®, TX_PWR_CFG_RATE7, txpower);
rt2800_register_write(rt2x00dev, offset, reg);
@@ -2037,6 +2186,13 @@
}
}
+void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_config_txpower(rt2x00dev, rt2x00dev->curr_band,
+ rt2x00dev->tx_power);
+}
+EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
+
static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
@@ -2090,10 +2246,12 @@
if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
rt2800_config_channel(rt2x00dev, libconf->conf,
&libconf->rf, &libconf->channel);
- rt2800_config_txpower(rt2x00dev, libconf->conf);
+ rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
+ libconf->conf->power_level);
}
if (flags & IEEE80211_CONF_CHANGE_POWER)
- rt2800_config_txpower(rt2x00dev, libconf->conf);
+ rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
+ libconf->conf->power_level);
if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
rt2800_config_retry_limit(rt2x00dev, libconf);
if (flags & IEEE80211_CONF_CHANGE_PS)
@@ -2254,7 +2412,7 @@
} else if (rt2800_is_305x_soc(rt2x00dev)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000001f);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
} else if (rt2x00_rt(rt2x00dev, RT5390)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
@@ -2758,8 +2916,7 @@
ant = (div_mode == 3) ? 1 : 0;
/* check if this is a Bluetooth combo card */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
- if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) {
+ if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
u32 reg;
rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
@@ -3155,8 +3312,8 @@
rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
- if (!test_bit(CONFIG_EXTERNAL_LNA_BG,
- &rt2x00dev->flags))
+ if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG,
+ &rt2x00dev->cap_flags))
rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
@@ -3530,6 +3687,7 @@
!rt2x00_rf(rt2x00dev, RF3022) &&
!rt2x00_rf(rt2x00dev, RF3052) &&
!rt2x00_rf(rt2x00dev, RF3320) &&
+ !rt2x00_rf(rt2x00dev, RF5370) &&
!rt2x00_rf(rt2x00dev, RF5390)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
@@ -3568,26 +3726,30 @@
}
/*
- * Read frequency offset and RF programming sequence.
+ * Determine external LNA informations.
*/
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
- rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-
- /*
- * Read external LNA informations.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
- __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
- __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
/*
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
+
+ /*
+ * Detect if this device has Bluetooth co-existence.
+ */
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
+ __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
+
+ /*
+ * Read frequency offset and RF programming sequence.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
/*
* Store led settings, for correct led behaviour.
@@ -3597,7 +3759,7 @@
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
+ rt2x00dev->led_mcu_reg = eeprom;
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
@@ -3607,7 +3769,7 @@
if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
EIRP_MAX_TX_POWER_LIMIT)
- __set_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
return 0;
}
@@ -3828,6 +3990,7 @@
rt2x00_rf(rt2x00dev, RF3021) ||
rt2x00_rf(rt2x00dev, RF3022) ||
rt2x00_rf(rt2x00dev, RF3320) ||
+ rt2x00_rf(rt2x00dev, RF5370) ||
rt2x00_rf(rt2x00dev, RF5390)) {
spec->num_channels = 14;
spec->channels = rf_vals_3x;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 0c92d86..f2d1594 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -181,6 +181,7 @@
void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
const u32 count);
+void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev);
int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 808073a..cc4a54f 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -66,7 +66,7 @@
return;
for (i = 0; i < 200; i++) {
- rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, ®);
+ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®);
if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
(rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
@@ -80,8 +80,8 @@
if (i == 200)
ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
}
#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
@@ -105,7 +105,7 @@
struct rt2x00_dev *rt2x00dev = eeprom->data;
u32 reg;
- rt2800_register_read(rt2x00dev, E2PROM_CSR, ®);
+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
@@ -127,7 +127,7 @@
rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT,
!!eeprom->reg_chip_select);
- rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
+ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
}
static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
@@ -135,7 +135,7 @@
struct eeprom_93cx6 eeprom;
u32 reg;
- rt2800_register_read(rt2x00dev, E2PROM_CSR, ®);
+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
eeprom.data = rt2x00dev;
eeprom.register_read = rt2800pci_eepromregister_read;
@@ -195,9 +195,9 @@
switch (queue->qid) {
case QID_RX:
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
/*
@@ -207,15 +207,15 @@
tasklet_enable(&rt2x00dev->tbtt_tasklet);
tasklet_enable(&rt2x00dev->pretbtt_tasklet);
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®);
+ rt2x00pci_register_read(rt2x00dev, INT_TIMER_EN, ®);
rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 1);
- rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
+ rt2x00pci_register_write(rt2x00dev, INT_TIMER_EN, reg);
break;
default:
break;
@@ -233,11 +233,13 @@
case QID_AC_BE:
case QID_AC_BK:
entry = rt2x00queue_get_entry(queue, Q_INDEX);
- rt2800_register_write(rt2x00dev, TX_CTX_IDX(queue->qid), entry->entry_idx);
+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(queue->qid),
+ entry->entry_idx);
break;
case QID_MGMT:
entry = rt2x00queue_get_entry(queue, Q_INDEX);
- rt2800_register_write(rt2x00dev, TX_CTX_IDX(5), entry->entry_idx);
+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(5),
+ entry->entry_idx);
break;
default:
break;
@@ -251,20 +253,20 @@
switch (queue->qid) {
case QID_RX:
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®);
+ rt2x00pci_register_read(rt2x00dev, INT_TIMER_EN, ®);
rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 0);
- rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
+ rt2x00pci_register_write(rt2x00dev, INT_TIMER_EN, reg);
/*
* Wait for tbtt tasklets to finish.
@@ -295,19 +297,19 @@
*/
reg = 0;
rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
/*
* Write firmware to device.
*/
- rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
- data, len);
+ rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+ data, len);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
- rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
return 0;
}
@@ -351,7 +353,7 @@
* Set RX IDX in register to inform hardware that we have
* handled this entry and it is available for reuse again.
*/
- rt2800_register_write(rt2x00dev, RX_CRX_IDX,
+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX,
entry->entry_idx);
} else {
rt2x00_desc_read(entry_priv->desc, 1, &word);
@@ -369,45 +371,51 @@
* Initialize registers.
*/
entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
- rt2800_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
- rt2800_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
- rt2800_register_write(rt2x00dev, TX_CTX_IDX0, 0);
- rt2800_register_write(rt2x00dev, TX_DTX_IDX0, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0,
+ rt2x00dev->tx[0].limit);
+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
- rt2800_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
- rt2800_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
- rt2800_register_write(rt2x00dev, TX_CTX_IDX1, 0);
- rt2800_register_write(rt2x00dev, TX_DTX_IDX1, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1,
+ rt2x00dev->tx[1].limit);
+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
- rt2800_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
- rt2800_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
- rt2800_register_write(rt2x00dev, TX_CTX_IDX2, 0);
- rt2800_register_write(rt2x00dev, TX_DTX_IDX2, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2,
+ rt2x00dev->tx[2].limit);
+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
- rt2800_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
- rt2800_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
- rt2800_register_write(rt2x00dev, TX_CTX_IDX3, 0);
- rt2800_register_write(rt2x00dev, TX_DTX_IDX3, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3,
+ rt2x00dev->tx[3].limit);
+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
entry_priv = rt2x00dev->rx->entries[0].priv_data;
- rt2800_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
- rt2800_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
- rt2800_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
- rt2800_register_write(rt2x00dev, RX_DRX_IDX, 0);
+ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT,
+ rt2x00dev->rx[0].limit);
+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX,
+ rt2x00dev->rx[0].limit - 1);
+ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
/*
* Enable global DMA configuration
*/
- rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
- rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
- rt2800_register_write(rt2x00dev, DELAY_INT_CFG, 0);
+ rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
return 0;
}
@@ -427,8 +435,8 @@
* should clear the register to assure a clean state.
*/
if (state == STATE_RADIO_IRQ_ON) {
- rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
- rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
/*
* Enable tasklets. The beacon related tasklets are
@@ -440,7 +448,7 @@
}
spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
- rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, 0);
rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, 0);
rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask);
@@ -459,7 +467,7 @@
rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, 0);
rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, 0);
rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, 0);
- rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
if (state == STATE_RADIO_IRQ_OFF) {
@@ -480,7 +488,7 @@
/*
* Reset DMA indexes
*/
- rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1);
@@ -488,26 +496,26 @@
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1);
rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1);
rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
- rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
if (rt2x00_rt(rt2x00dev, RT5390)) {
- rt2800_register_read(rt2x00dev, AUX_CTRL, ®);
+ rt2x00pci_register_read(rt2x00dev, AUX_CTRL, ®);
rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1);
rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1);
- rt2800_register_write(rt2x00dev, AUX_CTRL, reg);
+ rt2x00pci_register_write(rt2x00dev, AUX_CTRL, reg);
}
- rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
return 0;
}
@@ -525,8 +533,8 @@
{
if (rt2x00_is_soc(rt2x00dev)) {
rt2800_disable_radio(rt2x00dev);
- rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
}
}
@@ -537,8 +545,10 @@
rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02);
rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
} else if (state == STATE_SLEEP) {
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, 0xffffffff);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, 0xffffffff);
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
+ 0xffffffff);
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID,
+ 0xffffffff);
rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01);
}
@@ -717,12 +727,13 @@
rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
+static bool rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
struct queue_entry *entry;
u32 status;
u8 qid;
+ int max_tx_done = 16;
while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
@@ -759,11 +770,16 @@
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
rt2800_txdone_entry(entry, status);
+
+ if (--max_tx_done == 0)
+ break;
}
+
+ return !max_tx_done;
}
-static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_field32 irq_field)
+static inline void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
{
u32 reg;
@@ -772,15 +788,17 @@
* access needs locking.
*/
spin_lock_irq(&rt2x00dev->irqmask_lock);
- rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
rt2x00_set_field32(®, irq_field, 1);
- rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
spin_unlock_irq(&rt2x00dev->irqmask_lock);
}
static void rt2800pci_txstatus_tasklet(unsigned long data)
{
- rt2800pci_txdone((struct rt2x00_dev *)data);
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ if (rt2800pci_txdone(rt2x00dev))
+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
/*
* No need to enable the tx status interrupt here as we always
@@ -806,8 +824,10 @@
static void rt2800pci_rxdone_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- rt2x00pci_rxdone(rt2x00dev);
- rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
+ if (rt2x00pci_rxdone(rt2x00dev))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+ else
+ rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
}
static void rt2800pci_autowake_tasklet(unsigned long data)
@@ -841,7 +861,7 @@
* need to lock the kfifo.
*/
for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
- rt2800_register_read(rt2x00dev, TX_STA_FIFO, &status);
+ rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, &status);
if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
break;
@@ -863,8 +883,8 @@
u32 reg, mask;
/* Read status and ACK all interrupts */
- rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
- rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
if (!reg)
return IRQ_NONE;
@@ -904,9 +924,9 @@
* the tasklet will reenable the appropriate interrupts.
*/
spin_lock(&rt2x00dev->irqmask_lock);
- rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
reg &= mask;
- rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
spin_unlock(&rt2x00dev->irqmask_lock);
return IRQ_HANDLED;
@@ -956,28 +976,28 @@
* This device has multiple filters for control frames
* and has a separate filter for PS Poll frames.
*/
- __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
/*
* This device has a pre tbtt interrupt and thus fetches
* a new beacon directly prior to transmission.
*/
- __set_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
/*
* This device requires firmware.
*/
if (!rt2x00_is_soc(rt2x00dev))
- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags);
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
if (!modparam_nohwcrypt)
- __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_HT_TX_DESC, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
@@ -1008,6 +1028,7 @@
.ampdu_action = rt2800_ampdu_action,
.flush = rt2x00mac_flush,
.get_survey = rt2800_get_survey,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2800_ops rt2800pci_rt2800_ops = {
@@ -1043,9 +1064,11 @@
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
+ .gain_calibration = rt2800_gain_calibration,
.start_queue = rt2800pci_start_queue,
.kick_queue = rt2800pci_kick_queue,
.stop_queue = rt2800pci_stop_queue,
+ .flush_queue = rt2x00pci_flush_queue,
.write_tx_desc = rt2800pci_write_tx_desc,
.write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
@@ -1105,36 +1128,36 @@
*/
#ifdef CONFIG_PCI
static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
- { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0601) },
+ { PCI_DEVICE(0x1814, 0x0681) },
+ { PCI_DEVICE(0x1814, 0x0701) },
+ { PCI_DEVICE(0x1814, 0x0781) },
+ { PCI_DEVICE(0x1814, 0x3090) },
+ { PCI_DEVICE(0x1814, 0x3091) },
+ { PCI_DEVICE(0x1814, 0x3092) },
+ { PCI_DEVICE(0x1432, 0x7708) },
+ { PCI_DEVICE(0x1432, 0x7727) },
+ { PCI_DEVICE(0x1432, 0x7728) },
+ { PCI_DEVICE(0x1432, 0x7738) },
+ { PCI_DEVICE(0x1432, 0x7748) },
+ { PCI_DEVICE(0x1432, 0x7758) },
+ { PCI_DEVICE(0x1432, 0x7768) },
+ { PCI_DEVICE(0x1462, 0x891a) },
+ { PCI_DEVICE(0x1a3b, 0x1059) },
#ifdef CONFIG_RT2800PCI_RT33XX
- { PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1814, 0x3390) },
#endif
#ifdef CONFIG_RT2800PCI_RT35XX
- { PCI_DEVICE(0x1432, 0x7711), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1432, 0x7722), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) },
- { PCI_DEVICE(0x1814, 0x3593), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1432, 0x7711) },
+ { PCI_DEVICE(0x1432, 0x7722) },
+ { PCI_DEVICE(0x1814, 0x3060) },
+ { PCI_DEVICE(0x1814, 0x3062) },
+ { PCI_DEVICE(0x1814, 0x3562) },
+ { PCI_DEVICE(0x1814, 0x3592) },
+ { PCI_DEVICE(0x1814, 0x3593) },
#endif
#ifdef CONFIG_RT2800PCI_RT53XX
- { PCI_DEVICE(0x1814, 0x5390), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1814, 0x5390) },
#endif
{ 0, }
};
@@ -1170,10 +1193,16 @@
#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
#ifdef CONFIG_PCI
+static int rt2800pci_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ return rt2x00pci_probe(pci_dev, &rt2800pci_ops);
+}
+
static struct pci_driver rt2800pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2800pci_device_table,
- .probe = rt2x00pci_probe,
+ .probe = rt2800pci_probe,
.remove = __devexit_p(rt2x00pci_remove),
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 37509d0..ba82c97 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -59,16 +59,16 @@
switch (queue->qid) {
case QID_RX:
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
break;
default:
break;
@@ -82,16 +82,16 @@
switch (queue->qid) {
case QID_RX:
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
break;
default:
break;
@@ -99,6 +99,63 @@
}
/*
+ * test if there is an entry in any TX queue for which DMA is done
+ * but the TX status has not been returned yet
+ */
+static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+
+ tx_queue_for_each(rt2x00dev, queue) {
+ if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
+ rt2x00queue_get_entry(queue, Q_INDEX_DONE))
+ return true;
+ }
+ return false;
+}
+
+static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
+ int urb_status, u32 tx_status)
+{
+ if (urb_status) {
+ WARNING(rt2x00dev, "rt2x00usb_register_read_async failed: %d\n", urb_status);
+ return false;
+ }
+
+ /* try to read all TX_STA_FIFO entries before scheduling txdone_work */
+ if (rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID)) {
+ if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status)) {
+ WARNING(rt2x00dev, "TX status FIFO overrun, "
+ "drop tx status report.\n");
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
+ } else
+ return true;
+ } else if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) {
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
+ } else if (rt2800usb_txstatus_pending(rt2x00dev)) {
+ mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
+ }
+
+ return false;
+}
+
+static void rt2800usb_tx_dma_done(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+
+ rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
+ rt2800usb_tx_sta_fifo_read_completed);
+}
+
+static void rt2800usb_tx_sta_fifo_timeout(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+
+ rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
+ rt2800usb_tx_sta_fifo_read_completed);
+}
+
+/*
* Firmware functions
*/
static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
@@ -129,11 +186,11 @@
/*
* Write firmware to device.
*/
- rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
- data + offset, length);
+ rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+ data + offset, length);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
/*
* Send firmware request to device to load firmware,
@@ -148,7 +205,7 @@
}
msleep(10);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
return 0;
}
@@ -166,22 +223,22 @@
if (rt2800_wait_csr_ready(rt2x00dev))
return -EBUSY;
- rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
+ rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
- rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
- rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
- rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
USB_MODE_RESET, REGISTER_TIMEOUT);
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
return 0;
}
@@ -193,7 +250,7 @@
if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
return -EIO;
- rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®);
+ rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®);
rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0);
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
@@ -206,7 +263,7 @@
/ 1024) - 3);
rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1);
rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1);
- rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
+ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
return rt2800_enable_radio(rt2x00dev);
}
@@ -282,12 +339,12 @@
unsigned int i;
u32 reg;
- rt2800_register_read(rt2x00dev, TXRXQ_PCNT, ®);
+ rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, ®);
if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
WARNING(rt2x00dev, "TX HW queue 0 timed out,"
" invoke forced kick\n");
- rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40012);
+ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40012);
for (i = 0; i < 10; i++) {
udelay(10);
@@ -295,15 +352,15 @@
break;
}
- rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
}
- rt2800_register_read(rt2x00dev, TXRXQ_PCNT, ®);
+ rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, ®);
if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
WARNING(rt2x00dev, "TX HW queue 1 timed out,"
" invoke forced kick\n");
- rt2800_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
+ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
for (i = 0; i < 10; i++) {
udelay(10);
@@ -311,7 +368,7 @@
break;
}
- rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
}
rt2x00usb_watchdog(rt2x00dev);
@@ -420,13 +477,24 @@
while (!rt2x00queue_empty(queue)) {
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
- !test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
break;
-
- rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ else if (rt2x00queue_status_timeout(entry))
+ rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
+ else
+ break;
}
}
+
+ /*
+ * The hw may delay sending the packet after DMA complete
+ * if the medium is busy, thus the TX_STA_FIFO entry is
+ * also delayed -> use a timer to retrieve it.
+ */
+ if (rt2800usb_txstatus_pending(rt2x00dev))
+ mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
}
/*
@@ -553,19 +621,24 @@
* This device has multiple filters for control frames
* and has a separate filter for PS Poll frames.
*/
- __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
/*
* This device requires firmware.
*/
- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
if (!modparam_nohwcrypt)
- __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_HT_TX_DESC, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
+
+ setup_timer(&rt2x00dev->txstatus_timer,
+ rt2800usb_tx_sta_fifo_timeout,
+ (unsigned long) rt2x00dev);
/*
* Set the rssi offset.
@@ -602,6 +675,7 @@
.ampdu_action = rt2800_ampdu_action,
.flush = rt2x00mac_flush,
.get_survey = rt2800_get_survey,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2800_ops rt2800usb_rt2800_ops = {
@@ -630,11 +704,13 @@
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
+ .gain_calibration = rt2800_gain_calibration,
.watchdog = rt2800usb_watchdog,
.start_queue = rt2800usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt2800usb_stop_queue,
.flush_queue = rt2x00usb_flush_queue,
+ .tx_dma_done = rt2800usb_tx_dma_done,
.write_tx_desc = rt2800usb_write_tx_desc,
.write_tx_data = rt2800usb_write_tx_data,
.write_beacon = rt2800_write_beacon,
@@ -695,294 +771,340 @@
*/
static struct usb_device_id rt2800usb_device_table[] = {
/* Abocom */
- { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07b8, 0x2870) },
+ { USB_DEVICE(0x07b8, 0x2770) },
+ { USB_DEVICE(0x07b8, 0x3070) },
+ { USB_DEVICE(0x07b8, 0x3071) },
+ { USB_DEVICE(0x07b8, 0x3072) },
+ { USB_DEVICE(0x1482, 0x3c09) },
/* AirTies */
- { USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1eda, 0x2012) },
+ { USB_DEVICE(0x1eda, 0x2310) },
/* Allwin */
- { USB_DEVICE(0x8516, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x8516, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x8516, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x8516, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x8516, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x8516, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x8516, 0x2070) },
+ { USB_DEVICE(0x8516, 0x2770) },
+ { USB_DEVICE(0x8516, 0x2870) },
+ { USB_DEVICE(0x8516, 0x3070) },
+ { USB_DEVICE(0x8516, 0x3071) },
+ { USB_DEVICE(0x8516, 0x3072) },
+ /* Alpha Networks */
+ { USB_DEVICE(0x14b2, 0x3c06) },
+ { USB_DEVICE(0x14b2, 0x3c07) },
+ { USB_DEVICE(0x14b2, 0x3c09) },
+ { USB_DEVICE(0x14b2, 0x3c12) },
+ { USB_DEVICE(0x14b2, 0x3c23) },
+ { USB_DEVICE(0x14b2, 0x3c25) },
+ { USB_DEVICE(0x14b2, 0x3c27) },
+ { USB_DEVICE(0x14b2, 0x3c28) },
+ { USB_DEVICE(0x14b2, 0x3c2c) },
/* Amit */
- { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x15c5, 0x0008) },
/* Askey */
- { USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1690, 0x0740) },
/* ASUS */
- { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1761, 0x0b05), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1731) },
+ { USB_DEVICE(0x0b05, 0x1732) },
+ { USB_DEVICE(0x0b05, 0x1742) },
+ { USB_DEVICE(0x0b05, 0x1784) },
+ { USB_DEVICE(0x1761, 0x0b05) },
/* AzureWave */
- { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x13d3, 0x3307), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x13d3, 0x3321), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13d3, 0x3247) },
+ { USB_DEVICE(0x13d3, 0x3273) },
+ { USB_DEVICE(0x13d3, 0x3305) },
+ { USB_DEVICE(0x13d3, 0x3307) },
+ { USB_DEVICE(0x13d3, 0x3321) },
/* Belkin */
- { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x050d, 0x825b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x050d, 0x935a), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x050d, 0x935b), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x050d, 0x8053) },
+ { USB_DEVICE(0x050d, 0x805c) },
+ { USB_DEVICE(0x050d, 0x815c) },
+ { USB_DEVICE(0x050d, 0x825b) },
+ { USB_DEVICE(0x050d, 0x935a) },
+ { USB_DEVICE(0x050d, 0x935b) },
/* Buffalo */
- { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0411, 0x016f), USB_DEVICE_DATA(&rt2800usb_ops) },
- /* Conceptronic */
- { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0411, 0x00e8) },
+ { USB_DEVICE(0x0411, 0x016f) },
+ { USB_DEVICE(0x0411, 0x01a2) },
/* Corega */
- { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x002f) },
+ { USB_DEVICE(0x07aa, 0x003c) },
+ { USB_DEVICE(0x07aa, 0x003f) },
+ { USB_DEVICE(0x18c5, 0x0012) },
/* D-Link */
- { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c16), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c09) },
+ { USB_DEVICE(0x07d1, 0x3c0a) },
+ { USB_DEVICE(0x07d1, 0x3c0d) },
+ { USB_DEVICE(0x07d1, 0x3c0e) },
+ { USB_DEVICE(0x07d1, 0x3c0f) },
+ { USB_DEVICE(0x07d1, 0x3c11) },
+ { USB_DEVICE(0x07d1, 0x3c16) },
/* Draytek */
- { USB_DEVICE(0x07fa, 0x7712), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07fa, 0x7712) },
/* Edimax */
- { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x7392, 0x7711) },
+ { USB_DEVICE(0x7392, 0x7717) },
+ { USB_DEVICE(0x7392, 0x7718) },
/* Encore */
- { USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x203d, 0x1480) },
+ { USB_DEVICE(0x203d, 0x14a9) },
/* EnGenius */
- { USB_DEVICE(0x1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9701) },
+ { USB_DEVICE(0x1740, 0x9702) },
+ { USB_DEVICE(0x1740, 0x9703) },
+ { USB_DEVICE(0x1740, 0x9705) },
+ { USB_DEVICE(0x1740, 0x9706) },
+ { USB_DEVICE(0x1740, 0x9707) },
+ { USB_DEVICE(0x1740, 0x9708) },
+ { USB_DEVICE(0x1740, 0x9709) },
+ /* Gemtek */
+ { USB_DEVICE(0x15a9, 0x0012) },
/* Gigabyte */
- { USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1044, 0x800b) },
+ { USB_DEVICE(0x1044, 0x800d) },
/* Hawking */
- { USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e66, 0x0013), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e66, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e66, 0x0018), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e66, 0x0001) },
+ { USB_DEVICE(0x0e66, 0x0003) },
+ { USB_DEVICE(0x0e66, 0x0009) },
+ { USB_DEVICE(0x0e66, 0x000b) },
+ { USB_DEVICE(0x0e66, 0x0013) },
+ { USB_DEVICE(0x0e66, 0x0017) },
+ { USB_DEVICE(0x0e66, 0x0018) },
/* I-O DATA */
- { USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x04bb, 0x0945) },
+ { USB_DEVICE(0x04bb, 0x0947) },
+ { USB_DEVICE(0x04bb, 0x0948) },
/* Linksys */
- { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13b1, 0x0031) },
+ { USB_DEVICE(0x1737, 0x0070) },
+ { USB_DEVICE(0x1737, 0x0071) },
/* Logitec */
- { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0789, 0x0166), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0789, 0x0162) },
+ { USB_DEVICE(0x0789, 0x0163) },
+ { USB_DEVICE(0x0789, 0x0164) },
+ { USB_DEVICE(0x0789, 0x0166) },
/* Motorola */
- { USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x100d, 0x9031) },
/* MSI */
- { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x3822), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x3871), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x822a), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x822b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x822c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x871a), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x871b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x871c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0db0, 0x3820) },
+ { USB_DEVICE(0x0db0, 0x3821) },
+ { USB_DEVICE(0x0db0, 0x3822) },
+ { USB_DEVICE(0x0db0, 0x3870) },
+ { USB_DEVICE(0x0db0, 0x3871) },
+ { USB_DEVICE(0x0db0, 0x6899) },
+ { USB_DEVICE(0x0db0, 0x821a) },
+ { USB_DEVICE(0x0db0, 0x822a) },
+ { USB_DEVICE(0x0db0, 0x822b) },
+ { USB_DEVICE(0x0db0, 0x822c) },
+ { USB_DEVICE(0x0db0, 0x870a) },
+ { USB_DEVICE(0x0db0, 0x871a) },
+ { USB_DEVICE(0x0db0, 0x871b) },
+ { USB_DEVICE(0x0db0, 0x871c) },
+ { USB_DEVICE(0x0db0, 0x899a) },
/* Para */
- { USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x20b8, 0x8888) },
/* Pegatron */
- { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1d4d, 0x000c) },
+ { USB_DEVICE(0x1d4d, 0x000e) },
+ { USB_DEVICE(0x1d4d, 0x0011) },
/* Philips */
- { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0471, 0x200f) },
/* Planex */
- { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x2019, 0xab25) },
+ { USB_DEVICE(0x2019, 0xed06) },
/* Quanta */
- { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1a32, 0x0304) },
/* Ralink */
- { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x2070) },
+ { USB_DEVICE(0x148f, 0x2770) },
+ { USB_DEVICE(0x148f, 0x2870) },
+ { USB_DEVICE(0x148f, 0x3070) },
+ { USB_DEVICE(0x148f, 0x3071) },
+ { USB_DEVICE(0x148f, 0x3072) },
/* Samsung */
- { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x04e8, 0x2018) },
/* Siemens */
- { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x129b, 0x1828) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0017) },
+ { USB_DEVICE(0x0df6, 0x002b) },
+ { USB_DEVICE(0x0df6, 0x002c) },
+ { USB_DEVICE(0x0df6, 0x002d) },
+ { USB_DEVICE(0x0df6, 0x0039) },
+ { USB_DEVICE(0x0df6, 0x003b) },
+ { USB_DEVICE(0x0df6, 0x003d) },
+ { USB_DEVICE(0x0df6, 0x003e) },
+ { USB_DEVICE(0x0df6, 0x003f) },
+ { USB_DEVICE(0x0df6, 0x0040) },
+ { USB_DEVICE(0x0df6, 0x0042) },
+ { USB_DEVICE(0x0df6, 0x0047) },
+ { USB_DEVICE(0x0df6, 0x0048) },
+ { USB_DEVICE(0x0df6, 0x0051) },
+ { USB_DEVICE(0x0df6, 0x005f) },
/* SMC */
- { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xa703), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0x6618) },
+ { USB_DEVICE(0x083a, 0x7511) },
+ { USB_DEVICE(0x083a, 0x7512) },
+ { USB_DEVICE(0x083a, 0x7522) },
+ { USB_DEVICE(0x083a, 0x8522) },
+ { USB_DEVICE(0x083a, 0xa618) },
+ { USB_DEVICE(0x083a, 0xa701) },
+ { USB_DEVICE(0x083a, 0xa702) },
+ { USB_DEVICE(0x083a, 0xa703) },
+ { USB_DEVICE(0x083a, 0xb522) },
/* Sparklan */
- { USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x15a9, 0x0006) },
/* Sweex */
- { USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
- /* U-Media*/
- { USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x177f, 0x0302) },
+ /* U-Media */
+ { USB_DEVICE(0x157e, 0x300e) },
+ { USB_DEVICE(0x157e, 0x3013) },
/* ZCOM */
- { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0cde, 0x0022) },
+ { USB_DEVICE(0x0cde, 0x0025) },
/* Zinwell */
- { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x5a57, 0x0280) },
+ { USB_DEVICE(0x5a57, 0x0282) },
+ { USB_DEVICE(0x5a57, 0x0283) },
+ { USB_DEVICE(0x5a57, 0x5257) },
/* Zyxel */
- { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0586, 0x3416) },
+ { USB_DEVICE(0x0586, 0x3418) },
+ { USB_DEVICE(0x0586, 0x341e) },
+ { USB_DEVICE(0x0586, 0x343e) },
#ifdef CONFIG_RT2800USB_RT33XX
/* Ralink */
- { USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x148f, 0x8070), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x3370) },
+ { USB_DEVICE(0x148f, 0x8070) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x0050), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0050) },
#endif
#ifdef CONFIG_RT2800USB_RT35XX
/* Allwin */
- { USB_DEVICE(0x8516, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x8516, 0x3572) },
/* Askey */
- { USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1690, 0x0744) },
/* Cisco */
- { USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x167b, 0x4001) },
/* EnGenius */
- { USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9801) },
/* I-O DATA */
- { USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x04bb, 0x0944) },
+ /* Linksys */
+ { USB_DEVICE(0x13b1, 0x002f) },
+ { USB_DEVICE(0x1737, 0x0079) },
/* Ralink */
- { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x3572) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0041) },
/* Toshiba */
- { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0930, 0x0a07) },
/* Zinwell */
- { USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x5a57, 0x0284) },
+#endif
+#ifdef CONFIG_RT2800USB_RT53XX
+ /* Azurewave */
+ { USB_DEVICE(0x13d3, 0x3329) },
+ { USB_DEVICE(0x13d3, 0x3365) },
+ /* Ralink */
+ { USB_DEVICE(0x148f, 0x5370) },
+ { USB_DEVICE(0x148f, 0x5372) },
#endif
#ifdef CONFIG_RT2800USB_UNKNOWN
/*
* Unclear what kind of devices these are (they aren't supported by the
* vendor linux driver).
*/
+ /* Abocom */
+ { USB_DEVICE(0x07b8, 0x3073) },
+ { USB_DEVICE(0x07b8, 0x3074) },
+ /* Alpha Networks */
+ { USB_DEVICE(0x14b2, 0x3c08) },
+ { USB_DEVICE(0x14b2, 0x3c11) },
/* Amigo */
- { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e0b, 0x9031) },
+ { USB_DEVICE(0x0e0b, 0x9041) },
/* ASUS */
- { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0b05, 0x1790), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x166a) },
+ { USB_DEVICE(0x0b05, 0x1760) },
+ { USB_DEVICE(0x0b05, 0x1761) },
+ { USB_DEVICE(0x0b05, 0x1790) },
+ { USB_DEVICE(0x0b05, 0x179d) },
/* AzureWave */
- { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x13d3, 0x3322), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13d3, 0x3262) },
+ { USB_DEVICE(0x13d3, 0x3284) },
+ { USB_DEVICE(0x13d3, 0x3322) },
/* Belkin */
- { USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x050d, 0x1003) },
+ { USB_DEVICE(0x050d, 0x825a) },
/* Buffalo */
- { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0411, 0x0148), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0411, 0x0150), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x0411, 0x015d), USB_DEVICE_DATA(&rt2800usb_ops) },
- /* Conceptronic */
- { USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0411, 0x012e) },
+ { USB_DEVICE(0x0411, 0x0148) },
+ { USB_DEVICE(0x0411, 0x0150) },
+ { USB_DEVICE(0x0411, 0x015d) },
/* Corega */
- { USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x0041) },
+ { USB_DEVICE(0x07aa, 0x0042) },
+ { USB_DEVICE(0x18c5, 0x0008) },
/* D-Link */
- { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c17), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c0b) },
+ { USB_DEVICE(0x07d1, 0x3c13) },
+ { USB_DEVICE(0x07d1, 0x3c15) },
+ { USB_DEVICE(0x07d1, 0x3c17) },
+ { USB_DEVICE(0x2001, 0x3c17) },
/* Edimax */
- { USB_DEVICE(0x7392, 0x4085), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x7392, 0x4085) },
+ { USB_DEVICE(0x7392, 0x7722) },
/* Encore */
- { USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x203d, 0x14a1) },
/* Gemtek */
- { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x15a9, 0x0010) },
/* Gigabyte */
- { USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1044, 0x800c) },
+ /* Huawei */
+ { USB_DEVICE(0x148f, 0xf101) },
+ /* I-O DATA */
+ { USB_DEVICE(0x04bb, 0x094b) },
/* LevelOne */
- { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x0605) },
+ { USB_DEVICE(0x1740, 0x0615) },
/* Linksys */
- { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1737, 0x0078), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0077) },
+ { USB_DEVICE(0x1737, 0x0078) },
+ /* Logitec */
+ { USB_DEVICE(0x0789, 0x0168) },
+ { USB_DEVICE(0x0789, 0x0169) },
/* Motorola */
- { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x100d, 0x9032) },
/* Ovislink */
- { USB_DEVICE(0x1b75, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1b75, 0x3071) },
+ { USB_DEVICE(0x1b75, 0x3072) },
/* Pegatron */
- { USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x05a6, 0x0101) },
+ { USB_DEVICE(0x1d4d, 0x0002) },
+ { USB_DEVICE(0x1d4d, 0x0010) },
/* Planex */
- { USB_DEVICE(0x2019, 0x5201), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x2019, 0x5201) },
+ { USB_DEVICE(0x2019, 0xab24) },
/* Qcom */
- { USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x18e8, 0x6259) },
+ /* RadioShack */
+ { USB_DEVICE(0x08b9, 0x1197) },
+ /* Sitecom */
+ { USB_DEVICE(0x0df6, 0x003c) },
+ { USB_DEVICE(0x0df6, 0x004a) },
+ { USB_DEVICE(0x0df6, 0x004d) },
+ { USB_DEVICE(0x0df6, 0x0053) },
+ { USB_DEVICE(0x0df6, 0x0060) },
+ { USB_DEVICE(0x0df6, 0x0062) },
/* SMC */
- { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xd522), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x083a, 0xf511), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xa512) },
+ { USB_DEVICE(0x083a, 0xc522) },
+ { USB_DEVICE(0x083a, 0xd522) },
+ { USB_DEVICE(0x083a, 0xf511) },
/* Sweex */
- { USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x177f, 0x0153) },
+ { USB_DEVICE(0x177f, 0x0313) },
/* Zyxel */
- { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0586, 0x341a) },
#endif
{ 0, }
};
@@ -995,10 +1117,16 @@
MODULE_FIRMWARE(FIRMWARE_RT2870);
MODULE_LICENSE("GPL");
+static int rt2800usb_probe(struct usb_interface *usb_intf,
+ const struct usb_device_id *id)
+{
+ return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
+}
+
static struct usb_driver rt2800usb_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2800usb_device_table,
- .probe = rt2x00usb_probe,
+ .probe = rt2800usb_probe,
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 7f10239..c446db6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -37,6 +37,7 @@
#include <linux/etherdevice.h>
#include <linux/input-polldev.h>
#include <linux/kfifo.h>
+#include <linux/timer.h>
#include <net/mac80211.h>
@@ -348,6 +349,11 @@
* to bring the device/driver back into the desired state.
*/
struct delayed_work watchdog_work;
+
+ /*
+ * Work structure for scheduling periodic AGC adjustments.
+ */
+ struct delayed_work agc_work;
};
enum rt2x00_delayed_flags {
@@ -556,6 +562,7 @@
struct link_qual *qual);
void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, const u32 count);
+ void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
/*
* Data queue handlers.
@@ -564,7 +571,8 @@
void (*start_queue) (struct data_queue *queue);
void (*kick_queue) (struct data_queue *queue);
void (*stop_queue) (struct data_queue *queue);
- void (*flush_queue) (struct data_queue *queue);
+ void (*flush_queue) (struct data_queue *queue, bool drop);
+ void (*tx_dma_done) (struct queue_entry *entry);
/*
* TX control handlers
@@ -637,11 +645,11 @@
};
/*
- * rt2x00 device flags
+ * rt2x00 state flags
*/
-enum rt2x00_flags {
+enum rt2x00_state_flags {
/*
- * Device state flags
+ * Device flags
*/
DEVICE_STATE_PRESENT,
DEVICE_STATE_REGISTERED_HW,
@@ -651,40 +659,47 @@
DEVICE_STATE_SCANNING,
/*
- * Driver requirements
- */
- DRIVER_REQUIRE_FIRMWARE,
- DRIVER_REQUIRE_BEACON_GUARD,
- DRIVER_REQUIRE_ATIM_QUEUE,
- DRIVER_REQUIRE_DMA,
- DRIVER_REQUIRE_COPY_IV,
- DRIVER_REQUIRE_L2PAD,
- DRIVER_REQUIRE_TXSTATUS_FIFO,
- DRIVER_REQUIRE_TASKLET_CONTEXT,
- DRIVER_REQUIRE_SW_SEQNO,
- DRIVER_REQUIRE_HT_TX_DESC,
-
- /*
- * Driver features
- */
- CONFIG_SUPPORT_HW_BUTTON,
- CONFIG_SUPPORT_HW_CRYPTO,
- CONFIG_SUPPORT_POWER_LIMIT,
- DRIVER_SUPPORT_CONTROL_FILTERS,
- DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
- DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,
- DRIVER_SUPPORT_LINK_TUNING,
- DRIVER_SUPPORT_WATCHDOG,
-
- /*
* Driver configuration
*/
- CONFIG_FRAME_TYPE,
- CONFIG_RF_SEQUENCE,
- CONFIG_EXTERNAL_LNA_A,
- CONFIG_EXTERNAL_LNA_BG,
- CONFIG_DOUBLE_ANTENNA,
CONFIG_CHANNEL_HT40,
+ CONFIG_POWERSAVING,
+};
+
+/*
+ * rt2x00 capability flags
+ */
+enum rt2x00_capability_flags {
+ /*
+ * Requirements
+ */
+ REQUIRE_FIRMWARE,
+ REQUIRE_BEACON_GUARD,
+ REQUIRE_ATIM_QUEUE,
+ REQUIRE_DMA,
+ REQUIRE_COPY_IV,
+ REQUIRE_L2PAD,
+ REQUIRE_TXSTATUS_FIFO,
+ REQUIRE_TASKLET_CONTEXT,
+ REQUIRE_SW_SEQNO,
+ REQUIRE_HT_TX_DESC,
+ REQUIRE_PS_AUTOWAKE,
+
+ /*
+ * Capabilities
+ */
+ CAPABILITY_HW_BUTTON,
+ CAPABILITY_HW_CRYPTO,
+ CAPABILITY_POWER_LIMIT,
+ CAPABILITY_CONTROL_FILTERS,
+ CAPABILITY_CONTROL_FILTER_PSPOLL,
+ CAPABILITY_PRE_TBTT_INTERRUPT,
+ CAPABILITY_LINK_TUNING,
+ CAPABILITY_FRAME_TYPE,
+ CAPABILITY_RF_SEQUENCE,
+ CAPABILITY_EXTERNAL_LNA_A,
+ CAPABILITY_EXTERNAL_LNA_BG,
+ CAPABILITY_DOUBLE_ANTENNA,
+ CAPABILITY_BT_COEXIST,
};
/*
@@ -733,13 +748,20 @@
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
- * Device flags.
- * In these flags the current status and some
- * of the device capabilities are stored.
+ * Device state flags.
+ * In these flags the current status is stored.
+ * Access to these flags should occur atomically.
*/
unsigned long flags;
/*
+ * Device capabiltiy flags.
+ * In these flags the device/driver capabilities are stored.
+ * Access to these flags should occur non-atomically.
+ */
+ unsigned long cap_flags;
+
+ /*
* Device information, Bus IRQ and name (PCI, SoC)
*/
int irq;
@@ -855,10 +877,20 @@
u8 calibration[2];
/*
+ * Association id.
+ */
+ u16 aid;
+
+ /*
* Beacon interval.
*/
u16 beacon_int;
+ /**
+ * Timestamp of last received beacon
+ */
+ unsigned long last_beacon;
+
/*
* Low level statistics which will have
* to be kept up to date while device is running.
@@ -887,6 +919,11 @@
struct work_struct txdone_work;
/*
+ * Powersaving work
+ */
+ struct delayed_work autowakeup_work;
+
+ /*
* Data queue arrays for RX, TX, Beacon and ATIM.
*/
unsigned int data_queues;
@@ -906,6 +943,11 @@
DECLARE_KFIFO_PTR(txstatus_fifo, u32);
/*
+ * Timer to ensure tx status reports are read (rt2800usb).
+ */
+ struct timer_list txstatus_timer;
+
+ /*
* Tasklet for processing tx status reports (rt2800pci).
*/
struct tasklet_struct txstatus_tasklet;
@@ -1230,6 +1272,10 @@
const struct ieee80211_tx_queue_params *params);
void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
void rt2x00mac_flush(struct ieee80211_hw *hw, bool drop);
+int rt2x00mac_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
+int rt2x00mac_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
+void rt2x00mac_get_ringparam(struct ieee80211_hw *hw,
+ u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
/*
* Driver allocation handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 9416e36..555180d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -100,6 +100,10 @@
erp.basic_rates = bss_conf->basic_rates;
erp.beacon_int = bss_conf->beacon_int;
+ /* Update the AID, this is needed for dynamic PS support */
+ rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0;
+ rt2x00dev->last_beacon = bss_conf->timestamp;
+
/* Update global beacon interval time, this is needed for PS support */
rt2x00dev->beacon_int = bss_conf->beacon_int;
@@ -109,15 +113,6 @@
rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp, changed);
}
-static inline
-enum antenna rt2x00lib_config_antenna_check(enum antenna current_ant,
- enum antenna default_ant)
-{
- if (current_ant != ANTENNA_SW_DIVERSITY)
- return current_ant;
- return (default_ant != ANTENNA_SW_DIVERSITY) ? default_ant : ANTENNA_B;
-}
-
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
struct antenna_setup config)
{
@@ -126,19 +121,35 @@
struct antenna_setup *active = &rt2x00dev->link.ant.active;
/*
- * Failsafe: Make sure we are not sending the
- * ANTENNA_SW_DIVERSITY state to the driver.
- * If that happens, fallback to hardware defaults,
- * or our own default.
+ * When the caller tries to send the SW diversity,
+ * we must update the ANTENNA_RX_DIVERSITY flag to
+ * enable the antenna diversity in the link tuner.
+ *
+ * Secondly, we must guarentee we never send the
+ * software antenna diversity command to the driver.
*/
- if (!(ant->flags & ANTENNA_RX_DIVERSITY))
- config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx);
- else if (config.rx == ANTENNA_SW_DIVERSITY)
+ if (!(ant->flags & ANTENNA_RX_DIVERSITY)) {
+ if (config.rx == ANTENNA_SW_DIVERSITY) {
+ ant->flags |= ANTENNA_RX_DIVERSITY;
+
+ if (def->rx == ANTENNA_SW_DIVERSITY)
+ config.rx = ANTENNA_B;
+ else
+ config.rx = def->rx;
+ }
+ } else if (config.rx == ANTENNA_SW_DIVERSITY)
config.rx = active->rx;
- if (!(ant->flags & ANTENNA_TX_DIVERSITY))
- config.tx = rt2x00lib_config_antenna_check(config.tx, def->tx);
- else if (config.tx == ANTENNA_SW_DIVERSITY)
+ if (!(ant->flags & ANTENNA_TX_DIVERSITY)) {
+ if (config.tx == ANTENNA_SW_DIVERSITY) {
+ ant->flags |= ANTENNA_TX_DIVERSITY;
+
+ if (def->tx == ANTENNA_SW_DIVERSITY)
+ config.tx = ANTENNA_B;
+ else
+ config.tx = def->tx;
+ }
+ } else if (config.tx == ANTENNA_SW_DIVERSITY)
config.tx = active->tx;
/*
@@ -163,12 +174,43 @@
rt2x00queue_start_queue(rt2x00dev->rx);
}
+static u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf)
+{
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+ int center_channel;
+ u16 i;
+
+ /*
+ * Initialize center channel to current channel.
+ */
+ center_channel = spec->channels[conf->channel->hw_value].channel;
+
+ /*
+ * Adjust center channel to HT40+ and HT40- operation.
+ */
+ if (conf_is_ht40_plus(conf))
+ center_channel += 2;
+ else if (conf_is_ht40_minus(conf))
+ center_channel -= (center_channel == 14) ? 1 : 2;
+
+ for (i = 0; i < spec->num_channels; i++)
+ if (spec->channels[i].channel == center_channel)
+ return i;
+
+ WARN_ON(1);
+ return conf->channel->hw_value;
+}
+
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
unsigned int ieee80211_flags)
{
struct rt2x00lib_conf libconf;
u16 hw_value;
+ u16 autowake_timeout;
+ u16 beacon_int;
+ u16 beacon_diff;
memset(&libconf, 0, sizeof(libconf));
@@ -176,10 +218,10 @@
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
if (conf_is_ht40(conf)) {
- __set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+ set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
hw_value = rt2x00ht_center_channel(rt2x00dev, conf);
} else {
- __clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+ clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
hw_value = conf->channel->hw_value;
}
@@ -192,6 +234,10 @@
sizeof(libconf.channel));
}
+ if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+ (ieee80211_flags & IEEE80211_CONF_CHANGE_PS))
+ cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+
/*
* Start configuration.
*/
@@ -204,6 +250,26 @@
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2x00link_reset_tuner(rt2x00dev, false);
+ if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+ (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
+ (conf->flags & IEEE80211_CONF_PS)) {
+ beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
+ beacon_int = msecs_to_jiffies(rt2x00dev->beacon_int);
+
+ if (beacon_diff > beacon_int)
+ beacon_diff = 0;
+
+ autowake_timeout = (conf->max_sleep_period * beacon_int) - beacon_diff;
+ queue_delayed_work(rt2x00dev->workqueue,
+ &rt2x00dev->autowakeup_work,
+ autowake_timeout - 15);
+ }
+
+ if (conf->flags & IEEE80211_CONF_PS)
+ set_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+ else
+ clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+
rt2x00dev->curr_band = conf->channel->band;
rt2x00dev->curr_freq = conf->channel->center_freq;
rt2x00dev->tx_power = conf->power_level;
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 3f5688f..1bb9d46 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -52,7 +52,7 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
- if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || !hw_key)
+ if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags) || !hw_key)
return;
__set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);
@@ -80,7 +80,7 @@
struct ieee80211_key_conf *key = tx_info->control.hw_key;
unsigned int overhead = 0;
- if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || !key)
+ if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags) || !key)
return overhead;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index c92db32..78787fc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -63,7 +63,8 @@
* - driver folder
* - driver file
* - chipset file
- * - device flags file
+ * - device state flags file
+ * - device capability flags file
* - register folder
* - csr offset/value files
* - eeprom offset/value files
@@ -78,6 +79,7 @@
struct dentry *driver_entry;
struct dentry *chipset_entry;
struct dentry *dev_flags;
+ struct dentry *cap_flags;
struct dentry *register_folder;
struct dentry *csr_off_entry;
struct dentry *csr_val_entry;
@@ -553,6 +555,35 @@
.llseek = default_llseek,
};
+static ssize_t rt2x00debug_read_cap_flags(struct file *file,
+ char __user *buf,
+ size_t length,
+ loff_t *offset)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+ char line[16];
+ size_t size;
+
+ if (*offset)
+ return 0;
+
+ size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->cap_flags);
+
+ if (copy_to_user(buf, line, size))
+ return -EFAULT;
+
+ *offset += size;
+ return size;
+}
+
+static const struct file_operations rt2x00debug_fop_cap_flags = {
+ .owner = THIS_MODULE,
+ .read = rt2x00debug_read_cap_flags,
+ .open = rt2x00debug_file_open,
+ .release = rt2x00debug_file_release,
+ .llseek = default_llseek,
+};
+
static struct dentry *rt2x00debug_create_file_driver(const char *name,
struct rt2x00debug_intf
*intf,
@@ -568,7 +599,6 @@
blob->data = data;
data += sprintf(data, "driver:\t%s\n", intf->rt2x00dev->ops->name);
data += sprintf(data, "version:\t%s\n", DRV_VERSION);
- data += sprintf(data, "compiled:\t%s %s\n", __DATE__, __TIME__);
blob->size = strlen(blob->data);
return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
@@ -653,6 +683,12 @@
if (IS_ERR(intf->dev_flags) || !intf->dev_flags)
goto exit;
+ intf->cap_flags = debugfs_create_file("cap_flags", S_IRUSR,
+ intf->driver_folder, intf,
+ &rt2x00debug_fop_cap_flags);
+ if (IS_ERR(intf->cap_flags) || !intf->cap_flags)
+ goto exit;
+
intf->register_folder =
debugfs_create_dir("register", intf->driver_folder);
if (IS_ERR(intf->register_folder) || !intf->register_folder)
@@ -706,7 +742,7 @@
intf, &rt2x00debug_fop_queue_stats);
#ifdef CONFIG_RT2X00_LIB_CRYPTO
- if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags))
intf->crypto_stats_entry =
debugfs_create_file("crypto", S_IRUGO, intf->queue_folder,
intf, &rt2x00debug_fop_crypto_stats);
@@ -744,6 +780,7 @@
debugfs_remove(intf->csr_off_entry);
debugfs_remove(intf->register_folder);
debugfs_remove(intf->dev_flags);
+ debugfs_remove(intf->cap_flags);
debugfs_remove(intf->chipset_entry);
debugfs_remove(intf->driver_entry);
debugfs_remove(intf->driver_folder);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 84eb6ad..c018d67a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/log2.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
@@ -70,6 +71,7 @@
*/
rt2x00queue_start_queues(rt2x00dev);
rt2x00link_start_tuner(rt2x00dev);
+ rt2x00link_start_agc(rt2x00dev);
/*
* Start watchdog monitoring.
@@ -92,6 +94,7 @@
/*
* Stop all queues
*/
+ rt2x00link_stop_agc(rt2x00dev);
rt2x00link_stop_tuner(rt2x00dev);
rt2x00queue_stop_queues(rt2x00dev);
rt2x00queue_flush_queues(rt2x00dev, true);
@@ -138,6 +141,16 @@
rt2x00dev);
}
+static void rt2x00lib_autowakeup(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, autowakeup_work.work);
+
+ if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+ ERROR(rt2x00dev, "Device failed to wakeup.\n");
+ clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+}
+
/*
* Interrupt context handlers.
*/
@@ -197,7 +210,7 @@
* here as they will fetch the next beacon directly prior to
* transmission.
*/
- if (test_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags))
return;
/* fetch next beacon */
@@ -222,7 +235,7 @@
void rt2x00lib_dmastart(struct queue_entry *entry)
{
set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
- rt2x00queue_index_inc(entry->queue, Q_INDEX);
+ rt2x00queue_index_inc(entry, Q_INDEX);
}
EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
@@ -230,7 +243,7 @@
{
set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
- rt2x00queue_index_inc(entry->queue, Q_INDEX_DMA_DONE);
+ rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
}
EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
@@ -268,7 +281,7 @@
/*
* Remove L2 padding which was added during
*/
- if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+ if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
rt2x00queue_remove_l2pad(entry->skb, header_length);
/*
@@ -277,7 +290,7 @@
* mac80211 will expect the same data to be present it the
* frame as it was passed to us.
*/
- if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags))
rt2x00crypto_tx_insert_iv(entry->skb, header_length);
/*
@@ -350,10 +363,14 @@
* which would allow the rc algorithm to better decide on
* which rates are suitable.
*/
- if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
+ tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
tx_info->status.ampdu_len = 1;
tx_info->status.ampdu_ack_len = success ? 1 : 0;
+
+ if (!success)
+ tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
}
if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
@@ -370,7 +387,7 @@
* send the status report back.
*/
if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
- if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags))
+ if (test_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags))
ieee80211_tx_status(rt2x00dev->hw, entry->skb);
else
ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
@@ -385,7 +402,7 @@
rt2x00dev->ops->lib->clear_entry(entry);
- rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
+ rt2x00queue_index_inc(entry, Q_INDEX_DONE);
/*
* If the data queue was below the threshold before the txdone
@@ -409,6 +426,77 @@
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
+static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
+{
+ struct ieee80211_mgmt *mgmt = (void *)data;
+ u8 *pos, *end;
+
+ pos = (u8 *)mgmt->u.beacon.variable;
+ end = data + len;
+ while (pos < end) {
+ if (pos + 2 + pos[1] > end)
+ return NULL;
+
+ if (pos[0] == ie)
+ return pos;
+
+ pos += 2 + pos[1];
+ }
+
+ return NULL;
+}
+
+static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
+ struct sk_buff *skb,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct ieee80211_hdr *hdr = (void *) skb->data;
+ struct ieee80211_tim_ie *tim_ie;
+ u8 *tim;
+ u8 tim_len;
+ bool cam;
+
+ /* If this is not a beacon, or if mac80211 has no powersaving
+ * configured, or if the device is already in powersaving mode
+ * we can exit now. */
+ if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
+ !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
+ return;
+
+ /* min. beacon length + FCS_LEN */
+ if (skb->len <= 40 + FCS_LEN)
+ return;
+
+ /* and only beacons from the associated BSSID, please */
+ if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
+ !rt2x00dev->aid)
+ return;
+
+ rt2x00dev->last_beacon = jiffies;
+
+ tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
+ if (!tim)
+ return;
+
+ if (tim[1] < sizeof(*tim_ie))
+ return;
+
+ tim_len = tim[1];
+ tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+ /* Check whenever the PHY can be turned off again. */
+
+ /* 1. What about buffered unicast traffic for our AID? */
+ cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
+
+ /* 2. Maybe the AP wants to send multicast/broadcast data? */
+ cam |= (tim_ie->bitmap_ctrl & 0x01);
+
+ if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+ IEEE80211_CONF_CHANGE_PS);
+}
+
static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
struct rxdone_entry_desc *rxdesc)
{
@@ -511,8 +599,6 @@
(rxdesc.size > header_length) &&
(rxdesc.dev_flags & RXDONE_L2PAD))
rt2x00queue_remove_l2pad(entry->skb, header_length);
- else
- rt2x00queue_align_payload(entry->skb, header_length);
/* Trim buffer to correct size */
skb_trim(entry->skb, rxdesc.size);
@@ -526,6 +612,12 @@
rxdesc.flags |= RX_FLAG_HT;
/*
+ * Check if this is a beacon, and more frames have been
+ * buffered while we were in powersaving mode.
+ */
+ rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
+
+ /*
* Update extra components
*/
rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
@@ -554,7 +646,7 @@
submit_entry:
entry->flags = 0;
- rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
+ rt2x00queue_index_inc(entry, Q_INDEX_DONE);
if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00dev->ops->lib->clear_entry(entry);
@@ -801,23 +893,28 @@
/*
* Take TX headroom required for alignment into account.
*/
- if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+ if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
- else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+ else if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags))
rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
/*
* Allocate tx status FIFO for driver use.
*/
- if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags)) {
+ if (test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags)) {
/*
- * Allocate txstatus fifo and tasklet, we use a size of 512
- * for the kfifo which is big enough to store 512/4=128 tx
- * status reports. In the worst case (tx status for all tx
- * queues gets reported before we've got a chance to handle
- * them) 24*4=384 tx status reports need to be cached.
+ * Allocate the txstatus fifo. In the worst case the tx
+ * status fifo has to hold the tx status of all entries
+ * in all tx queues. Hence, calculate the kfifo size as
+ * tx_queues * entry_num and round up to the nearest
+ * power of 2.
*/
- status = kfifo_alloc(&rt2x00dev->txstatus_fifo, 512,
+ int kfifo_size =
+ roundup_pow_of_two(rt2x00dev->ops->tx_queues *
+ rt2x00dev->ops->tx->entry_num *
+ sizeof(u32));
+
+ status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
GFP_KERNEL);
if (status)
return status;
@@ -1007,6 +1104,7 @@
}
INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+ INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
/*
* Let the driver probe the device to detect the capabilities.
@@ -1063,6 +1161,7 @@
*/
cancel_work_sync(&rt2x00dev->intf_work);
if (rt2x00_is_usb(rt2x00dev)) {
+ del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
cancel_work_sync(&rt2x00dev->txdone_work);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index be0ff78..f316aad 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -99,7 +99,7 @@
{
int retval;
- if (!test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags))
+ if (!test_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags))
return 0;
if (!rt2x00dev->fw) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
deleted file mode 100644
index ae1219d..0000000
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: rt2x00lib
- Abstract: rt2x00 HT specific routines.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "rt2x00.h"
-#include "rt2x00lib.h"
-
-void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
- struct txentry_desc *txdesc,
- const struct rt2x00_rate *hwrate)
-{
- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
- struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
-
- if (tx_info->control.sta)
- txdesc->u.ht.mpdu_density =
- tx_info->control.sta->ht_cap.ampdu_density;
-
- txdesc->u.ht.ba_size = 7; /* FIXME: What value is needed? */
-
- txdesc->u.ht.stbc =
- (tx_info->flags & IEEE80211_TX_CTL_STBC) >> IEEE80211_TX_CTL_STBC_SHIFT;
-
- /*
- * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the
- * mcs rate to be used
- */
- if (txrate->flags & IEEE80211_TX_RC_MCS) {
- txdesc->u.ht.mcs = txrate->idx;
-
- /*
- * MIMO PS should be set to 1 for STA's using dynamic SM PS
- * when using more then one tx stream (>MCS7).
- */
- if (tx_info->control.sta && txdesc->u.ht.mcs > 7 &&
- ((tx_info->control.sta->ht_cap.cap &
- IEEE80211_HT_CAP_SM_PS) >>
- IEEE80211_HT_CAP_SM_PS_SHIFT) ==
- WLAN_HT_CAP_SM_PS_DYNAMIC)
- __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags);
- } else {
- txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs);
- if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
- txdesc->u.ht.mcs |= 0x08;
- }
-
- /*
- * This frame is eligible for an AMPDU, however, don't aggregate
- * frames that are intended to probe a specific tx rate.
- */
- if (tx_info->flags & IEEE80211_TX_CTL_AMPDU &&
- !(tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
- __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags);
-
- /*
- * Set 40Mhz mode if necessary (for legacy rates this will
- * duplicate the frame to both channels).
- */
- if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH ||
- txrate->flags & IEEE80211_TX_RC_DUP_DATA)
- __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
- if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
- __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
-
- /*
- * Determine IFS values
- * - Use TXOP_BACKOFF for management frames
- * - Use TXOP_SIFS for fragment bursts
- * - Use TXOP_HTTXOP for everything else
- *
- * Note: rt2800 devices won't use CTS protection (if used)
- * for frames not transmitted with TXOP_HTTXOP
- */
- if (ieee80211_is_mgmt(hdr->frame_control))
- txdesc->u.ht.txop = TXOP_BACKOFF;
- else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
- txdesc->u.ht.txop = TXOP_SIFS;
- else
- txdesc->u.ht.txop = TXOP_HTTXOP;
-}
-
-u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf)
-{
- struct hw_mode_spec *spec = &rt2x00dev->spec;
- int center_channel;
- u16 i;
-
- /*
- * Initialize center channel to current channel.
- */
- center_channel = spec->channels[conf->channel->hw_value].channel;
-
- /*
- * Adjust center channel to HT40+ and HT40- operation.
- */
- if (conf_is_ht40_plus(conf))
- center_channel += 2;
- else if (conf_is_ht40_minus(conf))
- center_channel -= (center_channel == 14) ? 1 : 2;
-
- for (i = 0; i < spec->num_channels; i++)
- if (spec->channels[i].channel == center_channel)
- return i;
-
- WARN_ON(1);
- return conf->channel->hw_value;
-}
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 2d94cba..322cc4f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -32,6 +32,7 @@
*/
#define WATCHDOG_INTERVAL round_jiffies_relative(HZ)
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
+#define AGC_INTERVAL round_jiffies_relative(4 * HZ)
/*
* rt2x00_rate: Per rate device information
@@ -119,16 +120,6 @@
void rt2x00queue_align_frame(struct sk_buff *skb);
/**
- * rt2x00queue_align_payload - Align 802.11 payload to 4-byte boundary
- * @skb: The skb to align
- * @header_length: Length of 802.11 header
- *
- * Align the 802.11 payload to a 4-byte boundary, this could
- * mean the header is not aligned properly though.
- */
-void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length);
-
-/**
* rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary
* @skb: The skb to align
* @header_length: Length of 802.11 header
@@ -184,14 +175,14 @@
/**
* rt2x00queue_index_inc - Index incrementation function
- * @queue: Queue (&struct data_queue) to perform the action on.
+ * @entry: Queue entry (&struct queue_entry) to perform the action on.
* @index: Index type (&enum queue_index) to perform the action on.
*
- * This function will increase the requested index on the queue,
+ * This function will increase the requested index on the entry's queue,
* it will grab the appropriate locks and handle queue overflow events by
* resetting the index to the start of the queue.
*/
-void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
+void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index);
/**
* rt2x00queue_init_queues - Initialize all data queues
@@ -281,6 +272,18 @@
void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
/**
+ * rt2x00link_start_agc - Start periodic gain calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00link_stop_agc - Stop periodic gain calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev);
+
+/**
* rt2x00link_register - Initialize link tuning & watchdog functionality
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
@@ -385,41 +388,17 @@
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
/*
- * HT handlers.
- */
-#ifdef CONFIG_RT2X00_LIB_HT
-void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
- struct txentry_desc *txdesc,
- const struct rt2x00_rate *hwrate);
-
-u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf);
-#else
-static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
- struct txentry_desc *txdesc,
- const struct rt2x00_rate *hwrate)
-{
-}
-
-static inline u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf)
-{
- return conf->channel->hw_value;
-}
-#endif /* CONFIG_RT2X00_LIB_HT */
-
-/*
* RFkill handlers.
*/
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
- if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags))
wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
}
static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
- if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags))
wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 29abfde..ea10b00 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -192,17 +192,7 @@
/*
* Determine if software diversity is enabled for
* either the TX or RX antenna (or both).
- * Always perform this check since within the link
- * tuner interval the configuration might have changed.
*/
- ant->flags &= ~ANTENNA_RX_DIVERSITY;
- ant->flags &= ~ANTENNA_TX_DIVERSITY;
-
- if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
- ant->flags |= ANTENNA_RX_DIVERSITY;
- if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
- ant->flags |= ANTENNA_TX_DIVERSITY;
-
if (!(ant->flags & ANTENNA_RX_DIVERSITY) &&
!(ant->flags & ANTENNA_TX_DIVERSITY)) {
ant->flags = 0;
@@ -383,7 +373,7 @@
* do not support link tuning at all, while other devices can disable
* the feature from the EEPROM.
*/
- if (test_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags))
rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count);
/*
@@ -413,12 +403,11 @@
{
struct link *link = &rt2x00dev->link;
- if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
- !test_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags))
- return;
-
- ieee80211_queue_delayed_work(rt2x00dev->hw,
- &link->watchdog_work, WATCHDOG_INTERVAL);
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ rt2x00dev->ops->lib->watchdog)
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->watchdog_work,
+ WATCHDOG_INTERVAL);
}
void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev)
@@ -447,8 +436,46 @@
WATCHDOG_INTERVAL);
}
+void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev)
+{
+ struct link *link = &rt2x00dev->link;
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ rt2x00dev->ops->lib->gain_calibration)
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->agc_work,
+ AGC_INTERVAL);
+}
+
+void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev)
+{
+ cancel_delayed_work_sync(&rt2x00dev->link.agc_work);
+}
+
+static void rt2x00link_agc(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, link.agc_work.work);
+ struct link *link = &rt2x00dev->link;
+
+ /*
+ * When the radio is shutting down we should
+ * immediately cease the watchdog monitoring.
+ */
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ rt2x00dev->ops->lib->gain_calibration(rt2x00dev);
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->agc_work,
+ AGC_INTERVAL);
+}
+
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
{
+ INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc);
INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 661c6ba..93bec14 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -119,7 +119,7 @@
* Use the ATIM queue if appropriate and present.
*/
if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM &&
- test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
+ test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags))
qid = QID_ATIM;
queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
@@ -158,7 +158,7 @@
return;
exit_fail:
- ieee80211_stop_queue(rt2x00dev->hw, qid);
+ rt2x00queue_pause_queue(queue);
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
@@ -411,11 +411,11 @@
* of different types, but has no a separate filter for PS Poll frames,
* FIF_CONTROL flag implies FIF_PSPOLL.
*/
- if (!test_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags)) {
+ if (!test_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags)) {
if (*total_flags & FIF_CONTROL || *total_flags & FIF_PSPOLL)
*total_flags |= FIF_CONTROL | FIF_PSPOLL;
}
- if (!test_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags)) {
+ if (!test_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags)) {
if (*total_flags & FIF_CONTROL)
*total_flags |= FIF_PSPOLL;
}
@@ -496,7 +496,7 @@
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
- else if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ else if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags))
return -EOPNOTSUPP;
else if (key->keylen > 32)
return -ENOSPC;
@@ -562,7 +562,7 @@
void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- __set_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
rt2x00link_stop_tuner(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_start);
@@ -570,7 +570,7 @@
void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- __clear_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
+ clear_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
rt2x00link_start_tuner(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_complete);
@@ -737,3 +737,84 @@
rt2x00queue_flush_queue(queue, drop);
}
EXPORT_SYMBOL_GPL(rt2x00mac_flush);
+
+int rt2x00mac_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct link_ant *ant = &rt2x00dev->link.ant;
+ struct antenna_setup *def = &rt2x00dev->default_ant;
+ struct antenna_setup setup;
+
+ // The antenna value is not supposed to be 0,
+ // or exceed the maximum number of antenna's.
+ if (!tx_ant || (tx_ant & ~3) || !rx_ant || (rx_ant & ~3))
+ return -EINVAL;
+
+ // When the client tried to configure the antenna to or from
+ // diversity mode, we must reset the default antenna as well
+ // as that controls the diversity switch.
+ if (ant->flags & ANTENNA_TX_DIVERSITY && tx_ant != 3)
+ ant->flags &= ~ANTENNA_TX_DIVERSITY;
+ if (ant->flags & ANTENNA_RX_DIVERSITY && rx_ant != 3)
+ ant->flags &= ~ANTENNA_RX_DIVERSITY;
+
+ // If diversity is being enabled, check if we need hardware
+ // or software diversity. In the latter case, reset the value,
+ // and make sure we update the antenna flags to have the
+ // link tuner pick up the diversity tuning.
+ if (tx_ant == 3 && def->tx == ANTENNA_SW_DIVERSITY) {
+ tx_ant = ANTENNA_SW_DIVERSITY;
+ ant->flags |= ANTENNA_TX_DIVERSITY;
+ }
+
+ if (rx_ant == 3 && def->rx == ANTENNA_SW_DIVERSITY) {
+ rx_ant = ANTENNA_SW_DIVERSITY;
+ ant->flags |= ANTENNA_RX_DIVERSITY;
+ }
+
+ setup.tx = tx_ant;
+ setup.rx = rx_ant;
+
+ rt2x00lib_config_antenna(rt2x00dev, setup);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_antenna);
+
+int rt2x00mac_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct link_ant *ant = &rt2x00dev->link.ant;
+ struct antenna_setup *active = &rt2x00dev->link.ant.active;
+
+ // When software diversity is active, we must report this to the
+ // client and not the current active antenna state.
+ if (ant->flags & ANTENNA_TX_DIVERSITY)
+ *tx_ant = ANTENNA_HW_DIVERSITY;
+ else
+ *tx_ant = active->tx;
+
+ if (ant->flags & ANTENNA_RX_DIVERSITY)
+ *rx_ant = ANTENNA_HW_DIVERSITY;
+ else
+ *rx_ant = active->rx;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_get_antenna);
+
+void rt2x00mac_get_ringparam(struct ieee80211_hw *hw,
+ u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct data_queue *queue;
+
+ tx_queue_for_each(rt2x00dev, queue) {
+ *tx += queue->length;
+ *tx_max += queue->limit;
+ }
+
+ *rx = rt2x00dev->rx->length;
+ *rx_max = rt2x00dev->rx->limit;
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_get_ringparam);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 4dd82b0..17148bb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -60,14 +60,15 @@
}
EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
-void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue = rt2x00dev->rx;
struct queue_entry *entry;
struct queue_entry_priv_pci *entry_priv;
struct skb_frame_desc *skbdesc;
+ int max_rx = 16;
- while (1) {
+ while (--max_rx) {
entry = rt2x00queue_get_entry(queue, Q_INDEX);
entry_priv = entry->priv_data;
@@ -93,9 +94,20 @@
*/
rt2x00lib_rxdone(entry);
}
+
+ return !max_rx;
}
EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
+{
+ unsigned int i;
+
+ for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
+ msleep(10);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
+
/*
* Device initialization handlers.
*/
@@ -239,9 +251,8 @@
return -ENOMEM;
}
-int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
+int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
{
- struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_data;
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 746ce8f..e2c99f2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -101,8 +101,21 @@
/**
* rt2x00pci_rxdone - Handle RX done events
* @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ *
+ * Returns true if there are still rx frames pending and false if all
+ * pending rx frames were processed.
*/
-void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00pci_flush_queue - Flush data queue
+ * @queue: Data queue to stop
+ * @drop: True to drop all pending frames.
+ *
+ * This will wait for a maximum of 100ms, waiting for the queues
+ * to become empty.
+ */
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
/*
* Device initialization handlers.
@@ -113,7 +126,7 @@
/*
* PCI driver handlers.
*/
-int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id);
+int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops);
void rt2x00pci_remove(struct pci_dev *pci_dev);
#ifdef CONFIG_PM
int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4358051..ab8c16f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -60,7 +60,7 @@
* at least 8 bytes bytes available in headroom for IV/EIV
* and 8 bytes for ICV data as tailroon.
*/
- if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) {
head_size += 8;
tail_size += 8;
}
@@ -86,7 +86,7 @@
memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->entry = entry;
- if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) {
+ if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) {
skbdesc->skb_dma = dma_map_single(rt2x00dev->dev,
skb->data,
skb->len,
@@ -148,19 +148,6 @@
skb_trim(skb, frame_length);
}
-void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length)
-{
- unsigned int frame_length = skb->len;
- unsigned int align = ALIGN_SIZE(skb, header_length);
-
- if (!align)
- return;
-
- skb_push(skb, align);
- memmove(skb->data, skb->data + align, frame_length);
- skb_trim(skb, frame_length);
-}
-
void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
{
unsigned int payload_length = skb->len - header_length;
@@ -226,7 +213,7 @@
__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
- if (!test_bit(DRIVER_REQUIRE_SW_SEQNO, &entry->queue->rt2x00dev->flags))
+ if (!test_bit(REQUIRE_SW_SEQNO, &entry->queue->rt2x00dev->cap_flags))
return;
/*
@@ -315,6 +302,85 @@
}
}
+static void rt2x00queue_create_tx_descriptor_ht(struct queue_entry *entry,
+ struct txentry_desc *txdesc,
+ const struct rt2x00_rate *hwrate)
+{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+
+ if (tx_info->control.sta)
+ txdesc->u.ht.mpdu_density =
+ tx_info->control.sta->ht_cap.ampdu_density;
+
+ txdesc->u.ht.ba_size = 7; /* FIXME: What value is needed? */
+
+ /*
+ * Only one STBC stream is supported for now.
+ */
+ if (tx_info->flags & IEEE80211_TX_CTL_STBC)
+ txdesc->u.ht.stbc = 1;
+
+ /*
+ * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the
+ * mcs rate to be used
+ */
+ if (txrate->flags & IEEE80211_TX_RC_MCS) {
+ txdesc->u.ht.mcs = txrate->idx;
+
+ /*
+ * MIMO PS should be set to 1 for STA's using dynamic SM PS
+ * when using more then one tx stream (>MCS7).
+ */
+ if (tx_info->control.sta && txdesc->u.ht.mcs > 7 &&
+ ((tx_info->control.sta->ht_cap.cap &
+ IEEE80211_HT_CAP_SM_PS) >>
+ IEEE80211_HT_CAP_SM_PS_SHIFT) ==
+ WLAN_HT_CAP_SM_PS_DYNAMIC)
+ __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags);
+ } else {
+ txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs);
+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ txdesc->u.ht.mcs |= 0x08;
+ }
+
+ /*
+ * This frame is eligible for an AMPDU, however, don't aggregate
+ * frames that are intended to probe a specific tx rate.
+ */
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU &&
+ !(tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
+ __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags);
+
+ /*
+ * Set 40Mhz mode if necessary (for legacy rates this will
+ * duplicate the frame to both channels).
+ */
+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH ||
+ txrate->flags & IEEE80211_TX_RC_DUP_DATA)
+ __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
+ if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
+ __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
+
+ /*
+ * Determine IFS values
+ * - Use TXOP_BACKOFF for management frames except beacons
+ * - Use TXOP_SIFS for fragment bursts
+ * - Use TXOP_HTTXOP for everything else
+ *
+ * Note: rt2800 devices won't use CTS protection (if used)
+ * for frames not transmitted with TXOP_HTTXOP
+ */
+ if (ieee80211_is_mgmt(hdr->frame_control) &&
+ !ieee80211_is_beacon(hdr->frame_control))
+ txdesc->u.ht.txop = TXOP_BACKOFF;
+ else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
+ txdesc->u.ht.txop = TXOP_SIFS;
+ else
+ txdesc->u.ht.txop = TXOP_HTTXOP;
+}
+
static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
@@ -409,8 +475,8 @@
rt2x00crypto_create_tx_descriptor(entry, txdesc);
rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
- if (test_bit(DRIVER_REQUIRE_HT_TX_DESC, &rt2x00dev->flags))
- rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate);
+ if (test_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags))
+ rt2x00queue_create_tx_descriptor_ht(entry, txdesc, hwrate);
else
rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
}
@@ -449,7 +515,7 @@
/*
* Map the skb to DMA.
*/
- if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+ if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags))
rt2x00queue_map_txskb(entry);
return 0;
@@ -495,8 +561,11 @@
struct skb_frame_desc *skbdesc;
u8 rate_idx, rate_flags;
- if (unlikely(rt2x00queue_full(queue)))
+ if (unlikely(rt2x00queue_full(queue))) {
+ ERROR(queue->rt2x00dev,
+ "Dropping frame due to full tx queue %d.\n", queue->qid);
return -ENOBUFS;
+ }
if (unlikely(test_and_set_bit(ENTRY_OWNER_DEVICE_DATA,
&entry->flags))) {
@@ -539,7 +608,7 @@
*/
if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
- if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags))
+ if (test_bit(REQUIRE_COPY_IV, &queue->rt2x00dev->cap_flags))
rt2x00crypto_tx_copy_iv(skb, &txdesc);
else
rt2x00crypto_tx_remove_iv(skb, &txdesc);
@@ -553,9 +622,9 @@
* PCI and USB devices, while header alignment only is valid
* for PCI devices.
*/
- if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags))
+ if (test_bit(REQUIRE_L2PAD, &queue->rt2x00dev->cap_flags))
rt2x00queue_insert_l2pad(entry->skb, txdesc.header_length);
- else if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
+ else if (test_bit(REQUIRE_DMA, &queue->rt2x00dev->cap_flags))
rt2x00queue_align_frame(entry->skb);
/*
@@ -571,7 +640,7 @@
set_bit(ENTRY_DATA_PENDING, &entry->flags);
- rt2x00queue_index_inc(queue, Q_INDEX);
+ rt2x00queue_index_inc(entry, Q_INDEX);
rt2x00queue_write_tx_descriptor(entry, &txdesc);
rt2x00queue_kick_tx_queue(queue, &txdesc);
@@ -660,10 +729,12 @@
return ret;
}
-void rt2x00queue_for_each_entry(struct data_queue *queue,
+bool rt2x00queue_for_each_entry(struct data_queue *queue,
enum queue_index start,
enum queue_index end,
- void (*fn)(struct queue_entry *entry))
+ void *data,
+ bool (*fn)(struct queue_entry *entry,
+ void *data))
{
unsigned long irqflags;
unsigned int index_start;
@@ -674,7 +745,7 @@
ERROR(queue->rt2x00dev,
"Entry requested from invalid index range (%d - %d)\n",
start, end);
- return;
+ return true;
}
/*
@@ -693,15 +764,23 @@
* send out all frames in the correct order.
*/
if (index_start < index_end) {
- for (i = index_start; i < index_end; i++)
- fn(&queue->entries[i]);
+ for (i = index_start; i < index_end; i++) {
+ if (fn(&queue->entries[i], data))
+ return true;
+ }
} else {
- for (i = index_start; i < queue->limit; i++)
- fn(&queue->entries[i]);
+ for (i = index_start; i < queue->limit; i++) {
+ if (fn(&queue->entries[i], data))
+ return true;
+ }
- for (i = 0; i < index_end; i++)
- fn(&queue->entries[i]);
+ for (i = 0; i < index_end; i++) {
+ if (fn(&queue->entries[i], data))
+ return true;
+ }
}
+
+ return false;
}
EXPORT_SYMBOL_GPL(rt2x00queue_for_each_entry);
@@ -727,8 +806,9 @@
}
EXPORT_SYMBOL_GPL(rt2x00queue_get_entry);
-void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
+void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index)
{
+ struct data_queue *queue = entry->queue;
unsigned long irqflags;
if (unlikely(index >= Q_INDEX_MAX)) {
@@ -743,7 +823,7 @@
if (queue->index[index] >= queue->limit)
queue->index[index] = 0;
- queue->last_action[index] = jiffies;
+ entry->last_action = jiffies;
if (index == Q_INDEX) {
queue->length++;
@@ -848,7 +928,6 @@
void rt2x00queue_flush_queue(struct data_queue *queue, bool drop)
{
- unsigned int i;
bool started;
bool tx_queue =
(queue->qid == QID_AC_VO) ||
@@ -883,20 +962,12 @@
}
/*
- * Check if driver supports flushing, we can only guarantee
- * full support for flushing if the driver is able
- * to cancel all pending frames (drop = true).
+ * Check if driver supports flushing, if that is the case we can
+ * defer the flushing to the driver. Otherwise we must use the
+ * alternative which just waits for the queue to become empty.
*/
- if (drop && queue->rt2x00dev->ops->lib->flush_queue)
- queue->rt2x00dev->ops->lib->flush_queue(queue);
-
- /*
- * When we don't want to drop any frames, or when
- * the driver doesn't fully flush the queue correcly,
- * we must wait for the queue to become empty.
- */
- for (i = 0; !rt2x00queue_empty(queue) && i < 100; i++)
- msleep(10);
+ if (likely(queue->rt2x00dev->ops->lib->flush_queue))
+ queue->rt2x00dev->ops->lib->flush_queue(queue, drop);
/*
* The queue flush has failed...
@@ -969,10 +1040,8 @@
queue->count = 0;
queue->length = 0;
- for (i = 0; i < Q_INDEX_MAX; i++) {
+ for (i = 0; i < Q_INDEX_MAX; i++)
queue->index[i] = 0;
- queue->last_action[i] = jiffies;
- }
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
@@ -1079,7 +1148,7 @@
if (status)
goto exit;
- if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) {
+ if (test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags)) {
status = rt2x00queue_alloc_entries(rt2x00dev->atim,
rt2x00dev->ops->atim);
if (status)
@@ -1131,7 +1200,7 @@
struct data_queue *queue;
enum data_queue_qid qid;
unsigned int req_atim =
- !!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
+ !!test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
/*
* We need the following queues:
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 217861f..167d458 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -217,6 +217,7 @@
TXDONE_FALLBACK,
TXDONE_FAILURE,
TXDONE_EXCESSIVE_RETRY,
+ TXDONE_AMPDU,
};
/**
@@ -363,6 +364,7 @@
* struct queue_entry: Entry inside the &struct data_queue
*
* @flags: Entry flags, see &enum queue_entry_flags.
+ * @last_action: Timestamp of last change.
* @queue: The data queue (&struct data_queue) to which this entry belongs.
* @skb: The buffer which is currently being transmitted (for TX queue),
* or used to directly receive data in (for RX queue).
@@ -372,6 +374,7 @@
*/
struct queue_entry {
unsigned long flags;
+ unsigned long last_action;
struct data_queue *queue;
@@ -462,7 +465,6 @@
unsigned short threshold;
unsigned short length;
unsigned short index[Q_INDEX_MAX];
- unsigned long last_action[Q_INDEX_MAX];
unsigned short txop;
unsigned short aifs;
@@ -579,16 +581,22 @@
* @queue: Pointer to @data_queue
* @start: &enum queue_index Pointer to start index
* @end: &enum queue_index Pointer to end index
+ * @data: Data to pass to the callback function
* @fn: The function to call for each &struct queue_entry
*
* This will walk through all entries in the queue, in chronological
* order. This means it will start at the current @start pointer
* and will walk through the queue until it reaches the @end pointer.
+ *
+ * If fn returns true for an entry rt2x00queue_for_each_entry will stop
+ * processing and return true as well.
*/
-void rt2x00queue_for_each_entry(struct data_queue *queue,
+bool rt2x00queue_for_each_entry(struct data_queue *queue,
enum queue_index start,
enum queue_index end,
- void (*fn)(struct queue_entry *entry));
+ void *data,
+ bool (*fn)(struct queue_entry *entry,
+ void *data));
/**
* rt2x00queue_empty - Check if the queue is empty.
@@ -628,22 +636,24 @@
/**
* rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports
- * @queue: Queue to check.
+ * @entry: Queue entry to check.
*/
-static inline int rt2x00queue_status_timeout(struct data_queue *queue)
+static inline int rt2x00queue_status_timeout(struct queue_entry *entry)
{
- return time_after(queue->last_action[Q_INDEX_DMA_DONE],
- queue->last_action[Q_INDEX_DONE] + (HZ / 10));
+ if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
+ return false;
+ return time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
}
/**
- * rt2x00queue_timeout - Check if a timeout occurred for DMA transfers
- * @queue: Queue to check.
+ * rt2x00queue_dma_timeout - Check if a timeout occurred for DMA transfers
+ * @entry: Queue entry to check.
*/
-static inline int rt2x00queue_dma_timeout(struct data_queue *queue)
+static inline int rt2x00queue_dma_timeout(struct queue_entry *entry)
{
- return time_after(queue->last_action[Q_INDEX],
- queue->last_action[Q_INDEX_DMA_DONE] + (HZ / 10));
+ if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ return false;
+ return time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
}
/**
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 36f388f..8f90f62 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -165,6 +165,59 @@
}
EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read);
+
+struct rt2x00_async_read_data {
+ __le32 reg;
+ struct usb_ctrlrequest cr;
+ struct rt2x00_dev *rt2x00dev;
+ bool (*callback)(struct rt2x00_dev *, int, u32);
+};
+
+static void rt2x00usb_register_read_async_cb(struct urb *urb)
+{
+ struct rt2x00_async_read_data *rd = urb->context;
+ if (rd->callback(rd->rt2x00dev, urb->status, le32_to_cpu(rd->reg))) {
+ if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+ kfree(rd);
+ } else
+ kfree(rd);
+}
+
+void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ bool (*callback)(struct rt2x00_dev*, int, u32))
+{
+ struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+ struct urb *urb;
+ struct rt2x00_async_read_data *rd;
+
+ rd = kmalloc(sizeof(*rd), GFP_ATOMIC);
+ if (!rd)
+ return;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ kfree(rd);
+ return;
+ }
+
+ rd->rt2x00dev = rt2x00dev;
+ rd->callback = callback;
+ rd->cr.bRequestType = USB_VENDOR_REQUEST_IN;
+ rd->cr.bRequest = USB_MULTI_READ;
+ rd->cr.wValue = 0;
+ rd->cr.wIndex = cpu_to_le16(offset);
+ rd->cr.wLength = cpu_to_le16(sizeof(u32));
+
+ usb_fill_control_urb(urb, usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ (unsigned char *)(&rd->cr), &rd->reg, sizeof(rd->reg),
+ rt2x00usb_register_read_async_cb, rd);
+ if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+ kfree(rd);
+ usb_free_urb(urb);
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_register_read_async);
+
/*
* TX data handlers.
*/
@@ -212,6 +265,9 @@
if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
+ if (rt2x00dev->ops->lib->tx_dma_done)
+ rt2x00dev->ops->lib->tx_dma_done(entry);
+
/*
* Report the frame as DMA done
*/
@@ -227,10 +283,12 @@
* Schedule the delayed work for reading the TX status
* from the device.
*/
- queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
+ if (!test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags) ||
+ !kfifo_is_empty(&rt2x00dev->txstatus_fifo))
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
}
-static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
+static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void* data)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
@@ -240,7 +298,7 @@
if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags) ||
test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
- return;
+ return false;
/*
* USB devices cannot blindly pass the skb->len as the
@@ -261,6 +319,8 @@
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
rt2x00lib_dmadone(entry);
}
+
+ return false;
}
/*
@@ -323,7 +383,7 @@
queue_work(rt2x00dev->workqueue, &rt2x00dev->rxdone_work);
}
-static void rt2x00usb_kick_rx_entry(struct queue_entry *entry)
+static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void* data)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
@@ -332,7 +392,7 @@
if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
- return;
+ return false;
rt2x00lib_dmastart(entry);
@@ -348,6 +408,8 @@
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
rt2x00lib_dmadone(entry);
}
+
+ return false;
}
void rt2x00usb_kick_queue(struct data_queue *queue)
@@ -358,12 +420,18 @@
case QID_AC_BE:
case QID_AC_BK:
if (!rt2x00queue_empty(queue))
- rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
+ rt2x00queue_for_each_entry(queue,
+ Q_INDEX_DONE,
+ Q_INDEX,
+ NULL,
rt2x00usb_kick_tx_entry);
break;
case QID_RX:
if (!rt2x00queue_full(queue))
- rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
+ rt2x00queue_for_each_entry(queue,
+ Q_INDEX_DONE,
+ Q_INDEX,
+ NULL,
rt2x00usb_kick_rx_entry);
break;
default:
@@ -372,14 +440,14 @@
}
EXPORT_SYMBOL_GPL(rt2x00usb_kick_queue);
-static void rt2x00usb_flush_entry(struct queue_entry *entry)
+static bool rt2x00usb_flush_entry(struct queue_entry *entry, void* data)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
- return;
+ return false;
usb_kill_urb(entry_priv->urb);
@@ -387,17 +455,20 @@
* Kill guardian urb (if required by driver).
*/
if ((entry->queue->qid == QID_BEACON) &&
- (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)))
+ (test_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags)))
usb_kill_urb(bcn_priv->guardian_urb);
+
+ return false;
}
-void rt2x00usb_flush_queue(struct data_queue *queue)
+void rt2x00usb_flush_queue(struct data_queue *queue, bool drop)
{
struct work_struct *completion;
unsigned int i;
- rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
- rt2x00usb_flush_entry);
+ if (drop)
+ rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX, NULL,
+ rt2x00usb_flush_entry);
/*
* Obtain the queue completion handler
@@ -416,7 +487,7 @@
return;
}
- for (i = 0; i < 20; i++) {
+ for (i = 0; i < 10; i++) {
/*
* Check if the driver is already done, otherwise we
* have to sleep a little while to give the driver/hw
@@ -456,15 +527,31 @@
queue_work(queue->rt2x00dev->workqueue, &queue->rt2x00dev->txdone_work);
}
+static int rt2x00usb_status_timeout(struct data_queue *queue)
+{
+ struct queue_entry *entry;
+
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+ return rt2x00queue_status_timeout(entry);
+}
+
+static int rt2x00usb_dma_timeout(struct data_queue *queue)
+{
+ struct queue_entry *entry;
+
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE);
+ return rt2x00queue_dma_timeout(entry);
+}
+
void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
tx_queue_for_each(rt2x00dev, queue) {
if (!rt2x00queue_empty(queue)) {
- if (rt2x00queue_dma_timeout(queue))
+ if (rt2x00usb_dma_timeout(queue))
rt2x00usb_watchdog_tx_dma(queue);
- if (rt2x00queue_status_timeout(queue))
+ if (rt2x00usb_status_timeout(queue))
rt2x00usb_watchdog_tx_status(queue);
}
}
@@ -489,7 +576,7 @@
entry->flags = 0;
if (entry->queue->qid == QID_RX)
- rt2x00usb_kick_rx_entry(entry);
+ rt2x00usb_kick_rx_entry(entry, NULL);
}
EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
@@ -583,7 +670,7 @@
* then we are done.
*/
if (queue->qid != QID_BEACON ||
- !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+ !test_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags))
return 0;
for (i = 0; i < queue->limit; i++) {
@@ -618,7 +705,7 @@
* then we are done.
*/
if (queue->qid != QID_BEACON ||
- !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+ !test_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags))
return;
for (i = 0; i < queue->limit; i++) {
@@ -707,10 +794,9 @@
}
int rt2x00usb_probe(struct usb_interface *usb_intf,
- const struct usb_device_id *id)
+ const struct rt2x00_ops *ops)
{
struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
- struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
@@ -735,6 +821,7 @@
INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone);
INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone);
+ init_timer(&rt2x00dev->txstatus_timer);
retval = rt2x00usb_alloc_reg(rt2x00dev);
if (retval)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index e11c759..323ca7b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -35,12 +35,6 @@
})
/*
- * This variable should be used with the
- * usb_driver structure initialization.
- */
-#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops)
-
-/*
* For USB vendor requests we need to pass a timeout
* time in ms, for this we use the REGISTER_TIMEOUT,
* however when loading firmware a higher value is
@@ -345,6 +339,23 @@
const struct rt2x00_field32 field,
u32 *reg);
+/**
+ * rt2x00usb_register_read_async - Asynchronously read 32bit register word
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @callback: Functon to call when read completes.
+ *
+ * Submit a control URB to read a 32bit register. This safe to
+ * be called from atomic context. The callback will be called
+ * when the URB completes. Otherwise the function is similar
+ * to rt2x00usb_register_read().
+ * When the callback function returns false, the memory will be cleaned up,
+ * when it returns true, the urb will be fired again.
+ */
+void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ bool (*callback)(struct rt2x00_dev*, int, u32));
+
/*
* Radio handlers
*/
@@ -389,11 +400,13 @@
/**
* rt2x00usb_flush_queue - Flush data queue
* @queue: Data queue to stop
+ * @drop: True to drop all pending frames.
*
- * This will walk through all entries of the queue and kill all
- * URB's which were send to the device.
+ * This will walk through all entries of the queue and will optionally
+ * kill all URB's which were send to the device, or at least wait until
+ * they have been returned from the device..
*/
-void rt2x00usb_flush_queue(struct data_queue *queue);
+void rt2x00usb_flush_queue(struct data_queue *queue, bool drop);
/**
* rt2x00usb_watchdog - Watchdog for USB communication
@@ -416,7 +429,7 @@
* USB driver handlers.
*/
int rt2x00usb_probe(struct usb_interface *usb_intf,
- const struct usb_device_id *id);
+ const struct rt2x00_ops *ops);
void rt2x00usb_disconnect(struct usb_interface *usb_intf);
#ifdef CONFIG_PM
int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 77e8113..9d35ec1 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -683,7 +683,7 @@
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529));
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
+ !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags));
/*
* Configure the RX antenna.
@@ -811,10 +811,10 @@
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
sel = antenna_sel_a;
- lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+ lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
} else {
sel = antenna_sel_bg;
- lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+ lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
}
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
@@ -834,7 +834,7 @@
else if (rt2x00_rf(rt2x00dev, RF2527))
rt61pci_config_antenna_2x(rt2x00dev, ant);
else if (rt2x00_rf(rt2x00dev, RF2529)) {
- if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags))
rt61pci_config_antenna_2x(rt2x00dev, ant);
else
rt61pci_config_antenna_2529(rt2x00dev, ant);
@@ -848,13 +848,13 @@
short lna_gain = 0;
if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
lna_gain += 14;
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
} else {
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
lna_gain += 14;
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
@@ -1050,14 +1050,14 @@
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
low_bound = 0x28;
up_bound = 0x48;
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
low_bound += 0x10;
up_bound += 0x10;
}
} else {
low_bound = 0x20;
up_bound = 0x40;
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) {
low_bound += 0x10;
up_bound += 0x10;
}
@@ -2260,8 +2260,8 @@
rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static void rt61pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_field32 irq_field)
+static inline void rt61pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
{
u32 reg;
@@ -2313,8 +2313,10 @@
static void rt61pci_rxdone_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- rt2x00pci_rxdone(rt2x00dev);
- rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE);
+ if (rt2x00pci_rxdone(rt2x00dev))
+ rt2x00pci_rxdone(rt2x00dev);
+ else
+ rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE);
}
static void rt61pci_autowake_tasklet(unsigned long data)
@@ -2535,7 +2537,7 @@
* Determine number of antennas.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
- __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags);
/*
* Identify default antenna configuration.
@@ -2549,20 +2551,20 @@
* Read the Frame type.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
- __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags);
/*
* Detect if this device has a hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Read frequency offset and RF programming sequence.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
- __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags);
rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
@@ -2572,9 +2574,9 @@
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
- __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
- __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
/*
* When working with a RF2529 chip without double antenna,
@@ -2582,7 +2584,7 @@
* eeprom word.
*/
if (rt2x00_rf(rt2x00dev, RF2529) &&
- !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
+ !test_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags)) {
rt2x00dev->default_ant.rx =
ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED);
rt2x00dev->default_ant.tx =
@@ -2797,7 +2799,7 @@
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
+ if (!test_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags)) {
spec->num_channels = 14;
spec->channels = rf_vals_noseq;
} else {
@@ -2867,16 +2869,16 @@
* This device has multiple filters for control frames,
* but has no a separate filter for PS Poll frames.
*/
- __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
/*
* This device requires firmware and DMA mapped skbs.
*/
- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
if (!modparam_nohwcrypt)
- __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
@@ -2977,6 +2979,9 @@
.get_tsf = rt61pci_get_tsf,
.rfkill_poll = rt2x00mac_rfkill_poll,
.flush = rt2x00mac_flush,
+ .set_antenna = rt2x00mac_set_antenna,
+ .get_antenna = rt2x00mac_get_antenna,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
@@ -3001,6 +3006,7 @@
.start_queue = rt61pci_start_queue,
.kick_queue = rt61pci_kick_queue,
.stop_queue = rt61pci_stop_queue,
+ .flush_queue = rt2x00pci_flush_queue,
.write_tx_desc = rt61pci_write_tx_desc,
.write_beacon = rt61pci_write_beacon,
.clear_beacon = rt61pci_clear_beacon,
@@ -3058,11 +3064,11 @@
*/
static DEFINE_PCI_DEVICE_TABLE(rt61pci_device_table) = {
/* RT2561s */
- { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0301) },
/* RT2561 v2 */
- { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0302) },
/* RT2661 */
- { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0401) },
{ 0, }
};
@@ -3077,10 +3083,16 @@
MODULE_FIRMWARE(FIRMWARE_RT2661);
MODULE_LICENSE("GPL");
+static int rt61pci_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ return rt2x00pci_probe(pci_dev, &rt61pci_ops);
+}
+
static struct pci_driver rt61pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt61pci_device_table,
- .probe = rt2x00pci_probe,
+ .probe = rt61pci_probe,
.remove = __devexit_p(rt2x00pci_remove),
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 02f1148..ad20953 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -595,7 +595,7 @@
switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
- temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
+ temp = !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags)
&& (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
break;
@@ -636,7 +636,7 @@
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
+ !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags));
/*
* Configure the RX antenna.
@@ -709,10 +709,10 @@
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
sel = antenna_sel_a;
- lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+ lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
} else {
sel = antenna_sel_bg;
- lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+ lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
}
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
@@ -740,7 +740,7 @@
short lna_gain = 0;
if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
lna_gain += 14;
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
@@ -930,7 +930,7 @@
low_bound = 0x28;
up_bound = 0x48;
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
low_bound += 0x10;
up_bound += 0x10;
}
@@ -946,7 +946,7 @@
up_bound = 0x1c;
}
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) {
low_bound += 0x14;
up_bound += 0x10;
}
@@ -1661,7 +1661,7 @@
}
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
+ if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
if (lna == 3 || lna == 2)
offset += 10;
} else {
@@ -1899,13 +1899,13 @@
* Read the Frame type.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
- __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags);
/*
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Read frequency offset.
@@ -1919,8 +1919,8 @@
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
- __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
- __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
}
/*
@@ -2200,16 +2200,16 @@
* This device has multiple filters for control frames,
* but has no a separate filter for PS Poll frames.
*/
- __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
/*
* This device requires firmware.
*/
- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
if (!modparam_nohwcrypt)
- __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
- __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
@@ -2311,6 +2311,9 @@
.get_tsf = rt73usb_get_tsf,
.rfkill_poll = rt2x00mac_rfkill_poll,
.flush = rt2x00mac_flush,
+ .set_antenna = rt2x00mac_set_antenna,
+ .get_antenna = rt2x00mac_get_antenna,
+ .get_ringparam = rt2x00mac_get_ringparam,
};
static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
@@ -2389,114 +2392,113 @@
*/
static struct usb_device_id rt73usb_device_table[] = {
/* AboCom */
- { USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21b) },
+ { USB_DEVICE(0x07b8, 0xb21c) },
+ { USB_DEVICE(0x07b8, 0xb21d) },
+ { USB_DEVICE(0x07b8, 0xb21e) },
+ { USB_DEVICE(0x07b8, 0xb21f) },
/* AL */
- { USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c10) },
/* Amigo */
- { USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x148f, 0x9021) },
+ { USB_DEVICE(0x0eb0, 0x9021) },
/* AMIT */
- { USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x18c5, 0x0002) },
/* Askey */
- { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1690, 0x0722) },
/* ASUS */
- { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1723) },
+ { USB_DEVICE(0x0b05, 0x1724) },
/* Belkin */
- { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x050d, 0x705a) },
+ { USB_DEVICE(0x050d, 0x905b) },
+ { USB_DEVICE(0x050d, 0x905c) },
/* Billionton */
- { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1631, 0xc019) },
+ { USB_DEVICE(0x08dd, 0x0120) },
/* Buffalo */
- { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0411, 0x00d9), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0411, 0x0137), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x00d8) },
+ { USB_DEVICE(0x0411, 0x00d9) },
+ { USB_DEVICE(0x0411, 0x00f4) },
+ { USB_DEVICE(0x0411, 0x0116) },
+ { USB_DEVICE(0x0411, 0x0119) },
+ { USB_DEVICE(0x0411, 0x0137) },
/* CEIVA */
- { USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x178d, 0x02be) },
/* CNet */
- { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1371, 0x9022) },
+ { USB_DEVICE(0x1371, 0x9032) },
/* Conceptronic */
- { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c22) },
/* Corega */
- { USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07aa, 0x002e) },
/* D-Link */
- { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c03) },
+ { USB_DEVICE(0x07d1, 0x3c04) },
+ { USB_DEVICE(0x07d1, 0x3c06) },
+ { USB_DEVICE(0x07d1, 0x3c07) },
/* Edimax */
- { USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x7392, 0x7318) },
+ { USB_DEVICE(0x7392, 0x7618) },
/* EnGenius */
- { USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1740, 0x3701) },
/* Gemtek */
- { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x15a9, 0x0004) },
/* Gigabyte */
- { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1044, 0x8008) },
+ { USB_DEVICE(0x1044, 0x800a) },
/* Huawei-3Com */
- { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1472, 0x0009) },
/* Hercules */
- { USB_DEVICE(0x06f8, 0xe002), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x06f8, 0xe002) },
+ { USB_DEVICE(0x06f8, 0xe010) },
+ { USB_DEVICE(0x06f8, 0xe020) },
/* Linksys */
- { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x13b1, 0x0020) },
+ { USB_DEVICE(0x13b1, 0x0023) },
+ { USB_DEVICE(0x13b1, 0x0028) },
/* MSI */
- { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0db0, 0x4600) },
+ { USB_DEVICE(0x0db0, 0x6877) },
+ { USB_DEVICE(0x0db0, 0x6874) },
+ { USB_DEVICE(0x0db0, 0xa861) },
+ { USB_DEVICE(0x0db0, 0xa874) },
/* Ovislink */
- { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1b75, 0x7318) },
/* Ralink */
- { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0812, 0x3101), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x04bb, 0x093d) },
+ { USB_DEVICE(0x148f, 0x2573) },
+ { USB_DEVICE(0x148f, 0x2671) },
+ { USB_DEVICE(0x0812, 0x3101) },
/* Qcom */
- { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x18e8, 0x6196) },
+ { USB_DEVICE(0x18e8, 0x6229) },
+ { USB_DEVICE(0x18e8, 0x6238) },
/* Samsung */
- { USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x04e8, 0x4471) },
/* Senao */
- { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x1740, 0x7100) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0024) },
+ { USB_DEVICE(0x0df6, 0x0027) },
+ { USB_DEVICE(0x0df6, 0x002f) },
+ { USB_DEVICE(0x0df6, 0x90ac) },
+ { USB_DEVICE(0x0df6, 0x9712) },
/* Surecom */
- { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0769, 0x31f3) },
/* Tilgin */
- { USB_DEVICE(0x6933, 0x5001), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x6933, 0x5001) },
/* Philips */
- { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0471, 0x200a) },
/* Planex */
- { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x2019, 0xab01) },
+ { USB_DEVICE(0x2019, 0xab50) },
/* WideTell */
- { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x7167, 0x3840) },
/* Zcom */
- { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0cde, 0x001c) },
/* ZyXEL */
- { USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0586, 0x3415) },
{ 0, }
};
@@ -2508,10 +2510,16 @@
MODULE_FIRMWARE(FIRMWARE_RT2571);
MODULE_LICENSE("GPL");
+static int rt73usb_probe(struct usb_interface *usb_intf,
+ const struct usb_device_id *id)
+{
+ return rt2x00usb_probe(usb_intf, &rt73usb_ops);
+}
+
static struct usb_driver rt73usb_driver = {
.name = KBUILD_MODNAME,
.id_table = rt73usb_device_table,
- .probe = rt2x00usb_probe,
+ .probe = rt73usb_probe,
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index ce49e0c..5aee8b2 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -10,6 +10,17 @@
If you choose to build it as a module, it will be called rtl8192ce
+config RTL8192SE
+ tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
+ depends on MAC80211 && EXPERIMENTAL
+ select FW_LOADER
+ select RTLWIFI
+ ---help---
+ This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8192se
+
config RTL8192CU
tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
depends on MAC80211 && USB && EXPERIMENTAL
@@ -24,10 +35,10 @@
config RTLWIFI
tristate
- depends on RTL8192CE || RTL8192CU
+ depends on RTL8192CE || RTL8192CU || RTL8192SE
default m
config RTL8192C_COMMON
tristate
- depends on RTL8192CE || RTL8192CU
+ depends on RTL8192CE || RTL8192CU || RTL8192SE
default m
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index ec9393f..7acce83 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -22,5 +22,6 @@
obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c/
obj-$(CONFIG_RTL8192CE) += rtl8192ce/
obj-$(CONFIG_RTL8192CU) += rtl8192cu/
+obj-$(CONFIG_RTL8192SE) += rtl8192se/
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 0d7d93e..ccb6da3 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -50,8 +50,9 @@
*3) functions called by core.c
*4) wq & timer callback functions
*5) frame process functions
- *6) sysfs functions
- *7) ...
+ *6) IOT functions
+ *7) sysfs functions
+ *8) ...
*/
/*********************************************************
@@ -59,7 +60,7 @@
* mac80211 init functions
*
*********************************************************/
-static struct ieee80211_channel rtl_channeltable[] = {
+static struct ieee80211_channel rtl_channeltable_2g[] = {
{.center_freq = 2412, .hw_value = 1,},
{.center_freq = 2417, .hw_value = 2,},
{.center_freq = 2422, .hw_value = 3,},
@@ -76,7 +77,34 @@
{.center_freq = 2484, .hw_value = 14,},
};
-static struct ieee80211_rate rtl_ratetable[] = {
+static struct ieee80211_channel rtl_channeltable_5g[] = {
+ {.center_freq = 5180, .hw_value = 36,},
+ {.center_freq = 5200, .hw_value = 40,},
+ {.center_freq = 5220, .hw_value = 44,},
+ {.center_freq = 5240, .hw_value = 48,},
+ {.center_freq = 5260, .hw_value = 52,},
+ {.center_freq = 5280, .hw_value = 56,},
+ {.center_freq = 5300, .hw_value = 60,},
+ {.center_freq = 5320, .hw_value = 64,},
+ {.center_freq = 5500, .hw_value = 100,},
+ {.center_freq = 5520, .hw_value = 104,},
+ {.center_freq = 5540, .hw_value = 108,},
+ {.center_freq = 5560, .hw_value = 112,},
+ {.center_freq = 5580, .hw_value = 116,},
+ {.center_freq = 5600, .hw_value = 120,},
+ {.center_freq = 5620, .hw_value = 124,},
+ {.center_freq = 5640, .hw_value = 128,},
+ {.center_freq = 5660, .hw_value = 132,},
+ {.center_freq = 5680, .hw_value = 136,},
+ {.center_freq = 5700, .hw_value = 140,},
+ {.center_freq = 5745, .hw_value = 149,},
+ {.center_freq = 5765, .hw_value = 153,},
+ {.center_freq = 5785, .hw_value = 157,},
+ {.center_freq = 5805, .hw_value = 161,},
+ {.center_freq = 5825, .hw_value = 165,},
+};
+
+static struct ieee80211_rate rtl_ratetable_2g[] = {
{.bitrate = 10, .hw_value = 0x00,},
{.bitrate = 20, .hw_value = 0x01,},
{.bitrate = 55, .hw_value = 0x02,},
@@ -91,18 +119,57 @@
{.bitrate = 540, .hw_value = 0x0b,},
};
+static struct ieee80211_rate rtl_ratetable_5g[] = {
+ {.bitrate = 60, .hw_value = 0x04,},
+ {.bitrate = 90, .hw_value = 0x05,},
+ {.bitrate = 120, .hw_value = 0x06,},
+ {.bitrate = 180, .hw_value = 0x07,},
+ {.bitrate = 240, .hw_value = 0x08,},
+ {.bitrate = 360, .hw_value = 0x09,},
+ {.bitrate = 480, .hw_value = 0x0a,},
+ {.bitrate = 540, .hw_value = 0x0b,},
+};
+
static const struct ieee80211_supported_band rtl_band_2ghz = {
.band = IEEE80211_BAND_2GHZ,
- .channels = rtl_channeltable,
- .n_channels = ARRAY_SIZE(rtl_channeltable),
+ .channels = rtl_channeltable_2g,
+ .n_channels = ARRAY_SIZE(rtl_channeltable_2g),
- .bitrates = rtl_ratetable,
- .n_bitrates = ARRAY_SIZE(rtl_ratetable),
+ .bitrates = rtl_ratetable_2g,
+ .n_bitrates = ARRAY_SIZE(rtl_ratetable_2g),
.ht_cap = {0},
};
+static struct ieee80211_supported_band rtl_band_5ghz = {
+ .band = IEEE80211_BAND_5GHZ,
+
+ .channels = rtl_channeltable_5g,
+ .n_channels = ARRAY_SIZE(rtl_channeltable_5g),
+
+ .bitrates = rtl_ratetable_5g,
+ .n_bitrates = ARRAY_SIZE(rtl_ratetable_5g),
+
+ .ht_cap = {0},
+};
+
+static const u8 tid_to_ac[] = {
+ 2, /* IEEE80211_AC_BE */
+ 3, /* IEEE80211_AC_BK */
+ 3, /* IEEE80211_AC_BK */
+ 2, /* IEEE80211_AC_BE */
+ 1, /* IEEE80211_AC_VI */
+ 1, /* IEEE80211_AC_VI */
+ 0, /* IEEE80211_AC_VO */
+ 0, /* IEEE80211_AC_VO */
+};
+
+u8 rtl_tid_to_ac(struct ieee80211_hw *hw, u8 tid)
+{
+ return tid_to_ac[tid];
+}
+
static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
struct ieee80211_sta_ht_cap *ht_cap)
{
@@ -115,6 +182,9 @@
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_DSSSCCK40 | IEEE80211_HT_CAP_MAX_AMSDU;
+ if (rtlpriv->rtlhal.disable_amsdu_8k)
+ ht_cap->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU;
+
/*
*Maximum length of AMPDU that the STA can receive.
*Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
@@ -159,37 +229,99 @@
static void _rtl_init_mac80211(struct ieee80211_hw *hw)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct ieee80211_supported_band *sband;
- /* <1> use mac->bands as mem for hw->wiphy->bands */
- sband = &(rtlmac->bands[IEEE80211_BAND_2GHZ]);
- /*
- * <2> set hw->wiphy->bands[IEEE80211_BAND_2GHZ]
- * to default value(1T1R)
- */
- memcpy(&(rtlmac->bands[IEEE80211_BAND_2GHZ]), &rtl_band_2ghz,
- sizeof(struct ieee80211_supported_band));
+ if (rtlhal->macphymode == SINGLEMAC_SINGLEPHY && rtlhal->bandset ==
+ BAND_ON_BOTH) {
+ /* 1: 2.4 G bands */
+ /* <1> use mac->bands as mem for hw->wiphy->bands */
+ sband = &(rtlmac->bands[IEEE80211_BAND_2GHZ]);
- /* <3> init ht cap base on ant_num */
- _rtl_init_hw_ht_capab(hw, &sband->ht_cap);
+ /* <2> set hw->wiphy->bands[IEEE80211_BAND_2GHZ]
+ * to default value(1T1R) */
+ memcpy(&(rtlmac->bands[IEEE80211_BAND_2GHZ]), &rtl_band_2ghz,
+ sizeof(struct ieee80211_supported_band));
- /* <4> set mac->sband to wiphy->sband */
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ /* <3> init ht cap base on ant_num */
+ _rtl_init_hw_ht_capab(hw, &sband->ht_cap);
+ /* <4> set mac->sband to wiphy->sband */
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+
+ /* 2: 5 G bands */
+ /* <1> use mac->bands as mem for hw->wiphy->bands */
+ sband = &(rtlmac->bands[IEEE80211_BAND_5GHZ]);
+
+ /* <2> set hw->wiphy->bands[IEEE80211_BAND_5GHZ]
+ * to default value(1T1R) */
+ memcpy(&(rtlmac->bands[IEEE80211_BAND_5GHZ]), &rtl_band_5ghz,
+ sizeof(struct ieee80211_supported_band));
+
+ /* <3> init ht cap base on ant_num */
+ _rtl_init_hw_ht_capab(hw, &sband->ht_cap);
+
+ /* <4> set mac->sband to wiphy->sband */
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
+ } else {
+ if (rtlhal->current_bandtype == BAND_ON_2_4G) {
+ /* <1> use mac->bands as mem for hw->wiphy->bands */
+ sband = &(rtlmac->bands[IEEE80211_BAND_2GHZ]);
+
+ /* <2> set hw->wiphy->bands[IEEE80211_BAND_2GHZ]
+ * to default value(1T1R) */
+ memcpy(&(rtlmac->bands[IEEE80211_BAND_2GHZ]),
+ &rtl_band_2ghz,
+ sizeof(struct ieee80211_supported_band));
+
+ /* <3> init ht cap base on ant_num */
+ _rtl_init_hw_ht_capab(hw, &sband->ht_cap);
+
+ /* <4> set mac->sband to wiphy->sband */
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ } else if (rtlhal->current_bandtype == BAND_ON_5G) {
+ /* <1> use mac->bands as mem for hw->wiphy->bands */
+ sband = &(rtlmac->bands[IEEE80211_BAND_5GHZ]);
+
+ /* <2> set hw->wiphy->bands[IEEE80211_BAND_5GHZ]
+ * to default value(1T1R) */
+ memcpy(&(rtlmac->bands[IEEE80211_BAND_5GHZ]),
+ &rtl_band_5ghz,
+ sizeof(struct ieee80211_supported_band));
+
+ /* <3> init ht cap base on ant_num */
+ _rtl_init_hw_ht_capab(hw, &sband->ht_cap);
+
+ /* <4> set mac->sband to wiphy->sband */
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("Err BAND %d\n",
+ rtlhal->current_bandtype));
+ }
+ }
/* <5> set hw caps */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_AMPDU_AGGREGATION | /*PS*/
- /*IEEE80211_HW_SUPPORTS_PS | */
- /*IEEE80211_HW_PS_NULLFUNC_STACK | */
- /*IEEE80211_HW_SUPPORTS_DYNAMIC_PS | */
+ IEEE80211_HW_BEACON_FILTER |
+ IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_REPORTS_TX_ACK_STATUS | 0;
+ /* swlps or hwlps has been set in diff chip in init_sw_vars */
+ if (rtlpriv->psc.swctrl_lps)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_PS_NULLFUNC_STACK |
+ /* IEEE80211_HW_SUPPORTS_DYNAMIC_PS | */
+ 0;
+
hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
hw->wiphy->rts_threshold = 2347;
@@ -199,9 +331,10 @@
/* TODO: Correct this value for our hw */
/* TODO: define these hard code value */
hw->channel_change_time = 100;
- hw->max_listen_interval = 5;
+ hw->max_listen_interval = 10;
hw->max_rate_tries = 4;
/* hw->max_rates = 1; */
+ hw->sta_data_size = sizeof(struct rtl_sta_info);
/* <6> mac address */
if (is_valid_ether_addr(rtlefuse->dev_addr)) {
@@ -230,6 +363,10 @@
(void *)rtl_watchdog_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
(void *)rtl_ips_nic_off_wq_callback);
+ INIT_DELAYED_WORK(&rtlpriv->works.ps_work,
+ (void *)rtl_swlps_wq_callback);
+ INIT_DELAYED_WORK(&rtlpriv->works.ps_rfon_wq,
+ (void *)rtl_swlps_rfon_wq_callback);
}
@@ -241,6 +378,8 @@
cancel_delayed_work(&rtlpriv->works.watchdog_wq);
cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq);
+ cancel_delayed_work(&rtlpriv->works.ps_work);
+ cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
}
void rtl_init_rfkill(struct ieee80211_hw *hw)
@@ -251,14 +390,16 @@
bool blocked;
u8 valid = 0;
+ /*set init state to on */
+ rtlpriv->rfkill.rfkill_state = 1;
+ wiphy_rfkill_set_hw_state(hw->wiphy, 0);
+
radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
- /*set init state to that of switch */
- rtlpriv->rfkill.rfkill_state = radio_state;
- printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
- rtlpriv->rfkill.rfkill_state ? "on" : "off");
-
if (valid) {
+ printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
+ rtlpriv->rfkill.rfkill_state ? "on" : "off");
+
rtlpriv->rfkill.rfkill_state = radio_state;
blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;
@@ -308,6 +449,8 @@
spin_lock_init(&rtlpriv->locks.rf_ps_lock);
spin_lock_init(&rtlpriv->locks.rf_lock);
spin_lock_init(&rtlpriv->locks.lps_lock);
+ spin_lock_init(&rtlpriv->locks.waitq_lock);
+ spin_lock_init(&rtlpriv->locks.cck_and_rw_pagea_lock);
rtlmac->link_state = MAC80211_NOLINK;
@@ -327,12 +470,6 @@
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
- rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_MGT_FILTER,
- (u8 *) (&mac->rx_mgt_filter));
- rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_CTRL_FILTER,
- (u8 *) (&mac->rx_ctrl_filter));
- rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_DATA_FILTER,
- (u8 *) (&mac->rx_data_filter));
}
/*********************************************************
@@ -359,28 +496,40 @@
}
static void _rtl_query_shortgi(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
struct rtl_tcb_desc *tcb_desc,
struct ieee80211_tx_info *info)
{
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
u8 rate_flag = info->control.rates[0].flags;
-
+ u8 sgi_40 = 0, sgi_20 = 0, bw_40 = 0;
tcb_desc->use_shortgi = false;
- if (!mac->ht_enable)
+ if (sta == NULL)
return;
- if (!mac->sgi_40 && !mac->sgi_20)
+ sgi_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40;
+ sgi_20 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20;
+
+ if (!(sta->ht_cap.ht_supported))
return;
- if ((mac->bw_40 == true) && mac->sgi_40)
+ if (!sgi_40 && !sgi_20)
+ return;
+
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ bw_40 = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ bw_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+ if ((bw_40 == true) && sgi_40)
tcb_desc->use_shortgi = true;
- else if ((mac->bw_40 == false) && mac->sgi_20)
+ else if ((bw_40 == false) && sgi_20)
tcb_desc->use_shortgi = true;
if (!(rate_flag & IEEE80211_TX_RC_SHORT_GI))
tcb_desc->use_shortgi = false;
-
}
static void _rtl_query_protection_mode(struct ieee80211_hw *hw,
@@ -408,19 +557,25 @@
tcb_desc->rts_enable = true;
tcb_desc->rts_rate = rtlpriv->cfg->maps[RTL_RC_OFDM_RATE24M];
}
-
}
static void _rtl_txrate_selectmode(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
struct rtl_tcb_desc *tcb_desc)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u8 ratr_index = 7;
+ if (sta) {
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ ratr_index = sta_entry->ratr_index;
+ }
if (!tcb_desc->disable_ratefallback || !tcb_desc->use_driver_rate) {
- if (mac->opmode == NL80211_IFTYPE_STATION)
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
tcb_desc->ratr_index = 0;
- else if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ } else if (mac->opmode == NL80211_IFTYPE_ADHOC) {
if (tcb_desc->multicast || tcb_desc->broadcast) {
tcb_desc->hw_rate =
rtlpriv->cfg->maps[RTL_RC_CCK_RATE2M];
@@ -428,36 +583,61 @@
} else {
/* TODO */
}
+ tcb_desc->ratr_index = ratr_index;
+ } else if (mac->opmode == NL80211_IFTYPE_AP) {
+ tcb_desc->ratr_index = ratr_index;
}
}
if (rtlpriv->dm.useramask) {
/* TODO we will differentiate adhoc and station futrue */
- tcb_desc->mac_id = 0;
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
+ tcb_desc->mac_id = 0;
- if ((mac->mode == WIRELESS_MODE_N_24G) ||
- (mac->mode == WIRELESS_MODE_N_5G)) {
- tcb_desc->ratr_index = RATR_INX_WIRELESS_NGB;
- } else if (mac->mode & WIRELESS_MODE_G) {
- tcb_desc->ratr_index = RATR_INX_WIRELESS_GB;
- } else if (mac->mode & WIRELESS_MODE_B) {
- tcb_desc->ratr_index = RATR_INX_WIRELESS_B;
+ if (mac->mode == WIRELESS_MODE_N_24G)
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_NGB;
+ else if (mac->mode == WIRELESS_MODE_N_5G)
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_NG;
+ else if (mac->mode & WIRELESS_MODE_G)
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_GB;
+ else if (mac->mode & WIRELESS_MODE_B)
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_B;
+ else if (mac->mode & WIRELESS_MODE_A)
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_G;
+ } else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (NULL != sta) {
+ if (sta->aid > 0)
+ tcb_desc->mac_id = sta->aid + 1;
+ else
+ tcb_desc->mac_id = 1;
+ } else {
+ tcb_desc->mac_id = 0;
+ }
}
}
}
static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
struct rtl_tcb_desc *tcb_desc)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
tcb_desc->packet_bw = false;
-
- if (!mac->bw_40 || !mac->ht_enable)
+ if (!sta)
return;
-
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (!(sta->ht_cap.ht_supported) ||
+ !(sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+ return;
+ } else if (mac->opmode == NL80211_IFTYPE_STATION) {
+ if (!mac->bw_40 || !(sta->ht_cap.ht_supported))
+ return;
+ }
if (tcb_desc->multicast || tcb_desc->broadcast)
return;
@@ -484,22 +664,21 @@
void rtl_get_tcb_desc(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
+ struct ieee80211_sta *sta,
struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+ struct ieee80211_hdr *hdr = rtl_get_hdr(skb);
struct ieee80211_rate *txrate;
__le16 fc = hdr->frame_control;
- memset(tcb_desc, 0, sizeof(struct rtl_tcb_desc));
+ txrate = ieee80211_get_tx_rate(hw, info);
+ tcb_desc->hw_rate = txrate->hw_value;
if (ieee80211_is_data(fc)) {
- txrate = ieee80211_get_tx_rate(hw, info);
- tcb_desc->hw_rate = txrate->hw_value;
-
/*
- *we set data rate RTL_RC_CCK_RATE1M
+ *we set data rate INX 0
*in rtl_rc.c if skb is special data or
*mgt which need low data rate.
*/
@@ -508,12 +687,11 @@
*So tcb_desc->hw_rate is just used for
*special data and mgt frames
*/
- if (tcb_desc->hw_rate < rtlpriv->cfg->maps[RTL_RC_CCK_RATE11M]) {
+ if (info->control.rates[0].idx == 0 &&
+ ieee80211_is_nullfunc(fc)) {
tcb_desc->use_driver_rate = true;
- tcb_desc->ratr_index = 7;
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_MC;
- tcb_desc->hw_rate =
- rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
tcb_desc->disable_ratefallback = 1;
} else {
/*
@@ -523,7 +701,7 @@
*and N rate will all be controlled by FW
*when tcb_desc->use_driver_rate = false
*/
- if (rtlmac->ht_enable) {
+ if (sta && (sta->ht_cap.ht_supported)) {
tcb_desc->hw_rate = _rtl_get_highest_n_rate(hw);
} else {
if (rtlmac->mode == WIRELESS_MODE_B) {
@@ -541,43 +719,25 @@
else if (is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
tcb_desc->broadcast = 1;
- _rtl_txrate_selectmode(hw, tcb_desc);
- _rtl_query_bandwidth_mode(hw, tcb_desc);
+ _rtl_txrate_selectmode(hw, sta, tcb_desc);
+ _rtl_query_bandwidth_mode(hw, sta, tcb_desc);
_rtl_qurey_shortpreamble_mode(hw, tcb_desc, info);
- _rtl_query_shortgi(hw, tcb_desc, info);
+ _rtl_query_shortgi(hw, sta, tcb_desc, info);
_rtl_query_protection_mode(hw, tcb_desc, info);
} else {
tcb_desc->use_driver_rate = true;
- tcb_desc->ratr_index = 7;
+ tcb_desc->ratr_index = RATR_INX_WIRELESS_MC;
tcb_desc->disable_ratefallback = 1;
tcb_desc->mac_id = 0;
-
- tcb_desc->hw_rate = rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+ tcb_desc->packet_bw = false;
}
}
EXPORT_SYMBOL(rtl_get_tcb_desc);
-bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
- __le16 fc = hdr->frame_control;
-
- if (ieee80211_is_auth(fc)) {
- RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
- rtl_ips_nic_on(hw);
-
- mac->link_state = MAC80211_LINKING;
- }
-
- return true;
-}
-
bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
{
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+ struct ieee80211_hdr *hdr = rtl_get_hdr(skb);
struct rtl_priv *rtlpriv = rtl_priv(hw);
__le16 fc = hdr->frame_control;
u8 *act = (u8 *) (((u8 *) skb->data + MAC80211_3ADDR_LEN));
@@ -622,22 +782,20 @@
u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
- __le16 fc = hdr->frame_control;
+ __le16 fc = rtl_get_fc(skb);
u16 ether_type;
u8 mac_hdr_len = ieee80211_get_hdrlen_from_skb(skb);
const struct iphdr *ip;
if (!ieee80211_is_data(fc))
- goto end;
+ return false;
- if (ieee80211_is_nullfunc(fc))
- return true;
ip = (struct iphdr *)((u8 *) skb->data + mac_hdr_len +
SNAP_SIZE + PROTOC_TYPE_SIZE);
ether_type = *(u16 *) ((u8 *) skb->data + mac_hdr_len + SNAP_SIZE);
+ /* ether_type = ntohs(ether_type); */
if (ETH_P_IP == ether_type) {
if (IPPROTO_UDP == ip->protocol) {
@@ -686,7 +844,6 @@
return true;
}
-end:
return false;
}
@@ -695,61 +852,92 @@
* functions called by core.c
*
*********************************************************/
-int rtl_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra, u16 tid, u16 *ssn)
+int rtl_tx_agg_start(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_tid_data *tid_data;
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
- RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG,
- ("on ra = %pM tid = %d\n", ra, tid));
+ if (sta == NULL)
+ return -EINVAL;
if (unlikely(tid >= MAX_TID_COUNT))
return -EINVAL;
- if (mac->tids[tid].agg.agg_state != RTL_AGG_OFF) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- ("Start AGG when state is not RTL_AGG_OFF !\n"));
+ sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+ if (!sta_entry)
return -ENXIO;
- }
-
- tid_data = &mac->tids[tid];
- *ssn = SEQ_TO_SN(tid_data->seq_number);
+ tid_data = &sta_entry->tids[tid];
RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG,
- ("HW queue is empty tid:%d\n", tid));
- tid_data->agg.agg_state = RTL_AGG_ON;
+ ("on ra = %pM tid = %d seq:%d\n", sta->addr, tid,
+ tid_data->seq_number));
- ieee80211_start_tx_ba_cb_irqsafe(mac->vif, ra, tid);
+ *ssn = tid_data->seq_number;
+ tid_data->agg.agg_state = RTL_AGG_START;
+
+ ieee80211_start_tx_ba_cb_irqsafe(mac->vif, sta->addr, tid);
return 0;
}
-int rtl_tx_agg_stop(struct ieee80211_hw *hw, const u8 * ra, u16 tid)
+int rtl_tx_agg_stop(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u16 tid)
{
- int ssn = -1;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_tid_data *tid_data;
+ struct rtl_sta_info *sta_entry = NULL;
- if (!ra) {
+ if (sta == NULL)
+ return -EINVAL;
+
+ if (!sta->addr) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("ra = NULL\n"));
return -EINVAL;
}
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG,
+ ("on ra = %pM tid = %d\n", sta->addr, tid));
+
if (unlikely(tid >= MAX_TID_COUNT))
return -EINVAL;
- if (mac->tids[tid].agg.agg_state != RTL_AGG_ON)
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- ("Stopping AGG while state not ON or starting\n"));
+ sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+ tid_data = &sta_entry->tids[tid];
+ sta_entry->tids[tid].agg.agg_state = RTL_AGG_STOP;
- tid_data = &mac->tids[tid];
- ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
+ ieee80211_stop_tx_ba_cb_irqsafe(mac->vif, sta->addr, tid);
- mac->tids[tid].agg.agg_state = RTL_AGG_OFF;
+ return 0;
+}
- ieee80211_stop_tx_ba_cb_irqsafe(mac->vif, ra, tid);
+int rtl_tx_agg_oper(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u16 tid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_tid_data *tid_data;
+ struct rtl_sta_info *sta_entry = NULL;
+
+ if (sta == NULL)
+ return -EINVAL;
+
+ if (!sta->addr) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("ra = NULL\n"));
+ return -EINVAL;
+ }
+
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG,
+ ("on ra = %pM tid = %d\n", sta->addr, tid));
+
+ if (unlikely(tid >= MAX_TID_COUNT))
+ return -EINVAL;
+
+ sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+ tid_data = &sta_entry->tids[tid];
+ sta_entry->tids[tid].agg.agg_state = RTL_AGG_OPERATIONAL;
return 0;
}
@@ -768,18 +956,16 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-
bool busytraffic = false;
bool higher_busytraffic = false;
bool higher_busyrxtraffic = false;
- bool higher_busytxtraffic = false;
-
- u8 idx = 0;
+ u8 idx, tid;
u32 rx_cnt_inp4eriod = 0;
u32 tx_cnt_inp4eriod = 0;
u32 aver_rx_cnt_inperiod = 0;
u32 aver_tx_cnt_inperiod = 0;
-
+ u32 aver_tidtx_inperiod[MAX_TID_COUNT] = {0};
+ u32 tidtx_inp4eriod[MAX_TID_COUNT] = {0};
bool enter_ps = false;
if (is_hal_stop(rtlhal))
@@ -793,9 +979,6 @@
mac->cnt_after_linked = 0;
}
- /* <2> DM */
- rtlpriv->cfg->ops->dm_watchdog(hw);
-
/*
*<3> to check if traffic busy, if
* busytraffic we don't change channel
@@ -834,8 +1017,27 @@
/* Extremely high Rx data. */
if (aver_rx_cnt_inperiod > 5000)
higher_busyrxtraffic = true;
+ }
+
+ /* check every tid's tx traffic */
+ for (tid = 0; tid <= 7; tid++) {
+ for (idx = 0; idx <= 2; idx++)
+ rtlpriv->link_info.tidtx_in4period[tid][idx] =
+ rtlpriv->link_info.tidtx_in4period[tid]
+ [idx + 1];
+ rtlpriv->link_info.tidtx_in4period[tid][3] =
+ rtlpriv->link_info.tidtx_inperiod[tid];
+
+ for (idx = 0; idx <= 3; idx++)
+ tidtx_inp4eriod[tid] +=
+ rtlpriv->link_info.tidtx_in4period[tid][idx];
+ aver_tidtx_inperiod[tid] = tidtx_inp4eriod[tid] / 4;
+ if (aver_tidtx_inperiod[tid] > 5000)
+ rtlpriv->link_info.higher_busytxtraffic[tid] =
+ true;
else
- higher_busytxtraffic = false;
+ rtlpriv->link_info.higher_busytxtraffic[tid] =
+ false;
}
if (((rtlpriv->link_info.num_rx_inperiod +
@@ -854,11 +1056,15 @@
rtlpriv->link_info.num_rx_inperiod = 0;
rtlpriv->link_info.num_tx_inperiod = 0;
+ for (tid = 0; tid <= 7; tid++)
+ rtlpriv->link_info.tidtx_inperiod[tid] = 0;
rtlpriv->link_info.busytraffic = busytraffic;
rtlpriv->link_info.higher_busytraffic = higher_busytraffic;
rtlpriv->link_info.higher_busyrxtraffic = higher_busyrxtraffic;
+ /* <3> DM */
+ rtlpriv->cfg->ops->dm_watchdog(hw);
}
void rtl_watch_dog_timer_callback(unsigned long data)
@@ -875,6 +1081,268 @@
/*********************************************************
*
+ * frame process functions
+ *
+ *********************************************************/
+u8 *rtl_find_ie(u8 *data, unsigned int len, u8 ie)
+{
+ struct ieee80211_mgmt *mgmt = (void *)data;
+ u8 *pos, *end;
+
+ pos = (u8 *)mgmt->u.beacon.variable;
+ end = data + len;
+ while (pos < end) {
+ if (pos + 2 + pos[1] > end)
+ return NULL;
+
+ if (pos[0] == ie)
+ return pos;
+
+ pos += 2 + pos[1];
+ }
+ return NULL;
+}
+
+/* when we use 2 rx ants we send IEEE80211_SMPS_OFF */
+/* when we use 1 rx ant we send IEEE80211_SMPS_STATIC */
+static struct sk_buff *rtl_make_smps_action(struct ieee80211_hw *hw,
+ enum ieee80211_smps_mode smps, u8 *da, u8 *bssid)
+{
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct sk_buff *skb;
+ struct ieee80211_mgmt *action_frame;
+
+ /* 27 = header + category + action + smps mode */
+ skb = dev_alloc_skb(27 + hw->extra_tx_headroom);
+ if (!skb)
+ return NULL;
+
+ skb_reserve(skb, hw->extra_tx_headroom);
+ action_frame = (void *)skb_put(skb, 27);
+ memset(action_frame, 0, 27);
+ memcpy(action_frame->da, da, ETH_ALEN);
+ memcpy(action_frame->sa, rtlefuse->dev_addr, ETH_ALEN);
+ memcpy(action_frame->bssid, bssid, ETH_ALEN);
+ action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
+ action_frame->u.action.category = WLAN_CATEGORY_HT;
+ action_frame->u.action.u.ht_smps.action = WLAN_HT_ACTION_SMPS;
+ switch (smps) {
+ case IEEE80211_SMPS_AUTOMATIC:/* 0 */
+ case IEEE80211_SMPS_NUM_MODES:/* 4 */
+ WARN_ON(1);
+ case IEEE80211_SMPS_OFF:/* 1 */ /*MIMO_PS_NOLIMIT*/
+ action_frame->u.action.u.ht_smps.smps_control =
+ WLAN_HT_SMPS_CONTROL_DISABLED;/* 0 */
+ break;
+ case IEEE80211_SMPS_STATIC:/* 2 */ /*MIMO_PS_STATIC*/
+ action_frame->u.action.u.ht_smps.smps_control =
+ WLAN_HT_SMPS_CONTROL_STATIC;/* 1 */
+ break;
+ case IEEE80211_SMPS_DYNAMIC:/* 3 */ /*MIMO_PS_DYNAMIC*/
+ action_frame->u.action.u.ht_smps.smps_control =
+ WLAN_HT_SMPS_CONTROL_DYNAMIC;/* 3 */
+ break;
+ }
+
+ return skb;
+}
+
+int rtl_send_smps_action(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 *da, u8 *bssid,
+ enum ieee80211_smps_mode smps)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct sk_buff *skb = rtl_make_smps_action(hw, smps, da, bssid);
+ struct rtl_tcb_desc tcb_desc;
+ memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
+
+ if (rtlpriv->mac80211.act_scanning)
+ goto err_free;
+
+ if (!sta)
+ goto err_free;
+
+ if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
+ goto err_free;
+
+ if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
+ goto err_free;
+
+ /* this is a type = mgmt * stype = action frame */
+ if (skb) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct rtl_sta_info *sta_entry =
+ (struct rtl_sta_info *) sta->drv_priv;
+ sta_entry->mimo_ps = smps;
+ rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
+
+ info->control.rates[0].idx = 0;
+ info->control.sta = sta;
+ info->band = hw->conf.channel->band;
+ rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);
+ }
+err_free:
+ return 0;
+}
+
+/*********************************************************
+ *
+ * IOT functions
+ *
+ *********************************************************/
+static bool rtl_chk_vendor_ouisub(struct ieee80211_hw *hw,
+ struct octet_string vendor_ie)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ bool matched = false;
+ static u8 athcap_1[] = { 0x00, 0x03, 0x7F };
+ static u8 athcap_2[] = { 0x00, 0x13, 0x74 };
+ static u8 broadcap_1[] = { 0x00, 0x10, 0x18 };
+ static u8 broadcap_2[] = { 0x00, 0x0a, 0xf7 };
+ static u8 broadcap_3[] = { 0x00, 0x05, 0xb5 };
+ static u8 racap[] = { 0x00, 0x0c, 0x43 };
+ static u8 ciscocap[] = { 0x00, 0x40, 0x96 };
+ static u8 marvcap[] = { 0x00, 0x50, 0x43 };
+
+ if (memcmp(vendor_ie.octet, athcap_1, 3) == 0 ||
+ memcmp(vendor_ie.octet, athcap_2, 3) == 0) {
+ rtlpriv->mac80211.vendor = PEER_ATH;
+ matched = true;
+ } else if (memcmp(vendor_ie.octet, broadcap_1, 3) == 0 ||
+ memcmp(vendor_ie.octet, broadcap_2, 3) == 0 ||
+ memcmp(vendor_ie.octet, broadcap_3, 3) == 0) {
+ rtlpriv->mac80211.vendor = PEER_BROAD;
+ matched = true;
+ } else if (memcmp(vendor_ie.octet, racap, 3) == 0) {
+ rtlpriv->mac80211.vendor = PEER_RAL;
+ matched = true;
+ } else if (memcmp(vendor_ie.octet, ciscocap, 3) == 0) {
+ rtlpriv->mac80211.vendor = PEER_CISCO;
+ matched = true;
+ } else if (memcmp(vendor_ie.octet, marvcap, 3) == 0) {
+ rtlpriv->mac80211.vendor = PEER_MARV;
+ matched = true;
+ }
+
+ return matched;
+}
+
+static bool rtl_find_221_ie(struct ieee80211_hw *hw, u8 *data,
+ unsigned int len)
+{
+ struct ieee80211_mgmt *mgmt = (void *)data;
+ struct octet_string vendor_ie;
+ u8 *pos, *end;
+
+ pos = (u8 *)mgmt->u.beacon.variable;
+ end = data + len;
+ while (pos < end) {
+ if (pos[0] == 221) {
+ vendor_ie.length = pos[1];
+ vendor_ie.octet = &pos[2];
+ if (rtl_chk_vendor_ouisub(hw, vendor_ie))
+ return true;
+ }
+
+ if (pos + 2 + pos[1] > end)
+ return false;
+
+ pos += 2 + pos[1];
+ }
+ return false;
+}
+
+void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct ieee80211_hdr *hdr = (void *)data;
+ u32 vendor = PEER_UNKNOWN;
+
+ static u8 ap3_1[3] = { 0x00, 0x14, 0xbf };
+ static u8 ap3_2[3] = { 0x00, 0x1a, 0x70 };
+ static u8 ap3_3[3] = { 0x00, 0x1d, 0x7e };
+ static u8 ap4_1[3] = { 0x00, 0x90, 0xcc };
+ static u8 ap4_2[3] = { 0x00, 0x0e, 0x2e };
+ static u8 ap4_3[3] = { 0x00, 0x18, 0x02 };
+ static u8 ap4_4[3] = { 0x00, 0x17, 0x3f };
+ static u8 ap4_5[3] = { 0x00, 0x1c, 0xdf };
+ static u8 ap5_1[3] = { 0x00, 0x1c, 0xf0 };
+ static u8 ap5_2[3] = { 0x00, 0x21, 0x91 };
+ static u8 ap5_3[3] = { 0x00, 0x24, 0x01 };
+ static u8 ap5_4[3] = { 0x00, 0x15, 0xe9 };
+ static u8 ap5_5[3] = { 0x00, 0x17, 0x9A };
+ static u8 ap5_6[3] = { 0x00, 0x18, 0xE7 };
+ static u8 ap6_1[3] = { 0x00, 0x17, 0x94 };
+ static u8 ap7_1[3] = { 0x00, 0x14, 0xa4 };
+
+ if (mac->opmode != NL80211_IFTYPE_STATION)
+ return;
+
+ if (mac->link_state == MAC80211_NOLINK) {
+ mac->vendor = PEER_UNKNOWN;
+ return;
+ }
+
+ if (mac->cnt_after_linked > 2)
+ return;
+
+ /* check if this really is a beacon */
+ if (!ieee80211_is_beacon(hdr->frame_control))
+ return;
+
+ /* min. beacon length + FCS_LEN */
+ if (len <= 40 + FCS_LEN)
+ return;
+
+ /* and only beacons from the associated BSSID, please */
+ if (compare_ether_addr(hdr->addr3, rtlpriv->mac80211.bssid))
+ return;
+
+ if (rtl_find_221_ie(hw, data, len))
+ vendor = mac->vendor;
+
+ if ((memcmp(mac->bssid, ap5_1, 3) == 0) ||
+ (memcmp(mac->bssid, ap5_2, 3) == 0) ||
+ (memcmp(mac->bssid, ap5_3, 3) == 0) ||
+ (memcmp(mac->bssid, ap5_4, 3) == 0) ||
+ (memcmp(mac->bssid, ap5_5, 3) == 0) ||
+ (memcmp(mac->bssid, ap5_6, 3) == 0) ||
+ vendor == PEER_ATH) {
+ vendor = PEER_ATH;
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("=>ath find\n"));
+ } else if ((memcmp(mac->bssid, ap4_4, 3) == 0) ||
+ (memcmp(mac->bssid, ap4_5, 3) == 0) ||
+ (memcmp(mac->bssid, ap4_1, 3) == 0) ||
+ (memcmp(mac->bssid, ap4_2, 3) == 0) ||
+ (memcmp(mac->bssid, ap4_3, 3) == 0) ||
+ vendor == PEER_RAL) {
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("=>ral findn\n"));
+ vendor = PEER_RAL;
+ } else if (memcmp(mac->bssid, ap6_1, 3) == 0 ||
+ vendor == PEER_CISCO) {
+ vendor = PEER_CISCO;
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("=>cisco find\n"));
+ } else if ((memcmp(mac->bssid, ap3_1, 3) == 0) ||
+ (memcmp(mac->bssid, ap3_2, 3) == 0) ||
+ (memcmp(mac->bssid, ap3_3, 3) == 0) ||
+ vendor == PEER_BROAD) {
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("=>broad find\n"));
+ vendor = PEER_BROAD;
+ } else if (memcmp(mac->bssid, ap7_1, 3) == 0 ||
+ vendor == PEER_MARV) {
+ vendor = PEER_MARV;
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("=>marv find\n"));
+ }
+
+ mac->vendor = vendor;
+}
+
+/*********************************************************
+ *
* sysfs functions
*
*********************************************************/
@@ -940,12 +1408,13 @@
if (rtl_rate_control_register())
printk(KERN_ERR "rtlwifi: Unable to register rtl_rc,"
"use default RC !!\n");
+
return 0;
}
static void __exit rtl_core_module_exit(void)
{
- /*RC*/
+ /*RC*/
rtl_rate_control_unregister();
}
diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h
index 0430453..a91f3ee 100644
--- a/drivers/net/wireless/rtlwifi/base.h
+++ b/drivers/net/wireless/rtlwifi/base.h
@@ -24,13 +24,26 @@
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
+ *
*****************************************************************************/
#ifndef __RTL_BASE_H__
#define __RTL_BASE_H__
+enum ap_peer {
+ PEER_UNKNOWN = 0,
+ PEER_RTL = 1,
+ PEER_RTL_92SE = 2,
+ PEER_BROAD = 3,
+ PEER_RAL = 4,
+ PEER_ATH = 5,
+ PEER_CISCO = 6,
+ PEER_MARV = 7,
+ PEER_AIRGO = 9,
+ PEER_MAX = 10,
+} ;
+
#define RTL_DUMMY_OFFSET 0
-#define RTL_RX_DESC_SIZE 24
#define RTL_DUMMY_UNIT 8
#define RTL_TX_DUMMY_SIZE (RTL_DUMMY_OFFSET * RTL_DUMMY_UNIT)
#define RTL_TX_DESC_SIZE 32
@@ -53,6 +66,14 @@
#define FRAME_OFFSET_SEQUENCE 22
#define FRAME_OFFSET_ADDRESS4 24
+#define SET_80211_HDR_FRAME_CONTROL(_hdr, _val) \
+ WRITEEF2BYTE(_hdr, _val)
+#define SET_80211_HDR_TYPE_AND_SUBTYPE(_hdr, _val) \
+ WRITEEF1BYTE(_hdr, _val)
+#define SET_80211_HDR_PWR_MGNT(_hdr, _val) \
+ SET_BITS_TO_LE_2BYTE(_hdr, 12, 1, _val)
+#define SET_80211_HDR_TO_DS(_hdr, _val) \
+ SET_BITS_TO_LE_2BYTE(_hdr, 8, 1, _val)
#define SET_80211_PS_POLL_AID(_hdr, _val) \
(*(u16 *)((u8 *)(_hdr) + 2) = le16_to_cpu(_val))
@@ -64,11 +85,27 @@
#define SET_80211_HDR_DURATION(_hdr, _val) \
(*(u16 *)((u8 *)(_hdr) + FRAME_OFFSET_DURATION) = le16_to_cpu(_val))
#define SET_80211_HDR_ADDRESS1(_hdr, _val) \
- memcpy((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS1, (u8*)(_val), ETH_ALEN)
+ CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS1, (u8 *)(_val))
#define SET_80211_HDR_ADDRESS2(_hdr, _val) \
- memcpy((u8 *)(_hdr) + FRAME_OFFSET_ADDRESS2, (u8 *)(_val), ETH_ALEN)
+ CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS2, (u8 *)(_val))
#define SET_80211_HDR_ADDRESS3(_hdr, _val) \
- memcpy((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS3, (u8 *)(_val), ETH_ALEN)
+ CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS3, (u8 *)(_val))
+#define SET_80211_HDR_FRAGMENT_SEQUENCE(_hdr, _val) \
+ WRITEEF2BYTE((u8 *)(_hdr)+FRAME_OFFSET_SEQUENCE, _val)
+
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_LOW(__phdr, __val) \
+ WRITEEF4BYTE(((u8 *)(__phdr)) + 24, __val)
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_HIGH(__phdr, __val) \
+ WRITEEF4BYTE(((u8 *)(__phdr)) + 28, __val)
+#define SET_BEACON_PROBE_RSP_BEACON_INTERVAL(__phdr, __val) \
+ WRITEEF2BYTE(((u8 *)(__phdr)) + 32, __val)
+#define GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr) \
+ READEF2BYTE(((u8 *)(__phdr)) + 34)
+#define SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+ WRITEEF2BYTE(((u8 *)(__phdr)) + 34, __val)
+#define MASK_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+ SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, \
+ (GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr) & (~(__val))))
int rtl_init_core(struct ieee80211_hw *hw);
void rtl_deinit_core(struct ieee80211_hw *hw);
@@ -80,18 +117,27 @@
void rtl_deinit_deferred_work(struct ieee80211_hw *hw);
bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
-bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
void rtl_watch_dog_timer_callback(unsigned long data);
-int rtl_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra,
+int rtl_tx_agg_start(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
u16 tid, u16 *ssn);
-int rtl_tx_agg_stop(struct ieee80211_hw *hw, const u8 *ra, u16 tid);
+int rtl_tx_agg_stop(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+ u16 tid);
+int rtl_tx_agg_oper(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+ u16 tid);
void rtl_watchdog_wq_callback(void *data);
void rtl_get_tcb_desc(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
+ struct ieee80211_sta *sta,
struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc);
+int rtl_send_smps_action(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 *da, u8 *bssid,
+ enum ieee80211_smps_mode smps);
+u8 *rtl_find_ie(u8 *data, unsigned int len, u8 ie);
+void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len);
+u8 rtl_tid_to_ac(struct ieee80211_hw *hw, u8 tid);
extern struct attribute_group rtl_attribute_group;
#endif
diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
index 52c9c136..7295af0 100644
--- a/drivers/net/wireless/rtlwifi/cam.c
+++ b/drivers/net/wireless/rtlwifi/cam.c
@@ -23,6 +23,8 @@
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
*****************************************************************************/
#include "wifi.h"
@@ -49,7 +51,7 @@
u32 target_content = 0;
u8 entry_i;
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
("key_cont_128:\n %x:%x:%x:%x:%x:%x\n",
key_cont_128[0], key_cont_128[1],
key_cont_128[2], key_cont_128[3],
@@ -68,15 +70,13 @@
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
target_command);
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("rtl_cam_program_entry(): "
- "WRITE %x: %x\n",
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("WRITE %x: %x\n",
rtlpriv->cfg->maps[WCAMI], target_content));
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
("The Key ID is %d\n", entry_no));
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("rtl_cam_program_entry(): "
- "WRITE %x: %x\n",
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("WRITE %x: %x\n",
rtlpriv->cfg->maps[RWCAM], target_command));
} else if (entry_i == 1) {
@@ -91,12 +91,10 @@
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
target_command);
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("rtl_cam_program_entry(): WRITE A4: %x\n",
- target_content));
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("rtl_cam_program_entry(): WRITE A0: %x\n",
- target_command));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("WRITE A4: %x\n", target_content));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("WRITE A0: %x\n", target_command));
} else {
@@ -113,16 +111,14 @@
target_command);
udelay(100);
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("rtl_cam_program_entry(): WRITE A4: %x\n",
- target_content));
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("rtl_cam_program_entry(): WRITE A0: %x\n",
- target_command));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("WRITE A4: %x\n", target_content));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("WRITE A0: %x\n", target_command));
}
}
- RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
("after set key, usconfig:%x\n", us_config));
}
@@ -289,3 +285,71 @@
}
EXPORT_SYMBOL(rtl_cam_empty_entry);
+
+u8 rtl_cam_get_free_entry(struct ieee80211_hw *hw, u8 *sta_addr)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 bitmap = (rtlpriv->sec.hwsec_cam_bitmap) >> 4;
+ u8 entry_idx = 0;
+ u8 i, *addr;
+
+ if (NULL == sta_addr) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
+ ("sta_addr is NULL.\n"));
+ return TOTAL_CAM_ENTRY;
+ }
+ /* Does STA already exist? */
+ for (i = 4; i < TOTAL_CAM_ENTRY; i++) {
+ addr = rtlpriv->sec.hwsec_cam_sta_addr[i];
+ if (memcmp(addr, sta_addr, ETH_ALEN) == 0)
+ return i;
+ }
+ /* Get a free CAM entry. */
+ for (entry_idx = 4; entry_idx < TOTAL_CAM_ENTRY; entry_idx++) {
+ if ((bitmap & BIT(0)) == 0) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
+ ("-----hwsec_cam_bitmap: 0x%x entry_idx=%d\n",
+ rtlpriv->sec.hwsec_cam_bitmap, entry_idx));
+ rtlpriv->sec.hwsec_cam_bitmap |= BIT(0) << entry_idx;
+ memcpy(rtlpriv->sec.hwsec_cam_sta_addr[entry_idx],
+ sta_addr, ETH_ALEN);
+ return entry_idx;
+ }
+ bitmap = bitmap >> 1;
+ }
+ return TOTAL_CAM_ENTRY;
+}
+EXPORT_SYMBOL(rtl_cam_get_free_entry);
+
+void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 bitmap;
+ u8 i, *addr;
+
+ if (NULL == sta_addr) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
+ ("sta_addr is NULL.\n"));
+ }
+
+ if ((sta_addr[0]|sta_addr[1]|sta_addr[2]|sta_addr[3]|\
+ sta_addr[4]|sta_addr[5]) == 0) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
+ ("sta_addr is 00:00:00:00:00:00.\n"));
+ return;
+ }
+ /* Does STA already exist? */
+ for (i = 4; i < TOTAL_CAM_ENTRY; i++) {
+ addr = rtlpriv->sec.hwsec_cam_sta_addr[i];
+ bitmap = (rtlpriv->sec.hwsec_cam_bitmap) >> i;
+ if (((bitmap & BIT(0)) == BIT(0)) &&
+ (memcmp(addr, sta_addr, ETH_ALEN) == 0)) {
+ /* Remove from HW Security CAM */
+ memset(rtlpriv->sec.hwsec_cam_sta_addr[i], 0, ETH_ALEN);
+ rtlpriv->sec.hwsec_cam_bitmap &= ~(BIT(0) << i);
+ printk(KERN_INFO "&&&&&&&&&del entry %d\n", i);
+ }
+ }
+ return;
+}
+EXPORT_SYMBOL(rtl_cam_del_entry);
diff --git a/drivers/net/wireless/rtlwifi/cam.h b/drivers/net/wireless/rtlwifi/cam.h
index dd82f05..c62da4e 100644
--- a/drivers/net/wireless/rtlwifi/cam.h
+++ b/drivers/net/wireless/rtlwifi/cam.h
@@ -23,12 +23,13 @@
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
*****************************************************************************/
#ifndef __RTL_CAM_H_
#define __RTL_CAM_H_
-#define TOTAL_CAM_ENTRY 32
#define CAM_CONTENT_COUNT 8
#define CFG_DEFAULT_KEY BIT(5)
@@ -49,5 +50,7 @@
void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index);
void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index);
void rtl_cam_reset_sec_info(struct ieee80211_hw *hw);
+u8 rtl_cam_get_free_entry(struct ieee80211_hw *hw, u8 *sta_addr);
+void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr);
#endif
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index e4f4aee..fc89cd8 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -24,6 +24,7 @@
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
+ *
*****************************************************************************/
#include "wifi.h"
@@ -35,7 +36,7 @@
/*mutex for start & stop is must here. */
static int rtl_op_start(struct ieee80211_hw *hw)
{
- int err = 0;
+ int err;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
@@ -45,10 +46,8 @@
return 0;
mutex_lock(&rtlpriv->locks.conf_mutex);
err = rtlpriv->intf_ops->adapter_start(hw);
- if (err)
- goto out;
- rtl_watch_dog_timer_callback((unsigned long)hw);
-out:
+ if (!err)
+ rtl_watch_dog_timer_callback((unsigned long)hw);
mutex_unlock(&rtlpriv->locks.conf_mutex);
return err;
}
@@ -72,6 +71,7 @@
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
+ mac->vendor = PEER_UNKNOWN;
/*reset sec info */
rtl_cam_reset_sec_info(hw);
@@ -87,6 +87,8 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_tcb_desc tcb_desc;
+ memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
goto err_free;
@@ -94,8 +96,8 @@
if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
goto err_free;
-
- rtlpriv->intf_ops->adapter_tx(hw, skb);
+ if (!rtlpriv->intf_ops->waitq_insert(hw, skb))
+ rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);
return;
@@ -136,10 +138,26 @@
mac->link_state = MAC80211_LINKED;
rtlpriv->cfg->ops->set_bcn_reg(hw);
+ if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G)
+ mac->basic_rates = 0xfff;
+ else
+ mac->basic_rates = 0xff0;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
+ (u8 *) (&mac->basic_rates));
+
break;
case NL80211_IFTYPE_AP:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
("NL80211_IFTYPE_AP\n"));
+
+ mac->link_state = MAC80211_LINKED;
+ rtlpriv->cfg->ops->set_bcn_reg(hw);
+ if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G)
+ mac->basic_rates = 0xfff;
+ else
+ mac->basic_rates = 0xff0;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
+ (u8 *) (&mac->basic_rates));
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
@@ -186,13 +204,12 @@
mac->vif = NULL;
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
+ mac->vendor = PEER_UNKNOWN;
mac->opmode = NL80211_IFTYPE_UNSPECIFIED;
rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
-
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
-
static int rtl_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -224,10 +241,25 @@
/*For LPS */
if (changed & IEEE80211_CONF_CHANGE_PS) {
- if (conf->flags & IEEE80211_CONF_PS)
- rtl_lps_enter(hw);
- else
- rtl_lps_leave(hw);
+ cancel_delayed_work(&rtlpriv->works.ps_work);
+ cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
+ if (conf->flags & IEEE80211_CONF_PS) {
+ rtlpriv->psc.sw_ps_enabled = true;
+ /* sleep here is must, or we may recv the beacon and
+ * cause mac80211 into wrong ps state, this will cause
+ * power save nullfunc send fail, and further cause
+ * pkt loss, So sleep must quickly but not immediatly
+ * because that will cause nullfunc send by mac80211
+ * fail, and cause pkt loss, we have tested that 5mA
+ * is worked very well */
+ if (!rtlpriv->psc.multi_buffered)
+ queue_delayed_work(rtlpriv->works.rtl_wq,
+ &rtlpriv->works.ps_work,
+ MSECS(5));
+ } else {
+ rtl_swlps_rf_awake(hw);
+ rtlpriv->psc.sw_ps_enabled = false;
+ }
}
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
@@ -259,7 +291,7 @@
case NL80211_CHAN_NO_HT:
/* SC */
mac->cur_40_prime_sc =
- PRIME_CHNL_OFFSET_DONT_CARE;
+ PRIME_CHNL_OFFSET_DONT_CARE;
rtlphy->current_chan_bw = HT_CHANNEL_WIDTH_20;
mac->bw_40 = false;
break;
@@ -267,7 +299,7 @@
/* SC */
mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_UPPER;
rtlphy->current_chan_bw =
- HT_CHANNEL_WIDTH_20_40;
+ HT_CHANNEL_WIDTH_20_40;
mac->bw_40 = true;
/*wide channel */
@@ -278,7 +310,7 @@
/* SC */
mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_LOWER;
rtlphy->current_chan_bw =
- HT_CHANNEL_WIDTH_20_40;
+ HT_CHANNEL_WIDTH_20_40;
mac->bw_40 = true;
/*wide channel */
@@ -288,16 +320,29 @@
default:
mac->bw_40 = false;
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- ("switch case not processed\n"));
+ ("switch case not processed\n"));
break;
}
if (wide_chan <= 0)
wide_chan = 1;
+
+ /* In scanning, before we go offchannel we may send a ps=1 null
+ * to AP, and then we may send a ps = 0 null to AP quickly, but
+ * first null may have caused AP to put lots of packet to hw tx
+ * buffer. These packets must be tx'd before we go off channel
+ * so we must delay more time to let AP flush these packets
+ * before going offchannel, or dis-association or delete BA will
+ * happen by AP
+ */
+ if (rtlpriv->mac80211.offchan_deley) {
+ rtlpriv->mac80211.offchan_deley = false;
+ mdelay(50);
+ }
rtlphy->current_channel = wide_chan;
- rtlpriv->cfg->ops->set_channel_access(hw);
rtlpriv->cfg->ops->switch_channel(hw);
+ rtlpriv->cfg->ops->set_channel_access(hw);
rtlpriv->cfg->ops->set_bw_mode(hw,
hw->conf.channel_type);
}
@@ -345,27 +390,28 @@
}
}
- if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
- /*
- *TODO: BIT(5) is probe response BIT(8) is beacon
- *TODO: Use define for BIT(5) and BIT(8)
- */
- if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
- mac->rx_mgt_filter |= (BIT(5) | BIT(8));
- else
- mac->rx_mgt_filter &= ~(BIT(5) | BIT(8));
+ /* if ssid not set to hw don't check bssid
+ * here just used for linked scanning, & linked
+ * and nolink check bssid is set in set network_type */
+ if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) &&
+ (mac->link_state >= MAC80211_LINKED)) {
+ if (mac->opmode != NL80211_IFTYPE_AP) {
+ if (*new_flags & FIF_BCN_PRBRESP_PROMISC) {
+ rtlpriv->cfg->ops->set_chk_bssid(hw, false);
+ } else {
+ rtlpriv->cfg->ops->set_chk_bssid(hw, true);
+ }
+ }
}
if (changed_flags & FIF_CONTROL) {
if (*new_flags & FIF_CONTROL) {
mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF];
- mac->rx_ctrl_filter |= RTL_SUPPORTED_CTRL_FILTER;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
("Enable receive control frame.\n"));
} else {
mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF];
- mac->rx_ctrl_filter &= ~RTL_SUPPORTED_CTRL_FILTER;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
("Disable receive control frame.\n"));
}
@@ -382,14 +428,54 @@
("Disable receive other BSS's frame.\n"));
}
}
-
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MGT_FILTER,
- (u8 *) (&mac->rx_mgt_filter));
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CTRL_FILTER,
- (u8 *) (&mac->rx_ctrl_filter));
}
+static int rtl_op_sta_add(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry;
+ if (sta) {
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ if (rtlhal->current_bandtype == BAND_ON_2_4G) {
+ sta_entry->wireless_mode = WIRELESS_MODE_G;
+ if (sta->supp_rates[0] <= 0xf)
+ sta_entry->wireless_mode = WIRELESS_MODE_B;
+ if (sta->ht_cap.ht_supported == true)
+ sta_entry->wireless_mode = WIRELESS_MODE_N_24G;
+ } else if (rtlhal->current_bandtype == BAND_ON_5G) {
+ sta_entry->wireless_mode = WIRELESS_MODE_A;
+ if (sta->ht_cap.ht_supported == true)
+ sta_entry->wireless_mode = WIRELESS_MODE_N_24G;
+ }
+
+ /* I found some times mac80211 give wrong supp_rates for adhoc*/
+ if (rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
+ sta_entry->wireless_mode = WIRELESS_MODE_G;
+
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+ ("Add sta addr is "MAC_FMT"\n", MAC_ARG(sta->addr)));
+ rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
+ }
+ return 0;
+}
+static int rtl_op_sta_remove(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_sta_info *sta_entry;
+ if (sta) {
+ RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+ ("Remove sta addr is "MAC_FMT"\n", MAC_ARG(sta->addr)));
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ sta_entry->wireless_mode = 0;
+ sta_entry->ratr_index = 0;
+ }
+ return 0;
+}
static int _rtl_get_hal_qnum(u16 queue)
{
int qnum;
@@ -446,19 +532,18 @@
struct ieee80211_bss_conf *bss_conf, u32 changed)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct ieee80211_sta *sta = NULL;
mutex_lock(&rtlpriv->locks.conf_mutex);
-
if ((vif->type == NL80211_IFTYPE_ADHOC) ||
(vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_MESH_POINT)) {
-
if ((changed & BSS_CHANGED_BEACON) ||
(changed & BSS_CHANGED_BEACON_ENABLED &&
bss_conf->enable_beacon)) {
-
if (mac->beacon_enabled == 0) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("BSS_CHANGED_BEACON_ENABLED\n"));
@@ -470,8 +555,13 @@
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS],
0);
+
+ if (rtlpriv->cfg->ops->linked_set_reg)
+ rtlpriv->cfg->ops->linked_set_reg(hw);
}
- } else {
+ }
+ if ((changed & BSS_CHANGED_BEACON_ENABLED &&
+ !bss_conf->enable_beacon)) {
if (mac->beacon_enabled == 1) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("ADHOC DISABLE BEACON\n"));
@@ -482,7 +572,6 @@
[RTL_IBSS_INT_MASKS]);
}
}
-
if (changed & BSS_CHANGED_BEACON_INT) {
RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE,
("BSS_CHANGED_BEACON_INT\n"));
@@ -494,11 +583,25 @@
/*TODO: reference to enum ieee80211_bss_change */
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
+ /* we should reset all sec info & cam
+ * before set cam after linked, we should not
+ * reset in disassoc, that will cause tkip->wep
+ * fail because some flag will be wrong */
+ /* reset sec info */
+ rtl_cam_reset_sec_info(hw);
+ /* reset cam to fix wep fail issue
+ * when change from wpa to wep */
+ rtl_cam_reset_all_entry(hw);
+
mac->link_state = MAC80211_LINKED;
mac->cnt_after_linked = 0;
mac->assoc_id = bss_conf->aid;
memcpy(mac->bssid, bss_conf->bssid, 6);
+ if (rtlpriv->cfg->ops->linked_set_reg)
+ rtlpriv->cfg->ops->linked_set_reg(hw);
+ if (mac->opmode == NL80211_IFTYPE_STATION && sta)
+ rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("BSS_CHANGED_ASSOC\n"));
} else {
@@ -507,9 +610,7 @@
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
-
- /* reset sec info */
- rtl_cam_reset_sec_info(hw);
+ mac->vendor = PEER_UNKNOWN;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("BSS_CHANGED_UN_ASSOC\n"));
@@ -546,14 +647,10 @@
}
if (changed & BSS_CHANGED_HT) {
- struct ieee80211_sta *sta = NULL;
-
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("BSS_CHANGED_HT\n"));
-
rcu_read_lock();
- sta = ieee80211_find_sta(mac->vif, mac->bssid);
-
+ sta = get_sta(hw, vif, (u8 *)bss_conf->bssid);
if (sta) {
if (sta->ht_cap.ampdu_density >
mac->current_ampdu_density)
@@ -575,9 +672,7 @@
}
if (changed & BSS_CHANGED_BSSID) {
- struct ieee80211_sta *sta = NULL;
u32 basic_rates;
- u8 i;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID,
(u8 *) bss_conf->bssid);
@@ -585,96 +680,65 @@
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
(MAC_FMT "\n", MAC_ARG(bss_conf->bssid)));
+ mac->vendor = PEER_UNKNOWN;
memcpy(mac->bssid, bss_conf->bssid, 6);
- if (is_valid_ether_addr(bss_conf->bssid)) {
- switch (vif->type) {
- case NL80211_IFTYPE_UNSPECIFIED:
- break;
- case NL80211_IFTYPE_ADHOC:
- break;
- case NL80211_IFTYPE_STATION:
- break;
- case NL80211_IFTYPE_AP:
- break;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- ("switch case not process\n"));
- break;
- }
- rtlpriv->cfg->ops->set_network_type(hw, vif->type);
- } else
- rtlpriv->cfg->ops->set_network_type(hw,
- NL80211_IFTYPE_UNSPECIFIED);
-
- memset(mac->mcs, 0, 16);
- mac->ht_enable = false;
- mac->sgi_40 = false;
- mac->sgi_20 = false;
-
- if (!bss_conf->use_short_slot)
- mac->mode = WIRELESS_MODE_B;
- else
- mac->mode = WIRELESS_MODE_G;
+ rtlpriv->cfg->ops->set_network_type(hw, vif->type);
rcu_read_lock();
- sta = ieee80211_find_sta(mac->vif, mac->bssid);
-
- if (sta) {
- if (sta->ht_cap.ht_supported) {
- mac->mode = WIRELESS_MODE_N_24G;
- mac->ht_enable = true;
- }
-
- if (mac->ht_enable) {
- u16 ht_cap = sta->ht_cap.cap;
- memcpy(mac->mcs, (u8 *) (&sta->ht_cap.mcs), 16);
-
- for (i = 0; i < 16; i++)
- RT_TRACE(rtlpriv, COMP_MAC80211,
- DBG_LOUD, ("%x ",
- mac->mcs[i]));
- RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
- ("\n"));
-
- if (ht_cap & IEEE80211_HT_CAP_SGI_40)
- mac->sgi_40 = true;
-
- if (ht_cap & IEEE80211_HT_CAP_SGI_20)
- mac->sgi_20 = true;
-
- /*
- * for cisco 1252 bw20 it's wrong
- * if (ht_cap &
- * IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
- * mac->bw_40 = true;
- * }
- */
- }
+ sta = get_sta(hw, vif, (u8 *)bss_conf->bssid);
+ if (!sta) {
+ rcu_read_unlock();
+ goto out;
}
- rcu_read_unlock();
- /*mac80211 just give us CCK rates any time
- *So we add G rate in basic rates when
- not in B mode*/
- if (changed & BSS_CHANGED_BASIC_RATES) {
- if (mac->mode == WIRELESS_MODE_B)
- basic_rates = bss_conf->basic_rates | 0x00f;
+ if (rtlhal->current_bandtype == BAND_ON_5G) {
+ mac->mode = WIRELESS_MODE_A;
+ } else {
+ if (sta->supp_rates[0] <= 0xf)
+ mac->mode = WIRELESS_MODE_B;
else
- basic_rates = bss_conf->basic_rates | 0xff0;
+ mac->mode = WIRELESS_MODE_G;
+ }
- if (!vif)
- goto out;
+ if (sta->ht_cap.ht_supported) {
+ if (rtlhal->current_bandtype == BAND_ON_2_4G)
+ mac->mode = WIRELESS_MODE_N_24G;
+ else
+ mac->mode = WIRELESS_MODE_N_5G;
+ }
+
+ /* just station need it, because ibss & ap mode will
+ * set in sta_add, and will be NULL here */
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
+ struct rtl_sta_info *sta_entry;
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ sta_entry->wireless_mode = mac->mode;
+ }
+
+ if (sta->ht_cap.ht_supported) {
+ mac->ht_enable = true;
+
+ /*
+ * for cisco 1252 bw20 it's wrong
+ * if (ht_cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+ * mac->bw_40 = true;
+ * }
+ * */
+ }
+
+ if (changed & BSS_CHANGED_BASIC_RATES) {
+ /* for 5G must << RATE_6M_INDEX=4,
+ * because 5G have no cck rate*/
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ basic_rates = sta->supp_rates[1] << 4;
+ else
+ basic_rates = sta->supp_rates[0];
mac->basic_rates = basic_rates;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
(u8 *) (&basic_rates));
-
- if (rtlpriv->dm.useramask)
- rtlpriv->cfg->ops->update_rate_mask(hw, 0);
- else
- rtlpriv->cfg->ops->update_rate_table(hw);
-
}
+ rcu_read_unlock();
}
/*
@@ -760,16 +824,17 @@
case IEEE80211_AMPDU_TX_START:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("IEEE80211_AMPDU_TX_START: TID:%d\n", tid));
- return rtl_tx_agg_start(hw, sta->addr, tid, ssn);
+ return rtl_tx_agg_start(hw, sta, tid, ssn);
break;
case IEEE80211_AMPDU_TX_STOP:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid));
- return rtl_tx_agg_stop(hw, sta->addr, tid);
+ return rtl_tx_agg_stop(hw, sta, tid);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid));
+ rtl_tx_agg_oper(hw, sta, tid);
break;
case IEEE80211_AMPDU_RX_START:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
@@ -799,8 +864,12 @@
if (mac->link_state == MAC80211_LINKED) {
rtl_lps_leave(hw);
mac->link_state = MAC80211_LINKED_SCANNING;
- } else
+ } else {
rtl_ips_nic_on(hw);
+ }
+
+ /* Dual mac */
+ rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false;
rtlpriv->cfg->ops->led_control(hw, LED_CTL_SITE_SURVEY);
rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_BACKUP);
@@ -812,22 +881,19 @@
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("\n"));
-
- rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_RESTORE);
mac->act_scanning = false;
+ /* Dual mac */
+ rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false;
+
if (mac->link_state == MAC80211_LINKED_SCANNING) {
mac->link_state = MAC80211_LINKED;
-
- /* fix fwlps issue */
- rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
-
- if (rtlpriv->dm.useramask)
- rtlpriv->cfg->ops->update_rate_mask(hw, 0);
- else
- rtlpriv->cfg->ops->update_rate_table(hw);
-
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
+ /* fix fwlps issue */
+ rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
+ }
}
+ rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_RESTORE);
}
static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -858,49 +924,73 @@
rtl_ips_nic_on(hw);
mutex_lock(&rtlpriv->locks.conf_mutex);
/* <1> get encryption alg */
+
switch (key->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
key_type = WEP40_ENCRYPTION;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:WEP40\n"));
- rtlpriv->sec.use_defaultkey = true;
break;
case WLAN_CIPHER_SUITE_WEP104:
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
("alg:WEP104\n"));
key_type = WEP104_ENCRYPTION;
- rtlpriv->sec.use_defaultkey = true;
break;
case WLAN_CIPHER_SUITE_TKIP:
key_type = TKIP_ENCRYPTION;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:TKIP\n"));
- if (mac->opmode == NL80211_IFTYPE_ADHOC)
- rtlpriv->sec.use_defaultkey = true;
break;
case WLAN_CIPHER_SUITE_CCMP:
key_type = AESCCMP_ENCRYPTION;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:CCMP\n"));
- if (mac->opmode == NL80211_IFTYPE_ADHOC)
- rtlpriv->sec.use_defaultkey = true;
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("alg_err:%x!!!!:\n", key->cipher));
goto out_unlock;
}
+ if (key_type == WEP40_ENCRYPTION ||
+ key_type == WEP104_ENCRYPTION ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ rtlpriv->sec.use_defaultkey = true;
+
/* <2> get key_idx */
key_idx = (u8) (key->keyidx);
if (key_idx > 3)
goto out_unlock;
/* <3> if pairwise key enable_hw_sec */
group_key = !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE);
- if ((!group_key) || (mac->opmode == NL80211_IFTYPE_ADHOC) ||
- rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION) {
- if (rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION &&
- (key_type == WEP40_ENCRYPTION ||
- key_type == WEP104_ENCRYPTION))
- wep_only = true;
- rtlpriv->sec.pairwise_enc_algorithm = key_type;
- rtlpriv->cfg->ops->enable_hw_sec(hw);
+
+ /* wep always be group key, but there are two conditions:
+ * 1) wep only: is just for wep enc, in this condition
+ * rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION
+ * will be true & enable_hw_sec will be set when wep
+ * ke setting.
+ * 2) wep(group) + AES(pairwise): some AP like cisco
+ * may use it, in this condition enable_hw_sec will not
+ * be set when wep key setting */
+ /* we must reset sec_info after lingked before set key,
+ * or some flag will be wrong*/
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ if (!group_key || key_type == WEP40_ENCRYPTION ||
+ key_type == WEP104_ENCRYPTION) {
+ if (group_key)
+ wep_only = true;
+ rtlpriv->cfg->ops->enable_hw_sec(hw);
+ }
+ } else {
+ if ((!group_key) || (mac->opmode == NL80211_IFTYPE_ADHOC) ||
+ rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION) {
+ if (rtlpriv->sec.pairwise_enc_algorithm ==
+ NO_ENCRYPTION &&
+ (key_type == WEP40_ENCRYPTION ||
+ key_type == WEP104_ENCRYPTION))
+ wep_only = true;
+ rtlpriv->sec.pairwise_enc_algorithm = key_type;
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1"
+ " TKIP:2 AES:4 WEP104:5)\n", key_type));
+ rtlpriv->cfg->ops->enable_hw_sec(hw);
+ }
}
/* <4> set key based on cmd */
switch (cmd) {
@@ -932,6 +1022,7 @@
if (!sta) {
RT_ASSERT(false, ("pairwise key withnot"
"mac_addr\n"));
+
err = -EOPNOTSUPP;
goto out_unlock;
}
@@ -959,6 +1050,10 @@
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
("disable key delete one entry\n"));
/*set local buf about wep key. */
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ if (sta)
+ rtl_cam_del_entry(hw, sta->addr);
+ }
memset(rtlpriv->sec.key_buf[key_idx], 0, key->keylen);
rtlpriv->sec.key_len[key_idx] = 0;
memcpy(mac_addr, zero_addr, ETH_ALEN);
@@ -1011,6 +1106,18 @@
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
+/* this function is called by mac80211 to flush tx buffer
+ * before switch channle or power save, or tx buffer packet
+ * maybe send after offchannel or rf sleep, this may cause
+ * dis-association by AP */
+static void rtl_op_flush(struct ieee80211_hw *hw, bool drop)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->intf_ops->flush)
+ rtlpriv->intf_ops->flush(hw, drop);
+}
+
const struct ieee80211_ops rtl_ops = {
.start = rtl_op_start,
.stop = rtl_op_stop,
@@ -1019,6 +1126,8 @@
.remove_interface = rtl_op_remove_interface,
.config = rtl_op_config,
.configure_filter = rtl_op_configure_filter,
+ .sta_add = rtl_op_sta_add,
+ .sta_remove = rtl_op_sta_remove,
.set_key = rtl_op_set_key,
.conf_tx = rtl_op_conf_tx,
.bss_info_changed = rtl_op_bss_info_changed,
@@ -1030,4 +1139,5 @@
.sw_scan_start = rtl_op_sw_scan_start,
.sw_scan_complete = rtl_op_sw_scan_complete,
.rfkill_poll = rtl_op_rfkill_poll,
+ .flush = rtl_op_flush,
};
diff --git a/drivers/net/wireless/rtlwifi/core.h b/drivers/net/wireless/rtlwifi/core.h
index 0ef31c3c..4b247db 100644
--- a/drivers/net/wireless/rtlwifi/core.h
+++ b/drivers/net/wireless/rtlwifi/core.h
@@ -24,6 +24,7 @@
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
+ *
*****************************************************************************/
#ifndef __RTL_CORE_H__
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 590f14f..50de6f5 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -52,8 +52,6 @@
{11, 0, 0, 28}
};
-static void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset,
- u8 *pbuf);
static void efuse_shadow_read_1byte(struct ieee80211_hw *hw, u16 offset,
u8 *value);
static void efuse_shadow_read_2byte(struct ieee80211_hw *hw, u16 offset,
@@ -79,7 +77,7 @@
u8 *targetdata);
static u8 efuse_word_enable_data_write(struct ieee80211_hw *hw,
u16 efuse_addr, u8 word_en, u8 *data);
-static void efuse_power_switch(struct ieee80211_hw *hw, u8 bwrite,
+static void efuse_power_switch(struct ieee80211_hw *hw, u8 write,
u8 pwrstate);
static u16 efuse_get_current_size(struct ieee80211_hw *hw);
static u8 efuse_calculate_word_cnts(u8 word_en);
@@ -115,8 +113,10 @@
u8 bytetemp;
u8 temp;
u32 k = 0;
+ const u32 efuse_len =
+ rtlpriv->cfg->maps[EFUSE_REAL_CONTENT_SIZE];
- if (address < EFUSE_REAL_CONTENT_LEN) {
+ if (address < efuse_len) {
temp = address & 0xFF;
rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
temp);
@@ -158,11 +158,13 @@
u8 bytetemp;
u8 temp;
u32 k = 0;
+ const u32 efuse_len =
+ rtlpriv->cfg->maps[EFUSE_REAL_CONTENT_SIZE];
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
("Addr=%x Data =%x\n", address, value));
- if (address < EFUSE_REAL_CONTENT_LEN) {
+ if (address < efuse_len) {
rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL], value);
temp = address & 0xFF;
@@ -198,7 +200,7 @@
}
-static void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf)
+void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u32 value32;
@@ -233,26 +235,45 @@
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
- u8 efuse_tbl[EFUSE_MAP_LEN];
+ u8 *efuse_tbl;
u8 rtemp8[1];
u16 efuse_addr = 0;
u8 offset, wren;
u16 i;
u16 j;
- u16 efuse_word[EFUSE_MAX_SECTION][EFUSE_MAX_WORD_UNIT];
+ const u16 efuse_max_section =
+ rtlpriv->cfg->maps[EFUSE_MAX_SECTION_MAP];
+ const u32 efuse_len =
+ rtlpriv->cfg->maps[EFUSE_REAL_CONTENT_SIZE];
+ u16 **efuse_word;
u16 efuse_utilized = 0;
u8 efuse_usage;
- if ((_offset + _size_byte) > EFUSE_MAP_LEN) {
+ if ((_offset + _size_byte) > rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]) {
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
("read_efuse(): Invalid offset(%#x) with read "
"bytes(%#x)!!\n", _offset, _size_byte));
return;
}
- for (i = 0; i < EFUSE_MAX_SECTION; i++)
+ /* allocate memory for efuse_tbl and efuse_word */
+ efuse_tbl = kmalloc(rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE] *
+ sizeof(u8), GFP_ATOMIC);
+ if (!efuse_tbl)
+ return;
+ efuse_word = kmalloc(EFUSE_MAX_WORD_UNIT * sizeof(u16 *), GFP_ATOMIC);
+ if (!efuse_word)
+ goto done;
+ for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+ efuse_word[i] = kmalloc(efuse_max_section * sizeof(u16),
+ GFP_ATOMIC);
+ if (!efuse_word[i])
+ goto done;
+ }
+
+ for (i = 0; i < efuse_max_section; i++)
for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
- efuse_word[i][j] = 0xFFFF;
+ efuse_word[j][i] = 0xFFFF;
read_efuse_byte(hw, efuse_addr, rtemp8);
if (*rtemp8 != 0xFF) {
@@ -262,10 +283,10 @@
efuse_addr++;
}
- while ((*rtemp8 != 0xFF) && (efuse_addr < EFUSE_REAL_CONTENT_LEN)) {
+ while ((*rtemp8 != 0xFF) && (efuse_addr < efuse_len)) {
offset = ((*rtemp8 >> 4) & 0x0f);
- if (offset < EFUSE_MAX_SECTION) {
+ if (offset < efuse_max_section) {
wren = (*rtemp8 & 0x0f);
RTPRINT(rtlpriv, FEEPROM, EFUSE_READ_ALL,
("offset-%d Worden=%x\n", offset, wren));
@@ -279,9 +300,10 @@
read_efuse_byte(hw, efuse_addr, rtemp8);
efuse_addr++;
efuse_utilized++;
- efuse_word[offset][i] = (*rtemp8 & 0xff);
+ efuse_word[i][offset] =
+ (*rtemp8 & 0xff);
- if (efuse_addr >= EFUSE_REAL_CONTENT_LEN)
+ if (efuse_addr >= efuse_len)
break;
RTPRINT(rtlpriv, FEEPROM,
@@ -291,10 +313,10 @@
read_efuse_byte(hw, efuse_addr, rtemp8);
efuse_addr++;
efuse_utilized++;
- efuse_word[offset][i] |=
+ efuse_word[i][offset] |=
(((u16)*rtemp8 << 8) & 0xff00);
- if (efuse_addr >= EFUSE_REAL_CONTENT_LEN)
+ if (efuse_addr >= efuse_len)
break;
}
@@ -305,18 +327,18 @@
RTPRINT(rtlpriv, FEEPROM, EFUSE_READ_ALL,
("Addr=%d\n", efuse_addr));
read_efuse_byte(hw, efuse_addr, rtemp8);
- if (*rtemp8 != 0xFF && (efuse_addr < 512)) {
+ if (*rtemp8 != 0xFF && (efuse_addr < efuse_len)) {
efuse_utilized++;
efuse_addr++;
}
}
- for (i = 0; i < EFUSE_MAX_SECTION; i++) {
+ for (i = 0; i < efuse_max_section; i++) {
for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) {
efuse_tbl[(i * 8) + (j * 2)] =
- (efuse_word[i][j] & 0xff);
+ (efuse_word[j][i] & 0xff);
efuse_tbl[(i * 8) + ((j * 2) + 1)] =
- ((efuse_word[i][j] >> 8) & 0xff);
+ ((efuse_word[j][i] >> 8) & 0xff);
}
}
@@ -324,12 +346,17 @@
pbuf[i] = efuse_tbl[_offset + i];
rtlefuse->efuse_usedbytes = efuse_utilized;
- efuse_usage = (u8)((efuse_utilized * 100) / EFUSE_REAL_CONTENT_LEN);
+ efuse_usage = (u8) ((efuse_utilized * 100) / efuse_len);
rtlefuse->efuse_usedpercentage = efuse_usage;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_EFUSE_BYTES,
(u8 *)&efuse_utilized);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_EFUSE_USAGE,
(u8 *)&efuse_usage);
+done:
+ for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++)
+ kfree(efuse_word[i]);
+ kfree(efuse_word);
+ kfree(efuse_tbl);
}
bool efuse_shadow_update_chk(struct ieee80211_hw *hw)
@@ -338,11 +365,11 @@
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
u8 section_idx, i, Base;
u16 words_need = 0, hdr_num = 0, totalbytes, efuse_used;
- bool bwordchanged, bresult = true;
+ bool wordchanged, result = true;
for (section_idx = 0; section_idx < 16; section_idx++) {
Base = section_idx * 8;
- bwordchanged = false;
+ wordchanged = false;
for (i = 0; i < 8; i = i + 2) {
if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][Base + i] !=
@@ -351,11 +378,11 @@
rtlefuse->efuse_map[EFUSE_MODIFY_MAP][Base + i +
1])) {
words_need++;
- bwordchanged = true;
+ wordchanged = true;
}
}
- if (bwordchanged == true)
+ if (wordchanged == true)
hdr_num++;
}
@@ -364,14 +391,14 @@
if ((totalbytes + efuse_used) >=
(EFUSE_MAX_SIZE - EFUSE_OOB_PROTECT_BYTES))
- bresult = false;
+ result = false;
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
("efuse_shadow_update_chk(): totalbytes(%#x), "
"hdr_num(%#x), words_need(%#x), efuse_used(%d)\n",
totalbytes, hdr_num, words_need, efuse_used));
- return bresult;
+ return result;
}
void efuse_shadow_read(struct ieee80211_hw *hw, u8 type,
@@ -394,7 +421,7 @@
else if (type == 2)
efuse_shadow_write_2byte(hw, offset, (u16) value);
else if (type == 4)
- efuse_shadow_write_4byte(hw, offset, (u32) value);
+ efuse_shadow_write_4byte(hw, offset, value);
}
@@ -478,9 +505,10 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
- if (rtlefuse->autoload_failflag == true) {
- memset(&rtlefuse->efuse_map[EFUSE_INIT_MAP][0], 0xFF, 128);
- } else
+ if (rtlefuse->autoload_failflag == true)
+ memset(&rtlefuse->efuse_map[EFUSE_INIT_MAP][0], 0xFF,
+ rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]);
+ else
efuse_read_all_map(hw, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0]);
memcpy(&rtlefuse->efuse_map[EFUSE_MODIFY_MAP][0],
@@ -572,7 +600,7 @@
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u8 tmpidx = 0;
- int bresult;
+ int result;
rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
(u8) (addr & 0xff));
@@ -592,19 +620,18 @@
if (tmpidx < 100) {
*data = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL]);
- bresult = true;
+ result = true;
} else {
*data = 0xff;
- bresult = false;
+ result = false;
}
- return bresult;
+ return result;
}
static int efuse_one_byte_write(struct ieee80211_hw *hw, u16 addr, u8 data)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u8 tmpidx = 0;
- bool bresult;
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
("Addr = %x Data=%x\n", addr, data));
@@ -626,17 +653,16 @@
}
if (tmpidx < 100)
- bresult = true;
- else
- bresult = false;
+ return true;
- return bresult;
+ return false;
}
static void efuse_read_all_map(struct ieee80211_hw *hw, u8 * efuse)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
efuse_power_switch(hw, false, true);
- read_efuse(hw, 0, 128, efuse);
+ read_efuse(hw, 0, rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE], efuse);
efuse_power_switch(hw, false, false);
}
@@ -644,7 +670,7 @@
u8 efuse_data, u8 offset, u8 *tmpdata,
u8 *readstate)
{
- bool bdataempty = true;
+ bool dataempty = true;
u8 hoffset;
u8 tmpidx;
u8 hworden;
@@ -660,13 +686,13 @@
&efuse_data)) {
tmpdata[tmpidx] = efuse_data;
if (efuse_data != 0xff)
- bdataempty = true;
+ dataempty = true;
}
}
- if (bdataempty == true)
+ if (dataempty == true) {
*readstate = PG_STATE_DATA;
- else {
+ } else {
*efuse_addr = *efuse_addr + (word_cnts * 2) + 1;
*readstate = PG_STATE_HEADER;
}
@@ -680,12 +706,9 @@
static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset, u8 *data)
{
u8 readstate = PG_STATE_HEADER;
-
- bool bcontinual = true;
-
+ bool continual = true;
u8 efuse_data, word_cnts = 0;
u16 efuse_addr = 0;
- u8 hworden = 0;
u8 tmpdata[8];
if (data == NULL)
@@ -696,7 +719,7 @@
memset(data, 0xff, PGPKT_DATA_SIZE * sizeof(u8));
memset(tmpdata, 0xff, PGPKT_DATA_SIZE * sizeof(u8));
- while (bcontinual && (efuse_addr < EFUSE_MAX_SIZE)) {
+ while (continual && (efuse_addr < EFUSE_MAX_SIZE)) {
if (readstate & PG_STATE_HEADER) {
if (efuse_one_byte_read(hw, efuse_addr, &efuse_data)
&& (efuse_data != 0xFF))
@@ -705,9 +728,9 @@
offset, tmpdata,
&readstate);
else
- bcontinual = false;
+ continual = false;
} else if (readstate & PG_STATE_DATA) {
- efuse_word_enable_data_read(hworden, tmpdata, data);
+ efuse_word_enable_data_read(0, tmpdata, data);
efuse_addr = efuse_addr + (word_cnts * 2) + 1;
readstate = PG_STATE_HEADER;
}
@@ -725,13 +748,13 @@
}
static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
- u8 efuse_data, u8 offset, int *bcontinual,
+ u8 efuse_data, u8 offset, int *continual,
u8 *write_state, struct pgpkt_struct *target_pkt,
- int *repeat_times, int *bresult, u8 word_en)
+ int *repeat_times, int *result, u8 word_en)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct pgpkt_struct tmp_pkt;
- int bdataempty = true;
+ bool dataempty = true;
u8 originaldata[8 * sizeof(u8)];
u8 badworden = 0x0F;
u8 match_word_en, tmp_word_en;
@@ -751,10 +774,10 @@
u16 address = *efuse_addr + 1 + tmpindex;
if (efuse_one_byte_read(hw, address,
&efuse_data) && (efuse_data != 0xFF))
- bdataempty = false;
+ dataempty = false;
}
- if (bdataempty == false) {
+ if (dataempty == false) {
*efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1;
*write_state = PG_STATE_HEADER;
} else {
@@ -799,24 +822,25 @@
tmp_word_en &= (~BIT(1));
if ((target_pkt->word_en & BIT(2)) ^
- (match_word_en & BIT(2)))
+ (match_word_en & BIT(2)))
tmp_word_en &= (~BIT(2));
if ((target_pkt->word_en & BIT(3)) ^
- (match_word_en & BIT(3)))
+ (match_word_en & BIT(3)))
tmp_word_en &= (~BIT(3));
if ((tmp_word_en & 0x0F) != 0x0F) {
*efuse_addr = efuse_get_current_size(hw);
target_pkt->offset = offset;
target_pkt->word_en = tmp_word_en;
- } else
- *bcontinual = false;
+ } else {
+ *continual = false;
+ }
*write_state = PG_STATE_HEADER;
*repeat_times += 1;
if (*repeat_times > EFUSE_REPEAT_THRESHOLD_) {
- *bcontinual = false;
- *bresult = false;
+ *continual = false;
+ *result = false;
}
} else {
*efuse_addr += (2 * tmp_word_cnts) + 1;
@@ -830,9 +854,9 @@
}
static void efuse_write_data_case2(struct ieee80211_hw *hw, u16 *efuse_addr,
- int *bcontinual, u8 *write_state,
+ int *continual, u8 *write_state,
struct pgpkt_struct target_pkt,
- int *repeat_times, int *bresult)
+ int *repeat_times, int *result)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct pgpkt_struct tmp_pkt;
@@ -846,14 +870,14 @@
efuse_one_byte_write(hw, *efuse_addr, pg_header);
efuse_one_byte_read(hw, *efuse_addr, &tmp_header);
- if (tmp_header == pg_header)
+ if (tmp_header == pg_header) {
*write_state = PG_STATE_DATA;
- else if (tmp_header == 0xFF) {
+ } else if (tmp_header == 0xFF) {
*write_state = PG_STATE_HEADER;
*repeat_times += 1;
if (*repeat_times > EFUSE_REPEAT_THRESHOLD_) {
- *bcontinual = false;
- *bresult = false;
+ *continual = false;
+ *result = false;
}
} else {
tmp_pkt.offset = (tmp_header >> 4) & 0x0F;
@@ -875,17 +899,19 @@
reorg_worden,
originaldata);
*efuse_addr = efuse_get_current_size(hw);
- } else
+ } else {
*efuse_addr = *efuse_addr + (tmp_word_cnts * 2)
+ 1;
- } else
+ }
+ } else {
*efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1;
+ }
*write_state = PG_STATE_HEADER;
*repeat_times += 1;
if (*repeat_times > EFUSE_REPEAT_THRESHOLD_) {
- *bcontinual = false;
- *bresult = false;
+ *continual = false;
+ *result = false;
}
RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
@@ -899,7 +925,7 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct pgpkt_struct target_pkt;
u8 write_state = PG_STATE_HEADER;
- int bcontinual = true, bdataempty = true, bresult = true;
+ int continual = true, dataempty = true, result = true;
u16 efuse_addr = 0;
u8 efuse_data;
u8 target_word_cnts = 0;
@@ -923,11 +949,11 @@
RTPRINT(rtlpriv, FEEPROM, EFUSE_PG, ("efuse Power ON\n"));
- while (bcontinual && (efuse_addr <
+ while (continual && (efuse_addr <
(EFUSE_MAX_SIZE - EFUSE_OOB_PROTECT_BYTES))) {
if (write_state == PG_STATE_HEADER) {
- bdataempty = true;
+ dataempty = true;
badworden = 0x0F;
RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
("efuse PG_STATE_HEADER\n"));
@@ -936,32 +962,30 @@
(efuse_data != 0xFF))
efuse_write_data_case1(hw, &efuse_addr,
efuse_data, offset,
- &bcontinual,
+ &continual,
&write_state, &target_pkt,
- &repeat_times, &bresult,
+ &repeat_times, &result,
word_en);
else
efuse_write_data_case2(hw, &efuse_addr,
- &bcontinual,
+ &continual,
&write_state,
target_pkt,
&repeat_times,
- &bresult);
+ &result);
} else if (write_state == PG_STATE_DATA) {
RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
("efuse PG_STATE_DATA\n"));
- badworden = 0x0f;
badworden =
efuse_word_enable_data_write(hw, efuse_addr + 1,
target_pkt.word_en,
target_pkt.data);
if ((badworden & 0x0F) == 0x0F) {
- bcontinual = false;
+ continual = false;
} else {
- efuse_addr =
- efuse_addr + (2 * target_word_cnts) + 1;
+ efuse_addr += (2 * target_word_cnts) + 1;
target_pkt.offset = offset;
target_pkt.word_en = badworden;
@@ -971,8 +995,8 @@
write_state = PG_STATE_HEADER;
repeat_times++;
if (repeat_times > EFUSE_REPEAT_THRESHOLD_) {
- bcontinual = false;
- bresult = false;
+ continual = false;
+ result = false;
}
RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
("efuse PG_STATE_HEADER-3\n"));
@@ -1072,13 +1096,15 @@
return badworden;
}
-static void efuse_power_switch(struct ieee80211_hw *hw, u8 bwrite, u8 pwrstate)
+static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
u8 tempval;
u16 tmpV16;
- if (pwrstate == true) {
+ if (pwrstate && (rtlhal->hw_type !=
+ HARDWARE_TYPE_RTL8192SE)) {
tmpV16 = rtl_read_word(rtlpriv,
rtlpriv->cfg->maps[SYS_ISO_CTRL]);
if (!(tmpV16 & rtlpriv->cfg->maps[EFUSE_PWC_EV12V])) {
@@ -1106,20 +1132,29 @@
}
}
- if (pwrstate == true) {
- if (bwrite == true) {
+ if (pwrstate) {
+ if (write) {
tempval = rtl_read_byte(rtlpriv,
rtlpriv->cfg->maps[EFUSE_TEST] +
3);
- tempval &= 0x0F;
- tempval |= (VOLTAGE_V25 << 4);
+
+ if (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE) {
+ tempval &= 0x0F;
+ tempval |= (VOLTAGE_V25 << 4);
+ }
+
rtl_write_byte(rtlpriv,
rtlpriv->cfg->maps[EFUSE_TEST] + 3,
(tempval | 0x80));
}
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE) {
+ rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CLK],
+ 0x03);
+ }
+
} else {
- if (bwrite == true) {
+ if (write) {
tempval = rtl_read_byte(rtlpriv,
rtlpriv->cfg->maps[EFUSE_TEST] +
3);
@@ -1128,18 +1163,23 @@
(tempval & 0x7F));
}
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE) {
+ rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CLK],
+ 0x02);
+ }
+
}
}
static u16 efuse_get_current_size(struct ieee80211_hw *hw)
{
- int bcontinual = true;
+ int continual = true;
u16 efuse_addr = 0;
u8 hoffset, hworden;
u8 efuse_data, word_cnts;
- while (bcontinual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
+ while (continual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
&& (efuse_addr < EFUSE_MAX_SIZE)) {
if (efuse_data != 0xFF) {
hoffset = (efuse_data >> 4) & 0x0F;
@@ -1147,7 +1187,7 @@
word_cnts = efuse_calculate_word_cnts(hworden);
efuse_addr = efuse_addr + (word_cnts * 2) + 1;
} else {
- bcontinual = false;
+ continual = false;
}
}
diff --git a/drivers/net/wireless/rtlwifi/efuse.h b/drivers/net/wireless/rtlwifi/efuse.h
index 47774dd..164daba 100644
--- a/drivers/net/wireless/rtlwifi/efuse.h
+++ b/drivers/net/wireless/rtlwifi/efuse.h
@@ -30,9 +30,10 @@
#ifndef __RTL_EFUSE_H_
#define __RTL_EFUSE_H_
+#define EFUSE_IC_ID_OFFSET 506
+
#define EFUSE_REAL_CONTENT_LEN 512
#define EFUSE_MAP_LEN 128
-#define EFUSE_MAX_SECTION 16
#define EFUSE_MAX_WORD_UNIT 4
#define EFUSE_INIT_MAP 0
@@ -52,6 +53,7 @@
#define _PRE_EXECUTE_READ_CMD_
#define EFUSE_REPEAT_THRESHOLD_ 3
+#define EFUSE_ERROE_HANDLE 1
struct efuse_map {
u8 offset;
@@ -103,6 +105,7 @@
u8 tx_power_g[14];
};
+extern void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf);
extern void efuse_initialize(struct ieee80211_hw *hw);
extern u8 efuse_read_1byte(struct ieee80211_hw *hw, u16 address);
extern void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 5938f6e..a409528 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -32,6 +32,7 @@
#include "pci.h"
#include "base.h"
#include "ps.h"
+#include "efuse.h"
static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
INTEL_VENDOR_ID,
@@ -40,6 +41,31 @@
SIS_VENDOR_ID
};
+static const u8 ac_to_hwq[] = {
+ VO_QUEUE,
+ VI_QUEUE,
+ BE_QUEUE,
+ BK_QUEUE
+};
+
+static u8 _rtl_mac_to_hwqueue(struct ieee80211_hw *hw,
+ struct sk_buff *skb)
+{
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ __le16 fc = rtl_get_fc(skb);
+ u8 queue_index = skb_get_queue_mapping(skb);
+
+ if (unlikely(ieee80211_is_beacon(fc)))
+ return BEACON_QUEUE;
+ if (ieee80211_is_mgmt(fc))
+ return MGNT_QUEUE;
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE)
+ if (ieee80211_is_nullfunc(fc))
+ return HIGH_QUEUE;
+
+ return ac_to_hwq[queue_index];
+}
+
/* Update PCI dependent default settings*/
static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
{
@@ -48,6 +74,7 @@
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor;
+ u8 init_aspm;
ppsc->reg_rfps_level = 0;
ppsc->support_aspm = 0;
@@ -125,7 +152,7 @@
bool support_backdoor = true;
ppsc->support_aspm = support_aspm;
- /*if(priv->oem_id == RT_CID_TOSHIBA &&
+ /*if (priv->oem_id == RT_CID_TOSHIBA &&
!priv->ndis_adapter.amd_l1_patch)
support_backdoor = false; */
@@ -145,6 +172,13 @@
("switch case not process\n"));
break;
}
+
+ /* toshiba aspm issue, toshiba will set aspm selfly
+ * so we should not set aspm in driver */
+ pci_read_config_byte(rtlpci->pdev, 0x80, &init_aspm);
+ if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8192SE &&
+ init_aspm == 0x43)
+ ppsc->support_aspm = false;
}
static bool _rtl_pci_platform_switch_device_pci_aspm(
@@ -152,28 +186,28 @@
u8 value)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- bool bresult = false;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- value |= 0x40;
+ if (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE)
+ value |= 0x40;
pci_write_config_byte(rtlpci->pdev, 0x80, value);
- return bresult;
+ return false;
}
/*When we set 0x01 to enable clk request. Set 0x0 to disable clk req.*/
static bool _rtl_pci_switch_clk_req(struct ieee80211_hw *hw, u8 value)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- u8 buffer;
- bool bresult = false;
-
- buffer = value;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
pci_write_config_byte(rtlpci->pdev, 0x81, value);
- bresult = true;
- return bresult;
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE)
+ udelay(100);
+
+ return true;
}
/*Disable RTL8192SE ASPM & Disable Pci Bridge ASPM*/
@@ -191,6 +225,10 @@
u16 pcibridge_linkctrlreg = pcipriv->ndis_adapter.
pcibridge_linkctrlreg;
u16 aspmlevel = 0;
+ u8 tmp_u1b = 0;
+
+ if (!ppsc->support_aspm)
+ return;
if (pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) {
RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
@@ -204,11 +242,8 @@
_rtl_pci_switch_clk_req(hw, 0x0);
}
- if (1) {
- /*for promising device will in L0 state after an I/O. */
- u8 tmp_u1b;
- pci_read_config_byte(rtlpci->pdev, 0x80, &tmp_u1b);
- }
+ /*for promising device will in L0 state after an I/O. */
+ pci_read_config_byte(rtlpci->pdev, 0x80, &tmp_u1b);
/*Set corresponding value. */
aspmlevel |= BIT(0) | BIT(1);
@@ -224,7 +259,6 @@
rtl_pci_raw_write_port_uchar(PCI_CONF_DATA, pcibridge_linkctrlreg);
udelay(50);
-
}
/*
@@ -249,6 +283,9 @@
u8 u_pcibridge_aspmsetting;
u8 u_device_aspmsetting;
+ if (!ppsc->support_aspm)
+ return;
+
if (pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) {
RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
("PCI(Bridge) UNKNOWN.\n"));
@@ -293,7 +330,7 @@
RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0);
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_CLK_REQ);
}
- udelay(200);
+ udelay(100);
}
static bool rtl_pci_get_amd_l1_patch(struct ieee80211_hw *hw)
@@ -330,13 +367,13 @@
u8 capabilityoffset = pcipriv->ndis_adapter.pcibridge_pciehdr_offset;
u32 pcicfg_addrport = pcipriv->ndis_adapter.pcicfg_addrport;
u8 linkctrl_reg;
- u8 num4bBytes;
+ u8 num4bbytes;
- num4bBytes = (capabilityoffset + 0x10) / 4;
+ num4bbytes = (capabilityoffset + 0x10) / 4;
/*Read Link Control Register */
rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
- pcicfg_addrport + (num4bBytes << 2));
+ pcicfg_addrport + (num4bbytes << 2));
rtl_pci_raw_read_port_uchar(PCI_CONF_DATA, &linkctrl_reg);
pcipriv->ndis_adapter.pcibridge_linkctrlreg = linkctrl_reg;
@@ -369,7 +406,7 @@
pci_write_config_byte(pdev, 0x70f, tmp);
}
-static void _rtl_pci_initialize_adapter_common(struct ieee80211_hw *hw)
+static void rtl_pci_init_aspm(struct ieee80211_hw *hw)
{
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
@@ -383,52 +420,6 @@
}
-static void rtl_pci_init_aspm(struct ieee80211_hw *hw)
-{
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-
- /*close ASPM for AMD defaultly */
- rtlpci->const_amdpci_aspm = 0;
-
- /*
- * ASPM PS mode.
- * 0 - Disable ASPM,
- * 1 - Enable ASPM without Clock Req,
- * 2 - Enable ASPM with Clock Req,
- * 3 - Always Enable ASPM with Clock Req,
- * 4 - Always Enable ASPM without Clock Req.
- * set defult to RTL8192CE:3 RTL8192E:2
- * */
- rtlpci->const_pci_aspm = 3;
-
- /*Setting for PCI-E device */
- rtlpci->const_devicepci_aspm_setting = 0x03;
-
- /*Setting for PCI-E bridge */
- rtlpci->const_hostpci_aspm_setting = 0x02;
-
- /*
- * In Hw/Sw Radio Off situation.
- * 0 - Default,
- * 1 - From ASPM setting without low Mac Pwr,
- * 2 - From ASPM setting with low Mac Pwr,
- * 3 - Bus D3
- * set default to RTL8192CE:0 RTL8192SE:2
- */
- rtlpci->const_hwsw_rfoff_d3 = 0;
-
- /*
- * This setting works for those device with
- * backdoor ASPM setting such as EPHY setting.
- * 0 - Not support ASPM,
- * 1 - Support ASPM,
- * 2 - According to chipset.
- */
- rtlpci->const_support_pciaspm = 1;
-
- _rtl_pci_initialize_adapter_common(hw);
-}
-
static void _rtl_pci_io_handler_init(struct device *dev,
struct ieee80211_hw *hw)
{
@@ -450,6 +441,90 @@
{
}
+static bool _rtl_update_earlymode_info(struct ieee80211_hw *hw,
+ struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc, u8 tid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ u8 additionlen = FCS_LEN;
+ struct sk_buff *next_skb;
+
+ /* here open is 4, wep/tkip is 8, aes is 12*/
+ if (info->control.hw_key)
+ additionlen += info->control.hw_key->icv_len;
+
+ /* The most skb num is 6 */
+ tcb_desc->empkt_num = 0;
+ spin_lock_bh(&rtlpriv->locks.waitq_lock);
+ skb_queue_walk(&rtlpriv->mac80211.skb_waitq[tid], next_skb) {
+ struct ieee80211_tx_info *next_info;
+
+ next_info = IEEE80211_SKB_CB(next_skb);
+ if (next_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ tcb_desc->empkt_len[tcb_desc->empkt_num] =
+ next_skb->len + additionlen;
+ tcb_desc->empkt_num++;
+ } else {
+ break;
+ }
+
+ if (skb_queue_is_last(&rtlpriv->mac80211.skb_waitq[tid],
+ next_skb))
+ break;
+
+ if (tcb_desc->empkt_num >= 5)
+ break;
+ }
+ spin_unlock_bh(&rtlpriv->locks.waitq_lock);
+
+ return true;
+}
+
+/* just for early mode now */
+static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct sk_buff *skb = NULL;
+ struct ieee80211_tx_info *info = NULL;
+ int tid; /* should be int */
+
+ if (!rtlpriv->rtlhal.earlymode_enable)
+ return;
+
+ /* we juse use em for BE/BK/VI/VO */
+ for (tid = 7; tid >= 0; tid--) {
+ u8 hw_queue = ac_to_hwq[rtl_tid_to_ac(hw, tid)];
+ struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
+ while (!mac->act_scanning &&
+ rtlpriv->psc.rfpwr_state == ERFON) {
+ struct rtl_tcb_desc tcb_desc;
+ memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
+
+ spin_lock_bh(&rtlpriv->locks.waitq_lock);
+ if (!skb_queue_empty(&mac->skb_waitq[tid]) &&
+ (ring->entries - skb_queue_len(&ring->queue) > 5)) {
+ skb = skb_dequeue(&mac->skb_waitq[tid]);
+ } else {
+ spin_unlock_bh(&rtlpriv->locks.waitq_lock);
+ break;
+ }
+ spin_unlock_bh(&rtlpriv->locks.waitq_lock);
+
+ /* Some macaddr can't do early mode. like
+ * multicast/broadcast/no_qos data */
+ info = IEEE80211_SKB_CB(skb);
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ _rtl_update_earlymode_info(hw, skb,
+ &tcb_desc, tid);
+
+ rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);
+ }
+ }
+}
+
+
static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -461,6 +536,8 @@
struct rtl_tx_desc *entry = &ring->desc[ring->idx];
struct sk_buff *skb;
struct ieee80211_tx_info *info;
+ __le16 fc;
+ u8 tid;
u8 own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) entry, true,
HW_DESC_OWN);
@@ -481,6 +558,10 @@
HW_DESC_TXBUFF_ADDR),
skb->len, PCI_DMA_TODEVICE);
+ /* remove early mode header */
+ if (rtlpriv->rtlhal.earlymode_enable)
+ skb_pull(skb, EM_HDR_LEN);
+
RT_TRACE(rtlpriv, (COMP_INTR | COMP_SEND), DBG_TRACE,
("new ring->idx:%d, "
"free: skb_queue_len:%d, free: seq:%x\n",
@@ -488,6 +569,30 @@
skb_queue_len(&ring->queue),
*(u16 *) (skb->data + 22)));
+ if (prio == TXCMD_QUEUE) {
+ dev_kfree_skb(skb);
+ goto tx_status_ok;
+
+ }
+
+ /* for sw LPS, just after NULL skb send out, we can
+ * sure AP kown we are sleeped, our we should not let
+ * rf to sleep*/
+ fc = rtl_get_fc(skb);
+ if (ieee80211_is_nullfunc(fc)) {
+ if (ieee80211_has_pm(fc)) {
+ rtlpriv->mac80211.offchan_deley = true;
+ rtlpriv->psc.state_inap = 1;
+ } else {
+ rtlpriv->psc.state_inap = 0;
+ }
+ }
+
+ /* update tid tx pkt num */
+ tid = rtl_get_tid(skb);
+ if (tid <= 7)
+ rtlpriv->link_info.tidtx_inperiod[tid]++;
+
info = IEEE80211_SKB_CB(skb);
ieee80211_tx_info_clear_status(info);
@@ -510,7 +615,7 @@
skb_get_queue_mapping
(skb));
}
-
+tx_status_ok:
skb = NULL;
}
@@ -582,23 +687,21 @@
*skb_trim(skb, skb->len - 4);
*/
- hdr = (struct ieee80211_hdr *)(skb->data);
- fc = hdr->frame_control;
+ hdr = rtl_get_hdr(skb);
+ fc = rtl_get_fc(skb);
- if (!stats.crc) {
+ if (!stats.crc || !stats.hwerror) {
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status,
sizeof(rx_status));
- if (is_broadcast_ether_addr(hdr->addr1))
+ if (is_broadcast_ether_addr(hdr->addr1)) {
;/*TODO*/
- else {
- if (is_multicast_ether_addr(hdr->addr1))
- ;/*TODO*/
- else {
- unicast = true;
- rtlpriv->stats.rxbytesunicast +=
- skb->len;
- }
+ } else if (is_multicast_ether_addr(hdr->addr1)) {
+ ;/*TODO*/
+ } else {
+ unicast = true;
+ rtlpriv->stats.rxbytesunicast +=
+ skb->len;
}
rtl_is_special_data(hw, skb, false);
@@ -612,28 +715,38 @@
num_rx_inperiod++;
}
- if (unlikely(!rtl_action_proc(hw, skb,
- false))) {
+ /* for sw lps */
+ rtl_swlps_beacon(hw, (void *)skb->data,
+ skb->len);
+ rtl_recognize_peer(hw, (void *)skb->data,
+ skb->len);
+ if ((rtlpriv->mac80211.opmode ==
+ NL80211_IFTYPE_AP) &&
+ (rtlpriv->rtlhal.current_bandtype ==
+ BAND_ON_2_4G) &&
+ (ieee80211_is_beacon(fc) ||
+ ieee80211_is_probe_resp(fc))) {
dev_kfree_skb_any(skb);
} else {
- struct sk_buff *uskb = NULL;
- u8 *pdata;
- uskb = dev_alloc_skb(skb->len + 128);
- if (!uskb) {
- RT_TRACE(rtlpriv,
- (COMP_INTR | COMP_RECV),
- DBG_EMERG,
- ("can't alloc rx skb\n"));
- goto done;
- }
- memcpy(IEEE80211_SKB_RXCB(uskb),
- &rx_status,
- sizeof(rx_status));
- pdata = (u8 *)skb_put(uskb, skb->len);
- memcpy(pdata, skb->data, skb->len);
- dev_kfree_skb_any(skb);
+ if (unlikely(!rtl_action_proc(hw, skb,
+ false))) {
+ dev_kfree_skb_any(skb);
+ } else {
+ struct sk_buff *uskb = NULL;
+ u8 *pdata;
+ uskb = dev_alloc_skb(skb->len
+ + 128);
+ memcpy(IEEE80211_SKB_RXCB(uskb),
+ &rx_status,
+ sizeof(rx_status));
+ pdata = (u8 *)skb_put(uskb,
+ skb->len);
+ memcpy(pdata, skb->data,
+ skb->len);
+ dev_kfree_skb_any(skb);
- ieee80211_rx_irqsafe(hw, uskb);
+ ieee80211_rx_irqsafe(hw, uskb);
+ }
}
} else {
dev_kfree_skb_any(skb);
@@ -648,7 +761,7 @@
new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
if (unlikely(!new_skb)) {
RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
- DBG_EMERG,
+ DBG_DMESG,
("can't alloc skb for rx\n"));
goto done;
}
@@ -666,7 +779,7 @@
}
done:
- bufferaddress = (u32)(*((dma_addr_t *) skb->cb));
+ bufferaddress = (*((dma_addr_t *)skb->cb));
tmp_one = 1;
rtlpriv->cfg->ops->set_desc((u8 *) pdesc, false,
HW_DESC_RXBUFF_ADDR,
@@ -695,6 +808,7 @@
struct ieee80211_hw *hw = dev_id;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
unsigned long flags;
u32 inta = 0;
u32 intb = 0;
@@ -781,23 +895,36 @@
_rtl_pci_tx_isr(hw, VO_QUEUE);
}
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE) {
+ if (inta & rtlpriv->cfg->maps[RTL_IMR_COMDOK]) {
+ rtlpriv->link_info.num_tx_inperiod++;
+
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+ ("CMD TX OK interrupt!\n"));
+ _rtl_pci_tx_isr(hw, TXCMD_QUEUE);
+ }
+ }
+
/*<2> Rx related */
if (inta & rtlpriv->cfg->maps[RTL_IMR_ROK]) {
RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, ("Rx ok interrupt!\n"));
- tasklet_schedule(&rtlpriv->works.irq_tasklet);
+ _rtl_pci_rx_interrupt(hw);
}
if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_RDU])) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
("rx descriptor unavailable!\n"));
- tasklet_schedule(&rtlpriv->works.irq_tasklet);
+ _rtl_pci_rx_interrupt(hw);
}
if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_RXFOVW])) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, ("rx overflow !\n"));
- tasklet_schedule(&rtlpriv->works.irq_tasklet);
+ _rtl_pci_rx_interrupt(hw);
}
+ if (rtlpriv->rtlhal.earlymode_enable)
+ tasklet_schedule(&rtlpriv->works.irq_tasklet);
+
spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
return IRQ_HANDLED;
@@ -808,7 +935,7 @@
static void _rtl_pci_irq_tasklet(struct ieee80211_hw *hw)
{
- _rtl_pci_rx_interrupt(hw);
+ _rtl_pci_tx_chk_waitq(hw);
}
static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
@@ -816,14 +943,15 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
+ struct rtl8192_tx_ring *ring = NULL;
struct ieee80211_hdr *hdr = NULL;
struct ieee80211_tx_info *info = NULL;
struct sk_buff *pskb = NULL;
struct rtl_tx_desc *pdesc = NULL;
- unsigned int queue_index;
+ struct rtl_tcb_desc tcb_desc;
u8 temp_one = 1;
+ memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
ring = &rtlpci->tx_ring[BEACON_QUEUE];
pskb = __skb_dequeue(&ring->queue);
if (pskb)
@@ -833,14 +961,11 @@
pskb = ieee80211_beacon_get(hw, mac->vif);
if (pskb == NULL)
return;
- hdr = (struct ieee80211_hdr *)(pskb->data);
+ hdr = rtl_get_hdr(pskb);
info = IEEE80211_SKB_CB(pskb);
-
- queue_index = BEACON_QUEUE;
-
pdesc = &ring->desc[0];
rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *) pdesc,
- info, pskb, queue_index);
+ info, pskb, BEACON_QUEUE, &tcb_desc);
__skb_queue_tail(&ring->queue, pskb);
@@ -882,7 +1007,6 @@
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
rtlpci->up_first_time = true;
rtlpci->being_init_adapter = false;
@@ -890,31 +1014,20 @@
rtlhal->hw = hw;
rtlpci->pdev = pdev;
- ppsc->inactiveps = false;
- ppsc->leisure_ps = true;
- ppsc->fwctrl_lps = true;
- ppsc->reg_fwctrl_lps = 3;
- ppsc->reg_max_lps_awakeintvl = 5;
-
- if (ppsc->reg_fwctrl_lps == 1)
- ppsc->fwctrl_psmode = FW_PS_MIN_MODE;
- else if (ppsc->reg_fwctrl_lps == 2)
- ppsc->fwctrl_psmode = FW_PS_MAX_MODE;
- else if (ppsc->reg_fwctrl_lps == 3)
- ppsc->fwctrl_psmode = FW_PS_DTIM_MODE;
-
/*Tx/Rx related var */
_rtl_pci_init_trx_var(hw);
- /*IBSS*/ mac->beacon_interval = 100;
+ /*IBSS*/ mac->beacon_interval = 100;
- /*AMPDU*/ mac->min_space_cfg = 0;
+ /*AMPDU*/
+ mac->min_space_cfg = 0;
mac->max_mss_density = 0;
/*set sane AMPDU defaults */
mac->current_ampdu_density = 7;
mac->current_ampdu_factor = 3;
- /*QOS*/ rtlpci->acm_method = eAcmWay2_SW;
+ /*QOS*/
+ rtlpci->acm_method = eAcmWay2_SW;
/*task */
tasklet_init(&rtlpriv->works.irq_tasklet,
@@ -955,7 +1068,8 @@
("queue:%d, ring_addr:%p\n", prio, ring));
for (i = 0; i < entries; i++) {
- nextdescaddress = (u32) dma + ((i + 1) % entries) *
+ nextdescaddress = (u32) dma +
+ ((i + 1) % entries) *
sizeof(*ring);
rtlpriv->cfg->ops->set_desc((u8 *)&(ring[i]),
@@ -1020,7 +1134,7 @@
rtlpci->rxbuffersize,
PCI_DMA_FROMDEVICE);
- bufferaddress = (u32)(*((dma_addr_t *)skb->cb));
+ bufferaddress = (*((dma_addr_t *)skb->cb));
rtlpriv->cfg->ops->set_desc((u8 *)entry, false,
HW_DESC_RXBUFF_ADDR,
(u8 *)&bufferaddress);
@@ -1203,72 +1317,73 @@
return 0;
}
-static unsigned int _rtl_mac_to_hwqueue(__le16 fc,
- unsigned int mac80211_queue_index)
-{
- unsigned int hw_queue_index;
-
- if (unlikely(ieee80211_is_beacon(fc))) {
- hw_queue_index = BEACON_QUEUE;
- goto out;
- }
-
- if (ieee80211_is_mgmt(fc)) {
- hw_queue_index = MGNT_QUEUE;
- goto out;
- }
-
- switch (mac80211_queue_index) {
- case 0:
- hw_queue_index = VO_QUEUE;
- break;
- case 1:
- hw_queue_index = VI_QUEUE;
- break;
- case 2:
- hw_queue_index = BE_QUEUE;;
- break;
- case 3:
- hw_queue_index = BK_QUEUE;
- break;
- default:
- hw_queue_index = BE_QUEUE;
- RT_ASSERT(false, ("QSLT_BE queue, skb_queue:%d\n",
- mac80211_queue_index));
- break;
- }
-
-out:
- return hw_queue_index;
-}
-
-static int rtl_pci_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+static bool rtl_pci_tx_chk_waitq_insert(struct ieee80211_hw *hw,
+ struct sk_buff *skb)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_sta *sta = info->control.sta;
+ struct rtl_sta_info *sta_entry = NULL;
+ u8 tid = rtl_get_tid(skb);
+
+ if (!sta)
+ return false;
+ sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+
+ if (!rtlpriv->rtlhal.earlymode_enable)
+ return false;
+ if (sta_entry->tids[tid].agg.agg_state != RTL_AGG_OPERATIONAL)
+ return false;
+ if (_rtl_mac_to_hwqueue(hw, skb) > VO_QUEUE)
+ return false;
+ if (tid > 7)
+ return false;
+
+ /* maybe every tid should be checked */
+ if (!rtlpriv->link_info.higher_busytxtraffic[tid])
+ return false;
+
+ spin_lock_bh(&rtlpriv->locks.waitq_lock);
+ skb_queue_tail(&rtlpriv->mac80211.skb_waitq[tid], skb);
+ spin_unlock_bh(&rtlpriv->locks.waitq_lock);
+
+ return true;
+}
+
+static int rtl_pci_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct rtl_tcb_desc *ptcb_desc)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_sta_info *sta_entry = NULL;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_sta *sta = info->control.sta;
struct rtl8192_tx_ring *ring;
struct rtl_tx_desc *pdesc;
u8 idx;
- unsigned int queue_index, hw_queue;
+ u8 hw_queue = _rtl_mac_to_hwqueue(hw, skb);
unsigned long flags;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
- __le16 fc = hdr->frame_control;
+ struct ieee80211_hdr *hdr = rtl_get_hdr(skb);
+ __le16 fc = rtl_get_fc(skb);
u8 *pda_addr = hdr->addr1;
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*ssn */
- u8 *qc = NULL;
u8 tid = 0;
u16 seq_number = 0;
u8 own;
u8 temp_one = 1;
- if (ieee80211_is_mgmt(fc))
- rtl_tx_mgmt_proc(hw, skb);
- rtl_action_proc(hw, skb, true);
+ if (ieee80211_is_auth(fc)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
+ rtl_ips_nic_on(hw);
+ }
- queue_index = skb_get_queue_mapping(skb);
- hw_queue = _rtl_mac_to_hwqueue(fc, queue_index);
+ if (rtlpriv->psc.sw_ps_enabled) {
+ if (ieee80211_is_data(fc) && !ieee80211_is_nullfunc(fc) &&
+ !ieee80211_has_pm(fc))
+ hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+ }
+
+ rtl_action_proc(hw, skb, true);
if (is_multicast_ether_addr(pda_addr))
rtlpriv->stats.txbytesmulticast += skb->len;
@@ -1278,7 +1393,6 @@
rtlpriv->stats.txbytesunicast += skb->len;
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
-
ring = &rtlpci->tx_ring[hw_queue];
if (hw_queue != BEACON_QUEUE)
idx = (ring->idx + skb_queue_len(&ring->queue)) %
@@ -1301,43 +1415,30 @@
return skb->len;
}
- /*
- *if(ieee80211_is_nullfunc(fc)) {
- * spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
- * return 1;
- *}
- */
-
if (ieee80211_is_data_qos(fc)) {
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ tid = rtl_get_tid(skb);
+ if (sta) {
+ sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+ seq_number = (le16_to_cpu(hdr->seq_ctrl) &
+ IEEE80211_SCTL_SEQ) >> 4;
+ seq_number += 1;
- seq_number = mac->tids[tid].seq_number;
- seq_number &= IEEE80211_SCTL_SEQ;
- /*
- *hdr->seq_ctrl = hdr->seq_ctrl &
- *cpu_to_le16(IEEE80211_SCTL_FRAG);
- *hdr->seq_ctrl |= cpu_to_le16(seq_number);
- */
-
- seq_number += 1;
+ if (!ieee80211_has_morefrags(hdr->frame_control))
+ sta_entry->tids[tid].seq_number = seq_number;
+ }
}
if (ieee80211_is_data(fc))
rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX);
- rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *) pdesc,
- info, skb, hw_queue);
+ rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc,
+ info, skb, hw_queue, ptcb_desc);
__skb_queue_tail(&ring->queue, skb);
- rtlpriv->cfg->ops->set_desc((u8 *) pdesc, true,
+ rtlpriv->cfg->ops->set_desc((u8 *)pdesc, true,
HW_DESC_OWN, (u8 *)&temp_one);
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- if (qc)
- mac->tids[tid].seq_number = seq_number;
- }
if ((ring->entries - skb_queue_len(&ring->queue)) < 2 &&
hw_queue != BEACON_QUEUE) {
@@ -1359,6 +1460,35 @@
return 0;
}
+static void rtl_pci_flush(struct ieee80211_hw *hw, bool drop)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u16 i = 0;
+ int queue_id;
+ struct rtl8192_tx_ring *ring;
+
+ for (queue_id = RTL_PCI_MAX_TX_QUEUE_COUNT - 1; queue_id >= 0;) {
+ u32 queue_len;
+ ring = &pcipriv->dev.tx_ring[queue_id];
+ queue_len = skb_queue_len(&ring->queue);
+ if (queue_len == 0 || queue_id == BEACON_QUEUE ||
+ queue_id == TXCMD_QUEUE) {
+ queue_id--;
+ continue;
+ } else {
+ msleep(20);
+ i++;
+ }
+
+ /* we just wait 1s for all queues */
+ if (rtlpriv->psc.rfpwr_state == ERFOFF ||
+ is_hal_stop(rtlhal) || i >= 200)
+ return;
+ }
+}
+
static void rtl_pci_deinit(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1477,11 +1607,14 @@
struct pci_dev *bridge_pdev = pdev->bus->self;
u16 venderid;
u16 deviceid;
+ u8 revisionid;
u16 irqline;
u8 tmp;
+ pcipriv->ndis_adapter.pcibridge_vendor = PCI_BRIDGE_VENDOR_UNKNOWN;
venderid = pdev->vendor;
deviceid = pdev->device;
+ pci_read_config_byte(pdev, 0x8, &revisionid);
pci_read_config_word(pdev, 0x3C, &irqline);
if (deviceid == RTL_PCI_8192_DID ||
@@ -1492,7 +1625,7 @@
deviceid == RTL_PCI_8173_DID ||
deviceid == RTL_PCI_8172_DID ||
deviceid == RTL_PCI_8171_DID) {
- switch (pdev->revision) {
+ switch (revisionid) {
case RTL_PCI_REVISION_ID_8192PCIE:
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
("8192 PCI-E is found - "
@@ -1521,6 +1654,12 @@
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
("8192C PCI-E is found - "
"vid/did=%x/%x\n", venderid, deviceid));
+ } else if (deviceid == RTL_PCI_8192DE_DID ||
+ deviceid == RTL_PCI_8192DE_DID2) {
+ rtlhal->hw_type = HARDWARE_TYPE_RTL8192DE;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+ ("8192D PCI-E is found - "
+ "vid/did=%x/%x\n", venderid, deviceid));
} else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
("Err: Unknown device -"
@@ -1529,6 +1668,25 @@
rtlhal->hw_type = RTL_DEFAULT_HARDWARE_TYPE;
}
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192DE) {
+ if (revisionid == 0 || revisionid == 1) {
+ if (revisionid == 0) {
+ RT_TRACE(rtlpriv, COMP_INIT,
+ DBG_LOUD, ("Find 92DE MAC0.\n"));
+ rtlhal->interfaceindex = 0;
+ } else if (revisionid == 1) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Find 92DE MAC1.\n"));
+ rtlhal->interfaceindex = 1;
+ }
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Unknown device - "
+ "VendorID/DeviceID=%x/%x, Revision=%x\n",
+ venderid, deviceid, revisionid));
+ rtlhal->interfaceindex = 0;
+ }
+ }
/*find bus info */
pcipriv->ndis_adapter.busnumber = pdev->bus->number;
pcipriv->ndis_adapter.devnumber = PCI_SLOT(pdev->devfn);
@@ -1554,12 +1712,12 @@
PCI_SLOT(bridge_pdev->devfn);
pcipriv->ndis_adapter.pcibridge_funcnum =
PCI_FUNC(bridge_pdev->devfn);
- pcipriv->ndis_adapter.pcibridge_pciehdr_offset =
- pci_pcie_cap(bridge_pdev);
pcipriv->ndis_adapter.pcicfg_addrport =
(pcipriv->ndis_adapter.pcibridge_busnum << 16) |
(pcipriv->ndis_adapter.pcibridge_devnum << 11) |
(pcipriv->ndis_adapter.pcibridge_funcnum << 8) | (1 << 31);
+ pcipriv->ndis_adapter.pcibridge_pciehdr_offset =
+ pci_pcie_cap(bridge_pdev);
pcipriv->ndis_adapter.num4bytes =
(pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10) / 4;
@@ -1642,6 +1800,11 @@
pcipriv = (void *)rtlpriv->priv;
pcipriv->dev.pdev = pdev;
+ /* init cfg & intf_ops */
+ rtlpriv->rtlhal.interface = INTF_PCI;
+ rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
+ rtlpriv->intf_ops = &rtl_pci_ops;
+
/*
*init dbgp flags before all
*other functions, because we will
@@ -1659,13 +1822,14 @@
return err;
}
- pmem_start = pci_resource_start(pdev, 2);
- pmem_len = pci_resource_len(pdev, 2);
- pmem_flags = pci_resource_flags(pdev, 2);
+ pmem_start = pci_resource_start(pdev, rtlpriv->cfg->bar_id);
+ pmem_len = pci_resource_len(pdev, rtlpriv->cfg->bar_id);
+ pmem_flags = pci_resource_flags(pdev, rtlpriv->cfg->bar_id);
/*shared mem start */
rtlpriv->io.pci_mem_start =
- (unsigned long)pci_iomap(pdev, 2, pmem_len);
+ (unsigned long)pci_iomap(pdev,
+ rtlpriv->cfg->bar_id, pmem_len);
if (rtlpriv->io.pci_mem_start == 0) {
RT_ASSERT(false, ("Can't map PCI mem\n"));
goto fail2;
@@ -1684,11 +1848,6 @@
pci_write_config_byte(pdev, 0x04, 0x06);
pci_write_config_byte(pdev, 0x04, 0x07);
- /* init cfg & intf_ops */
- rtlpriv->rtlhal.interface = INTF_PCI;
- rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
- rtlpriv->intf_ops = &rtl_pci_ops;
-
/* find adapter */
_rtl_pci_find_adapter(pdev, hw);
@@ -1806,7 +1965,6 @@
rtl_pci_deinit(hw);
rtl_deinit_core(hw);
- rtlpriv->cfg->ops->deinit_sw_leds(hw);
_rtl_pci_io_handler_release(hw);
rtlpriv->cfg->ops->deinit_sw_vars(hw);
@@ -1821,6 +1979,9 @@
}
pci_disable_device(pdev);
+
+ rtl_pci_disable_aspm(hw);
+
pci_set_drvdata(pdev, NULL);
ieee80211_free_hw(hw);
@@ -1844,10 +2005,15 @@
****************************************/
int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->cfg->ops->hw_suspend(hw);
+ rtl_deinit_rfkill(hw);
+
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
-
return 0;
}
EXPORT_SYMBOL(rtl_pci_suspend);
@@ -1855,6 +2021,8 @@
int rtl_pci_resume(struct pci_dev *pdev)
{
int ret;
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_device(pdev);
@@ -1865,15 +2033,20 @@
pci_restore_state(pdev);
+ rtlpriv->cfg->ops->hw_resume(hw);
+ rtl_init_rfkill(hw);
return 0;
}
EXPORT_SYMBOL(rtl_pci_resume);
struct rtl_intf_ops rtl_pci_ops = {
+ .read_efuse_byte = read_efuse_byte,
.adapter_start = rtl_pci_start,
.adapter_stop = rtl_pci_stop,
.adapter_tx = rtl_pci_tx,
+ .flush = rtl_pci_flush,
.reset_trx_ring = rtl_pci_reset_trx_ring,
+ .waitq_insert = rtl_pci_tx_chk_waitq_insert,
.disable_aspm = rtl_pci_disable_aspm,
.enable_aspm = rtl_pci_enable_aspm,
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index 0caa814..671b1f5 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -102,8 +102,8 @@
#define RTL_PCI_8191CE_DID 0x8177 /*8192ce */
#define RTL_PCI_8188CE_DID 0x8176 /*8192ce */
#define RTL_PCI_8192CU_DID 0x8191 /*8192ce */
-#define RTL_PCI_8192DE_DID 0x092D /*8192ce */
-#define RTL_PCI_8192DU_DID 0x092D /*8192ce */
+#define RTL_PCI_8192DE_DID 0x8193 /*8192de */
+#define RTL_PCI_8192DE_DID2 0x002B /*92DE*/
/*8192 support 16 pages of IO registers*/
#define RTL_MEM_MAPPED_IO_RANGE_8190PCI 0x1000
@@ -129,6 +129,11 @@
PCI_BRIDGE_VENDOR_MAX,
};
+struct rtl_pci_capabilities_header {
+ u8 capability_id;
+ u8 next;
+};
+
struct rtl_rx_desc {
u32 dword[8];
} __packed;
@@ -161,7 +166,9 @@
bool driver_is_goingto_unload;
bool up_first_time;
+ bool first_init;
bool being_init_adapter;
+ bool init_ready;
bool irq_enabled;
/*Tx */
@@ -192,11 +199,14 @@
u8 const_devicepci_aspm_setting;
/*If it supports ASPM, Offset[560h] = 0x40,
otherwise Offset[560h] = 0x00. */
- bool b_support_aspm;
- bool b_support_backdoor;
+ bool support_aspm;
+ bool support_backdoor;
/*QOS & EDCA */
enum acm_method acm_method;
+
+ u16 shortretry_limit;
+ u16 longretry_limit;
};
struct mp_adapter {
@@ -227,6 +237,7 @@
struct rtl_pci dev;
struct mp_adapter ndis_adapter;
struct rtl_led_ctl ledctl;
+ struct bt_coexist_info bt_coexist;
};
#define rtl_pcipriv(hw) (((struct rtl_pci_priv *)(rtl_priv(hw))->priv))
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
index 6b7e217..2bb7119 100644
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -36,7 +36,6 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- bool init_status = true;
/*<1> reset trx ring */
if (rtlhal->interface == INTF_PCI)
@@ -49,7 +48,6 @@
/*<2> Enable Adapter */
rtlpriv->cfg->ops->hw_init(hw);
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
- /*init_status = false; */
/*<3> Enable Interrupt */
rtlpriv->cfg->ops->enable_interrupt(hw);
@@ -57,13 +55,12 @@
/*<enable timer> */
rtl_watch_dog_timer_callback((unsigned long)hw);
- return init_status;
+ return true;
}
EXPORT_SYMBOL(rtl_ps_enable_nic);
bool rtl_ps_disable_nic(struct ieee80211_hw *hw)
{
- bool status = true;
struct rtl_priv *rtlpriv = rtl_priv(hw);
/*<1> Stop all timer */
@@ -75,7 +72,7 @@
/*<3> Disable Adapter */
rtlpriv->cfg->ops->hw_disable(hw);
- return status;
+ return true;
}
EXPORT_SYMBOL(rtl_ps_disable_nic);
@@ -193,12 +190,13 @@
ppsc->swrf_processing = true;
- if (ppsc->inactive_pwrstate == ERFON && rtlhal->interface == INTF_PCI) {
+ if (ppsc->inactive_pwrstate == ERFOFF &&
+ rtlhal->interface == INTF_PCI) {
if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
- RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM) &&
+ RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
rtlhal->interface == INTF_PCI) {
rtlpriv->intf_ops->disable_aspm(hw);
- RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+ RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
}
}
@@ -207,9 +205,10 @@
if (ppsc->inactive_pwrstate == ERFOFF &&
rtlhal->interface == INTF_PCI) {
- if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
+ !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
rtlpriv->intf_ops->enable_aspm(hw);
- RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+ RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
}
}
@@ -233,6 +232,9 @@
return;
}
+ if (mac->link_state > MAC80211_NOLINK)
+ return;
+
if (is_hal_stop(rtlhal))
return;
@@ -284,10 +286,14 @@
void rtl_ips_nic_on(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
enum rf_pwrstate rtstate;
unsigned long flags;
+ if (mac->opmode != NL80211_IFTYPE_STATION)
+ return;
+
spin_lock_irqsave(&rtlpriv->locks.ips_lock, flags);
if (ppsc->inactiveps) {
@@ -370,8 +376,7 @@
* mode and set RPWM to turn RF on.
*/
- if ((ppsc->fwctrl_lps) && (ppsc->leisure_ps) &&
- ppsc->report_linked) {
+ if ((ppsc->fwctrl_lps) && ppsc->report_linked) {
bool fw_current_inps;
if (ppsc->dot11_psmode == EACTIVE) {
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
@@ -425,7 +430,7 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
unsigned long flag;
- if (!(ppsc->fwctrl_lps && ppsc->leisure_ps))
+ if (!ppsc->fwctrl_lps)
return;
if (rtlpriv->sec.being_setkey)
@@ -446,17 +451,16 @@
spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
- if (ppsc->leisure_ps) {
- /* Idle for a while if we connect to AP a while ago. */
- if (mac->cnt_after_linked >= 2) {
- if (ppsc->dot11_psmode == EACTIVE) {
- RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ /* Idle for a while if we connect to AP a while ago. */
+ if (mac->cnt_after_linked >= 2) {
+ if (ppsc->dot11_psmode == EACTIVE) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
("Enter 802.11 power save mode...\n"));
- rtl_lps_set_psmode(hw, EAUTOPS);
- }
+ rtl_lps_set_psmode(hw, EAUTOPS);
}
}
+
spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
}
@@ -470,17 +474,17 @@
spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
- if (ppsc->fwctrl_lps && ppsc->leisure_ps) {
+ if (ppsc->fwctrl_lps) {
if (ppsc->dot11_psmode != EACTIVE) {
/*FIX ME */
rtlpriv->cfg->ops->enable_interrupt(hw);
if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
- RT_IN_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM) &&
+ RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
rtlhal->interface == INTF_PCI) {
rtlpriv->intf_ops->disable_aspm(hw);
- RT_CLEAR_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM);
+ RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
}
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
@@ -491,3 +495,214 @@
}
spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
}
+
+/* For sw LPS*/
+void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct ieee80211_hdr *hdr = (void *) data;
+ struct ieee80211_tim_ie *tim_ie;
+ u8 *tim;
+ u8 tim_len;
+ bool u_buffed;
+ bool m_buffed;
+
+ if (mac->opmode != NL80211_IFTYPE_STATION)
+ return;
+
+ if (!rtlpriv->psc.swctrl_lps)
+ return;
+
+ if (rtlpriv->mac80211.link_state != MAC80211_LINKED)
+ return;
+
+ if (!rtlpriv->psc.sw_ps_enabled)
+ return;
+
+ if (rtlpriv->psc.fwctrl_lps)
+ return;
+
+ if (likely(!(hw->conf.flags & IEEE80211_CONF_PS)))
+ return;
+
+ /* check if this really is a beacon */
+ if (!ieee80211_is_beacon(hdr->frame_control))
+ return;
+
+ /* min. beacon length + FCS_LEN */
+ if (len <= 40 + FCS_LEN)
+ return;
+
+ /* and only beacons from the associated BSSID, please */
+ if (compare_ether_addr(hdr->addr3, rtlpriv->mac80211.bssid))
+ return;
+
+ rtlpriv->psc.last_beacon = jiffies;
+
+ tim = rtl_find_ie(data, len - FCS_LEN, WLAN_EID_TIM);
+ if (!tim)
+ return;
+
+ if (tim[1] < sizeof(*tim_ie))
+ return;
+
+ tim_len = tim[1];
+ tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+ if (!WARN_ON_ONCE(!hw->conf.ps_dtim_period))
+ rtlpriv->psc.dtim_counter = tim_ie->dtim_count;
+
+ /* Check whenever the PHY can be turned off again. */
+
+ /* 1. What about buffered unicast traffic for our AID? */
+ u_buffed = ieee80211_check_tim(tim_ie, tim_len,
+ rtlpriv->mac80211.assoc_id);
+
+ /* 2. Maybe the AP wants to send multicast/broadcast data? */
+ m_buffed = tim_ie->bitmap_ctrl & 0x01;
+ rtlpriv->psc.multi_buffered = m_buffed;
+
+ /* unicast will process by mac80211 through
+ * set ~IEEE80211_CONF_PS, So we just check
+ * multicast frames here */
+ if (!m_buffed) {
+ /* back to low-power land. and delay is
+ * prevent null power save frame tx fail */
+ queue_delayed_work(rtlpriv->works.rtl_wq,
+ &rtlpriv->works.ps_work, MSECS(5));
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, ("u_bufferd: %x, "
+ "m_buffered: %x\n", u_buffed, m_buffed));
+ }
+}
+
+void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ unsigned long flag;
+
+ if (!rtlpriv->psc.swctrl_lps)
+ return;
+ if (mac->link_state != MAC80211_LINKED)
+ return;
+
+ if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
+ RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
+ rtlpriv->intf_ops->disable_aspm(hw);
+ RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+ }
+
+ spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+ rtl_ps_set_rf_state(hw, ERFON, RF_CHANGE_BY_PS, false);
+ spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}
+
+void rtl_swlps_rfon_wq_callback(void *data)
+{
+ struct rtl_works *rtlworks =
+ container_of_dwork_rtl(data, struct rtl_works, ps_rfon_wq);
+ struct ieee80211_hw *hw = rtlworks->hw;
+
+ rtl_swlps_rf_awake(hw);
+}
+
+void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ unsigned long flag;
+ u8 sleep_intv;
+
+ if (!rtlpriv->psc.sw_ps_enabled)
+ return;
+
+ if ((rtlpriv->sec.being_setkey) ||
+ (mac->opmode == NL80211_IFTYPE_ADHOC))
+ return;
+
+ /*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
+ if ((mac->link_state != MAC80211_LINKED) || (mac->cnt_after_linked < 5))
+ return;
+
+ if (rtlpriv->link_info.busytraffic)
+ return;
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ if (rtlpriv->psc.rfchange_inprogress) {
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ return;
+ }
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+ spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+ rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS, false);
+ spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
+ !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
+ rtlpriv->intf_ops->enable_aspm(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+ }
+
+ /* here is power save alg, when this beacon is DTIM
+ * we will set sleep time to dtim_period * n;
+ * when this beacon is not DTIM, we will set sleep
+ * time to sleep_intv = rtlpriv->psc.dtim_counter or
+ * MAX_SW_LPS_SLEEP_INTV(default set to 5) */
+
+ if (rtlpriv->psc.dtim_counter == 0) {
+ if (hw->conf.ps_dtim_period == 1)
+ sleep_intv = hw->conf.ps_dtim_period * 2;
+ else
+ sleep_intv = hw->conf.ps_dtim_period;
+ } else {
+ sleep_intv = rtlpriv->psc.dtim_counter;
+ }
+
+ if (sleep_intv > MAX_SW_LPS_SLEEP_INTV)
+ sleep_intv = MAX_SW_LPS_SLEEP_INTV;
+
+ /* this print should always be dtim_conter = 0 &
+ * sleep = dtim_period, that meaons, we should
+ * awake before every dtim */
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("dtim_counter:%x will sleep :%d"
+ " beacon_intv\n", rtlpriv->psc.dtim_counter, sleep_intv));
+
+ /* we tested that 40ms is enough for sw & hw sw delay */
+ queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.ps_rfon_wq,
+ MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
+}
+
+
+void rtl_swlps_wq_callback(void *data)
+{
+ struct rtl_works *rtlworks = container_of_dwork_rtl(data,
+ struct rtl_works,
+ ps_work);
+ struct ieee80211_hw *hw = rtlworks->hw;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ bool ps = false;
+
+ ps = (hw->conf.flags & IEEE80211_CONF_PS);
+
+ /* we can sleep after ps null send ok */
+ if (rtlpriv->psc.state_inap) {
+ rtl_swlps_rf_sleep(hw);
+
+ if (rtlpriv->psc.state && !ps) {
+ rtlpriv->psc.sleep_ms = jiffies_to_msecs(jiffies -
+ rtlpriv->psc.last_action);
+ }
+
+ if (ps)
+ rtlpriv->psc.last_slept = jiffies;
+
+ rtlpriv->psc.last_action = jiffies;
+ rtlpriv->psc.state = ps;
+ }
+}
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
index ae56da8..e3bf898 100644
--- a/drivers/net/wireless/rtlwifi/ps.h
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -30,6 +30,8 @@
#ifndef __REALTEK_RTL_PCI_PS_H__
#define __REALTEK_RTL_PCI_PS_H__
+#define MAX_SW_LPS_SLEEP_INTV 5
+
bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
enum rf_pwrstate state_toset, u32 changesource,
bool protect_or_not);
@@ -40,4 +42,11 @@
void rtl_ips_nic_off_wq_callback(void *data);
void rtl_lps_enter(struct ieee80211_hw *hw);
void rtl_lps_leave(struct ieee80211_hw *hw);
+
+void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len);
+void rtl_swlps_wq_callback(void *data);
+void rtl_swlps_rfon_wq_callback(void *data);
+void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
+void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
+
#endif
diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c
index 9163410..30da68a 100644
--- a/drivers/net/wireless/rtlwifi/rc.c
+++ b/drivers/net/wireless/rtlwifi/rc.c
@@ -38,17 +38,14 @@
*CCK11M or OFDM_54M based on wireless mode.
*/
static u8 _rtl_rc_get_highest_rix(struct rtl_priv *rtlpriv,
+ struct ieee80211_sta *sta,
struct sk_buff *skb, bool not_data)
{
struct rtl_mac *rtlmac = rtl_mac(rtlpriv);
-
- /*
- *mgt use 1M, although we have check it
- *before this function use rate_control_send_low,
- *we still check it here
- */
- if (not_data)
- return rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+ struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_sta_info *sta_entry = NULL;
+ u8 wireless_mode = 0;
/*
*this rate is no use for true rate, firmware
@@ -57,35 +54,78 @@
*2.in rtl_get_tcb_desc when we check rate is
* 1M we will not use FW rate but user rate.
*/
- if (rtl_is_special_data(rtlpriv->mac80211.hw, skb, true)) {
- return rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+ if (rtlmac->opmode == NL80211_IFTYPE_AP ||
+ rtlmac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (sta) {
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wireless_mode = sta_entry->wireless_mode;
+ } else {
+ return 0;
+ }
} else {
- if (rtlmac->mode == WIRELESS_MODE_B)
- return rtlpriv->cfg->maps[RTL_RC_CCK_RATE11M];
- else
- return rtlpriv->cfg->maps[RTL_RC_OFDM_RATE54M];
+ wireless_mode = rtlmac->mode;
+ }
+
+ if (rtl_is_special_data(rtlpriv->mac80211.hw, skb, true) ||
+ not_data) {
+ return 0;
+ } else {
+ if (rtlhal->current_bandtype == BAND_ON_2_4G) {
+ if (wireless_mode == WIRELESS_MODE_B) {
+ return B_MODE_MAX_RIX;
+ } else if (wireless_mode == WIRELESS_MODE_G) {
+ return G_MODE_MAX_RIX;
+ } else {
+ if (get_rf_type(rtlphy) != RF_2T2R)
+ return N_MODE_MCS7_RIX;
+ else
+ return N_MODE_MCS15_RIX;
+ }
+ } else {
+ if (wireless_mode == WIRELESS_MODE_A) {
+ return A_MODE_MAX_RIX;
+ } else {
+ if (get_rf_type(rtlphy) != RF_2T2R)
+ return N_MODE_MCS7_RIX;
+ else
+ return N_MODE_MCS15_RIX;
+ }
+ }
}
}
static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
+ struct ieee80211_sta *sta,
struct ieee80211_tx_rate *rate,
struct ieee80211_tx_rate_control *txrc,
- u8 tries, u8 rix, int rtsctsenable,
+ u8 tries, char rix, int rtsctsenable,
bool not_data)
{
struct rtl_mac *mac = rtl_mac(rtlpriv);
+ u8 sgi_20 = 0, sgi_40 = 0;
+ if (sta) {
+ sgi_20 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20;
+ sgi_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40;
+ }
rate->count = tries;
- rate->idx = (rix > 0x2) ? rix : 0x2;
+ rate->idx = rix >= 0x00 ? rix : 0x00;
if (!not_data) {
if (txrc->short_preamble)
rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
- if (mac->bw_40)
- rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
- if (mac->sgi_20 || mac->sgi_40)
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (sta && (sta->ht_cap.cap &
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+ rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ } else {
+ if (mac->bw_40)
+ rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ }
+ if (sgi_20 || sgi_40)
rate->flags |= IEEE80211_TX_RC_SHORT_GI;
- if (mac->ht_enable)
+ if (sta && sta->ht_cap.ht_supported)
rate->flags |= IEEE80211_TX_RC_MCS;
}
}
@@ -97,39 +137,39 @@
struct sk_buff *skb = txrc->skb;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_tx_rate *rates = tx_info->control.rates;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- __le16 fc = hdr->frame_control;
+ __le16 fc = rtl_get_fc(skb);
u8 try_per_rate, i, rix;
bool not_data = !ieee80211_is_data(fc);
if (rate_control_send_low(sta, priv_sta, txrc))
return;
- rix = _rtl_rc_get_highest_rix(rtlpriv, skb, not_data);
-
+ rix = _rtl_rc_get_highest_rix(rtlpriv, sta, skb, not_data);
try_per_rate = 1;
- _rtl_rc_rate_set_series(rtlpriv, &rates[0], txrc,
+ _rtl_rc_rate_set_series(rtlpriv, sta, &rates[0], txrc,
try_per_rate, rix, 1, not_data);
if (!not_data) {
for (i = 1; i < 4; i++)
- _rtl_rc_rate_set_series(rtlpriv, &rates[i],
+ _rtl_rc_rate_set_series(rtlpriv, sta, &rates[i],
txrc, i, (rix - i), 1,
not_data);
}
}
-static bool _rtl_tx_aggr_check(struct rtl_priv *rtlpriv, u16 tid)
+static bool _rtl_tx_aggr_check(struct rtl_priv *rtlpriv,
+ struct rtl_sta_info *sta_entry, u16 tid)
{
struct rtl_mac *mac = rtl_mac(rtlpriv);
if (mac->act_scanning)
return false;
- if (mac->cnt_after_linked < 3)
+ if (mac->opmode == NL80211_IFTYPE_STATION &&
+ mac->cnt_after_linked < 3)
return false;
- if (mac->tids[tid].agg.agg_state == RTL_AGG_OFF)
+ if (sta_entry->tids[tid].agg.agg_state == RTL_AGG_STOP)
return true;
return false;
@@ -143,11 +183,9 @@
{
struct rtl_priv *rtlpriv = ppriv;
struct rtl_mac *mac = rtl_mac(rtlpriv);
- struct ieee80211_hdr *hdr;
- __le16 fc;
-
- hdr = (struct ieee80211_hdr *)skb->data;
- fc = hdr->frame_control;
+ struct ieee80211_hdr *hdr = rtl_get_hdr(skb);
+ __le16 fc = rtl_get_fc(skb);
+ struct rtl_sta_info *sta_entry;
if (!priv_sta || !ieee80211_is_data(fc))
return;
@@ -159,17 +197,21 @@
|| is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
return;
- /* Check if aggregation has to be enabled for this tid */
- if (conf_is_ht(&mac->hw->conf) &&
- !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc, tid;
-
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
-
- if (_rtl_tx_aggr_check(rtlpriv, tid))
- ieee80211_start_tx_ba_session(sta, tid, 5000);
+ if (sta) {
+ /* Check if aggregation has to be enabled for this tid */
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ if ((sta->ht_cap.ht_supported == true) &&
+ !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
+ if (ieee80211_is_data_qos(fc)) {
+ u8 tid = rtl_get_tid(skb);
+ if (_rtl_tx_aggr_check(rtlpriv, sta_entry,
+ tid)) {
+ sta_entry->tids[tid].agg.agg_state =
+ RTL_AGG_PROGRESS;
+ ieee80211_start_tx_ba_session(sta,
+ tid, 5000);
+ }
+ }
}
}
}
@@ -178,43 +220,6 @@
struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta)
{
- struct rtl_priv *rtlpriv = ppriv;
- struct rtl_mac *mac = rtl_mac(rtlpriv);
- u8 is_ht = conf_is_ht(&mac->hw->conf);
-
- if ((mac->opmode == NL80211_IFTYPE_STATION) ||
- (mac->opmode == NL80211_IFTYPE_MESH_POINT) ||
- (mac->opmode == NL80211_IFTYPE_ADHOC)) {
-
- switch (sband->band) {
- case IEEE80211_BAND_2GHZ:
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_G;
- if (is_ht)
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_NGB;
- break;
- case IEEE80211_BAND_5GHZ:
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_A;
- if (is_ht)
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_NGB;
- break;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- ("Invalid band\n"));
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_NGB;
- break;
- }
-
- RT_TRACE(rtlpriv, COMP_RATE, DBG_DMESG,
- ("Choosing rate table index: %d\n",
- rtlpriv->rate_priv->cur_ratetab_idx));
-
- }
-
}
static void rtl_rate_update(void *ppriv,
@@ -223,49 +228,6 @@
u32 changed,
enum nl80211_channel_type oper_chan_type)
{
- struct rtl_priv *rtlpriv = ppriv;
- struct rtl_mac *mac = rtl_mac(rtlpriv);
- struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
- bool oper_cw40 = false, oper_sgi40;
- bool local_cw40 = mac->bw_40;
- bool local_sgi40 = mac->sgi_40;
- u8 is_ht = conf_is_ht(&mac->hw->conf);
-
- if (changed & IEEE80211_RC_HT_CHANGED) {
- if (mac->opmode != NL80211_IFTYPE_STATION)
- return;
-
- if (rtlhal->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
- rtlhal->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
- oper_cw40 = true;
-
- oper_sgi40 = mac->sgi_40;
-
- if ((local_cw40 != oper_cw40) || (local_sgi40 != oper_sgi40)) {
- switch (sband->band) {
- case IEEE80211_BAND_2GHZ:
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_G;
- if (is_ht)
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_NGB;
- break;
- case IEEE80211_BAND_5GHZ:
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_A;
- if (is_ht)
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_NGB;
- break;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- ("Invalid band\n"));
- rtlpriv->rate_priv->cur_ratetab_idx =
- RATR_INX_WIRELESS_NGB;
- break;
- }
- }
- }
}
static void *rtl_rate_alloc(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rtlwifi/rc.h b/drivers/net/wireless/rtlwifi/rc.h
index b4667c0..4afa2c2 100644
--- a/drivers/net/wireless/rtlwifi/rc.h
+++ b/drivers/net/wireless/rtlwifi/rc.h
@@ -30,8 +30,15 @@
#ifndef __RTL_RC_H__
#define __RTL_RC_H__
+#define B_MODE_MAX_RIX 3
+#define G_MODE_MAX_RIX 11
+#define A_MODE_MAX_RIX 7
+
+/* in mac80211 mcs0-mcs15 is idx0-idx15*/
+#define N_MODE_MCS7_RIX 7
+#define N_MODE_MCS15_RIX 15
+
struct rtl_rate_priv {
- u8 cur_ratetab_idx;
u8 ht_cap;
};
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index d26f957..8f6718f 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -66,31 +66,83 @@
NL80211_RRF_PASSIVE_SCAN | \
NL80211_RRF_NO_OFDM)
+/* 5G chan 36 - chan 64*/
+#define RTL819x_5GHZ_5150_5350 \
+ REG_RULE(5150-10, 5350+10, 40, 0, 30, \
+ NL80211_RRF_PASSIVE_SCAN | \
+ NL80211_RRF_NO_IBSS)
+
+/* 5G chan 100 - chan 165*/
+#define RTL819x_5GHZ_5470_5850 \
+ REG_RULE(5470-10, 5850+10, 40, 0, 30, \
+ NL80211_RRF_PASSIVE_SCAN | \
+ NL80211_RRF_NO_IBSS)
+
+/* 5G chan 149 - chan 165*/
+#define RTL819x_5GHZ_5725_5850 \
+ REG_RULE(5725-10, 5850+10, 40, 0, 30, \
+ NL80211_RRF_PASSIVE_SCAN | \
+ NL80211_RRF_NO_IBSS)
+
+#define RTL819x_5GHZ_ALL \
+ (RTL819x_5GHZ_5150_5350, RTL819x_5GHZ_5470_5850)
+
static const struct ieee80211_regdomain rtl_regdom_11 = {
.n_reg_rules = 1,
.alpha2 = "99",
.reg_rules = {
RTL819x_2GHZ_CH01_11,
- }
+ }
};
-static const struct ieee80211_regdomain rtl_regdom_global = {
- .n_reg_rules = 3,
- .alpha2 = "99",
- .reg_rules = {
- RTL819x_2GHZ_CH01_11,
- RTL819x_2GHZ_CH12_13,
- RTL819x_2GHZ_CH14,
- }
-};
-
-static const struct ieee80211_regdomain rtl_regdom_world = {
+static const struct ieee80211_regdomain rtl_regdom_12_13 = {
.n_reg_rules = 2,
.alpha2 = "99",
.reg_rules = {
RTL819x_2GHZ_CH01_11,
- RTL819x_2GHZ_CH12_13,
- }
+ RTL819x_2GHZ_CH12_13,
+ }
+};
+
+static const struct ieee80211_regdomain rtl_regdom_no_midband = {
+ .n_reg_rules = 3,
+ .alpha2 = "99",
+ .reg_rules = {
+ RTL819x_2GHZ_CH01_11,
+ RTL819x_5GHZ_5150_5350,
+ RTL819x_5GHZ_5725_5850,
+ }
+};
+
+static const struct ieee80211_regdomain rtl_regdom_60_64 = {
+ .n_reg_rules = 3,
+ .alpha2 = "99",
+ .reg_rules = {
+ RTL819x_2GHZ_CH01_11,
+ RTL819x_2GHZ_CH12_13,
+ RTL819x_5GHZ_5725_5850,
+ }
+};
+
+static const struct ieee80211_regdomain rtl_regdom_14_60_64 = {
+ .n_reg_rules = 4,
+ .alpha2 = "99",
+ .reg_rules = {
+ RTL819x_2GHZ_CH01_11,
+ RTL819x_2GHZ_CH12_13,
+ RTL819x_2GHZ_CH14,
+ RTL819x_5GHZ_5725_5850,
+ }
+};
+
+static const struct ieee80211_regdomain rtl_regdom_14 = {
+ .n_reg_rules = 3,
+ .alpha2 = "99",
+ .reg_rules = {
+ RTL819x_2GHZ_CH01_11,
+ RTL819x_2GHZ_CH12_13,
+ RTL819x_2GHZ_CH14,
+ }
};
static bool _rtl_is_radar_freq(u16 center_freq)
@@ -162,6 +214,8 @@
u32 bandwidth = 0;
int r;
+ if (!wiphy->bands[IEEE80211_BAND_2GHZ])
+ return;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
/*
@@ -292,25 +346,26 @@
{
switch (reg->country_code) {
case COUNTRY_CODE_FCC:
+ return &rtl_regdom_no_midband;
case COUNTRY_CODE_IC:
return &rtl_regdom_11;
case COUNTRY_CODE_ETSI:
+ case COUNTRY_CODE_TELEC_NETGEAR:
+ return &rtl_regdom_60_64;
case COUNTRY_CODE_SPAIN:
case COUNTRY_CODE_FRANCE:
case COUNTRY_CODE_ISRAEL:
- case COUNTRY_CODE_TELEC_NETGEAR:
- return &rtl_regdom_world;
+ case COUNTRY_CODE_WORLD_WIDE_13:
+ return &rtl_regdom_12_13;
case COUNTRY_CODE_MKK:
case COUNTRY_CODE_MKK1:
case COUNTRY_CODE_TELEC:
case COUNTRY_CODE_MIC:
- return &rtl_regdom_global;
+ return &rtl_regdom_14_60_64;
case COUNTRY_CODE_GLOBAL_DOMAIN:
- return &rtl_regdom_global;
- case COUNTRY_CODE_WORLD_WIDE_13:
- return &rtl_regdom_world;
+ return &rtl_regdom_14;
default:
- return &rtl_regdom_world;
+ return &rtl_regdom_no_midband;
}
}
@@ -323,9 +378,11 @@
const struct ieee80211_regdomain *regd;
wiphy->reg_notifier = reg_notifier;
+
wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY;
wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS;
+
regd = _rtl_regdomain_select(reg);
wiphy_apply_custom_regulatory(wiphy, regd);
_rtl_reg_apply_radar_flags(wiphy);
@@ -355,8 +412,8 @@
if (wiphy == NULL || &rtlpriv->regd == NULL)
return -EINVAL;
- /* force the channel plan to world wide 13 */
- rtlpriv->regd.country_code = COUNTRY_CODE_WORLD_WIDE_13;
+ /* init country_code from efuse channel plan */
+ rtlpriv->regd.country_code = rtlpriv->efuse.channel_plan;
RT_TRACE(rtlpriv, COMP_REGD, DBG_TRACE,
(KERN_DEBUG "rtl: EEPROM regdomain: 0x%0x\n",
@@ -373,8 +430,8 @@
country = _rtl_regd_find_country(rtlpriv->regd.country_code);
if (country) {
- rtlpriv->regd.alpha2[0] = country->isoName[0];
- rtlpriv->regd.alpha2[1] = country->isoName[1];
+ rtlpriv->regd.alpha2[0] = country->iso_name[0];
+ rtlpriv->regd.alpha2[1] = country->iso_name[1];
} else {
rtlpriv->regd.alpha2[0] = '0';
rtlpriv->regd.alpha2[1] = '0';
diff --git a/drivers/net/wireless/rtlwifi/regd.h b/drivers/net/wireless/rtlwifi/regd.h
index 4cdbc4a..d231189 100644
--- a/drivers/net/wireless/rtlwifi/regd.h
+++ b/drivers/net/wireless/rtlwifi/regd.h
@@ -32,7 +32,7 @@
struct country_code_to_enum_rd {
u16 countrycode;
- const char *isoName;
+ const char *iso_name;
};
enum country_code_type_t {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
index bb023274..9718382 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
@@ -28,10 +28,26 @@
*****************************************************************************/
#include "dm_common.h"
+#include "phy_common.h"
+#include "../pci.h"
+#include "../base.h"
struct dig_t dm_digtable;
static struct ps_t dm_pstable;
+#define BT_RSSI_STATE_NORMAL_POWER BIT_OFFSET_LEN_MASK_32(0, 1)
+#define BT_RSSI_STATE_AMDPU_OFF BIT_OFFSET_LEN_MASK_32(1, 1)
+#define BT_RSSI_STATE_SPECIAL_LOW BIT_OFFSET_LEN_MASK_32(2, 1)
+#define BT_RSSI_STATE_BG_EDCA_LOW BIT_OFFSET_LEN_MASK_32(3, 1)
+#define BT_RSSI_STATE_TXPOWER_LOW BIT_OFFSET_LEN_MASK_32(4, 1)
+
+#define RTLPRIV (struct rtl_priv *)
+#define GET_UNDECORATED_AVERAGE_RSSI(_priv) \
+ ((RTLPRIV(_priv))->mac80211.opmode == \
+ NL80211_IFTYPE_ADHOC) ? \
+ ((RTLPRIV(_priv))->dm.entry_min_undecoratedsmoothed_pwdb) : \
+ ((RTLPRIV(_priv))->dm.undecorated_smoothed_pwdb)
+
static const u32 ofdmswing_table[OFDM_TABLE_SIZE] = {
0x7f8001fe,
0x788001e2,
@@ -304,7 +320,7 @@
static void rtl92c_dm_initial_gain_multi_sta(struct ieee80211_hw *hw)
{
- static u8 binitialized; /* initialized to false */
+ static u8 initialized; /* initialized to false */
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
long rssi_strength = rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
@@ -315,11 +331,11 @@
if ((multi_sta == false) || (dm_digtable.cursta_connectctate !=
DIG_STA_DISCONNECT)) {
- binitialized = false;
+ initialized = false;
dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
return;
- } else if (binitialized == false) {
- binitialized = true;
+ } else if (initialized == false) {
+ initialized = true;
dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_0;
dm_digtable.cur_igvalue = 0x20;
rtl92c_dm_write_dig(hw);
@@ -461,10 +477,7 @@
if (mac->act_scanning == true)
return;
- if ((mac->link_state > MAC80211_NOLINK) &&
- (mac->link_state < MAC80211_LINKED))
- dm_digtable.cursta_connectctate = DIG_STA_BEFORE_CONNECT;
- else if (mac->link_state >= MAC80211_LINKED)
+ if (mac->link_state >= MAC80211_LINKED)
dm_digtable.cursta_connectctate = DIG_STA_CONNECT;
else
dm_digtable.cursta_connectctate = DIG_STA_DISCONNECT;
@@ -562,23 +575,42 @@
static void rtl92c_dm_check_edca_turbo(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
static u64 last_txok_cnt;
static u64 last_rxok_cnt;
- u64 cur_txok_cnt;
- u64 cur_rxok_cnt;
+ static u32 last_bt_edca_ul;
+ static u32 last_bt_edca_dl;
+ u64 cur_txok_cnt = 0;
+ u64 cur_rxok_cnt = 0;
u32 edca_be_ul = 0x5ea42b;
u32 edca_be_dl = 0x5ea42b;
+ bool bt_change_edca = false;
- if (mac->opmode == NL80211_IFTYPE_ADHOC)
- goto dm_checkedcaturbo_exit;
+ if ((last_bt_edca_ul != rtlpcipriv->bt_coexist.bt_edca_ul) ||
+ (last_bt_edca_dl != rtlpcipriv->bt_coexist.bt_edca_dl)) {
+ rtlpriv->dm.current_turbo_edca = false;
+ last_bt_edca_ul = rtlpcipriv->bt_coexist.bt_edca_ul;
+ last_bt_edca_dl = rtlpcipriv->bt_coexist.bt_edca_dl;
+ }
+
+ if (rtlpcipriv->bt_coexist.bt_edca_ul != 0) {
+ edca_be_ul = rtlpcipriv->bt_coexist.bt_edca_ul;
+ bt_change_edca = true;
+ }
+
+ if (rtlpcipriv->bt_coexist.bt_edca_dl != 0) {
+ edca_be_ul = rtlpcipriv->bt_coexist.bt_edca_dl;
+ bt_change_edca = true;
+ }
if (mac->link_state != MAC80211_LINKED) {
rtlpriv->dm.current_turbo_edca = false;
return;
}
- if (!mac->ht_enable) { /*FIX MERGE */
+ if ((!mac->ht_enable) && (!rtlpcipriv->bt_coexist.bt_coexistence)) {
if (!(edca_be_ul & 0xffff0000))
edca_be_ul |= 0x005e0000;
@@ -586,10 +618,12 @@
edca_be_dl |= 0x005e0000;
}
- if ((!rtlpriv->dm.is_any_nonbepkts) &&
- (!rtlpriv->dm.disable_framebursting)) {
+ if ((bt_change_edca) || ((!rtlpriv->dm.is_any_nonbepkts) &&
+ (!rtlpriv->dm.disable_framebursting))) {
+
cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;
cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
+
if (cur_rxok_cnt > 4 * cur_txok_cnt) {
if (!rtlpriv->dm.is_cur_rdlstate ||
!rtlpriv->dm.current_turbo_edca) {
@@ -618,7 +652,6 @@
}
}
-dm_checkedcaturbo_exit:
rtlpriv->dm.is_any_nonbepkts = false;
last_txok_cnt = rtlpriv->stats.txbytesunicast;
last_rxok_cnt = rtlpriv->stats.rxbytesunicast;
@@ -633,14 +666,14 @@
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
u8 thermalvalue, delta, delta_lck, delta_iqk;
long ele_a, ele_d, temp_cck, val_x, value32;
- long val_y, ele_c;
- u8 ofdm_index[2], cck_index, ofdm_index_old[2], cck_index_old;
+ long val_y, ele_c = 0;
+ u8 ofdm_index[2], cck_index = 0, ofdm_index_old[2], cck_index_old = 0;
int i;
bool is2t = IS_92C_SERIAL(rtlhal->version);
u8 txpwr_level[2] = {0, 0};
u8 ofdm_min_index = 6, rf;
- rtlpriv->dm.txpower_trackingInit = true;
+ rtlpriv->dm.txpower_trackinginit = true;
RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
("rtl92c_dm_txpower_tracking_callback_thermalmeter\n"));
@@ -683,7 +716,6 @@
for (i = 0; i < OFDM_TABLE_LENGTH; i++) {
if (ele_d == (ofdmswing_table[i] &
MASKOFDM_D)) {
- ofdm_index_old[1] = (u8) i;
RT_TRACE(rtlpriv, COMP_POWER_TRACKING,
DBG_LOUD,
@@ -1062,7 +1094,7 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
rtlpriv->dm.txpower_tracking = true;
- rtlpriv->dm.txpower_trackingInit = false;
+ rtlpriv->dm.txpower_trackinginit = false;
RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
("pMgntInfo->txpower_tracking = %d\n",
@@ -1132,6 +1164,7 @@
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rate_adaptive *p_ra = &(rtlpriv->ra);
u32 low_rssithresh_for_ra, high_rssithresh_for_ra;
+ struct ieee80211_sta *sta = NULL;
if (is_hal_stop(rtlhal)) {
RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
@@ -1145,8 +1178,8 @@
return;
}
- if (mac->link_state == MAC80211_LINKED) {
-
+ if (mac->link_state == MAC80211_LINKED &&
+ mac->opmode == NL80211_IFTYPE_STATION) {
switch (p_ra->pre_ratr_state) {
case DM_RATR_STA_HIGH:
high_rssithresh_for_ra = 50;
@@ -1185,10 +1218,13 @@
("PreState = %d, CurState = %d\n",
p_ra->pre_ratr_state, p_ra->ratr_state));
- rtlpriv->cfg->ops->update_rate_mask(hw,
+ rcu_read_lock();
+ sta = ieee80211_find_sta(mac->vif, mac->bssid);
+ rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
p_ra->ratr_state);
p_ra->pre_ratr_state = p_ra->ratr_state;
+ rcu_read_unlock();
}
}
}
@@ -1202,51 +1238,6 @@
dm_pstable.rssi_val_min = 0;
}
-static void rtl92c_dm_1r_cca(struct ieee80211_hw *hw)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
-
- if (dm_pstable.rssi_val_min != 0) {
- if (dm_pstable.pre_ccastate == CCA_2R) {
- if (dm_pstable.rssi_val_min >= 35)
- dm_pstable.cur_ccasate = CCA_1R;
- else
- dm_pstable.cur_ccasate = CCA_2R;
- } else {
- if (dm_pstable.rssi_val_min <= 30)
- dm_pstable.cur_ccasate = CCA_2R;
- else
- dm_pstable.cur_ccasate = CCA_1R;
- }
- } else {
- dm_pstable.cur_ccasate = CCA_MAX;
- }
-
- if (dm_pstable.pre_ccastate != dm_pstable.cur_ccasate) {
- if (dm_pstable.cur_ccasate == CCA_1R) {
- if (get_rf_type(rtlphy) == RF_2T2R) {
- rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
- MASKBYTE0, 0x13);
- rtl_set_bbreg(hw, 0xe70, MASKBYTE3, 0x20);
- } else {
- rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
- MASKBYTE0, 0x23);
- rtl_set_bbreg(hw, 0xe70, 0x7fc00000, 0x10c);
- }
- } else {
- rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0,
- 0x33);
- rtl_set_bbreg(hw, 0xe70, MASKBYTE3, 0x63);
- }
- dm_pstable.pre_ccastate = dm_pstable.cur_ccasate;
- }
-
- RT_TRACE(rtlpriv, DBG_LOUD, DBG_LOUD, ("CCAStage = %s\n",
- (dm_pstable.cur_ccasate ==
- 0) ? "1RCCA" : "2RCCA"));
-}
-
void rtl92c_dm_rf_saving(struct ieee80211_hw *hw, u8 bforce_in_normal)
{
static u8 initialize;
@@ -1352,7 +1343,9 @@
}
if (IS_92C_SERIAL(rtlhal->version))
- rtl92c_dm_1r_cca(hw);
+ ;/* rtl92c_dm_1r_cca(hw); */
+ else
+ rtl92c_dm_rf_saving(hw, false);
}
void rtl92c_dm_init(struct ieee80211_hw *hw)
@@ -1369,6 +1362,84 @@
}
EXPORT_SYMBOL(rtl92c_dm_init);
+void rtl92c_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ long undecorated_smoothed_pwdb;
+
+ if (!rtlpriv->dm.dynamic_txpower_enable)
+ return;
+
+ if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+ return;
+ }
+
+ if ((mac->link_state < MAC80211_LINKED) &&
+ (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+ ("Not connected to any\n"));
+
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+
+ rtlpriv->dm.last_dtp_lvl = TXHIGHPWRLEVEL_NORMAL;
+ return;
+ }
+
+ if (mac->link_state >= MAC80211_LINKED) {
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("AP Client PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.undecorated_smoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("STA Default Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ }
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("AP Ext Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ }
+
+ if (undecorated_smoothed_pwdb >= TX_POWER_NEAR_FIELD_THRESH_LVL2) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_LEVEL1;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("TXHIGHPWRLEVEL_LEVEL1 (TxPwr=0x0)\n"));
+ } else if ((undecorated_smoothed_pwdb <
+ (TX_POWER_NEAR_FIELD_THRESH_LVL2 - 3)) &&
+ (undecorated_smoothed_pwdb >=
+ TX_POWER_NEAR_FIELD_THRESH_LVL1)) {
+
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_LEVEL1;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("TXHIGHPWRLEVEL_LEVEL1 (TxPwr=0x10)\n"));
+ } else if (undecorated_smoothed_pwdb <
+ (TX_POWER_NEAR_FIELD_THRESH_LVL1 - 5)) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("TXHIGHPWRLEVEL_NORMAL\n"));
+ }
+
+ if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl)) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("PHY_SetTxPowerLevel8192S() Channel = %d\n",
+ rtlphy->current_channel));
+ rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+ }
+
+ rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
+}
+
void rtl92c_dm_watchdog(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1388,11 +1459,321 @@
rtl92c_dm_dig(hw);
rtl92c_dm_false_alarm_counter_statistics(hw);
rtl92c_dm_dynamic_bb_powersaving(hw);
- rtlpriv->cfg->ops->dm_dynamic_txpower(hw);
+ rtl92c_dm_dynamic_txpower(hw);
rtl92c_dm_check_txpower_tracking(hw);
rtl92c_dm_refresh_rate_adaptive_mask(hw);
+ rtl92c_dm_bt_coexist(hw);
rtl92c_dm_check_edca_turbo(hw);
-
}
}
EXPORT_SYMBOL(rtl92c_dm_watchdog);
+
+u8 rtl92c_bt_rssi_state_change(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+ long undecorated_smoothed_pwdb;
+ u8 curr_bt_rssi_state = 0x00;
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ undecorated_smoothed_pwdb =
+ GET_UNDECORATED_AVERAGE_RSSI(rtlpriv);
+ } else {
+ if (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)
+ undecorated_smoothed_pwdb = 100;
+ else
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+ }
+
+ /* Check RSSI to determine HighPower/NormalPower state for
+ * BT coexistence. */
+ if (undecorated_smoothed_pwdb >= 67)
+ curr_bt_rssi_state &= (~BT_RSSI_STATE_NORMAL_POWER);
+ else if (undecorated_smoothed_pwdb < 62)
+ curr_bt_rssi_state |= BT_RSSI_STATE_NORMAL_POWER;
+
+ /* Check RSSI to determine AMPDU setting for BT coexistence. */
+ if (undecorated_smoothed_pwdb >= 40)
+ curr_bt_rssi_state &= (~BT_RSSI_STATE_AMDPU_OFF);
+ else if (undecorated_smoothed_pwdb <= 32)
+ curr_bt_rssi_state |= BT_RSSI_STATE_AMDPU_OFF;
+
+ /* Marked RSSI state. It will be used to determine BT coexistence
+ * setting later. */
+ if (undecorated_smoothed_pwdb < 35)
+ curr_bt_rssi_state |= BT_RSSI_STATE_SPECIAL_LOW;
+ else
+ curr_bt_rssi_state &= (~BT_RSSI_STATE_SPECIAL_LOW);
+
+ /* Set Tx Power according to BT status. */
+ if (undecorated_smoothed_pwdb >= 30)
+ curr_bt_rssi_state |= BT_RSSI_STATE_TXPOWER_LOW;
+ else if (undecorated_smoothed_pwdb < 25)
+ curr_bt_rssi_state &= (~BT_RSSI_STATE_TXPOWER_LOW);
+
+ /* Check BT state related to BT_Idle in B/G mode. */
+ if (undecorated_smoothed_pwdb < 15)
+ curr_bt_rssi_state |= BT_RSSI_STATE_BG_EDCA_LOW;
+ else
+ curr_bt_rssi_state &= (~BT_RSSI_STATE_BG_EDCA_LOW);
+
+ if (curr_bt_rssi_state != rtlpcipriv->bt_coexist.bt_rssi_state) {
+ rtlpcipriv->bt_coexist.bt_rssi_state = curr_bt_rssi_state;
+ return true;
+ } else {
+ return false;
+ }
+}
+EXPORT_SYMBOL(rtl92c_bt_rssi_state_change);
+
+static bool rtl92c_bt_state_change(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+ u32 polling, ratio_tx, ratio_pri;
+ u32 bt_tx, bt_pri;
+ u8 bt_state;
+ u8 cur_service_type;
+
+ if (rtlpriv->mac80211.link_state < MAC80211_LINKED)
+ return false;
+
+ bt_state = rtl_read_byte(rtlpriv, 0x4fd);
+ bt_tx = rtl_read_dword(rtlpriv, 0x488);
+ bt_tx = bt_tx & 0x00ffffff;
+ bt_pri = rtl_read_dword(rtlpriv, 0x48c);
+ bt_pri = bt_pri & 0x00ffffff;
+ polling = rtl_read_dword(rtlpriv, 0x490);
+
+ if (bt_tx == 0xffffffff && bt_pri == 0xffffffff &&
+ polling == 0xffffffff && bt_state == 0xff)
+ return false;
+
+ bt_state &= BIT_OFFSET_LEN_MASK_32(0, 1);
+ if (bt_state != rtlpcipriv->bt_coexist.bt_cur_state) {
+ rtlpcipriv->bt_coexist.bt_cur_state = bt_state;
+
+ if (rtlpcipriv->bt_coexist.reg_bt_sco == 3) {
+ rtlpcipriv->bt_coexist.bt_service = BT_IDLE;
+
+ bt_state = bt_state |
+ ((rtlpcipriv->bt_coexist.bt_ant_isolation == 1) ?
+ 0 : BIT_OFFSET_LEN_MASK_32(1, 1)) |
+ BIT_OFFSET_LEN_MASK_32(2, 1);
+ rtl_write_byte(rtlpriv, 0x4fd, bt_state);
+ }
+ return true;
+ }
+
+ ratio_tx = bt_tx * 1000 / polling;
+ ratio_pri = bt_pri * 1000 / polling;
+ rtlpcipriv->bt_coexist.ratio_tx = ratio_tx;
+ rtlpcipriv->bt_coexist.ratio_pri = ratio_pri;
+
+ if (bt_state && rtlpcipriv->bt_coexist.reg_bt_sco == 3) {
+
+ if ((ratio_tx < 30) && (ratio_pri < 30))
+ cur_service_type = BT_IDLE;
+ else if ((ratio_pri > 110) && (ratio_pri < 250))
+ cur_service_type = BT_SCO;
+ else if ((ratio_tx >= 200) && (ratio_pri >= 200))
+ cur_service_type = BT_BUSY;
+ else if ((ratio_tx >= 350) && (ratio_tx < 500))
+ cur_service_type = BT_OTHERBUSY;
+ else if (ratio_tx >= 500)
+ cur_service_type = BT_PAN;
+ else
+ cur_service_type = BT_OTHER_ACTION;
+
+ if (cur_service_type != rtlpcipriv->bt_coexist.bt_service) {
+ rtlpcipriv->bt_coexist.bt_service = cur_service_type;
+ bt_state = bt_state |
+ ((rtlpcipriv->bt_coexist.bt_ant_isolation == 1) ?
+ 0 : BIT_OFFSET_LEN_MASK_32(1, 1)) |
+ ((rtlpcipriv->bt_coexist.bt_service != BT_IDLE) ?
+ 0 : BIT_OFFSET_LEN_MASK_32(2, 1));
+
+ /* Add interrupt migration when bt is not ini
+ * idle state (no traffic). */
+ if (rtlpcipriv->bt_coexist.bt_service != BT_IDLE) {
+ rtl_write_word(rtlpriv, 0x504, 0x0ccc);
+ rtl_write_byte(rtlpriv, 0x506, 0x54);
+ rtl_write_byte(rtlpriv, 0x507, 0x54);
+ } else {
+ rtl_write_byte(rtlpriv, 0x506, 0x00);
+ rtl_write_byte(rtlpriv, 0x507, 0x00);
+ }
+
+ rtl_write_byte(rtlpriv, 0x4fd, bt_state);
+ return true;
+ }
+ }
+
+ return false;
+
+}
+
+static bool rtl92c_bt_wifi_connect_change(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ static bool media_connect;
+
+ if (rtlpriv->mac80211.link_state < MAC80211_LINKED) {
+ media_connect = false;
+ } else {
+ if (!media_connect) {
+ media_connect = true;
+ return true;
+ }
+ media_connect = true;
+ }
+
+ return false;
+}
+
+static void rtl92c_bt_set_normal(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+
+ if (rtlpcipriv->bt_coexist.bt_service == BT_OTHERBUSY) {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0x5ea72b;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0x5ea72b;
+ } else if (rtlpcipriv->bt_coexist.bt_service == BT_BUSY) {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0x5eb82f;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0x5eb82f;
+ } else if (rtlpcipriv->bt_coexist.bt_service == BT_SCO) {
+ if (rtlpcipriv->bt_coexist.ratio_tx > 160) {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0x5ea72f;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0x5ea72f;
+ } else {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0x5ea32b;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0x5ea42b;
+ }
+ } else {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0;
+ }
+
+ if ((rtlpcipriv->bt_coexist.bt_service != BT_IDLE) &&
+ (rtlpriv->mac80211.mode == WIRELESS_MODE_G ||
+ (rtlpriv->mac80211.mode == (WIRELESS_MODE_G | WIRELESS_MODE_B))) &&
+ (rtlpcipriv->bt_coexist.bt_rssi_state &
+ BT_RSSI_STATE_BG_EDCA_LOW)) {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0x5eb82b;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0x5eb82b;
+ }
+}
+
+static void rtl92c_bt_ant_isolation(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+
+ /* Only enable HW BT coexist when BT in "Busy" state. */
+ if (rtlpriv->mac80211.vendor == PEER_CISCO &&
+ rtlpcipriv->bt_coexist.bt_service == BT_OTHER_ACTION) {
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0xa0);
+ } else {
+ if ((rtlpcipriv->bt_coexist.bt_service == BT_BUSY) &&
+ (rtlpcipriv->bt_coexist.bt_rssi_state &
+ BT_RSSI_STATE_NORMAL_POWER)) {
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0xa0);
+ } else if ((rtlpcipriv->bt_coexist.bt_service ==
+ BT_OTHER_ACTION) && (rtlpriv->mac80211.mode <
+ WIRELESS_MODE_N_24G) &&
+ (rtlpcipriv->bt_coexist.bt_rssi_state &
+ BT_RSSI_STATE_SPECIAL_LOW)) {
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0xa0);
+ } else if (rtlpcipriv->bt_coexist.bt_service == BT_PAN) {
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0x00);
+ } else {
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0x00);
+ }
+ }
+
+ if (rtlpcipriv->bt_coexist.bt_service == BT_PAN)
+ rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x10100);
+ else
+ rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x0);
+
+ if (rtlpcipriv->bt_coexist.bt_rssi_state &
+ BT_RSSI_STATE_NORMAL_POWER) {
+ rtl92c_bt_set_normal(hw);
+ } else {
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0;
+ }
+
+ if (rtlpcipriv->bt_coexist.bt_service != BT_IDLE) {
+ rtlpriv->cfg->ops->set_rfreg(hw,
+ RF90_PATH_A,
+ 0x1e,
+ 0xf0, 0xf);
+ } else {
+ rtlpriv->cfg->ops->set_rfreg(hw,
+ RF90_PATH_A, 0x1e, 0xf0,
+ rtlpcipriv->bt_coexist.bt_rfreg_origin_1e);
+ }
+
+ if (!rtlpriv->dm.dynamic_txpower_enable) {
+ if (rtlpcipriv->bt_coexist.bt_service != BT_IDLE) {
+ if (rtlpcipriv->bt_coexist.bt_rssi_state &
+ BT_RSSI_STATE_TXPOWER_LOW) {
+ rtlpriv->dm.dynamic_txhighpower_lvl =
+ TXHIGHPWRLEVEL_BT2;
+ } else {
+ rtlpriv->dm.dynamic_txhighpower_lvl =
+ TXHIGHPWRLEVEL_BT1;
+ }
+ } else {
+ rtlpriv->dm.dynamic_txhighpower_lvl =
+ TXHIGHPWRLEVEL_NORMAL;
+ }
+ rtl92c_phy_set_txpower_level(hw,
+ rtlpriv->phy.current_channel);
+ }
+}
+
+static void rtl92c_check_bt_change(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+ if (rtlpcipriv->bt_coexist.bt_cur_state) {
+ if (rtlpcipriv->bt_coexist.bt_ant_isolation)
+ rtl92c_bt_ant_isolation(hw);
+ } else {
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0x00);
+ rtlpriv->cfg->ops->set_rfreg(hw, RF90_PATH_A, 0x1e, 0xf0,
+ rtlpcipriv->bt_coexist.bt_rfreg_origin_1e);
+
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0;
+ }
+}
+
+void rtl92c_dm_bt_coexist(struct ieee80211_hw *hw)
+{
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+ bool wifi_connect_change;
+ bool bt_state_change;
+ bool rssi_state_change;
+
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ (rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4)) {
+
+ wifi_connect_change = rtl92c_bt_wifi_connect_change(hw);
+ bt_state_change = rtl92c_bt_state_change(hw);
+ rssi_state_change = rtl92c_bt_rssi_state_change(hw);
+
+ if (wifi_connect_change || bt_state_change || rssi_state_change)
+ rtl92c_check_bt_change(hw);
+ }
+}
+EXPORT_SYMBOL(rtl92c_dm_bt_coexist);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h
index b9cbb0a..b9736d3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h
@@ -200,5 +200,7 @@
void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
+void rtl92c_dm_dynamic_txpower(struct ieee80211_hw *hw);
+void rtl92c_dm_bt_coexist(struct ieee80211_hw *hw);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
index 28a6ce3..50303e1 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
@@ -171,7 +171,6 @@
static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- int err = -EIO;
u32 counter = 0;
u32 value32;
@@ -184,7 +183,7 @@
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("chksum report faill ! REG_MCUFWDL:0x%08x .\n",
value32));
- goto exit;
+ return -EIO;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
@@ -204,8 +203,7 @@
("Polling FW ready success!!"
" REG_MCUFWDL:0x%08x .\n",
value32));
- err = 0;
- goto exit;
+ return 0;
}
mdelay(FW_8192C_POLLING_DELAY);
@@ -214,9 +212,7 @@
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32));
-
-exit:
- return err;
+ return -EIO;
}
int rtl92c_download_fw(struct ieee80211_hw *hw)
@@ -226,32 +222,16 @@
struct rtl92c_firmware_header *pfwheader;
u8 *pfwdata;
u32 fwsize;
- int err;
enum version_8192c version = rtlhal->version;
- const struct firmware *firmware;
- printk(KERN_INFO "rtl8192cu: Loading firmware file %s\n",
+ printk(KERN_INFO "rtl8192c: Loading firmware file %s\n",
rtlpriv->cfg->fw_name);
- err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
- rtlpriv->io.dev);
- if (err) {
- printk(KERN_ERR "rtl8192cu: Firmware loading failed\n");
+ if (!rtlhal->pfirmware)
return 1;
- }
-
- if (firmware->size > 0x4000) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- ("Firmware is too big!\n"));
- release_firmware(firmware);
- return 1;
- }
-
- memcpy(rtlhal->pfirmware, firmware->data, firmware->size);
- fwsize = firmware->size;
- release_firmware(firmware);
pfwheader = (struct rtl92c_firmware_header *)rtlhal->pfirmware;
pfwdata = (u8 *) rtlhal->pfirmware;
+ fwsize = rtlhal->fwsize;
if (IS_FW_HEADER_EXIST(pfwheader)) {
RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
@@ -267,8 +247,7 @@
_rtl92c_write_fw(hw, version, pfwdata, fwsize);
_rtl92c_enable_fw_download(hw, false);
- err = _rtl92c_fw_free_to_go(hw);
- if (err) {
+ if (_rtl92c_fw_free_to_go(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Firmware is not ready to run!\n"));
} else {
@@ -300,10 +279,9 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
u8 boxnum;
- u16 box_reg, box_extreg;
+ u16 box_reg = 0, box_extreg = 0;
u8 u1b_tmp;
bool isfw_read = false;
- u8 buf_index = 0;
bool bwrite_sucess = false;
u8 wait_h2c_limmit = 100;
u8 wait_writeh2c_limmit = 100;
@@ -414,7 +392,7 @@
case 1:
boxcontent[0] &= ~(BIT(7));
memcpy((u8 *) (boxcontent) + 1,
- p_cmdbuffer + buf_index, 1);
+ p_cmdbuffer, 1);
for (idx = 0; idx < 4; idx++) {
rtl_write_byte(rtlpriv, box_reg + idx,
@@ -424,7 +402,7 @@
case 2:
boxcontent[0] &= ~(BIT(7));
memcpy((u8 *) (boxcontent) + 1,
- p_cmdbuffer + buf_index, 2);
+ p_cmdbuffer, 2);
for (idx = 0; idx < 4; idx++) {
rtl_write_byte(rtlpriv, box_reg + idx,
@@ -434,7 +412,7 @@
case 3:
boxcontent[0] &= ~(BIT(7));
memcpy((u8 *) (boxcontent) + 1,
- p_cmdbuffer + buf_index, 3);
+ p_cmdbuffer, 3);
for (idx = 0; idx < 4; idx++) {
rtl_write_byte(rtlpriv, box_reg + idx,
@@ -444,9 +422,9 @@
case 4:
boxcontent[0] |= (BIT(7));
memcpy((u8 *) (boxextcontent),
- p_cmdbuffer + buf_index, 2);
+ p_cmdbuffer, 2);
memcpy((u8 *) (boxcontent) + 1,
- p_cmdbuffer + buf_index + 2, 2);
+ p_cmdbuffer + 2, 2);
for (idx = 0; idx < 2; idx++) {
rtl_write_byte(rtlpriv, box_extreg + idx,
@@ -461,9 +439,9 @@
case 5:
boxcontent[0] |= (BIT(7));
memcpy((u8 *) (boxextcontent),
- p_cmdbuffer + buf_index, 2);
+ p_cmdbuffer, 2);
memcpy((u8 *) (boxcontent) + 1,
- p_cmdbuffer + buf_index + 2, 3);
+ p_cmdbuffer + 2, 3);
for (idx = 0; idx < 2; idx++) {
rtl_write_byte(rtlpriv, box_extreg + idx,
@@ -561,6 +539,39 @@
}
EXPORT_SYMBOL(rtl92c_set_fw_pwrmode_cmd);
+static bool _rtl92c_cmd_send_packet(struct ieee80211_hw *hw,
+ struct sk_buff *skb)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl8192_tx_ring *ring;
+ struct rtl_tx_desc *pdesc;
+ u8 own;
+ unsigned long flags;
+ struct sk_buff *pskb = NULL;
+
+ ring = &rtlpci->tx_ring[BEACON_QUEUE];
+
+ pskb = __skb_dequeue(&ring->queue);
+ if (pskb)
+ kfree_skb(pskb);
+
+ spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+ pdesc = &ring->desc[0];
+ own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc, true, HW_DESC_OWN);
+
+ rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *) pdesc, 1, 1, skb);
+
+ __skb_queue_tail(&ring->queue, skb);
+
+ spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+ rtlpriv->cfg->ops->tx_polling(hw, BEACON_QUEUE);
+
+ return true;
+}
+
#define BEACON_PG 0 /*->1*/
#define PSPOLL_PG 2
#define NULL_PG 3
@@ -678,7 +689,7 @@
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
@@ -687,12 +698,12 @@
u32 totalpacketlen;
bool rtstatus;
u8 u1RsvdPageLoc[3] = {0};
- bool b_dlok = false;
+ bool dlok = false;
u8 *beacon;
- u8 *p_pspoll;
+ u8 *pspoll;
u8 *nullfunc;
- u8 *p_probersp;
+ u8 *probersp;
/*---------------------------------------------------------
(1) beacon
---------------------------------------------------------*/
@@ -703,10 +714,10 @@
/*-------------------------------------------------------
(2) ps-poll
--------------------------------------------------------*/
- p_pspoll = &reserved_page_packet[PSPOLL_PG * 128];
- SET_80211_PS_POLL_AID(p_pspoll, (mac->assoc_id | 0xc000));
- SET_80211_PS_POLL_BSSID(p_pspoll, mac->bssid);
- SET_80211_PS_POLL_TA(p_pspoll, mac->mac_addr);
+ pspoll = &reserved_page_packet[PSPOLL_PG * 128];
+ SET_80211_PS_POLL_AID(pspoll, (mac->assoc_id | 0xc000));
+ SET_80211_PS_POLL_BSSID(pspoll, mac->bssid);
+ SET_80211_PS_POLL_TA(pspoll, mac->mac_addr);
SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(u1RsvdPageLoc, PSPOLL_PG);
@@ -723,10 +734,10 @@
/*---------------------------------------------------------
(4) probe response
----------------------------------------------------------*/
- p_probersp = &reserved_page_packet[PROBERSP_PG * 128];
- SET_80211_HDR_ADDRESS1(p_probersp, mac->bssid);
- SET_80211_HDR_ADDRESS2(p_probersp, mac->mac_addr);
- SET_80211_HDR_ADDRESS3(p_probersp, mac->bssid);
+ probersp = &reserved_page_packet[PROBERSP_PG * 128];
+ SET_80211_HDR_ADDRESS1(probersp, mac->bssid);
+ SET_80211_HDR_ADDRESS2(probersp, mac->mac_addr);
+ SET_80211_HDR_ADDRESS3(probersp, mac->bssid);
SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(u1RsvdPageLoc, PROBERSP_PG);
@@ -744,12 +755,12 @@
memcpy((u8 *) skb_put(skb, totalpacketlen),
&reserved_page_packet, totalpacketlen);
- rtstatus = rtlpriv->cfg->ops->cmd_send_packet(hw, skb);
+ rtstatus = _rtl92c_cmd_send_packet(hw, skb);
if (rtstatus)
- b_dlok = true;
+ dlok = true;
- if (b_dlok) {
+ if (dlok) {
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
("Set RSVD page location to Fw.\n"));
RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
index 3db33bd..3d5823c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
@@ -27,8 +27,8 @@
*
*****************************************************************************/
-#ifndef __RTL92C__FW__H__
-#define __RTL92C__FW__H__
+#ifndef __RTL92C__FW__COMMON__H__
+#define __RTL92C__FW__COMMON__H__
#define FW_8192C_SIZE 0x3000
#define FW_8192C_START_ADDRESS 0x1000
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
index a702282..c5424ca 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
@@ -78,27 +78,29 @@
RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
" data(%#x)\n", regaddr, bitmask,
data));
+
}
EXPORT_SYMBOL(rtl92c_phy_set_bb_reg);
u32 _rtl92c_phy_fw_rf_serial_read(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 offset)
+ enum radio_path rfpath, u32 offset)
{
RT_ASSERT(false, ("deprecated!\n"));
return 0;
+
}
EXPORT_SYMBOL(_rtl92c_phy_fw_rf_serial_read);
void _rtl92c_phy_fw_rf_serial_write(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 offset,
- u32 data)
+ enum radio_path rfpath, u32 offset,
+ u32 data)
{
RT_ASSERT(false, ("deprecated!\n"));
}
EXPORT_SYMBOL(_rtl92c_phy_fw_rf_serial_write);
u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 offset)
+ enum radio_path rfpath, u32 offset)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -149,8 +151,8 @@
EXPORT_SYMBOL(_rtl92c_phy_rf_serial_read);
void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 offset,
- u32 data)
+ enum radio_path rfpath, u32 offset,
+ u32 data)
{
u32 data_and_addr;
u32 newoffset;
@@ -197,6 +199,7 @@
rtl_set_bbreg(hw, 0xe80, 0x0c000000, 0x2);
rtl_set_bbreg(hw, 0xe88, 0x0c000000, 0x2);
}
+
bool rtl92c_phy_rf_config(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -241,13 +244,14 @@
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
RFPGA0_XA_HSSIPARAMETER2,
0x200));
+
return true;
}
EXPORT_SYMBOL(_rtl92c_phy_bb8192c_config_parafile);
void _rtl92c_store_pwrIndex_diffrate_offset(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask,
- u32 data)
+ u32 regaddr, u32 bitmask,
+ u32 data)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -317,61 +321,48 @@
}
if (regaddr == RTXAGC_B_RATE54_24) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][9] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][9] = 0x%x\n",
rtlphy->pwrgroup_cnt,
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][9]));
}
-
if (regaddr == RTXAGC_B_CCK1_55_MCS32) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][14] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][14] = 0x%x\n",
rtlphy->pwrgroup_cnt,
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][14]));
}
-
if (regaddr == RTXAGC_B_CCK11_A_CCK2_11 && bitmask == 0x000000ff) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][15] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][15] = 0x%x\n",
rtlphy->pwrgroup_cnt,
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][15]));
}
-
if (regaddr == RTXAGC_B_MCS03_MCS00) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][10] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][10] = 0x%x\n",
rtlphy->pwrgroup_cnt,
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][10]));
}
-
if (regaddr == RTXAGC_B_MCS07_MCS04) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][11] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][11] = 0x%x\n",
rtlphy->pwrgroup_cnt,
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][11]));
}
-
if (regaddr == RTXAGC_B_MCS11_MCS08) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][12] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][12] = 0x%x\n",
rtlphy->pwrgroup_cnt,
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][12]));
}
-
if (regaddr == RTXAGC_B_MCS15_MCS12) {
rtlphy->MCS_TXPWR[rtlphy->pwrgroup_cnt][13] = data;
-
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
("MCSTxPowerLevelOriginalOffset[%d][13] = 0x%x\n",
rtlphy->pwrgroup_cnt,
@@ -583,6 +574,7 @@
rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+
}
void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel)
@@ -611,7 +603,6 @@
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
u8 idx;
u8 rf_path;
-
u8 ccktxpwridx = _rtl92c_phy_dbm_to_txpwr_Idx(hw,
WIRELESS_MODE_B,
power_indbm);
@@ -639,11 +630,6 @@
}
EXPORT_SYMBOL(rtl92c_phy_update_txpower_dbm);
-void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw, u16 beaconinterval)
-{
-}
-EXPORT_SYMBOL(rtl92c_phy_set_beacon_hw_reg);
-
u8 _rtl92c_phy_dbm_to_txpwr_Idx(struct ieee80211_hw *hw,
enum wireless_mode wirelessmode,
long power_indbm)
@@ -741,9 +727,9 @@
if (rtlphy->set_bwmode_inprogress)
return;
rtlphy->set_bwmode_inprogress = true;
- if ((!is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw)))
- rtlpriv->cfg->ops->phy_set_bw_mode_callback(hw);
- else {
+ if ((!is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) {
+ rtlphy->set_bwmode_inprogress = false;
+ } else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
("FALSE driver sleep or unload\n"));
rtlphy->set_bwmode_inprogress = false;
@@ -773,8 +759,9 @@
mdelay(delay);
else
continue;
- } else
+ } else {
rtlphy->sw_chnl_inprogress = false;
+ }
break;
} while (true);
RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
@@ -811,9 +798,32 @@
}
EXPORT_SYMBOL(rtl92c_phy_sw_chnl);
-static bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
- u8 channel, u8 *stage, u8 *step,
- u32 *delay)
+static bool _rtl92c_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+ u32 cmdtableidx, u32 cmdtablesz,
+ enum swchnlcmd_id cmdid,
+ u32 para1, u32 para2, u32 msdelay)
+{
+ struct swchnlcmd *pcmd;
+
+ if (cmdtable == NULL) {
+ RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
+ return false;
+ }
+
+ if (cmdtableidx >= cmdtablesz)
+ return false;
+
+ pcmd = cmdtable + cmdtableidx;
+ pcmd->cmdid = cmdid;
+ pcmd->para1 = para1;
+ pcmd->para2 = para2;
+ pcmd->msdelay = msdelay;
+ return true;
+}
+
+bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+ u8 channel, u8 *stage, u8 *step,
+ u32 *delay)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -917,29 +927,6 @@
return false;
}
-static bool _rtl92c_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
- u32 cmdtableidx, u32 cmdtablesz,
- enum swchnlcmd_id cmdid,
- u32 para1, u32 para2, u32 msdelay)
-{
- struct swchnlcmd *pcmd;
-
- if (cmdtable == NULL) {
- RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
- return false;
- }
-
- if (cmdtableidx >= cmdtablesz)
- return false;
-
- pcmd = cmdtable + cmdtableidx;
- pcmd->cmdid = cmdid;
- pcmd->para1 = para1;
- pcmd->para2 = para2;
- pcmd->msdelay = msdelay;
- return true;
-}
-
bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath)
{
return true;
@@ -1002,13 +989,13 @@
reg_ebc = rtl_get_bbreg(hw, 0xebc, MASKDWORD);
reg_ec4 = rtl_get_bbreg(hw, 0xec4, MASKDWORD);
reg_ecc = rtl_get_bbreg(hw, 0xecc, MASKDWORD);
+
if (!(reg_eac & BIT(31)) &&
(((reg_eb4 & 0x03FF0000) >> 16) != 0x142) &&
(((reg_ebc & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
else
return result;
-
if (!(reg_eac & BIT(30)) &&
(((reg_ec4 & 0x03FF0000) >> 16) != 0x132) &&
(((reg_ecc & 0x03FF0000) >> 16) != 0x36))
@@ -1023,9 +1010,9 @@
u32 oldval_0, x, tx0_a, reg;
long y, tx0_c;
- if (final_candidate == 0xFF)
+ if (final_candidate == 0xFF) {
return;
- else if (iqk_ok) {
+ } else if (iqk_ok) {
oldval_0 = (rtl_get_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
MASKDWORD) >> 22) & 0x3FF;
x = result[final_candidate][0];
@@ -1063,9 +1050,9 @@
u32 oldval_1, x, tx1_a, reg;
long y, tx1_c;
- if (final_candidate == 0xFF)
+ if (final_candidate == 0xFF) {
return;
- else if (iqk_ok) {
+ } else if (iqk_ok) {
oldval_1 = (rtl_get_bbreg(hw, ROFDM0_XBTXIQIMBALANCE,
MASKDWORD) >> 22) & 0x3FF;
x = result[final_candidate][4];
@@ -1282,6 +1269,7 @@
RFPGA0_XA_HSSIPARAMETER1,
BIT(8));
}
+
if (!rtlphy->rfpi_enable)
_rtl92c_phy_pi_mode_switch(hw, true);
if (t == 0) {
@@ -1317,9 +1305,10 @@
0x3FF0000) >> 16;
break;
} else if (i == (retrycount - 1) && patha_ok == 0x01)
+
result[t][0] = (rtl_get_bbreg(hw, 0xe94,
MASKDWORD) & 0x3FF0000) >>
- 16;
+ 16;
result[t][1] =
(rtl_get_bbreg(hw, 0xe9c, MASKDWORD) & 0x3FF0000) >> 16;
@@ -1375,8 +1364,7 @@
static void _rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw,
char delta, bool is2t)
{
- /* This routine is deliberately dummied out for later fixes */
-#if 0
+#if 0 /* This routine is deliberately dummied out for later fixes */
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
@@ -1434,7 +1422,7 @@
0x04db25a4, 0x0b1b25a4
};
- u32 apk_offset[PATH_NUM] = { 0xb68, 0xb6c };
+ const u32 apk_offset[PATH_NUM] = { 0xb68, 0xb6c };
u32 apk_normal_offset[PATH_NUM] = { 0xb28, 0xb98 };
@@ -1463,13 +1451,15 @@
0x00050006
};
- const u32 apk_result[PATH_NUM][APK_BB_REG_NUM];
+ u32 apk_result[PATH_NUM][APK_BB_REG_NUM];
long bb_offset, delta_v, delta_offset;
if (!is2t)
pathbound = 1;
+ return;
+
for (index = 0; index < PATH_NUM; index++) {
apk_offset[index] = apk_normal_offset[index];
apk_value[index] = apk_normal_value[index];
@@ -1730,8 +1720,7 @@
0x08));
}
-
- rtlphy->apk_done = true;
+ rtlphy->b_apk_done = true;
#endif
}
@@ -1758,6 +1747,7 @@
rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, 0x300, 0x1);
}
+
}
#undef IQK_ADDA_REG_NUM
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h
index 53ffb09..9a264c0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h
@@ -27,8 +27,8 @@
*
*****************************************************************************/
-#ifndef __RTL92C_PHY_H__
-#define __RTL92C_PHY_H__
+#ifndef __RTL92C_PHY_COMMON_H__
+#define __RTL92C_PHY_COMMON_H__
#define MAX_PRECMD_CNT 16
#define MAX_RFDEPENDCMD_CNT 16
@@ -39,6 +39,7 @@
#define RT_CANNOT_IO(hw) false
#define HIGHPOWER_RADIOA_ARRAYLEN 22
+#define IQK_ADDA_REG_NUM 16
#define MAX_TOLERANCE 5
#define IQK_DELAY_TIME 1
@@ -56,6 +57,7 @@
#define IQK_ADDA_REG_NUM 16
#define IQK_MAC_REG_NUM 4
+#define IQK_DELAY_TIME 1
#define RF90_PATH_MAX 2
#define CT_OFFSET_MAC_ADDR 0X16
@@ -77,6 +79,7 @@
#define RTL92C_MAX_PATH_NUM 2
#define LLT_LAST_ENTRY_OF_TX_PKT_BUFFER 255
+
enum swchnlcmd_id {
CMDID_END,
CMDID_SET_TXPOWEROWER_LEVEL,
@@ -184,45 +187,41 @@
u32 mcs_original_offset[4][16];
};
-extern u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw,
+u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw,
u32 regaddr, u32 bitmask);
-extern void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw,
+void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw,
u32 regaddr, u32 bitmask, u32 data);
-extern u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
+u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 regaddr,
u32 bitmask);
-extern void rtl92c_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask, u32 data);
-extern bool rtl92c_phy_mac_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_bb_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
+bool rtl92c_phy_mac_config(struct ieee80211_hw *hw);
+bool rtl92c_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
+bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
-extern void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
-extern void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
+void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
long *powerlevel);
-extern void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
-extern bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
+void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
+bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
long power_indbm);
-extern void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw,
+void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw,
u8 operation);
-extern void rtl92c_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
-extern void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
+void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
enum nl80211_channel_type ch_type);
-extern void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
-extern u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
-extern void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
-extern void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw,
+void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
+u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
+void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
+void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw,
u16 beaconinterval);
void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
-extern bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
+bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
u32 rfpath);
-extern bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw,
+bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw,
enum rf_pwrstate rfpwr_state);
void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw);
void rtl92c_phy_set_io(struct ieee80211_hw *hw);
@@ -235,12 +234,25 @@
enum wireless_mode wirelessmode,
long power_indbm);
void _rtl92c_phy_init_bb_rf_register_definition(struct ieee80211_hw *hw);
-static bool _rtl92c_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
- u32 cmdtableidx, u32 cmdtablesz,
- enum swchnlcmd_id cmdid, u32 para1,
- u32 para2, u32 msdelay);
-static bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
- u8 channel, u8 *stage, u8 *step,
- u32 *delay);
+void _rtl92c_phy_set_rf_sleep(struct ieee80211_hw *hw);
+bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+ u8 channel, u8 *stage, u8 *step,
+ u32 *delay);
+u8 rtl92c_bt_rssi_state_change(struct ieee80211_hw *hw);
+u32 _rtl92c_phy_fw_rf_serial_read(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset);
+void _rtl92c_phy_fw_rf_serial_write(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset,
+ u32 data);
+u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset);
+void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset,
+ u32 data);
+bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw);
+void _rtl92c_store_pwrIndex_diffrate_offset(struct ieee80211_hw *hw,
+ u32 regaddr, u32 bitmask,
+ u32 data);
+bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
index 2f577c8..35ff7df 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
@@ -121,19 +121,6 @@
#define CHIP_92C 0x01
#define CHIP_88C 0x00
-/* Add vendor information into chip version definition.
- * Add UMC B-Cut and RTL8723 chip info definition.
- *
- * BIT 7 Reserved
- * BIT 6 UMC BCut
- * BIT 5 Manufacturer(TSMC/UMC)
- * BIT 4 TEST/NORMAL
- * BIT 3 8723 Version
- * BIT 2 8723?
- * BIT 1 1T2R?
- * BIT 0 88C/92C
-*/
-
enum version_8192c {
VERSION_A_CHIP_92C = 0x01,
VERSION_A_CHIP_88C = 0x00,
@@ -280,20 +267,6 @@
u8 *p_cmdbuffer;
};
-static inline u8 _rtl92c_get_chnl_group(u8 chnl)
-{
- u8 group = 0;
-
- if (chnl < 3)
- group = 0;
- else if (chnl < 9)
- group = 1;
- else
- group = 2;
-
- return group;
-}
-
/* NOTE: reference to rtl8192c_rates struct */
static inline int _rtl92c_rate_mapping(struct ieee80211_hw *hw, bool isHT,
u8 desc_rate, bool first_ampdu)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c
index 7d76504..2df33e5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c
@@ -29,10 +29,12 @@
#include "../wifi.h"
#include "../base.h"
+#include "../pci.h"
#include "reg.h"
#include "def.h"
#include "phy.h"
#include "dm.h"
+#include "../rtl8192c/fw_common.h"
void rtl92ce_dm_dynamic_txpower(struct ieee80211_hw *hw)
{
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h
index 36302eb..07dd955 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h
@@ -192,6 +192,7 @@
void rtl92c_dm_check_txpower_tracking(struct ieee80211_hw *hw);
void rtl92c_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw);
void rtl92c_dm_rf_saving(struct ieee80211_hw *hw, u8 bforce_in_normal);
+void rtl92c_dm_bt_coexist(struct ieee80211_hw *hw);
void rtl92ce_dm_dynamic_txpower(struct ieee80211_hw *hw);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 05477f4..4a56138 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -30,12 +30,14 @@
#include "../wifi.h"
#include "../efuse.h"
#include "../base.h"
+#include "../regd.h"
#include "../cam.h"
#include "../ps.h"
#include "../pci.h"
#include "reg.h"
#include "def.h"
#include "phy.h"
+#include "../rtl8192c/fw_common.h"
#include "dm.h"
#include "led.h"
#include "hw.h"
@@ -137,15 +139,6 @@
break;
}
- case HW_VAR_MGT_FILTER:
- *((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP0);
- break;
- case HW_VAR_CTRL_FILTER:
- *((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP1);
- break;
- case HW_VAR_DATA_FILTER:
- *((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP2);
- break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("switch case not process\n"));
@@ -156,6 +149,7 @@
void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
@@ -178,7 +172,7 @@
rate_cfg |= 0x01;
rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
rtl_write_byte(rtlpriv, REG_RRSR + 1,
- (rate_cfg >> 8)&0xff);
+ (rate_cfg >> 8) & 0xff);
while (rate_cfg > 0x1) {
rate_cfg = (rate_cfg >> 1);
rate_index++;
@@ -276,13 +270,19 @@
break;
}
case HW_VAR_AMPDU_FACTOR:{
- u8 regtoset_normal[4] = { 0x41, 0xa8, 0x72, 0xb9 };
+ u8 regtoset_normal[4] = {0x41, 0xa8, 0x72, 0xb9};
+ u8 regtoset_bt[4] = {0x31, 0x74, 0x42, 0x97};
u8 factor_toset;
u8 *p_regtoset = NULL;
u8 index = 0;
- p_regtoset = regtoset_normal;
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ (rtlpcipriv->bt_coexist.bt_coexist_type ==
+ BT_CSR_BC4))
+ p_regtoset = regtoset_bt;
+ else
+ p_regtoset = regtoset_normal;
factor_toset = *((u8 *) val);
if (factor_toset <= 3) {
@@ -317,45 +317,7 @@
}
case HW_VAR_AC_PARAM:{
u8 e_aci = *((u8 *) val);
- u32 u4b_ac_param;
- u16 cw_min = le16_to_cpu(mac->ac[e_aci].cw_min);
- u16 cw_max = le16_to_cpu(mac->ac[e_aci].cw_max);
- u16 tx_op = le16_to_cpu(mac->ac[e_aci].tx_op);
-
- u4b_ac_param = (u32) mac->ac[e_aci].aifs;
- u4b_ac_param |= ((u32)cw_min
- & 0xF) << AC_PARAM_ECW_MIN_OFFSET;
- u4b_ac_param |= ((u32)cw_max &
- 0xF) << AC_PARAM_ECW_MAX_OFFSET;
- u4b_ac_param |= (u32)tx_op << AC_PARAM_TXOP_OFFSET;
-
- RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
- ("queue:%x, ac_param:%x\n", e_aci,
- u4b_ac_param));
-
- switch (e_aci) {
- case AC1_BK:
- rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM,
- u4b_ac_param);
- break;
- case AC0_BE:
- rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM,
- u4b_ac_param);
- break;
- case AC2_VI:
- rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM,
- u4b_ac_param);
- break;
- case AC3_VO:
- rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM,
- u4b_ac_param);
- break;
- default:
- RT_ASSERT(false,
- ("SetHwReg8185(): invalid aci: %d !\n",
- e_aci));
- break;
- }
+ rtl92c_dm_init_edca_turbo(hw);
if (rtlpci->acm_method != eAcmWay2_SW)
rtlpriv->cfg->ops->set_hw_reg(hw,
@@ -526,9 +488,6 @@
case HW_VAR_CORRECT_TSF:{
u8 btype_ibss = ((u8 *) (val))[0];
- /*btype_ibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ?
- 1 : 0;*/
-
if (btype_ibss == true)
_rtl92ce_stop_tx_beacon(hw);
@@ -537,7 +496,7 @@
rtl_write_dword(rtlpriv, REG_TSFTR,
(u32) (mac->tsf & 0xffffffff));
rtl_write_dword(rtlpriv, REG_TSFTR + 4,
- (u32) ((mac->tsf >> 32)&0xffffffff));
+ (u32) ((mac->tsf >> 32) & 0xffffffff));
_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
@@ -547,15 +506,6 @@
break;
}
- case HW_VAR_MGT_FILTER:
- rtl_write_word(rtlpriv, REG_RXFLTMAP0, *(u16 *) val);
- break;
- case HW_VAR_CTRL_FILTER:
- rtl_write_word(rtlpriv, REG_RXFLTMAP1, *(u16 *) val);
- break;
- case HW_VAR_DATA_FILTER:
- rtl_write_word(rtlpriv, REG_RXFLTMAP2, *(u16 *) val);
- break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
"not process\n"));
@@ -679,12 +629,12 @@
rtl92ce_sw_led_on(hw, pLed0);
else
rtl92ce_sw_led_off(hw, pLed0);
-
}
static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
@@ -693,9 +643,22 @@
u16 retry;
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
+ if (rtlpcipriv->bt_coexist.bt_coexistence) {
+ u32 value32;
+ value32 = rtl_read_dword(rtlpriv, REG_APS_FSMCO);
+ value32 |= (SOP_ABG | SOP_AMB | XOP_BTCK);
+ rtl_write_dword(rtlpriv, REG_APS_FSMCO, value32);
+ }
rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F);
+ if (rtlpcipriv->bt_coexist.bt_coexistence) {
+ u32 u4b_tmp = rtl_read_dword(rtlpriv, REG_AFE_XTAL_CTRL);
+
+ u4b_tmp &= (~0x00024800);
+ rtl_write_dword(rtlpriv, REG_AFE_XTAL_CTRL, u4b_tmp);
+ }
+
bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0);
udelay(2);
@@ -726,6 +689,11 @@
rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82);
udelay(2);
+ if (rtlpcipriv->bt_coexist.bt_coexistence) {
+ bytetmp = rtl_read_byte(rtlpriv, REG_AFE_XTAL_CTRL+2) & 0xfd;
+ rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL+2, bytetmp);
+ }
+
rtl_write_word(rtlpriv, REG_CR, 0x2ff);
if (_rtl92ce_llt_table_init(hw) == false)
@@ -793,6 +761,7 @@
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
u8 reg_bw_opmode;
u32 reg_ratr, reg_prsr;
@@ -824,7 +793,11 @@
rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000);
rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504);
- rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ (rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4))
+ rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x97427431);
+ else
+ rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2);
@@ -840,11 +813,20 @@
rtl_write_byte(rtlpriv, REG_PIFS, 0x1C);
rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16);
- rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ (rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4)) {
+ rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+ rtl_write_word(rtlpriv, REG_PROT_MODE_CTRL, 0x0402);
+ } else {
+ rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+ rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+ }
- rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
-
- rtl_write_dword(rtlpriv, REG_FAST_EDCA_CTRL, 0x086666);
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ (rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4))
+ rtl_write_dword(rtlpriv, REG_FAST_EDCA_CTRL, 0x03086666);
+ else
+ rtl_write_dword(rtlpriv, REG_FAST_EDCA_CTRL, 0x086666);
rtl_write_byte(rtlpriv, REG_ACKTO, 0x40);
@@ -948,8 +930,8 @@
}
rtlhal->last_hmeboxnum = 0;
- rtl92ce_phy_mac_config(hw);
- rtl92ce_phy_bb_config(hw);
+ rtl92c_phy_mac_config(hw);
+ rtl92c_phy_bb_config(hw);
rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
rtl92c_phy_rf_config(hw);
rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
@@ -962,15 +944,20 @@
_rtl92ce_hw_configure(hw);
rtl_cam_reset_all_entry(hw);
rtl92ce_enable_hw_security_config(hw);
+
ppsc->rfpwr_state = ERFON;
+
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
_rtl92ce_enable_aspm_back_door(hw);
rtlpriv->intf_ops->enable_aspm(hw);
+
+ rtl8192ce_bt_hw_init(hw);
+
if (ppsc->rfpwr_state == ERFON) {
rtl92c_phy_set_rfpath_switch(hw, 1);
- if (iqk_initialized)
+ if (iqk_initialized) {
rtl92c_phy_iq_calibrate(hw, true);
- else {
+ } else {
rtl92c_phy_iq_calibrate(hw, false);
iqk_initialized = true;
}
@@ -1128,75 +1115,62 @@
return 0;
}
-static void _rtl92ce_set_check_bssid(struct ieee80211_hw *hw,
- enum nl80211_iftype type)
+void rtl92ce_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
- u8 filterout_non_associated_bssid = false;
- switch (type) {
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_STATION:
- filterout_non_associated_bssid = true;
- break;
- case NL80211_IFTYPE_UNSPECIFIED:
- case NL80211_IFTYPE_AP:
- default:
- break;
- }
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
- if (filterout_non_associated_bssid == true) {
+ if (check_bssid == true) {
reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
(u8 *) (®_rcr));
_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
- } else if (filterout_non_associated_bssid == false) {
+ } else if (check_bssid == false) {
reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
_rtl92ce_set_bcn_ctrl_reg(hw, BIT(4), 0);
rtlpriv->cfg->ops->set_hw_reg(hw,
HW_VAR_RCR, (u8 *) (®_rcr));
}
+
}
int rtl92ce_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
if (_rtl92ce_set_media_status(hw, type))
return -EOPNOTSUPP;
- _rtl92ce_set_check_bssid(hw, type);
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92ce_set_check_bssid(hw, true);
+ } else {
+ rtl92ce_set_check_bssid(hw, false);
+ }
+
return 0;
}
+/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
void rtl92ce_set_qos(struct ieee80211_hw *hw, int aci)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 u4b_ac_param;
- u16 cw_min = le16_to_cpu(mac->ac[aci].cw_min);
- u16 cw_max = le16_to_cpu(mac->ac[aci].cw_max);
- u16 tx_op = le16_to_cpu(mac->ac[aci].tx_op);
-
rtl92c_dm_init_edca_turbo(hw);
- u4b_ac_param = (u32) mac->ac[aci].aifs;
- u4b_ac_param |= (u32) ((cw_min & 0xF) << AC_PARAM_ECW_MIN_OFFSET);
- u4b_ac_param |= (u32) ((cw_max & 0xF) << AC_PARAM_ECW_MAX_OFFSET);
- u4b_ac_param |= (u32) (tx_op << AC_PARAM_TXOP_OFFSET);
- RT_TRACE(rtlpriv, COMP_QOS, DBG_DMESG,
- ("queue:%x, ac_param:%x aifs:%x cwmin:%x cwmax:%x txop:%x\n",
- aci, u4b_ac_param, mac->ac[aci].aifs, cw_min,
- cw_max, tx_op));
switch (aci) {
case AC1_BK:
- rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, u4b_ac_param);
+ rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f);
break;
case AC0_BE:
- rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM, u4b_ac_param);
+ /* rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM, u4b_ac_param); */
break;
case AC2_VI:
- rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, u4b_ac_param);
+ rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322);
break;
case AC3_VO:
- rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, u4b_ac_param);
+ rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222);
break;
default:
RT_ASSERT(false, ("invalid aci: %d !\n", aci));
@@ -1227,8 +1201,10 @@
static void _rtl92ce_poweroff_adapter(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
u8 u1b_tmp;
+ u32 u4b_tmp;
rtlpriv->intf_ops->enable_aspm(hw);
rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
@@ -1243,13 +1219,27 @@
rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000);
u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL);
- rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00FF0000 |
- (u1b_tmp << 8));
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ ((rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4) ||
+ (rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC8))) {
+ rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00F30000 |
+ (u1b_tmp << 8));
+ } else {
+ rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00FF0000 |
+ (u1b_tmp << 8));
+ }
rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790);
rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
- rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
+ if (rtlpcipriv->bt_coexist.bt_coexistence) {
+ u4b_tmp = rtl_read_dword(rtlpriv, REG_AFE_XTAL_CTRL);
+ u4b_tmp |= 0x03824800;
+ rtl_write_dword(rtlpriv, REG_AFE_XTAL_CTRL, u4b_tmp);
+ } else {
+ rtl_write_dword(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
+ }
+
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10);
}
@@ -1327,6 +1317,7 @@
RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+
if (add_msr)
rtlpci->irq_mask[0] |= add_msr;
if (rm_msr)
@@ -1582,7 +1573,7 @@
("RTL819X Not boot from eeprom, check it !!"));
}
- RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, ("MAP\n"),
+ RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
hwinfo, HWSET_MAX_SIZE);
eeprom_id = *((u16 *)&hwinfo[0]);
@@ -1610,6 +1601,10 @@
rtlefuse->autoload_failflag,
hwinfo);
+ rtl8192ce_read_bt_coexist_info_from_hwpg(hw,
+ rtlefuse->autoload_failflag,
+ hwinfo);
+
rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
rtlefuse->txpwr_fromeprom = true;
@@ -1618,6 +1613,9 @@
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid));
+ /* set channel paln to world wide 13 */
+ rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+
if (rtlhal->oem_id == RT_CID_DEFAULT) {
switch (rtlefuse->eeprom_oemid) {
case EEPROM_CID_DEFAULT:
@@ -1701,30 +1699,36 @@
} else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
}
-
_rtl92ce_hal_customized_behavior(hw);
}
-void rtl92ce_update_hal_rate_table(struct ieee80211_hw *hw)
+static void rtl92ce_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-
- u32 ratr_value = (u32) mac->basic_rates;
- u8 *mcsrate = mac->mcs;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
u8 ratr_index = 0;
u8 nmode = mac->ht_enable;
- u8 mimo_ps = 1;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
u16 shortgi_rate;
u32 tmp_ratr_value;
u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
enum wireless_mode wirelessmode = mac->mode;
- ratr_value |= ((*(u16 *) (mcsrate))) << 12;
-
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
if (ratr_value & 0x0000000c)
@@ -1738,7 +1742,7 @@
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
nmode = 1;
- if (mimo_ps == 0) {
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
ratr_value &= 0x0007F005;
} else {
u32 ratr_mask;
@@ -1761,10 +1765,19 @@
break;
}
- ratr_value &= 0x0FFFFFFF;
+ if ((rtlpcipriv->bt_coexist.bt_coexistence) &&
+ (rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4) &&
+ (rtlpcipriv->bt_coexist.bt_cur_state) &&
+ (rtlpcipriv->bt_coexist.bt_ant_isolation) &&
+ ((rtlpcipriv->bt_coexist.bt_service == BT_SCO) ||
+ (rtlpcipriv->bt_coexist.bt_service == BT_BUSY)))
+ ratr_value &= 0x0fffcfc0;
+ else
+ ratr_value &= 0x0FFFFFFF;
- if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || (!curtxbw_40mhz &&
- curshortgi_20mhz))) {
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
ratr_value |= 0x10000000;
tmp_ratr_value = (ratr_value >> 12);
@@ -1784,24 +1797,42 @@
("%x\n", rtl_read_dword(rtlpriv, REG_ARFR0)));
}
-void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
+static void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_bitmap = (u32) mac->basic_rates;
- u8 *p_mcsrate = mac->mcs;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
u8 ratr_index;
- u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
- enum wireless_mode wirelessmode = mac->mode;
+ u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ ? 1 : 0;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
bool shortgi = false;
u8 rate_mask[5];
u8 macid = 0;
- u8 mimops = 1;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
- ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
ratr_index = RATR_INX_WIRELESS_B;
@@ -1828,7 +1859,7 @@
case WIRELESS_MODE_N_5G:
ratr_index = RATR_INX_WIRELESS_NGB;
- if (mimops == 0) {
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
if (rssi_level == 1)
ratr_bitmap &= 0x00070000;
else if (rssi_level == 2)
@@ -1892,8 +1923,8 @@
}
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
("ratr_bitmap :%x\n", ratr_bitmap));
- *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) |
- (ratr_index << 28);
+ *(u32 *)&rate_mask = EF4BYTE((ratr_bitmap & 0x0fffffff) |
+ (ratr_index << 28));
rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, ("Rate_index:%x, "
"ratr_val:%x, %x:%x:%x:%x:%x\n",
@@ -1902,6 +1933,20 @@
rate_mask[2], rate_mask[3],
rate_mask[4]));
rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92ce_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92ce_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92ce_update_hal_rate_table(hw, sta);
}
void rtl92ce_update_channel_access_setting(struct ieee80211_hw *hw)
@@ -1919,7 +1964,7 @@
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
}
-bool rtl92ce_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid)
+bool rtl92ce_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
@@ -1929,7 +1974,7 @@
bool actuallyset = false;
unsigned long flag;
- if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
+ if (rtlpci->being_init_adapter)
return false;
if (ppsc->swrf_processing)
@@ -1946,12 +1991,6 @@
cur_rfstate = ppsc->rfpwr_state;
- if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
- RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM)) {
- rtlpriv->intf_ops->disable_aspm(hw);
- RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
- }
-
rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv,
REG_MAC_PINMUX_CFG)&~(BIT(3)));
@@ -1976,38 +2015,13 @@
}
if (actuallyset) {
- if (e_rfpowerstate_toset == ERFON) {
- if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
- RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM)) {
- rtlpriv->intf_ops->disable_aspm(hw);
- RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
- }
- }
-
- spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
- ppsc->rfchange_inprogress = false;
- spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
-
- if (e_rfpowerstate_toset == ERFOFF) {
- if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
- rtlpriv->intf_ops->enable_aspm(hw);
- RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
- }
- }
-
- } else if (e_rfpowerstate_toset == ERFOFF || cur_rfstate == ERFOFF) {
- if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
- RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
-
- if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
- rtlpriv->intf_ops->enable_aspm(hw);
- RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
- }
-
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
ppsc->rfchange_inprogress = false;
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
} else {
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
ppsc->rfchange_inprogress = false;
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
@@ -2086,15 +2100,31 @@
macaddr = cam_const_broad;
entry_id = key_index;
} else {
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv, COMP_SEC,
+ DBG_EMERG,
+ ("Can not find free hw"
+ " security cam entry\n"));
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
key_index = PAIRWISE_KEYIDX;
- entry_id = CAM_PAIRWISE_KEY_POSITION;
is_pairwise = true;
}
}
if (rtlpriv->sec.key_len[key_index] == 0) {
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
- ("delete one entry\n"));
+ ("delete one entry, entry_id is %d\n",
+ entry_id));
+ if (mac->opmode == NL80211_IFTYPE_AP)
+ rtl_cam_del_entry(hw, p_macaddr);
rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
} else {
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
@@ -2146,3 +2176,132 @@
}
}
}
+
+static void rtl8192ce_bt_var_init(struct ieee80211_hw *hw)
+{
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+ rtlpcipriv->bt_coexist.bt_coexistence =
+ rtlpcipriv->bt_coexist.eeprom_bt_coexist;
+ rtlpcipriv->bt_coexist.bt_ant_num =
+ rtlpcipriv->bt_coexist.eeprom_bt_ant_num;
+ rtlpcipriv->bt_coexist.bt_coexist_type =
+ rtlpcipriv->bt_coexist.eeprom_bt_type;
+
+ if (rtlpcipriv->bt_coexist.reg_bt_iso == 2)
+ rtlpcipriv->bt_coexist.bt_ant_isolation =
+ rtlpcipriv->bt_coexist.eeprom_bt_ant_isolation;
+ else
+ rtlpcipriv->bt_coexist.bt_ant_isolation =
+ rtlpcipriv->bt_coexist.reg_bt_iso;
+
+ rtlpcipriv->bt_coexist.bt_radio_shared_type =
+ rtlpcipriv->bt_coexist.eeprom_bt_radio_shared;
+
+ if (rtlpcipriv->bt_coexist.bt_coexistence) {
+
+ if (rtlpcipriv->bt_coexist.reg_bt_sco == 1)
+ rtlpcipriv->bt_coexist.bt_service = BT_OTHER_ACTION;
+ else if (rtlpcipriv->bt_coexist.reg_bt_sco == 2)
+ rtlpcipriv->bt_coexist.bt_service = BT_SCO;
+ else if (rtlpcipriv->bt_coexist.reg_bt_sco == 4)
+ rtlpcipriv->bt_coexist.bt_service = BT_BUSY;
+ else if (rtlpcipriv->bt_coexist.reg_bt_sco == 5)
+ rtlpcipriv->bt_coexist.bt_service = BT_OTHERBUSY;
+ else
+ rtlpcipriv->bt_coexist.bt_service = BT_IDLE;
+
+ rtlpcipriv->bt_coexist.bt_edca_ul = 0;
+ rtlpcipriv->bt_coexist.bt_edca_dl = 0;
+ rtlpcipriv->bt_coexist.bt_rssi_state = 0xff;
+ }
+}
+
+void rtl8192ce_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
+ bool auto_load_fail, u8 *hwinfo)
+{
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+ u8 value;
+
+ if (!auto_load_fail) {
+ rtlpcipriv->bt_coexist.eeprom_bt_coexist =
+ ((hwinfo[RF_OPTION1] & 0xe0) >> 5);
+ value = hwinfo[RF_OPTION4];
+ rtlpcipriv->bt_coexist.eeprom_bt_type = ((value & 0xe) >> 1);
+ rtlpcipriv->bt_coexist.eeprom_bt_ant_num = (value & 0x1);
+ rtlpcipriv->bt_coexist.eeprom_bt_ant_isolation =
+ ((value & 0x10) >> 4);
+ rtlpcipriv->bt_coexist.eeprom_bt_radio_shared =
+ ((value & 0x20) >> 5);
+ } else {
+ rtlpcipriv->bt_coexist.eeprom_bt_coexist = 0;
+ rtlpcipriv->bt_coexist.eeprom_bt_type = BT_2WIRE;
+ rtlpcipriv->bt_coexist.eeprom_bt_ant_num = ANT_X2;
+ rtlpcipriv->bt_coexist.eeprom_bt_ant_isolation = 0;
+ rtlpcipriv->bt_coexist.eeprom_bt_radio_shared = BT_RADIO_SHARED;
+ }
+
+ rtl8192ce_bt_var_init(hw);
+}
+
+void rtl8192ce_bt_reg_init(struct ieee80211_hw *hw)
+{
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+ /* 0:Low, 1:High, 2:From Efuse. */
+ rtlpcipriv->bt_coexist.reg_bt_iso = 2;
+ /* 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter. */
+ rtlpcipriv->bt_coexist.reg_bt_sco = 3;
+ /* 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. */
+ rtlpcipriv->bt_coexist.reg_bt_sco = 0;
+}
+
+
+void rtl8192ce_bt_hw_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
+
+ u8 u1_tmp;
+
+ if (rtlpcipriv->bt_coexist.bt_coexistence &&
+ ((rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC4) ||
+ rtlpcipriv->bt_coexist.bt_coexist_type == BT_CSR_BC8)) {
+
+ if (rtlpcipriv->bt_coexist.bt_ant_isolation)
+ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG, 0xa0);
+
+ u1_tmp = rtl_read_byte(rtlpriv, 0x4fd) &
+ BIT_OFFSET_LEN_MASK_32(0, 1);
+ u1_tmp = u1_tmp |
+ ((rtlpcipriv->bt_coexist.bt_ant_isolation == 1) ?
+ 0 : BIT_OFFSET_LEN_MASK_32(1, 1)) |
+ ((rtlpcipriv->bt_coexist.bt_service == BT_SCO) ?
+ 0 : BIT_OFFSET_LEN_MASK_32(2, 1));
+ rtl_write_byte(rtlpriv, 0x4fd, u1_tmp);
+
+ rtl_write_dword(rtlpriv, REG_BT_COEX_TABLE+4, 0xaaaa9aaa);
+ rtl_write_dword(rtlpriv, REG_BT_COEX_TABLE+8, 0xffbd0040);
+ rtl_write_dword(rtlpriv, REG_BT_COEX_TABLE+0xc, 0x40000010);
+
+ /* Config to 1T1R. */
+ if (rtlphy->rf_type == RF_1T1R) {
+ u1_tmp = rtl_read_byte(rtlpriv, ROFDM0_TRXPATHENABLE);
+ u1_tmp &= ~(BIT_OFFSET_LEN_MASK_32(1, 1));
+ rtl_write_byte(rtlpriv, ROFDM0_TRXPATHENABLE, u1_tmp);
+
+ u1_tmp = rtl_read_byte(rtlpriv, ROFDM1_TRXPATHENABLE);
+ u1_tmp &= ~(BIT_OFFSET_LEN_MASK_32(1, 1));
+ rtl_write_byte(rtlpriv, ROFDM1_TRXPATHENABLE, u1_tmp);
+ }
+ }
+}
+
+void rtl92ce_suspend(struct ieee80211_hw *hw)
+{
+}
+
+void rtl92ce_resume(struct ieee80211_hw *hw)
+{
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
index a3dfdb6..07dbe3e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
@@ -30,7 +30,18 @@
#ifndef __RTL92CE_HW_H__
#define __RTL92CE_HW_H__
-#define H2C_RA_MASK 6
+static inline u8 _rtl92c_get_chnl_group(u8 chnl)
+{
+ u8 group;
+
+ if (chnl < 3)
+ group = 0;
+ else if (chnl < 9)
+ group = 1;
+ else
+ group = 2;
+ return group;
+}
void rtl92ce_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
void rtl92ce_read_eeprom_info(struct ieee80211_hw *hw);
@@ -41,28 +52,27 @@
void rtl92ce_enable_interrupt(struct ieee80211_hw *hw);
void rtl92ce_disable_interrupt(struct ieee80211_hw *hw);
int rtl92ce_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type);
+void rtl92ce_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
void rtl92ce_set_qos(struct ieee80211_hw *hw, int aci);
void rtl92ce_set_beacon_related_registers(struct ieee80211_hw *hw);
void rtl92ce_set_beacon_interval(struct ieee80211_hw *hw);
void rtl92ce_update_interrupt_mask(struct ieee80211_hw *hw,
u32 add_msr, u32 rm_msr);
void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
-void rtl92ce_update_hal_rate_table(struct ieee80211_hw *hw);
-void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level);
+void rtl92ce_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level);
void rtl92ce_update_channel_access_setting(struct ieee80211_hw *hw);
bool rtl92ce_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid);
void rtl92ce_enable_hw_security_config(struct ieee80211_hw *hw);
void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
u8 *p_macaddr, bool is_group, u8 enc_algo,
bool is_wepkey, bool clear_all);
-bool _rtl92ce_phy_config_mac_with_headerfile(struct ieee80211_hw *hw);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
-void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
-int rtl92c_download_fw(struct ieee80211_hw *hw);
-void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
-void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
- u8 element_id, u32 cmd_len, u8 *p_cmdbuffer);
-bool rtl92ce_phy_mac_config(struct ieee80211_hw *hw);
+
+void rtl8192ce_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
+ bool autoload_fail, u8 *hwinfo);
+void rtl8192ce_bt_reg_init(struct ieee80211_hw *hw);
+void rtl8192ce_bt_hw_init(struct ieee80211_hw *hw);
+void rtl92ce_suspend(struct ieee80211_hw *hw);
+void rtl92ce_resume(struct ieee80211_hw *hw);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/led.c b/drivers/net/wireless/rtlwifi/rtl8192ce/led.c
index 7b1da8d..9dd1ed7 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/led.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/led.c
@@ -32,6 +32,14 @@
#include "reg.h"
#include "led.h"
+static void _rtl92ce_init_led(struct ieee80211_hw *hw,
+ struct rtl_led *pled, enum rtl_led_pin ledpin)
+{
+ pled->hw = hw;
+ pled->ledpin = ledpin;
+ pled->ledon = false;
+}
+
void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
{
u8 ledcfg;
@@ -97,13 +105,12 @@
void rtl92ce_init_sw_leds(struct ieee80211_hw *hw)
{
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ _rtl92ce_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0);
+ _rtl92ce_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1);
}
-void rtl92ce_deinit_sw_leds(struct ieee80211_hw *hw)
-{
-}
-
-void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
+static void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
enum led_ctl_mode ledaction)
{
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
@@ -138,7 +145,7 @@
ledaction == LED_CTL_POWER_ON)) {
return;
}
- RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n",
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d.\n",
ledaction));
_rtl92ce_sw_led_control(hw, ledaction);
}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/led.h b/drivers/net/wireless/rtlwifi/rtl8192ce/led.h
index 10da301..7dfccea 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/led.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/led.h
@@ -31,11 +31,8 @@
#define __RTL92CE_LED_H__
void rtl92ce_init_sw_leds(struct ieee80211_hw *hw);
-void rtl92ce_deinit_sw_leds(struct ieee80211_hw *hw);
void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
void rtl92ce_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);
-void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
- enum led_ctl_mode ledaction);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
index d0541e8..73ae8a4 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -38,7 +38,9 @@
#include "dm.h"
#include "table.h"
-u32 rtl92ce_phy_query_rf_reg(struct ieee80211_hw *hw,
+static bool _rtl92c_phy_config_mac_with_headerfile(struct ieee80211_hw *hw);
+
+u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 regaddr, u32 bitmask)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -73,9 +75,47 @@
return readback_value;
}
+bool rtl92c_phy_mac_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ bool is92c = IS_92C_SERIAL(rtlhal->version);
+ bool rtstatus = _rtl92c_phy_config_mac_with_headerfile(hw);
+
+ if (is92c)
+ rtl_write_byte(rtlpriv, 0x14, 0x71);
+ return rtstatus;
+}
+
+bool rtl92c_phy_bb_config(struct ieee80211_hw *hw)
+{
+ bool rtstatus = true;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 regval;
+ u32 regvaldw;
+ u8 reg_hwparafile = 1;
+
+ _rtl92c_phy_init_bb_rf_register_definition(hw);
+ regval = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN,
+ regval | BIT(13) | BIT(0) | BIT(1));
+ rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x83);
+ rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL + 1, 0xdb);
+ rtl_write_byte(rtlpriv, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN,
+ FEN_PPLL | FEN_PCIEA | FEN_DIO_PCIE |
+ FEN_BB_GLB_RSTn | FEN_BBRSTB);
+ rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0x80);
+ regvaldw = rtl_read_dword(rtlpriv, REG_LEDCFG0);
+ rtl_write_dword(rtlpriv, REG_LEDCFG0, regvaldw | BIT(23));
+ if (reg_hwparafile == 1)
+ rtstatus = _rtl92c_phy_bb8192c_config_parafile(hw);
+ return rtstatus;
+}
+
void rtl92ce_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath,
- u32 regaddr, u32 bitmask, u32 data)
+ enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -121,45 +161,7 @@
bitmask, data, rfpath));
}
-bool rtl92ce_phy_mac_config(struct ieee80211_hw *hw)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- bool is92c = IS_92C_SERIAL(rtlhal->version);
- bool rtstatus = _rtl92ce_phy_config_mac_with_headerfile(hw);
-
- if (is92c)
- rtl_write_byte(rtlpriv, 0x14, 0x71);
- return rtstatus;
-}
-
-bool rtl92ce_phy_bb_config(struct ieee80211_hw *hw)
-{
- bool rtstatus = true;
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- u16 regval;
- u32 regvaldw;
- u8 reg_hwparafile = 1;
-
- _rtl92c_phy_init_bb_rf_register_definition(hw);
- regval = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
- rtl_write_word(rtlpriv, REG_SYS_FUNC_EN,
- regval | BIT(13) | BIT(0) | BIT(1));
- rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x83);
- rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL + 1, 0xdb);
- rtl_write_byte(rtlpriv, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB);
- rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN,
- FEN_PPLL | FEN_PCIEA | FEN_DIO_PCIE |
- FEN_BB_GLB_RSTn | FEN_BBRSTB);
- rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0x80);
- regvaldw = rtl_read_dword(rtlpriv, REG_LEDCFG0);
- rtl_write_dword(rtlpriv, REG_LEDCFG0, regvaldw | BIT(23));
- if (reg_hwparafile == 1)
- rtstatus = _rtl92c_phy_bb8192c_config_parafile(hw);
- return rtstatus;
-}
-
-bool _rtl92ce_phy_config_mac_with_headerfile(struct ieee80211_hw *hw)
+static bool _rtl92c_phy_config_mac_with_headerfile(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u32 i;
@@ -177,7 +179,7 @@
}
bool _rtl92ce_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
- u8 configtype)
+ u8 configtype)
{
int i;
u32 *phy_regarray_table;
@@ -236,7 +238,7 @@
}
bool _rtl92ce_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
- u8 configtype)
+ u8 configtype)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
int i;
@@ -274,7 +276,7 @@
return true;
}
-bool rtl92ce_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
+bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath)
{
@@ -364,74 +366,6 @@
return true;
}
-void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
- struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u8 reg_bw_opmode;
- u8 reg_prsr_rsc;
-
- RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
- ("Switch to %s bandwidth\n",
- rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
- "20MHz" : "40MHz"))
-
- if (is_hal_stop(rtlhal))
- return;
-
- reg_bw_opmode = rtl_read_byte(rtlpriv, REG_BWOPMODE);
- reg_prsr_rsc = rtl_read_byte(rtlpriv, REG_RRSR + 2);
-
- switch (rtlphy->current_chan_bw) {
- case HT_CHANNEL_WIDTH_20:
- reg_bw_opmode |= BW_OPMODE_20MHZ;
- rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
- break;
-
- case HT_CHANNEL_WIDTH_20_40:
- reg_bw_opmode &= ~BW_OPMODE_20MHZ;
- rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
-
- reg_prsr_rsc =
- (reg_prsr_rsc & 0x90) | (mac->cur_40_prime_sc << 5);
- rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
- break;
-
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
- break;
- }
-
- switch (rtlphy->current_chan_bw) {
- case HT_CHANNEL_WIDTH_20:
- rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
- rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
- rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 1);
- break;
- case HT_CHANNEL_WIDTH_20_40:
- rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
- rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
- rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
- (mac->cur_40_prime_sc >> 1));
- rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
- rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 0);
- rtl_set_bbreg(hw, 0x818, (BIT(26) | BIT(27)),
- (mac->cur_40_prime_sc ==
- HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
- break;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
- break;
- }
- rtl92c_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
- rtlphy->set_bwmode_inprogress = false;
- RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
-}
-
void _rtl92ce_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
{
u8 tmpreg;
@@ -477,6 +411,36 @@
}
}
+static void _rtl92ce_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+ u32 u4b_tmp;
+ u8 delay = 5;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
+ rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
+ rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
+ u4b_tmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, RFREG_OFFSET_MASK);
+ while (u4b_tmp != 0 && delay > 0) {
+ rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x0);
+ rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
+ rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
+ u4b_tmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, RFREG_OFFSET_MASK);
+ delay--;
+ }
+ if (delay == 0) {
+ rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x00);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3);
+ rtl_write_byte(rtlpriv, REG_TXPAUSE, 0x00);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+ ("Switch RF timeout !!!.\n"));
+ return;
+ }
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+ rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x22);
+}
+
static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
enum rf_pwrstate rfpwr_state)
{
@@ -523,33 +487,6 @@
break;
}
case ERFOFF:{
- for (queue_id = 0, i = 0;
- queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
- ring = &pcipriv->dev.tx_ring[queue_id];
- if (skb_queue_len(&ring->queue) == 0 ||
- queue_id == BEACON_QUEUE) {
- queue_id++;
- continue;
- } else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- ("eRf Off/Sleep: %d times "
- "TcbBusyQueue[%d] "
- "=%d before doze!\n", (i + 1),
- queue_id,
- skb_queue_len(&ring->queue)));
- udelay(10);
- i++;
- }
- if (i >= MAX_DOZE_WAITING_TIMES_9x) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- ("\nERFOFF: %d times "
- "TcbBusyQueue[%d] = %d !\n",
- MAX_DOZE_WAITING_TIMES_9x,
- queue_id,
- skb_queue_len(&ring->queue)));
- break;
- }
- }
if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
("IPS Set eRf nic disable\n"));
@@ -581,6 +518,7 @@
"TcbBusyQueue[%d] =%d before "
"doze!\n", (i + 1), queue_id,
skb_queue_len(&ring->queue)));
+
udelay(10);
i++;
}
@@ -599,7 +537,7 @@
jiffies_to_msecs(jiffies -
ppsc->last_awake_jiffies)));
ppsc->last_sleep_jiffies = jiffies;
- _rtl92c_phy_set_rf_sleep(hw);
+ _rtl92ce_phy_set_rf_sleep(hw);
break;
}
default:
@@ -614,10 +552,11 @@
return bresult;
}
-bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
+bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw,
enum rf_pwrstate rfpwr_state)
{
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
bool bresult = false;
if (rfpwr_state == ppsc->rfpwr_state)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
index a37267e..ad58085 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
@@ -39,6 +39,7 @@
#define RT_CANNOT_IO(hw) false
#define HIGHPOWER_RADIOA_ARRAYLEN 22
+#define IQK_ADDA_REG_NUM 16
#define MAX_TOLERANCE 5
#define IQK_DELAY_TIME 1
@@ -56,6 +57,8 @@
#define IQK_ADDA_REG_NUM 16
#define IQK_MAC_REG_NUM 4
+#define IQK_DELAY_TIME 1
+
#define RF90_PATH_MAX 2
#define CT_OFFSET_MAC_ADDR 0X16
@@ -76,7 +79,7 @@
#define CT_OFFSET_CUSTOMER_ID 0x7F
#define RTL92C_MAX_PATH_NUM 2
-#define LLT_LAST_ENTRY_OF_TX_PKT_BUFFER 255
+
enum swchnlcmd_id {
CMDID_END,
CMDID_SET_TXPOWEROWER_LEVEL,
@@ -184,43 +187,44 @@
u32 mcs_original_offset[4][16];
};
-extern u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw,
+bool rtl92c_phy_bb_config(struct ieee80211_hw *hw);
+u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw,
u32 regaddr, u32 bitmask);
-extern void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw,
+void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw,
u32 regaddr, u32 bitmask, u32 data);
-extern u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
+u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 regaddr,
u32 bitmask);
extern void rtl92ce_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask, u32 data);
-extern bool rtl92c_phy_mac_config(struct ieee80211_hw *hw);
+ enum radio_path rfpath, u32 regaddr,
+ u32 bitmask, u32 data);
+bool rtl92c_phy_mac_config(struct ieee80211_hw *hw);
bool rtl92ce_phy_bb_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
+bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
+bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
-extern void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
-extern void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
+void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
long *powerlevel);
-extern void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
-extern bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
+void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
+bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
long power_indbm);
-extern void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw,
+void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw,
u8 operation);
-extern void rtl92c_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
-extern void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
+void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
enum nl80211_channel_type ch_type);
-extern void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
-extern u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
-extern void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
-extern void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw,
+void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
+u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
+void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
+void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw,
u16 beaconinterval);
void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);
+void _rtl92ce_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t);
void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
-extern bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
+bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
u32 rfpath);
bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
@@ -237,9 +241,6 @@
void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 offset,
u32 data);
-void _rtl92c_store_pwrIndex_diffrate_offset(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask,
- u32 data);
void _rtl92c_phy_fw_rf_serial_write(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 offset,
u32 data);
@@ -250,5 +251,11 @@
void _rtl92c_phy_init_bb_rf_register_definition(struct ieee80211_hw *hw);
bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw);
void _rtl92c_phy_set_rf_sleep(struct ieee80211_hw *hw);
+bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpwr_state);
+bool _rtl92ce_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
+ u8 configtype);
+bool _rtl92ce_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
+ u8 configtype);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
index b0868a6..598cecc 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
@@ -72,6 +72,7 @@
#define REG_GPIO_IO_SEL_2 0x0062
/* RTL8723 WIFI/BT/GPS Multi-Function control source. */
#define REG_MULTI_FUNC_CTRL 0x0068
+
#define REG_MCUFWDL 0x0080
#define REG_HMEBOX_EXT_0 0x0088
@@ -542,7 +543,7 @@
#define IMR_OCPINT BIT(1)
#define IMR_WLANOFF BIT(0)
-#define HWSET_MAX_SIZE 128
+#define EFUSE_REAL_CONTENT_LEN 512
#define EEPROM_DEFAULT_TSSI 0x0
#define EEPROM_DEFAULT_TXPOWERDIFF 0x0
@@ -656,6 +657,7 @@
#define STOPBE BIT(1)
#define STOPBK BIT(0)
+#define RCR_APPFCS BIT(31)
#define RCR_APP_FCS BIT(31)
#define RCR_APP_MIC BIT(30)
#define RCR_APP_ICV BIT(29)
@@ -688,6 +690,7 @@
#define REG_USB_INFO 0xFE17
#define REG_USB_SPECIAL_OPTION 0xFE55
+
#define REG_USB_DMA_AGG_TO 0xFE5B
#define REG_USB_AGG_TO 0xFE5C
#define REG_USB_AGG_TH 0xFE5D
@@ -775,7 +778,6 @@
#define BOOT_FROM_EEPROM BIT(4)
#define EEPROM_EN BIT(5)
-#define EEPROMSEL BOOT_FROM_EEPROM
#define AFE_BGEN BIT(0)
#define AFE_MBEN BIT(1)
@@ -901,28 +903,7 @@
#define BD_PKG_SEL BIT(25)
#define BD_HCI_SEL BIT(26)
#define TYPE_ID BIT(27)
-
-/* REG_GPIO_OUTSTS (For RTL8723 only) */
-#define EFS_HCI_SEL (BIT(0)|BIT(1))
-#define PAD_HCI_SEL (BIT(2)|BIT(3))
-#define HCI_SEL (BIT(4)|BIT(5))
-#define PKG_SEL_HCI BIT(6)
-#define FEN_GPS BIT(7)
-#define FEN_BT BIT(8)
-#define FEN_WL BIT(9)
-#define FEN_PCI BIT(10)
-#define FEN_USB BIT(11)
-#define BTRF_HWPDN_N BIT(12)
-#define WLRF_HWPDN_N BIT(13)
-#define PDN_BT_N BIT(14)
-#define PDN_GPS_N BIT(15)
-#define BT_CTL_HWPDN BIT(16)
-#define GPS_CTL_HWPDN BIT(17)
-#define PPHY_SUSB BIT(20)
-#define UPHY_SUSB BIT(21)
-#define PCI_SUSEN BIT(22)
-#define USB_SUSEN BIT(23)
-#define RF_RL_ID (BIT(31) | BIT(30) | BIT(29) | BIT(28))
+#define RF_RL_ID (BIT(31) | BIT(30) | BIT(29) | BIT(28))
#define CHIP_VER_RTL_MASK 0xF000
#define CHIP_VER_RTL_SHIFT 12
@@ -1077,6 +1058,7 @@
#define _RARF_RC8(x) (((x) & 0x1F) << 24)
#define AC_PARAM_TXOP_OFFSET 16
+#define AC_PARAM_TXOP_LIMIT_OFFSET 16
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
@@ -1221,34 +1203,12 @@
#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_LOAD 1
-#define HWSET_MAX_SIZE_92S HWSET_MAX_SIZE
+#define HWSET_MAX_SIZE_92S HWSET_MAX_SIZE
+
+#define WL_HWPDN_EN BIT(0)
#define HAL_8192C_HW_GPIO_WPS_BIT BIT(2)
-/* REG_MULTI_FUNC_CTRL(For RTL8723 Only) */
-/* Enable GPIO[9] as WiFi HW PDn source */
-#define WL_HWPDN_EN BIT(0)
-/* WiFi HW PDn polarity control */
-#define WL_HWPDN_SL BIT(1)
-/* WiFi function enable */
-#define WL_FUNC_EN BIT(2)
-/* Enable GPIO[9] as WiFi RF HW PDn source */
-#define WL_HWROF_EN BIT(3)
-/* Enable GPIO[11] as BT HW PDn source */
-#define BT_HWPDN_EN BIT(16)
-/* BT HW PDn polarity control */
-#define BT_HWPDN_SL BIT(17)
-/* BT function enable */
-#define BT_FUNC_EN BIT(18)
-/* Enable GPIO[11] as BT/GPS RF HW PDn source */
-#define BT_HWROF_EN BIT(19)
-/* Enable GPIO[10] as GPS HW PDn source */
-#define GPS_HWPDN_EN BIT(20)
-/* GPS HW PDn polarity control */
-#define GPS_HWPDN_SL BIT(21)
-/* GPS function enable */
-#define GPS_FUNC_EN BIT(22)
-
#define RPMAC_RESET 0x100
#define RPMAC_TXSTART 0x104
#define RPMAC_TXLEGACYSIG 0x108
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
index 669b116..90d0f2c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
@@ -34,9 +34,9 @@
#include "rf.h"
#include "dm.h"
-static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
+static bool _rtl92ce_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
-void rtl92c_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+void rtl92ce_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -62,7 +62,7 @@
}
void rtl92ce_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel)
+ u8 *ppowerlevel)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -128,8 +128,7 @@
tmpval = tx_agc[RF90_PATH_A] >> 8;
- if (mac->mode == WIRELESS_MODE_B)
- tmpval = tmpval & 0xff00ffff;
+ tmpval = tmpval & 0xff00ffff;
rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
@@ -202,7 +201,7 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
- u8 i, chnlgroup, pwr_diff_limit[4];
+ u8 i, chnlgroup = 0, pwr_diff_limit[4];
u32 writeVal, customer_limit, rf;
for (rf = 0; rf < 2; rf++) {
@@ -440,16 +439,17 @@
else
rtlphy->num_total_rfpath = 2;
- return _rtl92c_phy_rf6052_config_parafile(hw);
+ return _rtl92ce_phy_rf6052_config_parafile(hw);
+
}
-static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
+static bool _rtl92ce_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
- u32 u4_regvalue;
+ u32 u4_regvalue = 0;
u8 rfpath;
- bool rtstatus;
+ bool rtstatus = true;
struct bb_reg_def *pphyreg;
for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
@@ -484,12 +484,12 @@
switch (rfpath) {
case RF90_PATH_A:
- rtstatus = rtl92ce_phy_config_rf_with_headerfile(hw,
- (enum radio_path) rfpath);
+ rtstatus = rtl92c_phy_config_rf_with_headerfile(hw,
+ (enum radio_path)rfpath);
break;
case RF90_PATH_B:
- rtstatus = rtl92ce_phy_config_rf_with_headerfile(hw,
- (enum radio_path) rfpath);
+ rtstatus = rtl92c_phy_config_rf_with_headerfile(hw,
+ (enum radio_path)rfpath);
break;
case RF90_PATH_C:
break;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h
index 3aa520c..39ff036 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h
@@ -34,14 +34,11 @@
#define RF6052_MAX_REG 0x3F
#define RF6052_MAX_PATH 2
-extern void rtl92c_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
- u8 bandwidth);
-extern void rtl92c_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel);
-extern void rtl92c_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel, u8 channel);
-bool rtl92ce_phy_rf6052_config(struct ieee80211_hw *hw);
-bool rtl92ce_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
- enum radio_path rfpath);
-
+extern void rtl92ce_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+ u8 bandwidth);
+extern void rtl92ce_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel);
+extern void rtl92ce_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel, u8 channel);
+extern bool rtl92ce_phy_rf6052_config(struct ieee80211_hw *hw);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
index b1cc4d4..390bbb5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -42,10 +42,58 @@
#include "trx.h"
#include "led.h"
+static void rtl92c_init_aspm_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ /*close ASPM for AMD defaultly */
+ rtlpci->const_amdpci_aspm = 0;
+
+ /*
+ * ASPM PS mode.
+ * 0 - Disable ASPM,
+ * 1 - Enable ASPM without Clock Req,
+ * 2 - Enable ASPM with Clock Req,
+ * 3 - Alwyas Enable ASPM with Clock Req,
+ * 4 - Always Enable ASPM without Clock Req.
+ * set defult to RTL8192CE:3 RTL8192E:2
+ * */
+ rtlpci->const_pci_aspm = 3;
+
+ /*Setting for PCI-E device */
+ rtlpci->const_devicepci_aspm_setting = 0x03;
+
+ /*Setting for PCI-E bridge */
+ rtlpci->const_hostpci_aspm_setting = 0x02;
+
+ /*
+ * In Hw/Sw Radio Off situation.
+ * 0 - Default,
+ * 1 - From ASPM setting without low Mac Pwr,
+ * 2 - From ASPM setting with low Mac Pwr,
+ * 3 - Bus D3
+ * set default to RTL8192CE:0 RTL8192SE:2
+ */
+ rtlpci->const_hwsw_rfoff_d3 = 0;
+
+ /*
+ * This setting works for those device with
+ * backdoor ASPM setting such as EPHY setting.
+ * 0 - Not support ASPM,
+ * 1 - Support ASPM,
+ * 2 - According to chipset.
+ */
+ rtlpci->const_support_pciaspm = 1;
+}
+
int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
{
+ int err;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ const struct firmware *firmware;
+
+ rtl8192ce_bt_reg_init(hw);
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->dm.dm_flag = 0;
@@ -53,7 +101,12 @@
rtlpriv->dm.thermalvalue = 0;
rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13);
- rtlpci->receive_config = (RCR_APP_FCS |
+ /* compatible 5G band 88ce just 2.4G band & smsp */
+ rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+ rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
+ rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+ rtlpci->receive_config = (RCR_APPFCS |
RCR_AMF |
RCR_ADF |
RCR_APP_MIC |
@@ -76,13 +129,49 @@
rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD | 0);
- rtlpriv->rtlhal.pfirmware = (u8 *) vmalloc(0x4000);
+ /* for LPS & IPS */
+ rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+ rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+ rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+ rtlpriv->psc.reg_fwctrl_lps = 3;
+ rtlpriv->psc.reg_max_lps_awakeintvl = 5;
+ /* for ASPM, you can close aspm through
+ * set const_support_pciaspm = 0 */
+ rtl92c_init_aspm_vars(hw);
+
+ if (rtlpriv->psc.reg_fwctrl_lps == 1)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+ else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+ else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+ /* for firmware buf */
+ rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Can't alloc buffer for fw.\n"));
return 1;
}
+ /* request fw */
+ err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
+ rtlpriv->io.dev);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Failed to request firmware!\n"));
+ return 1;
+ }
+ if (firmware->size > 0x4000) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Firmware is too big!\n"));
+ release_firmware(firmware);
+ return 1;
+ }
+ memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size);
+ rtlpriv->rtlhal.fwsize = firmware->size;
+ release_firmware(firmware);
+
return 0;
}
@@ -103,17 +192,19 @@
.interrupt_recognized = rtl92ce_interrupt_recognized,
.hw_init = rtl92ce_hw_init,
.hw_disable = rtl92ce_card_disable,
+ .hw_suspend = rtl92ce_suspend,
+ .hw_resume = rtl92ce_resume,
.enable_interrupt = rtl92ce_enable_interrupt,
.disable_interrupt = rtl92ce_disable_interrupt,
.set_network_type = rtl92ce_set_network_type,
+ .set_chk_bssid = rtl92ce_set_check_bssid,
.set_qos = rtl92ce_set_qos,
.set_bcn_reg = rtl92ce_set_beacon_related_registers,
.set_bcn_intv = rtl92ce_set_beacon_interval,
.update_interrupt_mask = rtl92ce_update_interrupt_mask,
.get_hw_reg = rtl92ce_get_hw_reg,
.set_hw_reg = rtl92ce_set_hw_reg,
- .update_rate_table = rtl92ce_update_hal_rate_table,
- .update_rate_mask = rtl92ce_update_hal_rate_mask,
+ .update_rate_tbl = rtl92ce_update_hal_rate_tbl,
.fill_tx_desc = rtl92ce_tx_fill_desc,
.fill_tx_cmddesc = rtl92ce_tx_fill_cmddesc,
.query_rx_desc = rtl92ce_rx_query_desc,
@@ -123,7 +214,7 @@
.switch_channel = rtl92c_phy_sw_chnl,
.dm_watchdog = rtl92c_dm_watchdog,
.scan_operation_backup = rtl92c_phy_scan_operation_backup,
- .set_rf_power_state = rtl92ce_phy_set_rf_power_state,
+ .set_rf_power_state = rtl92c_phy_set_rf_power_state,
.led_control = rtl92ce_led_control,
.set_desc = rtl92ce_set_desc,
.get_desc = rtl92ce_get_desc,
@@ -131,27 +222,29 @@
.enable_hw_sec = rtl92ce_enable_hw_security_config,
.set_key = rtl92ce_set_key,
.init_sw_leds = rtl92ce_init_sw_leds,
- .deinit_sw_leds = rtl92ce_deinit_sw_leds,
.get_bbreg = rtl92c_phy_query_bb_reg,
.set_bbreg = rtl92c_phy_set_bb_reg,
- .get_rfreg = rtl92ce_phy_query_rf_reg,
.set_rfreg = rtl92ce_phy_set_rf_reg,
- .cmd_send_packet = _rtl92c_cmd_send_packet,
+ .get_rfreg = rtl92c_phy_query_rf_reg,
.phy_rf6052_config = rtl92ce_phy_rf6052_config,
.phy_rf6052_set_cck_txpower = rtl92ce_phy_rf6052_set_cck_txpower,
.phy_rf6052_set_ofdm_txpower = rtl92ce_phy_rf6052_set_ofdm_txpower,
.config_bb_with_headerfile = _rtl92ce_phy_config_bb_with_headerfile,
.config_bb_with_pgheaderfile = _rtl92ce_phy_config_bb_with_pgheaderfile,
.phy_lc_calibrate = _rtl92ce_phy_lc_calibrate,
- .phy_set_bw_mode_callback = rtl92ce_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92ce_dm_dynamic_txpower,
};
static struct rtl_mod_params rtl92ce_mod_params = {
- .sw_crypto = 0,
+ .sw_crypto = false,
+ .inactiveps = true,
+ .swctrl_lps = false,
+ .fwctrl_lps = true,
};
static struct rtl_hal_cfg rtl92ce_hal_cfg = {
+ .bar_id = 2,
+ .write_readback = true,
.name = "rtl92c_pci",
.fw_name = "rtlwifi/rtl8192cfw.bin",
.ops = &rtl8192ce_hal_ops,
@@ -175,6 +268,8 @@
.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
.maps[EFUSE_ANA8M] = EFUSE_ANA8M,
.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+ .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+ .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
.maps[RWCAM] = REG_CAMCMD,
.maps[WCAMI] = REG_CAMWRITE,
@@ -239,7 +334,7 @@
.maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
};
-static struct pci_device_id rtl92ce_pci_ids[] __devinitdata = {
+DEFINE_PCI_DEVICE_TABLE(rtl92ce_pci_ids) = {
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8191, rtl92ce_hal_cfg)},
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8178, rtl92ce_hal_cfg)},
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8177, rtl92ce_hal_cfg)},
@@ -257,7 +352,13 @@
MODULE_FIRMWARE("rtlwifi/rtl8192cfw.bin");
module_param_named(swenc, rtl92ce_mod_params.sw_crypto, bool, 0444);
+module_param_named(ips, rtl92ce_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl92ce_mod_params.swctrl_lps, bool, 0444);
+module_param_named(fwlps, rtl92ce_mod_params.fwctrl_lps, bool, 0444);
MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
+MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
+MODULE_PARM_DESC(fwlps, "using linked fw control power save "
+ "(default 1 is open)\n");
static struct pci_driver rtl92ce_driver = {
.name = KBUILD_MODNAME,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h
index 36e6576..b7dc326 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h
@@ -33,19 +33,9 @@
int rtl92c_init_sw_vars(struct ieee80211_hw *hw);
void rtl92c_deinit_sw_vars(struct ieee80211_hw *hw);
void rtl92c_init_var_map(struct ieee80211_hw *hw);
-bool _rtl92c_cmd_send_packet(struct ieee80211_hw *hw,
- struct sk_buff *skb);
-void rtl92ce_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel);
-void rtl92ce_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel, u8 channel);
bool _rtl92ce_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
- u8 configtype);
+ u8 configtype);
bool _rtl92ce_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
- u8 configtype);
-void _rtl92ce_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t);
-u32 rtl92ce_phy_query_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr, u32 bitmask);
-void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+ u8 configtype);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
index aa2b581..54b2bd5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
@@ -36,42 +36,16 @@
#include "trx.h"
#include "led.h"
-static enum rtl_desc_qsel _rtl92ce_map_hwqueue_to_fwqueue(__le16 fc,
- unsigned int
- skb_queue)
+static u8 _rtl92ce_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 hw_queue)
{
- enum rtl_desc_qsel qsel;
+ __le16 fc = rtl_get_fc(skb);
- if (unlikely(ieee80211_is_beacon(fc))) {
- qsel = QSLT_BEACON;
- return qsel;
- }
+ if (unlikely(ieee80211_is_beacon(fc)))
+ return QSLT_BEACON;
+ if (ieee80211_is_mgmt(fc))
+ return QSLT_MGNT;
- if (ieee80211_is_mgmt(fc)) {
- qsel = QSLT_MGNT;
- return qsel;
- }
-
- switch (skb_queue) {
- case VO_QUEUE:
- qsel = QSLT_VO;
- break;
- case VI_QUEUE:
- qsel = QSLT_VI;
- break;
- case BE_QUEUE:
- qsel = QSLT_BE;
- break;
- case BK_QUEUE:
- qsel = QSLT_BK;
- break;
- default:
- qsel = QSLT_BE;
- RT_ASSERT(false, ("BE queue, skb_queue:%d,"
- " set qsel = 0x%X\n", skb_queue, QSLT_BE));
- break;
- }
- return qsel;
+ return skb->priority;
}
static int _rtl92ce_rate_mapping(bool isht, u8 desc_rate, bool first_ampdu)
@@ -255,6 +229,7 @@
u8 evm, pwdb_all, rf_rx_num = 0;
u8 i, max_spatial_stream;
u32 rssi, total_rssi = 0;
+ bool in_powersavemode = false;
bool is_cck_rate;
is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc);
@@ -270,9 +245,13 @@
u8 report, cck_highpwr;
cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;
- cck_highpwr = (u8) rtl_get_bbreg(hw,
- RFPGA0_XA_HSSIPARAMETER2,
- BIT(9));
+ if (!in_powersavemode)
+ cck_highpwr = (u8) rtl_get_bbreg(hw,
+ RFPGA0_XA_HSSIPARAMETER2,
+ BIT(9));
+ else
+ cck_highpwr = false;
+
if (!cck_highpwr) {
u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
report = cck_buf->cck_agc_rpt & 0xc0;
@@ -398,6 +377,7 @@
if (rtlpriv->stats.ui_rssi.total_num++ >=
PHY_RSSI_SLID_WIN_MAX) {
+
rtlpriv->stats.ui_rssi.total_num =
PHY_RSSI_SLID_WIN_MAX;
last_rssi =
@@ -424,10 +404,6 @@
if (!pstats->is_cck && pstats->packet_toself) {
for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
rfpath++) {
-
- if (!rtl8192_phy_check_is_legal_rfpath(hw, rfpath))
- continue;
-
if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) {
rtlpriv->stats.rx_rssi_percentage[rfpath] =
pstats->rx_mimo_signalstrength[rfpath];
@@ -723,7 +699,7 @@
void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr, u8 *pdesc_tx,
struct ieee80211_tx_info *info, struct sk_buff *skb,
- unsigned int queue_index)
+ u8 hw_queue, struct rtl_tcb_desc *tcb_desc)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
@@ -732,16 +708,9 @@
bool defaultadapter = true;
struct ieee80211_sta *sta;
u8 *pdesc = (u8 *) pdesc_tx;
- struct rtl_tcb_desc tcb_desc;
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u16 seq_number;
__le16 fc = hdr->frame_control;
- u8 rate_flag = info->control.rates[0].flags;
-
- enum rtl_desc_qsel fw_qsel =
- _rtl92ce_map_hwqueue_to_fwqueue(fc, queue_index);
-
+ u8 fw_qsel = _rtl92ce_map_hwqueue_to_fwqueue(skb, hw_queue);
bool firstseg = ((hdr->seq_ctrl &
cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0);
@@ -751,56 +720,68 @@
dma_addr_t mapping = pci_map_single(rtlpci->pdev,
skb->data, skb->len,
PCI_DMA_TODEVICE);
+ u8 bw_40 = 0;
+
+ rcu_read_lock();
+ sta = get_sta(hw, mac->vif, mac->bssid);
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
+ bw_40 = mac->bw_40;
+ } else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (sta)
+ bw_40 = sta->ht_cap.cap &
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ }
seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
- rtl_get_tcb_desc(hw, info, skb, &tcb_desc);
+ rtl_get_tcb_desc(hw, info, sta, skb, tcb_desc);
CLEAR_PCI_TX_DESC_CONTENT(pdesc, sizeof(struct tx_desc_92c));
+ if (ieee80211_is_nullfunc(fc) || ieee80211_is_ctl(fc)) {
+ firstseg = true;
+ lastseg = true;
+ }
if (firstseg) {
SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN);
- SET_TX_DESC_TX_RATE(pdesc, tcb_desc.hw_rate);
+ SET_TX_DESC_TX_RATE(pdesc, tcb_desc->hw_rate);
- if (tcb_desc.use_shortgi || tcb_desc.use_shortpreamble)
+ if (tcb_desc->use_shortgi || tcb_desc->use_shortpreamble)
SET_TX_DESC_DATA_SHORTGI(pdesc, 1);
- if (mac->tids[tid].agg.agg_state == RTL_AGG_ON &&
- info->flags & IEEE80211_TX_CTL_AMPDU) {
+ if (info->flags & IEEE80211_TX_CTL_AMPDU) {
SET_TX_DESC_AGG_BREAK(pdesc, 1);
SET_TX_DESC_MAX_AGG_NUM(pdesc, 0x14);
}
SET_TX_DESC_SEQ(pdesc, seq_number);
- SET_TX_DESC_RTS_ENABLE(pdesc, ((tcb_desc.rts_enable &&
- !tcb_desc.
+ SET_TX_DESC_RTS_ENABLE(pdesc, ((tcb_desc->rts_enable &&
+ !tcb_desc->
cts_enable) ? 1 : 0));
SET_TX_DESC_HW_RTS_ENABLE(pdesc,
- ((tcb_desc.rts_enable
- || tcb_desc.cts_enable) ? 1 : 0));
- SET_TX_DESC_CTS2SELF(pdesc, ((tcb_desc.cts_enable) ? 1 : 0));
- SET_TX_DESC_RTS_STBC(pdesc, ((tcb_desc.rts_stbc) ? 1 : 0));
+ ((tcb_desc->rts_enable
+ || tcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_CTS2SELF(pdesc, ((tcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_RTS_STBC(pdesc, ((tcb_desc->rts_stbc) ? 1 : 0));
- SET_TX_DESC_RTS_RATE(pdesc, tcb_desc.rts_rate);
+ SET_TX_DESC_RTS_RATE(pdesc, tcb_desc->rts_rate);
SET_TX_DESC_RTS_BW(pdesc, 0);
- SET_TX_DESC_RTS_SC(pdesc, tcb_desc.rts_sc);
+ SET_TX_DESC_RTS_SC(pdesc, tcb_desc->rts_sc);
SET_TX_DESC_RTS_SHORT(pdesc,
- ((tcb_desc.rts_rate <= DESC92C_RATE54M) ?
- (tcb_desc.rts_use_shortpreamble ? 1 : 0)
- : (tcb_desc.rts_use_shortgi ? 1 : 0)));
+ ((tcb_desc->rts_rate <= DESC92C_RATE54M) ?
+ (tcb_desc->rts_use_shortpreamble ? 1 : 0)
+ : (tcb_desc->rts_use_shortgi ? 1 : 0)));
- if (mac->bw_40) {
- if (tcb_desc.packet_bw) {
+ if (bw_40) {
+ if (tcb_desc->packet_bw) {
SET_TX_DESC_DATA_BW(pdesc, 1);
SET_TX_DESC_TX_SUB_CARRIER(pdesc, 3);
} else {
SET_TX_DESC_DATA_BW(pdesc, 0);
-
- if (rate_flag & IEEE80211_TX_RC_DUP_DATA) {
- SET_TX_DESC_TX_SUB_CARRIER(pdesc,
- mac->cur_40_prime_sc);
- }
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc,
+ mac->cur_40_prime_sc);
}
} else {
SET_TX_DESC_DATA_BW(pdesc, 0);
@@ -810,13 +791,10 @@
SET_TX_DESC_LINIP(pdesc, 0);
SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb->len);
- rcu_read_lock();
- sta = ieee80211_find_sta(mac->vif, mac->bssid);
if (sta) {
u8 ampdu_density = sta->ht_cap.ampdu_density;
SET_TX_DESC_AMPDU_DENSITY(pdesc, ampdu_density);
}
- rcu_read_unlock();
if (info->control.hw_key) {
struct ieee80211_key_conf *keyconf =
@@ -844,7 +822,7 @@
SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F);
SET_TX_DESC_RTS_RATE_FB_LIMIT(pdesc, 0xF);
SET_TX_DESC_DISABLE_FB(pdesc, 0);
- SET_TX_DESC_USE_RATE(pdesc, tcb_desc.use_driver_rate ? 1 : 0);
+ SET_TX_DESC_USE_RATE(pdesc, tcb_desc->use_driver_rate ? 1 : 0);
if (ieee80211_is_data_qos(fc)) {
if (mac->rdg_en) {
@@ -855,24 +833,24 @@
}
}
}
+ rcu_read_unlock();
SET_TX_DESC_FIRST_SEG(pdesc, (firstseg ? 1 : 0));
SET_TX_DESC_LAST_SEG(pdesc, (lastseg ? 1 : 0));
SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) skb->len);
- SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+ SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, mapping);
if (rtlpriv->dm.useramask) {
- SET_TX_DESC_RATE_ID(pdesc, tcb_desc.ratr_index);
- SET_TX_DESC_MACID(pdesc, tcb_desc.mac_id);
+ SET_TX_DESC_RATE_ID(pdesc, tcb_desc->ratr_index);
+ SET_TX_DESC_MACID(pdesc, tcb_desc->mac_id);
} else {
- SET_TX_DESC_RATE_ID(pdesc, 0xC + tcb_desc.ratr_index);
- SET_TX_DESC_MACID(pdesc, tcb_desc.ratr_index);
+ SET_TX_DESC_RATE_ID(pdesc, 0xC + tcb_desc->ratr_index);
+ SET_TX_DESC_MACID(pdesc, tcb_desc->ratr_index);
}
- if ((!ieee80211_is_data_qos(fc)) && ppsc->leisure_ps &&
- ppsc->fwctrl_lps) {
+ if ((!ieee80211_is_data_qos(fc)) && ppsc->fwctrl_lps) {
SET_TX_DESC_HWSEQ_EN(pdesc, 1);
SET_TX_DESC_PKT_ID(pdesc, 8);
@@ -923,7 +901,7 @@
SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) (skb->len));
- SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+ SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, mapping);
SET_TX_DESC_RATE_ID(pdesc, 7);
SET_TX_DESC_MACID(pdesc, 0);
@@ -1021,7 +999,7 @@
return ret;
}
-void rtl92ce_tx_polling(struct ieee80211_hw *hw, unsigned int hw_queue)
+void rtl92ce_tx_polling(struct ieee80211_hw *hw, u8 hw_queue)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (hw_queue == BEACON_QUEUE) {
@@ -1032,35 +1010,3 @@
}
}
-bool _rtl92c_cmd_send_packet(struct ieee80211_hw *hw,
- struct sk_buff *skb)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- struct rtl8192_tx_ring *ring;
- struct rtl_tx_desc *pdesc;
- u8 own;
- unsigned long flags;
- struct sk_buff *pskb = NULL;
-
- ring = &rtlpci->tx_ring[BEACON_QUEUE];
-
- spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
-
- pskb = __skb_dequeue(&ring->queue);
- if (pskb)
- kfree_skb(pskb);
-
- pdesc = &ring->desc[0];
- own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc, true, HW_DESC_OWN);
-
- rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *) pdesc, 1, 1, skb);
-
- __skb_queue_tail(&ring->queue, skb);
-
- spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
-
- rtlpriv->cfg->ops->tx_polling(hw, BEACON_QUEUE);
-
- return true;
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
index 803adcc..0f11771 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
@@ -532,9 +532,9 @@
#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
do { \
if (_size > TX_DESC_NEXT_DESC_OFFSET) \
- memset((void *)__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
+ memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
else \
- memset((void *)__pdesc, 0, _size); \
+ memset(__pdesc, 0, _size); \
} while (0);
#define RX_HAL_IS_CCK_RATE(_pdesc)\
@@ -724,17 +724,16 @@
void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr,
u8 *pdesc, struct ieee80211_tx_info *info,
- struct sk_buff *skb, unsigned int qsel);
+ struct sk_buff *skb, u8 hw_queue,
+ struct rtl_tcb_desc *ptcb_desc);
bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
struct rtl_stats *stats,
struct ieee80211_rx_status *rx_status,
u8 *pdesc, struct sk_buff *skb);
void rtl92ce_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
u32 rtl92ce_get_desc(u8 *pdesc, bool istx, u8 desc_name);
-void rtl92ce_tx_polling(struct ieee80211_hw *hw, unsigned int hw_queue);
+void rtl92ce_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
bool b_firstseg, bool b_lastseg,
struct sk_buff *skb);
-bool _rtl92c_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb);
-
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 9444e76..52e2af5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -39,6 +39,7 @@
#include "mac.h"
#include "dm.h"
#include "hw.h"
+#include "../rtl8192ce/hw.h"
#include "trx.h"
#include "led.h"
#include "table.h"
@@ -605,10 +606,10 @@
if (!IS_NORMAL_CHIP(rtlhal->version))
return;
tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
- rtlefuse->epromtype = (tmp_u1b & EEPROMSEL) ?
+ rtlefuse->epromtype = (tmp_u1b & BOOT_FROM_EEPROM) ?
EEPROM_93C46 : EEPROM_BOOT_EFUSE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from %s\n",
- (tmp_u1b & EEPROMSEL) ? "EERROM" : "EFUSE"));
+ (tmp_u1b & BOOT_FROM_EEPROM) ? "EERROM" : "EFUSE"));
rtlefuse->autoload_failflag = (tmp_u1b & EEPROM_EN) ? false : true;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload %s\n",
(tmp_u1b & EEPROM_EN) ? "OK!!" : "ERR!!"));
@@ -921,7 +922,7 @@
u8 out_ep_num,
u8 queue_sel)
{
- u8 hq_sele;
+ u8 hq_sele = 0;
struct rtl_priv *rtlpriv = rtl_priv(hw);
switch (out_ep_num) {
@@ -977,7 +978,7 @@
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- mac->rx_conf = (RCR_APM | RCR_AM | RCR_ADF | RCR_AB | RCR_APP_FCS |
+ mac->rx_conf = (RCR_APM | RCR_AM | RCR_ADF | RCR_AB | RCR_APPFCS |
RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL |
RCR_APP_MIC | RCR_APP_PHYSTS | RCR_ACRC32);
rtl_write_dword(rtlpriv, REG_RCR, mac->rx_conf);
@@ -2182,7 +2183,9 @@
}
}
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw)
+void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
index 62af555..32f85cb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
@@ -98,13 +98,14 @@
u32 add_msr, u32 rm_msr);
void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw);
+void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level);
void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level);
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw);
bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid);
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
-u8 _rtl92c_get_chnl_group(u8 chnl);
int rtl92c_download_fw(struct ieee80211_hw *hw);
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
index 4e020e6..9a3d023 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
@@ -38,7 +38,7 @@
#include "table.h"
u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr, u32 bitmask)
+ enum radio_path rfpath, u32 regaddr, u32 bitmask)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u32 original_value, readback_value, bitshift;
@@ -64,8 +64,8 @@
}
void rtl92cu_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath,
- u32 regaddr, u32 bitmask, u32 data)
+ enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -163,7 +163,7 @@
}
bool _rtl92cu_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
- u8 configtype)
+ u8 configtype)
{
int i;
u32 *phy_regarray_table;
@@ -223,7 +223,7 @@
}
bool _rtl92cu_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
- u8 configtype)
+ u8 configtype)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -459,7 +459,7 @@
}
}
-bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
+static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
enum rf_pwrstate rfpwr_state)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -595,7 +595,7 @@
}
bool rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
- enum rf_pwrstate rfpwr_state)
+ enum rf_pwrstate rfpwr_state)
{
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
bool bresult = false;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.h b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.h
index 0629955..ff81a61 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.h
@@ -34,3 +34,17 @@
void rtl92c_phy_set_io(struct ieee80211_hw *hw);
bool _rtl92cu_phy_config_mac_with_headerfile(struct ieee80211_hw *hw);
bool rtl92cu_phy_bb_config(struct ieee80211_hw *hw);
+u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 regaddr, u32 bitmask);
+void rtl92cu_phy_set_rf_reg(struct ieee80211_hw *hw,
+ enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data);
+bool rtl92cu_phy_mac_config(struct ieee80211_hw *hw);
+bool _rtl92cu_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
+ u8 configtype);
+void _rtl92cu_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t);
+bool _rtl92cu_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
+ u8 configtype);
+void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+bool rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpwr_state);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
index 1c79c22..c7576ec 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
@@ -62,7 +62,7 @@
}
void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel)
+ u8 *ppowerlevel)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
@@ -389,7 +389,7 @@
}
void rtl92cu_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
- u8 *ppowerlevel, u8 channel)
+ u8 *ppowerlevel, u8 channel)
{
u32 writeVal[2], powerBase0[2], powerBase1[2];
u8 index = 0;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.h b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.h
index 86c2728..500a209 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.h
@@ -43,5 +43,9 @@
bool rtl92cu_phy_rf6052_config(struct ieee80211_hw *hw);
bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
+void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel);
+void rtl92cu_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel, u8 channel);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 71244a3..bee7c14 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -94,7 +94,7 @@
.update_interrupt_mask = rtl92cu_update_interrupt_mask,
.get_hw_reg = rtl92cu_get_hw_reg,
.set_hw_reg = rtl92cu_set_hw_reg,
- .update_rate_table = rtl92cu_update_hal_rate_table,
+ .update_rate_tbl = rtl92cu_update_hal_rate_table,
.update_rate_mask = rtl92cu_update_hal_rate_mask,
.fill_tx_desc = rtl92cu_tx_fill_desc,
.fill_fake_txdesc = rtl92cu_fill_fake_txdesc,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
index d0b0d43..3a92ba3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
@@ -372,7 +372,7 @@
__le16 fc;
struct ieee80211_hdr *hdr;
- memset(rx_status, 0, sizeof(rx_status));
+ memset(rx_status, 0, sizeof(*rx_status));
rxdesc = skb->data;
skb_len = skb->len;
drvinfo_len = (GET_RX_DESC_DRVINFO_SIZE(rxdesc) * RTL_RX_DRV_INFO_UNIT);
@@ -434,7 +434,7 @@
"0x%02X\n", fc, (u32)hdr->addr1[0], (u32)hdr->addr1[1],
(u32)hdr->addr1[2], (u32)hdr->addr1[3], (u32)hdr->addr1[4],
(u32)hdr->addr1[5]));
- memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
ieee80211_rx_irqsafe(hw, skb);
}
@@ -498,14 +498,14 @@
void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr, u8 *pdesc_tx,
struct ieee80211_tx_info *info, struct sk_buff *skb,
- unsigned int queue_index)
+ u8 queue_index,
+ struct rtl_tcb_desc *tcb_desc)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
bool defaultadapter = true;
- struct ieee80211_sta *sta;
- struct rtl_tcb_desc tcb_desc;
+ struct ieee80211_sta *sta = info->control.sta = info->control.sta;
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u16 seq_number;
@@ -517,15 +517,15 @@
u8 *txdesc;
seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
- rtl_get_tcb_desc(hw, info, skb, &tcb_desc);
+ rtl_get_tcb_desc(hw, info, sta, skb, tcb_desc);
txdesc = (u8 *)skb_push(skb, RTL_TX_HEADER_SIZE);
memset(txdesc, 0, RTL_TX_HEADER_SIZE);
SET_TX_DESC_PKT_SIZE(txdesc, pktlen);
SET_TX_DESC_LINIP(txdesc, 0);
SET_TX_DESC_PKT_OFFSET(txdesc, RTL_DUMMY_OFFSET);
SET_TX_DESC_OFFSET(txdesc, RTL_TX_HEADER_SIZE);
- SET_TX_DESC_TX_RATE(txdesc, tcb_desc.hw_rate);
- if (tcb_desc.use_shortgi || tcb_desc.use_shortpreamble)
+ SET_TX_DESC_TX_RATE(txdesc, tcb_desc->hw_rate);
+ if (tcb_desc->use_shortgi || tcb_desc->use_shortpreamble)
SET_TX_DESC_DATA_SHORTGI(txdesc, 1);
if (mac->tids[tid].agg.agg_state == RTL_AGG_ON &&
info->flags & IEEE80211_TX_CTL_AMPDU) {
@@ -535,21 +535,21 @@
SET_TX_DESC_AGG_BREAK(txdesc, 1);
}
SET_TX_DESC_SEQ(txdesc, seq_number);
- SET_TX_DESC_RTS_ENABLE(txdesc, ((tcb_desc.rts_enable &&
- !tcb_desc.cts_enable) ? 1 : 0));
- SET_TX_DESC_HW_RTS_ENABLE(txdesc, ((tcb_desc.rts_enable ||
- tcb_desc.cts_enable) ? 1 : 0));
- SET_TX_DESC_CTS2SELF(txdesc, ((tcb_desc.cts_enable) ? 1 : 0));
- SET_TX_DESC_RTS_STBC(txdesc, ((tcb_desc.rts_stbc) ? 1 : 0));
- SET_TX_DESC_RTS_RATE(txdesc, tcb_desc.rts_rate);
+ SET_TX_DESC_RTS_ENABLE(txdesc, ((tcb_desc->rts_enable &&
+ !tcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_HW_RTS_ENABLE(txdesc, ((tcb_desc->rts_enable ||
+ tcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_CTS2SELF(txdesc, ((tcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_RTS_STBC(txdesc, ((tcb_desc->rts_stbc) ? 1 : 0));
+ SET_TX_DESC_RTS_RATE(txdesc, tcb_desc->rts_rate);
SET_TX_DESC_RTS_BW(txdesc, 0);
- SET_TX_DESC_RTS_SC(txdesc, tcb_desc.rts_sc);
+ SET_TX_DESC_RTS_SC(txdesc, tcb_desc->rts_sc);
SET_TX_DESC_RTS_SHORT(txdesc,
- ((tcb_desc.rts_rate <= DESC92C_RATE54M) ?
- (tcb_desc.rts_use_shortpreamble ? 1 : 0)
- : (tcb_desc.rts_use_shortgi ? 1 : 0)));
+ ((tcb_desc->rts_rate <= DESC92C_RATE54M) ?
+ (tcb_desc->rts_use_shortpreamble ? 1 : 0)
+ : (tcb_desc->rts_use_shortgi ? 1 : 0)));
if (mac->bw_40) {
- if (tcb_desc.packet_bw) {
+ if (tcb_desc->packet_bw) {
SET_TX_DESC_DATA_BW(txdesc, 1);
SET_TX_DESC_DATA_SC(txdesc, 3);
} else {
@@ -590,7 +590,7 @@
SET_TX_DESC_DATA_RATE_FB_LIMIT(txdesc, 0x1F);
SET_TX_DESC_RTS_RATE_FB_LIMIT(txdesc, 0xF);
SET_TX_DESC_DISABLE_FB(txdesc, 0);
- SET_TX_DESC_USE_RATE(txdesc, tcb_desc.use_driver_rate ? 1 : 0);
+ SET_TX_DESC_USE_RATE(txdesc, tcb_desc->use_driver_rate ? 1 : 0);
if (ieee80211_is_data_qos(fc)) {
if (mac->rdg_en) {
RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
@@ -600,11 +600,11 @@
}
}
if (rtlpriv->dm.useramask) {
- SET_TX_DESC_RATE_ID(txdesc, tcb_desc.ratr_index);
- SET_TX_DESC_MACID(txdesc, tcb_desc.mac_id);
+ SET_TX_DESC_RATE_ID(txdesc, tcb_desc->ratr_index);
+ SET_TX_DESC_MACID(txdesc, tcb_desc->mac_id);
} else {
- SET_TX_DESC_RATE_ID(txdesc, 0xC + tcb_desc.ratr_index);
- SET_TX_DESC_MACID(txdesc, tcb_desc.ratr_index);
+ SET_TX_DESC_RATE_ID(txdesc, 0xC + tcb_desc->ratr_index);
+ SET_TX_DESC_MACID(txdesc, tcb_desc->ratr_index);
}
if ((!ieee80211_is_data_qos(fc)) && ppsc->leisure_ps &&
ppsc->fwctrl_lps) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h
index b396d46..53de5f6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h
@@ -37,6 +37,8 @@
#define RTL92C_SIZE_MAX_RX_BUFFER 15360 /* 8192 */
#define RX_DRV_INFO_SIZE_UNIT 8
+#define RTL_AGG_ON 1
+
enum usb_rx_agg_mode {
USB_RX_AGG_DISABLE,
USB_RX_AGG_DMA,
@@ -419,7 +421,8 @@
void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr, u8 *pdesc_tx,
struct ieee80211_tx_info *info, struct sk_buff *skb,
- unsigned int queue_index);
+ u8 queue_index,
+ struct rtl_tcb_desc *tcb_desc);
void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 * pDesc,
u32 buffer_len, bool bIsPsPoll);
void rtl92cu_tx_fill_cmddesc(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/Makefile b/drivers/net/wireless/rtlwifi/rtl8192se/Makefile
new file mode 100644
index 0000000..b7eb138
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/Makefile
@@ -0,0 +1,15 @@
+rtl8192se-objs := \
+ dm.o \
+ fw.o \
+ hw.o \
+ led.o \
+ phy.o \
+ rf.o \
+ sw.o \
+ table.o \
+ trx.o
+
+obj-$(CONFIG_RTL8192SE) += rtl8192se.o
+
+ccflags-y += -D__CHECK_ENDIAN__
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/def.h b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
new file mode 100644
index 0000000..69828f2
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
@@ -0,0 +1,598 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_92S_DEF_H__
+#define __REALTEK_92S_DEF_H__
+
+#define RX_MPDU_QUEUE 0
+#define RX_CMD_QUEUE 1
+#define RX_MAX_QUEUE 2
+
+#define DESC92S_RATE1M 0x00
+#define DESC92S_RATE2M 0x01
+#define DESC92S_RATE5_5M 0x02
+#define DESC92S_RATE11M 0x03
+#define DESC92S_RATE6M 0x04
+#define DESC92S_RATE9M 0x05
+#define DESC92S_RATE12M 0x06
+#define DESC92S_RATE18M 0x07
+#define DESC92S_RATE24M 0x08
+#define DESC92S_RATE36M 0x09
+#define DESC92S_RATE48M 0x0a
+#define DESC92S_RATE54M 0x0b
+#define DESC92S_RATEMCS0 0x0c
+#define DESC92S_RATEMCS1 0x0d
+#define DESC92S_RATEMCS2 0x0e
+#define DESC92S_RATEMCS3 0x0f
+#define DESC92S_RATEMCS4 0x10
+#define DESC92S_RATEMCS5 0x11
+#define DESC92S_RATEMCS6 0x12
+#define DESC92S_RATEMCS7 0x13
+#define DESC92S_RATEMCS8 0x14
+#define DESC92S_RATEMCS9 0x15
+#define DESC92S_RATEMCS10 0x16
+#define DESC92S_RATEMCS11 0x17
+#define DESC92S_RATEMCS12 0x18
+#define DESC92S_RATEMCS13 0x19
+#define DESC92S_RATEMCS14 0x1a
+#define DESC92S_RATEMCS15 0x1b
+#define DESC92S_RATEMCS15_SG 0x1c
+#define DESC92S_RATEMCS32 0x20
+
+#define SHORT_SLOT_TIME 9
+#define NON_SHORT_SLOT_TIME 20
+
+/* Rx smooth factor */
+#define RX_SMOOTH_FACTOR 20
+
+/* Queue Select Value in TxDesc */
+#define QSLT_BK 0x2
+#define QSLT_BE 0x0
+#define QSLT_VI 0x5
+#define QSLT_VO 0x6
+#define QSLT_BEACON 0x10
+#define QSLT_HIGH 0x11
+#define QSLT_MGNT 0x12
+#define QSLT_CMD 0x13
+
+#define PHY_RSSI_SLID_WIN_MAX 100
+#define PHY_LINKQUALITY_SLID_WIN_MAX 20
+#define PHY_BEACON_RSSI_SLID_WIN_MAX 10
+
+/* Tx Desc */
+#define TX_DESC_SIZE_RTL8192S (16 * 4)
+#define TX_CMDDESC_SIZE_RTL8192S (16 * 4)
+
+/* Define a macro that takes a le32 word, converts it to host ordering,
+ * right shifts by a specified count, creates a mask of the specified
+ * bit count, and extracts that number of bits.
+ */
+
+#define SHIFT_AND_MASK_LE(__pdesc, __shift, __mask) \
+ ((le32_to_cpu(*(((__le32 *)(__pdesc)))) >> (__shift)) & \
+ BIT_LEN_MASK_32(__mask))
+
+/* Define a macro that clears a bit field in an le32 word and
+ * sets the specified value into that bit field. The resulting
+ * value remains in le32 ordering; however, it is properly converted
+ * to host ordering for the clear and set operations before conversion
+ * back to le32.
+ */
+
+#define SET_BITS_OFFSET_LE(__pdesc, __shift, __len, __val) \
+ (*(__le32 *)(__pdesc) = \
+ (cpu_to_le32((le32_to_cpu(*((__le32 *)(__pdesc))) & \
+ (~(BIT_OFFSET_LEN_MASK_32((__shift), __len)))) | \
+ (((u32)(__val) & BIT_LEN_MASK_32(__len)) << (__shift)))));
+
+/* macros to read/write various fields in RX or TX descriptors */
+
+/* Dword 0 */
+#define SET_TX_DESC_PKT_SIZE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 0, 16, __val)
+#define SET_TX_DESC_OFFSET(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 16, 8, __val)
+#define SET_TX_DESC_TYPE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 24, 2, __val)
+#define SET_TX_DESC_LAST_SEG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 26, 1, __val)
+#define SET_TX_DESC_FIRST_SEG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 27, 1, __val)
+#define SET_TX_DESC_LINIP(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 28, 1, __val)
+#define SET_TX_DESC_AMSDU(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 29, 1, __val)
+#define SET_TX_DESC_GREEN_FIELD(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 30, 1, __val)
+#define SET_TX_DESC_OWN(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 31, 1, __val)
+
+#define GET_TX_DESC_OWN(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 31, 1)
+
+/* Dword 1 */
+#define SET_TX_DESC_MACID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 0, 5, __val)
+#define SET_TX_DESC_MORE_DATA(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 5, 1, __val)
+#define SET_TX_DESC_MORE_FRAG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 6, 1, __val)
+#define SET_TX_DESC_PIFS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 7, 1, __val)
+#define SET_TX_DESC_QUEUE_SEL(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 8, 5, __val)
+#define SET_TX_DESC_ACK_POLICY(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 13, 2, __val)
+#define SET_TX_DESC_NO_ACM(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 15, 1, __val)
+#define SET_TX_DESC_NON_QOS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 16, 1, __val)
+#define SET_TX_DESC_KEY_ID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 17, 2, __val)
+#define SET_TX_DESC_OUI(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 19, 1, __val)
+#define SET_TX_DESC_PKT_TYPE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 20, 1, __val)
+#define SET_TX_DESC_EN_DESC_ID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 21, 1, __val)
+#define SET_TX_DESC_SEC_TYPE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 22, 2, __val)
+#define SET_TX_DESC_WDS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 24, 1, __val)
+#define SET_TX_DESC_HTC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 25, 1, __val)
+#define SET_TX_DESC_PKT_OFFSET(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 26, 5, __val)
+#define SET_TX_DESC_HWPC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 27, 1, __val)
+
+/* Dword 2 */
+#define SET_TX_DESC_DATA_RETRY_LIMIT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 0, 6, __val)
+#define SET_TX_DESC_RETRY_LIMIT_ENABLE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 6, 1, __val)
+#define SET_TX_DESC_TSFL(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 7, 5, __val)
+#define SET_TX_DESC_RTS_RETRY_COUNT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 12, 6, __val)
+#define SET_TX_DESC_DATA_RETRY_COUNT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 18, 6, __val)
+#define SET_TX_DESC_RSVD_MACID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(((__pdesc) + 8), 24, 5, __val)
+#define SET_TX_DESC_AGG_ENABLE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 29, 1, __val)
+#define SET_TX_DESC_AGG_BREAK(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 30, 1, __val)
+#define SET_TX_DESC_OWN_MAC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 31, 1, __val)
+
+/* Dword 3 */
+#define SET_TX_DESC_NEXT_HEAP_PAGE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 0, 8, __val)
+#define SET_TX_DESC_TAIL_PAGE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 8, 8, __val)
+#define SET_TX_DESC_SEQ(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 16, 12, __val)
+#define SET_TX_DESC_FRAG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 28, 4, __val)
+
+/* Dword 4 */
+#define SET_TX_DESC_RTS_RATE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 0, 6, __val)
+#define SET_TX_DESC_DISABLE_RTS_FB(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 6, 1, __val)
+#define SET_TX_DESC_RTS_RATE_FB_LIMIT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 7, 4, __val)
+#define SET_TX_DESC_CTS_ENABLE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 11, 1, __val)
+#define SET_TX_DESC_RTS_ENABLE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 12, 1, __val)
+#define SET_TX_DESC_RA_BRSR_ID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 13, 3, __val)
+#define SET_TX_DESC_TXHT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 16, 1, __val)
+#define SET_TX_DESC_TX_SHORT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 17, 1, __val)
+#define SET_TX_DESC_TX_BANDWIDTH(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 18, 1, __val)
+#define SET_TX_DESC_TX_SUB_CARRIER(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 19, 2, __val)
+#define SET_TX_DESC_TX_STBC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 21, 2, __val)
+#define SET_TX_DESC_TX_REVERSE_DIRECTION(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 23, 1, __val)
+#define SET_TX_DESC_RTS_HT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 24, 1, __val)
+#define SET_TX_DESC_RTS_SHORT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 25, 1, __val)
+#define SET_TX_DESC_RTS_BANDWIDTH(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 26, 1, __val)
+#define SET_TX_DESC_RTS_SUB_CARRIER(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 27, 2, __val)
+#define SET_TX_DESC_RTS_STBC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 29, 2, __val)
+#define SET_TX_DESC_USER_RATE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 31, 1, __val)
+
+/* Dword 5 */
+#define SET_TX_DESC_PACKET_ID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 20, 0, 9, __val)
+#define SET_TX_DESC_TX_RATE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 20, 9, 6, __val)
+#define SET_TX_DESC_DISABLE_FB(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 20, 15, 1, __val)
+#define SET_TX_DESC_DATA_RATE_FB_LIMIT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 20, 16, 5, __val)
+#define SET_TX_DESC_TX_AGC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 20, 21, 11, __val)
+
+/* Dword 6 */
+#define SET_TX_DESC_IP_CHECK_SUM(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 24, 0, 16, __val)
+#define SET_TX_DESC_TCP_CHECK_SUM(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 24, 16, 16, __val)
+
+/* Dword 7 */
+#define SET_TX_DESC_TX_BUFFER_SIZE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 28, 0, 16, __val)
+#define SET_TX_DESC_IP_HEADER_OFFSET(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 28, 16, 8, __val)
+#define SET_TX_DESC_TCP_ENABLE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 28, 31, 1, __val)
+
+/* Dword 8 */
+#define SET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 32, 0, 32, __val)
+#define GET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 32, 0, 32)
+
+/* Dword 9 */
+#define SET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 36, 0, 32, __val)
+
+/* Because the PCI Tx descriptors are chaied at the
+ * initialization and all the NextDescAddresses in
+ * these descriptors cannot not be cleared (,or
+ * driver/HW cannot find the next descriptor), the
+ * offset 36 (NextDescAddresses) is reserved when
+ * the desc is cleared. */
+#define TX_DESC_NEXT_DESC_OFFSET 36
+#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
+do { \
+ if (_size > TX_DESC_NEXT_DESC_OFFSET) \
+ memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
+ else \
+ memset(__pdesc, 0, _size); \
+} while (0);
+
+/* Rx Desc */
+#define RX_STATUS_DESC_SIZE 24
+#define RX_DRV_INFO_SIZE_UNIT 8
+
+/* DWORD 0 */
+#define SET_RX_STATUS_DESC_PKT_LEN(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 0, 14, __val)
+#define SET_RX_STATUS_DESC_CRC32(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 14, 1, __val)
+#define SET_RX_STATUS_DESC_ICV(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 15, 1, __val)
+#define SET_RX_STATUS_DESC_DRVINFO_SIZE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 16, 4, __val)
+#define SET_RX_STATUS_DESC_SECURITY(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 20, 3, __val)
+#define SET_RX_STATUS_DESC_QOS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 23, 1, __val)
+#define SET_RX_STATUS_DESC_SHIFT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 24, 2, __val)
+#define SET_RX_STATUS_DESC_PHY_STATUS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 26, 1, __val)
+#define SET_RX_STATUS_DESC_SWDEC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 27, 1, __val)
+#define SET_RX_STATUS_DESC_LAST_SEG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 28, 1, __val)
+#define SET_RX_STATUS_DESC_FIRST_SEG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 29, 1, __val)
+#define SET_RX_STATUS_DESC_EOR(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 30, 1, __val)
+#define SET_RX_STATUS_DESC_OWN(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc, 31, 1, __val)
+
+#define GET_RX_STATUS_DESC_PKT_LEN(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 0, 14)
+#define GET_RX_STATUS_DESC_CRC32(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 14, 1)
+#define GET_RX_STATUS_DESC_ICV(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 15, 1)
+#define GET_RX_STATUS_DESC_DRVINFO_SIZE(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 16, 4)
+#define GET_RX_STATUS_DESC_SECURITY(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 20, 3)
+#define GET_RX_STATUS_DESC_QOS(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 23, 1)
+#define GET_RX_STATUS_DESC_SHIFT(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 24, 2)
+#define GET_RX_STATUS_DESC_PHY_STATUS(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 26, 1)
+#define GET_RX_STATUS_DESC_SWDEC(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 27, 1)
+#define GET_RX_STATUS_DESC_LAST_SEG(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 28, 1)
+#define GET_RX_STATUS_DESC_FIRST_SEG(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 29, 1)
+#define GET_RX_STATUS_DESC_EOR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 30, 1)
+#define GET_RX_STATUS_DESC_OWN(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc, 31, 1)
+
+/* DWORD 1 */
+#define SET_RX_STATUS_DESC_MACID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 0, 5, __val)
+#define SET_RX_STATUS_DESC_TID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 5, 4, __val)
+#define SET_RX_STATUS_DESC_PAGGR(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 14, 1, __val)
+#define SET_RX_STATUS_DESC_FAGGR(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 15, 1, __val)
+#define SET_RX_STATUS_DESC_A1_FIT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 16, 4, __val)
+#define SET_RX_STATUS_DESC_A2_FIT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 20, 4, __val)
+#define SET_RX_STATUS_DESC_PAM(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 24, 1, __val)
+#define SET_RX_STATUS_DESC_PWR(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 25, 1, __val)
+#define SET_RX_STATUS_DESC_MOREDATA(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 26, 1, __val)
+#define SET_RX_STATUS_DESC_MOREFRAG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 27, 1, __val)
+#define SET_RX_STATUS_DESC_TYPE(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 28, 2, __val)
+#define SET_RX_STATUS_DESC_MC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 30, 1, __val)
+#define SET_RX_STATUS_DESC_BC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 4, 31, 1, __val)
+
+#define GET_RX_STATUS_DEC_MACID(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 0, 5)
+#define GET_RX_STATUS_DESC_TID(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 5, 4)
+#define GET_RX_STATUS_DESC_PAGGR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 14, 1)
+#define GET_RX_STATUS_DESC_FAGGR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 15, 1)
+#define GET_RX_STATUS_DESC_A1_FIT(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 16, 4)
+#define GET_RX_STATUS_DESC_A2_FIT(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 20, 4)
+#define GET_RX_STATUS_DESC_PAM(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 24, 1)
+#define GET_RX_STATUS_DESC_PWR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 25, 1)
+#define GET_RX_STATUS_DESC_MORE_DATA(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 26, 1)
+#define GET_RX_STATUS_DESC_MORE_FRAG(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 27, 1)
+#define GET_RX_STATUS_DESC_TYPE(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 28, 2)
+#define GET_RX_STATUS_DESC_MC(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 30, 1)
+#define GET_RX_STATUS_DESC_BC(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 4, 31, 1)
+
+/* DWORD 2 */
+#define SET_RX_STATUS_DESC_SEQ(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 0, 12, __val)
+#define SET_RX_STATUS_DESC_FRAG(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 12, 4, __val)
+#define SET_RX_STATUS_DESC_NEXT_PKTLEN(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 16, 8, __val)
+#define SET_RX_STATUS_DESC_NEXT_IND(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 8, 30, 1, __val)
+
+#define GET_RX_STATUS_DESC_SEQ(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 8, 0, 12)
+#define GET_RX_STATUS_DESC_FRAG(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 8, 12, 4)
+#define GET_RX_STATUS_DESC_NEXT_PKTLEN(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 8, 16, 8)
+#define GET_RX_STATUS_DESC_NEXT_IND(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 8, 30, 1)
+
+/* DWORD 3 */
+#define SET_RX_STATUS_DESC_RX_MCS(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 0, 6, __val)
+#define SET_RX_STATUS_DESC_RX_HT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 6, 1, __val)
+#define SET_RX_STATUS_DESC_AMSDU(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 7, 1, __val)
+#define SET_RX_STATUS_DESC_SPLCP(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 8, 1, __val)
+#define SET_RX_STATUS_DESC_BW(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 9, 1, __val)
+#define SET_RX_STATUS_DESC_HTC(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 10, 1, __val)
+#define SET_RX_STATUS_DESC_TCP_CHK_RPT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 11, 1, __val)
+#define SET_RX_STATUS_DESC_IP_CHK_RPT(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 12, 1, __val)
+#define SET_RX_STATUS_DESC_TCP_CHK_VALID(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 13, 1, __val)
+#define SET_RX_STATUS_DESC_HWPC_ERR(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 14, 1, __val)
+#define SET_RX_STATUS_DESC_HWPC_IND(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 15, 1, __val)
+#define SET_RX_STATUS_DESC_IV0(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 12, 16, 16, __val)
+
+#define GET_RX_STATUS_DESC_RX_MCS(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 0, 6)
+#define GET_RX_STATUS_DESC_RX_HT(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 6, 1)
+#define GET_RX_STATUS_DESC_AMSDU(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 7, 1)
+#define GET_RX_STATUS_DESC_SPLCP(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 8, 1)
+#define GET_RX_STATUS_DESC_BW(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 9, 1)
+#define GET_RX_STATUS_DESC_HTC(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 10, 1)
+#define GET_RX_STATUS_DESC_TCP_CHK_RPT(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 11, 1)
+#define GET_RX_STATUS_DESC_IP_CHK_RPT(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 12, 1)
+#define GET_RX_STATUS_DESC_TCP_CHK_VALID(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 13, 1)
+#define GET_RX_STATUS_DESC_HWPC_ERR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 14, 1)
+#define GET_RX_STATUS_DESC_HWPC_IND(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 15, 1)
+#define GET_RX_STATUS_DESC_IV0(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 12, 16, 16)
+
+/* DWORD 4 */
+#define SET_RX_STATUS_DESC_IV1(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 16, 0, 32, __val)
+#define GET_RX_STATUS_DESC_IV1(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 16, 0, 32)
+
+/* DWORD 5 */
+#define SET_RX_STATUS_DESC_TSFL(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 20, 0, 32, __val)
+#define GET_RX_STATUS_DESC_TSFL(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 20, 0, 32)
+
+/* DWORD 6 */
+#define SET_RX_STATUS__DESC_BUFF_ADDR(__pdesc, __val) \
+ SET_BITS_OFFSET_LE(__pdesc + 24, 0, 32, __val)
+
+#define RX_HAL_IS_CCK_RATE(_pdesc)\
+ (GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE1M || \
+ GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE2M || \
+ GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE5_5M ||\
+ GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE11M)
+
+enum rf_optype {
+ RF_OP_BY_SW_3WIRE = 0,
+ RF_OP_BY_FW,
+ RF_OP_MAX
+};
+
+enum ic_inferiority {
+ IC_INFERIORITY_A = 0,
+ IC_INFERIORITY_B = 1,
+};
+
+enum fwcmd_iotype {
+ /* For DIG DM */
+ FW_CMD_DIG_ENABLE = 0,
+ FW_CMD_DIG_DISABLE = 1,
+ FW_CMD_DIG_HALT = 2,
+ FW_CMD_DIG_RESUME = 3,
+ /* For High Power DM */
+ FW_CMD_HIGH_PWR_ENABLE = 4,
+ FW_CMD_HIGH_PWR_DISABLE = 5,
+ /* For Rate adaptive DM */
+ FW_CMD_RA_RESET = 6,
+ FW_CMD_RA_ACTIVE = 7,
+ FW_CMD_RA_REFRESH_N = 8,
+ FW_CMD_RA_REFRESH_BG = 9,
+ FW_CMD_RA_INIT = 10,
+ /* For FW supported IQK */
+ FW_CMD_IQK_INIT = 11,
+ /* Tx power tracking switch,
+ * MP driver only */
+ FW_CMD_TXPWR_TRACK_ENABLE = 12,
+ /* Tx power tracking switch,
+ * MP driver only */
+ FW_CMD_TXPWR_TRACK_DISABLE = 13,
+ /* Tx power tracking with thermal
+ * indication, for Normal driver */
+ FW_CMD_TXPWR_TRACK_THERMAL = 14,
+ FW_CMD_PAUSE_DM_BY_SCAN = 15,
+ FW_CMD_RESUME_DM_BY_SCAN = 16,
+ FW_CMD_RA_REFRESH_N_COMB = 17,
+ FW_CMD_RA_REFRESH_BG_COMB = 18,
+ FW_CMD_ANTENNA_SW_ENABLE = 19,
+ FW_CMD_ANTENNA_SW_DISABLE = 20,
+ /* Tx Status report for CCX from FW */
+ FW_CMD_TX_FEEDBACK_CCX_ENABLE = 21,
+ /* Indifate firmware that driver
+ * enters LPS, For PS-Poll issue */
+ FW_CMD_LPS_ENTER = 22,
+ /* Indicate firmware that driver
+ * leave LPS*/
+ FW_CMD_LPS_LEAVE = 23,
+ /* Set DIG mode to signal strength */
+ FW_CMD_DIG_MODE_SS = 24,
+ /* Set DIG mode to false alarm. */
+ FW_CMD_DIG_MODE_FA = 25,
+ FW_CMD_ADD_A2_ENTRY = 26,
+ FW_CMD_CTRL_DM_BY_DRIVER = 27,
+ FW_CMD_CTRL_DM_BY_DRIVER_NEW = 28,
+ FW_CMD_PAPE_CONTROL = 29,
+ FW_CMD_IQK_ENABLE = 30,
+};
+
+/*
+ * Driver info contain PHY status
+ * and other variabel size info
+ * PHY Status content as below
+ */
+struct rx_fwinfo {
+ /* DWORD 0 */
+ u8 gain_trsw[4];
+ /* DWORD 1 */
+ u8 pwdb_all;
+ u8 cfosho[4];
+ /* DWORD 2 */
+ u8 cfotail[4];
+ /* DWORD 3 */
+ s8 rxevm[2];
+ s8 rxsnr[4];
+ /* DWORD 4 */
+ u8 pdsnr[2];
+ /* DWORD 5 */
+ u8 csi_current[2];
+ u8 csi_target[2];
+ /* DWORD 6 */
+ u8 sigevm;
+ u8 max_ex_pwr;
+ u8 ex_intf_flag:1;
+ u8 sgi_en:1;
+ u8 rxsc:2;
+ u8 reserve:4;
+};
+
+struct phy_sts_cck_8192s_t {
+ u8 adc_pwdb_x[4];
+ u8 sq_rpt;
+ u8 cck_agc_rpt;
+};
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.c b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
new file mode 100644
index 0000000..da86db8
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
@@ -0,0 +1,733 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+
+struct dig_t digtable;
+static const u32 edca_setting_dl[PEER_MAX] = {
+ 0xa44f, /* 0 UNKNOWN */
+ 0x5ea44f, /* 1 REALTEK_90 */
+ 0x5ea44f, /* 2 REALTEK_92SE */
+ 0xa630, /* 3 BROAD */
+ 0xa44f, /* 4 RAL */
+ 0xa630, /* 5 ATH */
+ 0xa630, /* 6 CISCO */
+ 0xa42b, /* 7 MARV */
+};
+
+static const u32 edca_setting_dl_gmode[PEER_MAX] = {
+ 0x4322, /* 0 UNKNOWN */
+ 0xa44f, /* 1 REALTEK_90 */
+ 0x5ea44f, /* 2 REALTEK_92SE */
+ 0xa42b, /* 3 BROAD */
+ 0x5e4322, /* 4 RAL */
+ 0x4322, /* 5 ATH */
+ 0xa430, /* 6 CISCO */
+ 0x5ea44f, /* 7 MARV */
+};
+
+static const u32 edca_setting_ul[PEER_MAX] = {
+ 0x5e4322, /* 0 UNKNOWN */
+ 0xa44f, /* 1 REALTEK_90 */
+ 0x5ea44f, /* 2 REALTEK_92SE */
+ 0x5ea322, /* 3 BROAD */
+ 0x5ea422, /* 4 RAL */
+ 0x5ea322, /* 5 ATH */
+ 0x3ea44f, /* 6 CISCO */
+ 0x5ea44f, /* 7 MARV */
+};
+
+static void _rtl92s_dm_check_edca_turbo(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+ static u64 last_txok_cnt;
+ static u64 last_rxok_cnt;
+ u64 cur_txok_cnt = 0;
+ u64 cur_rxok_cnt = 0;
+
+ u32 edca_be_ul = edca_setting_ul[mac->vendor];
+ u32 edca_be_dl = edca_setting_dl[mac->vendor];
+ u32 edca_gmode = edca_setting_dl_gmode[mac->vendor];
+
+ if (mac->link_state != MAC80211_LINKED) {
+ rtlpriv->dm.current_turbo_edca = false;
+ goto dm_checkedcaturbo_exit;
+ }
+
+ if ((!rtlpriv->dm.is_any_nonbepkts) &&
+ (!rtlpriv->dm.disable_framebursting)) {
+ cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;
+ cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
+
+ if (rtlpriv->phy.rf_type == RF_1T2R) {
+ if (cur_txok_cnt > 4 * cur_rxok_cnt) {
+ /* Uplink TP is present. */
+ if (rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ rtl_write_dword(rtlpriv, EDCAPARA_BE,
+ edca_be_ul);
+ rtlpriv->dm.is_cur_rdlstate = false;
+ }
+ } else {/* Balance TP is present. */
+ if (!rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ if (mac->mode == WIRELESS_MODE_G ||
+ mac->mode == WIRELESS_MODE_B)
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_gmode);
+ else
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_be_dl);
+ rtlpriv->dm.is_cur_rdlstate = true;
+ }
+ }
+ rtlpriv->dm.current_turbo_edca = true;
+ } else {
+ if (cur_rxok_cnt > 4 * cur_txok_cnt) {
+ if (!rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ if (mac->mode == WIRELESS_MODE_G ||
+ mac->mode == WIRELESS_MODE_B)
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_gmode);
+ else
+ rtl_write_dword(rtlpriv,
+ EDCAPARA_BE,
+ edca_be_dl);
+ rtlpriv->dm.is_cur_rdlstate = true;
+ }
+ } else {
+ if (rtlpriv->dm.is_cur_rdlstate ||
+ !rtlpriv->dm.current_turbo_edca) {
+ rtl_write_dword(rtlpriv, EDCAPARA_BE,
+ edca_be_ul);
+ rtlpriv->dm.is_cur_rdlstate = false;
+ }
+ }
+ rtlpriv->dm.current_turbo_edca = true;
+ }
+ } else {
+ if (rtlpriv->dm.current_turbo_edca) {
+ u8 tmp = AC0_BE;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM,
+ (u8 *)(&tmp));
+ rtlpriv->dm.current_turbo_edca = false;
+ }
+ }
+
+dm_checkedcaturbo_exit:
+ rtlpriv->dm.is_any_nonbepkts = false;
+ last_txok_cnt = rtlpriv->stats.txbytesunicast;
+ last_rxok_cnt = rtlpriv->stats.rxbytesunicast;
+}
+
+static void _rtl92s_dm_txpowertracking_callback_thermalmeter(
+ struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 thermalvalue = 0;
+
+ rtlpriv->dm.txpower_trackinginit = true;
+
+ thermalvalue = (u8)rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0x1f);
+
+ RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+ ("Readback Thermal Meter = 0x%x pre thermal meter 0x%x "
+ "eeprom_thermalmeter 0x%x\n", thermalvalue,
+ rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter));
+
+ if (thermalvalue) {
+ rtlpriv->dm.thermalvalue = thermalvalue;
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_TXPWR_TRACK_THERMAL);
+ }
+
+ rtlpriv->dm.txpowercount = 0;
+}
+
+static void _rtl92s_dm_check_txpowertracking_thermalmeter(
+ struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ static u8 tm_trigger;
+ u8 tx_power_checkcnt = 5;
+
+ /* 2T2R TP issue */
+ if (rtlphy->rf_type == RF_2T2R)
+ return;
+
+ if (!rtlpriv->dm.txpower_tracking)
+ return;
+
+ if (rtlpriv->dm.txpowercount <= tx_power_checkcnt) {
+ rtlpriv->dm.txpowercount++;
+ return;
+ }
+
+ if (!tm_trigger) {
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_T_METER,
+ RFREG_OFFSET_MASK, 0x60);
+ tm_trigger = 1;
+ } else {
+ _rtl92s_dm_txpowertracking_callback_thermalmeter(hw);
+ tm_trigger = 0;
+ }
+}
+
+static void _rtl92s_dm_refresh_rateadaptive_mask(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rate_adaptive *ra = &(rtlpriv->ra);
+
+ u32 low_rssi_thresh = 0;
+ u32 middle_rssi_thresh = 0;
+ u32 high_rssi_thresh = 0;
+ u8 rssi_level;
+ struct ieee80211_sta *sta = NULL;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ if (!rtlpriv->dm.useramask)
+ return;
+
+ if (!rtlpriv->dm.inform_fw_driverctrldm) {
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_CTRL_DM_BY_DRIVER);
+ rtlpriv->dm.inform_fw_driverctrldm = true;
+ }
+
+ rcu_read_lock();
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ sta = get_sta(hw, mac->vif, mac->bssid);
+ if ((mac->link_state == MAC80211_LINKED) &&
+ (mac->opmode == NL80211_IFTYPE_STATION)) {
+ switch (ra->pre_ratr_state) {
+ case DM_RATR_STA_HIGH:
+ high_rssi_thresh = 40;
+ middle_rssi_thresh = 30;
+ low_rssi_thresh = 20;
+ break;
+ case DM_RATR_STA_MIDDLE:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 30;
+ low_rssi_thresh = 20;
+ break;
+ case DM_RATR_STA_LOW:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 34;
+ low_rssi_thresh = 20;
+ break;
+ case DM_RATR_STA_ULTRALOW:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 34;
+ low_rssi_thresh = 24;
+ break;
+ default:
+ high_rssi_thresh = 44;
+ middle_rssi_thresh = 34;
+ low_rssi_thresh = 24;
+ break;
+ }
+
+ if (rtlpriv->dm.undecorated_smoothed_pwdb >
+ (long)high_rssi_thresh) {
+ ra->ratr_state = DM_RATR_STA_HIGH;
+ rssi_level = 1;
+ } else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+ (long)middle_rssi_thresh) {
+ ra->ratr_state = DM_RATR_STA_LOW;
+ rssi_level = 3;
+ } else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+ (long)low_rssi_thresh) {
+ ra->ratr_state = DM_RATR_STA_LOW;
+ rssi_level = 5;
+ } else {
+ ra->ratr_state = DM_RATR_STA_ULTRALOW;
+ rssi_level = 6;
+ }
+
+ if (ra->pre_ratr_state != ra->ratr_state) {
+ RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD, ("RSSI = %ld "
+ "RSSI_LEVEL = %d PreState = %d, CurState = %d\n",
+ rtlpriv->dm.undecorated_smoothed_pwdb,
+ ra->ratr_state,
+ ra->pre_ratr_state, ra->ratr_state));
+
+ rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
+ ra->ratr_state);
+ ra->pre_ratr_state = ra->ratr_state;
+ }
+ }
+ rcu_read_unlock();
+}
+
+static void _rtl92s_dm_switch_baseband_mrc(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ bool current_mrc;
+ bool enable_mrc = true;
+ long tmpentry_maxpwdb = 0;
+ u8 rssi_a = 0;
+ u8 rssi_b = 0;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ if ((rtlphy->rf_type == RF_1T1R) || (rtlphy->rf_type == RF_2T2R))
+ return;
+
+ rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_MRC, (u8 *)(¤t_mrc));
+
+ if (mac->link_state >= MAC80211_LINKED) {
+ if (rtlpriv->dm.undecorated_smoothed_pwdb > tmpentry_maxpwdb) {
+ rssi_a = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_A];
+ rssi_b = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_B];
+ }
+ }
+
+ /* MRC settings would NOT affect TP on Wireless B mode. */
+ if (mac->mode != WIRELESS_MODE_B) {
+ if ((rssi_a == 0) && (rssi_b == 0)) {
+ enable_mrc = true;
+ } else if (rssi_b > 30) {
+ /* Turn on B-Path */
+ enable_mrc = true;
+ } else if (rssi_b < 5) {
+ /* Turn off B-path */
+ enable_mrc = false;
+ /* Take care of RSSI differentiation. */
+ } else if (rssi_a > 15 && (rssi_a >= rssi_b)) {
+ if ((rssi_a - rssi_b) > 15)
+ /* Turn off B-path */
+ enable_mrc = false;
+ else if ((rssi_a - rssi_b) < 10)
+ /* Turn on B-Path */
+ enable_mrc = true;
+ else
+ enable_mrc = current_mrc;
+ } else {
+ /* Turn on B-Path */
+ enable_mrc = true;
+ }
+ }
+
+ /* Update MRC settings if needed. */
+ if (enable_mrc != current_mrc)
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC,
+ (u8 *)&enable_mrc);
+
+}
+
+void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.current_turbo_edca = false;
+ rtlpriv->dm.is_any_nonbepkts = false;
+ rtlpriv->dm.is_cur_rdlstate = false;
+}
+
+static void _rtl92s_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rate_adaptive *ra = &(rtlpriv->ra);
+
+ ra->ratr_state = DM_RATR_STA_MAX;
+ ra->pre_ratr_state = DM_RATR_STA_MAX;
+
+ if (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER)
+ rtlpriv->dm.useramask = true;
+ else
+ rtlpriv->dm.useramask = false;
+
+ rtlpriv->dm.useramask = false;
+ rtlpriv->dm.inform_fw_driverctrldm = false;
+}
+
+static void _rtl92s_dm_init_txpowertracking_thermalmeter(
+ struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.txpower_tracking = true;
+ rtlpriv->dm.txpowercount = 0;
+ rtlpriv->dm.txpower_trackinginit = false;
+}
+
+static void _rtl92s_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+ u32 ret_value;
+
+ ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, MASKDWORD);
+ falsealm_cnt->cnt_parity_fail = ((ret_value & 0xffff0000) >> 16);
+
+ ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, MASKDWORD);
+ falsealm_cnt->cnt_rate_illegal = (ret_value & 0xffff);
+ falsealm_cnt->cnt_crc8_fail = ((ret_value & 0xffff0000) >> 16);
+ ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, MASKDWORD);
+ falsealm_cnt->cnt_mcs_fail = (ret_value & 0xffff);
+
+ falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail +
+ falsealm_cnt->cnt_rate_illegal + falsealm_cnt->cnt_crc8_fail +
+ falsealm_cnt->cnt_mcs_fail;
+
+ /* read CCK false alarm */
+ ret_value = rtl_get_bbreg(hw, 0xc64, MASKDWORD);
+ falsealm_cnt->cnt_cck_fail = (ret_value & 0xffff);
+ falsealm_cnt->cnt_all = falsealm_cnt->cnt_ofdm_fail +
+ falsealm_cnt->cnt_cck_fail;
+}
+
+static void rtl92s_backoff_enable_flag(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+
+ if (falsealm_cnt->cnt_all > digtable.fa_highthresh) {
+ if ((digtable.backoff_val - 6) <
+ digtable.backoffval_range_min)
+ digtable.backoff_val = digtable.backoffval_range_min;
+ else
+ digtable.backoff_val -= 6;
+ } else if (falsealm_cnt->cnt_all < digtable.fa_lowthresh) {
+ if ((digtable.backoff_val + 6) >
+ digtable.backoffval_range_max)
+ digtable.backoff_val =
+ digtable.backoffval_range_max;
+ else
+ digtable.backoff_val += 6;
+ }
+}
+
+static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+ static u8 initialized, force_write;
+ u8 initial_gain = 0;
+
+ if ((digtable.pre_sta_connectstate == digtable.cur_sta_connectstate) ||
+ (digtable.cur_sta_connectstate == DIG_STA_BEFORE_CONNECT)) {
+ if (digtable.cur_sta_connectstate == DIG_STA_BEFORE_CONNECT) {
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (digtable.backoff_enable_flag == true)
+ rtl92s_backoff_enable_flag(hw);
+ else
+ digtable.backoff_val = DM_DIG_BACKOFF;
+
+ if ((digtable.rssi_val + 10 - digtable.backoff_val) >
+ digtable.rx_gain_range_max)
+ digtable.cur_igvalue =
+ digtable.rx_gain_range_max;
+ else if ((digtable.rssi_val + 10 - digtable.backoff_val)
+ < digtable.rx_gain_range_min)
+ digtable.cur_igvalue =
+ digtable.rx_gain_range_min;
+ else
+ digtable.cur_igvalue = digtable.rssi_val + 10 -
+ digtable.backoff_val;
+
+ if (falsealm_cnt->cnt_all > 10000)
+ digtable.cur_igvalue =
+ (digtable.cur_igvalue > 0x33) ?
+ digtable.cur_igvalue : 0x33;
+
+ if (falsealm_cnt->cnt_all > 16000)
+ digtable.cur_igvalue =
+ digtable.rx_gain_range_max;
+ /* connected -> connected or disconnected -> disconnected */
+ } else {
+ /* Firmware control DIG, do nothing in driver dm */
+ return;
+ }
+ /* disconnected -> connected or connected ->
+ * disconnected or beforeconnect->(dis)connected */
+ } else {
+ /* Enable FW DIG */
+ digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_ENABLE);
+
+ digtable.backoff_val = DM_DIG_BACKOFF;
+ digtable.cur_igvalue = rtlpriv->phy.default_initialgain[0];
+ digtable.pre_igvalue = 0;
+ return;
+ }
+
+ /* Forced writing to prevent from fw-dig overwriting. */
+ if (digtable.pre_igvalue != rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1,
+ MASKBYTE0))
+ force_write = 1;
+
+ if ((digtable.pre_igvalue != digtable.cur_igvalue) ||
+ !initialized || force_write) {
+ /* Disable FW DIG */
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_DISABLE);
+
+ initial_gain = (u8)digtable.cur_igvalue;
+
+ /* Set initial gain. */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, initial_gain);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, initial_gain);
+ digtable.pre_igvalue = digtable.cur_igvalue;
+ initialized = 1;
+ force_write = 0;
+ }
+}
+
+static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->mac80211.act_scanning)
+ return;
+
+ /* Decide the current status and if modify initial gain or not */
+ if (rtlpriv->mac80211.link_state >= MAC80211_LINKED ||
+ rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
+ digtable.cur_sta_connectstate = DIG_STA_CONNECT;
+ else
+ digtable.cur_sta_connectstate = DIG_STA_DISCONNECT;
+
+ digtable.rssi_val = rtlpriv->dm.undecorated_smoothed_pwdb;
+
+ /* Change dig mode to rssi */
+ if (digtable.cur_sta_connectstate != DIG_STA_DISCONNECT) {
+ if (digtable.dig_twoport_algorithm ==
+ DIG_TWO_PORT_ALGO_FALSE_ALARM) {
+ digtable.dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_MODE_SS);
+ }
+ }
+
+ _rtl92s_dm_false_alarm_counter_statistics(hw);
+ _rtl92s_dm_initial_gain_sta_beforeconnect(hw);
+
+ digtable.pre_sta_connectstate = digtable.cur_sta_connectstate;
+}
+
+static void _rtl92s_dm_ctrl_initgain_byrssi(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* 2T2R TP issue */
+ if (rtlphy->rf_type == RF_2T2R)
+ return;
+
+ if (!rtlpriv->dm.dm_initialgain_enable)
+ return;
+
+ if (digtable.dig_enable_flag == false)
+ return;
+
+ _rtl92s_dm_ctrl_initgain_bytwoport(hw);
+}
+
+static void _rtl92s_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ long undecorated_smoothed_pwdb;
+ long txpwr_threshold_lv1, txpwr_threshold_lv2;
+
+ /* 2T2R TP issue */
+ if (rtlphy->rf_type == RF_2T2R)
+ return;
+
+ if (!rtlpriv->dm.dynamic_txpower_enable ||
+ rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ return;
+ }
+
+ if ((mac->link_state < MAC80211_LINKED) &&
+ (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+ ("Not connected to any\n"));
+
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+
+ rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ return;
+ }
+
+ if (mac->link_state >= MAC80211_LINKED) {
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("AP Client PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.undecorated_smoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("STA Default Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ }
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("AP Ext Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ }
+
+ txpwr_threshold_lv2 = TX_POWER_NEAR_FIELD_THRESH_LVL2;
+ txpwr_threshold_lv1 = TX_POWER_NEAR_FIELD_THRESH_LVL1;
+
+ if (rtl_get_bbreg(hw, 0xc90, MASKBYTE0) == 1)
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ else if (undecorated_smoothed_pwdb >= txpwr_threshold_lv2)
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL2;
+ else if ((undecorated_smoothed_pwdb < (txpwr_threshold_lv2 - 3)) &&
+ (undecorated_smoothed_pwdb >= txpwr_threshold_lv1))
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL1;
+ else if (undecorated_smoothed_pwdb < (txpwr_threshold_lv1 - 3))
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+
+ if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl))
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+ rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
+}
+
+static void _rtl92s_dm_init_dig(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ /* Disable DIG scheme now.*/
+ digtable.dig_enable_flag = true;
+ digtable.backoff_enable_flag = true;
+
+ if ((rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER) &&
+ (hal_get_firmwareversion(rtlpriv) >= 0x3c))
+ digtable.dig_algorithm = DIG_ALGO_BY_TOW_PORT;
+ else
+ digtable.dig_algorithm =
+ DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM;
+
+ digtable.dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+ digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+ /* off=by real rssi value, on=by digtable.rssi_val for new dig */
+ digtable.dig_dbgmode = DM_DBG_OFF;
+ digtable.dig_slgorithm_switch = 0;
+
+ /* 2007/10/04 MH Define init gain threshol. */
+ digtable.dig_state = DM_STA_DIG_MAX;
+ digtable.dig_highpwrstate = DM_STA_DIG_MAX;
+
+ digtable.cur_sta_connectstate = DIG_STA_DISCONNECT;
+ digtable.pre_sta_connectstate = DIG_STA_DISCONNECT;
+ digtable.cur_ap_connectstate = DIG_AP_DISCONNECT;
+ digtable.pre_ap_connectstate = DIG_AP_DISCONNECT;
+
+ digtable.rssi_lowthresh = DM_DIG_THRESH_LOW;
+ digtable.rssi_highthresh = DM_DIG_THRESH_HIGH;
+
+ digtable.fa_lowthresh = DM_FALSEALARM_THRESH_LOW;
+ digtable.fa_highthresh = DM_FALSEALARM_THRESH_HIGH;
+
+ digtable.rssi_highpower_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
+ digtable.rssi_highpower_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
+
+ /* for dig debug rssi value */
+ digtable.rssi_val = 50;
+ digtable.backoff_val = DM_DIG_BACKOFF;
+ digtable.rx_gain_range_max = DM_DIG_MAX;
+
+ digtable.rx_gain_range_min = DM_DIG_MIN;
+
+ digtable.backoffval_range_max = DM_DIG_BACKOFF_MAX;
+ digtable.backoffval_range_min = DM_DIG_BACKOFF_MIN;
+}
+
+static void _rtl92s_dm_init_dynamic_txpower(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if ((hal_get_firmwareversion(rtlpriv) >= 60) &&
+ (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER))
+ rtlpriv->dm.dynamic_txpower_enable = true;
+ else
+ rtlpriv->dm.dynamic_txpower_enable = false;
+
+ rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+ rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
+}
+
+void rtl92s_dm_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
+ rtlpriv->dm.undecorated_smoothed_pwdb = -1;
+
+ _rtl92s_dm_init_dynamic_txpower(hw);
+ rtl92s_dm_init_edca_turbo(hw);
+ _rtl92s_dm_init_rate_adaptive_mask(hw);
+ _rtl92s_dm_init_txpowertracking_thermalmeter(hw);
+ _rtl92s_dm_init_dig(hw);
+
+ rtl_write_dword(rtlpriv, WFM5, FW_CCA_CHK_ENABLE);
+}
+
+void rtl92s_dm_watchdog(struct ieee80211_hw *hw)
+{
+ _rtl92s_dm_check_edca_turbo(hw);
+ _rtl92s_dm_check_txpowertracking_thermalmeter(hw);
+ _rtl92s_dm_ctrl_initgain_byrssi(hw);
+ _rtl92s_dm_dynamic_txpower(hw);
+ _rtl92s_dm_refresh_rateadaptive_mask(hw);
+ _rtl92s_dm_switch_baseband_mrc(hw);
+}
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.h b/drivers/net/wireless/rtlwifi/rtl8192se/dm.h
new file mode 100644
index 0000000..9051a55
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.h
@@ -0,0 +1,164 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __RTL_92S_DM_H__
+#define __RTL_92S_DM_H__
+
+struct dig_t {
+ u8 dig_enable_flag;
+ u8 dig_algorithm;
+ u8 dig_twoport_algorithm;
+ u8 dig_ext_port_stage;
+ u8 dig_dbgmode;
+ u8 dig_slgorithm_switch;
+
+ long rssi_lowthresh;
+ long rssi_highthresh;
+
+ u32 fa_lowthresh;
+ u32 fa_highthresh;
+
+ long rssi_highpower_lowthresh;
+ long rssi_highpower_highthresh;
+
+ u8 dig_state;
+ u8 dig_highpwrstate;
+ u8 cur_sta_connectstate;
+ u8 pre_sta_connectstate;
+ u8 cur_ap_connectstate;
+ u8 pre_ap_connectstate;
+
+ u8 cur_pd_thstate;
+ u8 pre_pd_thstate;
+ u8 cur_cs_ratiostate;
+ u8 pre_cs_ratiostate;
+
+ u32 pre_igvalue;
+ u32 cur_igvalue;
+
+ u8 backoff_enable_flag;
+ char backoff_val;
+ char backoffval_range_max;
+ char backoffval_range_min;
+ u8 rx_gain_range_max;
+ u8 rx_gain_range_min;
+
+ long rssi_val;
+};
+
+enum dm_dig_alg {
+ DIG_ALGO_BY_FALSE_ALARM = 0,
+ DIG_ALGO_BY_RSSI = 1,
+ DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM = 2,
+ DIG_ALGO_BY_TOW_PORT = 3,
+ DIG_ALGO_MAX
+};
+
+enum dm_dig_two_port_alg {
+ DIG_TWO_PORT_ALGO_RSSI = 0,
+ DIG_TWO_PORT_ALGO_FALSE_ALARM = 1,
+};
+
+enum dm_dig_dbg {
+ DM_DBG_OFF = 0,
+ DM_DBG_ON = 1,
+ DM_DBG_MAX
+};
+
+enum dm_dig_sta {
+ DM_STA_DIG_OFF = 0,
+ DM_STA_DIG_ON,
+ DM_STA_DIG_MAX
+};
+
+enum dm_dig_connect {
+ DIG_STA_DISCONNECT = 0,
+ DIG_STA_CONNECT = 1,
+ DIG_STA_BEFORE_CONNECT = 2,
+ DIG_AP_DISCONNECT = 3,
+ DIG_AP_CONNECT = 4,
+ DIG_AP_ADD_STATION = 5,
+ DIG_CONNECT_MAX
+};
+
+enum dm_dig_ext_port_alg {
+ DIG_EXT_PORT_STAGE_0 = 0,
+ DIG_EXT_PORT_STAGE_1 = 1,
+ DIG_EXT_PORT_STAGE_2 = 2,
+ DIG_EXT_PORT_STAGE_3 = 3,
+ DIG_EXT_PORT_STAGE_MAX = 4,
+};
+
+enum dm_ratr_sta {
+ DM_RATR_STA_HIGH = 0,
+ DM_RATR_STA_MIDDLEHIGH = 1,
+ DM_RATR_STA_MIDDLE = 2,
+ DM_RATR_STA_MIDDLELOW = 3,
+ DM_RATR_STA_LOW = 4,
+ DM_RATR_STA_ULTRALOW = 5,
+ DM_RATR_STA_MAX
+};
+
+#define DM_TYPE_BYFW 0
+#define DM_TYPE_BYDRIVER 1
+
+#define TX_HIGH_PWR_LEVEL_NORMAL 0
+#define TX_HIGH_PWR_LEVEL_LEVEL1 1
+#define TX_HIGH_PWR_LEVEL_LEVEL2 2
+
+#define HAL_DM_DIG_DISABLE BIT(0) /* Disable Dig */
+#define HAL_DM_HIPWR_DISABLE BIT(1) /* Disable High Power */
+
+#define TX_HIGHPWR_LEVEL_NORMAL 0
+#define TX_HIGHPWR_LEVEL_NORMAL1 1
+#define TX_HIGHPWR_LEVEL_NORMAL2 2
+
+#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
+#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
+
+#define DM_DIG_THRESH_HIGH 40
+#define DM_DIG_THRESH_LOW 35
+#define DM_FALSEALARM_THRESH_LOW 40
+#define DM_FALSEALARM_THRESH_HIGH 1000
+#define DM_DIG_HIGH_PWR_THRESH_HIGH 75
+#define DM_DIG_HIGH_PWR_THRESH_LOW 70
+#define DM_DIG_BACKOFF 12
+#define DM_DIG_MAX 0x3e
+#define DM_DIG_MIN 0x1c
+#define DM_DIG_MIN_Netcore 0x12
+#define DM_DIG_BACKOFF_MAX 12
+#define DM_DIG_BACKOFF_MIN -4
+
+extern struct dig_t digtable;
+
+void rtl92s_dm_watchdog(struct ieee80211_hw *hw);
+void rtl92s_dm_init(struct ieee80211_hw *hw);
+void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw);
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
new file mode 100644
index 0000000..3b5af01
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
@@ -0,0 +1,654 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "fw.h"
+
+static void _rtl92s_fw_set_rqpn(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtl_write_dword(rtlpriv, RQPN, 0xffffffff);
+ rtl_write_dword(rtlpriv, RQPN + 4, 0xffffffff);
+ rtl_write_byte(rtlpriv, RQPN + 8, 0xff);
+ rtl_write_byte(rtlpriv, RQPN + 0xB, 0x80);
+}
+
+static bool _rtl92s_firmware_enable_cpu(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 ichecktime = 200;
+ u16 tmpu2b;
+ u8 tmpu1b, cpustatus = 0;
+
+ _rtl92s_fw_set_rqpn(hw);
+
+ /* Enable CPU. */
+ tmpu1b = rtl_read_byte(rtlpriv, SYS_CLKR);
+ /* AFE source */
+ rtl_write_byte(rtlpriv, SYS_CLKR, (tmpu1b | SYS_CPU_CLKSEL));
+
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | FEN_CPUEN));
+
+ /* Polling IMEM Ready after CPU has refilled. */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & IMEM_RDY) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("IMEM Ready after CPU has refilled.\n"));
+ break;
+ }
+
+ udelay(100);
+ } while (ichecktime--);
+
+ if (!(cpustatus & IMEM_RDY))
+ return false;
+
+ return true;
+}
+
+static enum fw_status _rtl92s_firmware_get_nextstatus(
+ enum fw_status fw_currentstatus)
+{
+ enum fw_status next_fwstatus = 0;
+
+ switch (fw_currentstatus) {
+ case FW_STATUS_INIT:
+ next_fwstatus = FW_STATUS_LOAD_IMEM;
+ break;
+ case FW_STATUS_LOAD_IMEM:
+ next_fwstatus = FW_STATUS_LOAD_EMEM;
+ break;
+ case FW_STATUS_LOAD_EMEM:
+ next_fwstatus = FW_STATUS_LOAD_DMEM;
+ break;
+ case FW_STATUS_LOAD_DMEM:
+ next_fwstatus = FW_STATUS_READY;
+ break;
+ default:
+ break;
+ }
+
+ return next_fwstatus;
+}
+
+static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ switch (rtlphy->rf_type) {
+ case RF_1T1R:
+ return 0x11;
+ break;
+ case RF_1T2R:
+ return 0x12;
+ break;
+ case RF_2T2R:
+ return 0x22;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("Unknown RF type(%x)\n",
+ rtlphy->rf_type));
+ break;
+ }
+ return 0x22;
+}
+
+static void _rtl92s_firmwareheader_priveupdate(struct ieee80211_hw *hw,
+ struct fw_priv *pfw_priv)
+{
+ /* Update RF types for RATR settings. */
+ pfw_priv->rf_config = _rtl92s_firmware_header_map_rftype(hw);
+}
+
+
+
+static bool _rtl92s_cmd_send_packet(struct ieee80211_hw *hw,
+ struct sk_buff *skb, u8 last)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl8192_tx_ring *ring;
+ struct rtl_tx_desc *pdesc;
+ unsigned long flags;
+ u8 idx = 0;
+
+ ring = &rtlpci->tx_ring[TXCMD_QUEUE];
+
+ spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+ idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
+ pdesc = &ring->desc[idx];
+ rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *)pdesc, 1, 1, skb);
+ __skb_queue_tail(&ring->queue, skb);
+
+ spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+ return true;
+}
+
+static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
+ u8 *code_virtual_address, u32 buffer_len)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct sk_buff *skb;
+ struct rtl_tcb_desc *tcb_desc;
+ unsigned char *seg_ptr;
+ u16 frag_threshold = MAX_FIRMWARE_CODE_SIZE;
+ u16 frag_length, frag_offset = 0;
+ u16 extra_descoffset = 0;
+ u8 last_inipkt = 0;
+
+ _rtl92s_fw_set_rqpn(hw);
+
+ if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Size over FIRMWARE_CODE_SIZE!\n"));
+
+ return false;
+ }
+
+ extra_descoffset = 0;
+
+ do {
+ if ((buffer_len - frag_offset) > frag_threshold) {
+ frag_length = frag_threshold + extra_descoffset;
+ } else {
+ frag_length = (u16)(buffer_len - frag_offset +
+ extra_descoffset);
+ last_inipkt = 1;
+ }
+
+ /* Allocate skb buffer to contain firmware */
+ /* info and tx descriptor info. */
+ skb = dev_alloc_skb(frag_length);
+ skb_reserve(skb, extra_descoffset);
+ seg_ptr = (u8 *)skb_put(skb, (u32)(frag_length -
+ extra_descoffset));
+ memcpy(seg_ptr, code_virtual_address + frag_offset,
+ (u32)(frag_length - extra_descoffset));
+
+ tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+ tcb_desc->queue_index = TXCMD_QUEUE;
+ tcb_desc->cmd_or_init = DESC_PACKET_TYPE_INIT;
+ tcb_desc->last_inipkt = last_inipkt;
+
+ _rtl92s_cmd_send_packet(hw, skb, last_inipkt);
+
+ frag_offset += (frag_length - extra_descoffset);
+
+ } while (frag_offset < buffer_len);
+
+ rtl_write_byte(rtlpriv, TP_POLL, TPPOLL_CQ);
+
+ return true ;
+}
+
+static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
+ u8 loadfw_status)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rt_firmware *firmware = (struct rt_firmware *)rtlhal->pfirmware;
+ u32 tmpu4b;
+ u8 cpustatus = 0;
+ short pollingcnt = 1000;
+ bool rtstatus = true;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("LoadStaus(%d)\n",
+ loadfw_status));
+
+ firmware->fwstatus = (enum fw_status)loadfw_status;
+
+ switch (loadfw_status) {
+ case FW_STATUS_LOAD_IMEM:
+ /* Polling IMEM code done. */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & IMEM_CODE_DONE)
+ break;
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("FW_STATUS_LOAD_IMEM"
+ " FAIL CPU, Status=%x\r\n", cpustatus));
+ goto status_check_fail;
+ }
+ break;
+
+ case FW_STATUS_LOAD_EMEM:
+ /* Check Put Code OK and Turn On CPU */
+ /* Polling EMEM code done. */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & EMEM_CODE_DONE)
+ break;
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("FW_STATUS_LOAD_EMEM"
+ " FAIL CPU, Status=%x\r\n", cpustatus));
+ goto status_check_fail;
+ }
+
+ /* Turn On CPU */
+ rtstatus = _rtl92s_firmware_enable_cpu(hw);
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Enable CPU fail!\n"));
+ goto status_check_fail;
+ }
+ break;
+
+ case FW_STATUS_LOAD_DMEM:
+ /* Polling DMEM code done */
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & DMEM_CODE_DONE)
+ break;
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Polling DMEM code done"
+ " fail ! cpustatus(%#x)\n", cpustatus));
+ goto status_check_fail;
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("DMEM code download success,"
+ " cpustatus(%#x)\n", cpustatus));
+
+ /* Prevent Delay too much and being scheduled out */
+ /* Polling Load Firmware ready */
+ pollingcnt = 2000;
+ do {
+ cpustatus = rtl_read_byte(rtlpriv, TCR);
+ if (cpustatus & FWRDY)
+ break;
+ udelay(40);
+ } while (pollingcnt--);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Polling Load Firmware ready,"
+ " cpustatus(%x)\n", cpustatus));
+
+ if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
+ (pollingcnt <= 0)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Polling Load Firmware"
+ " ready fail ! cpustatus(%x)\n", cpustatus));
+ goto status_check_fail;
+ }
+
+ /* If right here, we can set TCR/RCR to desired value */
+ /* and config MAC lookback mode to normal mode */
+ tmpu4b = rtl_read_dword(rtlpriv, TCR);
+ rtl_write_dword(rtlpriv, TCR, (tmpu4b & (~TCR_ICV)));
+
+ tmpu4b = rtl_read_dword(rtlpriv, RCR);
+ rtl_write_dword(rtlpriv, RCR, (tmpu4b | RCR_APPFCS |
+ RCR_APP_ICV | RCR_APP_MIC));
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Current RCR settings(%#x)\n", tmpu4b));
+
+ /* Set to normal mode. */
+ rtl_write_byte(rtlpriv, LBKMD_SEL, LBK_NORMAL);
+ break;
+
+ default:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("Unknown status check!\n"));
+ rtstatus = false;
+ break;
+ }
+
+status_check_fail:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("loadfw_status(%d), "
+ "rtstatus(%x)\n", loadfw_status, rtstatus));
+ return rtstatus;
+}
+
+int rtl92s_download_fw(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rt_firmware *firmware = NULL;
+ struct fw_hdr *pfwheader;
+ struct fw_priv *pfw_priv = NULL;
+ u8 *puc_mappedfile = NULL;
+ u32 ul_filelength = 0;
+ u32 file_length = 0;
+ u8 fwhdr_size = RT_8192S_FIRMWARE_HDR_SIZE;
+ u8 fwstatus = FW_STATUS_INIT;
+ bool rtstatus = true;
+
+ if (!rtlhal->pfirmware)
+ return 1;
+
+ firmware = (struct rt_firmware *)rtlhal->pfirmware;
+ firmware->fwstatus = FW_STATUS_INIT;
+
+ puc_mappedfile = firmware->sz_fw_tmpbuffer;
+ file_length = firmware->sz_fw_tmpbufferlen;
+
+ /* 1. Retrieve FW header. */
+ firmware->pfwheader = (struct fw_hdr *) puc_mappedfile;
+ pfwheader = firmware->pfwheader;
+ firmware->firmwareversion = byte(pfwheader->version, 0);
+ firmware->pfwheader->fwpriv.hci_sel = 1;/* pcie */
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("signature:%x, version:"
+ "%x, size:%x,"
+ "imemsize:%x, sram size:%x\n", pfwheader->signature,
+ pfwheader->version, pfwheader->dmem_size,
+ pfwheader->img_imem_size, pfwheader->img_sram_size));
+
+ /* 2. Retrieve IMEM image. */
+ if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
+ sizeof(firmware->fw_imem))) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("memory for data image is less than IMEM required\n"));
+ goto fail;
+ } else {
+ puc_mappedfile += fwhdr_size;
+
+ memcpy(firmware->fw_imem, puc_mappedfile,
+ pfwheader->img_imem_size);
+ firmware->fw_imem_len = pfwheader->img_imem_size;
+ }
+
+ /* 3. Retriecve EMEM image. */
+ if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("memory for data image is less than EMEM required\n"));
+ goto fail;
+ } else {
+ puc_mappedfile += firmware->fw_imem_len;
+
+ memcpy(firmware->fw_emem, puc_mappedfile,
+ pfwheader->img_sram_size);
+ firmware->fw_emem_len = pfwheader->img_sram_size;
+ }
+
+ /* 4. download fw now */
+ fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus);
+ while (fwstatus != FW_STATUS_READY) {
+ /* Image buffer redirection. */
+ switch (fwstatus) {
+ case FW_STATUS_LOAD_IMEM:
+ puc_mappedfile = firmware->fw_imem;
+ ul_filelength = firmware->fw_imem_len;
+ break;
+ case FW_STATUS_LOAD_EMEM:
+ puc_mappedfile = firmware->fw_emem;
+ ul_filelength = firmware->fw_emem_len;
+ break;
+ case FW_STATUS_LOAD_DMEM:
+ /* Partial update the content of header private. */
+ pfwheader = firmware->pfwheader;
+ pfw_priv = &pfwheader->fwpriv;
+ _rtl92s_firmwareheader_priveupdate(hw, pfw_priv);
+ puc_mappedfile = (u8 *)(firmware->pfwheader) +
+ RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+ ul_filelength = fwhdr_size -
+ RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Unexpected Download step!!\n"));
+ goto fail;
+ break;
+ }
+
+ /* <2> Download image file */
+ rtstatus = _rtl92s_firmware_downloadcode(hw, puc_mappedfile,
+ ul_filelength);
+
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("fail!\n"));
+ goto fail;
+ }
+
+ /* <3> Check whether load FW process is ready */
+ rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("fail!\n"));
+ goto fail;
+ }
+
+ fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus);
+ }
+
+ return rtstatus;
+fail:
+ return 0;
+}
+
+static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
+ u32 cmd_num, u32 *pelement_id, u32 *pcmd_len,
+ u8 **pcmb_buffer, u8 *cmd_start_seq)
+{
+ u32 totallen = 0, len = 0, tx_desclen = 0;
+ u32 pre_continueoffset = 0;
+ u8 *ph2c_buffer;
+ u8 i = 0;
+
+ do {
+ /* 8 - Byte aligment */
+ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
+
+ /* Buffer length is not enough */
+ if (h2cbufferlen < totallen + len + tx_desclen)
+ break;
+
+ /* Clear content */
+ ph2c_buffer = (u8 *)skb_put(skb, (u32)len);
+ memset((ph2c_buffer + totallen + tx_desclen), 0, len);
+
+ /* CMD len */
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+ 0, 16, pcmd_len[i]);
+
+ /* CMD ID */
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+ 16, 8, pelement_id[i]);
+
+ /* CMD Sequence */
+ *cmd_start_seq = *cmd_start_seq % 0x80;
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen),
+ 24, 7, *cmd_start_seq);
+ ++*cmd_start_seq;
+
+ /* Copy memory */
+ memcpy((ph2c_buffer + totallen + tx_desclen +
+ H2C_TX_CMD_HDR_LEN), pcmb_buffer[i], pcmd_len[i]);
+
+ /* CMD continue */
+ /* set the continue in prevoius cmd. */
+ if (i < cmd_num - 1)
+ SET_BITS_TO_LE_4BYTE((ph2c_buffer + pre_continueoffset),
+ 31, 1, 1);
+
+ pre_continueoffset = totallen;
+
+ totallen += len;
+ } while (++i < cmd_num);
+
+ return totallen;
+}
+
+static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
+{
+ u32 totallen = 0, len = 0, tx_desclen = 0;
+ u8 i = 0;
+
+ do {
+ /* 8 - Byte aligment */
+ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
+
+ /* Buffer length is not enough */
+ if (h2cbufferlen < totallen + len + tx_desclen)
+ break;
+
+ totallen += len;
+ } while (++i < cmd_num);
+
+ return totallen + tx_desclen;
+}
+
+static bool _rtl92s_firmware_set_h2c_cmd(struct ieee80211_hw *hw, u8 h2c_cmd,
+ u8 *pcmd_buffer)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_tcb_desc *cb_desc;
+ struct sk_buff *skb;
+ u32 element_id = 0;
+ u32 cmd_len = 0;
+ u32 len;
+
+ switch (h2c_cmd) {
+ case FW_H2C_SETPWRMODE:
+ element_id = H2C_SETPWRMODE_CMD ;
+ cmd_len = sizeof(struct h2c_set_pwrmode_parm);
+ break;
+ case FW_H2C_JOINBSSRPT:
+ element_id = H2C_JOINBSSRPT_CMD;
+ cmd_len = sizeof(struct h2c_joinbss_rpt_parm);
+ break;
+ case FW_H2C_WOWLAN_UPDATE_GTK:
+ element_id = H2C_WOWLAN_UPDATE_GTK_CMD;
+ cmd_len = sizeof(struct h2c_wpa_two_way_parm);
+ break;
+ case FW_H2C_WOWLAN_UPDATE_IV:
+ element_id = H2C_WOWLAN_UPDATE_IV_CMD;
+ cmd_len = sizeof(unsigned long long);
+ break;
+ case FW_H2C_WOWLAN_OFFLOAD:
+ element_id = H2C_WOWLAN_FW_OFFLOAD;
+ cmd_len = sizeof(u8);
+ break;
+ default:
+ break;
+ }
+
+ len = _rtl92s_get_h2c_cmdlen(MAX_TRANSMIT_BUFFER_SIZE, 1, &cmd_len);
+ skb = dev_alloc_skb(len);
+ cb_desc = (struct rtl_tcb_desc *)(skb->cb);
+ cb_desc->queue_index = TXCMD_QUEUE;
+ cb_desc->cmd_or_init = DESC_PACKET_TYPE_NORMAL;
+ cb_desc->last_inipkt = false;
+
+ _rtl92s_fill_h2c_cmd(skb, MAX_TRANSMIT_BUFFER_SIZE, 1, &element_id,
+ &cmd_len, &pcmd_buffer, &rtlhal->h2c_txcmd_seq);
+ _rtl92s_cmd_send_packet(hw, skb, false);
+ rtlpriv->cfg->ops->tx_polling(hw, TXCMD_QUEUE);
+
+ return true;
+}
+
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 Mode)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct h2c_set_pwrmode_parm pwrmode;
+ u16 max_wakeup_period = 0;
+
+ pwrmode.mode = Mode;
+ pwrmode.flag_low_traffic_en = 0;
+ pwrmode.flag_lpnav_en = 0;
+ pwrmode.flag_rf_low_snr_en = 0;
+ pwrmode.flag_dps_en = 0;
+ pwrmode.bcn_rx_en = 0;
+ pwrmode.bcn_to = 0;
+ SET_BITS_TO_LE_2BYTE((u8 *)(&pwrmode) + 8, 0, 16,
+ mac->vif->bss_conf.beacon_int);
+ pwrmode.app_itv = 0;
+ pwrmode.awake_bcn_itvl = ppsc->reg_max_lps_awakeintvl;
+ pwrmode.smart_ps = 1;
+ pwrmode.bcn_pass_period = 10;
+
+ /* Set beacon pass count */
+ if (pwrmode.mode == FW_PS_MIN_MODE)
+ max_wakeup_period = mac->vif->bss_conf.beacon_int;
+ else if (pwrmode.mode == FW_PS_MAX_MODE)
+ max_wakeup_period = mac->vif->bss_conf.beacon_int *
+ mac->vif->bss_conf.dtim_period;
+
+ if (max_wakeup_period >= 500)
+ pwrmode.bcn_pass_cnt = 1;
+ else if ((max_wakeup_period >= 300) && (max_wakeup_period < 500))
+ pwrmode.bcn_pass_cnt = 2;
+ else if ((max_wakeup_period >= 200) && (max_wakeup_period < 300))
+ pwrmode.bcn_pass_cnt = 3;
+ else if ((max_wakeup_period >= 20) && (max_wakeup_period < 200))
+ pwrmode.bcn_pass_cnt = 5;
+ else
+ pwrmode.bcn_pass_cnt = 1;
+
+ _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SETPWRMODE, (u8 *)&pwrmode);
+
+}
+
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+ u8 mstatus, u8 ps_qosinfo)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct h2c_joinbss_rpt_parm joinbss_rpt;
+
+ joinbss_rpt.opmode = mstatus;
+ joinbss_rpt.ps_qos_info = ps_qosinfo;
+ joinbss_rpt.bssid[0] = mac->bssid[0];
+ joinbss_rpt.bssid[1] = mac->bssid[1];
+ joinbss_rpt.bssid[2] = mac->bssid[2];
+ joinbss_rpt.bssid[3] = mac->bssid[3];
+ joinbss_rpt.bssid[4] = mac->bssid[4];
+ joinbss_rpt.bssid[5] = mac->bssid[5];
+ SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 8, 0, 16,
+ mac->vif->bss_conf.beacon_int);
+ SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 10, 0, 16, mac->assoc_id);
+
+ _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_JOINBSSRPT, (u8 *)&joinbss_rpt);
+}
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
new file mode 100644
index 0000000..74cc503
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
@@ -0,0 +1,375 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_FIRMWARE92S_H__
+#define __REALTEK_FIRMWARE92S_H__
+
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000
+#define RTL8190_CPU_START_OFFSET 0x80
+/* Firmware Local buffer size. 64k */
+#define MAX_FIRMWARE_CODE_SIZE 0xFF00
+
+#define RT_8192S_FIRMWARE_HDR_SIZE 80
+#define RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE 32
+
+/* support till 64 bit bus width OS */
+#define MAX_DEV_ADDR_SIZE 8
+#define MAX_FIRMWARE_INFORMATION_SIZE 32
+#define MAX_802_11_HEADER_LENGTH (40 + \
+ MAX_FIRMWARE_INFORMATION_SIZE)
+#define ENCRYPTION_MAX_OVERHEAD 128
+#define MAX_FRAGMENT_COUNT 8
+#define MAX_TRANSMIT_BUFFER_SIZE (1600 + \
+ (MAX_802_11_HEADER_LENGTH + \
+ ENCRYPTION_MAX_OVERHEAD) *\
+ MAX_FRAGMENT_COUNT)
+
+#define H2C_TX_CMD_HDR_LEN 8
+
+/* The following DM control code are for Reg0x364, */
+#define FW_DIG_ENABLE_CTL BIT(0)
+#define FW_HIGH_PWR_ENABLE_CTL BIT(1)
+#define FW_SS_CTL BIT(2)
+#define FW_RA_INIT_CTL BIT(3)
+#define FW_RA_BG_CTL BIT(4)
+#define FW_RA_N_CTL BIT(5)
+#define FW_PWR_TRK_CTL BIT(6)
+#define FW_IQK_CTL BIT(7)
+#define FW_FA_CTL BIT(8)
+#define FW_DRIVER_CTRL_DM_CTL BIT(9)
+#define FW_PAPE_CTL_BY_SW_HW BIT(10)
+#define FW_DISABLE_ALL_DM 0
+#define FW_PWR_TRK_PARAM_CLR 0x0000ffff
+#define FW_RA_PARAM_CLR 0xffff0000
+
+enum desc_packet_type {
+ DESC_PACKET_TYPE_INIT = 0,
+ DESC_PACKET_TYPE_NORMAL = 1,
+};
+
+/* 8-bytes alignment required */
+struct fw_priv {
+ /* --- long word 0 ---- */
+ /* 0x12: CE product, 0x92: IT product */
+ u8 signature_0;
+ /* 0x87: CE product, 0x81: IT product */
+ u8 signature_1;
+ /* 0x81: PCI-AP, 01:PCIe, 02: 92S-U,
+ * 0x82: USB-AP, 0x12: 72S-U, 03:SDIO */
+ u8 hci_sel;
+ /* the same value as reigster value */
+ u8 chip_version;
+ /* customer ID low byte */
+ u8 customer_id_0;
+ /* customer ID high byte */
+ u8 customer_id_1;
+ /* 0x11: 1T1R, 0x12: 1T2R,
+ * 0x92: 1T2R turbo, 0x22: 2T2R */
+ u8 rf_config;
+ /* 4: 4EP, 6: 6EP, 11: 11EP */
+ u8 usb_ep_num;
+
+ /* --- long word 1 ---- */
+ /* regulatory class bit map 0 */
+ u8 regulatory_class_0;
+ /* regulatory class bit map 1 */
+ u8 regulatory_class_1;
+ /* regulatory class bit map 2 */
+ u8 regulatory_class_2;
+ /* regulatory class bit map 3 */
+ u8 regulatory_class_3;
+ /* 0:SWSI, 1:HWSI, 2:HWPI */
+ u8 rfintfs;
+ u8 def_nettype;
+ u8 rsvd010;
+ u8 rsvd011;
+
+ /* --- long word 2 ---- */
+ /* 0x00: normal, 0x03: MACLBK, 0x01: PHYLBK */
+ u8 lbk_mode;
+ /* 1: for MP use, 0: for normal
+ * driver (to be discussed) */
+ u8 mp_mode;
+ u8 rsvd020;
+ u8 rsvd021;
+ u8 rsvd022;
+ u8 rsvd023;
+ u8 rsvd024;
+ u8 rsvd025;
+
+ /* --- long word 3 ---- */
+ /* QoS enable */
+ u8 qos_en;
+ /* 40MHz BW enable */
+ /* 4181 convert AMSDU to AMPDU, 0: disable */
+ u8 bw_40mhz_en;
+ u8 amsdu2ampdu_en;
+ /* 11n AMPDU enable */
+ u8 ampdu_en;
+ /* FW offloads, 0: driver handles */
+ u8 rate_control_offload;
+ /* FW offloads, 0: driver handles */
+ u8 aggregation_offload;
+ u8 rsvd030;
+ u8 rsvd031;
+
+ /* --- long word 4 ---- */
+ /* 1. FW offloads, 0: driver handles */
+ u8 beacon_offload;
+ /* 2. FW offloads, 0: driver handles */
+ u8 mlme_offload;
+ /* 3. FW offloads, 0: driver handles */
+ u8 hwpc_offload;
+ /* 4. FW offloads, 0: driver handles */
+ u8 tcp_checksum_offload;
+ /* 5. FW offloads, 0: driver handles */
+ u8 tcp_offload;
+ /* 6. FW offloads, 0: driver handles */
+ u8 ps_control_offload;
+ /* 7. FW offloads, 0: driver handles */
+ u8 wwlan_offload;
+ u8 rsvd040;
+
+ /* --- long word 5 ---- */
+ /* tcp tx packet length low byte */
+ u8 tcp_tx_frame_len_L;
+ /* tcp tx packet length high byte */
+ u8 tcp_tx_frame_len_H;
+ /* tcp rx packet length low byte */
+ u8 tcp_rx_frame_len_L;
+ /* tcp rx packet length high byte */
+ u8 tcp_rx_frame_len_H;
+ u8 rsvd050;
+ u8 rsvd051;
+ u8 rsvd052;
+ u8 rsvd053;
+};
+
+/* 8-byte alinment required */
+struct fw_hdr {
+
+ /* --- LONG WORD 0 ---- */
+ u16 signature;
+ /* 0x8000 ~ 0x8FFF for FPGA version,
+ * 0x0000 ~ 0x7FFF for ASIC version, */
+ u16 version;
+ /* define the size of boot loader */
+ u32 dmem_size;
+
+
+ /* --- LONG WORD 1 ---- */
+ /* define the size of FW in IMEM */
+ u32 img_imem_size;
+ /* define the size of FW in SRAM */
+ u32 img_sram_size;
+
+ /* --- LONG WORD 2 ---- */
+ /* define the size of DMEM variable */
+ u32 fw_priv_size;
+ u32 rsvd0;
+
+ /* --- LONG WORD 3 ---- */
+ u32 rsvd1;
+ u32 rsvd2;
+
+ struct fw_priv fwpriv;
+
+} ;
+
+enum fw_status {
+ FW_STATUS_INIT = 0,
+ FW_STATUS_LOAD_IMEM = 1,
+ FW_STATUS_LOAD_EMEM = 2,
+ FW_STATUS_LOAD_DMEM = 3,
+ FW_STATUS_READY = 4,
+};
+
+struct rt_firmware {
+ struct fw_hdr *pfwheader;
+ enum fw_status fwstatus;
+ u16 firmwareversion;
+ u8 fw_imem[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+ u8 fw_emem[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+ u32 fw_imem_len;
+ u32 fw_emem_len;
+ u8 sz_fw_tmpbuffer[164000];
+ u32 sz_fw_tmpbufferlen;
+ u16 cmdpacket_fragthresold;
+};
+
+struct h2c_set_pwrmode_parm {
+ u8 mode;
+ u8 flag_low_traffic_en;
+ u8 flag_lpnav_en;
+ u8 flag_rf_low_snr_en;
+ /* 1: dps, 0: 32k */
+ u8 flag_dps_en;
+ u8 bcn_rx_en;
+ u8 bcn_pass_cnt;
+ /* beacon TO (ms). ¡§=0¡¨ no limit. */
+ u8 bcn_to;
+ u16 bcn_itv;
+ /* only for VOIP mode. */
+ u8 app_itv;
+ u8 awake_bcn_itvl;
+ u8 smart_ps;
+ /* unit: 100 ms */
+ u8 bcn_pass_period;
+};
+
+struct h2c_joinbss_rpt_parm {
+ u8 opmode;
+ u8 ps_qos_info;
+ u8 bssid[6];
+ u16 bcnitv;
+ u16 aid;
+} ;
+
+struct h2c_wpa_ptk {
+ /* EAPOL-Key Key Confirmation Key (KCK) */
+ u8 kck[16];
+ /* EAPOL-Key Key Encryption Key (KEK) */
+ u8 kek[16];
+ /* Temporal Key 1 (TK1) */
+ u8 tk1[16];
+ union {
+ /* Temporal Key 2 (TK2) */
+ u8 tk2[16];
+ struct {
+ u8 tx_mic_key[8];
+ u8 rx_mic_key[8];
+ } athu;
+ } u;
+};
+
+struct h2c_wpa_two_way_parm {
+ /* algorithm TKIP or AES */
+ u8 pairwise_en_alg;
+ u8 group_en_alg;
+ struct h2c_wpa_ptk wpa_ptk_value;
+} ;
+
+enum h2c_cmd {
+ FW_H2C_SETPWRMODE = 0,
+ FW_H2C_JOINBSSRPT = 1,
+ FW_H2C_WOWLAN_UPDATE_GTK = 2,
+ FW_H2C_WOWLAN_UPDATE_IV = 3,
+ FW_H2C_WOWLAN_OFFLOAD = 4,
+};
+
+enum fw_h2c_cmd {
+ H2C_READ_MACREG_CMD, /*0*/
+ H2C_WRITE_MACREG_CMD,
+ H2C_READBB_CMD,
+ H2C_WRITEBB_CMD,
+ H2C_READRF_CMD,
+ H2C_WRITERF_CMD, /*5*/
+ H2C_READ_EEPROM_CMD,
+ H2C_WRITE_EEPROM_CMD,
+ H2C_READ_EFUSE_CMD,
+ H2C_WRITE_EFUSE_CMD,
+ H2C_READ_CAM_CMD, /*10*/
+ H2C_WRITE_CAM_CMD,
+ H2C_SETBCNITV_CMD,
+ H2C_SETMBIDCFG_CMD,
+ H2C_JOINBSS_CMD,
+ H2C_DISCONNECT_CMD, /*15*/
+ H2C_CREATEBSS_CMD,
+ H2C_SETOPMode_CMD,
+ H2C_SITESURVEY_CMD,
+ H2C_SETAUTH_CMD,
+ H2C_SETKEY_CMD, /*20*/
+ H2C_SETSTAKEY_CMD,
+ H2C_SETASSOCSTA_CMD,
+ H2C_DELASSOCSTA_CMD,
+ H2C_SETSTAPWRSTATE_CMD,
+ H2C_SETBASICRATE_CMD, /*25*/
+ H2C_GETBASICRATE_CMD,
+ H2C_SETDATARATE_CMD,
+ H2C_GETDATARATE_CMD,
+ H2C_SETPHYINFO_CMD,
+ H2C_GETPHYINFO_CMD, /*30*/
+ H2C_SETPHY_CMD,
+ H2C_GETPHY_CMD,
+ H2C_READRSSI_CMD,
+ H2C_READGAIN_CMD,
+ H2C_SETATIM_CMD, /*35*/
+ H2C_SETPWRMODE_CMD,
+ H2C_JOINBSSRPT_CMD,
+ H2C_SETRATABLE_CMD,
+ H2C_GETRATABLE_CMD,
+ H2C_GETCCXREPORT_CMD, /*40*/
+ H2C_GETDTMREPORT_CMD,
+ H2C_GETTXRATESTATICS_CMD,
+ H2C_SETUSBSUSPEND_CMD,
+ H2C_SETH2CLBK_CMD,
+ H2C_TMP1, /*45*/
+ H2C_WOWLAN_UPDATE_GTK_CMD,
+ H2C_WOWLAN_FW_OFFLOAD,
+ H2C_TMP2,
+ H2C_TMP3,
+ H2C_WOWLAN_UPDATE_IV_CMD, /*50*/
+ H2C_TMP4,
+ MAX_H2CCMD /*52*/
+};
+
+/* The following macros are used for FW
+ * CMD map and parameter updated. */
+#define FW_CMD_IO_CLR(rtlpriv, _Bit) \
+ do { \
+ udelay(1000); \
+ rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit); \
+ } while (0);
+
+#define FW_CMD_IO_UPDATE(rtlpriv, _val) \
+ rtlpriv->rtlhal.fwcmd_iomap = _val;
+
+#define FW_CMD_IO_SET(rtlpriv, _val) \
+ do { \
+ rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val); \
+ FW_CMD_IO_UPDATE(rtlpriv, _val); \
+ } while (0);
+
+#define FW_CMD_PARA_SET(rtlpriv, _val) \
+ do { \
+ rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val); \
+ rtlpriv->rtlhal.fwcmd_ioparam = _val; \
+ } while (0);
+
+#define FW_CMD_IO_QUERY(rtlpriv) \
+ (u16)(rtlpriv->rtlhal.fwcmd_iomap)
+#define FW_CMD_IO_PARA_QUERY(rtlpriv) \
+ ((u32)(rtlpriv->rtlhal.fwcmd_ioparam))
+
+int rtl92s_download_fw(struct ieee80211_hw *hw);
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+ u8 mstatus, u8 ps_qosinfo);
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
new file mode 100644
index 0000000..2e9005d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -0,0 +1,2512 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "hw.h"
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ switch (variable) {
+ case HW_VAR_RCR: {
+ *((u32 *) (val)) = rtlpci->receive_config;
+ break;
+ }
+ case HW_VAR_RF_STATE: {
+ *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS: {
+ *((bool *) (val)) = ppsc->fw_current_inpsmode;
+ break;
+ }
+ case HW_VAR_CORRECT_TSF: {
+ u64 tsf;
+ u32 *ptsf_low = (u32 *)&tsf;
+ u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+ *ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4));
+ *ptsf_low = rtl_read_dword(rtlpriv, TSFR);
+
+ *((u64 *) (val)) = tsf;
+
+ break;
+ }
+ case HW_VAR_MRC: {
+ *((bool *)(val)) = rtlpriv->dm.current_mrc_switch;
+ break;
+ }
+ default: {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ }
+}
+
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ switch (variable) {
+ case HW_VAR_ETHER_ADDR:{
+ rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]);
+ rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]);
+ break;
+ }
+ case HW_VAR_BASIC_RATE:{
+ u16 rate_cfg = ((u16 *) val)[0];
+ u8 rate_index = 0;
+
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rate_cfg = rate_cfg & 0x150;
+ else
+ rate_cfg = rate_cfg & 0x15f;
+
+ rate_cfg |= 0x01;
+
+ rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff);
+ rtl_write_byte(rtlpriv, RRSR + 1,
+ (rate_cfg >> 8) & 0xff);
+
+ while (rate_cfg > 0x1) {
+ rate_cfg = (rate_cfg >> 1);
+ rate_index++;
+ }
+ rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index);
+
+ break;
+ }
+ case HW_VAR_BSSID:{
+ rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]);
+ rtl_write_word(rtlpriv, BSSIDR + 4,
+ ((u16 *)(val + 4))[0]);
+ break;
+ }
+ case HW_VAR_SIFS:{
+ rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]);
+ rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]);
+ break;
+ }
+ case HW_VAR_SLOT_TIME:{
+ u8 e_aci;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("HW_VAR_SLOT_TIME %x\n", val[0]));
+
+ rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
+
+ for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_AC_PARAM,
+ (u8 *)(&e_aci));
+ }
+ break;
+ }
+ case HW_VAR_ACK_PREAMBLE:{
+ u8 reg_tmp;
+ u8 short_preamble = (bool) (*(u8 *) val);
+ reg_tmp = (mac->cur_40_prime_sc) << 5;
+ if (short_preamble)
+ reg_tmp |= 0x80;
+
+ rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp);
+ break;
+ }
+ case HW_VAR_AMPDU_MIN_SPACE:{
+ u8 min_spacing_to_set;
+ u8 sec_min_space;
+
+ min_spacing_to_set = *((u8 *)val);
+ if (min_spacing_to_set <= 7) {
+ if (rtlpriv->sec.pairwise_enc_algorithm ==
+ NO_ENCRYPTION)
+ sec_min_space = 0;
+ else
+ sec_min_space = 1;
+
+ if (min_spacing_to_set < sec_min_space)
+ min_spacing_to_set = sec_min_space;
+ if (min_spacing_to_set > 5)
+ min_spacing_to_set = 5;
+
+ mac->min_space_cfg =
+ ((mac->min_space_cfg & 0xf8) |
+ min_spacing_to_set);
+
+ *val = min_spacing_to_set;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+ mac->min_space_cfg));
+
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+ }
+ break;
+ }
+ case HW_VAR_SHORTGI_DENSITY:{
+ u8 density_to_set;
+
+ density_to_set = *((u8 *) val);
+ mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
+ mac->min_space_cfg |= (density_to_set << 3);
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+ mac->min_space_cfg));
+
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+
+ break;
+ }
+ case HW_VAR_AMPDU_FACTOR:{
+ u8 factor_toset;
+ u8 regtoset;
+ u8 factorlevel[18] = {
+ 2, 4, 4, 7, 7, 13, 13,
+ 13, 2, 7, 7, 13, 13,
+ 15, 15, 15, 15, 0};
+ u8 index = 0;
+
+ factor_toset = *((u8 *) val);
+ if (factor_toset <= 3) {
+ factor_toset = (1 << (factor_toset + 2));
+ if (factor_toset > 0xf)
+ factor_toset = 0xf;
+
+ for (index = 0; index < 17; index++) {
+ if (factorlevel[index] > factor_toset)
+ factorlevel[index] =
+ factor_toset;
+ }
+
+ for (index = 0; index < 8; index++) {
+ regtoset = ((factorlevel[index * 2]) |
+ (factorlevel[index *
+ 2 + 1] << 4));
+ rtl_write_byte(rtlpriv,
+ AGGLEN_LMT_L + index,
+ regtoset);
+ }
+
+ regtoset = ((factorlevel[16]) |
+ (factorlevel[17] << 4));
+ rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
+ factor_toset));
+ }
+ break;
+ }
+ case HW_VAR_AC_PARAM:{
+ u8 e_aci = *((u8 *) val);
+ rtl92s_dm_init_edca_turbo(hw);
+
+ if (rtlpci->acm_method != eAcmWay2_SW)
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_ACM_CTRL,
+ (u8 *)(&e_aci));
+ break;
+ }
+ case HW_VAR_ACM_CTRL:{
+ u8 e_aci = *((u8 *) val);
+ union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&(
+ mac->ac[0].aifs));
+ u8 acm = p_aci_aifsn->f.acm;
+ u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl);
+
+ acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?
+ 0x0 : 0x1);
+
+ if (acm) {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl |= AcmHw_BeqEn;
+ break;
+ case AC2_VI:
+ acm_ctrl |= AcmHw_ViqEn;
+ break;
+ case AC3_VO:
+ acm_ctrl |= AcmHw_VoqEn;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("HW_VAR_ACM_CTRL acm set "
+ "failed: eACI is %d\n", acm));
+ break;
+ }
+ } else {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl &= (~AcmHw_BeqEn);
+ break;
+ case AC2_VI:
+ acm_ctrl &= (~AcmHw_ViqEn);
+ break;
+ case AC3_VO:
+ acm_ctrl &= (~AcmHw_BeqEn);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ }
+
+ RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+ ("HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl));
+ rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
+ break;
+ }
+ case HW_VAR_RCR:{
+ rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]);
+ rtlpci->receive_config = ((u32 *) (val))[0];
+ break;
+ }
+ case HW_VAR_RETRY_LIMIT:{
+ u8 retry_limit = ((u8 *) (val))[0];
+
+ rtl_write_word(rtlpriv, RETRY_LIMIT,
+ retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+ retry_limit << RETRY_LIMIT_LONG_SHIFT);
+ break;
+ }
+ case HW_VAR_DUAL_TSF_RST: {
+ break;
+ }
+ case HW_VAR_EFUSE_BYTES: {
+ rtlefuse->efuse_usedbytes = *((u16 *) val);
+ break;
+ }
+ case HW_VAR_EFUSE_USAGE: {
+ rtlefuse->efuse_usedpercentage = *((u8 *) val);
+ break;
+ }
+ case HW_VAR_IO_CMD: {
+ break;
+ }
+ case HW_VAR_WPA_CONFIG: {
+ rtl_write_byte(rtlpriv, REG_SECR, *((u8 *) val));
+ break;
+ }
+ case HW_VAR_SET_RPWM:{
+ break;
+ }
+ case HW_VAR_H2C_FW_PWRMODE:{
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS: {
+ ppsc->fw_current_inpsmode = *((bool *) val);
+ break;
+ }
+ case HW_VAR_H2C_FW_JOINBSSRPT:{
+ break;
+ }
+ case HW_VAR_AID:{
+ break;
+ }
+ case HW_VAR_CORRECT_TSF:{
+ break;
+ }
+ case HW_VAR_MRC: {
+ bool bmrc_toset = *((bool *)val);
+ u8 u1bdata = 0;
+
+ if (bmrc_toset) {
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE0, 0x33);
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM1_TRXPATHENABLE,
+ MASKBYTE0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+ MASKBYTE0,
+ ((u1bdata & 0xf0) | 0x03));
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM0_TRXPATHENABLE,
+ MASKBYTE1);
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE1,
+ (u1bdata | 0x04));
+
+ /* Update current settings. */
+ rtlpriv->dm.current_mrc_switch = bmrc_toset;
+ } else {
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE0, 0x13);
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM1_TRXPATHENABLE,
+ MASKBYTE0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+ MASKBYTE0,
+ ((u1bdata & 0xf0) | 0x01));
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM0_TRXPATHENABLE,
+ MASKBYTE1);
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE1, (u1bdata & 0xfb));
+
+ /* Update current settings. */
+ rtlpriv->dm.current_mrc_switch = bmrc_toset;
+ }
+
+ break;
+ }
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+
+}
+
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 sec_reg_value = 0x0;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("PairwiseEncAlgorithm = %d "
+ "GroupEncAlgorithm = %d\n",
+ rtlpriv->sec.pairwise_enc_algorithm,
+ rtlpriv->sec.group_enc_algorithm));
+
+ if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("not open hw encryption\n"));
+ return;
+ }
+
+ sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
+
+ if (rtlpriv->sec.use_defaultkey) {
+ sec_reg_value |= SCR_TXUSEDK;
+ sec_reg_value |= SCR_RXUSEDK;
+ }
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, ("The SECR-value %x\n",
+ sec_reg_value));
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+
+}
+
+static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 waitcount = 100;
+ bool bresult = false;
+ u8 tmpvalue;
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+ /* Wait the MAC synchronized. */
+ udelay(400);
+
+ /* Check if it is set ready. */
+ tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ bresult = ((tmpvalue & BIT(7)) == (data & BIT(7)));
+
+ if ((data & (BIT(6) | BIT(7))) == false) {
+ waitcount = 100;
+ tmpvalue = 0;
+
+ while (1) {
+ waitcount--;
+
+ tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ if ((tmpvalue & BIT(6)))
+ break;
+
+ printk(KERN_ERR "wait for BIT(6) return value %x\n",
+ tmpvalue);
+ if (waitcount == 0)
+ break;
+
+ udelay(10);
+ }
+
+ if (waitcount == 0)
+ bresult = false;
+ else
+ bresult = true;
+ }
+
+ return bresult;
+}
+
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1tmp;
+
+ /* The following config GPIO function */
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+ /* config GPIO3 to input */
+ u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+ rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+}
+
+static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1tmp;
+ u8 retval = ERFON;
+
+ /* The following config GPIO function */
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+ /* config GPIO3 to input */
+ u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+ rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+ /* On some of the platform, driver cannot read correct
+ * value without delay between Write_GPIO_SEL and Read_GPIO_IN */
+ mdelay(10);
+
+ /* check GPIO3 */
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IN);
+ retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF;
+
+ return retval;
+}
+
+static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ u8 i;
+ u8 tmpu1b;
+ u16 tmpu2b;
+ u8 pollingcnt = 20;
+
+ if (rtlpci->first_init) {
+ /* Reset PCIE Digital */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ tmpu1b &= 0xFE;
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ udelay(1);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0));
+ }
+
+ /* Switch to SW IO control */
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ if (tmpu1b & BIT(7)) {
+ tmpu1b &= ~(BIT(6) | BIT(7));
+
+ /* Set failed, return to prevent hang. */
+ if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+ return;
+ }
+
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+ udelay(50);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+ udelay(50);
+
+ /* Clear FW RPWM for FW control LPS.*/
+ rtl_write_byte(rtlpriv, RPWM, 0x0);
+
+ /* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ tmpu1b &= 0x73;
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ /* wait for BIT 10/11/15 to pull high automatically!! */
+ mdelay(1);
+
+ rtl_write_byte(rtlpriv, CMDR, 0);
+ rtl_write_byte(rtlpriv, TCR, 0);
+
+ /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+ tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+ tmpu1b |= 0x08;
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+ tmpu1b &= ~(BIT(3));
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+ /* Enable AFE clock source */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+ /* Delay 1.5ms */
+ mdelay(2);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+ /* Enable AFE Macro Block's Bandgap */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Enable AFE Mbias */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+ mdelay(1);
+
+ /* Enable LDOA15 block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+ /* Set Digital Vdd to Retention isolation Path. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+ /* For warm reboot NIC disappera bug. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
+
+ /* Enable AFE PLL Macro Block */
+ /* We need to delay 100u before enabling PLL. */
+ udelay(200);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+
+ /* for divider reset */
+ udelay(100);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) |
+ BIT(4) | BIT(6)));
+ udelay(10);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+ udelay(10);
+
+ /* Enable MAC 80MHZ clock */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Release isolation AFE PLL & MD */
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
+
+ /* Enable MAC clock */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+ /* Enable Core digital and enable IOREG R/W */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7)));
+
+ /* enable REG_EN */
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+ /* Switch the control path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+ if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+ return; /* Set failed, return to prevent hang. */
+
+ rtl_write_word(rtlpriv, CMDR, 0x07FC);
+
+ /* MH We must enable the section of code to prevent load IMEM fail. */
+ /* Load MAC register from WMAc temporarily We simulate macreg. */
+ /* txt HW will provide MAC txt later */
+ rtl_write_byte(rtlpriv, 0x6, 0x30);
+ rtl_write_byte(rtlpriv, 0x49, 0xf0);
+
+ rtl_write_byte(rtlpriv, 0x4b, 0x81);
+
+ rtl_write_byte(rtlpriv, 0xb5, 0x21);
+
+ rtl_write_byte(rtlpriv, 0xdc, 0xff);
+ rtl_write_byte(rtlpriv, 0xdd, 0xff);
+ rtl_write_byte(rtlpriv, 0xde, 0xff);
+ rtl_write_byte(rtlpriv, 0xdf, 0xff);
+
+ rtl_write_byte(rtlpriv, 0x11a, 0x00);
+ rtl_write_byte(rtlpriv, 0x11b, 0x00);
+
+ for (i = 0; i < 32; i++)
+ rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b);
+
+ rtl_write_byte(rtlpriv, 0x236, 0xff);
+
+ rtl_write_byte(rtlpriv, 0x503, 0x22);
+
+ if (ppsc->support_aspm && !ppsc->support_backdoor)
+ rtl_write_byte(rtlpriv, 0x560, 0x40);
+ else
+ rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+ rtl_write_byte(rtlpriv, DBG_PORT, 0x91);
+
+ /* Set RX Desc Address */
+ rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
+ rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma);
+
+ /* Set TX Desc Address */
+ rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma);
+ rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma);
+ rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma);
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+ /* To make sure that TxDMA can ready to download FW. */
+ /* We should reset TxDMA if IMEM RPT was not ready. */
+ do {
+ tmpu1b = rtl_read_byte(rtlpriv, TCR);
+ if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
+ break;
+
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (pollingcnt <= 0) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Polling TXDMA_INIT_VALUE "
+ "timeout!! Current TCR(%#x)\n", tmpu1b));
+ tmpu1b = rtl_read_byte(rtlpriv, CMDR);
+ rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
+ udelay(2);
+ /* Reset TxDMA */
+ rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN);
+ }
+
+ /* After MACIO reset,we must refresh LED state. */
+ if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) ||
+ (ppsc->rfoff_reason == 0)) {
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+ enum rf_pwrstate rfpwr_state_toset;
+ rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw);
+
+ if (rfpwr_state_toset == ERFON)
+ rtl92se_sw_led_on(hw, pLed0);
+ }
+}
+
+static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ u8 i;
+ u16 tmpu2b;
+
+ /* 1. System Configure Register (Offset: 0x0000 - 0x003F) */
+
+ /* 2. Command Control Register (Offset: 0x0040 - 0x004F) */
+ /* Turn on 0x40 Command register */
+ rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN |
+ SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN |
+ RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN));
+
+ /* Set TCR TX DMA pre 2 FULL enable bit */
+ rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) |
+ TXDMAPRE2FULL);
+
+ /* Set RCR */
+ rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
+ /* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */
+
+ /* 4. Timing Control Register (Offset: 0x0080 - 0x009F) */
+ /* Set CCK/OFDM SIFS */
+ /* CCK SIFS shall always be 10us. */
+ rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a);
+ rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010);
+
+ /* Set AckTimeout */
+ rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40);
+
+ /* Beacon related */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, 100);
+ rtl_write_word(rtlpriv, ATIMWND, 2);
+
+ /* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */
+ /* 5.1 Initialize Number of Reserved Pages in Firmware Queue */
+ /* Firmware allocate now, associate with FW internal setting.!!! */
+
+ /* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */
+ /* 5.3 Set driver info, we only accept PHY status now. */
+ /* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO */
+ rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6));
+
+ /* 6. Adaptive Control Register (Offset: 0x0160 - 0x01CF) */
+ /* Set RRSR to all legacy rate and HT rate
+ * CCK rate is supported by default.
+ * CCK rate will be filtered out only when associated
+ * AP does not support it.
+ * Only enable ACK rate to OFDM 24M
+ * Disable RRSR for CCK rate in A-Cut */
+
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_byte(rtlpriv, RRSR, 0xf0);
+ else if (rtlhal->version == VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RRSR, 0xff);
+ rtl_write_byte(rtlpriv, RRSR + 1, 0x01);
+ rtl_write_byte(rtlpriv, RRSR + 2, 0x00);
+
+ /* A-Cut IC do not support CCK rate. We forbid ARFR to */
+ /* fallback to CCK rate */
+ for (i = 0; i < 8; i++) {
+ /*Disable RRSR for CCK rate in A-Cut */
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0);
+ }
+
+ /* Different rate use different AMPDU size */
+ /* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */
+ rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f);
+ /* MCS0/1/2/3 use max AMPDU size 4*2=8K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442);
+ /* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7);
+ /* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772);
+ /* MCS12/13/14/15 use max AMPDU size 15*2=30K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd);
+
+ /* Set Data / Response auto rate fallack retry count */
+ rtl_write_dword(rtlpriv, DARFRC, 0x04010000);
+ rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605);
+ rtl_write_dword(rtlpriv, RARFRC, 0x04010000);
+ rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605);
+
+ /* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */
+ /* Set all rate to support SG */
+ rtl_write_word(rtlpriv, SG_RATE, 0xFFFF);
+
+ /* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */
+ /* Set NAV protection length */
+ rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080);
+ /* CF-END Threshold */
+ rtl_write_byte(rtlpriv, CFEND_TH, 0xFF);
+ /* Set AMPDU minimum space */
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07);
+ /* Set TXOP stall control for several queue/HI/BCN/MGT/ */
+ rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00);
+
+ /* 9. Security Control Register (Offset: 0x0240 - 0x025F) */
+ /* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */
+ /* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */
+ /* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */
+ /* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */
+
+ /* 14. Set driver info, we only accept PHY status now. */
+ rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4);
+
+ /* 15. For EEPROM R/W Workaround */
+ /* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */
+ tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13));
+ tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8)));
+
+ /* 17. For EFUSE */
+ /* We may R/W EFUSE in EEPROM mode */
+ if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ u8 tempval;
+
+ tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+ tempval &= 0xFE;
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval);
+
+ /* Change Program timing */
+ rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("EFUSE CONFIG OK\n"));
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("OK\n"));
+
+}
+
+static void _rtl92se_hw_configure(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ u8 reg_bw_opmode = 0;
+ u32 reg_ratr = 0, reg_rrsr = 0;
+ u8 regtmp = 0;
+
+ reg_bw_opmode = BW_OPMODE_20MHZ;
+ reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS |
+ RATE_ALL_OFDM_2SS;
+ reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+ regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL);
+ reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp;
+ rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr);
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+
+ /* Set Retry Limit here */
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
+ (u8 *)(&rtlpci->shortretry_limit));
+
+ rtl_write_byte(rtlpriv, MLT, 0x8f);
+
+ /* For Min Spacing configuration. */
+ switch (rtlphy->rf_type) {
+ case RF_1T2R:
+ case RF_1T1R:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
+ break;
+ case RF_2T2R:
+ case RF_2T2R_GREEN:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
+ break;
+ }
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg);
+}
+
+int rtl92se_hw_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 tmp_byte = 0;
+
+ bool rtstatus = true;
+ u8 tmp_u1b;
+ int err = false;
+ u8 i;
+ int wdcapra_add[] = {
+ EDCAPARA_BE, EDCAPARA_BK,
+ EDCAPARA_VI, EDCAPARA_VO};
+ u8 secr_value = 0x0;
+
+ rtlpci->being_init_adapter = true;
+
+ rtlpriv->intf_ops->disable_aspm(hw);
+
+ /* 1. MAC Initialize */
+ /* Before FW download, we have to set some MAC register */
+ _rtl92se_macconfig_before_fwdownload(hw);
+
+ rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
+ PMC_FSM) >> 16) & 0xF);
+
+ rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+ /* 2. download firmware */
+ rtstatus = rtl92s_download_fw(hw);
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("Failed to download FW. "
+ "Init HW without FW now.., Please copy FW into"
+ "/lib/firmware/rtlwifi\n"));
+ rtlhal->fw_ready = false;
+ } else {
+ rtlhal->fw_ready = true;
+ }
+
+ /* After FW download, we have to reset MAC register */
+ _rtl92se_macconfig_after_fwdownload(hw);
+
+ /*Retrieve default FW Cmd IO map. */
+ rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, LBUS_MON_ADDR);
+ rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
+
+ /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
+ if (rtl92s_phy_mac_config(hw) != true) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("MAC Config failed\n"));
+ return rtstatus;
+ }
+
+ /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
+ /* We must set flag avoid BB/RF config period later!! */
+ rtl_write_dword(rtlpriv, CMDR, 0x37FC);
+
+ /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
+ if (rtl92s_phy_bb_config(hw) != true) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("BB Config failed\n"));
+ return rtstatus;
+ }
+
+ /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
+ /* Before initalizing RF. We can not use FW to do RF-R/W. */
+
+ rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+
+ /* RF Power Save */
+#if 0
+ /* H/W or S/W RF OFF before sleep. */
+ if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) {
+ u32 rfoffreason = rtlpriv->psc.rfoff_reason;
+
+ rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT;
+ rtlpriv->psc.rfpwr_state = ERFON;
+ rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason, true);
+ } else {
+ /* gpio radio on/off is out of adapter start */
+ if (rtlpriv->psc.hwradiooff == false) {
+ rtlpriv->psc.rfpwr_state = ERFON;
+ rtlpriv->psc.rfoff_reason = 0;
+ }
+ }
+#endif
+
+ /* Before RF-R/W we must execute the IO from Scott's suggestion. */
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07);
+ else
+ rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
+
+ if (rtl92s_phy_rf_config(hw) != true) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("RF Config failed\n"));
+ return rtstatus;
+ }
+
+ /* After read predefined TXT, we must set BB/MAC/RF
+ * register as our requirement */
+
+ rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
+ (enum radio_path)0,
+ RF_CHNLBW,
+ RFREG_OFFSET_MASK);
+ rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
+ (enum radio_path)1,
+ RF_CHNLBW,
+ RFREG_OFFSET_MASK);
+
+ /*---- Set CCK and OFDM Block "ON"----*/
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+
+ /*3 Set Hardware(Do nothing now) */
+ _rtl92se_hw_configure(hw);
+
+ /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
+ /* TX power index for different rate set. */
+ /* Get original hw reg values */
+ rtl92s_phy_get_hw_reg_originalvalue(hw);
+ /* Write correct tx power index */
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+ /* We must set MAC address after firmware download. */
+ for (i = 0; i < 6; i++)
+ rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+ /* EEPROM R/W workaround */
+ tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG);
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3)));
+
+ rtl_write_byte(rtlpriv, 0x4d, 0x0);
+
+ if (hal_get_firmwareversion(rtlpriv) >= 0x49) {
+ tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4));
+ tmp_byte = tmp_byte | BIT(5);
+ rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte);
+ rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF);
+ }
+
+ /* We enable high power and RA related mechanism after NIC
+ * initialized. */
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+
+ /* Add to prevent ASPM bug. */
+ /* Always enable hst and NIC clock request. */
+ rtl92s_phy_switch_ephy_parameter(hw);
+
+ /* Security related
+ * 1. Clear all H/W keys.
+ * 2. Enable H/W encryption/decryption. */
+ rtl_cam_reset_all_entry(hw);
+ secr_value |= SCR_TXENCENABLE;
+ secr_value |= SCR_RXENCENABLE;
+ secr_value |= SCR_NOSKMC;
+ rtl_write_byte(rtlpriv, REG_SECR, secr_value);
+
+ for (i = 0; i < 4; i++)
+ rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
+
+ if (rtlphy->rf_type == RF_1T2R) {
+ bool mrc2set = true;
+ /* Turn on B-Path */
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
+ }
+
+ rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
+ rtl92s_dm_init(hw);
+ rtlpci->being_init_adapter = false;
+
+ return err;
+}
+
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr)
+{
+}
+
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ u32 reg_rcr = rtlpci->receive_config;
+
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (check_bssid == true) {
+ reg_rcr |= (RCR_CBSSID);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ } else if (check_bssid == false) {
+ reg_rcr &= (~RCR_CBSSID);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ }
+
+}
+
+static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
+ enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+ enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
+ u32 temp;
+ bt_msr &= ~MSR_LINK_MASK;
+
+ switch (type) {
+ case NL80211_IFTYPE_UNSPECIFIED:
+ bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
+ ledaction = LED_CTL_LINK;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to NO LINK!\n"));
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to Ad Hoc!\n"));
+ break;
+ case NL80211_IFTYPE_STATION:
+ bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
+ ledaction = LED_CTL_LINK;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to STA!\n"));
+ break;
+ case NL80211_IFTYPE_AP:
+ bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to AP!\n"));
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Network type %d not support!\n", type));
+ return 1;
+ break;
+
+ }
+
+ rtl_write_byte(rtlpriv, (MSR), bt_msr);
+
+ temp = rtl_read_dword(rtlpriv, TCR);
+ rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8)));
+ rtl_write_dword(rtlpriv, TCR, temp | BIT(8));
+
+
+ return 0;
+}
+
+/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */
+int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (_rtl92se_set_media_status(hw, type))
+ return -EOPNOTSUPP;
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92se_set_check_bssid(hw, true);
+ } else {
+ rtl92se_set_check_bssid(hw, false);
+ }
+
+ return 0;
+}
+
+/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl92s_dm_init_edca_turbo(hw);
+
+ switch (aci) {
+ case AC1_BK:
+ rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f);
+ break;
+ case AC0_BE:
+ /* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */
+ break;
+ case AC2_VI:
+ rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322);
+ break;
+ case AC3_VO:
+ rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
+ break;
+ default:
+ RT_ASSERT(false, ("invalid aci: %d !\n", aci));
+ break;
+ }
+}
+
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
+ /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
+ rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
+
+ rtlpci->irq_enabled = true;
+}
+
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtl_write_dword(rtlpriv, INTA_MASK, 0);
+ rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
+
+ rtlpci->irq_enabled = false;
+}
+
+
+static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 waitcnt = 100;
+ bool result = false;
+ u8 tmp;
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+ /* Wait the MAC synchronized. */
+ udelay(400);
+
+ /* Check if it is set ready. */
+ tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ result = ((tmp & BIT(7)) == (data & BIT(7)));
+
+ if ((data & (BIT(6) | BIT(7))) == false) {
+ waitcnt = 100;
+ tmp = 0;
+
+ while (1) {
+ waitcnt--;
+ tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+
+ if ((tmp & BIT(6)))
+ break;
+
+ printk(KERN_ERR "wait for BIT(6) return value %x\n",
+ tmp);
+
+ if (waitcnt == 0)
+ break;
+ udelay(10);
+ }
+
+ if (waitcnt == 0)
+ result = false;
+ else
+ result = true;
+ }
+
+ return result;
+}
+
+static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ u8 u1btmp;
+
+ if (rtlhal->driver_going2unload)
+ rtl_write_byte(rtlpriv, 0x560, 0x0);
+
+ /* Power save for BB/RF */
+ u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ u1btmp |= BIT(0);
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+ rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ udelay(100);
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ rtl_write_word(rtlpriv, CMDR, 0x0000);
+
+ if (rtlhal->driver_going2unload) {
+ u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1));
+ u1btmp &= ~(BIT(0));
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp);
+ }
+
+ u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+
+ /* Add description. After switch control path. register
+ * after page1 will be invisible. We can not do any IO
+ * for register>0x40. After resume&MACIO reset, we need
+ * to remember previous reg content. */
+ if (u1btmp & BIT(7)) {
+ u1btmp &= ~(BIT(6) | BIT(7));
+ if (!_rtl92s_set_sysclk(hw, u1btmp)) {
+ printk(KERN_ERR "Switch ctrl path fail\n");
+ return;
+ }
+ }
+
+ /* Power save for MAC */
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS &&
+ !rtlhal->driver_going2unload) {
+ /* enable LED function */
+ rtl_write_byte(rtlpriv, 0x03, 0xF9);
+ /* SW/HW radio off or halt adapter!! For example S3/S4 */
+ } else {
+ /* LED function disable. Power range is about 8mA now. */
+ /* if write 0xF1 disconnet_pci power
+ * ifconfig wlan0 down power are both high 35:70 */
+ /* if write oxF9 disconnet_pci power
+ * ifconfig wlan0 down power are both low 12:45*/
+ rtl_write_byte(rtlpriv, 0x03, 0xF9);
+ }
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x00);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+}
+
+static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+
+ if (rtlpci->up_first_time == 1)
+ return;
+
+ if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS)
+ rtl92se_sw_led_on(hw, pLed0);
+ else
+ rtl92se_sw_led_off(hw, pLed0);
+}
+
+
+static void _rtl92se_power_domain_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 tmpu2b;
+ u8 tmpu1b;
+
+ rtlpriv->psc.pwrdomain_protect = true;
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ if (tmpu1b & BIT(7)) {
+ tmpu1b &= ~(BIT(6) | BIT(7));
+ if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+ rtlpriv->psc.pwrdomain_protect = false;
+ return;
+ }
+ }
+
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+
+ /* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */
+ tmpu1b = rtl_read_byte(rtlpriv, SYS_FUNC_EN + 1);
+
+ /* If IPS we need to turn LED on. So we not
+ * not disable BIT 3/7 of reg3. */
+ if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW))
+ tmpu1b &= 0xFB;
+ else
+ tmpu1b &= 0x73;
+
+ rtl_write_byte(rtlpriv, SYS_FUNC_EN + 1, tmpu1b);
+ /* wait for BIT 10/11/15 to pull high automatically!! */
+ mdelay(1);
+
+ rtl_write_byte(rtlpriv, CMDR, 0);
+ rtl_write_byte(rtlpriv, TCR, 0);
+
+ /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+ tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+ tmpu1b |= 0x08;
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+ tmpu1b &= ~(BIT(3));
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+ /* Enable AFE clock source */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+ /* Delay 1.5ms */
+ udelay(1500);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+ /* Enable AFE Macro Block's Bandgap */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Enable AFE Mbias */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+ mdelay(1);
+
+ /* Enable LDOA15 block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+ /* Set Digital Vdd to Retention isolation Path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_ISO_CTRL);
+ rtl_write_word(rtlpriv, SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+
+ /* For warm reboot NIC disappera bug. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+ rtl_write_byte(rtlpriv, SYS_ISO_CTRL + 1, 0x68);
+
+ /* Enable AFE PLL Macro Block */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+ /* Enable MAC 80MHZ clock */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Release isolation AFE PLL & MD */
+ rtl_write_byte(rtlpriv, SYS_ISO_CTRL, 0xA6);
+
+ /* Enable MAC clock */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+ /* Enable Core digital and enable IOREG R/W */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11)));
+ /* enable REG_EN */
+ rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+ /* Switch the control path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+ if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+ rtlpriv->psc.pwrdomain_protect = false;
+ return;
+ }
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+ /* After MACIO reset,we must refresh LED state. */
+ _rtl92se_gen_refreshledstate(hw);
+
+ rtlpriv->psc.pwrdomain_protect = false;
+}
+
+void rtl92se_card_disable(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ enum nl80211_iftype opmode;
+ u8 wait = 30;
+
+ rtlpriv->intf_ops->enable_aspm(hw);
+
+ if (rtlpci->driver_is_goingto_unload ||
+ ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+ rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+
+ /* we should chnge GPIO to input mode
+ * this will drop away current about 25mA*/
+ rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+ /* this is very important for ips power save */
+ while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
+ if (rtlpriv->psc.pwrdomain_protect)
+ mdelay(20);
+ else
+ break;
+ }
+
+ mac->link_state = MAC80211_NOLINK;
+ opmode = NL80211_IFTYPE_UNSPECIFIED;
+ _rtl92se_set_media_status(hw, opmode);
+
+ _rtl92s_phy_set_rfhalt(hw);
+ udelay(100);
+}
+
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta,
+ u32 *p_intb)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+ rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+ *p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1];
+ rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+}
+
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcntime_cfg = 0;
+ u16 bcn_cw = 6, bcn_ifs = 0xf;
+ u16 atim_window = 2;
+
+ /* ATIM Window (in unit of TU). */
+ rtl_write_word(rtlpriv, ATIMWND, atim_window);
+
+ /* Beacon interval (in unit of TU). */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval);
+
+ /* DrvErlyInt (in unit of TU). (Time to send
+ * interrupt to notify driver to change
+ * beacon content) */
+ rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4);
+
+ /* BcnDMATIM(in unit of us). Indicates the
+ * time before TBTT to perform beacon queue DMA */
+ rtl_write_word(rtlpriv, BCN_DMATIME, 256);
+
+ /* Force beacon frame transmission even
+ * after receiving beacon frame from
+ * other ad hoc STA */
+ rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100);
+
+ /* Beacon Time Configuration */
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT);
+
+ /* TODO: bcn_ifs may required to be changed on ASIC */
+ bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS;
+
+ /*for beacon changed */
+ rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval);
+}
+
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcn_interval = mac->beacon_interval;
+
+ /* Beacon interval (in unit of TU). */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval);
+ /* 2008.10.24 added by tynli for beacon changed. */
+ rtl92s_phy_set_beacon_hwreg(hw, bcn_interval);
+}
+
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+ u32 add_msr, u32 rm_msr)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+ ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+
+ if (add_msr)
+ rtlpci->irq_mask[0] |= add_msr;
+
+ if (rm_msr)
+ rtlpci->irq_mask[0] &= (~rm_msr);
+
+ rtl92se_disable_interrupt(hw);
+ rtl92se_enable_interrupt(hw);
+}
+
+static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw)
+{
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 efuse_id;
+
+ rtlhal->ic_class = IC_INFERIORITY_A;
+
+ /* Only retrieving while using EFUSE. */
+ if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) &&
+ !rtlefuse->autoload_failflag) {
+ efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET);
+
+ if (efuse_id == 0xfe)
+ rtlhal->ic_class = IC_INFERIORITY_B;
+ }
+}
+
+static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u16 i, usvalue;
+ u16 eeprom_id;
+ u8 tempval;
+ u8 hwinfo[HWSET_MAX_SIZE_92S];
+ u8 rf_path, index;
+
+ if (rtlefuse->epromtype == EEPROM_93C46) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("RTL819X Not boot from eeprom, check it !!"));
+ } else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ rtl_efuse_shadow_map_update(hw);
+
+ memcpy((void *)hwinfo, (void *)
+ &rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+ HWSET_MAX_SIZE_92S);
+ }
+
+ RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
+ hwinfo, HWSET_MAX_SIZE_92S);
+
+ eeprom_id = *((u16 *)&hwinfo[0]);
+ if (eeprom_id != RTL8190_EEPROM_ID) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
+ rtlefuse->autoload_failflag = true;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+ rtlefuse->autoload_failflag = false;
+ }
+
+ if (rtlefuse->autoload_failflag == true)
+ return;
+
+ _rtl8192se_get_IC_Inferiority(hw);
+
+ /* Read IC Version && Channel Plan */
+ /* VID, DID SE 0xA-D */
+ rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+ rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+ rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+ rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+ rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROMId = 0x%4x\n", eeprom_id));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
+
+ for (i = 0; i < 6; i += 2) {
+ usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+ *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+ }
+
+ for (i = 0; i < 6; i++)
+ rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+ (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr)));
+
+ /* Get Tx Power Level by Channel */
+ /* Read Tx power of Channel 1 ~ 14 from EEPROM. */
+ /* 92S suupport RF A & B */
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ /* Read CCK RF A & B Tx power */
+ rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] =
+ hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i];
+
+ /* Read OFDM RF A & B Tx power for 1T */
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+ hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i];
+
+ /* Read OFDM RF A & B Tx power for 2T */
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][i]
+ = hwinfo[EEPROM_TXPOWERBASE + 12 +
+ rf_path * 3 + i];
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ ("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path,
+ i, rtlefuse->eeprom_chnlarea_txpwr_cck
+ [rf_path][i]));
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ ("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+ [rf_path][i]));
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ ("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+ [rf_path][i]));
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+
+ /* Assign dedicated channel tx power */
+ for (i = 0; i < 14; i++) {
+ /* channel 1~3 use the same Tx Power Level. */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-14 */
+ else
+ index = 2;
+
+ /* Record A & B CCK /OFDM - 1T/2T Channel area
+ * tx power */
+ rtlefuse->txpwrlevel_cck[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_cck
+ [rf_path][index];
+ rtlefuse->txpwrlevel_ht40_1s[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+ [rf_path][index];
+ rtlefuse->txpwrlevel_ht40_2s[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+ [rf_path][index];
+ }
+
+ for (i = 0; i < 14; i++) {
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = "
+ "[0x%x / 0x%x / 0x%x]\n", rf_path, i,
+ rtlefuse->txpwrlevel_cck[rf_path][i],
+ rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+ rtlefuse->txpwrlevel_ht40_2s[rf_path][i]));
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ /* Read Power diff limit. */
+ rtlefuse->eeprom_pwrgroup[rf_path][i] =
+ hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i];
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ /* Fill Pwr group */
+ for (i = 0; i < 14; i++) {
+ /* Chanel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-13 */
+ else
+ index = 2;
+
+ rtlefuse->pwrgroup_ht20[rf_path][i] =
+ (rtlefuse->eeprom_pwrgroup[rf_path][index] &
+ 0xf);
+ rtlefuse->pwrgroup_ht40[rf_path][i] =
+ ((rtlefuse->eeprom_pwrgroup[rf_path][index] &
+ 0xf0) >> 4);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+ rf_path, i,
+ rtlefuse->pwrgroup_ht20[rf_path][i]));
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+ rf_path, i,
+ rtlefuse->pwrgroup_ht40[rf_path][i]));
+ }
+ }
+
+ for (i = 0; i < 14; i++) {
+ /* Read tx power difference between HT OFDM 20/40 MHZ */
+ /* channel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-14 */
+ else
+ index = 2;
+
+ tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_HT20_DIFF +
+ index]) & 0xff;
+ rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
+ rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
+ ((tempval >> 4) & 0xF);
+
+ /* Read OFDM<->HT tx power diff */
+ /* Channel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 0x11;
+ /* Channel 9-14 */
+ else
+ index = 1;
+
+ tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index])
+ & 0xff;
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] =
+ (tempval & 0xF);
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
+ ((tempval >> 4) & 0xF);
+
+ tempval = (*(u8 *)&hwinfo[TX_PWR_SAFETY_CHK]);
+ rtlefuse->txpwr_safetyflag = (tempval & 0x01);
+ }
+
+ rtlefuse->eeprom_regulatory = 0;
+ if (rtlefuse->eeprom_version >= 2) {
+ /* BIT(0)~2 */
+ if (rtlefuse->eeprom_version >= 4)
+ rtlefuse->eeprom_regulatory =
+ (hwinfo[EEPROM_REGULATORY] & 0x7);
+ else /* BIT(0) */
+ rtlefuse->eeprom_regulatory =
+ (hwinfo[EEPROM_REGULATORY] & 0x1);
+ }
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
+
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+ rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]));
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i,
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]));
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+ rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]));
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ ("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i,
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]));
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPwrSafetyFlag = %d\n",
+ rtlefuse->txpwr_safetyflag));
+
+ /* Read RF-indication and Tx Power gain
+ * index diff of legacy to HT OFDM rate. */
+ tempval = (*(u8 *)&hwinfo[EEPROM_RFIND_POWERDIFF]) & 0xff;
+ rtlefuse->eeprom_txpowerdiff = tempval;
+ rtlefuse->legacy_httxpowerdiff =
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPowerDiff = %#x\n",
+ rtlefuse->eeprom_txpowerdiff));
+
+ /* Get TSSI value for each path. */
+ usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
+ rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8);
+ usvalue = *(u8 *)&hwinfo[EEPROM_TSSI_B];
+ rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+ rtlefuse->eeprom_tssi[RF90_PATH_A],
+ rtlefuse->eeprom_tssi[RF90_PATH_B]));
+
+ /* Read antenna tx power offset of B/C/D to A from EEPROM */
+ /* and read ThermalMeter from EEPROM */
+ tempval = *(u8 *)&hwinfo[EEPROM_THERMALMETER];
+ rtlefuse->eeprom_thermalmeter = tempval;
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("thermalmeter = 0x%x\n",
+ rtlefuse->eeprom_thermalmeter));
+
+ /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
+ rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
+ rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100;
+
+ /* Read CrystalCap from EEPROM */
+ tempval = (*(u8 *)&hwinfo[EEPROM_CRYSTALCAP]) >> 4;
+ rtlefuse->eeprom_crystalcap = tempval;
+ /* CrystalCap, BIT(12)~15 */
+ rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap;
+
+ /* Read IC Version && Channel Plan */
+ /* Version ID, Channel plan */
+ rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+ rtlefuse->txpwr_fromeprom = true;
+ RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("EEPROM ChannelPlan = 0x%4x\n",
+ rtlefuse->eeprom_channelplan));
+
+ /* Read Customer ID or Board Type!!! */
+ tempval = *(u8 *)&hwinfo[EEPROM_BOARDTYPE];
+ /* Change RF type definition */
+ if (tempval == 0)
+ rtlphy->rf_type = RF_2T2R;
+ else if (tempval == 1)
+ rtlphy->rf_type = RF_1T2R;
+ else if (tempval == 2)
+ rtlphy->rf_type = RF_1T2R;
+ else if (tempval == 3)
+ rtlphy->rf_type = RF_1T1R;
+
+ /* 1T2R but 1SS (1x1 receive combining) */
+ rtlefuse->b1x1_recvcombine = false;
+ if (rtlphy->rf_type == RF_1T2R) {
+ tempval = rtl_read_byte(rtlpriv, 0x07);
+ if (!(tempval & BIT(0))) {
+ rtlefuse->b1x1_recvcombine = true;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("RF_TYPE=1T2R but only 1SS\n"));
+ }
+ }
+ rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
+ rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMID];
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("EEPROM Customer ID: 0x%2x",
+ rtlefuse->eeprom_oemid));
+
+ /* set channel paln to world wide 13 */
+ rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+}
+
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 tmp_u1b = 0;
+
+ tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
+
+ if (tmp_u1b & BIT(4)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
+ rtlefuse->epromtype = EEPROM_93C46;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
+ rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+ }
+
+ if (tmp_u1b & BIT(5)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+ rtlefuse->autoload_failflag = false;
+ _rtl92se_read_adapter_info(hw);
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
+ rtlefuse->autoload_failflag = true;
+ }
+}
+
+static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
+ u8 ratr_index = 0;
+ u8 nmode = mac->ht_enable;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate = 0;
+ u32 tmp_ratr_value = 0;
+ u8 curtxbw_40mhz = mac->bw_40;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = mac->mode;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ ratr_value &= 0x0000000D;
+ break;
+ case WIRELESS_MODE_G:
+ ratr_value &= 0x00000FF5;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ nmode = 1;
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ ratr_value &= 0x0007F005;
+ } else {
+ u32 ratr_mask;
+
+ if (get_rf_type(rtlphy) == RF_1T2R ||
+ get_rf_type(rtlphy) == RF_1T1R) {
+ if (curtxbw_40mhz)
+ ratr_mask = 0x000ff015;
+ else
+ ratr_mask = 0x000ff005;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_mask = 0x0f0ff015;
+ else
+ ratr_mask = 0x0f0ff005;
+ }
+
+ ratr_value &= ratr_mask;
+ }
+ break;
+ default:
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_value &= 0x000ff0ff;
+ else
+ ratr_value &= 0x0f0ff0ff;
+
+ break;
+ }
+
+ if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+ ratr_value &= 0x0FFFFFFF;
+ else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+ ratr_value &= 0x0FFFFFF0;
+
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
+
+ ratr_value |= 0x10000000;
+ tmp_ratr_value = (ratr_value >> 12);
+
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & tmp_ratr_value)
+ break;
+ }
+
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+
+ rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+ }
+
+ rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value);
+ if (ratr_value & 0xfffff000)
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N);
+ else
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+ ("%x\n", rtl_read_dword(rtlpriv, ARFR0)));
+}
+
+static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index = 0;
+ u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ ? 1 : 0;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
+ bool shortgi = false;
+ u32 ratr_value = 0;
+ u8 shortgi_rate = 0;
+ u32 mask = 0;
+ u32 band = 0;
+ bool bmulticast = false;
+ u8 macid = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ band |= WIRELESS_11B;
+ ratr_index = RATR_INX_WIRELESS_B;
+ if (ratr_bitmap & 0x0000000c)
+ ratr_bitmap &= 0x0000000d;
+ else
+ ratr_bitmap &= 0x0000000f;
+ break;
+ case WIRELESS_MODE_G:
+ band |= (WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_GB;
+
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00000f00;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x00000ff0;
+ else
+ ratr_bitmap &= 0x00000ff5;
+ break;
+ case WIRELESS_MODE_A:
+ band |= WIRELESS_11A;
+ ratr_index = RATR_INX_WIRELESS_A;
+ ratr_bitmap &= 0x00000ff0;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00070000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x0007f000;
+ else
+ ratr_bitmap &= 0x0007f005;
+ } else {
+ if (rtlphy->rf_type == RF_1T2R ||
+ rtlphy->rf_type == RF_1T1R) {
+ if (rssi_level == 1) {
+ ratr_bitmap &= 0x000f0000;
+ } else if (rssi_level == 3) {
+ ratr_bitmap &= 0x000fc000;
+ } else if (rssi_level == 5) {
+ ratr_bitmap &= 0x000ff000;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_bitmap &= 0x000ff015;
+ else
+ ratr_bitmap &= 0x000ff005;
+ }
+ } else {
+ if (rssi_level == 1) {
+ ratr_bitmap &= 0x0f8f0000;
+ } else if (rssi_level == 3) {
+ ratr_bitmap &= 0x0f8fc000;
+ } else if (rssi_level == 5) {
+ ratr_bitmap &= 0x0f8ff000;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_bitmap &= 0x0f8ff015;
+ else
+ ratr_bitmap &= 0x0f8ff005;
+ }
+ }
+ }
+
+ if ((curtxbw_40mhz && curshortgi_40mhz) ||
+ (!curtxbw_40mhz && curshortgi_20mhz)) {
+ if (macid == 0)
+ shortgi = true;
+ else if (macid == 1)
+ shortgi = false;
+ }
+ break;
+ default:
+ band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_bitmap &= 0x000ff0ff;
+ else
+ ratr_bitmap &= 0x0f8ff0ff;
+ break;
+ }
+
+ if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+ ratr_bitmap &= 0x0FFFFFFF;
+ else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+ ratr_bitmap &= 0x0FFFFFF0;
+
+ if (shortgi) {
+ ratr_bitmap |= 0x10000000;
+ /* Get MAX MCS available. */
+ ratr_value = (ratr_bitmap >> 12);
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & ratr_value)
+ break;
+ }
+
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+ rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+ }
+
+ mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, ("mask = %x, bitmap = %x\n",
+ mask, ratr_bitmap));
+ rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
+ rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92se_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92se_update_hal_rate_table(hw, sta);
+}
+
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 sifs_timer;
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+ (u8 *)&mac->slot_time);
+ sifs_timer = 0x0e0e;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+
+}
+
+/* this ifunction is for RFKILL, it's different with windows,
+ * because UI will disable wireless when GPIO Radio Off.
+ * And here we not check or Disable/Enable ASPM like windows*/
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ enum rf_pwrstate rfpwr_toset, cur_rfstate;
+ unsigned long flag = 0;
+ bool actuallyset = false;
+ bool turnonbypowerdomain = false;
+
+ /* just 8191se can check gpio before firstup, 92c/92d have fixed it */
+ if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
+ return false;
+
+ if (ppsc->swrf_processing)
+ return false;
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ if (ppsc->rfchange_inprogress) {
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ return false;
+ } else {
+ ppsc->rfchange_inprogress = true;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ cur_rfstate = ppsc->rfpwr_state;
+
+ /* because after _rtl92s_phy_set_rfhalt, all power
+ * closed, so we must open some power for GPIO check,
+ * or we will always check GPIO RFOFF here,
+ * And we should close power after GPIO check */
+ if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+ _rtl92se_power_domain_init(hw);
+ turnonbypowerdomain = true;
+ }
+
+ rfpwr_toset = _rtl92se_rf_onoff_detect(hw);
+
+ if ((ppsc->hwradiooff == true) && (rfpwr_toset == ERFON)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("RFKILL-HW Radio ON, RF ON\n"));
+
+ rfpwr_toset = ERFON;
+ ppsc->hwradiooff = false;
+ actuallyset = true;
+ } else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("RFKILL-HW Radio OFF, RF OFF\n"));
+
+ rfpwr_toset = ERFOFF;
+ ppsc->hwradiooff = true;
+ actuallyset = true;
+ }
+
+ if (actuallyset) {
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+ /* this not include ifconfig wlan0 down case */
+ /* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */
+ } else {
+ /* because power_domain_init may be happen when
+ * _rtl92s_phy_set_rfhalt, this will open some powers
+ * and cause current increasing about 40 mA for ips,
+ * rfoff and ifconfig down, so we set
+ * _rtl92s_phy_set_rfhalt again here */
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC &&
+ turnonbypowerdomain) {
+ _rtl92s_phy_set_rfhalt(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ }
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ *valid = 1;
+ return !ppsc->hwradiooff;
+
+}
+
+/* Is_wepkey just used for WEP used as group & pairwise key
+ * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
+ bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 *macaddr = p_macaddr;
+
+ u32 entry_id = 0;
+ bool is_pairwise = false;
+
+ static u8 cam_const_addr[4][6] = {
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+ };
+ static u8 cam_const_broad[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+
+ if (clear_all) {
+ u8 idx = 0;
+ u8 cam_offset = 0;
+ u8 clear_number = 5;
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
+
+ for (idx = 0; idx < clear_number; idx++) {
+ rtl_cam_mark_invalid(hw, cam_offset + idx);
+ rtl_cam_empty_entry(hw, cam_offset + idx);
+
+ if (idx < 5) {
+ memset(rtlpriv->sec.key_buf[idx], 0,
+ MAX_KEY_LEN);
+ rtlpriv->sec.key_len[idx] = 0;
+ }
+ }
+
+ } else {
+ switch (enc_algo) {
+ case WEP40_ENCRYPTION:
+ enc_algo = CAM_WEP40;
+ break;
+ case WEP104_ENCRYPTION:
+ enc_algo = CAM_WEP104;
+ break;
+ case TKIP_ENCRYPTION:
+ enc_algo = CAM_TKIP;
+ break;
+ case AESCCMP_ENCRYPTION:
+ enc_algo = CAM_AES;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ enc_algo = CAM_TKIP;
+ break;
+ }
+
+ if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+ macaddr = cam_const_addr[key_index];
+ entry_id = key_index;
+ } else {
+ if (is_group) {
+ macaddr = cam_const_broad;
+ entry_id = key_index;
+ } else {
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv,
+ COMP_SEC, DBG_EMERG,
+ ("Can not find free hw"
+ " security cam entry\n"));
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
+ key_index = PAIRWISE_KEYIDX;
+ is_pairwise = true;
+ }
+ }
+
+ if (rtlpriv->sec.key_len[key_index] == 0) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("delete one entry, entry_id is %d\n",
+ entry_id));
+ if (mac->opmode == NL80211_IFTYPE_AP)
+ rtl_cam_del_entry(hw, p_macaddr);
+ rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("The insert KEY length is %d\n",
+ rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("The insert KEY is %x %x\n",
+ rtlpriv->sec.key_buf[0][0],
+ rtlpriv->sec.key_buf[0][1]));
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("add one entry\n"));
+ if (is_pairwise) {
+ RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
+ "Pairwiase Key content :",
+ rtlpriv->sec.pairwise_key,
+ rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("set Pairwiase key\n"));
+
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[key_index]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("set group key\n"));
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ rtl_cam_add_one_entry(hw,
+ rtlefuse->dev_addr,
+ PAIRWISE_KEYIDX,
+ CAM_PAIRWISE_KEY_POSITION,
+ enc_algo, CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+
+ }
+ }
+}
+
+void rtl92se_suspend(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtlpci->up_first_time = true;
+}
+
+void rtl92se_resume(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ u32 val;
+
+ pci_read_config_dword(rtlpci->pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(rtlpci->pdev, 0x40,
+ val & 0xffff00ff);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.h b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
new file mode 100644
index 0000000..6160a9b
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_HW_H__
+#define __REALTEK_PCI92SE_HW_H__
+
+#define MSR_LINK_MANAGED 2
+#define MSR_LINK_NONE 0
+#define MSR_LINK_SHIFT 0
+#define MSR_LINK_ADHOC 1
+#define MSR_LINK_MASTER 3
+
+enum WIRELESS_NETWORK_TYPE {
+ WIRELESS_11B = 1,
+ WIRELESS_11G = 2,
+ WIRELESS_11A = 4,
+ WIRELESS_11N = 8
+};
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw,
+ u8 variable, u8 *val);
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw);
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw,
+ u32 *inta, u32 *intb);
+int rtl92se_hw_init(struct ieee80211_hw *hw);
+void rtl92se_card_disable(struct ieee80211_hw *hw);
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw);
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw);
+int rtl92se_set_network_type(struct ieee80211_hw *hw,
+ enum nl80211_iftype type);
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr);
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci);
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw);
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw);
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+ u32 add_msr, u32 rm_msr);
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable,
+ u8 *val);
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level);
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw);
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw,
+ u8 *valid);
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw);
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw);
+void rtl92se_set_key(struct ieee80211_hw *hw,
+ u32 key_index, u8 *macaddr, bool is_group,
+ u8 enc_algo, bool is_wepkey, bool clear_all);
+void rtl92se_suspend(struct ieee80211_hw *hw);
+void rtl92se_resume(struct ieee80211_hw *hw);
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/led.c b/drivers/net/wireless/rtlwifi/rtl8192se/led.c
new file mode 100644
index 0000000..6d4f666
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/led.c
@@ -0,0 +1,149 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "reg.h"
+#include "led.h"
+
+static void _rtl92se_init_led(struct ieee80211_hw *hw,
+ struct rtl_led *pled, enum rtl_led_pin ledpin)
+{
+ pled->hw = hw;
+ pled->ledpin = ledpin;
+ pled->ledon = false;
+}
+
+void rtl92se_init_sw_leds(struct ieee80211_hw *hw)
+{
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ _rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0);
+ _rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1);
+}
+
+void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+ u8 ledcfg;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+ ("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin));
+
+ ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
+
+ switch (pled->ledpin) {
+ case LED_PIN_GPIO0:
+ break;
+ case LED_PIN_LED0:
+ rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0xf0);
+ break;
+ case LED_PIN_LED1:
+ rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ pled->ledon = true;
+}
+
+void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ u8 ledcfg;
+
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+ ("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin));
+
+ ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
+
+ switch (pled->ledpin) {
+ case LED_PIN_GPIO0:
+ break;
+ case LED_PIN_LED0:
+ ledcfg &= 0xf0;
+ if (pcipriv->ledctl.led_opendrain == true)
+ rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(1)));
+ else
+ rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
+ break;
+ case LED_PIN_LED1:
+ ledcfg &= 0x0f;
+ rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ pled->ledon = false;
+}
+
+static void _rtl92se_sw_led_control(struct ieee80211_hw *hw,
+ enum led_ctl_mode ledaction)
+{
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+ switch (ledaction) {
+ case LED_CTL_POWER_ON:
+ case LED_CTL_LINK:
+ case LED_CTL_NO_LINK:
+ rtl92se_sw_led_on(hw, pLed0);
+ break;
+ case LED_CTL_POWER_OFF:
+ rtl92se_sw_led_off(hw, pLed0);
+ break;
+ default:
+ break;
+ }
+}
+
+void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
+ (ledaction == LED_CTL_TX ||
+ ledaction == LED_CTL_RX ||
+ ledaction == LED_CTL_SITE_SURVEY ||
+ ledaction == LED_CTL_LINK ||
+ ledaction == LED_CTL_NO_LINK ||
+ ledaction == LED_CTL_START_TO_LINK ||
+ ledaction == LED_CTL_POWER_ON)) {
+ return;
+ }
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n",
+ ledaction));
+
+ _rtl92se_sw_led_control(hw, ledaction);
+}
+
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.h b/drivers/net/wireless/rtlwifi/rtl8192se/led.h
similarity index 62%
copy from drivers/net/wireless/iwlwifi/iwl-agn-led.h
copy to drivers/net/wireless/rtlwifi/rtl8192se/led.h
index 96f323d..8cce387 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-led.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/led.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2009-2010 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -19,15 +19,19 @@
* file called LICENSE.
*
* Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
+#ifndef __REALTEK_PCI92SE_LED_H__
+#define __REALTEK_PCI92SE_LED_H__
-#ifndef __iwl_agn_led_h__
-#define __iwl_agn_led_h__
+void rtl92se_init_sw_leds(struct ieee80211_hw *hw);
+void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);
-extern const struct iwl_led_ops iwlagn_led_ops;
-void iwlagn_led_enable(struct iwl_priv *priv);
-
-#endif /* __iwl_agn_led_h__ */
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
new file mode 100644
index 0000000..63b45e6
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -0,0 +1,1740 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "table.h"
+
+static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask)
+{
+ u32 i;
+
+ for (i = 0; i <= 31; i++) {
+ if (((bitmask >> i) & 0x1) == 1)
+ break;
+ }
+
+ return i;
+}
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 returnvalue = 0, originalvalue, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)\n",
+ regaddr, bitmask));
+
+ originalvalue = rtl_read_dword(rtlpriv, regaddr);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ returnvalue = (originalvalue & bitmask) >> bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ ("BBR MASK=0x%x Addr[0x%x]=0x%x\n",
+ bitmask, regaddr, originalvalue));
+
+ return returnvalue;
+
+}
+
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 originalvalue, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+ " data(%#x)\n", regaddr, bitmask, data));
+
+ if (bitmask != MASKDWORD) {
+ originalvalue = rtl_read_dword(rtlpriv, regaddr);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ data = ((originalvalue & (~bitmask)) | (data << bitshift));
+ }
+
+ rtl_write_dword(rtlpriv, regaddr, data);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+ " data(%#x)\n", regaddr, bitmask, data));
+
+}
+
+static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset)
+{
+
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+ u32 newoffset;
+ u32 tmplong, tmplong2;
+ u8 rfpi_enable = 0;
+ u32 retvalue = 0;
+
+ offset &= 0x3f;
+ newoffset = offset;
+
+ tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+
+ if (rfpath == RF90_PATH_A)
+ tmplong2 = tmplong;
+ else
+ tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+
+ tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) |
+ BLSSI_READEDGE;
+
+ rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+ tmplong & (~BLSSI_READEDGE));
+
+ mdelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+ mdelay(1);
+
+ rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong |
+ BLSSI_READEDGE);
+ mdelay(1);
+
+ if (rfpath == RF90_PATH_A)
+ rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+ BIT(8));
+ else if (rfpath == RF90_PATH_B)
+ rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+ BIT(8));
+
+ if (rfpi_enable)
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi,
+ BLSSI_READBACK_DATA);
+ else
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+ BLSSI_READBACK_DATA);
+
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+ BLSSI_READBACK_DATA);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n",
+ rfpath, pphyreg->rflssi_readback, retvalue));
+
+ return retvalue;
+
+}
+
+static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset,
+ u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+ u32 data_and_addr = 0;
+ u32 newoffset;
+
+ offset &= 0x3f;
+ newoffset = offset;
+
+ data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+ rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n",
+ rfpath, pphyreg->rf3wire_offset, data_and_addr));
+}
+
+
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 original_value, readback_value, bitshift;
+ unsigned long flags;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+ "bitmask(%#x)\n", regaddr, rfpath, bitmask));
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+ original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr);
+
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ readback_value = (original_value & bitmask) >> bitshift;
+
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+ "bitmask(%#x), original_value(%#x)\n", regaddr, rfpath,
+ bitmask, original_value));
+
+ return readback_value;
+}
+
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 original_value, bitshift;
+ unsigned long flags;
+
+ if (!((rtlphy->rf_pathmap >> rfpath) & 0x1))
+ return;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+ " data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+ if (bitmask != RFREG_OFFSET_MASK) {
+ original_value = _rtl92s_phy_rf_serial_read(hw, rfpath,
+ regaddr);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ data = ((original_value & (~bitmask)) | (data << bitshift));
+ }
+
+ _rtl92s_phy_rf_serial_write(hw, rfpath, regaddr, data);
+
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x), "
+ "data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+
+}
+
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
+ u8 operation)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ if (!is_hal_stop(rtlhal)) {
+ switch (operation) {
+ case SCAN_OPT_BACKUP:
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN);
+ break;
+ case SCAN_OPT_RESTORE:
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Unknown operation.\n"));
+ break;
+ }
+ }
+}
+
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u8 reg_bw_opmode;
+ u8 reg_prsr_rsc;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("Switch to %s bandwidth\n",
+ rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+ "20MHz" : "40MHz"));
+
+ if (rtlphy->set_bwmode_inprogress)
+ return;
+ if (is_hal_stop(rtlhal))
+ return;
+
+ rtlphy->set_bwmode_inprogress = true;
+
+ reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE);
+ reg_prsr_rsc = rtl_read_byte(rtlpriv, RRSR + 2);
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ reg_bw_opmode |= BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw));
+ break;
+ }
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+
+ if (rtlhal->version >= VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+
+ rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+ (mac->cur_40_prime_sc >> 1));
+ rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+
+ if (rtlhal->version >= VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+ break;
+ }
+
+ rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+ rtlphy->set_bwmode_inprogress = false;
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
+static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+ u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid,
+ u32 para1, u32 para2, u32 msdelay)
+{
+ struct swchnlcmd *pcmd;
+
+ if (cmdtable == NULL) {
+ RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
+ return false;
+ }
+
+ if (cmdtableidx >= cmdtablesz)
+ return false;
+
+ pcmd = cmdtable + cmdtableidx;
+ pcmd->cmdid = cmdid;
+ pcmd->para1 = para1;
+ pcmd->para2 = para2;
+ pcmd->msdelay = msdelay;
+
+ return true;
+}
+
+static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+ u8 channel, u8 *stage, u8 *step, u32 *delay)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+ u32 precommoncmdcnt;
+ struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+ u32 postcommoncmdcnt;
+ struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+ u32 rfdependcmdcnt;
+ struct swchnlcmd *currentcmd = NULL;
+ u8 rfpath;
+ u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+ precommoncmdcnt = 0;
+ _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+ MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0);
+ _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+ MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+
+ postcommoncmdcnt = 0;
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+ MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+
+ rfdependcmdcnt = 0;
+
+ RT_ASSERT((channel >= 1 && channel <= 14),
+ ("illegal channel for Zebra: %d\n", channel));
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+ MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
+ RF_CHNLBW, channel, 10);
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+ MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
+
+ do {
+ switch (*stage) {
+ case 0:
+ currentcmd = &precommoncmd[*step];
+ break;
+ case 1:
+ currentcmd = &rfdependcmd[*step];
+ break;
+ case 2:
+ currentcmd = &postcommoncmd[*step];
+ break;
+ }
+
+ if (currentcmd->cmdid == CMDID_END) {
+ if ((*stage) == 2) {
+ return true;
+ } else {
+ (*stage)++;
+ (*step) = 0;
+ continue;
+ }
+ }
+
+ switch (currentcmd->cmdid) {
+ case CMDID_SET_TXPOWEROWER_LEVEL:
+ rtl92s_phy_set_txpower(hw, channel);
+ break;
+ case CMDID_WRITEPORT_ULONG:
+ rtl_write_dword(rtlpriv, currentcmd->para1,
+ currentcmd->para2);
+ break;
+ case CMDID_WRITEPORT_USHORT:
+ rtl_write_word(rtlpriv, currentcmd->para1,
+ (u16)currentcmd->para2);
+ break;
+ case CMDID_WRITEPORT_UCHAR:
+ rtl_write_byte(rtlpriv, currentcmd->para1,
+ (u8)currentcmd->para2);
+ break;
+ case CMDID_RF_WRITEREG:
+ for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+ rtlphy->rfreg_chnlval[rfpath] =
+ ((rtlphy->rfreg_chnlval[rfpath] &
+ 0xfffffc00) | currentcmd->para2);
+ rtl_set_rfreg(hw, (enum radio_path)rfpath,
+ currentcmd->para1,
+ RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[rfpath]);
+ }
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+
+ break;
+ } while (true);
+
+ (*delay) = currentcmd->msdelay;
+ (*step)++;
+ return false;
+}
+
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 delay;
+ bool ret;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+ ("switch to channel%d\n",
+ rtlphy->current_channel));
+
+ if (rtlphy->sw_chnl_inprogress)
+ return 0;
+
+ if (rtlphy->set_bwmode_inprogress)
+ return 0;
+
+ if (is_hal_stop(rtlhal))
+ return 0;
+
+ rtlphy->sw_chnl_inprogress = true;
+ rtlphy->sw_chnl_stage = 0;
+ rtlphy->sw_chnl_step = 0;
+
+ do {
+ if (!rtlphy->sw_chnl_inprogress)
+ break;
+
+ ret = _rtl92s_phy_sw_chnl_step_by_step(hw,
+ rtlphy->current_channel,
+ &rtlphy->sw_chnl_stage,
+ &rtlphy->sw_chnl_step, &delay);
+ if (!ret) {
+ if (delay > 0)
+ mdelay(delay);
+ else
+ continue;
+ } else {
+ rtlphy->sw_chnl_inprogress = false;
+ }
+ break;
+ } while (true);
+
+ rtlphy->sw_chnl_inprogress = false;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+
+ return 1;
+}
+
+static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1btmp;
+
+ u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ u1btmp |= BIT(0);
+
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+ rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ udelay(100);
+
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+
+ /* we should chnge GPIO to input mode
+ * this will drop away current about 25mA*/
+ rtl8192se_gpiobit3_cfg_inputmode(hw);
+}
+
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpwr_state)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ bool bresult = true;
+ u8 i, queue_id;
+ struct rtl8192_tx_ring *ring = NULL;
+
+ if (rfpwr_state == ppsc->rfpwr_state)
+ return false;
+
+ ppsc->set_rfpowerstate_inprogress = true;
+
+ switch (rfpwr_state) {
+ case ERFON:{
+ if ((ppsc->rfpwr_state == ERFOFF) &&
+ RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+
+ bool rtstatus;
+ u32 InitializeCount = 0;
+ do {
+ InitializeCount++;
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("IPS Set eRf nic enable\n"));
+ rtstatus = rtl_ps_enable_nic(hw);
+ } while ((rtstatus != true) &&
+ (InitializeCount < 10));
+
+ RT_CLEAR_PS_LEVEL(ppsc,
+ RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("awake, sleeped:%d ms "
+ "state_inap:%x\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->last_sleep_jiffies),
+ rtlpriv->psc.state_inap));
+ ppsc->last_awake_jiffies = jiffies;
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0x00);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x3);
+ }
+
+ if (mac->link_state == MAC80211_LINKED)
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_LINK);
+ else
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_NO_LINK);
+ break;
+ }
+ case ERFOFF:{
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("IPS Set eRf nic disable\n"));
+ rtl_ps_disable_nic(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_NO_LINK);
+ else
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_POWER_OFF);
+ }
+ break;
+ }
+ case ERFSLEEP:
+ if (ppsc->rfpwr_state == ERFOFF)
+ break;
+
+ for (queue_id = 0, i = 0;
+ queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+ ring = &pcipriv->dev.tx_ring[queue_id];
+ if (skb_queue_len(&ring->queue) == 0 ||
+ queue_id == BEACON_QUEUE) {
+ queue_id++;
+ continue;
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("eRf Off/Sleep: "
+ "%d times TcbBusyQueue[%d] = "
+ "%d before doze!\n",
+ (i + 1), queue_id,
+ skb_queue_len(&ring->queue)));
+
+ udelay(10);
+ i++;
+ }
+
+ if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("\nERFOFF: %d times"
+ "TcbBusyQueue[%d] = %d !\n",
+ MAX_DOZE_WAITING_TIMES_9x,
+ queue_id,
+ skb_queue_len(&ring->queue)));
+ break;
+ }
+ }
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("Set ERFSLEEP awaked:%d ms\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->last_awake_jiffies)));
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("sleep awaked:%d ms "
+ "state_inap:%x\n", jiffies_to_msecs(jiffies -
+ ppsc->last_awake_jiffies),
+ rtlpriv->psc.state_inap));
+ ppsc->last_sleep_jiffies = jiffies;
+ _rtl92se_phy_set_rf_sleep(hw);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ bresult = false;
+ break;
+ }
+
+ if (bresult)
+ ppsc->rfpwr_state = rfpwr_state;
+
+ ppsc->set_rfpowerstate_inprogress = false;
+
+ return bresult;
+}
+
+static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw,
+ enum radio_path rfpath)
+{
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ bool rtstatus = true;
+ u32 tmpval = 0;
+
+ /* If inferiority IC, we have to increase the PA bias current */
+ if (rtlhal->ic_class != IC_INFERIORITY_A) {
+ tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf);
+ rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1);
+ }
+
+ return rtstatus;
+}
+
+static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw,
+ u32 reg_addr, u32 bitmask, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ if (reg_addr == RTXAGC_RATE18_06)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] =
+ data;
+ if (reg_addr == RTXAGC_RATE54_24)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] =
+ data;
+ if (reg_addr == RTXAGC_CCK_MCS32)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] =
+ data;
+ if (reg_addr == RTXAGC_MCS03_MCS00)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] =
+ data;
+ if (reg_addr == RTXAGC_MCS07_MCS04)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] =
+ data;
+ if (reg_addr == RTXAGC_MCS11_MCS08)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] =
+ data;
+ if (reg_addr == RTXAGC_MCS15_MCS12) {
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] =
+ data;
+ rtlphy->pwrgroup_cnt++;
+ }
+}
+
+static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /*RF Interface Sowrtware Control */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+ /* RF Interface Readback Value */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+ /* RF Interface Output (and Enable) */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE;
+
+ /* RF Interface (Output and) Enable */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
+
+ /* Addr of LSSI. Wirte RF register by driver */
+ rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+ RFPGA0_XA_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+ RFPGA0_XB_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset =
+ RFPGA0_XC_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset =
+ RFPGA0_XD_LSSIPARAMETER;
+
+ /* RF parameter */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+
+ /* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+ rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+ /* Tranceiver A~D HSSI Parameter-1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
+
+ /* Tranceiver A~D HSSI Parameter-2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 = RFPGA0_XD_HSSIPARAMETER2;
+
+ /* RF switch Control */
+ rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control =
+ RFPGA0_XAB_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control =
+ RFPGA0_XAB_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control =
+ RFPGA0_XCD_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control =
+ RFPGA0_XCD_SWITCHCONTROL;
+
+ /* AGC control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+ /* AGC control 2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+ /* RX AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance =
+ ROFDM0_XARXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance =
+ ROFDM0_XBRXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance =
+ ROFDM0_XCRXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance =
+ ROFDM0_XDRXIQIMBALANCE;
+
+ /* RX AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+ /* Tx AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance =
+ ROFDM0_XATXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance =
+ ROFDM0_XBTXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance =
+ ROFDM0_XCTXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance =
+ ROFDM0_XDTXIQIMBALANCE;
+
+ /* Tx AFE control 2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+ /* Tranceiver LSSI Readback */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback =
+ RFPGA0_XA_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback =
+ RFPGA0_XB_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback =
+ RFPGA0_XC_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback =
+ RFPGA0_XD_LSSIREADBACK;
+
+ /* Tranceiver LSSI Readback PI mode */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi =
+ TRANSCEIVERA_HSPI_READBACK;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi =
+ TRANSCEIVERB_HSPI_READBACK;
+}
+
+
+static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype)
+{
+ int i;
+ u32 *phy_reg_table;
+ u32 *agc_table;
+ u16 phy_reg_len, agc_len;
+
+ agc_len = AGCTAB_ARRAYLENGTH;
+ agc_table = rtl8192seagctab_array;
+ /* Default RF_type: 2T2R */
+ phy_reg_len = PHY_REG_2T2RARRAYLENGTH;
+ phy_reg_table = rtl8192sephy_reg_2t2rarray;
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_reg_len; i = i + 2) {
+ if (phy_reg_table[i] == 0xfe)
+ mdelay(50);
+ else if (phy_reg_table[i] == 0xfd)
+ mdelay(5);
+ else if (phy_reg_table[i] == 0xfc)
+ mdelay(1);
+ else if (phy_reg_table[i] == 0xfb)
+ udelay(50);
+ else if (phy_reg_table[i] == 0xfa)
+ udelay(5);
+ else if (phy_reg_table[i] == 0xf9)
+ udelay(1);
+
+ /* Add delay for ECS T20 & LG malow platform, */
+ udelay(1);
+
+ rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD,
+ phy_reg_table[i + 1]);
+ }
+ } else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+ for (i = 0; i < agc_len; i = i + 2) {
+ rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD,
+ agc_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+ }
+
+ return true;
+}
+
+static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw,
+ u8 configtype)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 *phy_regarray2xtxr_table;
+ u16 phy_regarray2xtxr_len;
+ int i;
+
+ if (rtlphy->rf_type == RF_1T1R) {
+ phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray;
+ phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH;
+ } else if (rtlphy->rf_type == RF_1T2R) {
+ phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray;
+ phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH;
+ } else {
+ return false;
+ }
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) {
+ if (phy_regarray2xtxr_table[i] == 0xfe)
+ mdelay(50);
+ else if (phy_regarray2xtxr_table[i] == 0xfd)
+ mdelay(5);
+ else if (phy_regarray2xtxr_table[i] == 0xfc)
+ mdelay(1);
+ else if (phy_regarray2xtxr_table[i] == 0xfb)
+ udelay(50);
+ else if (phy_regarray2xtxr_table[i] == 0xfa)
+ udelay(5);
+ else if (phy_regarray2xtxr_table[i] == 0xf9)
+ udelay(1);
+
+ rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i],
+ phy_regarray2xtxr_table[i + 1],
+ phy_regarray2xtxr_table[i + 2]);
+ }
+ }
+
+ return true;
+}
+
+static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw,
+ u8 configtype)
+{
+ int i;
+ u32 *phy_table_pg;
+ u16 phy_pg_len;
+
+ phy_pg_len = PHY_REG_ARRAY_PGLENGTH;
+ phy_table_pg = rtl8192sephy_reg_array_pg;
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_pg_len; i = i + 3) {
+ if (phy_table_pg[i] == 0xfe)
+ mdelay(50);
+ else if (phy_table_pg[i] == 0xfd)
+ mdelay(5);
+ else if (phy_table_pg[i] == 0xfc)
+ mdelay(1);
+ else if (phy_table_pg[i] == 0xfb)
+ udelay(50);
+ else if (phy_table_pg[i] == 0xfa)
+ udelay(5);
+ else if (phy_table_pg[i] == 0xf9)
+ udelay(1);
+
+ _rtl92s_store_pwrindex_diffrate_offset(hw,
+ phy_table_pg[i],
+ phy_table_pg[i + 1],
+ phy_table_pg[i + 2]);
+ rtl92s_phy_set_bb_reg(hw, phy_table_pg[i],
+ phy_table_pg[i + 1],
+ phy_table_pg[i + 2]);
+ }
+ }
+
+ return true;
+}
+
+static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ bool rtstatus = true;
+
+ /* 1. Read PHY_REG.TXT BB INIT!! */
+ /* We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R */
+ if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R ||
+ rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) {
+ rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG);
+
+ if (rtlphy->rf_type != RF_2T2R &&
+ rtlphy->rf_type != RF_2T2R_GREEN)
+ /* so we should reconfig BB reg with the right
+ * PHY parameters. */
+ rtstatus = _rtl92s_phy_set_bb_to_diff_rf(hw,
+ BASEBAND_CONFIG_PHY_REG);
+ } else {
+ rtstatus = false;
+ }
+
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("Write BB Reg Fail!!"));
+ goto phy_BB8190_Config_ParaFile_Fail;
+ }
+
+ /* 2. If EEPROM or EFUSE autoload OK, We must config by
+ * PHY_REG_PG.txt */
+ if (rtlefuse->autoload_failflag == false) {
+ rtlphy->pwrgroup_cnt = 0;
+
+ rtstatus = _rtl92s_phy_config_bb_with_pg(hw,
+ BASEBAND_CONFIG_PHY_REG);
+ }
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("_rtl92s_phy_bb_config_parafile(): "
+ "BB_PG Reg Fail!!"));
+ goto phy_BB8190_Config_ParaFile_Fail;
+ }
+
+ /* 3. BB AGC table Initialization */
+ rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
+
+ if (rtstatus != true) {
+ printk(KERN_ERR "_rtl92s_phy_bb_config_parafile(): "
+ "AGC Table Fail\n");
+ goto phy_BB8190_Config_ParaFile_Fail;
+ }
+
+ /* Check if the CCK HighPower is turned ON. */
+ /* This is used to calculate PWDB. */
+ rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw,
+ RFPGA0_XA_HSSIPARAMETER2, 0x200));
+
+phy_BB8190_Config_ParaFile_Fail:
+ return rtstatus;
+}
+
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ int i;
+ bool rtstatus = true;
+ u32 *radio_a_table;
+ u32 *radio_b_table;
+ u16 radio_a_tblen, radio_b_tblen;
+
+ radio_a_tblen = RADIOA_1T_ARRAYLENGTH;
+ radio_a_table = rtl8192seradioa_1t_array;
+
+ /* Using Green mode array table for RF_2T2R_GREEN */
+ if (rtlphy->rf_type == RF_2T2R_GREEN) {
+ radio_b_table = rtl8192seradiob_gm_array;
+ radio_b_tblen = RADIOB_GM_ARRAYLENGTH;
+ } else {
+ radio_b_table = rtl8192seradiob_array;
+ radio_b_tblen = RADIOB_ARRAYLENGTH;
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Radio No %x\n", rfpath));
+ rtstatus = true;
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ for (i = 0; i < radio_a_tblen; i = i + 2) {
+ if (radio_a_table[i] == 0xfe)
+ /* Delay specific ms. Only RF configuration
+ * requires delay. */
+ mdelay(50);
+ else if (radio_a_table[i] == 0xfd)
+ mdelay(5);
+ else if (radio_a_table[i] == 0xfc)
+ mdelay(1);
+ else if (radio_a_table[i] == 0xfb)
+ udelay(50);
+ else if (radio_a_table[i] == 0xfa)
+ udelay(5);
+ else if (radio_a_table[i] == 0xf9)
+ udelay(1);
+ else
+ rtl92s_phy_set_rf_reg(hw, rfpath,
+ radio_a_table[i],
+ MASK20BITS,
+ radio_a_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+
+ /* PA Bias current for inferiority IC */
+ _rtl92s_phy_config_rfpa_bias_current(hw, rfpath);
+ break;
+ case RF90_PATH_B:
+ for (i = 0; i < radio_b_tblen; i = i + 2) {
+ if (radio_b_table[i] == 0xfe)
+ /* Delay specific ms. Only RF configuration
+ * requires delay.*/
+ mdelay(50);
+ else if (radio_b_table[i] == 0xfd)
+ mdelay(5);
+ else if (radio_b_table[i] == 0xfc)
+ mdelay(1);
+ else if (radio_b_table[i] == 0xfb)
+ udelay(50);
+ else if (radio_b_table[i] == 0xfa)
+ udelay(5);
+ else if (radio_b_table[i] == 0xf9)
+ udelay(1);
+ else
+ rtl92s_phy_set_rf_reg(hw, rfpath,
+ radio_b_table[i],
+ MASK20BITS,
+ radio_b_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+ break;
+ case RF90_PATH_C:
+ ;
+ break;
+ case RF90_PATH_D:
+ ;
+ break;
+ default:
+ break;
+ }
+
+ return rtstatus;
+}
+
+
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 i;
+ u32 arraylength;
+ u32 *ptraArray;
+
+ arraylength = MAC_2T_ARRAYLENGTH;
+ ptraArray = rtl8192semac_2t_array;
+
+ for (i = 0; i < arraylength; i = i + 2)
+ rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]);
+
+ return true;
+}
+
+
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ bool rtstatus = true;
+ u8 pathmap, index, rf_num = 0;
+ u8 path1, path2;
+
+ _rtl92s_phy_init_register_definition(hw);
+
+ /* Config BB and AGC */
+ rtstatus = _rtl92s_phy_bb_config_parafile(hw);
+
+
+ /* Check BB/RF confiuration setting. */
+ /* We only need to configure RF which is turned on. */
+ path1 = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf));
+ mdelay(10);
+ path2 = (u8)(rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE, 0xf));
+ pathmap = path1 | path2;
+
+ rtlphy->rf_pathmap = pathmap;
+ for (index = 0; index < 4; index++) {
+ if ((pathmap >> index) & 0x1)
+ rf_num++;
+ }
+
+ if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) ||
+ (rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
+ (rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
+ (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("RF_Type(%x) does not match "
+ "RF_Num(%x)!!\n", rtlphy->rf_type, rf_num));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("path1 0x%x, path2 0x%x, pathmap "
+ "0x%x\n", path1, path2, pathmap));
+ }
+
+ return rtstatus;
+}
+
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* Initialize general global value */
+ if (rtlphy->rf_type == RF_1T1R)
+ rtlphy->num_total_rfpath = 1;
+ else
+ rtlphy->num_total_rfpath = 2;
+
+ /* Config BB and RF */
+ return rtl92s_phy_rf6052_config(hw);
+}
+
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* read rx initial gain */
+ rtlphy->default_initialgain[0] = rtl_get_bbreg(hw,
+ ROFDM0_XAAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[1] = rtl_get_bbreg(hw,
+ ROFDM0_XBAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[2] = rtl_get_bbreg(hw,
+ ROFDM0_XCAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[3] = rtl_get_bbreg(hw,
+ ROFDM0_XDAGCCORE1, MASKBYTE0);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Default initial gain "
+ "(c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n",
+ rtlphy->default_initialgain[0],
+ rtlphy->default_initialgain[1],
+ rtlphy->default_initialgain[2],
+ rtlphy->default_initialgain[3]));
+
+ /* read framesync */
+ rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3, MASKBYTE0);
+ rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
+ MASKDWORD);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Default framesync (0x%x) = 0x%x\n",
+ ROFDM0_RXDETECTOR3, rtlphy->framesync));
+
+}
+
+static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
+ u8 *cckpowerlevel, u8 *ofdmpowerLevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 index = (channel - 1);
+
+ /* 1. CCK */
+ /* RF-A */
+ cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index];
+ /* RF-B */
+ cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index];
+
+ /* 2. OFDM for 1T or 2T */
+ if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) {
+ /* Read HT 40 OFDM TX power */
+ ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index];
+ ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index];
+ } else if (rtlphy->rf_type == RF_2T2R) {
+ /* Read HT 40 OFDM TX power */
+ ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index];
+ ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index];
+ }
+}
+
+static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw,
+ u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
+ rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+}
+
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ /* [0]:RF-A, [1]:RF-B */
+ u8 cckpowerlevel[2], ofdmpowerLevel[2];
+
+ if (rtlefuse->txpwr_fromeprom == false)
+ return;
+
+ /* Mainly we use RF-A Tx Power to write the Tx Power registers,
+ * but the RF-B Tx Power must be calculated by the antenna diff.
+ * So we have to rewrite Antenna gain offset register here.
+ * Please refer to BB register 0x80c
+ * 1. For CCK.
+ * 2. For OFDM 1T or 2T */
+ _rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0],
+ &ofdmpowerLevel[0]);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Channel-%d, cckPowerLevel (A / B) = "
+ "0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n",
+ channel, cckpowerlevel[0], cckpowerlevel[1],
+ ofdmpowerLevel[0], ofdmpowerLevel[1]));
+
+ _rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0],
+ &ofdmpowerLevel[0]);
+
+ rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]);
+ rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel);
+
+}
+
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 pollingcnt = 10000;
+ u32 tmpvalue;
+
+ /* Make sure that CMD IO has be accepted by FW. */
+ do {
+ udelay(10);
+
+ tmpvalue = rtl_read_dword(rtlpriv, WFM5);
+ if (tmpvalue == 0)
+ break;
+ } while (--pollingcnt);
+
+ if (pollingcnt == 0)
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Set FW Cmd fail!!\n"));
+}
+
+
+static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 input, current_aid = 0;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ /* We re-map RA related CMD IO to combinational ones */
+ /* if FW version is v.52 or later. */
+ switch (rtlhal->current_fwcmd_io) {
+ case FW_CMD_RA_REFRESH_N:
+ rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB;
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB;
+ break;
+ default:
+ break;
+ }
+
+ switch (rtlhal->current_fwcmd_io) {
+ case FW_CMD_RA_RESET:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_RESET\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_ACTIVE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_ACTIVE\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_N:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_N\n"));
+ input = FW_RA_REFRESH;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_BG\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_N_COMB:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_N_COMB\n"));
+ input = FW_RA_IOT_N_COMB;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_BG_COMB:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_BG_COMB\n"));
+ input = FW_RA_IOT_BG_COMB;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_IQK_ENABLE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_IQK_ENABLE\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_PAUSE_DM_BY_SCAN:
+ /* Lower initial gain */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+ break;
+ case FW_CMD_RESUME_DM_BY_SCAN:
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+ break;
+ case FW_CMD_HIGH_PWR_DISABLE:
+ if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE)
+ break;
+
+ /* Lower initial gain */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+ break;
+ case FW_CMD_HIGH_PWR_ENABLE:
+ if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+ (rtlpriv->dm.dynamic_txpower_enable == true))
+ break;
+
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+ break;
+ case FW_CMD_LPS_ENTER:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_LPS_ENTER\n"));
+ current_aid = rtlpriv->mac80211.assoc_id;
+ rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER |
+ ((current_aid | 0xc000) << 8)));
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ /* FW set TXOP disable here, so disable EDCA
+ * turbo mode until driver leave LPS */
+ break;
+ case FW_CMD_LPS_LEAVE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_LPS_LEAVE\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_ADD_A2_ENTRY:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_ADD_A2_ENTRY\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_CTRL_DM_BY_DRIVER:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("FW_CMD_CTRL_DM_BY_DRIVER\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+
+ default:
+ break;
+ }
+
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+
+ /* Clear FW CMD operation flag. */
+ rtlhal->set_fwcmd_inprogress = false;
+}
+
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv);
+ u16 fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv);
+ bool bPostProcessing = false;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n",
+ fw_cmdio, rtlhal->set_fwcmd_inprogress));
+
+ do {
+ /* We re-map to combined FW CMD ones if firmware version */
+ /* is v.53 or later. */
+ switch (fw_cmdio) {
+ case FW_CMD_RA_REFRESH_N:
+ fw_cmdio = FW_CMD_RA_REFRESH_N_COMB;
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB;
+ break;
+ default:
+ break;
+ }
+
+ /* If firmware version is v.62 or later,
+ * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */
+ if (hal_get_firmwareversion(rtlpriv) >= 0x3E) {
+ if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER)
+ fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW;
+ }
+
+
+ /* We shall revise all FW Cmd IO into Reg0x364
+ * DM map table in the future. */
+ switch (fw_cmdio) {
+ case FW_CMD_RA_INIT:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("RA init!!\n"));
+ fw_cmdmap |= FW_RA_INIT_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL);
+ break;
+ case FW_CMD_DIG_DISABLE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set DIG disable!!\n"));
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_DIG_ENABLE:
+ case FW_CMD_DIG_RESUME:
+ if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) {
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set DIG enable or resume!!\n"));
+ fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ }
+ break;
+ case FW_CMD_DIG_HALT:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set DIG halt!!\n"));
+ fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_TXPWR_TRACK_THERMAL: {
+ u8 thermalval = 0;
+ fw_cmdmap |= FW_PWR_TRK_CTL;
+
+ /* Clear FW parameter in terms of thermal parts. */
+ fw_param &= FW_PWR_TRK_PARAM_CLR;
+
+ thermalval = rtlpriv->dm.thermalvalue;
+ fw_param |= ((thermalval << 24) |
+ (rtlefuse->thermalmeter[0] << 16));
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set TxPwr tracking!! "
+ "FwCmdMap(%#x), FwParam(%#x)\n",
+ fw_cmdmap, fw_param));
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL);
+ }
+ break;
+ /* The following FW CMDs are only compatible to
+ * v.53 or later. */
+ case FW_CMD_RA_REFRESH_N_COMB:
+ fw_cmdmap |= FW_RA_N_CTL;
+
+ /* Clear RA BG mode control. */
+ fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL);
+
+ /* Clear FW parameter in terms of RA parts. */
+ fw_param &= FW_RA_PARAM_CLR;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("[FW CMD] [New Version] "
+ "Set RA/IOT Comb in n mode!! FwCmdMap(%#x), "
+ "FwParam(%#x)\n", fw_cmdmap, fw_param));
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL);
+ break;
+ case FW_CMD_RA_REFRESH_BG_COMB:
+ fw_cmdmap |= FW_RA_BG_CTL;
+
+ /* Clear RA n-mode control. */
+ fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL);
+ /* Clear FW parameter in terms of RA parts. */
+ fw_param &= FW_RA_PARAM_CLR;
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL);
+ break;
+ case FW_CMD_IQK_ENABLE:
+ fw_cmdmap |= FW_IQK_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL);
+ break;
+ /* The following FW CMD is compatible to v.62 or later. */
+ case FW_CMD_CTRL_DM_BY_DRIVER_NEW:
+ fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ /* The followed FW Cmds needs post-processing later. */
+ case FW_CMD_RESUME_DM_BY_SCAN:
+ fw_cmdmap |= (FW_DIG_ENABLE_CTL |
+ FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+
+ if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE ||
+ !digtable.dig_enable_flag)
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+ if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+ (rtlpriv->dm.dynamic_txpower_enable == true))
+ fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+
+ if ((digtable.dig_ext_port_stage ==
+ DIG_EXT_PORT_STAGE_0) ||
+ (digtable.dig_ext_port_stage ==
+ DIG_EXT_PORT_STAGE_1))
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_PAUSE_DM_BY_SCAN:
+ fw_cmdmap &= ~(FW_DIG_ENABLE_CTL |
+ FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_HIGH_PWR_DISABLE:
+ fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_HIGH_PWR_ENABLE:
+ if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
+ (rtlpriv->dm.dynamic_txpower_enable != true)) {
+ fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ }
+ break;
+ case FW_CMD_DIG_MODE_FA:
+ fw_cmdmap |= FW_FA_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_DIG_MODE_SS:
+ fw_cmdmap &= ~FW_FA_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_PAPE_CONTROL:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("[FW CMD] Set PAPE Control\n"));
+ fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW;
+
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ default:
+ /* Pass to original FW CMD processing callback
+ * routine. */
+ bPostProcessing = true;
+ break;
+ }
+ } while (false);
+
+ /* We shall post processing these FW CMD if
+ * variable bPostProcessing is set. */
+ if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) {
+ rtlhal->set_fwcmd_inprogress = true;
+ /* Update current FW Cmd for callback use. */
+ rtlhal->current_fwcmd_io = fw_cmdio;
+ } else {
+ return false;
+ }
+
+ _rtl92s_phy_set_fwcmd_io(hw);
+ return true;
+}
+
+static void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 delay = 100;
+ u8 regu1;
+
+ regu1 = rtl_read_byte(rtlpriv, 0x554);
+ while ((regu1 & BIT(5)) && (delay > 0)) {
+ regu1 = rtl_read_byte(rtlpriv, 0x554);
+ delay--;
+ /* We delay only 50us to prevent
+ * being scheduled out. */
+ udelay(50);
+ }
+}
+
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ /* The way to be capable to switch clock request
+ * when the PG setting does not support clock request.
+ * This is the backdoor solution to switch clock
+ * request before ASPM or D3. */
+ rtl_write_dword(rtlpriv, 0x540, 0x73c11);
+ rtl_write_dword(rtlpriv, 0x548, 0x2407c);
+
+ /* Switch EPHY parameter!!!! */
+ rtl_write_word(rtlpriv, 0x550, 0x1000);
+ rtl_write_byte(rtlpriv, 0x554, 0x20);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ rtl_write_word(rtlpriv, 0x550, 0xa0eb);
+ rtl_write_byte(rtlpriv, 0x554, 0x3e);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ rtl_write_word(rtlpriv, 0x550, 0xff80);
+ rtl_write_byte(rtlpriv, 0x554, 0x39);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ /* Delay L1 enter time */
+ if (ppsc->support_aspm && !ppsc->support_backdoor)
+ rtl_write_byte(rtlpriv, 0x560, 0x40);
+ else
+ rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+}
+
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8));
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.h b/drivers/net/wireless/rtlwifi/rtl8192se/phy.h
new file mode 100644
index 0000000..37e504a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.h
@@ -0,0 +1,101 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __RTL92S_PHY_H__
+#define __RTL92S_PHY_H__
+
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define MAX_DOZE_WAITING_TIMES_9x 64
+
+/* Channel switch:The size of
+ * command tables for switch channel */
+#define MAX_PRECMD_CNT 16
+#define MAX_RFDEPENDCMD_CNT 16
+#define MAX_POSTCMD_CNT 16
+
+#define RF90_PATH_MAX 4
+
+enum version_8192s {
+ VERSION_8192S_ACUT,
+ VERSION_8192S_BCUT,
+ VERSION_8192S_CCUT
+};
+
+enum swchnlcmd_id {
+ CMDID_END,
+ CMDID_SET_TXPOWEROWER_LEVEL,
+ CMDID_BBREGWRITE10,
+ CMDID_WRITEPORT_ULONG,
+ CMDID_WRITEPORT_USHORT,
+ CMDID_WRITEPORT_UCHAR,
+ CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+ enum swchnlcmd_id cmdid;
+ u32 para1;
+ u32 para2;
+ u32 msdelay;
+};
+
+enum baseband_config_type {
+ /* Radio Path A */
+ BASEBAND_CONFIG_PHY_REG = 0,
+ /* Radio Path B */
+ BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+#define hal_get_firmwareversion(rtlpriv) \
+ (((struct rt_firmware *)(rtlpriv->rtlhal.pfirmware))->firmwareversion)
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data);
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data);
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type);
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw);
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpower_state);
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw);
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw);
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw);
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel);
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fwcmd_io);
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw);
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 beaconinterval);
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) ;
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
new file mode 100644
index 0000000..0116ead
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h
@@ -0,0 +1,1188 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_92S_REG_H__
+#define __REALTEK_92S_REG_H__
+
+/* 1. System Configuration Registers */
+#define REG_SYS_ISO_CTRL 0x0000
+#define REG_SYS_FUNC_EN 0x0002
+#define PMC_FSM 0x0004
+#define SYS_CLKR 0x0008
+#define EPROM_CMD 0x000A
+#define EE_VPD 0x000C
+#define AFE_MISC 0x0010
+#define SPS0_CTRL 0x0011
+#define SPS1_CTRL 0x0018
+#define RF_CTRL 0x001F
+#define LDOA15_CTRL 0x0020
+#define LDOV12D_CTRL 0x0021
+#define LDOHCI12_CTRL 0x0022
+#define LDO_USB_SDIO 0x0023
+#define LPLDO_CTRL 0x0024
+#define AFE_XTAL_CTRL 0x0026
+#define AFE_PLL_CTRL 0x0028
+#define REG_EFUSE_CTRL 0x0030
+#define REG_EFUSE_TEST 0x0034
+#define PWR_DATA 0x0038
+#define DBG_PORT 0x003A
+#define DPS_TIMER 0x003C
+#define RCLK_MON 0x003E
+
+/* 2. Command Control Registers */
+#define CMDR 0x0040
+#define TXPAUSE 0x0042
+#define LBKMD_SEL 0x0043
+#define TCR 0x0044
+#define RCR 0x0048
+#define MSR 0x004C
+#define SYSF_CFG 0x004D
+#define RX_PKY_LIMIT 0x004E
+#define MBIDCTRL 0x004F
+
+/* 3. MACID Setting Registers */
+#define MACIDR 0x0050
+#define MACIDR0 0x0050
+#define MACIDR4 0x0054
+#define BSSIDR 0x0058
+#define HWVID 0x005E
+#define MAR 0x0060
+#define MBIDCAMCONTENT 0x0068
+#define MBIDCAMCFG 0x0070
+#define BUILDTIME 0x0074
+#define BUILDUSER 0x0078
+
+#define IDR0 MACIDR0
+#define IDR4 MACIDR4
+
+/* 4. Timing Control Registers */
+#define TSFR 0x0080
+#define SLOT_TIME 0x0089
+#define USTIME 0x008A
+#define SIFS_CCK 0x008C
+#define SIFS_OFDM 0x008E
+#define PIFS_TIME 0x0090
+#define ACK_TIMEOUT 0x0091
+#define EIFSTR 0x0092
+#define BCN_INTERVAL 0x0094
+#define ATIMWND 0x0096
+#define BCN_DRV_EARLY_INT 0x0098
+#define BCN_DMATIME 0x009A
+#define BCN_ERR_THRESH 0x009C
+#define MLT 0x009D
+#define RSVD_MAC_TUNE_US 0x009E
+
+/* 5. FIFO Control Registers */
+#define RQPN 0x00A0
+#define RQPN1 0x00A0
+#define RQPN2 0x00A1
+#define RQPN3 0x00A2
+#define RQPN4 0x00A3
+#define RQPN5 0x00A4
+#define RQPN6 0x00A5
+#define RQPN7 0x00A6
+#define RQPN8 0x00A7
+#define RQPN9 0x00A8
+#define RQPN10 0x00A9
+#define LD_RQPN 0x00AB
+#define RXFF_BNDY 0x00AC
+#define RXRPT_BNDY 0x00B0
+#define TXPKTBUF_PGBNDY 0x00B4
+#define PBP 0x00B5
+#define RXDRVINFO_SZ 0x00B6
+#define TXFF_STATUS 0x00B7
+#define RXFF_STATUS 0x00B8
+#define TXFF_EMPTY_TH 0x00B9
+#define SDIO_RX_BLKSZ 0x00BC
+#define RXDMA 0x00BD
+#define RXPKT_NUM 0x00BE
+#define C2HCMD_UDT_SIZE 0x00C0
+#define C2HCMD_UDT_ADDR 0x00C2
+#define FIFOPAGE1 0x00C4
+#define FIFOPAGE2 0x00C8
+#define FIFOPAGE3 0x00CC
+#define FIFOPAGE4 0x00D0
+#define FIFOPAGE5 0x00D4
+#define FW_RSVD_PG_CRTL 0x00D8
+#define RXDMA_AGG_PG_TH 0x00D9
+#define TXDESC_MSK 0x00DC
+#define TXRPTFF_RDPTR 0x00E0
+#define TXRPTFF_WTPTR 0x00E4
+#define C2HFF_RDPTR 0x00E8
+#define C2HFF_WTPTR 0x00EC
+#define RXFF0_RDPTR 0x00F0
+#define RXFF0_WTPTR 0x00F4
+#define RXFF1_RDPTR 0x00F8
+#define RXFF1_WTPTR 0x00FC
+#define RXRPT0_RDPTR 0x0100
+#define RXRPT0_WTPTR 0x0104
+#define RXRPT1_RDPTR 0x0108
+#define RXRPT1_WTPTR 0x010C
+#define RX0_UDT_SIZE 0x0110
+#define RX1PKTNUM 0x0114
+#define RXFILTERMAP 0x0116
+#define RXFILTERMAP_GP1 0x0118
+#define RXFILTERMAP_GP2 0x011A
+#define RXFILTERMAP_GP3 0x011C
+#define BCNQ_CTRL 0x0120
+#define MGTQ_CTRL 0x0124
+#define HIQ_CTRL 0x0128
+#define VOTID7_CTRL 0x012c
+#define VOTID6_CTRL 0x0130
+#define VITID5_CTRL 0x0134
+#define VITID4_CTRL 0x0138
+#define BETID3_CTRL 0x013c
+#define BETID0_CTRL 0x0140
+#define BKTID2_CTRL 0x0144
+#define BKTID1_CTRL 0x0148
+#define CMDQ_CTRL 0x014c
+#define TXPKT_NUM_CTRL 0x0150
+#define TXQ_PGADD 0x0152
+#define TXFF_PG_NUM 0x0154
+#define TRXDMA_STATUS 0x0156
+
+/* 6. Adaptive Control Registers */
+#define INIMCS_SEL 0x0160
+#define TX_RATE_REG INIMCS_SEL
+#define INIRTSMCS_SEL 0x0180
+#define RRSR 0x0181
+#define ARFR0 0x0184
+#define ARFR1 0x0188
+#define ARFR2 0x018C
+#define ARFR3 0x0190
+#define ARFR4 0x0194
+#define ARFR5 0x0198
+#define ARFR6 0x019C
+#define ARFR7 0x01A0
+#define AGGLEN_LMT_H 0x01A7
+#define AGGLEN_LMT_L 0x01A8
+#define DARFRC 0x01B0
+#define RARFRC 0x01B8
+#define MCS_TXAGC 0x01C0
+#define CCK_TXAGC 0x01C8
+
+/* 7. EDCA Setting Registers */
+#define EDCAPARA_VO 0x01D0
+#define EDCAPARA_VI 0x01D4
+#define EDCAPARA_BE 0x01D8
+#define EDCAPARA_BK 0x01DC
+#define BCNTCFG 0x01E0
+#define CWRR 0x01E2
+#define ACMAVG 0x01E4
+#define AcmHwCtrl 0x01E7
+#define VO_ADMTM 0x01E8
+#define VI_ADMTM 0x01EC
+#define BE_ADMTM 0x01F0
+#define RETRY_LIMIT 0x01F4
+#define SG_RATE 0x01F6
+
+/* 8. WMAC, BA and CCX related Register. */
+#define NAV_CTRL 0x0200
+#define BW_OPMODE 0x0203
+#define BACAMCMD 0x0204
+#define BACAMCONTENT 0x0208
+
+/* the 0x2xx register WMAC definition */
+#define LBDLY 0x0210
+#define FWDLY 0x0211
+#define HWPC_RX_CTRL 0x0218
+#define MQIR 0x0220
+#define MAIR 0x0222
+#define MSIR 0x0224
+#define CLM_RESULT 0x0227
+#define NHM_RPI_CNT 0x0228
+#define RXERR_RPT 0x0230
+#define NAV_PROT_LEN 0x0234
+#define CFEND_TH 0x0236
+#define AMPDU_MIN_SPACE 0x0237
+#define TXOP_STALL_CTRL 0x0238
+
+/* 9. Security Control Registers */
+#define REG_RWCAM 0x0240
+#define REG_WCAMI 0x0244
+#define REG_RCAMO 0x0248
+#define REG_CAMDBG 0x024C
+#define REG_SECR 0x0250
+
+/* 10. Power Save Control Registers */
+#define WOW_CTRL 0x0260
+#define PSSTATUS 0x0261
+#define PSSWITCH 0x0262
+#define MIMOPS_WAIT_PERIOD 0x0263
+#define LPNAV_CTRL 0x0264
+#define WFM0 0x0270
+#define WFM1 0x0280
+#define WFM2 0x0290
+#define WFM3 0x02A0
+#define WFM4 0x02B0
+#define WFM5 0x02C0
+#define WFCRC 0x02D0
+#define FW_RPT_REG 0x02c4
+
+/* 11. General Purpose Registers */
+#define PSTIME 0x02E0
+#define TIMER0 0x02E4
+#define TIMER1 0x02E8
+#define GPIO_CTRL 0x02EC
+#define GPIO_IN 0x02EC
+#define GPIO_OUT 0x02ED
+#define GPIO_IO_SEL 0x02EE
+#define GPIO_MOD 0x02EF
+#define GPIO_INTCTRL 0x02F0
+#define MAC_PINMUX_CFG 0x02F1
+#define LEDCFG 0x02F2
+#define PHY_REG 0x02F3
+#define PHY_REG_DATA 0x02F4
+#define REG_EFUSE_CLK 0x02F8
+
+/* 12. Host Interrupt Status Registers */
+#define INTA_MASK 0x0300
+#define ISR 0x0308
+
+/* 13. Test Mode and Debug Control Registers */
+#define DBG_PORT_SWITCH 0x003A
+#define BIST 0x0310
+#define DBS 0x0314
+#define CPUINST 0x0318
+#define CPUCAUSE 0x031C
+#define LBUS_ERR_ADDR 0x0320
+#define LBUS_ERR_CMD 0x0324
+#define LBUS_ERR_DATA_L 0x0328
+#define LBUS_ERR_DATA_H 0x032C
+#define LX_EXCEPTION_ADDR 0x0330
+#define WDG_CTRL 0x0334
+#define INTMTU 0x0338
+#define INTM 0x033A
+#define FDLOCKTURN0 0x033C
+#define FDLOCKTURN1 0x033D
+#define TRXPKTBUF_DBG_DATA 0x0340
+#define TRXPKTBUF_DBG_CTRL 0x0348
+#define DPLL 0x034A
+#define CBUS_ERR_ADDR 0x0350
+#define CBUS_ERR_CMD 0x0354
+#define CBUS_ERR_DATA_L 0x0358
+#define CBUS_ERR_DATA_H 0x035C
+#define USB_SIE_INTF_ADDR 0x0360
+#define USB_SIE_INTF_WD 0x0361
+#define USB_SIE_INTF_RD 0x0362
+#define USB_SIE_INTF_CTRL 0x0363
+#define LBUS_MON_ADDR 0x0364
+#define LBUS_ADDR_MASK 0x0368
+
+/* Boundary is 0x37F */
+
+/* 14. PCIE config register */
+#define TP_POLL 0x0500
+#define PM_CTRL 0x0502
+#define PCIF 0x0503
+
+#define THPDA 0x0514
+#define TMDA 0x0518
+#define TCDA 0x051C
+#define HDA 0x0520
+#define TVODA 0x0524
+#define TVIDA 0x0528
+#define TBEDA 0x052C
+#define TBKDA 0x0530
+#define TBDA 0x0534
+#define RCDA 0x0538
+#define RDQDA 0x053C
+#define DBI_WDATA 0x0540
+#define DBI_RDATA 0x0544
+#define DBI_CTRL 0x0548
+#define MDIO_DATA 0x0550
+#define MDIO_CTRL 0x0554
+#define PCI_RPWM 0x0561
+#define PCI_CPWM 0x0563
+
+/* Config register (Offset 0x800-) */
+#define PHY_CCA 0x803
+
+/* Min Spacing related settings. */
+#define MAX_MSS_DENSITY_2T 0x13
+#define MAX_MSS_DENSITY_1T 0x0A
+
+/* Rx DMA Control related settings */
+#define RXDMA_AGG_EN BIT(7)
+
+#define RPWM PCI_RPWM
+
+/* Regsiter Bit and Content definition */
+
+#define ISO_MD2PP BIT(0)
+#define ISO_PA2PCIE BIT(3)
+#define ISO_PLL2MD BIT(4)
+#define ISO_PWC_DV2RP BIT(11)
+#define ISO_PWC_RV2RP BIT(12)
+
+
+#define FEN_MREGEN BIT(15)
+#define FEN_DCORE BIT(11)
+#define FEN_CPUEN BIT(10)
+
+#define PAD_HWPD_IDN BIT(22)
+
+#define SYS_CLKSEL_80M BIT(0)
+#define SYS_PS_CLKSEL BIT(1)
+#define SYS_CPU_CLKSEL BIT(2)
+#define SYS_MAC_CLK_EN BIT(11)
+#define SYS_SWHW_SEL BIT(14)
+#define SYS_FWHW_SEL BIT(15)
+
+#define CmdEEPROM_En BIT(5)
+#define CmdEERPOMSEL BIT(4)
+#define Cmd9346CR_9356SEL BIT(4)
+
+#define AFE_MBEN BIT(1)
+#define AFE_BGEN BIT(0)
+
+#define SPS1_SWEN BIT(1)
+#define SPS1_LDEN BIT(0)
+
+#define RF_EN BIT(0)
+#define RF_RSTB BIT(1)
+#define RF_SDMRSTB BIT(2)
+
+#define LDA15_EN BIT(0)
+
+#define LDV12_EN BIT(0)
+#define LDV12_SDBY BIT(1)
+
+#define XTAL_GATE_AFE BIT(10)
+
+#define APLL_EN BIT(0)
+
+#define AFR_CardBEn BIT(0)
+#define AFR_CLKRUN_SEL BIT(1)
+#define AFR_FuncRegEn BIT(2)
+
+#define APSDOFF_STATUS BIT(15)
+#define APSDOFF BIT(14)
+#define BBRSTN BIT(13)
+#define BB_GLB_RSTN BIT(12)
+#define SCHEDULE_EN BIT(10)
+#define MACRXEN BIT(9)
+#define MACTXEN BIT(8)
+#define DDMA_EN BIT(7)
+#define FW2HW_EN BIT(6)
+#define RXDMA_EN BIT(5)
+#define TXDMA_EN BIT(4)
+#define HCI_RXDMA_EN BIT(3)
+#define HCI_TXDMA_EN BIT(2)
+
+#define StopHCCA BIT(6)
+#define StopHigh BIT(5)
+#define StopMgt BIT(4)
+#define StopVO BIT(3)
+#define StopVI BIT(2)
+#define StopBE BIT(1)
+#define StopBK BIT(0)
+
+#define LBK_NORMAL 0x00
+#define LBK_MAC_LB (BIT(0) | BIT(1) | BIT(3))
+#define LBK_MAC_DLB (BIT(0) | BIT(1))
+#define LBK_DMA_LB (BIT(0) | BIT(1) | BIT(2))
+
+#define TCP_OFDL_EN BIT(25)
+#define HWPC_TX_EN BIT(24)
+#define TXDMAPRE2FULL BIT(23)
+#define DISCW BIT(20)
+#define TCRICV BIT(19)
+#define CfendForm BIT(17)
+#define TCRCRC BIT(16)
+#define FAKE_IMEM_EN BIT(15)
+#define TSFRST BIT(9)
+#define TSFEN BIT(8)
+#define FWALLRDY (BIT(0) | BIT(1) | BIT(2) | \
+ BIT(3) | BIT(4) | BIT(5) | \
+ BIT(6) | BIT(7))
+#define FWRDY BIT(7)
+#define BASECHG BIT(6)
+#define IMEM BIT(5)
+#define DMEM_CODE_DONE BIT(4)
+#define EXT_IMEM_CHK_RPT BIT(3)
+#define EXT_IMEM_CODE_DONE BIT(2)
+#define IMEM_CHK_RPT BIT(1)
+#define IMEM_CODE_DONE BIT(0)
+#define IMEM_CODE_DONE BIT(0)
+#define IMEM_CHK_RPT BIT(1)
+#define EMEM_CODE_DONE BIT(2)
+#define EMEM_CHK_RPT BIT(3)
+#define DMEM_CODE_DONE BIT(4)
+#define IMEM_RDY BIT(5)
+#define BASECHG BIT(6)
+#define FWRDY BIT(7)
+#define LOAD_FW_READY (IMEM_CODE_DONE | \
+ IMEM_CHK_RPT | \
+ EMEM_CODE_DONE | \
+ EMEM_CHK_RPT | \
+ DMEM_CODE_DONE | \
+ IMEM_RDY | \
+ BASECHG | \
+ FWRDY)
+#define TCR_TSFEN BIT(8)
+#define TCR_TSFRST BIT(9)
+#define TCR_FAKE_IMEM_EN BIT(15)
+#define TCR_CRC BIT(16)
+#define TCR_ICV BIT(19)
+#define TCR_DISCW BIT(20)
+#define TCR_HWPC_TX_EN BIT(24)
+#define TCR_TCP_OFDL_EN BIT(25)
+#define TXDMA_INIT_VALUE (IMEM_CHK_RPT | \
+ EXT_IMEM_CHK_RPT)
+
+#define RCR_APPFCS BIT(31)
+#define RCR_DIS_ENC_2BYTE BIT(30)
+#define RCR_DIS_AES_2BYTE BIT(29)
+#define RCR_HTC_LOC_CTRL BIT(28)
+#define RCR_ENMBID BIT(27)
+#define RCR_RX_TCPOFDL_EN BIT(26)
+#define RCR_APP_PHYST_RXFF BIT(25)
+#define RCR_APP_PHYST_STAFF BIT(24)
+#define RCR_CBSSID BIT(23)
+#define RCR_APWRMGT BIT(22)
+#define RCR_ADD3 BIT(21)
+#define RCR_AMF BIT(20)
+#define RCR_ACF BIT(19)
+#define RCR_ADF BIT(18)
+#define RCR_APP_MIC BIT(17)
+#define RCR_APP_ICV BIT(16)
+#define RCR_RXFTH BIT(13)
+#define RCR_AICV BIT(12)
+#define RCR_RXDESC_LK_EN BIT(11)
+#define RCR_APP_BA_SSN BIT(6)
+#define RCR_ACRC32 BIT(5)
+#define RCR_RXSHFT_EN BIT(4)
+#define RCR_AB BIT(3)
+#define RCR_AM BIT(2)
+#define RCR_APM BIT(1)
+#define RCR_AAP BIT(0)
+#define RCR_MXDMA_OFFSET 8
+#define RCR_FIFO_OFFSET 13
+
+
+#define MSR_LINK_MASK ((1 << 0) | (1 << 1))
+#define MSR_LINK_MANAGED 2
+#define MSR_LINK_NONE 0
+#define MSR_LINK_SHIFT 0
+#define MSR_LINK_ADHOC 1
+#define MSR_LINK_MASTER 3
+#define MSR_NOLINK 0x00
+#define MSR_ADHOC 0x01
+#define MSR_INFRA 0x02
+#define MSR_AP 0x03
+
+#define ENUART BIT(7)
+#define ENJTAG BIT(3)
+#define BTMODE (BIT(2) | BIT(1))
+#define ENBT BIT(0)
+
+#define ENMBID BIT(7)
+#define BCNUM (BIT(6) | BIT(5) | BIT(4))
+
+#define USTIME_EDCA 0xFF00
+#define USTIME_TSF 0x00FF
+
+#define SIFS_TRX 0xFF00
+#define SIFS_CTX 0x00FF
+
+#define ENSWBCN BIT(15)
+#define DRVERLY_TU 0x0FF0
+#define DRVERLY_US 0x000F
+#define BCN_TCFG_CW_SHIFT 8
+#define BCN_TCFG_IFS 0
+
+#define RRSR_RSC_OFFSET 21
+#define RRSR_SHORT_OFFSET 23
+#define RRSR_RSC_BW_40M 0x600000
+#define RRSR_RSC_UPSUBCHNL 0x400000
+#define RRSR_RSC_LOWSUBCHNL 0x200000
+#define RRSR_SHORT 0x800000
+#define RRSR_1M BIT(0)
+#define RRSR_2M BIT(1)
+#define RRSR_5_5M BIT(2)
+#define RRSR_11M BIT(3)
+#define RRSR_6M BIT(4)
+#define RRSR_9M BIT(5)
+#define RRSR_12M BIT(6)
+#define RRSR_18M BIT(7)
+#define RRSR_24M BIT(8)
+#define RRSR_36M BIT(9)
+#define RRSR_48M BIT(10)
+#define RRSR_54M BIT(11)
+#define RRSR_MCS0 BIT(12)
+#define RRSR_MCS1 BIT(13)
+#define RRSR_MCS2 BIT(14)
+#define RRSR_MCS3 BIT(15)
+#define RRSR_MCS4 BIT(16)
+#define RRSR_MCS5 BIT(17)
+#define RRSR_MCS6 BIT(18)
+#define RRSR_MCS7 BIT(19)
+#define BRSR_AckShortPmb BIT(23)
+
+#define RATR_1M 0x00000001
+#define RATR_2M 0x00000002
+#define RATR_55M 0x00000004
+#define RATR_11M 0x00000008
+#define RATR_6M 0x00000010
+#define RATR_9M 0x00000020
+#define RATR_12M 0x00000040
+#define RATR_18M 0x00000080
+#define RATR_24M 0x00000100
+#define RATR_36M 0x00000200
+#define RATR_48M 0x00000400
+#define RATR_54M 0x00000800
+#define RATR_MCS0 0x00001000
+#define RATR_MCS1 0x00002000
+#define RATR_MCS2 0x00004000
+#define RATR_MCS3 0x00008000
+#define RATR_MCS4 0x00010000
+#define RATR_MCS5 0x00020000
+#define RATR_MCS6 0x00040000
+#define RATR_MCS7 0x00080000
+#define RATR_MCS8 0x00100000
+#define RATR_MCS9 0x00200000
+#define RATR_MCS10 0x00400000
+#define RATR_MCS11 0x00800000
+#define RATR_MCS12 0x01000000
+#define RATR_MCS13 0x02000000
+#define RATR_MCS14 0x04000000
+#define RATR_MCS15 0x08000000
+
+#define RATE_ALL_CCK (RATR_1M | RATR_2M | \
+ RATR_55M | RATR_11M)
+#define RATE_ALL_OFDM_AG (RATR_6M | RATR_9M | \
+ RATR_12M | RATR_18M | \
+ RATR_24M | RATR_36M | \
+ RATR_48M | RATR_54M)
+#define RATE_ALL_OFDM_1SS (RATR_MCS0 | RATR_MCS1 | \
+ RATR_MCS2 | RATR_MCS3 | \
+ RATR_MCS4 | RATR_MCS5 | \
+ RATR_MCS6 | RATR_MCS7)
+#define RATE_ALL_OFDM_2SS (RATR_MCS8 | RATR_MCS9 | \
+ RATR_MCS10 | RATR_MCS11 | \
+ RATR_MCS12 | RATR_MCS13 | \
+ RATR_MCS14 | RATR_MCS15)
+
+#define AC_PARAM_TXOP_LIMIT_OFFSET 16
+#define AC_PARAM_ECW_MAX_OFFSET 12
+#define AC_PARAM_ECW_MIN_OFFSET 8
+#define AC_PARAM_AIFS_OFFSET 0
+
+#define AcmHw_HwEn BIT(0)
+#define AcmHw_BeqEn BIT(1)
+#define AcmHw_ViqEn BIT(2)
+#define AcmHw_VoqEn BIT(3)
+#define AcmHw_BeqStatus BIT(4)
+#define AcmHw_ViqStatus BIT(5)
+#define AcmHw_VoqStatus BIT(6)
+
+#define RETRY_LIMIT_SHORT_SHIFT 8
+#define RETRY_LIMIT_LONG_SHIFT 0
+
+#define NAV_UPPER_EN BIT(16)
+#define NAV_UPPER 0xFF00
+#define NAV_RTSRST 0xFF
+
+#define BW_OPMODE_20MHZ BIT(2)
+#define BW_OPMODE_5G BIT(1)
+#define BW_OPMODE_11J BIT(0)
+
+#define RXERR_RPT_RST BIT(27)
+#define RXERR_OFDM_PPDU 0
+#define RXERR_OFDM_FALSE_ALARM 1
+#define RXERR_OFDM_MPDU_OK 2
+#define RXERR_OFDM_MPDU_FAIL 3
+#define RXERR_CCK_PPDU 4
+#define RXERR_CCK_FALSE_ALARM 5
+#define RXERR_CCK_MPDU_OK 6
+#define RXERR_CCK_MPDU_FAIL 7
+#define RXERR_HT_PPDU 8
+#define RXERR_HT_FALSE_ALARM 9
+#define RXERR_HT_MPDU_TOTAL 10
+#define RXERR_HT_MPDU_OK 11
+#define RXERR_HT_MPDU_FAIL 12
+#define RXERR_RX_FULL_DROP 15
+
+#define SCR_TXUSEDK BIT(0)
+#define SCR_RXUSEDK BIT(1)
+#define SCR_TXENCENABLE BIT(2)
+#define SCR_RXENCENABLE BIT(3)
+#define SCR_SKBYA2 BIT(4)
+#define SCR_NOSKMC BIT(5)
+
+#define CAM_VALID BIT(15)
+#define CAM_NOTVALID 0x0000
+#define CAM_USEDK BIT(5)
+
+#define CAM_NONE 0x0
+#define CAM_WEP40 0x01
+#define CAM_TKIP 0x02
+#define CAM_AES 0x04
+#define CAM_WEP104 0x05
+
+#define TOTAL_CAM_ENTRY 32
+#define HALF_CAM_ENTRY 16
+
+#define CAM_WRITE BIT(16)
+#define CAM_READ 0x00000000
+#define CAM_POLLINIG BIT(31)
+
+#define WOW_PMEN BIT(0)
+#define WOW_WOMEN BIT(1)
+#define WOW_MAGIC BIT(2)
+#define WOW_UWF BIT(3)
+
+#define GPIOMUX_EN BIT(3)
+#define GPIOSEL_GPIO 0
+#define GPIOSEL_PHYDBG 1
+#define GPIOSEL_BT 2
+#define GPIOSEL_WLANDBG 3
+#define GPIOSEL_GPIO_MASK (~(BIT(0)|BIT(1)))
+
+#define HST_RDBUSY BIT(0)
+#define CPU_WTBUSY BIT(1)
+
+#define IMR8190_DISABLED 0x0
+#define IMR_CPUERR BIT(5)
+#define IMR_ATIMEND BIT(4)
+#define IMR_TBDOK BIT(3)
+#define IMR_TBDER BIT(2)
+#define IMR_BCNDMAINT8 BIT(1)
+#define IMR_BCNDMAINT7 BIT(0)
+#define IMR_BCNDMAINT6 BIT(31)
+#define IMR_BCNDMAINT5 BIT(30)
+#define IMR_BCNDMAINT4 BIT(29)
+#define IMR_BCNDMAINT3 BIT(28)
+#define IMR_BCNDMAINT2 BIT(27)
+#define IMR_BCNDMAINT1 BIT(26)
+#define IMR_BCNDOK8 BIT(25)
+#define IMR_BCNDOK7 BIT(24)
+#define IMR_BCNDOK6 BIT(23)
+#define IMR_BCNDOK5 BIT(22)
+#define IMR_BCNDOK4 BIT(21)
+#define IMR_BCNDOK3 BIT(20)
+#define IMR_BCNDOK2 BIT(19)
+#define IMR_BCNDOK1 BIT(18)
+#define IMR_TIMEOUT2 BIT(17)
+#define IMR_TIMEOUT1 BIT(16)
+#define IMR_TXFOVW BIT(15)
+#define IMR_PSTIMEOUT BIT(14)
+#define IMR_BCNINT BIT(13)
+#define IMR_RXFOVW BIT(12)
+#define IMR_RDU BIT(11)
+#define IMR_RXCMDOK BIT(10)
+#define IMR_BDOK BIT(9)
+#define IMR_HIGHDOK BIT(8)
+#define IMR_COMDOK BIT(7)
+#define IMR_MGNTDOK BIT(6)
+#define IMR_HCCADOK BIT(5)
+#define IMR_BKDOK BIT(4)
+#define IMR_BEDOK BIT(3)
+#define IMR_VIDOK BIT(2)
+#define IMR_VODOK BIT(1)
+#define IMR_ROK BIT(0)
+
+#define TPPOLL_BKQ BIT(0)
+#define TPPOLL_BEQ BIT(1)
+#define TPPOLL_VIQ BIT(2)
+#define TPPOLL_VOQ BIT(3)
+#define TPPOLL_BQ BIT(4)
+#define TPPOLL_CQ BIT(5)
+#define TPPOLL_MQ BIT(6)
+#define TPPOLL_HQ BIT(7)
+#define TPPOLL_HCCAQ BIT(8)
+#define TPPOLL_STOPBK BIT(9)
+#define TPPOLL_STOPBE BIT(10)
+#define TPPOLL_STOPVI BIT(11)
+#define TPPOLL_STOPVO BIT(12)
+#define TPPOLL_STOPMGT BIT(13)
+#define TPPOLL_STOPHIGH BIT(14)
+#define TPPOLL_STOPHCCA BIT(15)
+#define TPPOLL_SHIFT 8
+
+#define CCX_CMD_CLM_ENABLE BIT(0)
+#define CCX_CMD_NHM_ENABLE BIT(1)
+#define CCX_CMD_FUNCTION_ENABLE BIT(8)
+#define CCX_CMD_IGNORE_CCA BIT(9)
+#define CCX_CMD_IGNORE_TXON BIT(10)
+#define CCX_CLM_RESULT_READY BIT(16)
+#define CCX_NHM_RESULT_READY BIT(16)
+#define CCX_CMD_RESET 0x0
+
+
+#define HWSET_MAX_SIZE_92S 128
+#define EFUSE_MAX_SECTION 16
+#define EFUSE_REAL_CONTENT_LEN 512
+
+#define RTL8190_EEPROM_ID 0x8129
+#define EEPROM_HPON 0x02
+#define EEPROM_CLK 0x06
+#define EEPROM_TESTR 0x08
+
+#define EEPROM_VID 0x0A
+#define EEPROM_DID 0x0C
+#define EEPROM_SVID 0x0E
+#define EEPROM_SMID 0x10
+
+#define EEPROM_MAC_ADDR 0x12
+#define EEPROM_NODE_ADDRESS_BYTE_0 0x12
+
+#define EEPROM_PWDIFF 0x54
+
+#define EEPROM_TXPOWERBASE 0x50
+#define EEPROM_TX_PWR_INDEX_RANGE 28
+
+#define EEPROM_TX_PWR_HT20_DIFF 0x62
+#define DEFAULT_HT20_TXPWR_DIFF 2
+#define EEPROM_TX_PWR_OFDM_DIFF 0x65
+
+#define EEPROM_TXPWRGROUP 0x67
+#define EEPROM_REGULATORY 0x6D
+
+#define TX_PWR_SAFETY_CHK 0x6D
+#define EEPROM_TXPWINDEX_CCK_24G 0x5D
+#define EEPROM_TXPWINDEX_OFDM_24G 0x6B
+#define EEPROM_HT2T_CH1_A 0x6c
+#define EEPROM_HT2T_CH7_A 0x6d
+#define EEPROM_HT2T_CH13_A 0x6e
+#define EEPROM_HT2T_CH1_B 0x6f
+#define EEPROM_HT2T_CH7_B 0x70
+#define EEPROM_HT2T_CH13_B 0x71
+
+#define EEPROM_TSSI_A 0x74
+#define EEPROM_TSSI_B 0x75
+
+#define EEPROM_RFIND_POWERDIFF 0x76
+#define EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF 0x3
+
+#define EEPROM_THERMALMETER 0x77
+#define EEPROM_BLUETOOTH_COEXIST 0x78
+#define EEPROM_BLUETOOTH_TYPE 0x4f
+
+#define EEPROM_OPTIONAL 0x78
+#define EEPROM_WOWLAN 0x78
+
+#define EEPROM_CRYSTALCAP 0x79
+#define EEPROM_CHANNELPLAN 0x7B
+#define EEPROM_VERSION 0x7C
+#define EEPROM_CUSTOMID 0x7A
+#define EEPROM_BOARDTYPE 0x7E
+
+#define EEPROM_CHANNEL_PLAN_FCC 0x0
+#define EEPROM_CHANNEL_PLAN_IC 0x1
+#define EEPROM_CHANNEL_PLAN_ETSI 0x2
+#define EEPROM_CHANNEL_PLAN_SPAIN 0x3
+#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
+#define EEPROM_CHANNEL_PLAN_MKK 0x5
+#define EEPROM_CHANNEL_PLAN_MKK1 0x6
+#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
+#define EEPROM_CHANNEL_PLAN_TELEC 0x8
+#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
+#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
+#define EEPROM_CHANNEL_PLAN_NCC 0xB
+#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
+
+#define FW_DIG_DISABLE 0xfd00cc00
+#define FW_DIG_ENABLE 0xfd000000
+#define FW_DIG_HALT 0xfd000001
+#define FW_DIG_RESUME 0xfd000002
+#define FW_HIGH_PWR_DISABLE 0xfd000008
+#define FW_HIGH_PWR_ENABLE 0xfd000009
+#define FW_ADD_A2_ENTRY 0xfd000016
+#define FW_TXPWR_TRACK_ENABLE 0xfd000017
+#define FW_TXPWR_TRACK_DISABLE 0xfd000018
+#define FW_TXPWR_TRACK_THERMAL 0xfd000019
+#define FW_TXANT_SWITCH_ENABLE 0xfd000023
+#define FW_TXANT_SWITCH_DISABLE 0xfd000024
+#define FW_RA_INIT 0xfd000026
+#define FW_CTRL_DM_BY_DRIVER 0Xfd00002a
+#define FW_RA_IOT_BG_COMB 0xfd000030
+#define FW_RA_IOT_N_COMB 0xfd000031
+#define FW_RA_REFRESH 0xfd0000a0
+#define FW_RA_UPDATE_MASK 0xfd0000a2
+#define FW_RA_DISABLE 0xfd0000a4
+#define FW_RA_ACTIVE 0xfd0000a6
+#define FW_RA_DISABLE_RSSI_MASK 0xfd0000ac
+#define FW_RA_ENABLE_RSSI_MASK 0xfd0000ad
+#define FW_RA_RESET 0xfd0000af
+#define FW_DM_DISABLE 0xfd00aa00
+#define FW_IQK_ENABLE 0xf0000020
+#define FW_IQK_SUCCESS 0x0000dddd
+#define FW_IQK_FAIL 0x0000ffff
+#define FW_OP_FAILURE 0xffffffff
+#define FW_TX_FEEDBACK_NONE 0xfb000000
+#define FW_TX_FEEDBACK_DTM_ENABLE (FW_TX_FEEDBACK_NONE | 0x1)
+#define FW_TX_FEEDBACK_CCX_ENABL (FW_TX_FEEDBACK_NONE | 0x2)
+#define FW_BB_RESET_ENABLE 0xff00000d
+#define FW_BB_RESET_DISABLE 0xff00000e
+#define FW_CCA_CHK_ENABLE 0xff000011
+#define FW_CCK_RESET_CNT 0xff000013
+#define FW_LPS_ENTER 0xfe000010
+#define FW_LPS_LEAVE 0xfe000011
+#define FW_INDIRECT_READ 0xf2000000
+#define FW_INDIRECT_WRITE 0xf2000001
+#define FW_CHAN_SET 0xf3000001
+
+#define RFPC 0x5F
+#define RCR_9356SEL BIT(6)
+#define TCR_LRL_OFFSET 0
+#define TCR_SRL_OFFSET 8
+#define TCR_MXDMA_OFFSET 21
+#define TCR_SAT BIT(24)
+#define RCR_MXDMA_OFFSET 8
+#define RCR_FIFO_OFFSET 13
+#define RCR_OnlyErlPkt BIT(31)
+#define CWR 0xDC
+#define RETRYCTR 0xDE
+
+#define CPU_GEN_SYSTEM_RESET 0x00000001
+
+#define CCX_COMMAND_REG 0x890
+#define CLM_PERIOD_REG 0x894
+#define NHM_PERIOD_REG 0x896
+
+#define NHM_THRESHOLD0 0x898
+#define NHM_THRESHOLD1 0x899
+#define NHM_THRESHOLD2 0x89A
+#define NHM_THRESHOLD3 0x89B
+#define NHM_THRESHOLD4 0x89C
+#define NHM_THRESHOLD5 0x89D
+#define NHM_THRESHOLD6 0x89E
+#define CLM_RESULT_REG 0x8D0
+#define NHM_RESULT_REG 0x8D4
+#define NHM_RPI_COUNTER0 0x8D8
+#define NHM_RPI_COUNTER1 0x8D9
+#define NHM_RPI_COUNTER2 0x8DA
+#define NHM_RPI_COUNTER3 0x8DB
+#define NHM_RPI_COUNTER4 0x8DC
+#define NHM_RPI_COUNTER5 0x8DD
+#define NHM_RPI_COUNTER6 0x8DE
+#define NHM_RPI_COUNTER7 0x8DF
+
+#define HAL_8192S_HW_GPIO_OFF_BIT BIT(3)
+#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
+#define HAL_8192S_HW_GPIO_WPS_BIT BIT(4)
+
+#define RPMAC_RESET 0x100
+#define RPMAC_TXSTART 0x104
+#define RPMAC_TXLEGACYSIG 0x108
+#define RPMAC_TXHTSIG1 0x10c
+#define RPMAC_TXHTSIG2 0x110
+#define RPMAC_PHYDEBUG 0x114
+#define RPMAC_TXPACKETNNM 0x118
+#define RPMAC_TXIDLE 0x11c
+#define RPMAC_TXMACHEADER0 0x120
+#define RPMAC_TXMACHEADER1 0x124
+#define RPMAC_TXMACHEADER2 0x128
+#define RPMAC_TXMACHEADER3 0x12c
+#define RPMAC_TXMACHEADER4 0x130
+#define RPMAC_TXMACHEADER5 0x134
+#define RPMAC_TXDATATYPE 0x138
+#define RPMAC_TXRANDOMSEED 0x13c
+#define RPMAC_CCKPLCPPREAMBLE 0x140
+#define RPMAC_CCKPLCPHEADER 0x144
+#define RPMAC_CCKCRC16 0x148
+#define RPMAC_OFDMRXCRC32OK 0x170
+#define RPMAC_OFDMRXCRC32ER 0x174
+#define RPMAC_OFDMRXPARITYER 0x178
+#define RPMAC_OFDMRXCRC8ER 0x17c
+#define RPMAC_CCKCRXRC16ER 0x180
+#define RPMAC_CCKCRXRC32ER 0x184
+#define RPMAC_CCKCRXRC32OK 0x188
+#define RPMAC_TXSTATUS 0x18c
+
+#define RF_BB_CMD_ADDR 0x02c0
+#define RF_BB_CMD_DATA 0x02c4
+
+#define RFPGA0_RFMOD 0x800
+
+#define RFPGA0_TXINFO 0x804
+#define RFPGA0_PSDFUNCTION 0x808
+
+#define RFPGA0_TXGAINSTAGE 0x80c
+
+#define RFPGA0_RFTIMING1 0x810
+#define RFPGA0_RFTIMING2 0x814
+#define RFPGA0_XA_HSSIPARAMETER1 0x820
+#define RFPGA0_XA_HSSIPARAMETER2 0x824
+#define RFPGA0_XB_HSSIPARAMETER1 0x828
+#define RFPGA0_XB_HSSIPARAMETER2 0x82c
+#define RFPGA0_XC_HSSIPARAMETER1 0x830
+#define RFPGA0_XC_HSSIPARAMETER2 0x834
+#define RFPGA0_XD_HSSIPARAMETER1 0x838
+#define RFPGA0_XD_HSSIPARAMETER2 0x83c
+#define RFPGA0_XA_LSSIPARAMETER 0x840
+#define RFPGA0_XB_LSSIPARAMETER 0x844
+#define RFPGA0_XC_LSSIPARAMETER 0x848
+#define RFPGA0_XD_LSSIPARAMETER 0x84c
+
+#define RFPGA0_RFWAKEUP_PARAMETER 0x850
+#define RFPGA0_RFSLEEPUP_PARAMETER 0x854
+
+#define RFPGA0_XAB_SWITCHCONTROL 0x858
+#define RFPGA0_XCD_SWITCHCONTROL 0x85c
+
+#define RFPGA0_XA_RFINTERFACEOE 0x860
+#define RFPGA0_XB_RFINTERFACEOE 0x864
+#define RFPGA0_XC_RFINTERFACEOE 0x868
+#define RFPGA0_XD_RFINTERFACEOE 0x86c
+
+#define RFPGA0_XAB_RFINTERFACESW 0x870
+#define RFPGA0_XCD_RFINTERFACESW 0x874
+
+#define RFPGA0_XAB_RFPARAMETER 0x878
+#define RFPGA0_XCD_RFPARAMETER 0x87c
+
+#define RFPGA0_ANALOGPARAMETER1 0x880
+#define RFPGA0_ANALOGPARAMETER2 0x884
+#define RFPGA0_ANALOGPARAMETER3 0x888
+#define RFPGA0_ANALOGPARAMETER4 0x88c
+
+#define RFPGA0_XA_LSSIREADBACK 0x8a0
+#define RFPGA0_XB_LSSIREADBACK 0x8a4
+#define RFPGA0_XC_LSSIREADBACK 0x8a8
+#define RFPGA0_XD_LSSIREADBACK 0x8ac
+
+#define RFPGA0_PSDREPORT 0x8b4
+#define TRANSCEIVERA_HSPI_READBACK 0x8b8
+#define TRANSCEIVERB_HSPI_READBACK 0x8bc
+#define RFPGA0_XAB_RFINTERFACERB 0x8e0
+#define RFPGA0_XCD_RFINTERFACERB 0x8e4
+#define RFPGA1_RFMOD 0x900
+
+#define RFPGA1_TXBLOCK 0x904
+#define RFPGA1_DEBUGSELECT 0x908
+#define RFPGA1_TXINFO 0x90c
+
+#define RCCK0_SYSTEM 0xa00
+
+#define RCCK0_AFESETTING 0xa04
+#define RCCK0_CCA 0xa08
+
+#define RCCK0_RXAGC1 0xa0c
+#define RCCK0_RXAGC2 0xa10
+
+#define RCCK0_RXHP 0xa14
+
+#define RCCK0_DSPPARAMETER1 0xa18
+#define RCCK0_DSPPARAMETER2 0xa1c
+
+#define RCCK0_TXFILTER1 0xa20
+#define RCCK0_TXFILTER2 0xa24
+#define RCCK0_DEBUGPORT 0xa28
+#define RCCK0_FALSEALARMREPORT 0xa2c
+#define RCCK0_TRSSIREPORT 0xa50
+#define RCCK0_RXREPORT 0xa54
+#define RCCK0_FACOUNTERLOWER 0xa5c
+#define RCCK0_FACOUNTERUPPER 0xa58
+
+#define ROFDM0_LSTF 0xc00
+
+#define ROFDM0_TRXPATHENABLE 0xc04
+#define ROFDM0_TRMUXPAR 0xc08
+#define ROFDM0_TRSWISOLATION 0xc0c
+
+#define ROFDM0_XARXAFE 0xc10
+#define ROFDM0_XARXIQIMBALANCE 0xc14
+#define ROFDM0_XBRXAFE 0xc18
+#define ROFDM0_XBRXIQIMBALANCE 0xc1c
+#define ROFDM0_XCRXAFE 0xc20
+#define ROFDM0_XCRXIQIMBALANCE 0xc24
+#define ROFDM0_XDRXAFE 0xc28
+#define ROFDM0_XDRXIQIMBALANCE 0xc2c
+
+#define ROFDM0_RXDETECTOR1 0xc30
+#define ROFDM0_RXDETECTOR2 0xc34
+#define ROFDM0_RXDETECTOR3 0xc38
+#define ROFDM0_RXDETECTOR4 0xc3c
+
+#define ROFDM0_RXDSP 0xc40
+#define ROFDM0_CFO_AND_DAGC 0xc44
+#define ROFDM0_CCADROP_THRESHOLD 0xc48
+#define ROFDM0_ECCA_THRESHOLD 0xc4c
+
+#define ROFDM0_XAAGCCORE1 0xc50
+#define ROFDM0_XAAGCCORE2 0xc54
+#define ROFDM0_XBAGCCORE1 0xc58
+#define ROFDM0_XBAGCCORE2 0xc5c
+#define ROFDM0_XCAGCCORE1 0xc60
+#define ROFDM0_XCAGCCORE2 0xc64
+#define ROFDM0_XDAGCCORE1 0xc68
+#define ROFDM0_XDAGCCORE2 0xc6c
+
+#define ROFDM0_AGCPARAMETER1 0xc70
+#define ROFDM0_AGCPARAMETER2 0xc74
+#define ROFDM0_AGCRSSITABLE 0xc78
+#define ROFDM0_HTSTFAGC 0xc7c
+
+#define ROFDM0_XATXIQIMBALANCE 0xc80
+#define ROFDM0_XATXAFE 0xc84
+#define ROFDM0_XBTXIQIMBALANCE 0xc88
+#define ROFDM0_XBTXAFE 0xc8c
+#define ROFDM0_XCTXIQIMBALANCE 0xc90
+#define ROFDM0_XCTXAFE 0xc94
+#define ROFDM0_XDTXIQIMBALANCE 0xc98
+#define ROFDM0_XDTXAFE 0xc9c
+
+#define ROFDM0_RXHP_PARAMETER 0xce0
+#define ROFDM0_TXPSEUDO_NOISE_WGT 0xce4
+#define ROFDM0_FRAME_SYNC 0xcf0
+#define ROFDM0_DFSREPORT 0xcf4
+#define ROFDM0_TXCOEFF1 0xca4
+#define ROFDM0_TXCOEFF2 0xca8
+#define ROFDM0_TXCOEFF3 0xcac
+#define ROFDM0_TXCOEFF4 0xcb0
+#define ROFDM0_TXCOEFF5 0xcb4
+#define ROFDM0_TXCOEFF6 0xcb8
+
+
+#define ROFDM1_LSTF 0xd00
+#define ROFDM1_TRXPATHENABLE 0xd04
+
+#define ROFDM1_CFO 0xd08
+#define ROFDM1_CSI1 0xd10
+#define ROFDM1_SBD 0xd14
+#define ROFDM1_CSI2 0xd18
+#define ROFDM1_CFOTRACKING 0xd2c
+#define ROFDM1_TRXMESAURE1 0xd34
+#define ROFDM1_INTF_DET 0xd3c
+#define ROFDM1_PSEUDO_NOISESTATEAB 0xd50
+#define ROFDM1_PSEUDO_NOISESTATECD 0xd54
+#define ROFDM1_RX_PSEUDO_NOISE_WGT 0xd58
+
+#define ROFDM_PHYCOUNTER1 0xda0
+#define ROFDM_PHYCOUNTER2 0xda4
+#define ROFDM_PHYCOUNTER3 0xda8
+
+#define ROFDM_SHORT_CFOAB 0xdac
+#define ROFDM_SHORT_CFOCD 0xdb0
+#define ROFDM_LONG_CFOAB 0xdb4
+#define ROFDM_LONG_CFOCD 0xdb8
+#define ROFDM_TAIL_CFOAB 0xdbc
+#define ROFDM_TAIL_CFOCD 0xdc0
+#define ROFDM_PW_MEASURE1 0xdc4
+#define ROFDM_PW_MEASURE2 0xdc8
+#define ROFDM_BW_REPORT 0xdcc
+#define ROFDM_AGC_REPORT 0xdd0
+#define ROFDM_RXSNR 0xdd4
+#define ROFDM_RXEVMCSI 0xdd8
+#define ROFDM_SIG_REPORT 0xddc
+
+
+#define RTXAGC_RATE18_06 0xe00
+#define RTXAGC_RATE54_24 0xe04
+#define RTXAGC_CCK_MCS32 0xe08
+#define RTXAGC_MCS03_MCS00 0xe10
+#define RTXAGC_MCS07_MCS04 0xe14
+#define RTXAGC_MCS11_MCS08 0xe18
+#define RTXAGC_MCS15_MCS12 0xe1c
+
+
+#define RF_AC 0x00
+#define RF_IQADJ_G1 0x01
+#define RF_IQADJ_G2 0x02
+#define RF_POW_TRSW 0x05
+#define RF_GAIN_RX 0x06
+#define RF_GAIN_TX 0x07
+#define RF_TXM_IDAC 0x08
+#define RF_BS_IQGEN 0x0F
+
+#define RF_MODE1 0x10
+#define RF_MODE2 0x11
+#define RF_RX_AGC_HP 0x12
+#define RF_TX_AGC 0x13
+#define RF_BIAS 0x14
+#define RF_IPA 0x15
+#define RF_POW_ABILITY 0x17
+#define RF_MODE_AG 0x18
+#define RF_CHANNEL 0x18
+#define RF_CHNLBW 0x18
+#define RF_TOP 0x19
+#define RF_RX_G1 0x1A
+#define RF_RX_G2 0x1B
+#define RF_RX_BB2 0x1C
+#define RF_RX_BB1 0x1D
+#define RF_RCK1 0x1E
+#define RF_RCK2 0x1F
+
+#define RF_TX_G1 0x20
+#define RF_TX_G2 0x21
+#define RF_TX_G3 0x22
+#define RF_TX_BB1 0x23
+#define RF_T_METER 0x24
+#define RF_SYN_G1 0x25
+#define RF_SYN_G2 0x26
+#define RF_SYN_G3 0x27
+#define RF_SYN_G4 0x28
+#define RF_SYN_G5 0x29
+#define RF_SYN_G6 0x2A
+#define RF_SYN_G7 0x2B
+#define RF_SYN_G8 0x2C
+
+#define RF_RCK_OS 0x30
+#define RF_TXPA_G1 0x31
+#define RF_TXPA_G2 0x32
+#define RF_TXPA_G3 0x33
+
+#define BRFMOD 0x1
+#define BCCKEN 0x1000000
+#define BOFDMEN 0x2000000
+
+#define BXBTXAGC 0xf00
+#define BXCTXAGC 0xf000
+#define BXDTXAGC 0xf0000
+
+#define B3WIRE_DATALENGTH 0x800
+#define B3WIRE_ADDRESSLENGTH 0x400
+
+#define BRFSI_RFENV 0x10
+
+#define BLSSI_READADDRESS 0x7f800000
+#define BLSSI_READEDGE 0x80000000
+#define BLSSI_READBACK_DATA 0xfffff
+
+#define BADCLKPHASE 0x4000000
+
+#define BCCK_SIDEBAND 0x10
+
+#define BTX_AGCRATECCK 0x7f00
+
+#define MASKBYTE0 0xff
+#define MASKBYTE1 0xff00
+#define MASKBYTE2 0xff0000
+#define MASKBYTE3 0xff000000
+#define MASKHWORD 0xffff0000
+#define MASKLWORD 0x0000ffff
+#define MASKDWORD 0xffffffff
+
+#define MAKS12BITS 0xfffff
+#define MASK20BITS 0xfffff
+#define RFREG_OFFSET_MASK 0xfffff
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
new file mode 100644
index 0000000..1d3a483
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -0,0 +1,546 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+
+static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
+ u8 chnl, u32 *ofdmbase, u32 *mcsbase,
+ u8 *p_final_pwridx)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 pwrbase0, pwrbase1;
+ u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
+ u8 i, pwrlevel[4];
+
+ for (i = 0; i < 2; i++)
+ pwrlevel[i] = p_pwrlevel[i];
+
+ /* We only care about the path A for legacy. */
+ if (rtlefuse->eeprom_version < 2) {
+ pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
+ } else if (rtlefuse->eeprom_version >= 2) {
+ legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
+ [RF90_PATH_A][chnl - 1];
+
+ /* For legacy OFDM, tx pwr always > HT OFDM pwr.
+ * We do not care Path B
+ * legacy OFDM pwr diff. NO BB register
+ * to notify HW. */
+ pwrbase0 = pwrlevel[0] + legacy_pwrdiff;
+ }
+
+ pwrbase0 = (pwrbase0 << 24) | (pwrbase0 << 16) | (pwrbase0 << 8) |
+ pwrbase0;
+ *ofdmbase = pwrbase0;
+
+ /* MCS rates */
+ if (rtlefuse->eeprom_version >= 2) {
+ /* Check HT20 to HT40 diff */
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+ for (i = 0; i < 2; i++) {
+ /* rf-A, rf-B */
+ /* HT 20<->40 pwr diff */
+ ht20_pwrdiff = rtlefuse->txpwr_ht20diff
+ [i][chnl - 1];
+
+ if (ht20_pwrdiff < 8) /* 0~+7 */
+ pwrlevel[i] += ht20_pwrdiff;
+ else /* index8-15=-8~-1 */
+ pwrlevel[i] -= (16 - ht20_pwrdiff);
+ }
+ }
+ }
+
+ /* use index of rf-A */
+ pwrbase1 = pwrlevel[0];
+ pwrbase1 = (pwrbase1 << 24) | (pwrbase1 << 16) | (pwrbase1 << 8) |
+ pwrbase1;
+ *mcsbase = pwrbase1;
+
+ /* The following is for Antenna
+ * diff from Ant-B to Ant-A */
+ p_final_pwridx[0] = pwrlevel[0];
+ p_final_pwridx[1] = pwrlevel[1];
+
+ switch (rtlefuse->eeprom_regulatory) {
+ case 3:
+ /* The following is for calculation
+ * of the power diff for Ant-B to Ant-A. */
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ p_final_pwridx[0] += rtlefuse->pwrgroup_ht40
+ [RF90_PATH_A][
+ chnl - 1];
+ p_final_pwridx[1] += rtlefuse->pwrgroup_ht40
+ [RF90_PATH_B][
+ chnl - 1];
+ } else {
+ p_final_pwridx[0] += rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][
+ chnl - 1];
+ p_final_pwridx[1] += rtlefuse->pwrgroup_ht20
+ [RF90_PATH_B][
+ chnl - 1];
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("40MHz finalpwr_idx "
+ "(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0],
+ p_final_pwridx[1]));
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("20MHz finalpwr_idx "
+ "(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0],
+ p_final_pwridx[1]));
+ }
+}
+
+static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
+ u8 *p_final_pwridx)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ char ant_pwr_diff = 0;
+ u32 u4reg_val = 0;
+
+ if (rtlphy->rf_type == RF_2T2R) {
+ ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0];
+
+ /* range is from 7~-8,
+ * index = 0x0~0xf */
+ if (ant_pwr_diff > 7)
+ ant_pwr_diff = 7;
+ if (ant_pwr_diff < -8)
+ ant_pwr_diff = -8;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Antenna Diff from RF-B "
+ "to RF-A = %d (0x%x)\n", ant_pwr_diff,
+ ant_pwr_diff & 0xf));
+
+ ant_pwr_diff &= 0xf;
+ }
+
+ /* Antenna TX power difference */
+ rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */
+ rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */
+ rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff); /* RF-B */
+
+ u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 |
+ rtlefuse->antenna_txpwdiff[1] << 4 |
+ rtlefuse->antenna_txpwdiff[0];
+
+ rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
+ u4reg_val);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Write BCD-Diff(0x%x) = 0x%x\n",
+ RFPGA0_TXGAINSTAGE, u4reg_val));
+}
+
+static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
+ u8 chnl, u8 index,
+ u32 pwrbase0,
+ u32 pwrbase1,
+ u32 *p_outwrite_val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 i, chnlgroup, pwrdiff_limit[4];
+ u32 writeval, customer_limit;
+
+ /* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
+ switch (rtlefuse->eeprom_regulatory) {
+ case 0:
+ /* Realtek better performance increase power diff
+ * defined by Realtek for large power */
+ chnlgroup = 0;
+
+ writeval = rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index] +
+ ((index < 2) ? pwrbase0 : pwrbase1);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("RTK better performance, "
+ "writeval = 0x%x\n", writeval));
+ break;
+ case 1:
+ /* Realtek regulatory increase power diff defined
+ * by Realtek for regulatory */
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ writeval = ((index < 2) ? pwrbase0 : pwrbase1);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Realtek regulatory, "
+ "40MHz, writeval = 0x%x\n", writeval));
+ } else {
+ if (rtlphy->pwrgroup_cnt == 1)
+ chnlgroup = 0;
+
+ if (rtlphy->pwrgroup_cnt >= 3) {
+ if (chnl <= 3)
+ chnlgroup = 0;
+ else if (chnl >= 4 && chnl <= 8)
+ chnlgroup = 1;
+ else if (chnl > 8)
+ chnlgroup = 2;
+ if (rtlphy->pwrgroup_cnt == 4)
+ chnlgroup++;
+ }
+
+ writeval = rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index]
+ + ((index < 2) ?
+ pwrbase0 : pwrbase1);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Realtek regulatory, "
+ "20MHz, writeval = 0x%x\n", writeval));
+ }
+ break;
+ case 2:
+ /* Better regulatory don't increase any power diff */
+ writeval = ((index < 2) ? pwrbase0 : pwrbase1);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Better regulatory, "
+ "writeval = 0x%x\n", writeval));
+ break;
+ case 3:
+ /* Customer defined power diff. increase power diff
+ defined by customer. */
+ chnlgroup = 0;
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("customer's limit, 40MHz = 0x%x\n",
+ rtlefuse->pwrgroup_ht40
+ [RF90_PATH_A][chnl - 1]));
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("customer's limit, 20MHz = 0x%x\n",
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1]));
+ }
+
+ for (i = 0; i < 4; i++) {
+ pwrdiff_limit[i] =
+ (u8)((rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index] & (0x7f << (i * 8)))
+ >> (i * 8));
+
+ if (rtlphy->current_chan_bw ==
+ HT_CHANNEL_WIDTH_20_40) {
+ if (pwrdiff_limit[i] >
+ rtlefuse->pwrgroup_ht40
+ [RF90_PATH_A][chnl - 1]) {
+ pwrdiff_limit[i] =
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1];
+ }
+ } else {
+ if (pwrdiff_limit[i] >
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1]) {
+ pwrdiff_limit[i] =
+ rtlefuse->pwrgroup_ht20
+ [RF90_PATH_A][chnl - 1];
+ }
+ }
+ }
+
+ customer_limit = (pwrdiff_limit[3] << 24) |
+ (pwrdiff_limit[2] << 16) |
+ (pwrdiff_limit[1] << 8) |
+ (pwrdiff_limit[0]);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Customer's limit = 0x%x\n",
+ customer_limit));
+
+ writeval = customer_limit + ((index < 2) ?
+ pwrbase0 : pwrbase1);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Customer, writeval = "
+ "0x%x\n", writeval));
+ break;
+ default:
+ chnlgroup = 0;
+ writeval = rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index] +
+ ((index < 2) ? pwrbase0 : pwrbase1);
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("RTK better performance, "
+ "writeval = 0x%x\n", writeval));
+ break;
+ }
+
+ if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1)
+ writeval = 0x10101010;
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TX_HIGH_PWR_LEVEL_LEVEL2)
+ writeval = 0x0;
+
+ *p_outwrite_val = writeval;
+
+}
+
+static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw,
+ u8 index, u32 val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
+ u8 i, rfa_pwr[4];
+ u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
+ u32 writeval = val;
+
+ /* If path A and Path B coexist, we must limit Path A tx power.
+ * Protect Path B pwr over or under flow. We need to calculate
+ * upper and lower bound of path A tx power. */
+ if (rtlphy->rf_type == RF_2T2R) {
+ rf_pwr_diff = rtlefuse->antenna_txpwdiff[0];
+
+ /* Diff=-8~-1 */
+ if (rf_pwr_diff >= 8) {
+ /* Prevent underflow!! */
+ rfa_lower_bound = 0x10 - rf_pwr_diff;
+ /* if (rf_pwr_diff >= 0) Diff = 0-7 */
+ } else {
+ rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff;
+ }
+ }
+
+ for (i = 0; i < 4; i++) {
+ rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8));
+ if (rfa_pwr[i] > RF6052_MAX_TX_PWR)
+ rfa_pwr[i] = RF6052_MAX_TX_PWR;
+
+ /* If path A and Path B coexist, we must limit Path A tx power.
+ * Protect Path B pwr over or under flow. We need to calculate
+ * upper and lower bound of path A tx power. */
+ if (rtlphy->rf_type == RF_2T2R) {
+ /* Diff=-8~-1 */
+ if (rf_pwr_diff >= 8) {
+ /* Prevent underflow!! */
+ if (rfa_pwr[i] < rfa_lower_bound)
+ rfa_pwr[i] = rfa_lower_bound;
+ /* Diff = 0-7 */
+ } else if (rf_pwr_diff >= 1) {
+ /* Prevent overflow */
+ if (rfa_pwr[i] > rfa_upper_bound)
+ rfa_pwr[i] = rfa_upper_bound;
+ }
+ }
+
+ }
+
+ writeval = (rfa_pwr[3] << 24) | (rfa_pwr[2] << 16) | (rfa_pwr[1] << 8) |
+ rfa_pwr[0];
+
+ rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval);
+}
+
+void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
+ u8 *p_pwrlevel, u8 chnl)
+{
+ u32 writeval, pwrbase0, pwrbase1;
+ u8 index = 0;
+ u8 finalpwr_idx[4];
+
+ _rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1,
+ &finalpwr_idx[0]);
+ _rtl92s_set_antennadiff(hw, &finalpwr_idx[0]);
+
+ for (index = 0; index < 6; index++) {
+ _rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index,
+ pwrbase0, pwrbase1, &writeval);
+
+ _rtl92s_write_ofdm_powerreg(hw, index, writeval);
+ }
+}
+
+void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 txagc = 0;
+ bool dont_inc_cck_or_turboscanoff = false;
+
+ if (((rtlefuse->eeprom_version >= 2) &&
+ (rtlefuse->txpwr_safetyflag == 1)) ||
+ ((rtlefuse->eeprom_version >= 2) &&
+ (rtlefuse->eeprom_regulatory != 0)))
+ dont_inc_cck_or_turboscanoff = true;
+
+ if (mac->act_scanning == true) {
+ txagc = 0x3f;
+ if (dont_inc_cck_or_turboscanoff)
+ txagc = pwrlevel;
+ } else {
+ txagc = pwrlevel;
+
+ if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TX_HIGH_PWR_LEVEL_LEVEL1)
+ txagc = 0x10;
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TX_HIGH_PWR_LEVEL_LEVEL2)
+ txagc = 0x0;
+ }
+
+ if (txagc > RF6052_MAX_TX_PWR)
+ txagc = RF6052_MAX_TX_PWR;
+
+ rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc);
+
+}
+
+bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 u4reg_val = 0;
+ u8 rfpath;
+ bool rtstatus = true;
+ struct bb_reg_def *pphyreg;
+
+ /* Initialize RF */
+ for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+
+ pphyreg = &rtlphy->phyreg_def[rfpath];
+
+ /* Store original RFENV control type */
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ u4reg_val = rtl92s_phy_query_bb_reg(hw,
+ pphyreg->rfintfs,
+ BRFSI_RFENV);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ u4reg_val = rtl92s_phy_query_bb_reg(hw,
+ pphyreg->rfintfs,
+ BRFSI_RFENV << 16);
+ break;
+ }
+
+ /* Set RF_ENV enable */
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe,
+ BRFSI_RFENV << 16, 0x1);
+
+ /* Set RF_ENV output high */
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+
+ /* Set bit number of Address and Data for RF register */
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
+ B3WIRE_ADDRESSLENGTH, 0x0);
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
+ B3WIRE_DATALENGTH, 0x0);
+
+ /* Initialize RF fom connfiguration file */
+ switch (rfpath) {
+ case RF90_PATH_A:
+ rtstatus = rtl92s_phy_config_rf(hw,
+ (enum radio_path)rfpath);
+ break;
+ case RF90_PATH_B:
+ rtstatus = rtl92s_phy_config_rf(hw,
+ (enum radio_path)rfpath);
+ break;
+ case RF90_PATH_C:
+ break;
+ case RF90_PATH_D:
+ break;
+ }
+
+ /* Restore RFENV control type */
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV,
+ u4reg_val);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV << 16,
+ u4reg_val);
+ break;
+ }
+
+ if (rtstatus != true) {
+ printk(KERN_ERR "Radio[%d] Fail!!", rfpath);
+ goto fail;
+ }
+
+ }
+
+ return rtstatus;
+
+fail:
+ return rtstatus;
+}
+
+void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ switch (bandwidth) {
+ case HT_CHANNEL_WIDTH_20:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff) | 0x0400);
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff));
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n",
+ bandwidth));
+ break;
+ }
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.h b/drivers/net/wireless/rtlwifi/rtl8192se/rf.h
new file mode 100644
index 0000000..3843baa
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __INC_RTL92S_RF_H
+#define __INC_RTL92S_RF_H
+
+#define RF6052_MAX_TX_PWR 0x3F
+
+void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+ u8 bandwidth);
+bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw) ;
+void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw,
+ u8 powerlevel);
+void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
+ u8 *p_pwrlevel, u8 chnl);
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
new file mode 100644
index 0000000..1c6cb1d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -0,0 +1,423 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include <linux/vmalloc.h>
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+
+static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ /*close ASPM for AMD defaultly */
+ rtlpci->const_amdpci_aspm = 0;
+
+ /*
+ * ASPM PS mode.
+ * 0 - Disable ASPM,
+ * 1 - Enable ASPM without Clock Req,
+ * 2 - Enable ASPM with Clock Req,
+ * 3 - Alwyas Enable ASPM with Clock Req,
+ * 4 - Always Enable ASPM without Clock Req.
+ * set defult to RTL8192CE:3 RTL8192E:2
+ * */
+ rtlpci->const_pci_aspm = 2;
+
+ /*Setting for PCI-E device */
+ rtlpci->const_devicepci_aspm_setting = 0x03;
+
+ /*Setting for PCI-E bridge */
+ rtlpci->const_hostpci_aspm_setting = 0x02;
+
+ /*
+ * In Hw/Sw Radio Off situation.
+ * 0 - Default,
+ * 1 - From ASPM setting without low Mac Pwr,
+ * 2 - From ASPM setting with low Mac Pwr,
+ * 3 - Bus D3
+ * set default to RTL8192CE:0 RTL8192SE:2
+ */
+ rtlpci->const_hwsw_rfoff_d3 = 2;
+
+ /*
+ * This setting works for those device with
+ * backdoor ASPM setting such as EPHY setting.
+ * 0 - Not support ASPM,
+ * 1 - Support ASPM,
+ * 2 - According to chipset.
+ */
+ rtlpci->const_support_pciaspm = 2;
+}
+
+static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ const struct firmware *firmware;
+ struct rt_firmware *pfirmware = NULL;
+ int err = 0;
+ u16 earlyrxthreshold = 7;
+
+ rtlpriv->dm.dm_initialgain_enable = 1;
+ rtlpriv->dm.dm_flag = 0;
+ rtlpriv->dm.disable_framebursting = 0;
+ rtlpriv->dm.thermalvalue = 0;
+ rtlpriv->dm.useramask = true;
+
+ /* compatible 5G band 91se just 2.4G band & smsp */
+ rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+ rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
+ rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+ rtlpci->transmit_config = 0;
+
+ rtlpci->receive_config =
+ RCR_APPFCS |
+ RCR_APWRMGT |
+ /*RCR_ADD3 |*/
+ RCR_AMF |
+ RCR_ADF |
+ RCR_APP_MIC |
+ RCR_APP_ICV |
+ RCR_AICV |
+ /* Accept ICV error, CRC32 Error */
+ RCR_ACRC32 |
+ RCR_AB |
+ /* Accept Broadcast, Multicast */
+ RCR_AM |
+ /* Accept Physical match */
+ RCR_APM |
+ /* Accept Destination Address packets */
+ /*RCR_AAP |*/
+ RCR_APP_PHYST_STAFF |
+ /* Accept PHY status */
+ RCR_APP_PHYST_RXFF |
+ (earlyrxthreshold << RCR_FIFO_OFFSET);
+
+ rtlpci->irq_mask[0] = (u32)
+ (IMR_ROK |
+ IMR_VODOK |
+ IMR_VIDOK |
+ IMR_BEDOK |
+ IMR_BKDOK |
+ IMR_HCCADOK |
+ IMR_MGNTDOK |
+ IMR_COMDOK |
+ IMR_HIGHDOK |
+ IMR_BDOK |
+ IMR_RXCMDOK |
+ /*IMR_TIMEOUT0 |*/
+ IMR_RDU |
+ IMR_RXFOVW |
+ IMR_BCNINT
+ /*| IMR_TXFOVW*/
+ /*| IMR_TBDOK |
+ IMR_TBDER*/);
+
+ rtlpci->irq_mask[1] = (u32) 0;
+
+ rtlpci->shortretry_limit = 0x30;
+ rtlpci->longretry_limit = 0x30;
+
+ rtlpci->first_init = true;
+
+ /* for LPS & IPS */
+ rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+ rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+ rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+ rtlpriv->psc.reg_fwctrl_lps = 3;
+ rtlpriv->psc.reg_max_lps_awakeintvl = 5;
+ /* for ASPM, you can close aspm through
+ * set const_support_pciaspm = 0 */
+ rtl92s_init_aspm_vars(hw);
+
+ if (rtlpriv->psc.reg_fwctrl_lps == 1)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+ else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+ else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+ rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+ /* for firmware buf */
+ rtlpriv->rtlhal.pfirmware = vzalloc(sizeof(struct rt_firmware));
+ if (!rtlpriv->rtlhal.pfirmware) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Can't alloc buffer for fw.\n"));
+ return 1;
+ }
+
+ printk(KERN_INFO "rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE\n"
+ " Loading firmware %s\n", rtlpriv->cfg->fw_name);
+ /* request fw */
+ err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
+ rtlpriv->io.dev);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Failed to request firmware!\n"));
+ return 1;
+ }
+ if (firmware->size > sizeof(struct rt_firmware)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Firmware is too big!\n"));
+ release_firmware(firmware);
+ return 1;
+ }
+
+ pfirmware = (struct rt_firmware *)rtlpriv->rtlhal.pfirmware;
+ memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
+ pfirmware->sz_fw_tmpbufferlen = firmware->size;
+ release_firmware(firmware);
+
+ return err;
+}
+
+static void rtl92s_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->rtlhal.pfirmware) {
+ vfree(rtlpriv->rtlhal.pfirmware);
+ rtlpriv->rtlhal.pfirmware = NULL;
+ }
+}
+
+static struct rtl_hal_ops rtl8192se_hal_ops = {
+ .init_sw_vars = rtl92s_init_sw_vars,
+ .deinit_sw_vars = rtl92s_deinit_sw_vars,
+ .read_eeprom_info = rtl92se_read_eeprom_info,
+ .interrupt_recognized = rtl92se_interrupt_recognized,
+ .hw_init = rtl92se_hw_init,
+ .hw_disable = rtl92se_card_disable,
+ .hw_suspend = rtl92se_suspend,
+ .hw_resume = rtl92se_resume,
+ .enable_interrupt = rtl92se_enable_interrupt,
+ .disable_interrupt = rtl92se_disable_interrupt,
+ .set_network_type = rtl92se_set_network_type,
+ .set_chk_bssid = rtl92se_set_check_bssid,
+ .set_qos = rtl92se_set_qos,
+ .set_bcn_reg = rtl92se_set_beacon_related_registers,
+ .set_bcn_intv = rtl92se_set_beacon_interval,
+ .update_interrupt_mask = rtl92se_update_interrupt_mask,
+ .get_hw_reg = rtl92se_get_hw_reg,
+ .set_hw_reg = rtl92se_set_hw_reg,
+ .update_rate_tbl = rtl92se_update_hal_rate_tbl,
+ .fill_tx_desc = rtl92se_tx_fill_desc,
+ .fill_tx_cmddesc = rtl92se_tx_fill_cmddesc,
+ .query_rx_desc = rtl92se_rx_query_desc,
+ .set_channel_access = rtl92se_update_channel_access_setting,
+ .radio_onoff_checking = rtl92se_gpio_radio_on_off_checking,
+ .set_bw_mode = rtl92s_phy_set_bw_mode,
+ .switch_channel = rtl92s_phy_sw_chnl,
+ .dm_watchdog = rtl92s_dm_watchdog,
+ .scan_operation_backup = rtl92s_phy_scan_operation_backup,
+ .set_rf_power_state = rtl92s_phy_set_rf_power_state,
+ .led_control = rtl92se_led_control,
+ .set_desc = rtl92se_set_desc,
+ .get_desc = rtl92se_get_desc,
+ .tx_polling = rtl92se_tx_polling,
+ .enable_hw_sec = rtl92se_enable_hw_security_config,
+ .set_key = rtl92se_set_key,
+ .init_sw_leds = rtl92se_init_sw_leds,
+ .get_bbreg = rtl92s_phy_query_bb_reg,
+ .set_bbreg = rtl92s_phy_set_bb_reg,
+ .get_rfreg = rtl92s_phy_query_rf_reg,
+ .set_rfreg = rtl92s_phy_set_rf_reg,
+};
+
+static struct rtl_mod_params rtl92se_mod_params = {
+ .sw_crypto = false,
+ .inactiveps = true,
+ .swctrl_lps = true,
+ .fwctrl_lps = false,
+};
+
+/* Because memory R/W bursting will cause system hang/crash
+ * for 92se, so we don't read back after every write action */
+static struct rtl_hal_cfg rtl92se_hal_cfg = {
+ .bar_id = 1,
+ .write_readback = false,
+ .name = "rtl92s_pci",
+ .fw_name = "rtlwifi/rtl8192sefw.bin",
+ .ops = &rtl8192se_hal_ops,
+ .mod_params = &rtl92se_mod_params,
+
+ .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+ .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+ .maps[SYS_CLK] = SYS_CLKR,
+ .maps[MAC_RCR_AM] = RCR_AM,
+ .maps[MAC_RCR_AB] = RCR_AB,
+ .maps[MAC_RCR_ACRC32] = RCR_ACRC32,
+ .maps[MAC_RCR_ACF] = RCR_ACF,
+ .maps[MAC_RCR_AAP] = RCR_AAP,
+
+ .maps[EFUSE_TEST] = REG_EFUSE_TEST,
+ .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+ .maps[EFUSE_CLK] = REG_EFUSE_CLK,
+ .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+ .maps[EFUSE_PWC_EV12V] = 0, /* nouse for 8192se */
+ .maps[EFUSE_FEN_ELDR] = 0, /* nouse for 8192se */
+ .maps[EFUSE_LOADER_CLK_EN] = 0,/* nouse for 8192se */
+ .maps[EFUSE_ANA8M] = EFUSE_ANA8M,
+ .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE_92S,
+ .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+ .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+
+ .maps[RWCAM] = REG_RWCAM,
+ .maps[WCAMI] = REG_WCAMI,
+ .maps[RCAMO] = REG_RCAMO,
+ .maps[CAMDBG] = REG_CAMDBG,
+ .maps[SECR] = REG_SECR,
+ .maps[SEC_CAM_NONE] = CAM_NONE,
+ .maps[SEC_CAM_WEP40] = CAM_WEP40,
+ .maps[SEC_CAM_TKIP] = CAM_TKIP,
+ .maps[SEC_CAM_AES] = CAM_AES,
+ .maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+ .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+ .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+ .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+ .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+ .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+ .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+ .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
+ .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+ .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+ .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+ .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+ .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+ .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+ .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+ .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
+ .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
+
+ .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+ .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+ .maps[RTL_IMR_BcnInt] = IMR_BCNINT,
+ .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+ .maps[RTL_IMR_RDU] = IMR_RDU,
+ .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+ .maps[RTL_IMR_BDOK] = IMR_BDOK,
+ .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+ .maps[RTL_IMR_TBDER] = IMR_TBDER,
+ .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+ .maps[RTL_IMR_COMDOK] = IMR_COMDOK,
+ .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+ .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+ .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+ .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+ .maps[RTL_IMR_VODOK] = IMR_VODOK,
+ .maps[RTL_IMR_ROK] = IMR_ROK,
+ .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
+
+ .maps[RTL_RC_CCK_RATE1M] = DESC92S_RATE1M,
+ .maps[RTL_RC_CCK_RATE2M] = DESC92S_RATE2M,
+ .maps[RTL_RC_CCK_RATE5_5M] = DESC92S_RATE5_5M,
+ .maps[RTL_RC_CCK_RATE11M] = DESC92S_RATE11M,
+ .maps[RTL_RC_OFDM_RATE6M] = DESC92S_RATE6M,
+ .maps[RTL_RC_OFDM_RATE9M] = DESC92S_RATE9M,
+ .maps[RTL_RC_OFDM_RATE12M] = DESC92S_RATE12M,
+ .maps[RTL_RC_OFDM_RATE18M] = DESC92S_RATE18M,
+ .maps[RTL_RC_OFDM_RATE24M] = DESC92S_RATE24M,
+ .maps[RTL_RC_OFDM_RATE36M] = DESC92S_RATE36M,
+ .maps[RTL_RC_OFDM_RATE48M] = DESC92S_RATE48M,
+ .maps[RTL_RC_OFDM_RATE54M] = DESC92S_RATE54M,
+
+ .maps[RTL_RC_HT_RATEMCS7] = DESC92S_RATEMCS7,
+ .maps[RTL_RC_HT_RATEMCS15] = DESC92S_RATEMCS15,
+};
+
+static struct pci_device_id rtl92se_pci_ids[] __devinitdata = {
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8192, rtl92se_hal_cfg)},
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8171, rtl92se_hal_cfg)},
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8172, rtl92se_hal_cfg)},
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8173, rtl92se_hal_cfg)},
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8174, rtl92se_hal_cfg)},
+ {},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl92se_pci_ids);
+
+MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n PCI wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8192sefw.bin");
+
+module_param_named(swenc, rtl92se_mod_params.sw_crypto, bool, 0444);
+module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444);
+module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444);
+MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
+MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
+MODULE_PARM_DESC(swlps, "using linked sw control power save (default 1 is "
+ "open)\n");
+
+
+static struct pci_driver rtl92se_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtl92se_pci_ids,
+ .probe = rtl_pci_probe,
+ .remove = rtl_pci_disconnect,
+
+#ifdef CONFIG_PM
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+#endif
+
+};
+
+static int __init rtl92se_module_init(void)
+{
+ int ret = 0;
+
+ ret = pci_register_driver(&rtl92se_driver);
+ if (ret)
+ RT_ASSERT(false, (": No device found\n"));
+
+ return ret;
+}
+
+static void __exit rtl92se_module_exit(void)
+{
+ pci_unregister_driver(&rtl92se_driver);
+}
+
+module_init(rtl92se_module_init);
+module_exit(rtl92se_module_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.h b/drivers/net/wireless/rtlwifi/rtl8192se/sw.h
similarity index 68%
rename from drivers/net/wireless/iwlwifi/iwl-agn-led.h
rename to drivers/net/wireless/rtlwifi/rtl8192se/sw.h
index 96f323d..fc4eb28 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-led.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ * Copyright(c) 2009-2010 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -19,15 +19,18 @@
* file called LICENSE.
*
* Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
*
*****************************************************************************/
+#ifndef __REALTEK_PCI92SE_SW_H__
+#define __REALTEK_PCI92SE_SW_H__
-#ifndef __iwl_agn_led_h__
-#define __iwl_agn_led_h__
+#define EFUSE_MAX_SECTION 16
-extern const struct iwl_led_ops iwlagn_led_ops;
-void iwlagn_led_enable(struct iwl_priv *priv);
+int rtl92se_init_sw(struct ieee80211_hw *hw);
+void rtl92se_deinit_sw(struct ieee80211_hw *hw);
+void rtl92se_init_var_map(struct ieee80211_hw *hw);
-#endif /* __iwl_agn_led_h__ */
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/table.c b/drivers/net/wireless/rtlwifi/rtl8192se/table.c
new file mode 100644
index 0000000..154185b
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/table.c
@@ -0,0 +1,634 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Created on 2010/ 5/18, 1:41
+ *****************************************************************************/
+
+#include "table.h"
+
+u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH] = {
+ 0x01c, 0x07000000,
+ 0x800, 0x00040000,
+ 0x804, 0x00008003,
+ 0x808, 0x0000fc00,
+ 0x80c, 0x0000000a,
+ 0x810, 0x10005088,
+ 0x814, 0x020c3d10,
+ 0x818, 0x00200185,
+ 0x81c, 0x00000000,
+ 0x820, 0x01000000,
+ 0x824, 0x00390004,
+ 0x828, 0x01000000,
+ 0x82c, 0x00390004,
+ 0x830, 0x00000004,
+ 0x834, 0x00690200,
+ 0x838, 0x00000004,
+ 0x83c, 0x00690200,
+ 0x840, 0x00010000,
+ 0x844, 0x00010000,
+ 0x848, 0x00000000,
+ 0x84c, 0x00000000,
+ 0x850, 0x00000000,
+ 0x854, 0x00000000,
+ 0x858, 0x48484848,
+ 0x85c, 0x65a965a9,
+ 0x860, 0x0f7f0130,
+ 0x864, 0x0f7f0130,
+ 0x868, 0x0f7f0130,
+ 0x86c, 0x0f7f0130,
+ 0x870, 0x03000700,
+ 0x874, 0x03000300,
+ 0x878, 0x00020002,
+ 0x87c, 0x004f0201,
+ 0x880, 0xa8300ac1,
+ 0x884, 0x00000058,
+ 0x888, 0x00000008,
+ 0x88c, 0x00000004,
+ 0x890, 0x00000000,
+ 0x894, 0xfffffffe,
+ 0x898, 0x40302010,
+ 0x89c, 0x00706050,
+ 0x8b0, 0x00000000,
+ 0x8e0, 0x00000000,
+ 0x8e4, 0x00000000,
+ 0xe00, 0x30333333,
+ 0xe04, 0x2a2d2e2f,
+ 0xe08, 0x00003232,
+ 0xe10, 0x30333333,
+ 0xe14, 0x2a2d2e2f,
+ 0xe18, 0x30333333,
+ 0xe1c, 0x2a2d2e2f,
+ 0xe30, 0x01007c00,
+ 0xe34, 0x01004800,
+ 0xe38, 0x1000dc1f,
+ 0xe3c, 0x10008c1f,
+ 0xe40, 0x021400a0,
+ 0xe44, 0x281600a0,
+ 0xe48, 0xf8000001,
+ 0xe4c, 0x00002910,
+ 0xe50, 0x01007c00,
+ 0xe54, 0x01004800,
+ 0xe58, 0x1000dc1f,
+ 0xe5c, 0x10008c1f,
+ 0xe60, 0x021400a0,
+ 0xe64, 0x281600a0,
+ 0xe6c, 0x00002910,
+ 0xe70, 0x31ed92fb,
+ 0xe74, 0x361536fb,
+ 0xe78, 0x361536fb,
+ 0xe7c, 0x361536fb,
+ 0xe80, 0x361536fb,
+ 0xe84, 0x000d92fb,
+ 0xe88, 0x000d92fb,
+ 0xe8c, 0x31ed92fb,
+ 0xed0, 0x31ed92fb,
+ 0xed4, 0x31ed92fb,
+ 0xed8, 0x000d92fb,
+ 0xedc, 0x000d92fb,
+ 0xee0, 0x000d92fb,
+ 0xee4, 0x015e5448,
+ 0xee8, 0x21555448,
+ 0x900, 0x00000000,
+ 0x904, 0x00000023,
+ 0x908, 0x00000000,
+ 0x90c, 0x01121313,
+ 0xa00, 0x00d047c8,
+ 0xa04, 0x80ff0008,
+ 0xa08, 0x8ccd8300,
+ 0xa0c, 0x2e62120f,
+ 0xa10, 0x9500bb78,
+ 0xa14, 0x11144028,
+ 0xa18, 0x00881117,
+ 0xa1c, 0x89140f00,
+ 0xa20, 0x1a1b0000,
+ 0xa24, 0x090e1317,
+ 0xa28, 0x00000204,
+ 0xa2c, 0x10d30000,
+ 0xc00, 0x40071d40,
+ 0xc04, 0x00a05633,
+ 0xc08, 0x000000e4,
+ 0xc0c, 0x6c6c6c6c,
+ 0xc10, 0x08800000,
+ 0xc14, 0x40000100,
+ 0xc18, 0x08000000,
+ 0xc1c, 0x40000100,
+ 0xc20, 0x08000000,
+ 0xc24, 0x40000100,
+ 0xc28, 0x08000000,
+ 0xc2c, 0x40000100,
+ 0xc30, 0x6de9ac44,
+ 0xc34, 0x469652cf,
+ 0xc38, 0x49795994,
+ 0xc3c, 0x0a979764,
+ 0xc40, 0x1f7c403f,
+ 0xc44, 0x000100b7,
+ 0xc48, 0xec020000,
+ 0xc4c, 0x007f037f,
+ 0xc50, 0x69543420,
+ 0xc54, 0x433c0094,
+ 0xc58, 0x69543420,
+ 0xc5c, 0x433c0094,
+ 0xc60, 0x69543420,
+ 0xc64, 0x433c0094,
+ 0xc68, 0x69543420,
+ 0xc6c, 0x433c0094,
+ 0xc70, 0x2c7f000d,
+ 0xc74, 0x0186155b,
+ 0xc78, 0x0000001f,
+ 0xc7c, 0x00b91612,
+ 0xc80, 0x40000100,
+ 0xc84, 0x20f60000,
+ 0xc88, 0x20000080,
+ 0xc8c, 0x20200000,
+ 0xc90, 0x40000100,
+ 0xc94, 0x00000000,
+ 0xc98, 0x40000100,
+ 0xc9c, 0x00000000,
+ 0xca0, 0x00492492,
+ 0xca4, 0x00000000,
+ 0xca8, 0x00000000,
+ 0xcac, 0x00000000,
+ 0xcb0, 0x00000000,
+ 0xcb4, 0x00000000,
+ 0xcb8, 0x00000000,
+ 0xcbc, 0x28000000,
+ 0xcc0, 0x00000000,
+ 0xcc4, 0x00000000,
+ 0xcc8, 0x00000000,
+ 0xccc, 0x00000000,
+ 0xcd0, 0x00000000,
+ 0xcd4, 0x00000000,
+ 0xcd8, 0x64b22427,
+ 0xcdc, 0x00766932,
+ 0xce0, 0x00222222,
+ 0xce4, 0x00000000,
+ 0xce8, 0x37644302,
+ 0xcec, 0x2f97d40c,
+ 0xd00, 0x00000750,
+ 0xd04, 0x00000403,
+ 0xd08, 0x0000907f,
+ 0xd0c, 0x00000001,
+ 0xd10, 0xa0633333,
+ 0xd14, 0x33333c63,
+ 0xd18, 0x6a8f5b6b,
+ 0xd1c, 0x00000000,
+ 0xd20, 0x00000000,
+ 0xd24, 0x00000000,
+ 0xd28, 0x00000000,
+ 0xd2c, 0xcc979975,
+ 0xd30, 0x00000000,
+ 0xd34, 0x00000000,
+ 0xd38, 0x00000000,
+ 0xd3c, 0x00027293,
+ 0xd40, 0x00000000,
+ 0xd44, 0x00000000,
+ 0xd48, 0x00000000,
+ 0xd50, 0x6437140a,
+ 0xd54, 0x024dbd02,
+ 0xd58, 0x00000000,
+ 0xd5c, 0x30032064,
+ 0xd60, 0x4653de68,
+ 0xd64, 0x00518a3c,
+ 0xd68, 0x00002101,
+ 0xf14, 0x00000003,
+ 0xf4c, 0x00000000,
+ 0xf00, 0x00000300,
+};
+
+u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH] = {
+ 0x844, 0xffffffff, 0x00010000,
+ 0x804, 0x0000000f, 0x00000001,
+ 0x824, 0x00f0000f, 0x00300004,
+ 0x82c, 0x00f0000f, 0x00100002,
+ 0x870, 0x04000000, 0x00000001,
+ 0x864, 0x00000400, 0x00000000,
+ 0x878, 0x000f000f, 0x00000002,
+ 0xe74, 0x0f000000, 0x00000002,
+ 0xe78, 0x0f000000, 0x00000002,
+ 0xe7c, 0x0f000000, 0x00000002,
+ 0xe80, 0x0f000000, 0x00000002,
+ 0x90c, 0x000000ff, 0x00000011,
+ 0xc04, 0x000000ff, 0x00000011,
+ 0xd04, 0x0000000f, 0x00000001,
+ 0x1f4, 0xffff0000, 0x00007777,
+ 0x234, 0xf8000000, 0x0000000a,
+};
+
+u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH] = {
+ 0x804, 0x0000000f, 0x00000003,
+ 0x824, 0x00f0000f, 0x00300004,
+ 0x82c, 0x00f0000f, 0x00300002,
+ 0x870, 0x04000000, 0x00000001,
+ 0x864, 0x00000400, 0x00000000,
+ 0x878, 0x000f000f, 0x00000002,
+ 0xe74, 0x0f000000, 0x00000002,
+ 0xe78, 0x0f000000, 0x00000002,
+ 0xe7c, 0x0f000000, 0x00000002,
+ 0xe80, 0x0f000000, 0x00000002,
+ 0x90c, 0x000000ff, 0x00000011,
+ 0xc04, 0x000000ff, 0x00000033,
+ 0xd04, 0x0000000f, 0x00000003,
+ 0x1f4, 0xffff0000, 0x00007777,
+ 0x234, 0xf8000000, 0x0000000a,
+};
+
+u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH] = {
+ 0xe00, 0xffffffff, 0x06090909,
+ 0xe04, 0xffffffff, 0x00030406,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x0a0c0d0e,
+ 0xe14, 0xffffffff, 0x04070809,
+ 0xe18, 0xffffffff, 0x0a0c0d0e,
+ 0xe1c, 0xffffffff, 0x04070809,
+ 0xe00, 0xffffffff, 0x04040404,
+ 0xe04, 0xffffffff, 0x00020204,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x02040404,
+ 0xe14, 0xffffffff, 0x00000002,
+ 0xe18, 0xffffffff, 0x02040404,
+ 0xe1c, 0xffffffff, 0x00000002,
+ 0xe00, 0xffffffff, 0x04040404,
+ 0xe04, 0xffffffff, 0x00020204,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x02040404,
+ 0xe14, 0xffffffff, 0x00000002,
+ 0xe18, 0xffffffff, 0x02040404,
+ 0xe1c, 0xffffffff, 0x00000002,
+ 0xe00, 0xffffffff, 0x02020202,
+ 0xe04, 0xffffffff, 0x00020202,
+ 0xe08, 0x0000ff00, 0x00000000,
+ 0xe10, 0xffffffff, 0x02020202,
+ 0xe14, 0xffffffff, 0x00000002,
+ 0xe18, 0xffffffff, 0x02020202,
+ 0xe1c, 0xffffffff, 0x00000002,
+};
+
+u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH] = {
+ 0x000, 0x00030159,
+ 0x001, 0x00030250,
+ 0x002, 0x00010000,
+ 0x010, 0x0008000f,
+ 0x011, 0x000231fc,
+ 0x010, 0x000c000f,
+ 0x011, 0x0003f9f8,
+ 0x010, 0x0002000f,
+ 0x011, 0x00020101,
+ 0x014, 0x0001093e,
+ 0x014, 0x0009093e,
+ 0x015, 0x0000f8f4,
+ 0x017, 0x000f6500,
+ 0x01a, 0x00013056,
+ 0x01b, 0x00060000,
+ 0x01c, 0x00000300,
+ 0x01e, 0x00031059,
+ 0x021, 0x00054000,
+ 0x022, 0x0000083c,
+ 0x023, 0x00001558,
+ 0x024, 0x00000060,
+ 0x025, 0x00022583,
+ 0x026, 0x0000f200,
+ 0x027, 0x000eacf1,
+ 0x028, 0x0009bd54,
+ 0x029, 0x00004582,
+ 0x02a, 0x00000001,
+ 0x02b, 0x00021334,
+ 0x02a, 0x00000000,
+ 0x02b, 0x0000000a,
+ 0x02a, 0x00000001,
+ 0x02b, 0x00000808,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000c,
+ 0x02a, 0x00000002,
+ 0x02b, 0x00000808,
+ 0x02b, 0x0005b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000003,
+ 0x02b, 0x00000808,
+ 0x02b, 0x00063333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000004,
+ 0x02b, 0x00000808,
+ 0x02b, 0x0006b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000005,
+ 0x02b, 0x00000709,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000006,
+ 0x02b, 0x00000709,
+ 0x02b, 0x0005b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000007,
+ 0x02b, 0x00000709,
+ 0x02b, 0x00063333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000008,
+ 0x02b, 0x00000709,
+ 0x02b, 0x0006b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x00000009,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000a,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x0005b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000b,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x00063333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000c,
+ 0x02b, 0x0000060a,
+ 0x02b, 0x0006b333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000d,
+ 0x02b, 0x0000050b,
+ 0x02b, 0x00053333,
+ 0x02c, 0x0000000d,
+ 0x02a, 0x0000000e,
+ 0x02b, 0x0000050b,
+ 0x02b, 0x00066623,
+ 0x02c, 0x0000001a,
+ 0x02a, 0x000e4000,
+ 0x030, 0x00020000,
+ 0x031, 0x000b9631,
+ 0x032, 0x0000130d,
+ 0x033, 0x00000187,
+ 0x013, 0x00019e6c,
+ 0x013, 0x00015e94,
+ 0x000, 0x00010159,
+ 0x018, 0x0000f401,
+ 0x0fe, 0x00000000,
+ 0x01e, 0x0003105b,
+ 0x0fe, 0x00000000,
+ 0x000, 0x00030159,
+ 0x010, 0x0004000f,
+ 0x011, 0x000203f9,
+};
+
+u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH] = {
+ 0x000, 0x00030159,
+ 0x001, 0x00001041,
+ 0x002, 0x00011000,
+ 0x005, 0x00080fc0,
+ 0x007, 0x000fc803,
+ 0x013, 0x00017cb0,
+ 0x013, 0x00011cc0,
+ 0x013, 0x0000dc60,
+ 0x013, 0x00008c60,
+ 0x013, 0x00004450,
+ 0x013, 0x00000020,
+};
+
+u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH] = {
+ 0x000, 0x00030159,
+ 0x001, 0x00001041,
+ 0x002, 0x00011000,
+ 0x005, 0x00080fc0,
+ 0x007, 0x000fc803,
+};
+
+u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH] = {
+ 0x020, 0x00000035,
+ 0x048, 0x0000000e,
+ 0x049, 0x000000f0,
+ 0x04a, 0x00000077,
+ 0x04b, 0x00000083,
+ 0x0b5, 0x00000021,
+ 0x0dc, 0x000000ff,
+ 0x0dd, 0x000000ff,
+ 0x0de, 0x000000ff,
+ 0x0df, 0x000000ff,
+ 0x116, 0x00000000,
+ 0x117, 0x00000000,
+ 0x118, 0x00000000,
+ 0x119, 0x00000000,
+ 0x11a, 0x00000000,
+ 0x11b, 0x00000000,
+ 0x11c, 0x00000000,
+ 0x11d, 0x00000000,
+ 0x160, 0x0000000b,
+ 0x161, 0x0000000b,
+ 0x162, 0x0000000b,
+ 0x163, 0x0000000b,
+ 0x164, 0x0000000b,
+ 0x165, 0x0000000b,
+ 0x166, 0x0000000b,
+ 0x167, 0x0000000b,
+ 0x168, 0x0000000b,
+ 0x169, 0x0000000b,
+ 0x16a, 0x0000000b,
+ 0x16b, 0x0000000b,
+ 0x16c, 0x0000000b,
+ 0x16d, 0x0000000b,
+ 0x16e, 0x0000000b,
+ 0x16f, 0x0000000b,
+ 0x170, 0x0000000b,
+ 0x171, 0x0000000b,
+ 0x172, 0x0000000b,
+ 0x173, 0x0000000b,
+ 0x174, 0x0000000b,
+ 0x175, 0x0000000b,
+ 0x176, 0x0000000b,
+ 0x177, 0x0000000b,
+ 0x178, 0x0000000b,
+ 0x179, 0x0000000b,
+ 0x17a, 0x0000000b,
+ 0x17b, 0x0000000b,
+ 0x17c, 0x0000000b,
+ 0x17d, 0x0000000b,
+ 0x17e, 0x0000000b,
+ 0x17f, 0x0000000b,
+ 0x236, 0x0000000c,
+ 0x503, 0x00000022,
+ 0x560, 0x00000000,
+};
+
+u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH] = {
+ 0xc78, 0x7f000001,
+ 0xc78, 0x7f010001,
+ 0xc78, 0x7e020001,
+ 0xc78, 0x7d030001,
+ 0xc78, 0x7c040001,
+ 0xc78, 0x7b050001,
+ 0xc78, 0x7a060001,
+ 0xc78, 0x79070001,
+ 0xc78, 0x78080001,
+ 0xc78, 0x77090001,
+ 0xc78, 0x760a0001,
+ 0xc78, 0x750b0001,
+ 0xc78, 0x740c0001,
+ 0xc78, 0x730d0001,
+ 0xc78, 0x720e0001,
+ 0xc78, 0x710f0001,
+ 0xc78, 0x70100001,
+ 0xc78, 0x6f110001,
+ 0xc78, 0x6f120001,
+ 0xc78, 0x6e130001,
+ 0xc78, 0x6d140001,
+ 0xc78, 0x6d150001,
+ 0xc78, 0x6c160001,
+ 0xc78, 0x6b170001,
+ 0xc78, 0x6a180001,
+ 0xc78, 0x6a190001,
+ 0xc78, 0x691a0001,
+ 0xc78, 0x681b0001,
+ 0xc78, 0x671c0001,
+ 0xc78, 0x661d0001,
+ 0xc78, 0x651e0001,
+ 0xc78, 0x641f0001,
+ 0xc78, 0x63200001,
+ 0xc78, 0x4c210001,
+ 0xc78, 0x4b220001,
+ 0xc78, 0x4a230001,
+ 0xc78, 0x49240001,
+ 0xc78, 0x48250001,
+ 0xc78, 0x47260001,
+ 0xc78, 0x46270001,
+ 0xc78, 0x45280001,
+ 0xc78, 0x44290001,
+ 0xc78, 0x2c2a0001,
+ 0xc78, 0x2b2b0001,
+ 0xc78, 0x2a2c0001,
+ 0xc78, 0x292d0001,
+ 0xc78, 0x282e0001,
+ 0xc78, 0x272f0001,
+ 0xc78, 0x26300001,
+ 0xc78, 0x25310001,
+ 0xc78, 0x24320001,
+ 0xc78, 0x23330001,
+ 0xc78, 0x22340001,
+ 0xc78, 0x09350001,
+ 0xc78, 0x08360001,
+ 0xc78, 0x07370001,
+ 0xc78, 0x06380001,
+ 0xc78, 0x05390001,
+ 0xc78, 0x043a0001,
+ 0xc78, 0x033b0001,
+ 0xc78, 0x023c0001,
+ 0xc78, 0x013d0001,
+ 0xc78, 0x003e0001,
+ 0xc78, 0x003f0001,
+ 0xc78, 0x7f400001,
+ 0xc78, 0x7f410001,
+ 0xc78, 0x7e420001,
+ 0xc78, 0x7d430001,
+ 0xc78, 0x7c440001,
+ 0xc78, 0x7b450001,
+ 0xc78, 0x7a460001,
+ 0xc78, 0x79470001,
+ 0xc78, 0x78480001,
+ 0xc78, 0x77490001,
+ 0xc78, 0x764a0001,
+ 0xc78, 0x754b0001,
+ 0xc78, 0x744c0001,
+ 0xc78, 0x734d0001,
+ 0xc78, 0x724e0001,
+ 0xc78, 0x714f0001,
+ 0xc78, 0x70500001,
+ 0xc78, 0x6f510001,
+ 0xc78, 0x6f520001,
+ 0xc78, 0x6e530001,
+ 0xc78, 0x6d540001,
+ 0xc78, 0x6d550001,
+ 0xc78, 0x6c560001,
+ 0xc78, 0x6b570001,
+ 0xc78, 0x6a580001,
+ 0xc78, 0x6a590001,
+ 0xc78, 0x695a0001,
+ 0xc78, 0x685b0001,
+ 0xc78, 0x675c0001,
+ 0xc78, 0x665d0001,
+ 0xc78, 0x655e0001,
+ 0xc78, 0x645f0001,
+ 0xc78, 0x63600001,
+ 0xc78, 0x4c610001,
+ 0xc78, 0x4b620001,
+ 0xc78, 0x4a630001,
+ 0xc78, 0x49640001,
+ 0xc78, 0x48650001,
+ 0xc78, 0x47660001,
+ 0xc78, 0x46670001,
+ 0xc78, 0x45680001,
+ 0xc78, 0x44690001,
+ 0xc78, 0x2c6a0001,
+ 0xc78, 0x2b6b0001,
+ 0xc78, 0x2a6c0001,
+ 0xc78, 0x296d0001,
+ 0xc78, 0x286e0001,
+ 0xc78, 0x276f0001,
+ 0xc78, 0x26700001,
+ 0xc78, 0x25710001,
+ 0xc78, 0x24720001,
+ 0xc78, 0x23730001,
+ 0xc78, 0x22740001,
+ 0xc78, 0x09750001,
+ 0xc78, 0x08760001,
+ 0xc78, 0x07770001,
+ 0xc78, 0x06780001,
+ 0xc78, 0x05790001,
+ 0xc78, 0x047a0001,
+ 0xc78, 0x037b0001,
+ 0xc78, 0x027c0001,
+ 0xc78, 0x017d0001,
+ 0xc78, 0x007e0001,
+ 0xc78, 0x007f0001,
+ 0xc78, 0x3000001e,
+ 0xc78, 0x3001001e,
+ 0xc78, 0x3002001e,
+ 0xc78, 0x3003001e,
+ 0xc78, 0x3004001e,
+ 0xc78, 0x3405001e,
+ 0xc78, 0x3806001e,
+ 0xc78, 0x3e07001e,
+ 0xc78, 0x3e08001e,
+ 0xc78, 0x4409001e,
+ 0xc78, 0x460a001e,
+ 0xc78, 0x480b001e,
+ 0xc78, 0x480c001e,
+ 0xc78, 0x4e0d001e,
+ 0xc78, 0x560e001e,
+ 0xc78, 0x5a0f001e,
+ 0xc78, 0x5e10001e,
+ 0xc78, 0x6211001e,
+ 0xc78, 0x6c12001e,
+ 0xc78, 0x7213001e,
+ 0xc78, 0x7214001e,
+ 0xc78, 0x7215001e,
+ 0xc78, 0x7216001e,
+ 0xc78, 0x7217001e,
+ 0xc78, 0x7218001e,
+ 0xc78, 0x7219001e,
+ 0xc78, 0x721a001e,
+ 0xc78, 0x721b001e,
+ 0xc78, 0x721c001e,
+ 0xc78, 0x721d001e,
+ 0xc78, 0x721e001e,
+ 0xc78, 0x721f001e,
+};
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/table.h b/drivers/net/wireless/rtlwifi/rtl8192se/table.h
new file mode 100644
index 0000000..b4ed6d95
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/table.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8192SE_FW_IMG_H
+#define __INC_HAL8192SE_FW_IMG_H
+
+#include <linux/types.h>
+
+/*Created on 2010/ 4/12, 5:56*/
+
+#define PHY_REG_2T2RARRAYLENGTH 372
+extern u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH];
+#define PHY_CHANGETO_1T1RARRAYLENGTH 48
+extern u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH];
+#define PHY_CHANGETO_1T2RARRAYLENGTH 45
+extern u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH];
+#define PHY_REG_ARRAY_PGLENGTH 84
+extern u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH];
+#define RADIOA_1T_ARRAYLENGTH 202
+extern u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH];
+#define RADIOB_ARRAYLENGTH 22
+extern u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH];
+#define RADIOB_GM_ARRAYLENGTH 10
+extern u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH];
+#define MAC_2T_ARRAYLENGTH 106
+extern u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH];
+#define AGCTAB_ARRAYLENGTH 320
+extern u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH];
+
+#endif
+
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
new file mode 100644
index 0000000..5cf4423
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
@@ -0,0 +1,976 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "fw.h"
+#include "trx.h"
+#include "led.h"
+
+static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 skb_queue)
+{
+ __le16 fc = rtl_get_fc(skb);
+
+ if (unlikely(ieee80211_is_beacon(fc)))
+ return QSLT_BEACON;
+ if (ieee80211_is_mgmt(fc))
+ return QSLT_MGNT;
+ if (ieee80211_is_nullfunc(fc))
+ return QSLT_HIGH;
+
+ return skb->priority;
+}
+
+static int _rtl92se_rate_mapping(bool isht, u8 desc_rate, bool first_ampdu)
+{
+ int rate_idx = 0;
+
+ if (first_ampdu) {
+ if (false == isht) {
+ switch (desc_rate) {
+ case DESC92S_RATE1M:
+ rate_idx = 0;
+ break;
+ case DESC92S_RATE2M:
+ rate_idx = 1;
+ break;
+ case DESC92S_RATE5_5M:
+ rate_idx = 2;
+ break;
+ case DESC92S_RATE11M:
+ rate_idx = 3;
+ break;
+ case DESC92S_RATE6M:
+ rate_idx = 4;
+ break;
+ case DESC92S_RATE9M:
+ rate_idx = 5;
+ break;
+ case DESC92S_RATE12M:
+ rate_idx = 6;
+ break;
+ case DESC92S_RATE18M:
+ rate_idx = 7;
+ break;
+ case DESC92S_RATE24M:
+ rate_idx = 8;
+ break;
+ case DESC92S_RATE36M:
+ rate_idx = 9;
+ break;
+ case DESC92S_RATE48M:
+ rate_idx = 10;
+ break;
+ case DESC92S_RATE54M:
+ rate_idx = 11;
+ break;
+ default:
+ rate_idx = 0;
+ break;
+ }
+ } else {
+ rate_idx = 11;
+ }
+
+ return rate_idx;
+ }
+
+ switch (desc_rate) {
+ case DESC92S_RATE1M:
+ rate_idx = 0;
+ break;
+ case DESC92S_RATE2M:
+ rate_idx = 1;
+ break;
+ case DESC92S_RATE5_5M:
+ rate_idx = 2;
+ break;
+ case DESC92S_RATE11M:
+ rate_idx = 3;
+ break;
+ case DESC92S_RATE6M:
+ rate_idx = 4;
+ break;
+ case DESC92S_RATE9M:
+ rate_idx = 5;
+ break;
+ case DESC92S_RATE12M:
+ rate_idx = 6;
+ break;
+ case DESC92S_RATE18M:
+ rate_idx = 7;
+ break;
+ case DESC92S_RATE24M:
+ rate_idx = 8;
+ break;
+ case DESC92S_RATE36M:
+ rate_idx = 9;
+ break;
+ case DESC92S_RATE48M:
+ rate_idx = 10;
+ break;
+ case DESC92S_RATE54M:
+ rate_idx = 11;
+ break;
+ default:
+ rate_idx = 11;
+ break;
+ }
+ return rate_idx;
+}
+
+static u8 _rtl92s_query_rxpwrpercentage(char antpower)
+{
+ if ((antpower <= -100) || (antpower >= 20))
+ return 0;
+ else if (antpower >= 0)
+ return 100;
+ else
+ return 100 + antpower;
+}
+
+static u8 _rtl92s_evm_db_to_percentage(char value)
+{
+ char ret_val;
+ ret_val = value;
+
+ if (ret_val >= 0)
+ ret_val = 0;
+
+ if (ret_val <= -33)
+ ret_val = -33;
+
+ ret_val = 0 - ret_val;
+ ret_val *= 3;
+
+ if (ret_val == 99)
+ ret_val = 100;
+
+ return ret_val;
+}
+
+static long _rtl92se_translate_todbm(struct ieee80211_hw *hw,
+ u8 signal_strength_index)
+{
+ long signal_power;
+
+ signal_power = (long)((signal_strength_index + 1) >> 1);
+ signal_power -= 95;
+ return signal_power;
+}
+
+static long _rtl92se_signal_scale_mapping(struct ieee80211_hw *hw,
+ long currsig)
+{
+ long retsig = 0;
+
+ /* Step 1. Scale mapping. */
+ if (currsig > 47)
+ retsig = 100;
+ else if (currsig > 14 && currsig <= 47)
+ retsig = 100 - ((47 - currsig) * 3) / 2;
+ else if (currsig > 2 && currsig <= 14)
+ retsig = 48 - ((14 - currsig) * 15) / 7;
+ else if (currsig >= 0)
+ retsig = currsig * 9 + 1;
+
+ return retsig;
+}
+
+
+static void _rtl92se_query_rxphystatus(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats, u8 *pdesc,
+ struct rx_fwinfo *p_drvinfo,
+ bool packet_match_bssid,
+ bool packet_toself,
+ bool packet_beacon)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct phy_sts_cck_8192s_t *cck_buf;
+ s8 rx_pwr_all = 0, rx_pwr[4];
+ u8 rf_rx_num = 0, evm, pwdb_all;
+ u8 i, max_spatial_stream;
+ u32 rssi, total_rssi = 0;
+ bool in_powersavemode = false;
+ bool is_cck_rate;
+
+ is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc);
+ pstats->packet_matchbssid = packet_match_bssid;
+ pstats->packet_toself = packet_toself;
+ pstats->is_cck = is_cck_rate;
+ pstats->packet_beacon = packet_beacon;
+ pstats->is_cck = is_cck_rate;
+ pstats->rx_mimo_signalquality[0] = -1;
+ pstats->rx_mimo_signalquality[1] = -1;
+
+ if (is_cck_rate) {
+ u8 report, cck_highpwr;
+ cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;
+
+ if (!in_powersavemode)
+ cck_highpwr = (u8) rtl_get_bbreg(hw,
+ RFPGA0_XA_HSSIPARAMETER2,
+ 0x200);
+ else
+ cck_highpwr = false;
+
+ if (!cck_highpwr) {
+ u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+ report = cck_buf->cck_agc_rpt & 0xc0;
+ report = report >> 6;
+ switch (report) {
+ case 0x3:
+ rx_pwr_all = -40 - (cck_agc_rpt & 0x3e);
+ break;
+ case 0x2:
+ rx_pwr_all = -20 - (cck_agc_rpt & 0x3e);
+ break;
+ case 0x1:
+ rx_pwr_all = -2 - (cck_agc_rpt & 0x3e);
+ break;
+ case 0x0:
+ rx_pwr_all = 14 - (cck_agc_rpt & 0x3e);
+ break;
+ }
+ } else {
+ u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+ report = p_drvinfo->cfosho[0] & 0x60;
+ report = report >> 5;
+ switch (report) {
+ case 0x3:
+ rx_pwr_all = -40 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ case 0x2:
+ rx_pwr_all = -20 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ case 0x1:
+ rx_pwr_all = -2 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ case 0x0:
+ rx_pwr_all = 14 - ((cck_agc_rpt & 0x1f) << 1);
+ break;
+ }
+ }
+
+ pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all);
+
+ /* CCK gain is smaller than OFDM/MCS gain, */
+ /* so we add gain diff by experiences, the val is 6 */
+ pwdb_all += 6;
+ if (pwdb_all > 100)
+ pwdb_all = 100;
+ /* modify the offset to make the same gain index with OFDM. */
+ if (pwdb_all > 34 && pwdb_all <= 42)
+ pwdb_all -= 2;
+ else if (pwdb_all > 26 && pwdb_all <= 34)
+ pwdb_all -= 6;
+ else if (pwdb_all > 14 && pwdb_all <= 26)
+ pwdb_all -= 8;
+ else if (pwdb_all > 4 && pwdb_all <= 14)
+ pwdb_all -= 4;
+
+ pstats->rx_pwdb_all = pwdb_all;
+ pstats->recvsignalpower = rx_pwr_all;
+
+ if (packet_match_bssid) {
+ u8 sq;
+ if (pstats->rx_pwdb_all > 40) {
+ sq = 100;
+ } else {
+ sq = cck_buf->sq_rpt;
+ if (sq > 64)
+ sq = 0;
+ else if (sq < 20)
+ sq = 100;
+ else
+ sq = ((64 - sq) * 100) / 44;
+ }
+
+ pstats->signalquality = sq;
+ pstats->rx_mimo_signalquality[0] = sq;
+ pstats->rx_mimo_signalquality[1] = -1;
+ }
+ } else {
+ rtlpriv->dm.rfpath_rxenable[0] =
+ rtlpriv->dm.rfpath_rxenable[1] = true;
+ for (i = RF90_PATH_A; i < RF90_PATH_MAX; i++) {
+ if (rtlpriv->dm.rfpath_rxenable[i])
+ rf_rx_num++;
+
+ rx_pwr[i] = ((p_drvinfo->gain_trsw[i] &
+ 0x3f) * 2) - 110;
+ rssi = _rtl92s_query_rxpwrpercentage(rx_pwr[i]);
+ total_rssi += rssi;
+ rtlpriv->stats.rx_snr_db[i] =
+ (long)(p_drvinfo->rxsnr[i] / 2);
+
+ if (packet_match_bssid)
+ pstats->rx_mimo_signalstrength[i] = (u8) rssi;
+ }
+
+ rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110;
+ pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all);
+ pstats->rx_pwdb_all = pwdb_all;
+ pstats->rxpower = rx_pwr_all;
+ pstats->recvsignalpower = rx_pwr_all;
+
+ if (GET_RX_STATUS_DESC_RX_HT(pdesc) &&
+ GET_RX_STATUS_DESC_RX_MCS(pdesc) >= DESC92S_RATEMCS8 &&
+ GET_RX_STATUS_DESC_RX_MCS(pdesc) <= DESC92S_RATEMCS15)
+ max_spatial_stream = 2;
+ else
+ max_spatial_stream = 1;
+
+ for (i = 0; i < max_spatial_stream; i++) {
+ evm = _rtl92s_evm_db_to_percentage(p_drvinfo->rxevm[i]);
+
+ if (packet_match_bssid) {
+ if (i == 0)
+ pstats->signalquality = (u8)(evm &
+ 0xff);
+ pstats->rx_mimo_signalquality[i] =
+ (u8) (evm & 0xff);
+ }
+ }
+ }
+
+ if (is_cck_rate)
+ pstats->signalstrength = (u8)(_rtl92se_signal_scale_mapping(hw,
+ pwdb_all));
+ else if (rf_rx_num != 0)
+ pstats->signalstrength = (u8) (_rtl92se_signal_scale_mapping(hw,
+ total_rssi /= rf_rx_num));
+}
+
+static void _rtl92se_process_ui_rssi(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u8 rfpath;
+ u32 last_rssi, tmpval;
+
+ if (pstats->packet_toself || pstats->packet_beacon) {
+ rtlpriv->stats.rssi_calculate_cnt++;
+
+ if (rtlpriv->stats.ui_rssi.total_num++ >=
+ PHY_RSSI_SLID_WIN_MAX) {
+ rtlpriv->stats.ui_rssi.total_num =
+ PHY_RSSI_SLID_WIN_MAX;
+ last_rssi = rtlpriv->stats.ui_rssi.elements[
+ rtlpriv->stats.ui_rssi.index];
+ rtlpriv->stats.ui_rssi.total_val -= last_rssi;
+ }
+
+ rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength;
+ rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi.index++]
+ = pstats->signalstrength;
+
+ if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX)
+ rtlpriv->stats.ui_rssi.index = 0;
+
+ tmpval = rtlpriv->stats.ui_rssi.total_val /
+ rtlpriv->stats.ui_rssi.total_num;
+ rtlpriv->stats.signal_strength = _rtl92se_translate_todbm(hw,
+ (u8) tmpval);
+ pstats->rssi = rtlpriv->stats.signal_strength;
+ }
+
+ if (!pstats->is_cck && pstats->packet_toself) {
+ for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
+ rfpath++) {
+ if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) {
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ pstats->rx_mimo_signalstrength[rfpath];
+
+ }
+
+ if (pstats->rx_mimo_signalstrength[rfpath] >
+ rtlpriv->stats.rx_rssi_percentage[rfpath]) {
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ ((rtlpriv->stats.rx_rssi_percentage[rfpath]
+ * (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_mimo_signalstrength[rfpath])) /
+ (RX_SMOOTH_FACTOR);
+
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ rtlpriv->stats.rx_rssi_percentage[rfpath]
+ + 1;
+ } else {
+ rtlpriv->stats.rx_rssi_percentage[rfpath] =
+ ((rtlpriv->stats.rx_rssi_percentage[rfpath]
+ * (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_mimo_signalstrength[rfpath])) /
+ (RX_SMOOTH_FACTOR);
+ }
+
+ }
+ }
+}
+
+static void _rtl92se_update_rxsignalstatistics(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ int weighting = 0;
+
+ if (rtlpriv->stats.recv_signal_power == 0)
+ rtlpriv->stats.recv_signal_power = pstats->recvsignalpower;
+
+ if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power)
+ weighting = 5;
+ else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power)
+ weighting = (-5);
+
+ rtlpriv->stats.recv_signal_power = (rtlpriv->stats.recv_signal_power * 5
+ + pstats->recvsignalpower +
+ weighting) / 6;
+}
+
+static void _rtl92se_process_pwdb(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ long undec_sm_pwdb = 0;
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ return;
+ } else {
+ undec_sm_pwdb =
+ rtlpriv->dm.undecorated_smoothed_pwdb;
+ }
+
+ if (pstats->packet_toself || pstats->packet_beacon) {
+ if (undec_sm_pwdb < 0)
+ undec_sm_pwdb = pstats->rx_pwdb_all;
+
+ if (pstats->rx_pwdb_all > (u32) undec_sm_pwdb) {
+ undec_sm_pwdb =
+ (((undec_sm_pwdb) *
+ (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+
+ undec_sm_pwdb = undec_sm_pwdb + 1;
+ } else {
+ undec_sm_pwdb = (((undec_sm_pwdb) *
+ (RX_SMOOTH_FACTOR - 1)) + (pstats->rx_pwdb_all)) /
+ (RX_SMOOTH_FACTOR);
+ }
+
+ rtlpriv->dm.undecorated_smoothed_pwdb = undec_sm_pwdb;
+ _rtl92se_update_rxsignalstatistics(hw, pstats);
+ }
+}
+
+static void rtl_92s_process_streams(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ if (pstats->rx_mimo_signalquality[stream] != -1) {
+ if (rtlpriv->stats.rx_evm_percentage[stream] == 0) {
+ rtlpriv->stats.rx_evm_percentage[stream] =
+ pstats->rx_mimo_signalquality[stream];
+ }
+
+ rtlpriv->stats.rx_evm_percentage[stream] =
+ ((rtlpriv->stats.rx_evm_percentage[stream] *
+ (RX_SMOOTH_FACTOR - 1)) +
+ (pstats->rx_mimo_signalquality[stream] *
+ 1)) / (RX_SMOOTH_FACTOR);
+ }
+ }
+}
+
+static void _rtl92se_process_ui_link_quality(struct ieee80211_hw *hw,
+ struct rtl_stats *pstats)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 last_evm = 0, tmpval;
+
+ if (pstats->signalquality != 0) {
+ if (pstats->packet_toself || pstats->packet_beacon) {
+
+ if (rtlpriv->stats.ui_link_quality.total_num++ >=
+ PHY_LINKQUALITY_SLID_WIN_MAX) {
+ rtlpriv->stats.ui_link_quality.total_num =
+ PHY_LINKQUALITY_SLID_WIN_MAX;
+ last_evm =
+ rtlpriv->stats.ui_link_quality.elements[
+ rtlpriv->stats.ui_link_quality.index];
+ rtlpriv->stats.ui_link_quality.total_val -=
+ last_evm;
+ }
+
+ rtlpriv->stats.ui_link_quality.total_val +=
+ pstats->signalquality;
+ rtlpriv->stats.ui_link_quality.elements[
+ rtlpriv->stats.ui_link_quality.index++] =
+ pstats->signalquality;
+
+ if (rtlpriv->stats.ui_link_quality.index >=
+ PHY_LINKQUALITY_SLID_WIN_MAX)
+ rtlpriv->stats.ui_link_quality.index = 0;
+
+ tmpval = rtlpriv->stats.ui_link_quality.total_val /
+ rtlpriv->stats.ui_link_quality.total_num;
+ rtlpriv->stats.signal_quality = tmpval;
+
+ rtlpriv->stats.last_sigstrength_inpercent = tmpval;
+
+ rtl_92s_process_streams(hw, pstats);
+
+ }
+ }
+}
+
+static void _rtl92se_process_phyinfo(struct ieee80211_hw *hw,
+ u8 *buffer,
+ struct rtl_stats *pcurrent_stats)
+{
+
+ if (!pcurrent_stats->packet_matchbssid &&
+ !pcurrent_stats->packet_beacon)
+ return;
+
+ _rtl92se_process_ui_rssi(hw, pcurrent_stats);
+ _rtl92se_process_pwdb(hw, pcurrent_stats);
+ _rtl92se_process_ui_link_quality(hw, pcurrent_stats);
+}
+
+static void _rtl92se_translate_rx_signal_stuff(struct ieee80211_hw *hw,
+ struct sk_buff *skb, struct rtl_stats *pstats,
+ u8 *pdesc, struct rx_fwinfo *p_drvinfo)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+ struct ieee80211_hdr *hdr;
+ u8 *tmp_buf;
+ u8 *praddr;
+ u8 *psaddr;
+ __le16 fc;
+ u16 type, cfc;
+ bool packet_matchbssid, packet_toself, packet_beacon;
+
+ tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift;
+
+ hdr = (struct ieee80211_hdr *)tmp_buf;
+ fc = hdr->frame_control;
+ cfc = le16_to_cpu(fc);
+ type = WLAN_FC_GET_TYPE(fc);
+ praddr = hdr->addr1;
+ psaddr = hdr->addr2;
+
+ packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) &&
+ (!compare_ether_addr(mac->bssid, (cfc & IEEE80211_FCTL_TODS) ?
+ hdr->addr1 : (cfc & IEEE80211_FCTL_FROMDS) ?
+ hdr->addr2 : hdr->addr3)) && (!pstats->hwerror) &&
+ (!pstats->crc) && (!pstats->icv));
+
+ packet_toself = packet_matchbssid &&
+ (!compare_ether_addr(praddr, rtlefuse->dev_addr));
+
+ if (ieee80211_is_beacon(fc))
+ packet_beacon = true;
+
+ _rtl92se_query_rxphystatus(hw, pstats, pdesc, p_drvinfo,
+ packet_matchbssid, packet_toself, packet_beacon);
+ _rtl92se_process_phyinfo(hw, tmp_buf, pstats);
+}
+
+bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
+ struct ieee80211_rx_status *rx_status, u8 *pdesc,
+ struct sk_buff *skb)
+{
+ struct rx_fwinfo *p_drvinfo;
+ u32 phystatus = (u32)GET_RX_STATUS_DESC_PHY_STATUS(pdesc);
+
+ stats->length = (u16)GET_RX_STATUS_DESC_PKT_LEN(pdesc);
+ stats->rx_drvinfo_size = (u8)GET_RX_STATUS_DESC_DRVINFO_SIZE(pdesc) * 8;
+ stats->rx_bufshift = (u8)(GET_RX_STATUS_DESC_SHIFT(pdesc) & 0x03);
+ stats->icv = (u16)GET_RX_STATUS_DESC_ICV(pdesc);
+ stats->crc = (u16)GET_RX_STATUS_DESC_CRC32(pdesc);
+ stats->hwerror = (u16)(stats->crc | stats->icv);
+ stats->decrypted = !GET_RX_STATUS_DESC_SWDEC(pdesc);
+
+ stats->rate = (u8)GET_RX_STATUS_DESC_RX_MCS(pdesc);
+ stats->shortpreamble = (u16)GET_RX_STATUS_DESC_SPLCP(pdesc);
+ stats->isampdu = (bool)(GET_RX_STATUS_DESC_PAGGR(pdesc) == 1);
+ stats->timestamp_low = GET_RX_STATUS_DESC_TSFL(pdesc);
+ stats->rx_is40Mhzpacket = (bool)GET_RX_STATUS_DESC_BW(pdesc);
+
+ if (stats->hwerror)
+ return false;
+
+ rx_status->freq = hw->conf.channel->center_freq;
+ rx_status->band = hw->conf.channel->band;
+
+ if (GET_RX_STATUS_DESC_CRC32(pdesc))
+ rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+ if (!GET_RX_STATUS_DESC_SWDEC(pdesc))
+ rx_status->flag |= RX_FLAG_DECRYPTED;
+
+ if (GET_RX_STATUS_DESC_BW(pdesc))
+ rx_status->flag |= RX_FLAG_40MHZ;
+
+ if (GET_RX_STATUS_DESC_RX_HT(pdesc))
+ rx_status->flag |= RX_FLAG_HT;
+
+ rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+
+ if (stats->decrypted)
+ rx_status->flag |= RX_FLAG_DECRYPTED;
+
+ rx_status->rate_idx = _rtl92se_rate_mapping((bool)
+ GET_RX_STATUS_DESC_RX_HT(pdesc),
+ (u8)GET_RX_STATUS_DESC_RX_MCS(pdesc),
+ (bool)GET_RX_STATUS_DESC_PAGGR(pdesc));
+
+
+ rx_status->mactime = GET_RX_STATUS_DESC_TSFL(pdesc);
+ if (phystatus == true) {
+ p_drvinfo = (struct rx_fwinfo *)(skb->data +
+ stats->rx_bufshift);
+ _rtl92se_translate_rx_signal_stuff(hw, skb, stats, pdesc,
+ p_drvinfo);
+ }
+
+ /*rx_status->qual = stats->signal; */
+ rx_status->signal = stats->rssi + 10;
+ /*rx_status->noise = -stats->noise; */
+
+ return true;
+}
+
+void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
+ struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+ struct ieee80211_tx_info *info, struct sk_buff *skb,
+ u8 hw_queue, struct rtl_tcb_desc *ptcb_desc)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct ieee80211_sta *sta = info->control.sta;
+ u8 *pdesc = (u8 *) pdesc_tx;
+ u16 seq_number;
+ __le16 fc = hdr->frame_control;
+ u8 reserved_macid = 0;
+ u8 fw_qsel = _rtl92se_map_hwqueue_to_fwqueue(skb, hw_queue);
+ bool firstseg = (!(hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)));
+ bool lastseg = (!(hdr->frame_control &
+ cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)));
+ dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ u8 bw_40 = 0;
+
+ if (mac->opmode == NL80211_IFTYPE_STATION) {
+ bw_40 = mac->bw_40;
+ } else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC) {
+ if (sta)
+ bw_40 = sta->ht_cap.cap &
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ }
+
+ seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+
+ rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc);
+
+ CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE_RTL8192S);
+
+ if (firstseg) {
+ if (rtlpriv->dm.useramask) {
+ /* set txdesc macId */
+ if (ptcb_desc->mac_id < 32) {
+ SET_TX_DESC_MACID(pdesc, ptcb_desc->mac_id);
+ reserved_macid |= ptcb_desc->mac_id;
+ }
+ }
+ SET_TX_DESC_RSVD_MACID(pdesc, reserved_macid);
+
+ SET_TX_DESC_TXHT(pdesc, ((ptcb_desc->hw_rate >=
+ DESC92S_RATEMCS0) ? 1 : 0));
+
+ if (rtlhal->version == VERSION_8192S_ACUT) {
+ if (ptcb_desc->hw_rate == DESC92S_RATE1M ||
+ ptcb_desc->hw_rate == DESC92S_RATE2M ||
+ ptcb_desc->hw_rate == DESC92S_RATE5_5M ||
+ ptcb_desc->hw_rate == DESC92S_RATE11M) {
+ ptcb_desc->hw_rate = DESC92S_RATE12M;
+ }
+ }
+
+ SET_TX_DESC_TX_RATE(pdesc, ptcb_desc->hw_rate);
+
+ if (ptcb_desc->use_shortgi || ptcb_desc->use_shortpreamble)
+ SET_TX_DESC_TX_SHORT(pdesc, 0);
+
+ /* Aggregation related */
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ SET_TX_DESC_AGG_ENABLE(pdesc, 1);
+
+ /* For AMPDU, we must insert SSN into TX_DESC */
+ SET_TX_DESC_SEQ(pdesc, seq_number);
+
+ /* Protection mode related */
+ /* For 92S, if RTS/CTS are set, HW will execute RTS. */
+ /* We choose only one protection mode to execute */
+ SET_TX_DESC_RTS_ENABLE(pdesc, ((ptcb_desc->rts_enable &&
+ !ptcb_desc->cts_enable) ? 1 : 0));
+ SET_TX_DESC_CTS_ENABLE(pdesc, ((ptcb_desc->cts_enable) ?
+ 1 : 0));
+ SET_TX_DESC_RTS_STBC(pdesc, ((ptcb_desc->rts_stbc) ? 1 : 0));
+
+ SET_TX_DESC_RTS_RATE(pdesc, ptcb_desc->rts_rate);
+ SET_TX_DESC_RTS_BANDWIDTH(pdesc, 0);
+ SET_TX_DESC_RTS_SUB_CARRIER(pdesc, ptcb_desc->rts_sc);
+ SET_TX_DESC_RTS_SHORT(pdesc, ((ptcb_desc->rts_rate <=
+ DESC92S_RATE54M) ?
+ (ptcb_desc->rts_use_shortpreamble ? 1 : 0)
+ : (ptcb_desc->rts_use_shortgi ? 1 : 0)));
+
+
+ /* Set Bandwidth and sub-channel settings. */
+ if (bw_40) {
+ if (ptcb_desc->packet_bw) {
+ SET_TX_DESC_TX_BANDWIDTH(pdesc, 1);
+ /* use duplicated mode */
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+ } else {
+ SET_TX_DESC_TX_BANDWIDTH(pdesc, 0);
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc,
+ mac->cur_40_prime_sc);
+ }
+ } else {
+ SET_TX_DESC_TX_BANDWIDTH(pdesc, 0);
+ SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+ }
+
+ /* 3 Fill necessary field in First Descriptor */
+ /*DWORD 0*/
+ SET_TX_DESC_LINIP(pdesc, 0);
+ SET_TX_DESC_OFFSET(pdesc, 32);
+ SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb->len);
+
+ /*DWORD 1*/
+ SET_TX_DESC_RA_BRSR_ID(pdesc, ptcb_desc->ratr_index);
+
+ /* Fill security related */
+ if (info->control.hw_key) {
+ struct ieee80211_key_conf *keyconf;
+
+ keyconf = info->control.hw_key;
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x1);
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x2);
+ break;
+ case WLAN_CIPHER_SUITE_CCMP:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x3);
+ break;
+ default:
+ SET_TX_DESC_SEC_TYPE(pdesc, 0x0);
+ break;
+
+ }
+ }
+
+ /* Set Packet ID */
+ SET_TX_DESC_PACKET_ID(pdesc, 0);
+
+ /* We will assign magement queue to BK. */
+ SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel);
+
+ /* Alwasy enable all rate fallback range */
+ SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F);
+
+ /* Fix: I don't kown why hw use 6.5M to tx when set it */
+ SET_TX_DESC_USER_RATE(pdesc,
+ ptcb_desc->use_driver_rate ? 1 : 0);
+
+ /* Set NON_QOS bit. */
+ if (!ieee80211_is_data_qos(fc))
+ SET_TX_DESC_NON_QOS(pdesc, 1);
+
+ }
+
+ /* Fill fields that are required to be initialized
+ * in all of the descriptors */
+ /*DWORD 0 */
+ SET_TX_DESC_FIRST_SEG(pdesc, (firstseg ? 1 : 0));
+ SET_TX_DESC_LAST_SEG(pdesc, (lastseg ? 1 : 0));
+
+ /* DWORD 7 */
+ SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) skb->len);
+
+ /* DOWRD 8 */
+ SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, ("\n"));
+}
+
+void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
+ bool firstseg, bool lastseg, struct sk_buff *skb)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_tcb_desc *tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
+
+ dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+
+ /* Clear all status */
+ CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_CMDDESC_SIZE_RTL8192S);
+
+ /* This bit indicate this packet is used for FW download. */
+ if (tcb_desc->cmd_or_init == DESC_PACKET_TYPE_INIT) {
+ /* For firmware downlaod we only need to set LINIP */
+ SET_TX_DESC_LINIP(pdesc, tcb_desc->last_inipkt);
+
+ /* 92SE must set as 1 for firmware download HW DMA error */
+ SET_TX_DESC_FIRST_SEG(pdesc, 1);
+ SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+ /* 92SE need not to set TX packet size when firmware download */
+ SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len));
+ SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len));
+ SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+ SET_TX_DESC_OWN(pdesc, 1);
+ } else { /* H2C Command Desc format (Host TXCMD) */
+ /* 92SE must set as 1 for firmware download HW DMA error */
+ SET_TX_DESC_FIRST_SEG(pdesc, 1);
+ SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+ SET_TX_DESC_OFFSET(pdesc, 0x20);
+
+ /* Buffer size + command header */
+ SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len));
+ /* Fixed queue of H2C command */
+ SET_TX_DESC_QUEUE_SEL(pdesc, 0x13);
+
+ SET_BITS_TO_LE_4BYTE(skb->data, 24, 7, rtlhal->h2c_txcmd_seq);
+
+ SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len));
+ SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+ SET_TX_DESC_OWN(pdesc, 1);
+
+ }
+}
+
+void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+{
+ if (istx == true) {
+ switch (desc_name) {
+ case HW_DESC_OWN:
+ SET_TX_DESC_OWN(pdesc, 1);
+ break;
+ case HW_DESC_TX_NEXTDESC_ADDR:
+ SET_TX_DESC_NEXT_DESC_ADDRESS(pdesc, *(u32 *) val);
+ break;
+ default:
+ RT_ASSERT(false, ("ERR txdesc :%d not process\n",
+ desc_name));
+ break;
+ }
+ } else {
+ switch (desc_name) {
+ case HW_DESC_RXOWN:
+ SET_RX_STATUS_DESC_OWN(pdesc, 1);
+ break;
+ case HW_DESC_RXBUFF_ADDR:
+ SET_RX_STATUS__DESC_BUFF_ADDR(pdesc, *(u32 *) val);
+ break;
+ case HW_DESC_RXPKT_LEN:
+ SET_RX_STATUS_DESC_PKT_LEN(pdesc, *(u32 *) val);
+ break;
+ case HW_DESC_RXERO:
+ SET_RX_STATUS_DESC_EOR(pdesc, 1);
+ break;
+ default:
+ RT_ASSERT(false, ("ERR rxdesc :%d not process\n",
+ desc_name));
+ break;
+ }
+ }
+}
+
+u32 rtl92se_get_desc(u8 *desc, bool istx, u8 desc_name)
+{
+ u32 ret = 0;
+
+ if (istx == true) {
+ switch (desc_name) {
+ case HW_DESC_OWN:
+ ret = GET_TX_DESC_OWN(desc);
+ break;
+ case HW_DESC_TXBUFF_ADDR:
+ ret = GET_TX_DESC_TX_BUFFER_ADDRESS(desc);
+ break;
+ default:
+ RT_ASSERT(false, ("ERR txdesc :%d not process\n",
+ desc_name));
+ break;
+ }
+ } else {
+ switch (desc_name) {
+ case HW_DESC_OWN:
+ ret = GET_RX_STATUS_DESC_OWN(desc);
+ break;
+ case HW_DESC_RXPKT_LEN:
+ ret = GET_RX_STATUS_DESC_PKT_LEN(desc);
+ break;
+ default:
+ RT_ASSERT(false, ("ERR rxdesc :%d not process\n",
+ desc_name));
+ break;
+ }
+ }
+ return ret;
+}
+
+void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl_write_word(rtlpriv, TP_POLL, BIT(0) << (hw_queue));
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
new file mode 100644
index 0000000..05862c5
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h
@@ -0,0 +1,45 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_TRX_H__
+#define __REALTEK_PCI92SE_TRX_H__
+
+void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ u8 *pdesc, struct ieee80211_tx_info *info,
+ struct sk_buff *skb, u8 hw_queue,
+ struct rtl_tcb_desc *ptcb_desc);
+void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, bool firstseg,
+ bool lastseg, struct sk_buff *skb);
+bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
+ struct ieee80211_rx_status *rx_status, u8 *pdesc,
+ struct sk_buff *skb);
+void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+u32 rtl92se_get_desc(u8 *pdesc, bool istx, u8 desc_name);
+void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index f5d8573..a9367eb 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -852,6 +852,7 @@
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct rtl_tx_desc *pdesc = NULL;
+ struct rtl_tcb_desc tcb_desc;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
__le16 fc = hdr->frame_control;
u8 *pda_addr = hdr->addr1;
@@ -860,8 +861,17 @@
u8 tid = 0;
u16 seq_number = 0;
- if (ieee80211_is_mgmt(fc))
- rtl_tx_mgmt_proc(hw, skb);
+ if (ieee80211_is_auth(fc)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
+ rtl_ips_nic_on(hw);
+ }
+
+ if (rtlpriv->psc.sw_ps_enabled) {
+ if (ieee80211_is_data(fc) && !ieee80211_is_nullfunc(fc) &&
+ !ieee80211_has_pm(fc))
+ hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+ }
+
rtl_action_proc(hw, skb, true);
if (is_multicast_ether_addr(pda_addr))
rtlpriv->stats.txbytesmulticast += skb->len;
@@ -878,7 +888,7 @@
seq_number <<= 4;
}
rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, info, skb,
- hw_queue);
+ hw_queue, &tcb_desc);
if (!ieee80211_has_morefrags(hdr->frame_control)) {
if (qc)
mac->tids[tid].seq_number = seq_number;
@@ -887,7 +897,8 @@
rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX);
}
-static int rtl_usb_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+static int rtl_usb_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct rtl_tcb_desc *dummy)
{
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
diff --git a/drivers/net/wireless/rtlwifi/usb.h b/drivers/net/wireless/rtlwifi/usb.h
index abadfe9..d2a63fb 100644
--- a/drivers/net/wireless/rtlwifi/usb.h
+++ b/drivers/net/wireless/rtlwifi/usb.h
@@ -31,6 +31,8 @@
#include <linux/usb.h>
#include <linux/skbuff.h>
+#define RTL_RX_DESC_SIZE 24
+
#define RTL_USB_DEVICE(vend, prod, cfg) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 07db95f..693395e 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -68,6 +68,8 @@
#define QBSS_LOAD_SIZE 5
#define MAX_WMMELE_LENGTH 64
+#define TOTAL_CAM_ENTRY 32
+
/*slot time for 11g. */
#define RTL_SLOT_TIME_9 9
#define RTL_SLOT_TIME_20 20
@@ -94,8 +96,10 @@
#define CHANNEL_GROUP_MAX_5G 9
#define CHANNEL_MAX_NUMBER_2G 14
#define AVG_THERMAL_NUM 8
+#define MAX_TID_COUNT 9
/* for early mode */
+#define FCS_LEN 4
#define EM_HDR_LEN 8
enum intf_type {
INTF_PCI = 0,
@@ -159,6 +163,8 @@
(IS_HARDWARE_TYPE_8192DE(rtlhal) || IS_HARDWARE_TYPE_8192DU(rtlhal))
#define IS_HARDWARE_TYPE_8723(rtlhal) \
(IS_HARDWARE_TYPE_8723E(rtlhal) || IS_HARDWARE_TYPE_8723U(rtlhal))
+#define IS_HARDWARE_TYPE_8723U(rtlhal) \
+ (rtlhal->hw_type == HARDWARE_TYPE_RTL8723U)
enum scan_operation_backup_opt {
SCAN_OPT_BACKUP = 0,
@@ -297,6 +303,9 @@
HW_VAR_DATA_FILTER,
};
+#define HWSET_MAX_SIZE 128
+#define EFUSE_MAX_SECTION 16
+
enum _RT_MEDIA_STATUS {
RT_MEDIA_DISCONNECT = 0,
RT_MEDIA_CONNECT = 1
@@ -766,7 +775,7 @@
#define IQK_MATRIX_REG_NUM 8
#define IQK_MATRIX_SETTINGS_NUM (1 + 24 + 21)
struct iqk_matrix_regs {
- bool b_iqk_done;
+ bool iqk_done;
long value[1][IQK_MATRIX_REG_NUM];
};
@@ -843,6 +852,7 @@
bool apk_done;
u32 reg_rf3c[2]; /* pathA / pathB */
+ /* bfsync */
u8 framesync;
u32 framesync_c34;
@@ -852,6 +862,10 @@
};
#define MAX_TID_COUNT 9
+#define RTL_AGG_STOP 0
+#define RTL_AGG_PROGRESS 1
+#define RTL_AGG_START 2
+#define RTL_AGG_OPERATIONAL 3
#define RTL_AGG_OFF 0
#define RTL_AGG_ON 1
#define RTL_AGG_EMPTYING_HW_QUEUE_ADDBA 2
@@ -871,6 +885,13 @@
struct rtl_ht_agg agg;
};
+struct rtl_sta_info {
+ u8 ratr_index;
+ u8 wireless_mode;
+ u8 mimo_ps;
+ struct rtl_tid_data tids[MAX_TID_COUNT];
+} __packed;
+
struct rtl_priv;
struct rtl_io {
struct device *dev;
@@ -894,6 +915,7 @@
u32(*read32_sync) (struct rtl_priv *rtlpriv, u32 addr);
int (*readN_sync) (struct rtl_priv *rtlpriv, u32 addr, u16 len,
u8 *pdata);
+
};
struct rtl_mac {
@@ -916,6 +938,8 @@
int n_channels;
int n_bitrates;
+ bool offchan_deley;
+
/*filters */
u32 rx_conf;
u16 rx_mgt_filter;
@@ -1032,7 +1056,9 @@
enum rt_enc_alg pairwise_enc_algorithm;
/*Encryption Algorithm for Brocast/Multicast */
enum rt_enc_alg group_enc_algorithm;
-
+ /*Cam Entry Bitmap */
+ u32 hwsec_cam_bitmap;
+ u8 hwsec_cam_sta_addr[TOTAL_CAM_ENTRY][ETH_ALEN];
/*local Key buffer, indx 0 is for
pairwise key 1-4 is for agoup key. */
u8 key_buf[KEY_BUF_SIZE][MAX_KEY_LEN];
@@ -1053,7 +1079,7 @@
bool current_turbo_edca;
bool is_any_nonbepkts; /*out dm */
bool is_cur_rdlstate;
- bool txpower_trackingInit;
+ bool txpower_trackinginit;
bool disable_framebursting;
bool cck_inch14;
bool txpower_tracking;
@@ -1079,7 +1105,6 @@
bool disable_tx_int;
char ofdm_index[2];
char cck_index;
- u8 power_index_backup[6];
};
#define EFUSE_MAX_LOGICAL_SIZE 256
@@ -1175,6 +1200,7 @@
* otherwise Offset[560h] = 0x00.
* */
bool support_aspm;
+
bool support_backdoor;
/*for LPS */
@@ -1201,7 +1227,6 @@
/*just for PCIE ASPM */
u8 const_amdpci_aspm;
-
bool pwrdown_mode;
enum rf_pwrstate inactive_pwrstate;
@@ -1282,6 +1307,10 @@
bool busytraffic;
bool higher_busytraffic;
bool higher_busyrxtraffic;
+
+ u32 tidtx_in4period[MAX_TID_COUNT][4];
+ u32 tidtx_inperiod[MAX_TID_COUNT];
+ bool higher_busytxtraffic[MAX_TID_COUNT];
};
struct rtl_tcb_desc {
@@ -1344,13 +1373,15 @@
u32 add_msr, u32 rm_msr);
void (*get_hw_reg) (struct ieee80211_hw *hw, u8 variable, u8 *val);
void (*set_hw_reg) (struct ieee80211_hw *hw, u8 variable, u8 *val);
- void (*update_rate_table) (struct ieee80211_hw *hw);
+ void (*update_rate_tbl) (struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level);
void (*update_rate_mask) (struct ieee80211_hw *hw, u8 rssi_level);
void (*fill_tx_desc) (struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr, u8 *pdesc_tx,
struct ieee80211_tx_info *info,
- struct sk_buff *skb, unsigned int queue_index);
- void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 * pDesc,
+ struct sk_buff *skb, u8 hw_queue,
+ struct rtl_tcb_desc *ptcb_desc);
+ void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pDesc,
u32 buffer_len, bool bIsPsPoll);
void (*fill_tx_cmddesc) (struct ieee80211_hw *hw, u8 *pdesc,
bool firstseg, bool lastseg,
@@ -1370,10 +1401,10 @@
enum led_ctl_mode ledaction);
void (*set_desc) (u8 *pdesc, bool istx, u8 desc_name, u8 *val);
u32 (*get_desc) (u8 *pdesc, bool istx, u8 desc_name);
- void (*tx_polling) (struct ieee80211_hw *hw, unsigned int hw_queue);
+ void (*tx_polling) (struct ieee80211_hw *hw, u8 hw_queue);
void (*enable_hw_sec) (struct ieee80211_hw *hw);
void (*set_key) (struct ieee80211_hw *hw, u32 key_index,
- u8 *p_macaddr, bool is_group, u8 enc_algo,
+ u8 *macaddr, bool is_group, u8 enc_algo,
bool is_wepkey, bool clear_all);
void (*init_sw_leds) (struct ieee80211_hw *hw);
void (*deinit_sw_leds) (struct ieee80211_hw *hw);
@@ -1384,6 +1415,7 @@
u32 regaddr, u32 bitmask);
void (*set_rfreg) (struct ieee80211_hw *hw, enum radio_path rfpath,
u32 regaddr, u32 bitmask, u32 data);
+ void (*linked_set_reg) (struct ieee80211_hw *hw);
bool (*phy_rf6052_config) (struct ieee80211_hw *hw);
void (*phy_rf6052_set_cck_txpower) (struct ieee80211_hw *hw,
u8 *powerlevel);
@@ -1404,7 +1436,9 @@
int (*adapter_start) (struct ieee80211_hw *hw);
void (*adapter_stop) (struct ieee80211_hw *hw);
- int (*adapter_tx) (struct ieee80211_hw *hw, struct sk_buff *skb);
+ int (*adapter_tx) (struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct rtl_tcb_desc *ptcb_desc);
+ void (*flush)(struct ieee80211_hw *hw, bool drop);
int (*reset_trx_ring) (struct ieee80211_hw *hw);
bool (*waitq_insert) (struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1418,6 +1452,15 @@
struct rtl_mod_params {
/* default: 0 = using hardware encryption */
int sw_crypto;
+
+ /* default: 1 = using no linked power save */
+ bool inactiveps;
+
+ /* default: 1 = using linked sw power save */
+ bool swctrl_lps;
+
+ /* default: 1 = using linked fw power save */
+ bool fwctrl_lps;
};
struct rtl_hal_usbint_cfg {
@@ -1445,6 +1488,7 @@
struct rtl_hal_cfg {
u8 bar_id;
+ bool write_readback;
char *name;
char *fw_name;
struct rtl_hal_ops *ops;
@@ -1469,7 +1513,6 @@
spinlock_t rf_lock;
spinlock_t lps_lock;
spinlock_t waitq_lock;
- spinlock_t tx_urb_lock;
/*Dual mac*/
spinlock_t cck_and_rw_pagea_lock;
@@ -1621,19 +1664,19 @@
u32 bt_edca_ul;
u32 bt_edca_dl;
- bool b_init_set;
- bool b_bt_busy_traffic;
- bool b_bt_traffic_mode_set;
- bool b_bt_non_traffic_mode_set;
+ bool init_set;
+ bool bt_busy_traffic;
+ bool bt_traffic_mode_set;
+ bool bt_non_traffic_mode_set;
- bool b_fw_coexist_all_off;
- bool b_sw_coexist_all_off;
+ bool fw_coexist_all_off;
+ bool sw_coexist_all_off;
u32 current_state;
u32 previous_state;
u8 bt_pre_rssi_state;
- u8 b_reg_bt_iso;
- u8 b_reg_bt_sco;
+ u8 reg_bt_iso;
+ u8 reg_bt_sco;
};
@@ -1653,13 +1696,23 @@
#define EF4BYTE(_val) \
(le32_to_cpu(_val))
+/* Read data from memory */
+#define READEF1BYTE(_ptr) \
+ EF1BYTE(*((u8 *)(_ptr)))
/* Read le16 data from memory and convert to host ordering */
#define READEF2BYTE(_ptr) \
EF2BYTE(*((u16 *)(_ptr)))
+#define READEF4BYTE(_ptr) \
+ EF4BYTE(*((u32 *)(_ptr)))
+/* Write data to memory */
+#define WRITEEF1BYTE(_ptr, _val) \
+ (*((u8 *)(_ptr))) = EF1BYTE(_val)
/* Write le16 data to memory in host ordering */
#define WRITEEF2BYTE(_ptr, _val) \
(*((u16 *)(_ptr))) = EF2BYTE(_val)
+#define WRITEEF4BYTE(_ptr, _val) \
+ (*((u16 *)(_ptr))) = EF2BYTE(_val)
/* Create a bit mask
* Examples:
@@ -1698,6 +1751,25 @@
#define LE_P1BYTE_TO_HOST_1BYTE(__pstart) \
(EF1BYTE(*((u8 *)(__pstart))))
+/*Description:
+Translate subfield (continuous bits in little-endian) of 4-byte
+value to host byte ordering.*/
+#define LE_BITS_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P4BYTE_TO_HOST_4BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_32(__bitlen) \
+ )
+#define LE_BITS_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P2BYTE_TO_HOST_2BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_16(__bitlen) \
+ )
+#define LE_BITS_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+ ( \
+ (LE_P1BYTE_TO_HOST_1BYTE(__pstart) >> (__bitoffset)) & \
+ BIT_LEN_MASK_8(__bitlen) \
+ )
+
/* Description:
* Mask subfield (continuous bits in little-endian) of 4-byte value
* and return the result in 4-byte value in host byte ordering.
@@ -1721,6 +1793,18 @@
/* Description:
* Set subfield of little-endian 4-byte value to specified value.
*/
+#define SET_BITS_TO_LE_4BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u32 *)(__pstart)) = EF4BYTE \
+ ( \
+ LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u32)__val) & BIT_LEN_MASK_32(__bitlen)) << (__bitoffset)) \
+ );
+#define SET_BITS_TO_LE_2BYTE(__pstart, __bitoffset, __bitlen, __val) \
+ *((u16 *)(__pstart)) = EF2BYTE \
+ ( \
+ LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) | \
+ ((((u16)__val) & BIT_LEN_MASK_16(__bitlen)) << (__bitoffset)) \
+ );
#define SET_BITS_TO_LE_1BYTE(__pstart, __bitoffset, __bitlen, __val) \
*((u8 *)(__pstart)) = EF1BYTE \
( \
@@ -1728,12 +1812,16 @@
((((u8)__val) & BIT_LEN_MASK_8(__bitlen)) << (__bitoffset)) \
);
+#define N_BYTE_ALIGMENT(__value, __aligment) ((__aligment == 1) ? \
+ (__value) : (((__value + __aligment - 1) / __aligment) * __aligment))
+
/****************************************
mem access macro define end
****************************************/
#define byte(x, n) ((x >> (8 * n)) & 0xff)
+#define packet_get_type(_packet) (EF1BYTE((_packet).octet[0]) & 0xFC)
#define RTL_WATCH_DOG_TIME 2000
#define MSECS(t) msecs_to_jiffies(t)
#define WLAN_FC_GET_VERS(fc) (le16_to_cpu(fc) & IEEE80211_FCTL_VERS)
@@ -1768,6 +1856,15 @@
#define container_of_dwork_rtl(x, y, z) \
container_of(container_of(x, struct delayed_work, work), y, z)
+#define FILL_OCTET_STRING(_os, _octet, _len) \
+ (_os).octet = (u8 *)(_octet); \
+ (_os).length = (_len);
+
+#define CP_MACADDR(des, src) \
+ ((des)[0] = (src)[0], (des)[1] = (src)[1],\
+ (des)[2] = (src)[2], (des)[3] = (src)[3],\
+ (des)[4] = (src)[4], (des)[5] = (src)[5])
+
static inline u8 rtl_read_byte(struct rtl_priv *rtlpriv, u32 addr)
{
return rtlpriv->io.read8_sync(rtlpriv, addr);
@@ -1786,17 +1883,26 @@
static inline void rtl_write_byte(struct rtl_priv *rtlpriv, u32 addr, u8 val8)
{
rtlpriv->io.write8_async(rtlpriv, addr, val8);
+
+ if (rtlpriv->cfg->write_readback)
+ rtlpriv->io.read8_sync(rtlpriv, addr);
}
static inline void rtl_write_word(struct rtl_priv *rtlpriv, u32 addr, u16 val16)
{
rtlpriv->io.write16_async(rtlpriv, addr, val16);
+
+ if (rtlpriv->cfg->write_readback)
+ rtlpriv->io.read16_sync(rtlpriv, addr);
}
static inline void rtl_write_dword(struct rtl_priv *rtlpriv,
u32 addr, u32 val32)
{
rtlpriv->io.write32_async(rtlpriv, addr, val32);
+
+ if (rtlpriv->cfg->write_readback)
+ rtlpriv->io.read32_sync(rtlpriv, addr);
}
static inline u32 rtl_get_bbreg(struct ieee80211_hw *hw,
@@ -1855,4 +1961,31 @@
return rtlphy->rf_type;
}
+static inline struct ieee80211_hdr *rtl_get_hdr(struct sk_buff *skb)
+{
+ return (struct ieee80211_hdr *)(skb->data);
+}
+
+static inline __le16 rtl_get_fc(struct sk_buff *skb)
+{
+ return rtl_get_hdr(skb)->frame_control;
+}
+
+static inline u16 rtl_get_tid_h(struct ieee80211_hdr *hdr)
+{
+ return (ieee80211_get_qos_ctl(hdr))[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
+static inline u16 rtl_get_tid(struct sk_buff *skb)
+{
+ return rtl_get_tid_h(rtl_get_hdr(skb));
+}
+
+static inline struct ieee80211_sta *get_sta(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ u8 *bssid)
+{
+ return ieee80211_find_sta(vif, bssid);
+}
+
#endif
diff --git a/drivers/net/wireless/wl1251/cmd.h b/drivers/net/wireless/wl1251/cmd.h
index e5c74c6..79ca527 100644
--- a/drivers/net/wireless/wl1251/cmd.h
+++ b/drivers/net/wireless/wl1251/cmd.h
@@ -313,8 +313,8 @@
} __packed;
enum wl1251_cmd_ps_mode {
- STATION_ACTIVE_MODE,
- STATION_POWER_SAVE_MODE
+ CHIP_ACTIVE_MODE,
+ CHIP_POWER_SAVE_MODE
};
struct wl1251_cmd_ps_params {
diff --git a/drivers/net/wireless/wl1251/event.c b/drivers/net/wireless/wl1251/event.c
index dfc4579..9f15cca 100644
--- a/drivers/net/wireless/wl1251/event.c
+++ b/drivers/net/wireless/wl1251/event.c
@@ -68,14 +68,16 @@
if (vector & BSS_LOSE_EVENT_ID) {
wl1251_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
- if (wl->psm_requested && wl->psm) {
+ if (wl->psm_requested &&
+ wl->station_mode != STATION_ACTIVE_MODE) {
ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
if (ret < 0)
return ret;
}
}
- if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID && wl->psm) {
+ if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
+ wl->station_mode != STATION_ACTIVE_MODE) {
wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
/* indicate to the stack, that beacons have been lost */
diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c
index 12c9e63..a14a48c 100644
--- a/drivers/net/wireless/wl1251/main.c
+++ b/drivers/net/wireless/wl1251/main.c
@@ -497,7 +497,7 @@
wl->rx_last_id = 0;
wl->next_tx_complete = 0;
wl->elp = false;
- wl->psm = 0;
+ wl->station_mode = STATION_ACTIVE_MODE;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
wl->rssi_thold = 0;
@@ -632,13 +632,29 @@
wl->psm_requested = false;
- if (wl->psm) {
+ if (wl->station_mode != STATION_ACTIVE_MODE) {
ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
if (ret < 0)
goto out_sleep;
}
}
+ if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ if (conf->flags & IEEE80211_CONF_IDLE) {
+ ret = wl1251_ps_set_mode(wl, STATION_IDLE);
+ if (ret < 0)
+ goto out_sleep;
+ } else {
+ ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ goto out_sleep;
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ if (ret < 0)
+ goto out_sleep;
+ }
+ }
+
if (conf->power_level != wl->power_level) {
ret = wl1251_acx_tx_power(wl, conf->power_level);
if (ret < 0)
@@ -1384,7 +1400,7 @@
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
wl->elp = false;
- wl->psm = 0;
+ wl->station_mode = STATION_ACTIVE_MODE;
wl->psm_requested = false;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
diff --git a/drivers/net/wireless/wl1251/ps.c b/drivers/net/wireless/wl1251/ps.c
index 9cc5147..db719f7 100644
--- a/drivers/net/wireless/wl1251/ps.c
+++ b/drivers/net/wireless/wl1251/ps.c
@@ -39,7 +39,7 @@
mutex_lock(&wl->mutex);
- if (wl->elp || !wl->psm)
+ if (wl->elp || wl->station_mode == STATION_ACTIVE_MODE)
goto out;
wl1251_debug(DEBUG_PSM, "chip to elp");
@@ -57,7 +57,7 @@
{
unsigned long delay;
- if (wl->psm) {
+ if (wl->station_mode != STATION_ACTIVE_MODE) {
delay = msecs_to_jiffies(ELP_ENTRY_DELAY);
ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, delay);
}
@@ -104,7 +104,7 @@
return 0;
}
-int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode)
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_station_mode mode)
{
int ret;
@@ -128,15 +128,24 @@
if (ret < 0)
return ret;
- ret = wl1251_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+ ret = wl1251_cmd_ps_mode(wl, CHIP_POWER_SAVE_MODE);
if (ret < 0)
return ret;
ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_ELP);
if (ret < 0)
return ret;
+ break;
+ case STATION_IDLE:
+ wl1251_debug(DEBUG_PSM, "entering idle");
- wl->psm = 1;
+ ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_ELP);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_template_set(wl, CMD_DISCONNECT, NULL, 0);
+ if (ret < 0)
+ return ret;
break;
case STATION_ACTIVE_MODE:
default:
@@ -163,13 +172,13 @@
if (ret < 0)
return ret;
- ret = wl1251_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+ ret = wl1251_cmd_ps_mode(wl, CHIP_ACTIVE_MODE);
if (ret < 0)
return ret;
- wl->psm = 0;
break;
}
+ wl->station_mode = mode;
return ret;
}
diff --git a/drivers/net/wireless/wl1251/ps.h b/drivers/net/wireless/wl1251/ps.h
index 55c3dda..75efad2 100644
--- a/drivers/net/wireless/wl1251/ps.h
+++ b/drivers/net/wireless/wl1251/ps.h
@@ -26,7 +26,7 @@
#include "wl1251.h"
#include "acx.h"
-int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode);
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_station_mode mode);
void wl1251_ps_elp_sleep(struct wl1251 *wl);
int wl1251_ps_elp_wakeup(struct wl1251 *wl);
void wl1251_elp_work(struct work_struct *work);
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index bb23cd5..a77f1bb 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -129,6 +129,12 @@
PART_TABLE_LEN
};
+enum wl1251_station_mode {
+ STATION_ACTIVE_MODE,
+ STATION_POWER_SAVE_MODE,
+ STATION_IDLE,
+};
+
struct wl1251_partition {
u32 size;
u32 start;
@@ -358,8 +364,7 @@
struct delayed_work elp_work;
- /* we can be in psm, but not in elp, we have to differentiate */
- bool psm;
+ enum wl1251_station_mode station_mode;
/* PSM mode requested */
bool psm_requested;
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 692ebff..35ce7b0 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -3,7 +3,7 @@
depends on MAC80211 && EXPERIMENTAL
---help---
This will enable TI wl12xx driver support for the following chips:
- wl1271 and wl1273.
+ wl1271, wl1273, wl1281 and wl1283.
The drivers make use of the mac80211 stack.
config WL12XX
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index a3db755..c6ee530 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -325,12 +325,19 @@
return ret;
}
-int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold)
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold)
{
struct acx_rts_threshold *rts;
int ret;
- wl1271_debug(DEBUG_ACX, "acx rts threshold");
+ /*
+ * If the RTS threshold is not configured or out of range, use the
+ * default value.
+ */
+ if (rts_threshold > IEEE80211_MAX_RTS_THRESHOLD)
+ rts_threshold = wl->conf.rx.rts_threshold;
+
+ wl1271_debug(DEBUG_ACX, "acx rts threshold: %d", rts_threshold);
rts = kzalloc(sizeof(*rts), GFP_KERNEL);
if (!rts) {
@@ -338,7 +345,7 @@
goto out;
}
- rts->threshold = cpu_to_le16(rts_threshold);
+ rts->threshold = cpu_to_le16((u16)rts_threshold);
ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
if (ret < 0) {
@@ -540,13 +547,13 @@
return ret;
}
-int wl1271_acx_sg_cfg(struct wl1271 *wl)
+int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
{
- struct acx_bt_wlan_coex_param *param;
+ struct acx_sta_bt_wlan_coex_param *param;
struct conf_sg_settings *c = &wl->conf.sg;
int i, ret;
- wl1271_debug(DEBUG_ACX, "acx sg cfg");
+ wl1271_debug(DEBUG_ACX, "acx sg sta cfg");
param = kzalloc(sizeof(*param), GFP_KERNEL);
if (!param) {
@@ -555,8 +562,38 @@
}
/* BT-WLAN coext parameters */
- for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
- param->params[i] = cpu_to_le32(c->params[i]);
+ for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)
+ param->params[i] = cpu_to_le32(c->sta_params[i]);
+ param->param_idx = CONF_SG_PARAMS_ALL;
+
+ ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
+ if (ret < 0) {
+ wl1271_warning("failed to set sg config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(param);
+ return ret;
+}
+
+int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)
+{
+ struct acx_ap_bt_wlan_coex_param *param;
+ struct conf_sg_settings *c = &wl->conf.sg;
+ int i, ret;
+
+ wl1271_debug(DEBUG_ACX, "acx sg ap cfg");
+
+ param = kzalloc(sizeof(*param), GFP_KERNEL);
+ if (!param) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* BT-WLAN coext parameters */
+ for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)
+ param->params[i] = cpu_to_le32(c->ap_params[i]);
param->param_idx = CONF_SG_PARAMS_ALL;
ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
@@ -804,7 +841,8 @@
struct acx_ap_rate_policy *acx;
int ret = 0;
- wl1271_debug(DEBUG_ACX, "acx ap rate policy");
+ wl1271_debug(DEBUG_ACX, "acx ap rate policy %d rates 0x%x",
+ idx, c->enabled_rates);
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
@@ -898,12 +936,19 @@
return ret;
}
-int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold)
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold)
{
struct acx_frag_threshold *acx;
int ret = 0;
- wl1271_debug(DEBUG_ACX, "acx frag threshold");
+ /*
+ * If the fragmentation is not configured or out of range, use the
+ * default value.
+ */
+ if (frag_threshold > IEEE80211_MAX_FRAG_THRESHOLD)
+ frag_threshold = wl->conf.tx.frag_threshold;
+
+ wl1271_debug(DEBUG_ACX, "acx frag threshold: %d", frag_threshold);
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
@@ -912,7 +957,7 @@
goto out;
}
- acx->frag_threshold = cpu_to_le16(frag_threshold);
+ acx->frag_threshold = cpu_to_le16((u16)frag_threshold);
ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("Setting of frag threshold failed: %d", ret);
@@ -954,6 +999,7 @@
int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
{
struct wl1271_acx_ap_config_memory *mem_conf;
+ struct conf_memory_settings *mem;
int ret;
wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@@ -964,11 +1010,21 @@
goto out;
}
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ /*
+ * FIXME: The 128x AP FW does not yet support dynamic memory.
+ * Use the base memory configuration for 128x for now. This
+ * should be fine tuned in the future.
+ */
+ mem = &wl->conf.mem_wl128x;
+ else
+ mem = &wl->conf.mem_wl127x;
+
/* memory config */
- mem_conf->num_stations = wl->conf.mem.num_stations;
- mem_conf->rx_mem_block_num = wl->conf.mem.rx_block_num;
- mem_conf->tx_min_mem_block_num = wl->conf.mem.tx_min_block_num;
- mem_conf->num_ssid_profiles = wl->conf.mem.ssid_profiles;
+ mem_conf->num_stations = mem->num_stations;
+ mem_conf->rx_mem_block_num = mem->rx_block_num;
+ mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
+ mem_conf->num_ssid_profiles = mem->ssid_profiles;
mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
@@ -986,6 +1042,7 @@
int wl1271_acx_sta_mem_cfg(struct wl1271 *wl)
{
struct wl1271_acx_sta_config_memory *mem_conf;
+ struct conf_memory_settings *mem;
int ret;
wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@@ -996,16 +1053,21 @@
goto out;
}
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ mem = &wl->conf.mem_wl128x;
+ else
+ mem = &wl->conf.mem_wl127x;
+
/* memory config */
- mem_conf->num_stations = wl->conf.mem.num_stations;
- mem_conf->rx_mem_block_num = wl->conf.mem.rx_block_num;
- mem_conf->tx_min_mem_block_num = wl->conf.mem.tx_min_block_num;
- mem_conf->num_ssid_profiles = wl->conf.mem.ssid_profiles;
+ mem_conf->num_stations = mem->num_stations;
+ mem_conf->rx_mem_block_num = mem->rx_block_num;
+ mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
+ mem_conf->num_ssid_profiles = mem->ssid_profiles;
mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
- mem_conf->dyn_mem_enable = wl->conf.mem.dynamic_memory;
- mem_conf->tx_free_req = wl->conf.mem.min_req_tx_blocks;
- mem_conf->rx_free_req = wl->conf.mem.min_req_rx_blocks;
- mem_conf->tx_min = wl->conf.mem.tx_min;
+ mem_conf->dyn_mem_enable = mem->dynamic_memory;
+ mem_conf->tx_free_req = mem->min_req_tx_blocks;
+ mem_conf->rx_free_req = mem->min_req_rx_blocks;
+ mem_conf->tx_min = mem->tx_min;
ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
sizeof(*mem_conf));
@@ -1019,6 +1081,32 @@
return ret;
}
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
+{
+ struct wl1271_acx_host_config_bitmap *bitmap_conf;
+ int ret;
+
+ bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
+ if (!bitmap_conf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
+
+ ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
+ bitmap_conf, sizeof(*bitmap_conf));
+ if (ret < 0) {
+ wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(bitmap_conf);
+
+ return ret;
+}
+
int wl1271_acx_init_mem_config(struct wl1271 *wl)
{
int ret;
@@ -1567,3 +1655,68 @@
kfree(acx);
return ret;
}
+
+int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable)
+{
+ struct acx_ap_beacon_filter *acx = NULL;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx set ap beacon filter: %d", enable);
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx)
+ return -ENOMEM;
+
+ acx->enable = enable ? 1 : 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_AP_BEACON_FILTER_OPT,
+ acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("acx set ap beacon filter failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_fm_coex(struct wl1271 *wl)
+{
+ struct wl1271_acx_fm_coex *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx fm coex setting");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->enable = wl->conf.fm_coex.enable;
+ acx->swallow_period = wl->conf.fm_coex.swallow_period;
+ acx->n_divider_fref_set_1 = wl->conf.fm_coex.n_divider_fref_set_1;
+ acx->n_divider_fref_set_2 = wl->conf.fm_coex.n_divider_fref_set_2;
+ acx->m_divider_fref_set_1 =
+ cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_1);
+ acx->m_divider_fref_set_2 =
+ cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_2);
+ acx->coex_pll_stabilization_time =
+ cpu_to_le32(wl->conf.fm_coex.coex_pll_stabilization_time);
+ acx->ldo_stabilization_time =
+ cpu_to_le16(wl->conf.fm_coex.ldo_stabilization_time);
+ acx->fm_disturbed_band_margin =
+ wl->conf.fm_coex.fm_disturbed_band_margin;
+ acx->swallow_clk_diff = wl->conf.fm_coex.swallow_clk_diff;
+
+ ret = wl1271_cmd_configure(wl, ACX_FM_COEX_CFG, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("acx fm coex setting failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index dd19b01..9a895e3 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -303,7 +303,6 @@
struct acx_header header;
u8 enable;
-
/*
* The number of beacons without the unicast TIM
* bit set that the firmware buffers before
@@ -370,14 +369,23 @@
u8 pad[3];
} __packed;
-struct acx_bt_wlan_coex_param {
+struct acx_sta_bt_wlan_coex_param {
struct acx_header header;
- __le32 params[CONF_SG_PARAMS_MAX];
+ __le32 params[CONF_SG_STA_PARAMS_MAX];
u8 param_idx;
u8 padding[3];
} __packed;
+struct acx_ap_bt_wlan_coex_param {
+ struct acx_header header;
+
+ __le32 params[CONF_SG_AP_PARAMS_MAX];
+ u8 param_idx;
+ u8 padding[3];
+} __packed;
+
+
struct acx_dco_itrim_params {
struct acx_header header;
@@ -939,6 +947,16 @@
u8 padding;
} __packed;
+#define HOST_IF_CFG_RX_FIFO_ENABLE BIT(0)
+#define HOST_IF_CFG_TX_EXTRA_BLKS_SWAP BIT(1)
+#define HOST_IF_CFG_TX_PAD_TO_SDIO_BLK BIT(3)
+
+struct wl1271_acx_host_config_bitmap {
+ struct acx_header header;
+
+ __le32 host_cfg_bitmap;
+} __packed;
+
enum {
WL1271_ACX_TRIG_TYPE_LEVEL = 0,
WL1271_ACX_TRIG_TYPE_EDGE,
@@ -1162,6 +1180,72 @@
u8 padding1[2];
} __packed;
+struct acx_ap_beacon_filter {
+ struct acx_header header;
+
+ u8 enable;
+ u8 pad[3];
+} __packed;
+
+/*
+ * ACX_FM_COEX_CFG
+ * set the FM co-existence parameters.
+ */
+struct wl1271_acx_fm_coex {
+ struct acx_header header;
+ /* enable(1) / disable(0) the FM Coex feature */
+ u8 enable;
+ /*
+ * Swallow period used in COEX PLL swallowing mechanism.
+ * 0xFF = use FW default
+ */
+ u8 swallow_period;
+ /*
+ * The N divider used in COEX PLL swallowing mechanism for Fref of
+ * 38.4/19.2 Mhz. 0xFF = use FW default
+ */
+ u8 n_divider_fref_set_1;
+ /*
+ * The N divider used in COEX PLL swallowing mechanism for Fref of
+ * 26/52 Mhz. 0xFF = use FW default
+ */
+ u8 n_divider_fref_set_2;
+ /*
+ * The M divider used in COEX PLL swallowing mechanism for Fref of
+ * 38.4/19.2 Mhz. 0xFFFF = use FW default
+ */
+ __le16 m_divider_fref_set_1;
+ /*
+ * The M divider used in COEX PLL swallowing mechanism for Fref of
+ * 26/52 Mhz. 0xFFFF = use FW default
+ */
+ __le16 m_divider_fref_set_2;
+ /*
+ * The time duration in uSec required for COEX PLL to stabilize.
+ * 0xFFFFFFFF = use FW default
+ */
+ __le32 coex_pll_stabilization_time;
+ /*
+ * The time duration in uSec required for LDO to stabilize.
+ * 0xFFFFFFFF = use FW default
+ */
+ __le16 ldo_stabilization_time;
+ /*
+ * The disturbed frequency band margin around the disturbed frequency
+ * center (single sided).
+ * For example, if 2 is configured, the following channels will be
+ * considered disturbed channel:
+ * 80 +- 0.1 MHz, 91 +- 0.1 MHz, 98 +- 0.1 MHz, 102 +- 0.1 MH
+ * 0xFF = use FW default
+ */
+ u8 fm_disturbed_band_margin;
+ /*
+ * The swallow clock difference of the swallowing mechanism.
+ * 0xFF = use FW default
+ */
+ u8 swallow_clk_diff;
+} __packed;
+
enum {
ACX_WAKE_UP_CONDITIONS = 0x0002,
ACX_MEM_CFG = 0x0003,
@@ -1180,6 +1264,7 @@
ACX_TID_CFG = 0x001A,
ACX_PS_RX_STREAMING = 0x001B,
ACX_BEACON_FILTER_OPT = 0x001F,
+ ACX_AP_BEACON_FILTER_OPT = 0x0020,
ACX_NOISE_HIST = 0x0021,
ACX_HDK_VERSION = 0x0022, /* ??? */
ACX_PD_THRESHOLD = 0x0023,
@@ -1191,6 +1276,7 @@
ACX_BCN_DTIM_OPTIONS = 0x0031,
ACX_SG_ENABLE = 0x0032,
ACX_SG_CFG = 0x0033,
+ ACX_FM_COEX_CFG = 0x0034,
ACX_BEACON_FILTER_TABLE = 0x0038,
ACX_ARP_IP_FILTER = 0x0039,
ACX_ROAMING_STATISTICS_TBL = 0x003B,
@@ -1247,13 +1333,14 @@
int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
void *mc_list, u32 mc_list_len);
int wl1271_acx_service_period_timeout(struct wl1271 *wl);
-int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold);
int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
-int wl1271_acx_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);
int wl1271_acx_cca_threshold(struct wl1271 *wl);
int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
@@ -1270,11 +1357,12 @@
int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type,
u8 tsid, u8 ps_scheme, u8 ack_policy,
u32 apsd_conf0, u32 apsd_conf1);
-int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold);
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold);
int wl1271_acx_tx_config_options(struct wl1271 *wl);
int wl1271_acx_ap_mem_cfg(struct wl1271 *wl);
int wl1271_acx_sta_mem_cfg(struct wl1271 *wl);
int wl1271_acx_init_mem_config(struct wl1271 *wl);
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
int wl1271_acx_smart_reflex(struct wl1271 *wl);
int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
@@ -1299,5 +1387,7 @@
int wl1271_acx_max_tx_retry(struct wl1271 *wl);
int wl1271_acx_config_ps(struct wl1271 *wl);
int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_set_ap_beacon_filter(struct wl1271 *wl, bool enable);
+int wl1271_acx_fm_coex(struct wl1271 *wl);
#endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 6934dffd..b07f8b7 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -22,6 +22,7 @@
*/
#include <linux/slab.h>
+#include <linux/wl12xx.h>
#include "acx.h"
#include "reg.h"
@@ -243,33 +244,57 @@
if (wl->nvs == NULL)
return -ENODEV;
- /*
- * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
- * configurations) can be removed when those NVS files stop floating
- * around.
- */
- if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
- wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
- /* for now 11a is unsupported in AP mode */
- if (wl->bss_type != BSS_TYPE_AP_BSS &&
- wl->nvs->general_params.dual_mode_select)
- wl->enable_11a = true;
- }
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
- if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
- (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
- wl->enable_11a)) {
- wl1271_error("nvs size is not as expected: %zu != %zu",
- wl->nvs_len, sizeof(struct wl1271_nvs_file));
- kfree(wl->nvs);
- wl->nvs = NULL;
- wl->nvs_len = 0;
- return -EILSEQ;
- }
+ if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
+ if (nvs->general_params.dual_mode_select)
+ wl->enable_11a = true;
+ } else {
+ wl1271_error("nvs size is not as expected: %zu != %zu",
+ wl->nvs_len,
+ sizeof(struct wl128x_nvs_file));
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+ wl->nvs_len = 0;
+ return -EILSEQ;
+ }
- /* only the first part of the NVS needs to be uploaded */
- nvs_len = sizeof(wl->nvs->nvs);
- nvs_ptr = (u8 *)wl->nvs->nvs;
+ /* only the first part of the NVS needs to be uploaded */
+ nvs_len = sizeof(nvs->nvs);
+ nvs_ptr = (u8 *)nvs->nvs;
+
+ } else {
+ struct wl1271_nvs_file *nvs =
+ (struct wl1271_nvs_file *)wl->nvs;
+ /*
+ * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
+ * band configurations) can be removed when those NVS files stop
+ * floating around.
+ */
+ if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
+ wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
+ /* for now 11a is unsupported in AP mode */
+ if (wl->bss_type != BSS_TYPE_AP_BSS &&
+ nvs->general_params.dual_mode_select)
+ wl->enable_11a = true;
+ }
+
+ if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
+ (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
+ wl->enable_11a)) {
+ wl1271_error("nvs size is not as expected: %zu != %zu",
+ wl->nvs_len, sizeof(struct wl1271_nvs_file));
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+ wl->nvs_len = 0;
+ return -EILSEQ;
+ }
+
+ /* only the first part of the NVS needs to be uploaded */
+ nvs_len = sizeof(nvs->nvs);
+ nvs_ptr = (u8 *) nvs->nvs;
+ }
/* update current MAC address to NVS */
nvs_ptr[11] = wl->mac_addr[0];
@@ -319,10 +344,13 @@
/*
* We've reached the first zero length, the first NVS table
* is located at an aligned offset which is at least 7 bytes further.
+ * NOTE: The wl->nvs->nvs element must be first, in order to
+ * simplify the casting, we assume it is at the beginning of
+ * the wl->nvs structure.
*/
- nvs_ptr = (u8 *)wl->nvs->nvs +
- ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4);
- nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
+ nvs_ptr = (u8 *)wl->nvs +
+ ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
+ nvs_len -= nvs_ptr - (u8 *)wl->nvs;
/* Now we must set the partition correctly */
wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -450,10 +478,14 @@
DISCONNECT_EVENT_COMPLETE_ID |
RSSI_SNR_TRIGGER_0_EVENT_ID |
PSPOLL_DELIVERY_FAILURE_EVENT_ID |
- SOFT_GEMINI_SENSE_EVENT_ID;
+ SOFT_GEMINI_SENSE_EVENT_ID |
+ PERIODIC_SCAN_REPORT_EVENT_ID |
+ PERIODIC_SCAN_COMPLETE_EVENT_ID;
if (wl->bss_type == BSS_TYPE_AP_BSS)
wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
+ else
+ wl->event_mask |= DUMMY_PACKET_EVENT_ID;
ret = wl1271_event_unmask(wl);
if (ret < 0) {
@@ -493,24 +525,159 @@
wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
}
-/* uploads NVS and firmware */
-int wl1271_load_firmware(struct wl1271 *wl)
+static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
{
- int ret = 0;
- u32 tmp, clk, pause;
+ u16 spare_reg;
+
+ /* Mask bits [2] & [8:4] in the sys_clk_cfg register */
+ spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+ if (spare_reg == 0xFFFF)
+ return -EFAULT;
+ spare_reg |= (BIT(3) | BIT(5) | BIT(6));
+ wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+ /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
+ wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
+ WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+
+ /* Delay execution for 15msec, to let the HW settle */
+ mdelay(15);
+
+ return 0;
+}
+
+static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
+{
+ u16 tcxo_detection;
+
+ tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG);
+ if (tcxo_detection & TCXO_DET_FAILED)
+ return false;
+
+ return true;
+}
+
+static bool wl128x_is_fref_valid(struct wl1271 *wl)
+{
+ u16 fref_detection;
+
+ fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG);
+ if (fref_detection & FREF_CLK_DETECT_FAIL)
+ return false;
+
+ return true;
+}
+
+static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
+{
+ wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+ wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+ wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
+
+ return 0;
+}
+
+static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
+{
+ u16 spare_reg;
+ u16 pll_config;
+ u8 input_freq;
+
+ /* Mask bits [3:1] in the sys_clk_cfg register */
+ spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+ if (spare_reg == 0xFFFF)
+ return -EFAULT;
+ spare_reg |= BIT(2);
+ wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+ /* Handle special cases of the TCXO clock */
+ if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+ wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+ return wl128x_manually_configure_mcs_pll(wl);
+
+ /* Set the input frequency according to the selected clock source */
+ input_freq = (clk & 1) + 1;
+
+ pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+ if (pll_config == 0xFFFF)
+ return -EFAULT;
+ pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
+ pll_config |= MCS_PLL_ENABLE_HP;
+ wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
+
+ return 0;
+}
+
+/*
+ * WL128x has two clocks input - TCXO and FREF.
+ * TCXO is the main clock of the device, while FREF is used to sync
+ * between the GPS and the cellular modem.
+ * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
+ * as the WLAN/BT main clock.
+ */
+static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
+{
+ u16 sys_clk_cfg;
+
+ /* For XTAL-only modes, FREF will be used after switching from TCXO */
+ if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+ wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+ if (!wl128x_switch_tcxo_to_fref(wl))
+ return -EINVAL;
+ goto fref_clk;
+ }
+
+ /* Query the HW, to determine which clock source we should use */
+ sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+ if (sys_clk_cfg == 0xFFFF)
+ return -EINVAL;
+ if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
+ goto fref_clk;
+
+ /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
+ if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+ wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+ if (!wl128x_switch_tcxo_to_fref(wl))
+ return -EINVAL;
+ goto fref_clk;
+ }
+
+ /* TCXO clock is selected */
+ if (!wl128x_is_tcxo_valid(wl))
+ return -EINVAL;
+ *selected_clock = wl->tcxo_clock;
+ goto config_mcs_pll;
+
+fref_clk:
+ /* FREF clock is selected */
+ if (!wl128x_is_fref_valid(wl))
+ return -EINVAL;
+ *selected_clock = wl->ref_clock;
+
+config_mcs_pll:
+ return wl128x_configure_mcs_pll(wl, *selected_clock);
+}
+
+static int wl127x_boot_clk(struct wl1271 *wl)
+{
+ u32 pause;
+ u32 clk;
wl1271_boot_hw_version(wl);
- if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4)
+ if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
+ wl->ref_clock == CONF_REF_CLK_38_4_E ||
+ wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
/* ref clk: 19.2/38.4/38.4-XTAL */
clk = 0x3;
- else if (wl->ref_clock == 1 || wl->ref_clock == 3)
+ else if (wl->ref_clock == CONF_REF_CLK_26_E ||
+ wl->ref_clock == CONF_REF_CLK_52_E)
/* ref clk: 26/52 */
clk = 0x5;
else
return -EINVAL;
- if (wl->ref_clock != 0) {
+ if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
u16 val;
/* Set clock type (open drain) */
val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
@@ -540,6 +707,26 @@
pause |= WU_COUNTER_PAUSE_VAL;
wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
+ return 0;
+}
+
+/* uploads NVS and firmware */
+int wl1271_load_firmware(struct wl1271 *wl)
+{
+ int ret = 0;
+ u32 tmp, clk;
+ int selected_clock = -1;
+
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ ret = wl128x_boot_clk(wl, &selected_clock);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = wl127x_boot_clk(wl);
+ if (ret < 0)
+ goto out;
+ }
+
/* Continue the ELP wake up sequence */
wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
udelay(500);
@@ -555,7 +742,12 @@
wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
- clk |= (wl->ref_clock << 1) << 4;
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ clk |= ((selected_clock & 0x3) << 1) << 4;
+ } else {
+ clk |= (wl->ref_clock << 1) << 4;
+ }
+
wl1271_write32(wl, DRPW_SCRATCH_START, clk);
wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -585,16 +777,12 @@
/* 6. read the EEPROM parameters */
tmp = wl1271_read32(wl, SCR_PAD2);
- ret = wl1271_boot_write_irq_polarity(wl);
- if (ret < 0)
- goto out;
-
- wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
- WL1271_ACX_ALL_EVENTS_VECTOR);
-
/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
* to upload_fw) */
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ wl1271_top_reg_write(wl, SDIO_IO_DS, wl->conf.hci_io_ds);
+
ret = wl1271_boot_upload_firmware(wl);
if (ret < 0)
goto out;
@@ -618,6 +806,13 @@
if (ret < 0)
goto out;
+ ret = wl1271_boot_write_irq_polarity(wl);
+ if (ret < 0)
+ goto out;
+
+ wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+ WL1271_ACX_ALL_EVENTS_VECTOR);
+
/* Enable firmware interrupts now */
wl1271_boot_enable_interrupts(wl);
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
index 17229b8..e8f8255 100644
--- a/drivers/net/wireless/wl12xx/boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -74,4 +74,56 @@
#define FREF_CLK_POLARITY_BITS 0xfffff8ff
#define CLK_REQ_OUTN_SEL 0x700
+/* PLL configuration algorithm for wl128x */
+#define SYS_CLK_CFG_REG 0x2200
+/* Bit[0] - 0-TCXO, 1-FREF */
+#define MCS_PLL_CLK_SEL_FREF BIT(0)
+/* Bit[3:2] - 01-TCXO, 10-FREF */
+#define WL_CLK_REQ_TYPE_FREF BIT(3)
+#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2))
+/* Bit[4] - 0-TCXO, 1-FREF */
+#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4)
+
+#define TCXO_ILOAD_INT_REG 0x2264
+#define TCXO_CLK_DETECT_REG 0x2266
+
+#define TCXO_DET_FAILED BIT(4)
+
+#define FREF_ILOAD_INT_REG 0x2084
+#define FREF_CLK_DETECT_REG 0x2086
+#define FREF_CLK_DETECT_FAIL BIT(4)
+
+/* Use this reg for masking during driver access */
+#define WL_SPARE_REG 0x2320
+#define WL_SPARE_VAL BIT(2)
+/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */
+#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3))
+
+#define PLL_LOCK_COUNTERS_REG 0xD8C
+#define PLL_LOCK_COUNTERS_COEX 0x0F
+#define PLL_LOCK_COUNTERS_MCS 0xF0
+#define MCS_PLL_OVERRIDE_REG 0xD90
+#define MCS_PLL_CONFIG_REG 0xD92
+#define MCS_SEL_IN_FREQ_MASK 0x0070
+#define MCS_SEL_IN_FREQ_SHIFT 4
+#define MCS_PLL_CONFIG_REG_VAL 0x73
+#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1))
+
+#define MCS_PLL_M_REG 0xD94
+#define MCS_PLL_N_REG 0xD96
+#define MCS_PLL_M_REG_VAL 0xC8
+#define MCS_PLL_N_REG_VAL 0x07
+
+#define SDIO_IO_DS 0xd14
+
+/* SDIO/wSPI DS configuration values */
+enum {
+ HCI_IO_DS_8MA = 0,
+ HCI_IO_DS_4MA = 1, /* default */
+ HCI_IO_DS_6MA = 2,
+ HCI_IO_DS_2MA = 3,
+};
+
+/* end PLL configuration algorithm for wl128x */
+
#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 9632433..42935ac 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -76,7 +76,7 @@
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
ret = -ETIMEDOUT;
- goto out;
+ goto fail;
}
poll_count++;
@@ -96,21 +96,25 @@
status = le16_to_cpu(cmd->status);
if (status != CMD_STATUS_SUCCESS) {
wl1271_error("command execute failure %d", status);
- ieee80211_queue_work(wl->hw, &wl->recovery_work);
ret = -EIO;
+ goto fail;
}
wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
WL1271_ACX_INTR_CMD_COMPLETE);
+ return 0;
-out:
+fail:
+ WARN_ON(1);
+ ieee80211_queue_work(wl->hw, &wl->recovery_work);
return ret;
}
int wl1271_cmd_general_parms(struct wl1271 *wl)
{
struct wl1271_general_parms_cmd *gen_parms;
- struct wl1271_ini_general_params *gp = &wl->nvs->general_params;
+ struct wl1271_ini_general_params *gp =
+ &((struct wl1271_nvs_file *)wl->nvs)->general_params;
bool answer = false;
int ret;
@@ -128,6 +132,52 @@
if (gp->tx_bip_fem_auto_detect)
answer = true;
+ /* Override the REF CLK from the NVS with the one from platform data */
+ gen_parms->general_params.ref_clock = wl->ref_clock;
+
+ ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+ if (ret < 0) {
+ wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+ goto out;
+ }
+
+ gp->tx_bip_fem_manufacturer =
+ gen_parms->general_params.tx_bip_fem_manufacturer;
+
+ wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+ answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+ kfree(gen_parms);
+ return ret;
+}
+
+int wl128x_cmd_general_parms(struct wl1271 *wl)
+{
+ struct wl128x_general_parms_cmd *gen_parms;
+ struct wl128x_ini_general_params *gp =
+ &((struct wl128x_nvs_file *)wl->nvs)->general_params;
+ bool answer = false;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+ if (!gen_parms)
+ return -ENOMEM;
+
+ gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+ memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+ if (gp->tx_bip_fem_auto_detect)
+ answer = true;
+
+ /* Replace REF and TCXO CLKs with the ones from platform data */
+ gen_parms->general_params.ref_clock = wl->ref_clock;
+ gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
+
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
if (ret < 0) {
wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
@@ -147,8 +197,9 @@
int wl1271_cmd_radio_parms(struct wl1271 *wl)
{
+ struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
struct wl1271_radio_parms_cmd *radio_parms;
- struct wl1271_ini_general_params *gp = &wl->nvs->general_params;
+ struct wl1271_ini_general_params *gp = &nvs->general_params;
int ret;
if (!wl->nvs)
@@ -161,18 +212,18 @@
radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
/* 2.4GHz parameters */
- memcpy(&radio_parms->static_params_2, &wl->nvs->stat_radio_params_2,
+ memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
sizeof(struct wl1271_ini_band_params_2));
memcpy(&radio_parms->dyn_params_2,
- &wl->nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+ &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
sizeof(struct wl1271_ini_fem_params_2));
/* 5GHz parameters */
memcpy(&radio_parms->static_params_5,
- &wl->nvs->stat_radio_params_5,
+ &nvs->stat_radio_params_5,
sizeof(struct wl1271_ini_band_params_5));
memcpy(&radio_parms->dyn_params_5,
- &wl->nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+ &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
sizeof(struct wl1271_ini_fem_params_5));
wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
@@ -186,6 +237,50 @@
return ret;
}
+int wl128x_cmd_radio_parms(struct wl1271 *wl)
+{
+ struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+ struct wl128x_radio_parms_cmd *radio_parms;
+ struct wl128x_ini_general_params *gp = &nvs->general_params;
+ int ret;
+
+ if (!wl->nvs)
+ return -ENODEV;
+
+ radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+ if (!radio_parms)
+ return -ENOMEM;
+
+ radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+ /* 2.4GHz parameters */
+ memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+ sizeof(struct wl128x_ini_band_params_2));
+ memcpy(&radio_parms->dyn_params_2,
+ &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+ sizeof(struct wl128x_ini_fem_params_2));
+
+ /* 5GHz parameters */
+ memcpy(&radio_parms->static_params_5,
+ &nvs->stat_radio_params_5,
+ sizeof(struct wl128x_ini_band_params_5));
+ memcpy(&radio_parms->dyn_params_5,
+ &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+ sizeof(struct wl128x_ini_fem_params_5));
+
+ radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
+
+ wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+ radio_parms, sizeof(*radio_parms));
+
+ ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+ if (ret < 0)
+ wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+ kfree(radio_parms);
+ return ret;
+}
+
int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
{
struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
index 54c12e7..5cac95d 100644
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -32,7 +32,9 @@
int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
size_t res_len);
int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl128x_cmd_general_parms(struct wl1271 *wl);
int wl1271_cmd_radio_parms(struct wl1271 *wl);
+int wl128x_cmd_radio_parms(struct wl1271 *wl);
int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type);
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
@@ -415,6 +417,21 @@
u8 padding[3];
} __packed;
+struct wl128x_general_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ struct wl128x_ini_general_params general_params;
+
+ u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+ u8 sr_sen_n_p;
+ u8 sr_sen_n_p_gain;
+ u8 sr_sen_nrn;
+ u8 sr_sen_prn;
+ u8 padding[3];
+} __packed;
+
struct wl1271_radio_parms_cmd {
struct wl1271_cmd_header header;
@@ -431,6 +448,23 @@
u8 padding3[2];
} __packed;
+struct wl128x_radio_parms_cmd {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ /* Static radio parameters */
+ struct wl128x_ini_band_params_2 static_params_2;
+ struct wl128x_ini_band_params_5 static_params_5;
+
+ u8 fem_vendor_and_options;
+
+ /* Dynamic radio parameters */
+ struct wl128x_ini_fem_params_2 dyn_params_2;
+ u8 padding2;
+ struct wl128x_ini_fem_params_5 dyn_params_5;
+} __packed;
+
struct wl1271_ext_radio_parms_cmd {
struct wl1271_cmd_header header;
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 8a83238..1ab6c86 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -396,12 +396,43 @@
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
- CONF_SG_PARAMS_MAX,
+
+ /*
+ * AP beacon miss
+ *
+ * Range: 0 - 255
+ */
+ CONF_SG_AP_BEACON_MISS_TX,
+
+ /*
+ * AP RX window length
+ *
+ * Range: 0 - 50
+ */
+ CONF_SG_RX_WINDOW_LENGTH,
+
+ /*
+ * AP connection protection time
+ *
+ * Range: 0 - 5000
+ */
+ CONF_SG_AP_CONNECTION_PROTECTION_TIME,
+
+ CONF_SG_TEMP_PARAM_6,
+ CONF_SG_TEMP_PARAM_7,
+ CONF_SG_TEMP_PARAM_8,
+ CONF_SG_TEMP_PARAM_9,
+ CONF_SG_TEMP_PARAM_10,
+
+ CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
+ CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
+
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
- u32 params[CONF_SG_PARAMS_MAX];
+ u32 sta_params[CONF_SG_STA_PARAMS_MAX];
+ u32 ap_params[CONF_SG_AP_PARAMS_MAX];
u8 state;
};
@@ -509,6 +540,12 @@
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
+#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \
+ CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \
+ CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
+ CONF_HW_BIT_RATE_54MBPS)
+
+
/*
* Default rates for management traffic when operating in AP mode. This
* should be configured according to the basic rate set of the AP
@@ -516,6 +553,13 @@
#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
+/*
+ * Default rates for working as IBSS. use 11b rates
+ */
+#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \
+ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
+ CONF_HW_BIT_RATE_11MBPS);
+
struct conf_tx_rate_class {
/*
@@ -667,22 +711,6 @@
struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
/*
- * Configuration for rate classes in AP-mode. These rate classes
- * are for the AC TX queues
- */
- struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT];
-
- /*
- * Management TX rate class for AP-mode.
- */
- struct conf_tx_rate_class ap_mgmt_conf;
-
- /*
- * Broadcast TX rate class for AP-mode.
- */
- struct conf_tx_rate_class ap_bcst_conf;
-
- /*
* AP-mode - allow this number of TX retries to a station before an
* event is triggered from FW.
*/
@@ -1004,7 +1032,9 @@
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
CONF_REF_CLK_38_4_E,
- CONF_REF_CLK_52_E
+ CONF_REF_CLK_52_E,
+ CONF_REF_CLK_38_4_M_XTAL,
+ CONF_REF_CLK_26_M_XTAL,
};
enum single_dual_band_enum {
@@ -1018,15 +1048,6 @@
#define CONF_NUMBER_OF_CHANNELS_2_4 14
#define CONF_NUMBER_OF_CHANNELS_5 35
-struct conf_radio_parms {
- /*
- * FEM parameter set to use
- *
- * Range: 0 or 1
- */
- u8 fem;
-};
-
struct conf_itrim_settings {
/* enable dco itrim */
u8 enable;
@@ -1126,6 +1147,26 @@
};
+struct conf_sched_scan_settings {
+ /* minimum time to wait on the channel for active scans (in TUs) */
+ u16 min_dwell_time_active;
+
+ /* maximum time to wait on the channel for active scans (in TUs) */
+ u16 max_dwell_time_active;
+
+ /* time to wait on the channel for passive scans (in TUs) */
+ u32 dwell_time_passive;
+
+ /* number of probe requests to send on each channel in active scans */
+ u8 num_probe_reqs;
+
+ /* RSSI threshold to be used for filtering */
+ s8 rssi_threshold;
+
+ /* SNR threshold to be used for filtering */
+ s8 snr_threshold;
+};
+
/* these are number of channels on the band divided by two, rounded up */
#define CONF_TX_PWR_COMPENSATION_LEN_2 7
#define CONF_TX_PWR_COMPENSATION_LEN_5 18
@@ -1191,6 +1232,19 @@
u8 tx_min;
};
+struct conf_fm_coex {
+ u8 enable;
+ u8 swallow_period;
+ u8 n_divider_fref_set_1;
+ u8 n_divider_fref_set_2;
+ u16 m_divider_fref_set_1;
+ u16 m_divider_fref_set_2;
+ u32 coex_pll_stabilization_time;
+ u16 ldo_stabilization_time;
+ u8 fm_disturbed_band_margin;
+ u8 swallow_clk_diff;
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
@@ -1200,9 +1254,13 @@
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
struct conf_scan_settings scan;
+ struct conf_sched_scan_settings sched_scan;
struct conf_rf_settings rf;
struct conf_ht_setting ht;
- struct conf_memory_settings mem;
+ struct conf_memory_settings mem_wl127x;
+ struct conf_memory_settings mem_wl128x;
+ struct conf_fm_coex fm_coex;
+ u8 hci_io_ds;
};
#endif
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 8e75b09..f1f8df9 100644
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -267,7 +267,7 @@
}
buf[len] = '\0';
- ret = strict_strtoul(buf, 0, &value);
+ ret = kstrtoul(buf, 0, &value);
if (ret < 0) {
wl1271_warning("illegal value in gpio_power");
return -EINVAL;
@@ -291,6 +291,242 @@
.llseek = default_llseek,
};
+static ssize_t start_recovery_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+
+ mutex_lock(&wl->mutex);
+ ieee80211_queue_work(wl->hw, &wl->recovery_work);
+ mutex_unlock(&wl->mutex);
+
+ return count;
+}
+
+static const struct file_operations start_recovery_ops = {
+ .write = start_recovery_write,
+ .open = wl1271_open_file_generic,
+ .llseek = default_llseek,
+};
+
+static ssize_t driver_state_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ int res = 0;
+ char buf[1024];
+
+ mutex_lock(&wl->mutex);
+
+#define DRIVER_STATE_PRINT(x, fmt) \
+ (res += scnprintf(buf + res, sizeof(buf) - res,\
+ #x " = " fmt "\n", wl->x))
+
+#define DRIVER_STATE_PRINT_LONG(x) DRIVER_STATE_PRINT(x, "%ld")
+#define DRIVER_STATE_PRINT_INT(x) DRIVER_STATE_PRINT(x, "%d")
+#define DRIVER_STATE_PRINT_STR(x) DRIVER_STATE_PRINT(x, "%s")
+#define DRIVER_STATE_PRINT_LHEX(x) DRIVER_STATE_PRINT(x, "0x%lx")
+#define DRIVER_STATE_PRINT_HEX(x) DRIVER_STATE_PRINT(x, "0x%x")
+
+ DRIVER_STATE_PRINT_INT(tx_blocks_available);
+ DRIVER_STATE_PRINT_INT(tx_allocated_blocks);
+ DRIVER_STATE_PRINT_INT(tx_frames_cnt);
+ DRIVER_STATE_PRINT_LHEX(tx_frames_map[0]);
+ DRIVER_STATE_PRINT_INT(tx_queue_count);
+ DRIVER_STATE_PRINT_INT(tx_packets_count);
+ DRIVER_STATE_PRINT_INT(tx_results_count);
+ DRIVER_STATE_PRINT_LHEX(flags);
+ DRIVER_STATE_PRINT_INT(tx_blocks_freed[0]);
+ DRIVER_STATE_PRINT_INT(tx_blocks_freed[1]);
+ DRIVER_STATE_PRINT_INT(tx_blocks_freed[2]);
+ DRIVER_STATE_PRINT_INT(tx_blocks_freed[3]);
+ DRIVER_STATE_PRINT_INT(tx_security_last_seq);
+ DRIVER_STATE_PRINT_INT(rx_counter);
+ DRIVER_STATE_PRINT_INT(session_counter);
+ DRIVER_STATE_PRINT_INT(state);
+ DRIVER_STATE_PRINT_INT(bss_type);
+ DRIVER_STATE_PRINT_INT(channel);
+ DRIVER_STATE_PRINT_HEX(rate_set);
+ DRIVER_STATE_PRINT_HEX(basic_rate_set);
+ DRIVER_STATE_PRINT_HEX(basic_rate);
+ DRIVER_STATE_PRINT_INT(band);
+ DRIVER_STATE_PRINT_INT(beacon_int);
+ DRIVER_STATE_PRINT_INT(psm_entry_retry);
+ DRIVER_STATE_PRINT_INT(ps_poll_failures);
+ DRIVER_STATE_PRINT_HEX(filters);
+ DRIVER_STATE_PRINT_HEX(rx_config);
+ DRIVER_STATE_PRINT_HEX(rx_filter);
+ DRIVER_STATE_PRINT_INT(power_level);
+ DRIVER_STATE_PRINT_INT(rssi_thold);
+ DRIVER_STATE_PRINT_INT(last_rssi_event);
+ DRIVER_STATE_PRINT_INT(sg_enabled);
+ DRIVER_STATE_PRINT_INT(enable_11a);
+ DRIVER_STATE_PRINT_INT(noise);
+ DRIVER_STATE_PRINT_LHEX(ap_hlid_map[0]);
+ DRIVER_STATE_PRINT_INT(last_tx_hlid);
+ DRIVER_STATE_PRINT_INT(ba_support);
+ DRIVER_STATE_PRINT_HEX(ba_rx_bitmap);
+ DRIVER_STATE_PRINT_HEX(ap_fw_ps_map);
+ DRIVER_STATE_PRINT_LHEX(ap_ps_map);
+ DRIVER_STATE_PRINT_HEX(quirks);
+ DRIVER_STATE_PRINT_HEX(irq);
+ DRIVER_STATE_PRINT_HEX(ref_clock);
+ DRIVER_STATE_PRINT_HEX(tcxo_clock);
+ DRIVER_STATE_PRINT_HEX(hw_pg_ver);
+ DRIVER_STATE_PRINT_HEX(platform_quirks);
+ DRIVER_STATE_PRINT_HEX(chip.id);
+ DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
+ DRIVER_STATE_PRINT_INT(sched_scanning);
+
+#undef DRIVER_STATE_PRINT_INT
+#undef DRIVER_STATE_PRINT_LONG
+#undef DRIVER_STATE_PRINT_HEX
+#undef DRIVER_STATE_PRINT_LHEX
+#undef DRIVER_STATE_PRINT_STR
+#undef DRIVER_STATE_PRINT
+
+ mutex_unlock(&wl->mutex);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static const struct file_operations driver_state_ops = {
+ .read = driver_state_read,
+ .open = wl1271_open_file_generic,
+ .llseek = default_llseek,
+};
+
+static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ u8 value;
+
+ if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_DTIM ||
+ wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_DTIM)
+ value = wl->conf.conn.listen_interval;
+ else
+ value = 0;
+
+ return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t dtim_interval_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ char buf[10];
+ size_t len;
+ unsigned long value;
+ int ret;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+ buf[len] = '\0';
+
+ ret = kstrtoul(buf, 0, &value);
+ if (ret < 0) {
+ wl1271_warning("illegal value for dtim_interval");
+ return -EINVAL;
+ }
+
+ if (value < 1 || value > 10) {
+ wl1271_warning("dtim value is not in valid range");
+ return -ERANGE;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ wl->conf.conn.listen_interval = value;
+ /* for some reason there are different event types for 1 and >1 */
+ if (value == 1)
+ wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_DTIM;
+ else
+ wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM;
+
+ /*
+ * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+ * take effect on the next time we enter psm.
+ */
+ mutex_unlock(&wl->mutex);
+ return count;
+}
+
+static const struct file_operations dtim_interval_ops = {
+ .read = dtim_interval_read,
+ .write = dtim_interval_write,
+ .open = wl1271_open_file_generic,
+ .llseek = default_llseek,
+};
+
+static ssize_t beacon_interval_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ u8 value;
+
+ if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_BEACON ||
+ wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_BEACONS)
+ value = wl->conf.conn.listen_interval;
+ else
+ value = 0;
+
+ return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t beacon_interval_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ char buf[10];
+ size_t len;
+ unsigned long value;
+ int ret;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+ buf[len] = '\0';
+
+ ret = kstrtoul(buf, 0, &value);
+ if (ret < 0) {
+ wl1271_warning("illegal value for beacon_interval");
+ return -EINVAL;
+ }
+
+ if (value < 1 || value > 255) {
+ wl1271_warning("beacon interval value is not in valid range");
+ return -ERANGE;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ wl->conf.conn.listen_interval = value;
+ /* for some reason there are different event types for 1 and >1 */
+ if (value == 1)
+ wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_BEACON;
+ else
+ wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_BEACONS;
+
+ /*
+ * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+ * take effect on the next time we enter psm.
+ */
+ mutex_unlock(&wl->mutex);
+ return count;
+}
+
+static const struct file_operations beacon_interval_ops = {
+ .read = beacon_interval_read,
+ .write = beacon_interval_write,
+ .open = wl1271_open_file_generic,
+ .llseek = default_llseek,
+};
+
static int wl1271_debugfs_add_files(struct wl1271 *wl,
struct dentry *rootdir)
{
@@ -399,6 +635,10 @@
DEBUGFS_ADD(excessive_retries, rootdir);
DEBUGFS_ADD(gpio_power, rootdir);
+ DEBUGFS_ADD(start_recovery, rootdir);
+ DEBUGFS_ADD(driver_state, rootdir);
+ DEBUGFS_ADD(dtim_interval, rootdir);
+ DEBUGFS_ADD(beacon_interval, rootdir);
return 0;
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
index 1b170c5..c3c554c 100644
--- a/drivers/net/wireless/wl12xx/event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -33,6 +33,7 @@
{
struct delayed_work *dwork;
struct wl1271 *wl;
+ int ret;
dwork = container_of(work, struct delayed_work, work);
wl = container_of(dwork, struct wl1271, pspoll_work);
@@ -55,8 +56,13 @@
* delivery failure occurred, and no-one changed state since, so
* we should go back to powersave.
*/
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true);
+ wl1271_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
};
@@ -132,8 +138,10 @@
if (ret < 0)
break;
- /* go to extremely low power mode */
- wl1271_ps_elp_sleep(wl);
+ if (wl->ps_compl) {
+ complete(wl->ps_compl);
+ wl->ps_compl = NULL;
+ }
break;
default:
break;
@@ -187,6 +195,22 @@
wl1271_scan_stm(wl);
}
+ if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
+ wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT "
+ "(status 0x%0x)", mbox->scheduled_scan_status);
+
+ wl1271_scan_sched_scan_results(wl);
+ }
+
+ if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) {
+ wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT "
+ "(status 0x%0x)", mbox->scheduled_scan_status);
+ if (wl->sched_scanning) {
+ wl1271_scan_sched_scan_stop(wl);
+ ieee80211_sched_scan_stopped(wl->hw);
+ }
+ }
+
/* disable dynamic PS when requested by the firmware */
if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
wl->bss_type == BSS_TYPE_STA_BSS) {
@@ -228,6 +252,12 @@
wl1271_event_rssi_trigger(wl, mbox);
}
+ if ((vector & DUMMY_PACKET_EVENT_ID) && !is_ap) {
+ wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
+ if (wl->vif)
+ wl1271_tx_dummy_packet(wl);
+ }
+
if (wl->vif && beacon_loss)
ieee80211_connection_loss(wl->vif);
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
index 0e80886..b6cf06e 100644
--- a/drivers/net/wireless/wl12xx/event.h
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -59,7 +59,10 @@
BSS_LOSE_EVENT_ID = BIT(18),
REGAINED_BSS_EVENT_ID = BIT(19),
ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(20),
- STA_REMOVE_COMPLETE_EVENT_ID = BIT(21), /* AP */
+ /* STA: dummy paket for dynamic mem blocks */
+ DUMMY_PACKET_EVENT_ID = BIT(21),
+ /* AP: STA remove complete */
+ STA_REMOVE_COMPLETE_EVENT_ID = BIT(21),
SOFT_GEMINI_SENSE_EVENT_ID = BIT(22),
SOFT_GEMINI_PREDICTION_EVENT_ID = BIT(23),
SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24),
diff --git a/drivers/net/wireless/wl12xx/ini.h b/drivers/net/wireless/wl12xx/ini.h
index c330a25..1420c84 100644
--- a/drivers/net/wireless/wl12xx/ini.h
+++ b/drivers/net/wireless/wl12xx/ini.h
@@ -41,6 +41,28 @@
u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM];
} __packed;
+#define WL128X_INI_MAX_SETTINGS_PARAM 4
+
+struct wl128x_ini_general_params {
+ u8 ref_clock;
+ u8 settling_time;
+ u8 clk_valid_on_wakeup;
+ u8 tcxo_ref_clock;
+ u8 tcxo_settling_time;
+ u8 tcxo_valid_on_wakeup;
+ u8 tcxo_ldo_voltage;
+ u8 xtal_itrim_val;
+ u8 platform_conf;
+ u8 dual_mode_select;
+ u8 tx_bip_fem_auto_detect;
+ u8 tx_bip_fem_manufacturer;
+ u8 general_settings[WL128X_INI_MAX_SETTINGS_PARAM];
+ u8 sr_state;
+ u8 srf1[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+ u8 srf2[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+ u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+} __packed;
+
#define WL1271_INI_RSSI_PROCESS_COMPENS_SIZE 15
struct wl1271_ini_band_params_2 {
@@ -49,9 +71,16 @@
u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
} __packed;
-#define WL1271_INI_RATE_GROUP_COUNT 6
#define WL1271_INI_CHANNEL_COUNT_2 14
+struct wl128x_ini_band_params_2 {
+ u8 rx_trace_insertion_loss;
+ u8 tx_trace_loss[WL1271_INI_CHANNEL_COUNT_2];
+ u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
+} __packed;
+
+#define WL1271_INI_RATE_GROUP_COUNT 6
+
struct wl1271_ini_fem_params_2 {
__le16 tx_bip_ref_pd_voltage;
u8 tx_bip_ref_power;
@@ -68,6 +97,28 @@
u8 normal_to_degraded_high_thr;
} __packed;
+#define WL128X_INI_RATE_GROUP_COUNT 7
+/* low and high temperatures */
+#define WL128X_INI_PD_VS_TEMPERATURE_RANGES 2
+
+struct wl128x_ini_fem_params_2 {
+ __le16 tx_bip_ref_pd_voltage;
+ u8 tx_bip_ref_power;
+ u8 tx_bip_ref_offset;
+ u8 tx_per_rate_pwr_limits_normal[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_per_rate_pwr_limits_degraded[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_per_rate_pwr_limits_extreme[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_per_chan_pwr_limits_11b[WL1271_INI_CHANNEL_COUNT_2];
+ u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_2];
+ u8 tx_pd_vs_rate_offsets[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_ibias[WL128X_INI_RATE_GROUP_COUNT + 1];
+ u8 tx_pd_vs_chan_offsets[WL1271_INI_CHANNEL_COUNT_2];
+ u8 tx_pd_vs_temperature[WL128X_INI_PD_VS_TEMPERATURE_RANGES];
+ u8 rx_fem_insertion_loss;
+ u8 degraded_low_to_normal_thr;
+ u8 normal_to_degraded_high_thr;
+} __packed;
+
#define WL1271_INI_CHANNEL_COUNT_5 35
#define WL1271_INI_SUB_BAND_COUNT_5 7
@@ -77,6 +128,12 @@
u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
} __packed;
+struct wl128x_ini_band_params_5 {
+ u8 rx_trace_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5];
+ u8 tx_trace_loss[WL1271_INI_CHANNEL_COUNT_5];
+ u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
+} __packed;
+
struct wl1271_ini_fem_params_5 {
__le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5];
u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5];
@@ -92,6 +149,23 @@
u8 normal_to_degraded_high_thr;
} __packed;
+struct wl128x_ini_fem_params_5 {
+ __le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5];
+ u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5];
+ u8 tx_bip_ref_offset[WL1271_INI_SUB_BAND_COUNT_5];
+ u8 tx_per_rate_pwr_limits_normal[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_per_rate_pwr_limits_degraded[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_per_rate_pwr_limits_extreme[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_5];
+ u8 tx_pd_vs_rate_offsets[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_ibias[WL128X_INI_RATE_GROUP_COUNT];
+ u8 tx_pd_vs_chan_offsets[WL1271_INI_CHANNEL_COUNT_5];
+ u8 tx_pd_vs_temperature[WL1271_INI_SUB_BAND_COUNT_5 *
+ WL128X_INI_PD_VS_TEMPERATURE_RANGES];
+ u8 rx_fem_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5];
+ u8 degraded_low_to_normal_thr;
+ u8 normal_to_degraded_high_thr;
+} __packed;
/* NVS data structure */
#define WL1271_INI_NVS_SECTION_SIZE 468
@@ -100,7 +174,7 @@
#define WL1271_INI_LEGACY_NVS_FILE_SIZE 800
struct wl1271_nvs_file {
- /* NVS section */
+ /* NVS section - must be first! */
u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
/* INI section */
@@ -120,4 +194,24 @@
} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
} __packed;
+struct wl128x_nvs_file {
+ /* NVS section - must be first! */
+ u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
+
+ /* INI section */
+ struct wl128x_ini_general_params general_params;
+ u8 fem_vendor_and_options;
+ struct wl128x_ini_band_params_2 stat_radio_params_2;
+ u8 padding2;
+ struct {
+ struct wl128x_ini_fem_params_2 params;
+ u8 padding;
+ } dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT];
+ struct wl128x_ini_band_params_5 stat_radio_params_5;
+ u8 padding3;
+ struct {
+ struct wl128x_ini_fem_params_5 params;
+ u8 padding;
+ } dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
+} __packed;
#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 6072fe4..a8f4f15 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -31,6 +31,7 @@
#include "cmd.h"
#include "reg.h"
#include "tx.h"
+#include "io.h"
int wl1271_sta_init_templates_config(struct wl1271 *wl)
{
@@ -257,7 +258,7 @@
if (ret < 0)
return ret;
- ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold);
+ ret = wl1271_acx_rts_threshold(wl, wl->hw->wiphy->rts_threshold);
if (ret < 0)
return ret;
@@ -284,7 +285,10 @@
{
int ret;
- ret = wl1271_acx_sg_cfg(wl);
+ if (wl->bss_type == BSS_TYPE_AP_BSS)
+ ret = wl1271_acx_ap_sg_cfg(wl);
+ else
+ ret = wl1271_acx_sta_sg_cfg(wl);
if (ret < 0)
return ret;
@@ -321,9 +325,11 @@
{
int ret;
- ret = wl1271_cmd_ext_radio_parms(wl);
- if (ret < 0)
- return ret;
+ if (wl->chip.id != CHIP_ID_1283_PG20) {
+ ret = wl1271_cmd_ext_radio_parms(wl);
+ if (ret < 0)
+ return ret;
+ }
/* PS config */
ret = wl1271_acx_config_ps(wl);
@@ -348,8 +354,8 @@
if (ret < 0)
return ret;
- /* Bluetooth WLAN coexistence */
- ret = wl1271_init_pta(wl);
+ /* FM WLAN coexistence */
+ ret = wl1271_acx_fm_coex(wl);
if (ret < 0)
return ret;
@@ -407,7 +413,7 @@
static int wl1271_ap_hw_init(struct wl1271 *wl)
{
- int ret, i;
+ int ret;
ret = wl1271_ap_init_templates_config(wl);
if (ret < 0)
@@ -418,23 +424,7 @@
if (ret < 0)
return ret;
- /* Configure initial TX rate classes */
- for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
- ret = wl1271_acx_ap_rate_policy(wl,
- &wl->conf.tx.ap_rc_conf[i], i);
- if (ret < 0)
- return ret;
- }
-
- ret = wl1271_acx_ap_rate_policy(wl,
- &wl->conf.tx.ap_mgmt_conf,
- ACX_TX_AP_MODE_MGMT_RATE);
- if (ret < 0)
- return ret;
-
- ret = wl1271_acx_ap_rate_policy(wl,
- &wl->conf.tx.ap_bcst_conf,
- ACX_TX_AP_MODE_BCST_RATE);
+ ret = wl1271_init_ap_rates(wl);
if (ret < 0)
return ret;
@@ -449,7 +439,7 @@
return 0;
}
-static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
+int wl1271_ap_init_templates(struct wl1271 *wl)
{
int ret;
@@ -465,6 +455,70 @@
if (ret < 0)
return ret;
+ /*
+ * when operating as AP we want to receive external beacons for
+ * configuring ERP protection.
+ */
+ ret = wl1271_acx_set_ap_beacon_filter(wl, false);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_ap_hw_init_post_mem(struct wl1271 *wl)
+{
+ return wl1271_ap_init_templates(wl);
+}
+
+int wl1271_init_ap_rates(struct wl1271 *wl)
+{
+ int i, ret;
+ struct conf_tx_rate_class rc;
+ u32 supported_rates;
+
+ wl1271_debug(DEBUG_AP, "AP basic rate set: 0x%x", wl->basic_rate_set);
+
+ if (wl->basic_rate_set == 0)
+ return -EINVAL;
+
+ rc.enabled_rates = wl->basic_rate_set;
+ rc.long_retry_limit = 10;
+ rc.short_retry_limit = 10;
+ rc.aflags = 0;
+ ret = wl1271_acx_ap_rate_policy(wl, &rc, ACX_TX_AP_MODE_MGMT_RATE);
+ if (ret < 0)
+ return ret;
+
+ /* use the min basic rate for AP broadcast/multicast */
+ rc.enabled_rates = wl1271_tx_min_rate_get(wl);
+ rc.short_retry_limit = 10;
+ rc.long_retry_limit = 10;
+ rc.aflags = 0;
+ ret = wl1271_acx_ap_rate_policy(wl, &rc, ACX_TX_AP_MODE_BCST_RATE);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * If the basic rates contain OFDM rates, use OFDM only
+ * rates for unicast TX as well. Else use all supported rates.
+ */
+ if ((wl->basic_rate_set & CONF_TX_OFDM_RATES))
+ supported_rates = CONF_TX_OFDM_RATES;
+ else
+ supported_rates = CONF_TX_AP_ENABLED_RATES;
+
+ /* configure unicast TX rate classes */
+ for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+ rc.enabled_rates = supported_rates;
+ rc.short_retry_limit = 10;
+ rc.long_retry_limit = 10;
+ rc.aflags = 0;
+ ret = wl1271_acx_ap_rate_policy(wl, &rc, i);
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}
@@ -504,6 +558,27 @@
return ret;
}
+int wl1271_chip_specific_init(struct wl1271 *wl)
+{
+ int ret = 0;
+
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
+
+ if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT)
+ /* Enable SDIO padding */
+ host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
+
+ /* Must be before wl1271_acx_init_mem_config() */
+ ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
+ if (ret < 0)
+ goto out;
+ }
+out:
+ return ret;
+}
+
+
int wl1271_hw_init(struct wl1271 *wl)
{
struct conf_tx_ac_category *conf_ac;
@@ -511,11 +586,22 @@
int ret, i;
bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
- ret = wl1271_cmd_general_parms(wl);
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ ret = wl128x_cmd_general_parms(wl);
+ else
+ ret = wl1271_cmd_general_parms(wl);
if (ret < 0)
return ret;
- ret = wl1271_cmd_radio_parms(wl);
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ ret = wl128x_cmd_radio_parms(wl);
+ else
+ ret = wl1271_cmd_radio_parms(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Chip-specific init */
+ ret = wl1271_chip_specific_init(wl);
if (ret < 0)
return ret;
@@ -528,6 +614,11 @@
if (ret < 0)
return ret;
+ /* Bluetooth WLAN coexistence */
+ ret = wl1271_init_pta(wl);
+ if (ret < 0)
+ return ret;
+
/* Default memory configuration */
ret = wl1271_acx_init_mem_config(wl);
if (ret < 0)
@@ -567,7 +658,7 @@
goto out_free_memmap;
/* Default fragmentation threshold */
- ret = wl1271_acx_frag_threshold(wl, wl->conf.tx.frag_threshold);
+ ret = wl1271_acx_frag_threshold(wl, wl->hw->wiphy->frag_threshold);
if (ret < 0)
goto out_free_memmap;
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
index 3a8bd3f..3a3c230 100644
--- a/drivers/net/wireless/wl12xx/init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -31,6 +31,9 @@
int wl1271_init_phy_config(struct wl1271 *wl);
int wl1271_init_pta(struct wl1271 *wl);
int wl1271_init_energy_detection(struct wl1271 *wl);
+int wl1271_chip_specific_init(struct wl1271 *wl);
int wl1271_hw_init(struct wl1271 *wl);
+int wl1271_init_ap_rates(struct wl1271 *wl);
+int wl1271_ap_init_templates(struct wl1271 *wl);
#endif
diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c
index d557f73..da5c1ad 100644
--- a/drivers/net/wireless/wl12xx/io.c
+++ b/drivers/net/wireless/wl12xx/io.c
@@ -29,6 +29,7 @@
#include "wl12xx.h"
#include "wl12xx_80211.h"
#include "io.h"
+#include "tx.h"
#define OCP_CMD_LOOP 32
@@ -43,6 +44,16 @@
#define OCP_STATUS_REQ_FAILED 0x20000
#define OCP_STATUS_RESP_ERROR 0x30000
+bool wl1271_set_block_size(struct wl1271 *wl)
+{
+ if (wl->if_ops->set_block_size) {
+ wl->if_ops->set_block_size(wl, WL12XX_BUS_BLOCK_SIZE);
+ return true;
+ }
+
+ return false;
+}
+
void wl1271_disable_interrupts(struct wl1271 *wl)
{
wl->if_ops->disable_irq(wl);
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index 00c771e..beed621 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -169,5 +169,8 @@
struct ieee80211_hw *wl1271_alloc_hw(void);
int wl1271_free_hw(struct wl1271 *wl);
irqreturn_t wl1271_irq(int irq, void *data);
+bool wl1271_set_block_size(struct wl1271 *wl);
+int wl1271_tx_dummy_packet(struct wl1271 *wl);
+void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters);
#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 8b3c8d1..bc00e52 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -30,6 +30,7 @@
#include <linux/vmalloc.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/wl12xx.h>
#include "wl12xx.h"
#include "wl12xx_80211.h"
@@ -50,11 +51,11 @@
static struct conf_drv_settings default_conf = {
.sg = {
- .params = {
+ .sta_params = {
[CONF_SG_BT_PER_THRESHOLD] = 7500,
[CONF_SG_HV3_MAX_OVERRIDE] = 0,
[CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
- [CONF_SG_BT_LOAD_RATIO] = 50,
+ [CONF_SG_BT_LOAD_RATIO] = 200,
[CONF_SG_AUTO_PS_MODE] = 1,
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
@@ -100,6 +101,61 @@
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
},
+ .ap_params = {
+ [CONF_SG_BT_PER_THRESHOLD] = 7500,
+ [CONF_SG_HV3_MAX_OVERRIDE] = 0,
+ [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
+ [CONF_SG_BT_LOAD_RATIO] = 50,
+ [CONF_SG_AUTO_PS_MODE] = 1,
+ [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
+ [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
+ [CONF_SG_ANTENNA_CONFIGURATION] = 0,
+ [CONF_SG_BEACON_MISS_PERCENT] = 60,
+ [CONF_SG_RATE_ADAPT_THRESH] = 64,
+ [CONF_SG_RATE_ADAPT_SNR] = 1,
+ [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10,
+ [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 25,
+ [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 25,
+ [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20,
+ [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 25,
+ [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 25,
+ [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7,
+ [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25,
+ [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 25,
+ [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8,
+ [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 25,
+ [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 25,
+ [CONF_SG_RXT] = 1200,
+ [CONF_SG_TXT] = 1000,
+ [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
+ [CONF_SG_PS_POLL_TIMEOUT] = 10,
+ [CONF_SG_UPSD_TIMEOUT] = 10,
+ [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
+ [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
+ [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
+ [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8,
+ [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20,
+ [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15,
+ [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20,
+ [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50,
+ [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10,
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
+ [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75,
+ [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15,
+ [CONF_SG_HV3_MAX_SERVED] = 6,
+ [CONF_SG_DHCP_TIME] = 5000,
+ [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
+ [CONF_SG_TEMP_PARAM_1] = 0,
+ [CONF_SG_TEMP_PARAM_2] = 0,
+ [CONF_SG_TEMP_PARAM_3] = 0,
+ [CONF_SG_TEMP_PARAM_4] = 0,
+ [CONF_SG_TEMP_PARAM_5] = 0,
+ [CONF_SG_AP_BEACON_MISS_TX] = 3,
+ [CONF_SG_RX_WINDOW_LENGTH] = 6,
+ [CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 50,
+ [CONF_SG_TEMP_PARAM_6] = 1,
+ },
.state = CONF_SG_PROTECTIVE,
},
.rx = {
@@ -107,7 +163,7 @@
.packet_detection_threshold = 0,
.ps_poll_timeout = 15,
.upsd_timeout = 15,
- .rts_threshold = 2347,
+ .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD,
.rx_cca_threshold = 0,
.irq_blk_threshold = 0xFFFF,
.irq_pkt_threshold = 0,
@@ -153,44 +209,6 @@
.tx_op_limit = 1504,
},
},
- .ap_rc_conf = {
- [0] = {
- .enabled_rates = CONF_TX_AP_ENABLED_RATES,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
- [1] = {
- .enabled_rates = CONF_TX_AP_ENABLED_RATES,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
- [2] = {
- .enabled_rates = CONF_TX_AP_ENABLED_RATES,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
- [3] = {
- .enabled_rates = CONF_TX_AP_ENABLED_RATES,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
- },
- .ap_mgmt_conf = {
- .enabled_rates = CONF_TX_AP_DEFAULT_MGMT_RATES,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
- .ap_bcst_conf = {
- .enabled_rates = CONF_HW_BIT_RATE_1MBPS,
- .short_retry_limit = 10,
- .long_retry_limit = 10,
- .aflags = 0,
- },
.ap_max_tx_retries = 100,
.tid_conf_count = 4,
.tid_conf = {
@@ -239,12 +257,16 @@
.wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
.listen_interval = 1,
.bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED,
- .bcn_filt_ie_count = 1,
+ .bcn_filt_ie_count = 2,
.bcn_filt_ie = {
[0] = {
.ie = WLAN_EID_CHANNEL_SWITCH,
.rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
- }
+ },
+ [1] = {
+ .ie = WLAN_EID_HT_INFORMATION,
+ .rule = CONF_BCN_RULE_PASS_ON_CHANGE,
+ },
},
.synch_fail_thold = 10,
.bss_lose_timeout = 100,
@@ -254,9 +276,9 @@
.ps_poll_threshold = 10,
.ps_poll_recovery_period = 700,
.bet_enable = CONF_BET_MODE_ENABLE,
- .bet_max_consecutive = 10,
+ .bet_max_consecutive = 50,
.psm_entry_retries = 5,
- .psm_exit_retries = 255,
+ .psm_exit_retries = 16,
.psm_entry_nullfunc_retries = 3,
.psm_entry_hangover_period = 1,
.keep_alive_interval = 55000,
@@ -284,6 +306,15 @@
.max_dwell_time_passive = 100000,
.num_probe_reqs = 2,
},
+ .sched_scan = {
+ /* sched_scan requires dwell times in TU instead of TU/1000 */
+ .min_dwell_time_active = 8,
+ .max_dwell_time_active = 30,
+ .dwell_time_passive = 100,
+ .num_probe_reqs = 2,
+ .rssi_threshold = -90,
+ .snr_threshold = 0,
+ },
.rf = {
.tx_per_channel_power_compensation_2 = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -298,19 +329,43 @@
.tx_ba_win_size = 64,
.inactivity_timeout = 10000,
},
- .mem = {
+ .mem_wl127x = {
.num_stations = 1,
.ssid_profiles = 1,
.rx_block_num = 70,
.tx_min_block_num = 40,
- .dynamic_memory = 0,
+ .dynamic_memory = 1,
.min_req_tx_blocks = 100,
.min_req_rx_blocks = 22,
.tx_min = 27,
- }
+ },
+ .mem_wl128x = {
+ .num_stations = 1,
+ .ssid_profiles = 1,
+ .rx_block_num = 40,
+ .tx_min_block_num = 40,
+ .dynamic_memory = 1,
+ .min_req_tx_blocks = 45,
+ .min_req_rx_blocks = 22,
+ .tx_min = 27,
+ },
+ .fm_coex = {
+ .enable = true,
+ .swallow_period = 5,
+ .n_divider_fref_set_1 = 0xff, /* default */
+ .n_divider_fref_set_2 = 12,
+ .m_divider_fref_set_1 = 148,
+ .m_divider_fref_set_2 = 0xffff, /* default */
+ .coex_pll_stabilization_time = 0xffffffff, /* default */
+ .ldo_stabilization_time = 0xffff, /* default */
+ .fm_disturbed_band_margin = 0xff, /* default */
+ .swallow_clk_diff = 0xff, /* default */
+ },
+ .hci_io_ds = HCI_IO_DS_6MA,
};
-static void __wl1271_op_remove_interface(struct wl1271 *wl);
+static void __wl1271_op_remove_interface(struct wl1271 *wl,
+ bool reset_tx_queues);
static void wl1271_free_ap_keys(struct wl1271 *wl);
@@ -329,6 +384,7 @@
},
};
+static DEFINE_MUTEX(wl_list_mutex);
static LIST_HEAD(wl_list);
static int wl1271_dev_notify(struct notifier_block *me, unsigned long what,
@@ -359,10 +415,12 @@
return NOTIFY_DONE;
wl_temp = hw->priv;
+ mutex_lock(&wl_list_mutex);
list_for_each_entry(wl, &wl_list, list) {
if (wl == wl_temp)
break;
}
+ mutex_unlock(&wl_list_mutex);
if (wl != wl_temp)
return NOTIFY_DONE;
@@ -438,15 +496,30 @@
struct conf_tx_tid *conf_tid;
int ret, i;
- ret = wl1271_cmd_general_parms(wl);
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ ret = wl128x_cmd_general_parms(wl);
+ else
+ ret = wl1271_cmd_general_parms(wl);
if (ret < 0)
return ret;
- ret = wl1271_cmd_radio_parms(wl);
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ ret = wl128x_cmd_radio_parms(wl);
+ else
+ ret = wl1271_cmd_radio_parms(wl);
if (ret < 0)
return ret;
- ret = wl1271_cmd_ext_radio_parms(wl);
+ if (wl->chip.id != CHIP_ID_1283_PG20) {
+ ret = wl1271_cmd_ext_radio_parms(wl);
+ if (ret < 0)
+ return ret;
+ }
+ if (ret < 0)
+ return ret;
+
+ /* Chip-specific initializations */
+ ret = wl1271_chip_specific_init(wl);
if (ret < 0)
return ret;
@@ -477,6 +550,11 @@
if (ret < 0)
goto out_free_memmap;
+ /* FM WLAN coexistence */
+ ret = wl1271_acx_fm_coex(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
/* Energy detection */
ret = wl1271_init_energy_detection(wl);
if (ret < 0)
@@ -593,15 +671,17 @@
{
struct wl1271_fw_common_status *status = &full_status->common;
struct timespec ts;
- u32 total = 0;
+ u32 old_tx_blk_count = wl->tx_blocks_available;
+ u32 freed_blocks = 0;
int i;
- if (wl->bss_type == BSS_TYPE_AP_BSS)
+ if (wl->bss_type == BSS_TYPE_AP_BSS) {
wl1271_raw_read(wl, FW_STATUS_ADDR, status,
sizeof(struct wl1271_fw_ap_status), false);
- else
+ } else {
wl1271_raw_read(wl, FW_STATUS_ADDR, status,
sizeof(struct wl1271_fw_sta_status), false);
+ }
wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
"drv_rx_counter = %d, tx_results_counter = %d)",
@@ -612,23 +692,38 @@
/* update number of available TX blocks */
for (i = 0; i < NUM_TX_QUEUES; i++) {
- u32 cnt = le32_to_cpu(status->tx_released_blks[i]) -
- wl->tx_blocks_freed[i];
+ freed_blocks += le32_to_cpu(status->tx_released_blks[i]) -
+ wl->tx_blocks_freed[i];
wl->tx_blocks_freed[i] =
le32_to_cpu(status->tx_released_blks[i]);
- wl->tx_blocks_available += cnt;
- total += cnt;
+ }
+
+ wl->tx_allocated_blocks -= freed_blocks;
+
+ if (wl->bss_type == BSS_TYPE_AP_BSS) {
+ /* Update num of allocated TX blocks per link and ps status */
+ wl1271_irq_update_links_status(wl, &full_status->ap);
+ wl->tx_blocks_available += freed_blocks;
+ } else {
+ int avail = full_status->sta.tx_total - wl->tx_allocated_blocks;
+
+ /*
+ * The FW might change the total number of TX memblocks before
+ * we get a notification about blocks being released. Thus, the
+ * available blocks calculation might yield a temporary result
+ * which is lower than the actual available blocks. Keeping in
+ * mind that only blocks that were allocated can be moved from
+ * TX to RX, tx_blocks_available should never decrease here.
+ */
+ wl->tx_blocks_available = max((int)wl->tx_blocks_available,
+ avail);
}
/* if more blocks are available now, tx work can be scheduled */
- if (total)
+ if (wl->tx_blocks_available > old_tx_blk_count)
clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
- /* for AP update num of allocated TX blocks per link and ps status */
- if (wl->bss_type == BSS_TYPE_AP_BSS)
- wl1271_irq_update_links_status(wl, &full_status->ap);
-
/* update the host-chipset time offset */
getnstimeofday(&ts);
wl->time_offset = (timespec_to_ns(&ts) >> 10) -
@@ -674,6 +769,13 @@
set_bit(WL1271_FLAG_TX_PENDING, &wl->flags);
cancel_work_sync(&wl->tx_work);
+ /*
+ * In case edge triggered interrupt must be used, we cannot iterate
+ * more than once without introducing race conditions with the hardirq.
+ */
+ if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+ loopcount = 1;
+
mutex_lock(&wl->mutex);
wl1271_debug(DEBUG_IRQ, "IRQ work");
@@ -785,11 +887,17 @@
switch (wl->bss_type) {
case BSS_TYPE_AP_BSS:
- fw_name = WL1271_AP_FW_NAME;
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ fw_name = WL128X_AP_FW_NAME;
+ else
+ fw_name = WL127X_AP_FW_NAME;
break;
case BSS_TYPE_IBSS:
case BSS_TYPE_STA_BSS:
- fw_name = WL1271_FW_NAME;
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ fw_name = WL128X_FW_NAME;
+ else
+ fw_name = WL1271_FW_NAME;
break;
default:
wl1271_error("no compatible firmware for bss_type %d",
@@ -838,14 +946,14 @@
const struct firmware *fw;
int ret;
- ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
+ ret = request_firmware(&fw, WL12XX_NVS_NAME, wl1271_wl_to_dev(wl));
if (ret < 0) {
wl1271_error("could not get nvs file: %d", ret);
return ret;
}
- wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+ wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
if (!wl->nvs) {
wl1271_error("could not allocate memory for the nvs file");
@@ -871,15 +979,30 @@
if (wl->state != WL1271_STATE_ON)
goto out;
- wl1271_info("Hardware recovery in progress.");
+ wl1271_info("Hardware recovery in progress. FW ver: %s pc: 0x%x",
+ wl->chip.fw_ver_str, wl1271_read32(wl, SCR_PAD4));
if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
ieee80211_connection_loss(wl->vif);
+ /* Prevent spurious TX during FW restart */
+ ieee80211_stop_queues(wl->hw);
+
+ if (wl->sched_scanning) {
+ ieee80211_sched_scan_stopped(wl->hw);
+ wl->sched_scanning = false;
+ }
+
/* reboot the chipset */
- __wl1271_op_remove_interface(wl);
+ __wl1271_op_remove_interface(wl, false);
ieee80211_restart_hw(wl->hw);
+ /*
+ * Its safe to enable TX now - the queues are stopped after a request
+ * to restart the HW.
+ */
+ ieee80211_wake_queues(wl->hw);
+
out:
mutex_unlock(&wl->mutex);
}
@@ -950,10 +1073,25 @@
wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
wl->chip.id);
+ /* end-of-transaction flag should be set in wl127x AP mode */
+ if (wl->bss_type == BSS_TYPE_AP_BSS)
+ wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
+
ret = wl1271_setup(wl);
if (ret < 0)
goto out;
break;
+ case CHIP_ID_1283_PG20:
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)",
+ wl->chip.id);
+
+ ret = wl1271_setup(wl);
+ if (ret < 0)
+ goto out;
+ if (wl1271_set_block_size(wl))
+ wl->quirks |= WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT;
+ break;
+ case CHIP_ID_1283_PG10:
default:
wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
ret = -ENODEV;
@@ -978,6 +1116,24 @@
return ret;
}
+static unsigned int wl1271_get_fw_ver_quirks(struct wl1271 *wl)
+{
+ unsigned int quirks = 0;
+ unsigned int *fw_ver = wl->chip.fw_ver;
+
+ /* Only for wl127x */
+ if ((fw_ver[FW_VER_CHIP] == FW_VER_CHIP_WL127X) &&
+ /* Check STA version */
+ (((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
+ (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_STA_MIN)) ||
+ /* Check AP version */
+ ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP) &&
+ (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_AP_MIN))))
+ quirks |= WL12XX_QUIRK_USE_2_SPARE_BLOCKS;
+
+ return quirks;
+}
+
int wl1271_plt_start(struct wl1271 *wl)
{
int retries = WL1271_BOOT_RETRIES;
@@ -1013,6 +1169,9 @@
wl->state = WL1271_STATE_PLT;
wl1271_notice("firmware booted in PLT mode (%s)",
wl->chip.fw_ver_str);
+
+ /* Check if any quirks are needed with older fw versions */
+ wl->quirks |= wl1271_get_fw_ver_quirks(wl);
goto out;
irq_disable:
@@ -1040,7 +1199,7 @@
return ret;
}
-int __wl1271_plt_stop(struct wl1271 *wl)
+static int __wl1271_plt_stop(struct wl1271 *wl)
{
int ret = 0;
@@ -1124,10 +1283,219 @@
spin_unlock_irqrestore(&wl->wl_lock, flags);
}
+int wl1271_tx_dummy_packet(struct wl1271 *wl)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ set_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags);
+ wl->tx_queue_count++;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ /* The FW is low on RX memory blocks, so send the dummy packet asap */
+ if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags))
+ wl1271_tx_work_locked(wl);
+
+ /*
+ * If the FW TX is busy, TX work will be scheduled by the threaded
+ * interrupt handler function
+ */
+ return 0;
+}
+
+/*
+ * The size of the dummy packet should be at least 1400 bytes. However, in
+ * order to minimize the number of bus transactions, aligning it to 512 bytes
+ * boundaries could be beneficial, performance wise
+ */
+#define TOTAL_TX_DUMMY_PACKET_SIZE (ALIGN(1400, 512))
+
+static struct sk_buff *wl12xx_alloc_dummy_packet(struct wl1271 *wl)
+{
+ struct sk_buff *skb;
+ struct ieee80211_hdr_3addr *hdr;
+ unsigned int dummy_packet_size;
+
+ dummy_packet_size = TOTAL_TX_DUMMY_PACKET_SIZE -
+ sizeof(struct wl1271_tx_hw_descr) - sizeof(*hdr);
+
+ skb = dev_alloc_skb(TOTAL_TX_DUMMY_PACKET_SIZE);
+ if (!skb) {
+ wl1271_warning("Failed to allocate a dummy packet skb");
+ return NULL;
+ }
+
+ skb_reserve(skb, sizeof(struct wl1271_tx_hw_descr));
+
+ hdr = (struct ieee80211_hdr_3addr *) skb_put(skb, sizeof(*hdr));
+ memset(hdr, 0, sizeof(*hdr));
+ hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_NULLFUNC |
+ IEEE80211_FCTL_TODS);
+
+ memset(skb_put(skb, dummy_packet_size), 0, dummy_packet_size);
+
+ /* Dummy packets require the TID to be management */
+ skb->priority = WL1271_TID_MGMT;
+
+ /* Initialize all fields that might be used */
+ skb_set_queue_mapping(skb, 0);
+ memset(IEEE80211_SKB_CB(skb), 0, sizeof(struct ieee80211_tx_info));
+
+ return skb;
+}
+
+
static struct notifier_block wl1271_dev_notifier = {
.notifier_call = wl1271_dev_notify,
};
+#ifdef CONFIG_PM
+static int wl1271_configure_suspend(struct wl1271 *wl)
+{
+ int ret;
+
+ if (wl->bss_type != BSS_TYPE_STA_BSS)
+ return 0;
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out_unlock;
+
+ /* enter psm if needed*/
+ if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+ DECLARE_COMPLETION_ONSTACK(compl);
+
+ wl->ps_compl = &compl;
+ ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
+ wl->basic_rate, true);
+ if (ret < 0)
+ goto out_sleep;
+
+ /* we must unlock here so we will be able to get events */
+ wl1271_ps_elp_sleep(wl);
+ mutex_unlock(&wl->mutex);
+
+ ret = wait_for_completion_timeout(
+ &compl, msecs_to_jiffies(WL1271_PS_COMPLETE_TIMEOUT));
+ if (ret <= 0) {
+ wl1271_warning("couldn't enter ps mode!");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* take mutex again, and wakeup */
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out_unlock;
+ }
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+out_unlock:
+ mutex_unlock(&wl->mutex);
+out:
+ return ret;
+
+}
+
+static void wl1271_configure_resume(struct wl1271 *wl)
+{
+ int ret;
+
+ if (wl->bss_type != BSS_TYPE_STA_BSS)
+ return;
+
+ mutex_lock(&wl->mutex);
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ /* exit psm if it wasn't configured */
+ if (!test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags))
+ wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+ wl->basic_rate, true);
+
+ wl1271_ps_elp_sleep(wl);
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1271_op_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wow)
+{
+ struct wl1271 *wl = hw->priv;
+ wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
+ wl->wow_enabled = !!wow;
+ if (wl->wow_enabled) {
+ int ret;
+ ret = wl1271_configure_suspend(wl);
+ if (ret < 0) {
+ wl1271_warning("couldn't prepare device to suspend");
+ return ret;
+ }
+ /* flush any remaining work */
+ wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
+ flush_delayed_work(&wl->scan_complete_work);
+
+ /*
+ * disable and re-enable interrupts in order to flush
+ * the threaded_irq
+ */
+ wl1271_disable_interrupts(wl);
+
+ /*
+ * set suspended flag to avoid triggering a new threaded_irq
+ * work. no need for spinlock as interrupts are disabled.
+ */
+ set_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+
+ wl1271_enable_interrupts(wl);
+ flush_work(&wl->tx_work);
+ flush_delayed_work(&wl->pspoll_work);
+ flush_delayed_work(&wl->elp_work);
+ }
+ return 0;
+}
+
+static int wl1271_op_resume(struct ieee80211_hw *hw)
+{
+ struct wl1271 *wl = hw->priv;
+ wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
+ wl->wow_enabled);
+
+ /*
+ * re-enable irq_work enqueuing, and call irq_work directly if
+ * there is a pending work.
+ */
+ if (wl->wow_enabled) {
+ struct wl1271 *wl = hw->priv;
+ unsigned long flags;
+ bool run_irq_work = false;
+
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ clear_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+ if (test_and_clear_bit(WL1271_FLAG_PENDING_WORK, &wl->flags))
+ run_irq_work = true;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ if (run_irq_work) {
+ wl1271_debug(DEBUG_MAC80211,
+ "run postponed irq_work directly");
+ wl1271_irq(0, wl);
+ wl1271_enable_interrupts(wl);
+ }
+
+ wl1271_configure_resume(wl);
+ }
+
+ return 0;
+}
+#endif
+
static int wl1271_op_start(struct ieee80211_hw *hw)
{
wl1271_debug(DEBUG_MAC80211, "mac80211 start");
@@ -1174,6 +1542,16 @@
goto out;
}
+ /*
+ * in some very corner case HW recovery scenarios its possible to
+ * get here before __wl1271_op_remove_interface is complete, so
+ * opt out if that is the case.
+ */
+ if (test_bit(WL1271_FLAG_IF_INITIALIZED, &wl->flags)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
switch (vif->type) {
case NL80211_IFTYPE_STATION:
wl->bss_type = BSS_TYPE_STA_BSS;
@@ -1242,6 +1620,7 @@
wl->vif = vif;
wl->state = WL1271_STATE_ON;
+ set_bit(WL1271_FLAG_IF_INITIALIZED, &wl->flags);
wl1271_info("firmware booted (%s)", wl->chip.fw_ver_str);
/* update hw/fw version info in wiphy struct */
@@ -1249,6 +1628,9 @@
strncpy(wiphy->fw_version, wl->chip.fw_ver_str,
sizeof(wiphy->fw_version));
+ /* Check if any quirks are needed with older fw versions */
+ wl->quirks |= wl1271_get_fw_ver_quirks(wl);
+
/*
* Now we know if 11a is supported (info from the NVS), so disable
* 11a channels if not supported
@@ -1262,23 +1644,30 @@
out:
mutex_unlock(&wl->mutex);
+ mutex_lock(&wl_list_mutex);
if (!ret)
list_add(&wl->list, &wl_list);
+ mutex_unlock(&wl_list_mutex);
return ret;
}
-static void __wl1271_op_remove_interface(struct wl1271 *wl)
+static void __wl1271_op_remove_interface(struct wl1271 *wl,
+ bool reset_tx_queues)
{
int i;
wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
+ /* because of hardware recovery, we may get here twice */
+ if (wl->state != WL1271_STATE_ON)
+ return;
+
wl1271_info("down");
+ mutex_lock(&wl_list_mutex);
list_del(&wl->list);
-
- WARN_ON(wl->state != WL1271_STATE_ON);
+ mutex_unlock(&wl_list_mutex);
/* enable dyn ps just in case (if left on due to fw crash etc) */
if (wl->bss_type == BSS_TYPE_STA_BSS)
@@ -1286,12 +1675,15 @@
if (wl->scan.state != WL1271_SCAN_STATE_IDLE) {
wl->scan.state = WL1271_SCAN_STATE_IDLE;
- kfree(wl->scan.scanned_ch);
- wl->scan.scanned_ch = NULL;
+ memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
wl->scan.req = NULL;
ieee80211_scan_completed(wl->hw, true);
}
+ /*
+ * this must be before the cancel_work calls below, so that the work
+ * functions don't perform further work.
+ */
wl->state = WL1271_STATE_OFF;
mutex_unlock(&wl->mutex);
@@ -1307,7 +1699,7 @@
mutex_lock(&wl->mutex);
/* let's notify MAC80211 about the remaining pending TX frames */
- wl1271_tx_reset(wl);
+ wl1271_tx_reset(wl, reset_tx_queues);
wl1271_power_off(wl);
memset(wl->bssid, 0, ETH_ALEN);
@@ -1321,6 +1713,7 @@
wl->psm_entry_retry = 0;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->tx_blocks_available = 0;
+ wl->tx_allocated_blocks = 0;
wl->tx_results_count = 0;
wl->tx_packets_count = 0;
wl->tx_security_last_seq = 0;
@@ -1328,13 +1721,20 @@
wl->time_offset = 0;
wl->session_counter = 0;
wl->rate_set = CONF_TX_RATE_MASK_BASIC;
- wl->flags = 0;
wl->vif = NULL;
wl->filters = 0;
wl1271_free_ap_keys(wl);
memset(wl->ap_hlid_map, 0, sizeof(wl->ap_hlid_map));
wl->ap_fw_ps_map = 0;
wl->ap_ps_map = 0;
+ wl->sched_scanning = false;
+
+ /*
+ * this is performed after the cancel_work calls and the associated
+ * mutex_lock, so that wl1271_op_add_interface does not accidentally
+ * get executed before all these vars have been reset.
+ */
+ wl->flags = 0;
for (i = 0; i < NUM_TX_QUEUES; i++)
wl->tx_blocks_freed[i] = 0;
@@ -1361,14 +1761,14 @@
*/
if (wl->vif) {
WARN_ON(wl->vif != vif);
- __wl1271_op_remove_interface(wl);
+ __wl1271_op_remove_interface(wl, true);
}
mutex_unlock(&wl->mutex);
cancel_work_sync(&wl->recovery_work);
}
-static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters)
+void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters)
{
wl1271_set_default_filters(wl);
@@ -1431,10 +1831,10 @@
* One of the side effects of the JOIN command is that is clears
* WPA/WPA2 keys from the chipset. Performing a JOIN while associated
* to a WPA/WPA2 access point will therefore kill the data-path.
- * Currently there is no supported scenario for JOIN during
- * association - if it becomes a supported scenario, the WPA/WPA2 keys
- * must be handled somehow.
- *
+ * Currently the only valid scenario for JOIN during association
+ * is on roaming, in which case we will also be given new keys.
+ * Keep the below message for now, unless it starts bothering
+ * users who really like to roam a lot :)
*/
if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
wl1271_info("JOIN while associated.");
@@ -1490,7 +1890,7 @@
clear_bit(WL1271_FLAG_JOINED, &wl->flags);
memset(wl->bssid, 0, ETH_ALEN);
- /* stop filterting packets based on bssid */
+ /* stop filtering packets based on bssid */
wl1271_configure_filters(wl, FIF_OTHER_BSS);
out:
@@ -1530,6 +1930,13 @@
wl->session_counter++;
if (wl->session_counter >= SESSION_COUNTER_MAX)
wl->session_counter = 0;
+
+ /* The current firmware only supports sched_scan in idle */
+ if (wl->sched_scanning) {
+ wl1271_scan_sched_scan_stop(wl);
+ ieee80211_sched_scan_stopped(wl->hw);
+ }
+
ret = wl1271_dummy_join(wl);
if (ret < 0)
goto out;
@@ -1569,7 +1976,12 @@
mutex_lock(&wl->mutex);
if (unlikely(wl->state == WL1271_STATE_OFF)) {
- ret = -EAGAIN;
+ /* we support configuring the channel and band while off */
+ if ((changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+ wl->band = conf->channel->band;
+ wl->channel = channel;
+ }
+
goto out;
}
@@ -2077,6 +2489,60 @@
return ret;
}
+static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies)
+{
+ struct wl1271 *wl = hw->priv;
+ int ret;
+
+ wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_start");
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1271_scan_sched_scan_config(wl, req, ies);
+ if (ret < 0)
+ goto out_sleep;
+
+ ret = wl1271_scan_sched_scan_start(wl);
+ if (ret < 0)
+ goto out_sleep;
+
+ wl->sched_scanning = true;
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct wl1271 *wl = hw->priv;
+ int ret;
+
+ wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_stop");
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ wl1271_scan_sched_scan_stop(wl);
+
+ wl1271_ps_elp_sleep(wl);
+out:
+ mutex_unlock(&wl->mutex);
+}
+
static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
{
struct wl1271 *wl = hw->priv;
@@ -2093,7 +2559,7 @@
if (ret < 0)
goto out;
- ret = wl1271_acx_frag_threshold(wl, (u16)value);
+ ret = wl1271_acx_frag_threshold(wl, value);
if (ret < 0)
wl1271_warning("wl1271_op_set_frag_threshold failed: %d", ret);
@@ -2121,7 +2587,7 @@
if (ret < 0)
goto out;
- ret = wl1271_acx_rts_threshold(wl, (u16) value);
+ ret = wl1271_acx_rts_threshold(wl, value);
if (ret < 0)
wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret);
@@ -2136,20 +2602,24 @@
static int wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *skb,
int offset)
{
- u8 *ptr = skb->data + offset;
+ u8 ssid_len;
+ const u8 *ptr = cfg80211_find_ie(WLAN_EID_SSID, skb->data + offset,
+ skb->len - offset);
- /* find the location of the ssid in the beacon */
- while (ptr < skb->data + skb->len) {
- if (ptr[0] == WLAN_EID_SSID) {
- wl->ssid_len = ptr[1];
- memcpy(wl->ssid, ptr+2, wl->ssid_len);
- return 0;
- }
- ptr += (ptr[1] + 2);
+ if (!ptr) {
+ wl1271_error("No SSID in IEs!");
+ return -ENOENT;
}
- wl1271_error("No SSID in IEs!\n");
- return -ENOENT;
+ ssid_len = ptr[1];
+ if (ssid_len > IEEE80211_MAX_SSID_LEN) {
+ wl1271_error("SSID is too long!");
+ return -EINVAL;
+ }
+
+ wl->ssid_len = ssid_len;
+ memcpy(wl->ssid, ptr+2, ssid_len);
+ return 0;
}
static int wl1271_bss_erp_info_changed(struct wl1271 *wl,
@@ -2264,24 +2734,19 @@
if ((changed & BSS_CHANGED_BASIC_RATES)) {
u32 rates = bss_conf->basic_rates;
- struct conf_tx_rate_class mgmt_rc;
wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, rates);
wl->basic_rate = wl1271_tx_min_rate_get(wl);
- wl1271_debug(DEBUG_AP, "basic rates: 0x%x",
- wl->basic_rate_set);
- /* update the AP management rate policy with the new rates */
- mgmt_rc.enabled_rates = wl->basic_rate_set;
- mgmt_rc.long_retry_limit = 10;
- mgmt_rc.short_retry_limit = 10;
- mgmt_rc.aflags = 0;
- ret = wl1271_acx_ap_rate_policy(wl, &mgmt_rc,
- ACX_TX_AP_MODE_MGMT_RATE);
+ ret = wl1271_init_ap_rates(wl);
if (ret < 0) {
- wl1271_error("AP mgmt policy change failed %d", ret);
+ wl1271_error("AP rate policy change failed %d", ret);
goto out;
}
+
+ ret = wl1271_ap_init_templates(wl);
+ if (ret < 0)
+ goto out;
}
ret = wl1271_bss_beacon_info_changed(wl, vif, bss_conf, changed);
@@ -2314,6 +2779,24 @@
}
}
+ if (changed & BSS_CHANGED_IBSS) {
+ wl1271_debug(DEBUG_ADHOC, "ibss_joined: %d",
+ bss_conf->ibss_joined);
+
+ if (bss_conf->ibss_joined) {
+ u32 rates = bss_conf->basic_rates;
+ wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl,
+ rates);
+ wl->basic_rate = wl1271_tx_min_rate_get(wl);
+
+ /* by default, use 11b rates */
+ wl->rate_set = CONF_TX_IBSS_DEFAULT_RATES;
+ ret = wl1271_acx_sta_rate_policies(wl);
+ if (ret < 0)
+ goto out;
+ }
+ }
+
ret = wl1271_bss_erp_info_changed(wl, bss_conf, changed);
if (ret < 0)
goto out;
@@ -2503,8 +2986,10 @@
}
} else {
/* use defaults when not associated */
+ bool was_assoc =
+ !!test_and_clear_bit(WL1271_FLAG_STA_ASSOCIATED,
+ &wl->flags);
clear_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags);
- clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
wl->aid = 0;
/* free probe-request template */
@@ -2530,8 +3015,10 @@
goto out;
/* restore the bssid filter and go to dummy bssid */
- wl1271_unjoin(wl);
- wl1271_dummy_join(wl);
+ if (was_assoc) {
+ wl1271_unjoin(wl);
+ wl1271_dummy_join(wl);
+ }
}
}
@@ -2650,32 +3137,31 @@
conf_tid->ack_policy = CONF_ACK_POLICY_LEGACY;
conf_tid->apsd_conf[0] = 0;
conf_tid->apsd_conf[1] = 0;
- } else {
- ret = wl1271_ps_elp_wakeup(wl);
- if (ret < 0)
- goto out;
+ goto out;
+ }
- /*
- * the txop is confed in units of 32us by the mac80211,
- * we need us
- */
- ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
- params->cw_min, params->cw_max,
- params->aifs, params->txop << 5);
- if (ret < 0)
- goto out_sleep;
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
- ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
- CONF_CHANNEL_TYPE_EDCF,
- wl1271_tx_get_queue(queue),
- ps_scheme, CONF_ACK_POLICY_LEGACY,
- 0, 0);
- if (ret < 0)
- goto out_sleep;
+ /*
+ * the txop is confed in units of 32us by the mac80211,
+ * we need us
+ */
+ ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
+ params->cw_min, params->cw_max,
+ params->aifs, params->txop << 5);
+ if (ret < 0)
+ goto out_sleep;
+
+ ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
+ CONF_CHANNEL_TYPE_EDCF,
+ wl1271_tx_get_queue(queue),
+ ps_scheme, CONF_ACK_POLICY_LEGACY,
+ 0, 0);
out_sleep:
- wl1271_ps_elp_sleep(wl);
- }
+ wl1271_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
@@ -2847,10 +3333,11 @@
return ret;
}
-int wl1271_op_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size)
+static int wl1271_op_ampdu_action(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size)
{
struct wl1271 *wl = hw->priv;
int ret;
@@ -2907,6 +3394,28 @@
return ret;
}
+static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw)
+{
+ struct wl1271 *wl = hw->priv;
+ bool ret = false;
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state == WL1271_STATE_OFF))
+ goto out;
+
+ /* packets are considered pending if in the TX queue or the FW */
+ ret = (wl->tx_queue_count > 0) || (wl->tx_frames_cnt > 0);
+
+ /* the above is appropriate for STA mode for PS purposes */
+ WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
/* can't be const, mac80211 writes to this */
static struct ieee80211_rate wl1271_rates[] = {
{ .bitrate = 10,
@@ -3003,7 +3512,8 @@
#ifdef CONFIG_WL12XX_HT
#define WL12XX_HT_CAP { \
- .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \
+ .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | \
+ (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), \
.ht_supported = true, \
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \
@@ -3142,12 +3652,18 @@
.stop = wl1271_op_stop,
.add_interface = wl1271_op_add_interface,
.remove_interface = wl1271_op_remove_interface,
+#ifdef CONFIG_PM
+ .suspend = wl1271_op_suspend,
+ .resume = wl1271_op_resume,
+#endif
.config = wl1271_op_config,
.prepare_multicast = wl1271_op_prepare_multicast,
.configure_filter = wl1271_op_configure_filter,
.tx = wl1271_op_tx,
.set_key = wl1271_op_set_key,
.hw_scan = wl1271_op_hw_scan,
+ .sched_scan_start = wl1271_op_sched_scan_start,
+ .sched_scan_stop = wl1271_op_sched_scan_stop,
.bss_info_changed = wl1271_op_bss_info_changed,
.set_frag_threshold = wl1271_op_set_frag_threshold,
.set_rts_threshold = wl1271_op_set_rts_threshold,
@@ -3157,6 +3673,7 @@
.sta_add = wl1271_op_sta_add,
.sta_remove = wl1271_op_sta_remove,
.ampdu_action = wl1271_op_ampdu_action,
+ .tx_frames_pending = wl1271_tx_frames_pending,
CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
};
@@ -3207,8 +3724,7 @@
unsigned long res;
int ret;
- ret = strict_strtoul(buf, 10, &res);
-
+ ret = kstrtoul(buf, 10, &res);
if (ret < 0) {
wl1271_warning("incorrect value written to bt_coex_mode");
return count;
@@ -3273,7 +3789,11 @@
ret = wl1271_fetch_nvs(wl);
if (ret == 0) {
- u8 *nvs_ptr = (u8 *)wl->nvs->nvs;
+ /* NOTE: The wl->nvs->nvs element must be first, in
+ * order to simplify the casting, we assume it is at
+ * the beginning of the wl->nvs structure.
+ */
+ u8 *nvs_ptr = (u8 *)wl->nvs;
wl->mac_addr[0] = nvs_ptr[11];
wl->mac_addr[1] = nvs_ptr[10];
@@ -3342,6 +3862,7 @@
IEEE80211_HW_CONNECTION_MONITOR |
IEEE80211_HW_SUPPORTS_CQM_RSSI |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+ IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_AP_LINK_PS;
wl->hw->wiphy->cipher_suites = cipher_suites;
@@ -3358,6 +3879,10 @@
wl->hw->wiphy->max_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE -
sizeof(struct ieee80211_header);
+ /* make sure all our channels fit in the scanned_ch bitmask */
+ BUILD_BUG_ON(ARRAY_SIZE(wl1271_channels) +
+ ARRAY_SIZE(wl1271_channels_5ghz) >
+ WL1271_MAX_CHANNELS);
/*
* We keep local copies of the band structs because we need to
* modify them on a per-device basis.
@@ -3458,6 +3983,8 @@
wl->ap_ps_map = 0;
wl->ap_fw_ps_map = 0;
wl->quirks = 0;
+ wl->platform_quirks = 0;
+ wl->sched_scanning = false;
memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
@@ -3478,11 +4005,17 @@
goto err_hw;
}
+ wl->dummy_packet = wl12xx_alloc_dummy_packet(wl);
+ if (!wl->dummy_packet) {
+ ret = -ENOMEM;
+ goto err_aggr;
+ }
+
/* Register platform device */
ret = platform_device_register(wl->plat_dev);
if (ret) {
wl1271_error("couldn't register platform device");
- goto err_aggr;
+ goto err_dummy_packet;
}
dev_set_drvdata(&wl->plat_dev->dev, wl);
@@ -3508,6 +4041,9 @@
err_platform:
platform_device_unregister(wl->plat_dev);
+err_dummy_packet:
+ dev_kfree_skb(wl->dummy_packet);
+
err_aggr:
free_pages((unsigned long)wl->aggr_buf, order);
@@ -3527,6 +4063,7 @@
int wl1271_free_hw(struct wl1271 *wl)
{
platform_device_unregister(wl->plat_dev);
+ dev_kfree_skb(wl->dummy_packet);
free_pages((unsigned long)wl->aggr_buf,
get_order(WL1271_AGGR_BUFFER_SIZE));
kfree(wl->plat_dev);
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
index 971f13e..b59b6771 100644
--- a/drivers/net/wireless/wl12xx/ps.c
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -43,6 +43,10 @@
if (unlikely(wl->state == WL1271_STATE_OFF))
goto out;
+ /* our work might have been already cancelled */
+ if (unlikely(!test_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
+ goto out;
+
if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
(!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
!test_bit(WL1271_FLAG_IDLE, &wl->flags)))
@@ -61,12 +65,16 @@
/* Routines to toggle sleep mode while in ELP */
void wl1271_ps_elp_sleep(struct wl1271 *wl)
{
- if (test_bit(WL1271_FLAG_PSM, &wl->flags) ||
- test_bit(WL1271_FLAG_IDLE, &wl->flags)) {
- cancel_delayed_work(&wl->elp_work);
- ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
- msecs_to_jiffies(ELP_ENTRY_DELAY));
- }
+ /* we shouldn't get consecutive sleep requests */
+ if (WARN_ON(test_and_set_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
+ return;
+
+ if (!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
+ !test_bit(WL1271_FLAG_IDLE, &wl->flags))
+ return;
+
+ ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
+ msecs_to_jiffies(ELP_ENTRY_DELAY));
}
int wl1271_ps_elp_wakeup(struct wl1271 *wl)
@@ -77,6 +85,16 @@
u32 start_time = jiffies;
bool pending = false;
+ /*
+ * we might try to wake up even if we didn't go to sleep
+ * before (e.g. on boot)
+ */
+ if (!test_and_clear_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags))
+ return 0;
+
+ /* don't cancel_sync as it might contend for a mutex and deadlock */
+ cancel_delayed_work(&wl->elp_work);
+
if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags))
return 0;
@@ -149,9 +167,6 @@
case STATION_ACTIVE_MODE:
default:
wl1271_debug(DEBUG_PSM, "leaving psm");
- ret = wl1271_ps_elp_wakeup(wl);
- if (ret < 0)
- return ret;
/* disable beacon early termination */
ret = wl1271_acx_bet_enable(wl, false);
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
index c41bd0a..25eb9bc 100644
--- a/drivers/net/wireless/wl12xx/ps.h
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -35,4 +35,6 @@
void wl1271_ps_link_start(struct wl1271 *wl, u8 hlid, bool clean_queues);
void wl1271_ps_link_end(struct wl1271 *wl, u8 hlid);
+#define WL1271_PS_COMPLETE_TIMEOUT 500
+
#endif /* __WL1271_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
index 9909607..440a4ee 100644
--- a/drivers/net/wireless/wl12xx/reg.h
+++ b/drivers/net/wireless/wl12xx/reg.h
@@ -207,6 +207,8 @@
#define CHIP_ID_1271_PG10 (0x4030101)
#define CHIP_ID_1271_PG20 (0x4030111)
+#define CHIP_ID_1283_PG10 (0x05030101)
+#define CHIP_ID_1283_PG20 (0x05030111)
#define ENABLE (REGISTERS_BASE + 0x5450)
@@ -452,24 +454,11 @@
#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
-/*
- * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
- * for platforms using active high interrupt level
- */
-#ifdef USE_ACTIVE_HIGH
#define HI_CFG_DEF_VAL \
(HI_CFG_UART_ENABLE | \
HI_CFG_RST232_ENABLE | \
HI_CFG_CLOCK_REQ_SELECT | \
HI_CFG_HOST_INT_ENABLE)
-#else
-#define HI_CFG_DEF_VAL \
- (HI_CFG_UART_ENABLE | \
- HI_CFG_RST232_ENABLE | \
- HI_CFG_CLOCK_REQ_SELECT | \
- HI_CFG_HOST_INT_ENABLE)
-
-#endif
#define REF_FREQ_19_2 0
#define REF_FREQ_26_0 1
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
index 919b59f..7009103 100644
--- a/drivers/net/wireless/wl12xx/rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -48,18 +48,14 @@
struct ieee80211_rx_status *status,
u8 beacon)
{
- enum ieee80211_band desc_band;
-
memset(status, 0, sizeof(struct ieee80211_rx_status));
- status->band = wl->band;
-
if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
- desc_band = IEEE80211_BAND_2GHZ;
+ status->band = IEEE80211_BAND_2GHZ;
else
- desc_band = IEEE80211_BAND_5GHZ;
+ status->band = IEEE80211_BAND_5GHZ;
- status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
+ status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band);
#ifdef CONFIG_WL12XX_HT
/* 11n support */
@@ -76,15 +72,19 @@
*/
wl->noise = desc->rssi - (desc->snr >> 1);
- status->freq = ieee80211_channel_to_frequency(desc->channel, desc_band);
+ status->freq = ieee80211_channel_to_frequency(desc->channel,
+ status->band);
if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
- status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+ u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK;
- if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
- status->flag |= RX_FLAG_DECRYPTED;
- if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
+ status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED |
+ RX_FLAG_DECRYPTED;
+
+ if (unlikely(desc_err_code == WL1271_RX_DESC_MIC_FAIL)) {
status->flag |= RX_FLAG_MMIC_ERROR;
+ wl1271_warning("Michael MIC error");
+ }
}
}
@@ -103,6 +103,25 @@
if (unlikely(wl->state == WL1271_STATE_PLT))
return -EINVAL;
+ /* the data read starts with the descriptor */
+ desc = (struct wl1271_rx_descriptor *) data;
+
+ switch (desc->status & WL1271_RX_DESC_STATUS_MASK) {
+ /* discard corrupted packets */
+ case WL1271_RX_DESC_DRIVER_RX_Q_FAIL:
+ case WL1271_RX_DESC_DECRYPT_FAIL:
+ wl1271_warning("corrupted packet in RX with status: 0x%x",
+ desc->status & WL1271_RX_DESC_STATUS_MASK);
+ return -EINVAL;
+ case WL1271_RX_DESC_SUCCESS:
+ case WL1271_RX_DESC_MIC_FAIL:
+ break;
+ default:
+ wl1271_error("invalid RX descriptor status: 0x%x",
+ desc->status & WL1271_RX_DESC_STATUS_MASK);
+ return -EINVAL;
+ }
+
skb = __dev_alloc_skb(length, GFP_KERNEL);
if (!skb) {
wl1271_error("Couldn't allocate RX frame");
@@ -112,9 +131,6 @@
buf = skb_put(skb, length);
memcpy(buf, data, length);
- /* the data read starts with the descriptor */
- desc = (struct wl1271_rx_descriptor *) buf;
-
/* now we pull the descriptor out of the buffer */
skb_pull(skb, sizeof(*desc));
@@ -124,7 +140,8 @@
wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
- wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+ wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb,
+ skb->len - desc->pad_len,
beacon ? "beacon" : "");
skb_trim(skb, skb->len - desc->pad_len);
@@ -163,18 +180,25 @@
break;
}
- /*
- * Choose the block we want to read
- * For aggregated packets, only the first memory block should
- * be retrieved. The FW takes care of the rest.
- */
- mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
- wl->rx_mem_pool_addr.addr = (mem_block << 8) +
- le32_to_cpu(wl_mem_map->packet_memory_pool_start);
- wl->rx_mem_pool_addr.addr_extra =
- wl->rx_mem_pool_addr.addr + 4;
- wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
- sizeof(wl->rx_mem_pool_addr), false);
+ if (wl->chip.id != CHIP_ID_1283_PG20) {
+ /*
+ * Choose the block we want to read
+ * For aggregated packets, only the first memory block
+ * should be retrieved. The FW takes care of the rest.
+ */
+ mem_block = wl1271_rx_get_mem_block(status,
+ drv_rx_counter);
+
+ wl->rx_mem_pool_addr.addr = (mem_block << 8) +
+ le32_to_cpu(wl_mem_map->packet_memory_pool_start);
+
+ wl->rx_mem_pool_addr.addr_extra =
+ wl->rx_mem_pool_addr.addr + 4;
+
+ wl1271_write(wl, WL1271_SLV_REG_DATA,
+ &wl->rx_mem_pool_addr,
+ sizeof(wl->rx_mem_pool_addr), false);
+ }
/* Read all available packets at once */
wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 420653a..f37e5a3 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -48,8 +48,7 @@
goto out;
wl->scan.state = WL1271_SCAN_STATE_IDLE;
- kfree(wl->scan.scanned_ch);
- wl->scan.scanned_ch = NULL;
+ memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
wl->scan.req = NULL;
ieee80211_scan_completed(wl->hw, false);
@@ -87,7 +86,7 @@
flags = req->channels[i]->flags;
- if (!wl->scan.scanned_ch[i] &&
+ if (!test_bit(i, wl->scan.scanned_ch) &&
!(flags & IEEE80211_CHAN_DISABLED) &&
((!!(flags & IEEE80211_CHAN_PASSIVE_SCAN)) == passive) &&
(req->channels[i]->band == band)) {
@@ -124,7 +123,7 @@
memset(&channels[j].bssid_msb, 0xff, 2);
/* Mark the channels we already used */
- wl->scan.scanned_ch[i] = true;
+ set_bit(i, wl->scan.scanned_ch);
j++;
}
@@ -291,6 +290,12 @@
int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
struct cfg80211_scan_request *req)
{
+ /*
+ * cfg80211 should guarantee that we don't get more channels
+ * than what we have registered.
+ */
+ BUG_ON(req->n_channels > WL1271_MAX_CHANNELS);
+
if (wl->scan.state != WL1271_SCAN_STATE_IDLE)
return -EBUSY;
@@ -304,10 +309,8 @@
}
wl->scan.req = req;
+ memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
- wl->scan.scanned_ch = kcalloc(req->n_channels,
- sizeof(*wl->scan.scanned_ch),
- GFP_KERNEL);
/* we assume failure so that timeout scenarios are handled correctly */
wl->scan.failed = true;
ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
@@ -317,3 +320,246 @@
return 0;
}
+
+static int
+wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
+ struct cfg80211_sched_scan_request *req,
+ struct conn_scan_ch_params *channels,
+ u32 band, bool radar, bool passive,
+ int start)
+{
+ struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+ int i, j;
+ u32 flags;
+
+ for (i = 0, j = start;
+ i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
+ i++) {
+ flags = req->channels[i]->flags;
+
+ if (!(flags & IEEE80211_CHAN_DISABLED) &&
+ ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
+ ((flags & IEEE80211_CHAN_RADAR) == radar) &&
+ (req->channels[i]->band == band)) {
+ wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
+ req->channels[i]->band,
+ req->channels[i]->center_freq);
+ wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X",
+ req->channels[i]->hw_value,
+ req->channels[i]->flags);
+ wl1271_debug(DEBUG_SCAN, "max_power %d",
+ req->channels[i]->max_power);
+
+ if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+ channels[j].passive_duration =
+ cpu_to_le16(c->dwell_time_passive);
+ } else {
+ channels[j].min_duration =
+ cpu_to_le16(c->min_dwell_time_active);
+ channels[j].max_duration =
+ cpu_to_le16(c->max_dwell_time_active);
+ }
+ channels[j].tx_power_att = req->channels[j]->max_power;
+ channels[j].channel = req->channels[i]->hw_value;
+
+ j++;
+ }
+ }
+
+ return j - start;
+}
+
+static int
+wl1271_scan_sched_scan_channels(struct wl1271 *wl,
+ struct cfg80211_sched_scan_request *req,
+ struct wl1271_cmd_sched_scan_config *cfg)
+{
+ int idx = 0;
+
+ cfg->passive[0] =
+ wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+ IEEE80211_BAND_2GHZ,
+ false, true, idx);
+ idx += cfg->passive[0];
+
+ cfg->active[0] =
+ wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+ IEEE80211_BAND_2GHZ,
+ false, false, idx);
+ idx += cfg->active[0];
+
+ cfg->passive[1] =
+ wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+ IEEE80211_BAND_5GHZ,
+ false, true, idx);
+ idx += cfg->passive[1];
+
+ cfg->active[1] =
+ wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+ IEEE80211_BAND_5GHZ,
+ false, false, 14);
+ idx += cfg->active[1];
+
+ cfg->dfs =
+ wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
+ IEEE80211_BAND_5GHZ,
+ true, false, idx);
+ idx += cfg->dfs;
+
+ wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d",
+ cfg->active[0], cfg->passive[0]);
+ wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d",
+ cfg->active[1], cfg->passive[1]);
+
+ return idx;
+}
+
+int wl1271_scan_sched_scan_config(struct wl1271 *wl,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies)
+{
+ struct wl1271_cmd_sched_scan_config *cfg = NULL;
+ struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+ int i, total_channels, ret;
+
+ wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
+
+ cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ cfg->rssi_threshold = c->rssi_threshold;
+ cfg->snr_threshold = c->snr_threshold;
+ cfg->n_probe_reqs = c->num_probe_reqs;
+ /* cycles set to 0 it means infinite (until manually stopped) */
+ cfg->cycles = 0;
+ /* report APs when at least 1 is found */
+ cfg->report_after = 1;
+ /* don't stop scanning automatically when something is found */
+ cfg->terminate = 0;
+ cfg->tag = WL1271_SCAN_DEFAULT_TAG;
+ /* don't filter on BSS type */
+ cfg->bss_type = SCAN_BSS_TYPE_ANY;
+ /* currently NL80211 supports only a single interval */
+ for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
+ cfg->intervals[i] = cpu_to_le32(req->interval);
+
+ if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+ cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
+ cfg->ssid_len = req->ssids[0].ssid_len;
+ memcpy(cfg->ssid, req->ssids[0].ssid,
+ req->ssids[0].ssid_len);
+ } else {
+ cfg->filter_type = SCAN_SSID_FILTER_ANY;
+ cfg->ssid_len = 0;
+ }
+
+ total_channels = wl1271_scan_sched_scan_channels(wl, req, cfg);
+ if (total_channels == 0) {
+ wl1271_error("scan channel list is empty");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (cfg->active[0]) {
+ ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
+ req->ssids[0].ssid_len,
+ ies->ie[IEEE80211_BAND_2GHZ],
+ ies->len[IEEE80211_BAND_2GHZ],
+ IEEE80211_BAND_2GHZ);
+ if (ret < 0) {
+ wl1271_error("2.4GHz PROBE request template failed");
+ goto out;
+ }
+ }
+
+ if (cfg->active[1]) {
+ ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
+ req->ssids[0].ssid_len,
+ ies->ie[IEEE80211_BAND_5GHZ],
+ ies->len[IEEE80211_BAND_5GHZ],
+ IEEE80211_BAND_5GHZ);
+ if (ret < 0) {
+ wl1271_error("5GHz PROBE request template failed");
+ goto out;
+ }
+ }
+
+ wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg));
+
+ ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg,
+ sizeof(*cfg), 0);
+ if (ret < 0) {
+ wl1271_error("SCAN configuration failed");
+ goto out;
+ }
+out:
+ kfree(cfg);
+ return ret;
+}
+
+int wl1271_scan_sched_scan_start(struct wl1271 *wl)
+{
+ struct wl1271_cmd_sched_scan_start *start;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_CMD, "cmd periodic scan start");
+
+ if (wl->bss_type != BSS_TYPE_STA_BSS)
+ return -EOPNOTSUPP;
+
+ if (!test_bit(WL1271_FLAG_IDLE, &wl->flags))
+ return -EBUSY;
+
+ start = kzalloc(sizeof(*start), GFP_KERNEL);
+ if (!start)
+ return -ENOMEM;
+
+ start->tag = WL1271_SCAN_DEFAULT_TAG;
+
+ ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start,
+ sizeof(*start), 0);
+ if (ret < 0) {
+ wl1271_error("failed to send scan start command");
+ goto out_free;
+ }
+
+out_free:
+ kfree(start);
+ return ret;
+}
+
+void wl1271_scan_sched_scan_results(struct wl1271 *wl)
+{
+ wl1271_debug(DEBUG_SCAN, "got periodic scan results");
+
+ ieee80211_sched_scan_results(wl->hw);
+}
+
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
+{
+ struct wl1271_cmd_sched_scan_stop *stop;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_CMD, "cmd periodic scan stop");
+
+ /* FIXME: what to do if alloc'ing to stop fails? */
+ stop = kzalloc(sizeof(*stop), GFP_KERNEL);
+ if (!stop) {
+ wl1271_error("failed to alloc memory to send sched scan stop");
+ return;
+ }
+
+ stop->tag = WL1271_SCAN_DEFAULT_TAG;
+
+ ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
+ sizeof(*stop), 0);
+ if (ret < 0) {
+ wl1271_error("failed to send sched scan stop command");
+ goto out_free;
+ }
+ wl->sched_scanning = false;
+
+out_free:
+ kfree(stop);
+}
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index 421a750..c833195 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -33,6 +33,12 @@
const u8 *ie, size_t ie_len, u8 band);
void wl1271_scan_stm(struct wl1271 *wl);
void wl1271_scan_complete_work(struct work_struct *work);
+int wl1271_scan_sched_scan_config(struct wl1271 *wl,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies);
+int wl1271_scan_sched_scan_start(struct wl1271 *wl);
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl);
+void wl1271_scan_sched_scan_results(struct wl1271 *wl);
#define WL1271_SCAN_MAX_CHANNELS 24
#define WL1271_SCAN_DEFAULT_TAG 1
@@ -106,4 +112,112 @@
__le32 timeout;
} __packed;
+#define MAX_CHANNELS_ALL_BANDS 41
+#define SCAN_MAX_CYCLE_INTERVALS 16
+#define SCAN_MAX_BANDS 3
+
+enum {
+ SCAN_CHANNEL_TYPE_2GHZ_PASSIVE,
+ SCAN_CHANNEL_TYPE_2GHZ_ACTIVE,
+ SCAN_CHANNEL_TYPE_5GHZ_PASSIVE,
+ SCAN_CHANNEL_TYPE_5GHZ_ACTIVE,
+ SCAN_CHANNEL_TYPE_5GHZ_DFS,
+};
+
+enum {
+ SCAN_SSID_FILTER_ANY = 0,
+ SCAN_SSID_FILTER_SPECIFIC = 1,
+ SCAN_SSID_FILTER_LIST = 2,
+ SCAN_SSID_FILTER_DISABLED = 3
+};
+
+enum {
+ SCAN_BSS_TYPE_INDEPENDENT,
+ SCAN_BSS_TYPE_INFRASTRUCTURE,
+ SCAN_BSS_TYPE_ANY,
+};
+
+struct conn_scan_ch_params {
+ __le16 min_duration;
+ __le16 max_duration;
+ __le16 passive_duration;
+
+ u8 channel;
+ u8 tx_power_att;
+
+ /* bit 0: DFS channel; bit 1: DFS enabled */
+ u8 flags;
+
+ u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_config {
+ struct wl1271_cmd_header header;
+
+ __le32 intervals[SCAN_MAX_CYCLE_INTERVALS];
+
+ s8 rssi_threshold; /* for filtering (in dBm) */
+ s8 snr_threshold; /* for filtering (in dB) */
+
+ u8 cycles; /* maximum number of scan cycles */
+ u8 report_after; /* report when this number of results are received */
+ u8 terminate; /* stop scanning after reporting */
+
+ u8 tag;
+ u8 bss_type; /* for filtering */
+ u8 filter_type;
+
+ u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */
+ u8 ssid[IW_ESSID_MAX_SIZE];
+
+ u8 n_probe_reqs; /* Number of probes requests per channel */
+
+ u8 passive[SCAN_MAX_BANDS];
+ u8 active[SCAN_MAX_BANDS];
+
+ u8 dfs;
+
+ u8 padding[3];
+
+ struct conn_scan_ch_params channels[MAX_CHANNELS_ALL_BANDS];
+} __packed;
+
+
+#define SCHED_SCAN_MAX_SSIDS 8
+
+enum {
+ SCAN_SSID_TYPE_PUBLIC = 0,
+ SCAN_SSID_TYPE_HIDDEN = 1,
+};
+
+struct wl1271_ssid {
+ u8 type;
+ u8 len;
+ u8 ssid[IW_ESSID_MAX_SIZE];
+ /* u8 padding[2]; */
+} __packed;
+
+struct wl1271_cmd_sched_scan_ssid_list {
+ struct wl1271_cmd_header header;
+
+ u8 n_ssids;
+ struct wl1271_ssid ssids[SCHED_SCAN_MAX_SSIDS];
+ u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_start {
+ struct wl1271_cmd_header header;
+
+ u8 tag;
+ u8 padding[3];
+} __packed;
+
+struct wl1271_cmd_sched_scan_stop {
+ struct wl1271_cmd_header header;
+
+ u8 tag;
+ u8 padding[3];
+} __packed;
+
+
#endif /* __WL1271_SCAN_H__ */
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index b1c7d03..536e506 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -51,6 +51,13 @@
};
MODULE_DEVICE_TABLE(sdio, wl1271_devices);
+static void wl1271_sdio_set_block_size(struct wl1271 *wl, unsigned int blksz)
+{
+ sdio_claim_host(wl->if_priv);
+ sdio_set_block_size(wl->if_priv, blksz);
+ sdio_release_host(wl->if_priv);
+}
+
static inline struct sdio_func *wl_to_func(struct wl1271 *wl)
{
return wl->if_priv;
@@ -75,6 +82,16 @@
complete(wl->elp_compl);
wl->elp_compl = NULL;
}
+
+ if (test_bit(WL1271_FLAG_SUSPENDED, &wl->flags)) {
+ /* don't enqueue a work right now. mark it as pending */
+ set_bit(WL1271_FLAG_PENDING_WORK, &wl->flags);
+ wl1271_debug(DEBUG_IRQ, "should not enqueue work");
+ disable_irq_nosync(wl->irq);
+ pm_wakeup_event(wl1271_sdio_wl_to_dev(wl), 0);
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+ return IRQ_HANDLED;
+ }
spin_unlock_irqrestore(&wl->wl_lock, flags);
return IRQ_WAKE_THREAD;
@@ -203,7 +220,8 @@
.power = wl1271_sdio_set_power,
.dev = wl1271_sdio_wl_to_dev,
.enable_irq = wl1271_sdio_enable_interrupts,
- .disable_irq = wl1271_sdio_disable_interrupts
+ .disable_irq = wl1271_sdio_disable_interrupts,
+ .set_block_size = wl1271_sdio_set_block_size,
};
static int __devinit wl1271_probe(struct sdio_func *func,
@@ -212,6 +230,8 @@
struct ieee80211_hw *hw;
const struct wl12xx_platform_data *wlan_data;
struct wl1271 *wl;
+ unsigned long irqflags;
+ mmc_pm_flag_t mmcflags;
int ret;
/* We are only able to handle the wlan function */
@@ -230,6 +250,9 @@
/* Grab access to FN0 for ELP reg. */
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ /* Use block mode for transferring over one block size of data */
+ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
wlan_data = wl12xx_get_platform_data();
if (IS_ERR(wlan_data)) {
ret = PTR_ERR(wlan_data);
@@ -239,17 +262,34 @@
wl->irq = wlan_data->irq;
wl->ref_clock = wlan_data->board_ref_clock;
+ wl->tcxo_clock = wlan_data->board_tcxo_clock;
+ wl->platform_quirks = wlan_data->platform_quirks;
+
+ if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+ irqflags = IRQF_TRIGGER_RISING;
+ else
+ irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ irqflags,
DRIVER_NAME, wl);
if (ret < 0) {
wl1271_error("request_irq() failed: %d", ret);
goto out_free;
}
+ enable_irq_wake(wl->irq);
+ device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 1);
+
disable_irq(wl->irq);
+ /* if sdio can keep power while host is suspended, enable wow */
+ mmcflags = sdio_get_host_pm_caps(func);
+ wl1271_debug(DEBUG_SDIO, "sdio PM caps = 0x%x", mmcflags);
+
+ if (mmcflags & MMC_PM_KEEP_POWER)
+ hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY;
+
ret = wl1271_init_ieee80211(wl);
if (ret)
goto out_irq;
@@ -284,19 +324,61 @@
pm_runtime_get_noresume(&func->dev);
wl1271_unregister_hw(wl);
+ device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 0);
+ disable_irq_wake(wl->irq);
free_irq(wl->irq, wl);
wl1271_free_hw(wl);
}
+#ifdef CONFIG_PM
static int wl1271_suspend(struct device *dev)
{
/* Tell MMC/SDIO core it's OK to power down the card
* (if it isn't already), but not to remove it completely */
- return 0;
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct wl1271 *wl = sdio_get_drvdata(func);
+ mmc_pm_flag_t sdio_flags;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_MAC80211, "wl1271 suspend. wow_enabled: %d",
+ wl->wow_enabled);
+
+ /* check whether sdio should keep power */
+ if (wl->wow_enabled) {
+ sdio_flags = sdio_get_host_pm_caps(func);
+
+ if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+ wl1271_error("can't keep power while host "
+ "is suspended");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* keep power while host suspended */
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ if (ret) {
+ wl1271_error("error while trying to keep power");
+ goto out;
+ }
+
+ /* release host */
+ sdio_release_host(func);
+ }
+out:
+ return ret;
}
static int wl1271_resume(struct device *dev)
{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct wl1271 *wl = sdio_get_drvdata(func);
+
+ wl1271_debug(DEBUG_MAC80211, "wl1271 resume");
+ if (wl->wow_enabled) {
+ /* claim back host */
+ sdio_claim_host(func);
+ }
+
return 0;
}
@@ -304,15 +386,18 @@
.suspend = wl1271_suspend,
.resume = wl1271_resume,
};
+#endif
static struct sdio_driver wl1271_sdio_driver = {
.name = "wl1271_sdio",
.id_table = wl1271_devices,
.probe = wl1271_probe,
.remove = __devexit_p(wl1271_remove),
+#ifdef CONFIG_PM
.drv = {
.pm = &wl1271_sdio_pm_ops,
},
+#endif
};
static int __init wl1271_init(void)
@@ -343,4 +428,6 @@
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
MODULE_FIRMWARE(WL1271_FW_NAME);
-MODULE_FIRMWARE(WL1271_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME);
+MODULE_FIRMWARE(WL127X_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_AP_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
index 9fcbd3d..f289153 100644
--- a/drivers/net/wireless/wl12xx/sdio_test.c
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -189,7 +189,12 @@
const struct firmware *fw;
int ret;
- ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl));
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ ret = request_firmware(&fw, WL128X_FW_NAME,
+ wl1271_wl_to_dev(wl));
+ else
+ ret = request_firmware(&fw, WL1271_FW_NAME,
+ wl1271_wl_to_dev(wl));
if (ret < 0) {
wl1271_error("could not get firmware: %d", ret);
@@ -227,14 +232,14 @@
const struct firmware *fw;
int ret;
- ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
+ ret = request_firmware(&fw, WL12XX_NVS_NAME, wl1271_wl_to_dev(wl));
if (ret < 0) {
wl1271_error("could not get nvs file: %d", ret);
return ret;
}
- wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+ wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
if (!wl->nvs) {
wl1271_error("could not allocate memory for the nvs file");
@@ -288,6 +293,11 @@
wl1271_notice("chip id 0x%x (1271 PG20)",
wl->chip.id);
break;
+ case CHIP_ID_1283_PG20:
+ wl1271_notice("chip id 0x%x (1283 PG20)",
+ wl->chip.id);
+ break;
+ case CHIP_ID_1283_PG10:
default:
wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
return -ENODEV;
@@ -407,6 +417,9 @@
/* Grab access to FN0 for ELP reg. */
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ /* Use block mode for transferring over one block size of data */
+ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
wlan_data = wl12xx_get_platform_data();
if (IS_ERR(wlan_data)) {
ret = PTR_ERR(wlan_data);
@@ -416,6 +429,7 @@
wl->irq = wlan_data->irq;
wl->ref_clock = wlan_data->board_ref_clock;
+ wl->tcxo_clock = wlan_data->board_tcxo_clock;
sdio_set_drvdata(func, wl_test);
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
index ffc745b..51662bb 100644
--- a/drivers/net/wireless/wl12xx/spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -355,7 +355,8 @@
.power = wl1271_spi_set_power,
.dev = wl1271_spi_wl_to_dev,
.enable_irq = wl1271_spi_enable_interrupts,
- .disable_irq = wl1271_spi_disable_interrupts
+ .disable_irq = wl1271_spi_disable_interrupts,
+ .set_block_size = NULL,
};
static int __devinit wl1271_probe(struct spi_device *spi)
@@ -363,6 +364,7 @@
struct wl12xx_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1271 *wl;
+ unsigned long irqflags;
int ret;
pdata = spi->dev.platform_data;
@@ -400,6 +402,13 @@
}
wl->ref_clock = pdata->board_ref_clock;
+ wl->tcxo_clock = pdata->board_tcxo_clock;
+ wl->platform_quirks = pdata->platform_quirks;
+
+ if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+ irqflags = IRQF_TRIGGER_RISING;
+ else
+ irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
wl->irq = spi->irq;
if (wl->irq < 0) {
@@ -409,7 +418,7 @@
}
ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ irqflags,
DRIVER_NAME, wl);
if (ret < 0) {
wl1271_error("request_irq() failed: %d", ret);
@@ -490,5 +499,7 @@
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
MODULE_FIRMWARE(WL1271_FW_NAME);
-MODULE_FIRMWARE(WL1271_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME);
+MODULE_FIRMWARE(WL127X_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_AP_FW_NAME);
MODULE_ALIAS("spi:wl1271");
diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c
index 6ec06a4..da351d7 100644
--- a/drivers/net/wireless/wl12xx/testmode.c
+++ b/drivers/net/wireless/wl12xx/testmode.c
@@ -27,6 +27,7 @@
#include "wl12xx.h"
#include "acx.h"
+#include "reg.h"
#define WL1271_TM_MAX_DATA_LENGTH 1024
@@ -204,7 +205,10 @@
kfree(wl->nvs);
- if (len != sizeof(struct wl1271_nvs_file))
+ if ((wl->chip.id == CHIP_ID_1283_PG20) &&
+ (len != sizeof(struct wl128x_nvs_file)))
+ return -EINVAL;
+ else if (len != sizeof(struct wl1271_nvs_file))
return -EINVAL;
wl->nvs = kzalloc(len, GFP_KERNEL);
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 5e9ef7d..ca3ab1c 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -65,11 +65,36 @@
static void wl1271_free_tx_id(struct wl1271 *wl, int id)
{
if (__test_and_clear_bit(id, wl->tx_frames_map)) {
+ if (unlikely(wl->tx_frames_cnt == ACX_TX_DESCRIPTORS))
+ clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
+
wl->tx_frames[id] = NULL;
wl->tx_frames_cnt--;
}
}
+static int wl1271_tx_update_filters(struct wl1271 *wl,
+ struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr;
+
+ hdr = (struct ieee80211_hdr *)(skb->data +
+ sizeof(struct wl1271_tx_hw_descr));
+
+ /*
+ * stop bssid-based filtering before transmitting authentication
+ * requests. this way the hw will never drop authentication
+ * responses coming from BSSIDs it isn't familiar with (e.g. on
+ * roaming)
+ */
+ if (!ieee80211_is_auth(hdr->frame_control))
+ return 0;
+
+ wl1271_configure_filters(wl, FIF_OTHER_BSS);
+
+ return wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+}
+
static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl,
struct sk_buff *skb)
{
@@ -127,13 +152,29 @@
}
}
+static unsigned int wl12xx_calc_packet_alignment(struct wl1271 *wl,
+ unsigned int packet_length)
+{
+ if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT)
+ return ALIGN(packet_length, WL12XX_BUS_BLOCK_SIZE);
+ else
+ return ALIGN(packet_length, WL1271_TX_ALIGN_TO);
+}
+
static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
u32 buf_offset, u8 hlid)
{
struct wl1271_tx_hw_descr *desc;
u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
+ u32 len;
u32 total_blocks;
int id, ret = -EBUSY;
+ u32 spare_blocks;
+
+ if (unlikely(wl->quirks & WL12XX_QUIRK_USE_2_SPARE_BLOCKS))
+ spare_blocks = 2;
+ else
+ spare_blocks = 1;
if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
return -EAGAIN;
@@ -145,17 +186,27 @@
/* approximate the number of blocks required for this packet
in the firmware */
- total_blocks = total_len + TX_HW_BLOCK_SIZE - 1;
- total_blocks = total_blocks / TX_HW_BLOCK_SIZE + TX_HW_BLOCK_SPARE;
+ len = wl12xx_calc_packet_alignment(wl, total_len);
+
+ total_blocks = (len + TX_HW_BLOCK_SIZE - 1) / TX_HW_BLOCK_SIZE +
+ spare_blocks;
+
if (total_blocks <= wl->tx_blocks_available) {
desc = (struct wl1271_tx_hw_descr *)skb_push(
skb, total_len - skb->len);
- desc->extra_mem_blocks = TX_HW_BLOCK_SPARE;
- desc->total_mem_blocks = total_blocks;
+ /* HW descriptor fields change between wl127x and wl128x */
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ desc->wl128x_mem.total_mem_blocks = total_blocks;
+ } else {
+ desc->wl127x_mem.extra_blocks = spare_blocks;
+ desc->wl127x_mem.total_mem_blocks = total_blocks;
+ }
+
desc->id = id;
wl->tx_blocks_available -= total_blocks;
+ wl->tx_allocated_blocks += total_blocks;
if (wl->bss_type == BSS_TYPE_AP_BSS)
wl->links[hlid].allocated_blks += total_blocks;
@@ -172,13 +223,18 @@
return ret;
}
+static bool wl12xx_is_dummy_packet(struct wl1271 *wl, struct sk_buff *skb)
+{
+ return wl->dummy_packet == skb;
+}
+
static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
u32 extra, struct ieee80211_tx_info *control,
u8 hlid)
{
struct timespec ts;
struct wl1271_tx_hw_descr *desc;
- int pad, ac, rate_idx;
+ int aligned_len, ac, rate_idx;
s64 hosttime;
u16 tx_attr;
@@ -202,12 +258,25 @@
else
desc->life_time = cpu_to_le16(TX_HW_AP_MODE_PKT_LIFETIME_TU);
- /* configure the tx attributes */
- tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
-
- /* queue (we use same identifiers for tid's and ac's */
+ /* queue */
ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
- desc->tid = ac;
+ desc->tid = skb->priority;
+
+ if (wl12xx_is_dummy_packet(wl, skb)) {
+ /*
+ * FW expects the dummy packet to have an invalid session id -
+ * any session id that is different than the one set in the join
+ */
+ tx_attr = ((~wl->session_counter) <<
+ TX_HW_ATTR_OFST_SESSION_COUNTER) &
+ TX_HW_ATTR_SESSION_COUNTER;
+
+ tx_attr |= TX_HW_ATTR_TX_DUMMY_REQ;
+ } else {
+ /* configure the tx attributes */
+ tx_attr =
+ wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
+ }
if (wl->bss_type != BSS_TYPE_AP_BSS) {
desc->aid = hlid;
@@ -237,20 +306,37 @@
tx_attr |= rate_idx << TX_HW_ATTR_OFST_RATE_POLICY;
desc->reserved = 0;
- /* align the length (and store in terms of words) */
- pad = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
- desc->length = cpu_to_le16(pad >> 2);
+ aligned_len = wl12xx_calc_packet_alignment(wl, skb->len);
- /* calculate number of padding bytes */
- pad = pad - skb->len;
- tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ desc->wl128x_mem.extra_bytes = aligned_len - skb->len;
+ desc->length = cpu_to_le16(aligned_len >> 2);
+
+ wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d "
+ "tx_attr: 0x%x len: %d life: %d mem: %d",
+ desc->hlid, tx_attr,
+ le16_to_cpu(desc->length),
+ le16_to_cpu(desc->life_time),
+ desc->wl128x_mem.total_mem_blocks);
+ } else {
+ int pad;
+
+ /* Store the aligned length in terms of words */
+ desc->length = cpu_to_le16(aligned_len >> 2);
+
+ /* calculate number of padding bytes */
+ pad = aligned_len - skb->len;
+ tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+
+ wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d hlid: %d "
+ "tx_attr: 0x%x len: %d life: %d mem: %d", pad,
+ desc->hlid, tx_attr,
+ le16_to_cpu(desc->length),
+ le16_to_cpu(desc->life_time),
+ desc->wl127x_mem.total_mem_blocks);
+ }
desc->tx_attr = cpu_to_le16(tx_attr);
-
- wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d hlid: %d "
- "tx_attr: 0x%x len: %d life: %d mem: %d", pad, desc->hlid,
- le16_to_cpu(desc->tx_attr), le16_to_cpu(desc->length),
- le16_to_cpu(desc->life_time), desc->total_mem_blocks);
}
/* caller must hold wl->mutex */
@@ -300,19 +386,29 @@
if (wl->bss_type == BSS_TYPE_AP_BSS) {
wl1271_tx_ap_update_inconnection_sta(wl, skb);
wl1271_tx_regulate_link(wl, hlid);
+ } else {
+ wl1271_tx_update_filters(wl, skb);
}
wl1271_tx_fill_hdr(wl, skb, extra, info, hlid);
/*
- * The length of each packet is stored in terms of words. Thus, we must
- * pad the skb data to make sure its length is aligned.
- * The number of padding bytes is computed and set in wl1271_tx_fill_hdr
+ * The length of each packet is stored in terms of
+ * words. Thus, we must pad the skb data to make sure its
+ * length is aligned. The number of padding bytes is computed
+ * and set in wl1271_tx_fill_hdr.
+ * In special cases, we want to align to a specific block size
+ * (eg. for wl128x with SDIO we align to 256).
*/
- total_len = ALIGN(skb->len, WL1271_TX_ALIGN_TO);
+ total_len = wl12xx_calc_packet_alignment(wl, skb->len);
+
memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
+ /* Revert side effects in the dummy packet skb, so it can be reused */
+ if (wl12xx_is_dummy_packet(wl, skb))
+ skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
+
return total_len;
}
@@ -425,10 +521,23 @@
static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl)
{
- if (wl->bss_type == BSS_TYPE_AP_BSS)
- return wl1271_ap_skb_dequeue(wl);
+ unsigned long flags;
+ struct sk_buff *skb = NULL;
- return wl1271_sta_skb_dequeue(wl);
+ if (wl->bss_type == BSS_TYPE_AP_BSS)
+ skb = wl1271_ap_skb_dequeue(wl);
+ else
+ skb = wl1271_sta_skb_dequeue(wl);
+
+ if (!skb &&
+ test_and_clear_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags)) {
+ skb = wl->dummy_packet;
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ wl->tx_queue_count--;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+ }
+
+ return skb;
}
static void wl1271_skb_queue_head(struct wl1271 *wl, struct sk_buff *skb)
@@ -436,7 +545,9 @@
unsigned long flags;
int q = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
- if (wl->bss_type == BSS_TYPE_AP_BSS) {
+ if (wl12xx_is_dummy_packet(wl, skb)) {
+ set_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags);
+ } else if (wl->bss_type == BSS_TYPE_AP_BSS) {
u8 hlid = wl1271_tx_get_hlid(skb);
skb_queue_head(&wl->links[hlid].tx_queue[q], skb);
@@ -454,22 +565,14 @@
void wl1271_tx_work_locked(struct wl1271 *wl)
{
struct sk_buff *skb;
- bool woken_up = false;
u32 buf_offset = 0;
bool sent_packets = false;
int ret;
if (unlikely(wl->state == WL1271_STATE_OFF))
- goto out;
+ return;
while ((skb = wl1271_skb_dequeue(wl))) {
- if (!woken_up) {
- ret = wl1271_ps_elp_wakeup(wl);
- if (ret < 0)
- goto out_ack;
- woken_up = true;
- }
-
ret = wl1271_prepare_tx_frame(wl, skb, buf_offset);
if (ret == -EAGAIN) {
/*
@@ -516,18 +619,22 @@
wl1271_handle_tx_low_watermark(wl);
}
-
-out:
- if (woken_up)
- wl1271_ps_elp_sleep(wl);
}
void wl1271_tx_work(struct work_struct *work)
{
struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
+ int ret;
mutex_lock(&wl->mutex);
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
wl1271_tx_work_locked(wl);
+
+ wl1271_ps_elp_sleep(wl);
+out:
mutex_unlock(&wl->mutex);
}
@@ -549,6 +656,11 @@
skb = wl->tx_frames[id];
info = IEEE80211_SKB_CB(skb);
+ if (wl12xx_is_dummy_packet(wl, skb)) {
+ wl1271_free_tx_id(wl, id);
+ return;
+ }
+
/* update the TX status info */
if (result->status == TX_SUCCESS) {
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
@@ -657,8 +769,8 @@
wl1271_handle_tx_low_watermark(wl);
}
-/* caller must hold wl->mutex */
-void wl1271_tx_reset(struct wl1271 *wl)
+/* caller must hold wl->mutex and TX must be stopped */
+void wl1271_tx_reset(struct wl1271 *wl, bool reset_tx_queues)
{
int i;
struct sk_buff *skb;
@@ -678,10 +790,13 @@
while ((skb = skb_dequeue(&wl->tx_queue[i]))) {
wl1271_debug(DEBUG_TX, "freeing skb 0x%p",
skb);
- info = IEEE80211_SKB_CB(skb);
- info->status.rates[0].idx = -1;
- info->status.rates[0].count = 0;
- ieee80211_tx_status(wl->hw, skb);
+
+ if (!wl12xx_is_dummy_packet(wl, skb)) {
+ info = IEEE80211_SKB_CB(skb);
+ info->status.rates[0].idx = -1;
+ info->status.rates[0].count = 0;
+ ieee80211_tx_status(wl->hw, skb);
+ }
}
}
}
@@ -691,8 +806,10 @@
/*
* Make sure the driver is at a consistent state, in case this
* function is called from a context other than interface removal.
+ * This call will always wake the TX queues.
*/
- wl1271_handle_tx_low_watermark(wl);
+ if (reset_tx_queues)
+ wl1271_handle_tx_low_watermark(wl);
for (i = 0; i < ACX_TX_DESCRIPTORS; i++) {
if (wl->tx_frames[i] == NULL)
@@ -702,21 +819,27 @@
wl1271_free_tx_id(wl, i);
wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
- /* Remove private headers before passing the skb to mac80211 */
- info = IEEE80211_SKB_CB(skb);
- skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
- if (info->control.hw_key &&
- info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
- int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data,
- hdrlen);
- skb_pull(skb, WL1271_TKIP_IV_SPACE);
+ if (!wl12xx_is_dummy_packet(wl, skb)) {
+ /*
+ * Remove private headers before passing the skb to
+ * mac80211
+ */
+ info = IEEE80211_SKB_CB(skb);
+ skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
+ if (info->control.hw_key &&
+ info->control.hw_key->cipher ==
+ WLAN_CIPHER_SUITE_TKIP) {
+ int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ memmove(skb->data + WL1271_TKIP_IV_SPACE,
+ skb->data, hdrlen);
+ skb_pull(skb, WL1271_TKIP_IV_SPACE);
+ }
+
+ info->status.rates[0].idx = -1;
+ info->status.rates[0].count = 0;
+
+ ieee80211_tx_status(wl->hw, skb);
}
-
- info->status.rates[0].idx = -1;
- info->status.rates[0].count = 0;
-
- ieee80211_tx_status(wl->hw, skb);
}
}
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
index 02f07fa..832f925 100644
--- a/drivers/net/wireless/wl12xx/tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -25,7 +25,6 @@
#ifndef __TX_H__
#define __TX_H__
-#define TX_HW_BLOCK_SPARE 2
#define TX_HW_BLOCK_SIZE 252
#define TX_HW_MGMT_PKT_LIFETIME_TU 2000
@@ -41,6 +40,7 @@
BIT(8) | BIT(9))
#define TX_HW_ATTR_LAST_WORD_PAD (BIT(10) | BIT(11))
#define TX_HW_ATTR_TX_CMPLT_REQ BIT(12)
+#define TX_HW_ATTR_TX_DUMMY_REQ BIT(13)
#define TX_HW_ATTR_OFST_SAVE_RETRIES 0
#define TX_HW_ATTR_OFST_HEADER_PAD 1
@@ -55,20 +55,60 @@
#define WL1271_TX_ALIGN_TO 4
#define WL1271_TKIP_IV_SPACE 4
+/* Used for management frames and dummy packets */
+#define WL1271_TID_MGMT 7
+
+struct wl127x_tx_mem {
+ /*
+ * Number of extra memory blocks to allocate for this packet
+ * in addition to the number of blocks derived from the packet
+ * length.
+ */
+ u8 extra_blocks;
+ /*
+ * Total number of memory blocks allocated by the host for
+ * this packet. Must be equal or greater than the actual
+ * blocks number allocated by HW.
+ */
+ u8 total_mem_blocks;
+} __packed;
+
+struct wl128x_tx_mem {
+ /*
+ * Total number of memory blocks allocated by the host for
+ * this packet.
+ */
+ u8 total_mem_blocks;
+ /*
+ * Number of extra bytes, at the end of the frame. the host
+ * uses this padding to complete each frame to integer number
+ * of SDIO blocks.
+ */
+ u8 extra_bytes;
+} __packed;
+
+/*
+ * On wl128x based devices, when TX packets are aggregated, each packet
+ * size must be aligned to the SDIO block size. The maximum block size
+ * is bounded by the type of the padded bytes field that is sent to the
+ * FW. Currently the type is u8, so the maximum block size is 256 bytes.
+ */
+#define WL12XX_BUS_BLOCK_SIZE min(512u, \
+ (1u << (8 * sizeof(((struct wl128x_tx_mem *) 0)->extra_bytes))))
+
struct wl1271_tx_hw_descr {
/* Length of packet in words, including descriptor+header+data */
__le16 length;
- /* Number of extra memory blocks to allocate for this packet in
- addition to the number of blocks derived from the packet length */
- u8 extra_mem_blocks;
- /* Total number of memory blocks allocated by the host for this packet.
- Must be equal or greater than the actual blocks number allocated by
- HW!! */
- u8 total_mem_blocks;
+ union {
+ struct wl127x_tx_mem wl127x_mem;
+ struct wl128x_tx_mem wl128x_mem;
+ } __packed;
/* Device time (in us) when the packet arrived to the driver */
__le32 start_time;
- /* Max delay in TUs until transmission. The last device time the
- packet can be transmitted is: startTime+(1024*LifeTime) */
+ /*
+ * Max delay in TUs until transmission. The last device time the
+ * packet can be transmitted is: start_time + (1024 * life_time)
+ */
__le16 life_time;
/* Bitwise fields - see TX_ATTR... definitions above. */
__le16 tx_attr;
@@ -145,7 +185,7 @@
void wl1271_tx_work(struct work_struct *work);
void wl1271_tx_work_locked(struct wl1271 *wl);
void wl1271_tx_complete(struct wl1271 *wl);
-void wl1271_tx_reset(struct wl1271 *wl);
+void wl1271_tx_reset(struct wl1271 *wl, bool reset_tx_queues);
void wl1271_tx_flush(struct wl1271 *wl);
u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set);
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 86be83e..fbe8f46 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -131,9 +131,16 @@
#define WL1271_FW_NAME "ti-connectivity/wl1271-fw-2.bin"
-#define WL1271_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
+#define WL128X_FW_NAME "ti-connectivity/wl128x-fw.bin"
+#define WL127X_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
+#define WL128X_AP_FW_NAME "ti-connectivity/wl128x-fw-ap.bin"
-#define WL1271_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
+/*
+ * wl127x and wl128x are using the same NVS file name. However, the
+ * ini parameters between them are different. The driver validates
+ * the correct NVS size in wl1271_boot_upload_nvs().
+ */
+#define WL12XX_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
#define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
#define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
@@ -200,13 +207,29 @@
struct wl1271;
-#define WL12XX_NUM_FW_VER 5
+enum {
+ FW_VER_CHIP,
+ FW_VER_IF_TYPE,
+ FW_VER_MAJOR,
+ FW_VER_SUBTYPE,
+ FW_VER_MINOR,
-/* FIXME: I'm not sure about this structure name */
+ NUM_FW_VER
+};
+
+#define FW_VER_CHIP_WL127X 6
+#define FW_VER_CHIP_WL128X 7
+
+#define FW_VER_IF_TYPE_STA 1
+#define FW_VER_IF_TYPE_AP 2
+
+#define FW_VER_MINOR_1_SPARE_STA_MIN 58
+#define FW_VER_MINOR_1_SPARE_AP_MIN 47
+
struct wl1271_chip {
u32 id;
char fw_ver_str[ETHTOOL_BUSINFO_LEN];
- unsigned int fw_ver[WL12XX_NUM_FW_VER];
+ unsigned int fw_ver[NUM_FW_VER];
};
struct wl1271_stats {
@@ -261,6 +284,8 @@
u8 tx_total;
u8 reserved1;
__le16 reserved2;
+ /* Total structure size is 68 bytes */
+ u32 padding;
} __packed;
struct wl1271_fw_full_status {
@@ -277,9 +302,10 @@
u32 addr_extra;
};
+#define WL1271_MAX_CHANNELS 64
struct wl1271_scan {
struct cfg80211_scan_request *req;
- bool *scanned_ch;
+ unsigned long scanned_ch[BITS_TO_LONGS(WL1271_MAX_CHANNELS)];
bool failed;
u8 state;
u8 ssid[IW_ESSID_MAX_SIZE+1];
@@ -297,6 +323,7 @@
struct device* (*dev)(struct wl1271 *wl);
void (*enable_irq)(struct wl1271 *wl);
void (*disable_irq)(struct wl1271 *wl);
+ void (*set_block_size) (struct wl1271 *wl, unsigned int blksz);
};
#define MAX_NUM_KEYS 14
@@ -319,15 +346,19 @@
WL1271_FLAG_TX_QUEUE_STOPPED,
WL1271_FLAG_TX_PENDING,
WL1271_FLAG_IN_ELP,
+ WL1271_FLAG_ELP_REQUESTED,
WL1271_FLAG_PSM,
WL1271_FLAG_PSM_REQUESTED,
WL1271_FLAG_IRQ_RUNNING,
WL1271_FLAG_IDLE,
- WL1271_FLAG_IDLE_REQUESTED,
WL1271_FLAG_PSPOLL_FAILURE,
WL1271_FLAG_STA_STATE_SENT,
WL1271_FLAG_FW_TX_BUSY,
- WL1271_FLAG_AP_STARTED
+ WL1271_FLAG_AP_STARTED,
+ WL1271_FLAG_IF_INITIALIZED,
+ WL1271_FLAG_DUMMY_PACKET_PENDING,
+ WL1271_FLAG_SUSPENDED,
+ WL1271_FLAG_PENDING_WORK,
};
struct wl1271_link {
@@ -371,7 +402,7 @@
u8 *fw;
size_t fw_len;
u8 fw_bss_type;
- struct wl1271_nvs_file *nvs;
+ void *nvs;
size_t nvs_len;
s8 hw_pg_ver;
@@ -389,6 +420,7 @@
/* Accounting for allocated / available TX blocks on HW */
u32 tx_blocks_freed[NUM_TX_QUEUES];
u32 tx_blocks_available;
+ u32 tx_allocated_blocks;
u32 tx_results_count;
/* Transmitted TX packets counter for chipset interface */
@@ -430,6 +462,9 @@
/* Intermediate buffer, used for packet aggregation */
u8 *aggr_buf;
+ /* Reusable dummy packet template */
+ struct sk_buff *dummy_packet;
+
/* Network stack work */
struct work_struct netstack_work;
@@ -446,6 +481,8 @@
struct wl1271_scan scan;
struct delayed_work scan_complete_work;
+ bool sched_scanning;
+
/* probe-req template for the current AP */
struct sk_buff *probereq;
@@ -476,6 +513,7 @@
unsigned int rx_filter;
struct completion *elp_compl;
+ struct completion *ps_compl;
struct delayed_work elp_work;
struct delayed_work pspoll_work;
@@ -527,6 +565,14 @@
bool ba_support;
u8 ba_rx_bitmap;
+ int tcxo_clock;
+
+ /*
+ * wowlan trigger was configured during suspend.
+ * (currently, only "ANY" trigger is supported)
+ */
+ bool wow_enabled;
+
/*
* AP-mode - links indexed by HLID. The global and broadcast links
* are always active.
@@ -544,6 +590,9 @@
/* Quirks of specific hardware revisions */
unsigned int quirks;
+
+ /* Platform limitations */
+ unsigned int platform_quirks;
};
struct wl1271_station {
@@ -576,6 +625,15 @@
/* Quirks */
/* Each RX/TX transaction requires an end-of-transaction transfer */
-#define WL12XX_QUIRK_END_OF_TRANSACTION BIT(0)
+#define WL12XX_QUIRK_END_OF_TRANSACTION BIT(0)
+
+/*
+ * Older firmwares use 2 spare TX blocks
+ * (for STA < 6.1.3.50.58 or for AP < 6.2.0.0.47)
+ */
+#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS BIT(1)
+
+/* WL128X requires aggregated packets to be aligned to the SDIO block size */
+#define WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT BIT(2)
#endif
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index a73a305..ff306d7 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -557,7 +557,7 @@
return r;
}
-/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
+/* ZD_CR157 can be optionally patched by the EEPROM for original ZD1211 */
static int patch_cr157(struct zd_chip *chip)
{
int r;
@@ -571,7 +571,7 @@
return r;
dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value >> 8);
- return zd_iowrite32_locked(chip, value >> 8, CR157);
+ return zd_iowrite32_locked(chip, value >> 8, ZD_CR157);
}
/*
@@ -593,8 +593,8 @@
int zd_chip_generic_patch_6m_band(struct zd_chip *chip, int channel)
{
struct zd_ioreq16 ioreqs[] = {
- { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
- { CR47, 0x1e },
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 },
+ { ZD_CR47, 0x1e },
};
/* FIXME: Channel 11 is not the edge for all regulatory domains. */
@@ -608,69 +608,69 @@
static int zd1211_hw_reset_phy(struct zd_chip *chip)
{
static const struct zd_ioreq16 ioreqs[] = {
- { CR0, 0x0a }, { CR1, 0x06 }, { CR2, 0x26 },
- { CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xa0 },
- { CR10, 0x81 }, { CR11, 0x00 }, { CR12, 0x7f },
- { CR13, 0x8c }, { CR14, 0x80 }, { CR15, 0x3d },
- { CR16, 0x20 }, { CR17, 0x1e }, { CR18, 0x0a },
- { CR19, 0x48 }, { CR20, 0x0c }, { CR21, 0x0c },
- { CR22, 0x23 }, { CR23, 0x90 }, { CR24, 0x14 },
- { CR25, 0x40 }, { CR26, 0x10 }, { CR27, 0x19 },
- { CR28, 0x7f }, { CR29, 0x80 }, { CR30, 0x4b },
- { CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 },
- { CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 },
- { CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c },
- { CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 },
- { CR43, 0x10 }, { CR44, 0x12 }, { CR46, 0xff },
- { CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b },
- { CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 },
- { CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 },
- { CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff },
- { CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 },
- { CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 },
- { CR79, 0x68 }, { CR80, 0x64 }, { CR81, 0x64 },
- { CR82, 0x00 }, { CR83, 0x00 }, { CR84, 0x00 },
- { CR85, 0x02 }, { CR86, 0x00 }, { CR87, 0x00 },
- { CR88, 0xff }, { CR89, 0xfc }, { CR90, 0x00 },
- { CR91, 0x00 }, { CR92, 0x00 }, { CR93, 0x08 },
- { CR94, 0x00 }, { CR95, 0x00 }, { CR96, 0xff },
- { CR97, 0xe7 }, { CR98, 0x00 }, { CR99, 0x00 },
- { CR100, 0x00 }, { CR101, 0xae }, { CR102, 0x02 },
- { CR103, 0x00 }, { CR104, 0x03 }, { CR105, 0x65 },
- { CR106, 0x04 }, { CR107, 0x00 }, { CR108, 0x0a },
- { CR109, 0xaa }, { CR110, 0xaa }, { CR111, 0x25 },
- { CR112, 0x25 }, { CR113, 0x00 }, { CR119, 0x1e },
- { CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 },
+ { ZD_CR0, 0x0a }, { ZD_CR1, 0x06 }, { ZD_CR2, 0x26 },
+ { ZD_CR3, 0x38 }, { ZD_CR4, 0x80 }, { ZD_CR9, 0xa0 },
+ { ZD_CR10, 0x81 }, { ZD_CR11, 0x00 }, { ZD_CR12, 0x7f },
+ { ZD_CR13, 0x8c }, { ZD_CR14, 0x80 }, { ZD_CR15, 0x3d },
+ { ZD_CR16, 0x20 }, { ZD_CR17, 0x1e }, { ZD_CR18, 0x0a },
+ { ZD_CR19, 0x48 }, { ZD_CR20, 0x0c }, { ZD_CR21, 0x0c },
+ { ZD_CR22, 0x23 }, { ZD_CR23, 0x90 }, { ZD_CR24, 0x14 },
+ { ZD_CR25, 0x40 }, { ZD_CR26, 0x10 }, { ZD_CR27, 0x19 },
+ { ZD_CR28, 0x7f }, { ZD_CR29, 0x80 }, { ZD_CR30, 0x4b },
+ { ZD_CR31, 0x60 }, { ZD_CR32, 0x43 }, { ZD_CR33, 0x08 },
+ { ZD_CR34, 0x06 }, { ZD_CR35, 0x0a }, { ZD_CR36, 0x00 },
+ { ZD_CR37, 0x00 }, { ZD_CR38, 0x38 }, { ZD_CR39, 0x0c },
+ { ZD_CR40, 0x84 }, { ZD_CR41, 0x2a }, { ZD_CR42, 0x80 },
+ { ZD_CR43, 0x10 }, { ZD_CR44, 0x12 }, { ZD_CR46, 0xff },
+ { ZD_CR47, 0x1E }, { ZD_CR48, 0x26 }, { ZD_CR49, 0x5b },
+ { ZD_CR64, 0xd0 }, { ZD_CR65, 0x04 }, { ZD_CR66, 0x58 },
+ { ZD_CR67, 0xc9 }, { ZD_CR68, 0x88 }, { ZD_CR69, 0x41 },
+ { ZD_CR70, 0x23 }, { ZD_CR71, 0x10 }, { ZD_CR72, 0xff },
+ { ZD_CR73, 0x32 }, { ZD_CR74, 0x30 }, { ZD_CR75, 0x65 },
+ { ZD_CR76, 0x41 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x30 },
+ { ZD_CR79, 0x68 }, { ZD_CR80, 0x64 }, { ZD_CR81, 0x64 },
+ { ZD_CR82, 0x00 }, { ZD_CR83, 0x00 }, { ZD_CR84, 0x00 },
+ { ZD_CR85, 0x02 }, { ZD_CR86, 0x00 }, { ZD_CR87, 0x00 },
+ { ZD_CR88, 0xff }, { ZD_CR89, 0xfc }, { ZD_CR90, 0x00 },
+ { ZD_CR91, 0x00 }, { ZD_CR92, 0x00 }, { ZD_CR93, 0x08 },
+ { ZD_CR94, 0x00 }, { ZD_CR95, 0x00 }, { ZD_CR96, 0xff },
+ { ZD_CR97, 0xe7 }, { ZD_CR98, 0x00 }, { ZD_CR99, 0x00 },
+ { ZD_CR100, 0x00 }, { ZD_CR101, 0xae }, { ZD_CR102, 0x02 },
+ { ZD_CR103, 0x00 }, { ZD_CR104, 0x03 }, { ZD_CR105, 0x65 },
+ { ZD_CR106, 0x04 }, { ZD_CR107, 0x00 }, { ZD_CR108, 0x0a },
+ { ZD_CR109, 0xaa }, { ZD_CR110, 0xaa }, { ZD_CR111, 0x25 },
+ { ZD_CR112, 0x25 }, { ZD_CR113, 0x00 }, { ZD_CR119, 0x1e },
+ { ZD_CR125, 0x90 }, { ZD_CR126, 0x00 }, { ZD_CR127, 0x00 },
{ },
- { CR5, 0x00 }, { CR6, 0x00 }, { CR7, 0x00 },
- { CR8, 0x00 }, { CR9, 0x20 }, { CR12, 0xf0 },
- { CR20, 0x0e }, { CR21, 0x0e }, { CR27, 0x10 },
- { CR44, 0x33 }, { CR47, 0x1E }, { CR83, 0x24 },
- { CR84, 0x04 }, { CR85, 0x00 }, { CR86, 0x0C },
- { CR87, 0x12 }, { CR88, 0x0C }, { CR89, 0x00 },
- { CR90, 0x10 }, { CR91, 0x08 }, { CR93, 0x00 },
- { CR94, 0x01 }, { CR95, 0x00 }, { CR96, 0x50 },
- { CR97, 0x37 }, { CR98, 0x35 }, { CR101, 0x13 },
- { CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 },
- { CR105, 0x12 }, { CR109, 0x27 }, { CR110, 0x27 },
- { CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 },
- { CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 },
- { CR117, 0xfc }, { CR118, 0xfa }, { CR120, 0x4f },
- { CR125, 0xaa }, { CR127, 0x03 }, { CR128, 0x14 },
- { CR129, 0x12 }, { CR130, 0x10 }, { CR131, 0x0C },
- { CR136, 0xdf }, { CR137, 0x40 }, { CR138, 0xa0 },
- { CR139, 0xb0 }, { CR140, 0x99 }, { CR141, 0x82 },
- { CR142, 0x54 }, { CR143, 0x1c }, { CR144, 0x6c },
- { CR147, 0x07 }, { CR148, 0x4c }, { CR149, 0x50 },
- { CR150, 0x0e }, { CR151, 0x18 }, { CR160, 0xfe },
- { CR161, 0xee }, { CR162, 0xaa }, { CR163, 0xfa },
- { CR164, 0xfa }, { CR165, 0xea }, { CR166, 0xbe },
- { CR167, 0xbe }, { CR168, 0x6a }, { CR169, 0xba },
- { CR170, 0xba }, { CR171, 0xba },
- /* Note: CR204 must lead the CR203 */
- { CR204, 0x7d },
+ { ZD_CR5, 0x00 }, { ZD_CR6, 0x00 }, { ZD_CR7, 0x00 },
+ { ZD_CR8, 0x00 }, { ZD_CR9, 0x20 }, { ZD_CR12, 0xf0 },
+ { ZD_CR20, 0x0e }, { ZD_CR21, 0x0e }, { ZD_CR27, 0x10 },
+ { ZD_CR44, 0x33 }, { ZD_CR47, 0x1E }, { ZD_CR83, 0x24 },
+ { ZD_CR84, 0x04 }, { ZD_CR85, 0x00 }, { ZD_CR86, 0x0C },
+ { ZD_CR87, 0x12 }, { ZD_CR88, 0x0C }, { ZD_CR89, 0x00 },
+ { ZD_CR90, 0x10 }, { ZD_CR91, 0x08 }, { ZD_CR93, 0x00 },
+ { ZD_CR94, 0x01 }, { ZD_CR95, 0x00 }, { ZD_CR96, 0x50 },
+ { ZD_CR97, 0x37 }, { ZD_CR98, 0x35 }, { ZD_CR101, 0x13 },
+ { ZD_CR102, 0x27 }, { ZD_CR103, 0x27 }, { ZD_CR104, 0x18 },
+ { ZD_CR105, 0x12 }, { ZD_CR109, 0x27 }, { ZD_CR110, 0x27 },
+ { ZD_CR111, 0x27 }, { ZD_CR112, 0x27 }, { ZD_CR113, 0x27 },
+ { ZD_CR114, 0x27 }, { ZD_CR115, 0x26 }, { ZD_CR116, 0x24 },
+ { ZD_CR117, 0xfc }, { ZD_CR118, 0xfa }, { ZD_CR120, 0x4f },
+ { ZD_CR125, 0xaa }, { ZD_CR127, 0x03 }, { ZD_CR128, 0x14 },
+ { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, { ZD_CR131, 0x0C },
+ { ZD_CR136, 0xdf }, { ZD_CR137, 0x40 }, { ZD_CR138, 0xa0 },
+ { ZD_CR139, 0xb0 }, { ZD_CR140, 0x99 }, { ZD_CR141, 0x82 },
+ { ZD_CR142, 0x54 }, { ZD_CR143, 0x1c }, { ZD_CR144, 0x6c },
+ { ZD_CR147, 0x07 }, { ZD_CR148, 0x4c }, { ZD_CR149, 0x50 },
+ { ZD_CR150, 0x0e }, { ZD_CR151, 0x18 }, { ZD_CR160, 0xfe },
+ { ZD_CR161, 0xee }, { ZD_CR162, 0xaa }, { ZD_CR163, 0xfa },
+ { ZD_CR164, 0xfa }, { ZD_CR165, 0xea }, { ZD_CR166, 0xbe },
+ { ZD_CR167, 0xbe }, { ZD_CR168, 0x6a }, { ZD_CR169, 0xba },
+ { ZD_CR170, 0xba }, { ZD_CR171, 0xba },
+ /* Note: ZD_CR204 must lead the ZD_CR203 */
+ { ZD_CR204, 0x7d },
{ },
- { CR203, 0x30 },
+ { ZD_CR203, 0x30 },
};
int r, t;
@@ -697,62 +697,62 @@
static int zd1211b_hw_reset_phy(struct zd_chip *chip)
{
static const struct zd_ioreq16 ioreqs[] = {
- { CR0, 0x14 }, { CR1, 0x06 }, { CR2, 0x26 },
- { CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xe0 },
- { CR10, 0x81 },
- /* power control { { CR11, 1 << 6 }, */
- { CR11, 0x00 },
- { CR12, 0xf0 }, { CR13, 0x8c }, { CR14, 0x80 },
- { CR15, 0x3d }, { CR16, 0x20 }, { CR17, 0x1e },
- { CR18, 0x0a }, { CR19, 0x48 },
- { CR20, 0x10 }, /* Org:0x0E, ComTrend:RalLink AP */
- { CR21, 0x0e }, { CR22, 0x23 }, { CR23, 0x90 },
- { CR24, 0x14 }, { CR25, 0x40 }, { CR26, 0x10 },
- { CR27, 0x10 }, { CR28, 0x7f }, { CR29, 0x80 },
- { CR30, 0x4b }, /* ASIC/FWT, no jointly decoder */
- { CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 },
- { CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 },
- { CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c },
- { CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 },
- { CR43, 0x10 }, { CR44, 0x33 }, { CR46, 0xff },
- { CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b },
- { CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 },
- { CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 },
- { CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff },
- { CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 },
- { CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 },
- { CR79, 0xf0 }, { CR80, 0x64 }, { CR81, 0x64 },
- { CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 },
- { CR85, 0x00 }, { CR86, 0x0c }, { CR87, 0x12 },
- { CR88, 0x0c }, { CR89, 0x00 }, { CR90, 0x58 },
- { CR91, 0x04 }, { CR92, 0x00 }, { CR93, 0x00 },
- { CR94, 0x01 },
- { CR95, 0x20 }, /* ZD1211B */
- { CR96, 0x50 }, { CR97, 0x37 }, { CR98, 0x35 },
- { CR99, 0x00 }, { CR100, 0x01 }, { CR101, 0x13 },
- { CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 },
- { CR105, 0x12 }, { CR106, 0x04 }, { CR107, 0x00 },
- { CR108, 0x0a }, { CR109, 0x27 }, { CR110, 0x27 },
- { CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 },
- { CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 },
- { CR117, 0xfc }, { CR118, 0xfa }, { CR119, 0x1e },
- { CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 },
- { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
- { CR131, 0x0c }, { CR136, 0xdf }, { CR137, 0xa0 },
- { CR138, 0xa8 }, { CR139, 0xb4 }, { CR140, 0x98 },
- { CR141, 0x82 }, { CR142, 0x53 }, { CR143, 0x1c },
- { CR144, 0x6c }, { CR147, 0x07 }, { CR148, 0x40 },
- { CR149, 0x40 }, /* Org:0x50 ComTrend:RalLink AP */
- { CR150, 0x14 }, /* Org:0x0E ComTrend:RalLink AP */
- { CR151, 0x18 }, { CR159, 0x70 }, { CR160, 0xfe },
- { CR161, 0xee }, { CR162, 0xaa }, { CR163, 0xfa },
- { CR164, 0xfa }, { CR165, 0xea }, { CR166, 0xbe },
- { CR167, 0xbe }, { CR168, 0x6a }, { CR169, 0xba },
- { CR170, 0xba }, { CR171, 0xba },
- /* Note: CR204 must lead the CR203 */
- { CR204, 0x7d },
+ { ZD_CR0, 0x14 }, { ZD_CR1, 0x06 }, { ZD_CR2, 0x26 },
+ { ZD_CR3, 0x38 }, { ZD_CR4, 0x80 }, { ZD_CR9, 0xe0 },
+ { ZD_CR10, 0x81 },
+ /* power control { { ZD_CR11, 1 << 6 }, */
+ { ZD_CR11, 0x00 },
+ { ZD_CR12, 0xf0 }, { ZD_CR13, 0x8c }, { ZD_CR14, 0x80 },
+ { ZD_CR15, 0x3d }, { ZD_CR16, 0x20 }, { ZD_CR17, 0x1e },
+ { ZD_CR18, 0x0a }, { ZD_CR19, 0x48 },
+ { ZD_CR20, 0x10 }, /* Org:0x0E, ComTrend:RalLink AP */
+ { ZD_CR21, 0x0e }, { ZD_CR22, 0x23 }, { ZD_CR23, 0x90 },
+ { ZD_CR24, 0x14 }, { ZD_CR25, 0x40 }, { ZD_CR26, 0x10 },
+ { ZD_CR27, 0x10 }, { ZD_CR28, 0x7f }, { ZD_CR29, 0x80 },
+ { ZD_CR30, 0x4b }, /* ASIC/FWT, no jointly decoder */
+ { ZD_CR31, 0x60 }, { ZD_CR32, 0x43 }, { ZD_CR33, 0x08 },
+ { ZD_CR34, 0x06 }, { ZD_CR35, 0x0a }, { ZD_CR36, 0x00 },
+ { ZD_CR37, 0x00 }, { ZD_CR38, 0x38 }, { ZD_CR39, 0x0c },
+ { ZD_CR40, 0x84 }, { ZD_CR41, 0x2a }, { ZD_CR42, 0x80 },
+ { ZD_CR43, 0x10 }, { ZD_CR44, 0x33 }, { ZD_CR46, 0xff },
+ { ZD_CR47, 0x1E }, { ZD_CR48, 0x26 }, { ZD_CR49, 0x5b },
+ { ZD_CR64, 0xd0 }, { ZD_CR65, 0x04 }, { ZD_CR66, 0x58 },
+ { ZD_CR67, 0xc9 }, { ZD_CR68, 0x88 }, { ZD_CR69, 0x41 },
+ { ZD_CR70, 0x23 }, { ZD_CR71, 0x10 }, { ZD_CR72, 0xff },
+ { ZD_CR73, 0x32 }, { ZD_CR74, 0x30 }, { ZD_CR75, 0x65 },
+ { ZD_CR76, 0x41 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x30 },
+ { ZD_CR79, 0xf0 }, { ZD_CR80, 0x64 }, { ZD_CR81, 0x64 },
+ { ZD_CR82, 0x00 }, { ZD_CR83, 0x24 }, { ZD_CR84, 0x04 },
+ { ZD_CR85, 0x00 }, { ZD_CR86, 0x0c }, { ZD_CR87, 0x12 },
+ { ZD_CR88, 0x0c }, { ZD_CR89, 0x00 }, { ZD_CR90, 0x58 },
+ { ZD_CR91, 0x04 }, { ZD_CR92, 0x00 }, { ZD_CR93, 0x00 },
+ { ZD_CR94, 0x01 },
+ { ZD_CR95, 0x20 }, /* ZD1211B */
+ { ZD_CR96, 0x50 }, { ZD_CR97, 0x37 }, { ZD_CR98, 0x35 },
+ { ZD_CR99, 0x00 }, { ZD_CR100, 0x01 }, { ZD_CR101, 0x13 },
+ { ZD_CR102, 0x27 }, { ZD_CR103, 0x27 }, { ZD_CR104, 0x18 },
+ { ZD_CR105, 0x12 }, { ZD_CR106, 0x04 }, { ZD_CR107, 0x00 },
+ { ZD_CR108, 0x0a }, { ZD_CR109, 0x27 }, { ZD_CR110, 0x27 },
+ { ZD_CR111, 0x27 }, { ZD_CR112, 0x27 }, { ZD_CR113, 0x27 },
+ { ZD_CR114, 0x27 }, { ZD_CR115, 0x26 }, { ZD_CR116, 0x24 },
+ { ZD_CR117, 0xfc }, { ZD_CR118, 0xfa }, { ZD_CR119, 0x1e },
+ { ZD_CR125, 0x90 }, { ZD_CR126, 0x00 }, { ZD_CR127, 0x00 },
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 },
+ { ZD_CR131, 0x0c }, { ZD_CR136, 0xdf }, { ZD_CR137, 0xa0 },
+ { ZD_CR138, 0xa8 }, { ZD_CR139, 0xb4 }, { ZD_CR140, 0x98 },
+ { ZD_CR141, 0x82 }, { ZD_CR142, 0x53 }, { ZD_CR143, 0x1c },
+ { ZD_CR144, 0x6c }, { ZD_CR147, 0x07 }, { ZD_CR148, 0x40 },
+ { ZD_CR149, 0x40 }, /* Org:0x50 ComTrend:RalLink AP */
+ { ZD_CR150, 0x14 }, /* Org:0x0E ComTrend:RalLink AP */
+ { ZD_CR151, 0x18 }, { ZD_CR159, 0x70 }, { ZD_CR160, 0xfe },
+ { ZD_CR161, 0xee }, { ZD_CR162, 0xaa }, { ZD_CR163, 0xfa },
+ { ZD_CR164, 0xfa }, { ZD_CR165, 0xea }, { ZD_CR166, 0xbe },
+ { ZD_CR167, 0xbe }, { ZD_CR168, 0x6a }, { ZD_CR169, 0xba },
+ { ZD_CR170, 0xba }, { ZD_CR171, 0xba },
+ /* Note: ZD_CR204 must lead the ZD_CR203 */
+ { ZD_CR204, 0x7d },
{},
- { CR203, 0x30 },
+ { ZD_CR203, 0x30 },
};
int r, t;
@@ -1200,24 +1200,24 @@
static int update_pwr_int(struct zd_chip *chip, u8 channel)
{
u8 value = chip->pwr_int_values[channel - 1];
- return zd_iowrite16_locked(chip, value, CR31);
+ return zd_iowrite16_locked(chip, value, ZD_CR31);
}
static int update_pwr_cal(struct zd_chip *chip, u8 channel)
{
u8 value = chip->pwr_cal_values[channel-1];
- return zd_iowrite16_locked(chip, value, CR68);
+ return zd_iowrite16_locked(chip, value, ZD_CR68);
}
static int update_ofdm_cal(struct zd_chip *chip, u8 channel)
{
struct zd_ioreq16 ioreqs[3];
- ioreqs[0].addr = CR67;
+ ioreqs[0].addr = ZD_CR67;
ioreqs[0].value = chip->ofdm_cal_values[OFDM_36M_INDEX][channel-1];
- ioreqs[1].addr = CR66;
+ ioreqs[1].addr = ZD_CR66;
ioreqs[1].value = chip->ofdm_cal_values[OFDM_48M_INDEX][channel-1];
- ioreqs[2].addr = CR65;
+ ioreqs[2].addr = ZD_CR65;
ioreqs[2].value = chip->ofdm_cal_values[OFDM_54M_INDEX][channel-1];
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -1236,9 +1236,9 @@
return r;
if (zd_chip_is_zd1211b(chip)) {
static const struct zd_ioreq16 ioreqs[] = {
- { CR69, 0x28 },
+ { ZD_CR69, 0x28 },
{},
- { CR69, 0x2a },
+ { ZD_CR69, 0x2a },
};
r = update_ofdm_cal(chip, channel);
@@ -1269,7 +1269,7 @@
if (r)
return r;
dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value & 0xff);
- return zd_iowrite16_locked(chip, value & 0xff, CR47);
+ return zd_iowrite16_locked(chip, value & 0xff, ZD_CR47);
}
int zd_chip_set_channel(struct zd_chip *chip, u8 channel)
@@ -1505,9 +1505,9 @@
int zd_rfwrite_cr_locked(struct zd_chip *chip, u32 value)
{
const struct zd_ioreq16 ioreqs[] = {
- { CR244, (value >> 16) & 0xff },
- { CR243, (value >> 8) & 0xff },
- { CR242, value & 0xff },
+ { ZD_CR244, (value >> 16) & 0xff },
+ { ZD_CR243, (value >> 8) & 0xff },
+ { ZD_CR242, value & 0xff },
};
ZD_ASSERT(mutex_is_locked(&chip->mutex));
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 14e4402..4be7c3b 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -61,277 +61,288 @@
#define FWRAW_DATA(offset) ((zd_addr_t)(FW_START + (offset)))
/* 8-bit hardware registers */
-#define CR0 CTL_REG(0x0000)
-#define CR1 CTL_REG(0x0004)
-#define CR2 CTL_REG(0x0008)
-#define CR3 CTL_REG(0x000C)
+#define ZD_CR0 CTL_REG(0x0000)
+#define ZD_CR1 CTL_REG(0x0004)
+#define ZD_CR2 CTL_REG(0x0008)
+#define ZD_CR3 CTL_REG(0x000C)
-#define CR5 CTL_REG(0x0010)
+#define ZD_CR5 CTL_REG(0x0010)
/* bit 5: if set short preamble used
* bit 6: filter band - Japan channel 14 on, else off
*/
-#define CR6 CTL_REG(0x0014)
-#define CR7 CTL_REG(0x0018)
-#define CR8 CTL_REG(0x001C)
+#define ZD_CR6 CTL_REG(0x0014)
+#define ZD_CR7 CTL_REG(0x0018)
+#define ZD_CR8 CTL_REG(0x001C)
-#define CR4 CTL_REG(0x0020)
+#define ZD_CR4 CTL_REG(0x0020)
-#define CR9 CTL_REG(0x0024)
-/* bit 2: antenna switch (together with CR10) */
-#define CR10 CTL_REG(0x0028)
-/* bit 1: antenna switch (together with CR9)
- * RF2959 controls with CR11 radion on and off
+#define ZD_CR9 CTL_REG(0x0024)
+/* bit 2: antenna switch (together with ZD_CR10) */
+#define ZD_CR10 CTL_REG(0x0028)
+/* bit 1: antenna switch (together with ZD_CR9)
+ * RF2959 controls with ZD_CR11 radion on and off
*/
-#define CR11 CTL_REG(0x002C)
+#define ZD_CR11 CTL_REG(0x002C)
/* bit 6: TX power control for OFDM
- * RF2959 controls with CR10 radio on and off
+ * RF2959 controls with ZD_CR10 radio on and off
*/
-#define CR12 CTL_REG(0x0030)
-#define CR13 CTL_REG(0x0034)
-#define CR14 CTL_REG(0x0038)
-#define CR15 CTL_REG(0x003C)
-#define CR16 CTL_REG(0x0040)
-#define CR17 CTL_REG(0x0044)
-#define CR18 CTL_REG(0x0048)
-#define CR19 CTL_REG(0x004C)
-#define CR20 CTL_REG(0x0050)
-#define CR21 CTL_REG(0x0054)
-#define CR22 CTL_REG(0x0058)
-#define CR23 CTL_REG(0x005C)
-#define CR24 CTL_REG(0x0060) /* CCA threshold */
-#define CR25 CTL_REG(0x0064)
-#define CR26 CTL_REG(0x0068)
-#define CR27 CTL_REG(0x006C)
-#define CR28 CTL_REG(0x0070)
-#define CR29 CTL_REG(0x0074)
-#define CR30 CTL_REG(0x0078)
-#define CR31 CTL_REG(0x007C) /* TX power control for RF in CCK mode */
-#define CR32 CTL_REG(0x0080)
-#define CR33 CTL_REG(0x0084)
-#define CR34 CTL_REG(0x0088)
-#define CR35 CTL_REG(0x008C)
-#define CR36 CTL_REG(0x0090)
-#define CR37 CTL_REG(0x0094)
-#define CR38 CTL_REG(0x0098)
-#define CR39 CTL_REG(0x009C)
-#define CR40 CTL_REG(0x00A0)
-#define CR41 CTL_REG(0x00A4)
-#define CR42 CTL_REG(0x00A8)
-#define CR43 CTL_REG(0x00AC)
-#define CR44 CTL_REG(0x00B0)
-#define CR45 CTL_REG(0x00B4)
-#define CR46 CTL_REG(0x00B8)
-#define CR47 CTL_REG(0x00BC) /* CCK baseband gain
- * (patch value might be in EEPROM)
- */
-#define CR48 CTL_REG(0x00C0)
-#define CR49 CTL_REG(0x00C4)
-#define CR50 CTL_REG(0x00C8)
-#define CR51 CTL_REG(0x00CC) /* TX power control for RF in 6-36M modes */
-#define CR52 CTL_REG(0x00D0) /* TX power control for RF in 48M mode */
-#define CR53 CTL_REG(0x00D4) /* TX power control for RF in 54M mode */
-#define CR54 CTL_REG(0x00D8)
-#define CR55 CTL_REG(0x00DC)
-#define CR56 CTL_REG(0x00E0)
-#define CR57 CTL_REG(0x00E4)
-#define CR58 CTL_REG(0x00E8)
-#define CR59 CTL_REG(0x00EC)
-#define CR60 CTL_REG(0x00F0)
-#define CR61 CTL_REG(0x00F4)
-#define CR62 CTL_REG(0x00F8)
-#define CR63 CTL_REG(0x00FC)
-#define CR64 CTL_REG(0x0100)
-#define CR65 CTL_REG(0x0104) /* OFDM 54M calibration */
-#define CR66 CTL_REG(0x0108) /* OFDM 48M calibration */
-#define CR67 CTL_REG(0x010C) /* OFDM 36M calibration */
-#define CR68 CTL_REG(0x0110) /* CCK calibration */
-#define CR69 CTL_REG(0x0114)
-#define CR70 CTL_REG(0x0118)
-#define CR71 CTL_REG(0x011C)
-#define CR72 CTL_REG(0x0120)
-#define CR73 CTL_REG(0x0124)
-#define CR74 CTL_REG(0x0128)
-#define CR75 CTL_REG(0x012C)
-#define CR76 CTL_REG(0x0130)
-#define CR77 CTL_REG(0x0134)
-#define CR78 CTL_REG(0x0138)
-#define CR79 CTL_REG(0x013C)
-#define CR80 CTL_REG(0x0140)
-#define CR81 CTL_REG(0x0144)
-#define CR82 CTL_REG(0x0148)
-#define CR83 CTL_REG(0x014C)
-#define CR84 CTL_REG(0x0150)
-#define CR85 CTL_REG(0x0154)
-#define CR86 CTL_REG(0x0158)
-#define CR87 CTL_REG(0x015C)
-#define CR88 CTL_REG(0x0160)
-#define CR89 CTL_REG(0x0164)
-#define CR90 CTL_REG(0x0168)
-#define CR91 CTL_REG(0x016C)
-#define CR92 CTL_REG(0x0170)
-#define CR93 CTL_REG(0x0174)
-#define CR94 CTL_REG(0x0178)
-#define CR95 CTL_REG(0x017C)
-#define CR96 CTL_REG(0x0180)
-#define CR97 CTL_REG(0x0184)
-#define CR98 CTL_REG(0x0188)
-#define CR99 CTL_REG(0x018C)
-#define CR100 CTL_REG(0x0190)
-#define CR101 CTL_REG(0x0194)
-#define CR102 CTL_REG(0x0198)
-#define CR103 CTL_REG(0x019C)
-#define CR104 CTL_REG(0x01A0)
-#define CR105 CTL_REG(0x01A4)
-#define CR106 CTL_REG(0x01A8)
-#define CR107 CTL_REG(0x01AC)
-#define CR108 CTL_REG(0x01B0)
-#define CR109 CTL_REG(0x01B4)
-#define CR110 CTL_REG(0x01B8)
-#define CR111 CTL_REG(0x01BC)
-#define CR112 CTL_REG(0x01C0)
-#define CR113 CTL_REG(0x01C4)
-#define CR114 CTL_REG(0x01C8)
-#define CR115 CTL_REG(0x01CC)
-#define CR116 CTL_REG(0x01D0)
-#define CR117 CTL_REG(0x01D4)
-#define CR118 CTL_REG(0x01D8)
-#define CR119 CTL_REG(0x01DC)
-#define CR120 CTL_REG(0x01E0)
-#define CR121 CTL_REG(0x01E4)
-#define CR122 CTL_REG(0x01E8)
-#define CR123 CTL_REG(0x01EC)
-#define CR124 CTL_REG(0x01F0)
-#define CR125 CTL_REG(0x01F4)
-#define CR126 CTL_REG(0x01F8)
-#define CR127 CTL_REG(0x01FC)
-#define CR128 CTL_REG(0x0200)
-#define CR129 CTL_REG(0x0204)
-#define CR130 CTL_REG(0x0208)
-#define CR131 CTL_REG(0x020C)
-#define CR132 CTL_REG(0x0210)
-#define CR133 CTL_REG(0x0214)
-#define CR134 CTL_REG(0x0218)
-#define CR135 CTL_REG(0x021C)
-#define CR136 CTL_REG(0x0220)
-#define CR137 CTL_REG(0x0224)
-#define CR138 CTL_REG(0x0228)
-#define CR139 CTL_REG(0x022C)
-#define CR140 CTL_REG(0x0230)
-#define CR141 CTL_REG(0x0234)
-#define CR142 CTL_REG(0x0238)
-#define CR143 CTL_REG(0x023C)
-#define CR144 CTL_REG(0x0240)
-#define CR145 CTL_REG(0x0244)
-#define CR146 CTL_REG(0x0248)
-#define CR147 CTL_REG(0x024C)
-#define CR148 CTL_REG(0x0250)
-#define CR149 CTL_REG(0x0254)
-#define CR150 CTL_REG(0x0258)
-#define CR151 CTL_REG(0x025C)
-#define CR152 CTL_REG(0x0260)
-#define CR153 CTL_REG(0x0264)
-#define CR154 CTL_REG(0x0268)
-#define CR155 CTL_REG(0x026C)
-#define CR156 CTL_REG(0x0270)
-#define CR157 CTL_REG(0x0274)
-#define CR158 CTL_REG(0x0278)
-#define CR159 CTL_REG(0x027C)
-#define CR160 CTL_REG(0x0280)
-#define CR161 CTL_REG(0x0284)
-#define CR162 CTL_REG(0x0288)
-#define CR163 CTL_REG(0x028C)
-#define CR164 CTL_REG(0x0290)
-#define CR165 CTL_REG(0x0294)
-#define CR166 CTL_REG(0x0298)
-#define CR167 CTL_REG(0x029C)
-#define CR168 CTL_REG(0x02A0)
-#define CR169 CTL_REG(0x02A4)
-#define CR170 CTL_REG(0x02A8)
-#define CR171 CTL_REG(0x02AC)
-#define CR172 CTL_REG(0x02B0)
-#define CR173 CTL_REG(0x02B4)
-#define CR174 CTL_REG(0x02B8)
-#define CR175 CTL_REG(0x02BC)
-#define CR176 CTL_REG(0x02C0)
-#define CR177 CTL_REG(0x02C4)
-#define CR178 CTL_REG(0x02C8)
-#define CR179 CTL_REG(0x02CC)
-#define CR180 CTL_REG(0x02D0)
-#define CR181 CTL_REG(0x02D4)
-#define CR182 CTL_REG(0x02D8)
-#define CR183 CTL_REG(0x02DC)
-#define CR184 CTL_REG(0x02E0)
-#define CR185 CTL_REG(0x02E4)
-#define CR186 CTL_REG(0x02E8)
-#define CR187 CTL_REG(0x02EC)
-#define CR188 CTL_REG(0x02F0)
-#define CR189 CTL_REG(0x02F4)
-#define CR190 CTL_REG(0x02F8)
-#define CR191 CTL_REG(0x02FC)
-#define CR192 CTL_REG(0x0300)
-#define CR193 CTL_REG(0x0304)
-#define CR194 CTL_REG(0x0308)
-#define CR195 CTL_REG(0x030C)
-#define CR196 CTL_REG(0x0310)
-#define CR197 CTL_REG(0x0314)
-#define CR198 CTL_REG(0x0318)
-#define CR199 CTL_REG(0x031C)
-#define CR200 CTL_REG(0x0320)
-#define CR201 CTL_REG(0x0324)
-#define CR202 CTL_REG(0x0328)
-#define CR203 CTL_REG(0x032C) /* I2C bus template value & flash control */
-#define CR204 CTL_REG(0x0330)
-#define CR205 CTL_REG(0x0334)
-#define CR206 CTL_REG(0x0338)
-#define CR207 CTL_REG(0x033C)
-#define CR208 CTL_REG(0x0340)
-#define CR209 CTL_REG(0x0344)
-#define CR210 CTL_REG(0x0348)
-#define CR211 CTL_REG(0x034C)
-#define CR212 CTL_REG(0x0350)
-#define CR213 CTL_REG(0x0354)
-#define CR214 CTL_REG(0x0358)
-#define CR215 CTL_REG(0x035C)
-#define CR216 CTL_REG(0x0360)
-#define CR217 CTL_REG(0x0364)
-#define CR218 CTL_REG(0x0368)
-#define CR219 CTL_REG(0x036C)
-#define CR220 CTL_REG(0x0370)
-#define CR221 CTL_REG(0x0374)
-#define CR222 CTL_REG(0x0378)
-#define CR223 CTL_REG(0x037C)
-#define CR224 CTL_REG(0x0380)
-#define CR225 CTL_REG(0x0384)
-#define CR226 CTL_REG(0x0388)
-#define CR227 CTL_REG(0x038C)
-#define CR228 CTL_REG(0x0390)
-#define CR229 CTL_REG(0x0394)
-#define CR230 CTL_REG(0x0398)
-#define CR231 CTL_REG(0x039C)
-#define CR232 CTL_REG(0x03A0)
-#define CR233 CTL_REG(0x03A4)
-#define CR234 CTL_REG(0x03A8)
-#define CR235 CTL_REG(0x03AC)
-#define CR236 CTL_REG(0x03B0)
+#define ZD_CR12 CTL_REG(0x0030)
+#define ZD_CR13 CTL_REG(0x0034)
+#define ZD_CR14 CTL_REG(0x0038)
+#define ZD_CR15 CTL_REG(0x003C)
+#define ZD_CR16 CTL_REG(0x0040)
+#define ZD_CR17 CTL_REG(0x0044)
+#define ZD_CR18 CTL_REG(0x0048)
+#define ZD_CR19 CTL_REG(0x004C)
+#define ZD_CR20 CTL_REG(0x0050)
+#define ZD_CR21 CTL_REG(0x0054)
+#define ZD_CR22 CTL_REG(0x0058)
+#define ZD_CR23 CTL_REG(0x005C)
+#define ZD_CR24 CTL_REG(0x0060) /* CCA threshold */
+#define ZD_CR25 CTL_REG(0x0064)
+#define ZD_CR26 CTL_REG(0x0068)
+#define ZD_CR27 CTL_REG(0x006C)
+#define ZD_CR28 CTL_REG(0x0070)
+#define ZD_CR29 CTL_REG(0x0074)
+#define ZD_CR30 CTL_REG(0x0078)
+#define ZD_CR31 CTL_REG(0x007C) /* TX power control for RF in
+ * CCK mode
+ */
+#define ZD_CR32 CTL_REG(0x0080)
+#define ZD_CR33 CTL_REG(0x0084)
+#define ZD_CR34 CTL_REG(0x0088)
+#define ZD_CR35 CTL_REG(0x008C)
+#define ZD_CR36 CTL_REG(0x0090)
+#define ZD_CR37 CTL_REG(0x0094)
+#define ZD_CR38 CTL_REG(0x0098)
+#define ZD_CR39 CTL_REG(0x009C)
+#define ZD_CR40 CTL_REG(0x00A0)
+#define ZD_CR41 CTL_REG(0x00A4)
+#define ZD_CR42 CTL_REG(0x00A8)
+#define ZD_CR43 CTL_REG(0x00AC)
+#define ZD_CR44 CTL_REG(0x00B0)
+#define ZD_CR45 CTL_REG(0x00B4)
+#define ZD_CR46 CTL_REG(0x00B8)
+#define ZD_CR47 CTL_REG(0x00BC) /* CCK baseband gain
+ * (patch value might be in EEPROM)
+ */
+#define ZD_CR48 CTL_REG(0x00C0)
+#define ZD_CR49 CTL_REG(0x00C4)
+#define ZD_CR50 CTL_REG(0x00C8)
+#define ZD_CR51 CTL_REG(0x00CC) /* TX power control for RF in
+ * 6-36M modes
+ */
+#define ZD_CR52 CTL_REG(0x00D0) /* TX power control for RF in
+ * 48M mode
+ */
+#define ZD_CR53 CTL_REG(0x00D4) /* TX power control for RF in
+ * 54M mode
+ */
+#define ZD_CR54 CTL_REG(0x00D8)
+#define ZD_CR55 CTL_REG(0x00DC)
+#define ZD_CR56 CTL_REG(0x00E0)
+#define ZD_CR57 CTL_REG(0x00E4)
+#define ZD_CR58 CTL_REG(0x00E8)
+#define ZD_CR59 CTL_REG(0x00EC)
+#define ZD_CR60 CTL_REG(0x00F0)
+#define ZD_CR61 CTL_REG(0x00F4)
+#define ZD_CR62 CTL_REG(0x00F8)
+#define ZD_CR63 CTL_REG(0x00FC)
+#define ZD_CR64 CTL_REG(0x0100)
+#define ZD_CR65 CTL_REG(0x0104) /* OFDM 54M calibration */
+#define ZD_CR66 CTL_REG(0x0108) /* OFDM 48M calibration */
+#define ZD_CR67 CTL_REG(0x010C) /* OFDM 36M calibration */
+#define ZD_CR68 CTL_REG(0x0110) /* CCK calibration */
+#define ZD_CR69 CTL_REG(0x0114)
+#define ZD_CR70 CTL_REG(0x0118)
+#define ZD_CR71 CTL_REG(0x011C)
+#define ZD_CR72 CTL_REG(0x0120)
+#define ZD_CR73 CTL_REG(0x0124)
+#define ZD_CR74 CTL_REG(0x0128)
+#define ZD_CR75 CTL_REG(0x012C)
+#define ZD_CR76 CTL_REG(0x0130)
+#define ZD_CR77 CTL_REG(0x0134)
+#define ZD_CR78 CTL_REG(0x0138)
+#define ZD_CR79 CTL_REG(0x013C)
+#define ZD_CR80 CTL_REG(0x0140)
+#define ZD_CR81 CTL_REG(0x0144)
+#define ZD_CR82 CTL_REG(0x0148)
+#define ZD_CR83 CTL_REG(0x014C)
+#define ZD_CR84 CTL_REG(0x0150)
+#define ZD_CR85 CTL_REG(0x0154)
+#define ZD_CR86 CTL_REG(0x0158)
+#define ZD_CR87 CTL_REG(0x015C)
+#define ZD_CR88 CTL_REG(0x0160)
+#define ZD_CR89 CTL_REG(0x0164)
+#define ZD_CR90 CTL_REG(0x0168)
+#define ZD_CR91 CTL_REG(0x016C)
+#define ZD_CR92 CTL_REG(0x0170)
+#define ZD_CR93 CTL_REG(0x0174)
+#define ZD_CR94 CTL_REG(0x0178)
+#define ZD_CR95 CTL_REG(0x017C)
+#define ZD_CR96 CTL_REG(0x0180)
+#define ZD_CR97 CTL_REG(0x0184)
+#define ZD_CR98 CTL_REG(0x0188)
+#define ZD_CR99 CTL_REG(0x018C)
+#define ZD_CR100 CTL_REG(0x0190)
+#define ZD_CR101 CTL_REG(0x0194)
+#define ZD_CR102 CTL_REG(0x0198)
+#define ZD_CR103 CTL_REG(0x019C)
+#define ZD_CR104 CTL_REG(0x01A0)
+#define ZD_CR105 CTL_REG(0x01A4)
+#define ZD_CR106 CTL_REG(0x01A8)
+#define ZD_CR107 CTL_REG(0x01AC)
+#define ZD_CR108 CTL_REG(0x01B0)
+#define ZD_CR109 CTL_REG(0x01B4)
+#define ZD_CR110 CTL_REG(0x01B8)
+#define ZD_CR111 CTL_REG(0x01BC)
+#define ZD_CR112 CTL_REG(0x01C0)
+#define ZD_CR113 CTL_REG(0x01C4)
+#define ZD_CR114 CTL_REG(0x01C8)
+#define ZD_CR115 CTL_REG(0x01CC)
+#define ZD_CR116 CTL_REG(0x01D0)
+#define ZD_CR117 CTL_REG(0x01D4)
+#define ZD_CR118 CTL_REG(0x01D8)
+#define ZD_CR119 CTL_REG(0x01DC)
+#define ZD_CR120 CTL_REG(0x01E0)
+#define ZD_CR121 CTL_REG(0x01E4)
+#define ZD_CR122 CTL_REG(0x01E8)
+#define ZD_CR123 CTL_REG(0x01EC)
+#define ZD_CR124 CTL_REG(0x01F0)
+#define ZD_CR125 CTL_REG(0x01F4)
+#define ZD_CR126 CTL_REG(0x01F8)
+#define ZD_CR127 CTL_REG(0x01FC)
+#define ZD_CR128 CTL_REG(0x0200)
+#define ZD_CR129 CTL_REG(0x0204)
+#define ZD_CR130 CTL_REG(0x0208)
+#define ZD_CR131 CTL_REG(0x020C)
+#define ZD_CR132 CTL_REG(0x0210)
+#define ZD_CR133 CTL_REG(0x0214)
+#define ZD_CR134 CTL_REG(0x0218)
+#define ZD_CR135 CTL_REG(0x021C)
+#define ZD_CR136 CTL_REG(0x0220)
+#define ZD_CR137 CTL_REG(0x0224)
+#define ZD_CR138 CTL_REG(0x0228)
+#define ZD_CR139 CTL_REG(0x022C)
+#define ZD_CR140 CTL_REG(0x0230)
+#define ZD_CR141 CTL_REG(0x0234)
+#define ZD_CR142 CTL_REG(0x0238)
+#define ZD_CR143 CTL_REG(0x023C)
+#define ZD_CR144 CTL_REG(0x0240)
+#define ZD_CR145 CTL_REG(0x0244)
+#define ZD_CR146 CTL_REG(0x0248)
+#define ZD_CR147 CTL_REG(0x024C)
+#define ZD_CR148 CTL_REG(0x0250)
+#define ZD_CR149 CTL_REG(0x0254)
+#define ZD_CR150 CTL_REG(0x0258)
+#define ZD_CR151 CTL_REG(0x025C)
+#define ZD_CR152 CTL_REG(0x0260)
+#define ZD_CR153 CTL_REG(0x0264)
+#define ZD_CR154 CTL_REG(0x0268)
+#define ZD_CR155 CTL_REG(0x026C)
+#define ZD_CR156 CTL_REG(0x0270)
+#define ZD_CR157 CTL_REG(0x0274)
+#define ZD_CR158 CTL_REG(0x0278)
+#define ZD_CR159 CTL_REG(0x027C)
+#define ZD_CR160 CTL_REG(0x0280)
+#define ZD_CR161 CTL_REG(0x0284)
+#define ZD_CR162 CTL_REG(0x0288)
+#define ZD_CR163 CTL_REG(0x028C)
+#define ZD_CR164 CTL_REG(0x0290)
+#define ZD_CR165 CTL_REG(0x0294)
+#define ZD_CR166 CTL_REG(0x0298)
+#define ZD_CR167 CTL_REG(0x029C)
+#define ZD_CR168 CTL_REG(0x02A0)
+#define ZD_CR169 CTL_REG(0x02A4)
+#define ZD_CR170 CTL_REG(0x02A8)
+#define ZD_CR171 CTL_REG(0x02AC)
+#define ZD_CR172 CTL_REG(0x02B0)
+#define ZD_CR173 CTL_REG(0x02B4)
+#define ZD_CR174 CTL_REG(0x02B8)
+#define ZD_CR175 CTL_REG(0x02BC)
+#define ZD_CR176 CTL_REG(0x02C0)
+#define ZD_CR177 CTL_REG(0x02C4)
+#define ZD_CR178 CTL_REG(0x02C8)
+#define ZD_CR179 CTL_REG(0x02CC)
+#define ZD_CR180 CTL_REG(0x02D0)
+#define ZD_CR181 CTL_REG(0x02D4)
+#define ZD_CR182 CTL_REG(0x02D8)
+#define ZD_CR183 CTL_REG(0x02DC)
+#define ZD_CR184 CTL_REG(0x02E0)
+#define ZD_CR185 CTL_REG(0x02E4)
+#define ZD_CR186 CTL_REG(0x02E8)
+#define ZD_CR187 CTL_REG(0x02EC)
+#define ZD_CR188 CTL_REG(0x02F0)
+#define ZD_CR189 CTL_REG(0x02F4)
+#define ZD_CR190 CTL_REG(0x02F8)
+#define ZD_CR191 CTL_REG(0x02FC)
+#define ZD_CR192 CTL_REG(0x0300)
+#define ZD_CR193 CTL_REG(0x0304)
+#define ZD_CR194 CTL_REG(0x0308)
+#define ZD_CR195 CTL_REG(0x030C)
+#define ZD_CR196 CTL_REG(0x0310)
+#define ZD_CR197 CTL_REG(0x0314)
+#define ZD_CR198 CTL_REG(0x0318)
+#define ZD_CR199 CTL_REG(0x031C)
+#define ZD_CR200 CTL_REG(0x0320)
+#define ZD_CR201 CTL_REG(0x0324)
+#define ZD_CR202 CTL_REG(0x0328)
+#define ZD_CR203 CTL_REG(0x032C) /* I2C bus template value & flash
+ * control
+ */
+#define ZD_CR204 CTL_REG(0x0330)
+#define ZD_CR205 CTL_REG(0x0334)
+#define ZD_CR206 CTL_REG(0x0338)
+#define ZD_CR207 CTL_REG(0x033C)
+#define ZD_CR208 CTL_REG(0x0340)
+#define ZD_CR209 CTL_REG(0x0344)
+#define ZD_CR210 CTL_REG(0x0348)
+#define ZD_CR211 CTL_REG(0x034C)
+#define ZD_CR212 CTL_REG(0x0350)
+#define ZD_CR213 CTL_REG(0x0354)
+#define ZD_CR214 CTL_REG(0x0358)
+#define ZD_CR215 CTL_REG(0x035C)
+#define ZD_CR216 CTL_REG(0x0360)
+#define ZD_CR217 CTL_REG(0x0364)
+#define ZD_CR218 CTL_REG(0x0368)
+#define ZD_CR219 CTL_REG(0x036C)
+#define ZD_CR220 CTL_REG(0x0370)
+#define ZD_CR221 CTL_REG(0x0374)
+#define ZD_CR222 CTL_REG(0x0378)
+#define ZD_CR223 CTL_REG(0x037C)
+#define ZD_CR224 CTL_REG(0x0380)
+#define ZD_CR225 CTL_REG(0x0384)
+#define ZD_CR226 CTL_REG(0x0388)
+#define ZD_CR227 CTL_REG(0x038C)
+#define ZD_CR228 CTL_REG(0x0390)
+#define ZD_CR229 CTL_REG(0x0394)
+#define ZD_CR230 CTL_REG(0x0398)
+#define ZD_CR231 CTL_REG(0x039C)
+#define ZD_CR232 CTL_REG(0x03A0)
+#define ZD_CR233 CTL_REG(0x03A4)
+#define ZD_CR234 CTL_REG(0x03A8)
+#define ZD_CR235 CTL_REG(0x03AC)
+#define ZD_CR236 CTL_REG(0x03B0)
-#define CR240 CTL_REG(0x03C0)
-/* bit 7: host-controlled RF register writes
- * CR241-CR245: for hardware controlled writing of RF bits, not needed for
- * USB
+#define ZD_CR240 CTL_REG(0x03C0)
+/* bit 7: host-controlled RF register writes
+ * ZD_CR241-ZD_CR245: for hardware controlled writing of RF bits, not needed for
+ * USB
*/
-#define CR241 CTL_REG(0x03C4)
-#define CR242 CTL_REG(0x03C8)
-#define CR243 CTL_REG(0x03CC)
-#define CR244 CTL_REG(0x03D0)
-#define CR245 CTL_REG(0x03D4)
+#define ZD_CR241 CTL_REG(0x03C4)
+#define ZD_CR242 CTL_REG(0x03C8)
+#define ZD_CR243 CTL_REG(0x03CC)
+#define ZD_CR244 CTL_REG(0x03D0)
+#define ZD_CR245 CTL_REG(0x03D4)
-#define CR251 CTL_REG(0x03EC) /* only used for activation and deactivation of
- * Airoha RFs AL2230 and AL7230B
- */
-#define CR252 CTL_REG(0x03F0)
-#define CR253 CTL_REG(0x03F4)
-#define CR254 CTL_REG(0x03F8)
-#define CR255 CTL_REG(0x03FC)
+#define ZD_CR251 CTL_REG(0x03EC) /* only used for activation and
+ * deactivation of Airoha RFs AL2230
+ * and AL7230B
+ */
+#define ZD_CR252 CTL_REG(0x03F0)
+#define ZD_CR253 CTL_REG(0x03F4)
+#define ZD_CR254 CTL_REG(0x03F8)
+#define ZD_CR255 CTL_REG(0x03FC)
#define CR_MAX_PHY_REG 255
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h
index 79dc103..725b7c9 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.h
+++ b/drivers/net/wireless/zd1211rw/zd_rf.h
@@ -55,7 +55,7 @@
* defaults to 1 (yes) */
u8 update_channel_int:1;
- /* whether CR47 should be patched from the EEPROM, if the appropriate
+ /* whether ZD_CR47 should be patched from the EEPROM, if the appropriate
* flag is set in the POD. The vendor driver suggests that this should
* be done for all RF's, but a bug in their code prevents but their
* HW_OverWritePhyRegFromE2P() routine from ever taking effect. */
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
index 74a8f7a..12babcb 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
@@ -61,31 +61,31 @@
};
static const struct zd_ioreq16 zd1211b_ioreqs_shared_1[] = {
- { CR240, 0x57 }, { CR9, 0xe0 },
+ { ZD_CR240, 0x57 }, { ZD_CR9, 0xe0 },
};
static const struct zd_ioreq16 ioreqs_init_al2230s[] = {
- { CR47, 0x1e }, /* MARK_002 */
- { CR106, 0x22 },
- { CR107, 0x2a }, /* MARK_002 */
- { CR109, 0x13 }, /* MARK_002 */
- { CR118, 0xf8 }, /* MARK_002 */
- { CR119, 0x12 }, { CR122, 0xe0 },
- { CR128, 0x10 }, /* MARK_001 from 0xe->0x10 */
- { CR129, 0x0e }, /* MARK_001 from 0xd->0x0e */
- { CR130, 0x10 }, /* MARK_001 from 0xb->0x0d */
+ { ZD_CR47, 0x1e }, /* MARK_002 */
+ { ZD_CR106, 0x22 },
+ { ZD_CR107, 0x2a }, /* MARK_002 */
+ { ZD_CR109, 0x13 }, /* MARK_002 */
+ { ZD_CR118, 0xf8 }, /* MARK_002 */
+ { ZD_CR119, 0x12 }, { ZD_CR122, 0xe0 },
+ { ZD_CR128, 0x10 }, /* MARK_001 from 0xe->0x10 */
+ { ZD_CR129, 0x0e }, /* MARK_001 from 0xd->0x0e */
+ { ZD_CR130, 0x10 }, /* MARK_001 from 0xb->0x0d */
};
static int zd1211b_al2230_finalize_rf(struct zd_chip *chip)
{
int r;
static const struct zd_ioreq16 ioreqs[] = {
- { CR80, 0x30 }, { CR81, 0x30 }, { CR79, 0x58 },
- { CR12, 0xf0 }, { CR77, 0x1b }, { CR78, 0x58 },
- { CR203, 0x06 },
+ { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, { ZD_CR79, 0x58 },
+ { ZD_CR12, 0xf0 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x58 },
+ { ZD_CR203, 0x06 },
{ },
- { CR240, 0x80 },
+ { ZD_CR240, 0x80 },
};
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -94,12 +94,12 @@
/* related to antenna selection? */
if (chip->new_phy_layout) {
- r = zd_iowrite16_locked(chip, 0xe1, CR9);
+ r = zd_iowrite16_locked(chip, 0xe1, ZD_CR9);
if (r)
return r;
}
- return zd_iowrite16_locked(chip, 0x06, CR203);
+ return zd_iowrite16_locked(chip, 0x06, ZD_CR203);
}
static int zd1211_al2230_init_hw(struct zd_rf *rf)
@@ -108,40 +108,40 @@
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs_init[] = {
- { CR15, 0x20 }, { CR23, 0x40 }, { CR24, 0x20 },
- { CR26, 0x11 }, { CR28, 0x3e }, { CR29, 0x00 },
- { CR44, 0x33 }, { CR106, 0x2a }, { CR107, 0x1a },
- { CR109, 0x09 }, { CR110, 0x27 }, { CR111, 0x2b },
- { CR112, 0x2b }, { CR119, 0x0a }, { CR10, 0x89 },
+ { ZD_CR15, 0x20 }, { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 },
+ { ZD_CR26, 0x11 }, { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 },
+ { ZD_CR44, 0x33 }, { ZD_CR106, 0x2a }, { ZD_CR107, 0x1a },
+ { ZD_CR109, 0x09 }, { ZD_CR110, 0x27 }, { ZD_CR111, 0x2b },
+ { ZD_CR112, 0x2b }, { ZD_CR119, 0x0a }, { ZD_CR10, 0x89 },
/* for newest (3rd cut) AL2300 */
- { CR17, 0x28 },
- { CR26, 0x93 }, { CR34, 0x30 },
+ { ZD_CR17, 0x28 },
+ { ZD_CR26, 0x93 }, { ZD_CR34, 0x30 },
/* for newest (3rd cut) AL2300 */
- { CR35, 0x3e },
- { CR41, 0x24 }, { CR44, 0x32 },
+ { ZD_CR35, 0x3e },
+ { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 },
/* for newest (3rd cut) AL2300 */
- { CR46, 0x96 },
- { CR47, 0x1e }, { CR79, 0x58 }, { CR80, 0x30 },
- { CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 },
- { CR92, 0x0a }, { CR99, 0x28 }, { CR100, 0x00 },
- { CR101, 0x13 }, { CR102, 0x27 }, { CR106, 0x24 },
- { CR107, 0x2a }, { CR109, 0x09 }, { CR110, 0x13 },
- { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 },
- { CR114, 0x27 },
+ { ZD_CR46, 0x96 },
+ { ZD_CR47, 0x1e }, { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 },
+ { ZD_CR81, 0x30 }, { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 },
+ { ZD_CR92, 0x0a }, { ZD_CR99, 0x28 }, { ZD_CR100, 0x00 },
+ { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 }, { ZD_CR106, 0x24 },
+ { ZD_CR107, 0x2a }, { ZD_CR109, 0x09 }, { ZD_CR110, 0x13 },
+ { ZD_CR111, 0x1f }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 },
+ { ZD_CR114, 0x27 },
/* for newest (3rd cut) AL2300 */
- { CR115, 0x24 },
- { CR116, 0x24 }, { CR117, 0xf4 }, { CR118, 0xfc },
- { CR119, 0x10 }, { CR120, 0x4f }, { CR121, 0x77 },
- { CR122, 0xe0 }, { CR137, 0x88 }, { CR252, 0xff },
- { CR253, 0xff },
+ { ZD_CR115, 0x24 },
+ { ZD_CR116, 0x24 }, { ZD_CR117, 0xf4 }, { ZD_CR118, 0xfc },
+ { ZD_CR119, 0x10 }, { ZD_CR120, 0x4f }, { ZD_CR121, 0x77 },
+ { ZD_CR122, 0xe0 }, { ZD_CR137, 0x88 }, { ZD_CR252, 0xff },
+ { ZD_CR253, 0xff },
};
static const struct zd_ioreq16 ioreqs_pll[] = {
/* shdnb(PLL_ON)=0 */
- { CR251, 0x2f },
+ { ZD_CR251, 0x2f },
/* shdnb(PLL_ON)=1 */
- { CR251, 0x3f },
- { CR138, 0x28 }, { CR203, 0x06 },
+ { ZD_CR251, 0x3f },
+ { ZD_CR138, 0x28 }, { ZD_CR203, 0x06 },
};
static const u32 rv1[] = {
@@ -161,7 +161,7 @@
0x0805b6,
0x011687,
0x000688,
- 0x0403b9, /* external control TX power (CR31) */
+ 0x0403b9, /* external control TX power (ZD_CR31) */
0x00dbba,
0x00099b,
0x0bdffc,
@@ -221,52 +221,54 @@
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs1[] = {
- { CR10, 0x89 }, { CR15, 0x20 },
- { CR17, 0x2B }, /* for newest(3rd cut) AL2230 */
- { CR23, 0x40 }, { CR24, 0x20 }, { CR26, 0x93 },
- { CR28, 0x3e }, { CR29, 0x00 },
- { CR33, 0x28 }, /* 5621 */
- { CR34, 0x30 },
- { CR35, 0x3e }, /* for newest(3rd cut) AL2230 */
- { CR41, 0x24 }, { CR44, 0x32 },
- { CR46, 0x99 }, /* for newest(3rd cut) AL2230 */
- { CR47, 0x1e },
+ { ZD_CR10, 0x89 }, { ZD_CR15, 0x20 },
+ { ZD_CR17, 0x2B }, /* for newest(3rd cut) AL2230 */
+ { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 }, { ZD_CR26, 0x93 },
+ { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 },
+ { ZD_CR33, 0x28 }, /* 5621 */
+ { ZD_CR34, 0x30 },
+ { ZD_CR35, 0x3e }, /* for newest(3rd cut) AL2230 */
+ { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 },
+ { ZD_CR46, 0x99 }, /* for newest(3rd cut) AL2230 */
+ { ZD_CR47, 0x1e },
/* ZD1211B 05.06.10 */
- { CR48, 0x06 }, { CR49, 0xf9 }, { CR51, 0x01 },
- { CR52, 0x80 }, { CR53, 0x7e }, { CR65, 0x00 },
- { CR66, 0x00 }, { CR67, 0x00 }, { CR68, 0x00 },
- { CR69, 0x28 },
+ { ZD_CR48, 0x06 }, { ZD_CR49, 0xf9 }, { ZD_CR51, 0x01 },
+ { ZD_CR52, 0x80 }, { ZD_CR53, 0x7e }, { ZD_CR65, 0x00 },
+ { ZD_CR66, 0x00 }, { ZD_CR67, 0x00 }, { ZD_CR68, 0x00 },
+ { ZD_CR69, 0x28 },
- { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
- { CR87, 0x0a }, { CR89, 0x04 },
- { CR91, 0x00 }, /* 5621 */
- { CR92, 0x0a },
- { CR98, 0x8d }, /* 4804, for 1212 new algorithm */
- { CR99, 0x00 }, /* 5621 */
- { CR101, 0x13 }, { CR102, 0x27 },
- { CR106, 0x24 }, /* for newest(3rd cut) AL2230 */
- { CR107, 0x2a },
- { CR109, 0x13 }, /* 4804, for 1212 new algorithm */
- { CR110, 0x1f }, /* 4804, for 1212 new algorithm */
- { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 },
- { CR114, 0x27 },
- { CR115, 0x26 }, /* 24->26 at 4902 for newest(3rd cut) AL2230 */
- { CR116, 0x24 },
- { CR117, 0xfa }, /* for 1211b */
- { CR118, 0xfa }, /* for 1211b */
- { CR119, 0x10 },
- { CR120, 0x4f },
- { CR121, 0x6c }, /* for 1211b */
- { CR122, 0xfc }, /* E0->FC at 4902 */
- { CR123, 0x57 }, /* 5623 */
- { CR125, 0xad }, /* 4804, for 1212 new algorithm */
- { CR126, 0x6c }, /* 5614 */
- { CR127, 0x03 }, /* 4804, for 1212 new algorithm */
- { CR137, 0x50 }, /* 5614 */
- { CR138, 0xa8 },
- { CR144, 0xac }, /* 5621 */
- { CR150, 0x0d }, { CR252, 0x34 }, { CR253, 0x34 },
+ { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 },
+ { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 },
+ { ZD_CR91, 0x00 }, /* 5621 */
+ { ZD_CR92, 0x0a },
+ { ZD_CR98, 0x8d }, /* 4804, for 1212 new algorithm */
+ { ZD_CR99, 0x00 }, /* 5621 */
+ { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 },
+ { ZD_CR106, 0x24 }, /* for newest(3rd cut) AL2230 */
+ { ZD_CR107, 0x2a },
+ { ZD_CR109, 0x13 }, /* 4804, for 1212 new algorithm */
+ { ZD_CR110, 0x1f }, /* 4804, for 1212 new algorithm */
+ { ZD_CR111, 0x1f }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 },
+ { ZD_CR114, 0x27 },
+ { ZD_CR115, 0x26 }, /* 24->26 at 4902 for newest(3rd cut)
+ * AL2230
+ */
+ { ZD_CR116, 0x24 },
+ { ZD_CR117, 0xfa }, /* for 1211b */
+ { ZD_CR118, 0xfa }, /* for 1211b */
+ { ZD_CR119, 0x10 },
+ { ZD_CR120, 0x4f },
+ { ZD_CR121, 0x6c }, /* for 1211b */
+ { ZD_CR122, 0xfc }, /* E0->FC at 4902 */
+ { ZD_CR123, 0x57 }, /* 5623 */
+ { ZD_CR125, 0xad }, /* 4804, for 1212 new algorithm */
+ { ZD_CR126, 0x6c }, /* 5614 */
+ { ZD_CR127, 0x03 }, /* 4804, for 1212 new algorithm */
+ { ZD_CR137, 0x50 }, /* 5614 */
+ { ZD_CR138, 0xa8 },
+ { ZD_CR144, 0xac }, /* 5621 */
+ { ZD_CR150, 0x0d }, { ZD_CR252, 0x34 }, { ZD_CR253, 0x34 },
};
static const u32 rv1[] = {
@@ -284,7 +286,7 @@
0x6da010, /* Reg6 update for MP versio */
0xe36280, /* Modified by jxiao for Bor-Chin on 2004/08/02 */
0x116000,
- 0x9dc020, /* External control TX power (CR31) */
+ 0x9dc020, /* External control TX power (ZD_CR31) */
0x5ddb00, /* RegA update for MP version */
0xd99000, /* RegB update for MP version */
0x3ffbd0, /* RegC update for MP version */
@@ -295,8 +297,8 @@
};
static const struct zd_ioreq16 ioreqs2[] = {
- { CR251, 0x2f }, /* shdnb(PLL_ON)=0 */
- { CR251, 0x7f }, /* shdnb(PLL_ON)=1 */
+ { ZD_CR251, 0x2f }, /* shdnb(PLL_ON)=0 */
+ { ZD_CR251, 0x7f }, /* shdnb(PLL_ON)=1 */
};
static const u32 rv3[] = {
@@ -308,7 +310,7 @@
static const struct zd_ioreq16 ioreqs3[] = {
/* related to 6M band edge patching, happens unconditionally */
- { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 },
};
r = zd_iowrite16a_locked(chip, zd1211b_ioreqs_shared_1,
@@ -361,8 +363,8 @@
const u32 *rv = zd1211_al2230_table[channel-1];
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR138, 0x28 },
- { CR203, 0x06 },
+ { ZD_CR138, 0x28 },
+ { ZD_CR203, 0x06 },
};
r = zd_rfwritev_locked(chip, rv, 3, RF_RV_BITS);
@@ -393,8 +395,8 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x00 },
- { CR251, 0x3f },
+ { ZD_CR11, 0x00 },
+ { ZD_CR251, 0x3f },
};
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -404,8 +406,8 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x00 },
- { CR251, 0x7f },
+ { ZD_CR11, 0x00 },
+ { ZD_CR251, 0x7f },
};
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -415,8 +417,8 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x04 },
- { CR251, 0x2f },
+ { ZD_CR11, 0x04 },
+ { ZD_CR251, 0x2f },
};
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c b/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
index 65095d6..385c670 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
@@ -68,19 +68,19 @@
};
static const struct zd_ioreq16 ioreqs_sw[] = {
- { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
- { CR38, 0x38 }, { CR136, 0xdf },
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 },
+ { ZD_CR38, 0x38 }, { ZD_CR136, 0xdf },
};
static int zd1211b_al7230b_finalize(struct zd_chip *chip)
{
int r;
static const struct zd_ioreq16 ioreqs[] = {
- { CR80, 0x30 }, { CR81, 0x30 }, { CR79, 0x58 },
- { CR12, 0xf0 }, { CR77, 0x1b }, { CR78, 0x58 },
- { CR203, 0x04 },
+ { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, { ZD_CR79, 0x58 },
+ { ZD_CR12, 0xf0 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x58 },
+ { ZD_CR203, 0x04 },
{ },
- { CR240, 0x80 },
+ { ZD_CR240, 0x80 },
};
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -89,12 +89,12 @@
if (chip->new_phy_layout) {
/* antenna selection? */
- r = zd_iowrite16_locked(chip, 0xe5, CR9);
+ r = zd_iowrite16_locked(chip, 0xe5, ZD_CR9);
if (r)
return r;
}
- return zd_iowrite16_locked(chip, 0x04, CR203);
+ return zd_iowrite16_locked(chip, 0x04, ZD_CR203);
}
static int zd1211_al7230b_init_hw(struct zd_rf *rf)
@@ -106,66 +106,66 @@
* specified */
static const struct zd_ioreq16 ioreqs_1[] = {
/* This one is 7230-specific, and happens before the rest */
- { CR240, 0x57 },
+ { ZD_CR240, 0x57 },
{ },
- { CR15, 0x20 }, { CR23, 0x40 }, { CR24, 0x20 },
- { CR26, 0x11 }, { CR28, 0x3e }, { CR29, 0x00 },
- { CR44, 0x33 },
+ { ZD_CR15, 0x20 }, { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 },
+ { ZD_CR26, 0x11 }, { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 },
+ { ZD_CR44, 0x33 },
/* This value is different for 7230 (was: 0x2a) */
- { CR106, 0x22 },
- { CR107, 0x1a }, { CR109, 0x09 }, { CR110, 0x27 },
- { CR111, 0x2b }, { CR112, 0x2b }, { CR119, 0x0a },
+ { ZD_CR106, 0x22 },
+ { ZD_CR107, 0x1a }, { ZD_CR109, 0x09 }, { ZD_CR110, 0x27 },
+ { ZD_CR111, 0x2b }, { ZD_CR112, 0x2b }, { ZD_CR119, 0x0a },
/* This happened further down in AL2230,
* and the value changed (was: 0xe0) */
- { CR122, 0xfc },
- { CR10, 0x89 },
+ { ZD_CR122, 0xfc },
+ { ZD_CR10, 0x89 },
/* for newest (3rd cut) AL2300 */
- { CR17, 0x28 },
- { CR26, 0x93 }, { CR34, 0x30 },
+ { ZD_CR17, 0x28 },
+ { ZD_CR26, 0x93 }, { ZD_CR34, 0x30 },
/* for newest (3rd cut) AL2300 */
- { CR35, 0x3e },
- { CR41, 0x24 }, { CR44, 0x32 },
+ { ZD_CR35, 0x3e },
+ { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 },
/* for newest (3rd cut) AL2300 */
- { CR46, 0x96 },
- { CR47, 0x1e }, { CR79, 0x58 }, { CR80, 0x30 },
- { CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 },
- { CR92, 0x0a }, { CR99, 0x28 },
+ { ZD_CR46, 0x96 },
+ { ZD_CR47, 0x1e }, { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 },
+ { ZD_CR81, 0x30 }, { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 },
+ { ZD_CR92, 0x0a }, { ZD_CR99, 0x28 },
/* This value is different for 7230 (was: 0x00) */
- { CR100, 0x02 },
- { CR101, 0x13 }, { CR102, 0x27 },
+ { ZD_CR100, 0x02 },
+ { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 },
/* This value is different for 7230 (was: 0x24) */
- { CR106, 0x22 },
+ { ZD_CR106, 0x22 },
/* This value is different for 7230 (was: 0x2a) */
- { CR107, 0x3f },
- { CR109, 0x09 },
+ { ZD_CR107, 0x3f },
+ { ZD_CR109, 0x09 },
/* This value is different for 7230 (was: 0x13) */
- { CR110, 0x1f },
- { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 },
- { CR114, 0x27 },
+ { ZD_CR110, 0x1f },
+ { ZD_CR111, 0x1f }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 },
+ { ZD_CR114, 0x27 },
/* for newest (3rd cut) AL2300 */
- { CR115, 0x24 },
+ { ZD_CR115, 0x24 },
/* This value is different for 7230 (was: 0x24) */
- { CR116, 0x3f },
+ { ZD_CR116, 0x3f },
/* This value is different for 7230 (was: 0xf4) */
- { CR117, 0xfa },
- { CR118, 0xfc }, { CR119, 0x10 }, { CR120, 0x4f },
- { CR121, 0x77 }, { CR137, 0x88 },
+ { ZD_CR117, 0xfa },
+ { ZD_CR118, 0xfc }, { ZD_CR119, 0x10 }, { ZD_CR120, 0x4f },
+ { ZD_CR121, 0x77 }, { ZD_CR137, 0x88 },
/* This one is 7230-specific */
- { CR138, 0xa8 },
+ { ZD_CR138, 0xa8 },
/* This value is different for 7230 (was: 0xff) */
- { CR252, 0x34 },
+ { ZD_CR252, 0x34 },
/* This value is different for 7230 (was: 0xff) */
- { CR253, 0x34 },
+ { ZD_CR253, 0x34 },
/* PLL_OFF */
- { CR251, 0x2f },
+ { ZD_CR251, 0x2f },
};
static const struct zd_ioreq16 ioreqs_2[] = {
- { CR251, 0x3f }, /* PLL_ON */
- { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
- { CR38, 0x38 }, { CR136, 0xdf },
+ { ZD_CR251, 0x3f }, /* PLL_ON */
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 },
+ { ZD_CR38, 0x38 }, { ZD_CR136, 0xdf },
};
r = zd_iowrite16a_locked(chip, ioreqs_1, ARRAY_SIZE(ioreqs_1));
@@ -192,10 +192,10 @@
if (r)
return r;
- r = zd_iowrite16_locked(chip, 0x06, CR203);
+ r = zd_iowrite16_locked(chip, 0x06, ZD_CR203);
if (r)
return r;
- r = zd_iowrite16_locked(chip, 0x80, CR240);
+ r = zd_iowrite16_locked(chip, 0x80, ZD_CR240);
if (r)
return r;
@@ -208,79 +208,79 @@
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs_1[] = {
- { CR240, 0x57 }, { CR9, 0x9 },
+ { ZD_CR240, 0x57 }, { ZD_CR9, 0x9 },
{ },
- { CR10, 0x8b }, { CR15, 0x20 },
- { CR17, 0x2B }, /* for newest (3rd cut) AL2230 */
- { CR20, 0x10 }, /* 4N25->Stone Request */
- { CR23, 0x40 }, { CR24, 0x20 }, { CR26, 0x93 },
- { CR28, 0x3e }, { CR29, 0x00 },
- { CR33, 0x28 }, /* 5613 */
- { CR34, 0x30 },
- { CR35, 0x3e }, /* for newest (3rd cut) AL2230 */
- { CR41, 0x24 }, { CR44, 0x32 },
- { CR46, 0x99 }, /* for newest (3rd cut) AL2230 */
- { CR47, 0x1e },
+ { ZD_CR10, 0x8b }, { ZD_CR15, 0x20 },
+ { ZD_CR17, 0x2B }, /* for newest (3rd cut) AL2230 */
+ { ZD_CR20, 0x10 }, /* 4N25->Stone Request */
+ { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 }, { ZD_CR26, 0x93 },
+ { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 },
+ { ZD_CR33, 0x28 }, /* 5613 */
+ { ZD_CR34, 0x30 },
+ { ZD_CR35, 0x3e }, /* for newest (3rd cut) AL2230 */
+ { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 },
+ { ZD_CR46, 0x99 }, /* for newest (3rd cut) AL2230 */
+ { ZD_CR47, 0x1e },
/* ZD1215 5610 */
- { CR48, 0x00 }, { CR49, 0x00 }, { CR51, 0x01 },
- { CR52, 0x80 }, { CR53, 0x7e }, { CR65, 0x00 },
- { CR66, 0x00 }, { CR67, 0x00 }, { CR68, 0x00 },
- { CR69, 0x28 },
+ { ZD_CR48, 0x00 }, { ZD_CR49, 0x00 }, { ZD_CR51, 0x01 },
+ { ZD_CR52, 0x80 }, { ZD_CR53, 0x7e }, { ZD_CR65, 0x00 },
+ { ZD_CR66, 0x00 }, { ZD_CR67, 0x00 }, { ZD_CR68, 0x00 },
+ { ZD_CR69, 0x28 },
- { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
- { CR87, 0x0A }, { CR89, 0x04 },
- { CR90, 0x58 }, /* 5112 */
- { CR91, 0x00 }, /* 5613 */
- { CR92, 0x0a },
- { CR98, 0x8d }, /* 4804, for 1212 new algorithm */
- { CR99, 0x00 }, { CR100, 0x02 }, { CR101, 0x13 },
- { CR102, 0x27 },
- { CR106, 0x20 }, /* change to 0x24 for AL7230B */
- { CR109, 0x13 }, /* 4804, for 1212 new algorithm */
- { CR112, 0x1f },
+ { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 },
+ { ZD_CR87, 0x0A }, { ZD_CR89, 0x04 },
+ { ZD_CR90, 0x58 }, /* 5112 */
+ { ZD_CR91, 0x00 }, /* 5613 */
+ { ZD_CR92, 0x0a },
+ { ZD_CR98, 0x8d }, /* 4804, for 1212 new algorithm */
+ { ZD_CR99, 0x00 }, { ZD_CR100, 0x02 }, { ZD_CR101, 0x13 },
+ { ZD_CR102, 0x27 },
+ { ZD_CR106, 0x20 }, /* change to 0x24 for AL7230B */
+ { ZD_CR109, 0x13 }, /* 4804, for 1212 new algorithm */
+ { ZD_CR112, 0x1f },
};
static const struct zd_ioreq16 ioreqs_new_phy[] = {
- { CR107, 0x28 },
- { CR110, 0x1f }, /* 5127, 0x13->0x1f */
- { CR111, 0x1f }, /* 0x13 to 0x1f for AL7230B */
- { CR116, 0x2a }, { CR118, 0xfa }, { CR119, 0x12 },
- { CR121, 0x6c }, /* 5613 */
+ { ZD_CR107, 0x28 },
+ { ZD_CR110, 0x1f }, /* 5127, 0x13->0x1f */
+ { ZD_CR111, 0x1f }, /* 0x13 to 0x1f for AL7230B */
+ { ZD_CR116, 0x2a }, { ZD_CR118, 0xfa }, { ZD_CR119, 0x12 },
+ { ZD_CR121, 0x6c }, /* 5613 */
};
static const struct zd_ioreq16 ioreqs_old_phy[] = {
- { CR107, 0x24 },
- { CR110, 0x13 }, /* 5127, 0x13->0x1f */
- { CR111, 0x13 }, /* 0x13 to 0x1f for AL7230B */
- { CR116, 0x24 }, { CR118, 0xfc }, { CR119, 0x11 },
- { CR121, 0x6a }, /* 5613 */
+ { ZD_CR107, 0x24 },
+ { ZD_CR110, 0x13 }, /* 5127, 0x13->0x1f */
+ { ZD_CR111, 0x13 }, /* 0x13 to 0x1f for AL7230B */
+ { ZD_CR116, 0x24 }, { ZD_CR118, 0xfc }, { ZD_CR119, 0x11 },
+ { ZD_CR121, 0x6a }, /* 5613 */
};
static const struct zd_ioreq16 ioreqs_2[] = {
- { CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x24 },
- { CR117, 0xfa }, { CR120, 0x4f },
- { CR122, 0xfc }, /* E0->FCh at 4901 */
- { CR123, 0x57 }, /* 5613 */
- { CR125, 0xad }, /* 4804, for 1212 new algorithm */
- { CR126, 0x6c }, /* 5613 */
- { CR127, 0x03 }, /* 4804, for 1212 new algorithm */
- { CR130, 0x10 },
- { CR131, 0x00 }, /* 5112 */
- { CR137, 0x50 }, /* 5613 */
- { CR138, 0xa8 }, /* 5112 */
- { CR144, 0xac }, /* 5613 */
- { CR148, 0x40 }, /* 5112 */
- { CR149, 0x40 }, /* 4O07, 50->40 */
- { CR150, 0x1a }, /* 5112, 0C->1A */
- { CR252, 0x34 }, { CR253, 0x34 },
- { CR251, 0x2f }, /* PLL_OFF */
+ { ZD_CR113, 0x27 }, { ZD_CR114, 0x27 }, { ZD_CR115, 0x24 },
+ { ZD_CR117, 0xfa }, { ZD_CR120, 0x4f },
+ { ZD_CR122, 0xfc }, /* E0->FCh at 4901 */
+ { ZD_CR123, 0x57 }, /* 5613 */
+ { ZD_CR125, 0xad }, /* 4804, for 1212 new algorithm */
+ { ZD_CR126, 0x6c }, /* 5613 */
+ { ZD_CR127, 0x03 }, /* 4804, for 1212 new algorithm */
+ { ZD_CR130, 0x10 },
+ { ZD_CR131, 0x00 }, /* 5112 */
+ { ZD_CR137, 0x50 }, /* 5613 */
+ { ZD_CR138, 0xa8 }, /* 5112 */
+ { ZD_CR144, 0xac }, /* 5613 */
+ { ZD_CR148, 0x40 }, /* 5112 */
+ { ZD_CR149, 0x40 }, /* 4O07, 50->40 */
+ { ZD_CR150, 0x1a }, /* 5112, 0C->1A */
+ { ZD_CR252, 0x34 }, { ZD_CR253, 0x34 },
+ { ZD_CR251, 0x2f }, /* PLL_OFF */
};
static const struct zd_ioreq16 ioreqs_3[] = {
- { CR251, 0x7f }, /* PLL_ON */
- { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
- { CR38, 0x38 }, { CR136, 0xdf },
+ { ZD_CR251, 0x7f }, /* PLL_ON */
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 },
+ { ZD_CR38, 0x38 }, { ZD_CR136, 0xdf },
};
r = zd_iowrite16a_locked(chip, ioreqs_1, ARRAY_SIZE(ioreqs_1));
@@ -331,16 +331,16 @@
static const struct zd_ioreq16 ioreqs[] = {
/* PLL_ON */
- { CR251, 0x3f },
- { CR203, 0x06 }, { CR240, 0x08 },
+ { ZD_CR251, 0x3f },
+ { ZD_CR203, 0x06 }, { ZD_CR240, 0x08 },
};
- r = zd_iowrite16_locked(chip, 0x57, CR240);
+ r = zd_iowrite16_locked(chip, 0x57, ZD_CR240);
if (r)
return r;
/* PLL_OFF */
- r = zd_iowrite16_locked(chip, 0x2f, CR251);
+ r = zd_iowrite16_locked(chip, 0x2f, ZD_CR251);
if (r)
return r;
@@ -376,15 +376,15 @@
const u32 *rv = chan_rv[channel-1];
struct zd_chip *chip = zd_rf_to_chip(rf);
- r = zd_iowrite16_locked(chip, 0x57, CR240);
+ r = zd_iowrite16_locked(chip, 0x57, ZD_CR240);
if (r)
return r;
- r = zd_iowrite16_locked(chip, 0xe4, CR9);
+ r = zd_iowrite16_locked(chip, 0xe4, ZD_CR9);
if (r)
return r;
/* PLL_OFF */
- r = zd_iowrite16_locked(chip, 0x2f, CR251);
+ r = zd_iowrite16_locked(chip, 0x2f, ZD_CR251);
if (r)
return r;
r = zd_rfwritev_cr_locked(chip, std_rv, ARRAY_SIZE(std_rv));
@@ -410,7 +410,7 @@
if (r)
return r;
- r = zd_iowrite16_locked(chip, 0x7f, CR251);
+ r = zd_iowrite16_locked(chip, 0x7f, ZD_CR251);
if (r)
return r;
@@ -421,8 +421,8 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x00 },
- { CR251, 0x3f },
+ { ZD_CR11, 0x00 },
+ { ZD_CR251, 0x3f },
};
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -432,8 +432,8 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x00 },
- { CR251, 0x7f },
+ { ZD_CR11, 0x00 },
+ { ZD_CR251, 0x7f },
};
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -443,8 +443,8 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x04 },
- { CR251, 0x2f },
+ { ZD_CR11, 0x04 },
+ { ZD_CR251, 0x2f },
};
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
@@ -456,7 +456,7 @@
{
struct zd_chip *chip = zd_rf_to_chip(rf);
struct zd_ioreq16 ioreqs[] = {
- { CR128, 0x14 }, { CR129, 0x12 },
+ { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 },
};
/* FIXME: Channel 11 is not the edge for all regulatory domains. */
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
index e361174..784d9cc 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
@@ -152,44 +152,44 @@
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR2, 0x1E }, { CR9, 0x20 }, { CR10, 0x89 },
- { CR11, 0x00 }, { CR15, 0xD0 }, { CR17, 0x68 },
- { CR19, 0x4a }, { CR20, 0x0c }, { CR21, 0x0E },
- { CR23, 0x48 },
+ { ZD_CR2, 0x1E }, { ZD_CR9, 0x20 }, { ZD_CR10, 0x89 },
+ { ZD_CR11, 0x00 }, { ZD_CR15, 0xD0 }, { ZD_CR17, 0x68 },
+ { ZD_CR19, 0x4a }, { ZD_CR20, 0x0c }, { ZD_CR21, 0x0E },
+ { ZD_CR23, 0x48 },
/* normal size for cca threshold */
- { CR24, 0x14 },
- /* { CR24, 0x20 }, */
- { CR26, 0x90 }, { CR27, 0x30 }, { CR29, 0x20 },
- { CR31, 0xb2 }, { CR32, 0x43 }, { CR33, 0x28 },
- { CR38, 0x30 }, { CR34, 0x0f }, { CR35, 0xF0 },
- { CR41, 0x2a }, { CR46, 0x7F }, { CR47, 0x1E },
- { CR51, 0xc5 }, { CR52, 0xc5 }, { CR53, 0xc5 },
- { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
- { CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 },
- { CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A },
- { CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 },
- /* { CR91, 0x18 }, */
+ { ZD_CR24, 0x14 },
+ /* { ZD_CR24, 0x20 }, */
+ { ZD_CR26, 0x90 }, { ZD_CR27, 0x30 }, { ZD_CR29, 0x20 },
+ { ZD_CR31, 0xb2 }, { ZD_CR32, 0x43 }, { ZD_CR33, 0x28 },
+ { ZD_CR38, 0x30 }, { ZD_CR34, 0x0f }, { ZD_CR35, 0xF0 },
+ { ZD_CR41, 0x2a }, { ZD_CR46, 0x7F }, { ZD_CR47, 0x1E },
+ { ZD_CR51, 0xc5 }, { ZD_CR52, 0xc5 }, { ZD_CR53, 0xc5 },
+ { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 },
+ { ZD_CR82, 0x00 }, { ZD_CR83, 0x24 }, { ZD_CR84, 0x04 },
+ { ZD_CR85, 0x00 }, { ZD_CR86, 0x10 }, { ZD_CR87, 0x2A },
+ { ZD_CR88, 0x10 }, { ZD_CR89, 0x24 }, { ZD_CR90, 0x18 },
+ /* { ZD_CR91, 0x18 }, */
/* should solve continuous CTS frame problems */
- { CR91, 0x00 },
- { CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 },
- { CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 },
- { CR98, 0x05 }, { CR99, 0x28 }, { CR100, 0x00 },
- { CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 },
- { CR104, 0x18 }, { CR105, 0x12 },
+ { ZD_CR91, 0x00 },
+ { ZD_CR92, 0x0a }, { ZD_CR93, 0x00 }, { ZD_CR94, 0x01 },
+ { ZD_CR95, 0x00 }, { ZD_CR96, 0x40 }, { ZD_CR97, 0x37 },
+ { ZD_CR98, 0x05 }, { ZD_CR99, 0x28 }, { ZD_CR100, 0x00 },
+ { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 }, { ZD_CR103, 0x27 },
+ { ZD_CR104, 0x18 }, { ZD_CR105, 0x12 },
/* normal size */
- { CR106, 0x1a },
- /* { CR106, 0x22 }, */
- { CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 },
- { CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 },
- { CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 },
- { CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 },
- { CR119, 0x16 },
+ { ZD_CR106, 0x1a },
+ /* { ZD_CR106, 0x22 }, */
+ { ZD_CR107, 0x24 }, { ZD_CR108, 0x0a }, { ZD_CR109, 0x13 },
+ { ZD_CR110, 0x2F }, { ZD_CR111, 0x27 }, { ZD_CR112, 0x27 },
+ { ZD_CR113, 0x27 }, { ZD_CR114, 0x27 }, { ZD_CR115, 0x40 },
+ { ZD_CR116, 0x40 }, { ZD_CR117, 0xF0 }, { ZD_CR118, 0xF0 },
+ { ZD_CR119, 0x16 },
/* no TX continuation */
- { CR122, 0x00 },
- /* { CR122, 0xff }, */
- { CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 },
- { CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB },
- { CR170, 0xBB },
+ { ZD_CR122, 0x00 },
+ /* { ZD_CR122, 0xff }, */
+ { ZD_CR127, 0x03 }, { ZD_CR131, 0x08 }, { ZD_CR138, 0x28 },
+ { ZD_CR148, 0x44 }, { ZD_CR150, 0x10 }, { ZD_CR169, 0xBB },
+ { ZD_CR170, 0xBB },
};
static const u32 rv[] = {
@@ -210,7 +210,7 @@
*/
0x294128, /* internal power */
/* 0x28252c, */ /* External control TX power */
- /* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */
+ /* ZD_CR31_CCK, ZD_CR51_6-36M, ZD_CR52_48M, ZD_CR53_54M */
0x2c0000,
0x300000,
0x340000, /* REG13(0xD) */
@@ -245,8 +245,8 @@
static int rf2959_switch_radio_on(struct zd_rf *rf)
{
static const struct zd_ioreq16 ioreqs[] = {
- { CR10, 0x89 },
- { CR11, 0x00 },
+ { ZD_CR10, 0x89 },
+ { ZD_CR11, 0x00 },
};
struct zd_chip *chip = zd_rf_to_chip(rf);
@@ -256,8 +256,8 @@
static int rf2959_switch_radio_off(struct zd_rf *rf)
{
static const struct zd_ioreq16 ioreqs[] = {
- { CR10, 0x15 },
- { CR11, 0x81 },
+ { ZD_CR10, 0x15 },
+ { ZD_CR11, 0x81 },
};
struct zd_chip *chip = zd_rf_to_chip(rf);
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
index ba0a0cc..c4d324e 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
@@ -314,42 +314,44 @@
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR10, 0x89 }, { CR15, 0x20 },
- { CR17, 0x28 }, /* 6112 no change */
- { CR23, 0x38 }, { CR24, 0x20 }, { CR26, 0x93 },
- { CR27, 0x15 }, { CR28, 0x3e }, { CR29, 0x00 },
- { CR33, 0x28 }, { CR34, 0x30 },
- { CR35, 0x43 }, /* 6112 3e->43 */
- { CR41, 0x24 }, { CR44, 0x32 },
- { CR46, 0x92 }, /* 6112 96->92 */
- { CR47, 0x1e },
- { CR48, 0x04 }, /* 5602 Roger */
- { CR49, 0xfa }, { CR79, 0x58 }, { CR80, 0x30 },
- { CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 },
- { CR91, 0x00 }, { CR92, 0x0a }, { CR98, 0x8d },
- { CR99, 0x28 }, { CR100, 0x02 },
- { CR101, 0x09 }, /* 6112 13->1f 6220 1f->13 6407 13->9 */
- { CR102, 0x27 },
- { CR106, 0x1c }, /* 5d07 5112 1f->1c 6220 1c->1f 6221 1f->1c */
- { CR107, 0x1c }, /* 6220 1c->1a 5221 1a->1c */
- { CR109, 0x13 },
- { CR110, 0x1f }, /* 6112 13->1f 6221 1f->13 6407 13->0x09 */
- { CR111, 0x13 }, { CR112, 0x1f }, { CR113, 0x27 },
- { CR114, 0x23 }, /* 6221 27->23 */
- { CR115, 0x24 }, /* 6112 24->1c 6220 1c->24 */
- { CR116, 0x24 }, /* 6220 1c->24 */
- { CR117, 0xfa }, /* 6112 fa->f8 6220 f8->f4 6220 f4->fa */
- { CR118, 0xf0 }, /* 5d07 6112 f0->f2 6220 f2->f0 */
- { CR119, 0x1a }, /* 6112 1a->10 6220 10->14 6220 14->1a */
- { CR120, 0x4f },
- { CR121, 0x1f }, /* 6220 4f->1f */
- { CR122, 0xf0 }, { CR123, 0x57 }, { CR125, 0xad },
- { CR126, 0x6c }, { CR127, 0x03 },
- { CR128, 0x14 }, /* 6302 12->11 */
- { CR129, 0x12 }, /* 6301 10->0f */
- { CR130, 0x10 }, { CR137, 0x50 }, { CR138, 0xa8 },
- { CR144, 0xac }, { CR146, 0x20 }, { CR252, 0xff },
- { CR253, 0xff },
+ { ZD_CR10, 0x89 }, { ZD_CR15, 0x20 },
+ { ZD_CR17, 0x28 }, /* 6112 no change */
+ { ZD_CR23, 0x38 }, { ZD_CR24, 0x20 }, { ZD_CR26, 0x93 },
+ { ZD_CR27, 0x15 }, { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 },
+ { ZD_CR33, 0x28 }, { ZD_CR34, 0x30 },
+ { ZD_CR35, 0x43 }, /* 6112 3e->43 */
+ { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 },
+ { ZD_CR46, 0x92 }, /* 6112 96->92 */
+ { ZD_CR47, 0x1e },
+ { ZD_CR48, 0x04 }, /* 5602 Roger */
+ { ZD_CR49, 0xfa }, { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 },
+ { ZD_CR81, 0x30 }, { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 },
+ { ZD_CR91, 0x00 }, { ZD_CR92, 0x0a }, { ZD_CR98, 0x8d },
+ { ZD_CR99, 0x28 }, { ZD_CR100, 0x02 },
+ { ZD_CR101, 0x09 }, /* 6112 13->1f 6220 1f->13 6407 13->9 */
+ { ZD_CR102, 0x27 },
+ { ZD_CR106, 0x1c }, /* 5d07 5112 1f->1c 6220 1c->1f
+ * 6221 1f->1c
+ */
+ { ZD_CR107, 0x1c }, /* 6220 1c->1a 5221 1a->1c */
+ { ZD_CR109, 0x13 },
+ { ZD_CR110, 0x1f }, /* 6112 13->1f 6221 1f->13 6407 13->0x09 */
+ { ZD_CR111, 0x13 }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 },
+ { ZD_CR114, 0x23 }, /* 6221 27->23 */
+ { ZD_CR115, 0x24 }, /* 6112 24->1c 6220 1c->24 */
+ { ZD_CR116, 0x24 }, /* 6220 1c->24 */
+ { ZD_CR117, 0xfa }, /* 6112 fa->f8 6220 f8->f4 6220 f4->fa */
+ { ZD_CR118, 0xf0 }, /* 5d07 6112 f0->f2 6220 f2->f0 */
+ { ZD_CR119, 0x1a }, /* 6112 1a->10 6220 10->14 6220 14->1a */
+ { ZD_CR120, 0x4f },
+ { ZD_CR121, 0x1f }, /* 6220 4f->1f */
+ { ZD_CR122, 0xf0 }, { ZD_CR123, 0x57 }, { ZD_CR125, 0xad },
+ { ZD_CR126, 0x6c }, { ZD_CR127, 0x03 },
+ { ZD_CR128, 0x14 }, /* 6302 12->11 */
+ { ZD_CR129, 0x12 }, /* 6301 10->0f */
+ { ZD_CR130, 0x10 }, { ZD_CR137, 0x50 }, { ZD_CR138, 0xa8 },
+ { ZD_CR144, 0xac }, { ZD_CR146, 0x20 }, { ZD_CR252, 0xff },
+ { ZD_CR253, 0xff },
};
static const u32 rv[] = {
@@ -433,7 +435,7 @@
* the one that produced a lock. */
UW2453_PRIV(rf)->config = found_config + 1;
- return zd_iowrite16_locked(chip, 0x06, CR203);
+ return zd_iowrite16_locked(chip, 0x06, ZD_CR203);
}
static int uw2453_set_channel(struct zd_rf *rf, u8 channel)
@@ -445,8 +447,8 @@
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR80, 0x30 }, { CR81, 0x30 }, { CR79, 0x58 },
- { CR12, 0xf0 }, { CR77, 0x1b }, { CR78, 0x58 },
+ { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, { ZD_CR79, 0x58 },
+ { ZD_CR12, 0xf0 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x58 },
};
r = uw2453_synth_set_channel(chip, channel, autocal);
@@ -474,7 +476,7 @@
if (r)
return r;
- return zd_iowrite16_locked(chip, 0x06, CR203);
+ return zd_iowrite16_locked(chip, 0x06, ZD_CR203);
}
static int uw2453_switch_radio_on(struct zd_rf *rf)
@@ -482,7 +484,7 @@
int r;
struct zd_chip *chip = zd_rf_to_chip(rf);
struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x00 }, { CR251, 0x3f },
+ { ZD_CR11, 0x00 }, { ZD_CR251, 0x3f },
};
/* enter RXTX mode */
@@ -501,7 +503,7 @@
int r;
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
- { CR11, 0x04 }, { CR251, 0x2f },
+ { ZD_CR11, 0x04 }, { ZD_CR251, 0x2f },
};
/* enter IDLE mode */
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ab607bb..0e81994 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1893,10 +1893,10 @@
dev_dbg_f(zd_usb_dev(usb), "value %#09x bits %d\n", value, bits);
- r = zd_usb_ioread16(usb, &bit_value_template, CR203);
+ r = zd_usb_ioread16(usb, &bit_value_template, ZD_CR203);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error %d: Couldn't read CR203\n", r);
+ "error %d: Couldn't read ZD_CR203\n", r);
return r;
}
bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA);
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h
index 325d0f9..bf94284 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.h
+++ b/drivers/net/wireless/zd1211rw/zd_usb.h
@@ -109,7 +109,7 @@
__le16 bits;
/* RF2595: 24 */
__le16 bit_values[0];
- /* (CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */
+ /* (ZD_CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */
} __packed;
/* USB interrupt */
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 5d7bbf2..161f207 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -73,9 +73,6 @@
struct vm_struct *tx_comms_area;
struct vm_struct *rx_comms_area;
- /* Flags that must not be set in dev->features */
- u32 features_disabled;
-
/* Frontend feature information. */
u8 can_sg:1;
u8 gso:1;
@@ -109,8 +106,8 @@
wait_queue_head_t waiting_to_free;
};
-#define XEN_NETIF_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
-#define XEN_NETIF_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define XEN_NETIF_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
+#define XEN_NETIF_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
struct xenvif *xenvif_alloc(struct device *parent,
domid_t domid,
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index de569cc..0ca86f9 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -165,69 +165,18 @@
return 0;
}
-static void xenvif_set_features(struct xenvif *vif)
-{
- struct net_device *dev = vif->dev;
- u32 features = dev->features;
-
- if (vif->can_sg)
- features |= NETIF_F_SG;
- if (vif->gso || vif->gso_prefix)
- features |= NETIF_F_TSO;
- if (vif->csum)
- features |= NETIF_F_IP_CSUM;
-
- features &= ~(vif->features_disabled);
-
- if (!(features & NETIF_F_SG) && dev->mtu > ETH_DATA_LEN)
- dev->mtu = ETH_DATA_LEN;
-
- dev->features = features;
-}
-
-static int xenvif_set_tx_csum(struct net_device *dev, u32 data)
+static u32 xenvif_fix_features(struct net_device *dev, u32 features)
{
struct xenvif *vif = netdev_priv(dev);
- if (data) {
- if (!vif->csum)
- return -EOPNOTSUPP;
- vif->features_disabled &= ~NETIF_F_IP_CSUM;
- } else {
- vif->features_disabled |= NETIF_F_IP_CSUM;
- }
- xenvif_set_features(vif);
- return 0;
-}
+ if (!vif->can_sg)
+ features &= ~NETIF_F_SG;
+ if (!vif->gso && !vif->gso_prefix)
+ features &= ~NETIF_F_TSO;
+ if (!vif->csum)
+ features &= ~NETIF_F_IP_CSUM;
-static int xenvif_set_sg(struct net_device *dev, u32 data)
-{
- struct xenvif *vif = netdev_priv(dev);
- if (data) {
- if (!vif->can_sg)
- return -EOPNOTSUPP;
- vif->features_disabled &= ~NETIF_F_SG;
- } else {
- vif->features_disabled |= NETIF_F_SG;
- }
-
- xenvif_set_features(vif);
- return 0;
-}
-
-static int xenvif_set_tso(struct net_device *dev, u32 data)
-{
- struct xenvif *vif = netdev_priv(dev);
- if (data) {
- if (!vif->gso && !vif->gso_prefix)
- return -EOPNOTSUPP;
- vif->features_disabled &= ~NETIF_F_TSO;
- } else {
- vif->features_disabled |= NETIF_F_TSO;
- }
-
- xenvif_set_features(vif);
- return 0;
+ return features;
}
static const struct xenvif_stat {
@@ -274,12 +223,6 @@
}
static struct ethtool_ops xenvif_ethtool_ops = {
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = xenvif_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = xenvif_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = xenvif_set_tso,
.get_link = ethtool_op_get_link,
.get_sset_count = xenvif_get_sset_count,
@@ -293,6 +236,7 @@
.ndo_open = xenvif_open,
.ndo_stop = xenvif_close,
.ndo_change_mtu = xenvif_change_mtu,
+ .ndo_fix_features = xenvif_fix_features,
};
struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
@@ -331,7 +275,8 @@
vif->credit_timeout.expires = jiffies;
dev->netdev_ops = &xenvif_netdev_ops;
- xenvif_set_features(vif);
+ dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
+ dev->features = dev->hw_features;
SET_ETHTOOL_OPS(dev, &xenvif_ethtool_ops);
dev->tx_queue_len = XENVIF_QUEUE_LENGTH;
@@ -367,8 +312,6 @@
if (vif->irq)
return 0;
- xenvif_set_features(vif);
-
err = xen_netbk_map_frontend_rings(vif, tx_ring_ref, rx_ring_ref);
if (err < 0)
goto err;
@@ -384,9 +327,12 @@
xenvif_get(vif);
rtnl_lock();
- netif_carrier_on(vif->dev);
if (netif_running(vif->dev))
xenvif_up(vif);
+ if (!vif->can_sg && vif->dev->mtu > ETH_DATA_LEN)
+ dev_set_mtu(vif->dev, ETH_DATA_LEN);
+ netdev_update_features(vif->dev);
+ netif_carrier_on(vif->dev);
rtnl_unlock();
return 0;
diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 22b8c35..1ce729d 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -26,7 +26,7 @@
struct xenvif *vif;
enum xenbus_state frontend_state;
struct xenbus_watch hotplug_status_watch;
- int have_hotplug_status_watch:1;
+ u8 have_hotplug_status_watch:1;
};
static int connect_rings(struct backend_info *);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 5c8d9c3..db9a763 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1140,6 +1140,42 @@
gnttab_free_grant_references(np->gref_rx_head);
}
+static u32 xennet_fix_features(struct net_device *dev, u32 features)
+{
+ struct netfront_info *np = netdev_priv(dev);
+ int val;
+
+ if (features & NETIF_F_SG) {
+ if (xenbus_scanf(XBT_NIL, np->xbdev->otherend, "feature-sg",
+ "%d", &val) < 0)
+ val = 0;
+
+ if (!val)
+ features &= ~NETIF_F_SG;
+ }
+
+ if (features & NETIF_F_TSO) {
+ if (xenbus_scanf(XBT_NIL, np->xbdev->otherend,
+ "feature-gso-tcpv4", "%d", &val) < 0)
+ val = 0;
+
+ if (!val)
+ features &= ~NETIF_F_TSO;
+ }
+
+ return features;
+}
+
+static int xennet_set_features(struct net_device *dev, u32 features)
+{
+ if (!(features & NETIF_F_SG) && dev->mtu > ETH_DATA_LEN) {
+ netdev_info(dev, "Reducing MTU because no SG offload");
+ dev->mtu = ETH_DATA_LEN;
+ }
+
+ return 0;
+}
+
static const struct net_device_ops xennet_netdev_ops = {
.ndo_open = xennet_open,
.ndo_uninit = xennet_uninit,
@@ -1148,6 +1184,8 @@
.ndo_change_mtu = xennet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+ .ndo_fix_features = xennet_fix_features,
+ .ndo_set_features = xennet_set_features,
};
static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev)
@@ -1209,7 +1247,17 @@
netdev->netdev_ops = &xennet_netdev_ops;
netif_napi_add(netdev, &np->napi, xennet_poll, 64);
- netdev->features = NETIF_F_IP_CSUM;
+ netdev->features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_GSO_ROBUST;
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ /*
+ * Assume that all hw features are available for now. This set
+ * will be adjusted by the call to netdev_update_features() in
+ * xennet_connect() which is the earliest point where we can
+ * negotiate with the backend regarding supported features.
+ */
+ netdev->features |= netdev->hw_features;
SET_ETHTOOL_OPS(netdev, &xennet_ethtool_ops);
SET_NETDEV_DEV(netdev, &dev->dev);
@@ -1416,8 +1464,7 @@
goto fail;
err = bind_evtchn_to_irqhandler(info->evtchn, xennet_interrupt,
- IRQF_SAMPLE_RANDOM, netdev->name,
- netdev);
+ 0, netdev->name, netdev);
if (err < 0)
goto fail;
netdev->irq = err;
@@ -1510,54 +1557,6 @@
return err;
}
-static int xennet_set_sg(struct net_device *dev, u32 data)
-{
- if (data) {
- struct netfront_info *np = netdev_priv(dev);
- int val;
-
- if (xenbus_scanf(XBT_NIL, np->xbdev->otherend, "feature-sg",
- "%d", &val) < 0)
- val = 0;
- if (!val)
- return -ENOSYS;
- } else if (dev->mtu > ETH_DATA_LEN)
- dev->mtu = ETH_DATA_LEN;
-
- return ethtool_op_set_sg(dev, data);
-}
-
-static int xennet_set_tso(struct net_device *dev, u32 data)
-{
- if (data) {
- struct netfront_info *np = netdev_priv(dev);
- int val;
-
- if (xenbus_scanf(XBT_NIL, np->xbdev->otherend,
- "feature-gso-tcpv4", "%d", &val) < 0)
- val = 0;
- if (!val)
- return -ENOSYS;
- }
-
- return ethtool_op_set_tso(dev, data);
-}
-
-static void xennet_set_features(struct net_device *dev)
-{
- /* Turn off all GSO bits except ROBUST. */
- dev->features &= ~NETIF_F_GSO_MASK;
- dev->features |= NETIF_F_GSO_ROBUST;
- xennet_set_sg(dev, 0);
-
- /* We need checksum offload to enable scatter/gather and TSO. */
- if (!(dev->features & NETIF_F_IP_CSUM))
- return;
-
- if (!xennet_set_sg(dev, 1))
- xennet_set_tso(dev, 1);
-}
-
static int xennet_connect(struct net_device *dev)
{
struct netfront_info *np = netdev_priv(dev);
@@ -1582,7 +1581,7 @@
if (err)
return err;
- xennet_set_features(dev);
+ netdev_update_features(dev);
spin_lock_bh(&np->rx_lock);
spin_lock_irq(&np->tx_lock);
@@ -1710,9 +1709,6 @@
static const struct ethtool_ops xennet_ethtool_ops =
{
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = xennet_set_sg,
- .set_tso = xennet_set_tso,
.get_link = ethtool_op_get_link,
.get_sset_count = xennet_get_sset_count,
diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index b78a38d..8c7c522 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -126,7 +126,7 @@
board = z->resource.start;
ioaddr = board+cards[i].offset;
- dev = alloc_ei_netdev();
+ dev = ____alloc_ei_netdev(0);
if (!dev)
return -ENOMEM;
if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, DRV_NAME)) {
@@ -146,15 +146,15 @@
static const struct net_device_ops zorro8390_netdev_ops = {
.ndo_open = zorro8390_open,
.ndo_stop = zorro8390_close,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 75b0d3c..9f689f1d 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -56,7 +56,7 @@
* Returns a pointer to the interrupt parent node, or NULL if the interrupt
* parent could not be determined.
*/
-static struct device_node *of_irq_find_parent(struct device_node *child)
+struct device_node *of_irq_find_parent(struct device_node *child)
{
struct device_node *p;
const __be32 *parp;
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index d552d2c..6af6b62 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
#include <linux/syscore_ops.h>
#include <linux/tboot.h>
#include <linux/dmi.h>
+#include <linux/pci-ats.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
#include "pci.h"
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 553d8ee..42fae47 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -13,6 +13,7 @@
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/delay.h>
+#include <linux/pci-ats.h>
#include "pci.h"
#define VIRTFN_ID_LEN 16
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a6ec200..4020025 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -250,15 +250,6 @@
u8 __iomem *mstate; /* VF Migration State Array */
};
-/* Address Translation Service */
-struct pci_ats {
- int pos; /* capability position */
- int stu; /* Smallest Translation Unit */
- int qdep; /* Invalidate Queue Depth */
- int ref_cnt; /* Physical Function reference count */
- unsigned int is_enabled:1; /* Enable bit is set */
-};
-
#ifdef CONFIG_PCI_IOV
extern int pci_iov_init(struct pci_dev *dev);
extern void pci_iov_release(struct pci_dev *dev);
@@ -269,19 +260,6 @@
extern void pci_restore_iov_state(struct pci_dev *dev);
extern int pci_iov_bus_range(struct pci_bus *bus);
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
- return dev->ats && dev->ats->is_enabled;
-}
#else
static inline int pci_iov_init(struct pci_dev *dev)
{
@@ -304,21 +282,6 @@
return 0;
}
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
- return -ENODEV;
-}
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
- return -ENODEV;
-}
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
- return 0;
-}
#endif /* CONFIG_PCI_IOV */
static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index ebf51ad..a806cb3 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -579,7 +579,7 @@
}
size0 = calculate_iosize(size, min_size, size1,
resource_size(b_res), 4096);
- size1 = !add_size? size0:
+ size1 = (!add_head || (add_head && !add_size)) ? size0 :
calculate_iosize(size, min_size+add_size, size1,
resource_size(b_res), 4096);
if (!size0 && !size1) {
@@ -677,7 +677,7 @@
align += aligns[order];
}
size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
- size1 = !add_size ? size :
+ size1 = (!add_head || (add_head && !add_size)) ? size0 :
calculate_memsize(size, min_size+add_size, 0,
resource_size(b_res), min_align);
if (!size0 && !size1) {
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 5f2dd38..2c1abf6 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -585,8 +585,9 @@
return true;
}
-static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
+static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
{
+ struct pci_dev *port;
struct pci_dev *dev;
struct pci_bus *bus;
bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
@@ -599,9 +600,16 @@
mutex_lock(&eeepc->hotplug_lock);
if (eeepc->hotplug_slot) {
- bus = pci_find_bus(0, 1);
+ port = acpi_get_pci_dev(handle);
+ if (!port) {
+ pr_warning("Unable to find port\n");
+ goto out_unlock;
+ }
+
+ bus = port->subordinate;
+
if (!bus) {
- pr_warning("Unable to find PCI bus 1?\n");
+ pr_warning("Unable to find PCI bus?\n");
goto out_unlock;
}
@@ -609,6 +617,7 @@
pr_err("Unable to read PCI config space?\n");
goto out_unlock;
}
+
absent = (l == 0xffffffff);
if (blocked != absent) {
@@ -647,6 +656,17 @@
mutex_unlock(&eeepc->hotplug_lock);
}
+static void eeepc_rfkill_hotplug_update(struct eeepc_laptop *eeepc, char *node)
+{
+ acpi_status status = AE_OK;
+ acpi_handle handle;
+
+ status = acpi_get_handle(NULL, node, &handle);
+
+ if (ACPI_SUCCESS(status))
+ eeepc_rfkill_hotplug(eeepc, handle);
+}
+
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
{
struct eeepc_laptop *eeepc = data;
@@ -654,7 +674,7 @@
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug(eeepc);
+ eeepc_rfkill_hotplug(eeepc, handle);
}
static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
@@ -672,6 +692,11 @@
eeepc);
if (ACPI_FAILURE(status))
pr_warning("Failed to register notify on %s\n", node);
+ /*
+ * Refresh pci hotplug in case the rfkill state was
+ * changed during setup.
+ */
+ eeepc_rfkill_hotplug(eeepc, handle);
} else
return -ENODEV;
@@ -693,6 +718,12 @@
if (ACPI_FAILURE(status))
pr_err("Error removing rfkill notify handler %s\n",
node);
+ /*
+ * Refresh pci hotplug in case the rfkill
+ * state was changed after
+ * eeepc_unregister_rfkill_notifier()
+ */
+ eeepc_rfkill_hotplug(eeepc, handle);
}
}
@@ -816,11 +847,7 @@
rfkill_destroy(eeepc->wlan_rfkill);
eeepc->wlan_rfkill = NULL;
}
- /*
- * Refresh pci hotplug in case the rfkill state was changed after
- * eeepc_unregister_rfkill_notifier()
- */
- eeepc_rfkill_hotplug(eeepc);
+
if (eeepc->hotplug_slot)
pci_hp_deregister(eeepc->hotplug_slot);
@@ -889,11 +916,6 @@
eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P5");
eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P7");
- /*
- * Refresh pci hotplug in case the rfkill state was changed during
- * setup.
- */
- eeepc_rfkill_hotplug(eeepc);
exit:
if (result && result != -ENODEV)
@@ -928,8 +950,11 @@
struct eeepc_laptop *eeepc = dev_get_drvdata(device);
/* Refresh both wlan rfkill state and pci hotplug */
- if (eeepc->wlan_rfkill)
- eeepc_rfkill_hotplug(eeepc);
+ if (eeepc->wlan_rfkill) {
+ eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P5");
+ eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P6");
+ eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P7");
+ }
if (eeepc->bluetooth_rfkill)
rfkill_set_sw_state(eeepc->bluetooth_rfkill,
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 8f709ae..6fe8cd6 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -934,6 +934,14 @@
/*
* Backlight device
*/
+struct sony_backlight_props {
+ struct backlight_device *dev;
+ int handle;
+ u8 offset;
+ u8 maxlvl;
+};
+struct sony_backlight_props sony_bl_props;
+
static int sony_backlight_update_status(struct backlight_device *bd)
{
return acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
@@ -954,21 +962,26 @@
{
int result;
int *handle = (int *)bl_get_data(bd);
+ struct sony_backlight_props *sdev =
+ (struct sony_backlight_props *)bl_get_data(bd);
- sony_call_snc_handle(*handle, 0x0200, &result);
+ sony_call_snc_handle(sdev->handle, 0x0200, &result);
- return result & 0xff;
+ return (result & 0xff) - sdev->offset;
}
static int sony_nc_update_status_ng(struct backlight_device *bd)
{
int value, result;
int *handle = (int *)bl_get_data(bd);
+ struct sony_backlight_props *sdev =
+ (struct sony_backlight_props *)bl_get_data(bd);
- value = bd->props.brightness;
- sony_call_snc_handle(*handle, 0x0100 | (value << 16), &result);
+ value = bd->props.brightness + sdev->offset;
+ if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result))
+ return -EIO;
- return sony_nc_get_brightness_ng(bd);
+ return value;
}
static const struct backlight_ops sony_backlight_ops = {
@@ -981,8 +994,6 @@
.update_status = sony_nc_update_status_ng,
.get_brightness = sony_nc_get_brightness_ng,
};
-static int backlight_ng_handle;
-static struct backlight_device *sony_backlight_device;
/*
* New SNC-only Vaios event mapping to driver known keys
@@ -1549,6 +1560,75 @@
&ignore);
}
+static void sony_nc_backlight_ng_read_limits(int handle,
+ struct sony_backlight_props *props)
+{
+ int offset;
+ acpi_status status;
+ u8 brlvl, i;
+ u8 min = 0xff, max = 0x00;
+ struct acpi_object_list params;
+ union acpi_object in_obj;
+ union acpi_object *lvl_enum;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ props->handle = handle;
+ props->offset = 0;
+ props->maxlvl = 0xff;
+
+ offset = sony_find_snc_handle(handle);
+ if (offset < 0)
+ return;
+
+ /* try to read the boundaries from ACPI tables, if we fail the above
+ * defaults should be reasonable
+ */
+ params.count = 1;
+ params.pointer = &in_obj;
+ in_obj.type = ACPI_TYPE_INTEGER;
+ in_obj.integer.value = offset;
+ status = acpi_evaluate_object(sony_nc_acpi_handle, "SN06", ¶ms,
+ &buffer);
+ if (ACPI_FAILURE(status))
+ return;
+
+ lvl_enum = (union acpi_object *) buffer.pointer;
+ if (!lvl_enum) {
+ pr_err("No SN06 return object.");
+ return;
+ }
+ if (lvl_enum->type != ACPI_TYPE_BUFFER) {
+ pr_err("Invalid SN06 return object 0x%.2x\n",
+ lvl_enum->type);
+ goto out_invalid;
+ }
+
+ /* the buffer lists brightness levels available, brightness levels are
+ * from 0 to 8 in the array, other values are used by ALS control.
+ */
+ for (i = 0; i < 9 && i < lvl_enum->buffer.length; i++) {
+
+ brlvl = *(lvl_enum->buffer.pointer + i);
+ dprintk("Brightness level: %d\n", brlvl);
+
+ if (!brlvl)
+ break;
+
+ if (brlvl > max)
+ max = brlvl;
+ if (brlvl < min)
+ min = brlvl;
+ }
+ props->offset = min;
+ props->maxlvl = max;
+ dprintk("Brightness levels: min=%d max=%d\n", props->offset,
+ props->maxlvl);
+
+out_invalid:
+ kfree(buffer.pointer);
+ return;
+}
+
static void sony_nc_backlight_setup(void)
{
acpi_handle unused;
@@ -1557,14 +1637,14 @@
struct backlight_properties props;
if (sony_find_snc_handle(0x12f) != -1) {
- backlight_ng_handle = 0x12f;
ops = &sony_backlight_ng_ops;
- max_brightness = 0xff;
+ sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props);
+ max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
} else if (sony_find_snc_handle(0x137) != -1) {
- backlight_ng_handle = 0x137;
ops = &sony_backlight_ng_ops;
- max_brightness = 0xff;
+ sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props);
+ max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&unused))) {
@@ -1577,22 +1657,22 @@
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = max_brightness;
- sony_backlight_device = backlight_device_register("sony", NULL,
- &backlight_ng_handle,
- ops, &props);
+ sony_bl_props.dev = backlight_device_register("sony", NULL,
+ &sony_bl_props,
+ ops, &props);
- if (IS_ERR(sony_backlight_device)) {
- pr_warning(DRV_PFX "unable to register backlight device\n");
- sony_backlight_device = NULL;
+ if (IS_ERR(sony_bl_props.dev)) {
+ pr_warn(DRV_PFX "unable to register backlight device\n");
+ sony_bl_props.dev = NULL;
} else
- sony_backlight_device->props.brightness =
- ops->get_brightness(sony_backlight_device);
+ sony_bl_props.dev->props.brightness =
+ ops->get_brightness(sony_bl_props.dev);
}
static void sony_nc_backlight_cleanup(void)
{
- if (sony_backlight_device)
- backlight_device_unregister(sony_backlight_device);
+ if (sony_bl_props.dev)
+ backlight_device_unregister(sony_bl_props.dev);
}
static int sony_nc_add(struct acpi_device *device)
@@ -2590,7 +2670,7 @@
mutex_lock(&spic_dev.lock);
switch (cmd) {
case SONYPI_IOCGBRT:
- if (sony_backlight_device == NULL) {
+ if (sony_bl_props.dev == NULL) {
ret = -EIO;
break;
}
@@ -2603,7 +2683,7 @@
ret = -EFAULT;
break;
case SONYPI_IOCSBRT:
- if (sony_backlight_device == NULL) {
+ if (sony_bl_props.dev == NULL) {
ret = -EIO;
break;
}
@@ -2617,8 +2697,8 @@
break;
}
/* sync the backlight device status */
- sony_backlight_device->props.brightness =
- sony_backlight_get_brightness(sony_backlight_device);
+ sony_bl_props.dev->props.brightness =
+ sony_backlight_get_brightness(sony_bl_props.dev);
break;
case SONYPI_IOCGBAT1CAP:
if (ec_read16(SONYPI_BAT1_FULL, &val16)) {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index efb3b6b..562fcf0 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -128,7 +128,8 @@
};
/* ACPI HIDs */
-#define TPACPI_ACPI_HKEY_HID "IBM0068"
+#define TPACPI_ACPI_IBM_HKEY_HID "IBM0068"
+#define TPACPI_ACPI_LENOVO_HKEY_HID "LEN0068"
#define TPACPI_ACPI_EC_HID "PNP0C09"
/* Input IDs */
@@ -3879,7 +3880,8 @@
}
static const struct acpi_device_id ibm_htk_device_ids[] = {
- {TPACPI_ACPI_HKEY_HID, 0},
+ {TPACPI_ACPI_IBM_HKEY_HID, 0},
+ {TPACPI_ACPI_LENOVO_HKEY_HID, 0},
{"", 0},
};
diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c
index ac2701b..043ee31 100644
--- a/drivers/rapidio/switches/idt_gen2.c
+++ b/drivers/rapidio/switches/idt_gen2.c
@@ -95,6 +95,9 @@
else
table++;
+ if (route_port == RIO_INVALID_ROUTE)
+ route_port = IDT_DEFAULT_ROUTE;
+
rio_mport_write_config_32(mport, destid, hopcount,
LOCAL_RTE_CONF_DESTID_SEL, table);
@@ -411,6 +414,12 @@
rdev->rswitch->em_handle = idtg2_em_handler;
rdev->rswitch->sw_sysfs = idtg2_sysfs;
+ if (do_enum) {
+ /* Ensure that default routing is disabled on startup */
+ rio_write_config_32(rdev,
+ RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
+ }
+
return 0;
}
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
index 3a97107..d06ee2d 100644
--- a/drivers/rapidio/switches/idtcps.c
+++ b/drivers/rapidio/switches/idtcps.c
@@ -26,6 +26,9 @@
{
u32 result;
+ if (route_port == RIO_INVALID_ROUTE)
+ route_port = CPS_DEFAULT_ROUTE;
+
if (table == RIO_GLOBAL_TABLE) {
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
@@ -130,6 +133,9 @@
/* set TVAL = ~50us */
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+ /* Ensure that default routing is disabled on startup */
+ rio_write_config_32(rdev,
+ RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
}
return 0;
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index 1a62934..db8b802 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -303,6 +303,12 @@
rdev->rswitch->em_init = tsi57x_em_init;
rdev->rswitch->em_handle = tsi57x_em_handler;
+ if (do_enum) {
+ /* Ensure that default routing is disabled on startup */
+ rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT,
+ RIO_INVALID_ROUTE);
+ }
+
return 0;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e187887..4289172 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -3,10 +3,10 @@
#
config RTC_LIB
- tristate
+ bool
menuconfig RTC_CLASS
- tristate "Real Time Clock"
+ bool "Real Time Clock"
default n
depends on !S390
select RTC_LIB
@@ -15,9 +15,6 @@
be allowed to plug one or more RTCs to your system. You will
probably want to enable one or more of the interfaces below.
- This driver can also be built as a module. If so, the module
- will be called rtc-core.
-
if RTC_CLASS
config RTC_HCTOSYS
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 3901386..4194e59 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -41,26 +41,21 @@
* system's wall clock; restore it on resume().
*/
-static struct timespec delta;
static time_t oldtime;
+static struct timespec oldts;
static int rtc_suspend(struct device *dev, pm_message_t mesg)
{
struct rtc_device *rtc = to_rtc_device(dev);
struct rtc_time tm;
- struct timespec ts = current_kernel_time();
if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
return 0;
rtc_read_time(rtc, &tm);
+ ktime_get_ts(&oldts);
rtc_tm_to_time(&tm, &oldtime);
- /* RTC precision is 1 second; adjust delta for avg 1/2 sec err */
- set_normalized_timespec(&delta,
- ts.tv_sec - oldtime,
- ts.tv_nsec - (NSEC_PER_SEC >> 1));
-
return 0;
}
@@ -70,10 +65,12 @@
struct rtc_time tm;
time_t newtime;
struct timespec time;
+ struct timespec newts;
if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
return 0;
+ ktime_get_ts(&newts);
rtc_read_time(rtc, &tm);
if (rtc_valid_tm(&tm) != 0) {
pr_debug("%s: bogus resume time\n", dev_name(&rtc->dev));
@@ -85,15 +82,13 @@
pr_debug("%s: time travel!\n", dev_name(&rtc->dev));
return 0;
}
+ /* calculate the RTC time delta */
+ set_normalized_timespec(&time, newtime - oldtime, 0);
- /* restore wall clock using delta against this RTC;
- * adjust again for avg 1/2 second RTC sampling error
- */
- set_normalized_timespec(&time,
- newtime + delta.tv_sec,
- (NSEC_PER_SEC >> 1) + delta.tv_nsec);
- do_settimeofday(&time);
+ /* subtract kernel time between rtc_suspend to rtc_resume */
+ time = timespec_sub(time, timespec_sub(newts, oldts));
+ timekeeping_inject_sleeptime(&time);
return 0;
}
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 8d46838..755e1fe 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -524,6 +524,8 @@
goto fail2;
}
+ platform_set_drvdata(pdev, davinci_rtc);
+
davinci_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
&davinci_rtc_ops, THIS_MODULE);
if (IS_ERR(davinci_rtc->rtc)) {
@@ -553,8 +555,6 @@
rtcss_write(davinci_rtc, PRTCSS_RTC_CCTRL_CAEN, PRTCSS_RTC_CCTRL);
- platform_set_drvdata(pdev, davinci_rtc);
-
device_init_wakeup(&pdev->dev, 0);
return 0;
@@ -562,6 +562,7 @@
fail4:
rtc_device_unregister(davinci_rtc->rtc);
fail3:
+ platform_set_drvdata(pdev, NULL);
iounmap(davinci_rtc->base);
fail2:
release_mem_region(davinci_rtc->pbase, davinci_rtc->base_size);
diff --git a/drivers/rtc/rtc-ds1286.c b/drivers/rtc/rtc-ds1286.c
index 60ce696..47e681d 100644
--- a/drivers/rtc/rtc-ds1286.c
+++ b/drivers/rtc/rtc-ds1286.c
@@ -355,6 +355,7 @@
goto out;
}
spin_lock_init(&priv->lock);
+ platform_set_drvdata(pdev, priv);
rtc = rtc_device_register("ds1286", &pdev->dev,
&ds1286_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
@@ -362,7 +363,6 @@
goto out;
}
priv->rtc = rtc;
- platform_set_drvdata(pdev, priv);
return 0;
out:
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 11ae64d..335551d 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -151,6 +151,7 @@
return -ENXIO;
pdev->dev.platform_data = ep93xx_rtc;
+ platform_set_drvdata(pdev, rtc);
rtc = rtc_device_register(pdev->name,
&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
@@ -159,8 +160,6 @@
goto exit;
}
- platform_set_drvdata(pdev, rtc);
-
err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_rtc_sysfs_files);
if (err)
goto fail;
@@ -168,9 +167,9 @@
return 0;
fail:
- platform_set_drvdata(pdev, NULL);
rtc_device_unregister(rtc);
exit:
+ platform_set_drvdata(pdev, NULL);
pdev->dev.platform_data = NULL;
return err;
}
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 69fe664..eda128f 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -783,6 +783,9 @@
goto exit;
}
+ clientdata->features = id->driver_data;
+ i2c_set_clientdata(client, clientdata);
+
rtc = rtc_device_register(client->name, &client->dev,
&m41t80_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
@@ -792,8 +795,6 @@
}
clientdata->rtc = rtc;
- clientdata->features = id->driver_data;
- i2c_set_clientdata(client, clientdata);
/* Make sure HT (Halt Update) bit is cleared */
rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
diff --git a/drivers/rtc/rtc-max8925.c b/drivers/rtc/rtc-max8925.c
index 20494b5e..3bc046f 100644
--- a/drivers/rtc/rtc-max8925.c
+++ b/drivers/rtc/rtc-max8925.c
@@ -258,6 +258,8 @@
}
dev_set_drvdata(&pdev->dev, info);
+ /* XXX - isn't this redundant? */
+ platform_set_drvdata(pdev, info);
info->rtc_dev = rtc_device_register("max8925-rtc", &pdev->dev,
&max8925_rtc_ops, THIS_MODULE);
@@ -267,10 +269,9 @@
goto out_rtc;
}
- platform_set_drvdata(pdev, info);
-
return 0;
out_rtc:
+ platform_set_drvdata(pdev, NULL);
free_irq(chip->irq_base + MAX8925_IRQ_RTC_ALARM0, info);
out_irq:
kfree(info);
diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c
index 3f7bc6b..2e48aa6 100644
--- a/drivers/rtc/rtc-max8998.c
+++ b/drivers/rtc/rtc-max8998.c
@@ -265,6 +265,8 @@
info->rtc = max8998->rtc;
info->irq = max8998->irq_base + MAX8998_IRQ_ALARM0;
+ platform_set_drvdata(pdev, info);
+
info->rtc_dev = rtc_device_register("max8998-rtc", &pdev->dev,
&max8998_rtc_ops, THIS_MODULE);
@@ -274,8 +276,6 @@
goto out_rtc;
}
- platform_set_drvdata(pdev, info);
-
ret = request_threaded_irq(info->irq, NULL, max8998_rtc_alarm_irq, 0,
"rtc-alarm0", info);
@@ -293,6 +293,7 @@
return 0;
out_rtc:
+ platform_set_drvdata(pdev, NULL);
kfree(info);
return ret;
}
diff --git a/drivers/rtc/rtc-mc13xxx.c b/drivers/rtc/rtc-mc13xxx.c
index c5ac037..a1a278b 100644
--- a/drivers/rtc/rtc-mc13xxx.c
+++ b/drivers/rtc/rtc-mc13xxx.c
@@ -349,11 +349,15 @@
if (ret)
goto err_alarm_irq_request;
+ mc13xxx_unlock(mc13xxx);
+
priv->rtc = rtc_device_register(pdev->name,
&pdev->dev, &mc13xxx_rtc_ops, THIS_MODULE);
if (IS_ERR(priv->rtc)) {
ret = PTR_ERR(priv->rtc);
+ mc13xxx_lock(mc13xxx);
+
mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_TODA, priv);
err_alarm_irq_request:
@@ -365,12 +369,12 @@
mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_RTCRST, priv);
err_reset_irq_request:
+ mc13xxx_unlock(mc13xxx);
+
platform_set_drvdata(pdev, NULL);
kfree(priv);
}
- mc13xxx_unlock(mc13xxx);
-
return ret;
}
diff --git a/drivers/rtc/rtc-msm6242.c b/drivers/rtc/rtc-msm6242.c
index 6782062..fcb113c 100644
--- a/drivers/rtc/rtc-msm6242.c
+++ b/drivers/rtc/rtc-msm6242.c
@@ -214,6 +214,7 @@
error = -ENOMEM;
goto out_free_priv;
}
+ platform_set_drvdata(dev, priv);
rtc = rtc_device_register("rtc-msm6242", &dev->dev, &msm6242_rtc_ops,
THIS_MODULE);
@@ -223,10 +224,10 @@
}
priv->rtc = rtc;
- platform_set_drvdata(dev, priv);
return 0;
out_unmap:
+ platform_set_drvdata(dev, NULL);
iounmap(priv->regs);
out_free_priv:
kfree(priv);
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 826ab64..d814417 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -418,14 +418,6 @@
goto exit_put_clk;
}
- rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops,
- THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
- goto exit_put_clk;
- }
-
- pdata->rtc = rtc;
platform_set_drvdata(pdev, pdata);
/* Configure and enable the RTC */
@@ -438,8 +430,19 @@
pdata->irq = -1;
}
+ rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops,
+ THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ goto exit_clr_drvdata;
+ }
+
+ pdata->rtc = rtc;
+
return 0;
+exit_clr_drvdata:
+ platform_set_drvdata(pdev, NULL);
exit_put_clk:
clk_disable(pdata->clk);
clk_put(pdata->clk);
diff --git a/drivers/rtc/rtc-pcap.c b/drivers/rtc/rtc-pcap.c
index a633abc..cd4f198 100644
--- a/drivers/rtc/rtc-pcap.c
+++ b/drivers/rtc/rtc-pcap.c
@@ -151,6 +151,8 @@
pcap_rtc->pcap = dev_get_drvdata(pdev->dev.parent);
+ platform_set_drvdata(pdev, pcap_rtc);
+
pcap_rtc->rtc = rtc_device_register("pcap", &pdev->dev,
&pcap_rtc_ops, THIS_MODULE);
if (IS_ERR(pcap_rtc->rtc)) {
@@ -158,7 +160,6 @@
goto fail_rtc;
}
- platform_set_drvdata(pdev, pcap_rtc);
timer_irq = pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ);
alarm_irq = pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA);
@@ -177,6 +178,7 @@
fail_timer:
rtc_device_unregister(pcap_rtc->rtc);
fail_rtc:
+ platform_set_drvdata(pdev, NULL);
kfree(pcap_rtc);
return err;
}
diff --git a/drivers/rtc/rtc-rp5c01.c b/drivers/rtc/rtc-rp5c01.c
index 694da39..359da6d 100644
--- a/drivers/rtc/rtc-rp5c01.c
+++ b/drivers/rtc/rtc-rp5c01.c
@@ -249,15 +249,15 @@
spin_lock_init(&priv->lock);
+ platform_set_drvdata(dev, priv);
+
rtc = rtc_device_register("rtc-rp5c01", &dev->dev, &rp5c01_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc)) {
error = PTR_ERR(rtc);
goto out_unmap;
}
-
priv->rtc = rtc;
- platform_set_drvdata(dev, priv);
error = sysfs_create_bin_file(&dev->dev.kobj, &priv->nvram_attr);
if (error)
@@ -268,6 +268,7 @@
out_unregister:
rtc_device_unregister(rtc);
out_unmap:
+ platform_set_drvdata(dev, NULL);
iounmap(priv->regs);
out_free_priv:
kfree(priv);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index b3466c4..16512ec 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -46,6 +46,7 @@
static void __iomem *s3c_rtc_base;
static int s3c_rtc_alarmno = NO_IRQ;
static int s3c_rtc_tickno = NO_IRQ;
+static bool wake_en;
static enum s3c_cpu_type s3c_rtc_cpu_type;
static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
@@ -562,8 +563,12 @@
}
s3c_rtc_enable(pdev, 0);
- if (device_may_wakeup(&pdev->dev))
- enable_irq_wake(s3c_rtc_alarmno);
+ if (device_may_wakeup(&pdev->dev) && !wake_en) {
+ if (enable_irq_wake(s3c_rtc_alarmno) == 0)
+ wake_en = true;
+ else
+ dev_err(&pdev->dev, "enable_irq_wake failed\n");
+ }
return 0;
}
@@ -579,8 +584,10 @@
writew(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
}
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(&pdev->dev) && wake_en) {
disable_irq_wake(s3c_rtc_alarmno);
+ wake_en = false;
+ }
return 0;
}
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 475e603..86b6f1c 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1742,11 +1742,20 @@
static inline int _dasd_term_running_cqr(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
+ int rc;
if (list_empty(&device->ccw_queue))
return 0;
cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist);
- return device->discipline->term_IO(cqr);
+ rc = device->discipline->term_IO(cqr);
+ if (!rc)
+ /*
+ * CQR terminated because a more important request is pending.
+ * Undo decreasing of retry counter because this is
+ * not an error case.
+ */
+ cqr->retries++;
+ return rc;
}
int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 29143ed..85dddb1 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -239,7 +239,6 @@
addr_t ip;
int rc;
- kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++;
switch (ext_int_code >> 24) {
case DASD_DIAG_CODE_31BIT:
ip = (addr_t) param32;
@@ -250,6 +249,7 @@
default:
return;
}
+ kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++;
if (!ip) { /* no intparm: unsolicited interrupt */
DBF_EVENT(DBF_NOTICE, "%s", "caught unsolicited "
"interrupt");
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 4b60ede..be55fb2 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -518,6 +518,8 @@
return;
new_incr->rn = rn;
new_incr->standby = standby;
+ if (!standby)
+ new_incr->usecount = 1;
last_rn = 0;
prev = &sclp_mem_list;
list_for_each_entry(incr, &sclp_mem_list, list) {
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 83cea9a55..1b3924c 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -236,7 +236,6 @@
disk->major = tapeblock_major;
disk->first_minor = device->first_minor;
disk->fops = &tapeblock_fops;
- disk->events = DISK_EVENT_MEDIA_CHANGE;
disk->private_data = tape_get_device(device);
disk->queue = blkdat->request_queue;
set_capacity(disk, 0);
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 414427d6..607998f 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -381,10 +381,10 @@
u16 subcode;
u32 param;
- kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++;
subcode = ext_int_code >> 16;
if ((subcode & 0xff00) != VIRTIO_SUBCODE_64)
return;
+ kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++;
/* The LSB might be overloaded, we have to mask it */
vq = (struct virtqueue *)(param64 & ~1UL);
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index da8aa75..f1fa248 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -845,12 +845,10 @@
{
struct chbk * p_ch;
struct net_device *dev;
- struct claw_privbk * privptr;
p_ch = (struct chbk *) data;
dev = (struct net_device *)p_ch->ndev;
CLAW_DBF_TEXT(4, trace, "IRQtask");
- privptr = (struct claw_privbk *)dev->ml_priv;
unpack_read(dev);
clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
CLAW_DBF_TEXT(4, trace, "TskletXt");
@@ -1026,7 +1024,6 @@
struct net_device *dev;
struct claw_privbk *privptr=NULL;
struct sk_buff *pk_skb;
- int rc;
CLAW_DBF_TEXT(4, trace, "claw_wrt");
if (p_ch->claw_state == CLAW_STOP)
@@ -1038,7 +1035,7 @@
!skb_queue_empty(&p_ch->collect_queue)) {
pk_skb = claw_pack_skb(privptr);
while (pk_skb != NULL) {
- rc = claw_hw_tx( pk_skb, dev,1);
+ claw_hw_tx(pk_skb, dev, 1);
if (privptr->write_free_count > 0) {
pk_skb = claw_pack_skb(privptr);
} else
@@ -1322,15 +1319,12 @@
unsigned char *pDataAddress;
struct endccw *pEnd;
struct ccw1 tempCCW;
- struct chbk *p_ch;
struct claw_env *p_env;
- int lock;
struct clawph *pk_head;
struct chbk *ch;
CLAW_DBF_TEXT(4, trace, "hw_tx");
privptr = (struct claw_privbk *)(dev->ml_priv);
- p_ch = (struct chbk *)&privptr->channel[WRITE_CHANNEL];
p_env =privptr->p_env;
claw_free_wrt_buf(dev); /* Clean up free chain if posible */
/* scan the write queue to free any completed write packets */
@@ -1511,12 +1505,6 @@
} /* endif (p_first_ccw!=NULL) */
dev_kfree_skb_any(skb);
- if (linkid==0) {
- lock=LOCK_NO;
- }
- else {
- lock=LOCK_YES;
- }
claw_strt_out_IO(dev );
/* if write free count is zero , set NOBUFFER */
if (privptr->write_free_count==0) {
@@ -2821,15 +2809,11 @@
{
struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
- struct ccwbk*p_first_ccw;
- struct ccwbk*p_last_ccw;
struct ccwbk*p_this_ccw;
struct ccwbk*p_next_ccw;
CLAW_DBF_TEXT(4, trace, "freewrtb");
/* scan the write queue to free any completed write packets */
- p_first_ccw=NULL;
- p_last_ccw=NULL;
p_this_ccw=privptr->p_write_active_first;
while ( (p_this_ccw!=NULL) && (p_this_ccw->header.flag!=CLAW_PENDING))
{
@@ -3072,7 +3056,7 @@
{
struct claw_privbk *priv;
struct net_device *ndev;
- int ret;
+ int ret = 0;
CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
priv = dev_get_drvdata(&cgdev->dev);
@@ -3095,7 +3079,7 @@
}
ccw_device_set_offline(cgdev->cdev[1]);
ccw_device_set_offline(cgdev->cdev[0]);
- return 0;
+ return ret;
}
static void
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index c189296..426787e 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -672,7 +672,6 @@
int ccw_idx;
unsigned long hi;
unsigned long saveflags = 0; /* avoids compiler warning */
- __u16 block_len;
CTCM_PR_DEBUG("Enter %s: %s, cp=%i ch=0x%p id=%s state=%s\n",
__func__, dev->name, smp_processor_id(), ch,
@@ -719,7 +718,6 @@
*/
atomic_inc(&skb->users);
- block_len = skb->len + TH_HEADER_LENGTH + PDU_HEADER_LENGTH;
/*
* IDAL support in CTCM is broken, so we have to
* care about skb's above 2G ourselves.
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index b64881f..da4c747 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -653,7 +653,6 @@
struct net_device *dev = rch->netdev;
struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
- int rc = 0;
struct th_sweep *header;
struct sk_buff *sweep_skb;
struct channel *ch = priv->channel[CTCM_WRITE];
@@ -665,16 +664,14 @@
CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
"%s(%s): sweep_skb allocation ERROR\n",
CTCM_FUNTAIL, rch->id);
- rc = -ENOMEM;
- goto done;
+ goto done;
}
header = kmalloc(sizeof(struct th_sweep), gfp_type());
if (!header) {
dev_kfree_skb_any(sweep_skb);
- rc = -ENOMEM;
- goto done;
+ goto done;
}
header->th.th_seg = 0x00 ;
@@ -1370,8 +1367,7 @@
struct net_device *dev = arg;
struct ctcm_priv *priv;
struct mpc_group *grp;
- int rc = 0;
- struct channel *wch, *rch;
+ struct channel *wch;
BUG_ON(dev == NULL);
CTCM_PR_DEBUG("Enter %s: %s\n", __func__, dev->name);
@@ -1396,7 +1392,6 @@
fsm_deltimer(&priv->restart_timer);
wch = priv->channel[CTCM_WRITE];
- rch = priv->channel[CTCM_READ];
switch (grp->saved_state) {
case MPCG_STATE_RESET:
@@ -1435,7 +1430,7 @@
if (grp->send_qllc_disc == 1) {
grp->send_qllc_disc = 0;
- rc = mpc_send_qllc_discontact(dev);
+ mpc_send_qllc_discontact(dev);
}
/* DO NOT issue DEV_EVENT_STOP directly out of this code */
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 49d1cfc..c3b8064 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1483,7 +1483,6 @@
struct lcs_channel *channel;
struct lcs_buffer *iob;
int buf_idx;
- int rc;
channel = (struct lcs_channel *) data;
LCS_DBF_TEXT_(5, trace, "tlet%s", dev_name(&channel->ccwdev->dev));
@@ -1500,14 +1499,11 @@
channel->buf_idx = buf_idx;
if (channel->state == LCS_CH_STATE_STOPPED)
- // FIXME: what if rc != 0 ??
- rc = lcs_start_channel(channel);
+ lcs_start_channel(channel);
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
if (channel->state == LCS_CH_STATE_SUSPENDED &&
- channel->iob[channel->io_idx].state == LCS_BUF_STATE_READY) {
- // FIXME: what if rc != 0 ??
- rc = __lcs_resume_channel(channel);
- }
+ channel->iob[channel->io_idx].state == LCS_BUF_STATE_READY)
+ __lcs_resume_channel(channel);
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
/* Something happened on the channel. Wake up waiters. */
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index b6a6356..3251333 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1994,8 +1994,6 @@
netiucv_setup_netdevice);
if (!dev)
return NULL;
- if (dev_alloc_name(dev, dev->name) < 0)
- goto out_netdev;
privptr = netdev_priv(dev);
privptr->fsm = init_fsm("netiucvdev", dev_state_names,
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index af3f7b0..55c6aa1 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -407,12 +407,6 @@
int next_buf_to_init;
} __attribute__ ((aligned(256)));
-/* possible types of qeth large_send support */
-enum qeth_large_send_types {
- QETH_LARGE_SEND_NO,
- QETH_LARGE_SEND_TSO,
-};
-
struct qeth_qdio_out_buffer {
struct qdio_buffer *buffer;
atomic_t state;
@@ -637,6 +631,8 @@
__u32 csum_mask;
__u32 tx_csum_mask;
enum qeth_ipa_promisc_modes promisc_mode;
+ __u32 diagass_support;
+ __u32 hwtrap;
};
struct qeth_card_options {
@@ -645,13 +641,11 @@
struct qeth_ipa_info adp; /*Adapter parameters*/
struct qeth_routing_info route6;
struct qeth_ipa_info ipa6;
- enum qeth_checksum_types checksum_type;
int broadcast_mode;
int macaddr_mode;
int fake_broadcast;
int add_hhlen;
int layer2;
- enum qeth_large_send_types large_send;
int performance_stats;
int rx_sg_cb;
enum qeth_ipa_isolation_modes isolation;
@@ -760,6 +754,14 @@
rwlock_t rwlock;
};
+struct qeth_trap_id {
+ __u16 lparnr;
+ char vmname[8];
+ __u8 chpid;
+ __u8 ssid;
+ __u16 devno;
+} __packed;
+
/*some helper functions*/
#define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "")
@@ -794,6 +796,12 @@
list_add_tail(&entry->list, &card->qdio.in_buf_pool.entry_list);
}
+static inline int qeth_is_diagass_supported(struct qeth_card *card,
+ enum qeth_diags_cmds cmd)
+{
+ return card->info.diagass_support & (__u32)cmd;
+}
+
extern struct ccwgroup_driver qeth_l2_ccwgroup_driver;
extern struct ccwgroup_driver qeth_l3_ccwgroup_driver;
const char *qeth_get_cardname_short(struct qeth_card *);
@@ -879,6 +887,8 @@
int qeth_core_ethtool_get_settings(struct net_device *, struct ethtool_cmd *);
int qeth_set_access_ctrl_online(struct qeth_card *card);
int qeth_hdr_chk_and_bounce(struct sk_buff *, int);
+int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action);
+int qeth_query_ipassists(struct qeth_card *, enum qeth_prot_versions prot);
/* exports for OSN */
int qeth_osn_assist(struct net_device *, void *, int);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 85cc531..503678a 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -24,6 +24,7 @@
#include <asm/ebcdic.h>
#include <asm/io.h>
+#include <asm/sysinfo.h>
#include "qeth_core.h"
@@ -349,6 +350,8 @@
card->info.chpid);
netif_carrier_on(card->dev);
card->lan_online = 1;
+ if (card->info.hwtrap)
+ card->info.hwtrap = 2;
qeth_schedule_recovery(card);
return NULL;
case IPA_CMD_MODCCID:
@@ -1039,7 +1042,6 @@
{
card->options.route4.type = NO_ROUTER;
card->options.route6.type = NO_ROUTER;
- card->options.checksum_type = QETH_CHECKSUM_DEFAULT;
card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS;
card->options.macaddr_mode = QETH_TR_MACADDR_NONCANONICAL;
card->options.fake_broadcast = 0;
@@ -2574,6 +2576,142 @@
}
EXPORT_SYMBOL_GPL(qeth_query_setadapterparms);
+static int qeth_query_ipassists_cb(struct qeth_card *card,
+ struct qeth_reply *reply, unsigned long data)
+{
+ struct qeth_ipa_cmd *cmd;
+
+ QETH_DBF_TEXT(SETUP, 2, "qipasscb");
+
+ cmd = (struct qeth_ipa_cmd *) data;
+ if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
+ card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
+ card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
+ } else {
+ card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
+ card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
+ }
+ QETH_DBF_TEXT(SETUP, 2, "suppenbl");
+ QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_supported);
+ QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_enabled);
+ return 0;
+}
+
+int qeth_query_ipassists(struct qeth_card *card, enum qeth_prot_versions prot)
+{
+ int rc;
+ struct qeth_cmd_buffer *iob;
+
+ QETH_DBF_TEXT_(SETUP, 2, "qipassi%i", prot);
+ iob = qeth_get_ipacmd_buffer(card, IPA_CMD_QIPASSIST, prot);
+ rc = qeth_send_ipa_cmd(card, iob, qeth_query_ipassists_cb, NULL);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(qeth_query_ipassists);
+
+static int qeth_query_setdiagass_cb(struct qeth_card *card,
+ struct qeth_reply *reply, unsigned long data)
+{
+ struct qeth_ipa_cmd *cmd;
+ __u16 rc;
+
+ cmd = (struct qeth_ipa_cmd *)data;
+ rc = cmd->hdr.return_code;
+ if (rc)
+ QETH_CARD_TEXT_(card, 2, "diagq:%x", rc);
+ else
+ card->info.diagass_support = cmd->data.diagass.ext;
+ return 0;
+}
+
+static int qeth_query_setdiagass(struct qeth_card *card)
+{
+ struct qeth_cmd_buffer *iob;
+ struct qeth_ipa_cmd *cmd;
+
+ QETH_DBF_TEXT(SETUP, 2, "qdiagass");
+ iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SET_DIAG_ASS, 0);
+ cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+ cmd->data.diagass.subcmd_len = 16;
+ cmd->data.diagass.subcmd = QETH_DIAGS_CMD_QUERY;
+ return qeth_send_ipa_cmd(card, iob, qeth_query_setdiagass_cb, NULL);
+}
+
+static void qeth_get_trap_id(struct qeth_card *card, struct qeth_trap_id *tid)
+{
+ unsigned long info = get_zeroed_page(GFP_KERNEL);
+ struct sysinfo_2_2_2 *info222 = (struct sysinfo_2_2_2 *)info;
+ struct sysinfo_3_2_2 *info322 = (struct sysinfo_3_2_2 *)info;
+ struct ccw_dev_id ccwid;
+ int level, rc;
+
+ tid->chpid = card->info.chpid;
+ ccw_device_get_id(CARD_RDEV(card), &ccwid);
+ tid->ssid = ccwid.ssid;
+ tid->devno = ccwid.devno;
+ if (!info)
+ return;
+
+ rc = stsi(NULL, 0, 0, 0);
+ if (rc == -ENOSYS)
+ level = rc;
+ else
+ level = (((unsigned int) rc) >> 28);
+
+ if ((level >= 2) && (stsi(info222, 2, 2, 2) != -ENOSYS))
+ tid->lparnr = info222->lpar_number;
+
+ if ((level >= 3) && (stsi(info322, 3, 2, 2) != -ENOSYS)) {
+ EBCASC(info322->vm[0].name, sizeof(info322->vm[0].name));
+ memcpy(tid->vmname, info322->vm[0].name, sizeof(tid->vmname));
+ }
+ free_page(info);
+ return;
+}
+
+static int qeth_hw_trap_cb(struct qeth_card *card,
+ struct qeth_reply *reply, unsigned long data)
+{
+ struct qeth_ipa_cmd *cmd;
+ __u16 rc;
+
+ cmd = (struct qeth_ipa_cmd *)data;
+ rc = cmd->hdr.return_code;
+ if (rc)
+ QETH_CARD_TEXT_(card, 2, "trapc:%x", rc);
+ return 0;
+}
+
+int qeth_hw_trap(struct qeth_card *card, enum qeth_diags_trap_action action)
+{
+ struct qeth_cmd_buffer *iob;
+ struct qeth_ipa_cmd *cmd;
+
+ QETH_DBF_TEXT(SETUP, 2, "diagtrap");
+ iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SET_DIAG_ASS, 0);
+ cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+ cmd->data.diagass.subcmd_len = 80;
+ cmd->data.diagass.subcmd = QETH_DIAGS_CMD_TRAP;
+ cmd->data.diagass.type = 1;
+ cmd->data.diagass.action = action;
+ switch (action) {
+ case QETH_DIAGS_TRAP_ARM:
+ cmd->data.diagass.options = 0x0003;
+ cmd->data.diagass.ext = 0x00010000 +
+ sizeof(struct qeth_trap_id);
+ qeth_get_trap_id(card,
+ (struct qeth_trap_id *)cmd->data.diagass.cdata);
+ break;
+ case QETH_DIAGS_TRAP_DISARM:
+ cmd->data.diagass.options = 0x0001;
+ break;
+ case QETH_DIAGS_TRAP_CAPTURE:
+ break;
+ }
+ return qeth_send_ipa_cmd(card, iob, qeth_hw_trap_cb, NULL);
+}
+EXPORT_SYMBOL_GPL(qeth_hw_trap);
+
int qeth_check_qdio_errors(struct qeth_card *card, struct qdio_buffer *buf,
unsigned int qdio_error, const char *dbftext)
{
@@ -3903,6 +4041,7 @@
static struct ccw_driver qeth_ccw_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "qeth",
},
.ids = qeth_ids,
@@ -3984,6 +4123,15 @@
QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc);
goto out;
}
+
+ card->options.ipa4.supported_funcs = 0;
+ card->options.adp.supported_funcs = 0;
+ card->info.diagass_support = 0;
+ qeth_query_ipassists(card, QETH_PROT_IPV4);
+ if (qeth_is_supported(card, IPA_SETADAPTERPARMS))
+ qeth_query_setadapterparms(card);
+ if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST))
+ qeth_query_setdiagass(card);
return 0;
out:
dev_warn(&card->gdev->dev, "The qeth device driver failed to recover "
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 07d5888..e5a9d1c 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -80,14 +80,6 @@
QETH_TR_BROADCAST_LOCAL = 1,
};
-/* these values match CHECKSUM_* in include/linux/skbuff.h */
-enum qeth_checksum_types {
- SW_CHECKSUMMING = 0, /* TODO: set to bit flag used in IPA Command */
- HW_CHECKSUMMING = 1,
- NO_CHECKSUMMING = 2,
-};
-#define QETH_CHECKSUM_DEFAULT SW_CHECKSUMMING
-
/*
* Routing stuff
*/
@@ -456,6 +448,12 @@
QETH_DIAGS_CMD_TRACE_QUERY = 0x0010,
};
+enum qeth_diags_trap_action {
+ QETH_DIAGS_TRAP_ARM = 0x01,
+ QETH_DIAGS_TRAP_DISARM = 0x02,
+ QETH_DIAGS_TRAP_CAPTURE = 0x04,
+};
+
struct qeth_ipacmd_diagass {
__u32 host_tod2;
__u32:32;
@@ -465,7 +463,8 @@
__u8 type;
__u8 action;
__u16 options;
- __u32:32;
+ __u32 ext;
+ __u8 cdata[64];
} __attribute__ ((packed));
/* Header for each IPA command */
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index b5e967c..0a8e86c 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -530,6 +530,66 @@
static DEVICE_ATTR(isolation, 0644, qeth_dev_isolation_show,
qeth_dev_isolation_store);
+static ssize_t qeth_hw_trap_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct qeth_card *card = dev_get_drvdata(dev);
+
+ if (!card)
+ return -EINVAL;
+ if (card->info.hwtrap)
+ return snprintf(buf, 5, "arm\n");
+ else
+ return snprintf(buf, 8, "disarm\n");
+}
+
+static ssize_t qeth_hw_trap_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct qeth_card *card = dev_get_drvdata(dev);
+ int rc = 0;
+ char *tmp, *curtoken;
+ int state = 0;
+ curtoken = (char *)buf;
+
+ if (!card)
+ return -EINVAL;
+
+ mutex_lock(&card->conf_mutex);
+ if (card->state == CARD_STATE_SOFTSETUP || card->state == CARD_STATE_UP)
+ state = 1;
+ tmp = strsep(&curtoken, "\n");
+
+ if (!strcmp(tmp, "arm") && !card->info.hwtrap) {
+ if (state) {
+ if (qeth_is_diagass_supported(card,
+ QETH_DIAGS_CMD_TRAP)) {
+ rc = qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM);
+ if (!rc)
+ card->info.hwtrap = 1;
+ } else
+ rc = -EINVAL;
+ } else
+ card->info.hwtrap = 1;
+ } else if (!strcmp(tmp, "disarm") && card->info.hwtrap) {
+ if (state) {
+ rc = qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
+ if (!rc)
+ card->info.hwtrap = 0;
+ } else
+ card->info.hwtrap = 0;
+ } else if (!strcmp(tmp, "trap") && state && card->info.hwtrap)
+ rc = qeth_hw_trap(card, QETH_DIAGS_TRAP_CAPTURE);
+ else
+ rc = -EINVAL;
+
+ mutex_unlock(&card->conf_mutex);
+ return rc ? rc : count;
+}
+
+static DEVICE_ATTR(hw_trap, 0644, qeth_hw_trap_show,
+ qeth_hw_trap_store);
+
static ssize_t qeth_dev_blkt_show(char *buf, struct qeth_card *card, int value)
{
@@ -653,6 +713,7 @@
&dev_attr_performance_stats.attr,
&dev_attr_layer2.attr,
&dev_attr_isolation.attr,
+ &dev_attr_hw_trap.attr,
NULL,
};
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 6fbaacb..b70b47f 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -420,10 +420,7 @@
case QETH_HEADER_TYPE_LAYER2:
skb->pkt_type = PACKET_HOST;
skb->protocol = eth_type_trans(skb, skb->dev);
- if (card->options.checksum_type == NO_CHECKSUMMING)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- else
- skb->ip_summed = CHECKSUM_NONE;
+ skb->ip_summed = CHECKSUM_NONE;
if (skb->protocol == htons(ETH_P_802_2))
*((__u32 *)skb->cb) = ++card->seqno.pkt_seqno;
len = skb->len;
@@ -879,6 +876,7 @@
INIT_LIST_HEAD(&card->vid_list);
INIT_LIST_HEAD(&card->mc_list);
card->options.layer2 = 1;
+ card->info.hwtrap = 0;
card->discipline.start_poll = qeth_qdio_start_poll;
card->discipline.input_handler = (qdio_handler_t *)
qeth_qdio_input_handler;
@@ -997,6 +995,13 @@
if (card->info.type != QETH_CARD_TYPE_OSN)
qeth_l2_send_setmac(card, &card->dev->dev_addr[0]);
+ if (qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP)) {
+ if (card->info.hwtrap &&
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM))
+ card->info.hwtrap = 0;
+ } else
+ card->info.hwtrap = 0;
+
card->state = CARD_STATE_HARDSETUP;
memset(&card->rx, 0, sizeof(struct qeth_rx));
qeth_print_status_message(card);
@@ -1095,6 +1100,10 @@
if (card->dev && netif_carrier_ok(card->dev))
netif_carrier_off(card->dev);
recover_flag = card->state;
+ if ((!recovery_mode && card->info.hwtrap) || card->info.hwtrap == 2) {
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
+ card->info.hwtrap = 1;
+ }
qeth_l2_stop_card(card, recovery_mode);
rc = ccw_device_set_offline(CARD_DDEV(card));
rc2 = ccw_device_set_offline(CARD_WDEV(card));
@@ -1160,6 +1169,8 @@
static void qeth_l2_shutdown(struct ccwgroup_device *gdev)
{
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+ if ((gdev->state == CCWGROUP_ONLINE) && card->info.hwtrap)
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
qeth_qdio_clear_card(card, 0);
qeth_clear_qdio_buffers(card);
}
@@ -1175,6 +1186,8 @@
if (gdev->state == CCWGROUP_OFFLINE)
return 0;
if (card->state == CARD_STATE_UP) {
+ if (card->info.hwtrap)
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
__qeth_l2_set_offline(card->gdev, 1);
} else
__qeth_l2_set_offline(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h
index e705b27..14a43ae 100644
--- a/drivers/s390/net/qeth_l3.h
+++ b/drivers/s390/net/qeth_l3.h
@@ -62,8 +62,6 @@
int qeth_l3_add_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *);
void qeth_l3_del_rxip(struct qeth_card *card, enum qeth_prot_versions,
const u8 *);
-int qeth_l3_set_large_send(struct qeth_card *, enum qeth_large_send_types);
-int qeth_l3_set_rx_csum(struct qeth_card *, enum qeth_checksum_types);
int qeth_l3_is_addr_covered_by_ipato(struct qeth_card *, struct qeth_ipaddr *);
#endif /* __QETH_L3_H__ */
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 142e5f6..fd69da3 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -43,33 +43,6 @@
static int __qeth_l3_set_online(struct ccwgroup_device *, int);
static int __qeth_l3_set_offline(struct ccwgroup_device *, int);
-int qeth_l3_set_large_send(struct qeth_card *card,
- enum qeth_large_send_types type)
-{
- int rc = 0;
-
- card->options.large_send = type;
- if (card->dev == NULL)
- return 0;
-
- if (card->options.large_send == QETH_LARGE_SEND_TSO) {
- if (qeth_is_supported(card, IPA_OUTBOUND_TSO)) {
- card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
- NETIF_F_IP_CSUM;
- } else {
- card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
- NETIF_F_IP_CSUM);
- card->options.large_send = QETH_LARGE_SEND_NO;
- rc = -EOPNOTSUPP;
- }
- } else {
- card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
- NETIF_F_IP_CSUM);
- card->options.large_send = QETH_LARGE_SEND_NO;
- }
- return rc;
-}
-
static int qeth_l3_isxdigit(char *buf)
{
while (*buf) {
@@ -1304,39 +1277,6 @@
return rc;
}
-static int qeth_l3_query_ipassists_cb(struct qeth_card *card,
- struct qeth_reply *reply, unsigned long data)
-{
- struct qeth_ipa_cmd *cmd;
-
- QETH_DBF_TEXT(SETUP, 2, "qipasscb");
-
- cmd = (struct qeth_ipa_cmd *) data;
- if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
- card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
- card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
- } else {
- card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
- card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
- }
- QETH_DBF_TEXT(SETUP, 2, "suppenbl");
- QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_supported);
- QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_enabled);
- return 0;
-}
-
-static int qeth_l3_query_ipassists(struct qeth_card *card,
- enum qeth_prot_versions prot)
-{
- int rc;
- struct qeth_cmd_buffer *iob;
-
- QETH_DBF_TEXT_(SETUP, 2, "qipassi%i", prot);
- iob = qeth_get_ipacmd_buffer(card, IPA_CMD_QIPASSIST, prot);
- rc = qeth_send_ipa_cmd(card, iob, qeth_l3_query_ipassists_cb, NULL);
- return rc;
-}
-
#ifdef CONFIG_QETH_IPV6
static int qeth_l3_softsetup_ipv6(struct qeth_card *card)
{
@@ -1347,7 +1287,7 @@
if (card->info.type == QETH_CARD_TYPE_IQD)
goto out;
- rc = qeth_l3_query_ipassists(card, QETH_PROT_IPV6);
+ rc = qeth_query_ipassists(card, QETH_PROT_IPV6);
if (rc) {
dev_err(&card->gdev->dev,
"Activating IPv6 support for %s failed\n",
@@ -1472,68 +1412,38 @@
return 0;
}
-int qeth_l3_set_rx_csum(struct qeth_card *card,
- enum qeth_checksum_types csum_type)
+int qeth_l3_set_rx_csum(struct qeth_card *card, int on)
{
int rc = 0;
- if (card->options.checksum_type == HW_CHECKSUMMING) {
- if ((csum_type != HW_CHECKSUMMING) &&
- (card->state != CARD_STATE_DOWN)) {
- rc = qeth_l3_send_simple_setassparms(card,
- IPA_INBOUND_CHECKSUM, IPA_CMD_ASS_STOP, 0);
- if (rc)
- return -EIO;
- }
+ if (on) {
+ rc = qeth_l3_send_checksum_command(card);
+ if (rc)
+ return -EIO;
+ dev_info(&card->gdev->dev,
+ "HW Checksumming (inbound) enabled\n");
} else {
- if (csum_type == HW_CHECKSUMMING) {
- if (card->state != CARD_STATE_DOWN) {
- if (!qeth_is_supported(card,
- IPA_INBOUND_CHECKSUM))
- return -EPERM;
- rc = qeth_l3_send_checksum_command(card);
- if (rc)
- return -EIO;
- }
- }
+ rc = qeth_l3_send_simple_setassparms(card,
+ IPA_INBOUND_CHECKSUM, IPA_CMD_ASS_STOP, 0);
+ if (rc)
+ return -EIO;
}
- card->options.checksum_type = csum_type;
- return rc;
+
+ return 0;
}
static int qeth_l3_start_ipa_checksum(struct qeth_card *card)
{
- int rc = 0;
-
QETH_CARD_TEXT(card, 3, "strtcsum");
- if (card->options.checksum_type == NO_CHECKSUMMING) {
- dev_info(&card->gdev->dev,
- "Using no checksumming on %s.\n",
- QETH_CARD_IFNAME(card));
- return 0;
+ if (card->dev->features & NETIF_F_RXCSUM) {
+ rtnl_lock();
+ /* force set_features call */
+ card->dev->features &= ~NETIF_F_RXCSUM;
+ netdev_update_features(card->dev);
+ rtnl_unlock();
}
- if (card->options.checksum_type == SW_CHECKSUMMING) {
- dev_info(&card->gdev->dev,
- "Using SW checksumming on %s.\n",
- QETH_CARD_IFNAME(card));
- return 0;
- }
- if (!qeth_is_supported(card, IPA_INBOUND_CHECKSUM)) {
- dev_info(&card->gdev->dev,
- "Inbound HW Checksumming not "
- "supported on %s,\ncontinuing "
- "using Inbound SW Checksumming\n",
- QETH_CARD_IFNAME(card));
- card->options.checksum_type = SW_CHECKSUMMING;
- return 0;
- }
- rc = qeth_l3_send_checksum_command(card);
- if (!rc)
- dev_info(&card->gdev->dev,
- "HW Checksumming (inbound) enabled\n");
-
- return rc;
+ return 0;
}
static int qeth_l3_start_ipa_tx_checksum(struct qeth_card *card)
@@ -1580,10 +1490,8 @@
dev_info(&card->gdev->dev,
"Outbound TSO enabled\n");
}
- if (rc && (card->options.large_send == QETH_LARGE_SEND_TSO)) {
- card->options.large_send = QETH_LARGE_SEND_NO;
- card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
- }
+ if (rc)
+ card->dev->features &= ~NETIF_F_TSO;
return rc;
}
@@ -2064,14 +1972,7 @@
is_vlan = 1;
}
- switch (card->options.checksum_type) {
- case SW_CHECKSUMMING:
- skb->ip_summed = CHECKSUM_NONE;
- break;
- case NO_CHECKSUMMING:
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- break;
- case HW_CHECKSUMMING:
+ if (card->dev->features & NETIF_F_RXCSUM) {
if ((hdr->hdr.l3.ext_flags &
(QETH_HDR_EXT_CSUM_HDR_REQ |
QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
@@ -2080,7 +1981,8 @@
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
- }
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
return is_vlan;
}
@@ -3024,7 +2926,7 @@
struct qeth_qdio_out_q *queue = card->qdio.out_qs
[qeth_get_priority_queue(card, skb, ipv, cast_type)];
int tx_bytes = skb->len;
- enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
+ bool large_send;
int data_offset = -1;
int nr_frags;
@@ -3046,8 +2948,7 @@
card->perf_stats.outbound_start_time = qeth_get_micros();
}
- if (skb_is_gso(skb))
- large_send = card->options.large_send;
+ large_send = skb_is_gso(skb);
if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
(skb_shinfo(skb)->nr_frags == 0)) {
@@ -3096,7 +2997,7 @@
/* fix hardware limitation: as long as we do not have sbal
* chaining we can not send long frag lists
*/
- if (large_send == QETH_LARGE_SEND_TSO) {
+ if (large_send) {
if (qeth_l3_tso_elements(new_skb) + 1 > 16) {
if (skb_linearize(new_skb))
goto tx_drop;
@@ -3105,8 +3006,7 @@
}
}
- if ((large_send == QETH_LARGE_SEND_TSO) &&
- (cast_type == RTN_UNSPEC)) {
+ if (large_send && (cast_type == RTN_UNSPEC)) {
hdr = (struct qeth_hdr *)skb_push(new_skb,
sizeof(struct qeth_hdr_tso));
memset(hdr, 0, sizeof(struct qeth_hdr_tso));
@@ -3141,7 +3041,7 @@
if (card->info.type != QETH_CARD_TYPE_IQD) {
int len;
- if (large_send == QETH_LARGE_SEND_TSO)
+ if (large_send)
len = ((unsigned long)tcp_hdr(new_skb) +
tcp_hdr(new_skb)->doff * 4) -
(unsigned long)new_skb->data;
@@ -3162,7 +3062,7 @@
if (new_skb != skb)
dev_kfree_skb_any(skb);
if (card->options.performance_stats) {
- if (large_send != QETH_LARGE_SEND_NO) {
+ if (large_send) {
card->perf_stats.large_send_bytes += tx_bytes;
card->perf_stats.large_send_cnt++;
}
@@ -3248,65 +3148,42 @@
return 0;
}
-static u32 qeth_l3_ethtool_get_rx_csum(struct net_device *dev)
+static u32 qeth_l3_fix_features(struct net_device *dev, u32 features)
{
struct qeth_card *card = dev->ml_priv;
- return (card->options.checksum_type == HW_CHECKSUMMING);
+ if (!qeth_is_supported(card, IPA_OUTBOUND_CHECKSUM))
+ features &= ~NETIF_F_IP_CSUM;
+ if (!qeth_is_supported(card, IPA_OUTBOUND_TSO))
+ features &= ~NETIF_F_TSO;
+ if (!qeth_is_supported(card, IPA_INBOUND_CHECKSUM))
+ features &= ~NETIF_F_RXCSUM;
+
+ return features;
}
-static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+static int qeth_l3_set_features(struct net_device *dev, u32 features)
{
struct qeth_card *card = dev->ml_priv;
- enum qeth_checksum_types csum_type;
+ u32 changed = dev->features ^ features;
+ int err;
- if (data)
- csum_type = HW_CHECKSUMMING;
- else
- csum_type = SW_CHECKSUMMING;
+ if (!(changed & NETIF_F_RXCSUM))
+ return 0;
- return qeth_l3_set_rx_csum(card, csum_type);
-}
+ if (card->state == CARD_STATE_DOWN ||
+ card->state == CARD_STATE_RECOVER)
+ return 0;
-static int qeth_l3_ethtool_set_tso(struct net_device *dev, u32 data)
-{
- struct qeth_card *card = dev->ml_priv;
- int rc = 0;
+ err = qeth_l3_set_rx_csum(card, features & NETIF_F_RXCSUM);
+ if (err)
+ dev->features = features ^ NETIF_F_RXCSUM;
- if (data) {
- rc = qeth_l3_set_large_send(card, QETH_LARGE_SEND_TSO);
- } else {
- dev->features &= ~NETIF_F_TSO;
- card->options.large_send = QETH_LARGE_SEND_NO;
- }
- return rc;
-}
-
-static int qeth_l3_ethtool_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct qeth_card *card = dev->ml_priv;
-
- if (data) {
- if (qeth_is_supported(card, IPA_OUTBOUND_CHECKSUM))
- dev->features |= NETIF_F_IP_CSUM;
- else
- return -EPERM;
- } else
- dev->features &= ~NETIF_F_IP_CSUM;
-
- return 0;
+ return err;
}
static const struct ethtool_ops qeth_l3_ethtool_ops = {
.get_link = ethtool_op_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = qeth_l3_ethtool_set_tx_csum,
- .get_rx_csum = qeth_l3_ethtool_get_rx_csum,
- .set_rx_csum = qeth_l3_ethtool_set_rx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = qeth_l3_ethtool_set_tso,
.get_strings = qeth_core_get_strings,
.get_ethtool_stats = qeth_core_get_ethtool_stats,
.get_sset_count = qeth_core_get_sset_count,
@@ -3347,6 +3224,8 @@
.ndo_set_multicast_list = qeth_l3_set_multicast_list,
.ndo_do_ioctl = qeth_l3_do_ioctl,
.ndo_change_mtu = qeth_change_mtu,
+ .ndo_fix_features = qeth_l3_fix_features,
+ .ndo_set_features = qeth_l3_set_features,
.ndo_vlan_rx_register = qeth_l3_vlan_rx_register,
.ndo_vlan_rx_add_vid = qeth_l3_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qeth_l3_vlan_rx_kill_vid,
@@ -3362,6 +3241,8 @@
.ndo_set_multicast_list = qeth_l3_set_multicast_list,
.ndo_do_ioctl = qeth_l3_do_ioctl,
.ndo_change_mtu = qeth_change_mtu,
+ .ndo_fix_features = qeth_l3_fix_features,
+ .ndo_set_features = qeth_l3_set_features,
.ndo_vlan_rx_register = qeth_l3_vlan_rx_register,
.ndo_vlan_rx_add_vid = qeth_l3_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qeth_l3_vlan_rx_kill_vid,
@@ -3392,8 +3273,12 @@
if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD))
card->dev->dev_id = card->info.unique_id &
0xffff;
- if (!card->info.guestlan)
- card->dev->features |= NETIF_F_GRO;
+ if (!card->info.guestlan) {
+ card->dev->hw_features = NETIF_F_SG |
+ NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
+ NETIF_F_TSO;
+ card->dev->features = NETIF_F_RXCSUM;
+ }
}
} else if (card->info.type == QETH_CARD_TYPE_IQD) {
card->dev = alloc_netdev(0, "hsi%d", ether_setup);
@@ -3426,15 +3311,13 @@
qeth_l3_create_device_attributes(&gdev->dev);
card->options.layer2 = 0;
+ card->info.hwtrap = 0;
card->discipline.start_poll = qeth_qdio_start_poll;
card->discipline.input_handler = (qdio_handler_t *)
qeth_qdio_input_handler;
card->discipline.output_handler = (qdio_handler_t *)
qeth_qdio_output_handler;
card->discipline.recover = qeth_l3_recover;
- if ((card->info.type == QETH_CARD_TYPE_OSD) ||
- (card->info.type == QETH_CARD_TYPE_OSX))
- card->options.checksum_type = HW_CHECKSUMMING;
return 0;
}
@@ -3480,13 +3363,18 @@
goto out_remove;
}
- qeth_l3_query_ipassists(card, QETH_PROT_IPV4);
-
if (!card->dev && qeth_l3_setup_netdev(card)) {
rc = -ENODEV;
goto out_remove;
}
+ if (qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP)) {
+ if (card->info.hwtrap &&
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM))
+ card->info.hwtrap = 0;
+ } else
+ card->info.hwtrap = 0;
+
card->state = CARD_STATE_HARDSETUP;
memset(&card->rx, 0, sizeof(struct qeth_rx));
qeth_print_status_message(card);
@@ -3516,7 +3404,6 @@
rc = qeth_l3_start_ipassists(card);
if (rc)
QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc);
- qeth_l3_set_large_send(card, card->options.large_send);
rc = qeth_l3_setrouting_v4(card);
if (rc)
QETH_DBF_TEXT_(SETUP, 2, "4err%d", rc);
@@ -3589,6 +3476,10 @@
if (card->dev && netif_carrier_ok(card->dev))
netif_carrier_off(card->dev);
recover_flag = card->state;
+ if ((!recovery_mode && card->info.hwtrap) || card->info.hwtrap == 2) {
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
+ card->info.hwtrap = 1;
+ }
qeth_l3_stop_card(card, recovery_mode);
rc = ccw_device_set_offline(CARD_DDEV(card));
rc2 = ccw_device_set_offline(CARD_WDEV(card));
@@ -3644,6 +3535,8 @@
static void qeth_l3_shutdown(struct ccwgroup_device *gdev)
{
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+ if ((gdev->state == CCWGROUP_ONLINE) && card->info.hwtrap)
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
qeth_qdio_clear_card(card, 0);
qeth_clear_qdio_buffers(card);
}
@@ -3659,6 +3552,8 @@
if (gdev->state == CCWGROUP_OFFLINE)
return 0;
if (card->state == CARD_STATE_UP) {
+ if (card->info.hwtrap)
+ qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
__qeth_l3_set_offline(card->gdev, 1);
} else
__qeth_l3_set_offline(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 67cfa68d..cd99210 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -15,16 +15,6 @@
#define QETH_DEVICE_ATTR(_id, _name, _mode, _show, _store) \
struct device_attribute dev_attr_##_id = __ATTR(_name, _mode, _show, _store)
-static const char *qeth_l3_get_checksum_str(struct qeth_card *card)
-{
- if (card->options.checksum_type == SW_CHECKSUMMING)
- return "sw";
- else if (card->options.checksum_type == HW_CHECKSUMMING)
- return "hw";
- else
- return "no";
-}
-
static ssize_t qeth_l3_dev_route_show(struct qeth_card *card,
struct qeth_routing_info *route, char *buf)
{
@@ -295,51 +285,6 @@
static DEVICE_ATTR(canonical_macaddr, 0644, qeth_l3_dev_canonical_macaddr_show,
qeth_l3_dev_canonical_macaddr_store);
-static ssize_t qeth_l3_dev_checksum_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct qeth_card *card = dev_get_drvdata(dev);
-
- if (!card)
- return -EINVAL;
-
- return sprintf(buf, "%s checksumming\n",
- qeth_l3_get_checksum_str(card));
-}
-
-static ssize_t qeth_l3_dev_checksum_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct qeth_card *card = dev_get_drvdata(dev);
- enum qeth_checksum_types csum_type;
- char *tmp;
- int rc = 0;
-
- if (!card)
- return -EINVAL;
-
- mutex_lock(&card->conf_mutex);
- tmp = strsep((char **) &buf, "\n");
- if (!strcmp(tmp, "sw_checksumming"))
- csum_type = SW_CHECKSUMMING;
- else if (!strcmp(tmp, "hw_checksumming"))
- csum_type = HW_CHECKSUMMING;
- else if (!strcmp(tmp, "no_checksumming"))
- csum_type = NO_CHECKSUMMING;
- else {
- rc = -EINVAL;
- goto out;
- }
-
- rc = qeth_l3_set_rx_csum(card, csum_type);
-out:
- mutex_unlock(&card->conf_mutex);
- return rc ? rc : count;
-}
-
-static DEVICE_ATTR(checksumming, 0644, qeth_l3_dev_checksum_show,
- qeth_l3_dev_checksum_store);
-
static ssize_t qeth_l3_dev_sniffer_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -402,61 +347,13 @@
static DEVICE_ATTR(sniffer, 0644, qeth_l3_dev_sniffer_show,
qeth_l3_dev_sniffer_store);
-static ssize_t qeth_l3_dev_large_send_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct qeth_card *card = dev_get_drvdata(dev);
-
- if (!card)
- return -EINVAL;
-
- switch (card->options.large_send) {
- case QETH_LARGE_SEND_NO:
- return sprintf(buf, "%s\n", "no");
- case QETH_LARGE_SEND_TSO:
- return sprintf(buf, "%s\n", "TSO");
- default:
- return sprintf(buf, "%s\n", "N/A");
- }
-}
-
-static ssize_t qeth_l3_dev_large_send_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct qeth_card *card = dev_get_drvdata(dev);
- enum qeth_large_send_types type;
- int rc = 0;
- char *tmp;
-
- if (!card)
- return -EINVAL;
- tmp = strsep((char **) &buf, "\n");
- if (!strcmp(tmp, "no"))
- type = QETH_LARGE_SEND_NO;
- else if (!strcmp(tmp, "TSO"))
- type = QETH_LARGE_SEND_TSO;
- else
- return -EINVAL;
-
- mutex_lock(&card->conf_mutex);
- if (card->options.large_send != type)
- rc = qeth_l3_set_large_send(card, type);
- mutex_unlock(&card->conf_mutex);
- return rc ? rc : count;
-}
-
-static DEVICE_ATTR(large_send, 0644, qeth_l3_dev_large_send_show,
- qeth_l3_dev_large_send_store);
-
static struct attribute *qeth_l3_device_attrs[] = {
&dev_attr_route4.attr,
&dev_attr_route6.attr,
&dev_attr_fake_broadcast.attr,
&dev_attr_broadcast_mode.attr,
&dev_attr_canonical_macaddr.attr,
- &dev_attr_checksumming.attr,
&dev_attr_sniffer.attr,
- &dev_attr_large_send.attr,
NULL,
};
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index da7b988..f980600 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -75,8 +75,10 @@
MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/16xx/1880) SATA/SAS RAID Host Bus Adapter");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(ARCMSR_DRIVER_VERSION);
-static int sleeptime = 10;
-static int retrycount = 12;
+
+#define ARCMSR_SLEEPTIME 10
+#define ARCMSR_RETRYCOUNT 12
+
wait_queue_head_t wait_q;
static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb,
struct scsi_cmnd *cmd);
@@ -171,24 +173,6 @@
****************************************************************************
****************************************************************************
*/
-int arcmsr_sleep_for_bus_reset(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *shost = NULL;
- int i, isleep;
- shost = cmd->device->host;
- isleep = sleeptime / 10;
- if (isleep > 0) {
- for (i = 0; i < isleep; i++) {
- msleep(10000);
- }
- }
-
- isleep = sleeptime % 10;
- if (isleep > 0) {
- msleep(isleep*1000);
- }
- return 0;
-}
static void arcmsr_free_hbb_mu(struct AdapterControlBlock *acb)
{
@@ -323,66 +307,64 @@
default: acb->adapter_type = ACB_ADAPTER_TYPE_A;
}
-}
+}
static uint8_t arcmsr_hba_wait_msgint_ready(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
- uint32_t Index;
- uint8_t Retries = 0x00;
- do {
- for (Index = 0; Index < 100; Index++) {
- if (readl(®->outbound_intstatus) &
- ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
- writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT,
- ®->outbound_intstatus);
- return true;
- }
- msleep(10);
- }/*max 1 seconds*/
+ int i;
- } while (Retries++ < 20);/*max 20 sec*/
+ for (i = 0; i < 2000; i++) {
+ if (readl(®->outbound_intstatus) &
+ ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
+ writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT,
+ ®->outbound_intstatus);
+ return true;
+ }
+ msleep(10);
+ } /* max 20 seconds */
+
return false;
}
static uint8_t arcmsr_hbb_wait_msgint_ready(struct AdapterControlBlock *acb)
{
struct MessageUnit_B *reg = acb->pmuB;
- uint32_t Index;
- uint8_t Retries = 0x00;
- do {
- for (Index = 0; Index < 100; Index++) {
- if (readl(reg->iop2drv_doorbell)
- & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
- writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN
- , reg->iop2drv_doorbell);
- writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
- return true;
- }
- msleep(10);
- }/*max 1 seconds*/
+ int i;
- } while (Retries++ < 20);/*max 20 sec*/
+ for (i = 0; i < 2000; i++) {
+ if (readl(reg->iop2drv_doorbell)
+ & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
+ writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN,
+ reg->iop2drv_doorbell);
+ writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT,
+ reg->drv2iop_doorbell);
+ return true;
+ }
+ msleep(10);
+ } /* max 20 seconds */
+
return false;
}
static uint8_t arcmsr_hbc_wait_msgint_ready(struct AdapterControlBlock *pACB)
{
struct MessageUnit_C *phbcmu = (struct MessageUnit_C *)pACB->pmuC;
- unsigned char Retries = 0x00;
- uint32_t Index;
- do {
- for (Index = 0; Index < 100; Index++) {
- if (readl(&phbcmu->outbound_doorbell) & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE) {
- writel(ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR, &phbcmu->outbound_doorbell_clear);/*clear interrupt*/
- return true;
- }
- /* one us delay */
- msleep(10);
- } /*max 1 seconds*/
- } while (Retries++ < 20); /*max 20 sec*/
+ int i;
+
+ for (i = 0; i < 2000; i++) {
+ if (readl(&phbcmu->outbound_doorbell)
+ & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE) {
+ writel(ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR,
+ &phbcmu->outbound_doorbell_clear); /*clear interrupt*/
+ return true;
+ }
+ msleep(10);
+ } /* max 20 seconds */
+
return false;
}
+
static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
@@ -459,10 +441,11 @@
struct CommandControlBlock *ccb_tmp;
int i = 0, j = 0;
dma_addr_t cdb_phyaddr;
- unsigned long roundup_ccbsize = 0, offset;
+ unsigned long roundup_ccbsize;
unsigned long max_xfer_len;
unsigned long max_sg_entrys;
uint32_t firm_config_version;
+
for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
acb->devstate[i][j] = ARECA_RAID_GONE;
@@ -472,23 +455,20 @@
firm_config_version = acb->firm_cfg_version;
if((firm_config_version & 0xFF) >= 3){
max_xfer_len = (ARCMSR_CDB_SG_PAGE_LENGTH << ((firm_config_version >> 8) & 0xFF)) * 1024;/* max 4M byte */
- max_sg_entrys = (max_xfer_len/4096);
+ max_sg_entrys = (max_xfer_len/4096);
}
acb->host->max_sectors = max_xfer_len/512;
acb->host->sg_tablesize = max_sg_entrys;
roundup_ccbsize = roundup(sizeof(struct CommandControlBlock) + (max_sg_entrys - 1) * sizeof(struct SG64ENTRY), 32);
- acb->uncache_size = roundup_ccbsize * ARCMSR_MAX_FREECCB_NUM + 32;
+ acb->uncache_size = roundup_ccbsize * ARCMSR_MAX_FREECCB_NUM;
dma_coherent = dma_alloc_coherent(&pdev->dev, acb->uncache_size, &dma_coherent_handle, GFP_KERNEL);
if(!dma_coherent){
- printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error\n", acb->host->host_no);
return -ENOMEM;
}
acb->dma_coherent = dma_coherent;
acb->dma_coherent_handle = dma_coherent_handle;
memset(dma_coherent, 0, acb->uncache_size);
- offset = roundup((unsigned long)dma_coherent, 32) - (unsigned long)dma_coherent;
- dma_coherent_handle = dma_coherent_handle + offset;
- dma_coherent = (struct CommandControlBlock *)dma_coherent + offset;
ccb_tmp = dma_coherent;
acb->vir2phy_offset = (unsigned long)dma_coherent - (unsigned long)dma_coherent_handle;
for(i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++){
@@ -2602,12 +2582,8 @@
if (cdb_phyaddr_hi32 != 0) {
struct MessageUnit_C *reg = (struct MessageUnit_C *)acb->pmuC;
- if (cdb_phyaddr_hi32 != 0) {
- unsigned char Retries = 0x00;
- do {
- printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x \n", acb->adapter_index, cdb_phyaddr_hi32);
- } while (Retries++ < 100);
- }
+ printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x\n",
+ acb->adapter_index, cdb_phyaddr_hi32);
writel(ARCMSR_SIGNATURE_SET_CONFIG, ®->msgcode_rwbuffer[0]);
writel(cdb_phyaddr_hi32, ®->msgcode_rwbuffer[1]);
writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, ®->inbound_msgaddr0);
@@ -2955,12 +2931,12 @@
arcmsr_hardware_reset(acb);
acb->acb_flags &= ~ACB_F_IOP_INITED;
sleep_again:
- arcmsr_sleep_for_bus_reset(cmd);
+ ssleep(ARCMSR_SLEEPTIME);
if ((readl(®->outbound_msgaddr1) & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK) == 0) {
- printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d \n", acb->host->host_no, retry_count);
- if (retry_count > retrycount) {
+ printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d\n", acb->host->host_no, retry_count);
+ if (retry_count > ARCMSR_RETRYCOUNT) {
acb->fw_flag = FW_DEADLOCK;
- printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!! \n", acb->host->host_no);
+ printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!!\n", acb->host->host_no);
return FAILED;
}
retry_count++;
@@ -3025,12 +3001,12 @@
arcmsr_hardware_reset(acb);
acb->acb_flags &= ~ACB_F_IOP_INITED;
sleep:
- arcmsr_sleep_for_bus_reset(cmd);
+ ssleep(ARCMSR_SLEEPTIME);
if ((readl(®->host_diagnostic) & 0x04) != 0) {
- printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d \n", acb->host->host_no, retry_count);
- if (retry_count > retrycount) {
+ printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d\n", acb->host->host_no, retry_count);
+ if (retry_count > ARCMSR_RETRYCOUNT) {
acb->fw_flag = FW_DEADLOCK;
- printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!! \n", acb->host->host_no);
+ printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!!\n", acb->host->host_no);
return FAILED;
}
retry_count++;
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index 1cb8a5e..1d7b976 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -8,11 +8,11 @@
* Public License is included in this distribution in the file called COPYING.
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#ifndef BEISCSI_H
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index ad24636..b8a82f2 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -8,11 +8,11 @@
* Public License is included in this distribution in the file called COPYING.
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#include "be.h"
@@ -458,6 +458,7 @@
req_hdr->opcode = opcode;
req_hdr->subsystem = subsystem;
req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+ req_hdr->timeout = 120;
}
static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index fbd1dc2..497eb29 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -8,11 +8,11 @@
* Public License is included in this distribution in the file called COPYING.
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#ifndef BEISCSI_CMDS_H
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 868cc55..3cad106 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#include <scsi/libiscsi.h>
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index 9c53279..ff60b7f 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#ifndef _BE_ISCSI_
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 24e20ba..cea9b27 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -7,16 +7,16 @@
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
+
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/slab.h>
@@ -420,7 +420,8 @@
return 0;
free_kset:
- iscsi_boot_destroy_kset(phba->boot_kset);
+ if (phba->boot_kset)
+ iscsi_boot_destroy_kset(phba->boot_kset);
return -ENOMEM;
}
@@ -3464,23 +3465,23 @@
addr = (u8 __iomem *) ((u8 __iomem *) ctrl->pcicfg +
PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
reg = ioread32(addr);
- SE_DEBUG(DBG_LVL_8, "reg =x%08x\n", reg);
enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
if (!enabled) {
reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
SE_DEBUG(DBG_LVL_8, "reg =x%08x addr=%p\n", reg, addr);
iowrite32(reg, addr);
- if (!phba->msix_enabled) {
- eq = &phwi_context->be_eq[0].q;
+ }
+
+ if (!phba->msix_enabled) {
+ eq = &phwi_context->be_eq[0].q;
+ SE_DEBUG(DBG_LVL_8, "eq->id=%d\n", eq->id);
+ hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+ } else {
+ for (i = 0; i <= phba->num_cpus; i++) {
+ eq = &phwi_context->be_eq[i].q;
SE_DEBUG(DBG_LVL_8, "eq->id=%d\n", eq->id);
hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
- } else {
- for (i = 0; i <= phba->num_cpus; i++) {
- eq = &phwi_context->be_eq[i].q;
- SE_DEBUG(DBG_LVL_8, "eq->id=%d\n", eq->id);
- hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
- }
}
}
}
@@ -4019,12 +4020,17 @@
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_NOOP_OUT:
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- INI_RD_CMD);
- if (task->hdr->ttt == ISCSI_RESERVED_TAG)
+ if (task->hdr->ttt != ISCSI_RESERVED_TAG) {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ TGT_DM_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt,
+ pwrb, 0);
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
- else
+ } else {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_RD_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1);
+ }
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_TEXT:
@@ -4144,10 +4150,11 @@
phba->ctrl.mbox_mem_alloced.size,
phba->ctrl.mbox_mem_alloced.va,
phba->ctrl.mbox_mem_alloced.dma);
+ if (phba->boot_kset)
+ iscsi_boot_destroy_kset(phba->boot_kset);
iscsi_host_remove(phba->shost);
pci_dev_put(phba->pcidev);
iscsi_host_free(phba->shost);
- iscsi_boot_destroy_kset(phba->boot_kset);
}
static void beiscsi_msix_enable(struct beiscsi_hba *phba)
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 90eb74f..081c171a 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#ifndef _BEISCSI_MAIN_
@@ -35,7 +34,7 @@
#include "be.h"
#define DRV_NAME "be2iscsi"
-#define BUILD_STR "2.0.549.0"
+#define BUILD_STR "2.103.298.0"
#define BE_NAME "ServerEngines BladeEngine2" \
"Linux iSCSI Driver version" BUILD_STR
#define DRV_DESC BE_NAME " " "Driver"
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 877324f..44762cf 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#include "be_mgmt.h"
@@ -203,8 +202,8 @@
OPCODE_COMMON_ISCSI_CLEANUP, sizeof(*req));
req->chute = chute;
- req->hdr_ring_id = 0;
- req->data_ring_id = 0;
+ req->hdr_ring_id = cpu_to_le16(HWI_GET_DEF_HDRQ_ID(phba));
+ req->data_ring_id = cpu_to_le16(HWI_GET_DEF_BUFQ_ID(phba));
status = be_mcc_notify_wait(phba);
if (status)
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index b9acedf..0842882 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
*
* Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
*
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
*/
#ifndef _BEISCSI_MGMT_
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 0fd510a..59b5e9b 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -57,9 +57,19 @@
int bfa_debugfs_enable = 1;
int msix_disable_cb = 0, msix_disable_ct = 0;
+/* Firmware releated */
u32 bfi_image_ct_fc_size, bfi_image_ct_cna_size, bfi_image_cb_fc_size;
u32 *bfi_image_ct_fc, *bfi_image_ct_cna, *bfi_image_cb_fc;
+#define BFAD_FW_FILE_CT_FC "ctfw_fc.bin"
+#define BFAD_FW_FILE_CT_CNA "ctfw_cna.bin"
+#define BFAD_FW_FILE_CB_FC "cbfw_fc.bin"
+
+static u32 *bfad_load_fwimg(struct pci_dev *pdev);
+static void bfad_free_fwimg(void);
+static void bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+ u32 *bfi_image_size, char *fw_name);
+
static const char *msix_name_ct[] = {
"cpe0", "cpe1", "cpe2", "cpe3",
"rme0", "rme1", "rme2", "rme3",
@@ -222,6 +232,9 @@
if ((bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
bfa_sm_send_event(bfad, BFAD_E_INIT_SUCCESS);
} else {
+ printk(KERN_WARNING
+ "bfa %s: bfa init failed\n",
+ bfad->pci_name);
bfad->bfad_flags |= BFAD_HAL_INIT_FAIL;
bfa_sm_send_event(bfad, BFAD_E_INIT_FAILED);
}
@@ -991,10 +1004,6 @@
bfad->pport.roles |= BFA_LPORT_ROLE_FCP_IM;
}
- /* Setup the debugfs node for this scsi_host */
- if (bfa_debugfs_enable)
- bfad_debugfs_init(&bfad->pport);
-
bfad->bfad_flags |= BFAD_CFG_PPORT_DONE;
out:
@@ -1004,10 +1013,6 @@
void
bfad_uncfg_pport(struct bfad_s *bfad)
{
- /* Remove the debugfs node for this scsi_host */
- kfree(bfad->regdata);
- bfad_debugfs_exit(&bfad->pport);
-
if ((supported_fc4s & BFA_LPORT_ROLE_FCP_IM) &&
(bfad->pport.roles & BFA_LPORT_ROLE_FCP_IM)) {
bfad_im_scsi_host_free(bfad, bfad->pport.im_port);
@@ -1389,6 +1394,10 @@
bfad->pport.bfad = bfad;
INIT_LIST_HEAD(&bfad->pbc_vport_list);
+ /* Setup the debugfs node for this bfad */
+ if (bfa_debugfs_enable)
+ bfad_debugfs_init(&bfad->pport);
+
retval = bfad_drv_init(bfad);
if (retval != BFA_STATUS_OK)
goto out_drv_init_failure;
@@ -1404,6 +1413,9 @@
bfa_detach(&bfad->bfa);
bfad_hal_mem_release(bfad);
out_drv_init_failure:
+ /* Remove the debugfs node for this bfad */
+ kfree(bfad->regdata);
+ bfad_debugfs_exit(&bfad->pport);
mutex_lock(&bfad_mutex);
bfad_inst--;
list_del(&bfad->list_entry);
@@ -1445,6 +1457,10 @@
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
bfad_hal_mem_release(bfad);
+ /* Remove the debugfs node for this bfad */
+ kfree(bfad->regdata);
+ bfad_debugfs_exit(&bfad->pport);
+
/* Cleaning the BFAD instance */
mutex_lock(&bfad_mutex);
bfad_inst--;
@@ -1550,7 +1566,7 @@
}
/* Firmware handling */
-u32 *
+static void
bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
u32 *bfi_image_size, char *fw_name)
{
@@ -1558,27 +1574,25 @@
if (request_firmware(&fw, fw_name, &pdev->dev)) {
printk(KERN_ALERT "Can't locate firmware %s\n", fw_name);
- goto error;
+ *bfi_image = NULL;
+ goto out;
}
*bfi_image = vmalloc(fw->size);
if (NULL == *bfi_image) {
printk(KERN_ALERT "Fail to allocate buffer for fw image "
"size=%x!\n", (u32) fw->size);
- goto error;
+ goto out;
}
memcpy(*bfi_image, fw->data, fw->size);
*bfi_image_size = fw->size/sizeof(u32);
-
- return *bfi_image;
-
-error:
- return NULL;
+out:
+ release_firmware(fw);
}
-u32 *
-bfad_get_firmware_buf(struct pci_dev *pdev)
+static u32 *
+bfad_load_fwimg(struct pci_dev *pdev)
{
if (pdev->device == BFA_PCI_DEVICE_ID_CT_FC) {
if (bfi_image_ct_fc_size == 0)
@@ -1598,6 +1612,17 @@
}
}
+static void
+bfad_free_fwimg(void)
+{
+ if (bfi_image_ct_fc_size && bfi_image_ct_fc)
+ vfree(bfi_image_ct_fc);
+ if (bfi_image_ct_cna_size && bfi_image_ct_cna)
+ vfree(bfi_image_ct_cna);
+ if (bfi_image_cb_fc_size && bfi_image_cb_fc)
+ vfree(bfi_image_cb_fc);
+}
+
module_init(bfad_init);
module_exit(bfad_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index c66e32e..48be0c5 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -28,10 +28,10 @@
* mount -t debugfs none /sys/kernel/debug
*
* BFA Hierarchy:
- * - bfa/host#
- * where the host number corresponds to the one under /sys/class/scsi_host/host#
+ * - bfa/pci_dev:<pci_name>
+ * where the pci_name corresponds to the one under /sys/bus/pci/drivers/bfa
*
- * Debugging service available per host:
+ * Debugging service available per pci_dev:
* fwtrc: To collect current firmware trace.
* drvtrc: To collect current driver trace
* fwsave: To collect last saved fw trace as a result of firmware crash.
@@ -489,11 +489,9 @@
inline void
bfad_debugfs_init(struct bfad_port_s *port)
{
- struct bfad_im_port_s *im_port = port->im_port;
- struct bfad_s *bfad = im_port->bfad;
- struct Scsi_Host *shost = im_port->shost;
+ struct bfad_s *bfad = port->bfad;
const struct bfad_debugfs_entry *file;
- char name[16];
+ char name[64];
int i;
if (!bfa_debugfs_enable)
@@ -510,17 +508,15 @@
}
}
- /*
- * Setup the host# directory for the port,
- * corresponds to the scsi_host num of this port.
- */
- snprintf(name, sizeof(name), "host%d", shost->host_no);
+ /* Setup the pci_dev debugfs directory for the port */
+ snprintf(name, sizeof(name), "pci_dev:%s", bfad->pci_name);
if (!port->port_debugfs_root) {
port->port_debugfs_root =
debugfs_create_dir(name, bfa_debugfs_root);
if (!port->port_debugfs_root) {
printk(KERN_WARNING
- "BFA host root dir creation failed\n");
+ "bfa %s: debugfs root creation failed\n",
+ bfad->pci_name);
goto err;
}
@@ -536,8 +532,8 @@
file->fops);
if (!bfad->bfad_dentry_files[i]) {
printk(KERN_WARNING
- "BFA host%d: create %s entry failed\n",
- shost->host_no, file->name);
+ "bfa %s: debugfs %s creation failed\n",
+ bfad->pci_name, file->name);
goto err;
}
}
@@ -550,8 +546,7 @@
inline void
bfad_debugfs_exit(struct bfad_port_s *port)
{
- struct bfad_im_port_s *im_port = port->im_port;
- struct bfad_s *bfad = im_port->bfad;
+ struct bfad_s *bfad = port->bfad;
int i;
for (i = 0; i < ARRAY_SIZE(bfad_debugfs_files); i++) {
@@ -562,9 +557,7 @@
}
/*
- * Remove the host# directory for the port,
- * corresponds to the scsi_host num of this port.
- */
+ * Remove the pci_dev debugfs directory for the port */
if (port->port_debugfs_root) {
debugfs_remove(port->port_debugfs_root);
port->port_debugfs_root = NULL;
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
index bfee63b..c296c89 100644
--- a/drivers/scsi/bfa/bfad_im.h
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -141,29 +141,4 @@
irqreturn_t bfad_intx(int irq, void *dev_id);
-/* Firmware releated */
-#define BFAD_FW_FILE_CT_FC "ctfw_fc.bin"
-#define BFAD_FW_FILE_CT_CNA "ctfw_cna.bin"
-#define BFAD_FW_FILE_CB_FC "cbfw_fc.bin"
-
-u32 *bfad_get_firmware_buf(struct pci_dev *pdev);
-u32 *bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
- u32 *bfi_image_size, char *fw_name);
-
-static inline u32 *
-bfad_load_fwimg(struct pci_dev *pdev)
-{
- return bfad_get_firmware_buf(pdev);
-}
-
-static inline void
-bfad_free_fwimg(void)
-{
- if (bfi_image_ct_fc_size && bfi_image_ct_fc)
- vfree(bfi_image_ct_fc);
- if (bfi_image_ct_cna_size && bfi_image_ct_cna)
- vfree(bfi_image_ct_cna);
- if (bfi_image_cb_fc_size && bfi_image_cb_fc)
- vfree(bfi_image_cb_fc);
-}
#endif
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index b6d350a..0a404bf 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -130,7 +130,7 @@
#define BNX2FC_TM_TIMEOUT 60 /* secs */
#define BNX2FC_IO_TIMEOUT 20000UL /* msecs */
-#define BNX2FC_WAIT_CNT 120
+#define BNX2FC_WAIT_CNT 1200
#define BNX2FC_FW_TIMEOUT (3 * HZ)
#define PORT_MAX 2
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index e2e6475..ab255fb 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -664,7 +664,7 @@
struct fcoe_port *port = lport_priv(lport);
struct bnx2fc_hba *hba = port->priv;
struct net_device *netdev = hba->netdev;
- struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ struct ethtool_cmd ecmd;
if (!dev_ethtool_get_settings(netdev, &ecmd)) {
lport->link_supported_speeds &=
@@ -675,12 +675,15 @@
if (ecmd.supported & SUPPORTED_10000baseT_Full)
lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;
- if (ecmd.speed == SPEED_1000)
+ switch (ethtool_cmd_speed(&ecmd)) {
+ case SPEED_1000:
lport->link_speed = FC_PORTSPEED_1GBIT;
- if (ecmd.speed == SPEED_10000)
+ break;
+ case SPEED_10000:
lport->link_speed = FC_PORTSPEED_10GBIT;
+ break;
+ }
}
- return;
}
static int bnx2fc_link_ok(struct fc_lport *lport)
{
@@ -1130,7 +1133,7 @@
struct net_device *phys_dev;
hba = container_of(kref, struct bnx2fc_hba, kref);
- BNX2FC_HBA_DBG(hba->ctlr.lp, "Interface is being released\n");
+ BNX2FC_MISC_DBG("Interface is being released\n");
netdev = hba->netdev;
phys_dev = hba->phys_dev;
@@ -1254,20 +1257,17 @@
static struct fc_lport *bnx2fc_if_create(struct bnx2fc_hba *hba,
struct device *parent, int npiv)
{
- struct fc_lport *lport = NULL;
+ struct fc_lport *lport, *n_port;
struct fcoe_port *port;
struct Scsi_Host *shost;
struct fc_vport *vport = dev_to_vport(parent);
int rc = 0;
/* Allocate Scsi_Host structure */
- if (!npiv) {
- lport = libfc_host_alloc(&bnx2fc_shost_template,
- sizeof(struct fcoe_port));
- } else {
- lport = libfc_vport_create(vport,
- sizeof(struct fcoe_port));
- }
+ if (!npiv)
+ lport = libfc_host_alloc(&bnx2fc_shost_template, sizeof(*port));
+ else
+ lport = libfc_vport_create(vport, sizeof(*port));
if (!lport) {
printk(KERN_ERR PFX "could not allocate scsi host structure\n");
@@ -1285,7 +1285,6 @@
goto lp_config_err;
if (npiv) {
- vport = dev_to_vport(parent);
printk(KERN_ERR PFX "Setting vport names, 0x%llX 0x%llX\n",
vport->node_name, vport->port_name);
fc_set_wwnn(lport, vport->node_name);
@@ -1314,12 +1313,17 @@
fc_host_port_type(lport->host) = FC_PORTTYPE_UNKNOWN;
/* Allocate exchange manager */
- if (!npiv) {
+ if (!npiv)
rc = bnx2fc_em_config(lport);
- if (rc) {
- printk(KERN_ERR PFX "Error on bnx2fc_em_config\n");
- goto shost_err;
- }
+ else {
+ shost = vport_to_shost(vport);
+ n_port = shost_priv(shost);
+ rc = fc_exch_mgr_list_clone(n_port, lport);
+ }
+
+ if (rc) {
+ printk(KERN_ERR PFX "Error on bnx2fc_em_config\n");
+ goto shost_err;
}
bnx2fc_interface_get(hba);
@@ -1352,8 +1356,6 @@
/* Free existing transmit skbs */
fcoe_clean_pending_queue(lport);
- bnx2fc_interface_put(hba);
-
/* Free queued packets for the receive thread */
bnx2fc_clean_rx_queue(lport);
@@ -1372,6 +1374,8 @@
/* Release Scsi_Host */
scsi_host_put(lport->host);
+
+ bnx2fc_interface_put(hba);
}
/**
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 1b680e2..f756d5f 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -522,6 +522,7 @@
fp = fc_frame_alloc(lport, payload_len);
if (!fp) {
printk(KERN_ERR PFX "fc_frame_alloc failure\n");
+ kfree(unsol_els);
return;
}
@@ -547,6 +548,7 @@
*/
printk(KERN_ERR PFX "dropping ELS 0x%x\n", op);
kfree_skb(skb);
+ kfree(unsol_els);
return;
}
}
@@ -563,6 +565,7 @@
} else {
BNX2FC_HBA_DBG(lport, "fh_r_ctl = 0x%x\n", fh->fh_r_ctl);
kfree_skb(skb);
+ kfree(unsol_els);
}
}
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 1decefb..b5b5c34 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1663,6 +1663,12 @@
tgt = (struct bnx2fc_rport *)&rp[1];
if (!test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags)) {
+ if (test_bit(BNX2FC_FLAG_UPLD_REQ_COMPL, &tgt->flags)) {
+ sc_cmd->result = DID_NO_CONNECT << 16;
+ sc_cmd->scsi_done(sc_cmd);
+ return 0;
+
+ }
/*
* Session is not offloaded yet. Let SCSI-ml retry
* the command.
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d0c8234..60d2ef2 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -772,6 +772,7 @@
{0x3802, "Esn - power management class event"},
{0x3804, "Esn - media class event"},
{0x3806, "Esn - device busy class event"},
+ {0x3807, "Thin Provisioning soft threshold reached"},
{0x3900, "Saving parameters not supported"},
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index de764ea..a2a9c7c 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -450,12 +450,13 @@
return csk;
}
-static struct rtable *find_route_ipv4(__be32 saddr, __be32 daddr,
+static struct rtable *find_route_ipv4(struct flowi4 *fl4,
+ __be32 saddr, __be32 daddr,
__be16 sport, __be16 dport, u8 tos)
{
struct rtable *rt;
- rt = ip_route_output_ports(&init_net, NULL, daddr, saddr,
+ rt = ip_route_output_ports(&init_net, fl4, NULL, daddr, saddr,
dport, sport, IPPROTO_TCP, tos, 0);
if (IS_ERR(rt))
return NULL;
@@ -470,6 +471,7 @@
struct net_device *ndev;
struct cxgbi_device *cdev;
struct rtable *rt = NULL;
+ struct flowi4 fl4;
struct cxgbi_sock *csk = NULL;
unsigned int mtu = 0;
int port = 0xFFFF;
@@ -482,7 +484,7 @@
goto err_out;
}
- rt = find_route_ipv4(0, daddr->sin_addr.s_addr, 0, daddr->sin_port, 0);
+ rt = find_route_ipv4(&fl4, 0, daddr->sin_addr.s_addr, 0, daddr->sin_port, 0);
if (!rt) {
pr_info("no route to ipv4 0x%x, port %u.\n",
daddr->sin_addr.s_addr, daddr->sin_port);
@@ -531,7 +533,7 @@
csk->daddr.sin_addr.s_addr = daddr->sin_addr.s_addr;
csk->daddr.sin_port = daddr->sin_port;
csk->daddr.sin_family = daddr->sin_family;
- csk->saddr.sin_addr.s_addr = rt->rt_src;
+ csk->saddr.sin_addr.s_addr = fl4.saddr;
return csk;
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index b10b384..f5b718d 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -778,8 +778,8 @@
static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
- dprintkdbg(DBG_0, "srb_waiting_insert: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_waiting_insert: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_add(&srb->list, &dcb->srb_waiting_list);
}
@@ -787,16 +787,16 @@
static void srb_waiting_append(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
- dprintkdbg(DBG_0, "srb_waiting_append: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_waiting_append: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_waiting_list);
}
static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
- dprintkdbg(DBG_0, "srb_going_append: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_going_append: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_going_list);
}
@@ -805,8 +805,8 @@
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
- dprintkdbg(DBG_0, "srb_going_remove: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_going_remove: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
if (i == srb) {
@@ -821,8 +821,8 @@
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
- dprintkdbg(DBG_0, "srb_waiting_remove: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_waiting_remove: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
if (i == srb) {
@@ -836,8 +836,8 @@
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0,
- "srb_going_to_waiting_move: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ "srb_going_to_waiting_move: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_waiting_list);
}
@@ -846,8 +846,8 @@
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0,
- "srb_waiting_to_going_move: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ "srb_waiting_to_going_move: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_going_list);
}
@@ -982,8 +982,8 @@
{
int nseg;
enum dma_data_direction dir = cmd->sc_data_direction;
- dprintkdbg(DBG_0, "build_srb: (pid#%li) <%02i-%i>\n",
- cmd->serial_number, dcb->target_id, dcb->target_lun);
+ dprintkdbg(DBG_0, "build_srb: (0x%p) <%02i-%i>\n",
+ cmd, dcb->target_id, dcb->target_lun);
srb->dcb = dcb;
srb->cmd = cmd;
@@ -1086,8 +1086,8 @@
struct ScsiReqBlk *srb;
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
- dprintkdbg(DBG_0, "queue_command: (pid#%li) <%02i-%i> cmnd=0x%02x\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ dprintkdbg(DBG_0, "queue_command: (0x%p) <%02i-%i> cmnd=0x%02x\n",
+ cmd, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
/* Assume BAD_TARGET; will be cleared later */
cmd->result = DID_BAD_TARGET << 16;
@@ -1140,7 +1140,7 @@
/* process immediately */
send_srb(acb, srb);
}
- dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->serial_number);
+ dprintkdbg(DBG_1, "queue_command: (0x%p) done\n", cmd);
return 0;
complete:
@@ -1203,9 +1203,9 @@
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
srb, srb->cmd);
else
- dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
+ dprintkl(KERN_INFO, "dump: srb=%p cmd=%p "
"cmnd=0x%02x <%02i-%i>\n",
- srb, srb->cmd, srb->cmd->serial_number,
+ srb, srb->cmd,
srb->cmd->cmnd[0], srb->cmd->device->id,
srb->cmd->device->lun);
printk(" sglist=%p cnt=%i idx=%i len=%zu\n",
@@ -1301,8 +1301,8 @@
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
dprintkl(KERN_INFO,
- "eh_bus_reset: (pid#%li) target=<%02i-%i> cmd=%p\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
+ "eh_bus_reset: (0%p) target=<%02i-%i> cmd=%p\n",
+ cmd, cmd->device->id, cmd->device->lun, cmd);
if (timer_pending(&acb->waiting_timer))
del_timer(&acb->waiting_timer);
@@ -1368,8 +1368,8 @@
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
- dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
+ dprintkl(KERN_INFO, "eh_abort: (0x%p) target=<%02i-%i> cmd=%p\n",
+ cmd, cmd->device->id, cmd->device->lun, cmd);
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
if (!dcb) {
@@ -1495,8 +1495,8 @@
u16 s_stat2, return_code;
u8 s_stat, scsicommand, i, identify_message;
u8 *ptr;
- dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> srb=%p\n",
+ dcb->target_id, dcb->target_lun, srb);
srb->tag_number = TAG_NONE; /* acb->tag_max_num: had error read in eeprom */
@@ -1505,8 +1505,8 @@
s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
#if 1
if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
- dprintkdbg(DBG_KG, "start_scsi: (pid#%li) BUSY %02x %04x\n",
- srb->cmd->serial_number, s_stat, s_stat2);
+ dprintkdbg(DBG_KG, "start_scsi: (0x%p) BUSY %02x %04x\n",
+ s_stat, s_stat2);
/*
* Try anyway?
*
@@ -1522,16 +1522,15 @@
}
#endif
if (acb->active_dcb) {
- dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
- "command while another command (pid#%li) is active.",
- srb->cmd->serial_number,
+ dprintkl(KERN_DEBUG, "start_scsi: (0x%p) Attempt to start a"
+ "command while another command (0x%p) is active.",
+ srb->cmd,
acb->active_dcb->active_srb ?
- acb->active_dcb->active_srb->cmd->serial_number : 0);
+ acb->active_dcb->active_srb->cmd : 0);
return 1;
}
if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
- dprintkdbg(DBG_KG, "start_scsi: (pid#%li) Failed (busy)\n",
- srb->cmd->serial_number);
+ dprintkdbg(DBG_KG, "start_scsi: (0x%p) Failed (busy)\n", srb->cmd);
return 1;
}
/* Allow starting of SCSI commands half a second before we allow the mid-level
@@ -1603,9 +1602,9 @@
tag_number++;
}
if (tag_number >= dcb->max_command) {
- dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
+ dprintkl(KERN_WARNING, "start_scsi: (0x%p) "
"Out of tags target=<%02i-%i>)\n",
- srb->cmd->serial_number, srb->cmd->device->id,
+ srb->cmd, srb->cmd->device->id,
srb->cmd->device->lun);
srb->state = SRB_READY;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
@@ -1623,8 +1622,8 @@
#endif
/*polling:*/
/* Send CDB ..command block ......... */
- dprintkdbg(DBG_KG, "start_scsi: (pid#%li) <%02i-%i> cmnd=0x%02x tag=%i\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
+ dprintkdbg(DBG_KG, "start_scsi: (0x%p) <%02i-%i> cmnd=0x%02x tag=%i\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
srb->cmd->cmnd[0], srb->tag_number);
if (srb->flag & AUTO_REQSENSE) {
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
@@ -1647,8 +1646,8 @@
* we caught an interrupt (must be reset or reselection ... )
* : Let's process it first!
*/
- dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> Failed - busy\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
+ dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> Failed - busy\n",
+ srb->cmd, dcb->target_id, dcb->target_lun);
srb->state = SRB_READY;
free_tag(dcb, srb);
srb->msg_count = 0;
@@ -1843,7 +1842,7 @@
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgout_phase0: (0x%p)\n", srb->cmd);
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
@@ -1857,18 +1856,18 @@
{
u16 i;
u8 *ptr;
- dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgout_phase1: (0x%p)\n", srb->cmd);
clear_fifo(acb, "msgout_phase1");
if (!(srb->state & SRB_MSGOUT)) {
srb->state |= SRB_MSGOUT;
dprintkl(KERN_DEBUG,
- "msgout_phase1: (pid#%li) Phase unexpected\n",
- srb->cmd->serial_number); /* So what ? */
+ "msgout_phase1: (0x%p) Phase unexpected\n",
+ srb->cmd); /* So what ? */
}
if (!srb->msg_count) {
- dprintkdbg(DBG_0, "msgout_phase1: (pid#%li) NOP msg\n",
- srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgout_phase1: (0x%p) NOP msg\n",
+ srb->cmd);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
@@ -1888,7 +1887,7 @@
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "command_phase0: (0x%p)\n", srb->cmd);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
@@ -1899,7 +1898,7 @@
struct DeviceCtlBlk *dcb;
u8 *ptr;
u16 i;
- dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "command_phase1: (0x%p)\n", srb->cmd);
clear_fifo(acb, "command_phase1");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
@@ -2041,8 +2040,8 @@
struct DeviceCtlBlk *dcb = srb->dcb;
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
- dprintkdbg(DBG_0, "data_out_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_out_phase0: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: We need to drain the buffers before we draw any conclusions!
@@ -2171,8 +2170,8 @@
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "data_out_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_out_phase1: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
clear_fifo(acb, "data_out_phase1");
/* do prepare before transfer when data out phase */
data_io_transfer(acb, srb, XFERDATAOUT);
@@ -2183,8 +2182,8 @@
{
u16 scsi_status = *pscsi_status;
- dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_in_phase0: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: DataIn is much more tricky than DataOut. When the device is finished
@@ -2204,8 +2203,8 @@
unsigned int sc, fc;
if (scsi_status & PARITYERROR) {
- dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
- "Parity Error\n", srb->cmd->serial_number);
+ dprintkl(KERN_INFO, "data_in_phase0: (0x%p) "
+ "Parity Error\n", srb->cmd);
srb->status |= PARITY_ERROR;
}
/*
@@ -2394,8 +2393,8 @@
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "data_in_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_in_phase1: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
data_io_transfer(acb, srb, XFERDATAIN);
}
@@ -2406,8 +2405,8 @@
struct DeviceCtlBlk *dcb = srb->dcb;
u8 bval;
dprintkdbg(DBG_0,
- "data_io_transfer: (pid#%li) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
+ "data_io_transfer: (0x%p) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
((io_dir & DMACMD_DIR) ? 'r' : 'w'),
srb->total_xfer_length, srb->sg_index, srb->sg_count);
if (srb == acb->tmp_srb)
@@ -2579,8 +2578,8 @@
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "status_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "status_phase0: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); /* get message */
srb->state = SRB_COMPLETED;
@@ -2593,8 +2592,8 @@
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "status_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "status_phase1: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
srb->state = SRB_STATUS;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
@@ -2635,8 +2634,8 @@
{
struct ScsiReqBlk *srb = NULL;
struct ScsiReqBlk *i;
- dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) tag=%i srb=%p\n",
- srb->cmd->serial_number, tag, srb);
+ dprintkdbg(DBG_0, "msgin_qtag: (0x%p) tag=%i srb=%p\n",
+ srb->cmd, tag, srb);
if (!(dcb->tag_mask & (1 << tag)))
dprintkl(KERN_DEBUG,
@@ -2654,8 +2653,8 @@
if (!srb)
goto mingx0;
- dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->dcb->target_id, srb->dcb->target_lun);
+ dprintkdbg(DBG_0, "msgin_qtag: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->dcb->target_id, srb->dcb->target_lun);
if (dcb->flag & ABORT_DEV_) {
/*srb->state = SRB_ABORT_SENT; */
enable_msgout_abort(acb, srb);
@@ -2865,7 +2864,7 @@
u16 *pscsi_status)
{
struct DeviceCtlBlk *dcb = acb->active_dcb;
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgin_phase0: (0x%p)\n", srb->cmd);
srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
@@ -2931,9 +2930,9 @@
* SAVE POINTER may be ignored as we have the struct
* ScsiReqBlk* associated with the scsi command.
*/
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
+ dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
"SAVE POINTER rem=%i Ignore\n",
- srb->cmd->serial_number, srb->total_xfer_length);
+ srb->cmd, srb->total_xfer_length);
break;
case RESTORE_POINTERS:
@@ -2941,9 +2940,9 @@
break;
case ABORT:
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
+ dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
"<%02i-%i> ABORT msg\n",
- srb->cmd->serial_number, dcb->target_id,
+ srb->cmd, dcb->target_id,
dcb->target_lun);
dcb->flag |= ABORT_DEV_;
enable_msgout_abort(acb, srb);
@@ -2975,7 +2974,7 @@
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgin_phase1: (0x%p)\n", srb->cmd);
clear_fifo(acb, "msgin_phase1");
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
if (!(srb->state & SRB_MSGIN)) {
@@ -3041,7 +3040,7 @@
}
srb = dcb->active_srb;
acb->active_dcb = NULL;
- dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "disconnect: (0x%p)\n", srb->cmd);
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
clear_fifo(acb, "disconnect");
@@ -3071,14 +3070,14 @@
&& srb->state != SRB_MSGOUT) {
srb->state = SRB_READY;
dprintkl(KERN_DEBUG,
- "disconnect: (pid#%li) Unexpected\n",
- srb->cmd->serial_number);
+ "disconnect: (0x%p) Unexpected\n",
+ srb->cmd);
srb->target_status = SCSI_STAT_SEL_TIMEOUT;
goto disc1;
} else {
/* Normal selection timeout */
- dprintkdbg(DBG_KG, "disconnect: (pid#%li) "
- "<%02i-%i> SelTO\n", srb->cmd->serial_number,
+ dprintkdbg(DBG_KG, "disconnect: (0x%p) "
+ "<%02i-%i> SelTO\n", srb->cmd,
dcb->target_id, dcb->target_lun);
if (srb->retry_count++ > DC395x_MAX_RETRIES
|| acb->scan_devices) {
@@ -3089,8 +3088,8 @@
free_tag(dcb, srb);
srb_going_to_waiting_move(dcb, srb);
dprintkdbg(DBG_KG,
- "disconnect: (pid#%li) Retry\n",
- srb->cmd->serial_number);
+ "disconnect: (0x%p) Retry\n",
+ srb->cmd);
waiting_set_timer(acb, HZ / 20);
}
} else if (srb->state & SRB_DISCONNECT) {
@@ -3142,9 +3141,9 @@
}
/* Why the if ? */
if (!acb->scan_devices) {
- dprintkdbg(DBG_KG, "reselect: (pid#%li) <%02i-%i> "
+ dprintkdbg(DBG_KG, "reselect: (0x%p) <%02i-%i> "
"Arb lost but Resel win rsel=%i stat=0x%04x\n",
- srb->cmd->serial_number, dcb->target_id,
+ srb->cmd, dcb->target_id,
dcb->target_lun, rsel_tar_lun_id,
DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
arblostflag = 1;
@@ -3318,7 +3317,7 @@
enum dma_data_direction dir = cmd->sc_data_direction;
int ckc_only = 1;
- dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->serial_number,
+ dprintkdbg(DBG_1, "srb_done: (0x%p) <%02i-%i>\n", srb->cmd,
srb->cmd->device->id, srb->cmd->device->lun);
dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p\n",
srb, scsi_sg_count(cmd), srb->sg_index, srb->sg_count,
@@ -3497,9 +3496,9 @@
cmd->SCp.buffers_residual = 0;
if (debug_enabled(DBG_KG)) {
if (srb->total_xfer_length)
- dprintkdbg(DBG_KG, "srb_done: (pid#%li) <%02i-%i> "
+ dprintkdbg(DBG_KG, "srb_done: (0x%p) <%02i-%i> "
"cmnd=0x%02x Missed %i bytes\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun,
+ cmd, cmd->device->id, cmd->device->lun,
cmd->cmnd[0], srb->total_xfer_length);
}
@@ -3508,8 +3507,8 @@
if (srb == acb->tmp_srb)
dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
else {
- dprintkdbg(DBG_0, "srb_done: (pid#%li) done result=0x%08x\n",
- cmd->serial_number, cmd->result);
+ dprintkdbg(DBG_0, "srb_done: (0x%p) done result=0x%08x\n",
+ cmd, cmd->result);
srb_free_insert(acb, srb);
}
pci_unmap_srb(acb, srb);
@@ -3538,7 +3537,7 @@
p = srb->cmd;
dir = p->sc_data_direction;
result = MK_RES(0, did_flag, 0, 0);
- printk("G:%li(%02i-%i) ", p->serial_number,
+ printk("G:%p(%02i-%i) ", p,
p->device->id, p->device->lun);
srb_going_remove(dcb, srb);
free_tag(dcb, srb);
@@ -3568,7 +3567,7 @@
p = srb->cmd;
result = MK_RES(0, did_flag, 0, 0);
- printk("W:%li<%02i-%i>", p->serial_number, p->device->id,
+ printk("W:%p<%02i-%i>", p, p->device->id,
p->device->lun);
srb_waiting_remove(dcb, srb);
srb_free_insert(acb, srb);
@@ -3677,8 +3676,8 @@
struct ScsiReqBlk *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
- dprintkdbg(DBG_1, "request_sense: (pid#%li) <%02i-%i>\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun);
+ dprintkdbg(DBG_1, "request_sense: (0x%p) <%02i-%i>\n",
+ cmd, cmd->device->id, cmd->device->lun);
srb->flag |= AUTO_REQSENSE;
srb->adapter_status = 0;
@@ -3708,8 +3707,8 @@
if (start_scsi(acb, dcb, srb)) { /* Should only happen, if sb. else grabs the bus */
dprintkl(KERN_DEBUG,
- "request_sense: (pid#%li) failed <%02i-%i>\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
+ "request_sense: (0x%p) failed <%02i-%i>\n",
+ srb->cmd, dcb->target_id, dcb->target_lun);
srb_going_to_waiting_move(dcb, srb);
waiting_set_timer(acb, HZ / 100);
}
@@ -4717,13 +4716,13 @@
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_waiting_list));
list_for_each_entry(srb, &dcb->srb_waiting_list, list)
- SPRINTF(" %li", srb->cmd->serial_number);
+ SPRINTF(" %p", srb->cmd);
if (!list_empty(&dcb->srb_going_list))
SPRINTF("\nDCB (%02i-%i): Going : %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_going_list));
list_for_each_entry(srb, &dcb->srb_going_list, list)
- SPRINTF(" %li", srb->cmd->serial_number);
+ SPRINTF(" %p", srb->cmd);
if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
SPRINTF("\n");
}
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 42fe529..6fec9fe 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -782,7 +782,7 @@
h->sdev = sdev;
err = alua_initialize(sdev, h);
- if (err != SCSI_DH_OK)
+ if ((err != SCSI_DH_OK) && (err != SCSI_DH_DEV_OFFLINED))
goto failed;
if (!try_module_get(THIS_MODULE))
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 293c183..e7fc70d 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -182,14 +182,24 @@
struct rdac_controller *ctlr;
#define UNINITIALIZED_LUN (1 << 8)
unsigned lun;
+
+#define RDAC_MODE 0
+#define RDAC_MODE_AVT 1
+#define RDAC_MODE_IOSHIP 2
+ unsigned char mode;
+
#define RDAC_STATE_ACTIVE 0
#define RDAC_STATE_PASSIVE 1
unsigned char state;
#define RDAC_LUN_UNOWNED 0
#define RDAC_LUN_OWNED 1
-#define RDAC_LUN_AVT 2
char lun_state;
+
+#define RDAC_PREFERRED 0
+#define RDAC_NON_PREFERRED 1
+ char preferred;
+
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
union {
struct c2_inquiry c2;
@@ -199,11 +209,15 @@
} inq;
};
+static const char *mode[] = {
+ "RDAC",
+ "AVT",
+ "IOSHIP",
+};
static const char *lun_state[] =
{
"unowned",
"owned",
- "owned (AVT mode)",
};
struct rdac_queue_data {
@@ -458,25 +472,33 @@
int err;
struct c9_inquiry *inqp;
- h->lun_state = RDAC_LUN_UNOWNED;
h->state = RDAC_STATE_ACTIVE;
err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
if (err == SCSI_DH_OK) {
inqp = &h->inq.c9;
- if ((inqp->avte_cvp >> 7) == 0x1) {
- /* LUN in AVT mode */
- sdev_printk(KERN_NOTICE, sdev,
- "%s: AVT mode detected\n",
- RDAC_NAME);
- h->lun_state = RDAC_LUN_AVT;
- } else if ((inqp->avte_cvp & 0x1) != 0) {
- /* LUN was owned by the controller */
- h->lun_state = RDAC_LUN_OWNED;
- }
- }
+ /* detect the operating mode */
+ if ((inqp->avte_cvp >> 5) & 0x1)
+ h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */
+ else if (inqp->avte_cvp >> 7)
+ h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */
+ else
+ h->mode = RDAC_MODE; /* LUN in RDAC mode */
- if (h->lun_state == RDAC_LUN_UNOWNED)
- h->state = RDAC_STATE_PASSIVE;
+ /* Update ownership */
+ if (inqp->avte_cvp & 0x1)
+ h->lun_state = RDAC_LUN_OWNED;
+ else {
+ h->lun_state = RDAC_LUN_UNOWNED;
+ if (h->mode == RDAC_MODE)
+ h->state = RDAC_STATE_PASSIVE;
+ }
+
+ /* Update path prio*/
+ if (inqp->path_prio & 0x1)
+ h->preferred = RDAC_PREFERRED;
+ else
+ h->preferred = RDAC_NON_PREFERRED;
+ }
return err;
}
@@ -648,12 +670,27 @@
{
struct rdac_dh_data *h = get_rdac_data(sdev);
int err = SCSI_DH_OK;
+ int act = 0;
err = check_ownership(sdev, h);
if (err != SCSI_DH_OK)
goto done;
- if (h->lun_state == RDAC_LUN_UNOWNED) {
+ switch (h->mode) {
+ case RDAC_MODE:
+ if (h->lun_state == RDAC_LUN_UNOWNED)
+ act = 1;
+ break;
+ case RDAC_MODE_IOSHIP:
+ if ((h->lun_state == RDAC_LUN_UNOWNED) &&
+ (h->preferred == RDAC_PREFERRED))
+ act = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (act) {
err = queue_mode_select(sdev, fn, data);
if (err == SCSI_DH_OK)
return 0;
@@ -836,8 +873,9 @@
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
sdev_printk(KERN_NOTICE, sdev,
- "%s: LUN %d (%s)\n",
- RDAC_NAME, h->lun, lun_state[(int)h->lun_state]);
+ "%s: LUN %d (%s) (%s)\n",
+ RDAC_NAME, h->lun, mode[(int)h->mode],
+ lun_state[(int)h->lun_state]);
return 0;
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index cffcb10..b4f6c9a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -780,7 +780,7 @@
return FAILED;
}
pHba = (adpt_hba*) cmd->device->host->hostdata[0];
- printk(KERN_INFO"%s: Trying to Abort cmd=%ld\n",pHba->name, cmd->serial_number);
+ printk(KERN_INFO"%s: Trying to Abort\n",pHba->name);
if ((dptdevice = (void*) (cmd->device->hostdata)) == NULL) {
printk(KERN_ERR "%s: Unable to abort: No device in cmnd\n",pHba->name);
return FAILED;
@@ -802,10 +802,10 @@
printk(KERN_INFO"%s: Abort cmd not supported\n",pHba->name);
return FAILED;
}
- printk(KERN_INFO"%s: Abort cmd=%ld failed.\n",pHba->name, cmd->serial_number);
+ printk(KERN_INFO"%s: Abort failed.\n",pHba->name);
return FAILED;
}
- printk(KERN_INFO"%s: Abort cmd=%ld complete.\n",pHba->name, cmd->serial_number);
+ printk(KERN_INFO"%s: Abort complete.\n",pHba->name);
return SUCCESS;
}
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 0eb4fe6..94de889 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1766,8 +1766,8 @@
struct mscp *cpp;
if (SCpnt->host_scribble)
- panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
- ha->board_name, SCpnt->serial_number, SCpnt);
+ panic("%s: qcomm, SCpnt %p already active.\n",
+ ha->board_name, SCpnt);
/* i is the mailbox number, look for the first free mailbox
starting from last_cp_used */
@@ -1801,7 +1801,7 @@
if (do_trace)
scmd_printk(KERN_INFO, SCpnt,
- "qcomm, mbox %d, pid %ld.\n", i, SCpnt->serial_number);
+ "qcomm, mbox %d.\n", i);
cpp->reqsen = 1;
cpp->dispri = 1;
@@ -1833,8 +1833,7 @@
if (do_dma(shost->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
unmap_dma(i, ha);
SCpnt->host_scribble = NULL;
- scmd_printk(KERN_INFO, SCpnt,
- "qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
+ scmd_printk(KERN_INFO, SCpnt, "qcomm, adapter busy.\n");
return 1;
}
@@ -1851,14 +1850,12 @@
unsigned int i;
if (SCarg->host_scribble == NULL) {
- scmd_printk(KERN_INFO, SCarg,
- "abort, pid %ld inactive.\n", SCarg->serial_number);
+ scmd_printk(KERN_INFO, SCarg, "abort, cmd inactive.\n");
return SUCCESS;
}
i = *(unsigned int *)SCarg->host_scribble;
- scmd_printk(KERN_WARNING, SCarg,
- "abort, mbox %d, pid %ld.\n", i, SCarg->serial_number);
+ scmd_printk(KERN_WARNING, SCarg, "abort, mbox %d.\n", i);
if (i >= shost->can_queue)
panic("%s: abort, invalid SCarg->host_scribble.\n", ha->board_name);
@@ -1902,8 +1899,8 @@
SCarg->result = DID_ABORT << 16;
SCarg->host_scribble = NULL;
ha->cp_stat[i] = FREE;
- printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
- ha->board_name, i, SCarg->serial_number);
+ printk("%s, abort, mbox %d ready, DID_ABORT, done.\n",
+ ha->board_name, i);
SCarg->scsi_done(SCarg);
return SUCCESS;
}
@@ -1919,13 +1916,12 @@
struct Scsi_Host *shost = SCarg->device->host;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
- scmd_printk(KERN_INFO, SCarg,
- "reset, enter, pid %ld.\n", SCarg->serial_number);
+ scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
spin_lock_irq(shost->host_lock);
if (SCarg->host_scribble == NULL)
- printk("%s: reset, pid %ld inactive.\n", ha->board_name, SCarg->serial_number);
+ printk("%s: reset, inactive.\n", ha->board_name);
if (ha->in_reset) {
printk("%s: reset, exit, already in reset.\n", ha->board_name);
@@ -1964,14 +1960,14 @@
if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
ha->cp_stat[i] = ABORTING;
- printk("%s: reset, mbox %d aborting, pid %ld.\n",
- ha->board_name, i, SCpnt->serial_number);
+ printk("%s: reset, mbox %d aborting.\n",
+ ha->board_name, i);
}
else {
ha->cp_stat[i] = IN_RESET;
- printk("%s: reset, mbox %d in reset, pid %ld.\n",
- ha->board_name, i, SCpnt->serial_number);
+ printk("%s: reset, mbox %d in reset.\n",
+ ha->board_name, i);
}
if (SCpnt->host_scribble == NULL)
@@ -2025,8 +2021,8 @@
ha->cp_stat[i] = LOCKED;
printk
- ("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
- ha->board_name, i, SCpnt->serial_number);
+ ("%s, reset, mbox %d locked, DID_RESET, done.\n",
+ ha->board_name, i);
}
else if (ha->cp_stat[i] == ABORTING) {
@@ -2039,8 +2035,8 @@
ha->cp_stat[i] = FREE;
printk
- ("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
- ha->board_name, i, SCpnt->serial_number);
+ ("%s, reset, mbox %d aborting, DID_RESET, done.\n",
+ ha->board_name, i);
}
else
@@ -2054,7 +2050,7 @@
do_trace = 0;
if (arg_done)
- printk("%s: reset, exit, pid %ld done.\n", ha->board_name, SCarg->serial_number);
+ printk("%s: reset, exit, done.\n", ha->board_name);
else
printk("%s: reset, exit.\n", ha->board_name);
@@ -2238,10 +2234,10 @@
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
scmd_printk(KERN_INFO, SCpnt,
- "%s pid %ld mb %d fc %d nr %d sec %ld ns %u"
+ "%s mb %d fc %d nr %d sec %ld ns %u"
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->serial_number, k, flushcount,
+ k, flushcount,
n_ready, blk_rq_pos(SCpnt->request),
blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
YESNO(r), YESNO(rev), YESNO(input_only),
@@ -2285,10 +2281,10 @@
if (do_dma(dev->host->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
scmd_printk(KERN_INFO, SCpnt,
- "%s, pid %ld, mbox %d, adapter"
+ "%s, mbox %d, adapter"
" busy, will abort.\n",
(ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->serial_number, k);
+ k);
ha->cp_stat[k] = ABORTING;
continue;
}
@@ -2398,12 +2394,12 @@
panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
if (SCpnt->host_scribble == NULL)
- panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", ha->board_name,
- i, SCpnt->serial_number, SCpnt);
+ panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", ha->board_name,
+ i, SCpnt);
if (*(unsigned int *)SCpnt->host_scribble != i)
- panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
- ha->board_name, i, SCpnt->serial_number,
+ panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
+ ha->board_name, i,
*(unsigned int *)SCpnt->host_scribble);
sync_dma(i, ha);
@@ -2449,11 +2445,11 @@
if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
(!(tstatus == CHECK_CONDITION && ha->iocount <= 1000 &&
(SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
- printk("%s: ihdlr, target %d.%d:%d, pid %ld, "
+ printk("%s: ihdlr, target %d.%d:%d, "
"target_status 0x%x, sense key 0x%x.\n",
ha->board_name,
SCpnt->device->channel, SCpnt->device->id,
- SCpnt->device->lun, SCpnt->serial_number,
+ SCpnt->device->lun,
spp->target_status, SCpnt->sense_buffer[2]);
ha->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
@@ -2522,9 +2518,9 @@
do_trace || msg_byte(spp->target_status))
#endif
scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"
- " pid %ld, reg 0x%x, count %d.\n",
+ " reg 0x%x, count %d.\n",
i, spp->adapter_status, spp->target_status,
- SCpnt->serial_number, reg, ha->iocount);
+ reg, ha->iocount);
unmap_dma(i, ha);
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 4a9641e..d5f8362 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -372,8 +372,7 @@
cp->status = USED; /* claim free slot */
DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
- "eata_pio_queue pid %ld, y %d\n",
- cmd->serial_number, y));
+ "eata_pio_queue 0x%p, y %d\n", cmd, y));
cmd->scsi_done = (void *) done;
@@ -417,8 +416,8 @@
if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
cmd->result = DID_BUS_BUSY << 16;
scmd_printk(KERN_NOTICE, cmd,
- "eata_pio_queue pid %ld, HBA busy, "
- "returning DID_BUS_BUSY, done.\n", cmd->serial_number);
+ "eata_pio_queue pid 0x%p, HBA busy, "
+ "returning DID_BUS_BUSY, done.\n", cmd);
done(cmd);
cp->status = FREE;
return 0;
@@ -432,8 +431,8 @@
outw(0, base + HA_RDATA);
DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
- "Queued base %#.4lx pid: %ld "
- "slot %d irq %d\n", sh->base, cmd->serial_number, y, sh->irq));
+ "Queued base %#.4lx cmd: 0x%p "
+ "slot %d irq %d\n", sh->base, cmd, y, sh->irq));
return 0;
}
@@ -445,8 +444,7 @@
unsigned int loop = 100;
DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
- "eata_pio_abort called pid: %ld\n",
- cmd->serial_number));
+ "eata_pio_abort called pid: 0x%p\n", cmd));
while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
if (--loop == 0) {
@@ -481,8 +479,7 @@
struct Scsi_Host *host = cmd->device->host;
DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
- "eata_pio_reset called pid:%ld\n",
- cmd->serial_number));
+ "eata_pio_reset called\n"));
spin_lock_irq(host->host_lock);
@@ -501,7 +498,7 @@
sp = HD(cmd)->ccb[x].cmd;
HD(cmd)->ccb[x].status = RESET;
- printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->serial_number);
+ printk(KERN_WARNING "eata_pio_reset: slot %d in reset.\n", x);
if (sp == NULL)
panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 5755852..9a1af1d 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -708,8 +708,7 @@
tp = &esp->target[tgt];
lp = dev->hostdata;
- list_del(&ent->list);
- list_add(&ent->list, &esp->active_cmds);
+ list_move(&ent->list, &esp->active_cmds);
esp->active_cmd = ent;
@@ -1244,8 +1243,7 @@
/* Now that the state is unwound properly, put back onto
* the issue queue. This command is no longer active.
*/
- list_del(&ent->list);
- list_add(&ent->list, &esp->queued_cmds);
+ list_move(&ent->list, &esp->queued_cmds);
esp->active_cmd = NULL;
/* Return value ignored by caller, it directly invokes
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index bde6ee5..cc23bd9 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -381,49 +381,6 @@
}
/**
- * fcoe_interface_cleanup() - Clean up a FCoE interface
- * @fcoe: The FCoE interface to be cleaned up
- *
- * Caller must be holding the RTNL mutex
- */
-void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
-{
- struct net_device *netdev = fcoe->netdev;
- struct fcoe_ctlr *fip = &fcoe->ctlr;
- u8 flogi_maddr[ETH_ALEN];
- const struct net_device_ops *ops;
-
- /*
- * Don't listen for Ethernet packets anymore.
- * synchronize_net() ensures that the packet handlers are not running
- * on another CPU. dev_remove_pack() would do that, this calls the
- * unsyncronized version __dev_remove_pack() to avoid multiple delays.
- */
- __dev_remove_pack(&fcoe->fcoe_packet_type);
- __dev_remove_pack(&fcoe->fip_packet_type);
- synchronize_net();
-
- /* Delete secondary MAC addresses */
- memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
- dev_uc_del(netdev, flogi_maddr);
- if (fip->spma)
- dev_uc_del(netdev, fip->ctl_src_addr);
- if (fip->mode == FIP_MODE_VN2VN) {
- dev_mc_del(netdev, FIP_ALL_VN2VN_MACS);
- dev_mc_del(netdev, FIP_ALL_P2P_MACS);
- } else
- dev_mc_del(netdev, FIP_ALL_ENODE_MACS);
-
- /* Tell the LLD we are done w/ FCoE */
- ops = netdev->netdev_ops;
- if (ops->ndo_fcoe_disable) {
- if (ops->ndo_fcoe_disable(netdev))
- FCOE_NETDEV_DBG(netdev, "Failed to disable FCoE"
- " specific feature for LLD.\n");
- }
-}
-
-/**
* fcoe_interface_release() - fcoe_port kref release function
* @kref: Embedded reference count in an fcoe_interface struct
*/
@@ -460,6 +417,68 @@
}
/**
+ * fcoe_interface_cleanup() - Clean up a FCoE interface
+ * @fcoe: The FCoE interface to be cleaned up
+ *
+ * Caller must be holding the RTNL mutex
+ */
+void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
+{
+ struct net_device *netdev = fcoe->netdev;
+ struct fcoe_ctlr *fip = &fcoe->ctlr;
+ u8 flogi_maddr[ETH_ALEN];
+ const struct net_device_ops *ops;
+ struct fcoe_port *port = lport_priv(fcoe->ctlr.lp);
+
+ FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
+
+ /* Logout of the fabric */
+ fc_fabric_logoff(fcoe->ctlr.lp);
+
+ /* Cleanup the fc_lport */
+ fc_lport_destroy(fcoe->ctlr.lp);
+
+ /* Stop the transmit retry timer */
+ del_timer_sync(&port->timer);
+
+ /* Free existing transmit skbs */
+ fcoe_clean_pending_queue(fcoe->ctlr.lp);
+
+ /*
+ * Don't listen for Ethernet packets anymore.
+ * synchronize_net() ensures that the packet handlers are not running
+ * on another CPU. dev_remove_pack() would do that, this calls the
+ * unsyncronized version __dev_remove_pack() to avoid multiple delays.
+ */
+ __dev_remove_pack(&fcoe->fcoe_packet_type);
+ __dev_remove_pack(&fcoe->fip_packet_type);
+ synchronize_net();
+
+ /* Delete secondary MAC addresses */
+ memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
+ dev_uc_del(netdev, flogi_maddr);
+ if (fip->spma)
+ dev_uc_del(netdev, fip->ctl_src_addr);
+ if (fip->mode == FIP_MODE_VN2VN) {
+ dev_mc_del(netdev, FIP_ALL_VN2VN_MACS);
+ dev_mc_del(netdev, FIP_ALL_P2P_MACS);
+ } else
+ dev_mc_del(netdev, FIP_ALL_ENODE_MACS);
+
+ if (!is_zero_ether_addr(port->data_src_addr))
+ dev_uc_del(netdev, port->data_src_addr);
+
+ /* Tell the LLD we are done w/ FCoE */
+ ops = netdev->netdev_ops;
+ if (ops->ndo_fcoe_disable) {
+ if (ops->ndo_fcoe_disable(netdev))
+ FCOE_NETDEV_DBG(netdev, "Failed to disable FCoE"
+ " specific feature for LLD.\n");
+ }
+ fcoe_interface_put(fcoe);
+}
+
+/**
* fcoe_fip_recv() - Handler for received FIP frames
* @skb: The receive skb
* @netdev: The associated net device
@@ -821,39 +840,9 @@
* fcoe_if_destroy() - Tear down a SW FCoE instance
* @lport: The local port to be destroyed
*
- * Locking: must be called with the RTNL mutex held and RTNL mutex
- * needed to be dropped by this function since not dropping RTNL
- * would cause circular locking warning on synchronous fip worker
- * cancelling thru fcoe_interface_put invoked by this function.
- *
*/
static void fcoe_if_destroy(struct fc_lport *lport)
{
- struct fcoe_port *port = lport_priv(lport);
- struct fcoe_interface *fcoe = port->priv;
- struct net_device *netdev = fcoe->netdev;
-
- FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
-
- /* Logout of the fabric */
- fc_fabric_logoff(lport);
-
- /* Cleanup the fc_lport */
- fc_lport_destroy(lport);
-
- /* Stop the transmit retry timer */
- del_timer_sync(&port->timer);
-
- /* Free existing transmit skbs */
- fcoe_clean_pending_queue(lport);
-
- if (!is_zero_ether_addr(port->data_src_addr))
- dev_uc_del(netdev, port->data_src_addr);
- rtnl_unlock();
-
- /* receives may not be stopped until after this */
- fcoe_interface_put(fcoe);
-
/* Free queued packets for the per-CPU receive threads */
fcoe_percpu_clean(lport);
@@ -1783,23 +1772,8 @@
int rc = 0;
mutex_lock(&fcoe_config_mutex);
-#ifdef CONFIG_FCOE_MODULE
- /*
- * Make sure the module has been initialized, and is not about to be
- * removed. Module paramter sysfs files are writable before the
- * module_init function is called and after module_exit.
- */
- if (THIS_MODULE->state != MODULE_STATE_LIVE) {
- rc = -ENODEV;
- goto out_nodev;
- }
-#endif
- if (!rtnl_trylock()) {
- mutex_unlock(&fcoe_config_mutex);
- return -ERESTARTSYS;
- }
-
+ rtnl_lock();
fcoe = fcoe_hostlist_lookup_port(netdev);
rtnl_unlock();
@@ -1809,7 +1783,6 @@
} else
rc = -ENODEV;
-out_nodev:
mutex_unlock(&fcoe_config_mutex);
return rc;
}
@@ -1828,22 +1801,7 @@
int rc = 0;
mutex_lock(&fcoe_config_mutex);
-#ifdef CONFIG_FCOE_MODULE
- /*
- * Make sure the module has been initialized, and is not about to be
- * removed. Module paramter sysfs files are writable before the
- * module_init function is called and after module_exit.
- */
- if (THIS_MODULE->state != MODULE_STATE_LIVE) {
- rc = -ENODEV;
- goto out_nodev;
- }
-#endif
- if (!rtnl_trylock()) {
- mutex_unlock(&fcoe_config_mutex);
- return -ERESTARTSYS;
- }
-
+ rtnl_lock();
fcoe = fcoe_hostlist_lookup_port(netdev);
rtnl_unlock();
@@ -1852,7 +1810,6 @@
else if (!fcoe_link_ok(fcoe->ctlr.lp))
fcoe_ctlr_link_up(&fcoe->ctlr);
-out_nodev:
mutex_unlock(&fcoe_config_mutex);
return rc;
}
@@ -1868,35 +1825,22 @@
static int fcoe_destroy(struct net_device *netdev)
{
struct fcoe_interface *fcoe;
+ struct fc_lport *lport;
int rc = 0;
mutex_lock(&fcoe_config_mutex);
-#ifdef CONFIG_FCOE_MODULE
- /*
- * Make sure the module has been initialized, and is not about to be
- * removed. Module paramter sysfs files are writable before the
- * module_init function is called and after module_exit.
- */
- if (THIS_MODULE->state != MODULE_STATE_LIVE) {
- rc = -ENODEV;
- goto out_nodev;
- }
-#endif
- if (!rtnl_trylock()) {
- mutex_unlock(&fcoe_config_mutex);
- return -ERESTARTSYS;
- }
-
+ rtnl_lock();
fcoe = fcoe_hostlist_lookup_port(netdev);
if (!fcoe) {
rtnl_unlock();
rc = -ENODEV;
goto out_nodev;
}
- fcoe_interface_cleanup(fcoe);
+ lport = fcoe->ctlr.lp;
list_del(&fcoe->list);
- /* RTNL mutex is dropped by fcoe_if_destroy */
- fcoe_if_destroy(fcoe->ctlr.lp);
+ fcoe_interface_cleanup(fcoe);
+ rtnl_unlock();
+ fcoe_if_destroy(lport);
out_nodev:
mutex_unlock(&fcoe_config_mutex);
return rc;
@@ -1912,8 +1856,6 @@
port = container_of(work, struct fcoe_port, destroy_work);
mutex_lock(&fcoe_config_mutex);
- rtnl_lock();
- /* RTNL mutex is dropped by fcoe_if_destroy */
fcoe_if_destroy(port->lport);
mutex_unlock(&fcoe_config_mutex);
}
@@ -1948,23 +1890,7 @@
struct fc_lport *lport;
mutex_lock(&fcoe_config_mutex);
-
- if (!rtnl_trylock()) {
- mutex_unlock(&fcoe_config_mutex);
- return -ERESTARTSYS;
- }
-
-#ifdef CONFIG_FCOE_MODULE
- /*
- * Make sure the module has been initialized, and is not about to be
- * removed. Module paramter sysfs files are writable before the
- * module_init function is called and after module_exit.
- */
- if (THIS_MODULE->state != MODULE_STATE_LIVE) {
- rc = -ENODEV;
- goto out_nodev;
- }
-#endif
+ rtnl_lock();
/* look for existing lport */
if (fcoe_hostlist_lookup(netdev)) {
@@ -2026,7 +1952,7 @@
int fcoe_link_speed_update(struct fc_lport *lport)
{
struct net_device *netdev = fcoe_netdev(lport);
- struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ struct ethtool_cmd ecmd;
if (!dev_ethtool_get_settings(netdev, &ecmd)) {
lport->link_supported_speeds &=
@@ -2037,11 +1963,14 @@
if (ecmd.supported & SUPPORTED_10000baseT_Full)
lport->link_supported_speeds |=
FC_PORTSPEED_10GBIT;
- if (ecmd.speed == SPEED_1000)
+ switch (ethtool_cmd_speed(&ecmd)) {
+ case SPEED_1000:
lport->link_speed = FC_PORTSPEED_1GBIT;
- if (ecmd.speed == SPEED_10000)
+ break;
+ case SPEED_10000:
lport->link_speed = FC_PORTSPEED_10GBIT;
-
+ break;
+ }
return 0;
}
return -1;
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 9d38be2..229e4af 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -978,10 +978,8 @@
* the FCF that answers multicast solicitations, not the others that
* are sending periodic multicast advertisements.
*/
- if (mtu_valid) {
- list_del(&fcf->list);
- list_add(&fcf->list, &fip->fcfs);
- }
+ if (mtu_valid)
+ list_move(&fcf->list, &fip->fcfs);
/*
* If this is the first validated FCF, note the time and
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index 2586841..f81f77c 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -335,7 +335,7 @@
EXPORT_SYMBOL(fcoe_transport_attach);
/**
- * fcoe_transport_attach - Detaches an FCoE transport
+ * fcoe_transport_detach - Detaches an FCoE transport
* @ft: The fcoe transport to be attached
*
* Returns : 0 for success
@@ -343,6 +343,7 @@
int fcoe_transport_detach(struct fcoe_transport *ft)
{
int rc = 0;
+ struct fcoe_netdev_mapping *nm = NULL, *tmp;
mutex_lock(&ft_mutex);
if (!ft->attached) {
@@ -352,6 +353,19 @@
goto out_attach;
}
+ /* remove netdev mapping for this transport as it is going away */
+ mutex_lock(&fn_mutex);
+ list_for_each_entry_safe(nm, tmp, &fcoe_netdevs, list) {
+ if (nm->ft == ft) {
+ LIBFCOE_TRANSPORT_DBG("transport %s going away, "
+ "remove its netdev mapping for %s\n",
+ ft->name, nm->netdev->name);
+ list_del(&nm->list);
+ kfree(nm);
+ }
+ }
+ mutex_unlock(&fn_mutex);
+
list_del(&ft->list);
ft->attached = false;
LIBFCOE_TRANSPORT_DBG("detaching transport %s\n", ft->name);
@@ -371,9 +385,9 @@
i = j = sprintf(buffer, "Attached FCoE transports:");
mutex_lock(&ft_mutex);
list_for_each_entry(ft, &fcoe_transports, list) {
- i += snprintf(&buffer[i], IFNAMSIZ, "%s ", ft->name);
- if (i >= PAGE_SIZE)
+ if (i >= PAGE_SIZE - IFNAMSIZ)
break;
+ i += snprintf(&buffer[i], IFNAMSIZ, "%s ", ft->name);
}
mutex_unlock(&ft_mutex);
if (i == j)
@@ -530,9 +544,6 @@
struct fcoe_transport *ft = NULL;
enum fip_state fip_mode = (enum fip_state)(long)kp->arg;
- if (!mutex_trylock(&ft_mutex))
- return restart_syscall();
-
#ifdef CONFIG_LIBFCOE_MODULE
/*
* Make sure the module has been initialized, and is not about to be
@@ -543,6 +554,8 @@
goto out_nodev;
#endif
+ mutex_lock(&ft_mutex);
+
netdev = fcoe_if_to_netdev(buffer);
if (!netdev) {
LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buffer);
@@ -586,10 +599,7 @@
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
- if (rc == -ERESTARTSYS)
- return restart_syscall();
- else
- return rc;
+ return rc;
}
/**
@@ -608,9 +618,6 @@
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
- if (!mutex_trylock(&ft_mutex))
- return restart_syscall();
-
#ifdef CONFIG_LIBFCOE_MODULE
/*
* Make sure the module has been initialized, and is not about to be
@@ -621,6 +628,8 @@
goto out_nodev;
#endif
+ mutex_lock(&ft_mutex);
+
netdev = fcoe_if_to_netdev(buffer);
if (!netdev) {
LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buffer);
@@ -645,11 +654,7 @@
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
-
- if (rc == -ERESTARTSYS)
- return restart_syscall();
- else
- return rc;
+ return rc;
}
/**
@@ -667,9 +672,6 @@
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
- if (!mutex_trylock(&ft_mutex))
- return restart_syscall();
-
#ifdef CONFIG_LIBFCOE_MODULE
/*
* Make sure the module has been initialized, and is not about to be
@@ -680,6 +682,8 @@
goto out_nodev;
#endif
+ mutex_lock(&ft_mutex);
+
netdev = fcoe_if_to_netdev(buffer);
if (!netdev)
goto out_nodev;
@@ -716,9 +720,6 @@
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
- if (!mutex_trylock(&ft_mutex))
- return restart_syscall();
-
#ifdef CONFIG_LIBFCOE_MODULE
/*
* Make sure the module has been initialized, and is not about to be
@@ -729,6 +730,8 @@
goto out_nodev;
#endif
+ mutex_lock(&ft_mutex);
+
netdev = fcoe_if_to_netdev(buffer);
if (!netdev)
goto out_nodev;
@@ -743,10 +746,7 @@
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
- if (rc == -ERESTARTSYS)
- return restart_syscall();
- else
- return rc;
+ return rc;
}
/**
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 415ad4f..c6c0434 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -273,7 +273,7 @@
"performant" : "simple");
}
-/* List of controllers which cannot be reset on kexec with reset_devices */
+/* List of controllers which cannot be hard reset on kexec with reset_devices */
static u32 unresettable_controller[] = {
0x324a103C, /* Smart Array P712m */
0x324b103C, /* SmartArray P711m */
@@ -291,16 +291,45 @@
0x409D0E11, /* Smart Array 6400 EM */
};
-static int ctlr_is_resettable(struct ctlr_info *h)
+/* List of controllers which cannot even be soft reset */
+static u32 soft_unresettable_controller[] = {
+ /* Exclude 640x boards. These are two pci devices in one slot
+ * which share a battery backed cache module. One controls the
+ * cache, the other accesses the cache through the one that controls
+ * it. If we reset the one controlling the cache, the other will
+ * likely not be happy. Just forbid resetting this conjoined mess.
+ * The 640x isn't really supported by hpsa anyway.
+ */
+ 0x409C0E11, /* Smart Array 6400 */
+ 0x409D0E11, /* Smart Array 6400 EM */
+};
+
+static int ctlr_is_hard_resettable(u32 board_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++)
- if (unresettable_controller[i] == h->board_id)
+ if (unresettable_controller[i] == board_id)
return 0;
return 1;
}
+static int ctlr_is_soft_resettable(u32 board_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++)
+ if (soft_unresettable_controller[i] == board_id)
+ return 0;
+ return 1;
+}
+
+static int ctlr_is_resettable(u32 board_id)
+{
+ return ctlr_is_hard_resettable(board_id) ||
+ ctlr_is_soft_resettable(board_id);
+}
+
static ssize_t host_show_resettable(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -308,7 +337,7 @@
struct Scsi_Host *shost = class_to_shost(dev);
h = shost_to_hba(shost);
- return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h));
+ return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
}
static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
@@ -929,13 +958,6 @@
/* nothing to do. */
}
-static void hpsa_scsi_setup(struct ctlr_info *h)
-{
- h->ndevices = 0;
- h->scsi_host = NULL;
- spin_lock_init(&h->devlock);
-}
-
static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
{
int i;
@@ -1006,8 +1028,7 @@
pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
}
-static void complete_scsi_command(struct CommandList *cp,
- int timeout, u32 tag)
+static void complete_scsi_command(struct CommandList *cp)
{
struct scsi_cmnd *cmd;
struct ctlr_info *h;
@@ -1308,7 +1329,7 @@
int retry_count = 0;
do {
- memset(c->err_info, 0, sizeof(c->err_info));
+ memset(c->err_info, 0, sizeof(*c->err_info));
hpsa_scsi_do_simple_cmd_core(h, c);
retry_count++;
} while (check_for_unit_attention(h, c) && retry_count <= 3);
@@ -1570,6 +1591,7 @@
"MSA2024",
"MSA2312",
"MSA2324",
+ "P2000 G3 SAS",
NULL,
};
@@ -2751,6 +2773,26 @@
}
}
+static int __devinit hpsa_send_host_reset(struct ctlr_info *h,
+ unsigned char *scsi3addr, u8 reset_type)
+{
+ struct CommandList *c;
+
+ c = cmd_alloc(h);
+ if (!c)
+ return -ENOMEM;
+ fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+ RAID_CTLR_LUNID, TYPE_MSG);
+ c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
+ c->waiting = NULL;
+ enqueue_cmd_and_start_io(h, c);
+ /* Don't wait for completion, the reset won't complete. Don't free
+ * the command either. This is the last command we will send before
+ * re-initializing everything, so it doesn't matter and won't leak.
+ */
+ return 0;
+}
+
static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type)
@@ -2828,7 +2870,8 @@
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_NONE;
c->Request.Timeout = 0; /* Don't time out */
- c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */
+ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+ c->Request.CDB[0] = cmd;
c->Request.CDB[1] = 0x03; /* Reset target above */
/* If bytes 4-7 are zero, it means reset the */
/* LunID device */
@@ -2936,7 +2979,7 @@
{
removeQ(c);
if (likely(c->cmd_type == CMD_SCSI))
- complete_scsi_command(c, 0, raw_tag);
+ complete_scsi_command(c);
else if (c->cmd_type == CMD_IOCTL_PEND)
complete(c->waiting);
}
@@ -2994,6 +3037,63 @@
return next_command(h);
}
+/* Some controllers, like p400, will give us one interrupt
+ * after a soft reset, even if we turned interrupts off.
+ * Only need to check for this in the hpsa_xxx_discard_completions
+ * functions.
+ */
+static int ignore_bogus_interrupt(struct ctlr_info *h)
+{
+ if (likely(!reset_devices))
+ return 0;
+
+ if (likely(h->interrupts_enabled))
+ return 0;
+
+ dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
+ "(known firmware bug.) Ignoring.\n");
+
+ return 1;
+}
+
+static irqreturn_t hpsa_intx_discard_completions(int irq, void *dev_id)
+{
+ struct ctlr_info *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
+
+ if (ignore_bogus_interrupt(h))
+ return IRQ_NONE;
+
+ if (interrupt_not_for_us(h))
+ return IRQ_NONE;
+ spin_lock_irqsave(&h->lock, flags);
+ while (interrupt_pending(h)) {
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY)
+ raw_tag = next_command(h);
+ }
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t hpsa_msix_discard_completions(int irq, void *dev_id)
+{
+ struct ctlr_info *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
+
+ if (ignore_bogus_interrupt(h))
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&h->lock, flags);
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY)
+ raw_tag = next_command(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
+
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id)
{
struct ctlr_info *h = dev_id;
@@ -3132,11 +3232,10 @@
return 0;
}
-#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
#define hpsa_noop(p) hpsa_message(p, 3, 0)
static int hpsa_controller_hard_reset(struct pci_dev *pdev,
- void * __iomem vaddr, bool use_doorbell)
+ void * __iomem vaddr, u32 use_doorbell)
{
u16 pmcsr;
int pos;
@@ -3147,8 +3246,7 @@
* other way using the doorbell register.
*/
dev_info(&pdev->dev, "using doorbell to reset controller\n");
- writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
- msleep(1000);
+ writel(use_doorbell, vaddr + SA5_DOORBELL);
} else { /* Try to do it the PCI power state way */
/* Quoting from the Open CISS Specification: "The Power
@@ -3179,12 +3277,63 @@
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= PCI_D0;
pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
-
- msleep(500);
}
return 0;
}
+static __devinit void init_driver_version(char *driver_version, int len)
+{
+ memset(driver_version, 0, len);
+ strncpy(driver_version, "hpsa " HPSA_DRIVER_VERSION, len - 1);
+}
+
+static __devinit int write_driver_ver_to_cfgtable(
+ struct CfgTable __iomem *cfgtable)
+{
+ char *driver_version;
+ int i, size = sizeof(cfgtable->driver_version);
+
+ driver_version = kmalloc(size, GFP_KERNEL);
+ if (!driver_version)
+ return -ENOMEM;
+
+ init_driver_version(driver_version, size);
+ for (i = 0; i < size; i++)
+ writeb(driver_version[i], &cfgtable->driver_version[i]);
+ kfree(driver_version);
+ return 0;
+}
+
+static __devinit void read_driver_ver_from_cfgtable(
+ struct CfgTable __iomem *cfgtable, unsigned char *driver_ver)
+{
+ int i;
+
+ for (i = 0; i < sizeof(cfgtable->driver_version); i++)
+ driver_ver[i] = readb(&cfgtable->driver_version[i]);
+}
+
+static __devinit int controller_reset_failed(
+ struct CfgTable __iomem *cfgtable)
+{
+
+ char *driver_ver, *old_driver_ver;
+ int rc, size = sizeof(cfgtable->driver_version);
+
+ old_driver_ver = kmalloc(2 * size, GFP_KERNEL);
+ if (!old_driver_ver)
+ return -ENOMEM;
+ driver_ver = old_driver_ver + size;
+
+ /* After a reset, the 32 bytes of "driver version" in the cfgtable
+ * should have been changed, otherwise we know the reset failed.
+ */
+ init_driver_version(old_driver_ver, size);
+ read_driver_ver_from_cfgtable(cfgtable, driver_ver);
+ rc = !memcmp(driver_ver, old_driver_ver, size);
+ kfree(old_driver_ver);
+ return rc;
+}
/* This does a hard reset of the controller using PCI power management
* states or the using the doorbell register.
*/
@@ -3195,10 +3344,10 @@
u64 cfg_base_addr_index;
void __iomem *vaddr;
unsigned long paddr;
- u32 misc_fw_support, active_transport;
+ u32 misc_fw_support;
int rc;
struct CfgTable __iomem *cfgtable;
- bool use_doorbell;
+ u32 use_doorbell;
u32 board_id;
u16 command_register;
@@ -3215,20 +3364,15 @@
* using the doorbell register.
*/
- /* Exclude 640x boards. These are two pci devices in one slot
- * which share a battery backed cache module. One controls the
- * cache, the other accesses the cache through the one that controls
- * it. If we reset the one controlling the cache, the other will
- * likely not be happy. Just forbid resetting this conjoined mess.
- * The 640x isn't really supported by hpsa anyway.
- */
rc = hpsa_lookup_board_id(pdev, &board_id);
- if (rc < 0) {
+ if (rc < 0 || !ctlr_is_resettable(board_id)) {
dev_warn(&pdev->dev, "Not resetting device.\n");
return -ENODEV;
}
- if (board_id == 0x409C0E11 || board_id == 0x409D0E11)
- return -ENOTSUPP;
+
+ /* if controller is soft- but not hard resettable... */
+ if (!ctlr_is_hard_resettable(board_id))
+ return -ENOTSUPP; /* try soft reset later. */
/* Save the PCI command register */
pci_read_config_word(pdev, 4, &command_register);
@@ -3257,10 +3401,28 @@
rc = -ENOMEM;
goto unmap_vaddr;
}
+ rc = write_driver_ver_to_cfgtable(cfgtable);
+ if (rc)
+ goto unmap_vaddr;
- /* If reset via doorbell register is supported, use that. */
+ /* If reset via doorbell register is supported, use that.
+ * There are two such methods. Favor the newest method.
+ */
misc_fw_support = readl(&cfgtable->misc_fw_support);
- use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
+ if (use_doorbell) {
+ use_doorbell = DOORBELL_CTLR_RESET2;
+ } else {
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
+ if (use_doorbell) {
+ dev_warn(&pdev->dev, "Controller claims that "
+ "'Bit 2 doorbell reset' is "
+ "supported, but not 'bit 5 doorbell reset'. "
+ "Firmware update is recommended.\n");
+ rc = -ENOTSUPP; /* try soft reset */
+ goto unmap_cfgtable;
+ }
+ }
rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
if (rc)
@@ -3279,30 +3441,32 @@
msleep(HPSA_POST_RESET_PAUSE_MSECS);
/* Wait for board to become not ready, then ready. */
- dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+ dev_info(&pdev->dev, "Waiting for board to reset.\n");
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
- if (rc)
+ if (rc) {
dev_warn(&pdev->dev,
- "failed waiting for board to become not ready\n");
+ "failed waiting for board to reset."
+ " Will try soft reset.\n");
+ rc = -ENOTSUPP; /* Not expected, but try soft reset later */
+ goto unmap_cfgtable;
+ }
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
if (rc) {
dev_warn(&pdev->dev,
- "failed waiting for board to become ready\n");
+ "failed waiting for board to become ready "
+ "after hard reset\n");
goto unmap_cfgtable;
}
- dev_info(&pdev->dev, "board ready.\n");
- /* Controller should be in simple mode at this point. If it's not,
- * It means we're on one of those controllers which doesn't support
- * the doorbell reset method and on which the PCI power management reset
- * method doesn't work (P800, for example.)
- * In those cases, don't try to proceed, as it generally doesn't work.
- */
- active_transport = readl(&cfgtable->TransportActive);
- if (active_transport & PERFORMANT_MODE) {
- dev_warn(&pdev->dev, "Unable to successfully reset controller,"
- " Ignoring controller.\n");
- rc = -ENODEV;
+ rc = controller_reset_failed(vaddr);
+ if (rc < 0)
+ goto unmap_cfgtable;
+ if (rc) {
+ dev_warn(&pdev->dev, "Unable to successfully reset "
+ "controller. Will try soft reset.\n");
+ rc = -ENOTSUPP;
+ } else {
+ dev_info(&pdev->dev, "board ready after hard reset.\n");
}
unmap_cfgtable:
@@ -3543,6 +3707,9 @@
cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
if (!h->cfgtable)
return -ENOMEM;
+ rc = write_driver_ver_to_cfgtable(h->cfgtable);
+ if (rc)
+ return rc;
/* Find performant mode table. */
trans_offset = readl(&h->cfgtable->TransMethodOffset);
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
@@ -3777,11 +3944,12 @@
* due to concerns about shared bbwc between 6402/6404 pair.
*/
if (rc == -ENOTSUPP)
- return 0; /* just try to do the kdump anyhow. */
+ return rc; /* just try to do the kdump anyhow. */
if (rc)
return -ENODEV;
/* Now try to get the controller to respond to a no-op */
+ dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
if (hpsa_noop(pdev) == 0)
break;
@@ -3792,18 +3960,133 @@
return 0;
}
+static __devinit int hpsa_allocate_cmd_pool(struct ctlr_info *h)
+{
+ h->cmd_pool_bits = kzalloc(
+ DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG) *
+ sizeof(unsigned long), GFP_KERNEL);
+ h->cmd_pool = pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(*h->cmd_pool),
+ &(h->cmd_pool_dhandle));
+ h->errinfo_pool = pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(*h->errinfo_pool),
+ &(h->errinfo_pool_dhandle));
+ if ((h->cmd_pool_bits == NULL)
+ || (h->cmd_pool == NULL)
+ || (h->errinfo_pool == NULL)) {
+ dev_err(&h->pdev->dev, "out of memory in %s", __func__);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void hpsa_free_cmd_pool(struct ctlr_info *h)
+{
+ kfree(h->cmd_pool_bits);
+ if (h->cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct CommandList),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ if (h->errinfo_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct ErrorInfo),
+ h->errinfo_pool,
+ h->errinfo_pool_dhandle);
+}
+
+static int hpsa_request_irq(struct ctlr_info *h,
+ irqreturn_t (*msixhandler)(int, void *),
+ irqreturn_t (*intxhandler)(int, void *))
+{
+ int rc;
+
+ if (h->msix_vector || h->msi_vector)
+ rc = request_irq(h->intr[h->intr_mode], msixhandler,
+ IRQF_DISABLED, h->devname, h);
+ else
+ rc = request_irq(h->intr[h->intr_mode], intxhandler,
+ IRQF_DISABLED, h->devname, h);
+ if (rc) {
+ dev_err(&h->pdev->dev, "unable to get irq %d for %s\n",
+ h->intr[h->intr_mode], h->devname);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int __devinit hpsa_kdump_soft_reset(struct ctlr_info *h)
+{
+ if (hpsa_send_host_reset(h, RAID_CTLR_LUNID,
+ HPSA_RESET_TYPE_CONTROLLER)) {
+ dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");
+ return -EIO;
+ }
+
+ dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
+ if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
+ dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
+ return -1;
+ }
+
+ dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
+ if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {
+ dev_warn(&h->pdev->dev, "Board failed to become ready "
+ "after soft reset.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
+{
+ free_irq(h->intr[h->intr_mode], h);
+#ifdef CONFIG_PCI_MSI
+ if (h->msix_vector)
+ pci_disable_msix(h->pdev);
+ else if (h->msi_vector)
+ pci_disable_msi(h->pdev);
+#endif /* CONFIG_PCI_MSI */
+ hpsa_free_sg_chain_blocks(h);
+ hpsa_free_cmd_pool(h);
+ kfree(h->blockFetchTable);
+ pci_free_consistent(h->pdev, h->reply_pool_size,
+ h->reply_pool, h->reply_pool_dhandle);
+ if (h->vaddr)
+ iounmap(h->vaddr);
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+ pci_release_regions(h->pdev);
+ kfree(h);
+}
+
static int __devinit hpsa_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int dac, rc;
struct ctlr_info *h;
+ int try_soft_reset = 0;
+ unsigned long flags;
if (number_of_controllers == 0)
printk(KERN_INFO DRIVER_NAME "\n");
rc = hpsa_init_reset_devices(pdev);
- if (rc)
- return rc;
+ if (rc) {
+ if (rc != -ENOTSUPP)
+ return rc;
+ /* If the reset fails in a particular way (it has no way to do
+ * a proper hard reset, so returns -ENOTSUPP) we can try to do
+ * a soft reset once we get the controller configured up to the
+ * point that it can accept a command.
+ */
+ try_soft_reset = 1;
+ rc = 0;
+ }
+
+reinit_after_soft_reset:
/* Command structures must be aligned on a 32-byte boundary because
* the 5 lower bits of the address are used by the hardware. and by
@@ -3847,54 +4130,82 @@
/* make sure the board interrupts are off */
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- if (h->msix_vector || h->msi_vector)
- rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_msi,
- IRQF_DISABLED, h->devname, h);
- else
- rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_intx,
- IRQF_DISABLED, h->devname, h);
- if (rc) {
- dev_err(&pdev->dev, "unable to get irq %d for %s\n",
- h->intr[h->intr_mode], h->devname);
+ if (hpsa_request_irq(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
goto clean2;
- }
-
dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
h->devname, pdev->device,
h->intr[h->intr_mode], dac ? "" : " not");
-
- h->cmd_pool_bits =
- kmalloc(((h->nr_cmds + BITS_PER_LONG -
- 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
- h->cmd_pool = pci_alloc_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->cmd_pool),
- &(h->cmd_pool_dhandle));
- h->errinfo_pool = pci_alloc_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->errinfo_pool),
- &(h->errinfo_pool_dhandle));
- if ((h->cmd_pool_bits == NULL)
- || (h->cmd_pool == NULL)
- || (h->errinfo_pool == NULL)) {
- dev_err(&pdev->dev, "out of memory");
- rc = -ENOMEM;
+ if (hpsa_allocate_cmd_pool(h))
goto clean4;
- }
if (hpsa_allocate_sg_chain_blocks(h))
goto clean4;
init_waitqueue_head(&h->scan_wait_queue);
h->scan_finished = 1; /* no scan currently in progress */
pci_set_drvdata(pdev, h);
- memset(h->cmd_pool_bits, 0,
- ((h->nr_cmds + BITS_PER_LONG -
- 1) / BITS_PER_LONG) * sizeof(unsigned long));
+ h->ndevices = 0;
+ h->scsi_host = NULL;
+ spin_lock_init(&h->devlock);
+ hpsa_put_ctlr_into_performant_mode(h);
- hpsa_scsi_setup(h);
+ /* At this point, the controller is ready to take commands.
+ * Now, if reset_devices and the hard reset didn't work, try
+ * the soft reset and see if that works.
+ */
+ if (try_soft_reset) {
+
+ /* This is kind of gross. We may or may not get a completion
+ * from the soft reset command, and if we do, then the value
+ * from the fifo may or may not be valid. So, we wait 10 secs
+ * after the reset throwing away any completions we get during
+ * that time. Unregister the interrupt handler and register
+ * fake ones to scoop up any residual completions.
+ */
+ spin_lock_irqsave(&h->lock, flags);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+ spin_unlock_irqrestore(&h->lock, flags);
+ free_irq(h->intr[h->intr_mode], h);
+ rc = hpsa_request_irq(h, hpsa_msix_discard_completions,
+ hpsa_intx_discard_completions);
+ if (rc) {
+ dev_warn(&h->pdev->dev, "Failed to request_irq after "
+ "soft reset.\n");
+ goto clean4;
+ }
+
+ rc = hpsa_kdump_soft_reset(h);
+ if (rc)
+ /* Neither hard nor soft reset worked, we're hosed. */
+ goto clean4;
+
+ dev_info(&h->pdev->dev, "Board READY.\n");
+ dev_info(&h->pdev->dev,
+ "Waiting for stale completions to drain.\n");
+ h->access.set_intr_mask(h, HPSA_INTR_ON);
+ msleep(10000);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+
+ rc = controller_reset_failed(h->cfgtable);
+ if (rc)
+ dev_info(&h->pdev->dev,
+ "Soft reset appears to have failed.\n");
+
+ /* since the controller's reset, we have to go back and re-init
+ * everything. Easiest to just forget what we've done and do it
+ * all over again.
+ */
+ hpsa_undo_allocations_after_kdump_soft_reset(h);
+ try_soft_reset = 0;
+ if (rc)
+ /* don't go to clean4, we already unallocated */
+ return -ENODEV;
+
+ goto reinit_after_soft_reset;
+ }
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
- hpsa_put_ctlr_into_performant_mode(h);
hpsa_hba_inquiry(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
h->busy_initializing = 0;
@@ -3902,16 +4213,7 @@
clean4:
hpsa_free_sg_chain_blocks(h);
- kfree(h->cmd_pool_bits);
- if (h->cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct CommandList),
- h->cmd_pool, h->cmd_pool_dhandle);
- if (h->errinfo_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct ErrorInfo),
- h->errinfo_pool,
- h->errinfo_pool_dhandle);
+ hpsa_free_cmd_pool(h);
free_irq(h->intr[h->intr_mode], h);
clean2:
clean1:
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 621a153..6d8dcd4 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -127,10 +127,12 @@
};
#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
-#define HPSA_BUS_RESET_MSG 2
-#define HPSA_HOST_RESET_MSG 3
+#define HPSA_RESET_TYPE_CONTROLLER 0x00
+#define HPSA_RESET_TYPE_BUS 0x01
+#define HPSA_RESET_TYPE_TARGET 0x03
+#define HPSA_RESET_TYPE_LUN 0x04
#define HPSA_MSG_SEND_RETRY_LIMIT 10
-#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000
+#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
/* Maximum time in seconds driver will wait for command completions
* when polling before giving up.
@@ -155,7 +157,7 @@
* HPSA_BOARD_READY_ITERATIONS are derived from those.
*/
#define HPSA_BOARD_READY_WAIT_SECS (120)
-#define HPSA_BOARD_NOT_READY_WAIT_SECS (10)
+#define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
#define HPSA_BOARD_READY_POLL_INTERVAL \
((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
@@ -212,6 +214,7 @@
dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
c->Header.Tag.lower);
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+ (void) readl(h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if (h->commands_outstanding > h->max_outstanding)
h->max_outstanding = h->commands_outstanding;
@@ -227,10 +230,12 @@
if (val) { /* Turn interrupts on */
h->interrupts_enabled = 1;
writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
} else { /* Turn them off */
h->interrupts_enabled = 0;
writel(SA5_INTR_OFF,
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
@@ -239,10 +244,12 @@
if (val) { /* turn on interrupts */
h->interrupts_enabled = 1;
writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
} else {
h->interrupts_enabled = 0;
writel(SA5_PERF_INTR_OFF,
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 1846490..55d741b 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -101,6 +101,7 @@
#define CFGTBL_ChangeReq 0x00000001l
#define CFGTBL_AccCmds 0x00000001l
#define DOORBELL_CTLR_RESET 0x00000004l
+#define DOORBELL_CTLR_RESET2 0x00000020l
#define CFGTBL_Trans_Simple 0x00000002l
#define CFGTBL_Trans_Performant 0x00000004l
@@ -256,14 +257,6 @@
#define CMD_IOCTL_PEND 0x01
#define CMD_SCSI 0x03
-/* This structure needs to be divisible by 32 for new
- * indexing method and performant mode.
- */
-#define PAD32 32
-#define PAD64DIFF 0
-#define USEEXTRA ((sizeof(void *) - 4)/4)
-#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA)
-
#define DIRECT_LOOKUP_SHIFT 5
#define DIRECT_LOOKUP_BIT 0x10
#define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
@@ -345,6 +338,8 @@
u8 reserved[0x78 - 0x58];
u32 misc_fw_support; /* offset 0x78 */
#define MISC_FW_DOORBELL_RESET (0x02)
+#define MISC_FW_DOORBELL_RESET2 (0x010)
+ u8 driver_version[32];
};
#define NUM_BLOCKFETCH_ENTRIES 8
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 0419584..3d391dc3 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1849,8 +1849,7 @@
rc = ibmvscsi_ops->reset_crq_queue(&hostdata->queue, hostdata);
if (!rc)
rc = ibmvscsi_ops->send_crq(hostdata, 0xC001000000000000LL, 0);
- if (!rc)
- rc = vio_enable_interrupts(to_vio_dev(hostdata->dev));
+ vio_enable_interrupts(to_vio_dev(hostdata->dev));
} else if (hostdata->reenable_crq) {
smp_rmb();
action = "enable";
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 6568aab..92109b1 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -343,7 +343,7 @@
instance = cmd->device->host;
hostdata = (struct IN2000_hostdata *) instance->hostdata;
- DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->serial_number))
+ DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x(", cmd->cmnd[0]))
/* Set up a few fields in the Scsi_Cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
@@ -427,7 +427,7 @@
in2000_execute(cmd->device->host);
- DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+ DB(DB_QUEUE_COMMAND, printk(")Q "))
return 0;
}
@@ -705,7 +705,7 @@
* to search the input_Q again...
*/
- DB(DB_EXECUTE, printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+ DB(DB_EXECUTE, printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
}
@@ -1149,7 +1149,7 @@
case CSR_XFER_DONE | PHS_COMMAND:
case CSR_UNEXP | PHS_COMMAND:
case CSR_SRV_REQ | PHS_COMMAND:
- DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+ DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
transfer_pio(cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR, hostdata);
hostdata->state = S_CONNECTED;
break;
@@ -1191,7 +1191,7 @@
switch (msg) {
case COMMAND_COMPLETE:
- DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("CCMP"))
write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK);
hostdata->state = S_PRE_CMP_DISC;
break;
@@ -1329,7 +1329,7 @@
write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
if (phs == 0x60) {
- DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("SX-DONE"))
cmd->SCp.Message = COMMAND_COMPLETE;
lun = read_3393(hostdata, WD_TARGET_LUN);
DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1350,7 +1350,7 @@
in2000_execute(instance);
} else {
- printk("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs, cmd->serial_number);
+ printk("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs);
}
break;
@@ -1417,7 +1417,7 @@
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
- DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("UNEXP_DISC"))
hostdata->connected = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
@@ -1442,7 +1442,7 @@
*/
write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
- DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("DISC"))
if (cmd == NULL) {
printk(" - Already disconnected! ");
hostdata->state = S_UNCONNECTED;
@@ -1575,7 +1575,6 @@
} else
hostdata->state = S_CONNECTED;
- DB(DB_INTR, printk("-%ld", cmd->serial_number))
break;
default:
@@ -1704,7 +1703,7 @@
prev->host_scribble = cmd->host_scribble;
cmd->host_scribble = NULL;
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "scsi%d: Abort - removing command %ld from input_Q. ", instance->host_no, cmd->serial_number);
+ printk(KERN_WARNING "scsi%d: Abort - removing command from input_Q. ", instance->host_no);
cmd->scsi_done(cmd);
return SUCCESS;
}
@@ -1725,7 +1724,7 @@
if (hostdata->connected == cmd) {
- printk(KERN_WARNING "scsi%d: Aborting connected command %ld - ", instance->host_no, cmd->serial_number);
+ printk(KERN_WARNING "scsi%d: Aborting connected command - ", instance->host_no);
printk("sending wd33c93 ABORT command - ");
write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
@@ -2270,7 +2269,7 @@
strcat(bp, "\nconnected: ");
if (hd->connected) {
cmd = (Scsi_Cmnd *) hd->connected;
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
@@ -2278,7 +2277,7 @@
strcat(bp, "\ninput_Q: ");
cmd = (Scsi_Cmnd *) hd->input_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (Scsi_Cmnd *) cmd->host_scribble;
}
@@ -2287,7 +2286,7 @@
strcat(bp, "\ndisconnected_Q:");
cmd = (Scsi_Cmnd *) hd->disconnected_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (Scsi_Cmnd *) cmd->host_scribble;
}
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 0621238..12868ca 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -60,6 +60,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pci.h>
@@ -2717,13 +2718,18 @@
unsigned long pci_address, u32 length)
{
int bytes_copied = 0;
- int cur_len, rc, rem_len, rem_page_len;
+ int cur_len, rc, rem_len, rem_page_len, max_dump_size;
__be32 *page;
unsigned long lock_flags = 0;
struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump;
+ if (ioa_cfg->sis64)
+ max_dump_size = IPR_FMT3_MAX_IOA_DUMP_SIZE;
+ else
+ max_dump_size = IPR_FMT2_MAX_IOA_DUMP_SIZE;
+
while (bytes_copied < length &&
- (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) {
+ (ioa_dump->hdr.len + bytes_copied) < max_dump_size) {
if (ioa_dump->page_offset >= PAGE_SIZE ||
ioa_dump->page_offset == 0) {
page = (__be32 *)__get_free_page(GFP_ATOMIC);
@@ -2885,8 +2891,8 @@
unsigned long lock_flags = 0;
struct ipr_driver_dump *driver_dump = &dump->driver_dump;
struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump;
- u32 num_entries, start_off, end_off;
- u32 bytes_to_copy, bytes_copied, rc;
+ u32 num_entries, max_num_entries, start_off, end_off;
+ u32 max_dump_size, bytes_to_copy, bytes_copied, rc;
struct ipr_sdt *sdt;
int valid = 1;
int i;
@@ -2947,8 +2953,18 @@
on entries in this table */
sdt = &ioa_dump->sdt;
+ if (ioa_cfg->sis64) {
+ max_num_entries = IPR_FMT3_NUM_SDT_ENTRIES;
+ max_dump_size = IPR_FMT3_MAX_IOA_DUMP_SIZE;
+ } else {
+ max_num_entries = IPR_FMT2_NUM_SDT_ENTRIES;
+ max_dump_size = IPR_FMT2_MAX_IOA_DUMP_SIZE;
+ }
+
+ bytes_to_copy = offsetof(struct ipr_sdt, entry) +
+ (max_num_entries * sizeof(struct ipr_sdt_entry));
rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt,
- sizeof(struct ipr_sdt) / sizeof(__be32));
+ bytes_to_copy / sizeof(__be32));
/* Smart Dump table is ready to use and the first entry is valid */
if (rc || ((be32_to_cpu(sdt->hdr.state) != IPR_FMT3_SDT_READY_TO_USE) &&
@@ -2964,13 +2980,20 @@
num_entries = be32_to_cpu(sdt->hdr.num_entries_used);
- if (num_entries > IPR_NUM_SDT_ENTRIES)
- num_entries = IPR_NUM_SDT_ENTRIES;
+ if (num_entries > max_num_entries)
+ num_entries = max_num_entries;
+
+ /* Update dump length to the actual data to be copied */
+ dump->driver_dump.hdr.len += sizeof(struct ipr_sdt_header);
+ if (ioa_cfg->sis64)
+ dump->driver_dump.hdr.len += num_entries * sizeof(struct ipr_sdt_entry);
+ else
+ dump->driver_dump.hdr.len += max_num_entries * sizeof(struct ipr_sdt_entry);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
for (i = 0; i < num_entries; i++) {
- if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) {
+ if (ioa_dump->hdr.len > max_dump_size) {
driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
break;
}
@@ -2989,7 +3012,7 @@
valid = 0;
}
if (valid) {
- if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
+ if (bytes_to_copy > max_dump_size) {
sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
continue;
}
@@ -3044,6 +3067,7 @@
for (i = 0; i < dump->ioa_dump.next_page_index; i++)
free_page((unsigned long) dump->ioa_dump.ioa_data[i]);
+ vfree(dump->ioa_dump.ioa_data);
kfree(dump);
LEAVE;
}
@@ -3835,7 +3859,7 @@
struct ipr_dump *dump;
unsigned long lock_flags = 0;
char *src;
- int len;
+ int len, sdt_end;
size_t rc = count;
if (!capable(CAP_SYS_ADMIN))
@@ -3875,9 +3899,17 @@
off -= sizeof(dump->driver_dump);
- if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) {
- if (off + count > offsetof(struct ipr_ioa_dump, ioa_data))
- len = offsetof(struct ipr_ioa_dump, ioa_data) - off;
+ if (ioa_cfg->sis64)
+ sdt_end = offsetof(struct ipr_ioa_dump, sdt.entry) +
+ (be32_to_cpu(dump->ioa_dump.sdt.hdr.num_entries_used) *
+ sizeof(struct ipr_sdt_entry));
+ else
+ sdt_end = offsetof(struct ipr_ioa_dump, sdt.entry) +
+ (IPR_FMT2_NUM_SDT_ENTRIES * sizeof(struct ipr_sdt_entry));
+
+ if (count && off < sdt_end) {
+ if (off + count > sdt_end)
+ len = sdt_end - off;
else
len = count;
src = (u8 *)&dump->ioa_dump + off;
@@ -3887,7 +3919,7 @@
count -= len;
}
- off -= offsetof(struct ipr_ioa_dump, ioa_data);
+ off -= sdt_end;
while (count) {
if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK))
@@ -3916,6 +3948,7 @@
static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
{
struct ipr_dump *dump;
+ __be32 **ioa_data;
unsigned long lock_flags = 0;
dump = kzalloc(sizeof(struct ipr_dump), GFP_KERNEL);
@@ -3925,6 +3958,19 @@
return -ENOMEM;
}
+ if (ioa_cfg->sis64)
+ ioa_data = vmalloc(IPR_FMT3_MAX_NUM_DUMP_PAGES * sizeof(__be32 *));
+ else
+ ioa_data = vmalloc(IPR_FMT2_MAX_NUM_DUMP_PAGES * sizeof(__be32 *));
+
+ if (!ioa_data) {
+ ipr_err("Dump memory allocation failed\n");
+ kfree(dump);
+ return -ENOMEM;
+ }
+
+ dump->ioa_dump.ioa_data = ioa_data;
+
kref_init(&dump->kref);
dump->ioa_cfg = ioa_cfg;
@@ -3932,6 +3978,7 @@
if (INACTIVE != ioa_cfg->sdt_state) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ vfree(dump->ioa_dump.ioa_data);
kfree(dump);
return 0;
}
@@ -4953,9 +5000,35 @@
* IRQ_NONE / IRQ_HANDLED
**/
static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
- volatile u32 int_reg)
+ u32 int_reg)
{
irqreturn_t rc = IRQ_HANDLED;
+ u32 int_mask_reg;
+
+ int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
+ int_reg &= ~int_mask_reg;
+
+ /* If an interrupt on the adapter did not occur, ignore it.
+ * Or in the case of SIS 64, check for a stage change interrupt.
+ */
+ if ((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0) {
+ if (ioa_cfg->sis64) {
+ int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
+
+ /* clear stage change */
+ writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ list_del(&ioa_cfg->reset_cmd->queue);
+ del_timer(&ioa_cfg->reset_cmd->timer);
+ ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+ return IRQ_HANDLED;
+ }
+ }
+
+ return IRQ_NONE;
+ }
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
/* Mask the interrupt */
@@ -4968,6 +5041,13 @@
list_del(&ioa_cfg->reset_cmd->queue);
del_timer(&ioa_cfg->reset_cmd->timer);
ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+ } else if ((int_reg & IPR_PCII_HRRQ_UPDATED) == int_reg) {
+ if (ipr_debug && printk_ratelimit())
+ dev_err(&ioa_cfg->pdev->dev,
+ "Spurious interrupt detected. 0x%08X\n", int_reg);
+ writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
+ return IRQ_NONE;
} else {
if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
ioa_cfg->ioa_unit_checked = 1;
@@ -5016,10 +5096,11 @@
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
unsigned long lock_flags = 0;
- volatile u32 int_reg, int_mask_reg;
+ u32 int_reg = 0;
u32 ioasc;
u16 cmd_index;
int num_hrrq = 0;
+ int irq_none = 0;
struct ipr_cmnd *ipr_cmd;
irqreturn_t rc = IRQ_NONE;
@@ -5031,33 +5112,6 @@
return IRQ_NONE;
}
- int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
-
- /* If an interrupt on the adapter did not occur, ignore it.
- * Or in the case of SIS 64, check for a stage change interrupt.
- */
- if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
- if (ioa_cfg->sis64) {
- int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
- if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
-
- /* clear stage change */
- writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
- list_del(&ioa_cfg->reset_cmd->queue);
- del_timer(&ioa_cfg->reset_cmd->timer);
- ipr_reset_ioa_job(ioa_cfg->reset_cmd);
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- return IRQ_HANDLED;
- }
- }
-
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- return IRQ_NONE;
- }
-
while (1) {
ipr_cmd = NULL;
@@ -5097,7 +5151,7 @@
/* Clear the PCI interrupt */
do {
writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
} while (int_reg & IPR_PCII_HRRQ_UPDATED &&
num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
@@ -5107,6 +5161,9 @@
return IRQ_HANDLED;
}
+ } else if (rc == IRQ_NONE && irq_none == 0) {
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
+ irq_none++;
} else
break;
}
@@ -5143,7 +5200,8 @@
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
- dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
+ if (printk_ratelimit())
+ dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
return -1;
}
@@ -5773,7 +5831,8 @@
}
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
- ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
+ if (ipr_is_gscsi(res))
+ ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
}
@@ -7516,7 +7575,7 @@
static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
- volatile u32 int_reg;
+ u32 int_reg;
ENTER;
ioa_cfg->pdev->state_saved = true;
@@ -7555,7 +7614,10 @@
ipr_cmd->job_step = ipr_reset_enable_ioa;
if (GET_DUMP == ioa_cfg->sdt_state) {
- ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT);
+ if (ioa_cfg->sis64)
+ ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
+ else
+ ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
ipr_cmd->job_step = ipr_reset_wait_for_dump;
schedule_work(&ioa_cfg->work_q);
return IPR_RC_JOB_RETURN;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 13f425f..f93f863 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -38,8 +38,8 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.5.1"
-#define IPR_DRIVER_DATE "(August 10, 2010)"
+#define IPR_DRIVER_VERSION "2.5.2"
+#define IPR_DRIVER_DATE "(April 27, 2011)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -217,7 +217,8 @@
#define IPR_CHECK_FOR_RESET_TIMEOUT (HZ / 10)
#define IPR_WAIT_FOR_BIST_TIMEOUT (2 * HZ)
#define IPR_PCI_RESET_TIMEOUT (HZ / 2)
-#define IPR_DUMP_TIMEOUT (15 * HZ)
+#define IPR_SIS32_DUMP_TIMEOUT (15 * HZ)
+#define IPR_SIS64_DUMP_TIMEOUT (40 * HZ)
#define IPR_DUMP_DELAY_SECONDS 4
#define IPR_DUMP_DELAY_TIMEOUT (IPR_DUMP_DELAY_SECONDS * HZ)
@@ -285,9 +286,12 @@
/*
* Dump literals
*/
-#define IPR_MAX_IOA_DUMP_SIZE (4 * 1024 * 1024)
-#define IPR_NUM_SDT_ENTRIES 511
-#define IPR_MAX_NUM_DUMP_PAGES ((IPR_MAX_IOA_DUMP_SIZE / PAGE_SIZE) + 1)
+#define IPR_FMT2_MAX_IOA_DUMP_SIZE (4 * 1024 * 1024)
+#define IPR_FMT3_MAX_IOA_DUMP_SIZE (32 * 1024 * 1024)
+#define IPR_FMT2_NUM_SDT_ENTRIES 511
+#define IPR_FMT3_NUM_SDT_ENTRIES 0xFFF
+#define IPR_FMT2_MAX_NUM_DUMP_PAGES ((IPR_FMT2_MAX_IOA_DUMP_SIZE / PAGE_SIZE) + 1)
+#define IPR_FMT3_MAX_NUM_DUMP_PAGES ((IPR_FMT3_MAX_IOA_DUMP_SIZE / PAGE_SIZE) + 1)
/*
* Misc literals
@@ -474,7 +478,7 @@
u8 flags_lo;
#define IPR_FLAGS_LO_ALIGNED_BFR 0x20
-#define IPR_FLAGS_LO_DELAY_AFTER_RST 0x10
+#define IPR_FLAGS_LO_DELAY_AFTER_RST 0x10
#define IPR_FLAGS_LO_UNTAGGED_TASK 0x00
#define IPR_FLAGS_LO_SIMPLE_TASK 0x02
#define IPR_FLAGS_LO_ORDERED_TASK 0x04
@@ -1164,7 +1168,7 @@
struct ipr_sdt {
struct ipr_sdt_header hdr;
- struct ipr_sdt_entry entry[IPR_NUM_SDT_ENTRIES];
+ struct ipr_sdt_entry entry[IPR_FMT3_NUM_SDT_ENTRIES];
}__attribute__((packed, aligned (4)));
struct ipr_uc_sdt {
@@ -1608,7 +1612,7 @@
struct ipr_ioa_dump {
struct ipr_dump_entry_header hdr;
struct ipr_sdt sdt;
- __be32 *ioa_data[IPR_MAX_NUM_DUMP_PAGES];
+ __be32 **ioa_data;
u32 reserved;
u32 next_page_index;
u32 page_offset;
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 5b799a3..2a3a472 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -57,9 +57,6 @@
#define FC_SRB_READ (1 << 1)
#define FC_SRB_WRITE (1 << 0)
-/* constant added to e_d_tov timeout to get rec_tov value */
-#define REC_TOV_CONST 1
-
/*
* The SCp.ptr should be tested and set under the scsi_pkt_queue lock
*/
@@ -248,7 +245,7 @@
/**
* fc_fcp_timer_set() - Start a timer for a fcp_pkt
* @fsp: The FCP packet to start a timer for
- * @delay: The timeout period for the timer
+ * @delay: The timeout period in jiffies
*/
static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
{
@@ -335,22 +332,23 @@
/**
* fc_fcp_can_queue_ramp_up() - increases can_queue
* @lport: lport to ramp up can_queue
- *
- * Locking notes: Called with Scsi_Host lock held
*/
static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
{
struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+ unsigned long flags;
int can_queue;
+ spin_lock_irqsave(lport->host->host_lock, flags);
+
if (si->last_can_queue_ramp_up_time &&
(time_before(jiffies, si->last_can_queue_ramp_up_time +
FC_CAN_QUEUE_PERIOD)))
- return;
+ goto unlock;
if (time_before(jiffies, si->last_can_queue_ramp_down_time +
FC_CAN_QUEUE_PERIOD))
- return;
+ goto unlock;
si->last_can_queue_ramp_up_time = jiffies;
@@ -362,6 +360,9 @@
lport->host->can_queue = can_queue;
shost_printk(KERN_ERR, lport->host, "libfc: increased "
"can_queue to %d.\n", can_queue);
+
+unlock:
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
}
/**
@@ -373,18 +374,19 @@
* commands complete or timeout, then try again with a reduced
* can_queue. Eventually we will hit the point where we run
* on all reserved structs.
- *
- * Locking notes: Called with Scsi_Host lock held
*/
static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
{
struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+ unsigned long flags;
int can_queue;
+ spin_lock_irqsave(lport->host->host_lock, flags);
+
if (si->last_can_queue_ramp_down_time &&
(time_before(jiffies, si->last_can_queue_ramp_down_time +
FC_CAN_QUEUE_PERIOD)))
- return;
+ goto unlock;
si->last_can_queue_ramp_down_time = jiffies;
@@ -395,6 +397,9 @@
lport->host->can_queue = can_queue;
shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
"Reducing can_queue to %d.\n", can_queue);
+
+unlock:
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
}
/*
@@ -409,16 +414,13 @@
size_t len)
{
struct fc_frame *fp;
- unsigned long flags;
fp = fc_frame_alloc(lport, len);
if (likely(fp))
return fp;
/* error case */
- spin_lock_irqsave(lport->host->host_lock, flags);
fc_fcp_can_queue_ramp_down(lport);
- spin_unlock_irqrestore(lport->host->host_lock, flags);
return NULL;
}
@@ -1093,16 +1095,14 @@
/**
* get_fsp_rec_tov() - Helper function to get REC_TOV
* @fsp: the FCP packet
+ *
+ * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
*/
static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
{
- struct fc_rport *rport;
- struct fc_rport_libfc_priv *rpriv;
+ struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
- rport = fsp->rport;
- rpriv = rport->dd_data;
-
- return rpriv->e_d_tov + REC_TOV_CONST;
+ return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
}
/**
@@ -1122,7 +1122,6 @@
struct fc_rport_libfc_priv *rpriv;
const size_t len = sizeof(fsp->cdb_cmd);
int rc = 0;
- unsigned int rec_tov;
if (fc_fcp_lock_pkt(fsp))
return 0;
@@ -1153,12 +1152,9 @@
fsp->seq_ptr = seq;
fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */
- rec_tov = get_fsp_rec_tov(fsp);
-
setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
-
if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
- fc_fcp_timer_set(fsp, rec_tov);
+ fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
unlock:
fc_fcp_unlock_pkt(fsp);
@@ -1235,16 +1231,14 @@
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
struct fc_lport *lport = fsp->lp;
- unsigned int rec_tov;
if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
return;
if (fc_fcp_lock_pkt(fsp))
return;
- rec_tov = get_fsp_rec_tov(fsp);
setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
- fc_fcp_timer_set(fsp, rec_tov);
+ fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
fc_fcp_unlock_pkt(fsp);
}
}
@@ -1536,12 +1530,11 @@
}
fc_fcp_srr(fsp, r_ctl, offset);
} else if (e_stat & ESB_ST_SEQ_INIT) {
- unsigned int rec_tov = get_fsp_rec_tov(fsp);
/*
* The remote port has the initiative, so just
* keep waiting for it to complete.
*/
- fc_fcp_timer_set(fsp, rec_tov);
+ fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
} else {
/*
@@ -1705,7 +1698,6 @@
{
struct fc_fcp_pkt *fsp = arg;
struct fc_frame_header *fh;
- unsigned int rec_tov;
if (IS_ERR(fp)) {
fc_fcp_srr_error(fsp, fp);
@@ -1732,8 +1724,7 @@
switch (fc_frame_payload_op(fp)) {
case ELS_LS_ACC:
fsp->recov_retry = 0;
- rec_tov = get_fsp_rec_tov(fsp);
- fc_fcp_timer_set(fsp, rec_tov);
+ fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
break;
case ELS_LS_RJT:
default:
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 906bbca..389ab80 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1590,7 +1590,6 @@
*/
int fc_lport_config(struct fc_lport *lport)
{
- INIT_LIST_HEAD(&lport->ema_list);
INIT_DELAYED_WORK(&lport->retry_work, fc_lport_timeout);
mutex_init(&lport->lp_mutex);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 60e98a62..02d53d8 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -805,6 +805,8 @@
struct dentry *idiag_root;
struct dentry *idiag_pci_cfg;
struct dentry *idiag_que_info;
+ struct dentry *idiag_que_acc;
+ struct dentry *idiag_drb_acc;
#endif
/* Used for deferred freeing of ELS data buffers */
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 77b2871..37e2a12 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2426,6 +2426,7 @@
{
struct bsg_job_data *dd_data;
struct fc_bsg_job *job;
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
uint32_t size;
unsigned long flags;
uint8_t *to;
@@ -2469,9 +2470,8 @@
memcpy(to, from, size);
} else if ((phba->sli_rev == LPFC_SLI_REV4) &&
(pmboxq->u.mb.mbxCommand == MBX_SLI4_CONFIG)) {
- struct lpfc_mbx_nembed_cmd *nembed_sge =
- (struct lpfc_mbx_nembed_cmd *)
- &pmboxq->u.mb.un.varWords[0];
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &pmboxq->u.mb.un.varWords[0];
from = (uint8_t *)dd_data->context_un.mbox.dmp->dma.
virt;
@@ -2496,16 +2496,18 @@
job->reply_payload.sg_cnt,
from, size);
job->reply->result = 0;
-
+ /* need to hold the lock until we set job->dd_data to NULL
+ * to hold off the timeout handler returning to the mid-layer
+ * while we are still processing the job.
+ */
job->dd_data = NULL;
+ dd_data->context_un.mbox.set_job = NULL;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
job->job_done(job);
+ } else {
+ dd_data->context_un.mbox.set_job = NULL;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
}
- dd_data->context_un.mbox.set_job = NULL;
- /* need to hold the lock until we call job done to hold off
- * the timeout handler returning to the midlayer while
- * we are stillprocessing the job
- */
- spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
kfree(dd_data->context_un.mbox.mb);
mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool);
@@ -2644,6 +2646,11 @@
struct ulp_bde64 *rxbpl = NULL;
struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *)
job->request->rqst_data.h_vendor.vendor_cmd;
+ struct READ_EVENT_LOG_VAR *rdEventLog;
+ uint32_t transmit_length, receive_length, mode;
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
+ struct mbox_header *header;
+ struct ulp_bde64 *bde;
uint8_t *ext = NULL;
int rc = 0;
uint8_t *from;
@@ -2651,9 +2658,16 @@
/* in case no data is transferred */
job->reply->reply_payload_rcv_len = 0;
+ /* sanity check to protect driver */
+ if (job->reply_payload.payload_len > BSG_MBOX_SIZE ||
+ job->request_payload.payload_len > BSG_MBOX_SIZE) {
+ rc = -ERANGE;
+ goto job_done;
+ }
+
/* check if requested extended data lengths are valid */
- if ((mbox_req->inExtWLen > MAILBOX_EXT_SIZE) ||
- (mbox_req->outExtWLen > MAILBOX_EXT_SIZE)) {
+ if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) ||
+ (mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) {
rc = -ERANGE;
goto job_done;
}
@@ -2744,8 +2758,8 @@
* use ours
*/
if (pmb->mbxCommand == MBX_RUN_BIU_DIAG64) {
- uint32_t transmit_length = pmb->un.varWords[1];
- uint32_t receive_length = pmb->un.varWords[4];
+ transmit_length = pmb->un.varWords[1];
+ receive_length = pmb->un.varWords[4];
/* transmit length cannot be greater than receive length or
* mailbox extension size
*/
@@ -2795,10 +2809,9 @@
from += sizeof(MAILBOX_t);
memcpy((uint8_t *)dmp->dma.virt, from, transmit_length);
} else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) {
- struct READ_EVENT_LOG_VAR *rdEventLog =
- &pmb->un.varRdEventLog ;
- uint32_t receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
- uint32_t mode = bf_get(lpfc_event_log, rdEventLog);
+ rdEventLog = &pmb->un.varRdEventLog;
+ receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
+ mode = bf_get(lpfc_event_log, rdEventLog);
/* receive length cannot be greater than mailbox
* extension size
@@ -2843,7 +2856,7 @@
/* rebuild the command for sli4 using our own buffers
* like we do for biu diags
*/
- uint32_t receive_length = pmb->un.varWords[2];
+ receive_length = pmb->un.varWords[2];
/* receive length cannot be greater than mailbox
* extension size
*/
@@ -2879,8 +2892,7 @@
pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys);
} else if ((pmb->mbxCommand == MBX_UPDATE_CFG) &&
pmb->un.varUpdateCfg.co) {
- struct ulp_bde64 *bde =
- (struct ulp_bde64 *)&pmb->un.varWords[4];
+ bde = (struct ulp_bde64 *)&pmb->un.varWords[4];
/* bde size cannot be greater than mailbox ext size */
if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) {
@@ -2921,10 +2933,6 @@
memcpy((uint8_t *)dmp->dma.virt, from,
bde->tus.f.bdeSize);
} else if (pmb->mbxCommand == MBX_SLI4_CONFIG) {
- struct lpfc_mbx_nembed_cmd *nembed_sge;
- struct mbox_header *header;
- uint32_t receive_length;
-
/* rebuild the command for sli4 using our own buffers
* like we do for biu diags
*/
@@ -3386,6 +3394,7 @@
job->dd_data = NULL;
return rc;
}
+
/**
* lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job
* @job: fc_bsg_job to handle
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h
index a2c33e7..b542aca 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.h
+++ b/drivers/scsi/lpfc/lpfc_bsg.h
@@ -109,3 +109,133 @@
uint32_t xri; /* return the xri of the iocb exchange */
};
+/*
+ * macros and data structures for handling sli-config mailbox command
+ * pass-through support, this header file is shared between user and
+ * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h,
+ * with macro names prefixed with bsg_, as the macros defined in
+ * lpfc_hw4.h are not accessible from user space.
+ */
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ * struct temp {
+ * uint32_t field1;
+ * uint32_t field2;
+ * uint32_t field3;
+ * uint32_t field4;
+ * #define example_bit_field_SHIFT 7
+ * #define example_bit_field_MASK 0x03
+ * #define example_bit_field_WORD field4
+ * uint32_t field5;
+ * };
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ * struct temp t1;
+ * value = bsg_bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ * bsg_bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ * bsg_bf_set(example_bit_field, &t1, 0);
+ */
+#define bsg_bf_get_le32(name, ptr) \
+ ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
+#define bsg_bf_get(name, ptr) \
+ (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bsg_bf_set_le32(name, ptr, value) \
+ ((ptr)->name##_WORD = cpu_to_le32(((((value) & \
+ name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \
+ ~(name##_MASK << name##_SHIFT)))))
+#define bsg_bf_set(name, ptr, value) \
+ ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+ ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+/*
+ * The sli_config structure specified here is based on the following
+ * restriction:
+ *
+ * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without
+ * carrying HBD.
+ * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or
+ * without carrying HBDs.
+ */
+
+struct lpfc_sli_config_mse {
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+ uint32_t buf_len;
+#define lpfc_mbox_sli_config_mse_len_SHIFT 0
+#define lpfc_mbox_sli_config_mse_len_MASK 0xffffff
+#define lpfc_mbox_sli_config_mse_len_WORD buf_len
+};
+
+struct lpfc_sli_config_subcmd_hbd {
+ uint32_t buf_len;
+#define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0
+#define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff
+#define lpfc_mbox_sli_config_ecmn_hbd_len_WORD buf_len
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+};
+
+struct lpfc_sli_config_hdr {
+ uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT 0
+#define lpfc_mbox_hdr_emb_MASK 0x00000001
+#define lpfc_mbox_hdr_emb_WORD word1
+#define lpfc_mbox_hdr_mse_cnt_SHIFT 3
+#define lpfc_mbox_hdr_mse_cnt_MASK 0x0000001f
+#define lpfc_mbox_hdr_mse_cnt_WORD word1
+ uint32_t payload_length;
+ uint32_t tag_lo;
+ uint32_t tag_hi;
+ uint32_t reserved5;
+};
+
+struct lpfc_sli_config_generic {
+ struct lpfc_sli_config_hdr sli_config_hdr;
+#define LPFC_MBX_SLI_CONFIG_MAX_MSE 19
+ struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
+};
+
+struct lpfc_sli_config_subcmnd {
+ struct lpfc_sli_config_hdr sli_config_hdr;
+ uint32_t word6;
+#define lpfc_subcmnd_opcode_SHIFT 0
+#define lpfc_subcmnd_opcode_MASK 0xff
+#define lpfc_subcmnd_opcode_WORD word6
+#define lpfc_subcmnd_subsys_SHIFT 8
+#define lpfc_subcmnd_subsys_MASK 0xff
+#define lpfc_subcmnd_subsys_WORD word6
+ uint32_t timeout;
+ uint32_t request_length;
+ uint32_t word9;
+#define lpfc_subcmnd_version_SHIFT 0
+#define lpfc_subcmnd_version_MASK 0xff
+#define lpfc_subcmnd_version_WORD word9
+ uint32_t word10;
+#define lpfc_subcmnd_ask_rd_len_SHIFT 0
+#define lpfc_subcmnd_ask_rd_len_MASK 0xffffff
+#define lpfc_subcmnd_ask_rd_len_WORD word10
+ uint32_t rd_offset;
+ uint32_t obj_name[26];
+ uint32_t hbd_count;
+#define LPFC_MBX_SLI_CONFIG_MAX_HBD 10
+ struct lpfc_sli_config_subcmd_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
+};
+
+struct lpfc_sli_config_mbox {
+ uint32_t word0;
+#define lpfc_mqe_status_SHIFT 16
+#define lpfc_mqe_status_MASK 0x0000FFFF
+#define lpfc_mqe_status_WORD word0
+#define lpfc_mqe_command_SHIFT 8
+#define lpfc_mqe_command_MASK 0x000000FF
+#define lpfc_mqe_command_WORD word0
+ union {
+ struct lpfc_sli_config_generic sli_config_generic;
+ struct lpfc_sli_config_subcmnd sli_config_subcmnd;
+ } un;
+};
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 3d96774..c93fca0 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1119,172 +1119,14 @@
}
/*
+ * ---------------------------------
* iDiag debugfs file access methods
- */
-
-/*
- * iDiag PCI config space register access methods:
+ * ---------------------------------
*
- * The PCI config space register accessees of read, write, read-modify-write
- * for set bits, and read-modify-write for clear bits to SLI4 PCI functions
- * are provided. In the proper SLI4 PCI function's debugfs iDiag directory,
+ * All access methods are through the proper SLI4 PCI function's debugfs
+ * iDiag directory:
*
- * /sys/kernel/debug/lpfc/fn<#>/iDiag
- *
- * the access is through the debugfs entry pciCfg:
- *
- * 1. For PCI config space register read access, there are two read methods:
- * A) read a single PCI config space register in the size of a byte
- * (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through
- * the 4K extended PCI config space.
- *
- * A) Read a single PCI config space register consists of two steps:
- *
- * Step-1: Set up PCI config space register read command, the command
- * syntax is,
- *
- * echo 1 <where> <count> > pciCfg
- *
- * where, 1 is the iDiag command for PCI config space read, <where> is the
- * offset from the beginning of the device's PCI config space to read from,
- * and <count> is the size of PCI config space register data to read back,
- * it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits
- * or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes).
- *
- * Setp-2: Perform the debugfs read operation to execute the idiag command
- * set up in Step-1,
- *
- * cat pciCfg
- *
- * Examples:
- * To read PCI device's vendor-id and device-id from PCI config space,
- *
- * echo 1 0 4 > pciCfg
- * cat pciCfg
- *
- * To read PCI device's currnt command from config space,
- *
- * echo 1 4 2 > pciCfg
- * cat pciCfg
- *
- * B) Browse through the entire 4K extended PCI config space also consists
- * of two steps:
- *
- * Step-1: Set up PCI config space register browsing command, the command
- * syntax is,
- *
- * echo 1 0 4096 > pciCfg
- *
- * where, 1 is the iDiag command for PCI config space read, 0 must be used
- * as the offset for PCI config space register browse, and 4096 must be
- * used as the count for PCI config space register browse.
- *
- * Step-2: Repeately issue the debugfs read operation to browse through
- * the entire PCI config space registers:
- *
- * cat pciCfg
- * cat pciCfg
- * cat pciCfg
- * ...
- *
- * When browsing to the end of the 4K PCI config space, the browse method
- * shall wrap around to start reading from beginning again, and again...
- *
- * 2. For PCI config space register write access, it supports a single PCI
- * config space register write in the size of a byte (8 bits), a word
- * (16 bits), or a dword (32 bits). The command syntax is,
- *
- * echo 2 <where> <count> <value> > pciCfg
- *
- * where, 2 is the iDiag command for PCI config space write, <where> is
- * the offset from the beginning of the device's PCI config space to write
- * into, <count> is the size of data to write into the PCI config space,
- * it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits
- * or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value>
- * is the data to be written into the PCI config space register at the
- * offset.
- *
- * Examples:
- * To disable PCI device's interrupt assertion,
- *
- * 1) Read in device's PCI config space register command field <cmd>:
- *
- * echo 1 4 2 > pciCfg
- * cat pciCfg
- *
- * 2) Set bit 10 (Interrupt Disable bit) in the <cmd>:
- *
- * <cmd> = <cmd> | (1 < 10)
- *
- * 3) Write the modified command back:
- *
- * echo 2 4 2 <cmd> > pciCfg
- *
- * 3. For PCI config space register set bits access, it supports a single PCI
- * config space register set bits in the size of a byte (8 bits), a word
- * (16 bits), or a dword (32 bits). The command syntax is,
- *
- * echo 3 <where> <count> <bitmask> > pciCfg
- *
- * where, 3 is the iDiag command for PCI config space set bits, <where> is
- * the offset from the beginning of the device's PCI config space to set
- * bits into, <count> is the size of the bitmask to set into the PCI config
- * space, it will be 1 for setting a byte (8 bits), 2 for setting a word
- * (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and
- * <bitmask> is the bitmask, indicating the bits to be set into the PCI
- * config space register at the offset. The logic performed to the content
- * of the PCI config space register, regval, is,
- *
- * regval |= <bitmask>
- *
- * 4. For PCI config space register clear bits access, it supports a single
- * PCI config space register clear bits in the size of a byte (8 bits),
- * a word (16 bits), or a dword (32 bits). The command syntax is,
- *
- * echo 4 <where> <count> <bitmask> > pciCfg
- *
- * where, 4 is the iDiag command for PCI config space clear bits, <where>
- * is the offset from the beginning of the device's PCI config space to
- * clear bits from, <count> is the size of the bitmask to set into the PCI
- * config space, it will be 1 for setting a byte (8 bits), 2 for setting
- * a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4
- * bytes), and <bitmask> is the bitmask, indicating the bits to be cleared
- * from the PCI config space register at the offset. the logic performed
- * to the content of the PCI config space register, regval, is,
- *
- * regval &= ~<bitmask>
- *
- * Note, for all single register read, write, set bits, or clear bits access,
- * the offset (<where>) must be aligned with the size of the data:
- *
- * For data size of byte (8 bits), the offset must be aligned to the byte
- * boundary; for data size of word (16 bits), the offset must be aligned
- * to the word boundary; while for data size of dword (32 bits), the offset
- * must be aligned to the dword boundary. Otherwise, the interface will
- * return the error:
- *
- * "-bash: echo: write error: Invalid argument".
- *
- * For example:
- *
- * echo 1 2 4 > pciCfg
- * -bash: echo: write error: Invalid argument
- *
- * Note also, all of the numbers in the command fields for all read, write,
- * set bits, and clear bits PCI config space register command fields can be
- * either decimal or hex.
- *
- * For example,
- * echo 1 0 4096 > pciCfg
- *
- * will be the same as
- * echo 1 0 0x1000 > pciCfg
- *
- * And,
- * echo 2 155 1 10 > pciCfg
- *
- * will be
- * echo 2 0x9b 1 0xa > pciCfg
+ * /sys/kernel/debug/lpfc/fn<#>/iDiag
*/
/**
@@ -1331,10 +1173,10 @@
for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
step_str = strsep(&pbuf, "\t ");
if (!step_str)
- return 0;
+ return i;
idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
}
- return 0;
+ return i;
}
/**
@@ -1403,7 +1245,7 @@
* Description:
* This routine frees the buffer that was allocated when the debugfs file
* was opened. It also reset the fields in the idiag command struct in the
- * case the command is not continuous browsing of the data structure.
+ * case of command for write operation.
*
* Returns:
* This function returns zero.
@@ -1413,18 +1255,20 @@
{
struct lpfc_debug *debug = file->private_data;
- /* Read PCI config register, if not read all, clear command fields */
- if ((debug->op == LPFC_IDIAG_OP_RD) &&
- (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD))
- if ((idiag.cmd.data[1] == sizeof(uint8_t)) ||
- (idiag.cmd.data[1] == sizeof(uint16_t)) ||
- (idiag.cmd.data[1] == sizeof(uint32_t)))
+ if (debug->op == LPFC_IDIAG_OP_WR) {
+ switch (idiag.cmd.opcode) {
+ case LPFC_IDIAG_CMD_PCICFG_WR:
+ case LPFC_IDIAG_CMD_PCICFG_ST:
+ case LPFC_IDIAG_CMD_PCICFG_CL:
+ case LPFC_IDIAG_CMD_QUEACC_WR:
+ case LPFC_IDIAG_CMD_QUEACC_ST:
+ case LPFC_IDIAG_CMD_QUEACC_CL:
memset(&idiag, 0, sizeof(idiag));
-
- /* Write PCI config register, clear command fields */
- if ((debug->op == LPFC_IDIAG_OP_WR) &&
- (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR))
- memset(&idiag, 0, sizeof(idiag));
+ break;
+ default:
+ break;
+ }
+ }
/* Free the buffers to the file operation */
kfree(debug->buffer);
@@ -1504,7 +1348,7 @@
len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
"%03x: %08x\n", where, u32val);
break;
- case LPFC_PCI_CFG_SIZE: /* browse all */
+ case LPFC_PCI_CFG_BROWSE: /* browse all */
goto pcicfg_browse;
break;
default:
@@ -1586,16 +1430,21 @@
debug->op = LPFC_IDIAG_OP_WR;
rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
- if (rc)
+ if (rc < 0)
return rc;
if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+ /* Sanity check on PCI config read command line arguments */
+ if (rc != LPFC_PCI_CFG_RD_CMD_ARG)
+ goto error_out;
/* Read command from PCI config space, set up command fields */
where = idiag.cmd.data[0];
count = idiag.cmd.data[1];
- if (count == LPFC_PCI_CFG_SIZE) {
- if (where != 0)
+ if (count == LPFC_PCI_CFG_BROWSE) {
+ if (where % sizeof(uint32_t))
goto error_out;
+ /* Starting offset to browse */
+ idiag.offset.last_rd = where;
} else if ((count != sizeof(uint8_t)) &&
(count != sizeof(uint16_t)) &&
(count != sizeof(uint32_t)))
@@ -1621,6 +1470,9 @@
} else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR ||
idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST ||
idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+ /* Sanity check on PCI config write command line arguments */
+ if (rc != LPFC_PCI_CFG_WR_CMD_ARG)
+ goto error_out;
/* Write command to PCI config space, read-modify-write */
where = idiag.cmd.data[0];
count = idiag.cmd.data[1];
@@ -1753,10 +1605,12 @@
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
"Slow-path EQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], EQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tEQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.sp_eq->queue_id,
phba->sli4_hba.sp_eq->entry_count,
+ phba->sli4_hba.sp_eq->entry_size,
phba->sli4_hba.sp_eq->host_index,
phba->sli4_hba.sp_eq->hba_index);
@@ -1765,10 +1619,12 @@
"Fast-path EQ information:\n");
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], EQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tEQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.fp_eq[fcp_qidx]->queue_id,
phba->sli4_hba.fp_eq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fp_eq[fcp_qidx]->entry_size,
phba->sli4_hba.fp_eq[fcp_qidx]->host_index,
phba->sli4_hba.fp_eq[fcp_qidx]->hba_index);
}
@@ -1776,89 +1632,101 @@
/* Get mailbox complete queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Mailbox CQ information:\n");
+ "Slow-path MBX CQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated EQ-ID [%02d]:\n",
+ "Associated EQID[%02d]:\n",
phba->sli4_hba.mbx_cq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], CQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tCQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.mbx_cq->queue_id,
phba->sli4_hba.mbx_cq->entry_count,
+ phba->sli4_hba.mbx_cq->entry_size,
phba->sli4_hba.mbx_cq->host_index,
phba->sli4_hba.mbx_cq->hba_index);
/* Get slow-path complete queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Slow-path CQ information:\n");
+ "Slow-path ELS CQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated EQ-ID [%02d]:\n",
+ "Associated EQID[%02d]:\n",
phba->sli4_hba.els_cq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], CQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tCQID [%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.els_cq->queue_id,
phba->sli4_hba.els_cq->entry_count,
+ phba->sli4_hba.els_cq->entry_size,
phba->sli4_hba.els_cq->host_index,
phba->sli4_hba.els_cq->hba_index);
/* Get fast-path complete queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Fast-path CQ information:\n");
+ "Fast-path FCP CQ information:\n");
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated EQ-ID [%02d]:\n",
+ "Associated EQID[%02d]:\n",
phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], EQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
- phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
- phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
- phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
- phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
+ "\tCQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
+ phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
}
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
/* Get mailbox queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Mailbox MQ information:\n");
+ "Slow-path MBX MQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.mbx_wq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], MQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tWQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.mbx_wq->queue_id,
phba->sli4_hba.mbx_wq->entry_count,
+ phba->sli4_hba.mbx_wq->entry_size,
phba->sli4_hba.mbx_wq->host_index,
phba->sli4_hba.mbx_wq->hba_index);
/* Get slow-path work queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Slow-path WQ information:\n");
+ "Slow-path ELS WQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.els_wq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], WQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tWQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.els_wq->queue_id,
phba->sli4_hba.els_wq->entry_count,
+ phba->sli4_hba.els_wq->entry_size,
phba->sli4_hba.els_wq->host_index,
phba->sli4_hba.els_wq->hba_index);
/* Get fast-path work queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Fast-path WQ information:\n");
+ "Fast-path FCP WQ information:\n");
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) {
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], WQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tWQID[%02d], "
+ "QE-COUNT[%04d], WQE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id,
phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fcp_wq[fcp_qidx]->entry_size,
phba->sli4_hba.fcp_wq[fcp_qidx]->host_index,
phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index);
}
@@ -1868,26 +1736,597 @@
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
"Slow-path RQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.hdr_rq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], RHQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tHQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.hdr_rq->queue_id,
phba->sli4_hba.hdr_rq->entry_count,
+ phba->sli4_hba.hdr_rq->entry_size,
phba->sli4_hba.hdr_rq->host_index,
phba->sli4_hba.hdr_rq->hba_index);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], RDQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tDQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.dat_rq->queue_id,
phba->sli4_hba.dat_rq->entry_count,
+ phba->sli4_hba.dat_rq->entry_size,
phba->sli4_hba.dat_rq->host_index,
phba->sli4_hba.dat_rq->hba_index);
return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}
+/**
+ * lpfc_idiag_que_param_check - queue access command parameter sanity check
+ * @q: The pointer to queue structure.
+ * @index: The index into a queue entry.
+ * @count: The number of queue entries to access.
+ *
+ * Description:
+ * The routine performs sanity check on device queue access method commands.
+ *
+ * Returns:
+ * This function returns -EINVAL when fails the sanity check, otherwise, it
+ * returns 0.
+ **/
+static int
+lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count)
+{
+ /* Only support single entry read or browsing */
+ if ((count != 1) && (count != LPFC_QUE_ACC_BROWSE))
+ return -EINVAL;
+ if (index > q->entry_count - 1)
+ return -EINVAL;
+ return 0;
+}
+
+/**
+ * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index
+ * @pbuffer: The pointer to buffer to copy the read data into.
+ * @pque: The pointer to the queue to be read.
+ * @index: The index into the queue entry.
+ *
+ * Description:
+ * This routine reads out a single entry from the given queue's index location
+ * and copies it into the buffer provided.
+ *
+ * Returns:
+ * This function returns 0 when it fails, otherwise, it returns the length of
+ * the data read into the buffer provided.
+ **/
+static int
+lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque,
+ uint32_t index)
+{
+ int offset, esize;
+ uint32_t *pentry;
+
+ if (!pbuffer || !pque)
+ return 0;
+
+ esize = pque->entry_size;
+ len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
+ "QE-INDEX[%04d]:\n", index);
+
+ offset = 0;
+ pentry = pque->qe[index].address;
+ while (esize > 0) {
+ len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
+ "%08x ", *pentry);
+ pentry++;
+ offset += sizeof(uint32_t);
+ esize -= sizeof(uint32_t);
+ if (esize > 0 && !(offset % (4 * sizeof(uint32_t))))
+ len += snprintf(pbuffer+len,
+ LPFC_QUE_ACC_BUF_SIZE-len, "\n");
+ }
+ len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, "\n");
+
+ return len;
+}
+
+/**
+ * lpfc_idiag_queacc_read - idiag debugfs read port queue
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba device queue memory according to the
+ * idiag command, and copies to user @buf. Depending on the queue dump read
+ * command setup, it does either a single queue entry read or browing through
+ * all entries of the queue.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_queacc_read(struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ uint32_t last_index, index, count;
+ struct lpfc_queue *pque = NULL;
+ char *pbuffer;
+ int len = 0;
+
+ /* This is a user read operation */
+ debug->op = LPFC_IDIAG_OP_RD;
+
+ if (!debug->buffer)
+ debug->buffer = kmalloc(LPFC_QUE_ACC_BUF_SIZE, GFP_KERNEL);
+ if (!debug->buffer)
+ return 0;
+ pbuffer = debug->buffer;
+
+ if (*ppos)
+ return 0;
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+ index = idiag.cmd.data[2];
+ count = idiag.cmd.data[3];
+ pque = (struct lpfc_queue *)idiag.ptr_private;
+ } else
+ return 0;
+
+ /* Browse the queue starting from index */
+ if (count == LPFC_QUE_ACC_BROWSE)
+ goto que_browse;
+
+ /* Read a single entry from the queue */
+ len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+
+que_browse:
+
+ /* Browse all entries from the queue */
+ last_index = idiag.offset.last_rd;
+ index = last_index;
+
+ while (len < LPFC_QUE_ACC_SIZE - pque->entry_size) {
+ len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
+ index++;
+ if (index > pque->entry_count - 1)
+ break;
+ }
+
+ /* Set up the offset for next portion of pci cfg read */
+ if (index > pque->entry_count - 1)
+ index = 0;
+ idiag.offset.last_rd = index;
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_queacc_write - Syntax check and set up idiag queacc commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and then
+ * perform the syntax check for port queue read (dump) or write (set) command
+ * accordingly. In the case of port queue read command, it sets up the command
+ * in the idiag command struct for the following debugfs read operation. In
+ * the case of port queue write operation, it executes the write operation
+ * into the port queue entry accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ **/
+static ssize_t
+lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t qidx, quetp, queid, index, count, offset, value;
+ uint32_t *pentry;
+ struct lpfc_queue *pque;
+ int rc;
+
+ /* This is a user write operation */
+ debug->op = LPFC_IDIAG_OP_WR;
+
+ rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+ if (rc < 0)
+ return rc;
+
+ /* Get and sanity check on command feilds */
+ quetp = idiag.cmd.data[0];
+ queid = idiag.cmd.data[1];
+ index = idiag.cmd.data[2];
+ count = idiag.cmd.data[3];
+ offset = idiag.cmd.data[4];
+ value = idiag.cmd.data[5];
+
+ /* Sanity check on command line arguments */
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
+ if (rc != LPFC_QUE_ACC_WR_CMD_ARG)
+ goto error_out;
+ if (count != 1)
+ goto error_out;
+ } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+ if (rc != LPFC_QUE_ACC_RD_CMD_ARG)
+ goto error_out;
+ } else
+ goto error_out;
+
+ switch (quetp) {
+ case LPFC_IDIAG_EQ:
+ /* Slow-path event queue */
+ if (phba->sli4_hba.sp_eq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.sp_eq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.sp_eq;
+ goto pass_check;
+ }
+ /* Fast-path event queue */
+ for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+ if (phba->sli4_hba.fp_eq[qidx]->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.fp_eq[qidx],
+ index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.fp_eq[qidx];
+ goto pass_check;
+ }
+ }
+ goto error_out;
+ break;
+ case LPFC_IDIAG_CQ:
+ /* MBX complete queue */
+ if (phba->sli4_hba.mbx_cq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.mbx_cq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.mbx_cq;
+ goto pass_check;
+ }
+ /* ELS complete queue */
+ if (phba->sli4_hba.els_cq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.els_cq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.els_cq;
+ goto pass_check;
+ }
+ /* FCP complete queue */
+ for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+ if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.fcp_cq[qidx],
+ index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private =
+ phba->sli4_hba.fcp_cq[qidx];
+ goto pass_check;
+ }
+ }
+ goto error_out;
+ break;
+ case LPFC_IDIAG_MQ:
+ /* MBX work queue */
+ if (phba->sli4_hba.mbx_wq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.mbx_wq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.mbx_wq;
+ goto pass_check;
+ }
+ break;
+ case LPFC_IDIAG_WQ:
+ /* ELS work queue */
+ if (phba->sli4_hba.els_wq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.els_wq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.els_wq;
+ goto pass_check;
+ }
+ /* FCP work queue */
+ for (qidx = 0; qidx < phba->cfg_fcp_wq_count; qidx++) {
+ if (phba->sli4_hba.fcp_wq[qidx]->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.fcp_wq[qidx],
+ index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private =
+ phba->sli4_hba.fcp_wq[qidx];
+ goto pass_check;
+ }
+ }
+ goto error_out;
+ break;
+ case LPFC_IDIAG_RQ:
+ /* HDR queue */
+ if (phba->sli4_hba.hdr_rq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.hdr_rq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.hdr_rq;
+ goto pass_check;
+ }
+ /* DAT queue */
+ if (phba->sli4_hba.dat_rq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.dat_rq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.dat_rq;
+ goto pass_check;
+ }
+ goto error_out;
+ break;
+ default:
+ goto error_out;
+ break;
+ }
+
+pass_check:
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+ if (count == LPFC_QUE_ACC_BROWSE)
+ idiag.offset.last_rd = index;
+ }
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
+ /* Additional sanity checks on write operation */
+ pque = (struct lpfc_queue *)idiag.ptr_private;
+ if (offset > pque->entry_size/sizeof(uint32_t) - 1)
+ goto error_out;
+ pentry = pque->qe[index].address;
+ pentry += offset;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR)
+ *pentry = value;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST)
+ *pentry |= value;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL)
+ *pentry &= ~value;
+ }
+ return nbytes;
+
+error_out:
+ /* Clean out command structure on command error out */
+ memset(&idiag, 0, sizeof(idiag));
+ return -EINVAL;
+}
+
+/**
+ * lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register
+ * @phba: The pointer to hba structure.
+ * @pbuffer: The pointer to the buffer to copy the data to.
+ * @len: The lenght of bytes to copied.
+ * @drbregid: The id to doorbell registers.
+ *
+ * Description:
+ * This routine reads a doorbell register and copies its content to the
+ * user buffer pointed to by @pbuffer.
+ *
+ * Returns:
+ * This function returns the amount of data that was copied into @pbuffer.
+ **/
+static int
+lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
+ int len, uint32_t drbregid)
+{
+
+ if (!pbuffer)
+ return 0;
+
+ switch (drbregid) {
+ case LPFC_DRB_EQCQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "EQCQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.EQCQDBregaddr));
+ break;
+ case LPFC_DRB_MQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "MQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.MQDBregaddr));
+ break;
+ case LPFC_DRB_WQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "WQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.WQDBregaddr));
+ break;
+ case LPFC_DRB_RQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "RQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.RQDBregaddr));
+ break;
+ default:
+ break;
+ }
+
+ return len;
+}
+
+/**
+ * lpfc_idiag_drbacc_read - idiag debugfs read port doorbell
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba device doorbell register according
+ * to the idiag command, and copies to user @buf. Depending on the doorbell
+ * register read command setup, it does either a single doorbell register
+ * read or dump all doorbell registers.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_drbacc_read(struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t drb_reg_id, i;
+ char *pbuffer;
+ int len = 0;
+
+ /* This is a user read operation */
+ debug->op = LPFC_IDIAG_OP_RD;
+
+ if (!debug->buffer)
+ debug->buffer = kmalloc(LPFC_DRB_ACC_BUF_SIZE, GFP_KERNEL);
+ if (!debug->buffer)
+ return 0;
+ pbuffer = debug->buffer;
+
+ if (*ppos)
+ return 0;
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD)
+ drb_reg_id = idiag.cmd.data[0];
+ else
+ return 0;
+
+ if (drb_reg_id == LPFC_DRB_ACC_ALL)
+ for (i = 1; i <= LPFC_DRB_MAX; i++)
+ len = lpfc_idiag_drbacc_read_reg(phba,
+ pbuffer, len, i);
+ else
+ len = lpfc_idiag_drbacc_read_reg(phba,
+ pbuffer, len, drb_reg_id);
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_drbacc_write - Syntax check and set up idiag drbacc commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and then
+ * perform the syntax check for port doorbell register read (dump) or write
+ * (set) command accordingly. In the case of port queue read command, it sets
+ * up the command in the idiag command struct for the following debugfs read
+ * operation. In the case of port doorbell register write operation, it
+ * executes the write operation into the port doorbell register accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ **/
+static ssize_t
+lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t drb_reg_id, value, reg_val;
+ void __iomem *drb_reg;
+ int rc;
+
+ /* This is a user write operation */
+ debug->op = LPFC_IDIAG_OP_WR;
+
+ rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+ if (rc < 0)
+ return rc;
+
+ /* Sanity check on command line arguments */
+ drb_reg_id = idiag.cmd.data[0];
+ value = idiag.cmd.data[1];
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+ if (rc != LPFC_DRB_ACC_WR_CMD_ARG)
+ goto error_out;
+ if (drb_reg_id > LPFC_DRB_MAX)
+ goto error_out;
+ } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) {
+ if (rc != LPFC_DRB_ACC_RD_CMD_ARG)
+ goto error_out;
+ if ((drb_reg_id > LPFC_DRB_MAX) &&
+ (drb_reg_id != LPFC_DRB_ACC_ALL))
+ goto error_out;
+ } else
+ goto error_out;
+
+ /* Perform the write access operation */
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+ switch (drb_reg_id) {
+ case LPFC_DRB_EQCQ:
+ drb_reg = phba->sli4_hba.EQCQDBregaddr;
+ break;
+ case LPFC_DRB_MQ:
+ drb_reg = phba->sli4_hba.MQDBregaddr;
+ break;
+ case LPFC_DRB_WQ:
+ drb_reg = phba->sli4_hba.WQDBregaddr;
+ break;
+ case LPFC_DRB_RQ:
+ drb_reg = phba->sli4_hba.RQDBregaddr;
+ break;
+ default:
+ goto error_out;
+ }
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR)
+ reg_val = value;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST) {
+ reg_val = readl(drb_reg);
+ reg_val |= value;
+ }
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+ reg_val = readl(drb_reg);
+ reg_val &= ~value;
+ }
+ writel(reg_val, drb_reg);
+ readl(drb_reg); /* flush */
+ }
+ return nbytes;
+
+error_out:
+ /* Clean out command structure on command error out */
+ memset(&idiag, 0, sizeof(idiag));
+ return -EINVAL;
+}
+
#undef lpfc_debugfs_op_disc_trc
static const struct file_operations lpfc_debugfs_op_disc_trc = {
.owner = THIS_MODULE,
@@ -1986,6 +2425,26 @@
.release = lpfc_idiag_release,
};
+#undef lpfc_idiag_op_queacc
+static const struct file_operations lpfc_idiag_op_queAcc = {
+ .owner = THIS_MODULE,
+ .open = lpfc_idiag_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_idiag_queacc_read,
+ .write = lpfc_idiag_queacc_write,
+ .release = lpfc_idiag_cmd_release,
+};
+
+#undef lpfc_idiag_op_drbacc
+static const struct file_operations lpfc_idiag_op_drbAcc = {
+ .owner = THIS_MODULE,
+ .open = lpfc_idiag_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_idiag_drbacc_read,
+ .write = lpfc_idiag_drbacc_write,
+ .release = lpfc_idiag_cmd_release,
+};
+
#endif
/**
@@ -2261,6 +2720,32 @@
}
}
+ /* iDiag access PCI function queue */
+ snprintf(name, sizeof(name), "queAcc");
+ if (!phba->idiag_que_acc) {
+ phba->idiag_que_acc =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->idiag_root, phba, &lpfc_idiag_op_queAcc);
+ if (!phba->idiag_que_acc) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2926 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ }
+
+ /* iDiag access PCI function doorbell registers */
+ snprintf(name, sizeof(name), "drbAcc");
+ if (!phba->idiag_drb_acc) {
+ phba->idiag_drb_acc =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->idiag_root, phba, &lpfc_idiag_op_drbAcc);
+ if (!phba->idiag_drb_acc) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2927 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ }
+
debug_failed:
return;
#endif
@@ -2339,6 +2824,16 @@
* iDiag release
*/
if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (phba->idiag_drb_acc) {
+ /* iDiag drbAcc */
+ debugfs_remove(phba->idiag_drb_acc);
+ phba->idiag_drb_acc = NULL;
+ }
+ if (phba->idiag_que_acc) {
+ /* iDiag queAcc */
+ debugfs_remove(phba->idiag_que_acc);
+ phba->idiag_que_acc = NULL;
+ }
if (phba->idiag_que_info) {
/* iDiag queInfo */
debugfs_remove(phba->idiag_que_info);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 91b9a94..6525a5e 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -39,13 +39,42 @@
/* hbqinfo output buffer size */
#define LPFC_HBQINFO_SIZE 8192
-/* rdPciConf output buffer size */
+/* pciConf */
+#define LPFC_PCI_CFG_BROWSE 0xffff
+#define LPFC_PCI_CFG_RD_CMD_ARG 2
+#define LPFC_PCI_CFG_WR_CMD_ARG 3
#define LPFC_PCI_CFG_SIZE 4096
#define LPFC_PCI_CFG_RD_BUF_SIZE (LPFC_PCI_CFG_SIZE/2)
#define LPFC_PCI_CFG_RD_SIZE (LPFC_PCI_CFG_SIZE/4)
-/* queue info output buffer size */
-#define LPFC_QUE_INFO_GET_BUF_SIZE 2048
+/* queue info */
+#define LPFC_QUE_INFO_GET_BUF_SIZE 4096
+
+/* queue acc */
+#define LPFC_QUE_ACC_BROWSE 0xffff
+#define LPFC_QUE_ACC_RD_CMD_ARG 4
+#define LPFC_QUE_ACC_WR_CMD_ARG 6
+#define LPFC_QUE_ACC_BUF_SIZE 4096
+#define LPFC_QUE_ACC_SIZE (LPFC_QUE_ACC_BUF_SIZE/2)
+
+#define LPFC_IDIAG_EQ 1
+#define LPFC_IDIAG_CQ 2
+#define LPFC_IDIAG_MQ 3
+#define LPFC_IDIAG_WQ 4
+#define LPFC_IDIAG_RQ 5
+
+/* doorbell acc */
+#define LPFC_DRB_ACC_ALL 0xffff
+#define LPFC_DRB_ACC_RD_CMD_ARG 1
+#define LPFC_DRB_ACC_WR_CMD_ARG 2
+#define LPFC_DRB_ACC_BUF_SIZE 256
+
+#define LPFC_DRB_EQCQ 1
+#define LPFC_DRB_MQ 2
+#define LPFC_DRB_WQ 3
+#define LPFC_DRB_RQ 4
+
+#define LPFC_DRB_MAX 4
#define SIZE_U8 sizeof(uint8_t)
#define SIZE_U16 sizeof(uint16_t)
@@ -73,13 +102,23 @@
uint32_t last_rd;
};
-#define LPFC_IDIAG_CMD_DATA_SIZE 4
+#define LPFC_IDIAG_CMD_DATA_SIZE 8
struct lpfc_idiag_cmd {
uint32_t opcode;
#define LPFC_IDIAG_CMD_PCICFG_RD 0x00000001
#define LPFC_IDIAG_CMD_PCICFG_WR 0x00000002
#define LPFC_IDIAG_CMD_PCICFG_ST 0x00000003
#define LPFC_IDIAG_CMD_PCICFG_CL 0x00000004
+
+#define LPFC_IDIAG_CMD_QUEACC_RD 0x00000011
+#define LPFC_IDIAG_CMD_QUEACC_WR 0x00000012
+#define LPFC_IDIAG_CMD_QUEACC_ST 0x00000013
+#define LPFC_IDIAG_CMD_QUEACC_CL 0x00000014
+
+#define LPFC_IDIAG_CMD_DRBACC_RD 0x00000021
+#define LPFC_IDIAG_CMD_DRBACC_WR 0x00000022
+#define LPFC_IDIAG_CMD_DRBACC_ST 0x00000023
+#define LPFC_IDIAG_CMD_DRBACC_CL 0x00000024
uint32_t data[LPFC_IDIAG_CMD_DATA_SIZE];
};
@@ -87,6 +126,7 @@
uint32_t active;
struct lpfc_idiag_cmd cmd;
struct lpfc_idiag_offset offset;
+ void *ptr_private;
};
#endif
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index d34b69f..e2c4524 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -670,6 +670,7 @@
* Driver needs to re-reg VPI in order for f/w
* to update the MAC address.
*/
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
lpfc_register_new_vport(phba, vport, ndlp);
return 0;
}
@@ -869,8 +870,8 @@
*/
if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
(phba->fcf.fcf_flag & FCF_DISCOVERY) &&
- (irsp->ulpStatus != IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] != IOERR_SLI_ABORTED)) {
+ !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) {
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
"2611 FLOGI failed on FCF (x%x), "
"status:x%x/x%x, tmo:x%x, perform "
@@ -1085,14 +1086,15 @@
if (sp->cmn.fcphHigh < FC_PH3)
sp->cmn.fcphHigh = FC_PH3;
- if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
- LPFC_SLI_INTF_IF_TYPE_0)) {
- elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
- elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
- /* FLOGI needs to be 3 for WQE FCFI */
- /* Set the fcfi to the fcfi we registered with */
- elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_IF_TYPE_0) {
+ elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+ elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+ /* FLOGI needs to be 3 for WQE FCFI */
+ /* Set the fcfi to the fcfi we registered with */
+ elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+ }
} else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
sp->cmn.request_multiple_Nport = 1;
/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
@@ -4107,13 +4109,13 @@
pcmd += sizeof(uint32_t);
rrq = (struct RRQ *)pcmd;
rrq->rrq_exchg = be32_to_cpu(rrq->rrq_exchg);
- rxid = be16_to_cpu(bf_get(rrq_rxid, rrq));
+ rxid = bf_get(rrq_rxid, rrq);
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"2883 Clear RRQ for SID:x%x OXID:x%x RXID:x%x"
" x%x x%x\n",
be32_to_cpu(bf_get(rrq_did, rrq)),
- be16_to_cpu(bf_get(rrq_oxid, rrq)),
+ bf_get(rrq_oxid, rrq),
rxid,
iocb->iotag, iocb->iocb.ulpContext);
@@ -4121,7 +4123,7 @@
"Clear RRQ: did:x%x flg:x%x exchg:x%.08x",
ndlp->nlp_DID, ndlp->nlp_flag, rrq->rrq_exchg);
if (vport->fc_myDID == be32_to_cpu(bf_get(rrq_did, rrq)))
- xri = be16_to_cpu(bf_get(rrq_oxid, rrq));
+ xri = bf_get(rrq_oxid, rrq);
else
xri = rxid;
prrq = lpfc_get_active_rrq(vport, xri, ndlp->nlp_DID);
@@ -7290,8 +7292,9 @@
struct lpfc_vport *vport = cmdiocb->vport;
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
- ndlp = (struct lpfc_nodelist *)cmdiocb->context1;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ ndlp = (struct lpfc_nodelist *)cmdiocb->context1;
irsp = &rspiocb->iocb;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"LOGO npiv cmpl: status:x%x/x%x did:x%x",
@@ -7302,6 +7305,19 @@
/* Trigger the release of the ndlp after logo */
lpfc_nlp_put(ndlp);
+
+ /* NPIV LOGO completes to NPort <nlp_DID> */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+ "2928 NPIV LOGO completes to NPort x%x "
+ "Data: x%x x%x x%x x%x\n",
+ ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
+ irsp->ulpTimeout, vport->num_disc_nodes);
+
+ if (irsp->ulpStatus == IOSTAT_SUCCESS) {
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_FABRIC;
+ spin_unlock_irq(shost->host_lock);
+ }
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 3014983..7a35df5 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -3569,6 +3569,10 @@
"rport add: did:x%x flg:x%x type x%x",
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
+ /* Don't add the remote port if unloading. */
+ if (vport->load_flag & FC_UNLOADING)
+ return;
+
ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids);
if (!rport || !get_device(&rport->dev)) {
dev_printk(KERN_WARNING, &phba->pcidev->dev,
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 8433ac0..4dff668 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1059,6 +1059,11 @@
#define lpfc_rq_context_rqe_size_SHIFT 8 /* Version 1 Only */
#define lpfc_rq_context_rqe_size_MASK 0x0000000F
#define lpfc_rq_context_rqe_size_WORD word0
+#define LPFC_RQE_SIZE_8 2
+#define LPFC_RQE_SIZE_16 3
+#define LPFC_RQE_SIZE_32 4
+#define LPFC_RQE_SIZE_64 5
+#define LPFC_RQE_SIZE_128 6
#define lpfc_rq_context_page_size_SHIFT 0 /* Version 1 Only */
#define lpfc_rq_context_page_size_MASK 0x000000FF
#define lpfc_rq_context_page_size_WORD word0
@@ -2108,6 +2113,8 @@
#define sgl_pp_align_WORD word12
uint32_t rsvd_13_63[51];
};
+#define SLI4_PAGE_ALIGN(addr) (((addr)+((SLI4_PAGE_SIZE)-1)) \
+ &(~((SLI4_PAGE_SIZE)-1)))
struct lpfc_sli4_parameters {
uint32_t word0;
@@ -2491,6 +2498,9 @@
#define wqe_reqtag_SHIFT 0
#define wqe_reqtag_MASK 0x0000FFFF
#define wqe_reqtag_WORD word9
+#define wqe_temp_rpi_SHIFT 16
+#define wqe_temp_rpi_MASK 0x0000FFFF
+#define wqe_temp_rpi_WORD word9
#define wqe_rcvoxid_SHIFT 16
#define wqe_rcvoxid_MASK 0x0000FFFF
#define wqe_rcvoxid_WORD word9
@@ -2524,7 +2534,7 @@
#define wqe_wqes_WORD word10
/* Note that this field overlaps above fields */
#define wqe_wqid_SHIFT 1
-#define wqe_wqid_MASK 0x0000007f
+#define wqe_wqid_MASK 0x00007fff
#define wqe_wqid_WORD word10
#define wqe_pri_SHIFT 16
#define wqe_pri_MASK 0x00000007
@@ -2621,7 +2631,11 @@
uint32_t rsvd4;
struct wqe_did wqe_dest;
struct wqe_common wqe_com; /* words 6-11 */
- uint32_t rsvd_12_15[4];
+ uint32_t word12;
+#define wqe_rsp_temp_rpi_SHIFT 0
+#define wqe_rsp_temp_rpi_MASK 0x0000FFFF
+#define wqe_rsp_temp_rpi_WORD word12
+ uint32_t rsvd_13_15[3];
};
struct xmit_bls_rsp64_wqe {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 505f884..7dda036 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3209,9 +3209,9 @@
phba->sli4_hba.link_state.logical_speed =
bf_get(lpfc_acqe_logical_link_speed, acqe_link);
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2900 Async FCoE Link event - Speed:%dGBit duplex:x%x "
- "LA Type:x%x Port Type:%d Port Number:%d Logical "
- "speed:%dMbps Fault:%d\n",
+ "2900 Async FC/FCoE Link event - Speed:%dGBit "
+ "duplex:x%x LA Type:x%x Port Type:%d Port Number:%d "
+ "Logical speed:%dMbps Fault:%d\n",
phba->sli4_hba.link_state.speed,
phba->sli4_hba.link_state.topology,
phba->sli4_hba.link_state.status,
@@ -4906,6 +4906,7 @@
uint16_t rpi_limit, curr_rpi_range;
struct lpfc_dmabuf *dmabuf;
struct lpfc_rpi_hdr *rpi_hdr;
+ uint32_t rpi_count;
rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
phba->sli4_hba.max_cfg_param.max_rpi - 1;
@@ -4920,7 +4921,9 @@
* and to allow the full max_rpi range per port.
*/
if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
- return NULL;
+ rpi_count = rpi_limit - curr_rpi_range;
+ else
+ rpi_count = LPFC_RPI_HDR_COUNT;
/*
* First allocate the protocol header region for the port. The
@@ -4961,7 +4964,7 @@
* The next_rpi stores the next module-64 rpi value to post
* in any subsequent rpi memory region postings.
*/
- phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+ phba->sli4_hba.next_rpi += rpi_count;
spin_unlock_irq(&phba->hbalock);
return rpi_hdr;
@@ -7004,7 +7007,8 @@
lpfc_sli4_bar0_register_memmap(phba, if_type);
}
- if (pci_resource_start(pdev, 2)) {
+ if ((if_type == LPFC_SLI_INTF_IF_TYPE_0) &&
+ (pci_resource_start(pdev, 2))) {
/*
* Map SLI4 if type 0 HBA Control Register base to a kernel
* virtual address and setup the registers.
@@ -7021,7 +7025,8 @@
lpfc_sli4_bar1_register_memmap(phba);
}
- if (pci_resource_start(pdev, 4)) {
+ if ((if_type == LPFC_SLI_INTF_IF_TYPE_0) &&
+ (pci_resource_start(pdev, 4))) {
/*
* Map SLI4 if type 0 HBA Doorbell Register base to a kernel
* virtual address and setup the registers.
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index fbab973..e6ce903 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1736,7 +1736,7 @@
}
/* Setup for the none-embedded mbox command */
- pcount = (PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
+ pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
/* Allocate record for keeping SGE virtual addresses */
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index fe7cc84..84e4481 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3238,9 +3238,8 @@
if (!lpfc_cmd) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"2873 SCSI Layer I/O Abort Request IO CMPL Status "
- "x%x ID %d "
- "LUN %d snum %#lx\n", ret, cmnd->device->id,
- cmnd->device->lun, cmnd->serial_number);
+ "x%x ID %d LUN %d\n",
+ ret, cmnd->device->id, cmnd->device->lun);
return SUCCESS;
}
@@ -3318,16 +3317,15 @@
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0748 abort handler timed out waiting "
"for abort to complete: ret %#x, ID %d, "
- "LUN %d, snum %#lx\n",
- ret, cmnd->device->id, cmnd->device->lun,
- cmnd->serial_number);
+ "LUN %d\n",
+ ret, cmnd->device->id, cmnd->device->lun);
}
out:
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0749 SCSI Layer I/O Abort Request Status x%x ID %d "
- "LUN %d snum %#lx\n", ret, cmnd->device->id,
- cmnd->device->lun, cmnd->serial_number);
+ "LUN %d\n", ret, cmnd->device->id,
+ cmnd->device->lun);
return ret;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dacabbe..837d272 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4769,8 +4769,7 @@
else
phba->hba_flag &= ~HBA_FIP_SUPPORT;
- if (phba->sli_rev != LPFC_SLI_REV4 ||
- !(phba->hba_flag & HBA_FCOE_MODE)) {
+ if (phba->sli_rev != LPFC_SLI_REV4) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0376 READ_REV Error. SLI Level %d "
"FCoE enabled %d\n",
@@ -5018,10 +5017,11 @@
lpfc_reg_fcfi(phba, mboxq);
mboxq->vport = phba->pport;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- if (rc == MBX_SUCCESS)
- rc = 0;
- else
+ if (rc != MBX_SUCCESS)
goto out_unset_queue;
+ rc = 0;
+ phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi,
+ &mboxq->u.mqe.un.reg_fcfi);
}
/*
* The port is ready, set the host's link state to LINK_DOWN
@@ -6402,6 +6402,7 @@
uint32_t els_id = LPFC_ELS_ID_DEFAULT;
int numBdes, i;
struct ulp_bde64 bde;
+ struct lpfc_nodelist *ndlp;
fip = phba->hba_flag & HBA_FIP_SUPPORT;
/* The fcp commands will set command type */
@@ -6447,6 +6448,7 @@
switch (iocbq->iocb.ulpCommand) {
case CMD_ELS_REQUEST64_CR:
+ ndlp = (struct lpfc_nodelist *)iocbq->context1;
if (!iocbq->iocb.ulpLe) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2007 Only Limited Edition cmd Format"
@@ -6472,6 +6474,7 @@
els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK)
>> LPFC_FIP_ELS_ID_SHIFT);
}
+ bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, ndlp->nlp_rpi);
bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id);
bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1);
bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ);
@@ -6604,6 +6607,7 @@
command_type = OTHER_COMMAND;
break;
case CMD_XMIT_ELS_RSP64_CX:
+ ndlp = (struct lpfc_nodelist *)iocbq->context1;
/* words0-2 BDE memcpy */
/* word3 iocb=iotag32 wqe=response_payload_len */
wqe->xmit_els_rsp.response_payload_len = xmit_len;
@@ -6626,6 +6630,7 @@
bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com,
LPFC_WQE_LENLOC_WORD3);
bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0);
+ bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, ndlp->nlp_rpi);
command_type = OTHER_COMMAND;
break;
case CMD_CLOSE_XRI_CN:
@@ -10522,8 +10527,8 @@
bf_set(lpfc_mbox_hdr_version, &shdr->request,
phba->sli4_hba.pc_sli4_params.cqv);
if (phba->sli4_hba.pc_sli4_params.cqv == LPFC_Q_CREATE_VERSION_2) {
- bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request,
- (PAGE_SIZE/SLI4_PAGE_SIZE));
+ /* FW only supports 1. Should be PAGE_SIZE/SLI4_PAGE_SIZE */
+ bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request, 1);
bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
eq->queue_id);
} else {
@@ -10967,6 +10972,12 @@
&rq_create->u.request.context,
hrq->entry_count);
rq_create->u.request.context.buffer_size = LPFC_HDR_BUF_SIZE;
+ bf_set(lpfc_rq_context_rqe_size,
+ &rq_create->u.request.context,
+ LPFC_RQE_SIZE_8);
+ bf_set(lpfc_rq_context_page_size,
+ &rq_create->u.request.context,
+ (PAGE_SIZE/SLI4_PAGE_SIZE));
} else {
switch (hrq->entry_count) {
default:
@@ -11042,9 +11053,12 @@
phba->sli4_hba.pc_sli4_params.rqv);
if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
bf_set(lpfc_rq_context_rqe_count_1,
- &rq_create->u.request.context,
- hrq->entry_count);
+ &rq_create->u.request.context, hrq->entry_count);
rq_create->u.request.context.buffer_size = LPFC_DATA_BUF_SIZE;
+ bf_set(lpfc_rq_context_rqe_size, &rq_create->u.request.context,
+ LPFC_RQE_SIZE_8);
+ bf_set(lpfc_rq_context_page_size, &rq_create->u.request.context,
+ (PAGE_SIZE/SLI4_PAGE_SIZE));
} else {
switch (drq->entry_count) {
default:
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 2404d1d..c03921b 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.22"
+#define LPFC_DRIVER_VERSION "8.3.23"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index f2684dd..5c17764 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1469,8 +1469,8 @@
if( scb->state & SCB_ABORT ) {
printk(KERN_WARNING
- "megaraid: aborted cmd %lx[%x] complete.\n",
- scb->cmd->serial_number, scb->idx);
+ "megaraid: aborted cmd [%x] complete.\n",
+ scb->idx);
scb->cmd->result = (DID_ABORT << 16);
@@ -1488,8 +1488,8 @@
if( scb->state & SCB_RESET ) {
printk(KERN_WARNING
- "megaraid: reset cmd %lx[%x] complete.\n",
- scb->cmd->serial_number, scb->idx);
+ "megaraid: reset cmd [%x] complete.\n",
+ scb->idx);
scb->cmd->result = (DID_RESET << 16);
@@ -1958,8 +1958,8 @@
struct list_head *pos, *next;
scb_t *scb;
- printk(KERN_WARNING "megaraid: %s-%lx cmd=%x <c=%d t=%d l=%d>\n",
- (aor == SCB_ABORT)? "ABORTING":"RESET", cmd->serial_number,
+ printk(KERN_WARNING "megaraid: %s cmd=%x <c=%d t=%d l=%d>\n",
+ (aor == SCB_ABORT)? "ABORTING":"RESET",
cmd->cmnd[0], cmd->device->channel,
cmd->device->id, cmd->device->lun);
@@ -1983,9 +1983,9 @@
if( scb->state & SCB_ISSUED ) {
printk(KERN_WARNING
- "megaraid: %s-%lx[%x], fw owner.\n",
+ "megaraid: %s[%x], fw owner.\n",
(aor==SCB_ABORT) ? "ABORTING":"RESET",
- cmd->serial_number, scb->idx);
+ scb->idx);
return FALSE;
}
@@ -1996,9 +1996,9 @@
* list
*/
printk(KERN_WARNING
- "megaraid: %s-%lx[%x], driver owner.\n",
+ "megaraid: %s-[%x], driver owner.\n",
(aor==SCB_ABORT) ? "ABORTING":"RESET",
- cmd->serial_number, scb->idx);
+ scb->idx);
mega_free_scb(adapter, scb);
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 1dba328..2e6619e 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2315,8 +2315,8 @@
// Was an abort issued for this command earlier
if (scb->state & SCB_ABORT) {
con_log(CL_ANN, (KERN_NOTICE
- "megaraid: aborted cmd %lx[%x] completed\n",
- scp->serial_number, scb->sno));
+ "megaraid: aborted cmd [%x] completed\n",
+ scb->sno));
}
/*
@@ -2472,8 +2472,8 @@
raid_dev = ADAP2RAIDDEV(adapter);
con_log(CL_ANN, (KERN_WARNING
- "megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
- scp->serial_number, scp->cmnd[0], SCP2CHANNEL(scp),
+ "megaraid: aborting cmd=%x <c=%d t=%d l=%d>\n",
+ scp->cmnd[0], SCP2CHANNEL(scp),
SCP2TARGET(scp), SCP2LUN(scp)));
// If FW has stopped responding, simply return failure
@@ -2496,9 +2496,8 @@
list_del_init(&scb->list); // from completed list
con_log(CL_ANN, (KERN_WARNING
- "megaraid: %ld:%d[%d:%d], abort from completed list\n",
- scp->serial_number, scb->sno,
- scb->dev_channel, scb->dev_target));
+ "megaraid: %d[%d:%d], abort from completed list\n",
+ scb->sno, scb->dev_channel, scb->dev_target));
scp->result = (DID_ABORT << 16);
scp->scsi_done(scp);
@@ -2527,9 +2526,8 @@
ASSERT(!(scb->state & SCB_ISSUED));
con_log(CL_ANN, (KERN_WARNING
- "megaraid abort: %ld[%d:%d], driver owner\n",
- scp->serial_number, scb->dev_channel,
- scb->dev_target));
+ "megaraid abort: [%d:%d], driver owner\n",
+ scb->dev_channel, scb->dev_target));
scp->result = (DID_ABORT << 16);
scp->scsi_done(scp);
@@ -2560,25 +2558,21 @@
if (!(scb->state & SCB_ISSUED)) {
con_log(CL_ANN, (KERN_WARNING
- "megaraid abort: %ld%d[%d:%d], invalid state\n",
- scp->serial_number, scb->sno, scb->dev_channel,
- scb->dev_target));
+ "megaraid abort: %d[%d:%d], invalid state\n",
+ scb->sno, scb->dev_channel, scb->dev_target));
BUG();
}
else {
con_log(CL_ANN, (KERN_WARNING
- "megaraid abort: %ld:%d[%d:%d], fw owner\n",
- scp->serial_number, scb->sno, scb->dev_channel,
- scb->dev_target));
+ "megaraid abort: %d[%d:%d], fw owner\n",
+ scb->sno, scb->dev_channel, scb->dev_target));
}
}
}
spin_unlock_irq(&adapter->lock);
if (!found) {
- con_log(CL_ANN, (KERN_WARNING
- "megaraid abort: scsi cmd:%ld, do now own\n",
- scp->serial_number));
+ con_log(CL_ANN, (KERN_WARNING "megaraid abort: do now own\n"));
// FIXME: Should there be a callback for this command?
return SUCCESS;
@@ -2649,9 +2643,8 @@
} else {
if (scb->scp == scp) { // Found command
con_log(CL_ANN, (KERN_WARNING
- "megaraid: %ld:%d[%d:%d], reset from pending list\n",
- scp->serial_number, scb->sno,
- scb->dev_channel, scb->dev_target));
+ "megaraid: %d[%d:%d], reset from pending list\n",
+ scb->sno, scb->dev_channel, scb->dev_target));
} else {
con_log(CL_ANN, (KERN_WARNING
"megaraid: IO packet with %d[%d:%d] being reset\n",
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 66d4cea..89c623e 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1751,10 +1751,9 @@
list_del_init(&reset_cmd->list);
if (reset_cmd->scmd) {
reset_cmd->scmd->result = DID_RESET << 16;
- printk(KERN_NOTICE "%d:%p reset [%02x], %#lx\n",
+ printk(KERN_NOTICE "%d:%p reset [%02x]\n",
reset_index, reset_cmd,
- reset_cmd->scmd->cmnd[0],
- reset_cmd->scmd->serial_number);
+ reset_cmd->scmd->cmnd[0]);
reset_cmd->scmd->scsi_done(reset_cmd->scmd);
megasas_return_cmd(instance, reset_cmd);
@@ -1879,8 +1878,8 @@
instance = (struct megasas_instance *)scmd->device->host->hostdata;
- scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
- scmd->serial_number, scmd->cmnd[0], scmd->retries);
+ scmd_printk(KERN_NOTICE, scmd, "megasas: RESET cmd=%x retries=%x\n",
+ scmd->cmnd[0], scmd->retries);
if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
printk(KERN_ERR "megasas: cannot recover from previous reset "
@@ -2349,9 +2348,9 @@
cmd->frame_phys_addr ,
0, instance->reg_set);
} else if (cmd->scmd) {
- printk(KERN_NOTICE "megasas: %p scsi cmd [%02x],%#lx"
+ printk(KERN_NOTICE "megasas: %p scsi cmd [%02x]"
"detected on the internal queue, issue again.\n",
- cmd, cmd->scmd->cmnd[0], cmd->scmd->serial_number);
+ cmd, cmd->scmd->cmnd[0]);
atomic_inc(&instance->fw_outstanding);
instance->instancet->fire_cmd(instance,
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 197aa1b..4944747 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -415,8 +415,7 @@
#if 1
if (DEBUG_TARGET(cmd)) {
int i;
- printk(KERN_DEBUG "mesh_start: %p ser=%lu tgt=%d cmd=",
- cmd, cmd->serial_number, id);
+ printk(KERN_DEBUG "mesh_start: %p tgt=%d cmd=", cmd, id);
for (i = 0; i < cmd->cmd_len; ++i)
printk(" %x", cmd->cmnd[i]);
printk(" use_sg=%d buffer=%p bufflen=%u\n",
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 3346357..efa0255 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -522,7 +522,8 @@
desc = "Device Status Change";
break;
case MPI2_EVENT_IR_OPERATION_STATUS:
- desc = "IR Operation Status";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Operation Status";
break;
case MPI2_EVENT_SAS_DISCOVERY:
{
@@ -553,16 +554,20 @@
desc = "SAS Enclosure Device Status Change";
break;
case MPI2_EVENT_IR_VOLUME:
- desc = "IR Volume";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Volume";
break;
case MPI2_EVENT_IR_PHYSICAL_DISK:
- desc = "IR Physical Disk";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Physical Disk";
break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- desc = "IR Configuration Change List";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Configuration Change List";
break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
- desc = "Log Entry Added";
+ if (!ioc->hide_ir_msg)
+ desc = "Log Entry Added";
break;
}
@@ -616,7 +621,10 @@
originator_str = "PL";
break;
case 2:
- originator_str = "IR";
+ if (!ioc->hide_ir_msg)
+ originator_str = "IR";
+ else
+ originator_str = "WarpDrive";
break;
}
@@ -1508,6 +1516,7 @@
}
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].scmd = NULL;
+ ioc->scsi_lookup[i].direct_io = 0;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -1844,10 +1853,12 @@
printk("), ");
printk("Capabilities=(");
- if (ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
- printk("Raid");
- i++;
+ if (!ioc->hide_ir_msg) {
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
+ printk("Raid");
+ i++;
+ }
}
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
@@ -3680,6 +3691,7 @@
u32 reply_address;
u16 smid;
struct _tr_list *delayed_tr, *delayed_tr_next;
+ u8 hide_flag;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
@@ -3706,6 +3718,7 @@
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].smid = smid;
ioc->scsi_lookup[i].scmd = NULL;
+ ioc->scsi_lookup[i].direct_io = 0;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
}
@@ -3766,6 +3779,15 @@
if (sleep_flag == CAN_SLEEP)
_base_static_config_pages(ioc);
+ if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
+ if (ioc->manu_pg10.OEMIdentifier == 0x80) {
+ hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
+ MFG_PAGE10_HIDE_SSDS_MASK);
+ if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+ ioc->mfg_pg10_hide_flag = hide_flag;
+ }
+ }
+
if (ioc->wait_for_port_enable_to_complete) {
if (diag_buffer_enable != 0)
mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 5003282..2a3c05f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,11 +69,11 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "08.100.00.00"
+#define MPT2SAS_DRIVER_VERSION "08.100.00.01"
#define MPT2SAS_MAJOR_VERSION 08
#define MPT2SAS_MINOR_VERSION 100
#define MPT2SAS_BUILD_VERSION 00
-#define MPT2SAS_RELEASE_VERSION 00
+#define MPT2SAS_RELEASE_VERSION 01
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
@@ -189,6 +189,16 @@
#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046
/*
+ * WarpDrive Specific Log codes
+ */
+
+#define MPT2_WARPDRIVE_LOGENTRY (0x8002)
+#define MPT2_WARPDRIVE_LC_SSDT (0x41)
+#define MPT2_WARPDRIVE_LC_SSDLW (0x43)
+#define MPT2_WARPDRIVE_LC_SSDLF (0x44)
+#define MPT2_WARPDRIVE_LC_BRMF (0x4D)
+
+/*
* per target private data
*/
#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
@@ -199,6 +209,7 @@
* struct MPT2SAS_TARGET - starget private hostdata
* @starget: starget object
* @sas_address: target sas address
+ * @raid_device: raid_device pointer to access volume data
* @handle: device handle
* @num_luns: number luns
* @flags: MPT_TARGET_FLAGS_XXX flags
@@ -208,6 +219,7 @@
struct MPT2SAS_TARGET {
struct scsi_target *starget;
u64 sas_address;
+ struct _raid_device *raid_device;
u16 handle;
int num_luns;
u32 flags;
@@ -215,6 +227,7 @@
u8 tm_busy;
};
+
/*
* per device private data
*/
@@ -262,6 +275,12 @@
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
+#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
+#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
+#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
+#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
+
+
struct MPT2SAS_DEVICE {
struct MPT2SAS_TARGET *sas_target;
unsigned int lun;
@@ -341,6 +360,7 @@
* @sdev: scsi device struct (volumes are single lun)
* @wwid: unique identifier for the volume
* @handle: device handle
+ * @block_size: Block size of the volume
* @id: target id
* @channel: target channel
* @volume_type: the raid level
@@ -348,20 +368,33 @@
* @num_pds: number of hidden raid components
* @responding: used in _scsih_raid_device_mark_responding
* @percent_complete: resync percent complete
+ * @direct_io_enabled: Whether direct io to PDs are allowed or not
+ * @stripe_exponent: X where 2powX is the stripe sz in blocks
+ * @max_lba: Maximum number of LBA in the volume
+ * @stripe_sz: Stripe Size of the volume
+ * @device_info: Device info of the volume member disk
+ * @pd_handle: Array of handles of the physical drives for direct I/O in le16
*/
+#define MPT_MAX_WARPDRIVE_PDS 8
struct _raid_device {
struct list_head list;
struct scsi_target *starget;
struct scsi_device *sdev;
u64 wwid;
u16 handle;
+ u16 block_sz;
int id;
int channel;
u8 volume_type;
- u32 device_info;
u8 num_pds;
u8 responding;
u8 percent_complete;
+ u8 direct_io_enabled;
+ u8 stripe_exponent;
+ u64 max_lba;
+ u32 stripe_sz;
+ u32 device_info;
+ u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
};
/**
@@ -470,6 +503,7 @@
* @smid: system message id
* @scmd: scsi request pointer
* @cb_idx: callback index
+ * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
* @chain_list: list of chains associated to this IO
* @tracker_list: list of free request (ioc->free_list)
*/
@@ -477,14 +511,14 @@
u16 smid;
struct scsi_cmnd *scmd;
u8 cb_idx;
+ u8 direct_io;
struct list_head chain_list;
struct list_head tracker_list;
};
/**
- * struct request_tracker - misc mf request tracker
+ * struct request_tracker - firmware request tracker
* @smid: system message id
- * @scmd: scsi request pointer
* @cb_idx: callback index
* @tracker_list: list of free request (ioc->free_list)
*/
@@ -832,6 +866,11 @@
u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
u32 ring_buffer_offset;
u32 ring_buffer_sz;
+ u8 is_warpdrive;
+ u8 hide_ir_msg;
+ u8 mfg_pg10_hide_flag;
+ u8 hide_drives;
+
};
typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index d72f1f2..437c2d9 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -1041,7 +1041,10 @@
__func__));
memset(&karg, 0 , sizeof(karg));
- karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
+ if (ioc->is_warpdrive)
+ karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
+ else
+ karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
if (ioc->pfacts)
karg.port_number = ioc->pfacts[0].PortNumber;
pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 69916e46..11ff1d5 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -133,6 +133,7 @@
#define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
#define MPT2_IOCTL_INTERFACE_SAS (0x03)
#define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05)
#define MPT2_IOCTL_VERSION_LENGTH (32)
/**
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index d2064a0..f12e023 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -233,6 +233,9 @@
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
PCI_ANY_ID, PCI_ANY_ID },
+ /* SSS6200 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
+ PCI_ANY_ID, PCI_ANY_ID },
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, scsih_pci_table);
@@ -1256,6 +1259,7 @@
sas_target_priv_data->handle = raid_device->handle;
sas_target_priv_data->sas_address = raid_device->wwid;
sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
+ sas_target_priv_data->raid_device = raid_device;
raid_device->starget = starget;
}
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
@@ -1455,7 +1459,10 @@
_scsih_is_raid(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
+ if (ioc->is_warpdrive)
+ return 0;
return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
}
@@ -1480,7 +1487,7 @@
sdev->channel);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- if (!raid_device)
+ if (!raid_device || ioc->is_warpdrive)
goto out;
if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
@@ -1640,6 +1647,212 @@
kfree(vol_pg0);
}
+/**
+ * _scsih_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t vol_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ struct _raid_device *raid_device;
+ u16 handle;
+ u16 ioc_status;
+
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(vol_pg1.DevHandle);
+ raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ if (raid_device)
+ raid_device->direct_io_enabled = 0;
+ }
+ return;
+}
+
+
+/**
+ * _scsih_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+static u8
+_scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t vol_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 handle;
+ u8 vol_cnt = 0;
+ u16 ioc_status;
+
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ vol_cnt++;
+ handle = le16_to_cpu(vol_pg1.DevHandle);
+ }
+ return vol_cnt;
+}
+
+
+/**
+ * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+static void
+_scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device)
+{
+ Mpi2RaidVolPage0_t *vol_pg0;
+ Mpi2RaidPhysDiskPage0_t pd_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 sz;
+ u8 num_pds, count;
+ u64 mb = 1024 * 1024;
+ u64 tb_2 = 2 * mb * mb;
+ u64 capacity;
+ u32 stripe_sz;
+ u8 i, stripe_exp;
+
+ if (!ioc->is_warpdrive)
+ return;
+
+ if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "globally as drives are exposed\n", ioc->name);
+ return;
+ }
+ if (_scsih_get_num_volumes(ioc) > 1) {
+ _scsih_disable_ddio(ioc);
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "globally as number of drives > 1\n", ioc->name);
+ return;
+ }
+ if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
+ &num_pds)) || !num_pds) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "Failure in computing number of drives\n", ioc->name);
+ return;
+ }
+
+ sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+ sizeof(Mpi2RaidVol0PhysDisk_t));
+ vol_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!vol_pg0) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "Memory allocation failure for RVPG0\n", ioc->name);
+ return;
+ }
+
+ if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+ MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "Failure in retrieving RVPG0\n", ioc->name);
+ kfree(vol_pg0);
+ return;
+ }
+
+ /*
+ * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+ * assumed for WARPDRIVE, disable direct I/O
+ */
+ if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+ printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x): num_mem=%d, "
+ "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
+ num_pds, MPT_MAX_WARPDRIVE_PDS);
+ kfree(vol_pg0);
+ return;
+ }
+ for (count = 0; count < num_pds; count++) {
+ if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+ vol_pg0->PhysDisk[count].PhysDiskNum) ||
+ pd_pg0.DevHandle == MPT2SAS_INVALID_DEVICE_HANDLE) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
+ "disabled for the drive with handle(0x%04x) member"
+ "handle retrieval failed for member number=%d\n",
+ ioc->name, raid_device->handle,
+ vol_pg0->PhysDisk[count].PhysDiskNum);
+ goto out_error;
+ }
+ raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+ }
+
+ /*
+ * Assumption for WD: Direct I/O is not supported if the volume is
+ * not RAID0, if the stripe size is not 64KB, if the block size is
+ * not 512 and if the volume size is >2TB
+ */
+ if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0 ||
+ le16_to_cpu(vol_pg0->BlockSize) != 512) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x): type=%d, "
+ "s_sz=%uK, blk_size=%u\n", ioc->name,
+ raid_device->handle, raid_device->volume_type,
+ le32_to_cpu(vol_pg0->StripeSize)/2,
+ le16_to_cpu(vol_pg0->BlockSize));
+ goto out_error;
+ }
+
+ capacity = (u64) le16_to_cpu(vol_pg0->BlockSize) *
+ (le64_to_cpu(vol_pg0->MaxLBA) + 1);
+
+ if (capacity > tb_2) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x) since drive sz > 2TB\n",
+ ioc->name, raid_device->handle);
+ goto out_error;
+ }
+
+ stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+ stripe_exp = 0;
+ for (i = 0; i < 32; i++) {
+ if (stripe_sz & 1)
+ break;
+ stripe_exp++;
+ stripe_sz >>= 1;
+ }
+ if (i == 32) {
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+ ioc->name, raid_device->handle,
+ le32_to_cpu(vol_pg0->StripeSize)/2);
+ goto out_error;
+ }
+ raid_device->stripe_exponent = stripe_exp;
+ raid_device->direct_io_enabled = 1;
+
+ printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive"
+ " with handle(0x%04x)\n", ioc->name, raid_device->handle);
+ /*
+ * WARPDRIVE: Though the following fields are not used for direct IO,
+ * stored for future purpose:
+ */
+ raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+ raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+ raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+ kfree(vol_pg0);
+ return;
+
+out_error:
+ raid_device->direct_io_enabled = 0;
+ for (count = 0; count < num_pds; count++)
+ raid_device->pd_handle[count] = 0;
+ kfree(vol_pg0);
+ return;
+}
/**
* _scsih_enable_tlr - setting TLR flags
@@ -1710,6 +1923,11 @@
_scsih_get_volume_capabilities(ioc, raid_device);
+ /*
+ * WARPDRIVE: Initialize the required data for Direct IO
+ */
+ _scsih_init_warpdrive_properties(ioc, raid_device);
+
/* RAID Queue Depth Support
* IS volume = underlying qdepth of drive type, either
* MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
@@ -1757,14 +1975,16 @@
break;
}
- sdev_printk(KERN_INFO, sdev, "%s: "
- "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
- r_level, raid_device->handle,
- (unsigned long long)raid_device->wwid,
- raid_device->num_pds, ds);
+ if (!ioc->hide_ir_msg)
+ sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
+ "wwid(0x%016llx), pd_count(%d), type(%s)\n",
+ r_level, raid_device->handle,
+ (unsigned long long)raid_device->wwid,
+ raid_device->num_pds, ds);
_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
/* raid transport support */
- _scsih_set_level(sdev, raid_device);
+ if (!ioc->is_warpdrive)
+ _scsih_set_level(sdev, raid_device);
return 0;
}
@@ -2133,8 +2353,7 @@
switch (type) {
case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
scmd_lookup = _scsih_scsi_lookup_get(ioc, smid_task);
- if (scmd_lookup && (scmd_lookup->serial_number ==
- scmd->serial_number))
+ if (scmd_lookup)
rc = FAILED;
else
rc = SUCCESS;
@@ -2182,16 +2401,20 @@
struct MPT2SAS_TARGET *priv_target = starget->hostdata;
struct _sas_device *sas_device = NULL;
unsigned long flags;
+ char *device_str = NULL;
if (!priv_target)
return;
+ if (ioc->hide_ir_msg)
+ device_str = "WarpDrive";
+ else
+ device_str = "volume";
scsi_print_command(scmd);
if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
- starget_printk(KERN_INFO, starget, "volume handle(0x%04x), "
- "volume wwid(0x%016llx)\n",
- priv_target->handle,
- (unsigned long long)priv_target->sas_address);
+ starget_printk(KERN_INFO, starget, "%s handle(0x%04x), "
+ "%s wwid(0x%016llx)\n", device_str, priv_target->handle,
+ device_str, (unsigned long long)priv_target->sas_address);
} else {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
@@ -3130,6 +3353,9 @@
a = 0;
b = 0;
+ if (ioc->is_warpdrive)
+ return;
+
/* Volume Resets for Deleted or Removed */
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) {
@@ -3347,6 +3573,105 @@
}
/**
+ * _scsih_scsi_direct_io_get - returns direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+static inline u8
+_scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ return ioc->scsi_lookup[smid - 1].direct_io;
+}
+
+/**
+ * _scsih_scsi_direct_io_set - sets direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @direct_io: Zero or non-zero value to set in the direct_io flag
+ *
+ * Returns Nothing.
+ */
+static inline void
+_scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
+{
+ ioc->scsi_lookup[smid - 1].direct_io = direct_io;
+}
+
+
+/**
+ * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @smid: system request message index
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+ struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ u16 smid)
+{
+ u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
+ u32 stripe_sz, stripe_exp;
+ u8 num_pds, *cdb_ptr, *tmp_ptr, *lba_ptr1, *lba_ptr2;
+ u8 cdb0 = scmd->cmnd[0];
+
+ /*
+ * Try Direct I/O to RAID memeber disks
+ */
+ if (cdb0 == READ_16 || cdb0 == READ_10 ||
+ cdb0 == WRITE_16 || cdb0 == WRITE_10) {
+ cdb_ptr = mpi_request->CDB.CDB32;
+
+ if ((cdb0 < READ_16) || !(cdb_ptr[2] | cdb_ptr[3] | cdb_ptr[4]
+ | cdb_ptr[5])) {
+ io_size = scsi_bufflen(scmd) >> 9;
+ /* get virtual lba */
+ lba_ptr1 = lba_ptr2 = (cdb0 < READ_16) ? &cdb_ptr[2] :
+ &cdb_ptr[6];
+ tmp_ptr = (u8 *)&v_lba + 3;
+ *tmp_ptr-- = *lba_ptr1++;
+ *tmp_ptr-- = *lba_ptr1++;
+ *tmp_ptr-- = *lba_ptr1++;
+ *tmp_ptr = *lba_ptr1;
+
+ if (((u64)v_lba + (u64)io_size - 1) <=
+ (u32)raid_device->max_lba) {
+ stripe_sz = raid_device->stripe_sz;
+ stripe_exp = raid_device->stripe_exponent;
+ stripe_off = v_lba & (stripe_sz - 1);
+
+ /* Check whether IO falls within a stripe */
+ if ((stripe_off + io_size) <= stripe_sz) {
+ num_pds = raid_device->num_pds;
+ p_lba = v_lba >> stripe_exp;
+ stripe_unit = p_lba / num_pds;
+ column = p_lba % num_pds;
+ p_lba = (stripe_unit << stripe_exp) +
+ stripe_off;
+ mpi_request->DevHandle =
+ cpu_to_le16(raid_device->
+ pd_handle[column]);
+ tmp_ptr = (u8 *)&p_lba + 3;
+ *lba_ptr2++ = *tmp_ptr--;
+ *lba_ptr2++ = *tmp_ptr--;
+ *lba_ptr2++ = *tmp_ptr--;
+ *lba_ptr2 = *tmp_ptr;
+ /*
+ * WD: To indicate this I/O is directI/O
+ */
+ _scsih_scsi_direct_io_set(ioc, smid, 1);
+ }
+ }
+ }
+ }
+}
+
+/**
* _scsih_qcmd - main scsi request entry point
* @scmd: pointer to scsi command object
* @done: function pointer to be invoked on completion
@@ -3363,6 +3688,7 @@
struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT2SAS_DEVICE *sas_device_priv_data;
struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _raid_device *raid_device;
Mpi2SCSIIORequest_t *mpi_request;
u32 mpi_control;
u16 smid;
@@ -3424,8 +3750,10 @@
} else
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
- /* Make sure Device is not raid volume */
- if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+ /* Make sure Device is not raid volume.
+ * We do not expose raid functionality to upper layer for warpdrive.
+ */
+ if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
@@ -3473,9 +3801,14 @@
}
}
+ raid_device = sas_target_priv_data->raid_device;
+ if (raid_device && raid_device->direct_io_enabled)
+ _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
+ smid);
+
if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST))
mpt2sas_base_put_smid_scsi_io(ioc, smid,
- sas_device_priv_data->sas_target->handle);
+ le16_to_cpu(mpi_request->DevHandle));
else
mpt2sas_base_put_smid_default(ioc, smid);
return 0;
@@ -3540,10 +3873,16 @@
unsigned long flags;
struct scsi_target *starget = scmd->device->sdev_target;
struct MPT2SAS_TARGET *priv_target = starget->hostdata;
+ char *device_str = NULL;
if (!priv_target)
return;
+ if (ioc->hide_ir_msg)
+ device_str = "WarpDrive";
+ else
+ device_str = "volume";
+
if (log_info == 0x31170000)
return;
@@ -3660,8 +3999,8 @@
scsi_print_command(scmd);
if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
- printk(MPT2SAS_WARN_FMT "\tvolume wwid(0x%016llx)\n", ioc->name,
- (unsigned long long)priv_target->sas_address);
+ printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
+ device_str, (unsigned long long)priv_target->sas_address);
} else {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
@@ -3840,6 +4179,20 @@
scmd->result = DID_NO_CONNECT << 16;
goto out;
}
+ /*
+ * WARPDRIVE: If direct_io is set then it is directIO,
+ * the failed direct I/O should be redirected to volume
+ */
+ if (_scsih_scsi_direct_io_get(ioc, smid)) {
+ _scsih_scsi_direct_io_set(ioc, smid, 0);
+ memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+ mpi_request->DevHandle =
+ cpu_to_le16(sas_device_priv_data->sas_target->handle);
+ mpt2sas_base_put_smid_scsi_io(ioc, smid,
+ sas_device_priv_data->sas_target->handle);
+ return 0;
+ }
+
/* turning off TLR */
scsi_state = mpi_reply->SCSIState;
@@ -3848,7 +4201,10 @@
le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++;
- if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+ /* Make sure Device is not raid volume.
+ * We do not expose raid functionality to upper layer for warpdrive.
+ */
+ if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
sas_is_tlr_enabled(scmd->device) &&
response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
sas_disable_tlr(scmd->device);
@@ -4681,8 +5037,10 @@
_scsih_ublock_io_device(ioc, sas_device_backup.handle);
- mpt2sas_transport_port_remove(ioc, sas_device_backup.sas_address,
- sas_device_backup.sas_address_parent);
+ if (!ioc->hide_drives)
+ mpt2sas_transport_port_remove(ioc,
+ sas_device_backup.sas_address,
+ sas_device_backup.sas_address_parent);
printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
"(0x%016llx)\n", ioc->name, sas_device_backup.handle,
@@ -5413,6 +5771,7 @@
&sas_device->volume_wwid);
set_bit(handle, ioc->pd_handles);
_scsih_reprobe_target(sas_device->starget, 1);
+
}
/**
@@ -5591,7 +5950,8 @@
Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ && !ioc->hide_ir_msg)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
#endif
@@ -5614,16 +5974,20 @@
le16_to_cpu(element->VolDevHandle));
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
- _scsih_sas_pd_hide(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_hide(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
- _scsih_sas_pd_expose(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_expose(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_HIDE:
- _scsih_sas_pd_add(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_add(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
- _scsih_sas_pd_delete(ioc, element);
+ if (!ioc->is_warpdrive)
+ _scsih_sas_pd_delete(ioc, element);
break;
}
}
@@ -5654,9 +6018,10 @@
handle = le16_to_cpu(event_data->VolDevHandle);
state = le32_to_cpu(event_data->NewValue);
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
- "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
- le32_to_cpu(event_data->PreviousValue), state));
+ if (!ioc->hide_ir_msg)
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
+ "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
+ le32_to_cpu(event_data->PreviousValue), state));
switch (state) {
case MPI2_RAID_VOL_STATE_MISSING:
@@ -5736,9 +6101,10 @@
handle = le16_to_cpu(event_data->PhysDiskDevHandle);
state = le32_to_cpu(event_data->NewValue);
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
- "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
- le32_to_cpu(event_data->PreviousValue), state));
+ if (!ioc->hide_ir_msg)
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
+ "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
+ le32_to_cpu(event_data->PreviousValue), state));
switch (state) {
case MPI2_RAID_PD_STATE_ONLINE:
@@ -5747,7 +6113,8 @@
case MPI2_RAID_PD_STATE_OPTIMAL:
case MPI2_RAID_PD_STATE_HOT_SPARE:
- set_bit(handle, ioc->pd_handles);
+ if (!ioc->is_warpdrive)
+ set_bit(handle, ioc->pd_handles);
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -5851,7 +6218,8 @@
u16 handle;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
- if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ && !ioc->hide_ir_msg)
_scsih_sas_ir_operation_status_event_debug(ioc,
event_data);
#endif
@@ -5910,7 +6278,7 @@
_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
u16 slot, u16 handle)
{
- struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
struct scsi_target *starget;
struct _sas_device *sas_device;
unsigned long flags;
@@ -5918,7 +6286,7 @@
spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
if (sas_device->sas_address == sas_address &&
- sas_device->slot == slot && sas_device->starget) {
+ sas_device->slot == slot) {
sas_device->responding = 1;
starget = sas_device->starget;
if (starget && starget->hostdata) {
@@ -5927,13 +6295,15 @@
sas_target_priv_data->deleted = 0;
} else
sas_target_priv_data = NULL;
- starget_printk(KERN_INFO, sas_device->starget,
- "handle(0x%04x), sas_addr(0x%016llx), enclosure "
- "logical id(0x%016llx), slot(%d)\n", handle,
- (unsigned long long)sas_device->sas_address,
- (unsigned long long)
- sas_device->enclosure_logical_id,
- sas_device->slot);
+ if (starget)
+ starget_printk(KERN_INFO, starget,
+ "handle(0x%04x), sas_addr(0x%016llx), "
+ "enclosure logical id(0x%016llx), "
+ "slot(%d)\n", handle,
+ (unsigned long long)sas_device->sas_address,
+ (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot);
if (sas_device->handle == handle)
goto out;
printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
@@ -6025,6 +6395,12 @@
starget_printk(KERN_INFO, raid_device->starget,
"handle(0x%04x), wwid(0x%016llx)\n", handle,
(unsigned long long)raid_device->wwid);
+ /*
+ * WARPDRIVE: The handles of the PDs might have changed
+ * across the host reset so re-initialize the
+ * required data for Direct IO
+ */
+ _scsih_init_warpdrive_properties(ioc, raid_device);
if (raid_device->handle == handle)
goto out;
printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
@@ -6086,18 +6462,20 @@
}
/* refresh the pd_handles */
- phys_disk_num = 0xFF;
- memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
- while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
- &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
- phys_disk_num))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
- phys_disk_num = pd_pg0.PhysDiskNum;
- handle = le16_to_cpu(pd_pg0.DevHandle);
- set_bit(handle, ioc->pd_handles);
+ if (!ioc->is_warpdrive) {
+ phys_disk_num = 0xFF;
+ memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
+ while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+ phys_disk_num))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ phys_disk_num = pd_pg0.PhysDiskNum;
+ handle = le16_to_cpu(pd_pg0.DevHandle);
+ set_bit(handle, ioc->pd_handles);
+ }
}
}
@@ -6243,6 +6621,50 @@
}
/**
+ * _scsih_hide_unhide_sas_devices - add/remove device to/from OS
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct _sas_device *sas_device, *sas_device_next;
+
+ if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag !=
+ MFG_PAGE10_HIDE_IF_VOL_PRESENT)
+ return;
+
+ if (ioc->hide_drives) {
+ if (_scsih_get_num_volumes(ioc))
+ return;
+ ioc->hide_drives = 0;
+ list_for_each_entry_safe(sas_device, sas_device_next,
+ &ioc->sas_device_list, list) {
+ if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+ sas_device->sas_address_parent)) {
+ _scsih_sas_device_remove(ioc, sas_device);
+ } else if (!sas_device->starget) {
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
+ }
+ } else {
+ if (!_scsih_get_num_volumes(ioc))
+ return;
+ ioc->hide_drives = 1;
+ list_for_each_entry_safe(sas_device, sas_device_next,
+ &ioc->sas_device_list, list) {
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
+ }
+ }
+}
+
+/**
* mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
* @ioc: per adapter object
* @reset_phase: phase
@@ -6326,6 +6748,7 @@
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
flags);
_scsih_remove_unresponding_sas_devices(ioc);
+ _scsih_hide_unhide_sas_devices(ioc);
return;
}
@@ -6425,6 +6848,53 @@
(Mpi2EventDataIrVolume_t *)
mpi_reply->EventData);
break;
+ case MPI2_EVENT_LOG_ENTRY_ADDED:
+ {
+ Mpi2EventDataLogEntryAdded_t *log_entry;
+ u32 *log_code;
+
+ if (!ioc->is_warpdrive)
+ break;
+
+ log_entry = (Mpi2EventDataLogEntryAdded_t *)
+ mpi_reply->EventData;
+ log_code = (u32 *)log_entry->LogData;
+
+ if (le16_to_cpu(log_entry->LogEntryQualifier)
+ != MPT2_WARPDRIVE_LOGENTRY)
+ break;
+
+ switch (le32_to_cpu(*log_code)) {
+ case MPT2_WARPDRIVE_LC_SSDT:
+ printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
+ "IO Throttling has occurred in the WarpDrive "
+ "subsystem. Check WarpDrive documentation for "
+ "additional details.\n", ioc->name);
+ break;
+ case MPT2_WARPDRIVE_LC_SSDLW:
+ printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
+ "Program/Erase Cycles for the WarpDrive subsystem "
+ "in degraded range. Check WarpDrive documentation "
+ "for additional details.\n", ioc->name);
+ break;
+ case MPT2_WARPDRIVE_LC_SSDLF:
+ printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
+ "There are no Program/Erase Cycles for the "
+ "WarpDrive subsystem. The storage device will be "
+ "in read-only mode. Check WarpDrive documentation "
+ "for additional details.\n", ioc->name);
+ break;
+ case MPT2_WARPDRIVE_LC_BRMF:
+ printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
+ "The Backup Rail Monitor has failed on the "
+ "WarpDrive subsystem. Check WarpDrive "
+ "documentation for additional details.\n",
+ ioc->name);
+ break;
+ }
+
+ break;
+ }
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
case MPI2_EVENT_IR_OPERATION_STATUS:
case MPI2_EVENT_SAS_DISCOVERY:
@@ -6583,7 +7053,8 @@
mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
- printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
+ if (!ioc->hide_ir_msg)
+ printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
init_completion(&ioc->scsih_cmds.done);
mpt2sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
@@ -6597,10 +7068,11 @@
if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
mpi_reply = ioc->scsih_cmds.reply;
- printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
- "ioc_status(0x%04x), loginfo(0x%08x)\n",
- ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
- le32_to_cpu(mpi_reply->IOCLogInfo));
+ if (!ioc->hide_ir_msg)
+ printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo));
}
out:
@@ -6759,6 +7231,9 @@
spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (ioc->hide_drives)
+ return;
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
@@ -6812,6 +7287,9 @@
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (ioc->hide_drives)
+ continue;
+
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
@@ -6882,6 +7360,11 @@
ioc->id = mpt_ids++;
sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
ioc->pdev = pdev;
+ if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) {
+ ioc->is_warpdrive = 1;
+ ioc->hide_ir_msg = 1;
+ } else
+ ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
ioc->scsi_io_cb_idx = scsi_io_cb_idx;
ioc->tm_cb_idx = tm_cb_idx;
ioc->ctl_cb_idx = ctl_cb_idx;
@@ -6947,6 +7430,20 @@
}
ioc->wait_for_port_enable_to_complete = 0;
+ if (ioc->is_warpdrive) {
+ if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS)
+ ioc->hide_drives = 0;
+ else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS)
+ ioc->hide_drives = 1;
+ else {
+ if (_scsih_get_num_volumes(ioc))
+ ioc->hide_drives = 1;
+ else
+ ioc->hide_drives = 0;
+ }
+ } else
+ ioc->hide_drives = 0;
+
_scsih_probe_devices(ioc);
return 0;
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
index 6de7af2..c82b012 100644
--- a/drivers/scsi/mvsas/Kconfig
+++ b/drivers/scsi/mvsas/Kconfig
@@ -3,6 +3,7 @@
#
# Copyright 2007 Red Hat, Inc.
# Copyright 2008 Marvell. <kewei@marvell.com>
+# Copyright 2009-20011 Marvell. <yuxiangl@marvell.com>
#
# This file is licensed under GPLv2.
#
diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile
index ffbf759..87b231a 100644
--- a/drivers/scsi/mvsas/Makefile
+++ b/drivers/scsi/mvsas/Makefile
@@ -3,6 +3,7 @@
#
# Copyright 2007 Red Hat, Inc.
# Copyright 2008 Marvell. <kewei@marvell.com>
+# Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
#
# This file is licensed under GPLv2.
#
diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c
index afc7f6f..13c9604 100644
--- a/drivers/scsi/mvsas/mv_64xx.c
+++ b/drivers/scsi/mvsas/mv_64xx.c
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
index 42e947d..545889b 100644
--- a/drivers/scsi/mvsas/mv_64xx.h
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index eed4c5c..78162c3 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 23ed9b1..8835bef 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
diff --git a/drivers/scsi/mvsas/mv_chips.h b/drivers/scsi/mvsas/mv_chips.h
index a67e1c4..1753a6f 100644
--- a/drivers/scsi/mvsas/mv_chips.h
+++ b/drivers/scsi/mvsas/mv_chips.h
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
index 1849da1..bc00c94 100644
--- a/drivers/scsi/mvsas/mv_defs.h
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
@@ -34,6 +35,8 @@
chip_6485,
chip_9480,
chip_9180,
+ chip_9445,
+ chip_9485,
chip_1300,
chip_1320
};
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 938d045..90b6366 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
@@ -25,13 +26,24 @@
#include "mv_sas.h"
+static int lldd_max_execute_num = 1;
+module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
+MODULE_PARM_DESC(collector, "\n"
+ "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
+ "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
+ "\tThe mvsas SAS LLDD supports both modes.\n"
+ "\tDefault: 1 (Direct Mode).\n");
+
static struct scsi_transport_template *mvs_stt;
+struct kmem_cache *mvs_task_list_cache;
static const struct mvs_chip_info mvs_chips[] = {
[chip_6320] = { 1, 2, 0x400, 17, 16, 9, &mvs_64xx_dispatch, },
[chip_6440] = { 1, 4, 0x400, 17, 16, 9, &mvs_64xx_dispatch, },
[chip_6485] = { 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
[chip_9180] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
[chip_9480] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
+ [chip_9445] = { 1, 4, 0x800, 17, 64, 11, &mvs_94xx_dispatch, },
+ [chip_9485] = { 2, 4, 0x800, 17, 64, 11, &mvs_94xx_dispatch, },
[chip_1300] = { 1, 4, 0x400, 17, 16, 9, &mvs_64xx_dispatch, },
[chip_1320] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
};
@@ -107,7 +119,6 @@
static void mvs_free(struct mvs_info *mvi)
{
- int i;
struct mvs_wq *mwq;
int slot_nr;
@@ -119,12 +130,8 @@
else
slot_nr = MVS_SLOTS;
- for (i = 0; i < mvi->tags_num; i++) {
- struct mvs_slot_info *slot = &mvi->slot_info[i];
- if (slot->buf)
- dma_free_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
- slot->buf, slot->buf_dma);
- }
+ if (mvi->dma_pool)
+ pci_pool_destroy(mvi->dma_pool);
if (mvi->tx)
dma_free_coherent(mvi->dev,
@@ -213,6 +220,7 @@
static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
{
int i = 0, slot_nr;
+ char pool_name[32];
if (mvi->flags & MVF_FLAG_SOC)
slot_nr = MVS_SOC_SLOTS;
@@ -272,18 +280,14 @@
if (!mvi->bulk_buffer)
goto err_out;
#endif
- for (i = 0; i < slot_nr; i++) {
- struct mvs_slot_info *slot = &mvi->slot_info[i];
-
- slot->buf = dma_alloc_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
- &slot->buf_dma, GFP_KERNEL);
- if (!slot->buf) {
- printk(KERN_DEBUG"failed to allocate slot->buf.\n");
+ sprintf(pool_name, "%s%d", "mvs_dma_pool", mvi->id);
+ mvi->dma_pool = pci_pool_create(pool_name, mvi->pdev, MVS_SLOT_BUF_SZ, 16, 0);
+ if (!mvi->dma_pool) {
+ printk(KERN_DEBUG "failed to create dma pool %s.\n", pool_name);
goto err_out;
- }
- memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
- ++mvi->tags_num;
}
+ mvi->tags_num = slot_nr;
+
/* Initialize tags */
mvs_tag_init(mvi);
return 0;
@@ -484,7 +488,7 @@
sha->num_phys = nr_core * chip_info->n_phy;
- sha->lldd_max_execute_num = 1;
+ sha->lldd_max_execute_num = lldd_max_execute_num;
if (mvi->flags & MVF_FLAG_SOC)
can_queue = MVS_SOC_CAN_QUEUE;
@@ -670,6 +674,24 @@
{ PCI_VDEVICE(TTI, 0x2740), chip_9480 },
{ PCI_VDEVICE(TTI, 0x2744), chip_9480 },
{ PCI_VDEVICE(TTI, 0x2760), chip_9480 },
+ {
+ .vendor = 0x1b4b,
+ .device = 0x9445,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x9480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_9445,
+ },
+ {
+ .vendor = 0x1b4b,
+ .device = 0x9485,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x9480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_9485,
+ },
{ } /* terminate list */
};
@@ -690,6 +712,14 @@
if (!mvs_stt)
return -ENOMEM;
+ mvs_task_list_cache = kmem_cache_create("mvs_task_list", sizeof(struct mvs_task_list),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!mvs_task_list_cache) {
+ rc = -ENOMEM;
+ mv_printk("%s: mvs_task_list_cache alloc failed! \n", __func__);
+ goto err_out;
+ }
+
rc = pci_register_driver(&mvs_pci_driver);
if (rc)
@@ -706,6 +736,7 @@
{
pci_unregister_driver(&mvs_pci_driver);
sas_release_transport(mvs_stt);
+ kmem_cache_destroy(mvs_task_list_cache);
}
module_init(mvs_init);
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index adedaa9..0ef2742 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
@@ -862,178 +863,286 @@
}
#define DEV_IS_GONE(mvi_dev) ((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
- struct completion *completion,int is_tmf,
- struct mvs_tmf_task *tmf)
+static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf,
+ struct mvs_tmf_task *tmf, int *pass)
{
struct domain_device *dev = task->dev;
- struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
- struct mvs_info *mvi = mvi_dev->mvi_info;
+ struct mvs_device *mvi_dev = dev->lldd_dev;
struct mvs_task_exec_info tei;
- struct sas_task *t = task;
struct mvs_slot_info *slot;
- u32 tag = 0xdeadbeef, rc, n_elem = 0;
- u32 n = num, pass = 0;
- unsigned long flags = 0, flags_libsas = 0;
+ u32 tag = 0xdeadbeef, n_elem = 0;
+ int rc = 0;
if (!dev->port) {
- struct task_status_struct *tsm = &t->task_status;
+ struct task_status_struct *tsm = &task->task_status;
tsm->resp = SAS_TASK_UNDELIVERED;
tsm->stat = SAS_PHY_DOWN;
+ /*
+ * libsas will use dev->port, should
+ * not call task_done for sata
+ */
if (dev->dev_type != SATA_DEV)
- t->task_done(t);
- return 0;
+ task->task_done(task);
+ return rc;
}
- spin_lock_irqsave(&mvi->lock, flags);
- do {
- dev = t->dev;
- mvi_dev = dev->lldd_dev;
- if (DEV_IS_GONE(mvi_dev)) {
- if (mvi_dev)
- mv_dprintk("device %d not ready.\n",
- mvi_dev->device_id);
- else
- mv_dprintk("device %016llx not ready.\n",
- SAS_ADDR(dev->sas_addr));
+ if (DEV_IS_GONE(mvi_dev)) {
+ if (mvi_dev)
+ mv_dprintk("device %d not ready.\n",
+ mvi_dev->device_id);
+ else
+ mv_dprintk("device %016llx not ready.\n",
+ SAS_ADDR(dev->sas_addr));
rc = SAS_PHY_DOWN;
- goto out_done;
- }
+ return rc;
+ }
+ tei.port = dev->port->lldd_port;
+ if (tei.port && !tei.port->port_attached && !tmf) {
+ if (sas_protocol_ata(task->task_proto)) {
+ struct task_status_struct *ts = &task->task_status;
+ mv_dprintk("SATA/STP port %d does not attach"
+ "device.\n", dev->port->id);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
- if (dev->port->id >= mvi->chip->n_phy)
- tei.port = &mvi->port[dev->port->id - mvi->chip->n_phy];
- else
- tei.port = &mvi->port[dev->port->id];
+ task->task_done(task);
- if (tei.port && !tei.port->port_attached) {
- if (sas_protocol_ata(t->task_proto)) {
- struct task_status_struct *ts = &t->task_status;
-
- mv_dprintk("port %d does not"
- "attached device.\n", dev->port->id);
- ts->stat = SAS_PROTO_RESPONSE;
- ts->stat = SAS_PHY_DOWN;
- spin_unlock_irqrestore(dev->sata_dev.ap->lock,
- flags_libsas);
- spin_unlock_irqrestore(&mvi->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&mvi->lock, flags);
- spin_lock_irqsave(dev->sata_dev.ap->lock,
- flags_libsas);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
- continue;
- } else {
- struct task_status_struct *ts = &t->task_status;
- ts->resp = SAS_TASK_UNDELIVERED;
- ts->stat = SAS_PHY_DOWN;
- t->task_done(t);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
- continue;
- }
- }
-
- if (!sas_protocol_ata(t->task_proto)) {
- if (t->num_scatter) {
- n_elem = dma_map_sg(mvi->dev,
- t->scatter,
- t->num_scatter,
- t->data_dir);
- if (!n_elem) {
- rc = -ENOMEM;
- goto err_out;
- }
- }
} else {
- n_elem = t->num_scatter;
+ struct task_status_struct *ts = &task->task_status;
+ mv_dprintk("SAS port %d does not attach"
+ "device.\n", dev->port->id);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
}
+ return rc;
+ }
- rc = mvs_tag_alloc(mvi, &tag);
- if (rc)
- goto err_out;
-
- slot = &mvi->slot_info[tag];
-
-
- t->lldd_task = NULL;
- slot->n_elem = n_elem;
- slot->slot_tag = tag;
- memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-
- tei.task = t;
- tei.hdr = &mvi->slot[tag];
- tei.tag = tag;
- tei.n_elem = n_elem;
- switch (t->task_proto) {
- case SAS_PROTOCOL_SMP:
- rc = mvs_task_prep_smp(mvi, &tei);
- break;
- case SAS_PROTOCOL_SSP:
- rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
- break;
- case SAS_PROTOCOL_SATA:
- case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
- rc = mvs_task_prep_ata(mvi, &tei);
- break;
- default:
- dev_printk(KERN_ERR, mvi->dev,
- "unknown sas_task proto: 0x%x\n",
- t->task_proto);
- rc = -EINVAL;
- break;
+ if (!sas_protocol_ata(task->task_proto)) {
+ if (task->num_scatter) {
+ n_elem = dma_map_sg(mvi->dev,
+ task->scatter,
+ task->num_scatter,
+ task->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto prep_out;
+ }
}
+ } else {
+ n_elem = task->num_scatter;
+ }
- if (rc) {
- mv_dprintk("rc is %x\n", rc);
- goto err_out_tag;
- }
- slot->task = t;
- slot->port = tei.port;
- t->lldd_task = slot;
- list_add_tail(&slot->entry, &tei.port->list);
- /* TODO: select normal or high priority */
- spin_lock(&t->task_state_lock);
- t->task_state_flags |= SAS_TASK_AT_INITIATOR;
- spin_unlock(&t->task_state_lock);
+ rc = mvs_tag_alloc(mvi, &tag);
+ if (rc)
+ goto err_out;
- mvs_hba_memory_dump(mvi, tag, t->task_proto);
- mvi_dev->running_req++;
- ++pass;
- mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
- if (n > 1)
- t = list_entry(t->list.next, struct sas_task, list);
- if (likely(pass))
- MVS_CHIP_DISP->start_delivery(mvi, (mvi->tx_prod - 1) &
- (MVS_CHIP_SLOT_SZ - 1));
+ slot = &mvi->slot_info[tag];
- } while (--n);
- rc = 0;
- goto out_done;
+ task->lldd_task = NULL;
+ slot->n_elem = n_elem;
+ slot->slot_tag = tag;
+ slot->buf = pci_pool_alloc(mvi->dma_pool, GFP_ATOMIC, &slot->buf_dma);
+ if (!slot->buf)
+ goto err_out_tag;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+ tei.task = task;
+ tei.hdr = &mvi->slot[tag];
+ tei.tag = tag;
+ tei.n_elem = n_elem;
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = mvs_task_prep_smp(mvi, &tei);
+ break;
+ case SAS_PROTOCOL_SSP:
+ rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ rc = mvs_task_prep_ata(mvi, &tei);
+ break;
+ default:
+ dev_printk(KERN_ERR, mvi->dev,
+ "unknown sas_task proto: 0x%x\n",
+ task->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc) {
+ mv_dprintk("rc is %x\n", rc);
+ goto err_out_slot_buf;
+ }
+ slot->task = task;
+ slot->port = tei.port;
+ task->lldd_task = slot;
+ list_add_tail(&slot->entry, &tei.port->list);
+ spin_lock(&task->task_state_lock);
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&task->task_state_lock);
+
+ mvs_hba_memory_dump(mvi, tag, task->task_proto);
+ mvi_dev->running_req++;
+ ++(*pass);
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+
+ return rc;
+
+err_out_slot_buf:
+ pci_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
err_out_tag:
mvs_tag_free(mvi, tag);
err_out:
- dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
- if (!sas_protocol_ata(t->task_proto))
+ dev_printk(KERN_ERR, mvi->dev, "mvsas prep failed[%d]!\n", rc);
+ if (!sas_protocol_ata(task->task_proto))
if (n_elem)
- dma_unmap_sg(mvi->dev, t->scatter, n_elem,
- t->data_dir);
-out_done:
+ dma_unmap_sg(mvi->dev, task->scatter, n_elem,
+ task->data_dir);
+prep_out:
+ return rc;
+}
+
+static struct mvs_task_list *mvs_task_alloc_list(int *num, gfp_t gfp_flags)
+{
+ struct mvs_task_list *first = NULL;
+
+ for (; *num > 0; --*num) {
+ struct mvs_task_list *mvs_list = kmem_cache_zalloc(mvs_task_list_cache, gfp_flags);
+
+ if (!mvs_list)
+ break;
+
+ INIT_LIST_HEAD(&mvs_list->list);
+ if (!first)
+ first = mvs_list;
+ else
+ list_add_tail(&mvs_list->list, &first->list);
+
+ }
+
+ return first;
+}
+
+static inline void mvs_task_free_list(struct mvs_task_list *mvs_list)
+{
+ LIST_HEAD(list);
+ struct list_head *pos, *a;
+ struct mvs_task_list *mlist = NULL;
+
+ __list_add(&list, mvs_list->list.prev, &mvs_list->list);
+
+ list_for_each_safe(pos, a, &list) {
+ list_del_init(pos);
+ mlist = list_entry(pos, struct mvs_task_list, list);
+ kmem_cache_free(mvs_task_list_cache, mlist);
+ }
+}
+
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+ struct completion *completion, int is_tmf,
+ struct mvs_tmf_task *tmf)
+{
+ struct domain_device *dev = task->dev;
+ struct mvs_info *mvi = NULL;
+ u32 rc = 0;
+ u32 pass = 0;
+ unsigned long flags = 0;
+
+ mvi = ((struct mvs_device *)task->dev->lldd_dev)->mvi_info;
+
+ if ((dev->dev_type == SATA_DEV) && (dev->sata_dev.ap != NULL))
+ spin_unlock_irq(dev->sata_dev.ap->lock);
+
+ spin_lock_irqsave(&mvi->lock, flags);
+ rc = mvs_task_prep(task, mvi, is_tmf, tmf, &pass);
+ if (rc)
+ dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+
+ if (likely(pass))
+ MVS_CHIP_DISP->start_delivery(mvi, (mvi->tx_prod - 1) &
+ (MVS_CHIP_SLOT_SZ - 1));
spin_unlock_irqrestore(&mvi->lock, flags);
+
+ if ((dev->dev_type == SATA_DEV) && (dev->sata_dev.ap != NULL))
+ spin_lock_irq(dev->sata_dev.ap->lock);
+
+ return rc;
+}
+
+static int mvs_collector_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+ struct completion *completion, int is_tmf,
+ struct mvs_tmf_task *tmf)
+{
+ struct domain_device *dev = task->dev;
+ struct mvs_prv_info *mpi = dev->port->ha->lldd_ha;
+ struct mvs_info *mvi = NULL;
+ struct sas_task *t = task;
+ struct mvs_task_list *mvs_list = NULL, *a;
+ LIST_HEAD(q);
+ int pass[2] = {0};
+ u32 rc = 0;
+ u32 n = num;
+ unsigned long flags = 0;
+
+ mvs_list = mvs_task_alloc_list(&n, gfp_flags);
+ if (n) {
+ printk(KERN_ERR "%s: mvs alloc list failed.\n", __func__);
+ rc = -ENOMEM;
+ goto free_list;
+ }
+
+ __list_add(&q, mvs_list->list.prev, &mvs_list->list);
+
+ list_for_each_entry(a, &q, list) {
+ a->task = t;
+ t = list_entry(t->list.next, struct sas_task, list);
+ }
+
+ list_for_each_entry(a, &q , list) {
+
+ t = a->task;
+ mvi = ((struct mvs_device *)t->dev->lldd_dev)->mvi_info;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+ rc = mvs_task_prep(t, mvi, is_tmf, tmf, &pass[mvi->id]);
+ if (rc)
+ dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ }
+
+ if (likely(pass[0]))
+ MVS_CHIP_DISP->start_delivery(mpi->mvi[0],
+ (mpi->mvi[0]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+
+ if (likely(pass[1]))
+ MVS_CHIP_DISP->start_delivery(mpi->mvi[1],
+ (mpi->mvi[1]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+
+ list_del_init(&q);
+
+free_list:
+ if (mvs_list)
+ mvs_task_free_list(mvs_list);
+
return rc;
}
int mvs_queue_command(struct sas_task *task, const int num,
gfp_t gfp_flags)
{
- return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+ struct mvs_device *mvi_dev = task->dev->lldd_dev;
+ struct sas_ha_struct *sas = mvi_dev->mvi_info->sas;
+
+ if (sas->lldd_max_execute_num < 2)
+ return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+ else
+ return mvs_collector_task_exec(task, num, gfp_flags, NULL, 0, NULL);
}
static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
@@ -1067,6 +1176,11 @@
/* do nothing */
break;
}
+
+ if (slot->buf) {
+ pci_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
+ slot->buf = NULL;
+ }
list_del_init(&slot->entry);
task->lldd_task = NULL;
slot->task = NULL;
@@ -1255,6 +1369,7 @@
spin_lock_irqsave(&mvi->lock, flags);
port->port_attached = 1;
phy->port = port;
+ sas_port->lldd_port = port;
if (phy->phy_type & PORT_TYPE_SAS) {
port->wide_port_phymap = sas_port->phy_mask;
mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 77ddc7c..1367d8b 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -3,6 +3,7 @@
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*
* This file is licensed under GPLv2.
*
@@ -67,6 +68,7 @@
extern struct mvs_info *tgt_mvi;
extern const struct mvs_dispatch mvs_64xx_dispatch;
extern const struct mvs_dispatch mvs_94xx_dispatch;
+extern struct kmem_cache *mvs_task_list_cache;
#define DEV_IS_EXPANDER(type) \
((type == EDGE_DEV) || (type == FANOUT_DEV))
@@ -341,6 +343,7 @@
dma_addr_t bulk_buffer_dma;
#define TRASH_BUCKET_SIZE 0x20000
#endif
+ void *dma_pool;
struct mvs_slot_info slot_info[0];
};
@@ -367,6 +370,11 @@
int n_elem;
};
+struct mvs_task_list {
+ struct sas_task *task;
+ struct list_head list;
+};
+
/******************** function prototype *********************/
void mvs_get_sas_addr(void *buf, u32 buflen);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 835d8d6..4b3b475 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -8147,7 +8147,7 @@
unsigned long flags;
struct scsi_cmnd *done_list;
- printk("ncr53c8xx_abort: command pid %lu\n", cmd->serial_number);
+ printk("ncr53c8xx_abort\n");
NCR_LOCK_NCB(np, flags);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 8ba5744..d838205 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -4066,7 +4066,7 @@
} */
printk(" tag=%d, transfersize=0x%x \n",
cmd->tag, cmd->transfersize);
- printk(" Pid=%li, SP=0x%p\n", cmd->serial_number, CMD_SP(cmd));
+ printk(" SP=0x%p\n", CMD_SP(cmd));
printk(" underflow size = 0x%x, direction=0x%x\n",
cmd->underflow, cmd->sc_data_direction);
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index d3e58d7..532313e 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -496,8 +496,8 @@
offset = 0;
}
- rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, addr, offset,
- SFP_BLOCK_SIZE);
+ rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
+ addr, offset, SFP_BLOCK_SIZE, 0);
if (rval != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to read SFP data (%x/%x/%x).\n", rval,
@@ -628,12 +628,12 @@
memcpy(ha->edc_data, &buf[8], len);
- rval = qla2x00_write_edc(vha, dev, adr, ha->edc_data_dma,
- ha->edc_data, len, opt);
+ rval = qla2x00_write_sfp(vha, ha->edc_data_dma, ha->edc_data,
+ dev, adr, len, opt);
if (rval != QLA_SUCCESS) {
DEBUG2(qla_printk(KERN_INFO, ha,
"Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02x.\n",
- rval, dev, adr, opt, len, *buf));
+ rval, dev, adr, opt, len, buf[8]));
return 0;
}
@@ -685,8 +685,8 @@
return -EINVAL;
memset(ha->edc_data, 0, len);
- rval = qla2x00_read_edc(vha, dev, adr, ha->edc_data_dma,
- ha->edc_data, len, opt);
+ rval = qla2x00_read_sfp(vha, ha->edc_data_dma, ha->edc_data,
+ dev, adr, len, opt);
if (rval != QLA_SUCCESS) {
DEBUG2(qla_printk(KERN_INFO, ha,
"Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n",
@@ -1568,7 +1568,7 @@
/* Now that the rport has been deleted, set the fcport state to
FCS_DEVICE_DEAD */
- atomic_set(&fcport->state, FCS_DEVICE_DEAD);
+ qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
/*
* Transport has effectively 'deleted' the rport, clear
@@ -1877,14 +1877,15 @@
scsi_remove_host(vha->host);
+ /* Allow timer to run to drain queued items, when removing vp */
+ qla24xx_deallocate_vp_id(vha);
+
if (vha->timer_active) {
qla2x00_vp_stop_timer(vha);
DEBUG15(printk(KERN_INFO "scsi(%ld): timer for the vport[%d]"
" = %p has stopped\n", vha->host_no, vha->vp_idx, vha));
}
- qla24xx_deallocate_vp_id(vha);
-
/* No pending activities shall be there on the vha now */
DEBUG(msleep(random32()%10)); /* Just to see if something falls on
* the net we have placed below */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 903b058..8c10e2c 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 074a999..0f0f54e 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 0961411..c53719a 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index b74e6b5..9304145 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ee20353..cc5a792 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -1717,6 +1717,14 @@
#define FCS_DEVICE_LOST 3
#define FCS_ONLINE 4
+static const char * const port_state_str[] = {
+ "Unknown",
+ "UNCONFIGURED",
+ "DEAD",
+ "LOST",
+ "ONLINE"
+};
+
/*
* FC port flags.
*/
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 6271353..a5a4e12 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index f5ba09c..691783a 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -416,8 +416,7 @@
uint8_t vp_index;
uint32_t fcp_data_dseg_address[2]; /* Data segment address. */
- uint16_t fcp_data_dseg_len; /* Data segment length. */
- uint16_t reserved_1; /* MUST be set to 0. */
+ uint32_t fcp_data_dseg_len; /* Data segment length. */
};
#define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index d48326e..0b38122 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -39,6 +39,8 @@
extern int qla2x00_perform_loop_resync(scsi_qla_host_t *);
extern int qla2x00_loop_resync(scsi_qla_host_t *);
+extern int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
+
extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
@@ -100,6 +102,8 @@
extern int ql2xenabledif;
extern int ql2xenablehba_err_chk;
extern int ql2xtargetreset;
+extern int ql2xdontresethba;
+extern unsigned int ql2xmaxlun;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -319,15 +323,12 @@
qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
extern int
-qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
+qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+ uint16_t, uint16_t, uint16_t, uint16_t);
extern int
-qla2x00_read_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
- uint8_t *, uint16_t, uint16_t);
-
-extern int
-qla2x00_write_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
- uint8_t *, uint16_t, uint16_t);
+qla2x00_write_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+ uint16_t, uint16_t, uint16_t, uint16_t);
extern int
qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
@@ -549,7 +550,6 @@
extern int qla82xx_rd_32(struct qla_hw_data *, ulong);
extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int);
extern int qla82xx_wrmem(struct qla_hw_data *, u64, void *, int);
-extern void qla82xx_rom_unlock(struct qla_hw_data *);
/* ISP 8021 IDC */
extern void qla82xx_clear_drv_active(struct qla_hw_data *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 74a91b6..8cd9066 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8575808..920b76b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -35,8 +35,6 @@
static int qla2x00_restart_isp(scsi_qla_host_t *);
-static int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
-
static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
static int qla84xx_init_chip(scsi_qla_host_t *);
static int qla25xx_init_queues(struct qla_hw_data *);
@@ -385,8 +383,18 @@
switch (data[0]) {
case MBS_COMMAND_COMPLETE:
+ /*
+ * Driver must validate login state - If PRLI not complete,
+ * force a relogin attempt via implicit LOGO, PLOGI, and PRLI
+ * requests.
+ */
+ rval = qla2x00_get_port_database(vha, fcport, 0);
+ if (rval != QLA_SUCCESS) {
+ qla2x00_post_async_logout_work(vha, fcport, NULL);
+ qla2x00_post_async_login_work(vha, fcport, NULL);
+ break;
+ }
if (fcport->flags & FCF_FCP2_DEVICE) {
- fcport->flags |= FCF_ASYNC_SENT;
qla2x00_post_async_adisc_work(vha, fcport, data);
break;
}
@@ -397,7 +405,7 @@
if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
else
- qla2x00_mark_device_lost(vha, fcport, 1, 1);
+ qla2x00_mark_device_lost(vha, fcport, 1, 0);
break;
case MBS_PORT_ID_USED:
fcport->loop_id = data[1];
@@ -409,7 +417,7 @@
rval = qla2x00_find_new_loop_id(vha, fcport);
if (rval != QLA_SUCCESS) {
fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_mark_device_lost(vha, fcport, 1, 1);
+ qla2x00_mark_device_lost(vha, fcport, 1, 0);
break;
}
qla2x00_post_async_login_work(vha, fcport, NULL);
@@ -441,7 +449,7 @@
if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
else
- qla2x00_mark_device_lost(vha, fcport, 1, 1);
+ qla2x00_mark_device_lost(vha, fcport, 1, 0);
return;
}
@@ -2536,7 +2544,7 @@
fcport->vp_idx = vha->vp_idx;
fcport->port_type = FCT_UNKNOWN;
fcport->loop_id = FC_NO_LOOP_ID;
- atomic_set(&fcport->state, FCS_UNCONFIGURED);
+ qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
fcport->supported_classes = FC_COS_UNSPECIFIED;
return fcport;
@@ -2722,7 +2730,7 @@
"loop_id=0x%04x\n",
vha->host_no, fcport->loop_id));
- atomic_set(&fcport->state, FCS_DEVICE_LOST);
+ qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
}
}
@@ -2934,7 +2942,7 @@
qla2x00_iidma_fcport(vha, fcport);
qla24xx_update_fcport_fcp_prio(vha, fcport);
qla2x00_reg_remote_port(vha, fcport);
- atomic_set(&fcport->state, FCS_ONLINE);
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
}
/*
@@ -3391,7 +3399,7 @@
* Context:
* Kernel context.
*/
-static int
+int
qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
{
int rval;
@@ -5202,7 +5210,7 @@
}
/* Reset Initialization control block */
- memset(icb, 0, sizeof(struct init_cb_81xx));
+ memset(icb, 0, ha->init_cb_size);
/* Copy 1st segment. */
dptr1 = (uint8_t *)icb;
@@ -5427,6 +5435,13 @@
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+ /* Update the firmware version */
+ qla2x00_get_fw_version(vha, &ha->fw_major_version,
+ &ha->fw_minor_version, &ha->fw_subminor_version,
+ &ha->fw_attributes, &ha->fw_memory_size,
+ ha->mpi_version, &ha->mpi_capabilities,
+ ha->phy_version);
+
if (ha->fce) {
ha->flags.fce_enabled = 1;
memset(ha->fce, 0,
@@ -5508,26 +5523,26 @@
*
* Return:
* non-zero (if found)
- * 0 (if not found)
+ * -1 (if not found)
*
* Context:
* Kernel context
*/
-uint8_t
+static int
qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
{
int i, entries;
uint8_t pid_match, wwn_match;
- uint8_t priority;
+ int priority;
uint32_t pid1, pid2;
uint64_t wwn1, wwn2;
struct qla_fcp_prio_entry *pri_entry;
struct qla_hw_data *ha = vha->hw;
if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
- return 0;
+ return -1;
- priority = 0;
+ priority = -1;
entries = ha->fcp_prio_cfg->num_entries;
pri_entry = &ha->fcp_prio_cfg->entry[0];
@@ -5610,7 +5625,7 @@
qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
{
int ret;
- uint8_t priority;
+ int priority;
uint16_t mb[5];
if (fcport->port_type != FCT_TARGET ||
@@ -5618,6 +5633,9 @@
return QLA_FUNCTION_FAILED;
priority = qla24xx_get_fcp_prio(vha, fcport);
+ if (priority < 0)
+ return QLA_FUNCTION_FAILED;
+
ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb);
if (ret == QLA_SUCCESS)
fcport->fcp_prio = priority;
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 48f97a9..4c8167e 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -83,3 +83,22 @@
}
INIT_LIST_HEAD(&((struct crc_context *)sp->ctx)->dsd_list);
}
+
+static inline void
+qla2x00_set_fcport_state(fc_port_t *fcport, int state)
+{
+ int old_state;
+
+ old_state = atomic_read(&fcport->state);
+ atomic_set(&fcport->state, state);
+
+ /* Don't print state transitions during initial allocation of fcport */
+ if (old_state && old_state != state) {
+ DEBUG(qla_printk(KERN_WARNING, fcport->vha->hw,
+ "scsi(%ld): FCPort state transitioned from %s to %s - "
+ "portid=%02x%02x%02x.\n", fcport->vha->host_no,
+ port_state_str[old_state], port_state_str[state],
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa));
+ }
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index d78d589..7bac3cd 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 712518d..9c0f0e3 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -843,7 +843,10 @@
qla_printk(KERN_WARNING, ha,
"Invalid SCSI completion handle %d.\n", index);
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
return;
}
@@ -861,7 +864,10 @@
qla_printk(KERN_WARNING, ha,
"Invalid ISP SCSI completion handle\n");
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
}
@@ -878,7 +884,10 @@
if (index >= MAX_OUTSTANDING_COMMANDS) {
qla_printk(KERN_WARNING, ha,
"%s: Invalid completion handle (%x).\n", func, index);
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
goto done;
}
sp = req->outstanding_cmds[index];
@@ -1564,7 +1573,10 @@
"scsi(%ld): Invalid status handle (0x%x).\n", vha->host_no,
sts->handle);
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
return;
}
@@ -1794,12 +1806,13 @@
if (logit)
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) FCP command status: 0x%x-0x%x (0x%x) "
- "oxid=0x%x cdb=%02x%02x%02x len=0x%x "
+ "portid=%02x%02x%02x oxid=0x%x cdb=%02x%02x%02x len=0x%x "
"rsp_info=0x%x resid=0x%x fw_resid=0x%x\n", vha->host_no,
cp->device->id, cp->device->lun, comp_status, scsi_status,
- cp->result, ox_id, cp->cmnd[0],
- cp->cmnd[1], cp->cmnd[2], scsi_bufflen(cp), rsp_info_len,
- resid_len, fw_resid_len));
+ cp->result, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa, ox_id, cp->cmnd[0], cp->cmnd[1],
+ cp->cmnd[2], scsi_bufflen(cp), rsp_info_len, resid_len,
+ fw_resid_len));
if (rsp->status_srb == NULL)
qla2x00_sp_compl(ha, sp);
@@ -1908,13 +1921,17 @@
qla2x00_sp_compl(ha, sp);
} else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
- COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
+ COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7
+ || pkt->entry_type == COMMAND_TYPE_6) {
DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
- vha->host_no));
+ vha->host_no));
qla_printk(KERN_WARNING, ha,
- "Error entry - invalid handle\n");
+ "Error entry - invalid handle\n");
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 3489339..c26f0ac 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -1261,11 +1261,12 @@
/* Check for logged in state. */
if (pd24->current_login_state != PDS_PRLI_COMPLETE &&
pd24->last_login_state != PDS_PRLI_COMPLETE) {
- DEBUG2(printk("%s(%ld): Unable to verify "
- "login-state (%x/%x) for loop_id %x\n",
- __func__, vha->host_no,
- pd24->current_login_state,
- pd24->last_login_state, fcport->loop_id));
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "scsi(%ld): Unable to verify login-state (%x/%x) "
+ " - portid=%02x%02x%02x.\n", vha->host_no,
+ pd24->current_login_state, pd24->last_login_state,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa));
rval = QLA_FUNCTION_FAILED;
goto gpd_error_out;
}
@@ -1289,6 +1290,12 @@
/* Check for logged in state. */
if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
pd->slave_state != PD_STATE_PORT_LOGGED_IN) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "scsi(%ld): Unable to verify login-state (%x/%x) "
+ " - portid=%02x%02x%02x.\n", vha->host_no,
+ pd->master_state, pd->slave_state,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa));
rval = QLA_FUNCTION_FAILED;
goto gpd_error_out;
}
@@ -1883,7 +1890,8 @@
lg->handle = MAKE_HANDLE(req->id, lg->handle);
lg->nport_handle = cpu_to_le16(loop_id);
lg->control_flags =
- __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
+ __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO|
+ LCF_FREE_NPORT);
lg->port_id[0] = al_pa;
lg->port_id[1] = area;
lg->port_id[2] = domain;
@@ -2362,7 +2370,7 @@
abt->entry_count = 1;
abt->handle = MAKE_HANDLE(req->id, abt->handle);
abt->nport_handle = cpu_to_le16(fcport->loop_id);
- abt->handle_to_abort = handle;
+ abt->handle_to_abort = MAKE_HANDLE(req->id, handle);
abt->port_id[0] = fcport->d_id.b.al_pa;
abt->port_id[1] = fcport->d_id.b.area;
abt->port_id[2] = fcport->d_id.b.domain;
@@ -2779,44 +2787,6 @@
}
int
-qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint16_t addr,
- uint16_t off, uint16_t count)
-{
- int rval;
- mbx_cmd_t mc;
- mbx_cmd_t *mcp = &mc;
-
- if (!IS_FWI2_CAPABLE(vha->hw))
- return QLA_FUNCTION_FAILED;
-
- DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
-
- mcp->mb[0] = MBC_READ_SFP;
- mcp->mb[1] = addr;
- mcp->mb[2] = MSW(sfp_dma);
- mcp->mb[3] = LSW(sfp_dma);
- mcp->mb[6] = MSW(MSD(sfp_dma));
- mcp->mb[7] = LSW(MSD(sfp_dma));
- mcp->mb[8] = count;
- mcp->mb[9] = off;
- mcp->mb[10] = 0;
- mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_0;
- mcp->tov = MBX_TOV_SECONDS;
- mcp->flags = 0;
- rval = qla2x00_mailbox_command(vha, mcp);
-
- if (rval != QLA_SUCCESS) {
- DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
- vha->host_no, rval, mcp->mb[0]));
- } else {
- DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
- }
-
- return rval;
-}
-
-int
qla2x00_get_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id,
uint16_t *port_speed, uint16_t *mb)
{
@@ -3581,15 +3551,22 @@
}
int
-qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
- dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+ uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
{
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+ if (len == 1)
+ opt |= BIT_0;
+
mcp->mb[0] = MBC_READ_SFP;
mcp->mb[1] = dev;
mcp->mb[2] = MSW(sfp_dma);
@@ -3597,17 +3574,16 @@
mcp->mb[6] = MSW(MSD(sfp_dma));
mcp->mb[7] = LSW(MSD(sfp_dma));
mcp->mb[8] = len;
- mcp->mb[9] = adr;
+ mcp->mb[9] = off;
mcp->mb[10] = opt;
mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
if (opt & BIT_0)
- if (sfp)
- *sfp = mcp->mb[8];
+ *sfp = mcp->mb[1];
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
@@ -3620,18 +3596,24 @@
}
int
-qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
- dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_write_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+ uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
{
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+ if (len == 1)
+ opt |= BIT_0;
+
if (opt & BIT_0)
- if (sfp)
- len = *sfp;
+ len = *sfp;
mcp->mb[0] = MBC_WRITE_SFP;
mcp->mb[1] = dev;
@@ -3640,10 +3622,10 @@
mcp->mb[6] = MSW(MSD(sfp_dma));
mcp->mb[7] = LSW(MSD(sfp_dma));
mcp->mb[8] = len;
- mcp->mb[9] = adr;
+ mcp->mb[9] = off;
mcp->mb[10] = opt;
mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -4160,63 +4142,32 @@
qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
{
int rval;
- mbx_cmd_t mc;
- mbx_cmd_t *mcp = &mc;
+ uint8_t byte;
struct qla_hw_data *ha = vha->hw;
- DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, ha->host_no));
+ DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
- /* High bits. */
- mcp->mb[0] = MBC_READ_SFP;
- mcp->mb[1] = 0x98;
- mcp->mb[2] = 0;
- mcp->mb[3] = 0;
- mcp->mb[6] = 0;
- mcp->mb[7] = 0;
- mcp->mb[8] = 1;
- mcp->mb[9] = 0x01;
- mcp->mb[10] = BIT_13|BIT_0;
- mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_1|MBX_0;
- mcp->tov = MBX_TOV_SECONDS;
- mcp->flags = 0;
- rval = qla2x00_mailbox_command(vha, mcp);
+ /* Integer part */
+ rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1, BIT_13|BIT_0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk(KERN_WARNING
- "%s(%ld): failed=%x (%x).\n", __func__,
- vha->host_no, rval, mcp->mb[0]));
+ "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
ha->flags.thermal_supported = 0;
goto fail;
}
- *temp = mcp->mb[1] & 0xFF;
+ *temp = byte;
- /* Low bits. */
- mcp->mb[0] = MBC_READ_SFP;
- mcp->mb[1] = 0x98;
- mcp->mb[2] = 0;
- mcp->mb[3] = 0;
- mcp->mb[6] = 0;
- mcp->mb[7] = 0;
- mcp->mb[8] = 1;
- mcp->mb[9] = 0x10;
- mcp->mb[10] = BIT_13|BIT_0;
- mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_1|MBX_0;
- mcp->tov = MBX_TOV_SECONDS;
- mcp->flags = 0;
- rval = qla2x00_mailbox_command(vha, mcp);
+ /* Fraction part */
+ rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1, BIT_13|BIT_0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk(KERN_WARNING
- "%s(%ld): failed=%x (%x).\n", __func__,
- vha->host_no, rval, mcp->mb[0]));
+ "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
ha->flags.thermal_supported = 0;
goto fail;
}
- *frac = ((mcp->mb[1] & 0xFF) >> 6) * 25;
+ *frac = (byte >> 6) * 25;
- if (rval == QLA_SUCCESS)
- DEBUG11(printk(KERN_INFO
- "%s(%ld): done.\n", __func__, ha->host_no));
+ DEBUG11(printk(KERN_INFO "%s(%ld): done.\n", __func__, vha->host_no));
fail:
return rval;
}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2b69392..5e34391 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -136,7 +136,7 @@
vha->host_no, fcport->loop_id, fcport->vp_idx));
qla2x00_mark_device_lost(vha, fcport, 0, 0);
- atomic_set(&fcport->state, FCS_UNCONFIGURED);
+ qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
}
}
@@ -456,7 +456,7 @@
else
host->max_cmd_len = MAX_CMDSZ;
host->max_channel = MAX_BUSES - 1;
- host->max_lun = MAX_LUNS;
+ host->max_lun = ql2xmaxlun;
host->unique_id = host->host_no;
host->max_id = MAX_TARGETS_2200;
host->transportt = qla2xxx_transport_vport_template;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 455fe13..e1138bc 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -844,6 +844,12 @@
return 0;
}
+static void
+qla82xx_rom_unlock(struct qla_hw_data *ha)
+{
+ qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+}
+
static int
qla82xx_wait_rom_busy(struct qla_hw_data *ha)
{
@@ -924,7 +930,7 @@
return -1;
}
ret = qla82xx_do_rom_fast_read(ha, addr, valp);
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
return ret;
}
@@ -1056,7 +1062,7 @@
ret = qla82xx_flash_wait_write_finish(ha);
done_write:
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
return ret;
}
@@ -1081,12 +1087,26 @@
/* Halt all the indiviual PEGs and other blocks of the ISP */
qla82xx_rom_lock(ha);
- /* mask all niu interrupts */
+ /* disable all I2Q */
+ qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x10, 0x0);
+ qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x14, 0x0);
+ qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x18, 0x0);
+ qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x1c, 0x0);
+ qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x20, 0x0);
+ qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x24, 0x0);
+
+ /* disable all niu interrupts */
qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff);
/* disable xge rx/tx */
qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00);
/* disable xg1 rx/tx */
qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00);
+ /* disable sideband mac */
+ qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x90000, 0x00);
+ /* disable ap0 mac */
+ qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0xa0000, 0x00);
+ /* disable ap1 mac */
+ qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0xb0000, 0x00);
/* halt sre */
val = qla82xx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000);
@@ -1101,6 +1121,7 @@
qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0);
qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0);
qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0);
+ qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x200, 0x0);
/* halt pegs */
qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1);
@@ -1108,9 +1129,9 @@
qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1);
qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1);
qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1);
+ msleep(20);
/* big hammer */
- msleep(1000);
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
/* don't reset CAM block on reset */
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
@@ -1129,7 +1150,7 @@
qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
msleep(20);
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
/* Read the signature value from the flash.
* Offset 0: Contain signature (0xcafecafe)
@@ -2395,9 +2416,13 @@
if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
- "Firmware loaded successfully from flash\n");
+ "Firmware loaded successfully from flash\n");
return QLA_SUCCESS;
+ } else {
+ qla_printk(KERN_ERR, ha,
+ "Firmware load from flash failed\n");
}
+
try_blob_fw:
qla_printk(KERN_INFO, ha,
"Attempting to load firmware from blob\n");
@@ -2548,11 +2573,11 @@
dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
*dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
- cmd_pkt->fcp_data_dseg_len = dsd_list_len;
+ *dsd_seg++ = cpu_to_le32(dsd_list_len);
} else {
*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
- *cur_dsd++ = dsd_list_len;
+ *cur_dsd++ = cpu_to_le32(dsd_list_len);
}
cur_dsd = (uint32_t *)next_dsd;
while (avail_dsds) {
@@ -2991,7 +3016,7 @@
qla_printk(KERN_WARNING, ha, "Write disable failed\n");
done_unprotect:
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
return ret;
}
@@ -3020,7 +3045,7 @@
if (qla82xx_write_disable_flash(ha) != 0)
qla_printk(KERN_WARNING, ha, "Write disable failed\n");
done_protect:
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
return ret;
}
@@ -3048,7 +3073,7 @@
}
ret = qla82xx_flash_wait_write_finish(ha);
done:
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
return ret;
}
@@ -3228,7 +3253,7 @@
* else died while holding it.
* In either case, unlock.
*/
- qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+ qla82xx_rom_unlock(ha);
}
/*
@@ -3528,15 +3553,18 @@
qla82xx_device_state_handler(scsi_qla_host_t *vha)
{
uint32_t dev_state;
+ uint32_t old_dev_state;
int rval = QLA_SUCCESS;
unsigned long dev_init_timeout;
struct qla_hw_data *ha = vha->hw;
+ int loopcount = 0;
qla82xx_idc_lock(ha);
if (!vha->flags.init_done)
qla82xx_set_drv_active(vha);
dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ old_dev_state = dev_state;
qla_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state,
dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
@@ -3553,10 +3581,16 @@
break;
}
dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
- qla_printk(KERN_INFO, ha,
- "2:Device state is 0x%x = %s\n", dev_state,
- dev_state < MAX_STATES ?
- qdev_state[dev_state] : "Unknown");
+ if (old_dev_state != dev_state) {
+ loopcount = 0;
+ old_dev_state = dev_state;
+ }
+ if (loopcount < 5) {
+ qla_printk(KERN_INFO, ha,
+ "2:Device state is 0x%x = %s\n", dev_state,
+ dev_state < MAX_STATES ?
+ qdev_state[dev_state] : "Unknown");
+ }
switch (dev_state) {
case QLA82XX_DEV_READY:
@@ -3570,6 +3604,7 @@
qla82xx_idc_lock(ha);
break;
case QLA82XX_DEV_NEED_RESET:
+ if (!ql2xdontresethba)
qla82xx_need_reset_handler(vha);
dev_init_timeout = jiffies +
(ha->nx_dev_init_timeout * HZ);
@@ -3604,6 +3639,7 @@
msleep(1000);
qla82xx_idc_lock(ha);
}
+ loopcount++;
}
exit:
qla82xx_idc_unlock(ha);
@@ -3621,7 +3657,8 @@
if (dev_state == QLA82XX_DEV_NEED_RESET &&
!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) {
qla_printk(KERN_WARNING, ha,
- "%s(): Adapter reset needed!\n", __func__);
+ "scsi(%ld) %s: Adapter reset needed!\n",
+ vha->host_no, __func__);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
@@ -3632,10 +3669,27 @@
set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
} else {
- qla82xx_check_fw_alive(vha);
if (qla82xx_check_fw_alive(vha)) {
halt_status = qla82xx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS1);
+ qla_printk(KERN_INFO, ha,
+ "scsi(%ld): %s, Dumping hw/fw registers:\n "
+ " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n "
+ " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n "
+ " PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n "
+ " PEG_NET_4_PC: 0x%x\n",
+ vha->host_no, __func__, halt_status,
+ qla82xx_rd_32(ha, QLA82XX_PEG_HALT_STATUS2),
+ qla82xx_rd_32(ha,
+ QLA82XX_CRB_PEG_NET_0 + 0x3c),
+ qla82xx_rd_32(ha,
+ QLA82XX_CRB_PEG_NET_1 + 0x3c),
+ qla82xx_rd_32(ha,
+ QLA82XX_CRB_PEG_NET_2 + 0x3c),
+ qla82xx_rd_32(ha,
+ QLA82XX_CRB_PEG_NET_3 + 0x3c),
+ qla82xx_rd_32(ha,
+ QLA82XX_CRB_PEG_NET_4 + 0x3c));
if (halt_status & HALT_STATUS_UNRECOVERABLE) {
set_bit(ISP_UNRECOVERABLE,
&vha->dpc_flags);
@@ -3651,8 +3705,9 @@
if (ha->flags.mbox_busy) {
ha->flags.mbox_int = 1;
DEBUG2(qla_printk(KERN_ERR, ha,
- "Due to fw hung, doing premature "
- "completion of mbx command\n"));
+ "scsi(%ld) Due to fw hung, doing "
+ "premature completion of mbx "
+ "command\n", vha->host_no));
if (test_bit(MBX_INTR_WAIT,
&ha->mbx_cmd_flags))
complete(&ha->mbx_intr_comp);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index ed5883f..8a21832 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index aa77475..f461925 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -164,6 +164,20 @@
MODULE_PARM_DESC(ql2xasynctmfenable,
"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
+
+int ql2xdontresethba;
+module_param(ql2xdontresethba, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xdontresethba,
+ "Option to specify reset behaviour\n"
+ " 0 (Default) -- Reset on failure.\n"
+ " 1 -- Do not reset on failure.\n");
+
+uint ql2xmaxlun = MAX_LUNS;
+module_param(ql2xmaxlun, uint, S_IRUGO);
+MODULE_PARM_DESC(ql2xmaxlun,
+ "Defines the maximum LU number to register with the SCSI "
+ "midlayer. Default is 65535.");
+
/*
* SCSI host template entry points
*/
@@ -528,7 +542,7 @@
static int
qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
- scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+ scsi_qla_host_t *vha = shost_priv(host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
struct qla_hw_data *ha = vha->hw;
@@ -2128,7 +2142,7 @@
else
host->max_cmd_len = MAX_CMDSZ;
host->max_channel = MAX_BUSES - 1;
- host->max_lun = MAX_LUNS;
+ host->max_lun = ql2xmaxlun;
host->transportt = qla2xxx_transport_template;
sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
@@ -2360,21 +2374,26 @@
base_vha = pci_get_drvdata(pdev);
ha = base_vha->hw;
- spin_lock_irqsave(&ha->vport_slock, flags);
- list_for_each_entry(vha, &ha->vp_list, list) {
- atomic_inc(&vha->vref_count);
+ mutex_lock(&ha->vport_lock);
+ while (ha->cur_vport_count) {
+ struct Scsi_Host *scsi_host;
- if (vha->fc_vport) {
- spin_unlock_irqrestore(&ha->vport_slock, flags);
+ spin_lock_irqsave(&ha->vport_slock, flags);
- fc_vport_terminate(vha->fc_vport);
+ BUG_ON(base_vha->list.next == &ha->vp_list);
+ /* This assumes first entry in ha->vp_list is always base vha */
+ vha = list_first_entry(&base_vha->list, scsi_qla_host_t, list);
+ scsi_host = scsi_host_get(vha->host);
- spin_lock_irqsave(&ha->vport_slock, flags);
- }
+ spin_unlock_irqrestore(&ha->vport_slock, flags);
+ mutex_unlock(&ha->vport_lock);
- atomic_dec(&vha->vref_count);
+ fc_vport_terminate(vha->fc_vport);
+ scsi_host_put(vha->host);
+
+ mutex_lock(&ha->vport_lock);
}
- spin_unlock_irqrestore(&ha->vport_slock, flags);
+ mutex_unlock(&ha->vport_lock);
set_bit(UNLOADING, &base_vha->dpc_flags);
@@ -2544,7 +2563,7 @@
{
if (atomic_read(&fcport->state) == FCS_ONLINE &&
vha->vp_idx == fcport->vp_idx) {
- atomic_set(&fcport->state, FCS_DEVICE_LOST);
+ qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
qla2x00_schedule_rport_del(vha, fcport, defer);
}
/*
@@ -2552,7 +2571,7 @@
* port but do the retries.
*/
if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
- atomic_set(&fcport->state, FCS_DEVICE_LOST);
+ qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
if (!do_login)
return;
@@ -2607,7 +2626,7 @@
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
continue;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
- atomic_set(&fcport->state, FCS_DEVICE_LOST);
+ qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
if (defer)
qla2x00_schedule_rport_del(vha, fcport, defer);
else if (vha->vp_idx == fcport->vp_idx)
@@ -3214,6 +3233,17 @@
fcport->d_id.b.area,
fcport->d_id.b.al_pa);
+ if (fcport->loop_id == FC_NO_LOOP_ID) {
+ fcport->loop_id = next_loopid =
+ ha->min_external_loopid;
+ status = qla2x00_find_new_loop_id(
+ vha, fcport);
+ if (status != QLA_SUCCESS) {
+ /* Ran out of IDs to use */
+ break;
+ }
+ }
+
if (IS_ALOGIO_CAPABLE(ha)) {
fcport->flags |= FCF_ASYNC_SENT;
data[0] = 0;
@@ -3604,7 +3634,8 @@
if (!pci_channel_offline(ha->pdev))
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
- if (IS_QLA82XX(ha)) {
+ /* Make sure qla82xx_watchdog is run only for physical port */
+ if (!vha->vp_idx && IS_QLA82XX(ha)) {
if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags))
start_dpc++;
qla82xx_watchdog(vha);
@@ -3612,7 +3643,8 @@
/* Loop down handler. */
if (atomic_read(&vha->loop_down_timer) > 0 &&
- !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
+ !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) &&
+ !(test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags))
&& vha->flags.online) {
if (atomic_read(&vha->loop_down_timer) ==
@@ -3648,7 +3680,11 @@
if (!(sfcp->flags & FCF_FCP2_DEVICE))
continue;
- set_bit(ISP_ABORT_NEEDED,
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED,
+ &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED,
&vha->dpc_flags);
break;
}
@@ -3667,7 +3703,12 @@
qla_printk(KERN_WARNING, ha,
"Loop down - aborting ISP.\n");
- set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha))
+ set_bit(FCOE_CTX_RESET_NEEDED,
+ &vha->dpc_flags);
+ else
+ set_bit(ISP_ABORT_NEEDED,
+ &vha->dpc_flags);
}
}
DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
@@ -3675,8 +3716,8 @@
atomic_read(&vha->loop_down_timer)));
}
- /* Check if beacon LED needs to be blinked */
- if (ha->beacon_blink_led == 1) {
+ /* Check if beacon LED needs to be blinked for physical host only */
+ if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
start_dpc++;
}
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index f0b2b99..d70f030 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 2207062..6936476 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 3a260c3..062c97b 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -1,15 +1,15 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.00"
+#define QLA2XXX_VERSION "8.03.07.03-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
#define QLA_DRIVER_PATCH_VER 7
-#define QLA_DRIVER_BETA_VER 0
+#define QLA_DRIVER_BETA_VER 3
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 230ba09..c22f2a7 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -2068,15 +2068,14 @@
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
unsigned int id = cmd->device->id;
unsigned int lun = cmd->device->lun;
- unsigned long serial = cmd->serial_number;
unsigned long flags;
struct srb *srb = NULL;
int ret = SUCCESS;
int wait = 0;
ql4_printk(KERN_INFO, ha,
- "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n",
- ha->host_no, id, lun, cmd, serial);
+ "scsi%ld:%d:%d: Abort command issued cmd=%p\n",
+ ha->host_no, id, lun, cmd);
spin_lock_irqsave(&ha->hardware_lock, flags);
srb = (struct srb *) CMD_SP(cmd);
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index e2d45c9..9689d41c 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1292,8 +1292,10 @@
.use_clustering = ENABLE_CLUSTERING,
};
+static const struct of_device_id qpti_match[];
static int __devinit qpti_sbus_probe(struct platform_device *op)
{
+ const struct of_device_id *match;
struct scsi_host_template *tpnt;
struct device_node *dp = op->dev.of_node;
struct Scsi_Host *host;
@@ -1301,9 +1303,10 @@
static int nqptis;
const char *fcode;
- if (!op->dev.of_match)
+ match = of_match_device(qpti_match, &op->dev);
+ if (!match)
return -EINVAL;
- tpnt = op->dev.of_match->data;
+ tpnt = match->data;
/* Sometimes Antares cards come up not completely
* setup, and we get a report of a zero IRQ.
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 633c239..abea2cf 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -321,6 +321,12 @@
"changed. The Linux SCSI layer does not "
"automatically adjust these parameters.\n");
+ if (sshdr.asc == 0x38 && sshdr.ascq == 0x07)
+ scmd_printk(KERN_WARNING, scmd,
+ "Warning! Received an indication that the "
+ "LUN reached a thin provisioning soft "
+ "threshold.\n");
+
/*
* Pass the UA upwards for a determination in the completion
* functions.
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e9901b8..ec1803a 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -74,8 +74,6 @@
*/
#define SCSI_QUEUE_DELAY 3
-static void scsi_run_queue(struct request_queue *q);
-
/*
* Function: scsi_unprep_request()
*
@@ -161,7 +159,7 @@
blk_requeue_request(q, cmd->request);
spin_unlock_irqrestore(q->queue_lock, flags);
- scsi_run_queue(q);
+ kblockd_schedule_work(q, &device->requeue_work);
return 0;
}
@@ -400,10 +398,15 @@
static void scsi_run_queue(struct request_queue *q)
{
struct scsi_device *sdev = q->queuedata;
- struct Scsi_Host *shost = sdev->host;
+ struct Scsi_Host *shost;
LIST_HEAD(starved_list);
unsigned long flags;
+ /* if the device is dead, sdev will be NULL, so no queue to run */
+ if (!sdev)
+ return;
+
+ shost = sdev->host;
if (scsi_target(sdev)->single_lun)
scsi_single_lun_run(sdev);
@@ -433,7 +436,11 @@
continue;
}
- blk_run_queue_async(sdev->request_queue);
+ spin_unlock(shost->host_lock);
+ spin_lock(sdev->request_queue->queue_lock);
+ __blk_run_queue(sdev->request_queue);
+ spin_unlock(sdev->request_queue->queue_lock);
+ spin_lock(shost->host_lock);
}
/* put any unprocessed entries back */
list_splice(&starved_list, &shost->starved_list);
@@ -442,6 +449,16 @@
blk_run_queue(q);
}
+void scsi_requeue_run_queue(struct work_struct *work)
+{
+ struct scsi_device *sdev;
+ struct request_queue *q;
+
+ sdev = container_of(work, struct scsi_device, requeue_work);
+ q = sdev->request_queue;
+ scsi_run_queue(q);
+}
+
/*
* Function: scsi_requeue_command()
*
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index c99da92..f46855c 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -386,13 +386,59 @@
* @s: output goes here
* @p: not used
*/
-static int proc_scsi_show(struct seq_file *s, void *p)
+static int always_match(struct device *dev, void *data)
{
- seq_printf(s, "Attached devices:\n");
- bus_for_each_dev(&scsi_bus_type, NULL, s, proc_print_scsidevice);
- return 0;
+ return 1;
}
+static inline struct device *next_scsi_device(struct device *start)
+{
+ struct device *next = bus_find_device(&scsi_bus_type, start, NULL,
+ always_match);
+ put_device(start);
+ return next;
+}
+
+static void *scsi_seq_start(struct seq_file *sfile, loff_t *pos)
+{
+ struct device *dev = NULL;
+ loff_t n = *pos;
+
+ while ((dev = next_scsi_device(dev))) {
+ if (!n--)
+ break;
+ sfile->private++;
+ }
+ return dev;
+}
+
+static void *scsi_seq_next(struct seq_file *sfile, void *v, loff_t *pos)
+{
+ (*pos)++;
+ sfile->private++;
+ return next_scsi_device(v);
+}
+
+static void scsi_seq_stop(struct seq_file *sfile, void *v)
+{
+ put_device(v);
+}
+
+static int scsi_seq_show(struct seq_file *sfile, void *dev)
+{
+ if (!sfile->private)
+ seq_puts(sfile, "Attached devices:\n");
+
+ return proc_print_scsidevice(dev, sfile);
+}
+
+static const struct seq_operations scsi_seq_ops = {
+ .start = scsi_seq_start,
+ .next = scsi_seq_next,
+ .stop = scsi_seq_stop,
+ .show = scsi_seq_show
+};
+
/**
* proc_scsi_open - glue function
* @inode: not used
@@ -406,7 +452,7 @@
* We don't really need this for the write case but it doesn't
* harm either.
*/
- return single_open(file, proc_scsi_show, NULL);
+ return seq_open(file, &scsi_seq_ops);
}
static const struct file_operations proc_scsi_operations = {
@@ -415,7 +461,7 @@
.read = seq_read,
.write = proc_scsi_write,
.llseek = seq_lseek,
- .release = single_release,
+ .release = seq_release,
};
/**
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 087821f..58584dc 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -242,6 +242,7 @@
int display_failure_msg = 1, ret;
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
extern void scsi_evt_thread(struct work_struct *work);
+ extern void scsi_requeue_run_queue(struct work_struct *work);
sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
GFP_ATOMIC);
@@ -264,6 +265,7 @@
INIT_LIST_HEAD(&sdev->event_list);
spin_lock_init(&sdev->list_lock);
INIT_WORK(&sdev->event_work, scsi_evt_thread);
+ INIT_WORK(&sdev->requeue_work, scsi_requeue_run_queue);
sdev->sdev_gendev.parent = get_device(&starget->dev);
sdev->sdev_target = starget;
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 8bca8c2..84a1fdf 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -275,10 +275,8 @@
for (i = 0; i < ARRAY_SIZE(qdata->cmd_hash); i++) {
list_for_each_entry_safe(tcmd, n, &qdata->cmd_hash[i],
- hash_list) {
- list_del(&tcmd->hash_list);
- list_add(&tcmd->hash_list, &cmds);
- }
+ hash_list)
+ list_move(&tcmd->hash_list, &cmds);
}
spin_unlock_irqrestore(&qdata->cmd_hash_lock, flags);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 815069d..1b21491 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -422,8 +422,7 @@
snprintf(fc_host->work_q_name, sizeof(fc_host->work_q_name),
"fc_wq_%d", shost->host_no);
- fc_host->work_q = create_singlethread_workqueue(
- fc_host->work_q_name);
+ fc_host->work_q = alloc_workqueue(fc_host->work_q_name, 0, 0);
if (!fc_host->work_q)
return -ENOMEM;
@@ -431,8 +430,8 @@
snprintf(fc_host->devloss_work_q_name,
sizeof(fc_host->devloss_work_q_name),
"fc_dl_%d", shost->host_no);
- fc_host->devloss_work_q = create_singlethread_workqueue(
- fc_host->devloss_work_q_name);
+ fc_host->devloss_work_q =
+ alloc_workqueue(fc_host->devloss_work_q_name, 0, 0);
if (!fc_host->devloss_work_q) {
destroy_workqueue(fc_host->work_q);
fc_host->work_q = NULL;
@@ -2489,6 +2488,8 @@
unsigned long flags;
int do_callback = 0;
+ fc_terminate_rport_io(rport);
+
/*
* if a scan is pending, flush the SCSI Host work_q so that
* that we can reclaim the rport scan work element.
@@ -2496,8 +2497,6 @@
if (rport->flags & FC_RPORT_SCAN_PENDING)
scsi_flush_work(shost);
- fc_terminate_rport_io(rport);
-
/*
* Cancel any outstanding timers. These should really exist
* only when rmmod'ing the LLDD and we're asking for
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index a124a28f..a1baccc 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -565,12 +565,12 @@
pDCB->TagMask |= 1 << tag[1];
pSRB->TagNumber = tag[1];
DC390_write8(ScsiFifo, tag[1]);
- DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->serial_number, pSRB, tag[1]));
+ DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for SRB %p, block tag %02x\n", pSRB, tag[1]));
cmd = SEL_W_ATN3;
} else {
/* No TagQ */
//no_tag:
- DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->serial_number, pSRB));
+ DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for SRB %p, No TagQ\n", disc_allowed ? "" : "o", pSRB));
}
pSRB->SRBState = SRB_START_;
@@ -620,8 +620,8 @@
if (DC390_read8 (Scsi_Status) & INTERRUPT)
{
dc390_freetag (pDCB, pSRB);
- DEBUG0(printk ("DC390: Interrupt during Start SCSI (pid %li, target %02i-%02i)\n",
- scmd->serial_number, scmd->device->id, scmd->device->lun));
+ DEBUG0(printk ("DC390: Interrupt during Start SCSI (target %02i-%02i)\n",
+ scmd->device->id, scmd->device->lun));
pSRB->SRBState = SRB_READY;
//DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
pACB->SelLost++;
@@ -1705,8 +1705,7 @@
status = pSRB->TargetStatus;
- DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p, pid %li\n", status, pcmd->result,\
- pSRB, pcmd->serial_number));
+ DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p\n", status, pcmd->result, pSRB));
if(pSRB->SRBFlag & AUTO_REQSENSE)
{ /* Last command was a Request Sense */
pSRB->SRBFlag &= ~AUTO_REQSENSE;
@@ -1727,7 +1726,7 @@
} else {
SET_RES_DRV(pcmd->result, DRIVER_SENSE);
//pSRB->ScsiCmdLen = (u8) (pSRB->Segment1[0] >> 8);
- DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+ DEBUG0 (printk ("DC390: RETRY (%02x), target %02i-%02i\n", pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
pSRB->TotalXferredLen = 0;
SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
}
@@ -1747,7 +1746,7 @@
else if (status == SAM_STAT_TASK_SET_FULL)
{
scsi_track_queue_full(pcmd->device, pDCB->GoingSRBCnt - 1);
- DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+ DEBUG0 (printk ("DC390: RETRY (%02x), target %02i-%02i\n", pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
pSRB->TotalXferredLen = 0;
SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
}
@@ -1801,7 +1800,7 @@
/* Add to free list */
dc390_Free_insert (pACB, pSRB);
- DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->serial_number));
+ DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done\n"));
pcmd->scsi_done (pcmd);
return;
@@ -1997,8 +1996,7 @@
struct dc390_acb *pACB = (struct dc390_acb*) cmd->device->host->hostdata;
struct dc390_dcb *pDCB = (struct dc390_dcb*) cmd->device->hostdata;
- scmd_printk(KERN_WARNING, cmd,
- "DC390: Abort command (pid %li)\n", cmd->serial_number);
+ scmd_printk(KERN_WARNING, cmd, "DC390: Abort command\n");
/* abort() is too stupid for already sent commands at the moment.
* If it's called we are in trouble anyway, so let's dump some info
@@ -2006,7 +2004,7 @@
dc390_dumpinfo(pACB, pDCB, NULL);
pDCB->DCBFlag |= ABORT_DEV_;
- printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->serial_number);
+ printk(KERN_INFO "DC390: Aborted.\n");
return FAILED;
}
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index edfc5da..90e104d 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1256,8 +1256,8 @@
j = ((struct hostdata *) SCpnt->device->host->hostdata)->board_number;
if (SCpnt->host_scribble)
- panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
- BN(j), SCpnt->serial_number, SCpnt);
+ panic("%s: qcomm, SCpnt %p already active.\n",
+ BN(j), SCpnt);
/* i is the mailbox number, look for the first free mailbox
starting from last_cp_used */
@@ -1286,9 +1286,9 @@
cpp->cpp_index = i;
SCpnt->host_scribble = (unsigned char *) &cpp->cpp_index;
- if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d, pid %ld.\n",
+ if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d.\n",
BN(j), i, SCpnt->device->channel, SCpnt->device->id,
- SCpnt->device->lun, SCpnt->serial_number);
+ SCpnt->device->lun);
cpp->opcode = OP_SCSI;
cpp->channel = SCpnt->device->channel;
@@ -1315,7 +1315,7 @@
unmap_dma(i, j);
SCpnt->host_scribble = NULL;
scmd_printk(KERN_INFO, SCpnt,
- "qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
+ "qcomm, adapter busy.\n");
return 1;
}
@@ -1337,14 +1337,12 @@
j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
if (SCarg->host_scribble == NULL) {
- scmd_printk(KERN_INFO, SCarg, "abort, pid %ld inactive.\n",
- SCarg->serial_number);
+ scmd_printk(KERN_INFO, SCarg, "abort, command inactive.\n");
return SUCCESS;
}
i = *(unsigned int *)SCarg->host_scribble;
- scmd_printk(KERN_INFO, SCarg, "abort, mbox %d, pid %ld.\n",
- i, SCarg->serial_number);
+ scmd_printk(KERN_INFO, SCarg, "abort, mbox %d.\n", i);
if (i >= sh[j]->can_queue)
panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
@@ -1387,8 +1385,7 @@
SCarg->result = DID_ABORT << 16;
SCarg->host_scribble = NULL;
HD(j)->cp_stat[i] = FREE;
- printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
- BN(j), i, SCarg->serial_number);
+ printk("%s, abort, mbox %d ready, DID_ABORT, done.\n", BN(j), i);
SCarg->scsi_done(SCarg);
return SUCCESS;
}
@@ -1403,12 +1400,12 @@
struct scsi_cmnd *SCpnt;
j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
- scmd_printk(KERN_INFO, SCarg, "reset, enter, pid %ld.\n", SCarg->serial_number);
+ scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
spin_lock_irq(sh[j]->host_lock);
if (SCarg->host_scribble == NULL)
- printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->serial_number);
+ printk("%s: reset, inactive.\n", BN(j));
if (HD(j)->in_reset) {
printk("%s: reset, exit, already in reset.\n", BN(j));
@@ -1445,14 +1442,12 @@
if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
HD(j)->cp_stat[i] = ABORTING;
- printk("%s: reset, mbox %d aborting, pid %ld.\n",
- BN(j), i, SCpnt->serial_number);
+ printk("%s: reset, mbox %d aborting.\n", BN(j), i);
}
else {
HD(j)->cp_stat[i] = IN_RESET;
- printk("%s: reset, mbox %d in reset, pid %ld.\n",
- BN(j), i, SCpnt->serial_number);
+ printk("%s: reset, mbox %d in reset.\n", BN(j), i);
}
if (SCpnt->host_scribble == NULL)
@@ -1500,8 +1495,7 @@
/* This mailbox is still waiting for its interrupt */
HD(j)->cp_stat[i] = LOCKED;
- printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
- BN(j), i, SCpnt->serial_number);
+ printk("%s, reset, mbox %d locked, DID_RESET, done.\n", BN(j), i);
}
else if (HD(j)->cp_stat[i] == ABORTING) {
@@ -1513,8 +1507,7 @@
/* This mailbox was never queued to the adapter */
HD(j)->cp_stat[i] = FREE;
- printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
- BN(j), i, SCpnt->serial_number);
+ printk("%s, reset, mbox %d aborting, DID_RESET, done.\n", BN(j), i);
}
else
@@ -1528,7 +1521,7 @@
HD(j)->in_reset = FALSE;
do_trace = FALSE;
- if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->serial_number);
+ if (arg_done) printk("%s: reset, exit, done.\n", BN(j));
else printk("%s: reset, exit.\n", BN(j));
spin_unlock_irq(sh[j]->host_lock);
@@ -1671,10 +1664,10 @@
if (link_statistics && (overlap || !(flushcount % link_statistics)))
for (n = 0; n < n_ready; n++) {
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
- printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\
+ printk("%s %d.%d:%d mb %d fc %d nr %d sec %ld ns %u"\
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
- SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
+ SCpnt->lun, k, flushcount, n_ready,
blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request),
cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->xdir);
@@ -1709,9 +1702,9 @@
if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
scmd_printk(KERN_INFO, SCpnt,
- "%s, pid %ld, mbox %d, adapter"
+ "%s, mbox %d, adapter"
" busy, will abort.\n", (ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->serial_number, k);
+ k);
HD(j)->cp_stat[k] = ABORTING;
continue;
}
@@ -1793,12 +1786,12 @@
if (SCpnt == NULL) panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", BN(j), i);
if (SCpnt->host_scribble == NULL)
- panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", BN(j), i,
- SCpnt->serial_number, SCpnt);
+ panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", BN(j), i,
+ SCpnt);
if (*(unsigned int *)SCpnt->host_scribble != i)
- panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
- BN(j), i, SCpnt->serial_number, *(unsigned int *)SCpnt->host_scribble);
+ panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
+ BN(j), i, *(unsigned int *)SCpnt->host_scribble);
sync_dma(i, j);
@@ -1841,8 +1834,8 @@
(!(tstatus == CHECK_CONDITION && HD(j)->iocount <= 1000 &&
(SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
scmd_printk(KERN_INFO, SCpnt,
- "ihdlr, pid %ld, target_status 0x%x, sense key 0x%x.\n",
- SCpnt->serial_number, spp->target_status,
+ "ihdlr, target_status 0x%x, sense key 0x%x.\n",
+ spp->target_status,
SCpnt->sense_buffer[2]);
HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] = 0;
@@ -1913,8 +1906,8 @@
do_trace || msg_byte(spp->target_status))
#endif
scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"\
- " pid %ld, reg 0x%x, count %d.\n",
- i, spp->adapter_status, spp->target_status, SCpnt->serial_number,
+ " reg 0x%x, count %d.\n",
+ i, spp->adapter_status, spp->target_status,
reg, HD(j)->iocount);
unmap_dma(i, j);
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 4468ae3..97ae716 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -381,7 +381,7 @@
hostdata = (struct WD33C93_hostdata *) cmd->device->host->hostdata;
DB(DB_QUEUE_COMMAND,
- printk("Q-%d-%02x-%ld( ", cmd->device->id, cmd->cmnd[0], cmd->serial_number))
+ printk("Q-%d-%02x( ", cmd->device->id, cmd->cmnd[0]))
/* Set up a few fields in the scsi_cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
@@ -462,7 +462,7 @@
wd33c93_execute(cmd->device->host);
- DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+ DB(DB_QUEUE_COMMAND, printk(")Q "))
spin_unlock_irq(&hostdata->lock);
return 0;
@@ -687,7 +687,7 @@
*/
DB(DB_EXECUTE,
- printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+ printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
}
static void
@@ -963,7 +963,7 @@
case CSR_XFER_DONE | PHS_COMMAND:
case CSR_UNEXP | PHS_COMMAND:
case CSR_SRV_REQ | PHS_COMMAND:
- DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+ DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
transfer_pio(regs, cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR,
hostdata);
hostdata->state = S_CONNECTED;
@@ -1007,7 +1007,7 @@
switch (msg) {
case COMMAND_COMPLETE:
- DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("CCMP"))
write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
hostdata->state = S_PRE_CMP_DISC;
break;
@@ -1174,7 +1174,7 @@
write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
if (phs == 0x60) {
- DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("SX-DONE"))
cmd->SCp.Message = COMMAND_COMPLETE;
lun = read_wd33c93(regs, WD_TARGET_LUN);
DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1200,8 +1200,8 @@
wd33c93_execute(instance);
} else {
printk
- ("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---",
- asr, sr, phs, cmd->serial_number);
+ ("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---",
+ asr, sr, phs);
spin_unlock_irqrestore(&hostdata->lock, flags);
}
break;
@@ -1266,7 +1266,7 @@
spin_unlock_irqrestore(&hostdata->lock, flags);
return;
}
- DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("UNEXP_DISC"))
hostdata->connected = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
@@ -1292,7 +1292,7 @@
*/
write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
- DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("DISC"))
if (cmd == NULL) {
printk(" - Already disconnected! ");
hostdata->state = S_UNCONNECTED;
@@ -1491,7 +1491,6 @@
} else
hostdata->state = S_CONNECTED;
- DB(DB_INTR, printk("-%ld", cmd->serial_number))
spin_unlock_irqrestore(&hostdata->lock, flags);
break;
@@ -1637,8 +1636,8 @@
cmd->host_scribble = NULL;
cmd->result = DID_ABORT << 16;
printk
- ("scsi%d: Abort - removing command %ld from input_Q. ",
- instance->host_no, cmd->serial_number);
+ ("scsi%d: Abort - removing command from input_Q. ",
+ instance->host_no);
enable_irq(cmd->device->host->irq);
cmd->scsi_done(cmd);
return SUCCESS;
@@ -1662,8 +1661,8 @@
uchar sr, asr;
unsigned long timeout;
- printk("scsi%d: Aborting connected command %ld - ",
- instance->host_no, cmd->serial_number);
+ printk("scsi%d: Aborting connected command - ",
+ instance->host_no);
printk("stopping DMA - ");
if (hostdata->dma == D_DMA_RUNNING) {
@@ -1729,8 +1728,8 @@
while (tmp) {
if (tmp == cmd) {
printk
- ("scsi%d: Abort - command %ld found on disconnected_Q - ",
- instance->host_no, cmd->serial_number);
+ ("scsi%d: Abort - command found on disconnected_Q - ",
+ instance->host_no);
printk("Abort SNOOZE. ");
enable_irq(cmd->device->host->irq);
return FAILED;
@@ -2180,8 +2179,8 @@
strcat(bp, "\nconnected: ");
if (hd->connected) {
cmd = (struct scsi_cmnd *) hd->connected;
- sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)",
+ cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
@@ -2189,8 +2188,8 @@
strcat(bp, "\ninput_Q: ");
cmd = (struct scsi_cmnd *) hd->input_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)",
+ cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
@@ -2199,8 +2198,8 @@
strcat(bp, "\ndisconnected_Q:");
cmd = (struct scsi_cmnd *) hd->disconnected_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)",
+ cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 7c031fd..06d15b6 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -46,40 +46,66 @@
if (!ccdev)
return;
bus = ccdev->bus;
+
+ /* We support SLOW only on 6..9 */
+ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
+ mode = SSB_CLKMODE_DYNAMIC;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+ return; /* PMU controls clockmode, separated function needed */
+ SSB_WARN_ON(ccdev->id.revision >= 20);
+
/* chipcommon cores prior to rev6 don't support dynamic clock control */
if (ccdev->id.revision < 6)
return;
- /* chipcommon cores rev10 are a whole new ball game */
+
+ /* ChipCommon cores rev10+ need testing */
if (ccdev->id.revision >= 10)
return;
+
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
return;
switch (mode) {
- case SSB_CLKMODE_SLOW:
+ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
break;
case SSB_CLKMODE_FAST:
- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ if (ccdev->id.revision < 10) {
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
+ SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ /* udelay(150); TODO: not available in early init */
+ }
break;
case SSB_CLKMODE_DYNAMIC:
- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ if (ccdev->id.revision < 10) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
+ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
- /* for dynamic control, we have to release our xtal_pu "force on" */
- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ /* For dynamic control, we have to release our xtal_pu
+ * "force on" */
+ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ }
break;
default:
SSB_WARN_ON(1);
@@ -260,6 +286,12 @@
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
+ }
+
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index 5732bb2..305ade7 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -423,6 +423,8 @@
switch (bus->chip_id) {
case 0x4312:
+ min_msk = 0xCBB;
+ break;
case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 0e8d352..82feb34 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -15,6 +15,11 @@
#include "ssb_private.h"
+static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
+static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data);
static inline
u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
@@ -403,6 +408,107 @@
}
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static void ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
+{
+ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
+ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
+ tmp &= ~0xF000;
+ tmp |= (pc->dev->core_index << 12);
+ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
+ }
+}
+
+static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
+{
+ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
+{
+ const u8 serdes_pll_device = 0x1D;
+ const u8 serdes_rx_device = 0x1F;
+ u16 tmp;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+ ssb_pcicore_polarity_workaround(pc));
+ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+ if (tmp & 0x4000)
+ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
+{
+ struct ssb_device *pdev = pc->dev;
+ struct ssb_bus *bus = pdev->bus;
+ u32 tmp;
+
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_PREF;
+ tmp |= SSB_PCICORE_SBTOPCI_BURST;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+
+ if (pdev->id.revision < 5) {
+ tmp = ssb_read32(pdev, SSB_IMCFGLO);
+ tmp &= ~SSB_IMCFGLO_SERTO;
+ tmp |= 2;
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+ ssb_write32(pdev, SSB_IMCFGLO, tmp);
+ ssb_commit_settings(bus);
+ } else if (pdev->id.revision >= 11) {
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_MRM;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+ }
+}
+
+static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
+{
+ u32 tmp;
+ u8 rev = pc->dev->id.revision;
+
+ if (rev == 0 || rev == 1) {
+ /* TLP Workaround register. */
+ tmp = ssb_pcie_read(pc, 0x4);
+ tmp |= 0x8;
+ ssb_pcie_write(pc, 0x4, tmp);
+ }
+ if (rev == 1) {
+ /* DLLP Link Control register. */
+ tmp = ssb_pcie_read(pc, 0x100);
+ tmp |= 0x40;
+ ssb_pcie_write(pc, 0x100, tmp);
+ }
+
+ if (rev == 0) {
+ const u8 serdes_rx_device = 0x1F;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 2 /* Timer */, 0x8128);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 6 /* CDR */, 0x0100);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 7 /* CDR BW */, 0x1466);
+ } else if (rev == 3 || rev == 4 || rev == 5) {
+ /* TODO: DLLP Power Management Threshold */
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ } else if (rev == 7) {
+ /* TODO: No PLL down */
+ }
+
+ if (rev >= 6) {
+ /* Miscellaneous Configuration Fixup */
+ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
+ if (!(tmp & 0x8000))
+ pcicore_write16(pc, SSB_PCICORE_SPROM(5),
+ tmp | 0x8000);
+ }
+}
/**************************************************
* Generic and Clientmode operation code.
@@ -417,14 +523,14 @@
void ssb_pcicore_init(struct ssb_pcicore *pc)
{
struct ssb_device *dev = pc->dev;
- struct ssb_bus *bus;
if (!dev)
return;
- bus = dev->bus;
if (!ssb_device_is_enabled(dev))
ssb_device_enable(dev, 0);
+ ssb_pcicore_fix_sprom_core_index(pc);
+
#ifdef CONFIG_SSB_PCICORE_HOSTMODE
pc->hostmode = pcicore_is_in_hostmode(pc);
if (pc->hostmode)
@@ -432,6 +538,11 @@
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
+
+ /* Additional always once-executed workarounds */
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
@@ -446,28 +557,98 @@
pcicore_write32(pc, 0x134, data);
}
-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
- u8 address, u16 data)
+static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
{
const u16 mdio_control = 0x128;
const u16 mdio_data = 0x12C;
u32 v;
int i;
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ v |= (0x1F << 18);
+ v |= (phy << 4);
+ pcicore_write32(pc, mdio_data, v);
+
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+}
+
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u16 ret = 0;
+ u32 v;
+ int i;
+
v = 0x80; /* Enable Preamble Sequence */
v |= 0x2; /* MDIO Clock Divisor */
pcicore_write32(pc, mdio_control, v);
+ if (pc->dev->id.revision >= 10) {
+ max_retries = 200;
+ ssb_pcie_mdio_set_phy(pc, device);
+ }
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 29); /* Read Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->dev->id.revision < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */) {
+ udelay(10);
+ ret = pcicore_read32(pc, mdio_data);
+ break;
+ }
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
+ return ret;
+}
+
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u32 v;
+ int i;
+
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
+ if (pc->dev->id.revision >= 10) {
+ max_retries = 200;
+ ssb_pcie_mdio_set_phy(pc, device);
+ }
+
v = (1 << 30); /* Start of Transaction */
v |= (1 << 28); /* Write Transaction */
v |= (1 << 17); /* Turnaround */
- v |= (u32)device << 22;
+ if (pc->dev->id.revision < 10)
+ v |= (u32)device << 22;
v |= (u32)address << 18;
v |= data;
pcicore_write32(pc, mdio_data, v);
/* Wait for the device to complete the transaction */
udelay(10);
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < max_retries; i++) {
v = pcicore_read32(pc, mdio_control);
if (v & 0x100 /* Trans complete */)
break;
@@ -476,30 +657,6 @@
pcicore_write32(pc, mdio_control, 0);
}
-static void ssb_broadcast_value(struct ssb_device *dev,
- u32 address, u32 data)
-{
- /* This is used for both, PCI and ChipCommon core, so be careful. */
- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
-
- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-}
-
-static void ssb_commit_settings(struct ssb_bus *bus)
-{
- struct ssb_device *dev;
-
- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
- if (WARN_ON(!dev))
- return;
- /* This forces an update of the cached registers. */
- ssb_broadcast_value(dev, 0xFD8, 0);
-}
-
int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev)
{
@@ -550,48 +707,10 @@
if (pc->setup_done)
goto out;
if (pdev->id.coreid == SSB_DEV_PCI) {
- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
- tmp |= SSB_PCICORE_SBTOPCI_PREF;
- tmp |= SSB_PCICORE_SBTOPCI_BURST;
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
-
- if (pdev->id.revision < 5) {
- tmp = ssb_read32(pdev, SSB_IMCFGLO);
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 2;
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
- ssb_write32(pdev, SSB_IMCFGLO, tmp);
- ssb_commit_settings(bus);
- } else if (pdev->id.revision >= 11) {
- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
- tmp |= SSB_PCICORE_SBTOPCI_MRM;
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
- }
+ ssb_pcicore_pci_setup_workarounds(pc);
} else {
WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
- //TODO: Better make defines for all these magic PCIE values.
- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
- /* TLP Workaround register. */
- tmp = ssb_pcie_read(pc, 0x4);
- tmp |= 0x8;
- ssb_pcie_write(pc, 0x4, tmp);
- }
- if (pdev->id.revision == 0) {
- const u8 serdes_rx_device = 0x1F;
-
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 2 /* Timer */, 0x8128);
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 6 /* CDR */, 0x0100);
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 7 /* CDR BW */, 0x1466);
- } else if (pdev->id.revision == 1) {
- /* DLLP Link Control register. */
- tmp = ssb_pcie_read(pc, 0x100);
- tmp |= 0x40;
- ssb_pcie_write(pc, 0x100, tmp);
- }
+ ssb_pcicore_pcie_setup_workarounds(pc);
}
pc->setup_done = 1;
out:
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index e05ba6e..f8a13f8 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1117,23 +1117,22 @@
{
u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
- /* The REJECT bit changed position in TMSLOW between
- * Backplane revisions. */
+ /* The REJECT bit seems to be different for Backplane rev 2.3 */
switch (rev) {
case SSB_IDLOW_SSBREV_22:
- return SSB_TMSLOW_REJECT_22;
+ case SSB_IDLOW_SSBREV_24:
+ case SSB_IDLOW_SSBREV_26:
+ return SSB_TMSLOW_REJECT;
case SSB_IDLOW_SSBREV_23:
return SSB_TMSLOW_REJECT_23;
- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
- case SSB_IDLOW_SSBREV_25: /* same here */
- case SSB_IDLOW_SSBREV_26: /* same here */
+ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
case SSB_IDLOW_SSBREV_27: /* same here */
- return SSB_TMSLOW_REJECT_23; /* this is a guess */
+ return SSB_TMSLOW_REJECT; /* this is a guess */
default:
printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
WARN_ON(1);
}
- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
+ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
int ssb_device_is_enabled(struct ssb_device *dev)
@@ -1309,20 +1308,20 @@
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
{
- struct ssb_chipcommon *cc;
int err;
enum ssb_clkmode mode;
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
if (err)
goto error;
- cc = &bus->chipco;
- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
- ssb_chipco_set_clockmode(cc, mode);
#ifdef CONFIG_SSB_DEBUG
bus->powered_up = 1;
#endif
+
+ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+ ssb_chipco_set_clockmode(&bus->chipco, mode);
+
return 0;
error:
ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
@@ -1330,6 +1329,37 @@
}
EXPORT_SYMBOL(ssb_bus_powerup);
+static void ssb_broadcast_value(struct ssb_device *dev,
+ u32 address, u32 data)
+{
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ /* This is used for both, PCI and ChipCommon core, so be careful. */
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+#endif
+
+ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
+ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+ struct ssb_device *dev;
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+#else
+ dev = bus->chipco.dev;
+#endif
+ if (WARN_ON(!dev))
+ return;
+ /* This forces an update of the cached registers. */
+ ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
u32 ssb_admatch_base(u32 adm)
{
u32 base = 0;
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 6f34963..7ad4858 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -662,7 +662,6 @@
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
- const struct ssb_sprom *fallback;
int err;
u16 *buf;
@@ -707,10 +706,17 @@
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
- * If we have a fallback, use that. */
- fallback = ssb_get_fallback_sprom();
- if (fallback) {
- memcpy(sprom, fallback, sizeof(*sprom));
+ * Now we ask the arch code if there is some sprom
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+ ssb_printk(KERN_WARNING PFX "WARNING: Using"
+ " fallback SPROM failed (err %d)\n",
+ err);
+ } else {
+ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+ " revision %d provided by"
+ " platform.\n", sprom->revision);
err = 0;
goto out_free;
}
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 29884c0..45e5bab 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -258,7 +258,10 @@
#ifdef CONFIG_SSB_PCIHOST
if (bus->bustype == SSB_BUSTYPE_PCI) {
if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
- bus->host_pci->device == 0x4324)
+ ((bus->host_pci->device == 0x4313) ||
+ (bus->host_pci->device == 0x431A) ||
+ (bus->host_pci->device == 0x4321) ||
+ (bus->host_pci->device == 0x4324)))
return 1;
}
#endif /* CONFIG_SSB_PCIHOST */
@@ -307,7 +310,7 @@
} else {
if (bus->bustype == SSB_BUSTYPE_PCI) {
bus->chip_id = pcidev_to_chipid(bus->host_pci);
- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+ pci_read_config_byte(bus->host_pci, PCI_REVISION_ID,
&bus->chip_rev);
bus->chip_package = 0;
} else {
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 5f34d7a..45ff0e3 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -17,7 +17,7 @@
#include <linux/slab.h>
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@
}
/**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
*
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
*
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
*
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
*
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
*
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
*/
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out))
{
- if (fallback_sprom)
+ if (get_fallback_sprom)
return -EEXIST;
- fallback_sprom = sprom;
+ get_fallback_sprom = sprom_callback;
return 0;
}
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
{
- return fallback_sprom;
+ if (!get_fallback_sprom)
+ return -ENOENT;
+
+ return get_fallback_sprom(bus, out);
}
/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 0331139..7765301 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@
const char *buf, size_t count,
int (*sprom_check_crc)(const u16 *sprom, size_t size),
int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+ struct ssb_sprom *out);
/* core.c */
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index eeb7dd4..830822f 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -2288,7 +2288,3 @@
free_netdev(dev);
return NULL;
}
-
-EXPORT_SYMBOL(init_ft1000_card);
-EXPORT_SYMBOL(stop_ft1000_card);
-EXPORT_SYMBOL(flarion_ft1000_cnt);
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
index 935608e..bdfb1ae 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
@@ -214,6 +214,3 @@
remove_proc_entry(FT1000_PROC, init_net.proc_net);
unregister_netdevice_notifier(&ft1000_netdev_notifier);
}
-
-EXPORT_SYMBOL(ft1000InitProc);
-EXPORT_SYMBOL(ft1000CleanupProc);
diff --git a/drivers/staging/gma500/Kconfig b/drivers/staging/gma500/Kconfig
index 5501eb9..ce8beda 100644
--- a/drivers/staging/gma500/Kconfig
+++ b/drivers/staging/gma500/Kconfig
@@ -1,6 +1,6 @@
config DRM_PSB
tristate "Intel GMA500 KMS Framebuffer"
- depends on DRM && PCI
+ depends on DRM && PCI && X86
select FB_CFB_COPYAREA
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 3397356..aaa81883 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -317,8 +317,6 @@
static const struct ethtool_ops ethtool_ops = {
.get_drvinfo = netvsc_get_drvinfo,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
.get_link = ethtool_op_get_link,
};
@@ -406,6 +404,7 @@
net->netdev_ops = &device_ops;
/* TODO: Add GSO and Checksum offload */
+ net->hw_features = NETIF_F_SG;
net->features = NETIF_F_SG;
SET_ETHTOOL_OPS(net, ðtool_ops);
diff --git a/drivers/staging/intel_sst/intelmid_v1_control.c b/drivers/staging/intel_sst/intelmid_v1_control.c
index 9cc15c1..1ea8142 100644
--- a/drivers/staging/intel_sst/intelmid_v1_control.c
+++ b/drivers/staging/intel_sst/intelmid_v1_control.c
@@ -28,6 +28,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/file.h>
#include <asm/mrst.h>
#include <sound/pcm.h>
diff --git a/drivers/staging/intel_sst/intelmid_v2_control.c b/drivers/staging/intel_sst/intelmid_v2_control.c
index 26d815a6..3c6b3ab 100644
--- a/drivers/staging/intel_sst/intelmid_v2_control.c
+++ b/drivers/staging/intel_sst/intelmid_v2_control.c
@@ -29,6 +29,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/file.h>
#include "intel_sst.h"
#include "intelmid_snd_control.h"
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index b5d21f6..22c04ea 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -12,6 +12,7 @@
*/
#include <linux/cs5535.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <asm/olpc.h>
#include "olpc_dcon.h"
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index c93ef207..c0f0ac7 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -29,6 +29,7 @@
#include <linux/slab.h>
#include <linux/statfs.h>
#include <linux/writeback.h>
+#include <linux/prefetch.h>
#include "netfs.h"
diff --git a/drivers/staging/rts_pstor/debug.h b/drivers/staging/rts_pstor/debug.h
index e1408b0..ab305be 100644
--- a/drivers/staging/rts_pstor/debug.h
+++ b/drivers/staging/rts_pstor/debug.h
@@ -28,7 +28,7 @@
#define RTSX_STOR "rts_pstor: "
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
#define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
#define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
#define RTSX_DEBUGPX(x...) printk(x)
diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c
index 810e170..d89795c 100644
--- a/drivers/staging/rts_pstor/ms.c
+++ b/drivers/staging/rts_pstor/ms.c
@@ -23,6 +23,7 @@
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
diff --git a/drivers/staging/rts_pstor/rtsx_chip.c b/drivers/staging/rts_pstor/rtsx_chip.c
index d2f1c71..4e60780 100644
--- a/drivers/staging/rts_pstor/rtsx_chip.c
+++ b/drivers/staging/rts_pstor/rtsx_chip.c
@@ -24,6 +24,7 @@
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
@@ -1311,11 +1312,11 @@
#ifdef SUPPORT_OCP
if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- #if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
}
- #endif
+#endif
if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
if (chip->card_exist & SD_CARD) {
diff --git a/drivers/staging/rts_pstor/rtsx_scsi.c b/drivers/staging/rts_pstor/rtsx_scsi.c
index 20c2464..7de1fae 100644
--- a/drivers/staging/rts_pstor/rtsx_scsi.c
+++ b/drivers/staging/rts_pstor/rtsx_scsi.c
@@ -23,6 +23,7 @@
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
diff --git a/drivers/staging/rts_pstor/sd.c b/drivers/staging/rts_pstor/sd.c
index 8d066bd..b1277a6 100644
--- a/drivers/staging/rts_pstor/sd.c
+++ b/drivers/staging/rts_pstor/sd.c
@@ -909,7 +909,7 @@
RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
} else {
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
rtsx_read_register(chip, SD_VP_CTL, &val);
RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
rtsx_read_register(chip, SD_DCMPS_CTL, &val);
@@ -958,7 +958,7 @@
return STATUS_SUCCESS;
Fail:
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
rtsx_read_register(chip, SD_VP_CTL, &val);
RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
rtsx_read_register(chip, SD_DCMPS_CTL, &val);
diff --git a/drivers/staging/rts_pstor/trace.h b/drivers/staging/rts_pstor/trace.h
index 2c668ba..bc83b49 100644
--- a/drivers/staging/rts_pstor/trace.h
+++ b/drivers/staging/rts_pstor/trace.h
@@ -82,7 +82,7 @@
#define TRACE_GOTO(chip, label) goto label
#endif
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
static inline void rtsx_dump(u8 *buf, int buf_len)
{
int i;
diff --git a/drivers/staging/rts_pstor/xd.c b/drivers/staging/rts_pstor/xd.c
index 7bcd468..9f3add1 100644
--- a/drivers/staging/rts_pstor/xd.c
+++ b/drivers/staging/rts_pstor/xd.c
@@ -23,6 +23,7 @@
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
diff --git a/drivers/staging/solo6x10/Kconfig b/drivers/staging/solo6x10/Kconfig
index 2cf77c9..03dcac4 100644
--- a/drivers/staging/solo6x10/Kconfig
+++ b/drivers/staging/solo6x10/Kconfig
@@ -2,6 +2,7 @@
tristate "Softlogic 6x10 MPEG codec cards"
depends on PCI && VIDEO_DEV && SND && I2C
select VIDEOBUF_DMA_SG
+ select SND_PCM
---help---
This driver supports the Softlogic based MPEG-4 and h.264 codec
codec cards.
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index 0f02a4b..4f4f133 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -876,8 +876,10 @@
}
/* kill threads related to this sdev, if v.c. exists */
- kthread_stop(vdev->ud.tcp_rx);
- kthread_stop(vdev->ud.tcp_tx);
+ if (vdev->ud.tcp_rx)
+ kthread_stop(vdev->ud.tcp_rx);
+ if (vdev->ud.tcp_tx)
+ kthread_stop(vdev->ud.tcp_tx);
usbip_uinfo("stop threads\n");
@@ -949,9 +951,6 @@
{
memset(vdev, 0, sizeof(*vdev));
- vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
- vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
-
vdev->ud.side = USBIP_VHCI;
vdev->ud.status = VDEV_ST_NULL;
/* vdev->ud.lock = SPIN_LOCK_UNLOCKED; */
@@ -1139,7 +1138,7 @@
usbip_uerr("create hcd failed\n");
return -ENOMEM;
}
-
+ hcd->has_tt = 1;
/* this is private data for vhci_hcd */
the_controller = hcd_to_vhci(hcd);
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 3f2459f..e2dadbd 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -21,6 +21,7 @@
#include "vhci.h"
#include <linux/in.h>
+#include <linux/kthread.h>
/* TODO: refine locking ?*/
@@ -220,13 +221,13 @@
vdev->ud.tcp_socket = socket;
vdev->ud.status = VDEV_ST_NOTASSIGNED;
- wake_up_process(vdev->ud.tcp_rx);
- wake_up_process(vdev->ud.tcp_tx);
-
spin_unlock(&vdev->ud.lock);
spin_unlock(&the_controller->lock);
/* end the lock */
+ vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+ vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+
rh_port_connect(rhport, speed);
return count;
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 6a71f52..7637839 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -273,7 +273,7 @@
}
int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_index)
+ u8 key_index, bool unicast, bool multicast)
{
wlandevice_t *wlandev = dev->ml_priv;
diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig
index 9ef2dbb..5cb0f0e 100644
--- a/drivers/target/Kconfig
+++ b/drivers/target/Kconfig
@@ -30,5 +30,6 @@
passthrough access to Linux/SCSI device
source "drivers/target/loopback/Kconfig"
+source "drivers/target/tcm_fc/Kconfig"
endif
diff --git a/drivers/target/Makefile b/drivers/target/Makefile
index 1178bbf..21df808 100644
--- a/drivers/target/Makefile
+++ b/drivers/target/Makefile
@@ -24,3 +24,5 @@
# Fabric modules
obj-$(CONFIG_LOOPBACK_TARGET) += loopback/
+
+obj-$(CONFIG_TCM_FC) += tcm_fc/
diff --git a/drivers/target/tcm_fc/Kconfig b/drivers/target/tcm_fc/Kconfig
new file mode 100644
index 0000000..40caf45
--- /dev/null
+++ b/drivers/target/tcm_fc/Kconfig
@@ -0,0 +1,5 @@
+config TCM_FC
+ tristate "TCM_FC fabric Plugin"
+ depends on LIBFC
+ help
+ Say Y here to enable the TCM FC plugin for accessing FC fabrics in TCM
diff --git a/drivers/target/tcm_fc/Makefile b/drivers/target/tcm_fc/Makefile
new file mode 100644
index 0000000..7a5c2b6
--- /dev/null
+++ b/drivers/target/tcm_fc/Makefile
@@ -0,0 +1,15 @@
+EXTRA_CFLAGS += -I$(srctree)/drivers/target/ \
+ -I$(srctree)/drivers/scsi/ \
+ -I$(srctree)/include/scsi/ \
+ -I$(srctree)/drivers/target/tcm_fc/
+
+tcm_fc-y += tfc_cmd.o \
+ tfc_conf.o \
+ tfc_io.o \
+ tfc_sess.o
+
+obj-$(CONFIG_TCM_FC) += tcm_fc.o
+
+ifdef CONFIGFS_TCM_FC_DEBUG
+EXTRA_CFLAGS += -DTCM_FC_DEBUG
+endif
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
new file mode 100644
index 0000000..defff32
--- /dev/null
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __TCM_FC_H__
+#define __TCM_FC_H__
+
+#define FT_VERSION "0.3"
+
+#define FT_NAMELEN 32 /* length of ASCII WWPNs including pad */
+#define FT_TPG_NAMELEN 32 /* max length of TPG name */
+#define FT_LUN_NAMELEN 32 /* max length of LUN name */
+
+/*
+ * Debug options.
+ */
+#define FT_DEBUG_CONF 0x01 /* configuration messages */
+#define FT_DEBUG_SESS 0x02 /* session messages */
+#define FT_DEBUG_TM 0x04 /* TM operations */
+#define FT_DEBUG_IO 0x08 /* I/O commands */
+#define FT_DEBUG_DATA 0x10 /* Data transfer */
+
+extern unsigned int ft_debug_logging; /* debug options */
+
+#define FT_DEBUG(mask, fmt, args...) \
+ do { \
+ if (ft_debug_logging & (mask)) \
+ printk(KERN_INFO "tcm_fc: %s: " fmt, \
+ __func__, ##args); \
+ } while (0)
+
+#define FT_CONF_DBG(fmt, args...) FT_DEBUG(FT_DEBUG_CONF, fmt, ##args)
+#define FT_SESS_DBG(fmt, args...) FT_DEBUG(FT_DEBUG_SESS, fmt, ##args)
+#define FT_TM_DBG(fmt, args...) FT_DEBUG(FT_DEBUG_TM, fmt, ##args)
+#define FT_IO_DBG(fmt, args...) FT_DEBUG(FT_DEBUG_IO, fmt, ##args)
+#define FT_DATA_DBG(fmt, args...) FT_DEBUG(FT_DEBUG_DATA, fmt, ##args)
+
+struct ft_transport_id {
+ __u8 format;
+ __u8 __resvd1[7];
+ __u8 wwpn[8];
+ __u8 __resvd2[8];
+} __attribute__((__packed__));
+
+/*
+ * Session (remote port).
+ */
+struct ft_sess {
+ u32 port_id; /* for hash lookup use only */
+ u32 params;
+ u16 max_frame; /* maximum frame size */
+ u64 port_name; /* port name for transport ID */
+ struct ft_tport *tport;
+ struct se_session *se_sess;
+ struct hlist_node hash; /* linkage in ft_sess_hash table */
+ struct rcu_head rcu;
+ struct kref kref; /* ref for hash and outstanding I/Os */
+};
+
+/*
+ * Hash table of sessions per local port.
+ * Hash lookup by remote port FC_ID.
+ */
+#define FT_SESS_HASH_BITS 6
+#define FT_SESS_HASH_SIZE (1 << FT_SESS_HASH_BITS)
+
+/*
+ * Per local port data.
+ * This is created only after a TPG exists that allows target function
+ * for the local port. If the TPG exists, this is allocated when
+ * we're notified that the local port has been created, or when
+ * the first PRLI provider callback is received.
+ */
+struct ft_tport {
+ struct fc_lport *lport;
+ struct ft_tpg *tpg; /* NULL if TPG deleted before tport */
+ u32 sess_count; /* number of sessions in hash */
+ struct rcu_head rcu;
+ struct hlist_head hash[FT_SESS_HASH_SIZE]; /* list of sessions */
+};
+
+/*
+ * Node ID and authentication.
+ */
+struct ft_node_auth {
+ u64 port_name;
+ u64 node_name;
+};
+
+/*
+ * Node ACL for FC remote port session.
+ */
+struct ft_node_acl {
+ struct ft_node_auth node_auth;
+ struct se_node_acl se_node_acl;
+};
+
+struct ft_lun {
+ u32 index;
+ char name[FT_LUN_NAMELEN];
+};
+
+/*
+ * Target portal group (local port).
+ */
+struct ft_tpg {
+ u32 index;
+ struct ft_lport_acl *lport_acl;
+ struct ft_tport *tport; /* active tport or NULL */
+ struct list_head list; /* linkage in ft_lport_acl tpg_list */
+ struct list_head lun_list; /* head of LUNs */
+ struct se_portal_group se_tpg;
+ struct task_struct *thread; /* processing thread */
+ struct se_queue_obj qobj; /* queue for processing thread */
+};
+
+struct ft_lport_acl {
+ u64 wwpn;
+ char name[FT_NAMELEN];
+ struct list_head list;
+ struct list_head tpg_list;
+ struct se_wwn fc_lport_wwn;
+};
+
+enum ft_cmd_state {
+ FC_CMD_ST_NEW = 0,
+ FC_CMD_ST_REJ
+};
+
+/*
+ * Commands
+ */
+struct ft_cmd {
+ enum ft_cmd_state state;
+ u16 lun; /* LUN from request */
+ struct ft_sess *sess; /* session held for cmd */
+ struct fc_seq *seq; /* sequence in exchange mgr */
+ struct se_cmd se_cmd; /* Local TCM I/O descriptor */
+ struct fc_frame *req_frame;
+ unsigned char *cdb; /* pointer to CDB inside frame */
+ u32 write_data_len; /* data received on writes */
+ struct se_queue_req se_req;
+ /* Local sense buffer */
+ unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER];
+ u32 was_ddp_setup:1; /* Set only if ddp is setup */
+ struct scatterlist *sg; /* Set only if DDP is setup */
+ u32 sg_cnt; /* No. of item in scatterlist */
+};
+
+extern struct list_head ft_lport_list;
+extern struct mutex ft_lport_lock;
+extern struct fc4_prov ft_prov;
+extern struct target_fabric_configfs *ft_configfs;
+
+/*
+ * Fabric methods.
+ */
+
+/*
+ * Session ops.
+ */
+void ft_sess_put(struct ft_sess *);
+int ft_sess_shutdown(struct se_session *);
+void ft_sess_close(struct se_session *);
+void ft_sess_stop(struct se_session *, int, int);
+int ft_sess_logged_in(struct se_session *);
+u32 ft_sess_get_index(struct se_session *);
+u32 ft_sess_get_port_name(struct se_session *, unsigned char *, u32);
+void ft_sess_set_erl0(struct se_session *);
+
+void ft_lport_add(struct fc_lport *, void *);
+void ft_lport_del(struct fc_lport *, void *);
+int ft_lport_notify(struct notifier_block *, unsigned long, void *);
+
+/*
+ * IO methods.
+ */
+void ft_check_stop_free(struct se_cmd *);
+void ft_release_cmd(struct se_cmd *);
+int ft_queue_status(struct se_cmd *);
+int ft_queue_data_in(struct se_cmd *);
+int ft_write_pending(struct se_cmd *);
+int ft_write_pending_status(struct se_cmd *);
+u32 ft_get_task_tag(struct se_cmd *);
+int ft_get_cmd_state(struct se_cmd *);
+void ft_new_cmd_failure(struct se_cmd *);
+int ft_queue_tm_resp(struct se_cmd *);
+int ft_is_state_remove(struct se_cmd *);
+
+/*
+ * other internal functions.
+ */
+int ft_thread(void *);
+void ft_recv_req(struct ft_sess *, struct fc_frame *);
+struct ft_tpg *ft_lport_find_tpg(struct fc_lport *);
+struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *);
+
+void ft_recv_write_data(struct ft_cmd *, struct fc_frame *);
+void ft_dump_cmd(struct ft_cmd *, const char *caller);
+
+ssize_t ft_format_wwn(char *, size_t, u64);
+
+#endif /* __TCM_FC_H__ */
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
new file mode 100644
index 0000000..49e5177
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -0,0 +1,696 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* XXX TBD some includes may be extraneous */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/hash.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_encode.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/target_core_tmr.h>
+#include <target/configfs_macros.h>
+
+#include "tcm_fc.h"
+
+/*
+ * Dump cmd state for debugging.
+ */
+void ft_dump_cmd(struct ft_cmd *cmd, const char *caller)
+{
+ struct fc_exch *ep;
+ struct fc_seq *sp;
+ struct se_cmd *se_cmd;
+ struct se_mem *mem;
+ struct se_transport_task *task;
+
+ if (!(ft_debug_logging & FT_DEBUG_IO))
+ return;
+
+ se_cmd = &cmd->se_cmd;
+ printk(KERN_INFO "%s: cmd %p state %d sess %p seq %p se_cmd %p\n",
+ caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd);
+ printk(KERN_INFO "%s: cmd %p cdb %p\n",
+ caller, cmd, cmd->cdb);
+ printk(KERN_INFO "%s: cmd %p lun %d\n", caller, cmd, cmd->lun);
+
+ task = T_TASK(se_cmd);
+ printk(KERN_INFO "%s: cmd %p task %p se_num %u buf %p len %u se_cmd_flags <0x%x>\n",
+ caller, cmd, task, task->t_tasks_se_num,
+ task->t_task_buf, se_cmd->data_length, se_cmd->se_cmd_flags);
+ if (task->t_mem_list)
+ list_for_each_entry(mem, task->t_mem_list, se_list)
+ printk(KERN_INFO "%s: cmd %p mem %p page %p "
+ "len 0x%x off 0x%x\n",
+ caller, cmd, mem,
+ mem->se_page, mem->se_len, mem->se_off);
+ sp = cmd->seq;
+ if (sp) {
+ ep = fc_seq_exch(sp);
+ printk(KERN_INFO "%s: cmd %p sid %x did %x "
+ "ox_id %x rx_id %x seq_id %x e_stat %x\n",
+ caller, cmd, ep->sid, ep->did, ep->oxid, ep->rxid,
+ sp->id, ep->esb_stat);
+ }
+ print_hex_dump(KERN_INFO, "ft_dump_cmd ", DUMP_PREFIX_NONE,
+ 16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
+}
+
+/*
+ * Get LUN from CDB.
+ */
+static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp)
+{
+ u64 lun;
+
+ lun = lunp[1];
+ switch (lunp[0] >> 6) {
+ case 0:
+ break;
+ case 1:
+ lun |= (lunp[0] & 0x3f) << 8;
+ break;
+ default:
+ return -1;
+ }
+ if (lun >= TRANSPORT_MAX_LUNS_PER_TPG)
+ return -1;
+ cmd->lun = lun;
+ return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun);
+}
+
+static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
+{
+ struct se_queue_obj *qobj;
+ unsigned long flags;
+
+ qobj = &sess->tport->tpg->qobj;
+ spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
+ list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list);
+ spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
+ atomic_inc(&qobj->queue_cnt);
+ wake_up_interruptible(&qobj->thread_wq);
+}
+
+static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj)
+{
+ unsigned long flags;
+ struct se_queue_req *qr;
+
+ spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
+ if (list_empty(&qobj->qobj_list)) {
+ spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
+ return NULL;
+ }
+ qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list);
+ list_del(&qr->qr_list);
+ atomic_dec(&qobj->queue_cnt);
+ spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
+ return container_of(qr, struct ft_cmd, se_req);
+}
+
+static void ft_free_cmd(struct ft_cmd *cmd)
+{
+ struct fc_frame *fp;
+ struct fc_lport *lport;
+
+ if (!cmd)
+ return;
+ fp = cmd->req_frame;
+ lport = fr_dev(fp);
+ if (fr_seq(fp))
+ lport->tt.seq_release(fr_seq(fp));
+ fc_frame_free(fp);
+ ft_sess_put(cmd->sess); /* undo get from lookup at recv */
+ kfree(cmd);
+}
+
+void ft_release_cmd(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+ ft_free_cmd(cmd);
+}
+
+void ft_check_stop_free(struct se_cmd *se_cmd)
+{
+ transport_generic_free_cmd(se_cmd, 0, 1, 0);
+}
+
+/*
+ * Send response.
+ */
+int ft_queue_status(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ struct fc_frame *fp;
+ struct fcp_resp_with_ext *fcp;
+ struct fc_lport *lport;
+ struct fc_exch *ep;
+ size_t len;
+
+ ft_dump_cmd(cmd, __func__);
+ ep = fc_seq_exch(cmd->seq);
+ lport = ep->lp;
+ len = sizeof(*fcp) + se_cmd->scsi_sense_length;
+ fp = fc_frame_alloc(lport, len);
+ if (!fp) {
+ /* XXX shouldn't just drop it - requeue and retry? */
+ return 0;
+ }
+ fcp = fc_frame_payload_get(fp, len);
+ memset(fcp, 0, len);
+ fcp->resp.fr_status = se_cmd->scsi_status;
+
+ len = se_cmd->scsi_sense_length;
+ if (len) {
+ fcp->resp.fr_flags |= FCP_SNS_LEN_VAL;
+ fcp->ext.fr_sns_len = htonl(len);
+ memcpy((fcp + 1), se_cmd->sense_buffer, len);
+ }
+
+ /*
+ * Test underflow and overflow with one mask. Usually both are off.
+ * Bidirectional commands are not handled yet.
+ */
+ if (se_cmd->se_cmd_flags & (SCF_OVERFLOW_BIT | SCF_UNDERFLOW_BIT)) {
+ if (se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT)
+ fcp->resp.fr_flags |= FCP_RESID_OVER;
+ else
+ fcp->resp.fr_flags |= FCP_RESID_UNDER;
+ fcp->ext.fr_resid = cpu_to_be32(se_cmd->residual_count);
+ }
+
+ /*
+ * Send response.
+ */
+ cmd->seq = lport->tt.seq_start_next(cmd->seq);
+ fc_fill_fc_hdr(fp, FC_RCTL_DD_CMD_STATUS, ep->did, ep->sid, FC_TYPE_FCP,
+ FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ, 0);
+
+ lport->tt.seq_send(lport, cmd->seq, fp);
+ lport->tt.exch_done(cmd->seq);
+ return 0;
+}
+
+int ft_write_pending_status(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+ return cmd->write_data_len != se_cmd->data_length;
+}
+
+/*
+ * Send TX_RDY (transfer ready).
+ */
+int ft_write_pending(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ struct fc_frame *fp;
+ struct fcp_txrdy *txrdy;
+ struct fc_lport *lport;
+ struct fc_exch *ep;
+ struct fc_frame_header *fh;
+ u32 f_ctl;
+
+ ft_dump_cmd(cmd, __func__);
+
+ ep = fc_seq_exch(cmd->seq);
+ lport = ep->lp;
+ fp = fc_frame_alloc(lport, sizeof(*txrdy));
+ if (!fp)
+ return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES;
+
+ txrdy = fc_frame_payload_get(fp, sizeof(*txrdy));
+ memset(txrdy, 0, sizeof(*txrdy));
+ txrdy->ft_burst_len = htonl(se_cmd->data_length);
+
+ cmd->seq = lport->tt.seq_start_next(cmd->seq);
+ fc_fill_fc_hdr(fp, FC_RCTL_DD_DATA_DESC, ep->did, ep->sid, FC_TYPE_FCP,
+ FC_FC_EX_CTX | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
+
+ fh = fc_frame_header_get(fp);
+ f_ctl = ntoh24(fh->fh_f_ctl);
+
+ /* Only if it is 'Exchange Responder' */
+ if (f_ctl & FC_FC_EX_CTX) {
+ /* Target is 'exchange responder' and sending XFER_READY
+ * to 'exchange initiator (initiator)'
+ */
+ if ((ep->xid <= lport->lro_xid) &&
+ (fh->fh_r_ctl == FC_RCTL_DD_DATA_DESC)) {
+ if (se_cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) {
+ /*
+ * Map se_mem list to scatterlist, so that
+ * DDP can be setup. DDP setup function require
+ * scatterlist. se_mem_list is internal to
+ * TCM/LIO target
+ */
+ transport_do_task_sg_chain(se_cmd);
+ cmd->sg = T_TASK(se_cmd)->t_tasks_sg_chained;
+ cmd->sg_cnt =
+ T_TASK(se_cmd)->t_tasks_sg_chained_no;
+ }
+ if (cmd->sg && lport->tt.ddp_setup(lport, ep->xid,
+ cmd->sg, cmd->sg_cnt))
+ cmd->was_ddp_setup = 1;
+ }
+ }
+ lport->tt.seq_send(lport, cmd->seq, fp);
+ return 0;
+}
+
+u32 ft_get_task_tag(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+ return fc_seq_exch(cmd->seq)->rxid;
+}
+
+int ft_get_cmd_state(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+ return cmd->state;
+}
+
+int ft_is_state_remove(struct se_cmd *se_cmd)
+{
+ return 0; /* XXX TBD */
+}
+
+void ft_new_cmd_failure(struct se_cmd *se_cmd)
+{
+ /* XXX TBD */
+ printk(KERN_INFO "%s: se_cmd %p\n", __func__, se_cmd);
+}
+
+/*
+ * FC sequence response handler for follow-on sequences (data) and aborts.
+ */
+static void ft_recv_seq(struct fc_seq *sp, struct fc_frame *fp, void *arg)
+{
+ struct ft_cmd *cmd = arg;
+ struct fc_frame_header *fh;
+
+ if (IS_ERR(fp)) {
+ /* XXX need to find cmd if queued */
+ cmd->se_cmd.t_state = TRANSPORT_REMOVE;
+ cmd->seq = NULL;
+ transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
+ return;
+ }
+
+ fh = fc_frame_header_get(fp);
+
+ switch (fh->fh_r_ctl) {
+ case FC_RCTL_DD_SOL_DATA: /* write data */
+ ft_recv_write_data(cmd, fp);
+ break;
+ case FC_RCTL_DD_UNSOL_CTL: /* command */
+ case FC_RCTL_DD_SOL_CTL: /* transfer ready */
+ case FC_RCTL_DD_DATA_DESC: /* transfer ready */
+ default:
+ printk(KERN_INFO "%s: unhandled frame r_ctl %x\n",
+ __func__, fh->fh_r_ctl);
+ fc_frame_free(fp);
+ transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
+ break;
+ }
+}
+
+/*
+ * Send a FCP response including SCSI status and optional FCP rsp_code.
+ * status is SAM_STAT_GOOD (zero) iff code is valid.
+ * This is used in error cases, such as allocation failures.
+ */
+static void ft_send_resp_status(struct fc_lport *lport,
+ const struct fc_frame *rx_fp,
+ u32 status, enum fcp_resp_rsp_codes code)
+{
+ struct fc_frame *fp;
+ struct fc_seq *sp;
+ const struct fc_frame_header *fh;
+ size_t len;
+ struct fcp_resp_with_ext *fcp;
+ struct fcp_resp_rsp_info *info;
+
+ fh = fc_frame_header_get(rx_fp);
+ FT_IO_DBG("FCP error response: did %x oxid %x status %x code %x\n",
+ ntoh24(fh->fh_s_id), ntohs(fh->fh_ox_id), status, code);
+ len = sizeof(*fcp);
+ if (status == SAM_STAT_GOOD)
+ len += sizeof(*info);
+ fp = fc_frame_alloc(lport, len);
+ if (!fp)
+ return;
+ fcp = fc_frame_payload_get(fp, len);
+ memset(fcp, 0, len);
+ fcp->resp.fr_status = status;
+ if (status == SAM_STAT_GOOD) {
+ fcp->ext.fr_rsp_len = htonl(sizeof(*info));
+ fcp->resp.fr_flags |= FCP_RSP_LEN_VAL;
+ info = (struct fcp_resp_rsp_info *)(fcp + 1);
+ info->rsp_code = code;
+ }
+
+ fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_DD_CMD_STATUS, 0);
+ sp = fr_seq(fp);
+ if (sp)
+ lport->tt.seq_send(lport, sp, fp);
+ else
+ lport->tt.frame_send(lport, fp);
+}
+
+/*
+ * Send error or task management response.
+ * Always frees the cmd and associated state.
+ */
+static void ft_send_resp_code(struct ft_cmd *cmd, enum fcp_resp_rsp_codes code)
+{
+ ft_send_resp_status(cmd->sess->tport->lport,
+ cmd->req_frame, SAM_STAT_GOOD, code);
+ ft_free_cmd(cmd);
+}
+
+/*
+ * Handle Task Management Request.
+ */
+static void ft_send_tm(struct ft_cmd *cmd)
+{
+ struct se_tmr_req *tmr;
+ struct fcp_cmnd *fcp;
+ u8 tm_func;
+
+ fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
+
+ switch (fcp->fc_tm_flags) {
+ case FCP_TMF_LUN_RESET:
+ tm_func = TMR_LUN_RESET;
+ if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) {
+ ft_dump_cmd(cmd, __func__);
+ transport_send_check_condition_and_sense(&cmd->se_cmd,
+ cmd->se_cmd.scsi_sense_reason, 0);
+ ft_sess_put(cmd->sess);
+ return;
+ }
+ break;
+ case FCP_TMF_TGT_RESET:
+ tm_func = TMR_TARGET_WARM_RESET;
+ break;
+ case FCP_TMF_CLR_TASK_SET:
+ tm_func = TMR_CLEAR_TASK_SET;
+ break;
+ case FCP_TMF_ABT_TASK_SET:
+ tm_func = TMR_ABORT_TASK_SET;
+ break;
+ case FCP_TMF_CLR_ACA:
+ tm_func = TMR_CLEAR_ACA;
+ break;
+ default:
+ /*
+ * FCP4r01 indicates having a combination of
+ * tm_flags set is invalid.
+ */
+ FT_TM_DBG("invalid FCP tm_flags %x\n", fcp->fc_tm_flags);
+ ft_send_resp_code(cmd, FCP_CMND_FIELDS_INVALID);
+ return;
+ }
+
+ FT_TM_DBG("alloc tm cmd fn %d\n", tm_func);
+ tmr = core_tmr_alloc_req(&cmd->se_cmd, cmd, tm_func);
+ if (!tmr) {
+ FT_TM_DBG("alloc failed\n");
+ ft_send_resp_code(cmd, FCP_TMF_FAILED);
+ return;
+ }
+ cmd->se_cmd.se_tmr_req = tmr;
+ transport_generic_handle_tmr(&cmd->se_cmd);
+}
+
+/*
+ * Send status from completed task management request.
+ */
+int ft_queue_tm_resp(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ struct se_tmr_req *tmr = se_cmd->se_tmr_req;
+ enum fcp_resp_rsp_codes code;
+
+ switch (tmr->response) {
+ case TMR_FUNCTION_COMPLETE:
+ code = FCP_TMF_CMPL;
+ break;
+ case TMR_LUN_DOES_NOT_EXIST:
+ code = FCP_TMF_INVALID_LUN;
+ break;
+ case TMR_FUNCTION_REJECTED:
+ code = FCP_TMF_REJECTED;
+ break;
+ case TMR_TASK_DOES_NOT_EXIST:
+ case TMR_TASK_STILL_ALLEGIANT:
+ case TMR_TASK_FAILOVER_NOT_SUPPORTED:
+ case TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED:
+ case TMR_FUNCTION_AUTHORIZATION_FAILED:
+ default:
+ code = FCP_TMF_FAILED;
+ break;
+ }
+ FT_TM_DBG("tmr fn %d resp %d fcp code %d\n",
+ tmr->function, tmr->response, code);
+ ft_send_resp_code(cmd, code);
+ return 0;
+}
+
+/*
+ * Handle incoming FCP command.
+ */
+static void ft_recv_cmd(struct ft_sess *sess, struct fc_frame *fp)
+{
+ struct ft_cmd *cmd;
+ struct fc_lport *lport = sess->tport->lport;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ if (!cmd)
+ goto busy;
+ cmd->sess = sess;
+ cmd->seq = lport->tt.seq_assign(lport, fp);
+ if (!cmd->seq) {
+ kfree(cmd);
+ goto busy;
+ }
+ cmd->req_frame = fp; /* hold frame during cmd */
+ ft_queue_cmd(sess, cmd);
+ return;
+
+busy:
+ FT_IO_DBG("cmd or seq allocation failure - sending BUSY\n");
+ ft_send_resp_status(lport, fp, SAM_STAT_BUSY, 0);
+ fc_frame_free(fp);
+ ft_sess_put(sess); /* undo get from lookup */
+}
+
+
+/*
+ * Handle incoming FCP frame.
+ * Caller has verified that the frame is type FCP.
+ */
+void ft_recv_req(struct ft_sess *sess, struct fc_frame *fp)
+{
+ struct fc_frame_header *fh = fc_frame_header_get(fp);
+
+ switch (fh->fh_r_ctl) {
+ case FC_RCTL_DD_UNSOL_CMD: /* command */
+ ft_recv_cmd(sess, fp);
+ break;
+ case FC_RCTL_DD_SOL_DATA: /* write data */
+ case FC_RCTL_DD_UNSOL_CTL:
+ case FC_RCTL_DD_SOL_CTL:
+ case FC_RCTL_DD_DATA_DESC: /* transfer ready */
+ case FC_RCTL_ELS4_REQ: /* SRR, perhaps */
+ default:
+ printk(KERN_INFO "%s: unhandled frame r_ctl %x\n",
+ __func__, fh->fh_r_ctl);
+ fc_frame_free(fp);
+ ft_sess_put(sess); /* undo get from lookup */
+ break;
+ }
+}
+
+/*
+ * Send new command to target.
+ */
+static void ft_send_cmd(struct ft_cmd *cmd)
+{
+ struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame);
+ struct se_cmd *se_cmd;
+ struct fcp_cmnd *fcp;
+ int data_dir;
+ u32 data_len;
+ int task_attr;
+ int ret;
+
+ fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
+ if (!fcp)
+ goto err;
+
+ if (fcp->fc_flags & FCP_CFL_LEN_MASK)
+ goto err; /* not handling longer CDBs yet */
+
+ if (fcp->fc_tm_flags) {
+ task_attr = FCP_PTA_SIMPLE;
+ data_dir = DMA_NONE;
+ data_len = 0;
+ } else {
+ switch (fcp->fc_flags & (FCP_CFL_RDDATA | FCP_CFL_WRDATA)) {
+ case 0:
+ data_dir = DMA_NONE;
+ break;
+ case FCP_CFL_RDDATA:
+ data_dir = DMA_FROM_DEVICE;
+ break;
+ case FCP_CFL_WRDATA:
+ data_dir = DMA_TO_DEVICE;
+ break;
+ case FCP_CFL_WRDATA | FCP_CFL_RDDATA:
+ goto err; /* TBD not supported by tcm_fc yet */
+ }
+
+ /* FCP_PTA_ maps 1:1 to TASK_ATTR_ */
+ task_attr = fcp->fc_pri_ta & FCP_PTA_MASK;
+ data_len = ntohl(fcp->fc_dl);
+ cmd->cdb = fcp->fc_cdb;
+ }
+
+ se_cmd = &cmd->se_cmd;
+ /*
+ * Initialize struct se_cmd descriptor from target_core_mod
+ * infrastructure
+ */
+ transport_init_se_cmd(se_cmd, &ft_configfs->tf_ops, cmd->sess->se_sess,
+ data_len, data_dir, task_attr,
+ &cmd->ft_sense_buffer[0]);
+ /*
+ * Check for FCP task management flags
+ */
+ if (fcp->fc_tm_flags) {
+ ft_send_tm(cmd);
+ return;
+ }
+
+ fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd);
+
+ ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun);
+ if (ret < 0) {
+ ft_dump_cmd(cmd, __func__);
+ transport_send_check_condition_and_sense(&cmd->se_cmd,
+ cmd->se_cmd.scsi_sense_reason, 0);
+ return;
+ }
+
+ ret = transport_generic_allocate_tasks(se_cmd, cmd->cdb);
+
+ FT_IO_DBG("r_ctl %x alloc task ret %d\n", fh->fh_r_ctl, ret);
+ ft_dump_cmd(cmd, __func__);
+
+ if (ret == -1) {
+ transport_send_check_condition_and_sense(se_cmd,
+ TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, 0);
+ transport_generic_free_cmd(se_cmd, 0, 1, 0);
+ return;
+ }
+ if (ret == -2) {
+ if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT)
+ ft_queue_status(se_cmd);
+ else
+ transport_send_check_condition_and_sense(se_cmd,
+ se_cmd->scsi_sense_reason, 0);
+ transport_generic_free_cmd(se_cmd, 0, 1, 0);
+ return;
+ }
+ transport_generic_handle_cdb(se_cmd);
+ return;
+
+err:
+ ft_send_resp_code(cmd, FCP_CMND_FIELDS_INVALID);
+ return;
+}
+
+/*
+ * Handle request in the command thread.
+ */
+static void ft_exec_req(struct ft_cmd *cmd)
+{
+ FT_IO_DBG("cmd state %x\n", cmd->state);
+ switch (cmd->state) {
+ case FC_CMD_ST_NEW:
+ ft_send_cmd(cmd);
+ break;
+ default:
+ break;
+ }
+}
+
+/*
+ * Processing thread.
+ * Currently one thread per tpg.
+ */
+int ft_thread(void *arg)
+{
+ struct ft_tpg *tpg = arg;
+ struct se_queue_obj *qobj = &tpg->qobj;
+ struct ft_cmd *cmd;
+ int ret;
+
+ set_user_nice(current, -20);
+
+ while (!kthread_should_stop()) {
+ ret = wait_event_interruptible(qobj->thread_wq,
+ atomic_read(&qobj->queue_cnt) || kthread_should_stop());
+ if (ret < 0 || kthread_should_stop())
+ goto out;
+ cmd = ft_dequeue_cmd(qobj);
+ if (cmd)
+ ft_exec_req(cmd);
+ }
+
+out:
+ return 0;
+}
diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c
new file mode 100644
index 0000000..fcdbbff
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_conf.c
@@ -0,0 +1,677 @@
+/*******************************************************************************
+ * Filename: tcm_fc.c
+ *
+ * This file contains the configfs implementation for TCM_fc fabric node.
+ * Based on tcm_loop_configfs.c
+ *
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ * Copyright (c) 2009,2010 Rising Tide, Inc.
+ * Copyright (c) 2009,2010 Linux-iSCSI.org
+ *
+ * Copyright (c) 2009,2010 Nicholas A. Bellinger <nab@linux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ ****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_fabric_configfs.h>
+#include <target/target_core_fabric_lib.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/configfs_macros.h>
+
+#include "tcm_fc.h"
+
+struct target_fabric_configfs *ft_configfs;
+
+LIST_HEAD(ft_lport_list);
+DEFINE_MUTEX(ft_lport_lock);
+
+unsigned int ft_debug_logging;
+module_param_named(debug_logging, ft_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+
+/*
+ * Parse WWN.
+ * If strict, we require lower-case hex and colon separators to be sure
+ * the name is the same as what would be generated by ft_format_wwn()
+ * so the name and wwn are mapped one-to-one.
+ */
+static ssize_t ft_parse_wwn(const char *name, u64 *wwn, int strict)
+{
+ const char *cp;
+ char c;
+ u32 nibble;
+ u32 byte = 0;
+ u32 pos = 0;
+ u32 err;
+
+ *wwn = 0;
+ for (cp = name; cp < &name[FT_NAMELEN - 1]; cp++) {
+ c = *cp;
+ if (c == '\n' && cp[1] == '\0')
+ continue;
+ if (strict && pos++ == 2 && byte++ < 7) {
+ pos = 0;
+ if (c == ':')
+ continue;
+ err = 1;
+ goto fail;
+ }
+ if (c == '\0') {
+ err = 2;
+ if (strict && byte != 8)
+ goto fail;
+ return cp - name;
+ }
+ err = 3;
+ if (isdigit(c))
+ nibble = c - '0';
+ else if (isxdigit(c) && (islower(c) || !strict))
+ nibble = tolower(c) - 'a' + 10;
+ else
+ goto fail;
+ *wwn = (*wwn << 4) | nibble;
+ }
+ err = 4;
+fail:
+ FT_CONF_DBG("err %u len %zu pos %u byte %u\n",
+ err, cp - name, pos, byte);
+ return -1;
+}
+
+ssize_t ft_format_wwn(char *buf, size_t len, u64 wwn)
+{
+ u8 b[8];
+
+ put_unaligned_be64(wwn, b);
+ return snprintf(buf, len,
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
+ b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
+}
+
+static ssize_t ft_wwn_show(void *arg, char *buf)
+{
+ u64 *wwn = arg;
+ ssize_t len;
+
+ len = ft_format_wwn(buf, PAGE_SIZE - 2, *wwn);
+ buf[len++] = '\n';
+ return len;
+}
+
+static ssize_t ft_wwn_store(void *arg, const char *buf, size_t len)
+{
+ ssize_t ret;
+ u64 wwn;
+
+ ret = ft_parse_wwn(buf, &wwn, 0);
+ if (ret > 0)
+ *(u64 *)arg = wwn;
+ return ret;
+}
+
+/*
+ * ACL auth ops.
+ */
+
+static ssize_t ft_nacl_show_port_name(
+ struct se_node_acl *se_nacl,
+ char *page)
+{
+ struct ft_node_acl *acl = container_of(se_nacl,
+ struct ft_node_acl, se_node_acl);
+
+ return ft_wwn_show(&acl->node_auth.port_name, page);
+}
+
+static ssize_t ft_nacl_store_port_name(
+ struct se_node_acl *se_nacl,
+ const char *page,
+ size_t count)
+{
+ struct ft_node_acl *acl = container_of(se_nacl,
+ struct ft_node_acl, se_node_acl);
+
+ return ft_wwn_store(&acl->node_auth.port_name, page, count);
+}
+
+TF_NACL_BASE_ATTR(ft, port_name, S_IRUGO | S_IWUSR);
+
+static ssize_t ft_nacl_show_node_name(
+ struct se_node_acl *se_nacl,
+ char *page)
+{
+ struct ft_node_acl *acl = container_of(se_nacl,
+ struct ft_node_acl, se_node_acl);
+
+ return ft_wwn_show(&acl->node_auth.node_name, page);
+}
+
+static ssize_t ft_nacl_store_node_name(
+ struct se_node_acl *se_nacl,
+ const char *page,
+ size_t count)
+{
+ struct ft_node_acl *acl = container_of(se_nacl,
+ struct ft_node_acl, se_node_acl);
+
+ return ft_wwn_store(&acl->node_auth.node_name, page, count);
+}
+
+TF_NACL_BASE_ATTR(ft, node_name, S_IRUGO | S_IWUSR);
+
+static struct configfs_attribute *ft_nacl_base_attrs[] = {
+ &ft_nacl_port_name.attr,
+ &ft_nacl_node_name.attr,
+ NULL,
+};
+
+/*
+ * ACL ops.
+ */
+
+/*
+ * Add ACL for an initiator. The ACL is named arbitrarily.
+ * The port_name and/or node_name are attributes.
+ */
+static struct se_node_acl *ft_add_acl(
+ struct se_portal_group *se_tpg,
+ struct config_group *group,
+ const char *name)
+{
+ struct ft_node_acl *acl;
+ struct ft_tpg *tpg;
+ u64 wwpn;
+ u32 q_depth;
+
+ FT_CONF_DBG("add acl %s\n", name);
+ tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+
+ if (ft_parse_wwn(name, &wwpn, 1) < 0)
+ return ERR_PTR(-EINVAL);
+
+ acl = kzalloc(sizeof(struct ft_node_acl), GFP_KERNEL);
+ if (!(acl))
+ return ERR_PTR(-ENOMEM);
+ acl->node_auth.port_name = wwpn;
+
+ q_depth = 32; /* XXX bogus default - get from tpg? */
+ return core_tpg_add_initiator_node_acl(&tpg->se_tpg,
+ &acl->se_node_acl, name, q_depth);
+}
+
+static void ft_del_acl(struct se_node_acl *se_acl)
+{
+ struct se_portal_group *se_tpg = se_acl->se_tpg;
+ struct ft_tpg *tpg;
+ struct ft_node_acl *acl = container_of(se_acl,
+ struct ft_node_acl, se_node_acl);
+
+ FT_CONF_DBG("del acl %s\n",
+ config_item_name(&se_acl->acl_group.cg_item));
+
+ tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+ FT_CONF_DBG("del acl %p se_acl %p tpg %p se_tpg %p\n",
+ acl, se_acl, tpg, &tpg->se_tpg);
+
+ core_tpg_del_initiator_node_acl(&tpg->se_tpg, se_acl, 1);
+ kfree(acl);
+}
+
+struct ft_node_acl *ft_acl_get(struct ft_tpg *tpg, struct fc_rport_priv *rdata)
+{
+ struct ft_node_acl *found = NULL;
+ struct ft_node_acl *acl;
+ struct se_portal_group *se_tpg = &tpg->se_tpg;
+ struct se_node_acl *se_acl;
+
+ spin_lock_bh(&se_tpg->acl_node_lock);
+ list_for_each_entry(se_acl, &se_tpg->acl_node_list, acl_list) {
+ acl = container_of(se_acl, struct ft_node_acl, se_node_acl);
+ FT_CONF_DBG("acl %p port_name %llx\n",
+ acl, (unsigned long long)acl->node_auth.port_name);
+ if (acl->node_auth.port_name == rdata->ids.port_name ||
+ acl->node_auth.node_name == rdata->ids.node_name) {
+ FT_CONF_DBG("acl %p port_name %llx matched\n", acl,
+ (unsigned long long)rdata->ids.port_name);
+ found = acl;
+ /* XXX need to hold onto ACL */
+ break;
+ }
+ }
+ spin_unlock_bh(&se_tpg->acl_node_lock);
+ return found;
+}
+
+struct se_node_acl *ft_tpg_alloc_fabric_acl(struct se_portal_group *se_tpg)
+{
+ struct ft_node_acl *acl;
+
+ acl = kzalloc(sizeof(*acl), GFP_KERNEL);
+ if (!(acl)) {
+ printk(KERN_ERR "Unable to allocate struct ft_node_acl\n");
+ return NULL;
+ }
+ FT_CONF_DBG("acl %p\n", acl);
+ return &acl->se_node_acl;
+}
+
+static void ft_tpg_release_fabric_acl(struct se_portal_group *se_tpg,
+ struct se_node_acl *se_acl)
+{
+ struct ft_node_acl *acl = container_of(se_acl,
+ struct ft_node_acl, se_node_acl);
+
+ FT_CONF_DBG(KERN_INFO "acl %p\n", acl);
+ kfree(acl);
+}
+
+/*
+ * local_port port_group (tpg) ops.
+ */
+static struct se_portal_group *ft_add_tpg(
+ struct se_wwn *wwn,
+ struct config_group *group,
+ const char *name)
+{
+ struct ft_lport_acl *lacl;
+ struct ft_tpg *tpg;
+ unsigned long index;
+ int ret;
+
+ FT_CONF_DBG("tcm_fc: add tpg %s\n", name);
+
+ /*
+ * Name must be "tpgt_" followed by the index.
+ */
+ if (strstr(name, "tpgt_") != name)
+ return NULL;
+ if (strict_strtoul(name + 5, 10, &index) || index > UINT_MAX)
+ return NULL;
+
+ lacl = container_of(wwn, struct ft_lport_acl, fc_lport_wwn);
+ tpg = kzalloc(sizeof(*tpg), GFP_KERNEL);
+ if (!tpg)
+ return NULL;
+ tpg->index = index;
+ tpg->lport_acl = lacl;
+ INIT_LIST_HEAD(&tpg->lun_list);
+ transport_init_queue_obj(&tpg->qobj);
+
+ ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg,
+ (void *)tpg, TRANSPORT_TPG_TYPE_NORMAL);
+ if (ret < 0) {
+ kfree(tpg);
+ return NULL;
+ }
+
+ tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index);
+ if (IS_ERR(tpg->thread)) {
+ kfree(tpg);
+ return NULL;
+ }
+
+ mutex_lock(&ft_lport_lock);
+ list_add_tail(&tpg->list, &lacl->tpg_list);
+ mutex_unlock(&ft_lport_lock);
+
+ return &tpg->se_tpg;
+}
+
+static void ft_del_tpg(struct se_portal_group *se_tpg)
+{
+ struct ft_tpg *tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+
+ FT_CONF_DBG("del tpg %s\n",
+ config_item_name(&tpg->se_tpg.tpg_group.cg_item));
+
+ kthread_stop(tpg->thread);
+
+ /* Wait for sessions to be freed thru RCU, for BUG_ON below */
+ synchronize_rcu();
+
+ mutex_lock(&ft_lport_lock);
+ list_del(&tpg->list);
+ if (tpg->tport) {
+ tpg->tport->tpg = NULL;
+ tpg->tport = NULL;
+ }
+ mutex_unlock(&ft_lport_lock);
+
+ core_tpg_deregister(se_tpg);
+ kfree(tpg);
+}
+
+/*
+ * Verify that an lport is configured to use the tcm_fc module, and return
+ * the target port group that should be used.
+ *
+ * The caller holds ft_lport_lock.
+ */
+struct ft_tpg *ft_lport_find_tpg(struct fc_lport *lport)
+{
+ struct ft_lport_acl *lacl;
+ struct ft_tpg *tpg;
+
+ list_for_each_entry(lacl, &ft_lport_list, list) {
+ if (lacl->wwpn == lport->wwpn) {
+ list_for_each_entry(tpg, &lacl->tpg_list, list)
+ return tpg; /* XXX for now return first entry */
+ return NULL;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * target config instance ops.
+ */
+
+/*
+ * Add lport to allowed config.
+ * The name is the WWPN in lower-case ASCII, colon-separated bytes.
+ */
+static struct se_wwn *ft_add_lport(
+ struct target_fabric_configfs *tf,
+ struct config_group *group,
+ const char *name)
+{
+ struct ft_lport_acl *lacl;
+ struct ft_lport_acl *old_lacl;
+ u64 wwpn;
+
+ FT_CONF_DBG("add lport %s\n", name);
+ if (ft_parse_wwn(name, &wwpn, 1) < 0)
+ return NULL;
+ lacl = kzalloc(sizeof(*lacl), GFP_KERNEL);
+ if (!lacl)
+ return NULL;
+ lacl->wwpn = wwpn;
+ INIT_LIST_HEAD(&lacl->tpg_list);
+
+ mutex_lock(&ft_lport_lock);
+ list_for_each_entry(old_lacl, &ft_lport_list, list) {
+ if (old_lacl->wwpn == wwpn) {
+ mutex_unlock(&ft_lport_lock);
+ kfree(lacl);
+ return NULL;
+ }
+ }
+ list_add_tail(&lacl->list, &ft_lport_list);
+ ft_format_wwn(lacl->name, sizeof(lacl->name), wwpn);
+ mutex_unlock(&ft_lport_lock);
+
+ return &lacl->fc_lport_wwn;
+}
+
+static void ft_del_lport(struct se_wwn *wwn)
+{
+ struct ft_lport_acl *lacl = container_of(wwn,
+ struct ft_lport_acl, fc_lport_wwn);
+
+ FT_CONF_DBG("del lport %s\n",
+ config_item_name(&wwn->wwn_group.cg_item));
+ mutex_lock(&ft_lport_lock);
+ list_del(&lacl->list);
+ mutex_unlock(&ft_lport_lock);
+
+ kfree(lacl);
+}
+
+static ssize_t ft_wwn_show_attr_version(
+ struct target_fabric_configfs *tf,
+ char *page)
+{
+ return sprintf(page, "TCM FC " FT_VERSION " on %s/%s on "
+ ""UTS_RELEASE"\n", utsname()->sysname, utsname()->machine);
+}
+
+TF_WWN_ATTR_RO(ft, version);
+
+static struct configfs_attribute *ft_wwn_attrs[] = {
+ &ft_wwn_version.attr,
+ NULL,
+};
+
+static char *ft_get_fabric_name(void)
+{
+ return "fc";
+}
+
+static char *ft_get_fabric_wwn(struct se_portal_group *se_tpg)
+{
+ struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
+
+ return tpg->lport_acl->name;
+}
+
+static u16 ft_get_tag(struct se_portal_group *se_tpg)
+{
+ struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
+
+ /*
+ * This tag is used when forming SCSI Name identifier in EVPD=1 0x83
+ * to represent the SCSI Target Port.
+ */
+ return tpg->index;
+}
+
+static u32 ft_get_default_depth(struct se_portal_group *se_tpg)
+{
+ return 1;
+}
+
+static int ft_check_false(struct se_portal_group *se_tpg)
+{
+ return 0;
+}
+
+static void ft_set_default_node_attr(struct se_node_acl *se_nacl)
+{
+}
+
+static u16 ft_get_fabric_sense_len(void)
+{
+ return 0;
+}
+
+static u16 ft_set_fabric_sense_len(struct se_cmd *se_cmd, u32 sense_len)
+{
+ return 0;
+}
+
+static u32 ft_tpg_get_inst_index(struct se_portal_group *se_tpg)
+{
+ struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
+
+ return tpg->index;
+}
+
+static u64 ft_pack_lun(unsigned int index)
+{
+ WARN_ON(index >= 256);
+ /* Caller wants this byte-swapped */
+ return cpu_to_le64((index & 0xff) << 8);
+}
+
+static struct target_core_fabric_ops ft_fabric_ops = {
+ .get_fabric_name = ft_get_fabric_name,
+ .get_fabric_proto_ident = fc_get_fabric_proto_ident,
+ .tpg_get_wwn = ft_get_fabric_wwn,
+ .tpg_get_tag = ft_get_tag,
+ .tpg_get_default_depth = ft_get_default_depth,
+ .tpg_get_pr_transport_id = fc_get_pr_transport_id,
+ .tpg_get_pr_transport_id_len = fc_get_pr_transport_id_len,
+ .tpg_parse_pr_out_transport_id = fc_parse_pr_out_transport_id,
+ .tpg_check_demo_mode = ft_check_false,
+ .tpg_check_demo_mode_cache = ft_check_false,
+ .tpg_check_demo_mode_write_protect = ft_check_false,
+ .tpg_check_prod_mode_write_protect = ft_check_false,
+ .tpg_alloc_fabric_acl = ft_tpg_alloc_fabric_acl,
+ .tpg_release_fabric_acl = ft_tpg_release_fabric_acl,
+ .tpg_get_inst_index = ft_tpg_get_inst_index,
+ .check_stop_free = ft_check_stop_free,
+ .release_cmd_to_pool = ft_release_cmd,
+ .release_cmd_direct = ft_release_cmd,
+ .shutdown_session = ft_sess_shutdown,
+ .close_session = ft_sess_close,
+ .stop_session = ft_sess_stop,
+ .fall_back_to_erl0 = ft_sess_set_erl0,
+ .sess_logged_in = ft_sess_logged_in,
+ .sess_get_index = ft_sess_get_index,
+ .sess_get_initiator_sid = NULL,
+ .write_pending = ft_write_pending,
+ .write_pending_status = ft_write_pending_status,
+ .set_default_node_attributes = ft_set_default_node_attr,
+ .get_task_tag = ft_get_task_tag,
+ .get_cmd_state = ft_get_cmd_state,
+ .new_cmd_failure = ft_new_cmd_failure,
+ .queue_data_in = ft_queue_data_in,
+ .queue_status = ft_queue_status,
+ .queue_tm_rsp = ft_queue_tm_resp,
+ .get_fabric_sense_len = ft_get_fabric_sense_len,
+ .set_fabric_sense_len = ft_set_fabric_sense_len,
+ .is_state_remove = ft_is_state_remove,
+ .pack_lun = ft_pack_lun,
+ /*
+ * Setup function pointers for generic logic in
+ * target_core_fabric_configfs.c
+ */
+ .fabric_make_wwn = &ft_add_lport,
+ .fabric_drop_wwn = &ft_del_lport,
+ .fabric_make_tpg = &ft_add_tpg,
+ .fabric_drop_tpg = &ft_del_tpg,
+ .fabric_post_link = NULL,
+ .fabric_pre_unlink = NULL,
+ .fabric_make_np = NULL,
+ .fabric_drop_np = NULL,
+ .fabric_make_nodeacl = &ft_add_acl,
+ .fabric_drop_nodeacl = &ft_del_acl,
+};
+
+int ft_register_configfs(void)
+{
+ struct target_fabric_configfs *fabric;
+ int ret;
+
+ /*
+ * Register the top level struct config_item_type with TCM core
+ */
+ fabric = target_fabric_configfs_init(THIS_MODULE, "fc");
+ if (!fabric) {
+ printk(KERN_INFO "%s: target_fabric_configfs_init() failed!\n",
+ __func__);
+ return -1;
+ }
+ fabric->tf_ops = ft_fabric_ops;
+
+ /* Allowing support for task_sg_chaining */
+ fabric->tf_ops.task_sg_chaining = 1;
+
+ /*
+ * Setup default attribute lists for various fabric->tf_cit_tmpl
+ */
+ TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = ft_wwn_attrs;
+ TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = NULL;
+ TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL;
+ TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL;
+ TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL;
+ TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs =
+ ft_nacl_base_attrs;
+ TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;
+ TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL;
+ TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL;
+ /*
+ * register the fabric for use within TCM
+ */
+ ret = target_fabric_configfs_register(fabric);
+ if (ret < 0) {
+ FT_CONF_DBG("target_fabric_configfs_register() for"
+ " FC Target failed!\n");
+ printk(KERN_INFO
+ "%s: target_fabric_configfs_register() failed!\n",
+ __func__);
+ target_fabric_configfs_free(fabric);
+ return -1;
+ }
+
+ /*
+ * Setup our local pointer to *fabric.
+ */
+ ft_configfs = fabric;
+ return 0;
+}
+
+void ft_deregister_configfs(void)
+{
+ if (!ft_configfs)
+ return;
+ target_fabric_configfs_deregister(ft_configfs);
+ ft_configfs = NULL;
+}
+
+static struct notifier_block ft_notifier = {
+ .notifier_call = ft_lport_notify
+};
+
+static int __init ft_init(void)
+{
+ if (ft_register_configfs())
+ return -1;
+ if (fc_fc4_register_provider(FC_TYPE_FCP, &ft_prov)) {
+ ft_deregister_configfs();
+ return -1;
+ }
+ blocking_notifier_chain_register(&fc_lport_notifier_head, &ft_notifier);
+ fc_lport_iterate(ft_lport_add, NULL);
+ return 0;
+}
+
+static void __exit ft_exit(void)
+{
+ blocking_notifier_chain_unregister(&fc_lport_notifier_head,
+ &ft_notifier);
+ fc_fc4_deregister_provider(FC_TYPE_FCP, &ft_prov);
+ fc_lport_iterate(ft_lport_del, NULL);
+ ft_deregister_configfs();
+ synchronize_rcu();
+}
+
+#ifdef MODULE
+MODULE_DESCRIPTION("FC TCM fabric driver " FT_VERSION);
+MODULE_LICENSE("GPL");
+module_init(ft_init);
+module_exit(ft_exit);
+#endif /* MODULE */
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
new file mode 100644
index 0000000..4c3c0ef
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * Portions based on tcm_loop_fabric_scsi.c and libfc/fc_fcp.c
+ *
+ * Copyright (c) 2007 Intel Corporation. All rights reserved.
+ * Copyright (c) 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2008 Mike Christie
+ * Copyright (c) 2009 Rising Tide, Inc.
+ * Copyright (c) 2009 Linux-iSCSI.org
+ * Copyright (c) 2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* XXX TBD some includes may be extraneous */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/hash.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_encode.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/configfs_macros.h>
+
+#include "tcm_fc.h"
+
+/*
+ * Deliver read data back to initiator.
+ * XXX TBD handle resource problems later.
+ */
+int ft_queue_data_in(struct se_cmd *se_cmd)
+{
+ struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ struct se_transport_task *task;
+ struct fc_frame *fp = NULL;
+ struct fc_exch *ep;
+ struct fc_lport *lport;
+ struct se_mem *mem;
+ size_t remaining;
+ u32 f_ctl = FC_FC_EX_CTX | FC_FC_REL_OFF;
+ u32 mem_off;
+ u32 fh_off = 0;
+ u32 frame_off = 0;
+ size_t frame_len = 0;
+ size_t mem_len;
+ size_t tlen;
+ size_t off_in_page;
+ struct page *page;
+ int use_sg;
+ int error;
+ void *page_addr;
+ void *from;
+ void *to = NULL;
+
+ ep = fc_seq_exch(cmd->seq);
+ lport = ep->lp;
+ cmd->seq = lport->tt.seq_start_next(cmd->seq);
+
+ task = T_TASK(se_cmd);
+ BUG_ON(!task);
+ remaining = se_cmd->data_length;
+
+ /*
+ * Setup to use first mem list entry if any.
+ */
+ if (task->t_tasks_se_num) {
+ mem = list_first_entry(task->t_mem_list,
+ struct se_mem, se_list);
+ mem_len = mem->se_len;
+ mem_off = mem->se_off;
+ page = mem->se_page;
+ } else {
+ mem = NULL;
+ mem_len = remaining;
+ mem_off = 0;
+ page = NULL;
+ }
+
+ /* no scatter/gather in skb for odd word length due to fc_seq_send() */
+ use_sg = !(remaining % 4);
+
+ while (remaining) {
+ if (!mem_len) {
+ BUG_ON(!mem);
+ mem = list_entry(mem->se_list.next,
+ struct se_mem, se_list);
+ mem_len = min((size_t)mem->se_len, remaining);
+ mem_off = mem->se_off;
+ page = mem->se_page;
+ }
+ if (!frame_len) {
+ /*
+ * If lport's has capability of Large Send Offload LSO)
+ * , then allow 'frame_len' to be as big as 'lso_max'
+ * if indicated transfer length is >= lport->lso_max
+ */
+ frame_len = (lport->seq_offload) ? lport->lso_max :
+ cmd->sess->max_frame;
+ frame_len = min(frame_len, remaining);
+ fp = fc_frame_alloc(lport, use_sg ? 0 : frame_len);
+ if (!fp)
+ return -ENOMEM;
+ to = fc_frame_payload_get(fp, 0);
+ fh_off = frame_off;
+ frame_off += frame_len;
+ /*
+ * Setup the frame's max payload which is used by base
+ * driver to indicate HW about max frame size, so that
+ * HW can do fragmentation appropriately based on
+ * "gso_max_size" of underline netdev.
+ */
+ fr_max_payload(fp) = cmd->sess->max_frame;
+ }
+ tlen = min(mem_len, frame_len);
+
+ if (use_sg) {
+ if (!mem) {
+ BUG_ON(!task->t_task_buf);
+ page_addr = task->t_task_buf + mem_off;
+ /*
+ * In this case, offset is 'offset_in_page' of
+ * (t_task_buf + mem_off) instead of 'mem_off'.
+ */
+ off_in_page = offset_in_page(page_addr);
+ page = virt_to_page(page_addr);
+ tlen = min(tlen, PAGE_SIZE - off_in_page);
+ } else
+ off_in_page = mem_off;
+ BUG_ON(!page);
+ get_page(page);
+ skb_fill_page_desc(fp_skb(fp),
+ skb_shinfo(fp_skb(fp))->nr_frags,
+ page, off_in_page, tlen);
+ fr_len(fp) += tlen;
+ fp_skb(fp)->data_len += tlen;
+ fp_skb(fp)->truesize +=
+ PAGE_SIZE << compound_order(page);
+ } else if (mem) {
+ BUG_ON(!page);
+ from = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
+ KM_SOFTIRQ0);
+ page_addr = from;
+ from += mem_off & ~PAGE_MASK;
+ tlen = min(tlen, (size_t)(PAGE_SIZE -
+ (mem_off & ~PAGE_MASK)));
+ memcpy(to, from, tlen);
+ kunmap_atomic(page_addr, KM_SOFTIRQ0);
+ to += tlen;
+ } else {
+ from = task->t_task_buf + mem_off;
+ memcpy(to, from, tlen);
+ to += tlen;
+ }
+
+ mem_off += tlen;
+ mem_len -= tlen;
+ frame_len -= tlen;
+ remaining -= tlen;
+
+ if (frame_len &&
+ (skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN))
+ continue;
+ if (!remaining)
+ f_ctl |= FC_FC_END_SEQ;
+ fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
+ FC_TYPE_FCP, f_ctl, fh_off);
+ error = lport->tt.seq_send(lport, cmd->seq, fp);
+ if (error) {
+ /* XXX For now, initiator will retry */
+ if (printk_ratelimit())
+ printk(KERN_ERR "%s: Failed to send frame %p, "
+ "xid <0x%x>, remaining <0x%x>, "
+ "lso_max <0x%x>\n",
+ __func__, fp, ep->xid,
+ remaining, lport->lso_max);
+ }
+ }
+ return ft_queue_status(se_cmd);
+}
+
+/*
+ * Receive write data frame.
+ */
+void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp)
+{
+ struct se_cmd *se_cmd = &cmd->se_cmd;
+ struct fc_seq *seq = cmd->seq;
+ struct fc_exch *ep;
+ struct fc_lport *lport;
+ struct se_transport_task *task;
+ struct fc_frame_header *fh;
+ struct se_mem *mem;
+ u32 mem_off;
+ u32 rel_off;
+ size_t frame_len;
+ size_t mem_len;
+ size_t tlen;
+ struct page *page;
+ void *page_addr;
+ void *from;
+ void *to;
+ u32 f_ctl;
+ void *buf;
+
+ task = T_TASK(se_cmd);
+ BUG_ON(!task);
+
+ fh = fc_frame_header_get(fp);
+ if (!(ntoh24(fh->fh_f_ctl) & FC_FC_REL_OFF))
+ goto drop;
+
+ /*
+ * Doesn't expect even single byte of payload. Payload
+ * is expected to be copied directly to user buffers
+ * due to DDP (Large Rx offload) feature, hence
+ * BUG_ON if BUF is non-NULL
+ */
+ buf = fc_frame_payload_get(fp, 1);
+ if (cmd->was_ddp_setup && buf) {
+ printk(KERN_INFO "%s: When DDP was setup, not expected to"
+ "receive frame with payload, Payload shall be"
+ "copied directly to buffer instead of coming "
+ "via. legacy receive queues\n", __func__);
+ BUG_ON(buf);
+ }
+
+ /*
+ * If ft_cmd indicated 'ddp_setup', in that case only the last frame
+ * should come with 'TSI bit being set'. If 'TSI bit is not set and if
+ * data frame appears here, means error condition. In both the cases
+ * release the DDP context (ddp_put) and in error case, as well
+ * initiate error recovery mechanism.
+ */
+ ep = fc_seq_exch(seq);
+ if (cmd->was_ddp_setup) {
+ BUG_ON(!ep);
+ lport = ep->lp;
+ BUG_ON(!lport);
+ }
+ if (cmd->was_ddp_setup && ep->xid != FC_XID_UNKNOWN) {
+ f_ctl = ntoh24(fh->fh_f_ctl);
+ /*
+ * If TSI bit set in f_ctl, means last write data frame is
+ * received successfully where payload is posted directly
+ * to user buffer and only the last frame's header is posted
+ * in legacy receive queue
+ */
+ if (f_ctl & FC_FC_SEQ_INIT) { /* TSI bit set in FC frame */
+ cmd->write_data_len = lport->tt.ddp_done(lport,
+ ep->xid);
+ goto last_frame;
+ } else {
+ /*
+ * Updating the write_data_len may be meaningless at
+ * this point, but just in case if required in future
+ * for debugging or any other purpose
+ */
+ printk(KERN_ERR "%s: Received frame with TSI bit not"
+ " being SET, dropping the frame, "
+ "cmd->sg <%p>, cmd->sg_cnt <0x%x>\n",
+ __func__, cmd->sg, cmd->sg_cnt);
+ cmd->write_data_len = lport->tt.ddp_done(lport,
+ ep->xid);
+ lport->tt.seq_exch_abort(cmd->seq, 0);
+ goto drop;
+ }
+ }
+
+ rel_off = ntohl(fh->fh_parm_offset);
+ frame_len = fr_len(fp);
+ if (frame_len <= sizeof(*fh))
+ goto drop;
+ frame_len -= sizeof(*fh);
+ from = fc_frame_payload_get(fp, 0);
+ if (rel_off >= se_cmd->data_length)
+ goto drop;
+ if (frame_len + rel_off > se_cmd->data_length)
+ frame_len = se_cmd->data_length - rel_off;
+
+ /*
+ * Setup to use first mem list entry if any.
+ */
+ if (task->t_tasks_se_num) {
+ mem = list_first_entry(task->t_mem_list,
+ struct se_mem, se_list);
+ mem_len = mem->se_len;
+ mem_off = mem->se_off;
+ page = mem->se_page;
+ } else {
+ mem = NULL;
+ page = NULL;
+ mem_off = 0;
+ mem_len = frame_len;
+ }
+
+ while (frame_len) {
+ if (!mem_len) {
+ BUG_ON(!mem);
+ mem = list_entry(mem->se_list.next,
+ struct se_mem, se_list);
+ mem_len = mem->se_len;
+ mem_off = mem->se_off;
+ page = mem->se_page;
+ }
+ if (rel_off >= mem_len) {
+ rel_off -= mem_len;
+ mem_len = 0;
+ continue;
+ }
+ mem_off += rel_off;
+ mem_len -= rel_off;
+ rel_off = 0;
+
+ tlen = min(mem_len, frame_len);
+
+ if (mem) {
+ to = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
+ KM_SOFTIRQ0);
+ page_addr = to;
+ to += mem_off & ~PAGE_MASK;
+ tlen = min(tlen, (size_t)(PAGE_SIZE -
+ (mem_off & ~PAGE_MASK)));
+ memcpy(to, from, tlen);
+ kunmap_atomic(page_addr, KM_SOFTIRQ0);
+ } else {
+ to = task->t_task_buf + mem_off;
+ memcpy(to, from, tlen);
+ }
+ from += tlen;
+ frame_len -= tlen;
+ mem_off += tlen;
+ mem_len -= tlen;
+ cmd->write_data_len += tlen;
+ }
+last_frame:
+ if (cmd->write_data_len == se_cmd->data_length)
+ transport_generic_handle_data(se_cmd);
+drop:
+ fc_frame_free(fp);
+}
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
new file mode 100644
index 0000000..a3bd57f
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -0,0 +1,541 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* XXX TBD some includes may be extraneous */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/hash.h>
+#include <linux/rcupdate.h>
+#include <linux/rculist.h>
+#include <linux/kref.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/configfs_macros.h>
+
+#include <scsi/libfc.h>
+#include "tcm_fc.h"
+
+static void ft_sess_delete_all(struct ft_tport *);
+
+/*
+ * Lookup or allocate target local port.
+ * Caller holds ft_lport_lock.
+ */
+static struct ft_tport *ft_tport_create(struct fc_lport *lport)
+{
+ struct ft_tpg *tpg;
+ struct ft_tport *tport;
+ int i;
+
+ tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+ if (tport && tport->tpg)
+ return tport;
+
+ tpg = ft_lport_find_tpg(lport);
+ if (!tpg)
+ return NULL;
+
+ if (tport) {
+ tport->tpg = tpg;
+ return tport;
+ }
+
+ tport = kzalloc(sizeof(*tport), GFP_KERNEL);
+ if (!tport)
+ return NULL;
+
+ tport->lport = lport;
+ tport->tpg = tpg;
+ tpg->tport = tport;
+ for (i = 0; i < FT_SESS_HASH_SIZE; i++)
+ INIT_HLIST_HEAD(&tport->hash[i]);
+
+ rcu_assign_pointer(lport->prov[FC_TYPE_FCP], tport);
+ return tport;
+}
+
+/*
+ * Free tport via RCU.
+ */
+static void ft_tport_rcu_free(struct rcu_head *rcu)
+{
+ struct ft_tport *tport = container_of(rcu, struct ft_tport, rcu);
+
+ kfree(tport);
+}
+
+/*
+ * Delete a target local port.
+ * Caller holds ft_lport_lock.
+ */
+static void ft_tport_delete(struct ft_tport *tport)
+{
+ struct fc_lport *lport;
+ struct ft_tpg *tpg;
+
+ ft_sess_delete_all(tport);
+ lport = tport->lport;
+ BUG_ON(tport != lport->prov[FC_TYPE_FCP]);
+ rcu_assign_pointer(lport->prov[FC_TYPE_FCP], NULL);
+
+ tpg = tport->tpg;
+ if (tpg) {
+ tpg->tport = NULL;
+ tport->tpg = NULL;
+ }
+ call_rcu(&tport->rcu, ft_tport_rcu_free);
+}
+
+/*
+ * Add local port.
+ * Called thru fc_lport_iterate().
+ */
+void ft_lport_add(struct fc_lport *lport, void *arg)
+{
+ mutex_lock(&ft_lport_lock);
+ ft_tport_create(lport);
+ mutex_unlock(&ft_lport_lock);
+}
+
+/*
+ * Delete local port.
+ * Called thru fc_lport_iterate().
+ */
+void ft_lport_del(struct fc_lport *lport, void *arg)
+{
+ struct ft_tport *tport;
+
+ mutex_lock(&ft_lport_lock);
+ tport = lport->prov[FC_TYPE_FCP];
+ if (tport)
+ ft_tport_delete(tport);
+ mutex_unlock(&ft_lport_lock);
+}
+
+/*
+ * Notification of local port change from libfc.
+ * Create or delete local port and associated tport.
+ */
+int ft_lport_notify(struct notifier_block *nb, unsigned long event, void *arg)
+{
+ struct fc_lport *lport = arg;
+
+ switch (event) {
+ case FC_LPORT_EV_ADD:
+ ft_lport_add(lport, NULL);
+ break;
+ case FC_LPORT_EV_DEL:
+ ft_lport_del(lport, NULL);
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+/*
+ * Hash function for FC_IDs.
+ */
+static u32 ft_sess_hash(u32 port_id)
+{
+ return hash_32(port_id, FT_SESS_HASH_BITS);
+}
+
+/*
+ * Find session in local port.
+ * Sessions and hash lists are RCU-protected.
+ * A reference is taken which must be eventually freed.
+ */
+static struct ft_sess *ft_sess_get(struct fc_lport *lport, u32 port_id)
+{
+ struct ft_tport *tport;
+ struct hlist_head *head;
+ struct hlist_node *pos;
+ struct ft_sess *sess;
+
+ rcu_read_lock();
+ tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+ if (!tport)
+ goto out;
+
+ head = &tport->hash[ft_sess_hash(port_id)];
+ hlist_for_each_entry_rcu(sess, pos, head, hash) {
+ if (sess->port_id == port_id) {
+ kref_get(&sess->kref);
+ rcu_read_unlock();
+ FT_SESS_DBG("port_id %x found %p\n", port_id, sess);
+ return sess;
+ }
+ }
+out:
+ rcu_read_unlock();
+ FT_SESS_DBG("port_id %x not found\n", port_id);
+ return NULL;
+}
+
+/*
+ * Allocate session and enter it in the hash for the local port.
+ * Caller holds ft_lport_lock.
+ */
+static struct ft_sess *ft_sess_create(struct ft_tport *tport, u32 port_id,
+ struct ft_node_acl *acl)
+{
+ struct ft_sess *sess;
+ struct hlist_head *head;
+ struct hlist_node *pos;
+
+ head = &tport->hash[ft_sess_hash(port_id)];
+ hlist_for_each_entry_rcu(sess, pos, head, hash)
+ if (sess->port_id == port_id)
+ return sess;
+
+ sess = kzalloc(sizeof(*sess), GFP_KERNEL);
+ if (!sess)
+ return NULL;
+
+ sess->se_sess = transport_init_session();
+ if (!sess->se_sess) {
+ kfree(sess);
+ return NULL;
+ }
+ sess->se_sess->se_node_acl = &acl->se_node_acl;
+ sess->tport = tport;
+ sess->port_id = port_id;
+ kref_init(&sess->kref); /* ref for table entry */
+ hlist_add_head_rcu(&sess->hash, head);
+ tport->sess_count++;
+
+ FT_SESS_DBG("port_id %x sess %p\n", port_id, sess);
+
+ transport_register_session(&tport->tpg->se_tpg, &acl->se_node_acl,
+ sess->se_sess, sess);
+ return sess;
+}
+
+/*
+ * Unhash the session.
+ * Caller holds ft_lport_lock.
+ */
+static void ft_sess_unhash(struct ft_sess *sess)
+{
+ struct ft_tport *tport = sess->tport;
+
+ hlist_del_rcu(&sess->hash);
+ BUG_ON(!tport->sess_count);
+ tport->sess_count--;
+ sess->port_id = -1;
+ sess->params = 0;
+}
+
+/*
+ * Delete session from hash.
+ * Caller holds ft_lport_lock.
+ */
+static struct ft_sess *ft_sess_delete(struct ft_tport *tport, u32 port_id)
+{
+ struct hlist_head *head;
+ struct hlist_node *pos;
+ struct ft_sess *sess;
+
+ head = &tport->hash[ft_sess_hash(port_id)];
+ hlist_for_each_entry_rcu(sess, pos, head, hash) {
+ if (sess->port_id == port_id) {
+ ft_sess_unhash(sess);
+ return sess;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * Delete all sessions from tport.
+ * Caller holds ft_lport_lock.
+ */
+static void ft_sess_delete_all(struct ft_tport *tport)
+{
+ struct hlist_head *head;
+ struct hlist_node *pos;
+ struct ft_sess *sess;
+
+ for (head = tport->hash;
+ head < &tport->hash[FT_SESS_HASH_SIZE]; head++) {
+ hlist_for_each_entry_rcu(sess, pos, head, hash) {
+ ft_sess_unhash(sess);
+ transport_deregister_session_configfs(sess->se_sess);
+ ft_sess_put(sess); /* release from table */
+ }
+ }
+}
+
+/*
+ * TCM ops for sessions.
+ */
+
+/*
+ * Determine whether session is allowed to be shutdown in the current context.
+ * Returns non-zero if the session should be shutdown.
+ */
+int ft_sess_shutdown(struct se_session *se_sess)
+{
+ struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+ FT_SESS_DBG("port_id %x\n", sess->port_id);
+ return 1;
+}
+
+/*
+ * Remove session and send PRLO.
+ * This is called when the ACL is being deleted or queue depth is changing.
+ */
+void ft_sess_close(struct se_session *se_sess)
+{
+ struct ft_sess *sess = se_sess->fabric_sess_ptr;
+ struct fc_lport *lport;
+ u32 port_id;
+
+ mutex_lock(&ft_lport_lock);
+ lport = sess->tport->lport;
+ port_id = sess->port_id;
+ if (port_id == -1) {
+ mutex_lock(&ft_lport_lock);
+ return;
+ }
+ FT_SESS_DBG("port_id %x\n", port_id);
+ ft_sess_unhash(sess);
+ mutex_unlock(&ft_lport_lock);
+ transport_deregister_session_configfs(se_sess);
+ ft_sess_put(sess);
+ /* XXX Send LOGO or PRLO */
+ synchronize_rcu(); /* let transport deregister happen */
+}
+
+void ft_sess_stop(struct se_session *se_sess, int sess_sleep, int conn_sleep)
+{
+ struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+ FT_SESS_DBG("port_id %x\n", sess->port_id);
+}
+
+int ft_sess_logged_in(struct se_session *se_sess)
+{
+ struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+ return sess->port_id != -1;
+}
+
+u32 ft_sess_get_index(struct se_session *se_sess)
+{
+ struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+ return sess->port_id; /* XXX TBD probably not what is needed */
+}
+
+u32 ft_sess_get_port_name(struct se_session *se_sess,
+ unsigned char *buf, u32 len)
+{
+ struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+ return ft_format_wwn(buf, len, sess->port_name);
+}
+
+void ft_sess_set_erl0(struct se_session *se_sess)
+{
+ /* XXX TBD called when out of memory */
+}
+
+/*
+ * libfc ops involving sessions.
+ */
+
+static int ft_prli_locked(struct fc_rport_priv *rdata, u32 spp_len,
+ const struct fc_els_spp *rspp, struct fc_els_spp *spp)
+{
+ struct ft_tport *tport;
+ struct ft_sess *sess;
+ struct ft_node_acl *acl;
+ u32 fcp_parm;
+
+ tport = ft_tport_create(rdata->local_port);
+ if (!tport)
+ return 0; /* not a target for this local port */
+
+ acl = ft_acl_get(tport->tpg, rdata);
+ if (!acl)
+ return 0;
+
+ if (!rspp)
+ goto fill;
+
+ if (rspp->spp_flags & (FC_SPP_OPA_VAL | FC_SPP_RPA_VAL))
+ return FC_SPP_RESP_NO_PA;
+
+ /*
+ * If both target and initiator bits are off, the SPP is invalid.
+ */
+ fcp_parm = ntohl(rspp->spp_params);
+ if (!(fcp_parm & (FCP_SPPF_INIT_FCN | FCP_SPPF_TARG_FCN)))
+ return FC_SPP_RESP_INVL;
+
+ /*
+ * Create session (image pair) only if requested by
+ * EST_IMG_PAIR flag and if the requestor is an initiator.
+ */
+ if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR) {
+ spp->spp_flags |= FC_SPP_EST_IMG_PAIR;
+ if (!(fcp_parm & FCP_SPPF_INIT_FCN))
+ return FC_SPP_RESP_CONF;
+ sess = ft_sess_create(tport, rdata->ids.port_id, acl);
+ if (!sess)
+ return FC_SPP_RESP_RES;
+ if (!sess->params)
+ rdata->prli_count++;
+ sess->params = fcp_parm;
+ sess->port_name = rdata->ids.port_name;
+ sess->max_frame = rdata->maxframe_size;
+
+ /* XXX TBD - clearing actions. unit attn, see 4.10 */
+ }
+
+ /*
+ * OR in our service parameters with other provider (initiator), if any.
+ * TBD XXX - indicate RETRY capability?
+ */
+fill:
+ fcp_parm = ntohl(spp->spp_params);
+ spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN);
+ return FC_SPP_RESP_ACK;
+}
+
+/**
+ * tcm_fcp_prli() - Handle incoming or outgoing PRLI for the FCP target
+ * @rdata: remote port private
+ * @spp_len: service parameter page length
+ * @rspp: received service parameter page (NULL for outgoing PRLI)
+ * @spp: response service parameter page
+ *
+ * Returns spp response code.
+ */
+static int ft_prli(struct fc_rport_priv *rdata, u32 spp_len,
+ const struct fc_els_spp *rspp, struct fc_els_spp *spp)
+{
+ int ret;
+
+ mutex_lock(&ft_lport_lock);
+ ret = ft_prli_locked(rdata, spp_len, rspp, spp);
+ mutex_unlock(&ft_lport_lock);
+ FT_SESS_DBG("port_id %x flags %x ret %x\n",
+ rdata->ids.port_id, rspp ? rspp->spp_flags : 0, ret);
+ return ret;
+}
+
+static void ft_sess_rcu_free(struct rcu_head *rcu)
+{
+ struct ft_sess *sess = container_of(rcu, struct ft_sess, rcu);
+
+ transport_deregister_session(sess->se_sess);
+ kfree(sess);
+}
+
+static void ft_sess_free(struct kref *kref)
+{
+ struct ft_sess *sess = container_of(kref, struct ft_sess, kref);
+
+ call_rcu(&sess->rcu, ft_sess_rcu_free);
+}
+
+void ft_sess_put(struct ft_sess *sess)
+{
+ int sess_held = atomic_read(&sess->kref.refcount);
+
+ BUG_ON(!sess_held);
+ kref_put(&sess->kref, ft_sess_free);
+}
+
+static void ft_prlo(struct fc_rport_priv *rdata)
+{
+ struct ft_sess *sess;
+ struct ft_tport *tport;
+
+ mutex_lock(&ft_lport_lock);
+ tport = rcu_dereference(rdata->local_port->prov[FC_TYPE_FCP]);
+ if (!tport) {
+ mutex_unlock(&ft_lport_lock);
+ return;
+ }
+ sess = ft_sess_delete(tport, rdata->ids.port_id);
+ if (!sess) {
+ mutex_unlock(&ft_lport_lock);
+ return;
+ }
+ mutex_unlock(&ft_lport_lock);
+ transport_deregister_session_configfs(sess->se_sess);
+ ft_sess_put(sess); /* release from table */
+ rdata->prli_count--;
+ /* XXX TBD - clearing actions. unit attn, see 4.10 */
+}
+
+/*
+ * Handle incoming FCP request.
+ * Caller has verified that the frame is type FCP.
+ */
+static void ft_recv(struct fc_lport *lport, struct fc_frame *fp)
+{
+ struct ft_sess *sess;
+ u32 sid = fc_frame_sid(fp);
+
+ FT_SESS_DBG("sid %x\n", sid);
+
+ sess = ft_sess_get(lport, sid);
+ if (!sess) {
+ FT_SESS_DBG("sid %x sess lookup failed\n", sid);
+ /* TBD XXX - if FCP_CMND, send PRLO */
+ fc_frame_free(fp);
+ return;
+ }
+ ft_recv_req(sess, fp); /* must do ft_sess_put() */
+}
+
+/*
+ * Provider ops for libfc.
+ */
+struct fc4_prov ft_prov = {
+ .prli = ft_prli,
+ .prlo = ft_prlo,
+ .recv = ft_recv,
+ .module = THIS_MODULE,
+};
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 80484af..b1f0f83 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1391,6 +1391,14 @@
help
Support for Console on the NWP serial ports.
+config SERIAL_LANTIQ
+ bool "Lantiq serial driver"
+ depends on LANTIQ
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for console and UART on Lantiq SoCs.
+
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index fee0690..3527604 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,4 @@
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
+obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
new file mode 100644
index 0000000..58cf279e
--- /dev/null
+++ b/drivers/tty/serial/lantiq.c
@@ -0,0 +1,756 @@
+/*
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <lantiq_soc.h>
+
+#define PORT_LTQ_ASC 111
+#define MAXPORTS 2
+#define UART_DUMMY_UER_RX 1
+#define DRVNAME "ltq_asc"
+#ifdef __BIG_ENDIAN
+#define LTQ_ASC_TBUF (0x0020 + 3)
+#define LTQ_ASC_RBUF (0x0024 + 3)
+#else
+#define LTQ_ASC_TBUF 0x0020
+#define LTQ_ASC_RBUF 0x0024
+#endif
+#define LTQ_ASC_FSTAT 0x0048
+#define LTQ_ASC_WHBSTATE 0x0018
+#define LTQ_ASC_STATE 0x0014
+#define LTQ_ASC_IRNCR 0x00F8
+#define LTQ_ASC_CLC 0x0000
+#define LTQ_ASC_ID 0x0008
+#define LTQ_ASC_PISEL 0x0004
+#define LTQ_ASC_TXFCON 0x0044
+#define LTQ_ASC_RXFCON 0x0040
+#define LTQ_ASC_CON 0x0010
+#define LTQ_ASC_BG 0x0050
+#define LTQ_ASC_IRNREN 0x00F4
+
+#define ASC_IRNREN_TX 0x1
+#define ASC_IRNREN_RX 0x2
+#define ASC_IRNREN_ERR 0x4
+#define ASC_IRNREN_TX_BUF 0x8
+#define ASC_IRNCR_TIR 0x1
+#define ASC_IRNCR_RIR 0x2
+#define ASC_IRNCR_EIR 0x4
+
+#define ASCOPT_CSIZE 0x3
+#define TXFIFO_FL 1
+#define RXFIFO_FL 1
+#define ASCCLC_DISS 0x2
+#define ASCCLC_RMCMASK 0x0000FF00
+#define ASCCLC_RMCOFFSET 8
+#define ASCCON_M_8ASYNC 0x0
+#define ASCCON_M_7ASYNC 0x2
+#define ASCCON_ODD 0x00000020
+#define ASCCON_STP 0x00000080
+#define ASCCON_BRS 0x00000100
+#define ASCCON_FDE 0x00000200
+#define ASCCON_R 0x00008000
+#define ASCCON_FEN 0x00020000
+#define ASCCON_ROEN 0x00080000
+#define ASCCON_TOEN 0x00100000
+#define ASCSTATE_PE 0x00010000
+#define ASCSTATE_FE 0x00020000
+#define ASCSTATE_ROE 0x00080000
+#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+#define ASCWHBSTATE_CLRREN 0x00000001
+#define ASCWHBSTATE_SETREN 0x00000002
+#define ASCWHBSTATE_CLRPE 0x00000004
+#define ASCWHBSTATE_CLRFE 0x00000008
+#define ASCWHBSTATE_CLRROE 0x00000020
+#define ASCTXFCON_TXFEN 0x0001
+#define ASCTXFCON_TXFFLU 0x0002
+#define ASCTXFCON_TXFITLMASK 0x3F00
+#define ASCTXFCON_TXFITLOFF 8
+#define ASCRXFCON_RXFEN 0x0001
+#define ASCRXFCON_RXFFLU 0x0002
+#define ASCRXFCON_RXFITLMASK 0x3F00
+#define ASCRXFCON_RXFITLOFF 8
+#define ASCFSTAT_RXFFLMASK 0x003F
+#define ASCFSTAT_TXFFLMASK 0x3F00
+#define ASCFSTAT_TXFREEMASK 0x3F000000
+#define ASCFSTAT_TXFREEOFF 24
+
+static void lqasc_tx_chars(struct uart_port *port);
+static struct ltq_uart_port *lqasc_port[MAXPORTS];
+static struct uart_driver lqasc_reg;
+static DEFINE_SPINLOCK(ltq_asc_lock);
+
+struct ltq_uart_port {
+ struct uart_port port;
+ struct clk *clk;
+ unsigned int tx_irq;
+ unsigned int rx_irq;
+ unsigned int err_irq;
+};
+
+static inline struct
+ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
+{
+ return container_of(port, struct ltq_uart_port, port);
+}
+
+static void
+lqasc_stop_tx(struct uart_port *port)
+{
+ return;
+}
+
+static void
+lqasc_start_tx(struct uart_port *port)
+{
+ unsigned long flags;
+ spin_lock_irqsave(<q_asc_lock, flags);
+ lqasc_tx_chars(port);
+ spin_unlock_irqrestore(<q_asc_lock, flags);
+ return;
+}
+
+static void
+lqasc_stop_rx(struct uart_port *port)
+{
+ ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
+}
+
+static void
+lqasc_enable_ms(struct uart_port *port)
+{
+}
+
+static int
+lqasc_rx_chars(struct uart_port *port)
+{
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+ unsigned int ch = 0, rsr = 0, fifocnt;
+
+ if (!tty) {
+ dev_dbg(port->dev, "%s:tty is busy now", __func__);
+ return -EBUSY;
+ }
+ fifocnt =
+ ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+ while (fifocnt--) {
+ u8 flag = TTY_NORMAL;
+ ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
+ rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
+ & ASCSTATE_ANY) | UART_DUMMY_UER_RX;
+ tty_flip_buffer_push(tty);
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rsr & ASCSTATE_ANY) {
+ if (rsr & ASCSTATE_PE) {
+ port->icount.parity++;
+ ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
+ port->membase + LTQ_ASC_WHBSTATE);
+ } else if (rsr & ASCSTATE_FE) {
+ port->icount.frame++;
+ ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
+ port->membase + LTQ_ASC_WHBSTATE);
+ }
+ if (rsr & ASCSTATE_ROE) {
+ port->icount.overrun++;
+ ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
+ port->membase + LTQ_ASC_WHBSTATE);
+ }
+
+ rsr &= port->read_status_mask;
+
+ if (rsr & ASCSTATE_PE)
+ flag = TTY_PARITY;
+ else if (rsr & ASCSTATE_FE)
+ flag = TTY_FRAME;
+ }
+
+ if ((rsr & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (rsr & ASCSTATE_ROE)
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ if (ch != 0)
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+ return 0;
+}
+
+static void
+lqasc_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ if (uart_tx_stopped(port)) {
+ lqasc_stop_tx(port);
+ return;
+ }
+
+ while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
+ ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
+ if (port->x_char) {
+ ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
+ port->icount.tx++;
+ port->x_char = 0;
+ continue;
+ }
+
+ if (uart_circ_empty(xmit))
+ break;
+
+ ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
+ port->membase + LTQ_ASC_TBUF);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t
+lqasc_tx_int(int irq, void *_port)
+{
+ unsigned long flags;
+ struct uart_port *port = (struct uart_port *)_port;
+ spin_lock_irqsave(<q_asc_lock, flags);
+ ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
+ spin_unlock_irqrestore(<q_asc_lock, flags);
+ lqasc_start_tx(port);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_err_int(int irq, void *_port)
+{
+ unsigned long flags;
+ struct uart_port *port = (struct uart_port *)_port;
+ spin_lock_irqsave(<q_asc_lock, flags);
+ /* clear any pending interrupts */
+ ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
+ ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
+ spin_unlock_irqrestore(<q_asc_lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_rx_int(int irq, void *_port)
+{
+ unsigned long flags;
+ struct uart_port *port = (struct uart_port *)_port;
+ spin_lock_irqsave(<q_asc_lock, flags);
+ ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
+ lqasc_rx_chars(port);
+ spin_unlock_irqrestore(<q_asc_lock, flags);
+ return IRQ_HANDLED;
+}
+
+static unsigned int
+lqasc_tx_empty(struct uart_port *port)
+{
+ int status;
+ status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+ return status ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int
+lqasc_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void
+lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+}
+
+static void
+lqasc_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int
+lqasc_startup(struct uart_port *port)
+{
+ struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+ int retval;
+
+ port->uartclk = clk_get_rate(ltq_port->clk);
+
+ ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+ port->membase + LTQ_ASC_CLC);
+
+ ltq_w32(0, port->membase + LTQ_ASC_PISEL);
+ ltq_w32(
+ ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
+ ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
+ port->membase + LTQ_ASC_TXFCON);
+ ltq_w32(
+ ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
+ | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
+ port->membase + LTQ_ASC_RXFCON);
+ /* make sure other settings are written to hardware before
+ * setting enable bits
+ */
+ wmb();
+ ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
+ ASCCON_ROEN, port->membase + LTQ_ASC_CON);
+
+ retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
+ IRQF_DISABLED, "asc_tx", port);
+ if (retval) {
+ pr_err("failed to request lqasc_tx_int\n");
+ return retval;
+ }
+
+ retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
+ IRQF_DISABLED, "asc_rx", port);
+ if (retval) {
+ pr_err("failed to request lqasc_rx_int\n");
+ goto err1;
+ }
+
+ retval = request_irq(ltq_port->err_irq, lqasc_err_int,
+ IRQF_DISABLED, "asc_err", port);
+ if (retval) {
+ pr_err("failed to request lqasc_err_int\n");
+ goto err2;
+ }
+
+ ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+ port->membase + LTQ_ASC_IRNREN);
+ return 0;
+
+err2:
+ free_irq(ltq_port->rx_irq, port);
+err1:
+ free_irq(ltq_port->tx_irq, port);
+ return retval;
+}
+
+static void
+lqasc_shutdown(struct uart_port *port)
+{
+ struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+ free_irq(ltq_port->tx_irq, port);
+ free_irq(ltq_port->rx_irq, port);
+ free_irq(ltq_port->err_irq, port);
+
+ ltq_w32(0, port->membase + LTQ_ASC_CON);
+ ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
+ port->membase + LTQ_ASC_RXFCON);
+ ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+ port->membase + LTQ_ASC_TXFCON);
+}
+
+static void
+lqasc_set_termios(struct uart_port *port,
+ struct ktermios *new, struct ktermios *old)
+{
+ unsigned int cflag;
+ unsigned int iflag;
+ unsigned int divisor;
+ unsigned int baud;
+ unsigned int con = 0;
+ unsigned long flags;
+
+ cflag = new->c_cflag;
+ iflag = new->c_iflag;
+
+ switch (cflag & CSIZE) {
+ case CS7:
+ con = ASCCON_M_7ASYNC;
+ break;
+
+ case CS5:
+ case CS6:
+ default:
+ new->c_cflag &= ~ CSIZE;
+ new->c_cflag |= CS8;
+ con = ASCCON_M_8ASYNC;
+ break;
+ }
+
+ cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+ if (cflag & CSTOPB)
+ con |= ASCCON_STP;
+
+ if (cflag & PARENB) {
+ if (!(cflag & PARODD))
+ con &= ~ASCCON_ODD;
+ else
+ con |= ASCCON_ODD;
+ }
+
+ port->read_status_mask = ASCSTATE_ROE;
+ if (iflag & INPCK)
+ port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+ port->ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+ if (iflag & IGNBRK) {
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCSTATE_ROE;
+ }
+
+ if ((cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+ /* set error signals - framing, parity and overrun, enable receiver */
+ con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
+
+ spin_lock_irqsave(<q_asc_lock, flags);
+
+ /* set up CON */
+ ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
+
+ /* Set baud rate - take a divider of 2 into account */
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ divisor = uart_get_divisor(port, baud);
+ divisor = divisor / 2 - 1;
+
+ /* disable the baudrate generator */
+ ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
+
+ /* make sure the fractional divider is off */
+ ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
+
+ /* set up to use divisor of 2 */
+ ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
+
+ /* now we can write the new baudrate into the register */
+ ltq_w32(divisor, port->membase + LTQ_ASC_BG);
+
+ /* turn the baudrate generator back on */
+ ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
+
+ /* enable rx */
+ ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
+
+ spin_unlock_irqrestore(<q_asc_lock, flags);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(new))
+ tty_termios_encode_baud_rate(new, baud, baud);
+}
+
+static const char*
+lqasc_type(struct uart_port *port)
+{
+ if (port->type == PORT_LTQ_ASC)
+ return DRVNAME;
+ else
+ return NULL;
+}
+
+static void
+lqasc_release_port(struct uart_port *port)
+{
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+}
+
+static int
+lqasc_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *res;
+ int size;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot obtain I/O memory region");
+ return -ENODEV;
+ }
+ size = resource_size(res);
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ size, dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "cannot request I/O memory region");
+ return -EBUSY;
+ }
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = devm_ioremap_nocache(&pdev->dev,
+ port->mapbase, size);
+ if (port->membase == NULL)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+lqasc_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_LTQ_ASC;
+ lqasc_request_port(port);
+ }
+}
+
+static int
+lqasc_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops lqasc_pops = {
+ .tx_empty = lqasc_tx_empty,
+ .set_mctrl = lqasc_set_mctrl,
+ .get_mctrl = lqasc_get_mctrl,
+ .stop_tx = lqasc_stop_tx,
+ .start_tx = lqasc_start_tx,
+ .stop_rx = lqasc_stop_rx,
+ .enable_ms = lqasc_enable_ms,
+ .break_ctl = lqasc_break_ctl,
+ .startup = lqasc_startup,
+ .shutdown = lqasc_shutdown,
+ .set_termios = lqasc_set_termios,
+ .type = lqasc_type,
+ .release_port = lqasc_release_port,
+ .request_port = lqasc_request_port,
+ .config_port = lqasc_config_port,
+ .verify_port = lqasc_verify_port,
+};
+
+static void
+lqasc_console_putchar(struct uart_port *port, int ch)
+{
+ int fifofree;
+
+ if (!port->membase)
+ return;
+
+ do {
+ fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
+ & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
+ } while (fifofree == 0);
+ ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
+}
+
+
+static void
+lqasc_console_write(struct console *co, const char *s, u_int count)
+{
+ struct ltq_uart_port *ltq_port;
+ struct uart_port *port;
+ unsigned long flags;
+
+ if (co->index >= MAXPORTS)
+ return;
+
+ ltq_port = lqasc_port[co->index];
+ if (!ltq_port)
+ return;
+
+ port = <q_port->port;
+
+ spin_lock_irqsave(<q_asc_lock, flags);
+ uart_console_write(port, s, count, lqasc_console_putchar);
+ spin_unlock_irqrestore(<q_asc_lock, flags);
+}
+
+static int __init
+lqasc_console_setup(struct console *co, char *options)
+{
+ struct ltq_uart_port *ltq_port;
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= MAXPORTS)
+ return -ENODEV;
+
+ ltq_port = lqasc_port[co->index];
+ if (!ltq_port)
+ return -ENODEV;
+
+ port = <q_port->port;
+
+ port->uartclk = clk_get_rate(ltq_port->clk);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console lqasc_console = {
+ .name = "ttyLTQ",
+ .write = lqasc_console_write,
+ .device = uart_console_device,
+ .setup = lqasc_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &lqasc_reg,
+};
+
+static int __init
+lqasc_console_init(void)
+{
+ register_console(&lqasc_console);
+ return 0;
+}
+console_initcall(lqasc_console_init);
+
+static struct uart_driver lqasc_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = DRVNAME,
+ .dev_name = "ttyLTQ",
+ .major = 0,
+ .minor = 0,
+ .nr = MAXPORTS,
+ .cons = &lqasc_console,
+};
+
+static int __init
+lqasc_probe(struct platform_device *pdev)
+{
+ struct ltq_uart_port *ltq_port;
+ struct uart_port *port;
+ struct resource *mmres, *irqres;
+ int tx_irq, rx_irq, err_irq;
+ struct clk *clk;
+ int ret;
+
+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!mmres || !irqres)
+ return -ENODEV;
+
+ if (pdev->id >= MAXPORTS)
+ return -EBUSY;
+
+ if (lqasc_port[pdev->id] != NULL)
+ return -EBUSY;
+
+ clk = clk_get(&pdev->dev, "fpi");
+ if (IS_ERR(clk)) {
+ pr_err("failed to get fpi clk\n");
+ return -ENOENT;
+ }
+
+ tx_irq = platform_get_irq_byname(pdev, "tx");
+ rx_irq = platform_get_irq_byname(pdev, "rx");
+ err_irq = platform_get_irq_byname(pdev, "err");
+ if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
+ return -ENODEV;
+
+ ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+ if (!ltq_port)
+ return -ENOMEM;
+
+ port = <q_port->port;
+
+ port->iotype = SERIAL_IO_MEM;
+ port->flags = ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
+ port->ops = &lqasc_pops;
+ port->fifosize = 16;
+ port->type = PORT_LTQ_ASC,
+ port->line = pdev->id;
+ port->dev = &pdev->dev;
+
+ port->irq = tx_irq; /* unused, just to be backward-compatibe */
+ port->mapbase = mmres->start;
+
+ ltq_port->clk = clk;
+
+ ltq_port->tx_irq = tx_irq;
+ ltq_port->rx_irq = rx_irq;
+ ltq_port->err_irq = err_irq;
+
+ lqasc_port[pdev->id] = ltq_port;
+ platform_set_drvdata(pdev, ltq_port);
+
+ ret = uart_add_one_port(&lqasc_reg, port);
+
+ return ret;
+}
+
+static struct platform_driver lqasc_driver = {
+ .driver = {
+ .name = DRVNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init
+init_lqasc(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&lqasc_reg);
+ if (ret != 0)
+ return ret;
+
+ ret = platform_driver_probe(&lqasc_driver, lqasc_probe);
+ if (ret != 0)
+ uart_unregister_driver(&lqasc_reg);
+
+ return ret;
+}
+
+module_init(init_lqasc);
+
+MODULE_DESCRIPTION("Lantiq serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 0e8eec5..c911b24 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -80,14 +80,17 @@
/*
* Try to register a serial port
*/
+static struct of_device_id of_platform_serial_table[];
static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct of_serial_info *info;
struct uart_port port;
int port_type;
int ret;
- if (!ofdev->dev.of_match)
+ match = of_match_device(of_platform_serial_table, &ofdev->dev);
+ if (!match)
return -EINVAL;
if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
@@ -97,7 +100,7 @@
if (info == NULL)
return -ENOMEM;
- port_type = (unsigned long)ofdev->dev.of_match->data;
+ port_type = (unsigned long)match->data;
ret = of_platform_serial_setup(ofdev, port_type, &port);
if (ret)
goto out;
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 51fe179..d2efe82 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -381,7 +381,13 @@
retval = -ENOMEM;
goto exit;
}
- idev->minor = id & MAX_ID_MASK;
+ if (id < UIO_MAX_DEVICES) {
+ idev->minor = id;
+ } else {
+ dev_err(idev->dev, "too many uio devices\n");
+ retval = -EINVAL;
+ idr_remove(&uio_idr, id);
+ }
exit:
mutex_unlock(&minor_lock);
return retval;
@@ -587,14 +593,12 @@
static int uio_find_mem_index(struct vm_area_struct *vma)
{
- int mi;
struct uio_device *idev = vma->vm_private_data;
- for (mi = 0; mi < MAX_UIO_MAPS; mi++) {
- if (idev->info->mem[mi].size == 0)
+ if (vma->vm_pgoff < MAX_UIO_MAPS) {
+ if (idev->info->mem[vma->vm_pgoff].size == 0)
return -1;
- if (vma->vm_pgoff == mi)
- return mi;
+ return (int)vma->vm_pgoff;
}
return -1;
}
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 5ffdb48..a879fd5 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -18,6 +18,9 @@
#define PCI_VENDOR_ID_HILSCHER 0x15CF
#define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
+#define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010
+#define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000
+#define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001
#define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
#define PCI_SUBDEVICE_ID_NXPCA 0x3335
@@ -66,6 +69,10 @@
bar = 0;
info->name = "netx";
break;
+ case PCI_DEVICE_ID_HILSCHER_NETPLC:
+ bar = 0;
+ info->name = "netplc";
+ break;
default:
bar = 2;
info->name = "netx_plx";
@@ -134,6 +141,18 @@
.subdevice = 0,
},
{
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETPLC,
+ .subvendor = PCI_VENDOR_ID_HILSCHER,
+ .subdevice = PCI_SUBDEVICE_ID_NETPLC_RAM,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETPLC,
+ .subvendor = PCI_VENDOR_ID_HILSCHER,
+ .subdevice = PCI_SUBDEVICE_ID_NETPLC_FLASH,
+ },
+ {
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9030,
.subvendor = PCI_VENDOR_ID_PLX,
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 7174d51..0f424af 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -189,6 +189,10 @@
uio_unregister_device(priv->uioinfo);
pm_runtime_disable(&pdev->dev);
+
+ priv->uioinfo->handler = NULL;
+ priv->uioinfo->irqcontrol = NULL;
+
kfree(priv);
return 0;
}
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 36613b3..3a68e09 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2539,15 +2539,18 @@
}
/* Driver probe functions */
+static const struct of_device_id qe_udc_match[];
static int __devinit qe_udc_probe(struct platform_device *ofdev)
{
+ const struct of_device_id *match;
struct device_node *np = ofdev->dev.of_node;
struct qe_ep *ep;
unsigned int ret = 0;
unsigned int i;
const void *prop;
- if (!ofdev->dev.of_match)
+ match = of_match_device(qe_udc_match, &ofdev->dev);
+ if (!match)
return -EINVAL;
prop = of_get_property(np, "mode", NULL);
@@ -2561,7 +2564,7 @@
return -ENOMEM;
}
- udc_controller->soc_type = (unsigned long)ofdev->dev.of_match->data;
+ udc_controller->soc_type = (unsigned long)match->data;
udc_controller->usb_regs = of_iomap(np, 0);
if (!udc_controller->usb_regs) {
ret = -ENOMEM;
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 48a76022..bf6e11c 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -38,6 +38,7 @@
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 5408186..ade4006 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/slab.h>
+#include <linux/prefetch.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index cb5cd42..82fd249 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,6 +44,7 @@
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 444b60a..365c02f 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -46,6 +46,7 @@
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/io.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 78a39a4..5760769 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -32,6 +32,7 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 7e41a95..627f3a6 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -40,6 +40,7 @@
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
#include <plat/usb.h>
+#include <linux/regulator/consumer.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -118,6 +119,8 @@
struct ehci_hcd *omap_ehci;
int ret = -ENODEV;
int irq;
+ int i;
+ char supply[7];
if (usb_disabled())
return -ENODEV;
@@ -158,6 +161,23 @@
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
+ /* get ehci regulator and enable */
+ for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+ if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
+ pdata->regulator[i] = NULL;
+ continue;
+ }
+ snprintf(supply, sizeof(supply), "hsusb%d", i);
+ pdata->regulator[i] = regulator_get(dev, supply);
+ if (IS_ERR(pdata->regulator[i])) {
+ pdata->regulator[i] = NULL;
+ dev_dbg(dev,
+ "failed to get ehci port%d regulator\n", i);
+ } else {
+ regulator_enable(pdata->regulator[i]);
+ }
+ }
+
ret = omap_usbhs_enable(dev);
if (ret) {
dev_err(dev, "failed to start usbhs with err %d\n", ret);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index f97570a..9c37dad 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -81,6 +81,7 @@
#include <linux/pm.h>
#include <linux/io.h>
#include <linux/bitmap.h>
+#include <linux/prefetch.h>
#include <asm/irq.h>
#include <asm/system.h>
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 795345a..7b2e69a 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1633,6 +1633,7 @@
ints[i].qh = NULL;
ints[i].qtd = NULL;
+ urb->status = status;
isp1760_urb_done(hcd, urb);
if (qtd)
pe(hcd, qh, qtd);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 18b7099..fafccc2 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -47,6 +47,7 @@
#include <linux/usb/sl811.h>
#include <linux/usb/hcd.h>
#include <linux/platform_device.h>
+#include <linux/prefetch.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a78f2eb..73f75d2 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -777,7 +777,7 @@
if (t1 != t2)
xhci_writel(xhci, t2, port_array[port_index]);
- if (DEV_HIGHSPEED(t1)) {
+ if (hcd->speed != HCD_USB3) {
/* enable remote wake up for USB 2.0 */
u32 __iomem *addr;
u32 tmp;
@@ -866,6 +866,21 @@
temp |= PORT_LINK_STROBE | XDEV_U0;
xhci_writel(xhci, temp, port_array[port_index]);
}
+ /* wait for the port to enter U0 and report port link
+ * state change.
+ */
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ msleep(20);
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* Clear PLC */
+ temp = xhci_readl(xhci, port_array[port_index]);
+ if (temp & PORT_PLC) {
+ temp = xhci_port_state_to_neutral(temp);
+ temp |= PORT_PLC;
+ xhci_writel(xhci, temp, port_array[port_index]);
+ }
+
slot_id = xhci_find_slot_id_by_port(hcd,
xhci, port_index + 1);
if (slot_id)
@@ -873,7 +888,7 @@
} else
xhci_writel(xhci, temp, port_array[port_index]);
- if (DEV_HIGHSPEED(temp)) {
+ if (hcd->speed != HCD_USB3) {
/* disable remote wake up for USB 2.0 */
u32 __iomem *addr;
u32 tmp;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6dfbf9f..f47c201 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1887,11 +1887,9 @@
otg_set_vbus(musb->xceiv, 1);
hcd->self.uses_pio_for_control = 1;
-
- if (musb->xceiv->last_event == USB_EVENT_NONE)
- pm_runtime_put(musb->controller);
-
}
+ if (musb->xceiv->last_event == USB_EVENT_NONE)
+ pm_runtime_put(musb->controller);
return 0;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 57a27fa..e9e60b6 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -270,7 +270,7 @@
DBG(4, "VBUS Disconnect\n");
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- if (is_otg_enabled(musb))
+ if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
if (musb->gadget_driver)
#endif
{
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 09e52ba..ffc4193 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -499,7 +499,6 @@
memset(&ata, 0, sizeof(ata));
srb->cmnd = info->cmnd;
srb->device = &srb_dev;
- ++srb->serial_number;
ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 2ab2912..7aa4eea 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -4,7 +4,7 @@
* Author: Michael S. Tsirkin <mst@redhat.com>
*
* Inspiration, some code, and most witty comments come from
- * Documentation/lguest/lguest.c, by Rusty Russell
+ * Documentation/virtual/lguest/lguest.c, by Rusty Russell
*
* This work is licensed under the terms of the GNU GPL, version 2.
*
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 82acb8d..6183a57 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -66,7 +66,7 @@
* have. Allow 1% either way on the nominal for TVs.
*/
#define NR_MONTYPES 6
-static struct fb_monspecs monspecs[NR_MONTYPES] __initdata = {
+static struct fb_monspecs monspecs[NR_MONTYPES] __devinitdata = {
{ /* TV */
.hfmin = 15469,
.hfmax = 15781,
@@ -873,7 +873,7 @@
/*
* Everything after here is initialisation!!!
*/
-static struct fb_videomode modedb[] __initdata = {
+static struct fb_videomode modedb[] __devinitdata = {
{ /* 320x256 @ 50Hz */
NULL, 50, 320, 256, 125000, 92, 62, 35, 19, 38, 2,
FB_SYNC_COMP_HIGH_ACT,
@@ -925,8 +925,7 @@
}
};
-static struct fb_videomode __initdata
-acornfb_default_mode = {
+static struct fb_videomode acornfb_default_mode __devinitdata = {
.name = NULL,
.refresh = 60,
.xres = 640,
@@ -942,7 +941,7 @@
.vmode = FB_VMODE_NONINTERLACED
};
-static void __init acornfb_init_fbinfo(void)
+static void __devinit acornfb_init_fbinfo(void)
{
static int first = 1;
@@ -1018,8 +1017,7 @@
* size can optionally be followed by 'M' or 'K' for
* MB or KB respectively.
*/
-static void __init
-acornfb_parse_mon(char *opt)
+static void __devinit acornfb_parse_mon(char *opt)
{
char *p = opt;
@@ -1066,8 +1064,7 @@
current_par.montype = -1;
}
-static void __init
-acornfb_parse_montype(char *opt)
+static void __devinit acornfb_parse_montype(char *opt)
{
current_par.montype = -2;
@@ -1108,8 +1105,7 @@
}
}
-static void __init
-acornfb_parse_dram(char *opt)
+static void __devinit acornfb_parse_dram(char *opt)
{
unsigned int size;
@@ -1134,15 +1130,14 @@
static struct options {
char *name;
void (*parse)(char *opt);
-} opt_table[] __initdata = {
+} opt_table[] __devinitdata = {
{ "mon", acornfb_parse_mon },
{ "montype", acornfb_parse_montype },
{ "dram", acornfb_parse_dram },
{ NULL, NULL }
};
-int __init
-acornfb_setup(char *options)
+static int __devinit acornfb_setup(char *options)
{
struct options *optp;
char *opt;
@@ -1179,8 +1174,7 @@
* Detect type of monitor connected
* For now, we just assume SVGA
*/
-static int __init
-acornfb_detect_monitortype(void)
+static int __devinit acornfb_detect_monitortype(void)
{
return 4;
}
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 5b2b5ef..64e41f5 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -3117,7 +3117,7 @@
atafb_ops.fb_setcolreg = &falcon_setcolreg;
error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
IRQ_TYPE_PRIO,
- "framebuffer/modeswitch",
+ "framebuffer:modeswitch",
falcon_vbl_switcher);
if (error)
return error;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index e0c22849..5aac00e 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -42,9 +42,34 @@
#define FBPIXMAPSIZE (1024 * 8)
+static DEFINE_MUTEX(registration_lock);
struct fb_info *registered_fb[FB_MAX] __read_mostly;
int num_registered_fb __read_mostly;
+static struct fb_info *get_fb_info(unsigned int idx)
+{
+ struct fb_info *fb_info;
+
+ if (idx >= FB_MAX)
+ return ERR_PTR(-ENODEV);
+
+ mutex_lock(®istration_lock);
+ fb_info = registered_fb[idx];
+ if (fb_info)
+ atomic_inc(&fb_info->count);
+ mutex_unlock(®istration_lock);
+
+ return fb_info;
+}
+
+static void put_fb_info(struct fb_info *fb_info)
+{
+ if (!atomic_dec_and_test(&fb_info->count))
+ return;
+ if (fb_info->fbops->fb_destroy)
+ fb_info->fbops->fb_destroy(fb_info);
+}
+
int lock_fb_info(struct fb_info *info)
{
mutex_lock(&info->lock);
@@ -647,6 +672,7 @@
static void *fb_seq_start(struct seq_file *m, loff_t *pos)
{
+ mutex_lock(®istration_lock);
return (*pos < FB_MAX) ? pos : NULL;
}
@@ -658,6 +684,7 @@
static void fb_seq_stop(struct seq_file *m, void *v)
{
+ mutex_unlock(®istration_lock);
}
static int fb_seq_show(struct seq_file *m, void *v)
@@ -690,13 +717,30 @@
.release = seq_release,
};
+/*
+ * We hold a reference to the fb_info in file->private_data,
+ * but if the current registered fb has changed, we don't
+ * actually want to use it.
+ *
+ * So look up the fb_info using the inode minor number,
+ * and just verify it against the reference we have.
+ */
+static struct fb_info *file_fb_info(struct file *file)
+{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ int fbidx = iminor(inode);
+ struct fb_info *info = registered_fb[fbidx];
+
+ if (info != file->private_data)
+ info = NULL;
+ return info;
+}
+
static ssize_t
fb_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
- struct inode *inode = file->f_path.dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
+ struct fb_info *info = file_fb_info(file);
u8 *buffer, *dst;
u8 __iomem *src;
int c, cnt = 0, err = 0;
@@ -761,9 +805,7 @@
fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
- struct inode *inode = file->f_path.dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
+ struct fb_info *info = file_fb_info(file);
u8 *buffer, *src;
u8 __iomem *dst;
int c, cnt = 0, err = 0;
@@ -1141,10 +1183,10 @@
static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_path.dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
+ struct fb_info *info = file_fb_info(file);
+ if (!info)
+ return -ENODEV;
return do_fb_ioctl(info, cmd, arg);
}
@@ -1265,12 +1307,13 @@
static long fb_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
- struct inode *inode = file->f_path.dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
- struct fb_ops *fb = info->fbops;
+ struct fb_info *info = file_fb_info(file);
+ struct fb_ops *fb;
long ret = -ENOIOCTLCMD;
+ if (!info)
+ return -ENODEV;
+ fb = info->fbops;
switch(cmd) {
case FBIOGET_VSCREENINFO:
case FBIOPUT_VSCREENINFO:
@@ -1303,16 +1346,18 @@
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
{
- int fbidx = iminor(file->f_path.dentry->d_inode);
- struct fb_info *info = registered_fb[fbidx];
- struct fb_ops *fb = info->fbops;
+ struct fb_info *info = file_fb_info(file);
+ struct fb_ops *fb;
unsigned long off;
unsigned long start;
u32 len;
+ if (!info)
+ return -ENODEV;
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
return -EINVAL;
off = vma->vm_pgoff << PAGE_SHIFT;
+ fb = info->fbops;
if (!fb)
return -ENODEV;
mutex_lock(&info->mm_lock);
@@ -1361,14 +1406,16 @@
struct fb_info *info;
int res = 0;
- if (fbidx >= FB_MAX)
- return -ENODEV;
- info = registered_fb[fbidx];
- if (!info)
+ info = get_fb_info(fbidx);
+ if (!info) {
request_module("fb%d", fbidx);
- info = registered_fb[fbidx];
- if (!info)
- return -ENODEV;
+ info = get_fb_info(fbidx);
+ if (!info)
+ return -ENODEV;
+ }
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
mutex_lock(&info->lock);
if (!try_module_get(info->fbops->owner)) {
res = -ENODEV;
@@ -1386,6 +1433,8 @@
#endif
out:
mutex_unlock(&info->lock);
+ if (res)
+ put_fb_info(info);
return res;
}
@@ -1401,6 +1450,7 @@
info->fbops->fb_release(info,1);
module_put(info->fbops->owner);
mutex_unlock(&info->lock);
+ put_fb_info(info);
return 0;
}
@@ -1487,8 +1537,10 @@
return false;
}
+static int do_unregister_framebuffer(struct fb_info *fb_info);
+
#define VGA_FB_PHYS 0xA0000
-void remove_conflicting_framebuffers(struct apertures_struct *a,
+static void do_remove_conflicting_framebuffers(struct apertures_struct *a,
const char *name, bool primary)
{
int i;
@@ -1510,43 +1562,32 @@
printk(KERN_INFO "fb: conflicting fb hw usage "
"%s vs %s - removing generic driver\n",
name, registered_fb[i]->fix.id);
- unregister_framebuffer(registered_fb[i]);
+ do_unregister_framebuffer(registered_fb[i]);
}
}
}
-EXPORT_SYMBOL(remove_conflicting_framebuffers);
-/**
- * register_framebuffer - registers a frame buffer device
- * @fb_info: frame buffer info structure
- *
- * Registers a frame buffer device @fb_info.
- *
- * Returns negative errno on error, or zero for success.
- *
- */
-
-int
-register_framebuffer(struct fb_info *fb_info)
+static int do_register_framebuffer(struct fb_info *fb_info)
{
int i;
struct fb_event event;
struct fb_videomode mode;
- if (num_registered_fb == FB_MAX)
- return -ENXIO;
-
if (fb_check_foreignness(fb_info))
return -ENOSYS;
- remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
+ do_remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
fb_is_primary_device(fb_info));
+ if (num_registered_fb == FB_MAX)
+ return -ENXIO;
+
num_registered_fb++;
for (i = 0 ; i < FB_MAX; i++)
if (!registered_fb[i])
break;
fb_info->node = i;
+ atomic_set(&fb_info->count, 1);
mutex_init(&fb_info->lock);
mutex_init(&fb_info->mm_lock);
@@ -1592,6 +1633,69 @@
return 0;
}
+static int do_unregister_framebuffer(struct fb_info *fb_info)
+{
+ struct fb_event event;
+ int i, ret = 0;
+
+ i = fb_info->node;
+ if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
+ return -EINVAL;
+
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
+ event.info = fb_info;
+ ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ unlock_fb_info(fb_info);
+
+ if (ret)
+ return -EINVAL;
+
+ if (fb_info->pixmap.addr &&
+ (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
+ kfree(fb_info->pixmap.addr);
+ fb_destroy_modelist(&fb_info->modelist);
+ registered_fb[i] = NULL;
+ num_registered_fb--;
+ fb_cleanup_device(fb_info);
+ device_destroy(fb_class, MKDEV(FB_MAJOR, i));
+ event.info = fb_info;
+ fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
+
+ /* this may free fb info */
+ put_fb_info(fb_info);
+ return 0;
+}
+
+void remove_conflicting_framebuffers(struct apertures_struct *a,
+ const char *name, bool primary)
+{
+ mutex_lock(®istration_lock);
+ do_remove_conflicting_framebuffers(a, name, primary);
+ mutex_unlock(®istration_lock);
+}
+EXPORT_SYMBOL(remove_conflicting_framebuffers);
+
+/**
+ * register_framebuffer - registers a frame buffer device
+ * @fb_info: frame buffer info structure
+ *
+ * Registers a frame buffer device @fb_info.
+ *
+ * Returns negative errno on error, or zero for success.
+ *
+ */
+int
+register_framebuffer(struct fb_info *fb_info)
+{
+ int ret;
+
+ mutex_lock(®istration_lock);
+ ret = do_register_framebuffer(fb_info);
+ mutex_unlock(®istration_lock);
+
+ return ret;
+}
/**
* unregister_framebuffer - releases a frame buffer device
@@ -1609,46 +1713,15 @@
* that the driver implements fb_open() and fb_release() to
* check that no processes are using the device.
*/
-
int
unregister_framebuffer(struct fb_info *fb_info)
{
- struct fb_event event;
- int i, ret = 0;
+ int ret;
- i = fb_info->node;
- if (!registered_fb[i]) {
- ret = -EINVAL;
- goto done;
- }
+ mutex_lock(®istration_lock);
+ ret = do_unregister_framebuffer(fb_info);
+ mutex_unlock(®istration_lock);
-
- if (!lock_fb_info(fb_info))
- return -ENODEV;
- event.info = fb_info;
- ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
- unlock_fb_info(fb_info);
-
- if (ret) {
- ret = -EINVAL;
- goto done;
- }
-
- if (fb_info->pixmap.addr &&
- (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
- kfree(fb_info->pixmap.addr);
- fb_destroy_modelist(&fb_info->modelist);
- registered_fb[i]=NULL;
- num_registered_fb--;
- fb_cleanup_device(fb_info);
- device_destroy(fb_class, MKDEV(FB_MAJOR, i));
- event.info = fb_info;
- fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
-
- /* this may free fb info */
- if (fb_info->fbops->fb_destroy)
- fb_info->fbops->fb_destroy(fb_info);
-done:
return ret;
}
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 68041d9..695066b 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -27,6 +27,7 @@
#include <linux/fb.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/prefetch.h>
#include <linux/delay.h>
#include <video/udlfb.h>
#include "edid.h"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 1b0f98b..022f9eb 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -990,6 +990,12 @@
To compile this driver as a loadable module, choose M here.
The module will be called bcm63xx_wdt.
+config LANTIQ_WDT
+ tristate "Lantiq SoC watchdog"
+ depends on LANTIQ
+ help
+ Hardware driver for the Lantiq SoC Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 3f8608b..ed26f70 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -123,6 +123,7 @@
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
# PARISC Architecture
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
new file mode 100644
index 0000000..7d82ada
--- /dev/null
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -0,0 +1,261 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Based on EP93xx wdt driver
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <lantiq.h>
+
+/* Section 3.4 of the datasheet
+ * The password sequence protects the WDT control register from unintended
+ * write actions, which might cause malfunction of the WDT.
+ *
+ * essentially the following two magic passwords need to be written to allow
+ * IO access to the WDT core
+ */
+#define LTQ_WDT_PW1 0x00BE0000
+#define LTQ_WDT_PW2 0x00DC0000
+
+#define LTQ_WDT_CR 0x0 /* watchdog control register */
+#define LTQ_WDT_SR 0x8 /* watchdog status register */
+
+#define LTQ_WDT_SR_EN (0x1 << 31) /* enable bit */
+#define LTQ_WDT_SR_PWD (0x3 << 26) /* turn on power */
+#define LTQ_WDT_SR_CLKDIV (0x3 << 24) /* turn on clock and set */
+ /* divider to 0x40000 */
+#define LTQ_WDT_DIVIDER 0x40000
+#define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static void __iomem *ltq_wdt_membase;
+static unsigned long ltq_io_region_clk_rate;
+
+static unsigned long ltq_wdt_bootstatus;
+static unsigned long ltq_wdt_in_use;
+static int ltq_wdt_timeout = 30;
+static int ltq_wdt_ok_to_close;
+
+static void
+ltq_wdt_enable(void)
+{
+ ltq_wdt_timeout = ltq_wdt_timeout *
+ (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
+ if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
+ ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+
+ /* write the first password magic */
+ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+ /* write the second magic plus the configuration and new timeout */
+ ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
+ LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static void
+ltq_wdt_disable(void)
+{
+ /* write the first password magic */
+ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+ /* write the second password magic with no config
+ * this turns the watchdog off
+ */
+ ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static ssize_t
+ltq_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ ltq_wdt_ok_to_close = 0;
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ ltq_wdt_ok_to_close = 1;
+ else
+ ltq_wdt_ok_to_close = 0;
+ }
+ }
+ ltq_wdt_enable();
+ }
+
+ return len;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+ WDIOF_CARDRESET,
+ .identity = "ltq_wdt",
+};
+
+static long
+ltq_wdt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret = -ENOTTY;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
+ break;
+
+ case WDIOC_GETSTATUS:
+ ret = put_user(0, (int __user *)arg);
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(ltq_wdt_timeout, (int __user *)arg);
+ if (!ret)
+ ltq_wdt_enable();
+ /* intentional drop through */
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(ltq_wdt_timeout, (int __user *)arg);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ ltq_wdt_enable();
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+static int
+ltq_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, <q_wdt_in_use))
+ return -EBUSY;
+ ltq_wdt_in_use = 1;
+ ltq_wdt_enable();
+
+ return nonseekable_open(inode, file);
+}
+
+static int
+ltq_wdt_release(struct inode *inode, struct file *file)
+{
+ if (ltq_wdt_ok_to_close)
+ ltq_wdt_disable();
+ else
+ pr_err("ltq_wdt: watchdog closed without warning\n");
+ ltq_wdt_ok_to_close = 0;
+ clear_bit(0, <q_wdt_in_use);
+
+ return 0;
+}
+
+static const struct file_operations ltq_wdt_fops = {
+ .owner = THIS_MODULE,
+ .write = ltq_wdt_write,
+ .unlocked_ioctl = ltq_wdt_ioctl,
+ .open = ltq_wdt_open,
+ .release = ltq_wdt_release,
+ .llseek = no_llseek,
+};
+
+static struct miscdevice ltq_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = <q_wdt_fops,
+};
+
+static int __init
+ltq_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct clk *clk;
+
+ if (!res) {
+ dev_err(&pdev->dev, "cannot obtain I/O memory region");
+ return -ENOENT;
+ }
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "cannot request I/O memory region");
+ return -EBUSY;
+ }
+ ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!ltq_wdt_membase) {
+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+ return -ENOMEM;
+ }
+
+ /* we do not need to enable the clock as it is always running */
+ clk = clk_get(&pdev->dev, "io");
+ WARN_ON(!clk);
+ ltq_io_region_clk_rate = clk_get_rate(clk);
+ clk_put(clk);
+
+ if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST)
+ ltq_wdt_bootstatus = WDIOF_CARDRESET;
+
+ return misc_register(<q_wdt_miscdev);
+}
+
+static int __devexit
+ltq_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(<q_wdt_miscdev);
+
+ if (ltq_wdt_membase)
+ iounmap(ltq_wdt_membase);
+
+ return 0;
+}
+
+
+static struct platform_driver ltq_wdt_driver = {
+ .remove = __devexit_p(ltq_wdt_remove),
+ .driver = {
+ .name = "ltq_wdt",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init
+init_ltq_wdt(void)
+{
+ return platform_driver_probe(<q_wdt_driver, ltq_wdt_probe);
+}
+
+static void __exit
+exit_ltq_wdt(void)
+{
+ return platform_driver_unregister(<q_wdt_driver);
+}
+
+module_init(init_ltq_wdt);
+module_exit(exit_ltq_wdt);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 528bceb..eed5436f 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -185,17 +185,20 @@
.fops = &mpc8xxx_wdt_fops,
};
+static const struct of_device_id mpc8xxx_wdt_match[];
static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev)
{
int ret;
+ const struct of_device_id *match;
struct device_node *np = ofdev->dev.of_node;
struct mpc8xxx_wdt_type *wdt_type;
u32 freq = fsl_get_sys_freq();
bool enabled;
- if (!ofdev->dev.of_match)
+ match = of_match_device(mpc8xxx_wdt_match, &ofdev->dev);
+ if (!match)
return -EINVAL;
- wdt_type = ofdev->dev.of_match->data;
+ wdt_type = match->data;
if (!freq || freq == -1)
return -EINVAL;
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 5ec5ac1..1479dc4 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,6 +66,7 @@
int default_ticks;
unsigned long inuse;
unsigned gpio;
+ int gstate;
} mtx1_wdt_device;
static void mtx1_wdt_trigger(unsigned long unused)
@@ -75,13 +76,13 @@
spin_lock(&mtx1_wdt_device.lock);
if (mtx1_wdt_device.running)
ticks--;
- /*
- * toggle GPIO2_15
- */
- tmp = au_readl(GPIO2_DIR);
- tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
- ((~tmp) & (1 << mtx1_wdt_device.gpio));
- au_writel(tmp, GPIO2_DIR);
+
+ /* toggle wdt gpio */
+ mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
+ if (mtx1_wdt_device.gstate)
+ gpio_direction_output(mtx1_wdt_device.gpio, 1);
+ else
+ gpio_direction_input(mtx1_wdt_device.gpio);
if (mtx1_wdt_device.queue && ticks)
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -103,7 +104,8 @@
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
- gpio_set_value(mtx1_wdt_device.gpio, 1);
+ mtx1_wdt_device.gstate = 1;
+ gpio_direction_output(mtx1_wdt_device.gpio, 1);
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
}
mtx1_wdt_device.running++;
@@ -117,7 +119,8 @@
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
- gpio_set_value(mtx1_wdt_device.gpio, 0);
+ mtx1_wdt_device.gstate = 0;
+ gpio_direction_output(mtx1_wdt_device.gpio, 0);
}
ticks = mtx1_wdt_device.default_ticks;
spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index f420f1f..4781f80 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -4,21 +4,21 @@
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_features.o := $(nostackp)
-obj-$(CONFIG_BLOCK) += biomerge.o
-obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
-obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
-obj-$(CONFIG_XEN_BALLOON) += xen-balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o
-obj-$(CONFIG_XEN_GNTDEV) += xen-gntdev.o
+obj-$(CONFIG_BLOCK) += biomerge.o
+obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
+obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
+obj-$(CONFIG_XEN_BALLOON) += xen-balloon.o
+obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o
+obj-$(CONFIG_XEN_GNTDEV) += xen-gntdev.o
obj-$(CONFIG_XEN_GRANT_DEV_ALLOC) += xen-gntalloc.o
-obj-$(CONFIG_XENFS) += xenfs/
+obj-$(CONFIG_XENFS) += xenfs/
obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o
-obj-$(CONFIG_XEN_PLATFORM_PCI) += xen-platform-pci.o
-obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o
-obj-$(CONFIG_XEN_DOM0) += pci.o
+obj-$(CONFIG_XEN_PLATFORM_PCI) += xen-platform-pci.o
+obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o
+obj-$(CONFIG_XEN_DOM0) += pci.o
-xen-evtchn-y := evtchn.o
+xen-evtchn-y := evtchn.o
xen-gntdev-y := gntdev.o
xen-gntalloc-y := gntalloc.o
-xen-platform-pci-y := platform-pci.o
+xen-platform-pci-y := platform-pci.o
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 043af8a..f54290b 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -114,7 +114,6 @@
if (PageHighMem(page)) {
list_add_tail(&page->lru, &ballooned_pages);
balloon_stats.balloon_high++;
- dec_totalhigh_pages();
} else {
list_add(&page->lru, &ballooned_pages);
balloon_stats.balloon_low++;
@@ -124,6 +123,8 @@
static void balloon_append(struct page *page)
{
__balloon_append(page);
+ if (PageHighMem(page))
+ dec_totalhigh_pages();
totalram_pages--;
}
@@ -193,7 +194,7 @@
return BP_EAGAIN;
}
-static unsigned long current_target(void)
+static long current_credit(void)
{
unsigned long target = balloon_stats.target_pages;
@@ -202,7 +203,7 @@
balloon_stats.balloon_low +
balloon_stats.balloon_high);
- return target;
+ return target - balloon_stats.current_pages;
}
static enum bp_state increase_reservation(unsigned long nr_pages)
@@ -246,7 +247,7 @@
set_phys_to_machine(pfn, frame_list[i]);
/* Link back into the page tables if not highmem. */
- if (!xen_hvm_domain() && pfn < max_low_pfn) {
+ if (xen_pv_domain() && !PageHighMem(page)) {
int ret;
ret = HYPERVISOR_update_va_mapping(
(unsigned long)__va(pfn << PAGE_SHIFT),
@@ -293,7 +294,7 @@
scrub_page(page);
- if (!xen_hvm_domain() && !PageHighMem(page)) {
+ if (xen_pv_domain() && !PageHighMem(page)) {
ret = HYPERVISOR_update_va_mapping(
(unsigned long)__va(pfn << PAGE_SHIFT),
__pte_ma(0), 0);
@@ -337,7 +338,7 @@
mutex_lock(&balloon_mutex);
do {
- credit = current_target() - balloon_stats.current_pages;
+ credit = current_credit();
if (credit > 0)
state = increase_reservation(credit);
@@ -420,7 +421,7 @@
}
/* The balloon may be too large now. Shrink it if needed. */
- if (current_target() != balloon_stats.current_pages)
+ if (current_credit())
schedule_delayed_work(&balloon_worker, 0);
mutex_unlock(&balloon_mutex);
@@ -429,7 +430,7 @@
static int __init balloon_init(void)
{
- unsigned long pfn, nr_pages, extra_pfn_end;
+ unsigned long pfn, extra_pfn_end;
struct page *page;
if (!xen_domain())
@@ -437,11 +438,7 @@
pr_info("xen/balloon: Initialising balloon driver.\n");
- if (xen_pv_domain())
- nr_pages = xen_start_info->nr_pages;
- else
- nr_pages = max_pfn;
- balloon_stats.current_pages = min(nr_pages, max_pfn);
+ balloon_stats.current_pages = xen_pv_domain() ? min(xen_start_info->nr_pages, max_pfn) : max_pfn;
balloon_stats.target_pages = balloon_stats.current_pages;
balloon_stats.balloon_low = 0;
balloon_stats.balloon_high = 0;
@@ -466,7 +463,7 @@
pfn < extra_pfn_end;
pfn++) {
page = pfn_to_page(pfn);
- /* totalram_pages doesn't include the boot-time
+ /* totalram_pages and totalhigh_pages do not include the boot-time
balloon extension, so don't subtract from it. */
__balloon_append(page);
}
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 33167b4..3ff822b 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -101,6 +101,7 @@
unsigned short gsi;
unsigned char vector;
unsigned char flags;
+ uint16_t domid;
} pirq;
} u;
};
@@ -118,6 +119,8 @@
static struct irq_chip xen_dynamic_chip;
static struct irq_chip xen_percpu_chip;
static struct irq_chip xen_pirq_chip;
+static void enable_dynirq(struct irq_data *data);
+static void disable_dynirq(struct irq_data *data);
/* Get info for IRQ */
static struct irq_info *info_for_irq(unsigned irq)
@@ -184,6 +187,7 @@
unsigned short pirq,
unsigned short gsi,
unsigned short vector,
+ uint16_t domid,
unsigned char flags)
{
struct irq_info *info = info_for_irq(irq);
@@ -193,6 +197,7 @@
info->u.pirq.pirq = pirq;
info->u.pirq.gsi = gsi;
info->u.pirq.vector = vector;
+ info->u.pirq.domid = domid;
info->u.pirq.flags = flags;
}
@@ -473,16 +478,6 @@
irq_free_desc(irq);
}
-static void pirq_unmask_notify(int irq)
-{
- struct physdev_eoi eoi = { .irq = pirq_from_irq(irq) };
-
- if (unlikely(pirq_needs_eoi(irq))) {
- int rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
- WARN_ON(rc);
- }
-}
-
static void pirq_query_unmask(int irq)
{
struct physdev_irq_status_query irq_status;
@@ -506,6 +501,29 @@
return desc && desc->action == NULL;
}
+static void eoi_pirq(struct irq_data *data)
+{
+ int evtchn = evtchn_from_irq(data->irq);
+ struct physdev_eoi eoi = { .irq = pirq_from_irq(data->irq) };
+ int rc = 0;
+
+ irq_move_irq(data);
+
+ if (VALID_EVTCHN(evtchn))
+ clear_evtchn(evtchn);
+
+ if (pirq_needs_eoi(data->irq)) {
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
+ WARN_ON(rc);
+ }
+}
+
+static void mask_ack_pirq(struct irq_data *data)
+{
+ disable_dynirq(data);
+ eoi_pirq(data);
+}
+
static unsigned int __startup_pirq(unsigned int irq)
{
struct evtchn_bind_pirq bind_pirq;
@@ -539,7 +557,7 @@
out:
unmask_evtchn(evtchn);
- pirq_unmask_notify(irq);
+ eoi_pirq(irq_get_irq_data(irq));
return 0;
}
@@ -579,18 +597,7 @@
static void disable_pirq(struct irq_data *data)
{
-}
-
-static void ack_pirq(struct irq_data *data)
-{
- int evtchn = evtchn_from_irq(data->irq);
-
- irq_move_irq(data);
-
- if (VALID_EVTCHN(evtchn)) {
- mask_evtchn(evtchn);
- clear_evtchn(evtchn);
- }
+ disable_dynirq(data);
}
static int find_irq_by_gsi(unsigned gsi)
@@ -639,9 +646,6 @@
if (irq < 0)
goto out;
- irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_level_irq,
- name);
-
irq_op.irq = irq;
irq_op.vector = 0;
@@ -655,9 +659,35 @@
goto out;
}
- xen_irq_info_pirq_init(irq, 0, pirq, gsi, irq_op.vector,
+ xen_irq_info_pirq_init(irq, 0, pirq, gsi, irq_op.vector, DOMID_SELF,
shareable ? PIRQ_SHAREABLE : 0);
+ pirq_query_unmask(irq);
+ /* We try to use the handler with the appropriate semantic for the
+ * type of interrupt: if the interrupt doesn't need an eoi
+ * (pirq_needs_eoi returns false), we treat it like an edge
+ * triggered interrupt so we use handle_edge_irq.
+ * As a matter of fact this only happens when the corresponding
+ * physical interrupt is edge triggered or an msi.
+ *
+ * On the other hand if the interrupt needs an eoi (pirq_needs_eoi
+ * returns true) we treat it like a level triggered interrupt so we
+ * use handle_fasteoi_irq like the native code does for this kind of
+ * interrupts.
+ * Depending on the Xen version, pirq_needs_eoi might return true
+ * not only for level triggered interrupts but for edge triggered
+ * interrupts too. In any case Xen always honors the eoi mechanism,
+ * not injecting any more pirqs of the same kind if the first one
+ * hasn't received an eoi yet. Therefore using the fasteoi handler
+ * is the right choice either way.
+ */
+ if (pirq_needs_eoi(irq))
+ irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
+ handle_fasteoi_irq, name);
+ else
+ irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
+ handle_edge_irq, name);
+
out:
spin_unlock(&irq_mapping_update_lock);
@@ -680,7 +710,8 @@
}
int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
- int pirq, int vector, const char *name)
+ int pirq, int vector, const char *name,
+ domid_t domid)
{
int irq, ret;
@@ -690,10 +721,10 @@
if (irq == -1)
goto out;
- irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_level_irq,
- name);
+ irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_edge_irq,
+ name);
- xen_irq_info_pirq_init(irq, 0, pirq, 0, vector, 0);
+ xen_irq_info_pirq_init(irq, 0, pirq, 0, vector, domid, 0);
ret = irq_set_msi_desc(irq, msidesc);
if (ret < 0)
goto error_irq;
@@ -722,9 +753,16 @@
if (xen_initial_domain()) {
unmap_irq.pirq = info->u.pirq.pirq;
- unmap_irq.domid = DOMID_SELF;
+ unmap_irq.domid = info->u.pirq.domid;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
- if (rc) {
+ /* If another domain quits without making the pci_disable_msix
+ * call, the Xen hypervisor takes care of freeing the PIRQs
+ * (free_domain_pirqs).
+ */
+ if ((rc == -ESRCH && info->u.pirq.domid != DOMID_SELF))
+ printk(KERN_INFO "domain %d does not have %d anymore\n",
+ info->u.pirq.domid, info->u.pirq.pirq);
+ else if (rc) {
printk(KERN_WARNING "unmap irq failed %d\n", rc);
goto out;
}
@@ -759,6 +797,12 @@
return irq;
}
+
+int xen_pirq_from_irq(unsigned irq)
+{
+ return pirq_from_irq(irq);
+}
+EXPORT_SYMBOL_GPL(xen_pirq_from_irq);
int bind_evtchn_to_irq(unsigned int evtchn)
{
int irq;
@@ -773,7 +817,7 @@
goto out;
irq_set_chip_and_handler_name(irq, &xen_dynamic_chip,
- handle_fasteoi_irq, "event");
+ handle_edge_irq, "event");
xen_irq_info_evtchn_init(irq, evtchn);
}
@@ -1179,9 +1223,6 @@
port = (word_idx * BITS_PER_LONG) + bit_idx;
irq = evtchn_to_irq[port];
- mask_evtchn(port);
- clear_evtchn(port);
-
if (irq != -1) {
desc = irq_to_desc(irq);
if (desc)
@@ -1337,10 +1378,16 @@
{
int evtchn = evtchn_from_irq(data->irq);
- irq_move_masked_irq(data);
+ irq_move_irq(data);
if (VALID_EVTCHN(evtchn))
- unmask_evtchn(evtchn);
+ clear_evtchn(evtchn);
+}
+
+static void mask_ack_dynirq(struct irq_data *data)
+{
+ disable_dynirq(data);
+ ack_dynirq(data);
}
static int retrigger_dynirq(struct irq_data *data)
@@ -1502,6 +1549,18 @@
xen_poll_irq_timeout(irq, 0 /* no timeout */);
}
+/* Check whether the IRQ line is shared with other guests. */
+int xen_test_irq_shared(int irq)
+{
+ struct irq_info *info = info_for_irq(irq);
+ struct physdev_irq_status_query irq_status = { .irq = info->u.pirq.pirq };
+
+ if (HYPERVISOR_physdev_op(PHYSDEVOP_irq_status_query, &irq_status))
+ return 0;
+ return !(irq_status.flags & XENIRQSTAT_shared);
+}
+EXPORT_SYMBOL_GPL(xen_test_irq_shared);
+
void xen_irq_resume(void)
{
unsigned int cpu, evtchn;
@@ -1535,7 +1594,9 @@
.irq_mask = disable_dynirq,
.irq_unmask = enable_dynirq,
- .irq_eoi = ack_dynirq,
+ .irq_ack = ack_dynirq,
+ .irq_mask_ack = mask_ack_dynirq,
+
.irq_set_affinity = set_affinity_irq,
.irq_retrigger = retrigger_dynirq,
};
@@ -1545,14 +1606,15 @@
.irq_startup = startup_pirq,
.irq_shutdown = shutdown_pirq,
-
.irq_enable = enable_pirq,
- .irq_unmask = enable_pirq,
-
.irq_disable = disable_pirq,
- .irq_mask = disable_pirq,
- .irq_ack = ack_pirq,
+ .irq_mask = disable_dynirq,
+ .irq_unmask = enable_dynirq,
+
+ .irq_ack = eoi_pirq,
+ .irq_eoi = eoi_pirq,
+ .irq_mask_ack = mask_ack_pirq,
.irq_set_affinity = set_affinity_irq,
diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c
index a7ffdfe..f6832f4 100644
--- a/drivers/xen/gntalloc.c
+++ b/drivers/xen/gntalloc.c
@@ -427,6 +427,17 @@
return 0;
}
+static void gntalloc_vma_open(struct vm_area_struct *vma)
+{
+ struct gntalloc_gref *gref = vma->vm_private_data;
+ if (!gref)
+ return;
+
+ spin_lock(&gref_lock);
+ gref->users++;
+ spin_unlock(&gref_lock);
+}
+
static void gntalloc_vma_close(struct vm_area_struct *vma)
{
struct gntalloc_gref *gref = vma->vm_private_data;
@@ -441,6 +452,7 @@
}
static struct vm_operations_struct gntalloc_vmops = {
+ .open = gntalloc_vma_open,
.close = gntalloc_vma_close,
};
@@ -471,8 +483,6 @@
vma->vm_private_data = gref;
vma->vm_flags |= VM_RESERVED;
- vma->vm_flags |= VM_DONTCOPY;
- vma->vm_flags |= VM_PFNMAP | VM_PFN_AT_MMAP;
vma->vm_ops = &gntalloc_vmops;
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index b0f9e8f..f914b26 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -330,17 +330,26 @@
/* ------------------------------------------------------------------ */
+static void gntdev_vma_open(struct vm_area_struct *vma)
+{
+ struct grant_map *map = vma->vm_private_data;
+
+ pr_debug("gntdev_vma_open %p\n", vma);
+ atomic_inc(&map->users);
+}
+
static void gntdev_vma_close(struct vm_area_struct *vma)
{
struct grant_map *map = vma->vm_private_data;
- pr_debug("close %p\n", vma);
+ pr_debug("gntdev_vma_close %p\n", vma);
map->vma = NULL;
vma->vm_private_data = NULL;
gntdev_put_map(map);
}
static struct vm_operations_struct gntdev_vmops = {
+ .open = gntdev_vma_open,
.close = gntdev_vma_close,
};
@@ -652,7 +661,10 @@
vma->vm_ops = &gntdev_vmops;
- vma->vm_flags |= VM_RESERVED|VM_DONTCOPY|VM_DONTEXPAND|VM_PFNMAP;
+ vma->vm_flags |= VM_RESERVED|VM_DONTEXPAND;
+
+ if (use_ptemod)
+ vma->vm_flags |= VM_DONTCOPY|VM_PFNMAP;
vma->vm_private_data = map;
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 3745a31..fd725cd 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -466,13 +466,30 @@
if (map_ops[i].status)
continue;
- /* m2p override only supported for GNTMAP_contains_pte mappings */
- if (!(map_ops[i].flags & GNTMAP_contains_pte))
- continue;
- pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) +
+ if (map_ops[i].flags & GNTMAP_contains_pte) {
+ pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) +
(map_ops[i].host_addr & ~PAGE_MASK));
- mfn = pte_mfn(*pte);
- ret = m2p_add_override(mfn, pages[i]);
+ mfn = pte_mfn(*pte);
+ } else {
+ /* If you really wanted to do this:
+ * mfn = PFN_DOWN(map_ops[i].dev_bus_addr);
+ *
+ * The reason we do not implement it is b/c on the
+ * unmap path (gnttab_unmap_refs) we have no means of
+ * checking whether the page is !GNTMAP_contains_pte.
+ *
+ * That is without some extra data-structure to carry
+ * the struct page, bool clear_pte, and list_head next
+ * tuples and deal with allocation/delallocation, etc.
+ *
+ * The users of this API set the GNTMAP_contains_pte
+ * flag so lets just return not supported until it
+ * becomes neccessary to implement.
+ */
+ return -EOPNOTSUPP;
+ }
+ ret = m2p_add_override(mfn, pages[i],
+ map_ops[i].flags & GNTMAP_contains_pte);
if (ret)
return ret;
}
@@ -494,7 +511,7 @@
return ret;
for (i = 0; i < count; i++) {
- ret = m2p_remove_override(pages[i]);
+ ret = m2p_remove_override(pages[i], true /* clear the PTE */);
if (ret)
return ret;
}
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index a2eee57..0b5366b 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -70,12 +70,7 @@
BUG_ON(!irqs_disabled());
- err = sysdev_suspend(PMSG_FREEZE);
- if (!err) {
- err = syscore_suspend();
- if (err)
- sysdev_resume();
- }
+ err = syscore_suspend();
if (err) {
printk(KERN_ERR "xen_suspend: system core suspend failed: %d\n",
err);
@@ -102,7 +97,6 @@
}
syscore_resume();
- sysdev_resume();
return 0;
}
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index 60f1827..1e0fe01 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -215,7 +215,7 @@
.attrs = xen_compile_attrs,
};
-int __init static xen_compilation_init(void)
+static int __init xen_compilation_init(void)
{
return sysfs_create_group(hypervisor_kobj, &xen_compilation_group);
}
diff --git a/firmware/Makefile b/firmware/Makefile
index 0384afa..0d15a3d 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,9 +32,9 @@
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.5.0.fw \
- bnx2x/bnx2x-e1h-6.2.5.0.fw \
- bnx2x/bnx2x-e2-6.2.5.0.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw \
+ bnx2x/bnx2x-e1h-6.2.9.0.fw \
+ bnx2x/bnx2x-e2-6.2.9.0.fw
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \
bnx2/bnx2-rv2p-09-6.0.17.fw \
bnx2/bnx2-rv2p-09ax-6.0.17.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 76404f9..182ecb6 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -679,14 +679,15 @@
Driver: bnx2x: Broadcom Everest
-File: bnx2x/bnx2x-e1-5.2.13.0.fw
-File: bnx2x/bnx2x-e1h-5.2.13.0.fw
+File: bnx2x/bnx2x-e1-6.2.9.0.fw
+File: bnx2x/bnx2x-e1h-6.2.9.0.fw
+File: bnx2x/bnx2x-e2-6.2.9.0.fw
License:
- Copyright (c) 2007-2010 Broadcom Corporation
+ Copyright (c) 2007-2011 Broadcom Corporation
This file contains firmware data derived from proprietary unpublished
- source code, Copyright (c) 2007-2009 Broadcom Corporation.
+ source code, Copyright (c) 2007-2011 Broadcom Corporation.
Permission is hereby granted for the distribution of this firmware data
in hexadecimal or equivalent format, provided this copyright notice is
diff --git a/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex
deleted file mode 100644
index 1b53582..0000000
--- a/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex
+++ /dev/null
@@ -1,9483 +0,0 @@
-:1000000000003BB0000000680000070C00003C202E
-:1000100000001AF8000043300000007C00005E3051
-:1000200000007A2C00005EB0000000B00000D8E0B4
-:10003000000080200000D99800000088000159C00D
-:100040000000398800015A5000000090000193E040
-:100050000000ABFC0001947800000FFC0002407827
-:100060000000000400025078020400480000000F65
-:100070000204005400000045020400580000000083
-:100080000204005C0000000602040070000000048E
-:1000900002040078000000000204007C1217000037
-:1000A00002040080221700000204008432170000BE
-:1000B00006040088000000050204009C12150000E0
-:1000C000020400A022150000020400A43215000062
-:1000D000060400A800000004020400B8021000009A
-:1000E000020400BC00100000020400C01010000058
-:1000F000020400C420100000020400C830100000F8
-:10010000060400CC00000004020400DC0010000023
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000060400EC00000004A1
-:100130000104012400000000010401280000000067
-:100140000104012C00000000010401300000000047
-:1001500002040004000000FF02040008000000FF89
-:100160000204000C000000FF02040010000000FF69
-:1001700002040014000000FF02040018000000FF49
-:100180000204001C000000FF02040020000000FF29
-:10019000020400240000003E0204002800000000C9
-:1001A0000204002C0000003F020400300000003F69
-:1001B000020400340000003F020400380000000088
-:1001C0000204003C0000003F020400400000003F29
-:1001D000020400440000003F020420080000021155
-:1001E0000204200C0000020002042010000002049F
-:1001F00002042014000002190204201C0000FFFF6A
-:10020000020420200000FFFF020420240000FFFF62
-:10021000020420280000FFFF0604203800000080B0
-:100220000204223807FFFFFF0204223C0000003FC7
-:100230000204224007FFFFFF020422440000000FD7
-:1002400001042248000000000104224C00000000CC
-:1002500001042250000000000104225400000000AC
-:1002600001042258000000000104225C000000008C
-:10027000010422600000000001042264000000006C
-:1002800001042268000000000104226C000000004C
-:10029000010422700000000001042274000000002C
-:1002A00001042278000000000104227C000000000C
-:1002B000020424BC000000010C042000000003E83C
-:1002C0000A042000000000010B0420000000000AC6
-:1002D0000605400000000D0002050044000000205B
-:1002E00002050048000000320205009002150020BF
-:1002F000020500940215002002050098000000305D
-:100300000205009C08100000020500A00000003358
-:10031000020500A400000030020500A80000003122
-:10032000020500AC00000002020500B0000000055C
-:10033000020500B400000006020500B8000000023B
-:10034000020500BC00000002020500C00000000021
-:10035000020500C400000005020500C800000002FC
-:10036000020500CC00000002020500D000000002DF
-:10037000020500D400000001020501140000000184
-:100380000205011C0000000102050120000000021E
-:1003900002050204000000010205020C00000040FA
-:1003A00002050210000000400205021C00000020AF
-:1003B00002050220000000130205022400000020B4
-:1003C000060502400000000A04050280002000002B
-:1003D000020500500000000702050054000000075D
-:1003E00002050058000000000205005C0000000843
-:1003F0000605006000000004020500D800000006A9
-:10040000020500E00000000D020500E40000002DE0
-:10041000020500E800000000020500EC00000020DA
-:10042000020500F000000000020500F400000020BA
-:10043000020500F800000000020500FC000000209A
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C0000406100002000020020600DC000000010B
-:1004D000010600D80000000004060200000302200C
-:1004E000020600DC0000000002060068000000B800
-:1004F0000206007800000114010600B800000000A8
-:10050000010600C8000000000206006C000000B8F0
-:100510000206007C00000114010600BC000000007F
-:10052000010600CC0000000007180400007B00005A
-:100530000818076000140223071C00002A040000AA
-:10054000071C800032110A82071D00001E0C1707CD
-:10055000081D4550575602250118000000000000F4
-:10056000011800040000000001180008000000004D
-:100570000118000C0000000001180010000000002D
-:100580000118001400000000021800200000000103
-:1005900002180024000000020218002800000003D6
-:1005A0000218002C000000000218003000000004B7
-:1005B000021800340000000102180038000000009A
-:1005C0000218003C00000001021800400000000476
-:1005D000021800440000000002180048000000015A
-:1005E0000218004C00000003021800500000000038
-:1005F0000218005400000001021800580000000416
-:100600000218005C000000000218006000000001F9
-:1006100002180064000000030218006800000000D7
-:100620000218006C000000010218007000000004B5
-:100630000218007400000000021800780000000496
-:100640000218007C00000003061800800000000271
-:10065000021800A400003FFF021800A8000003FFDA
-:1006600002180224000000000218023400000000FA
-:100670000218024C00000000021802E4000000FF13
-:100680000618100000000400021B8BC000000001CF
-:10069000021B800000000034021B80400000001894
-:1006A000021B80800000000C021B80C000000020A4
-:1006B0000C1B83000007A1200A1B830000000138E7
-:1006C0000B1B8300000013880A1B834000000000FE
-:1006D0000C1B8340000001F40B1B8340000000054D
-:1006E000021B83800007A120021B83C0000001F4CD
-:1006F000061A100000000273041A19CC0001022728
-:10070000061A2008000000C8061A20000000000297
-:10071000041A499800040228061A2E280000000234
-:10072000061A2E2000000002061A0800000000022F
-:10073000061A080800000004061A08180000000243
-:10074000041A08B00002022C061A2FD0000000067E
-:10075000041A2FE80002022E041A2FC000040230EF
-:10076000041A300000010234061A300400000003AD
-:10077000041A301000010235061A3014000000037C
-:10078000041A302000010236061A3024000000034B
-:10079000041A303000010237061A3034000000031A
-:1007A000041A304000010238061A304400000003E9
-:1007B000041A305000010239061A305400000003B8
-:1007C000041A30600001023A061A30640000000387
-:1007D000041A30700001023B061A30740000000356
-:1007E000041A30800001023C061A30840000000325
-:1007F000041A30900001023D061A309400000003F4
-:10080000041A30A00001023E061A30A400000003C2
-:10081000041A30B00001023F061A30B40000000391
-:10082000041A30C000010240061A30C40000000360
-:10083000041A30D000010241061A30D4000000032F
-:10084000041A30E000010242061A30E400000003FE
-:10085000041A30F000010243061A30F400000003CD
-:10086000041A310000010244061A3104000000039A
-:10087000041A311000010245061A31140000000369
-:10088000041A312000010246061A31240000000338
-:10089000041A313000010247061A31340000000307
-:1008A000041A314000010248061A314400000003D6
-:1008B000041A315000010249061A315400000003A5
-:1008C000041A31600001024A061A31640000000374
-:1008D000041A31700001024B061A31740000000343
-:1008E000041A31800001024C061A31840000000312
-:1008F000041A31900001024D061A319400000003E1
-:10090000041A31A00001024E061A31A400000003AF
-:10091000041A31B00001024F061A31B4000000037E
-:10092000041A31C000010250061A31C4000000034D
-:10093000041A31D000010251061A31D4000000031C
-:10094000041A31E000010252061A31E400000003EB
-:10095000041A31F000010253061A31F400000003BA
-:10096000041A320000010254061A32040000000387
-:10097000041A321000010255061A32140000000356
-:10098000041A322000010256061A32240000000325
-:10099000041A323000010257061A323400000003F4
-:1009A000041A324000010258061A324400000003C3
-:1009B000041A325000010259061A32540000000392
-:1009C000041A32600001025A061A32640000000361
-:1009D000041A32700001025B061A32740000000330
-:1009E000041A32800001025C061A328400000003FF
-:1009F000041A32900001025D061A329400000003CE
-:100A0000041A32A00001025E061A32A4000000039C
-:100A1000041A32B00001025F061A32B4000000036B
-:100A2000041A32C000010260061A32C4000000033A
-:100A3000041A32D000010261061A32D40000000309
-:100A4000041A32E000010262061A32E400000003D8
-:100A5000041A32F000010263061A32F400000003A7
-:100A6000041A330000010264061A33040000000374
-:100A7000041A331000010265061A33140000000343
-:100A8000041A332000010266061A33240000000312
-:100A9000041A333000010267061A333400000003E1
-:100AA000041A334000010268061A334400000003B0
-:100AB000041A335000010269061A3354000000037F
-:100AC000041A33600001026A061A3364000000034E
-:100AD000041A33700001026B061A3374000000031D
-:100AE000041A33800001026C061A338400000003EC
-:100AF000041A33900001026D061A339400000003BB
-:100B0000041A33A00001026E061A33A40000000389
-:100B1000041A33B00001026F061A33B40000000358
-:100B2000041A33C000010270061A33C40000000327
-:100B3000041A33D000010271061A33D400000003F6
-:100B4000041A33E000010272061A33E400000003C5
-:100B5000041A33F000010273061A33F40000000394
-:100B6000041A340000010274061A34040000000361
-:100B7000041A341000010275061A34140000000330
-:100B8000041A342000010276061A342400000003FF
-:100B9000041A343000010277061A343400000003CE
-:100BA000041A344000010278061A3444000000039D
-:100BB000041A345000010279061A3454000000036C
-:100BC000041A34600001027A061A3464000000033B
-:100BD000041A34700001027B061A3474000000030A
-:100BE000041A34800001027C061A348400000003D9
-:100BF000041A34900001027D061A349400000003A8
-:100C0000041A34A00001027E061A34A40000000376
-:100C1000041A34B00001027F061A34B40000000345
-:100C2000041A34C000010280061A34C40000000314
-:100C3000041A34D000010281061A34D400000003E3
-:100C4000041A34E000010282061A34E400000003B2
-:100C5000041A34F000010283061A34F40000000381
-:100C6000041A350000010284061A3504000000034E
-:100C7000041A351000010285061A3514000000031D
-:100C8000041A352000010286061A352400000003EC
-:100C9000041A353000010287061A353400000003BB
-:100CA000041A354000010288061A3544000000038A
-:100CB000041A355000010289061A35540000000359
-:100CC000041A35600001028A061A35640000000328
-:100CD000041A35700001028B061A357400000003F7
-:100CE000041A35800001028C061A358400000003C6
-:100CF000041A35900001028D061A35940000000395
-:100D0000041A35A00001028E061A35A40000000363
-:100D1000041A35B00001028F061A35B40000000332
-:100D2000041A35C000010290061A35C40000000301
-:100D3000041A35D000010291061A35D400000003D0
-:100D4000041A35E000010292061A35E4000000039F
-:100D5000041A35F000010293061A35F4000000036E
-:100D6000041A360000010294061A3604000000033B
-:100D7000041A361000010295061A3614000000030A
-:100D8000041A362000010296061A362400000003D9
-:100D9000041A363000010297061A363400000003A8
-:100DA000041A364000010298061A36440000000377
-:100DB000041A365000010299061A36540000000346
-:100DC000041A36600001029A061A36640000000315
-:100DD000041A36700001029B061A367400000003E4
-:100DE000041A36800001029C061A368400000003B3
-:100DF000041A36900001029D061A36940000000382
-:100E0000041A36A00001029E061A36A40000000350
-:100E1000041A36B00001029F061A36B4000000031F
-:100E2000041A36C0000102A0061A36C400000003EE
-:100E3000041A36D0000102A1061A36D400000003BD
-:100E4000041A36E0000102A2061A36E4000000038C
-:100E5000041A36F0000102A3061A36F4000000035B
-:100E6000041A3700000102A4061A37040000000328
-:100E7000041A3710000102A5061A371400000003F7
-:100E8000041A3720000102A6061A372400000003C6
-:100E9000041A3730000102A7061A37340000000395
-:100EA000041A3740000102A8061A37440000000364
-:100EB000041A3750000102A9061A37540000000333
-:100EC000041A3760000102AA061A37640000000302
-:100ED000041A3770000102AB061A377400000003D1
-:100EE000041A3780000102AC061A378400000003A0
-:100EF000041A3790000102AD061A3794000000036F
-:100F0000041A37A0000102AE061A37A4000000033D
-:100F1000041A37B0000102AF061A37B4000000030C
-:100F2000041A37C0000102B0061A37C400000003DB
-:100F3000041A37D0000102B1061A37D400000003AA
-:100F4000041A37E0000102B2061A37E40000000379
-:100F5000041A37F0000102B3061A37F40000000348
-:100F6000041A3800000102B4061A38040000000315
-:100F7000041A3810000102B5061A381400000003E4
-:100F8000041A3820000102B6061A382400000003B3
-:100F9000041A3830000102B7061A38340000000382
-:100FA000041A3840000102B8061A38440000000351
-:100FB000041A3850000102B9061A38540000000320
-:100FC000041A3860000102BA061A386400000003EF
-:100FD000041A3870000102BB061A387400000003BE
-:100FE000041A3880000102BC061A3884000000038D
-:100FF000041A3890000102BD061A3894000000035C
-:10100000041A38A0000102BE061A38A4000000032A
-:10101000041A38B0000102BF061A38B400000003F9
-:10102000041A38C0000102C0061A38C400000003C8
-:10103000041A38D0000102C1061A38D40000000397
-:10104000041A38E0000102C2061A38E40000000366
-:10105000041A38F0000102C3061A38F40000000335
-:10106000041A3900000102C4061A39040000000302
-:10107000041A3910000102C5061A391400000003D1
-:10108000041A3920000102C6061A392400000003A0
-:10109000041A3930000102C7061A3934000000036F
-:1010A000041A3940000102C8061A3944000000033E
-:1010B000041A3950000102C9061A3954000000030D
-:1010C000041A3960000102CA061A396400000003DC
-:1010D000041A3970000102CB061A397400000003AB
-:1010E000041A3980000102CC061A3984000000037A
-:1010F000041A3990000102CD061A39940000000349
-:10110000041A39A0000102CE061A39A40000000317
-:10111000041A39B0000102CF061A39B400000003E6
-:10112000041A39C0000102D0061A39C400000003B5
-:10113000041A39D0000102D1061A39D40000000384
-:10114000041A39E0000102D2061A39E40000000353
-:10115000041A39F0000102D3061A39F40000000322
-:10116000041A3A00000102D4061A3A0400000003EF
-:10117000041A3A10000102D5061A3A1400000003BE
-:10118000041A3A20000102D6061A3A24000000038D
-:10119000041A3A30000102D7061A3A34000000035C
-:1011A000041A3A40000102D8061A3A44000000032B
-:1011B000041A3A50000102D9061A3A5400000003FA
-:1011C000041A3A60000102DA061A3A6400000003C9
-:1011D000041A3A70000102DB061A3A740000000398
-:1011E000041A3A80000102DC061A3A840000000367
-:1011F000041A3A90000102DD061A3A940000000336
-:10120000041A3AA0000102DE061A3AA40000000304
-:10121000041A3AB0000102DF061A3AB400000003D3
-:10122000041A3AC0000102E0061A3AC400000003A2
-:10123000041A3AD0000102E1061A3AD40000000371
-:10124000041A3AE0000102E2061A3AE40000000340
-:10125000041A3AF0000102E3061A3AF4000000030F
-:10126000041A3B00000102E4061A3B0400000003DC
-:10127000041A3B10000102E5061A3B1400000003AB
-:10128000041A3B20000102E6061A3B24000000037A
-:10129000041A3B30000102E7061A3B340000000349
-:1012A000041A3B40000102E8061A3B440000000318
-:1012B000041A3B50000102E9061A3B5400000003E7
-:1012C000041A3B60000102EA061A3B6400000003B6
-:1012D000041A3B70000102EB061A3B740000000385
-:1012E000041A3B80000102EC061A3B840000000354
-:1012F000041A3B90000102ED061A3B940000000323
-:10130000041A3BA0000102EE061A3BA400000003F1
-:10131000041A3BB0000102EF061A3BB400000003C0
-:10132000041A3BC0000102F0061A3BC4000000038F
-:10133000041A3BD0000102F1061A3BD4000000035E
-:10134000041A3BE0000102F2061A3BE4000000032D
-:10135000041A3BF0000102F3061A3BF400000003FC
-:10136000041A3C00000102F4061A3C0400000003C9
-:10137000041A3C10000102F5061A3C140000000398
-:10138000041A3C20000102F6061A3C240000000367
-:10139000041A3C30000102F7061A3C340000000336
-:1013A000041A3C40000102F8061A3C440000000305
-:1013B000041A3C50000102F9061A3C5400000003D4
-:1013C000041A3C60000102FA061A3C6400000003A3
-:1013D000041A3C70000102FB061A3C740000000372
-:1013E000041A3C80000102FC061A3C840000000341
-:1013F000041A3C90000102FD061A3C940000000310
-:10140000041A3CA0000102FE061A3CA400000003DE
-:10141000041A3CB0000102FF061A3CB400000003AD
-:10142000041A3CC000010300061A3CC4000000037B
-:10143000041A3CD000010301061A3CD4000000034A
-:10144000041A3CE000010302061A3CE40000000319
-:10145000041A3CF000010303061A3CF400000003E8
-:10146000041A3D0000010304061A3D0400000003B5
-:10147000041A3D1000010305061A3D140000000384
-:10148000041A3D2000010306061A3D240000000353
-:10149000041A3D3000010307061A3D340000000322
-:1014A000041A3D4000010308061A3D4400000003F1
-:1014B000041A3D5000010309061A3D5400000003C0
-:1014C000041A3D600001030A061A3D64000000038F
-:1014D000041A3D700001030B061A3D74000000035E
-:1014E000041A3D800001030C061A3D84000000032D
-:1014F000041A3D900001030D061A3D9400000003FC
-:10150000041A3DA00001030E061A3DA400000003CA
-:10151000041A3DB00001030F061A3DB40000000399
-:10152000041A3DC000010310061A3DC40000000368
-:10153000041A3DD000010311061A3DD40000000337
-:10154000041A3DE000010312061A3DE40000000306
-:10155000041A3DF000010313061A3DF400000003D5
-:10156000041A3E0000010314061A3E0400000003A2
-:10157000041A3E1000010315061A3E140000000371
-:10158000041A3E2000010316061A3E240000000340
-:10159000041A3E3000010317061A3E34000000030F
-:1015A000041A3E4000010318061A3E4400000003DE
-:1015B000041A3E5000010319061A3E5400000003AD
-:1015C000041A3E600001031A061A3E64000000037C
-:1015D000041A3E700001031B061A3E74000000034B
-:1015E000041A3E800001031C061A3E84000000031A
-:1015F000041A3E900001031D061A3E9400000003E9
-:10160000041A3EA00001031E061A3EA400000003B7
-:10161000041A3EB00001031F061A3EB40000000386
-:10162000041A3EC000010320061A3EC40000000355
-:10163000041A3ED000010321061A3ED40000000324
-:10164000041A3EE000010322061A3EE400000003F3
-:10165000041A3EF000010323061A3EF400000003C2
-:10166000041A3F0000010324061A3F04000000038F
-:10167000041A3F1000010325061A3F14000000035E
-:10168000041A3F2000010326061A3F24000000032D
-:10169000041A3F3000010327061A3F3400000003FC
-:1016A000041A3F4000010328061A3F4400000003CB
-:1016B000041A3F5000010329061A3F54000000039A
-:1016C000041A3F600001032A061A3F640000000369
-:1016D000041A3F700001032B061A3F740000000338
-:1016E000041A3F800001032C061A3F840000000307
-:1016F000041A3F900001032D061A3F9400000003D6
-:10170000041A3FA00001032E061A3FA400000003A4
-:10171000041A3FB00001032F061A3FB40000000373
-:10172000041A3FC000010330061A3FC40000000342
-:10173000041A3FD000010331061A3FD40000000311
-:10174000041A3FE000010332061A3FE400000007DC
-:10175000041A4CB000080333061A400000000124AC
-:10176000021A492000000000061A2500000000109F
-:10177000061A258000000012061A09C00000004861
-:10178000061A080000000002061A082000000012D5
-:10179000041A2FB00002033B041A4CF00002033D70
-:1017A000061A500000000004061A449000000124AC
-:1017B000021A492400000000061A2540000000100B
-:1017C000061A25C800000012061A0AE000000048A8
-:1017D000061A081000000002061A0868000000122D
-:1017E000041A2FB80002033F041A4CF80002034108
-:1017F000061A5010000000040200A468000AFFDC72
-:101800000200A280000000010200A294071D29111D
-:101810000200A298000000000200A29C009C042488
-:101820000200A2A0000000000200A2A40000020921
-:101830000200A4FCFF000000020100B4000000014F
-:10184000020100B800000001020100DC00000001FC
-:10185000020101000000000102010104000000017A
-:101860000201007C0030000002010084000000281A
-:101870000201008C000000000201013000000004A1
-:101880000201025C000000010201032800000000C8
-:101890000201055400000030020100C400000001F4
-:1018A000020100CC00000001020100F8000000016C
-:1018B000020100F000000001020100800030000081
-:1018C00002010088000000280201009000000000D2
-:1018D0000201013400000004020102DC00000001EA
-:1018E0000201032C0000000002010564000000302A
-:1018F000020100C800000001020100D00000000148
-:10190000020100FC00000001020100F400000001DF
-:10191000020C100000000028020C200800000A1130
-:10192000020C200C00000A00020C201000000A0427
-:10193000020C201C0000FFFF020C20200000FFFF13
-:10194000020C20240000FFFF020C20280000FFFFF3
-:10195000020C203800000020020C203C0000002176
-:10196000020C204000000022020C20440000002352
-:10197000020C204800000024020C204C000000252E
-:10198000020C205000000026020C2054000000270A
-:10199000020C205800000028020C205C00000029E6
-:1019A000020C20600000002A020C20640000002BC2
-:1019B000020C20680000002C020C206C0000002D9E
-:1019C000020C20700000002E020C20740000002F7A
-:1019D000020C207800000010060C207C0000004F54
-:1019E000020C21B800000001020C21BC0000000123
-:1019F000020C21C000000001020C21C40000000103
-:101A0000020C21C800000001020C21CC00000001E2
-:101A1000020C21D000000001020C21D400000001C2
-:101A2000020C21D800000001020C21DC00000001A2
-:101A3000020C21E000000001020C21E40000000182
-:101A4000020C21E800000001020C21EC0000000162
-:101A5000020C21F000000001020C21F40000000142
-:101A6000020C21F800000001060C21FC0000000F10
-:101A7000020C223807FFFFFF020C223C0000003F4F
-:101A8000020C224007FFFFFF020C22440000000F5F
-:101A9000010C224800000000010C224C0000000054
-:101AA000010C225000000000010C22540000000034
-:101AB000010C225800000000010C225C0000000014
-:101AC000010C226000000000010C226400000000F4
-:101AD000010C226800000000010C226C00000000D4
-:101AE000010C227000000000010C227400000000B4
-:101AF000010C227800000000010C227C0000000094
-:101B0000020C24BC000000010C0C2000000003E8C3
-:101B10000A0C2000000000010B0C20000000000A4D
-:101B2000020C400800000562020C400C0000055148
-:101B3000020C401000000555020C40140000057214
-:101B4000020C401C0000FFFF020C40200000FFFFC1
-:101B5000020C40240000FFFF020C40280000FFFFA1
-:101B6000020C403800000046020C403C0000000C13
-:101B7000060C40400000005E020C41B8000000016D
-:101B8000060C41BC0000001F020C423807FFFFFF9B
-:101B9000020C423C0000003F020C424007FFFFFFE6
-:101BA000020C42440000000F010C424800000000FB
-:101BB000010C424C00000000010C425000000000EB
-:101BC000010C425400000000010C425800000000CB
-:101BD000010C425C00000000010C426000000000AB
-:101BE000010C426400000000010C4268000000008B
-:101BF000010C426C00000000010C4270000000006B
-:101C0000010C427400000000010C4278000000004A
-:101C1000010C427C00000000010C4280000000002A
-:101C2000020C44C0000000010C0C4000000003E85E
-:101C30000A0C4000000000010B0C40000000000AEC
-:101C4000060D400000000A00020D004400000032B2
-:101C5000020D008C02150020020D009002150020DC
-:101C6000020D009408100000020D009800000033DF
-:101C7000020D009C00000002020D00A00000000008
-:101C8000020D00A400000005020D00A800000005E0
-:101C9000060D00AC00000002020D00B400000002BE
-:101CA000020D00B800000003020D00BC000000029D
-:101CB000020D00C000000001020D00C8000000027B
-:101CC000020D00CC00000002020D015C00000001CA
-:101CD000020D016400000001020D01680000000215
-:101CE000020D020400000001020D020C00000020A1
-:101CF000020D021000000040020D0214000000401E
-:101D0000020D022000000003020D02240000001852
-:101D1000060D028000000012040D030000180343AA
-:101D2000060D03600000000C020D004C00000001D5
-:101D3000020D005000000002020D005400000000DF
-:101D4000020D005800000008060D005C00000004B1
-:101D5000020D00C400000004020D0114000000097F
-:101D6000020D011800000029020D011C0000000AEC
-:101D7000020D01200000002A020D012400000000D5
-:101D8000020D012800000020020D012C00000000BF
-:101D9000020D013000000020020D0134000000009F
-:101DA000020D013800000020020D013C000000007F
-:101DB000020D014000000020020D0144000000005F
-:101DC000020D014800000020020D00040000000187
-:101DD000020D000800000001020D000C00000001CF
-:101DE000020D001000000001020D001400000001AF
-:101DF000020D001800000001020D001C000000018F
-:101E0000020D002000000001020D0024000000016E
-:101E1000020D002800000001020D002C000000014E
-:101E2000020D003000000001020D0034000000012E
-:101E3000020D003800000001020D003C000000010E
-:101E4000060E200000000800020E004C00000032C8
-:101E5000020E009402150020020E009802150020C8
-:101E6000020E009C00000030020E00A008100000CE
-:101E7000020E00A400000033020E00A80000003093
-:101E8000020E00AC00000031020E00B000000002A3
-:101E9000020E00B400000004020E00B800000000B2
-:101EA000020E00BC00000002020E00C00000000292
-:101EB000020E00C400000000020E00C80000000274
-:101EC000020E00CC00000007020E00D0000000024D
-:101ED000020E00D400000002020E00D80000000133
-:101EE000020E014400000001020E014C000000013E
-:101EF000020E015000000002020E02040000000168
-:101F0000020E020C00000040020E02100000004011
-:101F1000020E021C00000004020E0220000000203D
-:101F2000020E02240000000E020E02280000001B18
-:101F3000060E030000000012040E0280001B035B6B
-:101F4000060E02EC00000005020E00540000000C1A
-:101F5000020E00580000000C020E005C00000000A1
-:101F6000020E006000000010060E00640000000475
-:101F7000020E00DC00000003020E01100000000F42
-:101F8000020E01140000002F020E011800000000D4
-:101F9000020E011C00000020020E000400000001DF
-:101FA000020E000800000001020E000C00000001FB
-:101FB000020E001000000001020E001400000001DB
-:101FC000020E001800000001020E001C00000001BB
-:101FD000020E002000000001020E0024000000019B
-:101FE000020E002800000001020E002C000000017B
-:101FF000020E003000000001020E0034000000015B
-:10200000020E003800000001020E003C000000013A
-:10201000020E004000000001020E0044000000011A
-:102020000730040000AF0000083007680013037693
-:1020300007340000331C00000734800032780CC8DD
-:10204000073500001A801967083539B058CA037877
-:10205000013000000000000001300004000000001A
-:1020600001300008000000000130000C00000000FA
-:1020700001300010000000000130001400000000DA
-:1020800002300020000000010230002400000002A5
-:1020900002300028000000030230002C0000000085
-:1020A0000230003000000004023000340000000163
-:1020B00002300038000000000230003C0000000147
-:1020C0000230004000000004023000440000000024
-:1020D00002300048000000010230004C0000000304
-:1020E00002300050000000000230005400000001E7
-:1020F00002300058000000040230005C00000000C4
-:1021000002300060000000010230006400000003A3
-:1021100002300068000000000230006C0000000186
-:102120000230007000000004023000740000000063
-:1021300002300078000000040230007C0000000340
-:102140000630008000000002023000A400003FFFC3
-:10215000023000A8000003FF02300224000000004B
-:1021600002300234000000000230024C0000000087
-:10217000023002E40000FFFF0630200000000800EB
-:1021800002338BC000000001023380000000001AFF
-:10219000023380400000004E0233808000000010B7
-:1021A000023380C0000000200C3383000007A12010
-:1021B0000A338300000001380B33830000001388CA
-:1021C0000A338340000000000C338340000001F418
-:1021D0000B33834000000005023383800007A120F9
-:1021E000023383C0000001F406322A88000000C2D6
-:1021F00006322008000000C806322000000000025D
-:10220000063223E80000004004322E580004037A0E
-:10221000063250A000000004063250B80000000250
-:102220000632508000000006043250980002037EFF
-:10223000063250000000002006323000000004008A
-:1022400006321C0000000004043218300002038033
-:10225000063224E8000000B402322DB00000000075
-:1022600006324000000000B40632300000000020BA
-:10227000063231000000002006323200000000204B
-:102280000632330000000020063234000000002037
-:102290000632350000000020063236000000002023
-:1022A000063237000000002006323800000000200F
-:1022B000063239000000002006323A0000000020FB
-:1022C00006323B000000002006323C0000000020E7
-:1022D00006323D000000002006323E0000000020D3
-:1022E00006323F000000002006321C1000000002F1
-:1022F000063245A000000024063227B8000000B4D2
-:1023000002322DB400000000063242D0000000B4BA
-:1023100006323080000000200632318000000020AC
-:102320000632328000000020063233800000002098
-:102330000632348000000020063235800000002084
-:102340000632368000000020063237800000002070
-:10235000063238800000002006323980000000205C
-:1023600006323A800000002006323B800000002048
-:1023700006323C800000002006323D800000002034
-:1023800006323E800000002006323F800000002020
-:1023900006321C20000000020632463000000024F5
-:1023A0000720040000870000082007800010038237
-:1023B000072400003165000007248000081D0C5A26
-:1023C00008248EB06C9003840120000000000000FF
-:1023D00001200004000000000120000800000000AF
-:1023E0000120000C0000000001200010000000008F
-:1023F0000120001400000000022000200000000165
-:102400000220002400000002022000280000000337
-:102410000220002C00000000022000300000000418
-:1024200002200034000000010220003800000000FB
-:102430000220003C000000010220004000000004D7
-:1024400002200044000000000220004800000001BB
-:102450000220004C00000003022000500000000099
-:102460000220005400000001022000580000000477
-:102470000220005C0000000002200060000000015B
-:102480000220006400000003022000680000000039
-:102490000220006C00000001022000700000000417
-:1024A00002200074000000000220007800000004F8
-:1024B0000220007C000000030620008000000002D3
-:1024C000022000A400003FFF022000A8000003FF3C
-:1024D000022002240000000002200234000000005C
-:1024E0000220024C00000000022002E40000FFFF76
-:1024F000062020000000080002238BC0000000011D
-:10250000022380000000001002238040000000121F
-:102510000223808000000030022380C00000000EF3
-:102520000C2383000007A1200A2383000000013848
-:102530000B238300000013880A238340000000005F
-:102540000C238340000001F40B23834000000005AE
-:10255000022383800007A120022383C0000001F42E
-:10256000062250000000004206222008000000C899
-:10257000062220000000000206224000000000C6E3
-:1025800004224318000503860622432C0000000B9A
-:10259000042243580005038B0622436C0000000B05
-:1025A0000422439800050390062243AC0000000B70
-:1025B000042243D800050395062243EC0000000BDB
-:1025C000042244180005039A0622442C0000000B44
-:1025D000042244580005039F0622446C0000000BAF
-:1025E00004224498000503A4062244AC0000000B1A
-:1025F000042244D8000503A9062244EC0000000B85
-:1026000004224518000503AE0622452C0000000BED
-:1026100004224558000503B30622456C0000000B58
-:1026200004224598000503B8062245AC0000000BC3
-:10263000042245D8000503BD062245EC0000000B2E
-:1026400004224618000503C20622462C0000000B97
-:1026500004224658000503C70622466C0000000B02
-:1026600004224698000503CC062246AC0000000B6D
-:10267000042246D8000503D1062246EC0000000BD8
-:1026800004224718000503D60622472C0000000B41
-:1026900004224758000503DB0622476C0000000BAC
-:1026A00004224798000503E0062247AC0000000B17
-:1026B000042247D8000503E5062247EC0000000B82
-:1026C00004224818000503EA0622482C0000000BEB
-:1026D00004224858000503EF0622486C0000000B56
-:1026E00004224898000503F4062248AC0000000BC1
-:1026F000042248D8000503F9062248EC0000000B2C
-:1027000004224918000503FE0622492C0000000B94
-:1027100004224958000504030622496C0000000BFE
-:102720000422499800050408062249AC0000000B69
-:10273000042249D80005040D062249EC0000000BD4
-:1027400004224A180005041206224A2C0000000B3D
-:1027500004224A580005041706224A6C0000000BA8
-:1027600004224A980005041C06224AAC0000000B13
-:1027700004224AD80005042106224AEC0000000584
-:1027800006224B000000001704224B5C00010426C7
-:1027900006224B600000000304224B6C000104275A
-:1027A000062238000000004006223000000002002F
-:1027B000042251C00004042806221000000000C0BA
-:1027C000062215C00000024004221EC80008042C86
-:1027D0000622390000000008022251180000000003
-:1027E000062251D00000000606221300000000025D
-:1027F00006221410000000300622392000000008D4
-:102800000222511C00000000062251E800000006D0
-:102810000622130800000002062214D00000003037
-:102820000216100000000028021700080000000235
-:102830000217002C000000030217003C00000004F7
-:1028400002170044000000000217004800000002C8
-:102850000217004C0000009002170050000000908A
-:102860000217005400800090021700580810000062
-:10287000021700600000008A021700640000008058
-:1028800002170068000000810217006C0000008041
-:10289000021700700000000602170078000007D041
-:1028A0000217007C0000076C02170038007C10043F
-:1028B000021700040000000F06164024000000026A
-:1028C000021640700000001C0216420800000001C1
-:1028D0000216421000000001021642200000000112
-:1028E00002164228000000010216423000000001DA
-:1028F000021642380000000102164260000000018A
-:102900000C16401C0003D0900A16401C0000009CCE
-:102910000B16401C000009C40216403000000008DD
-:10292000021640340000000C02164038000000106F
-:102930000216404400000020021640000000000182
-:10294000021640D8000000010216400800000001F5
-:102950000216400C000000010216401000000001A9
-:10296000021642400000000002164248000000002B
-:1029700006164270000000020216425000000000DD
-:1029800002164258000000000616428000000002B5
-:1029900002166008000006140216600C0000060013
-:1029A00002166010000006040216601C0000FFFF03
-:1029B000021660200000FFFF021660240000FFFFE7
-:1029C000021660280000FFFF021660380000002099
-:1029D0000216603C00000020061660400000000265
-:1029E00002166048000000230216604C000000241C
-:1029F00002166050000000250216605400000026F8
-:102A000002166058000000270216605C00000029D2
-:102A1000021660600000002A021660640000002BAD
-:102A2000021660680000002C0216606C0000002D89
-:102A30000616607000000012021660B80000000167
-:102A4000021660BC00000001061660C00000003ED7
-:102A5000021661B800000001061661BC0000001FEC
-:102A60000216623807FFFFFF0216623C0000003FBB
-:102A70000216624007FFFFFF021662440000000FCB
-:102A800001166248000000000116624C00000000C0
-:102A900001166250000000000116625400000000A0
-:102AA00001166258000000000116625C0000000080
-:102AB0000116626000000000011662640000000060
-:102AC00001166268000000000116626C0000000040
-:102AD0000116627000000000011662740000000020
-:102AE00001166278000000000116627C0000000000
-:102AF000021664BC000000010C166000000003E830
-:102B00000A166000000000010B1660000000000AB9
-:102B100002168040000000060216804400000005F6
-:102B2000021680480000000A0216804C00000005D2
-:102B30000216805400000002021680CC000000043F
-:102B4000021680D000000004021680D400000004A9
-:102B5000021680D800000004021680DC0000000489
-:102B6000021680E000000004021680E40000000469
-:102B7000021680E800000004021688040000000429
-:102B8000021680300000007C021680340000003DF8
-:102B9000021680380000003F0216803C0000009CB6
-:102BA000021680F000000007061680F40000000501
-:102BB0000216880C010101010216810800000000C4
-:102BC0000216810C000000040216811000000004AF
-:102BD0000216811400000002021688100801200469
-:102BE00002168118000000050216811C0000000575
-:102BF0000216812000000005021681240000000555
-:102C00000216882C200810010216812800000008F6
-:102C10000216812C00000006021681300000000719
-:102C200002168134000000000216883001010120E4
-:102C300006168138000000040216883401010101E3
-:102C400006168148000000040216883801010101BF
-:102C500006168158000000040216883C010101019B
-:102C6000061681680000000302168174000000014E
-:102C7000021688400101010102168178000000015E
-:102C80000216817C00000001021681800000000114
-:102C9000021681840000000102168844010101012E
-:102CA00002168188000000010216818C00000004D9
-:102CB00002168190000000040216819400000002B8
-:102CC00002168848080120040216819800000005B9
-:102CD0000216819C00000005021681A0000000057C
-:102CE000021681A4000000050216881420081001B5
-:102CF000021681A800000008021681AC0000000640
-:102D0000021681B000000007021681B40000000125
-:102D10000216881801010120021681B80000000186
-:102D2000021681BC00000001021681C000000001F3
-:102D3000021681C4000000010216881C0101010175
-:102D4000021681C800000001021681CC00000001BB
-:102D5000021681D000000001021681D4000000019B
-:102D60000216882001010101021681D8000000012D
-:102D7000021681DC00000001021681E00000000163
-:102D8000021681E4000000010216882401010101FD
-:102D9000021681E800000001021681EC000000012B
-:102DA000021681F0000000010216882801010101CD
-:102DB00002168240FFFF003F061682440000000218
-:102DC0000216824CFFFF003F0216825000000100F5
-:102DD000021682540000010006168258000000020C
-:102DE00002168260000000C002168264000000C06B
-:102DF0000216826800001E000216826C00001E008F
-:102E0000021682700000400002168274000040002A
-:102E100002168278000080000216827C000080008A
-:102E2000021682800000200002168284000020002A
-:102E30000616828800000007021682A40000000126
-:102E4000061682A80000000A021681F400000C0891
-:102E5000021681F800000040021681FC000001000B
-:102E600002168200000000200216820400000017F3
-:102E700002168208000000800216820C0000020088
-:102E8000021682100000000002168218FFFF01FFE8
-:102E900002168214FFFF01FF0216823C000000139D
-:102EA000021680900000013F021680600000014081
-:102EB00002168064000001400616806800000002CF
-:102EC00002168070000000C0061680740000000723
-:102ED0000216809C00000048021680A000000048F6
-:102EE000061680A400000002021680AC0000004814
-:102EF000061680B00000000702168238000080002D
-:102F000002168234000025E40216809400007FFF40
-:102F100002168220000000070216821C0000000733
-:102F2000021682280000000002168224FFFFFFFF25
-:102F300002168230000000000216822CFFFFFFFF05
-:102F4000021680EC000000FF0214000000000001E7
-:102F50000214000C000000010214004000000001F7
-:102F60000214004400007FFF0214000C0000000067
-:102F700002140000000000000214006C00000000B9
-:102F800002140004000000010214003000000001DF
-:102F900002140004000000000214005C00000000A5
-:102FA00002140008000000010214003400000001B7
-:102FB000021400080000000002140060000000007D
-:102FC00006028000000020000202005800000032CB
-:102FD000020200A003150020020200A40315002035
-:102FE000020200A801000030020200AC081000003C
-:102FF000020200B000000033020200B40000003002
-:10300000020200B800000031020200BC0000000310
-:10301000020200C000000006020200C4000000031B
-:10302000020200C800000003020200CC00000002FF
-:10303000020200D000000000020200D400000002E2
-:10304000020200DC00000000020200E000000006B6
-:10305000020200E400000004020200E80000000296
-:10306000020200EC00000002020200F00000000179
-:10307000020200FC00000006020201200000000025
-:103080000202013400000002020201B0000000014F
-:103090000202020C00000001020202140000000102
-:1030A00002020218000000020202040400000001F3
-:1030B0000202040C00000040020204100000004064
-:1030C0000202041C00000004020204200000002090
-:1030D0000202042400000002020204280000001F73
-:1030E00006020500000000120402048000200434DF
-:1030F000020200600000000F0202006400000007EE
-:1031000002020068000000000202006C0000000ED5
-:103110000602007000000004020200F40000000437
-:103120000202000400000001020200080000000189
-:103130000202000C00000001020200100000000169
-:103140000202001400000001020200180000000149
-:103150000202001C00000001020200200000000129
-:103160000202002400000001020200280000000109
-:103170000202002C000000010202003000000001E9
-:1031800002020034000000010202003800000001C9
-:103190000202003C000000010202004000000001A9
-:1031A0000202004400000001020200480000000189
-:1031B0000202004C00000001020200500000000169
-:1031C00002020108000000C802020118000000020B
-:1031D000020201C400000000020201CC0000000055
-:1031E000020201D400000002020201DC0000000221
-:1031F000020201E4000000FF020201EC000000FFF7
-:103200000202010C000000C80202011C00000002C2
-:10321000020201C800000000020201D0000000000C
-:10322000020201D800000002020201E000000002D8
-:10323000020201E8000000FF020201F0000000FFAE
-:1032400007280400008D00000828076800130454B4
-:10325000072C000034090000072C800038990D036A
-:10326000072D0000390C1B2A072D80000641296E0E
-:10327000082D8AB04EAA0456012800000000000064
-:1032800001280004000000000128000800000000E0
-:103290000128000C000000000128001000000000C0
-:1032A0000128001400000000022800200000000196
-:1032B0000228002400000002022800280000000369
-:1032C0000228002C0000000002280030000000044A
-:1032D000022800340000000102280038000000002D
-:1032E0000228003C00000001022800400000000409
-:1032F00002280044000000000228004800000001ED
-:103300000228004C000000030228005000000000CA
-:1033100002280054000000010228005800000004A8
-:103320000228005C0000000002280060000000018C
-:10333000022800640000000302280068000000006A
-:103340000228006C00000001022800700000000448
-:103350000228007400000000022800780000000429
-:103360000228007C00000003062800800000000204
-:10337000022800A400003FFF022800A8000003FF6D
-:10338000022802240000000002280234000000008D
-:103390000228024C00000000022802E40000FFFFA7
-:1033A0000628200000000800022B8BC0000000014E
-:1033B000022B800000000000022B8040000000185B
-:1033C000022B80800000000C022B80C000000066F1
-:1033D0000C2B83000007A1200A2B8300000001387A
-:1033E0000B2B8300000013880A2B83400000000091
-:1033F0000C2B8340000001F40B2B834000000005E0
-:10340000022B83800007A120022B83C0000001F45F
-:10341000062A3D4800000004042A3D5800020458D2
-:10342000062A3D6000000006062A30000000004821
-:10343000062A2008000000C8062A2000000000021A
-:10344000062A31280000008E062A33680000000397
-:10345000042A33740001045A062A3A780000000254
-:10346000042A3A800002045B042A3A700002045DD8
-:10347000042A3E280002045F042A3EB000040461CE
-:10348000042A250000020465062A25080000010020
-:10349000062A297000000004042A29600004046739
-:1034A000042A2F480002046B062A3378000000D853
-:1034B000022A3A3800000000062A3A88000000324A
-:1034C000042A3D880010046D062A502000000002E6
-:1034D000062A503000000002062A500000000002B8
-:1034E000062A501000000002022A50B80000000115
-:1034F000062A50480000000E042A3D780002047D90
-:10350000062A3C1800000026022A50400000000055
-:10351000062A36D8000000D8022A3A3C00000000F3
-:10352000062A3B5000000032042A3DC80010047FE8
-:10353000062A502800000002062A50380000000227
-:10354000062A500800000002062A50180000000257
-:10355000022A50BC00000001062A50800000000E24
-:10356000042A3D800002048F062A3CB00000002699
-:10357000022A504400000000021010080000000160
-:103580000210101000000264021010000003D000AE
-:10359000021010040000003D091018000200049100
-:1035A00009101100001006910610114000000008DB
-:1035B00009101160000806A1061011800000000229
-:1035C00009101188000606A9061011A000000018B5
-:1035D000021010100000000006102400000000E09F
-:1035E0000210201C0000000002102020000000013A
-:1035F000021020C0000000010210200400000001A1
-:10360000021020080000000109103C00000506AF70
-:1036100009103C20000506B409103800000506B961
-:1036200002104028000000100210404400003FFF3C
-:103630000210405800280000021040840084924A82
-:1036400006104C000000010002104058000000006D
-:103650000610806800000004021080000000108046
-:1036600006108028000000020210803800000010C0
-:10367000021080400000FFFF021080440000FFFFA6
-:1036800002108050000000000210810000000000C5
-:10369000061081200000000202108008000002B520
-:1036A0000210801000000000061082000000004A96
-:1036B000021081080001FFFF061081400000000297
-:1036C0000210800000001A80061090000000002404
-:1036D000061091200000004A061093700000004A76
-:1036E000061095C00000004A0210800400001080FF
-:1036F00006108030000000020210803C0000001024
-:10370000021080480000FFFF0210804C0000FFFF05
-:10371000021080540000000002108104000000002C
-:1037200006108128000000020210800C000002B583
-:103730000210801400000000061084000000004AFF
-:103740000210810C0001FFFF0610814800000002FA
-:103750000210800400001A800610909000000024DF
-:10376000061092480000004A061094980000004A93
-:10377000061096E80000004A0212049000E383401D
-:103780000212051400003C10021205200000000285
-:1037900002120494FFFFFFFF02120498FFFFFFFFD5
-:1037A0000212049CFFFFFFFF021204A0FFFFFFFFB5
-:1037B000021204A4FFFFFFFF021204A8FFFFFFFF95
-:1037C000021204ACFFFFFFFF021204B0FFFFFFFF75
-:1037D000021204B8FFFFFFFF021204BCFFFFFFFF4D
-:1037E000021204C0FFFFFFFF021204C4FFFFFFFF2D
-:1037F000021204C8FFFFFFFF021204CCFFFFFFFF0D
-:10380000021204D0FFFFFFFF021204DCFFFFFFFFE4
-:10381000021204E0FFFFFFFF021204E4FFFFFFFFBC
-:10382000021204E8FFFFFFFF021204ECFFFFFFFF9C
-:10383000021204F0FFFFFFFF021204F4FFFFFFFF7C
-:10384000021204F8FFFFFFFF021204FCFFFFFFFF5C
-:1038500002120500FFFFFFFF02120504FFFFFFFF3A
-:1038600002120508FFFFFFFF0212050CFFFFFFFF1A
-:1038700002120510FFFFFFFF021204D4FFFF3330D6
-:10388000021204D8FFFF3340021204B4F0003000EB
-:1038900002120390000000080212039C00000008BE
-:1038A000061203A000000002021203BC0000000484
-:1038B000021203C400000004021203D00000000042
-:1038C000021203DC000000000212036C0000000181
-:1038D000021203680000003F021201BC0000004019
-:1038E000021201C000001808021201C400000803FF
-:1038F000021201C800000803021201CC00000040BF
-:10390000021201D000000003021201D400000803DB
-:10391000021201D800000803021201DC00000803B3
-:10392000021201E000010003021201E4000008039A
-:10393000021201E800000803021201EC000000037B
-:10394000021201F000000003021201F40000000363
-:10395000021201F800000003021201FC0000000343
-:103960000212020000000003021202040000000321
-:1039700002120208000000030212020C0000000301
-:1039800002120210000000030212021400000003E1
-:1039900002120218000000030212021C00000003C1
-:1039A00002120220000000030212022400000003A1
-:1039B00002120228000024030212022C0000002F31
-:1039C0000212023000000009021202340000001945
-:1039D00002120238000001840212023C000001833E
-:1039E0000212024000000306021202440000001905
-:1039F00002120248000000060212024C00000306F8
-:103A000002120250000003060212025400000306D4
-:103A10000212025800000C860212025C000003062B
-:103A20000212026000000306021202640000000697
-:103A300002120268000000060212026C000000067A
-:103A4000021202700000000602120274000000065A
-:103A500002120278000000060212027C000000063A
-:103A6000021202800000000602120284000000061A
-:103A700002120288000000060212028C00000006FA
-:103A800002120290000000060212029400000006DA
-:103A900002120298000000060212029C00000006BA
-:103AA000021202A000000306021202A4000000138A
-:103AB000021202A800000006021202B00000100468
-:103AC000021202B400001004021203240010644029
-:103AD0000212032800106440021201B0000000012D
-:103AE0000600A000000000160200A06CBF5C0000F1
-:103AF0000200A070FFF51FEF0200A0740000FFFF9E
-:103B00000200A078F00003E00200A07C00000000AA
-:103B10000200A0800000A0000600A08400000005B4
-:103B20000200A0980FE000000600A09C0000001416
-:103B30000200A0EC555400000200A0F05555555568
-:103B40000200A0F4000055550200A0F8F0000000AB
-:103B50000200A0FC555400000200A1005555555527
-:103B60000200A104000055550200A108F000000069
-:103B70000600A22C000000040200A0600000030761
-:103B80000200A10CBF5C00000200A110FFF51FEFB6
-:103B90000200A1140000FFFF0200A118F00003E0E2
-:103BA0000200A11C000000000200A1200000A000F3
-:103BB0000600A124000000050200A1380FE000006B
-:103BC0000600A13C000000140200A18C5554000026
-:103BD0000200A190555555550200A194000055557D
-:103BE0000200A198F00000000200A19C55540000C2
-:103BF0000200A1A0555555550200A1A4000055553D
-:103C00000200A1A8F00000000600A23C0000000491
-:103C10000200A06400000307000000000000000094
-:103C20000000002E00000000000000000000000066
-:103C30000000000000000000000000000000000084
-:103C40000000000000000000000000000000000074
-:103C50000000000000000000000000000000000064
-:103C60000000000000000000000000000000000054
-:103C70000000000000000000002E004D00000000C9
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA00000000000004D008B00000000000000003C
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000008B009000900094009400980000000079
-:103CE00000000000000000000000000000000000D4
-:103CF000000000000000000000000000009802DE4C
-:103D000002DE02E802E802F200000000000000000B
-:103D100000000000000000000000000000000000A3
-:103D20000000000000000000000000000000000093
-:103D30000000000000000000000000000000000083
-:103D40000000000000000000000000000000000073
-:103D50000000000000000000000000000000000063
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD000000000000000000002F202FA00000000F3
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E000000000000000000000000000000000000B2
-:103E100000000000000000000000000000000000A2
-:103E20000000000000000000000000000000000092
-:103E300002FA02FF02FF030A030A03150000000052
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000000000000000000000000000000000052
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000031503160000000001
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB000000000000316035700000000000000008F
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE0000357037B000000000000000000000000FA
-:103EF00000000000000000000000000000000000C2
-:103F0000000000000000000000000000037B03BB75
-:103F100000000000000000000000000000000000A1
-:103F20000000000000000000000000000000000091
-:103F3000000000000000000003BB03F700000000C9
-:103F40000000000000000000000000000000000071
-:103F50000000000000000000000000000000000061
-:103F60000000000003F7043D043D045204520467BE
-:103F70000000000000000000000000000000000041
-:103F80000000000000000000000000000000000031
-:103F9000046704ED04ED04F204F204F700000000ED
-:103FA0000000000000000000000000000000000011
-:103FB00000000000000000000000000004F704F80A
-:103FC00000000000000000000000000000000000F1
-:103FD00000000000000000000000000000000000E1
-:103FE000000000000000000004F8050A00000000C6
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:1040100000000000050A051F051F052205220525D1
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:1040400005250555000000000000000000000000EC
-:104050000000000000000000000000000000000060
-:10406000000000000000000000000000055505DC15
-:104070000000000000000000000000000000000040
-:104080000000000000000000000000000000000030
-:10409000000000000000000005DC05E305E305E783
-:1040A00005E705EB00000000000000000000000034
-:1040B0000000000000000000000000000000000000
-:1040C0000000000005EB062B062B06330633063BEB
-:1040D00000000000000000000000000000000000E0
-:1040E00000000000000000000000000000000000D0
-:1040F000063B068806880695069506A20000000085
-:1041000000000000000000000000000000000000AF
-:1041100000000000000000000000000006A206AE43
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:10414000000000000000000006AE06B40000000001
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:104170000000000006B406B70000000000000000C8
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A00006B706BD0000000000000000000000008F
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000006BD06BE68
-:1041D00006BE06D006D006E2000000000000000087
-:1041E00000000000000000000000000000000000CF
-:1041F000000000000000000006E2074F0000000081
-:1042000000000000000000000000000000000000AE
-:10421000000000000000000000000000000000009E
-:1042200000000000074F0750075007630763077639
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000000000000000000000000005E
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000000000000000000000000000000000CE
-:1042F00000000000000000000000000000000000BE
-:1043000000000000000000000000000000000000AD
-:10431000000000000000000000000000000000009D
-:10432000000000000000000000000000000000008D
-:1043300000010000000204C00003098000040E40D8
-:1043400000051300000617C000071C80000821406C
-:1043500000092600000A2AC0000B2F80000C344000
-:10436000000D3900000E3DC0000F42800010474094
-:1043700000114C00001250C00013558000145A4028
-:1043800000155F00001663C00017688000186D40BC
-:1043900000197200001A76C0001B7B80001C804050
-:1043A000001D8500001E89C0001F8E800000934004
-:1043B00000002000000040000000600000008000BD
-:1043C0000000A0000000C0000000E00000010000AC
-:1043D0000001200000014000000160000001800099
-:1043E0000001A0000001C0000001E0000002000088
-:1043F0000002200000024000000260000002800075
-:104400000002A0000002C0000002E0000003000063
-:104410000003200000034000000360000003800050
-:104420000003A0000003C0000003E000000400003F
-:10443000000420000004400000046000000480002C
-:104440000004A0000004C0000004E000000500001B
-:104450000005200000054000000560000005800008
-:104460000005A0000005C0000005E00000060000F7
-:1044700000062000000640000006600000068000E4
-:104480000006A0000006C0000006E00000070000D3
-:1044900000072000000740000007600000078000C0
-:1044A0000007A0000007C0000007E00000080000AF
-:1044B000000820000008400000086000000880009C
-:1044C0000008A0000008C0000008E000000900008B
-:1044D0000009200000094000000960000009800078
-:1044E0000009A0000009C0000009E000000A000067
-:1044F000000A2000000A4000000A6000000A800054
-:10450000000AA000000AC000000AE000000B000042
-:10451000000B2000000B4000000B6000000B80002F
-:10452000000BA000000BC000000BE000000C00001E
-:10453000000C2000000C4000000C6000000C80000B
-:10454000000CA000000CC000000CE000000D0000FA
-:10455000000D2000000D4000000D6000000D8000E7
-:10456000000DA000000DC000000DE000000E0000D6
-:10457000000E2000000E4000000E6000000E8000C3
-:10458000000EA000000EC000000EE000000F0000B2
-:10459000000F2000000F4000000F6000000F80009F
-:1045A000000FA000000FC000000FE000001000008E
-:1045B000001020000010400000106000001080007B
-:1045C0000010A0000010C0000010E000001100006A
-:1045D0000011200000114000001160000011800057
-:1045E0000011A0000011C0000011E0000012000046
-:1045F0000012200000124000001260000012800033
-:104600000012A0000012C0000012E0000013000021
-:10461000001320000013400000136000001380000E
-:104620000013A0000013C0000013E00000140000FD
-:1046300000142000001440000014600000148000EA
-:104640000014A0000014C0000014E00000150000D9
-:1046500000152000001540000015600000158000C6
-:104660000015A0000015C0000015E00000160000B5
-:1046700000162000001640000016600000168000A2
-:104680000016A0000016C0000016E0000017000091
-:10469000001720000017400000176000001780007E
-:1046A0000017A0000017C0000017E000001800006D
-:1046B000001820000018400000186000001880005A
-:1046C0000018A0000018C0000018E0000019000049
-:1046D0000019200000194000001960000019800036
-:1046E0000019A0000019C0000019E000001A000025
-:1046F000001A2000001A4000001A6000001A800012
-:10470000001AA000001AC000001AE000001B000000
-:10471000001B2000001B4000001B6000001B8000ED
-:10472000001BA000001BC000001BE000001C0000DC
-:10473000001C2000001C4000001C6000001C8000C9
-:10474000001CA000001CC000001CE000001D0000B8
-:10475000001D2000001D4000001D6000001D8000A5
-:10476000001DA000001DC000001DE000001E000094
-:10477000001E2000001E4000001E6000001E800081
-:10478000001EA000001EC000001EE000001F000070
-:10479000001F2000001F4000001F6000001F80005D
-:1047A000001FA000001FC000001FE000002000004C
-:1047B0000020200000204000002060000020800039
-:1047C0000020A0000020C0000020E0000021000028
-:1047D0000021200000214000002160000021800015
-:1047E0000021A0000021C0000021E0000022000004
-:1047F00000222000002240000022600000228000F1
-:104800000022A0000022C0000022E00000230000DF
-:1048100000232000002340000023600000238000CC
-:104820000023A0000023C0000023E00000240000BB
-:1048300000242000002440000024600000248000A8
-:104840000024A0000024C0000024E0000025000097
-:104850000025200000254000002560000025800084
-:104860000025A0000025C0000025E0000026000073
-:104870000026200000264000002660000026800060
-:104880000026A0000026C0000026E000002700004F
-:10489000002720000027400000276000002780003C
-:1048A0000027A0000027C0000027E000002800002B
-:1048B0000028200000284000002860000028800018
-:1048C0000028A0000028C0000028E0000029000007
-:1048D00000292000002940000029600000298000F4
-:1048E0000029A0000029C0000029E000002A0000E3
-:1048F000002A2000002A4000002A6000002A8000D0
-:10490000002AA000002AC000002AE000002B0000BE
-:10491000002B2000002B4000002B6000002B8000AB
-:10492000002BA000002BC000002BE000002C00009A
-:10493000002C2000002C4000002C6000002C800087
-:10494000002CA000002CC000002CE000002D000076
-:10495000002D2000002D4000002D6000002D800063
-:10496000002DA000002DC000002DE000002E000052
-:10497000002E2000002E4000002E6000002E80003F
-:10498000002EA000002EC000002EE000002F00002E
-:10499000002F2000002F4000002F6000002F80001B
-:1049A000002FA000002FC000002FE000003000000A
-:1049B00000302000003040000030600000308000F7
-:1049C0000030A0000030C0000030E00000310000E6
-:1049D00000312000003140000031600000318000D3
-:1049E0000031A0000031C0000031E00000320000C2
-:1049F00000322000003240000032600000328000AF
-:104A00000032A0000032C0000032E000003300009D
-:104A1000003320000033400000336000003380008A
-:104A20000033A0000033C0000033E0000034000079
-:104A30000034200000344000003460000034800066
-:104A40000034A0000034C0000034E0000035000055
-:104A50000035200000354000003560000035800042
-:104A60000035A0000035C0000035E0000036000031
-:104A7000003620000036400000366000003680001E
-:104A80000036A0000036C0000036E000003700000D
-:104A900000372000003740000037600000378000FA
-:104AA0000037A0000037C0000037E00000380000E9
-:104AB00000382000003840000038600000388000D6
-:104AC0000038A0000038C0000038E00000390000C5
-:104AD00000392000003940000039600000398000B2
-:104AE0000039A0000039C0000039E000003A0000A1
-:104AF000003A2000003A4000003A6000003A80008E
-:104B0000003AA000003AC000003AE000003B00007C
-:104B1000003B2000003B4000003B6000003B800069
-:104B2000003BA000003BC000003BE000003C000058
-:104B3000003C2000003C4000003C6000003C800045
-:104B4000003CA000003CC000003CE000003D000034
-:104B5000003D2000003D4000003D6000003D800021
-:104B6000003DA000003DC000003DE000003E000010
-:104B7000003E2000003E4000003E6000003E8000FD
-:104B8000003EA000003EC000003EE000003F0000EC
-:104B9000003F2000003F4000003F6000003F8000D9
-:104BA000003FA000003FC000003FE000003FE001E8
-:104BB00000000000000001FF0000020000007FF87C
-:104BC00000007FF80000016A0000150000000001ED
-:104BD0000000FF00000000000000FF0000000000D7
-:104BE00000000000140AFF000000000100000000A7
-:104BF00000201001000000000100860000000100FC
-:104C00000000860200008604000086060000860878
-:104C10000000860A0000860C0000860E0000861048
-:104C20000000861200008614000086160000861818
-:104C30000000861A0000861C0000861E00008620E8
-:104C400000008622000086240000862600008628B8
-:104C50000000862A0000862C0000862E0000863088
-:104C60000000863200008634000086360000863858
-:104C70000000863A0000863C0000863E0000864028
-:104C800000008642000086440000864600008648F8
-:104C90000000864A0000864C0000864E00008650C8
-:104CA0000000865200008654000086560000865898
-:104CB0000000865A0000865C0000865E0000866068
-:104CC0000000866200008664000086660000866838
-:104CD0000000866A0000866C0000866E0000867008
-:104CE00000008672000086740000867600008678D8
-:104CF0000000867A0000867C0000867E00008680A8
-:104D00000000868200008684000086860000868877
-:104D10000000868A0000868C0000868E0000869047
-:104D20000000869200008694000086960000869817
-:104D30000000869A0000869C0000869E000086A0E7
-:104D4000000086A2000086A4000086A6000086A8B7
-:104D5000000086AA000086AC000086AE000086B087
-:104D6000000086B2000086B4000086B6000086B857
-:104D7000000086BA000086BC000086BE000086C027
-:104D8000000086C2000086C4000086C6000086C8F7
-:104D9000000086CA000086CC000086CE000086D0C7
-:104DA000000086D2000086D4000086D6000086D897
-:104DB000000086DA000086DC000086DE000086E067
-:104DC000000086E2000086E4000086E6000086E837
-:104DD000000086EA000086EC000086EE000086F007
-:104DE000000086F2000086F4000086F6000086F8D7
-:104DF000000086FA000086FC000086FE00008700A6
-:104E00000000870200008704000087060000870872
-:104E10000000870A0000870C0000870E0000871042
-:104E20000000871200008714000087160000871812
-:104E30000000871A0000871C0000871E00008720E2
-:104E400000008722000087240000872600008728B2
-:104E50000000872A0000872C0000872E0000873082
-:104E60000000873200008734000087360000873852
-:104E70000000873A0000873C0000873E0000874022
-:104E800000008742000087440000874600008748F2
-:104E90000000874A0000874C0000874E00008750C2
-:104EA0000000875200008754000087560000875892
-:104EB0000000875A0000875C0000875E0000876062
-:104EC0000000876200008764000087660000876832
-:104ED0000000876A0000876C0000876E0000877002
-:104EE00000008772000087740000877600008778D2
-:104EF0000000877A0000877C0000877E00008780A2
-:104F00000000878200008784000087860000878871
-:104F10000000878A0000878C0000878E0000879041
-:104F20000000879200008794000087960000879811
-:104F30000000879A0000879C0000879E000087A0E1
-:104F4000000087A2000087A4000087A6000087A8B1
-:104F5000000087AA000087AC000087AE000087B081
-:104F6000000087B2000087B4000087B6000087B851
-:104F7000000087BA000087BC000087BE000087C021
-:104F8000000087C2000087C4000087C6000087C8F1
-:104F9000000087CA000087CC000087CE000087D0C1
-:104FA000000087D2000087D4000087D6000087D891
-:104FB000000087DA000087DC000087DE000087E061
-:104FC000000087E2000087E4000087E6000087E831
-:104FD000000087EA000087EC000087EE000087F001
-:104FE000000087F2000087F4000087F6000087F8D1
-:104FF000000087FA000087FC000087FEFFFFFFFF2C
-:10500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
-:10501000FFFFFFFFFFFFFFFFFFFFFFFF0000000399
-:1050200000BEBC20000000000000000500000003DE
-:1050300000BEBC20000000000000000500002000B1
-:10504000000040C000006180000082400000A3001A
-:105050000000C3C00000E4800001054000012600FC
-:10506000000146C000016780000188400001A900DE
-:105070000001C9C00001EA8000020B4000022C00C0
-:1050800000024CC000026D8000028E400002AF00A2
-:105090000002CFC00002F08000001140000080003C
-:1050A000000103800001870000020A8000028E00D8
-:1050B00000031180000395000004188000049C0088
-:1050C00000051F800005A300000626800006AA0038
-:1050D00000072D800007B100000834800008B800E8
-:1050E00000093B800009BF00000A4280000AC60098
-:1050F000000B4980000BCD00000C5080000CD40048
-:10510000000D578000005B0000007FF800007FF872
-:1051100000000166000015000000FF000000000014
-:105120000000FF0000000000000019000000000067
-:1051300000000000FFFFFFFF00007FF800007FF885
-:1051400000000361000015000000FF000FFFFFFFDB
-:105150000000FF000FFFFFFF000000FF0000FF0046
-:105160000FFFFFFF0000FF000FFFFFFF000000FF29
-:105170000000FF000FFFFFFF0000FF000FFFFFFF19
-:10518000000000FF0000FF000FFFFFFF0000FF0016
-:105190000FFFFFFF000000FF0000FF000FFFFFFFF9
-:1051A0000000FF000FFFFFFF000000FF0000FF00F6
-:1051B0000FFFFFFF0000FF000FFFFFFF000000FFD9
-:1051C0000000FF000FFFFFFF0000FF000FFFFFFFC9
-:1051D000000000FF0000FF000FFFFFFF0000FF00C6
-:1051E0000FFFFFFF000000FF0000FF000FFFFFFFA9
-:1051F0000000FF000FFFFFFF000000FF0000FF00A6
-:105200000FFFFFFF0000FF000FFFFFFF000000FF88
-:105210000000FF000FFFFFFF0000FF000FFFFFFF78
-:10522000000000FF0000FF000FFFFFFF0000FF0075
-:105230000FFFFFFF000000FF0000FF000FFFFFFF58
-:105240000000FF000FFFFFFF000000FF0000FF0055
-:105250000FFFFFFF0000FF000FFFFFFF000000FF38
-:105260000000FF000FFFFFFF0000FF000FFFFFFF28
-:10527000000000FF0000FF000FFFFFFF0000FF0025
-:105280000FFFFFFF000000FF0000FF000FFFFFFF08
-:105290000000FF000FFFFFFF000000FF0000FF0005
-:1052A0000FFFFFFF0000FF000FFFFFFF000000FFE8
-:1052B0000000FF000FFFFFFF0000FF000FFFFFFFD8
-:1052C000000000FF0000FF000FFFFFFF0000FF00D5
-:1052D0000FFFFFFF000000FF0000FF000FFFFFFFB8
-:1052E0000000FF000FFFFFFF000000FF0000FF00B5
-:1052F0000FFFFFFF0000FF000FFFFFFF000000FF98
-:105300000000FF000FFFFFFF0000FF000FFFFFFF87
-:10531000000000FF0000FF000FFFFFFF0000FF0084
-:105320000FFFFFFF000000FF0000FF000FFFFFFF67
-:105330000000FF000FFFFFFF000000FF0000FF0064
-:105340000FFFFFFF0000FF000FFFFFFF000000FF47
-:105350000000FF000FFFFFFF0000FF000FFFFFFF37
-:10536000000000FF0000FF000FFFFFFF0000FF0034
-:105370000FFFFFFF000000FF0000FF000FFFFFFF17
-:105380000000FF000FFFFFFF000000FF0000FF0014
-:105390000FFFFFFF0000FF000FFFFFFF000000FFF7
-:1053A0000000FF000FFFFFFF0000FF000FFFFFFFE7
-:1053B000000000FF0000FF000FFFFFFF0000FF00E4
-:1053C0000FFFFFFF000000FF000000FF000000FFD4
-:1053D0000000FF00000000000000FF0000000000CF
-:1053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
-:1053F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:1054000000001000000020800000310000004180FA
-:1054100000005200000062800000730000008380E2
-:10542000000094000000A4800000B5000000C580CA
-:105430000000D6000000E6800000F70000010780B1
-:105440000001180000012880000139000001498096
-:1054500000015A0000016A8000017B0000018B807E
-:1054600000019C000001AC800001BD000001CD8066
-:105470000001DE000001EE8000000F0000000000CF
-:1054800000007FF800007FF80000021D00001500FA
-:1054900010000000000028AD00010001FFFFFFFF29
-:1054A000FFFFFFFF00050206CCCCCCC17058103CBA
-:1054B000000000000000FF00000000000000FF00EE
-:1054C000000000000000000000000001CCCC020140
-:1054D000CCCCCCCCCCCC0201CCCCCCCC00000000D1
-:1054E000FFFFFFFF0000FFFF000000000000FFFFC4
-:1054F000000000000000FFFF000000000000FFFFB0
-:10550000000000000000FFFF000000000000FFFF9F
-:10551000000000000000FFFF000000000000FFFF8F
-:1055200000000000000E0000011600D60000FFFF82
-:10553000000000000000FFFF000000000000FFFF6F
-:10554000000000000000FFFF000000000000FFFF5F
-:10555000000000000000FFFF000000000000FFFF4F
-:10556000000000000000FFFF0000000000720000CB
-:10557000012300F3FFFFFFF3318FFFFF0C30C30C5B
-:10558000C30C30C3CF3CF300F3CF3CF30000CF3C5F
-:10559000CDCDCDCDFFFFFFF130EFFFFF0C30C30CC1
-:1055A000C30C30C3CF3CF300F3CF3CF30001CF3C3E
-:1055B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2C
-:1055C000C30C30C3CF3CF300F3CF3CF30002CF3C1D
-:1055D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C2
-:1055E000C30C30C3CF300014F3CF3CF30004CF3CE6
-:1055F000CDCDCDCDFFFFFFF2304FFFFF0C30C30C00
-:10560000C30C30C3CF3CF300F3CF3CF30008CF3CD6
-:10561000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF7
-:10562000C30C30C3CF3CF300F3CF3CF30010CF3CAE
-:10563000CDCDCDCDFFFFFFF731EFFFFF0C30C30C19
-:10564000C30C30C3CF3CF300F3CF3CF30020CF3C7E
-:10565000CDCDCDCDFFFFFFF5302FFFFF0C30C30CBC
-:10566000C30C30C3CF3CF300F3CF3CF30040CF3C3E
-:10567000CDCDCDCDFFFFFFF3318FFFFF0C30C30C3D
-:10568000C30C30C3CF3CF300F3CF3CF30000CF3C5E
-:10569000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9F
-:1056A000C30C30C3CF3CF300F3CF3CF30001CF3C3D
-:1056B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2B
-:1056C000C30C30C3CF3CF300F3CF3CF30002CF3C1C
-:1056D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C1
-:1056E000C30C30C3CF300014F3CF3CF30004CF3CE5
-:1056F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFF
-:10570000C30C30C3CF3CF300F3CF3CF30008CF3CD5
-:10571000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF6
-:10572000C30C30C3CF3CF300F3CF3CF30010CF3CAD
-:10573000CDCDCDCDFFFFFFF730EFFFFF0C30C30C19
-:10574000C30C30C3CF3CF300F3CF3CF30020CF3C7D
-:10575000CDCDCDCDFFFFFFF5304FFFFF0C30C30C9B
-:10576000C30C30C3CF3CF300F3CF3CF30040CF3C3D
-:10577000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CF1
-:10578000C30C30C3CF3CF3CCF3CF3CF30000CF3C91
-:10579000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CD1
-:1057A000C30C30C3CF3CF3CCF3CF3CF30001CF3C70
-:1057B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CB1
-:1057C000C30C30C3CF3CF3CCF3CF3CF30002CF3C4F
-:1057D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C91
-:1057E000C30C30C3CF3CF3CCF3CF3CF30004CF3C2D
-:1057F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C71
-:10580000C30C30C3CF3CF3CCF3CF3CF30008CF3C08
-:10581000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C50
-:10582000C30C30C3CF3CF3CCF3CF3CF30010CF3CE0
-:10583000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C30
-:10584000C30C30C3CF3CF3CCF3CF3CF30020CF3CB0
-:10585000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C10
-:10586000C30C30C3CF3CF3CCF3CF3CF30040CF3C70
-:10587000CDCDCDCDFFFFFFF3320FFFFF0C30C30CBA
-:10588000C30C30C3CF3CF300F3CF3CF30000CF3C5C
-:10589000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9D
-:1058A000C30C30C3CF3CF300F3CF3CF30001CF3C3B
-:1058B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C29
-:1058C000C30C30C3CF3CF300F3CF3CF30002CF3C1A
-:1058D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BF
-:1058E000C30C30C3CF300014F3CF3CF30004CF3CE3
-:1058F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFD
-:10590000C30C30C3CF3CF300F3CF3CF30008CF3CD3
-:10591000CDCDCDCDFFFFFF8A042FFFFF0C30C30C90
-:10592000C30C30C3CF3CC000F3CF3CF30010CF3CDE
-:10593000CDCDCDCDFFFFFF9705CFFFFF0C30C30CC2
-:10594000C30C30C3CF3CC000F3CF3CF30020CF3CAE
-:10595000CDCDCDCDFFFFFFF5310FFFFF0C30C30CD8
-:10596000C30C30C3CF3CF300F3CF3CF30040CF3C3B
-:10597000CDCDCDCDFFFFFFF3300FFFFF0C30C30CBB
-:10598000C30C30C3CF3CF300F3CF3CF30000CF3C5B
-:10599000CDCDCDCDFFFFFFF1300FFFFF0C30C30C9D
-:1059A000C30C30C3CF3CF300F3CF3CF30001CF3C3A
-:1059B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C28
-:1059C000C30C30C3CF3CF300F3CF3CF30002CF3C19
-:1059D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BE
-:1059E000C30C30C3CF300014F3CF3CF30004CF3CE2
-:1059F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFC
-:105A0000C30C30C3CF3CF300F3CF3CF30008CF3CD2
-:105A1000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF3
-:105A2000C30C30C3CF3CF300F3CF3CF30010CF3CAA
-:105A3000CDCDCDCDFFFFFF97040FFFFF0C30C30C82
-:105A4000C30C30C3CF3CC000F3CF3CF30020CF3CAD
-:105A5000CDCDCDCDFFFFFFF5300FFFFF0C30C30CD8
-:105A6000C30C30C3CF3CF300F3CF3CF30040CF3C3A
-:105A7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEE
-:105A8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8E
-:105A9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCE
-:105AA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6D
-:105AB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAE
-:105AC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4C
-:105AD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8E
-:105AE000C30C30C3CF3CF3CCF3CF3CF30004CF3C2A
-:105AF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6E
-:105B0000C30C30C3CF3CF3CCF3CF3CF30008CF3C05
-:105B1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4D
-:105B2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDD
-:105B3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2D
-:105B4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAD
-:105B5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0D
-:105B6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6D
-:105B7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CED
-:105B8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8D
-:105B9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCD
-:105BA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6C
-:105BB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAD
-:105BC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4B
-:105BD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8D
-:105BE000C30C30C3CF3CF3CCF3CF3CF30004CF3C29
-:105BF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6D
-:105C0000C30C30C3CF3CF3CCF3CF3CF30008CF3C04
-:105C1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4C
-:105C2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDC
-:105C3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2C
-:105C4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAC
-:105C5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0C
-:105C6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6C
-:105C7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEC
-:105C8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8C
-:105C9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCC
-:105CA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6B
-:105CB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAC
-:105CC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4A
-:105CD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8C
-:105CE000C30C30C3CF3CF3CCF3CF3CF30004CF3C28
-:105CF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6C
-:105D0000C30C30C3CF3CF3CCF3CF3CF30008CF3C03
-:105D1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4B
-:105D2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDB
-:105D3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2B
-:105D4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAB
-:105D5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0B
-:105D6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6B
-:105D7000CDCDCDCD000C0000000700C00002813069
-:105D8000000B81580002021000010230000F024097
-:105D900000010330000C0000000800C00002814038
-:105DA000000B81680002022000010240000702503F
-:105DB000000202C000100000000801000002818003
-:105DC000000B81A80002026000018280000E829810
-:105DD0000008038000028000000B8028000200E021
-:105DE000000101000000811000000118CCCCCCCCD7
-:105DF000CCCCCCCCCCCCCCCCCCCCCCCC00002000F3
-:105E0000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCD2
-:105E100000002000CCCCCCCCCCCCCCCCCCCCCCCCD2
-:105E2000CCCCCCCC00002000000000000000000022
-:105E30001F8B080000000000000BFB51CFC0F003D7
-:105E40008ABB5819180238107C7AE0A58C94E9DFD7
-:105E5000C8CCC0B00388AF02F17E66D2F5B34A2346
-:105E6000D8F7241818182419184E893130EC9244A8
-:105E700088E702D5084A3130DC858A0500D967A554
-:105E8000E81B4EA39836F8BB3A2AFF912A84CE87A6
-:105E900089A3C93F86CA6F5480D03FD5B19BBB0947
-:105EA0002A0F00FE694F6760030000000000000039
-:105EB0001F8B080000000000000BED7D0B7854D50F
-:105EC000B9E8DACFD933994C7642422610700703ED
-:105ED000040D30208FA85427E1D1E0E5E8F0462EEC
-:105EE000CA80AF0892448D356D39373B6412020287
-:105EF0008ECAA1B4A53A207AA247DBD4464B7BF5E3
-:105F0000DC206A73DAD37B9152A52DB6413D281669
-:105F100068F49403BDD796BBFE7FAD3DD97B672661
-:105F20000F5FDF395F1B3EDD597BAFBDD6BFFEF78C
-:105F3000FAFF7FEDA8A242D44B08B9083FD712B2AE
-:105F40004E2084E4F55EADFB448B56935C42AA82FE
-:105F5000AAB1953E5B2F858DC669F4FE2562E809DE
-:105F600002F7C7CD21930851E0BD0242A6C2FFA6A9
-:105F70001322E7B40E8FFAE93D6955165CADF1AC1A
-:105F80006B954C883E159E6F1B97EA7972FE84D202
-:105F9000D3AD11FCB9388690FAE337CE7FC56AD30A
-:105FA000FF4692CCDC9397D35F6692991725423EC9
-:105FB0002A5C94D569A41FEF83862E5D1E4BC8F919
-:105FC0008615F35F19DBF7F97A89D4B697F6BD7FAA
-:105FD00015D1102F4433D5C8C4DE75AF27A4D39391
-:105FE00043C8E6C24D6CBDB9145957D2FB6DFFA230
-:105FF000CB25BD70AE9769BFA97DD7438889E35A89
-:10600000E324DF4F7439DE77BF971C8FBF4F64FAEC
-:106010006F0621D885AE7FBA10BD16EE7B0A1799A0
-:1060200023687BFD33E5245A9A1EFE24BD3E21FCE5
-:10603000D67B69E9C8FB7DB4BFA985D0F74EAAF12C
-:10604000EBAFA27CF4DEF7A5D026E0A33DE3E7901A
-:1060500000BD4F181F59743AB5BF69782AFE4847EA
-:10606000A7BF275EE43F8BBFAAC455599DE493F3B5
-:10607000D71DC05F1936FE6A5FDCEF789F94BF6260
-:106080006EFEE2F838DDCED64F760F6374E1F4721F
-:10609000D3272D5D3EE97B7DF9690BE0D5D3BED8D2
-:1060A0001C4152F01387D7A2D7A78577203E222420
-:1060B0008E74262422C1FCBDF7D935A3CC1080CF25
-:1060C00068F330AC23C8A622C15B5BEE16299C01A5
-:1060D00092681D5744DBDD6B1600DC81E3F34F81D2
-:1060E0003C34872AB4D974BDFA34E3A179F49A51C7
-:1060F000AA0BB09EAD44042540C7AB36CB4B815EA6
-:1061000004DB4F9BB7844DC0030913329C90FBF80E
-:106110009A08110D99B655F8754CAA75A8A493E183
-:1061200043B8E8E9FB7EBAF5ABBDEF918B45F0FFD4
-:106130007B08AC6FA0F74894BD67D27F80EF1CD777
-:1061400038FA1CDAB6F17D80D8DAF4F951F805F1A5
-:106150007DF717325F36D9A719543FA825A29E8034
-:10616000FEC4C896693BA3922A22781E24072945BB
-:1061700006A44B332195EDC08FA49D2C9CD80BDF3A
-:106180002922E07A0A6EDFB9A685AAAE7365FE10F1
-:10619000F079502764584EDFF56C6BA08C3CDED64E
-:1061A0000E3D87FC1FA37C3486BE6F86983DDC5A6B
-:1061B000F2B21EB5C977862070BE74F30731E419B8
-:1061C0002066C02AF45A2286BD814FCF1FB20B8FA2
-:1061D00083E50F7FD4461F32747A05B9DF3058FE4D
-:1061E000F8B4F35974ED2B578D165D3542E9B0A51F
-:1061F00078514AFF233D5DF711E89F5142C289144F
-:10620000EF8D12042E07A643DFE095D2474A92F79E
-:106210005E07BDA4FC192BF6F6830F29D7890F6BF7
-:106220005C6FBD64BC4B5522917511C653613CCA6D
-:10623000A75B820F9B84CAC339E06D8A0F293EA5F4
-:1062400013DAA498201FD29F4E81B6BDC170622B75
-:10625000F24102E962C1E73144077EE55C9FA34D4C
-:106260005698821D7E6FBD8A70A8E823D071743A5B
-:10627000204585EC279DC0B716BF021B5CBC14DA15
-:106280005F77F041AB3195A4A283C5AF8056C6AF0E
-:106290005F1F9C7E71CFB7C409EFA0DFF3CBC64967
-:1062A0009B1D4AFF9E4C4E5AF4A148AC82016C7C67
-:1062B000B059210784C98434152E23517A77333C91
-:1062C000A276AC05AE05E01F4E45BD40DA0419E0EC
-:1062D000B4EC2A09E660BFE98281E3895A2DEA1508
-:1062E000C91F66F6953F4F0F179B7FB8110FEB1430
-:1062F000BFF9241E16297DA8AE0C7512D09B610231
-:106300007C40428C2F24EEA75BEFC7383F7BC951FE
-:106310007C9F6A5753477BE694E3B9127D48C7D9FF
-:106320005242121EA4535C83B65C2213D81750FD50
-:10633000E42FA0FDB32CF697168400FE2C6E5FC9E7
-:106340002CCEDF02D56714CFFE694EF9F6B9E45FB3
-:10635000E6F6B88F3E4BB39FB0AE6EFFED3181FBDA
-:106360006F19C48FF4E6EF137F6A7FD5F2DB2CBC84
-:10637000E68904F1497EAA249E28E26BA3ED7BDE28
-:10638000CA4EC0BACD8AC89A668A07F36D21D40472
-:10639000F494C33D59F4F9C92725DC2FE52DABBF93
-:1063A00004E6DBDE608E2DB6F983DBE55A0DF04D99
-:1063B000F942B3DB8B1B48F405C1B6FFF2045BC6A0
-:1063C000160F43FE7BBBBB044C8580FCE7F5C78200
-:1063D000AF825CF2FB49FCD8DB52DF766E3EE1F621
-:1063E000F286F2309DB71574D7087C6C0A149ED6DD
-:1063F00002D6FE49E3F072B09FAD99ACFD51E33B8C
-:10640000E146E48BA816A1F7EA09C74B17C50BD2E2
-:10641000DFC8B7DB57F7D5BDFE1DB2EE033EDBEBA1
-:10642000CFB9AE04EC67991802B4EF8D1DD1D7D85F
-:10643000F0F14D4FC51B808F91242110A05F2C17C8
-:10644000E5C7F2E780F1A05DC0E5A9901CC67EA378
-:10645000233DE50ADC5AA1BF0CD796E073D9284F3B
-:10646000648E7E12E55F122E5E3E78794FB7DE8035
-:106470004022A9FCF9FBA51C94ABC034BA6E875E20
-:106480002FD4911FF9B85F031A81FEC8A6304D06BC
-:106490003D125F114931DE4F0411FB69600FAEA060
-:1064A00068285C56F66F74BD9A169EF22A85CB93C7
-:1064B000EB0F990836B3130697014FBC5103FC92BA
-:1064C000A31201F9D70AC391DB804F49242CD0FBDA
-:1064D0005A301CDA6AF45D9F4A987DC8A1D78B4C6C
-:1064E000BE09F4BF274FC7FE04EC85B5AE31009757
-:1064F0008A707D06F4CE15A70F4CE711A4BD1C8C45
-:10650000593A7A7FD6744EF7BE9BBE0181C9D7FD3A
-:106510004DE7C32695A796E3822881528C17235D09
-:10652000344E97F34A5403BF71CB5745B28FB61F11
-:10653000ADEFDF4F89819FE2B1D94D9DD16FE45D11
-:10654000FA5460A174EFEDBA4BAC4CA4E0A74A91A9
-:10655000E9FD2D773D1C1F0BF47CC5B9DF53568533
-:10656000D12FA5FBBE4AA087F59EB798D927B29F29
-:10657000AE87F657B83F723E6F511649318F75DDC1
-:10658000E382BF90E23995DCDC2771FF6A271BDFCD
-:10659000F277CE17F43FBE859F0B9522395C8A6453
-:1065A000F59152BE188AF7C2A4DF9D876D0F7F94C4
-:1065B000A8157D04EC5E6167395C15D2D3087CBAFE
-:1065C0004B2455A9E05B2B89085F61986E3DA8DEDE
-:1065D0002F3445D04CE45EC9C0FBF9AB6A0F2A9456
-:1065E0002EADA34808CCCC25301EE8D5835EB49FE1
-:1065F0006A2E4978A99E7EADE82B26D865BD908489
-:106600000116BD16F69CF43F6A5F0DFA5CD9183589
-:1066100011AE6004F708878A9621BD5BA87FE76109
-:106620000B71F0538B297602DFC6E9F8E00FC68DB7
-:106630000A94D773416AF9E1E7630ABFB5DFB8147A
-:10664000E242949400E70419E1A423317AEA0C2F82
-:106650002377CF229DD4EEB466EF427930AF242861
-:10666000AF32396C0A6067E48429527863554C1F55
-:1066700028B971C16EC7F690E88376BE91F54EF4E5
-:10668000FF5AFF2CAD4885D76A91E9B7FBB83E3C6D
-:10669000AFB4CF477FA399CA4751DFFE614E876FE2
-:1066A000C7163D381EF519B34BD6F32EC170C43151
-:1066B000475E50713D6EBF661EF76B5A0AA95F8335
-:1066C000F24E16801F93C1F9A305B0479F7BB249D4
-:1066D000C2A47064803F43FD1252CAFC128DFE03B7
-:1066E000FD97BFC2E9CF785C7E4B3A7FE66B42E410
-:1066F00007A8EFA8AA02F8770BF1F9E300DF057409
-:106700003F69F45D7717DF4FCE95B615B550B81ECB
-:10671000CB151DFC309ACBCB63C43C71913E8F17D7
-:106720008A06C01DAF17711DE70CE6B79377BD0E43
-:106730003BD16C2ED2884DFFECE0F2B4AD4173C872
-:10674000ADFBEA57E3D1480ABDA573FA64CC0A63EE
-:10675000FCC31F4A20FD619DA9FCF4074A2BB4FE2F
-:10676000F49F5CA2AE41FC15569C92E15AE6DE2FE6
-:10677000A51ED77D25763F534ADF6FB0D72D144F26
-:106780006F2B0E7FBC53827D9749D0FFF386A8A95B
-:106790000AC0551F0EF07B4354DCE0DA5D5E09F75A
-:1067A0008D59110DE4C8B2CFDE50642BDCCFFA92C4
-:1067B000BC05E8E52D174589D24F934D9263939B15
-:1067C000A970D3C6DF99545DDAF1A145BF52097EA5
-:1067D0002A2914C9580AC7E68F1B343B9DBAE836EC
-:1067E00084ED5B9D7C13AFEF5FCF7E5ABEF8B96836
-:1067F000C5439CF4C21F7B3C84D33949FF3E718D55
-:10680000FF1CF4D638FD0C4ABF4D06D093E90BBAF5
-:10681000F142FF21AE996168C70D43346D7AEC6394
-:106820003107F1205F90512FED5ED312067AE974A3
-:106830000C202DBD8653D9ED2E4145B9A27AE32A0D
-:10684000693A2A6401E29F73A58D48EFC728BD41CC
-:106850008F3D466ABB2EE6F6CABF1655D18FEF6A4A
-:1068600034CB1B8B87A237297CD4AF237B98FF7254
-:1068700089E5BFFC3DE59341F82BE7A9D1E0F6D8C7
-:106880000B7C25775396A670156E6476137CB51C29
-:10689000DA36A8DDEB147AF9D1C3E7514A1387C77A
-:1068A00023BD9DF6E9B1C297050FD8B76266DF54E4
-:1068B000B3330C7A26504CED1341FBB31AF033A2DC
-:1068C000245E0EED91BBE7E13ABE0D7EA81FEC0BF6
-:1068D000417C7C534C349A9466BE70A4539460FF00
-:1068E0004C707F67D1CF3D2FB57A484F5FB6B81750
-:1068F000E814A83D0CCBB4DBBD6A29AFD71E8E28A7
-:10690000E94475EBF617D2FA097F96F87E6C666358
-:1069100098B647C1AFD49FDC293EDE08FBB188277B
-:106920005C8F7477ED239271281EEF5E5B6609958C
-:10693000B1FC37749E3BBB140A00013F40B2C781D3
-:10694000EE04BB44F5CD5A6ED76E2591003C3C4316
-:10695000448CAF9D21470257D8F870A7A4B2795A4A
-:1069600095B7217E6FC5776F8BB3B6A57FEED8ED57
-:106970006CDF4E160D87F8EDED3B155CFF9DAE7D8F
-:106980006B4CD271DC3B486D0BE0A15921E827AC80
-:10699000D5890CF1D80D3FFCCE0CD8277C9BDB951C
-:1069A0000F287F1936FDB3CE9F50613FFB4EC715B0
-:1069B000CBAE26F07EA26504ECCBB3494A3B7A4BC2
-:1069C000AB13BE81E077C34BC8A67EE190DB849415
-:1069D000F1C3A724C11137ACD70293206872DECB74
-:1069E000AE6605D31FE66FBD8926F0132583F7AF8A
-:1069F0009DCCF21CB533E13AD07B3FE3FEE850DF9B
-:106A00003B9CE6BD0D5AB70AFC5F239B9582D81BC1
-:106A1000AFD294DAF04890E303E59D2389A35FEBBE
-:106A200020FB558AFDF473C37B4AD74C71725FB863
-:106A30006F20D1B740EECE8BD16A8C1370B83D80F9
-:106A40006709AE32D213E3274530AFBF55C882384D
-:106A50004A07FA275E4376D0BBC6D203542F41DCE7
-:106A600027A3C4F9DC1D57E949D2B513E50B43A2AE
-:106A7000744901CDDF2981BF58269F4EF6A7F355F3
-:106A8000C3BA266327D42F755CBF5413E3C159D30F
-:106A900050BE305E57377F8C0970D4E51921D30082
-:106AA000351A0AE3182EBEAAB92090846DFF5D2323
-:106AB000F7A8204735547FDBEFDF1364F1E4747AE5
-:106AC0005B219AE12F01BF56443C493A6DDBD6FD6C
-:106AD000515CA86C67FBAAAC25FDEC8BEF09B27882
-:106AE000F1DA2D63B358DCC5A9AFCE72FBF0936722
-:106AF0001E57BB41CF3C7DE27A58E7FAFF29118D42
-:106B0000CE7BF6994CD2897623A182DD58D721A578
-:106B1000B4878434B1FCF9F732915EEB9EF324160E
-:106B2000D0F7D7BDF0CE2442E13BBBA9E7B591E059
-:106B30004F3F2DB0B8B8D93D6931BDBF4E26AB53DC
-:106B4000C55926C86C1F72FA47192B407E85B6833B
-:106B500037E3B8EDCB15B0AB563F4356905F693F76
-:106B6000B4DBE6534262AC900A3E968F38FD94C087
-:106B7000E03BA0E0FE6F5DDB5E354AE1A869FB10FB
-:106B8000F5C5ECEF3D1B003CD41C901C7E5C4D9B7E
-:106B9000D4E99984D713708538AB3003F884F34B6C
-:106BA000C7068CAF56B73FF0A11480F79D7A8BE2F1
-:106BB00025D409787D530A2D80F60FFE316050549C
-:106BC0007D70F88900E0958EBB46CD8238BE93BFBC
-:106BD00061FC0B397DC7A39C8EF9DE9AF62D6C3EC5
-:106BE000975EFC007E29E81B878DC8CE3C3A691B66
-:106BF0005C9E77FDB3E71E35E97CA79FFBFDA326CE
-:106C000085FBAEBFFCFBA35F07B9FC67AF0E7ABD87
-:106C1000E6E95F06888D0FD7C92C7E707614DD42B9
-:106C2000D17E677FE549804370F6A5F7461B74BDAA
-:106C300067BFFFA7E106ED5FF7D2DC7C587FDDF38D
-:106C4000B3F3FBF363804F131E3B5C091CDF38205A
-:106C50003067E1457E75D1E550C7A1D100E7996362
-:106C60001EDC9FD5D07BF553814E1BD0CE427B23BB
-:106C7000C56FF5339B3F04FDD017CFE64811835F06
-:106C8000540D0681CEEFCC437A911EB48FEEFE35C3
-:106C900047291D27A7A7DB39F2B10A7AAEE6992D5D
-:106CA0006C3E17DDCEC02F57F6A5DB6617DDCE9103
-:106CB000BB1E2B80C46BC730471EC1BAF6C6CF239C
-:106CC00059917EF48325FF03E115F32C14AEA572D0
-:106CD000F81B32C8D1731949BA2E00BA3E7B6E3404
-:106CE000A17CF1BED27333D8839E973CFA3E7A7F63
-:106CF000DD4B6FA25C9D7DFE75D5403B46FC02F5E9
-:106D00002BCF92E4CF61F033AB99CF496AF6677627
-:106D10007A02BDF4A94E2CAC340278FF04DE4F3069
-:106D20007EAF4E1C5C22A4A0D7EBF218A6FF13790D
-:106D300088970DFB7FA312BF938E4219D0F1C43CFC
-:106D4000B89F8E8ED6FA7558FF4C1B3DF7333975B8
-:106D5000F7AFA6F208F62E49D784F02649219767A7
-:106D6000F77A64B07767C1AF4A993765FECC50F3C4
-:106D70002B3F939DF557C9FC0AC7437AFE60F23D4D
-:106D8000D0FA868ABF1FC9068EEBC6E3E98F53EBA4
-:106D9000FBF7B8BEA82666E5884BFBFA2132899836
-:106DA000238B7AE13D0D1B54CA7FA79F96301ED4DA
-:106DB000D27E08F5B65B4F54A7896F5E90999F50BD
-:106DC0007DE0E024D067A75FFE11F267F53327541A
-:106DD0008817BFD6F603B5BBB4571EC01E246CF689
-:106DE000E0F4770F4E627A808E9F824E8AC2C6AFE1
-:106DF00079D1397ECD331F3AC65F6FB6A37F30D0CD
-:106E00003C1FC8E1E5B0DE0F0E2B04F4E807ED529D
-:106E1000652ABFF6036E0F2D3CB5BC3EEF379007D9
-:106E20009B76C46780DDECD814CEDF0EFEDA1185C8
-:106E300080DE2672F8F71EDAEE78DD67407EBAE370
-:106E4000C832C9B0ED437FE8C2E7CCA3E6EC4C3AC8
-:106E5000DECCEEC8347051DD7AA3EC38DD57D9F8BA
-:106E6000A0EEF5CA7CD0F7B00F35C6C37CA120ECEC
-:106E700073A5C0BC4A96BF16756F4A7BCDC653FC3E
-:106E8000118C5729BA988C91C1B82349A211E2AB51
-:106E9000C4EF77E727229A3D0FB5E2F041D862E6CA
-:106EA0002E7EB100C60990987E12FD4F12BAD88F7F
-:106EB000FFE5CE4758F84CCA5F9AFC44867E73F0D3
-:106EC00020E93B5EDF3C4C5483F8768B7F6D6B9101
-:106ED0002D0FD312EC938799AB503CB40A2465BCB8
-:106EE00076BC52315FC9C3DD7134D5F39B1426578C
-:106EF000D792EE7BD7009C1196CF99E5C2D79738F1
-:106F0000BEFE79325D3855A1E5E05951FCCE5E12E6
-:106F10008E29F4FEDC553D97BF8CDD793EC71C2FD2
-:106F20005ECC183CFE869AB78B7816DDAE0C226FCD
-:106F3000972E7FDC0B87C9F7E3398E3CC6A1B7EEED
-:106F4000D7BA31CF50DB5A648BFB0DEFF49230E6A9
-:106F5000F10CF40F8777DEF9CDDB20EE9C5B18F2A5
-:106F600092BEE3C817AEC6B89195CF970BC39D10DC
-:106F7000EF9775A35CC279968721BFB0D960F9827B
-:106F8000CDC1FEE37A339468B382F1A86B705C5193
-:106F9000E3F507835CE737160710CF018A67907720
-:106FA000DCFFC0FA8E0B3C6FDE6D4A903F3C918D4A
-:106FB000F982804C4A201E705EF08536613EC19990
-:106FC000374FC7BFDB6513F3E6AD469FBCF97714B7
-:106FD0005BBE414B9337D7FC4B306FAE119BBF5B11
-:106FE000D4DBAF57EE5C7973180BE332DB67435C9D
-:106FF000A6399B38F2E6CD20F85711F29C72F56C59
-:10700000AC3BF3F2E7E6ACD9617B9B1C7F19DB3C20
-:10701000FEF4C7E6739BA07FEE48528B756A7284BC
-:107020002CB5E9C1F71416A7DDA0847FA8D8EB8E94
-:10703000383F58F99F436FBD877C05D73114AFCDDA
-:1070400094AF3CC857A7885DAF5A578B7F9A8DFE87
-:10705000F942BD3005E366C976D044BE0804A3E119
-:10706000708AF7267998DC5BF306CAA81EA5F2A6FB
-:107070001811CC47A93ADDF01A83873F1D5C169F93
-:10708000361B63581D944EB07E2FFD3AA6B13826AC
-:1070900044B8285CBB6EBC3DD49F9F63AD73861221
-:1070A0003E69C77BEE25A9EB77AB55B6EEE6C82A5D
-:1070B000965FAF72E653217D6D8FB34E17A2FFAE80
-:1070C000609C90E553452DC2F323A6151F0F26E3C0
-:1070D000E106D419DE65823E5456B59B025C7359B5
-:1070E0003E25578B7EACD8EC83AC7733B975E5077A
-:1070F000E74AA787845FAB2E6E6B838E7EFA9686F7
-:1071000020B6373718786D6908E37D371D9B8D975A
-:1071100083B7605D9A0FE3B2E9C67FB02184E3C410
-:107120001ACAD8783C6F4E486613F0952A5AF23244
-:107130000CDB7E893F370B9A40FEB60BECF9352D00
-:1071400097A2BC59FCB3C3E83F2E2D2566201F0C27
-:1071500075FCBEFCFA135C67F32C3FEAD781E42888
-:10716000AB93CD3BD87994A4BD60F3EC98A5E13CFA
-:107170003B72079827CEE619187E86AF6D074F61E0
-:107180001D8242F9015494A28753D7E97179EB3BF0
-:107190008E07F57C7390D585A9C5FE3028FF6683E0
-:1071A000E71B0B59BE512D195E01F7D5D065582745
-:1071B000AE96FA319FA7160FBF05DADB0E6ED12B04
-:1071C000C07E148A21AF0176BB9BC8B9283618BF90
-:1071D000558B4B6E83FE3AC83185639487EDB7D4E7
-:1071E000E2ABEE80F70F4E79CD68A2FD9B0B7D21BF
-:1071F0000FC85BB7ECE0FF41EB8942671E8DC854B6
-:107200005F50FDB56DCAED25289F9AAD4E3245BD44
-:10721000A04D6F6C506D7A4325734CC0433ABD430B
-:10722000EDEF7D6A5EDF71ACF73728917A15F54294
-:107230008438EBDD53E7B32D7A809B05F948399804
-:10724000ACD35B5030BC37BF6DD5E9B9F3DA71FA16
-:107250002F555EDB5D7FFE59D5E9ED5493757AA31A
-:10726000A04EEFC70A0975425EFE9752689FD197FC
-:10727000EFDCE3B9CF5B50FF47837D4E3AB9FC9911
-:10728000EACC9F16445D74BFD5EB98EF159097D26A
-:1072900081F5CBC82AE738A36A9D75B597D4E7383E
-:1072A000DA45E60847FF4B5BC7389E8F8D5FE6786F
-:1072B0003E7EF754477B42E22A47FFCBDB2A1CED98
-:1072C00089EDD739FA4F3EB0C8D19ED2B9D2D1FF9D
-:1072D0008AAEB58EE7D30FAF733C9F79EC1E47FBA8
-:1072E000CAEEAF39FAD753774805B9CDE575C8B9B5
-:1072F000F9A23D4FDB9A47ED12DDE7EFC8A30C83FF
-:10730000F16F56D7A5B2C7C9BCA1FB3DD950C33A4E
-:10731000E6FDC7CD812B91EBD09ECAC6F00A03EFE4
-:10732000CF98075732CD595FAB1AAC3E19F671CEE4
-:107330007A01679DB12A6DC33C9DE7F897BB8449EC
-:107340007DE9AA163AE560B075CA8AE17A6F88725B
-:1073500071DE928B51542E30FEF6B184E75AE6640A
-:10736000A27F61DB4F211EADFDD4351A89818B6967
-:10737000C945F9AA9E91AF62376B1FE51187521775
-:1073800067C95FC0A6F761BF62E999E6B2C1E95774
-:10739000297185C39F745F9B02EBD2E9C7028FCD31
-:1073A000BF77EBC7194AA4109E6B72D824B6780D2C
-:1073B000A9551C700F16CE4F6A07EEA20C4752E873
-:1073C0007195D462DD55CB8A300601481D71F0E914
-:1073D000CEC5FFA30CC6A57EE10CE73A995FE8F69F
-:1073E000A7A97E437F7A07F5A7D1DEB9F423D55349
-:1073F00026AFFF32981FC1F4A17B9D9F971FFD6FA1
-:10740000E0ACF643AF4051A812F787792281FD61C5
-:10741000F3AC4810E27356DDBCF55EABE7521C27B7
-:1074200096AB8A10BF8C75CDC5787D9316D5589EC6
-:10743000388AE334658B7AAA3AB13A0FCB176BF5E9
-:107440000F8CDDDF4FDC45534934553C6DA787E594
-:107450008362FADA2EB0A39979AA017BEED683A7CC
-:1074600022104792CB641DF6EB8402F38E2DBF47AA
-:107470004814E34C5A5044BBABD5EFC0F90782F730
-:10748000668FC0CF7D6CE9175EAF9A3AEE920EDE42
-:107490002D00EFB481E1F502BC4530FF369CBFC63C
-:1074A00063A4C4BF42C295B3816E27BE1CC1742BB6
-:1074B000651B908F1D656C5F4E0D8183BFAD7D0E8A
-:1074C000E5EF873D7958BF8A7C6D9D73B8D1A3E302
-:1074D0003C165D49610EC63502D1D8D862CA6F9993
-:1074E00051B69FEFD54F8C8F329530817896EC173F
-:1074F000313FA8F27888D5EF0F1C9F4DB3BA915E4B
-:107500009BAF94C926A1B7CE3A5648D735B9775D17
-:10751000FFC793CDF893CFEB234BB2B02E457A261D
-:10752000D89FDEF6717CB9F5F7F73C5C7F179002C7
-:10753000A6BF4B9743BE3BDD386E3FA69EC77987FB
-:107540005E5FCFCF17F8EFE982389315E723C16963
-:1075500029E3F2BD7865F9CA5EFA2E373A29FDE4CF
-:10756000E953314F6E9D57A0EACC592FCCE96BD12E
-:10757000D58AA393208B1F5974F626F1B9A75F7C97
-:107580007A415EAEE88BCF5F7978BEE1BF183E5F8F
-:10759000019F865E3333D9F97472E8AB04F35285E8
-:1075A0004E39B4DEB3F8DDBDFE3FFD17E5276BFDB8
-:1075B000163FA4EF6FA6DCD758F9D54CCE6F1A9CB6
-:1075C000B2A28AE7D5B2B75B2F85FD6BD08FFBBE29
-:1075D000CCB2189EEF5588A9835EC8B4F635FCBCC2
-:1075E0009155AFE42B75FA659A6BFFA2F2BAA83EEB
-:1075F000E76DB9FFE63E4795C4AF8B5E93B534F9AE
-:10760000B1419E3FDAC5F3750575F146D80F17DC19
-:10761000CAEAFDF7286435D4578EA832455F2EE4B8
-:107620006F8ABE9F41D75FF0E2438D238124B71A52
-:1076300045E0663CA3190E3B5C7057BCDCC79E4F0F
-:1076400081719ED298DE2DA88CE339E7A6E7C76743
-:10765000819FF0CA5BCB75880F7C945B8CFBA73352
-:107660002F78C2A0FFCFE4902AAC0B7B61E66BE0E1
-:10767000C7FFBEA12B47B6F1C999EFBE3E43A14457
-:107680003AF3DCEB33642456C231FF868BBF98019A
-:10769000709B15A4A416F277BA4A60DC1A8DE5CB6C
-:1076A000AC7A9F5DC3D516B8FED49BCDE289F9E2D2
-:1076B0000E68D743400CFC061ECFBFFAB4B11CEADB
-:1076C0002FB3BB1401EAF11E124CD34FAFE74F3C6E
-:1076D00024809FA576D6429885DE0F1D02949B6379
-:1076E000D9BEE47C112929A27ADF77B8763CFAD397
-:1076F000AE7A278BFFE5D904F37D3D376A09B0D711
-:10770000DB65E31BABC07EAF92B11E67BB7C18E5A7
-:10771000C24DC7E3DE31CEFA5C1E8F3EF4D61DF1BA
-:1077200072FAFE3D5344E457FF8929592485FC6EC3
-:107730006F28C3F903056F579603581FD3BB337ADD
-:10774000F7497E999859D4442A45A2A950BCF8CB50
-:107750000879DBC6772D2209EBF4F90B0D04C7E994
-:1077600068D0F0DAD6A08F2DA61B836F3504F1BA4E
-:10777000B3C1C0EBC30D25F8FCC1869043EE61BEDA
-:10778000B74B783B85BFF2795D1F68A0F3DAE0D88C
-:1077900035914A3DA5D72E9E8F7AA0746AD6DA7E9F
-:1077A000E2607B1ABA86CD19CB9105F5A675FADE93
-:1077B000ADFDC0BFA75158BD08FC9ABBE5C83ED47B
-:1077C0008FD1824536FD48FDB6024259F1DE961151
-:1077D00073E614A03CA2BC4C3B1C457FBC20181790
-:1077E000208E587094DDB7CE5B20BDA8A0FD307709
-:1077F0008EA080DE2C25ED00965A1A2515B4FFCCFC
-:10780000BC25E5709F4C74DE9FA132F986712BE890
-:1078100075B616F991361DBED3B1DB7C96AEE78FF7
-:107820001D1E03F23C0FBEFC2715F605B15FA91A19
-:10783000F831052F9EC0BA8798D0AD4265EC71AD86
-:107840007A8E4CF50C6E0631BE4A150BE59318E89E
-:10785000588C7FF6C4E6F8E1BC4BF494BDFF2E5F74
-:10786000F46E7E7224AC05291F25F317EB6361BA11
-:10787000E97C81E72F8E6BEB626621B469FF29AC4E
-:107880001DA3EFBF901D1D296643D14555ACEB4BA1
-:10789000D0B6FA57C5A0DEF64DAE77883F5A04F24F
-:1078A000966CEBB49D696BCBAC4D3476B5D6BBE131
-:1078B000D09F5E033D57FDA2D00EA051BDC7F07F03
-:1078C000E021ACBB6D6BE8D2630AA7BF45072A92E3
-:1078D000138204EBE9D484901843F5C704FE7D8A33
-:1078E000826961A311F46B420981DE0CF998DF38DB
-:1078F0002141C7B1C9D58434DF41C1BC2FD0711B30
-:10790000AB1B76F3D7B35E961FA827E656C88391C4
-:1079100067141DF3913C4E79DAB2737CBF7A979766
-:1079200035954DA6EF32D03F6B648C83AD2F8A978F
-:10793000AB749EF53F2A0A51CB0A7925AC6B589F50
-:10794000DD3E7C2ACB4B39DA0FF13ADA60B6990D7D
-:10795000E707AA0F3C341AEA02AA49FCE6AF01BCC9
-:10796000FFCAF28FA70E5E9975356D6FA06D88BF47
-:107970006EE8785D8DD27EC338DCD51D53AE83F5BD
-:10798000556F138958C4E4333C9EE2391CBF4CA6A2
-:107990007C72CDD69173BD94CE4F8D09EB22E583D9
-:1079A00095BE71CD1AB4557D02C8CD4ADFC466E0DC
-:1079B000ABF513F9F71AC8C457C332AF97A27C319D
-:1079C0006C4B430CEA13F6AFACBC0ECCEC7091C917
-:1079D0002D6544CC1F4AD931CC5BFCA1999D7781A0
-:1079E00094FE464A87629974C9F4BA4B65F4335BD6
-:1079F000648C17D3FBADCA54A04B3C8CE72B5A992F
-:107A0000DE1FFBA207E3CEC5B5E13BD12FD04B7102
-:107A10009F329A247F302F7D09FC46C719AF93729D
-:107A20003887F0632F8B1716AF58B61EDE93329748
-:107A3000F8705F2EB17350E4DB2C4EBD4B4CB46B31
-:107A400020E78162A4EFAE00E30BF3E152E48BFD8B
-:107A500062C56577435C5258B3F55F80AED9C50403
-:107A6000E80AF7EFA1F7F7737A4AD9211DE8B79F23
-:107A7000D33396104DA88FB1EEBF20ACBD13E46D8B
-:107A80009DF7F9391AC5EB704F383E8CD2E14EEFB5
-:107A9000F3B16001D2618C46F17EE7968E98368A0A
-:107AA0008ED3181EA1DBDAE3FF4CBD11CC4F76A0BC
-:107AB0003CCBD90FAF0379A7CF5FD1E83A9FCAE19A
-:107AC000FA823F2F1E93D41F61426D8DD4D8AB4FE5
-:107AD000346A1F8A6DFDE7507DF0E4A3AC8EFD7A19
-:107AE0003A1FC83B5D07E67F7B26C809A8CFF25145
-:107AF00058C06FF14D1C83F57974DD04FC929E89AA
-:107B000032DA592B8EED9920627C09FA033FF84650
-:107B1000B1FE545022A037E54219F7ABB2B4273C6E
-:107B2000C180F031CBEB0AFA423CB7EA2DB1E571E6
-:107B3000496F1D30B68BF033378EF6584F7781483A
-:107B4000FDCADCE30B85D174BC3BBCDCDFCEA5FEFB
-:107B500036BDBFDECBF4D2FD11F3CB10E220467769
-:107B600001EA2712990AD7FC9B8AF3A3FDD8A5BE88
-:107B70007E7537FA0F3BFCA9CF694EF7B1FD7C93B8
-:107B8000FF880EFC564FA8FC835CE88CDF2CFD615F
-:107B90009D4F70D7135BFA44C9666BAC9B5F910F26
-:107BA0007A40E6F549B21ED2A1BEB23C731AFA7D04
-:107BB0004F7A99DE930E5E79039CD350FF95E5854D
-:107BC000F678A3184FEA2920EDC0AF72304CECF9DB
-:107BD0005F4B1FB43468787D62EAB80A909327A699
-:107BE0000EAFD0A90C1C9AF4E32EC8339DDBC3E47E
-:107BF000F7DCE1DBF0FCE33993C59B80AD302ED997
-:107C0000F9089ED77D5C8E3C8875B5501F4141DADE
-:107C100096EDACDF2AE67831B97E6A56D8F3CD0D01
-:107C20002C7EAC5EB81CE35A2AD7E39EE8AD786E92
-:107C3000C3436D199CAFD48869B2EF1D303C688591
-:107C4000CEEF61A81726E1FBA697C58FAC7A117716
-:107C50005D8805CF0C0E4FDF73194E7A58FB2F8BC2
-:107C60000ED6FB7542385FEF876F6A2E4824618B12
-:107C70007FF4D677AB78FF2CD4C567411D4F347E97
-:107C80007511C84102F7475E7F1D21FCFB4AC8A75A
-:107C900041B9C75E879EE1AA8BEF232F86B3EDAE75
-:107CA0008B580FCCC1EBF8B09E5526DF1428BDCF02
-:107CB00064FC7606F8B535543D681020924D1DE6FB
-:107CC0003FCBFD7DF9C5BBC3230D1B9F0B86639F77
-:107CD000507D6021C6116AF6FBB1DEBF1AF4DF6485
-:107CE00038376076791CE705C29D509FA71C60E37A
-:107CF0003D09F0D0FB7FD4AB0A60DDC761FF93077D
-:107D0000F6242AB1432F87110F316FF818D1993E0D
-:107D100093294FC4B22D7D561D830DC32E9538FC7B
-:107D2000A55D3EDEF655C762A5BDF51FC7B5FF8749
-:107D3000FACDAAEF38AEFD07FA43BBD47827E83B6B
-:107D4000F3058F01F68BBE8FE777CD952568076227
-:107D5000456404E0E1956C15F55CEC79CF3ED07399
-:107D6000B3B5E89B9A6DDF7026FB8DD1B0FF4A3129
-:107D70009EE9186FD4D0C6A3F377005EADE7AF6479
-:107D8000EFC2738BF43D03F386858747AFA1EDE126
-:107D90002F78F0DC90B5DF74F3653E97AF16D77996
-:107DA0004015E4CD0FFAB616E5CC1374E6C12CB934
-:107DB000532F4C70E4039E043B4BE9A7CA51085172
-:107DC000D2E7A5F8DCE47CD6C2EB11D2CF93936660
-:107DD0009E2B509ED3CF3383CB3BE1722CEBC9EF6C
-:107DE000C2F4736ED09D2771EB29EB6AE9A96F711C
-:107DF000FE9449F40A1F9D675DA27D9E0FDF8E4EA3
-:107E0000023FF8038D9D832A697BE86530CFDFF45C
-:107E100084EFF74EC7735FFFE4CD1BBA3CACF4119F
-:107E20005E97D9470F31FFEA56E6AFD6CD9F8AFE5F
-:107E30005DDDF631BAFD9CA2FB5A7521C3A1878690
-:107E4000790DFEBD3D13F551D585003EFFECE6F3FF
-:107E50003ACEAFF49DCF8FCFADF9EE72E9D943930F
-:107E60007EBA0BCEB9D77D5F113DB679EABECFEBB6
-:107E7000FFBD54EF3AE53D0CF22E1791647D17E8F3
-:107E8000876DAAD50E37CF99057EAD4D3F9481FF02
-:107E9000D5FB3E7CE76E9B8FF7372B53F7CF70F502
-:107EA0001F638DBF10FBBBE149EA1FD88FD1FEF2E3
-:107EB0009F3D167CA8BF1E125DE3E558F3DF88E303
-:107EC000597EF7456DEDABA60C7C1A2F87FD53CF7D
-:107ED0006DC480EF4F3C2E877C213BDF6A8C5FAB0B
-:107EE0002E5CEAA0772FDEC739EEBFD71074D4EB33
-:107EF000DE11ADC33AED8B3CFE54453D737C6FCF34
-:107F000048479DEEDFE0F8A4705C9D068E6BBE6076
-:107F1000388A1CF2D90B47B1E3FE278563A1C6F46A
-:107F2000D7727E9DABB373B3730D21D4446FCDA5CF
-:107F3000F7BD94D7BF4CAF1ABDCE9589E9C7EFA264
-:107F400026587FDA86FDFD0D7FBEF7DD6B315115BA
-:107F500074D41548BCCEDBAD77E09C37AB77D31C2F
-:107F6000DF87B3AE3E89D56BBAEF7FE86378F9C699
-:107F7000E5D504FC69EAABA73CB7B6CB2FF0EF7DA3
-:107F80000645479C9BB7AD3ADFCF0A2E3983CDF724
-:107F90008DCBAF2710D79573537FDFEEA09FC1DF46
-:107FA000A285B14E3CA6F7FF5D9A4F0ACFF0243C64
-:107FB000D7209EA43478AAB5E0D1595EB025F8F94F
-:107FC000C0539261D1AD7FFC6CE570930B97201F7D
-:107FD000499C4E2DB07F4BD1DFCA7FB4689F2FFCE8
-:107FE000E141D2F7B98C2F86BE8B0649DF622E079E
-:107FF0002DFAE70BCFAD8384E73A8BDF8261A4D7FC
-:10800000E705CF570609CF318B5EC6E78B9FD62495
-:10801000FFF70FCF5F38DCF9192C0ED252C2CE9386
-:10802000F8A4C88345C2C072E12B76EEB3B5429F77
-:10803000B3CEE65D67DD57BA75FE9AAF339D3CADB2
-:1080400054127940BF630D2C1EF006DF9FFCBAAAC4
-:108050002913E3F3AE795A82FB32FB8BDBFCF72A60
-:10806000E7B9DC81E4785206CBFFDC1875BEB77C3B
-:108070004586AB8ECCC47E16FED28DF7D782B73044
-:1080800024310781378AAFACA27EF60D9F35BED270
-:10809000C9DD50F115D38786AF81E4FD2B43C4972A
-:1080A00025AF7FADF8CA077C4DFF1B7F0D165F8B98
-:1080B000FE268F43C2D7AD439547EED7FEB5E26BA0
-:1080C000B0F2E8DEB7D1FD5DA8BFEF0B7CD6F87348
-:1080D000CFFF69F1688DB732CD3E2F1D3E0782C3B9
-:1080E000BA7EE81B245EDDFBCF2F1AAFAEF93F3519
-:1080F0005EF97843C6EB007058577990F26DF975C8
-:108100006D6AEAEF888ECB64DF711B2FD41E990F46
-:10811000F9E3BF93303F7D64CF9C0DF67AA071994F
-:10812000CCDF3E52397B03C44FCF4532B0F6ECA8CA
-:1081300018FAF934C82B2F62EFB9C73FC2F1E5C96D
-:10814000CCB6E2BF7940D7A391C5FDCA23A9B4AD8F
-:108150000BF34636FA4A7DF17D8418DBA7411E6297
-:10816000416A382C3AA79B77A8F43D1A797C48FAE3
-:1081700067A0F5FE877FCC20F54F02FBE592E4DF98
-:10818000DDB90CF0D926B27AB8E370AB00BEEB468D
-:10819000B0D3F215F97B814E7767B2FC61876A6CC8
-:1081A00080FC8967F182073229DD8E2ECD16ECE73F
-:1081B0002FE764B2FDD78C55A9F75D0B391FF4BECC
-:1081C0002F90F129F83BCCFB2D5DC5BE3F46E4F076
-:1081D000A845B673A7EB5DCFFBD0233380701C4D51
-:1081E00073EE7F017F7FF992FEDF27B5ECFB3E94B3
-:1081F000EF46D9CFBD26F98CCBC7197F746926BD50
-:10820000BE2144BF731FF0D1043F3B37249322A803
-:10821000BFB2C6C99549A74AF1FEAE628C82BC6660
-:108220008A716ECE9C9E7E9C7478B5D663CD03A277
-:1082300008DFE999ABB138E2B43021B3207EE80918
-:10824000DDCDF2878C0F72781DE2CCDA8C4423EC02
-:108250007B65BA4E1BBC1DFF77F67F83E71D474445
-:108260001DCFB7BBF030907E68CA64F9E45C29BAD0
-:10827000C90B7993D542CAEFD86DCC647FEF6852B1
-:1082800066B25E0AE719B733AAC0F72F96C92CFF6A
-:10829000454874D442DBFC9338BFB9DFCB9558BD59
-:1082A000117993C973DBBE75A352C9CF2FB89C4E09
-:1082B000CA2C71D4392E89DCAD807C2E59B0503156
-:1082C000FCF0DCC0F1977238DAD4E8A829FE5E3CF5
-:1082D000A5D5431C3F1DC7A24DF0DD8FD5F502D6B5
-:1082E00009946E647CB77AE3417103BDEEE5F2B7A1
-:1082F0001068601BEFBB9CAE6DFB7CA301FEB664F7
-:10830000FE860E4CE1B87937C17CC893DB4FB7408D
-:108310003EA45B203C7F726325D43574F3FAB69794
-:10832000E9F346C0DF9C3C94EF711B3FAC03FDDCDE
-:10833000A1123C2FF3BB2D9E049C27B0F825A92742
-:10834000369E6F80FAE147D4CE89C037794DB5F7B4
-:10835000A5CA9FBEC4E9F0477F242B951F685D2DF9
-:108360007D6EF55B241B4AAAFE8B2B5D768DC33D8B
-:10837000CCD37986A4C86326F930D1BF9FF64BAE23
-:10838000C77FE1CAF32E39963ACEF82BCEBF6D895E
-:108390008AF568B74C0F9E43B1E0B1F0956B323C63
-:1083A0002D5B2239F4EDEA05192EBF87E1F5068F22
-:1083B000F128ACE3917D3F9D88E7A85CF6C1274595
-:1083C00055787E07E954404FBC2F19787DA3C1F939
-:1083D000775EDE20D1EDD3C17ED64B29E5EA8F9CB6
-:1083E0007FDE5871CB52843F26E900FF8955C3AE2A
-:1083F0002F03FDB24209C177D34FC4EECDBCCDB639
-:10840000FEA45FE382EBD755B7F46BB796AF70D29B
-:10841000AD4D657E81791D93C33B298FCE42FEEA27
-:10842000DE3E93CE7F249133652BEB4EE0EF4C2D57
-:10843000E6BFBF2F4677CCA4FAE694C8F224E657ED
-:1084400098DE58B233D20CA9D353F557BCD44DFBA8
-:1084500079038CEF7E5BDFBF7D74F3D3B89D4E7FD5
-:108460006FC631A2C2FBD1BAD4F6E0DB7A06FF7B3D
-:1084700062A1D1A05F6EDA98BADFFF0266A6F09C17
-:10848000FA8B54952A3E7995CEE05D1D49FDFE5547
-:108490007A267B0E7629059ECF0532B89ED3478378
-:1084A0009E5E9D06DE0F030184F79DE6FB6F823A18
-:1084B00090F75DDF817F27C0F8E26080F1F7A97D4A
-:1084C0002B953CA0538BA0033FBC9D1D9A00FCB68E
-:1084D000267602CFBB1CE0787ED3179912980EF255
-:1084E000B2686E1EA54BC72A12128CF4FAFFCA009E
-:1084F000F31B7279BC96DABF77C1FED157DF45FF17
-:10850000430E8FBE71222B81823AF053A2B90EEB3B
-:108510000CF7F9585D29094DB7FBF15FE6709CDA5D
-:108520003F347A2F8DB8FCA03EFE5FBC1AE7DD9F7A
-:10853000A1435DCA914AA9F35A0AE4C9FD19F87D1D
-:108540005CB75CA49B7FA87EE0A9FD43F303075AB8
-:10855000F78640D1A0FCC073958FEC980672A4C634
-:1085600027A5D2BF969E3ECAE3EF6EFEB1AE5FE591
-:108570007CF47EA27FB8EED8ED84E7A65A273C961D
-:10858000BCBC9F68F2AD013C91CE8976BF94CC997A
-:108590003E809D65F9A974706E77E909E03CA0C33F
-:1085A0009D5CDFFCB6FE91809D0EEEF59F12F9FEFC
-:1085B000E05156973B36B2A622CFE8E5CF6F7D4E0D
-:1085C0007C69D919F738FFD9F9D0B27303F1616E1C
-:1085D0009A3CCE2438E84CDF5F23EB2AE4EB2705F6
-:1085E0000CD626FA3C38AA45CA78DD283146C3F9AC
-:1085F000AF53FB7CF8F7A1CCAD9EC4582A02EFEF35
-:10860000BB7A827D3DBFE27CBA7A49367E7EE27DCE
-:1086100031343F1FEBCE24FC8EDB1BC772E641FBDF
-:1086200091C32268687253DD1A09D6F74680ED3B84
-:10863000576F7C1DFDC1A1F2F9EA5AA7FDBF8AAFB1
-:1086400023E967C93DD3807FD2E1E1358E87A591CB
-:108650008573413FDFB251407DFB1318872EE4162E
-:10866000398C7A9BC4987D241AC50735212760115F
-:10867000808F7FE0DFAD9223AAFD9CDC6DDBEE9F57
-:108680000BFEA15B5E5664313EAEC86276E14D5F83
-:10869000F40FA0EF2DFDFCB6507B309F76D918D09B
-:1086A000ADEF04A39C5AEBD9C8E1A27EDAB3F8FD82
-:1086B00062BE3ED2E3E237315EFD63C07F85867ED7
-:1086C00081CF43F53ED4453FEEC33A2A4BAE2C7FD3
-:1086D000C7FDFE3239EAF01B33B38A1CFEBBDB0F49
-:1086E000F99BBD48DDFF8AAC2FD65E5C9BF5D9D8DF
-:1086F0008B619CCFDC762329D72DEC3CC889631F86
-:10870000CD4D25D7914F08875B9EDFDFE763DF4DB7
-:10871000BE2613F54EEF7E2A3F01FB65B75CC07E97
-:108720000ABEFBF1C8BE9F4D84BADE13DBEFBF2942
-:10873000153D67E9CC6F22DDF98E78DEDA00C1FAEB
-:108740006F42E77BC236BEF55E525E06885F2E5BE7
-:108750007925EE27DF5879F5E835A57DF7157DFAFF
-:108760000BD17F580AF336F2FDF40E4FD5BE54FB01
-:10877000408ED7BE7162A77FBF746379336CA9370F
-:10878000655CF3A5688AF993FB9A8DA9E3710F7272
-:108790003D95DCD798745F43F1D1BD4A0A944DEB07
-:1087A000DDD7749B9FCFBEE677A4E7E73351FE5336
-:1087B000C3F73D8BBFD4E88E2B297CA7E8FEC70406
-:1087C000F911E97BC02FDF4ABD5F7B9CBFF7BB8DF2
-:1087D00043D457C79CFB9974F2F7BDCF48FEDAD457
-:1087E0009E51A0077EB7F7E3B7EE87F5ECF521BE03
-:1087F000DDE3447489EF2F7CC8B7967DEE5099FE77
-:10880000FFDDDF8DC0BF9BED960F42E2D75F459F36
-:108810001FDF274E81EF2CB6EDCBA84AB5CF59AF5D
-:108820000B3CBEE48CF710EEDF2DE5FCA6EF7BBA27
-:10883000D61E8F7E93EB2B2B0EF0BFB3989D5DB2AF
-:1088400060A10AF19EDB92F126829B15FDB2C2BDAA
-:10885000F0FD8B5FF2F35CE6DACC94E7E37EC3F1E4
-:108860003B501C62C52A679C60C982FEEDCDC9449D
-:10887000EABA2C8B9FD3CD3754FBD296185A5E6C34
-:10888000A0758ED007675F9692DA2F41BC631909F5
-:1088900029705D426A27FE98A2F2E4EEC508CF2F48
-:1088A000ADBF7FFCF1BD13ED7ECCFF0710F667274F
-:1088B00000800000000000001F8B08000000000086
-:1088C000000BDD7D0B7854459670DDBEFD4AD24924
-:1088D0003A9DEEBC091D020818620742001FD02114
-:1088E0004482B2DA810041519A87184948A2E2CA0B
-:1088F000FEBA438720467466C2AA8CBFE3B80D82D5
-:10890000EB286AA2D1418CD8A0F8D8D59DA0AE8B17
-:10891000B3E846C7415E4322A32BB3CB0CFF39A774
-:10892000AAD2F7DE744370C7FDF6FBE338D7BAB7B7
-:108930009EE77D4E9DAAB63915C63C8C7D5B73FBC8
-:108940005F4D628CFDABB579BCD3C1D859FC9B1E81
-:108950007DFECB3AC6221731F6E13A3B8BD8A01CFC
-:1089600036558563D4FB53AA8931E8E85FE1C14AF3
-:10897000190B2D50C33B94C1F5B2705CACB7785E57
-:108980006A30463FF2B9A04665113BA3BFB3F06F12
-:10899000CD9C245DF922A753F4D39A182C62EC885D
-:1089A0001CF7513EEE91307F2FFBBB488C7B247C23
-:1089B000EE716F7E04C61D131DE78666FDB8BD2CE3
-:1089C000B48AB9619C70A2734701C3FF8CD8264456
-:1089D000DBEF759A08AEEC48A689653076876C1B8C
-:1089E00067BC0F057C8DF56BCC7E8B161FB7A77A05
-:1089F00069FEB25C33473F4F6F8A938FCB9CF981FE
-:108A000064C68E6E4BF4133CA6258747C13C2BED04
-:108A10002CE480793EF8E4C59FB1118C2D13F8AF9A
-:108A2000097C6D41781C35F5DF938CEBFAC0E4DCF2
-:108A30000143951DF45BB4F0BB2B85C3EFE8F673DF
-:108A4000C3EFAE143ECF7955FAF9CD3F98A82B1B52
-:108A5000D7FBEF7F7BEF04ECF7DFFFF63B8BB6FF36
-:108A600005A77359243D5A5E52ABF8C34583C77DB1
-:108A700029D53A24B8BF6480E392D3F9D4BF5B65AB
-:108A8000CD1D31D655EEB453FDF981728B07E0B997
-:108A9000FC6EC5A74017339CBC9FE566E6EF80F9E6
-:108AA00030B337BF1AE0EE696DBE2310A39FFF23DA
-:108AB000E0FD8D23901A8BCFE4F363410FB2DE0209
-:108AC00073D012ABFEC25A3D7C7B19AB8A35FF1FB7
-:108AD0003B395F0E951EE5F8C6FA439DC7DD820E51
-:108AE000D36D91DF33155E9C807ECA2E605C437D22
-:108AF000E3B8F73BF5F8338E7FF4CF6A5D2C38BCD2
-:108B000026F83F1800FA89F93D99BE7FC0DA1B7735
-:108B1000137F27F9762018B62FFF09A09DAD9C7D05
-:108B2000C75BF09A25A614D0FA16070E5412BB9D07
-:108B300079B018F1FE6DD5833F2985A91DB5065B77
-:108B400093A1C1D1F58A2FE41D3CCE07B84E90A366
-:108B50001FA13CBD08FB639C6E67C2FF65333646B0
-:108B6000F5D7A3506177D9BC3B347CEB5EFBDD3A93
-:108B700056CCD853D6C0FA64783FFAEEAFD73094CB
-:108B8000792C4CF3FEC2E2BB85E0CD18F1FDA16D5E
-:108B90008EAD9BA05E6A0A97938CF9F203E335725F
-:108BA000C2ECA4F250F1F3611CFC5CA89C92EB8C2B
-:108BB000370E409EE6377786A34D4965ACCBEABDBC
-:108BC00009D7D33F3BC1B90D5038D7EABF1AE1F3FB
-:108BD000C10193A9A580BA35239DCEE343B0826B32
-:108BE0000AEE1F578AF2C7E24F80A954431B36157D
-:108BF000E868862384FD957E38E719C4CF83B536AF
-:108C0000AF8AFD4DF37EAA4279EE5536EF7AE8AF92
-:108C1000AC67C45E37F43F7F8EE264D07EE6EC51F1
-:108C20009E5E585FD25AE8270747B8B7AAC2CCD889
-:108C3000D3F89F97323E6180C55C45965F6C9B0977
-:108C4000F2609CA7CBE40050AF4C7BB1CD0EFDDEB3
-:108C5000D312C872A6C1D236DFD7661FC658468661
-:108C6000BF67BA8FB1D99BEFAFB25F01EB7C54B451
-:108C70000F3DD0E6CF63EC5553B04081EFCD9B77ED
-:108C80005499015EEE4239FE2B6DFECB613D57DDFE
-:108C9000B2630DF4BF25ED9FAACC38EFC572FC9EE0
-:108CA000AA8A9130FFCB65F95FEC385F77926C0F41
-:108CB000F39DC298654474FEE62C18DF25CB9F54C3
-:108CC000CD84F13F2E6FAE30C3F8C7D2FEBDAD6884
-:108CD0002C6393E7943BFD50EEDBFC1F5549809FCE
-:108CE0002E06740AE53F6C3E4DF377AB26DE7FE837
-:108CF0008F34BFB2C5A171F85D617F6AAB8275AF79
-:108D0000B6F7BE85E4DAB43664CF4091A4703AB1C8
-:108D10005B9AFDB9003BCBAEF2482E4DA79DD36BBD
-:108D20005E643CEAB181F218288FD794B378B96BAE
-:108D30003D5B124BDE76BAB81EEE4A8CFDBD228D2D
-:108D4000CB03801BE993D483CCBF33865E1997E6AF
-:108D5000A07EF627B290DD15E5B76B8187A7005F8F
-:108D6000323B9FA7EC6790FE48E3729F85AE75216A
-:108D7000DFCCC12E60E9853E258474CD9A93C2A3D1
-:108D8000907658C43C0FF5876AA2F97A5465493544
-:108D9000F49791C8829DF0F4A4332A437B7FA723E4
-:108DA000DADF7B82EE2B0B03DBB1BFCACCEC92D6B1
-:108DB00082683F30EF0DF609BA799BA7B8F0FBDC6B
-:108DC000925B8B34F02CE2EB003AA07630CC33D3BC
-:108DD000810FBA7AC68DD804F3FB06E5AE27BAAE8A
-:108DE000B29EB91606F5B6B8843CF1F2F69E0A2E8C
-:108DF0007FFA6F4D0A6F43FEB4FB4A104FB2DD0D90
-:108E000002EE15F7CEF919D66BE8B1301BD45BD35F
-:108E1000599EC9CEA1171B4E5FC6C213356573C4D8
-:108E20008A72A7E1F4347A5F71EF7B56E453ECC7A2
-:108E30000BEB5A93E0CFF421DC5A63E39FB1169A0F
-:108E400047C3E934169AA87DCFE114EDDF4DDFCF9B
-:108E5000B7AE687F2A0BA79FAB3F2B7D1F80BB5906
-:108E6000C0DD1A7B9E1B04FD20BC4D1AFA9A2FE828
-:108E70000DA49F1FE5E1A16B8AB6A1BC8F8EBB9E9E
-:108E8000FAEF32031ED10EEC49F4A25D5C66E6F205
-:108E9000B3ACC7E50C2951FA907421F1DAE56A2EDA
-:108EA000A7F5562BCE6D0583E775BF9C97D0A79984
-:108EB0008B83EA52CDFC243F40FF5DA2FFD229C440
-:108EC0003FBFE0F4027C7303F22FDA2DB80E5F642B
-:108ED000FCDCE4C1F33F0DE4854FC02387FF5F391D
-:108EE000C2A80724DC06C33FF73CF8CCA7EF653DDA
-:108EF000FBACB8CE86387CFB802B85DA651E8CA453
-:108F000078A1DE19617774754C4CB80CF9628E89C2
-:108F1000A108C375A3BD5A36206FAF7C7706C8DBA6
-:108F2000CC8132C85B2FE26140FE46ECF668FD1F43
-:108F3000B9AE9CBD01E4B5DB06F82F223BD4CE349C
-:108F4000FEC4EE346EBF4D09B29876CBDFB9927590
-:108F500072ECFFAEAD60BF85F599D3B8DE9FD21B32
-:108F600052102F92AF8D72EA13C18F1F8BE7FFBC97
-:108F70009C52CE23A7AA859CE2EFF783998FF53206
-:108F80003222E315D089CBDE9D380AFD99DBB2543D
-:108F9000EF97C057F314DFB067A1DF1ABBF79E64E9
-:108FA0006F944E6A98DDEB40B883D17416F5FE9C41
-:108FB000042AE31FDA25A7DA154E87CC9B5A333EE5
-:108FC000BE1C92F3B82DCB4AE32DBB6F546A503BC5
-:108FD0003FA127AEB5459E658583F95C9661FEABE2
-:108FE0004DAAE6BB83EBB3B1C9FE6FD2D00E555884
-:108FF0002DCDC7602F3904DF19EDA587B16F0FFDA7
-:109000002F62233E3691739AD9660B33DE24847E19
-:109010006A660713FC1A313568E8C0EECAA3792CDA
-:109020005E081F2F01A6B4BF71C9971A3E7A07E7E1
-:10903000437A213209F934C1C57476DE623590A7CE
-:10904000A0DD9A69F3A19C013C111CF62730730244
-:109050008CFB363C116F95EAAD7B2D6EA403C5D712
-:109060004AD0DF2AFC5616417D73EDF424B25BD959
-:1090700099DB4756033C3C499C6EA11FBBE8C74E99
-:109080007422E4DEAFF3C76E43FD24E5A7C4033BBF
-:10909000A3527FF2FB7EA53ACF09E5FD9E8B4A5A8B
-:1090A00015BDFD83F650D47E4ABF6F16F0E3E4AAE7
-:1090B0008E880958A825E4997D27D4AF4CE26B1E11
-:1090C000E9E27A707F41484DC1FE46C13AE0D55B86
-:1090D00089C1A26647141F60E304117F1956783ACC
-:1090E000387FE0739F8BF3D99C748E942DE9BC9CE0
-:1090F00091C2EB1BE9ED49F17D95C2F1BBA99CCB77
-:109100000963BDE92EDEDF6A7BA82A6384D6BE0A26
-:1091100030A44333E37696DF25E8A482C3ABE2DED6
-:10912000C5A9A837BFED999FCA8AA272F41E25E887
-:10913000F441FD7B2C819F52BCE35F5486FE883551
-:109140002DE87441BDF4A4D8FEF24D621EE9E84F4B
-:1091500043BD9F087FC772FA62F2B317BAB83C4B9F
-:10916000C9AA21798E30F4A29FC2FA434E0DFE5255
-:10917000A798747E83E57431B5BF70BBA1248EDDE2
-:1091800050AAB31BE4B846FBE1D37559347FD9FE2E
-:1091900086AC8F2A99A6FE8DACF71EECEFC635B9CA
-:1091A000BA38513CBBE32E011FB4134231E765D5F9
-:1091B000BDFF14FCC49076FC237CFCE8B849C06871
-:1091C000D171FD2EFFDD2EE2A7CB9D872F864702B2
-:1091D000BC5749DF90DC07BDE4DFEA207D5485F20F
-:1091E0005AFA47C8F7CE54A4F1F20DAE491AFD2839
-:1091F000DA19E5D09F453CE3CF4E6EFFA51E94F6ED
-:1092000062A25751A2FA66B0BE127AC62017CF6783
-:109210005F03BD86B4FADFD8EF53AEEF6B5716C6C7
-:10922000A18FD1FF237665D9E541753CCACD2A854A
-:109230008D82C7E4997A3DDFEDE2FE47B72B49A75F
-:10924000E7E72ED6D78B60BD49F84C1A92BFA2D55E
-:10925000438A8AF28EF7D728E8A1E0D807562FC8AC
-:10926000DFFF1276D017E9FEB791AE3624A614A31D
-:109270007ED8FAA78A315B61DEFDEF5B7CDBB0BB99
-:109280005D9C3ECA17AD6935C37B4B87E2B4318D17
-:10929000DE5ADB79C90A58EF0792FEDD7C1D0DEE20
-:1092A0008875248C9BD3C0C7CFEBD8AB9835F22DF3
-:1092B000AF8ED73BE4B2E8F45EAF287F26FD0F16F1
-:1092C0006EA92CC5FA7EF326107D391D0AC583735D
-:1092D0009A01004007393EDEBFC31756961745D79F
-:1092E000D966AA2E42BDD09691E443BD30D61D3C2E
-:1092F0008CF4DF70281241304D3ED46346FBAEC281
-:10930000EDFF0ADFCB757A55670ECAD5A4437C7E84
-:10931000ED067A070B59D0F9362E6F55F60E437CC1
-:10932000A0EC80F132D68F21BD24EB67B8849EC8B3
-:1093300060C117C8AE626D8CF0C5681D19EB47930C
-:109340007D2FF119B5A3C64E403BAAF0818879194B
-:10935000B4DBFD58ECF8BC45E81158074BF744D78F
-:10936000118F2FA41E93F52C71FC6849EF4955B15C
-:10937000ED53D000F4BD7C91FB3A5C77C3062BB370
-:109380002951F857B803E9389F9C8EAD0AC246D2DE
-:10939000D706D7D34A2EACEFF65B985365F1E7DBDF
-:1093A000B0F6C54B5668FC2DE89FF0B1D5CAEAB4BB
-:1093B000FA54FA1317A773FD73A73B3002C76DDC8D
-:1093C000B5D98AF8BD65FBE7566DBC7BD03A8608F7
-:1093D0002FA58EFB290DB5F630AEB37C9199F057D1
-:1093E000BFC11A4679D4B0B33362427BFA6EE6430A
-:1093F0007E6FE8E87C2B07E092DBE09FA47AA3FD78
-:10940000E53684159C4F0610610FF979112BEA6738
-:10941000235DA33D8C76C95B099CDF4F943B420AD8
-:10942000C0EF8425D880F54E6427F942055178BFF6
-:10943000DD39EB1D05583AF9055B049F6DA66D59A2
-:1094400076A8D736CEEA433AAA700767A5037C5CB4
-:10945000E64017B64F7327FB5AA0ADD7C626907EBD
-:109460001E221C261BE861F2DD9C4FFE263D45DADC
-:109470007B13500E2D4D4F96F612C9A7B72C7C1DAD
-:109480001B189FEF3E977F01D1ABD345E3E63444F1
-:1094900014B4F78DE346E9C9BFF842E81BEC3C2B56
-:1094A000CAF57A2167CA176D577EABA1837A3064FB
-:1094B000905E72766E55D00F84EF2D956EAACF6CAC
-:1094C000286776F2FD887AF87E9346AEC875C49018
-:1094D0002FB7217C1D877ADEE4F22542F427E76B63
-:1094E000C4E78FD2B91D77259805F4DE1A1AE385F3
-:1094F000FEDE1A9148FD497E37F2E78F049DE7D4DE
-:109500006E57306EE04EE276A39C9FACF745FA8C26
-:10951000F5389FC9553D0487D5B566C29B9C4FA5BC
-:10952000353012FDAF76D1DFBE859F597BA1FCD0CF
-:10953000AF0E103DAE6E57FCE417B41FB0CEC7F8A7
-:109540005CE8972AC663AFE62609DBF2D201D22394
-:109550005777F138C1EAAE4EF37247944E0B8EED59
-:10956000BB11E96C75878D2528883FBE5E239D82DF
-:109570007C21BA67212BED67817C0C913C65C1028F
-:10958000F447A4FCDD27EC4BE6E0EF9F10F396FDDB
-:1095900046E56602D17BC1B109FBEC00CFD53EC5E3
-:1095A00007A612D8DBBC1EF41F21F9CBD808F4CBD8
-:1095B00064FF46F8FD5AC8D518787E3E3D861E9158
-:1095C0007AB5E0F1190C9F127F660177D9EF9E748E
-:1095D000BE9FB527DD4CFD6F28E7F1EB0D16AE3FC2
-:1095E00036B4D8C3C8D76FA75DF98E520C707259C4
-:1095F00023F8DC6F5AD680DFF7E7F079B499D68F7D
-:1096000069E6FAEBF574C25F0AE3F289CBA3875EE1
-:10961000E4F2A421E4203FB12158B382F61FDC0913
-:109620003EB4F759F04DEBFCE4283D18F1EB7D61B9
-:10963000AFD50BDFAFEEE07C10855B5847B720E776
-:1096400008EFFB5C723F2258807005FFBD05E30CFC
-:10965000D27F4F591C08257B07F36BBAF0DF27092F
-:10966000FFDD32C5FE17F5DFEBD7FE5336965765A3
-:10967000BD4B4FC92FE027EAF8EA84F0DB0E08BCA7
-:10968000FF41D04B7D6907F143FD97CDC4478E2A3A
-:109690002E4F1C87F47290B11F8BF53F40FD54266E
-:1096A000755CA9A23FFCF78AB395C59FF7CD4AF335
-:1096B0003F4F45BC74AAB42FC5CE80555F06704D90
-:1096C000103010F52C6E1EF73EF1142002F9D2DC9A
-:1096D0006C3D97FD7BBE7E59E42305F15D2F607DD7
-:1096E0006267C5D4DF613CF1A954DF2858FAF19DC7
-:1096F000F3FEE677D0FEC4F6E93ED4D3EED600D131
-:109700004FBF27C1877143B70A962DD0434BC71B64
-:109710002997E1BED833974C40B999E7E67C79ECBC
-:1097200045752DC267FD3F3C3F0DBFD7879574B48B
-:109730001B4F3CF5F77F46BD58B7BD093D0DD6FA26
-:10974000CCEB64879BC25BF9FBA752C9BE3CFAC451
-:10975000E66908F7D68E56FA7EEC89AD54DEF70F2F
-:10976000CFEFF94FB43702293EAC77ECC5CD3FFAC5
-:109770004FA4F39A141FAEA32168E6FBB692BE8DE8
-:1097800072AB732FF1A9A497AB51EF229C6AB9FC7D
-:1097900091F4FC85D8575A56E1684379F6C5A6E49A
-:1097A000BA58F144BF582FC65C488ED52A144F6B67
-:1097B00003AAC1B8465B229B82CFA4A2883517C6F4
-:1097C00059B8B8731AD93DA1CF5762FD79BB12D8E9
-:1097D000268ABF61F016EC7F2275C6C683183C0C42
-:1097E0007E32F4BEFD2CD8D71F5B309643FDE9ECEA
-:1097F000FF796DEFFE11E5688DBD77AFC71B7DDF8B
-:1098000026E234509FF44ED99AD8F1D02AB743D0EB
-:109810002DD79B395DD5795E921336DF288D5D3A61
-:10982000EC60F32610432CA7AEE74A5CC75563965D
-:109830004E24BAC0381FEA9F9083FA5F8D714AE0C8
-:10984000B3456ECE4F194EE6BE14C6AF3433B703E0
-:109850009F8C7D642139B283FA05FB83EC2AEFEB00
-:109860000B77A03DB2C512CC9E84FDB409BDB59D59
-:10987000CF1BDA3B71BF14FA735E3A81FAE9B1B8D3
-:10988000A87D88B79FB5BD4589CE1728351FF51629
-:10989000F657EA403D13AA25FC78ADB4AE635825CF
-:1098A0009BD65D7CC3F828FF1AE33B28CF701FF8D6
-:1098B0004E77F96DEE49D1A78CFB18E1F9327E871E
-:1098C000757FEBF6D3933D95AED32BF1EC957D0BE5
-:1098D0004F72FDFBEAE7246F1A918E71FCE0973A14
-:1098E000FDBB5CD2F12B9F131D2FDFC5F56FE3AEDF
-:1098F000122BD2EDF1757EF65B30401BC53EEB16A8
-:10990000A57725C5795E497062FCEEA4D037F50FC6
-:109910007C7E18F74747ECCA26BFFEE42B09B5D872
-:10992000CF7E9389E0B97FDBC55B5B15ED3CB93F2A
-:10993000007630916A23D8A9DC0E5EB119FDB3D54B
-:1099400075CC87FCDF68A09FC65D07885EA41D5CA0
-:10995000F0F8DC15DCFE4CF025A0FF3693DBA30C01
-:10996000EC51AC9F3633DC6225FA2A2943FADAB788
-:1099700070CF46D4E38D339913FBDF32CCFF4A2EF0
-:10998000AD476198CFB2C5D23EC30CEDB7547A9DB6
-:10999000004980DB76B27BD918ABD0732BC85E6EE2
-:1099A000CCBADE477C669407AFB490DDD5E84DA411
-:1099B000F95CBD4BB98DDB230EC6E7AF107D5E1D94
-:1099C000BE2C8CFBCABF17F093703C69E9B911E15A
-:1099D00071F2252044F87EF54C4EAF69333B488E3A
-:1099E000BCFDCA2CD2E3922E935FB6913E77999D2F
-:1099F0008A8FF4DA3C9B16AFED16AE97D2849E297F
-:109A00007C80E33722F82922F440C46DD5C75B9CE3
-:109A1000A162D4BBBF17F8273182F25DC893D52B62
-:109A200022C44F0D3B797F6E9BBFE4760DFDBA2BB0
-:109A3000B85E94717FDC07A88E212F7EE7E6FAB12D
-:109A4000E0F1659BD15EBE0AF08E2A25678C90A35B
-:109A5000401708B79CBA00D1C155EE9B7D6A01ED55
-:109A60001F909FD8DF6265B1E23C47851CF5A407D3
-:109A70004A31DEECC94C263BC7A3969B12B05D89E8
-:109A8000E2DBE6A5FD4DB2F3FA3DD9BE6D3A7E0F9D
-:109A9000949AA0DE918C648EE7F0AFCD73C7231F3C
-:109AA0007AA59FAEB3FB06FBDBDC6E9CD31E2A4679
-:109AB0003F44EE5F4838845B126BB5F2B34FC02170
-:109AC0003C96C7F3C1BE7750FCDA09E3A05FBFED57
-:109AD000B227B85FDF4AE31F74F3784625AC0FED79
-:109AE000364F61600DD7A7C9BE58F0B853E079DF93
-:109AF000C21B4BD0AF6CAC71F890DF1E7A55594643
-:109B0000F48CC141F4B7832B080F0CF080FCC082A9
-:109B1000DC2F6D6C0E8463D37B35F15F23F29F42A3
-:109B2000F44EF176A0F730A777AEFFA4DF8FF2B145
-:109B30003AC67EA8942F8DD6DED148C7921F1AA7A9
-:109B4000F58E46B80D559E9CB400FF23FF001C9077
-:109B50007F24BF24EFE67CB2A9C55B8EDF37553288
-:109B600067AB461F19FD259C27FA9D52AE8F7507DE
-:109B70000A3D1807304536621E8594C38DBBEF1B26
-:109B80001D2BCF4DCA61BB99CB377B3829DCAAA1ED
-:109B90002FDCDB4B9E404FCADB495A1B3B2E52E663
-:109BA000718878FDD0F222325097A3BCD996144622
-:109BB0007925E344C67EC778145D3C46FA2DB8BFCC
-:109BC00080F5E77A38BD547AB89CB85E3CE5FC2550
-:109BD000FD7B4DC1CF319F289EFE92EDFE52712B31
-:109BE000398ED4A346FCCBFD115C4F7551FC7AED48
-:109BF0007BB97C32D2E372C1275E5C2BD47B4EEC06
-:109C0000670DC62FEF87D59A75F96F6DA6CEBA5836
-:109C1000F12FB9BFC11E320F29BF6EEF3A9E47F533
-:109C20009CC8A7658BCDBA7C2A87CFDB82F1D3197C
-:109C3000F6821295C6E571ACE469EC6BD4C3C5BB82
-:109C4000DAC7609E9227A0DF1FC9AC4DD4ED3F64F8
-:109C5000075DBA726E5D8EAEFEB0E611BAEFC3D785
-:109C60008ED37D2F084DD0950BDB2ED5D51FD53E3D
-:109C7000439F8FFBC855BAFA63C37375E54D2D1D1D
-:109C8000B588978B9FBA4ED76E86D9692E01B88E4C
-:109C9000EF58A6CF1333C033F5CF6A4C3A7CD2537A
-:109CA00040789D61D6E70B5FB24B0F0F4C8BC3FE24
-:109CB0008A99E86FDA9109E7CA632D66E66F7A65DB
-:109CC000FB82C1F4C0ECBDBE400C3F53D2B92C1B8B
-:109CD000F7B1A4FCB850FA8B374F497FF1BEC78368
-:109CE000DBBB1EB90FC3E16219804BADEF5C70B1F5
-:109CF0009C0F2E0CE092FCFDE162EC6F7D5223E59F
-:109D0000037F84058D7DDC2BF84896178452B91E9D
-:109D10000ACC3B8F1DCDE3C0411BDF9F347EB7676C
-:109D200070B9361AE640F019225F7F26F070281EBF
-:109D30005FAFFD7A7F26CAEF2A467EB3B3B9E56BE3
-:109D4000D45B4BCC1186F4FF9058CF169117FAC80C
-:109D50003A27F5F3A8D87F7C6C9D97DE3FBE6E0C4A
-:109D60003DC3EB7CF47EDBBA29F4DC0EF61C3E9F8F
-:109D70005C5745CFA7D605A8DED3EB6AE9B9735D7A
-:109D800090CF6B10BE5819D93981F498F1D2A52122
-:109D9000754878626A5E4C7D19B71F75F139F3C852
-:109DA000D71E5A34FB4D0DFF666524BB0F630EE3CF
-:109DB000643619F733CFD7FEBB75B5B3DF1C3574E6
-:109DC0003E92F4C4CEA48F8EC5D741913FF9BB8794
-:109DD000CF6E0A15C5875794CE62C3A9C67E3207D7
-:109DE0009DF562B41934ED0F1AF8B826981AD36E9F
-:109DF000A811F4596BE3FBEF8B0CFCFD92F8FE52BB
-:109E000006D7779FC49133576798A43F6FA1FDC0D1
-:109E1000417CF7932B62C1777F8657C7C78B820639
-:109E2000BC1AFAF9C4D23ECC1783CFCED78F5C9F31
-:109E3000B1DDC3195C6EBDF8FF297F7E725332F924
-:109E40000F08378F66FD9FDC94541B2B2EF35A06A8
-:109E5000DF0705EB9C15B8C8D40F59D1561CC3BCFD
-:109E60007C9F77A413E343320F203EBD9A298E4492
-:109E7000305407C315F0E1B51642FFE68171226642
-:109E80001CC7678AEA59CCA9619A731EEA607A8076
-:109E9000F6212BE5EFF4E6D0BEFF05D213531F1BCE
-:109EA00075AE7DBA41ED2F50CEECF881E58CE473B0
-:109EB00076E6C151B1F4642D8E7D29AC63CBD4FB21
-:109EC00049CE9CA7DF0B855FADDA4BFBD64386DF1F
-:109ED0002EF790E2526BED29C50CFCBAEF12F83365
-:109EE0003483F1F3589F2584D1CE3F20E6098EFFBD
-:109EF00025DCAF6E9E8CCF7FCE0A7C9801ED975902
-:109F0000B99F383EC3FF119613C53EB035D3BA1181
-:109F10009FCCC9D7718958C74693371FD7F1A5E29F
-:109F20001B8B7E8AD314F6E1338545C6F3BCBB7028
-:109F300010FDB3F48B13BDE8DF268E66AC87E2E13B
-:109F4000BE048C9B5993FAFF7124F2FBEB268C30F4
-:109F5000B2E79D7CBECF3F924BFB2AE801A17C2853
-:109F6000C6F730F54D688743FB6B59F018CEEFA864
-:109F7000D31E32C1BC8A677FE1C27CA8E7BB67D031
-:109F80003E42E4293564C5730B3D27FEEE6AE8EFD7
-:109F9000921E0BC59B2F612AC9F37A337B00F926E9
-:109FA0001E3C8FFF75ECFCAE2B32B9DC93795BC69F
-:109FB000EF79E2FBF13879C48E4CAE17647E8C45A4
-:109FC000E6C778FCE7CC8FB118F2632CE600C37DBE
-:109FD00060CB407ECC6246F931D08F363FE6F88CBC
-:109FE000D8F3708B79584E27C5E93785DE1F1F716E
-:109FF000EE755A4E27E8F2ACA3ED1DF43E5E7ECE20
-:10A000007831FEF138F9496307FACF66A1746D3BE8
-:10A010002F9FF7C03879F4DD62C8F3897EE7F93DF8
-:10A020001BD2389DECCD72BA9742D74B59AF05E998
-:10A030007489C36DC1F85180F93AE9DC8ED9D2DF59
-:10A040002BF96E04D6337F8176B609242DDAD94BED
-:10A05000D65ABEE8D5C8A96ABFBECCB0BE46EE6E21
-:10A06000CA6234DFC4716328AFEF14F3A63ACF217C
-:10A070003717DB55BB59B3DE4371EC865B05FC0E2D
-:10A0800065C786DF7599DCEE88771EE2D6CC14DDD5
-:10A0900039BDDB9DE7969708DF60BAB67F231EDCEB
-:10A0A000F4FD7C70F6E0E61AC6D1CA159EBFFF1714
-:10A0B00087779A3857C5CF05580C79E89BB2B8FC1A
-:10A0C0008BCE9BE7A17FE40CDC9E8972D1EC1DADA9
-:10A0D0003D07D065F6274D80E72121778C70D99D0B
-:10A0E000C9ED37E3BABB443E7DA2CA9A3B35F0378F
-:10A0F000AEF73941E7B2FE060BDFBF82BF801DF02D
-:10A100007203E372EFE1CC11222F3CCD8CF270315F
-:10A11000EF82DDE07C8BF693249C07C14FC0DD0805
-:10A12000C700F3DE8879DBE783674796FF6184CB5E
-:10A13000D203895694FF37DAFBF7A38FDADB63FA91
-:10A1400078243C3F778C3CBC9DE1FEDB9897F7C1BF
-:10A1500033658A8FE751B09964EF28A15CF5ECC5AF
-:10A1600043B77736A604C7207F7C29F2AEA53EDA36
-:10A1700098736C34E6CF7B5DE5ABB23C1477F7A700
-:10A18000231DBD66E374F408F404E5A63D63B7A29D
-:10A190009E79302B5887F5641E1FF3F78FC63C84D9
-:10A1A0000B8513FC59908ECE07A7273219E1E75093
-:10A1B0004A6C3AF94D1C3A31F2079D2F2BFDE1F81C
-:10A1C00043C253EE5BC8F9D565713A944F093763C2
-:10A1D000FE505D9649D4E3F9880F660508CE7DC32D
-:10A1E000BE3E9C00733F64C8F792CF93421E9D6FA2
-:10A1F000FD12DE3F941C3E94187B7EA6ACA1E1E7E5
-:10A20000879A5FBD9C5F71ECF965660D0D7E01D686
-:10A21000FF59DA0FA0C700CFF58867B6A19FE4E326
-:10A220002157EC79960D799E41CB0FA16F257DB317
-:10A23000D0D23ADAAFCF4A8CB95FBF00FC27F47FA7
-:10A240008CFBF6727F1EE407ADB7C6DE7F633AE291
-:10A250007DA65877068BA4E17EE61E1BC5FF8DEB1D
-:10A26000BF42D011C0AB82E035A79FE2188746C736
-:10A27000960B15C6FA6D7C9C78E70BAECE528674B1
-:10A28000BE80950629FE576E774454C0C36D021FE9
-:10A29000D6DC553EB40FCBB3DE3B88EB04F89F18F9
-:10A2A00080A7269FEFD8BA779C232DF1E576BDFADB
-:10A2B0004259738CF5043DC11BB3347E50FD53EFFE
-:10A2C0003A476AF0359EF59AF8F9E87E93CE2FCE9C
-:10A2D0006417E41757639F988FE00A903E40FD8013
-:10A2E0007A67E3EEA925884CB433309FA73F3991B4
-:10A2F000E4686BCEA563BC1A7886B2A47DA9C6B10A
-:10A300001BFF7BF9FF51BB49D1D9AFD1FECDF45E24
-:10A31000E2A7DCF18F31F111F4F8EF213DE6F26FA5
-:10A32000C4A7117EA17B2F4FA3F30508BFE9D1FE7F
-:10A3300006F01F07CF1D1E7F3BF6D720CED1283257
-:10A340008F6F205E61761EB647E13D54BC248A784B
-:10A350001AD80D8F211D586D821F9983CE874BBB54
-:10A360008519EC1B3686FBB73764BDF7478CF76C55
-:10A370004CE12CBBF14709E4072E519C565C37D8C1
-:10A380001F9FFE1CEA0759E4D3BBC83F9476469250
-:10A390007A3669E8F394FEF2F9F2A9F7A13D06F3E3
-:10A3A000996172D0FEE63E585F36C88D1956FE2C74
-:10A3B0009F055405FDCD50F3BA7B615EDFB2338952
-:10A3C00057C0F3A78CC361CD81DFB9D01F9D61B6A3
-:10A3D0001CD3CA2D63BCE38DAC6437E151C43BBED2
-:10A3E00065737E7D31C2E57217C1A5F8959999DA3A
-:10A3F00078CB40BC43AC635E682997A7063927E554
-:10A4000099C9CEEF11617EE6756650DC88C33DA424
-:10A41000303394AF90657452A07CB9409282ED6164
-:10A42000DD5788275B16CC423983693C381E787F1C
-:10A4300059F86C9DEAF3E273BA1230F3798479DE4D
-:10A44000216BCEC3FA267BAFCACFE7C10C32B0BDB9
-:10A450001C8F9793457943CDA91B6FF20E8E633005
-:10A460004732D9BD5631AFA34E47C804EF6D8EC8F1
-:10A4700051CA4F154F63BCE33B532884F9D977AADF
-:10A48000619A6F128B447A303E61071098288EF0E3
-:10A4900007E403F06E1A719E09CE5391BB18E6399A
-:10A4A000FA152CA71BF491C7B186F29E3D01B3416A
-:10A4B0000F0515E49BCC5AE37BBD7EB2B343741EFB
-:10A4C000488904B2CEA69F3F5E638CD35866701451
-:10A4D000F7DFC2EDDE8F13793B4917E9D95CFF3610
-:10A4E000BAAC8CF25D32EC76B4DB4F261FC12397F9
-:10A4F000A837DA506FD82D7E8287D41FABBB6E652C
-:10A50000889FC65DD50CE5E86F14BEFF19BA41A15E
-:10A510003C05796F436D117B1F5AB2A6EC1134CE06
-:10A52000FC7782373440B9E63D363E02F54AA6074D
-:10A530002AF17E96D6F1CCB71ECAAD09C1675FC2BB
-:10A54000F51C50A99F26712E963167FD4EE87FEBD2
-:10A5500075C37C9B704915FD1B310FA8FF3EE6C4F7
-:10A56000BC9141747A06D607F87F02CB30EFA6156E
-:10A57000C15FDC01F5B3DF633EAA23BEA32F82785F
-:10A5800053043DE0FBE9F0BE49D04D61B7C2F7EF9F
-:10A59000DD36CA9F600733895FE6DBF9384DDDE5BC
-:10A5A000D74E827915F64C24321E09F531BF093396
-:10A5B0000C787E1D237FD9587F24D6F752B48AE7C2
-:10A5C000D5E458E9FE2326E4DC6403BF5D16A57FCD
-:10A5D000FA5E22CA4D421FE9F804FB01FFDC5FC6A8
-:10A5E000B7F3A99D9BF3838FC93FCEB797B2E81FFE
-:10A5F000F65B111D87E4EF4CF16DFFA2D994D73DB6
-:10A60000D91CD98B7C7D9978968827F2B51DE0B846
-:10A61000D0DCBCDF03EB495BCB7C2D38CA626F2BEF
-:10A62000F657CA022AC2B9CC795F2BCE6FEAE20391
-:10A63000E9485F4F6617123D5D6EF715260089B435
-:10A640004EF1F99CF0AA76B14270995F6B0F63FEF0
-:10A65000DAFC81FB7A82050B806F160615718E3E3F
-:10A6600058B058138F95797D0B6CE047C7DA77CED9
-:10A67000E67A5CB66F12E74EE4F76DD90E9E5F99ED
-:10A680007D655336E557F07C67E0FBDBB22745E597
-:10A69000088C4BF928F398DF82EB9A27F856F2FDE5
-:10A6A0007CFFED64B7CE0FE8EDCFDF281CDFA145BE
-:10A6B0000AD9830B6BCF6D9FB664CBFDDE3C27C5FB
-:10A6C000B799D4479CAEA4DC9E8B7A1CE56D15E847
-:10A6D0006D8D7DBCF8CE3369D42EF3C9D56787471D
-:10A6E000CFB93419CEB9348A732E4DBB5A2C1948C0
-:10A6F000EFE29C4B53F7E71BB5F97D124E83CFB9C0
-:10A70000F4535EE3026B782F9EFF59B00AD608F52A
-:10A71000DF10E722DEC4731113A274947C5D4284BF
-:10A72000E7CDF9297F2FCF99E4C37C9336D304CAB0
-:10A73000176A4B49F669F37336B53457623D99276A
-:10A7400024CFB52C88B31FFC9C906B5B149EAF1577
-:10A750005A6427787B5476507B4EDF5318A03CB95F
-:10A76000A66C2F8DB345C41130AF74223CC3608EEC
-:10A77000717CF1F646F900FD6DC0FE2A0A7D941F3A
-:10A780005391CAF3CC3CE98192DB8AA2FDD674F3E3
-:10A79000BCBC9AC0D76FF1FCDAEA5284A7519E4B39
-:10A7A000FA32CA75A0BF7D488FDF99B8DE89CAF733
-:10A7B000C0A29BA0BFBEF7AD943FC7EEF62B1668B4
-:10A7C000F7E2BB4E1F9EA7DB501EA8AEA4EF663A71
-:10A7D000EF9751CB2236F85EFA9E751BE6EDD5B1A8
-:10A7E000762BF65767D05BAB1C6F5A913F576DB70E
-:10A7F00044E99161BEA1AF10055DC3CE41710F92D6
-:10A800003F522E19E9988DD4CB9F12296F412E709B
-:10A810007DB598EB39F6A482F19FBEE423AAF09FA0
-:10A8200049DE4D9242CA20E72775BF4DF6CA3490E3
-:10A830000FE89F29582EA6FA5406F93906F3472F38
-:10A840006389445F83EC0431AFD28179737B48CA5A
-:10A85000C5F2298CE17D06122F300ED1B3DCAF9BFF
-:10A8600084F7F0C0F33231EE9D267F5144413CB174
-:10A87000B0A910ED8820D93B46FBA7CCDE9C6487AD
-:10A88000F54D61ED241727EF7F93E424E0F92CCAFE
-:10A8900099D798C4B3CF8E72A61213FF547CEAF1F5
-:10A8A00034CBF19019E1342BCB888F9019E13ADB4E
-:10A8B0003B084F744EC01F074F7E2947985E8E1489
-:10A8C000B033FC5CF27D6FDD817EEFF9EC900F3DE3
-:10A8D000C1AC1C929F7A7B245E5E5D418EE382F266
-:10A8E000EAFA2CDC4FB894F5AEDCA90CA68B93FBEE
-:10A8F000D7AA591AFA9174B95BE4D92BAF8BBCDD96
-:10A90000D264D27351BDC8F15F264A97225D69F0C7
-:10A910007FC5AE84880AF45622DA5F8AF43021AA11
-:10A9200017232687D70AE36E547C6D6A0CBC67B880
-:10A93000BCA4FF269AFC2AD953CC978E7806BC4F2C
-:10A9400043784DB177B49A619E87ADBE9FA3BF5245
-:10A95000CEBC84F772837EA970D498913F2BEC46CD
-:10A96000FCFA09EF95CE41EF4DDF07EFC311EF522F
-:10A970007F0CC1FE04BC2FCC89B15F180FEFC1EF73
-:10A98000897723BE25DF7726382B1C18D7ADE3F94E
-:10A99000C413DF1FD98AE58CD50574CEA533CDF756
-:10A9A000067D6FE6DF4B7BFC2ADE9F58B806BE4370
-:10A9B000B9B3205081E5A6B50AC9CB491F055BB1E3
-:10A9C0003CF26EFEBD647DF31B780F595388B7DFF0
-:10A9D0007D7423DD2711DE28DA97B75760B9A98D7A
-:10A9E000B7FF2AD91E42FFBAEC60B815DF8F7D8011
-:10A9F000CF43DA75D3059D752A2FBC41EDDA79BBBB
-:10AA00009BDFB227927C1276DA34B1CEE98FF175F2
-:10AA1000BA7F7B559517E8F0A6FE9005E9E0B0A94E
-:10AA2000A18CE4651C7FAB5C69CFC3E72C900B8CD9
-:10AA3000F00DF43982E79B6E83211ECBE17686CC44
-:10AA4000D3C47CF16A0DBE1ECBE17127592FC3C55B
-:10AA5000785EF1A3C964B7CA3CD2C8CF98827100AE
-:10AA60005C23E9D73879A5B30A9B495FCE1A2EF348
-:10AA7000497BCDCB60DC92B37FB832967FFD8418E2
-:10AA8000F788C87F97EFEBC20526F43F3A9178E844
-:10AA90001EB3DAF7D12EE94C63BA7B423A0B78B990
-:10AAA000F3D19A1FB7E5017C4DCDE6100AFD7C85F8
-:10AAB000EE3DB9A68745525306CF7F96994578DE7D
-:10AAC000039FFFCA56EBB64D1A3B7DBE141B978FF2
-:10AAD000223D5223F024E5C57C812FE0EFDDC8DF65
-:10AAE0000BECCD64172E12F2FD1616A638C52D06F6
-:10AAF000FEAE777CF399C984F1303D1FAF86E970D3
-:10AB0000BDD0FFF82700FFBA47929DA8E75777E826
-:10AB1000EBD53DF2FE416E5FE9F9BC4EF27958CFBC
-:10AB2000E76038703EFFD938DA7F91E7FA12ECFD22
-:10AB30009F855874BD03FADDC07F0978CE6F0CFA8B
-:10AB40002D269E5F28CA72DC53ED5C0F87400F0BE9
-:10AB50003F8744EDA943B3C3480F25827F251F9744
-:10AB6000087D3E485F5719FD9887883F268A928462
-:10AB7000BBD4CFD00FE967796E10F4F2FB7EF2EF11
-:10AB8000C1FFC4798ED3F3CB2605E47341D45F01B2
-:10AB9000BC7D8D7803796CE7718A7686F22CAEDD08
-:10ABA000EF5813D3EE074947FB0083EDFD88CE8EA7
-:10ABB00037E22B9E5D3F80AF04B09792D08F67C481
-:10ABC0001FFF88CF21E475809C76E4C690D3D67DA4
-:10ABD000BC5EFFD6048A17C8F8B8E437258FDBD5EA
-:10ABE000EF66F95DB9B8FF20FA3F74EB2CDAAFFEDF
-:10ABF00086F969BF1AF38D7263E44BE07EF5064D6A
-:10AC00009CF4505AECB8F5F05CCEEF4B72F9BAC632
-:10AC10007BFC5E1CEF8895C7C58F248A670ADF57C7
-:10AC2000B83897C7B9978867B9781E1179D8475C43
-:10AC3000FA78BAAC5721C6F9729DDDBE412357BCE4
-:10AC40003FB335A3BEF2148ABCF5359C5EFB5E496A
-:10AC5000DBAABDAFED9ADCF22508474FA1DF9A8D44
-:10AC6000719657B85E6834F75A31BFE41A77702A84
-:10AC70007E6FF432FF0BD88FB7D73A0FE0DC27F6A0
-:10AC8000E9FB2CDCDFE84BE04F39AF6B72AB97E0B0
-:10AC90007AFB6EED25F93050AEEE25FEBF2637402B
-:10ACA000E3F6CD97DF45F9C7BCCC847F582EF882F8
-:10ACB000E2BC31E2BA83E3B8FAFB679AACB1F7972A
-:10ACC000595EB22E3E7B43378F1BDE68671B73E1F4
-:10ACD000FB92EE4CF21FEA5242A39D14C7FBEFC554
-:10ACE0005DFB86F5D0BA3695F7E73F5A4AFBB814B4
-:10ACF000F759DDFD36C9B9D5924FBAF47C522FF021
-:10AD00007BBEFD0F635C7C08FCB32616FFBC8CFA8F
-:10AD1000C91285FF6D220FA9526DA8C0B8D0A91520
-:10AD20008CCEBFDEF6AE4AF474DBB30ADD0721ED4C
-:10AD3000B3D502BEF1D683E707BC1AF981E707BC99
-:10AD40001AFF0CCF0F68CB787E405B1FCF0F68BF18
-:10AD5000E3F901ED773C3FA02D97B0E5AD18676BA7
-:10AD60006A63CEB0979F27D0B6C7F304DA329E2726
-:10AD7000D0B6C7F304DAF229C6E178EA3195E2F4F5
-:10AD800078AE40DBFEE677276621DD7425F03C32A5
-:10AD900016F2F714015C5608B8E079036D7FC753CB
-:10ADA000AE7C8701DDADE85939079F97EC5AA5EBDA
-:10ADB000AF5E6D203A64ED5CEE36C33F243FD52292
-:10ADC00015E7F1ED2E85A517E0FDE106FDD9BD796A
-:10ADD000238A9E5BC2FAF7F54C13AF2D181C977FA0
-:10ADE0003957E421E6B01C6D9C264A070E5F04D754
-:10ADF000FF91EA8B450725ECA2548ACFBCA362ECF5
-:10AE0000817DC59AB75CAE68E2F70678D8B2F4F4F3
-:10AE100090E0D5D343D2183D3D24FBF4F4903A455D
-:10AE20004F0F69FE71E7846F7A959E3E8CF09D020C
-:10AE3000FF207C27E0CD9018578275629CF72F0584
-:10AE4000DF2F72C5BE8780EFB7ECF20A87973ED737
-:10AE5000D8CBA2F649E93BCDB4496B8C7B4A384A42
-:10AE60003B41C62F2731EEA7DBF1BC6521DA01DCBF
-:10AE70007F43FD8F7C7ED8CAFD36A420949337B1E2
-:10AE800020C9A39B0CFAFF66C74356D4FF83D60B99
-:10AE90001617DE1B685C2FDA514C134F32EA7FA580
-:10AEA0005B892417E372BBA55C0E9E2563C7AF0CBC
-:10AEB000455EFCDEE1B7E579681C662FD3C57B6390
-:10AEC000DA73721E122E727C1B6B56B3909EC718DB
-:10AED000ED2FBDBF2CFD6BEA54138F96FEB1F44FDE
-:10AEE0008C7056871790DD35D129FDE29EEBF1BDC0
-:10AEF000F4878D7EE8F9F6A5E68594DE9F1744ED8C
-:10AF0000C92BC4739E8817C1B27EFB6FD0F872C57F
-:10AF10003B0CC79BBBFB220FD2CB46A59919E6770A
-:10AF2000F055E84735F5A7F3F84B50B75FF5B6D2C3
-:10AF30004BF35EC0FCF7E0B351C4D31ABBDEA67D71
-:10AF4000D4C62E1E2F60BBF47831DAFBAB5887B520
-:10AF500040196CEF37B01EEACF68DF0FA293F3E819
-:10AF6000F18E3C79DF16CF1760422ED50978C5F3F4
-:10AF70000BCC08E0A9D1FB3B811FE6E54D8AE6D169
-:10AF800066B8C08F51310FC36B8D9527C5F0721510
-:10AF9000B049973B6A484E2C6F1B1497B0123FB5CF
-:10AFA0009F7B7DD20EB81F7C377C96E67979DC20BA
-:10AFB00071CE3B7EFC5CDA93AF3DFFD164E5E70EDA
-:10AFC00059B3FE7CFEDA3C933C3FA50E65FD83E160
-:10AFD000FAFDF2F265FE01C0EF2E2DFCE43E825C2C
-:10AFE000CFEF27F53C89F1433579A61DFD5AAF2BEC
-:10AFF000D882F5871DEC3DACA03C7378293FE4E492
-:10B00000AEA31FA3FF2ED7C758EF16BCDFB66E97AF
-:10B010004AFE60DDAE37C82E8AEFEFB50FDCA32005
-:10B02000F6377E126B5E32AFB9522D4AEDD5D8E9B4
-:10B030004B851F307978E0216C57FA615E0ACED7D4
-:10B0400032A283EEC5EABF83DBC16E95CD44F881A1
-:10B05000DEE37ADF61A67D077752484D413B6E29DA
-:10B06000E3F7D0F99A7D482AEAB0228AD366DCA1B8
-:10B0700006D0FEFE74CDF2343CAF9C91BC22AD10E4
-:10B080009ED36DFC5E9A0CC514E0E74E97A5E13D9A
-:10B090002037D8F8BE7CC15F27450A81DF5EB7F252
-:10B0A000FB46DD4941BABFA03F4DA5F91C5B074BEC
-:10B0B0001B85FB1EDF4CC47B0772CE3826E07CB2BA
-:10B0C000C5BD163FCAE3F7DC1C7FF6BB89E8AFAA13
-:10B0D000671D74BE5DD29FBB30B6BFB242C0A3D164
-:10B0E000C3F3DE4F0AFBF190D86F9579F06BC43E45
-:10B0F000E0A1D103F78379302FA431C19FBA10E3C7
-:10B10000110754CA6BFFC6E94F4D23BB99E7B3AF94
-:10B1100011F6C34991F7B966F68C4CF42FE2E54B72
-:10B120001FC8E376EF0F755FA5CC3F8D0B873433D7
-:10B13000335F42F72E05CE55EFD53FAB31E1795A5B
-:10B140007C8F9737DF97A7E8F2E21B312F1E5EADA9
-:10B1500079A53C939D235FBA11EF23D7E4D7A09F35
-:10B1600086EB6BC4FBC8E99ED213744F07F683F7D6
-:10B17000869DEFDEC815621E8D984F9EAE7DCFF97D
-:10B1800039DABF9BBE3F2DE0F6F43BA6AA6D31E64F
-:10B1900099378CCBA7711E7300F7252F8EF07B3F5C
-:10B1A000E3D593E7B8E3CDAB6B46EF8D386FCCCFEB
-:10B1B0008C355ECA304E2772BE5DAEDE9501BE9FF5
-:10B1C00037BA3A595376F6E7CFD5C8D7D9023F5D9B
-:10B1D00057F5E6D37D00B3B9FF1A0FCF65E66605D4
-:10B1E000E190E00A06D11E91F715E37DC63CCF231E
-:10B1F000744E7C47E1ACEACE1F0C86B395BECBFE05
-:10B20000A4DC39FA884A72E7E807821F99DFA19423
-:10B21000A1BEE27C7594F1B8EED176FEFB1FCB8225
-:10B22000A02B407E2CDD5E3F070F1FAFDC3171236A
-:10B230008A7F7C7F37C89FA5598C4D83E7B20DFA72
-:10B24000FDB16FD903A4E7563C60D467012BCAD97E
-:10B25000950FE9EBD7B107BE46FBA0CE60F76608B5
-:10B26000BD6BB47F670C13F66F192BBB90734E8FB9
-:10B2700030FFEC61A4FFF97EDB24B19F6EACFFBC14
-:10B2800097D3C36D3BFE60C59F048AD7EF319017FB
-:10B2900023A1DF13EB9CF45C32CC5F330CDA350D69
-:10B2A0000B2EC471FA0E70389F6A38B592E2D2B58F
-:10B2B000DC0EB0E1252BF09FB6EBEDE447DF8BF71A
-:10B2C0008C019C6D366E5F48BB4A556F57F1275B0A
-:10B2D000A6FE6E451AAECFFDCCAC2AF43F3CCF247F
-:10B2E000F9111F9BCAFD2528BF37553B689F78ABD6
-:10B2F00089DF4368B7F1FDB9F0D353F7613878645B
-:10B30000C7E619E86738BBF746302ED166E2FBAFD7
-:10B310006DD398B8C79A8FD7D45DDD89F3CAAF01D2
-:10B32000790FFD6D2AF0973835FD33612F350A5CB2
-:10B33000F4BD76D14FF1DEAB9FBF43E62AAC730478
-:10B34000C5BFC6314E3732BF847E1B43132F3A012F
-:10B35000FA8769CE3F8FEB50229614BA5F8FE2D8FE
-:10B360000DEB2319D7A3FEFC25DFAF95F373BF9E2A
-:10B370003D03E3FD529F5E8FF96D18071676EF22AD
-:10B3800026FFF87E41ADA0EB45C2DEBD3E89C37904
-:10B3900019F3D1F9ABEBEC2C05E3CBD757744CA2E6
-:10B3A000FBAFEB2D6968AFC8B8773CBCC78BCF3417
-:10B3B0003E99CCEFCB51FA476327C73006521ACDDE
-:10B3C000B737F6B36398E0E7D1C24E1BC9FCB8CFDC
-:10B3D000D2B8E722CAC7B725F27D35906F76C4EBA5
-:10B3E0007ED4E7B0EE5B5E4D88F07DE3B0B81787A2
-:10B3F00085683F664F26ED2BB80BFDB4EF7ED2D2A9
-:10B400009B4FF200E49702BA73CFB04FAE31E3FD29
-:10B410002039604741F9F82F0E5F83BFCFD238A2A1
-:10B420007725DE179EFEF8595E1ED77B18CBC31E0C
-:10B430004FBC96CA137A57AA509EF278D6B5D41E3E
-:10B440001D2820ACCAC7875F8BE7FC8E89F825F3DF
-:10B45000F5D23D418DBB2F3269E38325F95C4E1F48
-:10B460004BE0F58E15B0257311DE637A476B7F379D
-:10B47000C1932FED526E97C975CA762C2B76FFEFCC
-:10B480000B3D708BB8DF677A126B4BE0FB1521B474
-:10B49000AFDEECBE88E0F2C2309780572FDDDB28AC
-:10B4A000FB319EEF97E3AE42BD8D72DDA23F4FF4BC
-:10B4B0001BA12F609C0D344E91BF04EFE5699C9B4E
-:10B4C000578278037C9905BECCDC0FDC4A78C67EB7
-:10B4D000D38A498F4CC43CB137CF40FD82E8BC8D44
-:10B4E000F471588C734B2BDF67EA4F2B243A9A9EEA
-:10B4F000C4ED3F560AF003393645C0AD245F9CE3E6
-:10B5000019C043A642FDB70AF8E5F1FA17BADED32F
-:10B510003FD07A3578F263DEF19BBBC6129EA60C53
-:10B52000D0C1665D3FC75A0CEDA6F0BC94465721CA
-:10B53000B5BB57DCB32FEF2DC67605D06E7A45FF2D
-:10B5400044E407796F1B0B4D2367BD41488B817B1A
-:10B55000D83A787E0A1BE9E7F711CD9D532AD6E742
-:10B5600014EB736AEFA51BE0C38FFAF36B34F75249
-:10B57000CBF703701FE8AF6882E84FC7CFB1FA433B
-:10B58000BE88878F71F97F617CC8791AE0390067BE
-:10B59000C3FC243C918FA95D919E9FE43C87E59B71
-:10B5A00084BF6DE0E782EF399EC8EF5FFD37221F51
-:10B5B000D2ABA7E7D55D0526DC3F95EDDA3A5A0216
-:10B5C00028E765BCDBD6551D42FDD7D45D4E799B7F
-:10B5D000AB7FF5ECCB2168BFEAF987533099F6A829
-:10B5E000B93D03EDDC861DF7A4F871BFC41C4A41C8
-:10B5F000F97934AC56C53A0F181278907654A3D026
-:10B6000037C79EBEFF1A84C77FECB038518F363DD6
-:10B61000658BD8280E720BD95150FE9C97EFFD1AFE
-:10B62000FDD2A65D7A3B69D53F3C9CE1257A0AE5CF
-:10B630009AF08C0B8BE43278366EB7F8226E1E4F80
-:10B6400084615813EBDF88F333B6C7799C06BC37A7
-:10B6500075A84BF13CAFF13B4812B2C39ABAEE2742
-:10B66000BBAB491B67003CD4C5B1BB6ECDD7E75B14
-:10B670004BB8B0B087EC9AD65FFEACF87307DEA784
-:10B68000F94F294A91565FAE27389DEA58FEF7BB1D
-:10B69000BDF1F5EA49B40B6CDA761CAFDE5D0AED5C
-:10B6A00049B06EFE6CB04452D0CF6FD86AF181E6DB
-:10B6B000650DCF3EF124EE87B04F6C74FF41FDB3B2
-:10B6C000FB3FBE14CAF59D16F71C3E7D879211C53F
-:10B6D0004F9397DB27121FAB5EDC4FF70CE27BB476
-:10B6E0006B255EEA3BF75AD9F8C1F0ABE8D82B7E60
-:10B6F00077C1809F8ECFAFA4FB3C7FF99D15E9FAFF
-:10B70000E81E8565160C6E5FB7757F0AD21FC209E9
-:10B71000FD4B89A701BC0DC257E49ADDA5548FE209
-:10B720001AF1F036379FF178D0AF9E7D0E7F07B0CB
-:10B73000EE37361FAEBFEEB9DB53701D5F999B39F4
-:10B740007DFFE29E0C3F8C5B67096538E9C9DFD756
-:10B750003D7E07D1DDCD07EEC8E0BFA7E1CF364D76
-:10B76000A17566E3FA6E7A6C3EAD6F250B12DDD5DE
-:10B77000FD82C727BE15BFC760C4E769C11F5F6DE3
-:10B78000B3E18F64B0AF30111DF3083F50459EEF19
-:10B79000AD4C7B8F0558DC54FE56C407DE1FD0032A
-:10B7A000CCCE3471D9A6EDF7F6207E8E0DF367E28C
-:10B7B000BE1AC02124E0A5E0FDBAEA81CA4C8E1F62
-:10B7C000E635CBB832D8DF15F81EEBF758FC09C5C3
-:10B7D000BA7662BF9E8F2FE31330EF44DCF7FB2A6B
-:10B7E00023F6B9ADD1C31521DF580FD3D2573C7E14
-:10B7F000DF7E1FD1D5371F71BE690C5757D1F71E99
-:10B800004B048F163786F7D628240F6CBAFB9F0699
-:10B81000E862BB45F0B3FE3BCCD3AC68E1BB87E745
-:10B82000D5AE7CC8A6BB0F214A37D6E8FB82287F5D
-:10B830004A3FEA66C1FFC6F51AE5C11F0CF2803D1A
-:10B84000E619D2BD320D96F0938F22FF02BFA29F60
-:10B85000D9F0AC85FCFCE33BDFF8F83AA0F3E31D3C
-:10B86000926FF572D5C8B7752F4C62B1F8F6B8C3B0
-:10B87000C762F22DBC8FC9B78EE83E8D97FD7072FE
-:10B88000F5E63872356FB8F11C4B512AE6BA1F7BCA
-:10B89000BA7E38C5050C7095FEAC515EBE9CEF8D2E
-:10B8A000292F195E41A581A3849FA4C755CFACA6BB
-:10B8B0007106E856D2A5A4DB01BA1C945FA983A344
-:10B8C000F1FB17288F2645F16E590F7E0ADAB1AFCA
-:10B8D000A9F43B287D30978D00F7BE9D05B40F7A03
-:10B8E0008FB0F3FB9CFD2918D7BB47F815FD184F07
-:10B8F0004C8DBEEF4F10790381FE94348D5DF47949
-:10B90000B79A82765C6F38F6EFC9CA7B2A7BE3FC74
-:10B91000DEAC3CBF54A93AF2D7629CB69DEF4FAE65
-:10B9200068599882F18CBEEE42FA3DA19BDE057FFC
-:10B9300017E6DB27E39A21BF39BB2C7ABFE9111642
-:10B94000A2FDCAE5DDF5B45F688C83AC74D4A4E2D3
-:10B950007EA0310E7233E641611EF263FAF7AB301E
-:10B960003E827832D05310E9297B303DAD1C2EF653
-:10B970005F4B58896EFF55C8B54AB5E8A7689FF474
-:10B9800081DF8EF120A616FD1AF5E9B7E8C723037B
-:10B99000843C44A7F5C12332CF8AE85AD29DD17F97
-:10B9A000373E4FBCF469199E076A78F9DF8A7F0E2B
-:10B9B000CF132F7F32FA552CFFEA5FF3FF8D0DAEC8
-:10B9C0005FB1E78FE4AFF4EDB1D17CFAF6BC9D7FB7
-:10B9D000179677DB7C38DFBEF536FE7BD07B92E9AD
-:10B9E000DEE9BE613CCED6FADA77C5BDA4A7361033
-:10B9F000DEFE6E38BF2FF654F77F7D86F7AB9EEAEA
-:10BA0000B67931EED0B42789FCF0A6DD09744F7CFD
-:10BA1000DF6BDF9569E345FFDDF5348AF3167DC9F9
-:10BA2000AC16F35BFAD2B8BFD6F4EAD4275A0AD0E0
-:10BA30002EDD4BF71657BCFEA762943F7D2F70BBDF
-:10BA400002FCF3C77113F117C3BB7F6A998AE78DB4
-:10BA500018F9D553BD7FBA36E48805170E873E80A6
-:10BA600003AE0BE042F775C78347D7707E0FFFFF29
-:10BA70003E787C4DFE4243F764E2A3285C14FEFB53
-:10BA800023DDC961BB42EBE7EFF77C578C76D2F13F
-:10BA90008E16D2FBE75BF787FF6BE9E0FBAE5B89B5
-:10BAA0000C65DDA7FED7AE9BD3FFDAE15C3F19F949
-:10BAB00060309DFFEAAFA9FC5CB28FE66BE0FFFF50
-:10BAC00007ABA359F3008000000000001F8B0800A3
-:10BAD00000000000000BCD3C0B7814D5B9FFECCC76
-:10BAE0003E926CC22604084260F2244A1E0B791072
-:10BAF0001EA99B842008E206A4A2222EF8E015923B
-:10BB000008B6C66ACD622202F5B6516CAF6DD16F30
-:10BB10004141DADA6B8A41B1025D10115AAAAB8257
-:10BB2000A246BA52AB50031B41052ABDDEFFFFCF30
-:10BB30004CB233243CFCAEDFD7E423C733E7CC3927
-:10BB4000FFFB75CE18498599ADB9004DDB4EE587F1
-:10BB5000B1056806280648526D00FD004E6CFDFADE
-:10BB600090944CAD5D853480BAED710045D8FE31BE
-:10BB70002600124064DBA9129F13E01BFAB912A041
-:10BB8000A3119718D6DD37B71D9B3F2CB917A7D443
-:10BB9000BCF041FEAFB1ED78E1BDEC97A9FFE2BB8F
-:10BBA000433EC0B6D606BE565C2F120F3337213C3B
-:10BBB0009144F000EE5FF7F2E8A796E1FE8BDB3EE2
-:10BBC0009F4DFBD76C1D0532F62BFFF4EFFC30CDFB
-:10BBD000DF2479C4F3F88003E1AADC7E463CDF7EF3
-:10BBE0002A1FB0FD6C93149413B0FF807D7E80D625
-:10BBF000ED05EF118477F17F22DE3B6CB7E278C36D
-:10BC00005095E1EBC67B870DF208DFBDB3697E641A
-:10BC10007BBCCB9E46F0FD7B0844E17F21BCBDFF91
-:10BC2000B1FC3E3FDE007E86DB2A7B1DE908DFC3D8
-:10BC3000100CA9D83E0830B1D5792E3C3FA6C16280
-:10BC40007A0F42D01F4006F123272F9C0209D4AE61
-:10BC5000FA5CCEA7F7A74D4C4338FCAAC5BD5EA53C
-:10BC60001916A6C38AC1EEC02A840B14EFFCB5D8FE
-:10BC7000B70EAD71AFE215EE042801F881435BAF5A
-:10BC8000FF948912AED7B40CE1C2759AFA595C4D93
-:10BC9000B88EA25A82F67C6E3FA2F6A1FE57EFA1A3
-:10BCA0007D15A70D82DABBDFE03F27603F47EBE35E
-:10BCB0007EB199517DFC17033B5D0AEE1FE35620D0
-:10BCC0008028D921EA7D9C7F93EA62BAC442C0EF02
-:10BCD000725E3A9D7E4F83FD7AA793993E3ADDCE00
-:10BCE000A1138083DE57E8BF08FFE45521D2430546
-:10BCF000147F58E0237D23113DDD290E5CCFDAE768
-:10BD00000EF72A899FAB4A89F69E85FE2C31D01703
-:10BD1000E9E789C9EFA673D47A8CBF99CE974A5FB9
-:10BD20009D2F31308DF91C33D8E90E20FC0FAA82EB
-:10BD3000EE0F22DD25A99BBE3ADDCC7CF093EC14FE
-:10BD400077D3BFBB1DE7FA64383312BE41E2FA2B4A
-:10BD500020A71ED7A992C785FDB8FE89D238B79D06
-:10BD6000F44582A03412DBF2FE15807874A4DA1454
-:10BD70006ACB3A11A72878AF3CED00250ABF72487C
-:10BD800034F43B52B3F9FD4AC740C37B1D034B1D3E
-:10BD9000F4BCCA956698FF464C423E14D07B1326ED
-:10BDA000D2F85529971BDE9B7AB863CD1C6CAF95F2
-:10BDB000C245241C1D7B675510BD26A9230CF3B674
-:10BDC000A059217DEEAC9203EB901ED552B07F3E80
-:10BDD000D26D72CE68237C128C273C6B2C285A388B
-:10BDE000EF1A77B961FCDAD2498675AB3DD5867E0C
-:10BDF0004DC357A0F40518DB70169442B4E3C15646
-:10BE0000C3FB857BB618E627EC03391EDB11FBD597
-:10BE1000266A0BDB434924BEB6BE0EBFA50F8A704F
-:10BE2000D85B89E840C991FA57A86D70203DF0F9B8
-:10BE3000A918D122BF58CEFD8762024D08EF294BC9
-:10BE4000C04774B85B0EE4501B3BE88E7C48073853
-:10BE50009AF2B0DC87E0075FA78A7230FA8B401352
-:10BE6000F5AF3CDB2AFBC80E6F94FDB602E2FB94F3
-:10BE7000B8BF92DD6D9580F85EE3B47802E4B792C6
-:10BE80005AF39746C9D7673F845BBCB9E7EAEB8BA7
-:10BE900059E596345CBF39C5D3B283EC66C587B328
-:10BEA000E5F473E7814BE90CEB7449A7F7BC4583D4
-:10BEB000511EE5F8F10EB2EBB19532E30557590387
-:10BEC000EB719DE516778CA6FCEC5F5D13AC6B49BE
-:10BED000AFD7A409FB10FB175025843FB6AF4FCE58
-:10BEE000A3F77E26C17AE8DEEFD652603CB2D22CB0
-:10BEF000420F1457BF9BF3E8FD787EBFA454D011C6
-:10BF0000A6580259B864C241F76E2BF657E7EC7792
-:10BF10009119689B72D82F235DDA0E86CA24D4A5A6
-:10BF2000010F979FCC14F3210BFB6D39E3E3F2D89B
-:10BF30008FE558C8CE2C41B347766647D93339E4EC
-:10BF400027965C7EC500E8C1BEE96DC26909D4C20E
-:10BF5000EEFE9A3495E14A50C2407A9D705AE171E2
-:10BF600068C8B690FDD1D74F98A5BEBB94E0D86302
-:10BF7000852CDA5EF12C223C565DD1AEAE623C04DB
-:10BF8000DE00E1142FA2FA4FF4932A315609A7DC00
-:10BF90001C7F2E1CFFDC589CA8221E7DCBDD896EE9
-:10BFA0006A7F8F441FC374F7131D7E4A7F2EA3DE62
-:10BFB000DAD0781CDF4836518C0701E57A954D1BA5
-:10BFC000279382FDBE9236EE5FEB1D4F7C958DF37D
-:10BFD0000BD2BBE67B1C29DDEB7BD7AE0D35F748DA
-:10BFE0004F3BFBE55513AC01BB7431748DBB005D59
-:10BFF00013045DCFA2F5C77DEE72887D3E96D421F5
-:10C00000246FAB2D68053200F6BB7CD7935CC7CAA2
-:10C01000C13C7A3E37C133A00CE5AFCDE619720FB3
-:10C02000D9956D31EE75F85EF59D9F3DDE407A3D08
-:10C03000F59F39CD24378A276E24EE53E7FA8AED2F
-:10C0400041959CDB87E29D2E3A923CE39E3FB5747E
-:10C05000F7C93E2474D3D59389E3ABA2E8EC709082
-:10C06000FD12FD47D3DABC4CA7DB1C4CA7A59A4EAA
-:10C070003527428B05F5E1A46BC3F7491E4E6EB41C
-:10C0800002C54D6D3448FE32C7C17A05C9E1946AD4
-:10C09000D483BC372D5E8ACBDA513E3C241FF5D9C0
-:10C0A00086F54E8E7B37290FDF3B99AC24117D1628
-:10C0B000866D4CB79B1508DAD15EB625DF5659CE92
-:10C0C000FAA1F278ABB6CE6B599EFBD2D8EF8C7743
-:10C0D0007D8278499E31F237C37BE71779D04F7460
-:10C0E000FB8874AE2334937A9783E6724780E2CC60
-:10C0F000BAD265B9E41F9624660F00C4A36EBCC40F
-:10C10000FEB6AEE10BA6BBBEBE725A06B56F777F18
-:10C110007C86CAF640513C2C0FCA691B8FD7349CD1
-:10C12000643B8EE0A491DE742C13F6AEC50AB754BE
-:10C13000635BF3BFF22DD538BF06430CF617B0D3BF
-:10C14000B624CA1E42EBE75D76BF0079B77ACA5BB8
-:10C15000B16467AB25D70C401C8EA6BBAA95D1D87D
-:10C160008F71CD90B0DFB6EE8C97FBA9AE1916ECAF
-:10C17000EF4ABB498C0F74FDDCE206F87CDD5DA262
-:10C180009FE63A40FD0FD31EA95606623F5EC8C126
-:10C190006FD26AABFDB9245F4EA6CB891571AC1F77
-:10C1A000BDD1795EC3CB06BA9C332E4BB778C96E2E
-:10C1B000CC1476F1D8CA416B391ECA0C65D39E5B8C
-:10C1C000D344FCDA1F79538AFF5E45BD77201D9268
-:10C1D00033C063C1F9C92FA23FA2F91F878610FDA2
-:10C1E000E6BD181394901F8B9F78C546FE68AEACD1
-:10C1F00066935EBD3FCCB793E4E3787C88FBF31A8B
-:10C20000B6335C29592E61A75D9DB95E94CFF9D0F4
-:10C2100062A3F1F9A01C26BF614161A6B866A173B3
-:10C22000978DE2B2854F5B0F87A3FCEA22081F229D
-:10C230003DAD79D67A381CE57F81DE8F92AFC3168B
-:10C240000187A2D163AE1C9A6D13701D20B816270A
-:10C25000617C2F93BB08F5F7715C5493C379494A0D
-:10C260002C90DC2DBFECFD7C5F0F7EB0B511FD3E48
-:10C27000AADCA6C62DDCAEC135C9EE0C50C23637DD
-:10C28000AE53ABD9E592D0611B44BD7F42A36B9FF7
-:10C290002D128FEBF6A27B3C5ED025D733C2827085
-:10C2A0002C9EB66F1CF145E7E79571D01A93C47CBC
-:10C2B000716B7C71135F74FA233D0B157C6FD7593A
-:10C2C0007C2FAD27B9D0E92FE06D8B15F6A27373E3
-:10C2D0000CC74D66F8E3D205BC3A1E43D3CF0FFF1F
-:10C2E000D0F4EF06FEA1E9428FCD78E87AAC3FD7D3
-:10C2F000F5D88CB70EF7A5CB59C8763172A6DB9965
-:10C300005AF0E5D0FABA5DD1E9ACC3A9D3AB8DF24E
-:10C31000A11EE0541A5E32E0A3842A28898071E9C4
-:10C32000E9C28EB54E02E283D2B095E75D2A3EBAED
-:10C33000BDED0D2FDDCE9AF1D3EDAD8EA76E7775E5
-:10C340007CCBD090B03DC4349EF2AC2B4FFB0C7133
-:10C3500070392C30C4C9958E3B0DFD2AD73D86F926
-:10C3600057A52C338C4F52571AC627E73C62E85F1B
-:10C37000E3FEA5298E5F6B8AE37F63181F170E719A
-:10C38000DCFD7AE344509047DF3BD2C9F177B0D16E
-:10C39000C5FD9D8D29DCEE6A5459BF7737E670BB29
-:10C3A000A7D1CDCFFFDC58CAEDBE460FB7A1462FAF
-:10C3B000B766BB30F5F9EB15CA574A432D9564CAE9
-:10C3C0007764F87E928EF47BC312688A473A8D6A4E
-:10C3D00017F139CC37FBE35387EE25BFEEB2B9C96D
-:10C3E0001F36EF182DA93DC47309E8EF3C51F292B6
-:10C3F00030250C1E8A7BD03DF7245F2DE916964729
-:10C4000032FB807A37D301D664D4B79933257713BA
-:10C41000F0733F24711BF4E1F85405FCE4FFAB9D7D
-:10C420004AD09EC0A0791D08E70C0126D8699CFC63
-:10C4300077725F85E2D6EBE821C22B7B64F81E3E63
-:10C440009F51FA97339437DFE86CB5929CDCB0E7E4
-:10C450008163F7E23834FB8B493FBAE206FFFB9673
-:10C460004B891B5A28AE443A462477C843F14EA262
-:10C47000E28ECE07F4F6B674910F4C6DF2CB0948FC
-:10C48000CFCE3781E3385D1F11BF1504BFAE17D57E
-:10C490002E25382C81FCFD239534BF66BFCA74D18C
-:10C4A000F542D7033D0FD4F5A04A7EB689E69F3802
-:10C4B000089C4F8FEAF01D799EF034C59DA59D2DF7
-:10C4C0009594975D286F1C73BAF5159AB7BDD1C7BF
-:10C4D00072B4B57126B7C1C6F99A7CD6737F57631B
-:10C4E00003F77737FAB9DDD3B84293CF161EDFD7FB
-:10C4F000F838F75F6F0C6872BA919F8FCF10FEF714
-:10C500008B50E50092BF17D3451D071CE59C478063
-:10C5100022DA8B95939A9497453C65920FB35CE829
-:10C52000F200683724A4D78DE867C93FDC04FEBC5D
-:10C5300039D8CE9CD7621D2B7D7BB958E86CE6F8C4
-:10C54000C36C0F174090EDDDB9F65DC4FF17B2EF75
-:10C5500032E6ABE4AF74FBB718C2BC9E5DBED34DF0
-:10C56000F594EFCEAFB834BF0273687E57DE1DDBA3
-:10C570003E5BB65C38EF2E1A2CF8AAE7DD183F02B6
-:10C58000F9E54840E6B87A7E5A4B02E7DDA59D09F9
-:10C5900014072CD826333F30CF540622DFE6697CBF
-:10C5A000EB80E03BC49779E3E6715D6EFE1A233EB3
-:10C5B0000B9DD7F509AA3DC6693DE2590B0F7F4E89
-:10C5C000F5B95A8D5EFC1CE16968BF61D2AEA879ED
-:10C5D0003119F1C99FC49142C128A207C2EF0E923E
-:10C5E0009EED9759CF7A938BE3989F909C9F6A9C7E
-:10C5F000396917CAFDF1B38D9C7F25653CF2887FB0
-:10C60000DC77C7AFB559DEA1199C0F856DA43F3A01
-:10C61000FF96938D44B8975738029468478A5D0A0D
-:10C62000ED1F913C723CF1E323702F43FA956F7D2F
-:10C63000ED20E947B9C3C9E708884447343F47EFCD
-:10C64000F7353971DEA87D1E99C2F7E25DE1269AC1
-:10C65000A6FB1BDDFF8CEDE8947D5C17C8643D02F2
-:10C66000CC25BEC9B8783D32E79B4D946FA2413AC4
-:10C67000E99CC0F09E0C829B9E77D7B544BD69ECC7
-:10C68000598F9C80F02DD7F2C3D11F7B198E6A87FA
-:10C69000CA7268D7F2497B8A053C517474D97C1BF5
-:10C6A000A9FE097F8CE13AAF19BEC919C28EAB4908
-:10C6B000DEC94C5FA79A4D794395DCB1E1D7240FD1
-:10C6C0006D716E3BBE67B6B7BA7DEB2D6EAF739DD5
-:10C6D000EC318ED4DB3A8B38371859A91652FE4705
-:10C6E000F125E5857A9E689EEFCBAA989DD18FEBC8
-:10C6F000AB210FC1E5B29C574EEB1A3E3F6F9EA691
-:10C70000EF5FB7ADD83537AA0EB226433F5F505C16
-:10C710009F38BAF976B1FC2DEB9C69F03FFFE9F147
-:10C72000DA540C7324D4A13C2920E20810F1C42C63
-:10C7300008713B1B3AB9F5A124513B17DCDCDE063E
-:10C740005E6EBFCEF4AD26B989583BFB931E1F7BAE
-:10C75000E1EB5C928B63DF1BEB4A53BBFDABEE6FEF
-:10C760002FD5AFC6D2F9520FF2B041935BDD6EF711
-:10C77000CA1F93DD8E8C40FB807046368B73B148A8
-:10C780007C6C80CE0174FB007E63BCA8DB8BC2593D
-:10C79000EE37B85EB84FE6BAA5D97E5429228F0786
-:10C7A000C59D43F5517DFF260BCC2739DB88ED1F56
-:10C7B000108F3EB3C28A1A85CF760D8FF21BC60347
-:10C7C000E52F535D223F9CEA80E4D364DBCE9ECC10
-:10C7D0009D8186602AC5A328CFA3923C7F227AFB45
-:10C7E0001F1A97C8E70F647F8622FF3E12E736B014
-:10C7F000400A64213DB6B4897EDEED898CDF4D10A0
-:10C80000643EDE0C612BE17F0B00DBDD39A0727B27
-:10C810002B78989FB8725C3EDAA1DBDB9491AB1069
-:10C82000CF82A4CE74D2CFBCD1EF254908573EC5E4
-:10C83000BF4EAECDACA03845C7C39229F0B82CD3BB
-:10C84000F336C15790145AB59AE2C2CD16A0B8F08B
-:10C85000D3D1F7DC01517EB524ABE220CD7B4E1263
-:10C86000E785FE6D76515783CEFEDEA878FCEBCCD3
-:10C87000CA43A4F7FF20D838FF5DC5E748D52E414D
-:10C880007B18DF8F6980EF0DF1E6F5A49F7EB68FF0
-:10C8900005444B5127F44329EFCBFDAF9EFAA2BAD2
-:10C8A00059E0E3A778AC24CB17A1FD0A6C680A090C
-:10C8B000FE27EC81751C37D50FA1FAC5BC27ED16F4
-:10C8C000F2E3EFA11DA673D30F1A1DDC7E88F90DCC
-:10C8D000B57FC3FC86DA8F30BFA1F6EF98DF507BBF
-:10C8E000FBE9112844003FCCF4FC6FC679F0E8DD89
-:10C8F000CE083C2212CCECE9BCEF5486C83FF2DBF8
-:10C900003E7E208EE4608BEC2639CDDBAC701DE2E0
-:10C91000F8D65101392D9AAEBEB84C84237FCBDBBB
-:10C920008F8E2DA2F7149784F38F6F39D99FF3263A
-:10C93000137C5DF4D86613F4D0E07D2E31B48ADE2A
-:10C940007F6E733A41887604841C123F7BA8A30152
-:10C950002C633EBE9E21E2A76BED9D45D1E79B4037
-:10C960002103D52B353F53259F4D08E76A75DBD151
-:10C9700024D7996FD07EFE3D420F91AF86BA44A571
-:10C9800026877A9BB7CDE6257D7A6EDB3BD32623BF
-:10C990001DA68E99542CABDDF30B33FBF1BE79A3AE
-:10C9A000CFFC6A7532CFE7738B1B606D950BE7DDAB
-:10C9B000E4D8F12A91E066D7475589D8BF2545DAF2
-:10C9C0004DED1C356D4212D90108F03EB7E694EFEB
-:10C9D00026119BE2AEB6915F2E27A58AB2BB958E3B
-:10C9E000383A49EDEA57B9FA1AFA57A50C32CC9FF2
-:10C9F000A46618C627E70C378CEBFB4E71171AE6B6
-:10CA000091BE52DC8C7830DF61BDCCE732799BBFC0
-:10CA1000787F11E37F4311E11F41FAD930B03852DA
-:10CA2000BAF217ABC96C6CDE99C0E7B4A6F8B4666D
-:10CA3000DB53BB3D6AEFF1E997B0B5C7B8AEB69727
-:10CA4000B8EE62E353B41F8F92FD2878E13A3E7747
-:10CA50007F6EF499CB54C4CB9789712BD93D53DCAD
-:10CA60001AD1E256B3FC74C9A9A40AB9D92B03C5DB
-:10CA7000417AFC6A961F800734FF2FDA4BD5F3A961
-:10CA80006F097FF50FD2F7BED172ADB5A67A44819A
-:10CA90000DFD0AD509FF2AC33A7A7016E1D0E99F45
-:10CAA000D12DF770DBDA570716F1737F3C6E59AB67
-:10CAB000D5277E95A99DF3D7EC78756072F738DCA1
-:10CAC000F591613EDC27ED36F49BD38CFD87CB7767
-:10CAD00047BFDF9B1D9AB7E64E9B8FEAD28F893AFC
-:10CAE000A5795C87A76A678C87ECA5B2D5CEF9508B
-:10CAF000ADCBC3F513A597FA896E176E90A1BE272B
-:10CB0000FBB65E5B77CACE1890BFC5BAEFA1AC107A
-:10CB10003CFE17859F79AF8F07BC51FBB4668AB87E
-:10CB2000EF5862CB8FBFC279C75E023791FE58A221
-:10CB3000B0B7F96D9F5A2CE4276285BCE4BBC2965E
-:10CB400024BAEF323FCE4FE7C9750BE2FD746E5445
-:10CB500090DEF98E0359BFE569DFA30E94BBF72D74
-:10CB60001683DF8990ADC3FE8E4CDF34F23B9377A2
-:10CB7000C6042DDF029F1D9920FC5A85D0F7D924C9
-:10CB800037FAB9189A9ABA07C1704E46F853FFCCD3
-:10CB9000D3B7BEF518C5BD7B85FEE3B0D39C8FDE51
-:10CBA00014958FC21AA1BF0EFCA53867E1AE161B03
-:10CBB000E549DF95DEB7673ABBF57BD8B9FAACEB50
-:10CBC0007BDD01A1EF27B67EF916D9F513E8EFA2B8
-:10CBD000F5BDCB2F6A7A5EF7B8CCFAA83F3FBE55B9
-:10CBE0009E18E881BEAF697200AE6CC3B9D992B22B
-:10CBF00053D3C8AF2DD9A6F079606FFEBA6E85F118
-:10CC00009CECB9EDF6F9E21C59E011D1FDE9B62F23
-:10CC100093CA7345BB8CCF6B5B34BB23E218F4A380
-:10CC2000D664F2A3D512D7DF0E6C1BC0F7330E48C3
-:10CC3000105447F212D739906FD3C572F4DC49F122
-:10CC400018A4E428B4CF348D9FD3B5BAD08C6D33FB
-:10CC5000B2885FEFB4CD3DE021F4B232587EAE072A
-:10CC60003FC7830712BDA9744F616A9390EF038990
-:10CC70009D1D54473A501627D17914AEDF1C1DEF85
-:10CC80001DB07A53EB192FFD7CF20AF99BB84BC803
-:10CC900083357B88FCF44B229F63F957063ECC72A8
-:10CCA000B50002BB3DB86FAD3BC871E9221079BD3C
-:10CCB000399EAF1DF7998DFC8239FF2CDFB2E3203E
-:10CCC0009D7B9C538730C9EB85EA0EE6BCB7B7FA6B
-:10CCD000C1A8246F615654DDCF1C9F77C5A17A1C73
-:10CCE000B53E8ECF855E29FBEFE38BB07FD7FA3858
-:10CCF00017E5D9479FB4FBC92E1F5D670F48387EE3
-:10CD000034A9B39DF28EA39BF2DCB802CCB3A8BFCA
-:10CD10007B96FCFA6FAD2C1700C67B0D4BCAEEE676
-:10CD2000FB7F4BD6C74B740F0752C4B89EF3C9CFD5
-:10CD3000C4735CB0E0F9817CCEA9FB17D20F3A979F
-:10CD40003EF2448C8782FCA37BA6F7A17A5F87E53D
-:10CD50000F7C9E0FF27D87E8BC7ED186F891143F50
-:10CD6000402E30DFE6AFBB9CCF377FAEF86610FEBB
-:10CD700095CF5C3380EE952D78BB1F103E91ADCFE3
-:10CD8000F3F95F779CDE737C77626B461FC8EDA674
-:10CD9000935E075CF1F4322FF1BD5852C5390DD4C2
-:10CDA0007B06915C6CA9065A77A42CEE8D76AE8C2E
-:10CDB000E3B8D42C773559220EACD1EB0D7DC1915F
-:10CDC00042FAE303A64364E5F075741ED69C95A46D
-:10CDD000F9E9CEEC6951F712ABE4F6DA97493ED7A0
-:10CDE000D8B90ED211D3F33958435622CF9FE7302A
-:10CDF0009E9BD7369C31F67331BFC3F74736A98562
-:10CE00007762BB54A3FFEA54EFBD59F8FEC2D64780
-:10CE10005ED8C77459F3C3F769DF3D4E517FD927F8
-:10CE2000E8678EFFE739449D03602DEFAF3FFFF4C5
-:10CE30008977F97CF5D3CDC3B3C5B971E8935FA702
-:10CE4000F179F1A17BB1DDB4E72DE68B19DE73CE6C
-:10CE5000FD2489F1AD213CFAD2F9AEF71182131904
-:10CE6000C179DBDC55794C3FFDFC2D72B4E7FC4405
-:10CE700087535F5F874F5F5F9FF76496C863666BFA
-:10CE8000F9C1315BE8389FA3BF305CA2FA5ED7F3EB
-:10CE9000A4507E6294BC7C57F5F41BB57AC841CB94
-:10CEA000B21FD8E89E5CEB6AAB2FDAEE5D621DBD67
-:10CEB0002B0EF480EAEA2F5C09FB2D444EE94FE784
-:10CEC0007D5A9F9401FBE334F0248287EE0D6A2D96
-:10CED0002CF4A5709D9CD693E91A6280FB4DE56EFB
-:10CEE00095DA2B25AF22EE7D0558FE2740FD60C266
-:10CEF000C3E208F3B9987ECF6546E2F26BD270BF09
-:10CF0000E67EB09CE29866ABD00BFF9C38CEDF7417
-:10CF10003AE97E065CB906FFD2EC0255C175662A75
-:10CF2000B0C29A24E60D453A1FD833F7558A13DE6E
-:10CF300055EAFBD1BEEF391FCB932C14DF05E22954
-:10CF4000477CFFADDF16FF15E77E009E3227CACF74
-:10CF500075AF39D8EE9BEB11B7838FFBF3206CFDD7
-:10CF600002DFFBDBE87FADDF09DD78FD6DCC579B91
-:10CF7000293FB829F181627A5FBF8769BEEF77D414
-:10CF8000E5E47B81E67B7FD782EF33B25BA72CBEE3
-:10CF90005A51FFA81F45FE3792680309E747FA690F
-:10CFA000F438064C8F88557BFF7395FB459523B964
-:10CFB0001E09A754B6C7634DFEA668B845E461DFF5
-:10CFC00088F9659D8AC1DF141568759BAF558E4B36
-:10CFD000AF3CAD9CD71F3D942DEC59515F4B7D4F1D
-:10CFE000F1A19A2DF4A70982B2C047C40963BBE43A
-:10CFF000CA2313FF6AB57E2DF93394A74882C34F25
-:10D00000171DC76E15F2355609EEA016AD2B34501C
-:10D010005CB105FD9D0E079D11A60C673918A3CBC9
-:10D0200027AE350BE72D97EA396F71503C83ED2A17
-:10D0300029C4707C0F3AB9F5687EBC02DCDC8E072F
-:10D040002FB7289FDC4E84166EAF86566EA74048D9
-:10D05000F8FD2B824DECCFE03E179F5B4C9A67A109
-:10D0600078A3E8FA9EF3850A8D4EBDD30115AEE490
-:10D07000D2E9300150EF327AA0C7E01CB61F667AC1
-:10D0800098F5B30CC232EB2719860CAA13A8ACA7EB
-:10D0900095E0E17ED545D2A134EC53B84E63A64766
-:10D0A00065CF723159A3C7BFB281E543E7D3FDD93C
-:10D0B0002A3FD7F9857A9542F26FE6A3FEBC28AEE7
-:10D0C000E2245D4DBF237BF874BA57555458B19490
-:10D0D0004CF2DD1BC64CA77B5545632B9EA723CF87
-:10D0E0007BB2C7897E4145A1D58D598B54367D3C95
-:10D0F000CEF769F79261A688AFEFD2E216DFB21FD2
-:10D10000B85DA827BE54A79BF07360704FF759E431
-:10D110000C713E38646270A715E71D527C73B2290A
-:10D120003E70041354A4FB5DCBAAF8DEDA4336311B
-:10D13000DF6E1775581D2F7CEE8FC1FEA64DC3976D
-:10D140004AE9BDEF8FEBD6D2BABE65597ED257DF22
-:10D1500066C92D3859316026EA6747C80A540FD589
-:10D16000F7C94EF52DCDE673DD6CAE930DD2E29985
-:10D170008E4DC387135FEECFD6EE6125A71512DD66
-:10D1800096A57AEFA7F99178215FF76B7CE8ADDD82
-:10D1900090EDB92FBBF8DCE7917F2000F8FECFB20D
-:10D1A0007D0FD07A757167D9BF1F1FF1F6F2705AE3
-:10D1B000B79C4AC8A459887793070236F603DA7DEC
-:10D1C00075EDBC2A723BAE837428F2FA9AC8A48D1E
-:10D1D0009AD55942F613D7FD2F5ED7161E3202DFBD
-:10D1E0007B6CFA219B90B3C142CE343BB46DFBDE25
-:10D1F0007B0789AE17A2F4AA6EFB99AF3E40FAD521
-:10D200009D70BA697AB73EFD7229E793E034D80D74
-:10D210005DCFC66CB1735C3D76EBE5B7D3BCB2B7FE
-:10D22000DB3308AF2BDBC37C0E16D9F6EE2001876B
-:10D230009E6F9C92BE8DDFA5735ACEE3368B73DA58
-:10D240002552FD2BF1D4FFBDE4F623FC9F6A7E43FB
-:10D25000CF8BE76B782DDEBB7E39D545E6AFB97550
-:10D260000ADFE30988BC41C55FD2FF2F611F9F8F92
-:10D270002FDA68CE273A6DC4FFC5ADA6FB40940FE8
-:10D28000D3BD8768FBDE433EBC3D5B3BA74D855469
-:10D29000C6439ED5C7D783BD33E7BB8F83E755967B
-:10D2A0004FF0CAB47FB1D2733DE1B9EEEF69581FB8
-:10D2B000E6697B139D9C9CEFDAC47DE12796BA5DFD
-:10D2C000D4D7F4732DCA4A29C5D19DBF64F9D7DFDD
-:10D2D000D3F575C10A712F1BD6F465992BD860F769
-:10D2E000105F0B360CE0FC02F3208EFBD66EB0AF65
-:10D2F000A07ED383B17EB980EAC99D97515DA529EF
-:10D30000467CE744EE91EE8916A48B3AC719DDAE50
-:10D310006B7E5DBF6FDB95FFC467F3BDE6AEF1B01A
-:10D3200062C8379AB4F8B988E0A338B0DE2AF2A709
-:10D330001801FF8E37BF1F4771EC66C51B4775E9A3
-:10D3400013FBD3FB400F74D3DB62742F709E73C644
-:10D35000E277A7649C8F5F458F6BF7D335F9FC6349
-:10D36000A307FE6EEDE6878E5795FC6CA58DEA1C33
-:10D37000B7818BEA1E4BF63ED544DFDB2C59095CA6
-:10D380005138417F285F3862E173F0317B0B53489D
-:10D390001EDB347B47E7C26A945C95505108E7175F
-:10D3A0000F86007D7F14A3C6821A9517C7E524193E
-:10D3B000FAF1EECB0CEFF7294D378C83DF13CA2D32
-:10D3C000E98E5F133D5718E63F943081BFC7290BA4
-:10D3D000DDC175A5BE13471AC6ED28D774CF01BEAF
-:10D3E00010F14F29FEB25F857A99E01C1B06F815F3
-:10D3F000CADD980E637C541A6EE13C3066BF62C889
-:10D40000EBED17A8335D3E4CD3ABC13058D8073392
-:10D41000BD8DF72196EC95398E5B928A81675AEF24
-:10D42000F4D6F54FA77B3FAF91EE03661AE93CD0E7
-:10D4300067A4F3A0F9463AA7D61BE93CB4C148D784
-:10D4400034BF918E192BC618E667B55418FAC31E5F
-:10D45000BFDA30FFF2C034437FF8C61B0DF3F35A36
-:10D46000E71AC60BB62C3C2FDF47049718C6CD7CB5
-:10D470002FDCF323931C2A4CE762EDFB2C9DFF7EEF
-:10D48000FC25FE8F056F9FA044E5407F13E9E3FF75
-:10D4900017FF170CD3CE1174FE5FA45DBD4AF3C312
-:10D4A000E6EFBCA6C6097BF3FA9E13FB3DD87F438B
-:10D4B0002DB4A650DCA4C5075EFD3CC294F7E97903
-:10D4C000CAB5A592E99C3EC6704E7FA17B6DC5A1F1
-:10D4D000A0A13F62BFF83E6AE441F72BD4167FEC6F
-:10D4E00091A3BF871AFD05BBE573F24EFD7E9C9E9E
-:10D4F0003741F3939C87CED2E127252839B7BEA8C0
-:10D50000E7A7E6BC55CF57CFFDDE4AC42577CBBD94
-:10D51000E5B1227FD5F3D6EF8387BF2BBB6AB06F0F
-:10D52000ED30B4FFB2A5B32F8DEBF92C1196CE8D53
-:10D53000234458FE6EE69DE99E5CFE1E95EBDE0BD5
-:10D54000A5B7A7D33D7F04DF152E11E51FFA796932
-:10D5500098EF77B4DE61C9B5BC10DF7D7DCC674341
-:10D5600068BDFF1926E237BB8C1442FF3360960773
-:10D57000E8F9A824CF7334DF7C3FDBDC9AEF0DB5EC
-:10D580003506B9555C6EBEB763AE0F862D2AC79DB2
-:10D59000FE1F497C4FE733026E7477BC726285953B
-:10D5A000E315D0F2F19B35FAEB758B591A3E877172
-:10D5B00089F9E87F6FDEF21AF365514A8756EFA8C2
-:10D5C000E7F8FAD6C1CE917C0FCD53E816752EBD83
-:10D5D0008E31E892BE2FB910FE8B528E1AEA48F0B7
-:10D5E0006CDF8B3ADFEEC65BAC7F78A5A8471E5E8A
-:10D5F00099CAF5EFEEF58F733DE9E6FA370D7A71CA
-:10D600004BC37B063D98E3FFC8301E4EEEB452FD7F
-:10D6100030FCC2C0093721FD8E6DB6F3F7D0280764
-:10D620001DC4577DFDF0CAE1E3F9BBCA0BE2F9194D
-:10D63000C3D1DE1862FEEA781E6A3CC8FD706398AA
-:10D640005B339E7A9D426F6D3B2187EEE7774AB14F
-:10D650006EAA0B9BEB17775BD44F480F1ECA49D7B6
-:10D66000E2B5FA022FF34FD42BDAB5EF4BDBB5EF6F
-:10D670004BDBB5EF45DBB5EF43DBB5EF402356E7BA
-:10D680000AAA6BB44BE2DECF2CC9F3E41CDC2F6D8D
-:10D69000B0CF994371FFC2CE7C05F7A92B08CF9676
-:10D6A00090CF79FD7C7DE8B984E9C240FE9EC8CF69
-:10D6B000F7C38E58FCF9F4FDCDE48D59D7511E788F
-:10D6C00024D67F9C2291CA9CB4EB28EF3B62137A4C
-:10D6D000387D63EC75A4771FE362849FFF2549D4EE
-:10D6E000959C611B7D3F3535D93728A758DCFBE277
-:10D6F000EF66F039C9A55EE78C58451C18D1E2C128
-:10D70000F41C710E989123E256BD2D239EE3F3E99C
-:10D71000D4B27E3E9CCDDF9BACB103C5AFB83F7F9A
-:10D720005FA3DF33317F7F33F24F76FE4E42AF8708
-:10D7300096E4A4F13AF45D0EE965F24FE2D86E4149
-:10D74000383484BEE3E98277BFF8AEF218D591A3EE
-:10D75000EACF2539A20E03B781E13BA0C57B0F1F9D
-:10D76000A23CEBFD61BE3144D7B916B584F8BA3896
-:10D770006107D7BBA6E4A8BC2FC2CBF8A2FD6926DF
-:10D780003E2D7684B93E76A17A786FF81FBB3DF4C2
-:10D790008B5CAEFFAAF9FC1D9EB62FC23185E8AFA7
-:10D7A000E3ADC3D1BDCEF9E55FAFEBEAFD4F9F78A6
-:10D7B000285BABCBDFE2EDC19FDEAAD1A5DDDA733A
-:10D7C0001DFD7E8DBFE7F0671800D5EDEDB1E823B4
-:10D7D000B0ADD7E874EC06C487EB139E11C4DFC567
-:10D7E000D39CFCFDB9BE3EAEE3FBC379F6599DEA7E
-:10D7F0005D48F82FAC1775777D3C2209BEFA578A31
-:10D800003AE8E2EDEF1DA2FF0FC28267F20A39BFCC
-:10D81000D7DE37D319E9CBDF45CD95C5B915D2F79A
-:10D820006EE2B3B9DEFE6DE91A4915E7AB91B56753
-:10D8300086D03DB2C5746F8DBE0FD3EA57D066ACAB
-:10D840004B21BDFC54AF38F73C0AF85CCBAEF91164
-:10D85000BBFEFE60C5F0FE31A7F7A7449F1734BB9F
-:10D8600081F30316DCBF4DCF934D7594B690A87726
-:10D87000B6A5D8384EA67887FC931EEFDCF5A6A88F
-:10D8800077DE9526E268828FF82B1DDCCD714297FA
-:10D89000FF97DC2AD1CF69F505687FF02D65FF255C
-:10D8A0000F45FED2F9C59FAFD6EA01C21F166BFE27
-:10D8B000AF98D6A10027B70FFBC5226D5F8C1FB9AB
-:10D8C000EE361A7C4D0218AD6EB672B7A18EF07F9F
-:10D8D000947817F25045000000000000000000009E
-:10D8E0001F8B080000000000000BFB51CFC0F003AD
-:10D8F0000917B1A1F26FA0F1533951F9BF5951F98C
-:10D9000097D0F884B02E1303C30A46D2F420E39DC7
-:10D9100040FD0780F838109F6322DF1C103E2CCC9E
-:10D92000C0F04D8C81610E906E03D2E781F83B1000
-:10D93000DF05F2C5441818548178A12803430C90E0
-:10D940005E0EC44522107D4780749D2879766AF268
-:10D9500050E6E6514C195E2D8DCA2F5701A647554A
-:10D960000686B76A10FE622479267506860A1508AF
-:10D97000DB408E81A10BA866B63476730D81F2DD93
-:10D9800040792175081F00B5882CEC680300000061
-:10D9900000000000000000001F8B080000000000D5
-:10D9A000000BCD7D097855D5B5F03EC39D879C24ED
-:10D9B000377033C9490C1835C04D0C838878120371
-:10D9C000064DF106D1C6FEB45ED0DA481922F26ADD
-:10D9D000B4B6B94012C2A441B4A568E98D554B79DB
-:10D9E000B646C53EDAA7F482F8446B6BB4D4E1695D
-:10D9F000FF469EB5D65FF9E280536DF9D75A7B9FFB
-:10DA0000E49C939B04B5EF7D0F87C33E670F6BAF1C
-:10DA1000BDE6BDF6BE6ED9C5D804C64EE09FF3186C
-:10DA2000BB5A628CE50D3D9937D6C4228C356B6E9E
-:10DA30007D530963DF546287F56A783F5E8EDDA30C
-:10DA4000E3FB49752CCC9882F5F3198BE1FFA0DD3F
-:10DA5000FAE0BA718920BC531667E1D3ECDF7C365B
-:10DA6000AB8C6955F87DCBA44CDFCD274BB906FABA
-:10DA7000BD8CFE9C2865ACF59597261F32CBF05FD8
-:10DA8000010B455E0FC05F66B0192714C6DE0D2E70
-:10DA9000CC4AB391FB7BB3ADFB4C7522631FB6BD83
-:10DAA00038F9D0C4E1DFBFA9B096DE8AE1EF673074
-:10DAB00018741AE223E98E4F1E9AF7E03C8380A483
-:10DAC000B3A13D63694F0E3C776F3B532D1F82D34B
-:10DAD000390FC6921CBF9FB39D27529B2E8052A523
-:10DAE00094984D70A9F0CF74C6A82AACCBB2DD8D46
-:10DAF0008CE072C0DB11F9E7C03BE27A897AEF066D
-:10DB0000D7753268B7DEC5E9A53D4F8EAD63C3E971
-:10DB1000C55C0F138F27BB1E37301F8D63D251B3E7
-:10DB2000BC78D4751F8B8EAE443A3AF3BF9F8E9269
-:10DB3000FF7BE9A883FAF95F46478C75737CB17E59
-:10DB400015C71F7ACF9F91C5BD12D21914FB10EED5
-:10DB5000623E142B6EEDBC569E02628AC59E3C0D41
-:10DB6000E45671FF9206847BFC2BF3FF8ACFCE45EF
-:10DB7000B5F573617EF94DBDCF5E00CF483C2525DC
-:10DB800060BDB63319850AF4B73C5903F36BC7CEB1
-:10DB90006631766F728991C4F93283B1718CFD8BD5
-:10DBA000981363B2AE4239447FCD340F374B737C48
-:10DBB00048273CC3DB8F34FF10B633EB94E0FF57AC
-:10DBC000339CDF58EDD81A3E5E12FE417C170E8D55
-:10DBD0004FFDE4375BCA0CF163FFDE877F21FC5EFB
-:10DBE000FB3F325E01ABF2A17C0835C85A0AEBB3A9
-:10DBF000DE6C15CA91E52A4B838C28A8EE965CFA58
-:10DC0000D8EBD2C9587D2F5F1FA9313404DF9F990B
-:10DC100044F473CA8DAFF56C00923BBE381823FAFA
-:10DC2000D018CBCD193E9FDBDB90902DE545B5524A
-:10DC300082C68B3D5906ED938BB8DEDBDEB030DB60
-:10DC40002AAF3C9224F0E6A40FA6ABD391AD387D69
-:10DC5000A80DB2E19BF2C5E943FD9CF491B7C6D291
-:10DC60008E7DF6F58A9876C149D2C7171DCF5CD74D
-:10DC7000E17CB556AC6B998F01DFDE5ABF30A39DB6
-:10DC800031F2BA5611BF471A9891CAD02E7F703D13
-:10DC900093C39FB03ECAE0F25E675B2F65FCF4A6BB
-:10DCA0009E51F0A144ECF335FBF5B52AFA6BB9505F
-:10DCB000543519FB73637F40671BA3B72619F0C364
-:10DCC00071A46DC087D25D99C6322B63B17B040409
-:10DCD00032947D5123B589E82045EB62C2E7D165D6
-:10DCE0001BFED588DF56664D49C90ABFAFD54D70BA
-:10DCF000B8713CA07745830E01156A90A57D61AC93
-:10DD0000C1E1473238712A96BF6DA3832EBD8A6563
-:10DD10005A07935E11AD9C5EBF7D72F2C539DE225B
-:10DD20003BBC27DD2EA8EAAF5BF4D0C8ED54F6BAB1
-:10DD3000B93E80C4ABB0836943EBB4C1C5F6495367
-:10DD4000415F175DC612F076037E3A9BE894EC992A
-:10DD50000D45551AD215DB2DA908A7A947593487B7
-:10DD6000EA554A3AF5237B5B18D65382063DCDEF40
-:10DD700023C325E82F691C28837EBF24D6F74B4296
-:10DD8000AFB16AD76BFD26DCA467D5A132CCE3ED39
-:10DD90001BE07F4027C94A29758F34FC7B03EA4585
-:10DDA000904B0DF8DE2257760CF24194D6AB417CB5
-:10DDB0007BECE117269D05F4D11753188AAD750F3A
-:10DDC0007B8C3AE8FFD973A5944712F0029C0B04B0
-:10DDD0009C4F1BB9C548A77D751EA2E305177C188B
-:10DDE00041323EB6EFF76A267A5930DB350407FC3C
-:10DDF000B7CA3A3FF8EF2783EB5244E39870ADA8D7
-:10DE000052088EBED9520AC739F4C7BFDC7C0EC097
-:10DE1000F974B514F3E8046F88C1787DC67B91511D
-:10DE2000FD0E737C9D69884FE7F8E67A840B19E153
-:10DE300095FD09F00AE3256B07FAD7239E8F4AB1B7
-:10DE4000F5305ED69CD609384E892C13BC1B677BF7
-:10DE50006505E887BD384E467C06059F67B9BBBDA2
-:10DE6000A7029C9D13657617BCDA5836BA3C6B77CF
-:10DE7000C833558B1B12B4D7935A95320A5FA40C42
-:10DE8000B93E93BC7B4AE27AB223B9502BC3E91D59
-:10DE9000B2DB81A897E216BD0AF6E25312CCDF1579
-:10DEA000E1749C5D17E77662DF38925F01B11E591D
-:10DEB000531666B10C76F088F3808132D9CDD93211
-:10DEC000878FBDC2FB57CDFE7346EF7F83E8FFA36C
-:10DED0006689F5217C6ADC8BEBCF8C4AA267BFA0F8
-:10DEE0004FB62687CAA6DCF594C7BB4A601D3D51D4
-:10DEF00099E93ACE2F49EBBC19D6B80840F1D7C101
-:10DF000077A8BAF9EF0AD925D9F2F16412E0D87CE2
-:10DF1000E01AA6839DEA8FA61895275FED45FC6C55
-:10DF200006A5C0C7EF65387E00C816E56B00E4ABF8
-:10DF30008EF255EF4DCB5056EB59CC804F212D260C
-:10DF4000F981640E464BD7AAF0BE7D3123FA65688D
-:10DF50004558F0DB1E7DCE5000AECE2646764D678E
-:10DF6000A496E6D75E51EB2D417BA741A5F7EC5374
-:10DF7000C0876987803CF4973303C7DB9CCF52414D
-:10DF8000E4A5BA3CA247B7C6E7AFEF2863E9B3E020
-:10DF90007BF6F403387EF23B2C36910F49724D35F7
-:10DFA000E9424D2425F4EF5AB5D8A60C74B7832561
-:10DFB000B2E469363A25BDEBC45B969B5D88F8ED0B
-:10DFC000AC04FA2F19DE4F11F20FD05B2AB6F0E243
-:10DFD000D20CE394C83AD18759D63F7213FC23D5AB
-:10DFE0001FAA0776662E766D4888175617A1F9E5A1
-:10DFF000B0C13F069673C57CC7B116AA179DD97DDF
-:10E0000000F9ACC0E8AD415CDC1EBAEC595A377679
-:10E01000A786F10880B6EC44EE909C30825C4EBC42
-:10E020001B93493E86E4B4664007215F5F9494B534
-:10E03000CEC88FC8C22600F0A6B6EEC9E85F8659E2
-:10E040004CC2EFA1989AB4CA9F2C06659BFDC78E5F
-:10E05000944D27D2E27CC1B403C8325A79CB69D837
-:10E06000DF7600C8077EF2965082F4C587BEF014B2
-:10E070001CEC43399E95E6EDCBD1EEBE5EF1C73682
-:10E08000213DC4B87EF0C23F28FFB266AA36799C13
-:10E090006DD8CBB90EBD314F09D27CB3BFC4843E1D
-:10E0A000301A268E1B820F206B44BAD956A7321C19
-:10E0B0002F18E4709970E62A9FA66546701C4538B3
-:10E0C000003D0447B89C91BF07F01C75C073D40194
-:10E0D000CF512B3CAD5E3E5FA7DFBF54167E3FF8AD
-:10E0E000BDA8078FB3B78C7A2418A398F44A58E3D5
-:10E0F0007583DE3E32AA34A6D1FA3BFD7E589F7767
-:10E100006DFA61A628EB60D797127CF6EFAC88E831
-:10E1100084CA0A1BF45F97CE34F1A37FF965E0BB94
-:10E120006B0EBB18F215F0AF82DF5DE2EB35C28FEC
-:10E130005D8AFA1FF4F6552C1E46F8DE6632D9CBFE
-:10E140006FB3E7C26759E4E276D92DF4382CA8956D
-:10E150007F592C8A7EB51AECEC53C2840693CEA468
-:10E1600013B46E31467E7790D35B9279D7927DD18E
-:10E17000C5F5A3E9F77DBDDBAEAFBFB1C35EBE9A07
-:10E180002D1C87F475F56D2E96827EAFB1DA1FB027
-:10E190003E37CA1AC1F70DD6D2A905C9CE6AC279CF
-:10E1A0002CD5988A7EDA8A7FFBE1F425309F9D4248
-:10E1B0008FBE09725DB7E88D659194DBA8183EBFEC
-:10E1C000F5526CC139D2C8F3DBE0EA5B80F64172EC
-:10E1D000AB8BFC3AE6F4D7F62AE4AF59DA11BC5718
-:10E1E00076D9E737D6FC9DF3058F85E6BB6CF71231
-:10E1F000D29B23CDC7BD5B325219F4DB03A63E147C
-:10E20000F2C5A46F93AF93B58CDB7BFFD7975A0F02
-:10E21000E3FD01E523AD7FCB541E47699981CFB162
-:10E22000DAFDE7E76CF7A7CFD9EE3521C79DED56AC
-:10E2300078FBDDB89EABD464BD240FD9D15E578B7B
-:10E240005108A870EDAB49A32966A9D77592F50EC0
-:10E250004BA52755AF5E1EA5BF63C2CE78E2BE1F99
-:10E26000BBFB91FFF6BCBA00F5FB37FF5D615E9822
-:10E27000D7B1FB422C8DF4A9A6DC68AF2C03BA4AB7
-:10E2800051393DFD128B5D05144BFD7FF3FE10D916
-:10E2900007CB1EF4A41AA0FDB25FFCD71406783891
-:10E2A000B66EE03F0A915EF748DCFF4BF64FB904CB
-:10E2B000DE2F53D915F10C74222B9C5FDEFA65A07A
-:10E2C00009ED3E69F781AF51BFBD5F76A15C36EBCA
-:10E2D0007D8CFB007954CFC0EFC99F4AA989128772
-:10E2E000AF71F270BFFBAD9F4A1CBE7DAE940FE1D3
-:10E2F000DBDDE34E40BD55BBDF21BA3DFFFE9F8510
-:10E30000110FABF629367F77D56E25ED9942CF57A1
-:10E31000F1899A51027E5B29F875E5DE15A407564E
-:10E32000F66E7E07F975D53E974DAE035E6269C401
-:10E33000EB0B4AAC01CB0FFD24AC03AADE8CEE093B
-:10E340006B15D4EF1237D0D5C533EDEDB0FF8F721A
-:10E3500086F7C7D800C53557F56EE4E331AE6F4C8C
-:10E360003E7D13FF923F5C6F9CAED8F71D8EB3A726
-:10E37000A7531C72776E463FCED41726BF7EF36735
-:10E38000C7772561DCB71EFC7FBB9200FFF27FBC24
-:10E39000B7EBDB302FB6DFA7A11C5AB5E70F6166DC
-:10E3A000C17B9DC2FDB0633FFDC9BD3B815F8EBD9A
-:10E3B000E421BBEED8A37F394587791F7BE0E37169
-:10E3C0006877AE7974EE78A4AF350F9F3F9E8DE2EB
-:10E3D0003F20BDA63CD6754DD1BAEAFB240CC23015
-:10E3E000F688783AD6E7B1BD4A1A43B76FBFE84915
-:10E3F00079003FABE05D6B15AED70AD24358BE093A
-:10E40000F0BCF2BE0DEF285332E13B592847F10929
-:10E410006C13C5F5BEE4E273ABF1E98AE9481F6C01
-:10E4200080E4BFB3DDAA23B0AE53475EC7E3EC532D
-:10E4300037E27FD57D1BF9B88E757C1BFF7276069F
-:10E44000FD3F6C1D97FF68277EDC9B4BEB3ED23A6D
-:10E45000AE78F8D251FD33531E8C85DF6689C33503
-:10E460005531562BC8570FFEEBBD3B237C7D1B005F
-:10E4700021C77E76FC140C2EBFE11AF81ACAC98196
-:10E48000473DDA5DD066D9A32F109F1D7BF859B7A1
-:10E490004E72920525D07BC7D8E09F3ED4832B25B2
-:10E4A0005E58757728ED090FADD3CA5463BD1EA61B
-:10E4B000F7AFD2FB14A7FF95A9038BA40CEBB647CB
-:10E4C00029E5723995477859A1F7B9B5A07D3DA5E1
-:10E4D00099B88EAFCE43BA1B691DCDF96B38FF19C1
-:10E4E00096F5BC9BF3ED48FC79ACC7A34A5943EBC6
-:10E4F0007B4CD807AB52D20B2C03DF32B68EC33B1A
-:10E50000C2FEA3F974D2C3DD0E7A30DB9BF31E8BFF
-:10E51000AFC79ECF67C3D76D8A6EA31B136F6F7D86
-:10E520009A59DEA7859C58C992F505A70ED7572A98
-:10E530008B270B4B86E0EDEC55488EBFB55B213B3E
-:10E54000DD2917568EE08FFF4EE1F6C7CA7D07A67C
-:10E55000A0FC7AEBE02F051D723A5F79DFABEEA4E9
-:10E5600090FF29ABFCC7FE32ACC78B02EE558F641F
-:10E57000EE6FD57DEF64ECEF4DD5F832C2FF669FAC
-:10E580008B25A18B377B958CF18D838ACB16C7EDBC
-:10E590000C4D7F310BE39B61BF8EF35EBFCE7821C4
-:10E5A0008976C8732E4676A01A7BC303DFD787FC13
-:10E5B000B4EFBD3E7C35D32D7ABADD8127351A27DD
-:10E5C0003F588DC4AB79EC3565F3475D9A6C839BFE
-:10E5D000A9C9228CA7FCAEE42F2AF6FB0CDA7FA790
-:10E5E0000DD57F46651DB9D0DF3386145BCB32C4B1
-:10E5F000A71CFDC7672B4CB7D299512E5BE3ABE14B
-:10E600008337505CA295B5A4314EC48A58EF3D962D
-:10E610007EEF6CD3581AC667F5E5B235BEEA696974
-:10E62000313C0047D11AAD144DB391C62F6E91ED18
-:10E63000716D31FE6A114F60BBF7ECD903FDD6E373
-:10E64000B752F46378BC0ADC29B263CE1772F0D7F4
-:10E65000C20E3E28C50FA19F65E8DB54947352D9C2
-:10E660003615ED89F99F76AB4B2DF438BF6C6D11E3
-:10E67000D2CBE1BF2B4D99E86A91CAE96A6DC98690
-:10E68000226C7FD8777D117742A334CF0231CF43FC
-:10E69000C5DF08F643BF074ABEB16512C0551F5516
-:10E6A00018C65BEA234BB654C2FC0B8E28311F946C
-:10E6B0000B9A936A62F2F07176A1BC07FCDD857853
-:10E6C00004F8EF6E8B52F9DE369D9EBBDBCAE9B9CA
-:10E6D000A72D46DFEF6B9B49E5DEB67A7A3ED8166A
-:10E6E000A7F7E11BFD09A4DFBD6D4DF4FE176D0911
-:10E6F0007AD6AA9CDFE60B7C58E64DFB608BDAC32A
-:10E70000EB308E62E2CF89EF3AA0B81CDA37907412
-:10E71000C4F77895CB15275E5B5B836497EE929880
-:10E720000D9FD3556E47C6051CBFF6262E54E1F942
-:10E730006E7D5905D93D2C1E4339BD4B8ADF5209E8
-:10E74000FCF244F18CA855EE66051371356FA87C78
-:10E750004A178FCFCC50B97CAA676B0F65017CC676
-:10E76000A74C473A33E779B0462F42B978702DC0AD
-:10E770005381DF65566EA133B3BF59023E16CC2CD0
-:10E78000A787E896F37F7456F9368C1383E3199BB9
-:10E79000A893D56D6BB74D35E3DE3AD1B14927C0AB
-:10E7A0003F4F1447A81BEE2F3697F0EF3E4EE7ADD4
-:10E7B000FDEF507C2B3A8ED9E28D1DCD32F9393BDD
-:10E7C0005FE171E9E3CDA5DB2641FD1AC01BFAED3F
-:10E7D00039F3CBB21216BADE22E869A7379EA58DAF
-:10E7E000A2BF3A453DB3FCBC2FF15D5C97EF4FF8FB
-:10E7F000793ED2F34E57EA72948FADAF78F475300C
-:10E80000A57F04E249FC1E2F82F700D2F1FA351EE3
-:10E810009A5A90EF3FB4DEA46F3BCDC2E7A1989D1A
-:10E82000AF77B58E1E9736E1DE85708F129735E192
-:10E8300036D7E378FDA2816FB0E17870F69B337F25
-:10E84000D1A8E3DF897CE7213CECB2D25B518B4657
-:10E85000FB0C667B73BECEF6CEF90EE52B9CDCFE80
-:10E860004CAF8BE5E27A3EF0B7531E7A86E192C751
-:10E8700015946357A8895E84673A6BA1325307F2F7
-:10E88000915F5EF473FADFD9796F3EF1919A2A4174
-:10E89000BD70B2E375B078BC06F5564C8E59E5B93B
-:10E8A000F97C5C35E304698A1FD116330C29076EA5
-:10E8B0008A66C2F360FF45EA5BD6FDA42D8C713FEA
-:10E8C0003DEDA57D0E0C8868502E39CCAA36417FCF
-:10E8D0007B843CA951B95F78D661BD47E1F123A59E
-:10E8E0003164C1A388A79A71AC0E7613D3A0A95B3B
-:10E8F000AD3C80D54D3E6C74279E477CB9A33AED64
-:10E90000BFBB2209E22B26E2DFC5224E3F57C419C6
-:10E91000EF69E571C65616BFF034E4EB230A23FF16
-:10E920003871AA8D7F9DF33C20E8EADF85FEFBA5C8
-:10E9300090DB65EA01290BFA0FBD913E1886E7BF0F
-:10E940000939FEB090E307B7FD4709E6137424DCEC
-:10E9500031C469B8DA9F96C00EBD79FA1BFA3550FA
-:10E96000BFA37B523BE267C31A1E977F08E53EB404
-:10E970007B40C8FD704BE7B5B46F27E44B91992FEE
-:10E9800020E4499190278F6D7B7EC9069C5FC24B26
-:10E99000E3B4B2F49318D7676B64B253C2BDDFBB64
-:10E9A0000EFBB9BFCDE0FD76EFF917B4EF7FE84D70
-:10E9B00057FD06E3FFB3DDB124CAA9D4449B9C0AEA
-:10E9C000F7EEBB1EEB857B9FBA81F261041E3C8F84
-:10E9D000C07CA14AD6AD87D321A857D89F46B31B88
-:10E9E000D6B567FEE9D05F59834CE1EAFBA4F8F99C
-:10E9F00021A48746BE0F9D55B9682DD6EF5EFE5CFB
-:10EA000012DB8F7BBA45C265CFF997BB6A107FF7DF
-:10EA100014BDF6640D3C27B94A880E82AFE8F93F71
-:10EA200061D87F3C7A8D3E321D3EB67C354339E657
-:10EA3000B94DA67DFA7B6E5BCDBE61CDBB58AE668F
-:10EA40008C8F4D7279F87ED66D0BFB50CE9AFB57AA
-:10EA5000852BEABCC4FF4F33DBFEACB98F65B6AF84
-:10EA60009412935C79B45FC1F7B544FB02056D3C29
-:10EA7000285E27733E88A77DD67C93E0B5723C1351
-:10EA80003C335C2AC1D31EABDBFD1F309E3AE33220
-:10EA9000D2CBACDB0E87B31DC03183C3C1E133E100
-:10EAA0002806932008E3DF3AFFF97C84EFA3FA41BC
-:10EAB0007DE347FFBFE376393D01D6676BBB4CFB77
-:10EAC000F707AB0F7A118F5BAA6BFDDCFEE1749741
-:10EAD00023F8E8EE7A99F8F67835DFEF679F9EA085
-:10EAE000FD3097F89E9377D04B7B18492358331D00
-:10EAF000D30FCC3F96FC02C04D55D26F939F726BE3
-:10EB00008E2DDFA0981538F2564A87EAA3FF5D7F65
-:10EB10004442BD1412FBD165E6FEB6F24A0CE77F13
-:10EB200087A917DBBCF4EC6939E8D301AEC75B8079
-:10EB30004E685EF6BC144F33A37915B4F07DB62D44
-:10EB40005ADF0137948B6E07D4EB68CFF5927C6166
-:10EB5000DD3C5FC0DCEF98B8DC9EB752E4C8B71963
-:10EB6000969FF519FDCC6B5DF67CC3E36CCBE94455
-:10EB70000F7DA5B675E9391BDC9AA9C3FDCDC17E11
-:10EB8000853FC5A25CCEE5F8F81837DFA834A3BDF1
-:10EB900014BEB02ADBBA3FDAE9E276D2A13F7A1896
-:10EBA000C6E337D479298E63EEA39BEBBD1593AEF4
-:10EBB00030DFA1FD5E1FD2CBCE48293D1F9BF594CF
-:10EBC000AF9FE890E70378C49CD6CD7A6A7E33E0A5
-:10EBD000F5877932E9988EA2E7F2717FF1D63A2F64
-:10EBE000EDF78703FDBD8F4139F87D770CF7B7EF5F
-:10EBF000A9493759FDD7FB5DDCDEDAE112FA6A8BF1
-:10EC00007DFF19F86007F2812718A7FD4BD92BF279
-:10EC1000261C7E8E898FF0C17CB964327F964E1E91
-:10EC2000B2CFEF1474B353C8FB2D42DE3BFB29690E
-:10EC3000D60EBAD1EE5FAE552919F87242ABDD4E51
-:10EC4000286EB1E7D51436DBE93E142B70D8156970
-:10EC5000D263A63EDEE00B9E8A745F05FA92DB0764
-:10EC60009A6CDD6F77EAE33DAAB1CF45F6EEC9D9DC
-:10EC700009E140BC05F1EDB4730F097CFF4D310E85
-:10EC8000227E036AFC908BF240E324679C76C330BB
-:10EC90003819C0397954387FEBFA0CF6D358FB0396
-:10ECA0001FCAF11DCF00C873B298C8BB08911CEEF3
-:10ECB00008717FA5C3C5FD8477C5BCFECBA550BF39
-:10ECC0000382BEE604584BE67C321E2F7A1F0D13DA
-:10ECD000AC373E73FE2E5A2CF4BD30F3F7F75D7C53
-:10ECE0009F6DCE84D1C7F900C781E7EF54E31D972C
-:10ECF000651FE75197F19ECB12A7F8C8A5717E302A
-:10ED0000D743E4E79AF6D33ED5F8D8DADE7CE6CCF2
-:10ED100057693FF738F3C714C0CFFE7CB697811C04
-:10ED2000D92F097CFED147794026BE07ED6B941F91
-:10ED3000A8075E09A4309E62AE83B90F332847440A
-:10ED4000FD33DC5C9E00DD04DC347E9CEF17B234C6
-:10ED5000C9870241373B7D8B6FA983E7CDB3DE7C4A
-:10ED600011F315DE7ED8A7235C5BAB8F86AD729363
-:10ED700035DBE9C77CEFFAA890F6E9BF2525F2DD7F
-:10ED800016BBDE15197063FBFD924EFE5CF20F0A96
-:10ED9000D923FBA5D4E964A8A88CF633F65F134DFC
-:10EDA0006DB2EC7738EDFC1C5FFF1DAB70DECD6003
-:10EDB0002FB10CF12961A70FDA1D517BFBB89B091C
-:10EDC0003B1BA60B7C5D29E61D530D05E198C61281
-:10EDD000F49CC1747A823F50E586FA67B1817CE485
-:10EDE000A3758153CEE176C67F1BDE8CFF8D781B29
-:10EDF000A25BBBDE36F71DF2041E42AC85F6DF1FB8
-:10EE00006F5ABA71228CE72E0A923D9CD7D47EAD00
-:10EE10001CC66CBF3E0DFDCD3CB11FCE1671FD6C06
-:10EE2000EE4FE734D8F5B9537F7B84BDE11941AF8C
-:10EE30003BE5E6487A7DB9DBAED707E3C723C83F99
-:10EE400067FC786CF9A7DF525782791AC60B756890
-:10EE5000D7CD5629DE193E955D11B7D0C3FF751386
-:10EE6000D1C193E7CD6C027E4D9DC6F99CA19F1048
-:10EE7000000584FB09C5720AF36D362453F5987FAB
-:10EE8000B6419DA859D7B1A698DBB35B6BFDCD56B3
-:10EE9000BBF6753F8FA75E1BA8790AE9AA2298AA3C
-:10EEA0002577CF0047701CCFBBC4753B5363FDB8BB
-:10EEB0000FEB615C6F034778B95EA9D35EA7FCCC0A
-:10EEC000043B11184D2FD8F331F7A8A9757EC4471C
-:10EED00084C75F423B244ACE517A8D34E6724D0D91
-:10EEE0002CBCD3CDF557398E73603A98BB50FF8355
-:10EEF000036EB2737A43852ADA93FBE5A53F423B62
-:10EF000070E0250FC3FD94DEBF9F41E71A7A43E707
-:10EF1000CC433AE8951878B6307FE01F9EFCC302D8
-:10EF200018B70F9F6F308C5B0E3CCE6277C1F8AE86
-:10EF3000E84371CADB6546409E09ED7CAC0BF35794
-:10EF4000629FF8DF3B0FE8EEC160D5F6A96C280E92
-:10EF500060FAFFE7F9130F219C1DE3FEB319F9AC2A
-:10EF60000BE054C80E33A20877559E4CFCC7F282C2
-:10EF7000A989F0BEE670A40EF3D16AD44A94340095
-:10EF8000075FEFE77D8947B19F3AADB12E1BEA5786
-:10EF90001FD1C95E9917BDF61096A7BFC2CB1D6ED3
-:10EFA00046F620F22FB3F05FCD47A7D0FC0E0B3909
-:10EFB000DE1E35FA0C6994F5D054C7790E7B1E8B92
-:10EFC000950EB4E9363A48B8AC743013E860B2959F
-:10EFD0000E0CE9B3D0C1F784BC1D9B5F389F5CAFBA
-:10EFE00070BE194EF72DDE9C8AE1FC618EBBA93AFA
-:10EFF0002782FBAB261F68336ED2B0EC59E28E231A
-:10F00000DF997C61F2C33FBC2E820BF8E2421F3CC9
-:10F010001705F5B999F802FD382BFD5F32029F2CD8
-:10F0200060038730E77E81CA925920427E77F61BC3
-:10F0300065A758E8DE89A705B32576D4228F4E9CB4
-:10F04000E0650B1EB5C13C68E5E4F1FD9CAA774480
-:10F050002C7CD709F6331A855D728CE59520DF2D5F
-:10F060000D7AA6E1F98607A214DFF7C49B296F6D1C
-:10F07000C65B81AB810E3F1827EB38F90E7DE9FDA9
-:10F08000C4BF2F0618DA6D5BA72F9B80FEC907D778
-:10F090002426609C7323E0FF281937A9F132E5424A
-:10F0A000F58FE7FB657A943F1351FE9E89EF295156
-:10F0B0003644BD7EAA07EB6C9387DBBD9CBEB77B55
-:10F0C000B95DB8D1DDED45FE1A28F1D27EAA59EF1F
-:10F0D0003C85DB6DB33C229EFCE97A1DFDFB591E8D
-:10F0E000DE6E7B5B2AFEDA448473373D731B520C61
-:10F0F000F703FCE5491DE3F1DE752C91C9EEBBDD9C
-:10F10000CBFD7FEFC11FD03E526E598CFCCE480321
-:10F11000F46759AF05809A2C901F00AE8174DCA172
-:10F12000FBC90E5B10A9FDAB3A65F8FAE29FA39606
-:10F1300075F2FE4349F472FF8CFC8B35C29FAB2BFA
-:10F14000F5125F74B4BA7B702A8B3CD9DCDE8DD4A7
-:10F150008E9A3F8B7E5312D639057E133E717F23E4
-:10F16000791ADFDFC032EE6FE013F737F089FB1B4F
-:10F17000F81DF737B0FCF33683CAB8CF8165DCE7FA
-:10F18000C032EE6F6019F737F0B9AFAD999EBF6A24
-:10F190006BA1EF8FB4B552F93C0FB7B3597932BABE
-:10F1A00010F0DC7583DBC07DEBCD627D1E334A73CE
-:10F1B00063B08EBE08F73B7D4FDFCA703EBE288F1E
-:10F1C0001775466F6557C2B36B5AA80B0359DEFB20
-:10F1D00083F4F4A9DB19C60D7649C9668CD0ADF667
-:10F1E000FCE27C15F47359F4DADA1C28B77A1E595C
-:10F1F0008F793B93F4B5B1A5DA50590F552D7BC0EB
-:10F20000529E50D1A3FAA1FE7736EC5F8F7C8A70B4
-:10F21000A0F1B6C173E0FCB5B0E4E95246E73706A9
-:10F220004ADC29A4B3AB70BD2622FCDCAEBF88AD9E
-:10F230008FA29F3C417757217F40FD34A7CB93ABF2
-:10F24000BF1937A9A60D6F375A3DB9FAA4EA31653F
-:10F2500094FEF0BB344A3F1D6CBD8667C936232F30
-:10F26000633E912F407E5A978BF365978F3FDFF473
-:10F2700072BFECD7DEDA8BBCF0BC48F069972F5E2A
-:10F280008F71CE81C932C50B7A5DD00526E5B69661
-:10F29000FCBE14C6FDD6532AC3B8F35D1E6EDF4C08
-:10F2A0009C10E2FAF2DB5ED297174CF8597B0E9471
-:10F2B00027FE381643FDB799C5FC4827C92D3C6E7B
-:10F2C000FAAFD5A7E63442F533A73D9C43713FC161
-:10F2D000DF293C6F04E5B51D574FC038C707CF7213
-:10F2E000B9F480A0B71E575F0BADE7B420D90D8CE1
-:10F2F00075935DB036AAD2BEBC9CCF9F6E97F615B3
-:10F30000ACE706C59B0478DC7F9FE125FFFB238FDC
-:10F3100038A7D647F682DB97D0B2E17D7752267EBA
-:10F320005FAFF953988ABF395845E76693152AE5C8
-:10F330005D6FAEE0F1B940E8B214DA09B71CF071C4
-:10F34000F910F452FE55AA62EFE1DA083E650DF9B4
-:10F350003D652CAC27BC6BB246795CF037FADE1CFD
-:10F36000A13CEDCD4CAC4BB34C7E60C7B84F7E3367
-:10F3700015F7BBBFAEC5C4D921CA8324D346C67313
-:10F38000BC03070308CF57CD7347FDEB0250BF7D89
-:10F39000A916C37598A2D5D6637CB043ABF5225F9E
-:10F3A0000526D77997901C1ACC53A6F36DED15DC82
-:10F3B0005EC5EFC897AC9D1DC2F32C85429605B281
-:10F3C000AB24B4733A1A286C8479BCB6BCCBF69CD7
-:10F3D0000B29AF5D599043707630C38BF5930D2A9E
-:10F3E000E9A5C2A0378D765CA11937C494638B1F41
-:10F3F00091BBDC9EB79CDFACDACE758C4FD8CB7955
-:10F40000C22FC873E4377FEA31F755EC7872CE37F4
-:10F4100037725736C29B8B0795F5E1F3D91EA96A5F
-:10F42000C479166A7E823BAAADAB41F9359EB5AC74
-:10F4300045BAFBCCF03AE09C52D1DE87EB3E455713
-:10F44000E91CC35436B00EFBDD2CE8BCABC4AE27C0
-:10F45000EFF228627FB7B6DA3B8DC7B99296F14BCF
-:10F46000927E96B48C776A578EAD3CB1BBC056FF86
-:10F47000B41DA5B6EFA7A7CEB07D3F737795AD3C81
-:10F48000B97796ADFED47DB5B67265FA425BFDB331
-:10F490000E2FB495A7F57DC5567FC68B4B6DDFCF7C
-:10F4A000EE5F66FB7ECE1BAB6DE573076EB4D537A2
-:10F4B000ED66A75E9CE2FD7CF6B207CF79D9E282C9
-:10F4C000767BDC694F7BFFB15E5F87722DEC26FA9D
-:10F4D00056518F4379F50DDC9FF1CE89E92857CA43
-:10F4E000845D931534CE41395A13F6923E5083BC55
-:10F4F0009E1A9C4776C7293B401E9D8556201BFCC3
-:10F500001E40B9DC968C97B986E0F669DD7466A179
-:10F51000265C4F7175B3BDAA192C11C2F1746ECF60
-:10F5200080B788F57C3AB4B7CC63BF2CD311EF0118
-:10F53000F0BBEEB2F85D23F9594EBFEA64FDA85363
-:10F5400064E6C7678F146FC16745CBB3B5985E0794
-:10F55000FED5158887ADEE78730FF4BBB5D4CFF721
-:10F56000C1847FD555D24B7C3150A2927E61AA5E78
-:10F57000B1D012DFDAE4E57A25E0BD83FC3BB57457
-:10F58000E6611DF1BE56A5B8C36689C74792B00EA5
-:10F59000A8D776CD7AE39DEFC07B6FA9B7D00BF2E9
-:10F5A00028F698DBC0FDCFED02AFA55A652D585C5B
-:10F5B000605F341EC4E7241DEC0C7896976F3B887F
-:10F5C000CF9BBC3CBFEE8CD803B5284BBC73B8FDB9
-:10F5D000A74C71A7D6E1FA691C8E91E84CCDD9C130
-:10F5E000F7A9CAD4D791DED0DA3E210FD1810FE935
-:10F5F00040A227D18F2F1224BDE1C38D1C2CAB520A
-:10F600002A00DF23658684791735E11DB4EFE64BC8
-:10F61000DBED55F03737215E230DF6F50E787711C7
-:10F620007CED128FBF7665EB4FD702FC5D79A53973
-:10F63000183BC1F844A345DE6C17FAF42B3ED9D42D
-:10F64000FF246FE85CD7B4217B07E87F877C2AC260
-:10F65000D7CD506EF96EEA6648EF3E0D5613EDEDCC
-:10F66000EF2689FE4D7BF73AC15B75A54DB4DFF5FA
-:10F670005EA48AEC5B5FEBCF33E2CFD7AF30E3AC75
-:10F6800091F11A9EB493F43D2B75EB6857B4EA6E72
-:10F69000A327833CA8F2703B6623E67D203C22EF43
-:10F6A000A34BE0C3DC6F7BCFCC8712FBBCD76533A9
-:10F6B000DBBEDF757955E347B3C77DE0F7252CF056
-:10F6C0006E8471102F1D9F36D6C769FF8FF1736A44
-:10F6D0007FAFE8A1F3C0C27FA91276D22C0A9A01AB
-:10F6E000DFB819F909E763FCE22CF4362FAA47BE0C
-:10F6F00034E31DAF7973A85E2CC99416B2575CA68B
-:10F70000DE924F4C259875B719A7249397EB35F8DF
-:10F71000F7009EAB38B5CB7E5E6962B7BD7CDA0E72
-:10F720007BF9F494BD0C56F311B40B1A19C7CF9999
-:10F73000BBEDDF1BCD385F1D3F67E185914F70FD4D
-:10F740006B3BD7CA84FE37E3A9C5BDE91A14AF45A0
-:10F750006BEC7AB540E8F90287FEAC0A29E4E7D7FA
-:10F760001C8E1C42FBD18CBF3CEFD36DF96F661C25
-:10F77000C529CFFDAF6C63F085FCE58487C7171200
-:10F78000E0DFB41689B845317FBA14FD99C564A786
-:10F79000B59C86F2E9D7DEC4075E325AECE720DE7C
-:10F7A000AD571F97743E4EC232CEF5E5C90BF8F443
-:10F7B00053945762C6314C3FFD1F01E322E4AFCDA5
-:10F7C000B1E75A1EC338D24B1E86FDCC559E3EDC97
-:10F7D00006E5D5C52AE5416A3396FFC88F7140FC1E
-:10F7E0000EE59A127D3CD1FF932EF2D737087A3678
-:10F7F000CFE798718F5C9FD03F3EC9DC87F08B3C90
-:10F80000573FDAB967EE06D96CD3733C9E66C6CD16
-:10F8100026F7DABFF732295783F59BDA9492B95D60
-:10F8200065046B2C71F533C47A4D599CBE753194C7
-:10F83000EF63A92ABC2FA252D045EC90FD3CD838EA
-:10F8400026D1B981714794580AEA4F79C4FEBDC2E6
-:10F85000715EEC0CE7F931479C37A4B07796C0781D
-:10F860005BF41609E5E796C560C343B9C227F28782
-:10F8700027B149487F7395602C8DF8FD83427AC388
-:10F88000F3EA692F2C417DFE2CCF4FD14ED5B7D551
-:10F890004159FB8D42FA490BB0CACAE0505CF87B73
-:10F8A0002762ACDD351467DA03EB5A3611FD6B2F96
-:10F8B00043BDF273585F2CF7823F8EE507C11FC727
-:10F8C000E75EF0C7F1FD2FC01FC7F23EF0C7F1F9A8
-:10F8D0002BF0C7F1FD23E08F63F9DA404D8D2FCF78
-:10F8E0001EA7B2C6ED86E254FD9219A74251F2BEA0
-:10F8F0009BD3FF60BC2AC1E35563F76398FD503C7E
-:10F9000070583F222EF8F60DFF792F9E9F5E316DC5
-:10F910005D179E83F5BACCB818CF7F30F39A4DFEB1
-:10F920005BB1F75ADA0F76E71F69C1F5D85B1DA402
-:10F930003B86DCAE8486F2D1E97F997E97D3FE3593
-:10F940009F4E7DE4473BE02CB493BA29EEB3C9C582
-:10F95000CAE95CACE48F215F38E390261F3FEB2BB4
-:10F96000CD789E69303F56C4673C2CE5C578995BDD
-:10F9700012F314F99B24C2A08BCDC8CF967CE36010
-:10F98000459AE21CC1A041F697047619D9695A221A
-:10F990008A71A8CE11F26177093E5D9BEFA67B24A8
-:10F9A0003AF3F9FE7F5D512C8AEDD7E74F8F5AF37A
-:10F9B00063CDFCDD43A1E9DE7E4B7FAB43A5A3EA2B
-:10F9C0002905F4AA3E8A5E553C3C7F7DFDC1B3BD4E
-:10F9D0009897BC29B8B40FEDAB4DD1089D5F3F900F
-:10F9E0003F9DEC8FC1FAD19994BFAC04B9DDAA4414
-:10F9F000BD64B7AA38FF8AA1FA66BD1B857C06F6EE
-:10FA0000A3F85C20D84BF53C6A9CE21F9E08A3FD3E
-:10FA10002A8F97E70B04C1BFF6DAE2A6421FFBB8B4
-:10FA20007CDBA427E2D86E5354D5511C6D2AAF223B
-:10FA30003CAF17785E9F67EAFD18D91B0F0A39683B
-:10FA4000F6B35EF8EBEB9BDD6477C55BB38DBA5C18
-:10FA5000CAC7FC09F2DFA6E05D5ECC6F77E7578F7F
-:10FA6000DAEFA363F6FB6A6DDD59D4EF83187F7676
-:10FA700087966AD8AF6B84BCFBA7447F9FD7BE0430
-:10FA8000CC69B4DFC54C7D9B8A5AF7899D4F3FDA1C
-:10FA900089670D6FB742EF9F8779BF2A4BD6FB95D9
-:10FAA000E1E71656EEE3F7506D55FBC8DED9FAA92B
-:10FAB00094F1FC43B6DFD43F837EB8CD5E2914FCBD
-:10FAC0005428BEEB68AF94A05F69B72FCE3A6C2F75
-:10FAD0004FEBB39767BCE8B4578C3FA0BDB248C8A2
-:10FAE000BB3E90CF3C6962404539104FA66A10EE8C
-:10FAF00046D6BB16F7295D22CEBC48E8AB8BCDFDC0
-:10FB0000477F36C15FD8ECB7F989E67D1A45A2FF79
-:10FB1000E2BA43D7B6A3708D9BF68F4EFE65F1FC1B
-:10FB2000076B484C3AECA046C37E1EF562879DE306
-:10FB3000B4876AD41ECAB72C70C41FCC7D4A9C27D8
-:10FB40009ECB758EFF59C735FBDB097A0BED15F39C
-:10FB50009E02BAC70BDA17AB692916A4FC2DCAF3AB
-:10FB60002B5CC38C9E0C743CD3CFE5DA30BC25CF24
-:10FB700023BC9D2FDE1504F93D2805754A4A2FE167
-:10FB8000F95F284F162E87F990BD7C82F6A1CDFA39
-:10FB900039D9BD942FB6B341E2FE6392911D62AE96
-:10FBA000F3CE203F3FD378AE9492B17D4B298D4F59
-:10FBB00070950EAD2FE0E928C713CF2FBBA4DE7ED2
-:10FBC000CEA7D1616F98F470B1E3FDCB3E7E4EDAE3
-:10FBD000E483B7CF7E71D22900C70A29591F504E3E
-:10FBE0005E4F5AF8C37502F910FF3E8EA642FC71B3
-:10FBF000D0FB9046F901D9FD773020C9063F4BD69E
-:10FC0000CD06BDE81F385382F225FEC91D5DE7E22F
-:10FC100071C5817F45A3CCE3A99A5B5F3C54F6FB99
-:10FC2000E7503922C601D722C9D7DB726F01C0FB6A
-:10FC300003911FB0D960DB14CCAD94B56DB192A126
-:10FC40007639D84E1AA55D9C6D5333B40B9AED00EE
-:10FC50005D9DE63D1FA5F8E4DF65018F757C15F11C
-:10FC6000A6E9413AC7334FD530EFE18BC2316EACD4
-:10FC70007927D836D7A9C3DB01D86B4DF8E5CCF08E
-:10FC8000A7F0BB757CD728F0FFB3F131567F6EF13A
-:10FC9000FD33C307D5D78D1B79BE08978BEECBD02C
-:10FCA00083B2A59F5B0E7C4CF16BF57246E77454F2
-:10FCB00097A1C580CE2BB4DBC80F57B3EB34B40388
-:10FCC000364219ED808DBDDD14A7AE28BBB50B897A
-:10FCD000BE22ED67280F26332DFB3EE877B2A662E1
-:10FCE000260E53CF3D2463DC9B7D89D13991AC0333
-:10FCF0007E7EAF45C9AC1FA37F949DEDA5385020F3
-:10FD00007BFA8FB9B1CBE3C126FC819A23B51827C2
-:10FD1000571B590C59519552AC0699EC7446FB107F
-:10FD20007E63EFF578DE12141FE927BAEB01F5AA1E
-:10FD3000888B8FE724C3BADC5A23FA09C9A7548AEF
-:10FD4000BF8F47D31488B2A222671BC25391800E83
-:10FD500024849FC7B52627E4581AFAAF7A87B76379
-:10FD6000BFE5E703C097687A3838845753AE8C17DD
-:10FD7000F1F2E8627B3C990DC09CA17DD56F17DE46
-:10FD800083F18471C3E437F7AFCD7B74B2DE61F1E8
-:10FD900087695FD3AE37FCE2BE0ABFE31E8492A040
-:10FDA000CB768FC130BFE1BB71D2031E16F3BAC947
-:10FDB000BE584C7683E98FECC48A18FF2F66FC5E30
-:10FDC0002B67FBE9BC3D8B72FFC4E30733AF0ABE70
-:10FDD0002FF31BA46F3D50063C4A6EE6CD87F70516
-:10FDE000328F8BAC95988AE5A1F1D2B44FBF418A8E
-:10FDF00075C5A421FF77BD16A3FC01B626C7662FE3
-:10FE00009B79A8ABAF29199F03CFACA1F3401AD2BD
-:10FE1000E3EABC32B29FC3B9FDFF07E5EBFB9B36BB
-:10FE2000CFF5A2FCC4FC8559F05FA0B32309F2D63C
-:10FE3000F35121D32D7699476DA13898E7A3536CE0
-:10FE4000EFD36DF6F3834650AEC371C607747E2EB2
-:10FE50008369EDD8AE86D9CF097A3ECAB7D9E943CE
-:10FE6000FD17D9DEA7C19EB1DE4F3172FF01A69703
-:10FE70005BFB3F7584FE2739FAD732F63FD46FAE6D
-:10FE8000ADDF0E95C74793113FADBBD31E981AA89F
-:10FE90002D0A4C1B257E1FE0F1C70DD1168ADFD736
-:10FEA000326078A093F33E3DAAF0F36C8CEC3656AA
-:10FEB000648FDFD70AFA958122907ECF53EDF782C7
-:10FEC000CD61CE7BC2ECF6D073C82830AE1CAAEE52
-:10FED000A338FEC7411DFDAF91ECE5BE3646F1E308
-:10FEE0003981FEEB709FFA82CD77BA3A668AFCD7E9
-:10FEF00002C62EDDFCC05CB4EFFBC479BD8E884C1D
-:10FF00007889D78EA7F337663F71379B88F2302EFA
-:10FF1000F3FC04FA03E3F7E515DCB52903FE9CE7DF
-:10FF20003B1B0D295E66A19B3E19F06A1DEFFCC2CA
-:10FF30001EC5328FB8874DA3F1849D3B38DEB8CF04
-:10FF400037DEB322EE648ED738CF3EBF46B746F3D6
-:10FF50006B14FC6B8EF72CCE2F037EC71C4FE67400
-:10FF60003338DE05F6F9357A349A5FA3B8E777704F
-:10FF7000BC719F6FBC0DAE9604DA6DDB24CEFFDD45
-:10FF8000815F75E0BABED7B03A4AFA40D8C5176368
-:10FF900003A877B1CAC75B50E44DADB58CB713E485
-:10FFA0008021F2DC0D0FE66F68544EB545E97917F4
-:10FFB000D8D906E56F94D3F77BDB6254DEDD369348
-:10FFC0009E663FE533F9BD33A7CF9632DADB870370
-:10FFD000DCCFDA96AF5D7E15EAA51A3F3F0F39F305
-:10FFE0001C6658EC5F30880FFA70FFE5325689BA0C
-:10FFF0006DD20E0E77A46E5C0AD7CF5F79A8AF0DD5
-:020000021000EC
-:10000000CA1E974B477D0ABC10CFE4A73E16E07E80
-:10001000B8C7CDE53D9BC5EF315C20F40A531A24E7
-:1000200017E2E3E26CDAEF5FB8C8086980B745927F
-:10003000F48732A1A7F0DCCAA562A99C767E0435BC
-:1000400006F41B319414DE4F7469D1E126D4CBF150
-:10005000D025E41FC4A1610EF473A9D09335AF7A03
-:1000600018E63BB0B96E8263D122BB3DBFCD97D6B7
-:10007000D03ED9561961B83E0B1BECDF3D6ECE87E2
-:1000800071C7BD050BC6B8C780EED2CA9047EA8CCF
-:100090004F3E1AB0C7218FB38A5BEAF0635164D434
-:1000A0007B0CD6609BBC21FD369C8E393CAFFB9906
-:1000B000F0DBF6513CCC84AF404D4928AF0B9BF7A9
-:1000C000D9F29A00B1640C9B7178A6DC57897E88BE
-:1000D000733E3BA5FBF247BBB7A480A9AFF7978B54
-:1000E0007B3DA5E1F37E2520F26F07E73DFB9932CA
-:1000F00096897F78DC75C16125B6561FC28B8987CA
-:10010000FF693EEA12787FE6FCF7ABB9FF5664BBA5
-:100110003FD3BC17F892C1B2CA540B3D5FBCCC4D63
-:10012000F60C33062A90EE8E9C1BE0F7B899F64B3E
-:10013000FA2519ED972FDEBF516CCBDB14FD8EB481
-:100140005ECE3C42CB39D0A13C77CC2F91F83E56C5
-:1001500001E6B985F9FBA3763BD396E7B6FEC04F1F
-:10016000258CF3DD81F978967DEB42F0E7516E1630
-:100170002DB7E7D539E132F3AA06CFD1CE5EA4DDA3
-:10018000A7D3BD89DD78114DD78E649C59F223CD5C
-:10019000F381A63FED3C17A804F9FD795171DEC249
-:1001A000190FBE5E4E6A2512E6A3A6BC35F09C92DE
-:1001B00093A8C2A3EAD72BC97A7CAF8C9FD58C7841
-:1001C00058DCFAED18C6EFB4DCCC71E9C5427F9F6C
-:1001D0001BE4F18E575CE9628C632FCDA93D373863
-:1001E0002D43FDD6EF527F7346B88FFEB220A7BFD6
-:1001F0003B843E777EBF588CF3E51532DD6FE163BB
-:10020000A1945482FBC6DD33E93CDECA9DB14CE7C4
-:10021000DE9E0A2716042D71075F193F7FCD58EF28
-:10022000D988AF8D7FBBB3F77E4065CEDF82244790
-:100230007314DEAFA5FD6599DAEFFFF8793AB7BC24
-:100240001FCFA9A09DCCEE9887FEDCD6C1324B4AC9
-:10025000181FCC16E5642BFF3E58AE9A578365A451
-:100260004120B29782733B915EB64A4C10E33C5EEC
-:10027000DFC5EBFF427C9F73E15B3FBE05E5FD748C
-:1002800037F9815B853D62C2F77290E7CDBC3C06D1
-:100290003E5BC5F720E233F299F0D99A091F2FE7A8
-:1002A0001837E0BAFB30930240F0FDCDBB06F3886F
-:1002B0007FD0C66257C11CEE88EDFDE92D8CDA2790
-:1002C000ADF461B6BF28C7581B24788ED2FC4265B6
-:1002D00041746FD8C6198CFAC900C7C64CFD98EB9B
-:1002E0007A308BCBB10FD1769E86EBCAED3FC5D36A
-:1002F00017C5FD7FADFA7BD76920473A4BBA9B32D1
-:10030000D1F7F7437C9F3A7B8478F5CF053DBEA4B7
-:10031000C57F8070B46BB7D2FDAA6E89DB0D1B67F9
-:10032000F633C9D2EEB7218E6F80BB07EBBBCFE6A9
-:10033000F79E8600EF986016AAE6F06FD48F30CC57
-:10034000EB0E458F505E68A8BA9FF89D8E2A1470F8
-:10035000BA427FCD2BECB39F07BF320FEFDBC85102
-:100360004CBA7BAB13E946192A131DF5E4F0F6BF2E
-:100370000FBDD5990491BB0BEC17BC872359C0F373
-:10038000469CF3FBA5807747D8D88BEB320C9F9E19
-:10039000FE1FDF02EDB74EE4E76DE6C87D4D572244
-:1003A0005D5E1824FB0BDE3759EFBF795DE0EBF59E
-:1003B00020B79FB67EECA5EFCEF518895E7F27DAD1
-:1003C0007F0E7AFD5D263A017A7D06E765A1D7F7B3
-:1003D00059667A7D7E047A7D21135E9C6585193B82
-:1003E000707F56FD64DE6EEC4FBD68F68EFBE1A9B2
-:1003F0007C725392563326D9CE979AE3544A893F5A
-:10040000072DF2DDBC9FFB9B41DEFFB07E674CDF1A
-:100410008172EC24FA1DC0F938FBDD1FE4F0CEB97F
-:100420003098C8746FD1CE10CF1BBF5BCC6B24BE8D
-:10043000792AC4FDD991F8E681D020DFB050DED80A
-:100440007CF3AAA80FEBE0C5FA63F3CD6DF4F49545
-:1004500071BEA163C8B386F30D4BBE487CD259C2AE
-:10046000F9227FEB9F3B31CE31C847C90FEC7C941A
-:10047000FCC0C6477FD9FA01D577B60F8F704F956C
-:100480003EC8FFF109380FE34CAD9D9FB3E927BD8E
-:10049000DDC3060E7828CF96E7B5FA9349839B0D06
-:1004A0007D0CEF3D2C1778D8853E18FA39D3459C42
-:1004B00049ED630B43C3F939549DAEB6DE23F06BAF
-:1004C00031FE47A1F8D4D0341CAFFF74B4BF465AF4
-:1004D000A76A517F5BB6511DCA40D763E9A1CB43E0
-:1004E000FCBCEBE502EE9CBF795BD0FE74F2FB9C9A
-:1004F00095BFFAEBBDA3F4739968BF20F4B9F97FF7
-:10050000412833FF5F1CB2F37F35DEBF9981FF2F97
-:10051000CBD41EF8FFCBA10CFCFF05F8FDCA50069A
-:100520007E9F1DE2FD8F85EF7B05BEEFFD82F86E9D
-:1005300017ED6F0A7D6EFBE0A65066FBE03BA169FC
-:100540002785EFF611F0DD1122781E24F8437A900A
-:10055000E2D85D33D85EA934231C5BADFD7875DE2F
-:100560000FE0FD7D09E87ECE275DB14CF7CE40BBA4
-:10057000DBACF09BEDAA439A99BC7D2DFAE7775C42
-:1005800014A4783FE8C71DFF643AB83B94413ECFBE
-:1005900091B91CFA20F820D9815FA0FFDE4CFD2F15
-:1005A000137436965DF098A00F98F7BF85A60D9747
-:1005B0007F3DE27752768413FB4384AFFEF928AF88
-:1005C00076DD9823613CAAC8484BE827EC15FA660B
-:1005D0007248E7E71944BB5D6A5AC27C965D2D9A62
-:1005E00084E78D2CFD1D0E4D1BB93F271C00DF6FCE
-:1005F0004224EF8CA7B15DF5901DF899ECA44BB2A5
-:100600008D2321D23FF1E7496E9F6697DBE63CE4FC
-:100610007837E5BDF86666FE1D97BD41D594FF7F2E
-:10062000B2CAFF17429AF9BB52D4DF67D53F00DF49
-:100630001B02BE3733C1E7C4CB58708E177A1EFA3F
-:100640007B3F939E72F667FAADE63AB9512759E2BD
-:100650003A5278D0EE656194DF1D329D435A20E412
-:10066000C98299D9C26ED7FCD8FF1D224E7EC7F22F
-:100670005B6B70BFBBE726AD125150D0CCF59EBE70
-:10068000FC148A7F0644BF4EF807DBBB7B4FC77B59
-:10069000C761DC2C1CF7BCD92C8D7E6316DA0D14D7
-:1006A0008FD0E877BC723CDD518C9F6E94BA9B96DC
-:1006B000A25E9D1FE4E74AA28BC6B8BF6D9D8D6EFA
-:1006C00059B47A8CFA6BA9BE16E8A6FB2F4EBABEB7
-:1006D000A7BB29537E492C2C9B76D199A3E2351ACE
-:1006E000A1B89689DFE1E3F0F5AB89B74888EF5010
-:1006F000B5A4E1D1AB10D009DA4B72591FE5337DB7
-:10070000A99AD30B03BF64F4FB333ACDF59E13CE05
-:10071000FBE27099F5461E4FD4739C57C07D2F8A1B
-:10072000CF06B91CA38A507EF7706EC6B8BFF9DC3D
-:10073000D0A615A92E6BFF29BE3F33983F1D8BA273
-:10074000BDD5CA383DB2A897EC30BAA7DDB29E4BF2
-:10075000C3DC7FFC4156FCAB61E2EF18DD4BC834D3
-:10076000EDA4E603EDAEA2762AB40B9D7CBB919F6F
-:10077000E6EFD7C5F4B8E51E34935FC727920CEFB8
-:1007800099F157304D82F58F84CC7D424E07B705E5
-:10079000CD729236C9E365DD3C2F5F37E984CB1516
-:1007A0002DD06BC8958C6DBF79FE05D1D3A1BFB29A
-:1007B0004414AFD487F213788F5A8EC2CBC0684FDF
-:1007C0001C227DA19D21C5404FB5CF7DE27031E354
-:1007D00047A5E8F7D5E63E81F9843D66192FA428A0
-:1007E00087B27FB06C78A3502E1D2C27B1BC4BE88C
-:1007F000C9ED37CF7DA23D4872EC662B7FD4083A15
-:10080000FC67D35F8FDEAEE13983645425BB6AA3F6
-:10081000831E7E157613FEA76A8914F2C5829B0695
-:10082000543CBAE22D8984901F2644DF4FE2FD79C3
-:1008300013668B34D5327E4F434F740DF1650FAE86
-:100840000BE36909189F1C5A9F54E6F5294FD1FA0A
-:10085000F875FE5DC632F9DB3CFE1628E7FCAC7984
-:10086000787CEF2141AF07C33C7E7450C8D7AC6899
-:100870003BF953DE7A99E2C759F5B24D6FD02FE0BC
-:10088000517DD5466F2FE724F6872D7A01962F5E8E
-:100890000EF3F09F1EC9C1FD979A72750DFADB3FEA
-:1008A00012F61FACD30F495E5446FC0992DBF1C728
-:1008B00033AE9BC0CB58EBF67C5B2256E71A79DD52
-:1008C0002EBB9CE7D33BDFBF28E4EAB1A63F7F0FF6
-:1008D000D965857780EEF3EE2A5B4B715833EEEAEB
-:1008E000D95B932ED487F201D705C2B3E95C8A6342
-:1008F000DCE73FFDBE46E7443EF664DC4FFA87C0C6
-:10090000F391B6266A070B4CBFBF72054E85E7B15F
-:10091000D9CEF199E711BEC638312C8A2FF912CA07
-:10092000A1A54D0ADDDB7005B3E7537CCDCCFB6A96
-:1009300035F3E378DE578265CF43365C9274FC7EF4
-:10094000048BCDC373F4C37E5742EC6F7DDD9137CA
-:10095000F1E5A625B13A51EF3DFA7F8AF0B748E7B5
-:10096000F277518CDFDF7369FCF2589D653FFA85A1
-:10097000BF2B19F3262FCA32F1118FD54D1C8E8F44
-:10098000A571C9ADE963E3E564F1B044AD9C97A7F7
-:100990000FC78373FE80B1AD88E7AF039ED1EE1C15
-:1009A000091F508FD6E385CB15FA3D99794A830B01
-:1009B000F741AE6C94688F09F01B1679710D732D99
-:1009C000F03AF1E8C4D7958F323A3770E5ED218AD5
-:1009D000B73D67E2277D1EED5F98FB2796791EE500
-:1009E000F95B1ACD73E1CCCAC7F1DE84443B485BA6
-:1009F0003E5FDB3EE05216CFC2730B30EFA323AC59
-:100A0000BB6D3FD0099F137E9FD02BCE7D31A6A614
-:100A10002B500F1A59625F700A8B89FDB12C4AC79F
-:100A20002DCB2C6F9DF7CD997476456BE3E0B8D84C
-:100A3000BFC41283650DCF6B3DA96CBD14FEBE3AD9
-:100A4000CA7FD7307E796E077E5BC0CCDF1B3268F1
-:100A5000BFE90A81BF46F0F8F0B7D0CE03E184FBCE
-:100A60007A0B0C9F1EB4CCF3DD6EA95E9CA3CA5A10
-:100A70003419DB250F285386C3BB3ACA7FBF10E861
-:100A8000F07D2B1DFA26F27B659D7831F175659618
-:100A9000D8379CC2A67C16BCBC848A731AEDD7904A
-:100AA0009D3B2079E93CBCB98F037F4DBA4174B6B8
-:100AB0006695083B80CFDBBCBF8BB116B2EF178BBE
-:100AC000F358AFB858D30341BEAF5365915B37E4D9
-:100AD000D4B46659EC6E735FC7BC2FCAA4E7AF7974
-:100AE000836985D3A1ED3EA8A13CA604E53129592F
-:100AF000CB75C447177E3A9BEC9EF5D8BF12E0FB3E
-:100B000055BE271FEABA541F5ABF4D573DDC3D0D55
-:100B1000CAFEAFFF3E499DEA3984B79058B71AB173
-:100B20006E267CFE0AFEDEB27E3C7E562EE26762B8
-:100B30001D47D213E63A9AEB867614D2AFAF5CFD2E
-:100B400024D3EFF0B143D503C8A789A84A39740963
-:100B5000E9B50EBA678BE9BB70FFFD8A5697EDF7D2
-:100B60009712784E1FEB6FF409BF2446ED97E6F31A
-:100B7000F6AC9CDB8D83749F84F6963C20E60D8F4B
-:100B8000C375EB87B6982706FD8D437DCFBA2CE35E
-:100B9000940E1F77C4FE1CED94C17D93582C669172
-:100BA000D70F65713DF96EB4BA57CE107F319F4BA8
-:100BB000BDB945AA253FEC68BEB729D3BDA4667F61
-:100BC00083F7C60DDA896F3F71A868C84EDCEC7AEE
-:100BD000C36E27B237BE909DF872D61B4FB4033C4C
-:100BE0001FFED143FAEADD7A3FAD436EEBF9ECBF6D
-:100BF000F0BCAD8ABFED47F63DDD7BE36D2DA4F97A
-:100C0000482A600E7F1F4C8F4988EFD7F0925E8C88
-:100C1000DFE92C1D02E072D59884F8BA55F8A3409C
-:100C200067A75BEF677D2D8BDB5BE6381E2F4BE202
-:100C30003963B35FA083B59457DAC0488F98FBB08F
-:100C4000263F9BFD0C64D9FDE093E0DF814CFCFB6B
-:100C5000B4DCF2A7EFA0FDFA9442F9A05F8DDE406C
-:100C6000EF2F6BBD929E97B75E43CF4FC478DF9254
-:100C7000129F64C17AF535FDFEABD703BDAEDAEB4A
-:100C8000A173652BBEF5D79B913FBDADB0EED8EEFD
-:100C9000EB57DE3E0DBEBB27CA64BF7615F37C0E54
-:100CA000F75A89C7FB75773DC650FE3F378B9AA828
-:100CB00000800000000000001F8B08000000000002
-:100CC000000BE57D097C54D5B9F8B973EF2C496662
-:100CD00026933D210B37842548C049202128D60979
-:100CE0005B632510C40525C0844008109280568798
-:100CF0004A654200A3468D75C3A5BC8162ABADFABF
-:100D00008252A56DA4137101A518ABB5B820417826
-:100D10004ADD12411EA3D5FACEF79D73927B6F6612
-:100D200042687DBF7FFFBF177FEDC7B9E7DCB37CAB
-:100D3000FBF9CE77EEAC7096E4BA0A09F90EFE2EF6
-:100D4000266485731A9649AAD3448A085963A3FF77
-:100D500056093973F8E6D4C5898444DBED6EFA840C
-:100D6000581AB3EF34D132D92F9347289063C8A2D1
-:100D7000F23C0AAD0C0E712984240134218C074801
-:100D8000FBB585244212A09DDBDD60A765C54F5CE5
-:100D900000430A3EB74852795B5EDF7C0414FDD9FC
-:100DA000423221E3613CE3FB167C7E8B6A2985F7A6
-:100DB000E504360FF17E0E7F3F87CFC7168A61F3B9
-:100DC0004830F6E364CF65D2D066EF3F8FF5B1537C
-:100DD00047B992004F9E5C80847499CB1D842CB4DB
-:100DE000BF72481A47A1CD1E9429243EF3A75DB9CE
-:100DF00004FFBE1B06FF5FE1FA700C2112E992BEF0
-:100E0000A343CFFA460A0EA5F88B2A91031BB229F9
-:100E1000945C651326D066256637E0B37378A263C9
-:100E20009866FC0B5C12E2EF75C5E58079964F97EA
-:100E3000CB0379D87DD2E5D0CFF4AAA25BD97036A6
-:100E4000924CC822F66FF2BABAA37918ADF7FBCD6F
-:100E5000EE11948E8B6CFE00CC6F1151FC5D366CE4
-:100E6000227D2721549522FE1E9DEFA269B227CA3A
-:100E7000A96B47BEA3F3241BC90BC369FF0B253E17
-:100E8000809F96E97BEFF3E29169A7AE80657411CC
-:100E90009765186DBFB0AB722619875576E0A7A588
-:100EA000BCDD229FF9786FBFF47F957E7D797171EB
-:100EB000FE4B940C142F81D209C067A34DC867550F
-:100EC000CDFA764BDFBBE46FC409FD2AC77BF10D79
-:100ED000F32477313A4F6F72A9144FE7BB542CCFEC
-:100EE0009A766C1AA1E5D9845C01FDCE9E26BB8260
-:100EF000B4758BCF443C74E2073D7240A26B3B98C3
-:100F0000DBB5FF62C05BB1597D04D69A4B6E9F9BE7
-:100F100008F5E35D80E772789686ED098176A9B6DB
-:100F2000C008FAACD373CC5EA5E1BB83C5C7467BD2
-:100F300029BDB69A484D387E22A411E9FAC24FA2C3
-:100F4000B19F23F748012B9DFF74F99B3F4DA4F3FC
-:100F5000A9FAA9D96D55715926A0EB4C3793474290
-:100F60003CF6E9149F0B092B1F23E545413A7E55BA
-:100F7000FEE1122BEDA76A9384722AF04FF1FD81F6
-:100F8000166FDE86F2D8A08A78D73DA79D59809F3C
-:100F9000299E3F8880E70FB478F6BDF7F6D817345E
-:100FA000ED5A5C8E44E07352400ABEA3A8394D2628
-:100FB000C78E27FDD72DE099F587C6BE3082907B7E
-:100FC00088E76E2E4F4AF9584A278578C2E9815240
-:100FD000279383E9F2A7489F93C5B20AF83AE8FB42
-:100FE000D84E398C1CFC462E053C130FED6C52DF9D
-:100FF0007B8FB92C48FFAD16E2013C6F1D620B34AC
-:10100000D2AE3A7E725E4A17D247BD7F32D0F1151A
-:101010003379448D3C5F874F26C3296396F9248436
-:10102000827E437D514419DFD76E28093FFFDF835D
-:101030001CD37924AD2326958E1BE7279E4018BE2E
-:1010400010ED56D97A662804DB07E3E8FCEA54532E
-:1010500040A2EBCD97183FDBCC0D9E74DA54699F0C
-:10106000E34F27300F19E7A1D2F929747ED9BE18B2
-:101070002C0FF32520CCF1C5211CEE4BC7FA11BE75
-:101080001C84237DD9F87C946F0C96737DE3118EBC
-:10109000F6E5233CCF7721C231BEA9D82ECF5782A7
-:1010A00070ACEF527C3ECE3717E1F9BE3908DDBE99
-:1010B000F9589FEFAB4258E0ABC4E7E37D2BB13C5E
-:1010C000C1772D960B7DAB1116F96E4438D1D784BC
-:1010D000B0D8D788ED26F96EC3F205BEBB115EE825
-:1010E000BB0BE164DF43580F0A08F010CDE5F13681
-:1010F00075898B4A0A70B80A7C1C49EEBEE2F6A8D4
-:10110000D2E5390AF64EB4B3988857DB5EB43BCDCE
-:10111000611CD0354C7F3D5C3F7FEEFEE0BE51A4AC
-:101120008F6ECDA98DE544EEA397755749309DFE8E
-:10113000B36EF71C027A81E426EAF8B4BF7E60EB56
-:10114000EBE2FA6BABD2E991817F1B88DB4F1F95F5
-:101150004D785D827EB6A94A69200CBF8D8E33E33F
-:101160007BE7BBBC248ECE2F26FBF80BA04F66FB83
-:101170005D7F9A02FC9297F8CA14DADFD08D2618A8
-:1011800081AA1257C714AA77D46904F5E2362A72E5
-:10119000B0DE6DD17A7B9A1DC7EC28216DFB86A14C
-:1011A0003C0D2F60F6A7EB12902FCB4F86915BB3CF
-:1011B00041DE829242FBF3AF21E4116133A0FDE6F0
-:1011C000C5BF84FABEFE2C4C8E9AC9F3363A91EC18
-:1011D00056754A1485395B3CCF47D1574604BC53FA
-:1011E000A26979D4A3FEE7018E6E0B4C89A170CC65
-:1011F000EEE0F3D49C92B1C1AE29765A3E7F1FD95E
-:101200000B68CDEF54A73A6879FC21CF5ECA06A4DB
-:10121000B0CB3BD5A9C27C024D4E3A9FADEF1377C0
-:10122000232D177FDA2AC7120DFD2DC4BB53431798
-:10123000C784CE6909F49F19D7B9F265785FE98A46
-:101240008ACBEB4F9F6DB06E5827B5238FD0756555
-:101250007882924BC327657192A0437E1CD8A175FA
-:101260003D0AAC73DBC67807D22FDA550243F64C41
-:1012700027AEED2AF0B18278B26C1A86F22EF88E83
-:10128000E277F41C87166F92D06B356D7991F15B24
-:10129000F66F86DFF7383F47C2AF0D7865D2D9E5E4
-:1012A00078615CAF1C5F03788DD4AE298EC9A7111D
-:1012B000CFDB4C641FB555745CCAA74CAE889F3613
-:1012C000BD89F3F7D9F0EAFB37C3EB157103E3955A
-:1012D000A889A82729BF8E263991F50DF417CE7E4F
-:1012E000DDCEF94DA3E72CE02F36BBA89ECB89AC11
-:1012F000E7AE8E3B8BFEE27AC6C2F5B818EF413EF0
-:10130000DE2BCEF22DA0BFEC9B4C7E90B312E240C0
-:10131000B920A9899C4F5CD1C02733655709E81BC8
-:10132000328AA01F1D9317F0C33E65A85F2D90A1C0
-:10133000192865C0E390DCC0ADB4EB6CEA67289473
-:10134000FEB4AB20409BEA322DA6EB8E15F2E6AA46
-:101350004CD5CA9BB0F77DF228F8227EDBADD98C44
-:101360005FE750FFE56DCE6F7DFD48D86EF3DA2163
-:10137000DB6ED5E8C16DA9A95816ED23F1EF19C1AF
-:10138000BF1B37102FC8C7E4F07EC31B7132E7DBE9
-:101390001E0FF0B9FF07C405FE4CDCC60F503FC559
-:1013A00051FD24A17E62E367F8A27FE9A7E53FC76C
-:1013B00025737DEE8ABED2F1FF8E9F7F45110BF320
-:1013C000183AD9D521D3FAA1D40EA920A793E9DCE4
-:1013D0002700BE2C487795303AAA934900FC5E8AD4
-:1013E000B7A009F4AFC911003B63B1B47A409E893C
-:1013F000250ED7FF8AD37B346E00B970C5A8F9409B
-:10140000D493715F95DA29FF6DCE764543B99B96EB
-:101410005B52E9B8F15D84979BED283FF46F085269
-:101420003148F706601F45D96383F6C37ACB7E281F
-:101430006F059FE402DAFF5D67F66DA488991BE7EC
-:10144000E989637C7D12F8DA338A6E5073FAF8F911
-:101450006CFE8090CF3E7972E50B79AACC437DF883
-:101460000DF42FFA8BE4DF3CC3F5A7237E60FF4623
-:10147000F0FD39FB377CBE7F07F92F8C2CFF51FB29
-:10148000DFD8B28396D7A4CAEA71EADF3986BCD521
-:10149000A9D0B28DFA9BC768D964EB54A05D1995A9
-:1014A000503BC5B7873A79B0FFB04D6065F883FD12
-:1014B000C7C956A994E96B35F6F2B103E13180F35F
-:1014C00059936AC1F1A2460C8F05B97272BE228A85
-:1014D00014003BEE2C76298BB1BF2E7219EDEF3C38
-:1014E0008E2721D7A0B79ECA03BD14AFC07EDD6A88
-:1014F000237E477C5FFF508E2DE8D34F84EFE3AE11
-:10150000E57BA6D60DEED8E120A707591CA5F52648
-:101510002697651924B001F48487A82EDA3E8A88BC
-:101520003F2AB8B46CE6A5995F4BC443E77FE06BF4
-:1015300019A1349C041D74BF57E69682B00FB4986D
-:101540006C01B0A525436CC40265A7296005F9F8B4
-:1015500040C2755A0A6202A0FCA60D298EEDA2EBCC
-:10156000387560AFDD1B86FE57792BDDD3C647C6C5
-:10157000636FBB052FBA008F0FA91B5DE047FA53BD
-:10158000158C3BDC024D357AFDEA786637A93F348D
-:10159000379EC2594B7A365A80DED989E80F91E1DD
-:1015A000F1C8B769A9BB6E29019355CBFCD321249F
-:1015B000D0A8F5AB047FBD1BEF5D104FE143DC8E7F
-:1015C00050B1EC1C09F1AAD189F1E09796D40F69CA
-:1015D000077FF781F5C4BDC48CFAA01CDA7B12DA50
-:1015E000F2817F1F72EF7AEC4EC0A795EE8B418F90
-:1015F0008F3F6C5729BD2A0AF726C17AFE6498BF2F
-:101600008015BE9B102FC67DF0AA78BA0F068538CC
-:101610008E8C837DF029F7DCD820F2564258F9AE43
-:10162000F0DD88FD88FDF07BE660A62BAC1CEAF1BE
-:101630002DC6AF90D8BE969825A6FFB81DA5FA6511
-:101640003DE097BE8676D36395B683BD39E51EEF40
-:1016500006BB1D49DF88F9503C8E287784A997483E
-:1016600079383DF1403CB3D71566BA5FA0F5D2EAB0
-:10167000C206985785C32E01DF89769BE2993D13F8
-:10168000FC2CE25572EC3785407F880F865BFF2289
-:10169000A27CA98D476D02594B62F87287F15722DF
-:1016A000E1EB90B9B50CE67568A94C1A693FA7BC87
-:1016B00013534898F7057C07F886D2A53E818DD74D
-:1016C0004BCFE1E1F177687D8D7B9AB98F9EFDEA82
-:1016D0002BA3E681FD9E0778D48CFB0AC7DF3181FE
-:1016E0001FAB5775D17ACBE27B5D642CE8A92F0B39
-:1016F000FD0E888BF5FCB611E8FD5307C62BE655A9
-:101700009E2E6C1CABC167314123B968EF032E9547
-:101710003E9F37626392DF1E198FC7381E6F8307A3
-:1017200093301EF322F2CD20E331242F1EF98DECED
-:101730008D7207211EF917D90D7E038CEB45FDC96B
-:10174000E2C9D7B9D8BCA20C7EDE3C5F9D4EBFC4B7
-:1017500084241248D09495368CCFC684147C6E9421
-:10176000B75F19E44DE03F123D05FE8DCF9FE7784E
-:101770003F54B95C85B8A1253ABC1F9C96C0E824AB
-:10178000CA6FADF7EAC6FBEBB7B26EBF2CE07F7352
-:10179000FA9EF24E4A8178D53C8B7FC460E45CE0CF
-:1017A000E7AD6FEE7741BF515F59C3CA5F37B74F9F
-:1017B000D49E365FA16AECE9D5F246C07B8CC2F5B7
-:1017C0009B41EE3C6057293E2F06BB4AA718731673
-:1017D000BBBA88F83B208E6C1C5FD853237F09FB73
-:1017E0006AA49BE08384041E37E4F41371C348F2B7
-:1017F00025E4EA5DE0DBC2FEF837C2AB2C7ABF47D6
-:10180000C013BDF488227EAA1FAF2D91034442FE6F
-:1018100040FB78E85E09FDCD60A515ED72556514B5
-:10182000C667ABF265ACAFBA5D46FB19A4FAA196E8
-:10183000CEE74F5C4F18E3B32544724FD3AC7BD651
-:1018400084285DF9EAA577FF693DC4978BCD2A8C82
-:10185000775065F166BF4746FF95F6E10E427CFA88
-:101860009E8BDC60CF043F1CF4C8286FFE376537C1
-:101870000CDBC9E3D1079BF30332D059F2F68EA3F8
-:10188000E640FF552AD0E1EDD42D2ED07751DFDE92
-:101890005F5E8EFB47AF9A8F76933AAB74DE515CF6
-:1018A0004EA70E29BE12ECF891163381B8D191756E
-:1018B000A7509EBBD637B8A78DE88B2F8BF8B031D9
-:1018C000CE6C8C2FF78B2B1BE2C9821F8C7C725540
-:1018D00004FE10FA2A127F503DB630E19FD06342D9
-:1018E0007FBCC3D73975C896DB1B291E6296C88892
-:1018F00007C1976F7F73F3CF410F4751FED800FCAC
-:10190000FCEDAF5E847D08592E858D23FF07E737F8
-:10191000BA4F744FCBEDA3CBD5DEE5BD6510FFF913
-:1019200035AB7BCBB07EA35D89ACD706D65BD9093E
-:101930002C0E6EB43B4679F8BEEDCEBCCA7B73E18B
-:10194000FD79954B03006F1962AB01FD6BD4134613
-:101950003B21E6639C674C482681F1DA79ABD8AE2F
-:10196000CF4E58B0DE67738E0367FD4C14837E70D4
-:1019700002C12F7D3F2AD084E3359C5F8EF36F98A0
-:1019800008D047DC5D7E585F6A34C60F5A33587BF7
-:10199000F99268E68F4F88C775CAC221FF320ECB15
-:1019A0004D7C0DE3E2BD4F02BF35794C5170AE3036
-:1019B000D5A1EC87904BEB1413B1923E3C09FF9DEF
-:1019C000406480AE17EB24D877E6DB2C39E89F3EE5
-:1019D000930074B889EE0B29BF1F3820EFDA4697C1
-:1019E00078C03D3E369C7F2EE082D4B5A817AEF479
-:1019F00055213CFCE3BF6681BC5E2F793B605E9D58
-:101A0000F3AA6E2FA4F3A9DF2DE3B9D282EBDF1E78
-:101A1000C9F669FAF349D969CB85384A9314ED06BA
-:101A20003D22F0D8E1B0A07E693ACCF460D3518970
-:101A300097D93EE2055E7FEA3D07EE3304DEE97AA0
-:101A40003A613D9EBBE3703D629FF12FACE75DE8DC
-:101A50002FF27A325CE80F005FC97DF3971D0AAE62
-:101A6000AB9B44BB61FE3E1E0F22EF45A1DF2CE87D
-:101A70005BCFF94FD0B78ED3B7BBFDF41D17D2F6AD
-:101A8000AD9E783C65903309AEB7FBBD18E40FB14D
-:101A90005ECA07DD80EFBDEDCC4EB4BEEF60F872DC
-:101AA00014E5C2FC847FED4A607EB271DD157C9F37
-:101AB000FE7502D34BE0DF429C6271FC94AF130AC7
-:101AC000C3B4E77E2DC5F3B780971217F93240FAF9
-:101AD000F02CC611E38AF7A212F5F255C1E30AEF22
-:101AE00099C93C8CD3D2710B34F35B1B5F12959870
-:101AF000D47FDC7F818E898903F2A59E8EF58ABD15
-:101B0000598A25BDFB620CA5A9FDE5DC2867527B3F
-:101B1000C757703E6F94FF33A60622D17E6F90BDEB
-:101B200087E2296CF2922E6B4E7F79389B1EA1F4CE
-:101B3000CE4B4CEAAF4F064BE78989FDE83C31714B
-:101B4000003A0F8B2F9F04F5B0FEF402DCE75D082E
-:101B500065D0139661381EF2654F1C096CA78D1273
-:101B6000781C45CC07E21251F4BD1F256623FD25E4
-:101B700085F8CDB49C90EB9640EF0F820F7EA49D2C
-:101B8000DFF7C007570CCC0741F44B56717AAF1200
-:101B90007916BB06CEB31804DDAA60DC3326778F36
-:101BA00037FBDCE956D79F6E7503D3CDBB1AEA9B92
-:101BB0002CE44BF4C38B2B5361BC579C9EE3B1F4D4
-:101BC000F99E46AE4FB229DD68FD8B8932EAAB9FA4
-:101BD00091F3500FFFC064C2F97753FDBB3D3B1C2E
-:101BE000DFFB9578FAFE99CB089EC7D1F5F9195F0E
-:101BF000FA25787EC3226282E7A96A23319D831E7B
-:101C0000BA8DEB09CD3A6F4B0C6397357AE80EA885
-:101C1000A7FC781DF0A34D752903E9A107CF5D0F3F
-:101C20003DF83DEBA14706E6BF73E6AB27C3E903EA
-:101C3000C1C7625F10295F88CA23498FEF3F2E21F9
-:101C40006E3C0F2B71DA98DDDD29A19D6D3A9AEF7C
-:101C5000C5B2C3864A41D8E193BB58BD3C25BC3FC1
-:101C6000F86C623CF2EFAAB6D56E459707E2477A68
-:101C7000DCE939E91A4EF5E20CD98EEB4B2863F119
-:101C800043B17EAA67674E4FE67153BA9E844C8675
-:101C90008704EA0FC0399A93EF0F628B159DDF2FEF
-:101CA000F076835C2E41DC3B2E9140DA0DF5EBD7CC
-:101CB0008D82F3FB388FBE7D1269F942C64108CA96
-:101CC000433CB5DF10C74A2835B4837DC83868AFB8
-:101CD000799EDD7F3F713491EF272C2415EC0A911A
-:101CE0002B06E41BCD7EE244E220F6139F278AF305
-:101CF00071BDFD6A8B2261E302EB92B8DFFD651CCA
-:101D0000FABF32B75BD3BAB2313F658D43C5788134
-:101D10002CBB6D33B3FBBF1FE7311155B3BE84D26B
-:101D200068A26AF60F49E5F1BA72CABC21BAF6692F
-:101D3000DE61BAFAF49AF374F5990D05BAF250DF40
-:101D400005BAF6D95400B4E59CE61FE9DA8F68BD00
-:101D50004C571EB5E51A5DFBD181C5BAFA318FAE7D
-:101D6000D0D58F6D5BA32B9FBFFB27BAF64D3CEE02
-:101D70006BC4CBC5494C3F37294CEF34DA0B301ECE
-:101D8000D964D7C723D338FE4B6227E7421CBCE98E
-:101D900083FC5CC0F70BCE0B302E1E892F8C7A2C67
-:101DA00092FE343E2FE6E37DFEBCC5047250B79729
-:101DB000CAEBF9B46C7F6733ACA9398F9DA72A842D
-:101DC000E5F788F315F17EEFF98AE266F155A79DF4
-:101DD000DC1A862FD292F4EF093D29F82812DE048E
-:101DE0003F9E0D6F9EEF096FEF49649E761E15FCB6
-:101DF0003CDBF8DEDA24133F0FF65E93C4FC9D094A
-:101E0000D1E889BB501ECF55FF8B7950FDBF3409F7
-:101E1000F7136F2CB801F4FF2EAB1BF6649FCF7B3A
-:101E2000A3FA7E15DA57B3F626772ED02552FC7B1F
-:101E30006D52BFF8770D8B7F47EBF0B64CC8BB21D6
-:101E40000ED7E4FC1AE3DF4D1677EE60E2DFCBA09D
-:101E50000F383FE474EEA52F8F9F47DA07F908D9B2
-:101E60002FC1BEC7AEA870CE75B67D2DDDCFE6C240
-:101E7000796A2BEC9B34FB1CBABFE5FB9B28B40BA7
-:101E8000D4EEDD9184EB22FB55FAFC0CDDF7DEAAE3
-:101E90004251D83F8FCE2FB712B7CD22233DEFC18D
-:101EA000F76E22D745C9102F0B1E989CFD2FD9F332
-:101EB000FF481A707F68B4AB673D9743BB5346D762
-:101EC000BF218CDF653C87EBF5BFC14F93F03C0E23
-:101ED000F1B489DA45388FEB4862F679D361B64FB1
-:101EE000DE74744E2ACA4D52D180E77083D5371DF7
-:101EF00049FDFCB58EA401FC35B1FE357CDF3B5DB0
-:101F0000CE6B8378E3C99005F12613961F59BFCF96
-:101F10004C02484F96672CE8680E6DEE04FB6C2669
-:101F2000C6BC623516D66DDE27A37E2289ACDE4F95
-:101F30006C8DE0E7C416EBED569C476FB7124AE391
-:101F40000D764C6FB752E6E9ED569A576FB7D26BE4
-:101F50000A0C764C6FB786FAA618EC98DE6EE5345C
-:101F60005F66B0637ABB356A8BDE6E8D0EE8EDD6A8
-:101F70009847D718EC98DE6E9DBF7B83AE3E3F78C6
-:101F8000ABAE7EFCBE9FE9CA859D0FEADA2FDBFF70
-:101F900034E6DF4C3CB45DD76E52D7AF75ED28C246
-:101FA0003B214F7B099284900B4F3CA5AB5FC2FD58
-:101FB000B48B7A7EAFEB87B4B27C6B3FFD0FE8F554
-:101FC00011F15AC0395148CF4BE994AE7501C91D82
-:101FD000A4CD96EFDE5904F3F8E4FD4BF6413FCB78
-:101FE000B6E8F3B49707F4E57A322C16F4433DE5EE
-:101FF0008B00E5939590BFADD16B2B498313F321F3
-:1020000006C967CBF6CF2598F7E9F774427EBA5830
-:10201000A7E0370FE737313FB1DE95D4EF0BAA7D4C
-:10202000EBF4D0FFD83EB2CB027C5BBD5B220F4A03
-:10203000FDD753D37ED7E6F430EB32AEC3E877BAA0
-:1020400093F5E754D3653BC6F54FBE29BB597C5089
-:102050002F876BF6B378FE9A27248CAF19F121FCF9
-:10206000D2487891FD6C9F509F4802018DFCA91CBD
-:102070001FD654BDFC9D847FC07C1E960390171410
-:10208000A5461BF9AD2848FAE33926572FA7463C49
-:102090003BDC43C2F2954AFF83795413762E65E404
-:1020A0002B23DEEB76DF6501BD78AE785F64C0BBC5
-:1020B000383F28A1ABB584C9831378A5FBF2A5C925
-:1020C0004991F7ADAB9325FDF9F2D9F7ADAB93BFCD
-:1020D000DFB8C9BAE401F6ADDD102FA37EA5315EED
-:1020E000D63F3EB6F72BC989716816FFF2BA6D2C40
-:1020F0005FC5602773537576B277DFFB8114680282
-:1021000039767A6E83F9D43A3D2D007FE4F4DCAE63
-:102110005D6F13C50BDECFA1766A6718FFF0E5642B
-:10212000E11795635C6453096B6F6CB7335941BC1D
-:10213000772415A5A2DF79349FD94F47D1807EE758
-:102140009DFC3CE736382F1CD197C7733B3F57A106
-:1021500062E701BA6D3297A76AF37CEF498EC3F14B
-:102160009C939EEA847CE72697C925A9E03F9BF0D3
-:102170005C74A3C75EBA2B8FBD97A87B8FDD3B92A3
-:1021800001DFE0CFDB95AFB57CFB32C525F41B69E1
-:102190009D2F27337FD74C3C36D0BBE23CD7FC4148
-:1021A000BE0DF4AD22B95DE1F238CD3C4F6A0A3F75
-:1021B000CF955DEC7CB757CECF922755E7F4BE9410
-:1021C000ACF117C4B9EE954ECFCB404F9FE2B7822A
-:1021D0007FE9B385DFFFFE89D3F156BE3EEA682270
-:1021E0001FE1F8F2A0E2276F25635CCE8FF98A37F2
-:1021F000C8EE13109F1B6CBCEA6872BFB8DC512D8F
-:102200001F1AE58FFA9FC763E17C22768882DB097B
-:10221000C59D0BFCDF0CFF9E84F1D513F07EBFFC47
-:1022200053359EE7D3AA03E6D38A7EE6C679BA93EE
-:1022300059DEDF17003DA35C1B654D3FCEB3F44371
-:10224000F194DB601F14FEFEC1F0E73EC18209E796
-:1022500016D78C4AE9E73F46A50CE03F9E393C2A59
-:1022600016CE9345DCCAD8CEE64BC8D0DE8F698E39
-:10227000D38FBFB9809513F9B8CB6319DFE7F2B2FA
-:10228000C80314716BDB4CE281FB0E3FE3F9D9A26A
-:102290009FDC1407B68F8B9F929B5208E76912EE62
-:1022A0002B37C749BAFDE5F1E4925C58CF30DE7FA9
-:1022B0006E0AE3D36DC3587CC69807F9196FFF59AE
-:1022C000F214849460A3019F16590E8BC7B1296C38
-:1022D000FEC76359BF227E56752FBBDF25E26622FB
-:1022E0000E483D83B762A85E39D6622610D75A2AB7
-:1022F000DB37031FF6DE9FE3E7EA2EFA1FD8CBCACF
-:10230000BC72CC3FFA57EF6F013E63E2FBDBCBE9D7
-:1023100029BDF6D27D8EF7B86632FC0CEEBCBD2B23
-:102320009AF16D8FC38EF16C63BB6A4E9F161EA728
-:10233000007D0D76235E260DE1EC4735C7FB99C382
-:10234000560FFA31A5D198CF21CE3F14CA9FB1F1D3
-:102350009806EE0768F3A567C07DA2DEF30F95E04F
-:102360007B09763BBEA7A824E8802BA18A5B82FC70
-:10237000B22E4BD7A61498EF45921BEE0FA454B87B
-:102380003A5212E11EA18A62B6399B388BA13EDF18
-:1023900084F57197BB369B21EF5A2570924DCC7412
-:1023A0001C071DE78E946C5C7F8B7F6E470A6D1750
-:1023B000ABF6906179A0475C3352418EE7B1FC7572
-:1023C000E3FAD6A730BCD937D17D03E0430D9F0790
-:1023D000BE3E85E501513D7313D0A34425BBD8BD56
-:1023E0002896870A69D6982FE866F9D231906F94BB
-:1023F000C3F40CD4DF15377523C88F902F99E31BD6
-:10240000F85E9B0F7F07C77782413E053EE9008D4E
-:10241000900FA1CC24C8D7B32BC2CFF7314EE77AA7
-:1024200067F93D30EEECC98D98E74EBEF9EE3BB949
-:10243000089C5E2627F47D027188A844A67FA354D9
-:1024400015F531714998676A53DD35508EB25FE0FA
-:1024500092C1EE59F979E1121351A8BC4DE5FD780E
-:10246000E611E9C35C166765FA55211F0AB9903970
-:10247000728AC07EB23FEA17B5C4D0F54CB51FC012
-:1024800073C4A8E10D2570AFE0C545AC8F9F45C86A
-:10249000DB3FCEF558BCEC4D35814F4F8EBDFA4237
-:1024A00006D2F93CB8A179DBA6C3AFEEBB88C7CF93
-:1024B000215FDC7FF8554FDE3F9F5FFED2FD875FD7
-:1024C00085FCF27F9EFFDD12E8F1E394B160DE4609
-:1024D000FE17FAEC90EC3D7423C5FF1594A97C051A
-:1024E00000155281F466F94397733CFBBFA678B69A
-:1024F000F5E1F98AF6FD88BF43663A6F3ABE790A7C
-:1025000043B5F927B13C1F2380FD5F696B9D0EFE2B
-:102510004DB7A5671C8CDBFDDC5F33FD549F1CFEB3
-:10252000E92907A1FC7744E971C0F313EBDE707869
-:10253000E87A0FAF93F1FE1BDE4BD6E4039DE07CFF
-:10254000353DB5FC08F0D5A2F5DF1669FD6CE24B10
-:1025500042BBBB3C20C31DDF5EFDB7F2D118CE7479
-:10256000ACBCAA2D415716F6789535FC3DF1CC54FC
-:1025700046F7E58F6FB3403EFCF454EF1730FE0989
-:102580009E6F70629703F757623E8B1FCFB7C07E76
-:10259000F248BB950481EF954E33C1389567A64448
-:1025A000F9D6CBF9D038CF97F6C4607F4BEF953191
-:1025B0008E5449C7F251BC7ADB97B3FDAD611D4B18
-:1025C0000FAB33405F2DBD45227E95B55F47E9E6F1
-:1025D000F5DD8CE72BC6751AEDCB69B2CE027AC455
-:1025E000685F961077F364B05BADFAE7CBDA6FC340
-:1025F0007E979DE53C262195DB9B2232F1BB1C8812
-:10260000330FC37CC148F6E6C47A26941FAFB721C6
-:10261000FC74BD0BE11150A614CF2B7777BC948EC0
-:1026200062DD590476286AFF54DB35A4CF7F56B6A5
-:10263000CD0D3EA4025FEAF3212B389E85FFBC8CB2
-:10264000DF33389BFF5C01EB1C201FB26290F990D6
-:1026500027F78DB7C1F3C2547E3E3591E203ED6F8B
-:10266000DE6B2A39BBFD8D849748EFAD82EF1C8469
-:10267000C1B3909B23DC8E2CD93167F3103A81A62D
-:10268000E73ECAEA42BE647108714E25A76EEE8429
-:10269000F5CBC410FFF3933789867F8DFCB98CB8D6
-:1026A00099DDB1B3F76C3C2ED1CB97EDB7235E0526
-:1026B0001FC18D02532AC060AAA9B8FF7703FA7D13
-:1026C0001FA0555FFEDCDC95057A6399215EF0B9A9
-:1026D000147EFFF5C3D4616CFDAA6706E4452C2582
-:1026E000E59B595CBD159F9F505A5FBA11E479076D
-:1026F00093A755CF3EF10CE8A915FF79AF13F4D499
-:10270000DF94D66418AFF6914D4ED0EB2714BF136B
-:10271000DEFF5B400E7B5F777BAA24F2E2ED901731
-:1027200056872C0602E69F057AF2BF1F31BB208E2A
-:102730005AFFA83568A5F8A8DBC5F048CB4759F97A
-:1027400066C457FD6EBD1CAEF8D5BDC92AEEE7FDC7
-:10275000E91C7FE9A0AAEB7698317FB4EE4DD90D44
-:10276000C3D4931E5C9FF17D984788D2ADBE4DAE19
-:10277000B4C4F6AFA71E8F05E4AC7E17A353BDC14A
-:10278000CFACE17AD9C8EF3F1372CFF99CE205E3F1
-:1027900061229F9504987E6E7AECFE7147E9BC3EFB
-:1027A000DDF1AA53CAEBE377025997145F27DBAA3E
-:1027B00016419E41243EFF9CCB45AFDEE77646DDC9
-:1027C0004D2706BE7F3B83B5E6A0F3428A8FDA6DC4
-:1027D00066B79F3EAE7D42F6D8C14F7ADB8ADF777F
-:1027E00058F9C48B6F5D40E7B772A73971265B86D5
-:1027F0001DF4B3A0533DF077411F5D563CFDA2058B
-:10280000F220E1F9BAF83EFAACDCD96181BC4A2386
-:102810001EA7B67558987C19E8D4767406D8E5A634
-:10282000C7CE58800FFEB64722E0421ADFAFD9F676
-:10283000A213F407E009EC87A0572FFDFAD12D3839
-:10284000EBF713B09D0BCE6922D1EF5A984B12F2E1
-:10285000F793BFA7E3D7BC6375C3FA6B9EBCD609D9
-:10286000EBF84869607CFEF34DC9608F6BCCFE6469
-:102870001742F6BC66EB8F91FF96BDFEE364827A49
-:10288000D39306F24BD79906EB5BFAF015B8BE6A04
-:10289000E245FEABF9B95C0E7EE269859486F3F3FE
-:1028A000D3D3989C7CB4DD8A9B828F2C847D87E374
-:1028B000CF32CBE323ABD10FF9315F2BD5C4583ED8
-:1028C0006D6374EA4E357139637AAC9EB7AADF71D5
-:1028D00033EAB18F333D2920EF140FFA78EAEBD3B6
-:1028E00053B8FEC3EFA5E07B94EFA6C27368DF691F
-:1028F000F6448DD3BDC7F35AD9F8D7F1F1E9BCA39B
-:10290000212EF751B27EFF2AE02569220E463A8930
-:1029100096BF22C9FD8E5B90AFBE7C93E995BAC08D
-:102920009C52ACEF340753A03ED071B9847A81FA3F
-:1029300017E1E47A8799CBB5BE9ECE5391B4F8DD0A
-:10294000C3EEC555DF43DB69FC903EBEB1F43DCF1D
-:10295000EE934F915FB1CCE09F0968D40B49697A3F
-:10296000FB27DE270F2785BD87D5A70FFC88B75A21
-:1029700073E0970F821CBF6DC57B86B54F98F17BC6
-:10298000399F3CBEF7AD6B28BF7FD226E457AF67B7
-:102990008DF25BF3D415249CFC7E92584EC2CA2F54
-:1029A0007D1E567E1359FEFEFFB69E5D1641CF5E1C
-:1029B0009CA6D7B3D49F88BD90163FFEF5CAA1B898
-:1029C000CF32E055E0D3A8370FA5AA885FA3DEA4D5
-:1029D0007F6F120D1E05FE045FAEF8CD2A1CA7976F
-:1029E0007F057F0AFEEDE54FE37AF57834D62B704C
-:1029F000E7A8B08FEEE60D747F0DE7AECFC978EE95
-:102A0000DAADF638E3212ECBF36EBA5DBC1CC7CA33
-:102A10003D4996CDA03FC4F39E289687D05DDEE366
-:102A20008CD3F8F547DB6527E4D57705C2E74B6023
-:102A3000264512DC128D54DFC8BF5B63CFF2C1BEE6
-:102A4000AC959DF72C69BCCA09FE74777BCEEC79F6
-:102A5000E0C7EF97D1A7EA8EE6F9557E8F9246F14F
-:102A60005AC5964C4E10FF7DE06757B5AF9C099B49
-:102A7000C6252D7A7C54DB2FC7F3ACEA7BCC7D7C5A
-:102A800041C0DF0958C0CFAA7958FF7C05E4550141
-:102A90007D0C7CE4053E0A730FA359F0513EC967D3
-:102AA000FB647E5EC5F5DA74396FF63CC85FDCC73F
-:102AB000EE499C6C97C96658EFE3FCFCCA9F84FC06
-:102AC0005947F9581BE7FC14F86C5464FBFDE96F97
-:102AD0000F17DD489BD43EF3EEB88728FCF499B776
-:102AE00047FE01CACFFE35EB5DD2BFFDD43D5F2D61
-:102AF000C43CCA3D5602FBA2EE3D2F67DD08E5DF70
-:102B00005BDDA8FF37B0FDB17F8F03ED7A7726F349
-:102B1000FF9A9E3B33AE0BEDD346A4D7D369EC9E10
-:102B2000EAC9F6BFBF2F413E5D3B5D15D85DBEEFE4
-:102B3000AAFF7D14EEAFBB9F3BA3DB57FEABEBA917
-:102B4000E3F795BA1D641EDC2FEE8E63F73BEBFFB7
-:102B500030E917705F71D5AE0E4B15AD9FFAC76F98
-:102B6000C781BEE97E8AF913D4BFDD0A2EF59E0720
-:102B70000EB49829FD3E079F6F0821573D682F83AB
-:102B80007B18FDF1C2F0D04DF100EBA278A9013D18
-:102B900019091F7FF9B7C5C7170B61FCDAF689045D
-:102BA000E2E97D78913CECB903F32EE8FAD9F33DE4
-:102BB00067C6817F74B6F59E4A63F765FEAFAC3792
-:102BC0006EC8BFEB7A19BF3F90A6E23C8D7CDF9FB9
-:102BD000AF9FBD1ECB4F3ADC38DF41CA7BFE90FF72
-:102BE0005BFC3DFBDF76BD67A3F77E4E6F870BCEA8
-:102BF00053BA9FFB368B9CC3BAEBFE3F5D77AF9F0A
-:102C00006372DB26D0F9BD430257944891F3381F15
-:102C10001AA2DF47CCE27EC4ACC46AF41F667958BE
-:102C20007CA58914EC837B6A7E8F8CE70E984C43DD
-:102C3000F1D079797E00F3B614FF88FB208FEBCAC0
-:102C4000556EF69D2FFDFE6A56726929F86F071BB7
-:102C5000E9BC68BB830E93AB892E61B647467F8F74
-:102C600042F4F3FE32E552CC0B995DACDF675C6356
-:102C7000D8375C354F5F7F25D99E04F97757D698B2
-:102C8000315FE80A43FBB5435CB8CEAB48C32616B8
-:102C90009F39373CBDCAF1D41F0F03E3AD1F9EF827
-:102CA0007E127379D4FE78B37AD9FED24A2BB8BF9C
-:102CB000C5F3E4D60C0A9F84EF3BAD7C68815FAB23
-:102CC000877DAF53D32FE245E0FD5CF12DE864C46E
-:102CD000BBC0AFC09B910E5BE14C42E38FF74191CB
-:102CE00047E225DA7CCB59BD7EA31DF1F8DA0E76DA
-:102CF0005FE1B5E2AA967C283F2EA1BF767AF278F2
-:102D000062A3EB3D6826BBD9FD2F8FEA2AEACB6789
-:102D1000918A5FC67305C827D4EE4B219F50BB2E06
-:102D2000C827D496219F50DB1EF209B5F5904FA815
-:102D3000AD877C426D19F209B5ED219F505B867C11
-:102D4000426D7BC827D496219F50DB1EF209B5F552
-:102D5000904FA8AD877C426D19F209B5ED219F50C7
-:102D60005B0FF984DA7AC827D496219F50DB1EF2D4
-:102D700008B5F59047A8AD87BC416D19F205B5EDD2
-:102D80002F0E3DAF2B97905775EDA7DADED095A7A4
-:102D9000BBDED5B5FF61EA315DFD25EA27BA7A4190
-:102DA000FF4B734FE99EC39985BF08F631ECAFCC5A
-:102DB000FD775D3F0A29C738B3853420B441FC96BE
-:102DC000C268D286D04EC51CE0F491DE11E9C0AFD6
-:102DD0005BFD9B81B90E4E3A9305FAFFB5C9735955
-:102DE000FC819F13CC867FAA948963BEC9807DAD88
-:102DF00038F7748664121C4FF930242174856248B8
-:102E00003081F261280A617C28019F2784E2102624
-:102E100086D2F17952280D61722807614A281B6118
-:102E20006A680CC2B4D068844342E3F1BDF4503EFA
-:102E3000C28CD085F83C3334096156682A3E1F1A8B
-:102E40002A41A8862E45981DBA04E1B0D05C6C9743
-:102E5000139A837078683E3E1F11BA1AE1C8501564
-:102E6000C251A14A84B9A19508478796233C2F7483
-:102E70002DBE3726B41A615EE8467C3E36B416E1B4
-:102E8000B85013C2F3438D08DDA1DBB05D7EE816B8
-:102E90008405A1BBF1F9F8D05D0827841EC2E7853F
-:102EA000A1071016857E817062681BC2E2D06F1088
-:102EB0004E0A3D86F082D0D3F8DE85A19D08278793
-:102EC000FE80CF2F0AFD0EE10F427BF1F9C5A10E66
-:102ED000849ED0ABF8BC24B41FE194D01BF87C6A6C
-:102EE000E87584D342EFE2F3E9A1B711CE081D43A0
-:102EF000F8C3D05184A5A14F105E12FA1BC21F85E2
-:102F00004EE17B9786BE403833F4777C5E16FA0A32
-:102F100061EF7E7F72A47B895ED37710D7B2C70F33
-:102F2000EA3B5F846CD19D4BDD1FE3443D397B1D43
-:102F3000CB23D95C726A1AFAB5ABAD2AFFBEA641A3
-:102F4000AF7E6307FF6113D4A4B13E200F7001E789
-:102F5000DFD78AF72681BFB4B9A0AB16E221B767E5
-:102F6000775500BC339DC5573773787B3A3BCFAC60
-:102F700018E9C272C5EA11787E451207B78ED78666
-:102F8000B0F744FBBA4C5EB6F764E1BD8041F6335E
-:102F9000D87667CB8FBA2EDDBB1DE5BCDFFDBC410B
-:102FA000BFFFEBF4C27FE9FDA7067AFF08A7972BC6
-:102FB000A3FC199CA7E21907F55336A4C989B49F4D
-:102FC000CA16C90576B26A63FE0CA05F01F1603CC7
-:102FD000714184BCAE7739FD16379809C41517AB1B
-:102FE00004E3B98B77B13C5F88839651BEA8E17C3E
-:102FF000B1EA969D1670416B1A96B1FCA3008B3313
-:10300000D9E87FC0CF2B5AE660FED1CA47F5F1A7B9
-:103010005A88EBC8708EAC7F5ECFE34CC678A53182
-:10302000BEF4663A8FFBBA59DE11913370BDA7E941
-:103030007A219FC37BBDC306FA9FE201CF49C4FA40
-:1030400045BC52E081F4BFCF8079A127F78DC03C09
-:10305000B593AA9A02EDBC549C3AED90FFE09D080E
-:10306000CF29FE309FA4A73106F3918E527DAE4248
-:10307000E293CB3B11BE9FD6F54E26E1DF6FD49F86
-:103080001BD85A30FFBAD24C07A6ED2A1F49C0FB05
-:103090008FB4BF71BB211EF98819F381FC644D2ADE
-:1030A00029EE7FAE50BEC98CFCB178771CCB0FF3F4
-:1030B0007BDE847C7D418FA31B7366405ED1E2E69C
-:1030C000EC7C0CBBED36A39F27CE4B059DFAE74564
-:1030D00097C7C2F7115734BF8EF4A4F4D2D5D7B630
-:1030E0007C81F70728BD8E47A0D7F181E8159DC1E7
-:1030F000E3816E912796177B1554AE4B4039ADD8BE
-:10310000101CD1A0E147639C9E64D8F1BEA3C827E0
-:103110002E1DC2E841147732D0F5544B21D2CB4852
-:10312000A7D27F54213DC83B0EFCDEEE821CB2E8E4
-:1031300032FA7C118F5B2E68BA04FDE79C0CE6D74F
-:10314000BFB61E722D09797DBD8D78A8F3FCC67AB5
-:103150001796FFB23E15CB7F5DAF227C7B7D2EC2E2
-:10316000E31696CF23E4893200E6D58DCE60723423
-:103170003A43ECABAE4B85B874E93FDE2884FC9E45
-:10318000247FD2ACE999E877EBF234E65DAECFC3A9
-:10319000E832F33CAF5B24377C476571F985BAF6BA
-:1031A00024777C5F19EC07CF1B59DC1C87DF6FBBD2
-:1031B0007A6682AEFD95CDE9BA7249868AFA754E75
-:1031C000698EEEF935156374E54AFEBB09C4166DC8
-:1031D000D29E4F51CAB23C6F176BFB65C3C4941BA0
-:1031E000E8F85F1E3063BD911EC72D7EDC8FFBB7F4
-:1031F0005BDD60874EC03D325A3EF11719F5DD099F
-:1032000033F1BBA8EA3E21918D0089C2E4E9F421A3
-:10321000264FA5FF9009ECC3C9AFAD787E57B545E1
-:10322000227EB843D543314FC7BDEE312BAE7BC9AB
-:10323000169978F1BE92DA06E7D6D73D32CA0DE785
-:10324000960B728299706FAFE7B751EEEDB4B6AAE4
-:103250008BBD7F82EEAFE3202F492AC0F383CFCA14
-:103260005AAB4D906F201F480239FDEC2919E32914
-:10327000CB57FFA5C8057AEDA5B6B78AE938C75B75
-:10328000651CF79347ADDB6494774F0A7CD7B56F25
-:10329000DD018C33BC945ABE2283F2C1C7D5817143
-:1032A000A877D6B1F8767FFCD0F502BD815F357A7C
-:1032B000ACCF6EB17332AA7CD2403F5499DD786EA8
-:1032C0007ABCC58CE77954FFE3F9FFF1D60413D338
-:1032D0003F4F21DF2D56548B76DCC52DB287FD2E56
-:1032E000846A81F992BB642F99086596AFE06F9666
-:1032F000BCECBC464FDF6B574FC4FBC5C6FC290175
-:103300003FA732E5D59C03AD788E9DCF92095D8AAB
-:10331000367F5CC457482AEB5F7CC7A776D8FD7719
-:103320004CA6F0A4877D72F0F40E07EAC74F4DCF8C
-:1033300017DD40E12765FE0F154A9706D97B5F062A
-:10334000E4EF985AB64A782E72EC0E388FFFF809DF
-:10335000B31BC590E76BADF8F5F2A103E507C10C0F
-:10336000D8F97230594A85AFF212CCDF984FDA782B
-:103370007C20C0CEFF6112143FAE5A768E75ACD061
-:10338000712BDCC3AD32DCDB3DC6EF2D3C96C1FCBE
-:1033900021619F3FE2E52A13934FB2877D7F11F2AF
-:1033A0005E866BECA9D0A7BB3386A1DEE8B5ABA4E3
-:1033B0000DF54A35FF3E70EDA356764F47252E900A
-:1033C000C7E584CB1FC8337D6F85E589FB809D975A
-:1033D000914EB4731F9B03D59DD9F0FEB68DF1F8C5
-:1033E000BED91D00F9E576C0461507E88F6584CD86
-:1033F0006F55AB14086AE214E2F73808D8058DBEA1
-:10340000E96F0FF4766029B7774B8921DFA7556FF5
-:1034100097CA631CB8AE15AD3CEFB9775E32F98E32
-:10342000E2ACDA1B786916CE5B7207C2CC6319E98D
-:1034300009C27780573DCEEE0319E7655CC760E7A8
-:1034400059ED9E330DBE27DC3BAE61DE02DF042E5C
-:103450002869E820F05EED67F8AC6E97905EFFC5D6
-:10346000FD2A71CF4ED07D19299F057A6DD93D7403
-:103470005F98DDC707BDF67A6700FDA54F48ABD35F
-:103480004EF9BF76CBCE2B27C17B0FBF6E01FEAEB0
-:10349000880F8E30C5C14FD2DC7847E94561ECBB5F
-:1034A000C19E7F5FF8213CCE84EF517C2CDD2163EF
-:1034B0005E83A61D3FDFF7337EF613CC23AA795334
-:1034C0007637D1A735F0733E05E73E5F819FFFED6C
-:1034D000791BFD989CCC81FD18A37EE9E7C718EC09
-:1034E00027DC9B007BD993C4F2C0BF543CB1F1A848
-:1034F000970D7A37A900BF3B2AF46E35B77B629CE3
-:10350000A560EF68F9C32D4F3B21FEF05FF73C9DAE
-:103510008C7914605FF2FAECCBF5556CBCEB9F8DA7
-:10352000C2BCA5CFCA3AC781DF57F1F3979DDAEF46
-:103530009AAE48F59664827EE6F67095BC2DCB0572
-:10354000F6D0173EAFA2DFFE2BD23A1D6759A74334
-:10355000BFCEC5B04ECD7D902ABECE0F9AD9FA8E81
-:10356000B5B0F52EE9B74E3F9E835CFF0BABDB8F0A
-:103570007E4610EDF8899D3281FB67BD7E86C1EEE7
-:103580009F26AD5B011FABD6FCF57D85F2C5F291A0
-:10359000143F940F2AEEB2A29D5FFE5B76FEF9B156
-:1035A00054928207F02F049D6BE9F315D43F00FF7E
-:1035B000A26F1EBD767F39E0B1D7EE0F127F753C4A
-:1035C0000E55D7FE32FE5E94E461F99075E23B3011
-:1035D000BB0DDF81514107B07BF236A0530651D9B4
-:1035E0003E511F4FFDEF115F2C5C83FCDF3352FB1C
-:1035F000BDDEFAE8A019F27D7B764AE817ADBAAED7
-:10360000C4594220BF95C5C1366732FB25793C9825
-:10361000F762A5748DA6E3DD92A9B2E7AA8BE575E2
-:103620003F4CF0BB3362BEC6E7101FB781FDB39BB2
-:10363000D0FE19D7BF3B93F9CBAB6413FAD3B516C1
-:10364000E65777F3EF3EDCC7EBEFCB64FEF5C399AB
-:103650002C9EDF0D7E249C4F5F64C5DFEB21641A36
-:10366000C6C915C2F84F117873299FF7CA37FACB2C
-:103670003D1980A785A4D30CF49C553C47857B035A
-:10368000EF27DBF03B4AF4AF1CFA99CFFB396866B1
-:10369000F704DE8731E8BAE6F378F2FBF019503A26
-:1036A000FEFB6916F463FDCF59D14FB8399AC5FBBB
-:1036B0004862AC027C7E0DD7530B265B3D703E30DA
-:1036C0007FF2CDE500697F7E42F15561EBD9944FE1
-:1036D000C76934313BDF184FF0BE24D9D85508F8FC
-:1036E0003B9FBAC590274F57BFEBBB8481F8487FFB
-:1036F0004FA116E20A1710C660C5885F5DB9D6C231
-:10370000EA0F661E99754F06217F866C26B03380BE
-:1037100023E08BCA58DCE7CE863CFE78800AF2DBD9
-:10372000650AF19B186CB6E37788585EBF3807B915
-:10373000A2980463E9FA82FBF5F728AE0A9A82A3FD
-:10374000E07C47097600FE4C36D5ECA2E394974A1C
-:103750000580F7DA0D839BEFD1CC8F67DD33999627
-:10376000E17B5730CFB512E6F3CCA7420F7CBA50BD
-:10377000212FC8058C7EC087F5F1AA1FDBAD667CC2
-:103780002EEE6F08BAE4D3EEB5F89DCFE747FB699C
-:1037900076C2FB96F07193CF32C53E8FF9692BB993
-:1037A000DCAE147CF7B85E5E63B354F63D35F007CB
-:1037B00029DEE6731889EFED59AC7F7B16E3FB1029
-:1037C00097C7C18EB7CA4A82B8EEE7AC484731EE18
-:1037D0006C0EA3B358FEB29887E0DF6AD280F93747
-:1037E000D53C1E63A29A04F3745B7F81F9FDC63C4D
-:1037F00021EA2061DED98A1DC6E79A788EACD34BC8
-:1038000018E7942C3D4B607ED20FA2DCC0EFF32D65
-:103810006D180F30B633B74A28E7E666EA4F49FC21
-:103820007C8B96AD2D12FEBEC3FC8C9EB1F8BD7292
-:10383000EE575773BA52ED3D03EE0155833F85E7CE
-:103840005FFC3B515B981FA970FF77718BDECF98AF
-:10385000BF51E36732A0BB576F35E4879BB9BF7197
-:10386000C4D23316F4BDF19EFD11139BBF3F996086
-:103870007EA4B867AF707F52F0537A9659773E2690
-:10388000EE7356809E62DF3B30E453D9F1BB2B15BB
-:1038900012FF5E258F2B9EA4FE267E57E67014DA5B
-:1038A0002D1167EC2E71F84DB1F0394B565E107B3F
-:1038B000FD2CF0332B9C1605E01953178E7383DC17
-:1038C000E9C8CEEE8BE36E2E19BF05F286E66CCD0D
-:1038D0009D6DCBC4530E7E1F69EC6B90CF7BF93787
-:1038E00074FE581E37DB43F747DD2FF62CB4511515
-:1038F000BD2CEBFCD90AB5E7DDF7F66C85F2DAAC46
-:103900006256BEBD270BBE21BC76EB64566E14FD1D
-:103910004D9E0D79F0DD0FB0F295B4DE0F7E2EBF17
-:1039200007547181847A762DB73F227E54617A9E46
-:10393000C129EC773ECED66E4356F9DACC24F8DEB8
-:10394000E771FC3D8116D5B316ECF5FA0C6F6516E0
-:10395000ECA3E6487E0BDC8B7F333092DBAFB0BF4D
-:103960007BB13693E5096F1C5A8EEF0B7CD17E56E6
-:1039700064159E7B3FF1FDFBB9F69F99CF91A16C39
-:103980007D9A7ED6FD33FD4C51F5F311FE99F8CEAC
-:10399000DCBE6CCF16E877E54D6C3F4C8EDB75F7DF
-:1039A000FF4F353C3B12ECFEA9C7AD09C0872B9FEA
-:1039B000FC5D5635F87FDC1FFAA4E36D0BE47DD780
-:1039C00085D87771EA43EC3B3975BB3A2C33F2204A
-:1039D0008FB5C3325533BFDABEDFB9522ED3F831BB
-:1039E0003FCF12F9DAEC771D573EF937FC9EE04ADB
-:1039F00053DB8790E74B2E607134E33A37F1F7DE03
-:103A00008773FF30F1825F70FDFB558E673BAC73AF
-:103A10006316C1F67284EF767DCAFBAB88667ABC0A
-:103A2000AAC8615329BE0BDFF43641DE69F5C3D95C
-:103A300005329DC7F68C298F037F448E6FF6B0F850
-:103A4000663B8B6F56C4775E478D14F9686BC59DD6
-:103A500036BACFBBF47ED27BDF0FE286A556213F7C
-:103A6000D7CE9E96C1E265507E256BD59D203FFB4B
-:103A7000F8EFB32D9838361AE4BC2B3BC6E4A2F21B
-:103A8000FF747AE547308F05132F9A01CF4BAC8E28
-:103A900091952C3E8EFCF1747AF9F3500FED21EEE6
-:103AA000E1B50493AEA2EBF0BE2263DEB4775C8C8A
-:103AB00037DC3D9520B7571F65313F6D9F89CEB3E9
-:103AC000A06F1E627CEA985DD70971AB0D69F9E0C1
-:103AD00047BB324A3ECC4AEA1BDF95E17D03CA620E
-:103AE0007CBADC71F07CB0F3E8E4F4F810E846FB53
-:103AF000299F2CC397127AF5FA65D36274E5CB67D8
-:103B000026108F366E7A79BAAE3CAF2247D7FE9A2E
-:103B1000256374F565D6CE090DE7E0EFD73B1EC5EA
-:103B2000FCDEC3EDA7DF9A0F7EEC0ED92DD1F52C6C
-:103B30007FEE91B720FFFA24FC0449018B8BB1EF93
-:103B400035F2F318C5A3E8CE63F63F6D01BF5D13F0
-:103B5000E737DCCB3B80717CE3798CC817FF67CFFC
-:103B6000632C43F9BEB8F7F73C3F7D89AE8C4CDD42
-:103B7000DD81F469DACFF2989BA8DF02DF13FBE165
-:103B80002E6B00BEE1FED9EF8E5A54CDB94C7DA804
-:103B9000117F5777EAEEA3786EF3AB2CA6B7EBDA7A
-:103BA000BFB0C03DA91FB6AF46799E41F5572CE581
-:103BB0009BCE0E327617C493B31D9887B3B2F91219
-:103BC0008C53C786E623AC6DBD04FB5B159A8BE571
-:103BD0003AFE7BBEFBA23B67801DDEF74C1CEE0766
-:103BE0005F9383231F827EAC0ED40F65E90B368072
-:103BF0009FB02FDA9F772D1DAFEC3F7F8879E87556
-:103C0000BB248C9B96C9649F04F9F7A128ECAF4CA8
-:103C1000FEF384D5F4F9A553995D2D031F87D6CB08
-:103C2000458E5BF17BD2117E27AD6028D32BE62E2B
-:103C300036EFE9A139D89FA82F1E3A4CF7DD18734B
-:103C4000D20E65B1BD6F3DE62E09E18F426310D6FD
-:103C5000EF9AA340FEF92BB9BF48043CD1F6F87D9A
-:103C6000B0FEFA78622C09A3B704B4723D3C1FF48D
-:103C7000309CD3677B660D4D82DF23EC526CA047EE
-:103C8000ED3617F82FB38AF3D56ACDBAE4E7AFC69D
-:103C90007B10D6C41E33F803F329D4EAED4511ECAA
-:103CA000CCE5434DDC7F6EC4F50A7B448EFF18CF14
-:103CB000B517F2F88090A792A1261D5E3A25261727
-:103CC000FEDFB27381D26C6F35CCB7B384CC7B0A84
-:103CD000F5686716DC47FFBEE64FE96B03FA3B95D4
-:103CE0002E02718C95BDF367F27CB6F95FCDE7FFCC
-:103CF0009A4C7CC017AF5D7C71A787CEABE3C6F151
-:103D0000E3C12E88F1D60D65F987C4D5F30DE61B06
-:103D1000EE895121AE5F06671E13FAFC79C847840D
-:103D2000F861FD1EEB76F8406ABD93EEEFED90175B
-:103D3000181504BEEDF8639402F663EC70EFBAA1B7
-:103D4000982F386A1A7CC7C7D36E5508FA419E9FD0
-:103D5000C2F348F33D9BFE12F268E4336F33933FA6
-:103D60002F97C34ACEB78BB91C562AEE58388F59B5
-:103D70007440C67B918BD7496377417C4075E03DA9
-:103D80007D218742DECCC097E3813F195FD686E272
-:103D9000B87C67F37E991C94C92CDFAE6C4C1CEE8A
-:103DA0009FEB4209D84EC8AB90D3CDD9DEC761DDB9
-:103DB000654D54BEE938DE0D6913405EFAF8C4E281
-:103DC000027EA27C925AADE183A68EAF14E013F37B
-:103DD0006409F9C44AE1540D1F95F7FA27AE19C9D1
-:103DE000741EB33666E3F79445FDCEA1C24F191C8D
-:103DF000BF6FE5FCB5D81E1C017EADB921CA0DDF31
-:103E0000913F99A8A21E5B738B843F4EB8C65C3E5F
-:103E100015FC8B350F4818DF03BF03F44FD1A10603
-:103E20008BF61CE4EAD0383CAF9E1B1A8E707B8662
-:103E3000F78F8087CAD0951C8FE3C29EF77DD9701B
-:103E400033C6D5BE0C58DDEC3B63FAF85DA1C78DD7
-:103E5000E77FE60366B24D85B89B57C6F3BD4CE2DB
-:103E6000BA5B62F13B88E789F89B38A71371382B5E
-:103E70007C0F5763474F2BAD59B00FE9178F2B615C
-:103E800076FFD31D66766FABE3CF45265AFF71B63A
-:103E900007E3722FA57ADF86F5ACB82CF0A49996CB
-:103EA00057DEFEB413E2E5029F6D4A7004EC97DA28
-:103EB000281E213ED8D622970698BF133347935F1A
-:103EC0001189AF578472103FC2DE08FDFDECFA5431
-:103ED000DC940A3D7E363B24F87B159783552007FA
-:103EE000446B6FE694C3EF9A915C09EFB9F6D91B66
-:103EF000260F424F537E47B929CBC9C4B8BAD0DB8D
-:103F0000467BB4576EBBFB02B0BBAA3746A5EB9B02
-:103F1000F29BBF3FFD0EADAA7DEAB16940A7923189
-:103F20001281734CA39EFC1F2B97089D00800000FC
-:103F3000000000001F8B080000000000000BB55BB4
-:103F40000B7854D5B55E67CE9C9949322F9210C23A
-:103F500023F1CCE441A8018747243CFC3C10082015
-:103F60000627F8155153994404C4BC40B9A642BF72
-:103F700039210902A53654ABD4A29D50B0D4AA8DE4
-:103F80008035AD3C06411A8AD569B5B7F416E828E4
-:103F90005CDE60C05AF116E5AEB5F7399939930485
-:103FA000B5FD3A7E7E9B75F6DA7BAFBDD6BFD65E99
-:103FB0006B9F9359C523E5058500D7E8772B80F8DB
-:103FC000E667923C1CC0BAA21C143BC0BDD896D870
-:103FD00063FD1280D28E3440D43CDB117BEE964DD3
-:103FE00000FDE979234011C02C9DEFC432800C8084
-:103FF000FBDCC07F0DC83410E08B1B38FF742BCC6A
-:10400000F3E3FA608E64C7CF37DD33D92B63FF50FB
-:1040100059E0F3AD889A6DE9C867B7B9B77890FEF3
-:1040200017E52E13C126A40238CD51482DA4F94D11
-:104030006C7E0095C9F36572F7D7F6F9AE080DED01
-:1040400038FEDD5B6F8D2828D7DEE5A3478B726CC9
-:10405000BDF1B285F195A5E1D831005DBBACA14DB4
-:104060002837E07C02F27FB46B58682D6EED18742F
-:104070005D05A4D59D2932EDAB6E770AE3AF4B7693
-:104080008504ECAF7376E5FB519E923D4961188142
-:10409000EBEC493203AEFB59CEFDE3E5227A3E74E8
-:1040A0008AE044A1775ACD807C2BB39509A4B7BE92
-:1040B000E4D7E54B6CF5FD97960BAACB0530B3C45E
-:1040C000A19AB05D7C25076034C043AB67B0F6F5BC
-:1040D00060262A1960EA957200DC5BCD953BD9F326
-:1040E000DA2B298C9EF9DD4829ED075E17600BCA93
-:1040F0005F36F85B2B01E5EB4C86E13B705F9DDEA4
-:104100002C5F137657B7CE60FC65BF9C369DF65585
-:10411000BB0399695C8110CA233D9DB09B48FE8713
-:104120006D5CFC8FEBFF3C46C6F11F8F718C046405
-:10413000DD27B63F395E60F6EC247B4EFEC53FB707
-:10414000FF0FF249574450501EEB1581B57F940381
-:10415000D5A427E40340BEEA6D03C704EC5F054F16
-:10416000BF9664C4A3547D49223C59B12D89EB9F6D
-:10417000A7E124518F4BBAF1F4D5FC609EC6FF65D0
-:10418000786AFECFE3A9B90F3CB5FC3B78BA8E1D27
-:104190007DE089E16CE6218E0FC871F8B600C30B93
-:1041A00093BBD392156A42BE7BC9AE84AF6B504FAE
-:1041B000FA9C47F64D8BE1F5979EC0CF494EDDCE78
-:1041C0009DC96AE192C2AF62E7BB81E2C6BDE9F573
-:1041D000A0E0F379D8C6C70D2BD9AFB0E7FE5EF9E2
-:1041E0009AF16EE357B4F31EB233E1C78D761CC368
-:1041F000EC27935D13ED4E7625BBD7EDB66EBA9ED8
-:104200005D87E7067E477A49B42BB8934D7073BC3F
-:104210005DAC77126E3E0E9B81FCAB2FBB4A1BB888
-:10422000DE75BA256C9E1E62E701A4950F6778398A
-:10423000F4EFE0A5ACA4FDEFB67E0067E4257E3385
-:10424000F2CF29C6AE41D4BFB45531537CC17F8E65
-:1042500067332A6063FAD4E8872353508E994F76E8
-:10426000F7ABD43F75A24B1B0F0A6EAB9BFFB45C40
-:104270001F59C7E46EE5FA0E44CDFEE171F418A4AF
-:104280001D71747102BD91F3D339E266F384D87362
-:10429000C29F308A687D3ECD0FA0ABB41FDA6FD6C7
-:1042A0000EC1BD16ED7DCFC48F2C649FB292E88104
-:1042B000C1B8DFABF2637E7B123EA73888F2DA3DED
-:1042C0002B5B55B3361EF558ADA9D1DA2E2822DA6C
-:1042D000A9BA5808793D3DF568F7E8B8D4D7C5A321
-:1042E000D5381E2C63BEDE78C2091BEF65E3C3D64A
-:1042F000AFB1FE5D134109F512270779B43879157E
-:10430000697D7ED4DD9DB8BF502FFEE6D5E68D9841
-:104310004C3580FAFA86E7E9565B16DA17383E0A1A
-:104320003D3FF4AB1C87A024ECF77AF2BA3DC6F30C
-:104330009F7EB2717CF87AFACAE8315EC3C7222345
-:104340005E5C66FFFE8F510E57BAE056D1FEB5FE99
-:10435000A475E022FBEBF80EF99521B8BF24E8C65E
-:10436000AB11DF6DFE29A8975AD0FB7FDA4AF1CA5C
-:104370006FEAE6E778DF29748F2F40FCB8808F2F33
-:10438000F56C6A550B993D583FA3CDD7C17B7B0295
-:104390003D31C13F347C33FFA4B88DFAC9EB256EA3
-:1043A000DCAFD9ED82007329EE4526F37C2FE2E5E0
-:1043B0006D9387E7770F697A7C586B23C9717A18F8
-:1043C00012B333FEC25060D837D3D3DDE9DABED59D
-:1043D000BDFEDB715F9154182E204EBED3B6ABB537
-:1043E000F996D8F860DB5E8693EEF9D43D113ADF9A
-:1043F000EFD6F4D4D4168E683812C8EF6A1820109D
-:10440000073B0455C47DD6100E7AD967594FBF516A
-:1044100013C62BD275C6DFD973BC92301EA4F4AF7D
-:10442000335EB3D3ED09769C9E60C7290974854E2F
-:10443000870CF14C8F73551DEB5B32508E87B60A9B
-:10444000744C50BCB608230136780EF9EDE308AF82
-:10445000B2341863FE46CFEF23B66100E514CF18DF
-:104460007EDF695572514EF27746BFEB576E22FCE4
-:10447000D4B76422FF264FA4D586ACF734AF972873
-:10448000A779C1F3C75633CE7BF7985F1EA0F9CC4E
-:10449000C2FB91DB3DD7C16B6BC23E3626D06A02B0
-:1044A000FF535F12DF9B13C6AF48E85F97406F482A
-:1044B000A0571BC757CE17989F54A2FD48715FE6BF
-:1044C000373B3DDDF942F77926D8599E64C0FDCCD3
-:1044D000264E1FF07CE85F6D8FA3DB8EFBC9DF7576
-:1044E0001C4BC07FF7A6834AE787D4473CDBD11734
-:1044F0008E0A12CF3BDEFF37FAE740CA3BC1702E6F
-:10450000EF138DF45E51F7B74B91470AE9A14E774F
-:10451000F90348CF7CC6B82FAC0BB5FE8BFE29E85B
-:10452000FF33BFAFF75FF453DCD3F7A9F3977E7E79
-:104530004DA4F58EB45DF06FC6FE8AC9E1BC7A94D5
-:10454000B32295B778CE88748ED5D9B83F95EE1240
-:10455000FD74CE542487F39616C6ED13DAF3699FE3
-:104560007B978BCC3E6A13AF47AAC067012C85F6B8
-:10457000BA5C0D2F20FFBEE562039D6BC71AD232D5
-:10458000A89E18EEE579DB3ED70D190F20BD3765E3
-:104590009E4546BEBD8F4F65ED9BA2B2AA0B71FC36
-:1045A0007F9ECFFDF661D4EF62FAF947DB157F23DA
-:1045B000FAC5671E99E93390EACEE8A07C75AD0490
-:1045C0005B6492C7F73CC3CDF7AC23D7A21C958D93
-:1045D000376650FE56F5C3F2D281C857D522F9048A
-:1045E000C6072348EEC0DAA916EA9FDFACB5EA3465
-:1045F000D6EEF962FBA111C8DFB546F46D42E6DDE7
-:1046000057BCCE2A94EB78128FC31F9ECF75929C15
-:10461000EBBD01C98B72543A1DC9021D1E6ED939FA
-:104620001BE77D2247B1788B62FC7BBE10E751BE51
-:10463000F9C6F9AA0CB29FDBCBF1BAFB4A55465535
-:10464000DC79BFE08299E9798F457E84F2CB3DC960
-:1046500059822A303DA795A3BFCCD7F26BC44BC378
-:10466000F65ECEFDCF3D22D3CB096B031C4710EF86
-:10467000FD6EFF8924A73EAEE8FD409383F03C44E5
-:104680001E159F47F7CB9E3C84F611C359DA1F08CD
-:10469000372C8F467AA8D7BD5E455CC13ECCFF491A
-:1046A0008E74A594CE0158810C18C720B33D3FFEEF
-:1046B0003E2296A7AED4E201E73BAA3A58DD7AF44F
-:1046C000A5A410D53347D5BF3AC01ECFCFFD64A1F6
-:1046D000D3A1D2617CCAE130935E8F998327BF8DCD
-:1046E000E3163C27B138BAE0B9FE2BBA281EA03D2C
-:1046F000F3A0E7BAAA5762F3F4E927E02937F8896B
-:104700002A972BF6BEFD6492572EBF9E9F2CD4F2A3
-:10471000F6D2E7243FE17C6191C30C18AF273FF745
-:10472000D616C2E3C22549A3AC28F8C2E7ACCCBE7A
-:1047300051874375637FC0E930F7A3B8EEE5712474
-:10474000DA98C4EA1431C3C2E29EB8AA4826FD949E
-:104750008860B6E1B9223A7DB29FD3CD6EACDB5A08
-:104760001CC532D9F73B5EEE0FDDFDAEB9B7095877
-:10477000D75CC67DA4E1B8330D4F3E3D16E53B0B3B
-:10478000A1396351EF97C9D0B8CEE51D6248A57332
-:10479000C2AC98CB30EE2D02EEEF3507B75B26E1C9
-:1047A0003F17D52FBC9DEAA30743D28751ADF6B979
-:1047B00086FF7F026F5B28BF7D68ABF1397A8C85FD
-:1047C000FCAAA6DDF8BC0ED65D1247506BFE305A2F
-:1047D000A03DC7751B8EFC65F8FE38BE5AAF23FDA1
-:1047E0002496E0300A46A166719D42D75D04BB065F
-:1047F00091C92BAE4C0A911EC56C7E3E4C03219490
-:10480000448070E3BE71DD4F838787EF4740888F18
-:104810008D667A3911443C0D457D386D8C5F7C4C3A
-:104820000C5971DD923450FA913E9F2E0770307D05
-:10483000AA6EA4A7A5D79B293E9DD3E24BA500FE57
-:1048400076E6F7BE6CAA8F173C97C4ECB7F0F90771
-:10485000FFFB4763C85E65E9F17EB446C31DCE0722
-:10486000B6D4D83CA71ABF934DF294FC04EB4AAAE5
-:1048700037C5C0D377B37899E26371CB1DFDDE589D
-:10488000C24963CAC8B540381998ED2D8C8D5FB800
-:1048900072793E1F8FF5AA93E25512DB4FF50E2B6E
-:1048A000C349E51A5161E76396859D8F1F3627310D
-:1048B000BA7A4831F3B34A1304681F980B66B2B84A
-:1048C000CE550ED57650B6DB29CEAF8B884E661FFF
-:1048D00055B39B85ECB3D99BC6FC771EE918CFADC9
-:1048E000FD84B322361FBF7FDA2D84B6B0F8542F73
-:1048F00093FF57980416E712FDF1352FCF5B2BB3CA
-:104900007DF7D1B89A27ACBE951E2E83A8CB8378AD
-:10491000AA314516FC98E6FD9595DD6BD4E13E92F3
-:104920009CACBE50B6A1FC7566305BE85E4AE6F111
-:104930004C97A74E2E9F4638C5FEC366ECAF71F06C
-:10494000785CD38FDFF780C316DA12BF1EC99CC311
-:10495000C7C94EF2B3710C2FE4F726ECFF08787F3D
-:1049600089B3588EE2F34E13ACA67B129267D888B7
-:10497000B875911E3882F0B8C4EC75901DD2E6CCA3
-:10498000A5F55E16595C42677AA298F2BF97C5D129
-:1049900054C756AED957BA81E85747BA4984CA575F
-:1049A000DE63E7D3431ACEA294F7D37985F4ABD86C
-:1049B0001ED5E24240E4F73847498FFD637AD5FBC4
-:1049C0006BD648CC1E352D1C0F358D7F66F3D6383F
-:1049D0002219648F9AD7A49B09D72735B9AB1AB38C
-:1049E000261E467C54492EB7808FAAD5320BD1D5CE
-:1049F000AD02A3F5F56AD6FC29C354C8E7A3D6AA2D
-:104A0000E128366FFF6C3ACFCEBD94965D1967F7FB
-:104A100073CDAF3B653BF94D38CF4DF7304B927CB2
-:104A20009B989F727B9C6BCEDB44F734F3DD118740
-:104A300080FDF31FC949A573EE983B6CA1FE63EDA1
-:104A40001E13D18ADB3D9168C57C13A3CF61086F2B
-:104A50002FD4C08B76AA15386EAA5FDA67F1E27A96
-:104A600029395C3F175E7E2F9FEE0B6AB223F974E3
-:104A7000FE22AEF207935D5E14589E50FB92A8246E
-:104A80008D88E1AA967085FEBF58C355ED8ED71F5D
-:104A9000253FAD253C8DEA894BAC2BF7B3E7DBDA3C
-:104AA0004A818FDF4FB8D3CF7BA49B25BA57B36819
-:104AB00034AE43B43D87EB1FFBA7F07EB5909D233A
-:104AC00010B5503E5C27F23C01FD2993F288BA0EE6
-:104AD00049ED8E97B42EF517C6FAFBC2CDF01C93A4
-:104AE00066672B3B8F86E770FF8BAE79CD49B8B8F0
-:104AF000F0F2BE03E3A9BEDA26B829DEF7F0434D93
-:104B00006F75A42727DB27CB8BEA482FCE989EBA58
-:104B1000FD4DC3451D703DE87AA9336B7AD2FBB5D4
-:104B2000F123343D5483A6D71D43B9BF6BFEAD9F1F
-:104B300023FAFE02A97CBC8EAF79DAFE266A6D35B7
-:104B4000E2C657C8F0A5586ED6EA7EECBAF06A1BEA
-:104B5000BB37D2EDA9CBFDA8B63EC669A55F6ACC2E
-:104B6000CE51132CEAED9E7AB6862BC9CEE3CA0746
-:104B70008D83EF6B40FD2D7E49F431E551CD15B7A6
-:104B8000AED51475B0BCF431D14DFB2AF945F96DA1
-:104B9000B46F1D77D256C1DC3186EA8C7E4CFFBAE9
-:104BA0007C2503FCB7F5E3B80B933CBA9C1F086166
-:104BB000662FF555C1CDF3DCA885EE0F753F4D94FA
-:104BC000779E666FD1298C176E22797C32F937E097
-:104BD00039C8E4B11F5ECED6538F2EF78C88AD73E3
-:104BE0004C759889EF18F038A0E3F203ED3EE283AC
-:104BF00096D7591EACAFB34CD34BDC3A8186F49EAA
-:104C0000EBE8FC351ABFEE179DA91CFF25CD7F668A
-:104C10007C7A9CA51FDDC3E9FAD4F516E79706FD5B
-:104C2000E8FEA5FB936ED77FD5AF60457F96AF3E7C
-:104C3000AEED9BF94846EC5C207CD27967B5202E1E
-:104C4000ED867393E535D3865CB2047A79AEEB29B1
-:104C5000F179AC9E726793FEA7D9334D94074073E8
-:104C6000E6FEDCB8BCEC38DD77513CED0FFC7D0690
-:104C70008694F8F35CCFD7F4F31A7FEBBA7189E32B
-:104C8000EBD29533D4BF68CC927CCA232EE578D979
-:104C9000BA67A1DD3209E7AB3E1D2975CAB17AE5D5
-:104CA00096BF874517DD07EEF018EA85EAF3FB9912
-:104CB0007FD7406415D5B7956BDE2B1B4B76FF393C
-:104CC000E6E3C837BFD5C3CEBD339BEF1F4DA56C00
-:104CD000654B1EA31FDCF200A7D7F07CAEB2A5E89F
-:104CE00005BA8F3F9EA49412BEBBD60B6EAAB72600
-:104CF0006C295A710FF64F70DCD08FE43EBAF97808
-:104D0000D978AA1B1A44E62FCAE627E750BFD2215A
-:104D1000FA68ABF3C1BDE21EC2B7D9C5FCED987607
-:104D20004E34491C676F6B71627F0E3F2FF76B38F3
-:104D30002C696ACA37D1BA6D783EE1FE2B2C727BA2
-:104D400098EABE5D037C9B485F58A666228E4E0B98
-:104D50003CFF5E64011BE1EAA0145946F21F5CE6C9
-:104D600018D9480288576FAEE2753A8B2F5837B181
-:104D700075757DE9EB1FD2D6D5E7D1C775523E4593
-:104D8000E78726EF99E69FCFA13CE1CCD6BC5488BB
-:104D9000D3FB19DA17EAFB418C8BDB7AA9FF0EE70C
-:104DA000E8F7AB21D62ED2EE0D0F4AAD43E8FD2D2C
-:104DB000E6F127E2F3F2536D4936C223E6F1C6E786
-:104DC000123F4F308F373C47BF3961CCF7B5FA4EB1
-:104DD000AC70057A89437A9B98E79FCBB1A79FBCBB
-:104DE000117AE4F9BADF258ED7F3FAEE7B9623F633
-:104DF00084F731635D709DF5CF07D13058FBFD948A
-:104E00007C17C74F49F97C7B84EAC956ABDB8AFA29
-:104E10003D417E45EF015F13799E68035F18717114
-:104E2000E24FA37DE4870B8E70BF5BD02E84E81524
-:104E3000FBFEF58F8BC4FFC0460106087175D65383
-:104E4000EBE790DB5DF605560D44FECB5B059FCA94
-:104E50002454EC09F5D5818172DFF5D5BF5B57E9A4
-:104E6000F74C897A1F94ABD5573EF019F5CEEBF38A
-:104E70003D089FE2513DF57E3E186075D4C5E022A5
-:104E8000D68E6B6F2B198CF27F247CF0C404F21F3A
-:104E9000878BDD939C0FD6B39780173B465F9D852C
-:104EA000FA79C3EE7253DCB8186C60CFBBF1A2E1A3
-:104EB000F3961D7BC5C1C0F8774E40FEDD7617BD69
-:104EC000D6E8E57D1BB72F40327F3FAAD5DB0F2FF9
-:104ED000193B809EEBFB3DFB6D6E675DFEB35BEFA8
-:104EE00077527EBAF7C7693BC7917D535C6E82D11A
-:104EF000C20D220446633EBC81C7A1D336D70B74D2
-:104F00005F7A7AE39D19540F3E2075597C38AF6F54
-:104F100057B993EE41FED71C75BAA945FE30C96159
-:104F20000E8914FFC64F07F61E707CD80CB287BDE1
-:104F3000A267381977DE1C0A237D8EDE0FD2B97D79
-:104F40003599BFA7D7DEFB3DF06B7E9FD67D7FA254
-:104F5000DD234CD0F6FB5FB9A91CE7DAF39262FEC1
-:104F6000FCD4C6EDB368BE339B2537C97B71B3C48F
-:104F7000E65F8C75BC0971781AF146F16BF1FBA202
-:104F80008F207D662BAF9317236EE9BEB86689A488
-:104F9000585C3DF158A2F3ED14587DADE372B112A7
-:104FA0002A657AD7F069C3FFAEE191D10FDA579144
-:104FB0003E1271FAAFD6FD35B9BDD7FD8938D0F5AF
-:104FC000A5E321864F60B8D4ED9EDA3E72D26036FA
-:104FD00040657A54274301E5054D162830130E4CE1
-:104FE000C93EF2F3069B7304DD337D9AC4DB474D63
-:104FF000EEB7A85EFED4244B02B6D15C0F1BFFA80F
-:10500000E89B4AB4941E65F70362894931D179D788
-:105010006465F12231DEACC9E571382B8FC79B2D59
-:10502000B96E9E3F423DCB1FF416379845F949793A
-:105030004AEA2732B23CBD79C66C33EEAF7C42EA15
-:10504000B21CCC2C9FDF7CC76C7AAF5B3E3AF53547
-:105050002FD2A1DC59BCFFA6D42209E9C646FFEC39
-:1050600029D8BF2B57792AB728B68E3E2F3E7F8688
-:105070009EFF7640E0D9DCFE749ED95753BCFF48B2
-:10508000E8AA358931FE3F0870EC0D21464725C856
-:10509000A67C7A4B2EB07DF4D59EC9557E9ADBCB8B
-:1050A000F32A8016D26395FADBC394AFE1CF6F4346
-:1050B000BCDDA1E1ADCA660F132E60B574BE1B172F
-:1050C0005E8A4B2E33F9F72CCDDC7798C37B69FCD5
-:1050D0003068769FB4B15470E3B5B4BEE33C3A2671
-:1050E0009CD4E7C3FD7D24E17ED1AE8282B6469793
-:1050F0001250C91518DF849DBFFD8CE66D52219AB0
-:10510000C4EC50E1A6F3488080E91AB63529880737
-:10511000D4D3D2D72EEC27F83FA8E75399FCFB8CC9
-:10512000651A1EEF8828CFB4A150A782909E8BB637
-:10513000BE006F5E34E3BA674C8183A4976AD3DB09
-:10514000D94B65F2DB2627E52F175E117DB7E3B853
-:105150006A2D6F87AB62F8567CDEE919B6696D1C63
-:105160008EFE98CBF394F39E70F6728A1F1E5E77C4
-:10517000C2D57DD9CB917FBA7746119D4B4F81F235
-:105180007E6EDCFBC559E6DEBFBFF8FD209E77C012
-:10519000667EBE5ACDA03A52590B4ED4C70C94A588
-:1051A0001869096991BD8F0F313B129F93F214F971
-:1051B000FE4CFEBE06FCE48FBA1D75FBF4B01B8AE4
-:1051C0004CF9B9C90612F9CB30D8E826FFD6ED372D
-:1051D00055B4B378B3F4357E1FB7548836A711FDA4
-:1051E000329E97A42FCD2F7B9E9B5B2C648A451B00
-:1051F000EF67F1498F4B32FE47F8F94FDD4B0A79E3
-:105200000E9EAF8C849184AB2FCB77F4B884F6B12B
-:10521000E57D1DFB908A70BF0BB5B5A78A15B299C5
-:10522000F4D2DFE6A3B8BCF4B91C76DEC1BA1FB075
-:10523000FB0F9D0F36A6317CAEF288CC8E651D83A8
-:1052400041C6470F760820E339777B471AA39D575D
-:105250000632BAEC67032653FEDFFDDEF267431920
-:105260007DE685436302FC7EC54672F84197A3B094
-:105270009DF2A1CB769403EDE0B7AF66F7857EE8AB
-:10528000AE63846B02D18812F2274552B95D6C8DF2
-:10529000CCAFB57D2D75733B2E3DC8CFDDA593F802
-:1052A000FB3DB33ACC4578903A450821FDCD836269
-:1052B0005118599BB4B86CCD34811C678F243919AF
-:1052C000E4B8FA0D54254275D25C0D272905A9864C
-:1052D000FEC785804472CDB52F60B871F80619E617
-:1052E0008B649776327D04787EABE309C4F36692D3
-:1052F000F3938902A4212EBE3917FBE3E695265EBF
-:105300009A22B0D69817A35E4E5C0F4F33F3B4F3D6
-:105310006E180C63784AD00FFA07CB3F2FE3394E53
-:1053200069136617CF4C447A4EA7042199E59BCCAC
-:105330007F2E2B29ECFEBE45D3938E3BFF50702869
-:1053400038AFABD8A8B77E8A516F69D38D7AEAEFB0
-:1053500037EA65C05CAFA17F60E01B86FEC18B466B
-:1053600019E8ACFAF106FE1B1A261B688F7A9B819E
-:105370003F67F56C039DD77A8F817FE8862A43FFCC
-:10538000B0D06243FF8D5B971AE8E1ED8F19F86F9B
-:10539000EA5869E81F195E6BE81FDDF903035D1425
-:1053A00079D6C03FF6F02643FFB8E88B86FE09A702
-:1053B000B719E85BBA7E63E0BFF5CA9B067A121C98
-:1053C00032F097D8DE33D053DD7F35F04FCB3C6ED3
-:1053D000E89F219F33F4CF2CF8D84097F9FE69E07D
-:1053E000DF3828F02CC59FB9A6754755A0F82C7F4B
-:1053F0007F22E2F9AE74B32F4C4C5FB36EDBA4C7CF
-:10540000410DB79F80FD3E93F7CBE3E0E35A5E305A
-:1054100055BC1DE8BEF772BBC070DDD7F9ECC27C8D
-:10542000D71CB78F7E8A0D0BF0189D36DD6DA0FB63
-:10543000FB330DFC03E6CA86FE81810243FFE04593
-:105440003E039D555F6CE0BFA14131D01E75BA810E
-:105450003F67B5DF40E7B5CE35F00FDD1030F40F14
-:105460000B2D32F4DFB8B5DE400F6F6F30F0DFD4B4
-:10547000A11AFA4786571BFA4777B61AE8A2C80658
-:1054800003FFD8C32143FFB8E85643FF84D3ED069A
-:10549000FA96AE0E03FFAD57C2067A121C34F0978F
-:1054A000D8FE60A0A7BAFF62E09F96F981A17F862F
-:1054B0007CC6D05F7D0EE147F9F31B027BFF35B35D
-:1054C000E092A15F4AC73C9DEEA721D9270A3DF390
-:1054D000743D7F2BF37D6658E751533DFB2EEE5311
-:1054E00013CFEB6CF9FC7E0BF3779B8DC5593CA178
-:1054F00086B3AB9646CA4F5DAAC07047A94605BBA6
-:105500002F4C67E72A3B1A65FA0E0DF31B24524D08
-:105510001E0FD50F29B13C74C8B5D15F3D0FCDC862
-:10552000078EFFFC404A7E11D563AF96527DF22074
-:10553000A8AB480E3C5F5DF49EE99D24E3BD91DE7F
-:10554000CEB0A1FEE2D63B98D43A64D475FC768600
-:10555000ED3CE3EF9E57BB5712707F4BE3E67F02B3
-:10556000EB26339690AD41F42FF4D31F04DD8C7EEF
-:105570002A98C9E8A783326B37040B58FB6CD0C755
-:10558000FA37068B19FD7C50617428389DB59B82D3
-:105590007EF67C73702EA35F080658BB35B888B5BD
-:1055A0002F06EB59FF4BC10646BF125459DB1E5C58
-:1055B000CD9E6F0BB6327A477003A37F150CB1B640
-:1055C00023B895B5BF09B6B3FE9DC10E46EF0E8652
-:1055D000191D0E7632FACD6084D1FB8387197D20A8
-:1055E00018656D67F0346B7F17EC62FD6F07AF30A5
-:1055F000FABC76DF5F926F7CAFA6D30053181EF41F
-:10560000BC7616D52D048E62E9A2A16E49A81F12A0
-:10561000ED71565B479A8CC736E53983F23735C54D
-:10562000E5FB7768EB3D9E0C6A12C6BF462AE61181
-:105630008A8DA9106A62EF5779DEBD50C325A4F3A5
-:105640007C7B8126D742CD1F8A089F050C9F6F7FE8
-:105650009D3A49AF93834302F3F2B15D9C6552D901
-:105660003D813D944F79FFA621812AC2EDE5FA07DD
-:105670000EB0F5DCBE7C5AA4CC1AEE7F17DDFF1C01
-:1056800014D97D695FEBD5697FBFD067FFEE3343E7
-:10569000E81C9AFE85C8EED3DF911C73E97EE49185
-:1056A0007CFE1EE3917C93A11D96E57F98E43C95DA
-:1056B00057FFC2C3C852B124CF4579EB1D545AA33A
-:1056C000DF97832CB1EF6341798B3E99FC262676D8
-:1056D00044DF052A6BB70F0EACA0F177630141746C
-:1056E00060BC35BBB7FD24CAB34AB3D3AA7C93A12F
-:1056F0002DCDF2B7D07C27F214833CCBB364EDEF11
-:1057000064BA9E27B9FEB1EBD2492127A66FFD5E90
-:1057100062D524EDFBA92582FE9E9AE78336D0F35D
-:1057200041D65FB18CDFCF7C0BEB327A5F79448B53
-:105730008797EB25162F2B84641FE5D397EB970DE6
-:10574000A5FD24C6CD0A1C67C27115C0BF87A83845
-:1057500092C2F085F301BD77ABC0CC9DEABFDA2CD5
-:10576000FDDE236AEFCFE551E83DECBC9DD636AABD
-:105770005311279B591C1B27AA16AC93DF3185F2C6
-:105780000591E1C322A0BC0BD3111FBDE4053A0E65
-:105790006AB5BF8FD19F23BE5EA1F92EFE7A6C0140
-:1057A0007B6FB27B9C4CFA6B32A13DE8BEE6772260
-:1057B000FF4E82AED8E93B0E57611BFBCE9F92088D
-:1057C000B2D738077B1FB2578486577B899FEF6A11
-:1057D000387A27539A1E62F31ADFF3756A76ECD48F
-:1057E000EC5BF6E6C1AC4771DEDA4E89D53B30267C
-:1057F0005AE8EFE5FBA6BA86430373E3F651D7F107
-:1058000001FF2E0AA285F1DF439DD2D6D7F1245A9B
-:105810001C81367BBC7CDDB87E47C3F549CAEB678B
-:105820005965D75D38348AAA09631BF8899B7D576F
-:10583000A77F5F371FFCAC5D8870201CFBD5F5ACE3
-:10584000FE5D0CEDEC796DF1FDD944D741D7944C58
-:10585000AA5F5637BE9589D2DDD9BA7E2ADD3FCF01
-:105860000E55BE456DF966E124D5DDE8177FA3F539
-:10587000A3427D0B95A4F7BC34A985EE796789DC3A
-:105880000E7088DB0171A488A93DF7877E7052F302
-:105890000326BFEE07152B397EF4BFC7E8F68BE26F
-:1058A00087FE3698DE7D98BBD8772175BBADA9847D
-:1058B000AFC554798AF179A17E3EF3BCE021CC0BCF
-:1058C00088EFACC4ED7FF66812FBBB97B302E263CE
-:1058D000544FDCEB79E6A7267EEFF6A8885B14A987
-:1058E0005E7E92E969912D3482F484E7330C255C65
-:1058F0001F6F5F3592EEFB2687B2295F955EB4FA83
-:105900009A3C86380FD75262F7784F48FC5E2D518B
-:10591000DE1E794BF181CF289FB05A40A5F749E8A8
-:10592000FFDCEF8F71F93F3505326F1679BEC2EAA1
-:10593000E8217E56FF4386CDB756E8B97EB3B66EF2
-:10594000E7E7BC9E56B3807D8F932887E0E6EB2681
-:10595000CA634DE672E8E74E4F79B81D74790A863E
-:105960007AF8FD7DB6C2F6DD68EAC7E2D747626025
-:10597000E8503A2FB5FB31BD8EEDF49C62711DAE3F
-:10598000360DE1DFF786FB3A4FCF77D7CFDED879F8
-:10599000A7DF33C1C4DEEF05FD36B744769B0D3E6D
-:1059A00016F787C1115D3FEC9EE9FF019ECDEE1811
-:1059B000B0390000000000000000000000000000FE
-:1059C0001F8B080000000000000B7BC4CEC0F0A3BA
-:1059D0001E822538106C62711D0B03C30756D2F569
-:1059E000C17025507F0910E703711610A7027102DC
-:1059F000104703711810BF069AFD0C881F02F11D95
-:105A000020BE0EC49780F82C109F40B277191B035C
-:105A1000C35A36D2EDFF83E4E78940763910CF24AC
-:105A2000231C46F1F0C0F23C0C0CDABC08FE3E5ED2
-:105A30005479051E047BB92065766D03EA0700E9F9
-:105A4000CD424A800300000000000000000000007A
-:105A50001F8B080000000000000BD57D0B7854D58B
-:105A6000B5F03E8F79253393C9839040C493970452
-:105A700009382421F2AA1E0842A4D406F42A5AAEF8
-:105A80000EC823869044B02DB7729B21092F411B6D
-:105A9000152D5AB483458B0A36F268D106EEF028EC
-:105AA000C65BB4D1A282D536D45B450B4944116F95
-:105AB000B5BF77ADB5F7C9CC393349406BFF7BC370
-:105AC000C7B7B3CFD967EFB5D75E6BEDF5DA3B76E5
-:105AD000D9C6E42B19FB027FA09CA330C60644CA9A
-:105AE00051775EBB687B09FCFE99DDFFB8166967DC
-:105AF00094173389B1D1F09E653056CAD8954EF8C7
-:105B000015DA95BD70EA0F97A531B69F29CC018FA4
-:105B1000C26A59EAB7A09FFD9F333FBE975F706787
-:105B200075B8F1BB2063E98C5DC1F877E16C2DCBD2
-:105B300057881526E373DD49BF433FB99BEAE0FB75
-:105B4000B39FBAE97B2B1C46C93E9759587CF34555
-:105B50000EF6AB7EDC5120EAD90C066702DE2C1A69
-:105B6000D780F7D0DBEF11BC075480578B33BE13BF
-:105B7000E04F8BC0BF9F5D9BC40A39FC7A6904FE6D
-:105B80000B8587E60F786EACD7BE9997CFD8BA7AD7
-:105B900046E5DA7A2795ABEB7DDFCCB331B6B23E82
-:105BA00083CA46153E01381AB7B0501050EF2E8404
-:105BB000F646FFF03F21CF69AA3BB37CA6BA3D0D64
-:105BC000FA2988D455B766AA37BA2739036E1C1F3D
-:105BD000E6EEC0F19D5402984733001F978A79BAC8
-:105BE000B4E02C06EB91E7B66B2180E352F782E933
-:105BF0006C24B6CB27BCD9055E9764367420BC1FD5
-:105C0000433B06F31DE69EF23EF332F69FD94FF07A
-:105C1000796C606C203C5FFDEF751D12F4B732D3D8
-:105C2000AE35407F4FC0F86B1C5178DCAAFEB9033B
-:105C3000FA74C23FC4E3D08DBC1E9937D4A3E631B9
-:105C40008C45BDCF8EF473A1FDE6379BEBD67EF37A
-:105C5000347D12D2ABD16F3EAB68F0B9FFF7F67B63
-:105C600029E03C3525D2AF314EBFFD023954C0B7D3
-:105C7000F91B59289C1D3B4E9EE62F0FC2FBBC8D85
-:105C80002A0B65F3E769C01779FC57D6E49B94109B
-:105C9000288C8587458F93135997BC34FB1C19E8D2
-:105CA000292FE3FA4512D25573D4FAE63066F0CDC7
-:105CB0008FEA7D4C1FCAD8DDF505546EA9F7E9C8F7
-:105CC0002777FF5D99D55218CB8F7F11F2EA1E1B03
-:105CD00023FA0B3ECE428F4BD85FC5AC39505F3FA5
-:105CE0002ABDE82E8D885C4679E61274BC5ED26EC1
-:105CF000C8C1F6AF280CE5A0951FEEB6E9D3B0BF3A
-:105D0000B5A364A901F19CC7F921CF1676E662BF5D
-:105D1000CD39A382D88FFF55E287BCFC4B3405C632
-:105D20001D9627F861F4834E94873DF35F96AEE7A6
-:105D300015339664A103DF79D2816F42DF74F07569
-:105D4000F1C3D7475FCD7DD2D77AFF7DEF3BE0FD32
-:105D5000963CBBA664C7C295797138A3C21D4B6F30
-:105D6000797982CEFC7DD399B57CB03EC4DE011A30
-:105D7000BABF3E83E8EEDE7A8DCAB5488730EF07BA
-:105D8000B0E958A8231DE2B8D71551BDD77D8BAD1A
-:105D900020BA4C9FD5CC50FEDE8FF4390E875BA91C
-:105DA000EB1360AE79A20E5BA40C7BC0BDF87E1035
-:105DB000D575DCCAEE928CF6CF0675C0778A683F3F
-:105DC00075C5B3C146F8FD7E17AF5FBDA2530F6620
-:105DD000457D1F5CA7EB5991F6500F4F52A3FAC3B4
-:105DE000FE0BA3E13948ED8DFEE6AF38A10701BEF9
-:105DF0007B5DBCBFB52B8EFD53FA5F2B053240B5E2
-:105E000060AB2CFDACEDA9DFAB231E8C7172A45FDF
-:105E1000E8C1E8F7C16774DD1D797FB9746F10DFE1
-:105E20006F64157912AC43E6F48A0C06EB6FAF6829
-:105E30000EE296DB039FC077647E0F12BCAE0CFEB1
-:105E40007EC48ADFEB8D51EB3369C5CB4184D7D05B
-:105E5000731441AFF20B594B8F00BD2A49763FE9CD
-:105E60001BD701D364C278B32A980670C969150C90
-:105E7000E58192A6BE1BCD0706FD019C6309CEC934
-:105E800015B37A8133180DA701477F701B70F44E4C
-:105E9000A77C7C2B3D4DBA66CCEF26C0FE6D6FB75C
-:105EA000F9515D48453C4157ECF35B8336789E3AA7
-:105EB0001370ADD1BACD62B9B1FDA64D1FC4425128
-:105EC000FBF73F7A5DF3B0CEF116885E5FA8CF9501
-:105ED0000644F03856B4B3D29F313F5BCCFCAE35AC
-:105EE000CD8FA9818C0A4FFFF3BBD7E59F55E18E7B
-:105EF0006DF75B49A2F1274D19F36DC6C7630E908C
-:105F00005FC9385E5164BCE469301E76A636C71D91
-:105F10002F65328CE7FCFAF069E547035E7B0CBC29
-:105F2000B79AE05D6B03BE8DB3FE5F37BCE7CB7FF6
-:105F30002E90BFC47F797DF3DF3FBABF64FC153E6E
-:105F4000F94865E12B015F775CE524FDDE9073FF86
-:105F50006C7CA5E2A7B07E77BC547CE24A192B404A
-:105F6000D72322E3D74A1AED57BDD1776FF3810DBE
-:105F7000D6D4CFFFAFF9F486D7AF5B0E9DAF7C6D63
-:105F8000783D81213FAD2C642107F4B1B2ED2AB2F6
-:105F900037571E291BC8A05FDB9AE14C8749256350
-:105FA000FFD0DF4A43CF985CD24FFF5CCF00FB4E5F
-:105FB0006F02A56BB7B782F4A29512A3EFD783DE69
-:105FC00016023DA6E4950DCE3958F7EF70CEC1719B
-:105FD0006D8CF4E992570EF9CA80CE5D23524629A2
-:105FE00040022B5DC6F3A3E5A8E7DE55289E7B782B
-:105FF0007FF0BC02DB2788F6BDC1959007F044AD69
-:106000007FA2BD395011477FD76599F0F390D0BB7F
-:10601000EE46BD0B047262424B00F56A57BA5D7BD7
-:106020004C8AFDEE265912F306BD0DEDEC115332EC
-:1060300051CF3A30E389157684AF90915C77E5854E
-:106040007419EAEE02CEDB0F59F67D37AE21E95D19
-:106050009952994ADF99EA77F7E831D913516FF3EA
-:1060600016F0F7650D574C6C8C7ECFFC1371FF3525
-:10607000DE071A4AE97DA6B3E2D804183F13E468A4
-:1060800023E02B536D96EA685DD3E2EA8F1BE63B73
-:10609000678500860D331ECC9E1F673F81D534F186
-:1060A000E9A079663E7B48E0EF6E81CF4CE4F5D104
-:1060B000820E41BEB978D31EF9E61ACAE55B4241A9
-:1060C000F30AC4F7A079CC8FFAF686194F90DE6AEE
-:1060D0008CE32A30CBB94CD53CAFAF6B3E1B99FE5D
-:1060E0001D7974EFFD5BF96C230BDC8AED33C57E03
-:1060F0009E5010920285FDCFDF3ADFDEE6FD2DC413
-:10610000271FA74E1E103BCE3F0B2F996E18A7E4FA
-:106110001F3F4EC23CB3BC3C5FBCC33E20E88C2951
-:10612000B81F58EDAB84129FC464AAB6A31D4EF2EB
-:106130001BE0F6B0E6F24B80DE522B56DD2E83DDFF
-:10614000EC79EBEAF7D1CE4EED9843F676536151F8
-:10615000DB246897E4F7CD984274CA08CF6BB1335B
-:10616000E2BBAA1513615E8D8CF3DD66F996895C3E
-:106170003FD069BDBF2B70062BAEA950477665395D
-:10618000F1E66167613E6FE90B47ECF7BDCDDF16C5
-:10619000F94EF8FF9690DFB4BFEFD8743BF9118346
-:1061A000F00FEDD2644B3F49BA3DE2676488A7A87F
-:1061B0003ABCFF6D0F5FDFFE4F19CFC7EE736A4029
-:1061C0000AB63CD987F67A12F325AB2867278342B3
-:1061D00000A2D897D61D94B5FED7A589B1F29642F4
-:1061E0004E7733A2F4DC0E99EBC969332767AF848D
-:1061F0007ECF9670BF70AA0FFE17C5CE671DEC6BE1
-:10620000E1283FC7BAC2C7887F1B819E72802F8258
-:106210008532F9B7D7E6EDF045F3B5AC18FE6D2B36
-:106220007D304D2D15FA1FE047C99375D7C8AF4E85
-:106230001FCA97A48FC4E951DFB10B5FAF24E5C239
-:10624000E8E3AB8E67AC6B2C5F71FD246DE63C27F9
-:10625000EA3BAB326626C593B3BDAFEB7DB4AEA8C7
-:106260004F84E2F49FA64871FD39567D9EB1A5A6E4
-:10627000F5520696CEDADCD7BAA599F161F4EB5A5D
-:10628000A668FF85C24BF5915FDC29FA5BABDD1791
-:10629000C4FDF32CEEED800FA5795418F53D96C79B
-:1062A000FC8FF326A487B8343D443A24CADDD208D3
-:1062B0007CF62CD9349E9A9660C2379B05DA761408
-:1062C000FCAE657682C389E3C1388A0F3A94D0FF69
-:1062D000CFC22E2FF548FDE1505FE462FD4E131D45
-:1062E000ACCE2A8ABBDFA9625DD16CE5F47AE7F90E
-:1062F000C917EB78D799E13DEFEFDCAAF66E1CFFEA
-:1063000071EC772A7BD7C01720F1961E7AE7EBB4A1
-:10631000CAC6F64849200F32AE67010DEAF80A36C0
-:10632000EB35588E453A2CF2915EB05552114E62C3
-:10633000690DFF737DBE10955BE84F7606084F8AA6
-:106340005B67D45E3B3F7DFF9CD0AFD3843E6FBC88
-:10635000FFA162A77E5556C1D06E3EF7F6D40CEA77
-:10636000578747A51138ACFD162A811F2A0390ECE8
-:10637000383CF801FA09584701F9B5F305CECE3D8E
-:10638000303389F5C15F0F59F8EB2189C3C92ACE93
-:10639000CFCE380763B6637B359040F1B29305C426
-:1063A00007B962FC27D6CF4DC0F19FD8D8379F1BC5
-:1063B00070FCB4DEC9C2A0A786EA7D541AEF43C2BE
-:1063C000DFBF59D831C6F3738A4C70EC137CFF845D
-:1063D000B32281FCE7076F9C360CF82BE7A8E24755
-:1063E0001D4F5BCB52FA1A3F3B68E637A6CCEE1343
-:1063F000DE656F4D9C71288A1F7FA178D2DE1D0E4D
-:10640000BF5CCE2E47FAEBEFFB73F5FA8C43F95FD6
-:106410001D2F9B85FD79AEF1772B48CF095F49FC95
-:106420009923E448CE3C2E0F72AB594843FEFDFC45
-:106430000B164D1F6099109E32AB558DFC4D4C775D
-:10644000CF81F743C5DB4C65BA8C5BF850D4BF50A5
-:106450008E6CE2FE73C3CF0FEB7E17CAB9CDAF29A6
-:10646000640BE7556A0DB8DE39EBCDFEFDC12CCAD1
-:10647000EF8EFE7AA1D7655AFCF85F751D3A701D44
-:1064800012FFF9EB105219D19D51D72456116FFF0D
-:10649000FB44D0A9B6E210B743C0F87B272A1E01FF
-:1064A000EB99829BC04F83F74D44BB35B886F9F317
-:1064B000E3C84B9B9A48746F637A7828FA0FE65CBE
-:1064C000DFB117E5D50466925F71E4864DC5EFD262
-:1064D000B8DC080567F2F27385E265F9EB5908E369
-:1064E0005B9337D4ED47BF5E6635B79B33D7042542
-:1064F0003BD473EA981F87C9AD64BCFD6C16D27992
-:10650000BCE66806D0CD104137430C7A5966A69791
-:10651000C17596B8D01A737D20D2057C37D0422F32
-:10652000D67E723446F1B8BCF5328F17CD32C77DB6
-:10653000F259F7FB3F0778F30FB9FD61161B6FB2F5
-:10654000F6AFB24001E265F70FDDFF590013FCD949
-:10655000FA49A98817902749244F2AE2DB3D31F4F4
-:106560006AE81BBDB48FC84FDEAEB7F7ABF2D39766
-:10657000CE0538D67A7446E307B349AE2B225E794E
-:1065800030F37A6707FA6DDC4524DFF7631DFD3CC5
-:1065900019970C8C96F78AF02319F546E147B28ECD
-:1065A0003755E57AF07B4C9F8A7818E50864605C83
-:1065B000CF9691BE730E8C67F381BE15E7BBB16AAF
-:1065C000029FAFA6FE2D1AFFB071FB481E32BE1F00
-:1065D0003377CA79E1A3440DDCA442199C04660414
-:1065E000D27F0E0B35E2FAD635F3FD2DD2EE16D161
-:1065F0002E8879053DED02D06E84A9DD3C9C0FB458
-:10660000D34DED2A62DADD26FA63A671F598716B37
-:10661000447FA4CFF5B4F3C7F4B754B4233DB0A777
-:106620009D16D3DF3231AE6E6AE78B69F7EF067CD9
-:10663000A6719979DC9EF7A576E33DF9630FE44FE7
-:10664000217A39943FA57C2E8CB3F4451B97115BBE
-:10665000793E874157FB45BB26A4AB42CC5B6163C7
-:10666000AA294F85E7AD34BA673A0351CF7BE8CA10
-:106670003DD317FFF95C537B758D8BE9C5F49CDA2C
-:1066800037FD5D11F1AA1F4C427FEBEA3459F8DB6C
-:10669000AE69D05590630354537D4D86786FBBA689
-:1066A000810262223E02B2F29B8551FCDD33FE3F45
-:1066B0000B7EE13F8EC03FDB02FF6C33FCA2EECCD1
-:1066C000E4EFD595B327E17C0CFFF2D9A6E50D41A7
-:1066D000F7FFE6F95559E65765995F95697EF69596
-:1066E00055938279FF97E6B7CC32BF6596F92D3383
-:1066F000CDCFB972D905AD9FB5DDDDB66692B76B6A
-:10670000F35F27FD7FAD88E326ACD41B56E07BE02A
-:10671000ED76EA4F23F93E8AE99FA33CE8EFBB47B9
-:10672000548DE482D323935C60F9F6507E36876BF8
-:1067300026C885E7541F97DF02CED72CF50F2D759D
-:10674000F8E56FB86FFA9861475AE47C3FFBDACA04
-:106750004CBE9FACF2F8E5E87D4D15B83938A094F1
-:10676000E44FA38FCB9FFD03843C4A837D8DFC4483
-:106770001924AF6C425EDD57CFF3D89A457E506343
-:106780005A11E1A759D80B2C9465DA370F4C9CD2DB
-:10679000867EAB334779DEE23A1BD7C756D6339DA8
-:1067A000E8ABDE49F945FBA0DF003468057D0FCB7F
-:1067B000E741DFC3724F7D0695BFACD7A8DC01E38C
-:1067C00062F94CBD9F0560FC6DF563A8FC31EA8B56
-:1067D000503E20F4C52BD264F2576CAE872D339F08
-:1067E000F4482A1FA9F78D5561BC9FD46750FD233B
-:1067F00069E6581BD9AD1D8D4900E7EE57F3285FB8
-:1068000069429A4AFB2F53C34A5249E4B981D78F50
-:10681000A44957E077E33264DECE196AF4C66F57B5
-:1068200086EDC664A8040F7307156F5ADC76E5364B
-:10683000C04BA95BF4E70B347AE2F7F72D6C57E411
-:1068400016FDA5698DEEF8FDCDC47147FA381E58C6
-:1068500046474362FC763760BB429F986F56584E5E
-:106860008C3FEE6C1C3725A53980F1AD2B6733D2F8
-:10687000476D69DA66292A3E141A50C164A0F39460
-:10688000D4E63A6CF78D809FE5C0F89AD7CF64A024
-:10689000679B1BDE17624E138F478DBF0EDEA33E34
-:1068A0008CEF4744BDC7EFA11C3B4B7C9F647EDF50
-:1068B000A397AF613D793C98BC646B32D79365CEAA
-:1068C0009FCB571E98847C9F6CE7EF7F8A75D4B767
-:1068D0009633431EF1F609FCFD8F8CF65EFEFE1723
-:1068E000A27D4A0A9FB76B8A338471B147BE7B4948
-:1068F000E6DCC2C87C2FFA5EC1B0B951F37BE47B01
-:10690000E332E7BA23F3B9E8FB1386CDEDC3EE49D2
-:106910002D977B7264516E25371792FC1CE5A820D9
-:10692000B9336A60A98EFCACACE770FD87EDAE862A
-:10693000863C822B88F2C680EB278BCD700DAE3162
-:10694000C3F5931A335C836BFB866B9D8DCBB5DEF1
-:10695000E083F1F5E8F11FFD37F3F8437E601EFF99
-:10696000D11F98C71F72E7571E3F1CBD2E9B6E3765
-:106970008F9FB5C43CFEA625E6F1B3967EB5F1FF28
-:1069800051FA78922D70C426F45D255AEFAC0B981D
-:10699000F45368F78A681754A2F5D840C0A49F4200
-:1069A000BBD76D42DF35B5AB8869F707D11F338D93
-:1069B000ABC78CDB21FA0BCBD1FDF963FAFB8B68FB
-:1069C0001794A3FBD362FAFBC080CFD4CE17D3AE0B
-:1069D0004BB463A67199795CF82950A19FEFB30479
-:1069E0003FFA47964D5E4371AF812C20A1BFCF97F0
-:1069F000CA461D82EF592ECFBF4F9EB2EC62B43B08
-:106A0000D7249BFD5CE9766E9FD9EC0A95BE44566F
-:106A100047F900CE60E68CA87C8B6A3BDFCF7ADE3C
-:106A2000BB8399D746BD1F28BE5F23E2D469F6D247
-:106A300046942BBEC1D03E8EBF22538C6BBC67697F
-:106A4000FE761DE0DDF8AF3347A3BF2832AE8DB729
-:106A5000BB588C9B151FAE35D97CDC45386E213E6A
-:106A600037F48B6026E1D7C74BE3F9839EEF49FFEC
-:106A70000578593DD9292B49F07E3DF76F1A7EF6EE
-:106A8000647B9D13F3761B2F92D963D82EAB6F3F97
-:106A90004E53BDD9DFA9FA2A74B4F70655FA8A1401
-:106AA000D6FB770F97CBE5F1E20DA3C5BC9A2A2759
-:106AB00035E7C1F8EC90D96F0B84CDA2F3610A954C
-:106AC000C0687B3CBF6D538129AF3E7950DF7EDBD0
-:106AD00046A15FF4CC033A8AB77E370AF8D8C602DB
-:106AE000939E959C3293F4ABE486AB9DBE38DFADAC
-:106AF000B5F4EF6233756C9798D6CC64EE5C34E9EC
-:106B0000614DBEC7F83E94093209E33F693BC2C8F4
-:106B10003F674BF8790A3523149428CEC1E7896A78
-:106B200025FE24AAE1A00CED076D54593895B1FB60
-:106B3000E5C08D881F575E33F9C7549F2E219ECE26
-:106B4000D94257D379025017E3E57FCCB3733FF0B6
-:106B5000C3DACCDF65C759C7DBEC9A492F1DF4A90E
-:106B60009D858B7B6F1F69C7E1EAA1D30CA04FE421
-:106B70006F8DD3E9ED8ABED84EFA5A968FFC8E8679
-:106B80007C35F85FC4B7E78E61E247BBE10F308F19
-:106B9000DBDA6C3CBFEF73681D15F7B94DF8BFE643
-:106BA0008A78F73C56E1C597A7995C8E7C759ABDAB
-:106BB000EA2D8E5AAFB5763B1F678D8DFC5B463C48
-:106BC000777EB3CDE4EF5AB8D15C5FC066A6A35C14
-:106BD0005AB0C1C6F07CC76D167FD8BFE17C615E3C
-:106BE0000B59DD2AD4D38DFCA0B93EA662FEF7E294
-:106BF0005F3D528A7943CD769EAFF301D08B16C5A7
-:106C00005755EE901DEDF97776155F3F9EE1F7A1A0
-:106C10005583509E26B3B8E78C6E5D6386AF3FF810
-:106C2000ADF032D640F0F60687BA558AEBBF7AD47B
-:106C30002E99E244CB9CDE910CE4CC39172F7BFCDF
-:106C4000297F74917CDF27E80836C0CBB89CAFBBA6
-:106C50001CCBFEBE3BD8CB778B9D1D76E48F5AB5FF
-:106C6000AE5C92237126872DA00F86EF6C7B268663
-:106C7000073353BB35E7D9AE4DCA39AF76E5721F3E
-:106C8000FD750A79F9C2B69FD9D1BF78FAA913D791
-:106C9000201F2EFAB5C29CD0AE739B8785715F50C2
-:106CA0004376942755BB94B871598AFCC3FC17FDF1
-:106CB000C24372A26A8723341DBEAFFAE53B231993
-:106CC000E0A1B3A1FBF060DC479F92787C34D8311F
-:106CD00012F7AD2A95DD122F4FEC84A0BB53CF25C0
-:106CE000CEC27595B6EEBF99FA6DB9C1E688920F1E
-:106CF000C7C4BE04EDB87FED4929941F477E18F143
-:106D0000AC534F4A1CBE3DB6900BE1DBBAD91E0016
-:106D1000386AB77E487454F68BED5EC443ED1EC5E9
-:106D2000E4F7ADDDAA841D23A93C8125C65124E0EA
-:106D3000EB1AC6E563CDAEC5E40FAF6959F7A1E222
-:106D4000C5EFCDF40C78F18711AF6F28FEE958DF5D
-:106D5000F973AF06A8FAA0FD712FE215FA9D634FF3
-:106D6000C278AED98F8DFD7F9A12DB1F63DD76A4CA
-:106D7000AFDA96B57C3C0BBF7C80BF64C6C64F9C27
-:106D80000E4B1C6B6BEA79E9898BB69F7D3408E367
-:106D90009DDAF1D74783B87FFFBF8F1EBD13F59AE9
-:106DA0007D2E1FF27BED53AF7959D43E98E3E07C02
-:106DB000D7F9E4CF9F7818F8A4F3B8838EEE75EE78
-:106DC0007D6F8806F3ED7CF6BFD335687FC7DEABF9
-:106DD000C8EEBF6377D9C0BEF643A4D350F43917C9
-:106DE00091C7A4ED9150D902435E94967539B84B82
-:106DF000612E80F3F4314708F39A6BE1D9B2225C3B
-:106E0000A7C5247FB1BE1CF05BB36DF587CAC878F7
-:106E1000780E0E9631C79E01BB64E03A5FFBED6FC2
-:106E2000946069A338492DEB26F969FDAEF628ACCC
-:106E3000E765BDAFDF59F6B91D8378B5DBD6F271D2
-:106E40002DEB771A7F191BBB7EBA65FDCEB2EA9F88
-:106E50003E8C2F77A5C68DE71AF1AFC5BBFFA54FB6
-:106E6000BDC99003FDE1B752E270791C7A8503F940
-:106E700069C7D34F3C9CC6D7773A20A473FBD9216E
-:106E80000CE8E3A4ADFB66948FDD7B1D3EDCCFAB4D
-:106E9000F6BE41FCD5B9FB15BB46F291B925D0131E
-:106EA0003A59CF4F3BEA0D3512AFD46EF1841DDE57
-:106EB000C83AD58466946B5E7A7E829E8738DDD729
-:106EC00084F65F27C559B7D58E1C2E8F433C696F5A
-:106ED000F1963FD899DBBC9ED2185CC71353F0796A
-:106EE0006FEB68CCDF87F3BF3C6A3DB7707EED8DFA
-:106EF0002F3B373B54CC4730D6B7D3C6F5FDDA909D
-:106F0000F4068BC3AFC6FE76A1F1D00687251E2AF4
-:106F1000E6DB1F3FF73F8F0BC3D3124CAA1C1D8B20
-:106F2000AF539FC797EF8F382401475DF9A0DCD896
-:106F3000FD496515C1C1D911784F8973B3A79E5218
-:106F4000424178BEAAE520C969AB5CA8E9454F7EFD
-:106F5000C6186FCFFE9128BF4E1D788EE8B066DB55
-:106F6000093BDA4787B7EEB4771446E81EE57F742D
-:106F70005EE4A967F68F24398DFDC7599F5F0B79B1
-:106F800057DB6AEEBF76DB87A6FE17055BECE417DE
-:106F9000ED679C0F54FD069CEF07ED368679F71FD1
-:106FA000B428E5F1F49B90C366CA835AE5293D866F
-:106FB0007E4525C5AEA1BC6B5AA1BF11A4738F3607
-:106FC0007EEE51D58F39802F1B93ED1ADAAB4D9E93
-:106FD000EB991625B79B2DF8F4A5F926625CCD3701
-:106FE000B9A224DA7E32E04FD66513FC7778CA075F
-:106FF000E27909B4C3344C3250FDE45756BC53CA4D
-:10700000713E8A4FF6B9E2EECFBC3FF4B721FDDB0B
-:107010007C32D3A2E86B54D9F5C3D1D5A632CD9436
-:10702000BF7AEF641EC735E67FEF456C1303B97B6B
-:10703000AFD4DD86F9ECC1AB795E201376BA17EDDB
-:10704000F4EC587D8EE9BA86F287C40F6FCF7423B3
-:107050007F147EBE0FE0C898BF23FB4999FFBEA2F4
-:10706000533E8F1DC7CD45FB2944CF135998EA8A5B
-:1070700093CB1F0FABA3E749ACA319CF30BDEDA84D
-:10708000F8D401CFEF2B4F9138DC61CAD74816E313
-:10709000C88959997DF13F9BAC9E8AF6FB38D8266A
-:1070A000B24BD0EDF8456A040F463E9CD1EFBDAE21
-:1070B0000912EE3738BFC178AE479C9FF7F5CC5721
-:1070C000A7FA00A36E19075BFA4AC5164BAC1890D5
-:1070D00054056F0D68263FC720D64265166BA73250
-:1070E000C5E9935482EF2DF24BC9ECCFEC8B440BE6
-:1070F0007CE7A18F9F93F5E301281B6DE2F9DB9EEE
-:10710000D0E350DF90CC4CE783739D9CBF2F77CAB0
-:10711000865F26106D7735B26A9ABB2B8D1F63315F
-:10712000BEBBDE1918EE8CA227C5DDCEF3BE84FDF2
-:107130006BD8EB5729CB29FEBE3A83DBD5BDADCF4B
-:10714000CAFA0A935D6D2D9B0738E76C66043FF71A
-:1071500053494E7E7E59679A2F9AFE605C67697428
-:107160003EA3AE937D2FDEDB607AF8D28178546245
-:10717000E96F06D2DF68A4BF0ED14937F9296E57EF
-:107180000257E37C33F2EA24FE3C2071BF97AEE065
-:107190007CD345FF72627566A08F79B259401F514A
-:1071A000792D1B84FDA8AA4C4D284278368975B7E5
-:1071B000D2A5393FD5D0D7DCA2E6107972BF2979A4
-:1071C00095CEA3A8696ECA4F719734DD8EE77C55C2
-:1071D00056E743F9E936F24FFC3C9FD0B08B5D0592
-:1071E000E63C4E87256FD526ECEF983C6EB1EFDE7E
-:1071F000830FE2E8C3D67DF77667FC3C2436267E13
-:10720000BEA0A1879D2FDD5BEDC86A67FB611ADC1C
-:10721000A7539EA52AFC0D13AFF3911FBC6B9BC413
-:10722000CFAD59E8A86B47D2489487C8BF78CF45FF
-:10723000A2782E6DDBBF1FF5A6262FD3935348CE21
-:10724000694A2E9E971AE594A05CBCEBC3977F8D8C
-:10725000FEF55685E1D6DCE536E2937A322E5622EB
-:107260005B6F5ADF0B9D4F6C5C91F3DB129FC16F1C
-:107270006EFAFECC3689CE4F296CF88FF1FC436D47
-:107280009B8D85E0FD19C6FB3FB389EB030B5F8443
-:1072900051F03CA8181FF7A5E8FD23B53C8169D142
-:1072A000793C41BD1DCFFFCF13F8185091627AFF92
-:1072B000D7B9E56DE49F09F07B0006CE1A64EA6F4A
-:1072C00091B27C2825E1093F8606FF90FE8CF99F4C
-:1072D000930376BE4F542485499F01FB17ED86909A
-:1072E00044F94A567F47CD1E89F6A7DB607FC2F37B
-:1072F00038B7852CF6A3258FCEC0B7952E0F3985CC
-:107300007DE066EE5EF0EA0F97507C94F86AC98BD8
-:107310003C2F6CC976294479CC1D439318E159213F
-:10732000BFD17BACEE41D83922F46BC19B23C38C17
-:10733000679766C673628119AF1EBF198F563C27C7
-:107340008DC931B55FA454DB89C8049E0BE01FE2F0
-:1073500019E420CDA306E611D662F159D97AEF2AB5
-:10736000F46FF48B470BFE4E59F07796B5EEE76F4E
-:107370005985339D589BE69DA986897FACFC66E0C4
-:1073800029CBD73E919EF93DE42FCE109D48F3F8CE
-:1073900077839C2D9C798AFCC46F467E7062CF7E79
-:1073A000F90EFB02CAA5330E9D98CB62F96B1396BA
-:1073B000C0D72DF54EDFBC7C8C4F33DF3C1BC6ABFA
-:1073C0007D54C6D947A97FA047DA0FEEC1B8641A29
-:1073D000F2B54AF12B5CAAE9504F6CB5F9D06F7940
-:1073E0004F51F735A8B7D7CEE7798E372770FFEB27
-:1073F0009204BEBFDA12785EF35D1532D3D1BE6F50
-:10740000554212FA8B7CFA8B57A2DED56AD3685F9D
-:10741000F375BFFC1D7A5FECC3F86EA6DC3C0AE195
-:1074200080F6E46FEF6A7DC77B6B94BED3B9E7FE4D
-:1074300061B8EF3C24B3CA787A7CBE8BC3D159F0D3
-:10744000E77424C7C5CE6EB2A35777D455E0BC0C01
-:107450003BC2BE8BFBB76AF6CC207DF2D0027E1E0B
-:1074600073F7297E1E738A32FB9B23A03EF6359567
-:10747000CB4DA64F9F93CE5328701D3760BE24F28C
-:10748000C17FC9A106C24FF3EF314ED5F81795A1C0
-:10749000FE5852B780F69F5F7BA7B46159AAB71414
-:1074A000235F4F6E4D9E88E7646ADFE27995A3DB28
-:1074B000CDFE1CA6541F443FD8D9637C5BBEFC980C
-:1074C0006AB5BB14DC8FC776989F8FEF876ECB5C55
-:1074D000623FF2B2F40BC98BFD91AC4F73917F9474
-:1074E0009FE3F2ABF1EDA74713B87D037891504EBF
-:1074F0007575337F03E0A96BDE209A6FD7C7FC6AEE
-:10750000A6AECF95F278F6D12D2E4E2F0FD979DC7D
-:10751000F6A105EED00A98C781055517A35DF4C9F9
-:10752000BF052E8E17A788D8072C49A63D4F4F625E
-:1075300063902F9AF8F932D69C19EFFCBCC10F0664
-:107540007F187C91B9202110CF7FF98E8BCF6FD21D
-:107550008202CA83EDDC27518CA7B301E0EA038FD6
-:1075600041D63018E1A9DDF311F9179CADF1FDD03A
-:10757000F5784803E9B621B8623CE0EB7BC0D44122
-:10758000E4077B7376BCFE836C03F99B16B834E288
-:10759000B74E27B7A399DA9C39D3837C5276F52A64
-:1075A00080F361E03F24F9876C7E823BB89831F22A
-:1075B000AFAA9CFFB3AE619BEF8AB2B7D6BA263EA4
-:1075C000E082FE1E70F178476AC02F21DCFEBF9F6B
-:1075D000F362FF5D9F3A68FD06093F8FF15D8BC046
-:1075E0004F5982FE23FC9E55A69130F407BCBE790C
-:1075F000B0FF5FB607F01D27BFCBD077520220FB4C
-:10760000009E14B74CE756D0DE427BA296193F414C
-:10761000523E0DFEC34366783ECB90B752AB14F694
-:1076200080DC2C71BAC3E84F49A98479633C8A395C
-:10763000797FED667D14252FCA5D94013C599EDB50
-:107640003B861C36E477533297834DF7AAA146094F
-:10765000D3DF3B5CE83FCED6B549985A95A26A94F1
-:10766000E7705125F3075148E63E92DCA3F78C679B
-:10767000ECD9BF2B71FD1B275DDC1E294B08FC0AD2
-:10768000F135B2ADFB00AA4F7E174BC5F59E22F433
-:107690009BB1A7B93C32F2FA6B85BD619547CF012A
-:1076A0009DA3C018FB0DBEEF8D3DEDF623FDF4C884
-:1076B000A10553681F2D6A2D3E88F939456F717EEB
-:1076C0006442FE80F54678296D0B2A880FABDCE911
-:1076D0004FDE18F2C4BACEA05CF7D4B30029C56D52
-:1076E000C06751FBB7554E1D7389FD55C8A9B36CD2
-:1076F000C2C0ABB4083D152DF31F7444D18F21A730
-:1077000022F414223AB48E2331674FDD978BF2E5D1
-:1077100088827E90AE893C3EB942F051F2C7A1AB5F
-:1077200071FE1B5AA7BA90EE77B4953991AD966465
-:10773000F0735EEAFEEB824C904F745CD7C69C1AE5
-:107740009E291F0F2B8FF8507C508F9AD79966492E
-:107750009C73D492AE8B733F82512EC9E0E7B8760A
-:10776000B4E524713B334CEBDE43F7C20F61F08587
-:1077700041EF56FA36F8A19171BF84A13F28528B90
-:10778000B00BCD7E8146C3CF1174519CF80EA10F72
-:1077900036BA2F5937017E6D0A4FF2615CE20E4F07
-:1077A0000EE533DF3180E3CD8A07A3ACFD14F4C3CB
-:1077B000A8BCF35AB59BFC5AB59FDA4DCF0DBCF669
-:1077C000860F03AFE310AFD297C7EBA7B8BEA36392
-:1077D000F1FB65E79DB5644CDCF372FF57E63D9E17
-:1077E000057EDD4176173FB761D097212F4A976E0E
-:1077F000CC24E26837DFEB65C891317BEA0EA28AC0
-:1078000068951397B5B26B114F63C32AC3A32EFDBE
-:10781000C98D8FF1974C3A7F716302F0DFA817662C
-:107820002DDA068F466A2C753A0035B25D2539C6C9
-:10783000DACF2F0ED512FE381DFD8B865E1A8357C8
-:10784000A1971AFB8B11075A9710A8C4F1A53DC048
-:10785000375ECC3FE5F6EE5A57605102B44F0498BC
-:107860001330D7AE209CCDED53335FF6C687891613
-:107870003E6B01BCD03904D8E7F2A558388CF1F33F
-:107880001292399C406DA8BF6495323E580DBFCF0F
-:107890002E6B240BE03E8CC736719E6B85FE759770
-:1078A000A55CEBAA68C079D9541674147D79B80D1B
-:1078B000BFE0BA043D88F87096EB348FC13EE647CE
-:1078C000BD7EB0DA22F9018E946A4DEA71D618FBBA
-:1078D000379EFB99AE4D44BA189CC7E83CEC60D487
-:1078E00083E2ACCFA6041EAF5DECEC388C21F3DA5A
-:1078F000E975E5DE3EE2D3917B06FCC24F65CEC35F
-:10790000E8DAFBC64518977CFBDF3FF260DCE94F05
-:107910006AB707E13CB9FCF71EBCBFE5EDE5DCCE7C
-:10792000B8D9A2CFEC14F84B4EAC780AF1774BFDE6
-:10793000DF4BA3F99D2DE37194DB420A1A9D3DF4C0
-:10794000BD686B22F9E68CFAE2965453DDA0D3C5EC
-:107950000E9E27659DFFFBC28EBA6DDB66FB600D38
-:10796000C70FB422BE4F0A7DEDE42E0FF9330C7819
-:10797000E66E1B65473CFCA9D521E2F0ED368E7F13
-:107980007D3AC6CF026229AC701EDE9748FDCD7FDE
-:107990004021FD620E8CB50CE83BD07A1BD9D9D6BC
-:1079A00079CC7F5B9B3210D66FFE5A89F4526CBF44
-:1079B0001CE821B06C35C5D9ACF39C13B4C6339721
-:1079C000939D6ECDF398C7B47513B2E3E47BB4F224
-:1079D00038F9C27EEC9A3F26087DA1945D8EF9E8C5
-:1079E0006759E18F0AB5FEED9A93F58C92B43EA8E3
-:1079F000775279AADE47E553091A8F67EFD97F9846
-:107A0000E84B6D2F457EDFD1F64EE24D5A446E5F56
-:107A1000B1F9A3833F817A31E3FE1BC33F3E5BE0B4
-:107A2000FB4A21BF170A7DA0F8D3BEE5F76C9CEF97
-:107A3000C858780DB93D1BEF958DC28321C7ADF8AD
-:107A400038D3969B887421255AE3C05F0D2FBD7DE6
-:107A5000B758899F3768F0CF53C21F306FCB8C5512
-:107A60008360FCC6BDEF0DE1F702B3A3281F0CFA3B
-:107A7000B4D21F637576E4E71E3A6BBD9BF063D00A
-:107A800005F05186883F66A0DD67A5B7FEF2893A0A
-:107A90006D1D43500E58E9AB536271EF154D4DE427
-:107AA000FEF2799A3E05ED50D85E56F1381D973FAB
-:107AB00027D5E6C377227F6EE1FCB1F857DB7F89DB
-:107AC00072A7EA170F7851EEBCAF36A7E378D58FCF
-:107AD000AFF4629CFBA41AF4E2F7EF8794B87985BF
-:107AE0000B1325E10F37E72BB035C16B906F3F7952
-:107AF000DCE6433F43ED56078F83EFE278833A8F0E
-:107B00007FEF8A9FAF50F5F307D2359EC76ACE5BF1
-:107B1000D862A3FC13F497E130BDC5717BE2C22D9E
-:107B20007DC7B76B77AD8B9B7762E40758E9F606A4
-:107B30000BBD025EC88E09023CE4161771EBC62726
-:107B40007F3CF204C0756ACB6FBD5261B4DF9CC745
-:107B5000C7CFB4DCFA530CF1F446AF9D82BE237A52
-:107B600043286E1E43B52DEC453BBC7AB38DECBA71
-:107B7000EAED0A73623ECB7107EDDB8BB6FFE6F5EB
-:107B80007100DFA2676D69D3F934285FC158A79EE1
-:107B90003C12B12E553B7FC3E3BD9AC82711EBB30E
-:107BA000E8D9FD76CC8BB1E2B1AC65BFBDC3928F95
-:107BB00040EBD472620A9DCB7BF29C1DF7D3F7F7A2
-:107BC0004974BFB2F5FBCACDBFF1A27C403C515C09
-:107BD0005EAC57EFF942E16B9E2FA176E487EB6D27
-:107BE000FDC6E0DE3A9AE8FB99E761FCCA371D94CE
-:107BF000AF54F9CC52CAEF794FADE374FEC8CA74E2
-:107C0000DC5F2B6DC1741F95FC79E5A3DF25FA5B62
-:107C1000F8CA77D3F9791E3D93FB6D829938BFF985
-:107C20009BFE85E6B7800588FE2A1F512AD05F7229
-:107C30005665E5CFC6E1933F093E79EF310706511E
-:107C4000D97BC26F197C5511F7FE5AE349FCBE95EA
-:107C5000B3C28EDE95281BF71439A3EDAADA2DAB3B
-:107C6000DB717D3EB8481FE8A3B8BE1A14F89248ED
-:107C70001F7FE5AA81428ED13D31869E5386CFB1CA
-:107C80007DBB8DEE8B89FACE74DFCB1D627C803B91
-:107C900041BA0CCAF4F8FE4C8F5B32E0E3F92F06D0
-:107CA0007DF5C6F75B783EC9C747B95CC1BC187A99
-:107CB000DF6E0B0F34E5C3384CF78944F23D6C821C
-:107CC000AFCDEF014ECA57E9C1EF3E89E2AC0B36AA
-:107CD00038CC79703D7463BDE7C69CBFB2D0A26F4B
-:107CE00019A5552EBC69910B6CD3F9E5AF54DB4255
-:107CF0009477547DDC41F643F5765B05E2E3AFDB38
-:107D00000EBE7E13D0F95F5B0CBE35CB572BDF5612
-:107D1000EE18CDE2F1ED5FDD7E16976FE1795CBE86
-:107D20007547E2111AFBFAE4EBC25EE4ABE28ED1D6
-:107D30000792302FF783A7165D4C7E060B5E0DB9B8
-:107D40006A95978F246AFCFE8298BC3ABE9F47F2E0
-:107D50001D39FE0C7AAC7A7A318DD343B7065D1AA1
-:107D600074DB4B9E96158FD6F72FA23C1A10EBCFE3
-:107D7000084E620578AF5EA39D15A0FF392827F84D
-:107D80001FCF8E93D7C1EA86A29ED1E8CE8E9B9F4D
-:107D9000EB77FBD08CC573654ABC78B7BF4C8EAB14
-:107DA000C797B8B95CD98BB40065B59BE3AD49C43E
-:107DB00057C012A4BC7FF429123F257B899F6CF029
-:107DC0009CD1B94A3F9DDBF627CA1F69A08255B8EE
-:107DD000B5292AFA538BE5A5B9505FE82EE6F5F1EF
-:107DE000F2CE1CA8DFE62EE1F5CBE4621B90E61391
-:107DF0006CF494C950AF31E6392FC9E4DF50E51374
-:107E00000F62DC457D9EDF17B70EF8DA591489F74B
-:107E1000263A58D05584F7344209F555D9BF5F85C5
-:107E200046E00647E01A37C9A3491AE2F594CF495C
-:107E3000F932773C7715E56756BBB9DF78F8CEF1B4
-:107E400074FFEED730FECDEE01BD8FDF64E3FD9C05
-:107E5000DA31BC0CF13AFC62467E0803FF45AA46C3
-:107E6000CF5D2D78F494F83F03CF7F3426DBA99FB4
-:107E7000EA9EF53ABFB251E43528899C0E9424B9A4
-:107E8000EE5928978AF5BF43E0037FD05EEEDA3BD8
-:107E9000F0317EDF53F7105C5F4539F347D41BBBED
-:107EA000FF35D18FE757DE4CE0F8BA2169BDED52BE
-:107EB000A81739872C45A27E53DAF65D2CBFED0951
-:107EC000FC90E39F85B1BF9B6E56787FEE3A0FDE44
-:107ED0009F26E95C8F96806866031E1A75A6D97383
-:107EE0009145CDF9168A52D41DA6713DA671591639
-:107EF000EC83B04E378CE5EB0438A57DF18D31BCB9
-:107F00003E2B94D3D8A1111CF7201CA31CA18BD00D
-:107F1000FEB909D4224ED766FBDB88D3D7FE4526AF
-:107F20003BB356D21ADD50DFF91623B9DC99E015C0
-:107F3000F907FCDE19C32F31F6A5B965B864257BB6
-:107F400016F13C0EE18732E2E86759AB829389F182
-:107F5000535BE4E178B69EE4647FF1B19FBB457C5E
-:107F60006C101B7481F1B167DCE7111FBBC86DE8B1
-:107F7000F322DE2EF6FF334772285F485531278FF4
-:107F800031BBA6508A88F1DD2E8BFC35E878C451D0
-:107F9000DFAD88971147D92DDC5EEA253FE224A3A7
-:107FA000BCE6511D05941F61B3E6471C9329E1A966
-:107FB000F4C5620DF1D924E2C6171AB737E2FEC53F
-:107FC000FC514C1CFF796F39C5418B7DF1E3F8E31F
-:107FD00094D914776047F8FA19717CA6142A08E737
-:107FE000D930D86008E751F3DF01B93C2DA8505AC9
-:107FF000CD5BE6E7E32C74605DEFBF58D7FB7CF305
-:1080000020DEE7F7AA8D6223290FC226F2207EC95F
-:1080100002F747E7411878EC2FCFC49A5762CD2377
-:10802000C90C98F134B8F252D3FB8BEA8A4CF58B29
-:10803000978D33B5CF868D30BA9EBB669AA97D7E6B
-:10804000F34C537DE8C69B4CED8785E69ADE0FDF47
-:108050005AD5E7BA8F6859627AAFC8A162BC0FD20D
-:1080600058F7CBF6FC202E5D18EB6EE46961BA116F
-:10807000E27734ACFBC3D9E43F2A93B4D8F5F78751
-:1080800083B42F5FE8FAE77B843E7481FC3E0A8963
-:108090000DE3443AD713BB6CEE35A81727036C28C1
-:1080A0006FADFA4572EB0BFF2D79E3E55B682B9022
-:1080B0008EBEAFE86371BF1F20F2239B64719E7474
-:1080C0009293F4817B64F996E87BE4AFF0703972A7
-:1080D0008587FB557E02FB26EE9383135990F64F5E
-:1080E00071BE9CA1430AE6EB4D65E2FCF963AB2649
-:1080F0004FC078664781968C2205EADF88C8FD9BD1
-:108100001C5A23C60346295C8E837C9FE6198DFB8F
-:10811000CE721BD77F8236C4F360270B7A8B68DF61
-:10812000A3B866324B939614A2E9D5B3BF685F003B
-:10813000311CAC1A9E8476D0CB383406699D09B4C4
-:10814000FFDF68C8BDCA6124F7CEB87BEEB5A0F3E7
-:108150008E67E6E5D2F3E33703D701FF1CB79BED4B
-:10816000A2FEFC53959BEFF7A0FFFF780133E519C2
-:10817000547BB81D55ED5178BC3CF49774444BD7F3
-:10818000FCCF2E41A06BA5F65528A2576FBCBD822F
-:10819000F27677CD08A2FFCFF03B1BFDD4B64E643C
-:1081A0003DF707433F37BCC1FD5F377C66F6E7DE2E
-:1081B000E9E179D7778AF1AE87C20778BB1EEFF481
-:1081C000C6F2850953901FE0795882FAB7DB40F573
-:1081D00003BA9F11C8B6213CBF67FED7764B98AF54
-:1081E000ADD1F7D7B10A1BC2F5FACD8B3DD8AEA7FA
-:1081F0003FA39FC178A613F6E9E4A02D1DE8A7FBD5
-:108200001B12EDEB309E139F57CC1EBC12B70E63B2
-:10821000BCD759E0F46BB0DE33999FFA35FA672C7E
-:10822000C1240777542EFA536A0ECA3F99FC1F4B9C
-:10823000F63A48FE75559DDBFE20BCBF6570C7450C
-:10824000A85FBC59F5D92588971B372A4C83F50FB1
-:108250002504EEF344E1EDF8BC8F3CF81EF484C72E
-:108260001FC44DFE69079DF37AB3EAE94BA2F5EA14
-:108270004D9E893FF6E03E39E6FCE23D654F0D2319
-:108280007BDBA0AFDB047D2D797228E9834B3CE6D4
-:108290007B53963C9E4BE7894A2516D78EC47B3F7D
-:1082A000302F7D07D0159E23DCF729CF1FDF7924DF
-:1082B000A598CEA3B2C07684CF68BFF3E59B865362
-:1082C0005EE7B1B4F3BB1719E00BA27EC5389C2F53
-:1082D00009FE98D59A5A2CF4BBE7106F37FDFAC9FE
-:1082E000D37F40FCEC7DFAF13BB14DC9F9E18389C4
-:1082F0007DCC2FF000FB18D93F5D2CC1EF8863FFC8
-:108300003C2BF4AFEFCB3AD925E7E40A91BFCEED91
-:108310001045F667601E774BAB928878F3A2C16276
-:10832000C817D009BD78FFA2B83FDD09F6D9702182
-:108330007FDA3D1F4F69E27108935E5772A8CAA4A5
-:10834000CF55C03F94F7976F0A34E23D8DBDEA7573
-:108350006199ECE12FABDFBDF325E57DA787F37FC6
-:108360004B0197DF2DE18410B71B5831EA7BCFE03A
-:108370005CE0FDB464BE2FD8A5CE0227FC7EC6F318
-:10838000C9AA3559B0DC791C1F58C7BFD3C3DA3826
-:108390009DF6E87F872EE57F674E9C032E11E7A2AE
-:1083A00063EC49E02BBEC92698F4C7F0E1BFD13990
-:1083B00097ED29DAEFC6A33E0F7A0AF2BD4BEDB076
-:1083C00027C799DF2F517E027D8FF572FBC4B987D5
-:1083D000C7E19C9A4EF79EB97CBE51682F19ED4FAC
-:1083E00089FD66F1E13787D8619D4ECB47BC1847C0
-:1083F000A8DEBDC38B66F2658981242FC64B8EBF74
-:108400005AEAA37CABCD43D0AE6D09F3F8C408950E
-:1084100005D538F735D76E2CA64BBF6B36A652392B
-:108420000CFD09F0A836CCE7D9B9A731259EBD5D72
-:10843000FB1F7B07E1BA3D3D809F971AD15ABC10C4
-:10844000E51FC2620339F7D4A7C3A9BF4BBCD93417
-:108450003F185FC5E7209164BCEFE86961AF757EA6
-:10846000AA503BA3DF117B262A3E58CBC270F301F2
-:10847000B20F5B1D1AAEB36B0BBF0FCED5EA22B99C
-:1084800057BB6F2AB7E39279DC737B42F71FC5397C
-:1084900036FABB042E5F334B81FEB7DBF9FE380C96
-:1084A0001860873BF2DC18CFD5FA634A6A77E6F1A9
-:1084B0007BF55C6A33FB863B1AEF1EC2FB542FA789
-:1084C000ABED096119F376BA81261F23B822703209
-:1084D0001AD7807318E9F3DBEDDDEFE2F94B3A5F71
-:1084E000A7211C1C4ED63A5443BDC2E5E3F15B976D
-:1084F0004FF307A558B86A47829E0BFC764F038B53
-:10850000FC7D04CC634B88D49DC013DB739890072B
-:10851000C3564FCE8AAE83401A13F97EF63DC35739
-:10852000374D203B27A8A05D0FA52705E7C9F737E2
-:10853000BCBF604011C703FA89139DFC7D4F7B27A8
-:10854000BFB24475F376FE245FE23489F5DC676AD6
-:10855000F89DEE90C2EF5E89FEADF081911AC05297
-:10856000FDC2F344B78BE4D6074768782E31B000DC
-:10857000E9F5576FC90CEF47FAE049179D432E788C
-:108580006E33F9ABADFDAD3ED6701FE665773D2786
-:10859000699807DA65EBA6B8514DEB7B745E71EA1A
-:1085A0009E13746E4B490AD47947635EC48A32C401
-:1085B000DF58D6DC88FE3D908714A76FC9E0F2E350
-:1085C000CCD14B1E5B1185EF07BDC2BFDB1DB818B8
-:1085D000F9A655F0E73ED46FA0DC2DF4ACDDFB6FBF
-:1085E000CC8D3E87156407C81FD6C00E517EA1F101
-:1085F000BC2BA4D239B0E1AF3B6FD1A3E8AD59F0A9
-:108600007BB3182F3F29B08AF876FF9FED5E0DF3FC
-:10861000585B86A0DC6D013DACAF7CC65A0BDFF425
-:10862000E4B79CE4F771C3BA3625C13A3DFDFA9E22
-:108630004BF1EF8B00FC8CEEAB3AEE20B9B93B9BD3
-:10864000F3DF8AD73E198972EB93BD8B2E467C2DC2
-:10865000F3DA0C3A9F9480FCF42C233966F0632102
-:10866000F2A384F742713F4A21D239F29FBD7D1AAD
-:10867000F1DF6E7E2F04D039D13DD0B90FF58B429A
-:108680001FD03D7D3F94F8797BBBCCCF81831CCF3D
-:10869000A7FA24CA57D9DE3ED947FC2C036A8B902F
-:1086A0002FC307A89F16FADB75ACC4729FEB294C49
-:1086B000D21810918F7FF3703E6D29D092FC309FBD
-:1086C000444531F141D43EC9EB621F957F74D3EA32
-:1086D0000DF8F7C3DAC5BE20F4AE7D42CF65C7B84A
-:1086E000BC5F2AF6B225BF19F7ED6D30DF252F29C3
-:1086F0005CFE0B3A3920F4E043F51954C7FD428380
-:10870000751A0D25DE0754AAD7E19F2F6163CA9B16
-:108710000F6239AEA2A50C8F4C4D98D57E909F610B
-:10872000D38723FDED3A70F570CADF3DEE6098A265
-:10873000B8EB6FDD7F7C0AF351F701FEE3EC4BE809
-:108740009F6514BFA9207AEC8D6EBAA48E6BC6FB10
-:10875000410FBCA77AAA0A1B7D0D1206E0E3F57B48
-:10876000AA56E3BD803725E9C7911E97FB02C79142
-:108770008FBA5EF95B3ACAF4DD47FFEC4579BFCBAF
-:10878000AE0F473ADB9503F6401CFA3C2CE8A7A451
-:1087900097BC8ACFBCDC5EBA24C8D621FDD4EC528B
-:1087A000E8EF169CDEA5E8780EFB5D3D908E7ACE54
-:1087B0004916BC7E3CEEEFC2AE9DCFD1CEE6A3DE25
-:1087C0003292EECB30D9994C592ED33DEFAD12F900
-:1087D000272A2D7A48356B5E3518F78DD6CD769CD5
-:1087E00047D516F3F7D5A8BF8CC4B26F7BF533AF6E
-:1087F000D05F72592EEA2F403FE49FE87E4DF13F53
-:10880000C628BFA70DF37B9E96397E405E121F1AC5
-:108810007ACC569F7E1AF5CAD3824EB70B7BB47BB7
-:10882000BB44F9FDC3B6F2BCEB7127B5CD8CCF9F2D
-:10883000F2C22A851C1CA7F2F8C5B8A3B9140F1DF3
-:10884000A333F2872C68954288C74A43AF13E729C0
-:1088500060DB25BD6E2C0B35E2FD720BB74A740E42
-:1088600063D156B3FFBE7AE32B87D13C5CDC62391F
-:108870001F2FF0628D6FECC05FE2C4372E4E12FEE8
-:108880009C216C88E9BC55DBF99DB7FAAB387FFDBC
-:10889000AAE8DF68372189D34D8D986F754809891B
-:1088A000BF4FE9C6FCDB5B057DDC2AE8A39685EDBE
-:1088B00098BFBF78039F2F5B6F33DD5BBC60D7ED44
-:1088C000741EC14A4795DB78DC0D1048F19DCA4DF6
-:1088D000E6F755021F55167CD404240B5C5CDF8E32
-:1088E00085ABE57A5CDFC5DB6CF4F739AC709D6570
-:1088F000B3298FE81F0D9F759DAE33D6E95276A937
-:10890000699DCAFBBE9F2062DF98F5DF670F5F4A53
-:10891000F92E67DA72C87F60D087B59F29427F9EA3
-:10892000BA91EB99A7F794258E40BBE888EA97A007
-:108930009FE2973EF6E2798FA2BD0AC3B860576BFB
-:10894000F13A3CA7BDB32DEF5ABC8FA2E82595F6AE
-:108950008DE2978AE85E90A2978A1273298F424B24
-:10896000457C403FB4EF761DC9FB7D21CACFB6C917
-:108970002588E615478A12513FD8C9B83F427AA9DF
-:1089800024B5236A1F599CC4FD03AB32DEB907F539
-:10899000F7A9CFDAE8BCC9545BF7CB987FB0B34DE9
-:1089A000F5AF807AF54B731BF09E8AEA27253FAA24
-:1089B000D987DB97A47D07E9ACD5E67310BCDF3D12
-:1089C00080EF83DB247F3EB4AFDD7BD5F0ED98E70D
-:1089D000BDB9D81F7D2EBB2859BB1FF32A5966226B
-:1089E000D9DF532FB2D17E7A6A50E2CFE83E167DAE
-:1089F000F31494B3A79EDF69A77383DB2596011355
-:108A0000399C71F019BADFE397AF50BE42D9AE5727
-:108A1000283FA137797F3AA4B030D9DDCD742FCC6F
-:108A2000E2CD46BD83CE415408BDA966CB09AA5705
-:108A3000A1FE0FE3556D52421AFC7A70EFAF28BFCA
-:108A4000A1661BCF6F80F7247FAA307EAA45E87C01
-:108A50002EE3743057C89F458CDF33B4A8999FA389
-:108A600033EE4532E87CFEB639948716936F86F66E
-:108A700025C5219A89BE63EF1BE2F46DBD77C84A14
-:108A8000DF2D067D0F63C390BE3F99C8F3C33E79C7
-:108A90002521B110E6F3C98B0AE5DDF741E7B49F64
-:108AA0001E11FBFF99B04CFB93D1AE73CF47B48F2F
-:108AB000D41E3963477D754AEB87B40ED35BF74FFD
-:108AC000463C7F8B05AA116FDF6A4DF4219F4FEF63
-:108AD000E0726B5AAB23847EEA6FB196265CDFAE00
-:108AE0007D3F6F4A417A7982D38B21CF160A7C2E43
-:108AF00014F85CA8F2FB9EAA0AF73F88F9D0D318B5
-:108B00009737D35A84BCD964C66F97AD4525BA1937
-:108B100021B1E6ECD8FD6E11EBA0738F5D99C3E92E
-:108B2000EF4906C15E453DAC7A9B350ECEEDFA1A93
-:108B3000CB7E7A30C9F6A5EEC178C7B22ED3BBF989
-:108B40007E360DE809E3216DE18642947B067EAC1A
-:108B5000EBD2A6E526F575DEF965A1B71BF56F8B9F
-:108B60007B265A7CCDEE683BBCDCC7F5F0AAB14A47
-:108B700010D7B5C75EC93B38529323F60AD8299F50
-:108B8000250DE076CB28E8FA852C85A5A545EC9542
-:108B9000D519F74F2F4AC3FB23B8BCE81C03FD616E
-:108BA000BE80CA484ED56E7384D0CEF81F84BFB83D
-:108BB000BB008000000000001F8B080000000000C8
-:108BC000000B8D576D6C53E7153EF7C31F8913FBE0
-:108BD0009A78662C34BB31F9202584DB109A40D773
-:108BE000F626A51D83141C58296AABE2B65BD90A88
-:108BF0004E5085281295B889A9D6956942DA7E54D7
-:108C0000EA56DD226D621BAB4C096A9892C8A1A19D
-:108C100025E990A0401BD0D659FC60EB9490C0345D
-:108C2000D24D95D873DE7B8D1D12B43A528EDFAFD4
-:108C3000F39EF39CE77DDED75D7DFFF29AF544DF7E
-:108C4000EDBFEECDC2C6FBA54709B63A94F069DF89
-:108C500020EA20F2449A60FB242343B0ABAF7B139D
-:108C6000254423558B4209CCBBA1EAF335B46FF1FF
-:108C7000E7E1BCEDFA52212A23EA84D5CBF2FD9D2F
-:108C80006AD6CBF33BFB25D386ED3DF99F8ACA52CA
-:108C9000A2C981E98AE760576832FE71FFF796A89A
-:108CA000D877EA928F6295D8D8322FD0FD442F9290
-:108CB000F3D9A611ED9987F6F04BEDD4800E697FBC
-:108CC00039B5C0AF878C0CD6755E540C4B47FF0985
-:108CD0000F513351F7277F1A9E1721BAF6AE64F869
-:108CE0007467FDAB8D683F6FEF9F87F9377F27195A
-:108CF00016A6BFF84DA287D0BFED4DCF95ACDFD9FA
-:108D0000EB96F89FBEB217F39247FCFA1B687553B7
-:108D10004F39616E0FED1736493FBBAE04E1AF2FFF
-:108D2000E5655CC82E581F23DA7E78A6BF24A9F912
-:108D300036F2DBF397D68EE182F1355A69E46A00A8
-:108D40005FEAA8EE96C2F1171F90B0FFE488A2F97F
-:108D50002481DBDBDF2AC4E734C058C0FD4526216F
-:108D6000CFC973257611E6FD731FC66A89C6F7C1A0
-:108D7000B90F7E5A148187BCD2B14B06DF8F713D8B
-:108D800019FFC452A23F0CBE7F2FF30109883A6C31
-:108D90003F8C798B0BE24E23A88238119791C17ECC
-:108DA0005D9F2A06DC735C35DE483EAEE36A3668BA
-:108DB00014F0637A9FD9315C8D72492745BD64698F
-:108DC00058D8DBBC39A1C4EDFA7C1BF96C35B1FE77
-:108DD000299717A44E45E388F3590D45043FBBFB83
-:108DE0009DFACA038EC5FE9B8971419BF79F35DEB4
-:108DF00066EDE0F19B9501B218B72FAD766EEF8E60
-:108E000029F406DABB3F79A9960AF6278E13F5ED09
-:108E1000F24C4599B75DE764115FD7B91BD12AB40D
-:108E2000D7D23BAB35B4D7517A3F8F7F180BFC8834
-:108E3000796DF1BEF3F37EBE0829225EE27CE1CFBC
-:108E4000A25F3A7EDD7C7B68A3C0A1C7E5D50B217C
-:108E500059CC7F554BBCC2E770F2DC7FA3489B8E98
-:108E60005FB812E47AE5EA7DE7B9BB1D3776E0F535
-:108E7000375BF5F34F83078D23AA15429EC7C68A39
-:108E8000EC76C66560DBDFF672DD2EFB88CFC3EEC5
-:108E9000C16DB5C47E138965719CC39B833F5EC65B
-:108EA0003890D423E2B2383EC435D17731AAA33FFB
-:108EB000397031CAE3C9E32B7E6161FEF2338DEB79
-:108EC000B8FFD86955F0AFF14C93E0DFB13F37956B
-:108ED0002DE2C0C908B0DFE4881A677C92234D1FD9
-:108EE000B7635EF24C5B93C4DB9C692A63FD592E29
-:108EF000513C8D7169A44AB473F9FC5C73F09B1CFE
-:108F0000021FD02F51CCE10F55CDE0CF8EDE535E46
-:108F1000CE63479F6216F228B7EE90A60A3FBF6560
-:108F2000FE804FDD69C914FC38EAD81D7DC7447E38
-:108F3000DB3D6951EFEE231E67FC8F8E253A28D664
-:108F40005934CF623C3EE62ED461ADD75E480871FD
-:108F5000B492B6A4E7D0C39AB024D68D5E4A7C9B67
-:108F6000F932DA9AA8D5EA67CFB3A84DE443928BD9
-:108F700077AF678D3D87BF2AF6873C8265B4353E63
-:108F8000C77838ECF067AD971273C5F379EE3C11F2
-:108F90001D90C18BF3ED1E8DF94F64962C80CEAEE3
-:108FA000777576D3E31ED3BB0CE3A49D2AC2F8FAEF
-:108FB0009CDEB640CFA00B71FCB1BEC5DF8C873202
-:108FC00080B4C39CA9731B29EEA145F0B36666FF6C
-:108FD00013AC970D6C55E1E76E3AF829EBE0127C83
-:108FE000A9A11AD641524A021278F3EFD31E4D11AD
-:108FF000F1DA55AC0777E697D3990FA17F3AF4EFF2
-:1090000034F48F6D77DD670D59E0313A74E9DDB0E6
-:10901000D0CF228A3101BF8277E49DD4DCBDEFF04E
-:10902000D77DFB7C7E7F06DF72F5998064A7EB67B6
-:10903000D7E786E6D421E91FF782ACD4453B5F979A
-:109040009147BDE2F0CFE74998E5C8C3D3D79A2945
-:10905000673DAD838A22BF8947259B751E7156F8EF
-:109060000A747E628124C6776F966C0B5F87EA3E36
-:1090700013F7763273D6CB7CAAE97DEE35716E2D6F
-:10908000BA40D17C1D37F89DFBF276FD72F9F2A053
-:10909000CEF981CF428F23C2F27CBE1FD7BBF7E14E
-:1090A000869699F5ABA5B38F95238E274DC9B0E76A
-:1090B000AAFB96FB4EB1DC7DDDBA2F09272261E0C9
-:1090C0003179F6C6E6A5F0375AF7F70ABE473BEF07
-:1090D000C2DF0A97DF5D81600385A02EB57A2A0B77
-:1090E0003CDE2B4DDC13669D90BF0ADE4BBC3EFB85
-:1090F000F6CB12D78304DE773B2F55AEBFAAB0E67E
-:10910000E874849633AF7EAF69CEB9F5D80B590FAA
-:10911000A81E8F9995FF5F77BB4F7CD4C075B93679
-:1091200034D2E02DA8DFF8CB38F77C8F0C7C10D53B
-:109130004B0AF925BBFC528595A48DEEFD38936F43
-:10914000E3CC37AEF7D10FD63FCD3CE9DD1491F437
-:1091500082FBF3F8F9607581DF897E45CC27355BAA
-:10916000F34469619CAF893827D28E3FA26CCDA6AB
-:10917000A585E32997B759C1DB9F2CDE19E7739CBE
-:10918000E3AD4A0E6F3BFB3A48DC476EDE692FBE0B
-:10919000202E6BD067FF06E3939EA98A70C1B9F8B1
-:1091A000A18B737346127C5C4996C27E9BE1F119D8
-:1091B0006EAB9451611FA08CE8275A48CCE3FB5D4D
-:1091C0001E37AB9921A941CCB354F072159D15F30C
-:1091D0001EA229614D82C0C3B691216C8B3FB38E14
-:1091E000E5A33E9D56984F99A81ABE0A3EB294CC6C
-:1091F00055BF7CFE2A5DCDF11393F1B8D91A9F4378
-:10920000AF0FBAE7DCE0B71AD77982EC43E87A907F
-:10921000B20A6FF2804A6B14E4F3A04AFE62C47B88
-:10922000745816E77730ABDBAC5F4699BBEE0BACFE
-:1092300043BBD974CE295F35CF34E6F3BD138755D0
-:10924000F017E2792ABDEE113866C47E0F73E0C8CC
-:10925000BB957495DBA970A5C3679A7A96F779A434
-:10926000DF27DE39B2DF1278FC34ECD433003C83E4
-:10927000F0B3EAA04463D8D758E4E49BF3BF0AAF45
-:10928000BE5023CF77EE31B4690CFD01BFB38E68B9
-:10929000B5C6784999A87C2BF0F5719D8C92883BD6
-:1092A000F8C2D4B5BDE2DDE6D30E2124A3FFA3317D
-:1092B00009EF69C934690FC7E32FC9F0FB1AEC182D
-:1092C0002F7C57FF3AFCFC5B7CDE255D13785182D6
-:1092D000747E67CCA75F697C6FC83CAFCC81EF1F01
-:1092E000C0EF4957EF2E173BBA71D8DEA8CBA8C7FD
-:1092F0009688DFE07A34FA2B9613FC6E284D08BF6F
-:1093000097A523D5C2896AAF60BF399E07C86C6133
-:109310009C25B75E7BFC8EBFE922C7F299643E07AD
-:1093200020E77EC47500E7C28FB6D5E6D4DBFABC71
-:10933000C84E61BF69392EC8F88A62F805DF6389B3
-:10934000B16658B5CDD47796F0931D7904F279A41F
-:10935000781FDCC7F4033C1041865D9A934FAA4402
-:109360005ECCBF9752546CE07144BB4A1D9EEDFA2F
-:109370006B914D95B3E33BE94B9CE4FCA665636CB4
-:1093800054DCA33B9B59EF18A7EFE47092F3386DC0
-:10939000B163A9AC2E7019619DBECF67DF93C1BACE
-:1093A000A77C7635C79FC303051224D55C9C73F850
-:1093B000685C3FE6B189FAE5EA1FCBE374A0D8C147
-:1093C000073FDF1C1C74D471E9ECFCFF0753B7A7FF
-:1093D000EBB00E00000000000000000000000000E4
-:1093E0001F8B080000000000000B7BCBC7C0F0A360
-:1093F0001E81FDD0F8E8B89D17BF3CA9588601C171
-:10940000CEE7626008E160600805E2FD407C00880C
-:10941000E53919182280381288A703F93380B8007B
-:1094200088D3816A9B99191876B131301C04E213F4
-:10943000407C9E8D74FB3F88333054C820F8C78031
-:10944000EC2372D4F5E3281EBC38CF0095BF4E1331
-:1094500095BF4D9B81E13D929AF59AA499AF6CC856
-:10946000C0A002C4003A4CE95968030000000000A3
-:1094700000000000000000001F8B0800000000003A
-:10948000000BED7D0B7854D5B9E8DA8FD9F39EEC5B
-:10949000494218421E3B2140800487102250B0935D
-:1094A00014142DB5113D2D7ABC3A8447906740AB1A
-:1094B000E9114F3624840001068A3572224E103499
-:1094C0005AA841F1D1536C878716ADED8DD656DB86
-:1094D000FA88A8A0A89C5445A7E7D472D7FFAFB5D7
-:1094E00093BD273301DBDE73EFF7DD9B7E75F1EF74
-:1094F000F5FED7FF5AFFFAD71A45B411F9EB849C51
-:10950000873F9AE68A849021FD2921B2D6E3809490
-:10951000E8E7475860725EBA18F82FA3ADB0CEDB0B
-:10952000FD1742B208F91ECFA37F21806770C018D3
-:109530008F9192A04262C5FDEDCC200CD644819C57
-:1095400017E0AB35DFE8A7DEE11B4FD208F9C2C94F
-:1095500052BD8A6695D3F44D67B4B1801087101E52
-:10956000C1C65377497529A69742DA2890B95D9EFE
-:1095700024E320EB08994493FDC34452D13FFEC439
-:109580007246DAD44048CCDE0FCB3209256BB78265
-:109590008E1FDA7D5F0857E0783C44067C281C1F4C
-:1095A00036122484CEEB88FFF2C03C3AFED6694ADC
-:1095B000D00E193B874165E233F038371F610787CA
-:1095C0002B89C6F11D6B1941EB398322D944A1A621
-:1095D000822A07292164EB94CF03613A1EA71C213C
-:1095E0002AA49EE4E3BB9A88BC9DBBC8C5CC3B7152
-:1095F0003D6458A349088A302F63BCDB6C745C99C6
-:10960000743D2689641F85B794CF4983F118F3729E
-:10961000A4E8A719F03A9A90CD0D0E4C9B26CF499D
-:1096200023508FF4CE85F5DD3A254BDC24F4973FAB
-:1096300032E539470F9D6F23AFD7AA1D7540796377
-:109640009D13F1B695E32744041CF7E652D7DC6876
-:10965000C9C07184880FF3B73A692598879744F792
-:1096600015400B3D6DF329EC9BAC966DD206D2CB29
-:109670008C523918A3E3F4783C413BCDF704587D74
-:10968000C7EB4254C3FA21CF305ADE65ACFF64B158
-:109690001F9FF4FF3E524D08E5475F4EEF6BD08FA2
-:1096A000FD757B3044BFBBFFFCE96BF369BBE46D28
-:1096B00021B80FFA25AB2CEB45F632BCDA54FA6F21
-:1096C0009AEF9AB668364CC1FDE5E3D580B78D4573
-:1096D000AB5D6B61AD8AD9FAA9F47FE70B69FB9AA0
-:1096E00062E9DF665EDF02204D2BEC1E39E7DB23EB
-:1096F000B4D4F4E1EEF19158062D2CDD88EB9DAA4F
-:109700005CFDEB132E3B6EEAB78D78334FB9E93F22
-:109710002E2597229F5FA0FE170DC1CB8EDB70DE3A
-:10972000A259DEA42ABF9ED3471F9D1550FA28C117
-:10973000F50C5C53DAFFFD25A00BE007BD12E51820
-:10974000F2229D6FF374D22BD1F5681AA968EB2829
-:109750001EECAA12137CACCF5EA02FF807AD6A2FC7
-:109760006AEE16C603F03D8B1C6C19FAAFC1D82007
-:10977000E34B5C87AF8ABF18E06F5C3FFEECA43A16
-:109780002D06EB5D1D40FC78F938364CBF5D8BD162
-:10979000F96CC8FE61E86D62C2E3A58CCFFAC6938E
-:1097A0001325E6FE0DFEBA4408BD08F89194E06B5F
-:1097B000618A0F325509EE4B322F596072A51FCFC7
-:1097C0000E99187802FA3DAC07AEF1E290AA1D2678
-:1097D0003CDB03CFFD19F0276792987B3C7E6F92AC
-:1097E000D3A9FCCA24BA3B0D5B9101FE332940FE8C
-:1097F000A4F9339432900B9707C3B49F661BEF4FC5
-:109800005D6B59D73FF375EDCFD703FF64C9B761DF
-:109810007BCD5E2E37D4461CDF80FA7E563F71BE6C
-:109820007F02393A09CAA99C7E1A03A06F1CC39A09
-:10983000671D01BC8FAEEB9A0F735409E2C190FF14
-:109840005401122847F5C39FA19E43AB46BCDB736E
-:1098500042248C78B3EAD3947239418F0EA02795B5
-:10986000C2461B85F0DF1C15F98D24EA6F9E8672B7
-:109870002F4A0F3626F0156D2AA99E291598BC256A
-:109880007A26CE5F36E880DB0736031D3B193FABF7
-:10989000BC5F05C643E5A19344B17137A57480BD93
-:1098A000A40EE173A1B298007423938D20E7EC21FC
-:1098B00091E80503FBDFCAF549AA796C9D925C0F1C
-:1098C000E40A4C0F489E3ABE1E37AAC067821E2685
-:1098D000E781DF4884EBBF20AEF786867AF20E9DE3
-:1098E0008CEBE89544A3F423E7D48542B49E04BCF2
-:1098F000484534F194B3540E6A66FAEA5B47B216EF
-:10990000DBB351B4C03C6D1EC73C321E52F51A4C3D
-:109910008BC72E04FEB0A55D5E0FA61CA59B4A0159
-:10992000FA7724A72BE2A14C3A0561AD3A697F7C16
-:10993000BD79B994F4D5471FC67C35A5DA3B906E46
-:109940005CE5AA00AC40C16E18CF503E9AA1E1E69A
-:1099500055E27858B7C8AC51747D86F6CC43FDE427
-:109960007DFDCA0F605EEB4BCA4E8009971654AF5F
-:10997000B99CAEA7AB980880EF8DD0D85468E1842D
-:109980005E097A1DFE994DC8FF109E09E91E463EEC
-:10999000567B53D464439E8883DA2FC279FBC0FA86
-:1099A00029E53331F10FEAF1D517672FDDC8FAD376
-:1099B000E9FF80EFFC09FA342D646A97007EACFD64
-:1099C0006C00BA41FCAEFA6FE94F253B1C1AD81D5A
-:1099D00045A21AA57DA711D54F653171CD9009E833
-:1099E0001335A75787E5BDD0BAAC276416CA51CA4C
-:1099F000B7663A6FE7722050D354D04CDB3D57EE38
-:109A000009821C184AC56646FAC0F96C4EB0B337D5
-:109A100097EC41F9D848E9A810ECFD1211EDA18DA1
-:109A2000458FA9667DF53343DE0CA00FA2C915282A
-:109A30003A08A1F8918AC49073FCDF4F1F8976D24F
-:109A4000C5D287FB46EB7A7CD5F5FA659FFD7D7123
-:109A5000F4F1F7F667AC6B2AB945D715EDEF166D43
-:109A6000CEA0F6CBC075DD81EBEA2A22A16472B8E4
-:109A70005B10ACFAC99C9AF507B9D5B25EB64BBF7C
-:109A800033F78141F0619B6B9DAFD1AEB35ED2DE07
-:109A9000053B5656511F19FB878DDA0E1DECF973E5
-:109AA0003984D97B91553101ECA022827610342083
-:109AB00052D8A985A29B0446FFB02E867D63A3E6FB
-:109AC00098B93F497559FB9FAB0BE6F13BEB151C71
-:109AD0008703FA03BEF4D00669BB520E8939D1FE62
-:109AE00064EB075DB17DFC9D17450706BD025A1961
-:109AF000BD5AEB3507CA48B2F51BD0DF75D6F1A6C3
-:109B0000944B89F53CB276CA648FA4AE2793532652
-:109B1000BB66789FFF4237ECB9A7056A173606BEC9
-:109B2000A3E3B8E13F54BFB6404AF59934AC8A8408
-:109B300035D0931AE3132D9DE9DF4EC1B20F37BE26
-:109B4000A71E07EB2FBE90D222C83559B3D8CB89B8
-:109B5000696343E06B32254A77FD0353E589D48876
-:109B60005D1B9A5B4DCB6F6CE89C0ADF8D723345B1
-:109B700063FF4DD5A6C93E96092DE7C0AFE4FC446E
-:109B8000F8A812CDA4DF1DA40BF3E957BE7E04D7BD
-:109B900001ED2ADA649DA861BB0A791ACB414350D2
-:109BA0008E4AF1A972316B0EE0CDB65008C7254739
-:109BB0001CAB29DF6D767258E3B09FC32A870B3840
-:109BC0004CF504C06E85C23475DA222AC22E0E17F7
-:109BD00070389DC37E0E177258D881F06685B5B770
-:109BE000498EB2F65D1CD6389CCE6195C3851C2685
-:109BF0007B58FF7606BB6C51D6BE9BC3051CCEE0DE
-:109C0000B09FC323382CEC4138D5FAB98A3A199E53
-:109C1000FAE442573F8CCA83E3B50F8E25C08C5EB1
-:109C200032044687F16F19741344F9483C79C86FC0
-:109C3000E31C6CBD1BF797A15F82703F8AE9FB09AB
-:109C4000D0C7E73AC5E060FCF5432E4F77829D4BC5
-:109C5000D3ED0D2AA6DB1A0268F76E69D0B85FA5AE
-:109C600018BF6F6C0822BCA16132A6EB1B42F8BD85
-:109C7000B16116C29D0DD5983ED83017D3BD0D6188
-:109C80004CF7342CC672D1863A8477537B17D2F6C0
-:109C9000061DD35D0D2D98DFD61041F891FD65CFDF
-:109CA00017513D7D2E2CA29E4F35FEA173AD7E90A7
-:109CB00021D556B9983E23DD92AF4ECBB6FA4DCAA8
-:109CC0000B2DB0A764AC0576159559DA73E44CB545
-:109CD000E42B99551658F65C6581C744E758E0D1E6
-:109CE0006D3758DA1B19A9B1E48F685962C92FD0B2
-:109CF000575BE0FCFA7FB194CFAD5B67C9DFE60C40
-:109D00003F235279357CF1264BB961E11DD67DDDCB
-:109D1000ECCC8B925BE4333DCBECCF4894F7521EF6
-:109D20000985506F31FDD208740B7EAF5C12DD27C0
-:109D300080FFEA8A13B0EFB01731BD33607F99D04E
-:109D40009EE279F0359DF653E93B11E831F11909AE
-:109D500098EA51B97F5264FBE64D77B17D75EB5DB2
-:109D6000C9F7D728D9E93C5ABF4CEEBFED11256E93
-:109D700007E9967D4AEB5D0296FF7BDB37F213DB4A
-:109D8000EDEF8FD25C85D90E891A7E51A267F5EF6F
-:109D9000776D3DFEF9B0EF31F6B912E7F3CAB9C1FC
-:109DA000B79B289FAC5709FA0DD77BAA08D815E7AF
-:109DB00054C6F7646F1EEEC78DF203C767B22B500F
-:109DC000FEB8AC7E5ACF1C942FEB3307B7CB94B8B8
-:109DD00084FE3B292E9018D53B8A5C3DAB808E4B90
-:109DE00079450AAE25A87F92EEEF09D981789012C5
-:109DF000EC9BA60509726F462ECEDB66C8B7CC2A4F
-:109E0000FCDEA40E3E2E3B8C0BC6C3C7658BBB315C
-:109E100095E24E1CEF947806C293E37E4C2F8D0F93
-:109E2000C7B4223E0CD349F1119896C70B309D1848
-:109E30001F87F5CAE263309D109F88DF83F1099880
-:109E40005E12FF1A7E1F1F9F826969FC1BF8BD24EA
-:109E50005E89E9B8F837F1FBD8F895988E895F8B61
-:109E6000DF8BE3D7603A3AFECF988E8A5F8FE9C8DE
-:109E7000F87C4C8BE2F3301D115F8AF50AE3B76082
-:109E80005A10BF15BF6BF15598E6C7EFC4342FFECB
-:109E90007D4C73E38D98E6C4D7623A3CBE19EB65FE
-:109EA000C737623A2CFE03FC1E886FC7342B7E2F07
-:109EB000A6FEF80398AFC63B304D8BFF08BFFBE210
-:109EC0000F63EA8D3F8EDF3DF18398BAE33FC5EF24
-:109ED000AEF84F3075C68FE17747FC08A6175A27B2
-:109EE00025C72AC7A54C97059EFC6EBA853E2A5EFB
-:109EF000B7CAF1F2570A2DF9652F5AE578F078992B
-:109F0000051E7F78AAA57CC9A12A0B3C76BF558E79
-:109F100017EFB5CAF151ED56395EB4D32AC70B5BC2
-:109F2000AD725C6BB2CAF1BC3556399E739B558ECF
-:109F3000672FB3CAEFC002ABFCCE22BBACFBEF195C
-:109F40007BAC7A6DDA2396F63CE58F25EC57A22898
-:109F5000675C25FF6EA9E7283A9A209F7526A7120D
-:109F6000FCE5801299F2F71DC415349FAB18693ACD
-:109F7000970719C07734CDE47C3704F88EA6E9DF63
-:109F80005C86E74C5F7CABE5174DB4B1F4E184F936
-:109F900005F44855887E6F1EC661FA45003897A0C3
-:109FA0009F80E8672AC12FD65CC0E07F934E55EAB8
-:109FB000CC7FCBF2C95996EF64F0238DBF5A0BF9D1
-:109FC000E969D1EC204D1FB12597D38F49ECBCED49
-:109FD000AC18EA90E87CFFA3B2E776F0A3FDD51EAB
-:109FE000DE27D1EFCB1CE17C704D7F6C0B3F2483CF
-:109FF0005C24A107E17B1A093D24A1BCB6FA451BEC
-:10A00000C1E0A6ED7C2656EF87FC8CAB17A35FCA98
-:10A010009877B377F0F14425A6979AFD04F78DFA67
-:10A0200011859F2311765E0329D583F7B87D21C85A
-:10A03000DF7044D963A7EB60CBC99A4FC6B36216F1
-:10A04000FD116B5E057AD8017A680448F92E4C3D03
-:10A05000A49B9D1B915E4C55A20A901AF3EF9B772F
-:10A060002E9B37C5C72F24DC1FD461F975EEAB27B3
-:10A07000C37C283E4EC0778A8FE7A521A9F141E035
-:10A0800064818E3FCFA0A2FD82C5FFF8BE10FE8D79
-:10A0900064F263E6D507713F794052111F06FEE86E
-:10A0A000DF6DE9863F86D5FB23F69BD09ECCCFC5DE
-:10A0B0007E23F1FEB93E34E8384324E1647ADD388A
-:10A0C000F7219D795FC99F2D28CC2E49ECC72657D3
-:10A0D000E379EA00B99799B0AFCF0CC3A250FD491C
-:10A0E000F56592714D57B87F4ACEBFA8F32BC35F79
-:10A0F00042F6E77DA5F32EA004286F901C399E87B9
-:10A100007090EBDF02B0EBA83D72EC8DA762CBA99B
-:10A110001CD85044752DFA2DACF6DC869888E7EBF8
-:10A12000057E2A706863F5DC0E90B93D68F42B3724
-:10A1300059FD299B6D7C7F7BD88AC7024AD0FF4E90
-:10A14000B7DCC493CFC6C7CF2D8D76F6F48DDF3A3A
-:10A150008E074AA83964C2676129251D18478C8D6E
-:10A1600023B17FC2CF170CFE913DDC6FA2E663BB2B
-:10A1700046BF89FD1069369E27A5C2EF807EBEE2EC
-:10A18000795D859CFCBC93AE0FE2696C8AF535CE97
-:10A19000EB0CF8D81BB578FEDDDC59837654738060
-:10A1A0009FB3FF85B60AED1092D45EDCCBF1BB897C
-:10A1B000EF17F746AA1C582F33DFB24E45DB67B8BE
-:10A1C000000F4D6A553AA4FB76B27223EFBECE154E
-:10A1D00066765B3AA49B8AD977D798BD0E567E8F58
-:10A1E0000AE9E612F6DD5D7AC8C1CA333F2DA9A798
-:10A1F0007FA673A022B55A14CA41FF92904C619772
-:10A200001A25E04776AB5D981AE3CE8E88E2185A9D
-:10A2100025BB33947E25F8DDEA4870241BAA03D6BB
-:10A2200039CA972FC7C8AFA7F9B4BD313B8F564283
-:10A230003DE7CEBD95576AFDE577F3FEC774465BF3
-:10A240000AA17C8EB5BD76DE9EB3B3EB04F89B29E4
-:10A250008EB13D237F17CFB7437E26521BD6974B37
-:10A26000DE8DC1798681E740B1D8087022BF1BED31
-:10A27000B4F171043BA3912AE867AE751C3F34C862
-:10A28000B29384A21E933CE0F9119EBF01F6FDB487
-:10A290003FB993F9518DFCADC63823AC7E23F70B43
-:10A2A00018781DC3E591413FA9E898E8A265FF46EB
-:10A2B000EA5D56B8CE64DF01BC38DB9A1F2EB4C20B
-:10A2C00073C75AE15099159E3CD5D2DE177D7E9416
-:10A2D000A813FD25DC8F62F85E76A935B8CFE9F7C3
-:10A2E000D3455C588EEF3B7278B987EB98BFA5D108
-:10A2F000C3F985FB5D9C5C2E3617B17D499F5DC11E
-:10A30000F1DDC5FD1A8F36B4B1F8940BD8C3EDBC9E
-:10A31000DE2E7EFED8C6FD323F04FCDB61BD985FB9
-:10A3200026C2FD325BC12F43D356F0CBD8813F9973
-:10A330005FA605FC32343DC0FD323F02BF0C851FD5
-:10A3400006BF0C4D1FE27E997DDC2FF300F86528D7
-:10A350007C7042F75CF0B775807F86C2F773FF8C24
-:10A360009FCBE58333A3D9E00F7B6466F27DB1DF39
-:10A37000C6FCEEB960A850FAB884048FA1BF9B8ACE
-:10A3800061F0774FAC0B362A9960B732BC4D0C07A1
-:10A390001B6DE560B73238DFC6F428E80BD01FE448
-:10A3A00030F327503ECB047C6FE1745976222CCCDD
-:10A3B000A3E3F8A3CCF5A2460218B7C0F902F24114
-:10A3C0009EBC21845E972741BB04C795BFB7AE0AE8
-:10A3D000C468F1D3D5475DB4DCA8AEE03A707D1611
-:10A3E00095A8E05920CE224D84F5395819443FDA1A
-:10A3F00096DF4AC13DD06626B1D0031D1BCABD31D0
-:10A40000063CCD4A0F97C477A3FDDB5C37270DE9E7
-:10A41000492383EEC7FD21EB3E286DB2D59FD5BC05
-:10A4200097B5938A6E8ADBADF6C4A89DD67D54732A
-:10A43000D19C41FDCF45ADD6FE0B9B12EA7B06AF0A
-:10A440009F1FBF1AEDFB54F43D4EAC49B34DEA8754
-:10A450003DF1CBB07CA27D2703A150BB4D3EAE6049
-:10A4600048957C5C0D815D2B1FD7781AE4DF431C77
-:10A47000AE66B0CAE220A83D986B1B82EB9370BE1B
-:10A480001D2270FE7C109501FDBFBE705D88D2DC80
-:10A49000C17F22B8DF78435E55A55378D76C8728F3
-:10A4A0005D02F4C6E21914BE5E194A746301D0C39A
-:10A4B000C322017A78A473703E1E10E7E009A17FE1
-:10A4C000A6A0492D03F59DAADECE2671563449BBC0
-:10A4D00053395F91E324D16E9E0AF35DDF34474523
-:10A4E0003D725D10F7074463E337E45C46FAE0EB46
-:10A4F000B7ABC17ABE964D92DBA16B6C9CDF8A999B
-:10A500007C34E83FE3C1C1DBDFC0DB8F770916FF96
-:10A51000CE90EBAA2B6D99B8DF097A408E7E293157
-:10A520003FD961169F66F05363D10E179437FACF67
-:10A53000CE89C1F684341F99C2E226287E713F7805
-:10A5400084CAF11294E368F73917D785989F3C8243
-:10A55000F10DCEBAA00EED481E462FB0DFE4E57136
-:10A560003C1BF78A1872D13897D9AD869C37E8A082
-:10A5700031C0FDEB7365E667FB0B9D9FB11F81FD4D
-:10A58000A15A87E77BCD93D87C6C992C0EC4561CBE
-:10A590008BC1D959B377D15A98AFBED0D0D73CEE42
-:10A5A00082B0B82B231E0FF003E7E0056DE3518E58
-:10A5B0001878FCB610AE073EB265EA4218E7D185BE
-:10A5C000ED1B784BC4FB77B93C1D9EC20F97A6309C
-:10A5D000B99EA1A85781BCDD7284D277927DBD93CC
-:10A5E00097EB88CDD90636A2C1AF46FE0149C37E9E
-:10A5F0000CB820AEB0B8BE9875FFF1FFBA1DFFA829
-:10A60000CD1A77F7FFEDF8FFDBED789A0F7648F873
-:10A6100002763CB7F3F7F6D16F829D5E2C1FC130F6
-:10A62000BA047B3EAB7846AC0AF23BBBBAD18E9FF4
-:10A630003CB81D4F12EC77C3AE37EC77C39E37ECB6
-:10A640007532D09EE7FAEF1BEB4232C48911D47FFA
-:10A65000E39ABFB14E87FE13FC1E12157366FF45C9
-:10A660002FF0F910133F78AC76C3C5CB0719F53F2F
-:10A6700009E65AE46B46F6E0768E11EFFD45AE61D1
-:10A68000AF87D83968513131DB634D548EFBE87C9C
-:10A69000DAE7B2F329C2E578B6E197290EFB47A3C2
-:10A6A0007CB7CADDF6C5353A9EA394133C7FF4E42B
-:10A6B0007485E07C3C6B6E04ED492A7F8B1593FC1E
-:10A6C0002D68AB4039A773FB32119F20EF0265D094
-:10A6D0004F829C21C19745C8CF85B36BE087A88086
-:10A6E000FA03E234C60F226F2E325EC3889FC8A3DE
-:10A6F0007F206736C86C7CE4696BFC3951297D5436
-:10A70000F4DBCDE4FDF98239EECFB06312EB51B941
-:10A71000A026937B6F08E16F2983D047A23F8A244C
-:10A72000C8692A8844E8BF60F62CF433F5F9A564BB
-:10A73000ABDC9603463CCB7FAFFCAE55FEC6B8F310
-:10A74000AFE8B7DBC8E5F3007E4E68472CE9223D51
-:10A7500049FAF79458F1EE2AB2DAF302085B881F3F
-:10A76000CEB19E93CB9EECE4E7003C3EB366B2B123
-:10A770006CDA77FF48F9E4961336BC4762E81DC3EC
-:10A780002F7B0BC469D2F5A981B84D4ACF0B48B5D0
-:10A790000F323F2622C6837D4C5EF64D34ADD37D0D
-:10A7A0008AC2FA69B19D847B42463CE2C20883FBBF
-:10A7B000F0DF668517913959701EB168A70D38888A
-:10A7C000DC42E4933DC6F8297F6F51587C752DA972
-:10A7D0006B0639B69EC773D7A84486F8C1E54FDD2E
-:10A7E00057318FC27BB9FFF60CC5BF66B28397782D
-:10A7F000A20A9C2BBC7368E277BE46A07EB4391BCC
-:10A80000E208A9BD0A718489789FDF621DDF85C6D1
-:10A810009F385EE35E51AA71C89D4228D9FEE0319F
-:10A82000C51AEF76A1FB4EBF53347EDE6CBDEF74CC
-:10A83000A17A7F543492EC9ED485EAF5FC8DFDBD5F
-:10A8400097A2DE72478F027260A51C9E2514F6C780
-:10A850006B29B6EAD0708A0AF9E90931385A32957B
-:10A860006BB9C8722760637111E5668983B4779606
-:10A87000F3F12FF63FA0007F7EFCC8DB57C379CDF4
-:10A88000D29F4AC441E77576BF97C470DF11554027
-:10A890007F2D392431FF9B1CABB8D6247F315296D3
-:10A8A000E27BE9A35E8CAF58F2983D3A9BD65FF20B
-:10A8B000E43BE309C5C3D975BDCF0D87FDC42302B1
-:10A8C0008B27D47BC65F4BBF2F91C9CDD549E4A060
-:10A8D000646774FED14FDC73818E84CE233761BBF5
-:10A8E0005DDFB5D94D76FF7F2A36A31C9E33E90F75
-:10A8F0000BD191021B9FF99E8411C7F9D1C3021B92
-:10A90000DFD3B6A813C6D7D9A18469B9959D7F4274
-:10A91000BAFDC6A3077C8087954F4B16F9B2B25398
-:10A920008AD9C763FAB61DCFAF421E81CA911528D6
-:10A9300062687A6839C67DAFE8DAFC27C907F5ADE9
-:10A94000FC43F1128C015E5F9582B3017EFC211FF6
-:10A95000EC07CF74EFF3015E69BBF3144A57977DA0
-:10A9600066E233C2DA8FA70F6C8F5A380AD0D7CA83
-:10A97000AE8DACBF04FE3C03FF1836502F8CB55B88
-:10A98000EDFA73E4C50ADC877766248D93EFD30B69
-:10A990009C5F971E38B75BA7FD7EF4D887BB753ADE
-:10A9A000FE657FFD74F79D6057FECCA9829C59F926
-:10A9B000C86F7DC484F79976C6EF671F7EE8C15DD6
-:10A9C000945FCEFEDE8EFBD1B3CF9CCED3E8BCCF5E
-:10A9D0001EFC739646CBDFF6CCCCA18087DB9EF8BD
-:10A9E000C6D0C1F6E740AF51BB795DA3B8AEDAD3AC
-:10A9F000020BCA3FCCD384F53976E8581E8CF3E3BA
-:10AA0000D7EC780F7125FD565F06EBB51CE53EC00F
-:10AA10006B289E57ECDFF027697C327CEBC345B88E
-:10AA2000F34628DB0460BDAFFDF6F472486D410DBE
-:10AA3000DA23BD28B713EBAD7C85AEEB25A9D7F1A2
-:10AA40001CF98B02F85FB97F23EB37611D3F867FCE
-:10AA50004C19B88EF3ED56FD7E8E2CBB1F6DFD4359
-:10AA60001949E3A68C755CFEC43F0D6A0718F2E035
-:10AA700042F85DCCE3FF82F6D0AD76E0ABC7DC7A7E
-:10AA800080AD6F7436CD3B7BE05C1E186BEFDB7ADC
-:10AA90006F0239D9FB8C5D85FDFA92675E453E3BBE
-:10AAA000FBC44B8A86729278046A279C257D7FDDE1
-:10AAB0006037AC60B63059B9D71BB3FBFAD76945DC
-:10AAC000F49A599A0FBFBF8DDFA38CFE57448F5C59
-:10AAD000272459B703F6422697A343102FCB49B733
-:10AAE000A29658D753980CEBF8F6E54077A9D6D143
-:10AAF00098BF0AF3BFD4B49E7B19DF26965F41F955
-:10AB000013FC837DEB1A155E2549F8F46C875D868E
-:10AB100038DFB329CED9FBEEEF7E45FBEF217B8AF0
-:10AB2000FD3BC7C385F8FC42F3FBAAF8BB1B82BF01
-:10AB3000260DC4E3477F492EFF8FD999FF6C050985
-:10AB4000CFCA9606EA2F8984F4E105FDE36DEE9203
-:10AB500050AE7FD42945A16AA29C5891C24FF89269
-:10AB6000D1CFD347C6833CFBE8E84F385D32BA5FAC
-:10AB7000B1FF6D45E7FA206AD60729FC547FE4ED62
-:10AB8000AD3C9CBCBD95FBFF94B4BD3372E8BB30BB
-:10AB9000FE33DD36A2D326CE744949FDABCFDA6D44
-:10ABA000D638716FC56B69B49EE47369D075E3BA2A
-:10ABB000D0ABB09FD35FB611BC4F2B07DFB7D3FC30
-:10ABC00046AF4BDB44F1D5E85B847E48A3BDA604C9
-:10ABD0003CC9816A1DFC1C72667539B391A396FD50
-:10ABE000B04D152DE3A67A3607F4D09B134EDB60EB
-:10ABF0009E6F25D8836FC9A479286DEF2D5D08AEAF
-:10AC0000D592D1B7B5FDF01A896866FD67EF7D135F
-:10AC1000C6437EEE2470BE22FDCCA9833C59B9DB2D
-:10AC200019B5D3F91C7BE28B07016F67EFB713BB34
-:10AC3000295EBC56656D9C7EE28BDDFF45F34F437C
-:10AC400065DA7FED6E5A1EECF0FD6E0CDAFF8FC7F1
-:10AC5000D2C6132A9F6B7F7EE7D5205F6A41A6D2BA
-:10AC6000F2B58F0E45BBEED410069F3A901B85754A
-:10AC700059F6F8332B408F2CFDB19B80ABE0D813F5
-:10AC8000AFDE04F0D99F7B31BEF1ECCF4F5F067C85
-:10AC900040ED67CDACC76F31BF3340DB5D0A30CBD1
-:10ACA00017CE735907FB92A59052B9B1F4E934BCA1
-:10ACB000BF632A87F556DA7B6F0FA27F45CF1671E7
-:10ACC0008F13CB063E5CDA69ED4F73303FE84AA53F
-:10ACD00077112B1FC966FCDA8DF54A1D9C4E797ED3
-:10ACE000627DA3FC384761423BACFE0A3BA94B4660
-:10ACF000FF931D4CDF2FEDFC72B4B53D9D7F4FECF3
-:10AD0000877DFF9EC0EE9790834E8C235AA6C44643
-:10AD1000A5537E7D52218B816F97F962A3FCB4BF4E
-:10AD20009F7239B9CC4561FA3D9B8F03CA034C1C15
-:10AD30003D3F86F55DFE949300BD2FFFB917CF5FB1
-:10AD4000963FF9C5A97FA3DF3F7AC28DFE92E53F0A
-:10AD5000BF03D77BB93D7613F8517A0FDAC91E5A73
-:10AD6000FEA383CFE7811DF2912D96973EC8FE7C0E
-:10AD700079979D5F6AB0CE83EE0B8AEBE878F4EDAD
-:10AD80002CFEAC9EB8826B21AE041C0740C7AF3BC3
-:10AD9000D939213FB75DCDFD499F2CD0D270FC251C
-:10ADA000CCAFB59AFB0F567F4B1BEA378D03E243BE
-:10ADB000C94442EE50EA46839C95E2DF241A85E5B9
-:10ADC000F8084C8D7292CAFCD05226F3B7D9328360
-:10ADD000A4B604EAB17822E2B9AA8FCFFE275DE2D9
-:10ADE000D5F76A43A1BD790E664F6F7386563870EA
-:10ADF0003FE3C17BA1384F2A10F427D8BCBE10D83E
-:10AE0000BC12C7FB854DB7833CEF3FCF66E727F504
-:10AE1000B2F6AA06F33FC1E5D280F9333EFB444DBA
-:10AE2000473E33E6B1B9414579B2B12180E9868622
-:10AE300062A2615C7F106189E3C35EA21309EEC95F
-:10AE40006A6CAC764F7508FC56D026F83B254F1837
-:10AE5000E9CB1EA8C3BDBFC3C3FC94924727B51E50
-:10AE6000F487219EE0BC05F0A470586E9B8D78A5F8
-:10AE7000F5F1FB7267F86EC08B2367AC454E2999DC
-:10AE800065167800DE0CBA38F0DF8D3F82F8023F9D
-:10AE90008DC6EF4500DEE05E04C0FF07F0F70CC38F
-:10AEA000DF542AA3CCF8ABB2C029F1772FC55F6677
-:10AEB0003F5F25E2A19EC7A519FC948A7FE15E0948
-:10AEC0005C1AD8D1D086A9F13D3D855ECF7532B9E7
-:10AED000564FC2782E4654E65721993AC931F99314
-:10AEE0004840C7FB4C782F1AF23DCC8F68ACAFA41A
-:10AEF000CAA7ACF24F7B15E673C70B3611E4955425
-:10AF0000FF0079C7748E26CDAE766A88E720FA7581
-:10AF10001BB97E5DDFB79E56FED8DCA061BA85F313
-:10AF2000C936CE27DB61DDC13F1714714D5B671158
-:10AF3000D49F775398EDEF6396732B7FB02B06F178
-:10AF40000E2893344C6328BF5EB34747D27AEE1283
-:10AF500012027AF1BFF6FD28CE957405C01FEAE70C
-:10AF6000F823870BFDD7B377106C4C4F1189A511CF
-:10AF70001BEC9F12F1DB183CEA807D77AAF1640597
-:10AF8000757B1EED2FEB753BCAEFCC1BBB5EABA1F7
-:10AF9000F3F0B4BA713F991564F4E80986855AD381
-:10AFA000FA65A5B0FBEE735EE976D2F5F4401C2E8F
-:10AFB000A5C71D6D239C781E64EB0A801CDCEC6722
-:10AFC0007A469B4B7BBBB4BFDEE70E667FF9CAAD0A
-:10AFD000FC6FC863755A99858E0D799B3EC34AEF05
-:10AFE00086BCEDE993B7D5B9309E8C783BF26322ED
-:10AFF000FD37DA145DA0764A23D89260DFBD2DB00C
-:10B0000078DB817200E3513EE929D803EF05ACE318
-:10B0100071D03AE517D43BDCFF699CB71F20D52DD2
-:10B02000F07E4B0BA52302EFCC50FA2118AF538CC6
-:10B030006984D20FE393C9981AF439139C2726FF29
-:10B04000B954F49CC8EE6188A073884CF7811EF057
-:10B05000331D99E200BB50B6054F80FCEAF58A5DCE
-:10B060001097B0DE33C70171D482BF1CD7FD736F58
-:10B070004DFE60E729F01208D08DEA09929325FD74
-:10B08000F77525B58CC07EF280A71BCFFBCA9DA2A9
-:10B09000C59EDCE60C5FE534C1A5D03B5FB7AFE3EE
-:10B0A000FC93DFFBFD0EE77792A39322137F1BF146
-:10B0B000A144D349B189CFD78DBC9CC039E740FEAC
-:10B0C0004E21C7F6FD63E458637E14D7CD9628372A
-:10B0D00032A97CF760AA8B2A8CFF50D33F4F403AAD
-:10B0E0005B0AF8209E3D7DF6CBD70B078E33516E61
-:10B0F000F5EB230DFD55541FDD3319E4600A7D7413
-:10B10000E48DD1DF86F8A9779E9704B3BF6E717C7A
-:10B1100023EA83DAF814A2D1F1D6B4FD00D3456D49
-:10B120001D48F7EF47D7FB303EA685EDE7DE8FDA07
-:10B13000A25201D2ED7909FCFA84B5FF7E7B2396F9
-:10B1400023E07D31F5FB7E3BAB4FCA35B4A73FE131
-:10B1500073ACD9660FC139CDFB6DB4DE20F8AC817C
-:10B16000CD5012FB14DF0180987F52371AE49CC146
-:10B17000EF7728542E011EDEB427F5B32F77CEDCEF
-:10B180000E7CBDDC196A839478D22FEA3D8A77441D
-:10B190006AF722BEC3BE6B2C7E56E6C77C87DBC532
-:10B1A000C49122DFC7EBABC9F397B77EF8DC5D141F
-:10B1B0006A2E095713D3FE5A226C7FBDE2E94AFE7C
-:10B1C0002E081B4F12FA64F66CAB1DE5D002EE0F91
-:10B1D00032E8B59F5EC23E7E2FD4424FB7C4B7E37C
-:10B1E0007A0B9B4BEF9942F1F729A523F0CB099BF2
-:10B1F000A70F053E5ABBE96BDB6EA4ED7FF6A28478
-:10B20000DF17C79D58FE83BB82F7DC08F6FAAF6CE8
-:10B2100018DFF4D98999780EFB81CDEA47A871B17E
-:10B22000FDCD5B4E962E8A6FB6D8C78B5AE62BE0C3
-:10B230007F5C14DF8ADF17C1A10CDECFF8F078A5A0
-:10B240000CE73504CF47DFDA787AC63AD46765E889
-:10B25000C7AADD624F7A9FE42DA766913BB53DAD4D
-:10B26000D82EA1F65166166FCF243F6AE370F90419
-:10B27000D6472770DF601197237DE36BB759E4C889
-:10B2800007CEE47E92FFE89BDFD7908F06CEEF32A9
-:10B29000C65F46BF3D8CEFFAE773CF9464F3E99F36
-:10B2A000C7342CFF813F79FF591CCFA71A16931082
-:10B2B000954335765ACE03FDDFDA3C19F6D9EDFE1B
-:10B2C00074C134AFDAB6A524643EA76C9FA7D498A6
-:10B2D000DAED5F07DBB39545FDEB90E52233611DA9
-:10B2E000EE73568B2EDA5FCDE6E9E3C3B8CF66F294
-:10B2F000E41D5B300FE4EAE9B65B93F277962B61CD
-:10B300007DDAF8FA50BBB7DCB43EC6BA24D63FF5B6
-:10B3100046EDE777811FE05E66D4A4C2D780752B27
-:10B32000488EB7A08BE9975354CF86116FDA93AF4D
-:10B33000015D6F71631C676AFC8D23E1C1F097C2E8
-:10B340007EA5F6CE18D710E897201E6ADB181D5C84
-:10B35000086FFDFD723AA84C3E9F9BFAE8A09EE85C
-:10B3600094614F2A17A2833B89EE18641E7D7430C6
-:10B37000E659333FDEB449433A781FEC94D103D702
-:10B38000FFA4A2FBA6C239D02609CF994EBAF4ACCD
-:10B390001B183C01E4F3495FE4EAA9E5FDF02DFB4D
-:10B3A00046FAE699FA3DDD72AB2F999FF5A654F463
-:10B3B00053A493928AFF7DF4F38E2D79FCF2726789
-:10B3C000650DF0018924F7E71AA921BFA5344FDFE5
-:10B3D000BE13F4E9494FE1E7519AFBA833BC1CE8DE
-:10B3E000E20E511B3F4FE8DF7F0EB03F1B664D7FE3
-:10B3F0007724F80BABA7BF6B437B08DB23605716A2
-:10B40000F0B808F46F0C437D90785EBAC35590F4A1
-:10B410003C767D43DD4468973874A29AE3E008B334
-:10B42000A3FE9330BF97311FC51656E15E9A229056
-:10B430006AA0739B1C6E817BBCB640E604DD84D79A
-:10B44000888BF9BF9CC78FB714D0FACEF75E5461D2
-:10B45000D076DA0FF8D71C39F22766FFB42D93C5E2
-:10B46000279222D3F742884FA0B0659F4FC73BC8B1
-:10B470003EF5A702C383EEB5333F0FD125D07BD76E
-:10B480003B89F187F6F7EF8D3810B989E5FB8DEC34
-:10B490002696CFFD972B6B987F32715DAF3FBCA195
-:10B4A0001BEC99EB0F0FC3FB74D77B46BF07E70B71
-:10B4B0003F051F3ED0BB9FE9E5C47A8F733EFDE791
-:10B4C0000E51B7D175396EEB3DEA86F17E8FBDBF67
-:10B4D00078C36F8FDBDC34FDC32B276D104F7433C3
-:10B4E00004E8D079CD239AC28CE028D69F4FBABC0D
-:10B4F0000CEE1A32C76B6E8F6E55A1BD55EC9CF7E2
-:10B5000086DFBE3213D4276D6F3DA437BF48146861
-:10B510007FDE21AD995DBFE3ED1DA6ED89FDEDF563
-:10B52000E391DF2B941D88977E3C39106F069EF0C7
-:10B5300002478505CF686F1878EEC35BDADCABC8CD
-:10B54000F8D4FC72BD67D47BEC7E221B57229E3F51
-:10B55000832CCA6FCFB8422F03DFEC75857E03E9D9
-:10B5600032476F9E5C88F70F5F05BE5C2185F3B3A1
-:10B5700046E0BDC4D143E05D98EEE4E7AB897CFAD8
-:10B5800026F00BC475F338CB9BF8FC8E7DFFB41707
-:10B59000E3289F78350FD2E552CF96EF02BFFD52D8
-:10B5A00042FBFB9343A3078D477B93FB3BCEBA8CB7
-:10B5B0007759D8FC6EE676DCCD87DC517847F3E628
-:10B5C0007AC962FFDE5CCFE23888DC3DFE3A8B1D33
-:10B5D000D9C4E31D06B603FBCEC4768CF91DCDCBD2
-:10B5E0001E07FBC3FB27291AF81F8EBCF8C9EF6B97
-:10B5F00029ECCA75E0B9EC163FA7DF4A11D7FD7EEA
-:10B600007FC85D0A7EA74DE9419DCE73D3B3A44B9D
-:10B61000A4F8393AE6F628C4216E9D2EA2CF6A5BC3
-:10B62000FC814815D42B61EF15A9DC1EDDD67DB257
-:10B630000DE8F1F46B76F4F73BBD128E6393AD3AEF
-:10B640000FECF7F73A94A4EFE39DF7C82C8E58E877
-:10B65000C178B7F924E200B971A87BCE50188F2FBA
-:10B66000485420FFD3ED92C8EC64C3CF1193999F47
-:10B670005D97191CE2A9EA34C7AB6D9C3503E32939
-:10B6800016B4BE84F7297DE5C9DF87BAC4CDEED9EB
-:10B690007ABBD3AF04FC7A6788F8B69137D82B40D1
-:10B6A000BDFCEE2A05EB478441EBE7AF51AF04BC8C
-:10B6B000427D90FFF917597FB49BC53B6DE7FBE4D2
-:10B6C0000E5BB079066DA7638B5F80F530CA85DCB1
-:10B6D000CC9E393DC3F0DFB0B8F6BC22D509EFA44B
-:10B6E000E48590B989B73C82F1B77BA01CF36F2247
-:10B6F0001E3AC63C1983F3E34DA01B609D6D8C9EE2
-:10B70000366D11D09F49F1970DFAE2BDBBEDDF8494
-:10B7100079E4B7082AECBD699A74DCF51E07A3F337
-:10B72000D67B701F08EE516837AFFD37382E6F8A11
-:10B73000F9EEF130FA78EF02F491E1667E9BBCFA03
-:10B740006EBE4F8AE13B8911C013C0A172F63EA1C3
-:10B750001CD2CC7128FDFCC3F661749E2138DFAA8F
-:10B7600099AC44C10F20B674E07BC0F32376720518
-:10B770009D5FABD01D027ED12789FC1DAED09B8082
-:10B78000A7ADDB87623CDB06319487FE9D7F55F0D9
-:10B790007CEC68E8937BE13DDDDD9315E48BA32130
-:10B7A00076BFF5FE35851DB00FF7D657E13BBF518B
-:10B7B0005541C9D2584E5E180DE7836B4455A0E53C
-:10B7C00023D5C63D0315EF314C903EBDB218CECF08
-:10B7D0008689E04B22A705F63EC8FA35552AACEB20
-:10B7E0007A355330EF5BEE7033FDF2B2BFFA0E37AD
-:10B7F000C563E0AE1D2A35E3297F668C037FA1DE99
-:10B80000A268C63D7178572483AF4B46B7185BE4F6
-:10B8100043D8B3986E91B74D637ECA1F5C1566FE20
-:10B82000453893AC40FF22FF0BE0BA667268D358EC
-:10B8300017023BD72DC2F2D04E166D27A35C8C5554
-:10B84000D076F7F843BB519FCC74209E88DCD3069A
-:10B85000788ACECC0E425CEB8E29A35E82FB551912
-:10B86000277AE7801E8DE6BAFED001726ABDA2017A
-:10B870009F67AC3975237CF7077F782BA4194DBFE0
-:10B88000BB13F481BFE74F0DF87D9662F1EF65BC05
-:10B89000FEC197909F51AD58FC84BDFEEA5D809734
-:10B8A000DD2591488DC6BE87B2FAE771606DF72C31
-:10B8B00078F7FAF43562700FCFC779ED54A39B186F
-:10B8C000DECA41AF1978DB206A5DF02EB37EB50386
-:10B8D000E9A38874A3BC1A06A7C8234CF4FAFAC6D5
-:10B8E00055102791389E1F73BE853F785F12D60A88
-:10B8F000E25194612CAEFE60597700ECF82DFEE425
-:10B90000F109673DACBE3DC53DF5331E460F201223
-:10B91000DBCA300D9542EA217A1AA4398E10C4C7C9
-:10B920001E14B53F229DEF9034581F286FA3EB776C
-:10B93000E48533E81F3C12F90DA6CF7B8A8DF662B1
-:10B9400059F03E6EF9493C1FD9AA321AA96D61F22D
-:10B95000A236D0E380F38ADA12A2EEE1F4A61B78D5
-:10B96000067F17D75735D731BC6696103C6F059FB9
-:10B9700018BC579605E528FE325BD6AEC27524DDAD
-:10B98000FA085A6E2BB40BEBD32412D66E8F03F940
-:10B990003722E17923E5F75FC379624DEB503C6FC5
-:10B9A000876BEAD05E3AEF379DB7D741DB01FFDF07
-:10B9B000E91609EFB140D80BC0DA1A4ACB489FBD4F
-:10B9C00095C5B45DAD5C5537197460C831CA1A0BA2
-:10B9D000A8BE00BC2DD0F555407F271DEA0B300EC8
-:10B9E000F74EBB06F35FB0F3A93BC06E71077A5AFE
-:10B9F000403ED44E66E34D6FA5DFD1BED17E0DE54E
-:10BA00006B5BED1AEB8FE3AF9CD319C7C3423EEEDD
-:10BA100085ED6CDCAEDC6804E8B3760DC52BE485FF
-:10BA200019DD834BF3BC887C7502E6EFD5B3B0DD3E
-:10BA3000217313F82281FE8C79D5F079D5AC61F3AE
-:10BA4000229C9FE8B062D06E4D399BE702C2EA8B20
-:10BA5000F09DB6BF90CFA7467F12D3852D764BFBC6
-:10BA6000BB8BF776E37DB612451310CFEC9DCC3C33
-:10BA70003EAFBC26D65F5EC993882F526F1A2FFA4D
-:10BA8000454D30E5ABD3CF53C6A276AE90E74062CA
-:10BA90003AF97D05CF518A765AE7757AE3E8075A75
-:10BAA000C1FF79B782E71507C5E09BF9B80F553498
-:10BAB000267F82BF990D727A615310E4F8814A861D
-:10BAC000FFD3DF2251A0879127AAD301DF234F8420
-:10BAD000795A87E7D81421429FDCA3E3A35BA7161A
-:10BAE00001E4657CC48F16831CA0EB0CF660AE7974
-:10BAF000DC747C192D59551087943939BD4AC1A77A
-:10BB00007F13F24FEC9A03EFD8661EDF752BF433E8
-:10BB10008C98E643F3477947B0FB57C7692E94AB3F
-:10BB20003F7517AC472B7F8F7E248C2C1DD3E39061
-:10BB30006650FEDE9C0EE394C98CB27E79B0EFEEC7
-:10BB40008A092057F0EE4819A6315236506E98CA2D
-:10BB50008FE1E5752149B952AF66D997EFBBFBF28A
-:10BB600031B07FDF0A76621ABCE7A77E0AF1317A2C
-:10BB70005044BC6FB5C51C2599F05EB848C07ED94D
-:10BB800056FC3B11F86EEB211204FAC8A8FEABDD9F
-:10BB9000BC8EB51E3FCE5B56C866E0FFA3634ECD9C
-:10BBA00082758A1E11F13D89AA5F7876B9C11EFAA5
-:10BBB0003D8B3FE978BE0EF5F7ED794AD2F79AC989
-:10BBC00005ECC4C4F2E923E7A01F2F7FE7767C17BA
-:10BBD000B676961CBC8296CEDC595909768C564DA9
-:10BBE000A96B281D77FB84B5C084DA6C765EA5CD81
-:10BBF00062DFB5192CDDDCB07822ECDB239DB2B31B
-:10BC0000888E77EC46F66EDDE6924F1C616A979659
-:10BC1000573EE6F816FDFE6E39D582F4FBBBD33EE7
-:10BC200071C2F9CCFDE5551980CF432D56BB8EC0AE
-:10BC3000A36A741F546A8F84BC745CADBF25884F9F
-:10BC4000C91E6BABA1B0F494072C9C01FB9B8DAD7E
-:10BC50001D73814E17146378F280F97ECEF5C9FC0E
-:10BC6000FADE59705FA94027EC1C35720F0AE58592
-:10BC70005C6414E8DD2874BC3BD9FE2422879E0353
-:10BC8000B91C29092B50C59067AD236B1E0479F6AA
-:10BC900025B7EB48DD62BC0789FC2F813DD45B9959
-:10BCA0006CDF749DDB857475BAFDDA57C13FBDA0AA
-:10BCB0009ED9FBF9ED9F0AB81ED4EE1B46DBCF2FB1
-:10BCC000C7A72AC98235114729AC4F9148340DC600
-:10BCD000D345609F10A1FAC78C07A3DDBFB5FE76E0
-:10BCE0008F1DEB5F079BE749FDF3F1F0F9E405E9F0
-:10BCF0007C92E8E939BCDFEFDDF7E9912980FF3577
-:10BD00006C8B941F795B7098C691AF5FDC38AE8501
-:10BD1000F6283E1FF1B07B0BDEF21EBC679428DFD5
-:10BD2000C19C07BEDDED3E3B81EDEFADF27400CC72
-:10BD3000E92AF17B5E82BC2AB577E13DD0D603ECDF
-:10BD40005D74D87943BE40448DBD171B35DE2FAFDF
-:10BD5000837263BD1E15E8A075CCEFCA003F5BB8C7
-:10BD6000BDB0B084E07E75614E37DA0BF39BB8BD91
-:10BD700020079B41C8BADBFD6493C97E405309B6D6
-:10BD8000D04DDC5E30F43FD7DBB581EE16D4AB4D41
-:10BD9000EC7E6A9F9DA133BD9A1F607ABDB685F681
-:10BDA000A37162AE30DB254C8F6B3BB9FDC0F570E3
-:10BDB00006EF37B385E9AB0CB0237C107EA0A35E01
-:10BDC000C6B3BCAC7EBB654809D39719AD0751AF6C
-:10BDD0007583D36508C80DA62F735F7A45073405B0
-:10BDE000E8E7362AA77FEA667234A052FB2CBDDF53
-:10BDF0003EDB20F27326C2EC438CADA7E37C9CB7FC
-:10BE0000677CDFCBC777F078FA3741BEEE8B144EF4
-:10BE1000904C7C6BDCDBCA2B67E7F479F5EC9CDAA1
-:10BE20001B5CF4A0643A7F68F1B077AE5A0CBAAAF2
-:10BE30008F05A05DBC4788725C41BFDA4678170A5F
-:10BE4000E885EFAF6E70F3778D38FDA4D227861C9E
-:10BE5000F29290AF84E2F7DDE88328AF75BA5F8293
-:10BE6000B9BD1B69CC5E02FC1EB9A61CC6BF75CA53
-:10BE7000E71877919F62BF78DED8677E45B9EE9D5F
-:10BE8000F50ADB87768B49EFC94CF3CA389F2E99A8
-:10BE9000B8019FCE087BA7D03959495AFE122F937B
-:10BEA0009B2E2F7BA760EB9407F15E634AFD2C135A
-:10BEB0005D4AA24F0D7DDB0AEB3C9590999E1B9A43
-:10BEC0007594FBD16A09E52BC17D6784FF5E8C5EAA
-:10BED000ACA0DFB0D51671C07A6C2BE7EBAA3A3A6A
-:10BEE000E05EFA575E178A0F58E78D21312A14C099
-:10BEF0003A47D552E6D7C177394ED3FDBBF99CE21C
-:10BF00004A2FF36775C99A08F189F92D8CBEB64E90
-:10BF100051701C9B266475480566F9CBF0749D9B97
-:10BF2000D1D7A629CF217D5DECF816D5DF39F55D97
-:10BF3000D339E2A97B1F2A043CF7BFCB121AF4FEC7
-:10BF4000C2A2FA97A6EE4D723ED0970FFB280FECD7
-:10BF500003A33798CF59E6F1F55DE0B5FAEF40BE9F
-:10BF6000DA707311CD06FFD281E9511FFAEF97B154
-:10BF7000F3DA5BF879ED99BDD7E2BB07A570973688
-:10BF8000C9BA7FD0607D07E2837D0F6533BF46D499
-:10BF9000625FDDF2E04FC6B2776574FE7B1A44CB78
-:10BFA000AC60EF5FA39E7E2EA8DBA5FE77CD8C77DD
-:10BFB000D82EF65DB7746A86E1BE8B54639A45EA63
-:10BFC000300D9008A6D9A40BD31CD8E7C2FB6BA4F4
-:10BFD00017538DA82231C9FD421244B88854632AF0
-:10BFE000C3BA65F49F4BC89D0E8CBF80F30BE07BFA
-:10BFF000E39CC238DFAFF6D644BC49CE2B567B4318
-:10C00000DBBDA8576228B7E773117EE2C763BBE0C8
-:10C010007ECFEA2DEC7E8921D7715F43DBFF513A59
-:10C02000D303FA0E01E5D73AF7D597211E5B6D1FB2
-:10C0300099CF1B88C35104BF1B63B43B9FFB17E61A
-:10C0400073FD07EE6D76FF2E88F77FE6839FC19420
-:10C050004FFAF2D97D6AA31DD13D6DD460E77BA66E
-:10C06000FA188F5C9360FF5F506F27C00B12EBFFD5
-:10C07000850E28ABDF0FF7A3CBB43C76CEC4F436E5
-:10C0800025240DEBB5D8DFC67D586466C88C9713A0
-:10C090009CFE0D7DB220C1AF9F982E90395F24B4D5
-:10C0A00043359F1FEECDE0DB2626BE36DEBF357E54
-:10C0B0005FEB96505819C6AA05601D553EEE0869FB
-:10C0C000AF1A46D3F70136F9F35FF4857FE735C53C
-:10C0D00043A9A13AD1FCFED222CE8733A5D64A90FD
-:10C0E0006FA7C32408FB875B48DD56B0C7C82B1277
-:10C0F000CAB7E174DCF0BB3FB970A0918EB0AED08E
-:10C10000F4E306762FE754C2FBD51FF277914ADBA2
-:10C11000EEB81AE8E00C7FB7DAE07FA3DFD22EF7A3
-:10C120003CD0FBA55DD36BA15C69A71D7FE7A9F897
-:10C13000D0C66AF00BC13B2D2EDA4F0EEDCF910E1B
-:10C140007284A0BEFDB0D5155D47C7F9619B8472AE
-:10C15000F95C8988EF8DC07397121F5F5A3AB4F368
-:10C160005F37811D7286CB11E3DDC70F2B35DC1FD6
-:10C170003F7B608300F7123E9CA7E1BC3F1CD69535
-:10C18000974EF193E363F7738AF6DB6385741C4B78
-:10C190001EF97D610DC8BFC2C89264E7CC437C4CD8
-:10C1A000FE7DF804C178B80F9DFC778D1C5D3EB311
-:10C1B0009F35CD2758E4D6875EFEFB48391728C740
-:10C1C000E3CB89A7CBC7F8BECB07E751F7B87F8C85
-:10C1D000F7D74E3DC1CE299EBDB7360FFC51C37D6A
-:10C1E0001A3BF73EF038C68DC33C601F4DC7A7C150
-:10C1F000F8EE71BF7906FC0FB41EDECF30EA9D3A2F
-:10C2000050CBCAB7D1F23EC43BF195013D30BC934F
-:10C21000FD4C4E18F6E3D26816FEEE427FBE88F95A
-:10C22000304427C57FE9FE6BF05CABD497CEE8596C
-:10C23000ED1A3B07C71FC983791C981ECE033FDE4A
-:10C2400029E377A0E4481EE0A1DA1B2EF599E6FF6A
-:10C25000C1DB4FA17C2F16EBDEBA0BE8F231F63BC7
-:10C260002477BCBE5D34CB8F69F0837893607E2BDE
-:10C270007C701E75AAEFBD9C088BF739CCDE635D20
-:10C28000CA79EF5407DD3F517C7CB0FF07987FAA45
-:10C29000EF3D9B2E8C27FB60FFB174486B783C3FD1
-:10C2A000895E8BFC45F1D2E248A2AFFAEE4545D952
-:10C2B0007DB7B3027F87F43E036F75CA1CCB791537
-:10C2C000E3EF9CF682E3682F4793DF934BD4F78923
-:10C2D000EFCA5EE81EF049CEA7EFF277D1567BC3D6
-:10C2E000D7FB505F58F548CDE6E57980E71AB8539B
-:10C2F00087710ED3AF80FD36DE3761EFCAC6104FAF
-:10C300007DEFC64EBC02E21C4FF9195CE79BBD41B4
-:10C31000E77864EFD256B2FA052CBF95E7FFCA5B07
-:10C32000BD98F54F04F6BB46363FFC3E8521FF52D3
-:10C33000CFDFFAFB14F7834C1E82EDADF60DC16C16
-:10C3400081CDE7EF6BCF90377F773B8E7F6C3B865D
-:10C350001C06BE84903D120C8EFD47E0EF6FAD4F82
-:10C36000E6E65BE4F917F78E688673A0730182F145
-:10C37000CFF6D6B504F4D2C29DDB93FEBE5D1FCCD2
-:10C38000E349941194CF4CFC1CF3313B3DC6E521AD
-:10C39000FCC1F9CC2842F87B1794A6B230E406F72A
-:10C3A0007FA3F97BEFC52482F6D558D2856909E9C8
-:10C3B000C6743CE9C5148F494780AB2F28F1777BC1
-:10C3C0002B60F2CB1CE1FB2154F7AFF6F033404F6A
-:10C3D000F07EAF20815DB4622A8CFFA84F357E07C6
-:10C3E0009424FCAE5AFFEF816860D7CC0E0C66D760
-:10C3F0001055FEA82F7EA390BDFFCBF821D5EFC42A
-:10C4000025FCFE24BF476CE06139E9C2388867DB50
-:10C4100057BF3086E27FC97E2FEA8351ED4DF83B4E
-:10C42000604B487716DC2F1DC5DF93206DEC1D0F88
-:10C43000E39D88316D76CBBB1ECB137E876829FFC9
-:10C44000DDB0A509DF8DFB9B9BE143923882C4FBE5
-:10C450009FA77D29DE612D49FE7B3089F73FF77765
-:10C460008918DFB31AE285847EB937666F9DDD4A8D
-:10C470005F5D971599DE7B6A14826C3FED7585F6DA
-:10C480000903FB19AB323BEE8020248D23BB268DA4
-:10C49000EF174913B98AB6D3B84C5661BFD918758E
-:10C4A000E13968A3CAF685C3BD550ED8A713BFA846
-:10C4B000C2FD94CBA569185FAE2C9727C2B9E7F1EE
-:10C4C0003D4BBAE1FE426340463FED703F3B0725DE
-:10C4D000C3447C1FA0497DCC3F1FD6C9C3CE19736E
-:10C4E0005582BF637AA4E37611E046BA6D190AFD5E
-:10C4F00008E16EBC77334C26FCFC75F6044A7FF9E4
-:10C500009C1E64D28AF78F672C7FD7097A3D9FAF34
-:10C51000FB94B4029C87CCD77377FD493FD0E9F3F5
-:10C520001DCD2F5F4EDBB345658C6B2DFEB2F10F39
-:10C5300097D3FE7A3B148C6735F090B746B6DC9FF4
-:10C54000CDB9CD0A2B09F7886562CAA7F038DE3F5E
-:10C550003CB81A33C755658698B350F5E0FDE04BFB
-:10C56000D304661773B814608A924E5BA4CA45C799
-:10C57000D9F986807E87A31D8BF2314EFF27E17C9F
-:10C58000A06F831E12D7EF4BB087908F7427BF1F09
-:10C59000EC84C3BA44FA696A2023C11FED881E7770
-:10C5A0008D83753C61C3F7A4D673FB5BF6B0F87757
-:10C5B000835E12D3F50974B7FECB6B91EE7A29DD59
-:10C5C000257B17CEA827AB1ADA09B61C1204F6B0E1
-:10C5D000657667ABB4DEB8A794A087A2ECF2474BB0
-:10C5E000D2C09E1977EC7AF65E1FC517BEF758AF1A
-:10C5F0008C847DBFBD3E73A49C01E53C488F9F7831
-:10C60000D8F98F5CEF0E427E6347454033D1757396
-:10C61000833A521E09EFA53A46C2EF2335A7F89D8B
-:10C62000E65CBF580DFE2585EFFF97A4B1F12E49BA
-:10C6300073637A0B87EF93F53930FEFB28FD40BC1E
-:10C64000C091DB18FDAE1EE6C07BCFAB9F1F3174DF
-:10C65000B038A0071B0223016FEDB7D5A0DFA3728E
-:10C66000D571E715C0E75E870AF428F946DD330D7A
-:10C67000E8FD051BDEFB6AF45668F34DED49BEC9C3
-:10C68000E85792443D1B36450D697FB8421E06F4BB
-:10C69000A2EF024DB461DB11067BF56C81E66FDB26
-:10C6A000F62C8387E8BB049A7FCFB6E7199CAB676B
-:10C6B000C32F80DCBFED570C1EA9EF02F8A16D2F30
-:10C6C00031186C0B6AC73CBAEDB75780EFA7D1168B
-:10C6D0009C0BFE9D1FD3F197D8E0BD5A961EE478BF
-:10C6E00031F21F83EF14DF87789A98FF24AFF77435
-:10C6F0008AFC7FE7F98753B4FF335E2F96A2FE5181
-:10C700005EEF788AFACFF17A2752E4BFC0F35F4C2C
-:10C71000D1FEAF79BDEE14F55FE6F55E4951FF77C6
-:10C72000BCDE6B29F2FFC0F35F4F68FF4D5EBE8732
-:10C730007FCFF1B6FC41A77497D3C15EF82CF6B653
-:10C74000A0FDDE5E578EF4DF3889D91906BDE740BB
-:10C75000BC26C85B95C5558D52D93EEE9769CCDE97
-:10C76000A85C55B40DE86EF5AF24D4A7548FE0EF64
-:10C77000F0EAAB58DCCBEAE7D97D90D5AB647C27F7
-:10C78000CDA047A3BE31FEDD7C7C4D7CBCC7D20A68
-:10C79000F9794B60E46C73BCA76A851D949F206493
-:10C7A000A72993E997E255558ED1A03FA87E01B9FC
-:10C7B000B9DEA3C4E01EFD7A55C6FCA6CC2A15F24C
-:10C7C000755546FDB33EB3CA311FFD39E9E89FC830
-:10C7D000E7717B4DAA8CF7F865FF0CCCBFFCD1D973
-:10C7E0002AC8D126D2EBAF84F9AD91F1BCF6485DF1
-:10C7F000157ECFF77FE607F9FCAC9FE1FDB8F7396E
-:10C8000027BCE72A7F4F447D81F8A3FD16AE11A314
-:10C810001A2D725C5D2D02FC4013D357F4CF3BA15F
-:10C8200082C771D0BFCEDB2B5E80F89DC62D721003
-:10C83000CE73E04F36E98322FE7BA54355B66F34B5
-:10C84000F4D57DDC8FAB071C188757249380F977CC
-:10C850002C87AAFC3C8DBF63362262D54F052DD6AE
-:10C86000776CF213F453A2BECAADA3F2D154DE1E0C
-:10C87000502DB0A0B2F72CFE17044CD03900800028
-:10C88000000000001F8B080000000000000BDD7D91
-:10C890000B7854D5D5E83E67CE3C3349669299640F
-:10C8A00026CF49801020C0044204449D848011B1E9
-:10C8B0000E0F15D4E2846780BCA0A858E9C7840491
-:10C8C0000C1435FE46047EA003A28516ECD0A2020D
-:10C8D000063B2022FEC53658DB8B8FDA11B9883C27
-:10C8E000C747953ED4BBD7DA7B27734E12C5B6F740
-:10C8F000FFEF77D3CF1EF6D98FB3F65A6BAFB5F6ED
-:10C900005A6BEF215EE2FD5A47C8E23D8B6FB410CF
-:10C9100042C6FFA228395A44C85253D210924CC87A
-:10C92000D7F07703214DCBC3D7F7D513B269B9A997
-:10C930009F429F4D5F0E9F464A0889255A7CDB2403
-:10C9400042562DB7F553FA75B51F68A32F9D846C19
-:10C9500056829389833E430A69CC23E4D0129940DE
-:10C9600079B1DB1432D2268B5FFBFD4DFDA1BC48B3
-:10C97000F6124F577FEDF399E5AE7EF0FDDF50984C
-:10C98000605C7D40EA777A38FDB71270F91309E9E7
-:10C99000D3AA9C8A9A08FE7D4DFFCB6BA1E5C2AE5F
-:10C9A000B25EEFB7D9AC84E492B876141E4553D684
-:10C9B0003BDFB4078A607C05C7D7C291DD40E71F23
-:10C9C00037AED165539557490D85A40F7D52580157
-:10C9D0003F41A71C7A9ACE336BE983A34FA71292EB
-:10C9E00079D4D20C7825AD4F129246880EBE4DE711
-:10C9F000AD483E0FA17468CE2BF64AF479EC590B82
-:10CA0000C353B615F16490BCE937D3A751F6DB6088
-:10CA10007CFAE783F11FCAB66C5D9307C58009F005
-:10CA200090B5830E98418BC19CD53E85D289A29B3F
-:10CA30008C86FA375A7C745E3BA4CE722594C3214F
-:10CA4000036B4F4804FE6F8F2CF17AE2535C84EC49
-:10CA500096245E5F54599145DB2BB6418A9790B975
-:10CA6000AD435BF4D741BD2CFAFBC8483A3FF81EF2
-:10CA70002F035E7E7E84D707AF6BA9E84BC737884C
-:10CA8000EF9320B4DF23CBAC1C2C6D81F17797F3AF
-:10CA9000FE41CF6ADF1884E7669D9D9025B6B216E9
-:10CAA000ABBB0BDE95F61B5B1AE9FC2E7AA2497430
-:10CAB0001AA476EBE93442875A352DE0073C12E29E
-:10CAC00025FEC1849C9528724774D14FBFB72C981E
-:10CAD000495F5D3EFAB7A422FAACD7458F2650FCD9
-:10CAE000D5EE0B98F4F914CF7A5F3033AFAB5FED2E
-:10CAF000DE492440F9A6BEBD189F3DF43BA6C8FF01
-:10CB0000543F93E12ABE7731F246DD2E5A55AB0BE6
-:10CB1000B458FB607BC2E8DFF3FC44FF8BBBDEB89C
-:10CB20001DBE77C9134D9B007C19A178E9A19F68B0
-:10CB30005FB7AF8C00DF5FB1F89A6CF4FD5D76B63D
-:10CB4000CE88D2E085F66153ABCD4BEBCDFA56BF24
-:10CB500097B6A7A40CC923BB9EAB6C7D713CED7B43
-:10CB6000EDFA099B48EA44CAD7C11AC5FB34817261
-:10CB70003061082DAFAD55863752905614FF71586D
-:10CB800011949FB312232D37D51C7115C13AF21A97
-:10CB900008152F64EDA8B01BD67173AD61DA76E08D
-:10CBA000DFC862D79CA2AEF157DAF508F7EA57E87A
-:10CBB0003A1B4A9FFAB05D82FEFD1402EBD06CA7CF
-:10CBC00074A665B33B8504F3A09D752DACC7D5FA5B
-:10CBD000406539B473CBE469FA5D73BFA995E51478
-:10CBE0000E975396740847C5C9B9B4BEC96600C943
-:10CBF00046DEB0CFDC0578FAB9E26D8075F873AB2C
-:10CC0000D516A4155436FA60DD2AFD1C21281B75A3
-:10CC1000A4214CE1CB2C26FEB0B50BCE376094118D
-:10CC2000F03420BC6BCDE14965741CCB62D916A4ED
-:10CC3000DF5B5DBBAE633CFDCE7FD63E7FA291BE87
-:10CC40005F93A61080C3EA50228624CAC7B7501843
-:10CC500029DCBB1BFD36909F31A742B6D17A4B5FD2
-:10CC600003F1C4C9416B112DC7C9A75487E233D35F
-:10CC7000FE317BE0651BFDEEF0D7DF34417FD70846
-:10CC80005986651356189D934AD4E3D8C6A8C74958
-:10CC9000A950D73B26AAEBD3A6AAEB5D77ABCB195D
-:10CCA000B3D5E58982DFA8CCB196D279B02A628962
-:10CCB0007EBC9C24217EDE02FC5B0A642FE0C75C04
-:10CCC000BBFDEC5C5A9F09F284C24F8690D0D3948E
-:10CCD0009E87737EE889523C1B531A3CF6A2EEF8FD
-:10CCE000C8CC36DD0CF4B2F6556C84B6B7BEFBD1B9
-:10CCF0009730BE95C4B5CB03FCF84E037DE1CF451C
-:10CD0000E149847F7800DF0D7FFE11E8BD133A2FE3
-:10CD1000E03BB356C1EF3F3CD513D2E5B1E684B654
-:10CD20004FE2ED934C6B3B7443E8F3DDD58B7449D4
-:10CD3000DDF19A461A245897943F505F902A82FA60
-:10CD4000E221995403DFD0E54A603C1B74A072E6EF
-:10CD5000C61403F2CDDFB97EA59C26437D9A8D8D46
-:10CD60006970CF36C37A5E7994F1FF4A031BA773CB
-:10CD70003C0F7E145510C849A35DC6F1C438EB6C56
-:10CD8000BC0D2F3BEDACBCE748CACDB02ED74D4D06
-:10CD900019067C62944900C64BCE32F906D0F99947
-:10CDA0005F3304253A68B2428EE853687B0BB9C7FB
-:10CDB0004FE1D870CC12D4D1F7E639FF61A34826F1
-:10CDC000857606F79E15DEDF831C8855298847B3D4
-:10CDD000B3D536AC88CD2148E14B817F50F958D688
-:10CDE000AFCD06F43497B5A2FE3617B7B6029E361D
-:10CDF0004C94D19E48992D233F9BB3C327FAD2F779
-:10CE0000FA39B20DC64BA18ADD4007793CABD5EFAC
-:10CE1000877129CEE552C62A302ECE907E2795E323
-:10CE2000D5E1D87BBF44C74985F186B0F680273B62
-:10CE3000C793D7EE41B81D7CDCD4BEB4FD10364E8E
-:10CE40007369D738828E1B2A4908E013DF15E37413
-:10CE50008E4F7C12C855FD6F28DE289DA41C13023E
-:10CE6000B772010919F3003FFE86ADB8AEAD641B81
-:10CE7000AC17475639F051C6B18D93E521D0CF821A
-:10CE8000DFD1CF2121E0E30C8598AE4F01FBC58FA8
-:10CE900078D4AE57F791D629748D74D245BB7EDD18
-:10CEA0000A69D1A5745FC76E87A3BC60480FEB59B0
-:10CEB000B35EDCC762F702D36BD7F596844BC580AF
-:10CEC0001712DF5EF7ED659D2E7C623C102B9DEA0C
-:10CED000098AFA1CCDF708F9CA086589C89EAFFB14
-:10CEE00080DCB7F3F540F5155DAC7B86D9C65A6199
-:10CEF0009D2E22C85FE52FACBDF33774BCCFFB1964
-:10CF00006CA057B28FB576807E24FB02FD810E9B0C
-:10CF100094C04F1268FDA693E904E4F66A339906BB
-:10CF2000FCAD703ED7EA97957CDD7840CFB9FEF92D
-:10CF3000A7B007C37DD306D9E8DA5BF9D8E1632649
-:10CF4000E77FA39D45FAA39D9575A4A3D10ADF6F42
-:10CF50002D6F3151FC9A5F67ED9B6939A800FE6A1D
-:10CF600072611D1ECE9E8B7852DE3612E0D3C13A1E
-:10CF70005F08CAE41D3301F9BBE3B9BBAB3D207FB9
-:10CF8000D22678400EADE3EBBDCD2EF5882FC5E05F
-:10CF90000B803DA17DFF08E017E9E93F5B45E938DB
-:10CFA000F8290359432B0BE5992D79B02E5653F9E7
-:10CFB0004B6B67EA3C753F96BAE8F30B73D9763B47
-:10CFC000EC3B969B48C048E775452201BA38B31D33
-:10CFD0006F9481FCC9211109F46C4E03357881AF3F
-:10CFE000965848208EDFB3AE28D8FE1766DF763B12
-:10CFF00097FF262A07F4EC9FE4E7297E52E560328A
-:10D000000AEC17FD2ECBFB203788A3C2D7B9DFC8A7
-:10D0100007FEA57A9F7E6F0F9FBF9EE2503F8CFE5A
-:10D02000679523C621DDDB3FCFF1A398AC11909724
-:10D030008AF5F849942F36E5427C3B5388E91B5228
-:10D040004342FD2486172CFFC086E54C2A7F8DC302
-:10D05000D0EE0F1A01CE24B6FF203E9FC79106EBFB
-:10D06000852092B34CA4C544DB21B7D3F5E6261D39
-:10D0700066B49B8F100FAC078A31FB9904145904D6
-:10D08000F0BA8990CAF875209E0536462765A90E24
-:10D09000F74B835E36233CFA061232833D04B051CF
-:10D0A0007C2B4B484881FDD65203B62BB079B09FFC
-:10D0B0008134A03DBBFBCBF732404E5B8E527B6C84
-:10D0C00028D059463965B1A8D71F218D88A7D39C90
-:10D0D0003F362FB7219D3BF7678137399DA38DA040
-:10D0E0002F7296A4A8E82BDA655DC92481E1F1E3EB
-:10D0F0008670DCACBE47245204F53958BF79B9E7D5
-:10D100005BC6CFEF657C37F251EFE36761FDE6C8A0
-:10D110009BF6EF51546C8A1DB1FB3D5DF6B516CF01
-:10D12000594BD47279E83E7559E0C5ACF7392651B0
-:10D130009C9BEF95BD5BE978D79C54B7ABCCFB03C8
-:10D14000EE6FBBDA471C53A03DDD7F6FA56FAF3D8F
-:10D15000AB6EEF2F7BC50EEBB8AB3D83EF862BEAB2
-:10D16000765AFA68E1A570396F8B836BACC9A8AAAF
-:10D170009F56D50D2EE71D7170DDE852B70F34F6BE
-:10D180000CD7CD85C66F844BB4BB75E4D5B5D3CE73
-:10D19000634AA5B117BCB3F6774CBBBA71EFAAFED0
-:10D1A000E676F72CD57E2788FC7EB3E4BB26853E49
-:10D1B00067C22BB017AD16B47BB5FCB29DEBA7EBE5
-:10D1C000C19EA34F7FA2EF7AE83706D61D2D1B76AE
-:10D1D000FEF14E902FC79E1D980E723D13F41CE277
-:10D1E00093F915F6D4B8D0AF3095AF53AA4F9A4102
-:10D1F0005EECD941FB2531B8E2EDA7D41AB6AFB049
-:10D200009118AE67612FA5109BC4F6E3CCDEE9ED63
-:10D210003BDAF11BED0CEE594BC7920FE83A7CDE7E
-:10D22000602B53607FB645427B6056854F9748F927
-:10D2300063748B847EA3590FFC6038C89551A73D59
-:10D24000FBA2F4FDAC90DD0B9FADEB20BE10E5AB77
-:10D2500074DDA2E21FD1E71387A9FDC3CB8B80DF6A
-:10D26000AC3E0FEC37AA00223ACE057D43B10DE467
-:10D27000E6F7AD3E909B55537D6FE17CFF41AD12CB
-:10D28000DA6E0E9B3A79A16D92C143ED8CAABB3D3B
-:10D2900023C1EEA90A9B7DF83411C542E75145ED43
-:10D2A0003178A61B886286A78598E059BA82D95F33
-:10D2B0004923FD862AFAFDAAF69FFE05FACD5322E0
-:10D2C00087983D19C27957B5BFF657B0D7E6F8FC35
-:10D2D000069017837618984DCAF96170585D0679E3
-:10D2E000105F2E8EA8CBC38FA9CB7F4A61F83D205B
-:10D2F0008506017D0E500507FBE2E06E23EA8BC335
-:10D30000078D489F85E72D5BC1FF3476A115E5FAAF
-:10D31000F99F99D11F75400E3F0BE5E0B309B8AFF7
-:10D320003EF4F68152899617FC225186FA17BFD433
-:10D33000219E613A7AFA7EE1B303B6AEA1EF170EF1
-:10D340000F97DAE8FBE70712D201F54A6808CCEF3D
-:10D35000F9AF74387E6CA731B48DF2C3F9FD3F7D0F
-:10D36000F641FAFDF33B3353244A976B411FD076C5
-:10D37000A39F3259609F31FAFCAE3E202F16EE304B
-:10D38000AAE6B53545E2FB194F12F05B6FFEC453B8
-:10D39000AB7F8AFD0BCF9E447E3BA00FCA1698FF41
-:10D3A0006AC65FDAF63B52D87A127040BF3C4A9F99
-:10D3B000CB1F59EE013F5AFFF56AFC0E08A9CB615D
-:10D3C0000ED74C12F73E0FC6CB5FE5023B752B41E3
-:10D3D0007BA6F0ECBB77E6811D6D64F683168EFDAF
-:10D3E0001C8E9FFD8C8EC3E4838ED9CF74C6743D92
-:10D3F0002EE47CFCA2C4EC57FAB72493F2ED425021
-:10D40000FCF95DEF176AE010E3DFCBC777F07D75BD
-:10D41000EC751DD2E3DCF2EAE1A7FB7587E7CCF2FD
-:10D42000860115FAAEF2DCF58B8EBA69BF9A3D4ED5
-:10D43000DC278AF7353B5F4EBB8BBEBFB043F18222
-:10D44000E95A33FD99474643BB9DBA30C00BF53EC0
-:10D450003ADF0BE15792A0DDDC4DF661BA383ACCE9
-:10D460005B7FEF808A3879F85DD78358BF357C7F42
-:10D47000FBC2C88EF199C0DFEB252F345B18BE6D5F
-:10D48000CA2D60AB6CD279FBD1FA5285F875C370A6
-:10D49000EB3D159E357B9E3B9A41EBEB0F8E28852D
-:10D4A00079AD91FD370F06FEDFA2473F96162F9FFD
-:10D4B000707AD3FE1199F65F73BBB53A64C5718F6C
-:10D4C00040F970E1361DF8D993CE52F9C4DE9F942D
-:10D4D000E99A3CDBBE7208F8130FE8AD2DC0E707F0
-:10D4E00012191D82BB7528E74984CD6334F71B2FC1
-:10D4F000FC539B41A1CFB367572495B17584F205C6
-:10D5000084B283CEAFFAA9C1B8EEE6AD57AF13D15E
-:10D510004EC03B3FA4AED7F2474AAA5857A4309E0C
-:10D52000CFB4ED5227060DB0AE6A9652791C67FF54
-:10D53000D49C6E3580DDA4FD0E588044D05587FC08
-:10D54000493C385F339B2F35594D74BEE7E05FCCC3
-:10D55000EF2DC1BE7C818453240B07920A0FC5E7CF
-:10D56000C2C9A4129E07A4C8233A2ECFD0FFBE3B47
-:10D5700001E5D9055BF499FF04FEDB95ED0DD2AA18
-:10D580000CEE97BBE08924A5D0E7655817C07F361D
-:10D59000565ED04EE5395DDFE72F1A50AE37865F15
-:10D5A0004E027A5D78D62CCB942EE7F7A496833F73
-:10D5B000E742F8374930AF73E1D472F0CBF5266F0C
-:10D5C000B4724AE8F3F7E19FA3A89D96EA1B960A76
-:10D5D000FB9DE65430C6497A6A4371430FEB5FF412
-:10D5E00073181A8A3D2037BE6FF5C2FABC21D5C325
-:10D5F000F486C4C6833F1FADFFE458EA36A0FFB1EE
-:10D600004305C9A0E73F219E6490BFB739FDE5A956
-:10D61000B4BDABBCC3A703FFDF04E26DA27D3ED067
-:10D6200079EFB3513CCF2654EFC0B32460407F491B
-:10D63000B313E19AA5908842F97416E8C5215846BB
-:10D640003CCFDA24859A281CB3D7AAE739B7CDD8BE
-:10D65000455FFADF7C4205232CA04D71EDE8F8F31D
-:10D6600041FF51FC2D309148021D77C17675BF8571
-:10D670002482F0D4ECFADAD8131EFFC2F1789BD3DF
-:10D680007757AA4A7EE9517E2D24FEEBE1BB0BB908
-:10D690009E9D633C8470D43FF0C080D9D46EB8BCEA
-:10D6A000F4C101B353C10FC8FA91F512F2DFC20AF7
-:10D6B00012C9A6702D6C972283C10E7893D1478C26
-:10D6C0004FB6B07677723B650EC507E8FDD1BBA4B7
-:10D6D0006022DDC7CC31D12D18C80F3E2FA84FA630
-:10D6E000E56AD28AF3A9255184E37E4E3F8848013A
-:10D6F0003EFFF226A3DBE8EAAD3A00EAD8A1528C5D
-:10D70000CB7D4ABC483F6A4F10734A77FE007CFBD2
-:10D71000E2F053BD495D26DBE3CAF9804F5A8EC360
-:10D7200073DDDEAF8DBE1EF0FB44A73E090D9834BD
-:10D730009874B357DFE3F87FE2B6B96E58FF8F8273
-:10D74000FD96C1071809F292087F44C444C7B70C7C
-:10D75000272AFF04B58BB0DCF6F86B37ADCF226417
-:10D760009D3E807EFE593AFF5108497DE60CAC078C
-:10D77000BACE927D390ACA015F01EE5397327A3CE4
-:10D7800039AC6140430FFB5301FF3A291C91411E04
-:10D79000EC67FA3DB124A60FC4ADAF5F72F9967C79
-:10D7A000387A3413F8E63909FDE91B24D22C513CB0
-:10D7B000BB2859400F6C90DE3F0A7A63C34D1ED2DE
-:10D7C00044EB4BF64E5AF40AEE712D5E884FD4EEC0
-:10D7D0002DD3D55A71FECCCE4C68D82AD3FAF47B1F
-:10D7E0000A87C1FAA0F3BE67327DFF02A7B7DBCA82
-:10D7F000F8C1B52298B718FCA987FD8B5E81753DED
-:10D80000D8827EAB748AABC4147CB680FDE8228DCE
-:10D8100012B45BE594901EABAAC8B45F1621D7285A
-:10D82000C929EC79923E258534831F365DA1F628FF
-:10D830007BDF0CDF792289C1E59475F74C027B7898
-:10D84000182BA72C937CDB90F91F437CA51B492543
-:10D85000CC1BDE83FD4CC1F0EDC1FA10C29D3EB67B
-:10D86000A118E048EFC39E0E43240BC6392EF8A43E
-:10D87000DD2D839C5EC2F5ED923D65E929B4FFF193
-:10D880000B2605E4E77197B0FF2256B0FF48DF4250
-:10D89000D69EEBB525C563D381EF1D39EA7697F5A2
-:10D8A000BEE4E1A01F4EE8304EF399D5976CA7ED8A
-:10D8B000AE35B07968E97F96D3B5FE8A444271FBF4
-:10D8C000FDFA699FA35D5D7F4551BDBFB0DC444259
-:10D8D00071FBFD9AEAC3E3A15D2DE95805FC581BD5
-:10D8E0004E20A1B8F571ADA5E7EF8A75517F454788
-:10D8F00082C391EDB3C02F795C1F5B3507F8F0A0B0
-:10D9000084FEA37ABA8F0EC6C375259504537B8215
-:10D91000334DFD9ECE4755DEF705B62323A349F0D0
-:10D920009D4BB668929DCF0FDA097D77392407F5B4
-:10D9300043312EC8F41EF875ACCCAE9D04F455628C
-:10D94000499313BBC615F5305E4ADC3C2F4D33902E
-:10D9500008D22586DF05BC05FB13B2B1FD63830742
-:10D96000F47FFB21C49BE09778FC05E3E3444D1D65
-:10D970001199CA8A7C876D4DD100CA7A87855C4827
-:10D9800059037EC9349DAC921309259D7203C5D4F9
-:10D990001310B5423993BAA6624C7C99B5EFEAEF01
-:10D9A00098007ECF9222D6BFC8E1FCAF157DE17D05
-:10D9B0002B93BB4A2CC79F18573669CA565A1E1C50
-:10D9C00057B669EA1D9A7A97A69CC5DA5F488CE437
-:10D9D000E8BC54DF3BDC13142A2F2FB82333E80EA6
-:10D9E00096AC6DCA9C5041E5586D09D3C775ED9250
-:10D9F000177D751C7F755E66275ABD51C3AC22C06A
-:10DA000043C751902B35FB249B44D78135BC2782DB
-:10DA100065E8E789EB1796B05F4DF87DECD7EBF83A
-:10DA20008532AEF33585A758BBF087A8F757355731
-:10DA3000613C5DC48B75C4EFCB94BAE2C542BE5E57
-:10DA400072FB5E96195FDBE2F74FF5306E9C9F46E6
-:10DA5000B47F6770FB1FC0AC4858F27123D8AF7F0A
-:10DA6000AAFD7004D873EF40935120AF4303E0BB8D
-:10DA70001B496000E8C9EFD7F63B24D376EFE9A352
-:10DA80009B2126769FA318F1F75E62345BA2326673
-:10DA900069DBB5ACEC8C6E067CFEB66D0C2B674773
-:10DAA000B3655A5EE698C7CAFDA29BA1BCBD6DF2E4
-:10DAB0000485E2FBBDC1D16C1DED9F1F9C32A1828C
-:10DAC000D63F6DEB793DD73A981C11F0FD57BEAFAC
-:10DAD000DA01F3A961FA6733B5374D545ECE587059
-:10DAE0006EF7D3140F337E988072ECE90B53263017
-:10DAF0007B3CE8574AC1DFCAFE503FA29C57D03E4C
-:10DB000071834E4CE9A247624E8707F5C7C0863D38
-:10DB10006067A4CF2842FDE14DF5FD0EBE2B9EF7B8
-:10DB200067B0E7EF1C3626B77532C69FD31F4C444B
-:10DB30007BEC51339B0F5D37485F2BA7C70A07F378
-:10DB40004BAF70303FEAF4D47138CEDB926F8389EB
-:10DB5000E2FD6D3D099A41CECEB7A0FD7CD7562A95
-:10DB60003792C18FCFE06E7BCC1D82F8F95D12F148
-:10DB7000835C11F2A3CDEE73A7C4ED43DA8A69D9B1
-:10DB8000DAB5EF6C9BE4735B1CF04C9321CE22E47E
-:10DB9000525B1EEB27F4517A13FB4EFAA303B6C176
-:10DBA0003C1214E62F9A33AD605B23DA03937FE7D0
-:10DBB000007BD9E77383DFE1F4FC7C19FC48823EEB
-:10DBC000E7F37D9BA0FE4EEE87177412F4FC1D9FB9
-:10DBD000F72C1DB527E87C8F3B03381EB52F8670C8
-:10DBE0007F15DA17BF03DD1E875FA24447C0FBFF26
-:10DBF0008FF07408E8FEAFE2A976299517F255C8B0
-:10DC00000B8EBF7552449FCEE405EE9FE13DE89D2B
-:10DC1000CDA9813FC0F8E2FB331EAC457B52C095D5
-:10DC200070FF0B957790EEEB4C6BEFFD19E81567E5
-:10DC3000977A85DF917FE7BDB74D186778CF10469B
-:10DC4000B9F91EDDFF34827CE171F2D21F2E3C0E49
-:10DC5000FB3F31EE38A70EC75B2DF9DC30BFD59402
-:10DC6000EE26807F9201ED7FA157DBECA10D90A7FE
-:10DC7000D0765B16E6295C262C1F24B83401DB5DC8
-:10DC80002B9F22E0C78C8DB2619C9AF209D6B74DCA
-:10DC90002FC07C11CA0F4133D4537E82BCBAB66206
-:10DCA0003A21186FFA40AC87FD31EE6BA79B70BC30
-:10DCB0001EF884F985FBB37C88B63CCE87F3F391DC
-:10DCC0000FD39A98FF9128BE2193E2F47C9E93F99A
-:10DCD0007D124AA2CFFD2FE0F9B566B46741C76255
-:10DCE0000CA7351DC7A3F4B738991F00F96CF623AC
-:10DCF000893CFFCC5B0A787D2891F1E526338B2F98
-:10DD00006DA2F633CA45CEBF22EF2DC0EDBC68B57B
-:10DD10009C04F682CBD9E95FF0C17E1FFDDBB47EA7
-:10DD200066547A1FF66B3383BA8811F65F2DE37C55
-:10DD3000D1B8FD0BFC417CEE1E2E57C97A827EBF06
-:10DD40007BA05F128C6F498278E43DD01FFCABCB87
-:10DD5000C6A9E26E039D6C7D0BF8B4727FA093C9D7
-:10DD6000490AB72FFE3B627CED7874FF39C8E9445D
-:10DD70003C4792611FD1A8433A6AE18CAE677EEAC4
-:10DD8000E8FA5CE43B315E6F70FE5917BB57A27A2C
-:10DD900070EE58B62F17FB9E397CDF4C96A9F775AD
-:10DDA000E057E92CEBBA97B5FB4488A7ABDB33BB54
-:10DDB00025A12866C0388B4752C12FF0D51B1E26DF
-:10DDC0007D47BC09BDF7A499CAD314D87E4BC8B708
-:10DDD000EB1F48403DE6308406005FDDEDF460BB9C
-:10DDE0008D90D7827A95ED973F3D2EFC1CEA7D728F
-:10DDF000BD25B605F0556F61EBE8D2C1445C07A4C0
-:10DE00006F7406E4855D3E6024C0BF7552B400D6D1
-:10DE1000F525C95785ED1A133CB09E3E903B10DFA7
-:10DE2000F580410A577DF0EF988F54BF4FBD6FBE0C
-:10DE300044FFABA6FC7E498E96C238421EC0FA470C
-:10DE4000BBA89AC569EA6412847DD5B5F2CCF9A85D
-:10DE5000FFA767906DF8FEFD02D84709394FDB1D1B
-:10DE6000915218DBC07AA9E1F8AB934F61BB1AC895
-:10DE70002B023CC2FE0AFC615019E7C7AD5B7B1E5A
-:10DE8000F39AEAF6AAE95CD3C507D2D712F48BE37A
-:10DE90000B5CC741A41BDAD9B0EE2B589C39919783
-:10DEA000132A3B30CFA99EFB3B9C87A3E3419E24D2
-:10DEB0009684C94CFAAC3FCBEC8CD1ED5B5F867D90
-:10DEC000B4BDB2231BD8BF9EFB03059D059CA3DAFE
-:10DED0001F43FF86B04FE2F6990326ABFC0C2BB034
-:10DEE0001FEC5BE17B5178E506F233BDB68EEBB5F6
-:10DEF00004D80083FE6BED8FFA0FF413C825B1EF41
-:10DF0000053905F2E13367F94F418EAD4D2BDFC680
-:10DF1000E419E52FB0E761B334AA773F9EC08F685C
-:10DF200007FBDF6FF2D3FD92F3ABC3C0E52E617E3A
-:10DF3000B9C5AF39855F0EE36F8B254F3AF0EB190A
-:10DF40005D00FD6FF34810FD42F3C1EF459F357C46
-:10DF50009DCFE5FEA4B9DC8F047EDDF83821F857AB
-:10DF6000E3CB0B08E35FB2C3D8953F037E9F0A1251
-:10DF700049A4E3D5825F0A9E6175BF3A12637CBFF4
-:10DF8000EF6BA32A0ED9C6E67D0FA7BFBD22A4035F
-:10DF9000F9B0C1CCFC51426E8C5EC6FC56C9C37C44
-:10DFA000792B81CF5FD3A33FE37F73BA093CDDE6D2
-:10DFB0002CDF05F8B7C03E0DDAAD34A2BC3C4DF500
-:10DFC000F01EEE47990CFBCFE5810190FF4D145BED
-:10DFD0004EFCFE543CD71C305703FFFC89EB31F15B
-:10DFE000FE31A79EF9E15730FE8D3526A0BD4DC507
-:10DFF000C610E0AFD27CA10FC910F06BBDAF677E39
-:10E00000E0BADBAD01182F2A3339738ECBB3734ED0
-:10E01000967F27CA9DFB3BCE3F22BE077E9E78FFA0
-:10E02000FAC79DED1FE37624C1F9AE9BCFF3B73B52
-:10E03000F95846799450E447B97BAD5C8EF228F6E6
-:10E0400091D50378A93C5F331FE6F1C9340B8138C1
-:10E05000DB6CEEEF95D2EC0887F0EF7E5BFCAB72E9
-:10E06000CD009493A23DC472A1BFD64F7C80CBB1AA
-:10E070000384C11B6C3632BF3C87FFC0D98121E0CD
-:10E08000636AD70641CEC5F69899BEA37628C8D74D
-:10E09000037BFB87603EEFEB99BD10A4F297F50F71
-:10E0A0006C003FC8815F3ABD90D753BFE0DC10B031
-:10E0B0001F0F9CFDD9AF7E0BEF0F1ABDB0DF3BC029
-:10E0C000FDF235864801DACB3C9FB1262952007E0D
-:10E0D0009F1739BD6A2CB44CDF579802D96923BA0F
-:10E0E000E267D00FDE9F0A31BBFC14617C105CCB71
-:10E0F000E29C14BF6E8023B63A1DE36F302FA0C39D
-:10E1000007070723DCEBF4BCFDC3CC7E3BC5CBA7E4
-:10E11000F617637EDF65BF01F371EB1F65F6E22C36
-:10E12000D9B36529C8CA9712D0CF38A7ED04C64322
-:10E13000EA1F993711EAEB172CFB1EF9863801E824
-:10E140009578FFF62512CBC17D70757E3842BF7B76
-:10E15000A97D809785FB5C185CAAE3799FA7297E3F
-:10E1600001EED8413DE2FF6AC747876129D36FE8D6
-:10E170000F8F8FC7A03E50C767BEAD7C491F2D785B
-:10E18000807E3F9812B835CDC9C41DD0BDFE25375D
-:10E19000CABB0F1EFE2207ED8956164F38ADF7CDCC
-:10E1A000807562AF881866C6D95FF3D2F8BEC3C85F
-:10E1B000ED462A07E3D7BDA82F2D57AF33F19C9B1F
-:10E1C000C6ECC9441EFFEF5E2FF25EA718417F32F6
-:10E1D00097128CEBC17173795C6EF4D9D821C8A306
-:10E1E000AA091763DC2F775904D725C57704ECFFFC
-:10E1F000D31B12993CA1D38471E68E2468B7CED587
-:10E20000B17C86B9466A07333D8EEDCF6C48473CFA
-:10E2100094AE60F65FEC3909E5A2884F5611D6FF3F
-:10E2200085E6F7833ADABE6A87544C452BA96A2EF5
-:10E23000C37C87059BF290FEA3B9FC9D65F4156C29
-:10E24000007E7B2111F98D7E0FEDED1AC8E91A864B
-:10E2500072C900FAB07A8744D690F878AA860F423D
-:10E26000EA78CCE83093DFA037489C9D26F410E88C
-:10E270000BA2B11FD57C11E4712A469FC701AF23C1
-:10E28000BAE43F62EC1BF420B5A3DB601D9796B3A4
-:10E29000F516DB23219E6B49038B1F713DD4090FBB
-:10E2A000D76367744C6FCE353E86CF9D697908C7BA
-:10E2B0000288B360DC206600B9D81B5FECEC852FC8
-:10E2C000043FFC8CCFA3E62C895C47BF57B38C443A
-:10E2D0006A87B067E210D4CB4C3F9B987E86A7E557
-:10E2E0002AF4B4563F6BF5B1560FA71B98BE157CA8
-:10E2F00010EF97077B64F4B2908EF95FB36C90C710
-:10E3000027E8323DD57730C3D9656FD59F34993C26
-:10E3100043A1EC27F956F02B95556681DF9ACA6F19
-:10E32000587709144F5BE9FBCDDC2E1F91C5E6EF52
-:10E33000E2F93A7AC54F8AAD40A70EDC47C79C0484
-:10E34000F7B502BF9B1369BF61D08FADC7CEFE2664
-:10E35000D26C89EB5F7EC08CFAE4F3FD89985F4252
-:10E36000F543AE9D8E97F60EB5CF69F9D28144D4B0
-:10E37000EF97B8BC77087F055985F4FD13A7739014
-:10E38000946782DF9748133241440ABBB1D6DE9BC3
-:10E390009F9ED7E775DCCEF8CC887AF6737BF43E87
-:10E3A000285378301FF80F5C2ED4EF1D5BFC20E45F
-:10E3B00001F8AD5E86D54031D80D46DD92DBC11F38
-:10E3C000345EB72CF6009D476DB615F38C2B72DFCB
-:10E3D000FDE3745AFE68AF9E1881EE4F4F498E40A0
-:10E3E00037C5E7EA493FCF0FE955E7D816EE509712
-:10E3F0006BC3EA723D893BE74651B0F4DDE2EB8F37
-:10E40000C4F1C95769898E338308C8142FE44913AE
-:10E41000DDDDC9811EE4A5787EB1DC7BFD113DE622
-:10E4200099E9D3591E8D01EC9A99C00F3DF46B4FB9
-:10E4300063768DD1D87016F2D58D2F1ABD8DB4D7D5
-:10E4400089B44012F4AF936347819EC6DC0B43400E
-:10E450000F96E7FE03E3679FFF8878013F9F9BCB02
-:10E46000D0BEF97C83D903FBB2B61C2BF357BC2476
-:10E47000852466BF4F1C510AF1529C03A95F7FD3CC
-:10E4800047EC700531C9485FBA7B71819CF1E17E30
-:10E49000EACC248B6D05ED57BD9EE9DB1AD29104C1
-:10E4A00072604A3AA79F6E97C144FF99D7EC1BD080
-:10E4B00048E15DE8B7E0B91AE54BC50FFCF5100C73
-:10E4C0001967FF0F4C67F2A0D6143594C1F7FF31DE
-:10E4D000BBD299DFE5DF32E8997F4BD9571CC9A43D
-:10E4E0005DE72D9D85FB9CCEF8F30696CF34EF813A
-:10E4F0002A7CFFF20623CEEFCC4109F9FCCC66362C
-:10E50000FF79EBCD1EC8BBBEC1CEF6B3F368BF9E8C
-:10E51000E77FE34730AF0F37DDEF05FFFC87847DF2
-:10E520002768637EA80F6D2C4E0E6D619C0FF7F669
-:10E53000413BA67AFDFC899867B659E7053B821CEA
-:10E540004C44FFCEBCCDF7FE7614F88F26DF59027F
-:10E5500078B8C1BE240DFC25B49D3FC4EC6296BFC3
-:10E560009B32F2195887377C39B6E306B09736D319
-:10E570007592C7F2E3C14E3FB2F946B44BE74DB2D4
-:10E58000D8615E9E4D4F8F07FDF1E1A40C19E7B3F2
-:10E590005B2236C0837D691ABC9F2729FE9EF8E95D
-:10E5A000A334E6672BCBB57A23D0EF0F3AE413BA46
-:10E5B000AE6E07FD59BB598F76EF91C96FFF71BAE7
-:10E5C000A36B5DCDD3B5DE3E3ACEEEA9DF748BE012
-:10E5D00013122985FD14C389767D19739715003CA4
-:10E5E000DA75366F4543018B577DB7F54636B1F581
-:10E5F00056932E91AFE5EFB4DE7E90EEBCFAF54671
-:10E60000B25254FBA8EE722D88ED84BFDFE425BE24
-:10E61000A7AD18D7F549E0974B57B07E533ADBCFFB
-:10E62000287F5DBCE3755817E9819500472EF115E9
-:10E63000031F7962B672382B64E5761CD9C4EC6688
-:10E64000B0EF81DEEB9CE49935717E87F5E9EC3C17
-:10E650001B5DFF8FC03897DEFAC751A04F5DCE8596
-:10E66000212CDEF919C607ADED2CAE6CF5C630DEF7
-:10E67000AE77F891FF845CAFF732BDA39DD79FD3EF
-:10E68000D9F98B7A470CC739E062EB50F8DB372EAB
-:10E69000B5A09F74A32364667E852001BD3471A458
-:10E6A0008EC5C5B89D750BF73F9A4A5E26100F239D
-:10E6B0006358DED7EB252F2BA9B4FCDB91E3BC78A4
-:10E6C000DEAEE4A9967C98F7183DAFEF138479FF8E
-:10E6D000CE5786F58B5D3A0FACEB89252C7F915494
-:10E6E00027A1BFE4F5920F1CB3E3E0F71393C74AE9
-:10E6F000F96432DDE4C4E7DB7D6F8CD9638DE3AF71
-:10E700004F5AA54A66EF7A92A70E66FE10D4C3252B
-:10E710006A7C2C7619F0BB6BD3CAF6039E6FB89E49
-:10E72000D1E3DC6E6308E4DF397E7E458BBF63E9AD
-:10E73000DCCF7A77A12A3EEF308473403F9E97D496
-:10E74000FD16B4E8303E3EBF452221FABD733B5F63
-:10E75000C80139FED1D32FE4CC8C8347DB4F3CDF9B
-:10E760004857FB01B57EDDDEFCB9A2DDE5F524608E
-:10E77000EAD3D5FE72F5DFD09F3BB39DFB837DBE10
-:10E78000BE0ED807F1F6DAF1FECEF943DA27A1BFC3
-:10E7900043F8334F1D7B0A22279DF433B7E7C9F1B5
-:10E7A000F98AE2399AD36D0AD08D4EC5DCC2CABD52
-:10E7B000D1ABB7F5F8643A8343D0ED544B9F64C0B6
-:10E7C000A3A1CEAA10768EAC10ECF4CDC4E285F5F0
-:10E7D00064C87059417E8973F85F98D9D361A14F9D
-:10E7E0006AAF65671462BFFB653FE6C57D21B7E28E
-:10E7F00039C2FB750D986FFD15FF5E96CDBF672E74
-:10E80000EE4FC2987F4D5AD4F84D6B62FA2356658D
-:10E81000403D25F07CEDCCFB709FDA037DD603DF15
-:10E82000648C64EFAE71E571BF4614E304E691C4F5
-:10E8300006FBF9A651418447D0A79E352752BB84D9
-:10E840007632E4B524A4603C34C89FC49A423AE3CB
-:10E8500003097C5F4B34F1002AB682D04EC00962B6
-:10E860000CF2631EB5875B0B4A309E8AF6278C0B31
-:10E87000EF671629E84F87768661DFCE6F9D7CC9EA
-:10E88000F30C278AF7D5961EE30F13E1BC0E6D9F9C
-:10E890004DF520D87FC4AB579DD7D944ED66D88FAE
-:10E8A00089F8AE4E0E17BB701FD21105FF88A1D498
-:10E8B000E401BD9AA00B1702DDB4F15EDA2E8FE5FC
-:10E8C0001964D941AF88F338754BC7FA21DFBDD33E
-:10E8D000CE38C8F647750F94E1FBB1EDCC7F5EDF13
-:10E8E00062C4F384F5FB248C57D5F90D2113FA315A
-:10E8F0003C8D40AF20B5C360DFD86667F9516D37F6
-:10E90000D9BC4112EFBF8E6E7910FDD7568CD3FD66
-:10E91000B3F1CBCB89140143E3E253C926A647B830
-:10E920007F3B8DF393A0BF58CF22DE9958E4CF03ED
-:10E930008BFBD7EB66FFC6E2FC2E7921D73E0C7924
-:10E940001FBDE7851CBD05F2464C60CDF37A008BF8
-:10E95000EACDCEF375660FC6B53AEBE15E04D33E61
-:10E9600089F7FFC12DE3FA62FE283F5F77DD5AC8C1
-:10E97000637ED44C54DF8B874FD18CAFA7E35B3DD4
-:10E98000A2FD3D378F5330BECBCB2FFDD847E17F63
-:10E9900054AF1E0F59509C0734757DAF3233E1E1FF
-:10E9A000B563BAF437D5E7CB5DCE2E3DFED0DB1391
-:10E9B0005B877A607D7D8AF9B8421FD73B589E8875
-:10E9C000566EAD7149C2FE1D0F2A76D5B42ABC47DA
-:10E9D000A033BEDB3EC907F72988F86EFD323FE65B
-:10E9E000E582FE77A1FEBF70E61001FBF21CDAFFA4
-:10E9F000F55714E60FA2768444F9D0D45E867E4F94
-:10EA0000483705BD29E8BF80EB25B0D581BFEB377E
-:10EA1000DDF1B40EEC6597EF491C97EF03B5F08676
-:10EA20005DCC5EAF2F2CDF00F2806C9708E8ED35EF
-:10EA3000859FA09D51B77FDC88F8BCF2F9FB9E60F2
-:10EA400079C93BF43DCE3FECD2A17CABDBFF1CFA95
-:10EA500033CF85D871966A25B47A34F855AA65B053
-:10EA6000B44849A86A3AEAFF69741EE03704BD0356
-:10EA700076CA8E2941C873AFA7FF01CA36FAE7A24A
-:10EA8000BDBF719AC90AF19AFAC2998B703DD82C10
-:10EA90003E98BF16CECEF8F00316F437AED9A7AF26
-:10EAA00004BBA994DA49BFA2F066A74CA8F452B9F6
-:10EAB00094A9DB53FC032BC4D57BD6C35333981ED8
-:10EAC0006E96FCC15B4B300F92C4E7E9E4EE63F64F
-:10EAD000D8AB2E66BF89F7AF42E223C5E79860C77F
-:10EAE00058E0B997946802D8C5F5C4F731EC73893A
-:10EAF000DFEA8171E02606B0B31CCB3DE8CF3539A3
-:10EB0000A23F1E8A769382FB0CB18FB8B49FF9BFE7
-:10EB100046B9036F021D4B75D1C76F05BCFD989DAB
-:10EB2000F3250A93373953ACC3C05F6576441FAFF2
-:10EB3000F4607E0DFA1F92AF6B463ABCE42036C0FB
-:10EB4000CFD8609522C5E9192137C6769EA771A056
-:10EB50009FB49C8B977E945A674CC8A2CD5FA776D2
-:10EB6000D905C7FE31558197C25E904D01DCCF5467
-:10EB70004CA3FB43E0CB55B1A332F8E51D1D682F34
-:10EB8000D68625FC4E6DE12F31FF6D21CFB3EACC47
-:10EB90007752A298FF75C995C0F56333E34BD281D4
-:10EBA000FB5FB28BE19FEA4DCC0BEBB2DB1BB19D5F
-:10EBB00018CFC0E309B5DC5F431185F57F7589780F
-:10EBC000C20AEEAF12796CECBB44F194C6FB17D6C7
-:10EBD0004DA29A04E1F22401BCBF30FB65376D7F82
-:10EBE000AA5A66FEEC9684101C0E5D2775F8C0EFDD
-:10EBF000182CEEF91C4CBA5BE279B2B1F1E8EFDF08
-:10EC0000DF5B9E2CCB8BDD306220E69597ECFB78AA
-:10EC10003CF007A924B81EA9BCB8AA3CD92C375B84
-:10EC200047FFCFE4C97A25DF36FA1CECB6ABF364B4
-:10EC3000BD8C5E227EA9CD8FBDE48E282C9F2DBA7F
-:10EC4000E569D0BBFB8C98273771DFAB27C17F39D3
-:10EC5000D144C218CFD5D80FAFA54E29053A5DBE15
-:10EC60007866CB4A02F9D5CF7B59DE9DDA1EE8CD16
-:10EC7000FEC79846DC3EB1D2FDEFB5FF85BCAEE7DE
-:10EC8000FBA9F352EC910298DF419DADA77331B718
-:10EC900089EFF796E7D1DE739E8738775519CD5304
-:10ECA000C5A7EEE91CEFBBC5BB66820FBA87789794
-:10ECB000C2F3B71489890E926D50C5BB147B416FA6
-:10ECC000F1AE08D63FD71FEB1FEA16EF627905CDEC
-:10ECD00007D33D60DFD73863CF3CE381F10C384E7A
-:10ECE000F3FE8410E4B93773FCD75C7DBCEB41774D
-:10ECF0000FF1AEADDC7EFBA0508E18285EB7120679
-:10ED00007FB05DC4BD64DCC7C61ECE16F063FDE5F2
-:10ED10008707A1BF68968867BDC4FC68B378DCEA42
-:10ED200083C90598E7D51B9E67B5A8E3020F039E2C
-:10ED30009DE8E7437FFC7DFF3109FD5373C18FDF01
-:10ED4000A7EB1C04E1FE3C4F0B3BDFEED921853CD9
-:10ED50002CAE6292D136B4C9F07E2115A31B41F4CA
-:10ED60000629D75C435F4B146BB4DED34CCBD4E89D
-:10ED700057562B41176DB7F56402FACF1E72781003
-:10ED8000DE879A597C39B8560AF563E3E2BD61C162
-:10ED900066D907E3EC7633BFD32B6EA6FF3C9AFB14
-:10EDA000089AF53C4ECCBFD748E4083C65893D1F26
-:10EDB000B229953DD90F62BC667D83A90CF09DCD2B
-:10EDC000EE27F9DCE09B86FEE59402BC87A839B10A
-:10EDD000A1A592D5E39AFDDC1CF363FD750A3348C7
-:10EDE000892705E07DCACDEC1B2D9EE7B4AACBDABE
-:10EDF000F88EF6DCD52C12E8EFEED3FD5CD2536E24
-:10EE0000A6FF3E5F93C7E9E2C57849B3DEF3461E2D
-:10EE1000F0FB6A76CF506316C39B9CCD9EF9F60A31
-:10EE2000BC0F8ED8B91D4718FCF9D73924580FCD1F
-:10EE300076C6B7FF2ADC5A785F771730FCDAD97AC2
-:10EE40006D5E2D8518BE18DC57EB1739FF6F968B5A
-:10EE50001F48DE672279D80FE542F0613DAEBB5313
-:10EE60002494C9F2266D283767F27DEE675CCF6D7A
-:10EE7000ACCE4F8238E8ACB3ABF0BEA0B153AC0817
-:10EE80007FDD4B66DCC7D52E8BE6003F6BF108D0EB
-:10EE90002A429ED2FA990EC2EE996951C7F5B4F191
-:10EEA000DA608A5F8678505D79B400E2464FC81F09
-:10EEB000EC7995C935D4AB75CB62CF809F796A4A1E
-:10EEC000C09C41F173E181B7C74B1EEC8EF2EDF2AD
-:10EED000C1FE78BE7066B3FABC1659AB8E1B929613
-:10EEE00014762EAD4DFD1ECE27A9FA758B2332BBAD
-:10EEF000669D213000ECCE1BAE67791217E7CB047C
-:10EF0000E879D14C787C5EC8596F41BC1E28E07608
-:10EF10006F77BAD27680679E172ADAD7025D293DCD
-:10EF20006B385D2F3E774D01D0F5C29E6B0A80AEE7
-:10EF3000EBF4AD3E58179F390303011FA7C7F9D162
-:10EF40002E1479B057CB6FA332FE67F5F078819716
-:10EF5000EFA887E12FDE5FF2D23F58BE6AB09D9DD9
-:10EF60004FEDF2D39DC37BB62E5F912590C3BD8D2F
-:10EF70007792EF935C261204FBABB43C8AFD4AFF08
-:10EF80002613B00385FDAB857F3AC7DF820CDF4BCC
-:10EF90002EC023F7EB56F3B14DA14F999DBD5D42B5
-:10EFA000BFADC9134C1A8DFBAA39C37528577E858E
-:10EFB000E72048BB6483FDC9FCED8D587F69DF2CD9
-:10EFC000AC974D9108ECC36A693D94578D51E73574
-:10EFD000EBF71647E2F7BD148E03B09F4970C40CDF
-:10EFE000C09F7560575310EB14E6DFAE7310F4AB9F
-:10EFF00094EC53EF1345DC76A39FDDE3B2B15DC221
-:10F00000FB9CD20C81BC2CA0AB267E7B7F866F1D27
-:10F01000AC571147BFCDE97B2083E597E5009E8281
-:10F02000190C9F51BD38AFA73E4F78ECD0ED680763
-:10F03000FD85F8937BCE370BA9E2EB73F979CFB955
-:10F04000FCBC27C8E788463EC7976BE2F2CD223D5D
-:10F05000E50DC4E59BC5F78BCF378BA8E41A5BFFA2
-:10F06000E9BAC518D7AEA77CBE7458171FD610FED4
-:10F07000B73EF6019E6BD961447F5A0DCF33ADAFD9
-:10F080003E85FB947A3827C3D623CBC7E6F71CD43A
-:10F09000D0FD1FE6DB86D5F9A8BB7B951BFF77FC6F
-:10F0A000E4FB843CE0EB51CC4BCCA3A65D62EB4788
-:10F0B00003A776DFABF5778B7DEBD5CAA5E3FFC35E
-:10F0C00072E9AD7F935CEA1637E81B4BF2FE1BE258
-:10F0D000061F795AD3C095D822317E1DAFB3FA5896
-:10F0E0005C52C7F216B4F15ACF788C430A3FADE9AF
-:10F0F000795D68451EB6C7386CEDC144CC23A8F6CF
-:10F1000054A39DAD8D4F2E207BC60309FE428EE396
-:10F1100079AC7F351F806476E603E47DC77C0063AD
-:10F12000E677884FBE6CFD343510C727E545D460BF
-:10F130002FEA3D5FCB99C9F82E81E78D989420B1D5
-:10F14000C7F5EFAD5F7626CB037B99E7193D9A981B
-:10F1500080E7F65D0676FEC025B37CA8332E7F6E71
-:10F16000E608D0038C8E3FD97F0781FCC29FE8C39D
-:10F17000788E3E586BF582FE127E2631FE83DCCF00
-:10F1800072B5EBA724F3DFBB7EBE4D6E5C2FBE775E
-:10F19000B5F1B5F5140771EB4ABB0E7AEBD79B5C62
-:10F1A000B935D33F2113E5966F08C629AE521E2507
-:10F1B0009450790DFA79AFD103FB05133F2743D65D
-:10F1C000BA55FBED598F66A3DEBA6866FB07719EE0
-:10F1D00047CC7F66AFF8FEE7ECBBE34EFF6C98CF01
-:10F1E000E9321F9E07782891E995D84E9617A43DDD
-:10F1F000D7A2D527E25C86F8DE7DFF667EF8AEF208
-:10F20000B4497CFF5F94A754BFA27FA5D7386CB7E1
-:10F21000FE419E9FD9E1E3F1293CE720E0AAEF609F
-:10F22000F9748F674A2A7FF37D5CFE9FCCF4B501A9
-:10F230001D2EBC653241DCB3A484C9CF3ABF15E3AF
-:10F24000067561964753B78CE03E5F9C5FCD4B0FD0
-:10F250006C0139F5D0DB56BC77B46EDFD6967CCC2A
-:10F260002F08A05D77E92DF6FE445A601B8C5FBF26
-:10F270002CAA8A4F947EFDE9AACA128417F7E90ED8
-:10F28000A3FA5CD0914CB6FF16CF439DF8A5FB12B4
-:10F29000DAEF4235CBDFAE77F86C659857C0FCDF0C
-:10F2A000099E0EF45BD7ED452541309914EA1FCC39
-:10F2B00042BEA9DB5B568CF70884CDC578FFCC3BFA
-:10F2C00056DC5F5D782023A463FEF2FD006F624987
-:10F2D000E826B02F73E977C0FF7D61CF4DC5E80FF9
-:10F2E000D4AC3BB1DE3ACF83DE650A35495DEB71C4
-:10F2F0009D9EE947A1D77682318B79153C2FB07D51
-:10F30000129963ED2A5B1DEA7CC90519E376023C7C
-:10F310003B33591E8988A3E799E8EE33BF3B1FE6CC
-:10F32000F138FA249EFF4082A6AEBC87FC6F8FA303
-:10F330000BF84459C4D113AE30FB36DF6640BE48EB
-:10F340006C61728350BE00FB7A4CAC632C9CC3EAA8
-:10F35000DB161903F84A06F463FE69F4C743215E1D
-:10F3600091AA8C8178C596A5C30E9B1CE03FEAB894
-:10F370000E48E369B595C3D6322FDD7F06F59ED2E0
-:10F380005008FC5FFE073DCB535C9D80FABE2DA765
-:10F3900006F3142FBD6D549DBFD13E8364850BFCD5
-:10F3A00044F92DBFC77841E25EA9C7FCD37E60F463
-:10F3B0008F60EDC1EF94D8D2111C097E9487257619
-:10F3C0007723855E72C1FE5F91C1EE98B58F9DE394
-:10F3D0009ED56A2F37A13C9558BC658C03E5A4B235
-:10F3E000FA6619F6674A23C17BD2B2B2D839817E58
-:10F3F0006D3619E8FEEB2F753DC6D112B2985E85C9
-:10F40000BC374057AD31761442FD22FE27F2DDC4F1
-:10F410007EA853BEF2FBC4853ED2DAB1DDEC57AE16
-:10F420008F3AED780D1FF7D64FF0B7E0E75FEB09A5
-:10F43000DA61BF964C78BE4BF075B3C8DFFF92F926
-:10F440007173793ECDA9357F1FC2EE0F14F1931071
-:10F45000CB83D247576522BEA2D70761DE7BED7210
-:10F460005D11FABFEA709CD5ECBEB3DC963E2B462C
-:10F4700096C0D3460005A70E2CCC857519A47CD068
-:10F48000AF073E3897C9F29694D5094837E531BCA5
-:10F49000D99928F634A49BF204A3CF69CEE7227E43
-:10F4A0002BFC94273303A3B39C71E7B2965AD8B9C7
-:10F4B0002C7EDE3771E9DBBBE1BCD316EE2F3EFCC0
-:10F4C000D220FCDD85CF572B12F88D3EB757E5C211
-:10F4D0007E6F1CA76BA2D2416CD678FE3C8CF9B231
-:10F4E000F90759DE9FC2EF4F52563BB6023EBDA907
-:10F4F00001CC0BBEAE39823F59F092ED34C6E5A87F
-:10F500005D84E79FCFED97845DA4D28762BFA6DDBF
-:10F51000874DCFFAEFB5936667A9F71557BDBF22A0
-:10F52000EA7D66677BB16FD4EE2334FD7BB37F88C1
-:10F530002FA8CA8BB99FE7450BFD9EC165A3C8974D
-:10F54000E93CBF4C42663807910CB9AF4CAF63DE63
-:10F55000D07AC9E2053B499B2FD499C7431AFAB325
-:10F560003C9286A1EC5E8A866BE029F289CC904FB2
-:10F57000129FB79AC8F281CC904F42DF37F57ADEFE
-:10F58000D9D308DF6FFB914D9C77667EF64AC2E3C4
-:10F590000CDBF03C74ECB62C3C5F33B692F9EF52C6
-:10F5A000FC0619F8F2F9AF743E90BB31BA6EC1BED9
-:10F5B0004AE9EB7383BD65A6F590A7D279DEB98AD7
-:10F5C000F478DE59E43389F86E46FF7512E89FCE71
-:10F5D0003C93FAAE73D0F0DDB6451EF40F77E63DEE
-:10F5E0007D9FE03CCB859C31A9E997E463ED92A631
-:10F5F00019D0CE4893033B318EB7B1C38CFE8AAC91
-:10F600007CE4ABA69121BC3F37A5A815FDAF2B53D9
-:10F610007DBBB24674F18F808FAC67F3BF0CE7BC43
-:10F62000A4AEEF5E9EFFB71CB0A7CADB8D8C0F3572
-:10F63000706CECBC6F857E873E0F6531FA7B35F6CA
-:10F64000AD781E12FCCEE5B0F87E6FF314FCF86DB9
-:10F6500076BB96BF82E59C3EEF99432C5F49CD5F18
-:10F660008797570E3F4D65C991E57E7C5E364B61AD
-:10F670001DE4159963334002FE38BBFE7B700FC753
-:10F68000E5C4580EDCE3F178CE6DB7C23D1D979D01
-:10F69000B1F7A0FC4CF643ACDC2FB605EEF568CF15
-:10F6A0004E6465F85606216F6D926E0D5AF11EADCF
-:10F6B000551DA09F4A34F9299AFB07208F12EF4B62
-:10F6C000B0327AA6F33C5652C1ED77882CD17293B2
-:10F6D000BBD80BF90756E2D9DB01F55946764F0145
-:10F6E0006179534DFDF2589E03E77792C5FDCF2413
-:10F6F0001A04FE6DCAB363FF4E79BDD7C8E34EEC62
-:10F70000FB279E63E7CB447E2E21B66CB07BAC1EFC
-:10F71000A22A8BFB3B8862CB86F3FA4DC2AFC7CBE4
-:10F72000EF5A027FCF8AB38B4E8CBBBF087FFFE3BB
-:10F73000F907FBC27C6F34A8EF4F16CF65394CFE3A
-:10F740005EE6F70CB659024A362D9F4C98311EAE34
-:10F750006E9D965A66B0A39DB65307F2C8C9F9C20A
-:10F760003E95C167AFF04BF0BB1BE29E3F67404147
-:10F770007F0009B4E9407F3A4FFB310FB0C614CB8C
-:10F7800051F2C1AB1FB065431CB0EAFDFB300E98CF
-:10F7900071E23DC8DB38A16F1D9B04FA228FDF03A5
-:10F7A00041377E415A3E9A998BFBBECE7B41FB4945
-:10F7B000281F264E65E7562790B082FE171B3B4751
-:10F7C00035BE24CFDB44BF3791E77D8C3FE94F0244
-:10F7D0003FC0F83BA20A8BB7C494F83C0BF1242E2F
-:10F7E000BD277E1DDCE4892B13B84F585DBEC5AB29
-:10F7F0002EDF3AF2CBFEF1E564E21B04F37C518A82
-:10F80000E239E4E0286263F362F9843FE3FBB64146
-:10F810002E62CA857C478714847DC1A01732308E42
-:10F82000F2C24882E5B41DA66DA6F8F93F26B338AA
-:10F830002DF7738BDF0D823AD0ABCFBF9586F84A98
-:10F84000B3CA284FC1030EFC569A69B2807CD771A7
-:10F85000392FCE6D8F4B32E17DAF4D8BD8EF0D68D8
-:10F86000EFBB6CD2DB0E011D9B3EA273A0DFD99EC5
-:10F870006888C849402F420C8E2E792CF807C6BBE9
-:10F880001EF87E04FB5D27CAE57DE3EF1B6F723235
-:10F89000589B7EA4F0F81CFB7D89C2CEDF9BA0CBD9
-:10F8A0008EB6079B92E03A61F1B16C314FA2F8A09D
-:10F8B000BD9B88323B9F95C6CBE29E4D42CA14BC8D
-:10F8C000674712ED1AB1FC246F27B5BFFA57E08FD6
-:10F8D000BE49743EF4D994CDE4C453F289F5C827E7
-:10F8E000D68007F8C49BD0F379A1BA6CB66EC62552
-:10F8F0008D7441DE4093DBEB02BB4AE0A7F33D1F72
-:10F9000057D48BEF79537B1EB7898F1BE6E78DB5F4
-:10F91000F53FCA66765BE7F87A3AAEF51BBEEB5464
-:10F920007FB7ABBEB77EECBD688F3F07550AEB8C47
-:10F93000E16D02CF732585EAFC1432D26B62F25E70
-:10F940009D8F72A3B4CC0DEBF326536D7B94F67FA1
-:10F9500095F3C98D72E0338837BC3AA3E008ACCF89
-:10F960004AB8D09E8E733389AC0266B95C16F889AA
-:10F97000BD0FCA8B75208FEA7481FE29B47C51DFDC
-:10F98000DA77511EAEAF27B34774874FF061279CDB
-:10F9900094FF80EE82FFB4700B3E20DF0B6342DFEA
-:10F9A0006612C1A78BB03C6AAABF58BEB427BB6B16
-:10F9B0005E9439C79B1AFA827E7FB53188F2E7469A
-:10F9C000FBE39837B63337B00BD6FDB4A11FE33D48
-:10F9D00039C45585F6168577F7FF24BC745DB9E107
-:10F9E000BDB00385BDD72D7FF823832A7F58C0A7DC
-:10F9F0005DC7028E7AC2EE3F1ADBBE15EDBBFAA9D7
-:10FA0000562F9CF3A887BCD8128C7F619EF101BE53
-:10FA10002F0B4A2CDFB79BBDD87B9E31BB0FA0D6E6
-:10FA2000C6EEC111F729DD9B2FEEC9617053F9C5F0
-:10FA3000EFC9C1725B9507F77F9D76E31C6687DE91
-:10FA4000506069867B07BBDF97C3FC7BE405A38717
-:10FA5000DB89A8BFDB12D9772E9A595E7B9C1C27C5
-:10FA6000525AD73D5EEBF4CC1EBC949DC7E278B2EF
-:10FA7000B714E8B111E256BAEE7EC8CF9C818F81EF
-:10FA80004FE614F972E0273D6619989F91F2D5A6CA
-:10FA90000E02E9710DDBE17ECB9B48C39B721FE434
-:10FAA000AB2F807FA60DFA98DD7BD9C55757185F1D
-:10FAB0000551087EDB3A7D2D3520E58CC03CEF7783
-:10FAC000EA4A20CE6844FC8BFC43EDFA8D83E7B410
-:10FAD0009EC1E3807B75293CE61C677778AE86BFC4
-:10FAE000E3F9289D303EEE8DCF21CF3F7158179F0F
-:10FAF0002793800BE0EFE4F755DE165D9F1EE0D6FE
-:10FB00005991EEB74F67F198FA0466A7425CC69D1B
-:10FB100006FE27F6FDDB5733FEB8DD6C447E99D434
-:10FB20005E8BF11752C1E2295EFA3F80671AF18DB0
-:10FB3000839FE698629B84E736A74E54C75BA699DD
-:10FB40006EC4F8CE6D84F9D36E9FAA57FDEEA0C0A7
-:10FB5000C334B2F663C8E798A6F9BD412D5EB4F18F
-:10FB60001A818FA691DFBCEEAFCD4974609CD8435B
-:10FB7000FA7FC7B84E790ECB9FBBAAB8CE117D0CC9
-:10FB8000CFEBBFE29CB769115D17FDFFB308EFE94A
-:10FB90001E97367FFB63B4FCD38D03B1FC4ADA5D5C
-:10FBA0004B4E40FD96022C57C81FCFC07BD34BA7AE
-:10FBB0004F80FBCD8F98D9382E4BA00D7EAFC2352C
-:10FBC000247F186CC92A0C316C77F3D0DAE19007E6
-:10FBD000536161E5E3C5FF6B1896F37979D88B0320
-:10FBE000A17C44FA78464F71A1418552047E97AAC0
-:10FBF0002285B59F386C6706F8092ACA597990B7EB
-:10FC00006C751FA8973F99D1933E6EE0F6B1B0B7DF
-:10FC1000FC7CBDBFE07BBF19CE87F9AD9217CE0546
-:10FC2000F847BECFEEC732B13C02BFAF5881FB13DD
-:10FC3000CB7DCCBF37D6DAE806F9F7BD80A104FC4E
-:10FC4000B8366B5E33FCBE40F2C8B21140EFB1D49F
-:10FC50000C03FD47D7D5125C57D77C9C93847688DC
-:10FC60007A5D09BE9D24D653857ADD5079F04346EE
-:10FC700047F57AA0E32E87F7D3AE55EBA54EF9AE44
-:10FC800059B75A7EEC55EF13B51CECD44FABC2C834
-:10FC90009759849DFFD90C7CCAD66F2BC061903BCD
-:10FCA0003CF03E57F20EC4C48A5EEC07011F983D3B
-:10FCB000645877B8E04F11F62283C0664B83EFB2E9
-:10FCC0007ADACF073F2226E0A2DF0F217E56317875
-:10FCD000364B0DFC7729985D2EF6BD7562BEFBD4C0
-:10FCE000F32DB5B073EC2E42E50EFAEE8B077E13C2
-:10FCF000DCF55CCF4E35F91F36D239DC669F857452
-:10FD0000BE83049F03FBA6C312F825D05B27070F11
-:10FD10004625F85D091FC693291D7F9513672F0897
-:10FD2000B8B4F8A8EB45AE6AE1D6E2A18B3E1D68F7
-:10FD30009FB9F9EFCF75CE4B339F267EFF7CACD8B1
-:10FD4000A8CA133D5EC5F260055CC72552887A5289
-:10FD5000B2601CB5D3EFA4956FBD9C6713FA59C070
-:10FD6000793F3F4FF585CCE4DEFDBA08C2995BD9F7
-:10FD700061063C7E92C3FC2E02FEA691416C679008
-:10FD8000A51EE3C49FE4C8C25FA6A2B7B8D74CC4FF
-:10FD9000B9045E1D064F16E67B6AF039D364EC3970
-:10FDA000AEAA8DBFF6D24EA2F8CB4CE98E67112FCA
-:10FDB000BB45EB87BB89F9A76EE17EB8B1950CFF17
-:10FDC000294B1371DF965272422183BBEE5D16F40C
-:10FDD00078C711F82A07E316D111E027787DC44FC0
-:10FDE000314E24EE37D4E2C792DB337E7A5B0FBD0F
-:10FDF000C1FFAEC56FCDA5E35C943AF01EB4BFBBA6
-:10FE00006C7CDC401EAC17BB2DAF0CFC0B54AE7EE3
-:10FE1000FD356C36A10AE8E70C38729DB03EFCE374
-:10FE200020F73AA532A067FE7982FEE1C57C9F38B3
-:10FE30008EEBF74F76B1F3F315BE014F8E01FBF356
-:10FE4000989E843C90C7CDF0F3C9261DEAF579AFA2
-:10FE50000D77817DFE01E7B7FEEB65D5EFD30D0889
-:10FE60005954F76C0CDA91A22A0F0E67A8DA0FDD4D
-:10FE700097AFAA2F8E0C54D50F3F364C551ED1315B
-:10FE80005AD5FE9A93E5AAF2A8E80455FB6BCF4E2B
-:10FE90005695AF8BDDA9BE2724E8EB284C83FBF9F0
-:10FEA000193E6EB83253D5FE7CD2F863B0EE66AF21
-:10FEB0006579DB6564A1AAFF425D0DE64393566652
-:10FEC000C734D0FF213D75772B982746EDF754C0F6
-:10FED000DB7AB59D53DDFED82A90B5DDEEA7D0D8EC
-:10FEE000335AFBA5BFA30AAE7726B7E6F2BC936BE5
-:10FEF000C835FCF74AB474C5F3FE9FBCA9C37DC4E2
-:10FF0000E2D7987DBF7837CB872B20FD92F11CD8A4
-:10FF1000311D094970EF41C3BA3152971DA3C58BFA
-:10FF2000D1A5A6B3D9A3A67342A19ACE895E359D69
-:10FF30009347AAE96CF7A9E99C5AA9A6B3D3AFA63F
-:10FF400073FA34359DDD01359D33ABD574CE6E50DB
-:10FF5000D33977A99AAE79C105AA7A2137FBB42C97
-:10FF600056BD6F92C2A5545292D9FE6ABCEFA15FF2
-:10FF7000EB0F7BE40F41FF20FD1F5BCF0D985F3F30
-:10FF800097D21FF2EBFF42D61E855094960FEAF6E9
-:10FF90003D8671B5EFCA078F6AE97F95F629D58747
-:10FFA0004F803CA176CC7A900FD3FAF37D87BF6760
-:10FFB0003B46C8AD78BB217E5FDD9B3CEBA627F9B5
-:10FFC0003EBB573DA9D967BF05D94D688FAF45BF27
-:10FFD000D674CED79FC2AB51E0577D16F5FF5B14A8
-:10FFE000909114AEB7006EFA9DB72C83D00F7217A4
-:10FFF00089E8F19E6BC8DCD4E17D9998875945ED7D
-:020000022000DC
-:100000007278CEE2F6C11CEE27F9CA183890CBFC04
-:1000100023B969F0DDAC0E76EEEB78EA55DD0BF135
-:100020007BF827F8DD73FD87619C0A9367C913F499
-:10003000D561EE7F221359FE2751FC83E3EF61EC7B
-:100040001A87C54D5F940201DC67BB4D5ED8670F10
-:10005000CA242637E83757281FE25427347A652008
-:10006000E791DD19E1C576C4572805E304DFF1BB4C
-:100070007FCAF59D047E10EDBF6DBE06437811F377
-:1000800027B0DF4B7993D3E5A9DB8D11D897093ED3
-:100090003A9930E3A8D383FEF033C86F77DCB40A13
-:1000A000CAD2E154CF620ADFE5AA28EEEF29FECFDB
-:1000B00001DE6A4C14FF748A17B303FD938119FCA7
-:1000C000A9DC49E91FDCD3792401CF58897DFF5D84
-:1000D0004BE05318E7B0DC91E3057C281D786E8F68
-:1000E00058D1B821170D3DFB03051ECA13B2EFC648
-:1000F0007B788D462FEC2FCA2546D7D3A9F7CC8025
-:10010000D8E21CD99F16D1A9E0963C00B7AD2AD7FA
-:100110004DF9F1FF00AA42FBD90080000000000069
-:100120001F8B080000000000000BE57D0B7854D504
-:10013000B5F03E7366CE4C924932492024848499AE
-:10014000843C20214C82202AE2F0088D1A30BC1415
-:1001500030E2E401843C2080DEC6963603E1A5420D
-:100160001B2C2A2ACA8040D102068B801AEC206AF6
-:10017000F16A356DB5A55AB90950E54D0C3E68EBED
-:10018000ADFF5A6BEF9D9973480AF6DEFB7DFDBE0D
-:100190003FDEDECD3EFBBDD6DA6BAFD7DE73DEE2EF
-:1001A000CD8C561963B6DE8CDD00A9D999531CC9D4
-:1001B000D8B7F8774B3065CCC718546954E09FBD69
-:1001C00020F723C5BFCDC5F81FE4F7FB62FC0F4144
-:1001D000DE6ABAF4C114C8770C36B9B740D1C6701C
-:1001E000E83A9FB1F7B11EF4FFB405F2B1F47D35E2
-:1001F0007E4F08E7ED131E33F91BA17DF198971789
-:10020000B2EB187B76BEDDADC258A5CCA931985FA4
-:1002100039F3682C8DB1BF8CFEFBC1362763FD9D81
-:10022000DEBECE618CDD1B674AF980E6E1CD9E041F
-:10023000F36623E3184BBC72FEC67530B6C6C4869F
-:100240003336D9C197301BD705EDA6308F05C79936
-:10025000C6BC161CF77717340F8B82D404E530DF49
-:10026000BB988FBECF607E4AEF6601AA7F0F6BA35B
-:10027000FC6F237293EB617E931ECF4C67D0E662D6
-:1002800069DB702CFF87D5EB76C2B83536EFBDBD84
-:10029000E0FBF964EF677D10EEEB39DCAF36DF4948
-:1002A0000A87DFC5FEC52370DDE36CCEEBF2521981
-:1002B0007BDDC42A9BED5036AE37CD9F991DE99367
-:1002C0000777D7CF32C6A05D6B67542E1B82798F1C
-:1002D0003D11D6FF3D81C2EF79AA8B709D05AA9D85
-:1002E000F502F8B73A55BF15C62C1C5DDA17D705CD
-:1002F0007F913EC0D3448FCA10CFBF5E0A5FA0DE9D
-:10030000AFF3543FD2C4C40DE34F63FBA2D1539665
-:1003100047C3FAC77FD3765D00D2C27E96E36D599C
-:100320007C8C6FE17F5FB28DE36220BD2D618F9980
-:10033000C1FC6F1BA02F2FCA81BC2D989FC8CCC1B8
-:100340007218F710C201E8A7FECF79A3DE0869C7CB
-:1003500058935A0CEB2E7146F6FA3402B283D8A0A9
-:100360006F71DE6A49B4D7DE337CBF6E708F7A035B
-:1003700068F276C553EE24BA706A48FF6566E6698E
-:10038000EEA6DDAE7445D00F60379EB13BC45C3B3A
-:100390008B2E691761BD4F3ABDF3B19F4513FE32F5
-:1003A0000BD7C7CCEC3743016EF3DF03B841F9F14B
-:1003B00006807C2663271B6CCC6365ECD30607E5BF
-:1003C0004F3524507AA6C149E9B9862C2ABFD0E01E
-:1003D000A6FC2167F1F7B1DFB2D59F9BBD398CAD8B
-:1003E0000A9378E4F3582CE87855F2F03FBA61BCF0
-:1003F00055EF5A285FD9DC341EC1B138F9F8B2087C
-:10040000F8BEF839C58DDFAB5B3C9A1DE633FB0DBA
-:10041000EF4A249FB9EFB64D04F0B1DACB0AF3E20C
-:10042000161A50BC02C71BF6E1C97884DF670D239A
-:10043000683EA71B3C341F4F4BFB5B71D0FE6C43E7
-:1004400021E53F72163F8CF53DEC730DEB4FD8D98B
-:100450006E4E82F2028FE2C1FD3DCAC3FC7EC0DF58
-:10046000068BD78B74B321D1E6C6FD3E7AF0E4A7A4
-:10047000EF83713FE9EF7D14E97A5A6C79411C7C76
-:100480009F38A2D48CF5EEFA8631CC4BFABEFABE78
-:10049000E6F0A8157839FF9A42703ABF2FFB8E9B81
-:1004A000A0BFD78EA84C8579755E36D1BC3A8F86B1
-:1004B000FB9912ACB7E82595E87AD160CDCF5C986E
-:1004C000CFEEC372709DD019AC3F4B71B27AA0BF12
-:1004D000B3BBBE9F807890E39F8D6DFEEA23E47BE3
-:1004E0009F70BEC758F3A74F225FEC97E07E08725B
-:1004F000172C6C3AED5356173119E86BBEC6BC3C4D
-:10050000EFCDC6FCD970766F31E487EF4E1A83FBCE
-:1005100008C7736606F95AC6EEC7537FE80C8EB754
-:10052000A379F6474F42FEBCDFE4B34443CA9A2F97
-:10053000BC827C79ABDDBD8DE13CCDE138CF872D30
-:100540007C5EBE6DE1EE6D4EECCF4F7C00CA352C6B
-:10055000AF79F189BEB88E5701062320FFEABA08A9
-:10056000E277AF5ADCC7EAB1DDD3BCBF9FFFE481BD
-:10057000E307305D5B9BFF00A4BF73C612BC2B1E5C
-:10058000993708DB6727017A803FFE62BF1208CBEC
-:10059000656CF0FA43CB1261BC211BDB4D7D21CD94
-:1005A000DBAA34629A9D5C784485FE8F3A9D348F35
-:1005B000A13B5D6A126ED7BEFE8F6E4923C02988AB
-:1005C000BF41027F39EB3F1FD317D25D7D9B17C51B
-:1005D00040F920A5F9CC5217D2F91FF2BD04BF266D
-:1005E000EAE7A59629BFBF9BE13A7C89369C77A9AB
-:1005F000E6A6F309966B81FCF9BD699B1F8235EE77
-:1006000033F936D3F95566736F43BC17FB9E407CB4
-:10061000D7427D1FE46BF37C51374279ED2703DC31
-:1006200040512CF999EF15223CE6EF7D747C5FA8D0
-:10063000777E24730309B0CA972E8DC7762C993123
-:100640006409E7F736C6CF84760FE78C1986F45530
-:10065000AC36D3386C011FE77171EEB136004EBC79
-:100660002055A8F7307CC6EFB12D31879258103F46
-:100670000B5A96BACCD0FE3AAFCDADE2BE71F912AC
-:10068000EBECC17314CEBFBFE17E4BD444BF8E29C7
-:1006900029C5DFE1FCD3C47926FB7B5C63BE30E86F
-:1006A0002719BE2B783E6BFCDCDE067CA53E3F782E
-:1006B0006EC3B8E1AE61D4DE837C38090EE93C98A4
-:1006C00067D2E3563A07AE75FC8B16FB6A05E876EF
-:1006D0004138E76363C4F93B3DAEF1601BACF760A2
-:1006E000B837DE05F5668B739F99DD4EE4EF5BC38B
-:1006F0003D7D70FC1A5B470AAE01CED524CCCF57A6
-:10070000BDFDE3D3E85CD5C933579B476BB8C785BC
-:10071000EDAFB5BE91DF2EFED2C4F2800E163F6A59
-:10072000257ED1887C19D6D51839DC867C83BD61BD
-:10073000AA790BCED99B79CBAEFE1647E6135F693B
-:1007400064AC5B78BD06FBDF0BFC2600E78417F882
-:10075000C0A8CB1D2AA7F7D6C3D1D7219F659E4835
-:10076000A09F5B2E9B9837E41C34F603F8F2201C04
-:1007700047B308E60D39573D2C46C37DCBECB1FF9E
-:10078000DABAC5FC470AFC8DEC3C1AC1EC080FF83C
-:100790006EEF795D07C5BA7E85EB82747B7AF16472
-:1007A00084FFCD5F38CCB8BE9BCD935250AE8179DB
-:1007B0004FC7798FFAC2A49FF737E1BAFCB5CEFFD5
-:1007C0007E85F94CB81F3FD7FCB81F5BF078043822
-:1007D000B6CCCBF1E3BEDFA7F1BC2F4A23B9B625D7
-:1007E00092F9908FB44C8AF7FB5CC80F19977B7B0A
-:1007F000335E1E26DACF88A7F67DAD0052E4077778
-:10080000878BFEEBDE198CE54B93888F345AFCAB5B
-:1008100053B1FF1FA9C4878F0ABEBD3E2670B70A19
-:10082000FDAEFF3C9EE13847592069018E53194EB9
-:100830007CF72693E9DE4976ACE7498C0578EFFB37
-:10084000874AE7C4FA3CC8DB896F4F6F86EFEB2716
-:100850007912C3B19F49F1269A8FCAEAE8BB8BB7D8
-:10086000FBC8C2EBCD14F8FA93C00FEC6BDAF7DEDD
-:10087000891166A4DB4DAEB247683F304FA202F348
-:100880007DB2229D21DF9C5975AB8BE8A5E971E211
-:100890005FD3050E647FD8C0361CE566FE3763F66D
-:1008A000B630C4E7B4CAB0763859D9D1CA65914ECA
-:1008B000683FCDAB06ACC04FD9D4024F975C978A46
-:1008C000E37A68DCDAE681692743E8B9CC0A7C027E
-:1008D000FA7F21CCFB04CDEB401E951F00A1E65B07
-:1008E000D84FC72BD277E3BE621571427F0994239C
-:1008F0001E5EEBB0919CDA133D3422FC87083A452A
-:10090000BC2CE17807798DF28DD307913EB3C9C233
-:10091000E9C6B7278CF05A38D94678EE9C1EBED966
-:100920000AE5F70ABED5383DDCA340BDC697AC7ECC
-:10093000938BF424AAE73B1849FDD6683C5FF36229
-:100940003AD1D33ECDFFDC762C7F2D8CE8A1268AD0
-:100950008F5BF34A92A0378F6B058E7BD04A745021
-:1009600013EE8CA6F2FF8C233A1967F3BE82F000D7
-:10097000BAAB4339A2460B64C4007C8F09BA3A066D
-:100980006D107FBEBA489A376D79C87B1B93B7202C
-:100990003EBD1A2F673F50A9FC98838F7F6C0D1FB7
-:1009A000BFE4A7D5EF32C0DBB1E2F189B3611EC766
-:1009B000EA22486EFC73BD1AD0A250EFE9782C03EE
-:1009C000EA5D587262F806987FDBB28F53903E4A18
-:1009D00096D51661BB92AA2513F1DCEC695F96D41B
-:1009E000C0E60FD9C7275C9EDFE17ABE75793FC4A8
-:1009F0007DBF20A76D0ECACF17B4D66750FF888D74
-:100A0000F31EC5EF175FFE6C3B97AB3B32F03C9893
-:100A10006FE6F421CFD50582FE56A57A8FD1391124
-:100A20001E9885E747444E2BE7774BAE8DCF9F69E5
-:100A3000D9B64F8171AAC35BE653AAFA73B19FB3CB
-:100A40004A204A4923F879713F9D7304A210EE5E53
-:100A50001397E7AA77E8D7857F66985735FE03DABC
-:100A60005537AB9E30C435F36B38FF6AA605EBBB38
-:100A70008278827E084FCCFEE7593F04F8573D3715
-:100A8000301FF587EA98033FB989EA413BB94FD453
-:100A90002BF3723D57CE87AFEF9CA0FF7392FEA75A
-:100AA0006B529FA7F12FBCDC87C63F3BC99F81F0EB
-:100AB000BFA0887ACF59793DA00633CEF3054E4FBB
-:100AC0008F597CA670B20B30A2E7EAB8E6E10817AE
-:100AD000C987600E3E13D43FBB3B89EA4BBEC58A33
-:100AE00019C376D5BB13B770F94CE8B33851A85F7A
-:100AF000F50BDE3FE6711F9E793E498CC7E5692301
-:100B0000FE8CEB4D4E35D17A1F93FC3B52EE737742
-:100B1000C224807FE6064D57FF42A476AF07FA1D38
-:100B2000E8D77F97FD0F4C55483EEB6FC05B5FB534
-:100B3000E39015F7D3B38CF6AB715EEE54AE373E4F
-:100B4000FF7C179E548E371003257D38B91C6E41EB
-:100B500038FFA90B1FF725015FAD4618A406E1B3C6
-:100B60002FCF9B84FCFF02E6F15C88817C0ECA419A
-:100B70001CDE322FE16CA4B3657F9A93D406EDEFAF
-:100B800046F810BF77F7417AEC925F2CA08FE4A073
-:100B90003E5A39F4643AEAA97503E128E85ACF9C31
-:100BA0000D7936DC4F7337E6D9CA42F0D0B863E826
-:100BB0001127C0F9DC0EB31BD972A3D9FF1394A778
-:100BC0001B77A8CD3E46E53684EF39FBEBEF61BDE0
-:100BD000391B63F2515E96EDE76EB87F604508DC25
-:100BE000B377E8F130B8599F1F72409F9F8DBC6169
-:100BF000D8776F9717D0E7871ED1E75907600BF0BA
-:100C0000A0DA389EF68F701F71029EFAFB55377E70
-:100C1000EA6F9F3C6502CA171B55773A94F75F52FB
-:100C20007CFB60C89FDA38DB8D68AE547DF37F08AB
-:100C300038ACFC78FC113C0FCFB2E63F4C003CCC0A
-:100C40006959A7999DB86E3DDDEE33097A7D9EDB2B
-:100C5000D9E6F9F5E557EEEBA5028F2C2B949E8C87
-:100C6000788771EFF4C0846AEA170F3D094766651B
-:100C700011103AC0EC86E6751ACA6D571FC7C7E552
-:100C800041BBC789F0281DC1CB6EAC1FCB4E0C8574
-:100C90007FACF9ED789C77E9C30AC90DA5BFCC7C80
-:100CA00003CF81F63D336EA3F4CE425ABFB4E7CDF5
-:100CB0006D51029190778C701E688376B3FD8A1B0C
-:100CC000E75DB6DC1AE467F0BF8A358679AC0F2998
-:100CD00087F9CF3D70E8AF0AF45FB951DF6E1EF0BF
-:100CE00059E45F555BBFB5867E977AE38D2D9B55A2
-:100CF0005CF76C397FDF2886EBBA915765BD847C41
-:100D0000731233706E4CEB5DBC2315DBADE7ED80E9
-:100D10005D96E27A6BED9A13D75B6B63810898C797
-:100D20009148CDE380EF973644921D6D8E15E4C94E
-:100D30007C4A59583EB6734763BB4FDFE7F6B4DAD7
-:100D4000388EEFDA4D0AE951B568FCC4FCB33C3F7C
-:100D50008F05681D48279ED0F5F9F579D6C4F5AF03
-:100D60001A73E010C2A38AB571FD09F0E891F0038F
-:100D700078D5C03A8FC6A2BC6568CFDC5E1C77818F
-:100D80009DCB4F0B0E7C6B0D2D977AA0D453A57D78
-:100D900077534671388EB342F13C618379AE10F2DD
-:100DA000B56F5D18D1EFCCCDFCBC01393603E1B293
-:100DB0007E5DA21BE58C99209787E1BE99174EF5C1
-:100DC00040DE25BB4C07C8D55B5C58BF3980E7C601
-:100DD000FA475D244783FC4B70E9581BE6DFA2A06D
-:100DE0001CCCE598F5EB32490E7F559E536BB9DC70
-:100DF000D58D5C4CE5AC0F97E33FC2A584C8C15FBD
-:100E0000F4F67E9ADA3BB8AE8A659E443C772A2691
-:100E10006B26B457B1CAB86B921FB60939B203D664
-:100E20008FEB38A914BF650A9147BF16E7C8F031A8
-:100E30009EEDA29E1BEB5598263D740B8EF798C92C
-:100E400089E375C1DBE3C9C0799C5C17968F743662
-:100E50007C0CB7171DCBE3FC3DE23AE6F1E3799A4F
-:100E6000C6FB6569265D9A100EF407FD9C2CE0F622
-:100E7000EAC8EB8AC94E076735F179E33AECA29FDD
-:100E80000AADF83F6FEE663E123E6C1C97174E2E71
-:100E900054B6F079017E213FFC9130B2EF9D14E70A
-:100EA0008F8433D0CD30B2D30B7EB54ED0CB3A0B3E
-:100EB000A703DF3CAE3F05E985113DAC177AD64C60
-:100EC000815FB696CBB5402F1CCE6B1305BD30F6B7
-:100ED00037A487022797B3AF515F02BC0F48EB7D61
-:100EE000A5DE24F1CDCCFE61FFCC2F52BB7FD73ED7
-:100EF0001F9C9F552F3C1AC5A0DE697353BC1BDA9B
-:100F0000D76C5B11E581F494D917E580F14FFBD5DF
-:100F1000427F37F02E4D9376658F5D01FE331FFFC4
-:100F2000E94479E7E189B8BEAFB6591CC81216EC9E
-:100F3000B092FE347FEF3C92B321DFCEF3AB3E574D
-:100F4000317F406F3FAFFAF9A3F14E82B72FC994BA
-:100F500080692089413A7FABC51D40BBF407AA1BBD
-:100F60008601B9B96325CECFD81EE77119F0BDA0AF
-:100F7000592DD5A2AF2C5F20F8CB82BD0F7F8E7686
-:100F8000BD05067B7DA5F05B18EDF593D2227B7D38
-:100F90009A0DFFB89E5D8F7210C0C51DC07D0BF30A
-:100FA000492732E1F6DEC6E71ECF6D477961EB3B9C
-:100FB000514A4ED05E2FFD199DCDE59B5E71F6BC6A
-:100FC0001F2F08BB6D105F9C6F390F28C80340416D
-:100FD000E7698D25107513C0A366B385F84CCDAEB7
-:100FE00067B73F8974F6272B9DE7D5BBDEFCC38D21
-:100FF00028EFEEB1F42AE2CBB02BF1413C2D707218
-:101000003B99C44BD52FDFD49C83F9F725B141FC24
-:1010100054EF39A4B1C157C2716CF321ADCDDE0DCF
-:101020009E9ADBC7939DE8B9AF35DC07A75F53589D
-:101030001FD795ED2B37BF1985F218C209CF258927
-:10104000AF2EFC19EA43FF135FB98EEA3950AFE8BF
-:10105000097FF97876A05EBE3F92C5C0F8951F590A
-:10106000FD4588D7DD8BA3701D9F99EB389D3FBD53
-:10107000221EE5BA4A8B2FDE4129FF5EF9CCFD44E2
-:101080007F7395BA78470ED177A28964065F22AE46
-:101090006FF6C669B4BE39CC4BF457F9B45AEC8735
-:1010A000F44B332BDCD3CD3EF958F0A5CFB600522C
-:1010B000617D9FA1DD06F9C6EF54A1E72EA4F3FBE5
-:1010C0007EB156C61651FE4B21B7ED4E33497B9685
-:1010D0002D545F5CB075552BE2E74CB2A70FCE13D1
-:1010E000E0E013F052BE857ED5DF16F4E1F8614EE4
-:1010F000F370D10ECED1B1F81DEBB75A3C68F70EA4
-:101100006927F4393EFE7D627C987738EAAB9FC54B
-:1011100073B9DDB8BEB001920FB056164A5F3DED0F
-:10112000FBAD0F125D7DF101E72BF3FD930AA9BC26
-:10113000D512E883E5FE435315E20B5616E86E5FC1
-:101140006FB5887DAD2F87799A9550F8BEC6E5D0EA
-:101150003920770542F671906EB4E0775AF7236232
-:101160001D6DE44F937EB8B9821F18D76DE40F1F31
-:101170001AF8836CCF3676EF070AF2051F8D5B03F2
-:10118000E709CA19357FB2D2B951B3CB528CF039C5
-:10119000BBF3F01F66A21EDA2CF7B19EDF1AF771BF
-:1011A000E58BC3BADDC767D7E475BF8FE17BB7FBBB
-:1011B000788D42FCED7FCA6FE1A423BB414FFB75E4
-:1011C0006E0FFCF6DB34E11715F0FC92E544DF848A
-:1011D000858ED2FE841F035C253C8DFCF3F1342701
-:1011E000C1D7C83FE1EF03160247093F499F8C79F9
-:1011F000699C2E3A96742AE9B88B4E8DEBD5C3D1F3
-:10120000587E18F913CCA7F8650BB79FB528246F43
-:1012100043BBB792AEA37DEAA1E38F35BD95D42B36
-:1012200034EF37E49B0DF53D867CB1A1BED790AF7E
-:10123000D3D5AF397058E3FA414057CF5A7F3BE9D5
-:101240001957CA117EEEF7D9FBB9E643BAE8D7A120
-:10125000215FB42C63BE4894770FAA24EF5E7476A6
-:1012600044A15CB2228CCB6D171D221FC3F31DBDA0
-:10127000B595C817E5F78E306E27B958DC111513F0
-:10128000A2A7B7B7A851688F6DF3B3C2EEEC28647C
-:101290001905B8B6B19ECAB9FC56A0DA53EAD11EF8
-:1012A000DAA4BA814C58C5D2BBA228EEA125ED8E96
-:1012B000E9F07DF6DB2A850F5C0CE77605E6F3980E
-:1012C00031EEA09CA3909D62BEC746C2BACA5B78AD
-:1012D000FC41C51A3D7EE7D8A746079CC877F47144
-:1012E000027351AF4B437D4FFFBD8AAD217AAB32C4
-:1012F000EC0BAFB0D31AF745D900B12FF2589EB01E
-:10130000C7909F6391E0D7056ACE1DD301FE178F6A
-:10131000A8CC0AF9CE1695ADC4F5EE54C8DF830EFD
-:1013200001DC6FF3615FE27C247CCEE1BEC9EC5945
-:101330002E39F7D227C37F8874B2EFE3DCA7203DB4
-:10134000B7EF4F19AF627EFF1F533E6657D61FFBA4
-:10135000DA5F67211FBEF89A95217D5F7CEDD72962
-:101360006817BCF88A95F4E58BCBACDCDEFC5AA49C
-:101370001FFD911793B99CDB78F0EBDC363A779739
-:1013800013BED60ED0B8DCD4F2F76368AFEE6C8132
-:1013900055A13CF15A04ED9F05AF84913FFCE2C199
-:1013A000AF8787C64DFC4FD723FDDD1723D9F41730
-:1013B000916E855CBFE0D51B9E457F6EEDDE435A86
-:1013C00039948FFDD57FE722FFBCF82297932E58E2
-:1013D000DA9E415BE386AD373C624944FB1C74D620
-:1013E00017D0B5ED81C9B84FAE840B87C3458003D4
-:1013F000AE0BE052897CBF2778BCF06F0B8FCF67B4
-:10140000717E763D43FF6F102E0AF723B444FA6DC8
-:101410000AAD9F7F7FEDEB5CE437575BEF6F70BDEC
-:10142000BDFFFF59EFD97F5BFC727A5F3CC049F387
-:1014300033D2FD9574BDFF3F28BF3BD24DF3BDC6EF
-:10144000FD1E91FEEFBAFEFF1B7C0FFCB75DEFD5D2
-:10145000F0FDB6C077A403FD8A170FFE770AFB0ED6
-:10146000EB2E4CFF77DDD7FF7CDD525E1FA3BA8FDA
-:10147000E441FD7758F3076E17491FDDCA1DF707D2
-:10148000E3EF483F1ACBF8393DD6564DF2E6D87E09
-:101490006B492E6E64F9E487F0F553C91F43C117F9
-:1014A00000875F27E4F9C99F640EF45B0CF93149AA
-:1014B000B5149F65D41BC7864F284479F4F0529821
-:1014C00017F47338D2E4405FF1B87E6AC09A4B6972
-:1014D0003BA66FA5DC7E04E5967176BDFE74BB412C
-:1014E0001FBAD5A92F2F642FF642FF59618E85F9B7
-:1014F000613EE3B17E88DE3825DD41F0BA95352DB9
-:1015000077D8BF3B9CB6A5733DF94A38FC73B85DEC
-:101510000127A1279B457D23DCCCF6875AB19D99F5
-:1015200081DECBD74BFAB2D47BAF064F26F469B33A
-:10153000185AC2D7DC8FFB4943FA25B848B87F5701
-:10154000784B3C19E12EE12BE166C4433D1AA37AA6
-:1015500007E1DFCF9C67C67D77B390E3C7996378D7
-:10156000BE5FAB5A4CFBD1CFE9FC0BB719E593D169
-:10157000F6188AD764CEE418D46751C4FC3609E45F
-:10158000CE1131C315586F9299F9ACA06FA20F8D8F
-:10159000ECA80F9AFDCB5C380EB7D7269BB95D1A25
-:1015A00076B72F3C9FEA7B34C897FE6C2EF340FD44
-:1015B000D224E656787D161D4BE1684CC5B82C4800
-:1015C000B15D6934EFB7B40FF32FE3F824BC0CC05E
-:1015D0003495FAF5986279FBA87C6AEF33F1F61E30
-:1015E00033C67BA571FB7AC70A2BE91FA5AB9233E3
-:1015F000907F148DD1DB8D9333B89D59A6AB33F812
-:101600007E574DEE04948BCB960F247D480D2FAE64
-:101610007D09EDFDBB23881E4B57DE336118CE6F6D
-:10162000779C1BA77766E29EE1BCFE8CFB3F84EFB4
-:10163000DE1D61F47D6786F7683AF4774671CE7AED
-:10164000093E944D3BAC25C010DEE649E7D1FE379C
-:10165000D1B7E73DF4334E9CAA52FD898CC73DB209
-:10166000E511E48F9EE0FBDC9C00FD4D006503CBA3
-:10167000DBC31C290B61FEA5C2DE7B52EC17359C37
-:10168000795FB4E3BC923352E1FB04D67D1C706AEF
-:1016900086A83F46D988FEA1FE63B93D5ED6C77EC7
-:1016A000B0DF2C018F8BE9DCEE24F30057AA5FB189
-:1016B000DADA9E867ACF6A4B2013D25959632EE12B
-:1016C0003A8B52D9F80D08F70754B685E6DB514A34
-:1016D00076EEC82C27E2C10B244DF1854D2E27DA7A
-:1016E000BDDA473707D03FD0FE84CBDDE8242C534A
-:1016F0003C8ED4B3DA470706A05DBE238FFB198E5C
-:1017000039DA22513F2CB7DB283E47C6F5CC76F0BC
-:101710007DDEBFB16DEDF5A8773EAABAB7407EF683
-:10172000A3DCEFF217BBCDAFA0BEB69EEF53B6461B
-:101730001FC7C31C6EB2F794378DD650BFACB07BB9
-:10174000345C6776A6372603F7D13700BFE118C7A8
-:10175000C96833943695529C891A05FB0EF789D9CE
-:1017600019857AAF310E688188FB91F917C2BC7D6B
-:1017700033004E65D1CEDD482FC7EBD3C8EE3943D9
-:10178000D05D11C631A27FC2DC9688F379078DB88F
-:10179000307E51AC23C34EF41CC6100EED16470626
-:1017A000D277FB8A3013FAD98A9671BA867D66336E
-:1017B00043FB07CD2C1CFD06A7D279BF254BCDC519
-:1017C0009B21DFCFC6CC91B148577944D79BB3BC9E
-:1017D00017D3A1FF533F6223901ECAD7AC23FF8AC1
-:1017E000A40B666E1D1707E39CDAE6CA47BE29E91B
-:1017F0006873D6983C844B173D4C55880E203D9419
-:1018000046F430793896178D090C589483FA680D90
-:10181000F3E0F99EC0DC282774B20EF23F76DA3589
-:1018200027DAB9243F917C03F0EAB1C507E9603BB0
-:101830009CF7660B633B1A6C943EDFE06066E071D8
-:101840003B1B1228BFBBC149697343167D7FB1C1E1
-:101850004DF9BD0D2328BFAFC143F9030D8594BEDB
-:10186000D2504CDF255F02B8101F927C45F2A37264
-:10187000BBD68EFE48C9978C74330BC03B2A9FDAC7
-:1018800013DF93FC0ED761CA0FF22389DF54A5D86A
-:1018900097E0423ED63603F15FA09EDBB51FF5F21E
-:1018A0004ABB9BF474C6F95E27D02BC2254563075B
-:1018B000D0EEDAB8D0D3BECA1584FFDD950A3387DF
-:1018C000D0D53D7561CC1C726EDC5B1FA3CB97D469
-:1018D000FFFECD3ED0FF1DBDBC55487FC77EFCE955
-:1018E000D37F84EF9B7E7C261DF10DF3D8F6388ED6
-:1018F000BB24BC6B1EB1985F6E217F547F6907814A
-:101900003FC44B19E3FB6DD38FFF46FBBBBDDEEA43
-:101910004479F823C413C0F5CF024F65F556825FB2
-:10192000E98A13BBF6E33E5FA2119F2B5B2EF6E123
-:101930006A8067887FF77822237B0448D314AF7EC0
-:10194000FC475A2002FA3FAEF0FDAB805050827146
-:101950007FAB7F7D14F7BF527F84FCE75E9B3D40E9
-:101960007280CF722EB43FA5FE2DAAC7DAFAC5A0A9
-:10197000BD84CEB15BD0EFE8D19CB06EA469C45BEE
-:1019800059D6EB2C11FD264D8A03B74C85F85EB174
-:101990005AE1FE49B33B612AC87D8F64A884C7F72A
-:1019A000D2CDB42F733298885F68A2F349D26BC549
-:1019B0001A6887FBA2294F9B13C287CBC4F7F22C6E
-:1019C00013A5F2FB16D16FDFD579D3519EE88BE5D5
-:1019D0003998E64F47F8F6B58F372B21F8DF986135
-:1019E00016F3E0E3E7E06683FF7B282B559B9D839E
-:1019F000F8E1E7971CA72C2B7F25C67196AD198DB2
-:101A0000DC97355ADC09BDA0DEB6AE7E1C5C5EB04C
-:101A1000F178E59A1ECE0F693F3B85FFBC81D64D1C
-:101A200076DDAADDBFD88D71FC551F5B09BF55431C
-:101A300044FC548E7FF8143234EAEDD5E37EF1494C
-:101A400014F91FF6F2B84A48B93D754925B7BFBA2F
-:101A5000615F75E3FF7963F7C751DDDAA9F7AAD7AC
-:101A600064A75EA07C1385F2835C4FC1C12FE3693C
-:101A70001ECA65F2FF2C38B822BEBB7B37467B7589
-:101A8000973D5BD8ED8CE5467BDDD10CBD1D1B047D
-:101A900044BAC725ED754CCD8946FBFE97E29E47BB
-:101AA0004F7A8DB46F2FD8009DC4C1FE343BA3D1B3
-:101AB0005F75B10779DA99C9CFFBF3C21E7E71A7B2
-:101AC0004A7ACEC59D91B49FE6EFFCD95BE83F9C76
-:101AD000BF55A169D4B256821BC093D942CF318C75
-:101AE000378BBB72DE9DFEF4683C47AA7F11598795
-:101AF0007436AF59F16C83F974DA9CD1BD43E6F3C7
-:101B00008DA0B36A6BF37082B39C3FF2C5DEC17ADD
-:101B1000F35A7E46F663A87781E4A0172218BFFF28
-:101B2000D1F11ECEF3ECC6A16EF4FBCD6BDE339F7C
-:101B3000E4889D110E1481CE883861D98F2D938F42
-:101B400067CBE472CB59E10F3ABB5B257E86F3C4C9
-:101B5000FD7546D1C7E345897651026E2FE2FEEE50
-:101B60001DAC3FAFB93D6A00D4FFECC0EF294DC8B2
-:101B7000E47C609EBD3517CFDFCFF646903FEBB3D8
-:101B8000BD4F8D7F15C63BDF3CBA17EE07D97F46A8
-:101B9000A685EA9FDFA81622BC989FC7BDD4227CE9
-:101BA0008786CE336EB3CF15BAEF78DCCFD9BDBF01
-:101BB0008C32E504F1596BF3DA125371FF9416235A
-:101BC000DF38A538A99E65EF681FDE635AD092C73B
-:101BD000909E69DF2552FDD5A6907A9AC54D4CD1CD
-:101BE0007C60922789E02CEE21897879BC5747F7F1
-:101BF0008A26D9C83F316B88F3AEBB914FBE63E1F3
-:101C000078E9E77C1CE5B759EFC751DCD42297F39C
-:101C10002E9CFFE2DFAA14EF3B6BA8E003096DC323
-:101C2000306EB166B5C23CB0CE7617971B6AFC2AFF
-:101C3000F342BE2FD0830F4031313355F0D34006ED
-:101C4000DE077CB2D2E4D1E0FC3BA6319F8A76A3CA
-:101C500017793C734D2A8F1B7E12E91ED29AD84009
-:101C6000461CF4774EE0B366722003E3246A5E4CB0
-:101C7000A43889731AF75BE277F493D6E4437BA820
-:101C8000D74BC4C362FB9810FAA929733BB19E1AC3
-:101C9000EB76E6D971BE8E0B24C7BE14C9508E35C3
-:101CA000ED8FE4714E3F0FDB620DC15399A0B75E1B
-:101CB000028F6C268F877C4CC4633FB62DD18FFA80
-:101CC0009BACFF98C53B03E180EB40F97D9ED69429
-:101CD00081F2AD9CEFBCA8269AE73941DFF3C29BA5
-:101CE00078BCB4C6E329B13EE6DB2D8CE2B83B9E5E
-:101CF000B3523CC999C4D67D38FE99E706325C7F61
-:101D0000BBCB3FE7009583FC0878AB7ADE1AC0F5C1
-:101D10009C7E8EDB9B4F5BB83C767A528213F156E9
-:101D20003879C32CB2C76CB52A88F7D30AD312B05E
-:101D30007C5B6FB70FDB37D4539C7415B009BC8F35
-:101D4000036921DEAB39BD6D20C5879D7E5BC51B58
-:101D500051F87D357EF7B2A6593F4078ECE0FAD3D2
-:101D600099E7FF3E30F41E9A4CABB6EAE3E0249DBF
-:101D7000C8F246B12F1B059C5765F273AB36A2F92A
-:101D8000B1545A27873BE089F43E38F8239FBA0EB6
-:101D9000E320D215E41B4F025D3D8576851D5CBFB7
-:101DA0003AB3D34271E155FB233D1477B6EA7A1377
-:101DB000C541A85C0EAF3201F82855A8DFAAC95961
-:101DC00074DF17E04D7A6CC736558CC3981DD7BDAC
-:101DD0009DC7F916A1AC48E583A9FCB4C89FDE37BE
-:101DE00098E43AE8DF83F795AA7EF0430EC7299579
-:101DF000EF32B263D888BFD674F9714646E379579B
-:101E0000BBEAA668BC07C8DE5719CA2746385D3248
-:101E1000BBFB205FFD83E05FD5FB9ED6901F548BFC
-:101E2000FB21D5CF2BDC9F0CFB0CEF4956AFBCE957
-:101E300071A2CFF72C2C1DD673AEF96751A1F8080B
-:101E400008BED6555F7353FD6AA88FFD54AF7C273B
-:101E50008AE6B3DD427126463C5E73FBE7D56B6ACA
-:101E6000DF451FCDDC8E72C5FA59EB7F7C0CFD7F00
-:101E7000B133CCEDA3AFCD74AFECACA5790EAEFF12
-:101E8000ECAE30E2476763387FF80CF8A72F13E712
-:101E900071FB4F292EEB7753E83EDC5CBFBE5F3908
-:101EA000EE9BC8B7319E24CE1D8D717DB5EF73FEBC
-:101EB0000678B983DABF6FA1F6C6756C15FCBE6BE8
-:101EC0007FEE8A207A38DB97E3E5ECEE4C3A8FDA46
-:101ED00063389DC37C53F0FEDCD95D9979742F0D76
-:101EE000851BA0872AA1DF9E8D694E718494B75B04
-:101EF000849E16809A4837D806E4BEAA7A2E575593
-:101F0000DBD6507C08C6D50ECFA734608DBD323EDF
-:101F100016E895F4C77E597C7F311C2F5EC46F9301
-:101F2000BCD3AC21FFF60AB9B066A731BE9697FFC5
-:101F30005DEC4F9C6D2F19CF8B74E85328CEA47A9B
-:101F4000F9C27948E7D575EBEEC67D26E75F6D6689
-:101F500085A887B52B2ACDA33D8CDD3B19CF8DD02D
-:101F60007142E4362DABCB9ECA1CF124AFD2391698
-:101F70009EE5E474832726DE135DAEACA1715C524E
-:101F80009FE5EB927002706818D7D73E5A94F7B06D
-:101F90006E394FE3BAE57C52B2B89DA4DDE5FCE9A9
-:101FA00048C4F36F54BA4F7BE99BA1D1B1DDC8653A
-:101FB000C1735D0BC6B7C2FCB391F6D0EE92C9ED0A
-:101FC000A8D5183F0BF3CCD8A88FEBCEDAAACF0F49
-:101FD000DAA9CFE7ECD5E7735BF479F71BFA7C1C41
-:101FE0008EDB9BEBD9787F17F56C4C51CF765AB9C5
-:101FF0009E8D79D4B331453D1BBFA39E8D79D4B35B
-:10200000318F7A36E625BC51DFC63CEADB585E22CA
-:10201000E05423E224110F48EFECE530DD7D9F8B87
-:1020200007F93D0EA003BE6F6668B46F9EC41AA484
-:102030007770BB52DF293627C6FBFA62BDE3B38651
-:10204000E17D8FD695898837731BC59D2E7885C70E
-:102050009DD6E487D9D1BED1B6E2B39518CE393535
-:10206000D67B7B566FBCCFD9B11DE15B5B7F98EE11
-:10207000BDB72D75BE7F0BC71FD95958652CC94DEB
-:10208000A578CEC5F68C4763DC375BA38FF336C6E5
-:102090007D1BE3BD8D7420E5BD4D968E44E4EB279A
-:1020A0009EB3ADC1F99F0813F74FA6DB0CFE7E214E
-:1020B000A7AD55B6E0795D9315CBFD4947403EEF9E
-:1020C000E69C9569F9E5A1248777E5D72826BA1714
-:1020D00097104FE7D06231A714A5A37D15F2B97907
-:1020E000263A372F815C86E35DFA4025F921738318
-:1020F00049B79E81FE701D7D65EF8835DC6BE8ABCE
-:10210000AB3FE440AAE15EC3207D1CFDD4A587500F
-:10211000BF9FB266A8AE5E45F14D06388A790BF9CD
-:10212000B502CE0F0FACEFC9251B5210BF8BE77560
-:10213000B6AF42F9F4A530BA175689FF0FF86225F9
-:10214000F489F7192BF78AFBC0F5FA73B85C9C4346
-:102150009566E673C406E9B0D2C13C31D07EDEA0FC
-:10216000D6DC00EA156FFF7EB82315F58AD17D9085
-:102170001FA5583C14075BB3273D6629F4BB22CD4D
-:10218000FB14D2DDC9A6C33F29C1F3700FD7F74EA8
-:10219000ACF96514C589097A4BB138C211EF9B9B24
-:1021A000787C1CDAC7D4D8205D6C6E8A0B1F600F58
-:1021B000AE374807DF109E003FDC8E53F93AF93DF9
-:1021C0003A9BC57A472B3E94A7E5FA168973850D8D
-:1021D000E0FDDC27F227857E21D7796EE0A15C2720
-:1021E000DEBF683890A2223F37EDDC9E08A9DBEA0B
-:1021F000DD87FBAE7273FA1F47C238551FF2F5FC3C
-:1022000065FDD8A81B50FEDC657117417E55D3B320
-:102210001AEAD95566BF46F195CF6DD630BEF87B28
-:102220003B36D3F7393B4A299E722EAB23FDF394FC
-:102230007C7740C0A3728CB2D101F34E1AC8E5BEC0
-:10224000CA70EEBF03F9E84D7CF7E3D20E250FE329
-:1022500078A616EFD14AE1FBFB82CF18F749E7BB1E
-:10226000530A7A133CF87D8D0F1968F16957EE8B8C
-:1022700029975DB42FA65ECE26BD6C5A6020D77F0D
-:10228000730CFAEFBBFCDD85CE16BE0F2AB540AF4E
-:1022900029B84F5EB3909C5B0BE7CD887CD4AB191B
-:1022A000BB11D2E291AA8E5E178C8BD0D1F374163B
-:1022B000B24FA0BF3B316824243FB5284D57FFAE35
-:1022C000A9D906FACF0F96131FB95177BFAE7689F9
-:1022D000CFA9909C3946FF9DF13841C66ED3B5AF6A
-:1022E000659383F590BEB77239B8766FCC16B4F7A4
-:1022F000559AB8FE34DDCBBFCF3FC0BFB3E94CB772
-:102300000FFBA7B9FFC8CF450BF905A43D7D3AFEE9
-:10231000BB1BF8C349DE753F1CEFC5A33D42777F69
-:102320005AF80371DE88875A6137AACDE276A35A3C
-:102330005FAB86EF0E00FCCD71B154CF1687F191E3
-:102340004D0AD915315D42F192FA382CEC0FE318A1
-:10235000E71F514B719F18CB2BF1DD1FC4EF2B3CB6
-:10236000AE74EE06631CE41AF247CE477B5008DEDB
-:10237000EE1EE814F28A7F655F845F919247F72230
-:10238000771ED230CE6EEAD4983CDC3746FA927C87
-:102390001DF633E9DF9DEF1E26FAEAAC3413FD5E2D
-:1023A0000D0EF33DDC8E6AA4BB39AC55C37BE273E2
-:1023B000F62A6ED447B11EC2A32FD2A3011E71B15B
-:1023C00057C241C2A70B5E7B8D716E1C4E730F28E6
-:1023D000FE40377032CEBB27B8C9F5CCF17AC7239F
-:1023E0005F90EB9A8BF3C7FE61FED8BFF443B01148
-:1023F000C6FD9946F6A9F9C53C3ED6480F932F7302
-:10240000BBCB9D97CD944E2DD2EF476C87FB62DA04
-:10241000E5782AFFAEF4321FE6C9EF3F5D1B9DC889
-:102420007548BE1BDC0FFCDEC0D5DE0532DA1DE7C9
-:102430000E14F1C8C3D8305D3CB2E0ABC6F6C67826
-:1024400064290718CF97D24813C54D76DA5349BE91
-:10245000907CD62BCE0FEF8A2FA99E17EAF1D9C414
-:10246000EBCE1BAFB0FF2D8A4CA5F7185296C6C510
-:10247000239E4AC31C147F5FBA54A5B8E752A8E74D
-:102480000C914F562E4F4BC1F3E2F88399CFF84091
-:102490006E3FFE40AFF81130CE8915965E3667B0BC
-:1024A000DEF115052918A771629D75BABF1B78ADBD
-:1024B0001BC8CF87DA1F1FA5F3ECBCE9DDA8E9D064
-:1024C000BE66C54B5118E65FBD829FE303D3BC4D8A
-:1024D000037BE379BE79BB03E1E7D89C8B76DF4DC4
-:1024E000701C607B293F54AD28E883F245CD3F0E38
-:1024F0003FE3C07BD64B2DF1287F9EFE00CE438567
-:10250000CE33921B4E854117E44F8B243BC2298565
-:1025100079D0AF74CE74E8AB55A817E635670420C0
-:102520005D68F56E1A88F2FF8A67496EA97A686954
-:1025300086AA62BFE9D1DDD94D64BA5D9CDB28BFB4
-:10254000638AF23BC6C9A0FC8E7994DF3145F91D40
-:10255000BF2FD8A097FF5E10FE42694FEEDFD891E3
-:1025600087FE3BDF18965547E7AD3D0BE5F5C54ABD
-:10257000B81BF9D162949530FF4918E9B16C6B2210
-:102580003F6F059EEB6DDC6FF4B5B89F7B7307C89A
-:102590006421F479CB651B0BBD373B9AC5E8F26328
-:1025A0006D89BAFA050E97AEFC7B090375E5B73A5B
-:1025B000F374F9DBB36ED0D59FE01EADCBDF31E213
-:1025C000565DFD499E49BAFC94C219BAFAD38A4BAA
-:1025D00075E5774D9FA72B9FE15DA8CBDF5DF98067
-:1025E000AEFE3D754B75E55F9B4023057A6941BDA5
-:1025F000CB8AEFA7D828FDBEEA3023DF58FC9B74B6
-:102600003BE27BE458535D77F6FD53421E4ACFF61A
-:102610009C407A4916EFE3248B776EBE1AC8F19975
-:10262000C480AA48DF6D4D44FA35D633968F8C7836
-:10263000FD92137058FC7CF43433F08991D7BF3E7F
-:10264000340DF20F3E3F9EE76F7AFD97A9905FF73A
-:10265000FCC3D3CCC0A7460E79FD129627FCE276C8
-:102660009E9FC248F4787AD0DFA7FA70FEB7A4AE76
-:1026700071733B49B7F7CC658A70C0FBDA08074C29
-:102680000340BF98BE0EF48BE91B40BF15C09FDE10
-:1026900002FAC5F408E89FF8FD3F41FFC4F45DD09D
-:1026A0003F317D0FF44E4C5B41EFC4F4770DD329DD
-:1026B000FDA0C14BEDFED05049E9D1863AFAFE515A
-:1026C000433DA57F6EF0D1F7D841D28E1160BAFBA1
-:1026D00001E867447FE201CBB9503FB0F4574AFFAD
-:1026E00064631D6B8B407ED1668EF9D416F43BF685
-:1026F0006C0730B34F43E4B168E6491E44E3F77317
-:1027000090DF487CFF557F6FEA20E03B1FBAA6A40C
-:102710000F55F1DCAA7B13DDB21F8AFBF5C67EBF25
-:1027200012F4F1D7419E4C6C27FDEBD2BFDD15377B
-:1027300013E27F3785C4EBD05F48DC8DF483CB3860
-:102740009F9B6DFC9EB1F473CB781ED95FC1178C33
-:10275000F8C3A8D566925F22CD2C80FDCBB89D51E1
-:10276000B6E63C8C63185563A77BB57DE0BB964FFE
-:10277000F53C2AA45BFF0AF573837EF53E62FE50AA
-:102780004EF32FF8C24B76D85122AE00DBDB78B97E
-:102790000FDB8F42DBC27594127F7A1AEFEDE607EA
-:1027A000FDFC583F82D70F607F03FE06E34505F727
-:1027B0004D726C731EF2EBE4F976BA17BA7174803D
-:1027C000DEB322A313C0658AD49F6C222FFD793B10
-:1027D000FA901D69ACD8EBC39CDE1988CF62ABE3DD
-:1027E0009308DA6769C9689F9C24E4E77F82B75938
-:1027F000D84EC253E245E251E223247E8AF0D01340
-:102800005E8DF834E251E2AFE08B205E10AE57E20D
-:102810002D8857B4E7FEBBE0ED3A337FBFCC5A6357
-:10282000A377D1AE86C77B3BD8F868A8F295D3FBD7
-:1028300015F2CFD2CBCEB7305FCE468F47D4CAF297
-:102840006F7B28F77ED161890EC1F7CD02DF19AE0B
-:10285000EEEBCB7AF23D06D97F410FF5DF0993719C
-:10286000171E7BDEF060FCE3E2020EFF42974AF0A7
-:102870001F9B3397E46466E772A613FE43BE34FEE3
-:102880009B627AD7F24BB6133DB76C7C2FBD7C5A56
-:1028900068F05BDF26E4D2DB0C72A951AE7C71904C
-:1028A000F067BB98EB3BBE57F932E76BD7FA5E2572
-:1028B0007FEF749CD8674982CED29C2A1B8974C44E
-:1028C000BC744EBE81EF9DE6E2BBA03ECADFCAFCEF
-:1028D00094DECE0274BE4E00468CF93B18A37BE416
-:1028E00087232696E0DDB8B143C70EC0EF21EFB2D3
-:1028F000BD87F39BAF7AFFCB11F22EDBEBE39C7429
-:10290000BFF2755B1AC95FB80F2D21F6C0B7E17C25
-:102910001A00E7C76138BF307D13CEAF01B0DE5F6C
-:10292000C3F985F9DBB296326C37DEA98FDB91ED06
-:102930006F778C05C5A467F8DD9EFB723F84EF3B83
-:102940003199E3D07EFE4ECCF5E370BDEFC4F43197
-:10295000F1D4AA513A78FF80EEE443B90F82E38DB7
-:10296000A7F18CF095F034C251C2F75F80E7E5EE35
-:10297000E0F995909F3B6DBF8F4A4845FF5D947885
-:10298000C7F237B92AE44FE3D412315EF5269AE74D
-:10299000A8FA1B987928F96D7210AE35360E2FA360
-:1029A000DD8A6DED630A8DDF3DA379C3B2619CCFF3
-:1029B00036AA746FFCFC8B61648F3AE5E7F6B6DBF0
-:1029C000156F5436CCAF4675AEC1F747D93BFC9D69
-:1029D00033F6CDE194C991DF814EB7F2FBF635B6FF
-:1029E000F1DDE251EA53D12E0FED7326DE8B9472A6
-:1029F000453F2B7F9740BE5FD8939C313C9CF3C1F1
-:102A00007E56CEB7255EA11DE593A09FE1C0E7925B
-:102A10007E1A4EFA45636F4F06AE4FDA113AFB4508
-:102A2000F891DF8E0A64D3BB5C8547548A277E5DAC
-:102A3000C4777D2FBBCE9E0A789A94EE756793BEBD
-:102A4000F98D8A7CE65D58671CDA1F8E0CB593FE03
-:102A5000F81DF5D011D9825FE4B25CDD7D35497790
-:102A6000AA9DE2773A3FE0F7F116BDCDE33617F5C0
-:102A70005629FEDF1817378A65FC14ED8D637B59E4
-:102A8000DC7E6790BFC87780AC0926E60C91B3C3A3
-:102A90009CE1CC19329F88AC585D3ED2DD57573F40
-:102AA0007A44AAAE3CC63348571E5798AFCBF72E90
-:102AB000BE5157BFCFF431BA7CA2F7365DFDA4CA30
-:102AC000C9FA3CEE3B807B72DD4C5DBBFEF565BA1E
-:102AD0007A2E5F95AE9CF93CAD59F1C8C7F95FDA23
-:102AE000EA45BAF2A7A20A79FCB87D0EDD534C6F15
-:102AF000FA81AE3F89DFA4388E5FE6E4E7830FFEFC
-:102B000023BF85C0734182FEDC18EB18FD8683521B
-:102B1000BD5D23E92A71500FFCAB7450CBF474D027
-:102B20008BC7F114BC3DD489728C11FFE88F085D0E
-:102B300027FA2342E182FE88D03CFA2342EBA33FEE
-:102B400022B41CFD11A1E5438FE8F13FAC558FFF86
-:102B5000EB8F8EF9A778BAA14D4F0F463CDD744A32
-:102B60004F1FA3BCE10497B1208F21BD4B3C4D8783
-:102B7000FFE89C67C5D16837B88579E85EC0FF1665
-:102B8000BE5EC816F62381AF2FD99A61F8CEE5C58F
-:102B900052CEC77B3AE79FEBEF7909F9EE09E4F3F0
-:102BA000C3AEB403C87852DF188E4FDFB130E2579E
-:102BB0005F9BDA22F1FCF8BEDA4676F944D6F126BC
-:102BC000BE3FE3E8E53D84FCA80F460F40F993F3D0
-:102BD000EECCC3736ED6AFAC2928D7CCEACFDF13C7
-:102BE00064396DF44E8B9CCFAC241E7FF476B6E036
-:102BF000D36E1E87F46E36B7FF44BA1D14075D9A74
-:102C000023DEA131B3945983910EDF0DCB443A5B9F
-:102C1000CFED5C6D1627C5B5F8801ED14F89F23611
-:102C2000CAC3C9421E6DFC93CDC6E98EE9CEF781B9
-:102C30007E9B2E0E377B8743971FDC9CA0AB3FE427
-:102C40008053579E17C8D2950F3DE2D6E587B58EC3
-:102C5000D0D5BFFEA84797BFA1AD5057FFA653C51B
-:102C6000BA7C12EB7802E1A9E6A4123CFA2BC20E60
-:102C7000E0E47899F5FD78BA4F23F5081997ED153A
-:102C8000746CD447FA6B5E8AF36E4C646EBA0F6252
-:102C900013FA20D3EB295E11572DE579E6D3C755FA
-:102CA000CB78EA2E7D46E82F529F0889A7F6E0FCF4
-:102CB000653C7517DEC5FB9246FA74E408BF906167
-:102CC0001DFD357EFFABF1018DEEB1C8F919E73579
-:102CD00043C4036EB375FFFE504A0EB71B6C4E2DF6
-:102CE0008ECF817ACFC0F144F0BC623C779B0FE07D
-:102CF000DBF823CDBDCC79F5F1660DE1EB29C17789
-:102D00005573E89D4EBAB726C7CD15E3F6CA55BA36
-:102D10005DDFAC681EDFC5A235BA77D1F3781CAE93
-:102D2000091A5B4EEF24897B08F7AC695E9B094565
-:102D3000255A9385BFABEFB7A09DA8680CC88179D1
-:102D4000C027B6ED5B6F07F9E7997A33D97D86E541
-:102D500024DFE91B10BC57D21FF434A49322C43FD4
-:102D6000F4FBFC601EEF7C670E5F5F81FA4DD77D40
-:102D700000AB8ECF73FDAF1BBA237A94EBF8BFBACA
-:102D80001F20E9D70827A95F33717E0D10F392F059
-:102D9000EBB29F08F8C9FB19CE8596E22D76BAE70B
-:102DA00051887165127F070773BA5C2DE081F59039
-:102DB0001FF554AF40CD89463B782773463BAE6242
-:102DC0000FFE3FBA3741F0EFE9BE574F7CE20AFEF3
-:102DD000D0C3FDAF9EE893FEBEC33DB0103EC1E33D
-:102DE0007D043EFC034CE4575F15A9DFC7FB73B8B5
-:102DF000DDA544EC2738B7ED797A3EC1D0AEDFB817
-:102E000042157C624ED7EF4FE0F7D92B2C245F336D
-:102E100056FC18C619FC65BD85E262477918C931B0
-:102E2000651B15FF6605CFD1910938FF529FFE3C07
-:102E3000BE85B957A2FFA37CB5FEFB5C3BFF9D8A14
-:102E4000D9C6775384BE3EF72AFAFA8E1C718EBB20
-:102E5000999BE42EE1FFAF146D8C7257A79FFBCDB9
-:102E600050DF56B9DD89E2C6E4F9EE44FF4DC87B78
-:102E70002000CFF02C3CC7979BBB8DE7EB82670F00
-:102E8000F10AE7EC225EC1CEE3333AF78671FFA682
-:102E9000F42B89FAE77C97A81CEB636FE7F378DCE7
-:102EA00085F42719FD559D7613F95B3AF746927F15
-:102EB0001EFD38D14007674C7BE247B882F3F3B67A
-:102EC000A93A3F8831F52E7D89F4C58169DEDF217D
-:102ED0005F3F6B76DBDC907FD0FE3ABD1F5524EC64
-:102EE0005EC6F976E95D23F9FB2E9D3E2ECF761660
-:102EF000F27738802F32DC47320E6112032D15D263
-:102F0000D2C00D349FEFEACF9972398FFB312FDF9A
-:102F100044EDBDAB6FA07CFFE56B17E23D98698D7A
-:102F2000732DE8C26E7B62494138346D4BF62F0B2E
-:102F300047BC8D56BAB5CB5F12786B33C4D7CBB4D0
-:102F40005CF0237C438EF3251187B454A17DB048F7
-:102F500061322E89F8B8CC5F6A12F9029E5FBC829A
-:102F6000E7DBC4FBFADB851D05D78D29AE1BF5FE1B
-:102F70009DC2CE82EBC614D78DDF916F611EF9160C
-:102F8000E6916F611EF916A6C8B7F07B192B4EC9E2
-:102F900053B91F6A5CE8BEBB6C63E342F60BFAA14F
-:102FA00042F3E8870AAD8F7EA8D072F4438596A3DA
-:102FB0001F2A348F7EA8D0FAE8870ACDB311B7064E
-:102FC000F3C8E73C9374F92920E78F0BD9DFE88732
-:102FD0000AED1FFD50BAFEBC0B75EDEF66F5BAF6B3
-:102FE000E8870AAD7F6FBDA2F353DD2BDE392DDFFD
-:102FF00010C7E9C759EC1E0C74F05F11FFB8DF92DF
-:103000008A786E99C7F5B27037C7735321C7BB89E9
-:10301000713C77CC203C2FD178BE80C7271BE907B5
-:10302000FD3DE32CDCDF8329FA7B30457F0FA6E8EA
-:10303000EF1997CEFD3D98A2BF07BFA3BF0753F47A
-:10304000F7608AFE1E4CD1DF8329FA7B30457F0F63
-:10305000B6437F0FA6E8EFC1EFE8EFC114FD3DF8DE
-:10306000FD18FA9D2CC179A11C3F40A73F021DEA23
-:10307000F447872E8F727C687D94E343CB518E0F8B
-:103080002D47393E348F727C687D94E343F3753964
-:103090004EDA5F28CF87B643793E343FB8C9F7266A
-:1030A000DACE266CBCF006A66D91CA330AB08C85C8
-:1030B000BBF6DE897EB9B63025250638A74579E509
-:1030C000CE7190F78AF8BF5CD661427C7BC57BEA03
-:1030D000DE00A378CBC17F4DA4F217C4BD7EFA03F6
-:1030E000BCE7ED65F4BB24D25F2CDBBB9943C55430
-:1030F000D60FE6BBAF671C5FD623FE19320FBC01AB
-:103100008CF12A794BECF918EFB9DDA4509CC4F688
-:10311000653C4ED84857DB045FDA6EDAF33ADE03DB
-:10312000E92855E83E7086991DB1E4239CEAF2F146
-:10313000FC5D3B3846ACABEE46BC6F22E72DED9B09
-:10314000C027E8FEDCC88ED6B1D1D08FD7379A7EA3
-:1031500027A548E37203B6437D32DBA778B684D057
-:10316000F7E38339DFF4FAF8F83FDF3491B70BE780
-:10317000ED7EBE298AE03871B942F1522377320FD1
-:10318000DECFF58B7967EF0CA8385EE9723E9EECD6
-:10319000B774630ADD5B2C656DE312C847A230E4A7
-:1031A000DB126EB0BE37707DA0361C41FBF4B5DE7D
-:1031B000FBB9F9BA98028CA3632D8CDEB19C70DD4B
-:1031C0006F75EB25B40FA77EE95CCBF429F45EF0B4
-:1031D00044DFD265A86E4CF02D7CB337D6DFCADC55
-:1031E0002E271D45742F56CE6790678F098E459602
-:1031F000C35A4D610AE29B1D8E0BA11FD8F95311D2
-:10320000DF796E0BBDDF3BC9ECB0D0FB113DC49F35
-:103210005CB2CBF81383BC608833695C723405ED13
-:10322000C98B224D64FF5DF412FF3D00EF0685F867
-:103230009A94834A459CDAA5E56FF6BE0BE1BEC7BA
-:1032400042FDC9F893DA347F8A09E3EAFB6ECE8D3A
-:1032500055490EF8FD6094037CBFBC7304D65BC176
-:10326000DFB1BCB47C5A74807AE2FE9A0A01AF0ADC
-:1032700011C7548A0F7AABC1DFD392F73B5813972B
-:10328000F7A43DA7F43743DF42FC963E2DDE955E62
-:103290005D4AF7B28D7144F3965B28EE689E412E2D
-:1032A000AC167261F555E4C2B3830D72A1FCBD1476
-:1032B000D186A9FDFE80717BF25E628985EFFF9267
-:1032C0003D8CECB0254BC79AE81DE49738DD942C73
-:1032D000E5F24DC9CB1EBA5F28E5C5F7851C33F969
-:1032E0007212C1FDF7426E9986F19500DFA2B630E9
-:1032F00011879548E95D9779BCE5643BE7036D0765
-:10330000F93B109D3E2B97A7DE60FC1D33035D4EFD
-:1033100032FB4D78E1CE3D12E812F213500E82FEE0
-:10332000A6A35C148774EE2AA0F8BD4285EEBD18F2
-:10333000E9BCC852F726C687166D636E1F0BA573CE
-:10334000A05FECCFA7D0FB005EA1D74AFA35D2FB35
-:10335000AC08618FB2737B53975D0265547CA4DB2C
-:10336000177517CA8DB3D0B7D797130CC69D45E60E
-:10337000F0F2F4DD51772D4725A7073B85FA038D41
-:10338000E0E195EF20F46037407B01F2C97BEECBA2
-:10339000D3CA42F8E49743C6140CE91DC47759D741
-:1033A0007DBF1C7A1774D183E9F47B383DC9C3E52E
-:1033B0000057DC17B3A2DBEEC75F661B97CB3CE37D
-:1033C00046E0EF0B32F9087900E308678AFCC2DCBB
-:1033D000EBFF88BAEDAC089EF7ECEE7717C685D404
-:1033E000DADAC623D92DC8F116E23DC6207F2AF6C7
-:1033F0002429C89FF202A813CEC810E78FC11EB1BE
-:1034000030D7C9D769B04B94E770BE2D7F17E5F868
-:1034100083FB77E37925E77FBC87DF6198976BFAB9
-:103420005FBD0761BCFFF0FDBEDE99B9D0FF63262A
-:103430007E9FBFAFDAC4847D88FCC2925F30F10EFC
-:103440004610EF1E7A47B7F141C5116A9FF2AE569A
-:10345000F83DFA1EEC382CABE3896DD06E568346EE
-:10346000BFE3B72983D3CF26A01FFABD14ADF54D16
-:103470009B2B08C78FEB1FB1D0EFD2B0403ABEBF35
-:1034800033B32ECC8DFCF8CB21C575B9C3F0F7480A
-:10349000DCC4870A30861CCFF35EC58B713DB56BEB
-:1034A0000E3D83EF092C6871D1EF95941EC85B899E
-:1034B000EF9C7C39C45B8FE5A57607BDA7317F798A
-:1034C0000C9D5FB3FA887BA1AC83FC6C12FE4DC2ED
-:1034D0007E75AB9B89DFDB12F71D80414ED2D5EBA9
-:1034E000DE8E27ED84463B83F17D899EEC0BD29ED8
-:1034F00080F6032DC4CE28ED1396ACE333506E282E
-:10350000D1F4F712657A2857E8B9420F9CDD756E41
-:10351000E58CEF83F2F13AC541EF4DDA9D77DD009E
-:10352000F98A23168CEC6445B14E0DDF1FE800FCD0
-:10353000627C7419EC57E43325224EAB62C30DB4A0
-:10354000DF2AFC9076F30EA74CEF5E7738F965A47E
-:103550009F8087FC96150E8F161BB2EFCB9B14DD58
-:10356000BB0332BF2797DBE34A602B23FCEEB9CFC6
-:10357000A5E1DB3E25204660FCDFA15CA7CE7F0CE9
-:10358000F5281EA42895BDC5DF818779BBF878F999
-:1035900021FD9735F17BD3320FF549FE793537920E
-:1035A000F057EA8075BB3075D03C010E04A78EB58C
-:1035B000D09F93C6217C9407FC16D4B74B300E05E0
-:1035C000F2331D7E0B8E53B69CBF63E25DC3C7F121
-:1035D000AE8ED106A37C647668C9083FF13BAD305E
-:1035E0003F92232B002E781F0BEFBBE1D962844F53
-:1035F000A9986F45530CBDA310FCBECE82F898D19C
-:10360000C3BB08E705DD962D1F4DF7D72BCC1EBA9F
-:10361000E7E015F0FDCBC2B087D03F3063FDE31685
-:1036200017E43F11F47B5EECBBA2D4403ABD57B423
-:1036300030CC8DF39CE168A2F575C1F7518087828B
-:10364000EFDC14137C812E7C18B757B15E8FCFE06E
-:103650007C387C2BD697D27E9B63F66A8ED0796CB1
-:1036600038948EF7AA66C0FEC6772598C34BF72517
-:103670003F7DF4AE145A27CC13E11AE9768EC7F7D2
-:1036800087804EF83D18B11E79AF5B8E6719C2EF87
-:103690009D5A8670FB59CFFBD243724D23E017ED44
-:1036A000DE3DED4B0D19378CAB55F0DF9130EE530D
-:1036B000B93FE5BE94FB54EEDF672CC5810425C8F5
-:1036C00067E09CAD7BB11B38150CE1789829F00AB6
-:1036D000707D23F49E57EE10BE9F4B52F5FB1DFBF1
-:1036E000C37EFB0EE1782F191348C77799647D39A3
-:1036F0006E492C6F87748FF4D6578C87F517517DE0
-:10370000938E5F9477F18B9D2BE2915FEC51B81F04
-:1037100074EDE1E4EFA3FCBA8BCBAF676BB6CDC71A
-:10372000F39299FD29A1EFFBCF063907F9C41C716B
-:103730003E5704BAE7173B33BCD94342F673C5CFB3
-:1037400076657839BF0920BFF9F3AE573FBCD11970
-:103750003C4FE57ACA56FFD6526A0F859F22DE1D7E
-:10376000E9A4FB78E576CD89F1CEE5CB4B89FFB2B4
-:1037700004900B9590F833035D942E57E81E597909
-:10378000FD70BFFABFC8A7CBD74CA2770F24DEE4E9
-:10379000FB2CF27C95F39F28F0356908DF87330511
-:1037A0007DCFAC1CAD25F622B91BC32CD90CF17D05
-:1037B0004685FE7B17DEBAFCD7392B71BFE0FD22B0
-:1037C000D24FD658B8BD6F27B73F9E5DB4FFBD3B03
-:1037D000A1DE99C736A730558F379453E70879751E
-:1037E000AEB0FF7583B73294DB647EEE268EB7F2FF
-:1037F000DDBFF904DF132B4915FC6E2D7F07A0AC4C
-:10380000790FE171C6EA751617CA75435CBAF736C7
-:10381000CAEBF21C68579EB97AB305F9C4A2211C01
-:103820008EC6FD5022E284259CF15C5242FC1BB204
-:103830003EF2477CFFFEBE85615118CF23C7794A0F
-:10384000D07D795D4C2C8E575E57FA13D487E4797E
-:10385000605CE78930BE5FCAA03FDCB72746BB5338
-:1038600016E504E55963FD47041D3E65E1BF53932A
-:1038700014D1FC1CC5352C087723FF1830A0CD8F40
-:10388000E3227DE3BC3513FF5D9B01356D9FE33C77
-:1038900040D4A6B81A4CF17D2C14BDE321BFC5C499
-:1038A000EF6FA5AA3C3D20E003E5012C67BDDAE8F7
-:1038B000F73542E26675F4ABB1ADF4FB895A2F4699
-:1038C000EF9B497A95FD487A95F4DCD3FA9AAF716B
-:1038D0007D275C1C9E9AF8DD946B5E9F95FF8EAEF3
-:1038E0005C979C1FC8F01E7ADFE38783C9DE736292
-:1038F000A93B05E3267B5EEFFA82F86ED66B5CA7E8
-:10390000DC373216BECB9FD5C4FD0E271438DFA09E
-:10391000DD89856114DF26D7F55DEDE11F0C899502
-:10392000EFF947A29C59121EBC2F8FF03B56CF7F58
-:103930005F577E9772817C674EF2EF9375E2DC648D
-:103940006D6B717FB3FA347AFFE458D389487C8F6A
-:10395000E5C4683E3FD9EE3E0BBF9FCC223527DE43
-:10396000138BB8EFB7057DD03FB4DE95A740BB7B86
-:10397000EA871EC3F7C7EF59DE87F4FBD976E74A1B
-:103980003C1767FB5CE40F8E589FF729BEA3377B7B
-:103990007936FD6EEF7D0A2B267D52E8097358D7E4
-:1039A0001FE90973055F9B8BFC12EF4BD51FA677B0
-:1039B000F3E6B8C3F2F07C9FBB81EB094526B61A4B
-:1039C000FD89FD1B8BC7231FEB7842E1BFFBBC5178
-:1039D000FF0E577666F1453C1F8CEFDEDD6769F61A
-:1039E000E03A18C82368779A6D2FE672BDE09FC74A
-:1039F000D6B7D3EF6522BCE9F7720CF69BFE1ABF6F
-:103A000047DC1169227B1CE0FD7DFC3D327C6FDDD3
-:103A10004AE78DDE7ED3FFC723E8F7DAE43DA10A4B
-:103A2000E177FA7F89106A7A0080000000000000C8
-:103A30001F8B080000000000000BCD567D4C535733
-:103A4000143FF7BE7E53E8E31B44B08060B7157C9B
-:103A500005257126FA066A4C66B4B8A13451A851FE
-:103A6000192A65CC2C019739AB9DCE68B6B10415E7
-:103A7000892C8529FB675B4A249B666C6924CE6C84
-:103A8000928CC83F266CA4240BA299A16359906420
-:103A9000D39D735F9B1A3F92FDB9F7CF79F7DEF3A1
-:103AA00075CFEF77CE7B506FE29005D06C02F1ECD2
-:103AB000ED7B2D0BAC28BB25B05702F4D0E62A8055
-:103AC000135D35591127C09E4FD69FF597011430CD
-:103AD000708750EF375DA4165600CCF465A71D65BE
-:103AE00078EE0B94029EEFE9FBA080E44C9FB93E78
-:103AF000887AEBE4DA75A919004D17525D921DE042
-:103B0000113D6BD18F82469900FB7D35D95004D091
-:103B1000F270E453B918E31702C8E8F7AF5052D077
-:103B20008F2A2D47AE14481C40317A7395950007B3
-:103B3000F8F0B655E8E71E0B0EE40A7D7BB66C4D37
-:103B4000F87D524E1F01B01B017CEFDD167EEEF3B7
-:103B5000D1CD1EB46FF15D4E213F07CE8C57C9B851
-:103B6000FF42B1B744C924BF7D03B28477EFEE2B87
-:103B700077E33D4A1510796E4A736FF3605ED11F8B
-:103B800025A5DFFEFC78CD5730E9CAC47A67D06638
-:103B900000AC9F370C0699A40C86349433127484BD
-:103BA000506E2A82C6ADD6C4FEAA585D666C9D05CD
-:103BB0006EDCDF3770AEC08EF26EB2B6DE31B0FDB5
-:103BC000274841FD8B4603E1E5D5814141BBDD7EC0
-:103BD000A6065142731A406E227E8D92048075DBD8
-:103BE000D78D49A527F6018262FFAE0E36521E4BD5
-:103BF0000251D75B282774E1BD84EB449B59F11730
-:103C0000124E7691CF44A7B481F6FD6F332861B48C
-:103C1000BE9CBC14E337D8A08DEC935784C21C71B2
-:103C2000F60DA556481AA504BF5A656DB15EB26E71
-:103C3000C8C3F383834C36A2CB8357AF6F006D0D9F
-:103C4000C09E5FCFFD0F5683FDB1BCF70F0D1AEC80
-:103C500018AFE50BBC2FC66F090DFEB008FDB45EB2
-:103C6000D955A9C5ED04A8C23CE815E3B40E6975A1
-:103C7000F10D4D19763B137E7639D24EE421B64DC7
-:103C8000A135DBCFA0DE2EC2ED6580C3E515F5477B
-:103C9000979294C5BD41172D7027039C72DC327832
-:103CA000C9CFFB317F8E5B278AC47D6BD3E1313E68
-:103CB000BCA1E8855DDC1EEB21ECC23ECB49580E71
-:103CC000A0B65A7524033E6B0AC90B6DDCA1C3BABA
-:103CD000AACCA24858EF0E534A39D800E6CD9A1C18
-:103CE000B668B29DBB079B30C5793E6606E47DBBD6
-:103CF000D4C948AE75B631AC34C819DEC3C4DF1CB4
-:103D0000083110850833CA7BF6BB3B95147FCD92F2
-:103D1000C89F8029E9995ABF0EF9715C9105FEE0B0
-:103D20008C5412CF33AF4123F1AB570F27CD15740D
-:103D30006F376C2D232FF84EB82FF0E025CC6F98FD
-:103D4000853F23FFF1FB5E25BEA21FB7D17A9261AA
-:103D50009E06BBF723CA630BD397B93861209590B1
-:103D6000FF59BD760E9DE75413F2A25AA305E473E2
-:103D7000F00352D6B028C74ABC66AA0A1D18FF989D
-:103D8000F3DA6EE2C7E9A8098C183710AB4775D48F
-:103D900032C5502F7FD1460EE5A86FCF801D687FBA
-:103DA000CDC9FD46CCF3349882A40FA6F56AC4A110
-:103DB000C57884F3C5C0CDAAD01FBEB1C050E649B6
-:103DC0007F8CD8503FAF9D2901D469989BEEFD1997
-:103DD000E50E08BAA8AE5B32BC9FD3BC999CDB3819
-:103DE000E5457C4FCB2113F5193D8FE73F7C6821DA
-:103DF000258D27F29A8D4E7FF9CD0A922685A15DF9
-:103E0000F5B01436963F9DCF6C8E5D4771502FCC28
-:103E100049DFCA838C91FEC86DCAAFDA640D4B29A5
-:103E200064A7FF3D624AD8C1587EEAF44B20207E49
-:103E300094079015D0705B13EBC3382E37152E7096
-:103E4000B919C3275E3F913CF6C74193D61FDF5B8C
-:103E50000776127FE2FDFA666C7FEE41918DE6CB2C
-:103E6000DC70B10D9CCFEFCF719CAFB00CE75CA1C3
-:103E70003A4EB8E3A39AD07F5DAC3E8837905F2975
-:103E8000E6B72E56A73A2BD7EAF2FA137589F12432
-:103E9000CE8378DE719CE3F8C13B63D76D8502B7B2
-:103EA000B28F41E0F52BC59F5C183D8E6D058B24CC
-:103EB00075CA5BF87FC42B6C5E86BC8E9EE14A3F60
-:103EC000F19F0A5F21A4CAF17EE000310F1A248B12
-:103ED00072EA19F3C04BF36039CD834ED1E7F33C5E
-:103EE0007A9D339A076D629D03D1A33A5C4FF248E5
-:103EF00032E51B3123EB5116BA8AC43CCAA38E2E7D
-:103F0000D670A2BEEE3D94DC7F0AF5034C3D6F42B5
-:103F1000FB803ED6EFFBACC14BB83F1BE47E3DC6F9
-:103F2000EB4A0D9E6FC2FDAEBAC58A1FEB340B3152
-:103F3000BD668B980BAB3917EBA8272BD85F48FAD7
-:103F4000D8D778CF2ECF8BE23BFEF543744EF72EB9
-:103F500001EDDC05A5DD745EEB10FEBE8DCF990F83
-:103F60009385BFAE5A35D722CEB338D91F4FF7E667
-:103F7000B93209574D0F7F04845E4F8F9A4B78F406
-:103F80006C3508BDB3CCEDD94B7ECAACCA25F41B49
-:103F9000F158BE1AD0E00833DC9FECD0EE1BE7AF3F
-:103FA000A7549B834BFC53E7E93FC45F0D8E36E477
-:103FB000FD24F17079021FA6221669099CE27CF4A7
-:103FC000EB11AF0C0DAF63EC69BC326278B10EE45B
-:103FD0006D0AE11612F59FE71A0EED124492F04EAB
-:103FE0001257728C282732BC55DA3DC772E9BCC122
-:103FF0001859D9E9243CA139F48C3E7CC5A5F53982
-:10400000D0571479DE18E379639C8FEF3EC1C7C89F
-:10401000E2D4E9A4181FD1FE178BBB86E2DD67E36B
-:1040200055B439FA8F54FFAC389B5CDA7FC99CD108
-:10403000FB2AE9C3C56C2EE688ACF5F5A8EB4E3E2D
-:104040007D67E0EF91C5F4DDE94D776F263DF3D252
-:10405000A8C14BF5CC8DEAE93E939E7BF9F43FD3A2
-:10406000D87143F4CD7FCDF35F8E8A94E2B00A001D
-:104070000000000000000000000000180000000028
-:1040800000000000000000400000000000000000F0
-:1040900000000028000000000000000000000010E8
-:1040A00000000000000000000000002000000000F0
-:1040B00000000000000000100000000000000000F0
-:1040C00000000008000000000000000000000000E8
-:1040D00000000000000000000000000000000000E0
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000000000000000000000000000C0
-:1041000000000000000000000000000000000000AF
-:10411000000000000000000000000000000000009F
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:10414000000000000000000000000000000000006F
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:10417000000000000000000000000000000000003F
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A000000000000000000000000000000000000F
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D00000000000000000000000000000000000DF
-:1041E00000003328001000000000000800003330F9
-:1041F0000010000000000002000033280010000042
-:104200000000001000003A780000000000000008E4
-:10421000800000000000000000000000800000009E
-:10422000000000000000000080000000000000000E
-:104230000000000000003120000000000000000825
-:10424000000033600001000400000001000033683A
-:1042500000000000000000020000337000000000B9
-:10426000000000080000337400000000000000029D
-:1042700000003A70000000000000000800003A4012
-:10428000000800000000000800003D880040000019
-:104290000000004000003A50000800000000000844
-:1042A00000003A60000800000000000800003A88A2
-:1042B00000C800000000009800003C1800980000B2
-:1042C0000000002800003C58009800000000002872
-:1042D00000003378036000300000036000003EB04F
-:1042E000000800000000000100003EB100080000CE
-:1042F0000000000100002008001000000000001075
-:104300000000200000000000000000088000000005
-:10431000000000000000000080000000000000001D
-:10432000000000000000000000000000000000008D
-:10433000000000000000000000000000000000007D
-:1043400000000000000000008000000000000000ED
-:1043500000000000800000000000000000000000DD
-:10436000800000000000000000000000800000004D
-:1043700000000000000000008000000000000000BD
-:1043800000000000800000000000000000000000AD
-:10439000800000000000000000000000800000001D
-:1043A000000000000000000080000000000000008D
-:1043B000000000008000000000000000000000007D
-:1043C00080000000000000000000000080000000ED
-:1043D000000000000000000080000000000000005D
-:1043E00000000000000000000000000000000000CD
-:1043F00000000000000000000000000000000000BD
-:1044000000000000000000000000000000000000AC
-:10441000000000000000000000000000000000009C
-:10442000800000000000000000000000800000008C
-:1044300000000000000000008000000000000000FC
-:10444000000000000000000000000000000000006C
-:10445000800000000000000000000000800000005C
-:1044600000000000000000008000000000000000CC
-:10447000000000000000000000000000000000003C
-:10448000000000000000000000000000000000002C
-:10449000000000000000000000000000000000001C
-:1044A000000000000000000000000000000000000C
-:1044B000000000000000000000000000000012C822
-:1044C00000800000000000800000000100000000EB
-:1044D0000000000000004000049000000000049074
-:1044E000000019C800000000000000080000494852
-:1044F0000008000000000008000049280008000033
-:104500000000000800004938000800000000000812
-:104510000000200800100000000000100000200033
-:10452000000000000000000800004010049000405F
-:104530000000004000004998000800000000000151
-:104540000000499900080000000000018000000000
-:1045500000000000000000008000000000000000DB
-:1045600000000000800000000000000000000000CB
-:10457000800000000000000000000000800000003B
-:1045800000000000000000008000000000000000AB
-:10459000000000008000000000000000000000009B
-:1045A000800000000000000000000000800000000B
-:1045B000000000000000000080000000000000007B
-:1045C000000000008000000000000000000000006B
-:1045D00080000000000000000000000080000000DB
-:1045E00000000000000000000000000000000000CB
-:1045F00000000000000000000000000000000000BB
-:1046000000000000000000000000000000000000AA
-:10461000000000000000000000000000000000009A
-:10462000000000008000000000000000000000000A
-:1046300080000000000000000000000000000000FA
-:1046400000000000000000008000000000000000EA
-:1046500000000000800000000000000000000000DA
-:10466000800000000000000000000000800000004A
-:1046700000000000000000000000400000180000E2
-:10468000000000180000430000400000000000404F
-:104690000000430000400002000000010000430150
-:1046A0000040000200000000000030000040000058
-:1046B000000000408000000000000000000000003A
-:1046C000000030000008004000000004000030043A
-:1046D000000800400000000400004B00002800001B
-:1046E0000000002800004B500010000000000010E7
-:1046F000000038000080000000000080000038004A
-:1047000000080080000000020000390000200000C6
-:104710000000002000002008001000000000001031
-:104720000000200000000000000000080000510808
-:1047300000080000000000080000512000080000F0
-:1047400000000008000051300008000000000008D0
-:10475000000051C00008000000000001000051C12D
-:1047600000080000000000010000394000100004B3
-:1047700000000004000051D00030001800000010BC
-:10478000000051D800300018000000028000000036
-:104790000000000000000000800000000000000099
-:1047A0000000000080000000000000000000000089
-:1047B00080000000000000000000000080000000F9
-:1047C0000000000000000000800000000000000069
-:1047D0000000000080000000000000000000000059
-:1047E00080000000000000000000000080000000C9
-:1047F00000000000000000000000000000000000B9
-:1048000000000000000000000000000000000000A8
-:104810000000000000000000000000000000000098
-:104820000000000000000000800000000000000008
-:1048300000000000800000000000000000000000F8
-:10484000000000000000000000000000000023E85D
-:104850000080000000000080000000010000000057
-:104860000000000000002008001000000000001000
-:1048700000002000000000000000000800002DA043
-:10488000000800000000000800002DB8000800002B
-:1048900000000008000024E802D00028000002D038
-:1048A00000002E58000800000000000100002E59F2
-:1048B000000800000000000100002D90000800002A
-:1048C0000000000880000000000000000000000060
-:1048D00080000000000000000000000080000000D8
-:1048E0000000000000000000800000000000000048
-:1048F0000000000080000000000000000000000038
-:1049000080000000000000000000000080000000A7
-:104910000000000000000000000000000000000097
-:104920000000000000000000000000000000000087
-:104930000000000000000000000000000000000077
-:1049400000000000000000008000000000000000E7
-:1049500000000000800000000000000000000000D7
-:1049600000000000000000000000000080000000C7
-:1049700000000000000000008000000000000000B7
-:1049800000000000800000000000000000000000A7
-:104990008000000000000000000000000000250072
-:1049A0000040000000000008000025080040000052
-:1049B00000000028000009C00120001000000008CD
-:1049C00080000000000000000000000080000000E7
-:1049D00000000000000000000000402002D000287D
-:1049E000000000080000300000000000000010007F
-:1049F000000050990000000000000001000050B0CD
-:104A00000000000000000002000045A00090000827
-:104A1000000000088000000000000000000000000E
-:104A2000000029600008000000000001000029616A
-:104A300000080000000000010000297000080004C8
-:104A400000000002000029780008000400000004B3
-:104A500000002FB0000800000000000400002FB488
-:104A6000000800000000000400002FC0000000004B
-:104A70000000000800002FC800000000000000082F
-:104A80000000300000000000000000100000504056
-:104A900000010001000000010000500000000000C3
-:104AA00000000020000008080010000000000004C2
-:104AB0000000080C0010000000000001000008B712
-:104AC0000000000000000001000008B60000000027
-:104AD0000000000100001000003000180000000479
-:104AE000000010040030001800000004000010084E
-:104AF00000300018000000020000100A003000180A
-:104B0000000000020000100C00300018000000013E
-:104B10000000100D00300018000000010000100E11
-:104B200000300018000000010000101000300018D4
-:104B30000000000400001014003000180000000401
-:104B40000000300001000080000800040000300474
-:104B500001000080000800040000000A00000000BE
-:104B6000000000000000306801000080000000012B
-:104B70000000306901000080000000010000306C7E
-:104B800001000080000000020000306E0100008083
-:104B900000000002000030700100008000000004EE
-:104BA0000000307401000080000000040000306646
-:104BB000010000800000000200003064010000805D
-:104BC00000000001000030600100008000000002D1
-:104BD0000000306201000080000000020000305040
-:104BE000010000800000000400003054010000803B
-:104BF00000000004000030580100008000000004A4
-:104C00000000305C01000080000000040000307CE7
-:104C100001000080000000010000307D01000080E4
-:104C20000000000100001C1800100000000000043B
-:104C300000001C30001000000000000400001C38C0
-:104C400000100000000000048000000000000000D0
-:104C500000000000800000000000000000000000D4
-:104C60008000000000000000000000008000000044
-:104C7000000000000000000000004C1000080000D0
-:104C80000000000200004C120008000000000002BA
-:104C900000004C14000800000000000400004C203C
-:104CA000000800000000000800004C300040000830
-:104CB0000000000800004C00000800000000000296
-:104CC00000004C02000800000000000100004C043D
-:104CD000000800000000000200004CD000080000A6
-:104CE0000000000800004CE0000800000000000484
-:104CF00000004CE4000800000000000100004CF03F
-:104D0000000800000000000200004CF40008000051
-:104D10000000000200004D00000800000000000438
-:104D200000005000001000000000000400005004CB
-:104D300000100000000000040000500800100000F7
-:104D40000000000400001400000800000000000241
-:104D5000000014020008000000000001000014041C
-:104D6000000800000000000200001410000800000D
-:104D700000000002000014140008000000000002FF
-:104D8000000014160008000000000002000019B81E
-:104D900000080000000000080000142000080000C7
-:104DA00000000002000014240008000000000002BF
-:104DB000000019C8000800000000000800002C10C6
-:104DC000000800000000000100002C110008000095
-:104DD0000000000100002C1200080000000000018B
-:104DE00000002C13000800000000000100002C004F
-:104DF000000800000000000200002C020008000073
-:104E00000000000100002C04000800000000000267
-:104E100000002C30000800000000000200002C32CE
-:104E2000000800000000000200002C340008000010
-:104E30000000000200002C2000080000000000011B
-:104E400000002C21000800000000000100002C22BE
-:104E5000000800000000000100002C2300080000F2
-:104E60000000000100002C240008000000000001E8
-:104E700000002C25000800000000000100002C2686
-:104E800000080000000000010000140000080000FD
-:104E900000000002000014020008000000000001F1
-:104EA00000001404000800000000000200001412BA
-:104EB00000C00018000000020000141000C000181C
-:104EC000000000020000141C00C0001800000008D0
-:104ED0000000141400C0001800000008000014278F
-:104EE00000C00018000000010000142400C00018D9
-:104EF000000000020000142600C00018000000019D
-:104F0000000015900008000000000008000015A037
-:104F10000008000000000008000015B000080000B4
-:104F200000000008800000000000000000000000F9
-:104F30008000000000000000000000008000000071
-:104F400000000000000000008000000000000000E1
-:104F500000000000800000000000000000000000D1
-:104F60008000000000000000000000008000000041
-:104F700000000000000000008000000000000000B1
-:104F800000000000800000000000000000000000A1
-:104F90008000000000000000000000008000000011
-:104FA0000000000000000000800000000000000081
-:104FB0000000000080000000000000000000000071
-:104FC00080000000000000000000000080000000E1
-:104FD0000000000000000000800000000000000051
-:104FE0000000000080000000000000000000000041
-:104FF00080000000000000000000000080000000B1
-:105000000000000000000000800000000000000020
-:105010000000000080000000000000000000000010
-:105020008000000000000000000000008000000080
-:1050300000000000000000008000000000000000F0
-:1050400000000000800000000000000000000000E0
-:1050500080000000000000000000000000000000D0
-:1050600000000000000000008000000000000000C0
-:105070000000000000000000060205000000000023
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw.ihex b/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw.ihex
new file mode 100644
index 0000000..0ed7f58
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw.ihex
@@ -0,0 +1,9484 @@
+:1000000000003BB0000000680000070C00003C202E
+:1000100000001AF8000043300000007C00005E3051
+:1000200000007A2C00005EB0000000B00000D8E0B4
+:10003000000080200000D99800000088000159C00D
+:100040000000398800015A5000000090000193E040
+:100050000000AC040001947800000FFC0002408016
+:100060000000000400025080020400480000000F5D
+:100070000204005400000045020400580000000083
+:100080000204005C0000000602040070000000048E
+:1000900002040078000000000204007C1217000037
+:1000A00002040080221700000204008432170000BE
+:1000B00006040088000000050204009C12150000E0
+:1000C000020400A022150000020400A43215000062
+:1000D000060400A800000004020400B8021000009A
+:1000E000020400BC00100000020400C01010000058
+:1000F000020400C420100000020400C830100000F8
+:10010000060400CC00000004020400DC0010000023
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000060400EC00000004A1
+:100130000104012400000000010401280000000067
+:100140000104012C00000000010401300000000047
+:1001500002040004000000FF02040008000000FF89
+:100160000204000C000000FF02040010000000FF69
+:1001700002040014000000FF02040018000000FF49
+:100180000204001C000000FF02040020000000FF29
+:10019000020400240000003E0204002800000000C9
+:1001A0000204002C0000003F020400300000003F69
+:1001B000020400340000003F020400380000000088
+:1001C0000204003C0000003F020400400000003F29
+:1001D000020400440000003F020420080000021155
+:1001E0000204200C0000020002042010000002049F
+:1001F00002042014000002190204201C0000FFFF6A
+:10020000020420200000FFFF020420240000FFFF62
+:10021000020420280000FFFF0604203800000080B0
+:100220000204223807FFFFFF0204223C0000003FC7
+:100230000204224007FFFFFF020422440000000FD7
+:1002400001042248000000000104224C00000000CC
+:1002500001042250000000000104225400000000AC
+:1002600001042258000000000104225C000000008C
+:10027000010422600000000001042264000000006C
+:1002800001042268000000000104226C000000004C
+:10029000010422700000000001042274000000002C
+:1002A00001042278000000000104227C000000000C
+:1002B000020424BC000000010C042000000003E83C
+:1002C0000A042000000000010B0420000000000AC6
+:1002D0000605400000000D0002050044000000205B
+:1002E00002050048000000320205009002150020BF
+:1002F000020500940215002002050098000000305D
+:100300000205009C08100000020500A00000003358
+:10031000020500A400000030020500A80000003122
+:10032000020500AC00000002020500B0000000055C
+:10033000020500B400000006020500B8000000023B
+:10034000020500BC00000002020500C00000000021
+:10035000020500C400000005020500C800000002FC
+:10036000020500CC00000002020500D000000002DF
+:10037000020500D400000001020501140000000184
+:100380000205011C0000000102050120000000021E
+:1003900002050204000000010205020C00000040FA
+:1003A00002050210000000400205021C00000020AF
+:1003B00002050220000000130205022400000020B4
+:1003C000060502400000000A04050280002000002B
+:1003D000020500500000000702050054000000075D
+:1003E00002050058000000000205005C0000000843
+:1003F0000605006000000004020500D800000006A9
+:10040000020500E00000000D020500E40000002DE0
+:10041000020500E800000000020500EC00000020DA
+:10042000020500F000000000020500F400000020BA
+:10043000020500F800000000020500FC000000209A
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C0000406100002000020020600DC000000010B
+:1004D000010600D80000000004060200000302200C
+:1004E000020600DC0000000002060068000000B800
+:1004F0000206007800000114010600B800000000A8
+:10050000010600C8000000000206006C000000B8F0
+:100510000206007C00000114010600BC000000007F
+:10052000010600CC0000000007180400007B00005A
+:100530000818076000140223071C00002A040000AA
+:10054000071C800032110A82071D00001E0C1707CD
+:10055000081D4550575602250118000000000000F4
+:10056000011800040000000001180008000000004D
+:100570000118000C0000000001180010000000002D
+:100580000118001400000000021800200000000103
+:1005900002180024000000020218002800000003D6
+:1005A0000218002C000000000218003000000004B7
+:1005B000021800340000000102180038000000009A
+:1005C0000218003C00000001021800400000000476
+:1005D000021800440000000002180048000000015A
+:1005E0000218004C00000003021800500000000038
+:1005F0000218005400000001021800580000000416
+:100600000218005C000000000218006000000001F9
+:1006100002180064000000030218006800000000D7
+:100620000218006C000000010218007000000004B5
+:100630000218007400000000021800780000000496
+:100640000218007C00000003061800800000000271
+:10065000021800A400003FFF021800A8000003FFDA
+:1006600002180224000000000218023400000000FA
+:100670000218024C00000000021802E4000000FF13
+:100680000618100000000400021B8BC000000001CF
+:10069000021B800000000034021B80400000001894
+:1006A000021B80800000000C021B80C000000020A4
+:1006B0000C1B83000007A1200A1B830000000138E7
+:1006C0000B1B8300000013880A1B834000000000FE
+:1006D0000C1B8340000001F40B1B8340000000054D
+:1006E000021B83800007A120021B83C0000001F4CD
+:1006F000061A100000000273041A19CC0001022728
+:10070000061A2008000000C8061A20000000000297
+:10071000041A499800040228061A2E280000000234
+:10072000061A2E2000000002061A0800000000022F
+:10073000061A080800000004061A08180000000243
+:10074000041A08B00002022C061A2FD0000000067E
+:10075000041A2FE80002022E041A2FC000040230EF
+:10076000041A300000010234061A300400000003AD
+:10077000041A301000010235061A3014000000037C
+:10078000041A302000010236061A3024000000034B
+:10079000041A303000010237061A3034000000031A
+:1007A000041A304000010238061A304400000003E9
+:1007B000041A305000010239061A305400000003B8
+:1007C000041A30600001023A061A30640000000387
+:1007D000041A30700001023B061A30740000000356
+:1007E000041A30800001023C061A30840000000325
+:1007F000041A30900001023D061A309400000003F4
+:10080000041A30A00001023E061A30A400000003C2
+:10081000041A30B00001023F061A30B40000000391
+:10082000041A30C000010240061A30C40000000360
+:10083000041A30D000010241061A30D4000000032F
+:10084000041A30E000010242061A30E400000003FE
+:10085000041A30F000010243061A30F400000003CD
+:10086000041A310000010244061A3104000000039A
+:10087000041A311000010245061A31140000000369
+:10088000041A312000010246061A31240000000338
+:10089000041A313000010247061A31340000000307
+:1008A000041A314000010248061A314400000003D6
+:1008B000041A315000010249061A315400000003A5
+:1008C000041A31600001024A061A31640000000374
+:1008D000041A31700001024B061A31740000000343
+:1008E000041A31800001024C061A31840000000312
+:1008F000041A31900001024D061A319400000003E1
+:10090000041A31A00001024E061A31A400000003AF
+:10091000041A31B00001024F061A31B4000000037E
+:10092000041A31C000010250061A31C4000000034D
+:10093000041A31D000010251061A31D4000000031C
+:10094000041A31E000010252061A31E400000003EB
+:10095000041A31F000010253061A31F400000003BA
+:10096000041A320000010254061A32040000000387
+:10097000041A321000010255061A32140000000356
+:10098000041A322000010256061A32240000000325
+:10099000041A323000010257061A323400000003F4
+:1009A000041A324000010258061A324400000003C3
+:1009B000041A325000010259061A32540000000392
+:1009C000041A32600001025A061A32640000000361
+:1009D000041A32700001025B061A32740000000330
+:1009E000041A32800001025C061A328400000003FF
+:1009F000041A32900001025D061A329400000003CE
+:100A0000041A32A00001025E061A32A4000000039C
+:100A1000041A32B00001025F061A32B4000000036B
+:100A2000041A32C000010260061A32C4000000033A
+:100A3000041A32D000010261061A32D40000000309
+:100A4000041A32E000010262061A32E400000003D8
+:100A5000041A32F000010263061A32F400000003A7
+:100A6000041A330000010264061A33040000000374
+:100A7000041A331000010265061A33140000000343
+:100A8000041A332000010266061A33240000000312
+:100A9000041A333000010267061A333400000003E1
+:100AA000041A334000010268061A334400000003B0
+:100AB000041A335000010269061A3354000000037F
+:100AC000041A33600001026A061A3364000000034E
+:100AD000041A33700001026B061A3374000000031D
+:100AE000041A33800001026C061A338400000003EC
+:100AF000041A33900001026D061A339400000003BB
+:100B0000041A33A00001026E061A33A40000000389
+:100B1000041A33B00001026F061A33B40000000358
+:100B2000041A33C000010270061A33C40000000327
+:100B3000041A33D000010271061A33D400000003F6
+:100B4000041A33E000010272061A33E400000003C5
+:100B5000041A33F000010273061A33F40000000394
+:100B6000041A340000010274061A34040000000361
+:100B7000041A341000010275061A34140000000330
+:100B8000041A342000010276061A342400000003FF
+:100B9000041A343000010277061A343400000003CE
+:100BA000041A344000010278061A3444000000039D
+:100BB000041A345000010279061A3454000000036C
+:100BC000041A34600001027A061A3464000000033B
+:100BD000041A34700001027B061A3474000000030A
+:100BE000041A34800001027C061A348400000003D9
+:100BF000041A34900001027D061A349400000003A8
+:100C0000041A34A00001027E061A34A40000000376
+:100C1000041A34B00001027F061A34B40000000345
+:100C2000041A34C000010280061A34C40000000314
+:100C3000041A34D000010281061A34D400000003E3
+:100C4000041A34E000010282061A34E400000003B2
+:100C5000041A34F000010283061A34F40000000381
+:100C6000041A350000010284061A3504000000034E
+:100C7000041A351000010285061A3514000000031D
+:100C8000041A352000010286061A352400000003EC
+:100C9000041A353000010287061A353400000003BB
+:100CA000041A354000010288061A3544000000038A
+:100CB000041A355000010289061A35540000000359
+:100CC000041A35600001028A061A35640000000328
+:100CD000041A35700001028B061A357400000003F7
+:100CE000041A35800001028C061A358400000003C6
+:100CF000041A35900001028D061A35940000000395
+:100D0000041A35A00001028E061A35A40000000363
+:100D1000041A35B00001028F061A35B40000000332
+:100D2000041A35C000010290061A35C40000000301
+:100D3000041A35D000010291061A35D400000003D0
+:100D4000041A35E000010292061A35E4000000039F
+:100D5000041A35F000010293061A35F4000000036E
+:100D6000041A360000010294061A3604000000033B
+:100D7000041A361000010295061A3614000000030A
+:100D8000041A362000010296061A362400000003D9
+:100D9000041A363000010297061A363400000003A8
+:100DA000041A364000010298061A36440000000377
+:100DB000041A365000010299061A36540000000346
+:100DC000041A36600001029A061A36640000000315
+:100DD000041A36700001029B061A367400000003E4
+:100DE000041A36800001029C061A368400000003B3
+:100DF000041A36900001029D061A36940000000382
+:100E0000041A36A00001029E061A36A40000000350
+:100E1000041A36B00001029F061A36B4000000031F
+:100E2000041A36C0000102A0061A36C400000003EE
+:100E3000041A36D0000102A1061A36D400000003BD
+:100E4000041A36E0000102A2061A36E4000000038C
+:100E5000041A36F0000102A3061A36F4000000035B
+:100E6000041A3700000102A4061A37040000000328
+:100E7000041A3710000102A5061A371400000003F7
+:100E8000041A3720000102A6061A372400000003C6
+:100E9000041A3730000102A7061A37340000000395
+:100EA000041A3740000102A8061A37440000000364
+:100EB000041A3750000102A9061A37540000000333
+:100EC000041A3760000102AA061A37640000000302
+:100ED000041A3770000102AB061A377400000003D1
+:100EE000041A3780000102AC061A378400000003A0
+:100EF000041A3790000102AD061A3794000000036F
+:100F0000041A37A0000102AE061A37A4000000033D
+:100F1000041A37B0000102AF061A37B4000000030C
+:100F2000041A37C0000102B0061A37C400000003DB
+:100F3000041A37D0000102B1061A37D400000003AA
+:100F4000041A37E0000102B2061A37E40000000379
+:100F5000041A37F0000102B3061A37F40000000348
+:100F6000041A3800000102B4061A38040000000315
+:100F7000041A3810000102B5061A381400000003E4
+:100F8000041A3820000102B6061A382400000003B3
+:100F9000041A3830000102B7061A38340000000382
+:100FA000041A3840000102B8061A38440000000351
+:100FB000041A3850000102B9061A38540000000320
+:100FC000041A3860000102BA061A386400000003EF
+:100FD000041A3870000102BB061A387400000003BE
+:100FE000041A3880000102BC061A3884000000038D
+:100FF000041A3890000102BD061A3894000000035C
+:10100000041A38A0000102BE061A38A4000000032A
+:10101000041A38B0000102BF061A38B400000003F9
+:10102000041A38C0000102C0061A38C400000003C8
+:10103000041A38D0000102C1061A38D40000000397
+:10104000041A38E0000102C2061A38E40000000366
+:10105000041A38F0000102C3061A38F40000000335
+:10106000041A3900000102C4061A39040000000302
+:10107000041A3910000102C5061A391400000003D1
+:10108000041A3920000102C6061A392400000003A0
+:10109000041A3930000102C7061A3934000000036F
+:1010A000041A3940000102C8061A3944000000033E
+:1010B000041A3950000102C9061A3954000000030D
+:1010C000041A3960000102CA061A396400000003DC
+:1010D000041A3970000102CB061A397400000003AB
+:1010E000041A3980000102CC061A3984000000037A
+:1010F000041A3990000102CD061A39940000000349
+:10110000041A39A0000102CE061A39A40000000317
+:10111000041A39B0000102CF061A39B400000003E6
+:10112000041A39C0000102D0061A39C400000003B5
+:10113000041A39D0000102D1061A39D40000000384
+:10114000041A39E0000102D2061A39E40000000353
+:10115000041A39F0000102D3061A39F40000000322
+:10116000041A3A00000102D4061A3A0400000003EF
+:10117000041A3A10000102D5061A3A1400000003BE
+:10118000041A3A20000102D6061A3A24000000038D
+:10119000041A3A30000102D7061A3A34000000035C
+:1011A000041A3A40000102D8061A3A44000000032B
+:1011B000041A3A50000102D9061A3A5400000003FA
+:1011C000041A3A60000102DA061A3A6400000003C9
+:1011D000041A3A70000102DB061A3A740000000398
+:1011E000041A3A80000102DC061A3A840000000367
+:1011F000041A3A90000102DD061A3A940000000336
+:10120000041A3AA0000102DE061A3AA40000000304
+:10121000041A3AB0000102DF061A3AB400000003D3
+:10122000041A3AC0000102E0061A3AC400000003A2
+:10123000041A3AD0000102E1061A3AD40000000371
+:10124000041A3AE0000102E2061A3AE40000000340
+:10125000041A3AF0000102E3061A3AF4000000030F
+:10126000041A3B00000102E4061A3B0400000003DC
+:10127000041A3B10000102E5061A3B1400000003AB
+:10128000041A3B20000102E6061A3B24000000037A
+:10129000041A3B30000102E7061A3B340000000349
+:1012A000041A3B40000102E8061A3B440000000318
+:1012B000041A3B50000102E9061A3B5400000003E7
+:1012C000041A3B60000102EA061A3B6400000003B6
+:1012D000041A3B70000102EB061A3B740000000385
+:1012E000041A3B80000102EC061A3B840000000354
+:1012F000041A3B90000102ED061A3B940000000323
+:10130000041A3BA0000102EE061A3BA400000003F1
+:10131000041A3BB0000102EF061A3BB400000003C0
+:10132000041A3BC0000102F0061A3BC4000000038F
+:10133000041A3BD0000102F1061A3BD4000000035E
+:10134000041A3BE0000102F2061A3BE4000000032D
+:10135000041A3BF0000102F3061A3BF400000003FC
+:10136000041A3C00000102F4061A3C0400000003C9
+:10137000041A3C10000102F5061A3C140000000398
+:10138000041A3C20000102F6061A3C240000000367
+:10139000041A3C30000102F7061A3C340000000336
+:1013A000041A3C40000102F8061A3C440000000305
+:1013B000041A3C50000102F9061A3C5400000003D4
+:1013C000041A3C60000102FA061A3C6400000003A3
+:1013D000041A3C70000102FB061A3C740000000372
+:1013E000041A3C80000102FC061A3C840000000341
+:1013F000041A3C90000102FD061A3C940000000310
+:10140000041A3CA0000102FE061A3CA400000003DE
+:10141000041A3CB0000102FF061A3CB400000003AD
+:10142000041A3CC000010300061A3CC4000000037B
+:10143000041A3CD000010301061A3CD4000000034A
+:10144000041A3CE000010302061A3CE40000000319
+:10145000041A3CF000010303061A3CF400000003E8
+:10146000041A3D0000010304061A3D0400000003B5
+:10147000041A3D1000010305061A3D140000000384
+:10148000041A3D2000010306061A3D240000000353
+:10149000041A3D3000010307061A3D340000000322
+:1014A000041A3D4000010308061A3D4400000003F1
+:1014B000041A3D5000010309061A3D5400000003C0
+:1014C000041A3D600001030A061A3D64000000038F
+:1014D000041A3D700001030B061A3D74000000035E
+:1014E000041A3D800001030C061A3D84000000032D
+:1014F000041A3D900001030D061A3D9400000003FC
+:10150000041A3DA00001030E061A3DA400000003CA
+:10151000041A3DB00001030F061A3DB40000000399
+:10152000041A3DC000010310061A3DC40000000368
+:10153000041A3DD000010311061A3DD40000000337
+:10154000041A3DE000010312061A3DE40000000306
+:10155000041A3DF000010313061A3DF400000003D5
+:10156000041A3E0000010314061A3E0400000003A2
+:10157000041A3E1000010315061A3E140000000371
+:10158000041A3E2000010316061A3E240000000340
+:10159000041A3E3000010317061A3E34000000030F
+:1015A000041A3E4000010318061A3E4400000003DE
+:1015B000041A3E5000010319061A3E5400000003AD
+:1015C000041A3E600001031A061A3E64000000037C
+:1015D000041A3E700001031B061A3E74000000034B
+:1015E000041A3E800001031C061A3E84000000031A
+:1015F000041A3E900001031D061A3E9400000003E9
+:10160000041A3EA00001031E061A3EA400000003B7
+:10161000041A3EB00001031F061A3EB40000000386
+:10162000041A3EC000010320061A3EC40000000355
+:10163000041A3ED000010321061A3ED40000000324
+:10164000041A3EE000010322061A3EE400000003F3
+:10165000041A3EF000010323061A3EF400000003C2
+:10166000041A3F0000010324061A3F04000000038F
+:10167000041A3F1000010325061A3F14000000035E
+:10168000041A3F2000010326061A3F24000000032D
+:10169000041A3F3000010327061A3F3400000003FC
+:1016A000041A3F4000010328061A3F4400000003CB
+:1016B000041A3F5000010329061A3F54000000039A
+:1016C000041A3F600001032A061A3F640000000369
+:1016D000041A3F700001032B061A3F740000000338
+:1016E000041A3F800001032C061A3F840000000307
+:1016F000041A3F900001032D061A3F9400000003D6
+:10170000041A3FA00001032E061A3FA400000003A4
+:10171000041A3FB00001032F061A3FB40000000373
+:10172000041A3FC000010330061A3FC40000000342
+:10173000041A3FD000010331061A3FD40000000311
+:10174000041A3FE000010332061A3FE400000007DC
+:10175000041A4CB000080333061A400000000124AC
+:10176000021A492000000000061A2500000000109F
+:10177000061A258000000012061A09C00000004861
+:10178000061A080000000002061A082000000012D5
+:10179000041A2FB00002033B041A4CF00002033D70
+:1017A000061A500000000004061A449000000124AC
+:1017B000021A492400000000061A2540000000100B
+:1017C000061A25C800000012061A0AE000000048A8
+:1017D000061A081000000002061A0868000000122D
+:1017E000041A2FB80002033F041A4CF80002034108
+:1017F000061A5010000000040200A468000AFFDC72
+:101800000200A280000000010200A294071D29111D
+:101810000200A298000000000200A29C009C042488
+:101820000200A2A0000000000200A2A40000020921
+:101830000200A4FCFF000000020100B4000000014F
+:10184000020100B800000001020100DC00000001FC
+:10185000020101000000000102010104000000017A
+:101860000201007C0030000002010084000000281A
+:101870000201008C000000000201013000000004A1
+:101880000201025C000000010201032800000000C8
+:101890000201055400000030020100C400000001F4
+:1018A000020100CC00000001020100F8000000016C
+:1018B000020100F000000001020100800030000081
+:1018C00002010088000000280201009000000000D2
+:1018D0000201013400000004020102DC00000001EA
+:1018E0000201032C0000000002010564000000302A
+:1018F000020100C800000001020100D00000000148
+:10190000020100FC00000001020100F400000001DF
+:10191000020C100000000028020C200800000A1130
+:10192000020C200C00000A00020C201000000A0427
+:10193000020C201C0000FFFF020C20200000FFFF13
+:10194000020C20240000FFFF020C20280000FFFFF3
+:10195000020C203800000020020C203C0000002176
+:10196000020C204000000022020C20440000002352
+:10197000020C204800000024020C204C000000252E
+:10198000020C205000000026020C2054000000270A
+:10199000020C205800000028020C205C00000029E6
+:1019A000020C20600000002A020C20640000002BC2
+:1019B000020C20680000002C020C206C0000002D9E
+:1019C000020C20700000002E020C20740000002F7A
+:1019D000020C207800000010060C207C0000004F54
+:1019E000020C21B800000001020C21BC0000000123
+:1019F000020C21C000000001020C21C40000000103
+:101A0000020C21C800000001020C21CC00000001E2
+:101A1000020C21D000000001020C21D400000001C2
+:101A2000020C21D800000001020C21DC00000001A2
+:101A3000020C21E000000001020C21E40000000182
+:101A4000020C21E800000001020C21EC0000000162
+:101A5000020C21F000000001020C21F40000000142
+:101A6000020C21F800000001060C21FC0000000F10
+:101A7000020C223807FFFFFF020C223C0000003F4F
+:101A8000020C224007FFFFFF020C22440000000F5F
+:101A9000010C224800000000010C224C0000000054
+:101AA000010C225000000000010C22540000000034
+:101AB000010C225800000000010C225C0000000014
+:101AC000010C226000000000010C226400000000F4
+:101AD000010C226800000000010C226C00000000D4
+:101AE000010C227000000000010C227400000000B4
+:101AF000010C227800000000010C227C0000000094
+:101B0000020C24BC000000010C0C2000000003E8C3
+:101B10000A0C2000000000010B0C20000000000A4D
+:101B2000020C400800000562020C400C0000055148
+:101B3000020C401000000555020C40140000057214
+:101B4000020C401C0000FFFF020C40200000FFFFC1
+:101B5000020C40240000FFFF020C40280000FFFFA1
+:101B6000020C403800000046020C403C0000000C13
+:101B7000060C40400000005E020C41B8000000016D
+:101B8000060C41BC0000001F020C423807FFFFFF9B
+:101B9000020C423C0000003F020C424007FFFFFFE6
+:101BA000020C42440000000F010C424800000000FB
+:101BB000010C424C00000000010C425000000000EB
+:101BC000010C425400000000010C425800000000CB
+:101BD000010C425C00000000010C426000000000AB
+:101BE000010C426400000000010C4268000000008B
+:101BF000010C426C00000000010C4270000000006B
+:101C0000010C427400000000010C4278000000004A
+:101C1000010C427C00000000010C4280000000002A
+:101C2000020C44C0000000010C0C4000000003E85E
+:101C30000A0C4000000000010B0C40000000000AEC
+:101C4000060D400000000A00020D004400000032B2
+:101C5000020D008C02150020020D009002150020DC
+:101C6000020D009408100000020D009800000033DF
+:101C7000020D009C00000002020D00A00000000008
+:101C8000020D00A400000005020D00A800000005E0
+:101C9000060D00AC00000002020D00B400000002BE
+:101CA000020D00B800000003020D00BC000000029D
+:101CB000020D00C000000001020D00C8000000027B
+:101CC000020D00CC00000002020D015C00000001CA
+:101CD000020D016400000001020D01680000000215
+:101CE000020D020400000001020D020C00000020A1
+:101CF000020D021000000040020D0214000000401E
+:101D0000020D022000000003020D02240000001852
+:101D1000060D028000000012040D030000180343AA
+:101D2000060D03600000000C020D004C00000001D5
+:101D3000020D005000000002020D005400000000DF
+:101D4000020D005800000008060D005C00000004B1
+:101D5000020D00C400000004020D0114000000097F
+:101D6000020D011800000029020D011C0000000AEC
+:101D7000020D01200000002A020D012400000000D5
+:101D8000020D012800000020020D012C00000000BF
+:101D9000020D013000000020020D0134000000009F
+:101DA000020D013800000020020D013C000000007F
+:101DB000020D014000000020020D0144000000005F
+:101DC000020D014800000020020D00040000000187
+:101DD000020D000800000001020D000C00000001CF
+:101DE000020D001000000001020D001400000001AF
+:101DF000020D001800000001020D001C000000018F
+:101E0000020D002000000001020D0024000000016E
+:101E1000020D002800000001020D002C000000014E
+:101E2000020D003000000001020D0034000000012E
+:101E3000020D003800000001020D003C000000010E
+:101E4000060E200000000800020E004C00000032C8
+:101E5000020E009402150020020E009802150020C8
+:101E6000020E009C00000030020E00A008100000CE
+:101E7000020E00A400000033020E00A80000003093
+:101E8000020E00AC00000031020E00B000000002A3
+:101E9000020E00B400000004020E00B800000000B2
+:101EA000020E00BC00000002020E00C00000000292
+:101EB000020E00C400000000020E00C80000000274
+:101EC000020E00CC00000007020E00D0000000024D
+:101ED000020E00D400000002020E00D80000000133
+:101EE000020E014400000001020E014C000000013E
+:101EF000020E015000000002020E02040000000168
+:101F0000020E020C00000040020E02100000004011
+:101F1000020E021C00000004020E0220000000203D
+:101F2000020E02240000000E020E02280000001B18
+:101F3000060E030000000012040E0280001B035B6B
+:101F4000060E02EC00000005020E00540000000C1A
+:101F5000020E00580000000C020E005C00000000A1
+:101F6000020E006000000010060E00640000000475
+:101F7000020E00DC00000003020E01100000000F42
+:101F8000020E01140000002F020E011800000000D4
+:101F9000020E011C00000020020E000400000001DF
+:101FA000020E000800000001020E000C00000001FB
+:101FB000020E001000000001020E001400000001DB
+:101FC000020E001800000001020E001C00000001BB
+:101FD000020E002000000001020E0024000000019B
+:101FE000020E002800000001020E002C000000017B
+:101FF000020E003000000001020E0034000000015B
+:10200000020E003800000001020E003C000000013A
+:10201000020E004000000001020E0044000000011A
+:102020000730040000AF0000083007680013037693
+:10203000073400003305000007348000327F0CC2F3
+:10204000073500001A951962083539E058C403783D
+:10205000013000000000000001300004000000001A
+:1020600001300008000000000130000C00000000FA
+:1020700001300010000000000130001400000000DA
+:1020800002300020000000010230002400000002A5
+:1020900002300028000000030230002C0000000085
+:1020A0000230003000000004023000340000000163
+:1020B00002300038000000000230003C0000000147
+:1020C0000230004000000004023000440000000024
+:1020D00002300048000000010230004C0000000304
+:1020E00002300050000000000230005400000001E7
+:1020F00002300058000000040230005C00000000C4
+:1021000002300060000000010230006400000003A3
+:1021100002300068000000000230006C0000000186
+:102120000230007000000004023000740000000063
+:1021300002300078000000040230007C0000000340
+:102140000630008000000002023000A400003FFFC3
+:10215000023000A8000003FF02300224000000004B
+:1021600002300234000000000230024C0000000087
+:10217000023002E40000FFFF0630200000000800EB
+:1021800002338BC000000001023380000000001AFF
+:10219000023380400000004E0233808000000010B7
+:1021A000023380C0000000200C3383000007A12010
+:1021B0000A338300000001380B33830000001388CA
+:1021C0000A338340000000000C338340000001F418
+:1021D0000B33834000000005023383800007A120F9
+:1021E000023383C0000001F406322A88000000C2D6
+:1021F00006322008000000C806322000000000025D
+:10220000063223E80000004004322E580004037A0E
+:10221000063250A000000004063250B80000000250
+:102220000632508000000006043250980002037EFF
+:10223000063250000000002006323000000004008A
+:1022400006321C0000000004043218300002038033
+:10225000063224E8000000B402322DB00000000075
+:1022600006324000000000B40632300000000020BA
+:10227000063231000000002006323200000000204B
+:102280000632330000000020063234000000002037
+:102290000632350000000020063236000000002023
+:1022A000063237000000002006323800000000200F
+:1022B000063239000000002006323A0000000020FB
+:1022C00006323B000000002006323C0000000020E7
+:1022D00006323D000000002006323E0000000020D3
+:1022E00006323F000000002006321C1000000002F1
+:1022F000063245A000000024063227B8000000B4D2
+:1023000002322DB400000000063242D0000000B4BA
+:1023100006323080000000200632318000000020AC
+:102320000632328000000020063233800000002098
+:102330000632348000000020063235800000002084
+:102340000632368000000020063237800000002070
+:10235000063238800000002006323980000000205C
+:1023600006323A800000002006323B800000002048
+:1023700006323C800000002006323D800000002034
+:1023800006323E800000002006323F800000002020
+:1023900006321C20000000020632463000000024F5
+:1023A0000720040000870000082007800010038237
+:1023B000072400003165000007248000081D0C5A26
+:1023C00008248EB06C9003840120000000000000FF
+:1023D00001200004000000000120000800000000AF
+:1023E0000120000C0000000001200010000000008F
+:1023F0000120001400000000022000200000000165
+:102400000220002400000002022000280000000337
+:102410000220002C00000000022000300000000418
+:1024200002200034000000010220003800000000FB
+:102430000220003C000000010220004000000004D7
+:1024400002200044000000000220004800000001BB
+:102450000220004C00000003022000500000000099
+:102460000220005400000001022000580000000477
+:102470000220005C0000000002200060000000015B
+:102480000220006400000003022000680000000039
+:102490000220006C00000001022000700000000417
+:1024A00002200074000000000220007800000004F8
+:1024B0000220007C000000030620008000000002D3
+:1024C000022000A400003FFF022000A8000003FF3C
+:1024D000022002240000000002200234000000005C
+:1024E0000220024C00000000022002E40000FFFF76
+:1024F000062020000000080002238BC0000000011D
+:10250000022380000000001002238040000000121F
+:102510000223808000000030022380C00000000EF3
+:102520000C2383000007A1200A2383000000013848
+:102530000B238300000013880A238340000000005F
+:102540000C238340000001F40B23834000000005AE
+:10255000022383800007A120022383C0000001F42E
+:10256000062250000000004206222008000000C899
+:10257000062220000000000206224000000000C6E3
+:1025800004224318000503860622432C0000000B9A
+:10259000042243580005038B0622436C0000000B05
+:1025A0000422439800050390062243AC0000000B70
+:1025B000042243D800050395062243EC0000000BDB
+:1025C000042244180005039A0622442C0000000B44
+:1025D000042244580005039F0622446C0000000BAF
+:1025E00004224498000503A4062244AC0000000B1A
+:1025F000042244D8000503A9062244EC0000000B85
+:1026000004224518000503AE0622452C0000000BED
+:1026100004224558000503B30622456C0000000B58
+:1026200004224598000503B8062245AC0000000BC3
+:10263000042245D8000503BD062245EC0000000B2E
+:1026400004224618000503C20622462C0000000B97
+:1026500004224658000503C70622466C0000000B02
+:1026600004224698000503CC062246AC0000000B6D
+:10267000042246D8000503D1062246EC0000000BD8
+:1026800004224718000503D60622472C0000000B41
+:1026900004224758000503DB0622476C0000000BAC
+:1026A00004224798000503E0062247AC0000000B17
+:1026B000042247D8000503E5062247EC0000000B82
+:1026C00004224818000503EA0622482C0000000BEB
+:1026D00004224858000503EF0622486C0000000B56
+:1026E00004224898000503F4062248AC0000000BC1
+:1026F000042248D8000503F9062248EC0000000B2C
+:1027000004224918000503FE0622492C0000000B94
+:1027100004224958000504030622496C0000000BFE
+:102720000422499800050408062249AC0000000B69
+:10273000042249D80005040D062249EC0000000BD4
+:1027400004224A180005041206224A2C0000000B3D
+:1027500004224A580005041706224A6C0000000BA8
+:1027600004224A980005041C06224AAC0000000B13
+:1027700004224AD80005042106224AEC0000000584
+:1027800006224B000000001704224B5C00010426C7
+:1027900006224B600000000304224B6C000104275A
+:1027A000062238000000004006223000000002002F
+:1027B000042251C00004042806221000000000C0BA
+:1027C000062215C00000024004221EC80008042C86
+:1027D0000622390000000008022251180000000003
+:1027E000062251D00000000606221300000000025D
+:1027F00006221410000000300622392000000008D4
+:102800000222511C00000000062251E800000006D0
+:102810000622130800000002062214D00000003037
+:102820000216100000000028021700080000000235
+:102830000217002C000000030217003C00000004F7
+:1028400002170044000000000217004800000002C8
+:102850000217004C0000009002170050000000908A
+:102860000217005400800090021700580810000062
+:10287000021700600000008A021700640000008058
+:1028800002170068000000810217006C0000008041
+:10289000021700700000000602170078000007D041
+:1028A0000217007C0000076C02170038007C10043F
+:1028B000021700040000000F06164024000000026A
+:1028C000021640700000001C0216420800000001C1
+:1028D0000216421000000001021642200000000112
+:1028E00002164228000000010216423000000001DA
+:1028F000021642380000000102164260000000018A
+:102900000C16401C0003D0900A16401C0000009CCE
+:102910000B16401C000009C40216403000000008DD
+:10292000021640340000000C02164038000000106F
+:102930000216404400000020021640000000000182
+:10294000021640D8000000010216400800000001F5
+:102950000216400C000000010216401000000001A9
+:10296000021642400000000002164248000000002B
+:1029700006164270000000020216425000000000DD
+:1029800002164258000000000616428000000002B5
+:1029900002166008000006140216600C0000060013
+:1029A00002166010000006040216601C0000FFFF03
+:1029B000021660200000FFFF021660240000FFFFE7
+:1029C000021660280000FFFF021660380000002099
+:1029D0000216603C00000020061660400000000265
+:1029E00002166048000000230216604C000000241C
+:1029F00002166050000000250216605400000026F8
+:102A000002166058000000270216605C00000029D2
+:102A1000021660600000002A021660640000002BAD
+:102A2000021660680000002C0216606C0000002D89
+:102A30000616607000000012021660B80000000167
+:102A4000021660BC00000001061660C00000003ED7
+:102A5000021661B800000001061661BC0000001FEC
+:102A60000216623807FFFFFF0216623C0000003FBB
+:102A70000216624007FFFFFF021662440000000FCB
+:102A800001166248000000000116624C00000000C0
+:102A900001166250000000000116625400000000A0
+:102AA00001166258000000000116625C0000000080
+:102AB0000116626000000000011662640000000060
+:102AC00001166268000000000116626C0000000040
+:102AD0000116627000000000011662740000000020
+:102AE00001166278000000000116627C0000000000
+:102AF000021664BC000000010C166000000003E830
+:102B00000A166000000000010B1660000000000AB9
+:102B100002168040000000060216804400000005F6
+:102B2000021680480000000A0216804C00000005D2
+:102B30000216805400000002021680CC000000043F
+:102B4000021680D000000004021680D400000004A9
+:102B5000021680D800000004021680DC0000000489
+:102B6000021680E000000004021680E40000000469
+:102B7000021680E800000004021688040000000429
+:102B8000021680300000007C021680340000003DF8
+:102B9000021680380000003F0216803C0000009CB6
+:102BA000021680F000000007061680F40000000501
+:102BB0000216880C010101010216810800000000C4
+:102BC0000216810C000000040216811000000004AF
+:102BD0000216811400000002021688100801200469
+:102BE00002168118000000050216811C0000000575
+:102BF0000216812000000005021681240000000555
+:102C00000216882C200810010216812800000008F6
+:102C10000216812C00000006021681300000000719
+:102C200002168134000000000216883001010120E4
+:102C300006168138000000040216883401010101E3
+:102C400006168148000000040216883801010101BF
+:102C500006168158000000040216883C010101019B
+:102C6000061681680000000302168174000000014E
+:102C7000021688400101010102168178000000015E
+:102C80000216817C00000001021681800000000114
+:102C9000021681840000000102168844010101012E
+:102CA00002168188000000010216818C00000004D9
+:102CB00002168190000000040216819400000002B8
+:102CC00002168848080120040216819800000005B9
+:102CD0000216819C00000005021681A0000000057C
+:102CE000021681A4000000050216881420081001B5
+:102CF000021681A800000008021681AC0000000640
+:102D0000021681B000000007021681B40000000125
+:102D10000216881801010120021681B80000000186
+:102D2000021681BC00000001021681C000000001F3
+:102D3000021681C4000000010216881C0101010175
+:102D4000021681C800000001021681CC00000001BB
+:102D5000021681D000000001021681D4000000019B
+:102D60000216882001010101021681D8000000012D
+:102D7000021681DC00000001021681E00000000163
+:102D8000021681E4000000010216882401010101FD
+:102D9000021681E800000001021681EC000000012B
+:102DA000021681F0000000010216882801010101CD
+:102DB00002168240FFFF003F061682440000000218
+:102DC0000216824CFFFF003F0216825000000100F5
+:102DD000021682540000010006168258000000020C
+:102DE00002168260000000C002168264000000C06B
+:102DF0000216826800001E000216826C00001E008F
+:102E0000021682700000400002168274000040002A
+:102E100002168278000080000216827C000080008A
+:102E2000021682800000200002168284000020002A
+:102E30000616828800000007021682A40000000126
+:102E4000061682A80000000A021681F400000C0891
+:102E5000021681F800000040021681FC000001000B
+:102E600002168200000000200216820400000017F3
+:102E700002168208000000800216820C0000020088
+:102E8000021682100000000002168218FFFF01FFE8
+:102E900002168214FFFF01FF0216823C000000139D
+:102EA000021680900000013F021680600000014081
+:102EB00002168064000001400616806800000002CF
+:102EC00002168070000000C0061680740000000723
+:102ED0000216809C00000048021680A000000048F6
+:102EE000061680A400000002021680AC0000004814
+:102EF000061680B00000000702168238000080002D
+:102F000002168234000025E40216809400007FFF40
+:102F100002168220000000070216821C0000000733
+:102F2000021682280000000002168224FFFFFFFF25
+:102F300002168230000000000216822CFFFFFFFF05
+:102F4000021680EC000000FF0214000000000001E7
+:102F50000214000C000000010214004000000001F7
+:102F60000214004400007FFF0214000C0000000067
+:102F700002140000000000000214006C00000000B9
+:102F800002140004000000010214003000000001DF
+:102F900002140004000000000214005C00000000A5
+:102FA00002140008000000010214003400000001B7
+:102FB000021400080000000002140060000000007D
+:102FC00006028000000020000202005800000032CB
+:102FD000020200A003150020020200A40315002035
+:102FE000020200A801000030020200AC081000003C
+:102FF000020200B000000033020200B40000003002
+:10300000020200B800000031020200BC0000000310
+:10301000020200C000000006020200C4000000031B
+:10302000020200C800000003020200CC00000002FF
+:10303000020200D000000000020200D400000002E2
+:10304000020200DC00000000020200E000000006B6
+:10305000020200E400000004020200E80000000296
+:10306000020200EC00000002020200F00000000179
+:10307000020200FC00000006020201200000000025
+:103080000202013400000002020201B0000000014F
+:103090000202020C00000001020202140000000102
+:1030A00002020218000000020202040400000001F3
+:1030B0000202040C00000040020204100000004064
+:1030C0000202041C00000004020204200000002090
+:1030D0000202042400000002020204280000001F73
+:1030E00006020500000000120402048000200434DF
+:1030F000020200600000000F0202006400000007EE
+:1031000002020068000000000202006C0000000ED5
+:103110000602007000000004020200F40000000437
+:103120000202000400000001020200080000000189
+:103130000202000C00000001020200100000000169
+:103140000202001400000001020200180000000149
+:103150000202001C00000001020200200000000129
+:103160000202002400000001020200280000000109
+:103170000202002C000000010202003000000001E9
+:1031800002020034000000010202003800000001C9
+:103190000202003C000000010202004000000001A9
+:1031A0000202004400000001020200480000000189
+:1031B0000202004C00000001020200500000000169
+:1031C00002020108000000C802020118000000020B
+:1031D000020201C400000000020201CC0000000055
+:1031E000020201D400000002020201DC0000000221
+:1031F000020201E4000000FF020201EC000000FFF7
+:103200000202010C000000C80202011C00000002C2
+:10321000020201C800000000020201D0000000000C
+:10322000020201D800000002020201E000000002D8
+:10323000020201E8000000FF020201F0000000FFAE
+:1032400007280400008E00000828076800130454B3
+:10325000072C000033C80000072C800038050CF351
+:10326000072D000038B61AF5072D800007762923B0
+:10327000082D8CB04E6A04560128000000000000A2
+:1032800001280004000000000128000800000000E0
+:103290000128000C000000000128001000000000C0
+:1032A0000128001400000000022800200000000196
+:1032B0000228002400000002022800280000000369
+:1032C0000228002C0000000002280030000000044A
+:1032D000022800340000000102280038000000002D
+:1032E0000228003C00000001022800400000000409
+:1032F00002280044000000000228004800000001ED
+:103300000228004C000000030228005000000000CA
+:1033100002280054000000010228005800000004A8
+:103320000228005C0000000002280060000000018C
+:10333000022800640000000302280068000000006A
+:103340000228006C00000001022800700000000448
+:103350000228007400000000022800780000000429
+:103360000228007C00000003062800800000000204
+:10337000022800A400003FFF022800A8000003FF6D
+:10338000022802240000000002280234000000008D
+:103390000228024C00000000022802E40000FFFFA7
+:1033A0000628200000000800022B8BC0000000014E
+:1033B000022B800000000000022B8040000000185B
+:1033C000022B80800000000C022B80C000000066F1
+:1033D0000C2B83000007A1200A2B8300000001387A
+:1033E0000B2B8300000013880A2B83400000000091
+:1033F0000C2B8340000001F40B2B834000000005E0
+:10340000022B83800007A120022B83C0000001F45F
+:10341000062A3D4800000004042A3D5800020458D2
+:10342000062A3D6000000006062A30000000004821
+:10343000062A2008000000C8062A2000000000021A
+:10344000062A31280000008E062A33680000000397
+:10345000042A33740001045A062A3A780000000254
+:10346000042A3A800002045B042A3A700002045DD8
+:10347000042A3E280002045F042A3EB000040461CE
+:10348000042A250000020465062A25080000010020
+:10349000062A297000000004042A29600004046739
+:1034A000042A2F480002046B062A3378000000D853
+:1034B000022A3A3800000000062A3A88000000324A
+:1034C000042A3D880010046D062A502000000002E6
+:1034D000062A503000000002062A500000000002B8
+:1034E000062A501000000002022A50B80000000115
+:1034F000062A50480000000E042A3D780002047D90
+:10350000062A3C1800000026022A50400000000055
+:10351000062A36D8000000D8022A3A3C00000000F3
+:10352000062A3B5000000032042A3DC80010047FE8
+:10353000062A502800000002062A50380000000227
+:10354000062A500800000002062A50180000000257
+:10355000022A50BC00000001062A50800000000E24
+:10356000042A3D800002048F062A3CB00000002699
+:10357000022A504400000000021010080000000160
+:103580000210101000000264021010000003D000AE
+:10359000021010040000003D091018000200049100
+:1035A00009101100001006910610114000000008DB
+:1035B00009101160000806A1061011800000000229
+:1035C00009101188000606A9061011A000000018B5
+:1035D000021010100000000006102400000000E09F
+:1035E0000210201C0000000002102020000000013A
+:1035F000021020C0000000010210200400000001A1
+:10360000021020080000000109103C00000506AF70
+:1036100009103C20000506B409103800000506B961
+:1036200002104028000000100210404400003FFF3C
+:103630000210405800280000021040840084924A82
+:1036400006104C000000010002104058000000006D
+:103650000610806800000004021080000000108046
+:1036600006108028000000020210803800000010C0
+:10367000021080400000FFFF021080440000FFFFA6
+:1036800002108050000000000210810000000000C5
+:10369000061081200000000202108008000002B520
+:1036A0000210801000000000061082000000004A96
+:1036B000021081080001FFFF061081400000000297
+:1036C0000210800000001A80061090000000002404
+:1036D000061091200000004A061093700000004A76
+:1036E000061095C00000004A0210800400001080FF
+:1036F00006108030000000020210803C0000001024
+:10370000021080480000FFFF0210804C0000FFFF05
+:10371000021080540000000002108104000000002C
+:1037200006108128000000020210800C000002B583
+:103730000210801400000000061084000000004AFF
+:103740000210810C0001FFFF0610814800000002FA
+:103750000210800400001A800610909000000024DF
+:10376000061092480000004A061094980000004A93
+:10377000061096E80000004A0212049000E383401D
+:103780000212051400003C10021205200000000285
+:1037900002120494FFFFFFFF02120498FFFFFFFFD5
+:1037A0000212049CFFFFFFFF021204A0FFFFFFFFB5
+:1037B000021204A4FFFFFFFF021204A8FFFFFFFF95
+:1037C000021204ACFFFFFFFF021204B0FFFFFFFF75
+:1037D000021204B8FFFFFFFF021204BCFFFFFFFF4D
+:1037E000021204C0FFFFFFFF021204C4FFFFFFFF2D
+:1037F000021204C8FFFFFFFF021204CCFFFFFFFF0D
+:10380000021204D0FFFFFFFF021204DCFFFFFFFFE4
+:10381000021204E0FFFFFFFF021204E4FFFFFFFFBC
+:10382000021204E8FFFFFFFF021204ECFFFFFFFF9C
+:10383000021204F0FFFFFFFF021204F4FFFFFFFF7C
+:10384000021204F8FFFFFFFF021204FCFFFFFFFF5C
+:1038500002120500FFFFFFFF02120504FFFFFFFF3A
+:1038600002120508FFFFFFFF0212050CFFFFFFFF1A
+:1038700002120510FFFFFFFF021204D4FFFF3330D6
+:10388000021204D8FFFF3340021204B4F0003000EB
+:1038900002120390000000080212039C00000008BE
+:1038A000061203A000000002021203BC0000000484
+:1038B000021203C400000004021203D00000000042
+:1038C000021203DC000000000212036C0000000181
+:1038D000021203680000003F021201BC0000004019
+:1038E000021201C000001808021201C400000803FF
+:1038F000021201C800000803021201CC00000040BF
+:10390000021201D000000003021201D400000803DB
+:10391000021201D800000803021201DC00000803B3
+:10392000021201E000010003021201E4000008039A
+:10393000021201E800000803021201EC000000037B
+:10394000021201F000000003021201F40000000363
+:10395000021201F800000003021201FC0000000343
+:103960000212020000000003021202040000000321
+:1039700002120208000000030212020C0000000301
+:1039800002120210000000030212021400000003E1
+:1039900002120218000000030212021C00000003C1
+:1039A00002120220000000030212022400000003A1
+:1039B00002120228000024030212022C0000002F31
+:1039C0000212023000000009021202340000001945
+:1039D00002120238000001840212023C000001833E
+:1039E0000212024000000306021202440000001905
+:1039F00002120248000000060212024C00000306F8
+:103A000002120250000003060212025400000306D4
+:103A10000212025800000C860212025C000003062B
+:103A20000212026000000306021202640000000697
+:103A300002120268000000060212026C000000067A
+:103A4000021202700000000602120274000000065A
+:103A500002120278000000060212027C000000063A
+:103A6000021202800000000602120284000000061A
+:103A700002120288000000060212028C00000006FA
+:103A800002120290000000060212029400000006DA
+:103A900002120298000000060212029C00000006BA
+:103AA000021202A000000306021202A4000000138A
+:103AB000021202A800000006021202B00000100468
+:103AC000021202B400001004021203240010644029
+:103AD0000212032800106440021201B0000000012D
+:103AE0000600A000000000160200A06CBF5C0000F1
+:103AF0000200A070FFF51FEF0200A0740000FFFF9E
+:103B00000200A078F00003E00200A07C00000000AA
+:103B10000200A0800000A0000600A08400000005B4
+:103B20000200A0980FE000000600A09C0000001416
+:103B30000200A0EC555400000200A0F05555555568
+:103B40000200A0F4000055550200A0F8F0000000AB
+:103B50000200A0FC555400000200A1005555555527
+:103B60000200A104000055550200A108F000000069
+:103B70000600A22C000000040200A0600000030761
+:103B80000200A10CBF5C00000200A110FFF51FEFB6
+:103B90000200A1140000FFFF0200A118F00003E0E2
+:103BA0000200A11C000000000200A1200000A000F3
+:103BB0000600A124000000050200A1380FE000006B
+:103BC0000600A13C000000140200A18C5554000026
+:103BD0000200A190555555550200A194000055557D
+:103BE0000200A198F00000000200A19C55540000C2
+:103BF0000200A1A0555555550200A1A4000055553D
+:103C00000200A1A8F00000000600A23C0000000491
+:103C10000200A06400000307000000000000000094
+:103C20000000002E00000000000000000000000066
+:103C30000000000000000000000000000000000084
+:103C40000000000000000000000000000000000074
+:103C50000000000000000000000000000000000064
+:103C60000000000000000000000000000000000054
+:103C70000000000000000000002E004D00000000C9
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA00000000000004D008B00000000000000003C
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000008B009000900094009400980000000079
+:103CE00000000000000000000000000000000000D4
+:103CF000000000000000000000000000009802DE4C
+:103D000002DE02E802E802F200000000000000000B
+:103D100000000000000000000000000000000000A3
+:103D20000000000000000000000000000000000093
+:103D30000000000000000000000000000000000083
+:103D40000000000000000000000000000000000073
+:103D50000000000000000000000000000000000063
+:103D60000000000000000000000000000000000053
+:103D70000000000000000000000000000000000043
+:103D80000000000000000000000000000000000033
+:103D90000000000000000000000000000000000023
+:103DA0000000000000000000000000000000000013
+:103DB0000000000000000000000000000000000003
+:103DC00000000000000000000000000000000000F3
+:103DD000000000000000000002F202FA00000000F3
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E000000000000000000000000000000000000B2
+:103E100000000000000000000000000000000000A2
+:103E20000000000000000000000000000000000092
+:103E300002FA02FF02FF030A030A03150000000052
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E60000000000000000000000000000000000052
+:103E70000000000000000000000000000000000042
+:103E80000000000000000000031503160000000001
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB000000000000316035700000000000000008F
+:103EC00000000000000000000000000000000000F2
+:103ED00000000000000000000000000000000000E2
+:103EE0000357037B000000000000000000000000FA
+:103EF00000000000000000000000000000000000C2
+:103F0000000000000000000000000000037B03BB75
+:103F100000000000000000000000000000000000A1
+:103F20000000000000000000000000000000000091
+:103F3000000000000000000003BB03F700000000C9
+:103F40000000000000000000000000000000000071
+:103F50000000000000000000000000000000000061
+:103F60000000000003F7043D043D045204520467BE
+:103F70000000000000000000000000000000000041
+:103F80000000000000000000000000000000000031
+:103F9000046704ED04ED04F204F204F700000000ED
+:103FA0000000000000000000000000000000000011
+:103FB00000000000000000000000000004F704F80A
+:103FC00000000000000000000000000000000000F1
+:103FD00000000000000000000000000000000000E1
+:103FE000000000000000000004F8050A00000000C6
+:103FF00000000000000000000000000000000000C1
+:1040000000000000000000000000000000000000B0
+:1040100000000000050A051F051F052205220525D1
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:1040400005250555000000000000000000000000EC
+:104050000000000000000000000000000000000060
+:10406000000000000000000000000000055505DC15
+:104070000000000000000000000000000000000040
+:104080000000000000000000000000000000000030
+:10409000000000000000000005DC05E305E305E783
+:1040A00005E705EB00000000000000000000000034
+:1040B0000000000000000000000000000000000000
+:1040C0000000000005EB062B062B06330633063BEB
+:1040D00000000000000000000000000000000000E0
+:1040E00000000000000000000000000000000000D0
+:1040F000063B068806880695069506A20000000085
+:1041000000000000000000000000000000000000AF
+:1041100000000000000000000000000006A206AE43
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:10414000000000000000000006AE06B40000000001
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:104170000000000006B406B70000000000000000C8
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A00006B706BD0000000000000000000000008F
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000006BD06BE68
+:1041D00006BE06D006D006E2000000000000000087
+:1041E00000000000000000000000000000000000CF
+:1041F000000000000000000006E2074F0000000081
+:1042000000000000000000000000000000000000AE
+:10421000000000000000000000000000000000009E
+:1042200000000000074F0750075007630763077639
+:10423000000000000000000000000000000000007E
+:10424000000000000000000000000000000000006E
+:10425000000000000000000000000000000000005E
+:10426000000000000000000000000000000000004E
+:10427000000000000000000000000000000000003E
+:10428000000000000000000000000000000000002E
+:10429000000000000000000000000000000000001E
+:1042A000000000000000000000000000000000000E
+:1042B00000000000000000000000000000000000FE
+:1042C00000000000000000000000000000000000EE
+:1042D00000000000000000000000000000000000DE
+:1042E00000000000000000000000000000000000CE
+:1042F00000000000000000000000000000000000BE
+:1043000000000000000000000000000000000000AD
+:10431000000000000000000000000000000000009D
+:10432000000000000000000000000000000000008D
+:1043300000010000000204C00003098000040E40D8
+:1043400000051300000617C000071C80000821406C
+:1043500000092600000A2AC0000B2F80000C344000
+:10436000000D3900000E3DC0000F42800010474094
+:1043700000114C00001250C00013558000145A4028
+:1043800000155F00001663C00017688000186D40BC
+:1043900000197200001A76C0001B7B80001C804050
+:1043A000001D8500001E89C0001F8E800000934004
+:1043B00000002000000040000000600000008000BD
+:1043C0000000A0000000C0000000E00000010000AC
+:1043D0000001200000014000000160000001800099
+:1043E0000001A0000001C0000001E0000002000088
+:1043F0000002200000024000000260000002800075
+:104400000002A0000002C0000002E0000003000063
+:104410000003200000034000000360000003800050
+:104420000003A0000003C0000003E000000400003F
+:10443000000420000004400000046000000480002C
+:104440000004A0000004C0000004E000000500001B
+:104450000005200000054000000560000005800008
+:104460000005A0000005C0000005E00000060000F7
+:1044700000062000000640000006600000068000E4
+:104480000006A0000006C0000006E00000070000D3
+:1044900000072000000740000007600000078000C0
+:1044A0000007A0000007C0000007E00000080000AF
+:1044B000000820000008400000086000000880009C
+:1044C0000008A0000008C0000008E000000900008B
+:1044D0000009200000094000000960000009800078
+:1044E0000009A0000009C0000009E000000A000067
+:1044F000000A2000000A4000000A6000000A800054
+:10450000000AA000000AC000000AE000000B000042
+:10451000000B2000000B4000000B6000000B80002F
+:10452000000BA000000BC000000BE000000C00001E
+:10453000000C2000000C4000000C6000000C80000B
+:10454000000CA000000CC000000CE000000D0000FA
+:10455000000D2000000D4000000D6000000D8000E7
+:10456000000DA000000DC000000DE000000E0000D6
+:10457000000E2000000E4000000E6000000E8000C3
+:10458000000EA000000EC000000EE000000F0000B2
+:10459000000F2000000F4000000F6000000F80009F
+:1045A000000FA000000FC000000FE000001000008E
+:1045B000001020000010400000106000001080007B
+:1045C0000010A0000010C0000010E000001100006A
+:1045D0000011200000114000001160000011800057
+:1045E0000011A0000011C0000011E0000012000046
+:1045F0000012200000124000001260000012800033
+:104600000012A0000012C0000012E0000013000021
+:10461000001320000013400000136000001380000E
+:104620000013A0000013C0000013E00000140000FD
+:1046300000142000001440000014600000148000EA
+:104640000014A0000014C0000014E00000150000D9
+:1046500000152000001540000015600000158000C6
+:104660000015A0000015C0000015E00000160000B5
+:1046700000162000001640000016600000168000A2
+:104680000016A0000016C0000016E0000017000091
+:10469000001720000017400000176000001780007E
+:1046A0000017A0000017C0000017E000001800006D
+:1046B000001820000018400000186000001880005A
+:1046C0000018A0000018C0000018E0000019000049
+:1046D0000019200000194000001960000019800036
+:1046E0000019A0000019C0000019E000001A000025
+:1046F000001A2000001A4000001A6000001A800012
+:10470000001AA000001AC000001AE000001B000000
+:10471000001B2000001B4000001B6000001B8000ED
+:10472000001BA000001BC000001BE000001C0000DC
+:10473000001C2000001C4000001C6000001C8000C9
+:10474000001CA000001CC000001CE000001D0000B8
+:10475000001D2000001D4000001D6000001D8000A5
+:10476000001DA000001DC000001DE000001E000094
+:10477000001E2000001E4000001E6000001E800081
+:10478000001EA000001EC000001EE000001F000070
+:10479000001F2000001F4000001F6000001F80005D
+:1047A000001FA000001FC000001FE000002000004C
+:1047B0000020200000204000002060000020800039
+:1047C0000020A0000020C0000020E0000021000028
+:1047D0000021200000214000002160000021800015
+:1047E0000021A0000021C0000021E0000022000004
+:1047F00000222000002240000022600000228000F1
+:104800000022A0000022C0000022E00000230000DF
+:1048100000232000002340000023600000238000CC
+:104820000023A0000023C0000023E00000240000BB
+:1048300000242000002440000024600000248000A8
+:104840000024A0000024C0000024E0000025000097
+:104850000025200000254000002560000025800084
+:104860000025A0000025C0000025E0000026000073
+:104870000026200000264000002660000026800060
+:104880000026A0000026C0000026E000002700004F
+:10489000002720000027400000276000002780003C
+:1048A0000027A0000027C0000027E000002800002B
+:1048B0000028200000284000002860000028800018
+:1048C0000028A0000028C0000028E0000029000007
+:1048D00000292000002940000029600000298000F4
+:1048E0000029A0000029C0000029E000002A0000E3
+:1048F000002A2000002A4000002A6000002A8000D0
+:10490000002AA000002AC000002AE000002B0000BE
+:10491000002B2000002B4000002B6000002B8000AB
+:10492000002BA000002BC000002BE000002C00009A
+:10493000002C2000002C4000002C6000002C800087
+:10494000002CA000002CC000002CE000002D000076
+:10495000002D2000002D4000002D6000002D800063
+:10496000002DA000002DC000002DE000002E000052
+:10497000002E2000002E4000002E6000002E80003F
+:10498000002EA000002EC000002EE000002F00002E
+:10499000002F2000002F4000002F6000002F80001B
+:1049A000002FA000002FC000002FE000003000000A
+:1049B00000302000003040000030600000308000F7
+:1049C0000030A0000030C0000030E00000310000E6
+:1049D00000312000003140000031600000318000D3
+:1049E0000031A0000031C0000031E00000320000C2
+:1049F00000322000003240000032600000328000AF
+:104A00000032A0000032C0000032E000003300009D
+:104A1000003320000033400000336000003380008A
+:104A20000033A0000033C0000033E0000034000079
+:104A30000034200000344000003460000034800066
+:104A40000034A0000034C0000034E0000035000055
+:104A50000035200000354000003560000035800042
+:104A60000035A0000035C0000035E0000036000031
+:104A7000003620000036400000366000003680001E
+:104A80000036A0000036C0000036E000003700000D
+:104A900000372000003740000037600000378000FA
+:104AA0000037A0000037C0000037E00000380000E9
+:104AB00000382000003840000038600000388000D6
+:104AC0000038A0000038C0000038E00000390000C5
+:104AD00000392000003940000039600000398000B2
+:104AE0000039A0000039C0000039E000003A0000A1
+:104AF000003A2000003A4000003A6000003A80008E
+:104B0000003AA000003AC000003AE000003B00007C
+:104B1000003B2000003B4000003B6000003B800069
+:104B2000003BA000003BC000003BE000003C000058
+:104B3000003C2000003C4000003C6000003C800045
+:104B4000003CA000003CC000003CE000003D000034
+:104B5000003D2000003D4000003D6000003D800021
+:104B6000003DA000003DC000003DE000003E000010
+:104B7000003E2000003E4000003E6000003E8000FD
+:104B8000003EA000003EC000003EE000003F0000EC
+:104B9000003F2000003F4000003F6000003F8000D9
+:104BA000003FA000003FC000003FE000003FE001E8
+:104BB00000000000000001FF0000020000007FF87C
+:104BC00000007FF80000016A0000150000000001ED
+:104BD0000000FF00000000000000FF0000000000D7
+:104BE00000000000140AFF000000000100000000A7
+:104BF00000201001000000000100860000000100FC
+:104C00000000860200008604000086060000860878
+:104C10000000860A0000860C0000860E0000861048
+:104C20000000861200008614000086160000861818
+:104C30000000861A0000861C0000861E00008620E8
+:104C400000008622000086240000862600008628B8
+:104C50000000862A0000862C0000862E0000863088
+:104C60000000863200008634000086360000863858
+:104C70000000863A0000863C0000863E0000864028
+:104C800000008642000086440000864600008648F8
+:104C90000000864A0000864C0000864E00008650C8
+:104CA0000000865200008654000086560000865898
+:104CB0000000865A0000865C0000865E0000866068
+:104CC0000000866200008664000086660000866838
+:104CD0000000866A0000866C0000866E0000867008
+:104CE00000008672000086740000867600008678D8
+:104CF0000000867A0000867C0000867E00008680A8
+:104D00000000868200008684000086860000868877
+:104D10000000868A0000868C0000868E0000869047
+:104D20000000869200008694000086960000869817
+:104D30000000869A0000869C0000869E000086A0E7
+:104D4000000086A2000086A4000086A6000086A8B7
+:104D5000000086AA000086AC000086AE000086B087
+:104D6000000086B2000086B4000086B6000086B857
+:104D7000000086BA000086BC000086BE000086C027
+:104D8000000086C2000086C4000086C6000086C8F7
+:104D9000000086CA000086CC000086CE000086D0C7
+:104DA000000086D2000086D4000086D6000086D897
+:104DB000000086DA000086DC000086DE000086E067
+:104DC000000086E2000086E4000086E6000086E837
+:104DD000000086EA000086EC000086EE000086F007
+:104DE000000086F2000086F4000086F6000086F8D7
+:104DF000000086FA000086FC000086FE00008700A6
+:104E00000000870200008704000087060000870872
+:104E10000000870A0000870C0000870E0000871042
+:104E20000000871200008714000087160000871812
+:104E30000000871A0000871C0000871E00008720E2
+:104E400000008722000087240000872600008728B2
+:104E50000000872A0000872C0000872E0000873082
+:104E60000000873200008734000087360000873852
+:104E70000000873A0000873C0000873E0000874022
+:104E800000008742000087440000874600008748F2
+:104E90000000874A0000874C0000874E00008750C2
+:104EA0000000875200008754000087560000875892
+:104EB0000000875A0000875C0000875E0000876062
+:104EC0000000876200008764000087660000876832
+:104ED0000000876A0000876C0000876E0000877002
+:104EE00000008772000087740000877600008778D2
+:104EF0000000877A0000877C0000877E00008780A2
+:104F00000000878200008784000087860000878871
+:104F10000000878A0000878C0000878E0000879041
+:104F20000000879200008794000087960000879811
+:104F30000000879A0000879C0000879E000087A0E1
+:104F4000000087A2000087A4000087A6000087A8B1
+:104F5000000087AA000087AC000087AE000087B081
+:104F6000000087B2000087B4000087B6000087B851
+:104F7000000087BA000087BC000087BE000087C021
+:104F8000000087C2000087C4000087C6000087C8F1
+:104F9000000087CA000087CC000087CE000087D0C1
+:104FA000000087D2000087D4000087D6000087D891
+:104FB000000087DA000087DC000087DE000087E061
+:104FC000000087E2000087E4000087E6000087E831
+:104FD000000087EA000087EC000087EE000087F001
+:104FE000000087F2000087F4000087F6000087F8D1
+:104FF000000087FA000087FC000087FEFFFFFFFF2C
+:10500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
+:10501000FFFFFFFFFFFFFFFFFFFFFFFF0000000399
+:1050200000BEBC20000000000000000500000003DE
+:1050300000BEBC20000000000000000500002000B1
+:10504000000040C000006180000082400000A3001A
+:105050000000C3C00000E4800001054000012600FC
+:10506000000146C000016780000188400001A900DE
+:105070000001C9C00001EA8000020B4000022C00C0
+:1050800000024CC000026D8000028E400002AF00A2
+:105090000002CFC00002F08000001140000080003C
+:1050A000000103800001870000020A8000028E00D8
+:1050B00000031180000395000004188000049C0088
+:1050C00000051F800005A300000626800006AA0038
+:1050D00000072D800007B100000834800008B800E8
+:1050E00000093B800009BF00000A4280000AC60098
+:1050F000000B4980000BCD00000C5080000CD40048
+:10510000000D578000005B0000007FF800007FF872
+:1051100000000166000015000000FF000000000014
+:105120000000FF0000000000000019000000000067
+:1051300000000000FFFFFFFF00007FF800007FF885
+:1051400000000361000015000000FF000FFFFFFFDB
+:105150000000FF000FFFFFFF000000FF0000FF0046
+:105160000FFFFFFF0000FF000FFFFFFF000000FF29
+:105170000000FF000FFFFFFF0000FF000FFFFFFF19
+:10518000000000FF0000FF000FFFFFFF0000FF0016
+:105190000FFFFFFF000000FF0000FF000FFFFFFFF9
+:1051A0000000FF000FFFFFFF000000FF0000FF00F6
+:1051B0000FFFFFFF0000FF000FFFFFFF000000FFD9
+:1051C0000000FF000FFFFFFF0000FF000FFFFFFFC9
+:1051D000000000FF0000FF000FFFFFFF0000FF00C6
+:1051E0000FFFFFFF000000FF0000FF000FFFFFFFA9
+:1051F0000000FF000FFFFFFF000000FF0000FF00A6
+:105200000FFFFFFF0000FF000FFFFFFF000000FF88
+:105210000000FF000FFFFFFF0000FF000FFFFFFF78
+:10522000000000FF0000FF000FFFFFFF0000FF0075
+:105230000FFFFFFF000000FF0000FF000FFFFFFF58
+:105240000000FF000FFFFFFF000000FF0000FF0055
+:105250000FFFFFFF0000FF000FFFFFFF000000FF38
+:105260000000FF000FFFFFFF0000FF000FFFFFFF28
+:10527000000000FF0000FF000FFFFFFF0000FF0025
+:105280000FFFFFFF000000FF0000FF000FFFFFFF08
+:105290000000FF000FFFFFFF000000FF0000FF0005
+:1052A0000FFFFFFF0000FF000FFFFFFF000000FFE8
+:1052B0000000FF000FFFFFFF0000FF000FFFFFFFD8
+:1052C000000000FF0000FF000FFFFFFF0000FF00D5
+:1052D0000FFFFFFF000000FF0000FF000FFFFFFFB8
+:1052E0000000FF000FFFFFFF000000FF0000FF00B5
+:1052F0000FFFFFFF0000FF000FFFFFFF000000FF98
+:105300000000FF000FFFFFFF0000FF000FFFFFFF87
+:10531000000000FF0000FF000FFFFFFF0000FF0084
+:105320000FFFFFFF000000FF0000FF000FFFFFFF67
+:105330000000FF000FFFFFFF000000FF0000FF0064
+:105340000FFFFFFF0000FF000FFFFFFF000000FF47
+:105350000000FF000FFFFFFF0000FF000FFFFFFF37
+:10536000000000FF0000FF000FFFFFFF0000FF0034
+:105370000FFFFFFF000000FF0000FF000FFFFFFF17
+:105380000000FF000FFFFFFF000000FF0000FF0014
+:105390000FFFFFFF0000FF000FFFFFFF000000FFF7
+:1053A0000000FF000FFFFFFF0000FF000FFFFFFFE7
+:1053B000000000FF0000FF000FFFFFFF0000FF00E4
+:1053C0000FFFFFFF000000FF000000FF000000FFD4
+:1053D0000000FF00000000000000FF0000000000CF
+:1053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:1053F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:1054000000001000000020800000310000004180FA
+:1054100000005200000062800000730000008380E2
+:10542000000094000000A4800000B5000000C580CA
+:105430000000D6000000E6800000F70000010780B1
+:105440000001180000012880000139000001498096
+:1054500000015A0000016A8000017B0000018B807E
+:1054600000019C000001AC800001BD000001CD8066
+:105470000001DE000001EE8000000F0000000000CF
+:1054800000007FF800007FF80000021D00001500FA
+:1054900010000000000028AD00010001FFFFFFFF29
+:1054A000FFFFFFFF00090206CCCCCCC17058103CB6
+:1054B000000000000000FF00000000000000FF00EE
+:1054C000000000000000000000000001CCCC020140
+:1054D000CCCCCCCCCCCC0201CCCCCCCC00000000D1
+:1054E000FFFFFFFF0000FFFF000000000000FFFFC4
+:1054F000000000000000FFFF000000000000FFFFB0
+:10550000000000000000FFFF000000000000FFFF9F
+:10551000000000000000FFFF000000000000FFFF8F
+:1055200000000000000E0000011600D60000FFFF82
+:10553000000000000000FFFF000000000000FFFF6F
+:10554000000000000000FFFF000000000000FFFF5F
+:10555000000000000000FFFF000000000000FFFF4F
+:10556000000000000000FFFF0000000000720000CB
+:10557000012300F3FFFFFFF3318FFFFF0C30C30C5B
+:10558000C30C30C3CF3CF300F3CF3CF30000CF3C5F
+:10559000CDCDCDCDFFFFFFF130EFFFFF0C30C30CC1
+:1055A000C30C30C3CF3CF300F3CF3CF30001CF3C3E
+:1055B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2C
+:1055C000C30C30C3CF3CF300F3CF3CF30002CF3C1D
+:1055D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C2
+:1055E000C30C30C3CF300014F3CF3CF30004CF3CE6
+:1055F000CDCDCDCDFFFFFFF2304FFFFF0C30C30C00
+:10560000C30C30C3CF3CF300F3CF3CF30008CF3CD6
+:10561000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF7
+:10562000C30C30C3CF3CF300F3CF3CF30010CF3CAE
+:10563000CDCDCDCDFFFFFFF731EFFFFF0C30C30C19
+:10564000C30C30C3CF3CF300F3CF3CF30020CF3C7E
+:10565000CDCDCDCDFFFFFFF5302FFFFF0C30C30CBC
+:10566000C30C30C3CF3CF300F3CF3CF30040CF3C3E
+:10567000CDCDCDCDFFFFFFF3318FFFFF0C30C30C3D
+:10568000C30C30C3CF3CF300F3CF3CF30000CF3C5E
+:10569000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9F
+:1056A000C30C30C3CF3CF300F3CF3CF30001CF3C3D
+:1056B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2B
+:1056C000C30C30C3CF3CF300F3CF3CF30002CF3C1C
+:1056D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C1
+:1056E000C30C30C3CF300014F3CF3CF30004CF3CE5
+:1056F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFF
+:10570000C30C30C3CF3CF300F3CF3CF30008CF3CD5
+:10571000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF6
+:10572000C30C30C3CF3CF300F3CF3CF30010CF3CAD
+:10573000CDCDCDCDFFFFFFF730EFFFFF0C30C30C19
+:10574000C30C30C3CF3CF300F3CF3CF30020CF3C7D
+:10575000CDCDCDCDFFFFFFF5304FFFFF0C30C30C9B
+:10576000C30C30C3CF3CF300F3CF3CF30040CF3C3D
+:10577000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CF1
+:10578000C30C30C3CF3CF3CCF3CF3CF30000CF3C91
+:10579000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CD1
+:1057A000C30C30C3CF3CF3CCF3CF3CF30001CF3C70
+:1057B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CB1
+:1057C000C30C30C3CF3CF3CCF3CF3CF30002CF3C4F
+:1057D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C91
+:1057E000C30C30C3CF3CF3CCF3CF3CF30004CF3C2D
+:1057F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C71
+:10580000C30C30C3CF3CF3CCF3CF3CF30008CF3C08
+:10581000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C50
+:10582000C30C30C3CF3CF3CCF3CF3CF30010CF3CE0
+:10583000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C30
+:10584000C30C30C3CF3CF3CCF3CF3CF30020CF3CB0
+:10585000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C10
+:10586000C30C30C3CF3CF3CCF3CF3CF30040CF3C70
+:10587000CDCDCDCDFFFFFFF3320FFFFF0C30C30CBA
+:10588000C30C30C3CF3CF300F3CF3CF30000CF3C5C
+:10589000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9D
+:1058A000C30C30C3CF3CF300F3CF3CF30001CF3C3B
+:1058B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C29
+:1058C000C30C30C3CF3CF300F3CF3CF30002CF3C1A
+:1058D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BF
+:1058E000C30C30C3CF300014F3CF3CF30004CF3CE3
+:1058F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFD
+:10590000C30C30C3CF3CF300F3CF3CF30008CF3CD3
+:10591000CDCDCDCDFFFFFF8A042FFFFF0C30C30C90
+:10592000C30C30C3CF3CC000F3CF3CF30010CF3CDE
+:10593000CDCDCDCDFFFFFF9705CFFFFF0C30C30CC2
+:10594000C30C30C3CF3CC000F3CF3CF30020CF3CAE
+:10595000CDCDCDCDFFFFFFF5310FFFFF0C30C30CD8
+:10596000C30C30C3CF3CF300F3CF3CF30040CF3C3B
+:10597000CDCDCDCDFFFFFFF3300FFFFF0C30C30CBB
+:10598000C30C30C3CF3CF300F3CF3CF30000CF3C5B
+:10599000CDCDCDCDFFFFFFF1300FFFFF0C30C30C9D
+:1059A000C30C30C3CF3CF300F3CF3CF30001CF3C3A
+:1059B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C28
+:1059C000C30C30C3CF3CF300F3CF3CF30002CF3C19
+:1059D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BE
+:1059E000C30C30C3CF300014F3CF3CF30004CF3CE2
+:1059F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFC
+:105A0000C30C30C3CF3CF300F3CF3CF30008CF3CD2
+:105A1000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF3
+:105A2000C30C30C3CF3CF300F3CF3CF30010CF3CAA
+:105A3000CDCDCDCDFFFFFF97040FFFFF0C30C30C82
+:105A4000C30C30C3CF3CC000F3CF3CF30020CF3CAD
+:105A5000CDCDCDCDFFFFFFF5300FFFFF0C30C30CD8
+:105A6000C30C30C3CF3CF300F3CF3CF30040CF3C3A
+:105A7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEE
+:105A8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8E
+:105A9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCE
+:105AA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6D
+:105AB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAE
+:105AC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4C
+:105AD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8E
+:105AE000C30C30C3CF3CF3CCF3CF3CF30004CF3C2A
+:105AF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6E
+:105B0000C30C30C3CF3CF3CCF3CF3CF30008CF3C05
+:105B1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4D
+:105B2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDD
+:105B3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2D
+:105B4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAD
+:105B5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0D
+:105B6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6D
+:105B7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CED
+:105B8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8D
+:105B9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCD
+:105BA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6C
+:105BB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAD
+:105BC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4B
+:105BD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8D
+:105BE000C30C30C3CF3CF3CCF3CF3CF30004CF3C29
+:105BF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6D
+:105C0000C30C30C3CF3CF3CCF3CF3CF30008CF3C04
+:105C1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4C
+:105C2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDC
+:105C3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2C
+:105C4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAC
+:105C5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0C
+:105C6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6C
+:105C7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEC
+:105C8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8C
+:105C9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCC
+:105CA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6B
+:105CB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAC
+:105CC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4A
+:105CD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8C
+:105CE000C30C30C3CF3CF3CCF3CF3CF30004CF3C28
+:105CF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6C
+:105D0000C30C30C3CF3CF3CCF3CF3CF30008CF3C03
+:105D1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4B
+:105D2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDB
+:105D3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2B
+:105D4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAB
+:105D5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0B
+:105D6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6B
+:105D7000CDCDCDCD000C0000000700C00002813069
+:105D8000000B81580002021000010230000F024097
+:105D900000010330000C0000000800C00002814038
+:105DA000000B81680002022000010240000702503F
+:105DB000000202C000100000000801000002818003
+:105DC000000B81A80002026000018280000E829810
+:105DD0000008038000028000000B8028000200E021
+:105DE000000101000000811000000118CCCCCCCCD7
+:105DF000CCCCCCCCCCCCCCCCCCCCCCCC00002000F3
+:105E0000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCD2
+:105E100000002000CCCCCCCCCCCCCCCCCCCCCCCCD2
+:105E2000CCCCCCCC00002000000000000000000022
+:105E30001F8B080000000000000BFB51CFC0F003D7
+:105E40008ABB5819180238107C7AE0A58C94E9DFD7
+:105E5000C8CCC0B00388AF02F17E66D2F5B34A2346
+:105E6000D8F7241818182419184E893130EC9244A8
+:105E700088E702D5084A3130DC858A0500D967A554
+:105E8000E81B4EA39836F8BB3A2AFF912A84CE87A6
+:105E900089A3C93F86CA6F5480D03FD5B19BBB0947
+:105EA0002A0F00FE694F6760030000000000000039
+:105EB0001F8B080000000000000BED7D0B7854D50F
+:105EC000B9E8DACFD933994C7642422610700703ED
+:105ED000040D30208FA85427E1D1E0E5E8F0462EEC
+:105EE000CA80AF0892448D356D39373B6412020287
+:105EF0008ECAA1B4A53A207AA247DBD4464B7BF5E3
+:105F0000DC206A73DAD37B9152A52DB6413D281669
+:105F100068F49403BDD796BBFE7FAD3DD97B672661
+:105F20000F5FDF395F1B3EDD597BAFBDD6BFFEF78C
+:105F3000FAFF7FEDA8A297A8971072117EAE256494
+:105F40009D4008C9EBBD5AF78916AD26B9845405A2
+:105F500055632B7DB65E0A1B8DD3E8FD4BC4D01371
+:105F600004EE8F9B432611A2C07B05844C85FF4D18
+:105F70002744CE691D1EF5D37BD2AA2CB85AE3590B
+:105F8000D72A99107D2A3CDF362ED5F3E4FC09A5EB
+:105F9000A75B23F873710C21F5C76F9CFF8AD5A608
+:105FA000FF8D2499B9272FA7BFCC24332F4A847C97
+:105FB00054B828ABD3483FDE070D5DBA3C9690F34A
+:105FC0000D2BE6BF32B6EFF3F512A96D2FED7BFF77
+:105FD0002AA2215E8866AA9189BDEB5E4F48A72759
+:105FE0008790CD859BD87A7329B2AEA4F7DBFE45A6
+:105FF000974B7AE15C2FD37E53FBAE871013C7B566
+:10600000C649BE9FE872BCEF7E2F391E7F9FC8F441
+:10601000DF0C42B00B5DFF74217A2DDCF7142E32B9
+:1060200047D0F6FA67CA49B4343DFC497A7D42F854
+:10603000ADF7D2D291F7FB687F530BA1EF9D54E3EC
+:10604000D75F45F9E8BDEF4BA14DC0477BC6CF21D7
+:10605000017A9F303EB2E8746A7FD3F054FC918E8F
+:106060004E7F4FBCC87F167F5589ABB23AC927E730
+:10607000AF3B80BF326CFCD5BEB8DFF13E297FC597
+:10608000DCFCC5F171BA9DAD9FEC1EC6E8C2E9E526
+:10609000A64F5ABA7CD2F7FAF2D316C0ABA77DB19D
+:1060A0003982A4E0270EAF45AF4F0BEF407C444848
+:1060B0001CE94C484482F97BEFB36B469921009F61
+:1060C000D1E6615847904D4582B7B6DC2D52380372
+:1060D00024D13AAE88B6BBD72C00B803C7E79F02DD
+:1060E00079680E5568B3E97AF569C643F3E835A3D4
+:1060F0005417603D5B89084A808E576D969702BDA4
+:1061000008B69F366F099B80071226643821F7F185
+:106110003511221A326DABF0EB9854EB504927C37E
+:106120008770D1D3F7FD74EB577BDF23178BE0FF2C
+:10613000F71058DF40EF91287BCFA4FF00DF39AE86
+:1061400071F439B46DE3FB00B1B5E9F3A3F00BE2F0
+:10615000FBEE2F64BE6CB24F33A87E504B443D0122
+:10616000FD89912DD37646255544F03C480E528A40
+:106170000C489766422ADB811F493B5938B117BE4C
+:106180005344C0F514DCBE734D0B555DE7CAFC21CA
+:10619000E0F3A04EC8B09CBEEBD9D6401979BCAD97
+:1061A0001D7A0EF93F46F9680C7DDF0C317BB8B5DE
+:1061B000E4653D6A93EF0C41E07CE9E60F62C83389
+:1061C00040CC8055E8B5440C7B039F9E3F64171E6E
+:1061D00007CB1FFEA88D3E64E8F40A72BF61B0FCD5
+:1061E000F169E7B3E8DA57AE1A2DBA6A84D2614B87
+:1061F000F1A294FE477ABAEE23D03FA384841329F8
+:10620000DE1B25085C0E4C87BEC12BA58F9424EFA6
+:10621000BD0E7A49F93356ECED071F52AE131FD667
+:10622000B8DE7AC97897AA4422EB228CA7C2789468
+:106230004FB7041F3609958773C0DB141F527C4A81
+:1062400027B44931413EA43F9D026D7B83E1C45692
+:10625000E48304D2C582CF63880EFCCAB93E479B53
+:10626000AC30053BFCDE7A15E150D147A0E3E87481
+:10627000408A0AD94F3A816F2D7E0536B87829B405
+:10628000BFEEE08356632A4945078B5F01AD8C5F03
+:10629000BF3E38FDE29E6F8913DE41BFE7978D93C5
+:1062A000363B94FE3D999CB4E84391580503D8F8D9
+:1062B00060B3420E089309692A5C46A2F4EE667840
+:1062C00044ED580B5C0BC03F9C8A7A81B40932C004
+:1062D00069D95512CCC17ED30503C713B55AD42B47
+:1062E000923FCCEC2B7F9E1E2E36FF70231ED629AC
+:1062F0007EF3493C2C52FA505D19EA24A037C304BE
+:10630000F88084185F48DC4FB7DE8F717EF692A369
+:10631000F83ED5AEA68EF6CC29C77325FA908EB37B
+:10632000A584243C48A7B8066DB94426B02FA0FA2E
+:10633000C95F40FB6759EC2F2D0801FC59DCBE9268
+:10634000599CBF05AACF289EFDD39CF2ED73C9BF0F
+:10635000CCED711F7D96663F615DDDFEDB6302F76C
+:10636000DF32881FE9CDDF27FED4FEAAE5B75978D2
+:10637000CD1309E293FC54493C51C4D746DBF7BC2A
+:10638000959D80759B159135CD140FE6DB42A809CC
+:10639000E829877BB2E8F3934F4AB85FCA5B567F20
+:1063A00009CCB7BDC11C5B6CF307B7CBB51AE09B3A
+:1063B000F28566B7173790E80B826DFFE509B68C5A
+:1063C0002D1E86FCF7767709980A01F9CFEB8F0529
+:1063D0005F05B9E4F793F8B1B7A5BEEDDC7CC2ED7B
+:1063E000E50DE5613A6F2BE8AE11F8D814283CAD05
+:1063F00005ACFD93C6E1E5603F5B3359FBA3C6776F
+:10640000C28DC817512D42EFD5138E972E8A17A42F
+:10641000BF916FB7AFEEAB7BFD3B64DD077CB6D7BA
+:106420009F735D09D8CF32310468DF1B3BA2AFB147
+:10643000E1E39B9E8A37001F2349422040BF582E2C
+:10644000CA8FE5CF01E341BB80CB5321398CFD4698
+:10645000477ACA15B8B5427F19AE2DC1E7B2519E31
+:10646000C81CFD24CABF245CBC7CF0F29E6EBD013A
+:10647000814452F9F3F74B392857816974DD0EBD19
+:106480005EA8233FF271BF063402FD914D619A0C64
+:106490007A24BE229262BC9F0822F6D3C01E5C41C1
+:1064A000D150B8ACECDFE87A352D3CE5550A97279A
+:1064B000D71F32116C66270C2E039E78A306F82591
+:1064C000472502F2AF158623B7019F924858A0F7DF
+:1064D000B56038B4D5E8BB3E9530FB9043AF179913
+:1064E0007C13E87F4F9E8EFD09D80B6B5D63002EF9
+:1064F00015E1FA0CE89D2B4E1F98CE23487B3918E6
+:10650000B374F4FEACE99CEE7D377D030293AFFBE0
+:106510009BCE874D2A4F2DC7055102A5182F46BA8D
+:10652000689C2EE795A8067EE396AF8A641F6D3FB0
+:106530005ADFBF9F12033FC563B39B3AA3DFC8BBBB
+:10654000F4A9C042E9DEDB7597589948C14F9522FE
+:10655000D3FB5BEE7A383E16E8F98A73BFA7AC0A24
+:10656000A35F4AF77D95400FEB3D6F31B34F643F1A
+:106570005D0FEDAF707FE47CDEA22C92621EEBBA61
+:10658000C7057F21C5732AB9B94FE2FED54E36BE85
+:10659000E5EF9C2FE87F7C0B3F172A4572B814C9A2
+:1065A000EA23A57C3114EF8549BF3B0FDB1EFE2893
+:1065B000512BFA08D8BDC2CE72B82AA4A711F8741C
+:1065C0009748AA52C1B7561211BEC230DD7A50BDEB
+:1065D0005F688AA099C8BD9281F7F357D51E5428E9
+:1065E0005D5A47911098994B603CD0AB07BD683F0E
+:1065F000D55C92F0523DFD5AD1574CB0CB7A21096F
+:10660000032C7A2DEC39E97FD4BE1AF4B9B2316A81
+:10661000225CC108EE110E152D437AB750FFCEC390
+:1066200016E2E0A71653EC04BE8DD3F1C11F8C1BFC
+:106630001528AFE782D4F2C3CFC7147E6BBF712990
+:10664000C485282901CE0932C2494762F4D4195EB3
+:1066500046EE9E453AA9DD69CDDE85F2605E495081
+:106660005E6572D814C0CEC80953A4F0C6AA983E7D
+:106670005072E382DD8EED21D107ED7C23EB9DE8A6
+:10668000FFB5FE595A910AAFD522D36FF7717D78C5
+:106690005E699F8FFE4633958FA2BEFDC39C0EDFC1
+:1066A0008E2D7A703CEA336697ACE75D82E18863B1
+:1066B0008EBCA0E27ADC7ECD3CEED7B41452BF068D
+:1066C000E59D2C003F2683F3470B608F3EF76493D4
+:1066D0008449E1C8007F86FA25A494F9251AFD07AC
+:1066E000FA2F7F85D39FF1B8FC9674FECCD784C86F
+:1066F0000F50DF515505F0EF16E2F3C701BE0BE86E
+:106700007ED2E8BBEE2EBE9F9C2B6D2B6AA1703D06
+:10671000962B3AF861349797C78879E2227D1E2F2D
+:10672000140D803B5E2FE23ACE19CC6F27EF7A1D15
+:1067300076A2D95CA4119BFED9C1E5695B83E69082
+:106740005BF7D5AFC6A391147A4BE7F4C99815C689
+:10675000F8873F9440FAC33A53F9E90F945668FD1D
+:10676000E93FB9445D83F82BAC3825C3B5CCBD5F98
+:106770004A3DAEFB4AEC7EA694BEDF60AF5B289E2E
+:10678000DE561CFE78A704FB2E93A0FFE70D5153A5
+:106790001580AB3E1CE0F786A8B8C1B5BBBC12EEB5
+:1067A0001BB3221AC891659FBDA1C856B89FF52595
+:1067B000790BD0CB5B2E8A12A59F269B24C7263748
+:1067C00053E1A68DBF33A9BAB4E3438B7EA512FC77
+:1067D00054522892B1148ECD1F3768763A75D16D18
+:1067E00008DBB73AF9265EDFBF9EFDB47CF173D1BA
+:1067F0008A8738E9853FF67808A77392FE7DE21A0A
+:10680000FF39E8AD71FA19947E9B0CA027D3177459
+:10681000E385FE435C33C3D08E1B8668DAF4D8C7A9
+:10682000620EE241BE20A35EDABDA6250CF4D2E9D9
+:1068300018405A7A0DA7B2DB5D828A7245F5C655BB
+:10684000D27454C802C43FE74A1B91DE8F517A8349
+:106850001E7B8CD4765DCCED957F2DAAA21FDFD553
+:10686000689637160F456F52F8A85F47F630FFE578
+:1068700012CB7FF97BCA2783F057CE53A3C1EDB16A
+:1068800017F84AEEA62C4DE12ADCC8EC26F86A3946
+:10689000B46D50BBD729F4F2A387CFA394260E8FF3
+:1068A000477A3BEDD363852F0B1EB06FC5CCBEA9D5
+:1068B000666718F44CA098DA2782F66735E06744DB
+:1068C00049BC1CDA2377CFC3757C1BFC503FD8171B
+:1068D00082F8F8A698683429CD7CE148A728C1FE43
+:1068E00099E0FECEA29F7B5E6AF5909EBE6C712FF2
+:1068F000D029507B189669B77BD5525EAF3D1C51AD
+:10690000D289EAD6ED2FA4F513FE2CF1FDD8CCC622
+:10691000306D8F825FA93FB9537CBC11F663114F74
+:10692000B81EE9EEDA4724E3503CDEBDB6CC122AAD
+:1069300063F96FE83C7776291400027E80648F0348
+:10694000DD097689EA9BB5DCAEDD4A2201787886DE
+:1069500088185F3B438E04AEB0F1E14E4965F3B455
+:106960002A6F43FCDE8AEFDE16676D4BFFDCB1DB7E
+:10697000D9BE9D2C1A0EF1DBDB772AB8FE3B5DFBFE
+:10698000D698A4E3B87790DA16C043B342D04F58F4
+:10699000AB1319E2B11B7EF89D19B04FF836B72B37
+:1069A0001F50FE326CFA679D3FA1C27EF69D8E2B72
+:1069B000965D4DE0FD44CB08D89767939476F496A6
+:1069C00056277C03C1EF8697904DFDC221B7092958
+:1069D000E3874F4982236E58AF052641D0E4BC9728
+:1069E0005DCD0AA63FCCDF7A134DE0274A06EF5F64
+:1069F0003B99E5396A67C275A0F77EC6FDD1A1BE95
+:106A00007738CD7B1BB46E15F8BF46362B05B137F2
+:106A10005EA529B5E19120C707CA3B471247BFD6FB
+:106A200041F6AB14FBE9E786F794AE99E2E4BE7059
+:106A3000DF40A26F81DC9D17A3D51827E0707B0093
+:106A4000CF125C65A427C64F8A605E7FAB9005714C
+:106A5000940EF44FBC86ECA0778DA507A85E82B893
+:106A60004F4689F3B93BAED293A46B27CA1786442D
+:106A7000E992029ABF53027FB14C3E9DEC4FE7ABC7
+:106A800086754DC64EA85FEAB87EA926C683B3A612
+:106A9000A17C61BCAE6EFE1813E0A8CB3342A60108
+:106AA0006A3414C6315C7C5573412009DBFEBB4659
+:106AB000EE51418E6AA8FEB6DFBF27C8E2C9E9F4ED
+:106AC000B64234C35F027EAD88789274DAB6ADFB0D
+:106AD000A3B850D9CEF655594BFAD917DF1364F144
+:106AE000E2B55BC666B1B88B535F9DE5F6E127CF93
+:106AF0003CAE76839E79FAC4F5B0CEF5FF53221AE8
+:106B00009DF7EC3399A413ED464205BBB1AE434A61
+:106B1000690F096962F9F3EF6522BDD63DE7492C9B
+:106B2000A0EFAF7BE19D4984C2777653CF6B23C141
+:106B30009F7E5A607171B37BD2627A7F9D4C56A75B
+:106B40008AB34C90D93EE4F48F325680FC0A6D072C
+:106B50006FC671DB972B6057AD7E86AC20BFD27EAF
+:106B600068B7CDA784C45821157C2C1F71FA2981E0
+:106B7000C17740C1FDDFBAB6BD6A94C251D3F621D8
+:106B8000EA8BD9DF7B360078A8392039FCB89A36F1
+:106B9000A9D33309AF27E00A71566106F009E797D8
+:106BA0008E0D185FAD6E7FE0432900EF3BF516C5F3
+:106BB0004BA813F0FAA6145A00ED1FFC63C0A0A85E
+:106BC000FAE0F01301C02B1D778D9A05717C277FA9
+:106BD000C3F81772FA8E47391DF3BD35ED5BD87CCB
+:106BE0002EBDF801FC52D0370E1B919D7974D23620
+:106BF000B83CEFFA67CF3D6AD2F94E3FF7FB474DFD
+:106C00000AF75D7FF9F747BF0E72F9CF5E1DF47A80
+:106C1000CDD3BF0C101B1FAE9359FCE0EC28BA85F6
+:106C2000A2FDCEFECA930087E0EC4BEF8D36E87AEA
+:106C3000CF7EFF4FC30DDABFEEA5B9F9B0FEBAE7BC
+:106C400067E7F7E7C7009F263C76B81238BE714069
+:106C500060CEC28BFCEAA2CBA18E43A301CE33C788
+:106C60003CB83FABA1F7EAA7029D36A09D85F6464A
+:106C70008ADFEA67367F08FAA12F9ECD912206BFF0
+:106C8000A81A0C029DDF9987F4223D681FDDFD6B79
+:106C90008E523A4E4E4FB773E46315F45CCD335BBE
+:106CA000D87C2EBA9D815FAEEC4BB7CD2EBA9D231A
+:106CB000773D560089D78E618E3C8275ED8D9F475A
+:106CC000B222FDE8074BFE07C22BE659285C4BE5D4
+:106CD000F0376490A3E73292745D00747DF6DC684F
+:106CE00042F9E27DA5E766B0073D2F79F47DF4FE19
+:106CF000BA97DE44B93AFBFCEBAA81768CF805EA38
+:106D0000579E25C99FC3E06756339F93D4ECCFECC1
+:106D1000F4047AE9539D58586904F0FE09BC9F6059
+:106D2000FC5E9D38B8444841AFD7E5314CFF27F2AF
+:106D3000102F1BF6FF46257E271D8532A0E389799B
+:106D4000703F1D1DADF5EBB0FE99367AEE6772EA25
+:106D5000EE5F4DE511EC5D92AE09E14D92422ECF12
+:106D6000EEF5C860EFCE825F95326FCAFC99A1E65E
+:106D7000577E263BEBAF92F9158E87F4FCC1E47B7E
+:106D8000A0F50D157F3F920D1CD78DC7D31FA7D639
+:106D9000F7EF717D514DCCCA1197F6F5436412316E
+:106DA0004716F5C27B1A36A894FF4E3F2D613CA8CA
+:106DB000A5FD10EA6DB79EA84E13DFBC20333FA19E
+:106DC000FAC0C149A0CF4EBFFC23E4CFEA674EA86A
+:106DD000102F7EADED076A7769AF3C803D48D8EC57
+:106DE000C1E9EF1E9CC4F4001D3F059D14858D5F15
+:106DF000F3A273FC9A673E748CBFDE6C47FF60A001
+:106E0000793E90C3CB61BD1F1C5608E8D10FDAA5AF
+:106E1000CA547EED07DC1E5A786A797DDE6F200F3A
+:106E200036ED88CF00BBD9B1299CBF1DFCB5230A24
+:106E300001BD4DE4F0EF3DB4DDF1BACF80FC74C785
+:106E400091659261DB87FED085CF9947CDD9997442
+:106E5000BC99DD9169E0A2BAF546D971BAAFB2F139
+:106E600041DDEB95F9A0EF611F6A8C87F94241D8AB
+:106E7000E74A8179952C7F2DEADE94F69A8DA7F862
+:106E80002318AF5274311923837147924423C45796
+:106E900089DFEFCE4F44347B1E6AC5E183B0C5CC99
+:106EA0005DFC62018C132031FD24FA9F2474B11F14
+:106EB000FFCB9D8FB0F09994BF34F9890CFDE6E0CB
+:106EC00041D277BCBE7998A806F1ED16FFDAD6223A
+:106ED0005B1EA625D8270F3357A178681548CA78B6
+:106EE000ED78A562BE9287BBE368AAE737294CAE6E
+:106EF000AE25DDF7AE0138232C9F33CB85AF2F7144
+:106F00007CFDF364BA70AA42CBC1B3A2F89DBD2444
+:106F10001C53E8FDB9AB7A2E7F19BBF37C8E395E2A
+:106F2000BC983178FC0D356F17F12CBA5D1944DE31
+:106F30002E5DFEB8170E93EFC7731C798C436FDD7F
+:106F4000AF75639EA1B6B5C816F71BDEE92561CC07
+:106F5000E319E81F0EEFBCF39BB741DC39B730E40F
+:106F6000257DC7912F5C8D71232B9F2F17863B2189
+:106F7000DE2FEB46B984F32C0F437E61B3C1F205DB
+:106F80009B83FDC7F56628D16605E351D7E0B8A21B
+:106F9000C6EB0F06B9CE6F2C0E209E0314CF20EF48
+:106FA000B8FF81F51D1778DEBCDB94207F78221BAB
+:106FB000F305019994403CE0BCE00B6DC27C823348
+:106FC0006F9E8E7FB7CB26E6CD5B8D3E79F3EF28A3
+:106FD000B67C8396266FAEF99760DE5C23367FB76A
+:106FE000A8B75FAFDCB9F2E63016C665B6CF86B893
+:106FF0004C733671E4CD9B41F0AF22E439E5EAD918
+:107000005877E6E5CFCD59B3C3F63639FE32B679B7
+:10701000FCE98FCDE73641FFDC91A416EBD4E40800
+:10702000596AD383EF292C4EBB4109FF50B1D71DBC
+:10703000717EB0F23F87DE7A0FF90AAE63285E9B5D
+:10704000295F7990AF4E11BB5EB5AE16FF341BFDC4
+:10705000F3857A610AC6CD92EDA0897C110846C3FA
+:10706000E114EF4DF230B9B7E60D94513D4AE54DCC
+:107070003122988F5275BAE135060F7F3AB82C3E0F
+:107080006D36C6B03A289D60FD5EFA754C63714C52
+:10709000887051B876DD787BA83F3FC75AE70C254A
+:1070A0007CD28EF7DC4B52D7EF56AB6CDDCD9155D1
+:1070B0002CBF5EE5CCA742FADA1E679D2E44FF5D29
+:1070C000C13821CBA78A5A84E7474C2B3E1E4CC6B9
+:1070D000C30DA833BCCB047DA8AC6A3705B8E6B2B3
+:1070E0007C4AAE16FD58B1D90759EF6672EBCA0F4C
+:1070F000CE954E0F09BF565DDCD6061DFDF42D0D55
+:10710000416C6F6E30F0DAD210C6FB6E3A361B2F30
+:10711000076FC1BA341FC665D38DFF604308C789A6
+:107120003594B1F178DE9C90CC26E02B55B4E46523
+:1071300018B6FD127F6E163481FC6D17D8F36B5AAA
+:107140002E4579B3F86787D17F5C5A4ACC403E1808
+:10715000EAF87DF9F527B8CEE6597ED4AF03C951D8
+:1071600056279B77B0F328497BC1E6D9314BC379C9
+:1071700076E40E304F9CCD3330FC0C5FDB0E9EC2AC
+:107180003A0485F203A828450FA7AED3E3F2D677D9
+:107190001C0FEAF9E620AB0B538BFD6150FECD06C8
+:1071A000CF3716B27CA35A32BC02EEABA1CBB04EA5
+:1071B0005C2DF5633E4F2D1E7E0BB4B71DDCA25730
+:1071C00080FD2814435E03EC76379173516C307E5A
+:1071D000AB1697DC06FD7590630AC7280FDB6FA915
+:1071E000C557DD01EF1F9CF29AD144FB3717FA42D5
+:1071F0001E90B76ED9C1FF83D61385CE3C1A91A9D4
+:10720000BEA0FA6BDB94DB4B503E355B9D648A7A03
+:10721000419BDED8A0DAF4864AE6988087747A87A4
+:10722000DADFFBD4BCBEE358EF6F5022F52AEA85C3
+:107230000871D6BBA7CE675BF400370BF2917230B2
+:1072400059A7B7A060786F7EDBAAD373E7B5E3F4E4
+:107250005FAABCB6BBFEFCB3AAD3DBA926EBF446FF
+:10726000419DDE8F1512EA84BCFC2FA5D03EA32FD2
+:10727000DFB9C7739FB7A0FE8F06FB9C7472F9330A
+:10728000D5993F2D88BAE87EABD731DF2B202FA5CB
+:1072900003EB979155CE7146D53AEB6A2FA9CF7182
+:1072A000B48BCC118EFE97B68E713C1F1BBFCCF1F8
+:1072B0007CFCEEA98EF684C4558EFE97B75538DA5D
+:1072C00013DBAF73F49F7C6091A33DA573A5A3FF6F
+:1072D000155D6B1DCFA71F5EE7783EF3D83D8EF698
+:1072E00095DD5F73F4AFA7EE900A729BCBEB9073C2
+:1072F000F3457B9EB6358FDA25BACFDF9147190665
+:10730000E3DFACAE4B658F937943F77BB2A1867513
+:10731000CCFB8F9B035722D7A13D958DE11506DE4F
+:107320009F310FAE649AB3BE5635587D32ECE39C64
+:10733000F502CE3A6355DA86793ACFF12F77099381
+:10734000FAD2552D74CAC160EB9415C3F5DE10E571
+:10735000E2BC2517A3A85C60FCED6309CFB5CCC9DE
+:1073600044FFC2B69F423C5AFBA96B34120317D3A9
+:10737000928BF2553D235FC56ED63ECA230EA52ED5
+:10738000CE92BF804DEFC37EC5D233CD6583D3AFE0
+:1073900052E20A873FE9BE3605D6A5D38F051E9B6C
+:1073A0007FEFD68F339448213CD7E4B0496CF11A73
+:1073B00052AB38E01E2C9C9FD40EDC45198EA4D015
+:1073C000E32AA9C5BAAB9615610C02903AE2E0D364
+:1073D0009D8BFF47198C4BFDC219CE7532BFD0ED86
+:1073E0004F53FD86FEF40EEA4FA3BD73E947AAA7EB
+:1073F0004C5EFF65303F82E943F73A3F2F3FFADFAB
+:10740000C059ED875E81A25025EE0FF34402FBC305
+:10741000E6599120C4E7ACBA79EBBD56CFA5384EFA
+:107420002C5715217E19EB9A8BF1FA262DAAB13C27
+:107430007114C769CA16F5547562751E962FD6EA7F
+:107440001F18BBBF9FB88BA69268AA78DA4E0FCBE5
+:1074500007C5F4B55D604733F35403F6DCAD074F61
+:1074600045208E2497C93AECD70905E61D5B7E8F2F
+:107470009028C699B4A0887657ABDF81F30F04EF4C
+:10748000CD1E819FFBD8D22FBC5E3575DC251DBC7F
+:107490005B00DE6903C3EB05788B60FE6D387F8D82
+:1074A000C748897F85842B6703DD4E7C3982E95686
+:1074B000CA36201F3BCAD8BE9C1A02077F5BFB1C42
+:1074C000CADF0F7BF2B07E15F9DA3AE770A347C73F
+:1074D000792CBA92C21C8C6B04A2B1B1C594DF3274
+:1074E000A36C3FDFAB9F181F652A6102F12CD92FD7
+:1074F000627E50E5F110ABDF1F383E9B667523BD01
+:10750000365F29934D426F9D75AC90AE6B72EFBAAA
+:10751000FE8F279BF1279FD7479664615D8AF44CC5
+:10752000B03FBDEDE3F872EBEFEF79B8FE2E20052A
+:107530004C7F972E877C77BA71DC7E4C3D8FF30EA3
+:10754000BDBE9E9F2FF0DFD30571262BCE4782D381
+:1075500052C6E57BF1CAF295BDF45D6E7452FAC96C
+:10756000D3A7629EDC3AAF40D599B35E98D3D7A239
+:10757000AB15472741163FB2E8EC4DE2734FBFF819
+:10758000F482BC5CD1179FBFF2F07CC37F317CBE1C
+:10759000023E0DBD6666B2F3E9E4D05709E6A50ADE
+:1075A0009D7268BD67F1BB7BFD7FFA2FCA4FD6FA8B
+:1075B0002D7E48DFDF4CB9AFB1F2AB999CDF343898
+:1075C000654515CFAB656FB75E0AFBD7A01FF77D8A
+:1075D0009965313CDFAB105307BD9069ED6BF879CD
+:1075E00023AB5EC957EAF4CB34D7FE45E575517D30
+:1075F000CEDB72FFCD7D8E2A895F17BD266B69F2C7
+:1076000063833C7FB48BE7EB0AEAE28DB01F2EB8B0
+:1076100095D5FBEF51C86AA8AF1C51658ABE5CC8FE
+:10762000DF147D3F83AEBFE0C5871A4702496E3540
+:107630008AC0CD7846331C76B8E0AE78B98F3D9FCE
+:1076400002E33CA531BD5B5019C773CE4DCF8FCF40
+:10765000023FE195B796EB101FF828B718F74F6770
+:107660005EF08441FF9FC921555817F6C2CCD7C0A0
+:107670008FFF7D43578E6CE39333DF7D7D86428998
+:1076800074E6B9D767C848AC8463FE0D177F310331
+:10769000E0362B48492DE4EF7495C0B8351ACB97E6
+:1076A00059F53EBB86AB2D70FDA9379BC513F3C5BD
+:1076B0001DD0AE878018F80D3C9E7FF5696339D4E4
+:1076C0005F66772902D4E33D2498A69F5ECF9F781A
+:1076D00048003F4BEDAC85300BBD1F3A042837C73F
+:1076E000B27DC9F922525244F5BEEF70ED78F4A78D
+:1076F0005DF54E16FFCBB309E6FB7A6ED41260AF90
+:10770000B7CBC6375681FD5E25633DCE76F930CACC
+:10771000859B8EC7BD639CF5B93C1E7DE8AD3BE201
+:10772000E5F4FD7BA688C8AFFE1353B2480AF9DD25
+:10773000DE5086F3070ADEAE2C07B03EA67767F46C
+:10774000EE93FC3231B3A889548A4453A178F1975F
+:1077500011F2B68DEF5A4412D6E9F3171A088ED3F8
+:10776000D1A0E1B5AD411F5B4C3706DF6A08E27579
+:10777000678381D7871B4AF0F9830D2187DCC37C9F
+:107780006F97F0760A7FE5F3BA3ED040E7B5C1B116
+:107790006B22957A4AAF5D3C1FF540E9D4ACB5FD4C
+:1077A000C4C1F634740D9B3396230BEA4DEBF4BD44
+:1077B0005BFB817F4FA3B07A11F83577CB917DA821
+:1077C0001FA3058B6CFA91FA6D0584B2E2BD2D23DF
+:1077D000E6CC29407944799976388AFE7841302E72
+:1077E000401CB1E028BB6F9DB7407A5141FB61EE70
+:1077F0001C4101BD594ADA012CB5344A2A68FF9967
+:10780000794BCAE13E99E8BC3F4365F20DE356D09F
+:10781000EB6C2DF2236D3A7CA763B7F92C5DCF1F7B
+:107820003B3C06E4791E7CF94F2AEC0B62BF5235D3
+:10783000F0630A5E3C81750F31A15B85CAD8E35ABB
+:10784000F51C99EA19DC0C627C952A16CA2731D0FE
+:10785000B118FFEC89CDF1C37997E8297BFF5DBEB4
+:10786000E8DDFCE448580B523E4AE62FD6C7C27406
+:10787000D3F902CF5F1CD7D6C5CC4268D3FE53588C
+:107880003B46DF7F213B3A52CC86A28BAA58D79742
+:10789000A06DF5AF8A41BDED9B5CEF107FB408E4AD
+:1078A0002DD9D6693BD3D696599B68EC6AAD77C380
+:1078B000A13FBD067AAEFA45A11D40A37A8FE1FF34
+:1078C000C0435877DBD6D0A5C7144E7F8B0E542407
+:1078D000270409D6D3A909213186EA8F09FCFB14B4
+:1078E00005D3C24623E8D7841202BD19F231BF7115
+:1078F00042828E6393AB0969BE8382795FA0E336CF
+:107900005637ECE6AF67BD2C3F504FCCAD90072308
+:10791000CF283AE623799CF2B465E7F87EF52E2F5E
+:107920006B2A9B4CDF65A07FD6C818075B5F142FBE
+:1079300057E93CEB7F5414A29615F24A58D7B03E53
+:10794000BB7DF854969772B41FE275B4C16C331BBB
+:10795000CE0F541F786834D4055493F8CD5F037864
+:10796000FF95E51F4F1DBC32EB6ADADE40DB107F6E
+:10797000DDD0F1BA1AA5FD8671B8AB3BA65C07EB6A
+:10798000ABDE2612B188C967783CC573387E994C46
+:10799000F9E49AAD23E77A299D9F1A13D645CA07C1
+:1079A0002B7DE39A3568ABFA04909B95BE89CDC0D8
+:1079B00057EB27F2EF359089AF86655E2F45F96268
+:1079C000D8968618D427EC5F59791D98D9E122936F
+:1079D0005BCA88983F94B26398B7F843333BEF0291
+:1079E00029FD8D940EC532E992E97597CAE867B60C
+:1079F000C8182FA6F75B95A940977818CF57B432CF
+:107A0000BD3FF6450FC69D8B6BC377A25FA097E283
+:107A10003E653449FE605EFA12F88D8E335E27E5CE
+:107A2000700EE1C75E162F2C5EB16C3DBC27652E33
+:107A3000F1E1BE5C62E7A0C8B7599C7A979868D715
+:107A400040CE03C548DF5D01C617E6C3A5C817FBD6
+:107A5000C58ACBEE86B8A4B066EBBF005DB38B09D8
+:107A6000D015EEDF43EFEFE7F494B2433AD06F3F27
+:107A7000A7672C219A501F63DD7F41587B27C8DB05
+:107A80003AEFF373348AD7E19E707C18A5C39DDE6C
+:107A9000E763C102A4C3188DE2FDCE2D1D316D1424
+:107AA0001DA7313C42B7B5C7FF997A23989FEC4098
+:107AB0007996B31F5E07F24E9FBFA2D1753E95C364
+:107AC000F5057F5E3C26A93FC284DA1AA9B1579F0B
+:107AD00068D43E14DBFACFA1FAE0C947591DFBF583
+:107AE000743E9077BA0ECCFFF64C9013509FE5A3EE
+:107AF000B080DFE29B3806EBF3E8BA09F8253D13C6
+:107B000065B4B3561CDB3341C4F812F4077EF08D24
+:107B100062FDA9A044406FCA8532EE5765694F786F
+:107B20008201E16396D715F485786ED55B62CBE36D
+:107B300092DE3A606C17E1676E1CEDB19EEE029129
+:107B4000FA95B9C7170AA3E9787778B9BF9D4BFDB5
+:107B50006D7A7FBD97E9A5FB23E69721C4418CEEA2
+:107B600002D44F243215AEF93715E747FBB14B7DF0
+:107B7000FDEA6EF41F76F8539FD39CEE63FBF92663
+:107B8000FF111DF8AD9E50F907B9D019BF59FAC3BE
+:107B90003A9FE0AE27B6F48992CDD65837BF221F60
+:107BA000F480CCEB93643DA4437D6579E634F4FB2B
+:107BB0009EF432BD271DBCF20638A7A1FE2BCB0BCD
+:107BC000EDF146319ED45340DA815FE56098D8F3F9
+:107BD000BF963E6869D0F0FAC4D4711520274F4C87
+:107BE0001D5EA153193834E9C75D90673AB787C95C
+:107BF000EFB9C3B7E1F9C773268B37015B615CB29C
+:107C0000F3113CAFFBB81C7910EB6AA13E8282B441
+:107C10002DDB59BF55CCF16272FDD4ACB0E79B1B94
+:107C200058FC58BD7039C6B554AEC73DD15BF1DCC8
+:107C30008687DA32385FA911D364DF3B6078D00AD7
+:107C40009DDFC3502F4CC2F74D2F8B1F59F522EEED
+:107C5000BA100B9E191C9EBEE7329CF4B0F65F165C
+:107C60001DACF7EB8470BEDE0FDFD45C9048C2160B
+:107C7000FFE8ADEF56F1FE59A88BCF823A9E68FC23
+:107C8000EA22908304EE8FBCFE3A42F8F795904FBB
+:107C900083728FBD0E3DC35517DF475E0C67DB5DFA
+:107CA00017B11E9883D7F1613DAB4CBE29507A9F26
+:107CB000C9F8ED0CF06B6BA87AD02040249B3ACC2D
+:107CC0007F96FBFBF28B7787471A363E170CC73E31
+:107CD000A1FAC0428C23D4ECF763BD7F35E8BFC95D
+:107CE000706EC0ECF238CE0B843BA13E4F39C0C65B
+:107CF0007B12E0A1F7FFA85715C0BA8FC3FE270F6C
+:107D0000EC495462875E0E231E62DEF031A2337DA1
+:107D100026539E88655BFAAC3A061B865D2A71F88D
+:107D20004BBB7CBCEDAB8EC54A7BEB3F8E6BFF0F34
+:107D3000F59B55DF715CFB0FF48776A9F14ED07788
+:107D4000E60B1E03EC177D1FCFEF9A2B4BD00EC412
+:107D50008AC808C0C32BD92AEAB9D8F39E7DA0E708
+:107D6000666BD13735DBBEE14CF61BA361FF956234
+:107D70003CD331DEA8A18D47E7EF00BC5ACF5FC9E5
+:107D8000DE85E716E97B06E60D0B0F8F5E43DBC34E
+:107D90005FF0E0B9216BBFE9E6CB7C2E5F2DAEF33F
+:107DA000802AC89B1FF46D2DCA9927E8CC8359728D
+:107DB000A75E98E0C8073C097696D24F95A310A21B
+:107DC000A4CF4BF1B9C9F9AC85D723A49F2727CD00
+:107DD0003C57A03CA79F67069777C2E558D693DF2C
+:107DE00085E9E7DCA03B4FE2D653D6D5D253DFE29C
+:107DF000FC2993E8153E3ACFBA44FB3C1FBE1D9DBB
+:107E0000047EF0071A3B0755D2F6D0CB609EBFE93F
+:107E100009DFEF9D8EE7BEFEC99B37747958E923D1
+:107E2000BC2EB38F1E62FED5ADCC5FAD9B3F15FD62
+:107E3000BBBAED6374FB3945F7B5EA4286430F0DD3
+:107E4000F31AFC7B7B26EAA3AA0B017CFED9CDE7C3
+:107E5000759C5FE93B9F1F9F5BF3DDE5D2B38726EF
+:107E6000FD74179C73AFFBBE227A6CF3D47D9FD751
+:107E7000FF7BA9DE75CA7B18E45D2E22C9FA2ED0DD
+:107E80000FDB54AB1D6E9E330BFC5A9B7E2803FF09
+:107E9000ABF77DF8CEDD361FEF6F56A6EE9FE1EA19
+:107EA0003FC61A7F21F677C393D43FB01FA3FDE5E9
+:107EB0003F7B2CF8507F3D24BAC6CBB1E6BF11C73B
+:107EC000B3FCEE8BDADA574D19F8345E0EFBA79E41
+:107ED000DB8801DF9F785C0EF94276BED518BF566D
+:107EE0005DB8D441EF5EBC8F73DC7FAF21E8A8D7CB
+:107EF000BD235A8775DA1779FCA98A7AE6F8DE9EDF
+:107F0000918E3ADDBFC1F149E1B83A0D1CD77CC171
+:107F1000701439E4B3178E62C7FD4F0AC7428DE96A
+:107F2000AFE5FC3A5767E766E71A42A889DE9A4B45
+:107F3000EF7B29AF7F995E357A9D2B13D38FDF4579
+:107F40004DB0FEB40DFBFB1BFE7CEFBBD762A22A3B
+:107F5000E8A82B90789DB75BEFC0396F56EFA63934
+:107F6000BE0F675D7D12ABD774DFFFD0C7F0F28D17
+:107F7000CBAB09F8D3D4574F796E6D975FE0DFFB39
+:107F80000C8A8E38376F5B75BE9F155C72069BEF4F
+:107F90001B975F4F20AE2BE7A6FEBEDD413F83BFA0
+:107FA000450B639D784CEFFFBB349F149EE14978ED
+:107FB000AE413C4969F0546BC1A3B3BC604BF0F3D4
+:107FC00081A724C3A25BFFF8D9CAE126172E413E40
+:107FD00092389D5A60FF96A2BF95FF68D13E5FF828
+:107FE000C383A4EF73195F0C7D170D92BEC55C0EA1
+:107FF0005AF4CF179E5B0709CF7516BF05C348AF6C
+:10800000CF0B9EAF0C129E6316BD8CCF173FAD49B0
+:10801000FEEF1F9EBF70B8F333581CA4A5849D27A4
+:10802000F14991078B8481E5C257ECDC676B853E93
+:10803000679DCDBBCEBAAF74EBFC355F673A795A1A
+:10804000A924F2807EC71A583CE00DBE3FF9755551
+:108050005326C6E75DF3B404F765F617B7F9EF5595
+:10806000CE73B903C9F1A40C96FFB931EA7C6FF95C
+:108070008A0C571D9989FD2CFCA51BEFAF056F617C
+:1080800048620E026F145F5945FDEC1B3E6B7CA5E8
+:1080900093BBA1E22BA60F0D5F03C9FB5786882F68
+:1080A0004B5EFF5AF1950FF89AFE37FE1A2CBE165A
+:1080B000FD4D1E8784AF5B872A8FDCAFFD6BC5D774
+:1080C00060E5D1BD6FA3FBBB507FDF17F8ACF1E7D4
+:1080D0009EFFD3E2D11A6F659A7D5E3A7C0E0487CB
+:1080E00075FDD03748BCBAF79F5F345E5DF37F6A99
+:1080F000BCF2F1868CD701E0B0AEF220E5DBF2EB0A
+:10810000DAD4D4DF111D97C9BEE3365EA83D321F15
+:10811000F2C77F27617EFAC89E391BECF540E33237
+:1081200099BF7DA472F606889F9E8B6460EDD9513D
+:1081300031F4F36990575EC4DE738F7F84E3CB9391
+:10814000996DC57FF380AE47238BFB954752695BE2
+:1081500017E68D6CF495FAE2FB0831B64F833CC408
+:1081600082D47058744E37EF50E97B34F2F890F4B3
+:10817000CF40EBFD0FFF9841EA9F04F6CB25C9BF26
+:10818000BB7319E0B34D64F570C7E156017CD78D20
+:1081900060A7E52BF2F7029DEECE64F9C30ED5D8A9
+:1081A00000F913CFE2050F6452BA1D5D9A2DD8CFA6
+:1081B0005FCEC964FBAF19AB52EFBB16723EE87DD0
+:1081C0005F20E353F07798F75BBA8A7D7F8CC8E134
+:1081D000518B6CE74ED7BB9EF7A1476600E1389AFA
+:1081E000E6DCFF02FEFEF225FDBF4F6AD9F77D28CF
+:1081F000DF8DB29F7B4DF219978F33FEE8D24C7A18
+:108200007D43887EE73EE0A3097E766E4826455092
+:108210007F658D932B934E95E2FD5DC5180579CD55
+:1082200014E3DC9C393DFD38E9F06AADC79A074498
+:1082300011BED333576371C46961426641FCD013E8
+:10824000BA9BE50F191FE4F03AC499B5198946D8CD
+:10825000F7CA749D36783BFEEFECFF06CF3B8E8865
+:108260003A9E6F77E16120FDD094C9F2C9B952748A
+:108270009317F226AB8594DFB1DB98C9FEDED1A45B
+:10828000CC64BD14CE336E675481EF5F2C9359FEDE
+:108290008B90E8A885B6F927717E73BF972BB17ACA
+:1082A00023F22693E7B67DEB46A5929F5F70399D3A
+:1082B0009459E2A8735C12B95B01F95CB260A162E7
+:1082C000F8E1B981E32FE570B4A9D15153FCBD7831
+:1082D0004AAB87387E3A8E459BE0BB1FABEB05ACC3
+:1082E0001328DDC8F86EF5C683E2067ADDCBE56FAC
+:1082F00021D0C036DE77395DDBF6F94603FC6DC967
+:10830000FC0D1D98C271F36E82F99027B79F6E81A4
+:108310007C48B74078FEE4C64AA86BE8E6F56D2FC6
+:10832000D3E78D80BF397928DFE3367E5807FAB965
+:108330004325785EE6775B3C09384F60F14B524F3E
+:108340006C3CDF00F5C38FA89D13816FF29A6AEF32
+:108350004B953F7D89D3E18FFE48562A3FD0BA5ACC
+:10836000FADCEAB748369454FD1757BAEC1A877B03
+:1083700098A7F30C4991C74CF261A27F3FED975C3F
+:108380008FFFC295E75D722C759CF1579C7FDB12C5
+:1083900015EBD16E991E3C8762C163E12BD76478DF
+:1083A0005AB64472E8DBD50B325C7E0FC3EB0D1E70
+:1083B000E35158C723FB7E3A11CF51B9EC834F8A62
+:1083C000AAF0FC0ED2A9809E785F32F0FA4683F3C1
+:1083D000EFBCBC41A2DBA783FDAC9752CAD51F39C5
+:1083E000FFBCB1E296A5087F4CD201FE13AB865DBF
+:1083F0005F06FA65851282EFA69F88DD9B799B6DEB
+:10840000FD49BFC605D7AFAB6EE9D76E2D5FE1A4BE
+:108410005B9BCAFC02F33A268777521E9D85FCD5EA
+:10842000BD7D269DFF482267CA56D69DC0DF995A5A
+:10843000CC7F7F5F8CEE9849F5CD2991E549CCAF93
+:1084400030BDB16467A41952A7A7EAAF78A99BF61B
+:10845000F30618DFFDB6BE7FFBE8E6A7713B9DFE85
+:10846000DE8C634485F7A375A9EDC1B7F50CFEF763
+:10847000C442A341BFDCB43175BFFF05CC4CE13928
+:10848000F517A92A557CF22A9DC1BB3A92FAFDAB99
+:10849000F44CF61CEC520A3C9F0B64703DA78F060F
+:1084A0003DBD3A0DBC1F060208EF3BCDF7DF04755A
+:1084B00020EFBBBE03FF4E80F1C5C100E3EF53FBCD
+:1084C000562A7940A71641077E783B3B3401F86D68
+:1084D0004DEC049E7739C0F1FCA62F3225301DE407
+:1084E00065D1DC3C4A978E55242418E9F5FF9501A7
+:1084F000E637E4F2782DB57FEF82FDA3AFBE8BFEA9
+:10850000871C1E7DE34456020575E0A744731DD603
+:1085100019EEF3B1BA52129A6EF7E3BFCCE138B557
+:108520007F68F45E1A71F9417DFCBF7835CEBB3FA0
+:108530004387BA94239552E7B514C893FB33F0FBF5
+:10854000B86EB94837FF50FDC053FB87E6070EB43D
+:10855000EE0D81A241F981E72A1FD9310DE4488D42
+:108560004F4AA57F2D3D7D94C7DFDDFC635DBFCA0B
+:10857000F9E8FD44FF70DDB1DB09CF4DB54E782C35
+:1085800079793FD1E45B0378229D13ED7E299933FD
+:108590007D003BCBF253E9E0DCEED213C07940879B
+:1085A0003BB9BEF96DFD23013B1DDCEB3F25F2FD20
+:1085B000C1A3AC2E776C644D459ED1CB9FDFFA9C56
+:1085C000F8D2B233EE71FEB3F3A165E706E2C3DC85
+:1085D00034799C4970D099BEBF46D655C8D74F0A4A
+:1085E00018AC4DF47970548B94F1BA51628C86F3C7
+:1085F0005FA7F6F9F0EF43995B3D89B15404DEDFE4
+:1086000077F504FB7A7EC5F974F5926CFCFCC4FB2B
+:1086100062687E3ED69D49F81DB7378EE5CC83F65D
+:10862000238745D0D0E4A6BA3512ACEF8D00DB77B6
+:10863000AEDEF83AFA8343E5F3D5B54EFB7F155F1E
+:1086400047D2CF927BA601FFA4C3C36B1C0F4B2361
+:108650000BE7827EBE65A380FAF627300E5DC82D3B
+:108660007218F5368931FB48348A0F6A424EC022AF
+:10867000001FFFC0BF5B254754FB39B9DBB6DD3FA8
+:1086800017FC43B7BCACC8627C5C91C5ECC29BBE16
+:10869000E81F40DF5BFAF96DA1F6603EEDB231A054
+:1086A0005BDF094639B5D6B391C345FDB467F1FB2D
+:1086B000C57C7DA4C7C56F62BCFAC780FF0A0DFDEB
+:1086C000029F87EA7DA88B7EDC877554965C59FEF5
+:1086D0008EFBFD6572D4E13766661539FC77B71FEE
+:1086E000F2377B91BAFF15595FACBDB836EBB3B129
+:1086F00017C3389FB9ED4652AE5BD8799013C73E89
+:108700009A9B4AAE239F100EB73CBFBFCFC7BE9BFC
+:108710007C4D26EA9DDEFD547E02F6CB6EB980FDCF
+:10872000147CF7E3917D3F9B0875BD27B6DF7F532F
+:108730002A7ACED299DF44BAF31DF1BCB50182F595
+:10874000DF84CEF7846D7CEBBDA4BC0C10BF5CB69F
+:10875000F24ADC4FBEB1F2EAD16B4AFBEE2BFAF4DF
+:1087600017A2FFB014E66DE4FBE91D9EAA7DA9F6F1
+:10877000811CAF7DE3C44EFF7EE9C6F266D8526F1E
+:10878000CAB8E64BD114F327F7351B53C7E31EE4F1
+:108790007A2AB9AF31E9BE86E2A37B9514289BD62D
+:1087A000BBAFE9363F9F7DCDEF48CFCF67A2FCA797
+:1087B00086EF7B167FA9D11D5752F84ED1FD8F0948
+:1087C000F223D2F7805FBE957ABFF6387FEF771B32
+:1087D00087A8AF8E39F733E9E4EF7B9F91FCB5A909
+:1087E0003DA3400FFC6EEFC76FDD0FEBD9EB437C71
+:1087F000BBC789E812DF5FF8906F2DFBDCA132FD6B
+:10880000FFBBBF1B817F37DB2D1F84C4AFBF8A3EF8
+:108810003FBE4F9C02DF596CDB9751956A9FB35E58
+:1088200017787CC919EF21DCBF5BCAF94DDFF774FB
+:10883000AD3D1EFD26D757561CE07F67313BBB641C
+:10884000C14215E23DB725E34D04372BFA65857B20
+:10885000E1FB17BFE4E7B9CCB59929CFC7FD86E3A3
+:1088600077A038C48A55CE38C19205FDDB9B938929
+:10887000D47559163FA79B6FA8F6A52D31B4BCD867
+:1088800040EB1CA10FCEBE2C25B55F8278C73212FB
+:1088900052E0BA84D44EFC3145E5C9DD8B119E5FB0
+:1088A0005A7FFFF8E37B27DAFD98FF0F11FE85A1C1
+:1088B00000800000000000001F8B08000000000086
+:1088C000000BDD7D0B7854459670DDBEFD4AD24924
+:1088D0003A9DEEBC091D020818620742001FD02114
+:1088E0004482B2DA810041519A87184948A2E2CA0B
+:1088F000FEBA438720467466C2AA8CBFE3B80D82D5
+:10890000EB286AA2D1418CD8A0F8D8D59DA0AE8B17
+:10891000B3E846C7415E4322A32BB3CB0CFF39A774
+:10892000AAD2F7DE744370C7FDF6FBE338D7BAB7B7
+:108930009EE77D4E9DAAB63915C63C8C7D5B73FBC8
+:108940005F4D628CFDABB579BCD3C1D859FC9B1E81
+:108950007DFECB3AC6221731F6E13A3B8BD8A01CFC
+:1089600036558563D4FB53AA8931E8E85FE1C14AF3
+:10897000190B2D50C33B94C1F5B2705CACB7785E57
+:108980006A30463FF2B9A04665113BA3BFB3F06F12
+:10899000CD9C245DF922A753F4D39A182C62EC885D
+:1089A0001CF7513EEE91307F2FFBBB488C7B247C23
+:1089B000EE716F7E04C61D131DE78666FDB8BD2CE3
+:1089C000B48AB9619C70A2734701C3FF8CD8264456
+:1089D000DBEF759A08AEEC48A689653076876C1B8C
+:1089E00067BC0F057C8DF56BCC7E8B161FB7A77A05
+:1089F00069FEB25C33473F4F6F8A938FCB9CF981FE
+:108A000064C68E6E4BF4133CA6258747C13C2BED04
+:108A10002CE480793EF8E4C59FB1118C2D13F8AF9A
+:108A2000097C6D41781C35F5DF938CEBFAC0E4DCF2
+:108A30000143951DF45BB4F0BB2B85C3EFE8F673DF
+:108A4000C3EFAE143ECF7955FAF9CD3F98A82B1B52
+:108A5000D7FBEF7F7BEF04ECF7DFFFF63B8BB6FF36
+:108A600005A77359243D5A5E52ABF8C34583C77DB1
+:108A700029D53A24B8BF6480E392D3F9D4BF5B65AB
+:108A8000CD1D31D655EEB453FDF981728B07E0B997
+:108A9000FC6EC5A74017339CBC9FE566E6EF80F9E6
+:108AA00030B337BF1AE0EE696DBE2310A39FFF23DA
+:108AB000E0FD8D23901A8BCFE4F363410FB2DE0209
+:108AC00073D012ABFEC25A3D7C7B19AB8A35FF1FB7
+:108AD0003B395F0E951EE5F8C6FA439DC7DD820E51
+:108AE000D36D91DF33155E9C807ECA2E605C437D22
+:108AF000E3B8F73BF5F8338E7FF4CF6A5D2C38BCD2
+:108B000026F83F1800FA89F93D99BE7FC0DA1B7735
+:108B1000137F27F9762018B62FFF09A09DAD9C7D05
+:108B2000C75BF09A25A614D0FA16070E5412BB9D07
+:108B300079B018F1FE6DD5833F2985A91DB5065B77
+:108B400093A1C1D1F58A2FE41D3CCE07B84E90A366
+:108B50001FA13CBD08FB639C6E67C2FF65333646B0
+:108B6000F5D7A3506177D9BC3B347CEB5EFBDD3A93
+:108B700056CCD853D6C0FA64783FFAEEAFD73094CB
+:108B8000792C4CF3FEC2E2BB85E0CD18F1FDA16D5E
+:108B90008EAD9BA05E6A0A97938CF9F203E335725F
+:108BA000C2ECA4F250F1F3611CFC5CA89C92EB8C2B
+:108BB000370E409EE6377786A34D4965ACCBEABDBC
+:108BC00009D7D33F3BC1B90D5038D7EABF1AE1F3FB
+:108BD000C10193A9A580BA35239DCEE343B0826B32
+:108BE0000AEE1F578AF2C7E24F80A954431B36157D
+:108BF000E868862384FD957E38E719C4CF83B536AF
+:108C0000AF8AFD4DF37EAA4279EE5536EF7AE8AF92
+:108C1000AC67C45E37F43F7F8EE264D07EE6EC51F1
+:108C20009E5E585FD25AE8270747B8B7AAC2CCD889
+:108C3000D3F89F97323E6180C55C45965F6C9B0977
+:108C4000F2609CA7CBE40050AF4C7BB1CD0EFDDEB3
+:108C5000D312C872A6C1D236DFD7661FC658468661
+:108C6000BF67BA8FB1D99BEFAFB25F01EB7C54B451
+:108C70000F3DD0E6CF63EC5553B04081EFCD9B77ED
+:108C80005499015EEE4239FE2B6DFECB613D57DDFE
+:108C9000B2630DF4BF25ED9FAACC38EFC572FC9EE0
+:108CA000AA8A9130FFCB65F95FEC385F77926C0F41
+:108CB000F39DC298654474FEE62C18DF25CB9F54C3
+:108CC000CD84F13F2E6FAE30C3F8C7D2FEBDAD6884
+:108CD0002C6393E7943BFD50EEDBFC1F5549809FCE
+:108CE0002E06740AE53F6C3E4DF377AB26DE7FE837
+:108CF0008F34BFB2C5A171F85D617F6AAB8275AF79
+:108D0000B6F7BE85E4DAB43664CF4091A4703AB1C8
+:108D10005B9AFDB9003BCBAEF2482E4DA79DD36BBD
+:108D20005E643CEAB181F218288FD794B378B96BAE
+:108D30003D5B124BDE76BAB81EEE4A8CFDBD228D2D
+:108D4000CB03801BE993D483CCBF33865E1997E6AF
+:108D5000A07EF627B290DD15E5B76B8187A7005F8F
+:108D6000323B9FA7EC6790FE48E3729F85AE75216A
+:108D7000DFCCC12E60E9853E258474CD9A93C2A3D1
+:108D8000907658C43C0FF5876AA2F97A5465493544
+:108D9000F49791C8829DF0F4A4332A437B7FA723E4
+:108DA000DADF7B82EE2B0B03DBB1BFCACCEC92D6B1
+:108DB00082683F30EF0DF609BA799BA7B8F0FBDC6B
+:108DC000925B8B34F02CE2EB003AA07630CC33D3BC
+:108DD000810FBA7AC68DD804F3FB06E5AE27BAAE8A
+:108DE000B29EB91606F5B6B8843CF1F2F69E0A2E8C
+:108DF0007FFA6F4D0A6F43FEB4FB4A104FB2DD0D90
+:108E000002EE15F7CEF919D66BE8B1301BD45BD35F
+:108E1000599EC9CEA1171B4E5FC6C213356573C4D8
+:108E20008A72A7E1F4347A5F71EF7B56E453ECC7A2
+:108E30000BEB5A93E0CFF421DC5A63E39FB1169A0F
+:108E400047C3E934169AA87DCFE114EDDF4DDFCF9B
+:108E5000B7AE687F2A0BA79FAB3F2B7D1F80BB5906
+:108E6000C0DD1A7B9E1B04FD20BC4D1AFA9A2FE828
+:108E70000DA49F1FE5E1A16B8AB6A1BC8F8EBB9E9E
+:108E8000FAEF32031ED10EEC49F4A25D5C66E6F205
+:108E9000B3ACC7E50C2951FA907421F1DAE56A2EDA
+:108EA000A7F5562BCE6D0583E775BF9C97D0A79984
+:108EB0008B83EA52CDFC243F40FF5DA2FFD229C440
+:108EC0003FBFE0F4027C7303F22FDA2DB80E5F642B
+:108ED000FCDCE4C1F33F0DE4854FC02387FF5F391D
+:108EE000C2A80724DC06C33FF73CF8CCA7EF653DDA
+:108EF000FBACB8CE86387CFB802B85DA651E8CA453
+:108F000078A1DE19617774754C4CB80CF9628E89C2
+:108F1000A108C375A3BD5A36206FAF7C7706C8DBA6
+:108F2000CC8132C85B2FE26140FE46ECF668FD1F43
+:108F3000B9AE9CBD01E4B5DB06F82F223BD4CE349C
+:108F4000FEC4EE346EBF4D09B29876CBDFB9927590
+:108F500072ECFFAEAD60BF85F599D3B8DE9FD21B32
+:108F600052102F92AF8D72EA13C18F1F8BE7FFBC97
+:108F70009C52CE23A7AA859CE2EFF783998FF53206
+:108F80003222E315D089CBDE9D380AFD99DBB2543D
+:108F9000EF97C057F314DFB067A1DF1ABBF79E64E9
+:108FA0006F944E6A98DDEB40B883D17416F5FE9C41
+:108FB000042AE31FDA25A7DA154E87CC9B5A333EE5
+:108FC000BE1C92F3B82DCB4AE32DBB6F546A503BC5
+:108FD0003FA127AEB5459E658583F95C9661FEABE2
+:108FE0004DAAE6BB83EBB3B1C9FE6FD2D00E555884
+:108FF0002DCDC7602F3904DF19EDA587B16F0FFDA7
+:109000002F62233E3691739AD9660B33DE24847E19
+:109010006A660713FC1A313568E8C0EECAA3792CDA
+:109020005E081F2F01A6B4BF71C9971A3E7A07E7E1
+:10903000437A213209F934C1C57476DE623590A7CE
+:10904000A0DD9A69F3A19C013C111CF62730730244
+:109050008CFB363C116F95EAAD7B2D6EA403C5D712
+:109060004AD0DF2AFC5616417D73EDF424B25BD959
+:1090700099DB4756033C3C499C6EA11FBBE8C74E99
+:109080007422E4DEAFF3C76E43FD24E5A7C4033BBF
+:10909000A3527FF2FB7EA53ACF09E5FD9E8B4A5A8B
+:1090A00015BDFD83F650D47E4ABF6F16F0E3E4AAE7
+:1090B0008E880958A825E4997D27D4AF4CE26B1E11
+:1090C000E9E27A707F41484DC1FE46C13AE0D55B86
+:1090D00089C1A26647141F60E304117F1956783ACC
+:1090E000387FE0739F8BF3D99C748E942DE9BC9CE0
+:1090F00091C2EB1BE9ED49F17D95C2F1BBA99CCB77
+:109100000963BDE92EDEDF6A7BA82A6384D6BE0A26
+:1091100030A44333E37696DF25E8A482C3ABE2DED6
+:10912000C5A9A837BFED999FCA8AA272F41E25E887
+:10913000F441FD7B2C819F52BCE35F5486FE883551
+:109140002DE87441BDF4A4D8FEF24D621EE9E84F4B
+:1091500043BD9F087FC772FA62F2B317BAB83C4B9F
+:10916000C9AA21798E30F4A29FC2FA434E0DFE5255
+:10917000A798747E83E57431B5BF70BBA1248EDDE2
+:1091800050AAB31BE4B846FBE1D37559347FD9FE2E
+:1091900086AC8F2A99A6FE8DACF71EECEFC635B9CA
+:1091A000BA38513CBBE32E011FB4134231E765D5F9
+:1091B000BDFF14FCC49076FC237CFCE8B849C06871
+:1091C000D171FD2EFFDD2EE2A7CB9D872F864702B2
+:1091D000BC5749DF90DC07BDE4DFEA207D5485F20F
+:1091E0005AFA47C8F7CE54A4F1F20DAE491AFD2839
+:1091F000DA19E5D09F453CE3CF4E6EFFA51E94F6ED
+:1092000062A25751A2FA66B0BE127AC62017CF6783
+:109210005F03BD86B4FADFD8EF53AEEF6B5716C6C7
+:10922000A18FD1FF237665D9E541753CCACD2A854A
+:109230008D82C7E4997A3DDFEDE2FE47B72B49A75F
+:10924000E7E72ED6D78B60BD49F84C1A92BFA2D55E
+:10925000438A8AF28EF7D728E8A1E0D807562FC8AC
+:10926000DFFF1276D017E9FEB791AE3624A614A31D
+:109270007ED8FAA78A315B61DEFDEF5B7CDBB0BB99
+:109280005D9C3ECA17AD6935C37B4B87E2B4318D17
+:10929000DE5ADB79C90A58EF0792FEDD7C1D0DEE20
+:1092A0008875248C9BD3C0C7CFEBD8AB9835F22DF3
+:1092B000AF8ED73BE4B2E8F45EAF287F26FD0F16F1
+:1092C0006EA92CC5FA7EF326107D391D0AC583735D
+:1092D0009A01004007393EDEBFC31756961745D79F
+:1092E000D966AA2E42BDD09691E443BD30D61D3C2E
+:1092F0008CF4DF70281241304D3ED46346FBAEC281
+:10930000EDFF0ADFCB757A55670ECAD5A4437C7E84
+:10931000ED067A070B59D0F9362E6F55F60E437CC1
+:10932000A0EC80F132D68F21BD24EB67B8849EC8B3
+:1093300060C117C8AE626D8CF0C5681D19EB47930C
+:109340007D2FF119B5A3C64E403BAAF0818879194B
+:10935000B4DBFD58ECF8BC45E81158074BF744D78F
+:10936000118F2FA41E93F52C71FC6849EF4955B15C
+:10937000ED53D000F4BD7C91FB3A5C77C3062BB370
+:109380002951F857B803E9389F9C8EAD0AC246D2DE
+:10939000D706D7D34A2EACEFF65B985365F1E7DBDF
+:1093A000B0F6C54B5668FC2DE89FF0B1D5CAEAB4BB
+:1093B000FA54FA1317A773FD73A73B3002C76DDC8D
+:1093C000B5D98AF8BD65FBE7566DBC7BD03A8608F7
+:1093D0002FA58EFB290DB5F630AEB37C9199F057D1
+:1093E000BFC11A4679D4B0B33362427BFA6EE6430A
+:1093F0007E6FE8E87C2B07E092DBE09FA47AA3FD78
+:10940000E53684159C4F0610610FF979112BEA6738
+:10941000235DA33D8C76C95B099CDF4F943B420AD8
+:10942000C0EF8425D880F54E6427F942055178BFF6
+:10943000DD39EB1D05583AF9055B049F6DA66D59A2
+:1094400076A8D736CEEA433AAA700767A5037C5CB4
+:10945000E64017B64F7327FB5AA0ADD7C626907EBD
+:109460001E221C261BE861F2DD9C4FFE263D45DADC
+:109470007B13500E2D4D4F96F612C9A7B72C7C1DAD
+:109480001B189FEF3E977F01D1ABD345E3E63444F1
+:1094900014B4F78DE346E9C9BFF842E81BEC3C2B56
+:1094A000CAF57A2167CA176D577EABA1837A3064FB
+:1094B000905E72766E55D00F84EF2D956EAACF6CAC
+:1094C000286776F2FD887AF87E9346AEC875C49018
+:1094D0002FB7217C1D877ADEE4F22542F427E76B63
+:1094E000C4E78FD2B91D77259805F4DE1A1AE385F3
+:1094F000FEDE1A9148FD497E37F2E78F049DE7D4DE
+:109500006E57306EE04EE276A39C9FACF745FA8C26
+:10951000F5389FC9553D0487D5B566C29B9C4FA5BC
+:10952000353012FDAF76D1DFBE859F597BA1FCD0CF
+:10953000AF0E103DAE6E57FCE417B41FB0CEC7F8A7
+:109540005CE8972AC663AFE62609DBF2D201D22394
+:109550005777F138C1EAAE4EF37247944E0B8EED59
+:10956000BB11E96C75878D2528883FBE5E239D82DF
+:109570007C21BA67212BED67817C0C913C65C1028F
+:10958000F447A4FCDD27EC4BE6E0EF9F10F396FDDB
+:1095900046E56602D17BC1B109FBEC00CFD53EC5E3
+:1095A00007A612D8DBBC1EF41F21F9CBD808F4CBD8
+:1095B00064FF46F8FD5AC8D518787E3E3D861E9158
+:1095C0007AB5E0F1190C9F127F660177D9EF9E748E
+:1095D000BE9FB527DD4CFD6F28E7F1EB0D16AE3FC2
+:1095E00036B4D8C3C8D76FA75DF98E520C707259C4
+:1095F00023F8DC6F5AD680DFF7E7F079B499D68F7D
+:1096000069E6FAEBF574C25F0AE3F289CBA3875EE1
+:10961000E4F2A421E4203FB12158B382F61FDC0913
+:109620003EB4F759F04DEBFCE4283D18F1EB7D61B9
+:10963000AFD50BDFAFEEE07C10855B5847B720E776
+:1096400008EFFB5C723F2258807005FFBD05E30CFC
+:10965000D27F4F591C08257B07F36BBAF0DF27092F
+:10966000FFDD32C5FE17F5DFEBD7FE5336965765A3
+:10967000BD4B4FC92FE027EAF8EA84F0DB0E08BCA7
+:10968000FF41D04B7D6907F143FD97CDC4478E2A3A
+:109690002E4F1C87F47290B11F8BF53F40FD54266E
+:1096A000755CA9A23FFCF78AB395C59FF7CD4AF335
+:1096B0003F4F45BC74AAB42FC5CE80555F06704D90
+:1096C000103010F52C6E1EF73EF1142002F9D2DC9A
+:1096D0006C3D97FD7BBE7E59E42305F15D2F607DD7
+:1096E0006267C5D4DF613CF1A954DF2858FAF19DC7
+:1096F000F3FEE677D0FEC4F6E93ED4D3EED600D131
+:109700004FBF27C1877143B70A962DD0434BC71B64
+:109710002997E1BED833974C40B999E7E67C79ECBC
+:1097200045752DC267FD3F3C3F0DBFD7879574B48B
+:109730001B4F3CF5F77F46BD58B7BD093D0DD6FA26
+:10974000CCEB64879BC25BF9FBA752C9BE3CFAC451
+:10975000E66908F7D68E56FA7EEC89AD54DEF70F2F
+:10976000CFEFF94FB43702293EAC77ECC5CD3FFAC5
+:109770004FA4F39A141FAEA32168E6FBB692BE8DE8
+:1097800072AB732FF1A9A497AB51EF229C6AB9FC7D
+:1097900091F4FC85D8575A56E1684379F6C5A6E49A
+:1097A000BA58F144BF582FC65C488ED52A144F6B67
+:1097B00003AAC1B8465B229B82CFA4A2883517C6F4
+:1097C00059B8B8731AD93DA1CF5762FD79BB12D8E9
+:1097D000268ABF61F016EC7F2275C6C683183C0C42
+:1097E0007E32F4BEFD2CD8D71F5B309643FDE9ECEA
+:1097F000FF796DEFFE11E5688DBD77AFC71B7DDF8B
+:1098000026E234509FF44ED99AD8F1D02AB743D0EB
+:109810002DD79B395DD5795E921336DF288D5D3A61
+:10982000EC60F32610432CA7AEE74A5CC75563965D
+:109830004E24BAC0381FEA9F9083FA5F8D714AE0C8
+:10984000B3456ECE4F194EE6BE14C6AF3433B703E0
+:109850009F8C7D642139B283FA05FB83EC2AEFEB00
+:109860000B77A03DB2C512CC9E84FDB409BDB59D59
+:10987000CF1BDA3B71BF14FA735E3A81FAE9B1B8D3
+:10988000A87D88B79FB5BD4589CE1728351FF51629
+:10989000F657EA403D13AA25FC78ADB4AE635825CF
+:1098A0009BD65D7CC3F828FF1AE33B28CF701FF8D6
+:1098B0004E77F96DEE49D1A78CFB18E1F9327E871E
+:1098C000757FEBF6D3933D95AED32BF1EC957D0BE5
+:1098D0004F72FDFBEAE7246F1A918E71FCE0973A14
+:1098E000FDBB5CD2F12B9F131D2FDFC5F56FE3AEDF
+:1098F000122BD2EDF1757EF65B30401BC53EEB16A8
+:10990000A57725C5795E497062FCEEA4D037F50FC6
+:109910007C7E18F74747ECCA26BFFEE42B09B5D872
+:10992000CF7E9389E0B97FDBC55B5B15ED3CB93F2A
+:10993000007630916A23D8A9DC0E5EB119FDB3D54B
+:1099400075CC87FCDF68A09FC65D07885EA41D5CA0
+:10995000F0F8DC15DCFE4CF025A0FF3693DBA30C01
+:10996000EC51AC9F3633DC6225FA2A2943FADAB788
+:1099700070CF46D4E38D339913FBDF32CCFF4A2EF0
+:10998000AD476198CFB2C5D23EC30CEDB7547A9DB6
+:10999000004980DB76B27BD918ABD0732BC85E6EE2
+:1099A000CCBADE477C669407AFB490DDD5E84DA411
+:1099B000F95CBD4BB98DDB230EC6E7AF107D5E1D94
+:1099C000BE2C8CFBCABF17F093703C69E9B911E15A
+:1099D00071F2252044F87EF54C4EAF69333B488E3A
+:1099E000BCFDCA2CD2E3922E935FB6913E77999D2F
+:1099F0008A8FF4DA3C9B16AFED16AE97D2849E297F
+:109A00007C80E33722F82922F440C46DD5C75B9CE3
+:109A1000A162D4BBBF17F8273182F25DC893D52B62
+:109A200022C44F0D3B797F6E9BBFE4760DFDBA2BB0
+:109A3000B85E94717FDC07A88E212F7EE7E6FAB12D
+:109A4000E0F1659BD15EBE0AF08E2A25678C90A35B
+:109A5000401708B79CBA00D1C155EE9B7D6A01ED55
+:109A60001F909FD8DF6265B1E23C47851CF5A407D3
+:109A70004A31DEECC94C263BC7A3969B12B05D89E8
+:109A8000E2DBE6A5FD4DB2F3FA3DD9BE6D3A7E0F9D
+:109A9000949AA0DE918C648EE7F0AFCD73C7231F3C
+:109AA0007AA59FAEB3FB06FBDBDC6E9CD31E2A4679
+:109AB0003F44EE5F4838845B126BB5F2B34FC02170
+:109AC0003C96C7F3C1BE7750FCDA09E3A05FBFED57
+:109AD000B227B85FDF4AE31F74F3784625AC0FED79
+:109AE000364F61600DD7A7C9BE58F0B853E079DF93
+:109AF000C21B4BD0AF6CAC71F890DF1E7A55594643
+:109B0000F48CC141F4B7832B080F0CF080FCC082A9
+:109B1000DC2F6D6C0E8463D37B35F15F23F29F42A3
+:109B2000F44EF176A0F730A777AEFFA4DF8FF2B145
+:109B30003AC67EA8942F8DD6DED148C7921F1AA7A9
+:109B4000F58E46B80D559E9CB400FF23FF001C9077
+:109B50007F24BF24EFE67CB2A9C55B8EDF37553288
+:109B600067AB461F19FD259C27FA9D52AE8F7507DE
+:109B70000A3D1807304536621E8594C38DBBEF1B26
+:109B80001D2BCF4DCA61BB99CB377B3829DCAAA1ED
+:109B90002FDCDB4B9E404FCADB495A1B3B2E52E663
+:109BA000718878FDD0F222325097A3BCD996144622
+:109BB0007925E344C67EC778145D3C46FA2DB8BFCC
+:109BC00080F5E77A38BD547AB89CB85E3CE5FC2550
+:109BD000FD7B4DC1CF319F289EFE92EDFE52712B31
+:109BE000398ED4A346FCCBFD115C4F7551FC7AED48
+:109BF0007BB97C32D2E372C1275E5C2BD47B4EEC06
+:109C0000670DC62FEF87D59A75F96F6DA6CEBA5836
+:109C1000F12FB9BFC11E320F29BF6EEF3A9E47F533
+:109C20009CC8A7658BCDBA7C2A87CFDB82F1D3197C
+:109C3000F6821295C6E571ACE469EC6BD4C3C5BB82
+:109C4000DAC7609E9227A0DF1FC9AC4DD4ED3F64F8
+:109C5000075DBA726E5D8EAEFEB0E611BAEFC3D785
+:109C60008ED37D2F084DD0950BDB2ED5D51FD53E3D
+:109C7000439F8FFBC855BAFA63C37375E54D2D1D1D
+:109C8000B588978B9FBA4ED76E86D9692E01B88E4C
+:109C9000EF58A6CF1333C033F5CF6A4C3A7CD2537A
+:109CA00040789D61D6E70B5FB24B0F0F4C8BC3FE24
+:109CB0008A99E86FDA9109E7CA632D66E66F7A65DB
+:109CC000FB82C1F4C0ECBDBE400C3F53D2B92C1B8B
+:109CD000F7B1A4FCB850FA8B374F497FF1BEC78368
+:109CE000DBBB1EB90FC3E16219804BADEF5C70B1F5
+:109CF0009C0F2E0CE092FCFDE162EC6F7D5223E59F
+:109D0000037F84058D7DDC2BF84896178452B91E9D
+:109D10000ACC3B8F1DCDE3C0411BDF9F347EB7676C
+:109D200070B9361AE640F019225F7F26F070281EBF
+:109D30005FAFFD7A7F26CAEF2A467EB3B3B9E56BE3
+:109D4000D45B4BCC1186F4FF9058CF169117FAC80C
+:109D50003A27F5F3A8D87F7C6C9D97DE3FBE6E0C4A
+:109D60003DC3EB7CF47EDBBA29F4DC0EF61C3E9F8F
+:109D70005C5745CFA7D605A8DED3EB6AE9B9735D7A
+:109D800090CF6B10BE5819D93981F498F1D2A52122
+:109D9000754878626A5E4C7D19B71F75F139F3C852
+:109DA000D71E5A34FB4D0DFF666524BB0F630EE3CF
+:109DB000643619F733CFD7FEBB75B5B3DF1C3574E6
+:109DC0003E92F4C4CEA48F8EC5D741913FF9BB8794
+:109DD000CF6E0A15C5875794CE62C3A9C67E3207D7
+:109DE0009DF562B41934ED0F1AF8B826981AD36E9F
+:109DF000A811F4596BE3FBEF8B0CFCFD92F8FE52BB
+:109E000006D7779FC49133576798A43F6FA1FDC0D1
+:109E1000417CF7932B62C1777F8657C7C78B820639
+:109E2000BC1AFAF9C4D23ECC1783CFCED78F5C9F31
+:109E3000B1DDC3195C6EBDF8FF297F7E725332F924
+:109E40000F08378F66FD9FDC94541B2B2EF35A06A8
+:109E5000DF0705EB9C15B8C8D40F59D1561CC3BCFD
+:109E60007C9F77A413E343320F203EBD9A298E4492
+:109E7000305407C315F0E1B51642FFE68171226642
+:109E80001CC7678AEA59CCA9619A731EEA607A8076
+:109E9000F6212BE5EFF4E6D0BEFF05D213531F1BCE
+:109EA00075AE7DBA41ED2F50CEECF881E58CE473B0
+:109EB00076E6C151B1F4642D8E7D29AC63CBD4FB21
+:109EC00049CE9CA7DF0B855FADDA4BFBD64386DF1F
+:109ED0002EF790E2526BED29C50CFCBAEF12F83365
+:109EE0003483F1F3589F2584D1CE3F20E6098EFFBD
+:109EF00025DCAF6E9E8CCF7FCE0A7C9801ED975902
+:109F0000B99F383EC3FF119613C53EB035D3BA1181
+:109F10009FCCC9D7718958C74693371FD7F1A5E29F
+:109F20001B8B7E8AD314F6E1338545C6F3BCBB7028
+:109F300010FDB3F48B13BDE8DF268E66AC87E2E13B
+:109F4000BE048C9B5993FAFF7124F2FBEB268C30F4
+:109F5000B2E79D7CBECF3F924BFB2AE801A17C2853
+:109F6000C6F730F54D688743FB6B59F018CEEFA864
+:109F7000D31E32C1BC8A677FE1C27CA8E7BB67D031
+:109F80003E42E4293564C5730B3D27FEEE6AE8EFD7
+:109F9000921E0BC59B2F612AC9F37A337B00F926E9
+:109FA0001E3C8FFF75ECFCAE2B32B9DC93795BC69F
+:109FB000EF79E2FBF13879C48E4CAE17647E8C45A4
+:109FC000E6C778FCE7CC8FB118F2632CE600C37DBE
+:109FD00060CB407ECC6246F931D08F363FE6F88CBC
+:109FE000D8F3708B79584E27C5E93785DE1F1F716E
+:109FF000EE755A4E27E8F2ACA3ED1DF43E5E7ECE20
+:10A000007831FEF138F9496307FACF66A1746D3BE8
+:10A010002F9FF7C03879F4DD62C8F3897EE7F93DF8
+:10A020001BD2389DECCD72BA9742D74B59AF05E998
+:10A030007489C36DC1F85180F93AE9DC8ED9D2DF59
+:10A040002BF96E04D6337F8176B609242DDAD94BED
+:10A05000D65ABEE8D5C8A96ABFBECCB0BE46EE6E21
+:10A06000CA6234DFC4716328AFEF14F3A63ACF217C
+:10A070003717DB55BB59B3DE4371EC865B05FC0E2D
+:10A0800065C786DF7599DCEE88771EE2D6CC14DDD5
+:10A0900039BDDB9DE7969708DF60BAB67F231EDCEB
+:10A0A000F4FD7C70F6E0E61AC6D1CA159EBFFF1714
+:10A0B00087779A3857C5CF05580C79E89BB2B8FC1A
+:10A0C0008BCE9BE7A17FE40CDC9E8972D1EC1DADA9
+:10A0D0003D07D065F6274D80E72121778C70D99D0B
+:10A0E000C9ED37E3BABB443E7DA2CA9A3B35F0378F
+:10A0F000AEF73941E7B2FE060BDFBF82BF801DF02D
+:10A100007203E372EFE1CC11222F3CCD8CF270315F
+:10A11000EF82DDE07C8BF693249C07C14FC0DD0805
+:10A12000C700F3DE8879DBE783674796FF6184CB5E
+:10A13000D203895694FF37DAFBF7A38FDADB63FA91
+:10A1400078243C3F778C3CBC9DE1FEDB9897F7C1BF
+:10A1500033658A8FE751B09964EF28A15CF5ECC5AF
+:10A1600043B77736A604C7207F7C29F2AEA53EDA36
+:10A1700098736C34E6CF7B5DE5ABB23C1477F7A700
+:10A18000231DBD66E374F408F404E5A63D63B7A29D
+:10A190009E79302B5887F5641E1FF3F78FC63C84D9
+:10A1A0000B8513FC59908ECE07A7273219E1E75093
+:10A1B0004A6C3AF94D1C3A31F2079D2F2BFDE1F81C
+:10A1C00043C253EE5BC8F9D565713A944F093763C2
+:10A1D000FE505D9649D4E3F9880F660508CE7DC32D
+:10A1E000BE3E9C00733F64C8F792CF93421E9D6FA2
+:10A1F000FD12DE3F941C3E94187B7EA6ACA1E1E7E5
+:10A20000879A5FBD9C5F71ECF965660D0D7E01D686
+:10A21000FF59DA0FA0C700CFF58867B6A19FE4E326
+:10A220002157EC79960D799E41CB0FA16F257DB317
+:10A23000D0D23ADAAFCF4A8CB95FBF00FC27F47FA7
+:10A240008CFBF6727F1EE407ADB7C6DE7F633AE291
+:10A250007DA65877068BA4E17EE61E1BC5FF8DEB1D
+:10A26000BF42D011C0AB82E035A79FE2188746C736
+:10A27000960B15C6FA6D7C9C78E70BAECE528674B1
+:10A28000BE80950629FE576E774454C0C36D021FE9
+:10A29000D6DC553EB40FCBB3DE3B88EB04F89F18F9
+:10A2A00080A7269FEFD8BA779C232DF1E576BDFADB
+:10A2B0004259738CF5043DC11BB3347E50FD53EFFE
+:10A2C0003A476AF0359EF59AF8F9E87E93CE2FCE9C
+:10A2D0006417E41757639F988FE00A903E40FD8013
+:10A2E0007A67E3EEA925884CB433309FA73F3991B4
+:10A2F000E4686BCEA563BC1A7886B2A47DA9C6B10A
+:10A300001BFF7BF9FF51BB49D1D9AFD1FECDF45E24
+:10A31000E2A7DCF18F31F111F4F8EF213DE6F26FA5
+:10A32000C4A7117EA17B2F4FA3F30508BFE9D1FE7F
+:10A3300006F01F07CF1D1E7F3BF6D720CED1283257
+:10A340008F6F205E61761EB647E13D54BC248A784B
+:10A350001AD80D8F211D586D821F9983CE874BBB54
+:10A360008519EC1B3686FBB73764BDF7478CF76C55
+:10A370004CE12CBBF14709E4072E519C565C37D8C1
+:10A380001F9FFE1CEA0759E4D3BBC83F9476469250
+:10A390007A3669E8F394FEF2F9F2A9F7A13D06F3E3
+:10A3A000996172D0FEE63E585F36C88D1956FE2C74
+:10A3B0009F055405FDCD50F3BA7B615EDFB2338952
+:10A3C00057C0F3A78CC361CD81DFB9D01F9D61B6A3
+:10A3D0001CD3CA2D63BCE38DAC6437E151C43BBED2
+:10A3E00065737E7D31C2E57217C1A5F8959999DA3A
+:10A3F00078CB40BC43AC635E682997A7063927E554
+:10A4000099C9CEEF11617EE6756650DC88C33DA424
+:10A41000303394AF90657452A07CB9409282ED6164
+:10A42000DD5788275B16CC423983693C381E787F1C
+:10A4300059F86C9DEAF3E273BA1230F3798479DE4D
+:10A44000216BCEC3FA267BAFCACFE7C10C32B0BDB9
+:10A450001C8F9793457943CDA91B6FF20E8E633005
+:10A460004732D9BD5631AFA34E47C804EF6D8EC8F1
+:10A4700051CA4F154F63BCE33B532884F9D977AADF
+:10A48000619A6F128B447A303E61071098288EF0E3
+:10A4900007E403F06E1A719E09CE5391BB18E6399A
+:10A4A000FA152CA71BF491C7B186F29E3D01B3416A
+:10A4B0000F0515E49BCC5AE37BBD7EB2B343741EFB
+:10A4C000488904B2CEA69F3F5E638CD35866701451
+:10A4D000F7DFC2EDDE8F13793B4917E9D95CFF3610
+:10A4E000BAAC8CF25D32EC76B4DB4F261FC12397F9
+:10A4F000A837DA506FD82D7E8287D41FABBB6E652C
+:10A50000889FC65DD50CE5E86F14BEFF19BA41A15E
+:10A510003C05796F436D117B1F5AB2A6EC1134CE06
+:10A52000FC7782373440B9E63D363E02F54AA6074D
+:10A530002AF17E96D6F1CCB71ECAAD09C1675FC2BB
+:10A54000F51C50A99F26712E963167FD4EE87FEBD2
+:10A5500075C37C9B704915FD1B310FA8FF3EE6C4F7
+:10A56000BC9141747A06D607F87F02CB30EFA6156E
+:10A57000C15FDC01F5B3DF633EAA23BEA32F82785F
+:10A5800053043DE0FBE9F0BE49D04D61B7C2F7EF9F
+:10A59000DD36CA9F600733895FE6DBF9384DDDE5BC
+:10A5A000D74E827915F64C24321E09F531BF093396
+:10A5B0000C787E1D237FD9587F24D6F752B48AE7C2
+:10A5C000D5E458E9FE2326E4DC6403BF5D16A57FCD
+:10A5D000FA5E22CA4D421FE9F804FB01FFDC5FC6A8
+:10A5E000B7F3A99D9BF3838FC93FCEB797B2E81FFE
+:10A5F000F65B111D87E4EF4CF16DFFA2D994D73DB6
+:10A60000D91CD98B7C7D9978968827F2B51DE0B846
+:10A61000D0DCBCDF03EB495BCB7C2D38CA626F2BEF
+:10A62000F657CA022AC2B9CC795F2BCE6FEAE20391
+:10A63000E9485F4F6617123D5D6EF715260089B435
+:10A640004EF1F99CF0AA76B14270995F6B0F63FEF0
+:10A65000DAFC81FB7A82050B806F160615718E3E3F
+:10A6600058B058138F95797D0B6CE047C7DA77CED9
+:10A67000E67A5CB66F12E74EE4F76DD90E9E5F99ED
+:10A680007D655336E557F07C67E0FBDBB22745E597
+:10A69000088C4BF928F398DF82EB9A27F856F2FDE5
+:10A6A0007CFFED64B7CE0FE8EDCFDF281CDFA145BE
+:10A6B0000AD9830B6BCF6D9FB664CBFDDE3C27C5FB
+:10A6C000B799D4479CAEA4DC9E8B7A1CE56D15E847
+:10A6D0006D8D7DBCF8CE3369D42EF3C9D56787471D
+:10A6E000CFB93419CEB9348A732E4DBB5A2C1948C0
+:10A6F000EFE29C4B53F7E71BB5F97D124E83CFB9C0
+:10A70000F4535EE3026B782F9EFF59B00AD608F52A
+:10A71000DF10E722DEC4731113A274947C5D4284BF
+:10A72000E7CDF9297F2FCF99E4C37C9336D304CAB0
+:10A73000176A4B49F669F37336B53457623D99276A
+:10A7400024CFB52C88B31FFC9C906B5B149EAF1577
+:10A750005A6427787B5476507B4EDF5318A03CB95F
+:10A76000A66C2F8DB345C41130AF74223CC3608EEC
+:10A77000717CF1F646F900FD6DC0FE2A0A7D941F3A
+:10A780005391CAF3CC3CE98192DB8AA2FDD674F3E3
+:10A79000BCBC9AC0D76FF1FCDAEA5284A7519E4B39
+:10A7A000FA32CA75A0BF7D488FDF99B8DE89CAF733
+:10A7B000C0A29BA0BFBEF7AD943FC7EEF62B1668B4
+:10A7C000F7E2BB4E1F9EA7DB501EA8AEA4EF663A71
+:10A7D000EF9751CB2236F85EFA9E751BE6EDD5B1A8
+:10A7E000762BF65767D05BAB1C6F5A913F576DB70E
+:10A7F00044E99161BEA1AF10055DC3CE41710F92D6
+:10A800003F522E19E9988DD4CB9F12296F412E709B
+:10A810007DB598EB39F6A482F19FBEE423AAF09FA0
+:10A8200049DE4D9242CA20E72775BF4DF6CA3490E3
+:10A830000FE89F29582EA6FA5406F93906F3472F38
+:10A840006389445F83EC0431AFD28179737B48CA5A
+:10A85000C5F2298CE17D06122F300ED1B3DCAF9BFF
+:10A8600084F7F0C0F33231EE9D267F5144413CB174
+:10A87000B0A910ED8820D93B46FBA7CCDE9C6487AD
+:10A88000F54D61ED241727EF7F93E424E0F92CCAFE
+:10A8900099D798C4B3CF8E72A61213FF547CEAF1F5
+:10A8A00034CBF19019E1342BCB888F9019E13ADB4E
+:10A8B0003B084F744EC01F074F7E2947985E8E1489
+:10A8C000B033FC5CF27D6FDD817EEFF9EC900F3DE3
+:10A8D000C1AC1C929F7A7B245E5E5D418EE382F266
+:10A8E000EAFA2CDC4FB894F5AEDCA90CA68B93FBEE
+:10A8F000D7AA591AFA9174B95BE4D92BAF8BBCDD96
+:10A90000D264D27351BDC8F15F264A97225D69F0C7
+:10A910007FC5AE84880AF45622DA5F8AF43021AA11
+:10A9200017232687D70AE36E547C6D6A0CBC67B880
+:10A93000BCA4FF269AFC2AD953CC978E7806BC4F2C
+:10A9400043784DB177B49A619E87ADBE9FA3BF5245
+:10A95000CEBC84F772837EA970D498913F2BEC46CD
+:10A96000FCFA09EF95CE41EF4DDF07EFC311EF522F
+:10A970007F0CC1FE04BC2FCC89B15F180FEFC1EF73
+:10A98000897723BE25DF7726382B1C18D7ADE3F94E
+:10A99000C413DF1FD98AE58CD50574CEA533CDF756
+:10A9A000067D6FE6DF4B7BFC2ADE9F58B806BE4370
+:10A9B000B9B3205081E5A6B50AC9CB491F055BB1E3
+:10A9C0003CF26EFEBD647DF31B780F595388B7DFF0
+:10A9D0007D7423DD2711DE28DA97B75760B9A98D7A
+:10A9E000B7FF2AD91E42FFBAEC60B815DF8F7D8011
+:10A9F000CF43DA75D3059D752A2FBC41EDDA79BBBB
+:10AA00009BDFB227927C1276DA34B1CEE98FF175F2
+:10AA1000BA7F7B559517E8F0A6FE9005E9E0B0A94E
+:10AA2000A18CE4651C7FAB5C69CFC3E72C900B8CD9
+:10AA3000F00DF43982E79B6E83211ECBE17686CC44
+:10AA4000D3C47CF16A0DBE1ECBE17127592FC3C55B
+:10AA5000785EF1A3C964B7CA3CD2C8CF98827100AE
+:10AA60005C23E9D73879A5B30A9B495FCE1A2EF348
+:10AA7000497BCDCB60DC92B37FB832967FFD8418E2
+:10AA8000F788C87F97EFEBC20526F43F3A9178E844
+:10AA90001EB3DAF7D12EE94C63BA7B423A0B78B990
+:10AAA000F3D19A1FB7E5017C4DCDE6100AFD7C85F8
+:10AAB000EE3DB9A68745525306CF7F96994578DE7D
+:10AAC000039FFFCA56EBB64D1A3B7DBE141B978FF2
+:10AAD000223D5223F024E5C57C812FE0EFDDC8DF65
+:10AAE0000BECCD64172E12F2FD1616A638C52D06F6
+:10AAF000FEAE777CF399C984F1303D1FAF86E970D3
+:10AB0000BDD0FFF82700FFBA47929DA8E75777E826
+:10AB1000EBD53DF2FE416E5FE9F9BC4EF27958CFBC
+:10AB2000E76038703EFFD938DA7F91E7FA12ECFD22
+:10AB30009F855874BD03FADDC07F0978CE6F0CFA8B
+:10AB40002D269E5F28CA72DC53ED5C0F87400F0BE9
+:10AB50003F8744EDA943B3C3480F25827F251F9744
+:10AB6000087D3E485F5719FD9887883F268A928462
+:10AB7000BBD4CFD00FE967796E10F4F2FB7EF2EF11
+:10AB8000C1FFC4798ED3F3CB2605E47341D45F01B2
+:10AB9000BC7D8D7803796CE7718A7686F22CAEDD08
+:10ABA000EF5813D3EE074947FB0083EDFD88CE8EA7
+:10ABB00037E22B9E5D3F80AF04B09792D08F67C481
+:10ABC0001FFF88CF21E475809C76E4C690D3D67DA4
+:10ABD000BC5EFFD6048A17C8F8B8E437258FDBD5EA
+:10ABE000EF66F95DB9B8FF20FA3F74EB2CDAAFFEDF
+:10ABF00086F969BF1AF38D7263E44BE07EF5064D6A
+:10AC00009CF4505AECB8F5F05CCEEF4B72F9BAC632
+:10AC10007BFC5E1CEF8895C7C58F248A670ADF57C7
+:10AC2000B83897C7B9978867B9781E1179D8475C43
+:10AC3000FA78BAAC5721C6F9729DDDBE412357BCE4
+:10AC40003FB335A3BEF2148ABCF5359C5EFB5E496A
+:10AC5000DBAABDAFED9ADCF22508474FA1DF9A8D44
+:10AC6000719657B85E6834F75A31BFE41A77702A84
+:10AC70007E6FF432FF0BD88FB7D73A0FE0DC27F6A0
+:10AC8000E9FB2CDCDFE84BE04F39AF6B72AB97E0B0
+:10AC90007AFB6EED25F93050AEEE25FEBF2637402B
+:10ACA000E3F6CD97DF45F9C7BCCC847F582EF882F8
+:10ACB000E2BC31E2BA83E3B8FAFB679AACB1F7972A
+:10ACC000595EB22E3E7B43378F1BDE68671B73E1F4
+:10ACD000FB92EE4CF21FEA5242A39D14C7FBEFC554
+:10ACE0005DFB86F5D0BA3695F7E73F5A4AFBB814B4
+:10ACF000F759DDFD36C9B9D5924FBAF47C522FF021
+:10AD00007BBEFD0F635C7C08FCB32616FFBC8CFA8F
+:10AD1000C91285FF6D220FA9526DA8C0B8D0A91520
+:10AD20008CCEBFDEF6AE4AF474DBB30ADD0721ED4C
+:10AD3000B3D502BEF1D683E707BC1AF981E707BC99
+:10AD40001AFF0CCF0F68CB787E405B1FCF0F68BF18
+:10AD5000E3F901ED773C3FA02D97B0E5AD18676BA7
+:10AD60006A63CEB0979F27D0B6C7F304DA329E2726
+:10AD7000D0B6C7F304DAF229C6E178EA3195E2F4F5
+:10AD800078AE40DBFEE677276621DD7425F03C32A5
+:10AD900016F2F714015C5608B8E079036D7FC753CB
+:10ADA000AE7C8701DDADE85939079F97EC5AA5EBDA
+:10ADB000AF5E6D203A64ED5CEE36C33F243FD52292
+:10ADC00015E7F1ED2E85A517E0FDE106FDD9BD796A
+:10ADD000238A9E5BC2FAF7F54C13AF2D181C977FA0
+:10ADE0003957E421E6B01C6D9C264A070E5F04D754
+:10ADF000FF91EA8B450725ECA2548ACFBCA362ECF5
+:10AE0000817DC59AB75CAE68E2F70678D8B2F4F4F3
+:10AE100090E0D5D343D2183D3D24FBF4F4903A455D
+:10AE20004F0F69FE71E7846F7A959E3E8CF09D020C
+:10AE3000FF207C27E0CD9018578275629CF72F0584
+:10AE4000DF2F72C5BE8780EFB7ECF20A87973ED737
+:10AE5000D8CBA2F649E93BCDB4496B8C7B4A384A42
+:10AE60003B41C62F2731EEA7DBF1BC6521DA01DCBF
+:10AE70007F43FD8F7C7ED8CAFD36A420949337B1E2
+:10AE800020C9A39B0CFAFF66C74356D4FF83D60B99
+:10AE90001617DE1B685C2FDA514C134F32EA7FA580
+:10AEA0005B892417E372BBA55C0E9E2563C7AF0CBC
+:10AEB000455EFCDEE1B7E579681C662FD3C57B6390
+:10AEC000DA73721E122E727C1B6B56B3909EC718DB
+:10AED000ED2FBDBF2CFD6BEA54138F96FEB1F44FDE
+:10AEE0008C7056871790DD35D129FDE29EEBF1BDC0
+:10AEF000F4878D7EE8F9F6A5E68594DE9F1744ED8C
+:10AF0000C92BC4739E8817C1B27EFB6FD0F872C57F
+:10AF10003B0CC79BBBFB220FD2CB46A59919E6770A
+:10AF2000F055E84735F5A7F3F84B50B75FF5B6D2C3
+:10AF30004BF35EC0FCF7E0B351C4D31ABBDEA67D71
+:10AF4000D4C62E1E2F60BBF47831DAFBAB5887B520
+:10AF500040196CEF37B01EEACF68DF0FA293F3E819
+:10AF6000F18E3C79DF16CF1760422ED50978C5F3F4
+:10AF70000BCC08E0A9D1FB3B811FE6E54D8AE6D169
+:10AF800066B8C08F51310FC36B8D9527C5F0721510
+:10AF9000B049973B6A484E2C6F1B1497B0123FB5CF
+:10AFA0009F7B7DD20EB81F7C377C96E67979DC20BA
+:10AFB00071CE3B7EFC5CDA93AF3DFFD164E5E70EDA
+:10AFC00059B3FE7CFEDA3C933C3FA50E65FD83E160
+:10AFD000FAFDF2F265FE01C0EF2E2DFCE43E825C2C
+:10AFE000CFEF27F53C89F1433579A61DFD5AAF2BEC
+:10AFF000D882F5871DEC3DACA03C7378293FE4E492
+:10B00000AEA31FA3FF2ED7C758EF16BCDFB66E97AF
+:10B010004AFE60DDAE37C82E8AEFEFB50FDCA32005
+:10B02000F6377E126B5E32AFB9522D4AEDD5D8E9B4
+:10B030004B851F307978E0216C57FA615E0ACED7D4
+:10B0400032A283EEC5EABF83DBC16E95CD44F881A1
+:10B05000DEE37ADF61A67D077752484D413B6E29DA
+:10B06000E3F7D0F99A7D482AEAB0228AD366DCA1B8
+:10B0700006D0FEFE74CDF2343CAF9C91BC22AD10E4
+:10B080009ED36DFC5E9A0CC514E0E74E97A5E13D9A
+:10B090002037D8F8BE7CC15F27450A81DF5EB7F252
+:10B0A000FB46DD4941BABFA03F4DA5F91C5B074BEC
+:10B0B0001B85FB1EDF4CC47B0772CE3826E07CB2BA
+:10B0C000C5BD163FCAE3F7DC1C7FF6BB89E8AFAA13
+:10B0D000671D74BE5DD29FBB30B6BFB242C0A3D164
+:10B0E000C3F3DE4F0AFBF190D86F9579F06BC43E45
+:10B0F000E0A1D103F78379302FA431C19FBA10E3C7
+:10B10000110754CA6BFFC6E94F4D23BB99E7B3AF94
+:10B1100011F6C34991F7B966F68C4CF42FE2E54B72
+:10B120001FC8E376EF0F755FA5CC3F8D0B873433D7
+:10B13000335F42F72E05CE55EFD53FAB31E1795A5B
+:10B140007C8F9737DF97A7E8F2E21B312F1E5EADA9
+:10B1500079A53C939D235FBA11EF23D7E4D7A09F35
+:10B1600086EB6BC4FBC8E99ED213744F07F683F7D6
+:10B17000869DEFDEC815621E8D984F9EAE7DCFF97D
+:10B1800039DABF9BBE3F2DE0F6F43BA6AA6D31E64F
+:10B1900099378CCBA7711E7300F7252F8EF07B3F5C
+:10B1A000E3D593E7B8E3CDAB6B46EF8D386FCCCFEB
+:10B1B0008C355ECA304E2772BE5DAEDE9501BE9FF5
+:10B1C00037BA3A595376F6E7CFD5C8D7D9023F5D9B
+:10B1D00057F5E6D37D00B3B9FF1A0FCF65E66605D4
+:10B1E000E190E00A06D11E91F715E37DC63CCF231E
+:10B1F000744E7C47E1ACEACE1F0C86B395BECBFE05
+:10B20000A4DC39FA884A72E7E807821F99DFA19423
+:10B21000A1BEE27C7594F1B8EED176FEFB1FCB8225
+:10B22000A02B407E2CDD5E3F070F1FAFDC3171236A
+:10B230008A7F7C7F37C89FA5598C4D83E7B20DFA72
+:10B24000FDB16FD903A4E7563C60D467012BCAD97E
+:10B25000950FE9EBD7B107BE46FBA0CE60F76608B5
+:10B26000BD6BB47F670C13F66F192BBB90734E8FB9
+:10B2700030FFEC61A4FFF97EDB24B19F6EACFFBC14
+:10B2800097D3C36D3BFE60C59F048AD7EF319017FB
+:10B2900023A1DF13EB9CF45C32CC5F330CDA350D69
+:10B2A0000B2EC471FA0E70389F6A38B592E2D2B58F
+:10B2B000DC0EB0E1252BF09FB6EBEDE447DF8BF71A
+:10B2C0008C019C6D366E5F48BB4A556F57F1275B0A
+:10B2D000A6FE6E451AAECFFDCCAC2AF43F3CCF247F
+:10B2E000F9111F9BCAFD2528BF37553B689F78ABD6
+:10B2F00089DF4368B7F1FDB9F0D353F7613878645B
+:10B30000C7E619E86738BBF746302ED166E2FBAFD7
+:10B310006DD398B8C79A8FD7D45DDD89F3CAAF01D2
+:10B32000790FFD6D2AF0973835FD33612F350A5CB2
+:10B33000F4BD76D14FF1DEAB9FBF43E62AAC730478
+:10B34000C5BFC6314E3732BF847E1B43132F3A012F
+:10B35000FA8769CE3F8FEB50229614BA5F8FE2D8FE
+:10B360000DEB2319D7A3FEFC25DFAF95F373BF9E2A
+:10B370003D03E3FD529F5E8FF96D18071676EF22AD
+:10B3800026FFF87E41ADA0EB45C2DEBD3E89C37904
+:10B3900019F3D1F9ABEBEC2C05E3CBD757744CA2E6
+:10B3A000FBAFEB2D6968AFC8B8773CBCC78BCF3417
+:10B3B0003E99CCEFCB51FA476327C73006521ACDDE
+:10B3C000B737F6B36398E0E7D1C24E1BC9FCB8CFDC
+:10B3D000D2B8E722CAC7B725F27D35906F76C4EBA5
+:10B3E0007ED4E7B0EE5B5E4D88F07DE3B0B81787A2
+:10B3F00085683F664F26ED2BB80BFDB4EF7ED2D2A9
+:10B400009B4FF200E49702BA73CFB04FAE31E3FD29
+:10B410002039604741F9F82F0E5F83BFCFD238A2A1
+:10B420007725DE179EFEF8595E1ED77B18CBC31E0C
+:10B430004FBC96CA137A57AA509EF278D6B5D41E3E
+:10B440001D2820ACCAC7875F8BE7FC8E89F825F3DF
+:10B45000F5D23D418DBB2F3269E38325F95C4E1F48
+:10B460004BE0F58E15B0257311DE637A476B7F379D
+:10B47000C1932FED526E97C975CA762C2B76FFEFCC
+:10B480000B3D708BB8DF677A126B4BE0FB1521B474
+:10B49000AFDEECBE88E0F2C2309780572FDDDB28AC
+:10B4A000FB319EEF97E3AE42BD8D72DDA23F4FF4BC
+:10B4B0001BA12F609C0D344E91BF04EFE5699C9B4E
+:10B4C000578278037C9905BECCDC0FDC4A78C67EB7
+:10B4D000D38A498F4CC43CB137CF40FD82E8BC8D44
+:10B4E000F471588C734B2BDF67EA4F2B243A9A9EEA
+:10B4F000C4ED3F560AF003393645C0AD245F9CE3E6
+:10B5000019C043A642FDB70AF8E5F1FA17BADED32F
+:10B510003FD07A3578F263DEF19BBBC6129EA60C53
+:10B52000D0C1665D3FC75A0CEDA6F0BC94465721CA
+:10B53000B5BB57DCB32FEF2DC67605D06E7A45FF2D
+:10B5400044E407796F1B0B4D2367BD41488B817B1A
+:10B55000D83A787E0A1BE9E7F711CD9D532AD6E742
+:10B5600014EB736AEFA51BE0C38FFAF36B34F75249
+:10B57000CBF703701FE8AF6882E84FC7CFB1FA433B
+:10B58000BE88878F71F97F617CC8791AE0390067BE
+:10B59000C3FC243C918FA95D919E9FE43C87E59B71
+:10B5A00084BF6DE0E782EF399EC8EF5FFD37221F51
+:10B5B000D2ABA7E7D55D0526DC3F95EDDA3A5A0216
+:10B5C00028E765BCDBD6551D42FDD7D45D4E799B7F
+:10B5D000AB7FF5ECCB2168BFEAF987533099F6A829
+:10B5E000B93D03EDDC861DF7A4F871BFC41C4A41C8
+:10B5F000F97934AC56C53A0F181278907654A3D026
+:10B6000037C79EBEFF1A84C77FECB038518F363DD6
+:10B61000658BD8280E720BD95150FE9C97EFFD1AFE
+:10B62000FDD2A65D7A3B69D53F3C9CE1257A0AE5CF
+:10B630009AF08C0B8BE43278366EB7F8226E1E4F80
+:10B6400084615813EBDF88F333B6C7799C06BC37A7
+:10B6500075A84BF13CAFF13B4812B2C39ABAEE2742
+:10B66000BBAB491B67003CD4C5B1BB6ECDD7E75B14
+:10B670004BB8B0B087EC9AD65FFEACF87307DEA784
+:10B68000F94F294A91565FAE27389DEA58FEF7BB1D
+:10B69000BDF1F5EA49B40B6CDA761CAFDE5D0AED5C
+:10B6A00049B06EFE6CB04452D0CF6FD86AF181E6DB
+:10B6B000650DCF3EF124EE87B04F6C74FF41FDB3B2
+:10B6C000FB3FBE14CAF59D16F71C3E7D879211C53F
+:10B6D0004F9397DB27121FAB5EDC4FF70CE27BB476
+:10B6E0006B255EEA3BF75AD9F8C1F0ABE8D82B7E60
+:10B6F00077C1809F8ECFAFA4FB3C7FF99D15E9FAFF
+:10B70000E81E8565160C6E5FB7757F0AD21FC209E9
+:10B71000FD4B89A701BC0DC257E49ADDA5548FE209
+:10B720001AF1F036379FF178D0AF9E7D0E7F07B0CB
+:10B73000EE37361FAEBFEEB9DB53701D5F999B39F4
+:10B740007DFFE29E0C3F8C5B67096538E9C9DFD756
+:10B750003D7E07D1DDCD07EEC8E0BFA7E1CF364D76
+:10B76000A17566E3FA6E7A6C3EAD6F250B12DDD5DE
+:10B77000FD82C727BE15BFC760C4E769C11F5F6DE3
+:10B78000B3E18F64B0AF30111DF3083F50459EEF19
+:10B79000AD4C7B8F0558DC54FE56C407DE1FD0032A
+:10B7A000CCCE3471D9A6EDF7F6207E8E0DF367E28C
+:10B7B000BE1AC02124E0A5E0FDBAEA81CA4C8E1F62
+:10B7C000E635CBB832D8DF15F81EEBF758FC09C5C3
+:10B7D000BA7662BF9E8F2FE31330EF44DCF7FB2A6B
+:10B7E00023F6B9ADD1C31521DF580FD3D2573C7E14
+:10B7F000DF7E1FD1D5371F71BE690C5757D1F71E99
+:10B800004B048F163786F7D628240F6CBAFB9F0699
+:10B81000E862BB45F0B3FE3BCCD3AC68E1BB87E745
+:10B82000D5AE7CC8A6BB0F214A37D6E8FB82287F5D
+:10B830004A3FEA66C1FFC6F51AE5C11F0CF2803D1A
+:10B84000E619D2BD320D96F0938F22FF02BFA29F60
+:10B85000D9F0AC85FCFCE33BDFF8F83AA0F3E31D3C
+:10B86000926FF572D5C8B7752F4C62B1F8F6B8C3B0
+:10B87000C762F22DBC8FC9B78EE83E8D97FD7072FE
+:10B88000F5E63872356FB8F11C4B512AE6BA1F7BCA
+:10B89000BA7E38C5050C7095FEAC515EBE9CEF8D2E
+:10B8A000292F195E41A581A3849FA4C755CFACA6BB
+:10B8B0007106E856D2A5A4DB01BA1C945FA983A344
+:10B8C000F1FB17288F2645F16E590F7E0ADAB1AFCA
+:10B8D000A9F43B287D30978D00F7BE9D05B40F7A03
+:10B8E0008FB0F3FB9CFD2918D7BB47F815FD184F07
+:10B8F0004C8DBEEF4F10790381FE94348D5DF47949
+:10B90000B79A82765C6F38F6EFC9CA7B2A7BE3FC74
+:10B91000DEAC3CBF54A93AF2D7629CB69DEF4FAE65
+:10B9200068599882F18CBEEE42FA3DA19BDE057FFC
+:10B9300017E6DB27E39A21BF39BB2C7ABFE9111642
+:10B94000A2FDCAE5DDF5B45F688C83AC74D4A4E2D3
+:10B950007EA0310E7233E641611EF263FAF7AB301E
+:10B960003E827832D05310E9297B303DAD1C2EF653
+:10B970005F4B58896EFF55C8B54AB5E8A7689FF474
+:10B9800081DF8EF120A616FD1AF5E9B7E8C723037B
+:10B99000843C44A7F5C12332CF8AE85AD29DD17F97
+:10B9A000373E4FBCF469199E076A78F9DF8A7F0E2B
+:10B9B000CF132F7F32FA552CFFEA5FF3FF8D0DAEC8
+:10B9C0005FB1E78FE4AFF4EDB1D17CFAF6BC9D7FB7
+:10B9D000179677DB7C38DFBEF536FE7BD07B92E9AD
+:10B9E000DEE9BE613CCED6FADA77C5BDA4A7361033
+:10B9F000DEFE6E38BF2FF654F77F7D86F7AB9EEAEA
+:10BA0000B67931EED0B42789FCF0A6DD09744F7CFD
+:10BA1000DF6BDF9569E345FFDDF5348AF3167DC9F9
+:10BA2000AC16F35BFAD2B8BFD6F4EAD4275A0AD0E0
+:10BA30002EDD4BF71657BCFEA762943F7D2F70BBDF
+:10BA400002FCF3C77113F117C3BB7F6A998AE78DB4
+:10BA500018F9D553BD7FBA36E48805170E873E80A6
+:10BA600003AE0BE042F775C78347D7707E0FFFFF29
+:10BA70003E787C4DFE4243F764E2A3285C14FEFB53
+:10BA800023DDC961BB42EBE7EFF77C578C76D2F13F
+:10BA90008E16D2FBE75BF787FF6BE9E0FBAE5B89B5
+:10BAA0000C65DDA7FED7AE9BD3FFDAE15C3F19F949
+:10BAB00060309DFFEAAFA9FC5CB28FE66BE0FFFF50
+:10BAC00007ABA359F3008000000000001F8B0800A3
+:10BAD00000000000000BCD3C0B7814D5B9FFECCC76
+:10BAE0003E926CC22604084260F2244A1E0B791072
+:10BAF0001EA99B842008E206A4A2222EF8E015923B
+:10BB000008B6C66ACD622202F5B6516CAF6DD16F30
+:10BB10004141DADA6B8A41B1025D10115AAAAB8257
+:10BB2000A246BA52AB50031B41052ABDDEFFFFCF30
+:10BB30004CB233243CFCAEDFD7E423C733E7CC3927
+:10BB4000FFFB75CE18498599ADB9004DDB4EE587F1
+:10BB5000B1056806280648526D00FD004E6CFDFADE
+:10BB600090944CAD5D853480BAED710045D8FE31BE
+:10BB70002600124064DBA9129F13E01BFAB912A041
+:10BB8000A3119718D6DD37B71D9B3F2CB917A7D443
+:10BB9000BCF041FEAFB1ED78E1BDEC97A9FFE2BB8F
+:10BBA000433EC0B6D606BE565C2F120F3337213C3B
+:10BBB0009144F000EE5FF7F2E8A796E1FE8BDB3EE2
+:10BBC0009F4DFBD76C1D0532F62BFFF4EFFC30CDFB
+:10BBD000DF2479C4F3F88003E1AADC7E463CDF7EF3
+:10BBE0002A1FB0FD6C93149413B0FF807D7E80D625
+:10BBF000ED05EF118477F17F22DE3B6CB7E278C36D
+:10BC00005095E1EBC67B870DF208DFBDB3697E641A
+:10BC10007BBCCB9E46F0FD7B0844E17F21BCBDFF91
+:10BC2000B1FC3E3FDE007E86DB2A7B1DE908DFC3D8
+:10BC3000100CA9D83E0830B1D5792E3C3FA6C16280
+:10BC40007A0F42D01F4006F123272F9C0209D4AE61
+:10BC5000FA5CCEA7F7A74D4C4338FCAAC5BD5EA53C
+:10BC60001916A6C38AC1EEC02A840B14EFFCB5D8FE
+:10BC7000B70EAD71AFE215EE042801F881435BAF5A
+:10BC8000FF948912AED7B40CE1C2759AFA595C4D93
+:10BC9000B88EA25A82F67C6E3FA2F6A1FE57EFA1A3
+:10BCA0007D15A70D82DABBDFE03F27603F47EBE35E
+:10BCB0007EB199517DFC17033B5D0AEE1FE35620D0
+:10BCC0008028D921EA7D9C7F93EA62BAC442C0EF02
+:10BCD000725E3A9D7E4F83FD7AA793993E3ADDCE00
+:10BCE000A1138083DE57E8BF08FFE45521D2430546
+:10BCF000147F58E0237D23113DDD290E5CCFDAE768
+:10BD00000EF72A899FAB4A89F69E85FE2C31D01703
+:10BD1000E9E789C9EFA673D47A8CBF99CE974A5FB9
+:10BD20009D2F31308DF91C33D8E90E20FC0FAA82EB
+:10BD3000EE0F22DD25A99BBE3ADDCC7CF093EC14FE
+:10BD400077D3BFBB1DE7FA64383312BE41E2FA2B4A
+:10BD500020A71ED7A992C785FDB8FE89D238B79D06
+:10BD6000F44582A03412DBF2FE15807874A4DA1454
+:10BD70006ACB3A11A72878AF3CED00250ABF72487C
+:10BD800034F43B52B3F9FD4AC740C37B1D034B1D3E
+:10BD9000F4BCCA956698FF464C423E14D07B1326ED
+:10BDA000D2F85529971BDE9B7AB863CD1C6CAF95F2
+:10BDB000C245241C1D7B675510BD26A9230CF3B674
+:10BDC000A059217DEEAC9203EB901ED552B07F3E80
+:10BDD000D26D72CE68237C128C273C6B2C285A388B
+:10BDE000EF1A77B961FCDAD2498675AB3DD5867E0C
+:10BDF0004DC357A0F40518DB70169442B4E3C15646
+:10BE0000C3FB857BB618E627EC03391EDB11FBD597
+:10BE1000266A0BDB434924BEB6BE0EBFA50F8A704F
+:10BE2000D85B89E840C991FA57A86D70203DF0F9B8
+:10BE3000A918D122BF58CEFD8762024D08EF294BC9
+:10BE4000C04774B85B0EE4501B3BE88E7C48073853
+:10BE50009AF2B0DC87E0075FA78A7230FA8B401352
+:10BE6000F5AF3CDB2AFBC80E6F94FDB602E2FB94F3
+:10BE7000B8BF92DD6D9580F85EE3B47802E4B792C6
+:10BE80005AF39746C9D7673F845BBCB9E7EAEB8BA7
+:10BE900059E596345CBF39C5D3B283EC66C587B328
+:10BEA000E5F473E7814BE90CEB7449A7F7BC4583D4
+:10BEB000511EE5F8F10EB2EBB19532E30557590387
+:10BEC000EB719DE516778CA6FCEC5F5D13AC6B49BE
+:10BED000AFD7A409FB10FB175025843FB6AF4FCE58
+:10BEE000A3F77E26C17AE8DEEFD652603CB2D22CB0
+:10BEF000420F1457BF9BF3E8FD787EBFA454D011C6
+:10BF0000A6580259B864C241F76E2BF657E7EC7792
+:10BF10009119689B72D82F235DDA0E86CA24D4A5A6
+:10BF2000010F979FCC14F3210BFB6D39E3E3F2D89B
+:10BF30008FE558C8CE2C41B347766647D93339E4EC
+:10BF400027965C7EC500E8C1BEE96DC26909D4C20E
+:10BF5000EEFE9A3495E14A50C2407A9D705AE171E2
+:10BF600068C8B690FDD1D74F98A5BEBB94E0D86302
+:10BF7000852CDA5EF12C223C565DD1AEAE623C04DB
+:10BF8000DE00E1142FA2FA4FF4932A315609A7DC00
+:10BF90001C7F2E1CFFDC589CA8221E7DCBDD896EE9
+:10BFA0006A7F8F441FC374F7131D7E4A7F2EA3DE62
+:10BFB000DAD0781CDF4836518C0701E57A954D1BA5
+:10BFC000279382FDBE9236EE5FEB1D4F7C958DF37D
+:10BFD0000BD2BBE67B1C29DDEB7BD7AE0D35F748DA
+:10BFE0004F3BFBE55513AC01BB7431748DBB005D59
+:10BFF00013045DCFA2F5C77DEE72887D3E96D421F5
+:10C00000246FAB2D68053200F6BB7CD7935CC7CAA2
+:10C01000C13C7A3E37C133A00CE5AFCDE619720FB3
+:10C02000D9956D31EE75F85EF59D9F3DDE407A3D08
+:10C03000F59F39CD24378A276E24EE53E7FA8AED2F
+:10C0400041959CDB87E29D2E3A923CE39E3FB5747E
+:10C05000F7C93E2474D3D59389E3ABA2E8EC709082
+:10C06000FD12FD47D3DABC4CA7DB1C4CA7A59A4EAA
+:10C070003527428B05F5E1A46BC3F7491E4E6EB41C
+:10C0800002C54D6D3448FE32C7C17A05C9E1946AD4
+:10C09000D483BC372D5E8ACBDA513E3C241FF5D9C0
+:10C0A00086F54E8E7B37290FDF3B99AC24117D1628
+:10C0B000866D4CB79B1508DAD15EB625DF5659CE92
+:10C0C000FAA1F278ABB6CE6B599EFBD2D8EF8C7743
+:10C0D0007D8278499E31F237C37BE71779D04F7460
+:10C0E000FB8874AE2334937A9783E6724780E2CC60
+:10C0F000BAD265B9E41F9624660F00C4A36EBCC40F
+:10C10000FEB6AEE10BA6BBBEBE725A06B56F777F18
+:10C110007C86CAF640513C2C0FCA691B8FD7349CD1
+:10C12000643B8EE0A491DE742C13F6AEC50AB754BE
+:10C13000635BF3BFF22DD538BF06430CF617B0D3BF
+:10C14000B624CA1E42EBE75D76BF0079B77ACA5BB8
+:10C15000B16467AB25D70C401C8EA6BBAA95D1D87D
+:10C160008F71CD90B0DFB6EE8C97FBA9AE1916ECAF
+:10C17000EF4ABB498C0F74FDDCE206F87CDD5DA262
+:10C180009FE63A40FD0FD31EA95606623F5EC8C126
+:10C190006FD26AABFDB9245F4EA6CB891571AC1F77
+:10C1A000BDD1795EC3CB06BA9C332E4BB778C96E2E
+:10C1B000CC1476F1D8CA416B391ECA0C65D39E5B8C
+:10C1C000D344FCDA1F79538AFF5E45BD77201D9268
+:10C1D00033C063C1F9C92FA23FA2F91F878610FDA2
+:10C1E000E6BD181394901F8B9F78C546FE68AEACD1
+:10C1F00066935EBD3FCCB793E4E3787C88FBF31A8B
+:10C20000B6335C29592E61A75D9DB95E94CFF9D0F4
+:10C2100062A3F1F9A01C26BF614161A6B866A173B3
+:10C22000978DE2B2854F5B0F87A3FCEA22081F229D
+:10C230003DAD79D67A381CE57F81DE8F92AFC3168B
+:10C240000187A2D163AE1C9A6D13701D20B816270A
+:10C25000617C2F93BB08F5F7715C5493C379494A0D
+:10C260002C90DC2DBFECFD7C5F0F7EB0B511FD3E48
+:10C27000AADCA6C62DDCAEC135C9EE0C50C23637DD
+:10C28000AE53ABD9E592D0611B44BD7F42A36B9FF7
+:10C290002D128FEBF6A27B3C5ED025D733C2827085
+:10C2A0002C9EB66F1CF145E7E79571D01A93C47CBC
+:10C2B000716B7C71135F74FA233D0B157C6FD7593A
+:10C2C0007C2FAD27B9D0E92FE06D8B15F6A27373E3
+:10C2D0000CC74D66F8E3D205BC3A1E43D3CF0FFF1F
+:10C2E000D0F4EF06FEA1E9428FCD78E87AAC3FD7D3
+:10C2F000F5D88CB70EF7A5CB59C8763172A6DB9965
+:10C300005AF0E5D0FABA5DD1E9ACC3A9D3AB8DF24E
+:10C31000A11EE0541A5E32E0A3842A28898071E9C4
+:10C32000E9C28EB54E02E283D2B095E75D2A3EBAED
+:10C33000BDED0D2FDDCE9AF1D3EDAD8EA76E7775E5
+:10C340007CCBD090B03DC4349EF2AC2B4FFB0C7133
+:10C3500070392C30C4C9958E3B0DFD2AD73D86F926
+:10C3600057A52C338C4F52571AC627E73C62E85F1B
+:10C37000E3FEA5298E5F6B8AE37F63181F170E719A
+:10C38000DCFD7AE344509047DF3BD2C9F177B0D16E
+:10C39000C5FD9D8D29DCEE6A5459BF7737E670BB29
+:10C3A000A7D1CDCFFFDC58CAEDBE460FB7A1462FAF
+:10C3B000B766BB30F5F9EB15CA574A432D9564CAE9
+:10C3C0007764F87E928EF47BC312688A473A8D6A4E
+:10C3D00017F139CC37FBE35387EE25BFEEB2B9C96D
+:10C3E0001F36EF182DA93DC47309E8EF3C51F292B6
+:10C3F00030250C1E8A7BD03DF7245F2DE916964729
+:10C4000032FB807A37D301D664D4B79933257713BA
+:10C41000F0733F24711BF4E1F85405FCE4FFAB9D7D
+:10C420004AD09EC0A0791D08E70C0126D8699CFC63
+:10C4300077725F85E2D6EBE821C22B7B64F81E3E63
+:10C440009F51FA97339437DFE86CB5929CDCB0E7E4
+:10C450008163F7E23834FB8B493FBAE206FFFB9673
+:10C460004B891B5A28AE443A462477C843F14EA262
+:10C47000E28ECE07F4F6B674910F4C6DF2CB0948FC
+:10C48000CFCE3781E3385D1F11BF1504BFAE17D57E
+:10C490002E25382C81FCFD239534BF66BFCA74D18C
+:10C4A000F542D7033D0FD4F5A04A7EB689E69F3802
+:10C4B000089C4F8FEAF01D799EF034C59DA59D2DF7
+:10C4C0009594975D286F1C73BAF5159AB7BDD1C7BF
+:10C4D00072B4B57126B7C1C6F99A7CD6737F57631B
+:10C4E00003F77737FAB9DDD3B84293CF161EDFD7FB
+:10C4F000F838F75F6F0C6872BA919F8FCF10FEF714
+:10C500008B50E50092BF17D3451D071CE59C478063
+:10C5100022DA8B95939A9497453C65920FB35CE829
+:10C52000F200683724A4D78DE867C93FDC04FEBC5D
+:10C5300039D8CE9CD7621D2B7D7BB958E86CE6F8C4
+:10C54000C36C0F174090EDDDB9F65DC4FF17B2EF75
+:10C5500032E6ABE4AF74FBB718C2BC9E5DBED34DF0
+:10C56000F594EFCEAFB834BF0273687E57DE1DDBA3
+:10C570003E5BB65C38EF2E1A2CF8AAE7DD183F02B6
+:10C58000F9E54840E6B87A7E5A4B02E7DDA59D09F9
+:10C5900014072CD826333F30CF540622DFE6697CBF
+:10C5A000EB80E03BC49779E3E6715D6EFE1A233EB3
+:10C5B0000B9DD7F509AA3DC6693DE2590B0F7F4E89
+:10C5C000F5B95A8D5EFC1CE16968BF61D2AEA879ED
+:10C5D0003119F1C99FC49142C128A207C2EF0E923E
+:10C5E0009EED9759CF7A938BE3989F909C9F6A9C7E
+:10C5F000396917CAFDF1B38D9C7F25653CF2887FB0
+:10C60000DC77C7AFB559DEA1199C0F856DA43F3A01
+:10C61000FF96938D44B8975738029468478A5D0A0D
+:10C62000ED1F913C723CF1E323702F43FA956F7D2F
+:10C63000ED20E947B9C3C9E708884447343F47EFCD
+:10C64000F7353971DEA87D1E99C2F7E25DE1269AC1
+:10C65000A6FB1BDDFF8CEDE8947D5C17C8643D02F2
+:10C66000CC25BEC9B8783D32E79B4D946FA2413AC4
+:10C67000E99CC0F09E0C829B9E77D7B544BD69ECC7
+:10C68000598F9C80F02DD7F2C3D11F7B198E6A87FA
+:10C69000CA7268D7F2497B8A053C517474D97C1BF5
+:10C6A000A9FE097F8CE13AAF19BEC919C28EAB4908
+:10C6B000DEC94C5FA79A4D794395DCB1E1D7240FD1
+:10C6C0006D716E3BBE67B6B7BA7DEB2D6EAF739DD5
+:10C6D000EC318ED4DB3A8B38371859A91652FE4705
+:10C6E000F125E5857A9E689EEFCBAA989DD18FEBC8
+:10C6F000AB210FC1E5B29C574EEB1A3E3F6F9EA691
+:10C70000EF5FB7ADD83537AA0EB226433F5F505C16
+:10C710009F38BAF976B1FC2DEB9C69F03FFFE9F147
+:10C72000DA540C7324D4A13C2920E20810F1C42C63
+:10C7300008713B1B3AB9F5A124513B17DCDCDE063E
+:10C740005E6EBFCEF4AD26B989583BFB931E1F7BAE
+:10C75000E1EB5C928B63DF1BEB4A53BBFDABEE6FEF
+:10C760002FD5AFC6D2F9520FF2B041935BDD6EF711
+:10C77000CA1F93DD8E8C40FB807046368B73B148A8
+:10C780007C6C80CE0174FB007E63BCA8DB8BC2593D
+:10C79000EE37B85EB84FE6BAA5D97E5429228F0786
+:10C7A000C59D43F5517DFF260BCC2739DB88ED1F56
+:10C7B000108F3EB3C28A1A85CF760D8FF21BC60347
+:10C7C000E52F535D223FAC724032E57370F664EEA4
+:10C7D0000C340453291E45791E95E4F913D1DBFF6F
+:10C7E000D0B8443E7F20FB3314F9F79138B7810568
+:10C7F00052200BE9B1A54DF4F36E4F64FC6E82201C
+:10C80000F3F166085B09FF5B00D8EECE0195DB5BB8
+:10C81000C1C3FCC495E3F2D10EDDDEA68C5C857845
+:10C82000162475A6937EE68D7E2F4942B8F229FE26
+:10C8300075726D6605C5293A1E964C81C765999E2D
+:10C84000B709BE82A4D0AAD514176EB600C5859FBD
+:10C850008EBEE70E88F2AB2559150769DE73923854
+:10C860002FF46FB38BBA1A74F6F746C5E35F6756B9
+:10C870001E22BDFF07C1C6F9EF2A3E47AA7609DA94
+:10C88000C3F87E4C037C6F8837AF27FDF4B37D2C53
+:10C89000205A8A3AA11F4A795FEE7FF5D417D5CD89
+:10C8A000021F3FC5632559BE08ED5760435348F04A
+:10C8B0003F610FACE3B8A97E08D52FE63D69B7907C
+:10C8C0001F7F0FED309D9B7ED0E8E0F643CC6FA834
+:10C8D000FD1BE637D47E84F90DB57FC7FC86DADB15
+:10C8E0004F8F402102F861A6E77F33CE8347EF7672
+:10C8F00046E0119160664FE77DA73244FE91DFF676
+:10C90000F1037124075B6437C969DE6685EB10C7E4
+:10C91000B78E0AC869D174F5C565221CF95BDE7E45
+:10C92000746C11BDA7B8249C7F7CCBC9FE9C379941
+:10C93000E0EBA2C7369BA08706EF7389A155F4FEF2
+:10C94000739BD30942B42320E490F8D9431D0D60B2
+:10C9500019F3F1F50C113F5D6BEF2C8A3EDF040AF1
+:10C9600019A85EA9F9992AF96C423857ABDB8E26D3
+:10C97000B9CE7C83F6F3EF117A887C35D4252A353D
+:10C9800039D4DBBC6D362FE9D373DBDE993619E978
+:10C990003075CCA46259ED9E5F98D98FF7CD1B7D81
+:10C9A000E657AB93793E9F5BDC006BAB5C38EF26C0
+:10C9B000C78E57890437BB3EAA4AC4FE2D29D26EC2
+:10C9C0006AE7A8691392C80E4080F7B935A77C378B
+:10C9D00089D81477B58DFC7239295594DDAD74C4AE
+:10C9E000D1496A57BFCAD5D7D0BF2A659061FE2406
+:10C9F00035C3303E3967B8615CDF778ABBD0308F92
+:10CA0000F495E266C483F90EEB653E97C9DBFCC57D
+:10CA1000FB8B18FF1B8A08FF08D2CF8681C591D2F5
+:10CA200095BF584D6663F3CE043EA735C5A735DBE9
+:10CA30009EDAED517B8F4FBF84AD3DC675B5BDC449
+:10CA400075171B9FA2FD7894EC47C10BD7F1B9FB7A
+:10CA500073A3CF5CA6225EBE4C8C5BC9EE99E2D676
+:10CA60008816B79AE5A74B4E2555C8CD5E19280EF6
+:10CA7000D2E357B3FC003CA0F97FD15EAA9E4F7D64
+:10CA80004BF8AB7F90BEF78D966BAD35D5230A6C16
+:10CA9000E857A84EF85719D6D183B308874EFF8CB4
+:10CAA0006EB987DBD6BE3AB0889FFBE371CB5AAD37
+:10CAB0003EF1AB4CED9CBF66C7AB0393BBC7E1AE89
+:10CAC0008F0CF3E13E69B7A1DF9C66EC3F5CBE3B97
+:10CAD000FAFDDEECD0BC3577DA7C54977E4CD42955
+:10CAE000CDE33A3C553B633C642F95AD76CE876AE7
+:10CAF0005D1EAE9F28BDD44F74BB70830CF53DD92D
+:10CB0000B7F5DABA5376C680FC2DD67D0F6585E081
+:10CB1000F1BF28FCCC7B7D3CE08DDAA73553C47D8A
+:10CB2000C7125B7EFC15CE3BF612B889F4C712859E
+:10CB3000BDCD6FFBD462213F112BE425DF15B62458
+:10CB4000D17D97F9717E3A4FAE5B10EFA773A38248
+:10CB5000F4CE771CC8FA2D4FFB1E75A0DCBD6FB15B
+:10CB600018FC4E846C1DF67764FAA691DF99BC33ED
+:10CB70002668F916F8ECC804E1D72A84BECF26B996
+:10CB8000D1CFC5D0D4D43D08867332C29FFA679EF8
+:10CB9000BEF5ADC728EEDD2BF41F879DE67CF4A61D
+:10CBA000A87C14D608FD75E02FC5390B77B5D828B9
+:10CBB0004FFAAEF4BE3DD3D9ADDFC3CED5675DDF4E
+:10CBC000EB0E087D3FB1F5CBB7C8AE9F407F17ADE8
+:10CBD000EF5D7E51D3F3BAC765D647FDF9F1ADF2EB
+:10CBE000C4400FF47D4D930370651BCECD96949D8C
+:10CBF0009A467E6DC93685CF037BF3D7752B8CE7BC
+:10CC000064CF6DB7CF17E7C8028F88EE4FB77D9915
+:10CC1000549E2BDA657C5EDBA2D91D11C7A01FB51F
+:10CC200026931FAD96B8FE7660DB00BE9F714082F2
+:10CC3000A03A9297B8CE817C9B2E96A3E74E8AC7E6
+:10CC4000202547A17DA669FC9CAED585666C9B918D
+:10CC500045FC7AA76DEE010FA19795C1F2733DF8DF
+:10CC6000391E3C90E84DA57B0A539B847C1F48EC01
+:10CC7000ECA03AD281B23889CEA370FDE6E878EF15
+:10CC800080D59B5ACF78E9E79357C8DFC45D421E31
+:10CC9000ACD943E4A75F12F91CCBBF32F06196AB6D
+:10CCA0000510D8EDC17D6BDD418E4B1781C8EBCDF2
+:10CCB000F17CEDB8CF6CE417CCF967F9961D07E964
+:10CCC000DCE39C3A84495E2F547730E7BDBDD50F35
+:10CCD0004625790BB3A2EA7EE6F8BC2B0ED5E3A875
+:10CCE000F5717C2EF44AD97F1F5F84FDBBD6C7B98E
+:10CCF00028CF3EFAA4DD4F76F9E83A7B40C2F1A393
+:10CD0000499DED94771CDD94E7C615609E45FDDDD9
+:10CD1000B3E4D77F6B65B90030DE6B58527637DFEE
+:10CD2000FF5BB23E5EA27B389022C6F59C4F7E260A
+:10CD30009EE38205CF0FE4734EDDBF907ED0B9F441
+:10CD40009127623C14E41FDD33BD0FD5FB3A2C7FE5
+:10CD5000E0F37C90EF3B44E7F58B36C48FA4F801F9
+:10CD60007281F9367FDDE57CBEF973C53783F0AF9C
+:10CD70007CE69A0174AF6CC1DBFD80F0896C7D9E0E
+:10CD8000CFFFBAE3F49EE3BB135B33FA406E379DEB
+:10CD9000F43AE08AA7977989EFC5922ACE69A0DE96
+:10CDA0003388E4624B35D0BA2365716FB473651C68
+:10CDB000C7A566B9ABC91271608D5E6FE80B8E14A2
+:10CDC000D21F1F301D222B87AFA3F3B0E6AC24CDBA
+:10CDD0004F77664F8BBA975825B7D7BE4CF2B9C676
+:10CDE000CE75908E989ECFC11AB21279FE3C87F113
+:10CDF000DCBCB6E18CB19F8BF91DBE3FB2492DBCA6
+:10CE000013DBA51AFD57A77AEFCDC2F717B63EF28E
+:10CE1000C23EA6CB9A1FBE4FFBEE718AFACB3E41B3
+:10CE20003F73FC3FCF21EA1C006B797FFDF9A74FD0
+:10CE3000BCCBE7AB9F6E1E9E2DCE8D439FFC3A8DE3
+:10CE4000CF8B0FDD8BEDA63D6F315FCCF09E73EE87
+:10CE500027498C6F0DE1D197CE77BD8F109CC80804
+:10CE6000CEDBE6AECA63FAE9E76F91A33DE7273A66
+:10CE70009CFAFA3A7CFAFAFABC27B3441E335BCB2D
+:10CE80000F8ED942C7F91CFD85E112D5F7BA9E274E
+:10CE900085F213A3E4E5BBAAA7DFA8D5430E5A96F3
+:10CEA000FDC046F7E45A575B7DD176EF12EBE85DA3
+:10CEB00071A00754577FE14AD86F21724A7F3AEF39
+:10CEC000D3FAA40CD81FA78127113C746F506B6153
+:10CED000A12F85EBE4B49E4CD71003DC6F2A77AB0F
+:10CEE000D45E29791571EF2BC0F23F01EA07131EBA
+:10CEF000164798CFC5F47B2E3312975F9386FB3588
+:10CF0000F783E514C7345B855EF8E7C471FEA6D3EA
+:10CF100049F733E0CA35F8976617A80AAE3353814C
+:10CF200015D624316F28D2F9C09EB9AF529CF0AE0D
+:10CF300052DF8FF67DCFF9589E64A1F82E104F393D
+:10CF4000E2FB6FFDB6F8AF38F703F09439517EAECF
+:10CF50007BCDC176DF5C8FB81D7CDC9F0761EB1752
+:10CF6000F8DEDF46FF6BFD4EE8C6EB6F63BEDA4CC2
+:10CF7000F9C14D890F14D3FBFA3D4CF37DBFA32EAD
+:10CF800027DF0B34DFFBBB167C9F91DD3A65F1D5C3
+:10CF90008AFA47FD28F2BF91441B48383FD24FA37D
+:10CFA000C731607A44ACDAFB9FABDC2FAA1CC9F511
+:10CFB0004838A5B23D1E6BF23745C32D220FFB4604
+:10CFC000CC2FEB540CFEA6A840ABDB7CAD725C7A98
+:10CFD000E569E5BCFEE8A16C61CF8AFA5AEA7B8A72
+:10CFE0000FD56CA13F4D1094053E224E18DB2557FE
+:10CFF0001E99F857ABF56BC99FA13C45121C7EBA30
+:10D00000E83876AB90AFB14A7007B5685DA181E2B0
+:10D010008A2DE8EF7438E88C306538CBC1185D3E56
+:10D0200071AD59386FB954CF798B83E2196C574978
+:10D030002186E37BD0C9AD47F3E315E0E6763C7883
+:10D04000B945F9E47622B4707B35B4723B0542C22F
+:10D05000EF5F116C627F06F7B9F8DC62D23C0BC55A
+:10D060001B45D7F79C2F546874EA9D0EA87025972E
+:10D070004E8709807A97D1033D06E7B0FD30D3C3D0
+:10D08000AC9F651096593FC93064509D40653DADD9
+:10D09000040FF7AB2E920EA5619FC2751A333D2A7D
+:10D0A0007B968BC91A3DFE950D2C1F3A9FEECF56ED
+:10D0B000F9B9CE2FD4AB14927F331FF5E745711524
+:10D0C00027E96AFA1DD9C3A7D3BDAAA2C28AA5645B
+:10D0D00092EFDE30663ADDAB2A1A5BF13C1D79DE59
+:10D0E000933D4EF40B2A0AAD6ECC5AA4B2E9E3711B
+:10D0F000BE4FBB970C33457C7D9716B7F896FDC0A5
+:10D10000ED423DF1A53ADD849F03837BAA7FCA19D6
+:10D11000E27C70C8C4E04E2BCE3BA4F8E664537C9E
+:10D12000E00826A848F7BB9655F1BDB5876C62BEEE
+:10D13000DD2EEAB03A5EF8DC1F83FD4D9B862F950D
+:10D14000D27BDF1FD7ADA5757DCBB2FCA4AFBECD22
+:10D15000925B70B262C04CD4CF8E9015A81EAAEF1D
+:10D16000939DEA5B9ACDE7BAD95C271BA4C5331D12
+:10D170009B860F27BEDC9FADDDC34A4E2B24BA2D04
+:10D180004BF5DE4FF323F142BEEED7F8D05BBB2167
+:10D19000DB735F76F1B9CF23FF4000F0FD9F65FBA5
+:10D1A0001EA0F5EAE2CEB27F3F3EE2EDE5E1B46ECD
+:10D1B00039959049B310EF260F046CEC07B4FBEAE5
+:10D1C000DA7955E4765C07E950E4F53591491B3589
+:10D1D000ABB384EC27AEFB5FBCAE2D3C6404BEF762
+:10D1E000D8F44336216783859C697668DBF6BDF702
+:10D1F0000E125D2F44E955DDF6335F7D80F4AB3BC5
+:10D20000E174D3F46E7DFAE552CE27C169B01BBA42
+:10D210009E8DD962E7B87AECD6CB6FA779656FB7E8
+:10D2200067105E57B687F91C2CB2EDDD41020E3D4A
+:10D23000DF38257D1BBF4BE7B49CC76D16E7B44BA9
+:10D24000A4FA57E2A9FF7BC9ED47F83FD5FC869EBB
+:10D2500017CFD7F05ABC77FD72AA8BCC5F73EB1453
+:10D26000BEC7131079838ABFA4FF5FC23E3E1F5F13
+:10D27000B4D19C4F74DA88FF8B5B4DF781281FA6D1
+:10D280007B0FD1F6BD877C787BB6764E9B0AA98C46
+:10D29000873CAB8FAF077B67CE771F07CFAB2C9F49
+:10D2A000E09569FF62A5E77AC273DDDFD3B03ECCBB
+:10D2B000D3F6263A3939DFB589FBC24F2C75BBA8A6
+:10D2C000AFE9E75A9495528AA33B7FC9F2AFBFA753
+:10D2D000EBEB8215E25E36ACE9CB3257B0C1EE2102
+:10D2E000BE166C18C0F905E6411CF7ADDD605F4164
+:10D2F000FDA60763FD7201D5933B2FA3BA4A538C59
+:10D30000F8CE89DC23DD132D4817758E33BA5DD72F
+:10D31000FCBA7EDFB62BFF89CFE67BCD5DE361C52E
+:10D32000906F3469F17311C1477160BD55E44F319D
+:10D3300002FE1D6F7E3F8EE2D8CD8A378EEAD2275D
+:10D34000F6A7F7811EE8A6B7C5E85EE03CE78CC506
+:10D35000EF4EC9381FBF8A1ED7EEA76BF2F9C7463A
+:10D360000FFCDDDACD0F1DAF2AF9D94A1BD5396E76
+:10D370000317D53D96EC7DAA89BEB759B212B8A263
+:10D380007082FE50BE70C4C2E7E063F616A6903C01
+:10D39000B669F68ECE85D528B92AA1A210CE2F1E49
+:10D3A0000C01FAFE28468D05352A2F8ECB4932F422
+:10D3B000E3DD9719DEEF539A6E1807BF27945BD20F
+:10D3C0001DBF267AAE30CC7F2861027F8F5316BAFC
+:10D3D00083EB4A7D278E348CDB51AEE99E037C21A2
+:10D3E000E29F52FC65BF0AF532C139360CF02B942E
+:10D3F000BB311DC6F8A834DCC27960CC7EC590D79D
+:10D40000DB2F5067BA7C98A6578361B0B00F667A5D
+:10D410001BEF432CD92B731CB7241503CFB4DEE9C3
+:10D42000ADEB9F4EF77E5E23DD07CC34D279A0CFE3
+:10D4300048E741F38D744EAD37D279688391AE6978
+:10D440007E231D33568C31CCCF6AA930F4873D7EC4
+:10D45000B561FEE5816986FEF08D371AE6E7B5CE47
+:10D46000358C176C59785EBE8F082E318C9BF95E17
+:10D47000B8E74726395498CEC5DAF7593AFFFDF890
+:10D480004BFC1F0BDE3E4189CA81FE26D2C7FF2F0F
+:10D49000FE2F18A69D23E8FCBF48BB7A95E687CDF2
+:10D4A000DF794D8D13F6E6F53D27F67BB0FF865A02
+:10D4B000684DA1B8498B0FBCFA798429EFD3F39456
+:10D4C0006B4B25D3397D8CE19CFE42F7DA8A4341D0
+:10D4D000437FC47EF17DD4C883EE57A82DFED823A8
+:10D4E000477F0F35FA0B76CBE7E49DFAFD383D6FA9
+:10D4F00082E627390F9DA5C34F4A50726E7D51CFEA
+:10D500004FCD79AB9EAF9EFBBD95884BEE967BCB06
+:10D510006345FEAAE7ADDF070F7F5776D560DFDAF8
+:10D520006168FF654B675F1AD7F359222C9D1B4733
+:10D5300088B0FCDDCC3BD33DB9FC3D2AD7BD174AB2
+:10D540006F4FA77BFE08BE2B5C22CA3FF4F3D2309C
+:10D55000DFEF68BDC3926B7921BEFBFA98CF86D00E
+:10D560007AFF334CC46F76192984FE67C02C0FD024
+:10D57000F351499EE768BEF97EB6B935DF1B6A6B89
+:10D580000C72ABB8DC7C6FC75C1F0C5B548E3BFD30
+:10D590003F92F89ECE6704DCE8EE78E5C40A2BC71C
+:10D5A0002BA0E5E3376BF4D7EB16B3347C0EE31214
+:10D5B000F3D1FFDEBCE535E6CBA2940EADDE51CF54
+:10D5C000F1F5AD839D23F91E9AA7D02DEA5C7A1D53
+:10D5D00063D0257D5F7221FC17A51C35D491E0D95D
+:10D5E000BE1775BEDD8DB758FFF04A518F3CBC3277
+:10D5F00095EBDFDDEB1FE77AD2CDF56F1AF4E296FB
+:10D6000086F70C7A30C7FF91613C9CDC69A5FA6112
+:10D61000F88581136E42FA1DDB6CE7EFA1510E3ADB
+:10D6200088AFFAFAE195C3C7F3779517C4F3338649
+:10D63000A3BD31C4FCD5F13CD47890FBE1C630B732
+:10D64000663CF53A85DEDA76420EDDCFEF9462DD98
+:10D65000541736D72FEEB6A89F901E3C9493AEC5B4
+:10D660006BF5055EE69FA857B46BDF97B66BDF9747
+:10D67000B66BDF8BB66BDF87B66BDF8146ACCE1542
+:10D6800054D76897C4BD9F5992E7C939B85FDA602B
+:10D690009F3387E2FE859DF90AEE5357109E2D2198
+:10D6A0009FF3FAF9FAD07309D38581FC3D919FEF7E
+:10D6B000871DB1F8F3E9FB9BC91BB3AEA33CF0484F
+:10D6C000ACFF384522953969D751DE77C426F4700E
+:10D6D000FAC6D8EB48EF3EC6C5083FFF4B92A82BD1
+:10D6E00039C336FA7E6A6AB26F504EB1B8F7C5DFF9
+:10D6F000CDE073924BBDCE19B18A3830A2C583E913
+:10D7000039E21C302347C4AD7A5B463CC7E7D3A956
+:10D7100065FD7C389BBF375963078A5F717FFEBE0A
+:10D7200046BF6762FEFE66E49FECFC9D845E0F2DA3
+:10D73000C949E375E8BB1CD2CBE49FC4B1DD82705C
+:10D7400068087DC7D305EF7EF15DE531AA2347D593
+:10D750009F4B72441D066E03C377408BF71E3E44F9
+:10D7600079D6FBC37C6388AE732D6A09F17571C2EB
+:10D770000EAE774DC951795F8497F145FBD34C7C50
+:10D780005AEC08737DEC42F5F0DEF03F767BE8174B
+:10D79000B95CFF55F3F93B3C6D5F84630AD15FC709
+:10D7A0005B87A37B9DF3CBBF5ED7D5FB9F3EF1503C
+:10D7B000B65697BFC5DB833FBD55A34BBBB5E73A14
+:10D7C000FAFD1A7FCFE1CF3000AADBDB63D14760DF
+:10D7D0005BAFD1E9D80D880FD7273C2388BF8BA733
+:10D7E00039F9FB737D7D5CC7F787F3ECB33AD5BBA2
+:10D7F00090F05F582FEAEEFA7844127CF5AF14757A
+:10D80000D0C5DBDF3B44FF1F8405CFE415727EAF3C
+:10D81000BD6FA633D297BF8B9A2B8B732BA4EFDDF2
+:10D82000C46773BDFDDBD235922ACE57236BCF0C74
+:10D83000A17B648BE9DE1A7D1FA6D5AFA0CD5897DA
+:10D84000427AF9A95E71EE7914F0B9965DF3237608
+:10D85000FDFDC18AE1FD634EEF4F893E2F687603DF
+:10D86000E7072CB87F9B9E279BEA286D2151EF6C20
+:10D870004BB1719C4CF10EF9273DDEB9EB4D51EFE8
+:10D88000BC2B4DC4D1041FF1573AB89BE3842EFF43
+:10D890002FB955A29FD3EA0BD0FEE05BCAFE4B1E08
+:10D8A0008AFCA5F38B3F5FADD503843F2CD6FC5F8C
+:10D8B00031AD43014E6E1FF68B45DABE183F72DD67
+:10D8C0006D34F89A04305ADD6CE56E431DE1FF00BB
+:10D8D00090CECABD504500000000000000000000CE
+:10D8E0001F8B080000000000000BFB51CFC0F003AD
+:10D8F0000917B1A1F26FA0F1B33851F9BF5951F92D
+:10D9000097D0F884B02E1303C30A46D2F420E39DC7
+:10D9100040FD0780F838109F6322DF1C103E210C69
+:10D92000F48F1803C34220DD0DA4AF00F11F207E49
+:10D9300004E44B8B30306801F1325106864420BD3F
+:10D940000688CB4520FA4E02E96651F2ECD4E3A1F9
+:10D95000CCCDA39832BC411A955FA3C2C0B05695F6
+:10D9600081E1931A84BF02499E5D9D81A15605C243
+:10D9700036956360E807AA59208DDD5C33A0FC046E
+:10D98000A0BCB83A840F00134DDDCB680300000043
+:10D9900000000000000000001F8B080000000000D5
+:10D9A000000BCD3D097855D599FF5DDEBEE42679A3
+:10D9B000819705B8090183067C09612DE24D8C1819
+:10D9C0006C8A2F88364E197DA0D56859223235B61B
+:10D9D000DABC4012C2A6416D8741A52F5A2D525A7A
+:10D9E000A3624B67D4792C1DD1B1355AAA76A49D78
+:10D9F000C8388E5A65E242AB558739FF7FCE4DEE6F
+:10DA0000BD7909A89DF98ACBE1DC7B96FFFCE7DFB5
+:10DA1000CF7FEE73CB3E80090027F1CFB900574B83
+:10DA2000009037548237D608118026CDAD6F2A0674
+:10DA3000F886123BAC57B1E763E5D8FD3A3E9F5CF0
+:10DA40000B610005DBE703C4F07FACDFFAE0BA311D
+:10DA500089207BA62CCDC2D21CDF2C9B5400AD129A
+:10DA6000DF6F999CE9BD5942CA35D0EF05FA73B210
+:10DA700004A0E5E86FA71E32EBECBF0208455E0F7D
+:10DA8000B0BFCC8259271580F7828BB3D230F278A1
+:10DA90006FB5769FA54E02F853EBCB530F4D1AFE90
+:10DAA000FE1B0A34F7960F7F3E0BD8A433101F4994
+:10DAB000777CEAD0BA07D71964489AC3FA03A43D21
+:10DAC00039ACDCB5ED2CB56C084EE73A00921CBFC2
+:10DAD0009FB39F2752932E60B50A29318FE052D908
+:10DAE0003F3301A829DB97EB763500C1E580B723EA
+:10DAF000F2978177C4FD12EDDE0BAEEB04D66FBD5D
+:10DB00008BD34B7B9E1C5B07C3E9C5DC0F138FA730
+:10DB1000BB1F37818FE631E9A8495E3AEABE9F8A8A
+:10DB20008EAE443A3AEBFF9E8E927FBD74D441E3B1
+:10DB3000FC95D1114037C717F4AB38FFD0735E4660
+:10DB400096F64A4867ACDA87708FE353C1B896CE31
+:10DB5000EBE5694C4C41ECE93398DC1AD7BFAC1EBD
+:10DB6000E11E7B74E19B58762EA9A93B9FAD2FBF88
+:10DB7000B1F7F90B581989A7A404DBAF3B4046A1C4
+:10DB8000C2C65B91AC66EB6BC7C1E6023C905C66BB
+:10DB90002471BD60008C01F83BB126005957593DF6
+:10DBA000447FCDB40E37A4393EA4939EE1FD475A7D
+:10DBB0007F08FB996D8AF1FF6B00D777AA7EB0963C
+:10DBC000CF9764FF20BE0B87E6A771F29B2C7540B0
+:10DBD000FCD8DFF7E15F08BFD7FFBFCC5700953E09
+:10DBE000940FA17A594B617BE8CD56593DB24285DD
+:10DBF0003493110555DD924B3FF5BE7402D4F5F216
+:10DC0000FD911A4243F0FD2748443FE3BFF55ACF48
+:10DC100006467227960663441F1A406ECEF0F57CC6
+:10DC2000B71509D9525F52232568BED8D3A5AC7F5A
+:10DC30007209D77B77D42FCEB6CA2B8F2409BC3973
+:10DC4000E903747526B215A70FB55E367CD3BE38CE
+:10DC50007DA89F933EF2D65AFAC167DFAF88691755
+:10DC60009C267D7CD1F9CC7D1DCE576D625F4B7DAE
+:10DC7000C0F8F6F6BAC519ED8C91F7B592F83D5299
+:10DC80000F462A43BFFCC1FD4C0E2FD9FE2883DB73
+:10DC90007B836DBF94B1331B7B46C18712B1AFD775
+:10DCA0001CD7D7A2E8AFE5B2AAAAC9389E1BC763A2
+:10DCB00074B6317A7B12183F9C40DA66F850BA2B62
+:10DCC000D258875288DD2F209059DD1735529B8816
+:10DCD0000E52B42F267C1E5DB6E15F8DF86D75681F
+:10DCE0004C4A56F87D2D6E82C38DF3317A57343607
+:10DCF0002043851A84B42F8C2D38FC4806272762D0
+:10DD0000FDDB363AE8D22B21D33E98F48A68E5F45D
+:10DD1000FAEDD3932FCEF996D8E13DED7E41557FB4
+:10DD2000DDA28746EEA7C2EBE6FE30245E8503CC7B
+:10DD300018DAA70D2ED8279DCDF475D1A590604F88
+:10DD400037E0AB3944A764CF6C28AAD490AE609773
+:10DD5000A4229CA61E85680EB5AB90741A47F636B1
+:10DD600003B653820695E6FB91E112F49734F697D9
+:10DD7000B271BF22F6F72B42AF4195EBB57E136E21
+:10DD8000D2B3EA509DADE39D9BD8FF189D242BA4F0
+:10DD9000D4FDD2F0F7F5A817995CAAC7E716B9B277
+:10DDA0007D900FA2B45FF5E2DDC1C75E9A3C9DD1C4
+:10DDB000475F4C01145BEB1EF318B56CFCE7CF9189
+:10DDC000521E49C0CBE05C24E07CD6C81D8774DAC3
+:10DDD00057EB213A5E74C19F2248C6C7F7FD5ACD62
+:10DDE000442F8BE6B986E060FFADB6AE8FFDF7C37A
+:10DDF000C17D29A2794CB856562A0447DF3C2985B3
+:10DE0000F31CFADD7FDDFA2506E7B35552CCA313E8
+:10DE1000BC2160F3F519EF4746F53BCCF975D010FE
+:10DE20009FCEF9CDFD081702E115FE9DE195CD9736
+:10DE3000AC19E85F8F783E26C5D6B3F9B2E6B74C89
+:10DE4000C0798A6599E0DD38CF2B2B8C7EE0E531F7
+:10DE500032E23328F83CCBDDED9DC8E0EC9C24C3D6
+:10DE6000BDECD1C6D2D1E559BB439EA95ADC90582E
+:10DE70007F3DA9552AA3F045CA90EB32C9BB672460
+:10DE8000AE273B928BB5525CDE21BB1D887A296E92
+:10DE9000D1ABCC5E7C4662EB7745381D67D7C6B9FF
+:10DEA0009DD83786E45740EC47D6B4C55990C10E8B
+:10DEB0001E711D6CA24C7673B6CCE183A37C7CD51D
+:10DEC0001C3F67F4F13788F13F6C92A00FE153E3F8
+:10DED0005EDC7F302A889EFD823E616D0ED54DB995
+:10DEE000EB298B7715B37DF44465D0755C5F92F6B2
+:10DEF0007933DBE322068ABF96BD674D377FAA9050
+:10DF00005D922D9F4826191C9BF75F0B3AB353FD7A
+:10DF1000D114507DEAD55EC4CF66A614F8FCBD804E
+:10DF2000F30718D9A27C0D30F9AAA37CD57BD33294
+:10DF3000ABAB751033D8AB901693FC8C640E444B8E
+:10DF4000DA54F6BC7D2910FD025A1116FCB6475F63
+:10DF5000301406576723905DD319A9A1F5B597D75B
+:10DF6000788BD1DEA957E9397CC2F061DA214C1EE9
+:10DF7000FACBC0C0F936E7432A88BC549B47F4E883
+:10DF8000D6F8FAF5EDA5909ECEDE67CFDC8FF327AD
+:10DF90006F81D8243E25C935D5A40B359194D0BFC7
+:10DFA0006BD1629B32D0DD764864C9336C744A7A97
+:10DFB000D789B72C375C88F8EDAC60F45F3C7C9C6B
+:10DFC00022E41F466FA9D8E28B4A32CC532CEB4493
+:10DFD0001F665DFFD04DF08FD47EA81DB3337371E3
+:10DFE000684342BC406D84D69703837F0CACE78ABC
+:10DFF000F58E81666A179DDDBD1FF9ACC0E8AD46A0
+:10E000005C7C3774E9F3B46F70B786F108066DE98C
+:10E01000C9DC21396104B99C782F26937C0CC9692D
+:10E02000CD6003847C7D5152D63A901F91855D1856
+:10E03000C09B5ABBA7A27F19869884EF43313569EC
+:10E04000953F59C0EA36FB0F8E94CE24D2E27C0174
+:10E05000DA7E6419ADACF90C1CEF0E06908FF9C98D
+:10E060005B4209D2177FF285A7E1647F92E3596989
+:10E07000DEBF0CEDEE1B157F6C13D2438CEB072F2C
+:10E08000FB07E55FD66CD5268FB30D7B3DD7A13757
+:10E090001628415A6FF65740E803A37ED29821F81C
+:10E0A00018640D4837DB6A55C0F982410E9709673D
+:10E0B000AEF2495A0682E318C2C1D0437084CB80C5
+:10E0C000FC3D06CF31073CC71CF01CB3C2D3E2E5D0
+:10E0D000EB75FAFDCB65E1F733BF17F5E00978DBA7
+:10E0E000A8438231C6915E096BBC6DD0DB47469573
+:10E0F000061AEDBFD3EF67FBF39E4D3FCC16759D1F
+:10E10000D9F525049FFD3D14119D505D8141FF759A
+:10E11000F96C133FFA575F617C77ED6117205F312F
+:10E12000FE55F0BD4BBCBD56F8B1CB51FF33BD7DA4
+:10E1300015C4C308DF3B2093BDFC0EBC109E6E913E
+:10E140008B77C86EA1C7D9865AF9176251F4ABD53F
+:10E1500060679F1226349874269DA47D8B01F9DD9B
+:10E16000414E6F49F0B6917DD1C5F5A3E9F77DBD6C
+:10E17000DBAEAFAFD96EAF5F0D8BC7207D5D7DA7E6
+:10E180000B526CDC6BADF607DB9F6FC91AC1770DC4
+:10E1900034776A41B2B31A711DCB3550D14F5BF958
+:10E1A000B37B662E63EBD921F4E85B4CAEEB16BD76
+:10E1B000715D24E536CA87AF6FBD145BF42569E451
+:10E1C000F56D70F52D42FB20B9D5457E1D38FDB5A6
+:10E1D000BD0AF96B967E04EF955DF6F59D6AFDCE5E
+:10E1E000F5328F85D67BDDAE65A437475A8F7B9796
+:10E1F00064A432E8B7874D7D28E48B49DF265F278A
+:10E200006B80DB7BBFF7A5D6B3F97E83F291F6BFB7
+:10E21000F96C1E47699E85E5A9FAFDDBE7ECF7EF8F
+:10E220009FB3DF6B428E3BFBADF4F6BB713F57AB48
+:10E23000C93A491EB2A3BDAE66A390A1C2B5AF3A1A
+:10E240008DA698A55DD769B63B2C959C56BB3A79AF
+:10E2500094F18E0B3BE3A93DF7B9FB91FF76BFBA72
+:10E2600008F5FB37FE49012F5BD7F13D2148237D9F
+:10E27000AA2937DA2BD731BA4A513D3DF3628B5D7B
+:10E28000C52896C6FFC64321B20FAE7BC493AA67CA
+:10E29000FDAFFBE97F4C038687E3EB06FEA510E9A3
+:10E2A00075B7C4FDBF64FFB48BD9F3EB54B8229E9D
+:10E2B000814E6485F3CBDB3F0F34A2DD27EDDA7F9F
+:10E2C000398DDBFB5517CA65B3DD47B28BE665EDCB
+:10E2D0000C7C9F7C504A4D92387C0D5387FBDD6F40
+:10E2E0003F2871F8F6B9523E846F578F3BC1DAADC3
+:10E2F000DEF52ED1ED790FFD388C7858BD4FB1F990
+:10E30000BBAB772969CF342A5FC51235A3C4F86D3A
+:10E3100095E0D7557B57921E58D5BBF95DE4D7D50C
+:10E32000FB5C36B9CEF0124B235E5F5262F5587F2C
+:10E33000F487619DA1EAADE8EEB0564EE32E73334B
+:10E34000BABA68B6BD1F8EFF61CEF0F1000628AEE6
+:10E35000B9BA77239F0FB8BE31F9F42DFC4BFE708C
+:10E36000BD3145B19F3B9C806767521C72576E461A
+:10E370003FCED41726BF7EE3C7277626D9BC6F3F92
+:10E38000F2879D4906FF8AFF797FE7B7D9BAE0494E
+:10E390009F867268F5EEDF84C182F75A85FB61C7FC
+:10E3A0001FFCE1033B18BF1CFFAD87ECBAE34FFC39
+:10E3B000D7789DADFBF8C31F8D41BB73ED13E78F7D
+:10E3C00045FA5AFBD879636114FF01E935E5B1EEEE
+:10E3D0006B8AF655DF27611006E071513AF6E7E0E7
+:10E3E0005E258DA1DB775EF6A43C0C3FABD9B396DE
+:10E3F0004ADCAF95A487B07E33C3F3AA3D1BDE553C
+:10E40000A665C277B2508E62C9D8268AFB7DF145D7
+:10E41000E75461E98AE9481F3040F2DFD96FF5110E
+:10E42000B6AF678FBC8F27E01337E27FF59E8D7CF8
+:10E430005EC73EBE837F999341FF0FDBC715DFDFC9
+:10E44000812FF7E6D2BE8FB48F2B1FBB6454FFCC55
+:10E450009407A7C26F93C4E13A5B31D628C8578F9F
+:10E46000FCE8811D11BEBFF50C21C77F7C623C0614
+:10E4700097DF700D5C8E7272E0098F762FEB73DD83
+:10E48000132F119F1D7FEC79B74E72128212D37B2E
+:10E49000C761F04F1FEAC15512AFACFE4128ED092C
+:10E4A0000FEDD3AA54439D1EA6E7AFD2F314A7FFE6
+:10E4B00055A9FD4BA40CFBB65B29E1723995477851
+:10E4C00059A9F7B9B5A07D3FA5D9B88FAF2E40BAED
+:10E4D0001B691FCDF56BB8FE5996FDFC01E7DB917A
+:10E4E000F8F3788F4795B286F6F7B8B00F56A7A421
+:10E4F000972003DF02ACE3F08E70FE68964E7AF848
+:10E5000081831ECCFEE6BA4FC5D7A75ECF67C3D7BF
+:10E510009D8A6EA31B136F6F7F9259DEA7859C584F
+:10E5200005C9BA8289C3F5950AF16461F110BC9DF1
+:10E53000BD0AC9F1B7772964A73BE5C2AA11FCF16E
+:10E540005F29DCFE58B56FFF34945F6F1FF8B9A0E8
+:10E55000434EE7ABF6BCEA4E0AF99FB2CA7F1C2FC6
+:10E56000C37EBC2CE05EFD78E6F156EF7937E378A8
+:10E570006FA9C65711FEB7FA5C906443BCD5AB6473
+:10E580008C6F1C505CB6386E6768E6CB5918DF0C90
+:10E59000FB755CF7FA75C64B49B4435E7001D981CF
+:10E5A0006AEC0D0F7BBF3EE4A773EFF5E1AB41B71B
+:10E5B000E8E976079ED4689CFC603512AFE2B1D7DB
+:10E5C00094CD1F7569B20D6E509345184FF955F1F2
+:10E5D0007FA938EE7368FF9D31D4FE39153A72D9A0
+:10E5E00078CF1952AC0D32C4A71CE3C7E729A05B52
+:10E5F000E9CC2893ADF1D5F0819B282ED102CD69CD
+:10E600008C134111F4DE6F19F7EE560DD26C7EA813
+:10E610002B93ADF1554F73B3E1617014ADD54AD072
+:10E62000341B69FE71CDB23DAE2DE65F23E209B029
+:10E630006BF7EEDD6CDC3A7C57827E0C8F573177BE
+:10E640008AEC98F3841CFC6761071F90E287D0CFA7
+:10E6500032F46D2ACA39A9749B8AF6C4C24FBAD55E
+:10E66000E5167A5C58DA5684F472F853A531135DD6
+:10E670002D51395DB5156F28C2FE877D371671277C
+:10E68000344AEB2C10EB3C34EE9A603F1B777FF161
+:10E69000355B2633B8EAA20A60BCA52EB26C4B05E6
+:10E6A0005B7FC11125E663F582A6A49A983A7C9E09
+:10E6B0009D28EF19FEEE453C32F87FD01AA5FA03EB
+:10E6C000AD3A95BB5ACBA8DCDD1AA3F77B5A67534A
+:10E6D000BDB7B58ECA475AE3F43CFC2D7F02E977FB
+:10E6E0006F6B233DFF696B82CA1A95F3DB42810F82
+:10E6F000CBBAE91C6C497B781DC6514CFC39F15DE5
+:10E70000CB282E87CE0D241DF13D56E572C589D745
+:10E71000969620D9A53B25B0E173A6CAEDC8B8806E
+:10E72000E3903771A1CACAF7EA4ACBC9EE81780CE7
+:10E73000E5F44E297E5B05E397A7C6CD8A5AE56EC0
+:10E74000249888AB7943F5F15D3C3E334BE5F2A963
+:10E750000EDA0E6531F88C4F40473A33D779A05A1C
+:10E760002F42B978A08DC1538EEF6528B3D0993967
+:10E77000DE5C011F0433CBE921BAE5FC1F9D5BB6CB
+:10E780000DE3C4CCF18C4DD2C9EAB6F5DBA69A7183
+:10E790006F9DE8D8A413C63F4F8D8BD030DC5F6CE3
+:10E7A0002AE6EF7D9CCE5BFADFA5F856740CD8E222
+:10E7B0008D1D4D32F9393B8EF2B8F489A6926D93D6
+:10E7C00059FB6A8637F4DB73169666252C74BD45B3
+:10E7D000D0D30E6F3C4B1B457F758A7666FD155F67
+:10E7E000E23B88E7BF9FF0937CA4E71DAED4652889
+:10E7F0001F5B8E7AF475129E37C493B86FF122F6C0
+:10E800009C8174A26EAD879616E4E70F2D37EBDB83
+:10E81000CEB0F0792866E7EB9D2DA3C7A54DB8775C
+:10E8200022DCA3C4654DB8CDFD3851B764E01A1899
+:10E830008E07E7B8390B978C3AFFDDC8771EC2C345
+:10E840004ED5229F8A9A353A6730FB9BEB75F67757
+:10E85000AE77285FE1F4CE677A5D908BFBF9F0C765
+:10E86000E31F7D0E70CBE30ACAB12BD4442FEECB4D
+:10E870004C68A63AA803F9C82FBFF373FADFD1F9A1
+:10E88000403EF1919A2A46BD70BAF375403C5E8DC8
+:10E890007A2B26C7ACF2DC2C7FA19A718234C58F0B
+:10E8A000E888994D29076E8E66C2F3E0F845EADBE9
+:10E8B000D6F3A42D00DC4F4F7BE99C0303221AAB57
+:10E8C000171F86CA4D6CBCDD429E54ABDC2F9C7E6C
+:10E8D00058EF5178FC48690859F028E2A9661CAB4A
+:10E8E000036E068D7575AB15FBB1B9C9870DEEC406
+:10E8F0008B882F7754A7F3775724417C0522FE3D60
+:10E900004EC4E9CF1771C6FB5B789CB105E2179E38
+:10E91000817C7D4401F28F13136DFCEB5CE77E413B
+:10E9200057FF24F4DFCF85DC2E55F74B596CFCD014
+:10E930001BE9036156FE4CC8F1C7841C3FB0ED5F74
+:10E940008A319FA023E18E214EC355FEB4C4ECD082
+:10E950005B67BEA15FCBDA77744F6E47FC6C58CB18
+:10E96000E3F28FA2DC67FD1E16723FDCDC793D9D71
+:10E97000DB09F95264E60B08795224E4C9C16D2F12
+:10E980002EDB80EB4B78699E16483F8D717D582BAE
+:10E99000939D12EEFDDE0D38CE43AD061FB77BF71B
+:10E9A000DFA17D7F8F375DF9AF18FF9FE78E25517F
+:10E9B0004EA526D9E454B877DF8DD82EDCFBCC4D9C
+:10E9C000940F23F0E0799CAD9735C9BAFD703AC435
+:10E9D000DA15F6A7D1EC66FBDAB3700A1BAFB45EAA
+:10E9E000A670F51E297E5E08E9A1819F4367552C1C
+:10E9F00069C3F6DD2B5E4862FF31CF364BB8ED3987
+:10EA00007F776F35E2EFFEA2D79EAE66E5645731A1
+:10EA1000D141F0A89EFF43C0F1E3D16BF591E9F03D
+:10EA2000E08A358072CC73A74CE7F4F7DFB906AE05
+:10EA3000B1E65DAC5033C6C726BB3CFC3CEBCEC553
+:10EA40007D2867CDF3ABC295B55EE2FF67C1763E28
+:10EA50006B9E6399FD2BA4C464571E9D57F0732DC4
+:10EA6000D1BF40411B8F556F90391FC4D33E6BBE41
+:10EA700049F07A399E099E592E95E0698FD5EEFAB4
+:10EA800017369F3AEB52D2CBD06D87C3D98FC131A5
+:10EA90008BC3C1E133E118C74C82209BFFF6852F61
+:10EAA000E6237C1FD60DEA1B3FFAFF1DDF95D3132B
+:10EAB000D8FE6C6D97E9FCFE40D5012FE2714B55F5
+:10EAC0008D9FDB3F9CEE72041FFDA04E26BE3D5184
+:10EAD000C5CFFBE19393741EE612EF73F20E78E953
+:10EAE0000C236904AB6762FA81F9C7925FC0705367
+:10EAF00099F4DBE4A7DC9263CB371807058EBC954D
+:10EB000092A1F6E87FD71D91502F85C47974A97919
+:10EB1000BEAD1C8DE1FAEF32F562AB97CA9EE603FB
+:10EB20003E9DC1F58B664627B42E7B5E8AA7096899
+:10EB30005D05CDFC9C6D8BD6B7DFCDEA45DF65A8C2
+:10EB4000D7D19EEB25F902DD3C5FC03CEF98B4C203
+:10EB50009EB752E4C8B719969FF519FDCCEB5DF648
+:10EB60007CC313B0650AD1435F896D5F7AE630B725
+:10EB7000E6ECE1FEE6E0B8C29F82289773393E3E9C
+:10EB8000C7ADDF529AD05E0A5F58996D3D1FED7494
+:10EB9000713BE9D0EF3C80F1F80DB55E8AE398E770
+:10EBA000E8E67E6FC5A42BCC77687FC087F4B223DC
+:10EBB0005242E5C1B9CFF8FA890E793E8047AC6977
+:10EBC000DDDC67163631BCDE9327938EE9287A2187
+:10EBD0001FCF176FAFF5D2797F38D0DF7B90D58309
+:10EBE0007FEF8EE1F9F6FDD5E946ABFFFA908BDBBE
+:10EBF0005BDB5D425F6DB19F3F333ED88E7CE009A9
+:10EC0000C6E9FC52F68ABC09879F63E2237C205F39
+:10EC10002E9ECACB92A943F6F9DD826E760879BFA3
+:10EC200045C87BE738C54DDA0137DAFD2BB44A25F4
+:10EC3000035F4E68B1DB09E39AED7935854D76BA0D
+:10EC40000FC50A1C76459AF498A98F37F88213915C
+:10EC5000EE2B99BEE4F681265BCFDB9DFA78B76A8E
+:10EC6000EC7391BD7B7A764238106F467C3BEDDCCD
+:10EC70004302DF1F2BC601C46F408D1F72511E68F7
+:10EC80009CE48CD36E1806273038A78E0AE72F5DD8
+:10EC90009FC17E3AD5F9C09FE4F8F6E718C8F3B3F0
+:10ECA00040E45D84480E7784B8BFD2E1E27EC27B47
+:10ECB000625DFFE15268DC01415FF303D09C399F44
+:10ECC0008CC78B3E40C304DB8DCD9CBF8B160BBD28
+:10ECD0002FCCFCFE03173F679B3F61F479FE88F35E
+:10ECE000B0F257AAF1AECB728EF384CB78DF658990
+:10ECF000537CE8D2383F98FB21F2734DFB699F6A41
+:10ED00007C64ED6F96390B553ACF3D01FE98C2F009
+:10ED1000F3643EEC0526479E94043E7FE7A33C2027
+:10ED200013DF83F635CA0FD4034703298CA798FB5A
+:10ED3000609EC30CCA11D1FE4C3797278C6E026EB1
+:10ED40009A3FCECF0B214DF2A140D0CD0EDFD2DBCA
+:10ED50006A5979EBDCB75EC67C85771EF3E908D784
+:10ED6000D6AA6361ABDC84263BFD98CF5D1F16D22B
+:10ED700039FD37A544BEDBE247BA22036EECFFA49F
+:10ED8000A4933F97FC8D42F6C893526A0A192A2A27
+:10ED9000D079C693D746539B2CE71D4E3B3FC7D730
+:10EDA0007FD76A5C7713B39760F8BE9976FAA0DDD7
+:10EDB00011B5F78FBB41D8D96CB98CAF2BC4BA63EE
+:10EDC000AAA1201C332041E52CD0A964FE40A59BBC
+:10EDD000B59F0E03F9C847EB02E3BFC4ED8CFF33C8
+:10EDE000BC197F8D781BA25BBBDE36CF1DF2041EE3
+:10EDF00042D04CE7EFBF685CBE71129BCF5D14241C
+:10EE00007B38AFB1FD7A398CD97E7D1AFA9B79E2D5
+:10EE10003C1C9670FD6C9E4FE7D4DBF5B9537F7BAD
+:10EE200084BDE11941AF3BE5E6487A7D85DBAED78D
+:10EE300007E3C723C83F67FCF8D4F24FBFADB6184D
+:10EE4000F3348C976AD1AE9BA752BC333C11AE8889
+:10EE50005BE8E1F76E223A56F2BC994D8C5F53673E
+:10EE6000703E07F413024C01E179C2383985F93656
+:10EE70001B92A93ACC3FDBA04ED2ACFB583D8EDBB7
+:10EE8000B35B6BFC4D56BBF60F7E178DFFCD40F587
+:10EE90003348C7E5C1540DB97B067304C7F0BC4BBA
+:10EEA000DCB7B334E8C773580F70BDCD38C2CBF5AB
+:10EEB0004AADF63AE56726E0646034BD60CFC7DC52
+:10EEC000ADA6D6F9111F111E7F096D97283947E9A4
+:10EED00035D298CB5515587CB79BEBAF329C67FF6A
+:10EEE0004C66EEB2F67FDCEF263BA73754A8A23D76
+:10EEF000F9A4BCFCFB68070EFCD603789ED2FBE9A4
+:10EF00009974AFA137F4A5054807BD1230CF96AD6F
+:10EF10009FF10F4FFE8100C6EDC3E7198071CB81D1
+:10EF20005F40EC5E36BF2BFA689CF276C108C8B32E
+:10EF3000593F1F7461FE4AECCFFEF7CF6574F74866
+:10EF4000B0F28EB361280E60FAFFB5FEC4A3086765
+:10EF5000C7987F6B423EEB62702A6487195184BB6D
+:10EF6000324F26FE83BC606A127B5E7D38528BF97D
+:10EF700068D56A054A1A0607DFEF577C892710FF14
+:10EF8000B55A436D366B5F7544277B6541F4FA4390
+:10EF9000589F7994D73BDC40F620F22F58F8AFFA0F
+:10EFA000C3F1B4BEC3428EB7478D3E431A653F34AA
+:10EFB000D5719FC39EC762A5036DA68D0E122E2B21
+:10EFC0001DCC667430D54A0786F459E8E07B42DEF2
+:10EFD0009E9A5F389FDCA870BE194EF7CDDE9CF27A
+:10EFE000E1FC61CEBBA92A2782E7AB261F68B36E7E
+:10EFF000D6B0EE59E68E23DF997C61F283E21BE402
+:10F000008B8B7C6C7F9704F5F333F105FA7156FA1C
+:10F01000BF78043E5904038730E77E910AC92C2645
+:10F02000427E35E78DD2F116BA77E269D13C098E7E
+:10F0300059E4D1C993BC6EC1A3369807AD9C3EBEBE
+:10F040005F50F58E8885EF3A99FD8C4661971C8359
+:10F05000BC62E4BBE541CF0CBCDFF07094E2FB9EE8
+:10F060007813E5ADCD7A3B7035A3C33F8E91755CC7
+:10F070007C87BEFC21E2DF97038076DBD699D74DF3
+:10F0800040FFE48FD72626609C7323C3FF31326E86
+:10F09000526365CA85EA1FCBCFCBF4282F1351FEEC
+:10F0A0001CC4FB94A81BA25D3FB563FB6C9387DB7C
+:10F0B000BD5C0E6EF7723B70A3BBDB8BFC3550EC76
+:10F0C000A5F354E7FACFF5707E38D70355B108CDD4
+:10F0D00046F1960EAF52D7C3E350E973D9F37327C5
+:10F0E00096DD6BD58F66BF3B5A53F1D726E17A7612
+:10F0F00051995B9F023C37F09725758CDB7BD7419C
+:10F1000022937DB8C3CBE304DE03FF40E74DB9A5EE
+:10F1100031F24F23F56C3CCBBE2E6228CC62728656
+:10F120002DCB407AEFD0FD64AF2D8AD4BCA94E1B05
+:10F130004E07F8E798653FBDFFA3247AB91F477EC5
+:10F14000C85AE1F7D59678897F3A5ADC3D184FBB0B
+:10F15000CC934DF8FA2052336A9E2DFA5749460F48
+:10F1600029E65F6189E720C933F83908D6F11C0424
+:10F170004B3C07C112CF41F03D9E8360FD27AD0699
+:10F18000D5F13C04EB781E82753C07C13A9E836042
+:10F19000B9AFB589CA7F6C6DA6F78FB7B6509DED34
+:10F1A00013D9E350968C2E6678EEBAC96DE0F976E5
+:10F1B000B7D88F8346492EEEA32FC2FD53DFB3B7D6
+:10F1C00003AEC717E571A5CEE8ED70252BBB6684AD
+:10F1D000BA30E0E57D2848A54FBD0330BEB0534AA4
+:10F1E000366124EFC60DFBCE53991E2F8D5E5F93C3
+:10F1F000C3EAB76C78723DE6F74CD6DB62CBB5A1BB
+:10F20000BA1EAABCEE614B7D42798FEA67EDD779D1
+:10F21000F6AF477E4638D0C8DBB2E1E0796DA58C09
+:10F22000984A80EE790C14BB53488F57E17E4D42CB
+:10F23000F8B9FDFF65581F457F7A82EEAE443E6205
+:10F24000EDD39C7E4FAF7D371E66CD18DE6FB47652
+:10F2500072D569B5036594F1F0BD34CA381DB05E4E
+:10F26000C33B679B91E731EFC817207FAECBC5F951
+:10F27000B7CBC7CBFF167C7BC85B13F7B232EEE58A
+:10F28000FBDAE58BD7613C7460AA4C71855E171B75
+:10F290000293775B8A7F5DC2E6FDE6332A607CFAE3
+:10F2A000871ECEFF932684B85EFDB697F4EA051359
+:10F2B0007EDC9EC3EA93EE8BC5504F6E86981FE9A5
+:10F2C00024B985F3FB8FAA26E634B0E667CD782C07
+:10F2D00007E30DAA802385F79258BDADE3EA09182C
+:10F2E0000FF9E3F35C7EFD54CCD3E3EA6BA6FD9CFF
+:10F2F0001124FB82618CEC87B6A84AE7F7723E2F97
+:10F30000DD2EED6FB09D9B29E82483C7FDE92C2FEE
+:10F31000F9E91F7AC47DB63EB22BDCBE8496CD9E41
+:10F32000772765E2F7F59A3F8529FB9B839574BFA4
+:10F330003659AE527EF6E6721EC70B842E4DA13DA5
+:10F3400071DB7E1F970F412FE569A5CAF71EAE89B5
+:10F3500060296BC8EF2963711DE15D9335CAF762BF
+:10F360007FA3F74D11CAE7DE0C625F9A64F2173B88
+:10F37000C6FCF95FCFC673F1AF6B3171C788F22558
+:10F38000C90492F1BEEFC08100C2F3B7E6FDA4FE4E
+:10F390007501D6BE7DB916C37D98A6D5D4611CB1C2
+:10F3A00043ABF1225F05A6D67A97911C1ACC67A6CB
+:10F3B0007B70EDE5DCAEC5F7C897D00E87F0DE4B6D
+:10F3C000A1906581EC4A09EDA18E7A0A2F61BEAF4A
+:10F3D0002D3FB33DE742CA7F5716E5109C1D60786C
+:10F3E000B17DB25E25FD5518F4A6D1DE2B34E38B3A
+:10F3F000989A6CF1377257D8F39BF39B54DBFD8FCF
+:10F40000B1097B3D4FF80F798E3C68C96B9E23DABA
+:10F41000F1E45C6F6EE4DE6C8437172F34EBC3D7F6
+:10F420007347A4B201D759A8F909EEA8B6AE1AE5F8
+:10F43000D758686E43BAFBCCF03AE09C56DEDE87C4
+:10F44000FB3E4D57E9BEC3D930B00EC7DD2CE8BC3A
+:10F45000ABD8AE4F7FE851C43970CD1CE4478C87E0
+:10F46000252DF31727FD90B4CC37B12BC7569FD469
+:10F470005D606B7FC6F612DBFB29A9336DEFCFDA37
+:10F480005569AB4FED9D6B6B7FF6BE1A5BBD227D60
+:10F49000A1ADFDF4C38B6DF5197D7F636B3FEBE58B
+:10F4A000E5B6F773FAAFB3BDFFD21B6B6CF573060D
+:10F4B000BE656B6FDAD74EBD38DDFBF9EC6A0FDE47
+:10F4C00007B3C50FED76BBD3EEF6FECF7A7D1DCA2E
+:10F4D000B5B09BE85B453DCEEA6B6EE27E8F777EF2
+:10F4E0004C47B93245D063246818B86FD5612FE90D
+:10F4F0000335C8DBA9C10564778CDFCEE4D174B4D1
+:10F500001661F07D00E5726B325EEA1A82DBA77548
+:10F51000D3DD86EA701DC5DFCDFEAA66402284F3E6
+:10F52000E93CFF887995D8CEA7B3FE96753C29CBE8
+:10F5300074157C80F967F75AFCB391FC31A7FF750D
+:10F54000BAFED67819FC58F648F1662CCB9B9FAFD3
+:10F55000C1343CE6875DE565FBB3D51D6FEA61E329
+:10F560006E2DF1F3F332E1877515F7125F0C14ABD2
+:10F57000A45F40D5CB175BE260B709BB32E0BD8B1F
+:10F58000FC40B564F6611DF1DEA6527C62B3C4E3B3
+:10F590002849B60FA8D776CE7DE3DD5BD8736F8997
+:10F5A000B7D0CBE451ECA0DBC073D23B045E4BB4CC
+:10F5B0008A1A667131FBA2E1009693756667B0B254
+:10F5C000AC6CDB012CDBBC2534DF99B1876B50962A
+:10F5D00078E773FB4F99E64EADC3FDD3381C23D1BA
+:10F5E000999AB39D9F6795AAAF23BDA1557E521EE0
+:10F5F000A2031FD2814425D18F2F1224BDE1C30362
+:10F600001FACAB522AC0DE474A0D09F333AAC3DB55
+:10F61000E97CCE97B6DBABCC2FBD0DF11AA9B7EFC5
+:10F6200077C0BB93E06B97789CB62B5B7FB686C1A7
+:10F63000DF9557928331168C633458E4CD76A14F11
+:10F64000AFF0C9A6FE2779E343DEC81BB27718FDE9
+:10F650006F9727227CDD8072CB77733720BDFB3418
+:10F66000B69B686F7F2749F46FDABB3708DEAA2D97
+:10F6700069A473B1F7239564DFFA5A7E92117FBEB5
+:10F680007E058CE923E3353C7907E97B2871EB683B
+:10F6900057B4E86EA327D339A047F81F981F82F00C
+:10F6A00088FC902E810FF35CEE7D336F4A9C07DF60
+:10F6B000900DB6F3C11BF22AC78E668FFB987F9818
+:10F6C000B0C0BB91CD8378E9F8A4A12E4EE784C0E9
+:10F6D000EFB37D5ADE43F7863F59AFE339E62C811D
+:10F6E000EF733D1CBFE3DD407EC27918E7988E5E64
+:10F6F000E997EB902FCDB8C89BDE1CC27F2C094A3E
+:10F7000033D92B2E536FC927CF269875B719CF241D
+:10F710009397EB35F6EF7EBC7F31B1CB7EAF69526C
+:10F72000B7BD7EC6767B7D4ACA5E6756F311B40BC1
+:10F730001A80E3E7AC5DF6F70D663CB096DFC7F0E4
+:10F74000B2994F72FD6BBBFF0A42FF9B71D771BD2F
+:10F75000E96A14AF456BED7AB540E8F90287FEAC73
+:10F760000C29140FA83E1C3984F6A319A779C5A744
+:10F77000DBE29F66BCC529CFFD47B7017B437E75A1
+:10F78000C2C3E31009E6DFB41489F8C6385EBA14C0
+:10F79000FDB9A564A7359F81F2E99037F1B197E2F1
+:10F7A000CEF6FB12EFD5A9BF90743E4FC232CF8D7B
+:10F7B00065C90BF8F253947F62C63B4C7F5E091A11
+:10F7C000711C6F73EC85E683186FFAAD07709CF3BC
+:10F7D00095670FB7B2FA9A712AE54B6AB3567CDF88
+:10F7E0008FF1427CCFEAD5C5FA58A2FFA75DE4D7D6
+:10F7F0006F10F46CDEE331E323519FD03F3ED32EF4
+:10F800004AFA453EAC1FEDDCB37631D96CD3733C7C
+:10F81000EE66C6D7A6F6DADFF78294ABB1FD3BBB46
+:10F82000312573BBCA08565BE2EF678AFD9AB6348E
+:10F830007DFB5256DF03A94AFCAE4485A08BD8213C
+:10F84000FBBDB13120D1FD82314794588AB59FF676
+:10F85000B8FD7DB9E35ED999CE7B668E787048811C
+:10F860007797B1F9B6E8CD12CACF2D4B99CCC2F932
+:10F870007D22CF78324C46FA3B5F09C6D288DFDF63
+:10F8800028A4373CAF9EF1D232D4E7CFF33C166DBB
+:10F89000A2BEAD96D5B57F55483F6901A8A8080E10
+:10F8A000C58FBF773206EDAEA178D46EB6AFA59303
+:10F8B000D0BFF602EA959FB0FDC57A2FF3C7B1FE1F
+:10F8C00008F3C7B1DCCBFC717CFE53E68F637D1F70
+:10F8D000F3C7B1FC47E68FE3F3C7993F8EF56F0698
+:10F8E000AA1738E359D6F8DE503CAB5F32E359280B
+:10F8F0004A3E70EBB4EF8371AD048F6B9D7A1CC3ED
+:10F900001C87E286C3C611F1C3776EFAB707F09E73
+:10F91000F5CA19EBBAF0BEACD765C6CF789E84990C
+:10F92000FF6CF2DFCABDD7D3B9B13BFF4833EEC796
+:10F93000DEAA207D8BC8ED4A68281F9DFE97E977D7
+:10F9400039ED5FB374EA233FDA01D3D14EEAA6B8AA
+:10F95000CF261794D1FD59C91F43BE70C62B4D3E0B
+:10F960007ED15792F1BED4601EAD88CF7820E5C518
+:10F97000B89A5B12EB14799E24C2D8109B919F2DEC
+:10F9800079C9C1F234C539824183EC2F89D96564C4
+:10F99000A7698928C6A13A47C89BBD4FF0675BBEDF
+:10F9A0009BBE37D199CFF3046A8B6251ECBF3E7F87
+:10F9B00066D49A476BE6F91E0ACDF4F65BC65B1374
+:10F9C0002A19554F294CAFEAA3E855C5C3F3DCD734
+:10F9D0001F98E3C5FCE54DC1E57D685F6D8A46E88B
+:10F9E0009EFBFEFC99647F0CB68FCEA63C6725C8B3
+:10F9F000ED5625EA25BB55C5F5970FB537DBB5FAAA
+:10FA0000385D31F6A3F85C20D84BED3C6A9CE21FD0
+:10FA10009E08D0B996C7CBF30A82CCBFF6DAE2AB28
+:10FA20007CDE1611F7DDA427E2D86F5354D5511CA4
+:10FA30006D2AAB243CAF17785E9F67EAFD18D91B8F
+:10FA40003F137836C7592FFCF5F54D6EB2BBE22D4A
+:10FA5000D9466D2EE56DEEF1E1F8C17BBD9807EF5B
+:10FA6000CEAF1A75DC0338EE8CD1C67DB5A6763ADA
+:10FA70008DFB331CD71D5AAEE1B8AE11F2F39F13C4
+:10FA8000707E5EFB92614EA3733130F56D2A6A3D44
+:10FA90004F76967EB413A70FEFB752EF5F80F9C190
+:10FAA0002A24EBFCCAF0FB0DABF6F1EF556D55FBCC
+:10FAB000C8DED9FA8994F19EC418BF24CE6B07FD25
+:10FAC000709BBD5228F8A950BCD7D15E2946BFD241
+:10FAD0006E5F4C3F6CAFCFE8B3D767BDECB4578CCB
+:10FAE000DFA0BDB244C8BB3E269F7972C5808A7232
+:10FAF000209E4C5523DC0DD0DB86E7992E85E7113F
+:10FB00002C11FAEA22A1CF82FE6C82BFB0C96FF33A
+:10FB100013CDEF6E1489F1C7D51EBABE1D856BDCFF
+:10FB2000B47F74F22FC72D7CA49AC4A4C30E6A308C
+:10FB3000ECF7562F72D8394E7BA85AEDA1BCCC02F7
+:10FB400047FCC13CCFC475E2FD5DE7FC9F755E7369
+:10FB5000BC1D4C6FA1BD627ECF80BEF7C5FA8F532E
+:10FB6000D3522C48795E940F58B8168C9E0C747C36
+:10FB70008ED8F761784B9E4B783B4F3C2B08F2EFC9
+:10FB8000A514D42A29BD98E789A13C59BC82AD8728
+:10FB9000ECE593745E6DB6CFC9EEA5BCB21DF5124F
+:10FBA000F71F93407688B9CF3B82FC9E4DC33952F4
+:10FBB0004AC6FECD25343FC15532B4BF0C4FC738BD
+:10FBC0009E781EDAC575F6FB400D0E7BC3A4878BAD
+:10FBD0001CCFFB7DDC2F32F9E09D392F4F1ECFE08B
+:10FBE000582925EB02CAE9EB490B7FB84E221FE2E8
+:10FBF000DFC7D052883F0E781FD5288F20BBFF2E3D
+:10FC00006024D9E08764ED3C807FF60F9C25B17AB3
+:10FC1000E3A6B33BBAC6E1B5C6811FA151E6D950F0
+:10FC2000757EDD394375FF2683EA11310F732D92FE
+:10FC30007CBF2DDF3760F0EEC43C02B44B0DD8A67C
+:10FC4000600EA6AC6D8B150FF5CBC17ED228FDE200
+:10FC5000B04DCDD02F68F663E8EA34BF0752822555
+:10FC60007F2F0B78ACF3AB88374D0FD27D9F05AA61
+:10FC700086E73F5F148E31A75A7702B6B9260EEF9A
+:10FC8000C7C06E33E19733C39FC2F7D6F95DA3C0F7
+:10FC9000FF97C6C7A9C6738BF79F193ED67CDD9820
+:10FCA00091D78B70B9E8BB1A7A50B68C73DBFE8F94
+:10FCB000287EAD5E06749F4775195A8CD179B97646
+:10FCC00027F9E16A76AD8676C04656473B60636F9A
+:10FCD00037C5A9CB4B6FEF42A22F4FFB01E5C154B3
+:10FCE000D0B2F7B071A76A2A66EC807ACE2119E308
+:10FCF000DEF015A0FB2459FBFDFCFB17C573EF4399
+:10FD0000FF283BDB4B71A040F6CCFBB8B1CBE3C185
+:10FD100026FC81EA23351827571B2086ACA84A29E0
+:10FD2000A846269B02740EE137F6DE88F73299E288
+:10FD300023FD44DF8440BD2AE2E26339C940975B7A
+:10FD40006B403F21F98C4AF1F7B17864C188B2BCAD
+:10FD50003C671BC2539E600348083F8F6B4D4DC8E4
+:10FD6000B1341BBFF25DDE0F7EC9EF11305FA2F12F
+:10FD7000B1E0105E4DB93256C4CBA34BEDF164181F
+:10FD8000606B66FD2B7FB9F87E8C278C1926BFB976
+:10FD90007F6D7E6F27EB5D883F46E79A76BDE11762
+:10FDA000DFB5F03BBE97303968BFBF37CC6FF84E38
+:10FDB0009CF48007625E37D9174BC96E30FD911DE8
+:10FDC000D810E3FFE3807FFFCAD97F26EF0F51EE03
+:10FDD0009F78FCCCCCAB64EFAFF31B9417E4617558
+:10FDE0008647C90DDE7CF6BC40E67191360954ACFD
+:10FDF0000FCD97A6F3FC0D52AC2B260DF9BFEBB53A
+:10FE000018E519C0DA1C9BBD6CE6ABAEB9B6786CD0
+:10FE10000E2BB386EE0D69488F6BF24AC97E0EE752
+:10FE2000F67F0DE5EB47FE5BCFF7A23CC53C87B9FB
+:10FE30004C286FEEEA483279EBF9B010748B5DE62E
+:10FE4000519B290EE6F970BCED79BAD57ECFD0086A
+:10FE5000CAB5384F514027BC5683D68EFDAAC17E05
+:10FE60009FD0F361BECD4E1F1ABFC8F63CCDEC1932
+:10FE7000EB772C461E3F007A9975FC89238C3FD97D
+:10FE800031BE9671FCA171736DE376A83C3E9A8CED
+:10FE9000F869DF9DF64055A0A63890374AFC3EC071
+:10FEA000E3F71BA2CD14BFAF01C6F08C4ECEFDE42C
+:10FEB00098C2EFBD01D96D50648FDFD708FA95194C
+:10FEC0004520FD9EABDABF1F361F9CDF13B3DB431B
+:10FED0002F21A3B079E550551FC5F13F0AEAE87F0D
+:10FEE0008D642FF7B502C58FE707FA6FC073EAFA82
+:10FEF000C0F75D1DB3459E6C01C0DF04F69E8FF711
+:10FF000003FBC4BDBE8E884C7889D78CA57B3AE6AE
+:10FF10003871374C42791897797E02FD61F3F7E525
+:10FF200015D8F21CCCD2790FB4C190E2A516BAE96B
+:10FF300093195EADF39D57D8A358D611F7C00C9A0C
+:10FF40004FD8B983F38DF97CF33D2FE24EE67C0D5B
+:10FF50000BECEB6B706BB4BE06C1BFE67CCFE3FA73
+:10FF600032E0F794F3C99C6E06E7BBC0BEBE068FB5
+:10FF700046EB6B10DF031E9C6FCCE79B6F83AB39A6
+:10FF80008176DB3689F3FF77373FDE81FBFA7EFD32
+:10FF90009A28E90361175F841D58BB8B543EDFA28A
+:10FFA000226FAACD32DF0E26070C910F6F78307FBB
+:10FFB00043A37AAA354AE5BDCCCE36287FA38CDE92
+:10FFC0003FD01AA3FAAED6D9549AE394CDE6DFA770
+:10FFD00099324FCA686FFF32C0FDC66DF9DA6557B6
+:10FFE000A15EAAF6F37B93B3BF0486C5FE6506F156
+:10FFF000011F9EBF5C0A15A8DB266FE770476AC722
+:020000021000EC
+:10000000A470FFFC1587FA5A59DDE372E9A84F196D
+:100010002FC433F9A98703DC0FF7B8B9BC87B9FC43
+:100020007B878B845E01A55E72213E2ECAA6F3FEFD
+:10003000C54B8C90C6F0B644927E532AF414DE6F02
+:10004000B9446C95D3CE8FA0C660E3460C2585DFFE
+:1000500031BAA4E87023EAE578E862F20FE2AC6313
+:100060000E1BE712A127AB5FF500E63BC0F96E82DD
+:1000700063C912BB3DBFCD97D6D03ED9561101DC26
+:100080009FC5F5F6F71E37E7C3B8E3FB068B4EF1C5
+:10009000BD03FAE656867C53677CF24040E4AB8AA7
+:1000A00038E40928BFAD165F164546FDDEC14D0197
+:1000B0002E9F4CFD369C8E393C7F10726C47EB3E78
+:1000C0008A8799F015A82909E57561D33E5B5E130F
+:1000D000432C19C3661C1E943D15E88738D7B343DB
+:1000E000DA933FDAF74D0A407DBDBF4C7CFF531ACF
+:1000F000BEEE5703F6F8EB0998F75C2964E21F1E81
+:10010000775D745889B5E9437831F1F0FFCD475BED
+:100110001166563E77DE0755DC7F2BB27D67D3FC38
+:100120007EF0C5837515540B3D5F749D9BEC1930B3
+:1001300006CA91EE8E9C13E0DF7B33ED97F46F657A
+:10014000B45FBEF8F8C6385B7EA71877A4FD72E6E8
+:100150001B5AEE8B0EE5C3637E89C4CFB10A30CF44
+:100160002DCC9F1FB3DB99B63CB7F5FB1F9430CE67
+:100170007717E6E359CEAD0B993F8FF1AEA215F696
+:10018000BC3A275C665ED5E07DDB794BB43D3A7DB9
+:100190005FB11B3F58D3B53D19074B1EA5798FD0D2
+:1001A000F4A79DF7079520FFCE5E54DCCB70C68385
+:1001B0006F94935AB18479AB296F352BA7E72466E6
+:1001C000E195F61B95641D3E57C6CE6D423C2C6DE5
+:1001D000F9760CE3775A6EE6B8F452A1BF6B829CB5
+:1001E0006E8EBAD2E3308E7D4D4E4D4D302F43FB97
+:1001F00096EFD078F347F86EFDD7823C6E7297D0B9
+:10020000E7CEF74BC4FBAFAE94E93B183E08A5A47C
+:10021000623C37EE9E4DF7F656ED8865BA1FF75CE7
+:100220003871B1151E5F29BFA70DD03B07F1B5F19D
+:10023000E3BB7B1F62A8CCF93848723447E1E35A2C
+:10024000FA7F2D386378FF273F7A91EE373F89F7A1
+:1002500059E6E2F6DDB300E3DF5BCD3A86E4B19E1A
+:100260006DD6BFCDDF0FD6672CA866FDB7220D3245
+:1002700022FBFD960B3A51CF6E95407C87BC6E01F8
+:10028000FA875B5DBCFD3F89F7F32F7CFBBEDB503B
+:10029000DECF74931FB855D823267CFD417E1FA95D
+:1002A000FF14F8BC45EC5B10F119F94CF8BC2513B0
+:1002B0003EFB738CEF209E7C9849C140F07DEC5D45
+:1002C0008BF9C6FFD00AB1ABD81AEE8AED7DF036B5
+:1002D000A0FE1D99F019CF313AF17970E5315A5FDE
+:1002E000A83488EE0D6C9C05344E06386E1D6D5F8B
+:1002F0009FCAE272EC93102F7384FDA778FAA2785C
+:10030000FEAF557DEF068DC991CEE2EEC64CF47D71
+:100310007788DBE5D923C4AB1F15F8FDBD16DF894F
+:1003200070B76BB7D37758DD12B71B36CEEE07C95F
+:10033000D2EF85106FCFE07E00E176CFE1DF470D91
+:1003400031BC638259A88AC3BF513F0298FF1D8AFE
+:100350001EA1BCD050553FF13B5D6928E07485FE7D
+:100360009A57D8678F6E59BA00E54C8E62D2E1F188
+:100370004EA41B65A84E74D493C3FBBFBCF578276D
+:10038000FA733B99FD82DFEB4816F0BC11E7FA9E49
+:1003900014F0DE13367E8EEB1B864F4FFF7DB7B118
+:1003A000FE5B27F17B39F3E5BEC62B912E2F0C9215
+:1003B000FDC59E375ABF93F307416F7F0872FB69F3
+:1003C000EB475E7AEFDC8F91E8F5D702DF9F835E23
+:1003D0007F9D89DE18BD1E71D0EB0790995E5FC9C5
+:1003E00044678C5E8F66C28BB3AE80B11DCF67D57C
+:1003F0003F2FD885E3A95F9EB7FD21562A7FBE39DE
+:1004000049BB19936CF750CD792AA4C45B418B7C0E
+:1004100037BFE34D391099C69D35733BCAB1D31828
+:10042000F704C2ED1CF7208E3B03E54B3091E9FB4E
+:1004300046DF0FF1BCF107C5BA46E29BE74EC13774
+:100440003F0D713A607CE30A9D06DFBC2EDAB37D76
+:1004500008854E8B6FEEA4D257CAF986AE2BCF1DFE
+:10046000CE3700AF74A23CEE2CE67C313EF44667FA
+:10047000B2C8C247F011BD5786EA24BF4D3E7A3B51
+:10048000F411F191B37F7884EF594D1A5C47BC1495
+:10049000D76D9CA5B5F3FB38FDA4B77B6060BF8723
+:1004A000F26C795EAB3F9934B8D9D007F87DC4A916
+:1004B000821F77A20F867ECE4C116752FB60716857
+:1004C000383F87AAD255D6EF0D1C12F37F1A8A57F0
+:1004D000E1FC3DD03F05EDAF91F6698E98EF7BD9F9
+:1004E000C69C50063A3F951EBA3CC4F3372F17F30B
+:1004F000E67CEC6D46FBD3C9EFF357FDE39B0F8C15
+:1005000032CED744FF8B439F9BFF2F0E65E6FF251E
+:10051000213BFF57E1773A33F0FFD74299F97F69E2
+:1005200026BC7C017E6F0A65E0CBEAD3C4F78F045A
+:10053000BE7FF405F1BD51F46FFBFCF86E1B01DFCB
+:10054000EB108FA781EF8D23E07B5388EC95470854
+:10055000FE901EA43876D72CD82B956484E376EBD6
+:10056000385E9D8FC3F0FE81C4E87EFE9FBB62991A
+:10057000BE4FC3FAFD83157EB3DF9C90B8270DFAFA
+:10058000F5E89FDFF5E520C5FB997EBC27F497953C
+:10059000FB0F8632C8FDF93297431F6FD9DB89FA0A
+:1005A000FE0B8CFF58263A5B2DE03E955D7058D0CF
+:1005B000075BF7E3A1BCE1F2AF47FC9ECA3DE1C493
+:1005C000C110F957FD0B515EEDFC568E84F1A82247
+:1005D000232DA19FF073A1C72A433ABFCF20FAED84
+:1005E00054D312E6B3EC6CD624BC6F6419EF97A118
+:1005F00019238FE78483C1D7172279673C8FFDE6E3
+:100600000CD9819FC94E6ACC367E1B22BB2DFE0AB7
+:10061000C9ED33EC72DB5C871CEFA6BC17DFECCCBA
+:10062000BFF7F2F3A02AECBFF86B56F97F34A409A8
+:100630003F948FF759F50F83EF9D10D72BFF8DA5B2
+:10064000133E275E4E056711EA793EDE4799F49422
+:10065000733CD36F35F7C98D3AC912D7718707ED4F
+:100660005E5718E549874CF790160979B26876B657
+:10067000B0DB353F8E7F978893DFB5E2F66A3CEFBB
+:10068000EEB959AB4014143471BDA7AF184FF14FF8
+:100690002D2CD9CE93CD72B0BFBB770A7E9F9CCD57
+:1006A0001BC179CF9D0769F41BB3D06EA078844637
+:1006B000BFF795E3E98E62FC74A3D4DDB81CF5EABC
+:1006C000C220BF57125D728AEFBCF1F893B96E88F1
+:1006D000569DA27D1BB5D702DDF49D8CD36EEFE94C
+:1006E0006ECC945F32232C9B788D8D8AD76884E200
+:1006F0005A267E87CFC3F7AF3ADE2C21BE435592F0
+:100700008657AF428C4ED05E924BFB289FE92B550B
+:100710009C5E80F925A37F67A3D3B4D7CE0BE77D7A
+:1007200071B8CC7623CF27DA39EE2BE0B917C5673D
+:10073000835C8E5143567FEF706EC6B8BF596E68AA
+:10074000D58A549775FC148F430EE64FC7A2686F85
+:10075000B500A747887AC90EA3EFB95BF6F39A30C4
+:10076000CF73DE99155F1E26F862F4FD42D0B4D334
+:100770005A0FEB772DEE2BA8AC5FE8F4FB8D5C9A5B
+:10078000BF7317D3E396EFA599FC3A369104FC1E8C
+:100790008DBF1C3489ED7F24649E13723AB8336890
+:1007A000D69374481E2FEDE679F9BA49275CAE68F6
+:1007B000815E43AE00D81EAEBF203A858D579A8821
+:1007C000E2A7F759FD2995E42FAF03D43F7588F4CC
+:1007D0008576A614637A4AAD7BEAF038E057A5C85F
+:1007E000CFAD7B8AE4DD601DD298CFDCE31FAC1B6C
+:1007F000DE28AB970CD69358DF29F4E4F670DD536E
+:10080000EDC4FFF13BACFC512DE8F02F4D7F3D7A5C
+:10081000BB86F70C925195ECAA8D0E7AF8E7B09B47
+:10082000F05FA525EE477A5874F3808A5757BCC508
+:100830009110F2C384E80749FCCEDE8479224DB5DD
+:10084000947FCFA127BA96F8B207F705785A02C667
+:100850002787F62795797FCA52B43F7E9DBF97B10F
+:100860004EFE368FBF05CA383F6B1E1EDFDB27E406
+:10087000C9536145945CBE6645DBC99FF2D6C91475
+:100880003FCEAA936D7A837E298FDAAB367AEBCF8F
+:10089000491C0C5BE523A4E3656C1DFE29911C3CFF
+:1008A0007FA92E53D7A2BFFD7D61FFB17DBA97E42A
+:1008B0004545C49FE0FBF64CC67D137839D5BEBDD7
+:1008C000D89A88D5BA46DEB74B2FE3F9F4CEE7BF06
+:1008D000137838DEF89FDF437659E91DA0EF7E7765
+:1008E00095B6511CD68CBB7AF656A70BF5A17CC0E9
+:1008F0007581F03C2C9DF3BEF8C9DF6B744FE42387
+:100900004FC6F324258BE3F9486B23F5631B4CBFDB
+:10091000D372052E85E7B1D9EEF199F7112E074E66
+:100920000C4BE2CBBE82726879A342DF77B802EC4F
+:10093000F914979B795F2D667E1CCFFB4A40F60227
+:1009400064C36549C7EF4C406C01DEB71FF6FB136B
+:10095000E27CEBEB8EBC89AF362E8BD58A76EFD35B
+:10096000FF5384BF253A97BF4B62FC3B3F97C42F90
+:100970008BD55ACEA35FFA54C99837191FC4473C88
+:10098000563B69383E96C725B7A69F1A2FA78B8777
+:10099000656AC5823C7D381E9CEB6718DB8A78FE51
+:1009A0003AC333DA9D23E183B5A3FD78E932857E2E
+:1009B00077668152EFC273902B1B243A6362F80D65
+:1009C0008BBCB8FAF32DF03AF1E8C4D7954F00DDAF
+:1009D0001BB8F2BB218AB7BD60E2277D2E9D5F98D0
+:1009E000E72796751EE3F95B1AAD73F1EC8A5FE0B9
+:1009F000F71512ED4CDAF2F5DACE019733CCE3BD00
+:100A000005B6EE6323ECBBED3CD0099F137E9FD06F
+:100A10002BCE733150D3E5A807CFCF12E763D32095
+:100A200026CEC7B2281DB734B3BC757E97CEA4B30B
+:100A30002B5A1A06E7C5F125480CD635BCAFF5B4DC
+:100A4000B2F512F6F73551FEFB87F1CB723BF0DDC4
+:100A500022307F97C8A0F3A62B04FE1A98C787BF41
+:100A600099762E134E78AEB7C8F0E941CB3ADFEB5A
+:100A700096EAC43DAAAC2553B15F72BF326D38BC53
+:100A80006BA2FC770E191D7E60A543DF24FEFD5985
+:100A9000275E4C7C350DE165DA67C1CBEF5171E61D
+:100AA000D1790DD9B9039297EEC39BE738ECAF49E2
+:100AB00037139DB764150B3B80AFDBFCCE1740337B
+:100AC000D9F74BC57DACA32E687C38C8CF752A2DCD
+:100AD00072EB3B39D5B76459FC63F35CC7FCAE9449
+:100AE00049CF977B836985D3A1EDBB5143794C09ED
+:100AF000CA6352B256E8888F2E7C3587EC9EAE2CA6
+:100B0000F49F03FCBCCAF7F4A35D97E843FBB7E985
+:100B1000AAC7BA67B0BAFFEBBF4ED2A07A0EE12DDA
+:100B200024F6AD5AEC9B099FBF9C3FB7EC1F8F9FEB
+:100B30009589F899D8C791F484B98FE6BEA11D852F
+:100B4000F4EB2B53FF9CE9F7FAE050D500F2692251
+:100B5000AA520E5D427AAD83BEC705FA4E3C7FBFF6
+:100B6000A2C565FB9DA604DED3C7F61B7DC22F89F7
+:100B700051FFE5F9BC3F9471BB7190EE93ACBF257A
+:100B80000F08BCE131B86FFDAC2FE689B1F1C6A00A
+:100B9000BE872ECB3C25C3E71D713C473F65F0DC8B
+:100BA00024168B59E4F5BE2C6EDFBE17ADEA9533E3
+:100BB000C45FCC72B937B748B5E4871DCBF736664A
+:100BC000FA7EA939DEE0F7E506EDC481A70ECD1B5C
+:100BD000B2133777BC65B713936F7D213BB1FFB676
+:100BE000B79E6A67FDFFF43B0FE9ABF7EAFCB40F71
+:100BF000B92DE7C17FE07D5B157F0390EC7BFA3E6A
+:100C00008EB7A590D623A90C73F83B627A4C427C30
+:100C1000BF891FF3C5B88A0EE910032E578D498886
+:100C2000AFDB853FCAE86C8AF53BAE6F66713BC3AC
+:100C30009CC7E38524DE3336C76574D04679A5F5B5
+:100C4000407AC43C8735F9D91CE74496DD0F3E0D48
+:100C5000FE3D91897F9F959BFFFD16B45F9F5128B4
+:100C60001FF46FA337D1F34B5BAEA4F2B2966BF9CE
+:100C7000BC62BE6F4A8993384E5FE3AFFFF64646CB
+:100C8000AFABF77AE85ED9CA6FBE792BF2A7B7850A
+:100C9000ED3B6BFFBFCC8E383800800000000000B9
+:100CA0001F8B080000000000000BE57D0B7C54C585
+:100CB000B9F89C3DFB4AB2BBD9DDBC96BC38E11902
+:100CC00025C44D801010EB86575109049F51026CCA
+:100CD0000884008104A4BAAD1436246040ACF155F8
+:100CE000F1AA7451ACB657BD4169E5B6D16E442D39
+:100CF000540AB1BED00A06A516154DE45156ABE50F
+:100D0000CEF7CD4C72CEC92E84DAFBFBF7FEFEF196
+:100D1000D77ECC9939F3F8DEF3CD37676F5C587521
+:100D2000FF986442CC430D4E8910D29C45CA5B6D3E
+:100D3000B4DC209501DCA898A7EDA4B0CE5132D246
+:100D4000398690B3F0773994276399781C0652441A
+:100D5000C84A2BFDB742C89943B77BE6D3FEE26D84
+:100D6000362F7D42FBC9B9CB40CB64AF4C1EA740A8
+:100D70004E20F3CAF228B43038D069242405A001EB
+:100D8000611A40DAAF3542679304EDBCDE7A3ABEB1
+:100D9000D518244E8011233E374B747E79BDF31154
+:100DA00050F4678DC8848C82F1F4EF9BF139AC0B61
+:100DB000DE9793D83CC4FBB9F0FE1880621E096C24
+:100DC0001E49FA7E1CECB94CEA014FFA7934254EE3
+:100DD000CA73A6009E7C230112D2692AB31332D7AC
+:100DE000F68783523E85565B58A690044CC73B73EA
+:100DF00009FE9D1D04FF5FE1FC78042112E994CEF9
+:100E0000D2A1677C23850752FCC595C8A17539140A
+:100E10004ACED2D1A369B3129317F0D93124D93E67
+:100E20004835FEE540453AEFD78D4E3BCCB36C8A52
+:100E30005C16CAC3EE53AE857EA654156D62C359C7
+:100E4000492A21F3D8BFC9EBCAF6E641B43E1834AB
+:100E50007987523ACEB3064330BF79C418ECB462F6
+:100E600013E9AC84503116F1F7E87CE74D967D71BB
+:100E70000E4D3B7296CE9334919787D0FEE74A7C15
+:100E800080202DD3F70EF3E207934F5E07CBE824C3
+:100E90004EF320DA7E6E67E574928F5536E0A785B3
+:100EA000BCDDBC80E9684FBFF47F95416D797E71F0
+:100EB000C1AB940C142FA169A381CF2E32209F5572
+:100EC000356BDB2D7CFF8A4F8803FA351EEDC13769
+:100ED000CC93DCCDF8654AA353A1781AED54B03C0D
+:100EE00063F24793092DCF24E43AE877E664D919F1
+:100EF000A6AD37070CC44727BEDF278724BAB6FD47
+:100F0000B99D7B2F07BC159B94C761ADB9E4CE6B2F
+:100F100092A17E9413F05C06CF06607B42A09DC731
+:100F20001A1A4A9F75F83EB255A9F86E7FF1471715
+:100F3000F929BDB61A484D347E22A401E9FAF28F90
+:100F4000E2B19F0FEE9342163AFF29F2377F1C4B16
+:100F5000E753F56393D7A2E0B20C40D7E95E268F42
+:100F600084F86C53283EE71256FE88941585E9F8FC
+:100F70005505874A2CB49FAAF512CAA9C03FC5F7E8
+:100F8000876ABCF9EBCB12C30AE25DF39C76660676
+:100F90007EA678FE30069E3F54E339F0FEBB235F09
+:100FA00056B5BBDB694F063E2785A4F02C45CD69BD
+:100FB00032217114E9BB6E01CFAC3D38F2E5A1845A
+:100FC000DC477C5B50EF904E63D9484A2723F145BC
+:100FD000D303A50E260753E4E3489F13C5B202F8D6
+:100FE000DA1FF8D446398CECFF469E0678263E4A36
+:100FF000EC71BDEF3DE334E37B5BCDC40778DE9A53
+:101000006E0D35D0AEDA7F74715A27D247796002FF
+:10101000D0F10F26F2B8127BBEF6804C8650C62C5B
+:101020000D480805FD0606E28871944A5F91E8F3D1
+:10103000FF1DC8319D5ACA6A6250E8B8AE20F185DA
+:10104000A2F08568B7CCDA3DD548B07DD845E7B782
+:101050005C318424BADE0289F1B3D554EFCBA04DC4
+:101060008D6DB3821904E621E33C143A3F239D5F62
+:101070004E2001CB8302490807075C08870432B081
+:101080007E686030C261811C7C3E3C3002CBB981FD
+:1010900051082F0A1420BC387029C2118149D82E5A
+:1010A0002F50827064E02A7C9E1FB806E12581598A
+:1010B00008BD81D9585F10A8425818A8C4E7A302F8
+:1010C0004BB13C3A703396C70456202C0ADC86702C
+:1010D0006CA0116171A001DB8D0BDC81E5F1817BDE
+:1010E000115E1AB81BE184C043580F0A08F010CFF4
+:1010F000E5F10E6581934A0A70B8027C1C4BEEFE46
+:10110000C1ED52B5D3F731F09D68673610BFBABD57
+:1011100068F735B71B2EA06B94FE4E73FDFC85F768
+:10112000C39F0E27BD746BF6349411B9975E969DDC
+:1011300025E10CFACFE5BB6611D00B243759C3A7C4
+:101140007DF5035BDF5FB8FEDA6AECF0C9C0BFF57E
+:10115000C41BA48F4A47BF2E413FDB14E3B4501495
+:101160007ECB7799705EA39D7E938BC2849CA32FC8
+:10117000833E991974FE7122F04B5EF21F26D2FE57
+:101180000636196004AA4A9CED13A9DE512613D431
+:101190008BDB084179DA16AFB5A7C35C0C1F84B4AA
+:1011A000EE1984F234A490D99FCE2B40BECC3F1AC6
+:1011B0004436E580BC852523ED2FB89290C785CDB8
+:1011C00080F61BE6FF1CEA7BFB33337FA199BC64EE
+:1011D000A513C9695126C65138788BEFA538FACACC
+:1011E000D0907F623C2D0F7F32F812C08B5A431390
+:1011F00013281CB12BFC1235A76464B873A28D961A
+:101200002FD94376035A0B3A9449765A1E75D0B7B4
+:101210009BB20119D3E99FE450603EA146079DCFE0
+:10122000D6C3C4DB40CBC5C75BE444A2A2BF99F8D8
+:1012300077A8E8621FDD313989FE337395B34086A4
+:10124000F78D9D71AEBCBEF4D906EB8675523BF2AC
+:10125000385D57A62F2C39557C72B54B1274280275
+:101260003ACC58DD6D84756E6B72DB917EF1CE12D7
+:1012700018B27B0A713EAA001F1B114FE6F583507E
+:10128000DE05DF51FC5E34CBAEC69B24F45A4D6BB9
+:101290005E6CFC5EFD6F86DF23C06D6362E3D70A80
+:1012A000BC32EEFC725CE5EA91E379AE31B1DB353C
+:1012B000BB983ED5E3799B81ECA1B68A8E4BF9941D
+:1012C000C91509D2A68D9CBFCF87D71FBB985DF9E2
+:1012D00077C1EB4D2EA62762E19528C9A82729BF23
+:1012E0005E4406C7D637D05F34FB758FAB8F9E3315
+:1012F00083BFD8ECA47A6E706C3D37D7C5E81D5318
+:101300007F713D63E67A5C8CF7334EB7038EB2474C
+:1013100080BEB6F58620C85909B1A35C104F32E7EC
+:1013200013673CF0C974D95902FA860C27E847279D
+:10133000E48582B04F1918540A6568064A19F09876
+:101340009E1BDA44BBCEA17E8691D29F761506689D
+:10135000559C86F974DD8942DE9C951EB5BC097BDF
+:10136000DF2B8F822FDCDB36E5307E9D45FD97C37A
+:101370007CDEBDFD48D86EC30FD3B76D52E9C16D99
+:101380001E0F9645FB58FCFB8DE0DFA675C40FF2DF
+:101390003121BADF70D02573BEEDF6019F07BF473C
+:1013A0009CE0CFB89A3E44FDE4A2FA4942FDC4C68F
+:1013B000CF0CC4FF3C48CBEFB852B17FC0E3F5F689
+:1013C000FF77FCFC948B30799AE06C9769FD406A5A
+:1013D000871490D30974EEA3015F66A4BB42181D65
+:1013E000950924047E2FC55BD800FAD7600F819D34
+:1013F000319B5B7C20CFC4ECC2F51F70F83F769D1B
+:1014000043DF3813940220EA99BBFF3ECD46F96FC3
+:10141000438E331ECAA76879B3878EEBEE24BCDCFB
+:101420006C43F9A17FE948C530DD1B807D14659FC1
+:1014300015DA0FEA2907A1BC157C92F1B47FD7D742
+:101440007B9A2862CA5DBED3301FCAD76700FA866E
+:10145000D30DEAE05E7E3E9F3F20E4B3579E9C059D
+:10146000429E2AF3501F4AEE94DEFE62F937BFE532
+:10147000FAD3ED6630967F23F8FE82FD1B3E5FE2D5
+:1014800056CEE9BFC4ED7D63CB765A5EE99195A354
+:10149000D4BFB3A7BFDD61A4652BF5373FA2658339
+:1014A000B5C308ED4AA984DA28BE7DD4C983FD8777
+:1014B00075342BC31FEC3F4EB448D398BE5612AFC1
+:1014C0001D792E3C86703D2B3D661C2F6EE89044A6
+:1014D000902B07E72B62944260C71DC54EE37CEC5E
+:1014E000AF935C4DFBBBC4CDEC82906BD05BCFE681
+:1014F000815E721B61BF6EB192A0DDDDDB3F941394
+:101500000B7BF513E1FBB89BF99EA9659D3771082C
+:10151000C8E97E16476959C3E4B2349384D6819EE4
+:10152000F011C549DBC711F1470597964DBC34FD55
+:101530006B89F8E8FCF77D2D23948690B09DEEF73B
+:101540004ABD5218F68166833504B6B424DD4ACC10
+:101550005076184216908F0F255CA7B9302104CA27
+:101560006F727A7162275DC7C97DBB6DFE28F4BFBB
+:10157000C15FE99D3C2A361E7BDACD79C509787CAE
+:10158000486972821F19F41831EEB0119AAAF4FA60
+:101590005C37F347A83F540E7C3A6341779319E8D0
+:1015A0009D938CFE1019E246BE1DE0D9B9B1044CE2
+:1015B000562DF34FD349A841ED5709FEEA74FBE7D6
+:1015C000BBE93C1EE276848A65C73088575D94EC9F
+:1015D00006BFB4A42EBD0DFCDD07D712EF0213EA3F
+:1015E00083EB605C5F526B01F0EF43DE9DBFB80B95
+:1015F000F069A1FB62D0E3A30ED9144AAF8A31BBD4
+:1016000053603D7FD4CD5FC08AC01AC48B7E1FBC9F
+:10161000D2CDF7C1F9241FF6C127BDD7248691B7D3
+:1016200092A2CA7745E036EC47EC87DF3785B39C5A
+:1016300051E5508B6F317E85C4F6B5C42431FDC7AA
+:10164000ED28D52F4DA8074204EDA6CF223D0AF67E
+:10165000E6A4779417EC762C7D23E643F138B4CCDE
+:101660001EA55E2265D1F4C45637F30F2A4C74BF11
+:1016700040EBA51563EA615E15769B047C27DA6D65
+:10168000E2ED043F8B78959CF8CD18A03FC407A3EA
+:10169000AD7F1E319E52C7A33681ACA5307C79A3A5
+:1016A000F82BB1F075D0D4520AF33AB850260DB4E5
+:1016B0009F93FEB16924CAFB02BE077C43E9B22AAC
+:1016C000898DD743CF21D1F177706D8D77B2A997EE
+:1016D0009E7DEA2BE3CAC17E97031E55E31E70333D
+:1016E0003B7F8C4362F12B4E5A6F9E7FBF938C04DD
+:1016F0003D756A4CD00E71B1EE5F3500BD7F6CC791
+:10170000784579E5E9310D2355F82C266824E7ED75
+:101710007ED0A9D0E7E5439B5282B6D8783C0678C4
+:10172000A478BA031E8CC378CC1FDC17108F2179E4
+:101730006EE437B23BCE1B8678E45BB217FC06182A
+:10174000D78FFA93C5935739D9BCE2747E5E79601E
+:10175000B946BF244424124A52958DAD189F4D8836
+:1017600018F1B95EDE9ED2C99BC07F2C7A0AFCEBD1
+:101770009FFF9EF3E5C1CAC50AC40DCDF1D1FDE0BE
+:10178000EC2449C3576FAFF56BC67BE75B59B35F7A
+:1017900016F0EFBCFF93FE716910AF2A370787F68A
+:1017A00047CE057EDEFEE60127F41BF79525AAFC51
+:1017B0009DE2F689DAD3E6EB14953DBD516E02BC8D
+:1017C0002718B97ED3C99D0FEC2AC5E7E56057E914
+:1017D0001413CE6357E791603BC491F5E30B7BAAEA
+:1017E000E72F615FF574137CE049A2F44BE8A59FF5
+:1017F000881BC6922F21579D5CFEF5F8D7C31BCCE2
+:101800005ABF47C0CFB99C9DF4C79120D58F379759
+:10181000C82122217FA07D3C78BF84FE66B8D28299
+:1018200076B9AA320EE3B3550532D657DD29A3FDAA
+:101830000C53FD504BE7F347AE27F4F1D912227950
+:1018400027ABD63D63749CA67CE3C27BFFB816E24F
+:10185000CBC52605C6DBAFB07873D027A3FF4AFB04
+:10186000F086213E7DDF655EB067821FF6FB6494E3
+:10187000B7E09BB21786EDE0F1E8FDCD052119E850
+:101880002CF97BC6510643FF550AD0E15DCF1627E0
+:10189000E8BBB86F1F282BC3FDA35F2940BB499D40
+:1018A000553AEF382EA793D28BAF073BFEC1661394
+:1018B00081B8D107AB4FA23C77AEADF74E1EDA1B15
+:1018C0005F16F1617D9C591F5FEE1357D6C59305D6
+:1018D0003FE8F9A422067F087D158B3FA81EAB4A7E
+:1018E0004AB9703D26F4C77B7C9D93D2B7DCD940C2
+:1018F000F190B040463C08BE7CF79BDB1F013D1CCD
+:1019000047F9631DF0F3B74FBC02FB10B2588A1AB7
+:1019100047DEDE63F7285D727BE972A37F714F19A2
+:10192000C47F76CD8A9E32AC5F6F5762EBB573EBA6
+:10193000AD61492C5EA1B73B7A79F857DB9DF2CABD
+:10194000FB73E1FDF2CA8521801BD3AD35A07FF585
+:101950007A426F27C47CF4F34C88C824344A3D6F24
+:1019600005DBF5DA0933D607AC8E7C70D6CFC431EF
+:1019700018042710FCD2C371A1461CAFFE92329C02
+:101980007FFD588001E2ED0CC2FA3CF1183F68C9B6
+:1019900064EDE52BE2993F3EDA8DEB9485437ECAF8
+:1019A00085E546BE86516EFF734914BF8D3E431CCC
+:1019B0009C2B4CB21BF742C8A565A28158482F9EAC
+:1019C00084FF4E203240D78B7512EC3B0BACE6C146
+:1019D000E89FFE16FA216BE8BE90F2FBBE7DF2CEC8
+:1019E0006D7489FBBCA312A3F9E702CEF1FC10F5DC
+:1019F000C2F5812A84877EF04E36C8EB2D92FF55C2
+:101A000090838EF2AA3BE15CB86E978CE74A736EC6
+:101A1000797718DBA769CF2765873517E2288D52BC
+:101A2000BC17F488C063BBDD8CFAA5F110D3838D9D
+:101A300047245E66FB889779FDC9F7EDB8CF10782B
+:101A4000A7EB790BC6F7DDEBC2F5887DC677584F5B
+:101A500027E027F67A329DA82F80AFE4DEF9CB7617
+:101A600023AEAB8BC47B61FE011E0F22EFC7A1DF4B
+:101A70002CE85BC7F94FD07739A76F57DBE99F5C3C
+:101A80004ADBB7F8DC78CA2067115C6FD7FB09C85E
+:101A90001F62BD940F4EC1FC76B7313BD172D8CED8
+:101AA000F0652FCA85F909FFDA99C4FC64FDBA2BE9
+:101AB000C43E9DFB19E0DF429C62917BE2D9A431D8
+:101AC00051DA73BF96E2D9904CEB4B9CE45488F406
+:101AD000E2598C23C615EF3992B57E4C058F2BBC8D
+:101AE0006F22E5104F84710B55F35BE32E7124A731
+:101AF000F41DF73BD07140F239F9524BC73AA3AD10
+:101B0000594A243DFB620CA5297DE55C2F67525B99
+:101B1000FB57703EAF97FF33867A22D17E6F95FDDB
+:101B200007DD1436FA49A765705F79389F1EA1F466
+:101B30002E484EE9AB4FFA4BE709C952CF3E86D348
+:101B400079427214BD27F03DDC5DF63DA887F5674C
+:101B500014E23ECF0774073D611E84E3215F76BB2C
+:101B600048E851DA2889C751C47C202E1147DF9BF1
+:101B7000999C83E34A461234D17252AE5702BDDFBC
+:101B80000F3E98F92FE6839B92CF29CF61F44B96B5
+:101B9000717A2F1379163BCF9D67D10FBAD5C03A12
+:101BA000CE18BCDDFE9C0BA7DBCDC97DE4F3E6E4DB
+:101BB00073C8E770B7FF1618AFD14C4EA11F5E5C1B
+:101BC000E981F10E387C9F24D2E72F36707D924355
+:101BD000E946EB5F4996515FDD432E463DFC3D8370
+:101BE00001E7DF45F5EFA339D1F83E6874D3F7CFAD
+:101BF0005C4DF03C8EAE6F3DE3CBA004CF6F9D47B4
+:101C00000CF0DCA33410C305E8A196BEFCD9722EFB
+:101C1000FEA47AE85EA8A7FCB80AF8D1AA388DE736
+:101C2000D2433F4BD6DAF97EF0DFCFD478FE17F0FF
+:101C3000DF2FCFCD7F17CC57CF45D307828FC5BEBF
+:101C40002056BE10954792E1EE3B2E215E3C0F2BB5
+:101C5000715899DDDD21A19D6D3C52E0C7B2DD8A4E
+:101C60004A41D8E1133B59BD3C31BA3FD896EC66A6
+:101C70007906AD2BBC464D1E48109FDFE53BE11CAD
+:101C800042F5E254D986EB4B2A65F143B17EAA674F
+:101C9000A74F49E57153BA9EA42C868724EA0FC04A
+:101CA000399A83EF0F128B8D1ABF5FE0ED56B94C56
+:101CB00082B8B72B9940DA0DF5EB570F87F37B9776
+:101CC0004FDB3E856CFE52C64108CA839BDA6F88A3
+:101CD00063254DD3B5837D483EB4573DCFE9BB9FC7
+:101CE000F83899EF27CCC4037685C815E7E41BD5EF
+:101CF0007EE2F3E47EC4454E261BF8798AD67EB593
+:101D0000C691A871818614BE2F38E542FF57E6764A
+:101D10006B72670EE6A7ACB42B182F9065AF757A7F
+:101D20004EDFF75D3E035154EB4B9A164F14D5FE30
+:101D300021A5CCAD29A795A76BDA0FF00FD2D467F8
+:101D4000D45CACA9CFAA2FD4940706C66BDAE750AF
+:101D500001509707375FA9693FB4E56A4D79F89656
+:101D60009B34ED2F0ACDD7D48F787289A67E64EB91
+:101D70004A4DF9925D3FD2B46FE4715F3D5E2673C8
+:101D8000BC361A99DE69B015623CB2D1A68D4766A1
+:101D9000F37625891372210EDEF861412EE0FB6592
+:101DA000C7788C8BC7E20BBD1E8BA53FF5CF2F4BA1
+:101DB00061FAEE8B97CC069083E5BBA9BC5E42CB63
+:101DC000B6F736C09A9AF3D879AA91B0FC1E71BEC4
+:101DD00022DEEF395F317A597CD561239BA2F04531
+:101DE000768A1235FE29F82816DE1AFA89B7297C78
+:101DF0001DDF156FEF4B2C3F55ADFF774499D79AF8
+:101E00001416DFA2F6655E0AF37746C7A327EE44F1
+:101E100079BC50FD2FE641F5FF9214F443DF98732F
+:101E20002BE8FF9D162FECC9BE287FA3FA0105DA27
+:101E300057B3F6066F2ED02556FC7B4D4A9FF87798
+:101E40000D8B7FC76BF0562BE45D17876B747C8D11
+:101E5000F1EF46B337B73FF1EF5AD031294007C60B
+:101E60001F3DF4E5F1F358FBA000217B25D8F7D8FE
+:101E70008C0A9C739D6F5F4BF7B3B9709EDA02FBBF
+:101E800026D53E87EE6FF9FE260EED02B57BF7A64E
+:101E9000A0DE237B15FAFC0CDDF76E52A028EC9F28
+:101EA0004FE3975B88D76A96919E0FA6E07E97AC2A
+:101EB0008A93215E16DE3721E73BD9F3ED291760BF
+:101EC000CFC9F9CFE5D0EE94D2F5AF8BE277E9CF69
+:101ED000E17AFC6FF0D3243C8F433CADA77611CE62
+:101EE000E3DA53987D5E7F88ED93D71F99E541B97A
+:101EF00049293AE7395C7FF5CDAB297DFCD25753B0
+:101F0000CEE1978AF5AFE4FBDE29725E2BC41B4F4E
+:101F100044CC883799B0FCC8BA3D2612427AB23C0C
+:101F200063414753644307D86713D1E7152B89B042
+:101F30006ED31E19F5134966F541626D003F27B156
+:101F4000586BB75C3EADDD4A9AE6D6D931ADDD4A75
+:101F50002BD7DAAD017EADDDCAA829D4D931ADDDEC
+:101F60001A1898A8B3635ABB35B8F96A9D1DD3DA1D
+:101F7000ADE15BB476EBA290D66E8D7872A5CE8E75
+:101F800069EDD625BBD669EA0BC29B34F5A3F6DC16
+:101F9000A3298FE9F80F4DFB457B9FC3FC9BB1073D
+:101FA0001FD5B41BD7F94B4D3B8AF00EC8D35E80CA
+:101FB0002421E4D263CF6AEA17703FEDB2EEDF6806
+:101FC000FA212D2CDF3A48FF037AFD95F8CDE09CED
+:101FD0001849F7AB1994AECB4392374C9B2DDEB525
+:101FE000A308E6F1D9E12BF6403F8BB668F3B417AE
+:101FF00087B4E53A322811F4431DE58B10E593A52B
+:1020000090BFADD26B4B49BD03F321FAC9678BF684
+:102010005E4330EF33E8EB80FC74B14EC16F3ECECF
+:102020006F627E62BD4BA9DF17567AD7E9A3FFB175
+:102030007D64A719F8B67A9744FE43EABB9E9AB628
+:10204000BB37644459977E1D7ABF734CAA368E3DC8
+:1020500045B6615CFFC49BB297C507B572B8722FD5
+:102060008BE7AF7C5AC2F89A1E1FC22F8D85173995
+:10207000C8F60975C9241452C99FC2F161F168E517
+:10208000EF04FC03E6F3B01C82BCA038255ECF6FE2
+:102090004561D217CF09B95A39D5E3D9EE4D8FCA68
+:1020A000570AFD0FE6514DD8B9949EAFF4785FBE44
+:1020B000EB6E33E8C50BC5FB8254EDF9A0383F2821
+:1020C000A1AB3547C9831378A5FBF225A929B1F740
+:1020D000ADB7A45EF0BEF596D47FEDBEB521F51C7C
+:1020E000F1B32E889751BF521F2FEB1B1FDBFD95BD
+:1020F000E4C038348B7FF9BD5696AFA2B393B91EB6
+:102100008D9DECD9F77E28851A69E7F50E5F0BAC3B
+:102110006F85C37737C0990EDF3DA92AFC3452BCC6
+:10212000E0FD1C6AA77644F10FF7A50ABFA80CE3EF
+:1021300022EB4B587B7DBB5FA7B2FB40ED29451ED0
+:10214000F43B8F1430FB692F3AA7DF79173FCFB9E3
+:1021500003CE0B87F6E6F1DCC9CF55A8D8F9806E1F
+:10216000EB4D651E759EEF83A92E1CCF31EED90E67
+:10217000C8776E741A9C9202FEB301CF459B7CB661
+:10218000693BF3D87BC99AF7D8BD2319F00DFEBC83
+:10219000CDF8B59A6FF7515C42BFB1D6B92F95F91A
+:1021A000BB26E2B382DE15E7B9A60F0BACA06F8D9C
+:1021B00092D7192D8FD3C4F3A426F2F35CD9C9CEDC
+:1021C000777BE4FC3C7952373BFCAFA9F9549CEB9C
+:1021D000CE76F8F6C1F380316801FF32608DBEFF24
+:1021E000FD13A7E35DB03EA4A70DF908C797FB1543
+:1021F0003FF9732AC6E58298AF78ABEC3D06F1B99A
+:10220000FEC6AB3E4EED13AFFA58CD877AF9A3FE6A
+:10221000E72789908797986EC4ED84D19B0BFCDFEC
+:102220000CFF1E87F1D5CF61DD7DF24F1537CFA7AB
+:1022300055CE994F2BFA2977F94EA5B2BCBFBFA551
+:10224000B2BCBF2659D58FE33CFD503CE5D6DBFA46
+:10225000853F396D0CC6358FB160C285C5351D69A6
+:102260007DFC4747DA39FCC733878627C279B288B5
+:102270005BE9DB59034999EAFB31CD2EEDF81B0AE6
+:102280005979001F777922E3FB91698C8E220F50D8
+:10229000C4ADADD3890FEE3BDCC3F3B3453F23D3CD
+:1022A000ECD83ED53D71645A0A9CA749B8AFDCE032
+:1022B0009234FBCB4F524B46C27A86F3FE47A6318F
+:1022C0003EDD3688C567F479902778FB13A9131192
+:1022D00052825D04F834CB72543C16A6B1F97F9259
+:1022E000C8E45BC4CFAAEE67F7BB44DC4CC4010969
+:1022F000F1BE9D40F5CA479B4D04E25A0B65DB06D3
+:10230000E0C39EFB73FC5CDD49FF037B5999578654
+:10231000F947DFF5FE16E033C1DDD75E5E99D6E3FF
+:10232000A7782FF01ED7ACB40B386FEF8C677CDB2F
+:102330006DB7613C5BDF6E29E787CD3C4E01FA1A31
+:10234000EC865B26F5D1ECC7528EF733872C3EF432
+:1023500063A6C5633E8738FF3052FE4C74631A781B
+:1023600010A035909109F7897ACE3F1482EF25D9D4
+:102370006CF89E5121613B5C09357A25C82FEB34FE
+:1023800077AE4F83F95E2679E1FE405A85B33D2D45
+:1023900019EE112A28661B7288A318EA0B0C58EF55
+:1023A000BAD6B9C10479D70A81936C62A2E3D8E99D
+:1023B00038F7A6E5B07505AF694FA3ED12956E32FB
+:1023C000280FF48873AA07E4B89CE5AFEBD7D7C40D
+:1023D000F9D5B69EEE1B001F4AF43CF0A63483C824
+:1023E0009B6F047E2D51C84E762F8AE5A1429A3507
+:1023F000E60B7A59BE7402E41B0D667A06EA7FEAA0
+:102400009AB411DE13F225737C03DFABF3E1EFE541
+:10241000E324E9E453E0930ED000F910C6E904F98F
+:102420007A6645F4F93EC3E9BCCA51F620F0CFCC38
+:10243000090D98E74EBE397B562E02A797C9097D34
+:102440009F401C222E99E9DF3845417D4C9C12E6C5
+:10245000995A156F0D94E36CE39D32D83D0B3F2FD5
+:102460005C6020462A6F93783FBE72227D9CCBE24F
+:10247000AC4CBF1AC9C7422E648E9C22B09FEC8F11
+:10248000FA459B13E87A26D9F6E13962DC90FA1214
+:10249000B857F0CA3CD6C73D31F2F63FE17ACC2DB1
+:1024A000FB3D06F0E9837F79EDE50948E78BE1869E
+:1024B000E61DA6CED7F65CC6E3E7982FDEF99A2F85
+:1024C000EF9FCF2F7F2DADF3B5A6BCEFC2FF5E0906
+:1024D000F4F82794B160DE7AFE17FAECA0EC3F78AE
+:1024E0001BC5FF7594A90285008DA402E9CDF28772
+:1024F000AEE5780E7E4DF16CEDC5F3756D7B117F09
+:10250000074D74DE747CD344866AD38F12793E46BD
+:1025100008C7BDDEDA3205FC9B2E73773E8CDBF5F7
+:10252000C23B5941AA4F0EFDF8A49D50FEFBC0D8F6
+:102530006D87E7C756BF61F751BC1F5A2DE3FD37C2
+:10254000BC97ACCA07FA9CCBCB959EB2A3C057F3FD
+:10255000D67E5BA4F6B3492005EDEEE2900C777CC5
+:102560007BF4DFD2271338D3B1F2B2D6244D59D839
+:10257000E36596E8F7C40779985C2C7E6A9B19F2AC
+:10258000E1AFF4F8FF06E31FE3F906C776DA717FDF
+:1025900025E633FFA90233EC273F68B39030F0BD46
+:1025A000B1C344304EE59B2E51BEF5733ED4CFF3FC
+:1025B000D51713B0BF85F7CB1847AAA46305285ECB
+:1025C000FD6D8BD9FE56B78E858794A9A0AF166E88
+:1025D00094485061ED5753BAF903B7E3F98A7E9DE9
+:1025E0007AFB729AAC36831ED1DB9705C4DB3C01C3
+:1025F000EC568BF6F9A2B63BB0DF45E7398FF178A0
+:10260000F8FEAC888C3D3B18E2CC83305F3096BD41
+:1026100039B69609E5A76BAD088FAF75223C0ACA9B
+:1026200094E279E9AEF6573350AC3B8AC00EC5ED63
+:102630009D64BD89F4FACFC66DD7841F52802FB533
+:10264000F990151CCFC27F5EC4EF199CCF7FAE807E
+:10265000759E231FB2A29FF99027F68CB2C2F3F1A8
+:10266000021F63293ED0FEE61D50C8F9ED6F2CBC59
+:10267000C47A6F197CE7200A9E85DC1CE5FA7DC1CF
+:10268000F6591BD2E9041A5FF86B7627F2258B43C3
+:1026900088732AD9B3A103D62F135DFC2F48DE24FB
+:1026A0002AFED5F3E722E26576C7C6DEB3F2B84468
+:1026B0000F5FB6DD8978157C04370A0C1E80618FA8
+:1026C000A1B8EF7703FA7C1FA0455BFEC2D4990D39
+:1026D0007A63912E5EF085147DFF35DD3388AD5F22
+:1026E000F14D85BC8885A46C038BABB7A09E3A6680
+:1026F0006C79F53690E7ED4C9E963DFFF4AF414F77
+:102700002DF9AFFB1DA0A73E31B6A4C278B58FAF9F
+:1027100077805E3F660C3AE0FD4F4272D4FBBA4FC1
+:10272000787ACE056C9017B61C590C042C3803F43B
+:10273000E4DF1E3739218E5AF7A4256CA1F858BE64
+:1027400093E191968FB0F2ED88AFBA5D5A395CF2A1
+:10275000C4FDA90AEEE783191C7F19A0AA976F3759
+:1027600061FEE8F237652F0C5347BA717DFAF761C5
+:102770001E114AB7BA56B9D29CD8B79E7A3C669019
+:10278000B3BA9D8C4E753A3FB386EB653DBF3FE0D3
+:10279000E17E26E7738A178C87897C561262FAB924
+:1027A000F1170FE41FA1F33ABEFD358794D7CBEFA5
+:1027B00004B22EC12F6FAD9A077906B1F8FC0B2E2B
+:1027C000173D7A9FDB1965179D18F8FE6D0CD69A98
+:1027D000C28E4B293E6AB799BC41FAB8F669D967EF
+:1027E000033FE95D0B7EDF61E9D3AFBC3D9ECE6F59
+:1027F000E90E53F274B60C1BE86741A73AE0EFC24A
+:102800005EBA2C79EE1533E441C2F3D5EE5EFA2CB4
+:10281000DDD16E86BC4A3D1E27B5B69B997CE9E8A2
+:10282000D47A642AD8E5C65F9C31031F7CF2A244A7
+:10283000C085D4BF5FB3ED1507E80FC013D80F41B3
+:10284000AF1EFAF5A15B78C66F46633B279CD3C4E5
+:10285000A25F00E63206F9FB99DFD0F16BDEB378B8
+:1028600061FD35CFDCEC8075FCD558CFF8FC91F5D7
+:10287000A9608F6B4CC1542742F6BC66EB0F90FFEA
+:1028800016BDFE8354827AD33700E497AE7300AC52
+:102890006FE1C3D7E1FAAA891FF9AFE611B90CFCC1
+:1028A000C4D346322D9A9FAF0C60FAE9AF8F5A70AD
+:1028B00053F0573361DFE1F893CCF2F8C80AF443E0
+:1028C0007EC0D74A3531964F5B199D4E79C4FD7550
+:1028D000A6C7EA78ABBAEDB7A31EFB34CB9706F2D6
+:1028E0004EF1A08DA7BE3E258DEB3FFC5E0ABE4794
+:1028F000F96E123C87F61D265F5CBEE63D9ED7CA88
+:10290000C65FC5C7A7F38E87B8DC5F53B5FB570119
+:10291000670C107A807410357FC592FBED1B91AF68
+:102920004EBDC9F4CAF2D0AC6958DF610AA7417D37
+:10293000A8FD5A09F502F52FA2C9F57613976B6D1C
+:102940003D9DA75152E3F745762FAEFA3EDA4EE5AC
+:1029500087F4F28DB9F7794EAF7C8AFC8A453AFF4D
+:102960004C40BD5E481FA0B57FE27DF2704AD47B2B
+:1029700058BDFA20887C516B0AFDFC3F408EDFB5C4
+:10298000E03DC3DAA74DF8BD9CCF9EDAFDF64D942D
+:10299000DF3F6B15F2ABD5B37AF9AD79F63A124D4C
+:1029A0007E3F4B2E2351E5973E8F2ABFC92C7FFFD8
+:1029B0007F5BCF2E8AA167270FD0EA59EA4F245EAA
+:1029C0004A8B9FFE72E940DC67E9F02AF0A9D79BA9
+:1029D000873C0AE257AF37E9DF9B448547813FC117
+:1029E000974BFE73198ED3C3BF823F05FFF6F0A746
+:1029F0007EBD5A3CEAEBE3E0CE514A2FDD4DEBE8D9
+:102A0000FE1ACE5D5F90F1DCB54BE976B8212ECB96
+:102A1000F36EBA9CBCEC62E5EE14F306D01FE279CB
+:102A2000771CCB43E82AEB76B8547EFD9136D9016A
+:102A300079F59DA1E8F91298499102B74463D53719
+:102A4000F0EFD6D8B203B02F6B61E73D0B1A6E7072
+:102A5000803FDDD536786639F8F17B65F4A9BAE2B6
+:102A6000797E55D0671C40F15AC5964C8E91E04F47
+:102A7000C1CFAE6A5B3A1D368D0B366BF1516DBB23
+:102A800016CFB3AAEF33F5F205017F2764063FABFB
+:102A9000E661EDF325905705F4D1F1911FF828CAAE
+:102AA0003D8C3B051F159002B64FE6E7555CAF4DD8
+:102AB00091F3669643FEE21E764FE2449B4C36C08D
+:102AC0007A9FE2E757C114E4CFE5948FD571CEE346
+:102AD000C067C363DBEFE3BF3A54741B6D52FBEB7B
+:102AE0003FE73F44E1F15FBF3BECB7507EFE9DEC1A
+:102AF0003F93BEED27BDF8D55CCCA37CD142605F8F
+:102B0000D4F5E2EFB36F83F26F2C5E9867D73AB6D5
+:102B10003F0EBE6847BBDE95C5FCBFC617CEE47747
+:102B2000A27D6A427AED1AC0EEA99E68FBFB61099C
+:102B3000F2E9DAE8AAC0EEF27D57DD6FE2707FDDE0
+:102B4000F5C219CDBEF2BBAE6739BFAFD46527E57C
+:102B500070BFB8CBC5EE77D6FD76DC63705F71D9F8
+:102B6000CE767315AD9FF4BB6FF341DF743DCBFCA4
+:102B700009EADF6E05977AF780039B4D14CF5F80DB
+:102B8000CF974EF71FE989A5700FA32F5E181EBAC5
+:102B9000281E605D142F35A02763E1E3BD01ECFE24
+:102BA000C8BF1F3EBE9C0BE3D7B68D25104FEFC5A7
+:102BB0008BE463CFED987741D7CF9EBF78261FFC7B
+:102BC000A3F3AD37F2FFD97A53D3FF5DD7CBF87DAE
+:102BD000EB00667FF47CDF97AF9FBF05CBCFD8BDFE
+:102BE00038DF7ECA7B51FABFABBCFFEFD0FBDAFF08
+:102BF000B3F4DECBE96D77C2794AD70BDF66930B6E
+:102C000058F7CDFF47D7DDE3E718BCD6D1747EEF88
+:102C100091D0752552EC3CCE50BA761F3183FB1112
+:102C20003392ABD17F98E163F1954652B807EEA994
+:102C3000057D329E3B60320DC543C7B50521CCDB17
+:102C4000320687FE14F2B8AE5FE665DFF9D2EEAF6A
+:102C500066A44E9B06FEDBFE063A2FDA6EBFDDE071
+:102C60006CA44B98E993D1DFA310FDBCB7265E8519
+:102C70007921338BB5FB8C9B74FB861BCAB5F5D7CA
+:102C800093475320FFEEFA1A13E60B5DA76BBF269E
+:102C9000DD89EBBC81D4AF67F1990BC353473ADBB5
+:102CA0004FF6C5C3B9F1D6074F7C3F89B93C4A5F9F
+:102CB000BC59FC6C7F69A115DCDFE279722BFB85C6
+:102CC0004FC2F79D163EB4C0AFC5C7BED7A9EA171D
+:102CD000F122F07EA1F81674D2E35DE057E04D4F8B
+:102CE00087C7E04C42E58FF7429147E227EA7CCB69
+:102CF000193D7EA30DF178603BBBAF70A0B86A733D
+:102D000001949F92D05F3B3D6114B1D2F5EE3791B3
+:102D10005DECFE974F7116F5E6B348C5BFC7730566
+:102D2000C82754EF4B219F50BD2EC8275497219F91
+:102D300050DD1EF209D5F5904FA8AE877C4275197B
+:102D4000F209D5ED219F505D867C42757BC82754E2
+:102D500097219F50DD1EF209D5F5904FA8AE877CD4
+:102D6000427519F209D5ED219F505D0FF984EA7A79
+:102D7000C8275497219F50DD1EF208D5F59047A82B
+:102D8000AE87BC417519F205D5ED2F8FBCA42997EC
+:102D900090D734ED2759DFD094A738FFAC69FF7D79
+:102DA000CF479AFA2B94CF34F582FE57E59ED43C58
+:102DB00087338B6011EC63D85FA9F7EF9A7E8CA400
+:102DC0000CE3CC66528FD00AF15B0AE3492B421B1D
+:102DD000157380570EF35F9C01FCBA35B801986BF0
+:102DE000FFB833D9A0FF0F4CB886C51FF839C14CC6
+:102DF000F8A7429938E19B4CD8D78A734F474426AD
+:102E0000E151940F2312426724818493281F46E2E4
+:102E100010BA2349F83C29E242981CC9C0E729911D
+:102E2000010853238311A64572107A2223100E88BD
+:102E30005C84303D320ADFCB881420CC8C5C8ACF96
+:102E4000B322E310664726E1F3819112844AE42A13
+:102E50008439912B100E8A5C83ED064766211C1283
+:102E6000998DCF87466E44382C52857078A41261B4
+:102E70006E6429C28B228B115E1CB919DF1B11599C
+:102E800081302F721B3E1F19F921C2FC4823C24B0F
+:102E9000220D08BD913BB05D416423C2C2C8BDF89C
+:102EA0007C54E46E84A3230FE1F33191071116459E
+:102EB0001E433836B20D6171E43F118E8BFC02E186
+:102EC000F8C873F8DEA5911D0827447E8BCF2F8BA1
+:102ED000FC37C2EF4576E3F3CB23ED087D91D7F0C5
+:102EE0007949642FC2899137F0F9A4C8EB082747C4
+:102EF000FE8CCFA744DE453835F211C2EF478E2055
+:102F00009C16F90CE115914F105E193989EF5D158A
+:102F1000F912E1F4C8DFF17969E42B843DFBFD0986
+:102F2000B1EE25FA0D6721AE6573F7EB3B5F846C5C
+:102F3000D19C4B3D90E0403D397335CB23D9507245
+:102F40007232FAB52B2C0AFFBEA64EAF7E6303FF8A
+:102F5000613DD40C607D401EE01CCEBF078A77A780
+:102F600080BFB4A1B0B316E22177E6745600BC2F3F
+:102F700083F90D776430BB784F068B97560E73B28A
+:102F80007B062B86E2F91549EEDF3ADEE4F659B40A
+:102F9000BF398B976DDDD9782FA09FFDF4B7DDF990
+:102FA000F2A37E98E17F2203FD22FDFDBC7EBFFFE0
+:102FB0005FA827FEF9F79F3FD7FB1F707AA564969D
+:102FC000FD16E769F4E543FDC47503E464DA4FE5F3
+:102FD00066C90976B2AAA9602AD0AF90F8309E38A7
+:102FE00027465E5727A7DFFC7A1381B8E27C85600D
+:102FF0003C77FE4E96E70B71D052CA17359C2F9640
+:103000006DDC610617B4A67E11CB3F0AB1389395EB
+:10301000FE07FCBC64F32CCC3F5AFAA436FE540BDA
+:10302000711D19CE91B5CFEB789CA9CFB9822EBE78
+:10303000F46E068F2F7959DE11913371BDA7E97AAD
+:10304000219FC37F8BDD0AFA9FE201CF49C4FA4575
+:10305000BC52E081F4BDCF8079A127F60CC53CB508
+:10306000138A9206EDFC549C3A6C90FFE01F0BCF44
+:1030700029FE309FA4BB2101F3918E507DAE40E22A
+:1030800093D33F16BE9FD6F95E16E1DF6FD49E1B29
+:10309000583763FE75A5890E4CDB553E9E84F71F9D
+:1030A000697FF9BB201EF9B809F3818264A58714F2
+:1030B000F73D57285B6F42FE98BFCBC5F2C382BE77
+:1030C00037215F5FD0E348D3E0A9905734BF39A7D9
+:1030D00000C36EBB4CE8E789F35241A7BE79D165C6
+:1030E00089F07DC425CDAF233D29BD34F5B59BBF07
+:1030F000C4FB03945E4763D0EBE8B9E89598A9A5B3
+:1031000017C4956F80CAD54928A715EBC243EB5564
+:10311000FCA88FD3934C1BDE7714F9C4D3D2193D8E
+:1031200088D19B0A743DB9790CD24B4FA769FFA88F
+:10313000427A90F7ECF8BDDD3983C9BCABE9F3798D
+:103140003C6E39A7F10AF49F7333991E3BB0167297
+:103150002D09797DAD95F8A8F3FCC65A2796DF5A5C
+:10316000EBC1F23B6B1584EFAECD4578D4CCF27950
+:10317000843C5106C0BCBAFC4C2647F999625FB545
+:10318000CA0371E969FF78638C0155A367C6942C63
+:10319000F4BB35791AE5D76AF3303A4D3CCF6BA3CF
+:1031A000E485EFA8CC2FBB54D39EE48EEA2D83FD9B
+:1031B000E07923F39B5DF8FDB61BA72769DA5FDF93
+:1031C0009CA1294FCD5410BFB3A60DD63CBFA96218
+:1031D00084A65CC97F378158E30DEAF329EA19B167
+:1031E0003C6F276B7BAA7E6CDAAD74FC53FB4C58AA
+:1031F000AFA7C7517310F7E3C1472D5EB043C7E0D7
+:103200001E192D1F7B4B467D77CC44824EAABA8F68
+:1032100049A409203132793A7D90C9D3B47FC804DA
+:10322000F6E1E497163CBFABDA229120DCA1EAA6D6
+:1032300098A7E3AEFA8505D7BD608B4CFC785F4953
+:10324000698573EB558F0FF7C2B9E59CC1E12CB8C6
+:10325000B7D7FDAB38EFA3B4B6AA93BD7F8CEEAF62
+:103260005D90972415E2F9C1E7A52DD506C83790E2
+:10327000F7A5809C7EFEAC8CF194C52BDE2A728271
+:103280005E7BB5F5ED623ACED11619C7FDEC49CBA0
+:103290003619E5DD9706DF75ED5D7708E30CAF794C
+:1032A000CAEA32291F7C5A1DCA47BDB39AC5B7FB6B
+:1032B000E287AE17E80DFCAAD263BD768B9D9351D1
+:1032C000E53300F44395C98BE7A647379BF03C8F65
+:1032D000EA7F3CFF3FDA926460FAE759E4BBF946C3
+:1032E000C5AC1E77FE66D9C77E174231C37CC9DDE7
+:1032F000B29F8C8532CB5708364B7E765EA3A5EF06
+:10330000CD2BC6E2FD627DFE94805F5099F2ABCE7C
+:103310008196BCC0CE67C9E84EA33A7F5CC457888B
+:1033200087F52FBEE3533BE8819F4CA0F0848F7D4F
+:1033300072F0F4763BEAC7E386978A6EA5F0B3D2C3
+:10334000E0C7464A977AD9FF5026E4EF18366F95C2
+:10335000F05CE4A39FC079FCA74F9BBC28863C5F30
+:103360006BC92F170F3C577E10CC809D2F8753259C
+:103370000F7C959760FEC66CD2CAE3032176FE0FE0
+:1033800093A0F871D6B273AC8FC6D837C13DDC2A92
+:10339000DDBDDD8FF8BD856732258D7D3ECECB55F9
+:1033A00006269FE445F6FD45C87B19A2B2A7429FB9
+:1033B000BE90C9F2497AEC2A6945BD52CDBF0F5C77
+:1033C000FBA485DDD3518813E47131230FF90AE49E
+:1033D00099CE7789F9E99F023B2F221D68E73E3598
+:1033E00085AA3B72E0FD6D4D6E7CDFE40D81FC72C1
+:1033F0003B60A58A03F4C722C2E6B7AC450A8555EF
+:10340000710AF17B1C04EC824ADFF4B5075A3BB029
+:1034100090DBBB854497EFD3A2B54B6509765CD7AB
+:1034200092169EF7DC332F999CA538ABF6875E9DEC
+:1034300081F396BCA128F35844BAC3F01DE0654F50
+:10344000B1FB40FA79E9D7D1DF79567B674D86EF3A
+:1034500009F78CAB9BB7C037810B4A2A3A08BC5797
+:1034600007193EABDB24A4D75FB85F25EED909BAB4
+:103470002F22653340AF2DBA8FEE0B737AF9A0C7B8
+:103480005EEF08A1BFF4196971D828FFD76ED97112
+:10349000FD3878EFE1D7CDC0DF15EEF050838BEE2D
+:1034A00017833FFEC9B4AC28F65D67CFFF55F821FE
+:1034B0003CCE84EF517C2CDC2E635E83AA1D3FDF63
+:1034C0000F327E0E12CC23AA7953F636D2A735F0EE
+:1034D000733E85173E5F819FFFED79EBFD98DC2CF5
+:1034E0009E6F10C38FD1EB973E7E8CCE7EC2BD09FE
+:1034F000B097DD292C0FFC94D197E846BDACD3BB27
+:103500002985F8DD51A177ABB9DD13E32C047B47A6
+:10351000CB1F6F79CE01F187BFDCF75C2AE65180C3
+:103520007DC9EBB52FB754B1F16E793E0EF3963EDF
+:103530002FEDC807BFAFE291DF3BD4DF35ADF3F825
+:10354000A766C17CB93D5C266FCB76823D0C44CF2B
+:10355000ABE8B3FF8AB54EFB79D669D7AE733EAC04
+:1035600053751FA48AAFF3C366B6BE8F36B3F52E6C
+:10357000E8B3CE209E83DCF298C51B443F238C76B3
+:10358000FCD80E99C0FDB31E3F4367F74F9396AD2D
+:10359000808F652BDF396CA47CB17818C50FE5836B
+:1035A0008ABB2D68E717FF8A9D7F7E2A95A4E101DB
+:1035B000FCCB61C70FE9F325D43F00FFA2771E3D86
+:1035C000767F7996DAEEF7137FCB791C6A79DBEF99
+:1035D000F1F7A2241FCB875C2EBE03B34BF71D1857
+:1035E000057400BB276F053A651285ED13B5F1D45C
+:1035F000BF0DFD72EE4AE4FFEE61EAEFF5D6C58736
+:103600004D90EFDBBD4342BF68D9AA12470981FC48
+:10361000561607BB238BD92FC9E7C3BC170BA56B65
+:103620003C1DEF27590A7BAE38595EF7C304BF3BF8
+:1036300023E6AB7F0EF1712BD83F9B01ED9F7EFD02
+:103640002FF07196C906F4A76BCDCCAFEEE2DF7D0B
+:1036500078288BF9D30F6531FF7A1B8F0F74811F88
+:1036600009E7D39759F0F77A08998C71722361FCB6
+:10367000671478731ABFE8916FF497BB33014F73E7
+:10368000498709E839A3789602F7060EA75AF13B55
+:103690004AF4AF0CFA99CDFBD96F62F7040EC31848
+:1036A000745DB3793CF9307C06948E7F788019FD87
+:1036B000D8E00B16F4136E8F67F13E929C68043EBF
+:1036C000BF89EBA939132C3E381F983DE1F63280B3
+:1036D000B4BF20A1F8AAB076AF2FA0E33418989D0C
+:1036E0006F7013BC2F499A3AC700FE2EA16E31E4C9
+:1036F000C9D3D5EF3C9B742E3ED2DE53A885B8C209
+:1037000078C218AC18F1AB29D79A59FD1B8F1C99B8
+:10371000715F26217F826C26B0338023E08BCA4400
+:10372000DCE7CE843C7E374023F2DBD546123430D2
+:10373000D86CC3EF10B1BC7E710E725D310927D217
+:10374000F585F76AEF51DC10368487C3F98E31DCDA
+:103750000EF833581593938E53364D2A04BCD7AECA
+:10376000EBDF7C3F7EE4F88CFB26D0327CEF0AE670
+:10377000F94309F3796653A1073E9D6B242FCB854E
+:103780008C7EC087756E2588ED56303E17F737045E
+:103790005D0A68F76AFCCEE6F3A3FD343BE07D7377
+:1037A000F4B8C9892CB1CF637EDA522EB74B05DF4E
+:1037B0003DA595D7E46C2E37E00F52BCCDE6301610
+:1037C000DFBBB2995CB8B2599EF5B71738DE320B41
+:1037D00009E3BA5FB0201DC5B833394CCC1E84FD57
+:1037E000897908FEAD26F5987F53CDE33106AA49C5
+:1037F000304FB7E531CCEFD7E709510709F3CE9643
+:103800006CD73F57C573648D5EC238A764EE5E0007
+:10381000F393BE17E7057E9F6D6EC57880BE9DA9A8
+:103820004542393735537F4AE2E75BB46CD92CE126
+:10383000EF3BCCCEEC1E89DF2BE77E7535A72BD571
+:10384000DE53E11E5035F85378FEC5BF13B585F938
+:103850009146EEFFCEDFACF5336637A9FC4C06345B
+:10386000F7EA2DBAFC7013F7373E30778F047DAF3F
+:10387000BF67FF8181CD3F984A303F52DCB337723A
+:103880007F52F093926DD29C8B89FB9C15A0A7D898
+:10389000F70E74F95436FCEE4A85C4BF57C9E38A63
+:1038A00027A8BF89DF95391487764BC419BB4AEC2A
+:1038B0004143227CCE9295E724DE3203FCCC0A877A
+:1038C000D908F08CA113C7B955EEB0E7E4F4C6717E
+:1038D00037948CDA027943D7678F9869CDC2530E3B
+:1038E0007EBFC87B00F2D6AFFD86CE1FCB05337DF1
+:1038F000747FD4F54AF75C2B55D1B55B0B661AA9DA
+:103900003DEFBABF7B2B94D76C1D3FD348ED60D7FA
+:103910009DDDD9F00DE135D997B3FA06D1DFE53356
+:10392000213FB8EB41569E4DEB83E0E7F27B40151B
+:10393000E325D4B36BB8FD11F1A30AC34B0C4E645D
+:10394000BFF371BE76B76797AD01FB2CDB8FE2EF5B
+:1039500009DCADF8D680DFD394E9AFCEA670C92CD0
+:103960002968867BF16F868671FB15F5772FD66403
+:1039700031B9DC3890F527F045FBA9FB67FA49839C
+:103980007E5234FD04FE997E8EF6EDA7E19FE9E7B5
+:10399000FB8AB61FE19F89EFCCFD31C7F708F4BB66
+:1039A000740DDB0F93A336CDFDFF93F5CF0F03BB53
+:1039B0007FF2294B12F0E1D267FE3BBB1AFC3FEECF
+:1039C0000F7DD6FEAE19F2BE9747D87771EA22EC8A
+:1039D0003B39CB77B69BA7E6411E6BBB79926A7EDB
+:1039E000B5BDBF7365BC5AE5C73C9A2DF2B5D9EF9A
+:1039F0003A2E7DE613FC9EE05243EBC790E74BC6A0
+:103A0000B3389A7E9D9BF87B87E1DC3F4ABCE0C9D6
+:103A10006CA66FFF31D8F74436851BB309F62FC764
+:103A2000F86ED797BCBF8A78A6C7AB8AEC5685E2FA
+:103A30007BCC9BFE46C83BAD7E38A750A6F37822D0
+:103A400073E20EE82F767CB39BC537DB587CB3C29C
+:103A5000DDB18A1A29723C7BDE5DD6CB08B9EA015A
+:103A6000D273DF0FE286D32CA27CCBCCC91358BC17
+:103A70000CCA07B6D6DD05F2B387FF3EDB9CB12347
+:103A8000E341CE3B73120C4E2AFFBB322A8FC33C5C
+:103A9000E68CBD6C2A3C2FB1D88755B2F838F2C7F6
+:103AA000AE8CB2DF037DA13DC43DFCE670CA0D744F
+:103AB0001DFE3FC89837EDCF4FF047BBA7F20AB7BE
+:103AC00057C7B3999FB6C740E759D83B0F313E75EA
+:103AD000CC567540DC6ADD8002F0A353324B3ECBFE
+:103AE0001ED33B7E4AA6FF2094C5F874B9F9F0BCFA
+:103AF000BFF3788BD3E333A01B85651364F8524280
+:103B00008F5EBF7A7282A67CEDF424E253C74DAF7C
+:103B1000CDD094CB2B066BDADFB46084A6BED4D2B2
+:103B200031BAFE02FCFD3AFB9398DF7BA8EDF4DB93
+:103B3000B3C18FDD2E7B25BA9EC52F3CFE36E45FD8
+:103B40009F809F2029647131F6BD467E1E63F41963
+:103B500035E7317B9F3383DFAE8AF3EBEEE5EDC3D0
+:103B600038BEFE3C46E48BFFB3E7310903F5BFE7FF
+:103B700079FC55BA323269573BD2A7712FCB636EAD
+:103B8000A47E0B7C4FECFB3B2D21F886FBE7FF7DF1
+:103B9000C4ACA8CE65EA220DF8BBBA93761DC173FA
+:103BA0009BA7B89FB4BCED4B33DC93FA7EDB0A9441
+:103BB000E7A9547F2552BEE968272377423C39C7DD
+:103BC0008E79384B9BAFC03875626436C2DA962B5B
+:103BD000B0BF65916BB0BC9CFF9EEF9EF88EA96054
+:103BE00087F7FCDA85FBC1037278D843D08FC58E86
+:103BF000FAA13463CE3AF013F6C407F36EA6E39548
+:103C0000FED7F7310F7DF94E09E3A6A532D923413E
+:103C1000FE7D240EFB2B95FF347A057D7ED5246630
+:103C2000574BC1C7A1F572917D137E4F3AC6EFA4E1
+:103C30008D1DC8FC3A53279BF794C82CEC4FD45FDA
+:103C4000367090E6BB7CA694EDC6F9B6DEF5983AE0
+:103C5000258457464620ACDB39CB08F9E77FC87D81
+:103C60002C19F044DBE3F7C1FAEAE3B189248ADED8
+:103C700012D0C2F5F06CD0C370FE9EE3BB66600A42
+:103C8000FC1E61A7D10A7AD4667582FF32A3B840C0
+:103C9000A956AD4B7EE946BC076149EE3681FD9ED3
+:103CA0004DA15A6FCF8B61676E1C28F47603426179
+:103CB0008F48E407EC3BA83C3E20E469EA4083E6F9
+:103CC0007B3A1D12938BE0AFD8B940698E7FE940F3
+:103CD000DA4F4709297F16F5684736DC47FF57CD8D
+:103CE0009FD2D70AF477183B09C431EAF97C843CA7
+:103CF0009F6FFE7379FB033209005F1CB8FCF20E64
+:103D00001F9D57FB6DA346815D10E3350C6479A6BA
+:103D1000C4D9FD0DE61BBE98A0405CBF14CE3C4646
+:103D2000F7FAF3908F08F1C3BA172D8FC20752EB41
+:103D30001C747F6F83BCC0B830F06DFBEFE28C6009
+:103D40003F0A87F81B002F937E377C327CC7C7D78A
+:103D5000663112F4837CEBE079ACF99E4F7F0979F0
+:103D6000D4F399BF99C99F9FCB6125E7DBF95C0E1E
+:103D70002B8DDE44388F99B74FC67B91F3574B2379
+:103D800077427C40B1E33D7D218742DE4CC097A362
+:103D9000803F195FD6465C5CBE7378BF4C0E4A65A7
+:103DA000966F573AC285FBE7E591246C27E455C826
+:103DB000E91D39FE1DC0D7A58D54BEE938FE750337
+:103DC0004683BCF4F289D909FC44F9C453ADE283BB
+:103DD000C6F6AF8CC027A60912F28985C2492A3ED1
+:103DE0002AEBF14F9C5353E93C6634E5E0F79445E8
+:103DF000FDAF7BF8A57FFCFE18978FF9B6F050F069
+:103E00006B4DF5715EF88EFC896405F5D8CA8D128C
+:103E1000FE38E14A53D924F02F563E28617C0FFC2E
+:103E20000ED03F4507EBCDEA73901B23F9785E7DFA
+:103E30004D6408C22732FD2F03FD2B23D7733CE6C8
+:103E4000473DEF3B557F3BC6D54E852C5EF69D31F9
+:103E50006DFC6E8CCF8BE77FA67D26B24D81B89B23
+:103E60005FC6F3BD2CE2BC5762F13B88E789F89B43
+:103E700038A71371380B7C0F5765474F1B5BB26136
+:103E80001FD2271E57C2ECFEF1ED26766FABFD4F19
+:103E900045065AFF698E0FE372AF79FC87613D4B8F
+:103EA000AE0E3D63A2E5A5773EE78078B9C067AB6B
+:103EB000313C14F64BAD148F101F6CDD2C4F0B31C1
+:103EC0007F2761962ABF22165F2F890C46FC087B4C
+:103ED00023F4F7F36B3DB829157AFC7C7648F0F7AC
+:103EE000322E07CB400E88DADECC2A83DF3523B9A9
+:103EF00012DE73EDB5374C1E849EA6FC8E72533ACB
+:103F0000380BE3EA426FEBEDD16EB9F5DEF1C03765
+:103F10008ADFA950FCFC0F4D62B3890080000000CD
+:103F20001F8B080000000000000BB55B0B7854D518
+:103F3000B55E67CE9C994932AF3C0986C43393077E
+:103F4000700D383C22E1E1C78140002138C15B455A
+:103F50004D65402411131250AE51B8DF9C90808003
+:103F6000D486EA55DA824E28285AB551B0C68A302E
+:103F70003CB4A15A1DABADF456E8A014791BB15660
+:103F8000FCA472D7DAFB9CCC9C4982526F874F37D6
+:103F9000EBECB5F75E7BAD7FADBDD63E8789BFFC50
+:103FA0007AFBFF0240ED8B4F4F820C8009570920AE
+:103FB0000A00339747CD36A4C16E736FF5205D3A82
+:103FC0004C5E500C70917EE301C4BD5F49F210005D
+:103FD000EBF24A50EC00B7625B668FF54B004A3B50
+:103FE000D20051F32C47EC79A66CC2FFD1F32680A6
+:103FF000129C57E73BBF14E01A80DBDCC07F8DC802
+:10400000D41FD7217EE49B6A85397E5C1FCC91BC8E
+:10401000F8F92A3C1307CAC85A2C0B6CDEFF2FB9DB
+:104020002B44B00969004E7314D28A697E5D6E9587
+:10403000AFF32D725FA1F1BF2342633B8E7F67FC1C
+:10404000F8888272ED5936628428C7D61B2F5B1818
+:104050005F453A8E1D09D0F59A35B419E5069C4F97
+:1040600040FE4F5F1B1C5A8B5B3B0C5D17C83EEA42
+:10407000CE1499F655BF2B85F1D727BB4202F6D750
+:104080003BBB8AFC284FD9EEA4300CC57576279926
+:1040900001D7FD26FFF6F1A49FB2DD0327094E14D8
+:1040A0007AA7D50CC8F7409EA2D0F3BEE4D7E54B63
+:1040B0006CF5FD97570AAACB0530BDCCA19AB05D2F
+:1040C000783E1F6004C05DABA7B1F6E560362A19E3
+:1040D00060F2F94A00DC5BDDF91BD8F345E75318C1
+:1040E0003DFDC14839ED075E16602BCA5F91F3C3F1
+:1040F0001580F27526C3901DB8AF4E6FAEAF9970A4
+:10410000D93A8DF157FC6ACA54DAD7A21DC84CE3DC
+:104110000609A142D2D351BB09B200EEB671F13FFC
+:104120006FF860A48CE33F1FE91806C8BA4F6C7F94
+:10413000788CC0ECD949F69CA8E15D3A2F8282F2D6
+:1041400058CF0BACFD400E2C964B181F401AF9436C
+:10415000FF9101FB77C1D32B928C78946A3F93082F
+:104160004F566CCBE2FAE7683849D4E37F5DA61F6F
+:10417000CCFF8E785A43782AF9B7E2690DE9A9177E
+:104180003CADFD3E78BA841D7DE089E16CFA9B1C54
+:104190001F90EFF06D0586172677A72537D48C7C06
+:1041A000B7925D095F17A181F43987EC9B1EC3EBC1
+:1041B0000E4FE0F9783B7726ABC58B8BBF8B9D6F9D
+:1041C000068A1BB766348082CFE7601B1F37AC645A
+:1041D000BFE29EFBDB7E99766EFB8E76DEAFD91951
+:1041E000DC68C791CC7E32D935D1EE6457B27BFD05
+:1041F0002EEBE64BD9757841E09DDEEC0AEE6413B8
+:10420000C919B38BF506C2CDE76133907FF56557C9
+:104210006903D7BB4EAF0C9BA786D87900E99543BD
+:10422000185E22DF072F1565ED7FB7A5029C0DDD17
+:10423000ED378F06B8B114BBAEA0EE7B5A95028A5B
+:104240002FF8F7316C46056C4C9F9C56974626E13B
+:104250007EA73FDCDDAF52FFE4712E3E1EF9715B9D
+:10426000DDFC67424B22EB98DCAD5CDF81A8D93FD7
+:10427000248E1E89B4238E2E4DA037727E3A47DCE1
+:104280006C9E10F74F9C5F184EB43E9FE607D055CA
+:104290009E8AF69BB94370AF457BDF32EE530BD954
+:1042A000A7A22CFA460EEE57685BEEB70FC6E714CE
+:1042B0000751DED4B69656B5401B8FFE53ABA9D13D
+:1042C000DA2E2822DAA9B65408793D3DF598EA316C
+:1042D0009E67F4331BC78365E4E58D273BB2F15E2F
+:1042E000363E6CBD8CF56F1A074AA8973879A587BA
+:1042F0009FFF7001697D7ED4DD0DB8BF502FFE3663
+:10430000509B376232D501EAEBEAB60DADB65CB42C
+:104310002F707C0C6B7BCCAF721C8292B0DF4BC9D0
+:104320009BA9CB11B75FD9383E7C297DE5F4D097A6
+:10433000868F1A235E5C66FFFECF510E5786E056CD
+:10434000D1FE8BFC49EBC045F6D7F1BDD9AF0CC00F
+:10435000FD2541375E8DF8FE859FF0BD0874FEADEA
+:10436000AD742EF94DDDFC1CEF3B85EEF183D0954D
+:104370005DC0C74F6FDBD2AA16337BB07E469B2F42
+:1043800081F7F6047A5C827F68F866FE49711BF556
+:1043900053D84BDCA8D1F47B4680D914F72213798B
+:1043A000BE17F1F276B587E7770D1A5FA36EE7E4E3
+:1043B000383D0C88D9197F611864D837D3D3CD190B
+:1043C000FABEF7FB67A0DF44D26088803859E10964
+:1043D000B7B6C4E1A4C5B39FE12436DFDE08C5FD4E
+:1043E0009B353DADF6EC8B683812C8EFEA1820100B
+:1043F000073B0455C47DD6110E7AD9E7AC9E3852DE
+:1044000013C62BD225C6CFEE395E49180F52C6E52A
+:104410008CD7EC3423C18E5313EC382981AED2E90A
+:1044200090219EE9716E5EC7FA955928C75DDB043D
+:104430003A26285E5B8461009BDA7EEFB7F727BCE3
+:10444000CA520EC6FCB6B6772236C47225C533866C
+:10445000DF48AB8278BB81FC9DD1EFFA1517E1A74D
+:10446000616536F23FD5F687561BB2DED2B25EA248
+:104470009CE6976DEFB79A71DE9B47FEEA0D9ACFE7
+:10448000DCF4A7C80CCF25F0DA9AB08F8D09B49A66
+:10449000C0FFC8B7C4F79684F1CB13FAD725D01B59
+:1044A00012E8D5C6F173E70BCC4FE6A2FD4871DFE9
+:1044B000E6377B347B76FB3FEE40B0B33CC980FBF4
+:1044C000E9CD9C7EB3EDA87FB53D8EF61CF393BF7E
+:1044D000EB389680FF6ECD0095CE0FA98F78F64A07
+:1044E0005F381A9478DEF1FEBFD25FFB53DE098697
+:1044F00073799F68A4F788BADC7F8FDC63A7873A5B
+:10450000FDB99FF2F1E98F19F78575A1467FE69F06
+:1045100084FE3FFDC71AAD76F995B87DEAFCE5FF4C
+:10452000BC28D27A473C5DFE2DB8EFAA89E1C206CD
+:10453000E4AB4AE32D9E33229D63F536EE4FE5AFA3
+:10454000897E3A67AA92C3854B8AE3F609ED45B4A2
+:10455000CF3DCB44661FB599D723F3C067012C85A7
+:10456000F6B85C8D4F22FFBE6562239D6B871BD31F
+:10457000B348FEE15E5EEFED735D997507D27B5245
+:10458000E65864E4DBF3C064D6EE1595555D88E328
+:104590008B6D17D939BF27C5C5F4F3B5E76B7F130A
+:1045A000C6AB6F3C325B3F90E6CEEAA07C75AD04B3
+:1045B0005B6592C7F738C3CD8FACC3D6A21C739B83
+:1045C000AECAA2FC6DDEFF5496F747BE792B259F3D
+:1045D000C0F86028C91D583BD942FDF35BB4569D15
+:1045E000C2DADDDF6C7F7328F277AD117D9B9179A4
+:1045F000D779AF731ECAF571128FC31F9D2E7092AB
+:104600009C8F7A03C95EC2ABD3912CD0E1E1969D19
+:10461000B370DE87F395146F668C7FF737E21CCAA0
+:10462000375F3D3D2F2B8074A697E366D7F9795904
+:10463000F3E2CEFB0567CC4CCFBB2DF23D945FEE91
+:104640004ECE155481E939BD12FD65BE965F235EDD
+:104650001AB7F772EE9BBC22D3EB516B237C8C20F4
+:10466000DEF360E63892531F57F27EA0D941781EE0
+:10467000200F8FCFA3B3F2267A48DE18CEB2DE2504
+:10468000DCB03C1AE9E2CD69EB553A0BF761FE4F1D
+:10469000726428E5D40FCB9101F34EC86E2F8ABF08
+:1046A0008F88E5A92BB478C0F90EA90E56B71E7AEB
+:1046B000362944F5CC21F52F0EB0C7F3733FA97608
+:1046C0003A543A8C3F7138CCA4D7C3E6E0B1FB70C2
+:1046D000DC824D128BA30B36652EEFA27880F62C70
+:1046E000849EEBAEF44A6C9E3EFD44CDAF34F80997
+:1046F000E457D2B9D6979F946FF6566EB1F7ED276F
+:10470000D55ADE5EBE49F213CEAB4B1C66B81AEB2F
+:10471000EC4DAF6F253C562F4E1A6E45C1AB375945
+:10472000997DA30E87EAC6FE80D3614EC5F6560D6D
+:104730000FD1A62456A788591616F7C4552532E975
+:10474000A74C04B30DCF15D1E993FD9C6E7163DDC9
+:10475000B6D2512A937D577865B6DFEE7ED7ECEB63
+:1047600004AC6BCEE13ED271DC89C6871F1D85F299
+:104770009D84D08DA350EFE7C8D0B8CEB91D624854
+:10478000A573C2AC982B30EED500F7F7BA03DB2D3A
+:1047900013F0AF350DD533A83EBA33247D14D56A56
+:1047A0009F8BF8DF17F09685F2DBBBB6199FA3C786
+:1047B00058C8AFEADA8DCFEB61DD67E2506ACD1FF2
+:1047C000450769CF71DDC60FFF3C647F1CDFDD5EEE
+:1047D00047C6312CC161380C47CDE23AC5AE9B08C3
+:1047E000768D2293575C9114223D8A79FC7C980245
+:1047F00042288900E1C67DE3BA5F060F0ED98F809B
+:1048000010EF1FC1F4723488781A88FA70DA18BF72
+:1048100078BF18B2E2BA65E9A0A4923E1FAD047059
+:10482000307DAA6EA4A7643498293E7579B83EE716
+:104830000AE06F677EEFCBA3FA78C1A62466BFEAD1
+:10484000C7EFFCD34F4792BD2A32E2FDE821C25D9B
+:10485000099B0F6C69B1793E69FAEF3C92A7EC09AC
+:10486000AC2BA9DE14038FDECCE2658A8FC52D77D1
+:10487000F447A308274D29C3D602E1A47F9EB73889
+:1048800036BE7AC5B2223E1EEB5527C5AB24B69F75
+:10489000DA1D568693B96B44859D8FB916763E7E98
+:1048A000D492C4E8DA01A5CCCFE69A2040FBC05CE4
+:1048B000309BC575AE72A8B583B2DD4E717E5D4486
+:1048C0007432FBA89ADD2C649FA7BDE96CFD39A466
+:1048D000633CB70E68389B6BE2F8815D42682B8BB6
+:1048E0004F0D32F97F954960712ED11F7F434918D2
+:1048F000C5C93CDF6D34AEEE21AB6F8587CB20EAB6
+:10490000F2209EEA4C91053FA7797F6D65F71AF575
+:10491000B88F2427AB2F941751FE7A33982D742F1C
+:1049200025F378A6CB532F574E219C62FF4133F6D7
+:10493000D739783CAE4BE5F73DE0B085B6C6AF471A
+:1049400032E7F371B293FC6C34C30BF9BD09FB3F42
+:1049500005DE5FE62C95A3F8BCD304ABE99E84E4A6
+:10496000193C346E5DA4FB0F253C2E367B1D6487FD
+:10497000F41B67D37ACF892C2EA1333D544AF9DF3B
+:1049800073E208AA63E7AED957BE81E81786B94932
+:1049900084B9CFBFC7CEA7BB349C4529EFA7F30A84
+:1049A000E917B0FDC8CBF3FB80C8EF713EF2F2FC13
+:1049B0005FD7ABDE5FB74662F6A85BC9F150D7F4AC
+:1049C000019BB7CE11C9227BD4BD245D43B83EA55F
+:1049D000C93DAF2977DC41C4C73CC9E516F051ADEC
+:1049E0005A6121BAB65560B4BE5EDD9A3F66998AB7
+:1049F000F97CD45A351CC5E6CDCCA3F3ECD4B3E98D
+:104A00007973E3EC7EAAE565A76C27BF0917BAE9BD
+:104A10001E6671926F33F3536E8F532D859BE99E03
+:104A200066BE3BE210B07FFE3DF96974CE1D76870D
+:104A30002DD47FB8DD63225A71BBC711AD98AF6624
+:104A4000F4290CE1EDC51A78D14E8B048E9BDA6700
+:104A5000F759BCB89E3B9FEBE7CC73EF15D17D4176
+:104A60005D5EA488CE5FC455510ED9E51981E50974
+:104A70008B9E1595A4A1315C2D225CA1FF2FD470D3
+:104A8000B568C7CBF7929F2E223C0DEF894BAC2B1C
+:104A9000F7B3E72FB695031FBF9F70A79FF748B7DF
+:104AA0004874AF66D1685C87E8D47C99F901F64F09
+:104AB000E2FD6A313B47206AA17CB85EE47902FAE4
+:104AC0005336E511F51D92DA1D2F695DEA2F8EF53B
+:104AD000F7859BE1F926CDCE56761E0DD7F4125DF3
+:104AE000F392937071E6B97D6F8CA1FAEA45C14DDE
+:104AF000F1BE871F6A7AAB273D39D93E595E544FC4
+:104B00007A71C6F4D4ED6F1A2EEA81EB41D74BBD12
+:104B100059D393DEAF8D1FA1E9A11634BDEE18C89D
+:104B2000FD5DF36FFD1CD1F71748E3E3757CCDD72E
+:104B3000F637219F9F9BB5881B5F31C39762B946AB
+:104B4000ABFBB1EBCC0B6DECDE48B7A72EF7F27CDC
+:104B5000EE0718A795D4B4989DA326A8E9ED9EFA70
+:104B6000264D7F929DC795234D39B735A2FE163E3F
+:104B70002BFA98F2A8E68A5BD76A8A3A585E7ABF1F
+:104B8000E8A67D95FDB2F23ADAB78E3B699B60EEFE
+:104B9000184975462AD3BF2E5F593FFF75A91C7768
+:104BA00061924797F3881066F6525F10DC3CCF8D18
+:104BB0005AE8FE50F7D34479E76BF28A4E618C7065
+:104BC00035C9E393C9BF01CF41268FFDE032B69EC0
+:104BD0007A689967686C9DC3AAC34C7C8781C701BA
+:104BE0001D9747B4FB88232B5F6679B0BECEFD3D91
+:104BF000D7093466F45C47E75F92CFCF01DD2F3AE7
+:104C0000D338FECB5A3E607C7A9CA51FDDC3E9FAFF
+:104C1000D4F516E79706FDE8FEA5FB936ED77FD582
+:104C2000AF607926CB571FD0F6CD7C242B762E1083
+:104C30003EE9BCB35A109776C3B9C9F29A29033E2C
+:104C4000B3047A79AEEB29F179AC9E72E791FEA7B5
+:104C5000D8B34D9407404BF6FE82B8BCEC63BAEF74
+:104C6000A2789A09FC7D06A057C69DE77ABEA69F4A
+:104C7000D7F85BD78D4B1C5F9FA19CA0FE9A918BB0
+:104C80008B288FF847BE97E9EF24B45B26E07CB50C
+:104C9000C723E54E3956AF5CFBF7B0E8A2FBC01D59
+:104CA0001E43BD507B7A3FF3EF3A88ACA2FA76EE12
+:104CB0009AF72A4691DD9FC67C1CF9E6B77AD8B9E7
+:104CC0007762CBED23A8949DBBB290D1776EBD8364
+:104CD000D36B783E377765C993741FFF7192524E3C
+:104CE000F8EE5A2FB8A9DE1ABBB564F92DD83FD615
+:104CF00071652AC97D68CBC71563A86E681499BF12
+:104D0000285B1EBE91FA950ED1475B9D0FEEE5B76D
+:104D100010BECD2EE66F87B573A259E2387B578B54
+:104D20001307BA5B8EC3B2E6E62213ADDB86E71348
+:104D3000EEBFCA22B787A9EE7BAD9F6F33E90BCBDD
+:104D4000D46CC4D17181E7DF3516B011AE0E489135
+:104D5000A524FF81A58E614D248078E11AF20B45D0
+:104D6000ABB3B06E62EBEAFAD2D78F68FEA2CFA3E4
+:104D70008FEBA47C8ACE0F4DDE132D4FDF4879C216
+:104D8000896D856910A7F713B42FD4F79D18175FA5
+:104D9000ECA5FE3B94AFDF4784585BA3DD1B1E9060
+:104DA0005A07D0FB5BCCE38FC6E7E59FB425D90853
+:104DB0008F98C71B9F4BFC3CC13CDEF01CFDE6A856
+:104DC00031DFD7EA3BB1CA15E8250EE96D629EDFF7
+:104DD000956FCF387615F4C8F375BF4B1CAFE7F568
+:104DE000DDF72C1FDA13DEC78C72C125D63F1D44B8
+:104DF000C360EDB78D7C17E59D94F2CFED11AA2726
+:104E00005BAD6E2BEAF728F915BD077C49E479A262
+:104E10000D7C61C4C5D13F8EF0911F2EF890FBDD53
+:104E200082762144AFD8F7AF7F4024FE3B360AD0CC
+:104E30004F88ABB31E597F23B9DD395F60557FE4DE
+:104E40003FB74DF0A94C42C59E505FBDD15FEEBB50
+:104E5000BEFABE75957ECF94A8F72B0BB4FACA079D
+:104E60003EA3DE797DBE1BE1533ABCA7DE4F0703AC
+:104E7000AC8E3A1BAC61EDE8F6B6B21C94FF53E180
+:104E8000C84363C97F1C2E764F723AD8C05E029E1B
+:104E9000ED18716126EAE755BBCB4D71E36CB0911B
+:104EA0003DEFC68B86CF6B77EC117380F1EF1C8BD7
+:104EB000FCBBEC2E7AADD1CBFB366E5F8064FE7E00
+:104EC00054ABB7EF5E3CAA1F3DD7F77BF23E6E674F
+:104ED0005DFE93DB6E77527EBAE7E7E93B47937D51
+:104EE000535C6E8251F506110223008E6DE071E86D
+:104EF000B8CDF524DD971EDF784316D58377485D5E
+:104F0000161FCEEB7BADD249F7027F33479D6E6A09
+:104F1000913F4C72984322C5BF315381BD071C138A
+:104F20003683EC61AFE8194E469F3687C2489FA290
+:104F3000F783746E5F48E6EFE9B5F77E77BCC2EFA2
+:104F4000D3BAEF4FB47B84B1DA7E9715A4E9EF7B37
+:104F5000D8F3B252FEFC938DDB67D27C27B6486E45
+:104F600092F7EC1689CDBF10EB7813E2F038E28DA2
+:104F7000E2D7C2F7451F41FAC4365E272F44DCD280
+:104F80007D71DD6249B1B87AE2B14CE7DB29B0FA54
+:104F90005AC7E5422554CEF4AEE1D3867F2EE29186
+:104FA000910AEDAB481F8938FD57EBFE2584CBDE17
+:104FB000E241020E747DE97888E113182E75BBA7D3
+:104FC000B50F9B90C306A82C5EA8136110E505CD14
+:104FD000161864261C98927DE4E78D36E750BA6770
+:104FE000FA3289B7F79ADCAF53BDFCA54996046C39
+:104FF000FF56E061E3EF157D93899632A2EC7E4087
+:105000002C3329263AEF9AAD2C5E24C69B870A786A
+:105010007EEA25B061FB4C819BE78FD0C0F207BDD3
+:10502000C50DE6527E529992F6858C2C3F2F983111
+:105030008BDEE3568E4D5B9A8F99E52F0A66CD3253
+:1050400023AE2B47A4BDE4457AEB163FA7AF4E2B0A
+:1050500091906E126E983509F9F716283F2D288920
+:10506000ADA3CF8BCF37D2F3B7FA059EA0B6DE62E1
+:105070005F4DF1FE53A16B91498CF1BF2BC0E157FD
+:1050800085181D95208FF2E967E89D6A49DFEDD903
+:1050900002655B412FCFE701AC243DCE537F7B906F
+:1050A000F235FCF96D88B7EB35BCCDB3D9C3840BB1
+:1050B000582D9DEEC68597E292CB4CFE3D5333F7BB
+:1050C000F5E6F01E1A3F185ADCC76C2C15DC783157
+:1050D000BDEF388F8E09C7F4F9707F9F4AB85FB46F
+:1050E000ABA0A0ADD1A504547215C63761E76FBF60
+:1050F000A2799B558826313B54B9097F02044C178D
+:10510000B1AD4B413CA09E96BC74663FC1FF4E3D85
+:105110009FCAE6DF672CD5F0787D4479AC0D85FA1F
+:105120002408190568EB33B0F7AC19D73D610ABC08
+:105130005D807AAC35BD95B74426BF6D7652FE7260
+:10514000E679D13703C7D56A793B5C10C3E3F179BF
+:10515000A767F0E6B57138FA40C3CF694F386F19C9
+:10516000C50F0FAF3BE1C2BEBC65C83FD53BAD84A8
+:10517000CEA54740F97301B3377FDF30D3DCFBF7AF
+:10518000177FB882E73BB0859FAF5633A88E34D6E1
+:105190008213F5310D6529455A425A64EFE3438C79
+:1051A0009FF89C94A7C8B767F3F735E0277FD4ED45
+:1051B000A8DBA787DD5064CACF4D3690C85F06C311
+:1051C00046379D3BBAFD268B76166F96BCC4EFE33F
+:1051D0009608D19674A29FC3F392F4A5F965CF7394
+:1051E00073AB854C51B3F176169FF4B824E31FC21C
+:1051F000CFBFEB5ED252A89D9BC36018E1EADBF201
+:105200001D3D2EA17D1C8571EF7FBFD53EA422DC04
+:105210006FB5B6F664B14A36935E326D3E8ACB4BBB
+:1052200036E5F7E3F1F82710CF071BD3193E57797E
+:105230004466C78A8E1C90F1D19D1D02C878CECDE0
+:10524000E84867B4F37C7F46573CD56F22E5FFDD25
+:10525000EF2D9F1AC8E8134FBE3932C0EF576C3498
+:10526000BF1F74398ADB291F3A674739D00E7EFB8E
+:105270006A765FE887EE3A46B828108D28217F527B
+:105280002495DBC5D6C4FC5ADBD71237B7E39203AB
+:10529000FCDC5D3281BFDF33AB835D8407A95384BF
+:1052A00010D23F3820968491B5598BCBD66C13C859
+:1052B00071F6489293418EABDF4055225427CDD6EC
+:1052C00070923228CDD0FF80109048AED9F6050CF0
+:1052D000370EDF1586F92279E59D4C1F019EDFEA26
+:1052E0007802F1B499E4FC629C00E9888B1FCCC67B
+:1052F000FEB879A5719F4D12586BCC8B512F472F5B
+:105300008527BF8EA7C13098E129413FE81F2CFFB8
+:105310003C87E738A54D985D3C360EE91B3B2508D8
+:10532000C92CDF64FE734E4961F7F72B353DE9B8B0
+:10533000F30F048782F3BA4A8D7A4B558C7A4B9FD0
+:105340006AD453A6DFA8977EB3BD86FEFE81FF30E8
+:10535000F4E7D40C37D0B90D630CFC57364E34D07B
+:105360001EF53A037FFEEA5906BAB0F51603FFC0F0
+:105370000DF30CFD83430B0DFD576D5B62A087B4ED
+:10538000DF6FE0BFBA6385A17F5878ADA17F44E7A6
+:105390004F0C7449E46706FE5107371BFA47479FD5
+:1053A00031F48F3DFEA281BEB6EB3706FEF1E7F782
+:1053B0001AE809F0A681BFCCF69E819EECFE8B8197
+:1053C0007F4AF6C786FE69F22943FFF4419F1BE836
+:1053D0000ADFD706FEB62B024F1462C89F6D5A77BC
+:1053E00048058ACFF28FC7219E6FCA30FBC2C474B2
+:1053F0009975DB53855A9EA6E1F60BB0DF66F27E07
+:105400007B1C5C47794126E17A06D07DEFB9768135
+:10541000E1BAAFF3D985F9AE396E1FA98A0D0BF049
+:10542000189D3ED56DA033FDD906FE7EB365437F42
+:10543000FFC020437F4E8DCF40E736941AF8AF6C03
+:10544000540CB4479D6AE0CF5FED37D085ADB30D06
+:10545000FC0337040CFD83433586FEABB63518E8F4
+:1054600021ED8D06FEAB3B5443FFB0F06A43FF884D
+:10547000CE56035D12D960E01F753064E81F1DDD54
+:1054800066E81F7BBCDD405FDBD561E01F7F3E6CC3
+:10549000A027C001037F99ED5D033DD9FD6703FFA0
+:1054A00094EC2386FE69F209437FED29841FE5CF42
+:1054B000AF0AECFDD7F4419F19FAA50CCCD3E97ED5
+:1054C0001A927DF41D7E629EAEE76F15BEAF0CEBA7
+:1054D000DC6B6A60DFC57D69E2799DA3C8CBCE37FE
+:1054E000CCDF6D361667F1841AC2AE5A9A283F7522
+:1054F000A902C31DA51A55ECBE3083BD576047A352
+:105500004CDFA1617E83449AC9E3A1FA21259687E5
+:105510000EB838E2BBE7A13945C0F07F5D51C05DF0
+:105520005442F5D80BE5549FDC09EA2A9203CF5781
+:1055300017BD677A3BC9786FA4B7D36CA8BFB8F51D
+:105540000E24B50E187E09BF9D663BCDF8BBE7D58E
+:10555000EE9504DCDF92B8F91FC2BAC98C25646BE2
+:1055600010FD0BFDF4274137A31F096633FAD1A0C4
+:10557000CCDA0DC141ACFD59D0C7FA37064B19FD45
+:1055800078506174283895B59B837EF67C4B7036D5
+:10559000A39F0C0658BB2D58C3DA67820DACFFD908
+:1055A0006023A39F0FAAAC6D0FAE66CF5F0CB6321F
+:1055B0007A477003A37F1D0CB1B623B88DB5BF0920
+:1055C000B6B3FE9DC10E46EF0A86191D0E76327ADD
+:1055D0006F30C2E8FDC1838C7E2318656D67F0389B
+:1055E0006B7F17EC62FD6F05CF33FAB476DF3FB502
+:1055F00088E75FBA5E741A6012C3839ED7CEA4BADE
+:1056000085C0512A9D35D42D09F543A23D4E6AEB44
+:105610004813F1D8A63CE78AA2CDCD71F9FE7F16DA
+:10562000F17BC10792414DC2F8D744C53C42B12934
+:105630000D42CDECFD2ACFBBAB355C4206CFB71790
+:105640006872556BFE5042F81CC4F0F9D6E5D44997
+:105650007A9DDC322030BF08DB85B92695DD13D872
+:10566000434594F73F3520504DB83DD770C71B6C6C
+:105670003DB7AF8816A9B086336FA2FB9F0322BB4C
+:105680002FED6BBD7AEDDF2FF4D9BFEBC4003A8765
+:10569000A67E23B2FBF4B725C76CBA1FB94FD3CB94
+:1056A0007D4526433B34D7DF48727E52D8F0E4DD97
+:1056B000C852B5B8D04579EBF5545AA3DF57822CC0
+:1056C000B1EF6341799D3E99FC01267644DF042ABF
+:1056D0006B3B72024D34FE662C20880E8CB1E6F5D1
+:1056E000B69F44791ED470F16091C9D04ECFF5AF0A
+:1056F00025FD1C2D540CF2A8B9B2F6BD7BD7E324CE
+:10570000D73F5EFBEC98901FD3B77E2FB16A82F62D
+:10571000FDD462417F4FCDF3411BE8F920EBAF5A36
+:10572000CAEF677E887519BDAFFC508B87E71A24D6
+:10573000162FAB84641FE5D3E71A960EA4FD24C68A
+:10574000CD2A1C67C27155C0BF87A8FA3085E10B0E
+:10575000E7037AEF5685993BD57F77E7EAF71E5145
+:105760007B269747A1F7B073765ADBA84E459C3C41
+:10577000CDE2D86851B5609DFCB6295424880C1F31
+:105780001601E5ADCE407CF49217E83858A4FDFB35
+:1057900018FD39E26B3BCD77F6955183D87B935D4D
+:1057A000A365D25FB309ED41F735BF13F9771274E2
+:1057B000C54EDF71B88ADBD877FE944490BD463B76
+:1057C000D8FB903D2234BED04BFC7C5FB3DBDBD9F1
+:1057D000D2D4109BD7F89EEFF71AAE7EAFE1AD6240
+:1057E000EF81DC7B71DE459D12AB776064B4D8DF5E
+:1057F000CBF74DF58D6FF62F88DB477DC711FE5D2A
+:1058000014448BE3BF873AADCDABE349B438026DA6
+:10581000F678F9388E10D7EF911E10D7C728AF9FB2
+:1058200069955D37E1D028AA268C6DE00937FBAE7B
+:105830004EFFBE6E3EF8595B8D70201CFBD5F5AC5B
+:10584000FE5D08EDECF9A2D2DBF388AE87AE49D954
+:1058500054BFAC6E7A3D1BA5BBA175FD64BA7F9E9B
+:10586000159AFB3AB5955B84635477A35F1C25BFFB
+:10587000880A0D2BA924BDE5D9092BE99E77A6C876
+:10588000ED006F723B208E1431ADE7FED00F4ED18C
+:1058900078F40326BFEE07552B387EF47F8FD1EDC9
+:1058A00017A577FD3587DE7D98BBD87721F5BBAC92
+:1058B0006984AF8554798AF179A17E3EF3BCE02EEC
+:1058C000CC0B88EFA4C4ED7FF25012FB772F270595
+:1058D000C4C7F09EB8D7F3CC2F4DFCDEED5E11B7F8
+:1058E0002852BDFC30D3538D2D3494F484E7B33467
+:1058F0009070FD71FBAA6174DF37319447F9AAF407
+:105900008CD5D7EC31C479B89812BBC77B48E2F785
+:105910006A89F2F6C85B4ADFF88AF209AB05547A65
+:105920009F84FECFFDFE3097FF4B5320FB1A91E77B
+:105930002BAC8E1EE067F53F64D97C6B859EEBB780
+:1059400068EB76FE93D7D36A2EB0EF7112E510DCC8
+:105950007CDD4479ACC95C0EFDDCE9290FB7832EF0
+:10596000CF90811E7E2EE6296CDF4DA65416BF3ED9
+:105970001503C5A437FD7E4CAF633B3D9FB0B80E09
+:10598000179A07F0EF7BC37D9DA7A7BBEB676FEC72
+:10599000BCD3EF99605CEFF7827E9B5B22BBCD02AC
+:1059A0001F8BFB83E1435D3F867BC2FF035073AFD8
+:1059B00086E0390000000000000000000000000048
+:1059C0001F8B080000000000000B7BC4CEC0F0A3BA
+:1059D0001E822538106C62711D0B03C30756D2F569
+:1059E000C17025507F0910E703711610A7027102DC
+:1059F000104703711810BF069AFD0C881F02F11D95
+:105A000020BE0EC49780F82C109F40B277191B035C
+:105A1000C35A36D2EDFF83E4E78940763910CF24AC
+:105A2000231C46F1F0C0F23C0C0CDABC08FE3E5ED2
+:105A30005479051E047BB92065766D03EA0700E9F9
+:105A4000CD424A800300000000000000000000007A
+:105A50001F8B080000000000000BD57D0B7854D58B
+:105A6000B5F03E8F79253393C9839040C493970452
+:105A700009382421F2AA1E0842A4D406F42A5AAEF8
+:105A80000EC823869044B02DB7729B21092F411B6D
+:105A9000152D5AB483458B0A36F268D106EEF028EC
+:105AA000C65BB4D1A282D536D45B450B4944116F95
+:105AB000B5BF77ADB5F7C9CC393349406BFF7BC370
+:105AC000C7B7B3CFD967EFB5D75E6BEDF5DA3B76E5
+:105AD000D9C5E42B19FB027FA09CA330C60644CA9B
+:105AE00051775EBB687B09FCFE99DDFFB8166967DC
+:105AF00094173389B1D1F09E653056CAD8954EF8C7
+:105B000015DA95BD70EA0F97A531B69F29CC018FA4
+:105B1000C26A59EAB7A09FFD9F333FBE975F706787
+:105B200075B8F1BB2063E98C5DC1F877E16C2DCBD2
+:105B300057881526E373DD49BF433FB99BEAE0FB75
+:105B4000B39FBAE97B2B1C46C93E9759587CF34555
+:105B50000EF6AB7EDC5120EAD90C066702DE2C1A69
+:105B6000D780F7D0DBEF11BC075480578B33BE13BF
+:105B7000E04F8BC0BF9F5D9BC40A39FC7A6904FE6D
+:105B80000B8587E60F786EACD7BE9997CFD8BA7AD7
+:105B900046E5DA7A2795ABEB7DDFCCB331B6B23E82
+:105BA00083CA46153E01381AB7B0501050EF2E8404
+:105BB000F646FFF03F21CF69AA3BB37CA6BA3D0D64
+:105BC000FA2988D455B766AA37BA2739036E1C1F3D
+:105BD000E6EEC0F19D5402984733001F978A79BAC8
+:105BE000B4E02C06EB91E7B66B2180E352F782E933
+:105BF0006C24B6CB27BCD9055E9764367420BC1FD5
+:105C0000433B06F31DE69EF23EF332F69FD94FF07A
+:105C1000796C606C203C5FFDEF751D12F4B732D3D8
+:105C2000AE35407F4FC0F86B1C5178DCAAFEB9033B
+:105C3000FA74C23FC4E3D08DBC1E9937D4A3E631B9
+:105C40008C45BDCF8EF473A1FDE6379BEBD67EF37A
+:105C5000347D12D2ABD16F3EAB68F0B9FFF7F67B63
+:105C600029E03C3525D2AF314EBFFD023954C0B7D3
+:105C7000F91B59289C1D3B4E9EE62F0FC2FBBC8D85
+:105C80002A0B65F3E769C01779FC57D6E49B94109B
+:105C9000288C8587458F93135997BC34FB1C19E8D2
+:105CA000292FE3FA4512D25573D4FAE63066F0CDC7
+:105CB0008FEA7D4C1FCAD8DDF505546EA9F7E9C8F7
+:105CC0002777FF5D99D55218CB8F7F11F2EA1E1B03
+:105CD00023FA0B3ECE428F4BD85FC5AC39505F3FA5
+:105CE0002ABDE82E8D885C4679E61274BC5ED26EC1
+:105CF000C8C1F6AF280CE5A0951FEEB6E9D3B0BF3A
+:105D0000B5A364A901F19CC7F921CF1676E662BF5D
+:105D1000CD39A382D88FFF55E287BCFC4B3405C632
+:105D20001D9627F861F4834E94873DF35F96AEE7A6
+:105D300015339664A103DF79D2816F42DF74F07569
+:105D4000F1C3D7475FCD7DD2D77AFF7DEF3BE0FD32
+:105D5000963CBBA664C7C295797138A3C21D4B6F30
+:105D6000797982CEFC7DD399B57CB03EC4DE011A30
+:105D7000BABF3E83E8EEDE7A8DCAB5488730EF07BA
+:105D8000B0E958A8231DE2B8D71551BDD77D8BAD1A
+:105D900020BA4C9FD5CC50FEDE8FF4390E875BA91C
+:105DA000EB1360AE79A20E5BA40C7BC0BDF87E1035
+:105DB000D575DCCAEE928CF6CF0675C0778A683F3F
+:105DC00075C5B3C146F8FD7E17AF5FBDA2530F6620
+:105DD000457D1F5CA7EB5991F6500F4F52A3FAC3B4
+:105DE000FE0BA3E13948ED8DFEE6AF38A10701BEF9
+:105DF0007B5DBCBFB52B8EFD53FA5F2B053240B5E2
+:105E000060AB2CFDACEDA9DFAB231E8C7172A45FDF
+:105E1000E8C1E8F7C16774DD1D797FB9746F10DFE1
+:105E20006F64157912AC43E6F48A0C06EB6FAF6829
+:105E30000EE296DB039FC077647E0F12BCAE0CFEB1
+:105E40007EC48ADFEB8D51EB3369C5CB4184D7D05B
+:105E5000731441AFF20B594B8F00BD2A49763FE9CD
+:105E60001BD701D364C278B32A980670C969150C90
+:105E7000E58192A6BE1BCD0706FD019C6309CEC934
+:105E800015B37A8133180DA701477F701B70F44E4C
+:105E9000A77C7C2B3D4DBA66CCEF26C0FE6D6FB75C
+:105EA000F9515D48453C4157ECF35B8336789E3AA7
+:105EB0001370ADD1BACD62B9B1FDA64D1FC4425128
+:105EC000FBF73F7A5DF3B0CEF116885E5FA8CF9501
+:105ED0000644F03856B4B3D29F313F5BCCFCAE35AC
+:105EE000CD8FA9818C0A4FFFF3BBD7E59F55E18E7B
+:105EF0006DF75B49A2F1274D19F36DC6C7630E908C
+:105F00005FC9385E5164BCE469301E76A636C71D91
+:105F10002F65328CE7FCFAF069E547035E7B0CBC29
+:105F2000B79AE05D6B03BE8DB3FE5F37BCE7CB7FF6
+:105F30002E90BFC47F797DF3DF3FBABF64FC153E6E
+:105F4000F94865E12B015F775CE524FDDE9073FF86
+:105F50006C7CA5E2A7B07E77BC547CE24A192B404A
+:105F6000D72322E3D74A1AED57BDD1776FF3810DBE
+:105F7000D6D4CFFFAFF9F486D7AF5B0E9DAF7C6D63
+:105F8000783D81213FAD2C642107F4B1B2ED2AB2F6
+:105F900037571E291BC8A05FDB9AE14C8749256350
+:105FA000FFD0DF4A43CF985CD24FFF5CCF00FB4E5F
+:105FB0006F02A56BB7B782F4A29512A3EFD783DE69
+:105FC00016023DA6E4950DCE3958F7EF70CEC1719B
+:105FD0006D8CF4E992570EF9CA80CE5D23524629A2
+:105FE00040022B5DC6F3A3E5A8E7DE55289E7B782B
+:105FF0007FF0BC02DB2788F6BDC1959007F044AD69
+:106000007FA2BD395011477FD76599F0F390D0BB7F
+:10601000EE46BD0B047262424B00F56A57BA5D7BD7
+:106020004C8AFDEE265912F306BD0DEDEC115332EC
+:1060300051CF3A30E389157684AF90915C77E5854E
+:106040007419EAEE02CEDB0F59F67D37AE21E95D19
+:106050009952994ADF99EA77F7E831D913516FF3EA
+:1060600016F0F7650D574C6C8C7ECFFC1371FF3525
+:10607000DE071A4AE97DA6B3E2D804183F13E468A4
+:1060800023E02B536D96EA685DD3E2EA8F1BE63B73
+:10609000678500860D331ECC9E1F673F81D534F186
+:1060A000E9A079663E7B48E0EF6E81CF4CE4F5D104
+:1060B000820E41BEB978D31EF9E61ACAE55B4241A9
+:1060C000F30AC4F7A079CC8FFAF686194F90DE6AEE
+:1060D0008CE32A30CBB94CD53CAFAF6B3E1B99FE5D
+:1060E0001D7974EFFD5BF96C230BDC8AED33C57E03
+:1060F0009E5010920285FDCFDF3ADFDEE6FD2DC413
+:10610000271FA74E1E103BCE3F0B2F996E18A7E4FA
+:106110001F3F4EC23CB3BC3C5FBCC33E20E88C2951
+:10612000B81F58EDAB84129FC464AAB6A31D4EF2EB
+:106130001BE0F6B0E6F24B80DE522B56DD2E83DDFF
+:10614000EC79EBEAF7D1CE4EED9843F676536151F8
+:10615000DB246897E4F7CD984274CA08CF6BB1335B
+:10616000E2BBAA1513615E8D8CF3DD66F996895C3E
+:106170003FD069BDBF2B70062BAEA950477665395D
+:10618000F1E66167613E6FE90B47ECF7BDCDDF16C5
+:10619000F94EF8FF9690DFB4BFEFD8743BF9118346
+:1061A000F00FEDD2644B3F49BA3DE2676488A7A87F
+:1061B0003ABCFF6D0F5FDFFE4F19CFC7EE736A4029
+:1061C0000AB63CD987F67A12F325AB2867278342B3
+:1061D00000A2D897D61D94B5FED7A589B1F29642F4
+:1061E0004E7733A2F4DC0E99EBC969332767AF848D
+:1061F0007ECF9670BF70AA0FFE17C5CE671DEC6BE1
+:10620000E1283FC7BAC2C7887F1B819E72802F8258
+:106210008532F9B7D7E6EDF045F3B5AC18FE6D2B36
+:106220007D304D2D15FA1FE047C99375D7C8AF4E85
+:106230001FCA97A48FC4E951DFB10B5FAF24E5C239
+:10624000E8E3AB8E67AC6B2C5F71FD246DE63C27F9
+:10625000EA3BAB326626C593B3BDAFEB7DB4AEA8C7
+:106260004F84E2F49FA64871FD39567D9EB1A5A6E4
+:10627000F5520696CEDADCD7BAA599F161F4EB5A5D
+:10628000A668FF85C24BF5915FDC29FA5BABDD1791
+:10629000C4FDF32CEEED800FA5795418F53D96C79B
+:1062A000FC8FF326A487B8343D443A24CADDD208D3
+:1062B0007CF62CD9349E9A9660C2379B05DA761408
+:1062C000FCAE657682C389E3C1388A0F3A94D0FF69
+:1062D000CFC22E2FF548FDE1505FE462FD4E131D45
+:1062E000ACCE2A8ABBDFA9625DD16CE5F47AE7F90E
+:1062F000C917EB78D799E13DEFEFDCAAF66E1CFFEA
+:1063000071EC772A7BD7C01720F1961E7AE7EBB4A1
+:10631000CAC6F64849200F32AE67010DEAF80A36C0
+:10632000EB35588E453A2CF2915EB05552114E62C3
+:10633000690DFF737DBE10955BE84F7606084F8AA6
+:106340005B67D45E3B3F7DFF9CD0AFD3843E6FBC88
+:10635000FFA162A77E5556C1D06E3EF7F6D40CEA77
+:10636000578747A51138ACFD162A811F2A0390ECE8
+:10637000383CF801FA09584701F9B5F305CECE3D8E
+:10638000303389F5C15F0F59F8EB2189C3C92ACE93
+:10639000CFCE380763B6637B359040F1B29305C426
+:1063A00007B962FC27D6CF4DC0F19FD8D8379F1BC5
+:1063B00070FCB4DEC9C2A0A786EA7D541AEF43C2BE
+:1063C000DFBF59D831C6F3738A4C70EC137CFF845D
+:1063D000B32281FCE7076F9C360CF82BE7A8E24755
+:1063E0001D4F5BCB52FA1A3F3B68E637A6CCEE1343
+:1063F000DE656F4D9C71288A1F7FA178D2DE1D0E4D
+:10640000BF5CCE2E47FAEBEFFB73F5FA8C43F95FD6
+:106410001D2F9B85FD79AEF1772B48CF095F49FC95
+:106420009923E448CE3C2E0F72AB594843FEFDFC45
+:106430000B164D1F6099109E32AB558DFC4D4C775D
+:10644000CF81F743C5DB4C65BA8C5BF850D4BF50A5
+:106450008E6CE2FE73C3CF0FEB7E17CAB9CDAF29A6
+:10646000640BE7556A0DB8DE39EBCDFEFDC12CCAD1
+:10647000EF8EFE7AA1D7655AFCF85F751D3A701D44
+:1064800012FFF9EB105219D19D51D72456116FFF0D
+:10649000FB44D0A9B6E210B743C0F87B272A1E01FF
+:1064A000EB99829BC04F83F74D44BB35B886F9F317
+:1064B000E3C84B9B9A48746F637A7828FA0FE65CBE
+:1064C000DFB117E5D50466925F71E4864DC5EFD262
+:1064D000B8DC080567F2F27385E265F9EB5908E369
+:1064E0005B9337D4ED47BF5E6635B79B33D7042542
+:1064F0003BD473EA981F87C9AD64BCFD6C16D27992
+:10650000BCE66806D0CD104137430C7A5966A69791
+:10651000C17596B8D01A737D20D2057C37D0422F32
+:10652000D67E723446F1B8BCF5328F17CD32C77DB6
+:10653000F259F7FB3F0778F30FB9FD61161B6FB2F5
+:10654000F6AFB24001E265F70FDDFF590013FCD949
+:10655000FA49A98817902749244F2AE2DB3D31F4F4
+:106560006AE81BBDB48FC84FDEAEB7F7ABF2D39766
+:10657000CE0538D67A7446E307B349AE2B225E794E
+:1065800030F37A6707FA6DDC4524DFF7631DFD3CC5
+:1065900019970C8C96F78AF02319F546E147B28ECD
+:1065A0003755E57AF07B4C9F8A7818E50864605C83
+:1065B000CF9691BE730E8C67F381BE15E7BBB16AAF
+:1065C000029FAFA6FE2D1AFFB071FB481E32BE1F00
+:1065D0003377CA79E1A3440DDCA442199C04660414
+:1065E000D27F0E0B35E2FAD635F3FD2DD2EE16D161
+:1065F0002E8879053DED02D06E84A9DD3C9C0FB458
+:10660000D34DED2A62DADD26FA63A671F598716B37
+:10661000447FA4CFF5B4F3C7F4B754B4233DB0A777
+:106620009D16D3DF3231AE6E6AE78B69F7EF067CD9
+:10663000A6719979DC9EF7A576E33DF9630FE44FE7
+:10664000217A39943FA57C2E8CB3F4451B97115BBE
+:10665000793E874157FB45BB26A4AB42CC5B6163C7
+:10666000AA294F85E7AD34BA673A0351CF7BE8CA10
+:106670003DD317FFF95C537B758D8BE9C5F49CDA2C
+:1066800037FD5D11F1AA1F4C427FEBEA3459F8DB6C
+:10669000AE69D05590630354537D4D86786FBBA689
+:1066A000810262223E02B2F29B8551FCDD33FE3F45
+:1066B0000B7EE13F8EC03FDB02FF6C33FCA2EECCD1
+:1066C000E4EFD595B327E17C0CFFF2D9A6E50D41A7
+:1066D000F7FFE6F95559E65765995F95697EF69596
+:1066E00055938279FF97E6B7CC32BF6596F92D3383
+:1066F000CDCFB972D905AD9FB5DDDDB66692B76B6A
+:10670000F35F27FD7FAD88E326ACD41B56E07BE02A
+:10671000ED76EA4F23F93E8AE99FA33CE8EFBB47B9
+:10672000548DE482D323935C60F9F6507E36876BF8
+:1067300026C885E7541F97DF02CED72CF50F2D759D
+:10674000F8E56FB86FFA9861475AE47C3FFBDACA04
+:106750004CBE9FACF2F8E5E87D4D15B83938A094F1
+:10676000E44FA38FCB9FFD03843C4A837D8DFC4483
+:106770001924AF6C425EDD57CFF3D89A457E506343
+:106780005A11E1A759D80B2C9465DA370F4C9CD2DB
+:10679000867EAB334779DEE23A1BD7C756D6339DA8
+:1067A000E8ABDE49F945FBA0DF003468057D0FCB7F
+:1067B000E741DFC3724F7D0695BFACD7A8DC01E38C
+:1067C00062F94CBD9F0560FC6DF563A8FC31EA8B56
+:1067D000503E20F4C52BD264F2576CAE872D339F08
+:1067E000F4482A1FA9F78D5561BC9FD46750FD233B
+:1067F00069E6581BD9AD1D8D4900E7EE57F3285FB8
+:1068000069429A4AFB2F53C34A5249E4B981D78F50
+:10681000A44957E077E33264DECE196AF4C66F57B5
+:1068200086EDC664A8040F7307156F5ADC76E5364B
+:10683000C04BA95BF4E70B347AE2F7F72D6C57E411
+:1068400016FDA5698DEEF8FDCDC47147FA381E58C6
+:1068500046474362FC763760BB429F986F56584E5E
+:106860008C3FEE6C1C3725A53980F1AD2B6733D2F8
+:10687000476D69DA66292A3E141A50C164A0F39460
+:10688000D4E63A6CF78D809FE5C0F89AD7CF64A024
+:10689000679B1BDE17624E138F478DBF0EDEA33E34
+:1068A0008CEF4744BDC7EFA11C3B4B7C9F647EDF50
+:1068B000A397AF613D793C98BC646B32D79365CEAA
+:1068C0009FCB571E98847C9F6CE7EF7F8A75D4B767
+:1068D0009633431EF1F609FCFD8F8CF65EFEFE1723
+:1068E000A27D4A0A9FB76B8A338471B147BE7B4948
+:1068F000E6DCC2C87C2FFA5EC1B0B951F37BE47B01
+:10690000E332E7BA23F3B9E8FB1386CDEDC3EE49D2
+:106910002D977B7264516E25371792FC1CE5A820D9
+:10692000B9336A60A98EFCACACE770FD87EDAE862A
+:10693000863C822B88F2C680EB278BCD700DAE3162
+:10694000C3F5931A335C836BFB866B9D8DCBB5DEF1
+:10695000E083F1F5E8F11FFD37F3F8437E601EFF99
+:10696000D11F98C71F72E7571E3F1CBD2E9B6E3765
+:106970008F9FB5C43CFEA625E6F1B3967EB5F1FF28
+:1069800051FA78922D70C426F45D255AEFAC0B981D
+:10699000F45368F78A681754A2F5D840C0A49F4200
+:1069A000BBD76D42DF35B5AB8869F707D11F338D93
+:1069B000ABC78CDB21FA0BCBD1FDF963FAFB8B68FB
+:1069C0001794A3FBD362FAFBC080CFD4CE17D3AE0B
+:1069D0004BB463A67199795CF82950A19FEFB30479
+:1069E0003FFA47964D5E4371AF812C20A1BFCF97F0
+:1069F000CA461D82EF592ECFBF4F9EB2EC62B43B08
+:106A0000D7249BFD5CE9766E9FD9EC0A95BE44566F
+:106A100047F900CE60E68CA87C8B6A3BDFCF7ADE3C
+:106A2000BB8399D746BD1F28BE5F23E2D469F6D247
+:106A300046942BBEC1D03E8EBF22538C6BBC67697F
+:106A4000FE761DE0DDF8AF3347A3BF2832AE8DB729
+:106A5000BB588C9B151FAE35D97CDC45386E213E6A
+:106A600037F48B6026E1D7C74BE3F9839EEF49FFEC
+:106A70000578593DD9292B49F07E3DF76F1A7EF6EE
+:106A8000647B9D13F3761B2F92D963D82EAB6F3F97
+:106A90004E53BDD9DFA9FA2A74B4F70655FA8A1401
+:106AA000D6FB770F97CBE5F1E20DA3C5BC9A2A2759
+:106AB00035E7C1F8EC90D96F0B84CDA2F3610A954C
+:106AC000C0687B3CBF6D538129AF3E7950DF7EDBD0
+:106AD00046A15FF4CC033A8AB77E370AF8D8C602DB
+:106AE000939E959C3293F4ABE486AB9DBE38DFADAC
+:106AF000B5F4EF6233756C9798D6CC64EE5C34E9EC
+:106B0000614DBEC7F83E94093209E33F693BC2C8F4
+:106B10003F674BF8790A3523149428CEC1E7896A78
+:106B200025FE24AAE1A00CED076D54593895B1FB60
+:106B3000E5C08D881F575E33F9C7549F2E219ECE26
+:106B4000D94257D379025017E3E57FCCB3733FF0B6
+:106B5000C3DACCDF65C759C7DBEC9A492F1DF4A90E
+:106B60009D858B7B6F1F69C7E1EAA1D30CA04FE421
+:106B70006F8DD3E9ED8ABED84EFA5A968FFC8E8679
+:106B80007C35F85FC4B7E78E61E247BBE10F308F19
+:106B9000DBDA6C3CBFEF73681D15F7B94DF8BFE643
+:106BA0008A78F73C56E1C597A7995C8E7C759ABDAB
+:106BB000EA2D8E5AAFB5763B1F678D8DFC5B463C48
+:106BC000777EB3CDE4EF5AB8D15C5FC066A6A35C14
+:106BD0005AB0C1C6F07CC76D167FD8BFE17C615E3C
+:106BE0000B59DD2AD4D38DFCA0B93EA662FEF7E294
+:106BF0005F3D528A7943CD769EAFF301D08B16C5A7
+:106C00005755EE901DEDF97776155F3F9EE1F7A1A0
+:106C10005583509E26B3B8E78C6E5D6386AF3FF810
+:106C2000ADF032D640F0F60687BA558AEBBF7AD47B
+:106C30002E99E244CB9CDE910CE4CC39172F7BFCDF
+:106C4000297F74917CDF27E80836C0CBB89CAFBBA6
+:106C50001CCBFEBE3BD8CB778B9D1D76E48F5AB5FF
+:106C6000AE5C92237126872DA00F86EF6C7B268663
+:106C7000073353BB35E7D9AE4DCA39AF76E5721F3E
+:106C8000FD750A79F9C2B69FD9D1BF78FAA913D791
+:106C9000201F2EFAB5C29CD0AE739B8785715F50C2
+:106CA0004376942755BB94B871598AFCC3FC17FDF1
+:106CB000C24372A26A8723341DBEAFFAE53B231993
+:106CC000E0A1B3A1FBF060DC479F92787C34D8311F
+:106CD00012F7AD2A95DD122F4FEC84A0BB53CF25C0
+:106CE000CEC27595B6EEBF99FA6DB9C1E688920F1E
+:106CF000C7C4BE04EDB87FED4929941F477E18F143
+:106D0000AC534F4A1CBE3DB6900BE1DBBAD91E0016
+:106D1000386AB77E487454F68BED5EC443ED1EC5E9
+:106D2000E4F7ADDDAA841D23A93C8125C65124E0EA
+:106D3000EB1AC6E563CDAEC5E40FAF6959F7A1E222
+:106D4000C5EFCDF40C78F18711AF6F28FEE958DF5D
+:106D5000F973AF06A8FAA0FD712FE215FA9D634FF3
+:106D6000C278AED98F8DFD7F9A12DB1F63DD76A4CA
+:106D7000AFDA96B57C3C0BBF7C80BF64C6C64F9C27
+:106D80000E4B1C6B6BEA79E9898BB69F7D3408E367
+:106D90009DDAF1D74783B87FFFBF8F1EBD13F59AE9
+:106DA0007D2E1FF27BED53AF7959D43E98E3E07C02
+:106DB000D7F9E4CF9F7818F8A4F3B8838EEE75EE78
+:106DC0007D6F8806F3ED7CF6BFD335687FC7DEABF9
+:106DD000C8EEBF6377D9C0BEF643A4D350F43917C9
+:106DE00091C7A4ED9150D902435E94967539B84B82
+:106DF000612E80F3F4314708F39A6BE1D9B2225C3B
+:106E0000A7C5247FB1BE1CF05BB36DF587CAC878F7
+:106E1000780E0E9631C79E01BB64E03A5FFBED6FC2
+:106E2000946069A338492DEB26F969FDAEF628ACCC
+:106E3000E765BDAFDF59F6B91D8378B5DBD6F271D2
+:106E40002DEB771A7F191BBB7EBA65FDCEB2EA9F88
+:106E50003E8C2F77A5C68DE71AF1AFC5BBFFA54FB6
+:106E6000BDC99003FDE1B752E270791C7A8503F940
+:106E700069C7D34F3C9CC6D7773A20A473FBD9216E
+:106E80000CE8E3A4ADFB66948FDD7B1D3EDCCFAB4D
+:106E9000F6BE41FCD5B9FB15BB46F291B925D0131E
+:106EA0003A59CF4F3BEA0D3512AFD46EF1841DDE57
+:106EB000C83AD58466946B5E7A7E829E8738DDD729
+:106EC00084F65F27C559B7D58E1C2E8F433C696F5A
+:106ED000F1963FD899DBBC9ED2185CC71353F0796A
+:106EE0006FEB68CCDF87F3BF3C6A3DB7707EED8DFA
+:106EF0002F3B373B54CC4730D6B7D3C6F5FDDA909D
+:106F0000F4068BC3AFC6FE76A1F1D00687251E2AF4
+:106F1000E6DB1F3FF73F8F0BC3D3124CAA1C1D8B20
+:106F2000AF539FC797EF8F382401475DF9A0DCD896
+:106F3000FD496515C1C1D911784F8973B3A79E5218
+:106F4000424178BEAAE520C969AB5CA8E9454F7EFD
+:106F5000C6186FCFFE9128BF4E1D788EE8B066DB55
+:106F6000093BDA4787B7EEB4771446E81EE57F742D
+:106F70005EE4A967F68F24398DFDC7599F5F0B79B1
+:106F800057DB6AEEBF76DB87A6FE17055BECE417DE
+:106F9000ED679C0F54FD069CEF07ED368679F71FD1
+:106FA000B428E5F1F49B90C366CA835AE5293D866F
+:106FB0007E4525C5AEA1BC6B5AA1BF11A4738F3607
+:106FC0007EEE51D58F39802F1B93ED1ADAAB4D9E93
+:106FD000EB991625B79B2DF8F4A5F926625CCD3701
+:106FE000B9A224DA7E32E04FD66513FC7778CA075F
+:106FF000E27909B4C3344C3250FDE45756BC53CA4D
+:10700000713E8A4FF6B9E2EECFBC3FF4B721FDDB0B
+:107010007C32D3A2E86B54D9F5C3D1D5A632CD9436
+:10702000BF7AEF641EC735E67FEF456C1303B97B6B
+:10703000AFD4DD86F9ECC1AB795E201376BA17EDDB
+:10704000F4EC587D8EE9BA86F287C40F6FCF7423B3
+:107050007F147EBE0FE0C898BF23FB4999FFBEA2F4
+:10706000533E8F1DC7CD45FB2944CF135998EA8A5B
+:1070700093CB1F0FABA3E749ACA319CF30BDEDA84D
+:10708000F8D401CFEF2B4F9138DC61CAD74816E313
+:10709000C88959997DF13F9BAC9E8AF6FB38D8266A
+:1070A000B24BD0EDF8456A040F463E9CD1EFBDAE21
+:1070B0000912EE3738BFC178AE479C9FF7F5CC5721
+:1070C000A7FA00A36E19075BFA4AC5164BAC1890D5
+:1070D00054056F0D68263FC720D64265166BA73250
+:1070E000C5E9935482EF2DF24BC9ECCFEC8B440BE6
+:1070F0007CE7A18F9F93F5E301281B6DE2F9DB9EEE
+:10710000D0E350DF90CC4CE783739D9CBF2F77CAB0
+:10711000865F26106D7735B26A9ABB2B8D1F63315F
+:10712000BEBBDE1918EE8CA227C5DDCEF3BE84FDF2
+:107130006BD8EB5729CB29FEBE3A83DBD5BDADCF4B
+:10714000CAFA0A935D6D2D9B0738E76C66043FF71A
+:1071500053494E7E7E59679A2F9AFE605C67697428
+:107160003EA3AE937D2FDEDB607AF8D28178546245
+:10717000E96F06D2DF68A4BF0ED14937F9296E57EF
+:107180000257E37C33F2EA24FE3C2071BF97AEE065
+:107190007CD345FF72627566A08F79B259401F514A
+:1071A000792D1B84FDA8AA4C4D284278368975B7E5
+:1071B000D2A5393FD5D0D7DCA2E6107972BF2979A4
+:1071C00095CEA3A8696ECA4F719734DD8EE77C55C2
+:1071D00056E743F9E936F24FFC3C9FD0B08B5D0592
+:1071E000E63C4E87256FD526ECEF983C6EB1EFDE7E
+:1071F000830FE2E8C3D67DF77667FC3C2436267E13
+:10720000BEA0A1879D2FDD5BEDC86A67FB611ADC1C
+:10721000A7539EA52AFC0D13AFF3911FBC6B9BC413
+:10722000CFAD59E8A86B47D2489487C8BF78CF45FF
+:10723000A2782E6DDBBF1FF5A6262FD3935348CE21
+:10724000694A2E9E971AE594A05CBCEBC3977F8D8C
+:10725000FEF55685E1D6DCE536E2937A322E5622EB
+:107260005B6F5ADF0B9D4F6C5C91F3DB129FC16F1C
+:107270006EFAFECC3689CE4F296CF88FF1FC436D47
+:107280009B8D85E0FD19C6FB3FB389EB030B5F8443
+:1072900051F03CA8181FF7A5E8FD23B53C8169D142
+:1072A000793C41BD1DCFFFCF13F8185091627AFF92
+:1072B000D7B9E56DE49F09F07B0006CE1A64EA6F4A
+:1072C00091B27C2825E1093F8606FF90FE8CF99F4C
+:1072D000930376BE4F542485499F01FB17ED86909A
+:1072E00044F94A567F47CD1E89F6A7DB607FC2F37B
+:1072F00038B7852CF6A3258FCEC0B7952E0F3985CC
+:107300007DE066EE5EF0EA0F97507C94F86AC98BD8
+:107310003C2F6CC976294479CC1D439318E159213F
+:10732000BFD17BACEE41D83922F46BC19B23C38C17
+:10733000679766C673628119AF1EBF198F563C27C7
+:107340008DC931B55FA454DB89C8049E0BE01FE2F0
+:1073500019E420CDA306E611D662F159D97AEF2AB5
+:10736000F46FF48B470BFE4E59F07796B5EEE76F4E
+:107370005985339D589BE69DA986897FACFC66E0C4
+:1073800029CBD73E919EF93DE42FCE109D48F3F8CE
+:1073900077839C2D9C798AFCC46F467E7062CF7E79
+:1073A000F90EFB02CAA5330E9D98CB62F96B1396BA
+:1073B000C0D72DF54EDFBC7C8C4F33DF3C1BC6ABFA
+:1073C0007D54C6D947A97FA047DA0FEEC1B8641A29
+:1073D000F2B54AF12B5CAAE9504F6CB5F9D06F7940
+:1073E0004F51F735A8B7D7CEE7798E372770FFEB27
+:1073F0009204BEBFDA12785EF35D1532D3D1BE6F50
+:10740000554212FA8B7CFA8B57A2DED56AD3685F9D
+:10741000F375BFFC1D7A5FECC3F86EA6DC3C0AE195
+:1074200080F6E46FEF6A7DC77B6B94BED3B9E7FE4D
+:1074300061B8EF3C24B3CA787A7CBE8BC3D159F0D3
+:10744000E77424C7C5CE6EB2A35777D455E0BC0C01
+:107450003BC2BE8BFBB76AF6CC207DF2D0027E1E0B
+:1074600073F7297E1E738A32FB9B23A03EF6359567
+:10747000CB4DA64F9F93CE5328701D3760BE24F28C
+:10748000C17FC9A106C24FF3EF314ED5F81795A1C0
+:10749000FE5852B780F69F5F7BA7B46159AAB71414
+:1074A000235F4F6E4D9E88E7646ADFE27995A3DB28
+:1074B000CDFE1CA6541F443FD8D9637C5BBEFC980C
+:1074C0006AB5BB14DC8FC776989F8FEF876ECB5C55
+:1074D000623FF2B2F40BC98BFD91AC4F73917F9474
+:1074E0009FE3F2ABF1EDA74713B87D037891504EBF
+:1074F0007575337F03E0A96BDE209A6FD7C7FC6AEE
+:10750000A6AECF95F278F6D12D2E4E2F0FD979DC7D
+:10751000F6A105EED00A98C781055517A35DF4C9F9
+:10752000BF052E8E17A788D8072C49A63D4F4F625E
+:1075300063902F9AF8F932D69C19EFFCBCC10F0664
+:107540007F187C91B9202110CF7FF98E8BCF6FD21D
+:107550008202CA83EDDC27518CA7B301E0EA038FD6
+:1075600041D63018E1A9DDF311F9179CADF1FDD03A
+:10757000F5784803E9B621B8623CE0EB7BC0D44122
+:10758000E4077B7376BCFE836C03F99B16B834E288
+:10759000B74E27B7A399DA9C39D3837C5276F52A64
+:1075A00080F361E03F24F9876C7E823BB89831F22A
+:1075B000AFAA9CFFB3AE619BEF8AB2B7D6BA263EA4
+:1075C000E082FE1E70F178476AC02F21DCFEBF9F6B
+:1075D000F362FF5D9F3A68FD06093F8FF15D8BC046
+:1075E0004F5982FE23FC9E55A69130F407BCBE790C
+:1075F000B0FF5FB607F01D27BFCBD077520220FB4C
+:10760000009E14B74CE756D0DE427BA296193F414C
+:10761000523E0DFEC34366783ECB90B752AB14F694
+:1076200080DC2C71BAC3E84F49A98479633C8A395C
+:10763000797FED667D14252FCA5D94013C599EDB50
+:107640003B861C36E477533297834DF7AAA146094F
+:10765000D3DF3B5CE83FCED6B549985A95A26A94F1
+:10766000E7705125F3075148E63E92DCA3F78C679B
+:10767000ECD9BF2B71FD1B275DDC1E294B08FC0AD2
+:10768000F135B2ADFB00AA4F7E174BC5F59E22F433
+:107690009BB1A7B93C32F2FA6B85BD619547CF012A
+:1076A0009DA3C018FB0DBEEF8D3DEDF623FDF4C884
+:1076B000A10553681F2D6A2D3E88F939456F717EEB
+:1076C0006442FE80F54678296D0B2A880FABDCE911
+:1076D0004FDE18F2C4BACEA05CF7D4B30029C56D52
+:1076E000C06751FBB7554E1D7389FD55C8A9B36CD2
+:1076F000C2C0ABB4083D152DF31F7444D18F21A730
+:1077000022F414223AB48E2331674FDD978BF2E5D1
+:1077100088827E90AE893C3EB942F051F2C7A1AB5F
+:1077200071FE1B5AA7BA90EE77B4953991AD966465
+:10773000F0735EEAFEEB824C904F745CD7C69C1AE5
+:107740009E291F0F2B8FF8507C508F9AD79966492E
+:107750009C73D492AE8B733F82512EC9E0E7B8760A
+:10776000B4E524713B334CEBDE43F7C20F61F08587
+:1077700041EF56FA36F8A19171BF84A13F28528B90
+:10778000B00BCD7E8146C3CF1174519CF80EA10F72
+:1077900036BA2F5937017E6D0A4FF2615CE20E4F07
+:1077A0000EE533DF3180E3CD8A07A3ACFD14F4C3CB
+:1077B000A8BCF35AB59BFC5AB59FDA4DCF0DBCF669
+:1077C000860F03AFE310AFD297C7EBA7B8BEA36392
+:1077D000F1FB65E79DB5644CDCF372FF57E63D9E17
+:1077E000057EDD4176173FB761D097212F4A976E0E
+:1077F000CC24E26837DFEB65C891317BEA0EA28AC0
+:1078000068951397B5B26B114F63C32AC3A32EFDBE
+:10781000C98D8FF1974C3A7F716302F0DFA817662C
+:107820002DDA068F466A2C753A0035B25D2539C6C9
+:10783000DACF2F0ED512FE381DFD8B865E1A8357C8
+:10784000A1971AFB8B11075A9710A8C4F1A53DC048
+:10785000375ECC3FE5F6EE5A57605102B44F0498BC
+:107860001330D7AE209CCDED53335FF6C687891613
+:107870003E6B01BCD03904D8E7F2A558388CF1F33F
+:107880001292399C406DA8BF6495323E580DBFCF0F
+:107890002E6B240BE03E8CC736719E6B85FE759770
+:1078A000A55CEBAA68C079D9541674147D79B80D1B
+:1078B000BFE0BA043D88F87096EB348FC13EE647CE
+:1078C000BD7EB0DA22F9018E946A4DEA71D618FBBA
+:1078D000379EFB99AE4D44BA189CC7E83CEC60D487
+:1078E00083E2ACCFA6041EAF5DECEC388C21F3DA5A
+:1078F000E975E5DE3EE2D3917B06FCC24F65CEC35F
+:10790000E8DAFBC64518977CFBDF3FF260DCE94F05
+:107910006AB707E13CB9FCF71EBCBFE5EDE5DCCE7C
+:10792000B8D9A2CFEC14F84B4EAC780AF1774BFDE6
+:10793000DF4BA3F99D2DE37194DB420A1A9D3DF4C0
+:10794000BD686B22F9E68CFAE2965453DDA0D3C5EC
+:107950000E9E27659DFFFBC28EBA6DDB66FB600D38
+:10796000C70FB422BE4F0A7DEDE42E0FF9330C7819
+:10797000E66E1B65473CFCA9D521E2F0ED368E7F13
+:107980007D3AC6CF026229AC701EDE9748FDCD7FDE
+:107990004021FD620E8CB50CE83BD07A1BD9D9D6BC
+:1079A00079CC7F5B9B3210D66FFE5A89F4526CBF44
+:1079B0001CE821B06C35C5D9ACF39C13B4C6339721
+:1079C000939D6ECDF398C7B47513B2E3E47BB4F224
+:1079D00038F9C27EEC9A3F26087DA1945D8EF9E8C5
+:1079E0006759E18F0AB5FEED9A93F58C92B43EA8E3
+:1079F000775279AADE47E553091A8F67EFD97F9846
+:107A0000E84B6D2F457EDFD1F64EE24D5A446E5F56
+:107A1000B1F9A3833F817A31E3FE1BC33F3E5BE0B4
+:107A2000FB4A21BF170A7DA0F8D3BEE5F76C9CEF97
+:107A3000C858780DB93D1BEF958DC28321C7ADF8AD
+:107A400038D3969B887421255AE3C05F0D2FBD7DE6
+:107A5000B758899F3768F0CF53C21F306FCB8C5512
+:107A60008360FCC6BDEF0DE1F702B3A3281F0CFA3B
+:107A7000B4D21F637576E4E71E3A6BBD9BF063D00A
+:107A800005F05186883F66A0DD67A5B7FEF2893A0A
+:107A90006D1D43500E58E9AB536271EF154D4DE427
+:107AA000FEF2799A3E05ED50D85E56F1381D973FAB
+:107AB00027D5E6C377227F6EE1FCB1F857DB7F89DB
+:107AC00072A7EA170F7851EEBCAF36A7E378D58FCF
+:107AD000AFF4629CFBA41AF4E2F7EF8794B87985BF
+:107AE0000B1325E10F37E72BB035C16B906F3F7952
+:107AF000DCE6433F43ED56078F83EFE278833A8F0E
+:107B00007FEF8A9FAF50F5F307D2359EC76ACE5BF1
+:107B1000D862A3FC13F497E130BDC5717BE2C22D9E
+:107B20007DC7B76B77AD8B9B7762E40758E9F606A4
+:107B30000BBD025EC88E09023CE4161771EBC62726
+:107B40007F3CF204C0756ACB6FBD5261B4DF9CC745
+:107B5000C7CFB4DCFA530CF1F446AF9D82BE237A52
+:107B600043286E1E43B52DEC453BBC7AB38DECBA71
+:107B7000EAED0A73623ECB7107EDDB8BB6FFE6F5EB
+:107B80007100DFA2676D69D3F934285FC158A79EE1
+:107B90003C12B12E553B7FC3E3BD9AC82711EBB30E
+:107BA000E8D9FD76CC8BB1E2B1AC65BFBDC3928F95
+:107BB00040EBD472620A9DCB7BF29C1DF7D3F7F7A2
+:107BC0004974BFB2F5FBCACDBFF1A27C403C515C09
+:107BD0005EAC57EFF942E16B9E2FA176E487EB6D27
+:107BE000FDC6E0DE3A9AE8FB99E761FCCA371D94CE
+:107BF000AF54F9CC52CAEF794FADE374FEC8CA74E2
+:107C0000DC5F2B6DC1741F95FC79E5A3DF25FA5B62
+:107C1000F8CA77D3F9791E3D93FB6D829938BFF985
+:107C20009BFE85E6B7800588FE2A1F512AD05F7229
+:107C30005665E5CFC6E1933F093E79EF310706511E
+:107C4000D97BC26F197C5511F7FE5AE349FCBE95EA
+:107C5000B3C28EDE95281BF71439A3EDAADA2DAB3B
+:107C6000DB717D3EB8481FE8A3B8BE1A14F89248ED
+:107C70001F7FE5AA81428ED13D31869E5386CFB1CA
+:107C80007DBB8DEE8B89FACE74DFCB1D627C803B91
+:107C900041BA0CCAF4F8FE4C8F5B32E0E3F92F06D0
+:107CA0007DF5C6F75B783EC9C747B95CC1BC187A99
+:107CB000DF6E0B0F34E5C3384CF78944F23D6C821C
+:107CC000AFCDEF014ECA57E9C1EF3E89E2AC0B36AA
+:107CD00038CC79703D7463BDE7C69CBFB2D0A26F4B
+:107CE00019A5552EBC69910B6CD3F9E5AF54DB4255
+:107CF0009477547DDC41F643F5765B05E2E3AFDB38
+:107D00000EBE7E13D0F95F5B0CBE35CB572BDF5612
+:107D1000EE18CDE2F1ED5FDD7E16976FE1795CBE86
+:107D20007547E2111AFBFAE4EBC25EE4ABE28ED1D6
+:107D30000792302FF783A7165D4C7E060B5E0DB9B8
+:107D40006A95978F246AFCFE8298BC3ABE9F47F2E0
+:107D50001D39FE0C7AAC7A7A318DD343B7065D1AA1
+:107D600074DB4B9E96158FD6F72FA23C1A10EBCFE3
+:107D7000084E620578AF5EA39D15A0FF392827F84D
+:107D80001FCF8E93D7C1EA86A29ED1E8CE8E9B9F4D
+:107D9000EB77FBD08CC573654ABC78B7BF4C8EAB14
+:107DA000C797B8B95CD98BB40065B59BE3AD49C43E
+:107DB00057C012A4BC7FF429123F257B899F6CF029
+:107DC0009CD1B94A3F9DDBF627CA1F69A08255B8EE
+:107DD000B5292AFA538BE5A5B9505FE82EE6F5F1EF
+:107DE000F2CE1CA8DFE62EE1F5CBE4621B90E61391
+:107DF0006CF494C950AF31E6392FC9E4DF50E51374
+:107E00000F62DC457D9EDF17B70EF8DA591489F74B
+:107E1000263A58D05584F7344209F555D9BF5F85C5
+:107E200046E00647E01A37C9A3491AE2F594CF495C
+:107E3000F932773C7715E56756BBB9DF78F8CEF1B4
+:107E400074FFEED730FECDEE01BD8FDF64E3FD9C05
+:107E5000DA31BC0CF13AFC62467E0803FF45AA46C3
+:107E6000CF5D2D78F494F83F03CF7F3426DBA99FB4
+:107E7000EA9EF53ABFB251E43528899C0E9424B9A4
+:107E8000EE5928978AF5BF43E0037FD05EEEDA3BD8
+:107E9000F0317EDF53F7105C5F4539F347D41BBBED
+:107EA000FF35D18FE757DE4CE0F8BA2169BDED52BE
+:107EB000A81739872C45A27E53DAF65D2CBFED0951
+:107EC000FC90E39F85B1BF9B6E56787FEE3A0FDE44
+:107ED0009F26E95C8F96806866031E1A75A6D97383
+:107EE0009145CDF9168A52D41DA6713DA671591639
+:107EF000EC83B04E378CE5EB0438A57DF18D31BCB9
+:107F00003E2B94D3D8A1111CF7201CA31CA18BD00D
+:107F1000FEB909D4224ED766FBDB88D3D7FE4526AF
+:107F20003BB356D21ADD50DFF91623B9DC99E015C0
+:107F3000F907FCDE19C32F31F6A5B965B864257BB6
+:107F400016F13C0EE18732E2E86759AB829389F182
+:107F5000535BE4E178B69EE4647FF1B19FBB457C5E
+:107F60006C101B7481F1B167DCE7111FBBC86DE8B1
+:107F7000F322DE2EF6FF334772285F485531278FF4
+:107F800031BBA6508A88F1DD2E8BFC35E878C451D0
+:107F9000DFAD88971147D92DDC5EEA253FE224A3A7
+:107FA000BCE6511D05941F61B3E6471C9329E1A966
+:107FB000F4C5620DF1D924E2C6171AB737E2FEC53F
+:107FC000FC514C1CFF796F39C5418B7DF1E3F8E31F
+:107FD00094D914776047F8FA19717CA6142A08E737
+:107FE000D930D86008E751F3DF01B93C2DA8505AC9
+:107FF000CD5BE6E7E32C74605DEFBF58D7FB7CF305
+:1080000020DEE7F7AA8D6223290FC226F2207EC95F
+:1080100002F747E7411878EC2FCFC49A5762CD2377
+:10802000C90C98F134B8F252D3FB8BEA8A4CF58B29
+:10803000978D33B5CF868D30BA9EBB669AA97D7E6B
+:10804000F34C537DE8C69B4CED8785E69ADE0FDF47
+:108050005AD5E7BA8F6859627AAFC8A162BC0FD20D
+:1080600058F7CBF6FC202E5D18EB6EE46961BA116F
+:10807000E27734ACFBC3D9E43F2A93B4D8F5F78751
+:1080800083B42F5FE8FAE77B843E7481FC3E0A8963
+:108090000DE3443AD713BB6CEE35A81727036C28C1
+:1080A0006FADFA4572EB0BFF2D79E3E55B682B9022
+:1080B0008EBEAFE86371BF1F20F2239B64719E7474
+:1080C0009293F4817B64F996E87BE4AFF0703972A7
+:1080D0008587FB557E02FB26EE9383135990F64F5E
+:1080E00071BE9CA1430AE6EB4D65E2FCF963AB2649
+:1080F0004FC078664781968C2205EADF88C8FD9BD1
+:108100001C5A23C60346295C8E837C9FE6198DFB8F
+:10811000CE721BD77F8236C4F360270B7A8B68DF61
+:10812000A3B866324B939614A2E9D5B3BF685F003B
+:10813000311CAC1A9E8476D0CB383406699D09B4C4
+:10814000FFDF68C8BDCA6124F7CEB87BEEB5A0F3E7
+:108150008E67E6E5D2F3E33703D701FF1CB79BED4B
+:10816000A2FEFC53959BEFF7A0FFFF780133E519C2
+:10817000547BB81D55ED5178BC3CF49774444BD7F3
+:10818000FCCF2E41A06BA5F65528A2576FBCBD822F
+:10819000F27677CD08A2FFCFF03B1BFDD4B64E643C
+:1081A0003DF707433F37BCC1FD5F377C66F6E7DE2E
+:1081B000E9E179D7778AF1AE87C20778BB1EEFF481
+:1081C000C6F2850953901FE0795882FAB7DB40F573
+:1081D00003BA9F11C8B6213CBF67FED7764B98AF54
+:1081E000ADD1F7D7B10A1BC2F5FACD8B3DD8AEA7FA
+:1081F0003FA39FC178A613F6E9E4A02D1DE8A7FBD5
+:108200001B12EDEB309E139F57CC1EBC12B70E63B2
+:10821000BCD759E0F46BB0DE33999FFA35FA672C7E
+:10822000C1240777542EFA536A0ECA3F99FC1F4B9C
+:10823000F63A48FE75559DDBFE20BCBF6570C7450C
+:10824000A85FBC59F5D92588971B372A4C83F50FB1
+:108250002504EEF344E1EDF8BC8F3CF81EF484C72E
+:108260001FC44DFE69079DF37AB3EAE94BA2F5EA14
+:108270004D9E893FF6E03E39E6FCE23D654F0D2319
+:108280007BDBA0AFDB047D2D797228E9834B3CE6D4
+:108290007B53963C9E4BE7894A2516D78EC47B3F7D
+:1082A000302F7D07D0159E23DCF729CF1FDF7924DF
+:1082B000A598CEA3B2C07684CF68BFF3E59B865362
+:1082C0005EE7B1B4F3BB1719E00BA27EC5389C2F53
+:1082D00009FE98D59A5A2CF4BBE7106F37FDFAC9FE
+:1082E000D37F40FCEC7DFAF13BB14DC9F9E18389C4
+:1082F0007DCC2FF000FB18D93F5D2CC1EF8863FFC8
+:108300003C2BF4AFEFCB3AD925E7E40A91BFCEED91
+:108310001045F667601E774BAB928878F3A2C16276
+:10832000C817D009BD78FFA2B83FDD09F6D9702182
+:108330007FDA3D1F4F69E27108935E5772A8CAA4A5
+:10834000CF55C03F94F7976F0A34E23D8DBDEA7573
+:108350006199ECE12FABDFBDF325E57DA787F37FC6
+:108360004B0197DF2DE18410B71B5831EA7BCFE03A
+:108370005CE0FDB464BE2FD8A5CE0227FC7EC6F318
+:10838000C9AA3559B0DC791C1F58C7BFD3C3DA3826
+:108390009DF6E87F872EE57F674E9C032E11E7A2AE
+:1083A00063EC49E02BBEC92698F4C7F0E1BFD13990
+:1083B00097ED29DAEFC6A33E0F7A0AF2BD4BEDB076
+:1083C00027C799DF2F517E027D8FF572FBC4B987D5
+:1083D000C7E19C9A4EF79EB97CBE51682F19ED4FAC
+:1083E00089FD66F1E13787D8619D4ECB47BC1847C0
+:1083F000A8DEBDC38B66F2658981242FC64B8EBF74
+:108400005AEAA37CABCD43D0AE6D09F3F8C408950E
+:1084100005D538F735D76E2CA64BBF6B36A652392B
+:108420000CFD09F0A836CCE7D9B9A731259EBD5D72
+:10843000FB1F7B07E1BA3D3D809F971AD15ABC10C4
+:10844000E51FC2620339F7D4A7C3A9BF4BBCD93417
+:108450003F185FC5E7209164BCEFE86961AF757EA6
+:10846000AA503BA3DF117B262A3E58CBC270F301F2
+:10847000B20F5B1D1AAEB36B0BBF0FCED5EA22B99C
+:1084800057BB6F2AB7E39279DC737B42F71FC5397C
+:1084900036FABB042E5F334B81FEB7DBF9FE380C96
+:1084A0001860873BF2DC18CFD5FA634A6A77E6F1A9
+:1084B0007BF55C6A33FB863B1AEF1EC2FB542FA789
+:1084C000ABED096119F376BA81261F23B822703209
+:1084D0001AD7807318E9F3DBEDDDEFE2F94B3A5F71
+:1084E000A7211C1C4ED63A5443BDC2E5E3F15B976D
+:1084F0004FF307A558B86A47829E0BFC764F038B53
+:10850000FC7D04CC634B88D49DC013DB739890072B
+:10851000C3564FCE8AAE83401A13F97EF63DC35739
+:10852000374D203B27A8A05D0FA52705E7C9F737E2
+:10853000BCBF604011C703FA89139DFC7D4F7B27A8
+:10854000BFB24475F376FE245FE23489F5DC676AD6
+:10855000F89DEE90C2EF5E89FEADF081911AC05297
+:10856000FDC2F344B78BE4D6074768782E31B000DC
+:10857000E9F5576FC90CEF47FAE049179D432E788C
+:108580006E33F9ABADFDAD3ED6701FE665773D2786
+:10859000699807DA65EBA6B8514DEB7B745E71EA1A
+:1085A0009E13746E4B490AD47947635EC48A32C401
+:1085B000DF58D6DC88FE3D908714A76FC9E0F2E350
+:1085C000CCD14B1E5B1185EF07BDC2BFDB1DB818B8
+:1085D000F9A655F0E73ED46FA0DC2DF4ACDDFB6FBF
+:1085E000CC8D3E87156407C81FD6C00E517EA1F101
+:1085F000BC2BA4D239B0E1AF3B6FD1A3E8AD59F0A9
+:108600007BB3182F3F29B08AF876FF9FED5E0DF3FC
+:10861000585B86A0DC6D013DACAF7CC65A0BDFF425
+:10862000E4B79CE4F771C3BA3625C13A3DFDFA9E22
+:108630004BF1EF8B00FC8CEEAB3AEE20B9B93B9BD3
+:10864000F3DF8AD73E198972EB93BD8B2E467C2DC2
+:10865000F3DA0C3A9F9480FCF42C233966F0632102
+:10866000F2A384F742713F4A21D239F29FBD7D1AAD
+:10867000F1DF6E7E2F04D039D13DD0B90FF58B429A
+:108680001FD03D7D3F94F8797BBBCCCF81831CCF3D
+:10869000A7FA24CA57D9DE3ED947FC2C036A8B902F
+:1086A0002FC307A89F16FADB75ACC4729FEB294C49
+:1086B000D21810918F7FF3703E6D29D092FC309FBD
+:1086C000444531F141D43EC9EB621F957F74D3EA32
+:1086D0000DF8F7C3DAC5BE20F4AE7D42CF65C7B84A
+:1086E000BC5F2AF6B225BF19F7ED6D30DF252F29C3
+:1086F0005CFE0B3A3920F4E043F51954C7FD428380
+:10870000751A0D25DE0754AAD7E19F2F6163CA9B16
+:108710000F6239AEA2A50C8F4C4D98D57E909F610B
+:10872000D38723FDED3A70F570CADF3DEE6098A265
+:10873000B8EB6FDD7F7C0AF351F701FEE3EC4BE809
+:108740009F6514BFA9207AEC8D6EBAA48E6BC6FB10
+:10875000410FBCA77AAA0A1B7D0D1206E0E3F57B48
+:10876000AA56E3BD803725E9C7911E97FB02C79142
+:108770008FBA5EF95B3ACAF4DD47FFEC4579BFCBAF
+:10878000AE0F473ADB9503F6401CFA3C2CE8A7A451
+:1087900097BC8ACFBCDC5EBA24C8D621FDD4EC528B
+:1087A000E8EF169CDEA5E8780EFB5D3D908E7ACE54
+:1087B0004916BC7E3CEEEFC2AE9DCFD1CEE6A3DE25
+:1087C0003292EECB30D9994C592ED33DEFAD12F900
+:1087D000272A2D7A48356B5E3518F78DD6CD769CD5
+:1087E00047D516F3F7D5A8BF8CC4B26F7BF533AF6E
+:1087F000D05F72592EEA2F403FE49FE87E4DF13F53
+:10880000C628BFA70DF37B9E96397E405E121F1AC5
+:108810007ACC569F7E1AF5CAD3824EB70B7BB47BB7
+:10882000BB44F9FDC3B6F2BCEB7127B5CD8CCF9F2D
+:10883000F2C22A851C1CA7F2F8C5B8A3B9140F1DF3
+:10884000A333F2872C68954288C74A43AF13E729C0
+:1088500060DB25BD6E2C0B35E2FD720BB74A740E42
+:1088600063D156B3FFBE7AE32B87D13C5CDC62391F
+:108870001F2FF0628D6FECC05FE2C4372E4E12FEE8
+:108880009C216C88E9BC55DBF99DB7FAAB387FFDBC
+:10889000AAE8DF68372189D34D8D986F754809891B
+:1088A000BF4FE9C6FCDB5B057DDC2AE8A39685EDBE
+:1088B00098BFBF78039F2F5B6F33DD5BBC60D7ED44
+:1088C000741EC14A4795DB78DC0D1048F19DCA4DF6
+:1088D000E6F755021F55167CD404240B5C5CDF8E32
+:1088E00085ABE57A5CDFC5DB6CF4F739AC709D6570
+:1088F000B3298FE81F0D9F759DAE33D6E95276A937
+:10890000699DCAFBBE9F2062DF98F5DF670F5F4A53
+:10891000F92E67DA72C87F60D087B59F29427F9EA3
+:10892000BA91EB99A7F794258E40BBE888EA97A007
+:108930009FE2973EF6E2798FA2BD0AC3B860576BFB
+:10894000F13A3CA7BDB32DEF5ABC8FA2E82595F6AE
+:108950008DE2978AE85E90A2978A1273298F424B24
+:10896000457C403FB4EF761DC9FB7D21CACFB6C917
+:108970002588E615478A12513FD8C9B83F427AA9DF
+:1089800024B5236A1F599CC4FD03AB32DEB907F539
+:10899000F7A9CFDAE8BCC9545BF7CB987FB0B34DE9
+:1089A000F5AF807AF54B731BF09E8AEA27253FAA24
+:1089B000D987DB97A47D07E9ACD5E67310BCDF3D12
+:1089C00080EF83DB247F3EB4AFDD7BD5F0ED98E70D
+:1089D000BDB9D81F7D2EBB2859BB1FF32A5966226B
+:1089E000D9DF532FB2D17E7A6A50E2CFE83E167DAE
+:1089F000F31494B3A79EDF69A77383DB2596011355
+:108A0000399C71F019BADFE397AF50BE42D9AE5727
+:108A1000283FA137797F3AA4B030D9DDCD742FCC6F
+:108A2000E2CD46BD83CE415408BDA966CB09AA5705
+:108A3000A1FE0FE3556D52421AFC7A70EFAF28BFCA
+:108A4000A1661BCF6F80F7247FAA307EAA45E87C01
+:108A50002EE3743057C89F458CDF33B4A8999FA389
+:108A600033EE4532E87CFEB639948716936F86F66E
+:108A700025C5219A89BE63EF1BE2F46DBD77C84A14
+:108A8000DF2D067D0F63C390BE3F99C8F3C33E79C7
+:108A90002521B110E6F3C98B0AE5DDF741E7B49F64
+:108AA0001E11FBFF99B04CFB93D1AE73CF47B48F2F
+:108AB000D41E3963477D754AEB87B40ED35BF74FFD
+:108AC000463C7F8B05AA116FDF6A4DF4219F4FEF63
+:108AD000E0726B5AAB23847EEA6FB196265CDFAE00
+:108AE0007D3F6F4A417A7982D38B21CF160A7C2E43
+:108AF00014F85CA8F2FB9EAA0AF73F88F9D0D318B5
+:108B00009737D35A84BCD964C66F97AD4525BA1937
+:108B100021B1E6ECD8FD6E11EBA0738F5D99C3E92E
+:108B2000EF4906C15E453DAC7A9B350ECEEDFA1A93
+:108B3000CB7E7A30C9F6A5EEC178C7B22ED3BBF989
+:108B40007E360DE809E3216DE18642947B067EAC1A
+:108B5000EBD2A6E526F575DEF965A1B71BF56F8B9F
+:108B60007B265A7CCDEE683BBCDCC7F5F0AAB14A47
+:108B700010D7B5C75EC93B38529323F60AD8299F50
+:108B8000250DE076CB28E8FA852C85A5A545EC9542
+:108B9000D519F74F2F4AC3FB23B8BCE81C03FD616E
+:108BA000BE80CA484ED56E7384D0CEF81F85B75AA2
+:108BB0003D008000000000001F8B08000000000046
+:108BC000000B8D576D6C53E7153EF7C31F8913FBE0
+:108BD0009A78662C34BB31F9202584DB109A40D773
+:108BE000F626A51D83141C58296AABE2B65BD90A88
+:108BF0004E5085281295B889A9D6956942DA7E54D7
+:108C0000EA56DD226D621BAB4C096A9892C8A1A19D
+:108C100025E990A0401BD0D659FC60EB9490C0345D
+:108C2000D24D95D873DE7B8D1D12B43A528EDFAFD4
+:108C3000F39EF39CE77DDED75D7DFFF29AF544DF7E
+:108C4000EDBFEECDC2C6FBA54709B63A94F069DF89
+:108C500020EA20F2449A60FB242343B0ABAF7B139D
+:108C6000254423558B4209CCBBA1EAF335B46FF1FF
+:108C7000E7E1BCEDFA52212A23EA84D5CBF2FD9D2F
+:108C80006AD6CBF33BFB25D386ED3DF99F8ACA52CA
+:108C9000A2C981E98AE760576832FE71FFF796A89A
+:108CA000D877EA928F6295D8D8322FD0FD442F9290
+:108CB000F3D9A611ED9987F6F04BEDD4800E697FBC
+:108CC00039B5C0AF878C0CD6755E540C4B47FF0985
+:108CD0000F513351F7277F1A9E1721BAF6AE64F869
+:108CE0007467FDAB8D683F6FEF9F87F9377F27195A
+:108CF00016A6BFF84DA287D0BFED4DCF95ACDFD9FA
+:108D0000EB96F89FBEB217F39247FCFA1B687553B7
+:108D10004F39616E0FED1736493FBBAE04E1AF2FFF
+:108D2000E5655CC82E581F23DA7E78A6BF24A9F912
+:108D300036F2DBF397D68EE182F1355A69E46A00A8
+:108D40005FEAA8EE96C2F1171F90B0FFE488A2F97F
+:108D50002481DBDBDF2AC4E734C058C0FD4526216F
+:108D6000CFC973257611E6FD731FC66A89C6F7C1A0
+:108D7000B90F7E5A148187BCD2B14B06DF8F713D8B
+:108D800019FFC452A23F0CBE7F2FF30109883A6C31
+:108D90003F8C798B0BE24E23A88238119791C17ECC
+:108DA0005D9F2A06DC735C35DE483EAEE36A3668BA
+:108DB00014F0637A9FD9315C8D72492745BD64698F
+:108DC00058D8DBBC39A1C4EDFA7C1BF96C35B1FE77
+:108DD000299717A44E45E388F3590D45043FBBFB83
+:108DE0009DFACA038EC5FE9B8971419BF79F35DEB4
+:108DF00066EDE0F19B9501B218B72FAD766EEF8E60
+:108E000029F406DABB3F79A9960AF6278E13F5ED09
+:108E1000F24C4599B75DE764115FD7B91BD12AB40D
+:108E2000D7D23BAB35B4D7517A3F8F7F180BFC8834
+:108E3000796DF1BEF3F37EBE0829225EE27CE1CFBC
+:108E4000A25F3A7EDD7C7B68A3C0A1C7E5D50B217C
+:108E500059CC7F554BBCC2E770F2DC7FA3489B8E98
+:108E60005FB812E47AE5EA7DE7B9BB1D3776E0F535
+:108E7000375BF5F34F83078D23AA15429EC7C68A39
+:108E8000EC76C66560DBDFF672DD2EFB88CFC3EEC5
+:108E9000C16DB5C47E138965719CC39B833F5EC65B
+:108EA0003890D423E2B2383EC435D17731AAA33FFB
+:108EB000397031CAE3C9E32B7E6161FEF2338DEB79
+:108EC000B8FFD86955F0AFF14C93E0DFB13F37956B
+:108ED0002DE2C0C908B0DFE4881A677C92234D1FD9
+:108EE000B7635EF24C5B93C4DB9C692A63FD592E29
+:108EF000513C8D7169A44AB473F9FC5C73F09B1CFE
+:108F0000021FD02F51CCE10F55CDE0CF8EDE535E46
+:108F1000CE63479F6216F228B7EE90A60A3FBF6560
+:108F2000FE804FDD69C914FC38EAD81D7DC7447E38
+:108F3000DB3D6951EFEE231E67FC8F8E253A28D664
+:108F40005934CF623C3EE62ED461ADD75E480871FD
+:108F5000B492B6A4E7D0C39AB024D68D5E4A7C9B67
+:108F6000F932DA9AA8D5EA67CFB3A84DE443928BD9
+:108F700077AF678D3D87BF2AF6873C8265B4353E63
+:108F8000C77838ECF067AD971273C5F379EE3C11F2
+:108F90001D90C18BF3ED1E8DF94F64962C80CEAEE3
+:108FA000777576D3E31ED3BB0CE3A49D2AC2F8FAEF
+:108FB0009CDEB640CFA00B71FCB1BEC5DF8C873202
+:108FC00080B4C39CA9731B29EEA145F0B36666FF6C
+:108FD00013AC970D6C55E1E76E3AF829EBE0127C83
+:108FE000A9A11AD641524A021278F3EFD31E4D11AD
+:108FF000F1DA55AC0777E697D3990FA17F3AF4EFF2
+:1090000034F48F6D77DD670D59E0313A74E9DDB0E6
+:10901000D0CF228A3101BF8277E49DD4DCBDEFF04E
+:10902000D77DFB7C7E7F06DF72F5998064A7EB67B6
+:10903000D7E786E6D421E91FF782ACD4453B5F979A
+:109040009147BDE2F0CFE74998E5C8C3D3D79A2945
+:10905000673DAD838A22BF8947259B751E7156F8EF
+:109060000A747E628124C6776F966C0B5F87EA3E36
+:1090700013F7763273D6CB7CAAE97DEE35716E2D6F
+:10908000BA40D17C1D37F89DFBF276FD72F9F2A053
+:10909000CEF981CF428F23C2F27CBE1FD7BBF7E14E
+:1090A000869699F5ABA5B38F95238E274DC9B0E76A
+:1090B000AAFB96FB4EB1DC7DDDBA2F09272261E0C9
+:1090C0003179F6C6E6A5F0375AF7F70ABE473BEF07
+:1090D000C2DF0A97DF5D81600385A02EB57A2A0B77
+:1090E0003CDE2B4DDC13669D90BF0ADE4BBC3EFB85
+:1090F000F6CB12D78304DE773B2F55AEBFAAB0E67E
+:10910000E874849633AF7EAF69CEB9F5D80B590FAA
+:10911000A81E8F9995FF5F77BB4F7CD4C075B93679
+:1091200034D2E02DA8DFF8CB38F77C8F0C7C10D53B
+:109130004B0AF925BBFC528595A48DEEFD38936F43
+:10914000E3CC37AEF7D10FD63FCD3CE9DD1491F437
+:1091500082FBF3F8F9607581DF897E45CC27355BAA
+:10916000F34469619CAF893827D28E3FA26CCDA6AB
+:10917000A585E32997B759C1DB9F2CDE19E7739CBE
+:10918000E3AD4A0E6F3BFB3A48DC476EDE692FBE0B
+:10919000202E6BD067FF06E3939EA98A70C1B9F8B1
+:1091A000A18B737346127C5C4996C27E9BE1F119D8
+:1091B0006EAB9451611FA08CE8275A48CCE3FB5D4D
+:1091C0001E37AB9921A941CCB354F072159D15F30C
+:1091D0001EA229614D82C0C3B691216C8B3FB38E14
+:1091E000E5A33E9D56984F99A81ABE0A3EB294CC6C
+:1091F00055BF7CFE2A5DCDF11393F1B8D91A9F4378
+:10920000AF0FBAE7DCE0B71AD77982EC43E87A907F
+:10921000B20A6FF2804A6B14E4F3A04AFE62C47B88
+:10922000745816E77730ABDBAC5F4699BBEE0BACFE
+:1092300043BBD974CE295F35CF34E6F3BD138755D0
+:10924000F017E2792ABDEE113866C47E0F73E0C8CC
+:10925000BB957495DBA970A5C3679A7A96F779A434
+:10926000DF27DE39B2DF1278FC34ECD433003C83E4
+:10927000F0B3EAA04463D8D758E4E49BF3BF0AAF45
+:10928000BE5023CF77EE31B4690CFD01BFB38E68B9
+:10929000B5C6784999A87C2BF0F5719D8C92883BD6
+:1092A000F8C2D4B5BDE2DDE6D30E2124A3FFA3317D
+:1092B00009EF69C934690FC7E32FC9F0FB1AEC182D
+:1092C0002F7C57FF3AFCFC5B7CDE255D13785182D6
+:1092D000747E67CCA75F697C6FC83CAFCC81EF1F01
+:1092E000C0EF4957EF2E173BBA71D8DEA8CBA8C7FD
+:1092F0009688DFE07A34FA2B9613FC6E284D08BF6F
+:1093000097A523D5C2896AAF60BF399E07C86C6133
+:109310009C25B75E7BFC8EBFE922C7F299643E07AD
+:1093200020E77EC47500E7C28FB6D5E6D4DBFABC71
+:10933000C84E61BF69392EC8F88A62F805DF6389B3
+:10934000B16658B5CDD47796F0931D7904F279A41F
+:10935000781FDCC7F4033C1041865D9A934FAA4402
+:109360005ECCBF9752546CE07144BB4A1D9EEDFA2F
+:109370006B914D95B3E33BE94B9CE4FCA665636CB4
+:1093800054DCA33B9B59EF18A7EFE47092F3386DC0
+:10939000B163A9AC2E7019619DBECF67DF93C1BACE
+:1093A000A77C7635C79FC303051224D55C9C73F850
+:1093B000685C3FE6B189FAE5EA1FCBE374A0D8C147
+:1093C000073FDF1C1C74D471E9ECFCFF0753B7A7FF
+:1093D000EBB00E00000000000000000000000000E4
+:1093E0001F8B080000000000000BFBC6C7C0F0A3E5
+:1093F0001E81C3D1F8E878022F7E7952B10C038226
+:109400005DC1C5C010CBC1C01007C42780F82410AF
+:109410006B70323024027112102F00F21702712586
+:10942000101700D5363333301C6663603805C41717
+:1094300081F8061BE9F66B483030EC9241F0396454
+:109440001918D8E4A9EBC7513C78F15A0354FE5BD4
+:109450004D54FE576D06063D4304FF9D2669E627E1
+:1094600001F526033100FBB288BA68030000000052
+:1094700000000000000000001F8B0800000000003A
+:10948000000BED7D0B7854D5B9E8DA8FD9F39EEC5B
+:109490004942184248765E1030E01042048A9E49E4
+:1094A0000A8896D2889E165BAB4340823C035A4C96
+:1094B0008F78B2212104083050AC91224E10305ADE
+:1094C00068A3A2D216DB8094A2F5F4466BABB53E3E
+:1094D00002521E3E68EAA38EF7D4C359FFBFD6CE10
+:1094E000EC3D9909D89E7BEEFDBE7BD2AF2ED65EB9
+:1094F000EF7FFDEFF5AF358AE824F23F117211FEE0
+:10950000683A4C24840C8AA784C85A8F0352A25FFD
+:109510002CB4E4C945E972F27F1B61CDEBBCDF7F5F
+:1095200021248B90EFF032FA1782FC149E31E6630F
+:10953000A424A890AE92783F5308CB6BA2402E0A89
+:10954000F0D55A6E8C53EFF08D2169847CEA64A9C2
+:109550005E458BCA69FA9633DA984F88430817B28A
+:10956000F9D45D593D1AD3AB206D14C8EC4E4F921F
+:10957000799035848CA7C9FE2122A988CF3FB19E5E
+:1095800091363510D2658FE765998492F55B41E796
+:109590000FFD9E13C215381F0F91011E0A87878D7C
+:1095A0000409A1EB3AE29F169843E7DF3A5909DA3A
+:1095B000A160FB10684C7C061C67E761DEC1F39577
+:1095C00044E3F0EE6A29A4ED9C41916CA0B9A6FC9D
+:1095D0002A07292564F3C4BF06C2743E4E3942549B
+:1095E000483DC9E7379388BC9F7BC9E5AC3B713FD9
+:1095F00064D8A3F19815615DC67CB7D8E8BC32E9A0
+:109600007E8C17C95E9ADF543E2B0DE663ACCB917E
+:10961000629C6680EB0842363638306D9A302B8D6E
+:10962000403BD23B1BF677F3C42C718310AF7F64B1
+:10963000E271470F5D6F236FD7AA1D75407D639F51
+:1096400013E1B699C32744049CF7C6D1AED9D1D251
+:10965000FEF308111F966F76D246B00E2F89EECD1D
+:10966000871E7ADAE6D2BC6F825AB641EB8F2F534F
+:1096700046CBC12E3A4F8FC713B4D3724F80B57704
+:10968000BC2144356C1FF20CA1F55DC6FE4F10E302
+:10969000F0A4FFF7916A42283DFA727A5F8371EC79
+:1096A0006FD88321FADDFDD947AFCDA5FD92934256
+:1096B000702F8C4B965BF68BEC6170B5A9F4DFB420
+:1096C000DC3579FE0C5882FBF327AB016EEB8B5631
+:1096D000B856C35E95B0FD53E9FF2E16D0FE35C5D2
+:1096E00032BECDBCBFF9809AD6BCBB78D6D70AB5FE
+:1096F000D4F8E1EEF191AE0C5A59BA05F73B55BDDD
+:10970000FA37C65E73CC346E1BF1669E71D37F5CF4
+:1097100045AE423ABF44FB4F1B82D71CB3E1BA456A
+:1097200033BF49557F2DC78F3E3CCBA7F8518AFBED
+:1097300019B86174FCFB4B8017400F7A25F231A4F5
+:1097400045BADEE6AB49AF44F7A3A958D1D65038A5
+:10975000D855A54BF0B1317B01BFE01FB4A9BDA81E
+:10976000B95B180399EF58F860CBE07F0D760D30A8
+:10977000BFC47DF8A2F0EB02F85D11879F9D54A74E
+:1097800075C17E5707103E5E3E8F7557AFD4BAE85D
+:109790007AD6657F3F749298E07815A3B3BEF9E45A
+:1097A0004489797C83BEAE14422F027C2425F85A6A
+:1097B00098C2834C52827B93AC4B16185F89C3D9F5
+:1097C0002113034E80BF87F5C00D5E9C52B5C304C4
+:1097D000677BE0F867003F399374B9C7E0F7263933
+:1097E0009DF2AF4CA2BBD3B01719F29F917CA44F4E
+:1097F0005A3E452903BE302D18A6E334DBF878EA3B
+:109800006ACBBE7EC6F7355EAE07FED9526EC3FE8A
+:109810009ABD9C6FA88D38BF7EEDFDAC7DE27AFFCE
+:10982000027C743CD45339FE340640DE3886344F13
+:109830003F02701F51D73917D6A8128483C1FFA9E0
+:109840000024508FCA87CFA09D43AB46B8DB73423C
+:10985000248C70B3CAD3947C39418EF6C32795E625
+:109860008D3E0AE0BF392AD21B4994DF3C0D0DBB67
+:109870002C39D8984057B4ABA47266B4C0F82DD137
+:109880003371FDB281075C3FB019E0D8CEE859E5ED
+:10989000E32A301FCA0F9D248A9DBB29A643DE4BB5
+:1098A000EA30FF49A8AC4B00BC91C97AE073F6904E
+:1098B00048F4FCFEE36FE6F224D53A364F4C2E070F
+:1098C00086094C0E489E3ABE1FB7A84067821E26E6
+:1098D0001781DE4884CBBF20EEF7BA867AF20E5DA0
+:1098E0008CEBE87544A3F823E7D48542B49D04B417
+:1098F000485934F194B3540E6A66FCEADB47B21A55
+:10990000FBB351B0C03A6D1EC71C320652F5064C6F
+:109910004B46DD0EF4614B9B560FAA1CC59B4A01BA
+:10992000C67724C72BE2A1443A11F35A75D2F1F855
+:109930007EF37A29F1AB0F3F8CF56A4AB5B73FDE6B
+:10994000B8CA5501488166BB613E83F96C06879BA6
+:10995000978B6360DF22D387D3FD19DC3307E59350
+:10996000F78DEBCEC3BAD696969D00152E2DA8DEA8
+:10997000308DEEA7AB840800EFF5D0D924E8E18460
+:109980005E09721DFE994DC8B7856743BA87A18FDE
+:1099900055DF1435D9E027E280FA8B70D1DEBF7D28
+:1099A0004AFE4C4CF483727CC5E5E94BB7B0F174C8
+:1099B000FA3FA03B7F823C4D0B99FA25001FEB3804
+:1099C000EB006F10BECBFF5BC653C93687067A47E4
+:1099D00091A846E9D86944F5535E4C5C536402F2A1
+:1099E00044CDE9D5617B2FB52F6B09998E7C94D23C
+:1099F000AD19CF77723E10A869CA6FA6FD7E52EEF0
+:109A000009021F184CD966467AFFF56C4CD0B33763
+:109A100096EE46FED848F1A800F4FD5211F5A1F5E6
+:109A2000454FA86679F57383DFF4C30FA2C915C843
+:109A30003A08A1F0918AC49073CC3F8E1F897AD2E4
+:109A4000E5E287FB16EB7E7CD1FDFA759FFE7D7902
+:109A5000F8F18F8E67EC6B2ABE45F715F5EF166DA2
+:109A6000D680FA4BFF7DDD86FBEA2A22A1647CB812
+:109A70005B10ACF2C99C9AE507B9D3B25FB6C2AF2E
+:109A800007760F000F5B49829CE4FD3AEB25ED342D
+:109A9000E8B1B28AF2C8B01FD66BDB74D0E73FC919
+:109AA000214CDF8B2CEF12400F2A22A807410722FE
+:109AB000CD3BB5507483C0F01FF6C5D06F6C541DFC
+:109AC00033C357525D963C99AD0BE6F93BEB159CC1
+:109AD0008703C603BAF4D00E69BF520EE972A2FE24
+:109AE000C9E60F43313BFE9ECBC203035F01AC0CC2
+:109AF0005FADED9A036524D9FEF51BEF26EB7C5391
+:109B0000F2A5C4761E593B63D24752B793C9199345
+:109B10005E33B4CF7FA11BFADC2181EA858D81AF52
+:109B2000EB386FF80F95AF2D905279260DA9226171
+:109B30000DE4A4C6E8444B67F2B743B0D8E1C6F7DA
+:109B4000D4F360E3C56EA7B8087C4DD62CFA7262D8
+:109B5000DAD810F8924C91D25DFFF024791C55624E
+:109B600057876657D3FAEB1B3A26C177A3DE54D149
+:109B7000B0BFA9D834E9C732A1F51CF8955C1C0721
+:109B80001F55A299E4BB83746239FDCAF78FE03E8A
+:109B9000A05E45BBAC1335EC572187B01E7404F5AD
+:109BA00028179F2497B0EE20BFD1160AE1BCE488A5
+:109BB0006305A5BB8D4E9ED778DECFF32ACFE7F3A2
+:109BC0003C951390772B344F53A72DA262DEC5F33B
+:109BD000F93C9FCEF37E9E2FE079611BE6372AACDD
+:109BE000BF0D7294F5EFE2798DE7D3795EE5F90266
+:109BF0009E27BBD9F8769677D9A2AC7F37CFE7F30B
+:109C00007C06CFFB79BE90E785DD984FB57FAEA28D
+:109C10000E06A73EBED019CFA3F0E070EDCB77259E
+:109C2000E419BE64080C0F635F35F02688FC917858
+:109C30007291DE86F0368DF3CAD877EE47317D3FDC
+:109C4000A15139F749584439996ABEDFE7FC743BA2
+:109C5000E8B934DDDAA062BAA521807AEFA6068DD4
+:109C6000FB554AF0FBFA8620E6D7354CC0746D43AD
+:109C700008BF37364CC7FC630DD598EF68988DE95F
+:109C8000BE8630A67B1A1660BABBA10ED328D57744
+:109C900021DDD5A063BAB3A105D31D0D114CDBE6C0
+:109CA000953D5F04F35F40E73F007F183CDBEA0728
+:109CB00019546DE58BE953D22DE5EAE46CABDFA4D2
+:109CC000BCC092F7948EB2E45D456596FE1C399354
+:109CD0002CE54A6695252F7BAEB7E4AFE89865C9B9
+:109CE0008F8C7ED3D2DF88B61A4B797164A1A5BC64
+:109CF000B06585259FAFFF8BA57E5EFD1A4B799BD6
+:109D000033FCAC48F9D5B0BA0D967A43176CB3CA98
+:109D1000AB199997C5B7C8C77A96D99F91C8EFA5CF
+:109D20005C120AA1DC62F2A511F016FC5EC3487455
+:109D3000AF00FEAB6B4F80DD612F6272A79F7D99F4
+:109D4000D09FE2D9F79A4EC7A9F49D08F498E88C01
+:109D5000044CED28DF3F2532BB79C3BDCCAE6EBDD0
+:109D600037B97D8D9C9DAEA3F5F3E4FEDB1E51E279
+:109D70007A906EB1535AEF15B0FE3FDABF519ED8BC
+:109D80006F7C3C8A7315663D246AF845899E15B739
+:109D9000776D3DFEB960F71876AEE460DF2B4B823D
+:109DA000279B28BCD7AA04FD866B3D5504F48A4F37
+:109DB000544637644F2EDAE346FDFEF333E915C807
+:109DC0007F5C563FAD6716FA3DD7660EAC972931DA
+:109DD00009FD77524C205D54EE2872F5F47C4ABFA1
+:109DE000CA2B52703541F993D4BE27641BC2414A35
+:109DF000D06F9AE625F0BD29C370DD36BE8EC6CC85
+:109E00002AFCDEA40E3C2F3BCC0BE6C3E7658BB9E6
+:109E10003195624E9CEFC45806E627C4FC985E1547
+:109E20001B8A69456C08A6E363859896C7F2311DC5
+:109E300017BB02DB95C546623A36360EBF07636331
+:109E400031BD32F625FC3E263611D3D1B12FE3F7D2
+:109E5000D25825A657C4BE82DF47C5AEC37464EC92
+:109E600046FC5E12BB01D311B16F613A3C7633A65A
+:109E7000C5B1B99816C5E6605A185B84ED0A6277D9
+:109E8000609A1FBB13BF6BB1E598E6C5EEC13437CE
+:109E9000F65D4C87C51A31CD89ADC674686C23B6A2
+:109EA000CB8EADC77448EC7BF83D10DB8A6956EC6D
+:109EB000014CFDB187B15C8DB5639A16FB217EF72D
+:109EC000C51EC5D41B7B12BF7B628F63EA8EFD0C5F
+:109ED000BFBB623FC1D4197B0EBF3B624730BDD4CC
+:109EE0003E2939563E2E65BA2CF909A7D32DF851D3
+:109EF000F186958F97BF5260292F7BD1CAC783C740
+:109F0000CA2CF931872759EA971EACB2E447EDB75E
+:109F1000F2F1923D563E3E7CA7958F176DB7F2F158
+:109F200082562B1FD79AAC7C3C7795958FE7DC65E2
+:109F3000E5E3D98BADFC3B30CFCABFB3C80EABFD58
+:109F40003D65B755AE4D7ECCD29FA7FC09ABBDC0D9
+:109F5000F98CABF4A796768EA2A349ED9A447F398B
+:109F60008044A6F47D377105CDE72A469ACEF941A3
+:109F700006D01D4D3339DD0D02BAA369FA5716E339
+:109F800039D3A75F6DF95513ED2C7D28617E017DD6
+:109F90005B15F8BD9A87F03CFD22D07ACDC308FA54
+:109FA0000988FE6E2596E7B3FC0FA433953AF3DFDC
+:109FB000B2727281953B59FEB1C67F5B0DE5E969CE
+:109FC000A1EC20ED678F2D391F7F4262E76D17C42A
+:109FD00050BB44D7FBE7CA9E95E047B33BC27B2505
+:109FE000FA7DB1239C07AEE90F6CE14764E08B2456
+:109FF000B40FBEA791D02312F26BAB5FB415146EF1
+:10A00000DACFC762F57E28CF98D9817691B1EE6616
+:10A01000EFC0F3894A4C2E35FB09DA8DFAA30ACA40
+:10A0200053FC33E4059583F7BB7D2128DFF5A8B207
+:10A03000DBCECB2D72A33E0BE586ADA37939B824D8
+:10A04000EDB09F5232BF680FE6D340E32F04FBBE52
+:10A050003757A6E9527B5733C8F5BFFABBDF122446
+:10A0600084C7AF003E2BAF0F63FD35EE9913603D03
+:10A07000141E27E03B85C7F3D2A0D4F02070B24075
+:10A08000E71F30B068BF60F13F9E13C2BF954C7EA2
+:10A09000CC403888703B20A9080F037EF4EFAE74E3
+:10A0A000C31FC3DAFD11C74DE84FE6E762BF95F85D
+:10A0B000F85C1E1A789C21927032F81BE73EA423AC
+:10A0C000F70BF9B39D8A98741C9B5C8DE7A9FDF88A
+:10A0D0005E66825D9F1986B35E2A3FA9BC4C32AF93
+:10A0E000690AF74FC97997757E15E5FA3DD99FFB47
+:10A0F00085CEBBC0D083FA438D7D3A968BF951BC97
+:10A10000FD50D0EB283E3DF7A6FDE812CA07765178
+:10A110009E614FE20FD8D521E2F9FA503F45385AF7
+:10A120005ECFF5006A13A13E688C2B2FB6FA8F2202
+:10A13000360EC7C356380EA588FD536A72134F1EDC
+:10A140009B1F3FB734FA69EF9BBF751EBBF52031EB
+:10A15000DBDDF9ABA322E83572079DC798FEE31358
+:10A160007EBE60D091ECE17E13350FFB35C64D1CF1
+:10A17000874833F03C29157CFB8DF305CFEB2AE4AF
+:10A18000E4E79D747F104E4529F43CE3BCCEC83F04
+:10A19000F7662D9E7F37476A50BF6B0EF073F6BF90
+:10A1A000D15EA11F921C4FF6727C7A889F8BECDDEA
+:10A1B0005EE5C0769979967D2ABEEF265798E967C5
+:10A1C000E990EE6B63F5863F308F7FAFC1EF0FAD47
+:10A1D00062DFF3EEFDD8C9BE7FE88734AAB3EFDAB9
+:10A1E0006A99D717B13EA9A77FA673A0E16AB508FF
+:10A1F000FAEEF0ED2404DFF2D45E01FCC89A4A4482
+:10A20000DD04D7ECED472BAFA3E5D991EA59D7C1CF
+:10A21000797898048B35F8FEF2EA91B88FC401FB87
+:10A22000BD83AF3B2712DE3012EACDA6F548BCBC99
+:10A230008D8F3B2C12DE761DF8EF4A583F46F9F71A
+:10A24000797B97511EB2B68FF0F2DC55A7BA46D093
+:10A2500076B991DE97AE857A1DD67A9B79BD51503D
+:10A260000EF3085AC769E5F390F4DD04D0438A90F1
+:10A27000F4E9D08F6AED678381BF505E8EFFC6F22E
+:10A28000870DBE90C0478C762D29F6DFE0273BC1B5
+:10A290004F3002FD5598E6B426F7BF96717E65E013
+:10A2A000572A3C270B448B7D47C22E6B7EB649FF55
+:10A2B000837C28DB5A3EA1C05A1E1C65CD97945959
+:10A2C000F3DA244BFED33E3F4BD409F460F8590C2B
+:10A2D000DFCC0E95D149DC8FD7ED34DB2539BCDEE0
+:10A2E0008375CC1FD3E8E1F4C4FD322E4E97CD2503
+:10A2F000CC6E31D6FD24E75711EEF7D8D5D0C6FC89
+:10A300003063438E7CBA9F2DBF938203F9A11FE770
+:10A31000FBF1634E8F07B8FFE6877C5F1EE5FE9B6F
+:10A3200047C07F03F40AFE1B3BEC3FF3DFB473FF2F
+:10A33000CD43E0BFC17DADE67E98D958DE06FE9BD9
+:10A3400011E0275A80E916EEBFD9C4FD371BC17F43
+:10A350003302FC422D980EB231BB7CEBD45036F860
+:10A36000CBF64C4D6E170FB231BCC8074586A6B967
+:10A3700024F46517E02F456C3897293F167ACE4DA7
+:10A38000F323A20CAEE50743CF4179711BCB17F243
+:10A3900071409E807CA1FF60713639541B32E1EF21
+:10A3A000B817A3640EDDB7B7657E0EA051D5232B79
+:10A3B000EE2F8572D8A73785508F3C1EFA25CC8F9B
+:10A3C0001F0E0B401E83EFEAD5155A4F5DDC1D8230
+:10A3D00036BE96CE2EB0B335BD0BDB6DAD0CA29F55
+:10A3E000CDD8273ABA051FE8DC902F0EE3FB4F26A5
+:10A3F0005BF12137B60BF5E1E6BA596988771A198E
+:10A40000D05E2FD969D517866FB7DA49CD77CD1AC7
+:10A41000D0BF9CE82F53275BFD65CD2503B7F7958B
+:10A420005BC7F79426B4F70CDCDE199B39A03D78A6
+:10A43000855893611B14CF17C6AEC1FA89FA9F0CD9
+:10A44000F16F54AF93A72821380796A7A8187A254B
+:10A450004FD1781AE4DF433C5FCDF22A8B93A0FA08
+:10A46000623E8C43F727E1FC3B44E07C7AEB48C238
+:10A47000ED91DA35A11C9AFF6782F6C449F9CE2A1C
+:10A480009DE677CC7088D295806F2CDE41E1FB95FC
+:10A49000A144D723DD6E15C96E9ADF131998EFF525
+:10A4A0008B83F084D07F3374B15A260D40F7DB17CD
+:10A4B0008BD3A349FABD86D315394612F5EA6B6CE6
+:10A4C000F4FBDAC5B354E0FFF24D41B41F88C6E691
+:10A4D0006FF0B98CF481F76F57C27C7353F87556DF
+:10A4E000DB38BD9530FE68E07FC64A86E7A9FA5F93
+:10A4F000C7F959AC53B0F87F06DD545D69CB447B96
+:10A5000028E8013EFAB9C4FC688759FC9A414F8D8E
+:10A51000252F23FF36C6CFCEE902B38D341F99C84D
+:10A52000E22A287CD15E3C42F97829F27B02F55D73
+:10A530000B7A2A991F3D8AF10FAEBAA00E79C9C3D2
+:10A54000F005EC515E1FE7B3E1AE5921D8A7C61C58
+:10A5500012E420C6751A78D018103134E29312A68E
+:10A56000F7CA2AE51330FF9132CE9FEA59172F1A06
+:10A57000F68B04E789BACEEC37167765C4E30D6D28
+:10A580001B83F8DFEC5D89E785FA58A60748A49B92
+:10A5900088F9381F5D2C077FBF1A04596FCBD4058B
+:10A5A00033BE7D4D08DF0BFB1EC7AF4E8C4731E03D
+:10A5B0009708FF6F71BE9A4792DB1F83B97D93A105
+:10A5C000745E077CB7E5518AE749E266FCBCDE0FA2
+:10A5D0003A66A5012919746B941F90341CC7C80FE3
+:10A5E0008D292CFEAFCB6AA7FCFFAEEF1FB459E359
+:10A5F000F3FE47DFFF1F7DFFFF117D9FCBC7A96BD8
+:10A6000060236C1E962F6F9EBA46C7F559ED7649AA
+:10A610000E5AFC1FBD40FF26392F7BAC7AC9E5F3EB
+:10A620000D19F527121C66E1BF19D903CB19C3CF49
+:10A63000F1E930439F0F215D90A21262D6D79A8034
+:10A64000CF5338EEA470E47187384E365F97ABA7CE
+:10A650005A17317EC2CAB7772E38EA1C81FC5FC612
+:10A66000769E406708E4AD43EB46FE6BF069CA9FF7
+:10A67000C72A8380CF5720FF739544307E6D2DD736
+:10A680004313E10AFC305006E325F021A2A53BA0CC
+:10A69000FCBB0C0764F0E3819FB27E603FCBE5C654
+:10A6A0007D187118B9F40FF8D04699CD8F1CB2C639
+:10A6B000B1537C7458E275CF3D8CF2D4E8C7D077A3
+:10A6C00012DB35A9556A32BEF8A610FEBA32009EDA
+:10A6D00024FAB548021FA71C54007D6EE88CE9E8F7
+:10A6E000AFEAF36FC956BE2E078CB898FF5EFE5EC8
+:10A6F000A7FC9DF1EB5FD0FFB78B9FEF27D2716274
+:10A700003FA24EC49E24E3E7EB62C2B9B355EF17F4
+:10A71000648DDD13AAB39ED3C89EECE4E7093CCE5A
+:10A72000B366421FFE7EE38F147FEF3861633C8C7B
+:10A73000CB25C3BF7B07C47BD2FDA981F84F2ABFBD
+:10A74000E7916A1F147E40448C2BFB80BCEC1B6796
+:10A75000DAA77D0AF3E79316DB29B86F64C435DE08
+:10A760001E6179633EB56DD6FC7C322B0BCE35E68F
+:10A770006FB7118863BC83C8A77A8CF9533DE7FB98
+:10A780000A8BD3AE2575CDC0CFD672FF7D8D4A64BE
+:10A7900088435CF2CC8315606F1E50981EF52E85A1
+:10A7A000BF668A575BE8892A703EF1CEC1715FFFB0
+:10A7B0001281F6D1E66C8847A47A2DD8BD89709FA6
+:10A7C000DB629DDFA5E69F385FE37E52AA79C81D54
+:10A7D0004228991DF133C51A3777A97B536F8391AE
+:10A7E0008CE720D67B53976A775AD148B2FB5697AD
+:10A7F0006A77FEEF1CEF428AF196387A14E003CBB9
+:10A80000E4F074A1201EF7A5D8AA43432928E44305
+:10A8100063BBC0176EAAD77299F54E80017219F505
+:10A82000A68B03F47781D3F1AFF63FAC007D7EF0C9
+:10A83000D8C99970EEB3E8671271C0BAF67B4917B0
+:10A84000B34F1490630B0F4AE88F237257C58DA640
+:10A85000385A8CB8A5EB5FF4632FC6692C7CC21EF6
+:10A860009D41DB2F7CFA9D3184C2E1C29ADEE34335
+:10A87000C1CE784C6071897ACF981BE9F78532B9DF
+:10A88000AD3A091FF4D8199EBFFF13F76CC023A17E
+:10A89000E3C8ADD86FE7376C76D3B9A064B7E1B839
+:10A8A000B45E889D6709D16281CDCF7CDFC2880705
+:10A8B0007DFF5181CDEF902DEA84F975B42B615A5B
+:10A8C0006F59C75F106FBFFCE3033E80C3B2439272
+:10A8D00085BF2CEB90BAEC63303D69C7FB34218F08
+:10A8E00040F9C8526431343DB804E3C797766EFC32
+:10A8F0008BE483F656FAA1700976015C5F9582338A
+:10A9000020FFE4233EB01BDFEDDEEB03B8D27EE791
+:10A910002814AFAEF9D8446784F51F4BEFDF1FD57D
+:10A920007414C0AF659DEBD97809F4F92EFC634827
+:10A930007FB930CE6E950B9F90172BD05EEFC84835
+:10A940001A6FDF271738BD2E3AF0C92E9D8EFBFEF9
+:10A9500013EFEDD2E9FC17FFC747BBEE01BDECE7F3
+:10A960004E15F8CCB2C77EE72326B8CFB433BFC1AB
+:10A9700085471FD9B783D2CB853FD8D1AEBDF0EC88
+:10A98000D95C8DAEFBC2E39F6569B4FE5DCF4E1D01
+:10A990000C70B8EBA92F0F1EC84F00F81AB59BF723
+:10A9A000358AFD6B870416DC7F98A709FBF3DCC1B1
+:10A9B000E772619E1FBC66C7FB8CCBE8B7FA32D842
+:10A9C000AF25C8F721BF8AC279E9FE757F91C624F9
+:10A9D00083B73E54C4C3454A3601D8EF1BBF7675D2
+:10A9E00039A4B6A006FD915EE4DB89ED96BD42F781
+:10A9F000F5CAD4FBF809F99B02F05FB67F3D1B371F
+:10AA0000611F3F807F4CECBF8F8BFBEDE3E287D073
+:10AA1000E638989134FECAD8C7254FFDF3807A8076
+:10AA2000C10F2E05DF053C8E70A23DB4CA0E74F531
+:10AA3000845B0FB0FD8DCEA065170E7C924B287EF7
+:10AA40009CB3F5DE0A7CB2F759BBBA9B7E5FF8EC8B
+:10AA5000AB4867179E7A49D1904F128F40F5840B0F
+:10AA6000A4EFAF1BF486A5FCCC79D91E6F97DD1738
+:10AA7000DFA7A5D11BA66B3EFC7E12BF4719FE2F98
+:10AA80008D1EB94948B26F4FDB0B183F8F0E42B88D
+:10AA90002C21DD8A5A6ADD4F6102ECE3C9698077B7
+:10AAA000A9F6D158BF0AEBBFCAB49F7B18DD26D6E2
+:10AAB0005F4AE913FC887DFB1A155E2549E8F442DC
+:10AAC000BB5D8678E10BB64BDC03FE82FA5FA73DE7
+:10AAD000857DCFE170293ABFD4FABE28FC76817318
+:10AAE0007B507F38BEFFB7E4FCFF45CE379692F02F
+:10AAF000F46CA9BFFC9248481F9A1F9F6F73A784EC
+:10AB00007CFDFD0E290A4D13F9C4D2147EA7D7EDA2
+:10AB10004C1F597AE8C818E067EF1FFD09C74B863C
+:10AB2000F74BF79F54742E0FA2667990C23F799A23
+:10AB3000CF7BD9E1E4FD2DDBFF97A4FDBD2B87BEC4
+:10AB400001F37FB7DB4674DAC5BB9D52523FEC6F11
+:10AB5000EC364B5C61B3B7E2B534DA4EF2B9341877
+:10AB6000BA714DE8551DF492976D78DE41E4E039F5
+:10AB70003BF813BD2E6D038557A36F3EFA2B8DFE58
+:10AB80009A12E02407AA75B04BE5CCEA72A62347D7
+:10AB90002D76B14D152DF3A6723607E4D05B63CF49
+:10ABA000DA609D6F27E8836FCBA47930EDEF6D5DA0
+:10ABB00008AED692E1B7B5FFF02A896866F967EF6B
+:10ABC0007D0BE6437EE12410A722FDDCA9033F595B
+:10ABD000B6CB1985B880E79EFA741FC0EDC24376E4
+:10ABE0001E27C0E2CE6B55D6C7D9A73EDDF5EFB420
+:10ABF000FC2C34A6E3D7EEA2F5410FDFEFC6E0FF51
+:10AC00003F3F91368650FE5CFB8B7B66027FA90539
+:10AC10009E4AEBD7FE7830EA756706B1FC9903C30C
+:10AC2000A2B02F8B9F7C7629C891453F7213701973
+:10AC30003CF7D4ABB742FEC22FBC182779E11767A7
+:10AC4000AF013AA0FAB36696E37798DF2BA0FD2E0A
+:10AC5000823C2B172E9AE26F16414AF9C6A243692D
+:10AC6000780FC8540FDB2DB3F7AE0CA23F59CF16A7
+:10AC7000D1C6E9CA063A5CD4611D6FA483F949972D
+:10AC800029BDF359FD4836A3D76E6C57E1E078CA69
+:10AC9000CB13DB1BF5CB1D05967A46FBA5765297A9
+:10ACA0000CFF2B79BF8B3A3E1F61ED8FE16BFF717B
+:10ACB000D8F7EF08EC9E0A79DC89E76D8B95AEE159
+:10ACC000E9945E9F56C802A0DBC5BEAEE17E3ADEC7
+:10ACD000CF389F5CECA279FA3D9BCF03EA439E38C4
+:10ACE0007A7E04FBBBE41927017C5FF20B2F9ECF19
+:10ACF0002C79FAD3333FA0DFDF7FCA8D7E9325BF47
+:10AD0000B81BF77B89BDEB56F0FBF53E6E477FF332
+:10AD1000FB8F3F9F0B7AC8FBB6AEDCF401ECF3254A
+:10AD20009D76EE8CB0AE83DA052575743EFA561624
+:10AD3000C7564F5CC1D5109F028E03C0E3379C2CD1
+:10AD4000DE8A9FEFAEE0FEA00FE7696938FF52E6AA
+:10AD5000DF5AC1FD072BBEAA0DF69BE60171A66462
+:10AD60001C21772B752380CF4AB1AF108DE6E558B3
+:10AD700021A6463D490DE2F98394C9CECF6D994194
+:10AD8000525B0AED585C12F15CDF4767FF8B6EF196
+:10AD90008A07B4C1D0DF4207D3A7DB9CA1BB1D68E3
+:10ADA000CF78F07E29AE933204FD29B6AE4F05B6BA
+:10ADB000AEC4F97E6AD3EDC0CFE3E7DEEC9CA55EBE
+:10ADC000D65E85F34C7282F3A57EEB6774F6A19A8A
+:10ADD0008E7466AC6363838AFC647D4300D3750D17
+:10ADE0002544C3FB0141CC4B1C1EF6529D4870DF2D
+:10ADF000566373B57BAA43707E017DE2B986278CCA
+:10AE0000F8650FD4A1EDEFF010B44F258F4E6A3DD9
+:10AE1000E80F4338C1B90CC049E179B96D06C29554
+:10AE2000B6C7EF2B9DE15D001747CE280B9F52322E
+:10AE3000CB2CF97E7033F0E2C07F37FC08C26B7D0B
+:10AE4000830353B85F017083FB1590FFBF00BFE31E
+:10AE50008EF1ECBE8366A21FB8EFA059E82905FC6D
+:10AE60001EA0F0CB8CD355221CEA797C9B414FA9C4
+:10AE7000E817EEA7C0E5836D0D6D981ADFD353C8B0
+:10AE8000F5E14E81C7058457DBB87F1CF7215327B6
+:10AE900039267F1209E8782F0AEF5743B987F9114D
+:10AEA0008DFD9554F98C95FF69AFC27AEE7EC1266F
+:10AEB00002BF92EA1F26EF6498E87846B5534338FC
+:10AEC00007D17FDBC8E5EBDABEFDB4D2C7C6060DFD
+:10AED000D34D9C4EB6703AD90AFB0EFEB9A0887BC2
+:10AEE000DA3A9DA0FCBC8FE6997DDF45CC7E6D7F74
+:10AEF000B0B3CB46F71F7992866917F2AFD7ECD182
+:10AF000062DACE5D4A42802FFED7BE1BC5B592CE17
+:10AF100000F843FD1C7EE47081FF66F69E828DC9B9
+:10AF20002922B1346203FB2911BE8DC1A30EB0BB2F
+:10AF300053CD272BA8DB73E978596FD8917F67DE53
+:10AF4000D2F95A0D5D87A7D58DF6645690E1A327F7
+:10AF500018166A4DFB979542EFDBE7BC2ED349E903
+:10AF60007810C4F3D2745B5BA113E0BBD1D6190097
+:10AF70003EB8D1CFE48C369B8E7695A93DE78FBE47
+:10AF8000722BFD1BFC589D5C66C16383DFA64FB12D
+:10AF9000E2BBC16FCF3B983ED7E6AC1EEE8478DEB5
+:10AFA000D84EA4C744FC6FB429BA40F59446D025C6
+:10AFB00041BF3B29B0B894FE7C00E3563EECC9DFAC
+:10AFC0000DEF0EACE1F1D43AA517943BDCFF699C80
+:10AFD000CB1F20D52DF00E4C0BC52302EFD550FC16
+:10AFE000017AD84CF107D208C51F4627133035F037
+:10AFF0007326384FCCE7BF45C745769F4304994336
+:10B00000646A077AC0CF7464A203F442D9C6E259D5
+:10B010007ABD6227C4B3ACF5CC7284C0AFE32FC74E
+:10B020007DFFABB7266FA07315785104F046F50489
+:10B03000C9A9D2F8BD5F492D23604F1EF074E3F912
+:10B04000DED54ED132AF3667F846A7C9CF3F1A4694
+:10B05000E7FBF64FB8FEE4F7876F73723F658E4EDD
+:10B060008A4CF46DC499124D2725263A5F533C8DC6
+:10B07000C039687FFA4EC1C7F6FED7F0B1C6BC280A
+:10B08000EE9B2D916F6452FEEEC154175538DF3B95
+:10B09000D4F42D3FE2D95D000FE2D9DDA7BFFC5308
+:10B0A00041FF7926F2ADB83CD2D05F45E5D1FD1322
+:10B0B000800FA6904747DE1CF1358596BFF3BC2470
+:10B0C00098FD750B62EB511ED4C626128DCEB7A625
+:10B0D000ED7B98CE6F6B47BC3F175DEBC3389A167C
+:10B0E00066CF9D8BDAA2523EE2ED4509FCFA84F56B
+:10B0F0007F6E6723D623E07D318D7B6E276B4FCA31
+:10B1000035D4A73FE46BACD9620FC139CDB936DA7B
+:10B110006E0078D6803194443FC5F704E0EE00A974
+:10B120001B017CCEA0F7BB15CA97000E6FD993FA0E
+:10B13000D9573AA7EE00BA5EE90CB533B8A75FD687
+:10B14000BB16EF8854EF4578877D3758FCACCC8F21
+:10B15000F90ED78B892345B98FB75793972F697D00
+:10B16000EFF8BD34D75C1AAE2626FB5A22CCBE5E61
+:10B170007AA892BF2FC2E693043F993EDB6A473E0E
+:10B18000348FFB830C7C8DE34BD8C7EF975AF0E9E3
+:10B190008ED856DC6F61E3E8FB2752F87D44F10856
+:10B1A000FC72C2C6AB07031DADDEF0A52DB7D0FE05
+:10B1B0003F7E51C2EF0B624EAC7FFEDEE0FDB780FA
+:10B1C000BEFE6F36027CE4E31353F13CF6BCCDEADD
+:10B1D0004758E462F2FA1CA7E3F9B18D16FD787EB8
+:10B1E000CB5C05FC8FF3639BF1FB7C3894C17B2027
+:10B1F0007F3E5629C3790DC1F3D173CEF7A7AC01B9
+:10B20000381C2E433F56ED267BD27B29E79C9AE5DE
+:10B21000DCB9B6A715FB25543FCACCE2FD99F84727
+:10B220006D0C2EB1C0FEE804EE2DCCE77CA46F7E41
+:10B230003B6D163E72DE99DC4F12E37AC9FCD8975B
+:10B24000908EFAAFEF1A465FC6B83D8CEEE2EBB9CE
+:10B250007F62B2F5C4D73119EB9FF7271F3F8FC329
+:10B26000F94CC30212A27CA8C64EEB7960FC3B9B52
+:10B2700027809DBDD39F2E98D655DBB688844CEB96
+:10B28000AADD3947A931F51BDF07E72FCDFB90B7C2
+:10B29000419EBAC60372BBDAEDA270AED978F598BA
+:10B2A00030DAD98C9FBC630BE6025F3DDB766752D8
+:10B2B000FACE736916B950DBC6F787EABDE5A6FD7D
+:10B2C00031F625B1FD99376BFF7A2FF8011E604AE0
+:10B2D0004D2A78F5DBB7FCE4709BE862787986CA82
+:10B2E000D930C24D7BFA35C0EB4D6E8CF74C0DBF9B
+:10B2F0002B487820F8A5D05FA9BE53E61A0FE312B9
+:10B3000084436D1BC3834BC12D3E2EC783CAE4EB20
+:10B31000A9EDC3837AA253823DA55C0A0FEE21BA40
+:10B32000638075F4E1C1680B1ED4BA8AA7023D9E02
+:10B33000033D6544FFFD3FA5E8BE49700EB441C220
+:10B3400073A6532E3DEB9B2C3F16F8F3295F64E662
+:10B35000A4F278FE8EBDC5BE39A671CFB6DCE94B2E
+:10B36000E667AD4D853F453A29ADF83F873FEFA4ED
+:10B37000B8C7B5D259B908F6934492FB738DD4E09F
+:10B38000DF529AA7CFEE04797ACA53F0D7282D3D21
+:10B39000E40CAF047ABA5BD4C6CC11E2F6673FFD89
+:10B3A000B361FAD5A78BC15F587DF5691BEA43D815
+:10B3B0001F01BD329FC745A07F6308CA83C4F3D273
+:10B3C0001FB8F2939E8FAE6DA81B07FD12874E54D7
+:10B3D000739C1C617AD4FF86F1F3E3EB516C613509
+:10B3E00008F6A540AA01CF6D72B805EE03DB0299FD
+:10B3F0006375135C1F7031FF97F3D8B1967CDADE6A
+:10B40000F9A7175582F7CC74F4AF3972E40FCDFE6B
+:10B41000695B268B5F2445A6EF0510874CF3163B2E
+:10B420009FCE77003BF567028383EEB5F37B75BA59
+:10B430000472EF662731FE50FFFE8311072237B1F9
+:10B4400072BF51DCC4CAB9FF72590DF34F26EEEB3F
+:10B45000CD87D775833E73F3E12173C18F75B367D1
+:10B46000C49FE07CE167E0C3077CF733B99CD8EE6A
+:10B4700030A7D36FB58BBA8DEECB315BEF5137CCA4
+:10B48000F73BEC1DC76FFEEE98CD4DD3D75F396506
+:10B4900083773B6E83001DBAAE39445398121CC5A6
+:10B4A000F67349A797E53B07CDF29AFBA3A62AF4CA
+:10B4B000B79C9DF37EF377AF4C05F14FFB5B0BE937
+:10B4C0006D2F1205FA9F73506B66D7F8787F8769E6
+:10B4D0007F62BCBF381C1566E7C80E844B1C4E0E3D
+:10B4E000849B012778E606CBE370467DC380731FFB
+:10B4F000DCD2665F4FC6A4A6979B3DC3FF44C6C47B
+:10B50000E79508E78FA188D2DB7157E88F403707AE
+:10B510005CA137205DECE8CD950BF01E630FE4973E
+:10B520004AE1BC2C8A671F0C0B8F1804715CDDC9C3
+:10B53000CF5713E9F42DA01788FFE67198B7F2F5FD
+:10B540003DF7DDB35E8CB37CEAD55C4897483D9B04
+:10B55000BE01F4F66B09F5EF0F0F8E18302EED2DAE
+:10B56000EEEFF8D425F2F303B6BEDBB81E77DB416D
+:10B570007714DEE3BCAD5EB2E8BFB7D5B3380E22B8
+:10B58000778FB9C9A24736A5EC07ECCEC47E8CF5FF
+:10B590001DCDCDBE02ECC387C62B1AF81F8EBCF89A
+:10B5A000E11F6A69DE35CC81E7B29BFC1C7F2B452D
+:10B5B000DCF787FC21F768F03B6D480FEA749D1BB0
+:10B5C0007E493A450A9FA3235746ABE8789BAF16BE
+:10B5D000D167B525F670A40ADA95B2778F54AE8F8D
+:10B5E0006EE93ED506F878F6353BFAFBD3BD12CEB0
+:10B5F0006383AD3A17F4F73FB52B49DFD97378650C
+:10B60000ACD72EF460BCDB5C127100DF38D83D6B28
+:10B6100030CCC717242AA0FFD99D92C8F464C3CFA9
+:10B62000D125333FBB2EB37C88A7AAD3FCDEDDFA3D
+:10B63000E953309E625EEB4B184FEC2B4F7ECF6987
+:10B64000829BDDD7F576A7635CB4778A886F24790F
+:10B6500083BD02B4CBEBAE52B07D4418B07DDE2A80
+:10B66000F53A802BB407FE9F7799ED836E05E1B024
+:10B6700095DBC9EDB660F314DA4FFB26BF00FB6122
+:10B68000D4BBCECDF499B3530CFF4D04FD37B9456F
+:10B69000AA13DE5BC90D2171136F79C401F0DA0DB5
+:10B6A000F5987F13E1D03EF2E92E383FDE00B2017B
+:10B6B000F6D9C6F069C32601FD99147ED9202FFE64
+:10B6C000749FFD2BB08EBC164105DB9BA649E7BDE0
+:10B6D000DAE360F2A6F57EB403C13D0AFDE6EEFCB6
+:10B6E0002DCECB9B62BD3FF430FCF8D325F023C7B1
+:10B6F000CDFC36B9F5DDDC4EEAC2F716230027C8CB
+:10B7000087CAD93B87724833C7A1C4E987D9617416
+:10B710009D18075A334189821F406C69C77785E7B6
+:10B7200046ECE45ABABE56A13B04F4A28F17F97B4B
+:10B730005EA1B7004E9BB70EC678B675622817FD9E
+:10B740003BFFAAE0F9D8D1D0870FC0BBBCBB2628ED
+:10B7500048174743EC9EEC43AB0ADAC10EF7D657C5
+:10B76000E17BC1515541CED2584E5E8078D2C6554C
+:10B77000A22AD0FA916AE33E82EA02BC182B7D74B9
+:10B780005D099C9F0D11C19744CE0AEC9D91B5AB0C
+:10B79000AA54D8D7B56AA660B65B748E077FF457F3
+:10B7A000EB6EBABEC0BDDB548801DF12CBB802FC21
+:10B7B000857A8BA2B1778BD9FB24197C5F32BAC50D
+:10B7C000AEF93ECC7B16501379CB64E6A7FCDEF5D0
+:10B7D00061E65F8433C90AF42FF2BF00EE6B26CF17
+:10B7E0006D18E5C2CCF635F3B13EF49345FBC9289C
+:10B7F00017BB2A68BFBBFDA15D284FA63A104E4477
+:10B80000EE69033845A76607E1DDE46D1387BF04E1
+:10B810004F54659CE89D0572343ACCF57A3BF0A90B
+:10B82000B58A06749EB1EACC2DF0DD1FFCFE9D901A
+:10B830006634FDFE1E9007FE9EBF34E0F7E98AC520
+:10B84000BF97F1C6F9CFA13CA35AB1F8093FF3570E
+:10B850003FECA6F0D9551A89D468EC7B282BBE8E14
+:10B8600003ABBBA7C3FBD9676F1083BB7939AE6B42
+:10B87000BB1ADDC0E0560E72CD80DB3A51EB84F787
+:10B880009DF5990EC48F22D28DFC6A089C2217C6A2
+:10B89000F725E38DF5CB214E22713ECFB885BE77DB
+:10B8A00061E09D4A8CD7A7724C1932C50578FD78A6
+:10B8B000597700F4F84DFEE4F1099F7A587B7B8AB2
+:10B8C000FBEE1F79183E004B6C2BC334341A520F19
+:10B8D000D1D320CD7184203EF67151FB23E2F9369D
+:10B8E0004983FD81FA36BA7F475E7817FD83472288
+:10B8F000BFC5F4654F097BD78F125C16BCB35B7E66
+:10B900000ACF4736AB0C476A5B18BFA80DF438E086
+:10B91000BCA2B694A8BB39BEE9069CC1DFC5E555FB
+:10B92000CD4D0CAE99A504CF5BC12706EF9E6541B6
+:10B930003D0ABFCC96D5CB711F49B75E48EB6D86EB
+:10B940007E617F9AD8FD14427A1C48BF1109CF1B33
+:10B9500029BDFF06CE136B5A07E3793B5C7787FE60
+:10B96000D2F9B8E9BCBF76DA0FF8FFCEB648643733
+:10B97000F2B76E78639868AB282E237EF65696D081
+:10B980007EB57255DD60E081C1C72869CCA3F202A3
+:10B99000E0364FD79703FE9D72A82FC03CDCDBED4D
+:10B9A0001AAC7FDEF667EE06BDC51DE86901FE50E4
+:10B9B0003B81CD37BD957E47FD46FB0DD4AF6DB5C0
+:10B9C0006B6C3C0EBF728E671C0EB7F379DFBE93B3
+:10B9D000CDDB352C1A01FCAC5D45E10A656186F7CB
+:10B9E000E0D2BC28225D9D80F57BF52CEC77D0EC75
+:10B9F00004BA48C03F635D357C5D35ABD8BA08A753
+:10BA0000273AAD2EE8B7A69CAD731E61ED45F84E02
+:10BA1000FBBF9DAFA7467F1AD3DB5BEC96FE779505
+:10BA2000ECE986F9E4972A9A807066EF6DE6F27584
+:10BA3000E536B1F1724B9F4678917AD37CD12F6A6B
+:10BA4000CA53BA3AFB3C252C78CC22D781C874EA79
+:10BA5000BB0A9EA3146DB7AEEBECFA110FB782FFD1
+:10BA6000F33E05CF2B1E17836FE5A11DAA688CFF3F
+:10BA7000047F3B03F8F4ED4D78BFEA402583FFD9FE
+:10BA8000AF9228E043F189EA748077F189304FEB77
+:10BA9000F01C9B0244E8E37B747ED4746A11805FDF
+:10BAA000C60A7FB800F800DD67D0078799E74DE741
+:10BAB00097D192550571489913D2AB147C4238A1A5
+:10BAC000FCC48E59F01E6EE6B11D77C238438869FA
+:10BAD0003DB4FC4A6F21BB9F758C9642BDFA33F78B
+:10BAE000C27EB4F277ED8B6166E9981E833483D20F
+:10BAF000F7C67498A74CA694C5F9C1DEFB2AC60206
+:10BB00005FC1BB2565987691B2FE7CC3547F24AF9C
+:10BB1000AF0B49EA5578358B5DBEF7BE6923C17E10
+:10BB2000DF0C7A621ABC0BA87E04F1317A5044B85B
+:10BB30006FB675394A33E1DD719180FEB2A5E4F745
+:10BB400022D0DDE6832408F89151FD1F76F33ED61E
+:10BB500079FCB86E59211B81FE8F8E3C331DF6296E
+:10BB60007A84EA9DB47ED5AF3C3BE03E71FB1F5822
+:10BB7000FC49FBF37528BF57E62A49DF7D2697D09D
+:10BB80001313EBA717CF423F5EDEF6ADF8BE6CEDA8
+:10BB90007439782DAD9DB9BDB212F418AD9A62D743
+:10BBA000603AEF9D635703116A33D87995369D7DCE
+:10BBB000D7A6B07463C3827160B7473A6467119DBA
+:10BBC000EFA8F5ECFDBE8DA51F3AC2542F2DAF7C1A
+:10BBD000C2F155FAFD74399582F4FBE9C91F3AE1C7
+:10BBE0007CE6A1F2AA0C80E7C116AB5E47E0713695
+:10BBF0006A078DB647425E3AAFD6DF1184A764EF7D
+:10BC00006AABA179E9190F6838FDEC9BF5ADEDB38E
+:10BC1000014FE795607872FF7DE7F2626E7DEFF489
+:10BC200002A05B9DB073D4C8FDC8946FE72C235F5E
+:10BC3000EF46A6E3DDCEEC93881C3A0E7C39521A0F
+:10BC400056A089C1CF5A8B6BF6013F53B8DE4FEA3D
+:10BC500016E0FD48A47F09F4A1DECA6476D3B7DDFF
+:10BC60002EC4ABB33B6F7C15FCD3F3EA99BE9FB7F0
+:10BC7000F32301F783EA7D4368FF79E5F8E425992A
+:10BC8000B72AE2180DFB5324124D83F97412B01336
+:10BC90002254FE98E160F4FBF7B6DFE1B1E33ABE6F
+:10BCA0000DC6F3F8F87A3C7C3DB9C1DECA64F1B345
+:10BCB000DFE2E37EE7C18F8E4C04F8AF6226525E6E
+:10BCC000E4A4E030CD234FBFBC79DC02FDD1793C48
+:10BCD000E961F7A7BDE53D78EF2891BF833A0F747E
+:10BCE000BBCB7D612CB3EFADFCB45F9EE355E2F7B7
+:10BCF000DC047E35DADE793DEEEF01F6BE3A2194C2
+:10BD00006E1DF8ACA8C6DE9D8D1AEFA0D741BD51BF
+:10BD10005E8F0A78D03AF2F765009F4D5C5FB8BD40
+:10BD200094A0BD7A7B4E37EA0B739BB8BE20079B6D
+:10BD300081C9BA77FAC90693FE802E2C702D357111
+:10BD40007DC190FF5C6ED706BA5B50AE827E60927A
+:10BD5000AB353A93AB790126D76B5BE8381A47E6E7
+:10BD60000AB35EC2E4B8B69DEB0F5C0E67F07133A8
+:10BD70005B98BCCA003DC207E1073ACA653CCBCB21
+:10BD80008AEB2D834A99BCCC687D1CE5DA1FC0E99B
+:10BD90003208F8069397C35E7A45073005E8E73620
+:10BDA000CAA78FF1F2804AF5B3F4B87EB64EE4E745
+:10BDB0004C84E987185B4FE77998D737BEEFE1F3FA
+:10BDC0007BFC58FA5780BFEE8D148C954C748B5EBB
+:10BDD0004F9ACF2D67E7F4B9F5EC9CDA1B9CBF4F67
+:10BDE000329D3F6CF5707BD3C0ABFAAE00F48BF79D
+:10BDF0001D918FB3F7AAD6537D09FD4FDCBE9AEB98
+:10BE0000E67E0D8E3FA9E489C187BC24E42BA5F012
+:10BE10003D1DDD87FC5AA7F612ACED74A4317B21E1
+:10BE2000D07BE4867298FFE6897FC5B88BBC14F698
+:10BE3000A2C3EB30E0F085F8BA77FA2BCC0EED1602
+:10BE400093DE9399CAFD0F9D3271033C9D11F6DE7E
+:10BE5000A1738292B4FE042FE39B195E768F68F380
+:10BE6000C47D78BF31A57C96892E2591A786BC6DAF
+:10BE7000857D9E44C8CCD65B9B75B4D3A3D512F206
+:10BE800057760F30C27F77462F51D06FD86A8B38E4
+:10BE9000603FB694F37D551DED703FFD0BEF0B85B4
+:10BEA00007ECF3FA901815F2619FA3EA68E6D7C190
+:10BEB000DFED394BED77F339C52CAFC8E1A489101C
+:10BEC0009F98D7C2F06BF34405E7B1616C56BB9401
+:10BED0006FE6BF02E79F0C4E1B261E47FCBADCF93B
+:10BEE000CDAFBF67D269D339E299071E290038C7A1
+:10BEF000DF6F090D787F617EFD4B93F624391FE8D3
+:10BF00002B073BCA037660F49BE67396855E6667F3
+:10BF10002DF11AEF3333FE06FCD586C645341BFCE3
+:10BF20004B07AE8EFAD07FBF989DD7DEC1CF6BDFB7
+:10BF3000DD7323BEBF301AEED426D9F7F30DD6F742
+:10BF400017CEEF7D249BF935A216FDEA8E7D3F19B1
+:10BF5000C5DE9FD1F9EF72102DB382BDA38D72FAA9
+:10BF60007850B74BF1F7D114F85D0CF0B703051713
+:10BF7000C22BA09D987A807E0BE1F7857A315541DE
+:10BF80001C15829D14C4349354639A45EA300D9075
+:10BF900008A6D9A413D31CB0730B412EF462AA11C6
+:10BFA000552426BE5F4082982F22D598CAB06F19BB
+:10BFB000F17309B9C381F117707E01746F9C531836
+:10BFC000E7FB377B6B1EF02639AFB8C71BDAC1BE63
+:10BFD0007721DF9ECB59F8891F8DEA84FB3D2B36F4
+:10BFE000B1FB25065F47BB86F6FFC3742607F46DD9
+:10BFF00002F2AF35EE99D7201C5B6DEF9BCF1B880B
+:10C00000C35104BF3F63F43B97FB17E672F907EE99
+:10C010006D76FF2E88F77FE6829FC1544EFACAD90B
+:10C02000FD6BA31FD13D79F840E77BA6F6188F5C26
+:10C0300093A0FF5F526E27E4E725B6FF1B9D505685
+:10C04000DC0FF7C36BB45C76CEC4E43645240DDB5D
+:10C05000B5D84FA21D16991A32C3E5258EFF863C2E
+:10C060009997E0D74F4CE7C99C2E12FAA192CF0FB7
+:10C07000F766F00D14135D1BEFE81ABFD375472860
+:10C08000AC0C61CD02B08F2A9F7784ECAC1A42D3FE
+:10C09000739037F9F37FE70BBFED35D1891AAA13F7
+:10C0A000CDEF34CDE77438556AAD04FE76364C8258
+:10C0B000603FDC41EA36833E465E9190BFC13D6CF5
+:10C0C000F8FDA06170A0918E795DA1E9070DEC5E8D
+:10C0D000CE1978476904BC7FCDDE517A0FDE4DA2C0
+:10C0E000E9E8B6BB67021EBC0BEF27C1FD5B4EFF44
+:10C0F000C6B8A33BDD7340EE8FEEBCBA16EA8DEEF8
+:10C10000B0E3EF45951C5C5F0D7E2178CFC545C738
+:10C11000C9A1E339D2818F1094B7EFB5BAA26BE809
+:10C120003CDF6B93902F7F522AE2BB23F06CA6C4B6
+:10C13000E797960EFDFCFBADA087BCCBF988F17E9E
+:10C14000E47B951ADAC7BF3CB04E807B09EFCDD1B6
+:10C1500070DDEF0DE9CC4D07B9E463F1E545FBED8A
+:10C160005D05741E0B1FFB43410DF0BF82C8C26406
+:10C17000E7CCB93E264FDE7B8A603CDC7B4EFEFB83
+:10C18000488E4E9FD9CF1AF00916BEF59E97FFCE66
+:10C1900052CE25EAF1F872E2E9F431BAEFF4C1794E
+:10C1A000D4FDEE1FE1FDB5334FB1738A5F3E509B66
+:10C1B0000BFEA8229FC6CEBD0F3C8971E3B00EB026
+:10C1C000A3E9FC3498DFFDEEB7DE05FF036D87F7CA
+:10C1D000338C76670ED4B2FA6DB4BE0FE14E7C6537
+:10C1E000800F0CEE643FE31386FEB8289A85BFDF0C
+:10C1F000102F17B11CA6E8A4F01FBDFF063CD7AA5C
+:10C20000F0A5337C563B47CDC2F94772611D07AE9E
+:10C210000EE7821FEF8CF17B52722417E070B33768
+:10C220005CE133ADFFFCC96790BF9788756FDF0B8A
+:10C2300078F904FB3D93BBDFD82A9AF9C7541FD382
+:10C240007BEE772FF5C179D499BE7775222CDEE786
+:10C25000307BD77511A7BD33EDD47EA2F038BFFF78
+:10C260007B587EA6EFDD9B4E8C273BBFFFB9744801
+:10C270006B783C3F89DE88F445E1D2E24822AFFA90
+:10C28000EE4545D97DB70B027FCFF441036E75CAE9
+:10C290002CCB7915A3EF9C9DF9C7505F8E26BF2745
+:10C2A0009728EF13DFA7BDD43DE0539C4E4FF377A3
+:10C2B0004DEEF1866B7C49E448CDC625B900E71AFE
+:10C2C000B85387710E95D782BD8DF74DD8FBB45DFD
+:10C2D0000827E3FD59FDAA6B21CEF18C9FE5BFBB7A
+:10C2E000B97A9DCEE1C8EA4F63EDF359F97D504E1E
+:10C2F000EBFFDE5BBD9C8D4F04F6FB48363FFCCE6A
+:10C3000085C1FF52AFDFFA3B171DC093C7637FF7AC
+:10C31000607F32ED6FF43FDE9FC16FFEE17E1CFF58
+:10C32000B5FD187C18E81242F6483038EABF027EA4
+:10C330007F6F7B323BCFC2CF3F7DA0B019CE813E15
+:10C3400009B077A2ECADAB09C8A5DBB76F4DFA3BDE
+:10C35000797D791E4FA214523A33D1F3F39CAF3E4C
+:10C36000EF8B9F07C0F9CC7042F87B175455C9C2B8
+:10C37000901BB4FF46F077E34B4804F5AB51A41390
+:10C38000D352D28DE918D28B291E931682AB2F88F7
+:10C39000E99F2B7B2A60F18B1DE1872054D7EE08A3
+:10C3A0001F077CFA6058F8117807788D7BE924988C
+:10C3B000FFAF7DAAF17BA224E1F7D9E2BF2BA281D6
+:10C3C0005E332330905E4354F9FDBEF88D027C4706
+:10C3D000F8651FAE2FD5EFCD25FC8E25BF476CC06D
+:10C3E0006109E9C438885FEE5CF102BCEBB370BF51
+:10C3F00017E5C1F09D4DF87B620B497716DC2F1DC8
+:10C40000CEDF93206DEC1D0FE39D88916D76CB3BC5
+:10C41000164B127ECF6811FFFDB14589BFEFC5EF06
+:10C420006F6E840F49E20812EF7FF6FA52BCE75AAA
+:10C430009AFC776512EF7FEEEF1431BE6705C40BEF
+:10C440000971BE37724F9DDD8A5F9DD71499DE83D7
+:10C450006A1482CC9EF6BA427B85FEE38C53197E29
+:10C460001D1084A47164DF4C33EC9B26723DEDA754
+:10C4700071B1AC82BDD91875E13968A3CAECC2A10B
+:10C48000DE2A07D8E9C42FAA703F659A3419E3CB96
+:10C490009525F23838F73CB67B6137DC5F680CC80D
+:10C4A000E8A71DEA67E7A0648888EF0334A94FF87E
+:10C4B000E7C23E79D839E33095E0EFA11E695F29E4
+:10C4C00042BE919A2D83611C21DC8DF76E86C88453
+:10C4D0009FBFCE189B85EF98F138A556BC7F3C6571
+:10C4E000C96927C8F53CBEEF5569F9B84E99EFE721
+:10C4F000AEFA537EC0D3E7DB9B5F9E46FBB3456538
+:10C500008C6B2DF9BCF1F56974BCDE768598DFE3A0
+:10C51000CC5D255BEECFE6DC65CD2B09F788656247
+:10C520002AA7F972181FE148F544735C55668839EB
+:10C530000B550FDE0F0EA5094C2FE6F90AC85390D4
+:10C5400074D822552E3ACF8E3705F43B1C6D9F9F31
+:10C550008771FA3F09E7017E1BF890B87F4A9A6617
+:10C56000BCEFE1E4F7839D705897883F4D0DA41808
+:10C57000FCD18EE831D715B08F276CF89ED45AAE17
+:10C580007FCB1E16FF6EE04B62BA3601EFD67E7E81
+:10C5900023E25D2FC5BBDD03E09DAC6AA827D872FE
+:10C5A0004810C8C396D99DADD276573CA3043D141C
+:10C5B00064D37E5C9A06FACC15CFDDCCDEF5A3F011
+:10C5C000C27721EB9562B0FBEDF599C57206D4F305
+:10C5D000203E7EE861E73F72BD3B08E58DED150129
+:10C5E000CD84D7CD0D6AB15C0CEFE3388AE1779644
+:10C5F0009A53FCDEF330BF580DFE2585DBFF77A68E
+:10C60000B1F9DE99E6C674451AF35B3C28EBB360DA
+:10C61000FE0F52FC817881237731FC5D31C481F7B4
+:10C620009E573C5F3878A038A07D0D816280DBCEBC
+:10C63000BB6AD0EF51B9FC9813DE055BE175A880A9
+:10C640008F926FF8FD9301DF5FB0E1BDAF466F855C
+:10C6500036D7D49FE49B807E2549D4B3C1286AD9BC
+:10C66000F2D6B5F244C0177D0748A248DAF16B65EF
+:10C67000CA5F3ABC7AB640CBDBD25E60E583F41D7C
+:10C68000022D8FA6FD86E587E9D9F04B221D692F83
+:10C69000B37CB1BE03F29D69BF67ED41B7A07ACC10
+:10C6A000A1B4D7AF053DA7D1169C0DFE9D1FD1F9B2
+:10C6B00097D2F977F2F4A71C4E46F913F09DC2FB0E
+:10C6C000204F13CB9FE6ED0EA528FF292F3F9CA2FC
+:10C6D000FF9FF3765D29DA1FE5ED8EA5687F9CB795
+:10C6E0003B91A2FC055EFE628AFE7FC3DB75A768F4
+:10C6F000FF326FF74A8AF6BFE7ED5E4B51FE3A2FE5
+:10C700007F23A1FFB778FD1EFE3DC7DBF23ABC1BBD
+:10C7100096D3CE5E022DF1B6A0FEBEB3AE1CF1BF25
+:10C72000713CD3330C7CCF81784D9ABF52657ECD5E
+:10C730002B55C6E75FE1785DB9BC680BE0DD8A7F09
+:10C7400093509E523982BFE7AB2F67712F2B9E67A4
+:10C75000F741562C97F1F7800C7C34DA1BF3DFC5D8
+:10C76000E7D764C031AD809FB7048A6798E33D5531
+:10C770006BDE41E90942769A32997C29595EE518C7
+:10C7800001F283CA17E09B6B3D4A17DCA35FABCA7B
+:10C7900058DE9459A542B9AECA287FD6665639E606
+:10C7A000A23F271DFD13793C6EAF4995F11EBFECEA
+:10C7B0009F82E5D37E3C43053EDA447AFD95B0BEC8
+:10C7C00055329ED71EA9ABC2EF79FE8FFDC09F7F69
+:10C7D000E367703FE63DEE84775FE5EF88282F86BC
+:10C7E00003FCE8B805ABC4A846AB1C535788907F40
+:10C7F000B889C92BFAE71D6B7A77B16365C50B1051
+:10C80000BFD3B8490EC2790EFCC9267950C47FF750
+:10C810005453D32DF2EA41EEC7D5030E8CC32B92AD
+:10C8200049C0FC7B989A2AF17729D83B668511ABE1
+:10C830007CCA6FB1BE63F39FD7EF7F0B008000000F
+:10C84000000000001F8B080000000000000BDD7DD1
+:10C850000D7854C5B9F09CB3677FB309BBC96EB2FC
+:10C860009BDF4D801024C006420C88BA090122A229
+:10C870002E880ADAE286DF00493670A962C5B22145
+:10C880001103450DB71181825DA85AB462438B1222
+:10C8900031E88A88F8157B43AFF6A2F67A17A48AA6
+:10C8A00080B06A45FB63F9E67D6766B3E7245168AB
+:10C8B000FBDC7ECF870F1EE69C397366DEFFBF99D7
+:10C8C000CD23CA89A889E09F8BF984289A764EA344
+:10C8D00069B052C4DBF4AFD16553B52DB664C787D8
+:10C8E00049F41F5EE2BDA82364D9EE65932DB439E7
+:10C8F000E917C503A2C584AC30A58C2003685FF896
+:10C90000732D21CDAB3AAE19A42764EB2A3A2EBD84
+:10C91000367F3D7A26292524966CF1ED900859B38F
+:10C920008A8E3FB8A7FF681BBD3986906D4A683A6A
+:10C9300071D06B58214D745EAF2C9709B497B94DE7
+:10C940006123EDB2EC8DFFBC6E08B497CA5EE2E9DC
+:10C95000795F7B7D72956B307CFF2D3A2718571FCE
+:10C9600090069F1C4DFFAD045CFE644206B625ACEC
+:10C970009FFECD6FA5ED84F5EAF57E9BCD4A48DE9E
+:10C98000B7C04DEF7CCB1E2886F1151C5F3B8F6F27
+:10C9900083EB1AA9B1880CA4573A57804FC829874E
+:10C9A0009FA0EBCC5E71EFB8936984641DB2B400B4
+:10C9B0005C49DBA384A413A2836FD3752B92CF436E
+:10C9C000281E5AF24BBC12BD1E7ED6C2E0946345AF
+:10C9D0003819246FC6F5F46A94FD36189FFEF1C12C
+:10C9E000F80FE458B6AFCB8766C00470C8DE4907BD
+:10C9F000CC84F6C0B53E85E289829B8CA37F43BF81
+:10CA00006BF5D175ED94E2ED6A6877840DBC3F89D2
+:10CA1000C0FF76CB127B4EC7575C84EC9224F63C69
+:10CA2000E4ADAECAA6FD15DB30C54B48D056DAAA38
+:10CA3000CF81E7B278DF47CAE9FAE07BBC0D70F935
+:10CA4000F941F1BCB2B56A101DDF40C4F821E8BF5E
+:10CA50005B9679FBAA56187F57A5787FF05A5F3608
+:10CA6000CEE77A9D9D90FBDA26B65ADD3DF37D68D0
+:10CA7000C3F5AD4D747D9F78A2297419A47EFBC9BE
+:10CA80007442875A3333E007380261FB8713724AD6
+:10CA9000F220BD08FCE9F75484B2E8ADF387FE9CB0
+:10CAA000524CAF415DF45012855F7D67C0A42FA04A
+:10CAB00070D6FB4259F93DEFD5EF994602946E824C
+:10CAC0005D2578EDE3BDC38AFC77BD67325CC2F7B4
+:10CAD0003E89FCB6E119FAA85E1768B50EC4FE845B
+:10CAE000E1BFEFF589F73F79E6B7B7C2F7CE79A294
+:10CAF000E953802E23142E7DBC27FA37745610A0DC
+:10CB00007B29C9B7DEE624641E853971027F357A38
+:10CB1000A17F87A9CDE6A5CFCDFA36BF97F6A7A806
+:10CB20000CCBE53DD7876D83703CED7D2DFF749870
+:10CB300048DA544AD7A13AC5FB0481762869046DC6
+:10CB4000AFAF574637D129AD2EF9DDA862683F67F0
+:10CB50002546DA6EAE3BE82A063EF21A08152F6427
+:10CB6000FDD80E37F0714BBD61E6E340BF9165AE75
+:10CB7000F9C53DE33F64D7E33CD6BE46F96C24BD1E
+:10CB8000EA3BEC12BC3F5821C087663BC5336D9B26
+:10CB9000DDA924940FFDACEB811FD7EA03D595D016
+:10CBA000CF2D9327E877CD83675457D279B89CB2BD
+:10CBB000A4C379541D5B409F37DB0C20D9C87BF69A
+:10CBC00039CF019C7EAE781B810F7F6EB5DA42F4BF
+:10CBD00001958D3EE05B65B0230C6DA38E3476D05D
+:10CBE000F96595107F87B5679EEF71F9F89ECD8046
+:10CBF000705E6FEE985641C7B12C936D21FABDB5AA
+:10CC0000F51BBB27D1EFFCB8FEF9A34DF4FEBA74B7
+:10CC100085C03CAC0E256248A1747C039D239DF722
+:10CC2000AE26BF0DE467CCA9901DF4B9659081785C
+:10CC300012E4A0B598B613E4539A43F199E9FB7F47
+:10CC4000B2078EC0FC47BFF99609DE778D9165600B
+:10CC50009B0E85E139A5543D8E6DBC7A9CD42AF596
+:10CC600073C754F5F3F419EAE7AEEFA8DB99F3D4F0
+:10CC7000ED5B80DEC640473AE732BA0EF68858A22E
+:10CC80009FAE2229089F7700FE9642D90BF031D73C
+:10CC90003F7E6A017D9E05F284CE9F8C20E127288D
+:10CCA0003E0FE47EDF13A57036A6367AECC5BDE1F3
+:10CCB000919563BA1EF0651DA4D808ED6FFDFDC700
+:10CCC0005FC3F85692D02F1FE0E3FBC43686B55DF4
+:10CCD000743EC9F00F0FC0BBF17FEE03BD7754E780
+:10CCE000057867D52BF8FD076778C2BA7CD69DD04A
+:10CCF000FE29BC7F8A697DB76E04BDFE7EED525D64
+:10CD00004A6FB8A6934609F892D207EA0B524350ED
+:10CD10005F3C20935AA01BCAAE04C6B3C10B54CECD
+:10CD2000F8530D0827C5CEE887FE4B86E7E936366F
+:10CD3000A6C13DCF0CFC7CFF2146FFF71BD838F184
+:10CD4000F13CF851544120276D765935CE461BEF02
+:10CD5000C3DB4E3B6BEF3E987A3DF0E5C619A9A3C5
+:10CD6000804E8C3209C07803B24DBEA1747DE63787
+:10CD70000C21890E3A402107F5A9B4BF85DCE9A74B
+:10CD8000F3D87CD812D2D1FBE6F9FF6EA34026255A
+:10CD90007CDEBB577BFF13E440AC4641389A9D6D67
+:10CDA000B651C56C0D213ABF54F807958F1583DB3A
+:10CDB0006D804F73451BEA6F73495B1BC069F35469
+:10CDC00019ED89D47932D2B339A7E3E8207A5F3FED
+:10CDD0005FB6C178A954B11BE8203FCA6EF3FB616E
+:10CDE0005C0A73B98C910A8C8B2BA4DF49E37075B4
+:10CDF00038F6DC2DD171D260BC11AC3FC0C9CEE198
+:10CE000034D6EE413E75F071D306D1FE23D8382DCD
+:10CE1000653DE3083C6EAE2661989FF8AE18273E4C
+:10CE20003EF1492057F5BFA670A37892724D38B9EC
+:10CE3000FB1793B0311FE0E36FDC8E7C6D253B80E8
+:10CE40005F1CD99540479987B74C9747C07B16FC24
+:10CE50008E7E3E09031D672AC4744D2AD82F7E8416
+:10CE6000A3965FDD07DB6EA63C12C78B967FDD0ABB
+:10CE700069D5A5F6E663B7C3515938A20F7ED6F03F
+:10CE80008BFB70EC7B40F45ABE7E2CE95C09C085BC
+:10CE900024F6D77D7B5BA7EB383A09909541F504E2
+:10CEA000057DAEE67B84FCCD086D89C89E8B034171
+:10CEB000EEDB391D537D459975F728DB042BF0E92E
+:10CEC0005282F455B977FDEDBFA6E35D186CB081D1
+:10CED0005EC939DCD60DFA91740686001EB62A8129
+:10CEE0009F24D1E75B8F651090DB6BCD6426D0B7B4
+:10CEF000C2E95CAB5F1E02BE71226B8465D7DF7F27
+:10CF000015F660C7A0F461361B8CFBFA6193F37FC2
+:10CF1000D1CE0A0D433B2BFB60779315BE6F9BDC94
+:10CF20006AA2F035BFC9FA3F48DBA14100BFBA3C55
+:10CF3000E0C303390B104ECABB4602743A5CE70BE0
+:10CF4000439BBC6726207F773EF79D5A0FC89FF40E
+:10CF5000291E90433F017EA7EBD9C6F95EBB7EC573
+:10CF6000E00B803DA1BDFF685C2EF94FD5503C0E13
+:10CF7000FFA981ACA30F8BE439ADF9C0176BA9FCF5
+:10CF8000A54FE7E83C0D3F947AF0D369AED86587AA
+:10CF9000EFAD32918091AEEB2B89042873E6387E99
+:10CFA0005B01F227974424D0B3B98DD4E005BA5A77
+:10CFB0006E2181047ACFFE4AC1FE9D66DF2E3B972B
+:10CFC000FF262A07F4EC9FE4E7A97E52E360320AC9
+:10CFD000EC17FD3396E3203788A3CA17F7370A808A
+:10CFE0007EA9DEA7DFDBC7D7ADA76A423F8AFEB5C1
+:10CFF000CA11E388DEFD5FE6FD14933502F252B1FB
+:10D000001E3986F2C5A69C4DEC670A337D43EA487B
+:10D0100078B0C4E082ED7FB3613B8BCA5FE328B494
+:10D02000FB434698670AF33F88CFE771A403BF101C
+:10D030000472B689B49A683FA476CA6F6ED26D4600
+:10D04000BBF920F1003F5088D9C13F845B00D7ADC8
+:10D05000845427F281B88EB4313E5056E8D05F1A1E
+:10D06000F6AA19E7A36F246133D84330370A6F65F6
+:10D0700039092BE06FAD3060BF91360FBE67208D50
+:10D0800068CFEEFAFAFD4C90D39643D41E1B097874
+:10D0900096514E592C6AFE23A409E1F409E7BF6DAD
+:10D0A000AB6C88E7B87F16788BE339DA04FA22771D
+:10D0B00079AA0ABFA25FF6575924303A71DC308E44
+:10D0C0009B3DE8A0448AE1792E3EDFB6CAF32DE30A
+:10D0D00017F433BE1BE9A8FFF1B3F1F9B6C85BF64C
+:10D0E0001B2928B6C60EDAFD9E1EFB5A0BE7ECE59F
+:10D0F0006AB93CB253DD167031EB7D8E6914E6E6F9
+:10D10000EFC9DEED74BC2B8FA9FB55E7BF8DFE6D1B
+:10D110004FFF88E366E84FFDEFED201D4EA9FBFBB6
+:10D120002B5EB3031FF7F467F3BBF62B753F2D7E21
+:10D13000B4F3A5F372DE9230AF0926A3EAF9CC9AD4
+:10D140005EF372DE9630AFC92E75FF4053DFF3BA3F
+:10D15000BEC8F88DF312FD6E2ABFB47EDA75DC5CB2
+:10D160006DEC07EEACFF6D332F6DDC3B6ABFB9DFB2
+:10D170009D2BB4DF0921BD5F2FF97CA9F43A076E1E
+:10D1800081BD68B5A0DDABA5975D5C7E4E067B8E4C
+:10D19000F69F95EC9B9C4ADB1305DF3DF5BBDB411D
+:10D1A000BE1C7EF68A0C90EB59A0E7109E2CAEB008
+:10D1B000BBCE857185EFF2FE549FB480BCD8BD9381
+:10D1C000BE97C2E695683FA5D531BFC24662C8CFBB
+:10D1D000C25E4A253689F9E3CCDEE9EF3BDAF1D7C6
+:10D1E00071FF73EE8A09E403CA87CF1B6C150AF836
+:10D1F000678F49680FCCADF2E992297D8C6B953031
+:10D200006E34F79E7F1B0D7265EC494F6794DE9F6D
+:10D210001BB67BE1B30DDDC417A67495A15B5A72F2
+:10D220001FBD3E7280DA3FBCBD14E8CDEAF380BF7B
+:10D23000510333A2E39CD53796D8406E7ED7EA03DC
+:10D24000B95933C3F70EAEF7AFD42AA1FDE6B3A5A3
+:10D2500093BDEDD30C1E6A67D47CC7530E764F4D39
+:10D2600087D9875713512C741D35D41E836B868143
+:10D270002866B85A8809AE65AB99FD9552EE37D449
+:10D28000D0EFD774FDEC0B786FA1127985D993613B
+:10D29000C45B4DD71B7F027B6DBECF6F0079316CB5
+:10D2A000A781D9A49C1E8677A8DB200F12DB25114D
+:10D2B000757BF46175FBC35406DF7D527818E06717
+:10D2C0001F5570E017877619515F1CD86F44FC2CEE
+:10D2D0003963D90EF1A7094BAC28D7CF3C6DC6787E
+:10D2E000D43EB9E35968879E4D42BFFA9577F795CA
+:10D2F00049B4BDF817C9323C7FF16B1DC21996A322
+:10D30000A7F7973C3B74FB3A7A7FC9E88E321BBD86
+:10D31000FFFC158474C373253C02D6F7FCDF743818
+:10D320007EEC29637807A587332FFCECD97BE9F7DE
+:10D33000CF3C95952A51BC5C05FA80F61BF75393B8
+:10D3400005FC8C71679E1908F262C94EA36A5D4F95
+:10D35000A7327B83223305E8ADBF78E289B53FC3AE
+:10D36000F78B4E1D437ADBA70FC91658FF5A465F4D
+:10D37000DAFEBB5399BE11F380F7F2297ECE7F6CA3
+:10D38000B913E2684336A9E13B34AC6EBF90CAF4EE
+:10D39000FB1C92703F1FC62B58E3023B753B417B41
+:10D3A000A6E8D4EF6FCF073BDAC8EC07ED3C0EA43C
+:10D3B00032BE7EFA693A0E930F3A663FD315537E1A
+:10D3C0005CC2E9F84589D9AFF4CFF22C4AB74B409B
+:10D3D000F117F4DC5FA2998718FF077C9D0EEE57CA
+:10D3E000C7DED4213E4EAFAA1D7D7270EFF97CB826
+:10D3F000AA716895BEA7BD60D3D2436EFA5EDD6E9A
+:10D4000027FA89E27EDD53AFA6DF41EF9FDDA978E1
+:10D41000C174AD9BF5E443E3A0DF53BA0E982F3CF3
+:10D42000F7D1F59EED782D05FA2DD86A1FA54BC0D2
+:10D43000C3C24DDF1B5A95200F2F971F04FFD671D3
+:10D44000FF766F79F7A42CA0EF4D9217BA2DE9B8AB
+:10D45000E5E61BC056D9AAF30EA6CFCB14E2D78DB2
+:10D4600042D77B065CEB763F7728933E0FEE1F5347
+:10D4700006EB5A27FBAF1F0EF4FF981EE3585AB86D
+:10D48000FC85E39BBE1F91E9FBEB6EB5D686AD38FC
+:10D49000EE41681F28DAA183387BCA292A9FD8FD6C
+:10D4A0006332E5C9535DF78F8078E23EBDB515E87C
+:10D4B0007C5F32C34368970EE53C89B0758CE3719D
+:10D4C000E325FFDD6E50E8F5D4A9D529158C8F50E2
+:10D4D000BE805076D0F5D5FE7438F2DDC24D6A3E7E
+:10D4E00011FDC47C1785D5CFB5F4919526E20DA426
+:10D4F0002891CEB4FDD2A6860CC057752BA83C4E01
+:10D50000B07FEA4EB619C06ED27E072C4022F0AA38
+:10D5100043FA241E5CAF99AD979AAC26BADED3F0DD
+:10D520002F16F796C02F5F2CE112C9922B489587D2
+:10D53000C273C974520DD77D52E4211D9767187FBD
+:10D54000DF9584F2ECAC2DFAE48F81FE9EC9F18662
+:10D55000E8A34C1E973BEB89A4A4D2EB79E00BA087
+:10D560003F1B6B2FEEA2F29CF2F7994F0C28D79B32
+:10D570003A5E4D017C9D7DD62CCB142F6776A75546
+:10D58000423CE76CC7AF53605DA73BD22A212ED740
+:10D590009FBCD1CA29A1CF8FC33FC7526598E6BBB4
+:10D5A0002A0DE4564B1A18E32423ADB1A4B10FFEA3
+:10D5B00017EF390C8D251E901BDFB57A77303811A7
+:10D5C0001F6D7F76386D07E05BC8A91A898D2FDE45
+:10D5D000BF318EC76F968FD5EB86621EE833E21996
+:10D5E00000F27A1A287AFADEE1570A0780BD20EEA7
+:10D5F000373AFD33D2E87D5765B74F0771C429C468
+:10D60000DB4CBB7EA0F3DE65A3F89A47A8FE826BD5
+:10D6100069C08071971627AE6FAE42220AA5F7B98E
+:10D62000A05F47601BF13577AB146EA6EB99B75E30
+:10D630000DAF05EDC61E3AA17F17112A608111B703
+:10D6400026F4A3E32F023D4AF1B0D844224974DC0A
+:10D65000C58FABDF5B4222389FBA672E1AFBC2C769
+:10D66000171C1F8D4E5F7D9A4A0EEA510E2E21FE29
+:10D670006BE0BB4B84BE7E8BE12B78CF3D43E75103
+:10D68000FBE3FC8A7B87CE4B837822F1811D41DA54
+:10D6900093918E975491480E9DD7922E29323CA596
+:10D6A000675CF24B89F96744C1F57FF116C3DFED82
+:10D6B000DCEE994F6F831D7115F8EF80EFCD12CE20
+:10D6C00063DC33522899FA49F34DD4C503F9C4D722
+:10D6D0000BFD07D0F6421242F83C9C968F785B44D3
+:10D6E000BA0D8C7FC2CDE9F4BB0DA7A84C2297429E
+:10D6F000076311DF9F132FE2FBDFE3745086F421F1
+:10D70000EE53FB8698537BBF0F78F325C0B976ABF9
+:10D71000BA4D1E4F6817005E683B015F0D7B2E1AE5
+:10D720007D7DE0E991B87E0B0F9D363C913F98FDE1
+:10D73000FC3EC7E323B72C70833C7A18ECC94C3EFF
+:10D740004039C86F22E22311131DDF329AA8E22567
+:10D75000D44EC3F62FD2FEEBBA4DD9846CD4073029
+:10D76000EF3057E73F0429B281E9815F01DDCF95B2
+:10D770007DB90AC2D557887EF30A460F8F8E6A1C80
+:10D78000DAD887BF2CE6BF51EA88C8209F5E60F6D2
+:10D790004672694C1F48E0F737D3981D33E040F4D8
+:10D7A0005016D0DF7312C6F7374BA445A2707651DE
+:10D7B0003C835EDA2C1D3F047A6CF3751ED24C9FBD
+:10D7C00097EE99B6F435F4B92D5EC897D4EFA9D089
+:10D7D000D55B71FDCCEE4D6ADC2ED3E71977168D43
+:10D7E000023EA3EBBE733ABDFFDB340FC2CD6D65C5
+:10D7F000F4E35A1DCA5F06F1DD03FEA5AF01DD0D9E
+:10D80000B7601C2D83C22A3915AFAD60CFBA4893DB
+:10D8100004FDD63825C4C79A1A32F397C548CDCA35
+:10D820008054763D46AF92425A202E9CA150FB98E0
+:10D83000DD6F81EF3C92C2E6E59475774E03FB7C89
+:10D84000146BA7AE947C3B508F6D403864184935FB
+:10D85000AC1BEE833D4FA7E1DB8DCFC338EF8C09C6
+:10D860008D25308F8C81ECEA3044B2619C23824E4E
+:10D87000BADC32E88DE55CFF2FDF5D91914ADF3F36
+:10D8800072D6A4803C3FE212F668C40AF628195406
+:10D89000C4FA733DBBBC64420630B52357DDEFBC10
+:10D8A000DE376034E8ABA33ACC1BFDD1EA1B60A79E
+:10D8B000FDAE32B07568F1AF7330BC06BF92483828
+:10D8C00021FE109C7901EDFCE0578AEAFED955262D
+:10D8D000124E883FD4D51E9804FDEA49F71AA0C716
+:10D8E000FA8E24124EE08FAB2C7D7F57F045F02B43
+:10D8F0001D098D46B2CF8638E9117D6CCD7CA0C361
+:10D90000FD12C6B382D4AF0F25CEEBAB34124AEB77
+:10D910006B9EE9EAFB743DAA76E797D88F9447534C
+:10D92000E03BE76CD1143B5F1FF413FAF77C580E11
+:10D93000E947629E92E96188335999FE9A06F85543
+:10D940006229D3937BC615CF61BCD484759E9B6935
+:10D950002011C44B0CBF0B700B0D21644BD7A706D5
+:10D960000FD8235DAF20DC04BD24C22F9498B76A82
+:10D97000EE8EC854565CDD9EB3AED84C517580CB4C
+:10D980008550DE3ADF78FA5C27ABE44452695C6E7E
+:10D99000A0987A04B2681857F5AC83386BBCCDFBFD
+:10D9A000C7DF0FE54FA9A2E39516B3F727B717FC1A
+:10D9B0009FD5A003491BD3CF4A2CD79F9CD0366953
+:10D9C000DA56DA1E9ED0B6699E3B34CF5D9A763623
+:10D9D000EB7F363992ABF31232BDBD708A42E5D689
+:10D9E00059776436F5A8C97ADDD02955B45D5FCA88
+:10D9F000F47A4397E44535C5E1D7E06576ABD51BAE
+:10DA000035CC2D0638741F02B952D729D924CA073C
+:10DA1000D68EDD116CC37B9E84F73A247CAFAEE3D7
+:10DA200038BED7EFF84532F2F9BAA213AC5FC74758
+:10DA3000683FAC69A9C1FCBEC85FEB88DF9725F5DC
+:10DA4000E4AF857C3DE7F6BD2A33BAB625FA7341CB
+:10DA50001837216E24FABF37BCEB6D304F92967F9A
+:10DA6000DA04F6F47FD77F3406ECCBF7B81ED9285A
+:10DA70008587C277B790C050D0A3DFAD1FFC8A4C1A
+:10DA8000FBBDAF8F6E831CDD86F66B107EEF2747E4
+:10DA900073242A637EE4B88EB59DD16D00CF8F1DAF
+:10DAA00053A628749CF773A239326D3FDABE9CB539
+:10DAB0000747B741FB654780F51F1ECDD1D9C0553B
+:10DAC000AB9952459F3F61EB9B9F5BB91C11F333B0
+:10DAD0000FF4353BC07EAC63FA671BB57F4D545ED7
+:10DAE000CE5E7C7AD713140EB3BF9F8472EC89B3D9
+:10DAF000374F61FE41C8AF9441FC97FD41FD8872EC
+:10DB00005E41FBC20D3A31B5071FC9B9DD1ED41FF6
+:10DB10005734EE06BB25637631EA8FB169BED3F088
+:10DB20005D71FD4526BB9E76D8985CD6C9980FCF0F
+:10DB3000B83719EDBA87CD6C3D946F10BF568E8FF4
+:10DB40006D0E66976E7330FF7649DAC4D30E7A7D18
+:10DB500057F26D3651B8BFAB272133C8D94516B43B
+:10DB600097EED84EE50695DBED7CDEED1BDC61C85B
+:10DB7000E7DF21113FC815213FDAED3E776A825F6A
+:10DB8000D45E42DBD61E3FB87D9ACF6D71C0355D45
+:10DB900086BC8F904BEDF9EC3DA18F329AD977324C
+:10DBA0001E1EBA03D691A4B0F8D5FC99853B9AD035
+:10DBB0001E988EF3253E9F1BE220271715C810D70D
+:10DBC00012F8B962A06F2FC0E5769E17107812F890
+:10DBD0003CCDD73D5747ED09BADEBF380308476A49
+:10DBE0005F8CE0F133B42F4E836E4F802F51A263D0
+:10DBF000E0FEFF4770FA3D3CFF47E154BF82CA0B8D
+:10DC0000F912E40587DF4629A2CF60F202FD79B858
+:10DC10000F7AA7332D1083F1C5F767DF5B8FF6A46A
+:10DC20009857D2DD7BAB6F23BDF94C6BEFFD19F03C
+:10DC3000E5ECB14BBD220ECABFF3FEBB26CC7BBCCC
+:10DC40006FE840B9F93EF5A39A40BEF0BC7DD9F724
+:10DC5000971C017F548C1B70EA70BCB592CF0DEB02
+:10DC60005B4BF16E82F94F33A0BF21F46ABB3DBC20
+:10DC700019EA26DA6FC9C6BA89F384D5A78456246F
+:10DC800061BFABE41304E2AAB1B136CC9B533AC1F5
+:10DC9000E7EDB30AB17E85D243C80CCF293D419D43
+:10DCA0005F7B095D108C37EB0A7C0EFE3AFAD9B324
+:10DCB0004C385E1F74C2E2D443587D467B3EA7C3F6
+:10DCC00045054887E9CD2C1E4A14DF8869097A7E0C
+:10DCD000BC93E139A934FADC7F01CDAF37A33D0B0A
+:10DCE0003A16734A6D19381EC5FF60278B4B209D6D
+:10DCF000CD7B2899D7C379CB00AE0F2433BADC6A29
+:10DD000066F9AEADD47E46B9C8E957D4E105B89DF1
+:10DD100017AD9553C05E18ED8CC73B7C107FC07863
+:10DD20003B7D3E272A1D07BF6F4E481731425CB826
+:10DD300075A22F9AE0BFC01FC817DEC9E52AD944D3
+:10DD4000D0BFBA13DE4B81F12D29901FBD13DE0722
+:10DD5000FF71E544551E7022C8F0313DF3D3CAFD72
+:10DD6000894E1EDF6C7BD497F81D31BE763CEAC726
+:10DD70004E723A11CE9101E04734E9108FDA7946BC
+:10DD800037B1B87974531ED29D18AFBF79FE8F2E6C
+:10DD9000F63D89EAC10513987F2FFC9EF9DCFF262A
+:10DDA0002BD57E1DC479E26D5DEFB6D64F84FCBEE7
+:10DDB000BA3FB35B928A6306CCFB7824D5FC05BCE2
+:10DDC000FA83439DC0E725C24DE8BD47CD549E521E
+:10DDD0007AD904759094BE36DD93847ACC61080FAD
+:10DDE00005BADA02F535A84F99FFFEF91175FC4521
+:10DDF0008BBF1FC4E9EAF2FCEE26C0B9B3B7DF1D42
+:10DE0000B4C41E03F8072D8C2FCFED4F46BE2283DE
+:10DE1000A2B3A1EEEDFC3E23017E6890A2852027EF
+:10DE2000CE49BE1AECD794E401FEFC406671812015
+:10DE30006084AE3318FA0BD65B053BD57EF839FA11
+:10DE4000B796F2CF39395A06E308F902F204EDAC7D
+:10DE50005A96876A904908FCB4ABE4398BD09E98F7
+:10DE6000954976E0FDE385E09709BD41FB1D94529D
+:10DE7000191902FFD5717C34C827B05F1DD44D013C
+:10DE80005EC05F83781F3C4C885337AC3F83755B23
+:10DE90000D7BD47453D74357D24509DE4BA033943E
+:10DEA0000B218423DAED2047AA581E3D99B793AA87
+:10DEB000BBB18E2BC8E32FCE03D149209F924B3BA1
+:10DEC000C81C7A0D9E6276CBB8AEEDAF825F6EAFA6
+:10DED000EECE01760AF278A7A01B31CFB15D1B749C
+:10DEE000E0370A7B27C16F1D3A5D15B7588DEF816A
+:10DEF0001F0CDF8BC22D379015D3931BB99E4C029C
+:10DF0000871AF469DB10D4A7A0EF40CE093F1AE4CA
+:10DF10001ED0D5C0F4CA23C0F72FA657BEEE74B2E8
+:10DF2000EFA17F00CED7D8FEE94EC047F4037FFAB9
+:10DF30009BE3905C7E13167F5CF686F31BE9FFFD86
+:10DF40004BA6FFA11940E7CB244F06D0F9F138FDCD
+:10DF50001762BE52DCFF5017C038A388772D82F8B5
+:10DF60001EBDD67139B480C7C71688B8D826755E6D
+:10DF700015E2D189EDC5224EB6D3D8536F04F2A372
+:10DF80008A4492E978F51067836B87FABD061263BD
+:10DF90007CD479D1A8CADBB63338DEC9E9C95E15AD
+:10DFA000D681FCDA6C66F13221D7C6ADDC8E7432D4
+:10DFB00060942FFF7EE09B37F4186FF903A70301ED
+:10DFC000974667E551C0A745C7E381F71B519E9F60
+:10DFD000A476C26E1EE7990EFEF1AAC050A897273C
+:10DFE0008A2D37D17F16D775FBCCB5687FA7CB2A92
+:10DFF0007A7DDEC9EA9B30FE85FA2209FD012ADE20
+:10E000004600BD9615087D4D4640DCEDB89EC5CD59
+:10E010001B6EB50660BCA8CCE4A13B9DE929773A0C
+:10E02000AB5714EDB8FFC9E951E443210E95988F21
+:10E03000F0C4FB6FE075C804D7BB7111AF778FF3E5
+:10E04000858CF22DA9D88F7AE12AB912E55BEC63B1
+:10E05000AB07E0527DA66E11ACE3B399160279C905
+:10E06000793C1EEE4DB7E3B8228E7DB9F1F0D1E9CF
+:10E07000717A54C5C3F771B9B88FB0F9865A8C2C30
+:10E080008FC1E7BFEFD41561CE1F21909BB1DD6634
+:10E09000A68FA99D0CF27ADF9E216158CF713DB306
+:10E0A0006742FB93F9FB81CD10A7D9F74BA717EA7D
+:10E0B000A0828B4F8F00FB76DFA9A77FF51BB8BF2F
+:10E0C000DFE8057F741FCF63D419228568CFF3FA88
+:10E0D000CFBA944821C4A55EE4F8AAB3D036BD7F78
+:10E0E00083293035DDD9936F84F7E0FE8930F31B47
+:10E0F0004E104607A1F52C2F4CE1EB8679C4D6666D
+:10E1000060BE12D60578F860FF709CF7463DEFFFC1
+:10E1100020B32F4FF0F689174AB01EF2BCDF80F50E
+:10E12000CBC187993D3B57F63CB60264EF4B49188B
+:10E13000079DDF7E14F347C187164E85E7C1C52BC7
+:10E140006F24DF9057013D9518C73F4762B9E8A794
+:10E15000D7167444E877CF750DF5B2F4A80B937118
+:10E160000DBC4EF624852FCC3BB65F8FF0BFD4F1AB
+:10E1700031A059C6F4257C279898BF42FDA2CE67EE
+:10E180007D5BFB9C3E5A780FFDFEDAD4C00FD213A4
+:10E19000ECD8E04B6E94A31F3CF8652EDA3B6D2C57
+:10E1A0006F7252EF9B0D7C62AF8A18E624C8D78D40
+:10E1B0009C8FE71AB95D4BE56022DF8BE765956AB6
+:10E1C0003E13D747D2995C4EE6F512BD9F8B7ABCC1
+:10E1D0009B8DA08F59C80BC6F5E0FD3C9EC71C77F0
+:10E1E0002AF60AD49DD57594609E346F6504F99221
+:10E1F000C23B02FEC9C9CDC94C9ED065C2380BCA0C
+:10E2000009DAD50B74ACFE638191DAE9CC2EC0FE3D
+:10E210001F6ECE403894AD66F669EC3909E5A2C8A8
+:10E22000E7D610F6FEDE96E3211DED5FB3532AA17B
+:10E23000A295D4B454607DC8E2ADF988FF715CFE4C
+:10E24000CE35FA0A3703BDED4D467AA3DF437FA0F2
+:10E250000E6AE046A15C32807EADDD29617E44AC71
+:10E260005F9B3F256175DE695C0793DFA03748A29D
+:10E27000DDC9F510E80BA2B16FD57411BA247DAADF
+:10E28000D50787E372F2F2F4E9AF417E8DE9AD4F35
+:10E29000A9BF70249DD10993FFBB59BEA99E34B27A
+:10E2A0007C1BD767F175717DF8A18EE9DF05C60D7E
+:10E2B000783D9E9E8FF35A4CA23CEF1433C0FCFA7B
+:10E2C000A3AFE3FDD097A0AB139CCEEA4E91C8D587
+:10E2D000F47B752B49A47E04BB268F40FDCEF4BC95
+:10E2E00089E979B85A2E41DF6BF5BC56AF6BF579E9
+:10E2F0008681E96D414F89F907B093C6AD0CEB58A3
+:10E300009C39DB86FBEB387E97A4F92E668EE9B14B
+:10E310000383C74C26CF4868FB498115E26715EB9C
+:10E32000B2212F40F500F06F1285D376888B71FFF4
+:10E33000E3EE6CB67E17AF93D22B7E5262053C752E
+:10E3400063BC20E624E8BF0BF86E4BA6EF8D82F786
+:10E35000185FC7DF3791164BC2FB95FBCCA8972EF1
+:10E36000BC908C753D54CFE4D9E978E9EF51BF8179
+:10E37000B6CFED4B463BE11CD71B0E1197216B101E
+:10E38000BFCE0C86E710A9CC82F83691A66481A88E
+:10E3900015F66CBDBDBF7C047F9EDF7D2BA33323B0
+:10E3A000EAEB0BF6E85DD0A6F3C13AECE40C36EFED
+:10E3B000E09E0925F742FD85DFEA65500D9480FD5A
+:10E3C00061D42DBF15E25E93742B63F7D075D4E74B
+:10E3D00058B1BEBB2AEFF7BF9B45DB1FEFD113231C
+:10E3E000E0FD899B0744E035C5E7EA8B4F1685F5CC
+:10E3F000AAFD834B76AADBF51DEA769024EC2FA4C8
+:10E400002058F1FB926B0E26D0495946B2E3C36106
+:10E41000C096C40BF5E944F79D01813EE4AEB87E99
+:10E42000B9CA7BCD413DD6F75D9DC1F8D900F6D183
+:10E430001CA0873EDEFB23E77BA3B1F114EC133075
+:10E44000BE68F436D1B7CC198149F07E831C3B04F9
+:10E45000F834E69D1D01FAB432EFAF9827BC701F67
+:10E46000F1027C2E982BD04EBAB0D9EC017FB13D91
+:10E47000D7CAE2322F496189F91553C750F95A8B2F
+:10E4800053A1EBDD74DDC76C530B31C9885FEA55CE
+:10E49000B9405EF9D0CFFB709AC5B69ABE57BB891A
+:10E4A000E9ED3AD29D0272E087803FA06BDD330632
+:10E4B00013FD677E8B6F68139DEF12BF05F733293D
+:10E4C0005F2B7EA0AF0760C804BF644E069307F5BC
+:10E4D000A6A8A102BEFFD779D5CE829E389E41CF95
+:10E4E000E2784A6749248BBEBA70C55CF4BFE2F992
+:10E4F000FACDAC8E6CE13D3578FFD5CD465CDF873B
+:10E50000FB25A4F30FB7B1F52FDC64F640BDFBB5D6
+:10E5100076E6BF2FA4EFF5BDFEC91FC3BA3EDA7A77
+:10E52000B717F2101F11F69D908DC5DB3EB2B1BA40
+:10E5300002E80BE37CB46720DA43B59B164DC5FABD
+:10E54000BE6D3A2FD823647F32C6B1166EFBDE6FE4
+:10E55000C6429C6CFAEDA500876BEDCBD3212E440F
+:10E56000FBF9C3CCBE6675D3A9E54F021F5EFBF570
+:10E5700084EE6BC1EEDA46F9249FED4B007BFFE0A1
+:10E58000B6C968DF2E9C66B1C3BA3C5B9F98047A1B
+:10E59000E8A3699932AE6797446C0007FB8A74B8A8
+:10E5A000BF5052FC7DD1537E860EE15A9167F546ED
+:10E5B000E0BDB775482794AF6E053D5CBF4D8FF643
+:10E5C000F3C1E9EFFE6E96A387AF16EADA6E1D97E8
+:10E5D000603F05B7DE20E88444CAC02F6330D1F223
+:10E5E00097316F6521CC47CB670B573716B2BCDC30
+:10E5F000E5F11BD9CAF8EDF10C89C56F2E9DDF7EC0
+:10E600007E39FC46B25355FAB7B75C0B613F91D7E0
+:10E61000307989EF092BE6AF7D1295BB6F6528F83D
+:10E62000FCAD0CBE8FEB4FCB76BE49E1332B23B054
+:10E630003F03EC28E22B013AF2C46C95B047CBCAF9
+:10E64000ED41B295D9DFE02700BE373AC993EB120E
+:10E65000E221DD196C1F21E5FF4330CEB977FE7A48
+:10E6600008F0D3907B7604CBEBFE11F3A0D62E9668
+:10E670003FB77A635857A077F891FE845C0F7A9978
+:10E68000DED1AE2BC3C5FCC2A02386E37CE6627C50
+:10E6900028F20A5B5658301EBCC51136B37847883D
+:10E6A000805E9A5AAE63F93F6EAFDDC0E3ACA6D28E
+:10E6B0005709E4FDC878566FF766E9AB4A1A6DFF53
+:10E6C000A67CA217F73996FEB4B500D63D5ECF9F63
+:10E6D0000F0CC1BAFFC35781CF97B9741EE0EBA9E5
+:10E6E000A5AC6E94D4A6601CE7CDD20F1CF312E645
+:10E6F000EF27268F95D2C974EA2C25D639DE38DE6D
+:10E70000ECB126D0D7676D5235B39B3D03660C67DD
+:10E71000711AD4C3A56A782C7319F0BB2FA6577C45
+:10E720000A70BEF61A868FD3BB8C61907FA7F9BEA4
+:10E73000A15E74E1E2F4F39D22551D82C3D0910BDA
+:10E74000FAF18CA47E6F71AB0EEB0016B54A244C27
+:10E75000BF77FAA9BDB920C73F7E626FEE9C84F9EE
+:10E7600068DF13578BF81E8F776AE3D7FDC5AD4579
+:10E77000BFF39B48C034B0A7FFF9DA3F63DC7A4EA1
+:10E78000178F7BFB7C831CE04FF1FEDAF146BB194F
+:10E790007D489D12C64D44DCF6C4E19F4286288E1A
+:10E7A0003F7357BE9C58272AAEE338DE6E06BCD1B5
+:10E7B000A5985B59BB3F7CF5C78FFFC1F58FC0DBC8
+:10E7C00089D68103008E8606AB42D8FEBD22B0F703
+:10E7D000B7118B17F8C990E9B282FC12E71F7C6968
+:10E7E000665787855EA9BD96935984EFDD2DFBB1F1
+:10E7F0001EF14BB90DF76FDEAD6BC43AF73217FB64
+:10E800005EB6CDBF7B01FA391D58F74E5AD5F04D93
+:10E810000728809EAA31A09E1270BE6ACE5DE8EFE6
+:10E82000F6819F4D403799E5EC5ED095CFEDE52818
+:10E83000E643CCE5C4067181E6B1219C8FC04F90C0
+:10E8400075275297847632D4EF24A562DE37C4AFA1
+:10E85000C49A4AE2799024EE1F134DDE838AAD10EC
+:10E86000F413F304310675400FDB3BDA0A59DE1866
+:10E87000ED4F1817EECF2956306F00FD0CA3BE9D4B
+:10E88000DEE274C9EB3BA78AFBB5963EF32C5361DD
+:10E890009F14ED9F43F520D87FC4AB57ED93DA4A20
+:10E8A000ED66F0EB441E5B277794B8D00FE98E42FB
+:10E8B0009CC55066F2805E4DD2751401DEB4796D50
+:10E8C000DA2F9FD55364DB41AF887D500D2B26F89E
+:10E8D000619F41DCCED8CFFCA3867B2AF0FE842E3C
+:10E8E000962708B61A711F67B053C2BC5C83DF104D
+:10E8F00036613CC4D304F80A513B0CFCCF763BABE9
+:10E90000036BBFCEE60D91C4B87AF4B17B31AE6E25
+:10E91000C57CE4DF9BA73D9F4C013032210F37C0FF
+:10E92000C4EB0D59DC3D9DD393C0BFE06791D74D3B
+:10E930002EF6E783C5FDE5C6D0AF2DCECBA87F214F
+:10E94000B73DF88DF52FE4A31BA0FEC504D63C7F90
+:10E950000ED3A27A33BEAFD1ECC1FC5DFC399C472B
+:10E9600061EA94F8FBED374C1C8475BBBC9E66D6FF
+:10E970007AA8C37FD84C54DF4B9C9FA2195F4FC726
+:10E98000B77A44FF7BAF9FA8601E9BB7DFFD21D401
+:10E99000FB3CAC578F872428F6619A7ABEB72E6B62
+:10E9A000C883EBC7F7E86FAACFF7BAC6F4E8F10758
+:10E9B000DE9DDA36D203FCF539D6410B7D1C74B0EE
+:10E9C0007A18ADDC3AE09284FD3B0954EC9A993513
+:10E9D000787E433C8FDD35CD07E758883C7670A5BF
+:10E9E0001FEBA141FFBB50FF9FFDF01580D2F4D378
+:10E9F00068FF07BF52585C89DA1112A543535705C7
+:10EA0000C64FA13C17F4A6C0FF62AE97C05607FAE6
+:10EA10000E6EBDED091D7D9EEBF6FD078ECBFD4014
+:10EA2000ED7C4FB9D8BE816051E5669007E47189ED
+:10EA300080DE5E57F419DA190D2F4C1C9358CFBFA6
+:10EA4000A8F311560FBE53DFE7FA4FB9983DDAF03D
+:10EA5000C27318173D1D66DB886A95F0DA71109F46
+:10EA6000A995C1D222A5E19A59A8FF67D275D075A0
+:10EA7000FD86DB25C19D3787607F4190FE05906D47
+:10EA8000F12F407B7FCB4C9315F248C1A2394B91BB
+:10EA90001F6C161FAC5F3BCF781EFC1E0BC62DD71C
+:10EAA00075EAABC16E2AA376D2AFE87C7352A75445
+:10EAB0007BA95CCAD2ED2EF9372BD40FF4AD87D7E2
+:10EAC00067323DDC22F943379562BD2749AC47CA1E
+:10EAD000EB64F6D84597411587BFE86276E2F850B7
+:10EAE000F704A0B997946812D8C541E2FB14FC5C06
+:10EAF000E2B77A601C380103EC2CC72A0FC6854D9B
+:10EB00008EE80F47A2DDA4A09F21FC88732FB038A8
+:10EB1000DA5277C0EA86F88E2EFAA39B006E3F6425
+:10EB2000FBAB89C2E44DEECDD65110F7323BA23F8C
+:10EB3000AAF6601D11C61F065CDD827878C9416C9B
+:10EB4000009F09A11A454AD033426E4C88EF637288
+:10EB500060BCB5928B97C1145B1F9A90445B2EA644
+:10EB6000F5D80587FF3A43819BC25E904D01F4675B
+:10EB7000AA6652FF10E8724DEC900CF17D4737DA2F
+:10EB80008BF51D127EA7BEE89758E7B784D793C5CB
+:10EB9000EBBA9428D6B915BA93785CAC85D103E961
+:10EBA00046FF973CC3E04FF526D6BFF5D8ED4DACF8
+:10EBB000EE888F67E079897A1EAFA180C2E7256E63
+:10EBC000116F5BCDF5AFA8D763DF258AA72C31BEC7
+:10EBD000B0711AD524382F4F0ACCB7D3EC1FE7A653
+:10EBE000EF9FA895595CBC35290C9B72374ADD3ED6
+:10EBF000885F864AFADE7F7413FFEE8003B149987E
+:10EC00003778A1BF7A6056FFBB79CC1558875FDA99
+:10EC1000F9E924A00F524D901FA9BCB8A47AE019BD
+:10EC2000800FE7FF43F5C05EC9B7835EE7BBEDEA3F
+:10EC30007A602FC397C8AB6AEB80CFB9230AABDBEE
+:10EC40008B3EF604E8DD4E23D6034EED7CFD18C462
+:10EC50002FA79A4807E69935F6C3C9B49B1B004F06
+:10EC6000E73FF9F0B1FB09D4913FEF65F5856A7B89
+:10EC7000A03FFB1F7323097E6248D0CD3FC9FE171A
+:10EC8000F23AC8FDA93352ECA14258DF7E9DADAFE8
+:10EC9000FD480FBA45DEB59F7A96AEBEEB5944DC0F
+:10ECA000B93A9AAFCA733D1AE783CBCB9B6D819C6F
+:10ECB000761F793385D7A92912131D24C7A0CA9BB3
+:10ECC00029F6C2FEF266117CFEDC107CFE40AFBC71
+:10ECD00019AB7768D99FE101FBBECE197BF2490FD2
+:10ECE0008C67C0715A5E480A433D7F0B877FDDA564
+:10ECF000E7CD7EE5EE236FB69DDB6F1F14C91103D0
+:10ED000085EB76C2E61FEA12F93319FDD8D88339AC
+:10ED100062FEF8FCFC83C3305E3457E4C55E62716A
+:10ED2000B4B93CFFF5C1F442AC67EB0FCE735BD5D1
+:10ED3000F985D7389C2F982B301E7FD7BF4FC3F84B
+:10ED4000D40288E30F84B8561B8FCBB3789EA79567
+:10ED50009D2BE0D929853D2C3F6392D136B4C970F3
+:10ED60007F0915A35B40F48628D55C496F4B146A74
+:10ED7000F4B9A785B6A9D1AFAC55422EDA6FFBB175
+:10ED8000248C9F3DE0F0E07C1F686179EAD07A290D
+:10ED90003C988D8BE7B5855A641F8CF30737D3F306
+:10EDA0005FBB0D7D9E0FD1A2E7F910FEBD26224765
+:10EDB000E02A4BECFA804DA9EECB7E10E3B5E81BC0
+:10EDC0004D1500EF1C762ECC05836F26C697530B8E
+:10EDD000F1FCA796E4C6D66AF61C79F68239E6C736
+:10EDE000E7572BCC20259E5498EF7B6E9E5FD3C0B7
+:10EDF000797E9BBAADCD1369F7BBCD258121EE811C
+:10EE0000BDF783BDC7F5DF8575F91C2F5ECC97B4C0
+:10EE1000E83DBFCD077A5FCBCE776ACA6670937341
+:10EE2000D8B5C05E85E7F0113BB7E3089B7FC1D53D
+:10EE30000E09F8A1C5CEE8F61F9DB776BEFACC4202
+:10EE4000065F3BE3D796B55298C18BCDFB52E322C8
+:10EE50000333FFB972F103C9FB64241FDF43B91008
+:10EE60007A508F7C778284B3587DA80DE5E61CEE3E
+:10EE7000E716677AF0FB5B6A0B52209F3AF7D41AC9
+:10EE80003CA769C2CD569C7FC34B66F4E3EA574664
+:10EE900073819EB57084D92A429ED2E7731C849DEB
+:10EEA000EFD3AACE0F6AF3BE6B53FDE3201FD450FD
+:10EEB000192D84BCD123F207BB5F67720DF56AC3BD
+:10EEC000CAD8931067FE6E6AA002FA9DBDE7DD49BD
+:10EED00092075F47F9767EFF10DCD739A745BDBFA3
+:10EEE0008DAC57E71F496B2AC6D549BBFA3EECC328
+:10EEF00052BDD72B1FC9EC9A8D86C050B03BAFBD19
+:10EF000086D55B7CB2482680CF4FCC84E7F9859CC0
+:10EF1000F51626EA81D9FDE295F60338F3FA57D1C2
+:10EF2000BF1EF04AF159C7F1FAC9735716025ECFF6
+:10EF3000EEBEB210F0BA51DFE603BE18981E980379
+:10EF4000F03839D18F76A1A8F7BD547A5B9AC9F50C
+:10EF5000E0BF480FFF407CFF32F530FC498C97BC86
+:10EF6000F45756971BEA62FB827BE274A7F17CB3ED
+:10EF7000F35FC912C8E1FEC6B371FBCE652221B0B2
+:10EF8000BFCA2AA3F85ED99F650276A0B07FB5F309
+:10EF9000DFC0F1BA23D377C105F8E571DD5A3EB67B
+:10EFA00029FC39B3B31F97306E6BF28452C6A15F50
+:10EFB000357FB40EE5CAAF70BF07E9926CE09F2CB5
+:10EFC0007ABC099F9FEB9C8BCF655324027E583DF2
+:10EFD0007D0EED35E3D5F5DBFA3D259144BF97CEA7
+:10EFE000E333F04B931C3103D06703D8D5748A0DFB
+:10EFF0000A8B6F373808C6554A3BD57EA2C8DB6EF0
+:10F00000F1B3F373B67449788E56BA21909F0D7898
+:10F01000D5E46F7F91E93B96E9ECC9BF373A7DBBF8
+:10F02000810E1D06928BF57A7AB11F51BD8FB3BF49
+:10F030003AB897057F7CABFD340BEDA42F881FED0C
+:10F04000A403107BC0BCFDAD685789FBBDEBE0C2DB
+:10F05000AA7CFD02BEDF7601DF6F0BF23EA291F7C4
+:10F0600089EDBA843AB8485FF50C09757089EF25C7
+:10F07000D6C1455472B28DEF07598679F220E59BCF
+:10F0800015A37AE8BA8EF03F9B621FE07EA09D46F2
+:10F090008CCFD5F1FADC60ED09F47B82B0BF88F14A
+:10F0A00037AB63E7E755D4517F12EB943BD475BC83
+:10F0B000E7FFC9FA45F4EB2FEEFE670D7F8B7589EC
+:10F0C00075D475498C1F35F3D4FAD1DAF8B9F083C9
+:10F0D0002F55CEA564FD6BE55C5696A0EF7F4CCE18
+:10F0E000F5CA430C8AA578FF0979888F3D6DE91030
+:10F0F0009A6C9518BD4ED2597D2CCFA9637510DA44
+:10F10000FCAF6712E63545DCD7F4BC2EBC3A1FFBDA
+:10F11000635EB77E7F32D625D47A6AD16ED7E63B5E
+:10F120001793DD9300055F9023B88FED1FAD2FA8D7
+:10F13000CC8AD717E45F667DC175599791EF7CD56E
+:10F14000FA795A20814E2A8BA90350DC7F1DD96D94
+:10F150009CEE92781D8A4909117BC2FBFDBD776741
+:10F16000168B1FBECAEB9F1E4E4EC2F3175C06B62F
+:10F170006FC325B33AAD5CB7BF266B0CE81586C7E5
+:10F180009FBC701B81BAC79FE83BF03C8450BDD543
+:10F190000BFA50C4ADC4F8BFE2F1D44BE59FBBFEFF
+:10F1A000C9FCF36D722324BE77A9F9BA4D14060980
+:10F1B0007CA5E583FEDEEB4FAE6CC8F2AFCF42B963
+:10F1C000E51B81798F4B944749A5545E83BEDF636D
+:10F1D000F480FF61E2FB8BC87AB7CA7F9FFB700E99
+:10F1E000EAC34FCCCC1F11FBA0C4FA1FEF17DE7F80
+:10F1F0009FBDF817A7FF4958CFC90A1FEE7B78209B
+:10F2000099E995D853ACCE48BB1F48AB4FC47E1686
+:10F21000F1BD4E21CFFE45F2F4B57F923CA5FA1523
+:10F22000ED8D7EF3BABDDE0FE177CB2ABB7D3CDFEF
+:10F2300085FB39C4BC82DDAC3EEF6D8E3F71FF595A
+:10F24000AE7733B37DBF033C9C7DC764823C6A6963
+:10F2500029939F0D7E2BE6211A3A585D4EC34A82B0
+:10F260007103B1EF775646200A72EA8177AD787E56
+:10F270006C43E7F6D602AC5708A09D78EE1D76DF0A
+:10F280009C113809E307574655F98EB28B9FAFA9F9
+:10F290002EC5F9A2DFEF30AAF75319B2993F2FAE6E
+:10F2A000BA6CA1B7A99F43DF3B5BCBEACA830E9F31
+:10F2B000AD02EB14583C3DC9D38D71F0863DA824B6
+:10F2C0000816B9C2F37BB3916E1AF65494E0F90BA9
+:10F2D0001DE6123C47E83D2BFA6B67EFC90C433C37
+:10F2E0007BA93BF017986F7269F83AB057F3E8774B
+:10F2F000209E7E76F77525185FD4F09DE0B7F83E26
+:10F30000DA3B4CE166A9871F37EA997E147AED0C47
+:10F3100018C74ECC7BB03AC3AE6964BEB5A76D7555
+:10F32000A8EB2F77644E3C03703E93A5F03C39CB9D
+:10F33000CBE79BA8375BD09B0EF3795E7E1AAFA715
+:10F340002021534F1D45C1B7E7E5C5FC445BE4E50B
+:10F3500093BE62767381CD807491DCCAE406A17499
+:10F3600001F6FAF858F704D8BF36A83D321EE0354A
+:10F3700000C00F312E12FDE148C87FA429E321FF10
+:10F38000F1D88A51074C0E8847755F0DA8F1B4D9A2
+:10F390002AC1559D95E12F82FA4AA2341601FD57E4
+:10F3A000BEAD67758F6B9350DFB7E7D661DDE3B90C
+:10F3B000778DAA7D46BDE43459ED82B85341EB7F89
+:10F3C00062FE21798FD4673DEB427022C6B0FE10F9
+:10F3D000C74A6EED0E95435CE641899DC149672F92
+:10F3E000B9209EA0C86077CCED64FBDFE7B6D92BCF
+:10F3F0004D284F2596BF19EF4039A9ACBD5E067F59
+:10F400004F692278DEDDEC6C76DEEDE0769B0C78E1
+:10F410007FF96B5D9F79B91BB27BEAE8005CF5C6AA
+:10F42000D821281D10F944513F27FCABB87CE5E7F3
+:10F43000C20B7DA4B5637BD9AF5C1FC5ED780D1DF4
+:10F44000F7F79EA06F41CF2FEB09DA612F4B26DC37
+:10F45000C726E8BA45EC2BF89AC585F3787DCE89A6
+:10F46000757F19C1CE8114F99830ABABD247D76400
+:10F4700021BCA2D78460DD7BEC724331C6D31A7005
+:10F480009CB5ECDCBABCD681ABCB4BE16A230082E5
+:10F4900013FB96E4015F86281D0CEE830E8AB35998
+:10F4A0001D94B23609F1A66CC013BA89624F47BCED
+:10F4B000298F30FC1466333A17F96011F7CCCC0E63
+:10F4C000ACCC1E93B0FF6C8585ED3FE3FBA4935756
+:10F4D000BCBB0BF6753DC6E3CF075E1A86BF9F71B6
+:10F4E00061AD22411CEA82BD260FFCBD07385E9348
+:10F4F000956E62B326D2E701ACBF2DD8CFEA0815CE
+:10F500007E0E96B2D6B11DE039362D8075C657B73E
+:10F5100044F0A7275EB29DC43C1FB58B70DFF8E9AD
+:10F5200017246117A9F4A1F0D7B47ED88FB3FF7761
+:10F53000FDAB27E372FA32FD2BA2F633E3FD85DF44
+:10F54000A8F52334EFF767FF105F485567F302C74C
+:10F55000BBD0EF995C368AFA9BF8BE6F1236C3FEB9
+:10F560008CC9504BCBD68375489B248B17EC246DEC
+:10F57000FD51BC2E88340E6175298D23D9791E8DDD
+:10F5800057C255D42799A13E25B10E3699D5179962
+:10F59000A13E85DE6FEE779FB8A709BEDF7E9F4D47
+:10F5A000EC136771FB6AC2F3163B701F79EC966C23
+:10F5B000DCF733A19AC50353FD0619E8F2F9BFE958
+:10F5C0007C207763946FC1BE4A1DE47383BD65A63A
+:10F5D000CFA1EE25BE4FBC86F4B94F5CD447897CE1
+:10F5E00071E6908D12E89F78DD4AB067FF387CB7EE
+:10F5F0007DA907E3CDF13AAAEF125C67A590332607
+:10F6000035FE527CAC5FCA4C03DA19E972E029CCB2
+:10F610000B6EE936037FEECE2E40BC359787F11C8A
+:10F62000E4D4E2368CE786D37CE7B29D3DF423E652
+:10F630004736B1F59F87FD6752CF77CF2FFA732EEC
+:10F64000D853955D4646879A796C899F5343BF434B
+:10F65000AFBA1C867FAFC6BE15575D8EA4AAE31352
+:10F66000DFEF6F9D821EBFCD6ED7D257A892E3E722
+:10F670007D7398D53FA9E9EBC0AAEAD127A92C3917
+:10F68000B8CA8FD7F366A94307754AE6D86C90804D
+:10F690006FE6B4DD08E7999C4F8EE5C2F9276FE766
+:10F6A000DE7513B69DB1F7A17D2AE769D61E1C7BD6
+:10F6B0000CCE43F95BCE889BE0BC93F3F0AD4C429B
+:10F6C000B2B615DC142A867D26D135DDA09F4A35D9
+:10F6D000F52E9A731BA02E13CF99B0327C66F0BA28
+:10F6E0005852C5ED77C854D176B3BBC40BF50C5650
+:10F6F000E2D9D30DCFB38DEC7C07C2EAB09A07E70D
+:10F70000B3BA094EEF249BC7B3493404F4DB9C6FB2
+:10F71000C7F7E3F27A8F91E7B1D8F78F3EC7F6BD0E
+:10F72000897A5F426C3960F7583D44D516E79E10E0
+:10F73000C59603E71C348B78216FFFC112B83A27B6
+:10F7400041FF1E9D787731FE8ECBF3F70E82F54E8A
+:10F7500036A8CFC116D79772197D9CE7E7456EB3DF
+:10F760000426C138C792664F82237867A65518ECE5
+:10F7700068A73DA50379E4E474619FC1E667AFF231
+:10F780004BF0FB29E2BC466740C1780009B4EB406E
+:10F790007F3A4FFAB1AEB0CE14CB55287D194D81CA
+:10F7A000E9399057AC397E17E615338FBE0F7520B7
+:10F7B00047F56D1352405FE4F3F333A8E317A2ED6E
+:10F7C000435979E8F7C5CF771D2CA17C983A83ED92
+:10F7D000A79D423A148CBFD8D8FEAE49A5F9DE6683
+:10F7E000FABDA9BC8E64D2317F0AC40126DD16554C
+:10F7F00058FE26A624D66D882B71E93D897C709D24
+:10F8000027A14DE05C6875FB06AFBA7D53F9D7437D
+:10F8100012DB0388AF1EE0F8A214C5FDD6A1B1C467
+:10F82000C6D6C5EA139FE67EDB301731E541FDA45D
+:10F83000430A815F306C6F26E665F696136CA7EF7E
+:10F8400034ED3025AE7F83CCF2BE3C6E2E7EFF09B8
+:10F850009E815E7DFE9D748457BA5546790A117566
+:10F86000A0B7B22C9305E4BB8ECB79B13F7D628A01
+:10F8700009CFED6D5ECA7E37427B6E69B3DEF60A54
+:10F88000E0B1F96338928AFAD9C986889C02F8A255
+:10F89000BE8FA3471E0BFA81F1AE01BA1FC37E9F34
+:10F8A0008B52F9A0C473E39B9D6CAECDF7293CDF6E
+:10F8B000C77E27A428FEBB2194ED687FB02909F2FA
+:10F8C00009CBB7E5887512C507FDDD44B4D97EAF15
+:10F8D00074DE16E7A51252A1E0F94492E8D784ED50
+:10F8E00047793FA9EBF53F017D0C4AA1EBA1D7D7A2
+:10F8F000723C48DC3F958F6E423AB1063C4027DEB1
+:10F90000A4BEF71F75E4303B62624AB90BE2EBCD4F
+:10F910006EAF0BEC2A011F715F8C2B9E8BEF79D39E
+:10F92000FA1EF7352EAF3BF83E68EDF3977364F59A
+:10F9300077F5745CEB377CD7A9FE6EFCBD9CBEDF0F
+:10F9400013F7457FFC59AF32E03306B729BC6E96FA
+:10F9500014A9EB5D48B9D7C4E4BDBABE65B2B4D250
+:10F960000DFC799DA9BE2B4ADF7F9DD3C96439F078
+:10F9700047C837BC3EBBF020F06735FC30011DE7BF
+:10F980007A125903C472BE22F013FB409417C78049
+:10F990008F1A748121A9B4FD89BE6DD0D27CE4AFE9
+:10F9A0007772C6F49E9FA0C3F83C29FD01DE05FDD9
+:10F9B00069E72DE880DCD8810582DB4804AF2EC2E0
+:10F9C000EAB2A9FE62F5D79E9C9E7551E29C646ADC
+:10F9D0001C04FAFDF5A610CA9FC9F61F611DDAF9CD
+:10F9E000BCC03998D7CC919FE2F942C45583F61632
+:10F9F0009DEFF97FE57CA18208EE0B3B50D87BBDE3
+:10FA0000EA913F36A8EA91C5FCB47C2CE61124ECBF
+:10FA1000DCA8095DDBD1BE0BCEB07A61DF4810EA0D
+:10FA20006C4B319F8675CBFBB85F169258FD702FDB
+:10FA30007BB1FFBA65764E41BD8D9D1F24CEA1FAE4
+:10FA40005E81385F88CD9BCA2F7EBE10B6DB6B3CD3
+:10FA5000E8FFC5EDC6F9CC0EBDB6D0D202E735F64B
+:10FA60003E6788C5F7C85EA387DB89A8BFDB93D94B
+:10FA7000773E31B33AF904394EA4F49EF3CF36EA17
+:10FA8000993DE8CDCD677941D95B06F8D802792B4D
+:10FA90005DEF38E4C0F4C0E85CDA6F7EB12F177E0A
+:10FAA0009A65AE81C519295D6DED26506ED7F8387F
+:10FAB0009C0B7A1D697C4B1E88743516FACF1CF698
+:10FAC000293B2FB487AEC6E53A99DC0421F86D7C5A
+:10FAD0007A322D3001C669B777BCD7500A794B23EB
+:10FAE000C25FD4336AF937613E27F56C3E0E381F8A
+:10FAF00099CEE7FABEE67329F49D48471984D1717F
+:10FB00007F740EFB069247F5D0F90012B81DBE1B9C
+:10FB1000A7F735DE56DDC03EE6ADB322DE6F9DC5EC
+:10FB2000F231C12466A7425EC69D0EF127F6FD5B49
+:10FB3000D732FAB8D56C447A99D6558FF91752C591
+:10FB4000F2295EFA1FCC6726F14D849F58B9D93649
+:10FB50000DF781CE98AACEB7CC344DC6FCCE2D84FD
+:10FB6000C5D36E9DA157FD7EA480C34CB2FE53A8A1
+:10FB70000F99A9F9DD482D5CB4F91A018FE6F26FEF
+:10FB8000E6FBFB72E3799D219799D769C945F97422
+:10FB900069799D83FA189E23F09A73E1D6A5942F74
+:10FBA00086FCB818CF5B9F98BEE8F10DB4FDB32D6D
+:10FBB0005760FBB5F43B961F85E78F1562BB4AFE85
+:10FBC0007436F04151D9AC29704EFD41331BC765E5
+:10FBD00009B4C3EF8EB846148C0297ACCA10C37E2A
+:10FBE000D78FAC1F0D75355516D63E52F25FA3B0B8
+:10FBF0005DC0DBA35EBC02DA07A54F67F795171A55
+:10FC0000562445E0F7C5AA5259FFA9A39ECA8438D5
+:10FC10004155256B0FF356AC1D08CFE5CF66F7A510
+:10FC20008F7FC9ED63616FF939BFEFF51D6F81FDFE
+:10FC3000667EABE4857D06FEF2E3EC5C3113AB4BF4
+:10FC4000F0FB4A143877B2D2C7E27B13AC4D6E900A
+:10FC50007F37060CA510C7B559F35BE07CE701E5DB
+:10FC6000156300DF13A81906FA8FF2D5F3C0CF335E
+:10FC7000AFFC343705ED10355F09BA9D26F8A94A67
+:10FC8000CD37541E74313CAAF9818EFB0A8E7B95C8
+:10FC90005A2FC5E5BB866FB5F4D8AFDE276A391891
+:10FCA000D74F6B3A902EB309DB4FB40DE894F1EFC8
+:10FCB0006F617E06B9DB03F7F324EF1558A8D18FE7
+:10FCC000FD20E607660F19D57B5EF04711F6229BF3
+:10FCD00081CD960EDF65CFE97B3EF83138312FFAC2
+:10FCE000FD13089F356C3EDBA446FEFB22CC2E178D
+:10FCF0007E6F83586FA77ABD6516B62FDE45A8DCE8
+:10FD0000C1D87DC915DF34EF20D7B3334CFE078D42
+:10FD100032FC4EE15CC4F36D24F41CD837EF58027A
+:10FD20007F84F9E8E4D0FEA804BF0FE2C37C32C5AB
+:10FD3000E3174CAE33BC887969E1D1D08F5CD5CE66
+:10FD40005B0B871EFC74A37DE6E6BF23185F9766F6
+:10FD50003DCDFC770462254655DDE9911A56572BB7
+:10FD6000E675442245A827250BE651E37127AD7CB3
+:10FD7000EB677F9CD0CF629E77F3FD595FCA4CEE54
+:10FD8000DDAD8BE03CF3AABBCD00C7F2BC02763EF2
+:10FD9000109F7F737908FB1964A9CF3C71799E2C61
+:10FDA000F260A4CF73DC3CF956E08B3B4DFCDC3AAF
+:10FDB0000D5D104DFEAC3F3A11F1BB4AEEB7C4F3F6
+:10FDC000A99A73E2E698FACE9B4914BE59A9BDF1EF
+:10FDD00020F2693768E374D7B1F8D50D3C4E37A1EE
+:10FDE0009AE127754532FA75A9A5471532BCE73C5B
+:10FDF0006B81AF0B8E40551EE635A263208EF0E678
+:10FE0000989F611E499C1BA9859F3F4F16F1C64BC9
+:10FE1000E297FEE6FF078B7F3A7CF713A91BCF839F
+:10FE20001BEDE6E79192403EF093DD965F01F1070E
+:10FE30002A772F5E0467141E51FCEE74066E87F756
+:10FE40006E23FE8950EB9D5A1DD0B3F83DC1F8F1E9
+:10FE500032EE474EE4FAFFB367D87EFD2ADFD04783
+:10FE6000C7837D7A584FC21EA81B67F0F96CAB0E92
+:10FE7000F5FEC23746BBC07EFF80D3E3904DB2EAA9
+:10FE8000770887862DAA733D86ED4C55B587776434
+:10FE9000AAFA8FEC2C503D2F895CA17A3EFAF0280B
+:10FEA000557B4CF73855FF2B8F55AADA63A3535473
+:10FEB000FDAF3A355DD5BE3A76BBFA5C9290AFBBEA
+:10FEC000281D7E3F81C1E3DAAFE6A8FA9F49997405
+:10FED00018F872DE7A56275E4196A8DE5FA2ABC3A1
+:10FEE000FA6BD2C6EC9C46FA1FDF17AF607D1AB5DD
+:10FEF000EFE1A701166E52DB41B55D1BD6802CEEFB
+:10FF0000751E86C6DED1DA37431C35706C3679240F
+:10FF10008FFFAEF895E44AFEBB345ABCE2F9029F6B
+:10FF2000BDA5433F63D91BCCFE5FB68BD5DF1592D1
+:10FF3000C10370DFD9611D094B70CE42E3C6F15297
+:10FF40008F9DA3858BD1A5C6B3D9A3C67352911A31
+:10FF5000CFC95E359E0794ABF16CF7A9F19C56AD05
+:10FF6000C6B3D3AFC673C64C359EDD01359EB36AAA
+:10FF7000D578CE6954E3396F851AAFF9A1C5AAE7E0
+:10FF800042AE0E6C5DA6BADF2C759451494AE6F973
+:10FF90006BF17C89C16DDFEF933E04FE43F43FC6F5
+:10FFA000CF8D58CFBF80E21FEAF9BF20EB0F414A47
+:10FFB000564B070D9D1B30EF76B974F0761EB75F78
+:10FFC00005FE2FD17EA5FAF2BDBC3168E7BC0FF269
+:10FFD00061E610EE97F8FBB67384DC4AB42B12FD91
+:10FFE000EEFEE4592F3DCAFDF07EF5A8C60F7F074F
+:10FFF000AA9FD05E5F8F71AF599CAE3F875B632134
+:020000022000DC
+:10000000EEFA2CDA07EFD08994D379BD03F31E0101
+:1000100076C2308C93DC41227A3C3F1C2A4675A87C
+:10002000BFB04EB386DAED709DCBED87F93C8E62A2
+:10003000340588C789F193BC74F86E7637EE33FBCC
+:10004000BF17F44F2B008000000000001F8B08003A
+:1000500000000000000BE57D097C94D5B5F8FDE6B5
+:100060009B2DC92499241012026126210B908449EA
+:100070005804451C9660D4806193C58833498090AC
+:100080008504D0D7B4A5CD40C2A28536B4A8A8A80F
+:100090000302050B345804D4688745A44F5B636B97
+:1000A000AD4BCB4B0045F618B4D23EDFF37FCEB953
+:1000B000F766E6FB480AF6BDF7FBF5F7FBE3EBBB9B
+:1000C000B9DFDDCF76CF3DE7DC3BECED38C612196A
+:1000D000FB06FFDD717DCA988FB1DE8CFD01FF84C8
+:1000E0007A231C455607E4275A1D0F3D069F8E189C
+:1000F0005879B30DFE28847E46436A2CCA9E96DD4D
+:100100005D3F2BA13163AF2A1E0F1B0EBD265A5D2A
+:10011000DB15C68624316B622C1427F853A64532B2
+:10012000D6C761A07AF04F61F18C0DB6D2DF6C4F6B
+:10013000DFE6A531A9F8973FB628FBDB8F9BEA7075
+:10014000273B4604EBDF68BD6673F3129C6747B537
+:10015000CDB5D5C9D87B5804ED9EBFCF1250A3189A
+:10016000BB62B2AD55A219FB2062DEF1DE0EC69E67
+:1001700009F764215C66CFBA6B35E69523718EA5CD
+:1001800030BF2BDEB6910CE66DB17A5C585E65F53A
+:100190000C8887255EEAEFC98856A1CF220E7FF82A
+:1001A00023BBA8DBF9F3F94C50F8F89F847B46E3B6
+:1001B0003A8E185A935D080F63EB486CC76CBDA963
+:1001C0009F4B660E979EE0303EA27F31AEABCC6275
+:1001D00071A9D0E77885E3F54CDC83F36AE0CFF9C9
+:1001E00086A2F880AA99F79D346FBB7740620AF423
+:1001F0006F12F3B6F6167077641545F63CEF06EC11
+:10020000BF17E47EA0F8B73B392E317FD017E37FCC
+:1002100014F216C3D5F7A643BE23DBE0DA0A459BEA
+:10022000C3A1EB3CC6DE11F07EC604F958FABE1637
+:10023000BF2784F3F6098F1BFC0DD0BE68FCCB846E
+:10024000A7E717DB683D5EE63033985F29739B7143
+:10025000FE9F8CFBCFD7DA001FF31D1E0FC2EDC12E
+:100260003843F27B340FCF90A9306F36E6E6E89F33
+:10027000B175063692B16976BE84F9026ED399DB08
+:1002800084E3CC641E138EFBFBCB663703FAF83D88
+:10029000E098C17C67311F7D9FC3FC94DECF025480
+:1002A000FF01D646F9772372FAD7C1FCA63E919199
+:1002B000C60C1AB8FF1BCE17E8E5C15E9C5ECEF6F1
+:1002C00041B86FEC7D53F43B55D00BF0EB0FB11FF1
+:1002D000E0D7E1B929217C3391D30B33DAD3FE1176
+:1002E000DFB47646E5B0A19877DB1261FD770A149A
+:1002F000DEE9AE2CC475E6AB36D60BE0DFEA50FD86
+:100300001618B3609CB72FAE0BFE45FA004F53DCB6
+:100310002A433CBFB902BE40BD3773553FD2C49497
+:100320004D93CE61FBC271D31BA361FD93BE6E1BC7
+:100330001E80B4A09FE9545B261FE31BF8DF976C77
+:10034000F3C41848EF4ED8676430FFBB076ACB0B85
+:10035000B3206F0DE6A73063B01CC63D8C7000FA69
+:10036000A9FB73EED86321ED186B52916FB63A2258
+:100370007B7D3A04B283D9E06F70DE6A71B4A71B4B
+:10038000FE91E957F5AEB1C78026EF51DCBB1C44A6
+:10039000170E33D27F8991B9BBE3BB8B698AA01F4B
+:1003A000C02EC8B37BC55C3B0BAF9AAFC07ADB1CD9
+:1003B0009EFDD8CFD2C99FCCC3F53123FBED308051
+:1003C000DBE2DF01DCA0FC543D403E03F8B3DECAB3
+:1003D000DC16C63EADB753FEB3FA044ACFD73B286E
+:1003E000BD589F49E597EB5D9467CEA2D7B0DF92E9
+:1003F000B59F1B3D598CAD099378E4F35826E878F6
+:100400004DFF917F72C1786BDE3651BEBCB9695227
+:1004100004A4CBFA9F5A1901DF97ED525CF8BDB2E4
+:10042000C56DB6211F1DF3AC46F259F876DB1414E6
+:100430003BD5D714E601169A3DB0E82D1C6FC41FBA
+:10044000CFC423FCCED68FA2F99CAB77D37CDC2D16
+:10045000EDC7E3A0FD85FA02CA273A8BDE45BA74E0
+:10046000B3CFCD587FF2EE76631294E7BB1537F227
+:10047000F75837F3FB017F9B4C7CBFD804FB05F298
+:10048000FBB8EC69CF3CC4509E7B3EC6F166C69675
+:10049000E6C7C1F729A3BC46AC37EB6BC6302FE9E2
+:1004A000FBC67CCDE1512DF072E97585E074E9C0A1
+:1004B000907B6F83FE5E3FA13215E6D579CD40F388
+:1004C000EAFC20DC0F3B5357BDA52FA5F661364C47
+:1004D00087F46159B83EE804D69DA9180D75C0FF90
+:1004E00017F67C2701E12FC7BD10DBFCD78F50DE4C
+:1004F000FD85CB3BC69A3F7D0AE561BF04D7A3903B
+:10050000BB6C62B3893F596D04EE878BCDCCC3F3CE
+:100510009E2198BF10CE1E2C82FCC8BD49E3917F5E
+:10052000703C4746509EA5EF7D22E5FB8EE0783B70
+:10053000F63CD9F98A03CBFDC4CFBBF63ED3F769AD
+:10054000C855ED5B158EF37A15D6320AF8E3D50D52
+:100550001124B75E35B94ED6A1BC7EC6E6DA0EF5DB
+:100560007EFEE3EF9E3A84E9FAEABCEF421AE38C9E
+:10057000A57ECA7EBA6830B687FD9B25C23A7F71D8
+:10058000500984E53096BDF1F0CA44186FE8E6766C
+:10059000435F4873B7290D980EE95F7002F7CD3EAF
+:1005A0004E07C17DD86EA79A846CD7D7FFD11DB4F2
+:1005B000AF6BF7FBAC8D9F8FEFCB82FBFE60A5F995
+:1005C000FC0A27D2EBFB791E824713CDE3A596E9FF
+:1005D0007FB89FE13A40A3C0797BCD2EDA6760B93E
+:1005E00026C85FDA9FBAE55158E301836F0BED43EC
+:1005F000255CEFB854E47B12E9A51AEAFB205F9D65
+:10060000EB8BBA15CAABFF32D00594C1FA3F7B67BA
+:1006100001C263F1FEC726F5857A97C6309702536B
+:100620002F7FE9EA246CC7FA3386AC7D697F43FCEF
+:100630005C68F7A3ACF123904E8AD4661A87D5F094
+:10064000719E10FB176B03E0C40B92837A3F82CF3D
+:10065000F83DB625E670120BE2A7A66585D308ED36
+:10066000877BAC2E15E9DFE94BACB505F743D8C75E
+:10067000463B91B4CDA25FFBF4E4A26FB18F99C564
+:10068000BE24FB7BC2CC7C61D04F7FF8AEE03E6BDA
+:10069000E6FBEF76900F48BF72FF8571EF728EA078
+:1006A000F66E94A749B0D9E6C23C939EB0903CBF89
+:1006B000D9F1A5DE5413CEE591D43F66C735BCD63B
+:1006C00006EB3D1EEE9989E3CC17FB3733BA1C28A5
+:1006D000A7F784BBEF73D27ED8918C6B80FD712E0F
+:1006E000E617ABA04FA586E853D69BDB1F3F0C77E0
+:1006F0007BB0FDCDD6D7CBCD655F1A582ED0C1B219
+:10070000C72C7E06F36E40F90AEB6A881C694539EE
+:10071000C08E19AA8EC37E793B6FD9D5DFB2C83C93
+:1007200092130D8C750BAFD7819F3D203F0220EFB8
+:100730003DC0D763AF75A89CDE5B8F460F4779C974
+:10074000DC91403F775C33304FC87EA6EF07F05511
+:100750008FEB1BC7229827647F74B31833F22DB335
+:10076000C5FE73EB16F31F23F037A6F38308947FBF
+:10077000CBBECC2339D8D3BA5E13EBFA35AE0BD24D
+:100780004FD28A36201DDFFE85DD88EBBBDD383594
+:1007900019F51398F71338EFB15F18B4F3FE3A5C0C
+:1007A00093BFD9F93FAC309F01F9F173B31FF9B191
+:1007B00005B7398063CBA22C3FF2FD0133CFFBA2FA
+:1007C000CCA49FB644321FCA9196A9F17E9F13E52F
+:1007D00021E3FA6B6FC6CBC344FB39F1D4BEAF053E
+:1007E000408AF2E0FE70D17FED5BD958BE2289E4E9
+:1007F0004883C9BF3605FBFF81EADA0E78FBC06F7C
+:10080000F099804E36C604EE57A1DF8D9FC7331C8A
+:10081000E7031648AAC171CAC349EEDE66303C3808
+:10082000D586F5DC89B100EF03FFAD92DCDF980BD4
+:10083000791BC9EDD9CDF07DE354776238F63335B5
+:10084000DE40F351592D7D77F2761F9978BDB902BC
+:100850005F1F0AFC005F13DF7BA64418916E4F3ABE
+:100860004BDE7512BEDD890ACCF7A9B234867273ED
+:100870006EC55D4EA297A627487ECD163890FD61C5
+:1008800003EB48D47FF9BF39F3B787213E679687DA
+:10089000B5C30EC93E285F19E980F6333D6AC00230
+:1008A000F294CDC87777E9672938AE9BC6AD6E1E46
+:1008B000947A26849E4B2C2027A0FF43619E0F88AC
+:1008C0004F0FE552F921504EBE017E3A5596B617AC
+:1008D000F98A95C9F35FA014F1F07A8795F4CD9E5B
+:1008E000E8A101E13F54D029E26539C73BE85D94B6
+:1008F0006F983D98CE25CF9938DDF8F685115E0BBF
+:10090000A65909CF9DB3C3B758A0FC4121B71A66B9
+:1009100087BB15A8D7F092C56F70D27987EAF95EC8
+:100920008BA47EABCC3C5FF5621AD1D301B37FD7E9
+:100930000E2C7F3D8CE8A12A8A8F5BF54A92A03766
+:10094000B773158EFB9A85E8A02ADC114DE5FF1ED2
+:10095000477432D9EAF91BC20BE8AE16F5822A7346
+:10096000203D06E07B52D0D5496883F8F3D546D2C6
+:10097000BC89E521EF69E8BF15F1E931F372F63D75
+:1009800095CA4FDAF9F827D7F1F18B7F52F9360380
+:10099000BC9D2C9A94381FE671B23682F4BF3FD7C3
+:1009A000A90173149E5F3A1E4F877A97979F1EB9CD
+:1009B00009E6DFB6F2E364A48FE295D585D8AEB838
+:1009C00062F914DC377BE2CBE22A60FE103E4E492E
+:1009D00071C7A4C07AC6A6787A615A93D5B600F5D5
+:1009E000E0CBE6D667F11C9114E7E983DFAFBC7C6E
+:1009F0007607D78F3BD2713F586CE4F421F7D51AB4
+:100A0000417FC7533CFD53709F080FCCC3FD232289
+:100A1000AB95CBBBE53727E7CFB76C3FA0C0389588
+:100A2000E12D8B2955FD39D8CF052510A5A412FC41
+:100A30003CC84F17ED812884BBC7C0F5B3CA9DDA07
+:100A400075E13F23CCAB12FF807695CDAA3B0C71AC
+:100A5000CDFC669C7F253307EB3B8378827E084F75
+:100A6000CCF6E779DF07F857EC1A9487E780CA9845
+:100A7000433FBE8DEA413BC927EAF579B99EEBE7D2
+:100A8000C3D77751D0FF4549FFB3CDF25C4EE35F4A
+:100A90007EB90F8D7F61AA3F1DE17F5911F576590F
+:100AA000783DA00623CEF3979C9E1E37F90CE17487
+:100AB000BE6744CF9571CD23112E520EC11C7C060A
+:100AC000A87F616F12D597728B153186ED2AF726B4
+:100AD0006EE5FA993897E244A17EC52F78FF9847D2
+:100AE0003E3CFF4292188FEBC77AFCE9D75B9C62D1
+:100AF000A0F53E2EE577A4E47357C254807FC62646
+:100B0000B3A6FEE548F3836EE877905FFB5DF65F82
+:100B10009EA2907E364087B7BE6AC7610BF2D3F3C0
+:100B20008CF8553FAF9A147EFE7BE1852E3CA91CC4
+:100B30006FA0064AFA70703DDC8470FEB00B1F0F88
+:100B400025815CAD4418A404E17320D79384F2FF9F
+:100B500032E6715F88817C16EA411CDE322FE1ACFF
+:100B6000A7B3951F2E486A83F64F09F80042FB2071
+:100B70003D76E92F26385F64E1B9B27CD899343CE0
+:100B80006FD60E82ADA06B3D0B36E55A919F166E67
+:100B9000CEB59684E0A161E7B0130E80F3C59D4603
+:100BA000178AE506A3FFC7A84F37EC549B7D8CCA74
+:100BB000AD08DF8BB623BFC37A0B36C7E4A1BE2CCA
+:100BC000DB2FDCF4F0A0B210B80FD9A9C54376B37F
+:100BD000363FF49036BF0D6543EF6FDF2E37A0CD63
+:100BE0000F3BA1CDB30EC016E041B5723C1D1CE514
+:100BF0003AE1003C0DF0AB2EFC34C0366DFA64D403
+:100C00002F36ABAE34281FB0BCE89E6CC87FB679D7
+:100C1000BE0BD15CAEFA167F1F7058FEF1A413B85C
+:100C20001F5E60CDEF4F063C2C68D960363A70DD10
+:100C30005ABA3D6010F4FA02B7972DF26BCBAFE7CA
+:100C4000EB15D25E9A194A4F7ABCC3B8F7B9614224
+:100C50005575CB869D812DB3BC10081D6036BA79C1
+:100C60008319F5B61B8FE3E3F462733B101EDE516C
+:100C7000BCECD6BA09ECF430F863DDBB9370DEDE71
+:100C80001F29A437787F95710CF781F67D73EEA646
+:100C9000F4BE025ABFB4CB2D6C51029190B78F7243
+:100CA0001C6A8376F3FD8A0BE75DD26809CA33F8C4
+:100CB0005FD93ADD3C368694C3FC171E3AFC3705F3
+:100CC000FA2FDFAC6DB708E42CCAAF8A6DDF58424B
+:100CD000BFCB73E3AD2D5B545CF77C397FDF588667
+:100CE000EBBA955765BD847E730633B06FD4F62E8C
+:100CF0003A8BFBCAAD1B793B10975E5C6FB5CDECB0
+:100D0000C0F5565B592002E67122D2ECB6C3F7ABB0
+:100D10009B22C91EB6C002FA641EA52C2C0FDBB99B
+:100D2000A2B1DDA7EF70BB58751CC777F5730A9D9C
+:100D3000A3AAD18889F9E7797E110BD03A904EDCCD
+:100D4000A1EBF36BF3AC899FBFAA8C81C3088F0A18
+:100D5000D6C6CF4F8047B7841FC0AB0AD6F9412C07
+:100D6000EA5BBAF6CCE5C1716B6C5C7FAA39F48D95
+:100D700025B45C9E03E53955DA699F4B2F0AC7718C
+:100D80005629EE27AD30CF5542BFF66D0823FA9DA8
+:100D9000BB85EF37A0C7A6235C366E4874A19E3191
+:100DA00017F4F230E49B45E1540FF45DB2AF748068
+:100DB0005E8DF6F68D31CD01DC37363EE6243D1AE8
+:100DC000F45F824BC7FA30FF5605F560AEC76CDCA6
+:100DD00090417AF8AB729F5ACFF5AE6EF4622A67F3
+:100DE0007DB81EFF112E25440F4E8DF7A4A586ACAD
+:100DF000AB6CA53B11F79DB2696603DA9D58F9CD3E
+:100E0000F90DB60B3DB203D68FEB38A3141D378412
+:100E1000E8A32353F93E3272BC7B87A847FE853294
+:100E2000C3D447EFC0F11E373870BC2E78BBDDE964
+:100E3000388F331BC2F290CE468EE7F69F93B95C93
+:100E4000BE470C676E3FA477887EEF483568D28432
+:100E500070A03FE8E74C3EB73B470E2F227B1BECD0
+:100E6000D524E7F5EBB847F453662EFAF7DBBB99C8
+:100E70008F840F9BC8F585334B94AD7C5E805FC833
+:100E80008FFC6918D9E9CE88FD47C219E86604D9F4
+:100E9000DB85BCDA20E8658389D3816F113F3F058C
+:100EA000E985113D6C14E7ACB902BF6C3DD76B818D
+:100EB0005E389CD7270A7A61ECEF480FF90EAE67CF
+:100EC000DFE47909F05E9ADAFBFA7393C43733FAF8
+:100ED00047FC23FF46F5C13D077CB07F56FCF2B1CD
+:100EE0002806F5CE199BE25DD0BE6AFBAA2837A47E
+:100EF0009F197D517618FF9C5F2DF077036FBF809F
+:100F000037DAD715903F8BF14F07EA3B3F9A82EBD8
+:100F1000FBEB76931D4542CD4E0B9D9F16EF5F4434
+:100F20007A36E4DB797ECDE72AE60F69EDE0153FFE
+:100F30007F2CDE41F0F6251912300D243148176F51
+:100F400033B902685F7E4F75C130A03777ACC6F900
+:100F5000E9DBE33CAE01BE6B9A55AF39FAFAF21AFF
+:100F6000215F6AF6FFE873B4EBD5E8ECEEE5C2FF6B
+:100F7000A0B7BB37A546F6FA140DCCB7B05B500F3F
+:100F800002B8B802C8B7309F3422136EB76DD8F5D7
+:100F9000444E3BEA0BDBDE8A52B2827677E997E871
+:100FA0006C2E7D0EED9A3DF1E36561870DE28BCBF2
+:100FB0002DC7210565001CD0795A650A44DD06F06D
+:100FC000A8DA62223953B5E7F91D4F219D7D68A14A
+:100FD000FDBC72CF1BEFDF8AFAEE3E53AF42BE0C70
+:100FE0009B121FC4538D83DBC9245E2A7EF586D9EC
+:100FF00091CDBF2F8F0DE2A772DF6133CBBE1E8E66
+:10100000139A0F9BDB6CDDE0A9B97D12D989767D3F
+:1010100065463E38F7BAC2FA38AF6F5FBEE58D2835
+:10102000D4C7104EB82F497C75E14F571FFA9FF275
+:10103000CA70AA67C773454FF85B827B07D17724D4
+:101040008B81F1CB3FB2F80B11AF7B9745E13ACEE4
+:101050001A6B399D3FB32A1EF5BA72932FDE4E29C3
+:10106000FF5EFEECC3447F0B95DA787B16D177A246
+:101070008174065F22AE6FFEE699B4BE05CC43F4E0
+:1010800057FE8C5AE487F44B232BD8D70D9FF41DC1
+:10109000C8F9E4EC56402AACEF2CDA6D506EFC5ED9
+:1010A00015E7DC25B47F3F2CD6CAD852CA7F29F475
+:1010B000B64BA95D7E656BE879B166DB9A56C4CF05
+:1010C000F9FEEE3E384F80834FC04BF906FA55DFEC
+:1010D000CDEFC3F1C31CC691A21DECA313F03BD608
+:1010E0006F35B9D1EE1DD24E9CE7F8F80F89F1614A
+:1010F000DEE1785E3D1BCFF576FDFA0A062AD2DEE8
+:10110000D6CA42E9AB27BEDFF608D1D517EF71B9D1
+:10111000B2D83FB580CA5B4D813E58EE3F3C43217B
+:10112000B9606181EEF87A9B49F0B5B61CE6695466
+:1011300042E1FB3AD7431780DE1508E1E320DD9852
+:1011400083DF69DD3F15EB6823BF98F4A72D14F208
+:1011500040BF6EBD7CE83550F8E3847C90EDD9E665
+:10116000EEFD3941B9E0A371AB603F413DA3EA43D5
+:101170000BED1B557B4C45089F0BBB8FBE3F17CF1C
+:10118000A1CD928FB5F256CFC7E52F8EE8968F2F5F
+:10119000ACCBED9E8FE17BB77CBC4E21F9F63F9541
+:1011A000B7B0D391DDA0277E5DD883BC1D3B502B0B
+:1011B0006FBF6459D1B761A1DD3B80F0A383AB84DD
+:1011C000A75E7EBE9FEA20F8EAE527C3D0881038E4
+:1011D0004AF849FA64CC43E374D1B1A45349C75DDA
+:1011E00074AA5FAF168EFA72C34046F3297AD9C447
+:1011F000ED672D0AE9DBD0EE78D270E253376D7FD0
+:10120000ACE97852AFD0BC5F976FD6D577EBF2459B
+:10121000BAFA1E5DBE5653BFEAD051333F1F0434A5
+:10122000F52C75F7D039E37A3DC2CFFD3EFB3F3751
+:10123000FB902EFA7598512E9A56325F24EABBAF76
+:10124000A9A4EF5E717444A15EB22A8CEB6D57ECD9
+:10125000221FC3F31DBDCDAB512ECAEF1D61DC4E65
+:1012600072A5A8232A26E49CDEDEA246A13DB6CDC7
+:10127000CF0ABA8F136920B8B6B19ECAB9FE96AF2D
+:10128000DA92EBD01EDAA4BA804C58D98A5951149C
+:10129000BFD0927AEF6CF83EFF372A85015C09E7F0
+:1012A0007605E6731B317EA094A3907DC67C8F8F5C
+:1012B000817595B6F03882B2755AFC2EB0CD880E85
+:1012C0003850EE68FDFD0BF15C978AE73DEDF70ABB
+:1012D000B68EE8AD42C7171E61A7D5F3C516C9176C
+:1012E000B92C57D863C8CFB154C8EB7C35EBDED9E5
+:1012F00000FF2B275466817C678BCA56E37A772BD5
+:10130000E4EF418700F2DB62E04B9C8F84CF45E441
+:101310009B8C9EF5928B2FFD65E4F7914E0E7C9C85
+:10132000837ED88B073E4C7F15F307FF94FC31BBBF
+:10133000BEFE84D7FF360FE5F095D72D0CE9FBCA2A
+:10134000EB6F26A35DF0CA2B163A2F5F5969E1F6C1
+:10135000E6D723FDE88FBCD29FEBB90DAF7D95D3C7
+:1013600046FB6E23E1EBED8166AE37B5FCE749B491
+:101370005777B6C0AA509F783D82F8A7E69530F21D
+:101380006B5F79EDAB91A1F10FFFD3F548FFF595B8
+:101390004836FB45A45BA1D7D7BC3AFA79F4E756A7
+:1013A000EF3F6C2E85F209BFFEAF1C949F575EE4A1
+:1013B0007AD26553DBB3686BFCD3C0393F3525A2C5
+:1013C0007D0E3AEB0BDC96F6E434E493EBE1C2E1FC
+:1013D0007005E080EB02B894A3DCEF091E97FF656F
+:1013E000E1F1F93C2ECF6E61E8FF0DC245E17E844C
+:1013F0009648BF55A1F5F3EFAF7F9583F2E646EB34
+:10140000B5A59989AFFF7F59EFE0B47F55FC727A9B
+:101410007F71A083C7F5E9E8FE7ABA3EF86F94DFE2
+:101420001BE9A2F9DE24BFDFFD2FBBFEFF1B7C976B
+:10143000FFCBAEF746F8FE8DC077A41DFD8A575E40
+:10144000FBAF64F62DD6BDE65F96AFFFF1BAA5BE41
+:101450003E5E759DC885FA6FB1E6F75C4ED23EBA26
+:10146000D53BF6A7493B093F1F4D607C9F9E60AD71
+:10147000247D7342BFF5A41737B03CF243F8FAA9B4
+:10148000E48FA1E00B80C39B09B97EF2271903FD0D
+:1014900096417E7C5235C55BE9CF8D13C22717A0DC
+:1014A0003E7A7405CC0BFA391A69B0A3AF78623F63
+:1014B0003560C9A1B41DD3E3C9F79C40BD65A24DF9
+:1014C0007B7EBA47771EBACBA12D2F602FF642FF45
+:1014D00059419689F9613E93B07EC8B9F1A7697602
+:1014E00082CB5DACA9D16EFBF6703A23E0743D1C53
+:1014F000FE31DCAE839338271B457D3DDC8CB6473F
+:101500005BB19D91C1B997AF97CECBF2DC7B2378CD
+:1015100032719E368AA1257C8DFDB89F34A45F82EE
+:101520008B84FBB785B7C4931EEE12BE126E7A3C55
+:101530001C446354EF20FCFB19738DC877B70B3D37
+:101540007EA23186E7FBB5AA45C48F7E82FB842F3D
+:101550005C46D44FC6D96228EE9239FAC7E07916B4
+:1015600055CC6F92182B1915335281F5261999CF46
+:1015700002E74DF4A1911DF511A37FA513C7E1F674
+:10158000DAFE466E9706EEF685E7517DB719F2DE74
+:101590009F2D646EA8EF4D622E85D767D1B1148E52
+:1015A000C6548CCB8214DB79A379BFDE3ECCBF92CC
+:1015B000E393F082C726B45F40BF6E432C6F1F9544
+:1015C00047ED7D06DEDE6D8474402AB7AF77ACB29E
+:1015D000D0F9C3BBA67F3ACA8FC2F15ABB71713A28
+:1015E000B7ABC8F4CD74CEEFAAC195807A7149E348
+:1015F000203A0FA9E145D52FA1BD7F6F04D1A37774
+:10160000F5039347E0FCF6C6B9707AE7A7EC1BC96F
+:10161000EBCF79F88FF0DDB3338CBE5F48F7F44938
+:10162000877ECF2B8E792FC187929947CD09308441
+:10163000A779EA25B4FF4DF1EDFB1DFA19A7CC50AF
+:10164000A9FE14C6E32B596304F9A327FB3E3726F2
+:10165000407F93E1B081E5ED61F6E425307FAFB0E6
+:10166000F7A6A673BB8B1ACE3C2FDA705EFDD35360
+:10167000E0FB64D67D3CAF57D61FAF6C46FFD080F1
+:1016800009DC1E2FEB633FD8EFC274EE5FCD117003
+:101690009179802BD52F5B6B694FC573CF5A53203F
+:1016A00003D26732C7E7A54379610A9BB409E1FE1B
+:1016B0005D956DA5F97678C9CE1D99E9403C788095
+:1016C000A429BEB0C9E940BB57FBB8E600FA07DA67
+:1016D0009F74BA1A1C84658AC791E7ACF671818140
+:1016E0006897EFC8E57E8693F6B6483C1F96DAAC5D
+:1016F000149F23E37AE6DB399F0F68685B7F0B9EBC
+:101700003B1F535D5B213FFF31EE77F9C466F52B3C
+:10171000785EDBC8F994ADD3C6F130BB8BEC3DA548
+:101720004DE3CC78BE2CB3B9CDB8CE8A0C4F11AEF8
+:101730008B7D0DF01B89719C8C98C1DBE4A538135F
+:10174000350AF80EF9C4E888C273AF3E0EA846C445
+:10175000FDC8FCA130CF1CECAF24DAB117E9E55489
+:101760005D2AD93D3709BA2BC43846F44F18DB122D
+:10177000713EE1F81DE05F186B4FB7113D87318472
+:1017800043BBC99E8EF4DDBE2ACC807EB6C2959C3A
+:10179000AE81CFAC4668FF889185A3DF2043B42F8C
+:1017A0005E612CDA02F97E56668C8C45BACA25BA7F
+:1017B0006ECBF4E4207D7EF603360AE9A174DD06E3
+:1017C000F2AF48BA60C6D6897130CE67DB9D792802
+:1017D00037251DB5658EAF4D0FA587190AD101A418
+:1017E0008753891EA63D8CFD168E0F0C5C9A85E7EB
+:1017F000D12AE6C6FD3D81B9504FE8641DE47FEC77
+:10180000B4991D68E792F244CA0DC0ABDB1A1FA45D
+:10181000831DB0DF1B4D8CEDACB752FA42BD9D1954
+:1018200041C6EDAE4FA0FCDE7A07A5CDF599F4FDDB
+:10183000C57A17E5F7D78FA2FC817A37E50FD51760
+:1018400050FA4A7D117D977209E0427248CA152903
+:101850008F4A6DE676F4474AB9A4A79B7900DEB1BA
+:1018600079D49EE49E9477B80E435E501E49FCA640
+:101870002845BE0427CAB1B63988FF7CF5E29E83AD
+:10188000782E2FB7B9E89CCEB8DCEB047A45B824A3
+:101890009BD921B4BB362C71B7AF7106E17F7FB9FC
+:1018A000C28C2174F5406D183386EC1B0FD6C568C9
+:1018B000F2C5757F78A30FF45FD1CBB30BF176F24D
+:1018C000879F3EF327F8FEDC0FCFA721BE611EDB0A
+:1018D0009FC071978777CD2316F38D26F2470D9021
+:1018E0007610F8877829619CDF9EFBE1DF89BFDBFA
+:1018F000EB2C0ED4873F423C015CFF2CF054526726
+:1019000021F879579DDE7310F97CB999E45C49A3FD
+:10191000E0C3B500CF10FFEEA94446F608D0A659A3
+:101920001DC0EDD40FCC8108E8FF94C2F95701A582
+:10193000A018E3FED6BEF901F2BF527782FCE71E83
+:10194000AB8DEE35319FE962687F4ADD71AAC7DA57
+:10195000FAC5A0BD84F6B13BD0EFE8363B60DD4868
+:10196000D388B792CC232C11FD264D8A1DFD266508
+:10197000E27BD95A85FC9318773303F4BE77D355AD
+:10198000C26364BA91D2CA7426F4BA26DA9F24BD1F
+:1019900096AD8376C8174DB9E6052172B8447C2F01
+:1019A000CD34502ABFB78B7EFBAECD9D8DFA445F00
+:1019B0002CCFC2346F36C2B7AF6D925109C1FFC789
+:1019C00038FE089C071FBF12910AFFF768668A79E4
+:1019D0007E16E287EF5F729C92CCBCD518C759B2D5
+:1019E0006E1C4A5FD6607225F4827A67BAFAE17A91
+:1019F0001BB3F278E5AA1EF60F693FFB0CFF1C4DE6
+:101A0000EB26BB6EC5DE5FEC7D057AAEF8D842F8FA
+:101A1000AD182AE2A7B2FC23A793A1516BAF9EF8A1
+:101A20008BBF4491FF613F8FAB8494DB53979773D7
+:101A3000FBAB0BF8AA1BFFCFB1BD1F47756BA7DE31
+:101A4000AFDE949DBA46F93A0AF507B99EFCD7BEB7
+:101A50008CA77928D7C8FF53F3DAAAF8EEEECFE8BF
+:101A6000EDD55DF66C61B7D397EBED757D32747E85
+:101A70000123A3FB58D25EC7D4AC68B4EF7F29EE34
+:101A80006BF474AE91F6ED9A4DD0491CF0A7D111CC
+:101A90008DFEAA2B3DE8D30F66F0FDFE92B0875F66
+:101AA000D9ADD239E7CAEE48E2A7C5BB7F761CFDA7
+:101AB000878BB729348D6AD64A700378326BE83E3B
+:101AC00086F16671D7CFBBD39F168DFB48E52F22D9
+:101AD0006B91CE16352BEEED309F4EAB23BA77C807
+:101AE0007C6ECBE0745669691E497016F3CFCD70D9
+:101AF000D077596F51CBCFC87E0CF52E931EF4CB07
+:101B000008F4F523BC7F87F3BCB079980BFD7E8B7E
+:101B10009AF72D263D6277841D8F0CE7459CB0EC2B
+:101B2000E7CE0CCE9F776670BDE582F0075DD8AB3F
+:101B3000923CC379227F9D57B4F1789345BBC9028B
+:101B40006E9F0BFE92F51735B7470D84FA670FFDB0
+:101B500081D259625D8B6CAD39B8FF9EDD1F41FEAD
+:101B6000ACB3FB9F9EF42A8C77A9795C2FE407D94C
+:101B7000FFFC0C13D5BFB4592D4078313F8F7BA9A2
+:101B800046F80E0B9D67DC169F3394EF78DCCF850B
+:101B9000FDBF8A326405F1596DF558F15E63CD7E63
+:101BA0006F11CA8DCF140E4FD3FE713EBC8F54D32C
+:101BB00092CB909E89EF12A9FE5A43483DB3C94586
+:101BC00042D17868AA3B89E02CEE13897879BC1F52
+:101BD00087F267E9542BF927E60D75CCBA1FE5E4C7
+:101BE0005B268E977E8E27507F9BF74E1CC54D2D12
+:101BF000753A66E1FC97BDAB52BCEFBC61420E2466
+:101C0000B48DC0B8C5AAB50A73C33ADB9D5C6FA892
+:101C1000F2ABCC03F9BE400F3E00C5FA8C14214F45
+:101C200003E978AFEFA97283DB0CFBDF4933F3A93B
+:101C300068377A91C73357A5F0B8E1A790EE21AD88
+:101C40008A0DA4C7417F17053EABA605D2314EA22F
+:101C5000EAC5448A93B868E67E4BFC8E7ED2AA3CE5
+:101C6000680FF57A8978586C1F13423F55252E0767
+:101C7000D653635D8E5C1BCED77E99F4D89722191C
+:101C8000EAB18683913CCEE9E7615B2D2178DA9257
+:101C9000C1F5E55E028F6C2E8F877C5CC4633FBE0E
+:101CA0003DD18FE73759FF7193670EC201D781FA93
+:101CB000FB2273533AEAB772BE8BA29A689E17054D
+:101CC0007D2F0A6FE2F1D2E29E2CD6C77CBB8951F0
+:101CD0001C77C72E0BC5939C4F6C3D80E39FDF356F
+:101CE00088E1FADB9DFE0587A81CF447C05BC50BA5
+:101CF0009600AEE7DC2E6E6F3E67E2FAD8B9A9090E
+:101D00000EC45BC1B44DF3C81EB3CDA220DECF29F3
+:101D1000CC9C80E5DB7BBB7CD8BEBE8EE2A42B4096
+:101D20004CE07D1C480BF05ECDB9ED83283EECDC29
+:101D30006F54BC1185DFD7E2770F6B9AF73D84C7EC
+:101D40004E7E7E3AFFC27F0E0ABD5726D38A6DDAD9
+:101D500038384927B2FC4806B70F1C11703E9EC1A7
+:101D6000F7ADEA88E6C753689D1CEE80273AF7C1B5
+:101D7000C61FF9F4708C834853506E3C0574F534DB
+:101D8000DA1576F2F3D5F9DD268A0BAF3818E9A615
+:101D9000B8B335B718280E42E57A788501C047A94F
+:101DA00042FD564CCBA47BBB006F3AC7766C57C53F
+:101DB000388CD970DD3B789C6F21EA8A549E4DE5C2
+:101DC000E744FEDC816CD2EBA07F37DE57AAF8DE59
+:101DD000F7391CA797BFCDC88E6125F95AD5E5C73D
+:101DE00019138DFB5DF59ADBA2F13E1F7B4765A8B9
+:101DF0009FE8E174D5E8EA8372B577A690B3079EB1
+:101E000031A33CA814F7432A5F50B83F19F80CEFF0
+:101E10003B56AEBEED09A2CFDF99581AACE762F38C
+:101E2000CFA234F81072B0ABBED945F52BA13EF667
+:101E300053B9FAAD289ACF0E13C5995CB75FDD6C24
+:101E4000FB17D49B6ADF451FCDDC8E72DDFA59EBA0
+:101E5000BF7D0CFD7FB13BCCE5A3AFCD74AFEC8271
+:101E6000A97901AEFFC29E3092471762B87C380B49
+:101E7000F2D39781F3B8E7271497F5FBE9741F6E47
+:101E8000A15FDBAF1CD79869E27416E78AC6B8BEBB
+:101E9000EA77B87C03BCDC4BEDDF31517BFD3A4E79
+:101EA00067F0765DFCB92782E8E1425F8E970B7B95
+:101EB00033683F6A8FE1740EF34DC6FB7317F66407
+:101EC000E4D2BD34546E801E2AC4F9F6424C73B27B
+:101ED0003DA4BCDD24CE6901A88974836D40EFABBD
+:101EE000A8E37A55A5751DC587605CEDC83C4A031B
+:101EF00096D8EBE363815EE9FC787FA6B053E27885
+:101F0000F1227E9BF49D6633CA6F8FD00BAB76EBCC
+:101F1000E36B79F9AD998A8C0371F492F1BC48872F
+:101F20003E85E24C2A1B972C423AAFACDD703FF263
+:101F3000999C7FA59115E039AC5D51691EED61EC6E
+:101F4000C169B86F848E13AAB7C979E254E3495FB7
+:101F5000A57DECAE4CBEAF61BE09FAAB6A54D6D1DA
+:101F6000384E799EE5EB927002709831AEAF7D9C51
+:101F700028EF61DD729EFA75CBF93C90C9E551BB43
+:101F8000D3F1933188E7DFAA743FF6EAD7C3A2639F
+:101F9000BBD1CB82FBBA3918DF8AF1BE487BD04F68
+:101FA0004E26976B95183F0BF34CDFAC8DEBCEDCD8
+:101FB000A6CD0FDEADCD67EDD7E6735AB479D73134
+:101FC0006D7E1A8EDB9B9FB3F13E2E9EB331C5739F
+:101FD000B6C3C2CFD998C77336A678CEC6EF78CE2F
+:101FE000C63C9EB3318FE76CCC4B78E3791BF3781A
+:101FF000DEC6F2A7059CAA449C24E201E99DBD1C13
+:10200000A6B9EF73E5357E8F03E880F3CD1C33F17D
+:10201000CD535883CE1DDCAED477BAD581F1BE8FB7
+:10202000C47A5665A25F54695D9D887833B651DCE9
+:1020300069CD2B3CEEB42A2FCC86F68DB65567576A
+:102040006338E703B19E47B1FE1553C70E846F7521
+:10205000DD51BABFDEB6C2F1CE1D1C7F646761E5FB
+:10206000B1A43779719F8BED198FFAB86FB64E1BFB
+:10207000E7AD8FFBD6C77BEBE940EA7BCF993A12FD
+:1020800051AE9FDE655D87F33F1D26EE9FCCB6EA1D
+:10209000FCFD424F5BAF6CC5FDFA1799B1DCAF7226
+:1020A00002F4F36EF65999965E1B467A78577E9D38
+:1020B00062A07B7109F1B40F2D13734A563ADAD737
+:1020C000A09C5B64A07DF32AE86538DED5F754D286
+:1020D0001F32361934EB19E40FD7D0D7909DB1BA1F
+:1020E0007B0D7D35F5871E4AD1DD6B18AC8DA39F26
+:1020F000B1E2309EEFA7AF1BA6A95756749B0E8E78
+:1021000062DE427F2D83FDC30DEB7B6AF9A664C4BA
+:10211000EFB2459DED6B503F7D298CEE8595E3FF39
+:1021200003B9580E7DE27DC6F2FDE23E709D761F3A
+:102130002E15FB50B991F9ECB1413A2CB733770C1D
+:10214000B45F34B8352780E78ADFFC61A43D05CF52
+:1021500015E3FAA03C4A36B9290EB66A5F5ACC0A92
+:10216000E8F758AAE7A34CC0CB99A6A33F2EC6FD1B
+:10217000701F3FEF9D5EF7AB288A1313F4966CB285
+:102180008723DEB734F1F838B48FA9B141BAD8D279
+:1021900014173ED0165C6F900EBE263C017EB81D13
+:1021A000A7FC08F93D3A9BC57AC7293ED4A7E5FAB2
+:1021B000968A7D850DE4FD3C24F267C4F942AEF3B6
+:1021C000E2A0C3390EBC7F517F285945796ED8BD36
+:1021D0002311D2D116CF97B89EF22D697F1A03E34F
+:1021E00054FC91AFE7938D13A246A3FEB9C7E42A2E
+:1021F00084FC9AA6E7CD78CEAE30FACD145FB96BE9
+:102200008B19E38BEFDCB985BE2FD8E9A578CA8599
+:10221000AC96CE9F9FC97704043CCAC72B9BED3078
+:10222000EFB983B8FC280FE7FE3BD08FDEC0F73B49
+:10223000AEEE5472318E6746D13EB317BE470D12D3
+:10224000F783747CD2F9F6F4FCDE040F7E5FE38F33
+:102250000C4EF1A9D7F3C5F46B4EE28B19D786D09B
+:10226000B96C6660103FFF66E9CEBF6FABDC5ED72E
+:10227000C2F9A0DC1CE8351DF9E47513E9B9D5B045
+:10228000DF8CCAC37335EC8D90168D5135F45A33FB
+:10229000314243CFB359ACE6DECB7D183412929F66
+:1022A0005198AAA93F6BC6101DFDE705CB498EDCEE
+:1022B000AAB95F57BDDCE75048CF1CAFFDCE789C74
+:1022C0002063776BDA57B369C17A48DFDBB81E5CED
+:1022D000BD3F662BDAFBCA0DFCFC34DBC3BF2F3ECF
+:1022E000C4BFB3D94CC38703525D7FE2FBA289FC14
+:1022F00002D29E3E1BFFEE06FE8C8577DD0FC77B6C
+:10230000F1688FD0DC9F16FE409C37E2A15AD88D31
+:10231000AA33B9DDA8DAD76AC6770700FEC6B8586F
+:10232000AA678DC3F8C82685EC8A982EA778496DD0
+:102330001C16F687718C8B4FA85EE4137D7939BE2D
+:10234000DF83F87D85C7952EDCA48F835C47FEC8AC
+:10235000C5680F0AC1DB53831C425FF1AFEE8BF0FF
+:102360002B5472E95EE4EEC3668CB39B31232617CF
+:10237000F9464F5F52AE033FD3F9BBF3EDA3445F81
+:102380009DE546A2DF1BC161B19BDB51F574B780AF
+:10239000B59AF19EF882FD8A0BCFA3580FE1D117B1
+:1023A000E951078FB8D8EBE120E1D305AFFDFA384A
+:1023B000370EA78587147FA01B38E9E7DD13DCE41F
+:1023C0007A16783C93502EC8752DC4F963FF307F80
+:1023D000EC5FFA21D8283D7FA6927D6A71118F8F1C
+:1023E000D5D3C3B46BDCEE72DF3523A5330AB5FC5D
+:1023F00088ED902F665E8BA7F26F4B2F8B619EFC52
+:10240000FED3CDD1895C8794BB417EE0F7066EF4A4
+:10241000BE8FDEEEB8639088131CC14668E29185DA
+:102420005CD5B7D7C7234B3D40BFBF78230D1437CA
+:10243000D9694B21FD42CA598FD83F3CABBEA47A23
+:102440001EA8C76713AFD96F3CC2FEB7343285DE12
+:1024500063485E11178F78F286D929FEDEBB42A54C
+:10246000B8672FD47384E827AB1B539371BF38F53B
+:1024700048C6B33ED0DB4F7DB757FC2818E7F42A97
+:10248000532FAB2358EFD4AAFC648CD338BDC13290
+:10249000DBDF0DBC5AC5FE50FDC30F683FBB64783F
+:1024A0003B6A36B4AF5AF5521486F957AEE2FB7860
+:1024B00079AAE79D41BD713FDFB2C38EF0B36FC90A
+:1024C00041BBEF49D80EB0BDD41F2A56E5F741FDF8
+:1024D000A2EABF8F3E6BC77BD62B4CF1A87F9E7BB9
+:1024E0000FF64385F633D21B3E0B832EC89F164949
+:1024F0007684CF14E646BFD245C3E1BFAEC1736157
+:102500006E737A00D2EF593C2771DCCA55CF93DE47
+:1025100052F1E88A7455C57ED3A2BBB39BC87487B9
+:10252000D8B7517FC714F5778C9341FD1DF3A8BF31
+:10253000638AFA3B7EAFD9A4D5FF2EA7713925ED6A
+:10254000C9031A3A72D17FE71BCF326B69BFB565F9
+:10255000A2BEBE4C0977A13C5A86BA12E6FF1246CB
+:10256000E758B62D91EFB702CF7556EE37FA4ADC31
+:10257000CFBDBD0374B210FABCE39A9585DE9B1DF6
+:10258000C76234F909D6444DFD7CBB53537E67C204
+:10259000204DF95D8E5C4DFE9ECCD19AFA935DE3A1
+:1025A00034F97B47DDA5A93FD53D55939F5E304764
+:1025B000537F669157533E6BF6224DF91CCF124D57
+:1025C000FEFEF2EF6AEA3F50BB4253FE95014EA475
+:1025D000402F2D78EEB2E0FB29564ABFA3DA8D28B2
+:1025E0003796FD36CD86F81E33C150DB9D7D3F63A7
+:1025F00030D787CA86B85306F7E6EFE0203DF617D6
+:10260000EFDC8C18CCF199C480AAE8BCDB9A88F482
+:10261000ABAFA72F1F1371E4AA0370F893C14367F0
+:102620001A410E8DB9E5C8B054C89F18BC60A611F8
+:10263000E4C698DB8EFC2A05F2AD837FC1CB871EF2
+:10264000B98AE5B38654F2F2E98C548F3FBFD07754
+:10265000A60FE77F47CA3A17B793747BCF5CA608EB
+:1026600007BCAF8D70C03400F48BE911A05F4C8FB4
+:1026700001FD96817C3A0EF48BE909387FE2F77F01
+:1026800087F327A66FC3F913D3DFC1B913D3563825
+:102690007762FAFBFAD994BE57EFA176EFD797533A
+:1026A000FA417D2D7DFFA8BE8ED23FD7FBE8FBD43B
+:1026B000C1D28E11609AFB01E867447FE221D3C545
+:1026C000503FB0F4574AFF64432D6B8B4079D1667D
+:1026D0008CF9D41AF43BF66C0730B24F43F4B1686E
+:1026E000E62E1E4CFA423F3BC96FF1DDE4F0781153
+:1026F000CF7F744E4F1BA6E2BE55FB06BA65FF683E
+:10270000E8FEDDC411823E460D712F20FA10FE75E1
+:10271000E9DFEE8A9B09F1BF1B42E275E85F48DC06
+:102720008DF483CB389FDBADFC9EB1F473CB781E68
+:10273000D95FFE178CE4C3D8B546D25F228D2C80BA
+:10274000FDCBB89DB1D6E65C8C63185B65A37BB509
+:102750007DE0BB398FEAB95548B7FD0DEAE704FDC6
+:10276000EA7DC4FCA19CE69FFF8587ECB063455CD5
+:1027700001B6B7F2721FB61F8BB685E194927C7AD0
+:1027800006EFEDE605FDFC583F82D70F607F03FFA3
+:102790000EE34505F9A67F6C732ECAEBFE8B6D74B4
+:1027A0002F74F3B800BD6745462780CB74797EB29D
+:1027B0008ABCF4E7EDEC4376A40982D7BFEFF06C56
+:1027C00042F81759EC7F89203E4BED8FF6C9A9429C
+:1027D0007FFE07787B06E940C253E245E251E223DF
+:1027E000247E8AF0D0135EF5F8D4E351E22FFF8BFC
+:1027F000205E10AED7E32D8857B4E7FEABE06DB88E
+:1028000091BF5F66A9B2D2BB6837C2E3831D6C5229
+:102810003456717A46207EBCD71CC7315FCAC64D7C
+:1028200042D4CAF2B1583EE2FA72CF171DA6E810A0
+:102830007CDF2EF03DBF87FE643DF91E83ECBFB107
+:1028400087FA6F85C9B80BB72D776430FE71593E92
+:10285000877F815325F84FC85A487A32B3713DD3E8
+:1028600001FFA15C9AF47511BD4FF925DB8D9E5BCC
+:1028700036A997563F2DD0F9ADEF167AE9DD3ABD6E
+:1028800054AF577E3E58F8B39DCCF92DDF9DBCC6A2
+:10289000E5DACDBE3BC9DF2D9D28F82C49D059AAD9
+:1028A000436563908E9887F6C963F86E690EBEEF34
+:1028B000E9A3FC5DCC4FE93D2C40FBEB6410C498D0
+:1028C000BF174428E68F464C29C6BB7113864D18A6
+:1028D00088DF43DE658B1CD29BDE65FB0F7BC8BBAC
+:1028E0006C47263AE87EE5116B2AE95FC887A61097
+:1028F0007BE06F607F1A08FBC751D8BF307D03F6BD
+:10290000AF81B0DE3761FFC2FCDD992B18B69BE4C6
+:10291000D0C6EDC8F6F7D827C0C1A467F8DD93F399
+:10292000723F84EF5B311913D17EFE56CC2D1371AB
+:10293000BD6FC5F431F0D462A634FBE0C0EEF443C1
+:10294000C907C1F126D1787AF84A78EAE128E1FB93
+:102950004FC0F396EEE0396230E3F649EB1FA21266
+:1029600052D07F1725DEA3FC6D8E0AF97338B5446B
+:102970008C57BD8DE639B66E34330E23BF4D16C26B
+:10298000B5CACAE1A5B75BB16D7D0CA1F1BB57CD4E
+:102990009E8221B0EEB39B55BA377EE9C530B2476F
+:1029A0007DE6E7F6B67B14CF649C5F95EA5887EF27
+:1029B00088B2B7F83B67ECEBA3C9D322BF059D6E85
+:1029C000E3F7EDABAC93BAC5A33C4F4D71BA47707A
+:1029D000FAE7EF454ABDA29F85BF4B20DF2FEC49A8
+:1029E000CF1819CEE5603F0B97DB12AFD08EF249BE
+:1029F000D0CF489073493F09A7F3C5CEDEEEF9B8B2
+:102A00003E6947E8EC17E147793B363084DEE52A3A
+:102A100038A1523CF11111DF75E7905A5B0AE0A929
+:102A200029CD5383ED98FAB58A72E66D58671CDAA2
+:102A30001F4E0CB3D1F9F15B9E43BF3344C88B1CCE
+:102A400096A3B9AF26E94EB551FC4EE77BFC3EDEBE
+:102A5000D2DFF0B8CDA5BD558AFFD7C7C58D65E9D2
+:102A60003F417BE3845E2697DF11942FF21D204BBC
+:102A700082813942F4EC3047387384CC27223356B4
+:102A8000938F74F5D5D48F1E95A2298F710FD6948C
+:102A9000C715E469F2BD8B6ED5D4EF337BBC269F9E
+:102AA000E8B95B533FA97C9A368F7C0770EF5F3B98
+:102AB00057D36E405D89A69ED357A129673E776B99
+:102AC000663CCA71FE2F75ED524DF9D351053C7E1F
+:102AD000DCB680EE29A6357D4FD39FC46F521CC74C
+:102AE0002F73F0FDC107FF91DF42E0393F41BB6F1B
+:102AF0004CB08F3B66A7546BD748BA411CD4A17F1A
+:102B0000960EAA99960E7AF1389EFCDF0C73A01EE1
+:102B1000A3C73FFA2342D789FE8850B8A03F22348A
+:102B20008FFE88D0FAE88F082D477F4468F9B013EC
+:102B30005AFC8F68D5E2FF960FC6FF433C8D6ED3DB
+:102B4000D2831E4FB77DA6A58FB19E7082CB04D0D5
+:102B5000C790DE259E66C37FB4CFB3A268B41BDCEA
+:102B6000C1DC742FE07F0B5F9775F8FA92AD1B8183
+:102B7000EF5C5EF17239DED33E7F6580FB0B94BB68
+:102B80002942CEEBED00329ED4379EE3D377328CD0
+:102B9000E4D55786B648DC3FBEA3B6915D3E91753D
+:102BA000BC81EFCF0CE9E56159BDF1CA36703F94A5
+:102BB0003FB5E8BE5CDCE7E6FDDA928C7ACDBC017D
+:102BC000FC3D4196D546EFB4C8F9CC4BE2F147D66F
+:102BD0002C21A75D3C0E29228BDB7F225D768A8328
+:102BE000F6663111E7C992E765231DBE1D96817413
+:102BF000B691DBB9DA4C0E8A6BF1013DA29F12F55A
+:102C00006DD487FB0B7DB4E143AB95D31DD3ECEFC3
+:102C100083FC564D1CEE909D764D3EBB3941537F53
+:102C2000E82187A63C3790A9291F76C2A5C98F68DD
+:102C30001DA5A97FCB076E4D7E745B81A6FE6D9F9F
+:102C40001569F249ACE34984E7F8AC141EDFAF081C
+:102C50003B8083E365DE77E2E93E8D3C47C8B86C94
+:102C60008FA063FD796480D94371DE0D89CC45F76F
+:102C700041ACE23CC8B4E7148F88AB96FA3CF369E8
+:102C8000E3AA653C75D779469C5FE47922249EDAF5
+:102C90008DF397F1D45D7817EF4BEAE9F35E817716
+:102CA000FD3A0698F9FDAF86EF9AE91E8B9C9F7E50
+:102CB0005E9B443CE0766BF7EF0F3D20E8AC2DA522
+:102CC000686616D47B16B62782E775E3B9DA7C000E
+:102CD000DF861F985D2B1D371E6FDE50BE9E627C07
+:102CE00057358BDEE9A47B6B72DC6A31EEF41CA5F0
+:102CF000DBF5CD8BE6F15D2CDA4CF72E7A1E8FC317
+:102D000035C1CC1AE99D24710FE18175CDEB3154A9
+:102D1000B3D8DC64E2EFE3FB4D68272A1C0F7A602E
+:102D20002EDA0DDFDF68037DEDD93A23D97D1EDA77
+:102D30003DE63ED020BBEE950C80731AD24921E2CD
+:102D40001FFA3D97CDE39D1FCBE2F2215FFDBAEB69
+:102D50003E804523E7F9F9AF1BBA237A94EBF8BF1D
+:102D6000BA1F20E9570F2779BE6662FF1A28E625A9
+:102D7000E1D7653F11F093F7331C4B4C455B6D7405
+:102D8000CFA300E3CA24FEBECEE674F96616C737A9
+:102D9000D64379D453BD7C352B1AEDE09DCC116D13
+:102DA000BF813DF8FFE8DE04C1BFA7FB5E3DC989D6
+:102DB000EBE4430FF7BF7AA24FFAF72DEE8185C8F7
+:102DC000091EEF23F0E11F6820BFFA9A482D1FFF6C
+:102DD000358BDB5D9E96FB850FCEDD5A39C1D0AEBB
+:102DE000DFB04A15726241D7EF48E0F7F9AB4CA467
+:102DF0005F3356F438C6197CB2D14471B163DD8CAF
+:102E0000F49892CD8A7F8B82FBE898049CBFD7A769
+:102E1000DD8FEF60AED5E8FF285DABFDBED0C67F8D
+:102E20006F62BEFEDD14715E5F7883F3FAD92CE128
+:102E300007723117E95DC2FF5F2EDAE8F5AE4E3F4B
+:102E4000F79BE1795BE576278A1B93FBBB03FD3794
+:102E500021EF81003CC333711F6F34761BCFD70540
+:102E6000CF1EE2152EDA44BC828DC76774EE0FE3E5
+:102E7000FE4DE95712F52FFAAE5239D6C7DE2EE5D0
+:102E8000F2B80BE94FD2FBAB3A6D06F2B774EE8F96
+:102E900024FF3CFA71A2810ECE1BF6C58F7206E7A5
+:102EA000E76953357E107DEA59F1129D17CB533DEA
+:102EB00031D918876D74595D907FC47684DE8F2A6E
+:102EC00014762FFD7CBBCE5D63F8FB2E9D3EAECF0E
+:102ED0007616F07738402E32E42319873095C129D1
+:102EE00015526F6034CDE7DBFA73A65FCBE57ECC7D
+:102EF0006BB7517BCFDAD1941FD0B87E09DE8399AE
+:102F0000D9B0D0842EECB62797E78743D3B6FEFE20
+:102F100095E188B7714AB776F9BC6C85F8A14D1771
+:102F20005F2FD3ADD99C5F7E9D2DE5B888435AA114
+:102F3000101F2C55988C4B22392EF3579B443E9FE3
+:102F4000E797ADE2F936F1BEFE0E6147C175638ABF
+:102F5000EBC673FF6E6167C175638AEBC6EF28B776
+:102F6000308F720BF328B7308F720B53945BF8BD20
+:102F7000841525E7AADC0F353194EFAE59D9C4107A
+:102F80007E413F54681EFD50A1F5D10F155A8E7E2B
+:102F9000A8D072F44385E6D10F155A1FFD50A179D0
+:102FA00036EAAE601EE59C7BAA263F1DF4FC892113
+:102FB000FC8D7EA8D0FED10FA5E9CFB344D3FE7E11
+:102FC00056A7698F7EA8D0FA0FD6291A3FD583E27B
+:102FD0009DD3D24D71443FF31D4535D980DFFF8825
+:102FE000F8EF874D2988E79645FC5C16EEE2786E8F
+:102FF0002AE07837308EE78E3984E7E5669ECFE7A2
+:10300000F1C97AFA417FCF4413F7F7608AFE1E4C6C
+:10301000D1DF8329FA7B26A6717F0FA6E8EFC1EFE7
+:10302000E8EFC114FD3D98A2BF0753F4F7608AFE94
+:103030001E4CD1DF83EDD0DF8329FA7BF03BFA7B96
+:1030400030457F0F7E3F897E2753705EA8C70FD41F
+:103050009C1F810E35E747BB268F7A7C687DD4E3C1
+:1030600043CB518F0F2D473D3E348F7A7C687DD402
+:10307000E343F3BFCC72109FA13E1FDA0EF5F9D0E7
+:103080007C7693EF0DB49D4DDE7CF918A66D91CA48
+:10309000B30A888CE6ECF7EE433F5D5B98921C0325
+:1030A00092D3B4E2C3FB2682BEE611F17F39ACC3F2
+:1030B00080F8F688F7D43D0146F196D97F4BA4F20B
+:1030C000CB78AF5FC4DB22DE73F733FA5D12E92FF2
+:1030D00096ED5DCCAE622AEB07F3DDD7D38F2FEBF5
+:1030E00091FC0C9907DE00C67895DCE5B63C8CF7C0
+:1030F000DC6150284E62C74A1E27ACA7AB33424F53
+:10310000DA61D87704EF81747815BA0F9C6E642762
+:103110004C7908A7DA3CDC7FDFCE8E11EBAABD1517
+:10312000EF9BC8794BFB26C809BA3F37A6A3754267
+:1031300034F4E3F18DA3DF49293473BD01DBE17978
+:1031400072884F716F0DA1EFF785DCF4F8F8F83F46
+:103150007F6E0A6F17CEDBFDFCB92882E3944685AB
+:10316000E2A5C6EC666EBC9FFB1F429E0ED91D50A9
+:10317000713C6F231F4FF6EBDD9C4CF716BDAC6D19
+:103180006202F9481486725BC20DD6770CD707C766
+:103190008613689FBED97B3FB70F8FC9C7383AD611
+:1031A000C2E81DCBC9C3DFD5AC97D03E92FAA57D4E
+:1031B0002DC3A7D07BC1537C2B56E2B63ED9B7E4D2
+:1031C0008DDE587F1B73391DB415D1BD58399FC191
+:1031D000EE7D06D81659166B358429886F76342E05
+:1031E000847E80F36720BE735D267ABF77AAD16E96
+:1031F000A2F7237A883FB96A93F1273A7D4117678E
+:10320000D2B0FC8364B4272F8D3490FD77E94BFC5A
+:10321000F7003C9B14926B520FF28A38B5AB8D6F5E
+:10322000F49E8570DF67A2FE64FC4975AA3FD980D1
+:1032300071F57DB7E4C4AAA407C4E6A01EE0FBD5DF
+:103240007DA3B0DE2AFE8EE5D5C699D101EA89FBC1
+:103250006BCA04BCCA441C93171FF45683BF8B254A
+:10326000EF77B026AEEF497B8EF7B7C38E237EBDD6
+:10327000CF8877A5D77AE95EB63E8E6851A389E2FA
+:103280008E16E9F4C24AA11756DE402F1C9CA3D328
+:103290000BE5EFA588364CEDF73EC6EDC97B89C539
+:1032A00026CEFFC5FB18D9618B574C30D03BC82FB9
+:1032B00071BA295EC1F59BE297DD74BF50EA8BEFCE
+:1032C000083D66DAB52482FB1F84DE3213E32B014E
+:1032D000BE856D61220E2B91D259D778BCE5341B87
+:1032E00097036DAFF177203A7D16AE4F1D63FC1D3D
+:1032F000331D5D4E35FA0D78E1CE3506E812F293B6
+:10330000510F82FE66A35E148774EECCA7F8BD024F
+:1033100085EEBDE8E9BCD054FB06C687166E672E65
+:103320001F0BA573A05FECCFA7D0FB001E71AE955D
+:10333000F4ABA7F77911C21E65E3F6A62EBB04EA2B
+:10334000A8F44877CE2CD41BE7A16FAF2F27188C99
+:103350003B8BCCE2E5653939B31AF190D3839D42BA
+:10336000FD9E99E0E191EF20F46037407B01CAC9EE
+:10337000071ECA359784C8C9E1AEF18D434704F1F1
+:103380005DD275DF2F8BDE055DFA481AFD1E4E4FAC
+:10339000FA7029C015F9625E74DBC3F80B6B0D3946
+:1033A000CC3D31017F2750AE8F05308E70AEC837CF
+:1033B000EFBDEF4F6B6D0417CAD7E78C998571216C
+:1033C000D5D6B649487635599E02BCC718944F45A4
+:1033D000EE2405E5536E00CF849BE4FD649D3DA281
+:1033E0003987D7D7DB254AB3B8DC96BF8B72EA9111
+:1033F000837B71BF92F33FD5C3EF30ECCCE1F2F7A2
+:103400007FEB1E84FEFEC32FFB7A9ECC81753C6E43
+:10341000E0F7F9FBAA4D4CD887C82F2CE50513EF30
+:103420006004F1EEA677741B1E51ECA1F629CF5A69
+:1034300085DFA3EFC18EC3323B9EDC0EEDE6D59B4C
+:10344000E9F7F89E4BE7F4F31CD00FFD5E8AB9F55F
+:103450000DAB3308C78FEB7E6AA2DFA56181347C98
+:103460007F676E6D980BE5F17057D12F71DE1159A2
+:103470002E92438D18430EF9BB7A15BD88DFABD76A
+:103480001D7E16DF13A86971D2EF95780FE5AEC6E1
+:10349000774E86BB3C07B1DC6BB3D37B1A8B1B63C7
+:1034A00068FF9AD747DC0B651DE46793F07F47D828
+:1034B000AFD6BA38FD5E11E70E14905335F5BAB7A2
+:1034C000E3493BA1DECEA07F5FA227FB82B427A009
+:1034D000FDC01C626794F60953E6A939A837149B0E
+:1034E000B5F71265CA86F27D5F9E03E777ED5B59FB
+:1034F00093FAA07EBC41B1D37B9336C7ACD1902F59
+:103500003B61C2C84E5618EB30E3FB031D805F8C55
+:103510008F2E017E4539532CE2B4CA368D267E2B80
+:10352000F343DACD3B9C32BD7FC3D1FE2F23FD0494
+:10353000DCE4B72CB3BBCDB1217C5FDAA468DE1D1F
+:1035400090F98E1C95F311A8E308BF071E729AF13B
+:103550006D9F62502330FE8F0D7568FCC7508FE25F
+:10356000410A53D871FE0E3CCCDBC9C7CB0BE9BF77
+:10357000A489DF9B9679A84FFACFDF732209AE5E4C
+:103580003BACDB89A99DE60970203875AC87FE1C31
+:10359000340EE1A334E037E179BB18E350203FD784
+:1035A000EE37E138258DFC1D13CF3A3E8E676D8CCA
+:1035B000391BF523A3DDDC1FE1277E6F15E6477A73
+:1035C0006419C005EF63E17D37DC5BF4F0F18AF943
+:1035D0009635C5D03B0AC1EF1B4C888F393DBC8B5B
+:1035E000903594D36D49E338BABF5E6674D33D0716
+:1035F0008F80EF274BC21E45FFC09C8D4F989C903B
+:10360000EF3794D36FD6504E5F852981347AAF68F7
+:1036100049980BE739C7DE44EBEB82EF63000F05F7
+:10362000DFB92922F8025DF8306EAF6CA3169FC196
+:10363000F970F8966DF412BF2D307ACCF6D0796C13
+:103640003A9C86F7AAE6007FE3BB12CCEEA1FB9280
+:103650009F3E362B99D609F344B846BA1C93F0FD29
+:1036600021A0137E0F46AC47DEEB96E34D1CCAEF5C
+:103670009D4E1CCAE567CF7CE926BDA601F08B767E
+:10368000EF9EF8D28C821BC63597F1DF91D0F3A95B
+:10369000E44FC997924F25FF3E6B2A0A24284139EF
+:1036A00003FB6CED8BDDC0A951CC77AEC02BC0F510
+:1036B00058E83DAF6A81D7E2142DBF637FD8EF1C75
+:1036C000C1EFC5E30369F82E93AC2FC72D8EE5ED4E
+:1036D00090EE91DEE688F1B0FE52AAAFBDA752DAB5
+:1036E000252F76AF8A4779B14FE17ED0F547FB7F32
+:1036F00007F5D73D5C7FBD50B57D31EE97CCE84FE7
+:103700000E7DDF7F3EE83928271688FDB92CD0BD15
+:10371000BCB890EEA9181AC2CF653FDB93EEE1F278
+:103720002680F2E6CF7B5EFDE3AD8EE07E2AD753A6
+:10373000B2F65D93D7160A3FBEFE47333BE93E5EC5
+:10374000A9CDECC078E7D2462FC95F96007AA112C6
+:10375000127FA6A30B6FA342F7C84AEB46FAD5FF28
+:1037600045395DBA6E2ABD7B20F126DF6791FBAB40
+:103770009CFF7A31FF2621DFE60AFA9E5B3ECE9C53
+:10378000D88BF46E0CB36473C4F73965DAEF5D78E7
+:10379000EBF25F67AD467EC1FB45743E5967E2F6CA
+:1037A000BEDDDCFE7861E9C1DFDD07F5CE3FBE2579
+:1037B00099A95ABCA19EBA40E8AB0B85FDAF1BBCD2
+:1037C0006D19DA3B985FF81CC75BE9DEDFFE05DFA9
+:1037D000132B4E11F26E3D7F07A0A4791FE171CE2D
+:1037E000DA0D2627D4DB37D44970EA92FFB5B976D3
+:1037F000B42BCF5DBBC58472629F84838E1F8A45C4
+:103800009CB08433EE4B4A887F43D647F988EFDF7C
+:103810003FB4242C0AE379E4381F093A2FAD8D898F
+:10382000C5F14A6BBD3FC6F390DC0FF4EB3C1DC6FF
+:10383000F9A504FA43BE3D3DCE95BC342BA8CFEA92
+:10384000EBBF2BF0F8B489FF4E4D5244F32E8A6B38
+:10385000A80977A1FC1838B0CD8FE3227DE3BCCD59
+:1038600006FEBB3603ABDA3EC77980AA4D713598A8
+:10387000E2FB58A87AC7437EAB81DFDF4A5179FA71
+:103880009590D7501EC072D6AB8D7E5F23246E56A6
+:1038900043BF66B68D7E3FD1DC8BD1FB66925E6501
+:1038A0003F925E253DF7B4BE2B42AEDC687DA79DFE
+:1038B0001C9E66F1BB2937BD3E0BFF1D5DB92E393D
+:1038C0003FD0E1DDF4BEC7F7B3C9DE737A852B19AB
+:1038D000E3267B5EEFC6FCF86ED6AB5FA7E41B1950
+:1038E0000BDFE5CF6AE27E87D30AEC6FD0EEF4926D
+:1038F000308A6F93EBD2DBC3FF1FB640B5F6008072
+:10390000000000001F8B080000000000000BCD56D7
+:103910007D6C5355143FF7BE7EAFDDDEBAB1751B2B
+:10392000DBBA8D8F46BAF1CA80F891681D8CF0C75A
+:10393000A2DD14DD0C6C25B031C68A9360A8C6B830
+:10394000B2229211E24C3618044C876C7F18205D2D
+:10395000208AB19A8689468311E11F1292A60B38FC
+:10396000D16856310A44649E73DF2B9D08897FFA23
+:1039700092E6F4DE7B3E7FE7E3DE0F7A658085002A
+:10398000C77B1D00468093BD4E41A3BD2EB19FA7AE
+:10399000D801E6007E495B930D60AD05DA7C565C8C
+:1039A000C6F1970F9008568DF4B3CC7E831DDA9A3A
+:1039B0009026E4A4CDEEC67DBBBA7FADC7DC0F393F
+:1039C000002D90DCE7588AB2C12A1845538981AB93
+:1039D000368E7C579F463E77466EBB3EB51E88CFDF
+:1039E00066708E5600646DFFAEBE10EDB50F567852
+:1039F00018CAAD0BD6268278BE6E57A102B86EB734
+:103A00003A773BE83C54A1F4E13A6BD033358CE78C
+:103A1000EDBB1629C4BF9D812F4A7E0F1C002800D4
+:103A2000E8807B9FD7B41C6013FD43BE4D56C32472
+:103A3000ABC1F3E0C43C19E53B14B387A1FD4DC312
+:103A40002C6EC4FD060E7BD81280F2B06F5511DAD1
+:103A50004B1D64CA51923D5CEF4D9A5485339500DD
+:103A60005D0B7D35CA325CDC99999941FD8F20460A
+:103A700020515C512FC501434C1E05F2DB67207CB1
+:103A80004E2C760A9C13839336A75BC5BB11F106B7
+:103A900047010794DF6652FD2B37A426DF46BF524D
+:103AA00036AE1CC575BDE4FED649717E2581D1496F
+:103AB000721ABFACF1BFF9A8C98FFAB6D92A0B01A7
+:103AC000E9C66174A216CF9A4D9C70E8D47C6E1F33
+:103AD00079AE00D08F763C77E2F921DA7C0C60F782
+:103AE000E08A8224C9BD5BBF3F540D50A6E1784DEA
+:103AF000976CA4FC5C1F29B4EFC4D83606C20B0037
+:103B0000CF378EBC5D46F4FA88B939827C2BE5C686
+:103B100095B9186FC7E15C8F84FECCD0F714E64DE1
+:103B20004121C4A72BB0A21010AFEEBB13EFC955B3
+:103B3000681FB126DC7F8F664542C8D2DD7BA64C6C
+:103B4000E2E88AD1DF4C786EE1B1171E433D3FB108
+:103B5000C85891E07716CAD68CDEFBE9542FC28094
+:103B6000F51C78F3B2D0F30B3FFF4C0BCA77074E2E
+:103B700065939E2D439796CBB8DF59E5DFA8CC21FE
+:103B8000BD2363324204C323353E8CA35D01E1674C
+:103B900083DDF7420BE1FE9524707F98BDCE334C58
+:103BA000E07B2FCE488E8170F7C7C1201395C140AE
+:103BB000F57D5D8260146943A5DA2FE9FD20E1827D
+:103BC0007E5CCF1928A3BAD83C76A0CC89F4479B59
+:103BD000BA5E3BF6E2D7908DFCC78C06CA975F07AA
+:103BE0000605E5368498374275D389FD5A94B1DFCE
+:103BF000A764097D9B87D1A9BCCC3E4044C4F5A3F2
+:103C00000E56931FE5E194E715A45774F176CAEBBD
+:103C1000951EB312AAA03C3905DF95016915ED8701
+:103C2000B091E6335A9FB2CD43FBAD39D043F2B6E3
+:103C3000A5D138C73C074EE72E91D49212F5B55561
+:103C40005617F5927555099E6F1B6732D5E9B68FE9
+:103C5000CFAD02750DC01E8E67D7AD27C039CBEF33
+:103C6000AED3E306EA8FEEE3182FDAEF8E8E7F51A4
+:103C70008C7AB69E595FABDA1D00AAFF80D6CF5B67
+:103C80004FABB8044E4F1A36B8337AD6BBECBB4BA9
+:103C900030B7A34AEB8B43C8BA9EF2F63840EC64C7
+:103CA00063F3CE79486B641137E852653EECC37E0E
+:103CB000D74503F5516097A6CF757177A588B731C1
+:103CC0000F66D5C398A217726979C443C8C5039615
+:103CD0003DB01887CD56AB8E683860CD267AB88750
+:103CE000BB7488AB97591409F10E9AB26B684EDE1B
+:103CF00034AB346651E90EEE1BEF40176FF20B66E2
+:103D0000C0BADF210D30A24FB97B18220D8BF2FD16
+:103D100031AA5F0744190820E28CFC9EFEF4875A02
+:103D2000B2FF6479F2374097F43BDB9A57627D7CAF
+:103D3000AE68F1B993B554E773CEAA73FA881EF64C
+:103D4000989750DC3E68AA262DF89FF27E9B476824
+:103D50000EC758FC7DD29F8EF796D6C73EA3750F2F
+:103D6000433F1B9CFE6FC88F6799BEDAC32907D2F9
+:103D70007CD23FAD57CF71FE7A4D581775DAF02DD2
+:103D8000E510022C5943B1C34A75CDBC5E08A2FDB3
+:103D90003EF7D90D541F7B532630A2DDB086475D18
+:103DA000CA32C990AFB47835079CC7CC994F770C0D
+:103DB0009C75F39011FDDC0BA608F18309E7B12B8C
+:103DC000338F0DDCEC15FCB12F6FD37C2F917E9DD2
+:103DD000C841FE921D4C09234FEB8DA923DF225DC4
+:103DE0000B110FE1DA95EF9FA2381237564FFA31D7
+:103DF000BF7BE5A84971ABFA66FB1F7BED76B69DEC
+:103E000067FC9A4E4D9DF868295193B877EA629203
+:103E1000B837EEF767DAE1D4911DE48B73E2B7F2BD
+:103E20000863C43F7199FCAB3359E35236C9E97F4B
+:103E30009E7DAFC085D2DCA945E22A8199129CF60D
+:103E400061356F4F6A7D98CE8B85C05F4654CD4FEC
+:103E50001A3FE1FCACFBE433EBD83AAA9F74BFBE37
+:103E6000ACEDDFB8559943F3E546AC2A07DC0FEF1C
+:103E7000CF4B385FE99D70B8C26BF72CCBDCA76BDA
+:103E8000D2B7AB76DF4A9ADE351A4E6BAC5CC5E52D
+:103E9000F9FB70D1EA245D0769BFD3794EE70F5E65
+:103EA000BF702EA742E4ADFA1D10F99A4BF613B776
+:103EB000CFBF856D05C59277D25FF17FCC57DCBC53
+:103EC00090DE0D435CBC1B4A09F825827A39C6078F
+:103ED0002E10F3A055B228FD0F98077E9A078B6924
+:103EE0001E0C883EBFC953E738A379D023D60E48AD
+:103EF000EDD4E13AC19336F23769C6AA47EAF754DE
+:103F00008A7BA0843ABA4ACD13F5F591D76C47E97C
+:103F1000FD1666DE8326940FEBB57EDF6C8D8CE29A
+:103F2000FE748487F4686F303772B003F707D7CC1C
+:103F3000554288D334687C9D1631179EE05CAC53A3
+:103F40002D0591A315C48F7D8D710EB63C22EEF127
+:103F50000FEF4AE2BD989A0FEAB907160CD379A37E
+:103F60004BE8FB243D67F6D984BEC1466F91459C62
+:103F70001770928FE4F95FA2FC164B2A1F3E0404CF
+:103F8000DFA143DE22CAC7A12683E0DBCF7C2DED73
+:103F9000A4A7DAAAD0FB32D9623939A6A623CE96D5
+:103FA000D27B558D375DBFC30B64814B7968F2209E
+:103FB000BD434275E0EAA1F72BD5E1E24C7E9817AC
+:103FC0007361CFE4295D8F213DE62B5FCD571FFB49
+:103FD00077BEF2B57CB120D66D36E52D2AF0BFC98B
+:103FE000D53CEC9020998531495C711891FE91EF98
+:103FF0007F558DF342119DB71A93CB06E85DCCA196
+:1040000033FA803E0C519F8BF739DEA258E76D5A88
+:104010009DB7A5EBF18DFBEA313937772A4BAB47DA
+:1040200094FFDEE2EB237BBFB04BCB69F3FC5F5226
+:10403000F383ECECD5E6C89F467FBFE8F36385FFCA
+:1040400078679EF7FC504AF70CDC99984BF7CE99AD
+:104050003CDF3EE233CF4B19FC8467514A4FF124D9
+:104060005A7E2AA5F74C5BF04BD137FFD5CFB41F52
+:104070007F03DC4DE081B00C000000000000000078
+:1040800000000018000000000000000000000040D8
+:1040900000000000000000000000002800000000F8
+:1040A0000000000000000010000000000000000000
+:1040B00000000020000000000000000000000010D0
+:1040C00000000000000000000000000800000000E8
+:1040D00000000000000000000000000000000000E0
+:1040E00000000000000000000000000000000000D0
+:1040F00000000000000000000000000000000000C0
+:1041000000000000000000000000000000000000AF
+:10411000000000000000000000000000000000009F
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:10414000000000000000000000000000000000006F
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:10417000000000000000000000000000000000003F
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A000000000000000000000000000000000000F
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000000000000EF
+:1041D00000000000000000000000000000000000DF
+:1041E0000000000000000000000033280010000064
+:1041F0000000000800003330001000000000000242
+:1042000000003328001000000000001000003A7881
+:104210000000000000000008800000000000000016
+:10422000000000008000000000000000000000000E
+:1042300080000000000000000000000000003120AD
+:1042400000000000000000080000336000010004CE
+:1042500000000001000033680000000000000002C0
+:1042600000003370000000000000000800003374FC
+:10427000000000000000000200003A700000000092
+:104280000000000800003A4000080000000000089C
+:1042900000003D88004000000000004000003A504F
+:1042A000000800000000000800003A60000800005C
+:1042B0000000000800003A8800C8000000000098D4
+:1042C00000003C18009800000000002800003C5846
+:1042D00000980000000000280000337803600030E0
+:1042E0000000036000003EB0000800000000000174
+:1042F00000003EB10008000000000001000020089E
+:10430000001000000000001000002000000000006D
+:104310000000000880000000000000000000000015
+:10432000800000000000000000000000000000000D
+:10433000000000000000000000000000000000007D
+:10434000000000000000000000000000000000006D
+:10435000800000000000000000000000800000005D
+:1043600000000000000000008000000000000000CD
+:1043700000000000800000000000000000000000BD
+:10438000800000000000000000000000800000002D
+:10439000000000000000000080000000000000009D
+:1043A000000000008000000000000000000000008D
+:1043B00080000000000000000000000080000000FD
+:1043C000000000000000000080000000000000006D
+:1043D000000000008000000000000000000000005D
+:1043E000800000000000000000000000000000004D
+:1043F00000000000000000000000000000000000BD
+:1044000000000000000000000000000000000000AC
+:10441000000000000000000000000000000000009C
+:10442000000000000000000080000000000000000C
+:1044300000000000800000000000000000000000FC
+:1044400080000000000000000000000000000000EC
+:1044500000000000000000008000000000000000DC
+:1044600000000000800000000000000000000000CC
+:1044700080000000000000000000000000000000BC
+:10448000000000000000000000000000000000002C
+:10449000000000000000000000000000000000001C
+:1044A000000000000000000000000000000000000C
+:1044B00000000000000000000000000000000000FC
+:1044C00000000000000012C8008000000000008012
+:1044D000000000010000000000000000000040009B
+:1044E0000490000000000490000019C800000000C3
+:1044F0000000000800004948000800000000000813
+:1045000000004928000800000000000800004938A9
+:104510000008000000000008000020080010000053
+:104520000000001000002000000000000000000853
+:104530000000401004900040000000400000499836
+:104540000008000000000001000049990008000078
+:1045500000000001800000000000000000000000DA
+:10456000800000000000000000000000800000004B
+:1045700000000000000000008000000000000000BB
+:1045800000000000800000000000000000000000AB
+:10459000800000000000000000000000800000001B
+:1045A000000000000000000080000000000000008B
+:1045B000000000008000000000000000000000007B
+:1045C00080000000000000000000000080000000EB
+:1045D000000000000000000080000000000000005B
+:1045E000000000008000000000000000000000004B
+:1045F00000000000000000000000000000000000BB
+:1046000000000000000000000000000000000000AA
+:10461000000000000000000000000000000000009A
+:10462000000000000000000000000000800000000A
+:1046300000000000000000008000000000000000FA
+:10464000000000000000000000000000000000006A
+:10465000800000000000000000000000800000005A
+:1046600000000000000000008000000000000000CA
+:1046700000000000800000000000000000000000BA
+:104680000000400000180000000000180000430077
+:104690000040000000000040000043000040000215
+:1046A0000000000100004301004000020000000083
+:1046B00000003000004000000000004080000000CA
+:1046C0000000000000000000000030000008004072
+:1046D0000000000400003004000800400000000456
+:1046E00000004B00002800000000002800004B5094
+:1046F00000100000000000100000380000800000E2
+:104700000000008000003800000800800000000267
+:1047100000003900002000000000002000002008F8
+:104720000010000000000010000020000000000049
+:104730000000000800005108000800000000000808
+:104740000000512000080000000000080000513067
+:104750000008000000000008000051C00008000030
+:1047600000000001000051C100080000000000012D
+:10477000000039400010000400000004000051D087
+:104780000030001800000010000051D80030001860
+:104790000000000280000000000000000000000097
+:1047A0008000000000000000000000008000000009
+:1047B0000000000000000000800000000000000079
+:1047C0000000000080000000000000000000000069
+:1047D00080000000000000000000000080000000D9
+:1047E0000000000000000000800000000000000049
+:1047F0000000000080000000000000000000000039
+:1048000000000000000000000000000000000000A8
+:104810000000000000000000000000000000000098
+:104820000000000000000000000000000000000088
+:104830008000000000000000000000008000000078
+:104840000000000000000000000000000000000068
+:1048500000000000000023E800800000000000804D
+:10486000000000010000000000000000000020081F
+:1048700000100000000000100000200000000000F8
+:104880000000000800002DA0000800000000000843
+:1048900000002DB80008000000000008000024E817
+:1048A00002D00028000002D000002E5800080000AE
+:1048B0000000000100002E59000800000000000167
+:1048C00000002D900008000000000008800000009B
+:1048D0000000000000000000800000000000000058
+:1048E0000000000080000000000000000000000048
+:1048F00080000000000000000000000080000000B8
+:104900000000000000000000800000000000000027
+:104910000000000080000000000000000000000017
+:104920000000000000000000000000000000000087
+:104930000000000000000000000000000000000077
+:104940000000000000000000000000000000000067
+:104950008000000000000000000000008000000057
+:104960000000000000000000000000000000000047
+:1049700000000000800000000000000000000000B7
+:104980008000000000000000000000008000000027
+:104990000000000000000000800000000000000097
+:1049A000000000000000250000400000000000089A
+:1049B000000025080040000000000028000009C099
+:1049C000012000100000000880000000000000002E
+:1049D0000000000080000000000000000000000057
+:1049E0000000402002D00028000000080000300035
+:1049F00000000000000010000000509900000000BE
+:104A000000000001000050B00000000000000002A3
+:104A1000000045A000900008000000088000000091
+:104A200000000000000000000000296000080000F5
+:104A300000000001000029610008000000000001E2
+:104A4000000029700008000400000002000029781E
+:104A5000000800040000000400002FB0000800005F
+:104A60000000000400002FB4000800000000000453
+:104A700000002FC0000000000000000800002FC848
+:104A800000000000000000080000300000000000EE
+:104A90000000001000005040000100010000000173
+:104AA0000000500000000000000000200000080886
+:104AB00000100000000000040000080C00100000BE
+:104AC00000000001000008B7000000000000000125
+:104AD000000008B600000000000000010000100007
+:104AE000003000180000000400001004003000181E
+:104AF0000000000400001008003000180000000250
+:104B00000000100A00300018000000020000100C25
+:104B100000300018000000010000100D00300018E7
+:104B2000000000010000100E00300018000000011D
+:104B300000001010003000180000000400001014E5
+:104B40000030001800000004000030000100008068
+:104B50000008000400003004010000800008000488
+:104B60000000000A000000000000000000003068A3
+:104B70000100008000000001000030690100008099
+:104B8000000000010000306C010000800000000205
+:104B90000000306E01000080000000020000307054
+:104BA000010000800000000400003074010000805B
+:104BB00000000004000030660100008000000002D8
+:104BC000000030640100008000000001000030603F
+:104BD000010000800000000200003062010000803F
+:104BE00000000002000030500100008000000004BE
+:104BF0000000305401000080000000040000305824
+:104C000001000080000000040000305C0100008012
+:104C1000000000040000307C010000800000000162
+:104C20000000307D010000800000000100001C1821
+:104C3000001000000000000400001C300010000004
+:104C40000000000400001C380010000000000004F8
+:104C50008000000000000000000000008000000054
+:104C600000000000000000008000000000000000C4
+:104C700000000000800000000000000000000000B4
+:104C800000004C10000800000000000200004C1260
+:104C9000000800000000000200004C1400080000A2
+:104CA0000000000400004C20000800000000000884
+:104CB00000004C30004000080000000800004C00DC
+:104CC000000800000000000200004C020008000084
+:104CD0000000000100004C04000800000000000279
+:104CE00000004CD0000800000000000800004CE06C
+:104CF000000800000000000400004CE40008000070
+:104D00000000000100004CF000080000000000025C
+:104D100000004CF4000800000000000200004D00FC
+:104D20000008000000000004000050000010000017
+:104D30000000000400005004001000000000000407
+:104D400000005008001000000000000400001400E3
+:104D5000000800000000000200001402000800002B
+:104D60000000000100001404000800000000000220
+:104D700000001410000800000000000200001414DD
+:104D800000080000000000020000141600080000E7
+:104D900000000002000019B8000800000000000830
+:104DA000000014200008000000000002000014248D
+:104DB0000008000000000002000019C80008000000
+:104DC0000000000800002C10000800000000000196
+:104DD00000002C11000800000000000100002C124F
+:104DE000000800000000000100002C130008000073
+:104DF0000000000100002C0000080000000000027C
+:104E000000002C02000800000000000100002C043B
+:104E1000000800000000000200002C300008000024
+:104E20000000000200002C32000800000000000218
+:104E300000002C34000800000000000200002C20BC
+:104E4000000800000000000100002C210008000004
+:104E50000000000100002C220008000000000001FA
+:104E600000002C23000800000000000100002C249A
+:104E7000000800000000000100002C2500080000D0
+:104E80000000000100002C260008000000000001C6
+:104E900000001400000800000000000200001402DE
+:104EA00000080000000000010000140400080000D9
+:104EB000000000020000141200C0001800000002F0
+:104EC0000000141000C00018000000020000141CB4
+:104ED00000C00018000000080000141400C00018F2
+:104EE000000000080000142700C0001800000001A6
+:104EF0000000142400C00018000000020000142666
+:104F000000C000180000000100001590000800001B
+:104F100000000008000015A00008000000000008C4
+:104F2000000015B00008000000000008800000002C
+:104F300000000000000000008000000000000000F1
+:104F400000000000800000000000000000000000E1
+:104F50008000000000000000000000008000000051
+:104F600000000000000000008000000000000000C1
+:104F700000000000800000000000000000000000B1
+:104F80008000000000000000000000008000000021
+:104F90000000000000000000800000000000000091
+:104FA0000000000080000000000000000000000081
+:104FB00080000000000000000000000080000000F1
+:104FC0000000000000000000800000000000000061
+:104FD0000000000080000000000000000000000051
+:104FE00080000000000000000000000080000000C1
+:104FF0000000000000000000800000000000000031
+:105000000000000080000000000000000000000020
+:105010008000000000000000000000008000000090
+:105020000000000000000000800000000000000000
+:1050300000000000800000000000000000000000F0
+:105040008000000000000000000000008000000060
+:1050500000000000000000008000000000000000D0
+:105060000000000000000000000000000000000040
+:1050700080000000000000000000000000000000B0
+:08508000060209000000000017
+:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex
deleted file mode 100644
index 5f04df6..0000000
--- a/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex
+++ /dev/null
@@ -1,13181 +0,0 @@
-:1000000000004F48000000680000070C00004FB8D7
-:1000100000001ED4000056C800000094000075A027
-:1000200000009F4C00007638000000CC00011588CD
-:100030000000DC4C00011658000000940001F2A8FA
-:10004000000040000001F340000000A4000233481B
-:100050000000F38C000233F000000FFC0003278047
-:100060000000000400033780020400480000000F75
-:1000700002040054000000450204005C0000000679
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:10018000020400140000007F02040018000000FFB9
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200604203C0000001FBB
-:10024000020420B800000001060420BC0000005F8A
-:100250000204223807FFFFFF0204223C0000003F97
-:100260000204224007FFFFFF020422440000000FA7
-:1002700001042248000000000104224C000000009C
-:10028000010422500000000001042254000000007C
-:1002900001042258000000000104225C000000005C
-:1002A000010422600000000001042264000000003C
-:1002B00001042268000000000104226C000000001C
-:1002C00001042270000000000104227400000000FC
-:1002D00001042278000000000104227C00000000DC
-:1002E0000C042000000003E80A04200000000001C4
-:1002F0000B0420000000000A0605400000000D006D
-:100300000205004400000020020500480000003201
-:10031000020500900215002002050094021500203D
-:1003200002050098000000300205009C0810000043
-:10033000020500A000000033020500A40000003008
-:10034000020500A800000031020500AC0000000218
-:10035000020500B000000005020500B40000000620
-:10036000020500B800000002020500BC0000000207
-:10037000020500C000000000020500C400000005E6
-:10038000020500C800000002020500CC00000002C7
-:10039000020500D000000002020500D400000001A8
-:1003A00002050114000000010205011C000000010B
-:1003B0000205012000000002020502040000000105
-:1003C0000205020C0000004002050210000000407F
-:1003D0000205021C0000002002050220000000139C
-:1003E0000205022400000020060502400000000A69
-:1003F00004050280002000000205005000000007F4
-:10040000020500540000000702050058000000002B
-:100410000205005C00000008020500600000000109
-:100420000605006400000003020500D80000000675
-:1004300002050004000000010205000800000001A0
-:100440000205000C00000001020500100000000180
-:100450000205001400000001020500180000000160
-:100460000205001C00000001020500200000000140
-:100470000205002400000001020500280000000120
-:100480000205002C00000001020500300000000100
-:1004900002050034000000010205003800000001E0
-:1004A0000205003C000000010205004000000001C0
-:1004B000020500E00000000D020500E80000000059
-:1004C000020500F000000000020500F80000000036
-:1004D000020500E40000002D020500EC00000020F1
-:1004E000020500F400000020020500FC00000020CE
-:1004F000020500E00000001D020500E800000010F9
-:10050000020500F000000010020500F800000010D5
-:10051000020500E40000003D020500EC0000003090
-:10052000020500F400000030020500FC000000306D
-:10053000020500E00000004D020500E80000004058
-:10054000020500F000000040020500F80000004035
-:10055000020500E40000006D020500EC00000060F0
-:10056000020500F400000060020500FC00000060CD
-:10057000020500E00000005D020500E800000050F8
-:10058000020500F000000050020500F800000050D5
-:10059000020500E40000007D020500EC0000007090
-:1005A000020500F400000070020500FC000000706D
-:1005B0000406100002000020020600DC000000011A
-:1005C000010600D80000000004060200000302201B
-:1005D000020600DC00000000010600B80000000078
-:1005E000010600C8000000000206016C00000000C7
-:1005F000010600BC00000000010600CC0000000065
-:1006000002060170000000000718040000910000BD
-:10061000081807D800050223071C00002BF700006C
-:10062000071C80002DD10AFE071D00002F461673FF
-:10063000071D800016342245081DB13049DA022515
-:100640000118000000000000011800040000000074
-:1006500001180008000000000118000C0000000054
-:100660000118001000000000011800140000000034
-:1006700002180020000000010218002400000002FF
-:1006800002180028000000030218002C00000000DF
-:1006900002180030000000040218003400000001BD
-:1006A00002180038000000000218003C00000001A1
-:1006B000021800400000000402180044000000007E
-:1006C00002180048000000010218004C000000035E
-:1006D0000218005000000000021800540000000141
-:1006E00002180058000000040218005C000000001E
-:1006F00002180060000000010218006400000003FE
-:1007000002180068000000000218006C00000001E0
-:1007100002180070000000040218007400000000BD
-:1007200002180078000000040218007C000000039A
-:100730000618008000000002021800A400003FFF1D
-:10074000021800A8000003FF0218022400000000A5
-:1007500002180234000000000218024C00000000E1
-:10076000021802E4000000FF061810000000040058
-:10077000021B8BC000000001021B8000000000343F
-:10078000021B804000000018021B80800000000C4B
-:10079000021B80C0000000200C1B83000007A1206A
-:1007A0000A1B8300000001380B1B83000000138824
-:1007B0000A1B8340000000000C1B8340000001F472
-:1007C0000B1B834000000005021B83800007A12053
-:1007D000021B83C0000001F4021B14800000000112
-:1007E0000A1B148000000000061A1000000003B36A
-:1007F000041A1ECC00010227061A1ED000000008B1
-:10080000061A2008000000C8061A20000000000296
-:10081000041AAF4000100228061A3718000000041E
-:10082000061A371000000002061A500000000002ED
-:10083000061A500800000004061A501800000004B0
-:10084000061A502800000004061A50380000000460
-:10085000061A504800000004061A50580000000410
-:10086000061A506800000004061A507800000002C2
-:10087000041A52C000020238061A40500000000656
-:10088000041A40680002023A041A40400004023C84
-:10089000041A800000010240061A800400000003D0
-:1008A000041A801000010241061A8014000000039F
-:1008B000041A802000010242061A8024000000036E
-:1008C000041A803000010243061A8034000000033D
-:1008D000041A804000010244061A8044000000030C
-:1008E000041A805000010245061A805400000003DB
-:1008F000041A806000010246061A806400000003AA
-:10090000041A807000010247061A80740000000378
-:10091000041A808000010248061A80840000000347
-:10092000041A809000010249061A80940000000316
-:10093000041A80A00001024A061A80A400000003E5
-:10094000041A80B00001024B061A80B400000003B4
-:10095000041A80C00001024C061A80C40000000383
-:10096000041A80D00001024D061A80D40000000352
-:10097000041A80E00001024E061A80E40000000321
-:10098000041A80F00001024F061A80F400000003F0
-:10099000041A810000010250061A810400000003BD
-:1009A000041A811000010251061A8114000000038C
-:1009B000041A812000010252061A8124000000035B
-:1009C000041A813000010253061A8134000000032A
-:1009D000041A814000010254061A814400000003F9
-:1009E000041A815000010255061A815400000003C8
-:1009F000041A816000010256061A81640000000397
-:100A0000041A817000010257061A81740000000365
-:100A1000041A818000010258061A81840000000334
-:100A2000041A819000010259061A81940000000303
-:100A3000041A81A00001025A061A81A400000003D2
-:100A4000041A81B00001025B061A81B400000003A1
-:100A5000041A81C00001025C061A81C40000000370
-:100A6000041A81D00001025D061A81D4000000033F
-:100A7000041A81E00001025E061A81E4000000030E
-:100A8000041A81F00001025F061A81F400000003DD
-:100A9000041A820000010260061A820400000003AA
-:100AA000041A821000010261061A82140000000379
-:100AB000041A822000010262061A82240000000348
-:100AC000041A823000010263061A82340000000317
-:100AD000041A824000010264061A824400000003E6
-:100AE000041A825000010265061A825400000003B5
-:100AF000041A826000010266061A82640000000384
-:100B0000041A827000010267061A82740000000352
-:100B1000041A828000010268061A82840000000321
-:100B2000041A829000010269061A829400000003F0
-:100B3000041A82A00001026A061A82A400000003BF
-:100B4000041A82B00001026B061A82B4000000038E
-:100B5000041A82C00001026C061A82C4000000035D
-:100B6000041A82D00001026D061A82D4000000032C
-:100B7000041A82E00001026E061A82E400000003FB
-:100B8000041A82F00001026F061A82F400000003CA
-:100B9000041A830000010270061A83040000000397
-:100BA000041A831000010271061A83140000000366
-:100BB000041A832000010272061A83240000000335
-:100BC000041A833000010273061A83340000000304
-:100BD000041A834000010274061A834400000003D3
-:100BE000041A835000010275061A835400000003A2
-:100BF000041A836000010276061A83640000000371
-:100C0000041A837000010277061A8374000000033F
-:100C1000041A838000010278061A8384000000030E
-:100C2000041A839000010279061A839400000003DD
-:100C3000041A83A00001027A061A83A400000003AC
-:100C4000041A83B00001027B061A83B4000000037B
-:100C5000041A83C00001027C061A83C4000000034A
-:100C6000041A83D00001027D061A83D40000000319
-:100C7000041A83E00001027E061A83E400000003E8
-:100C8000041A83F00001027F061A83F400000003B7
-:100C9000041A840000010280061A84040000000384
-:100CA000041A841000010281061A84140000000353
-:100CB000041A842000010282061A84240000000322
-:100CC000041A843000010283061A843400000003F1
-:100CD000041A844000010284061A844400000003C0
-:100CE000041A845000010285061A8454000000038F
-:100CF000041A846000010286061A8464000000035E
-:100D0000041A847000010287061A8474000000032C
-:100D1000041A848000010288061A848400000003FB
-:100D2000041A849000010289061A849400000003CA
-:100D3000041A84A00001028A061A84A40000000399
-:100D4000041A84B00001028B061A84B40000000368
-:100D5000041A84C00001028C061A84C40000000337
-:100D6000041A84D00001028D061A84D40000000306
-:100D7000041A84E00001028E061A84E400000003D5
-:100D8000041A84F00001028F061A84F400000003A4
-:100D9000041A850000010290061A85040000000371
-:100DA000041A851000010291061A85140000000340
-:100DB000041A852000010292061A8524000000030F
-:100DC000041A853000010293061A853400000003DE
-:100DD000041A854000010294061A854400000003AD
-:100DE000041A855000010295061A8554000000037C
-:100DF000041A856000010296061A8564000000034B
-:100E0000041A857000010297061A85740000000319
-:100E1000041A858000010298061A858400000003E8
-:100E2000041A859000010299061A859400000003B7
-:100E3000041A85A00001029A061A85A40000000386
-:100E4000041A85B00001029B061A85B40000000355
-:100E5000041A85C00001029C061A85C40000000324
-:100E6000041A85D00001029D061A85D400000003F3
-:100E7000041A85E00001029E061A85E400000003C2
-:100E8000041A85F00001029F061A85F40000000391
-:100E9000041A8600000102A0061A8604000000035E
-:100EA000041A8610000102A1061A8614000000032D
-:100EB000041A8620000102A2061A862400000003FC
-:100EC000041A8630000102A3061A863400000003CB
-:100ED000041A8640000102A4061A8644000000039A
-:100EE000041A8650000102A5061A86540000000369
-:100EF000041A8660000102A6061A86640000000338
-:100F0000041A8670000102A7061A86740000000306
-:100F1000041A8680000102A8061A868400000003D5
-:100F2000041A8690000102A9061A869400000003A4
-:100F3000041A86A0000102AA061A86A40000000373
-:100F4000041A86B0000102AB061A86B40000000342
-:100F5000041A86C0000102AC061A86C40000000311
-:100F6000041A86D0000102AD061A86D400000003E0
-:100F7000041A86E0000102AE061A86E400000003AF
-:100F8000041A86F0000102AF061A86F4000000037E
-:100F9000041A8700000102B0061A8704000000034B
-:100FA000041A8710000102B1061A8714000000031A
-:100FB000041A8720000102B2061A872400000003E9
-:100FC000041A8730000102B3061A873400000003B8
-:100FD000041A8740000102B4061A87440000000387
-:100FE000041A8750000102B5061A87540000000356
-:100FF000041A8760000102B6061A87640000000325
-:10100000041A8770000102B7061A877400000003F3
-:10101000041A8780000102B8061A878400000003C2
-:10102000041A8790000102B9061A87940000000391
-:10103000041A87A0000102BA061A87A40000000360
-:10104000041A87B0000102BB061A87B4000000032F
-:10105000041A87C0000102BC061A87C400000003FE
-:10106000041A87D0000102BD061A87D400000003CD
-:10107000041A87E0000102BE061A87E4000000039C
-:10108000041A87F0000102BF061A87F4000000036B
-:10109000041A8800000102C0061A88040000000338
-:1010A000041A8810000102C1061A88140000000307
-:1010B000041A8820000102C2061A882400000003D6
-:1010C000041A8830000102C3061A883400000003A5
-:1010D000041A8840000102C4061A88440000000374
-:1010E000041A8850000102C5061A88540000000343
-:1010F000041A8860000102C6061A88640000000312
-:10110000041A8870000102C7061A887400000003E0
-:10111000041A8880000102C8061A888400000003AF
-:10112000041A8890000102C9061A8894000000037E
-:10113000041A88A0000102CA061A88A4000000034D
-:10114000041A88B0000102CB061A88B4000000031C
-:10115000041A88C0000102CC061A88C400000003EB
-:10116000041A88D0000102CD061A88D400000003BA
-:10117000041A88E0000102CE061A88E40000000389
-:10118000041A88F0000102CF061A88F40000000358
-:10119000041A8900000102D0061A89040000000325
-:1011A000041A8910000102D1061A891400000003F4
-:1011B000041A8920000102D2061A892400000003C3
-:1011C000041A8930000102D3061A89340000000392
-:1011D000041A8940000102D4061A89440000000361
-:1011E000041A8950000102D5061A89540000000330
-:1011F000041A8960000102D6061A896400000003FF
-:10120000041A8970000102D7061A897400000003CD
-:10121000041A8980000102D8061A8984000000039C
-:10122000041A8990000102D9061A8994000000036B
-:10123000041A89A0000102DA061A89A4000000033A
-:10124000041A89B0000102DB061A89B40000000309
-:10125000041A89C0000102DC061A89C400000003D8
-:10126000041A89D0000102DD061A89D400000003A7
-:10127000041A89E0000102DE061A89E40000000376
-:10128000041A89F0000102DF061A89F40000000345
-:10129000041A8A00000102E0061A8A040000000312
-:1012A000041A8A10000102E1061A8A1400000003E1
-:1012B000041A8A20000102E2061A8A2400000003B0
-:1012C000041A8A30000102E3061A8A34000000037F
-:1012D000041A8A40000102E4061A8A44000000034E
-:1012E000041A8A50000102E5061A8A54000000031D
-:1012F000041A8A60000102E6061A8A6400000003EC
-:10130000041A8A70000102E7061A8A7400000003BA
-:10131000041A8A80000102E8061A8A840000000389
-:10132000041A8A90000102E9061A8A940000000358
-:10133000041A8AA0000102EA061A8AA40000000327
-:10134000041A8AB0000102EB061A8AB400000003F6
-:10135000041A8AC0000102EC061A8AC400000003C5
-:10136000041A8AD0000102ED061A8AD40000000394
-:10137000041A8AE0000102EE061A8AE40000000363
-:10138000041A8AF0000102EF061A8AF40000000332
-:10139000041A8B00000102F0061A8B0400000003FF
-:1013A000041A8B10000102F1061A8B1400000003CE
-:1013B000041A8B20000102F2061A8B24000000039D
-:1013C000041A8B30000102F3061A8B34000000036C
-:1013D000041A8B40000102F4061A8B44000000033B
-:1013E000041A8B50000102F5061A8B54000000030A
-:1013F000041A8B60000102F6061A8B6400000003D9
-:10140000041A8B70000102F7061A8B7400000003A7
-:10141000041A8B80000102F8061A8B840000000376
-:10142000041A8B90000102F9061A8B940000000345
-:10143000041A8BA0000102FA061A8BA40000000314
-:10144000041A8BB0000102FB061A8BB400000003E3
-:10145000041A8BC0000102FC061A8BC400000003B2
-:10146000041A8BD0000102FD061A8BD40000000381
-:10147000041A8BE0000102FE061A8BE40000000350
-:10148000041A8BF0000102FF061A8BF4000000031F
-:10149000041A8C0000010300061A8C0400000003EB
-:1014A000041A8C1000010301061A8C1400000003BA
-:1014B000041A8C2000010302061A8C240000000389
-:1014C000041A8C3000010303061A8C340000000358
-:1014D000041A8C4000010304061A8C440000000327
-:1014E000041A8C5000010305061A8C5400000003F6
-:1014F000041A8C6000010306061A8C6400000003C5
-:10150000041A8C7000010307061A8C740000000393
-:10151000041A8C8000010308061A8C840000000362
-:10152000041A8C9000010309061A8C940000000331
-:10153000041A8CA00001030A061A8CA40000000300
-:10154000041A8CB00001030B061A8CB400000003CF
-:10155000041A8CC00001030C061A8CC4000000039E
-:10156000041A8CD00001030D061A8CD4000000036D
-:10157000041A8CE00001030E061A8CE4000000033C
-:10158000041A8CF00001030F061A8CF4000000030B
-:10159000041A8D0000010310061A8D0400000003D8
-:1015A000041A8D1000010311061A8D1400000003A7
-:1015B000041A8D2000010312061A8D240000000376
-:1015C000041A8D3000010313061A8D340000000345
-:1015D000041A8D4000010314061A8D440000000314
-:1015E000041A8D5000010315061A8D5400000003E3
-:1015F000041A8D6000010316061A8D6400000003B2
-:10160000041A8D7000010317061A8D740000000380
-:10161000041A8D8000010318061A8D84000000034F
-:10162000041A8D9000010319061A8D94000000031E
-:10163000041A8DA00001031A061A8DA400000003ED
-:10164000041A8DB00001031B061A8DB400000003BC
-:10165000041A8DC00001031C061A8DC4000000038B
-:10166000041A8DD00001031D061A8DD4000000035A
-:10167000041A8DE00001031E061A8DE40000000329
-:10168000041A8DF00001031F061A8DF400000003F8
-:10169000041A8E0000010320061A8E0400000003C5
-:1016A000041A8E1000010321061A8E140000000394
-:1016B000041A8E2000010322061A8E240000000363
-:1016C000041A8E3000010323061A8E340000000332
-:1016D000041A8E4000010324061A8E440000000301
-:1016E000041A8E5000010325061A8E5400000003D0
-:1016F000041A8E6000010326061A8E64000000039F
-:10170000041A8E7000010327061A8E74000000036D
-:10171000041A8E8000010328061A8E84000000033C
-:10172000041A8E9000010329061A8E94000000030B
-:10173000041A8EA00001032A061A8EA400000003DA
-:10174000041A8EB00001032B061A8EB400000003A9
-:10175000041A8EC00001032C061A8EC40000000378
-:10176000041A8ED00001032D061A8ED40000000347
-:10177000041A8EE00001032E061A8EE40000000316
-:10178000041A8EF00001032F061A8EF400000003E5
-:10179000041A8F0000010330061A8F0400000003B2
-:1017A000041A8F1000010331061A8F140000000381
-:1017B000041A8F2000010332061A8F240000000350
-:1017C000041A8F3000010333061A8F34000000031F
-:1017D000041A8F4000010334061A8F4400000003EE
-:1017E000041A8F5000010335061A8F5400000003BD
-:1017F000041A8F6000010336061A8F64000000038C
-:10180000041A8F7000010337061A8F74000000035A
-:10181000041A8F8000010338061A8F840000000329
-:10182000041A8F9000010339061A8F9400000003F8
-:10183000041A8FA00001033A061A8FA400000003C7
-:10184000041A8FB00001033B061A8FB40000000396
-:10185000041A8FC00001033C061A8FC40000000365
-:10186000041A8FD00001033D061A8FD40000000334
-:10187000041A8FE00001033E061A8FE400000007FF
-:10188000041A62C00020033F061AD0000000007254
-:10189000061AD24800000010061AD6B00000002038
-:1018A000061AD47000000090061AD46800000002E6
-:1018B000061AA000000001C4061A30000000001043
-:1018C000061A308000000010061A310000000010D7
-:1018D000061A318000000010061A330000000012C2
-:1018E000061A339000000070061AD4580000000257
-:1018F000061AD34800000002061AD3580000002040
-:10190000061AA710000001C4061A3040000000109B
-:10191000061A30C000000010061A31400000001006
-:10192000061A31C000000010061A334800000012E9
-:10193000061A355000000070061AD460000000023C
-:10194000061AD35000000002061AD3D80000002067
-:10195000021AAE2000000000061A5000000000022B
-:10196000061A508000000012041A40000002035FB3
-:10197000041A63C000020361061A7000000000042C
-:10198000061A320000000008021AAE24000000000F
-:10199000061A501000000002061A50C8000000127B
-:1019A000041A400800020363041A63C800020365B6
-:1019B000061A701000000004061A32200000000809
-:1019C000021AAE2800000000061A50200000000293
-:1019D000061A511000000012041A4010000203679A
-:1019E000041A63D000020369061A70200000000484
-:1019F000061A324000000008021AAE2C0000000057
-:101A0000061A503000000002061A51580000001259
-:101A1000041A40180002036B041A63D80002036D15
-:101A2000061A703000000004061A32600000000838
-:101A3000021AAE3000000000061A504000000002FA
-:101A4000061A51A000000012041A40200002036F81
-:101A5000041A63E000020371061A704000000004DB
-:101A6000061A328000000008021AAE34000000009E
-:101A7000061A505000000002061A51E80000001239
-:101A8000041A402800020373041A63E80002037575
-:101A9000061A705000000004061A32A00000000868
-:101AA000021AAE3800000000061A50600000000262
-:101AB000061A523000000012041A40300002037768
-:101AC000041A63F000020379061A70600000000433
-:101AD000061A32C000000008021AAE3C00000000E6
-:101AE000061A507000000002061A52780000001218
-:101AF000041A40380002037B041A63F80002037DD5
-:101B0000061A707000000004061A32E00000000897
-:101B10000200A468000B01C80200A294071D29114D
-:101B20000200A298000000000200A29C009C042475
-:101B30000200A2A0000000000200A2A4000002090E
-:101B40000200A270000000000200A2740000000069
-:101B50000200A270000000000200A2740000000059
-:101B60000200A270000000000200A2740000000049
-:101B70000200A270000000000200A2740000000039
-:101B8000020160A000000001020160A400000262E6
-:101B9000020160A800000002020160AC0000001811
-:101BA0000201620400000001020100B40000000113
-:101BB000020100B800000001020100DC0000000189
-:101BC0000201010000000001020101040000000107
-:101BD0000201007C003000000201008400000028A7
-:101BE0000201008C0000000002010130000000042E
-:101BF0000201025C00000001020103280000000055
-:101C0000020160580000FFFF020160700000000741
-:101C10000201608000000001020105540000003054
-:101C2000020100C400000001020100CC000000011C
-:101C3000020100F800000001020100F000000001B4
-:101C4000020100800030000002010088000000282E
-:101C500002010090000000000201013400000004B5
-:101C6000020102DC000000010201032C0000000060
-:101C70000201605C0000FFFF0201607400000007C9
-:101C800002016084000000010201056400000030D0
-:101C9000020100C800000001020100D000000001A4
-:101CA000020100FC00000001020100F4000000013C
-:101CB000020C100000000028020C20080000021195
-:101CC000020C200C00000200020C20100000020494
-:101CD000020C201C0000FFFF020C20200000FFFF70
-:101CE000020C20240000FFFF020C20280000FFFF50
-:101CF000020C203800000020020C203C00000021D3
-:101D0000020C204000000022020C204400000023AE
-:101D1000020C204800000024020C204C000000258A
-:101D2000020C205000000026020C20540000002766
-:101D3000020C205800000028020C205C0000002942
-:101D4000020C20600000002A020C20640000002B1E
-:101D5000020C20680000002C020C206C0000002DFA
-:101D6000020C20700000002E020C20740000002FD6
-:101D7000020C207800000010060C207C00000007F8
-:101D8000020C209800000011020C209C00000012A0
-:101D9000020C20A000000013060C20A40000001D6F
-:101DA000020C211800000001020C211C000000019F
-:101DB000020C212000000001060C21240000001D5F
-:101DC000020C219800000001060C219C0000000775
-:101DD000020C21B800000001020C21BC000000012F
-:101DE000020C21C000000001020C21C4000000010F
-:101DF000020C21C800000001020C21CC00000001EF
-:101E0000020C21D000000001020C21D400000001CE
-:101E1000020C21D800000001020C21DC00000001AE
-:101E2000020C21E000000001020C21E4000000018E
-:101E3000020C21E800000001020C21EC000000016E
-:101E4000020C21F000000001020C21F4000000014E
-:101E5000020C21F800000001060C21FC0000000724
-:101E6000020C221800000001060C221C00000007D2
-:101E7000020C223807FFFFFF020C223C0000003F4B
-:101E8000020C224007FFFFFF020C22440000000F5B
-:101E9000010C224800000000010C224C0000000050
-:101EA000010C225000000000010C22540000000030
-:101EB000010C225800000000010C225C0000000010
-:101EC000010C226000000000010C226400000000F0
-:101ED000010C226800000000010C226C00000000D0
-:101EE000010C227000000000010C227400000000B0
-:101EF000010C227800000000010C227C0000000090
-:101F00000C0C2000000003E80A0C20000000000177
-:101F10000B0C20000000000A020C40080000101109
-:101F2000020C400C00001000020C401000001004D5
-:101F3000020C401400001021020C401C0000FFFFA6
-:101F4000020C40200000FFFF020C40240000FFFFB5
-:101F5000020C40280000FFFF020C40380000004641
-:101F6000020C403C00000010060C40400000000243
-:101F7000020C404800000018020C404C000000F029
-:101F8000060C40500000001F020C40CC0000000175
-:101F9000060C40D00000003A020C41B800000001DD
-:101FA000060C41BC00000003020C41C80000000107
-:101FB000020C41CC00000001060C41D00000001AC8
-:101FC000020C423807FFFFFF020C423C0000003FBA
-:101FD000020C424007FFFFFF020C42440000000FCA
-:101FE000010C424800000000010C424C00000000BF
-:101FF000010C425000000000010C4254000000009F
-:10200000010C425800000000010C425C000000007E
-:10201000010C426000000000010C4264000000005E
-:10202000010C426800000000010C426C000000003E
-:10203000010C427000000000010C4274000000001E
-:10204000010C427800000000010C427C00000000FE
-:10205000010C4280000000000C0C4000000003E86E
-:102060000A0C4000000000010B0C40000000000AB8
-:10207000060D400000000A00020D0044000000327E
-:10208000020D008C02150020020D009002150020A8
-:10209000020D009408100000020D009800000033AB
-:1020A000020D009C00000002020D00A000000000D4
-:1020B000020D00A400000005020D00A800000005AC
-:1020C000060D00AC00000002020D00B4000000028A
-:1020D000020D00B800000003020D00BC0000000269
-:1020E000020D00C000000001020D00C80000000247
-:1020F000020D00CC00000002020D015C0000000196
-:10210000020D016400000001020D016800000002E0
-:10211000020D020400000001020D020C000000206C
-:10212000020D021000000040020D021400000040E9
-:10213000020D022000000003020D0224000000181E
-:10214000060D028000000012040D03000018037F3A
-:10215000060D03600000000C020D004C00000001A1
-:10216000020D005000000002020D005400000000AB
-:10217000020D005800000008060D005C000000047D
-:10218000020D00C400000004020D00040000000164
-:10219000020D000800000001020D000C000000010B
-:1021A000020D001000000001020D001400000001EB
-:1021B000020D001800000001020D001C00000001CB
-:1021C000020D002000000001020D002400000001AB
-:1021D000020D002800000001020D002C000000018B
-:1021E000020D003000000001020D0034000000016B
-:1021F000020D003800000001020D003C000000014B
-:10220000020D011400000009020D011C0000000A6B
-:10221000020D012400000000020D012C000000004E
-:10222000020D013400000000020D013C0000000B13
-:10223000020D014400000000020D011800000029F9
-:10224000020D01200000002A020D012800000020DC
-:10225000020D013000000020020D013800000020B6
-:10226000020D01400000002B020D0148000000207B
-:10227000020D011400000019020D011C0000001ADB
-:10228000020D012400000010020D012C00000010BE
-:10229000020D013400000010020D013C0000001B83
-:1022A000020D014400000010020D01180000003969
-:1022B000020D01200000003A020D0128000000304C
-:1022C000020D013000000030020D01380000003026
-:1022D000020D01400000003B020D014800000030EB
-:1022E000020D011400000049020D011C0000004A0B
-:1022F000020D012400000040020D012C00000040EE
-:10230000020D013400000040020D013C0000004BB2
-:10231000020D014400000040020D01180000006998
-:10232000020D01200000006A020D0128000000607B
-:10233000020D013000000060020D01380000006055
-:10234000020D01400000006B020D0148000000601A
-:10235000020D011400000059020D011C0000005A7A
-:10236000020D012400000050020D012C000000505D
-:10237000020D013400000050020D013C0000005B22
-:10238000020D014400000050020D01180000007908
-:10239000020D01200000007A020D012800000070EB
-:1023A000020D013000000070020D013800000070C5
-:1023B000020D01400000007B020D0148000000708A
-:1023C000060E200000000800020E004C0000003243
-:1023D000020E009402150020020E00980215002043
-:1023E000020E009C00000030020E00A00810000049
-:1023F000020E00A400000033020E00A8000000300E
-:10240000020E00AC00000031020E00B0000000021D
-:10241000020E00B400000004020E00B8000000002C
-:10242000020E00BC00000002020E00C0000000020C
-:10243000020E00C400000000020E00C800000002EE
-:10244000020E00CC00000007020E00D000000002C7
-:10245000020E00D400000002020E00D800000001AD
-:10246000020E014400000001020E014C00000001B8
-:10247000020E015000000002020E020400000001E2
-:10248000020E020C00000040020E0210000000408C
-:10249000020E021C00000004020E022000000020B8
-:1024A000020E02240000000E020E02280000001B93
-:1024B000060E030000000012040E0280001B0397AA
-:1024C000060E02EC00000005020E00540000000C95
-:1024D000020E00580000000C020E005C000000001C
-:1024E000020E006000000010020E006400000010E8
-:1024F000060E006800000003020E00DC000000036E
-:10250000020E000400000001020E0008000000019D
-:10251000020E000C00000001020E0010000000017D
-:10252000020E001400000001020E0018000000015D
-:10253000020E001C00000001020E0020000000013D
-:10254000020E002400000001020E0028000000011D
-:10255000020E002C00000001020E003000000001FD
-:10256000020E003400000001020E003800000001DD
-:10257000020E003C00000001020E004000000001BD
-:10258000020E004400000001020E01100000000FC6
-:10259000020E011800000000020E012000000000E1
-:1025A000020E012800000000020E01140000002F9E
-:1025B000020E011C00000020020E01240000000099
-:1025C000020E012C00000000020E01100000001F8E
-:1025D000020E011800000010020E01200000000091
-:1025E000020E012800000000020E01140000003F4E
-:1025F000020E011C00000030020E01240000000049
-:10260000020E012C00000000020E01100000004F1D
-:10261000020E011800000040020E01200000000020
-:10262000020E012800000000020E01140000006FDD
-:10263000020E011C00000060020E012400000000D8
-:10264000020E012C00000000020E01100000005FCD
-:10265000020E011800000050020E012000000000D0
-:10266000020E012800000000020E01140000007F8D
-:10267000020E011C00000070020E01240000000088
-:10268000020E012C000000000730040000C9000009
-:10269000083007D8000503B20734000033320000C9
-:1026A0000734800030A70CCD07350000353518F70A
-:1026B000073580002A6226450736000018D330DE31
-:1026C00008364660373403B40130000000000000D3
-:1026D000013000040000000001300008000000008C
-:1026E0000130000C0000000001300010000000006C
-:1026F0000130001400000000023000200000000142
-:102700000230002400000002023000280000000314
-:102710000230002C000000000230003000000004F5
-:1027200002300034000000010230003800000000D8
-:102730000230003C000000010230004000000004B4
-:102740000230004400000000023000480000000198
-:102750000230004C00000003023000500000000076
-:102760000230005400000001023000580000000454
-:102770000230005C00000000023000600000000138
-:102780000230006400000003023000680000000016
-:102790000230006C000000010230007000000004F4
-:1027A00002300074000000000230007800000004D5
-:1027B0000230007C000000030630008000000002B0
-:1027C000023000A400003FFF023000A8000003FF19
-:1027D0000230022400000000023002340000000039
-:1027E0000230024C00000000023002E40000FFFF53
-:1027F000063020000000080002338BC000000001FA
-:10280000023380000000001A023380400000004EB6
-:102810000233808000000010023380C000000020DE
-:102820000C3383000007A1200A3383000000013825
-:102830000B338300000013880A338340000000003C
-:102840000C338340000001F40B338340000000058B
-:10285000023383800007A120023383C0000001F40B
-:1028600002331480000000010A33148000000000CD
-:10287000063280000000010206322008000000C875
-:10288000063220000000000204328EA0001003B6C1
-:1028900006323EB00000000606323ED800000002BC
-:1028A00006323E800000000A04323EA8000203C641
-:1028B00006323E00000000200632500000000400F6
-:1028C0000632400000000004043274C0000203C855
-:1028D00006324110000000020632D0000000003035
-:1028E0000632DD40000000440632DA00000000D06D
-:1028F0000632DEA0000000020632E0000000080000
-:1029000006328450000001180632100000000188D1
-:102910000632500000000020063251000000002066
-:102920000632520000000020063253000000002052
-:10293000063254000000002006325500000000203E
-:10294000063256000000002006325700000000202A
-:102950000632580000000020063259000000002016
-:1029600006325A000000002006325B000000002002
-:1029700006325C000000002006325D0000000020EE
-:1029800006325E000000002006325F0000000020DA
-:1029900006328DF00000000204328E00000203CAED
-:1029A00006328E08000000020632DE9000000002AF
-:1029B00006321C4000000038063288B000000118C2
-:1029C00006321620000001880632508000000020E8
-:1029D00006325180000000200632528000000020A4
-:1029E0000632538000000020063254800000002090
-:1029F000063255800000002006325680000000207C
-:102A00000632578000000020063258800000002067
-:102A1000063259800000002006325A800000002053
-:102A200006325B800000002006325C80000000203F
-:102A300006325D800000002006325E80000000202B
-:102A400006325F800000002006328DF80000000290
-:102A500004328E10000203CC06328E1800000002F1
-:102A60000632DE980000000206321D200000003809
-:102A700002328D50000000000632401000000002BB
-:102A800002328D5400000000063240200000000297
-:102A900002328D5800000000063240300000000273
-:102AA00002328D5C0000000006324040000000024F
-:102AB00002328D600000000006324050000000022B
-:102AC00002328D6400000000063240600000000207
-:102AD00002328D68000000000632407000000002E3
-:102AE00002328D6C000000000632408000000002BF
-:102AF000072004000091000008200780001003CE8A
-:102B0000072400002AF300000724800015090ABDED
-:102B10000824A9F0692803D001200000000000006B
-:102B20000120000400000000012000080000000057
-:102B30000120000C00000000012000100000000037
-:102B4000012000140000000002200020000000010D
-:102B500002200024000000020220002800000003E0
-:102B60000220002C000000000220003000000004C1
-:102B700002200034000000010220003800000000A4
-:102B80000220003C00000001022000400000000480
-:102B90000220004400000000022000480000000164
-:102BA0000220004C00000003022000500000000042
-:102BB0000220005400000001022000580000000420
-:102BC0000220005C00000000022000600000000104
-:102BD00002200064000000030220006800000000E2
-:102BE0000220006C000000010220007000000004C0
-:102BF00002200074000000000220007800000004A1
-:102C00000220007C0000000306200080000000027B
-:102C1000022000A400003FFF022000A8000003FFE4
-:102C20000220022400000000022002340000000004
-:102C30000220024C00000000022002E40000FFFF1E
-:102C4000062020000000080002238BC000000001C5
-:102C500002238000000000100223804000000012C8
-:102C60000223808000000030022380C00000000E9C
-:102C70000C2383000007A1200A23830000000138F1
-:102C80000B238300000013880A2383400000000008
-:102C90000C238340000001F40B2383400000000557
-:102CA000022383800007A120022383C0000001F4D7
-:102CB00002231480000000010A2314800000000099
-:102CC000062210000000004206222008000000C872
-:102CD00006222000000000020622B000000000C60C
-:102CE0000422B318000503D20622B32C0000000B07
-:102CF0000422B358000503D70622B36C0000000B72
-:102D00000422B398000503DC0622B3AC0000000BDC
-:102D10000422B3D8000503E10622B3EC0000000B47
-:102D20000422B418000503E60622B42C0000000BB0
-:102D30000422B458000503EB0622B46C0000000B1B
-:102D40000422B498000503F00622B4AC0000000B86
-:102D50000422B4D8000503F50622B4EC0000000BF1
-:102D60000422B518000503FA0622B52C0000000B5A
-:102D70000422B558000503FF0622B56C0000000BC5
-:102D80000422B598000504040622B5AC0000000B2F
-:102D90000422B5D8000504090622B5EC0000000B9A
-:102DA0000422B6180005040E0622B62C0000000B03
-:102DB0000422B658000504130622B66C0000000B6E
-:102DC0000422B698000504180622B6AC0000000BD9
-:102DD0000422B6D80005041D0622B6EC0000000B44
-:102DE0000422B718000504220622B72C0000000BAD
-:102DF0000422B758000504270622B76C0000000B18
-:102E00000422B7980005042C0622B7AC0000000B82
-:102E10000422B7D8000504310622B7EC0000000BED
-:102E20000422B818000504360622B82C0000000B56
-:102E30000422B8580005043B0622B86C0000000BC1
-:102E40000422B898000504400622B8AC0000000B2C
-:102E50000422B8D8000504450622B8EC0000000B97
-:102E60000422B9180005044A0622B92C0000000B00
-:102E70000422B9580005044F0622B96C0000000B6B
-:102E80000422B998000504540622B9AC0000000BD6
-:102E90000422B9D8000504590622B9EC0000000B41
-:102EA0000422BA180005045E0622BA2C0000000BAA
-:102EB0000422BA58000504630622BA6C0000000B15
-:102EC0000422BA98000504680622BAAC0000000B80
-:102ED0000422BAD80005046D0622BAEC00000005F1
-:102EE0000622BB00000000530422BC4C0001047207
-:102EF0000622BC50000000030422BC5C00010473E5
-:102F00000622BC60000000030422BC6C00010474B3
-:102F10000622BC70000000030422BC7C0001047582
-:102F20000622BC80000000030422BC8C0001047651
-:102F30000622BC90000000030422BC9C0001047720
-:102F40000622BCA0000000030422BCAC00010478EF
-:102F50000622BCB0000000030422BCBC00010479BE
-:102F60000622880000000100062280000000020006
-:102F7000042212700010047A06223000000000C003
-:102F800006226700000001000622900000000400F5
-:102F900004226B080020048A022212C0FFFFFFFFF8
-:102FA000062211E800000002062212C800000009F3
-:102FB000062212EC0000000906228C000000000826
-:102FC0000222114800000000062213200000000623
-:102FD000062233000000000206226040000000309C
-:102FE00006228C20000000080222114C0000000084
-:102FF00006221338000000060622330800000002F3
-:10300000062261000000003006228C40000000080B
-:10301000022211500000000006221350000000069A
-:103020000622331000000002062261C000000030BA
-:1030300006228C60000000080222115400000000EB
-:103040000622136800000006062233180000000262
-:10305000062262800000003006228C8000000008FA
-:103060000222115800000000062213800000000612
-:1030700006223320000000020622634000000030D8
-:1030800006228CA0000000080222115C0000000053
-:1030900006221398000000060622332800000002D2
-:1030A000062264000000003006228CC000000008E8
-:1030B0000222116000000000062213B0000000068A
-:1030C0000622333000000002062264C000000030F7
-:1030D00006228CE0000000080222116400000000BB
-:1030E000062213C800000006062233380000000242
-:1030F0000622658000000030021610000000002843
-:1031000002170008000000020217002C0000000354
-:103110000217003C000000040217004800000002F3
-:103120000217004C000000900217005000000090B1
-:103130000217005400800090021700580810000089
-:10314000021700600000008A02170064000000807F
-:1031500002170068000000810217006C0000008068
-:10316000021700700000000602170078000007D068
-:103170000217007C0000076C02170038007C100466
-:10318000021700040000000F061640240000000291
-:10319000021640700000001C0216420800000001E8
-:1031A0000216421000000001021642200000000139
-:1031B0000216422800000001021642300000000101
-:1031C00002164238000000010216426000000002B0
-:1031D0000C16401C0003D0900A16401C0000009CF6
-:1031E0000B16401C000009C4021640300000000805
-:1031F000021640340000000C021640380000001097
-:1032000002164044000000200216400000000001A9
-:10321000021640D80000000102164008000000011C
-:103220000216400C000000010216401000000001D0
-:103230000216424000000000021642480000000052
-:103240000616427000000002021642500000000004
-:1032500002164258000000000616428000000002DC
-:1032600002166008000012240216600C0000121002
-:1032700002166010000012140216601C0000FFFF0E
-:10328000021660200000FFFF021660240000FFFF0E
-:10329000021660280000FFFF0216603800000020C0
-:1032A0000216603C0000002006166040000000028C
-:1032B00002166048000000230216604C0000002443
-:1032C000021660500000002502166054000000261F
-:1032D00002166058000000270216605C00000029FA
-:1032E000021660600000002A021660640000002BD5
-:1032F000021660680000002C0216606C0000002DB1
-:1033000002166070000000EC0216607400000011EC
-:1033100002166078000000120616607C0000000FA4
-:10332000021660B800000001021660BC0000000137
-:10333000061660C00000000C021660F000000001DC
-:10334000061660F400000031021661B800000001AA
-:10335000061661BC0000000D021661F000000001BD
-:10336000061661F4000000110216623807FFFFFF25
-:103370000216623C0000003F0216624007FFFFFF9A
-:10338000021662440000000F0116624800000000AF
-:103390000116624C0000000001166250000000009F
-:1033A000011662540000000001166258000000007F
-:1033B0000116625C0000000001166260000000005F
-:1033C000011662640000000001166268000000003F
-:1033D0000116626C0000000001166270000000001F
-:1033E00001166274000000000116627800000000FF
-:1033F0000116627C000000000C166000000003E86B
-:103400000A166000000000010B1660000000000AB0
-:1034100002168040000000060216804400000005ED
-:10342000021680480000000A0216804C00000005C9
-:103430000216805400000002021680CC0000000436
-:10344000021680D000000004021680D400000004A0
-:10345000021680D800000004021680DC0000000480
-:10346000021680E000000004021680E40000000460
-:10347000021680E800000004021688040000000420
-:10348000021680300000007C021680340000003DEF
-:10349000021680380000003F0216803C0000009CAD
-:1034A000021680F000000007061680F400000005F8
-:1034B0000216880C010101010216810800000000BB
-:1034C0000216810C000000040216811000000004A6
-:1034D0000216811400000002021688100801200460
-:1034E00002168118000000050216811C000000056C
-:1034F000021681200000000502168124000000054C
-:103500000216882C200810010216812800000008ED
-:103510000216812C00000006021681300000000710
-:1035200002168134000000000216883001010120DB
-:1035300006168138000000040216883401010101DA
-:1035400002168148000000000216814C00000004B1
-:10355000021681500000000402168154000000028F
-:103560000216883808012004021681580000000560
-:103570000216815C00000005021681600000000553
-:1035800002168164000000050216883C2008100124
-:1035900002168168000000080216816C0000000617
-:1035A00002168170000000070216817400000001FD
-:1035B00002168840010101200216817800000001F6
-:1035C0000216817C000000010216818000000001CB
-:1035D00002168184000000010216884401010101E5
-:1035E00002168188000000010216818C0000000490
-:1035F000021681900000000402168194000000026F
-:10360000021688480801200402168198000000056F
-:103610000216819C00000005021681A00000000532
-:10362000021681A40000000502168814200810016B
-:10363000021681A800000008021681AC00000006F6
-:10364000021681B000000007021681B400000001DC
-:103650000216881801010120021681B8000000013D
-:10366000021681BC00000001021681C000000001AA
-:10367000021681C4000000010216881C010101012C
-:10368000021681C800000001021681CC000000046F
-:10369000021681D000000004021681D4000000024E
-:1036A0000216882008012004021681D800000005B7
-:1036B000021681DC00000005021681E00000000512
-:1036C000021681E40000000502168824200810017B
-:1036D000021681E800000008021681EC00000006D6
-:1036E000021681F0000000070216E40C0000000042
-:1036F00002168828010101200616E41000000004CB
-:103700000216E000010101010216E42000000000A1
-:103710000216E424000000040216E428000000045D
-:103720000216E42C000000020216E0040801200446
-:103730000216E430000000050216E4340000000523
-:103740000216E438000000050216E43C0000000503
-:103750000216E008200810010216E44000000008EC
-:103760000216E444000000060216E44800000007C8
-:103770000216E44C000000000216E00C01010120DA
-:103780000616E450000000040216E01001010101D9
-:103790000216E460000000000216E4640000000469
-:1037A0000216E468000000040216E46C0000000247
-:1037B0000216E014080120040216E470000000055F
-:1037C0000216E474000000050216E478000000050B
-:1037D0000216E47C000000050216E0182008100123
-:1037E0000216E480000000080216E48400000006CF
-:1037F0000216E488000000070216E48C00000001B5
-:103800000216E01C010101200216E49000000001F4
-:103810000216E494000000010216E4980000000182
-:103820000216E49C000000010216E02001010101E3
-:103830000216E4A0000000010216E4A40000000447
-:103840000216E4A8000000040216E4AC0000000226
-:103850000216E024080120040216E4B0000000056E
-:103860000216E4B4000000050216E4B800000005EA
-:103870000216E4BC000000050216E0282008100132
-:103880000216E4C0000000080216E4C400000006AE
-:103890000216E4C8000000070216E4CC0000000194
-:1038A0000216E02C010101200216E4D00000000104
-:1038B0000216E4D4000000010216E4D80000000162
-:1038C0000216E4DC000000010216E03001010101F3
-:1038D0000216E4E0000000010216E4E40000000427
-:1038E0000216E4E8000000040216E4EC0000000206
-:1038F0000216E034080120040216E4F0000000057E
-:103900000216E4F4000000050216E4F800000005C9
-:103910000216E4FC000000050216E0382008100141
-:103920000216E500000000080216E504000000068B
-:103930000216E508000000070216E03C0101012024
-:1039400002168240003F003F021682440000000041
-:103950000216E524003F003F0216E52800000000A3
-:1039600002168248000000000216824C003F003F11
-:103970000216E52C000000000216E530003F003F73
-:10398000021682500100010002168254010001005B
-:103990000216E534010001000216E53801000100BD
-:1039A00006168258000000020216E53C00000000E6
-:1039B0000216E540000000000216826000C000C050
-:1039C0000216826400C000C00216E54400C000C0B8
-:1039D0000216E54800C000C0021682681E001E00E4
-:1039E0000216826C1E001E000216E54C1E001E0010
-:1039F0000216E5501E001E000216827040004000B4
-:103A000002168274400040000216E5544000400057
-:103A10000216E558400040000216827880008000BF
-:103A20000216827C800080000216E55C8000800027
-:103A30000216E560800080000216828020002000CF
-:103A400002168284200020000216E5642000200077
-:103A50000216E56820002000061682880000000299
-:103A60000216E56C000000000216E5700000000080
-:103A700002168290000000000216829400000000EE
-:103A80000216E574000000000216E5780000000050
-:103A900002168298000000000216829C00000000BE
-:103AA0000216E57C000000000216E5800000000020
-:103AB000021682A000000000021682A4000000018D
-:103AC000061682A80000000A021681F400000C0805
-:103AD000021681F800000040021681FC000001007F
-:103AE0000216820000000020021682040000001767
-:103AF00002168208000000800216820C00000200FC
-:103B000002168210000000000216821801FF01FF59
-:103B10000216821401FF01FF0216E51001FF01FFEA
-:103B20000216E50C01FF01FF0216823C00000013A3
-:103B3000021680900000013F0216806000000140E4
-:103B40000216806400000140061680680000000232
-:103B500002168070000000C0061680740000000786
-:103B60000216809C00000048021680A00000004859
-:103B7000061680A400000002021680AC0000004877
-:103B8000061680B000000007021682380000800090
-:103B900002168234000025E40216809400007FFFA4
-:103BA00002168220000F000F0216821C000F000F69
-:103BB0000216E518000F000F0216E514000F000FA3
-:103BC000021682280000000002168224FFFFFFFF79
-:103BD0000216E520000000000216E51CFFFFFFFFB3
-:103BE0000216E6BC000000000216E6C0000000025B
-:103BF0000216E6C4000000010216E6C80000000339
-:103C00000216E6CC000000040216E6D00000000612
-:103C10000216E6D4000000050216E6D800000007F0
-:103C2000021680EC000000FF0214000000000001FA
-:103C30000214000C0000000102140040000000010A
-:103C40000214004400007FFF0214000C000000007A
-:103C500002140000000000000214006C00000000CC
-:103C600002140004000000010214003000000001F2
-:103C700002140004000000000214005C00000000B8
-:103C800002140008000000010214003400000001CA
-:103C90000214000800000000021400600000000090
-:103CA00006028000000020000202005800000032DE
-:103CB000020200A003150020020200A40315002048
-:103CC000020200A801000030020200AC081000004F
-:103CD000020200B000000033020200B40000003015
-:103CE000020200B800000031020200BC0000000324
-:103CF000020200C000000006020200C4000000032F
-:103D0000020200C800000003020200CC0000000212
-:103D1000020200D000000000020200D400000002F5
-:103D2000020200DC00000000020200E000000006C9
-:103D3000020200E400000004020200E800000002A9
-:103D4000020200EC00000002020200F0000000018C
-:103D5000020200FC00000006020201200000000038
-:103D60000202013400000002020201B00000000162
-:103D70000202020C00000001020202140000000115
-:103D80000202021800000002020204040000000106
-:103D90000202040C00000040020204100000004077
-:103DA0000202041C000000040202042000000020A3
-:103DB0000202042400000002020204280000002085
-:103DC000060205000000001204020480002004AA7C
-:103DD000020200600000000F020200640000000701
-:103DE00002020068000000000202006C0000000EE9
-:103DF000020200700000000E0602007400000003C2
-:103E0000020200F4000000040202000400000001AD
-:103E100002020008000000010202000C0000000184
-:103E20000202001000000001020200140000000164
-:103E300002020018000000010202001C0000000144
-:103E40000202002000000001020200240000000124
-:103E500002020028000000010202002C0000000104
-:103E600002020030000000010202003400000001E4
-:103E700002020038000000010202003C00000001C4
-:103E800002020040000000010202004400000001A4
-:103E900002020048000000010202004C0000000184
-:103EA000020200500000000102020108000000C8E8
-:103EB0000202011800000002020201C4000000001A
-:103EC000020201CC00000000020201D40000000246
-:103ED000020201DC00000002020201E4000000FF17
-:103EE000020201EC000000FF0202010000000000DD
-:103EF0000202010C000000C80202011C00000002C6
-:103F0000020201C800000000020201D0000000000F
-:103F1000020201D800000002020201E000000002DB
-:103F2000020201E8000000FF020201F0000000FFB1
-:103F3000020201040000000002020108000000C8A3
-:103F40000202011800000002020201C40000000089
-:103F5000020201CC00000000020201D400000002B5
-:103F6000020201DC00000002020201E4000000FF86
-:103F7000020201EC000000FF02020100000000004C
-:103F80000202010C000000C80202011C0000000235
-:103F9000020201C800000000020201D0000000007F
-:103FA000020201D800000002020201E0000000024B
-:103FB000020201E8000000FF020201F0000000FF21
-:103FC000020201040000000002020108000000C813
-:103FD0000202011800000002020201C400000000F9
-:103FE000020201CC00000000020201D40000000225
-:103FF000020201DC00000002020201E4000000FFF6
-:10400000020201EC000000FF0202010000000000BB
-:104010000202010C000000C80202011C00000002A4
-:10402000020201C800000000020201D000000000EE
-:10403000020201D800000002020201E000000002BA
-:10404000020201E8000000FF020201F0000000FF90
-:10405000020201040000000002020108000000C882
-:104060000202011800000002020201C40000000068
-:10407000020201CC00000000020201D40000000294
-:10408000020201DC00000002020201E4000000FF65
-:10409000020201EC000000FF02020100000000002B
-:1040A0000202010C000000C80202011C0000000214
-:1040B000020201C800000000020201D0000000005E
-:1040C000020201D800000002020201E0000000022A
-:1040D000020201E8000000FF020201F0000000FF00
-:1040E00002020104000000000728040000A00000F4
-:1040F000082807B8000904CA072C000034DA0000B9
-:10410000072C800038F80D37072D000037B91B76D3
-:10411000072D800031782965072E00001C7A35C4F0
-:10412000082E48E036E404CC01280000000000001E
-:104130000128000400000000012800080000000021
-:104140000128000C00000000012800100000000001
-:1041500001280014000000000228002000000001D7
-:1041600002280024000000020228002800000003AA
-:104170000228002C0000000002280030000000048B
-:10418000022800340000000102280038000000006E
-:104190000228003C0000000102280040000000044A
-:1041A000022800440000000002280048000000012E
-:1041B0000228004C0000000302280050000000000C
-:1041C00002280054000000010228005800000004EA
-:1041D0000228005C000000000228006000000001CE
-:1041E00002280064000000030228006800000000AC
-:1041F0000228006C0000000102280070000000048A
-:10420000022800740000000002280078000000046A
-:104210000228007C00000003062800800000000245
-:10422000022800A400003FFF022800A8000003FFAE
-:1042300002280224000000000228023400000000CE
-:104240000228024C00000000022802E40000FFFFE8
-:104250000628200000000800022B8BC0000000018F
-:10426000022B800000000000022B8040000000189C
-:10427000022B80800000000C022B80C00000006632
-:104280000C2B83000007A1200A2B830000000138BB
-:104290000B2B8300000013880A2B834000000000D2
-:1042A0000C2B8340000001F40B2B83400000000521
-:1042B000022B83800007A120022B83C0000001F4A1
-:1042C000022B1480000000010A2B14800000000063
-:1042D000062A9AF800000004042A9B08000204CE73
-:1042E000062A9B1000000006062A90800000004865
-:1042F000062A2008000000C8062A2000000000024C
-:10430000062A91A800000086062A900000000020DE
-:10431000062A93C800000003042A93D4000104D0A5
-:10432000062A9DA800000002042A9498000404D1E3
-:10433000042A9D58000104D5062A9D5C0000001146
-:10434000042ACB20001004D6042A3000000204E620
-:10435000062A300800000100062A40400000001034
-:10436000042A4000001004E8042A8408000204F82B
-:10437000062A9DA000000002062AB000000000509E
-:10438000062ABB7000000070062AB150000000022F
-:10439000062ABB6000000004062AD00000000800C6
-:1043A000062AC00000000150062A94A8000000322E
-:1043B000062A502000000002062A503000000002A9
-:1043C000062A500000000002062A501000000002D9
-:1043D000022A520800000001042A9B28000204FA65
-:1043E000062A963800000022042A96C0000104FC28
-:1043F000062A96C400000003062A976800000022DF
-:10440000042A97F0000104FD062A97F40000000337
-:10441000062A989800000022042A9920000104FE30
-:10442000062A992400000003062A99C800000022E9
-:10443000042A9A50000104FF062A9A54000000033F
-:10444000062AB14000000002062AC54000000150C3
-:10445000062A957000000032062A5028000000024B
-:10446000062A503800000002062A50080000000208
-:10447000062A501800000002022A520C0000000117
-:10448000042A9B3000020500062A96D00000002274
-:10449000042A975800010502062A975C00000003D1
-:1044A000062A980000000022042A988800010503CB
-:1044B000062A988C00000003062A9930000000228A
-:1044C000042A99B800010504062A99BC00000003DB
-:1044D000062A9A6000000022042A9AE800010505D5
-:1044E000062A9AEC00000003062AB14800000002E8
-:1044F000022ACA8000000000042A9B38001005062A
-:10450000062A50480000000E022ACA84000000005B
-:10451000042A9B7800100516062A50800000000E21
-:10452000022ACA8800000000042A9BB80010052651
-:10453000062A50B80000000E022ACA8C00000000B3
-:10454000042A9BF800100536062A50F00000000EE1
-:10455000022ACA9000000000042A9C380010054678
-:10456000062A51280000000E022ACA94000000000A
-:10457000042A9C7800100556062A51600000000E9F
-:10458000022ACA9800000000042A9CB800100566A0
-:10459000062A51980000000E022ACA9C0000000062
-:1045A000042A9CF800100576062A51D00000000E5F
-:1045B000021010080000000102101050000000015D
-:1045C000021010000003D000021010040000003D93
-:1045D0000910180002000586091011000010078656
-:1045E0000610114000000008091011600010079625
-:1045F000061011A00000001806102400000000E0C2
-:104600000210201C00000000021020200000000109
-:10461000021020C00000000202102004000000016F
-:10462000021020080000000109103C00000507A648
-:1046300009103800000507AB09103820000507B045
-:1046400006104C000000010002104028000000107D
-:104650000210404400003FFF0210405800280000B4
-:10466000021040840084924A02104058000000006A
-:104670000210800000001080021080AC00000000DA
-:1046800002108038000000100210810000000000BD
-:10469000061081200000000202108008000002B510
-:1046A0000210801000000000061082000000004A86
-:1046B000021081080001FFFF061081400000000287
-:1046C0000210800000001A800610900000000024F4
-:1046D000061091200000004A061093700000004A66
-:1046E000061095C00000004A0210800400001080EF
-:1046F000021080B0000000010210803C0000001099
-:104700000210810400000000061081280000000251
-:104710000210800C000002B502108014000000009E
-:10472000061084000000004A0210810C0001FFFF07
-:1047300006108148000000020210800400001A8068
-:104740000610909000000024061092480000004AD5
-:10475000061094980000004A061096E80000004AEF
-:104760000210800000001080021080AC00000002E7
-:1047700002108038000000100210810000000000CC
-:10478000061081200000000202108008000002B51F
-:104790000210801000000000061082000000004A95
-:1047A000021081080001FFFF061081400000000296
-:1047B0000210800000001A80061090000000002403
-:1047C000061091200000004A061093700000004A75
-:1047D000061095C00000004A0210800400001080FE
-:1047E000021080B0000000030210803C00000010A6
-:1047F0000210810400000000061081280000000261
-:104800000210800C000002B50210801400000000AD
-:10481000061084000000004A0210810C0001FFFF16
-:1048200006108148000000020210800400001A8077
-:104830000610909000000024061092480000004AE4
-:10484000061094980000004A061096E80000004AFE
-:104850000210800000001080021080AC00000004F4
-:1048600002108038000000100210810000000000DB
-:10487000061081200000000202108008000002B52E
-:104880000210801000000000061082000000004AA4
-:10489000021081080001FFFF0610814000000002A5
-:1048A0000210800000001A80061090000000002412
-:1048B000061091200000004A061093700000004A84
-:1048C000061095C00000004A02108004000010800D
-:1048D000021080B0000000050210803C00000010B3
-:1048E0000210810400000000061081280000000270
-:1048F0000210800C000002B50210801400000000BD
-:10490000061084000000004A0210810C0001FFFF25
-:1049100006108148000000020210800400001A8086
-:104920000610909000000024061092480000004AF3
-:10493000061094980000004A061096E80000004A0D
-:104940000210800000001080021080AC0000000601
-:1049500002108038000000100210810000000000EA
-:10496000061081200000000202108008000002B53D
-:104970000210801000000000061082000000004AB3
-:10498000021081080001FFFF0610814000000002B4
-:104990000210800000001A80061090000000002421
-:1049A000061091200000004A061093700000004A93
-:1049B000061095C00000004A02108004000010801C
-:1049C000021080B0000000070210803C00000010C0
-:1049D000021081040000000006108128000000027F
-:1049E0000210800C000002B50210801400000000CC
-:1049F000061084000000004A0210810C0001FFFF35
-:104A000006108148000000020210800400001A8095
-:104A10000610909000000024061092480000004A02
-:104A2000061094980000004A061096E80000004A1C
-:104A3000021205B0000000010212049000E383405E
-:104A40000212051400003C100212066C0000000166
-:104A5000021206700000000002120494FFFFFFFF24
-:104A600002120498FFFFFFFF0212049CFFFFFFFFEA
-:104A7000021204A0FFFFFFFF021204A4FFFFFFFFCA
-:104A8000021204A8FFFFFFFF021204ACFFFFFFFFAA
-:104A9000021204B0FFFFFFFF021204BCFFFFFFFF82
-:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
-:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
-:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
-:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
-:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
-:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
-:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
-:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
-:104B200002120504FFFFFFFF02120508FFFFFFFF4F
-:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
-:104B4000021204D4FF809000021204B4F00050005E
-:104B5000021204B8F00010000212039000000008D6
-:104B60000212039C00000008021203A000000008CB
-:104B7000021203A400000002021203BC00000004A1
-:104B8000021203C000000005021203C4000000046A
-:104B9000021203D0000000000212036C00000001AA
-:104BA000021203680000003F021201BC0000004036
-:104BB000021201C000001808021201C4000008031C
-:104BC000021201C800000803021201CC00000040DC
-:104BD000021201D000000003021201D400000803F9
-:104BE000021201D800000803021201DC00000803D1
-:104BF000021201E000010003021201E400000803B8
-:104C0000021201E800000803021201EC0000000398
-:104C1000021201F000000003021201F40000000380
-:104C2000021201F800000003021201FC0000000360
-:104C3000021202000000000302120204000000033E
-:104C400002120208000000030212020C000000031E
-:104C500002120210000000030212021400000003FE
-:104C600002120218000000030212021C00000003DE
-:104C700002120220000000030212022400000003BE
-:104C800002120228000024030212022C0000002F4E
-:104C90000212023000000009021202340000001962
-:104CA00002120238000001840212023C000001835B
-:104CB0000212024000000306021202440000001922
-:104CC00002120248000000060212024C0000030615
-:104CD00002120250000003060212025400000306F2
-:104CE0000212025800000C860212025C0000030649
-:104CF00002120260000003060212026400000006B5
-:104D000002120268000000060212026C0000000697
-:104D10000212027000000006021202740000000677
-:104D200002120278000000060212027C0000000657
-:104D30000212028000000006021202840000000637
-:104D400002120288000000060212028C0000000617
-:104D500002120290000000060212029400000006F7
-:104D600002120298000000060212029C00000006D7
-:104D7000021202A000000306021202A400000013A7
-:104D8000021202A800000006021202B00000100485
-:104D9000021202B400001004021203240010644046
-:104DA0000212032800106440021205B40000000142
-:104DB000021201B0000000010600A0000000000C7B
-:104DC0000200A050000000000200A05400000000FB
-:104DD0000200A0EC555400000200A0F055555555B6
-:104DE0000200A0F4000055550200A0F8F0000000F9
-:104DF0000200A0FC555400000200A1005555555575
-:104E00000200A104000055550200A108F0000000B6
-:104E10000200A18C555400000200A1905555555533
-:104E20000200A194000055550200A198F000000076
-:104E30000200A19C000000000200A1A000010000EF
-:104E40000200A1A4000050140200A1A8000000006C
-:104E50000200A45C00000C000200A61C000000037D
-:104E60000200A06CFF5C00000200A070FFF55FFF75
-:104E70000200A0740000FFFF0200A078F00003E031
-:104E80000200A07C000000000200A0800000A00042
-:104E90000600A084000000050200A0980FE00000BA
-:104EA0000600A09C000000070200A0B8000004005B
-:104EB0000600A0BC000000030200A0C80000100013
-:104EC0000600A0CC000000030200A0D800004000B3
-:104ED0000600A0DC000000030200A0E800010000C2
-:104EE0000600A22C000000040200A10CFF5C0000E0
-:104EF0000200A110FFF55FFF0200A1140000FFFFF8
-:104F00000200A118F00003E00200A11C0000000054
-:104F10000200A1200000A0000600A124000000055E
-:104F20000200A1380FE000000600A13C00000007CD
-:104F30000200A158000008000600A15C0000000368
-:104F40000200A168000020000600A16C0000000320
-:104F50000200A178000080000600A17C0000000390
-:104F60000200A188000200000600A23C000000042C
-:104F70000200A030000000000200A0340000000089
-:104F80000200A038000000000200A03C0000000069
-:104F90000200A040000000000200A0440000000049
-:104FA0000200A048000000000200A04C0000000029
-:104FB00000000000000000000000003000000000C1
-:104FC00000000000000000000000000000000000E1
-:104FD00000000000000000000000000000000000D1
-:104FE0000000000000300031000000000000000060
-:104FF00000000000000000000000000000000000B1
-:1050000000000000000000000000000000000000A0
-:10501000003100520000000000000000000000000D
-:105020000000000000000000000000000000000080
-:105030000000000000000000000000000052008995
-:1050400000000000000000000089008D008D00912C
-:1050500000910095009500990099009D009D00A188
-:1050600000A100A500A500A900A900AE00AE00B1F6
-:1050700000B100B4000000000000000000000000CB
-:105080000000000000000000000000000000000020
-:105090000000000000B40309030903130313031DF8
-:1050A000031D03240324032B032B03320332033990
-:1050B00003390340034003470347034E034E0355A0
-:1050C00000000000000000000000000000000000E0
-:1050D00000000000000000000000000000000000D0
-:1050E00000000000000000000000000000000000C0
-:1050F00000000000000000000000000000000000B0
-:10510000000000000000000000000000000000009F
-:10511000000000000000000000000000000000008F
-:10512000000000000000000000000000000000007F
-:10513000000000000000000000000000000000006F
-:10514000000000000000000000000000000000005F
-:10515000000000000000000000000000000000004F
-:10516000000000000000000000000000000000003F
-:105170000355035B0000000000000000035B035CBC
-:10518000035C035D035D035E035E035F035F036017
-:1051900003600361036103620362036300000000B4
-:1051A00000000000000000000000000000000000FF
-:1051B00000000000000000000000000000000000EF
-:1051C00000000000000000000363036D036D037B1B
-:1051D000037B0389000000000000000000000000C5
-:1051E00000000000000000000000000000000000BF
-:1051F00000000000000000000000000000000000AF
-:10520000000000000000000000000000000000009E
-:10521000000000000000000000000000000000008E
-:105220000389038A00000000000000000000000065
-:10523000000000000000000000000000000000006E
-:10524000000000000000000000000000038A03D6F8
-:10525000000000000000000000000000000000004E
-:10526000000000000000000000000000000000003E
-:10527000000000000000000003D604010000000050
-:10528000000000000000000000000000000000001E
-:10529000000000000000000000000000000000000E
-:1052A00000000000040104330000000000000000C2
-:1052B0000433043A043A0441044104480448044FC6
-:1052C000044F04560456045D045D04640464046BD6
-:1052D000046B04A4000000000000000004A404A863
-:1052E00004A804AC04AC04B004B004B404B404B81E
-:1052F00004B804BC04BC04C004C004C404C4051342
-:105300000513052A052A05410541054305430545C1
-:1053100005450547054705490549054B054B054D1D
-:10532000054D054F054F0551055105E805E805E90F
-:1053300005E905EA05EA05EF05EF05F405F405F9C9
-:1053400005F905FE05FE0603060306080608060D18
-:10535000060D0612061206130000000000000000F1
-:10536000000000000000000000000000000000003D
-:10537000000000000000000000000000000000002D
-:1053800006130624000000000000000000000000DA
-:10539000000000000000000000000000000000000D
-:1053A0000000000000000000000000000624063994
-:1053B0000639063C063C063F0000000000000000E5
-:1053C00000000000000000000000000000000000DD
-:1053D0000000000000000000063F0675000000000D
-:1053E00000000000000000000000000000000000BD
-:1053F00000000000000000000000000000000000AD
-:1054000000000000067507780000000000000000A2
-:10541000000000000000000000000000000000008C
-:10542000000000000000000000000000000000007C
-:105430000778077F077F078307830787000000003F
-:10544000000000000000000000000000000000005C
-:10545000000000000000000000000000078707C8EF
-:10546000000000000000000007C807D107D107DADC
-:1054700007DA07E307E307EC07EC07F507F507FE94
-:1054800007FE080708070810081008670867087C67
-:10549000087C089108910894089408970897089A3E
-:1054A000089A089D089D08A008A008A308A308A6BC
-:1054B00008A608A908A908B2000000000000000022
-:1054C00000000000000000000000000000000000DC
-:1054D00000000000000000000000000000000000CC
-:1054E00008B208B800000000000000000000000042
-:1054F00000000000000000000000000000000000AC
-:1055000000000000000000000000000008B808BB18
-:10551000000000000000000000000000000000008B
-:10552000000000000000000000000000000000007B
-:10553000000000000000000008BB08C100000000DF
-:10554000000000000000000000000000000000005B
-:10555000000000000000000000000000000000004B
-:10556000000000000000000000000000000000003B
-:1055700008C108D008D008DF08DF08EE08EE08FDF3
-:1055800008FD090C090C091B091B092A092A0939FC
-:10559000093909AA00000000000000000000000016
-:1055A00000000000000000000000000000000000FB
-:1055B00000000000000000000000000009AA09BF70
-:1055C00009BF09D009D009E109E109E209E209E3CB
-:1055D00009E309E409E409E509E509E609E609E75B
-:1055E00009E709E809E809E90000000000000000F7
-:1055F00000000000000000000000000000000000AB
-:10560000000000000000000000000000000000009A
-:10561000000000000000000000000000000000008A
-:10562000000000000000000000000000000000007A
-:10563000000000000000000000000000000000006A
-:10564000000000000000000000000000000000005A
-:10565000000000000000000000000000000000004A
-:10566000000000000000000000000000000000003A
-:10567000000000000000000000000000000000002A
-:10568000000000000000000000000000000000001A
-:10569000000000000000000000000000000000000A
-:1056A00000000000000000000000000000000000FA
-:1056B00000000000000000000000000000000000EA
-:1056C000000000000000000000010000000204C013
-:1056D0000003098000040E4000051300000617C0F7
-:1056E00000071C800008214000092600000A2AC08B
-:1056F000000B2F80000C3440000D3900000E3DC01F
-:10570000000F42800010474000114C00001250C0B2
-:105710000013558000145A4000155F00001663C046
-:105720000017688000186D4000197200001A76C0DA
-:10573000001B7B80001C8040001D8500001E89C06E
-:10574000001F8E80000093400000200000004000F9
-:1057500000006000000080000000A0000000C00009
-:105760000000E000000100000001200000014000F6
-:1057700000016000000180000001A0000001C000E5
-:105780000001E000000200000002200000024000D2
-:1057900000026000000280000002A0000002C000C1
-:1057A0000002E000000300000003200000034000AE
-:1057B00000036000000380000003A0000003C0009D
-:1057C0000003E0000004000000042000000440008A
-:1057D00000046000000480000004A0000004C00079
-:1057E0000004E00000050000000520000005400066
-:1057F00000056000000580000005A0000005C00055
-:105800000005E00000060000000620000006400041
-:1058100000066000000680000006A0000006C00030
-:105820000006E0000007000000072000000740001D
-:1058300000076000000780000007A0000007C0000C
-:105840000007E000000800000008200000084000F9
-:1058500000086000000880000008A0000008C000E8
-:105860000008E000000900000009200000094000D5
-:1058700000096000000980000009A0000009C000C4
-:105880000009E000000A0000000A2000000A4000B1
-:10589000000A6000000A8000000AA000000AC000A0
-:1058A000000AE000000B0000000B2000000B40008D
-:1058B000000B6000000B8000000BA000000BC0007C
-:1058C000000BE000000C0000000C2000000C400069
-:1058D000000C6000000C8000000CA000000CC00058
-:1058E000000CE000000D0000000D2000000D400045
-:1058F000000D6000000D8000000DA000000DC00034
-:10590000000DE000000E0000000E2000000E400020
-:10591000000E6000000E8000000EA000000EC0000F
-:10592000000EE000000F0000000F2000000F4000FC
-:10593000000F6000000F8000000FA000000FC000EB
-:10594000000FE000001000000010200000104000D8
-:1059500000106000001080000010A0000010C000C7
-:105960000010E000001100000011200000114000B4
-:1059700000116000001180000011A0000011C000A3
-:105980000011E00000120000001220000012400090
-:1059900000126000001280000012A0000012C0007F
-:1059A0000012E0000013000000132000001340006C
-:1059B00000136000001380000013A0000013C0005B
-:1059C0000013E00000140000001420000014400048
-:1059D00000146000001480000014A0000014C00037
-:1059E0000014E00000150000001520000015400024
-:1059F00000156000001580000015A0000015C00013
-:105A00000015E000001600000016200000164000FF
-:105A100000166000001680000016A0000016C000EE
-:105A20000016E000001700000017200000174000DB
-:105A300000176000001780000017A0000017C000CA
-:105A40000017E000001800000018200000184000B7
-:105A500000186000001880000018A0000018C000A6
-:105A60000018E00000190000001920000019400093
-:105A700000196000001980000019A0000019C00082
-:105A80000019E000001A0000001A2000001A40006F
-:105A9000001A6000001A8000001AA000001AC0005E
-:105AA000001AE000001B0000001B2000001B40004B
-:105AB000001B6000001B8000001BA000001BC0003A
-:105AC000001BE000001C0000001C2000001C400027
-:105AD000001C6000001C8000001CA000001CC00016
-:105AE000001CE000001D0000001D2000001D400003
-:105AF000001D6000001D8000001DA000001DC000F2
-:105B0000001DE000001E0000001E2000001E4000DE
-:105B1000001E6000001E8000001EA000001EC000CD
-:105B2000001EE000001F0000001F2000001F4000BA
-:105B3000001F6000001F8000001FA000001FC000A9
-:105B4000001FE00000200000002020000020400096
-:105B500000206000002080000020A0000020C00085
-:105B60000020E00000210000002120000021400072
-:105B700000216000002180000021A0000021C00061
-:105B80000021E0000022000000222000002240004E
-:105B900000226000002280000022A0000022C0003D
-:105BA0000022E0000023000000232000002340002A
-:105BB00000236000002380000023A0000023C00019
-:105BC0000023E00000240000002420000024400006
-:105BD00000246000002480000024A0000024C000F5
-:105BE0000024E000002500000025200000254000E2
-:105BF00000256000002580000025A0000025C000D1
-:105C00000025E000002600000026200000264000BD
-:105C100000266000002680000026A0000026C000AC
-:105C20000026E00000270000002720000027400099
-:105C300000276000002780000027A0000027C00088
-:105C40000027E00000280000002820000028400075
-:105C500000286000002880000028A0000028C00064
-:105C60000028E00000290000002920000029400051
-:105C700000296000002980000029A0000029C00040
-:105C80000029E000002A0000002A2000002A40002D
-:105C9000002A6000002A8000002AA000002AC0001C
-:105CA000002AE000002B0000002B2000002B400009
-:105CB000002B6000002B8000002BA000002BC000F8
-:105CC000002BE000002C0000002C2000002C4000E5
-:105CD000002C6000002C8000002CA000002CC000D4
-:105CE000002CE000002D0000002D2000002D4000C1
-:105CF000002D6000002D8000002DA000002DC000B0
-:105D0000002DE000002E0000002E2000002E40009C
-:105D1000002E6000002E8000002EA000002EC0008B
-:105D2000002EE000002F0000002F2000002F400078
-:105D3000002F6000002F8000002FA000002FC00067
-:105D4000002FE00000300000003020000030400054
-:105D500000306000003080000030A0000030C00043
-:105D60000030E00000310000003120000031400030
-:105D700000316000003180000031A0000031C0001F
-:105D80000031E0000032000000322000003240000C
-:105D900000326000003280000032A0000032C000FB
-:105DA0000032E000003300000033200000334000E8
-:105DB00000336000003380000033A0000033C000D7
-:105DC0000033E000003400000034200000344000C4
-:105DD00000346000003480000034A0000034C000B3
-:105DE0000034E000003500000035200000354000A0
-:105DF00000356000003580000035A0000035C0008F
-:105E00000035E0000036000000362000003640007B
-:105E100000366000003680000036A0000036C0006A
-:105E20000036E00000370000003720000037400057
-:105E300000376000003780000037A0000037C00046
-:105E40000037E00000380000003820000038400033
-:105E500000386000003880000038A0000038C00022
-:105E60000038E0000039000000392000003940000F
-:105E700000396000003980000039A0000039C000FE
-:105E80000039E000003A0000003A2000003A4000EB
-:105E9000003A6000003A8000003AA000003AC000DA
-:105EA000003AE000003B0000003B2000003B4000C7
-:105EB000003B6000003B8000003BA000003BC000B6
-:105EC000003BE000003C0000003C2000003C4000A3
-:105ED000003C6000003C8000003CA000003CC00092
-:105EE000003CE000003D0000003D2000003D40007F
-:105EF000003D6000003D8000003DA000003DC0006E
-:105F0000003DE000003E0000003E2000003E40005A
-:105F1000003E6000003E8000003EA000003EC00049
-:105F2000003EE000003F0000003F2000003F400036
-:105F3000003F6000003F8000003FA000003FC00025
-:105F4000003FE000003FE00100000000000001FF12
-:105F50000000020000007FF800007FF80000014010
-:105F600000003500000000010000FF0000000000FC
-:105F70000000FF00000000000000FF000000000023
-:105F80000000FF00000000000000FF000000000013
-:105F90000000FF00000000000000FF000000000003
-:105FA0000000FF000000000000000000140AFF00D5
-:105FB00000000001000000000020100100000000AF
-:105FC0000100900000000100000090020000900419
-:105FD00000009006000090080000900A0000900C5D
-:105FE0000000900E0000901000009012000090142D
-:105FF00000009016000090180000901A0000901CFD
-:106000000000901E000090200000902200009024CC
-:1060100000009026000090280000902A0000902C9C
-:106020000000902E0000903000009032000090346C
-:1060300000009036000090380000903A0000903C3C
-:106040000000903E0000904000009042000090440C
-:1060500000009046000090480000904A0000904CDC
-:106060000000904E000090500000905200009054AC
-:1060700000009056000090580000905A0000905C7C
-:106080000000905E0000906000009062000090644C
-:1060900000009066000090680000906A0000906C1C
-:1060A0000000906E000090700000907200009074EC
-:1060B00000009076000090780000907A0000907CBC
-:1060C0000000907E0000908000009082000090848C
-:1060D00000009086000090880000908A0000908C5C
-:1060E0000000908E0000909000009092000090942C
-:1060F00000009096000090980000909A0000909CFC
-:106100000000909E000090A0000090A2000090A4CB
-:10611000000090A6000090A8000090AA000090AC9B
-:10612000000090AE000090B0000090B2000090B46B
-:10613000000090B6000090B8000090BA000090BC3B
-:10614000000090BE000090C0000090C2000090C40B
-:10615000000090C6000090C8000090CA000090CCDB
-:10616000000090CE000090D0000090D2000090D4AB
-:10617000000090D6000090D8000090DA000090DC7B
-:10618000000090DE000090E0000090E2000090E44B
-:10619000000090E6000090E8000090EA000090EC1B
-:1061A000000090EE000090F0000090F2000090F4EB
-:1061B000000090F6000090F8000090FA000090FCBB
-:1061C000000090FE00009100000091020000910488
-:1061D00000009106000091080000910A0000910C57
-:1061E0000000910E00009110000091120000911427
-:1061F00000009116000091180000911A0000911CF7
-:106200000000911E000091200000912200009124C6
-:1062100000009126000091280000912A0000912C96
-:106220000000912E00009130000091320000913466
-:1062300000009136000091380000913A0000913C36
-:106240000000913E00009140000091420000914406
-:1062500000009146000091480000914A0000914CD6
-:106260000000914E000091500000915200009154A6
-:1062700000009156000091580000915A0000915C76
-:106280000000915E00009160000091620000916446
-:1062900000009166000091680000916A0000916C16
-:1062A0000000916E000091700000917200009174E6
-:1062B00000009176000091780000917A0000917CB6
-:1062C0000000917E00009180000091820000918486
-:1062D00000009186000091880000918A0000918C56
-:1062E0000000918E00009190000091920000919426
-:1062F00000009196000091980000919A0000919CF6
-:106300000000919E000091A0000091A2000091A4C5
-:10631000000091A6000091A8000091AA000091AC95
-:10632000000091AE000091B0000091B2000091B465
-:10633000000091B6000091B8000091BA000091BC35
-:10634000000091BE000091C0000091C2000091C405
-:10635000000091C6000091C8000091CA000091CCD5
-:10636000000091CE000091D0000091D2000091D4A5
-:10637000000091D6000091D8000091DA000091DC75
-:10638000000091DE000091E0000091E2000091E445
-:10639000000091E6000091E8000091EA000091EC15
-:1063A000000091EE000091F0000091F2000091F4E5
-:1063B000000091F6000091F8000091FA000091FCB5
-:1063C000000091FEFFFFFFFFFFFFFFFFFFFFFFFF4A
-:1063D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
-:1063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:1063F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
-:10640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
-:10641000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
-:10642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
-:10643000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
-:10644000FFFFFFFF0000000300BEBC2000000000B3
-:10645000000000050000000300BEBC20000000009A
-:10646000000000050000000300BEBC20000000008A
-:10647000000000050000000300BEBC20000000007A
-:10648000000000050000000300BEBC20000000006A
-:10649000000000050000000300BEBC20000000005A
-:1064A000000000050000000300BEBC20000000004A
-:1064B000000000050000000300BEBC20000000003A
-:1064C0000000000500002000000040C000006180C6
-:1064D000000082400000A3000000C3C00000E48070
-:1064E0000001054000012600000146C00001678050
-:1064F000000188400001A9000001C9C00001EA8034
-:1065000000020B4000022C0000024CC000026D8013
-:1065100000028E400002AF000002CFC00002F080F7
-:10652000000011400000800000010380000187008E
-:1065300000020A8000028E00000311800003950013
-:106540000004188000049C0000051F800005A300C3
-:10655000000626800006AA0000072D800007B10073
-:10656000000834800008B80000093B800009BF0023
-:10657000000A4280000AC600000B4980000BCD00D3
-:10658000000C5080000CD400000D578000005B0010
-:1065900000007FF800007FF8000000D50000150023
-:1065A0000000FF00000000000000FF0000000000ED
-:1065B0000000FF00000000000000FF0000000000DD
-:1065C0000000FF00000000000000FF0000000000CD
-:1065D0000000FF00000000000000FF0000000000BD
-:1065E000000019000000000000000000FFFFFFFF96
-:1065F0000000000003938700000000000393870061
-:1066000000007FF800007FF80000068E00003500D3
-:106610000000FF000FFFFFFF0000FF000FFFFFFF64
-:10662000000000FF0000FF000FFFFFFF0000FF0061
-:106630000FFFFFFF000000FF0000FF000FFFFFFF44
-:106640000000FF000FFFFFFF000000FF0000FF0041
-:106650000FFFFFFF0000FF000FFFFFFF000000FF24
-:106660000000FF000FFFFFFF0000FF000FFFFFFF14
-:10667000000000FF0000FF000FFFFFFF0000FF0011
-:106680000FFFFFFF000000FF0000FF000FFFFFFFF4
-:106690000000FF000FFFFFFF000000FF0000FF00F1
-:1066A0000FFFFFFF0000FF000FFFFFFF000000FFD4
-:1066B0000000FF000FFFFFFF0000FF000FFFFFFFC4
-:1066C000000000FF0000FF000FFFFFFF0000FF00C1
-:1066D0000FFFFFFF000000FF0000FF000FFFFFFFA4
-:1066E0000000FF000FFFFFFF000000FF0000FF00A1
-:1066F0000FFFFFFF0000FF000FFFFFFF000000FF84
-:106700000000FF000FFFFFFF0000FF000FFFFFFF73
-:10671000000000FF0000FF000FFFFFFF0000FF0070
-:106720000FFFFFFF000000FF0000FF000FFFFFFF53
-:106730000000FF000FFFFFFF000000FF0000FF0050
-:106740000FFFFFFF0000FF000FFFFFFF000000FF33
-:106750000000FF000FFFFFFF0000FF000FFFFFFF23
-:10676000000000FF0000FF000FFFFFFF0000FF0020
-:106770000FFFFFFF000000FF0000FF000FFFFFFF03
-:106780000000FF000FFFFFFF000000FF0000FF0000
-:106790000FFFFFFF0000FF000FFFFFFF000000FFE3
-:1067A0000000FF000FFFFFFF0000FF000FFFFFFFD3
-:1067B000000000FF0000FF000FFFFFFF0000FF00D0
-:1067C0000FFFFFFF000000FF0000FF000FFFFFFFB3
-:1067D0000000FF000FFFFFFF000000FF0000FF00B0
-:1067E0000FFFFFFF0000FF000FFFFFFF000000FF93
-:1067F0000000FF000FFFFFFF0000FF000FFFFFFF83
-:10680000000000FF0000FF000FFFFFFF0000FF007F
-:106810000FFFFFFF000000FF0000FF000FFFFFFF62
-:106820000000FF000FFFFFFF000000FF0000FF005F
-:106830000FFFFFFF0000FF000FFFFFFF000000FF42
-:106840000000FF000FFFFFFF0000FF000FFFFFFF32
-:10685000000000FF0000FF000FFFFFFF0000FF002F
-:106860000FFFFFFF000000FF0000FF000FFFFFFF12
-:106870000000FF000FFFFFFF000000FF0000FF000F
-:106880000FFFFFFF0000FF000FFFFFFF000000FFF2
-:10689000000000FF000000FF000000FF000000FFFC
-:1068A000000000FF000000FF000000FF000000FFEC
-:1068B0000000FF00000000000000FF0000000000DA
-:1068C0000000FF00000000000000FF0000000000CA
-:1068D0000000FF00000000000000FF0000000000BA
-:1068E0000000FF00000000000000FF0000000000AA
-:1068F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
-:10690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
-:10691000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
-:10692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
-:10693000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
-:10694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
-:10695000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
-:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
-:106970000000100000002080000031000000418075
-:10698000000052000000628000007300000083805D
-:10699000000094000000A4800000B5000000C58045
-:1069A0000000D6000000E6800000F700000107802C
-:1069B0000001180000012880000139000001498011
-:1069C00000015A0000016A8000017B0000018B80F9
-:1069D00000019C000001AC800001BD000001CD80E1
-:1069E0000001DE000001EE800001FF0000000F80CA
-:1069F00000007FF800007FF800000344000035002D
-:106A000010000000000028AD000100010005020692
-:106A1000CCCCCCC5FFFFFFFFFFFFFFFF7058103C41
-:106A20000000FF00000000000000FF000000000068
-:106A30000000FF00000000000000FF000000000058
-:106A40000000FF00000000000000FF000000000048
-:106A50000000FF00000000000000FF000000000038
-:106A60000000000000000001CCCC0201CCCCCCCC5A
-:106A7000CCCC0201CCCCCCCCCCCC0201CCCCCCCC80
-:106A8000CCCC0201CCCCCCCCCCCC0201CCCCCCCC70
-:106A9000CCCC0201CCCCCCCCCCCC0201CCCCCCCC60
-:106AA000CCCC0201CCCCCCCC00000000FFFFFFFF1F
-:106AB000000E0000011600D6002625A0002625A005
-:106AC000002625A0002625A000720000012300F367
-:106AD000002625A0002625A0002625A0002625A00A
-:106AE0000000FFFF000000000000FFFF00000000AA
-:106AF0000000FFFF000000000000FFFF000000009A
-:106B00000000FFFF000000000000FFFF0000000089
-:106B10000000FFFF000000000000FFFF0000000079
-:106B20000000FFFF000000000000FFFF0000000069
-:106B30000000FFFF000000000000FFFF0000000059
-:106B40000000FFFF000000000000FFFF0000000049
-:106B50000000FFFF000000000000FFFF0000000039
-:106B60000000FFFF000000000000FFFF0000000029
-:106B70000000FFFF000000000000FFFF0000000019
-:106B80000000FFFF000000000000FFFF0000000009
-:106B90000000FFFF000000000000FFFF00000000F9
-:106BA0000000FFFF000000000000FFFF00000000E9
-:106BB0000000FFFF000000000000FFFF00000000D9
-:106BC0000000FFFF000000000000FFFF00000000C9
-:106BD0000000FFFF000000000000FFFF00000000B9
-:106BE0000000FFFF000000000000FFFF00000000A9
-:106BF0000000FFFF000000000000FFFF0000000099
-:106C00000000FFFF000000000000FFFF0000000088
-:106C10000000FFFF000000000000FFFF0000000078
-:106C20000000FFFF000000000000FFFF0000000068
-:106C30000000FFFF000000000000FFFF0000000058
-:106C40000000FFFF000000000000FFFF0000000048
-:106C50000000FFFF000000000000FFFF0000000038
-:106C60000000FFFF000000000000FFFF0000000028
-:106C70000000FFFF000000000000FFFF0000000018
-:106C80000000FFFF000000000000FFFF0000000008
-:106C90000000FFFF000000000000FFFF00000000F8
-:106CA0000000FFFF000000000000FFFF00000000E8
-:106CB0000000FFFF000000000000FFFF00000000D8
-:106CC0000000FFFF000000000000FFFF00000000C8
-:106CD0000000FFFF000000000000FFFF00000000B8
-:106CE000FFFFFFF3318FFFFF0C30C30CC30C30C329
-:106CF000CF3CF300F3CF3CF30000CF3CCDCDCDCD66
-:106D0000FFFFFFF130EFFFFF0C30C30CC30C30C3AB
-:106D1000CF3CF300F3CF3CF30001CF3CCDCDCDCD44
-:106D2000FFFFFFF6305FFFFF0C30C30CC30C30C316
-:106D3000CF3CF300F3CF3CF30002CF3CCDCDCDCD23
-:106D4000FFFFF4061CBFFFFF0C30C305C30C30C3AC
-:106D5000CF300014F3CF3CF30004CF3CCDCDCDCDEC
-:106D6000FFFFFFF2304FFFFF0C30C30CC30C30C3EA
-:106D7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDD
-:106D8000FFFFFFFA302FFFFF0C30C30CC30C30C3E2
-:106D9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB5
-:106DA000FFFFFFF731EFFFFF0C30C30CC30C30C304
-:106DB000CF3CF300F3CF3CF30020CF3CCDCDCDCD85
-:106DC000FFFFFFF5302FFFFF0C30C30CC30C30C3A7
-:106DD000CF3CF300F3CF3CF30040CF3CCDCDCDCD45
-:106DE000FFFFFFF3318FFFFF0C30C30CC30C30C328
-:106DF000CF3CF300F3CF3CF30000CF3CCDCDCDCD65
-:106E0000FFFFFFF1310FFFFF0C30C30CC30C30C389
-:106E1000CF3CF300F3CF3CF30001CF3CCDCDCDCD43
-:106E2000FFFFFFF6305FFFFF0C30C30CC30C30C315
-:106E3000CF3CF300F3CF3CF30002CF3CCDCDCDCD22
-:106E4000FFFFF4061CBFFFFF0C30C305C30C30C3AB
-:106E5000CF300014F3CF3CF30004CF3CCDCDCDCDEB
-:106E6000FFFFFFF2304FFFFF0C30C30CC30C30C3E9
-:106E7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDC
-:106E8000FFFFFFFA302FFFFF0C30C30CC30C30C3E1
-:106E9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB4
-:106EA000FFFFFFF730EFFFFF0C30C30CC30C30C304
-:106EB000CF3CF300F3CF3CF30020CF3CCDCDCDCD84
-:106EC000FFFFFFF5304FFFFF0C30C30CC30C30C386
-:106ED000CF3CF300F3CF3CF30040CF3CCDCDCDCD44
-:106EE000FFFFFFFF30CFFFFF0C30C30CC30C30C3DC
-:106EF000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD98
-:106F0000FFFFFFFF30CFFFFF0C30C30CC30C30C3BB
-:106F1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD76
-:106F2000FFFFFFFF30CFFFFF0C30C30CC30C30C39B
-:106F3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD55
-:106F4000FFFFFFFF30CFFFFF0C30C30CC30C30C37B
-:106F5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD33
-:106F6000FFFFFFFF30CFFFFF0C30C30CC30C30C35B
-:106F7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0F
-:106F8000FFFFFFFF30CFFFFF0C30C30CC30C30C33B
-:106F9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE7
-:106FA000FFFFFFFF30CFFFFF0C30C30CC30C30C31B
-:106FB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB7
-:106FC000FFFFFFFF30CFFFFF0C30C30CC30C30C3FB
-:106FD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD77
-:106FE000FFFFFFF3320FFFFF0C30C30CC30C30C3A5
-:106FF000CF3CF300F3CF3CF30000CF3CCDCDCDCD63
-:10700000FFFFFFF1310FFFFF0C30C30CC30C30C387
-:10701000CF3CF300F3CF3CF30001CF3CCDCDCDCD41
-:10702000FFFFFFF6305FFFFF0C30C30CC30C30C313
-:10703000CF3CF300F3CF3CF30002CF3CCDCDCDCD20
-:10704000FFFFF4061CBFFFFF0C30C305C30C30C3A9
-:10705000CF300014F3CF3CF30004CF3CCDCDCDCDE9
-:10706000FFFFFFF2304FFFFF0C30C30CC30C30C3E7
-:10707000CF3CF300F3CF3CF30008CF3CCDCDCDCDDA
-:10708000FFFFFF8A042FFFFF0C30C30CC30C30C37B
-:10709000CF3CC000F3CF3CF30010CF3CCDCDCDCDE5
-:1070A000FFFFFF9705CFFFFF0C30C30CC30C30C3AD
-:1070B000CF3CC000F3CF3CF30020CF3CCDCDCDCDB5
-:1070C000FFFFFFF5310FFFFF0C30C30CC30C30C3C3
-:1070D000CF3CF300F3CF3CF30040CF3CCDCDCDCD42
-:1070E000FFFFFFF3320FFFFF0C30C30CC30C30C3A4
-:1070F000CF3CF300F3CF3CF30000CF3CCDCDCDCD62
-:10710000FFFFFFF1302FFFFF0C30C30CC30C30C367
-:10711000CF3CF300F3CF3CF30001CF3CCDCDCDCD40
-:10712000FFFFFFF6305FFFFF0C30C30CC30C30C312
-:10713000CF3CF300F3CF3CF30002CF3CCDCDCDCD1F
-:10714000FFFFFF061CBFFFFF0C30C30CC30C30C396
-:10715000CF3CC014F3CF3CF30004CF3CCDCDCDCD1C
-:10716000FFFFFFF2304FFFFF0C30C30CC30C30C3E6
-:10717000CF3CF300F3CF3CF30008CF3CCDCDCDCDD9
-:10718000FFFFFFFA302FFFFF0C30C30CC30C30C3DE
-:10719000CF3CF300F3CF3CF30010CF3CCDCDCDCDB1
-:1071A000FFFFFFF731CFFFFF0C30C30CC30C30C320
-:1071B000CF3CF300F3CF3CF30020CF3CCDCDCDCD81
-:1071C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F9
-:1071D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD75
-:1071E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D9
-:1071F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD95
-:10720000FFFFFFFF30CFFFFF0C30C30CC30C30C3B8
-:10721000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD73
-:10722000FFFFFFFF30CFFFFF0C30C30CC30C30C398
-:10723000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD52
-:10724000FFFFFFFF30CFFFFF0C30C30CC30C30C378
-:10725000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD30
-:10726000FFFFFFFF30CFFFFF0C30C30CC30C30C358
-:10727000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0C
-:10728000FFFFFFFF30CFFFFF0C30C30CC30C30C338
-:10729000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE4
-:1072A000FFFFFFFF30CFFFFF0C30C30CC30C30C318
-:1072B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB4
-:1072C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F8
-:1072D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD74
-:1072E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D8
-:1072F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD94
-:10730000FFFFFFFF30CFFFFF0C30C30CC30C30C3B7
-:10731000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD72
-:10732000FFFFFFFF30CFFFFF0C30C30CC30C30C397
-:10733000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD51
-:10734000FFFFFFFF30CFFFFF0C30C30CC30C30C377
-:10735000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2F
-:10736000FFFFFFFF30CFFFFF0C30C30CC30C30C357
-:10737000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0B
-:10738000FFFFFFFF30CFFFFF0C30C30CC30C30C337
-:10739000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE3
-:1073A000FFFFFFFF30CFFFFF0C30C30CC30C30C317
-:1073B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB3
-:1073C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F7
-:1073D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD73
-:1073E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D7
-:1073F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD93
-:10740000FFFFFFFF30CFFFFF0C30C30CC30C30C3B6
-:10741000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD71
-:10742000FFFFFFFF30CFFFFF0C30C30CC30C30C396
-:10743000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD50
-:10744000FFFFFFFF30CFFFFF0C30C30CC30C30C376
-:10745000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2E
-:10746000FFFFFFFF30CFFFFF0C30C30CC30C30C356
-:10747000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0A
-:10748000FFFFFFFF30CFFFFF0C30C30CC30C30C336
-:10749000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE2
-:1074A000FFFFFFFF30CFFFFF0C30C30CC30C30C316
-:1074B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB2
-:1074C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F6
-:1074D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD72
-:1074E000000C0000000700C000028130000B815832
-:1074F0000002021000010230000F024000010330C0
-:10750000000C0000000800C000028140000B8168F0
-:10751000000202200001024000070250000202C0E7
-:10752000001000000008010000028180000B81A80B
-:107530000002026000018280000E82980008038031
-:107540000010000000010100000281100009013854
-:10755000000201C8000101E8000E01F8000002D895
-:10756000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC5B
-:1075700000002000CCCCCCCCCCCCCCCCCCCCCCCC5B
-:10758000CCCCCCCC00002000CCCCCCCCCCCCCCCC4B
-:10759000CCCCCCCCCCCCCCCC040020000000000067
-:1075A0001F8B080000000000000BFB51CFC0F00350
-:1075B0008AB7B13130ECE644F0E98159181818F86F
-:1075C00099C8D7BF1168C04E20BE01C4075948D71B
-:1075D0007F551AC15E26C9C0700A8827883330B427
-:1075E0004A21C4ED651818EE01F92BA16272403DE5
-:1075F00073A4C977F3281E3CB8D014951F620CA160
-:107600005F9840E82234F950A8BCB81E842E36C5D5
-:107610006EAE841E71F6A7A9A0F2BD55F0ABCFD512
-:1076200040E5C7A2A90F81F2017EE9B234D8030078
-:1076300000000000000000001F8B08000000000098
-:10764000000BED7D0B7455D5B5E8DA9FB3CFFF6421
-:10765000278470123EEEC400C1063C4280A0A83BC5
-:10766000FC1A7DD41E1025E5A11C446B004922A6FE
-:10767000D78C96D76CC8870450E3E751BD457BA0F3
-:10768000D88B0E5BA3A68ABDB43D887AA9C3DB2242
-:107690005AA52D7A83FA2C58A0B1572ABD4FCB5B3F
-:1076A00073AEB592BD77CEC9C74F47EF788D43769D
-:1076B000D6DEEB3BFF6BCEB95634D943F22E27E42E
-:1076C0001CFCD0A7291142A6F73DC92D5932C92368
-:1076D000E41B3E823F1FF923534816210D3EF6BCA2
-:1076E0003D10D905CF2D8D84A426C2F771491221F2
-:1076F000244848899A0B2D02B1870BE15977617CA8
-:10770000323E67C23387C8848C84F218FDBD20EBFB
-:10771000FB9C42FF399AA880F114F68AA8A43C96F3
-:10772000C2F6DF226446DF3C48DD57F578B86FDEED
-:10773000EEA7A26B24C5EB9E837F94E5598950E6A2
-:10774000FA0D47A5C79FB7D51F4FC2B9382F95A8C7
-:10775000382FDE9E108BD8E7E7EEE7A346F2F8F36A
-:10776000E3FBC32DD3B8026E6D8D3E7CB636EA24A2
-:10777000E5258436333B4BE93344CC5DA5FDDBCDB9
-:107780002312871F9F0F8C63D0FAF47F42E1DE9CA7
-:107790004B9241C0214938E0D61C5AEC33D3F42730
-:1077A0009E2497C2AD84CFB9A8FF7AFD302F0A0777
-:1077B0003FCC2B0D3C97C2BCA6F79F97BFD83DAFDF
-:1077C0006A6287CF70E7159844C821C0876A128221
-:1077D00078B9CDD19FAC9B56779AFE08A70BD5E020
-:1077E000EB1B229E822572DFF8000723E0A02F6F9B
-:1077F00034C7496F6EBA067820BE3A387CE20AE395
-:1078000007AB0F8FF4199A1D93803568F110E02DA6
-:107810009F30F8E557B7DE2A4F2194D53A0F4EA096
-:10782000F0CBEF5EB99040F9E8152780DF9ACBA640
-:1078300056CEA5F5B2CB63AF2CA04D423143027AB0
-:10784000DD0A9D15407F5FB32A68B909FAA365CBAD
-:10785000BACAB4106EA6036E1472864ACB1EF8B56F
-:10786000280DFC482F1EA473DEFEED33C1CF436C00
-:10787000F8437E5EEFA0CB8C78BF91E1CBA2FF01F5
-:10788000BE46101B5FD37EB22B35075EB25CE33C75
-:107890000ABF20BC6FFD9B8C97439EF41994CE3D8C
-:1078A000A5B29EA478CA26B16CB58CE263A14A4009
-:1078B0008EE5E4EA1290C360786926A412F89F4A24
-:1078C00007B2C826E77ECEF9AB60CDEE9DAD749CC5
-:1078D00033B34331A895AFD3B94EEDBF9E3B40BE05
-:1078E000786DE5B2E74802C7EB3C5844E76595C9B7
-:1078F000B18729DD6C2D3DACDBE5E3B15EF9E2A695
-:107900000F62A833B83CA0F0514A65D31FF9ECF4DC
-:10791000A17C4AFA08DFE8C4C770F1757A98F4F1DF
-:1079200059C71378EDCF571B055E7D847EDF52B2B9
-:1079300078407DD51FAF4F92046D172A2566324DD2
-:10794000BBFFB4EB0BF7D326DFDD72541935A36A06
-:10795000E74078CB75AE57F4EB6F508C7747D0A2E9
-:10796000AAA37CD5B81E688FDE63114A776740F6FC
-:107970005078281D17A5A04C8A49EC61D64D4AA223
-:10798000657FD44C6E413A48225EC4FCBC86EC90C4
-:10799000B36AAE530E932A4BB2CFDFDFA0E13C3483
-:1079A000182F17EC02DA2105851A2229A05B41AFB6
-:1079B000A092CE9D0F65A79DD1664C25E9F0A072DF
-:1079C000BC4B92A0D76F0D4DBEB8C75BE29CEF9049
-:1079D000DB8554E33DD1268D9CEE6BA792F7047EA8
-:1079E00028102F13761DC7D3660FD92B5D48E5C12C
-:1079F000986BC152209BE1D32C6A87C0932A9FCDFC
-:107A000063A6EA4057648FA4C23C71488A4742F596
-:107A10001DD40B4A06F623FBEA90FE9490894FF1A1
-:107A20003DF3BCD8F8BD655FA206F0531DD58C2D83
-:107A3000748E6B15D3D80874318DC9A7EAE88479A0
-:107A4000A0EF3C129BD7B7A57C5C879AD39687762C
-:107A50005906FBAE5AA52A7F2A7CDF3661207E229A
-:107A6000494F4FB70D9E6E7BF06689DA835FA2BFE8
-:107A7000CC2433018E7F8A2DCE4A0D80AFF71B0FA9
-:107A8000EAEAF83E7BD0FD7DAD42EAD2C98156C913
-:107A9000C7F8D26769601F8875AF0576A720DD1625
-:107AA000DBC4D69B9B8BF05DBBE717BA6AE3BFB51F
-:107AB00054CD78A7F65F8F80B7E8A7B77DF2A0A373
-:107AC000BDBB5D6F7F425E507B18E85CD041504A81
-:107AD0006C95E87B6F6CB105EA6CED63150CFF19D2
-:107AE000E6DF8BAF4F397FD16E30BAFAD3EEA656B0
-:107AF000D04FEF691D575D4CE9E8F74F28B14DF4C1
-:107B00006BF58E89F3C05E7A8FD3B7C0D389DD4D14
-:107B100079E9E823139E7E21F9711C415FD5F2F2C9
-:107B200001E96130FA7ACA4D5F9D577F21F475C82B
-:107B30004D5F1C1E273BD9FAC9FD23185E38BEDCF9
-:107B4000F8C988974FDBAE3F3DFD5AA27CEDEDBCF6
-:107B50003A3D3DF1F90A7C7DD6F90E4647798669B2
-:107B6000EA74FC51D48E91407F9491588ACE53A7E9
-:107B70000FD45B31A6B7845C12ED4F4BCC4E53C98A
-:107B80006BD85E21294B477BDB6967CC57E84BDA22
-:107B90004F7309497A715F64FA504F95A884E93FA1
-:107BA00033943F03EC08FEA3CC8EC1BAB3C0FE07EA
-:107BB000FD359BEB5F89DA5B747DA132E7BE37E070
-:107BC000B23F14BE5FE8676F0D737FEC97F9FE3824
-:107BD0004842A88FC4FE38037FF6EE8B395C476AB3
-:107BE000C494E9BAB5839EE42609B41B41FD4C8ECA
-:107BF0004A49E62F20256037AF970A62A00FE83E7A
-:107C0000AF278B7E7FEF070AEA878668DD8A1658E2
-:107C1000F6B50D13BBE9B8F7349269C59EBEF1EE17
-:107C2000513B7C00EFF6E2F50EBBF6BB52A250B61C
-:107C3000E91D7F549B563C0D8653DFEEA6F090293C
-:107C40002081FF02A1FBA22F18003FF6BE174EF6BF
-:107C5000B2D2BF9C0B364F011653B02F6DA7B63B67
-:107C6000B9188AA3A50A4A07ED1EFEDDFA4D05ECF8
-:107C700077DBFDACBC63D3AC8D169447F2FA561596
-:107C8000FB9ECFCAB76DFA4105EC0BDAB2E99AA9AF
-:107C9000BE6EF324ABE269F8FB365976D85F4DC669
-:107CA00082F2FF43D7E1F79917BD40E1498112B352
-:107CB0000CD26B97150ABF41C7DD952500FFD7147D
-:107CC00002F4EC3762F19B0CA43FA47B7FAE19DB7E
-:107CD000424B0DF4850CF528DE1E96605FC7EC3133
-:107CE000F0E79C43FAA57C41BFAFCFD6B13ED16D42
-:107CF000F659519F3DD68B2717DEEE557BFC80B79A
-:107D0000EF8DF9F01713693FD642390664F3BD0DC4
-:107D100045D92B6D787CCC37A70AF0489A73D12EC1
-:107D20008992DE1F13CA62DF5C403A2BC0781C4385
-:107D3000251FA1743A2EDE53012830AAF4E7708F74
-:107D40004BE6E9EFA15DA548E7BE34743BCA0D07D9
-:107D5000DAE3A845543E8D90483C9DDC5DA9E6A041
-:107D60003C185149D73B809FE09B549F30FB2CE14E
-:107D700003FF56A67132CDF333C073934CC71D4D2C
-:107D80009208A7C1E09A099EADD127B3515E7FCE7C
-:107D900070CDD4DE0DCF1112E397956A39F2CB5036
-:107DA000FD3B6D7C3FD5027E38FA6CE27E38777BF6
-:107DB000BFDA416269F0EB379CFE210DF625B67201
-:107DC000BD6C307D1072FB89189EDD7A6101D70B86
-:107DD0002D51AA17983C5C087A20C8E1DF02BB7ECF
-:107DE000909F6192B4E8F720F707915226FF7DF447
-:107DF0003FE0B751554E7DA00D511FBC2BC55F9084
-:107E0000910E8904F3BB5FEAB86202D04F3EB3C75C
-:107E1000A337B445133638D4CB4CDF097D962C16E6
-:107E2000FA8C20FCCEE37348920E3FE8C307362C51
-:107E3000CE42BFDD8D41871C8AB62EC6FDAF8D9E1A
-:107E4000D12FDAC1FDA399F0A76BC9443A7958A89C
-:107E5000307918317B52E0F34342CEE32E434ED6C5
-:107E60000CFEC4B10F8B4CED39783E5DEFCE8BE448
-:107E7000D826DA4E9DADA63C14BE6AF98B55127D0C
-:107E8000EE2C64F0B76611A4D390B1E08402FA58E6
-:107E9000ED467F4DA8D2BD2FB69515E8A7E77AD459
-:107EA000DF763FF500FBB8A13E9B28BCDEB6F13F74
-:107EB000855C4AA1EB50371003EC09D5A4223102AE
-:107EC0004F3D0FE8453563217C765754C2F3BCD94A
-:107ED000F14AD9A6075433BE05EA8FF8CA7DEDB042
-:107EE0005EF526595624C6073936789B4AA1633F6A
-:107EF00097ADBBFCA589D62AD4EF8646C617F69F58
-:107F000077BDAC72B9E7A417412703C8BBCF441FA4
-:107F10006FCAC25FEDC4BF834E8AFAF02BDA85FACE
-:107F2000F9AB9CF875973F6FBCFA014F141FE751EE
-:107F30003C017D9E379BD123B547D17E7AC0D76166
-:107F400002BC1F2836644BEA6B175672989FF92CB7
-:107F5000DD6851BBE7FE95DB4D68975F4C6580841B
-:107F6000CFB4FEA37A59C376542E542ACC6E97C050
-:107F70001E9FAF6CAB82F63B295E81DF77027F43A9
-:107F80007C20A1A11CAE97DB2B36D2BE5B8F4AB200
-:107F90000246ACBE14F1EBE7FCFE912751097EC806
-:107FA0002DFF4B26BB0CD04B03FBBD9A38BE4519A9
-:107FB000FC0D609F8CA9D3A702D833B5DB5E275791
-:107FC000A65B57B5C2F07F47DDE10E344F9F77EED9
-:107FD000473CCB4DA048D897542B36FA0E97317FAB
-:107FE0000749D0F5407D4E371F150E4CAF0FBAE64E
-:107FF0003F96C753DCF55E56B8BFCE60F03244FF03
-:108000001B07EE5FC0E76C9BC2E323D40043221E34
-:1080100049ECFA5BB9F15005BCA75CB709F0B55D56
-:1080200026D5CCDF1C473D14E1E3ED2CCFC1F60B88
-:10803000552647C79AFA16C0F7D866192C05F2B824
-:1080400062E0FB51CBEBF67B281EDA0B492C64E097
-:1080500010D8EF8BE335A4CBFC5CA6C7F2EB290963
-:10806000D07AF9A52469D0F6EDFB1FA8D068394273
-:108070003754600AFBCA193E7D252406A690C72204
-:1080800029997D4F424C5229EFB140951E183F036C
-:10809000F75F77E69298D7E8931B82AEEE6CBEC787
-:1080A0000F7AE481E27BAE9800FEC65215FDE4E44F
-:1080B000630A27E14F54205E163761BCF6596CDE27
-:1080C000F40DE253D5D9FAC7DC3F1BF9A43DFC34CB
-:1080D000CEC35A4762E3B15E8C60FC860A54F05707
-:1080E0003655337BD78D8FF524F1B832DD4EAF870F
-:1080F000906EDA3F51F8BEE0C58D60E78F835F690F
-:10810000F9974D7FDC381CBB45C40F85DDB245EDCA
-:1081100044BEB728CF815E12768CBFB813C7FDBFAF
-:108120009CDE87DABFBFC4E96F75DB356E7BA65E68
-:10813000D61DF6AB7B5D1F795257C0FCB6E4537E6B
-:108140004FA3077E03FA9AB6DF115DFCAB89465F49
-:108150003F7D72C8C0EFA23CE6AC86F8197A7D2A52
-:10816000F7608F6632BE1A2BE4D037285F0D107F80
-:10817000147CF511151287804FD40EA42F6296201F
-:108180005F097E51BA3BDACFA7F460D4CBE0B906E1
-:10819000FE2239B45C48E93D65B38784BC504B3B53
-:1081A000E313A5FE74F7A021231ECF94317F7596AB
-:1081B000D56D4293606927C6F5285DFD17D095AA55
-:1081C0002725C0EB98FB17E0BA7EA93056F7AB2CF9
-:1081D0007EEC5EC7CF397C89BE1BED793F1B8EB22A
-:1081E000F87D31363F579CBDFE5703C6D9FD319708
-:1081F0009D334C3F428ECAFD08DCEF3558FBE1C68B
-:10820000D795B323903E7ACB19E4ED4D2AE78BA3A3
-:10821000BB1C70E9070F65476CA0F9F9859FFE53F9
-:10822000C60550870D010E6E385EA23AFD879F3756
-:108230001CDDF1EF97B8DC1F4C1E044D33252BE0FD
-:108240003F23CCBF1322DCBFE3A4F79DCD32DA215C
-:10825000C1B0BC134CC9ACFA6ED4C1627C4AEF55B4
-:10826000AA8DDE47971E4A413BB73ECAA4870693B4
-:10827000B7AB7CE60D2ACAADF4FBF1BE7C03CA2580
-:1082800069F20D32E2B5EEF3C937182ABC7BFD9BCB
-:108290003C7FE0867241C7C6D2DF51B8AC3EE821D0
-:1082A000E897F998AECE16575BCDF78137F07DE4AD
-:1082B0008D241E818FA7885C09FC728A1C8E4CB3AA
-:1082C000C993FB548DF14B9BE76DF0AF8A78F94D64
-:1082D0001DAC2CE673F3FDCEF2D7C9E23CF0EB7D8A
-:1082E000FD3E0FE26BB5CBBFD6AC32FD7133A96B4F
-:1082F00005BCB5784815C8B11B74A28EA0A6EBBA10
-:10830000671E9CB19296BFCBED91F7A95C366C715C
-:10831000D035A1A406F87DA76BDAB59710689F6CDD
-:108320002D807D5A36C17DAB1BCEABDA9CF31B6C26
-:10833000FEEEF952F2C2F9669A87BA474A6B4F3F8E
-:1083400022E40DC757A6BC2A914FF50B20205ADF17
-:108350009A43D8BEF3AD60B209E535CBA71AACFDA0
-:108360002F55463F9FB6FDAB83B45FE7EB5900CC7A
-:10837000D6966BC5C12F24E28235A4CE1C4D7F5505
-:10838000F72DB246135BBDE810EB150F5C2FD3BC85
-:108390004FE83E4BBEB06FFEDF9512C7D434F3BF3B
-:1083A0005D49D440FF5EC083024F15F18D7E608A27
-:1083B000DF5A35D4266541BE5317EE03FD86EAA089
-:1083C000875AF805E45A09936BC112E777B77FF82B
-:1083D0004355C4E153C87F188236C07E08A514F007
-:1083E000DF94AB277BEBD3F16A605D1742298E7275
-:1083F000A35E67F56B8871D7EC32E43F8C3FD4B74E
-:108400009F8F71F5FA9106FA77551233B10F17DD88
-:10841000D59E9548D2A60F6BD51E0DF8AC96DA45C1
-:10842000F6F7EBA38AC34FEB7E7AA8E51C2A817D81
-:1084300092CCFC483A2DDBD6FDA70E89E7AF185940
-:108440004B06F0DFAD8F327FF00DEDE3B398DFD058
-:10845000297F4F3732BFDCBF3DF67D0DFCFCA71EE8
-:108460003D7615C07BEDBF2AC407F91B8F85490AED
-:10847000EDB1A406F6D89A2EC54CA6CDAF6862F130
-:10848000CFC7C388AF354F7A930B69FB354FBF33E6
-:1084900085D0F99DDED4F3E268B09B1F95581E820B
-:1084A000D53DE56AFA7E8D4A56A4F31B4CF630F9A9
-:1084B00073F2D96015F0B7B467FFF5D86FE7528F44
-:1084C000D7B6DF2EF678906F693D66973F2225C7B5
-:1084D0004BE9E6C7F23F4E3E22B1F9EDF524FD30FF
-:1084E000BF3D3BB5049D47ED9E0F509ECC7DFC8764
-:1084F000118043ED5EC5A1076AF72829EF147C1EA1
-:108500008327C48DA41940279C5EBAD661BCA8A657
-:1085100073EB07E0C7A8DDEB946B142EB114C0F524
-:108520000D25B610CA4FFD4BC4A0A07AFFD0C311D1
-:10853000802BED77A59605FAC649DFD0FFD99CFEC2
-:10854000FD11D283F1BADACE76365ED7577E0F7A36
-:10855000A5D6253FDF875FF2FBDB33D7785CF6CC0F
-:108560009EA1C5EBD6FEF0CC43161DF7E4937F78B1
-:10857000C8A2F3BFE5AFFFF9D0B7803F7FE6D74190
-:10858000FED73EFAEB08B1D163AD87F1E3E9B1C4A0
-:10859000A27B5472FA37DE24F84B4EFFF4F7E30C5B
-:1085A000BAEED34FFC25CFA0F5EB7F3A7F14C0A1E4
-:1085B000FEC773470DB4FF067A4D7AEDF34A225E8B
-:1085C0008DBD123382F6F1A70B3F07BA0E8C83796B
-:1085D0009E3AE28D81DBB996BE6B980AF85A87FA0B
-:1085E00018CA1B289C6B1EDBFC01C889FEF0B6462E
-:1085F000CBE8AC4F8D06A77D4DD73B0B106FA40782
-:10860000F5A8BB7EED6B149F1766C6DF19F2B106A5
-:10861000F2AEF6B176365E27C55FA43FFE4EC12F9F
-:10862000B3FAE3EF0E17FECE905BBE970F798D5D28
-:10863000231C7152F1EC8B0FC6B3E203C80B210F60
-:1086400006836FB5C4E6B5CC633EE801BE7A32D886
-:108650008BDF8580DF1F9E1947287D1CF7F45C0F98
-:1086600072B3E7A75E7D177DBFE6A76F209F9DFED3
-:10867000F12B9A81F9992424E5F13C31F67308E451
-:10868000700DDBCB91DADDE19437D287A79AE4A2B3
-:108690004A2382EF8FE1FB24A3FF9AE4FE25521ABE
-:1086A000BCBDE1296276407224C265DDEEDF69CC93
-:1086B000BEECC3A7540EF83CB600DE67C2A758BF95
-:1086C0000EEB9F69C3EB6EC6B7EEFA35943F41EFF0
-:1086D000F5C36F527A039EA7777A55D07BA7C1FE68
-:1086E0000AF5C77B1FFC99FD33DCFDCA2B6EFE1615
-:1086F000F1630E87CCF461713B60E0F50D177E3FAE
-:10870000F7180E3A12703CF9717AF97F8ACB8D1AFC
-:10871000625516D8EC139F87DA27905F46E2D6E8B9
-:10872000C2BEF99E847D04A5BF938F2A18AF69ED60
-:108730003C8072DC2D2F6A48FA7DFB5F3DCC5EAC3D
-:10874000D9BB7F0AC8B593CF3D8BF459F3D8310D0F
-:10875000F62F2FEE794AEB2EEDE307D00F499B7EE3
-:1087600038F9A3FD53983C48BFFF0D6AACFFDA7D92
-:10877000CEFE6B1FFBC0D1FF5AAB5363790C038F46
-:10878000F3BE6A2E85F5BE7FC843409EBEDFA9A416
-:10879000F5BFF670FD28E0D4FACA82DF419CBFEC39
-:1087A00070C0003DDAB5C91C7507D86B873D04E47D
-:1087B0003751CD3F7869B9EB9500C633BA0E5FAB40
-:1087C0001836FFC4332E78CE7CCD9A1BA6FDCDEC97
-:1087D0008E97C116CA2D37CA8FD27DA3DD7FF54A89
-:1087E000E52890FBCD60CF4F84F16251F07F289156
-:1087F00005952C7F50D6FD69F537EBCF138A63BE04
-:10880000A047977B7DB6488F62BFC5FD4DADA1F4F3
-:10881000FEE8059AD817D0716D7290DAAA55E9F082
-:10882000364B637648A6EF976ACCDF93E97BC52089
-:10883000ED7BF99BE3470BCBF174F39EC6FB71FB19
-:108840005733C9030FEFA74C331CEB05782FB2E564
-:10885000C58F26C98D90274A4221773C3AEEB3C78F
-:10886000A3AB0EED87F873EED5FBF201FE11D2AC8F
-:10887000BF87763C899D1BC08E75C79FDD7989991E
-:10888000E2D1BE50CD9114E9DF5FFFF8BB897928B2
-:10889000CD63E6F90A6DF1F766BD5FFC7DBD46C7A5
-:1088A0006DC9808725DA9C7FD280BE649248F77DAF
-:1088B0000BA79BCB49F7532B619E3116BF9FED82CF
-:1088C000D7A51C5E3F3B9F2E9CAA9E0A62A81E0A4B
-:1088D000DFB94BCC661081F397F7ACDD0F7C26E255
-:1088E000F7D644F95C70E8F01B6E5EC42ADFE27BC9
-:1088F000B521E445103D27AD5EE89B87C5F755518E
-:10890000DC2779389F1D78F3661FC82D95242A0B24
-:1089100061BFC4E39A986F4FFBCB4BF98949E7AB32
-:10892000E906DADB79A9D50FDC0471757D0CC62365
-:1089300094B397A0FFD0DDAF128D59980F16322A4D
-:1089400014DB38ADB92C3EA3EAF1B479C3ABB4C49F
-:1089500013B05EE5EC65D8AFEC8B613D121A5ABEE0
-:10896000EC77AE8E207C7D14BE201F1164B02E9E4D
-:108970003775F7D511D433FE839E9DF0DD1F6279E4
-:1089800054B7CB8118E459B9F3A82ADE6A27D05F1F
-:10899000EB3109E328827E5B0BEBCE03393E401EB0
-:1089A000D54B9ACDAF9E298FCA1FBA11F3A8FC9F51
-:1089B000368FCA2A9807F6586B361179559644E7D0
-:1089C000D1CAF3A2FEA3F5A5B9A09F5AFDE2FBCB45
-:1089D000734D7BD95A7F00CB3CEF6AB4B7BD09EA2F
-:1089E000E78E26759DE8CF33C93536391BF1AA08C5
-:1089F000E77FD6CC7735479E7CD4115F3AF0E666A8
-:108A00001FE86FFAAC2C02F851BA02BB3D2FD54ECD
-:108A1000ECFA483C051DB5160F1CBF53CF5E847E93
-:108A20007C51F6E949D34C537FBE8FD91F827E7D9E
-:108A3000B924097AC967241EB809E83937140B32FA
-:108A4000BAC438595B08DD53FDD6D1567C03C6DB6A
-:108A5000CEE804B95ED071FFF95FC6E75F64615C80
-:108A60002244309E96791D65B88E559A19F6DAE043
-:108A7000987B5EFABCD4BBBD6C3D2DF1E52CEFAC10
-:108A8000DA198715791AA27E504A1478411EE6B287
-:108A900038ACEC63FCD6872FAA2A6CFECD26B2DC5C
-:108AA0000212509777E2D146554F62FD127FE27C69
-:108AB000AF233ED7CDE2BAAE78E27CE516C6DF83BF
-:108AC000E04F9CCBD80A71B789109F8BF2F37D06DB
-:108AD0008FD3992CAF28033DB5150F1C87EA688CFE
-:108AE00061FBBB1ACB59BE9244B85F3BD9047402F8
-:108AF0006E0946F73F6802BE092B822F7E88E53B50
-:108B00002556BEC9FBCC5CC8373CF0E61B55AB28EC
-:108B10007DB49A01E4FFC1D6A72767205E873B4E4C
-:108B2000FFF5B271DBCC10EE77075BB79E62E30E08
-:108B3000751C115FEB5B9F0FC769350619A7838D05
-:108B400033F8FC199FDCB17F35E62FF828FFFBE9ED
-:108B50007BDFEC1E9248D37F16E79F036F7A515E4E
-:108B6000B7E5B2FC284F49C8644E4067FF9ED2BCAF
-:108B70003978DEA1EC02CC9FBF637F3BCA190DC6DA
-:108B8000A1553CB1D04AD62E61C239DBC83C82F136
-:108B9000674F49DE2A78DF403AE273400F97CB2CCB
-:108BA0003FB9A4E426E8271BF892CEA3DCC7F69DC4
-:108BB0009E928B6F86FAFBA7BF9E68023895333A68
-:108BC0002007F31D706C358AC4B99D01F9DE53EEA0
-:108BD0008C5B109F33FF93A84B306E4EE54287D7D6
-:108BE000665752BD781FF23329B3C0DEDBFEB56B8A
-:108BF00063767EFE672DFE1D565FE46B093E4F9F38
-:108C000037D79A2BF2E6123EA50CCE29F5E6532F64
-:108C1000CCB7E77FF17CEA90C8A7E6F1CC0EFA5F0B
-:108C2000BAFC39F739C6CF2B9FFA292FDF0F07C9B6
-:108C300058C8A7FE8987C4529017F36B250679316F
-:108C40006EFA70F7E73E07D06B8F64E0E7F7013804
-:108C500036B9979F70E1ED463FC6E7C478CF837C75
-:108C60002A1D9C4F47573BFB195BE73C9F755E8372
-:108C7000335E55681538EA9FDF56E4F83EBEE302DE
-:108C8000C7F789F74F759427252F76D4FFD29E39E1
-:108C90008EF2E4CE2B1DF52FDCBBD851BE28B5CC0F
-:108CA000517FDAC11B1CDFA71F5AE3F83EF3C87AD5
-:108CB000477956F7371DF51BA87902F92C7040004B
-:108CC000F7ABDB46CB76FA6CCFA67A250BF3B8353B
-:108CD0009ED48FF166968BDC9767E06EA7146BA627
-:108CE0004EF9573126CCD331CFF046E423A5386F67
-:108CF0008E81EF672C00BF132963E7B444FCDA537D
-:108D00004C527EC8EF0BB9F0EB8A4B7B946D29C0B7
-:108D1000B376F4CB07A5487FBC7AA2EE7CC6A1C58A
-:108D2000B555E3B3E507E4F9385F8CA57C817EC4D3
-:108D30008F15D8B7907961B40F6CFB1B84A3D8DF73
-:108D40005CE623CD0053C11715CB7B46BF80D5C44D
-:108D5000BEC62B0F272FB9BF5EF1A2DD25E4CC6084
-:108D60007A45494E73E421B89F54FE95F9609F1EE1
-:108D70005986F2A8775FD02B1FE333E1BB478DA163
-:108D80007CEC957F7B0A1C7261A8F6995B4EDF052F
-:108D9000421FCF05A597D711C80BA372E9CEABAF81
-:108DA000C23818A9278EF3807955711FE83D6A975C
-:108DB0007DC567DB3F47CA997DF6F766A78660BD2C
-:108DC00036F927EC5501D7118575718CEB85650255
-:108DD000FBAAA6D9B128F801DBA08A6D9FF65DDF5A
-:108DE000F958BF39A4C9E02F6D3E381FE3035E7FF9
-:108DF000DC0779CE4D9E7825ACAB295BD6D3E53B1D
-:108E00006DF631FF8CD6109CB67B00FAD034BAEFE9
-:108E10004FB3DE7FF131BF4BB3BEF820E8B99CB051
-:108E20006640FE44EBFE598B305F77A1AAC3BE9625
-:108E3000D04DDC3BB6B8222171F46769B932EA45FE
-:108E4000AD2182E30F36DF5B7DCCCFE06DF00F38D4
-:108E50005FAF96DE4F9169BE9B61BEB983CFD70BE2
-:108E6000F39560FC108EBFC9C7F0E886BF87986D88
-:108E7000F368BD96635FEE28468A61F97AF72E9C07
-:108E80008A744A05B5837EC53E82D2EFC340BF6275
-:108E9000FF2ECEB3DEE263790902AFC460FE881113
-:108EA0000915F7BD3909B6FFED931F8C8E723C3161
-:108EB00082E7BFC6A8189704378DDD8FA1F8D9BE09
-:108EC000C77B690CF1D5FE15956C027A2BA6EB8158
-:108ED00073B90759DCA9DD13AB8A87FAC613EDDF36
-:108EE000E1FB40952CC9C27B529485D174F6672F63
-:108EF0009D73B8B9E5EC011FCFC3CA27F94CCE96D4
-:108F00002E85A34499FA71DB1B0DDCAF3CFCF329E1
-:108F10001D08CFF631F7A11D2DFC63245A3688BFFA
-:108F200087C54BFBF0BCD448513CAA574C45A75FC2
-:108F30007B31C7739D2B9F97E359E057F8ED493478
-:108F400017F95AE05B017802AE94D9D181F495C249
-:108F5000F9C60DCF53FF4DE17904D600743B96AEB0
-:108F60001FF8E6C01504E3602E7E14ED04DDBBD7C8
-:108F70001FF6FFF75EBFA087CCF5ADB4FB0F11D78E
-:108F80000D737AF371BDF942F9DB6D709E44CD65C6
-:108F9000FBDD7079F3AD329CC320960EFEB5B03880
-:108FA000BF53E6BC7F2450EADC7FF85CF74D78F8CD
-:108FB000FEA3DFFD2ADCCE12E7F9DDF377E36BAE2B
-:108FC0003F7D1E261993DEEFEA8EC789F886C88397
-:108FD00015710084035DBF67961C47F95746CC9D09
-:108FE00069E4D3323FD30B5DCFF9314F225CA5A1A9
-:108FF0003FB6A02C5501E5823A12033D71F1F143D1
-:1090000024413BBD20C0E47E41595202BF47C149C3
-:109010009617B89DC72B0BEA93D24ADB38969FE987
-:10902000AD8FDEBC1DE5E37363595EFA6D15CC7E32
-:109030003B14BDA1A302C62D67F9E461BA5F84BCED
-:10904000B1F0116F12EDADB26E027E54AA05AC30D4
-:10905000FD7EBC914CBD713CE47DF9F079B251C705
-:10906000E781B1DAFECB69BDF5850103FA6D290A06
-:10907000B0F3BD611FEEF7FF9CFD75F4AB9E6E8CE7
-:1090800062FDB66F9B685734EF3F817EC3A0392DD8
-:10909000C6FCA8A642CA613E874CF0731035662C08
-:1090A00086EF077E83F5142DF11B0BEC93651AEE0A
-:1090B000EF010E104F68F2B37CB9CDFEBA68363CB2
-:1090C0000BC98A4569E0BD82EB1D4A518A96D79744
-:1090D00087A495A7942CF02797914EC873F7B424D2
-:1090E0002B404F93D5BA01E38CF1252BC07F3CA6D2
-:1090F0005A8F810F5D2B67E745043E3C7E127F222D
-:1091000004F552D2AD74DC89011DC7293892C4BC64
-:10911000E58FDE9C99D6FEBFFD68057EDFD65879C7
-:10912000789E8D9F4319E2951B8BE73CE0A7E3BD3A
-:10913000EA67FC9AA95FF11C6ABFAF723A39F0E6A0
-:10914000C451605F3664C8A356748AA7114C3E812F
-:109150003F62FD78635476C8DE0F8387F2DCB30C80
-:10916000AFA58C3E9B7E3C310BFA7DFECDA53AF837
-:10917000FBFE945B8CFB86534F7B4DB05F4EE590BE
-:109180006ACCB77C7AE68BB03FFC43E3C11CD526A2
-:10919000174FFDE895191EDADFA9275F99A1227301
-:1091A000251D76ECBA73AFCE003BC19A434AEAE87C
-:1091B000B356D708F45BEB63EB107972DBF3B4566C
-:1091C000785E19CCC6F679A3E43BA1ACF85E1DF736
-:1091D000EE345C378B2BF0380E5D5F5308E95AA7ED
-:1091E0001B1088175ADE7110CF7AD38BF4F75121F8
-:1091F0002929BC10FC820AB6EB594D92904FA1A5CB
-:10920000EA803D89FFE52401BE09BEA6EF475AE387
-:10921000F7C1DDE9E7F90F3C8F70E39BB74F04F826
-:1092200008B9AECE2518CFE8F99A2F09F6E83DAA7D
-:10923000F19DE560075EA7E23C6819CF1BB9F1B369
-:109240003C58E488E3E5F0F884C06B263AD9DA4864
-:1092500062C514DE3F6BF4C560FC7D8D3A967FD20B
-:1092600018C5F2DE46039F4F3796E0B3AB3186DF79
-:10927000F73496E353E4F5E1D65E417B3A5E017A3A
-:10928000E81AE687D30DD9847C852C95F8E0BE26B4
-:10929000FDE8BF55C17E1BE44A560EF2BD04ED73D6
-:1092A000799EDFC8FC39ED15469F7C15F2B4C943A1
-:1092B000249047D62CE66708437FB47DEE1242DE49
-:1092C000B6C9F573F49FB74BF8FAE87CB24CE77770
-:1092D00077FD884A1790D3BF1D958B58EEEB373D2D
-:1092E000FC86FB047FF9DB36FADE3E9DAE9AD2D1D6
-:1092F0007689C9B13BF9F73BA6CFC8BA01CAB366B4
-:1093000064815CDF3E8B183A85E35D866C79B2FA46
-:10931000EAEF683C98376F3CD74120A7EAF59D5BA0
-:109320006CFB9831165911B7D1CB5D756AE52EB437
-:109330003312F98B2763BE31F76BEF9E678EC17EC8
-:10934000B13C21F0E23C8BEB159033979D657AA8F8
-:1093500057FF7CCCDE0BBDA771FC6F9BBD4989001C
-:109360009F803C057959962073E83C4397B2F8F703
-:10937000AC775304F2FBB4187D0FF6A8C6F24D0A81
-:10938000A24909CA3FF2C7670620EF3DE7FED42E87
-:109390008AEF0FBBBC06C41BBB9EFB0BE6672853C2
-:1093A000341FF077C1BE6398B7A4C8DD1AEC789774
-:1093B0000526CF57C19E8589607C802A6A8A6725E9
-:1093C0008FAF8F3CD5322F04E7BE1227ECF5B707DD
-:1093D00012B7B21D33317D51CA0F7ED1FE82168085
-:1093E000C7560F2B2F0B4C6AB1B04CEB67B37233DF
-:1093F0006DBF35BB332A6743D2D4C4968397425995
-:10940000D49FD862CD26E41AAE0F48285108FCDE5E
-:109410005BD669396C2BABAC4C7CEC29D6BBEEC06F
-:109420005F5E1C4DE150B34FEAC410DFBE9D12AC2D
-:10943000BB60EF4E94AF054982FBFE82A49484A3E7
-:109440009D7B1A0FEACDC2B926F04245C3A428BBC2
-:109450005F484B7A62B0BD9CC4EF0F1174F17490F9
-:10946000E9C74949DADE1E9776DD273289DF57835F
-:10947000200579B98D9D0776D37929EFAF81585BA7
-:10948000E03C2E79CCA3637C9CFBD94F0ABB89FBC3
-:10949000736EE10E3CCF262B7001C8BF952AFA816E
-:1094A000D7162637521B8AAC7DB630462D56D2E2EF
-:1094B00067F4B236BB336F2AC5674BB6B3DCC4F36F
-:1094C000E7A3D956369CD7ADD97BF738C8EFA92189
-:1094D0001DD77F13E6FB328B879FD83F2BEB125AA9
-:1094E0005EF7328B63ACEB7A4503FABE27C0F38E8E
-:1094F000BA2EBA12D657B34D267221E34B73229D72
-:10950000AED971019CAC7B7EEB5BF3FD630979A462
-:10951000C8D4E58B08E90E9E68F151FC3FA2E9939F
-:10952000803EBA833D2D405F6B67C99C9E7A5E305A
-:10953000559EFF5800E35CDE027196DDCB2AAF0436
-:10954000732B4F66FC4B0912E3DA4A76B30FECF942
-:109550003FB6C8683F838B7403857BB14A0EAAF47B
-:10956000B95DA3F8043E6B55511ED2F76D1EC44B76
-:1095700007DE3342DAD83D2DE3F77957829D5D5CF3
-:1095800067AE467B5B2F453FC038D2FB837912E73D
-:1095900011267F27EAA442A5F566050B117FC55564
-:1095A000D7AE85764A784900F83D4F495AD8FF77BB
-:1095B000991CDE2E273B7D2097234588DFED114641
-:1095C00017D63DA54817BBE53917805DD422ADDC21
-:1095D000F20BC06B76119E7B85F7EB61FD1C9F4DF6
-:1095E0007ACC07F8DBCDF1A9EC942DC8D714EFB7EE
-:1095F0004A37AC06B89ED8523FDF47E19AE735DBE1
-:1096000046503C1CDF52DF129D857828F2D1EFC70F
-:1096100003F52D3E8A97DD1BCD02DD569EF8099598
-:10962000EA48B4F52DE66CF09FDCB7069410FDFE19
-:1096300002F83F1EC9117CCFBE1717F5CA1113ECF3
-:10964000D226AB4FAEF8A85E28B6D59F47E5C20F2D
-:109650001E5210AFFF4EC7033941D76101DDF74CF1
-:1096600052D12E08D0B904683930B908F36DE9BA7F
-:109670004900EC86C92AEA7911C7D126C96837435F
-:109680007DA087407E11E6CF51791D87733E4A94B5
-:10969000C5751465874979980479FEBEA42FC2FB6D
-:1096A00048FC25B6BC0290BFAE3C04C5551EEFED8C
-:1096B000CE97A97ECD3DBA481A47F1F25E80EF8B76
-:1096C00072E93E96BE7F3FC0FC40B7C7AD2F43BE98
-:1096D0000C31BAF3593C2A3E159EA3AE2B1E359091
-:1096E000FFA5FF7E3586F6CBBD63D4B4F960FF1AC3
-:1096F00064FE41EFD862BC57A38150FE07BE08F15B
-:10970000FBF2B8FCF0707BC17D4E40C8134F365B56
-:10971000637DFBDC5139A1BE73704AC8F4813CD82B
-:10972000AF4FCD027B743C9753CDA9595F05BB4524
-:10973000E5F260879F9DCBEDC9269DBB08D8BF3160
-:1097400062CF4B10F2605BA30F9F0F5F3601E39770
-:109750000F5F963707E215072E7E1FF7BF6776303B
-:10976000FE3D73E805B84B899CB1A8B6311859A1E4
-:109770005F3E752FDE17F27D357E17E6CB43BE0EBA
-:109780009DD25DD9CE3CCC47395CCE0578DE808752
-:109790007D17F778A867BF847EE06D7C3DBEC43C32
-:1097A000DC57821B0FCE1DFB4907DEC724E0E0BE5D
-:1097B000BF433D3B85F9EB036C5F2AF297DC794AA6
-:1097C000623EFB8219EE3376E143F835041E44FB1A
-:1097D0007AC91CA50F4037B5671592B4E585F49D8D
-:1097E000DBD0F0FD6938EF9205F7AF243A2E29045B
-:1097F0003E48A29DE80F353BEE712551B5C77EBEB0
-:1098000024E83AEFE2E617B83F18F4B4660C7CAEF1
-:10981000E57DBACD1579B998A7AE9207C0AE3D15D2
-:109820007C6B06F8E36AA998005739512D3C4F7AB2
-:109830009AEF4BD47DB7E2791E313FE18F13E59A61
-:10984000BD8BD04F57BB3B84E7796A924C0EAEF389
-:109850005907BDB23DEFD64C41BEAD672FEB6F3C13
-:10986000E080D2C7877A753EAC3FD870FE4C38672F
-:109870009227D79D370EE0A3323CC07EF9C9109ED7
-:10988000D355BDB6FB53DFE2FBE365DC1E09124B8B
-:1098900006782A8158376167164D95DA474AAFDC5A
-:1098A0009BDC02FCB0DD656F6D0FB0726B70724BAC
-:1098B0007329EA67948BCB023F437BA8C52FCACF9D
-:1098C000A29CDCAEB1FB3AACA7BD06E83DDA1ECFE8
-:1098D000A75BCB4A507F2845A400E0360F1C2D2003
-:1098E000FF9EF6EE023FC38FFC896B0236B89D0ADD
-:1098F0001F1907FBCA34FD598EFEC60DAF3F3A7ED5
-:1099000017E0417C9F17B91FFBA7EDD0DF41C61CB4
-:109910007A8BDABA24EF692F9E33DCE171DADBE26D
-:10992000F920E7CB36D7BD1DBE44B3099B73C19F59
-:10993000EE7B9605BFAA672739F2A4C607593C5BA0
-:10994000554D7055D2EFA5EC7B80D1411BCFC7C9D7
-:109950003C4E4E86719C71BBFEE3CCE07282F07D82
-:10996000ACAAF7DECB3940FEAB3BBEE8966FBD4FED
-:109970002EDFF2393DC7A5C4B3415A5E93EC5C10AB
-:1099800060FC3905F87335A7D3923D773F076AFD30
-:10999000319FF967D837ACF2991704A70F9F7FBAA8
-:1099A00083623DFDE417B3CBAA999D5BDF3EED4A90
-:1099B00028D7DF51A45B69E245E2597D36E8905F24
-:1099C000F7707F51B56AA11CAB3E1BC1EF9FDF78DA
-:1099D0007EC779B6FEE385F0BB18EF16977C3E7024
-:1099E000F14BDBCB291DD73FE191BDB671EA9FE07A
-:1099F000E780FC545E3BF9DD047E570B496F9E22E5
-:109A0000C887BB3451565AC12E7AC42E1FCAC16EA4
-:109A1000EB6B0FF716DE15E0F5AD60FAFA4157FD76
-:109A200022D17F2ED677CF47C81F28839DA67EE2FE
-:109A300015F343F975B7ECEA2F478C3F06FB13F695
-:109A4000FAB703E35F843B25EECA4E568C66FE1DD3
-:109A500003EC80EFABB180FD3EAC6F737AAD3E7B23
-:109A6000BE03DF7D709FE078FFFBC6A8235FFFE6A3
-:109A7000443D9ED3F87680D16535B5E8B1DD8ED111
-:109A80008E3CFD7FCCE3D3CEE3920CF3B8EC6F3C7D
-:109A90008F42077FF6CDA3D8F1FED3CE631FF70B1D
-:109AA0003FC79FF375762FC07C4342BFF57C5AD7E2
-:109AB0004F69FDCBF4E9A3CFF92AB14278CF6D927B
-:109AC000DD6346CBE00FF8EA27B7BD7B39DE0B6DCF
-:109AD000623E8E57E4E3F0731E9BC70C7C5F91FBE4
-:109AE000EF3BB8BF0733DCD3DA1862FBEEBB2FBC09
-:109AF0008A60FE7A28817182FDF90BA260A77FE758
-:109B0000C21A7C36E7CF88823C6A0A7FDD916F4EAD
-:109B1000F70869CFC1FE91F74BCE7E59B69F47D962
-:109B20000CE751D2D41771B1CDBE3ACC03FFA2D607
-:109B3000FBE017B4DE4BC38CDE36FB1218176C8DBE
-:109B40007E31F37F26C4C6B9FBC2CB089BEF6529E3
-:109B500016F7D10CFB7960F1DC1F9E118575366517
-:109B60002F88023D3767CF70AC47C9B09E5561065C
-:109B7000A7CDFA17BB9EC39F793D0BD2E6C1AAB908
-:109B8000E9EF176B17788A2690CEBEA8759DFA1B51
-:109B9000AF6B14C7577588F90D361B8C8F824AFC42
-:109BA0005785D2E07C38D8DF1D21C5863C943CBC6B
-:109BB000DF727865E2DF659EE44898D79146B67F0C
-:109BC0007E9DDF27F5DBEAA630FAB55DE36C1EB3B8
-:109BD0002B3C909FE37F563BCFA70F26375A422C52
-:109BE0005EF3B584B3DDD2AA60DAFB4D28FCEE2A21
-:109BF0002CEC83673FFC7FCE70CB448FC3855B6BBF
-:109C00007478701B8C0FAAE1929BE983C34DD05BE3
-:109C1000A67EFE7FA1B307870E2FA4AFBF15BCFEA3
-:109C20005EE9EB1980D710F8F21FF03AC7F5E6D0DD
-:109C3000E025E4D81E8DDDBBE8EEE74498DDAF34C7
-:109C400051AA3B7C05C417BEA2A0BFF7F08E79EBEA
-:109C5000886CAFC7F4D9E1CAB9EB30DF351EC47BDD
-:109C60003C5F9363FF5E067187C5AC5DBF7972F898
-:109C7000BC14CEE67E4B6324F8115E8B5F3DE0FAA8
-:109C800048A56D5D989769BB8F4AE90FDFC3C4B8DB
-:109C9000A30CFC4D0BD3CF43E033D3B8C3C5E76B64
-:109CA000F1EF0F0B9F83ADF7D970D190E485D837D2
-:109CB000E492DEBF977101C0738FCCF2398EC2ABD4
-:109CC0007CB89F8C60A5A555A376029ECA223CEF66
-:109CD0004933D6819FCC7BF5C2AD618AB7D7AEC977
-:109CE00096BC367879230CCF3396A7B70B73233CF9
-:109CF0002FB7B7BD44E03E44773D85D7BB6639BB3F
-:109D0000978AA8E6D8C5B67375535CDFDDEDC74604
-:109D100022F8FD351E6F777FCFE2ED972E19B83D03
-:109D2000A963F7B950BA1B9BEE7E41C11F9DE14468
-:109D300034429FAF4B8907BF01743429C4E21E2A05
-:109D4000298478BDE8275725298DC2FD5D8F3116FE
-:109D5000FCB469FA291CA89F4C7015EB11E3002B89
-:109D6000C2BD2C74FF88FBC5329390D9B04FF4C6A6
-:109D70006E65870D191DE4F0FC999975C1E446B034
-:109D8000F354BA4EDB7CBBFE6BEEFF80EF5D876564
-:109D90007D53617F380C261F1670BAC955129BFC83
-:109DA000E01F5B21A5BDDFECF208FB3B251F847B98
-:109DB000E3EA38CE84FB121EB8E7E05A9EDF44483F
-:109DC00062ACFDEF8C7DC0E58ABB5DAEC2E2D1E442
-:109DD0000DC6CF7B76AD199B8E7F5EE57CFA41B8D0
-:109DE000C4919FB4247EAB07F873C9C2451E2304F7
-:109DF000DF99BCBC86CF638F96187B51A80F4E1994
-:109E0000E510874FD7914413DCEFB0A241C238521E
-:109E1000E90646772B36EC97D7D1E74ECE7F8B00FD
-:109E200007B6FE6EE578DDB32B300EE6BFA7D74F41
-:109E3000473BA6F3B8FE7E827EAFD591AB3683DF7B
-:109E4000AB5B22FCEF32FCA412F20DBA799E480BF8
-:109E5000FDBE11E63B6F24F2F7840D1FD4837CEE28
-:109E6000D2089E97FB8F762FFE7D0B412FBD72622D
-:109E7000C3478D907477AF969A0C7433B2A9EE1BDA
-:109E8000E9FCE416E7FB0F43F1AC7476AE780A798F
-:109E90002EEA2D560D4FBAFA57573AE59898F7081B
-:109EA0006FEA54BAFB1A7AE93039B0DEFB3597E332
-:109EB00002EFBDF83E927E5FB423C2E2777B9273DD
-:109EC000D6A2DEB2BC06C843311F01AF5C8BC1E92C
-:109ED000DA258A43DEAE5818749D476270FDAAD712
-:109EE0007808D671EFAE9726E3DF5174E987809248
-:109EF000D0E0FBCD24E50139715C31F0F97AA3F3B0
-:109F00005EE6D749E28EE9A03F1B94B47CF50CA72E
-:109F10009FD7AB565D83F36F567498FFB1E523AEC0
-:109F20002A07F952E5C17B828F35DF16BEC9B67E9E
-:109F3000A1EFDCF3FA6DF5AA01F5D6D22A27DEF6F9
-:109F400068CC2EB0AE647CB89ACA9BD9485FDD77E6
-:109F5000CCA4E31F4EE65CB4855527F0F71CAFE6B2
-:109F6000BF1F971377CEA4F2E684CCFC61D63F31B5
-:109F7000B9B1E4BE780BC4794F344CFB6937ADF707
-:109F8000325FDF5B0D03EB47373D4DB8CF793FE5DF
-:109F90008C234483F689FAF4FAE0FAEC2093AF6A52
-:109FA0006C1CC897EB36A4AFB709922B69BD137F21
-:109FB00055AAD3E56D7EA2333E59114FDFFE133D06
-:109FC000CCBE835E4A03E7BD59412EE7F47120A75A
-:109FD0005764986F575604EBBDD372FB7510EF3B77
-:109FE0002E3BE5F30FB278FC3C8BC9E713BB9679A7
-:109FF00046029E5A251DE8E1EDECD824A0B795CD88
-:10A00000C7D08FF02D5EFFBA50FC43D04F4B8E2C43
-:10A010009E3F92E2A56B3989494666F9FF31E79F79
-:10A020005C85DD6340F5DFBBA0FF68D377D1FE50D0
-:10A03000CD715F9BCCAE6C84BCC213B2B506F3503D
-:10A04000760558DE11894DB7DF2F13E0F338B17B69
-:10A0500078F8BE261E1CD08E3F4C3A6A70DCDD417B
-:10A060001DE28F872B95D4E57492EFED0EE23DAFA4
-:10A070006EBEC834FE70EDC013BB8767070EB6EE28
-:10A080005856E190ECC03395F7DE59067CA4754C28
-:10A0900049277F859C7E8DFBADDCF4239EB3393E42
-:10A0A0008E27079ED7CDF73BE7735D9D733E825F9A
-:10A0B0008E279B02901F4E479F6CB74BC9BCE9830C
-:10A0C000E859E6FFCD34CF389FA790134079104F61
-:10A0D0005BCDE5CD5B0DF746EC7870AFFF84CCF738
-:10A0E000070FB1BCADF1F19573461A7DF4795D1699
-:10A0F00093439F375D0A3DE3EEE7EF9D0E859E1B80
-:10A100008C0E855C70B7FF00E2FC23E1EFE3E81AF8
-:10A11000C4653E8818AC4CF40570448694F373CB48
-:10A12000C41807E76E4EEC0AE0FDF6D6166F12FE75
-:10A130006EC7F15D974CB2AF6707C7FF8A25D97824
-:10A140005DCA713976C528CC2F50F0BEAED78FE4EA
-:10A150002C80F2BD876490D0E4BAFA950AACEF8106
-:10A160002C9677BE62C32B680F0E97CE57D439F565
-:10A17000FF277C1DBD7696DA5306F493090EED5940
-:10A180003EB6CF892F9A0FF279D50609E5ED962CC8
-:10A1900003DFAF524D94DBA499E947E2A3F0A02A74
-:10A1A000E4182C02E0F1BFF9DF2953E39AFD7CD2D9
-:10A1B0004DDB6E9F0FF6A19B5F46EB8C8EE15E3010
-:10A1C000785E174A3C9935B24F3EBF2DD5ED1F45FD
-:10A1D000AB5C9EC5ED6DCEA7623D9767B1F5513B77
-:10A1E000ED87F8F799F8FA48CC456F7247CD4F00E4
-:10A1F000FE737C681704BC54EE43DEDCF7033ACBF5
-:10A200009B637C25EC1D77FB6BD584C36E3C94551A
-:10A21000E8C8C771DB21FFD017E9EBFFF96FAC2F5E
-:10A2200064FDD3E98BFF0779B222080080000000AB
-:10A230001F8B080000000000000BDD3D0B7854D59B
-:10A2400099E7CE9DB9994966924932933738930080
-:10A250000625780321449E370991A0A803040C1A0F
-:10A260007044D4282144C54ABFD2CD0D893120DAAB
-:10A27000505DB4D67587885DB6D235586AD1D2762E
-:10A28000B0828FEA365A45DA8D1A1FA5800FA2AD2B
-:10A29000ABDB8FAD7BFEFF9C93B9F76626046DFBAD
-:10A2A000F12D7C7ED733E7FDBFFFFFFCE7B0A22591
-:10A2B00085449D04FF7C49FF3B9C1A20C44FC8F194
-:10A2C000BFCA8DBD6E428E45DA93AF81AF4D5D90B2
-:10A2D000ED2344EF94C9A3B4DD3B473EAD81F2BD0D
-:10A2E0007D36AF44CB2BD65F238769BB4C28F9A1C1
-:10A2F000DF9234287F097FE60EFFDEF0804CA2C596
-:10A30000B179AF867518CAC77A923502F3CDF14498
-:10A31000C60709D9AB109D9411F2F6E6ECC8265A8F
-:10A32000AE7112DD3D8590B9696CBDBE8D9FB77A67
-:10A3300027D3F5F4FCBA8414D2F5DD7DFB8AF0A4B2
-:10A3400038F37B6D844CA3130402369245C86D7CB0
-:10A35000EFAB528906E3133ADFA386F145BFC3ADE5
-:10A360008444CFA5F5E368BFF2583FEBF8CBAEBC11
-:10A37000702CECFBF09533C75E3329D62F111C9659
-:10A3800049E17F5E0AF3B6C92AC075D73D498D3DC4
-:10A3900071E0A673B85AE7873F76BA8F25FCFF971E
-:10A3A0006EACBCC34341B22965CEEC709CF90F93EF
-:10A3B000F0DDD3E87CFA46369F759EC57C9EC3F5DA
-:10A3C000D72E05F87FA6CB5E99C263A0414EAD8023
-:10A3D0007EF50E753C1D7F40BFD5739D619DBF4FBF
-:10A3E000009FDF375EEB898B07FEBDA2DE4C076F57
-:10A3F00093C197A7C33C3BE3AFEF16581FC5DF31AE
-:10A40000257CCF85747DC72F96559DAEE7B88DF618
-:10A41000037A7990F60B0CEF773DEFF7F6C691E9EA
-:10A420007249AD793D4B8F249BE9D2461A7BE3EC10
-:10A4300067685D6748F72B2CFCB74B191CE3A5FD3B
-:10A44000DFDE71EACDDB613F3B9211DED67132D3A4
-:10A4500065C6A7C02700AF2D499C4FBA9B9FA6FD9C
-:10A46000DEBE344FDD4486F30721DD97CDA0F5FD38
-:10A470003DB6D22DB46A574F4A6324CE7A27A7330C
-:10A480003AF0C97AF279B43D7983E103C80DF866F0
-:10A4900029A7376FCF0F5B882DD6EF0DA0832442FD
-:10A4A0007EDBEAC4EF36AF13C7A95BB84809D079A1
-:10A4B000AEB3130DE0877FE8B8DEF30A766CA153E4
-:10A4C000BD6E63657D15E53F69F87A1EE674B92BAC
-:10A4D000B27844F8D637C82678D62D34C3D74A9FE9
-:10A4E0004723B6DA78FB17F49C68BE2B1D113FE0BA
-:10A4F000E908DFEF61BEDFDF37B67BA0BD759E5D8B
-:10A50000919E11F9E0AA46335D9C6E9F6F7A830895
-:10A510008FE56173BF2BEACDFB5D4A5A66134A2A69
-:10A52000CB88EA806F1D6929799A82F2E8034B7023
-:10A530003DAF13520B729E9CBAB56451496CFC1727
-:10A54000393D7F5677EBA5202EDF505A4ABC71D695
-:10A55000F33A8793C0F7EB09E019E572F70DC033C2
-:10A56000D0EB32392E9EFF8BCFFB46C3C87CB4ACF8
-:10A570006E643C9FF07A113E6F34B427C33E8F89DE
-:10A58000791F64F3825E33E2E3C457D45B56FE1D49
-:10A5900020FA4D48C791642FE8111F9087418F74AE
-:10A5A000A4DB981C2F1E598F88EF6F855CB5B4AF64
-:10A5B000B36B0E233ECABD01849B28D72D34AFF365
-:10A5C000BD54060FCA7163431E83DCE0FA55E8BB35
-:10A5D0007B7F70FE5BA03FC7A7333CD4853E7100F4
-:10A5E0003CA87CBDC303FB7AD5E605F95A7E4473CB
-:10A5F00018E137278DB53FBE7364F8CD4963EB3C56
-:10A600009D9CB5EEF7ED6FDF3905C67DFBDB9F3B0B
-:10A610008CE32FFB229F443363E5ABEB252D1287A0
-:10A62000CF36789551C17D83058E577F3116C7F798
-:10A63000C9A4A537CEBEECE94E6CBF3454E9F05343
-:10A64000785EBB5152253A84239DC9DD6B85BCB32E
-:10A6500007C62EA270F7B7B7DC168A33CE6C0EEFA2
-:10A660003FBB4369F1F84C7C853E17ED96D9C38E0C
-:10A6700078EDAD7A7580F3B9B55DE80CE971C80E77
-:10A68000B2B41FED3AE6A6313ACC4C8A7E04F28889
-:10A690004C32DB61A79DD7D2DE3AEF651CEE89E62E
-:10A6A0001776AD757C9DC33F1CA2F413B7DE83F50E
-:10A6B000AF12A65FF5480AEAC3633BAFBD07CCB74C
-:10A6C000EB17DC7608D4E4CBA9416CD7107AA50649
-:10A6D000D9EDD4BD9301EF9FD5DE7B4F195DDA71C3
-:10A6E00025DCEEA11D8E6F92D06EB1CEF32AD72756
-:10A6F000AF813C3D17C623CC5E9D4747CBA56097F5
-:10A70000B5352054C8B79202463BD5B7E1F356326F
-:10A7100019EC87D0260FFD7DC2C64FD6835E262456
-:10A7200082FDDF75A83722BC09B373FB7BDC3BB627
-:10A73000D076AF825C80F1893A3654629013762FDE
-:10A7400096478B9FDF26C0CF99CA29B1CF44F350DB
-:10A75000C8E3FA1657B9BBA434B07702D7C17E0656
-:10A7600017B8BC3D14858B15ED1280CFABAFD86CFC
-:10A770006D411C16ED15611F072F0BDE755E19C8A4
-:10A780001F87E6A24B5904CECB85948EAADC3A8C67
-:10A7900057F6DB858F017EEEAD4F0AC830DE9CC0D8
-:10A7A0009B322D2FBE3829007E47795FE1011F1DA6
-:10A7B0007FE942C94B68FF790BC6FB07E8FE5236BA
-:10A7C000D071F26079C76AABC711F243986C066129
-:10A7D0000BA6B0582CF1B2EEDB3C8FB63FCFBFD703
-:10A7E000E6A6A09EF85DDF66271DF78EB6508E3771
-:10A7F0009DDA13E91F743967139295A5F5CD5509B4
-:10A8000071677C540BE5BD0F8AF13EEED20A08F960
-:10A81000992D1C9468FDD48CA405760A2F5F91981D
-:10A820003F6FB3368BEEE7E21B1F5D4FC75FFEDD68
-:10A83000490BECB0EE06317FE90258DFD259A25C39
-:10A84000EE82B22F85F787F55650F955185BBF3D5C
-:10A8500087CE9F21DACF58308FF63D5CD9526DA755
-:10A86000F3FFE8BBDAE649130999BEB0D2ABD1F2E7
-:10A870001319F50B52287EF6124AA7B4FC64C6954C
-:10A880000B60FD3ED9C6C7BF6A33ACBFBC413F0FAA
-:10A89000EA257DE5E65ABAEFB5CE814340AEEB3608
-:10A8A000E8CE2CFA3F2912E363A7A345CBA7B073E8
-:10A8B000ECAB8CE6E372BA19BD16444B408F0D9594
-:10A8C0008B69B9C450CE61E5BD9BC8D5F1E4ED6D8F
-:10A8D000994CEEED4D8E5FAF64307B80C20DF54933
-:10A8E000DA11A2ED8EA3573E4A77E37C079389EEF7
-:10A8F000CC88F1DBE594872B285F12275BA71867CC
-:10A9000098FEC8607287E89767803C5D0843D0ADC9
-:10A9100017A912FABBA42525321E688744ED4B40C7
-:10A920007FC8365CAF5F96AE5E44C7CB4A26E13D3A
-:10A93000F4EBCF2458A6FDB53DEED8782F71BAAF11
-:10A94000290AED84F16AB2734BDB83B171E8BA3B3B
-:10A950009C534CEBB6576440FDE2D29B2719E0397B
-:10A9600089ED83D201F6A3D33C3697F2C1DEBEF364
-:10A970000AC17EFFA945EE96F72D7610DAEECA4C95
-:10A980002E5F02ACBFBF9AC99FC19B53223DC09F9F
-:10A990004EB53464B03B031C1ED5772EBC1FDA3590
-:10A9A000F53948126DB77E4F653619412F367D3126
-:10A9B0009344A61ACAF6A80272A7E98B39F87BF568
-:10A9C0009D2F29C0A7304E80EE6BBD4BCB56016E3C
-:10A9D000EDF1F14F1D725C47D317E9449F6AFC9D6E
-:10A9E000C12936BE0FEB4FB7AFD8783289648E34A9
-:10A9F0009E82F54370B773B82BF1D7395FD02985A4
-:10AA0000B7CD405F4B39BD51E9877194FECB26F538
-:10AA100080BC8FCDBB09C7DF6BA778043BB02F3953
-:10AA2000007671B99DC9CFF2BE0CAF2EC5E843D0F8
-:10AA300085C0EBDE8C964ADCEF22C9DB131CBEAE70
-:10AA4000CBC4BAB83ECD6E08CBD718D627F8818EC6
-:10AA5000BF978F5F5681FCF32F4CFF50BE5901FC0E
-:10AA60000B760BEC438D962CF60C5FFFCFA8EC8099
-:10AA70002FC52383FFA5EE08E80101B7E1F0CF3F22
-:10AA80000D3EC7627D79DF330AECB32901DF8632E0
-:10AA900053B15FF691682AF8B5BF4C677A6D6FEFD6
-:10AAA00054D74CE08B853602220CF60DF66AB9902D
-:10AAB000B764D70B5576FAFB5099CADB00E06148C2
-:10AAC000FE469DCE58FBAACC5D0B3A689D2F89E2CD
-:10AAD0007F12DAA14E62F027BE9DC1E4584598C4AA
-:10AAE000B55B966532BB45C0FB7B1BAAC97B747FF7
-:10AAF000CFA533BEAC18D025C08BE06BAB9C7A8859
-:10AB0000E3F17BFCFB8F9753D269E4D4222EA7D8C4
-:10AB1000EF07A9990FEDB2B2A22512D589AB5E98C5
-:10AB20003A1EFC995B72E4C0FB94AF9648EA981F0A
-:10AB3000D171EB9C018C93093AA923CE801BE04E86
-:10AB40008DA62F41EF2F746119FE805DF269B7C4A5
-:10AB5000E89004D2EA4A12CB21B18E5B72149C6F4A
-:10AB6000D5E6F16961E3FAB89EB83C29FA2352347C
-:10AB70009CCF4599AE7FAD4D36D4BB993EFBD0A35B
-:10AB8000FD3483E2E15589D4E37A2CF6D26F78DC88
-:10AB9000C66A2FD5733BD20FE625F2B10D9DD3ECDB
-:10ABA000AEA408615D74F053B37B09E7D7A8ADC9C3
-:10ABB0004007BFCE286076ED15B4F202CA94CE6A83
-:10ABC000ED7D831C7B1ED6837A213A0DF8F4A50C0B
-:10ABD00062B2F31AE4508104766B76920A7286E2CE
-:10ABE00009E170D045EC2E3AEF73F40B78AB916F1E
-:10ABF0003EE0F0011D486A3B427F07F75B4914F4D1
-:10AC0000CDE57353D06E25A76E1D07F10A7F0AA309
-:10AC10005B3A8E938FE3443AE172EF376327F68015
-:10AC20007E12F253E0819C92713C517F505A54E065
-:10AC3000A5E583FE734BDB25B3FD03F650CC7E5AAE
-:10AC4000BF793EB597A6D7F6466D5E902AB72FB866
-:10AC50009DB6AFA1F6938BEEE78F194C0F1E0CEA51
-:10AC6000722A8C379EEE83FE7428393CA9C51DC319
-:10AC700007B571C280BF2C857EDD8C3FE0DB99C9B2
-:10AC80009091E163DF06FECD4A65ED87E93D5EAF59
-:10AC9000490CDE5B2A999CB0B6B3F171D73AF5DA6C
-:10ACA000AC42A37D1522408776C2EC2C19748F1F0D
-:10ACB000F519C2ABFACE8634D09B9FF52D4D239368
-:10ACC0006272D4E1FCEDD8F7A91C899225DF017EE0
-:10ACD000555E9709D8CB7738185D2AE9616F06FD74
-:10ACE00066A6C4F79B27F2F564825F4DDBDDC3FDEA
-:10ACF0001EC717E7A3BF9D9FC9E245A9397528D78D
-:10AD00000196018AF73432A87B0D784CABB099FCE0
-:10AD100007C71793B1FF99DB0FA509EC873293FDA5
-:10AD200020E6B5DA116FB6E6E0FA45FF1539AFD582
-:10AD30001043FB9564E00E186FE5FA7C53BC289134
-:10AD4000FD3137531AB217F4B8EB524CBFBF49FD6F
-:10AD500045DD38FF31367F6CDE14CA70B179E54CC1
-:10AD60004DCB44BF6F96F7E8F9F4E3A2BFCBA877C9
-:10AD700050FE53FDA4ED70A35EAA05B92DFC24E09E
-:10AD80007F6F1AF077656DA6DFA027793FAB3C3A5D
-:10AD9000C0FDEA035CDFA41D117663724092627A03
-:10ADA00067B8DEE276B1453E9ECECEA674AB1BED13
-:10ADB000806178CEFCAAF6655102FA98F00FB12FA7
-:10ADC000CB6785E512909FB512194F3FD3E799F5F0
-:10ADD000BD9EC9FC109D329CD16F59DC606ED701BD
-:10ADE000EDFCF04D1995DF62D447920C728F8DD730
-:10ADF000CCE92178E2552540E57094DB43BB7CDA51
-:10AE00005D40171DC9A993414F74248F8D405C622A
-:10AE1000C7FF5617EFA0EB1F7CD9A1F6C0B0FB18F7
-:10AE20009D542E5FDF6EA7BF3B7A256F1289ADD38D
-:10AE3000BD41D256533EBE9FCB89261FDB4F932F79
-:10AE4000AA8CA3F3E735B17514F41E90EC0679577C
-:10AE5000D0C8DAEDC87498F4CFA350A6E33C22FC26
-:10AE6000111269AB2983F69A1DCE41F27A258C0F17
-:10AE7000E7B55040507AC853D9F86E35225D3B296A
-:10AE8000B6DF2EDBA249A027BAB25254D013277DD9
-:10AE9000E1C760BF4DFDD128806B7A7F9F1DEC3DDF
-:10AEA000975FDB0DBF8B7D06646F1EC8D9947EB69D
-:10AEB000BE6E0BDD1372175F570F93BF32799E0082
-:10AEC0005E4086D0F9B23615A39E12EDB332B8DEDD
-:10AED000C822E127D0CE225D04F146701F599B267F
-:10AEE000A0BD2FF01AB3AB264E01BBAA686BD4BE2F
-:10AEF0008AF67BFAA1F8F1FA17399FD07D1C34EE5F
-:10AF000023117F08BD26DA3912F8D582EE536AE3A1
-:10AF1000DBAB5413607DE572DF95B0EFA60E8524A0
-:10AF20004931F8BBFCA12320B7F27A7748001B2BEC
-:10AF30009D7564FC50CAA7FBBCF546E29549E275D5
-:10AF4000376D90B5D5467EEE5018DD28E6F33DE12D
-:10AF5000677CC2E305B3FDA163008FE67DDB14C00F
-:10AF6000F38D3BDF51463AD7192DDCA446E6BF34BA
-:10AF7000D53B23B0DFCAE576C4E39A0E2502F2A9D9
-:10AF800069F79EA80DECEC8D4405FE6FEADD732891
-:10AF90008FC227BF499B260762E3E5374524584FF8
-:10AFA0001625C63EF4FFA20AE86D2B7D839D0CF6A4
-:10AFB000CA2117E3FF0F2BDDBA44E1F8A123DC041B
-:10AFC000ED3ECC4D51F5600CEECFED99FFBC4459F0
-:10AFD000DCF3445214BE5DB69E1C276DD7759EA24D
-:10AFE000023DB9FC618F8FC229C31EDA0BFDD37DF0
-:10AFF0001EB58DF60D249129A8AF470987E916BA29
-:10B0000098BE91F1CB5C5FAAB003A7805C3AD7E70A
-:10B01000117614CAAB430EB68F0EC2D6DB99A915B2
-:10B02000C07A883703E7CD6B8A4AE00758E78DD1AD
-:10B03000955688ED47BDCE5E05E4FC1A2E6F2A9723
-:10B04000EF94DE33D041A98F9DCFE6EDDE21817FE5
-:10B0500048EBDB6A7CD89E2481BCD9CDCE29D6D0E2
-:10B06000FAEB0CF245EC238E9CA980F5B9FBFB9E14
-:10B070006572268AF427D66BC5E73C1FB3EF2EA274
-:10B080006602FEAEE8C5013ADEA1C2641C4FF0BD07
-:10B09000954FE7F9189DE7D5EF94209EE04B61F6B8
-:10B0A000A4589F68B7CB5755EB4338F4211CD6D62C
-:10B0B000DB116F623D354A681CF865CBF878CF5CD0
-:10B0C000F1963240CBF7FDF415A4C7B5DD9286FEAC
-:10B0D00042F72BCA5288DBE9FF2E439CF61266A288
-:10B0E00090ED3F7905F5CA257B59FC60EDDE3DF614
-:10B0F0006BDD313A0D9E786625D0D9DADE24E292F6
-:10B10000007F01E4532B9D523983744F7405CFB9EE
-:10B11000A89CD451AE927010FC1421873B397F1348
-:10B1200037FBFD46BE6E316E4C7EBA90DE8327A69D
-:10B130003CE3A4F05CAB4AAA0BF891C39B8E1F457D
-:10B14000394C4821F86B627C2BFCFE99DBED71F0E9
-:10B150007C1BE0D9AA4F849E0D3E5C45E02BF06736
-:10B16000E7701FD2EF3E05D7DBE1B3333D5FC9E2A5
-:10B17000DA1D0EA6473ADA9C11E0EBE7D22F7A5E91
-:10B18000A2F2D293A144E17BD0B6AA09EA0FE6B1BC
-:10B190007574D93615B7303D76870FF1974A987C8C
-:10B1A00062F2E8BE1F3379D2A4BBD17F6C0AD7AD5F
-:10B1B000C673099F4B857309127E5659EA89D1835C
-:10B1C00015BF81270E28015A7F492FE38318DC9889
-:10B1D000BE12744BE51CE2BD33539C5F868300575F
-:10B1E000EAD7B741FC41F8F5A90D21DD1318CEAF20
-:10B1F00099DCAF9FC6FD7A4785F36FEAD7AFD9F0E8
-:10B200006BF4836ECA7901BF825FA8FF68E2AB2747
-:10B2100038BEEFF731BDFA948FD1D59AB25EE4878C
-:10B2200035EFB7201FB96B993C71F79BE52021776B
-:10B2300073FB602B8E5393D27B910C7EF2BF4ADE60
-:10B24000769278DD37482DFF097932640FCFDF38E9
-:10B2500045ADFC720A571787016FF76B1FF3B73EB6
-:10B26000DC4511017C696F5146B2874F372E89BE8C
-:10B270002601BED770587FB8BBFAC23F409C7157B9
-:10B280001AE6B37CB07BC937FF40FB7FB873AE0AC8
-:10B290007ADAD71E42FA19F4BB54882752F1592B97
-:10B2A000517A68EBFD55EA4C382F7BEC8229203728
-:10B2B000DFE57C79E2C7F20680CFA67F7B7C0ED4E7
-:10B2C000AF894899603F7EB8EB5FFF0A7AB171E7BA
-:10B2D0003ACC4B6B7FEC976897DB223BD8EFBBD225
-:10B2E000D0CE3CFEC8B63900F7F6DE76AC3FF1C8EA
-:10B2F0000E2C3FF36F8FFFE22F60778452556877F3
-:10B30000E2C7DBFEE92F40E775A92AECA3296C67A9
-:10B31000E7B982BEAD726BCF01E453412F9780DE57
-:10B320000538D533F923E8F95D7EDEB4AADADD0508
-:10B33000F2ECDD2D9EC6787146C5CFF002B11894AF
-:10B3400063F512C6D9BA28D540BCA32B9954C0378F
-:10B35000655254C9A7F35CD1B0670EDA3DFA3BD70A
-:10B3600043FB25FB5C640BC6E520A84BFD0124755F
-:10B37000424AA8183C4AFD663AFACE2F29DD1EA69D
-:10B38000F201F58EC51F58D2F5C2FF801CAD730EB9
-:10B390001C0051287EEFE2F11BDA1EF54EF9FAF897
-:10B3A00071D254BF9BD32DD39B797B171504504E7C
-:10B3B00024A9E30DF6E998232D5B203D29AFB1EFD9
-:10B3C00022D8C7C5C5D74C45BA80F81FE81FDD8D08
-:10B3D000E3AF85F825E5BF73FC3C2EE225BE19746A
-:10B3E000FE1A3BF1B9E14BC86B0E94238FE2B8D43F
-:10B3F000FE40BB2AF0CB2B1E057B64BB239C3B0D80
-:10B40000C6E9E27A6B275B37EDEF8573543A9E7796
-:10B41000C6141CA7CF9181FD75D67FFECE3629B606
-:10B420005E4AA963416FC178656ED0337A3DE227E9
-:10B43000A0E0BE4E40935CDCF7E4152531FEB5C6B6
-:10B440007D409EC1F9F06C7F65857F5AEC2BE2410F
-:10B4500056786EE4F53FF36BF825BB324D7A2591B3
-:10B46000BDF2CC151F33FDFBB37750DE34031DC393
-:10B47000FCE1F74DFAF75A41C74FBD83747CED3EAE
-:10B48000A67F9BF7952A40B71FB46AE43D6A8036D1
-:10B49000F3F3D7EDD2C0F598EFF294CB0B71BD8FDB
-:10B4A000B9BE59B3F59DA3706E5AB82F17FDFC8F26
-:10B4B0009F72D5C338076D3684E7C19EF377B44BCE
-:10B4C000C67532BF80DAC148AACDD44E6576F0EA9F
-:10B4D0006DE0A7AD6D242AF07FB3857E9AF7BD821B
-:10B4E000F422ECE0E0C38B5733FBD3A5BAC08F9BAB
-:10B4F000C7EC5142ED51689F3E2FD2A6207D959614
-:10B50000037D3D73C52F3A418F37CF235E187FFBF4
-:10B5100018EDA97CDC8F4420CF65BBA3BBCA4EFBD2
-:10B520006FAF0978292429DC76A2DD4B8A15AEE7B6
-:10B5300056A3BDDC9C73958A7C6695074FB5A1DD4B
-:10B54000D51C48C6F55CB24FBA85D9236EC2D62F3A
-:10B55000217D5E12991981F8D9471C7E028E1F3B0E
-:10B56000FA56023C3EFE0925445A7FC93C46AFE9E3
-:10B57000F37A518E3CF7D47CD4E3822E3D4F26A142
-:10B580003ECFB07B2515F5DA9224235EBB1D4C2FF0
-:10B59000A5733D53B495E1B793F353A7DFC6BF8AB4
-:10B5A00039FEE2D52783DEFD88E31FC508C8772E64
-:10B5B0004FD6AE8E223F35ED66E3F992B4D25B0DE5
-:10B5C000F4EBAB667A519C07C0F9C0A238F2E231C5
-:10B5D000BE8EE0C3ABB681BD7C31C53BA894BC62D6
-:10B5E0002E47295D00DCF21A43480717FB6E5021F5
-:10B5F0003FD59F49D05F1C6C5348BCB8CFE35C8EED
-:10B60000FA3343651087F6677BD0CEF1CB953617BA
-:10B61000F42B95D49E009E7BA29D37E8CF557B4CA2
-:10B62000FC1E2AB3D176C7B23C0CCF91DFD8179756
-:10B63000001F06D8B816BB6FB8DFCDECC685DDFAA3
-:10B6400064F043C4B9868043A42DB9DE283F7FC28D
-:10B65000E11099C8E2A9D4BE77635CDB4BE701FF38
-:10B66000BE67E623CCBF6FC7760FFB997D5443F7C7
-:10B6700007769BBF28B49EE9538F1A0F1EB3FDC2F5
-:10B680002E5F590A7E65739D5B057EBBEF67D22AEC
-:10B69000A467081682DF1D5E8D7820140FC00F246A
-:10B6A000CCFCD2E69650243EBD2F42FE6B06FE93A4
-:10B6B00090DE310E4FE93DC2E89DE93FE1FF837C1A
-:10B6C00034E61D0A3920E44BB3323001E858F04328
-:10B6D000F39C810900B7D1CA938F1D94FF817F2805
-:10B6E0001C807F04BF789E667CB2A52D5009F55B57
-:10B6F0006A88B7DDA08FACFE12AC13FC4E21D74F89
-:10B70000FA42C7FD1007B0453B21BF42C8E1E6A79A
-:10B71000374F8897FF26E4B0D3CEE49B339212696B
-:10B7200037D0179CF979A6E017F3795236C48F8F7A
-:10B730009CF2BB791C7F74F91259A0CB41DEF4A4B2
-:10B74000605EBB881759C7FDD82F99E232C26F815E
-:10B750007307689F93C5F827258BF3679688CF46B4
-:10B760004CF41FB085DF813CA344FA4BF4FB5BC56E
-:10B77000AFC43C428F5AF12FCE4D603F8B26256ED1
-:10B78000D77D80C9272B3D4EE47C72147C0FDAEE06
-:10B790003FF839D770FCB2714878A2292FAECBB6EA
-:10B7A000A7315E1C4C9C779087268E2AEFEE402BAB
-:10B7B000CBAFFA0F9E674B564F34E559B9D5401BB6
-:10B7C000C451AB9CC15219E765712CCF1CF209E83A
-:10B7D000E1C9FBBA8B217FC91F329F9764D7279B92
-:10B7E000CE2372C319A6727E639EA9FD989642531A
-:10B7F000FD391BCE33D507F529A67251D70C53FB63
-:10B80000F1DD55A6F2B90F5C6C6A3F31B2D854DE57
-:10B81000D2D65B0F78397FD795A67E5576AFBD948B
-:10B82000C2B5A47795397FCC02CFB4BFCA71E9B055
-:10B83000292B8878ADB29BF3882FD8678607A4CBD5
-:10B84000019C27133EDE9C635346CA6F9D4CEC7FE0
-:10B850001E10FD83C3E9813807D4501C3F53D0B973
-:10B86000285BCFB584FC3853FA4BB44E417F89EA4C
-:10B8700013C1ED3B9CFF055C1C4370A95747828BAD
-:10B88000E3747021142E9EAF0E17EB789B529A3101
-:10B890004FF8352818ECE38156F37D98657A1AD372
-:10B8A00043A125A7B1A3591C389CC4CE2BADF5FFED
-:10B8B000C9E1F2218509E261947CFD16C7437F222C
-:10B8C000BEDEF0C9C16C90DFB504FD666F4BDB27AF
-:10B8D000A0B7AEB64709D0FF7D7C3FDB79BEE80359
-:10B8E000AD5E1CE7417E1EF9506B007F7FB8B51836
-:10B8F000BF9156157FEF69ADC0EF4E6ACFC1F70714
-:10B90000ADB5F8DDD51AC2763F6CADC7EFEED630D7
-:10B910005BD7307C9172B473429971E3A5D7E8F29A
-:10B92000A8F044E482B8FA32E13872C388F9E51B22
-:10B93000FAA5C79F35F0EF5B591EDF51C86D9C4ECD
-:10B94000A6C3F9E6E9FA7FDE4A1E7F76FCE8F948ED
-:10B95000D013399539211E5F87795EE563DB57DDAA
-:10B96000A54F4A0CAF189DC587539DF3E33C70D695
-:10B970002783CD60E82FEE9F88725D382DAEDD9075
-:10B9800097CDF46E7D123B8F5F6EE1EF6F6533FAFA
-:10B99000FD5636D377BF4B2067D2793D5DA703CFE5
-:10B9A0000787F1DD3DB3E3C1F7AEEC80292FC57AFF
-:10B9B0006FC53ACEEF1CDD63D4387C76BA71C4FE15
-:10B9C000ACFDAEE2FBFF663661EBFF7FC69FBFBBFF
-:10B9D000CE83FE03C0CD6FD8FFEFAE4BA98F179774
-:10B9E00069CF66E7A1D43A27C10C34F575056CC55B
-:10B9F000621260E7BEE3BC101F12790189E9D58E9F
-:10BA0000712484A13C1CAE141F01A5888E6F1F9A5F
-:10BA1000276A8779545B4CCF42AE0D31DCFF9087AB
-:10BA2000D303EDAF2B98D7339007EB3B537A22F239
-:10BA300043E3473AA71BD6FF0CE5CC9AECBFAF9C7B
-:10BA4000117C4E4EDD3B3E9E9EAC87B967507BEC31
-:10BA5000FE87989C39CDB8670ABF7A7900CFAF4787
-:10BA60000DBF7DBE51C5A53E77A54E26D4AFDBE008
-:10BA700064DFDB93537BE0FBB96B6C84A4527E8163
-:10BA80007552BED5AB08BBBFF596F09B5AA683BCDA
-:10BA9000DD9E1B7A309B8EB34A61FEE29FB2B4EF0B
-:10BAA0004339999F0B27F37361255BE98432D18A6F
-:10BAB000715F17F07D75DA0263615FEF4BEA44F066
-:10BAC0005BBCB6880ADF54122D61F9799130F86BAE
-:10BAD00099E72707C0DF4D9E40481FC6C75517C4CA
-:10BAE000D19494C117C701FFFFD286F7A21FF7B206
-:10BAF000753EFE403E9EB350818FF26232FC4EB7DF
-:10BB0000B205EC72DAFFFB52F8896CBAAFE35EA7BC
-:10BB10006EA3EB9ABCF9BD8C0CFAFBE3FBABF05CBB
-:10BB200021BA4BD615B8DFD0F7E1772FA1E35DD06E
-:10BB3000E7C0F8F3054446F9BEC64EB6021F25829B
-:10BB4000EF07DF889F07E6C8914CF95DD6FAF7B991
-:10BB50001EF82041BEF16BBC5EE4CF3844FE8C5F22
-:10BB60001B317FC661C99F71D84304CE851D43F93F
-:10BB7000330D04F367E838C6FC990FAAE2AFA39F20
-:10BB8000CB73C7172909C64DC5DF3F281C799F8E87
-:10BB90002F5CA67CEC587F37FE9E287FE73301A7F9
-:10BBA00004F94B9F0CAD2F97E899C67E8CEF62F39A
-:10BBB0001460BDC3920714AB67F93F1DE98C4E0EAC
-:10BBC000E4787DD7D0A1AF2103789FF36AB7CF0186
-:10BBD000F1A41051F7E0FD1EBB637040F06121B489
-:10BBE000B3BF0B76B78D4A5EB0BBAFDEE07877C0EF
-:10BBF00020B71669E63281F60639BC1862D8741F80
-:10BC0000C9E71563FEDFA72490E61D418E3638E5AF
-:10BC100090DDB08FFE0476C4859C0EFB73E3C3AF4A
-:10BC200030C766CA631ADE9FE703F07B68B77A47BE
-:10BC3000969F00DF70A6717C2B1E7C587F3A38FBE4
-:10BC4000E1B00DE26A9512CBF3FF9BC33B9DE7BBCE
-:10BC5000B1FB030E4BBEFAE25CEBBA59BEFAFDE94A
-:10BC6000A19939D82F30C1785F60AF5D4B9942BF41
-:10BC7000FD5CEE58E1B289C3D9BAEFBD3CEF3E5945
-:10BC8000262D7B0CF0B7EEF71B398CCE45FB0E074B
-:10BC90003BCF02C1E7A4726F0561726F454E21CFA1
-:10BCA0001F4FB703BE1AD8106485F7109E2F0938AE
-:10BCB0000F831F87BB158E21125809F9DDA783E773
-:10BCC000865C6D450E9DF79A57921590FF2B9D83CC
-:10BCD00007C1671DE8B31D1E47BFEFB8C71DDD498B
-:10BCE000E03CAEF8C967E837B542657915641EDAFD
-:10BCF0003F929E2F7F79FEE8ED9FCED47031F0C742
-:10BD0000FB3C3F5BE8A5CEBC131320CFFEBD8CCA25
-:10BD100029B97E8CC36B9940473F4F6274F4001D74
-:10BD20008996D7FD6222DE87BF2A37AC423B91E776
-:10BD300047B4C109909770A670A27F1C4047A783A3
-:10BD4000D39A1CC2F831353E9DF4E4B0F8DFE9F82F
-:10BD500003EFA195FDFDF843C0539C6388F5A9B995
-:10BD60008C0EC557C0CD9A4FA4E6DA783B96AF78D3
-:10BD7000556E08E17C72CC27475D74EDFD4AFCF7F7
-:10BD80001D9E1CE5FE05BCFF5E72B83F39FEFA5EE3
-:10BD90004CC0C7FFA8F54DCDE5F43339FEFADE1EE1
-:10BDA00025FC4264F0ADF4BF831EA3789E0A78267A
-:10BDB0001D83281FFB33E2AFF3AFA35E67D8F1F713
-:10BDC000D0B782BE897E4D239EDFE724C73DBF5F8B
-:10BDD00046FD29F087ACE7F8E2BC9ECA0FDC6F9DF8
-:10BDE00073706526E07D1EDF771689A6C3F9E62FFE
-:10BDF00092F03C60989EE4FC41E195920BFA64E17C
-:10BE000020C635FA27C4970B29B98CEE86DA77B1AC
-:10BE10007912DD43C8CC9546750F819485311E5843
-:10BE2000E97447658A875B383E94FC9B54B00F2BBE
-:10BE3000735E3A02FBA4F0FF70089E86FCBE13AD51
-:10BE4000CF7BC73912CBED35F213E52D71F63321D7
-:10BE50002B3C21D7106F5CB3EB05EF3803BE4AC80B
-:10BE6000808DDDA31EB499FCE46C72467EF27E17D1
-:10BE7000E397F73242A80F403F80DEE97CFAC252D6
-:10BE80004026D81990DF33E8494639DA9E37A3387F
-:10BE90006080676DAEB02FE50476E3D7BB1F10B3AB
-:10BEA0009B2493FD1A1BDF8EBF0BFC54BA5F8C8B57
-:10BEB0008F0959DAA500CFBF646897C1D70A3FFD43
-:10BEC000CE59E978FF00E0373736DE10FE13E0F98F
-:10BED0001B595A3DC04DCD0CB0BC0191D73714BF92
-:10BEE000B07B8F3A63F01E2D5E92797C8DDA0DABBC
-:10BEF00061BD4A12E747E2C67BE4C26E2116FB86AB
-:10BF000014337F7745CE4BFF03F19FCE54C6B29DCD
-:10BF1000FFE4423FF06AC9ABC0BEA9FDF1E6F76994
-:10BF2000FB3089BEF92DF40F859D91227F9932FA5D
-:10BF3000750AFFF97479D6CF803D46D7536573E310
-:10BF400079E733747FB9546E5429EC5B399F5215ED
-:10BF50001DAF4A2ED83F40D7F51939953C9B7EBF7F
-:10BF600043181CD6BFF2870CF047ABEC8E1346B9D2
-:10BF7000658D7FDC956B8E7F7C4616FEE67C80CBE4
-:10BF8000AC0C84CBE4A7E6651BE32F43F10FBE8F17
-:10BF900025FA354C9E5AE49C906736277B6F84685F
-:10BFA00024E0CDC2381283BB2EE1FB57B345199C68
-:10BFB000145A9EC59124417FBAEFD9FC4B56857324
-:10BFC00040CE405A0FCC47BDBF1CF8B65FA806E074
-:10BFD0003B570AD9D93A222C0F91B414407B9B735A
-:10BFE0004086F945BC02579205E3887959D9C3CBFD
-:10BFF0001D759FAEBC2E303CAE41DC1EB47F15BE1D
-:10C00000BEE35EB76E33C43B92DCD1E398BFCABFD8
-:10C01000D6B8C7EDB2AE43FE7632E94579E9767F10
-:10C02000A40330BCC42B41F9FB52F8E7C017479575
-:10C030006E12A4BF9FFCF9E704DF65831B6245F025
-:10C0400035EB27BF7B3DE645FB43768B5E0A4BC055
-:10C0500047D9F5D6DFCDFACA49FAF1FE90140DE5BD
-:10C060007C9979FA784EA2388EA38AA17EF0466632
-:10C070000F1F4E66FD0F27B37E6F71BDD49CA110BC
-:10C08000CC8BC9723AC19EFFD8730CAE6C823EE96C
-:10C09000027DE274688857A157D6EEBD9900DE9AFA
-:10C0A000F72D4238FC5E62E7A4FA0A09F319C4BB13
-:10C0B0000FF593C8CBB4279991C7FC94A5CF8757A8
-:10C0C00034D172DD4BA4244ADB95CE0DD5C0FB2EB6
-:10C0D000ED2544DD44CBEDAEF08F7E02FB7885BDCF
-:10C0E00037B68EDFABA59858B39B8EBFE3CA31EA53
-:10C0F00016D852F56027E40B0D6E265EC82F194640
-:10C10000BFA7283F507A7804CA74DDEB5687FFE555
-:10C1100036DA3EF725A2621B5E0F3E0AE04FE2745C
-:10C1200001BFCFA5BFAFE37454B45F62E7FC3EF636
-:10C130000E180E0EEF7439D9FFAEDB5F79F934BA01
-:10C14000AEA2BEA948DEE3687BC883824C04D69EBB
-:10C15000D8E2B51F07ED0370AECFF043F2147C3F79
-:10C160008970F937DDC2873363FC80F5A5BCBC8ECE
-:10C17000EB2913DFC038D46FD7CAD9B13FF6F331FA
-:10C18000FE5089F8C3F8790689FD8171AB63F3A08D
-:10C190005C9EC7EB0E2E5F80F9DFD3EDD103C0EFBD
-:10C1A00033F9B7947F81DF9D148E57D85B0EFAE97F
-:10C1B0007ED23710B50D666908B4C37865242403B0
-:10C1C0009CCBBD9BDB617D1736BC9209F475735E19
-:10C1D00011D2DF2CA75AE4A224D25EA1AADE2278D3
-:10C1E0006F4C42B82CAD774620CF6DE9D07B3FE154
-:10C1F000E032CA3F5784257E0F3F1C6C30C46D452A
-:10C20000FEDFB224EA5FC791DF37E731FD2EFAAFD8
-:10C21000E3F75344FDDA3C37CBCFCCBB68461E9ED8
-:10C22000C7B0BC68CAFFB3F3A6C5E40A9D17F356AE
-:10C230009610CD01FB5AC2F957F0FF52ED56B46784
-:10C240009786CC76E9EF25866F7DB98476E215F581
-:10C2500023DBAD0BF3C4B9708117F500117A8AD1D5
-:10C260009590E78B41BF831CAEA5FADC603737DCC5
-:10C270007E2A1DFB65FF60ED97E7C4EEC3ACB3DC1F
-:10C280008769E6F761D6ED6B736401BDF3FB30EBB4
-:10C29000F6BFD369CC0314701A7E1F6610F31F9784
-:10C2A000299103704F68D94D748FB4FDAFF8FD89A3
-:10C2B00067E1FEC494181D79AE7445597E9D867958
-:10C2C0007E05DE1415F252BA6C5330AFA82BD5A3FD
-:10C2D0001AF378B6B4B5D4403B914F24EEBF2C4B43
-:10C2E000706EFCCD3C663F6F97585E97BEDC89F060
-:10C2F000F6CBE488F19EBFBF2884F97433F202388C
-:10C30000CF761E5F80FCD3A9F41BA1661AC317EB7E
-:10C310006F950F74BC0E18AFBA48C53C9AEA3496B4
-:10C320008FE6CF0C95DE3229366EDD7E96BF57172D
-:10C33000FAE410CBC35D5406F04C24D7ADFA8BD28F
-:10C34000DF3D408FC3F556B819E8CF51155A7E1D11
-:10C350001DF7E4CB0AE6DB918D9AE4A0ED7EFC822A
-:10C3600057857B781D95A14535586FC77B8259F558
-:10C37000249A44EBCB5E527A20CFAF91742B304E8F
-:10C38000A3458FDDE47E56013EBD69A72346970491
-:10C39000F213D52210784DBB87C545500E09F964BC
-:10C3A000A56732CE2C874A85DCA5F281E5F73530CA
-:10C3B000BD477E20417CE8A4E798CCFD6B947BD3FD
-:10C3C00084B0B2C8FB69FB9F437B46C0730E9517D0
-:10C3D000E0C749F0FB64EC87652A4F8B21EF742698
-:10C3E00049467A1B6647F0F5950DAD9FD94D424EF3
-:10C3F00056561002EF2358F143E7433A17E77D7092
-:10C40000B402E70833F9FC9FDBB449D120E08B4448
-:10C410006C14CE9D520BEA1D27E481D2EF16298CB5
-:10C4200072F1A7BA2E035C2F242D4B160611EF2FA5
-:10C4300001DE6739FB52000F4715D509F5359030FD
-:10C44000885F33BEE6BBEFB303BCE6E758F1A2DB7F
-:10C4500001BE0B02C3F085F70BB404F8D2845C2153
-:10C4600066B91224A7D8FDE6CD876E03FFF874F6EF
-:10C47000C9F7B2C247E3D1AFB05312E5E59DE4F28C
-:10C4800078B47979271DCCAF984106AEDF2D0DA782
-:10C49000938F0F6E90730CF424E8F4699EA72FFD20
-:10C4A00092E7FD967950FFC5F425A383725E9A0149
-:10C4B000F465A083D9FB5C5199EEB394F79F01F426
-:10C4C0003025A62FA33677402904BCAB5DB23CDCF7
-:10C4D0004ECECA0820FEA7DA34C4FF34EA8171BB0D
-:10C4E000D39D4FF75FE1EC6DB70710FFDF07FFA6A5
-:10C4F000920410FF9516BD53EDAEB3039D543BADB2
-:10C5000078D610FF35DE61BFDBBE0AFECF01FC0B23
-:10C51000BD320AFB94E27F42FE08E78D89F07F413D
-:10C52000BEFB8CF23205FEAD781772608FCB5BEDEF
-:10C5300086787023CB4B9EFAF2B8762867AD0DE271
-:10C540007D993DE9EAAFB0BE85D597F56932BCCF9C
-:10C5500058B49ED6D3F29E60A81ACAEB3648284734
-:10C56000A7BD166E87F2B88DACBE7453CBAFE09DFD
-:10C57000B3753AEBFFF4F14E7CAF22D2C9FB57768C
-:10C580005743795D17EBFF478F5307BFBCFC48A4A7
-:10C590001D7E9FB895AD43D87D7339BDED919EF852
-:10C5A00015F6EB66FD6E38E44C66FE12B3E3E6F07A
-:10C5B0007DCE7D88EDD3F7DEC5B5010AF7EB0675B4
-:10C5C00007CA0D5B5339CAD1047E5AA5D45D00DF7A
-:10C5D000F9544E10C43BA5D34296B7DA43A75893FB
-:10C5E000CFEC2691EF0979E78B0CF85A93CFFC0832
-:10C5F000D12E2B83B0FCE407D9BBB3221F357A3F81
-:10C6000091207E007B44FD9B203F757E510BEAD339
-:10C61000F9E788BCD401FB2A3A6FE9977FBA289ED4
-:10C620005F7E4B3EB3938EF13C7AF17B63246803CB
-:10C63000FF640F100FBE03147D19EC963DF0BE9100
-:10C64000E11D923D4156D6F3F7DFDD459DDC1B6CC5
-:10C650002D761D94C05809DF55B9AC8F44D352874D
-:10C66000AF7FBE9D4459FE045BFFF5ED4ACF1683B4
-:10C670001DBF54888F59E351AFD4713C09B9B194AF
-:10C68000E38BF2F9E67CBAFE65CE16B41B9713A6CF
-:10C69000D76F24118C6FDC68E1F335EE3FBF65B3D3
-:10C6A000411CCDCCCF6BE972D8F9FAE0C3BFA3F03F
-:10C6B0006F7CC0E305FDBFB6D7DCAEF181978F304C
-:10C6C000FBCBCCEF8D82DF23667EA70605E3F7FB6D
-:10C6D000CFC3731B713FD0E51C7C4B27B1FD0EE926
-:10C6E0007D0BFFB9E0BE6031F8353696A7C8CB6246
-:10C6F000DE4FBB995ED6A95EE67E108ADC4FFB2F2B
-:10C70000C17CF852A147B99C11FC5CCAF5FC303DD4
-:10C710005E6BF577EE433E99CA4B56FD2DF4B6B8E5
-:10C720008748C745FD4DF5F5CB1A5D6F9FCD1D01BF
-:10C7300078C7F47604F9688A93CA6B1BE2EF00E0CD
-:10C740006F1AC75B3BD7EB09FD03F7FAB8FE01F59B
-:10C7500037F01C61B85F1035D9FBC3CE3112D8FF5A
-:10C76000437873517B2A05FC7DC2ECE23C32AA3C43
-:10C77000112AB7DFCC1F416F2BCFB0DF0777B8305E
-:10C78000BE20E2EC82FF5E2F6076F8B65CED3D9055
-:10C79000FFFD7CBE7E3E7EFFCDF3F1FCFBCF44C3AC
-:10C7A000F36FC867CA8F937F01E7DF1D8678697FC3
-:10C7B0007AFC38F8275CFE941610FCFEC9AF7D0A9F
-:10C7C000EB3FA6B038FBB164FE4D65E714FF3BD4E8
-:10C7D0009EC98F4CFE15EF911FCB30C7E7453B3FFD
-:10C7E000FFBEDFEA0C7518E2E181FB935A408FF936
-:10C7F0008B785EFC7A46C7279F4ADF617C272E50E4
-:10C8000050595A300DDA694A2EC4679E62FAA2D98D
-:10C810003EA0C0FB3E3E7F38A5C00FF79B88F604C4
-:10C820008C1318509650789FE4E7FE27F97B402739
-:10C830005DEC2BD6152858540AFD4EDE3C80726301
-:10C84000A8BC6800E542A02084F39E5C2AEA79F93E
-:10C850006E5626DCAFACE47C8271E33871E2E171A4
-:10C8600061F37B37EB94F8E7D5A4C0638AF7AED8C1
-:10C87000CFE2902B9DA4339FD65FBD3F1BFD8DC69D
-:10C88000547D02D0C3D78DE39E1CD387FBDA523987
-:10C8900038F6C1323C17C678D1DAFDCFA1FC5B2B4C
-:10C8A000F866AF996F66178CEE3CC51A671F053F97
-:10C8B000CD2F18C10E7A12F4972386875B787E53AA
-:10C8C0008DDC540D71A54F5713BC677BCB0B32D257
-:10C8D000D52D3F92F0DD0961C7ADE5704EB42FB89C
-:10C8E000A71030C815B8A71030F875704FC158861A
-:10C8F0007B0AC6F6704FC1580FF7148CF5704FC104
-:10C90000582E25D7B6439C6E5D17F14602ECDE82A9
-:10C91000B13FDC5B3096E1DE82B13FDC5B30963FBD
-:10C92000250C6E9F3E2463FC1FEE2F18FBDFF0C228
-:10C930008FCBA3B06D17CB536B7751F8031DEA5A19
-:10C94000DF240A9FD51C3E70BFC138EE07A9173DF2
-:10C950000FF859DD77FD42F85EB0EF26D3B8A49BFF
-:10C96000C9E316FA17E0783D09A5813F37850C1E0B
-:10C9700082784773445261DE1B1E30CBEDA1F74C29
-:10C9800022E6DFD71043FC37383CEEBFA5C0E343B7
-:10C99000BACA2379C6784F8C1EDC6A14E0F09AACD0
-:10C9A000C6A38752726E1AC6799E97218641FE48A9
-:10C9B0005AB6CF920CE703167824E598E9C21530F1
-:10C9C000D3454AB1992E3CAA992ED22ACC7491AE65
-:10C9D0009D37227C336BCD74B2466E42BE1770AE6B
-:10C9E000A07F01CE53E0854A802FDD27C48BADF0B8
-:10C9F0006DDCBFAD13ECFE3385EF9316F87E466613
-:10CA000055BB03585DE72C8FD93165CFB7E021B016
-:10CA1000357E2AE028EC081107A5FA1FEDE9985F9A
-:10CA2000CFFC3D6A1F1C2CC0F303E6E7012581DC27
-:10CA3000BC8E84513E5D67B10F6E70DFA7807D3084
-:10CA40006CBFD43283F70BADFB057B8B18E25256DB
-:10CA5000FB40DA2F453D9361BBFB859C0E7F89C669
-:10CA600090268D466EF47AB4FF02B9058EA2B3DC2F
-:10CA700014378E6BF7897508B888F993488B9C0337
-:10CA8000F45C6CB5CFCCFEB5F0C745BC5DC4B585D4
-:10CA90003F2DFC182B9CE57382ED40FF53BDC28FE8
-:10CAA000EEBB0A7E17FEB3D56F1DBA170090857BCB
-:10CAB000373C4E7FA77F9593BDCBC7F84EFCDEE990
-:10CAC0005B9C36523EE61DADE67B30741BDA88F780
-:10CAD0008A00645970EE4420A842B65E7A6800DE8F
-:10CAE000DAD97AD98B83CFD2EF96921F0C6C82BAA7
-:10CAF000535FCA00D7A1783E61F78415DE4F29E85D
-:10CB0000BC19F468B26A27EF1AE8C24935D5BBC52B
-:10CB10007C5ED0133943F5BF319EEBFFA3BE775146
-:10CB2000F8BC3B7E847A456D8C67D759E1259EC35E
-:10CB3000704DBAE838D8272E62D837EA4343598E69
-:10CB4000C10B55AB8CF7A644BD06EF977CDD7D018C
-:10CB5000DEDF7518CBD157DE7718D71F617905F660
-:10CB60001081FC5BC547EB8DFA65880E2943951B48
-:10CB7000F6378A7D01D380FBC9EC1286EFBFD5BEA4
-:10CB80003A2CF88271435967F5FAF4B37C7DD1B33E
-:10CB90001CBF64D1D90D3F6DD1D90D3FFD2C5F5F16
-:10CBA000F42CC72F597C76AF4F5B7C76E3573FCB95
-:10CBB000D7173DCBF14B969CDDF0D3969CDDF0D39F
-:10CBC000CFF2F545CF6EFCEA6807BA2BA204DE97D8
-:10CBD0000874103518A0262BFD19FCF92295609ECB
-:10CBE00006E17E4921F74BB66D6DA90717EA115D85
-:10CBF00009603C88FAF739B47E2261F58F742DC63E
-:10CC0000386BDB980979F05E95BBEBA2E3707F6F20
-:10CC1000A2CEFC71EBBF1BB64833FFFB6B9757648A
-:10CC20009ACAD3FACCEF575CD55864AA5F1E3EDF90
-:10CC3000F2EFE74D35FFBB64A19996F7206E26C64B
-:10CC40007B918524AA427CA5F06E5B159C9BD9C183
-:10CC500067BE90FEB753C17E1AFD6BF45F0AA92729
-:10CC600034347E10E0A698C6775BEACFF41EEAFE65
-:10CC7000B1F1EFA112786432CEBD736B1E26B1DF25
-:10CC800088F13981AF3B37DBD0E5FD6C2BC1771ED6
-:10CC9000AB23011BBE83CEF1763E273DB1EF48ABFF
-:10CCA000F93E7AA14EAA009F451DC406F1B5E04E9B
-:10CCB000A26A04E34248278FE8F1E9E411E2AD8279
-:10CCC00077B91E8910FC77B2045DDCE908E4C1B9CC
-:10CCD000DAF95D8C1E049D04804E52212FC8FAEEB5
-:10CCE00080155F644A94AEF591AD8519C67C54B247
-:10CCF0009BC1DD49FF8E84AFE29D667C0588A1FC67
-:10CD000015F0F5E9D7C497E20B45D37C10CF240189
-:10CD1000C8933A3866820DE011EC52D1FFAFA5CD31
-:10CD200000CEC12EF69E9AC093186F6B2B89CE331E
-:10CD3000F87F4135AA019C6BE44955907FBEA30C56
-:10CD400043C6C3F0B383789321EEBDA3CB968C6F1B
-:10CD500054EFA3782921E4BF372F4B2BA6F53D4193
-:10CD6000920CEF6CF5B4D9F0DDB29EA7A47AF3BBB8
-:10CD7000CAD1245B0EEE23C956815F3BFB6AFC4B94
-:10CD8000ECAC3E2A4379ECC661EF7EC8509F5E6BE7
-:10CD9000F97703892641FBE473581E679A667ECFB4
-:10CDA000C651619607148C7D39E5106FE1F4CEDF32
-:10CDB000498DD490C826BAEE73B8DCB1D251FA1DB1
-:10CDC0008B9198DAC67C03E5594F9B82F077707996
-:10CDD000453632BAD0E95FA0A7740B1D7954331DD4
-:10CDE00039E402CCC3157C25D623E66F1B93956CE2
-:10CDF000C775D9F13D6C87554E58D6E7866020C57A
-:10CE00009DDB4722115AEFD0197F10B91F7F774C55
-:10CE1000272433F815D6F935E553E89CBF8D7CF20D
-:10CE2000F031EF9CC6F6F999CADEB5AEEE60F4EECD
-:10CE3000D9CAE81D6E74B37C2D6D61AEE15C752FAF
-:10CE4000975356B879FAB46AA0E78BE49734C88F41
-:10CE5000B8FB3546FF6D630E3F0FE5AD7733F8073E
-:10CE60005586674A2F6A942EFDEE3BDC98173CB539
-:10CE70008CE20BF0FF92599E4CEB33C3B1C82237C2
-:10CE80008209E06AE5D74470FD96806B39856BD1E5
-:10CE900099C355D1997C4E9FC5DE593C384661FFF8
-:10CEA0003EAFCEE098AEA9287F2F924F45D368BB06
-:10CEB0006D1A9537749DB51A83B7779690E36678A7
-:10CEC0000AF922E05FC8E1EF55BD2FC0BFF3E2D6FB
-:10CED000ED2420017CFF5B033BA27B9A9037830407
-:10CEE000F096A631BA1570EE9ECDE05CA871387749
-:10CEF00071B8494402385BE9D52A9FD3BE269C7796
-:10CF00009DC3E3F159A4FCABC0795B0A7B47D931DF
-:10CF10008EC1D5E11E8C829CED0ADA715F07820A10
-:10CF2000D67795B0FAFB5356E680BEEDF277E60071
-:10CF30005DB605AFCF01F9EECAE1728668EEDCF2AC
-:10CF4000D8BD831A792BBE43DA1950103F9E407C1E
-:10CF5000F995362BECC47926D9898C7078488D07E1
-:10CF6000076799629297F98D66F8A658E0EBFA9AEE
-:10CF7000F2E1B5AF291FEE216CFD778E17EF347407
-:10CF80003B513F55DC8471F34C3ED7E685DF65BFEE
-:10CF900073BD66F8BDB610E489DBAE023C13ADBBD1
-:10CFA000A795F0F75A9CFCFD16F6AECB3678D785E0
-:10CFB00096BF03EFBA2401FDB3775DB6C0BB2EF474
-:10CFC000DB05EFBA9C0BF6B4865FF9D2427C7FF0AA
-:10CFD000B35A82F1F14D297F25F1E055D465D67F12
-:10CFE000413DD9F20E9B59CF65CCCB3395BDB3CC27
-:10CFF000EFB67954F66EDBFF0164680340008000F1
-:10D00000000000001F8B080000000000000BDD7D09
-:10D010000B7854C5D9F09C3D6737BBC966B3B9924C
-:10D0200040124E42081B0861810483829E84406343
-:10D030004D71435151A88D40314248285E1A7FF509
-:10D04000C94282841834A0585A2F2C378BB56AB441
-:10D0500051A922DD2052FAD5964551F152BFF55221
-:10D060002F40258A177C3E5BFF79DF99D93DE76425
-:10D0700013C0E2FFF8FDF1C1C99C993367E6BDBF5B
-:10D08000EFBC332184906FE8BF04CF0412F410FC8E
-:10D0900081BA433D9704EDD1FA23C3EB1C6A3A21D0
-:10D0A0005677A5E139F1F7115F22562D248390546C
-:10D0B000DE365DBED71E2E26644DCDAC24520CFD4F
-:10D0C000B450266D4F80469590D5566F968F3E4F43
-:10D0D000A85954435C84AC6A2124388A90F6163BE4
-:10D0E000962B726CDE601A2177BE2C7BE3E82B3620
-:10D0F000CDA7B969FFDE9C5B09A1CFD7B80919920A
-:10D10000479FBB9711924F88423F20D1BA5233E3D9
-:10D110002352425F98B3849049D1F9ACA9B1788386
-:10D12000A584C4253BBDF07D52ACBC13A66D6EFA40
-:10D13000DF37F4FD6FE0E782681947583BAE13BE56
-:10D14000A3EAEA04BE676C6F7E537A74AFAE7DAC1F
-:10D150009A98F63E2CF61C72CE37322DE579497539
-:10D160004E5A96A71092D5FF7B5FB69047F78E4434
-:10D170008012920E653D01782A7CCCD5C9B3ECC4EF
-:10D180001985B378BECACDE01B27D1CAE4FEE3B649
-:10D19000015CE3A2758510AD1BF0915D1AB3BF2849
-:10D1A0002906082923A4B32578F03D6BF4B9730A46
-:10D1B0007DDFD9BFFF4C55C679CF55552C9D4A9080
-:10D1C000B869BF442F7D5F0717A77666DFA73FA525
-:10D1D0006974BD2E4E37E477920278B5F37A8254A3
-:10D1E00037572D037CF9081941FB956BA4AE987D48
-:10D1F0004F13EF49502AE41D41DF79AC74D3760612
-:10D20000522869BBDDD8AE6620BC705C25FABEF63C
-:10D210008D34F0BCBFAB12F0F8CEC841DA6DDE7AC7
-:10D22000E0A77ECF558B80635F1A859BCCD71B030D
-:10D230008E6DC0DF028EB293C1B14DCADB19A6FC60
-:10D2400066D55C5E8A115291A676035FB6694EE49C
-:10D25000CBB6B4EE5025AD9F28B57861A8C49195A2
-:10D26000C88F6D43F71D5E08709DB9FFC36D08350B
-:10D270002D5425E04BDB133DD5A12A9DBC11F88A26
-:10D28000E7BF778C7D20BC9296A917CF236E4A2AE0
-:10D29000CE21362253BC384656D9EB9C51FCD8E0FF
-:10D2A00017FA3C3E6DC64732E5FB78AF0E8FF0EFC4
-:10D2B0001B564778D0C5DBB26FFDB904449119E91C
-:10D2C0007700E6A3A8BEE8FCC8D9C717C94E43BE7D
-:10D2D000278A3713E4657F7AF733BEE7FD06E60B4E
-:10D2E000D66FBA5C93791585CB9A17987C241E2645
-:10D2F000176C7686CF354463EDD98A97BE41D664E4
-:10D30000AE44F9D1AECE6F07F9F979A685C8123CC3
-:10D310005F6F07F9A198E447BACF62D00743E6C42C
-:10D320001BE4FE9A825928CF069A67569DF1FD614B
-:10D33000F5C6F77396A518EAE23D6BE6452F55A5AD
-:10D3400046EBAB943A3BC8915B33D74B753AFA1E28
-:10D350005254F73AD0ABA8DB3267E27B7139A53182
-:10D36000E7B5CFA3BD0572A25D65F326EED870BE0A
-:10D370008BEBA1BBB91E3AD53A37F2FEBFE6FDEF03
-:10D380006D716319C167C13506BCACCEA2F29A8E2D
-:10D3900007B0D77FFF29B5EE73985F14CF96287C2E
-:10D3A00080698B175B805FC5386D59F90EC0DBFA59
-:10D3B000EAC1E727F4AAE867557CC44BDFB312A3A0
-:10D3C0001CB7A5590CF89890C7E5C6B66B0CDFDD05
-:10D3D0009B3C63631EA5ABF587648274F73BE3FA5D
-:10D3E000FAD3AB711DEB33D9FA07A66FD3BAA944B0
-:10D3F00088D011D6534CF5A1A6FEF9A6F6D1A6F613
-:10D4000009A6FAB9A6FE95A6FA0F4DFD6799EA5747
-:10D4100098FACF37B52F36B52F37D5FF8FB17F2983
-:10D42000C3F3F5E2D920F205F4BAB9BFA268885F68
-:10D43000A1E7237CE536F2E30F722AB43C66671855
-:10D44000F02BE8F374F1B39ACAB810F093A23A50F3
-:10D4500099962F267A7A589F998FFAA38D4E0BF5BD
-:10D4600037B75F52041D5773FB70CE12031DF5E6EC
-:10D47000143AC07E24CE34944BA7A20B89A418DBA7
-:10D48000B5A1D1F67CF8FFD9A58B53D37180EBDD24
-:10D49000C1E72DE4C023C37DD7223E02D49E1E1BCC
-:10D4A00085931AB1A7E9C728DF6D49238138AAEF10
-:10D4B000B6F82D58FF3C937E08EC952AC687237852
-:10D4C0007F42C2128C23E6D3CEE9651DC8295ADEFD
-:10D4D00001728A96B7B56462B97AAD256B218C5713
-:10D4E00063433CA58EBBD5AF4059595E04FAFBB6E9
-:10D4F000B13B340BAD279E94497022B5174AAE2834
-:10D5000087E5244C9F9FB9173EF735FDCE24E04EAA
-:10D510008246C6E62A12B08E2364ED9EAC1F7AE8DE
-:10D52000B86A81E275405BB177859286FDFCE03692
-:10D53000A84ADFFE11B43EBCC082F685B5BCAF057B
-:10D54000EC7731EFB53FA4844B3BE6557B2D7E0A4B
-:10D550008215C3EB7E05701ADE492C1AADAB7E55E1
-:10D5600002B9F6469E8AF276EB1F28438E800FF5AD
-:10D5700065819EFD62AD6D25CC73603C11D952FE74
-:10D58000ED4B310EDA9943F1B906F4AC2A484274F6
-:10D59000951F76C13C9D32AB3F9777CCB7B2385AD6
-:10D5A0007F2CEF987B256DEF9C986B8175E4A5B976
-:10D5B000B4400CBA3A0CF218D6B776D170BD1E340E
-:10D5C000976A0D1D77082D8B7909B4760EC09F9749
-:10D5D0002A7F9EC9EA0738DCD466DE9EC6CAB3FD40
-:10D5E0001DF3F8AFE5B9855D3A94FB8FC5CE8C414C
-:10D5F000EDD3C37965FDED532AE886029D6FB27ABB
-:10D60000875AE8D89BD6DA889FF2D4A61C827EA2DD
-:10D610007F8D2DB01DF84351875EAAB3BB026B32DC
-:10D62000AED0E8FB0189CCD1CBC97B399CEFCA973E
-:10D63000707ED3E5637E99D2EF263F413B6B137139
-:10D640003BC01E89E0DBFFB90FE990E3BB2ABF6A4C
-:10D650001DD02959C8F4667E549EAD50E8389B61B0
-:10D660001C5ADFDC6EC1F96DDA45F9977EEAF39B4F
-:10D67000DFB180DD3C96042DB0BE312480A5872C1F
-:10D68000B30050BAB91EDFC6F9B790F237FA3B20A3
-:10D69000FA68FBA5C3EBBE06BE48222AD655BF1BBF
-:10D6A000E9A9715772652CFBC0966FE17E26A957D8
-:10D6B00026713F87C1D9965FD61FFE56B20CE17E18
-:10D6C00093C767CF07FF6EE7C1E030DAF4C4AB461B
-:10D6D000BA05A8CCD2C99D1CFE9D24AF4F93E93852
-:10D6E0007B72EB92E1FDC6FA4FF665C0D07E3FBE7D
-:10D6F0003F39DF8DFDAE08764F8761C679C395400F
-:10D700000B63AB7BF700C98CD136839B413CE53F73
-:10D71000DF93AAC23CEA86C23885A17005908FB318
-:10D72000FE603003E773BE05E86204CC87D3472D63
-:10D73000D2978A7422F00DF4504BEB573430F850E6
-:10D740008310DB89E236CC7FCB2A4A27CEFE749247
-:10D750009ACFEC236F148EC43AB87FE5CD8F41BFCA
-:10D76000022EB37ABC560817F87EE75E053ED0CC91
-:10D7700040DF5E077DDE9E5B770EACB374A3AF1512
-:10D78000E8CFB92BE4877E024ECE29214DC27EDA46
-:10D79000B9D06FD3CD9595A817BA08FA4B427F9AA6
-:10D7A000F16F9D62B4F708E9C2F58CEC32DAE994C6
-:10D7B0008E519FF7A3E39B23741CAF8F4B08FD137F
-:10D7C000E8B4C47BC0CFA0FE078E35801C7980EB07
-:10D7D0002541D7E27901891D67B8323FE2CF66CA99
-:10D7E00083C3FBCAFC18FEAC0BF86304F2CB7CC00D
-:10D7F000879BF461FBF09B8DFCD2B8F3937DC3E86B
-:10D80000FC9DA5EA04C08FF87E03C737A5E3C54891
-:10D81000C71BFBF6815E1B7E33A3E36BC1D6488F2B
-:10D82000D2E34D1E6D297C47D099793D4BF87ADAC9
-:10D83000737DD7C278576CEC7EDE81EFF9AE473E40
-:10D84000DB180A3A4814BEC3397CE36E89E0D90D6F
-:10D85000F263568DF779D0CF3E8F7B3A9433D5BEA5
-:10D8600036302DE6D6CB06BBCF8C5F4A5FAD485F26
-:10D87000C4374D92C09AEDB6A2FE1C806EA27AD338
-:10D880002FE8FEE653C8ED3B62E1E174C73F99EB38
-:10D89000BB1BDE4FA9F611E4D3D39DD769F61371F4
-:10D8A000B3A81D1BB0EBED5841F71DEDB3D04F16DB
-:10D8B0007810CF57B5CFAACE033A772ADE58FE4F5D
-:10D8C00044DF703ABF9FD3F97A6E7F7571FBEBF638
-:10D8D0001615E57B678B07CB8E162F8F879663B95E
-:10D8E000AA45C37EF29A4F2BD07FBF99605C6B65CF
-:10D8F0004289148BAEF2FC467B7F78B311EFA9D539
-:10D9000046FF3B596F2FD37F49E5F986F644EF6810
-:10D9100043FB69C48B0F00DDDBD22A0DFD48F813F1
-:10D92000837D2BE0385D9E87F1620A4FB4AB853D65
-:10D930002BDA09A9C378AED5E467769AECD80E80C5
-:10D9400023C297C1B10BE088F02DE7F0AC667E13DF
-:10D95000F77BE285DF53B47ECE7C8C8B1094572B03
-:10D96000726CA89F3BF298BDDD8F7E3275F293F208
-:10D97000FCEA354C9F0B7BFCF99C57AAC1AEDD92AB
-:10D98000694139B9256D8F672BD6E3BD4C9FFABB32
-:10D990003C147F560F8F57538ACDA2EB4DE47CB3D6
-:10D9A000DA4A30FEDD91EEF4421C2CD1B3A806FB1E
-:10D9B00099BE4BC8CF89DEFF23EFD51BEC0EA25CCE
-:10D9C00063586764FEA536368E44241827A5D866AA
-:10D9D000C09F9DE8EA79305F5B148F79B05E8E2737
-:10D9E000939D23E214663CB96B8CFA6675117BBF7C
-:10D9F00037E701C4BB19BEAE2A23FD7670BA684B67
-:10DA0000DF827C68EE6F1E9F4C8937F87F1D9EC1B8
-:10DA1000E324C29F16FDC08F76C7E86FF6A3CF86BA
-:10DA2000BFEEC6EF19F55D0C7F7DD2085D3C49C0A5
-:10DA30003B8207115FE47E98885B8BF114C2C6C3FA
-:10DA40003AC6B7FD28FF7E99E0423FB2C0690B801D
-:10DA50002C2CA0F3003A6EFB55426025ADAF4B98DD
-:10DA6000D99744EB05DB6415DB9DBEA11067EEDDA5
-:10DA7000306368987EF71EA9EEA211BA38DCB6E4CE
-:10DA80001B32993DA0BC13F600934BE8E7FAD74D43
-:10DA90000C69608F1711EF76025E306B17F444F457
-:10DAA00075B97FFDB3114CEF66CE25CBBA63E07F2D
-:10DAB0000D6F8FCA715F3CCA6B2EC70B38BCB6772F
-:10DAC000CD8AD7CB71DDF3A4587475B6E4771BC843
-:10DAD000EF51F09D1735D4DBA584CBEF47C8F75144
-:10DAE0007E2FCBAB5B3DA22CC67E9F1246F93D51EB
-:10DAF000D5DA01EFE9E0EF015E7E4AF112631DCF56
-:10DB00008E60F6CDF7152F42AF6EEF7A9CE1A558E7
-:10DB1000E0E57612CBFFFD1EE0E569807B3FBD4A64
-:10DB2000C2B80FFB45B6F60CB43FA56ABB007F1127
-:10DB3000FC5C169B6FFEF91DE3E77EEEB7AEE7F8DF
-:10DB4000E9E2F1F1DB397E3AB9BEEEE0F869E7FAD5
-:10DB5000FA56C04FDC99F3CDF066237E52ABE34D0D
-:10DB6000F830E227A9DC889F44AF113F099ED126F7
-:10DB70007C18F1935EA022FCE2328D78EAC737A7C9
-:10DB8000F057D2609C187672765DA802F6B886CE01
-:10DB9000E9EEB5C220BEAE0A28C57AEF35F9A5A2D6
-:10DBA0004C2F6078CD9C161BEF16DE1EC8D7A40242
-:10DBB0003D9DFC20361FDB79FF63AA1667E87F5185
-:10DBC000ECFE2EDEFFF5E15AA2BE3FFDB94B1EC4AE
-:10DBD0005F30AF3F41D2D20B701DEACE30C5FDB6EB
-:10DBE000156C1F729B43ED86FD7CFF0AA777BB8AED
-:10DBF00023F9ECE01FF171883F09C7CDE59F19EECD
-:10DC0000DCFF15ECFBE52DC81E7A356DCF5B9E79E8
-:10DC1000A48E96A30B46E03CF3EBBD7B00CEB26B2B
-:10DC2000CE50B67F3CCFFDFE184A6AC154E91B7046
-:10DC3000B8DDB1F7ED4529F42995836807D2890449
-:10DC4000B6533A8D5388929802EBD5705D56B06307
-:10DC500065586F17D6E34937964E1262FBD7DC1F23
-:10DC60003DAF200FC7731337FAAB29C48BA5E06310
-:10DC70007B1A51D227E0F86D7113082AFCF3C05FBC
-:10DC800075666FEE009F46A3509884AC82F090EECC
-:10DC9000DA87EB271EA2B278DBCD6ECC4FF8335D6E
-:10DCA000DF98D35FDFE9F6FBD2E12A21498434DB38
-:10DCB00059F98B78D71628BF74E4062068A58DA87B
-:10DCC000FB31E0D55F49D0FEF0BF951068C5C92E85
-:10DCD0003B87F907A73DCEBCB334CECFCED2388D2B
-:10DCE00005E9A71EE736F87532EC63FA9643FFB6EE
-:10DCF000E44968778AD20CD77D1EED06989F627F33
-:10DD000029F7BDD4A8DDE67C5342BBAD4D0A12888D
-:10DD100053FADF96D0BE22C50C4F4E9578F2C64519
-:10DD2000C7717A970D67F12E16EF59F1F75F8C02E4
-:10DD3000FBFB970933C349F4FDAD07A99D0779346F
-:10DD4000D3BCAFD7537A4A4FB579B750FA49E57E7D
-:10DD500072DCDA4907EAE9AF9F8C62FCBDA365BFBC
-:10DD6000BB8D0AA444C57BE104FA9E93EFDF12B990
-:10DD7000260C7663E22445853D8E2239580DF32525
-:10DD80004D16027C714F83713FB7B3B008E122EAB0
-:10DD9000C3F87E2E2955FA227936D48EDF58C0F387
-:10DDA0006A5CC40576A1F26F2D2956DE8328C5FC76
-:10DDB0004AD3A8DE4A82B820E5145A96760631F98D
-:10DDC000A3D21BB4831DBB2140FC360AA707E7FB87
-:10DDD000AE81F13ACB7D0960976F3834EBA2B17414
-:10DDE000DEA1B0E205100447A5E0BA439ABC368133
-:10DDF0003EDFF9A6C50DEBDBCADFEFF449C8FFF73C
-:10DE0000CC23013F85C7D6863D7619ECDE90858C04
-:10DE1000443B973A5C93B82854215ECBF8FE965168
-:10DE2000E9F8B027B43C19E0B22EE1FC9046C7AF48
-:10DE3000AD6671E71972F6F3306EA8D386F849E73C
-:10DE4000F94712A945FB39659ECE5EA6FF123B99A4
-:10DE50005F19BA8E60DE535299D3EBA7DF7B22CCD9
-:10DE6000F68DEEA96671671709E2F767C8BB1C1645
-:10DE7000FABCA75A71033D2599EC73278C4749AE2C
-:10DE800067231BCF359E8D9768CA83B28B79B9E91A
-:10DE9000BC28FEE44405F1ECAE36E64FB94CEF3950
-:10DEA0004DDF7B59E0399B14029E4FF86E98F812B3
-:10DEB000B67AD558F9139D2D2454A5CBB7700E1002
-:10DEC0003FFCB290F909B6ACBD7698D709DF2B6953
-:10DED00010EE7AE15FFBDEBB03CA7FFF574F135D95
-:10DEE000D75FBF3ABCED518063F36D2F221D72BF27
-:10DEF0006A084C81CEE7F95A1BC2B14C63F101525A
-:10DF0000DABBD75A8AEDB8AFB5768F03DB87959326
-:10DF10008083C27398A265FD0CF835247B57A83026
-:10DF200088E6CC9A44D85615ADAFBD92120E950F27
-:10DF3000E9F334D95F0CF190174822C5F7064D522A
-:10DF400059FE9BF43CF0534E95847E58CE219F039E
-:10DF5000E8E1C46C0BE6BFACA8BDF4C29174FCFB55
-:10DF60002A148C375457555C0EEDC30E317A715D0F
-:10DF7000C7F047E114ACA2FC30E2108B279492B0BA
-:10DF80003748DB877989350DF4C73C0A60985F27ED
-:10DF9000C70F8F0F949686FC00D444AF118F6E1379
-:10DFA0001ECD78758DA47804FD52448A985FC7EC25
-:10DFB000C75ADE6743D544F45FEF5189DF3AAE3F7D
-:10DFC000BE5EA4F6A346EDBF10B51FA1FC1BB51F96
-:10DFD000A1ECA1F62394895AC545A574BEA1743A53
-:10DFE0002EF05F4DD94AD81FB86FEAD537FD93960A
-:10DFF000657C9F8D726A4A25FDCE2CE062565FAF2C
-:10E00000519BE4A552D9505F9BA6887D3C3FE8D444
-:10E01000C42C0BDFE79971A746EB9D990ADFD76304
-:10E02000F511C5C450EFA9B118EAE7EDD18D3F0550
-:10E03000F01387F5092377AEF71744DBEF28A475B3
-:10E04000DA7E80DB73B54B2DBE2D31E877D948469B
-:10E05000BFCABF895FA2F8FAAC80A09F2E5B349440
-:10E06000DFA4505141BEF6D7CB540EEAFDEB022A95
-:10E070005775F191C3853CAEEEAB60713612FDF978
-:10E080007A12CFB322F0BC330476C4ADAF5EE90D93
-:10E090009281E5AE355339A2A7938B051D8C2423BD
-:10E0A000D19F27530E54009D754D54801E4A391F31
-:10E0B000106EC761889FD2CF539FDEFD174D053F7D
-:10E0C000ADDDDD3612F37E2E1FA9CB935995BE68C8
-:10E0D00022E83391F7434895FB7DBA2EC97FA90505
-:10E0E000ECB681ED1485BCAF83476FED8C24D00373
-:10E0F0004E2EC7CDFD57B5EC7C05BEBFBAA51B4B58
-:10E10000679A0F858C5DF163FC669FA7AE11E6658B
-:10E11000CFA6ED3A396C4BA3EF19FC806C667709FA
-:10E120003CB809C683C4BEC986CE09F17114189DD6
-:10E13000545F807CDE109A8579159DDE0983C6AF19
-:10E140004EC5275BAB5E2269148E4FBE3AF32FB3E8
-:10E15000697910F88DEAC12738DFE4943FF6DAB523
-:10E16000067E396AE297A3267E397A0A7EB9E04EA6
-:10E1700068EFC9540CF51CE0175D7D6B845F583D5A
-:10E18000CA2F47915FEE79D986F58D238F1AF865EE
-:10E190004521AD67EBF865BAECDB12C30E78E53BC1
-:10E1A000E2975F9F29BFBC7166FCF2C4D9E3973F39
-:10E1B0008E4CFFEEF8C5779AFCE2EBCF2F87605EBE
-:10E1C00067CA2F9DEE20E60376CEB6540762E0FBC9
-:10E1D0007A8E6F11F72EE3718A69F3B4CBC7823D53
-:10E1E000CBF3D6443E4DE73CA6BF57D4CE407DB9D5
-:10E1F000F520D397423F97713CFE8DC731CA424C00
-:10E200006FA6974BF8FE4C4D0AA8F4D74E6A12A49D
-:10E2100082BE9E22912E1596BAAC76A414B59BE8C8
-:10E22000F7D06EBACFCBF266C92166EFD8E97F404E
-:10E230004F17975B0D7A7588D9FE32D5C53EA6D8A3
-:10E24000BFBC0FF212283CBE1EC9ED2693BE15704E
-:10E25000D870A812ED90CFB36D83EE5775F2F546E6
-:10E26000ECA9525F45AC78587DA184F0BEC9A3C526
-:10E270001796813EBE0AF5AED0E766BDDC53F59237
-:10E2800051CEF8C7A75616EBE48C7F3CEACD889CAC
-:10E29000E1F501E50C3907E546442FF37A442FF305
-:10E2A0007A442FF37A44CEC0F8D951BD3CF281F1C3
-:10E2B00077FA757A7B19D4B34FAD9717707970B62A
-:10E2C000E5CC1FB8BDFA5DE9E5CA424E2FFFB99C07
-:10E2D000A929FC0EE54C2DC899A453CB995A90332B
-:10E2E000C506397355E1B7D0CB890DBD7ED8BFBF08
-:10E2F0006200BA77707C371568D7C0F8A4E6F4F2EC
-:10E30000B6CD74D55BFBC0AA0CA0172FF3F3067A29
-:10E310003FB1F9F7AFB4E9F2A21395103B5FD1FC1E
-:10E32000243E9FDB7010E365A79A6F7D21C1D2ACBC
-:10E33000477B6BF7D9916EBD16DC13FFB6F3E89CF3
-:10E34000CDF8F28DED4FAF073EBA8FC7FDCC76AE5C
-:10E35000C0EBE9DA3FE6EF5E3F52C571CDDF3F1516
-:10E36000DD523ADD0C747A22FBBA31E0E7C98977D5
-:10E370002500BCBE07FAF0C96F43A7AF8C64F83C18
-:10E380008D750761FCEF6ADDFF017FBEFC6DD6BDB8
-:10E39000A090D1D569ACFBBFBF4B7CFF07FEC26725
-:10E3A000DF66DDCB04BE093B2FE3865F289FACFF11
-:10E3B00057E1DB10BF58FFEFD18FC13ABBBEB26F40
-:10E3C00086F805F9FA1BD9AD3F3F45D8B99944FE07
-:10E3D0005EA28F9D877157EBCE4791E879295C0F3C
-:10E3E000C63722ED07629D97FBAE4BB047DEB10EFC
-:10E3F000D26E63713BF3F3FF2E90D83936A9D60164
-:10E4000079F1BDB3F760BE41E7EC09B86F65B6536B
-:10E41000C47B3D2D1AC6933A5B7C58DEDE521D82CA
-:10E42000B8C9932FBD25413E58E94B0DA8DFD64E04
-:10E43000FAE130CCE39B5A1A0FF5DB4D768A8BDB81
-:10E4400029DE51AFDFA9F75F9EFC4D13CA4111874A
-:10E45000BA2362BFD0F7549D9F44EB400E113F0991
-:10E46000EA063F69D97AB05F7AC07EA1FDA78E5ACD
-:10E47000B63ED677D65A483DD82F6B1B2CD5B1EC7B
-:10E480009770416CFB85D671DFCD91680FACCC03E2
-:10E490007B86D4E9E36AA7B25F1E1EF5DDFA495711
-:10E4A0008C3A3B7E52846FB9DD32A4485B0821D997
-:10E4B000B32527869DA69C18D65F4EDC38EA5BF80C
-:10E4C00049E102965F2DE86BABEAC578726735C10A
-:10E4D000F8636768656A09AD3FD1602112AD5FFFDF
-:10E4E000328B0B6F2827013847BB219B603DE465C9
-:10E4F00074304376FE08E2E03D55D47F52216EF73A
-:10E50000E35A80EDBA8499B73928BDD4962B04FC20
-:10E51000A619F214FC4E4863F9A1B54EF2A338F0E7
-:10E52000ABA62A64E519C4AD13E562897224E54FF0
-:10E530003519F876A078B439FE4CE417BC802F73F7
-:10E540001CFA4CE3CFDB055D7DFBF833F2DF970F60
-:10E5500034CD8278EEA9E871C12815F599594F9903
-:10E56000F958D0D340F4E7043B69A2AECECFE186A0
-:10E57000F93EB513ECA48951BAE8AD9D94142BFF74
-:10E580004A9409CD7F78457F1E2F41E9C6F1129A42
-:10E5900077E1F3BB206F00D6A778519E3E5849E53E
-:10E5A000708CF9ED6E597608E4E7AE96662C2F5024
-:10E5B000FAE414DAFFE916FF2180DBCE96762C9F71
-:10E5C0006CE9C2F69E968D58DED112C0726DCB0EEC
-:10E5D0002C6F6BE9C6F2C17CF69D294A10C7B9E0E1
-:10E5E000241D5F474753FBE87774F83EEF43BFA114
-:10E5F0007D72B8DDD07ECEE12E43BD2CB4D1D0DF0C
-:10E600003D2560686F2AA83B067CE92ADD6178EE2B
-:10E610002CEE36BC77BA7EC1D9EE976B7F04B6C9B3
-:10E6200049329CBBA0AFC8706E88F2F190662A5E3A
-:10E6300069FDFE441EE7E866FBE49924F283740951
-:10E64000A964601FF426B23CC8D62CF67EEB8DACD4
-:10E650007E7F0EDB3F12799AB23D42D744CA88EEE4
-:10E66000E7DF9FC8CF2915B0BCC8DCE200442448CE
-:10E670002E24A8C17E4829DB2713FBDEAD3CEE70BB
-:10E68000BF95EC94A83DD9AAB0F9B76A24B082F638
-:10E690006B2D66F57BAA48C002F3D7A814CFD0ED46
-:10E6A0007337EFFB4A2A89EE9793D11AEED7C87CCD
-:10E6B0009F3DB2EFED7897E0BE3E87D7CA848F3199
-:10E6C0008F36B9B94F02FE1AD2DCD70BF3BBFF1657
-:10E6D0009B1ACB1FEABDE58B2CE09B4D377E910545
-:10E6E000CCBE29923FD3E7D0E7CFE472B86C6ACEB4
-:10E6F000C7FC854DF52E2F87B3C5D48EF90C9FD757
-:10E70000F3FB0988827ED1307714AE01913F22431A
-:10E71000DE1D5DFF88E8F9D3FF34BF6653F37296C0
-:10E720005F934D787ECD4CF427051E364139AEFF00
-:10E73000B9DEEF3ABFE6947935A63C0703FD42DD2A
-:10E740006FA66F15F112C7E95BBA99E5456499E8C0
-:10E7500046E45D08BA14F919225F43E46FD8785E85
-:10E7600007FD2CCF6B8E4D5FB63DC403E7DE644BD7
-:10E77000BC774BDEA9F3089A3DF95C392C1BC7C660
-:10E7800065F903FF334AFB85A72C3A6E9E47BB51C0
-:10E790005F17E556F875321DC21BAE027BB5A85C4B
-:10E7A0006B85F37C29A504CFE994964B58161D621E
-:10E7B000F5DB3C327EAFCDC3E24DA27EB1A63D0774
-:10E7C000EF2799DEBB38F29E15FBFDDE63E1A5C2A3
-:10E7D000E6CDF3906772FA5E3D5966F9D155129312
-:10E7E0001BB0A13A89EB430ABF8B89FB92025DDC27
-:10E7F000F5C71C5BB7B7B0FC3E910FFDB79765CC72
-:10E80000877696FBA6C1D9B3B2502808FBEBA5DBEF
-:10E81000883B4585F98535E0C7153977EF817C88D8
-:10E82000272E647BB6171F62F6C28FCBAFC6FB469E
-:10E830005C5FCB188F754F49F406E0433556A6FF51
-:10E84000453E74B9D15EA835D90B179FE2FE8F14EF
-:10E85000D2E7073DF988C7148FE5F7800C24BFA3E2
-:10E86000F78030F950CAC77496BB1D10BF2E3A64AA
-:10E87000C1E39EF2364DC6F3B19D2CCFE389906F74
-:10E88000D0F3A82F723886B89CF81BCF93ECE172B6
-:10E89000E2752E270E839CA0E52B3C4FF210CF9300
-:10E8A000349F97D8D152FD92DEDE319745927F1684
-:10E8B000E6416D56089EBF1BE0BE8FA2001DC790AB
-:10E8C000C7B802E9676FF2DD15401CEB350BDA952E
-:10E8D0005D5348562CFFAEEBC2CA41F30F3B5BE6DB
-:10E8E000BCD43688DFE8B4517F26D6FB1E71AEABB0
-:10E8F0000BCF5BA4955B08E45565D9FBD8FE43AF0D
-:10E9000003E97988D78EFBFB649E93BCABCB53B9EC
-:10E91000DDD7350BE6FFE03605CFE7887113BD7410
-:10E920003E3A3A499BB22713E6DF39359809F64C4F
-:10E93000D7F87D1B0B205FE4A04C800CCCF3B21603
-:10E94000717F96AF2B4DD1A45879EA03ADEB038FBD
-:10E9500064B867C20CFF01ED0EC80818FCBC95B383
-:10E960002846FEE269CC13EDDB6F765C3B1BCF4D96
-:10E970009EE6FD17099C0EB3161207FADD408F8341
-:10E98000E0D9650D21DED62EB454C73A5F5B54C47E
-:10E99000F0BDB6F453B48B4971EC7924959BE9959D
-:10E9A000CDE70E858E4FDFEB2A8D3DFEE51C6F9483
-:10E9B000AE5F0379D5556D41BB22092E62C0FC1CA8
-:10E9C0006A074948EF28973E2BB5313BC1242FFAFF
-:10E9D0007DBF54474FF9FDE5D0F9454E437CFF44D8
-:10E9E000F6ECA4600C3C8B52C051C8A1FE70247898
-:10E9F000FEB58BC39114C7E6EB28BE56887855DD6B
-:10EA000029CEEBCD2E2A8B714E6C003C98E9E18E1D
-:10EA1000853E5C1779EE35A282BE2CA5FCA88B43FF
-:10EA20000C043F33BC167EC7F032B7FFA888C74737
-:10EA30004E739DA7DD8FDA456E9D5D0C87A2155A3A
-:10EA40009FCAEB3FF64BE17BA85C9576FD09ED9EF6
-:10EA5000A9BCFC3194543FEE9282EFBE415F9E22EE
-:10EA6000A93980B4594F8F820819B9555A66B07FB9
-:10EA70003A24EFE167302ED4970AFDA6933A852118
-:10EA80003980EBFA93146E05857529D15641D94822
-:10EA9000BA6CF05E63CF9F0EC3771A7B1C4119825C
-:10EAA000933BADC7F471A36BF4E747F2E0168D6EAC
-:10EAB0005B1E9DCF921DC67DD20612C2F196761BBB
-:10EAC0009F9BCF8F4832050C5C4E10C97F9D82F909
-:10EAD000BDC4C1DAE3478BF3E87D85FAFBCCEA39A4
-:10EAE000BCEAEDCE20DC2F4402C6798A7B739EA758
-:10EAF00072CC3E01CFC33C0C74FC91DBEEB7507B73
-:10EB00003923A5AE11E07115516DAC647683589729
-:10EB1000B887668173B60DE0BBA0DDBC0ECD06F3F1
-:10EB2000F959D7E0EB1378FF4711C175DC5EA46299
-:10EB3000B934BE66BF06CDA5A15CFD7D104D5C3F1E
-:10EB40009065A906FE7D51D023D1E4D3597F7FB8CB
-:10EB500016609C4CC075603A35C6C976C121D77421
-:10EB600084DFCB7AF811A5AE04C615EBF96759E836
-:10EB70008120ECAB26B27BA0DE4DA97B03FAE71C1B
-:10EB80000EBF2FD1A913A75A08EBFC78E747AFC8EF
-:10EB9000F9D1F51112BE1BF2A3EB77CAEE0E58CFD6
-:10EBA000CEE70E03BD0FB42E911F4BE901E146E7FE
-:10EBB000F521E837F3BC8EDE407E0A76C974B9D8F9
-:10EBC00010477986C3F19E62DFC7F05EE94BD92E0C
-:10EBD000BC7F27BF7BDF503A8FBEEB25CCAB4D937C
-:10EBE0004915C04FE4237CEA54D0CF4E4BF0CB2ED6
-:10EBF0005AEFBB8A78B7C034BCCBBC402A724EB146
-:10EC0000B783D24DC6F5B20FE4C9DFAF5B90BC80CD
-:10EC10009619890B9347D0F28238E277D0F13224EB
-:10EC20008BAF1B8350F3932FA1F3FC491C9D27ADA1
-:10EC3000E7DD90101C41F9ED8F3662077A4D4BA845
-:10EC40005B371DBE932CE37C8E503B51A172ACE22E
-:10EC5000F2CF26DAE9F7867EED9C00F3C96A9E467C
-:10EC6000DEA5A03C5CC4F8E4E8C35F4E8473E0F228
-:10EC7000374E2F9E33E7F4973682C1C38CEFDD1CED
-:10EC80001E6FC6337FA731DD762BC4DB3FE6FE0F58
-:10EC9000D13CE82F5CC7FD8537E3991FF466A18856
-:10ECA0002F05D3F5F66DA3434BBA0C9C076A274199
-:10ECB000BEF3676E2D2919FA111FF2ED75DC6FFE98
-:10ECC00098906AA0F3EBD64C1B9242DF4F6F6570B1
-:10ECD00030CF6FEC68A69F1B4E5282D6C5CF1A94D8
-:10ECE000A00DE477C3499BE1F9DFA91DEDD79D573E
-:10ECF000FFC98787A6C3FCAE24E155D0FFCAEB123B
-:10ED000058E09EF36B0F9FC74070694C568842E1F4
-:10ED1000D12811DF60FD9EF9B71C13BEB34733FB4A
-:10ED2000257D5AECF55DC4D7376D75CD2F81CE1A90
-:10ED30004356B4E5AFFB43C590C1ECE7C693E791FA
-:10ED4000802EFED7A884111E8D27CFC7E7D3561F6C
-:10ED5000B301DDC3382A7D7E9D431B02F1DA81E0D9
-:10ED6000BC9BDB418D2793893F55FF9CF17774FC59
-:10ED7000346CFF2D87DB6FF75BAA63E577358F6611
-:10ED800070199DAEF8201F684C90689B637C57F407
-:10ED9000CB4831EE5F98E7D55319BE12E67D4E158C
-:10EDA000D1627D6F3187A3986F4F4A78910FE9B395
-:10EDB000AF10EE9988D4DD7DB9FA7B24B672FCF5EC
-:10EDC000FC309C0BE37F7C61EC733B02CF9394653A
-:10EDD000682FBF9052F734C8B77997D10AA58F2111
-:10EDE000F38216763EC53F28BEA370964960E26066
-:10EDF00070B661BB18EFA317393F523F1CF2D4AF76
-:10EE0000E2F2FFAA6D4B30EF49C8A98F36CA28A796
-:10EE10003E42DD42CB8084F6EBFC3A0A6B2A571661
-:10EE20006D9FB60FD4C15599D4064D61CF6F86B290
-:10EE3000CD6A88F78BEF2D38CCECB7859D463D57D2
-:10EE40004F3A3F01FBE0A317993CA0FC6D0379BC4E
-:10EE5000E82EE338F5DB2EFA00E6576FF2CB33B835
-:10EE60007E36DB799B47F3F8FE2432E94CFCF24610
-:10EE7000A2ED188D7AC127C33CCA14E33D5BA24CB6
-:10EE80002F61F05FBEFD84CDA50E3CEE112A470A2E
-:10EE9000E8B8C7A83F0EE51F476BBF1F4DF170FCD8
-:10EEA0002083CB81D1754FC1F78E1F64EBFFB4E196
-:10EEB000D345704F0C99C3EC8638387C407F8D9BCE
-:10EEC0006B0FB4D2F5AEA662CA01E782E2983D228A
-:10EED000EC3059BE5676D1F6C9FF58980CEB4C7BF6
-:10EEE000E807D5305EFA43091AC0ADA3421B0FF202
-:10EEF000BEA3D6E985F32A9B291996D3F7ED741C96
-:10EF0000D02781DF4EDE03DB9105DDEB2AE1DE1742
-:10EF1000F7AEDEE030BAAE760BBB27A3FD7CE26D28
-:10EF200025D1EF35EDAA7D0CE6953B9BEA0709CE8E
-:10EF3000D16BE3DDBAF109B7AF1A394E8E3F3BEA28
-:10EF40008EF3E05CC27E19CDC74F1BF2D1AF1F4DCF
-:10EF5000183D89FC7BF836D891027EC7A8BE22BA3C
-:10EF60003CB5D1DD52D04AD7B5B4E731BC8FA361EF
-:10EF70006530632EE8DB0715A647F9FCD2FE9855ED
-:10EF8000A9BAA2FA77AEE4463B52D8C99713F15317
-:10EF90008CF1C2399C0F2EE7F6F1DC0406E7F9C4C8
-:10EFA0009B0BEF5D61272E0B85D9DC69DD65CB40BE
-:10EFB000EF2EB126837D036B898577519AED20C1B1
-:10EFC000878D0F24FA21EEFAB1D45708831CB13291
-:10EFD0003EEB7B362EB025AFFF38D631CCAF6F2C51
-:10EFE000E4765D01D1E0FC40E3EE51781E2C2E9ECC
-:10EFF000E27102CA3F3BE0F579D0FF74DDD73CE314
-:10F0000008E2B930715F999BF813E9779A760FD9C6
-:10F01000027646DA086DFC723ADEC7D6702ECA0B4D
-:10F020002ADF24AA5B73C7ACB944A17CD53894DA33
-:10F030005DB47ED14377B37A7E789185D6AF7DE893
-:10F04000D14B144A9F8DA3C3EF43FD96879E66F56F
-:10F0500009E14532AD6F7C683FEB0F7BD894B0B6C9
-:10F060003F74E012F0FF8F2433FB8178C35702FD19
-:10F07000343E3DCAD2A15BEFBA314C3E1E71B07E28
-:10F0800047F2C84F6701BC3DE1C259BA7DB9EBC731
-:10F09000083B96D971629DE23D92197BFCB1639861
-:10F0A0001EBD661AEB7741026977B0F3757EB0C773
-:10F0B000F6EE1A8570491993C2E145C7298D8E2352
-:10F0C000E028C613DF5D0C7A1DE4BE95CA7D9D9CC9
-:10F0D0003997E38D7EA70DBF53AC8D877BAC1A6744
-:10F0E000658F07BC517C291C5F8A1D2F57DBCCE63E
-:10F0F00047C74D2E413D3311E2CA7BBFA6FDF3A2A7
-:10F10000F336D3C78C314C1E5DD3CACEF7F7258FAB
-:10F11000403ABA2081D98BA494C28FCAB38D1C6E99
-:10F12000EBC624333F32828721128EDFCAE197CDAE
-:10F13000FA9FE97AE7F0799CEDF5EAF0A4417C6565
-:10F14000EFCE22C4D3C6081DAC338C736485E9BDF1
-:10F1500072CA78308F9411F8DE6A07B1E373B22572
-:10F16000F25E1E7DEF82697D13811F96727B98F897
-:10F17000CFC7BC86062E2D96B6876C10975EDACD6B
-:10F18000E2E4A480AE0FE863564D295F9F9BAFCFAA
-:10F19000CDD61730D02739D4973B3BB13FDD46E081
-:10F1A0001E19AF78021FCFC0CFB1C603BE18081F0B
-:10F1B0001D671B1F629E267846E06C9A9F8027F091
-:10F1C00031BE576CE42731CF5BC644E2B1467ECEF8
-:10F1D000FB96DFAB60EF2DBD91E211EC1FD548CF60
-:10F1E0004B7BF22CF38BA3EFB577AFF0819C4F9064
-:10F1F000541607EFA9F583FE6BDA558171AAA54F66
-:10F200003DFCA49FBEBFF8D10D2E48AEFA48E9CA16
-:10F21000003BB861FB2A17DC33F7A1E27781FCFCE5
-:10F220002820C7CC5B7F9BCB01617735727D73E46F
-:10F23000B7B7CD04787CB1DD8AE70C9B76C405E3D3
-:10F24000306E720DDA63B4FE36ABAFFE04FCD8A6A6
-:10F250009D46FB69F16F3664A8484FFE6116DC04D9
-:10F260000B0E83CDB0C66D56DC4F693C247BE9673D
-:10F270004813E9BB15E6677E1FE67192E2BDA95B04
-:10F28000BE0AF2FBCCED5492A03DD6D4731BDA69D2
-:10F290004D3D177E00764593299FA27E003BECC52D
-:10F2A00031DC0EE3F7A40BF890403ADA37AD0FFEED
-:10F2B000B2E46D3AAF63DBFEE2928AF57A7325E23F
-:10F2C000E9D3EE059B9E5607D6AF1F837D10A77F1F
-:10F2D0008FE157DD29B18DA15DAC6CB0065D101FCB
-:10F2E00068D86CF5520D4C1A1EDEFAC0AFC1BF7C57
-:10F2F0002DCE0BA9A64B1E7EFE9573697DC963D6E4
-:10F30000B41A367D27EC730B3C41CE06D829022F68
-:10F310008B7FFFBC0DE290F01CEC5E819F258FF58A
-:10F32000DAE09C9F198ED3BA7B6D980F6BC653F7AA
-:10F33000DB33C004697DF04B1BD0F747BB25BCF71E
-:10F34000DEFC7EFDE6E75D40870027F04305BE2238
-:10F35000F8EB87B7E0CCA74BB11FC6434E85BFC7BC
-:10F3600001476548E78F3C0D7194D7E3BC0087FAED
-:10F3700047AE75C17A3E5096317ABF6F5506DC971D
-:10F38000576FF567B8B164CFEBEFBF1EE9F0EA83C2
-:10F39000D767B07B24B42C768FA63F0BD6F9B37B0E
-:10F3A0002FC1752E22754887F5F7B1F8C6E70AA96F
-:10F3B0007E2C06BFCC2D66FCF2C19638480E221F6B
-:10F3C000C03E02EC9BBC28E3B9FB7EF72291E558D6
-:10F3D000FF9CC717C61547EEEDB3837DD7C47B35B9
-:10F3E0006D5B1D023C1DC9D186403C9FC2C1CFE16F
-:10F3F00026C1BDEFF2C1E943189E880AFB21F81E21
-:10F40000B5C7A7C173E81FB26A8E12C37BFC7E1B0F
-:10F41000F67D11DFA0F38E87FDF40F32585E9E79E2
-:10F420007D1DC5421E9010D1D3D940FCBF6D0DD2B9
-:10F43000D7678718FF34066AABB13D640D0E81F6BD
-:10F4400040EF6C09E5439C61FF3C421FDBAC9CBF75
-:10F450008DED749E8AA487EF6E09EFD314F4B2E8A1
-:10F46000AE38C37E7D947E8CF745097E157ED6D559
-:10F470005C1E98D76D960F97169BFE8EC2BDE9A7AE
-:10F4800015FF6EB0061EF835F033E55FBF0AFC6C61
-:10F49000C5F8C0D1DF3DF7CA1594EE8F760B3E3626
-:10F4A000CA5B331FD73F5E4662F1F151A797C4E4B0
-:10F4B00063FA3C261F3BD9B9E9FF57F2F6EA01E4AB
-:10F4C000ADBFD8286F3F27C549E711D0334BF0BEF9
-:10F4D00057337C85DF6B96A399C56A4C394A7F0EFA
-:10F4E000111D3C051C057D2E7E68297E2742C782A2
-:10F4F0004E051D47E8D4BC6E233CCDED5530775DFD
-:10F50000FE837525F563C0CE7D560E6CA1533B4E30
-:10F51000E7722B85FFF1DFE561BED12AEE071C778C
-:10F52000F7B9207F6C15F73BFA202E99147DDEE7A2
-:10F5300060F6D2715F9F2B596737BDBD4B76819DB9
-:10F54000170E90EA58F1242AB1711E6132503BDB4C
-:10F55000173BCEE3A1C779BC73BAECCC6D8638708B
-:10F5600017BBD77FE18ACB5CB02F707CD7883B80FC
-:10F57000FF7EF66799DDEBE9D714C89358C0404089
-:10F580003E24FEBBA7D0752ED8B504F31BCC7194D6
-:10F5900045CE6DB8BFF039B9194B73FC6431C4590D
-:10F5A00080DEEF353DDF7511D2D762137DD5017D49
-:10F5B00065F5A7AF1704BF8E27E3F5E7CF9673B9BC
-:10F5C000375D2EBE03EC99E3D4CFC75C02B9F800D7
-:10F5D000E8DDCFC1EF07C6F0A723DD2EA9FBD0C61B
-:10F5E000EF71467A177468F6F7CDE5B127FE3EE96C
-:10F5F00026DAA5E1C9374AEEA1E5B1275F2B7C06E3
-:10F60000EA4FBD9AFB06E9DF7FDAEEAFD0BF39BE25
-:10F610003B0EE7737CF79F726F82FAD37198877500
-:10F620007C651CE645F9772706E03CDFF11C16B740
-:10F630006B7DF6CB12CCBF206D88C793C536668F25
-:10F64000ECFA9FB7207FFAD35D712AC4299A7627F6
-:10F65000A0DFDEF4B403F35E8E3FFBE5247D9CE97E
-:10F660003F5D4FA38DC5338F2792398F033D2733DD
-:10F67000FFAEE999C95B215F6E694FAF0DF607A632
-:10F68000FDF15F2520978E3FCEEC0FEACFDF0F37DD
-:10F690001DCA639BEEB652787F0C3622F5C3378DB8
-:10F6A000EDBE14FCF0FE706170384EE100EBA2700C
-:10F6B000A907793A103C868EB521FD7FFFE0F1095C
-:10F6C000FA170DBBCE413E8AC245D2D8F3C4805D45
-:10F6D000C2F5B3E7BBBF2C017BEA68F70AB40B4E57
-:10F6E000B5EEC963BFAF74F06DD72D054F67DD73FD
-:10F6F000BEB7F866F4FF16D757663EE84FE74FDD12
-:10F7000080F54712BD38DFD3E4FFE6FFDFF0FEB837
-:10F7100084FBF2A7C2FB2FFFD7E2FDCF1CEF896E5F
-:10F72000C82F3BFEECBF72896EFDA75AF793FF4BC3
-:10F73000D71DB18F649F1DAEB8EF24C1109C5F5FD1
-:10F7400035809DF2EE5849E4EFA01F22F277E4B431
-:10F75000C56867C8691D6837AC22EC1E64BF6AE1E2
-:10F76000F7B1B1BCEFF66C6F00E3A28AAF7E33ADA8
-:10F770005B8737783B7004A37F2667D454439CA5EE
-:10F7800075059D171DA735DDE26E55E19A764B3064
-:10F79000AE04CBB7A15C9DF1C3FDF05DC569BCAF04
-:10F7A000D669F237E20B6CC6BC62B2C70DFBD50E50
-:10F7B000AF0277B95353D678BF6DEF58B6AF1D4F30
-:10F7C0000298B779A6704A2D191C4E66F808B8F54C
-:10F7D0008313F747C57DFC4A5A4708F85021D49F48
-:10F7E00064EB413F14FE8E14ECD7589316793BD846
-:10F7F0007E8A1AB9C71FF220B8BF19B96756B5A0DB
-:10F800005F2AE0AC1B0FD76F86F399C257E0C54162
-:10F8100066219E1DD94E6F80CE7F95CAE0BE8AC2FA
-:10F820001DEE1717F0157033E3E17DA0519D1D1FEC
-:10F830002D8DF93AFE4AE2817D96E9F294B01FECF3
-:10F84000E5F204B4978F49242851FFED5845462529
-:10F85000F815C7726C0A9453FBE89A74F3BDE0A4E0
-:10F860003DF237F4A05E41920DF5633985F8FE3420
-:10F870007B96E1BD0390B74DFDF66359E576DC0F4D
-:10F8800075E719DE9B99E0DA02ED07208F1BBF3F79
-:10F8900003FD9B1F641619C699F9CEB17BAFA2E593
-:10F8A0004EEE57F74DB5623CFED89FE755021C2F30
-:10F8B00054C71BFA1F24EE74202ABABE2A58DF450B
-:10F8C0009EC986EF36BCBDA710E2103FF256189EC7
-:10F8D0005F5C7EA1611C9F3D1C04F2AED56A0DCF1A
-:10F8E0001B9ABF204A2A21E7357F4D9489D47C0F8B
-:10F8F000761BC699B87FA7A1BF37E49E0626E3848E
-:10F90000C3DEE7A014F9ECB654BBDF42CBB16F57AE
-:10F91000CAB0EF59F65E5D2B84A1CF3B463C400751
-:10F92000E79078DC0F1C28EFFD4B4BA00ED6F90BAF
-:10F9300039E081327ED8A21258D747999D326C4B5C
-:10F94000DF23D55D5E0276D6678156A85FF075B776
-:10F950000CFE64EB0E19CFD74D976B12FE0AF2B86E
-:10F960005BC21CFF06A705E3F04753BA4BAED5D1E7
-:10F970009DC8DB31F371D1C48A25307E5BA6D6D514
-:10F980000BF2B4F2EF57CA31CEBB12B7F15EBAA296
-:10F9900089BEDB619F5EE425C54F935972FB0FACB6
-:10F9A000182FB9D5E27570A1807AD73DC3BA19F87E
-:10F9B000DD3A8EC98DF8BF1015E241F1A975329C70
-:10F9C000B323774898D722BEB7A09CE5DBDF5E2241
-:10F9D000EE3771A7FF642CBC9FC8F205209606EF96
-:10F9E000D558D04E711DF6EE83FBC8EEF41C728321
-:10F9F00078E8A979C70FFB223D874353258A9721D1
-:10FA00009D15270A587F02F1CD1E4F55C258D46F5D
-:10FA1000E59887B39CE7CFF44EFD8D07F4C7F2A2BB
-:10FA2000D14306CB2F779D9488AACB33B08E5371E8
-:10FA30005E2E258CE7C55C27156C27E1F1CC1FE411
-:10FA4000E3BBE6A9AF5E0BF3D86FC57C67A2684B3A
-:10FA5000601D1DA3DF543B701D84FF5D9130FEDDF2
-:10FA60003CC84FC20BD19470E64F629CC33BB2A31B
-:10FA70002C19FCF2D40A2F9E1B4C7D588E9C9B05A2
-:10FA800038DC0EFFC373B597BE5A45C7DD01B2928D
-:10FA9000B50709A5EF0E9B68A7A2C6C3EF3DC4F644
-:10FAA0004B2F831843BC6CEC3F2E3FD25FB36746AD
-:10FAB000C7FF43C9A5AFB6C584671CEAEB8E1956CC
-:10FAC000CC9F38355C134E01571783EBD7542B640A
-:10FAD00044E38BEF496A2ED0DB9D705C80FAD1BF86
-:10FAE0004CAE0B96A4C3FC8363E1F97C9736642A81
-:10FAF000A5BF1E9B967B23C6491C98FF55FBF3A30D
-:10FB00001BE1C8986BE6114F1BD08DA2254C8038A5
-:10FB100095FB0B940B22CF2D0A474ACFF49BB75B82
-:10FB2000A2759013AE285C35B82BB84307673BAD80
-:10FB3000D772B8FECF23F597B5017E17DA912EAEB6
-:10FB4000E53CD5964CBA20CFEE84FB814B811E4E0E
-:10FB5000ECB062326B0F34821EF5D8D9DFF5490B59
-:10FB600067C2DF71197BD082F1BD37297D68401FE4
-:10FB7000C1F1087731DE8929AFA6C0F98913694A36
-:10FB80000AC06771D88670FB894282707F6A4FDA3B
-:10FB9000C26915C81F2AB677F371264FD4FE518269
-:10FBA0007A9D9FFFD5CE95E1BED481F065DECF87EB
-:10FBB000F8F0B92903D3415B851DEF1F6A2A5F5115
-:10FBC0000C7A62797221E663355549A8879B9A3F82
-:10FBD00043B88BF1959332517579533D104D4CD705
-:10FBE000DD237FD286ED0DCD27509ED3E9E401DFE2
-:10FBF0001CE3FB9D5D56F2D35A5A36FC5BFE69ADA1
-:10FC000013F72DDB419F34903DB6E53A7948BA3F72
-:10FC100089C8FF71147777D6BC180F72B656725F19
-:10FC200002970ECCEADE7B19ECE7D73ADC97C0FEF0
-:10FC30007F8EF71156CF715F02FBFD631F4D9A0354
-:10FC4000FBFBB559EE0DF09741AFF016CDC1F63C78
-:10FC5000F7CB509F316E06AB27323A4879347F8E0E
-:10FC60001FF5B913E1F2697B4260B07B48AE6E7E4E
-:10FC7000C600977EEDB284795198B841E9E79F6B51
-:10FC800086B17B710B4298A735721C8BAF67A4B00D
-:10FC90003FC92BF277D346100DF657D39E72B07B37
-:10FCA0005BDF0BE502FCAE7ECA1184B8E4D2FB9E9A
-:10FCB000B3813E9A2FAB85C057B3CBEAC68C2B835A
-:10FCC000F84908EB5737EFC679754C70F3FB72FBB8
-:10FCD0008A217E55CFF39EEB4DF9BF8B9D7B311E64
-:10FCE000B7789B31EEB68484DF023E6DF8DDE079B3
-:10FCF000BFEF58D83C140E8FF972E84A1B9BD7F916
-:10FD0000E3E8F797A6F462DEB1E20E65D4217C1B2E
-:10FD10003CE8AF64C6E3B99A5B87BE5E12EBBE985F
-:10FD2000EE16AAFF29CB3DDEB2134BE77882EB1922
-:10FD3000A2846D5E3A4E2397CB9342EFD8F4F983B9
-:10FD400073395C9376B2FD6F735EEC5CD05700172D
-:10FD5000BECFBC74D60B53002F029F1724906ECCDD
-:10FD60005F4D215E8E172FE045C03FBADF4CDFCBE1
-:10FD70008B451702FE84E5DBC53379D1F78403EDAB
-:10FD80002BF3FCAFE3FA57ACA39DD7079A7F3BD781
-:10FD9000B7677BFEED5CAE9BD721F8583C177C6CB7
-:10FDA0005EB798F799D359C8763A7426E44C23A9DC
-:10FDB000F3605C96CB150167314F01AF9E01F25D98
-:10FDC00095E63F18D6A3842AF1B0FC7650A420C74C
-:10FDD000BA2FC4942BA57917F63BD3F508793BD0FD
-:10FDE000BA849C35AF4FC85BB14E2177C57AA75214
-:10FDF0004182F210EE7E90C07FA833D8C3157062A6
-:10FE000041BF0F64FFB9A13EDD7DA3A1FF0F3257B3
-:10FE100018DA2F54D718DA2FF2AC33D47FE4FD95DB
-:10FE2000C9AEDF6C68AFD51E34B44F0987A681DD3B
-:10FE3000FDB7966ACCE73EFFC3BEE7A01E6C7163B8
-:10FE40007D4F4B26967B5B54E4EF7D2D1E2CF7B740
-:10FE500078F1F97FB59463F9428B8665A8C587A5CB
-:10FE6000592ECCFCFD650AD8EDE5A12EF407C68F0E
-:10FE7000AFFB0CE4E1014BA03591C2E99C37997DC1
-:10FE80004E02667DFCE55B37815E77B37BE8DA7A0C
-:10FE9000274B6A0C7BCE45F59DA6A317574D98C0FE
-:10FEA000FEB28BC4CEBBFC6A1CCBF7C17C3D4A9B27
-:10FEB00073ECEC5EDB397324CC4F9C43D879055A44
-:10FEC00006EB68FB4C85F841FFD73A15DC8F22FC26
-:10FED000FCF0256C9A70BFBA3F0EF4775A2A9E57F1
-:10FEE0009A0D0FE97C654DC6BCD64BCAFF82F980DE
-:10FEF0005738D9DFCDBA7CFFCA7FDE44DB499BBFD0
-:10FF00008C9D8710F786BC6E3913BBE12B386300DC
-:10FF100079A09297FDDD9464C5ABF70744F9D771DA
-:10FF2000CC1F98D9CACF0B1C2468C7097EA4EB6BE1
-:10FF300087F90BBEA8752BC1512ED0F7EBA641FF58
-:10FF4000FF0B270420E00080000000001F8B08004A
-:10FF500000000000000BB55A0B74146596BED5D591
-:10FF6000AF904EE88400411E76886020AF4E271D7A
-:10FF7000C26B2812C01762A3B2038A52A0189E490E
-:10FF80000CCC8AA37BBAB11904D6B39B193DAEAE93
-:10FF9000E869705076D6738890B8194D980695C761
-:10FFA000ACA3514141B3D820F258133A121470381F
-:10FFB00087BDF7FE5574572701F4ACC9C9B9F9AB31
-:10FFC000FEFAFFFFBEEFFDAA961D70B98300505DDB
-:10FFD000B63A0F0A904E918EDA902E5BF50398FB9D
-:10FFE000E178D5393017034C95DF08A696009C3D83
-:10FFF000046E1BCE1FD3AE9EDAE1C27F2E5D9660EB
-:020000021000EC
-:1000000000C04A3BFE8FE3B2CEBA8ABEF86F51B849
-:100010001ECC740D7F2EE35FF1BE2630E7C4C6E32D
-:100020002ED4BF4BF376FA55305B009AFDB3998618
-:10003000FD8BC03C0260B7BF86C7EFF957F1788FE0
-:100040003FC0749F7F1DD3BFFAEBF8FE07FE177801
-:10005000FCA13FC4B4D5BF95AF37B89D00FD01CE1C
-:10006000B5560C54F3F06834F6E286F6C999BE141E
-:10007000A4664167D3813C48ED60C9C8403A5B62E1
-:1000800079E0F500A4330DAB787F59E63B2C0FFCEB
-:10009000F1D991DF59A0FD64F4334329C0BD20F8A4
-:1000A0009F55F6DF17A5541AA83912CAEBBECC3EED
-:1000B000B04102B81F02F9F391CEAEACB38C97E811
-:1000C000FE14E709948714F8C274391765423F9308
-:1000D000BA533C289CD0E526032C71ACB1C2700009
-:1000E00094D2B108CAD704125CCE02580C612BD04E
-:1000F000FD3F5A8E45E2E4BC14200BB2F1FC6F5870
-:1001000078BE7E1DE8F9B875E50A19CAD2496E2E87
-:1001100096DB7288F07A36F951778D83F6ABB3D2DD
-:100120003A89FB2E71BC67C5410FFBB6F2F3D7DAF3
-:1001300057D75315C07C9ABF2653A9DB85EB2EEF0A
-:10014000D3F6A06CEA411E4E73E795F5500EFF32D0
-:100150004AE8554E9962571D64A70E30A11EA3218F
-:100160003964C3751665D5A5D2BA6898A980D71722
-:10017000B7C8AC0F302BE641A8B74A4D6FED10FE63
-:100180008CF45239A1723AA0FE166D34F2B3C471E8
-:100190009CE5FE3D34F7C86F153CF39D9CDA9DDF6E
-:1001A000AA09B79CA4F5AA34B9F1753CD7AA366957
-:1001B000DB7B71F356B853324E249363C118920B14
-:1001C000F2E10E93BF1D90D9DF7AB38F337E607B4F
-:1001D0003FEF876DEFA1FD9FB984176E0078D23D88
-:1001E000ED85C0845F4E6FFD8A7DEBDDE44F6827AF
-:1001F000E447BA1ED7A20D019E7B6DB93D1440792C
-:1002000046BD4E33ED1F9542C154D2CB4570AF462B
-:10021000794F6EDE7B88FC64B2DD1126B92113EDC7
-:10022000F17A9DD42E2E4F3C1E0AA6E0FCF16D0102
-:1002300099DC76EC0135E8C0F1980F14D434C699F6
-:10024000F77C32E97DBBBF89E550EFAF671AF39FBA
-:100250009BD8CF60105ECBBE7E3F8387ED268A6B36
-:100260002BB43305D3A0CE8401ABCB314D4E413EF0
-:10027000BAC2E0A6EB45075C413A57719B22A7E260
-:10028000B9BCC7D5209D7B2DAA41B1519C0CC87D1E
-:10029000F1BACD0C611BC6115BA6099438B98E3D2D
-:1002A000170A521CD4E35A7392B0E74997EA658A59
-:1002B0005B4EABBA7513CA13DE4E726F71753FF7A2
-:1002C0003B6E13CBFDEB74DF3B6EA4E0708DF4E569
-:1002D00093FDB4BFF612D94F43B2DB86CF25C66972
-:1002E0003D2EEAEBE872D3E558EDECE2B8BF6C5571
-:1002F00017C7BDC47DAB4DA0D6A3DC3D15AEE25AF9
-:100300005CA77D35CC9B89E33A0BD2BCEEF33FF181
-:10031000947F48F632559ED0AAD0B99CA6ABDA7528
-:10032000F5AAEF78FF5EEF6BFB57B7789D0B1CB11A
-:10033000EB8E2249C479303B4FD863FABC5EBD4F87
-:10034000EC9C6DC85B932EA886BC3519236DFCFD13
-:100350000AFBA386F154E7E386F9B764AE36DCBF47
-:10036000CDB5DE70FF8E9CDF1BC677BA5F34CCBF85
-:10037000AB6C93E1FE4CE53F0CF767C8A048E8730F
-:10038000F952C8427E3607EA99CE8556A60F422713
-:1003900053152D89E80270337D187C4C977B54B936
-:1003A00008ED266AE91C407EDFF1D6DFF3C82E3A5D
-:1003B0007E35DE99E58AE5653D4FFFD47CDCC78A52
-:1003C0007AEAC11E061409BBD5E37DAFFA4988F766
-:1003D000D1228C2778CE686332C799684A9F9024CF
-:1003E000C5E2095AA489F2B1EEB77A7C299EEBFEE8
-:1003F0006805F9D107328C70758F3753CD581A784C
-:10040000E8BA3BE781FCD8FE41132C223BDB8AF49F
-:100410004DE4A3EFDC88D915C74F01F181F6367999
-:10042000CE1488E0F5194E5042387F861D322E508A
-:100430002CBCD495370B03C48C0BA828B4E71FD36E
-:1004400095429277E0E909692772B5B87423EAEF1B
-:10045000A889F981C5526804CAA3A9418CF317A6DB
-:10046000317FF74398F5F800442CC4FF3C008ED34D
-:10047000F3C1C5F42150589FB8727201C6A7850D0B
-:1004800066CF06E4B330BD7338F967FED8C3E9120E
-:100490009E0B4B3B85F82934C13AAA6F743E6A35EE
-:1004A0003E3614291574BEC2F4D60DCFE2FE9D8DE2
-:1004B00026D88CEB9C1CFBF82310978FB77ACA6F59
-:1004C000A579DB245028AF065A6CA12D59B47FE7DB
-:1004D00000CA07FABCE59E8A1945B8EEAC22607DD9
-:1004E00043EB5F80F433D329640F53FAB30CF0B9B4
-:1004F00061BEFC9EFC33C0CF15922C6F0071A18CA5
-:10050000F7E5F1236FBE317B4D1EF313A03A6EABBE
-:10051000479DC7E7B7622CA0F3BF6C0B6DE67AABC3
-:10052000669884E7AC7CC566A2FC7F18E333DC0CDC
-:10053000F0A5DFCEF47FFC4EA65FF933991EF5BB24
-:10054000987EEDCF61BAF0023280FA3B59A4541183
-:100550003FBDF1D17B9C117C4425985DEFE87EBFC7
-:1005600052F3878286E34F25931D34C96EB2D3FCC4
-:1005700046344C3CF799E63121392B5EAEEA13C480
-:100580006741D3A77F185F42CF999D12CE3FD3D446
-:100590003580FC37F17C57E4D16215F2D0CEBB2D0B
-:1005A000AD75033DBFAD71389D10E308083B247D58
-:1005B0004A3DF1B19AEDE4574522DFDF65EB2C713E
-:1005C0003A62FC01951898676AB53C3355BE944A67
-:1005D0007E3193D61D4B767DD347B45F609FF04349
-:1005E000D4EB3C5F9C3FEDD0E4A0D3FC16AB8FFC7A
-:1005F000695BCB6777DF81729831EE36AFEC8ACDDD
-:100600007F9584E025FBBEF8EFCF66F07C276D3543
-:1006100007364D75E2BCFBEDBBDE27113CE03C3AF2
-:10062000350DC7F332A53D44E7BBB2A6A5531C80E8
-:10063000103FFF50CEE43D6462D3DD33AD544F4CE8
-:1006400026A78A8BBB15768C378638DFCF30BE2540
-:1006500073B061FE6DAE6CC3FD3B72720DF7F57D3C
-:10066000A7BB8B0DF3C85FA9DE463E58EFB0450E21
-:100670008D90C80ECE7DB194F99F5342FC47517EB8
-:10068000562C1C4E95AD7FFE590A1B8DBB53C93F9E
-:1006900013EBDA652DAFEE515CBDD7B555E0EB1B22
-:1006A000967AAF677BAB07AFB7AEC538F2078A2340
-:1006B000856FDDEB0CE239B68DBD78830BF9FBB8A5
-:1006C000A8E77A37AAD5BB897674C55E2597B09F0F
-:1006D000FD32503DA4D7BD897604F094560708FA40
-:1006E00053FD7DC627226F7D437EDF2FDEBE351A88
-:1006F0002A32E499422BE617D44FE7DF64D84C172F
-:100700002EE139743D64C7EC1F1EDEF4FEA012BE5C
-:100710001EA0BAB68AF202AE9FEC91C4BACB76BDE7
-:100720003F2823761F561E35CC8727A53D86F19A94
-:100730002CE3F899C97BE29FEF2D1E556E7CD4AA5D
-:10074000629CAE7C4EE27C95785F3FCFD4DD490A57
-:10075000C54D73B38DFBA92AA7028A83AA26CC2391
-:100760003DE4753D3ECC91A1A6A73837405B77FAB2
-:10077000EE24907FC6BA87D156E83C81FF12F9E695
-:10078000705F057C71FB647944FDD79156F74F3F4C
-:10079000E0BC8E3F839B44DF9126E26E41C34993C8
-:1007A00089F25F1F612F05CE88291D69745172007F
-:1007B000D09FAA17A7044C85787F78E7677654FD09
-:1007C00028CFA017EDA8B72F4C2643FE8952CCC3E3
-:1007D000B1677BE61CCA3F77EC4E0A9B7E063F1E44
-:1007E000AA399016960BBF7F90EC46ECA300FA470F
-:1007F000F5EF40DF57A13841FCD378A967C8E1E79E
-:1008000070DDEAFD220EE06D47623F7B7F5C3F0BAF
-:100810001B85FFDAF197EA9D2A084D73106E10468A
-:10082000FF875FCEFF67781C195CE7909FDFDCDDF8
-:10083000AF75BFAF3E28FCFE6CF3F79F509C3F8B1B
-:10084000F92FDEEF75B9E9FE5EFD82CC7EA95F3F30
-:10085000D32CDF1AEA41CE65BA5F296EF6D75AA7C4
-:10086000D8B776E2F9BB29CFD5B6A086A4EEFBE8CF
-:10087000B47A9D0CAEB87DB6EDB42D0A39627C44D5
-:10088000F5FCDAF27DFAE43C415753FE853A2DFE41
-:1008900088BA06F3AA2583F2EA4CC9BD05C9C196F8
-:1008A00081E524BF8312845D1E5EE25E3B9EEF1EE7
-:1008B000B11C5D77507D06993966DAE76E4DAFF76A
-:1008C00068F8D2AC96592328DE7FD6B0E0A042511A
-:1008D000CE93CDFBFD1A025C1F1E4CF30D5D4175DE
-:1008E0006850D8F9C1B4CE76C2A30E4E4C9682128F
-:1008F000AFBF26BEFE3B68F10DAD61BE345C4A1948
-:100900002D5F4EFE09FDB21617519F0149F477EC99
-:1009100007E641CF30CEB018427B14DCB7CA1DE6E3
-:100920003A7529085C20B1BEAF9AF0AD95F24362EA
-:100930003F3AB969D721A9A0071C23C16EAF855BD7
-:1009400024F6C1BDE10F3FA6FBB678E2F0C3C47A3E
-:10095000FD4A5DAAD7555B92439BF13CEF4EFCB735
-:10096000334B71BC724BB293FAEED3AFD802149FE3
-:100970004F6FB68524BC7F3ABDB38DFA90D3DBF3BD
-:10098000DDB802549A5CFFF906E5F93F59D82E000C
-:10099000DCC23FAED8E9634728DED56E499180EAD4
-:1009A0006B55DCD77B40F9F514AE1316EF1814B273
-:1009B00049B13C43FEE1C2D2E2D4CB490A15FDA7BE
-:1009C000F7DDD397F0AB76D39BC3180F939F3CF220
-:1009D000383EB7F4B5140FD5139007ACB7459B4715
-:1009E0006DA2FAF8258BBA97F8AF78FDCE8159B48D
-:1009F000FEA7FD81F88936EF1840F551AC6EEFB9CE
-:100A0000DE3BDB9CDD17F26272D2F1C4757F5CEDD8
-:100A100023BD274B2EBE6E861A6530D945D34CA018
-:100A2000753DB2A4905F76AE4FE63A35D1EE8E7842
-:100A3000449FB24CC71FFA813D93FC47059643740F
-:100A40007DEEE60D28A71F3CE95ABEEE1C79777EA5
-:100A5000BC7DB655BD43F6B9D1C6B8487B92B16EE0
-:100A6000D0E9FF7AD2789F4AFB39030E51B5EAA24A
-:100A7000719C87FD1E3EEF09BA8A1F45BA42937FDB
-:100A8000D7685F87079F5F52FFFBB73E60B96CFC7A
-:100A9000C72F68DF7D0E81C77C20E497D80F54DA1A
-:100AA00005EE01B089CFAB5F3FF9F2E70564872718
-:100AB0001B7347921E17C8AD275E423ECFA4B41EDB
-:100AC0007902E9F67D9FB05E12CF9B88DFB44B12AE
-:100AD000F3BB8CF8C0EBF77A7D72717F7667EEE33B
-:100AE000166CC867F94D95F3FA921EA3A77BE957D8
-:100AF000B473EAEBEBE7D3D7D7E7398B85BE3ED4A7
-:100B0000F0F70E6BEB19D26FC75BB912E18357AEEA
-:100B1000A7B716A4C5D9CB2F85CBDFA7E123874C78
-:100B2000AB7F63457B6CAF7FD6A2C6C7BD9F88C72E
-:100B30005FA907157039078854C2790B9933E37898
-:100B4000A23E2667C0F104ED78129D07FD72A24611
-:100B500061899AC9783BAD873409423C0E4E76BB19
-:100B6000884E927C8C7BE87DC334A819427C98EC3B
-:100B700011C609D7103E8975CBACB4B57766E17E56
-:100B80006BFAC35AAA67D658845F04E627733FA757
-:100B9000CB49CF33E0CC33E497354E7099719DD972
-:100BA0006658674917F36E44391FDCB7E07DC25DB4
-:100BB0003F37D7F4A77D0F3B9ECB974C54E7855228
-:100BC000A867FCE2933F79FF8673BF046522D515C1
-:100BD000F7EEB573DC4FC4271682CAE34A8858CEB5
-:100BE000E1735F8DFD71CB6E88F1F5D5B81F1AA941
-:100BF0004FB83FED292F3D1F28871CCA4BE7935262
-:100C00000B889F5576411FEB93BA99E869A723405B
-:100C1000B8ECF9A46121CAA72F49EA8364CFF81C74
-:100C2000F7B18123C921CA778FC96A15E3D0695604
-:100C300090707EB4BF26970E60B9442DDAFCEF5C4D
-:100C40003C2EA9F0304E09E75D1C97C727E49D9222
-:100C50005C93E8CF2E8BF9133BCD86BC5352A8E1B1
-:100C6000397F77719D3AE982F9AA79E952B1E8773B
-:100C70004BFA996A7AAA179FD5EE07212C0B9C474D
-:100C8000D40BE3AFD89722931EABB47115E535B4FE
-:100C9000AB68AA3D2023BFE39B859D8D37877711E5
-:100CA000C5280BABA8BE68C2BCA79F03E30A64E6D5
-:100CB000B23D8CD3ED14D79A8BF3D64A35DCC7D826
-:100CC000A9AE41BA416AE573FC0A3A992A5A3E2F05
-:100CD0000737D329E0638A76CAF456A8637A3BD4EF
-:100CE000339D0EAD22FF8F0E0739AFC1934EEE0735
-:100CF0006FAB3451DD51F2EB9EFB87462D9EF42EF7
-:100D00000774BCD29F2E876980FE97DD833C86E402
-:100D1000701C499447A29F4E8488CC7E4A01229B36
-:100D2000F00317FB6B05283C9E7A9D72288BA86602
-:100D3000C66F12E551D1B35DECD4ECA2966CAD7FD9
-:100D40004C4F5DC52E1EEBFA42FFCAA43A34518FB8
-:100D5000FAF592E4F22E1786E22F761C9F63C6BC4A
-:100D600054525CBE221BC7EDC5DFCF31633E2B1949
-:100D70005FBE63388ECFECF8418C0BCB8B2D6EECC5
-:100D800062569F9F3305E7ABE49F8544D10F299EB0
-:100D9000A9A23F5EA9D531EAEADFB89DE82FEA5063
-:100DA000879BF8B463B19F847294B3C57BC761B766
-:100DB00086775B70DE718B7A90FC77B93D9CEA4256
-:100DC000F9AF5C3D752085CEA7AD62BECD26705AC9
-:100DD0009D3FBC1E48C2F1F6EDB92BA4E1D73E07FA
-:100DE000AEFF35ADAFAE1E1120FF551B25B7D06C41
-:100DF000F9C0D928C3F6560B106EAAEFF7D468F5E0
-:100E000014E747979BE3F760ADCE69DF9E9B4B7A73
-:100E1000EA2A163818646415931C8F8EF675D1FC77
-:100E2000688AB0B72ECAE5DEDEE9E012E53B9A9F9C
-:100E3000783DFA0D1E009F3797A8E7E97E75F225E9
-:100E4000CEFB678A3E5D1BC98AD9AD844A9B8BFC69
-:100E500007150859393F4C705EA95329DE2DC4751A
-:100E6000501E253E3548216ECCDCCE528AABB8AE42
-:100E7000A904F7A9B6468615E173CFDD73C42AEC41
-:100E80006E88B03B2D2EB5ECDCFFC46031F4419C84
-:100E90009F55EFBCF8C39728BFEAB30E374D8FF9C3
-:100EA000D78B2BB8DF0487218EE87E37AEC9C6F515
-:100EB000F6F8E6510B69DEC44FDBB289AF496D111C
-:100EC0007E8F166DF97CB03887DE879C977E4E3E0C
-:100ED0003EA9E58993769117E8BD30F77B8DE2BD99
-:100EE00070AD8673D6B648A100C71FD13F2FD2F888
-:100EF0005BBEBF710FE1278B363E349DED2824FA8F
-:100F00000A17FE525C587248F4CD4BB71AFB8D6A33
-:100F1000EA9B693E84AD640FCBEB13EE6FACE0BE91
-:100F2000B93A3EFEF7D0377B4B347C6C280C65BE5B
-:100F3000E4B97DD51EE261625F5C05CA8412AE7BB6
-:100F40007D32EDEF35F78C3FF42FD0DF9389FABD7A
-:100F500052DB9BE4E460B958B99FA87D7985DB49F1
-:100F600063CD6F3799A8A7C689EF7D04F1CFE97EDD
-:100F7000BC789DC47D076CECC73658F89A4D217E2D
-:100F80000B5F1BC87D08F64B5C1F6E7ACDB68EC614
-:100F9000C1DFF509C885844377DE40384C3009EB62
-:100FA0004D81E783E4611C867191474BB4B8AFD59E
-:100FB00001102E32F4F3412DFFD7A68C1C889D73AF
-:100FC0006CDEBE4186FE24A8D5DB25744EAA1BB775
-:100FD000DE20EE27093E767DFC0FC954F7369A7D58
-:100FE000C9846B9F3D309CFB98DEE4EEC53404570A
-:100FF000794FE9FD7C7AF6D5F456F28259C84BB3A5
-:10100000DBB7FD0A7C6D89E945E76FAAFC4685954B
-:10101000709187C1493849EDFE578376EA0BD703B3
-:1010200023106741D8F3D953267EEF5E0A39FF3A81
-:1010300001C7DE536677089F6FD0E222BD7F76C579
-:10104000D9994DC37F935C7DC015D74727E7A41B73
-:10105000C629EE1B0CCFF52D1B6EB88FF2DE4CEBC4
-:10106000434069CD2B8DD5BD69CA68C3734FA74E68
-:10107000DBC77EDFFA08E352FD6EF518CF2337CBCE
-:10108000140FE09CA897CAF097FC6D0C0482A48F03
-:1010900071EDC63AAA2C52C77D63D201B30107B0E5
-:1010A0005D0397DA44FE457172080C11712351DE1D
-:1010B000C6EF2F6AF7CB5CEFD50EC54235AB27796B
-:1010C000DF6490B7EE8FBADCFBFB8C721F38DB2835
-:1010D000EF41AA51DE831719E53DB4C628EF1B572F
-:1010E00019E59A1530CA317BDD38C3FC1175E586E8
-:1010F000F1CD2FDC6E983F2A74B7619CBBF53EC3DF
-:10110000FCFCFA0586FB854D4BAE4BFF45E15AC30F
-:10111000BC44FD17EFFBED55F51FC05FA17F607D5F
-:1011200094A13EC2AEFF3F3B38A6C759DD0EAE3399
-:10113000CEBE4D3ECB78C2844880ECA02C99ED64A5
-:1011400046B2883B1FEE3B7B40C1F147AE624B2667
-:10115000D5595AFDE0D3E290DECF24F68D7795493C
-:1011600009EFFB930CEFFBAFF55D9DB7356C1817DE
-:101170001D00FE6EC673C8FD2E51EF7185E1AED223
-:101180005335EF121D7B8ED376B77E55FF3E2FB1C0
-:10119000DF826507F8BDE25CFDBD0C394569777CEF
-:1011A00052EFC7F43E37B1FFD5FBDEEE7D9AA86360
-:1011B000BAF71BEE4C33D7D12AD7D57B259571CE04
-:1011C0004DA3D4C15E2F3501D8279BA84F8E04852F
-:1011D0003015A0F7D051FA9F8A90C0B3F7111E1FA7
-:1011E0004D03C6CF15A9EEBE401E1FDF192915F00D
-:1011F00011FD147BD5115ED4EB31C9B9B698F089D5
-:1012000071DF0EA37A24C72BEA3C9B8C92C2BC34BC
-:1012100070AE0274FDC7746594D71BC34B7AB39B41
-:10122000C4EF931AFC61A666A79BBF5F4AC417234D
-:101230002617D7A781DF4AFCDDCFB774B8B1B13A22
-:10124000E6EC3A0BD731A0F5F30F68F2D7718FB9FE
-:101250001A3FC770894598971F68DACB7A599AD98F
-:10126000AEE125355C8F3F34C4E1E1EFE19462B734
-:10127000C0C9741C64B0FC53EAAE6BF1BF34F3B464
-:1012800001878237FA5DD7FBF218DF62FD63EB0559
-:101290009E796CFD50C6CF63EB9F613CEA819A8FCB
-:1012A0000DFE316FD561833FCC0F1C35DC8F64742C
-:1012B0005A087F8CBC3568DAFD28BF8E465B29E969
-:1012C00003EDE011D2ABBE7E647DEE14DAF7DA7C7A
-:1012D0007ECBE768F3B7B27E753E8FF80FF138E248
-:1012E0008F247C9F26F8D4710E9D5A77438E99DE09
-:1012F000274A7DDC842BF7867FE87E662A1DCEEBAD
-:101300009C37B94E089CA8660CD57F6D930794D383
-:10131000B9DB865ACD828E14E3416576319E762BF9
-:10132000D1A8C5B18E709136497C4F3457525E9921
-:101330008FFB3E314A7D9AFCA17A496701F95F75BE
-:1013400061E44109D7EFEAAF6E20F948D85E0C4A54
-:10135000673EF8BBB353A6408184AEB2C7FBF57DB0
-:10136000D4279EEA13384315CACEC623626C15FEF5
-:10137000F8A1771FFBDF715C8CF80CFC5912F89414
-:1013800023629D89EB64F4579FA77DE97B327ABF86
-:1013900047D7C93E75BC346A11756254AB175FF606
-:1013A0008A7AF69504DA44352EE18F44395E3F336C
-:1013B00092F0F4B31B6D40F52DEEAF984A62DFAFAB
-:1013C0000C405EA88E7DDF2AFA4CCF5F6C618A5399
-:1013D0003AAEFAA6378BD7CBC8167869C63F63DC1E
-:1013E000223F8CB40E9B991277DE03C0387607E15A
-:1013F000D17138F69B5ED1AFC3C322EE75AC1FCC62
-:1014000078FBF2FDC78E50FCBAD7AB36925C1798CA
-:101410005CA5FC7D56EA2EC6CDF67A5DBC2F9E9764
-:10142000F9C538B486F4B4DC1E619CED5AB87A6F05
-:10143000FC772C6C7D3E8F71645701D98DBE2F9E39
-:1014400063AF370EFFD6CF115BE7EA7EA0E3C3FAA6
-:10145000F8E4CB4F8FD4F0FD79BE1EF2EB114D2E88
-:101460006D969EF1F88B5EF11EAF9B7E6E0620FCA2
-:10147000DFD607733FD26FBD82FF8E39C80FE31BE3
-:101480004A11E977F9DD0E37C9595F1FD751DFBC23
-:10149000CA3E5DA37DDF10FF4B6A047EAFDF8F4A3B
-:1014A00042AF81F5024F5DBEF3F091277097C5AF53
-:1014B000E717533ED09F4F9433CA77247F7F278B03
-:1014C000F75F28DFB3B47E226EFF73E51A1D2ADEB4
-:1014D000D346375D1C46DFA72DA7EFE10AC83E04BF
-:1014E000FE050D465C0BE515207CA3FB7B2DE0F78C
-:1014F00063362D9FD8F4E787980DCFD7A7F8924A87
-:10150000F1FC6F697103E7874CF43DB7169F1AB47D
-:10151000BE3B117F696815B86943A695EB68AA7F41
-:10152000E8BE5EFFACFC58E0A62BB3449D4DE7241B
-:101530003D4B87F670BD7005179730DFA31CD3AD08
-:10154000EA9052F2277505E733F946D433BD0FF917
-:10155000EBED1A8E20F2A357CB875E5A87CE95D734
-:1015600097F36489B62FF6178CDF8D0555AB1F34C2
-:10157000FC6DFD1E03FEF07FDDF5EC49303100000F
-:1015800000000000000000001F8B080000000000A9
-:10159000000BFB51CFC0F0030947B0A3F20FA0F13D
-:1015A00067B2A1F2D3B850F9875950F9FE68FAD161
-:1015B000713B13030323137E35F8B0083303830C08
-:1015C00010AB00B10E33F9E680B0BE2803438104AE
-:1015D00003033B90FE23CEC0E00E641702B11790C8
-:1015E000DF02C45381581C287E16484B8931303C99
-:1015F0001185E8B300B23F8B9167A7192F656E1E66
-:10160000C594611359543EAF1A03839B3A03439F19
-:101610000684AF8D24BF1428C6A70661EF976760C4
-:10162000D004F29564B19B7B0028AF0594DFA681BE
-:10163000DFFECD3AA87C0733547E269A7CA30B2A82
-:101640005FC30D95AFE30EA101C062BAC4D8030019
-:1016500000000000000000001F8B080000000000D8
-:10166000000BCD7D0B7C54D599F8B98F99B933997E
-:1016700099DC241398BCE02604081A7012C243C4F3
-:10168000701322468D6182687197BA23AD36A240ED
-:1016900040D6C647CDE41D5E1AC4EE22B874E213EC
-:1016A00094D6D462FFB4AB7402B8D2966A54ACB488
-:1016B000B5DD485D6BFD2BBFA0A2D4D2B2E7FBCE57
-:1016C000B9997B6F2601B4DD5FE3E3E6DC7B1EDFC7
-:1016D000F9CEF73EDF39718A0EA2CE23E40CFCD09E
-:1016E000E71B84FE64269E84741332039E03727883
-:1016F0002A3CA3FC3D7B0696F60AA4008BFD6426DB
-:10170000217984FDE43576AC16A7113296847E3AB1
-:10171000399F96076EAC217E5A7EEB8A3FC2B36337
-:101720007165F5651A21594B7A5FBD9C3E03E198BE
-:10173000102926640B1109C986FE0AA3155E42DA38
-:10174000A0B339848C8966E9D16228E8B440C8BF67
-:101750002A7C20226A322DFBF0D7C43C8C27214EF4
-:10176000122FC28AC219D7F0F6F6FAC6D307ED8C4B
-:101770003AF9F0FF3504E677B676642D1B2F4AFF61
-:101780003943F19293181FFBC9AA379509E0C7FAAC
-:101790005D1FC2FBEAFF93F1B249A95B2BA3F3AD36
-:1017A00011D518D427BD69322D076E93495CA0DF8F
-:1017B000CBBA058776F675E920A4BAD78BF815EA77
-:1017C0007C09F8AE2502CE67DC5DEFF474060839BB
-:1017D000B9D41B42FA5009C9481F3E9F6F371112F6
-:1017E0007799CA8B2B85088E17FA69216D1F5D2C9E
-:1017F000861E07786A16A5C17BA3DE37F938C3E9D0
-:10180000836832C5A3CCE943AE1175F7B42F4F1FDF
-:10181000F217A48FCCB5A676E4FCD70BF13EE3DC3F
-:10182000E9E3CB8E67ACEB70BE6A4638C6DD55E89F
-:101830002674FD1FA85E941A49526FE4752D457EEB
-:101840000FD4103D96A4DD3A584F9C67D4226FF018
-:1018500049D7471A5ADEDB2DEB258D9DB9A46714B5
-:101860007C4801EB7C8D7E9D8D92F64E062DCAAA9A
-:1018700008FDC9BCBF0E75599400DD026D537C484C
-:10188000DD257142F9830449E8710E8148CB4E553C
-:101890008FAD17A014C37531E0530A45CB788E5C29
-:1018A0008F653DC892A86086DFD9E844386460132C
-:1018B0002EEFC228DC18DC30C4990950BEDBB2FE22
-:1018C000B297C4DD54AEAE2B2C25E67530E854102B
-:1018D0000C3ABDFBDCE48A7DBCC55638CFB99D57B8
-:1018E000D6DE35DA148CD64E26EF1A78A2C87B1DC8
-:1018F0007E31AD7BA783EC152E22A435B7230A6F6A
-:101900003BE17F17237D82D0229DB9A52AD013D930
-:1019100029C800A7DB208F603AD6EB211AD2535496
-:10192000B883403DC91B463C19DF47868BD35D54C5
-:10193000EF2BA4FD5ECDBBBD9AEB3352E67867C0BA
-:1019400080BB00E79128D3797C7827FD1FA58F689D
-:1019500089107B5C18FEBD06F421954735F0DE2426
-:101960004F5C82559ED5F06F079E7B73D2744A8F71
-:10197000FD218980B86A79CEA557D1FE5FBD548814
-:10198000B9040E2FAD5FCBE13CAC67E4017DF657A7
-:10199000B9907E6B2FFF2C00E47B7CEFEB72327EE4
-:1019A000AD9DEB48C041FF5B659E1FFD6F0C8C81B8
-:1019B0007C59857464C0B5A2544238FAE70A3118DC
-:1019C000E7E06FFF70DF2514CEC36542C8A521BCD8
-:1019D0003E42C7EBD73F0E8C26278831BE4654C007
-:1019E000A77DFCA1F550424B802FEB55A7B69E8EEC
-:1019F00077AB143A047A8C8C65FAA15E9D5405EBA2
-:101A000023098C3EE60B59D8AED5DB3206D75D5A9A
-:101A10009A545ED55345A196C2F78D93468533E619
-:101A2000181C30D175E35BF9F71D34C13955F00549
-:101A3000DE4DA1BFCC22B3609D3FF22E4A8D939123
-:101A4000FB7BBF4969961D847CD6A4DD77D031FC31
-:101A5000FBAD1269E82D1EFEFE4A41E1F8883AC14D
-:101A60003E33E63D344F6F00E9FB5610BF94D46F10
-:101A7000DDE96E96CDF2C7368F21FC7EC1764A60D5
-:101A80004D345B037E8B2C14A01F99FE3333C18F22
-:101A9000B7EEAE637C6783B73DF0B781F76C7CFC33
-:101AA00091B7A503ECD55607A397B64C31D442861F
-:101AB000D38BB11E061ECF753D360A6EE40F838EA2
-:101AC000EAC5A5A3AEFBD9E8E80EA0A30BFFFE7400
-:101AD000B405E868C63F241D6DFD47A4A344F97210
-:101AE000B41716F2BEFA067EFF20C8E75FEA12CAF4
-:101AF000BD5FCE65F2FF97112617FB4964D30CD06A
-:101B00000747249453FD7AAB0FE1A52631CC03FDA2
-:101B10002E4A7FAF83BD3499CAF526059F74F679A6
-:101B20008BE8F7572FFB2C17F4D7AB746DC1FE264B
-:101B30006450D769FB5786CAD40087B29B95079B30
-:101B40004F45C13EEF1758F927CDA7F4288EB7B1FE
-:101B5000E3728ACF85F02B8563F15C418F25A18BE1
-:101B60009F094E86972A62D1AB745D7E26507A51CA
-:101B7000C2ABD1AE26244CD03F2CA47682C9BE681D
-:101B800004050672B9CA85FACFDEFF2BDC2EB4DB62
-:101B9000718BE79638405FB8C227E401FA5C1816EB
-:101BA000B00CF8574D708BBAA0831E08CF753D025C
-:101BB000FA2F2C13879A845F17EA2E8BDD7582EB40
-:101BC000318A9725CC6F51F3EAA626EA9F30F4AF0D
-:101BD0006D3E23D185310FA37CCDDC13073360DE4E
-:101BE000D54268223454D4BC1B7CE6FE530CFBC6A1
-:101BF0000778FBE5926B52191D4450AF1AF4F4D3E9
-:101C0000B7BFE180F993C51948978B6B248B3DB919
-:101C1000A82AC552BE6EEE35A3DAE12462C28389DA
-:101C2000EEFD3904E994FC37B553289D462B072374
-:101C300068B71C13B4565A4E2D6F1C0FFDDE2DA62F
-:101C4000637DA1BC71F200DA5B0B90FE53789FA913
-:101C5000CE863F14805C9D28924734B04747F70BEF
-:101C6000DA399D1B6547201215E87A6A51B5541A76
-:101C700005DF315DAC4EE6374C10D9BAB54717A930
-:101C80008500D041ABDC48AB6A40FBCFA84FE97878
-:101C9000829809E346F1FD101D77D179D1761E6651
-:101CA0008B90D40B16A59251E6D1665B7F2AFEF588
-:101CB0006472F6560E1FD9CBFA3764526A3AED3F7A
-:101CC000497DE3D9C9FB3F1512493FC0298715E477
-:101CD00087A24A62EE87E8255876F2A22B1856F2C0
-:101CE000293E5DC5224C83B4173FA2CB1AE0218A5E
-:101CF000EBBD81AE6DAE892F37FC45423FFF56B13B
-:101D0000A019E4C686BE5B8846F1E109C60896A71D
-:101D1000DEAC009E365027AB1FC6977B09C0919260
-:101D20004B7FA7E3A4A824A6D1FE64AD372ED2B280
-:101D30005C4D423AFDE453438287CA89FDC1826605
-:101D400099BE6F5B4A503E12901E26FA690BBEA6E2
-:101D50004B403F4B4808006E0B2CC37976142FEB99
-:101D6000CAA7EF4FD6C8183F20A729BC865F4FFDF2
-:101D70000C4F11D161BC0D5924E6453B5847FC3A44
-:101D800055B67EDAD642129F4EBFA7CDEC83F1A3A3
-:101D9000DF228C2F09936B32972744A6F407E33791
-:101DA000AAA1F549E84F21915BC419A67556C3E86D
-:101DB000C7DAF196EA2457027EDB4A281F24917B7A
-:101DC000778822D2412CB46861419271EE16359425
-:101DD0004F46593BE544F847AA9FA82793780674D5
-:101DE000AD0B8017120EE0FCD2C9D08F0EE50C3E71
-:101DF000DF31A401EB056777F701BF65EBBD158007
-:101E00008B6FFBAE7B15D78D3CAC821D4BA12D3C5F
-:101E100093919017A073607E1F8544F43B7C625CB5
-:101E2000D569073E777F109D5F8D605C2E159A50B7
-:101E300080D737296D6097F8494880EFBE901C35F0
-:101E4000DBF5A984962DF11472A4702661221FBFC0
-:101E5000AB7DC03A6A51C34500CC16BFFE5FE03788
-:101E60006DF445D00FFBCCED9F06837DD3E37F045B
-:101E70009E9FB9C7C5D03F0B317F4BA1FF80BC4BA4
-:101E80009D2D5BFC9B34DD5ACEB0F9610B242FCE27
-:101E900033ED6AC2FD2BBD66E298045C14A23AA041
-:101EA00097CD553201FFDFEB65F018F06548F7CCB0
-:101EB00042FD18928F011C142D08C749723A0E4B2F
-:101EC000EC2F22183FA5701DB3C175CC06D7313356
-:101ED0005C8D0A9BAFDD5E8C5692A2060ADC0B225B
-:101EE000F73FA8DD0476E349F2815E0D8413BE124C
-:101EF000F5AC5F656DBC4A3F062B54A2221DD8EDA0
-:101F000046BA4E1F59FCAFD9BCAC1101E641E1B451
-:101F10007E27B9482F5896C8505C78D96C035FDA91
-:101F2000577E43F9EF96430E02FC45F95882EF0EB7
-:101F3000FEF5161E1F5E06FE35C5DFD749D80FF029
-:101F40007D48448C437D485EF34F37C9C9E322B7CF
-:101F50004F6089CD7C4C424190E3B2B7A35FF2233E
-:101F60001A0C7A13CEE03A86989CF732BA8B12A5F7
-:101F700019F56117F33F8D78EA4DDD567FF81B5B4D
-:101F8000ADE59BC9A231102FBDF9410789D17E6F04
-:101F900031FBF7749DDE105584EF1BA4A103EC9276
-:101FA0004E07B33796A94486F8E78AFFF71F336FC9
-:101FB000A4F33909F26006D8EF147C931E591E88E9
-:101FC00039F5E2E1F36B1542B5970823CFAFD3D1D2
-:101FD0005F0BFE77749303ED4C628F83EE91300EAE
-:101FE0006A6A87F07EADCB3ABFB3CDDF3E5F421E5B
-:101FF000C0F92EDF7923DAE723CDC7B933B9BDE9BC
-:1020000095044BDCC7E06B83DEEDFC5D26692CAEEE
-:1020100043D520DA2BBF4B89B5E2FA36CC82F53DA9
-:102020005BFB8BA17DE6176F5FFE25C79F7F96F652
-:102030002B94C105B0DEEB02DD61E04F238EB5923B
-:1020400044F51CFAABE3F9D55130DD86EA05CFB192
-:102050005E2EAD279D43BDC2D1FB3BCEED92977660
-:102060003FEA043BF5C3A7DEAE053BE0D6FF94880C
-:1020700042E9E1F86E1F89A3BD1273827DB39CD241
-:102080005D0CCBF199D798EC614AD1B80EB73EE31D
-:10209000433B62F9B3AE580D6DBFFC87BF9F462826
-:1020A0001E8EB70CFE570ED0F353028BBB4607A60D
-:1020B0005D43DF2F97C9BF8493D0D18D12E3A70F63
-:1020C0007E94B204EC446167DF0DD86FEF571C2E8D
-:1020D000933E5E2239705C5A0FFD88E82E213651FE
-:1020E00060F099FD0123DEFDC12E81C1B7D71173C8
-:1020F000037C3B7B9C115A6FD5CE1348D7F39FF9D5
-:10210000AE1FF0B06AAFD54E5FB5538ABBA6E1F300
-:102110006D7882061566023E193FAFDCB302F5C644
-:10212000CADE0D27809F57ED7558E43FC54B280E3A
-:10213000787D530AD540F9074FFA358AAAF7FB1F75
-:10214000F7035E69BF373A295D2D9C6D6D07FD9FD2
-:102150004A1FDE1FF50CD16F5ED5BB8E8DB7E7EA47
-:102160003F80BC5D45989E32F8F97DF8256BB89E9E
-:10217000592759E35B27C9E199B80FB83323A9FF61
-:102180006CE81583AF6FFDEEC91D513AFE07CFFE17
-:10219000FF1D513A8FDBFEFAF18EBBE9FCC83EB75A
-:1021A0000AF26AD5536FF88909FF8F496C3FE0F84E
-:1021B000AE279FD846F9E4F8AF5C68071E7FE10FB1
-:1021C000E3343AFFE3DFFFD318B053D7BE70D958DA
-:1021D000C0C7DAE7E68F1DCD5E07BA8DB9CCEB1B21
-:1021E000C3FEB5BD026C8210F23C7FDAD6E9C01E98
-:1021F000290E21820F8FBA622E8A9F55F45D6329C2
-:10220000ACDB0AD45750BE87E27BE5EECE13D2B4E6
-:1022100064788FE6884178C6734810D6FD9A859712
-:1022200096C1D311D2804EC820EA097BBB5547E83E
-:10223000FA5E34F27A527BC209F85FB57B1D1BB798
-:1022400097AEA77FF87A7E08BF5C3C7C3D0F48D6EE
-:1022500038D34972DB77B6C1C73D19B8FE23ADE765
-:102260008AE7AE1DD5BF33E4C3D9F05C2F30B8EE9A
-:1022700097F4D725E0C7679F7E625B80AD730D45FD
-:10228000CCF1EF9E1C079BBCEF39066F003939F883
-:10229000824B05BB7AF90B6F22DF1D7FEE55A786B7
-:1022A000FBD3C42B503D799C0CFDF483DE5C29B03C
-:1022B000C2AAC77C71973FB15E2B6375D59A1FDFA9
-:1022C000BF8DEF638C1F56C6FA160B49D6CF2B175E
-:1022D00030FD14CB44BCACD0FA9DAAD7BAAEC26CC8
-:1022E00058CFB71700FD8DB49EC6FC5598FF2CD370
-:1022F000BA3EC6F878247E3DDEE39285D4E1EB7CDD
-:102300009CDB15AB62C29BC9D69D901616DF1B21C4
-:10231000EE6D3CED74E194AD7C6EB437E67F363EF5
-:102320003FFBBCCE0F6F27B9BEB6E3EF83D3C9F531
-:1023300040812C70BDD55D9D6DD2776E07D563F958
-:102340006077364473F213F076F44A28DF3FD829D9
-:10235000A1BD6F97132B47F0EB43C6387BFBA681DB
-:102360003CFB60FF8F383D327A5FB9FB6D6794EBC1
-:102370008598592F407F49D6630EEF6FD5F3C9FB7F
-:102380005BB5FB44D2FEDE97F5AF00FCEFF73B48B0
-:102390009476F17EAF94344E52283B2C7656876F5C
-:1023A000E6D154DA4EF27B3498776B8BFE6614ECF0
-:1023B00091D71C04ED4739F49E8B7E6FF57970BF81
-:1023C000A5D57F33D14CFABBCD86273918463F5A65
-:1023D0000E84CBD85E68CCE2CF3A54D1023791A3B9
-:1023E000B9B0CFF972FE1F64E817E2699A292EF49A
-:1023F0008A4CDA219EF68A2E849A4992B896ADFFCD
-:10240000F05C8968663AD3C78BE6F8A27FFF9D1817
-:10241000D768240D718837915CD2FBB8A9DF879B00
-:102420003416770D8F17CDF13F574383EEA270E43A
-:10243000AE550BC07F1B69FCBC06EBBEAF31FE1A6C
-:102440001E8F203B9F7AEA295A1E0FDF44A0C3B09B
-:102450008E709C66FBCAF3B93C7C89DBCFFB0572AE
-:1024600010ECB0EA7B2232C83B217823C64517E442
-:10247000DE282F33D1E382E0892CD0ABDFF98BB497
-:1024800024199DEEE574D5FCAD27B2A0FD36F757B3
-:102490007299331B46F87278BCEB60E6E55E88EF14
-:1024A000F5DDB2E0F0243ADF6C552210AFC92615F5
-:1024B000DE120A67CE1129E44EB20EC673078FEB07
-:1024C0003DD2A4A2FC7FAC2988E527385E7736157B
-:1024D000E1F3A9A6107EDFDD341BCBBD4DD5F87C22
-:1024E000B6298CEFFD77FDB8CF0978B997F442BCD7
-:1024F000664FD312FCFEC3A6083E1FE7F3590078CF
-:10250000F15AE68FF198BD6DF35A201E63E0D18E2B
-:10251000F779247AD085FBF9820678BF5366F2C535
-:102520008EDF71AE5E01E44BE36D04EDD71D3C6EB2
-:102530006CCCF72199D99B7B383C3F7447BE27C3AD
-:102540007E53756131DA45241C02F9BD4308A79614
-:10255000D02A2F66CE0A9AE570B62FB24736ED2BF9
-:102560008CEB62F19E6D329357E3B5137D69140FC6
-:10257000D5B98206E10463BEFB2BB45C9093FB05E6
-:1025800001D7BB3A57224526BA37FAFB0F59E4FB6D
-:102590001BC9E576828E993C48BF422E02BFF624C5
-:1025A000F18424CAEFFBB2C81E42ED8F7D40972014
-:1025B000177E9B827162C3BFD9C8D73B1D8802F2C8
-:1025C00025DEF2C540FE8CE4F774F0FA1F71B856B0
-:1025D000C8E1D765DC57E6F15712C73826A41C01BD
-:1025E0003D6E732FBDBF8A3EEF9BF3FE51880F7E79
-:1025F000F89C5B03B836951DF39BF148EAE50FCCD8
-:10260000FBF143F2E6540EC6C5FE8744DE96CD725A
-:102610002830E884F6FB046D33EC5F47DF9090FFD1
-:10262000F609B12918C79209FA05FB6E09627E877F
-:10263000D1CE17B2F277BA7B60FB2A9877BD3314FC
-:102640004DC217BF4ED12CFB46AEA0B57D1074E62F
-:102650000C56D6287D96F07987645D02386690081E
-:102660003E67110D9F598EC8E7308FE9A4370BCA1A
-:102670002D29E32E61FB077F37BC298E7F40BC19D3
-:10268000F41A9C53847090BBC4D0440DBD490B9D7B
-:102690002F74081CBF0ACAF3ECA1FDA98697F202A9
-:1026A000D80D8B93A8292807B3DD0C7F8D03273025
-:1026B000BE1B1C472C71F7F67A11F960DB5B6C5F6F
-:1026C000EF647DC1E649B47E05D1EEAFCA1F3E0F6F
-:1026D000833FB629E1D464FB53C6D3E00BA3BC7996
-:1026E000FC0D04E4D0BF8FBF01F38EB2DF726BE04C
-:1026F0007754FC6E5733C8C5F6B7597EC5514F6441
-:10270000AE634642CEB4DFD2301EFC20B72F5C0E43
-:10271000EFC3B9B1EB41DE9DAC5EEBC2A97B59DEE4
-:102720004BE33DDAE6C9DAC8EBB3A371F4FD1B63F2
-:102730005E3B605EA3EC5F18F332D6EB64F5E2C15A
-:102740009B35903385A99124ED86E4C9158B471DEF
-:102750007F07D72B74FE4BCDF439AE51C5FC16A3C1
-:10276000BD315F7B7BFB7C13FBC0E79617D4EB206E
-:102770001940EFDFFFF3B81FBC82A2312C819EA667
-:10278000FCB912E099491AB04CE4DE2CB06F0C7A17
-:10279000DED6F14416EA0539968FF95DE7385E3BDF
-:1027A00009872B80DF4262C86CAF18CFD6213A8FE1
-:1027B000635CD5C5E58098724F30199E87FACFB516
-:1027C000F2FF4642989C8F2B28E72150A8D272FE38
-:1027D0002152BA9EF6570F49A1749C0A99C543A687
-:1027E0001FD27A24165795EA7C263CF2FD0623BEBA
-:1027F000DB4EEE21AA067E45491F5437F8F480339C
-:10280000F2A003F2F0821AE67B3A021181EDC7B121
-:10281000FDA1226E975C262D55C02E692461E5022C
-:10282000E0DB23126179788CAF5DC63E18E7631751
-:10283000E763CAC1589EC4BF3FCFE96B2FD8276852
-:102840004F303ADAC3ED93AAC1C1033EDAAEA8BF56
-:10285000BB12A6F32CD82B2EB04F42F8FD7B60AFF5
-:10286000D0F281B47FBFF2028A979DBA18025CEF62
-:102870006ED2193F34D5E3F74612F5AC06B9F4B081
-:10288000A8029C9D0FB7487E5ADEA50818BF78B8ED
-:10289000A901EBFB4F7BE2E06FEE52E202D8232767
-:1028A00043241405B8A97B04F39AC4E751F14E3FC1
-:1028B0006E973F11FBE8F7F7D37A5B667B709FCC8E
-:1028C000E0AF498D83EA95C0578F1FD35603FC3381
-:1028D000D6E8507F63A800F7299EA4F88275DAB97C
-:1028E000F5A3ADFDF4BB5FEE5C0D7EF0E4BC456886
-:1028F0000FF9957FBF1DCA7EF5E97FC5A7F2A36FCB
-:1029000082BE9E1C132DFBE77EE5E777C2F7CA81E6
-:1029100050552AED67CA91FEAE2BE8B33DB456047C
-:10292000124F4DFF23EE6BEC17D4AF77435CED46AF
-:1029300027D2AB7E546F0676749459F320330F4739
-:10294000206D818C3D48F14E00EFBA0CFDBEE7C80A
-:10295000473A0BFAB3AAFCB4FCC463C77E7A05FD00
-:102960007E60EB1A948BAE8765B4C726FFC75AF218
-:102970000D939C703D2627CD2B7DCFE1627CF4F03A
-:10298000E2EE291A234FE0BF298F572928270E5B33
-:10299000F31C8C7DE11E1279CF81F4CCEC135965C8
-:1029A000FBC8B0E705FB8964BBC8F8241CF198F3A9
-:1029B0009F8B1E12C3C9E2DCA71C32CEAB2D56552D
-:1029C00004EB209FB903F7C948B7757C633C3AFE16
-:1029D00029B37C935506571EA87EBA9E7DCEDF6430
-:1029E00001FCA71A0C3D15473D75B0448C8FA7F02C
-:1029F0003DF0A01883A4CC03D54C6F6D9259BEE076
-:102A0000265E7EEC348909F9093E9ACCF9EDB1874E
-:102A10004566CFC508EA3972FA0CDA175EFE3DBD8D
-:102A2000E43505F727A2BAB762266605F21F13BD83
-:102A3000501C5D14F558E4ACD8986E59FF3C6AB14F
-:102A400058F3A90B12F52590E34714A0DF93D46F38
-:102A500005FA9DC7F789AA8C3C4CE9F47498FF7677
-:102A600043CF1A7933B63CE9C71B9679205EF8A2AA
-:102A7000413FF50D3AFA3FAA0BC733F6098B6E0BAF
-:102A800047417F3A72ADF9D315B6FCE879B6F2F951
-:102A9000C6574A9DF638EAC62948079A1FE55521C8
-:102AA000C7F3E31753773E75789C65A85F1E4720F0
-:102AB000DD7E5CBF424E40F7DD25D5835FE07FA021
-:102AC00034CD9C5F70B993D9DD077FEB2260E7EFCF
-:102AD000AA52309E69E4753AF8B8B54E0DEBED7A1E
-:102AE000F00E05DA77060ADC80AF0373967B30FFC1
-:102AF00083E7A71A72B765CEF22B6F01799829A2E6
-:102B0000EE69CF6DC9867DF907AA14CC3FF5A70CF5
-:102B1000F41EA065EF93CED023F4FBAE8AF81273B7
-:102B2000DCE60E27D35FD73BF93ED0466BFE06E5C9
-:102B300083EB9D901FE66DC07D4B51E179BC36FF64
-:102B4000DEC0877FFFF562BE8F3D0B7CE08F32FADF
-:102B50008871FAD8C1FDD38741FEBB806E98FCDF37
-:102B6000C8FD537BBF13EBC3FB9D6087DDA6964278
-:102B700028CABEBE13BAACF6447ED42AE7C6DBE947
-:102B8000BE21DB523FA7BEC0F2DD17BAC0669FC4AC
-:102B9000995E236C7D3ADDDE0920B74BA9DE6576B0
-:102BA000862A86CDFB2A36BD5EEFD09B9CE761DF8F
-:102BB000F853C20DB03E767B7A035F9FAFCAFA3AF4
-:102BC000E70CF4DF36C093DAC73C5FDD6A7F0C8325
-:102BD000935038A78E0AE783E703E7D9F6D9ECFBD1
-:102BE0006BDF94C25B5FA1CFF254960FD9EE63FE08
-:102BF0007C3BC45169F9C79C0E9F764AD8FF5E3E64
-:102C0000DFF2145A3F097F1BF1D5E721F106EA8D67
-:102C10004D9E670916107ECF49FEFD7927DBCF2E2A
-:102C20001F3FFA38FB601CFADCE8D07FE434C5F1C2
-:102C3000DA9CFA7F9ACB7127DB7F1E5A179E476971
-:102C4000D8637738F43E73FDC4D32A378D7D904C1A
-:102C5000BE9E3EC2F8EFC525CBD64DA4FCECCCF50C
-:102C6000A2FD93B9A46DB5E887FCA37E15FC814C49
-:102C7000BE8F4F1633396AECABA7D758E5AAFDBC17
-:102C8000958BE7C5BBECE76CB87CB5D3E348F2F5B0
-:102C9000774EEBBEC650FC7A04BAB2C7AF1BE15701
-:102CA0006667723B389CBA68EAC8F4F872D3E0A64B
-:102CB000831313E557E0FC4C523A60FB89FEFD7F1D
-:102CC000AC595C06FB762C9ED6DF142F7F676242E0
-:102CD0007E85E7A6BD0871CF70551ACA9BDAE0A7BA
-:102CE0009B0E527FBC4EEF2B7FC734CF7E95423B6D
-:102CF00061143ED11D9F9BF9EB4981D14F3B1FEFE2
-:102D00007E8E4FBB1DDD29465DD0EF2764401792B4
-:102D1000F8B5E679B721DE06BC406723CD3BE46217
-:102D20007CE59FDD1082389DEB8C847CE01A6FD8A7
-:102D30002D21B45BA6BBD2D8B90F6F01EEE3513F92
-:102D40007DB00FD6C1CBF2FB0DFDF8B1114FE57A86
-:102D5000EFF63456DED0C4E2C7AE0317BFA9D17672
-:102D6000BEC30EE2A6EFD751B90E71C02E6AC7C31B
-:102D7000777FD90081387A2BAD1F31F9DDADA14ABB
-:102D800015EC84B6E25245A3DFA5A9655896F34B2E
-:102D9000D54A3AE605AE6FCFCF843878A18879B5A9
-:102DA000C5B4DC4C4DBA54978AF37BB9E81D2FD8D3
-:102DB00067A9E09CCF48ACA7A32CA24B141E475098
-:102DC000AD845C8C21BDCDE98CBE7F04E2254F0A29
-:102DD00091992E3AFF97F9F9AB4E6743D11AF07BE0
-:102DE000E4A80BE2078D0ADB87007A689B9E807B54
-:102DF0001EC7AF938F3BE407F1F5FC441E88426A7F
-:102E00006BA748EA93ADCF152E26E7DA545D1D95E2
-:102E10009E54F9734BFEF45CC64FCE00A5A724F177
-:102E200047BBBC26AE709D2B3391AF441756453E31
-:102E300025CCDE33CEF7BCE3D4AF75D1797CCBCBD8
-:102E4000E5586E3AD2297D5FE9F942729FC567F66F
-:102E5000CF2D7BB50AFC927E07C68BFC13C8BF84BE
-:102E60004DF2F6900B836EF4C9ECA4F5943E629398
-:102E7000595C8200DDA450450CFB907962EC917C9A
-:102E800080B7A77A02EDAF539E482DF3443F1579E2
-:102E9000CCFEDF54E9A937FB01EFA5B0FD97B5DE05
-:102EA0008A67010FC5DE5825BACF909D39869D9F50
-:102EB000023ABE502503820872304C98DE0C294C31
-:102EC000BF56A9705E4A201172266534FD683D57D1
-:102ED000F5941C6BF1003E022CDEE5DB2A6032A08B
-:102EE000D4ABC73DB44EA977519B8BE98B2218A771
-:102EF0006FA6877869FD4FFB9C681FF6FA7264C065
-:102F0000EB3E71D97720FE34F82B17E637F6FEE555
-:102F100002CCBFEFF55DB200E476AF400E51654FD5
-:102F20002A4EE5F064439202FB7CFEF93A817D8EE5
-:102F3000C1174908F2831DC19F97BF331D279E22E9
-:102F4000CEA6EDDCA4CB4DDB853EF77C3C8FD2D505
-:102F5000B3DED22D1791445CC588A754A444B603B0
-:102F60009CED637E5D0F7CD345E194D07ED58300DC
-:102F70007769A688F14792E98D4D8478D9A14015EB
-:102F8000E48F56C825981AEB9FCFD6FBA827F238B6
-:102F9000F453A5D655417CBDEC888672764170F518
-:102FA0004128CF7C8B95DB9D8C5F205E444C72B7B3
-:102FB000E2D4389C5F2FA793B6A0DEAF0BA3F28DAF
-:102FC000EDDC81355FCE4C0790E76EA28388C34C61
-:102FD00007B3291D4C35D3812E9C0F1DDC8BCAFAFB
-:102FE0008BF08FFE66959088DB0DE783D54A7AF1EA
-:102FF000707E31E0585F961E00396AF0853AEB1E0C
-:1030000094ABAE1B9D61F0D70D3E31F8E353B7038F
-:10301000F990F2C9551EFA5CECD52E4BC627E08715
-:1030200098F9E19A11F8A6960C1E0CD046B5328993
-:10303000A65251F2F2C5EF158E33F1811D6FB573B3
-:103040000572CC22CF58D9845775E87CA374EEF86A
-:103050007F4DD6DA03263EECA07E0818CB5D628851
-:10306000805E29F52EFB14E852AEF97E10FC4187F4
-:103070002B5C8F79B3B33E48B999D2E5A763440D71
-:1030800026DFAE2D7B06F9F9680A01FB64D3CCE597
-:1030900018F7FDF496C878D013EB28FE8FA15E8E4A
-:1030A0008D15310773602CDB6FD782EC1909B2F7ED
-:1030B000847F8FF1B2CEEB0D603DBACE16F9B8DE4B
-:1030C000CDF6BBD6BB99BE59E7EC5680DF06F315AB
-:1030D000D59CEF3C4F62766C89C2F79F4EB76A1061
-:1030E0001F2951989ED9D2D48BF6C7BAA6BDF8CC69
-:1030F000A88911C8A7F2144535D8F756FE3A5F7073
-:10310000001F5FC0F667E17DB3C9FECA51181CCA33
-:103110005FA508F0A7D212D5D24D7256118548325C
-:103120003B7AA39BC55F941682DF95FD0FE17E7607
-:10313000466148B809CA2DDD2404F1F3387B1F2805
-:10314000D485AF9BFA0DD4F45AF45C2D5D82D45231
-:10315000B49EF0BC4BBBE6C1FDAFDA40E51FE569AC
-:10316000C3E9087E8E99E8C180DFD8875DCBFDEF8B
-:10317000AA0205F9AFBDD1D903AAF92A85D9459F7D
-:10318000042A473D2F00FBAFD472433F179EB00F78
-:103190001B9DCCF661A10CFBB0F0847D5878C23E3B
-:1031A0002C7C877D58287FAF49C732ECC74219F67F
-:1031B00063A393D9FE2B9461FF159E7B9BEAF1F9E3
-:1031C000E3A606FCFE7C532396E7B9987F438AA2C8
-:1031D00041B097BBEE74EA9067D3C2D7EB805E90A4
-:1031E00011A2EBEA0EB03881FBF00378DED91D1492
-:1031F000316ED7117C807C8D3EBB66F8BA20EEA183
-:103200003CE3C5A75BDE42C01EDB2144EB4988904E
-:103210005BBA4AAA646A2714065757A6D3F2AAAE25
-:10322000596D907738496B0E2D531365CD57BAFC05
-:10323000FBA6F2F8E21ED913023CCF6903790070B5
-:10324000C0A6D9BD5D73AB9A0BA9DF54400D159094
-:103250006BF9CE18D0F3D761BD2602FCCCBEBB8A79
-:10326000B40621AE315E7396021FD2FA7146FFE7B3
-:1032700056BF45D1F0BDBDDD68F5C4B273AA47A401
-:1032800051FA83EFC228FDB49356B59FC2BE0164C4
-:1032900006D8476EB6CFDBE560FCDFE566CFB7DD6D
-:1032A0008C7F7FE8AEAC74D367A59BF177973B5CCE
-:1032B0000DE74D06A78A18DFE975D02EE0F04163CF
-:1032C000FEEB702EE88E9FC904F60F1EE27430717B
-:1032D000BC8FE9E9BB15D4D3978FFF6E5B3A2D4FB6
-:1032E0007C341402BDBB81843C4027D18D22E6A1F1
-:1032F0003C5D3621BD8E56BF70C673E9A07F3E553A
-:1033000098FC89717FA3B9FDE6F11097FAF4552670
-:10331000FF7672B9D3E3E86FC0F59CE1457B853A4F
-:103320000C688F340765CC1F12B3D8D3E950FF095E
-:10333000EA39A9C28F52789C7F99A560FCE3948BEF
-:10334000DF6FD18F768AD31D51D3E8FBEEA888FCBE
-:10335000DEAA7A6260576FF096E2B9D268B18CE764
-:103360004B3614B3F8698AEFBA18D827F7F7B9992A
-:103370007CF02A983F1A2BDE73A832004F51057E4D
-:103380008FE98BAA11EFAAA8621E2AFD0DBFD707ED
-:10339000F03CCA06C2D7A55EC4F374ED633EFFF9E4
-:1033A00045909773931AE2770E609E379A5C22ECF1
-:1033B000070DEE4F0178BE6ADC5730D09242EBB772
-:1033C0002D5343B00ED3D4CA6AC82368572BD1CF2C
-:1033D00049995AA5DC887268E83C06DE8BD1562CE8
-:1033E000631E117C07BE246DE4209C87CFE1B22CC4
-:1033F00025AD5400FBAABD06C37C705EC19257DEAA
-:10340000967E259E43926AD311CE76A22B503F5AC8
-:1034100023A3FECBF12A71B037728C782E1CB13009
-:10342000C51B326EB39ED3C8AA972DE7C2C746AC60
-:10343000E54C1E3FC8B49DE7F85831F6C7AC78B2EA
-:10344000CF3723F0481AC09B010779B5E1F3D912B1
-:1034500028AD8379E6A81E843BA8B65480FC1A4B9D
-:103460001A9A81EECE1B5E1B9CD38ADBFA61DDA724
-:103470006932D1E8F81791C116E87703A7F3AE7C5B
-:10348000AB3E7E48910C7EBC10F8717CA348A2A68E
-:10349000F1210E19358D37A12BDD529ED89D6DA9D6
-:1034A0003F796B81E5FB94D80596EF17EE2CB59428
-:1034B000A7F6CEB1D4BF686FA5A55C12BFD2527F6C
-:1034C000FAA14596F28CFE7FB2D49F757499E5FB04
-:1034D000C503CB2DDF2F796F8DA57CE9E05D96FAD2
-:1034E00086BD6ED78B13B9DD72BE76BA0BEE89B08E
-:1034F000C465AD7E80DD8E57FEDAAAB5805CF33BF5
-:1035000091BE65D0E3B4BCE64EE64729E5210DE463
-:103510004A0E97A3D93EBDD40DFBA97E05F581ECDB
-:1035200065F564EF02B43FC66DA5F2683A589B6436
-:10353000E87B0AC8E5A66879A129DEE456BBF16CF0
-:103540005685BF1AF7378CF6B2AA93880FC6D3D820
-:10355000F96AEAA5423DB746DB9BE6B54F14F10890
-:10356000F420F5F71E31F97B23F977767FEE5CFDC9
-:10357000B77122F1E0B90221DC00CFE286572B219E
-:103580001D98FA75D701FD6E7286EB7B68BF9B0AAA
-:103590003C6C1F94FB755DF9BDC81783F932EA17BF
-:1035A000226BC5E6785C33D74329CAD3E85752BCAF
-:1035B000A3BC35F0BE411888B582DCB9D383F27064
-:1035C000DC7FBB5E03FE520A941C85BE0F1D70EAB1
-:1035D000B0BFB485E3B5402DA984905261B06E3F71
-:1035E0003C2769D4CEA0CFA2A2CDFBE179BB9BE55D
-:1035F000035F10FA7E25C812A59CD97FF23467AC10
-:1036000085F623A9148E247E85F194FC5BD9FE45B2
-:10361000A1FC2ED01B58F567E8142AD215CCF77000
-:10362000031D08F844FA7107BCA837DC70B815CA46
-:10363000B21083FD3FB04F611FAE227D2BAEBB6148
-:10364000B7823D1B617E6E33D057A0C6BADE29CA51
-:10365000F7104F6D028B7B77A569872BE9B85D99D1
-:1036600005E9106385B8489D49DEACE7FAF49F3D53
-:1036700022CF7363F2E6CFD0E78C84BD43E97FAB02
-:103680003801E0EB2620B7DCF77413A077B74A5770
-:1036900013EDFAA816467DCAECDDDB394C55054B17
-:1036A000707FFFE34029DAB7EEC67D49F1E71E904F
-:1036B000883E7D64BCFA276D437D4F0A9C1AD8155D
-:1036C0008D9A53EF49220FA6703F64DD38E33C2BFF
-:1036D000CBEFE9E2F830E2A14371461E4F33E28CB2
-:1036E000463FB767968E1DCD1E7753FF32628277B5
-:1036F0001D1D07F0D27EBAAE1AF12013761EF72FE9
-:10370000C53DEB719F95F9495338BE4B387EC7399B
-:1037100009FA09F3216E92015EED55D5C097469CDA
-:10372000E537606CD17AA12891585CCD61E82DF124
-:10373000CC4508B3E634F2C3D0E4657A8DFEDB07EE
-:10374000E7C6267459CF654EECB696276FB596A797
-:10375000C4AC656A351F01BB006C348C5BECB47E75
-:10376000AF33F603AAD83932858E7C86E95FCBBDAC
-:103770003884EB7F238F2DAF375E01E23577AD556F
-:10378000AF66733D9F6DD39FA53E09E30915870280
-:1037900007C17E34E23E473D9A259FCC88DFD8E5BD
-:1037A000B9E7ADCD847E41BF3CE262710C880F7FEA
-:1037B00096C7E325B93C5E328EC74BF258BCC42194
-:1037C00069AF2C1530FFF3B81B8D97868B589C86FC
-:1037D0009DE7FAA85A7E51D0D87811D378DF2C8A89
-:1037E0005ECED010CB827A46DCC4880BB87D7A25B9
-:1037F000F0EF86D06B0D07289D54FECA45A09FCBE5
-:10380000A4C3879A40BEE5C998B7ADCEBAED3B1EBA
-:103810008843C2775AAECCD7C6221FFCD481F1812F
-:103820004E4ED7C6394423CE92E2617691CB63D80F
-:1038300047510FCFCBF780BD7BE14E2AA32DFA8EE7
-:10384000C5F38CB8DDD45EEBF75E2264A8B0EFBFA1
-:10385000242632FB4AF75698F21A2FE0EB366D69B0
-:10386000FC81A5B4BC9BC44AE1BEB9124E1FA18322
-:10387000D6F3AF638880E79FC61C9142315A7FDA46
-:10388000F3D6EFC5B6F3B117D8CFCBDAF6857C12F5
-:103890003971231D6FA3D620801CDDB894DAF2B4F1
-:1038A0005CE8E1FB4593C824A0C3CB246F280EF845
-:1038B0007D43C2FD2DD7DB93DFBC11F4FAAB2CEFB7
-:1038C000489DA06D8638B2FA7309F5949A424A4A27
-:1038D000BC897DA47F3B1322B02F62C4B59EA2EBAE
-:1038E0000A7A6537F5CB0B1DE067AB58EEA57E393C
-:1038F000949FA57E393CF750BF1CDEFF90FAE5503F
-:10390000DE4BFD7278FE98FAE5F0FE79EA9743798E
-:10391000ADB7A212E262FDB43ED08BA7648F3281B4
-:10392000C2DBA93854A00FBB1CAAA8B85D594C49EA
-:10393000EA2B9D4FE3FE45E5652C4FBA72FDD3B8E7
-:103940007F618EAF99E38F89F8DA8060C4D720E475
-:10395000F93BBECF3014678BB038DBD9FBD18D7EFD
-:1039600030AE39AC1F1EDFFCF0CE5F3FD14A3FAD19
-:1039700098F14097A700CE6D34F0789E9117A35927
-:10398000F2EE57EC69C6BC1867D6910658D73D656C
-:103990005ECC17713A222AC85BBB3F67F871767B11
-:1039A000DA78DAF59B8FDB1546DC749383609E74BE
-:1039B00054A0F604D8174DB1F2771C23C7535FF714
-:1039C000F0F34336B930743E80C77D5C60CDD27968
-:1039D0003A058E0F9EB78EA2B180C5F5CC71554FBA
-:1039E000610C0FA57BBC3ADA7502B5F7D0FE532304
-:1039F0004188A375C0798024F38B7998FE6BCE72D1
-:103A0000A2BDD191C5F240AA72434168DF9A353315
-:103A1000683E1F609C5F38E89BA90C98FA5BE32B1B
-:103A20001855FF49545F6BA3E86BC9C5CEEFB4EEE0
-:103A3000BF588173195DDE65FDE047770503187F88
-:103A4000EFCB9A49064CFD4BC1D9787E43F2327BCD
-:103A5000580A2A680FCB30FFE2447DA3DE3D1E46A4
-:103A600027949D31BEE8F676633D971CC67B235CA8
-:103A7000015099F4A9B2FD384FA1481493BC30C647
-:103A8000FD570F93975DC51115E22C5D4159837366
-:103A9000205D5A29E2B995E3B935CFB0274268C70E
-:103AA000ECE17836FA69E57180D67A27DA73E1C6F7
-:103AB00034B52A03F37577C1BE5697B745817D4962
-:103AC0006756D9A8FDFE84CBEB91FB2D1953351D0C
-:103AD000FBDD03FD3A7DCB54E8D731C2B9A3C31C4B
-:103AE000CE2F6AB7DAF7F128B441733E8AFDE9E3D5
-:103AF000F6A7BDDD8AE20127ACFBBAC7ACE7941D8F
-:103B0000849DDB5AB97735F2F926B91FEDA84DA788
-:103B100085A4E7BF325204CE6F43FEBDC50ECAE195
-:103B2000FC94C3BF03A981BE28895BED96E987ACED
-:103B3000E519FDD6F2ACA3763B487F03ECA0C55C4B
-:103B4000EEF55379CF92610665C047381AAB00B8DD
-:103B5000EB486F33E44938789C7C31D77F0BB97ED2
-:103B600074A7B0786F4EBDC7E27F127ECF5F2EEF95
-:103B70003FAFEAE0EA3610B261C3AED2D06FCDBB40
-:103B8000E2D90A149736FBAA4EB79EE35F68B39F4B
-:103B9000EC765685DC83F9B8D9B6B886B19F0BF3BD
-:103BA00084FB0CECE39FEFB8467F908705F2CDB81D
-:103BB000E705EF15A6EDF3E4B810A278CA6E60E74A
-:103BC0007072D612BD27091DCF49617C310C6FD1AF
-:103BD0007988B7F9FC5DB697DDCF955D25C5343A98
-:103BE0007E767D2FDA038B6EA3F3413BFC0CE6C19E
-:103BF00018F5D3D37AF13CD2B61A81E7E712B46B49
-:103C00008C75DEE665E707EB2E156222B46F28C0DF
-:103C1000F111AE82C4FA523C1D637862F986D75422
-:103C20005BCF39D6D9EC17831E16DADEFFD6C3F682
-:103C3000C50D3EF8F0E2A393C651385608DDD529EC
-:103C400013CE5D5F9AF8C37106F8107E1FC3525FF2
-:103C5000308F57F9818AE73DD206B6134A92B529CB
-:103C6000245A3517E4CFE085022D5F9BF2BDF6AEF6
-:103C70004BE1F8F6E0D360E4B95C3FB8AC3A2F51C1
-:103C8000F6787E82E5001F07B616D97A9BEE7DA1F5
-:103C9000A8DBCEF3E337E864B304B9B5A2BA39942C
-:103CA0009F68970EED8451DA85C96639493BAFD1DB
-:103CB0008EA2AB03EE75E2F3F2F0EF2287C73CBEB3
-:103CC0000C7853352F9E635C20AB9097F165E1181B
-:103CD00073B67947C866C784E1ED28D8CD06FC6283
-:103CE00072F863F0DD3CBE6314F8FFD6F8385B7FF2
-:103CF0004EFEFDBCE1A3D55BC68C3C5F80CB81F75B
-:103D00000D695ED1D4CFFD7D7FC2B8B87C3D09413D
-:103D1000C84B76E82AECE715AB0FA27F2FA755A971
-:103D20006007ACA365B003D6F57663FCBBB8F08141
-:103D30002E20FAE2B887803C984AD4B4DDB4DFA9DB
-:103D4000AA0C27AB887CE94111E2E9E46A82792375
-:103D5000A97D1E763F50FE9C47C1DF4A4B53703F02
-:103D600023256DE6A3CCE865716603FE948A23954E
-:103D7000107F97EB484800B88418A900269B427032
-:103D80007FC3A3EFF9269C032032D34F78470EE878
-:103D9000551E6F1FCB48867439D53ACC5FF9998C84
-:103DA00071ACB170051825CAE2E2F4CD004F718400
-:103DB000762000FC2C5E36352286E2B4FFD213ACAE
-:103DC0001DF9053B3F427D9325CF79137835E4CA31
-:103DD000581E870F2EB5C6A9C9209D336D5FFA8B7B
-:103DE000458F439C62CC30F9CDFC760F8733F504C8
-:103DF0000943FF811AABDEF0F0FC6D8FEDFE988B6E
-:103E00007C0EEBBDCF76FFE1DE30EA011709294ECB
-:103E1000B42F96A2DD60F825DBA022D8E37984DDFB
-:103E2000B76B6F3F93B52741E6A7B83C44514AE9C9
-:103E3000F7E51E1DF30D5DB44CF12838899245DF7E
-:103E4000678B2CDED22C1019CA89F1E29867E052F8
-:103E5000AE6A03FB65BF321DEF4533FCEA5635847D
-:103E60007910A4A8D262371BF95E6B4A0AC6C2F762
-:103E7000D43143712715E8724D6621DAD1FE8C8169
-:103E80007F0639FB598A6F81027215F230E6C0B5A0
-:103E9000B4AE8E2895BBAE53394433D9672EB901E1
-:103EA000E36CAE53E32CEFE34DD673D4BA57AC8238
-:103EB00071B2BD1A3BBF43D436685741ACE7A55D2C
-:103EC000A7B22CF67AA2FF5CCBFB38B56BCCF7FB24
-:103ED0008CDC7F0AD18ACCFD4F18A1FF49B6FED5F4
-:103EE000A4FD27FACDB0F4DB2EB3F86B34E0497AA9
-:103EF000DF64A9B772BC77C6C8FB03255E16D7EC92
-:103F00000C36E0FE4025A18C4FE965DEE963123BEB
-:103F1000C74BD07E23B9D6FD814A4EC722A50C3CA3
-:103F200017205BEF2D2E27F67B8CAD76D111086E16
-:103F3000517A177D65FDB84FF0272F9EF31BC96E90
-:103F4000EE6F22189F2E4F19B81DF6C1AFF48E7375
-:103F5000B607319F19FDF925DEE90BF8BD9F2CAF9F
-:103F60003920225EC29563F19C96D14FD8492682B2
-:103F70005C0C8B2C0F027FE8F8FD99D98FAC4F8237
-:103F80003FFB39F73A5D282F34CDAB1FF20ACDE362
-:103F9000CDCFE9914CF308BBC80C1C8FDBBB43E3CE
-:103FA0008DF962E3BDCAE359C678750BACF3AB7308
-:103FB000AA38BF3ACEC7C678AFC2FC92E0F7ACE3EE
-:103FC000F1BCC9A1F12EB7CEAFCEA5E2FCEAF83D17
-:103FD000BB43E38DF962E319719D4E674303D0E162
-:103FE00048F11D23AE734DE72E4B5C874477CDAF70
-:103FF000282464B3C0E4C7F68DF33AC0FFFBB8666B
-:104000004D11EA156E5FE37DAA541F2F9419BCB5BC
-:10401000B9DE58B3098FDBA81CD127C3390985C085
-:1040200081323837A1E3398A203E1FA1F6BA8EF9D2
-:104030002545F8FD89A610967736CDC6A7D14FD174
-:104040006C76EFD794B94252BBFD752FB3DB37675F
-:10405000A9D77F1DF45B8587E5FBCEBE84E8263BB0
-:104060009A1AD6FBDDB03F741D29011D39692B83D7
-:104070003B50352606EBEF2939D8DF047150D9A122
-:1040800061BEAB96FCEF18BCEC65FEBCCBC5DA9309
-:104090004BD8FDA7B55C3F11A906F38F6A17A6613F
-:1040A0003EC2A2C5BA4FA5785B2C086F14727D077B
-:1040B000E79EAEE54B6DF71702A079E87A05742903
-:1040C00006F7C35D9B7B788940FB0DFBAE413F2328
-:1040D0004C1BA6D37EAEE5FAB6E26D17817804B923
-:1040E000CC89F26BF162AB5FB0D91D57C1CED95C00
-:1040F0001220CDB4DDA21AEB77978BF155D876FF5D
-:104100004BED59EE8331F26DEDF8B1C74D0F79F9F2
-:1041100079251E1F3D498AEFC7335F3C2FD7DEDE6E
-:1041200088833679997CEB7432F9309C0F183CEF18
-:104130007139B8ADE928C6D10CF8B2E59800F23E65
-:10414000A7FEA825EF9D22168D6A639F8048BB4B72
-:10415000500FDBE6B34DD89D35DA7D50D9447E77DC
-:10416000A088FFDD0261F8BCFFE0B5C6854F92B9BB
-:10417000AF149264FCC3E2C1B587A450B396C08B60
-:104180008187FF6B3EDA0278A7CF57E67F52C6FCE5
-:10419000C05CCBDF0730CE6F5D335496896CA2E7ED
-:1041A00085CB9D3AF357078B812E8F5C9A12627FE5
-:1041B000E782DB41F15F8960077DF9FEF53C4B5EEC
-:1041C00033EF77A4F5B2E7539ACE1B27EE3F80FC7E
-:1041D00097E65010ED814C91003F65433E9E9F7DD8
-:1041E0003F66B55B2DF978AD7DBB04881B6E87FCFF
-:1041F00044D339BB9CFA5EA11DECBBE6188B43C4CB
-:10420000693D0A776E7D5C682B4EE47DD9E57AEED8
-:104210006DD67CC1F6B98BD5DD1AE4D55476C3C50D
-:104220005FEBB6B23897517F28DEC5CF9F3A48037F
-:1042300081F3179297C59B83FC5E8EB3E5EF7E26D4
-:1042400046D5FC7CC8DB8D291574FE0F65442A7C9D
-:10425000B4DFAE4069430FD0A71CC23CEFA58D77F9
-:1042600087214EA866248F832FE5F6418D8FC5D315
-:10427000DE72C4F3206EFE8B8CCA1ADF8C24F51B11
-:10428000EFC5FECA47B86FFE261FA3CFED62727955
-:1042900070031FE72B2B44BC47C84D7C783ED55D8F
-:1042A000D83D1BF0B17DE5B650B27396D3D5C85753
-:1042B0007DA638ABBB90DD034048EFC530CF757F9E
-:1042C0007EB8F7193AEFF43F7B51CEA64BAC5F5363
-:1042D000FB9BCCF331DAEFFBD32FF1FCFC3E7EAF3E
-:1042E0003A89165C0E71F64D4619B600A09C3654FC
-:1042F000BE1CFCCA44F9C70BE0EF266D021AA5C428
-:10430000F7DEA6C3A887370984EBE95F2CC0FEF867
-:104310003DEE2FF2EFE5577EF0E8FDA00F663AD1B3
-:10432000DFDCC4ED1D03BEF77DEC9CC2FB1C5F23EC
-:10433000E1B393E3DB0BF80C9C173E3B93E1634145
-:1043400040EF023CBB21138482E0FEB3B216F2AD13
-:104350001F6A22E1AFD3396C0FEDD905678A68FB7C
-:10436000FB93ADC70F33F46E1FC2730CE7E72BF45A
-:10437000860015EB6611EC27091C5B475BD7A96922
-:104380004CCEC11D63F04CE7F6A5E4EA0F42FE8275
-:104390005AF66FB7AB54CE74E4F72F4916277EC296
-:1043A000CFECFEB411E2E22F70FC55A5877702DC5A
-:1043B0006DEA03E8EF39051286FAEB660F10C1D4F7
-:1043C000EE2D3F5B0F0A772FC0EDBC98DD4FEDA3BC
-:1043D000788704395F19837F9D768440FEBB2F78F0
-:1043E00004F35A7D6503C8EF280AB3195D813FA81D
-:1043F00070FBED854D6F2F00BA48970C3ABCBD138A
-:10440000E84C4A9491EE7AD259FB63F7DDDE09FE5F
-:10441000E20E276D037230DB89F68D7D7E8738BC16
-:1044200082AA1F80F90DC3A76BE051B86F60D34417
-:10443000764F4BB9D8BFE46B4097577AD13EA3EF84
-:104440009798CFDB9FE4F83AE963F6D5A63F29F8C1
-:10445000DDBE1E23D1EB6FBF38BDFE76047AFD9D15
-:104460008D5E3F21C9E9F57F46A0D777E1BD1D2FBD
-:10447000F6B244F4ADB0AF2C7FBE6027F4275F35B1
-:1044800077EB33F4297DBE318AAB19122CE79913EF
-:10449000F23EF209F46FDC2B60FC7DA2BB7C23F4BE
-:1044A0003B6BE6569063E7D0EF19C087BDDF5FF046
-:1044B0007ECBAFF44692DD93B0CBCFF2E37FE067E3
-:1044C000F546E29B5FF9597ECA487C13F70FF14D20
-:1044D000AA3FF3EC7C33C8EBD37518EB9F712E7CAD
-:1044E000F3203EDD858C6F70FE7386F30D2111E4A1
-:1044F000938E7CC61745FE159DD15C131F917BAD35
-:104500007C44EEB5F0D1A7FE7B918FECEDFD23DC72
-:104510000778D110FF87A7C13CF40BD536763E69EA
-:1045200000CFE1F690C13E17E609B3BC5C4F34AA58
-:1045300033F3A09FC0BDB3B378FB1DE0A3811F344C
-:1045400093C7B3E47EB2C8379C9F7D65F132F3FD1B
-:104550002E2FF3F6AED47039E0BD870C4C01FB6C06
-:10456000A4759ACFEB9F4ED7E7FB93D0F9D9F450BF
-:10457000BD9FE9A17ADE4FFA9F9506B04FEDFC5E34
-:10458000BEF2C77F7C62947E6EE2EBFF55DECF17F2
-:10459000E0FFAFFA93F02FE5FF1B601D4CFC5F2698
-:1045A0001424E5FF9BFC49E407E5FF9BFD7F5B7E50
-:1045B0005FE34FC2975701BF659E1DDFCF717C3F00
-:1045C000F725F1BD85E37B83FF0BCBDB0DC9F04500
-:1045D000F1BDF11CF1BD65047C3FE8C7F57F16E134
-:1045E000F7695E8C9777CD227BA09F24703C6CEEA0
-:1045F00047D1583F94A73E1128DD977FDE154A76B4
-:10460000FF116DF768B276F3FDAA917CBE1AFC87A4
-:10461000ED5779715F81EAC72793F1C797A0831F90
-:10462000F893C8FD7291C921C77D1777421CEF4BE3
-:10463000F4FF9364FDDFC9E5FAD9EC82D7385DD089
-:1046400079FF977FC670F9D7C3CF270B6AE4177E2F
-:104650008CDB0F5C01F26AC75DE902C4BB72F5B87E
-:10466000007E025EEA43E1980B97F8CC48B4DB2168
-:10467000C705B83F6747832AC07929537F6FFA334C
-:1046800047EECF0E0785EFD77E9477FA6FE0399F1C
-:10469000CFEF7CEDA47DE9FAEFFD4C6EFF0F3CF50A
-:1046A000C956B96DCC430C77B33CDBD9C9FF7EE565
-:1046B000019FCCF558F8B859FEBF3B4457ACBFF347
-:1046C000D53F14BECF387C7FC27E6DF0D9F17236F3
-:1046D0003827819E67FD49A999C3F594BD3FC3CF93
-:1046E00036D609AEC530C77DD4D421FD9D0AFD79EB
-:1046F000DB453C4755CBE549EDEC346EB7AB1EE8E6
-:104700007F3B8FC36FBFED810AD857EFB9472D01AB
-:104710001464D733BDA7DD360EE3ABD9BC5F3BFCD9
-:1047200043ED9DBD53E0EF42D071C7C1B8F3E692AF
-:1047300038F88DA9603760BC42C5BF5F9CEEEA0EB9
-:10474000427C769DD0BD6419E8D52BBCEC5C4C70E6
-:10475000F159EEC56CB1D02D09969DA57E33D65783
-:1047600053BAF1FE9473AEEFEA4E6A67CD4B150D66
-:104770007F62CEA8780D0630EE65E077F8386CFDE4
-:104780002AC20D02E0DB5726A8907AE7A37402F64E
-:104790009258D88F79535797317A21D42F19FDFE2B
-:1047A000950E03AEABFF167019F5461E8FD7B39D5D
-:1047B000B718FA3B635E26C7B0222D7F742823E921
-:1047C000BE82F1EC6C5275B80AF92355C37B193BD4
-:1047D00087F2BE43C145BEBF7FBDC4BC626CDFC9AA
-:1047E000567FE8FE91A082F61FFEFD0E131D75A4F4
-:1047F00032BF554A0BDF9D8AF23784F73FD2F2B7BA
-:10480000B0ACD0B20FCB4DB03E441D2A37E3F720F9
-:10481000AB4F54F59CF04EDB75613B79A89FF5D802
-:10482000AF7768DC8D580E0C95EFC3FAB9ACFEB9C2
-:104830008E33ECFE957E09E7FF89ACA7C2BEE97511
-:104840008D5FC3F8D2F58DB7E0B3AB49AD80389D2D
-:10485000710FC975D77F4D057FFAFA9BB6E0BEBED2
-:10486000D1FF42F03B80FF35B91AEC2567BE187EB8
-:10487000CC9BE0BF041C6D58AE95D97DFE0B679FA5
-:10488000D8D4668ADF29F077D121BF4633DD834152
-:1048900012F2F04941DF9D7A1EF43C7C9E841CA4F8
-:1048A000F4FB89B73016457AAE5493F18D31DF9120
-:1048B000FA37E63B92BC31F066BC5F57C8FF8EAE5C
-:1048C0002D7EE99E5885F93F0B050EA78FDF0BC99A
-:1048D000EBD5D2719E2D46BAD0806E6BB97F67D76B
-:1048E0000FC6B84F0A91D7013F1027BEA774387E74
-:1048F000CF156F46FF63235102F772798A09EE8B59
-:10490000057CC6BE3A936B0F7A8D7214934BC285A9
-:10491000DD28E7DC9A21F7989E54537A75B184FA22
-:1049200041A97FBD3C3805F2402341F8133EB4FC59
-:1049300012DCCF9C2EB132217F7DE920DA3FEA05DF
-:104940007093A3227FFED2A13CC28E2E62DCE6F3DE
-:1049500097209ED733542671385FD0E3192AEB4A4B
-:1049600090960B86CA5128EFE076DFE9D4CF5F6AD4
-:10497000437D16FE0CF8C790AB155CAEFEADE4E9C6
-:10498000FF02CED174B20080000000001F8B08002F
-:1049900000000000000BE57D0B7854D5B5F03E73A8
-:1049A000E695642699BC27BC721240A23C9C040286
-:1049B00041B14E78355E790CF51524C824E1119E7D
-:1049C00001A432ADB60C24202868AC2FEA833B2822
-:1049D000F66AAFF682C55BFE16F907410B2D62AC95
-:1049E000A8F840C3A3151F2511B44CAD2D77ADB564
-:1049F000F7CE9C733203C1B6FFDFFFFBC3D72EF7A0
-:104A000039FBECC75A6BAFB5F65A6BEF612CCC583B
-:104A10002E639BB566CFE8618C85BD565F7F8DB1F7
-:104A2000750CFE0A183B877F5733D6D76367AC9C5B
-:104A3000B1473283291EA83FE98E0EAB13EA398BAA
-:104A400072DC41176385DE2FC295F07DE128C63404
-:104A5000FCB65F166323A15DEF32C59E037010F3B1
-:104A6000288CDEADF240FD1C3763AD009935C2D80D
-:104A700020C61E70C9328C0760A024C2DAE079AA71
-:104A8000C6DF5BB00CCF55075BBC15CA6925CC1FD0
-:104A900081B2C7C1660400F6F258681E033DAA80C1
-:104AA0000A8D37C3DBCC34A8EFACB2F82300331047
-:104AB000BAE2F362AC99EA0DF4580932818FF13908
-:104AC000C1011E286F66AC6A2B8E8B450325308F83
-:104AD000D44B73B2EE825265897519832EFF7D0522
-:104AE0000BCCB43136D413B0637D57694E6A701065
-:104AF00095875079B525CC002F95CC1D518AE27849
-:104B00008191A706DCF171C4C7C3FB7F6B453030D0
-:104B1000D6D6F5BD84374E5503FA79485889788042
-:104B20007E4F55FFFE219CCE4267879D15033DFBBE
-:104B3000DD17602ACE47A3F7CEED53A23DE1FDA2DB
-:104B40001D4B188E77555AFA28A4A3B9DFB7BE7E3D
-:104B5000D81380F7297F7604B626E86F0EE219C6CF
-:104B60007B6845357D07CD6BD63CC666E0548A1917
-:104B700011B4CD899029E71C34BD43FDE0FD2D8C97
-:104B800033C3F581DA890CF05A57AD32B508BFEB63
-:104B9000ACCFCE41F996B6DA096C081442B613F8D8
-:104BA000DC09FFCE41BB419639DE038F6BC3FC3974
-:104BB000D587FFCD62BEF1B9F05DFD5AD3F3F7AFF3
-:104BC000F998A5E37BEB89B69278FB3755D706C6F3
-:104BD0008A7A67E8FF23849FEB35E647BA5DEF4B9F
-:104BE0008B84618A3704A606C696C4DB7BFBAFEADA
-:104BF0000CC48B191FDB05DF1D5A11088CEDDF1566
-:104C00001F7501C5EED12E8C97EEE2A1D65A3A3E21
-:104C100057EB8A07F3FC01631B10CFB300CF771566
-:104C200025C707D4237ABC3D15EAC154C6AB136C23
-:104C300016C043FD14853914C26F3AEB8BF5FC1393
-:104C4000C6E9C66BC6A3195FF52F325F14DAAD7FD4
-:104C5000D0ED030E67BF93F88902D286833CE155FD
-:104C6000F5F33C86E3F7C03F9CE7772A4A5FCE81A5
-:104C700071049B151FE3F33DA69F5F1D0B64441554
-:104C80009AF7B124743FA69FA7797CE6F1A7A0B05C
-:104C900002F9177ABFE89EBDBA7ACC1A1D1418CC57
-:104CA000D8331E77CE1FD2A03C84F9CEC1BAFA9277
-:104CB0008DCA188AEFFBE5D0FA36F3C5D915DA3D6F
-:104CC0007B6DFA75CEF96C46684A67BFD8BEC28262
-:104CD0009D650FE0393055DD7003FCF75BFBB25783
-:104CE000E3B3A55E553B918DF882F912BDFC8C496A
-:104CF000FE6208C3BB55C0DF14E6D45CD0CED5201D
-:104D0000A4CEC15C26F95334976E1EA75B942A94F7
-:104D1000A340BC8CEB07C7E76B1EF752AF9DFA03AD
-:104D20007EFC42CF8F66BCBC55DD3703E5C88138B9
-:104D30005E865C0C5E46E3620639E2C9665105E8B0
-:104D4000DCA138234FC0986A42B707C60E45BCB0F5
-:104D5000B01D44E7514F11D593F3B631F9B798A17F
-:104D60003CADB1B320CEEB7D1BABDEE64218ED5D72
-:104D7000A6935B27B22B8FA25C96E59AD00FA97DF4
-:104D80006044E243C9CFB7385D5195F3E1679D7C3C
-:104D900043F2ACC6F387814427760EE6A9662CD091
-:104DA00070DE6A5AFA1096C1D85AAC02F354330333
-:104DB0007F443DA9A6F58920FFA54E7D722DA7E36E
-:104DC000FD5537EAE89832EBE7616A5CCB32E03FA9
-:104DD0004DD0AF52D02FA5C469A61FC3751A2E613E
-:104DE00091A7148102289FEEE78FE0BA4DA63724E1
-:104DF0003D534AAC5FB5E9F99AB5103F4A3AB2BDA6
-:104E0000C33A70BD06BD567617BD2F21FC043D1276
-:104E10003F1D36D4273342B6D3FA76820533232B8F
-:104E2000F1BB750E1F3EABB36879580FF0E4413DFE
-:104E3000CE4A7C3E5C3F2C0CDF497E42BCA231A1B5
-:104E40006BBF0DE6505086ED81F4C4EFD6EAFA2927
-:104E5000EEDA6FE7BA32B76BFA4E55C17E203BC22D
-:104E6000E7F3E9E4779F4C6E3F9CF60EDB6A294E30
-:104E70008EBF3A67B6DF9A1D2F1F2B70564712E878
-:104E800001D99ED4E7596AD06BC1B9B127F7ED1D9E
-:104E9000857AD87319483276F7EAC7F7EDEBCD90EB
-:104EA0004518EB81D51FDFE77791DDC1CBC898307E
-:104EB000FECDA99D65BFD30BE5E2CE7218CB9BA0BA
-:104EC0003B7605C8EBFB1EDFD70CDF9F3DE220FDE4
-:104ED00075BA2A35828B273B34861D87715BC1CC1E
-:104EE000C90056031046E80CF5A4F92856C01CE08A
-:104EF0003B5BF32988EFC9991AF183556351370C4D
-:104F00002EDBEA53105F3FB2B30621372E9DA2B3CA
-:104F10005F266772BB43F6E370B2704A59BC5DC648
-:104F20007C2B518F582730D22BB0CEC96E93EB5BC0
-:104F3000B6332D93EBCFCEF579E1F53C2D33C17A25
-:104F40003E6059FCE10FD09EFD8DCA9E82A94CF7B0
-:104F50007E8F9EDF18AA2738353497E0AC4C6EBFA1
-:104F6000FC9E056765026CAD7E63FA72E0DFC6EDFC
-:104F70000E1FAAE585B77D7C4FB9867802BAE37724
-:104F8000B3EA1F2C87F7F6FE16B267D7F666D5C8C8
-:104F90004FF6950AD947EB347BD576800F6454DE03
-:104FA0008FEDC9713D903196CAAC4AB3209F2F75E1
-:104FB000723E3F7BE44E6F1DDA952E17AD17FBCA8C
-:104FC000A27B2D5066FB61DC0CE507233B4375702B
-:104FD000B83A93DBA9AB05BE7F20F8CC1943227306
-:104FE000BE5E0CFD3BAD618676B63366A5E7760501
-:104FF000C697804F657BCE182CD2A1D89FF97B3BFA
-:105000003DC779E1F76A3633D83DF7E0F7B908E5EF
-:1050100038D2F838B2CDEDA4F3E762FD99C771D26A
-:1050200033E647889F0732FCF767921DDE664379B7
-:105030007E8BEB37879521DD91C76D0ACAE3495F07
-:105040002BD142C05F4AA51A5955847ACD337118C5
-:10505000F001ABB4F9109FADFD72DCC5BAFE9F1232
-:10506000F47FDDEA71E33803E3C0AE26FE66B9D70C
-:10507000633BE3EA8773F90706974ECFBEAE6D59DF
-:105080005B8CF2376CA3FDD20C673882E3D3D96D09
-:10509000CA392E9735EBF0B8FD3763ACEA4F49EFCC
-:1050A0006ADFC136642FD97F529687A10CDF7D203D
-:1050B0008A1F8E3D73034EA38D79ECC57A7B1077E2
-:1050C0004BC3D1BEE17F334246BBCF6C17D655945C
-:1050D000BE026400BC44AA86219F5D6A213EEBAEFD
-:1050E000BDCCD87D9CCEE39A3CB8AF7A04E504EE03
-:1050F00007C71E1F4B72034C2B6C77F258D51385D4
-:10510000DAEB4316E687811FF4AB1105E676B0A40F
-:105110006DFFD588B70A9B467AAB846DB82E07DF42
-:105120000FF5209E03C20E81FA5CBF799D91FEF0BF
-:10513000ACD57FDC55AFE3BB8315C72FC5FD0AC8CF
-:10514000BD8644FCC4D84AE2EBBDDF4FA5763E7C69
-:1051500040893860FCE3D4AF5F1D81F6EC0F6C3EF4
-:105160008746D3B2205D27F898D8B8FA5DE3747605
-:10517000C07116184E7665E9914A07DAAFAB155A39
-:10518000A712FF3342467B33B818EC32ADAB7D0A31
-:105190008DD9919FBB6B9F9AEDABB399C2AE2A6339
-:1051A000657ABB2A999E92769595F9FF467287B5E6
-:1051B0005951EF4E820789E4C04D195CEE8E533F82
-:1051C00023FA9CAE5035C4D7C1D0272EDC8F1FFCEC
-:1051D0005AE5FB607FAEC18ECBC9E27E814D763051
-:1051E000C8E0BB4D3D9C9195D0D4EEEF5F96DF4675
-:1051F000F4D11E1E8574FC8D8DE470B2F1BA432A81
-:10520000EB078C3931A41094F42B0CA530AB4E3F36
-:1052100014B2C4E3EF9FC5C79F7B07B368D06F6626
-:1052200098F913ED8F653DD8178FB732AA1FCD843B
-:10523000F12DEA6721FE94FBE3145BD8DF13E66FE0
-:10524000DBB9248CFBE442181F8E4383F1A1BE2CF2
-:105250000AA551B938944DB06F289360BF504F7A6A
-:10526000DF3FD497E025A1227A3E203490CA25A1C1
-:10527000A1042F0D9512BC2C7425C181A037B1DE7D
-:10528000A05025C1C1A16BE9F990D075042F0F4D35
-:1052900021E80B4DA3F7A5A17A8265A15A7A3E3485
-:1052A000349FCAC342B752B93CB484E0F0D0ED0495
-:1052B00047849A0856845652BD91A1BBA97C45E803
-:1052C0007E825786EE23382AF428BD97764BAA585B
-:1052D0008F776B333DE8EF000ED7908F93ADBB997E
-:1052E000595C2F1DC8F44FC82A8FD7B35B408FBBC2
-:1052F000BAD60B6671BD9189744DD0DE3441AF537F
-:10530000BE630F0D6071BAADF39EDF9FC14A12EF0D
-:1053100037E2F281CFEFDA2C2EBF36595BFD2AF24D
-:10532000EF62E60BC3A389C35E5750BE6CD6AC5583
-:1053300089ECBB07B26CF4DD2399C1F95900D38A1B
-:105340004EEC45793239EC797534F2CBA09CDF8C88
-:1053500086F60A9B2DB4DDD7986737FAD7B4B18C9F
-:10536000E4A2F42B815D67D0A7EB055E18DBBAAF32
-:1053700098D653BF32AE7FDAAEC1F565FF7E31ED10
-:10538000DF37D9A38A15ED9BA5A0C374F6FFA63518
-:10539000753FC1F7F1F6EC34CEC2B5EC2534B18BD4
-:1053A0005AB4D12900FB6EF4BF94029FF48F0447D6
-:1053B000A74279C0D3E197105EBA35323A0DE0C00A
-:1053C0001DD19750DC0C8EB68D7641F9F27D6C0FB5
-:1053D0002EFFD2566D8C1BCA430FFBF7001BB0F299
-:1053E000B6E098740DC713694A87F16CFA000C3D5A
-:1053F00028577CD6A2C276284E7FB0E3D07E937425
-:10540000710F6B1D9B0DFFD96B99A754C5EFAD6D47
-:10541000299983BAD26733CE1BE7097AE4299857D2
-:105420002F7F54F1E8F864479622E9F018F29BF4D4
-:105430004B6E6ECE22BFE4E6544F2576D9318E797D
-:105440009ED0908FAD8427FBEA62F2C749BE03FC71
-:105450001AECD9F582EF3675DABB89F1BB43C8BFC8
-:105460007F15FC7E5BF07332FC3A9157465E781DE7
-:10547000EF17EB12D6F1CBC8DFC9EA9D12F837E37C
-:1054800079B385ED035D05FD029FF275C5D08FF6FA
-:10549000B1E0EF0BE1F5F8BF18DF462F8057A6E526
-:1054A000909C047EBD14FD63C9E48D5DEC67CCEF78
-:1054B000635DE51CF7DB7A40CEF54D2EE7F666F12D
-:1054C000E749E597903376937FC796CDFB1BEA09B2
-:1054D000A8D989FCD4DE1C839F7A82EAA94479C3C7
-:1054E0000630B2A3D30645C2B84F290C6B652A56C5
-:1054F00043A18C78EC5142FE8722B033AC407F68E8
-:105500002A8AD0A9792C75E87F97EBCD53EBD5AFDC
-:1055100037A9EFE3EB51F245D6E6BBB85F529B02E9
-:10552000F6CB5831EE783BDC0FB2E67B3D36DFA59B
-:1055300093839BBD5E2ACBFAC9F8B72E5BF06FF35D
-:105540002AC2A7735462BBE15BD9AAE0DB0E3FF22B
-:1055500079F85BCC83F64C66F331924F99209F1417
-:10556000924FBCFF5EA1D49F84A17C55769EF00330
-:1055700078526F74FFDFE3E72CB4A9703D8DF2EC35
-:1055800056314E037A48C3753A0AC63E0CF1652778
-:10559000BA6B8CD3511BC52268F702DEA2B86F0F1D
-:1055A0005BDCE467B2DB5BFCB89E993D93E63FD4DD
-:1055B000139C907D9E75E149D34A91A8D3EFFFD902
-:1055C000352EE0BF35459E542CDF0CE5F515D06F28
-:1055D000561B13E575AE91DFDCEF313DFBB9FDCD18
-:1055E000D0DFAE2CFF341C0FF0F57484FE011E2BAF
-:1055F000F9ABBDDDB307E4FA8CAF274FA95C4FB51B
-:1056000083481ECEC176657BC9EC9BA26C2EE74217
-:105610000226B36F24DF5FB47D23C63B3BFBFCEB6C
-:10562000FFAD7DF76FDCC274FEC61E0FB55A35F4B0
-:1056300067703F8DC5D94AEDB985BFD18FFE46E071
-:1056400003673F5EC6BF44FEE2E4788CD078A49F37
-:1056500051FA13D3055F31AB12413D9E5EE1B1D6E5
-:10566000517B6DEC3BD0DE83024F725DA3DC7A7E12
-:1056700010CAA52C2BEED7D19FE4CE8AB78FE58C2C
-:10568000B2B87C62621F77AB1873CB2A5F06BA9CF4
-:10569000C307B91FA5E5877C5D4EECC522AB504E14
-:1056A000F899E681FA294CFEF90DFEE4095F29CC50
-:1056B0000FE33FF0954A50E9C7A26ED8EF4DF429A9
-:1056C00051DC07DA2DCE08EAD2CA1E4E86F14D7B98
-:1056D000BA2582F111FB3185E6692F4B8BA0F01BB7
-:1056E000DBA32203E398670EEC710513D0FFA660DD
-:1056F000ADC1FF65C66367BDE92F7B108F8F5E204C
-:105700004EBB37BB334EBB0BF974D2CC8E66BB1687
-:105710008FD3CAF8638177FBBA4A54590BB87DDA44
-:10572000834556EAED2A5D1C741FB6F3683C0EDA19
-:105730007A893E0EDAD86327DABB3FEE8C83067F88
-:1057400085FAC49FBDB514F9F751DFF667EE457CC5
-:105750003A44BC62E81197867EFAF23DB9389F5709
-:105760004DE39750FAF1CCFBE0C3D9C6F8C219DF7C
-:10577000751951E2ADEC84EB5BFA17E57E18FD87F5
-:105780009E84EBD0886FD97F8DC2F7B5CCA670F917
-:1057900027F428C8974F480E4418E94DBF437902B3
-:1057A000F5CD19DF501FC53D93C81B391EC063FFDF
-:1057B00044F15FE82F619CD59AC3F5588D8DFB4D60
-:1057C0009525E58B715C356E97E2D0F9FB3B84BE85
-:1057D00033C785D48CAFCB83C2EF9D68FEE6F84E0D
-:1057E00087D017882FBD9FFC42F83A6C6BA1F8E177
-:1057F000E1592A5B09ED9C098EC86709BE97F05DE7
-:10580000E49BFE0073787F9DF44C122F3ABCA2817A
-:10581000E2CCE6785AE7FBDA946AD4DFD588475DB4
-:10582000BFE5395CCF4F129039829A07DEDBEB1E61
-:10583000F4308C7FF5FFA23CEC46BF58C70B18BF75
-:10584000603F7093BFA2BAF6CBF2958375F8AC6057
-:105850003C3EBBE7C71E0D9E57F76FCE0DBB92E3D4
-:105860007112B60578BA1B1F8C247F8C2F87FB37EB
-:10587000BBE58F6183785C88ED49A1F869CA9BAA72
-:105880000FED06EC97EB01EE4F5E26E226E6385E62
-:1058900075689141BEA4C51416D1C52FD2AC5BC9A1
-:1058A0003F9B16B3D273F37ACBCA81F53630BEDE96
-:1058B00024FE93D153E2DFFC7CB0C0FBE1DAB91ADD
-:1058C000FA0DEDA989EDE066514F96CDF908C9E2D0
-:1058D000EEB5627D9C098ECC477F55B53DDCBF3B64
-:1058E000EB5CE2E742790E37E7F0FD907BEA1B22A2
-:1058F0008EA736636B52AFA659CF1F8FF59BE2B1CF
-:1059000069C3BAC4F3FE29F1D81F9AE8D7DD78EC51
-:1059100078B11E2F94877293DD68F748789DA0E3D5
-:1059200099600A0B837CBCB552A53814F007E9C70F
-:10593000C30F2A646F466B1DA497EB6B53C83F5B84
-:105940005FAAD2FBFA0D2AE9CF28C88705201F5E7F
-:105950001572C2EC9FAD648A217E3E69588AA13CD3
-:1059600075D6FDAFAE40FF72854DC3FE0E6ADCDF1B
-:105970001CF6AB64BF421BBE28FAA71FB8CA87FA41
-:105980004CF2C341BF4AEB2D7C48F561B7ADC21F55
-:105990007D706D6904F35498128FD36B7DB1FD7ADD
-:1059A0008A03BFE3DD4871CE94BF3E1C08D0FE31B0
-:1059B000A89592DEE4F1D314B14EC7F4A8B811F55E
-:1059C000F887EB6D0CFD461FDE7186D673DB8AC54A
-:1059D000941721FDCBD23F6CF6339BFDCB5DFCCA07
-:1059E000267F72B27C86977212C7EBA5BC4AC61F8F
-:1059F00020B6F67F133926E5C7BB629E637A6CDC5E
-:105A0000B012F0903653253C48BE7CE7EB3B1F4775
-:105A1000399C02FCB18A213EFFE365DC87B0B94ABC
-:105A2000423F72AA94EB983F5112A7CBD4E0DCCE50
-:105A3000322EFF690D4B0C791F66BD925CAE9D5FE7
-:105A40006EADCFE1FE0AB3DE31AF877FB4DEA9AE23
-:105A50007DB004BFAFAE9D1541B8AE87B301E5AFD1
-:105A6000593E98F5C47526391BD70F2A8B0CD58F54
-:105A70005BA37A713D61A7F7675378BE43C8C9E15C
-:105A8000F2D4F427109E4DE1F90E61340AD14EFD97
-:105A9000202DD244FBF2C523904F42CCD716C679B5
-:105AA0007A53C98FD0D28BD753AF49E576F9DE4A06
-:105AB0009AAF2A0DF3E64A5A374D622E3FCE0EF6C4
-:105AC000C885F134F92D29185F18E3B6EE47D74B96
-:105AD000CB680B73B038BEE27921CCA3C0F7F44E8B
-:105AE000C1FD67A9D3DE97ECD4E25CE4CB1FC2FE14
-:105AF00010F8FEC00175FB6698EA01DFD08C447691
-:105B0000BA84E638F291EFBEDD07D7EDEF59703079
-:105B1000B6D75A5DBF01E3C38D3B548A2F4DBFED0D
-:105B20009D4BC8EE36C529D5746709FA539A94542B
-:105B30001FCA1389C7DD6E3BC999A62369B49F6844
-:105B40003AAA88B29BE4A1C4FB5EA857300C7395B7
-:105B5000DC243725FE615E57217E241D2A59F4C0BE
-:105B6000A8A2BF6B5E55E79F572F0FC90FE43335CF
-:105B70003E0FD56DA5F9B5B3541F8E2F24FC43EC11
-:105B8000FD34DAFF493A370A7E94745E24E8DCBEBD
-:105B9000F3CB7BAE84FA2DFE2C8A3AA8BD19E1A185
-:105BA000FD7D37F189C4839C37F0C574FDBCF7ECEB
-:105BB0001C7A3888DFA7A7521C5FDADD32EFC03CC1
-:105BC000FF1AB17F6FC8553AED5EF45FBC9A3DBADB
-:105BD00021B73C417D61EF02BEE763BF951EF645EC
-:105BE00084C5F779C9F21B96E72A179BDFB05CDF03
-:105BF0007F677EC337A7E7AA8BA167A3D5B556C930
-:105C000088E35BEE9B69496B5DD7BF79FD497A28D4
-:105C10003B77FF19E3F866B9B05C5DCC14E867CD5B
-:105C200060BE2ED91D4CA3FC20D37AB990BC01FADA
-:105C30003F8E74482677BA4BFFA7BBD2FFE9F3D15A
-:105C40007F4376E0A7F81EBBEA5946FBC267B18CDA
-:105C5000F2C45E4CFD11DF766432CA6793F931728B
-:105C60003C324FE65798B49AABCBC329F129A82709
-:105C7000BAC11FBFFA07F3C72BE7E78F28ADD3855B
-:105C800082FE0B655EC6F6F3E76574837E6F26A21F
-:105C9000DF72D5D7112CEA3EFDDABAD2AFEDFCF4B3
-:105CA0000B1E277D62675F90FD5E51EB457E19EA12
-:105CB000F14FC6B8F9AE9542EE1401FDE0FDCB39C7
-:105CC0002AC9B51FB1CB486E7FCB62A1F1B683BCA8
-:105CD0007E42E9D63CCF90DE61616B16B4BBFC3AE4
-:105CE00046F13DAFB652C172BE067A5AEBFE7CFF5A
-:105CF000D675BE7FBB80BC52F272893F97217F3A36
-:105D0000358FF57CF2CA9D67B413BAC18FEEBCDC47
-:105D10007F283F7AF32E42AF7603FFC5D85E323933
-:105D2000D1DD3C5058A7AC6756D7FE19F3515CAD96
-:105D300032DDC9F5F63645E8F1D22095DD4E121672
-:105D40007B859E3FBD9DBF574727B62B07E6651154
-:105D5000FE176E5D12B01AF249C2F4FC5EFF694F85
-:105D60003F15F3B45D349FEC89DC0F29E72FF3B4C2
-:105D7000D3C57CB27BF379671FE179ED125FE962ED
-:105D8000BF91516135EC2324DE96AB0105FDE89906
-:105D9000390CD324609F3048413F57A6DF585FE25B
-:105DA0003B97ADFF5CC594AF2AE3FB5CDCCF0CC135
-:105DB000F7BAE709F6AF409F12CC1FBB314FEC4F4B
-:105DC000ECCC8BFA88A935E7E523DDFE647A5E37F3
-:105DD000F627F57932DE6ED47B5B5358423FC3E73A
-:105DE000623D80BD42FE6655E8B9B16D4594EFB2A3
-:105DF000D4AD91FF41557DCE09455DBFCFF4C3F2CF
-:105E0000D6E123BB2A9569BA79E706B20CE5FCEA2C
-:105E10001E86FA05C162C3FB9E0D9719DEF75E5C14
-:105E200066281786AE30D42F02C4EACB7DD7FE9BFE
-:105E3000A17EFF96EF18CA0336DE6CA87F69A4CE58
-:105E4000F07EE0D3F30CEF076F5D6A285FBEE3FBE3
-:105E500086FA4DC28F6CC6CBF63C6E173559B91C0D
-:105E60005AE92A23FF6693CBE8DFBC47D4ABCC18B2
-:105E700055827EF5A663A52588EFBDE957909F3D25
-:105E8000195F98E55A32796A7EFE9CA0F7A997ECD3
-:105E900016E4EB457B60DD5E0E65D7BB6B704EEBA9
-:105EA00006F1F8AC8DF17C2119AF91DF77C66BACB0
-:105EB0003EEEAF4D77B1BB12F0C53D795A427FAA95
-:105EC000E4A3647893FC7821BCBD20EAFDBD787B17
-:105ED0005FE1F9AE7A7DB02DC1B84E897505FAE65D
-:105EE000B53C6E0F0D4B254BDE43EBF162F5811C8B
-:105EF00007E8837751BF98F3744F55BF31FB610DAD
-:105F0000EBCFE6F52DBE12A44B327FFAA9BC2EFED4
-:105F1000F406EE4F4F35E0ED7DB9DE4D7EBDA6F4C3
-:105F2000AFC89FDE64F79574C79FFE3E7C8BFDBDB6
-:105F30008074CED5D157F8E393EDA3428CEDC7F32F
-:105F400010CC65D5F4FBA664FB6329CF617F5C822E
-:105F500071DA16DC7F2909F5A035BF9CF6CFA40FB6
-:105F60005A400F3AC84FC0F66B505E3EC6C2EED2E2
-:105F7000E2F396F6BC83F99C7695E89A9A8F78F9C5
-:105F8000215B96A2FE43F699B9F917A1E7D985E3FB
-:105F90007D64A74D84F9AFD2EDAF257ECCF13D896C
-:105FA0009F893E1EBF5B0DFA11E37BBB73B99E5EFA
-:105FB0000DFB6FC4A3273BE0ED83F63C3C7F02C999
-:105FC000913B9CD68FC4AB39CED75DB933229FF3BA
-:105FD000A3CE8E1B919FC03F133FAFC2E7BF54ECCF
-:105FE0009FC7A983B6A21FF374CC4E785319CFBBB9
-:105FF0006CDC676311A223CF5F9674B4C5D6B4A2DC
-:106000007EB63173BEB29681F3B7EDE3E7C4580EA6
-:106010007F1F66CE9568F7645418F557A6DFA8BFB2
-:10602000B2ABB24CFACCA8BFF2AB8DFAAB2068D4BD
-:106030005F3D1BCA4CFACCA8BF0A43A34DFACCA8BB
-:10604000BFFAAEFD8E499F19F5D7808D46FD756963
-:10605000C4A8BF063EBDD4A4CF8CFAEBF21DAB0C96
-:10606000EF4BA37719DE0FDDF72343B9BCF51143DE
-:10607000FD39FB7F4E793D230E3F61A837B2EDA776
-:10608000867A80F056CCFF9E492461ECCA93CF1BE0
-:10609000DECF14F6DA551DBF34B4C35A781E771814
-:1060A000FE21BD3E62413B1A2956D6F14A4FA0EB74
-:1060B000A288E28B42B5B93BB60DC7717CFAC135F7
-:1060C000FBB09D391B8DF9DF7323C672232BCE40A5
-:1060D000B9D0087C11013E998F79E13AF9369F2DAC
-:1060E00016E702BBC76773F65FC7289F34EC6FC51E
-:1060F000BC77394FC96F7EC16F727C72BEF3C1FE2F
-:106100008B6AF179FAE11FDF6FB6D9916F67EF50B3
-:10611000D8234AD7F934ECBC6F4DCF04F332CFC348
-:106120006C87FE24DF183F19A7BA285E70FA90EA40
-:10613000E3FE46E33A5CBA9FC709963EA790BFCEFE
-:106140008C0F699F26C38B1AE6FB86C61C1689E84E
-:10615000D69F26F0E1F01AD7DF69FC0F1CCF636AE7
-:1061600004F38D52B45433BF0D8FB2AE784E2B3141
-:10617000AE53339EDDBE1E09F94A837F388ED9E2C5
-:10618000FCA199AFCC785FB4E33E3BCAC38BC5FB9F
-:106190009BF989E312A0ED86D913E4D749BCC2BEAE
-:1061A000FD3DD423C9F6B31FE55FF47EF6A3FC7F63
-:1061B000EC7EF6F4F9F45C3BFADBC0BE34FBD9CCE0
-:1061C0007A58D9B9E7CF4A3AF9B5DB1CB8EE823E26
-:1061D00027CF8331E9C99212839EECDCF71E536806
-:1061E000DFBB2DC3AF78613CAF64F82D08A766F81C
-:1061F00055AF6EBE4D80173AF7037A6A5B023BF1EA
-:106200006AAFB48F02E437595DC9EB9BEB0DF0F236
-:106210007342BB73877BC9FE3C5AEA25FBD33DFC26
-:10622000BCF6E7BD224E7437C621FBC7F383368820
-:10623000780D2C3B3FD26DB52DE0D5E70FA77A3313
-:10624000499FA68F7CBE15F3A89B3C168FA221E424
-:10625000F9DCCD2E6BD516F15D8EE13B3E4E15F18E
-:106260000D78B5BAAC5FE9F9F66A2FE3E7AF92CCE7
-:10627000F36A2F8F13DB587003DA43323E6C3B56C0
-:10628000E94479D7C4FC1E2E277D1E7DFE878DF143
-:1062900078F068111F96CF55CF37CBC3FA6D46F013
-:1062A0005BDE047958CB32FC57237D43D6B003ED37
-:1062B000CE9033F1BE789C57C4EDC47CC10025BE9E
-:1062C000A271A8171FFF017B3380FD2E57C39427AF
-:1062D000D9E41E5E127475DFCF35CDDBC53E9AE67C
-:1062E0003D8F7D04F6E9643C47E6CFE861A56D8704
-:1062F000D55782F85E8BFF3D92FCB475889F2E794E
-:10630000AFE21C2EECE3CE9BC72BDBD995E59FEBD0
-:10631000E5F986F3B13DFF004FB3AA6B27FD02ED0F
-:10632000483F4737FC56DFF326F05B2D577D27515A
-:10633000BF77178FCDDE2EFEC266EF79FC85678FA3
-:106340000CC8C078B6F47799EBC97391B2BC36D358
-:10635000D8FF9A325EBE57D0EF77E27E8A27C538E3
-:106360009CA6F3A2CE098CEEE990E74C653B4F7AF0
-:10637000DD54FF8EECD14FE278D71429B40F5D9332
-:10638000A918F6A3B7782B9F447A3C2EFA7B52F0DB
-:10639000EFE662EECF31E761CE11F5E7784713C43F
-:1063A00073AD28C7ECAA9A108F4F7BF9F8274343A7
-:1063B000941F27FC6EF50F2A62FF64BC1701D6F903
-:1063C0005B69207F8EAFB7D1B9D759AA6B0DF26345
-:1063D000B27B0E6A070528FFE9EF3D3F86F84CCBFC
-:1063E000EAAA57A3DE4E7BC67791E7C87ECDF1D3EC
-:1063F000BD787F5B2AE7D30EB78BFCE6E67A4705CC
-:10640000FDD70BBF06CA75D42F592A5B9C48CF1CF9
-:106410001572F59B9F6BE6F77964BB5CF49DF95CA4
-:10642000739BBD6D753E8EF72AC587E717F26B3CEF
-:10643000BBF373F01CA3463EBE35452CBD02DF976F
-:106440005AE87DE6F59E3536CCFBD61866EE331B52
-:10645000F4E3867E520A781C677DF8BADDF9502F86
-:1064600043EB60C583E8BCF7782FAEDB6A9E3F6FD5
-:106470009EDF57021FAED5B0BF407C6889F3D0BF06
-:1064800012780079F367A447A5C6B6F373593C0F99
-:1064900016D992F2157D3C5F3B0DF39DFA7279831C
-:1064A000EFBFCE1A730EBF93EB4B15F8369FE74E36
-:1064B00029B8B8F3DC936B128FB75F01E787C31974
-:1064C000818C02E877F2A895DC1FF6F5B973EA70C3
-:1064D000348EF93A81EF19FA2B5272B81C4ED1342E
-:1064E00092CBCCA3509EAB53F3356039C57585472D
-:1064F000453BD9C1E3926CA685E1FD2A63443BFE8E
-:106500006AA6FCA184FB65B99CB5B23F48FE57055D
-:106510007286A39EE57F603FAD4F83F98C711DA00D
-:10652000F8644ABFC59578AEE1E519BC8D1F2539E1
-:106530003720CFBB779EEB0F470E18CEF5DB1E3D05
-:106540006038D7CF1E3DF0F79CEBAF2C78F4C03FFE
-:10655000F35CBF946787D5E0E1DB01FF370053852B
-:10656000CA105A590DD1DB4B78BB5EE039FC15E0FF
-:10657000D919C7F30D3BF713FE0EDB60DCD0BF6DFE
-:106580003447B5EDFB199126928B11EAF74667CB9C
-:1065900038DC77B6DB3B8660BFED2FBEDD3B0CF20F
-:1065A000E4C80FCEB819F0DF87D60E373E3F79C763
-:1065B0001B6EC4D7913B54B2D7E85CB42E1FA95EC2
-:1065C000F0D54B05819B91AF66ACF8EB70BD3DCE2D
-:1065D00042B9A47FE746544ABD92F26FFED3698266
-:1065E000E97879E1D66C4359EAE5858EC4E7D41F92
-:1065F00011EB62EEB39BED3D35EC3FB800FB3F295C
-:10660000F21B4E6E77D33E4C8EA7EED9523BEE3B3B
-:106610003FDCE96051F203B7DA18F9B3FC13943C9C
-:10662000BCC788FF99C7F9CAAE346A6FD6832AF906
-:106630009D6AA1AF10E035B8732EDF079BE631EB02
-:1066400088361EE5D5AC750A0B6BBCFE1D787F46FF
-:10665000E84E8AC398E769D62F7392DC9F3367E7C9
-:10666000DDF4FD4CE6BF1BEDD9592DE6F7D77C8450
-:106670004C3EE702F19C7B0B84DE19CE469CEB4B33
-:10668000F1A38CC1DA85F5CEC9157C917EB2C249E1
-:10669000F0B3151E823717703E9EBF63F72B3D691E
-:1066A00099B70E47BDF4D6BEFAB49BB5B8DD3D7CB4
-:1066B000F3AD7B1EA5AAC6FCCC1A81F711222F735D
-:1066C0008E38F7507EF8FC799935888F215DC72B7D
-:1066D000EDEC1A93DF57DADD667C9CDE37260DF988
-:1066E000E3F902B1CF1D017851FF7EBC24FB6EA1FE
-:1066F000CAEF4D333F97EBE866C1D733B74C59D358
-:1067000003FA6F7AF1A33E6DC4A7DC7F512EF055DA
-:10671000EE5AD38AF32F6726BF61981D623A7E0630
-:106720007E5251EF98F956F2133BC4BF770ABF4629
-:1067300027BFEEDC40F8957C85271D2C68C381E5DA
-:1067400062A9B8F03D57B35A8CE553B6B63E284F10
-:10675000E698FC0DA794C4FBB7BD05C51C0F9A7F36
-:106760003CE65FCC628135DC3FCFEFC739696D799C
-:10677000E5765CE75BF83A5BF88BE7FE1BE5D7BC98
-:10678000FF7A301DE5D7C7D6963CEC6FC153ABD32B
-:10679000FD28C7ACE174FCFEE3889AF01C71510F30
-:1067A00045E6EBBB304F6D11B11AFC6F667812CA2B
-:1067B000CF3F3D65F3A01FB6F16947D401F858B447
-:1067C0009DE311CA4779F94EC257E30EE3BA9CF72D
-:1067D0001F0FE669E40F08F714F8EB89227CD11645
-:1067E0001BE5B52E3AA4FAB09B46D641F3337F8F12
-:1067F000E38801DD1AB7AAB5F68CAEEFC112B2E399
-:106800007A6BDCCEE9D9B89DD3ABD164873608B9B1
-:106810006DE6FFCC1E46BE07FC905F4DE6DBB2087E
-:1068200097DF4DCF3C3CE4288CEFB32DBF4D57068E
-:10683000C5F99F615628E0EDF4D6FA19F6F3DCD7D6
-:10684000734AAC934EBD20F490B60306960FC59DD7
-:106850001C2EB045D3AF04BC2CD86CF385E1F1827B
-:10686000E754BF0BEDA8771C74FFC4FCE75E7EEB1A
-:106870000A18DFFC6DB69C097C1A2E94DF925E8D9F
-:10688000C8E76571FACCFBF9CB76CCD3C4E7776463
-:10689000C5E9347FDB6E3BE67D9AF13966EB6E3BF2
-:1068A0005F6F267A6D3D3A1EF576D33367EDC80FDC
-:1068B0001FEF52587E51D7EF1B36BF9C8E7206F1E8
-:1068C00084FA45D2AD938E5DE8179DF4CB6154CF29
-:1068D00083719E0BD1F1733C83504EFCFEB35FC2BB
-:1068E000381ADE75F8100F0D3FBB351DE7F39175B3
-:1068F00031E7FBC757E7A1DE6EB085F33C04F9F33F
-:10690000864DDF257E9CF3FA77F97D4ECC5F80EBD8
-:1069100019E65B80F39CF5D80D34CFD92C48FCD810
-:10692000F038BFDFF04B2BAB4AB41F784CAC9B8FD9
-:106930009E70D0E6E1233BE3F785FC4E15F7612D11
-:10694000217BE5BB62CE20A1A9FCA553D0AB878CEF
-:10695000FB73F9D6286A356EB993E4DB27BDFDF9E0
-:10696000B8FE010F46FFECEBE3F2855CA47B5DE82B
-:106970003BE0BF31F81CEBB7DAFC29430CDF89FCA4
-:106980005BDEFF32D13F8C3B15FD7C1FE519F7B96B
-:1069900012FEB687F4ABB156A6E7B3647260CB3A89
-:1069A000E2AF2F0E7139B32832A58ADEB7DAA2F929
-:1069B000F83EB2FB7A85E404D82189D6F9169B58B3
-:1069C000E7C6F7304EABA2C7EF2E7E7E4FF2CBEC80
-:1069D00007A0BE6E5DC7F9C71E7F5E145FAF327F32
-:1069E000638EC99E93D02C271E32C909F93D7B2C9A
-:1069F00037E1F988B87C0813FE16D8223F7904D70E
-:106A0000F53B0E3A17B9E0391BDDEFF3E9B37BDE56
-:106A1000BA19F8FFD3AD723D1BE5AF793D373C7F26
-:106A2000034BB49E3FCD09B084EB199E275CCF3950
-:106A3000FCBCC1FF29F93B2789FCDDDD43D8633A63
-:106A4000BBE34A287EF2D3F985B43F33E157E2D560
-:106A50002C4FABD158C8ED2A4FE1EF10D3E153E2F0
-:106A600051F2E9BCFF5C48FD74F2B3E457C9CF9D15
-:106A7000FC6A9EB7119FE6F7CDB877CA8DD3DFB613
-:106A80000AF6E518AF7D51A5FCBC76AD233D0BFAA7
-:106A90005D2DF27BDA3DA29CC9CB1DB9F635284F9E
-:106AA000E4F38E149EEFD01EE848CFD4ED078EEEAF
-:106AB00054D3F13C405B24715E06656CE4E2E9D698
-:106AC00064EF57D27A684FE5FEBEF654EEE71BA797
-:106AD000BAFA84707FD7C2E34B3357DE948EFBFB48
-:106AE000F69D7D2757E37E60BFCA738EC27E6B0121
-:106AF000E0B79E4F9D9D64E18746A1FDBE73FE04F5
-:106B00006C67E67A235E66BBB6D8B19D2FD91D04AB
-:106B1000673F608BF309FC6F1EE66B219F3F667A2F
-:106B2000BEF35AE2AB7926BE0A225F25384FE2EA6D
-:106B300029F8AA9495F2FDB6888F09B9374E1D340D
-:106B4000B91AF329F7F1F31EA777AA6C0DCEF759FE
-:106B5000112F0BE712BF2E02FED6FB4D3F43BE1B8B
-:106B6000905CCF7FF6C291E1B7439505FFFDDE90C3
-:106B700047017EF6DFEF5CF22B2CFFE2ED3EEFB13A
-:106B8000AEF5C7ECFAF32D94D7B9CB41F79AB6EF2F
-:106B9000FA759FDBB1FC4B07DD2FDABE8AEFB3C37A
-:106BA000BBDCA4FFDB7B737BB1E9C5B343DA487F71
-:106BB000F17B8347F4E4E73E4EEFFCCB070AE6F3B4
-:106BC000ED8459A17C14FBB7C65FA6D03EBDFDC5C0
-:106BD000B386FDE9DF3B9F45E2DC55BB9B55E339BE
-:106BE000E9F64C7E4EB5F157239FC473970BB7EF70
-:106BF000B6D7C3FB31FFFBAF43500EB53FCFED0E11
-:106C0000B08737311F63A31FBD67830DE8770A6D17
-:106C1000445833EF3D7A7062785022BC703CB40324
-:106C20001E705E809706949FC9F031B5273F7FFCA8
-:106C3000AF878FCF6FC1FE17EC1C41F70CC7F1A2D5
-:106C4000F8F97337E57BC0FCF9F35D6787A01D7524
-:106C5000A1F92EFFFF6CBE0FFECBCE97F37BEF9E0C
-:106C60005C1F99F9BE2B5FFFE2362AFFCCEDA3F142
-:106C70007673BDBFF02FBBDEFF39F47EE35F76BED7
-:106C800017A2F77E416FB707E332ED2FFEB50FBBBA
-:106C900088799FFE7F74DE9D768FC5E71C06E37BB7
-:106CA00097456EA85492E78F16F632EE33E43DDC3A
-:106CB000937266931D31C9CFFD314DAC6C1F9EB3ED
-:106CC0000BFB558A5F50F20EE0A1F5FAD208E58978
-:106CD00059C3FD1FC2BCB11B17FAF87D65C6FDD7AD
-:106CE000A4BCAA2AB4E70EAE847141BD836E8BA703
-:106CF00009A630D9AF92FD0790ECBE37475F4B79BC
-:106D000028932B8CFB909B4DFB899BAA8DEF6F6486
-:106D10004FE462BEDF8D0D36CA4FBAC154FFAF3D9E
-:106D20003D44D79BD8E2D5DC9F7371789A2CF0D480
-:106D3000150FE7C75B173C89FD26E50E695DF1E697
-:106D400008F2FDA7035E087B4BE4E52DED163E99A6
-:106D5000D8973A44D712BF0E3FBF7754D72EE1459C
-:106D6000E2FD62F12DE964C6BBC4AFC49B990EC5B8
-:106D700078DE53679FC7A1F15E6D26ECC6499D760C
-:106D8000A38BF0F8DA167E5EE2B58AFAF5A5587E96
-:106D900096DF07FFE5A8A1CC09F33D68633B282EE9
-:106DA000E4F76B9EE1F1FC19A5E2D7149FC0FC4506
-:106DB000FD7E15F317F5F3C2FC457D19F317F5F5C4
-:106DC000317F51FF1EF317F5EF317F515FC6FC4550
-:106DD0007D7DCC5FD497317F515F1FF317F565CC74
-:106DE0005FD4D7C7FC45FD7BCC5FD4BFC7FC457DD6
-:106DF00019F317F5F5317F51FF1EF317F5EF317FCA
-:106E0000515FC6FC457D7DCC5BD4BFC7BC45FD7BD7
-:106E1000CC53D497313F515FFFEAD84B867225FBA4
-:106E2000ADA1FE18E71B86F238CF7B86FADFF61E8F
-:106E300037BCBF46FBD4F05ED2FFDA923386E71848
-:106E4000FB080FC77D0CFF9BE8FB8BA11D2B0B5094
-:106E50009CD4CE161374A2BF17602ADB4AD005CB90
-:106E60001CE18901C1677A21BF6E0AAF41E63A3859
-:106E7000F26C1F94FFAF8DBA8EFB25447C6132FE0D
-:106E8000A7064C9CF6752FDCE7CAF8697A4C65D1E9
-:106E9000A1C0873185A02796C6A2D9C087B1148228
-:106EA00059B16C7A9E1DCB249813EB49CF736305BF
-:106EB00004F3627D09E6C78A087A63030916C42EC3
-:106EC00025D8233694BEEB192B25D82B76253DEFFC
-:106ED0001D1B49B04F6C0C3D2F8C5512D462D7123C
-:106EE0002C8A5D43B038761DD5EB1B9B42B05F6C9E
-:106EF0001A3DEF1F9B4AF092583DC101B15A8225BD
-:106F0000B1F9042F8DCD257859EC56FA6E606C09D5
-:106F1000C141B1DBE9F9E0D8F7080E893511BC3C75
-:106F2000B692A02F7637D52B8DAD235816BB9F9EDA
-:106F30000F8DDD477058EC517A5E1EFB31C1E1B117
-:106F400027098E886D265811FB4F822363CF10BC12
-:106F500022F673FAEECAD83682A362BFA2E757C5FB
-:106F6000FE17C16FC5F6D0F3AB63BB09FA63BFA5CB
-:106F7000E795B1FD0447C7DEA0E76362AF131C1BB2
-:106F80007B8F9E8F8BBD43707CEC38C16FC78E1298
-:106F9000AC8A7D4AF09AD8C704FF2D7686BEBB36F0
-:106FA000F639C109B1BFD0F389B13F13ECDCFF8FD3
-:106FB0004AFABB029673B87F766575EBBEB2FBD218
-:106FC000D2492E4EBA83CBC587D34EED253939D25F
-:106FD000A13948F86D34C4BBE8472460DFB77BE4CF
-:106FE00047BDD0DE595379FCFD5B519F2D7130A117
-:106FF000CF4C72F76B97F07732CC479C2EF8FAB5EE
-:107000008A3DB96847AD296B5B807E930D456D3530
-:1070100008F37A73BFAC5BC09CDE3C5FE12F03B822
-:10702000FEAD59D29FFFBE404EF7E6775D2FFE9D25
-:10703000ACFF751F0FD717AE8E3E745EAF9BED741D
-:10704000B7DE85F2B062BD8297F5CE3DDFF9C16E45
-:10705000B733B477827CAE6FD0CEA8EEB4F3A1A0E4
-:10706000FB63BD037E1C3FB3FA87E0FBD1AB0A5440
-:10707000FC5D95DAF58A07F9A5BEB9743CD2B58CEA
-:10708000F9C92F393D493ED96C41D7BAC53686FE7C
-:10709000C93A8D917FB86E3BCF43467FEA44E09773
-:1070A00006C12F0BD77D4E7EA786C57378DE53842D
-:1070B000FBA7E4EFD8CC6FD9FC0ABAF5BE64072869
-:1070C0003F7EFED346FF55A3F04F2DDC6A7ABEF813
-:1070D000DB09FD9E66BFD48CDEC22FE5E3794F4C01
-:1070E000ED45F3FE12E68DF924C1DBDC4ED41B80A6
-:1070F0000F8AC3483C48BFA7C407EB7AEE82F25719
-:107100004FEFEB4F7972A7352D1FEB05D3F9EF59F0
-:1071100029D6E0087C0E78A47C968E9569940F752C
-:1071200014F4808689579EE008BC3FAEEDDDDE4C4E
-:10713000DC5F698C4738D7539E782D8C01F3526AF7
-:107140009FCAA6739BD0DE901DE8D77CCA46F9483B
-:1071500061B6D4CB2ABAC62B02AB6DC417753B32CD
-:10716000797E5AD87F08CF1548BA1C6DEE3B1EF3C6
-:107170009AEAD6169592BB6E878DEC43199795F4D3
-:10718000EA9ABFCDF3051A59640DA62E01BD4E240F
-:10719000A457CB6EA22BD0ED4412BA9D381FDD1E32
-:1071A00032D10DFDD437E1CB3BB2693DD7AC8AF685
-:1071B0005FACE34FB3FF9FCDBC82EE3D91F9CF555D
-:1071C0003DE4EF8CF9F290BE67D69713DDCCF4AABC
-:1071D000FA5B3DD185BDEBA67B87A7F76533BE0380
-:1071E000CF6708BFE7F4A66BC8FEFEAFDE7C5FF09A
-:1071F000DA0ACCFD64ECF5154EE607E3FB8D151EAF
-:107200002ABFB9C24BE5B7576804DF595142F08431
-:107210009DE715C9F5058C40F97D2FF4E671A91796
-:107220007ACBB8F0322FFAB9ABFEF64639E619E55B
-:1072300086DF9B34EE2AB2DB0DF922D5D71BF34152
-:10724000DA6C22DF6C9DE2C3FB64EA02571AEAB3F0
-:1072500092A1F132EA1F91BF52B73693EEB19B3A39
-:1072600021DB50FFC6B53D0DE5577B6B34BE29557C
-:107270007D0DCF6FAE196828D78ADF8F605A05ADB4
-:107280001B19FF02CDCDE9E2E175BF583C227F39E1
-:10729000F4FFC5011BBD37D3E3843D4CFBF9F0136C
-:1072A0000E1FC6F74EE2F937289F7C53A5FCA29328
-:1072B0003616F680883FA9B06684CCCAD7D59787A2
-:1072C000F9BAAAFA9BCA701FCF7EEAA0F860FD4601
-:1072D0008585F16E860EC03CF4BBEC1907CD7BE6CC
-:1072E000469505E97C95B615E3E4CB9E1AE0C3F814
-:1072F000E8F4BED1DE78DEB0E385141F9EFBAA6FF2
-:10730000E3DF9F84FD7926E6472965148FF8E3C4FF
-:1073100096D916CCB7530FE4E27AFDE3F3FC77CDB0
-:10732000E62E7973B807F03CEF95AD6F55403F27D7
-:107330005A54EAF7D3A71D9B555AF7FE7CBCDF369B
-:107340003EEF08F929C6F708FC09E5FB27B32343FC
-:1073500048FEDCC1FDE35DF103F3457A23BFEAE4B7
-:10736000595CBFF1F81B08A1029413F5361FC565DF
-:107370004FACB751BC10F401E51B9C68C9B670391D
-:10738000F43CF15D9D55B3EBFBAD5BAFFAF9EF63F8
-:1073900068761C2FBB4F0DB21158E6F911E1B54AC2
-:1073A00090C77F8CF4BD75C9083A176DCEE392F093
-:1073B00014ACA9A02EAE34EF451EFF65C3DAACFABB
-:1073C0003C77E99F61C10AC37D460B8A1FBE6714E3
-:1073D000C0D37E7EF5E2975BDC24273FB3BC347CD0
-:1073E00039C04F2786FF6005BABCAE068BFB60DE56
-:1073F0009065FD2685E22AC7EFC1B8FF27CFD97C6B
-:10740000B40C45DED8BC9FCEA5F854727B81797947
-:10741000FC3A9AA778F1766246F922D3D856E15F12
-:1074200088F03C031C04E0C7B380C7C58E97BBEF50
-:10743000C2F3C3F5A6F3C6C7C5398BF23E8A415FD6
-:107440002F13E57A0B5F9F6C17BF8752FE5E9C94EB
-:10745000E352DE4A793DAE4F317D27E52C635B492F
-:10746000BECC16F7252F78DAC1CF1769CC83789C6C
-:10747000CBC9C456F5D1E8BB79F6E71E42B69EC328
-:107480005A49EF7D628BCC6E2DC2EF373767D1F74B
-:10749000365F04D77144FE1E9D95E4C81CC6C7B96B
-:1074A000B045894475FE0EF9FB240CF5844EEE744C
-:1074B000D10B267D304BE8BF59CC946FD462D453A6
-:1074C000813437CD6B5E8BC8C3EE1C97CACE61BCCE
-:1074D0002B187965128D5BF145128C630EEB88E2F7
-:1074E000BDC80B9FE5E798CCE332CFA3BBE39CED8F
-:1074F0009B3216EF57EEECD7346E896F8607AB746C
-:107500007490789F1DE6F89CBD53217AFD5ED85B90
-:10751000F27CA099FE73586012CAB9390FC03EB30D
-:1075200028CE0F920FE66E8BD079C04F594BBA0B15
-:10753000D6C3828DDB6E1C09DFCF79EC753BF27B05
-:107540004D56B4BF25137FAA67F4BD55BD13E87D22
-:10755000939EFF47E18909BF157D077899B545A539
-:107560003C0A5D3D914710267C3584F9EF09361CB5
-:10757000527D4DF0B4017FE6A8ECE2C72BF1F6CFC7
-:107580001EB7D9AED9D6E7FC768D59DE74B16B4CF7
-:10759000FA14CF73A0FEECC8E5F9E95F58FD19595C
-:1075A00024A74D7238B78CEE63957278B6D083B24B
-:1075B0009F59A8FFA0FC878D3F4F477FC6EF1FF85C
-:1075C000791EE56BA0BE1914D737B7D5F3FE6EFB55
-:1075D000450AE54BFD7162EB10B4076B1EFF75BAEF
-:1075E000FEBED79305C1D7FAE078857E5CA86EEE23
-:1075F00083BF6B28E5EC05F76DC9E6E9BEC03CDD4D
-:10760000C679D6E13C75E754EAC53C8FADE5F33B5E
-:10761000BE9ECF776697798629AE72DB930E5F9810
-:10762000EC8E28E9F593DB5486FBAC4EBBC36407B4
-:107630007CC95A36213E162E7DFB032BF0C5DC4B50
-:10764000003FC00735F73948EFCF7D81C7533F5121
-:107650002AF329A0BF379AFE3D783E0FEC05B437D8
-:10766000E2E3E8B403CE221E3BED806EE26F91F0C0
-:107670006B2DDAF96BFA1D2DC5CFF33117C97B6D70
-:107680007698EEB5D15006F073FE4EA4532FF37DDD
-:107690005CDC3FFBA7FE9FDFB294F8BFE312FD392D
-:1076A000B6C6D4A80DF3903BB62964272D5C569935
-:1076B0005EC9F07C1BF7ABE51472BB56F1FB29BF2A
-:1076C000C601744D85FEF20B35FE5CF3F07CF3C70A
-:1076D00018DDA323C76B7E8EFE7627EA439785F4D9
-:1076E000A179FEE30BB9DE5CA85AC8BE5E60E776FE
-:1076F00076BBB8BFA29F1847BF426E6F5F56C8FDEA
-:107700000AED685762BCFB2A07FD8E116363C9EF5F
-:107710006E659CFFAC126F1EEBA9CEF54DF673475C
-:107720002FC4D32DAC957E177152C5140DCF337C69
-:1077300090E7A47BA2E02F80ED4C13ED1CB4F1F395
-:107740000B1F601F30AF69C23FFD015E8F0AFD7FD6
-:10775000506027BB36FCA283EC863B53B9FF90E513
-:107760006458713DDC2CE4D4F4510E3FCAF569A392
-:10777000EE0C2084F6C20CF055E3EC585D0AFDAC2B
-:10778000B4707DBF328B71BF40735B39E2EF7230F2
-:1077900093317F1F66BFFD5CF6F9F8C8787E620101
-:1077A000FA19AE609CC12A08BF86F2023B7F5F5384
-:1077B000F893C90FF462EC779835857A0671847C6A
-:1077C000519B41FBDFC978BE200BA195F8ED3B56DC
-:1077D00016B670B8D645F72A790DBF0B7B43058BDB
-:1077E00066C0FCA2FB8DE73B6E8A5AA203305E6442
-:1077F0008DEE46FC599C9ACD03FD04AA9432C4FB3D
-:107800008255DD1B6F63E1361AEF02BCCF0BC7F95F
-:107810003D85F285A6C1A2473EBDC5CAF6AA659CB4
-:107820007EC8878D595A98EA2DE17C2ECF9548BAAB
-:107830009442F37AFC4E13E38376D6A6E3F7F6C4BC
-:107840007E95DB0BE5BE8FDB6BF3C5BA9D2FF9EEA2
-:1078500059E37A7D1CD70DF02DDAB248F76902267C
-:10786000E3FB4744FB8F08BE5F5328E37FDDEB6FEC
-:10787000A1834569DE2F3A888EB2DFC9026E2CE4FF
-:10788000F9D3721C927F67B3C594CF335BF8692C30
-:107890002049283FB8E549EE1732E51D81A144F99A
-:1078A0006DF3B6989FEBFC3CAA412E91DF54B17763
-:1078B000CCC4F129DF4AF121BF4FB36F25FF80B956
-:1078C0009E0D7F3F15E36E6BC1AE5244BC0CCA8E59
-:1078D000F50AFDEEC5B45E1D83519F83B41E4FE7CC
-:1078E0004285BD3D5BD0D721EEB79A8DF615C6D542
-:1078F000D0BE427C6DE476A555D8C375EB8DF6C637
-:10790000B4669DDDC981E17E0087294FDD26EC8EBE
-:107910000FED1D8351EE9BEF0BF8D0C2E711CE6344
-:10792000FC5ECD1CFEDE2AEC4BC9573F2DB419E29C
-:107930006DF2DC690DCA2B7E6F83294FCB45F7C7EB
-:10794000D428FCFE4EE9877C5FC0D36087D27D39A6
-:1079500047D2280E6EF64FB657BAC3169D9F727A5D
-:10796000C66D93103F35E9762BC2F73BEF156BA33D
-:10797000FE8F788AC9FE5953397423E6271D2BFCE4
-:107980007CB2B3374553C479A83FBD86F9F4D77F9D
-:107990000DF3A1F2D9C97ED847B5BFDC718B134472
-:1079A00077ECDFCF4EB6829E6F7FB0631396532382
-:1079B0002C6005FDD8BEA1A30FDEB99CAAD902F4A4
-:1079C0007EA56CCF16C0F6DA7FCCCB1F15DA027815
-:1079D0009F6E8D38B754738542F2D721D697F43312
-:1079E000D5585EE27034FF5D940BD5CBD6028EC2C3
-:1079F00072BC0FF504FDFE429F62BFA310EAA5F51D
-:107A0000099E46386F8A12B6E379FF43914B845E34
-:107A10004BF83B218E42EE6FCD2B0AD0F7D28F0E62
-:107A2000EDFCE59BB4B3458CEB7F0053DFF7AB0077
-:107A3000800000001F8B080000000000000BE57DA7
-:107A400009785445B670DDBEBD656FB260622076C0
-:107A50001212020668208100419B84252C810E2889
-:107A60004689DA2C02622091D131333A7F77D844AB
-:107A70007434A84F19079D169161E6A92FA32C41D4
-:107A8000B60EA0823ADA282A3AC04445058D4E4403
-:107A90007813FF87FA9F73AA2ADD75495866E6BDF9
-:107AA000EF7DDF1F3EBECAB955B7EEA9B39F537530
-:107AB0006FAA6ECF49F0E6331693E1353B53185B5E
-:107AC00050A1F9AD0318638702B99E38C62633E684
-:107AD0006E8C65EC27FCB93ADCDAAE303106E36F28
-:107AE000CFF4D8AE2864AC2A3C4FDC3F32CF21C360
-:107AF0003C376970EF30F8CF5C4EBCFF866C771F67
-:107B000027F4DFF67F9817E761A34798D810C67E61
-:107B10006667F4F35DEDD65C7B01B4CFD99258264D
-:107B20008C7B615BC65C9887D5C1E4698C7DD5FC94
-:107B3000A1D509F32C6AD7993B89B19A768DDA459C
-:107B40009B9AAD63615C0DB4A511F8550B7C196B64
-:107B5000314F8D0B5FEFEF047C0BF1FA6AC2FBB67D
-:107B6000174E9ABD30EE3653E3E74F24C3E5E19A52
-:107B7000EB59E7B9EBECEEE4EB3CC6585963FEB9C0
-:107B8000FD054E8DFA7F9DE31E8CF44B8139F03953
-:107B9000BA89AFD738FE57028FAA6876B307FA675B
-:107BA0000F89B33B81DE8587BC4BE3008FB96B3314
-:107BB00007E93047FF8C929148373667B842AFB239
-:107BC000CB190BE1FACC6DDD19B4DFED284C6080E8
-:107BD000575562E80E3610C8E6CC69B08F646CE287
-:107BE000E330E672BAC5CDE0DE329B848B3DA38BD9
-:107BF00001FE51277846A0B0C10FF3EC477C609E90
-:107C00001B87F68B66FD817A993126470263237BB9
-:107C1000CEACC375DD3874E458BC3ECA16973B93AE
-:107C2000E8CB483E46F6F44C433C713C837578AD56
-:107C3000C194EB601DDED775971FD6E1ED1FE30DF4
-:107C40007442B70A41D73AA783E8B1DF04780E0A35
-:107C5000E3219FCF98E38E10CC777C49DAC0553072
-:107C6000DFDA9EA3EE427CE4F3D7F6F4CE897C3EC5
-:107C70002CB73F5EBF583C660A3CEE42BE41EB2942
-:107C8000063913B4FE09FE4F1D1DA3C0D74C4A622E
-:107C9000EEBC303CFD9A7405AEACCA56C6DF30E788
-:107CA0004AA5BFDC162AA88D0DCBB7111FD932E625
-:107CB000277C6AE236C63340F1E88E33EFCF003DD1
-:107CC000F9DB7ADDA501AEB7EE7CF6FD1130EA14E2
-:107CD0002C3809E876CA0D00ACF7D4263DE0CF4435
-:107CE000F9709BCBBB33361FA782F10B0FBC641D11
-:107CF00005BFCEAF9D3709F9786BC0F2494B049EA2
-:107D000067D8592BCB027DD8A85EAF610F7CABF74B
-:107D1000472868F5F483791A0DFDB5E3BE60F138A4
-:107D2000CEFC498B5C273CBFEE48E683FB22D6BDE8
-:107D3000C61997FCF995F0CB2036E8271D9FD7FA96
-:107D40002AAC90953635139F961ED05D28A24B7BAA
-:107D50006A4C83758EDB640B44816A7DBDED63AB39
-:107D600013E8F5779FF3C17D16D4FF7AC692F0BE73
-:107D70008FAD2D70BDC8E9243A2DDAF1AD9501DF44
-:107D8000C7EDB89DF47A2CD8B104909F5033EBB76F
-:107D900009E6F767C6B99E85F96F5B399EB1C18C5C
-:107DA00025B4CFA0B6BA613CCDB7B07D1AC18BDA8D
-:107DB0006308DE1F1D1ACB008FFD5BBAB1A580C71B
-:107DC000DB7A30F7B7388F2D8EEC4479FA8D4B7013
-:107DD000DDFBA3FDF93F83E795FFC7B832A4EBA213
-:107DE0004D9A1BE5AC5C67FBB544C4378AE62BD7DC
-:107DF000DF29B81DAE4F2C8DF39B12A89F31E8D719
-:107E000087C4AD6200EB56B0179DC8E73E615F2C9A
-:107E10002D1CEF31ED15349FEC7FDD9945FD12B639
-:107E2000A4AC37CF8A0DAFC7D2A2513BA1FD4A6A9D
-:107E30006B3655989DF09CD7F39E49463AC1F85849
-:107E40006FA776796802EBC47E75D87F618F67A0D3
-:107E50003D86799BB3DC2DA88793EF6931DBD19EFA
-:107E6000C6DA1DCF821C4C2E1AE89C1BB12E7DCF8A
-:107E7000F5CC0972644B6EB3B861FE19D046DAEFE7
-:107E80009BBBF0379F0B3D65AC9EEC85F44BACC7BC
-:107E90003D0CF1BEC9C1F1967AF5AE182FEF0F690E
-:107EA0005C3FFC9B6D8167E1F78FB2BCED68474298
-:107EB000A358E58B644F43191571FF3AFC81BF76D7
-:107EC000E47FBCB98525C2FD3F74E0CFF5FA42F8E6
-:107ED0007F25FCC4DB3AAB43B978FBEAAB436EC009
-:107EE000ABF9EEC183D13FC8E7C5675AF9BC8EB67E
-:107EF000B328AF35BB629CAB607DE5C01B84DB76ED
-:107F0000DA02EB32E93AD392B1B5ADD3A0BF26BEC7
-:107F10002D17FD4FE9EEA820CA6DF3EE2833FA9134
-:107F20003D39DEF8CC14BCDE7BB406F2EDDE613305
-:107F3000A31C2439DD0978BD2B7C2F64C7A43E1A0D
-:107F4000E5CCBB92EB9F57E8E14C21B7B3841ECE42
-:107F500034BB12EE02BC6F7E536768C767DDA3F5C2
-:107F6000DB5480362DCE9513A18752DF2C289783C2
-:107F7000513EB95C56B77713FA9D29E6E57A500E63
-:107F80000E1AE9537E65B700EAF7A2F6241A27F520
-:107F900055EA696AB6F7AA4CE043F952D06F788E79
-:107FA00077495A01EA4B584EAC0E94279093D4B9B6
-:107FB0001172B0B4F97B33CA89A5582339B1415B3A
-:107FC0001A21479E8E38C531B63BE0317959A669F2
-:107FD000150BF79766CA78E5E2E4DD95C9E56B56BF
-:107FE0006C30C704F3596AA35C4B00AF53C94EB25F
-:107FF000638BEF030048B0D8E229C53863F16F34D2
-:1080000017DA5F8C3FD0FE0C395C6BF546E0777D6C
-:108010007B7FE6043A4D6BEF456DFF0C6F05F27FF9
-:1080200066FB7441C7FED432679189819FB9C3CE84
-:10803000FDCCE9DA7B6FC2E79D0ED85CF83CB0D08E
-:108040009CDF02DF42B7EBB2BB10BF372DEC6918E3
-:108050007F22CAABA35E9EE8C91C8F008AB3D700FB
-:108060009F61DE1316E677003FE700EC45B81B730F
-:10807000771B847A07EB8CF02B67CC0D192C1BF83F
-:10808000BBF88363663085B7E686FA07E1B955A386
-:10809000B8FF6F5D6F21FF5FDDFCCE1013F47F9999
-:1080A000E9BE8C81ED1D7BB9F7365CCF82A98117C3
-:1080B0002C00DFF6EB97E28739C3F46C340773CCFE
-:1080C000707F23D0D10F78353EA0970578DC13530D
-:1080D000D1EFC272BDA03D9BE823FD8DB4DF5B7D77
-:1080E000A9B088B01DBF901F92F2BD50E8C142D424
-:1080F0000316E96F2A3CA3500EF334570E8BF43766
-:108100005C1FA49D067927BD29CFEEE95ACAC27625
-:10811000DBE88FF6EA8D8F0C87F5FAB2BC4FA2DC54
-:1081200097FCFB7FBDF4117455BFF887D1C8A751E8
-:10813000576A4CD72EC64E7E6F213B794F05233BA5
-:10814000096DA49DB47411A7AFBB44B96F10720F31
-:10815000F12DC58D68C723E7FB28AB6413F2795B6B
-:10816000A6C6E7FB17E16DB4EFDB3AF0BE38FBFEC5
-:10817000FBCC8BB3EF6FA27D2F3CD79E33980FEDD6
-:10818000F9DF76F609A0BD3FC6C0FEA37FDB11E391
-:108190007C56D87BF207D10981F3D9FB5FE7CC7E0F
-:1081A000B30B7BFF67E4FF3F6BEFA57C19F5C1A81C
-:1081B0000746B99F783FC45FC8A7AD1A43FB1A8E24
-:1081C000B718C9F1FE2C2EC7526F22E22FF2F3A08E
-:1081D0000F819CCC73F5F2BBDA0F0A9C986F16C422
-:1081E0000D645A58DEA5BE487937FA913959DE1F19
-:1081F000C90F083DA97ED1E807BA92A76D16CC5FDA
-:108200002DD5DF723F006DA41FE82ADED1B32E2DDD
-:10821000DEF9F622E5A97B168F17FE1BE5A97B5632
-:1082200061A7F27459D63F113F9C878FE467A49CE5
-:108230004D7C83CB07CBE6F13EC80BE1BDDFDA33E3
-:10824000B03413ED1EB787137F62B548CF9B453D11
-:1082500041CAEBA86CEF88AC083E637C8F71FBC50C
-:10826000C68533926B991BAEDF0C6DA4DDB021FF88
-:108270003A89EFDD599766EFFA0BB9B8109F2BB228
-:10828000FEE5716155677C656EEEFFC37CB14D43C1
-:10829000B9F92E6866A85F5DF1D5B286D35DC2CB11
-:1082A0008366E95F93D0BF82BCDC98F54FD89FF21C
-:1082B000D2C6D37608FDEECE1A5E611E06797A111B
-:1082C00013F58F11ABDD66B42FF0EB709A91EA23B2
-:1082D0006FEB122E3E381AF098F84847BF1FFBC7C5
-:1082E000142774D453309590E37F9935ECE00384E0
-:1082F0007703E7A3B7C5ECE9170117001C170117AF
-:1083000019E0B57C3CFA1107CD13E0F61EE6D7065E
-:10831000212CE7137AC0DAC676C3787193E6C07A67
-:10832000C80DC57FB3227FCA4B5B5E4D87F53E9873
-:10833000555A110B21C00D680701DFA7B226AEF612
-:108340009BC5FDDDA93E463FB646CDAD039FAA8B3A
-:10835000B44056E6B9747C2A4BF567F86356EF676C
-:10836000D6824BBB1FF948F767D1FD41DB253CFFA7
-:10837000BA62E60E7462279F9376F22CC0727EA0DA
-:10838000DDB4469E871BC76F12E34326D34206F433
-:10839000DA9175F36AAC978D615C3E7665DD54E1E8
-:1083A000CFE7E8BA0DEB3D1FBEEB3A59AF53BD3FE7
-:1083B000783E7A6D3CE77E211FF3557949307BF694
-:1083C0007D077824246B0E8C6B1779A21EC0F8BD34
-:1083D000BC54CAF7AD15EE62585F1453EA7F61F9D9
-:1083E0005E50311AD6B788C9FEEAD5E8973CA68E0A
-:1083F000F15CDE77681DF7E781FC50290EEE3F9CAB
-:1084000075DB6AA40FF083FA09369F47DE1B0D70F7
-:10841000B1413F847C937EA2DD06FAE4746237CEDC
-:1084200008BE7DADB14AB47BA1121EEF85B2789B28
-:1084300092CDEB243F083A5AB2791B8A8EA0438F23
-:10844000309FE127887944C4BA894ED7278B75FBC2
-:1084500057554CEA05F727B27E1AC849C2332B5646
-:108460002FEB19BEBFDB33AB484E3AE6F3AF3C8887
-:1084700074BC5ED029E599FB0E0A39D250EF1692F2
-:1084800040801C6CD2FC3AAC7321CA4127EBFCEB58
-:10849000B972E437DCEFB69CE7FECFCEBDDF6DB836
-:1084A0009F59922FE57EC1A749063E9619F838DA02
-:1084B00000574938A0D83369E76635AD5EDE3D190F
-:1084C000EB8D1ABA09B4D7566D20637DB31FAD8802
-:1084D0001D86F2EAB4A483CDEF9FFDD8413BC8725C
-:1084E00005DA3392DFC7C97E4F437D27784D857B00
-:1084F00000CA4FEDF254185F90FD9BD576D0AF1BAC
-:1085000096ADB6604C5394FDDBD56698F7FA82FFC2
-:108510007815E7336B4F1E9C94791E796D30AC63F0
-:10852000AD01F61BC63F7A01FBBECC70FF3D86FE57
-:10853000070CF01A03BC52BD7FE61C8DF46426F0D4
-:108540000F097721BD999CDD111776F8332D96E23E
-:108550002445EE272EE57065F6BF57AC8C8D809FC5
-:1085600079AE22528E2D8CFFCC48667EF41F962E5B
-:10857000ECD9D86CB5DED5B19E3CA3BFE3FD7FC579
-:108580005FD3689F45F1CB7B75156ED6A5BEBD7CCC
-:10859000F08E58BC28E16D1558BFE872DFC3BFB537
-:1085A00002F73D263E24FBB756B823D629C78FFDD8
-:1085B000E1271D9FB7E8992D15EBA1BFAA24988349
-:1085C000F5FAAA44DE829FD1D18FD5887AC7D89D8B
-:1085D000BA07FD4C55743067717EC43A59632EAEAC
-:1085E000B3F96E9DF8E35FCAF39159CC65C57A453E
-:1085F000734242DD0618BFF76EBD0EFDDAB1BAA4B4
-:10860000EE984FECCEE6F9DEDE842BBADF02707313
-:10861000CCCD56ACD736DF3B86DA3DBA7B451BC89E
-:10862000F103D9AF56C4F6C1FE04A2CFCA679A2B94
-:10863000EAC15EDD9FEDA4FBBD898EEE4D18AFAEA5
-:10864000B230AC5733E67A8AE4E6D7B681AB008F16
-:1086500099F557D2FED1AC7FAB189B06E3662DB7D8
-:10866000D0BE02FCF447BCBDABC658B17FCE32D100
-:10867000FAC751BBFBC797DEE80FE3DBEED35DEB38
-:1086800060F0AEF6ACF85980D7A751DC0E7FD2DA95
-:108690002B1EF1ECD5CBFB7836CA6B7C5CB486CE56
-:1086A000C3E18C9F0AF366E6B8D7E075397EF78F91
-:1086B0003AED836D6F9DD51DF9B74EC8CDAEF65915
-:1086C000DD6745F8FBB95F9B89CEBBADCE3B30BEC5
-:1086D000DC1DDD53C3BA0CD03909EBB673447C0DF5
-:1086E000F252F752277EFFA16C9DE872DC56C73E1E
-:1086F00005216EBE3FA518F194F7C9FD374B0FE772
-:10870000A0C838FA775794BC909D122967470E622B
-:108710007C4F7134C0DBB23F5CED07BFC2F642FC58
-:108720008F7824BBC7A25CB17B92F83E686A636E07
-:10873000643D221CA72E11F6808F3BEA8FA3BCF567
-:10874000E8735101CC678EFAFF1217597F977A327E
-:108750002F3ECE8FCEF88BB83833D2F598D9F7F9B3
-:108760002F70DFF0490BD9D1B94FA6DCD386F600C4
-:10877000F889F520E373937A59689EAEF707BF54E2
-:10878000F5C47FF2BC7AF26EF6C98AF5F95DEBC9E1
-:108790003C11B78F7DD2E241399F571867C67DBA29
-:1087A00092275F7916E571DEED51836C80F8BC2766
-:1087B0006DC4DF96B838BF03F711E3E3CCDDA03D0D
-:1087C00021EC574B7D14E5297A772BD93D7D45A1C6
-:1087D00013E953AA33B31DFC8A1EEF727A38BC0C1E
-:1087E000EB86CBE38A9CC85F472FAE0F1DFD099532
-:1087F00013B4FEE17DB393758F3C361457CD02D38D
-:108800008766FEF3FB6835CC9380F5C7FFAE7D34F9
-:10881000AD575CF2E7908A87F7D1F213AE43F1AB24
-:10882000D3096F7D495400E9A967703F318E69B45F
-:108830008FC61CB0FE7EE17D34FD9783893EC77DE7
-:108840002057BD812EF1761AAFFF520FD8E0B9A59F
-:1088500049BCDEAA3F56C1705F0DE8EA77003C2EA6
-:10886000B996F6D77E25ECCC4C8D791A49FF5D1967
-:108870009827CF7D328AF838EFA95BDFFF4D01F2F0
-:10888000AD3C39529F7A08F983F9983D313CCF17B6
-:10889000F5BFCA407C4A7F07F925E69DBAF7B1EBE0
-:1088A000C96EC6D07E1B73B4FC7A28CA4B7DCC40FF
-:1088B000AC93CF7B322D232B3F7CFFBC2577E7F297
-:1088C000FB216F8D47BB1545EBA9DE6423799979B0
-:1088D0009FEE263FD9D34A7EF29365510457F7287D
-:1088E000227D9B69E2FB6F1013A6927DE72467D57A
-:1088F000B1CCFD522CDAFB07423AE78F5FF0CD8A0C
-:10890000FC19DA2B899E7F33D218FCD77542DE66BC
-:108910009AB81CB15D1AED373156EB443B5065D225
-:10892000C8DE19F5B2AC178F5F6766B86EC2FB166A
-:108930003E68732DC9E438E8121FC89B169A42732B
-:10894000711F926DB1517DA306D61115CFCF3DBCDD
-:1089500008F8D79899D98AF52927B76B129F1A6713
-:10896000C5389457E83F6C86FE8571DC2E2FECC627
-:10897000EB3E2CCE1E7836F279887336BFCF198F36
-:10898000FA368CE405F5DF04FD7F63BCBF34BEC856
-:10899000D9924FFBF72BB15E82F8F4E91FF15C80AE
-:1089A000D3FAA33CDE6ECE8A433E244DAFC4E73DEE
-:1089B000AF937D02A57AB008E3C0E7F5C198CFCEAA
-:1089C000BC6FEFD83508FF69A0035198F9C2BBE42A
-:1089D000A76E1372D682F13FFA2D80FF046D6D2FC2
-:1089E0006E1FBC3AAFE7D4F6E2755E4957D9BFF0C7
-:1089F0003E0BF163E1722E0F0BEB3FA07917C6859A
-:108A0000BA233F166EB60C41B9FE85C07B567DCFAA
-:108A1000E2C3201FB32C090E0D2E55FBCBAD08571A
-:108A2000376804CBE72DBCEFBDEEA67C3E1FB63603
-:108A30002147E1795332D0AF7DF55C52C6CC08BEF8
-:108A40007FB56C6B3CEE6B7F1A15CC71603DE6F622
-:108A500028D73AD253CE8FAF96E5ACC37ACD1C4718
-:108A6000280EF7C3E7DC919D88FEEE982368C5FECB
-:108A7000638D992684DD0E4731C26EF30082BF12EA
-:108A8000E754E807F8B448E37253FDDC5E6B163C2C
-:108A9000EF29419FAF9F7F3717EB060B3342B9E8B1
-:108AA0008741AE72D3912F7FD4285E58F49CEE8E0E
-:108AB000EA1F96AB452857A0FF0B845C2DDAB4F56E
-:108AC0002ED4D345284F83CE954BC82FF7D1F51719
-:108AD0009F1ECBF8FDFB50EEA4DF07789905EB6BEA
-:108AE0005601C37310FE1DD23F85FA47F37E7F3EC9
-:108AF000F913D662C5B8B846E7F102703615E389B6
-:108B00009A268BBF25C23E2EC2FEFC707F57721381
-:108B1000EC25F6CBEA6DE4978242FF5AEEDB1C8F20
-:108B200072F1F5F37B5F1D8E79D68B9A03EDFE39DA
-:108B30007A28E85683748AA775527C548374890F07
-:108B4000D3A943DF845CD4304E0749971AB3A0936E
-:108B5000EC17F7370B39AC6682AE9B7A737D17FA48
-:108B60000D12437E44AECF9BA89E1F3825E4FE6DB8
-:108B7000B1CE6A901B573EC997DB3A44E4FFD0F56B
-:108B8000F59F9EA6FA91E4A7C43B3A873F1FECB439
-:108B9000BB5B6298CF2D2636BFB37AF56742AE2C09
-:108BA000B1DCAE7C5C9F7E531DD06FC173BA8B88E5
-:108BB00087B957C4736DA696388A4F7FA93B705DFD
-:108BC000A5FF5E3101D72DE5CEB2513337E13E210D
-:108BD000EB46F497F8955EE699D08DCB5D10F19158
-:108BE000787EAC05895FFE3F690E1EEFB658B18EE8
-:108BF00028F5D488EF2981AF1EAF0DD706203E2E71
-:108C000027EA37033F48F8C41EBE9B9EE73F7A77AA
-:108C100066FFF0738EF9E3CC38EE18E37640CAE5D0
-:108C2000C7A22EF1F1F2AD140FCBE7D873B85C45B3
-:108C30003CC75B977CEE733AE2BC1C8E97D48BFDED
-:108C4000895CFE4B977D40E3A49DC51FACC7497A64
-:108C50004ABA45E8A5421FA95F529F245FFF51BD54
-:108C600062F7A450DC7AAF5837E948F7B05F40F9B3
-:108C7000447F67B3F27370117E93E29A713DBEB583
-:108C80007A3BB92EE964BC1ECEAB1C1948FF71B10A
-:108C9000A9B45FCE96A5EEEB15119F7D8A752FB412
-:108CA000A77FD003644F196865843F97715BFDED22
-:108CB000E31CA350BE9ED3E8DC91F4DFF0F34087C1
-:108CC0009CC27CF30B6ECFC57862794E16F767C9EC
-:108CD000EE93787FF589D0D87867387F19793AA8EC
-:108CE00027607D7053A6923F54B7EE233D5FC84284
-:108CF0002B30DF9D79DFBBE54391FF7FB0D0F98555
-:108D0000390D99E4FF4EAE9F3D1853DB99CB7308A4
-:108D1000BEF5D95B387C1F8FEB662E2FDC80F5F912
-:108D20004FA3DC6351CEDB566B0ECCBF463C5B7869
-:108D3000CF0DD03F22EE8A6E88EFD1F59F960FC7F8
-:108D40003CA24E27BD71AF7F643AF6BB9B74172ED1
-:108D5000710E73DC7303CAB93981F44E9E6B5C6A81
-:108D6000E1F2E6CDE176A33287DB8D4A21BFA54B48
-:108D700097E6E2B982B6A7C14FE1FEBAD5D918C4C9
-:108D80003C70E765AE75F09C1A485B53419E4E6897
-:108D90003C1E9F6F657694AF0396D09D88FF813B04
-:108DA000E306D62302FAD921A81F6E9177411E450A
-:108DB000CF95F492CFBF59E8819C47DEB71FE32AD5
-:108DC000F42302DF93CBFE301DE385931B7312590E
-:108DD00004DD4FE2BA80DEB7827D7CB1937CB03A8D
-:108DE00047D6B902FC39A28E78C0D2D003F77321DE
-:108DF000AE3F1E199F7FF174941DE512E27AF5BA19
-:108E000085FB1588E795EBA03F0ADC91EFE9550952
-:108E1000DE4EEC916C8DF1BE2F27B6D3785FEA9FC2
-:108E2000F17E19DF77D45D7A5DDAB9AE561F300670
-:108E3000146228066780EFE8981F5EC2F397731BE1
-:108E40006C0E1BD0F738EA17EE0B6ED679BC68E7CC
-:108E5000FA767CE7C000D615E61E61AE20C0730F1F
-:108E6000E92E278CDFB7FA5E3ADF71CB5A8D5DA60B
-:108E700045E45D8FAE9E8EEA76CAE55D9106E34FCE
-:108E80006DE4E751A03BD6906FBD9AE6EC3ADFFA6D
-:108E900057E559B2FE64A4FF7FE4887CCBC55C2A09
-:108EA000FD79DEBE1BC4A868D0B9F46FF57929AF8F
-:108EB000FAC6379FDA618D4F97A6C33AFEA67DFCAE
-:108EC000E008D4A3B804AA9FB4FA6A6973F09BA619
-:108ED000C16727039DB6C72638D07E7CE3ABA3EBE2
-:108EE0001D7223E474E4A6663D9DD1F81D2360FC49
-:108EF000AED804DCEEE8641F8EF3D978FEE667B7DF
-:108F00000FBD0CAFCBF57EF90BCE6F89FF971B67BA
-:108F1000C763BCDAFCDBA41DC390CF31090E1485F6
-:108F200079E21CCEE76BB83D3A614FD88075D41317
-:108F30006BA775C7FCF0164B9BD505F3BA7656C4E4
-:108F4000637DE433734BBC035B181F443CCC011DB1
-:108F5000EDE0F03246FB83C38366E6CCA4AD7B92A2
-:108F60009F61ADE600E6CD5FE1BE21FAF1B3D17CB1
-:108F7000FF5EEC07DEB28DD7D93AEA2AA2BE3042B4
-:108F8000AC37363751EE03D1F5D2227EFD8BB52FAB
-:108F90004DC6F94EAEB73810DF6FD65B68FE059050
-:108FA000DF9B401E4F6CE4E70516EC803C3913ED67
-:108FB0008846F2BB00E4D78EF277BBC56D4D3857BB
-:108FC0002E4B37F2FC7A41A346F9B694CF05EEC09A
-:108FD00058A2BB90533BFCFB095C4737D6B802E96B
-:108FE000D195BCFEA3F5003DB7F37A80511E24DD78
-:108FF000A45C84E594917C4AFE27360E1C954E377E
-:10900000F8899EFE129687F1C2522BCBC3F3507E95
-:1090100053B40BF5FEEF51F1FDB10E5567E7ED5D71
-:10902000D1F1EBB0FD7B544600F1FEBBC9F10AE67D
-:1090300059BFCCCD24B9BD4B775A34F8755A72CB91
-:10904000687203A526B709FDE0521BD911A31D7252
-:10905000E672FFB32D97D1FDC5B9FC9CB885D552FA
-:109060007C215B88077A62FC52119378068F92F715
-:10907000CB4D996606B9AE1891786736449E85B98E
-:10908000E9D370FFB76270E2E62C80876E48E3FD9B
-:1090900003120B2D00D76B3DA68D86FE6B72DD573C
-:1090A000E6463C47CE0BD7FBE3F59234EFC0DC1429
-:1090B000F473B12BD10FFC4D6B5B64D2C3E30F6A29
-:1090C000ECD8762D0CB7585806C6DBC5887F4AD732
-:1090D000EDD25CF770FE5CF5FA2C0839B02E31CB7E
-:1090E000FFDA618DEC19F3D8819F5384FCCDB2C7B0
-:1090F00006C9CEADB4B476C84716DAA90433F27DFA
-:10910000B260FB1473B019EFEFC396393EB753A8A2
-:10911000B8F6A7A4AEED3F282AFB5CCE07EBFB9B7D
-:1091200005D60B7CD5DCC06B50310D885C05F64E46
-:10913000DBF1DAF738EF523F6B89223E5439F07C8D
-:10914000B7C6BCA69FA05D18037231005B900718DC
-:10915000B778F3D7FB502D6E957196B788E2C53B73
-:109160001C7C3DCC3B9CE4F54E21AF5FF82075079D
-:10917000F99C120AC5E351D8D6C9C15CB40F65BACF
-:109180007736F2E18BB54B7B2C06F9F9FA459B6BF0
-:10919000128C3F1178291EFD6AB588F7D9593D78A0
-:1091A00035F4EFCFECB36E55847C55E772BFDF9A90
-:1091B00019CCB81BED4C26CF57D9D9BD1977C3F8B8
-:1091C000B2ACF185AB880AEE45B911FB9393CD9D06
-:1091D0009FDFA8E8C1E323B69EFB639B99F9E312E6
-:1091E000A965F140A7F1804B119E4B0558A7FDFCE6
-:1091F000003D1FC7C5635CE39C9DCAF77B9807EDE4
-:1092000096E4AFE4DB39FC049431AE37D99905D745
-:10921000DB87AD75A0FE4BBE7E21F4F10B3BD7C3BF
-:10922000317A2CD9A9C59B795D6FB1C6EDEDE29D70
-:109230001AAF6F9EE36F37AF409B3C7FED6CB26718
-:10924000D28E39E11FCAD702872721E8FC07FCEE3E
-:10925000DAD28BB2674FE68AF70406B281287F170D
-:109260008A97A41D03F6ACBF247E21C960DDF304F8
-:109270008E63F42AA719E9926277A13D5FFC6436F8
-:10928000F94976620D8B1CC7D62691FCAEC8D489ED
-:10929000AFE54DE9CC09976E6DD2E89CECA4A6240D
-:1092A00082E3DBD3082EFFFD6525B8EE8E7DD0DF8F
-:1092B000F726F8E486370ABCBC4E63C7F93D4CE29A
-:1092C00091DF88FEE7542CE00174F6C4AEA4BAA383
-:1092D0008775E443DA4F1AC22035A8776E8B9FF367
-:1092E000C75E4FFA2FD6B558E8D5E203DC5F2F1ED4
-:1092F000C5F70BCDFE3E09C87FCB7E9D0500BEF6AF
-:10930000805E1884A14B853DB7A59A9833826F5132
-:10931000CE68E68CE00FF3BB43986F550A79B937F6
-:109320008ADBFD98BC44655C65EC5C929F50C6D8B6
-:10933000FDB8DE38D7E5CABCCCCBE3632957D345AB
-:10934000DD7C326B5B867EF2DA4AE88F98CF52FC86
-:109350002DF90D4BB11A57035D8E9F4F9EBE90FEA7
-:10936000B10FEB43F264A00FE807F9FB5387F8FB5A
-:109370002710953C5E0CF0F4FD161680FEE5822E5B
-:1093800018B762FE73CA1D477A23E52E847E0FEC60
-:109390005C42914AB76E6E956E49652A7D523C2AB1
-:1093A0003D2EABCC52FAD3BC7D95FEF4F98314B8B4
-:1093B00067ED7065FC1575250A9CE99FA08CCF5E52
-:1093C000395581731A6E50C6F75E334BE9EF135867
-:1093D000A0F45FB971B102F76BFCA5327E40D312E5
-:1093E000A57F607095D23F78FFC30A5C187A421956
-:1093F0003FF4F03AA57F58CB1F95FE11275E54E04D
-:10940000916D2F2BE3AF6EDFA3C0A3D81BCAF85218
-:10941000FBBB0A3CC6F11765FCB8D44F95FEF1CEF4
-:10942000AF94FE8979DF29F07211E794BBFE4BB946
-:109430002FC496E5A01C3B7B788B7A53DDE784191B
-:10944000F5EFF08D1A4BC2FC67FF3407E9FD25E606
-:1094500081EEDEAA1C9F61B137E179F60BD9C50C0C
-:10946000114F8CD127D17B55A71A79BDC3E8D76599
-:109470003C97006ED91CF1DC6E6E3B24F46138A978
-:10948000CCA1C0299E5465FC65954EA53FCD9BA7F8
-:10949000F4A7CF772970CFDA2265FC15756E05CE5B
-:1094A000F49729E3B3577A1438A7A15219DF7B8DBB
-:1094B00057E9EF1398AFF45FB9B15681FB35D62960
-:1094C000E30734F995FE81C1954AFFE0FD0D0A5C82
-:1094D000185AA38C1F7A38A0F40F6BD9A8F48F38D0
-:1094E000D1A8C023DB9A94F157B7071578143BA095
-:1094F0008C2FB51F54E0318E0F95F1E3523F56FA91
-:10950000C73B4F2AFDD55FB982B42FB59DBFEF2A67
-:10951000E3B98979DF2AE32CC910EF63FD9B45BBD2
-:10952000F0BC7F5771BE8C03CB5DDF2BCFFDBB89B9
-:10953000C7E7BFEFCDDF4FBB4BE771E252BF87CE2E
-:10954000E725E28157D09304BF46F287295615D507
-:10955000239369DF825CA613CFBB411C0440A22980
-:109560003313F39098701CDBE3A7C1171FC76E86F7
-:109570001C07F138DEDBFBC7DE8598B7FD692CE6FA
-:1095800039B732FF0AC403FC6E02EE63BD15A5D6DF
-:10959000A3643BDE0E748C78DE81A8861E83CEA386
-:1095A000BFE3EDAD34BE635E51AFD2607D8B23E689
-:1095B0007F10F22F33E869830FF40C12ED877D0ED4
-:1095C000821FF5A512FC98CF49ED1A5F1EB54FF822
-:1095D0005CD4BFD65744F0533E37C1015F19B5EB99
-:1095E0007C1EBABEDE5749F0069F97DA8DBEF9D4CD
-:1095F000FED1574BFDCFF9EA087EC1E7A7B6D1B738
-:1096000092AEBFE86B2078936F0DC15B7C016A9BC3
-:109610007C1BA97DD9D748FD3B7C4D04EFF20509A1
-:109620000EFAF613BCC71722789FEF30C1AFFA5A73
-:10963000A8DDEF3B41EDEBBE36EA7FD3D74E70ABF2
-:10964000D84FF8A4B7A6BCAF2761C646933CC8F86C
-:109650007732E63D281C45966F94BCC7907F18F979
-:10966000F1A5788EA504C25F8C7F2ECF5DB7342222
-:109670002FF8463CEFDE68E68F027DA837F1BA404E
-:109680007D22A3F7C39888CFE709B964C93C2E9F10
-:109690002BF09A27F4A010E5338FE4F3CD4BC9B338
-:1096A00064BE1D93E1FD91E4B3A7C94F758758FED1
-:1096B0001E7EFF0CAF9607FDA76A6F79959EE77037
-:1096C000E5E243CA6DC194EBB09E7440A73A6C5773
-:1096D000CFAB11EF4974D9BFEB640FF447653FEA94
-:1096E00054AF7FCB125789F596A43C5E874DCA33A1
-:1096F00029EDD60C4F621EEEDBE7D46EF899167E8C
-:10970000FF7F0AA6E6A0E715CC69A173B8CCFD0AD5
-:10971000BE7A732D047C085FC7FCD48EECE94DC77C
-:10972000F55C0F0906C2DEE1B68CCED663C42747CE
-:10973000E09323F090EDA10C4F2FC4E7788E5BC12E
-:1097400027EA0AA73857DFF614E2F59F3BBFFD5C16
-:10975000CB0ED35BD637568C12E7B46ED7E43E38C7
-:109760008F13ED4CC689D45F7527AFF7487F79A476
-:10977000A3E5F6F054AD85EC669516EDC278FB5482
-:10978000ED9D0370BFF046C8F770FF54DAD12A8010
-:109790004D0057317EEEA2EA481CC999D1BEC27D68
-:1097A0000CF7FBAA2004C0FCF16C06AFA7BCE5F9DE
-:1097B000D682F3B2E4367A6F15E4660CAE7FC13020
-:1097C0009DBEDFF0962990ABE9242F560DF09F97B0
-:1097D0000CF2D249BC20E56291782F475E07799B55
-:1097E00082FCF966DBD03CDAA7D935CC89F45C6A17
-:1097F000E2EFD5F95FD7F9B90C2CE5E3B99184FC18
-:10980000A7E9FD020C2E907FC3E2E8FD82669DD59C
-:10981000FDA9137B5A2BF8F856AAA52C40F3AAFBF6
-:109820008AB7E6F1FACFAD795C2FCBF71CE889EF68
-:109830000D2EDA6FA1BC8815B4E47B3A3957555325
-:1098400077FFCF7B45C8794DD3C7FC3C166BC98FDA
-:109850003C87B552CC2BE54BB7C6799F8E8DC4AFF4
-:1098600043CE6B849C7F8E71FF649B33E13AB8B525
-:1098700005481384D6FB3B079DE793E7FAE6300FD4
-:10988000B5F380DD28D71EFF6A7AAF7E016BA4EBAB
-:109890008B8A6667205CC3DA46A7C27CD7AEAC7FF2
-:1098A0002515B09BD6B07A0CD6B9A70666BE826DD8
-:1098B000C57AED73BF93F4C48FCF6FD16A975F0EF3
-:1098C000CFBBE1B951CBB18E3C59E77C606F703EA4
-:1098D000803CB9F5C473D7077A71AFD00BC25FEA89
-:1098E00045D512E6D692C3EF8174E849D16D7F4D1C
-:1098F000C73D16731B9D43A9D9654BC4FAC902C65F
-:10990000FD76B80EC4FDB5D4832F2D9CEF5F3EAF1E
-:10991000D17B365F6A8CBEE7D055DC20E34FD03F69
-:10992000AE77C762B8FCEBA2AE97E14D1D941DF671
-:10993000CF5F9A0243E2B3C97F3F83EBB194781FB4
-:109940001888E7F55ED05C4B01972FBB0532F839DC
-:10995000810E3FC07E8A09D7091FB4F0BA9D31DE5F
-:1099600095EBE80A4F9B95F9713F4B2B7AF57B8C71
-:1099700043CEC5D79B3A04E8B214598475C9128FF7
-:10998000B3333C9689E7EFFF81E7E3FE9E8CCE057B
-:1099900019E9A939F873BAAAAFDAA2393ED24F4908
-:1099A0003CCFC58BF3EBADBC4C5E6714F831E6C819
-:1099B00073C0F3CDE66817EA6B85D9FB67D473599A
-:1099C0007F9379F1FECC2FC81FB0B34B7BF0F3C768
-:1099D000C1AEFC706B473E9E15F693B28EC58A3BB6
-:1099E000AF477AEC0EB25F53998BFC451F7644D299
-:1099F0008BEA583AEE10529DD74BEBB0A1BD86369C
-:109A00000AEB28E42F0324AF318817AD2B841511FE
-:109A1000B63A269EE830FC30233B3D1CD700EBDDF8
-:109A2000F9310BE079AAE633D34BE3A07FE7D766A1
-:109A3000CA831E8F79211DBF23B1F3E4FBE958EFE0
-:109A4000A93FB385E021AD634FF2FAD9911938DF10
-:109A5000F6D356A78DE280DB890EB24EB99D311741
-:109A6000EE83167D184BEF19171E6A8C21BA89BA3E
-:109A70005AB15877F1695E0FD985C030C803DAACA6
-:109A80002C18112F5B1C2A5CC422E04C7C24C011D2
-:109A9000758E4BCD1FED7D445D6D281B1A595763A4
-:109AA000ED899DBE4F65DC472CD038DE9FE679BA44
-:109AB000F5A13ADB549DD3FB471DE975756C200D6C
-:109AC000E3DBE65B37A461BCFB78CC8F44C7277E21
-:109AD000B0A6215D1B46FD27F99106B83784F9AF82
-:109AE0003910C5A8FEB590EA6B570B3FFBC4D94FA0
-:109AF000582AD0B3A18891FF64C20FCBFE86B3A7CA
-:109B0000E6233FCF14DB9D681772453DB4FEAAFFE4
-:109B10009BDA12418F9D10570781C1DB21AE0E42A7
-:109B2000ECBF0DE26A84F1BD536C37435C8D6D0070
-:109B3000E26A6C9F82B81AC7615C8DED131057639F
-:109B4000BB06E26A6C1F83B81AC73D0A7135B60FAF
-:109B5000435C8DD71BCECE2A257C0E337ABF7E493F
-:109B60004CBC09ED2BE01F8D75A1B7DD83A2911EC2
-:109B7000579D3629FC2D6E8D56E0E1C713C3FC4579
-:109B8000FE1FB95CE91F72284BE9CFF4F755E02BB3
-:109B9000EA062930D68722EF4F9F5FA2C069DE090F
-:109BA000CAF8CB2AA72A708AE706657C52D92CA569
-:109BB000FFA178031F03D526958FFCFB0A678A63F4
-:109BC000E97C655772FAB0E08B841FF9855ED9593C
-:109BD000DD766E1FB95FCFF381CB056E8BFA384906
-:109BE0003EF71D1DFA87DC02E487896F9BBADB62B2
-:109BF0007A015F721F31313C5748270E003F87B80A
-:109C0000EF9192533128977BCBAD51C89FDDEE92F7
-:109C1000688497945BD322E5A821D33B88DE53F078
-:109C2000F2F5C9FB1F2A997ADE7DF48751FE7A9FEF
-:109C3000A77FC2822CD48773E8C8E6D37E6D988E46
-:109C400053E9FB4ECC3B5FC1DFA8170C37E9D3F0DB
-:109C5000B976959EEEACFB900E4F3C6AA673581DEC
-:109C6000F389FBE57C63F4B3312DF9E7E2BFDBCD8B
-:109C7000C743FC1B8574816729F825BA9CA3903ED5
-:109C8000BF11FAF66F42DF1E177CC53C1661E6E095
-:109C9000F749BE35CC7F787C2EEA4D11C76BDD3598
-:109CA0000F6B686E9298ABDE1141D747051E4F8946
-:109CB00075ADC579014EB9C6AD21FD32EA3C1AEA4F
-:109CC000DB15F7B410FC84D0EF1EB56D74BDE71D35
-:109CD000416A2F9F1FA2FE31FA73B48E0E3AB85418
-:109CE0003A1AF91410EB91F386EF7FF100CADB19F1
-:109CF00037C73FDE1FEB467F11EF77B878EB14AD27
-:109D0000CB85763FDEEF16706D3EC2DBC4BAE2FD56
-:109D10007E8203625D0DF3930F6C70869FC79C3546
-:109D2000A6487FD3953C6D15F4DF2CE864BC6F9B8F
-:109D3000A576B0A313BD92ADF4A745474C06BB135F
-:109D4000ADE8FD01FC85FB8177C80FF83DBAD8BFAF
-:109D5000223A4EEBC897AA489E56C7DCF406E6DBCB
-:109D6000D71CD219F7B7935F417BF9EE781BF9D373
-:109D7000E6F1E37A46CA5D9358C75641F7617EF72C
-:109D8000D13B60FC448F8DEAF14399BBE79D30DF06
-:109D90008449BA2B08F31DEAF0279E187EDE81FB6A
-:109DA00093A9620D7B264DBB1F9FFFEE21B00BCE0A
-:109DB000309EB27F73D9B489FD908F21CEC7AEE8B3
-:109DC000F39AE0D72B02AFBD825FCD42BE770B7F07
-:109DD000B253F893EDE84F6CC8E722B11EEE4F3650
-:109DE0000B7F12427F02ED5BC29FBC89FE04DA82C8
-:109DF000F1D9A3C96EDA35E14F2041A1F3048B9468
-:109E00007549BCCA7AE80ABFC626C728FC1A1D9B3A
-:109E1000A4F49798D315D87D364B81AF3ADDD7E0BF
-:109E2000A754BF32FCF870839F2A51E0218726286F
-:109E3000F757B8A729FD538A6628FDE5AED94A3FF2
-:109E400013FB6185FC775618BD56A73C57EC3BC900
-:109E500078EADD329DF66D86BDA7BB22F5B690751A
-:109E6000EC9399709F0CC217A759CE97A5F4531C79
-:109E700075C8E249C7F37BF5152087D0161F8238D5
-:109E80008D8A8F20D710F7167AC6511C08F1D26040
-:109E9000E2431BDF6F92FB56C30CFB4F13F2D5FD61
-:109EA000A9C20BEC4F8DE8DB455CD62BE9A2E23270
-:109EB000D02F8ABF1E8FB9692FCACDB60F214EC5CC
-:109EC00038F7C39F53FC25E3B6AD9FFD9CE2DBADA5
-:109ED0001DFAE255F4A550E8ED9643594D2DA06FBB
-:109EE0009B5335972035E94B91D497166137CB6A50
-:109EF000E8FA1071DF568B2706E3BFCD8797887984
-:109F000023EC08C5EB117604F34896A8F6A7A687BC
-:109F1000FBB338B322C733D6D730DF20033CDC3065
-:109F2000BEC4004F308C9F6A806F308C9FA5F43781
-:109F3000C1BACF176F6F16F6418E2B347B7457273B
-:109F4000F676C821D5BE324F8D72EEA1F9E85CB22B
-:109F50009B5B8EAC10749CAFF0678F7CCE21A0739E
-:109F6000FEB9F79798FD31FD410E4A0E9B5DF5CE87
-:109F700030FF249F18E6C311F395DA7545FF9A0E5A
-:109F800073FE76B5CE5DC23EEF107EE66543FCA65D
-:109F9000FF70FADD29203F5B5A4C945F6D393435F0
-:109FA00009E7DB7D760EE1DB74D844EF91ADFFE38A
-:109FB000A46BF17D45899FC4A7F0BD2531B8CF7A48
-:109FC000A6C544F6AFD0E24972744277A37C7535DA
-:109FD000AF945B08A092902EBBC10FD1B961614FC5
-:109FE000255DF61C7D8CE8BEEDF0E224A4FBD5EDEA
-:109FF00026852E23DBD4787DC48944051EFA318F53
-:10A0000007C1EF2AF4BD10DE46BDC09D1115BE5C30
-:10A010001D7F91F1C076C1A76D824FDBA35C959D3A
-:10A02000ED6B6C3B669D1FF95D854FFBF2BAD1A7C6
-:10A030007D79FD6D33F011EDEC99E326B2B3231C6D
-:10A040008D7A6D27FC286E3519FC841A375C6ABE40
-:10A050007AACAFD8EF34D8C5AEEE9776B1447E3F38
-:10A0600025744DA7E763C37C10E72A0DF49471F4BF
-:10A0700085F926CFA31BF8D7C5FDE179FCC67CFA8C
-:10A08000BFFA62FDA5A582FCCDEA98B7843D7F8B1F
-:10A09000ECF93BDF0B7BFE7D778A930E8EBFAC27FE
-:10A0A000EAD1C10E3BCEE222EDB83C0F196A7D2702
-:10A0B0002632CEF70879DCE97E77E200E4672FFDEF
-:10A0C0007F34DE794BC43B6F62BCD31BF78178BC15
-:10A0D00073C03D9BC73BA91A7D2F6649CC55666F5F
-:10A0E0002772FABF3DCE9952A4C639E52E35CE91DE
-:10A0F000FB07BB1D1A9DC39A98A7C63DBBF117ACC1
-:10A1000033D9B500BEC7B5DD3DEDBC763828F4FBCC
-:10A1100080E0CF6BC20EBF22F2861D487FE24B99D2
-:10A12000E00BAF57149F76C5BA9CC89FF93C2FCB64
-:10A13000ABA17C7AA4F4EFBE5A1A7FF0CCACD3F872
-:10A140007EFF6E470CD55976233EB0848316EF69A7
-:10A15000FC7EC56EB7E65CD2495E3FA24DB50332C8
-:10A160004E9072B9BBF51392CB5DEDE7F7A7D27EA7
-:10A17000C971AFB1974A913E57B5328679C385EC24
-:10A180008FD12F5EE839C6F123CC8D7A677EC7F870
-:10A190001C4F7B50C7F3CF3BDB4249B85DE7091E3C
-:10A1A000D0F13DF0E2B620E1BBCFAD39F44C1A5707
-:10A1B0008AE7A25F3BFBCE44BCBEEBB4D964A37D6F
-:10A1C0002607E96DB1D0CF37CF9A625D445F9DF627
-:10A1D00039826D9FDC8FFAEAB7EBF4BEC8EEB38329
-:10A1E0009223E9B6EA4A9DECC9F6D13613D697B761
-:10A1F0009F368BF3D6418A1F76B467C562BBDD0DEF
-:10A20000FA43F62244F47FEC4A07DDB713E6E3761F
-:10A21000C249784839089E369575F6BD9DC7AEE4AB
-:10A22000EFD18F38FBD718A4CFABA7F7C4A0BDDA06
-:10A23000D5C69F33E29E9618CC33DF6837C5F1BA96
-:10A24000CAE064BCDE3CE6DED841B8AE3613DFBF00
-:10A2500011718D7CDEEED1F3A89EBFBB8DE761BB93
-:10A260004FF3FAD1F6003FB7C6841D93E3B79F9E24
-:10A270003AB11FD60F02161A3F820556C4C3B8570B
-:10A2800052B65E49E76BFCD52CD2EE953AD438A78E
-:10A29000A4CDE09FBCD5A407920F07BF9D7A4D05C2
-:10A2A0009DAFE77672BC59B52FBB4E2F499E8ACF22
-:10A2B0008FE5CF67017EBFCCCFF0C71CF1DD95FAEB
-:10A2C00031D74D2BC7F936F373662362557B767011
-:10A2D000D4ECDF2EC4F3FF9B62C8CF6EC7F5E3FC5E
-:10A2E0008718D5CF76973D521A8F75EB56E6E271F7
-:10A2F0009C6AD74BCF6CDA1B0FE3DF59AF117DC7D8
-:10A30000E5A9EBDDE9CEFE35E6C1675A397D653D4D
-:10A3100049EAE59ED6C41BC93E8D86BB818EEF946B
-:10A32000BD4475EC5B03EA3C4337C628782F6C4983
-:10A3300034E46F6A7D1CE24D591F882D1F12CEDF59
-:10A340000ADB797D7DE80F53070701DFE2D1FCFCD2
-:10A35000BCB12E3EDE6C53E32C435DBCD0581737A6
-:10A36000FA73118F0D11FB1AE7C43FC2CFC97AC32C
-:10A37000364B7086E712E2876166485DE85CAF376E
-:10A38000A900E8FFB2882F87591B7E9606AAB2550E
-:10A39000F78F6011710173F859F290707E3BFCB831
-:10A3A0009A0F141D51E512F2C7CF319F5C897B9A39
-:10A3B000A4077E7E2EE222E38CD531FD9B5A80AF2E
-:10A3C000430F31B1DFF17FF6A25C357D26F73320F4
-:10A3D000F4E88EFBF38CE2EDE6CFAC24775BC6703D
-:10A3E0003F25E314B94F730D6B5956AAE1B96CFBC5
-:10A3F000F216A0E7A68373D317C1FCEF7D44DB9D63
-:10A400006C4BA1FC3E7D83925F0E9575A823267F41
-:10A410005201C6EB3645AF657FD3912531F87D916A
-:10A42000332113C969F38756867F1FA069878DF68C
-:10A43000739A0E5B69BF65DB0EAE27B2EE2CE3FCB0
-:10A44000D7853DDF2FE2DE5745DCB24FC42D7B447C
-:10A45000DC121471CB2E11B7EC1071CBCBC26F6E26
-:10A460003A22F4EF9E9800FF8E2DAFCB4A3C6FEE60
-:10A47000DD72D40C0BAEF968C89A20437FAEEAC9EE
-:10A4800078A7AA27E35255FB31C691AE8C2FB5674A
-:10A490002BFDA3D8954AFFD5ED830CF9C870433E38
-:10A4A0005262884726AA7A792822DFA5FC5ACD77FE
-:10A4B000AF8DCC7733914F3C0FDCD6F230F171DBAE
-:10A4C000F1AC84C8B8EC65A137DB8E73FFFCF28970
-:10A4D00053719DC56D27043FBE14FC6815718A2712
-:10A4E000CD7D7D7E0AE615A7AC78EEA32B7996F795
-:10A4F000CBFB4E043E8D8FF47F9F51D21886BFDE7A
-:10A50000F2975CAA9F5CA47E2C8DE3E7DC366BD1CE
-:10A51000F4FEFD85DE6BA9CBCF12E7926A07F07DD2
-:10A52000D1DAA1D86EB078D2F1FDA7CD9A6706DA5C
-:10A5300071FF6FAC9DFE3D095FBE3CD7C49AD03F12
-:10A54000F023C9F0F39C6646F98A12E0D3CCEB43C2
-:10A55000FAD8315F87417AAC87E1BA36595813FA95
-:10A5600079E6664E4777C655089E73AA9F77398E5F
-:10A57000D7427CFF18DC2B7DEF038F66E177B7B005
-:10A58000C57D329B9DBF7760C9F7DE9F5FC8BF67FF
-:10A590009B3008E72DC9E6FBA841B2DF33C4BCA657
-:10A5A000981D3DC99F7665570D792EAB56DF473113
-:10A5B000CA4B93B0B32F677A6674F61D8C67F3F9B4
-:10A5C000B9906D5F4CD6F1B905F67837FF2EA45BD4
-:10A5D000C7F7C05EFE7242CCCC4EE42CD87FE6B307
-:10A5E000F911725010AAD5C5DFA930A9F52D531065
-:10A5F000F97D26D64A7A3D1C179C78EE7C234EA81E
-:10A6000071DEB01635FF0FEFEF376878DEAC439E92
-:10A610009021C8FF83FC7B1A179227E3BEFD07F940
-:10A62000F2BCA4F72F788E584F88A5F3359B0EDA2D
-:10A63000D7611C69ACF7BDFD1EB7E346FC9BDF9BF1
-:10A640009E8EF1D7E691D7A5A31E6F41034FDFF38E
-:10A650005934DD1D09E3FA63D1DE33FE9D2D7FF50C
-:10A66000743C2FB365BC8417F2F1A3F8F8F79F7B15
-:10A67000EB31FC1ED8961B453F7B808F97B0BF66A1
-:10A68000FA28ECB79808AE781EC6437F7B5FF707C1
-:10A69000246FF9EEC328A71B5077001ED5D7FD11F4
-:10A6A0005EFF00650CAEBFDDC77D24128EEFE33E7A
-:10A6B00016096FEEF02F6DB191FBC7520EDF3E3CD5
-:10A6C00055F81DCEF72932AF29BEB83AFF9F859CB9
-:10A6D000BE21ECD501E13F5E13FEE315F41F940F9C
-:10A6E00073FFD12CF68D770BFFB153E4BDE1BCCBEA
-:10A6F00023E28B4A910FF33CAC606429CF7B1DB2FF
-:10A70000CE9F61EE2C1F9A5CA0C68993F255BF3292
-:10A71000A1579222A7653DD20D7972B6214F56FD01
-:10A720004A8979B0214F1E6EC893D5BCB7B87582DF
-:10A73000214F9EAA8CFF20DF29F6916E30E4CBB327
-:10A740009471613EAAFB36617ECDEE948F5B8A6781
-:10A75000DFFFBF8B8F9DEFD7FCFFC7C77F501F6305
-:10A760004DCAFE8DB17D53F8FFD785DFD82FE2802B
-:10A7700057459D639F88E7F6201F7B635CE7127156
-:10A780001D3FC721EB202F8B3A549338C7B145ECBE
-:10A79000BB6D1275A8A5C5DFF1731C6799E0E35B7B
-:10A7A0009DF2B1DCA5C67913F3543E8E772619E2EB
-:10A7B0003E35CE1BE350E3BC52BBCAC7516CB0213F
-:10A7C000EE53F938B2ADC410F74D30F829F51C0737
-:10A7D000C405ABFA15E27B09EA798EC2907A9EC372
-:10A7E000E8DFE5FB8A326EE888137CEA3EF326F464
-:10A7F000A1B85F9466E5DFDB307B2FC7B843D2EBAF
-:10A80000B7FDB83FDFF2979B889E85E8CF3BF1DF2D
-:10A810001BFAF1B868433F5E97C0F723A30761793D
-:10A82000D3CFE39F84490E7EAE8A85F0FB53E78940
-:10A830009B36F44B09C74B66472DC33842B799FC8A
-:10A84000F8FD5DA6DBE9DCDDDB5DC451C7FA65CA56
-:10A85000EF9F6A38EF5FC4BC5AF16B14579DEAE76B
-:10A860006EA4F94B5D6D5817DFFCA1D5558FF21C16
-:10A87000C5BF83628CB75EEF97CBFF7E8FA01F9E14
-:10A88000FFFF39FA4BFC502CF9DF16D57F6220010F
-:10A89000F36C88E6F09BFD3E9E8EDF1794FEFAFD7A
-:10A8A000E74F913FCD8DBD7C36E6CBDA1A7F22DFB4
-:10A8B000AF0C927E19E3B62EE35F439C7624CFFD66
-:10A8C00006AEEB1BE19773F1935283BABE7F43B49C
-:10A8D000E736FE3D18B78ECF957492FDFB04DF5F1F
-:10A8E00017F375D045CA157E9F2631E23D5803FE09
-:10A8F000925E2B0EEE0DE111C64B5D8F5C4727F289
-:10A90000E3B940DCFD4D67F2C326B9C47BBA9DC7ED
-:10A910007D16114746F27F38AD2B20D7CFC60CC22B
-:10A92000F75FE47BEBDC1ECA7766121D0D8E4CD000
-:10A93000A39B0EE974CE81897D7073073F8B35F43C
-:10A9400033E6B11A4B8AA8BB1AF7138DF503E3B9A6
-:10A95000B2E2D6CB15F8AAD3EAB932F7D9BEE7F5F9
-:10A960002BA3634718FC52A9C16F4D34F8B5690693
-:10A97000BFA7D6C5CDCC2CBF3324F6EB35277E7FC1
-:10A98000C7CC2914D92FBE03C4E9BDAC0BFD95E794
-:10A99000674FF57312DD3BF4632D7372FEF995F783
-:10A9A0004CF4582FF1F9A121D28FB928EFB50687C1
-:10A9B000D1F73CAD2EF5EF33047CF68F46E7E07B14
-:10A9C000368CDAA77C8E8F46D3FB38A9D43EE17350
-:10A9D000D2F535BE3C6A1FF3B9E8FAA3BE226A1F5E
-:10A9E000F6B9A96DF09551FB80CF43E356F92A09DA
-:10A9F0005EE9F3529B05E10DFEBD812C3F7301C65C
-:10AA00002C7B253C2F82CE997EC023828E57D43951
-:10AA100014B8676DAA323E7DBE53E94FF3E629FDB7
-:10AA20009755BA1438C553A48C4F2A732B703777B7
-:10AA300099323ECEE551E098BC4A657C94D3ABF4A4
-:10AA4000EFB96A7842CB79F4B9C1E73E8A7458E528
-:10AA5000F31CE5742A3BCAE95349ED2DFDBB117F78
-:10AA60001DE64637FA6D47BE83E1F976AB9DBFF729
-:10AA7000DDCDECD0BA45CCDFCD0DF329F8C27C4A50
-:10AA80003E17E0E789F33C4755BC2B95FB4007C9CF
-:10AA90004FCA38668CDE230EF3B1FB2D8E3F0F06B6
-:10AAA0003CEE1BA3337C6FE5E0E8695417C12D4CE5
-:10AAB000D6891DFD4CC4A731FDED942F4E7954A3CA
-:10AAC000FC0E56528E75C4B987B25D917F0F4AB69F
-:10AAD0006FFF8A7F6F2866CF3627D6C5A614CF4C66
-:10AAE0008A8AC8FFA604BF1F9D46F30D1C12057875
-:10AAF0004C5933D33A3B3FBC3E396EEEA36A3C1A05
-:10AB000096FF805DC4E3B44E699F5639D6D1F555A2
-:10AB100079E7DFB73929D6F58588D73E13F1DAA76B
-:10AB200022EEFE58C4DDC744DC7D44C4DD1F89B875
-:10AB3000FBB088BBDF17F1DA2111AFBD23E2EE15C0
-:10AB400022EE5E95B78EFEAED5998D1AD3CF73BE29
-:10AB500074C17A759DF3D7AAFB86731F55E3EE394E
-:10AB60000FA8F1DAAC656ADC7D739D1AAFDD58ABD6
-:10AB7000C66B33E6ABF6F17A6FA9025F57A9D6E54B
-:10AB8000AEF5A8FB86924FD3CA543B694B55E3B54B
-:10AB9000AED6BB35385EC7BF4382CCFC34C21F463D
-:10ABA0007C0F5E39EF58E07097E27E4D21F32CC5A3
-:10ABB000FD9C91A6D0BBB8DFC4DED7E93B904D78B1
-:10ABC000C730D0D73343264D7146F81DBF4AD7AAA8
-:10ABD000236A7DE4863BD438B8A25ACD67AC656A57
-:10ABE0001CECEEA1EEC74E33F81D26FCA195FFCE5E
-:10ABF000467BCEEF874C31D5F4BED2A5FA232B335A
-:10AC00009E1FE3FE889E9BA5F4933F320FE0E7244E
-:10AC10008688F714EAA386BE89FB777B3EE4EF17AC
-:10AC200000D943BDE0FEAB18A7B7D53E8EBE1FB717
-:10AC3000D3C2DF1BD89D16EB5A025D579DE5EF0787
-:10AC4000B076339D1FF3E27B235938AF7A7EAC3068
-:10AC50006456CE97590DFD97A14F3C2F3EFC1CDD4D
-:10AC6000FF1C3EE21CC7003680CE47B474FEBE41D6
-:10AC7000471C679053697F0A823C3E2AE8323EAA0D
-:10AC8000A2EF8C99DF67F49EBDCDD476E2197C3FAC
-:10AC9000EA735E871DC5D4BCED9A496ADE36C6717B
-:10ACA000FEBC6DBC5395D78979AA1D2877A976E09B
-:10ACB0009CB8A6859F43EC2AAEF10CC892EFE91030
-:10ACC0007DA272F6C5F07D4C2E3F23C43A1FB27AA6
-:10ACD000E8FD95653D19F16984839F57ACC77D1BDD
-:10ACE0003CFFF71E7FEFC5CC3C4903B03D3E569C70
-:10ACF0005F9CE4A2F95A39BF8AE0DF4F59E79E4FC3
-:10AD0000B485CCCA7737CC2C82BFD03F07E5AB30B7
-:10AD10002C47FF7BF012E728A59CC5265E60FFCE7E
-:10AD2000AFC481B21D1572EBB88E571C7C1FF59510
-:10AD3000506D08BF13F95D2AAF53DCDB63AA997F1E
-:10AD4000B7C51D3B06F83256ACBF48EC936DF1B168
-:10AD500010C6739B7C766AE5FEE78AD4C549E8375E
-:10AD6000B76478D3F15CE096946ECB18D8E9CD96B1
-:10AD70006E3D3A7B8FA0D93294FCEC96E63433C614
-:10AD8000A1A3CC0E33DE37AAC72C1DEBB1E3F07DB7
-:10AD900093648419EDD36DF20543A3E95CA897CEC3
-:10ADA00011C13A4A318E1DED98497FEFB1F93DFC52
-:10ADB0009B4A181F77ABC2FBF6A5F0F3D736073FC7
-:10ADC000DF3A36791EF1ABC0C5BFDF57D023D615A9
-:10ADD000C0E952F9777CE6C33FCE17EE2740EF95E6
-:10ADE000EFFB0C651130F2CB00AF31F2C7702E7162
-:10ADF000C561717EAEA5F37D9BBF8AB8628BA83B0F
-:10AE00001C1171C54722AE3828E28A15863AD0BB9C
-:10AE100022AED827EA40AF8A7ADE7E51CF7B5DC46E
-:10AE200015F2FCB5948BD495CC694B60ECAD999C34
-:10AE3000CE692BB54019ACA3740E8753EBF8FEE82E
-:10AE400015DE064F4901F65B5CE3601DA9950D63B5
-:10AE5000701D69556DF49E52A5D7EA746BF87ED2C9
-:10AE600013F45E947C2FEC164E1A76D39CB1647F5B
-:10AE70006FF18A73C77A6B21C9D7A316FA4E92FC79
-:10AE80007E5CE51CF57B4AB30CF4BDC9005B356EF6
-:10AE9000475E93741FCC0647D23D4D8C8DBA459CBE
-:10AEA000E7C597AE3AD1973582EE922ECD574D88B1
-:10AEB000E3EBE0FBA13631CFA1E21BE2709EF77A13
-:10AEC000F0F9A60A7D30CEB74ACE27DEA78916FC58
-:10AED0007FA8EFF9CF9DBEED63CA39D3B7057F3A9E
-:10AEE000E62DB9DF82DFD3AE0CDED713F525FC5E8D
-:10AEF0008D3B8EBFBF32E9CF99C0A755E23D0469B3
-:10AF000057AF13FA6B7CDE7BBEF3BFBFF35EC90C99
-:10AF10000B7E0FFDDAE02FF8DF0336D7A6469EF74B
-:10AF20007D0FF1035B79EFB53FA3BF2319CAE0F2B0
-:10AF300060BBC6E6C4EF0C5ED1C3BD1CE998DAC3A2
-:10AF40003546D447C99FD9043EA698B55A0A8E1FE4
-:10AF5000AE91DED65F3581CEFF5D770D3F27F1FFE5
-:10AF60000010785941008000000000001F8B08008D
-:10AF700000000000000BED7D0B5854D7B9E8DA3320
-:10AF80007B1EC0A0838A1912B003A819531F230F78
-:10AF9000051C70A39812436410548C8803A2D0D669
-:10AFA0001892A6B7F4D4731804110951D3A63DDA48
-:10AFB000F818CDA3BDB9DE9698DCA64D73CE21C698
-:10AFC000A4696F12B1471BED6D0DBE92F46BBF1EED
-:10AFD0006DD236A7ED77BCFFFFAFB566F6DE0C6825
-:10AFE00052D3263D852FD9AEBDDEFF63FDCFB5B967
-:10AFF00072057EE633E6606A78C8C7F0C77245819D
-:10B00000FF4798579D83EFF18DA19E5DC9C4FFB79F
-:10B01000B26032BC0F7EEA176C266335ACD53F00B8
-:10B02000EF7BF3B454F774A8AEB35D187232E683C5
-:10B03000DF2B59D047CC239F354CA57A39DE920AB5
-:10B04000682FC767349FA17E6B0FF33AC642E14F6A
-:10B05000B0BA89D05FD46D55234E9CAF37F839A76D
-:10B06000E6622C2BDDD2E080F554666C5ECD264086
-:10B07000832A877B0AF60F2CFA796E1E3C7DEBBD86
-:10B08000B83D6CD70CED4E4DEBCEF04E8FAD6BEB6B
-:10B090003656128279B666FC0FCFFA646CF7BBF6AF
-:10B0A00010B6B3B1DA7E18BF77C12FD3335DB1F6D6
-:10B0B0008766954EF3E7C380E5A98CA53136D51E8A
-:10B0C000CAF24F1FBE5FC6C28C41938E9244C660C7
-:10B0D0001DE71B948803D655DB07F01B83F5975AB1
-:10B0E000F07D439FC3DB8B0B649AEB0ED8E77ABEEF
-:10B0F0004DD630A52B7F009EEBFB9A2BA8FD2EDBB7
-:10B10000398497137E11BE19ADEAB928BCB03DD37E
-:10B1100095711E53D98E73C07A17F89327BCF949DD
-:10B12000F8772ECBBD62E5F847F8D68AB6090DD57B
-:10B130006319E2D303C02C1CBEAF95EF59D9C07878
-:10B140004604C3F263EF4F37652786B01FD28D5395
-:10B15000D0D52CF8BF9779ED7310FF9CAE6A045DD3
-:10B1600079197B9EE82A6C0B47D709FB62F7D962F5
-:10B17000749765188FE17A97EBCBD45F3B3919D67A
-:10B18000BF9AD15C6C75A085C3EB3E4E8F4E78297B
-:10B19000C689D11B8C1334D11FE16BA258278CB305
-:10B1A000ACACECFFFC1060F6E8CEAC3B104FCBFE35
-:10B1B000D1CAAC305F3534C37275AD12894079792C
-:10B1C000E056E287E5FAF1E17D4D8DED821E3F6F9D
-:10B1D0006CCAA671D694F371D826DDFCB4BE9D046A
-:10B1E000CF20635BDC3A7A7B33934D6600C7E77709
-:10B1F00037EFC3FE171F7430A423867DE720DE39A6
-:10B200005C4F02ED22FDBFB54D891C84755FD8ED02
-:10B21000A075BEB94E8930C43F733F3E00EFBBFD01
-:10B22000294497171342FBBE08F58D5B93FC61D848
-:10B230006FCFB8D68D4198F7624AA81EC769DCFA6D
-:10B24000494B18DAF724869D59386EA3D57F10A68E
-:10B2500058A9024CC7C113FE7D133C1B7A74F883B6
-:10B26000FF8EF9151A7F898585FA5DC3E9C7319B81
-:10B27000D723C01DBAF52FC9B2D07A4F3DE4A0F54F
-:10B2800026CCF6123C1A0A12B484318847A6A93992
-:10B29000B09E746D12AEF38202FC09F4767E9912B0
-:10B2A00046F83095E3C57ED38D07909F1E15FBBCF5
-:10B2B000F0C0DC4948CFE75378FD394F6204F77599
-:10B2C000CECBCB618F2BF218F2861AF22D4FE6FB14
-:10B2D00050800E1AC5BA1ABD162D01F0DBF8D08ABF
-:10B2E000CF229E1B3D7DF7E0F36472385981FE6FDB
-:10B2F000EDB6328437C2C39983F545CD586F86CBFE
-:10B30000257F16ED07E1371EE0F6E6AECEE410EC41
-:10B3100083B959C83E310687869DCF7C419949FC47
-:10B320001CE6FCCEF94461BAF318E877A5D71E2EC7
-:10B330008771D8D1C944B72BDD9C6EED855B52B3C4
-:10B34000783357943EBC54EEC3F3BD51941B906EBA
-:10B3500001AE2B915F66223CC6CD1980F7B54D46F4
-:10B36000BADD3261F303D5B0CF7505366685FA755F
-:10B370001ED5C037556D463E827D1BCA636633DAE3
-:10B3800077CF38419FDD9C3E81D2270567C4E862B4
-:10B3900097DF42ED7075B651E06F86EBC70D0EE793
-:10B3A000905E41DE9CCFF0EE2B24B900F4C3D7C5EC
-:10B3B000AC3A7E68E87110DD33200F8413D0A7BD4E
-:10B3C0006A468C5E247C1A7675103D3608BA6BECA2
-:10B3D00003FA19A3A32313BC70CFAA9C273B46678B
-:10B3E000541F87CEBEE767C44792FF1A58B09E59D4
-:10B3F00087F3B57C129E8B109F9FA90DA7E3286150
-:10B40000EABFA3A4682CD1BBC007173DF4E344BC3A
-:10B41000254BFC84D9093CCF5DA2D2DDA69C2E032E
-:10B42000796315E7AC5D1B8C0CC0FB94362BBD47D4
-:10B43000F9A2427B9C9621C29F9BFBEDA9504E1026
-:10B440006597C0ABD5EA4A43782533A3DE338E999E
-:10B45000E4899FE355CAD99D369686E7718238DF25
-:10B460009B17652BD86EA7A2907E602F33D281D513
-:10B470002407BCB32DE2BC0BCB738FE4ADDDC9F761
-:10B480009B906621BEF86D3A085425060FBBD8FF85
-:10B49000B8016FFF00D4D77B9CFE0894C73337C92F
-:10B4A0008752986940376F4D45121BD0E179917BE7
-:10B4B000BCA1FC29CF4D86F6B779B30DF5B7FB3E9D
-:10B4C00069A8BFC39F6B28DB994EAEE33A8738DC8F
-:10B4D000ED02CEBA7A299707118FD5621F3BEC2176
-:10B4E0004F10CEE16ACF7A92CF1D259FF10CC13E5D
-:10B4F0001C1ECE7F76D42761DC84294D6ED2238436
-:10B500007C2E805FC443270E9216A333BB09CE6600
-:10B51000FE33EB930DB385DE730BBB85F41ED7B8FA
-:10B52000B8FA8D597F031961417A4D14F85A647540
-:10B5300091DCD85A03FA9C82FAE552AE2FF9EE2636
-:10B54000BC06453B16B690DEBA5CEC5FEA5FAFB571
-:10B5500033367033C06301D7B396175CAA41FA340F
-:10B56000CFDF2BDAC97262C1014D8B234FDB057D22
-:10B57000250578FD722753510EC9FAB090B7CB85D7
-:10B58000DC5E027C8C745B894F9DDEDA27C6E98B1A
-:10B59000D22B1BCCD1F3E9214545382488E2011692
-:10B5A000EA9B9D8A700E5323AB2BC888BFFF04D043
-:10B5B0009D437A0CFD94CE6EDAFB79A05F474DB2C5
-:10B5C0001F6D0B87D6F0D857017E8935497E8B37A2
-:10B5D00046EF64774079828FD37B6DBAD34FD561C4
-:10B5E000EDC4E43931BDAC46E877A9AC95F8609874
-:10B5F0001DE3E47439B21DC3CF1F399F439CFFCCB8
-:10B60000BAC94F7417E4E7BE057E91EE96D51AE9E4
-:10B610006A4568743AFB96A4B3B96C2ED159680395
-:10B62000D18543B4D93109E885C389E82351C2578C
-:10B63000E8DB36950DA880A763887F58A4CBC69217
-:10B64000719F83DA0BC417833E66D3D3413060D534
-:10B65000223A3C0E16B24437C897411BCB7810DA19
-:10B660008DD1562C76C3FE064B1DC90D74A8460C11
-:10B670007AFB3118F7AC8B8DA8EF9BF9612AFC039C
-:10B68000E5C0D68C373DB89EAD3646E73D0B5FAA88
-:10B69000D5A0BC5D96D92F6A4B61DCED09B2FCEEFA
-:10B6A0002EAC7F3C91972F3FF9A75D241F805E1140
-:10B6B0001F49021F49527F9FAE832BE0C13921876A
-:10B6C000CE19A709DE66BD5ECA09F3396C9EF74D37
-:10B6D000139E46DAF7B0F50269DE323A5FFCC76CBA
-:10B6E0009297AD06BE183ECE00E9EFABC4BE2D4921
-:10B6F000CF6584E2D89151F86FB0FD4A6F2F009C5E
-:10B70000BFABA0DEAB41EF398C8B0E18472978E92F
-:10B710003F51FE2BBBC2E3108E56688072DEC642DC
-:10B72000B41EC9AF0948075684FB00D583FC1D52DF
-:10B73000B271903A37C24581F6571029D77A4E96A2
-:10B7400073B9B6529C7F9538258C57D9C34AD13EE0
-:10B750004F58B7F6E03694739A03350A787FA914E8
-:10B76000D707F59A839E9734C41BD0B341EE3C5F54
-:10B77000F287B71F817EDD8356BF03C6ED0E3CCB3B
-:10B7800050EF7E673AF3E3A6BBB021ACAF3EE45E78
-:10B7900064F722DF0C9CEA9AC2D8D9763658661B29
-:10B7A000BEDEC12309762F6C36144E99F9348CD342
-:10B7B00053E070A33EF7C626AB1DF134B8B9218C17
-:10B7C000C0389D16EE57E07D8F1A6268DFDB377553
-:10B7D0002E42BE3B6D0BFBC7C1B36773F82EB4435B
-:10B7E000346F457926ACFF608F5A1E89733E6FC84F
-:10B7F0005188DF5E7BFED3B4FF6369767F028C3BAA
-:10B8000084FE0DC0DF31DBCE0C3F8EDBF1950C1CCE
-:10B81000FFD8BAADFE23B0AE631D0EB4A4D8B1DD1F
-:10B82000CE5A1CF75871B367BD6E7CE74DF6567C57
-:10B830003F78A3DD9E4DFBB99CECC1FD6CCA1D8F0A
-:10B84000B4D99D669FB416EBD73733DCAFDDB3D3E5
-:10B8500086FB73AA6C179E2F9FF05C7A752EDA4BCD
-:10B860005ECB9C4F41FBCFFB43B7E6001E57B69D16
-:10B870005D8472C95E96B2059FDD629DF2BC92F84E
-:10B880001D4A6B74E239D6DDB496FB613C9606C264
-:10B89000639A2588E75177609D73EA74FEBE79CC80
-:10B8A00070B874A3DF6516AE73BD67FD0C6CF7BB93
-:10B8B000F610B41B2A76D4C68363630E9763CECE8C
-:10B8C000E6AC365877F76EA71BE1D3AD847635002A
-:10B8D0005CC3992EFF63DEE1FDBE25FA49FA003C08
-:10B8E000111F6E387CC3EEB08AFA2AC723C0C5691F
-:10B8F000D3C9CD43B34A9B111E51789BE74DEB262C
-:10B9000079D1AD70BEFED6E159BBC3509EE90FDDC3
-:10B910008DFD8EF500AFCDA27D4E427D7F24FE19B8
-:10B9200012F5DD1DB0EF38FC3FD46465378FE5CFED
-:10B930001BE03975B3759212073E43C56BB3D04F08
-:10B94000750CEA2D30CED06E277FC2FB2CA4AF1130
-:10B95000E873560E97F7BE99C12D39687F4DF7935E
-:10B960009FEFE5D9C1AD39A407B47AB0FC31A0DFAF
-:10B970007D1F11FA65EC46A4D7E9BBC3609232F78C
-:10B980003883DE3AD2F91964432A9EC71D257F68A1
-:10B99000417BA07786DDEBD0F905A51EBDC4C7E5C8
-:10B9A0005B70CA853C38B959F5F4F564DF80BE4C4C
-:10B9B000FE4137FCC6F30F06D11FA893874B4C6599
-:10B9C000A99FBE94037211CF7DA127A77B7706178D
-:10B9D000A0FDF18AD51F01B86560072857552811C9
-:10B9E000D4D73B4A9E203D9E093D6E8958E74FDBE8
-:10B9F0009DAC6C0A8BDA732BC5FBA496B38FA27D2A
-:10BA00009D84FE4FF4D7B638BCE47F41E4C3FCD537
-:10BA1000627FD2AE233D12F6B3B245F841D9835CC2
-:10BA2000DE5803F9480FB00F835D1264263BA4C9AA
-:10BA300066B0E75699F407B3DD506DD21B76A0EEE1
-:10BA4000847AA1DAEF447A7A777ACEB12C2F5587AF
-:10BA500007A47E0FED420527B60CE9CE9F1342FEE8
-:10BA6000FCB85D3B8DF2684BF011E710FAADD5885C
-:10BA700013E5496FF9E79291EE7AEBACE5486F83F5
-:10BA8000EDE5D4EEB5F6203DAF08B951E1D77E4FD4
-:10BA90007C29F4B3EAF2D2D35D3ABC5669B79DEE85
-:10BAA000D2ADBFB2A0CA5096F4556965ADFD71CE56
-:10BAB0009759B9D2EFA231833E6A3DE40FC5392FC1
-:10BAC000E43391A9EFEAE1989C2BE846E853F74F5D
-:10BAD0005F3076347D46EE53C247EE5FD68FB4DEDC
-:10BAE000DFE55C9FF566BFCFF59AD719C5D308EDA2
-:10BAF0002BF1108373E077873B56A25CA8F0877226
-:10BB000073010FD565CA96F140273F16FECA1F077D
-:10BB100092236158CF8B3EEEFF4C6CE17665625903
-:10BB2000D5223C9FDE2FBEEF2C50883F6B024A444B
-:10BB3000837FDE2AECD59FFA18C51F805F5F4D8694
-:10BB4000F2EBC536EE47665AC51D7362766A621D12
-:10BB50008F4FECB033FF00F69BE6F26F86F7CB25F4
-:10BB6000FFD51AE310353536C33953698A3B249A19
-:10BB7000CE99A512EE7300EED931B88F647F8C4454
-:10BB8000274CBD94877E31337C369AE063B6772AA2
-:10BB90009F33F1C735DA3D077BF25E9C807A469988
-:10BBA000E29F82F8C32AE897A83D49E1905EC94721
-:10BBB000C2DE93F1AA1D4BABC9DE7B0DF581B1143A
-:10BBC0006F9A84FE6A39BEB4F366FAB5FB725347C6
-:10BBD0005EC709D16F6B557C3DE104EA09B3F8F308
-:10BBE00006784E5DBA30239E9E70A250E809508FB1
-:10BBF000FAC189DDE5FC5968D4135879EE55E0D2D5
-:10BC000041FB4D989237361EDF1D9B157A30570742
-:10BC1000F7245F2B2BD3C17DFD6CEDCBB8DF2AE180
-:10BC20008790F3817C3FAAD7C3CCF33D95E316F60A
-:10BC3000C6789217F27935FCA9EE56867476BF4D18
-:10BC4000AB457DCFEC4F3A9CCBF5C49E2CAD05EBBC
-:10BC5000992BE72AE376487FB56FF6441E7E20BF16
-:10BC60008FC91E94F6D301ACCC8FD985AA9BDB85F6
-:10BC700089E9978EBAA1AA3937F40CC2A3F85224E5
-:10BC80006C01BE735428A43F39D219E93DD76C87A3
-:10BC90005D63BB1E646AA0E7AD8DDC1F5F3A5BA5E8
-:10BCA0007262C87A90CE05931F2751BB4C76D8128A
-:10BCB000D00384DF86F4A953429F0AB256B2F75CE0
-:10BCC000B68813FD1566BF4D6DBA65602AC8F5DAF2
-:10BCD000824B35DE99D4DFE0F7A9F5661D4D15F5E9
-:10BCE0006E782E09723FD072F403E1F835919E2CE4
-:10BCF0008CC3F955BFC6B89D87FAC58AB55F98F160
-:10BD000035EFF5F30349FF92D417A53E03F2A5677B
-:10BD10003CE265A1E225DBDFE42732FB85A45FC6B8
-:10BD2000EC3F32FB8BDECBCD247C48FD4BFA7F7E93
-:10BD30009F6BD4C3FE0BD803DBF516C2910AFCDD62
-:10BD40006B63193BA773FF0EEA4BC74A7FE046FDC2
-:10BD5000E2BF4CFDAEF57CEB8673E83C9EAB2F2436
-:10BD6000D850DF0E7A42E44F5CA218F9242D4FF828
-:10BD70001BF35C7C1E1147EE6E6F93FDC3286F8230
-:10BD8000E9F64882121B8715E45F133F8D9DADA530
-:10BD9000E6E5933D72431ED2B31FEC9119688F08FC
-:10BDA000BE2F48A5FD302D959DD7C78DC5BAA3EBF5
-:10BDB0007082DD32E3FDCF3F218F19E6B91ADC76C0
-:10BDC000941439EDE88F001C5B395DB9A3FEFB2CA0
-:10BDD000F4EB6CF0EAF58A7A8C5BE4A2DEC9E31A34
-:10BDE000F2BDCE7FAE22FD26A687B4609C73F5CE51
-:10BDF000BC689C8CE2A751FFBB8F51BC488EA3321C
-:10BE00004F07F101F2AA5C8F358E9F5EACB749F007
-:10BE10000100DCE9009259BBD3CA785E02E713192E
-:10BE20008F500B83E599B0DFB5DB148A1BB370ED3F
-:10BE300051D4EFD7897ABBF0BF99E348EB441C8615
-:10BE40005937909ED6F49031BED6D8672C9BF572A8
-:10BE5000E9EF576191B8EE7F403C713844ACA3C321
-:10BE6000E100EDF36F140E920E2B723FEBC1BC9606
-:10BE7000EE84D0AE068C6BEF75923F846C48E497ED
-:10BE800001F885FD6CDB53F008EE675B9E95E0D70B
-:10BE9000ADF03C97A3695F730EE9E86D9BE0F35B3F
-:10BEA000F2BCDCEF82E7128844963E81F848E6B5A2
-:10BEB0001C4BE37AA53DC0F5C643938F2CE5715723
-:10BEC0009EDFE20BC4F25B4A013E33047C7C539A52
-:10BED000FC03F09C116826784C7FDA68AFDEEE3305
-:10BEE000EA953EB3BD6A2AEFCD8B9FD7128BB3097B
-:10BEF000BFBB58BF99AFBED9CEE32D4F80DD8ACFEF
-:10BF000043ED6E7A7EABDD43CFFE762FE96987DBAA
-:10BF10007DF49470BFDF16ACC7B896F4434AFFF8BF
-:10BF2000F7F3B8FDC6027C1D95622F8BACE9C908FA
-:10BF3000E7E301AE178E74BE54971BFDA0CB82C6FB
-:10BF4000F8DE8A5A637CEFEE99DA73785E26CDF4D8
-:10BF5000D842BA78D43AB1FF1D5FE3F12639FEF139
-:10BF60007FE47897E58B62FFAF0ABA483A9266F3AE
-:10BF700002B2AA1EAABA15FDF6CC9D734DFAE0498D
-:10BF8000C197499BDD36F40B550DACB4E338EB7625
-:10BF9000C138AE6B1F676BC6C40C637CE1EE3BB16E
-:10BFA000FFF1687C61E39DA5507F5CC417DE7EBA1B
-:10BFB000F5EB6117D2ABF673941FD63CED0CC2E3E0
-:10BFC0006D719E437908DFCB32FCBC9C3271543FCB
-:10BFD000FEDB79F9C3FDF8D6854A6BBCBC96CB79FC
-:10BFE000513FDAAF496E39A37EB44BBCCCE5919A90
-:10BFF000CFE7EFFC296BC1713A9F652D87E3E8F32A
-:10C000007FCC53E478EFE591FD2FE560F00FF1C6AA
-:10C01000B33AAA2621BC2FDA785E8C793C35DF2E24
-:10C02000C7B3E463FFF4E8FAD47CDD783B00068311
-:10C030008827D59D4C714D7617C53F251D25D5BB4D
-:10C04000EFC0BC05302C199E2F49DF71DF91877E30
-:10C050009C9F64FB1F6323E3F51782BEDE12FC7511
-:10C0600011F90BF8E8BCE0AFB3C85FF03C23F8EB84
-:10C0700067ED7E2AFFB4BD80CAA7DA352AFFA4BDCA
-:10C080009C9E27DA83F4FEC7EDB554EE6E0FD1F314
-:10C0900078D923B7E2B9F3DB6F2A248F475ACF67E9
-:10C0A0001EB51AF8A7654F9281DFD63F34DE506E79
-:10C0B000EA33C6CF1BBBB20DE5356DC6F8F9EA56BB
-:10C0C00063FC7C55CB3CC37C2B430B4DFC7CBB8978
-:10C0D000DFAB0D652D9FEB89D5E5AB0CFD1C9E46B6
-:10C0E00043BBA4A52C140FFFE5F99C3E8F94148D3F
-:10C0F0001D1AC5CF616FBBFDE7A89F44CB6A88A11D
-:10C100003E6F6F5B42EFEF4FE0E79DB95F7D3E3FD3
-:10C11000EFBACB9A820B18EA458BAD7ABDE7D3B361
-:10C12000424BF375F6A0DDC3EDB17726D7583D40FD
-:10C13000474BCB2EBF7803D051689091DDA381BAD5
-:10C14000E7013DB8A0F5C1853740B9267C8FC17E97
-:10C150002C6A79F205605F16283BDE3901FAFB672D
-:10C1600087EA71FC12CFA517B0FF828AD92A92F50F
-:10C17000FD298CF4D18B19F6C8C138F4706FBE62FA
-:10C18000885FBDDF73DA1CA7CFF2B152F42367F9E1
-:10C190002E95A25C83B286F1AF43B342F7229FC1D2
-:10C1A0007B0DE5E4FD33D667E1793252DCE86B02C2
-:10C1B0005FD29F20D7B5A384AFE7B8882F0C99E250
-:10C1C0000B3A7FC23FE58FE24FB828FA0D7D35BEAE
-:10C1D0003FE1A2883B5C947187AF55C78D3B5C5CA7
-:10C1E00024FC09508F7E848BBB6BF973D1E87107F7
-:10C1F000B93F388F1EA2F3271A77107ABEF09B1F23
-:10C200009BA5FD33D6AF9FADEDC2E76F6668BB114E
-:10C21000CFC775F14FF7445DFCB3EC0786F8E753E1
-:10C2200039A103F93C6ECDD0AEEA0CB3A1846C8C7D
-:10C23000C70637C6A3E3FF9D2FF5EB813F2B3EAB2F
-:10C240008BA35AAE7C925D731CE09ADB15F0BC1494
-:10C25000B37E9384101917D3FB9EC80B1D417875CC
-:10C26000A57CC7CBF3AF2CB1F30385DF08FA907937
-:10C270003E391ECA2B945B278063F09CD99E72A91D
-:10C280000EED94410137F3F3DFF3DD029EEE0988F2
-:10C29000DF27F2823F267C3FDDEFA5BC36F1FE5A58
-:10C2A000D7F1B83DF873D463BB1BADDE835C6F2759
-:10C2B000BFC5CD819448AF2E1EFC6B3C2FF3D1FF40
-:10C2C0003834D90EF8EE0CBDE0C27CF037F6A898F1
-:10C2D00011C3BE911CB621FE6B7DFC7C5BE0097D29
-:10C2E0006268143E077A186FF1D03A2C96023E2B02
-:10C2F0007F86157C9ADB0FEE7937D50BE37D632FB4
-:10C300008F7FDDBCB7C9D9A81B3F6B0E3F77BA91B1
-:10C3100066F2303EA9443051BD3670F9D5B9185F88
-:10C32000F15AC8CFF1C6A6DF9E5C817E47CD4A7E1A
-:10C33000C73736BD43E5535E4B2EA2EF0DCF6F4E90
-:10C3400062FB9BFF71DD446EB77078ACD994FB78CB
-:10C350006F26C5C59439008753DA3BC9D9D363F139
-:10C36000B3350A0BC6D363D2E670BC2DD65AEFC4E0
-:10C37000752D0E3918E6399F6AD8FA732C7FA354AD
-:10C38000F15AD1AEF7F1796AF7A8944F0BF0D98042
-:10C39000E557FC490CE75D107A52C5F6BF9BA1B08A
-:10C3A0001B94EB0857ED9D54E4C33790FEE2ACFFBD
-:10C3B000D7F2DC147C345505BECF41F81F75E9FD7A
-:10C3C00094929EBE94A765CF21BF5FA825487AEEC0
-:10C3D000D2ABE8A79B799EF6372FA9187B487CB48F
-:10C3E000F546F42F0D5BE708EBCB9BC3E5E46F0448
-:10C3F0005FDCBC577DF536A4E74D36CA43B8252F20
-:10C400003807F115B5B7AEF3B921F3D7060BF87DB0
-:10C410000450A7691E58AF4F8575242889FE30E760
-:10C420002BF2CF39C5F907EDB4B1D06E0DEB1F403B
-:10C430003F1F53B59D56F41F16DAC83E5EB1DA961B
-:10C440008C7889C5CBFC067BC3FC3C8FF131CAD309
-:10C4500070D27310EC6C8C97E00F68E250A90ABDA3
-:10C460007FC6C31AFCF37191577A6FC16D0F8703B2
-:10C4700060675878795DC16D376D862D9D9FD47A40
-:10C480007219ECABF741C5DFE1C5E7815D8D78BF7F
-:10C49000A24DF19743D3FA8169F518626CEE719061
-:10C4A0008E7F6EDB176E457A7DC7C3DC48CF2BD2FB
-:10C4B000383DAF3DC12216287FAAEF418A7B064F47
-:10C4C000A894B726E3B267D2785CF6CBED03B46EDE
-:10C4D000B46B17CDE12636FE8CF3C33AD08F5AA643
-:10C4E00052BC743C7377E3F992A86596727DDA6D5D
-:10C4F000A7384F05635F473F4F1BB79B0B455EA4B3
-:10C500008C63B10BDCBE6D815F9427E3CB8DF6713C
-:10C51000BEC9FE95F2CD1C6F01FA0FE3FB8E3946C2
-:10C52000FB7824BFBD7C3E0D7A04EEEF3B228EFBF0
-:10C530005DD0D7319EF92CE8EBF87C0EF4757CFFCA
-:10C54000AFA0AFE37300F4757C1E017D1D9F4741D2
-:10C550005FC7E74BA0AFE3F365D0D7B1DF8F405F94
-:10C56000C7E72BA0AFE3FBA78BF9F9D73DC51ED9D1
-:10C570000CEBEDB6B19F215D854B455C58C4C9B647
-:10C58000A54CA5F3DDF927A072D0A70695D06710BA
-:10C590001FE10C27B51B4CBEF4C7FFC0F2B64CB26E
-:10C5A0004398EAFDEE10F4EBFA62A6BF178A3D76D7
-:10C5B00046F2FEEC71E656409F796B993213FDA866
-:10C5C000E7EF50FAB13C788742FAC45464BD9CD876
-:10C5D000395AF4AEF7209E679DC94CD0E3237BB552
-:10C5E00074E88F6B237A1D5B8F76E97C872CBBEA1E
-:10C5F00035A0CFC63645D8A9EE7D48BFDB14D93F5C
-:10C600006D2FB6EF92FD45F98445F6FFCC1EB4B709
-:10C610004F46E76B5885E39DCC92F54D75583E1B10
-:10C62000CDAB2B5E8DED07A3E3E7EEC5F2F90C3938
-:10C63000FEFA5554B6C9F2E3D4FE7C2A6F7F4B71E3
-:10C64000EA7EB49BAFF7789D217EFEC139A6E9E36F
-:10C65000399B8AACE67C70F2BBC938BF25C935E589
-:10C660005AFCA5BA383FF94B613E1BF2D9E74B5350
-:10C6700026A1DC3D9BE18F6BA72C2C1AC17FAA2938
-:10C680003CDFDECD42981F9F28DE27F6F13C7ABBC7
-:10C690004F1D96477F2DFE4499F720FD89B54DA388
-:10C6A000FB136B4B8DFEC435A27E247FE21A933FB1
-:10C6B00071E526531C22F4FEFC89756CC086761841
-:10C6C000D314E2A33A77FF8B13D1DEBFE0257F229C
-:10C6D000F3BE4CFE56797F02FF6F9983F7CD78F950
-:10C6E000ADBB140FDA15BD772913F179E62EE546B7
-:10C6F000E4AF0B77296EE4B7CB73F93D98FCB7FD37
-:10C700002F7BF1BCF558FC1C1CC17FC15045B029E2
-:10C71000C5DB0BE39CBD4B1987FD57DF9769477A53
-:10C7200000BD53D023DB83FC624D520CE5BC499223
-:10C730001EF73E8CFC317FBCE497657B905F4BED30
-:10C74000B27F3B95578614D1FEDE3DDA64E0AF053B
-:10C75000B2FD843AAC5F962DC7DB4FE3CF4F92E535
-:10C76000AF12FFF544C7FB5F34DFEB2821A9FC00C3
-:10C770008D575A25E5D9742A77D7C9F15BF7625EE0
-:10C78000EC2A8BEC7F1BF1FF5A26CAA8BFC37EFFA1
-:10C790009F381FD6CDFDE32AE4A73BA3F57F7C1885
-:10C7A000F9AD4E949B9F79620FD6FFCDEFEF2F3CF2
-:10C7B0009FB9BC9A0D2EBA212FC617E673A5AE906D
-:10C7C000EB9D052D4FA2F86275AD07ACC88FB1B8CF
-:10C7D0005A5A4D10E9DB69A5FCB9A087DD1A2F9FD5
-:10C7E000FF0F73F9F9F485B92E83BC1E39BE167F8D
-:10C7F0009C86423E4ECF0216D7CE3D346BC1E6B981
-:10C80000F931BD0155443B3C4BE06981E77B334244
-:10C810003D588FB20BFD30D2AFBD44E41377947C0A
-:10C820003DB800EF2F15DAFCC21D3EA88FF7AAE233
-:10C830009EEBAA053CCF2BD4EB207BADA647E49121
-:10C84000585D148F506FB21FA0B89988A78630EF3B
-:10C85000388BF2BA46BDDFA19AE2A89D62BFA5B3AC
-:10C86000DFA538F5DA5778BEB08C63D78B75AD4548
-:10C87000B90CEB6E6C522216E8D7888207E3BA3EF9
-:10C8800016F166C6E2CA2BCBD4013BDE0B13F7339D
-:10C8900098D087A3F1F01A6F3FE6C7A85A825FC30A
-:10C8A00079D84090F2E2305E94C9A2F1672947AA94
-:10C8B0009A6FB80BE3D43AB94571EA44364C6E909E
-:10C8C0005C88E63589387A343F47C801199F6E1075
-:10C8D000FB5A1E9503154B50CF4DBC5FC4A945FCB8
-:10C8E00059C6A9AB4CF7DA1A030BC7903FD7AFFA7A
-:10C8F00029AD26DD789F29D18487A945FC5EA58CCA
-:10C9000053BF32D7186FBEDFC648EEF66419E9AEE2
-:10C91000A488DB3D9F2C927EC8C48104D4BF999328
-:10C92000EC905EF4E78CE5F6085DE632F975D4B676
-:10C9300055E47FC47A05E850F1BDF49F2897B15CB7
-:10C9400004ED55BCDF82F87059C81E95FE1F545384
-:10C9500016E5901FE8DC5CCC0369ABA771E47DF6BB
-:10C96000C713E3F3C7AFE74A3DA1DF86ED56795E13
-:10C970003A85F3FDD97E20618745F5182FCF7F4991
-:10C980009DEB9571091BBFEFC76C4B6790BFE4BD72
-:10C99000B9E41FEBF7E23AE4B9B4EC7B4FD1397656
-:10C9A000ED7170DEAFA1F0DF5685278C1CC7981A99
-:10C9B000E078F2CD0C3A3064CE26C8B883E6C49055
-:10C9C0007854CEE2460A0C72B6AEE5BF819C8DE982
-:10C9D000FDDE3A1CEFE3B67EA0A70584D772EE7F9A
-:10C9E000FBB8ADFF07F9DA4AA4C30F7B9EEFE5075A
-:10C9F0009B719EAD8A56EBA27B31CCAF8C1E2FDC97
-:10CA000088EDCDF1C2ABF931FEEEB718DD6FB1ABF9
-:10CA1000E0A3E9B7F832C00ECF6BE0A743C44F01E3
-:10CA2000CE4F7FEBE71FECF747B8DFAD4A7F24D14D
-:10CA30007AFDFD064FE4855EC7F1A7A63B1B509F1C
-:10CA40008179BCC87F517F08AEBBC0E00FD9D3F25B
-:10CA500021F843609F6F115ECB385EFF06F0A6148D
-:10CA6000E27E34AE47FC0DD2654621E2B09FEFEF87
-:10CA7000AF30FF0C9AFF10A797287C849EA4834FA9
-:10CA80005DCB5F073EA5B4BEEFF2F57D0CF0B98239
-:10CA9000E8D5CFD77B35FB7BC35CAEB742BF7AEA24
-:10CAA00097C7E960A3D0ABC12E5F78833766978FB5
-:10CAB0009DAD3516F2F87353A121CF545B87E55134
-:10CAC000ECE64F17A68E6A37DF8DF51F17BB798FFF
-:10CAD000805B2C6E13A17B7120C129BE5C2FDAF61E
-:10CAE000B6552F9E867935007F2C3B703F56DD7EF4
-:10CAF00032546E6F9BEEABC9EF1DC87DA9D6BAB19B
-:10CB000003DE183C5F1BD36AC7FB50CD5A4A37DEA1
-:10CB1000BB5DD87599F206ED9AC38B76E1273CDEB2
-:10CB20006E8CCB566B7CFFF61637DDEF93F7DDE4AA
-:10CB30003D94E681692FD9F1DE1CD82F69307E65DE
-:10CB400099ED9C7EDF0ED3BD14D5546EFB59E6F6ED
-:10CB5000A3BAF6DF284C36E437837E534EDFE9E88C
-:10CB600052DC22CF97F2329AC5181D25772E46FF48
-:10CB700025E8715E84C3C29D0F0E623CCDDE65A5C3
-:10CB8000D8F9EFDBBDDB8F024B25ECB592BFE1B7E7
-:10CB90006D0AFFDE47058FE3AF15717C66F23348FF
-:10CBA0007FB88463C2033CFFC35E70B68CEE37D699
-:10CBB000AD1BCCE7B443FE0695AF8CC9EF6F5409AB
-:10CBC000BAAA0F5CEEC27ECB3D1643FE90D91FA1E0
-:10CBD00032739E3CCFE354359EC7A9FA789E7C22DF
-:10CBE000D3E87B1D895BAA099F551ACFE304254929
-:10CBF0007C778BE3A532700FE5F998FD088E02A3D0
-:10CC00001FC24C97667C9C36E1E33195DF4FEA3ECC
-:10CC100061F587E175F7434D3DE83F0F3F64213FE4
-:10CC2000C605991F028B447FFE0A16852FE9CBDDCE
-:10CC3000AD3C5F40E265C54E9E3742AD0C7EFB7455
-:10CC4000A6FF8EC70AE157B893F5D37D87D56CC888
-:10CC5000867CB0065DE956F4C778E9B99685B730A9
-:10CC6000825FA82713E67BAC75BC1FFDDA0337DAB9
-:10CC700052DEF4713B229EFE1A8BD7AAEC4D9D9F8B
-:10CC8000FFEF7EADF7EBD7B286E97EA9C71E99A26A
-:10CC90005CDDAFF5238C4BE8FC5A17768AEF6D8884
-:10CCA000FB1683B6D6493B5DD8CE4BE7E5983D2BC6
-:10CCB00016231D1CDBFB03B7B8FFBA69E2E8DF856A
-:10CCC000C8298A934F7A7C2EE379209943748FFA8E
-:10CCD0008CCD98971BF51305ECC22F139A57941A15
-:10CCE000D38F993B9AC7595C44FE237E5F5BFA99C8
-:10CCF0009A73430BF07DF125410F154A4481FD568F
-:10CD0000BA9417156F6C7E66CEA3FF7B3C8CCB0963
-:10CD1000840FE63325F0BCDAC14C567B380E7E26F4
-:10CD20001773393A383B3EFE643DE827F716A57283
-:10CD3000FB690CF72BFCCA3EBA5FE18BF1E846E2D7
-:10CD4000F7D07CED4B1CEFBC9C9413EAC0F69DA180
-:10CD500020E5EBBCD567F57620FC075A5F2B80F207
-:10CD6000927FB2BA311EFE61C7F952E7665E539CEC
-:10CD7000EFB280EF99685EF7A67AD4077BA57D268F
-:10CD8000F4C755E3746538928B4EF0F6DF7B76EE90
-:10CD9000BEB03AB2BE79F773757BF1FEADD437A160
-:10CDA000BC1ACBB23F0B574C2A057D766D8B8C2776
-:10CDB00056EC43FD363A5F78F93EB4872ED88CE3C3
-:10CDC0004B7DF5FF3EBB681F8E1794F38717ED432D
-:10CDD000FDF7ACA93D7D9F12C67BFDD9526ADFC825
-:10CDE000E4F8A5B4DFA85F31BC7135F63F6997E57B
-:10CDF000CF523EC1F64C3EDEB1E736EE45BFD147DD
-:10CE00006D3D1FF6F8EFB7FD487AFF191BCF1F0CD9
-:10CE1000839EF65826A651F65B39F369762BD07FB0
-:10CE200091A6D079F45BF48343FFA0CB22E8EE1FF8
-:10CE3000F6A24EBFAA44EEF320E5818C44771B0294
-:10CE4000CF3C6CF4173FB3CAB06EB6B11EFBCB75C6
-:10CE50009FC0F6B0EE551B3FEDC175AE92FE8D70D2
-:10CE6000E75EDC5F778AEC376DDF68F38602DBF71D
-:10CE7000E2BCABA2F37C85FAAF4A94E37DDD98BFB8
-:10CE800012DE4FFE8FD8BAD61BE0F9FC73FB099E69
-:10CE90004177640B9E0F410FA3F3F8CE960ECAEFB5
-:10CEA0008EF2117B2083F8C8132DEF35F2D17DB4BB
-:10CEB000EEEBBD2E384FD3E7E1F9E7E376E2F5DF9D
-:10CEC000379C93B8EF3E2E87241DD5B9653F803F30
-:10CED000C893B55E39EEDDF52DD3AFC7BCDCDE0DF2
-:10CEE000FE8A917E2BF90938C9C43FD7365EA7EB7D
-:10CEF0005ECAA36806B91E2F1F7BE35C45FA336F39
-:10CF000025781648FB9949BD63F13C9D5F8E79A356
-:10CF10007A47C53C32408C7A4737E659CDA27C2E01
-:10CF2000929B1AD4787479403717F3F85AA7C893AC
-:10CF3000CCDBCCD6EBEDEDFF399FAFE71BF3B9DCD3
-:10CF400094DFB73DBF41A13CB1CEBEEC3178DFEDFF
-:10CF50005CBA773BCAB5C14C0B7DA7E08CF8BEE646
-:10CF6000E0171D19F7C1FB53194E3FCAAB53293BBC
-:10CF7000E93B6AE7FC56419FDF7903F959E7570C13
-:10CF8000A35C917EC396EF77911FF0B4979773FFE0
-:10CF9000ED9937F01C633EF3FDCE00E931F65BE11D
-:10CFA00018C1BEE2FB9C45A2BE6ADB535FADC63131
-:10CFB00084FE22E5A7F9BE27FED8F4FA578F95EB39
-:10CFC0005F1EDECEC3863AAE58705C5E768EF05D34
-:10CFD000D85A797FD9A44F5599EE2733F11D54A91A
-:10CFE0008F174D68F4A31D57B4C1A81F9DEB79A1FD
-:10CFF000AF00ED5ABFD58DC7E4ED3E63BDD4C31677
-:10D00000F73C42F628E885867964FEEDEDACBF8BEF
-:10D01000EE857B5F3E6A9D18B35B3ADD55A4A7346D
-:10D02000FBA004FB39F9A5D2E47CD40FFAACF84597
-:10D03000589E7BAFDB07B4B35926D039ED57147D2A
-:10D040005ED0E6FDC6BC205E8EF9E3DBF61BF2E89F
-:10D05000C277AFC172D4CFC956EE473E8AFAC5D85F
-:10D0600052AA3FAF0A3F186BD88FE759CCAF779AD7
-:10D07000F83AEA27634BF6233D05A3E7DF0ECAFB28
-:10D080005BEE16EB613F23F9D1A97179F2DCF7135E
-:10D09000CEE0F781DE6F7BE0CF67893F83FCBC3356
-:10D0A000D7179D88748E117A1DE68B9BF93C39C089
-:10D0B000F3EFCAB4D95DA95EEEBF72007EB4D5D6D7
-:10D0C000D5E83788E5AB14D277D2D68E905F725B05
-:10D0D00080F3EF2BF346CF53592BF254461AA7A9EE
-:10D0E00084E7030C2AEE1A2E97AD0CE572E983D97A
-:10D0F0002E8C4DC976A525FC1C786F86761ACF1B21
-:10D10000B33FED02FAD388CFB8DF63A9A01D75271E
-:10D11000FF5EBDFC9EC9F914977F33BC5FDA27FC24
-:10D1200015E57F9EFFEC57F38CDF151D29FF2120AD
-:10D13000D69F57727DF21F1E4FD43484D710B4454A
-:10D14000FFE0B07C0891E720F32012033CEF4EE6AD
-:10D150004374865B097ED7FD9E8B38FF814EC706E0
-:10D16000904E6BB91C917476749E97D3DFDB7EA2D0
-:10D170003F4977D03E358072A486B72F7A9B7FF7E0
-:10D1800042EA17C9CF0DEDED984C72E8A6805E0E0D
-:10D19000B9A2F722330271E4D0F185DA27023AFB13
-:10D1A00008FA670752E3F69F1288633FFB66067D25
-:10D1B000346EF43EA7360DCBFFDDF320589F39EFD8
-:10D1C000849F17E6BC13A90F36FDEB2F5663DEC90B
-:10D1D00095055A15C713876F54AF1CE27A4E4C9FC2
-:10D1E000F4733BECFAEB8B8D34BFC8A7F910C6DFA4
-:10D1F000A81F5FEA4FF0FE9E802E8FE7A366BFC197
-:10D20000FAB6047471930FD0FF01DA9F88D7FC053A
-:10D21000D6FB30AD57E8FD1F41787E3B90FA915E1A
-:10D22000DF0BB4BE0A713ECF63F2DC7E89DE0FA352
-:10D23000836BA6FFD702BAB8B96EDCE3FAF946B23F
-:10D24000CFA1DD4FA87FC530FE39AD1F7794FE67B3
-:10D25000689E68BB68FFB37AFABC0E7CFE4B3D7ECD
-:10D260003F8473E4F7B4DFC97CFC378BA270FC0306
-:10D27000CD2BDEFFDD4F76553AF71623BC5A393DEC
-:10D280005D837E3DB598FB6743DC3F1B96709F2610
-:10D29000DE0FE17DD2A5F3385DDD92179C5E9C1F09
-:10D2A000B36FA3F6087B781FAE376A8FE040D30DCB
-:10D2B000727E9FDEDE58F82F07F7E17AAD0B79FB1F
-:10D2C0008262F71A94B3E632E82345B49F585EE6CB
-:10D2D0003C2C5F6D5C8CFFE33ACDF17F5DFDA2627B
-:10D2E00063FE02E9AFA0B7391D80E3D7EBAC131A98
-:10D2F000A15C59CCF557D03FE2DEEBAE2C8EFA1193
-:10D300002A8B75F918278256BA1F18D553C209649B
-:10D310004FC5F4A843FB8CF736BE4DE51281DFC63E
-:10D32000E2C3F5629D77D23E26887D5CBD7D88DABA
-:10D330007B78FB38F54DB4CE74BE4EE67AF9825553
-:10D34000170F434EB3609C17FF05E74CA96D593189
-:10D350007E23EA488FE2B542B9718FC4EFF7F7191F
-:10D36000ED43CE7F2B05BD6F2E3E528FF85BF9AE9D
-:10D370005CAF8DECC5BC681ED311E29FD3C21FE128
-:10D380002E81F6E9B4BE365ABF97AFEF4318BF8B74
-:10D39000C6671C3EB52C6C9B384A9E459FC03FF427
-:10D3A000BB9FFA39F9BA6A430AE9EBC126E068C0C3
-:10D3B00073FD0916D7CFF49562BBECFF15EAEF12A7
-:10D3C00076AC3FFE7DD9DDB1B8C96E6AEFE6F359A0
-:10D3D00041FE23DE02A1E30BF13B10B5E27BE3B596
-:10D3E000652A7D6FA1B6E0D252E107A1F8A68C8331
-:10D3F000973E3099E29B896509DC5E741AFF8E4581
-:10D4000070AD83BE2727BF5B2BF332AA98F1FB7266
-:10D4100071E25B067F8BF48B44BF27674D27FBD6F9
-:10D42000BE5FFCFD27D3F7E312DB18F9B71C5DFCE8
-:10D430001EB8394ED5B0A9F5B542CCFB506D149746
-:10D4400035C733CD7F0F63BE93696372281FE5F93B
-:10D45000E2D4581ECA5B7BB25DC88766FBF9AD910A
-:10D46000ECE73D46FB7950DACFDAF5B19F4F141B5C
-:10D47000EF0FECCF0DFE84F0AC6A74BE1D29295A63
-:10D480008A7E8477441EC5D987262C417F54B88F65
-:10D49000DF573827E2FC32DE7FB690B9DCF8DCE2F9
-:10D4A00020789E5D9712C123784C5773057E5750A4
-:10D4B000DAD10879F47F558A7D9AEDEDC402C0E790
-:10D4C0002C6233B2B3CFBADD1417A8EC11DF97107A
-:10D4D000F902D2CEAE14F7F8D796F17BD5E8B14376
-:10D4E0007A90DF0FAC1476B8B4C7077EC8147D1EDF
-:10D4F000C052E627FAAD01C2C0E772F13DC55A3706
-:10D50000DB828BFACD8CD01FE99CDAC3E9846D579E
-:10D51000E9EF5C9DED7B90CED591EE313884BF81F3
-:10D52000E4D8C40FC5CE7795E8CE8F6B386FC6515F
-:10D530007B95F37117DEFF4D8D7D5742DE9BDF9E9D
-:10D54000C2FD283797703F93F929BF1BF17EE5078D
-:10D55000C8CFAC128447CC9ECF2EB936F9398DFA9C
-:10D5600089EF56A4611C889F4BD34BB85EE01DC366
-:10D5700083B83DF6D1F300724B4689E7B2ABE711B1
-:10D58000CCC3F9CCFD2F0B7DA43937A495F0783F9F
-:10D59000D1AD39DE2FDB9D44FF549CF3F673255C3F
-:10D5A0007E9702895A7286DFE77FBD5D3B833ADE54
-:10D5B000C9F6727A9E52C3C998BFF59AB8CF0F8A3E
-:10D5C00016E533C9BC28396E6D5DE9990BBAF3AC29
-:10D5D00072D1A39467D6E93BF8B202EB3C27F2BDC7
-:10D5E0000693BD74CE858FF3EF4B2DAFB9EDCC050F
-:10D5F000DDF9615E2FE6458581D5379470BFE60B76
-:10D60000A58E81F979F8BD26CE874D7D67E93E4C20
-:10D610007D5B030BCDA0BC2915F17B6A1EFFFE428A
-:10D620006581958575EB1A3B5B5B57C2FD3ECD442A
-:10D63000A7B1BCC0167C5F6AD3C6E0DF9F94FE49E9
-:10D64000192F282DF915C5DD065318CD1FF4B00884
-:10D65000C6DD176AF7D88730EEE2F1927FA4A1C445
-:10D660004BEB6CEC3940EB490C5CA6F594AA00EF4F
-:10D6700071C3E12DF9A25BC05BB76F82F748FC5B19
-:10D68000B9484D46F8BE86F882763D826F8EA997DE
-:10D690005CEE38788FF62B2835C0DBE12937E0AD1A
-:10D6A00053FBDC18DC8FC473A3A87BABC7FA2AE258
-:10D6B000F15DC023233CC6CF83388EF8BA99B17F81
-:10D6C0002FE1DF9993F8AAEFE2DFBDAEEF2AA5EFD5
-:10D6D000C5D517DC664FA33880D28FF725D796358E
-:10D6E00030D4F7ED5A0A7DDF4EE26F6919E04FB78B
-:10D6F0005EE0C77D253ABDF303F8D71F27BC0B3D7D
-:10D70000F8C3F6FFC37C4F97C4D1CBFF52F187E13A
-:10D71000DFF3E1E7EECF84DC303FE5B93B627E33F7
-:10D720005BB2A6E503AC43F20DF26D8782F9938AF2
-:10D730000DE92C88FC8BF7D70A7EB105E3A1CD1E3D
-:10D74000D68F67E16EE423809BBD3CD38EFCD3B8BB
-:10D750002793E802ED7F82A738A75F8E9DD367E904
-:10D760007D0BA78BBF76DC07D6F30EADA74EDC2F63
-:10D77000F888C5A56E2A0F3AE6A37F563B40F2E52E
-:10D78000E83CB7944F19FCBB4DEF2F0E5AA4F1BCE7
-:10D7900031190F8D13FFF42A1F20FE698EAB8E14F2
-:10D7A0000F8D13FF34E8EB23C53F99294E6A8E7F16
-:10D7B0002EEEC9A6F8F3629F85BE532DF57E19F7AC
-:10D7C0007CA5E72995BE8B345D612999C3E3A33B12
-:10D7D000857F8CA156A7DBFFA90CFEFDEBDE34276D
-:10D7E000FDDD55FCC17C2C094F900F4E07CCDBB5FD
-:10D7F00088E76556651E36C3D52EEC926B82AB8CDE
-:10D80000AFDB7B94C866240D0F8BE6FFD97578B625
-:10D81000FBBE437864EA800BBFC7DDE81F4FF964A5
-:10D82000663C14F5F0BF4B59E49E437F9752E2BF2C
-:10D83000C8333C6F5095EB8B9337F817C7A777B376
-:10D84000336B147CCA38F64878BC252FB811F946DA
-:10D850007EBF49BE3F95C1E17B7E1A137FFFD4880E
-:10D860004F80BF46F7FA7DECC06665383D14897C71
-:10D87000CC225FF81ECA834FACF060DC2C0ADFF4C8
-:10D88000EF127C3B5BBDDBD13E3A5E66A37C9538F4
-:10D89000F4407FDFF66AF4300CEF7D1F0C7FAB0A9B
-:10D8A0001F5B9819873E3E305EAF824FBBF5504FED
-:10D8B00081371E9FBED0477CEAB7BA11AF129F12C4
-:10D8C000BFC3F1C9F50B89EF53F9DA37E7E7EBF19D
-:10D8D000AC3D81788EF16F98DB312CFE776F0E8B2B
-:10D8E0007C1618E749ECF7D4FCE8384FE1B8D59F2F
-:10D8F00088FFF74E0E9772B95BC7FA5F9C8876DF98
-:10D900000526F235FD2F7BD14FD3961D375FF3E40B
-:10D91000FD0AFF3B3D1E76C022CE578BCEDE3D8BEF
-:10D92000799B60DF9EC6BC4D78FE707E26EDB717F2
-:10D93000F337C7823E2EF23BEB706C9C07F4598C98
-:10D94000CB3335C4F05EFA207E9F65167E9FA5839B
-:10D95000E46E2C0FE31D531E062F5705A4BC714522
-:10D9600028EF261AFFF4840CF14F363362947705C2
-:10D970002143FC53E4E948F9B6595B100A1BE29FC6
-:10D98000E534FE993AD97E47A474BA3EFE591DD1BA
-:10D99000F4F1CDF01D54AE8B968354967EE8C70605
-:10D9A0001E08A11FDA3733F44BC493BC370F02486B
-:10D9B000C3BF436775B90FA21D0EF601D3F247D658
-:10D9C000AB3F2ACFFF0F526BA57D00800000000007
-:10D9D0001F8B080000000000000BE53C0D7454D5BF
-:10D9E00099F7CD7BF39364422621E200415F02E880
-:10D9F000D442187E020109BCF94932B62003048DD5
-:10DA000005E903722C746D1B6CA9B4AB9B81C4989F
-:10DA10000485D0B2DB9F6DB72342CFB1DAB371EB8F
-:10DA2000A944A41DA4555A2AC6363962976AA0296A
-:10DA3000075ADBA295D5EEE929FB7DDFBD77E6CD60
-:10DA4000CB84A0D03DF674389E97FBEE77EFFDBEF9
-:10DA5000EF7EFFF73E972F54185BC0E0E74D1A1A90
-:10DA6000630361F87302B6FDA651C6D8AAC9B25DB8
-:10DA70009934A631B6B840B6AB4D6321631D2E264E
-:10DA8000C6B30403F8579893DADB8DB09998C2585F
-:10DA900068B92AE06334FF6B6B24FCAE6408E65B74
-:10DAA000ED10EDC4CAA4E165EC634CB697527B4D12
-:10DAB000BA1DA7F69D8CAFBF3FF5B09980F1DF99F5
-:10DAC000139F605C03EFA23D7A7CFADF1FFEA7156F
-:10DAD00089CF6413FB3FE8F802BF6346154ECFF9C8
-:10DAE000FD7780EF5A928F031CDF0F207EF7103FE7
-:10DAF0009FE0F87D00F069237C7A009FC2BFFD7A29
-:10DB00002F5419BB71BDBF011DDFA47D9FC6E9B8AD
-:10DB10000CF84789EE20DF077BFF84908F31EC9F64
-:10DB2000C3E77BD529E428D164A2DC9F725AF60DA5
-:10DB3000DA0BFAE57A5BF49066C57F0BE9C9EA1265
-:10DB40003EFE77A97BCD4459A60D3F03F75D8EFFBE
-:10DB50003DF6678DFF3C8DEF72A6E1693D97E85772
-:10DB60000E6F237C33F42608BECF06DF28E82B3A5D
-:10DB7000DC914C58F8C1120F127FD27629F130D9BE
-:10DB8000A501976CEF20BDD959CEE71F7FF8E1249E
-:10DB9000E20FFC3B46FC9EC2F9F78FCE8F3F184246
-:10DBA0005E029C1F520EBF33C7F823CAD9070D5F10
-:10DBB000D83F35744D46FEFF1FD62BA6F5843EBDDB
-:10DBC000D7F1697D147E9F2D49F3776208DE8F0FB0
-:10DBD000EBD45FBDF1C9C8B5F0E79AE6475413E747
-:10DBE000051856CA587C9025B7C39A37B3A4CAC043
-:10DBF00087C58326F34DB3E835FB0AE1E1F23A44E9
-:10DC0000FB5B64FF562F92727D2289F145066FEF10
-:10DC10003ADCA734DEEC9B59782F3CEC7D44D01DD8
-:10DC20000C59F4E46ACFEF0F035F2CF150BA2DF8D2
-:10DC3000B3FAD35F9B847C585D21E7FD7612E779C8
-:10DC4000B558CEFB24ADBB3ABDCE0F783B5FC2FFCB
-:10DC500094E033780D985978257E417197C4EBB1E3
-:10DC6000C303B45F2E5FF2817173E0D9A40413B0D3
-:10DC70001F1FDBB84D35AD7681F5E821F06F77B029
-:10DC8000749BE42A63077A68DDAB8DD7E690E08F5A
-:10DC9000D0D3349E832C986056FC0EF0FDB9CAEBAD
-:10DCA0005BECC23D28B7579FEF29E7B516BE4B3D49
-:10DCB00058E34BEBB7C13CC0775DCEF36373A3F77A
-:10DCC000CAD705397FD86A4FAE9C8EBE5AA2E30DE3
-:10DCD000BE2F19FBF392996D7F2E1BBF4742167F13
-:10DCE000FE9EC787B2F5CC627F1E47BA5BBD252E6C
-:10DCF00094EF757E662401BF8BF85B9C798E0F2BA9
-:10DD0000649FD2FA59CDC7AFDCC59A7BA60D87BFF9
-:10DD100036EC20B8D667D8C61E982FE43ADF14B781
-:10DD2000C0A542BCFF5048A127D07788F8BF95E333
-:10DD3000772CA4D37A21A6310374AA61E5A4329486
-:10DD400083D65FF2F9983FC8561466E63B2BE693FC
-:10DD5000EB1C5E5ED868A5E327629D63214E07FA3F
-:10DD60007FE2E77D9C0EB5E86E3FCEAF16C8FCF2B1
-:10DD700077C4D776A76827DE22BF3690B6437F24C4
-:10DD8000795FE59672F90EE9BF8CD7DF0AFD6F3235
-:10DD9000B110F167CC31CB3AEE0F6407471B37283F
-:10DDA000FD459BD8AF447ABF4E21DEA38D57234A51
-:10DDB00033F1C9C3520AF80FD5EBDBDB05A4042A03
-:10DDC0008D7338FEE84CE3B797330FF0E93CEDCBA9
-:10DDD000E7B2F3114BFFDBA1AC7CE0FCDD719C07EB
-:10DDE0005676C3BEBDB2462D5D0F7CFB2BEE4F15A4
-:10DDF000E507B15CF2F5D7CCBEFC359415CF470AE8
-:10DE0000AB408FD8784770AA3E7C9C37AC4839131A
-:10DE1000FBA43D8274B4A7F58DB77716F3FEBCE77B
-:10DE20009CEB843E1584719DA7047F99AF14D76342
-:10DE3000D38EA6D4B9E05F59FA6738A0BD1EFF8221
-:10DE4000F50722A79C28076B3B14239943EE87E92B
-:10DE5000498798FFA1F4FE8D0F5F43F39A6CAEF0F3
-:10DE60001FF01BF8C4369AB7B14921FDB3EBCBE4E0
-:10DE700030E7DFE4709A4F93097F43C8EF9CF85472
-:10DE80006C032873CFCACCBF56E01D72C60F5D0B62
-:10DE900072D0DEA6E8688FD66D5DD7510E6DA639BB
-:10DEA0008353E17103720AC6B5FB2BBC68075E148D
-:10DEB000EBE17C2ED847F425FE1282631A3CE7C6BC
-:10DEC000361FC1E1EF4E37AB909EEAF8EE0892B5EF
-:10DED000A0F1C923F8BC15CC34C629DB167D3D1E44
-:10DEE00086FDEB9BEF0CA2A84174D63705F06A10B3
-:10DEF000786946FD393606B228170BA6E6A05FF70B
-:10DF000006B7C3FB86A64F2C61950013770E0D7ADA
-:10DF10009018935DACC079B5A1C100E7D945B07147
-:10DF2000CBB73A336DC40DFB3D99FE95D773FBB467
-:10DF30003A0CFCB4C8DD0F057D3F14FCDC0538F459
-:10DF40004DA3090A19EA0DDBE840FEAD1373F5B5E0
-:10DF5000ADFCC88700BF0B0116C4B61BE95333F4F0
-:10DF60009D9AA471FA98E15D3A0ED615FB7ABC052C
-:10DF70006CDD8D306D1BD009F468EA9AA294458E51
-:10DF80008F8F315910E3B640E20106721231773BB0
-:10DF900007018FEB9BDEDC8871DF5AD3ADD7038A94
-:10DFA000776CF4D5625CBBD2147C59E23C8D747BF7
-:10DFB000E01FF2C5953AF76317F279A1C2C6C3FC18
-:10DFC000CBA2BC5FF2C5CDB4D356BE68B6F6D6932D
-:10DFD000E53B7F6481FF4CB8B0F4CC87E18FD96C0E
-:10DFE000F645A0130CC852C4E74287E253CB09CCD4
-:10DFF000C1804E9787EFE3FE8ECD2FA29EAEF56BCC
-:10E0000041878EF831E25FA358E39D167DE78F20AC
-:10E01000568D6CDDDD8D727747BFCADC00D7BE66DA
-:10E020003FCE843F0FCEA709B970147CA34F0338AD
-:10E03000ED8B2AC3F5241F81DFBEB9F0FEF4008CFE
-:10E0400007D03BAA814FB0EEAD865BD7012E7FE1B2
-:10E050009B6DC8A77CD69C1A0BEDDBFC0E96F26478
-:10E06000E802BA13822F8E8B0AADA56B725D4756FC
-:10E070003FF125FF0B11C6D076278CBE2900B75C77
-:10E08000CA6D07DFCFE506DF0FB9AF2CCAE555EE45
-:10E090004BBE4D5EDDD5CE8C7CE69057FB3E246DAD
-:10E0A000FBB05FE37A72AA5FA5F8E8D49ED25BABBF
-:10E0B000811F893D0ED263C8D30E2845F0474A61BF
-:10E0C0001AF0FF76812FFD006E7F7371B2AB3CB307
-:10E0D0001FB7079EFFB352C938D4B88C3D6298C4AD
-:10E0E00042FB36D1BAFDAB8912D4D38FB11E27EAD9
-:10E0F000F59D6CD089F2FF714C0555B48F4117BE68
-:10E100006FF4F85CC8C7FD7B9E2B443B929AE02CD1
-:10E110003E13205561563B697F2227CE48BA01380D
-:10E1200025EDA7C7F4935DF6C293ECB4C1B05D5C76
-:10E130001BF59839FCC8E1D9E60B6807655BF33538
-:10E1400033C4E35BB3E33F217B29C6EB95C64FB1F4
-:10E15000FDBD59C6317C7E1BE33DF00FE7C3F7518F
-:10E160005EF2EE74E338DA35BB1D3B8D764CCFC8DA
-:10E17000C30A9B3C483B7602ED1874AD407D05BE5A
-:10E18000B1D895D9B153520E6E6237217F809E5F10
-:10E19000931FD1801EE0CB6BB8EF331856DF52AC23
-:10E1A00084C8D47D809F22F0C3F70AD87765EB0B33
-:10E1B0007F56C6F0F6028053C4BE621A598B7EE3C6
-:10E1C0003F821ECF64B417E609A4DBCE1770CC4E95
-:10E1D000CACBFCCF9F40B971143C3BC9CCE107D3FB
-:10E1E000FB7AB7F38D345DA84710C9231D0A331D90
-:10E1F00017911E1F2031FE5272912039685FAA10BC
-:10E200007DEDE5AC11ED791B76CD07795FAAF4A021
-:10E21000BC3F1E29E1F1D2141E17761527FD415E81
-:10E220006721781608B295D333F33E1E5109FEA636
-:10E230003946013A2E88FB285E92F1AA84F345788C
-:10E240005C3936C2E38C4065BC841C5D6990F80E75
-:10E2500071D4586A7B5349C7385117E13FDD618952
-:10E260002306262619C621F946EEB8E1BA48DAAFE8
-:10E270005F17413AF648BF6E5C8FEDC5637D0D6850
-:10E28000E75C80F7DEF28CBFFEFED2FB5558967D30
-:10E2900038524EF85537ED6E1D07FB1D0A4DF662DC
-:10E2A000D894AA49FA318EE81A0F7CC8A12F5B23B3
-:10E2B000DC0FCEB94EC0097E49BFEF81F0DB09EB20
-:10E2C000609AEFC038A08CC70177462A689C8C07FB
-:10E2D000003EE102B8D00D26CDD33E35F77A770A5D
-:10E2E0007E66FC6DB008ED3563CDE42FE2C29FBCC5
-:10E2F000D262BC36044239D012A327D8FFBE2818F8
-:10E30000B8135AA23098837FCB6AF779D06FB706DB
-:10E31000D67B0631FE3322346FE39AD06B43167BF3
-:10E32000DB55C626611C705BC32DAF0D59F4ADAF34
-:10E3300090E38B7E26E1CECCBB0AE504F03D127261
-:10E34000A7160343F3FD2CE956E8E9D4510F223A0E
-:10E35000F5C78D75CCC47CBCFA9446F5AF62968641
-:10E36000DF065B13093027E215F727198ECB8736B6
-:10E37000C2C717BE49F0CBAA5596B0E009F6672D83
-:10E38000C9812D5EDA850206F3B6CF5792DB61DED6
-:10E3900006FF5DE47FB62DCAA7F7B06ED20DEF6F12
-:10E3A0009DDA447E4BC657EDD16890FCD315C65319
-:10E3B0008767C7EF41BC5CFEB45DFD1CC97FC6AE7C
-:10E3C0006E8970BBFA797C2FEDC7DE23AF90FD809C
-:10E3D0001C84F8DC05FCFEAF1CFBB84DE84157314E
-:10E3E00097437BFFD784BCBE3B3DDE8AF31BE0D363
-:10E3F000FCB3DE7FBCD92EE34DC1C72BE50FF0E3A4
-:10E40000DF2216BB0CFCF84AA46A381FE0D786F658
-:10E410004295D6E2094543F9CF13CD479899C47187
-:10E420001ED64C40AA37CED0DF0D9F27C570DC6AC0
-:10E4300041DF7BB5C7FF09E10DB76BC61311CA0BEE
-:10E44000B93C4BBB0C7AC9FDEFFBB4DBFD0EB0A7AA
-:10E45000804F07BE9A9FE93F24F6B9B7CA3C84EBC8
-:10E46000DE50E65987FC7F5031FC5E15EB9E66233B
-:10E47000DA11A6CFCA1A377C9D6D34CF4085B91109
-:10E48000F59AE92B4681DF2ED6D5B9BFD0391DB01C
-:10E49000EE57F32767DAA3D1F5FD88F173C4BBD536
-:10E4A0008CFF0AF5EEA580434F28F4243DECAACE5C
-:10E4B0004B2AD02E9865BECAF711EC284CDD157892
-:10E4C0008BE2A2654B148AD396792083CB6127CF48
-:10E4D000087FB34CE7FDECA4E1B7D63B8AA38EECF2
-:10E4E000BC1744C2B0D62FA28EF5589797FE0CEBFE
-:10E4F00026B9F4EDBCD027D5FD6619DAD5979CB9BD
-:10E50000EDF65B1117C12951519710FE6F959BE7EE
-:10E5100057EC67809FC5BFF65685FF47D8AF84622A
-:10E52000F18B0313CF93BDA31ECBFB65A2EEC4FA00
-:10E53000B3E79174964459D6BA20AF8E28AF63A83A
-:10E54000514BFF2A95F1BA475F36BF001F4F94E247
-:10E550003F3634023EFB72E273221B9F9228DF9704
-:10E56000DE2AA304E703FF3C16D7EF0883FCE5E0AF
-:10E57000EF1333C2D762BFC6121D15E5978C5BAF90
-:10E580004338D9B6C4AD7A34DBBE9647B97DAD8881
-:10E59000927DCDBD6EA5E0DB95DA87F7ABF73B6CDE
-:10E5A000FA2E9F5D834F1554021E6E77E2B3A4AF1F
-:10E5B000D32E4FBF3F7E5DDF44A4F390904FB4ED68
-:10E5C000186F183A8F473E1DE5721CBA214970CF6B
-:10E5D0008C107FA4E1803158971B290E99FF3EE3F0
-:10E5E00090AE850305384FEBDB7B0B308F7F6628C1
-:10E5F0009C330E3954D64D78DAE390DE11E290BBAD
-:10E60000A23C5E3DF21B17C5153567B99FAF39DBDC
-:10E61000ADEA209F7747B9DD9E3FD4A79A202735E2
-:10E620001887C03CBD220E41F86D20BA91B7BB558A
-:10E63000C46BFED93E1A57036D8C43E68F108700DA
-:10E64000162ACADD819AAE5FE0BED9E97DA1D2DC8F
-:10E6500012B5E45BD5837D744E22C77505B6179855
-:10E66000B4CFD972737836B7BF99715CDEED702381
-:10E67000C957ADEA0D607DA093E507910FEFE48DDA
-:10E68000A964453CAFC1B8B8134181EECE9305C92A
-:10E6900004E6D51EDE7F6FFE98BDF894F6C723F41E
-:10E6A000E29DBCEB92220F328A60FCBDAA915A0C0B
-:10E6B000FEA073CA977C9C9ECDA4475B046FC2BB2F
-:10E6C00035CAA76FF6F37D90F1D78BAB148A0F6133
-:10E6D0009A254B017E9E98DF3587E78775AA97E0DC
-:10E6E0007604781C7973E23CD52FE60FBA741DDAF4
-:10E6F000F306EFE2F9A2FAECD1028CF73FAC311548
-:10E70000DEAF6A8BB7927C9E74513DC3807FA89F19
-:10E7100055FD3DC4B7822157569D231F2C59CA125F
-:10E72000B7B86C6DA6AE29CA6587E4D35E87783228
-:10E730002AF2CF4A36E322F0E502BBAF0369734FFA
-:10E740000D1F79940D1F2FEB0B9B66184FA37C4C6C
-:10E75000710E7EF769E057EF1B2EAA5BF4EED9F33A
-:10E76000D14AA02FD1AD515D57E6334059C972CC83
-:10E7700067910754973EBE1EE5F260A16C8341038A
-:10E78000BC0FA6CFEB37AD372CED63D1074EA3DF1F
-:10E790003B788D843FC7C7CB7662703DDED7383873
-:10E7A0009EB72F44D54713B4BF831AE5D15B7FEDE5
-:10E7B000CD651F8FD772FD92ED5BAB3773791D6509
-:10E7C0001CD8F557ADFA21C7E52D35774C077E1CCF
-:10E7D0001C72D0F910E459298C0F36CD305F47F800
-:10E7E000074F70BE1E7CE31E1FEE937BECE0E772CA
-:10E7F000D9F9DF0B7F94CEF36672FB016E4E43BFF7
-:10E80000B56BD133C72A619DE3F3A7CE528104E0F3
-:10E810008507E36539DE5D5B91A587B756BFACAE72
-:10E8200047FBF3C6E9865CFA5E1535FF944D0F3F52
-:10E83000176DEDD688FF25CFD7EFC57B3FA99AEEA0
-:10E840003E0DF6B7F7F70E86794AEF7491878F84FD
-:10E850005710F02AB92CBCF6CCCB216F8097ABF6C1
-:10E860009AE178BD54CB883F2F541A9EDAAAE178FA
-:10E870003251C75C20EC7DDEB92F51DDB177D0413C
-:10E88000C5930B437B55143D59FFEE3A518111104E
-:10E890005BBCE4948A2265DEA766E9DDBC13F95906
-:10E8A000ED3B9BC766B5576F9C98D143F86F457495
-:10E8B0007256DBEDBF29AB1D62B3B3DA0D4B6ECEE2
-:10E8C0009AAFD617C96AD7FB3F9A057F8BBE32AB8A
-:10E8D000FDD1C0EA2CF8A5C10D59FD35BEDD0F6094
-:10E8E000F9283E6DA63696913CCE44BE16F41B2404
-:10E8F0008F0F9EB8C7877291AA894F42791B28EC67
-:10E900002BC3FAF58BCEDCF9DA7DB5AAF4DF65E826
-:10E91000EF0DC6F335091FAA18CCAACB6FA8E5FEE8
-:10E92000796DAD92B34E60F7C7D20F4BBF6C5FDF0E
-:10E93000EE77EDFE76D987F67A78BD9FFBFD5542DE
-:10E940000E5A033FF762BEFE6203AF237495C5A95A
-:10E950006E3020FCF39155B74FC273B5FC8039D6A9
-:10E960005D9EF1D7914092FD1AEB3CBE249B3C1D6D
-:10E97000FB936CC374AA4B6B9169FCFD0DE2FD5DCA
-:10E98000F8043F5D67E19BDDFF863C337F5CC4326A
-:10E99000F14AC3BB46B408F0FB48D3935A293C2341
-:10E9A000DEC39AD50E1DAFF96DE9087EFA93B53630
-:10E9B0007DC271BD432B2EE9075E6FE175F7EFB79E
-:10E9C00078580AE83BD9E2A3E72F5BFCF4FEE51692
-:10E9D0009D9EED2D017AA65A82D4FF8B966A7AFE0F
-:10E9E000A8C5A0E7F32D317A1E6D8913DC4F5B1AA1
-:10E9F000E9F9B31693DEEF147AFA41C1C708C8BA31
-:10EA000042FC884321BE36E055DD05670DD56AE737
-:10EA100081AFFF9A8BAFEFD79FA46A7A26A29C8121
-:10EA2000BFCAA94F3DB532AE4FEF37E125E361CC08
-:10EA30005F504E649D0EF07B0CF173637DAEE4CAB3
-:10EA4000F13BA870BC0E16F3FA0DCEB3BC10EDF975
-:10EA5000D7E361B2E7D7CC247BEE675AB63D2F1FD0
-:10EA600066CFD791DEB1A35827C5FA229D53D8EAC5
-:10EA70002045753A8D93759045EFF23AC868F403D6
-:10EA8000DD47D16E49BB7DB974DBE93D3CDB7809DC
-:10EA9000E791FE7998FF30EF26FF512D7496696F4C
-:10EAA000539C5820E8D9757A4511DA173722C8F3F4
-:10EAB000748355E33E33791F60EFC6B2E1F3BE5E67
-:10EAC000D343FE7C473ACE7993E298E1FE2B9B0F2D
-:10EAD000180B59FD3BF0E15CB65FE47CA8559F1D27
-:10EAE000DC0EFEF9E020E375B239FCBC4EFAC183BE
-:10EAF00067791DE382A624196C5D983577CF83E78B
-:10EB000081FB59691CCF9B263982FB01B4E0B95EB9
-:10EB1000DD0370A141736C1EF457A7F2685C78C9DD
-:10EB2000CC24B61BE26F927D0A6BD97E1223D4B43B
-:10EB3000DFA1225889AD3D2103AFE2FE5664DA30F1
-:10EB4000EF27669B5A1DD0B5E27C33D3617E7719DF
-:10EB500073D2FD90E1FEFD6EC55267D358B003E954
-:10EB6000D0BEB0839FEBD9E44DF249D6DB641EFEE4
-:10EB700008337C7539E2873671EE623F6F796BBA84
-:10EB8000E94778C5F73C9DB7B08D8CDF8F70407E2C
-:10EB900082FC1BE34AEE2F1F2E77DF9B75CBA43A36
-:10EBA000AA532494AB93B7772B94B78BBC89E99F76
-:10EBB0007158F3189937D9F3A387849DDD897616A8
-:10EBC0009E0F3919E55BED4A7E70AF92C997C06F11
-:10EBD000CE40BA16D589F317D63C8F9FD3DD9F95CB
-:10EBE0002F8D88B7C84B9CE97D2FF39D29C8ECBBBE
-:10EBF000D7D5EDC77B8E9D33BFD1B81EF936D34331
-:10EC0000E79C4C4BE96877ECF4305F8295CECDEC15
-:10EC1000B7CAB433589FED806006CF7B1FC62F0163
-:10EC200060BEC2A0232BEE29AACE8EDB6EAF9376F8
-:10EC3000F6EAD0810240E7DB124F1617E7993CFE57
-:10EC4000F488F76D3AB7170CED9DE57CBDCD6B7878
-:10EC50007C96FD7F10F7C73D323E6A799B0FEBE053
-:10EC6000DD5E07E97787AE759643BBC3ABF1F84627
-:10EC700077C4729D43EDAA5304DD1C2F9FC04B0D3A
-:10EC8000ADA03868A4F5BA84BCC876FE34D3207D24
-:10EC9000D48371CC935BBDA50AD64765FFA63A45E0
-:10ECA000C84B37F1A153C455F9819E9403E56CFC20
-:10ECB0005DB3916D1E8893CEC07BCFB41E8AABBC72
-:10ECC000135C662EBCBF2CE6EB74066394F7173A10
-:10ECD00018E6FD9DE5B9FDE83FD7F138B3559F151E
-:10ECE00047F804F065AA321CEE53420E1E70821CD7
-:10ECF000C2FA9D536FA37B629D9318D9EF8AFAE9FC
-:10ED00008F6EF3E69043FD33B47F4E1F93E7EF59C8
-:10ED1000F7255AF586C675B0AEF6320BA2CDB0EB2C
-:10ED20009B73FC8AC67578DFA23A3F88F0B5EACFBC
-:10ED300012C8C7F620A37A8756DCE441BC1F2CD347
-:10ED4000E87E449AAF33CCC7D07E8C26DF767C60D9
-:10ED50003D92BB91F6D78E1F85F2B32E015F6C36C4
-:10ED6000C673CCF7CBB45E65CB977314F91A8D9E3E
-:10ED70002CFF5A96F1AF3FA9DBBC01EFA93DCC783F
-:10ED8000FFB1BA30E5FBF6F6D5D2F356ADBB11F7BD
-:10ED9000A5758A8BE4CF3EBEB39CE3D5F57C8D5838
-:10EDA000D7A7A0FCEFAC2EC943FBEE45436DE16B4A
-:10EDB000AAD23C5567F1DFC5D1661EB7D731925F45
-:10EDC000AF1EF74D01B9F0F6AB2053C077C75FDE39
-:10EDD0003DA5BF7F3EB26E83E4964C3B975BF61732
-:10EDE000E04B9110EB31ECA13E7E5F640BC1497E9C
-:10EDF000EDBAFE0FC1D425F8366661767DEABDD640
-:10EE00009F94FAC252E2731ECB433E5F60F729E43F
-:10EE1000BFA306E99D2F6D57F9BD9552D90472B075
-:10EE20004D22A764EA520CCF3D50BF4C46F10D4134
-:10EE30008E13475E44B78FC64D14D34CC00B352A92
-:10EE4000CA3FB7BB17D81B7C7D1886F756948483BE
-:10EE5000FCECF528D70057CECC3F9FCA719F679234
-:10EE6000AFE9C90DF09C582FEA69829ED1F821F1D3
-:10EE7000FE5BC9AD8C0FEC755459677D1AEBACCABB
-:10EE8000E87554A69D27BEC9F8D75E5705BF5680C2
-:10EE90007C7FE7068D7511DF79BC90C9F34D8FF546
-:10EEA000FE9DF497EDBE1559F5F97923D0FBD428D2
-:10EEB0007EB1AB1FEC26C6D1FEED549F3F7072FDB4
-:10EEC00051CCE32FF85D3AB3D8FFF6C2ECF3033927
-:10EED000EFF67A51871F5FC770BCD66732BCB7E7C1
-:10EEE000F207C92FB42AB9CF1DBAEA1DE2BCD1E698
-:10EEF000276CE733FF9DE74DBA2A58DA7FA8C23E58
-:10EF00004BFFCA34F0A2E3ACE3B91D95FC3820E214
-:10EF1000D1AEE736D13D03E6B7D47D2B72AC6F8F0F
-:10EF20001B0D43F7CDCDC4B1CA208F5FE5FAED22AA
-:10EF3000EF6E3DC9F7235FDC37B2D30BF1EF17EB70
-:10EF400081DE8280C356DFCAB637F678D8ED618994
-:10EF50007C8BFD8378B8A59EE284EC7876428CF1B8
-:10EF60007B41C526C3FA4FC46FAA58AF99DBDFAC0B
-:10EF700032A07BDEC94BEF47633D8F17DA03EBE32B
-:10EF80009837C9FAF3AE451F21FB0A7EB4BBDE6297
-:10EF900077E57D87F75A8F92F23A57EC637A7DFBDB
-:10EFA000BD94855BF8B9D1C97B8EA13C1E00794424
-:10EFB0003FDF5E98D8311DE3939755B65F1F5EBF64
-:10EFC000B2D325EB506363FCDE8ACBDF7E64B1C332
-:10EFD000C29FC1665527FE180CCF8934714E64AFAD
-:10EFE0003BB9DD4633FAEF548DD168AD3B4BBE35AE
-:10EFF0000A797EBDA699CEB19E1EE1DC58C2E1E73A
-:10F00000659887CB3A56D90CF359E4EFDCD86615EE
-:10F01000CD48757C33DDBF2CF81746F923CB5792CA
-:10F02000FB61A9E7163D43F9E59FFC8CEA6C2ECC09
-:10F030002F4B319FE4F9A5CC5BA59DA8559FE8A86F
-:10F04000C07B1DFD1ADDD32B786E9307E3DE50FFE6
-:10F0500006CAF10C655501EEA3BCB724F1BCD2FC85
-:10F06000B40AF353CBF94AC66EC47E8572D0D5126A
-:10F07000FF5514E4A3B7C5A0767B4B233DABB4A4E6
-:10F0800081F4540528E3630B86A0DF8247555F2C8B
-:10F09000ABDD5569FE86EB553CEBBDDB0FF359E468
-:10F0A00002F2E3730837F724E7A76B8942F711965A
-:10F0B0000DB207B86EFFC3D8A182D8D5B143BED870
-:10F0C00025ED103F67750D8A73569BBE3D5EAF936D
-:10F0D0001EA4F50ECF5BC9CF25683C9D19CE077ADB
-:10F0E000C67C92DBADCCBD0EFA9E3124BEB3BEF120
-:10F0F00068CD3E8C67DB5F95FDCBF719967E9688D1
-:10F100003661EDEF3026C71067761E2D6DA2EFB089
-:10F11000C5773491C6E2B20196B9EF68E7D74331BB
-:10F1200047D67D9A10E3F534D9BF3926F24320073C
-:10F13000EB76F2BE443EDE97C811BFFF9398EF5EB8
-:10F14000E453157E1FC2EF2B2CB67D1F62C42EFD2B
-:10F150007D4842F48FF63DC81D319E5F98623DFCAC
-:10F16000FE3F86F8C6F97718EBC57E2DE84FB68EC0
-:10F17000C120D1CF72CE138F713FFF428CDF7771E8
-:10F18000F90D0DF705E65B4172D0C8EF67CAFE05C1
-:10F1900067D3FDB7D17A0DBC7FC15993EA48F2BB62
-:10F1A000BC78ECC67DDBB4CCBD9C76AC4778F1FB7B
-:10F1B000147EDFE9DF059DF6A7FC3EE5369FB8DF4C
-:10F1C000C326EFC3DA66ABC1BFC7BC2576D35042B6
-:10F1D000A3F5EFA2F5C5F738D5825E78BF89DEDBEF
-:10F1E000FEBF024DB1B27DE23B9E4F115DCD1CEFE3
-:10F1F000F4FF2721319BE44BC257C7663509F8CF8E
-:10F2000012FC460E9F431E843C56119E9731DFFD33
-:10F2100084DF1A8EDF87627AD6F75F526E016E3B0B
-:10F22000C189EF83FAE31B3C68CFD3DFFD27A6ED4E
-:10F2300033A65C169F76D03CA65C8FF3497573BDF0
-:10F2400090F22FE5E1BB621F66C61429575FA6F155
-:10F250004D578DFE6F123F6DDF238D4647A032BEA6
-:10F260008FF0F0A7EF23EF8FE5D6CFF7848FFC7EEA
-:10F27000CCAE17CF0AFA61DDEFD13A6541BA9704F7
-:10F28000EB3E7535D685797F407CF0A4E7FD21B54E
-:10F29000AF705E56567A59F74AFE0FED913B6F609C
-:10F2A00046000000000000001F8B08000000000066
-:10F2B000000B93E46660F8510FC181486C62F11A4B
-:10F2C0007606866816068699AC0C0C15402CC74944
-:10F2D0009AFEE540FD8B80782E10CF00E2C940DC1D
-:10F2E00007C49D40DC02C49240F34480981F88B953
-:10F2F000809815881980F8370703C3370E8439378B
-:10F3000080620F48B41B84AD7810EC3340FF6F046B
-:10F31000E2AB6484C3281E1E389D9F81A15A00C1A0
-:10F3200017104495CFE047B0B94429B34B1AA81F32
-:10F3300000656D40B4800300000000000000000084
-:10F340001F8B080000000000000BE57D0B7854D5F2
-:10F35000B5F03A8F79666672124298842027103091
-:10F36000680A4380088AF51022624BED48A9622F93
-:10F37000B5038D80104854ACDC4ABF0C4C8020286B
-:10F38000415141910E0816156D44AC58D13B20B542
-:10F39000B4B56D6CB9D55AED0DB5AD2F0C8852FDD5
-:10F3A000FBEBE5EEB5F63E9973CECC24E0EBB7F778
-:10F3B0000F9FEEECB35F6BAFD75E7BEDB577DCB242
-:10F3C0000B0A07029CC49F0B006E7103C098743A2D
-:10F3D000F2C66FCC7F6834FBFDFFBA23DBF5743DCA
-:10F3E000331D0812D50330008A012EF0B25F59BDDB
-:10F3F000893F3FF2A7114500FB40010FFB945227C4
-:10F40000F6F91AEB67DF8710C172F9E781B2CE0017
-:10F41000B68B53BB2F036F972AD7CBB42ACC808CE3
-:10F42000DF0D2FFDCEFA19BCA989B53FF14180DA75
-:10F430003BE13053F850869468737210F6ABBED738
-:10F440005929F2E5C00607016F1D404D1ADE03AFD2
-:10F45000BC46F0EE5719BC7A96F1BD0CFEA234FC06
-:10F46000FBE01BF950C5E1376AD2F09F2E3C34FF18
-:10F47000BE002B9BF5272B5C003737C39315430049
-:10F4800056377B29BFBC59A37CA2394CF9952A6B0E
-:10F49000C2F0B0721B24E3AC7D6834AB6FF6C7FEDC
-:10F4A0000B54796D7977116BEF4DE7D540D896F70E
-:10F4B00096E9B63C03E75098CDFB2C319FE5CD0C87
-:10F4C000071E1CDF0BC69958FE6DC28B4FE02D1135
-:10F4D0001C7AF9208697D6E715466900976E4C4747
-:10F4E000F82A026E3DC958E3ACC0EC29309C8D1B54
-:10F4F0008A01B07A89DB016E65700F0B4C7A03428A
-:10F5000000F7B1FE5B59FF4AA8F5450F2B5F55EE9A
-:10F51000D615C4CB0EF52F9D6C0C2FFB87783B7353
-:10F5200003CFA7E7C5F296790E034B396BFFCB8269
-:10F530003B5E94181C890AB7EE91D2E374D3A59769
-:10F54000FE87B4D9F3CEFE2B74A316F9D4EC77085A
-:10F55000449769812F6EBF6731DCF6294CF76B8EBB
-:10F56000D36BBF8CFC51D676C80648A6CA33C7A950
-:10F57000D02393E3ACBC62830AC972FEBD88C94341
-:10F5800005FF155696D5FA635599F080759C41692B
-:10F59000BA54E8EE9932E38B8A8ACBE64B8C6FA0A3
-:10F5A000CD42E7419C41515ED6366BC48F37375709
-:10F5B00052BAAD596B27F9F94899DE5E9529877FD4
-:10F5C000453DC5DADDE202E2C3F876486E97B0BF8A
-:10F5D000E8F4992CBF666471F54D3AE6A7CBA817FD
-:10F5E0004CFE5E23E9C4DF71C6DFA8FF9CF271B355
-:10F5F000CBF80AF6B76AA42C2D433C57707EAF7047
-:10F60000A5BC83B1DFB64123E3D84FE4779D58AF63
-:10F6100062C8505D61E30EABE0FCFFCB31777851FF
-:10F620000F76CF7F71717BC528807C071F68A7C8C4
-:10F6300007DAF89EF9C01CE7D39687CF8EBFDA7A37
-:10F64000E4AF35915BDF40BDB1AD82EB0D275C25AA
-:10F650000353E1682093DF2A2A189F219D223DF35E
-:10F660009933BDBD3909AF321EBAAD394C7CB7AE46
-:10F6700059A774B5E04317F25409CB0B3E84A2D1CD
-:10F6800094CFB95EC1525A8FFA4E4B428CC1791B4E
-:10F69000F2E7B9F87DB96194B1E695661E5232D3AE
-:10F6A000FDEBB0BC94F20694217F9AE58FC40DD691
-:10F6B000BE50D49F243D124F3024DDE6E3F9C952F9
-:10F6C00097112FB3B65F6D18E3D3F5593E555B61C3
-:10F6D000ED8FF55F6585E719AA6FF6572F1D36E2A6
-:10F6E0002CBFCEC7FB6B955EFC5CFABF496A0BE38F
-:10F6F00042B3CAD1CF4D663EDE661855E971CA974E
-:10F700003E6CC4ADE5F0B0ADBC66695B3CCEF07656
-:10F710002744074B8CBE2553A26160F4F7459371D3
-:10F720005C6AD3F0717CA7E77707C1EBAFE0E555E2
-:10F73000D2EF8D84853E13A4DFC4117ED3BE510465
-:10F74000BFCA3F2FBBEE39C6AF4ABE3B4276461119
-:10F75000CB8C63E34D8B81CEE090C331407DA084A0
-:10F76000D5BF5BE5C0E43F06E75882B32E3A3D07BC
-:10F770009C712B9C261CBDC16DC2919B4FF9F84E0C
-:10F780007EAABD64EC6FC73316F775B82268E7F53B
-:10F79000413C313D001FDE66B8D8F73E5319EE7587
-:10F7A000A2DB74189CD96FD19452485AD6F14F9B62
-:10F7B000AE83313F86F0F61D694C9ABE2C3FD38A4A
-:10F7C000C7B1A29E93FFCCF9B933E6F75DDBFC40ED
-:10F7D0006D0B4783BDCF6F9D2F323D1AC8ACF74BE1
-:10F7E00089DBD1B593C67E1DF878E061FAAB00C71E
-:10F7F000AB4E8F57F015361E76A626B38E5758C7D8
-:10F80000C6F37E76F874CAA309AF2F03DEDB6CF073
-:10F81000DEE462729B85FE9F35BCA72A7F7EA67FB1
-:10F8200049FE2A7B96BF4FBBBF02FC95F1D3BB2A92
-:10F83000A42E60F85A74A1371997D27AEEF3C657FE
-:10F840001F2C62F45BF4EB51872F9031C3F8FA4B15
-:10F85000E9F1174A3AC19D8BBF73CD072069EBE7E9
-:10F86000FFD57C72E1F5B3D643A7AA5F97FDC14FE0
-:10F87000FBBBE5159044795A7EF042DA672E7F6E25
-:10F88000623F60FDB85ACF06834DAA40D819CBD14C
-:10F89000CEC0FEEB4ECDCEB8A919DA5B98D1F558A3
-:10F8A000284A76D17209A8FD1A66B72599FD32FA61
-:10F8B000F96DDE9901B2AB285DEE02B263463F7F7F
-:10F8C000409BC8A6E01F523812797FB9CFFC7E68F2
-:10F8D00032DAB9AB2BD877C61ACB83BC3FF63D8A58
-:10F8E000F5F386F0EFB9E0CAAB64F058F0EE732799
-:10F8F00063D9F4E3976599F0B351D85D37A3DDC5BB
-:10F9000014B2CFDF1643BBDA5FECD6B74A99EDA647
-:10F91000CBDCEE5F3FE427717469AC42FB8DCD7F99
-:10F92000FFA5F7416715AE836D868CED23DC35B0FE
-:10F93000D1B1DE07D086A375332C4D646BA6DF9161
-:10F94000BFD9AC1FD727A0BD16AAE4E513969D3FEB
-:10F9500021612D87111370DD35CBAF5C3686CA4B24
-:10F96000BCD117C7B3F14B98FE4C303C95A86D52F3
-:10F9700013D1333BBFACBFCA3B3DC960587FE91DC3
-:10F98000E55765C113A322D1D9CC97D6DBE56BA38C
-:10F99000C0DBCD028F6194718B5EF3F1AADD7ACD6D
-:10F9A0007726D76BFECAB6A588E7D27A88A09DBD18
-:10F9B0009EE12F6619DF5769D76F25AA7D5E9FD517
-:10F9C0007CEE04E30AB96FEEFE9DF27527C4666211
-:10F9D000FD12B18EFB2B9352ACAAF7F93BE79B6B60
-:10F9E000DE5F15F864E32CCC36CEE7859792001BDA
-:10F9F00067F4A73F8EBFDEAE274F15EFD0B0CDC066
-:10FA00007D359A9AB86FF6415D2445FBB91BC90F45
-:10FA100077BD801D621B35B46B120059F5995AE110
-:10FA20004EFBD3F07FCA8CFC6C7431D3C52FBF530F
-:10FA300070C0523F29078BFE9EC77E3907CE39A979
-:10FA4000A4DB83F0F7A9261C8142DBBCDE6F3E56A7
-:10FA50007000FD72DAD47CE861BCED4C8FA6987C16
-:10FA6000DDDBEC851493AF2DCD1AE57FC8E40DD313
-:10FA70007B98FC617A37DB2F62F9C6E608E5EF6C0C
-:10FA80001E4BE9EDCD067DBFAD7932E5D73547296F
-:10FA9000BFB6793AE5BBF1F9211BAF46F02B9BC706
-:10FAA000908A645C463FED6888303061257EB7C03F
-:10FAB0007FB33CE16919FD9ED37DE4DF0808FF8632
-:10FAC0009FD17730B63BA4C076C83DAF04CE8BC182
-:10FAD000F11545E6FE53B592E4C56FCACB7A20BF57
-:10FAE0008A2FC2D62DA672D582BA42E4775F847F70
-:10FAF0000F54AA4974C1048160C40D7C727B39958E
-:10FB0000A77CC3A90B15FB1B21F8A3352053BD35DA
-:10FB10003B787F4E3E1951BD4B6614036F50E5F59F
-:10FB2000927CBDAC1A752B7D6FD5641A77CD06DE3D
-:10FB3000DE57C9F8C6C2B7616510CD6367E8406992
-:10FB4000391BEFC7C1FD8306B3741DDBDAE0FA751C
-:10FB5000EF9AAD85332D7E24AFC2EDF360DDD6A9DB
-:10FB600015AC1E1BD6C0719535FEE4D672A28782F5
-:10FB7000F09DE5E3F007BD7CDE4A0324715D32CBE6
-:10FB8000CF2EE03004B58811ADB27C178A27A827A4
-:10FB900097F9B15D2B44B6EAE9F24AB39D616F571C
-:10FBA00069B68BB7EFA7764B583B48970F2B10F0F1
-:10FBB000C0485BBB61269CB04CA676717BBBA1A202
-:10FBC0009D39FF61DB3A24AB9C0DDDD02971B9B1C1
-:10FBD000D32517FF8C0021B7FBE3D249C4473BCFA5
-:10FBE0004B92B7F52423D5D93BEC723D2CE990F329
-:10FBF0000D6E9B1F3D8AB2CBE8B156D06B53537646
-:10FC00007AAD558F1D44FB44D9A1DAF069D269ADB4
-:10FC100057D0B1C94E47934E6B3541C7A8838E026A
-:10FC2000EF6B4D7ACDC84EAFB539E8B5D6A457CCF9
-:10FC3000DECEA4D7DA1CF45A6BD26B5A767A39E945
-:10FC4000316C5B8CD69D34DD2294FFACE8E1D40BA3
-:10FC5000CFC93A7D97D71BDA04D40FF52ADF275591
-:10FC6000A600F7035056D88BDD1A17F64913E0BAF1
-:10FC7000700BFE6AB1CBEF75F3FC9589C313D00E00
-:10FC80000F75DBE1FB27A03F6C9328BF2E7182CA62
-:10FC90001F97A33185FA4BF2F11DF8F24493B0811E
-:10FCA0008154AE6A175730BE285F2347E21639F0F9
-:10FCB00080892710E737A7C6FF005CFF2078270759
-:10FCC0009F129CD72B84CF24CD3B034EB6BFDCC004
-:10FCD000F635A582BF4B9B189CF0E9C309F57CBDA6
-:10FCE000E85E9F859DE482ECFD54AC916D7A765080
-:10FCF0008BDF96D79714DAF2672C2AB5F15559C3E2
-:10FD0000205BBEB4FE2C5B3E3CA3DA962F9E76AE03
-:10FD1000ADBFA229B5B6F20C7E11F96DCA4B4B6D81
-:10FD2000FC121F5A8BFBB64DA27C4762682DEEDB9E
-:10FD30007A2BFFFA55AAE165F8578BDCB4FE300A3E
-:10FD4000127E4C7CE56B1077A3BC16059217B1723E
-:10FD5000BF66C4C91FA019807684ACC528EF0ADB32
-:10FD6000D7A7AFA1A1C4F8F4EBEB54E8A57FE3E378
-:10FD7000F4DFDBBC9CFC62AEEF4A115F4FD7B1ED04
-:10FD80009284E7224C3FE23AEE62668E2F847C2119
-:10FD9000F887F133EA154D9584FC9E9E9C0D6CB559
-:10FDA000EB9B01717BBEFF62FB7C4E95BF3F2FF941
-:10FDB000ED0D7F6B2112574E017F115512E7D5A72C
-:10FDC00027FFE11976FC144F733BE4C4A1CF3F67D2
-:10FDD000FCB598EB0568B5B8FE065AB80FE5DE35F8
-:10FDE000FBB55816FC99FCB2AEAEDA6FB543206293
-:10FDF00099D7A0F4389457B2E5BF687C929C40F63E
-:10FE0000F15C36FF72B46372CC5FD07BEDF8FDBE5F
-:10FE10007FA5F9A7E9FC83D36A1FEE86B74CA3FD43
-:10FE20009A9977ECCB32DBC7B9BE89F964AB9E6493
-:10FE30003F952AE3B310F82388E7F77DA1E190CF3F
-:10FE4000F6875E9E7ED6FBB67BEBF87E26FE725E64
-:10FE50007208E253C471DCF2F2979244F7F132DC9B
-:10FE600081E5553295DFE00F6D45B8BEA9C46E50EF
-:10FE7000FB22BC6724F1BC18D44E6DEA972CF31416
-:10FE8000769139FF5CF6D1B296EBECEB194CABB541
-:10FE9000F2E39D2D2BA99CD91D2D2AD1EB8B621F3E
-:10FEA000E58473A3FA05B68FCCF30167FB7F15FBDE
-:10FEB000E8A0DAB0CC6E1FEDE17410E5CFB5ECA987
-:10FEC0003D9572D33EF207DC621FEFB05F2A997D49
-:10FED00084E7470161BF5426C95EF15526B9FD523A
-:10FEE00069DA33F6F5EA1A3440C7A4EDA31EFA37EF
-:10FEF0003E4EFFBDCD2BD7FAEE0B98F6511BB78FB8
-:10FF000018EE31CE44A9E47E0EC5B1BE8F76E55819
-:10FF1000DFFFD7D847D9E5B737FCAD85366E1FF57B
-:10FF200082BF69B9F0F72F6E1FED50E1FF33FB2858
-:10FF3000179FFCEFB68FD274FE74EC1CA75D63DADA
-:10FF4000119FB57D63DA27CC8EA954516E999D859A
-:10FF500076CCFB72BBF70E369F1B944E2F2E8AB7C2
-:10FF60000A795DAC46D7B968FDEE247FFF06D4E779
-:10FF70007D859EC5F601119FA74600ED9DC56A6C63
-:10FF800083CB720EA1043AB558E08B870766E7D998
-:10FF9000E72FF062E261B7AB40D0BBE99C289FD766
-:10FFA000A38407E8E4768CDAE9C5F449B1BEDD9BA9
-:10FFB000810F20BB5119AB27511FB0F64FBAFADAA7
-:10FFC000F0E2B5E185AD437C3C50A236BB91A7FE83
-:10FFD000D19A84FE7296ED40FEA5F3721DFDC26DAE
-:10FFE000938732F8FBC4565C83F198C1972F7E0348
-:10FFF000E31AFB74CEA4F8C696AAEA83B5AC5E7E7B
-:020000022000DC
-:1000000044BB74928EEB2A905F71157646EB2624E2
-:100010002604C4394E29C06F969F10EBA60176BB0B
-:100020005CD655D39F3428B7BCB01FE9A427B37D55
-:100030002EF97059E59AE4F3DA53934FA1F7E3EC04
-:100040001FEA8B02473FF9867D5D088225CFCA3FB4
-:10005000107CCC2C94CF653C0D6EF5EA8C3F5C1582
-:10006000B286F191F9A01520FFF9EB5448A1FFA544
-:10007000E8581C5DB0BDD1A505FDE87C3F0A975A44
-:10008000F613413797D7F0AC96F215ACDF13A3798E
-:10009000FC7D1F8DFD579D399FD542BEBAF3555B40
-:1000A000E9DC34C1F86910DFDFD03D825515BB347F
-:1000B000AB9E1EE1966CF7082CFB365DAD11F63455
-:1000C000C38F52211B68077C52FE503E267FE44DB1
-:1000D000B1DB09A74BAFF1E25EC5A9F2C7271DCF7F
-:1000E000A46BA65C2D1574ADF7A2DDBF223CB5C78D
-:1000F00073D44CBADE4A74F5578091CCD2FF04B762
-:1001000094357ED6B93F72DAEB4ABF9AE95B7AA2A0
-:100110005B91D3AEE5FDFA162BFA5F5179A91AADC2
-:10012000035ED1DF2AFDD638EACF13A813193E9417
-:10013000B6912971FE18D9CEAB50FC874F37489F36
-:10014000D279774D1A3E77997DBFA616F9ED76E103
-:10015000F4B86485DFB7D84D7078713CD4D31AD029
-:10016000B9A71AE0FEBD8CFDA3C36E5859569D3544
-:10017000CE40FDB4F6ABD3ECF09E72BB80AAFFDD9F
-:100180006C93454FA7DBA9F0778B3DB506F9DD42AF
-:10019000FF152ED823B1753811BE0C623ACB6351CE
-:1001A00009402BA6E3900FABB97DB743A2F36012D1
-:1001B000691DFFE3E74457B875EA47F6C6084F4A9A
-:1001C000C000AAAF9FDA39D2FB0378DCD220096CD9
-:1001D000F51F74BBA95C8528609CE2FBAF5C14A68C
-:1001E0007E0DF6A9260D87B3DF2BDCB107DDD84ED7
-:1001F000E3F060035AC7C772BF40D8CBDBBD3F7383
-:100200002AC571E5826F43333F5FEFCE8BB82C6810
-:100210003DB5B8AEF7D9981D55C4FF7EDCD7421B5B
-:10022000B787060A9A6D595248DFB7B4F42CE777BE
-:100230000939DF8CF69187EE55D8E47E9B8837DB51
-:100240002E81ED9EC5100F8FCF7A4BC8FD166FDC47
-:1002500047F7159E59E51B8AF12E8794888FE1A1F7
-:10026000E22AA330D6031E86B4D9E5ED74E33B5EE3
-:1002700076678FEFC8D5DE8CEBF8A47821DBAC1461
-:10028000F1303B41FB96D405249F25826F4AD8FE6E
-:1002900005F5D0C0382475ACFBE149B0F207FBD9B5
-:1002A0008F7E8AD27A3616D22B26D3B974E9EDEE38
-:1002B000A44CF2AEDD84EDC387141E6B0846606665
-:1002C0000DB12AB50F2BCF4D40511B2CEC33586389
-:1002D000BF7751B6C47E5FAAD4714F228CF65D08F9
-:1002E000FDAE967AE59F9C1E210FA3C7D99F3F3D87
-:1002F000B6A9865FB3B4AF9020DA9EA5BF0A0FB748
-:100300003B2AD6ADE77160F50178D5B25FDC2E19D6
-:1003100085B8186C6EDBBA14CFD9E2F51019C2F0AB
-:10032000DDBF01642B1F8FF2E4513F2E30E26732B4
-:10033000BC2DFFF6659D4F215DC7834D8F65D11F95
-:10034000A33C4C5E5C455C7F6C6B9BCAD30F155A1B
-:100350003FC24B20B98C8158178B2D7521FDE702C8
-:10036000C5A187EB9BF6617C754903447018C6579D
-:10037000C45FE1E99034885FE05098F1C7003E1512
-:1003800018807C81EBCF224E5F932F4A1BECF76DD8
-:10039000C2F5F67CB1B0FB8B9DF7B71CFD94E8FC71
-:1003A0001E94BE4406BCF707D3ECF76DC2D079FFAC
-:1003B0008F10BE0381480AF935EE18C7D1BF0AB1C4
-:1003C000CB3C0C9F8F7D7FCA2FCF64F57FB8A4B63E
-:1003D0000FE2658B379A4FF78A5AB3C79D65F0AB2A
-:1003E0006977E4A89FD6A3715B5CB3335D31A4F851
-:1003F000BA590C8E55410348AFC5AF20FDAE08F980
-:100400007DA6E4322FC6932E0F54537CD83ECCB336
-:10041000747978683F6BBC9822E277CD7C42E853D0
-:10042000E778D77BB81EFD3B18D7231E467A62615A
-:100430009CB72B5CFCE84C9DCE0B8D649676733C90
-:100440007E6E5FEAEA3FADF8670BB8467208705AF5
-:10045000FE85599E582BF267BC966D2790FF074189
-:100460003281F46F6A137EF7EE7A378B7A71BC773C
-:10047000D95D2FD606D67D27AB772BCE87D5336CAB
-:10048000F5A219F5EE14F5C036AE9131EE26133E05
-:10049000B0F617C9E86F8BE88FECC1EE7A7A467F29
-:1004A000F789FE0C5B3D2DA3DE83267CB671C13E31
-:1004B0006E77F959EE6482F4368FA7DF3F6412F14C
-:1004C000CB81219326CF62E35CF70B97D01157D2F3
-:1004D000BA6DF2D53E51AF05F9AA8AE2F05A1BF087
-:1004E0001EB0B8279C084CF5C62CDFBBF92A305546
-:1004F000CBFE7D96ADBEDAEA0363147DA7FA2D1F0D
-:10050000293CBE395E5087FEB89545B28877FE5BC0
-:10051000C250991EEBABDAF2AD615E3EDCFBB74434
-:100520001CEF14897B304C573E596591EFEEF13F3B
-:100530002FF8C579461AFE77134685157E9E37E15A
-:1005400037F3DE125E5EDDFAEE44BC5865DE03185A
-:10055000DCDAA785FC175FD8F9492DF6F9F17C7A2A
-:100560007E3C6FCE6F74AB54F7AF35BFFC163BFFCC
-:10057000F17C7A7E3C6FCEAFA635FFB4E6E7AC8760
-:10058000F79550CFAF1A725F18D79D55B890B27ECD
-:10059000C7B6BE9058CAF237F535ED6D9DF4FB48ED
-:1005A00030CEF28EE9BDDDAF30F8AD2FC6ADF2F33F
-:1005B0006018E216E7C16D61F473BEE6D1441C1DFC
-:1005C0008753F1DAF30331DF379D67BFFC13D7613F
-:1005D0000C53E4FB49879EEF655D5B5EC2D79315C4
-:1005E000C1886C5DD7CC38E867FAD690FE49685C64
-:1005F000FFECEB2BF451115BD7B83F8FEABB84BE05
-:10060000BAB599BF17D026EEC3268AAA093F6DE670
-:100610007DD8F8249B7EDB3F61D241F45F1D3FC44F
-:10062000DF8978C2CBD7BDE5CDD0CEDF3DF0D2BDDE
-:10063000EEA759BF3156612FB3F730FD29B3F7301C
-:10064000DDD31CA6F427CD3AA5BBD8B8983EDC1C58
-:1006500081181B7F67F3584AEF14FBABDB85DFF78C
-:10066000CB4532F92DB634334BD985FE5F2FA5F734
-:10067000346B6BD421E8FF0D53FEB834758E97F6BA
-:10068000AF9D897C06E763BFABA07BE2E38B545A46
-:100690007F414D29F9A3D3DF4DBC1E976A1BB0DD06
-:1006A000B96199D7F32613A1ECF5AEC17A63C32AD9
-:1006B000C10381B8122ACA5AEF7BC85F3501D19FA6
-:1006C000164B04B3F77723F6571D10FD15E9894043
-:1006D000F6FEE2D8DF708DE301C29DCBF2B2D75BAC
-:1006E0008EF5AA3431DFB2949C977DDC9BB05E61BD
-:1006F000611BDDDFB96006903DEA2AD2B790CF4298
-:10070000D44BF68D82CCF8BCB04F5B13D63B3F1672
-:1007100081416C7C3D140199F1B32BC0CAABF02E22
-:1007200039EB87A5E74D63E5AC5E12CBBF6429C703
-:10073000F62C1D375DB4CFB7979BE3B95AA1FBFEEA
-:10074000345E1A77B5D8F3053297CF075AAFA8436E
-:10075000B92F10E74FBFC63C1BD7B5044C7DC4EB87
-:10076000FB79F95366FD102F7F45E40B0BF9BC7D37
-:1007700093BC142F7CCFF5434B6655A5E73BE07B3C
-:1007800095C36659E677CFF7CE2D991548CF67C048
-:100790000DE387CDEA61DFD367B2DCFD2609EAAD60
-:1007A00082B62AD29F233D51B20F47F6AB31509EFD
-:1007B00095351CAEB7BDE52DCB54822B4EF73405D5
-:1007C0005C772FB0C3D57FA11DAEBB17DAE1EADF9E
-:1007D000D8335C4F78B95ECB051F1BDFB08EBFF9F5
-:1007E000DFEDE39FF17DFBF89BBF6F1FFF8C1B3F8D
-:1007F000F1F8292B5D365D631FBFEC5AFBF89BAE09
-:10080000B58F5F76DD271BFFD3B2C7CFF7C6FEE9F2
-:1008100015F6AE62B53B9B6236FB94D53B29EAF1F7
-:1008200073F46E7B3C66B34F593DD527EC5D5BBDE1
-:1008300068463D9F4FD8BBB6718D8C7143A2BF9463
-:100840006CED2F92D15F1F518FEEADA4EDF18CFEB8
-:10085000C2625CC3564FCBA837C084CF362ED8C7F0
-:100860000511077603C6814942DE59FDC533D83EDE
-:10087000BB1CF7A15109F7FB5A1F1879807D87C16E
-:10088000FCDDA382498B07E27A2E4D5A7C26AE7F8F
-:10089000AD0560DBB74DF2713FC2189F42A99607C4
-:1008A0004DE4BFF336955C6AB9F7BA59D4EB2E0F15
-:1008B00034957CC3527E9168DF2AEE0DD6F97E4BCB
-:1008C000F688D69FD5CFE237BBD8EC4F944351A4DE
-:1008D000C36070DF79C5D43156FDBCD9E7A2F96B8E
-:1008E00003C5B865D9E16A2DE7E3DE83E306F0BB13
-:1008F000697F349510BE359E9ADF6F0FCE96FE8AC3
-:1009000058DDE6A575DD2DD6F50277D38FCA191C03
-:10091000890132E0FD8695653DFB735A9AEDE70B40
-:10092000AA163570DF573A57AB46F1C8D5EEAEC9B7
-:10093000F2E46CE70FF5623E2D736BDBF0BE0E1C2C
-:10094000B0FB71198383F53EF215EE58BD2F9B1F46
-:10095000B7C56BB36F0A8A7BBEFF65DE93EA9E075D
-:10096000EB281BDD56FBC4F9C821AFCDDE2A289445
-:1009700069DF79A28A9F1B40BC84FC84DD782DADA1
-:10098000F55AC75FE518CF07530D5C077099427998
-:100990007157F07755FC456D5AB98EFE830E3A0FAC
-:1009A0000471DFCDECB7253C95F6E327C43D5835FF
-:1009B000DC3681FB1D057C9AD055629CD20D2AA4A1
-:1009C000FAB0B15DB1D5BE3156BAC5E95ED0FBAE65
-:1009D000E4C5F4DE5339A3BF9439FF3B7CDC5F7C74
-:1009E000973EF5B7E559E87B373A8B2DFD967EE0CB
-:1009F00086D4A8DCF5D3F5385CDD7C1B66FC8AF276
-:100A0000AF0BBE751B3FF4658BB730F58338079F7E
-:100A10003516C48F7EF99FD83CAE3EE8E2EF2E88B3
-:100A2000FB36E6F9D0D5C26F3A4BF85DEB211AC21E
-:100A3000C2B741A67B496FC3EF42A32CF47FD2E734
-:100A4000E670B5BAC8DF659EFB5ED5E6B2F9C3E6CF
-:100A50006CB0E767C3D462D45BB3D7BBC8BF76B50D
-:100A6000C34FFBA098EF1C685A8176BC796F7B96C8
-:100A7000062ABECBB3E0F17B6AF07ED47E1FBFBFF7
-:100A8000F726E31BDD226FF3024937DE037875F7A3
-:100A9000A8CBCE036C9F5C518AFAB600B2BEFBF6BF
-:100AA000DD563B7CBDC1EF841760598F70A83BA415
-:100AB000ACFEAD0E9F794ECCE9952BCEC38CBB38E6
-:100AC0002EF8A8DB0FF3E73CE187E1F117BDB57F16
-:100AD000BF97F60BBC9D6E949F46B569B224A7CF15
-:100AE000A73CAE98D19FCDD3B56742AA3FD8EAB50F
-:100AF000F65CEFD824207DD914453E32EB2D045608
-:100B00000FE572EFA5715BBD0A566F70EE7A5D421C
-:100B1000AFFE7CE7BD6EF447BEFDC0E14B502EE753
-:100B20003FA980978DDBB5330829DAC726DDB89F4A
-:100B30009BB75BC97A9E4B1103ACFFF93F0ED27A8B
-:100B4000396F97273985B59FF793578703C343D7E5
-:100B5000B263CFF6C775F701899FABC63B87E3BA8F
-:100B6000364F85EF44B3F4D7D7CFF9F0C81379D314
-:100B700091CED28E7D5752BFED97BB3C167D11F0C2
-:100B8000BBCC7ADC1F77BF941C92459F98E76047E7
-:100B9000EE97387C7B5C491FC2B7638B3BC6E0682D
-:100BA000DCF10EF1D5C41F3F14423C34EE516C7E93
-:100BB000E2C61D4ACA339CD2C31EBA8F6A04A41A65
-:100BC000C427D78F0B772F20FFF9C2F6D5EF282146
-:100BD0006C6FE76F8697480AF1FA82129982F9479B
-:100BE0007F14D219AADEECD81E42BCB27E67BAF3DB
-:100BF000F11CD8EEF7C6FE3F28CCEC0FE0981BF9AD
-:100C0000ABB17D151F6FF7D75E43FDD2E890A337D8
-:100C1000F19792CC7397F3FD8E73B01D7D4EC9BED4
-:100C20009CFFD089CD7136EE915D6F6D8E33F81BD0
-:100C3000FEFBDDCD37A21DF4B44F433DD0F8C07F9D
-:100C400086C0B26E5EEEE7F2D875FF8FEEBB8BC941
-:100C500047D71F3DB47E743DF5DA193A9B77D72309
-:100C6000FFA75867F5173D7521F90B163D36B15FA3
-:100C70004FEB27F26BD2FA2E99B87FAEEF61E3F417
-:100C800063D9BD2275D0E799DD0AF8189C6FBFE8DB
-:100C9000A17B528DECDBE26AA4D702D2CB985FC273
-:100CA000F0BC70E7CA7794E1D9F01DEF2FE3A503FC
-:100CB000606218467A7FE3EBE78FC6D445E72B8D59
-:100CC000708CF4AAB35DE32146D711B9E978023EEE
-:100CD0007463DC4AE3CE557CDC7646C750261DDFC4
-:100CE000C65FC665D2F17B0E3A9E80861FE2F92070
-:100CF000ECEE93F55CD83C3F5BF0D8377BB4B74C57
-:100D0000BDD01B9EE74A1CAE5ABFB1C28FF2B5EBF5
-:100D1000C1FBEE2AE2749EC210D3F5D08933F052A3
-:100D2000F7EBAE6357A27E3CF69447C3F57EDE53E5
-:100D30002F90BC753DF6BC5B27FB1B0212B337BA84
-:100D4000A0FBA703ED8F8512CF346E0BA63CA13418
-:100D5000BD16262F9DAC87E8FB61FA9EE472B03089
-:100D6000B96F9A94857E4FFBF97D6E48F625BC2CB1
-:100D7000D8F627379D835BE82A8D457A1E9E84DF4F
-:100D800073D1D39CBF86F33FC742D76D5C7E73C9D6
-:100D900069D7168F8A710D4E3A77B9F83EA131297D
-:100DA000BD908DEEE63A78BAE7AA4F38E55BCCBB4A
-:100DB00037F9EE7D3EA787AF1D7EDDC63726DE8E76
-:100DC0007C985DEF1FF24B028EA6C9A58333D741F5
-:100DD00015A2F1FEE569788FD0DB642C7D40A1F788
-:100DE0004E57B43F43FADBA92716E6B0B3FF26F40B
-:100DF000D3C23DFB86A33E3BB2FF09E2C7853B0F52
-:100E0000BB717FF3EC8E47DD9D5569FEC775C1FA56
-:100E1000BEC59187F70D27FD8DFD67A1CF71D17FED
-:100E2000E35E7BFF8D3BDFB1F53F3FDEEE26FF6AE1
-:100E30002FE3BCA91A97E37CDFEC7001BE9BF4663C
-:100E4000BB32399B1DF4825817BBE36A82352FA24F
-:100E50007F522974EBA8FF5A961A2FE0BB89F1E75D
-:100E60005DFCDD4AD578D1C3E43351E0D671DFDBD8
-:100E700012BC0C748B1E6F73E0532BD226E07E40A5
-:100E8000AB8B8EB6EEBF4CF80B0CD906FFA2E0E49C
-:100E90007EF8DE15EEE3747C27568D70FF7568D200
-:100EA00064BAF7A8C99A2FEBBACDFB43BF1DF2BFB6
-:100EB0004B9341B7F0D7C889979D8D2E3B1574DBB6
-:100EC0007E605D1D3F0F36E7BF6E006CC2C723D644
-:100ED000493CDE3F7E318F3334ED3B70DCFF72DA0C
-:100EE0007B60183AEA2352473A1FDFB0DC734EC7E3
-:100EF000F1822E533C738436012AC42808C38B71B7
-:100F0000B68371DFD54E6980A9374CC7E70DE2FC87
-:100F10000DC7287FEBE4BF50DC63515E74645E5FF5
-:100F2000CC178A771452B4CF13CF06809C5756D271
-:100F3000933E803AF588D59FE4814DB49F4177E692
-:100F4000C93E69BC98F17666BFEB7CE3255C8F7087
-:100F50009EFDF19D367CE4A8989F1FF0791B94EFCD
-:100F60006BE61DE3604DAD462CC1249A31C935189E
-:100F7000CFF7DB249C5F29B4535A061D94167A35AB
-:100F80004925F85E267F970C7F8193790EF84EC134
-:100F90008E77DADF3728FA4B3146C784D8E76C2DD5
-:100FA000B0C7237D3B8FEB996BF26433FE3966DD6E
-:100FB000B725A08170E02BE2CF9375CB415EECAA00
-:100FC0003C0B9F29810E1E5FE6D82F5FA82CA1F352
-:100FD000FD95E19EE3BA968BF8F05CE56D7DBD333F
-:100FE000B700C1CFFD609297C7791BA06B567EC436
-:100FF000589E1A6BDCA4617B4FC7857CA8209EE3BA
-:1010000094FA50AE589A877CC5E8B05AF061103A0D
-:101010004527C7C8FFB1D91D4B201FF6AB88493CF7
-:1010200098282A71BF9AA158F940CE9B51D253DC1F
-:10103000164C637C62899BD92AE8A2AAA0FAAB115C
-:101040009E4D82FE4EFEB4C7C19A765D40E43C22BE
-:101050001EEF67A37F47EF8CA945018A7F098C6E3D
-:10106000B906DF6F55A14943BD1A30E35BC47D0F5C
-:10107000735FED7CF7C5E3888F7589FD7B46BCB84F
-:10108000588FE97E5C16BBD9B91E3F98973DCE09B3
-:10109000C6668F4B34EDB48FCBFFE6FEB3C1DBF1F8
-:1010A0002C01A11914D7A90ABFC584691AF9DB8FCD
-:1010B000EE94F87B1B0E7E3ABA2B7F387F6C47A3E9
-:1010C000F7CBF3C47769E7BE7D685FB584C0282895
-:1010D00024FDA72B0CFF2BA4915E89A50B76BFF3F3
-:1010E0009B27D18FBF57017CD7ED289B6307CE5339
-:1010F000350A906879B0C646E78F3BAFCC734C2E6B
-:101100007FD76AA6FC05A8DDF19D12DD1753E0EC40
-:101110003BF1BDABC6832E48B2F2E3C0FB3DBE89B6
-:10112000DB0D737EF1680D9304D820E0C1F5CBBAD6
-:10113000CEF499EC07DDC22761735D881B1DF8DED4
-:1011400073BDC04FDF68A1AD9E39BFB7664D3E4845
-:10115000FE9F187FFFB9DFF4525BFF20FC233AFBB0
-:10116000877C99E16790636EA075259A9F223B88E2
-:10117000EDA771FF91942208B7D39FB2708F44EB13
-:10118000D9D56C3DC3F7D8AE4E3AF6A38E782A1364
-:10119000FF4EBE9503C28E0C4020079E23A9D1743A
-:1011A0003E4B7277ED2F14B2C7AE7D484A523C7564
-:1011B000E799F9407857C82FF51A34DDC1569834AD
-:1011C0007F3BF0E709DBF1EED3ED78CFABB4E3374B
-:1011D00018B1E3D189E7FCB1836CF5E72B0D6E62A2
-:1011E0003E81EF4AF60FF1CDF424CD63219B474AAF
-:1011F000CFC4E7DCBDEB56A0BFA4573C3AF07796CE
-:10120000037F2760EF3E5E0A516FB125FE534D917B
-:101210005C39E5D0C45399D63181BE4582E4A70E2E
-:101220008B4EA47ADEAED4DBCE85AA3A427268C673
-:1012300029E775AFABAFC249965E77E981C3B320AA
-:10124000B7DCB5377B23F52E3C1F8748FD103C2FBC
-:10125000D728DD84F547F4B4DE1A349E0B221AA693
-:10126000B7887393A355FC5DA4F6D47BC568FFDDF6
-:10127000527DEC12B4FB1BAF8228EAFF6490AFBF33
-:10128000BB455A17E471D637456530D05FB0574932
-:101290004AE887D28C5F5C8076DB5E974EEB9F7668
-:1012A000EC37FF46E5A3343CC72891DB46E2B8ACF7
-:1012B0003EF9FB8FEE7D35F45D8B7DD4B5E7B661ED
-:1012C000B83E6D94616EB67D407D808FDF55F99795
-:1012D0006264CB05DE63B42F5FD969F7B3B9777366
-:1012E0003FDCC23D97923D7A60367F8FF3B123FC9D
-:1012F0005EEA2465C657BFC4F2E3FE53BC6304C66E
-:101300009499C53C9403E999F0313C333CAE17F114
-:101310009B8D7F95297E73DCF920A1BC8EFB23D0A9
-:101320003DD4D14DB369BD7A3234E920A6757B2511
-:10133000F21F351EE1EBDB980EBB9FE89C3AA61727
-:1013400058FF357BB97FABA6939F0F9CF3A2BDDE00
-:10135000B84E7BFEBC5EF8775940AC5B21283E9DC1
-:10136000F8DCBD2E6355809FA7D1BDB2889A7DFF62
-:10137000D519E47618C307CDFFE831882C63F3381C
-:101380005A5F3A01EF291D7D8F9F371CFD50999CB4
-:101390006D7FB539C0F965A39B9F1F6F9C1D482EBB
-:1013A00065F3D83F7BDE40DC57FDE3DF6303B59E8A
-:1013B000EC12A622645A138D7C188BF2D1C2EFBBBB
-:1013C000415B49B6F7934DB930E5C4948F92D9FE8D
-:1013D0005836BFE8A020DFFFD5CEAE94307EBBEB01
-:1013E0006989CE98BA9631B87AC0631C96F5477869
-:1013F0001AF7BC4B7E0AEFDEECFEEEA703219A7FC4
-:10140000D7B2F8D2F318BEBEC7843B8EF2E06E2B83
-:10141000CFD67F1CD693FF6A7B80F3739797EFC379
-:10142000416D2B991A44399978F10A06E75D4CFE13
-:1014300070FDDEE88A10DCF10540EFFF81B85F58EF
-:1014400076096CB9C9B25F3B18987008E97D28C06D
-:10145000E38FFAC42212C21DF9E8FD10F67FF403EF
-:101460000FD1AF54F88BCC764703E21C2E68FC8674
-:10147000F8656E1129C5482C14A91F0530620FC3E9
-:10148000B7457FA7E916A7710A634C0732780A03AC
-:10149000323F0F63FB34DC7F3482F913A7FD8A29C6
-:1014A0007F78E94DB5C4DD4B7BA55490E9CFD1DE03
-:1014B000400AFD328573657C8387D9A35EDE5F8732
-:1014C000DD6E450D8CFA177500509EEF8F4C7D6CCC
-:1014D000EAF19602AEFF5AD6A9A41F37A99D3EF4A1
-:1014E0004B971B7AADCAC62D54758AB7183097CB67
-:1014F0007BDEE07B0ABAEDA2F3001EF948C9EA1FC1
-:10150000393368E22BF60FC4D7F083C7F6A37915F9
-:10151000F1411FA4F72461F78C7B5BBC8B28EE198B
-:101520003476DF23B0EBA38D3E61C740DBEFF1DC07
-:10153000FE89BFAA747FA05BFFCC9E44EB2928558F
-:10154000CF207F9DF72BB13D10FA87EDF6082FE7EE
-:101550003C174B201C4E7D3316985E927AD73B4E3B
-:101560003A3323BC3B5FC69032EA2093334B7BA7D0
-:101570009EEA1714EBACD05327607CBF0BF5343FC9
-:10158000552F8E3CE3B1F08FA9A7D2FC9424BC3A2E
-:10159000C791C0DB9DD706A37E794E413FCAD109D2
-:1015A000FCEFFCA4841C15BC97BC18F961FDDE8B14
-:1015B0007CC8F7BB0E4EF4A2585D1BE6F7CED47D77
-:1015C000D3E220D8C77AAEEC02AF1EA8447CC88410
-:1015D00007456379CBF8C7DB2471EF52CF9F96E5BF
-:1015E0007D6C33BD36CCEF95ED3A38289FEF4753ED
-:1015F00044F76EBE17FE0B532E4C7E77F2B7290FC1
-:1016000009D64AB6D8118AD42EF68F763F4242D8F0
-:101610001109F3FD997809D9878B847D98080C5DB1
-:101620008D7FE6A02555ABE1B9C7A2E0208AAF5E69
-:10163000D497E3CF890F336DFC80D98B9638F84669
-:10164000F518F9C71A3F70DBBE9BF8CD851713BF9D
-:10165000E7227EA58F8FDF73829CCE4E3C7FD2F92E
-:10166000975D3B36EB7DBE7F95F99F07B1273BC960
-:101670001FCBEF9398FC66EA8F9AEB5A13797A5A4C
-:101680005F98F7414CBD63EA97731ADA9EC9CBA203
-:101690003F9C7A23E2D2BEBB86E12FF2B300BD7736
-:1016A000E2D423EFE12F25E477BB3BC8E07DE4D90A
-:1016B0003765F49B3CF6533677561ED957C7FD82E3
-:1016C0001DA776DE65DAADA6BDEAAC67DAABE6BA91
-:1016D000639E37FD3A187B00C797F630790A617C24
-:1016E0002CDF271F0CC41EC2EF790C663FC60256C2
-:1016F000A6CAF97ED62EAFB9E433CF217FED299566
-:10170000D6BF385BFF8648997098E3D707C5BB0200
-:101710008CEBD0AE29AB013ED842FE6E40D970882A
-:10172000E1FA8CD74B719EBF1276D97362BD31D36B
-:101730008381E80184DFA542DC53FDF1E136FD8BB6
-:10174000BF0E1AFBB13FEF6483E6D15F8308DAFB7B
-:10175000FDD57629C2E0286CD0A56E678FB9AEB3EF
-:10176000FEFA4FD1E9DD8FFE78A700EBA37D9485CB
-:101770003E7F0EF2B8A605DECE67D1846F9CD234D0
-:1017800039D4C3F97AFA3D8488F073D9E3408E3EA8
-:10179000F5C2003CFF7CE507EF06F15CEBBFD463CC
-:1017A0004184F3F525BF0FE27D885796F0FDC7957C
-:1017B0000E3BE784C0DFB450F44890A5DF69FEA873
-:1017C000C6F60EC9627E3E737552C14D6937BFCFF2
-:1017D000DF9147BE3D33BFA0BD8F2D6FF2E9020FF1
-:1017E0008FDB72CEBF2AC4E368AEDEB9C5DD5FC74A
-:1017F000F163FF8DE3BF2EECB8D77707C9FF61C255
-:10180000336BE74837E2E1BFF67AC4B97F878BE3F1
-:10181000DF9882E77331410A279CCF3E9D47FD5DEB
-:1018200075BB4276C74C36D662C6DFB1BD57D33ED4
-:10183000DC398FAB5ED127F563F4BB6A9544F62A99
-:10184000D65FC2F821B678259DE339E73933EE88B3
-:101850001F11768533CE64CE5E7EFE5E0FFAEAF10E
-:10186000E559E24EF65E4CE76E737AD9F7948784B9
-:101870003D5103E760DCFC09A85A5BA5F7BEEF7990
-:10188000BD192888ECCD662FA5479A359E0AFD39EB
-:101890007FCFBE6789CFD48E1A94FB5D075FCDFBE7
-:1018A000969ED6E35FDEF2EE3377B3FC28E07E1E31
-:1018B000D3DF3E43E0FD02A1CFE7087B61D4073DC3
-:1018C000EBF319888FE199F09A7A7C06FEBD410B03
-:1018D0001E4CBDEEC4C7F18383F3903FEA42CEF3C2
-:1018E000E64F86975CED1628D9E3194D393A12E494
-:1018F0007C5DBFEDD215A56CFCC453AF9DD1C9F57D
-:10190000C421D413269F0234B9518E9DFC68F2493C
-:1019100037DFEDBD99F064F20793ABB038E70CE325
-:10192000FED0C97FBDC53775B93ACF40BDE0E4B33D
-:101930002EC7BD6833BD2CC4FDEFF5BA3109F7AB36
-:101940006CB959C1CF03B93E7A5D6D7BF64694D729
-:101950006D5C5E163CFED04F500FCDFBF1ED21D4F7
-:10196000436FA86DC5385EC3F6E5213C577F5D8D9A
-:1019700087B0FD1B49256BFCE3CE9064BEA7618B4D
-:101980009380D6F82528C7FFD8EED2F01CAC71871B
-:10199000879FBBEFE67863797EDEBE3B7B9CC4BC51
-:1019A0001FDD5EACF3B85B7BBCC43617F92FD0BF2C
-:1019B00086C3E43A2FEE3E7F6EEFF93CBD71B788E7
-:1019C000B3D97D71D67809332EC1C9C79B1CFCCB16
-:1019D000F0437EBF38838BDCEDE29C3C71FF9DC3FE
-:1019E0000F33F88E6CFB5548AAB2FAE3F979FCF193
-:1019F000F6EFFED02BE7E6DF2EC1EF697B229935AB
-:101A00007EA2C1950AE1BEAA618B8BF6810D0F29DA
-:101A1000F45E1DFCD143EBF9FC877EF68773197CDD
-:101A2000F31F71154DE1D3A03809935EDD712C824F
-:101A30003EF31EFD193F5FD6453C8BA0D3FC47F615
-:101A4000B9312EC789CF89EDFBDC9D8E3808A257AE
-:101A5000FBE149749FF0FEF7DDB8CEBEF1B404FDA2
-:101A6000CA33DBCFDDF2B310EA0BC413C50108BAE9
-:101A7000E58E5B4A5DF2D3D1548FFC76BDD17109FE
-:101A8000CAE218E2F7877FCAE098FB9287E2A7E6EE
-:101A90003E7C1DC519BDA63671BEBF677931AEBF8C
-:101AA000735DF1628D52FE7DEEE6EB891FE73C7FB0
-:101AB0007DB1B88F54C2FD3DF1129CE7559BBE49E4
-:101AC000F39C0D31E2C7B9F72851F4B39C5061F291
-:101AD0002359E466683E979BD7B67AF0311D784D5E
-:101AE000F839E3BF53C4DF8B749E57F177634E8898
-:101AF000FDF73F43DDE78D5EEB7EAC71DBCA0EA4E4
-:101B0000D39B038C7E1AC513A87181377A7F5D79C8
-:101B1000FEC27E42BFD17B37A61D3411BF63FD0ECE
-:101B200017BD7B6369677BB76691189FC1ED9746C8
-:101B3000B0B438BB1FF49BF9921907CFE36F4C3E4A
-:101B4000CBA507B6F17896F70E713D83713954DE57
-:101B5000E14AF5B3C5E3786CEFA2A4E34C5C42CE56
-:101B6000EDE50C4E8A97E9C6EFD312FD3D08935F71
-:101B700066AFF7D8E3F3BAF9C7F96E8F3D7E668E8C
-:101B8000C32E33D38CF53FDF715EB7E9D4E2671A19
-:101B90005C498A7F6AF8A387F6270D0FB9A2889758
-:101BA000B7763EF3876F31BE7FABDD9463BBDE75E6
-:101BB000CAF1DC5D63209B1CBF158840563966DF87
-:101BC000B3CA71207DAEA1C367AF77E7E4D0BB5F36
-:101BD00075E093D90DF91847FCE603F30792BFC2ED
-:101BE000815F53DF3AF5E8AB219DF09C19EFC7D731
-:101BF000FD743C26C7A3C99FF31E5C40E374F3B198
-:101C0000C9A7261FE7881B73E2D3599E8FBEB33145
-:101C1000997E91782D54E2DF694AB881BFF726FB9F
-:101C200023C8BFBD9D77FE36BFDC7CFF6D04DF1788
-:101C3000F2F3CE4840C3BF5881F7E5946CE7EC91CE
-:101C4000897256FBFF07F9DC4E42B72CA68FE7736B
-:101C5000FCB52851E1C86BA77B0C74B68A7016845A
-:101C600048CE5C224E85F54CF7D12379F2BB3AEB96
-:101C7000E3AEB5072E52D13F3B4ABE6E30CBEF5A92
-:101C8000FBE2452AA377E43CF9D1412CBF7BED1F51
-:101C900079F90879948BB1EA8EF84B17D5B1FC42EB
-:101CA00031EF85A69FA4658CCD4FA2CA87EFC0F304
-:101CB0001CF5A7FCEF11AD6672EFAD4E9F33E779CF
-:101CC00020EE63F93C374B597E45F9EF57E026F299
-:101CD00057FED8867CC257AD8E783EA279297E67A2
-:101CE000D11317521CE9E3F9DC1F7DF6A3E7D1DF1E
-:101CF00075FC0CE1B83FBF6F6E385A5CBC9F23BBCC
-:101D0000CE9E88783E7B20FAD4D2F4A85675FAEE9F
-:101D100063688F73BB3F8CF75B12056EEAE771C196
-:101D200067A79A9A712F4A1EE70B255F6E7A84A5E2
-:101D30004F0B7EF88F7CCD5C8768DF7DF4A97E5BDE
-:101D4000F9BB31C7CE407A2BCAF13FA3BD79ECDB9A
-:101D500079F4F7475EF273BCBDE4E778BB3C7F8D56
-:101D6000EB2CF6BDDA7BC675C8F42F493BAFC774C0
-:101D70008B16FB25A707A4B0DF6F5DA9F07E034D8E
-:101D8000417C374E32B81D2E31669AC1F0913040F9
-:101D9000770F4611B6C77F284AF5B1148D1FB48D51
-:101DA0000F656CDD64727EF9384E2F865B5A475F93
-:101DB00018CBF3267CD39383129D3AC1F327846713
-:101DC000A4273900F753DF626615E77BFBBEBECB65
-:101DD000CFCF37BBB0FDF074FC40E3DF64DACF3621
-:101DE000E21C58FED12320FE5E217F5FC7F47B8C6E
-:101DF000FBF5B5E4FF1EBD673E8F3311FE2EF33CAD
-:101E0000BFE6003F9F73FAB7CE8335A44FC739F4BE
-:101E1000E8797BBE4AFAB5B7F3B97F987AB5144A28
-:101E20004FF37CEEA3FC53389FFB1F7622B26E006B
-:101E3000800000001F8B080000000000000BB55A56
-:101E4000097454559AFE5FBDDA92AA54AA2A45082D
-:101E500004E34B0224210B45122004D42220D0316C
-:101E60004A801681F64881B298AD98B4DB699D43EB
-:101E70008520D2DAA319756CCE69BAE785D611250B
-:101E8000E92924D1E05432C52204254E9045A01DF5
-:101E90003BED7423DA64313D824BF761FEFFDEFBDC
-:101EA000A82541E93E67C8E1DCBAEFDD77DF7FBFF7
-:101EB000FFFBB77BDFBA4409600CD03F1D2403D47D
-:101EC0009BF19702307C3C2311F200F47A00D9098F
-:101ED00060546428C1F62AFDBB0DA06D338E338596
-:101EE000FB6F252A6C9EFC53F6FBC1462DAC868207
-:101EF0008879ED7CDEDB652B4031CE7F1154533A7F
-:101F0000C0B4BEEC9FCFC1BEA1DB002ABD979EA08E
-:101F1000FB6775AA1F459B71ECD74521BCB435CE34
-:101F2000560053F195293A50CC6C5EB88AFFE39481
-:101F30007850B2C37D4BB633AA2FC7DB764122FE61
-:101F4000F07B7A53508E227E0B12DCE3A3E679DB22
-:101F5000B6A89BE42EB2AFAF20B9134B32A2E681F4
-:101F6000E3FA4FFAB09F8D7F573300A643656208AE
-:101F7000E52F844A8F84F2BA3F027708E59F718A81
-:101F80008FD39E7387FCB217712CF928FA7A2944F3
-:101F9000F4719EC73EFAC27138429EE9F604D70535
-:101FA0000BFE180FE3AFCAA3E2E80E114EA7643789
-:101FB000AA01EA8FE12017B69F810A88DB342848FE
-:101FC0000486AB0C2AF6DF04EF0B73B0BDB279C800
-:101FD000717852184F87271ACFA445D1788EA98CD3
-:101FE000C673EC8A68DCC679A3714ADD3825EAFE3F
-:101FF0004D9B0AA3FA373F561A353EDD5F16D5CF03
-:10200000DC5E1E357E52D3D2A87ED68E5551E37348
-:10201000D4B551F7737757DD90FEF303F551E362C2
-:10202000F53FB5E32751F396CAF7CA9011E6811F31
-:10203000FF880785A462D23FEA210423F53FD3E558
-:1020400027C6FFCDFA7F98F49F1BA17FF9DE44AF2E
-:10205000356C6FB1ADA6D79FD05AC7905E714E1444
-:10206000EE0AE919AF0D1AACDB256C1DC89D7BF19A
-:10207000FA63667EFD5181CF95B83495D6EF081E80
-:10208000FD5AC216D5C2ECD0FFB1456D44DE3C2AE4
-:102090002B0DC4AB17E54A09509E54549D2E13795D
-:1020A000A4838D01E4F7B33ADDEACA08F99EB3735D
-:1020B000BFF29C5DC7DA5F18D156F1BDA916F09B3F
-:1020C0000BD973B436FAE7015CB72D8981822F2CC6
-:1020D000DF3E7F0EDE77F4652B0E0033F56F01389F
-:1020E0001FCFE53D1FCFE55C65521AFBC87FC8EAEC
-:1020F0002492A7D9EEDD69C7F79C979E30E09BC17B
-:10210000E0F21BC8EE52CDE0B7E1FB1A0DB0BA12F7
-:10211000FB0E7049F5D826C24E3BE18B62285791E1
-:102120001487AA7213FBF0FAFB24D138B231B70E30
-:102130006600ACD4FCE1C61CE60F87718DBDA450CF
-:10214000BD9208D80E3F90C9AE9FBB0FAD10EDE910
-:102150009C91E3A1E17051F8C9CF379B597B69B3DA
-:102160003DCA6F6E6C7E2141C179CE65C3A2400429
-:102170007E5D84DF746A6586DF80FAC7648267707B
-:10218000DDB79349689FD4BBCD8A439EDAF10F95A2
-:10219000807A30B62DF1A34E60A55161E3B5797C0C
-:1021A000C1B940381063E9FA3D1FC22692EF9E6F15
-:1021B000B18D785F8FDDC0DED743EFC376393676D9
-:1021C000C46D39EAC541EDD1390BC82EF07A48C249
-:1021D000FEE26E30903D2CF1A61B489E93E03EDD62
-:1021E0008EF29CB52BECF91F42A581E43A735F6D2A
-:1021F000028DBB369F360F0AEBC078F2A1C36F4841
-:1022000046BF35748BE4DEA5B0F799E97AE5BDA940
-:102210004F5A95F0FBCE80B7FF34EA7B29B8D9BC82
-:10222000DAFC6879517EF18D8DD5BF4BCA207FA82D
-:102230000333F9C34E13F3878355575A5FC2FBAB81
-:1022400053FB6E32E273E7ABBE9D4CB8ACDC21832E
-:1022500082FAFF24C1FB07FBF4301EE71EF873026D
-:10226000DD5F65525F7909ED00F698DCAF003DB7A0
-:10227000873DA78D1BB0CFFD8C78072508D4ACEB2C
-:10228000DBA786FFBCD773C612CF347E3D28F85536
-:10229000FF5AD658E2537DC2357EF1FE2B996389F1
-:1022A0005F3324CECBD879BB905F4A16AE1B79A59D
-:1022B00020AFBABE2A4B223FB1EFB8B388E4D48333
-:1022C000F76AE4BAF6BDBF2A97EEC359D70DC94BDA
-:1022D000B6E94739EF012E678FB08F15C1A422D21E
-:1022E0003BDA9DC581E356FDC76BFDBF257C3AF700
-:1022F000BCF2388D29BE313C34FFB4379EC7231061
-:1023000071CE2D70C13897AD47510721DE4DF9C20E
-:10231000F5FCD65EF20BC8AB2B3A747C99E4AF2A7D
-:1023200081FC8205DC0AB5E865DE9B8D7A6C3CA0F9
-:1023300083A7B16B23A7A6F99F12ECCB3AEE7FB02F
-:102340006F4EC13822FCD324C7BF2EDACAECC76354
-:102350005D3383B9442657F1E1AA0A7A2FF4A21F0C
-:1023600047592BF18FE2C16CD874280EE59CB1035C
-:10237000F3031C37F32CBFAFF9F55921DD1A6322A3
-:102380008DFBD917B28D208A8E03B30F977F4AF346
-:10239000CE8688E746890FB31C7F5F7C98EFE0FE0E
-:1023A0002190CDFD7B2014AFFAD3D9B44595F9C85F
-:1023B00017278F1F2D8839D9B1511AC836A31F5E30
-:1023C000E468DEBE7D02D26122C785FA8DF45B2906
-:1023D000623CBE96371E9EC2FC21FC05A522BCECC9
-:1023E00042E618798AD1EE78307647E59DA123DF61
-:1023F000D8FA701DAD4EE5BF485F4398D7905F880F
-:10240000D3F7191DA3ACEF4DF2AFC8FFE71C3A2676
-:10241000AFB943F2A8F87EB3E20109D71067B74F0E
-:1024200093A5F0F832078F4BB547CEA719515FFD42
-:10243000BAE3B63C9CBFA6FD0D1B2E1F7E6CF3AE0F
-:1024400073E03CD5E73E9841A10B199E5699403860
-:102450006524923DE5EBC1AF2F1C29876F072E063F
-:10246000295FB72389B5391D125B9F2FC4D739D097
-:10247000D1E88CF41BD79EFBCFCEF1A4B73D6360AF
-:1024800005F9E3FC60D106E231C962405DBCFE554E
-:102490002E9BEF09473ACFAFF5A0A7EB00AA6E2914
-:1024A0000EDA63C0E770DE81AF64364E9B37BF63E0
-:1024B000AE6C471EE5859A0E525E18173429A4E7C4
-:1024C000B89781E3128C637ED1D7B510287F1D7435
-:1024D000805BC2FBADF1431F132F863A4DCA2E8994
-:1024E000F06B0227CEDF6AE4F133070DE10D6BF8E4
-:1024F000BAF6BEB8E0CF81FC15F2C3A3D27D7D133E
-:10250000DC628DC43D81C9FF4B07E7576B7C486790
-:1025100025BF8F9CDCC5E40ACB09ECBD9A9C39AC85
-:102520000E68350E5D78DCC5E4B2131F7280CB09EE
-:10253000C12CE5157ADEEE61EB88B32B6EBF345209
-:102540002E5F01E6C56877CF6E816B764E76EF8B96
-:102550000FF7CD6813AD1920FCC229968784FBE8DC
-:10256000B04AC2CFBFF1CF67B66F9DC3EA23BF8C1D
-:102570007CB0609BE0A47572FBC2B2C933A690E345
-:10258000E0469C2C667EFFDA78E4BB95FA563ECE98
-:102590009D68B7944BCC6E80ECA64EF89987A4D07A
-:1025A00085DB50B55F860E1628284BCDD1B7196F45
-:1025B000AB75C197F2F17E59BC3748FEF7AD8F7409
-:1025C00060C3F57FFE5A9C5A817864EF6F4EF658CF
-:1025D00047CEF7D4D92DCFA792BEF74B0A228D79DB
-:1025E000E1501AC95717FCD4E8C17661C7EF8D14C2
-:1025F0009F5639BD47C80E4A3A1AE6117EB3A0A9C4
-:10260000D16E657ED14B3C0DA470FF317C6AF2AE79
-:102610008608BC2F3978DE0243DE9BC96E82C23E3B
-:10262000BB28FFC1B65DE461ED0756662AF9E1E714
-:10263000FC70301570CE2D70389570D6AE0FAAFA9A
-:1026400045C4A7DC33E6D59E08BE5D10F67E41BCCE
-:10265000EF1F9DDE8F0887EA039F186DB82EDF1FDE
-:102660000269149F0298A7D9BFC32FFA62ECC6A7CC
-:102670001F32D278DF45607E04F5BA3511F5B4E734
-:102680004CC7943556263F24E2BADBCF9998DF6CCD
-:102690004FE7F6D770FA7201F9ADCB9DD537135ECF
-:1026A000EF3B0C1ACFCBE2C99EF602F3639A3DE6EC
-:1026B000913DA2E879C4F362EAE7B0F95A8DBDE52D
-:1026C000CCFEDA7540F6873C67BC479EDB29FFC825
-:1026D000B323EFD9F359CC9E5B7B31E061DF8F7E72
-:1026E0007C12EB972DA37E6BEF7C3BB3671D425BA7
-:1026F0004876193AC8E609604C23D549501999A77C
-:1027000096396C4C5ECD3F563AB8FF0F642B896EFC
-:102710005C8F4596A3EC20225EF2BE88A72B9F37E4
-:10272000FCF4C509644D222E88BCAC4BE4C1E02DFD
-:1027300062FEFEC72296D5BF53BAB805D75BDF232A
-:1027400073FF2F787250E4C98737A7B03EC50B05D9
-:10275000F5341D5B0FFAD3199E4DF3D0C6A064511A
-:10276000D3216A4B2B03F3107198B3A2F790819B8E
-:10277000732EF1AFEDE00F72F5C4F77326884311A5
-:10278000DBBE19FAF875C4E1912EC47F94B884CBEE
-:1027900061FC4304181FAFC79B41A9EFAED96E4C33
-:1027A000F99F1FFB037D1CDA0F1103F1C87B7ECC60
-:1027B0004FFD2850BBD333D58938FE36C93BD58968
-:1027C000380E9EF826997C7AFBA94F6CE4EFDB8CDF
-:1027D0009E5CE2595B06D60BA3F0738293F3A7D8F5
-:1027E000149DA76BED5227E7FF643F3C43FCA96BA8
-:1027F00093ED2AEABBBF4DF618318FBAE0F126EB14
-:1028000011D28BE05F3E9BE2BBA87FD771D8611DE0
-:10281000E52F1867D6BF6888AA4B6BC4BE4616F46E
-:102820006D4B459C7C2F4BACAEDD18938FD450FE86
-:102830005240F545B391D653F572CC3C94C714D0B1
-:10284000B8EFAE73973AC53E472664521E833C628A
-:10285000F5F4D069D9BD8B62A01EBA4DC8DF3D3AF0
-:102860008E13FA4D668F5A3E637279E691DDCFD3AF
-:10287000E28AA85B875A2595D9CF6EF4F3D82FBD8D
-:10288000A83403C7E154CA0C5A0FE765A99E8F2FDD
-:102890000DA633FB2BF1603D8FEB5E8FF5BC4AEB51
-:1028A000D6F23CD5C0D68FE197E579B3406DB4E15F
-:1028B000B80DBB25B6EF53BDDB1095E7F9043E35E7
-:1028C0003B4E1CA172B23610735FE0E38BC1E70D83
-:1028D000FA316B244E8F3A45BE97066991F91E7402
-:1028E0003B47AD0B347CB43CFB4F069E5F7C20E63F
-:1028F000D7C6FD8B93D7E7751E60FB4735AAACAAF8
-:102900003C1FB4AE41BEDC2FF872BFE08B0FF8B8AD
-:10291000DADD921AA278F533AE7733FE112EEB0290
-:102920006B16A42A23795525F0D8D86260F92FC0F8
-:102930002623D9E7C69D31E3042E5531B8D479A5B5
-:1029400018F9783EFEB7CA576DE0FB35D5C82FBFE2
-:10295000F2FF276FACFEFE5DD3DF149812A5BF45D2
-:102960004937A4BFD83C79EF9129167A7EB83B83CA
-:10297000ED4368BC899D6781C8B317EEE0F9687FB5
-:10298000C73C4B3ED553C7F56E09E729EAF95F5BB3
-:102990003EE251D82943054E31182C7AC68FEBDC24
-:1029A000D73D719982F1A1B047CFE24B514FA14A77
-:1029B000754D614FA1253381194F12D50B380F8BFF
-:1029C000CF83C7279ECC233FDB3DBF98606F385E27
-:1029D00068A13C621FF07D0DA9A738A92F22DE74E3
-:1029E0003BF9BEC6B694FF7996F2FC857B0D6ECAA4
-:1029F00047161A86DE9FEDA2F7EBDD0DD8AFE95939
-:102A0000BB258EF4FE9AE4A674FC486FBDEB47A488
-:102A1000DFA0C16E62F23E7C90EEFB5B24F7241CCB
-:102A2000EFEBBC3DB715FB85CD456E82597B5FA1B1
-:102A30004379A182F2C5711656C72FBCC9C0E2EE18
-:102A4000A5F1965F53BE54E5695E40FEF8D2DBFB0C
-:102A50008CE40F065B2548C1851C4939F41B3FAE49
-:102A6000F3D29B278C9494CF6B3B61ECFB8E7CA2C2
-:102A70005F9521C4EAF72623D541B5CD5ABFCF488B
-:102A80007AAA14F955DDCBBF67FD2AAA13F07D554C
-:102A90003B6555C19F873ADF3212DE752D128C4D92
-:102AA0008FB8FFB2C4EE6BBC5F0B9C076B857FAA2F
-:102AB00016FB90D5B40F89D7613BF7371AEF1FD8B3
-:102AC000BDE40885EF754DD17EE841C1F30D549703
-:102AD000B2FADB6B24BD6ED811334EF0FCC1EFE1CE
-:102AE000B93549F8F31CC8219E5F9ECBE3C9E513B5
-:102AF000F1963C5CD7E563B21BE03BF9CEE2EF71A7
-:102B0000912F0C87742C9E69E3063AFECCE28DEF80
-:102B1000F8B091F2DB05C12F983E2A8207E613DE5A
-:102B20007782B786F0BB3368B193FD57F4717F505D
-:102B30001E34A9B40F7E2704B6929E07BB5EDDEA61
-:102B400024DEFC1BE70D087FB741E0BA41E0BA0183
-:102B50001D7E12BAD8AABC032F61BA0FE5C0FD5082
-:102B60007940F8A19DD13863E4B98FF4551734C189
-:102B7000D378FF0EE18FEE68E1FE28364ED6897DD0
-:102B800080C171B98BD97E2BD6BB94C7D5B444E331
-:102B90005F27F605EA62E2F0CD497CDFEEFBEAFF53
-:102BA000583DCD8DD153C510E74F39C53D5C7F777A
-:102BB000684B1EEDDB6978C5EAA95BC94C1CAD9E6C
-:102BC000D5DAF745DEAFF517237129DF0CD89BACBA
-:102BD0009175FCAB493CFE54CD92FDA4E76BF5CE5C
-:102BE000C443058A2E5CEF609DB332690CAF7BA6AF
-:102BF000E1D44727C8E07285EB9DA7525EA828A4C0
-:102C00007CA585FB9181129C2F91F27960FECBD738
-:102C10006252A94EF1217F589D43BCC1B63228DDD6
-:102C20004EBCC1FA611DCDBF84B68E1187251D3CF7
-:102C3000EF5932FF0BC6B76313F97A87F5CAD8D1BB
-:102C4000EA09AD8EA8FB8AE7A9DAF53AB47B1A5FE8
-:102C50001794585DDC76F0EBB474F49F839D57D2E3
-:102C6000D660FBA258BF96A70E619E9A21F214CAA5
-:102C70009FD77395C1064C871F431EAE17710EA4D4
-:102C8000ADCC4EEA28D925BEB54B7C1F673F5E9878
-:102C900089FEF7837896C70C9CE1E743F4FC139810
-:102CA000470DAC0D1C76E2F8CBAD128B7FEB31C734
-:102CB000BDB570A4BDD70A5E36C01651976D656D5F
-:102CC00079F6DE4F1E277FD46256C8BF0E74341AC1
-:102CD000D9FEB21AF17CC6C87CA856F0B7F67BF6CE
-:102CE000B55E4D127152F012D7C1F2DBC163B2DD95
-:102CF0002431FC7E353E122791FFB41D8C637A1E71
-:102D00003C615529CFFF5CF0EF92D8776F2891197D
-:102D10002EBA59BCCDED7A2B83F44A7AF0D23E4AD2
-:102D2000D75B533C6C9F4F65F654BD5BA6C3BEB0EA
-:102D3000FC010BDB0BD5FA1ABE3E812FCA35D9E850
-:102D40000ACBD5AEEFB3B947B11B493AC8F4A69345
-:102D5000A2EB5CDF7EB9528DB0275CCF6AF26FFBCD
-:102D6000053F403F944C7EB9334961F23504B99E2A
-:102D7000759DBCC5F72FE7FB3606F6FE11F7CBFCB9
-:102D80003574FF72BA05184FBEF25750FF910C9977
-:102D9000F9A9473EA8CA8288F783C4EB719F6128CE
-:102DA00099D5C327744C3EDF89E1E48956F283CD7F
-:102DB000F3ED79E4DFB87F389261D948FCF6D37B34
-:102DC000C786E75998C4E33CD07A53289B7991CFC2
-:102DD0002BD6BB0596321CB6089E75897C14EBA6D3
-:102DE00033648FB175D3F5F2DD88FA8D3D7F79AE0E
-:102DF00072F247C883C2637A3FD5EBFBCE723FD1F4
-:102E0000D0B9E1775407FBCE9B80FCC4235D1BB295
-:102E1000280E83D73B95F2BBCB5D0F4E65FB97D257
-:102E20001626979FE44BA1BCE97432E543B59DA7F4
-:102E300093595C6F9FFE02E5499817DD41D7315FDA
-:102E400061FC2BEC2966FCDB77BC3829930407B7BF
-:102E500085E6AD3DA6AF247C6A8F15BF5741F94B7F
-:102E60004F19CB93B4BCA888EA71CA938E4D8CCA13
-:102E700093FA057E8307E2D8FE8704199C3F303120
-:102E80008A3F356DEFB07CA2A643F644F2E8DA73D0
-:102E90002E3DE38DC1A5B0F91A029287F1632F6F21
-:102EA0006B3AF6B1F5551B024CDF0D2D067EBF9532
-:102EB000B7004DEC793F38FD84C77B7409F5506E3F
-:102EC0005427D0FEFABBE9BCBE88D5C77617DF4FC2
-:102ED00078F79CF766E2CBBB73BD59F651E2861FCB
-:102EE000CA78DD2D09BCDB0C2CAF8C1DB7CDC5F726
-:102EF0007B6C491075DEA8B5F52ECE9F7223DFA737
-:102F00008ABD7FAB8BD7CDF8EF191DF2E26485C186
-:102F1000FEB4A827C6A1BFBD4BF8DB65771A58DE03
-:102F200071529C33DDA5F9DD121EBFB5FDFE253BB8
-:102F3000E1492CFFE14BC863E7604B3CD17EEF6E6B
-:102F4000915F2D5B14735DE453777F4F3E35C3254E
-:102F5000FCE16498CCEB06AB85F645BFEC36D86552
-:102F600026B73AB1327FE43A357F73449C0F75A39C
-:102F70001FA4B621E743B64FF5EE8173BF71303F12
-:102F80001A07197CDF91EDD7D75E67BFBEE19A9D26
-:102F9000FE308A779A9EFA29CFCF1BA9A7A502EF08
-:102FA0005AF325233BB7844DDB7572F89CD264F04D
-:102FB0007A52711D868EB9213ABF6CC831B17CA995
-:102FC000FF7649257F8F72A69922FC7DFF389E7F70
-:102FD0003DB25C62FBC207723E6471BC36D46B24A6
-:102FE0005E4D6E5BF324B35F3F9CA27A49D3E762E8
-:102FF000338F9FD7F4A8AD976E2AB43EA79FFB6589
-:10300000176B693CC5CBBB447C5C5C12ADBF2CE844
-:103010005D40FB23F77824962F5D4FEF4B574C7B99
-:1030200087DCDF8DEAFF9F5CDE875D64EFBDC3CB8D
-:10303000697FF7DD9C4FD328BED65D87CF7E81AFF9
-:10304000CFC2CFC57C167E1EE6CE521AFB101FBD26
-:10305000C3BBD945FB4FBABFD8A600CDD3F7AB7AD7
-:1030600089F4030CFFEBD9D13631EF36979DDB8B1A
-:103070008B9F0FC5519FECD9A04E203F0179377629
-:10308000CED7B0FF6801E969E0C0B10263843E2F8A
-:10309000D5A33FA0F8D2792859B146F24D27F8A61A
-:1030A00067AD242D1571339A7F97887FA4FFBD8764
-:1030B000EEA2BAB0BF6D994B5222E26AFB49DBA483
-:1030C0008879FB83321B8FF5D8E4BB1322E57C9211
-:1030D000C9D91FE0F301F44D5E961F79BF919F1B84
-:1030E00099FB188F9FCADEC4CEDD351EEB81F3B885
-:1030F000AE6309B03825D61D30E20FAA33BA4C2A88
-:103100009D53D07EBB23C24E8E0A9C67627140FCE9
-:103110009C057E99E69D8933DE4B7D3D84E84C6EAF
-:103120003684647EDE3D0188D73304AF67EA430707
-:10313000A402368E9D4B95422F1B772B0CB1D603E4
-:10314000763DB565E0666D89397407B993BC4080FA
-:103150007D97144AD63B2E98D951298CA6BFF0FAF8
-:10316000F57041E3290EC6A487EDE3C78E1B1676E2
-:10317000EFA6DA82F4DC0F6C1FEE16E893E925B3B4
-:10318000F5B088BE27BB450FE6789477EF611DB395
-:10319000E7AE3E45257FE64E12CF7D86CF617FA606
-:1031A00087DB2D8520FA6E455B6F2C0EA5381FED51
-:1031B0000BCED463E5CB700CB1F7DD4682E3BAE702
-:1031C00082A2A7FE1F5DE9623F85D769F3449DA6F1
-:1031D00033FB191E7F12F191CE736C384F69930443
-:1031E00067E97C2693AF579BBF14B3C1C4421ACF83
-:1031F000E31B6D859F75F2731E1B3B9F9B6F27BC66
-:10320000A450B2EEAAE5C6711D4C0626B7EDFEA18C
-:1032100081C78BC3E75DEEE0D1B3F45D8EE4F1B01E
-:10322000EF7ADC666B88F27364C7A5C8BCFBAA6B37
-:10323000ED5FC9DE25C5CEF0022F28947F8C0D7F6F
-:10324000EF025793C2DFD3108C1793C3E7FBDAF773
-:1032500035BBD5A58A0EF5B2C26576935E0ACD69F7
-:1032600045540F36DBBD7F75B1EF6C5A26B1C9F4FA
-:10327000EAF4CA8430DF2DE02921BCB5737D49E82A
-:10328000EF7AE7F664ABC4730BBA7DFA2EE819B493
-:1032900017B373B4EF8FF8793E5AA142DF1DC11303
-:1032A000F314FA2E609BC3EC7E5AA2141FD7670951
-:1032B000AFAFD1CCBF276834F3EF0260EB74B67FB9
-:1032C000F690388F68B4EAB2A9DE6A84783795F44C
-:1032D0009ABC0F25703E3EF4DF16763E1A2BF7D7C8
-:1032E000F1DE9C31D3C3F23F2ABBCF62EE1385E7F8
-:1032F0001C0D4F5D18CF156A46639FC2F09B46CFE9
-:103300004F33A937D1BEC82A13FF7E49C30D15CA52
-:10331000486D17FAD0F0B393BE691D1ED4B7C69797
-:103320008C307ECFC473DC0CF4E544267B56217FC1
-:103330001D8BCBFF01AF6B7F8EF0290000000000DA
-:1033400000000000000000001F8B080000000000CB
-:10335000000BFBCACFC0F0A31E8143D1F8E8389D13
-:103360000F534C941182D7B3E0D78B0D5B3122D829
-:10337000FEDC0C0CCA9C0C0C2A40DC07C4FD40FC93
-:103380001E880DB818180C81380DC84E07627B20B6
-:1033900076E386E869666760E806E2C9403C9B9D83
-:1033A00074FB39241918A6C822F84F806C4505D241
-:1033B000CD19C54313F31BA1F235B451F9C1BAC0FD
-:1033C000F481A446539B34F34F01F59E36C22DAFD2
-:1033D0006E8ECA97B344E52F3343E55F7487D00000
-:1033E00093DDE134B803000000000000000000009D
-:1033F0001F8B080000000000000BC57D0D7C54C52C
-:10340000B5F8DCBB77EF7E6F361F840D24E1260410
-:103410001230C125060C56DA4D0405451A502BA86A
-:103420004F970009C857502A69C57F2E49080102E5
-:103430002C186B50C4E553ACD006053F5EAD5D1053
-:103440002DFA7C362A2AEDB318104129D014A56C28
-:10345000DFD3F29F73666EF6DECD6EC0E7FBBF7FF3
-:10346000FAABC3DC993B77E67CCF39676665D14C14
-:10347000D206107209FE7E44C81813216444B42495
-:1034800015AA404612F2532BC13FAD5F6CD9584785
-:1034900048D842486426211D4EDA51AAB192425AB8
-:1034A000DE7EB348D2094982F715429A849A4303D3
-:1034B0004B0851B344B29D3E5A9E393929E04C3CE9
-:1034C000EE2E3EEEAFEAAC58B6D779B07CBECE8BCE
-:1034D000E5DE3A8584F30979B1AE00CB97EB7CF851
-:1034E000FC5FEB4AB17CB5CE8FE56B75E3B00CD7D2
-:1034F000556079A06E0A9607EB02F8DE9B75B3B0B3
-:103500003C545783CFDFAEABC5F29D3A159FBF5BEE
-:10351000D78C65475D10CBF7EBDAB03C5C17C27E09
-:103520001FD5EDC4F2485D3B3EFF53DDCB587E52C4
-:1035300017C6F24E924C481F42EEB8E382751A5DF0
-:103540006FFE538BDE1F9F46C8DA11A20FC095FF96
-:10355000D4096FA030BAEEB5DF9AA6B4C781CB4FBD
-:103560008880E3AC75116C5FBBFF8F44292264CD6A
-:10357000884EAF4AEBE3F977866C3F6C9D5618EDA9
-:10358000173BCEE7C4C4C631D376DA6FF006D65FF8
-:103590006B1F0FDF19116DDFD1F6BE75BA53DFCE89
-:1035A000DE7F66E3FB56C0DFEA8844C28877951069
-:1035B0005ADA95AEB63E14CFB6231662C9A1F857B3
-:1035C000DA49271D67CDA85F84C5125837EDA6C01C
-:1035D0003A3F20028583EA22480F0A8C716DF43B42
-:1035E000D71211E791FFD461F69DDB2F60F9DA3F26
-:1035F0006442E87B6BEE10420E3AFE9AD1E7BD7E44
-:10360000A037F55913D01B92AB02FFE9F456D0B1A5
-:10361000D78EFEC8AB5238ADFEF68329D381FE8625
-:10362000131F7C6FF5FE578802ED455D08BF06BE8F
-:10363000EED553A70DF01426A64B4A49442CA5CB32
-:1036400075127F280E7CFF058040E163F284704D87
-:1036500076DA2F1E1EFE85C8D86FB5ABE243808B8D
-:103660007A87D9B79DCEFB065F989C7446E70DF527
-:10367000CF68DDF97598985C30EF2FBD26BA7E478C
-:10368000A97C8D8DCEC6D9D57504DE775E5FE587C2
-:10369000B5AF19DEE9ADA2FDAD051DB85EE223BEF2
-:1036A00041745C7B814AA617021C4C88D7D8F94C20
-:1036B0000778F7013CFDDD0B38D1E8F0C3DB3FB004
-:1036C00056EAFA3FA3D187C0E88BB484AD935CD1AE
-:1036D000F6A7B4761BA31F6235B66F88A1639299D3
-:1036E000A0DD4C018DF81243DB0584BB757251CF10
-:1036F00079B784DF423E70FAC2D6409C75513EB124
-:1037000082DC492A117D00AF35A329BF1446D77941
-:1037100039BE6BE670595D32D905E35F4E6E15B563
-:103720008B245CC06526FDFFD52FDBE9CCA3F5E13A
-:10373000E11443FD9A43FD0CFD4774E41ADAAF3DF2
-:1037400032D4D03EAAB3D850FFC117D719FA8FEEA2
-:103750002A37D47F14B9D9D0BF8CDC66A8DF60BD0E
-:10376000DBD07FAC67BAA1FD26EF1C43FB78E541B7
-:1037700043FD9682870DFD6FF53518DA7F5CBACA76
-:10378000D03EC9FFA8A17EDBB8270DFDEFA8D86AFF
-:1037900068BF73CA7386F6A981170CF579F6C05114
-:1037A000C0CFDDB37E6378EF5F6A5E37D43F2464B9
-:1037B0005C3CFC1281C9194A419E9357F1FE54C4E6
-:1037C0007980E6808EFB303A2DD89C404EF2F66729
-:1037D000B7BD6F9D6990936646C719AC7D67E8FDDC
-:1037E000F8EF67713E211DD6C92E7D3B9BD755FF53
-:1037F000A0F215DA25F53BC95797C787FD35B94AB9
-:10380000E99B90EB287CD5FEAA8ADFA3E351796976
-:10381000624B26B584C929421EC4E79ADE27992443
-:103820006CA2E336B83237AF0498D0B1A534A817EC
-:103830006E81BAA8F849671CB89A3CB2014FB1F042
-:1038400025CE144ACCBDC95915E1A78E2505127C99
-:103850005FB0FB96D2F54A24D04FA0CF2F8A012F1C
-:103860004C7EB149FD7D2027DA7FE968FA4FE87F79
-:103870004C08D5637F05E1D85044FCA037D40C39FF
-:10388000B43D07E1690179A2BD471F289D6CBEEADE
-:10389000A581863A9BEF65EBDFE41BEBDAB83F3797
-:1038A000C293C219EAF7F14A8F75FBE428DD9AA0AA
-:1038B0001FAB2BA2402EA11C34B66BDFB968730F6F
-:1038C0002349148F56562EB6BBB74079D1961D2288
-:1038D0006E420AC54039C04D2D67F0518F3A420DF6
-:1038E000385ECDB5154500DFF8F60221F58C3F3E78
-:1038F000192FEAD791086F0D60B7E5EBE820D38761
-:10390000729CAE1AF55B6CFF3B05998DEFA4A8A2E3
-:10391000E35B08A3B12453E04E6104ACB68248389F
-:103920004F1FA9407C8D2360975A3578066762DD6A
-:10393000C9EDCCFDAE91470214CFABFDB20FC6AAC4
-:1039400014148E079F17F480A554242B696DB5F2CB
-:10395000BE15F8A33947CE00B96E916A8887D62D77
-:1039600079940FE2E89105DD72E211722576712CEF
-:103970009E0AE8EB6C1E04E1A8CD3F98D561CD0509
-:10398000BA1C4DED623AD5B5D7F7AE5F9671F8AE79
-:1039900002BB98966B94C94904F9964C05FA6ECE11
-:1039A0004917914F399CBAE192F39115F874057F4C
-:1039B0007FB5EF7DB4D357687A3C068ECDC38F2395
-:1039C0007CA6094C1FAF2AB24F09C581CB34C18DEB
-:1039D000EDCDC05369685F31FE8AA117DAE2ADA46C
-:1039E000ED56C553BC928E3FA6489A0A74E12A252B
-:1039F0008A05F9D7EFCCA0DFB7F3DE92221AE4876D
-:103A00002B8DD1ADF51321A4D0FE4E2FFB9EC549C1
-:103A1000427E7C7FA1012FF6D2C004328CDA49FFAE
-:103A200030E17B748ECC8E383C1EF9D1EC61EB24F6
-:103A3000050C4F1EFABF4BB9743C4536E88DA565A1
-:103A4000B22F4CBFB3D8ED447A32EBF14ABFEBF85A
-:103A5000F6850A187F79E603F6A574FC8B654DCBD5
-:103A6000812D4D9F8CFF12F8CE14DB3F6BF21F06A9
-:103A7000C6E103AD7474BA49381506B8A7573A7051
-:103A80007FB2F9ED83BA79BE2AB8D250BE5E4BAE92
-:103A900045B97099F72FD685DE3E3808E1215E09D9
-:103AA0003D2F8BE1EBA61C4D6FA9DE493ABBEC82A2
-:103AB000C0F41A51CB10CE12E7E7A6D1A40BECD676
-:103AC0003539B2524FBB48A572184807FEBAE8F71D
-:103AD000C1362320AF95A60EF6FCA706B9B9A2EF12
-:103AE000445FB817B8497931FAE632EBAF05F8E927
-:103AF000FA9F00F839A2F0B3908AA430D04B709CA2
-:103B0000611FBBBCEC21254CFFB9BCDF2FFCC78873
-:103B10000E8E3FA27CA8E30F4B6688E8BFAFC9C5F5
-:103B2000DB447F17C86193EC4339457265DC8FC471
-:103B3000CEAF4064F2260A67AB4474FC4126841081
-:103B4000EEF4AFC29ACEE147FF6CDE37FF01F0A37F
-:103B50003A3AEC1886CF1BA5623A9F34A23AAEA639
-:103B6000EF4B44827A9698837C4BDBC7C829C0BF51
-:103B700037FA400E36F17D1FF16CF6EAEDF22C912A
-:103B8000E135DA1EF2DE616867F64E9366D77BB6E2
-:103B90001AE8A2FBFD641277FFD14764767696E8B7
-:103BA000E1F4B315F76F2BD22644000DB68C1B7DC4
-:103BB00095C0AF1E8270D0F484A617A8BEC812FBB1
-:103BC00044C793F32A8880ED46FD9B505EC7E85DAD
-:103BD0005B81510E10BD3D930BFFCDF420BD90587D
-:103BE0007DCFCB8A9BAF88AF7AE84B127FBF384935
-:103BF000647298A869B87E8DAF08B727CC1A5D109B
-:103C000046AF6EFE5D19E63310F01CC2C11D745B39
-:103C1000057517A9C1FA85D2E230C0C922753613DD
-:103C2000AE1FD59C38FB28EE8749B48EB5A3E3EBD5
-:103C30008732D18DF834396B4800E9F81EB403059A
-:103C400035402EA13D18E47AD5E7053C2EAFAB25D3
-:103C50009FD1C5D80F8CC7FDB994E9F7C3FEDE0428
-:103C6000449041FFEF2C61A5E453F4F4D98D47B2A1
-:103C700014C73353B0C03ACD4EEB34D00366A767B8
-:103C800012960543670A5026DD582B225BC5A727ED
-:103C90006D3C4A57B344182F2D80FC2C792AB02450
-:103CA000CE34B45F697FA522EE3C381DF07E09E971
-:103CB000AE9B6E343828328C174B4F361FDD308860
-:103CC00058ED80F9A6F3F9A6DFD3B41040EC24AA8E
-:103CD000753085517AE734D47B4EAE7F1A0B8A9BC0
-:103CE000CB693F772149BE9196B6BC2E9C3FEE6BC7
-:103CF000FBC178772F2D43FF07C17A637D4519DB20
-:103D00001FF863EC565191343ACBEDD5DE112E59A4
-:103D10007ABE9F68FDB1FA949007AECCBE9AC2F805
-:103D200051A5FF037EF4101D7FD271DCD71BF581F6
-:103D300033E63BBF025822BC17FEAF7C2F89D45B11
-:103D4000154A0A6645F484289E286A92611F65F325
-:103D5000D3FD1DB4A775FA45E5F27869847D6C2121
-:103D6000A3173DFDBFCEE56BDF7B171D5B46C7BDCF
-:103D7000E073FAA0573A15A7A9C53DD7B33246EE6E
-:103D8000AC2C588F74D140E92817F6070522EAA514
-:103D900066658B47EF57F95C93433DE88328D2482B
-:103DA000BE9FA4F03129A2DFE6FEFEF4116B3F5D59
-:103DB000297DD8A718F1F15DF175FE3BD2C7F7FD5B
-:103DC0009E86D744F28CE215EDF1CBF99F7AE2B5ED
-:103DD0001EE5AE4D89EFAFBCD88D4FB56769F0A732
-:103DE0001AFD02D6BB9BDAE2D92D5A69BD2776FFB0
-:103DF000CFC6B5D59A941360DF4A1EC33E6885B21C
-:103E00005E057BFE02D8E5601F06CBD03F4CF298E2
-:103E1000BF160610815F147F88ED6F4244AF07E53F
-:103E20004CA3DFCD946637EAEF29AAA09FBFAD5619
-:103E3000C67958E17B69E8CF0DC1774D1E12B6B93E
-:103E4000A3F40A9F62FE8087AF880E347A05339808
-:103E5000D1ABF1BDE599C5241EFE7A7CEF76E37CFB
-:103E600013CAA5D8F79C92725267A7247E4F2227C7
-:103E700075F64EB916F7E178A276DECB42129507B9
-:103E8000DE9F9000856F133465807C22A8CF9ABC9A
-:103E9000C52817C84E2166DFAE30FA5152B0BF6850
-:103EA000657A53AB279E0FFB6E348EA4E0BE36516D
-:103EB000FF86BAD2C724AA8C1CB5AFB74A148F8D1F
-:103EC0004BFD532A707F7BA8551A14ED37CFA4ED14
-:103ED000DBA9FA1C19A56789D07E0837915CBA0660
-:103EE0001E7A883212A0C9E99B74603B7DCAF148F2
-:103EF00084EEFD0C1DB20DD689FE8923D80F06BABB
-:103F000084FEA64E56A72F427D95D9EFC779494129
-:103F1000EB03145EAB6CBCAEF07A32AF7B783D87BE
-:103F2000D7C97AAC3B645A07FE35073D58B7F37AD8
-:103F30000EAFA7F07A32AFE7F2BAB01EEBAB643641
-:103F4000DE4A29C4C6B7F3BAC2EB29BCEEE1F55C80
-:103F50005E275BD8F72DAC6E3787D8F80E5ECFE1C1
-:103F6000F5545E4FE6F581BC2E6CC17A42799947D3
-:103F7000E16F900F1DD13A2A110ED7EE7A674C3BB4
-:103F8000A3975481703B2C940176D3FED9BFC8000F
-:103F90007FE88663D77A613FD670AB464F3E949FE9
-:103FA00024F3169463197CAC86195BD00FD1304B87
-:103FB000C6FD27E1FE99687BF12185B65F08883E42
-:103FC000A09B2792E3FBC97E51C7E295ADDC4E5E14
-:103FD000C7E3956B215E09FE161EAF5C05F14A0B27
-:103FE000D0A90FEBCB215E990FFB6B16AF6C8078DD
-:103FF00025AD3F07F14A5A3E0BF14A5A3EC3E395BD
-:10400000DB79BC722BC42B69B919E295B47C9AC7D1
-:104010002B9FE2F1CA2779BCB26D46F15B7930FF84
-:10402000B96CFE89F0D1778A517EF6A930C62D523F
-:10403000C6A418DA3DD71BE316EE925C43DD59683F
-:104040008C5BD8F38A0DE35933AF33B4CB69E58683
-:10405000BAE434C62D0A774D36D4876EBBCB502FC9
-:10406000D85869187F70EBFD86F6BC96070CEDB941
-:104070008D3F37D49525F586FE4F9A7291BEB217C3
-:10408000AD34F4CB9CBBDED06F9EDD7FDA04F26EE4
-:1040900042DA15C937F2B59AAE9797B1FAC1944D85
-:1040A000FC7ED4734C1FA18F16FC6A59CC7F65FD32
-:1040B000E4A643B07FB1E4313D15EBAF8A1D4F76E6
-:1040C000EE38A2D2EF94B90F793B75FC48BCBAF731
-:1040D000E85293242627573EC2F6E72D8FC4DFA768
-:1040E000A326A0EB68F9363E1FB82493418F68FBE6
-:1040F0009A964704ECFF7DC7D7DA63C78D7E8FD2CF
-:10410000DE48FD7E38C4E7437584CE5E3077264FA7
-:1041100027A8E7D97ED9C4FD3B65134B8F35527E66
-:1041200059E6213E0BAD2F7396FB995D42AD73C0EE
-:10413000C5925B715FAFF5D7E6D5E89CCCE40BD1B7
-:10414000F92D514ED90D7E856569BDDB6F72C48432
-:10415000FE3F53442061AA9764A9625C0E9D8F7C48
-:10416000D8E45B4A503FC5F50F10B29EC59DBD46D1
-:10417000BF69E38C18F9C7F332CC7CFE0D69E5F812
-:10418000BCD1D3FBBC2C302F980F9F9739E2C0D203
-:1041900014B1E17C474552B15E1A49C6F2DA487F54
-:1041A0002C474632B01C11198865492407CB6B2275
-:1041B00057E17BC59121580E8F5C83CF7D91E158EB
-:1041C0005E1DF9013E1F1619856551E4067C5E18D7
-:1041D00029C3F2AAC82DF87C68643C964322B7E153
-:1041E000F382C8242CF323776339383215CB4191FD
-:1041F000E958E645A66139303207DFCB8DCCC632AF
-:1042000027F2203E57220BB11C107918CBECC8CFF7
-:10421000B0CC8A34609919598A65FFC82A7CAF5F8F
-:10422000640596199147F1B937B20ECBF4C8062C44
-:1042300093235BB1DD13D98C6552E4397CEE8E3C5F
-:104240008BA52BF2023E7746F660E988FC069FDBE1
-:1042500023AF60698BBC8ECFAD91FD585E0E4F973A
-:10426000B3834B4F18E3CF233F31CAF192C3C6F853
-:1042700073F13B4639EE3B688C3F0F7BD5187F2EA0
-:10428000DC6B8C3F0FDD6594E305DB8C727CF0C644
-:10429000BB0CFDF35A2B0DEDB92DF71BE574A351A3
-:1042A0008E672FF9B9A17FE6A27A437BBFB92B0DA8
-:1042B000EDDE1946F99D4E9E30ECD33C63B618F501
-:1042C000DAF5BF34EEDB4A9E8FD9D78450BED80BC7
-:1042D000FFD5F09E35EF408C5C56997C8AF1B70390
-:1042E0004820BEB998D87DB0AF89C5670A9707A99D
-:1042F000C077B44CE37CD707F88E9629B7CCF5028B
-:104300003DA44E2C9D0676CCC5638202BE3261620E
-:104310006D3EC47B52FA138CFB1275C80D7E5A6F2A
-:10432000CAE075FA44807A1661FE06B2B41CFC6CD1
-:104330004D39ACFE56E39272C88B6932F376B5B153
-:104340001CDFB7B1FA91C619F5D09E92E4EBE7A352
-:10435000EF6D35C797D79F4A2CBED75FF2FF41A2BA
-:10436000EBFF6B59E743E097FB776BE003893E9FD8
-:104370006B0D0C80D0DA5973E019501DB982FF30F3
-:10438000F42B12FC1F4A28B78D7ED609A038E9F31A
-:104390001CC9FF4768D7D6DFE4EA7D1EEF72BDD4A3
-:1043A000944C709FA93E26F3BC1282FA52F36B3DE7
-:1043B000EE70A3BC5FFE98BC05E252E6CCF4E9E0E7
-:1043C0004F833F83FE686D5A087E762BE8A18120DB
-:1043D000E5DBB174920E2CDDA40B4B0F64120C8C38
-:1043E000AEBB7BBD596CBD140E5F4BB88FA8C1FE30
-:1043F000F58E89A5B01E0A870B1C0E7F97FA2486BE
-:1044000003FDABF08E642E51B4277609067F6692C9
-:104410002940CC3C8E0ACE998C193EDC8FFD49F2A6
-:10442000203D6AF0A37F8B524646F301E87B56732A
-:104430009F9EE369E320C0E0FB5C1F6AF45C9B4045
-:104440003F697E6EA2DEFA9DE24DBF97C5B8DF31AF
-:10445000493E8CD7C6BE27398DF2CFEC0C601E8446
-:104460002CC58FEBCA161EAFDA38F18AE2DB3BB8F7
-:104470009D4F1A6FBDA2FE5BB475534A80FE591A58
-:10448000D76FBC15E96E107F3F0BEC3A4A4FAFFF78
-:10449000B9BABE05E80F62D2F1FC07AD22DA835942
-:1044A0000BA9E0C989C23BB390DA83C3A2DFCD5C1C
-:1044B00064F4BF8465165F21AD57067F2DAF338B43
-:1044C00012FCBFA6F49C07D93691AD87C751A50D44
-:1044D00015CD362A7F0639593DB3B5F7F9101EB709
-:1044E000C8E47495E9E47E979DC6717B7CD7F4CED1
-:1044F000F078795E09BFF31DE38033CDF1E3A814B2
-:104500005F88EF81DA3C6AE91F9DD7603E7F6D3C92
-:104510002D1EA8D5293EAD607737B554A29DD5E4B0
-:1045200065FA9B7C43471F892C4FE2EDCB421CFE72
-:104530009BF87E32A49663FE23D965A45365A964D3
-:104540000FA0FD26A640B9B991F5CB59966607385C
-:10455000357A5252A0DC542BD6DB28DD34AAC40FA6
-:10456000CBCAFED9091B6B3F9E0C654E5BD75BF92E
-:10457000147F391ED127D1F964A8E7DFBA09CA161A
-:10458000BF3507FC704B24CC23CC6E23F602DA2F08
-:104590007B2EC17E0444209DCF931A1ED556611CEC
-:1045A000FD67664BD7521BBE47FC8374FD3670F027
-:1045B000E5353E50066C9AD7E2993C0EE2F385C48D
-:1045C000378844FB3DCEC773403B8C3386E5316A68
-:1045D000EDEB78BBA5F6BC9A0F654BE7BA9BA05FE5
-:1045E000AB719CB5BCDF20ADBDC4D8BE5A23AB2592
-:1045F000CF87611C534BD77B37C17CDA58BF6EB96C
-:10460000C5FBAFE2FD63E5C560788FFB2BF5F35C7E
-:1046100011835F4D7E84C03F900FF865FE018B755E
-:10462000EB53E08FD4FA2D17D8FE4889C9337DC5E6
-:10463000CCE46197CCFCB61A3D25A26F3257B71F68
-:1046400080B8E50CBBB17E4F8A611F48C6F433B613
-:104650005F9F6B6C2F196AAC17161BEB79D719EAA1
-:1046600017BBFD2F411BE68573FFCB60FE8D0D6DE3
-:1046700095988712F5FBF9EDFA7D4A26EFB7ADA6BE
-:1046800018F9A7C1C9F987FB691CBCBDA9B0D2AE96
-:104690008FBF6BFCD30C7E100BF85958DEF68EB62C
-:1046A000DEE1B589E37B23CFAF7982E3A98DE3E92E
-:1046B00017DC8F13E47E9C353CEFBC85E79DAFE4AF
-:1046C0007E9C469E77FE02F7E3ECE17E9C6DDC8FDC
-:1046D000F36BEEC7D9CDF3CE9FE37E9C15C3BBA68B
-:1046E00082FFEC59EECF7986FB73C670F9BD62ACE0
-:1046F000AF1FF8F7B68E8DBF7F1EC3E9E2C7E0C8D3
-:10470000EC037ADB536F06BAF4B13CEB9C5A8F682A
-:1047100029013B97D165CE2C8F2897809DCBEA93BA
-:10472000B8BE05BD827933993C6F26936A9D74EEBD
-:10473000FF85AEAA4AC01FDF778A6738B842DD32EC
-:10474000D7A30AF1EAE3067DD58000712DC9E44FB5
-:104750009247C0F86C5EF9C1AE0390A7E8EBE82879
-:1047600007740E3BD45E0FFD0A0B83109120E6B454
-:104770009008726945990FFD6F4F7F68F26D813126
-:10478000D388812EE81C519FE5F1FD2CB9DE481736
-:1047900096C826B49B9B6A587E06ED1377FFAE95AC
-:1047A000C97EA3FD90546AF483350527F7EA97F68E
-:1047B000BD6A7C7FD85EE3FEABA9D09827125B165A
-:1047C000EE1263FC5C31EF3B7BFF7E7E6422AE37F2
-:1047D000119DDF66AA2C97757912CEC80F711F1133
-:1047E0006B0F4A60E70DC4BC1A3FD8BF529EC70F7B
-:1047F000FE12294FE1A58F3FF7F37A05D6A9DDF820
-:1048000063189FE2C560379A480063222B8610BE6A
-:104810001FF967BD9F2AFF157710DC4F789AEC3798
-:10482000A84083FE99881F99E32755AE7906FC1F9F
-:104830004FAF1609E07F6B4BEFFCDB239FC2E9C74C
-:104840003852D6224F31E8BD44EFB52E12C7C58B82
-:104850008FCDE774BD6CD1640FEA8D8397CD179827
-:104860000FEBD7F205FADCCEF305CE8C37F8955373
-:10487000AB7AC7E3062EBFB47A06896FBFEEE1FCC0
-:104880004E9C2CDF44A3FBD461BD8FDF7D6E2724BB
-:10489000920EE00B2980F2B3CFED01CC8B27145F91
-:1048A0007A3E69FA76FADBC087EA3A96A748FB892E
-:1048B0007A3B4C9B4786275C2640FFFDA3307F63F5
-:1048C000B0332042DCBA693FE1DF69477BDC31A3CA
-:1048D000C6CFFC65ED04FCF68E1A9F0ADF077C61EB
-:1048E0001E5246777FD40FAB8222A67E349430BB13
-:1048F0005793FF1A9D34788B0F417CFD4289847158
-:104900006F6A5F5DBAA4ED67E87F06B7313A68EA7F
-:1049100043F0DC8D54A086811E897F1CC20DC81F08
-:10492000FE9A5C3FF1E3B99422A6FF4D70DE03FAD4
-:10493000491D7ECC830E787C90BF98D5360CF94CFF
-:10494000F2D40880DF87C4C06E3D5F999C2CFFAB1A
-:1049500029C1B982162E67FB25C0EB87BC3D55EEF9
-:10496000180F72F8E9C728FDC7C9CBF903D70B4F59
-:10497000B54EFE438112E55FADFD4F60A4E9E695BB
-:104980001591597E61DB77DB078C35139E7F647C44
-:10499000CF2C5518F6615966E3F7E434A33FF2CA09
-:1049A000E729A15C2285371BF09CDAAF77F9A9F1E2
-:1049B000FFC5AC18BB23AF00E9396A7794233D6C7F
-:1049C000F412462F9C9E343DE2EAF4ABE2C09EF422
-:1049D000B13178C00676B246671667C80F7E038786
-:1049E000378CE9823A7AF82BD04356DB4884B7AB50
-:1049F00044C5E7FBB8FECBADED2AF3C7598766DFA8
-:104A0000C1BECB5B0C5F88D9FF908A20D8D559599D
-:104A100010C303B5CCFC0B999997DB6F5D59FC5A19
-:104A20008B2767D33FD8FFBCA2E1FD8B18BF9587CA
-:104A3000AA785D3CB5EF17D30531A7271E62DF6B5F
-:104A4000F4947BE2C96FC91448B7E8F01FBB8F8F9D
-:104A5000DD6F13BE7F94BBAB8B500E5B268CC3F80F
-:104A600048F7BE7BE3445CB785E34F6ED1E2FBB110
-:104A7000FBCAB9BEDEFDAADF6F5FE9B318F34BAF27
-:104A8000383FF73BFA25B672BB35767F113B8ED89F
-:104A90001610E39DDBC86F33C23DAFC568FF0CE362
-:104AA000FC9DA31AFDC8036AFBC5F777F27CB5CA63
-:104AB000520D4FCA9DFF41E977F62133E6E16BFBCA
-:104AC00060CDEF349BE7AD55F23CB619A4C20D8D15
-:104AD000678988E777CE92F7DDD7E8F8A6CAC2CE15
-:104AE000D19166F371387FA1E567CD0CB2BA369FDC
-:104AF000EA3663BD8A4C4E07BF6B55AB99403ED634
-:104B00006C221DEFD4E64FE9F8271696875A4D6AB6
-:104B10009A40BE2DE379AF951E22A5A61032EFA5CF
-:104B2000A746C2799E7916267F4F53F82B3A7D7D92
-:104B3000BF3324037F7FB6F79A9FFC80C0FBA1A6FA
-:104B40007EA03F93E39F8398DE6C9CDFE5E61F3BEE
-:104B50005FED9C46A279483B85B8F93F0F6BFEAFED
-:104B60002B3C47B215826223129F23B9DCFB3B2DFD
-:104B70008C7EFEBBEFEFFE9EEF3F7F99F9CFB376C1
-:104B8000DD8879DE6935152057B57C96F924E00774
-:104B900057BAE9D5496A7F45D7CF7B85FD32693F52
-:104BA000D315F4CBEB7DBC739CCF7FBF6BAB0CFC00
-:104BB0007BF697C726823F70CE6F4CC44AE9E0DC93
-:104BC0002E173F2F169241EFDDBFD7E40F613D3C1A
-:104BD000F2365DBE206616D2F1E7FCDA85FEC4FB34
-:104BE0009FB78426D0F7EF7FF1B36184C2E15C7D8B
-:104BF000D79BFDC10EFAA5C0F2AFD4CE61B7D1E705
-:104C0000F74BE4BE8A387AAB83F3C199571C5380C3
-:104C1000CE849DFBEFC571DBEF345B74718DDF5B80
-:104C2000CC087FDA8F9DC77A56080D12D8FCF4F9AC
-:104C3000E25ADEDB99670536BF97CD211BCC6FE7C3
-:104C4000663940FB2DD8F937A4EB1B7EBDDB0D7018
-:104C500058F0B2C9207F16EC34852DC3B03C6641B4
-:104C6000FFBDDF298C047812D457F3F7CE9B00F4F4
-:104C700030BF7DD5DF4C6E78DFC85F142E78EE63D1
-:104C8000CEC726DF04A8BFF08C1BECD9D31DDBDD1B
-:104C900000573AEE3499D2D50FBFD6F12161E347E0
-:104CA000527A8E071E1BA0AF05ED2BD8F7F6DE7AE1
-:104CB0000AE4DB82183E3E0DFFC8E8A93F2216A396
-:104CC0005FF202796724D81D64676ADCFCE26EFD3E
-:104CD000C1F97ACEEE0B9BE03CF199E7FFB209EC0B
-:104CE000FBB9FFFC6AD3C3E01778CDE60179B4E0E5
-:104CF000971FBA890EFEA95666CF9F7BF6991D4F66
-:104D0000503E39F7470BDA3BE77E7B2A5BA1EB3F4E
-:104D1000B7E71FE970EE76D16FC7F605782CDA7722
-:104D200043DFDEF61B40B7218B1EBF21C4AFF2323A
-:104D3000FD4E5F020758581983A7D7F7BE9E0DF3A3
-:104D40003C7BC482E76F16D067B5C580B779A81FD2
-:104D5000A0BE84C27BFEAEE57F330D8B0777B5BF67
-:104D600008678548B83FF102DE6FFBF1E81228CDF5
-:104D70003E05C6235D28DF63DF5B7098E2F7EAC477
-:104D8000F8BC40BE9101FE0B76AD60DF6DA7F874F4
-:104D9000F7C4E759F8C7A89EF82CB6C6E273EED35D
-:104DA0004F40E3DED4B879241A3EE7EDBBA357BBEE
-:104DB00041930F9783F32C9E37F54F8BBFDC0A7C12
-:104DC000F6BC43F5323C8726D0B673BB2F64134A3A
-:104DD000275F98BBEE0539D9F55B8B670B7D7EFFAE
-:104DE0006F3F46BE3BB7EF3D5961E74F9C02B52B85
-:104DF000CE91EEBF0EB033E6F3D8DA826DAEB0C519
-:104E00001DC5D7FCD0A4718A1B9F1FC3E721C60F05
-:104E1000F343FB6F17E2E06F893597E9A7501F84D2
-:104E2000CB3CD221C3F97C3D5E8552C0E7B11B81EA
-:104E3000FE12E1535BBF07D67FAD0EAFDB181FC775
-:104E4000F69F4FF915E4700FFC86848FA13CB7D90B
-:104E500022417EE4391E6F8CC57B14FEFCFCE47796
-:104E6000B4171FB226884370385C8EDF2FB7BEEFB1
-:104E70000ABF195605C78D85E3996FE2EB83F55C90
-:104E80007ECC2735E3FAE9F499C54CF5590ED87B69
-:104E9000156A7F213ADFA67613CAF9333B4D21D03C
-:104EA00017B1F2627E827D72C8CAEC97F92FEF1FAC
-:104EB0000672EDCC8157385D32BA9FBFEB98AC7269
-:104EC000FD10D2EB870471CA5FF2F116BC1A7FBCE9
-:104ED00005BBFE1677BCD392FF4E98FFE90E335107
-:104EE000E910A7DB4D71FD49AD56B331CFD635F290
-:104EF00048127DCFE4B62BB0EE867AFFC72AD825BC
-:104F0000EF9BD1CF4224DF17163C6F6D575652B836
-:104F100035B8ABD0AFA28DD7180327C95BA10A253E
-:104F200070FEABA284D9D46CDE5ABBD9231AE64DED
-:104F3000F56E26E8A5A3C34F99619D9FC6D88F9FA4
-:104F40004AA4A92F1DEF5355F02D55E2ED178DE31F
-:104F500007969888A2D78796AEA3301FF23B1B0115
-:104F60003FB2E9359B0AF264C1265B08E29BAFEFD2
-:104F7000BBB803E076EE690B8F77B23CDB6ABE5FAD
-:104F80003BB5EFE2A6FFA2EDA7E065FAFDEA4DB45E
-:104F90003FD8EDBB1C98F4FCD7E79386112AA7AB4A
-:104FA0007FF7F044902FD5B0C7A2FDAB7FDD37D49B
-:104FB00040C73BD987D54FEECE0A015EE6BEF0DB97
-:104FC000F9A04FE6FCCA4180245FDFF7F1BD503FF6
-:104FD000F73B17E67B9DFBDDA91F021F507B5BD1D2
-:104FE000EBF5D9FAF3DE74DC395067EDC2255D1EAE
-:104FF000C11C2829BDCF7939C90FFB715D3F7C6F7A
-:1050000081A5EB21744011B59F887BA2703FE0C35E
-:10501000393B8DDFFBAB95D9530BE4AE2AD63FD895
-:105020008FF16B07BEF78D46A7BC3DF67DADFF7FC8
-:105030005A7363C661EFCFB7909A78F46FB1B171CC
-:10504000E7ECFC36DF381EA3D79EDF61CF7F2AB0A6
-:10505000FC7CB2C786E77FE7CAE1C129945F5F9411
-:10506000C92CE0DBB9EEF0E064FABDDF707939D726
-:105070004EEBF4793F3E0FE80F7562EDFC15E077DB
-:10508000DE4B3602F43EEF772EF42BCF7BF1E2C9F4
-:1050900027E9F333FB1C98C73AEF778B11DFF32C2A
-:1050A000E17BC18FD3B5C782FEB1337BDECA067BFD
-:1050B000E48C399C9DD28B9F685EBB853B2F8CEB2B
-:1050C000A0FB82821A27F839595E4E2D61F70ED463
-:1050D00042E207D0F12736160FE1F1A907B8BFE881
-:1050E000FC0C2509E77FFD2DEC398F5F3F70ABD2BB
-:1050F0003759370FC89B23D7D07D895C930F72D661
-:1051000014B98528B42E450662A9F533C1FD0DE01A
-:105110000F4D2368BF9BD37CA49A968B534800CF36
-:10512000FF386FEEE6B33F50143FB041E90BE3F9AF
-:105130006C4CBECCB3FB47DB306FC478EF82BA8FC8
-:10514000ADEB22BF4F2176BE17CDAA05E479346EB0
-:10515000C7F2066B25E563F0FF92435C2EF5583FDE
-:10516000E3B3F39E14E4336D1DABEA3C284F56D4F1
-:1051700079B15C5E574014CC77F661DDC4E16129FA
-:105180005409F8578107E1CFE2ACF0C37D16302611
-:10519000C4534DCE00D297C55B83BE022B8F8B9A32
-:1051A0009C2AA976429E078393C959817092795DA2
-:1051B0006A9B8070A5EFE3F3B1F6C00CDB08C83F33
-:1051C0001E6A9053725AB1A1DE036E1A5DECFEDFC7
-:1051D000861F4178ADA8B36209F9E20037C8178786
-:1051E000FAFF07F8B530F85D47141DFF40FEB662C0
-:1051F000E0A704F0DB40E19716E5AB5838D4F23C69
-:105200001D8D9F12F12FE4DB4310667D5D1B96DA46
-:10521000F394047AFDAC8DD923B524B014E3A11E18
-:10522000E68721692AC9D4F99F8857C5732078DE9B
-:1052300014DA336F41FFA5865F93473A69947FCABA
-:10524000C7B09EC56F9B459057A6DAADE4335D1C91
-:10525000DF34A1C2A6209C7D02C4351AB87E5DD67B
-:105260008D4F237FACAA53B05CCDF9642DE79375C5
-:1052700080775A6FF0B1FC9F967104F5E763B4CE66
-:10528000F6FB61A2F78B27FBDAC3668A7F94490A93
-:1052900096EC1E8E2396D020FA9EA390603C23F9B4
-:1052A000C8CF42B856D28EE7AD93B57B605ECD4D88
-:1052B0009E8A712062667A8A98581934C33E2A16EB
-:1052C000BE0DBE0378BF44A2F9941D9D2DC0F72EDC
-:1052D0004E65B1B3B47BDA8FC07D10CE16073BA705
-:1052E000E8AB19908DF2D582F4EAF405846A1D1EAC
-:1052F000D313D87F4BECE3FF03E8F113C84BA4F8BA
-:105300005DDF3610F35A5699DBBD200F57F1F31AC3
-:10531000CA140A05DDFD626F7039E92E31CA014DEC
-:105320002E7BAE2F36D0B3267753C618E95E93BBDB
-:10533000BFEE96BB156741EEA64636225FC6F24128
-:1053400083595685ABF13E1AE67F3A26B0FB327A96
-:10535000CA038CBF9FEFCCD902E7B135FE895DBF90
-:10536000D43C1EBFD36D0F26C87FECCFEF6568A677
-:10537000F446F2215F414144ACA174066590D21914
-:10538000E3A7522C353AAE274C86A87B45364FEE24
-:10539000AFD5CEE2D45B8BFD80C765ED8C87B2ECD8
-:1053A0008CCF96A589A0BB8844F7934EFA48DA3F84
-:1053B000CA0AF6A56466F1FC2E97D80EF1DC65CE1C
-:1053C000C956C82B15924B907EFEEEAA1CD05B7C72
-:1053D00007EE5F03FAF3387DE438EDB78CDFEB645A
-:1053E000F21413D897EE7676603E94D32E1AE249E3
-:1053F000F3EC815CBBAE5E045FE77887617727B82A
-:105400001F6A185F0FC954499E4E4E74DF97A4A8B7
-:10541000A440272FEA07DD88F731F5941309E4E16A
-:10542000F6FF1979D83020847835C7CA9F343FDE1B
-:1054300001454B15AE56A0D6F9B2BB87239DDE6061
-:10544000877D88734BB71DF4A3DC9EF38C957F5149
-:10545000BDA6A01F8CEAB5C74B419E26D46B35F77D
-:10546000211DB7F457808EF7AF79F869A87FB6C6CB
-:1054700082F7BE5445561085CEB73A320ACB596DE5
-:105480008F6259D9B6993211214B5757AF990AFDFE
-:105490003798D0FF733274CDB95A5A3FD96241FB65
-:1054A000FDE4C6070780FD77B2C5A198C0DEDF38EE
-:1054B000C2D8DECCEE7F39D9660E9918FD5E324136
-:1054C0003C8270F90E5E20DD7C49898276FCF99879
-:1054D000784BE55A8B5F7027867F655B7C7B12CFAC
-:1054E0006F63726E4D3EC8D7B2A33F1B00F4A1C9D3
-:1054F00099C52954EE01FC8E5A48BCB8C058FBD857
-:105500000580A7B176FF6286AF2BBB37EB3391DA0C
-:10551000DD88A7807B92C1EFCBFCAA9F71BB9C5812
-:1055200013B4BBF9FB9EF8EDF35AFEF2E62304F246
-:10553000548D7E6D13F8AB05D88F4F62790F5A1CCE
-:10554000A8275D337BBAC582726506F74769741E6A
-:10555000A5B3809B9FDB33D0E1ECC83A947BC2AA11
-:10556000A2C74751F87D45E90FE8435835BA2FC027
-:1055700077E9CA1FACBD878EFFF53B267C3E2B62C8
-:10558000C3FE5F3EE27BFC1ED82FFCBB19F349BE75
-:105590003E3416E3C95F9A8D7E8C32079397AF71C4
-:1055A000FEAF8AAC32D8E755CDD365F0835645D6E9
-:1055B000E0F32A0822619EFC5D6F9449105F2298F7
-:1055C000E7F29AFDCEB1F5A84F8BD18F56BDDA1216
-:1055D00037CFFF35BB629057D59D2D382EA1F65998
-:1055E0005A3A1F4F2777AA23A9C81FC4A312C8FF7E
-:1055F000AEE2F2A77B7E1BCD06F9F3A52DBE9FE69A
-:105600005D3B5B6755E407C8773DD7F7437C5EA5F4
-:105610007DB793F169743D8F8F8AB79EE83AAEC724
-:10562000FE5F26C7FFFE050EDF9375B3889FCAAFE6
-:105630004A0BEDE784EF3FD8540AFBFC8DC9298261
-:105640006E5DD56D73885FB7AEEA8DD364FDFD9452
-:10565000513C2C32E0E1C2CA05888725F68A63A056
-:10566000072A578D1E16C07DFE0A84F367665F36D3
-:10567000C8E3536D0FBAE3E5175F88C54F1BC70F2B
-:10568000B5BB4B74F8D1F012FBFEC93F57FFFD11BB
-:1056900090531B5C06B9125BF6C05B4E7CB825715B
-:1056A000FA3C49F57700E1A6BC7804E87AB503F343
-:1056B000E412C3EF2A12E80D7E09EC676A67591DF0
-:1056C00023E0BB04E150DDC6E8E072708B7E97D327
-:1056D0004159FCF58C766874504B54CAB0C7E5CB81
-:1056E000D1C1C344B5F6B28E6E3A687BA32C2F4A63
-:1056F00007A31DC1B1F5B4DF1760FFE4F7C4FF7164
-:1057000059755F07F6CE4A13C6BD8EDBD5F4BB587C
-:105710007D38C8E7E3EEE0C4EB4AA2F5D9DB07B970
-:10572000F5F73A9E6AA6708803BFD18E04F493A75A
-:1057300092C291FFEFE8E73373FC3CD1B1F6B2328D
-:10574000C02709C6F7276BA526BF4D49CEEE7D2F92
-:10575000E8D1E3CEDCBF8768EB1A7BE056076D6FBC
-:105760004C7E08F5FCF1E302EAE1A57F5E9C0F7236
-:10577000B887FD5B1779E2C420F45B3E79C28CF6F2
-:10578000148E4BA8FD037A00CFD7E03EA03FFA5914
-:1057900012C5731F84CB7F4744E3BA5AFC76595D28
-:1057A000C7A3303EB1AAC4A39DD757A064F6D87F43
-:1057B000C23C74FE79D91CF0C0B92159201540F7BC
-:1057C0006629D00CF986666FDA705507E7850E9664
-:1057D00097633B78B03987BE6F9BF9070FF8F92CB8
-:1057E000F43B505A33A5F37A7FB939AD9DDD7794F8
-:1057F000A77B9E0BE7A269DDE077A0F3ED65DFFCF8
-:105800001BA1FB9E35BCDF78AA76D117808ED2CD46
-:105810001FB5FC15A991B5276BCD8DAC9DFB51171C
-:1058200054323FE9EBD392107EDABAA6BEBA1CEF2F
-:105830005B9BFA6A069E739AEACCFF1CE0F91BC8D0
-:10584000FB01BA4F66FA39962E1EE5F2E7EECDA2BD
-:105850006AA6E31D34771D70005FFC54C07DF55DC2
-:105860001F1E3403C9FFE9F07133DC97701FA4EAEF
-:10587000D0F54C238ACC8CE810BE3F9DB4BB58BDFC
-:10588000BD0FDC7F1A1D8F6E9961BC852CFE7CD705
-:105890008787C7821AA5E32D83F2BE77880CE34F72
-:1058A000DBAB34B163517CBC57E9786274BC6EF8F1
-:1058B00049568447143E568497061FB85E04DBA3FE
-:1058C000F0457B45836F03C08DC26F6AD2949BC93C
-:1058D000B0C4FC32D539F873765E8CCD2716BE5F26
-:1058E0004313E5B7A71CFE3DC07F8D0EFFF3C03FFD
-:1058F00073AD5DD9522E9E077B119ECF370506A44E
-:105900000FC47362F97D200FAD237E9C37964F8FB5
-:1059100002BF5C0D25E50B98073FB7722F5FE7EBE1
-:105920003F3BE5C2F328FB3ECE86729EA973F59DF0
-:10593000C06FFF6642FBF3FCDEFC5EF3EB8E72BFD2
-:10594000CBBB0E7E9E88AFF33E6ECFDDB7D7118204
-:105950007B10EFAB3575EFAF80AEEFAB65F9274449
-:10596000EA1876BBC19E6CE4F1909EE3C07E21767E
-:105970001C6D9D07B2FB5D05FBCBA747C8B88FD850
-:10598000FFCEF93F56D3BA3DCB8AFB84D5C99C7E66
-:10599000CBD8BEF5E964BFA308FC5F2B537C2A5D1E
-:1059A000E7CA3748BB48E17460C843A1F212B81790
-:1059B0005A44DFD9DAC8D66039BC57C8EE9DF170B9
-:1059C000BB746DC7F136A0C753472C1877F8D2C502
-:1059D000CE13AE345764831DFFF96639EEFD679F21
-:1059E000BA249CEF66A153003A9F4E825690177BD3
-:1059F0003B26F785F9B87DC403E47F6AA34964F7C1
-:105A0000A369FE96B0C4FCFDAAC4EA7E5E7A6CFA75
-:105A1000FBC6568C1B83791E335ADEC3BC5A7709EA
-:105A2000F3DBC5CE23C9C9E6EBEA48C17C52D718DF
-:105A300011F3B15DBE2E01DE1BD0512EE3FB41A15F
-:105A4000D7F7072CF18C07B8C2FB20E7075CE1FB16
-:105A50001627CBD35AC7F7D99BCDBEA631749CCDA0
-:105A6000AB9305C087D64F7132B9726A8CE6470A8C
-:105A7000A21F293BCF63837B2CB2FDC8DCC4551227
-:105A8000C4FBBEB7403FE66745386C1EF26218E2C1
-:105A9000D82BC1BF027836337A5AB95A40BF2A850B
-:105AA0005F3FD0139F3F66B905D631A059F0C0DEE5
-:105AB0009D9671E73DC5656574DEF238EE0BC14D0C
-:105AC0000BE3666FFC00E7E54AB0DE7A17BB27FF01
-:105AD000F3CBD0C7570E766F62766D07BF1F2F8C42
-:105AE000F7E005B57BBEFC25EC7E13C9AFE8F36398
-:105AF000A2FCB394D321F1439CADB2540E811F415B
-:105B00006CDE3C05D63D3D682137D1F5B5081D7EDC
-:105B1000E0177584C8EF53F21F0538AD59D717F356
-:105B2000F0968BFE6CD0C3EAFF91314E77C07F7E3A
-:105B300003DC1FBFA95446BE380070A7F5A797E441
-:105B40006E8638A5ABB6BC6D3A1D2FE49151B234C8
-:105B50009490B7F3214EB944F408B47FB042CBDF40
-:105B6000F6E0799EE1A6AFC617401C2F43449FD2B2
-:105B70002981DDDBB06C49B907F0BACC9326E8F790
-:105B80002F77723A389A5271A793C2C7FBC87A0F1F
-:105B900035E3287FA65E057E44B55956B6B3782115
-:105BA000DEF790CAF192DA2186ABDC5877CE4A81D3
-:105BB000FB7499BFF4D19B03CCCF09B1D191E8E735
-:105BC000E47F5EC46B1AAFAD1C6AC74A6B7D15F6E5
-:105BD0008771D2E938A9256278241D774BB27F13EB
-:105BE000FAEDC65A114E44EA6C033885C6F6C3BCBA
-:105BF000F0F5A306BF07E758520F754D063D1ACAC8
-:105C0000B2FF6933C8A965B2027C9EBAE4E43D786C
-:105C1000F99BEF170F4299DAF8D1C320A7933BFF06
-:105C20005687CFC7C906FF62EA275F7E0BEDA9152D
-:105C3000B2C14FF94D4AC5CF012E9B0A8341BC1713
-:105C400013309A1E5DC7EEA51DE3E0BEE3539344F7
-:105C5000DF16DE8EEB6AF5845632B895805ED0E0B2
-:105C6000B65C54DAC3B0AE8956A48F3CD281F22A16
-:105C700003A2D903A37849FD64C542C8D7889DCF44
-:105C80001AA7D07DFF06DC1308B882FC1839630C14
-:105C90009E43DC53DCE1057B7E7582FB73DE75B1D0
-:105CA000F72D22F3B3C6B6BFED62F40022B1AD18F2
-:105CB0004B7F11944EA226419969C5FBE6F688CA2E
-:105CC0007F209DAF3729801FE86FA6F8DBFFF669BC
-:105CD000F42FEE0F7E80E5B3AE02FC1E6D0FA7D34E
-:105CE000F7D794B0FB8ED778188D5437337951EDB0
-:105CF000EDB442DCA4BA9078B6707A53353883BFDD
-:105D00008CEBABCADB195CD30A09C67DC11704F75B
-:105D10004DA5433F0ABFB4E6A50B118FA4431D4810
-:105D2000FBAD8171013F8D2CAF9F904E2BF26FD058
-:105D300084714FCAEFEF825FABB2A52FC6FDE1F8C9
-:105D4000308C97C2BF9BC2C7DB4CC701FFE1A9667D
-:105D500013D982F2AD03EF675796505A46FAEC2AF0
-:105D600083F39A4A89C7B352A3034D8E51D6984103
-:105D7000F505C06D86AA2E04FA3B6EF5BC0DF370D6
-:105D8000B45A1458FF8CD6971683FDE2F07636830A
-:105D90007CA82E65F34D69A1CFD1CE51DE85FED50D
-:105DA0002D16857D8FC3AF84D31987C34C3EEF99E1
-:105DB0001BD9BCED59A120D067F5120A57680B30EA
-:105DC000BA0797E82511F9EA10ACDFA5A6E3B87D7C
-:105DD000A6C4F0450CFD69EBAAE4EBAA5CC2D6456B
-:105DE000383FD1698561DCCA12B6CE1984BD2FC295
-:105DF000733AFE4CBE9E4AF5452C67365B0CE36F4A
-:105E00002AD8D601F3C92994153C3742D87D87D9C1
-:105E10007C5DD98DEC7BD9852F22BC48AD6EBEE868
-:105E200057D5D5295F9D7A8B3216B573856C2B12A9
-:105E3000D3F19FC918CFC96B35AEEBD48AFCAD70D6
-:105E40001EFCB3C7648C7BEF117D4707E07E545680
-:105E500098FCF17D3001E4F4CC461FC8F1DD650CFF
-:105E6000FEA76E2521A08741872A5200DE830E05FA
-:105E7000785983F1740A10A15BEED1F9D12D53B397
-:105E800000F23232F0B95920074AD9399F2CFDBCB3
-:105E9000E9FC529BD3CB211F2AAD34A55CC6AB5D78
-:105EA00063DA0F3D315984F6834F3C08DFC920BACD
-:105EB000F5D076D93D909D6B39485BA15FEDC94720
-:105EC000001F2DFC1EF24130B3142C0F42994AF9E9
-:105ED0007B550ACC53226374F7586E7F6C249E0363
-:105EE000C794A7622CC324CE3D97BAFE43787F5552
-:105EF00088D3CFE5560CFBF3ED8FDD3804F6F16B5C
-:105F0000C04E4C8273BC9EAF204F47F58908F735D1
-:105F1000E6B0B590D69753BB11EC97B5051F89C075
-:105F2000776BF6121FD0476AC53F2D7A3CDEE462DC
-:105F3000BFCF23C96415F0FF812127C7019E42FB13
-:105F4000A9DD49FB97FFDEF98403ECA13FB23C9841
-:105F5000CD6FD5A0FE7E285B8E7B1F2FB98C9D1840
-:105F6000DB3F65D064F4E70D685D370EEEF7AC1EDD
-:105F700027F96EA2BDD35ACBCAC08E512A2875F517
-:105F8000A5F3DE387C2930A13281C5CB9471ECB900
-:105F9000328695ABEA0E3D0AFBF6E04EC99647E71E
-:105FA0003B7405BB576C55E1796B80DAA52565CF4D
-:105FB0005B6FA5CF4F94502D489F9FB8FEBC0DE25C
-:105FC0003B4F9794A7023CF7361BED3A02975DD101
-:105FD000FD509125E877D179B57C48109E264BB8C5
-:105FE000AD92D64D2F39C1C2E9B1CF59D1B2790A9C
-:105FF000D0E98C0219DDF6B1EBFD88EB93E9B55DD4
-:10600000E3E07EFD1C9530FF7EF07114CA33B9C801
-:10601000C8513B50E8B85AD9FE2428F9DF04B91C0E
-:106020002C0CC8F08A26CF5A0655EE0079F6676E1A
-:10603000D7919A5978BE0CF9DF04F6505759BC7DB8
-:106040005389D38EFD4F6DBCED63F053CFA865F639
-:10605000FE808D5F09880F6AF765D0F10794E055DF
-:106060008364C692A0B508F09327124581F9B41352
-:10607000D82704A9FED1C3411BF7BFFBFE429705F9
-:10608000F9B0046C67DD7A9C7C3DD93EBA9E387AC3
-:10609000BA987FF7A74F7DB57F14C07F09DB220D2B
-:1060A000081E13ACBA790C50AF6C1ED7C07860BF15
-:1060B000BAD8F9535749279E938A95EF60CE03DFEC
-:1060C0006E729C1BCEF6F74679DAA3CEE92AF679F2
-:1060D000768CBC2AB2B4DF8CF8DDCDEEBD868C5850
-:1060E000681788A8B07B3F43DAFDD435D06FA8CBC2
-:1060F000E9013A6819F25131C06735B717661612CF
-:10610000DCAFCECCEC407B617A23B717245F130859
-:1061100059C7C664B252673FA0A9045BE8466E2F18
-:1061200068FA9FEBED6A6F4733EA55B00F747AB5A2
-:1061300052657A758097E9F5EA66FA1D8513F3488A
-:10614000BD5DC2F4B8D2CAED07AE8753F977D39AD2
-:1061500099BE4A053BC20D69102AEA658C61A547C4
-:10616000ED963E854C5FA6B6EC41BDD60E87B64790
-:1061700080DC60FA32EBBDC32A80C94B1FB75139AE
-:10618000FD246FF77AA87D9612B5CF968B3CDE443E
-:10619000987D8839FF749E8F427F9DDDB88DCF6FCB
-:1061A000CFC1945B40BE6E0FE6E2F9728D6FD1FBFA
-:1061B00049EBD9252C7F25BB96C5C95DBEAA1D26F6
-:1061C0005D1C62968BDD3B344BA3ABDAB017C60D7A
-:1061D000C2FB28C7D9FD3F2BE0BE1EA017BEBFBA29
-:1061E000CEC9FD1A9C7E12E9134D0EB988DF5D48B9
-:1061F000E17B22B403E5B54AF74BB0B613C1867E06
-:10620000F703BF072795C0FCD78CFA3BE67F0C4805
-:10621000B05FFC54DB677E47B9EE1A7798ED433BDD
-:10622000C4B8E77B32DDCCFFD02E1107C0D3166493
-:10623000F7C8D94AE5B8FD93DCCCCE3ECDE1B666D1
-:10624000D40E3CA799503F4B4435C5D1A79ABE6D9B
-:10625000013C5F47FBBBDE6E52719F1EAA30A17CE2
-:1062600025B8EF0C924EDC47AA0532FA0D5BCC4103
-:106270002BE0636D09C7ABC7BA19CEFB7E67BC5074
-:1062800078009E57F8C5909003780E798A985F073A
-:10629000EF413845F7EFFA78C510B7C8E1A4E00F31
-:1062A000F30D6866F4B566948CF358393C7DB329D8
-:1062B000472F7F052E3FD939B195A3DE44FABAD2D4
-:1062C000F955D53EF7D4095D3CF1E486677201CEFD
-:1062D000BA7B307A3D4F5155FBB7D66D71E204DD84
-:1062E000EDB08F72C23E30749721AEC9F13BC62D1E
-:1062F0001AFC6E205FCDB8B908F503FFD2EED121AC
-:1063000037BC4796B0B8ED6C1EB73DBDED363C5777
-:106310005E44C9CA1C07EF5FD619CFDF7FB9FD996C
-:106320007ECCAF1132E409CFDEF1CA50437CD84FA6
-:1063300094B491EC1E63D4D36FFA548B297A0F81F5
-:10634000763FD695DEB79542CD30DC77910A2CD3D7
-:10635000490D965E12C4B21F6967E766619F3B10E4
-:10636000F44217960AF1884427F773890FEB79A452
-:10637000024B09F0961A8D4B483BAD98BF01F10BCB
-:10638000E0FB44E7CE7CEECA856EE4EF9AABD9EF32
-:1063900018B178C564B7FF0137E2218CF27B3A1758
-:1063A000E5877E35B41DCE1F3DB09A9D7BD1E43B81
-:1063B000EE6FE8779E4B61FA405D2FA01CAB774CE7
-:1063C000FC21C2B3C57C461F6F20566B1EFC3E8865
-:1063D00036EE74EE6798CEF520B8BBD9F9411F9E12
-:1063E0004F9A0EFE065D3BE96E67F7D968E3888E2B
-:1063F000EB07F716EFD3BD8FF9D19531FB80CBEAD0
-:10640000EF98FA8CD8F7BFA1134A8FFAE39EFBA14D
-:10641000928DF4CAF537252805DF6BB61CC3FD58ED
-:1064200070AC5F0F9767391F687A65464CBE476C42
-:106430003943E2FC11330ED580C970AE17EF96D008
-:10644000F1B7763FA9F6BB5AB3FD013983BDE60526
-:106450003C7AF8BC83646379062DBF80BACEBF7FD7
-:106460003829F0925BB71FF1F86B44FDBD377339E3
-:106470003F8E35B594819C3B15203ED847CC2635C0
-:10648000EE1F803FFFB009E55C7F3A6FB918EF1D42
-:1064900053C514ACABF07B2F67EBD839A193FC7ECE
-:1064A0009A1DFC7E9ABFF07B858BDA164F043A3832
-:1064B000CDEFA529D8BBA202FC3E45ED8E69A0F721
-:1064C0008BDA4757437BD14E0BFB1D1F2E27B47928
-:1064D000C1B96C3BFD4E26FD9E3505E40941BD7BEF
-:1064E000B6C51E82DFFF39DB6E62F7AA168A789F77
-:1064F00003DC8B66E2F34B4A81EFFDD7BD608F9CD6
-:10650000E6F2E48C3B99E14B5205350DD252880FEF
-:10651000EC9A758EF9780EB2CA19DAF1441AE4874A
-:106520005B7DF5F4FBFBF7BC940DCF1F77CCC7F276
-:106530002F1B3ECE06B97576DFC7723CBA9D278504
-:1065400065F04FCDD92B88103F296B9F26437CA443
-:106550006AD77EF42BCFF304B07D6EDB1EAC8FD9EF
-:10656000F51EC64F06262938AFB31901F4F3E6B578
-:1065700059C2F07B1CBB7383F7C78DDB27313DB35A
-:10658000CEF11A8EFFB8E3B537112E1B2C78FE63BF
-:10659000FF86DFE3B867F6BDC4E74B305FF0ACAD14
-:1065A000FDE8CF417FEDE1E731AD1D6EBD3F584ABB
-:1065B000120CF2F5AC8BC7BD322FD38FE70B1267ED
-:1065C000879BC9A50E37C4CDAADA191CFE620ECB73
-:1065D0006047CE691714F83DBDB25D9BF13CE09C6D
-:1065E000BD563C2F3107E00170A3F042B8B4EDC7AF
-:1065F000F9E7025CFAC03A3EC07CFCBCBD142EC375
-:10660000A2EB9EE30C20BF6AEBA57060EBDE7D3948
-:106610003C058C786A7B4F06BFCCDCBD02C26FEEB6
-:106620002E368FAABD6C5E63764D43FC9FD947140E
-:10663000F0B79CDCF3F16958CFD97D56BCCF579B9E
-:1066400017A553E22E06FE61744AF632B9AAD9DDC7
-:10665000F342E9F8BB03DDEDBBD8EF9202C86C94BE
-:106660005E8BF64EC2B86009102FF0BFA77D28FBE5
-:106670007DC16036C075F7E87036CCFB8CF6FB4800
-:1066800052301BF0E273074A9274F8F8F2D84BA824
-:10669000170BC49A4F1F013E7E5E44BB68F127EB87
-:1066A0000CF7ADDC003F483502E0F6AE1BE1D67DCD
-:1066B0008F4B90E54B9100F26315E7C7B39BE9BEA2
-:1066C00093AEFFCBB617B0FD6C8631BFEA2F6DAF2E
-:1066D000A700DC2AF9790C12BA0DE511854BB33508
-:1066E0008E9EEF3ED71662E715CF09FC5ECDA7342C
-:1066F000B8D5C8930D713E260F3337E61CC47D46CE
-:1067000028FE39C7583B29F6BED444F900C7B93C26
-:106710003BC1EF3FD0F4EE6477605A529FC4E7BDAF
-:106720002B57CDCB067857C2D948BC0775FF4DE033
-:10673000AFC07343EC9ED430C0E7A4760F2A79E94A
-:1067400026C8333D99CCEAB5491DCBC1AE3DA9DD84
-:10675000ABAABEC1DECF61EDADD04EFBFFCA5D512D
-:1067600093C4EC7B81FDBE8F39197EA741D31B8971
-:10677000E160FC9D8667E85A012E74BC9FE37812A5
-:106780001DAFE8FB8FA7C9E9EF3D8EF57F761C4D65
-:106790007F017F42EA23F1F986FE4FC0EFBFFB3E47
-:1067A00009CE34F0D5C50D039B208E7681DF23639F
-:1067B00069594A409FCF6C5D17F7F7DFBAEB3C2F62
-:1067C000471E48F94DC7D78792985D7E88CB69F8F8
-:1067D00083F89676CF24FCB5A463EA12EE9FF3F912
-:1067E0003DE6052488F6E950D28E6521E9C072188D
-:1067F000E9C212C3CC03C155EA33F1FB6847C2E2D8
-:10680000E75A034FDB44CC3B7803E410DC4B2B9876
-:10681000C09E9C7F1DCCFFED240F8757D8F07B2BAB
-:1068200044FF7B180AD88313BCBDD983C4239DE9D8
-:10683000CE7BC9C57B6DDF4BC2F525FA1DB5853111
-:10684000F7DEB073E11A1CE69176CC237963E3039B
-:106850006F0FA1F0BF7F970BEDE4C11B1B17823CAC
-:10686000BF9F74A4C339E1C1FC1E11D266FCFDA612
-:10687000216D16E3EF08C7FC5ECF1CB88704CFEF8D
-:10688000199F6BE770F11EC838F918B1E778FF9AC5
-:1068900014FFDE175218FFF75062CFF1EE6A17317E
-:1068A0003FEA01C8BBD2ED2F866CABB118E94BF9BA
-:1068B000B73CB3AE2EF8983FC265F76F177A7EE704
-:1068C000FF020F2194E60080000000001F8B0800EB
-:1068D00000000000000BDD7D0B7854D5B5F03E3391
-:1068E000679E99849964924CDE131E2128E004432C
-:1068F0008C68EB49881811EDF0A845DBE20404022E
-:10690000249940D1E22D2D131220206AD08840090D
-:106910000EF828D64727BDA888813B20225AED0DC6
-:10692000D5B6D45A3A20554484F145B9BDF57AD745
-:106930005A7BEFCC83A460AFDFBDFFF7A79F3DEC90
-:10694000B3DF6BAFF75AFBCCE50E85B14CC69E5654
-:1069500094DBBC2319FB12FFAE893D6FB1EB181B12
-:10696000CBE0AF8D4D2C67ACB541B5AF81526BD04C
-:10697000AAE99DF0B4EB824A316379A9D5E6F950D2
-:10698000660E9D7D989BB109FAAB0FBAA1BDB151BE
-:10699000BDDC04E5FDDBE6F71AB0BF4B6526983297
-:1069A000CF01E34299E5E882C3A0DC66FFA5631648
-:1069B000CC5F6283F7304E819D05DD30EEDEAD7732
-:1069C000EAB0DCDACC5836CEA3F87ADDD44F658F46
-:1069D000E1B29836A92C8BB122FC27CCA3B2B51F0B
-:1069E000EBD318AB693C6E89D8E07DA46E121BCD49
-:1069F0005895BD98F6A9BE73FD0758DEB2E498C35A
-:106A000007F3BDBA75E56F26C0788620AC0B8628E3
-:106A1000FDA2F5ED09305F74AB916D633138142E32
-:106A2000558F45CC3421FB12FECB5F9C5836322863
-:106A3000978A7231AE23AE1ECA978BF9199BCEC2CC
-:106A400059582FD6EBD418837532BBCDF9DEA58CFF
-:106A50005D6357D8978363E5B1A2BCDDD0516D85E6
-:106A6000756EFF93E26981EA7D5BE714E1FECEBEBD
-:106A7000E02BB2C33E9698D346B341E79F9FC1EE49
-:106A800016E717B0E85CF80C5B982BD67EC4A3CD54
-:106A9000261F8CD3B68C798E0F63CC1CDC6FBD1493
-:106AA000CFF1A0C10345B64261D34350AFDA981687
-:106AB00082792E17F892FC5CB1CCFDABA186D8BCD4
-:106AC0002BBE983A1DCF379A6AD5B629E7AF4BF659
-:106AD00053EDEE009EAF219F7952603E83B337D7CE
-:106AE0000EFD2E7DDEE8B101C826FC62E4A008CCD4
-:106AF0007BE94BB730772A8717AE575D62F41CCF1E
-:106B000060CCB4C4E9512FC77636C2C74F6CC6A05B
-:106B100009E1BFE4EE0EAC6FDD5AE172C7E1F5CAE0
-:106B200065768F0AEBDCBCCCEC5161832BC5FE9201
-:106B3000D757E0D07983D0CFA8633EAC5F04E7801D
-:106B4000705C644FA1E74251EE52035370FD5D80CB
-:106B50003F2D88AF8B39FE2ECA310711CF17BD3AB2
-:106B6000249BF54357F2F9F832976728AC63F3E2B8
-:106B7000992E065DAB16EEB75C07FB5F946AB623F1
-:106B80003EEAD34A1EBA1AF1FD350343BA6A4DAD47
-:106B900070CF8A1B4F9F56E94278E875815C666723
-:106BA0006C957D46AD9A83F812D8C43C8CDDD771C4
-:106BB0002D2FA7067215A87FA8E37A5ECE0C6C5223
-:106BC000A0FEE18E1B79B92090AB83F2CF3A26F379
-:106BD000F2B0C0262CFFA2E3DBBC3C0AD690CBD897
-:106BE000F31DB7D40660FE568367BA07E67D06D666
-:106BF0003F12D61F12CF17ECFC5C65FD2FF13DC094
-:106C00007B877826D73F27FAED1CA07E97A8EF193F
-:106C100060FC3DA25F7880FEFB44BFFD03F43F2093
-:106C2000FA1D1CA0FE3551FFFA00E3FF5AF4EB1DDC
-:106C3000A0FF6F44BFB706E8FF3BD1EFF000F56F50
-:106C40008BFA7792C63F22DA47C4FBFCD4F6B7032F
-:106C50008077F9C0B7F0AF34B53D1DF16E7373396D
-:106C6000E17FEB58C0F391317CCF579817CBA31D30
-:106C70002A8D371AF9313CDF14E3572D1C7A1FE2B5
-:106C8000DDA237F41EC4C356C573D807E30716EA5E
-:106C90003CC87717BDAAE778BE500DB238FA7E33EC
-:106CA00069FD5BC4FADAC47A7F651F4C7453B4C4BF
-:106CB000E59924F925D2BD3DB16C067AD260FE3645
-:106CC00027972FA50BABCDC3517E807C41BEB9C2A7
-:106CD000660C9B60FE157695EADB9CD576AC0FD8EA
-:106CE00055923F2B9CD5E659C8576DC0EC2A603EA3
-:106CF0003B1FBBCDAED606917F386AA87EC22F2639
-:106D0000D9918FB6B1A8A30AF7B714E40AF4DFDB70
-:106D10005C4DEF8B1C9F39903F1F4AE7FBDA9F7A4F
-:106D2000C0520CEDD43B74242F4AEC2AC9B1C14B9C
-:106D300075413734D96F5FA4C3F2236D5C5EC15FC8
-:106D40006A19CC3F944FCFB6DF59F15A29CAB37BA9
-:106D5000548FDBCDDFA971F26028CAAB349C373D7C
-:106D6000415E7595330DC70DB8CCC1C760DCA12A53
-:106D70007365A4C7E05EE4D073F9A29FE441B9361D
-:106D8000A423513E15B7C7C92786F232513E25CB01
-:106D9000AB8266E08F71FD4D2E7B42D9E24825F92A
-:106DA000043CC6F3254CBDA87BD1755616E3D7C964
-:106DB000F2A855C807C9775BBFB83C413E48BE9CA6
-:106DC0002C1F2ECC5FDFBC7E38E121702BF785F9BC
-:106DD000EC9B8807807F069F42F283A93E9737F598
-:106DE000C2F03218BC76BBEDC2703364BE457A8502
-:106DF000C1A7D2F8E7C9950BC055B6339A1FE93A37
-:106E00000E72EDB3777E58CA806456026CE8FC338C
-:106E100075C1C760DFF94B9EECC2F1F30E58DB1071
-:106E2000CE46D7ACAE36DC4FC7438C013EE9CD1C15
-:106E30009F8C39D576ECAFEA3457FA10283FF1BB76
-:106E40005B15C0277D46B387C1B91D7CE6B5F41B31
-:106E5000107E6F1888CE4D3AAF9D0DA1E510BEADE6
-:106E60002AB06E5D4378EC33239CF2B79B490EB099
-:106E7000C0A3AB3540EA56380E360EEBA7AFD6604E
-:106E8000DFDB95BEF2F5580E058DBC3DB068FCBF4A
-:106E90006E9D22EA99A6BA48EF14F5BFACADB91AB7
-:106EA000DAABF64B55903B8BD63DDB6E28C07A9D16
-:106EB000ECAFB14AD82FCE27CA2A9CCF93FB457D91
-:106EC000E0A5F61A20A26EA39C9F05B07DB74EC721
-:106ED000CB819E761CFFE96AD13FF0F86A2D9FD6E0
-:106EE0007383DE0145C72BEDB62B63EB5D97FE4642
-:106EF0007B0BECEF2377240DB6C11AB71ECF42F9F6
-:106F0000BC6A7AB317E18688EF05993848EF263CCA
-:106F1000ED3BB71D930379507BE6C0DFD246429527
-:106F20005F1F399002F06BDCD96C36407F93C11B38
-:106F3000C82B8EF56BDC5147FA8CBFA78C9EFDF4F5
-:106F40003BA80EFEA7FA998D1731DF47E1DF343DEC
-:106F500005558DFAE6769B9EDA337EFEFDEF4FF601
-:106F6000FFE8A9DFDC8CF39D7647B22642EB556142
-:106F7000804B3FFD64FBA69D93E9793845BBCF016B
-:106F8000EFE702EF227EA5367BB07DC8DC61F7001B
-:106F9000A02D860E2FCA0D007D5057197BDEEF18ED
-:106FA0004AED93DF27D357C8CC3226211F6F5049B3
-:106FB0004E85CC8194D1505E0B76480B2C6979D9E3
-:106FC000EFC68CC4F2B3368676496BC37ED748A42D
-:106FD0002B8F91A1BEBBF6CA500ED2795BA371FA7A
-:106FE000A388BFE145AED971FAD6BA7403AD63F593
-:106FF000CB407797C1D3107228D87F18C80D05F9F8
-:10700000A2CF8C768E25279D058AB19D6D2DD2E766
-:107010006A83AFB61ADBE5E848BE58864DABAD864D
-:1070200075B832758A9ED65173780ECA37BB112552
-:10703000283B923E7327C2E949D5D38C74F8A4CD7E
-:10704000660F4005F0480DF99F3ACC19C4B249CFFC
-:107050009A518EE795813C8FD3638F08FE79C46186
-:10706000247EB7D6129A5C05E35817E9EC01986FB5
-:1070700075E3FADE0930CF4F1B9F3BD402EFD76494
-:10708000A90CD76173AA6123C81FC38DB04658F7F6
-:10709000D32D5E3BF2D768A6CAB641BD75A891B99B
-:1070A000E3F8956D2494E3F8648653D52CD0FFEF74
-:1070B000E9BE7F77C0BC97BFF19619FBBBC6EA74E7
-:1070C000483621959F735A79E238F6AB13C749AF1A
-:1070D00049AC774E4AACCF9A9658EFFA5E6239F7D0
-:1070E000F6C4F274896FC0736C208FADBC8A5923CB
-:1070F0001F2F43790BF0F903C2DF5AA2F3207C2C37
-:107100008D8F9E9803F579C84FD01E1ACD48EEEEAC
-:107110002BFC1737EA05A6F466B763E4F9F0C82B31
-:1071200030DF80E7651BAADA19B4B7BDF3C11738A1
-:10713000BE8DC5B52B46F8685147262FBB603DA9CB
-:10714000F80F37C2BBF9CF3F46B97848EF4178E72F
-:1071500035AA34FF3DD3DC413DD7275CA8CFA489B5
-:10716000F669E6B5BD7AE0E769EFAC5E88766F3226
-:107170005CB358B3827409F8C1EDED3A46F26395F9
-:107180008ED523DEA08D80E3917A04FC626A86911D
-:10719000E0644A5784DDA8EAB03E4BE84FC69CDB6A
-:1071A0002D48C72B0E70FC5F61E4E3F48DE7A64920
-:1071B00011E519F2C98C745DC238EBEDA28D286718
-:1071C0003A78B97B7FFA0D4897EBA7A58F413C3100
-:1071D000A1DD05E30DCA376B23607F96578D01054E
-:1071E000061DA4B2FD0638CB6E2BBBCD0BEBD878B9
-:1071F000D01AD0C37BCBECFBEDA8A7958B75772F6E
-:10720000F7BC897C205AA7121C2D991DF63123F951
-:107210001E02B03E4407948B55C33A49CFB3547510
-:10722000907CB7947574209C364ED291BE917EBBF3
-:107230008EF0D952103A3414FD04B375761C2F1D0C
-:1072400004BF11067920BFC38B7E130630D755705B
-:1072500054C1716987304F8680ABD3B9E3870A8CFC
-:107260009381E38DE6ED114E0E01A7ABD3DD0477DC
-:10727000A718376328B41FCDC769AB888D23CF719A
-:10728000632D0BE2FAE4BC729CBEF199A6205F3537
-:10729000FC0AE006E7A4149A69712BE633B28FBBAF
-:1072A000977B9BB7125DDBC8CF91EBCCAF463CCA56
-:1072B0003DB8698A6E34F6B3D23C86D92C88789C66
-:1072C000AB32F337D351BFF1121C93E935677FC757
-:1072D00054D453E5B924D36F8ECADAF5E9E7D371F4
-:1072E0008ED3595D32BA1F7A4EA2979C83D13B1040
-:1072F000E993E97A4BCAE932840B8B6FAFBF7059BF
-:10730000AF0F1D423F0FCB063901A02F4C9A8FB112
-:10731000FF326159613AF7974390EF3B84FF06E4EF
-:1073200015106BF718FB781BD2E94246F855FDFCA7
-:10733000DA5B7F05E39D1D66B4A35C2938D8D18B49
-:10734000F291EDF40DC773D8ACFA1E4E81FACD87D9
-:10735000B319F2EDD5166E8FA902CF93E5CB3A4162
-:10736000376E9473AE7FFE29F5C3D0D0AC4BED40A1
-:107370007BEBEEAF7DD59CF9BFA867B1A749CFCA1B
-:10738000DFDFDB62C3F9D71D6C37037C2D6FF0F6AE
-:107390001D500EA808BF06F267ED2B98437052DF10
-:1073A0003631C4D3517A2D8865F6470B43FEBBFDB9
-:1073B000D9EFD5BB91FF644D74231FDA26E83D2831
-:1073C000ECB3E4FDAB46CD87FA44F2FB4DE93A71EC
-:1073D0009EDE1375708EA31E31B2355059AA9BD90B
-:1073E0008EF65D7435F05FA89DA97737DD1D67DFE8
-:1073F000DE6BAD0AA5A35DB2CCCC7CA030E79F5379
-:10740000980F88B3C0F99B2AE43F852CACA09C2D33
-:107410006C068517F16AB195F9E2F03DFF9C4AEDE3
-:10742000EFB56AA1F4B1FCBD19F88081FF933D99D5
-:10743000EE65754ECEA3507F313C653D8A7C833925
-:107440006BB43E7B6430E22FC87D986FB7D8B7012C
-:1074500060681803FFD97461D3E8F3DBEF1370524F
-:10746000CDB630F24BD5F6FA61E22F76F5547C3B7F
-:10747000B4BB89893530F2CB225CA8FC033B95F381
-:1074800080FF9AC690DE1F40FB3B90C6ED11A669B7
-:107490006E6716D20B2320E79B59BB19DA11B6038E
-:1074A000BDE5B05E0BE9CDFB991BE9013D6CEFA595
-:1074B00010CB6208D7CD8CD5C6D3817C4ABF84BAA5
-:1074C000444FF6D4A52F59683D866616B4A03E8475
-:1074D0006B0378AB8B59502D8EF905473BDCD4CF2D
-:1074E000C89A499F7DFA8B23B9C8A7AD07401FBB37
-:1074F0000CCF59477CCA6A4DA43FC65A084E5181E9
-:107500001F5DCBEC74CE7DF69BEF2D71CE91169462
-:1075100017858BD313CE57B6CB3F97C77C97C78FB2
-:107520001BA471F387EE57D02F937FAE90EABB96E2
-:10753000B92F30FEE001C6CF213C1A78FC7CAAEFBF
-:107540000ABFE5B80940B139BADFE175C7F4EB64A9
-:1075500038E72F4EE4CB97ED4C2C4BB8580C9A7370
-:1075600032C0DC7287CEB315C6BBE27062BBDAE212
-:10757000DF92FD1B6B1F764EC5F6609F6F85B75778
-:107580009D486CEFAD7AD981741C6BCFD777CDB99C
-:10759000C476C9E793BC5E5857E6B7E3D635DE6CD0
-:1075A0004AA89F5E77DEBA32BF13B7AEEB5C89EDB7
-:1075B0007D2DFDAFEB8652D33F5C976CF7ADCA8B48
-:1075C0006B97BC8FA9B5A601E0CEDB7F67FAC58DAE
-:1075D000FBDDFA7FDCEEB625C9F30408DF17E9B45A
-:1075E000F119503F135FA1BE68B392DE7B9E9D25CB
-:1075F000E4D344543CA09F274D9B88FD6A25DD09B8
-:107600003FC3C1672EC946BE9E27FCE84CF815BA99
-:107610001B5CE457F089F6204FDA905F746F877E29
-:10762000697C5DF1FA534603B72BEC2C4AF42CF538
-:10763000A5746657B83DCEF59D81E6491EFF1E54E0
-:107640000061BDB3968C67EF021D3E67B457A96811
-:107650009F6D51481F9855A3E953013FC6B52BE4D0
-:10766000579A75D79B0FA03FE6CAE3EE9D11783F6E
-:107670002BE8F0E0B44DBD4CC33841B67E61D98FE4
-:10768000E1F9E03E4671342C2F447CB3696EB43787
-:10769000EA704530CE294373991DF9E6F76D1AF269
-:1076A000CDBA69DA1F68BF7F07AD04DACDE65B6744
-:1076B000CF774E3662BCA3EE7BEE4AD47BEA42160D
-:1076C0008D9E66A65A611F75A08FE133DBC8540BEF
-:1076D0003EADCC8CCF8AE55CFF4AABF41AEB60FE82
-:1076E000BA9E9F7D8EFDE6AAE1BD5C9F0CD2BEEBEB
-:1076F0007A5EFD0FD4D7666B5E23F28B4BB71BB956
-:107700004E2AF0615428B18CFC20BE5C164E2C5FD2
-:107710007E30B1FC710687EF38E1C7DAB7DB447C15
-:107720007BC18756D23F7781C0433B39F0B489E4AF
-:10773000C7F805363AAF0F4F5AB7A25F6FEFDB5667
-:107740006A3FFF490B6FAF0B3D83E5C03329646788
-:107750002FC80855A4C3BA5FFC424FF0C66D19701C
-:10776000FC67466C5D83F597872A302EF6DC258C06
-:10777000F562BD1A1C8DFB7CEEBFB8DF3AFA842996
-:10778000B80DC6FDF0859F3DF3239CF789BC7405B9
-:10779000CEE72A940BD06EDC23662BDA1BE33E7C0B
-:1077A0006A08F28D05DB4D09FB7B264311FA833B0A
-:1077B0000DF16E20BFE3B1D53FA3FEA5270E13DE6A
-:1077C000ED32047418C70BACE678B6CBC2FDA4BB8F
-:1077D0002C85413CA7DD199CAEAED26DFB6913EA46
-:1077E000976F703D64A0F14B5DB3BA6AFAF133F65E
-:1077F000D5C3BCC570CE673EB0DE86FEB8E11B12B5
-:10780000CF694430B1FC7206D71366B2B8F7C5B879
-:107810009EC12B5DB89EAD8CD6537AE29D5B8B5199
-:107820001F37713D2479DE5F6770F9F9F39FC33824
-:107830009CCFE8B91E0E1003BA5E20E8E14585EB47
-:10784000C1F0B7380FF07F012A108363EF1724AD22
-:10785000438EDF22E0F4A9396D1BCA73A791E3FDC3
-:10786000C965071FC038A66CF7DE324DAB89F32B14
-:10787000CFD9B0F0400E9C7F437726D999F27DC3D3
-:10788000132F657D17DE9FDAAE7A50F56DB8E5F1FE
-:107890007BC761BB27F4215C27D66B30FEA9D0CB18
-:1078A00069D86ECE66C718F497C8FE73375CABD53F
-:1078B000C4F1D3AF4A4F92FE1B847DFC7C65EF84FC
-:1078C0003C80F7820D8A079B2D087D7BEA8DA8EB13
-:1078D0006CD67B30BE51A132AF7E0C99EED3F0D97D
-:1078E000D0FDEC815CA8F7EF1E5B81FB5AA3F3DEB1
-:1078F000300AE9658B81FC60C9E7637472FC85FE20
-:10790000611DF45F73B3AD1EE32230EE7E2CEF2BCE
-:10791000DDA6473F7EDA09E06FFCFD611DF0CC1368
-:107920003D2B4683CD02786C6B47FAD8858E0B9C35
-:10793000E7693DC90916E6FB1827FCCF0BFED469A1
-:1079400054E179E2C4F2B42A4E7F744EC8D49DB09B
-:10795000BFFA474611BDCEDD90485FB29D5CEFBCDB
-:1079600060627D325E9438A5BF8295C6E35772BBD4
-:107970008C490123D263C312E0E77174D370BCC396
-:10798000887A57F23CA8413279AE7AC24BE6A6FD1E
-:107990005AF87E41E535C37E4FE2BFB8DF5C41BB9C
-:1079A0007EBE425B640B2E61356E80E78229AC1689
-:1079B0009F921F9EAA0C8DC6F6BB0C91C77F4A7C76
-:1079C0003095F8C1297B380DFD4AB9C2AF77CA1D81
-:1079D0004E433E7746C4EDB01ECBF37B401E005DA8
-:1079E0007FF89191E4424BE8A5343CAF53CF5874F3
-:1079F0003A38970FBB33AAD11F742AF4AB34DCD7C3
-:107A0000C9504635FAF506E213C9FC4DEA0347F1C1
-:107A10009F5782DEE3D4263811BE1864C8017993DB
-:107A2000D15CD6DC0FDDCB7E4E637319E66944BFB3
-:107A30006FF3209F9DEA74D3FB3A858F877F18DF11
-:107A4000FBE460C6363CFF837B4B06A19EF00973C6
-:107A50000F42BEBD20CB7B33CEE7AAEEA5B8BE6BEE
-:107A600022F3B4429F77F59E3BED00B7DB19C82D9A
-:107A70007C96FB8CE46F69CBA475CD525958053CBC
-:107A80009D8572753495498F99B55909B6C23A6E7C
-:107A90005F9BB8CF399DA6D8F9C27FF31830442434
-:107AA000A0CD71ED60FC79283F017EF3CD2C9C02C6
-:107AB000E3CE7F34B1DF0216A6F5343CF5A5A93F2D
-:107AC000387E2EE0B8204BF33BA1AC4C31D3BA7ECC
-:107AD000F0B442F2CD29FC8CD1070705311EB64027
-:107AE000C8EBD9A6BDB41EFF5D75DAED8037679689
-:107AF000CCD26ECFE0292364976D50080F17D4B015
-:107B00007001AC6F418F121E85FAC45BFC9CE4B817
-:107B10006C0B6F77ABD07766035C507F18F79412CD
-:107B20004805FE39DB0CA61CF211B13FAC1F04E581
-:107B30007AD641FB6A64115AC75A3C47EECFA3F587
-:107B40007FFE163FBF71F55BF5B8A8837B2B28FE3F
-:107B5000F729F3D039825EC22CE9E7E309C25D8BD5
-:107B60008353FDE6C4327B34AE3C18E10AE5387835
-:107B700037EDF8D2A4F503E707FBE44970C4E451FC
-:107B8000EC3CBDF788388707BF3D2707F9C07DA8C3
-:107B9000BFE68A012A916F32E9D7089B617CEBE549
-:107BA0002CC1CF01FA15959F704E9BB8219FB1F55E
-:107BB000061FC50B66E9BD0730B49592ED7B1AF13F
-:107BC00076964E2B54891F682564EF2EE1E7F1D09D
-:107BD00098E611CDFDD8B972FDEB95505887FCE0C1
-:107BE00005AE1FA496470DBE383A7B45F0B941FB60
-:107BF0002207F2105F9E55C82FBF51616D0AC0D990
-:107C000005C782F260A372F400CA8F8DD7BB592BCF
-:107C1000D497EF98BCF065B295AD94D7D3B8A34A8A
-:107C2000DF68A3FD737D35A579AB0EEAB36F2B1D1D
-:107C3000837402FBBE6D0ABC7F5DD06D8E8DE383C5
-:107C40006B79A07811FA65F77917BE8CF43DCA4AB2
-:107C5000FEAF6C80556A3A3DDB510F75B11605DBFE
-:107C6000ADCC5478DE411D9BFECB918435EAA074E7
-:107C7000FE3C0C4F45656DE8CFCD5641AFE5EFDBDF
-:107C8000709E07D3F8BA3275FADB26A35E3D86975D
-:107C9000D3972ADA3642FE75B4AE6C13ABC57DE3DA
-:107CA0007BD4C361195A37D507094ED9E39BCB70F2
-:107CB0001DD943F8D3690CE7E338AFF7E1894F8763
-:107CC000FC7AB190BB8BB75667237F7DFD945945F5
-:107CD0003EFABA4BEA8F611BEA8F6C68296F2FE47A
-:107CE000DBE2B2F1D988F7CEC2C476670CDAA0CB5A
-:107CF000514E1CD253BCE7339B36C801EDAE32B2B5
-:107D00007EF3ECBE10E7EA3FA7B0609CDFC03FFD0A
-:107D10002CE9E7FE736AC2FB53CBCC2C18E737681B
-:107D2000A8DF3701DB35B2DE95888F8DA114168C64
-:107D3000A38FABACFDCF2BE9C27F4ECF02FDCE6B44
-:107D40004C7C7F2E830532FA6B9795F81EF6915086
-:107D5000DEF9D7BE7DE07B561949433FEA2494877C
-:107D6000503E13D4050CC0875E37703977DA1E4950
-:107D70009083A7DD112E07D14F64E37AFA643C6744
-:107D8000359A362535368FACC7FEE971FB3D3DDDB2
-:107D9000C8C2743E515A07C22F309CB14D3D1F1BC3
-:107DA000313FA6A1672FC14FE24D3C1C03F171A7E3
-:107DB000D6DEB00E784665E64FD78C1C0128B84F4A
-:107DC000F287AE35E8E7CCD2EB12F8454A791FFFCF
-:107DD0002076F52046C188DF6C59837ED25899B74A
-:107DE0008FF57F78620D8C573E92F7AFCE0CBEB602
-:107DF0009C92443A38FF55A385DED4B8B239A96CB9
-:107E000083F2A8B8B23DA9DE9954EF4A2AE7F3F607
-:107E1000A752C3857A0F6337663E3A5105BE792A69
-:107E2000273C03F3C6D6B63E3EB106F859633997F0
-:107E3000CF4D3D8A877C7F027E4D1EAE37DA3C11E6
-:107E400023E6ABA594F71E40FED2B053B12B400FF2
-:107E5000B6507798CAD8CF1DD72FA450BF86D0511F
-:107E6000EA37E0F8A53AA2F735A5C778BBD0FBA45E
-:107E700007AC6A5B48F179197FD6339F96A7C4E2B5
-:107E8000CF92CF9ECED15E223EBB5BB1237DF6E189
-:107E9000298E1BE7F791EDFF38AAE7B7A866A42C57
-:107EA000FEB805F5D93F35BE3F16F5BB3F0A79B29E
-:107EB0005E098EC0793731DF089497DF6F1CB657A3
-:107EC00007ED8E18225D18635B9BD93311F3E88EA2
-:107ED000A4460A300FEFDE070F103C8F6446BA103D
-:107EE0009EC71F7C85D717440A30EFEEFECC4F7833
-:107EF0007958A40BCBBB1EFC132F8F8A14E8A1FF6B
-:107F0000E0C0918935D0FF317BFF74DD9AC9F57BE4
-:107F1000B9BE2B866A3FC9447BB581CBA12EB089FF
-:107F2000CCC03767CC3FF9F463008719FF9242FC5D
-:107F3000ECB153532772FD3CE0552BD07FCBFF486B
-:107F40004E12BF57C96ECE41D9981E3B8FD4C25E28
-:107F500037C9914B9ABB51DFC89E3192E4488D538B
-:107F6000FB0BCE2B9FF7E7C113DAFF25D3CEF9B772
-:107F70005E47F1ECEC1FA5927E769F85EF07E886C1
-:107F8000CED726CE6383D8CF864C6E57363AAFA570
-:107F9000716E15FA74E7EAE0131680FFDB324F6664
-:107FA0001DD7CFBFBB15F80AF0F14E879683FCE4CE
-:107FB000BB22EF4DF20F7C9F1E6797749641D91636
-:107FC000B33F3B276B3956273EB37418B791FCA8D3
-:107FD000B398F7937229BB95CF9B7DDF886DB88FDF
-:107FE0001495FB9F664F2FD9D6427AC1145A2FD3CE
-:107FF000B41C05C63B3E6FB00EFD52F27CA60FD5F9
-:108000007E89F0B955F8F5E539C9F3FC8BD8F72C22
-:108010003DE815B0CF77B37C341EE819A385FF8BFC
-:10802000F48CBFE019C7C197A991B1F8FEFF2338BE
-:10803000FDFEEB8053E312E017BA8BE017027EEBF4
-:1080400095B0219BF30BB2A7F13DCA9D5F3A7D1F0E
-:1080500066C6E5C7CCF85123E995725D293F7CBE21
-:10806000F63BEC7C3A4BD6FB3EC7F38AD34F3DD26E
-:108070008F29E639F2B699E216478C21E29B47C078
-:108080001E6A41FE22E2EE15FFB2E075B407E5B8C4
-:10809000DFCDD2737FB03C77C5DB3DA718F35058D6
-:1080A000C08CFB986CA4739772B7D3C1F34A3AEFB4
-:1080B000CAA3BC92332CC2C81F5AC9883F021E50A3
-:1080C0007DF4962CA27F681FB060FB7997507BC02F
-:1080D0008B00F1875BAC64BF74629C1AEB6F290D57
-:1080E000621E0CDACD846FF374346F3FF8C2FDCD9D
-:1080F000C3799E85C49BAC56EED761AA367A729C32
-:108100009CBF228B9F734A79E4D9DFA35EBBD64222
-:108110007A2DCA588A097564D33870FEEE2CEE1792
-:10812000203CBBFDDE5491CFE6A940B8AE4AE578CD
-:10813000B9D9C2E3559B418F26BE28F057E6D3F943
-:1081400084BE17A9D7A5A1BE303AABCFDFA0A1FD51
-:108150004FFE72A89F19518EA2DD3633A00F9BD01F
-:108160000E6BBF568BC4D931F887F1BEDB045F6557
-:108170001B18F90F6FC37E6938BE350DE39BB761DD
-:108180007FF4D72EBD36218EA76571FA96EB4BE6AC
-:10819000FB5A96F04B763CA4C5CF23C74F1E0FEC7D
-:1081A000D12A840FC0393C08CFB7454FE797BCCEE2
-:1081B000C806EEF78E6C2822BC93E30DB4CE3FEBDD
-:1081C000A377282007E78CE776BAB47F660B3B9A43
-:1081D0002D4DB4EFD0CFD257D69F5F4EB617313E5C
-:1081E0009FD89EEB2D2923A346A25BB792B07E09B0
-:1081F000AF81E030F72BC24DCABD872C4007E9683C
-:10820000862B84BF1BEE4A2139E6340647205E2DBB
-:10821000CA7253BB4D9827437295DBCD9FBE2EFD8E
-:108220001E89F6B2DF1ADD82F0F25B19D1D3E9DDE7
-:10823000A9443F6C686406E6999DD9656288BF4D84
-:108240004AA404F9D66945ABA3762D296EA423E987
-:108250005778F739EE57F02324617DFEC07F529E98
-:10826000937F67A21D7D1AFEAB07BC3FAD8B54E028
-:1082700078921F801EAD917E54CFE33F4D3A164059
-:108280003BEB2ADDCC799CCE73D9367A7FB464512E
-:108290009C9E0EEDF62BE91C7D906E1A041C9B74BF
-:1082A000C7A85D03E62B213CD1DE423F1956C6F933
-:1082B000759BD67E48F9524D3B12CFBB21860FCA23
-:1082C000970AF68BC30FA2E780E0078CFB3B6A7826
-:1082D000FC3A5594536A7B297FCA2FFC1F99FB22D5
-:1082E0001390AFA49687D84C78FA4F707D635CCF1B
-:1082F000D697D0AE76D4F6162019F8859F509EB743
-:108300005CE7953DEBC8DF21F59438BB73C494045A
-:10831000BFC372EA87762CCE17C1573988065CBE78
-:10832000AD17F22D050D6294831DC3490EA29C4228
-:10833000FE24ED60E457C82752B2ABF720BD3E9251
-:108340005DFD02E76B8067A8D7A35175E5C0FE3DD0
-:10835000091FD90EEDE17FE4BF7B55E0ADF4ABD34F
-:108360008ACA31DF3A53FAEB28AEB748716723DE89
-:10837000BEA7F7915F6E2E0B909F681EFAC3E0D9DF
-:1083800020E87D8EF02FCD117E25F4F7C6C71FD1D2
-:10839000EF1A5F9ECF7A39DFD86E8AE5E5A01FA875
-:1083A00086855361BC46F453E13394D8AF8945A91F
-:1083B0009F7FE797A684F86627DFF76DE2FC1D35FF
-:1083C000413DF2898D16EE9F92FC63DC52EEC71A96
-:1083D00034462B5E8178FEAA81FC1B7F11E7D6E72D
-:1083E0002FCDAA7E290BE064D5F37B6CD11526E254
-:1083F0009BC7411E770BBFCA14B44397310DF3DE00
-:10840000996A2F8CB753E573CD2E4B3DE2CF67426F
-:108410009EC9F7DBB30CB41EF237115F4E21B90BC6
-:10842000EC6334E257C5602917D968F4731D1576DB
-:1084300073D3CD361F8E17D1717EA3647339A564B3
-:10844000F3BC3E59EEB3F304FEC8B821FA7DE2FD59
-:10845000EEE6BEF6EB843EC968BFEBE789BCF03EB2
-:108460003CD6115F4A19E925FE7B95AE9AF852F485
-:10847000039B1BE152FB61C33CDCC727D3AD74FFF8
-:10848000EF76E10776653B687CE9F7BD503CAD7659
-:10849000CD08E297B27D1E1A2863CFF71FEF127C3A
-:1084A0006C17E3EB0D9CB0F23C15950590AFED0A0F
-:1084B0008D08E27AEB84FF01F51BE4AFD167F9394F
-:1084C0003295EB43BB7A460511DF8F1A7C1B67A3FD
-:1084D0003FA7DB407E39A6069F781CC7D993E3C12E
-:1084E000BCA1D3BAE8965F43BB5D277E9E8771A28D
-:1084F0005DC25FDF600C9790DE2CF2241BD2C22598
-:10850000E8077A519C578315CAF03EC3E22BCF1E71
-:108510001B8BA7613F7C7F2CC8F5F2638CE3416025
-:108520002D8F97027C7366E37A5767533C0ECF0515
-:10853000CFE1DDDDA3685FEB0DA2FD0B0AB557A609
-:1085400094CE20B9B0C69481F03FE335529EAFFF80
-:108550003EAE37CED2B9B72C415EB92785F637BBD0
-:10856000F310C549FCF7CEA5FB93FEF94B6F62FFF4
-:10857000207E807225DEEF7D9A450BC91EAE1F1C42
-:108580000AC33A4EF78CF0F0F01FBF8FD324F249A4
-:108590008F1B9886EB8EEE3604FBBB2738D0F8E4B1
-:1085A00040ACE0F28DFCE3F1711A920789719B0BEC
-:1085B000954F1B222577C1FC6B337C73B2E3F445E6
-:1085C000FF9E1CE277EFDEF3D742D22B3A789CE194
-:1085D000B8419B8174E2A8091B67C6E9613FC916CF
-:1085E000F68749E88FC007E3E95ED6575427D2994A
-:1085F0007CFE389BEB21A922AFE0FC7A99B736D5F7
-:1086000084F293BB96705C37BD2F12F1BA7127A22A
-:108610007B313FAB215446F1C0A2A561A24B8077CC
-:1086200018F5FFE31B53393F816DE238732A19E9CE
-:10863000AF73F43C4F628E09F4612EC7A9FD7B1B1A
-:10864000B3090E15CBB91E187D5621BE28E39675C9
-:108650008CF77FBEED68400FEDEBB62B65C05A5925
-:108660005D5B15E551CCDF5C4CE73F4EF0DF5926F2
-:10867000AD6423E2DBF33CEE05F391DEDD80B9620D
-:1086800063882F19511ED66F5718DE3796FB4F8E11
-:1086900013B260629C665C88F36F941B2C4E5F93F0
-:1086A0007208E5054BD22313F12220E257FC7C7EB1
-:1086B0002EE02AF93F41EC1FC841D0A79F44FCA9F6
-:1086C000A8E6F417ED5608CE8DAC99C795841CEA40
-:1086D0005B8F9063EFE9B9DC9C635A47CF305E1E35
-:1086E0001B8B7230C2E520C835E48B03E14578006E
-:1086F000BC90F8B017F701E3359C60E16FC07C0DCA
-:108700004B59B871347FA68E26B9CCE5B399CB67A7
-:108710007C5A2F424E27CBE764799C2C87510CA1C1
-:10872000BC957810EFA7477D64DCD2A09EFB61F377
-:10873000ED981F28CFA5D1A91DCE1B1BD3B7FC8751
-:10874000CD66F76558F6B2C136F42F55DD5E00FBF5
-:10875000F7ABFC9E720AC0692BBCEF12FAF9E40277
-:10876000BE7F97C80332A85E5666C373EA257B3A7C
-:108770009AC928AF5BC2B72B15FA8DC17E5CFEF596
-:10878000F537B3366B5CFFEA5D16922F675F48A53D
-:10879000FB684CF5153960BCAC3F829E0EE5D3BB3F
-:1087A0005249BE9F16FCDE29FD166C259DD76778C1
-:1087B000CE998875D579E8FF65CAC43C46F7B4B947
-:1087C000DED8E818C86F2FEA8B7B6FE6786622390F
-:1087D0007BD611B913CBB01ECA333E25CEDDBF63A5
-:1087E0007CD98F303FC06BF370A8FACA506F30E964
-:1087F00017DF6CD6E37DFDA5D1BB601F8D0536CAA2
-:108800005FAE297AE777B740F9831D06BAE738EFFC
-:10881000B1A983C2D84DD55CFDC9E7794143C2FDFA
-:10882000B905DB13CB8DA1C4B23FE9BEFC9277B68C
-:10883000BEB63FAE3ED395EAA4F377330FE65F337F
-:10884000FDF706F9FAE197F2F9D765C1D7F60FA35C
-:10885000FCB57C17CFCB31A25E3313F1A19F7E6FA5
-:108860000ABDC6646A3E8179F0A6174D74AFFE4416
-:10887000B66F18F66FD2450FE0799A8A4E8D463959
-:10888000585DF4778AA79DFD31F3207CCE5AAA4823
-:10889000BF39BBD1E246FBACB3D04678D0B947096B
-:1088A0002A5C7F9F34B602E3A7B407E6DF70FD07BA
-:1088B000FCD20633F37BF860BDB890CF68644FBD3F
-:1088C00037D96A5F0EFDEA377079DBC07AD3900F33
-:1088D000CC7771FEE3D73F6534C33F8BDBB4112DFA
-:1088E000B0DE055E2BDDD751BF50E99EFA2A1C325F
-:1088F0004EFFAF72093FA93962ACC2F9FFBEB8168C
-:108900005D63D2CF6532F834BC1766D85916CE8372
-:10891000577397BC44764E5F1C7A37E75B73EFDA88
-:108920004BEF9529B5B4DFF760BF089797369A6883
-:10893000BFEF15D8C8CE7CAF8BDBBF73EDC6A09957
-:10894000F48D7319789FF6BD2E03DD633F1F1ED78C
-:10895000D1BDD6F737BF427EB8F7199F37B0434F26
-:10896000FACAFBF6684518E1E86E4E437DB77EC350
-:108970003CBA173BB74BEF457E36B7EB8E5F5F894E
-:10898000FEA329B796E396AE712CCE72DB62F55248
-:108990004F55D32B1F473ABCE68BF1BDD7A0BED4B1
-:1089A000057452CCF3EE514FDFDF751DE9A5732737
-:1089B0005B1DB82FF7E6C726A0FC787F722EDDE39B
-:1089C0009DFBB4C2F0D30D731D4BB2F0FD5C45F5B9
-:1089D000F6874FCCC5FD6D5545364F18FBFD564FFC
-:1089E0007802747533CACFC62E03E9BDFBA7BCFD60
-:1089F000BB5B9C31BA52A66CB8691CB6FF9981DA90
-:108A0000F7E93B9B6F94F8C2C215685771B825D33C
-:108A100099A9686909AE2B99DEE62E6F2EE1F1ABBC
-:108A2000AF46776C33BFD7DBE652D897BAAF4477FF
-:108A300077BBC65E3CDDB1FCF4047BEA7CFE16200D
-:108A40003C95FE7FB387698FD928DEAB29C07F773D
-:108A5000B8F8BDF51D2E7EBF4DFD8F45DBDF00F85C
-:108A600054BA7C5DB88E22A695A1DC7447EDD5780A
-:108A700017C926F439B6D924ED00D2EFD767B2C7AB
-:108A8000D7C4F91F422E6E27011F781CC739FD87F6
-:108A9000BF1FC0736A2A3C351AFDBEFE739F51BCCE
-:108AA000D0D6C3E3CD364F94E2F006A797F050F24C
-:108AB00077BF87CB9FF3E0E5E2F73BFCCE288DF351
-:108AC000560EE7CF9D22BEB2698995FCA99B9C41B9
-:108AD0000BF72F0418CAA749957A1E2713FAD68DCB
-:108AE000C21F692E7F89617C8C5DCDF3C2DE287F39
-:108AF00049CD80F2AF2BAFF5D07DBEF247DA07E368
-:108B0000BEAF3688FA21F4BD8D7FD7AAA87E914BDF
-:108B1000EF46FA9E54CEF322597D1AF94DDE287F96
-:108B2000D7797BDCFABDCCECB601DE4C01628DCF8F
-:108B3000C3BBE96A8BDB16873F9F7428B55CEF7572
-:108B40000F9A368AFB45481E9727C26391CB48F39C
-:108B50003E925D7508E17CCD37F9799C7CDA14444E
-:108B60003E7852DC8F49865FC425F0471D9110B7CF
-:108B7000771A438528273F5412FBCD6FD753DC7CEF
-:108B80005EBBC28230DFC9279E2F447EFEC163CF09
-:108B900017CE8C5B4F723FF93C29E7137EC1643FCF
-:108BA000EF40FE5DD9EECC06E6330F89B53F53FFAB
-:108BB00037F2EFCEEC11FE614D1BEA447B48B44F17
-:108BC0001E2F3397F36B65A7427E0FE9DF3C76F0EB
-:108BD000118CA4F49D9FA5A758179FCF289FE3C48D
-:108BE000B94DC57383AD58DA7979A0F31A881E7F21
-:108BF00021E4903CB763ED4306211C8D4D3695F181
-:108C00007B6AA5A8AF7731AB07E9E9AF22AFD56999
-:108C10008527E869C65C970DF999FC2EC00FAD69F0
-:108C2000DBF0F95791F7EAB4C213C629C82DA5F1B4
-:108C3000FEAAF3925DF7437D07DD5F74093AC966CA
-:108C40006145C14F1D2C784EA1BCAFF6447867B585
-:108C5000723912AD3392FC9270BF6AE69D64BFF622
-:108C6000735E1B108F722BF9BBC939C5C2DF11A10E
-:108C70003882A592D9D1BE6FBD3240EB90E7E5E7CF
-:108C8000CD99D2A390FE8CF92F29E9142F0D8827B6
-:108C9000B3A5B3BEF8418AB0775952BC201BF46E1D
-:108CA0006C27D70965CAA3B9CF11EA28E1F156D2DA
-:108CB0004B715C7C3F73A44AFE766C671C7361FC4D
-:108CC000EBC35391973849BEAFB7F61B9F9884F713
-:108CD00083F01C403EA25EC83C8684FB419B419FC2
-:108CE000463B4DC67FF5BA50998BEC93DE08FA4FA0
-:108CF0008C156637CADB147DA814CF2F391E0CEDF6
-:108D00008A791E42BE03E58CBCFFD3B464BC17E372
-:108D100054A07F04CC787E93F9F935DD5545EF9565
-:108D200029A52D885FFEA58CBE5330BEA79BF2A45B
-:108D3000FCB55C1FF3EF3C6A6480BF33853F870955
-:108D4000FF739638D76342FF8EC5BB225B30EFBB03
-:108D5000735E3EDDF74DCE2BF9AAF1CE33A900901C
-:108D6000CBE2E25883CC5CCE88F397F42DE35AA98A
-:108D700023BDC5A889FF2E3BFA2BEBD8AF90371245
-:108D80003878CF3FCE1B997613E68D9851CB17F5E7
-:108D9000B80C90A37DF7F92C6E8A7BF5D5E3771894
-:108DA000CC3B15717F8FDD74ED50CA3715E5D7D6F2
-:108DB00062DEF87D1696305FFCFAD4A4F10D30BE69
-:108DC000CD2DDA074EDE70AD4AF15F513F712DE6D1
-:108DD000C9DC67481C8F5050DE3F34C7E6BB7DF3CB
-:108DE000867BD6E6C7E439C8F78D396363727DD5D3
-:108DF000DB933A2E73237D7D4AF9BB523EFB9D3CAB
-:108E00008F24998F3D9AA348BD78028ADC55D317E9
-:108E1000D2770BFAE2BF3D751AEAC332FEEB5FEA86
-:108E2000A53C5ED007B6E7903E70EABDBD0CF5CE1E
-:108E3000936417F8CFA9DC4F047A057E87C6DC530C
-:108E400045FE504C4F1D1677FEF3859C421D1EE9D2
-:108E5000C1BFF93B8FE9B13E57EBCEC98CD987C969
-:108E6000EB7D2D87E7B9FB4BAB37223F608F2AF4B0
-:108E70001DA835A59F90DED1F4C2B563E3F3D0E71A
-:108E8000ED7C90E7316F37F4BBFFD772F877629AC9
-:108E90005E7896FC9D2783FCFA4CBD1A5C8D7A683F
-:108EA0007DBD0E352F561EACBB85F481E9B00FD8C1
-:108EB000572887C3C7BF7D6A00F3E2FDF09F02AF6A
-:108EC0003679E7905DB069BAD986711C7FE9CC85A7
-:108ED00084FF76AB86FB4F5E672CCE6CA5FBCB6B1D
-:108EE000761A6A518FAA00BDE95F61BD05E9136B6F
-:108EF0003DC097F2F4DD653FB061DCBD7FB9ECCFDA
-:108F0000E3E7D8A67803DF2A273F278BCFE329DAC8
-:108F1000C9F5B3A339C604BFFAD11C95E07975A091
-:108F2000773CE2DC1E3592827AB29F691FA3FDCBAB
-:108F3000BC3637F977198FB33B97B9C9BF6B764603
-:108F4000EEBE8CF42895E2CCD2BE38FD02F78B4DF4
-:108F5000CDF59D46FCA8D0471EF816C2ED6E55F81B
-:108F600089399F299C6A1B837E2C8B33F240AD9BF1
-:108F7000F26FC82F31E81B6D740E7B9CCC8EF019FC
-:108F80001FA85395383923F9C6F8BEFB3B4EF29F14
-:108F90005673B6C686C169BD6726146DFB3223A61B
-:108FA000271CFCFB34155F4AFD4167F6919D533346
-:108FB0001DEC46C4BB95D1033AF4D73B7B497F6C8B
-:108FC0000C29344F63E92F293F6E81C8C3EACB8750
-:108FD0005223941F66CE4D117EA6368E97AC97EC29
-:108FE00062F614873FC84DCA1B8BE9F12DD44E8E13
-:108FF0006714718646E1C70140517D46AE22C65DC9
-:109000009E189F10F332D55D11EF77583F19240950
-:10901000ADCB9D86EBBDD7EACDCF85F6C7EA75040B
-:10902000A263ED29F45DAAF54AAF86FEC84019CFC8
-:10903000A74DC6A33231EFA07DD109284FA22F0C36
-:10904000944FCBF367378EBD84F2D0CB777E3C0153
-:10905000F183D532A2C7A69D17974F5B81E731F602
-:10906000FFA17C5A8FA26D83E775B98EC47C5A0F1D
-:109070003F2F19D74CCEA33D9D135679BE5B64CBD1
-:109080006368B7EF34519EC8A49DAF1C46BFE62469
-:10909000330B519C37497F38E29CEACD8579CE7CF1
-:1090A000F4DE96150CF3B09FF3F07B9989FAC0407B
-:1090B000F600C53AE2ECC699126FBE267B40F26B11
-:1090C000BFB0AF3E54A2F796E0FE76EBEDFDDDA318
-:1090D000F1E7CAF8D80079203DFDE781C87B66B585
-:1090E00091E284B8D55D7D74F0D5E2604B5176F69F
-:1090F000130753455E97AA70D6C11C3CEF47C6C103
-:10910000D4EE1114DF32C5E26061D64F1C4C1571EC
-:10911000A55506AD8EFC34BB4D6E6E477B897FB581
-:1091200075677A90BFF9E79F7C063F05A03A26B89D
-:10913000506F6813F06FB8F838D883B9FDC4C1B662
-:109140000ABDEDDD525DD80870DDCA38FF0DF4C8E8
-:1091500078988EECDAE83D05B46E658A99D6FDEE16
-:109160001ED336F44FCD9271AE3DDCBF364BC4B347
-:10917000DE9D5242FEA781E03CAB3D315EF0330103
-:10918000E7B3962AF2D3DF79FF64F2CFCF41FFFE37
-:1091900090D87D0926FC7CEE767E9FDEBD5DA1EF3A
-:1091A00099229AE84827B5D3774D17001BDD84AC88
-:1091B0003700587305BC56740AEA43EE362883D24A
-:1091C000AFAE56032E68B7F5700AF9155739DD2290
-:1091D0006F8DC79D036B95E0303E2E7DC72CD0A6CA
-:1091E000D3709C5772B93FEACFB9C67EBF23D16610
-:1091F00010F163315F0B837387A74EE1CF55E23BDC
-:1092000079C9F090E3B5199ACDE8DF8B16F0EFA19C
-:109210009C356AD3C9EF9C5E42DF3D6A4B6D6EAFF1
-:10922000E5F544B3672D512FD57F43E50A2973A790
-:10923000E37A77E772FD2619CEB33B12CBC9719F53
-:10924000E47B5AB3986F78CE90F3EF31ED16FCF6CD
-:10925000EC9A62712E1E8AA3B419DCBF29A6F829E4
-:10926000FFAE514B3E879BAE803F073B6AE8FB74E5
-:10927000402F5C8F637CFD83BFE154905EDA1C1C41
-:109280006FFFA7EB4E5EEFFBB9251CBE0E4EAF6D18
-:10929000AB952087175FF7C5FA490C795F2F5F7C84
-:1092A00057F13C1E2EA67EC41F02F71888EE765991
-:1092B000F8FD4BC9AF28B107ED4F61EF0E42651ABB
-:1092C000E3A12756D2F78936D50F4EC378E9F8A91E
-:1092D00036DA47D31E7EBFB77169A410F1BAA93A36
-:1092E00052D2DC0F5C710255F2576837D3C9F87758
-:1092F0006EDA13E37FC971DDB5195A415E26DA4B88
-:10930000EF76BF82E7DD6D21F9DAB434FA38FA0F6F
-:109310007C19BEA1587FEAAEB727286EEA46FAFC50
-:1093200099DDC3E95EE2CCB6C47B5E6C6D625C9194
-:10933000B5A7F3FB6C9D89EFF13E5342BFF3E28C7E
-:109340005CBF596FF48D40FDF39A6FF23C8A8FE653
-:10935000E9189EEB47167EFE817B5205BFF694C44A
-:10936000CB83AA01CF17DA8DC4783ECF1F95ED1BB2
-:10937000F17CE15C1BC4F97EF4EC152578BEA7BA3C
-:10938000AF28C1F35D6FE8D0903E52B27DD7629CAA
-:10939000EDF8B55ED20F65BEECC5E2DDB4BCAFD76B
-:1093A0003FF755E5719D9CFF2BCA63FC8BF79BEC47
-:1093B000F9BB3E6021F9C2EFB5C6FC7727E9FB5E39
-:1093C00067CEE914E4C7038DF789B0975C66164051
-:1093D0003DACA23A42FD2AFEA663A80F4A3D387969
-:1093E000FD8BC5B9AEC8D30EA35D28FDBDF5626C7B
-:1093F00073F053AE6F3FAA903FD7EC0EA48D23FBC2
-:109400006AF6E57AE22FFF4AF725588F62473B65F7
-:10941000DEA32D547F7AE72CAAD799C361B4C71A6B
-:10942000A11ECBABAE4ECC7F36EEE0F12069FFC281
-:109430003ADEC275A438A346C4CF26D4AF61894DA5
-:109440002AF77B37399927C0501F4EB417655C77D0
-:1094500093977F3F66538F42DF91CA32FA8AF3F1C6
-:109460005C93E2BBF7E769DD887732CEBE204BEB39
-:10947000CCE3F9678508A79FE2A2A01C31C87B5BFB
-:1094800089F70F0FEEBD99F4A1CF997750FFF968D6
-:10949000C184F8FB1C714F748EB8278A7C3A9CC437
-:1094A000A7E3CB0D71F968E1FEF20AE2F2D1E2FB2B
-:1094B000C5E7A38513F819A7FF6CFD228A7BFB0182
-:1094C000CF978C89E16103137F1BA2EFD2FD97ED4B
-:1094D00026F2AB35887C547FFD31B257FC789F86ED
-:1094E000D3A3C6EF61737DA801EC40CACB0D25E67E
-:1094F000AD1EFC9AE953B61BC87FFE66123DCA7DBD
-:10950000C97D34F4289C7E92D6996CFF26FBC1A5B8
-:10951000FD7AB17CE9FDAF591E7E55BEF4D9D7C4A2
-:1095200097CE8B270C8DA679BE8678C207EE8E2C3F
-:109530007429CAFCE1F6DD3C7F7882DEA6F1F8A54D
-:109540009EE73724C771DD13284E29E3C6E6E7F40A
-:10955000C1E5C5D4DE83795F8DBB5329DFA0DE5D15
-:109560004F7A7772FC723EEB9E8047F1397B9DEE1D
-:109570006FFD4FF306F2F3C57789DDACF82BE60DEE
-:109580000CC9FF0AF1CB976C9F66F8E2F0A57A242C
-:1095900028F02307CEEB2ACBE7F89722F24BCC6AD0
-:1095A0008039E2FA0FD4EFCA7CAE1FBF24F291EEED
-:1095B0004B4DA17BFF2E23BFAFE0D2F1BC2996EB30
-:1095C000BD2A3F13E5013FCF875FF80EC3FB670F4E
-:1095D0001B42740F3FD068F3A01C937E2739FE8393
-:1095E000397C3F174B47DEFCFF5DFE71AB9CEF62A1
-:1095F000E36F1B000671F4954C0F03F51B88BF2C1D
-:10960000C8F7CEC9277B5C1B4D718B8BE44B29E5DA
-:10961000C0B7514EEF30B9D17E403F0AC9C7B53906
-:10962000D2FEE6DF25B8AF80E4D747166E4FC8FB01
-:109630003F72FF3F1910DEFF9C9EF76E96378078D1
-:109640007EBC4AA3FB03AB52B97C893EC1F387922F
-:10965000EFC124CB15798F43CE777FFEFF2D5F7D41
-:1096600058C2E77FC85741CE92FD32609CF6BCFEDF
-:109670000191C7D9AB897C19BA0F21D7E5EFE579FC
-:1096800077BF10EB93EFD70939F059BE1642BC3AB9
-:10969000F507B319E3A0E5E59C7F36796D144768BB
-:1096A0000AF1FC9AA6A58CEC7E79DFB5D2E5DB85C4
-:1096B000FD56BD6DA3EF9E36EDDCDA3E98F20F7CD1
-:1096C000A4DF9DFE037F7F22DBB707DBF9974612FD
-:1096D000E215155F7EBAB2B69CD64B76BBD39478B2
-:1096E0008F2892CFF386E4F34F7DF005FB04FA9DBB
-:1096F000AAE779DE7EA766AFA2BC03EE0F4F71F733
-:10970000921FA8690709094649A758FFA37CC29B75
-:10971000A61D5565F4FD8190A58CBE5FF347FEBD87
-:10972000A75377E506F5DC7FFE5B5C6F6A79F07A1C
-:10973000D4338B601E54494F755F5F46FEC124BA17
-:1097400093F4D6777FF4BBE660AB12A3C7F5062E81
-:1097500027A57C7B39DFCDFDD54E913FD83399CD00
-:10976000B6C5CA3667625EE58ABC6B5FC6F5BC9C4F
-:10977000CFE30532CE5E6C06EB73F0F978582CE23D
-:10978000EC93457E040B98637911832F1C6797EB4C
-:10979000936519674F39277E5FC06E24BC486DE71B
-:1097A0007C83015EA09E7D75B4773CDEDB1ADA19FE
-:1097B000BE1AE13508C14F79AA91BB2FC3F845867F
-:1097C0007A35C62FB62C19B30FE3AAEAEADE6FE0AA
-:1097D000D1B83BECD5686256BABCBA02E22FCDA52F
-:1097E00088FFD5BF35F07CC6D52924EF3B0B1B285D
-:1097F0009FF1F4DBA6847B3AC9CF005BEE42BFD178
-:10980000E0F637297E90BA43E9374FB5AAC046FB48
-:10981000C4F6E8874A6DEF0D54A25FE51E857F3BD5
-:109820001256AFB8D0FE5775A877CCDAC9EF7DCF06
-:10983000EA70549B899F2A3CFE72B593F8A4BAFA49
-:10984000061DDA696A0BA3EFB45516703FF6B04EE9
-:10985000BB0ECFFDDFBED0F71B571B5E10CB8F4377
-:1098600070359AA2075CC5B178A0CC8B1BE8FBE7EA
-:10987000521E25EBB3E7E9B1421EF5E9F349783C06
-:10988000503F89DF129FFFCDC0480FFB37C54CF713
-:10989000C1245EB7C93CFF2FB85FB748E4DB1C5B4F
-:1098A000F39FA3F97D77194F09F23C294364651EA4
-:1098B000C12BF2CD00EE7B8743D73492FC614D344F
-:1098C000CE6AFE7DB5A2F621CB2BCBF169670A2CBF
-:1098D000E1D8AE0545489701C08361FDE081B180C4
-:1098E000DF575157A7D0B9A9EBE8CBD24C7564D15B
-:1098F000B9A90FF2F361057C3F329E2BFD969FE5DF
-:10990000FB6E463CECBBBFB5C4CAEF6F89FBC1A977
-:109910004BDE7E1AEF456D11FEE37D7B2EA5DF85C4
-:1099200038BB5A55504F3DEBA8A3DF41AA2BE0FAB4
-:1099300052AADACBECB678FCDC4779B58377F3FC36
-:109940004055DC7F56573BB7223C6B9C3ECA1FFEFE
-:10995000465B987E3A618FFD38C5E9402FA27BAE09
-:10996000275F50A45E94200FA5DD966C8FDD51F02B
-:10997000BFAB2705E47C5FD5CE6289F6665F7B6965
-:109980003F26DB1349FD07D27F981648C8937940DC
-:109990009CBB94EFB98237CAFC99BEFBCE2C68C140
-:1099A000FB12239028C7C6F28898C82FDAA0583D2A
-:1099B000A82F0D9447D497E7C39A2FE3FEC8E62B50
-:1099C000F029F390649E9105F34D32CECF37B1600C
-:1099D000BE4906FE7E06BF372DF3455A0D6ECA3FBF
-:1099E00009FC98511C5199524BFEBA74AF91F0EF9B
-:1099F0000C0B6EC4EFC707A6D9E87E38DE2742BC41
-:109A00008F2A2E1A777CAD26DBEBB07DDF7708EB53
-:109A100018D5A70FD572500FB3403D7E1FB9EFBECA
-:109A2000F46CFEBDF6E47C1399F724E3C0B9C39F40
-:109A300053D02F8A6E7FCA3FF881E857CCC7E9FC24
-:109A4000BE9BF846562BCF6B8A5EC9ECE897AF9663
-:109A5000FCC79C78AEEB155F31D2E77A2BFF5E40F6
-:109A600017F3B4EBA17C77C160EED761EEBD3A622B
-:109A7000D81DF47B0F9B9CDA6B0599317C92EB62CD
-:109A80001BF8BECFE0FD302536DF99797F2B44FDF2
-:109A9000AABAC7C4F13269FE4D7DDF6B095A509EE8
-:109AA000FCB980F1EF8C26E9BBF2F96789FF822FC0
-:109AB000CBF907DA9FC4CF0BE9F112FF06C2B7401A
-:109AC000B538A72329A47F487CDBB76C3B7D877022
-:109AD000FFB2103DCF5894901EEFD55AA233903369
-:109AE0001EDFF25F37E1F73CCEA4460BF17B20D1BD
-:109AF00087F55E2A67468F6099155DC1CBC3A25B6F
-:109B0000F0FB20590FBFF82D2AE379E63276AE201C
-:109B1000F4AD808DBECBB5B217E55679521E4BD24F
-:109B2000770C52C4EF0765DB8CA44F668BB81EAB75
-:109B3000117A3D46A0A0DC9A5346713C1B73EFE8B6
-:109B4000C5FA7C13FFDE0103FCC7FA61C53C1F8226
-:109B5000F17DB37CE19F669100FD1E60B183FAF751
-:109B6000F1F11D26119FE2F31F7A96C711655E2F52
-:109B700063F602D4876C6E965096DF0161AABD0031
-:109B8000EFFDB74ABF9F28BF98E2CB2D8CD3970E2D
-:109B90005DFBC391F4BB24CFFD6828F2CDEB8C892B
-:109BA000DF7596CF3F14717BE58CF87EE11D29BEF1
-:109BB000218599F8BB243326E0A768A76754191DAF
-:109BC000A4BF3DA1473E9529F0C3318DAFCF51E3EE
-:109BD00055F0F740E4F703337D2AF90998AF538F26
-:109BE0007235F3B897F2051BCCD142FCDD9637CC29
-:109BF000BECB70FCB37547EFA47861EEA12398DF6C
-:109C000071C8D0313E0DE548B1F89E040664A17CD0
-:109C100020AF88ECC13EFE304CA178E6A469FCDEA2
-:109C2000EB441652F19C27D8F93DAC09E5C59E5688
-:109C3000986F92C80F9970D89B86FC6DC277222AC4
-:109C4000FFDE45548DCFC7904FE632B8E3E9E17AA5
-:109C5000775C99E1778E13CB377A12CBDFAAFC625F
-:109C6000787C7994A24DC47DBEA888EF46007FE140
-:109C7000FBE279873F17F6DCA52E662E427F8553DF
-:109C800009A0BD70E9F3B9146779BE9251396BBB75
-:109C9000799B397EFFEB743C0E2DFCE0F2778DB0A2
-:109CA0000EE5ED737FC8227865D980DF3A89FB1015
-:109CB000BEED1374BB4FD069459ED98AFC7F9FC10E
-:109CC000BD99F03CD5EC463FD5DE54237D37B675C3
-:109CD00021FF5D0425CDCC8C30AE7E262F433BF694
-:109CE0004DA8D75798299F649FC8D36EFDB14A7E6F
-:109CF0002EACC7EFF9EAEFB5927FBB26ADF47B58E7
-:109D0000AF4F33D23D89BDA9153E311F7DCFFED166
-:109D10005473187F5F21F9FB9D87705D083758D712
-:109D2000637C1D448FFA0A23E9E1F2DE3A8C43F1A9
-:109D3000377DAE99E6DBE7B0EF45BC6BFD80343D87
-:109D4000A8AF7463FE97C4EF9AB44AFABD12A0BEDE
-:109D5000A1F1DF67D76779DCFCBE2DFF1D8ED2BE77
-:109D6000DFE58069A11DFE861123BAE5F1BC020979
-:109D700077A66AD83E87C932BF6F96D557AE52E9EB
-:109D8000BB418A2CB750F921512FBF37FA4EA19B06
-:109D9000DF4BEE79E53F106F87A6015CE09C3C2924
-:109DA000FDDF777AB290F3F7F3CFAFC2857E7F0500
-:109DB000F73932B6FF7D0E8FCB1B57EEE75C8288FA
-:109DC0006FC9E7B2CFE271A39FEDC2E371B8CA7D5C
-:109DD000E873393CFBF691D1FF3EDE11FB0889FBAD
-:109DE000D9C9F5070B755FF73EFBC5BF7F7A9F5951
-:109DF00089FBFC1AD71951BE8675EA0B617DB6D86E
-:109E0000FAE867C72A906F72FC9B28F29B59696237
-:109E10005E12ABF498B9BE989887749DB2B90DE5FF
-:109E2000EB4322CEFD8AA0AB03293F198AFAD62B39
-:109E3000334AF613BF1DD4D286C425F9B3E4FF67B5
-:109E4000738E566019E44014E5D59D830FCDC0C1D3
-:109E5000F73B1E1A8AF20AF8E6C78599E7AF53D294
-:109E60006FDF7A817E918E24FD26AF5FD211BB29F0
-:109E700044099D5D2C4C4F17E3F9F3A097D0F7D11F
-:109E800099BB20B63F20F209E666BE8F9600ADFB77
-:109E90003AC7039437682DF6198B605DD32FFB9872
-:109EA000BEA3C45C75C3518EC07A4D4563FFEFD627
-:109EB0000BFC2907DF4B3D3F59AFBF501EB95C6714
-:109EC000323F94EB51A66C273DDE0F7A3CCF3357DF
-:109ED00088DFFBEB759C0FEF5448AF6F023983723C
-:109EE0004A7ECFF79A126B1B7E2F729781FB53032A
-:109EF000CF9ADC89DF574ACE3717F6C45226ED05D4
-:109F0000FE1D89463BFF7E9290339D770C96DF576E
-:109F1000E2F210E454C2F795EADC89DF571AC05E1A
-:109F200000BB80F433364827EC022EA73BAF74DB2E
-:109F3000038CFCCFFCF7256F310A7D10609115FB77
-:109F4000FE1BD801F45DBB1B8A8AC5F7B582FCF7FE
-:109F50003C84FE9FEC8F4EC9F6DD8478327BA4569C
-:109F6000883F2D33CBC8FDCD806F9B7B19A64D3626
-:109F70003F8ADF47BD9E35BFA51B42F8360DDB4F3C
-:109F8000BFF463FEDDD418BE7DBB2893CB2514320D
-:109F900017A2E3234EDF0C1CA7D311FA237E3F7DCB
-:109FA000538F89E02DF35293E93B6E3DC70D7C3D05
-:109FB0004EBD9ED63387F03F693D1783F7F1789504
-:109FC000CD387E0F84FF78FF23754C0CFF4729BEE8
-:109FD0003B70DE3E3A58C9EDAEF3D6ADB7D179DF6E
-:109FE0007C0B8FCBF953A49DAC4DCAC9423F249F33
-:109FF000FFE6D51C2F6EAEE37944937B1A290EC77A
-:10A000006A785CCD03FFA3DF8711FC6D9AB3CC8027
-:10A01000A8F739FB9E01FD9CD32625C6DFA69BAF82
-:10A02000A378DFCDD30C09BF8F29E1305DFCFEF6AC
-:10A03000F4A4DFC54C864B72DCAE8F1F88FDE6E1D1
-:10A04000EFC5C0339FF17B3739E277CC3614F5C5C5
-:10A05000F7867FC5F8DEC31C8F2E2EBEB7DF10A596
-:10A06000EF3BBC9C3977F342A09BE13F1D49DF7B6E
-:10A07000BF366BDEA3EBA0FCB34D9750F9E5ACEF18
-:10A080002E3E84F55B4AA85CA3FB7806D24169C5E5
-:10A090002D13F1FBF8FB2D7C1C97D5D789BF9BE2D4
-:10A0A0001A3D780CE60FD718A3D4EE86CB1A2FC72B
-:10A0B0007CA81A2B2FBF5EF6FB31541E2CCA635EA0
-:10A0C000BC04CBFB958F67F4171FBCB45409E3EFB6
-:10A0D000A3D5A4F3F693C63C918BFEA29A6A5EBE0A
-:10A0E000D453B57A08D6EB3E99D19F3EF286B0871D
-:10A0F000A47EED15F4FEBC76B40DEF117A6D8A07DF
-:10A10000EF8B782B8FF2EFAA99795E89572B53F159
-:10A11000BB9BD51AF7F38EB7B5E4205FBCC9672C9B
-:10A12000477FBEDD56DC867AF1A0CAAAB178DEE3AD
-:10A13000CD8CF009E8EA10D1D5151F17A62132DB26
-:10A1400012E94AE2ED64494F35897403FCE0F7FCFB
-:10A150001C13E901C67D87F8C75589F2AA8FDF274E
-:10A16000D16D323E0EA817B0443E18C3D390128F63
-:10A170009F5D48AF9C7E3FC2751875BD6E7C5FA425
-:10A18000782EA1449B01F40BB93E745BB231E7AF6A
-:10A190000BFF54A98FF315D8ED59382FAF877E1ACE
-:10A1A000FE989D5C17CCFF05C167255F4F97D22CA9
-:10A1B0007E1F85DB61D2DFD124F6FBDF798429C3E2
-:10A1C00000800000000000001F8B0800000000005D
-:10A1D000000BE53D097894D5B5F79F7FB6249364CD
-:10A1E000929090100893044280244CC222CAE2B09C
-:10A1F00004A32C0E9B8022FE095BC84202E833B602
-:10A20000D80C844D8B6DA8A8A8A80302A2450C0AFF
-:10A21000881AE8B088585163D5D6A5D244ADEC1061
-:10A2200083B6D8FAEA3BE7DC7B33F3FF498AF4BD17
-:10A23000F77D7DDF83DACBFDEF7ECEB9E79C7BCE69
-:10A24000B977D83ECBB9C64C467F7E48636C503850
-:10A25000F385E53196C8DC6B54153E76CAEDE3CD47
-:10A26000C6D2AE315FF5650C3FFD703D63172D8E94
-:10A27000354A346315E15139AC1F6353ECDE076C8A
-:10A2800026C6A6C6CCB630E8671AF3ED894967EC56
-:10A2900085082DDA3510DA997CFB1B15C6E6328F5E
-:10A2A00095C1F76CC5E3C4EF8C056050C616E23F5C
-:10A2B0005DC17EBB415F0CE6B1D0EE08A839F06FFE
-:10A2C0000FEBD129813145D4638679437D0F8B858E
-:10A2D000F2FA37BE53B0FEAA3A05C7E9CA1A92305D
-:10A2E0004D6295946F5D97613D3591B856C69A73EE
-:10A2F0006DFECD388819FE1BC0D8F1C20CFFFD4A97
-:10A30000705EC7159669867A3E25DCBD3595B1BF6E
-:10A3100086C1FAE17B2701872145FF318145B59D43
-:10A320006F959DD7BB3B3C6A33A6D76784AF30455A
-:10A3300063FB143FD6EF140E694E70FE7F3531CDAE
-:10A340000EF3BD5B8575A8B88EE6656618EF0956F5
-:10A350004BF9492E5834C0AF73EB7A7C0AE2C96AD4
-:10A3600052EEF03A604DF8E7FA603AC905008D27E1
-:10A3700070292C21086FE652981DF245222FE1DD4D
-:10A38000C9EAEA8AFD18E15C64B735117CD7E47B41
-:10A390001AEDC1EFACF6114F683F1DD55300AEC9A1
-:10A3A000B16DE10FF3A7F98DAF1AE5FD320EC717B6
-:10A3B000F8B82792F031FE9E11F45D9994A934C249
-:10A3C000BC4615B8288D1DF09E9965135EA6D7650D
-:10A3D00005F1F475BC368BE8CBDC387022E0F6ED85
-:10A3E00081CFE46A507EC2C48AB19E113E25089F87
-:10A3F000816DE1D34A7F06387434FFD722BC6538BB
-:10A40000EE79A5611016C677710AB86BA9889F18F6
-:10A4100067EA881884FBF7302ED0FD142C023C3FED
-:10A4200096A0DD89EDA6316FBE19D61B5BA059340D
-:10A43000070D67C2F92C76F2F9E4AB0EA2CB961D9C
-:10A440008ADF06F5467B7A3F3214F215C72CCC0F13
-:10A45000E52D8CD36DCB46D5EF037A99FFE64B8380
-:10A460006087B12F049DF6DA60622E890FF8AFB7CE
-:10A470003F9CB93283F9BEDB6375F9ECBA2EBAFAA8
-:10A48000FDF6A5E9CA73037D74E5FD8FE5E9F203E6
-:10A490001BAED3D5BFE6A391BAFCB58D37E9EA0F61
-:10A4A000393549971FD67CABAE7E4D18EC9F7E08A0
-:10A4B0006E4F4326C0658EC0D3F5978B74EDCE46A4
-:10A4C0008D3986FB6ACEDAF9E3705F8D60A5BA7EBE
-:10A4D00058ADE573A4CB4AF88BF89CC7BCD101807A
-:10A4E000573E6B3E9A0CF05BE857DC08B7F91B78D7
-:10A4F0003DD96EC1BE45236330F5EBBF9732733053
-:10A500000FFD54FD71D36F8F84948F76169A90FE51
-:10A51000EA5C919D906ED835EC9A1FD476F1EB0EE3
-:10A5200020FE3E50DD36F8B4F84D95F6C1E2E71551
-:10A530003F837E3358CF68CC571C53991FF07F92CE
-:10A54000553E3C14D2BF56FB7F7BA467103EB644F9
-:10A550003D9EC35C7A3C4764EAF11CE9D6E3397A54
-:10A56000B01ECF311E3D9EE30AF4788EF7EAF1DC8F
-:10A5700079BA1ECF499A1ECFC9C57A3C77ABD4E3CE
-:10A58000B97B951E9FA9BE123DFE0CF897FC377D46
-:10A59000CD625DBD563AF0168FC3B467ED4F74FDC2
-:10A5A00096AA6556660AD2830FFE223DF462CC1D40
-:10A5B00000382F043C045C6DE9A0B87EDDAAE47F7E
-:10A5C000810E9A11FF1121F85767466BEDF06B99D8
-:10A5D0004ABC82BCFC8B0BF84878AAF61DA6D37B3C
-:10A5E0007D9D6206BEC1BC85BDBC9141BE6794A77E
-:10A5F000528EA23C320F0ACAA38EF85A1B393A4136
-:10A60000CA9F0EE4A8AB5B900F02403E665CCE335F
-:10A61000B6D684F39821E8FA5038A7CB4B58742D5E
-:10A62000D4833A83615E1FE3BC619C8FC3FB1EC170
-:10A630007D7A2BABB360FF335903A5B35833A51A0A
-:10A640007392DE50C4DC94CE615E4ADFB66BC9A95A
-:10A65000C037CBEC8D8350EFF84BE17B27149CCCBB
-:10A66000F1389C6C877095FCFA7DFC27D4F3A67AB0
-:10A67000D353213FDAEEBAF321F87408E504F2DF90
-:10A680007171345F66F6664FCA6EAF9FE524375E20
-:10A6900053340DF9AE2FC9EEDE0A6BEB9BCCEC49BF
-:10A6A00028E712FD6993003F79A97AF9D247D0C40F
-:10A6B000F35DEA16A39EC4983F16E5C3D58E3B3CD6
-:10A6C000D5732DAE5FD6BFD27AADD6BA4538CFE6B8
-:10A6D00072877B33D0E707021F4FDF620BA851411F
-:10A6E0003AFA2862D6D178C0DB5D11DA0DD8FFF4D2
-:10A6F0006937AEC2BC7228CEB518E677B110E0CD8E
-:10A70000E13F96C35FEB9E004B3CDF4DEB158DF0B8
-:10A71000F772F8C33FB2BDEDCE9FCF6794C2C77F3B
-:10A720002D429B82FD1C3235A4B8111EE68641A441
-:10A73000773AE2A99FF3560E978EE03032A2DB4CB7
-:10A740005CD71C9BCDAD429F23158ED72FE3EE988F
-:10A750005501FF9C6BF2260454DDBC8B10DF65CEE7
-:10A76000C2EE494037E72D62DEF67801775716EEE4
-:10A77000AB8EE65D83FDA31E78AFE2473D90FE40C1
-:10A78000FE655F8CFF7EC8DB4C973E988CFA4BB61B
-:10A79000C9BD198A368643D740EFEF0A783F6181F9
-:10A7A0007C2C7D5F83DF13C379FBC4874DFE1A6861
-:10A7B000EF1DF90AE1E9E9850E5A4F2173597193AA
-:10A7C000CD16FAF39F47FC7D7F23E0C397AAFD14C3
-:10A7D000D771479C29E5039A87D617F51D36F4C72C
-:10A7E000D1BFDCA7939C7C097305DC26330FEDBB3E
-:10A7F000A94CB3E0B8BFBB60F520FFFC9DE027A0EB
-:10A80000DFD3F719CC4FE96D2C40F56F678D947F3E
-:10A810002F22A75B15CC6FE223BD7A227F0D81FB2F
-:10A820003A82BB5DBBA313A797939D11EEEBE37F29
-:10A8300014FD4E14F402FBF551A417D8AF0372D3E4
-:10A8400042F6CD684E2FCCECECF9CFF64D430B978A
-:10A8500017C0181D49B0FE1B040A6FF094929C406B
-:10A860003DAB13C0BFC1A5929E5530A2C98CF3DF8A
-:10A87000F635E7636F2C63913E287F6384CA105FCF
-:10A8800013368C398DED8EB340A701503FFFB27661
-:10A89000241AD63F01F83B706456D015E444885C16
-:10A8A000BA2971DD68D4236EEAA1FF3E96D5AA08C5
-:10A8B000BF71597AB93201E58AAC07E31D4438C447
-:10A8C000B6952FF5A942BEF4617DAE46BE2C367911
-:10A8D0000E131F013A43BA2F32334F7BFBCDD54BBA
-:10A8E000917C8CF4969BC5D82DE32E592FC27AFF0C
-:10A8F0009EAABD83FD2C1EFFE759C88FE11CF5768B
-:10A900007F94A3EFA8EC7E28FFBC1A200EC2F5CBE3
-:10A910006A3BF38082F355B593F2A7AA13293D53FE
-:10A92000EDA2F45C7526955FA876533E2DCDFB070E
-:10A93000ECB768CDD766D4A3568749FCF1792C11C2
-:10A94000F4BB3A8C9FA396442EF9A810C65D420230
-:10A9500010E4755DED18044BC9BEBAA398C277D553
-:10A9600081E5EB1437CAA7B947B455483EF38F3792
-:10A970004E40B633F0C32F13106EE59715A6C1569F
-:10A98000BABFA7E72B1CFF64F5609AD7E96A0FCD21
-:10A99000CB53DF74340EDA9FAD2EA0FC9034EF3928
-:10A9A000ACE7615F5BB1FDF81D4DE66428CFF72889
-:10A9B0001EDCDFC33DCCEF07FC6DB07079B101E464
-:10A9C00005D2CF88EC494FDCC9909F6B7FC1FD3128
-:10A9D0003576767E1CD2D5E04233D69BF63DE85CD8
-:10A9E000A941FABED23E397F4021F89C3F1043F086
-:10A9F00090702A17F83ABFB7EFCD43A0DF03A04706
-:10AA0000AA30BF96CB269A5FCB47E17E54128CEDDD
-:10AA100017EF49EFCC1CB84E686CC37CDFCE0CF04E
-:10AA200010617FFA093C979D7DFEEE44C4CBD9D8D6
-:10AA3000BABF7C827CEF33CEF740E3FDEA31E48B92
-:10AA40005D13DDF743EE8205CE6974AEA98C40B983
-:10AA5000B8D0CA349ED7FA62FE6C38A3F3EBA09D3F
-:10AA6000C923713FE178AE5E41BE96A9B85815D0B2
-:10AA70007DC6CE47D27E0AF3DE5E37F793C7203D10
-:10AA8000EF37F92C20B7CEB3BA0BAF225FDEE270FE
-:10AA90006F6558DF1C8EF57F6EE1F3F26D8573BB39
-:10AAA0000BFBF3131D43B915CBCB5E7CB40BCEFF70
-:10AAB00035D44B20FFDABA08E277AF59DC27AAB0C9
-:10AAC000DD13BCBF677E71CFE7FB307DA03CEF1E7E
-:10AAD00048FBA7C5523F737EB5A00FB607B9CF920A
-:10AAE000803FFEFA6525100670CB5E7F7079128C70
-:10AAF000D76F6393A90BA4B95B941A4CFB762B38E0
-:10AB000086F2F6DA3417E1ABFF8E5415F5C93E5DD7
-:10AB1000FC9F5C4FFA805E4FC85AFFF5C82E2CA8E8
-:10AB20002FF451EACE2C037A58DDEDF779FC9C58CE
-:10AB30004BF3D8533FF9FDDB18AE0334119C77A1DA
-:10AB400095EC14B85C0BE4CFEF4EDF84F68CBD2699
-:10AB5000DF26925F455C5F39EFF53D8A74560EF54E
-:10AB60007D902FCFF5455D07E5E59FF5700345B175
-:10AB70006E4FDE5080F058B8FBA1315DA0DEF9A128
-:10AB8000CC0DA860C57B2E8DC176AC1BE8D6D8CF86
-:10AB9000EE9A845BA1DDCFB3460E44BAF2AA7534B7
-:10ABA0000EABE0E33C22E41E6B04E024081104F544
-:10ABB0007E0E9FF17B6C7DCCC16416C44F45FDB207
-:10ABC00054B4B70CD0EC6E15F74DAA2FA9D211943E
-:10ABD000A320FF6E4B837A4956D1AF73728AF72A4E
-:10ABE000E49F55C833D9DF2356E60B8BE57AB38251
-:10ABF000F2D9CAE5F656E02F557941B90DE396E250
-:10AC0000B856A12F278390CE8579263F62F3936EA5
-:10AC1000F023C737DAD1A4DE323DAE667F23DA7B7C
-:10AC200022B4BB711C69376366B70BF5A215119E80
-:10AC3000AA34D2BB9A53700D205797A6417F0B556B
-:10AC4000D0C3D243F430FB8F93AB2F447896637F0D
-:10AC50003FB6BE91EF2EF9D6C472810E963C64A326
-:10AC6000736A8DB037D408FB564DE4203BF20B7667
-:10AC7000C4547614E4ED30DE436BBF4B22F3889F5F
-:10AC8000D430D62EDC0E001FD080EF04406E68C09A
-:10AC90000F865F6E5639DD371C8E1E80FC9679223A
-:10ACA0005D680730312D449E1AFB01BC6DC6758E60
-:10ACB00060114C0B919B1E1663C5FDCB1CB1FFD2DE
-:10ACC000FA870AFCC9750C15F6BCA12D1F4520DFBB
-:10ACD0005CF26D1EF1CF8ED6B75FACEF37B83E4851
-:10ACE000937A79F7E03C877DE334E33A879927A6A6
-:10ACF000A09E03F37F0DF13CFC1B937EFEDF87EBF0
-:10AD0000F23F761D7729CC67C2FDF9B5D58FFBB32D
-:10AD10001EE81BF773FD822C3FF281BDB01FEC785B
-:10AD2000AE9964253DB75ED849EBE39D645F7ACD6B
-:10AD3000C2F3BE19A27D182339523FA30BB5EF62AF
-:10AD4000AB7C2B1BFBAF8920FE596FF1AF49C3FED3
-:10AD5000EF8D73FB005F2ACA8FFE70DE10FCBBC64E
-:10AD600012B84DC5FEBEB6321C6F7D4C20B902EA4A
-:10AD7000AF5FD085EA7F04AA14DAEF86984C774C4F
-:10AD80007460B9272916F27BFFA192DC589F0B79DA
-:10AD900007F171B207AE9FE8490AEF84698289E63C
-:10ADA000A3B24AFA9ECADB7D62E1F56E15F8FB5844
-:10ADB000E007F639F1016D428419E9D8945EF46D2B
-:10ADC0001AE1DD93A4C07C1E9BD393211FBDB5E483
-:10ADD000C654A29BDA47889F4D173890FD6103FB4C
-:10ADE00020D4A3F99F1973B786213EA71687917DBA
-:10ADF000F4A3E2E5912E683F55530336B41B4FC9C7
-:10AE0000F7849EC74DE91E1AB7BCAE77FA97217436
-:10AE10005D6403BE01FDFF225CFB9EF6EDBE5C2A75
-:10AE2000DF07CACD0FB0AF3E9FD37327D935E6C831
-:10AE300073646036E2F540B39DE1F9A4237AA8413A
-:10AE40003C40BFDD855C277A45FC4F0FE7E71C33AC
-:10AE5000D00BE46BEA7AD339E7290BF32888AF3DAE
-:10AE600036C27FC124BB87EC8FD3C337D9A0FC0E79
-:10AE7000C1CF6AA687D3F79AFD917E9342E727CA8E
-:10AE8000FB7659A85D99D5FFEC36E8A7EC406F92A8
-:10AE9000377BAD62DC57237879942775E5002CEF7A
-:10AEA0004C74F09AC5154DE56FAA8CCAC3031931CD
-:10AEB00000C7B830AD5BFA40A43BC0B303FBE5DF8D
-:10AEC0004F08FA3A01DD22FE7C9591D42F6D7DC8A2
-:10AED0006B35DD36233E352B2F673F51A9FC84D3DC
-:10AEE000933417F2272A93695ED2CE74C26B25BAC7
-:10AEF0003F51A690BEF4C72A35600DB5E34FDA7E08
-:10AF00005F06B4FBE28085EC78337F597A1CBFCFB3
-:10AF10005C5E4EF6C899254BC94F7061E9178336C0
-:10AF2000C07A1A977F9AA285D8A5679641AB90FD03
-:10AF30007C43BA67503AE06776BA762DAEAF22AB63
-:10AF4000711EEAD717AC0D4FE27921A3933614BFD7
-:10AF50005F7CE5E436AE773767A09C5868E67422DC
-:10AF6000E56D85A0C34BE9DA48AC0F709B8572256F
-:10AF700022AB81F3BFA53F8EFF9FA9DFBA57817136
-:10AF80004AC3EB1752AAFA73B09FB34A204A492723
-:10AF9000386AB8AFCE390351087FCDC4F5BCD2EDC5
-:10AFA000FA75E11F7302DACD18D9C14BEB544F1873
-:10AFB000EE03E6B7E2FC4B9935583F35882FE8871A
-:10AFC000F0C51C7F9CF553C043C9B3BDF3F07C5161
-:10AFD0001AB3EF1743A81EB493FB456D9B97EB691B
-:10AFE0003B1FBEBE73621F9C832F16A4971D36792C
-:10AFF000CEA7F12FBCD299C64F10FBE48222E8F510
-:10B00000D9304E576E5817CEF3054E570F4B3EF9B9
-:10B010002CEFA734CE6742BE545AED24BA927C0975
-:10B02000E642FBEBECCE646A27F918F33246F5777B
-:10B03000266DE6FA9B38EFE284A17EC9AFF9389815
-:10B04000477E7EE6B964392EE9DB46796C5CF7EA27
-:10B05000746E9F0239DDF99F9D173313673F31A747
-:10B060007FC87A22AD822FB8132766A37FC1AAEBCF
-:10B07000F742A4F50E8F03FD0CFAEFB2BF07D3F928
-:10B0800079B2BB01CF5DD4E68336DC874F33921BA8
-:10B09000C6793C26DA3DF75C2B5E55614F672E4939
-:10B0A0004F2EAECF13FE3EB64AFCDD990CFCB81411
-:10B0B00061951684E3DE5C2D19E5C605E11FDA1BF8
-:10B0C00003F92CD4A7385E645EE2C34897CB3F9E59
-:10B0D000978CFEA837D2B99FCD08EF6500572CAFEB
-:10B0E000B1C0F9260BCFB9C71EFCB267703D5F55E2
-:10B0F0007B3C7342F2F336E4DA713FCEDF986B2F7C
-:10B100000AC147CDF6FEC75C00F773DBCD6E64EF76
-:10B110003566FF2F504FAFD9AED6211D41B91DE185
-:10B120007DCE71E81DAC376F634C1EEAE1B2FDFCC9
-:10B130000DF99E392178E8BB5D8F97EC3A7DBEDF33
-:10B140003E7DFE3DD441E3AFBE5D6E409FEF7F4C40
-:10B150009F67CD80BD41A80F70BCBD3CD87DCC059C
-:10B1600078EBEE57DDF8A9BB63D2E4F1A8476C5445
-:10B17000DD3DA1BCFB52EF58D42B4E6D9CEB46B489
-:10B1800017ABBE853F059C167F3AE618CAD5B3AC0F
-:10B19000EEF7E3012FF3EAD759CD2E5CB79EDEF729
-:10B1A0009A04FD3EC7ED770BFCFAF2B67C6199B4C8
-:10B1B0007B6486D297910E60DC5B3C30A1B2AAF72B
-:10B1C0001F44BE503C0E081FE8ECDABA7556D4FF97
-:10B1D000AE3C8E8FEB970E8F0BE1513898975D57F1
-:10B1E000358A7D01FB8EAD7D6F0CCEBBF0E70AE9A1
-:10B1F0001F852FF53A82F4D5B46BC64D94DE5240CC
-:10B20000EB9776C2F9F54A2012F2CEC1AE7D8DD011
-:10B210006EAE9FDB3B8A56D882FC90A19FCC308FCC
-:10B22000F521E530FFF9FB0E7EA740FFC51BF5EDCC
-:10B2300016009F46F953B2E5075BE877791EBDAE6D
-:10B240007E938AEB9E2BE62FE527F30D273FC575EE
-:10B25000BC09FB12FF0FE44E698216DF233E28472C
-:10B26000AF5BCFDB03DB2DC475973BAC2E5C77B9AE
-:10B270009D0522603EC722AD1E277CBFB42192EC03
-:10B2800074F36CA0AFE651CA308E011831F9CBBE11
-:10B290007A5725BDA73C8EE3BDFC2985CE69E568BC
-:10B2A0005CC5FCD33CBF8005683D482F9ED075FA35
-:10B2B000F57956CBCF7765E6C041844B096BE4E75F
-:10B2C00033C0A727C4DF5D06EBFC2816F537437BA8
-:10B2D000E6D6C88FE7E0FA58C5BE1F6CA1E5F29C20
-:10B2E00029CFC1D27EFC5486371CC7B108BD79FD79
-:10B2F0007D9E0C9CEF4A8B2703E1E05B1746E7FD40
-:10B300005B3771F9B53E06F4D84EA43F933E7EAB51
-:10B31000C2F5733683F3C321A61703286F9A1F8AD9
-:10B32000716F76517D9263EB1FE8CDF5FF7FA8A486
-:10B330000F35AFE37111EB7339FCD63F90CDF57F3C
-:10B3400029F7E219F5D756DFF664A01D823DC8E75C
-:10B35000F5092E2944BF8EE8AC4D467CCBF549BD9E
-:10B360009C15FF387FC65611A7D1BC2ECC8FFE8C02
-:10B370002F15EF5153887E3BA707971383467AB664
-:10B38000897AE4F798639A78FFF530AF390F9B5CC0
-:10B39000687F6B85B7C79381F2F3CB756179486796
-:10B3A0008346727BD4895CCEF72306308F1FD2721E
-:10B3B000D16F790F932E4D0C07FA837EBECCE7F642
-:10B3C000F0C8015EB2036E7571BE6F5CC73DA29F8F
-:10B3D0003956EF6F87B5331F0917369AEB1D5F2E6D
-:10B3E0005236F37901BE213FE85761643FFC52C8F1
-:10B3F00025095FA01B8A7B907C2BA6955EFCCF86DF
-:10B4000001BDACB3703A90E7B6107A11F8EF46F888
-:10B41000BD55E0973D1026E8C5C4FE8670CC777216
-:10B420007AB8CAF317E07B5D8F816DCF6112DFCCF4
-:10B43000EC1FF8CFFC2EE52F3FBFD7077A46C90B8C
-:10B440000F4531A877DA5C9BE086F6655B57467955
-:10B45000203D65F6453961FCD37EB5C0DF0EBCDF0B
-:10B460004578F3739C4309F1939E79EEE713709D41
-:10B470007FD96A71224BA8D86EA3F3D8C2DD0B48DE
-:10B480005F877C13CFAFFE1AFDA615FBF4F6F99289
-:10B49000671E4A7011BC7DC9A6444C03C90CD285F5
-:10B4A0005B2CAD7E641806F4EFE655383F637B9C59
-:10B4B000C765C077459D5A688D6E5B5E21F84BC5A8
-:10B4C000EE9F7F8D76C38ADD379E447E5F61F00BF1
-:10B4D000140BFF88D12FF09B1E7ABF33C087E20C7C
-:10B4E0007C30AF9E442EDCAE5CF3EC23394DA83F9C
-:10B4F0006C792B4AC90AFA07A4DFA4A56EF653AFEC
-:10B50000BA3ADE9717847D388837CEBF5CFB140CBF
-:10B510005682833F4FCB2C81A82178DEDB6421FD4E
-:10B52000B7ECF9A7B73D8674F6B18DE47BE9F3AFCC
-:10B53000FFFE3AD49F77593A8DE3CB7028217139B9
-:10B54000152E6E8F93F82979E975AB2B9B7F5F1AC7
-:10B550001BC453E9AE83568C0F32C27354DD416B6A
-:10B56000A3A31D7CD5358D213BD4B37FB5E2FE3836
-:10B570007D40619D53DBB62FDEF47A14EA6708271D
-:10B58000944F126FAD7834D487FE27BC3A80EA39E5
-:10B59000F19C72253C3ED58371BEF272248B817979
-:10B5A000147F62F38F43FCEE5C1285EB3969AEE4E5
-:10B5B00074FFC4CA04D4F78A2DBE0427A5FC7BF10E
-:10B5C0009377113DCE572A139C5944EF4926D22533
-:10B5D0007C49B8CEB91BA7D23AE7318DE8B1F8095A
-:10B5E000D5EB87F45B332BD8D5CEBE19DB93F3A90B
-:10B5F000939B01B9B0CE93223ECBF73B559CA3174A
-:10B60000913CBF4BAC99B1C594FF56E873DD7AB657
-:10B61000FABFEDA1E7D08A2DAB1B104F67BA793A7C
-:10B62000E33C010E3E0137E507E8577D2FBF33C7E6
-:10B63000137361FC02B503B93A0ABF63FD068B07B9
-:10B64000EDEC21EDC439918F7FA7181FE61D8EE721
-:10B65000E09309EDC77FFDA4A7E40BAC2134FEAB5A
-:10B66000433EB0E53EA2AF6F3EE07C66A17F620143
-:10B67000953758029DB1DC7F708A427CC2C602EDCC
-:10B68000EDF32D16B1CFF5E5304FB3120ADF035CB1
-:10B690003F95F4320FF4B240889E10A41F6BF03B2C
-:10B6A000ADFF57623D8DE4CF937EC0F9823F18D73E
-:10B6B0006FE417F93D0D714AA23DDBD8BEFF29C8E2
-:10B6C000277C346E19C877D447CA3EB6911E51F60E
-:10B6D000BCC58B703ABBE3F0EF6FC5F36D9DDCD753
-:10B6E0007A3E6CDCD7C52F0E6C775F9F5D9BDBFECF
-:10B6F000BE86EFEDEEEBB50AF1BBFF2E1F06C94784
-:10B7000076892BEDDFF91DF0E14A035CBF6559D165
-:10B7100043B0D059D89DF06480AF84AB91AF5A91BB
-:10B7200049B6C35719867484C053C251D22B631AC9
-:10B730008DD34AD7926E255DB7D2AD71DD7A781A76
-:10B74000CBF310F7301FEF2B16D217CAEA797C2201
-:10B75000B4A378BA0AB4CF53EDDAA3C99D42F37EFD
-:10B7600043BECE50DF63C87B0DF53543BE5257BF95
-:10B770006CDF612B3F3F0474F56C5563E93CD25696
-:10B78000CFF073BFD3EEAFAD3EA48FAECD56E493F2
-:10B7900096E5CC1709ED9BF7ABA4F75C743547A190
-:10B7A000DEB2328CEB75179D221FC3F3CDF1D65557
-:10B7B000C827E5F7E6306E87B9E86D8E8A0939CF7C
-:10B7C00037D5AB5168FF6DF4B382F6E35B6A683F2F
-:10B7D00035B28ECAB97E77319CDB1B2E86737B43D4
-:10B7E000BEEA48A9423B6C2D8F239CB36C5A14C50A
-:10B7F00061D4A7DF3C1DBECF7D93C20C308ECE8CB2
-:10B80000F10FB3392AD929E6A378C2D9F53C0E62E3
-:10B81000CE5A3D9EE739B650BCDCB76C29A5F3D6AD
-:10B82000EBE3174AD85AA2B3E28D86EFF563699F1E
-:10B830009418F68926ECC3C67DF2A1DC27B92C57F3
-:10B84000172729F879BE9A75F374C0C7C5632AB360
-:10B8500041BEA55E65AB06F0B858F43FE18104F740
-:10B86000DF42D8AFA83749789DC37DD4AB63FDE5EF
-:10B87000DC9ECF06FD14E966EFA7398F437A6EEFA1
-:10B88000C719AF61FEE53FA47CCADAD61F75E0BBDD
-:10B8900059C8A72F1EB031A4F78B07DE48417BE4BF
-:10B8A000C5576D74CEBEB8DCC6EDDC0722FD28623C
-:10B8B0002E76E37A71CDFEBFE634925C5EC1E5621E
-:10B8C0008695F0DC52FFF713684F6FA9875521DF8B
-:10B8D0003F1041FBA9E2D530B2335FDCFFD741A175
-:10B8E000F6B9FFEE7AA4FFFD62249BFE22D2710C12
-:10B8F0003F1754BC76EDD3E85F2EDF7DD03A1BCAEC
-:10B9000047FDE63F7390AF5E7C91EB53172C8D4F54
-:10B91000A28D3322E3D2AF2C4968E783CEBA30B68A
-:10B9200025A3FF645F567B70E170B80870C0750195
-:10B930005C8A511E74048FB47F5B787C3D8BF3B7B7
-:10B940006B18FAA38370513CFC7BA4DFAED0FAF9EC
-:10B95000F7037FCD41FE73A5F57A70BD03FFFFAC01
-:10B9600077D6BFED7A39BD7F85F235BE2DDDB7A51F
-:10B97000EB97FF83F23B23DD34DF1FB9DF7FF6FF58
-:10B980008CBE37FEDBAEF74AF87E53E03BD289FE31
-:10B99000CC8BFBFF33855DC5BA5FFB3FBA6EA9C791
-:10B9A0008F54DDC772A1FE5BACEE03772A6923EDED
-:10B9B000EA21A7321479BEA3F3D328C6E5F4287B85
-:10B9C00029E99FA3BA3E40FA720DCB23FF85AFABA6
-:10B9D0004A7E1D0A020138BC91984BF7AC9839D0C9
-:10B9E0007509E447269753BC98F15C392A7C7C01A1
-:10B9F000EAA78797C1BCA09FC3912627FAA84777DB
-:10BA00005503B61C4A9B303D9A3296E2FE473BF402
-:10BA1000E7ABB18673D28D2E7D79017BB113FAED40
-:10BA20000AB22C74BF620CD60F39571ECD70D23AB1
-:10BA30006F64B52B9C8EAB8753622F7ECE6C0B87C9
-:10BA40007F0EB7367012E768B3A86F849BD9717FF9
-:10BA500003B633333817F3F5D2795A9E8BAF044FC0
-:10BA600026CEDB6631B484AFB92BF7CF86F44B70AA
-:10BA70009170BF5A784B3C19E12EE12BE166C4C3AB
-:10BA8000D90C26CEB71CFE5DCDB966DC77C3845ECB
-:10BA90003FDA1CC3F35D1B542FED473FE16DD437F4
-:10BAA0006E33EAF5231C3114476ABCBF5034386644
-:10BAB0009002EB4D36339F0DCEA1E87B23BBEB7D8F
-:10BAC00066FFF2541C87DB77BB99B9FD1A76B72F56
-:10BAD0003C8FEA7BAC902F7C703EF340FDC264E665
-:10BAE00056787D161D4BE1714CC5383148B15D610A
-:10BAF00034EFB7B033F32FE7F824BCA0D907ED1B20
-:10BB0000D0AFC714CBDB47E5517B9F89B7F79821AE
-:10BB1000ED9ECEE3149A5772BB7CE1EA6E19C83FE2
-:10BB2000C68DD4DB996B7B717FA44CBFEFC5F7BB8F
-:10BB30006A7227D27D8A15BDE97CA4867BCBF7A0EB
-:10BB40009D7E278FD3295C75FBF88138BF9D716E70
-:10BB50009CDE9909BB06F1FA33EEFA10BE6BDBC32B
-:10BB6000E8BB2B531BDB0BE30114D7AC3DF0A16802
-:10BB7000EA616B220CA1D54D3C8F76C209BE5DEF08
-:10BB8000A07F72C21495EA4F603C0E93AD88A03836
-:10BB9000CCF1BEAFCD89D0DF78387460795398335B
-:10BBA0006511CCBF50D887A7897863359C692F3A37
-:10BBB000705EDD32D2E0FB78D67E7CF243627FA9F4
-:10BBC00023958DE867EA3E8ADBEF657DEC07FB7D18
-:10BBD000BC17B747158954E601AE547FCE1A5B53A4
-:10BBE0003A9E7FD65802BD20FDB0F7C879BDA07C33
-:10BBF0005C1A1BB301E17E8FCA36D37C9B0BC9AFA5
-:10BC00001099E9423C6840D2E45FA94D75A15DAC52
-:10BC100069445D00FD094D8FA6BA6B5C84658A0797
-:10BC200092E7ADA611811E68C76FCEE57E8913CE5F
-:10BC3000C6483C2FCE76D8F9FD4911573457DCA3BE
-:10BC4000E95ED3F8C035780E7D48257FCDDC87F8D6
-:10BC5000FDB03F3BEC7E05CF6DEBF93E656BF571BA
-:10BC600044CCE9263BD0ECDA11563C6FCE7178AC6F
-:10BC7000B84E7FA6B602D725EF23F641244097851C
-:10BC8000B58514AFA246C1BEC37D627645E139D801
-:10BC900018875421E28E64FE17E1DA03D85F51B4AD
-:10BCA0006B27D2CBE755E9641F3D2EE86E1CC655C5
-:10BCB000A23FC3DC9884F3198EDF11AEB1CE0C071E
-:10BCC000D17318433834599C1948DF4D2BC34CE8C5
-:10BCD000971BB79CD335EC33BB19DADF6766E1E815
-:10BCE00067B84DB49FB9CCECDD04F9AE76668E8CA6
-:10BCF00045BACA25BA4EECA315E17C4EDDCB06232E
-:10BD00003DCC5EBB8EFC31922E98B961741C8C7355
-:10BD10006A6B6A1EF2CD563EDD67E4965EA1F43092
-:10BD200045213A80F4603AD1C3A46791EEC78D0CE7
-:10BD3000F4589C85E7D132E641F99EC8DCA827B4C7
-:10BD4000B066F257B638AC2EB47F497E22F986BC75
-:10BD50002F2BE9601BC87BB385B1EDD5764A9FAB2D
-:10BD60007632734FC6765427527E67B58BD2BAEAC5
-:10BD70004CFAFE62B59BF2BBAB07537E6FB587F200
-:10BD8000FBAA0B287DB5DA4BDF255F02B8101F92A6
-:10BD90007C45F2A3D90E6B13FA2F255F32D2CD2C3E
-:10BDA00000EFF03C6A4F7C4FF23B5C87292FC88F35
-:10BDB000247ED314AF2F3115F958E30CC47FBE7A1B
-:10BDC000EEF997F15C5EEC70D3399D71BED702F449
-:10BDD0008A7049B1B27D6897AD59E4695A9D1A8459
-:10BDE000FF6DC50A3387D0D5ED9561CC1C2237EEA7
-:10BDF000A88AD1E56756BDFF7A67DC0FF1DA67885C
-:10BE000097133FFBEA893FC0F7A77E76A627E21B80
-:10BE1000E6B1F5111C776978EB3C6231BFC2427E16
-:10BE2000AEEEC27ED25DD84FF04FE87DE6A77EF63B
-:10BE300037DAE74D553617EAC59F20BE00BE7F149E
-:10BE4000F82AAAB2111C0B577EF1FCCBB8DF975A27
-:10BE500089DF15AD10FBD1700FFAF324467609D0B7
-:10BE6000AA299EFDF37BAD8108E8FF7385EF63058A
-:10BE7000948399187FB8E68D8F900F2855C7C8FF17
-:10BE8000AEE1BD3D9C9FCF724E77AFBAEA28D56335
-:10BE90008D5D63D0CF23EF25470CF0585DB07EA4B5
-:10BEA0006DC45F51E62196847E965AC589AADF1C2F
-:10BEB000F17DCE1A85FC9A18C73305EF9167AAB4B5
-:10BEC000AF46F432135E9FC2187CD2EF6A494E49E6
-:10BED000BA9DB316DAE1FEA8CDB5CE0BE1C745E2B7
-:10BEE000FBEC4C13A5F27B02F60BFD7559933B1D41
-:10BEF000F58A2E589E8569DE74846F17C718B312B1
-:10BF00004207CE4CB398071FFF29442EFCEFFECC0E
-:10BF100034EBDC2CBA0F48724C8E539499B70AE379
-:10BF20004B8BD68E402ECC6A2CEEC44E502FA9B52A
-:10BF30001F711FDBCEE3A8CB3A9023D2AE760AFF67
-:10BF4000792DAD9BECBE253B7FBD13EF17947C6A2A
-:10BF500023FC96F413715B59FE4193C900A9B7679E
-:10BF60008FFEF56751E4A7D8CDE33B21E576D6A552
-:10BF7000C5DC2EEB86FDD58EBFE8C8CE4FA3DAB563
-:10BF800063EF567F941DBB42F93E0AF508B99EFC4B
-:10BF9000FDDF26D03C94CBE427AAD8BF32A1BD3820
-:10BFA0002FA31DBBD5DE2DEC7A154B0BDAB5771B15
-:10BFB000ED77E3330DFE0333A37B66D27EC7D4ACAB
-:10BFC00068F4037C2BEE9F7474CE91F6EF8A0DD04B
-:10BFD000491CEC57B32B1AFD5B173BD0AF1FCAE4CB
-:10BFE000F2FFBCB0975FDCA1D2B9E7E28E48DA5726
-:10BFF0000B773C7814FD8E0BB728348D72D640F049
-:10C0000003B8327BA85CC338B6B8B6F36EF1F78CD0
-:10C0100046B952FAEBC84AA4B705758A672BCCA774
-:10C02000C5EE8A8E0F99CFA24CBE6F4A6D758308FC
-:10C03000DE62FEF3335D4457B2DE82FA07C9BE0CFE
-:10C04000F52E905EF44204E3F7539ADFC1799EDD4A
-:10C05000D8DF8DFEC20575BB16925EB123C289760C
-:10C060008533226E59F673AF18EFDE4CAEE79D159F
-:10C07000FEA3B33BF93B00384FDC6767146E87962D
-:10C08000ED6AC4BEA8C9E47A5606C2203E587F4174
-:10C090005D53540FA87F72DFFB943E20C659E068C1
-:10C0A000C841797C727704F9BF4EEE7E7CCC6B3050
-:10C0B000DEF9BA119D705FC8FE1FCFB4707C6C545E
-:10C0C0000B105ECCCFE366CA11BEFD43E719B7C9BA
-:10C0D000971ABAFF78FCD0D9DD2F4599B282F82C97
-:10C0E000B757DA934CB88F167991BEA39178A07F99
-:10C0F000EBEE893E946115F5B90CE99AF65F12D51D
-:10C100005F630AA967B3B829CED4B2AFD0C3EF99A1
-:10C11000887B51228E3F5FCD22BFE2AC7EAE69B7F5
-:10C12000219F7CCB42F858DCDB350DF9D3A5069571
-:10C13000E13C17A7B200EA274BEE89DC84724CCEB3
-:10C140007B567FCE0FCAD628CC03EB2BF3AB4C83A8
-:10C15000B40BE0DF87F494D83810E3249B52B95E27
-:10C1600021E3471F2B3679AC20075FCF8C157C5617
-:10C170007B742EFACF2665D279EE8495F954B42BD0
-:10C18000BDC8E34BCBD2785CF363221EBE2C369045
-:10C190001107FD9D13F82D9B14C8C0B88BB21793DF
-:10C1A00028EEE29C95FB3DF13BFA59CBF2A0BD8312
-:10C1B000DED9D064FB98107A2A2B72BBB09E1AEBA2
-:10C1C00076E53A70BECE0BA4E7EE8964A8E79A5EE6
-:10C1D0008EE47153CF846DB685E0EDE34CAE47CB72
-:10C1E000F73BD8AD3CCEE8610B8F4B7D786B92DF8F
-:10C1F0001F02AF872DDA0C8403AE03F5FB05D6DAF8
-:10C200000CD47FE57C1744D5D23CCF097A5F105E11
-:10C21000CBE3B9C57D60AC8FF9261187DEFCAC8D10
-:10C22000E280CE2435ECC5F1CF3CDB9BE1FA9B529A
-:10C23000FDF3F65139E89780CF92E76C015CCFE9C6
-:10C2400067B93DFAB485EB6BA72726BA10BF0593F3
-:10C2500036CC227BCD169B8276BED30AB32662F9FA
-:10C26000D6788A3F2FA9AEA2F8ED12601B787F081E
-:10C27000D202BC07747A6B6F8A373B8DEF3628F495
-:10C280007D0D7ED758EDAC9F203CB6F3F3D599E7F2
-:10C29000FEDE3B34DE5BA6255BF4F175924E64F95D
-:10C2A000DF047FFB9BD8E7FFC8E4F688F288BA87F3
-:10C2B000D3689D1CEE8027FE8E0D6B8C7C7C00C6A7
-:10C2C00053F454908F3CC602198FA3DD613B3F7F2E
-:10C2D0009DD961A1B8F59297233D14C7B6FA1A13F8
-:10C2E000C553A85C4F2F3101F820557EB69DE2CB97
-:10C2F0003A3D17966723FD9CD139B779AB2AC661C1
-:10C300000CEF539EDEC6E38EC7A12E49E5D9547EBD
-:10C310005AE44FEFCD26BD0FFAF7E0FDAA929FFC3D
-:10C3200094C37172F171AE77D989DF96B5FA7986C7
-:10C3300046A31C2C5F3D241AEF2BB27755867A8BCF
-:10C34000114E97CCEECEC867C7F7E6FCAC74EF137E
-:10C35000E49F2A15F7084A9F53B81F1AF621DEE713
-:10C360002C5D35E411A2CF772CAC27ACE75CDD83E4
-:10C3700051A1F8B8A637E773ADF5AD6EAA5F0AF51F
-:10C38000B19FD2556F45D17CB659285EC588C71F6D
-:10C39000DDFE39F547B56FA58F3A6E6769B37ED676
-:10C3A000F01F9F42FFDFEC0873FBE86B1DDD833B52
-:10C3B0006BA99B87EB3FFB7C18F1ADB3319C3F9C95
-:10C3C000047EEAEB85F318FB4B8AEFFADD64BABF13
-:10C3D00037DFAFEF578E3BB437E7E3E571EE688C9C
-:10C3E000172C7F97F341C0CBCDD4FE5D0BB537AE94
-:10C3F0002359B46BDD9FCF47103D9CEDC2F172769F
-:10C40000672F924F4D319CCE61BE2978DFEFECF360
-:10C41000BD72E91E1D2A3D400F25E2FC7B36A62E8B
-:10C42000C51952DE6411E7B800D444BAC136C0DF82
-:10C430004BAAB8BE556A5F4BF12518AF3B288FD287
-:10C44000802DB66DDC2DD02B9D2F1FEC2DEC983858
-:10C450005E828813273DA8CE8A7C5B13FA62D90ED0
-:10C4600063DC2E2F5F2CDBC36C3BC93861A4439F78
-:10C4700042712AA52B162DA0F8FBCA75B7E13E9391
-:10C48000F32F35B3023CA735292ACDA3298CDD3102
-:10C4900009F5CAD07142F4B97B83E3306702E9B190
-:10C4A000A4F42FEBEDA2EF98AFC57BAD2B94B53480
-:10C4B0004EAA3CEFF27549380138AC1827D83442FF
-:10C4C0009477B06E394FE3BA5BF5AEDE9CEF37A5DB
-:10C4D000BA7E3914F1FCB64AF77F2F7DDF3F3AB6BA
-:10C4E0001D3D2D28E7ADC1785998FFE6DE8CFA99FD
-:10C4F000D79BF3B5528CC78579666CD4C78B676EB2
-:10C50000D1E7FBECD0E7B376EBF339F5FABCFB8867
-:10C510003E7FBF1817CFE178DF18CFE198E239DC12
-:10C5200065E3E770CCE3391C533C87E3773C8763D2
-:10C530001ECFE198C77338E625BCF13C8E793C8F5D
-:10C5400063F9FBBD39DF2E13F1968807A477F64A0D
-:10C5500098EE3ED2C5FDFC7E09D001DF3733ACB486
-:10C560006F1EC31A741EE176A72E93ED2E8C1F5EEC
-:10C570001BA7EDEF1D8FF7501A562521DECC8D1429
-:10C58000C75AF12A8F632DCB0B73A0FDA371E5C9A8
-:10C5900055181EAAC56987B0FE454BF336846F79DE
-:10C5A000D561BAAFDFB8CCF5EEF51C7F648761C505
-:10C5B000B1A44715A29C8BED188FC67872B6561F92
-:10C5C0003F6E8C2737C6911BE940EA7F4F599A93FB
-:10C5D00090AF7FF1AC7D2DCEFF8B30711F66BADD41
-:10C5E000100FE0207EB2F8016533CAEB2F7A733D5D
-:10C5F000AAE518E8EBEDC85999CEBEDC9FF4F2D657
-:10C60000FC5AC544F1E99A87E4D01231A714A5B9C0
-:10C610006935F2B90526929B97405F237DF003951B
-:10C62000F4077C572B743DF8AE56287DE1BB5AFACF
-:10C63000FB125D74F5F15D2DFD7D893EFAF8FC2954
-:10C64000CB0EE2B97FF2DAFEBA7A73BC430C7014F7
-:10C65000F316FAEC1C901F1ED42F976E4841FC2E47
-:10C6600059D0D2B41AF0BB644F981BCB8BF1FF802A
-:10C670002F16439F78EFB278B7B8BF5CA597C3B3C6
-:10C68000851C2A36339F33364887C54EE68981F6A6
-:10C690000BFA34E4E0FB590BDE7C7F90330DCF19AD
-:10C6A000233A233F4AB17828AEB66C57CF9865D06D
-:10C6B000EF373DB4D83E80972F6B0FFF6226CAC379
-:10C6C0005DFCFCF7C5DA97A228BE4CD05B8AC51981
-:10C6D0008E78DF54CBE3EBD07EA6C606E962536DBD
-:10C6E0005C780F4770BD413AF89EF004F8E1769E01
-:10C6F000E243E41769A913EB1DA1F850CF96EB9321
-:10C70000EF6EB115BC9F3B45FE4B71DE90EB3CD705
-:10C71000FB608E0BEF7554EF4B51919F9B766CC372
-:10C7200073C83F6C5A769F788C07EDF9077C87AD0C
-:10C73000E443BE9E3FAF1F15752DEA9FCF5BDCE340
-:10C7400020BFBAF6692B9E2B4ACC7E2BC5673EBB19
-:10C75000C98AF1CA376CDF44DFE76D2FA478CCF9C2
-:10C76000AC92CEA3A7E43B09021EC523958D4E983B
-:10C77000F7837D389F2D0EE7FE3DD08F5EC7774A49
-:10C780002E6D577231CE678A7797B510BE8FE9C389
-:10C79000F98C719FB41C9F9C1F4FF0E0F7403E64E2
-:10C7A00070BA4F6FBB2F265F4EA57D31E5725F3AA1
-:10C7B000A74D0DF4E6E7E12CC379F8B8CAED79F599
-:10C7C0007C1F145B039D26E33E3960213DB7DCCC22
-:10C7D000DF792A877F5F07A977A8AAA3D78AD11113
-:10C7E0003A7A9ECE6275F7696EC1A09290FC947100
-:10C7F000E9BAFAD3A6F435D07F5EB09CF8C875BA12
-:10C800007B7FE54B7D2E85F4CC91FAEF8CC71732F8
-:10C810007693AE7D399B14AC87F4BD45E1E79EDD90
-:10C82000319BD10E586CE2E7A7E91AFFBE701FFFDB
-:10C83000CEA633DD3EEC9EEEFE03978B16F21B4830
-:10C840007BFB74FC773BF0672CBCF51E3BDEE347BB
-:10C85000FB84EE7EB7F017E2BC110FE5C29E549E3A
-:10C86000C9ED49E5BE062BBE9300F037C7C5523D62
-:10C870007B1CC655D62A646FC47429C559EAE3B433
-:10C88000B03F8C7F5C784C2DC47D622C2FC6778A9C
-:10C8900010BFAFF2B8D48568178A6AFB3EDA42B49B
-:10C8A00013A17DCBF01EDA877D5CC26FE75FD505F3
-:10C8B000E1384EC9A57B9B3B0E5A313E6FCA949816
-:10C8C0005CDC3F463A93FC1DF635C515B61C3F4C63
-:10C8D00074D6526C263ABE123C167AB89DD5487F63
-:10C8E000F3588315EFA7CCDBADB8F15C8AF5102EB9
-:10C8F0005D902E0D70898B6D0B0F09A756B819CA64
-:10C90000E7330EAFF9FB143FF2C7367012F033CEA7
-:10C91000BF23F8C975CDD3B431C827E4FAE6E33AAA
-:10C92000701C58078E23FD166CB071BFA693FD6A6C
-:10C93000A197C7D91AE963D2656E97B9E5B299D2C2
-:10C9400029E3F4FB13DBE13E997A3981CAAF967E85
-:10C9500016C23C512E5C2DDDC8F5487E1CDC27FC40
-:10C960005EC295DE3932DA279BFA88FB1003D94084
-:10C970005D7CB3E0B7C6F6C6F866A91F18E54E6140
-:10C98000A489E22D5B1C69A47748FEAB09B9A2AD6E
-:10C99000FC96EA69508FCFC6A393439AB0132E8EAC
-:10C9A0004CA377245296C52520BE0AC39C14D75F9A
-:10C9B000B84CA538EA42A8E70AD15B56AD484F41CA
-:10C9C00039F2F97DBD9EF4813EFFF93D9D1206C30B
-:10C9D000385FACB474B2BB82F53E5F999F82F11DA3
-:10C9E0005FACB34DF7B703AF88BEE23ED3CF3E2274
-:10C9F0003977DE743C6A3AB42F5BB9270AAF0F94DB
-:10CA0000AEE4F2FDE11E5A78DF8128E7376D73222C
-:10CA1000FC9C9B72D04E9C8436DFF8A05E51B232F3
-:10CA2000BF33EA1D65FF38FCA413EF852FB324A0A4
-:10CA30005E7AFA0390930AC939D2274E854117E4EA
-:10CA4000878BA4F7CF4E29CC83FEA873A6837F598A
-:10CA50008DE7C5DCBA8C8082CE532DA92FDA5557CD
-:10CA60003E4DFA4CC9FDCB32F01D426D59CFE8F670
-:10CA7000EC2932DD26E439EAF598A25E8FF135A87B
-:10CA8000D7631EF57A4C51AFC7EF151BF47A619A44
-:10CA9000F06F49BB73F79AE65CF4FBF946B2CC4AF7
-:10CAA00092C30E7A17788912EE46FEB4047528CC2C
-:10CAB0007F16417607F6C18D3A3CCB7783E5BBC044
-:10CAC000C39A41570BD927D75FB6B3D07BBA235847
-:10CAD0008C2E3FCA9EA4AB9FEF4CD595DF90D85BC0
-:10CAE000577EA32B57971F9B79ADAEFE78F7085D55
-:10CAF000FEE6C137EAEA4FF44CD4E52717CCD0D58F
-:10CB00009FEA2DD4954F9BBE40573E435BA4CBDF9D
-:10CB1000567C8FAEFEED95CB74E5F29DE47A3C8FAA
-:10CB2000D9F0FD173BA5F2BDE4BB5546EFB10D1D95
-:10CB300065E276461B97474BDEEEE908A583D97D73
-:10CB4000B91E7430CB330BE955BE8729DFB95CD4ED
-:10CB500097E3359905147E1E6E48423A36D63396D1
-:10CB60000F8D3874C905B8FCA4EFDB53CDC02F86F8
-:10CB70005E73A87F3AE4D3B2E26EA1FC90432FA586
-:10CB800039F15C3AE31633F0ABA1FD0E5DC2F2DD84
-:10CB900059893C3F99916A3268C7BEA9182F3BF466
-:10CBA000FAB4B56E6E4769F7BEBB4C111E784F1CC8
-:10CBB000E1816900E818D34340C7981E013A9E639B
-:10CBC00061EC28D031A6C7E07C8ADF7F0BE7534CAD
-:10CBD0008FC3F914D377E05C8A69039C4B31FD5D08
-:10CBE000F5744A3FA8D6A8DDEFAB8B29FDA8BA9211
-:10CBF000BE7F525D45E91FAB7DF4FD81BE8A90E3A7
-:10CC000001DD7BA31DBD2B2AFD9CD2AF5953C91A50
-:10CC100023906F349A63BEB207FD951DDB09CCECFF
-:10CC2000AB107D2D5BF16CE84BE37775121F17DFBE
-:10CC30005DA9DA1388E70F5327F7ECAFA21CAB7C92
-:10CC40001D436D3E34B5FF7EE422411FEBB33C9B98
-:10CC5000B1DD303BBF9F3CCCCEEF1F0F3337D4202C
-:10CC60007DD57CC75C18FF733092BFFB51739FD991
-:10CC70008F7650E532DFE7C33B31CAD77CD748F720
-:10CC8000958739DD8928AF64BED5EF8F7F42E27C7E
-:10CC9000A41F5EC6F78CBEDC300AF585E10EAB0B37
-:10CCA000F94868DC00FADB0F467E25E7C3703CE9F3
-:10CCB000DFDFF21D0B9872827EFC61F68654B41B96
-:10CCC0000CBFD3EE0E8D5B92FE7AE572A38A765589
-:10CCD000199F24C791F38D34437F79C1F8A361CEA6
-:10CCE000BA5CF477D4943BA8BFCEF0DD9A47F53C0C
-:10CCF0002AB5ABCB45BBDCF03207C5C1CA3881CE03
-:10CD000062DD508FD639FAB2467112C3459C04F6E3
-:10CD100063E7E53EEC6778A74012C6810DAFE4EF0C
-:10CD2000903DA1F0F7E865DC02D68F08D9B7384FFF
-:10CD3000ECB7C7DF60BEA847793C04DFC9F25CE707
-:10CD40001279E977B48F24FBD628C16B1E4ED5BE6D
-:10CD5000403AF2DA9C9F45D0FE4EEF8676D3894268
-:10CD6000AFFF27F4720ADBFDF7E9C5C3F1DD95914A
-:10CD7000BDCD4837122F12CF1DD191C47B489C19CD
-:10CD8000E1B9356E4CF463A4AF8EE84AD2D3303BA0
-:10CD9000C73BE215E3D4241D2997F9BB6EC3CBEC46
-:10CDA00024EF241D19E9A02D1D71BAACB9CB4EFD9D
-:10CDB000B5A5A320FE111EFF3A1D35AAE8BFBA5A39
-:10CDC000FAB9A3998D8986A26969DA22C46FE165EF
-:10CDD000D751CCCF6623C62049C9720DCB07B62DDB
-:10CDE000D7BE69B64487D0D9304167AB3BA82FEB9B
-:10CDF000C9772F64FFCF7430FE5B426F782B4CC62F
-:10CE0000A9781CB9838271A34BF2397D15A4AAA419
-:10CE1000778CCAE2EF9F3307D7B35DF017F9F14D76
-:10CE20004C3B129D8AEF947AE97DD2319D0CEF93B1
-:10CE30000AFDBCC0E0E7BF29EB06D2CF6FBAC23B08
-:10CE4000D7E3B3847E9DCA52AFF21DD2295964D76D
-:10CE5000FEB1EF90F2F76B478BFD9E2CE829DDA524
-:10CE6000B2A1B1F89EBB6646E17204DFAFCDC177D7
-:10CE70005E7D94BF91F9291DCB02A4478C074184A4
-:10CE8000F99B19A37BFB872326CCC43B87A3FA8F8E
-:10CE9000EA81DF43DED95B90154FEFECFDC919F253
-:10CEA000CEDEA1D12EBABF7AC89E4E7A28EE574B5D
-:10CEB00088BDF44D90CF3D607D87417E63FA3AC8CE
-:10CEC000EF1E2047DF00F98DF99B3297316C37C692
-:10CED000A58F7B92EDC73A47C141AD63F88DCD79FF
-:10CEE000A52BC2F7AD985EA3912EDE8AB96634AE4B
-:10CEF000F7AD98CE269EDAAC9466BFDCA33D3D59D3
-:10CF0000EE87E07863683C237C253C8D7094F0FDCF
-:10CF100017E0F9607BF05C84E708B4DFDADF8F4A62
-:10CF20004C43FF26E7B3E51129E23DD2B773D43471
-:10CF30008CF71D42F31C5E752D33A3BFDDCEE1746B
-:10CF4000B29AF910BEA7710968F036D8F79879A49B
-:10CF500029340EFA659BB615E9EEE44695EEEB9F93
-:10CF60007F318CEC76A7FCDC2EB9D8A43D87E56533
-:10CF7000AA6BAD1BF5CDB754FE8EE8F78753264557
-:10CF80005E05BD6EE1EF1C94D9C7B48B4F79BEAC82
-:10CF90004CF310BF6086DFA3E86AE3EF41C877294E
-:10CFA0003BD2B7E4EFB874B5717E2DF1BBD12AF452
-:10CFB00000E86710F0D9E45F86D379EBB104CF21A4
-:10CFC0005C1F9C63E8FDA996AE91249F0E89B8B8BA
-:10CFD000E181BEF4DE5A81F8DD8137C47BEE8744FF
-:10CFE000BCDC910CED6D6CFF86EB5057B43F5CCF11
-:10CFF000B81FE846077F3FFF6ACFE71F6689F8A1A1
-:10D000001C967355BF9310AFD27D8AE12C83FCF040
-:10D01000A370BEC8E7DE9C6D463919F23B09B4AE79
-:10D02000FF6BBF93C058B38AEB4A762AECB1D4ABFE
-:10D03000FFDD04559CABE4EF2714F0A236BF9BF054
-:10D040007854018FCB77CC6BF7771392C5BBD6CCD6
-:10D05000C5E586FCDD84FC44BD1C19E51C71C44992
-:10D06000A9DECE937C85F8B1F86C213FAE16FFE5C2
-:10D070008CF0DF1A67DA89C73F0DD7FAFC12EDF39F
-:10D08000A33A59DC7E575B3AF877FB5D948EF064E7
-:10D09000FCBD14239E8CBF9F92AC9699E91D4881DC
-:10D0A000A7E9F017F174BDF87D8BD1F8FB16EC7F82
-:10D0B0000E6FE30C78FB96AD1D88EF965E2CE47C3A
-:10D0C000BD23B91F9EEA99940DFC6396B01F49FBDE
-:10D0D000888CCB35FE7E92B403C8785DDF488E6FB6
-:10D0E000DF8908F25FDDAD3646A29C3961E2BF9769
-:10D0F0009411AF69D8FF1D59950AC223917977CD54
-:10D1000083F9CFFA8D2D05F3B3BAF3F7225916FF41
-:10D11000BD2039BF59C93C9EAB385BF06F378FDFFC
-:10D120002ACDE676B248B793E2CC0BB398889F65D8
-:10D1300029B3B2913E8F87F542FA5BCFED818DF82E
-:10D140005E65A7E07B95A8A7A35EDC4DE8A5351F2B
-:10D15000DBED9C0E994EFEF7F6DB7571CE7DB73B8D
-:10D1600075F9ECBA445DFD7EFB5CBAF2DC40A6AE1C
-:10D17000BCFF31B72E3FB061B0AEFE351F7974F9F8
-:10D180006B1B0B74F5879CF2EAF2C9ACF95184EF82
-:10D19000E6EC34C25B7745D8495C1C1FB3EE4EA069
-:10D1A000FB4AF2FC21E3DE3541CFC6734D772BD726
-:10D1B000EB6B92183FB7DAC5F994E9CF379A885BE1
-:10D1C000977A3DF3E9E3D665BC7AEB39489C73E482
-:10D1D0007922245EDD83F397F1EAAD7817EF871AA1
-:10D1E000E9F5856CE15733ACA3BB95DFAFABB9C7AD
-:10D1F0004AF784E4FC8CF33A2EE298B7DADB7F0F2F
-:10D200006A7F36B7AB44F6F0EE417A7D12D815C18D
-:10D21000B3CD78EE46FCFD819A7BADEEE5AE2B8F6B
-:10D2200037AB1F5FCF4C7C37378BDE5FA57B8172BE
-:10D23000DCB7057DEFE9A7B4BBBE59D13C3E8E45B6
-:10D240005BE95E4BC7E371B8265AD90A7AB74ADC64
-:10D25000F3B87D6DDD035834D35A6BE10F0FF82D11
-:10D2600068471B3712F4C45CC0C3334B1E72805E28
-:10D27000F4649599EC621F3C7FEE16D0305BEFEDC5
-:10D280007487731AD2C938C43FF47B533F1E9FFE84
-:10D290006D365F5FBEFA7DEB7D0B9B8EFF33E2FF49
-:10D2A000EDD01DD1A35CC7FFD6FD0B49BF4638C9E1
-:10D2B00073391372AD879897849FDC17127EF2FE44
-:10D2C0008B6B91C5BBD941F7680A302E4FE2EFF660
-:10D2D0007E9C2E7BE57078603DE4471DD5CB57B32F
-:10D2E000A2D15FD0C25CD1CE2BD8CDFF97EEA510D6
-:10D2F000FC3BBA4FD7119F68C31F3AB85FD7117D67
-:10D30000D29FABB86717C22778BC94C087BF878904
-:10D31000E2125647EAF7F1B41C2E17FE2EE5850FF0
-:10D32000CEE77A3EC1D0FF51B352157C625EEBEF7F
-:10D330008DE0F7B92B2DA47733E67D18E334FEBCDE
-:10D34000DE42EF3C0EF730D26F8A362AFE4D4AF0AD
-:10D3500077BE0A7D86775AD4EF493FFC76ADE2C4AA
-:10D36000DF8B98BD465F3EDFC17FA764AEF1BD1A7B
-:10D37000E98FBBC2B9BE2047E8E56EE626BD4CC4C6
-:10D3800051148B3A46BDACC5CFFD8D782E57B91DD3
-:10D390008BE2EFA4DC77A1BF2BE41D16806B78260F
-:10D3A000CAF115E676E3225BE1DA41DCC73987880A
-:10D3B000FB70F0389796DD61DC3F2CFD70A2FE39E2
-:10D3C000DF252AC7FAD8DBF95C1EBF22FD6F46FFB6
-:10D3D0005E8BC344FEA996DD9114E7807EAF68A002
-:10D3E0008733A65D09835383F3D31A559DDFC8980D
-:10D3F0006ACBF6D079F2E11EDAE21C8C6F37BBED16
-:10D400006EC8DFE73844EF788D137630E37C5B7FBE
-:10D41000F76F287F57A7C5C7F5DD9602FEDE09F036
-:10D420004786FB49C6734C64A0DD415A18B896E69E
-:10D4300073B5FEAFC99773B9FFF7F2106AAFADB914
-:10D4400096F2DD573CB008EF194DAD996FC1508091
-:10D45000C64797E68743D3C66EFEE5E188B7114A13
-:10D46000BBFE8B0773B85C6934DC5B90A9DA8FEF85
-:10D470001B573FC9CF453CD73285F6C36285C9F8F3
-:10D480002EE2E7327FA956E4F3797EC94A9E6F14F3
-:10D49000BFABB04DD85B70DD98E2BAD12EB043D8A7
-:10D4A0006370DD98E2BAF13BF22FCC23FFC23CF26D
-:10D4B0002FCC23FFC214F9177E2F62DE945C95FBFC
-:10D4C000ED4687EC0FF4DB8D0ED18FD06F179A47A6
-:10D4D000BF5D687DF4DB8596A3DF2EB41CFD76A1CD
-:10D4E00079F4DB85D647BF5D689E0DBE3198477ED7
-:10D4F000E799A8CB4F06FD7F74C8FE46BF5D68FF65
-:10D50000E8B7D3F5A72DD2B5BF8D55E9DAA3DF2E45
-:10D51000B4FE1D558ACEAF7787788776F68638A217
-:10D520001F5FAAB701E9FE4F11FFB8CB82E745B5EF
-:10D530007E013FB785BB399E6B0B38DE4DFC9E8567
-:10D54000D23C83F0BCD4CAF3F93CCEDB483FE817A9
-:10D550001B6DE17E314CD12F8629FAC53045BFD8ED
-:10D56000E89EDC2F8629FAC5F03BFAC53045BF1886
-:10D57000A6E817C314FD6298A25F0C53F48B613BBD
-:10D58000F48B618A7E31FC8E7E314CD12F86DF4F49
-:10D59000A07FCE129C17EAF33D74E74AA043DDB9A1
-:10D5A000D2A9CBA33E1F5A1FF5F9D072D4E743CBC3
-:10D5B000519F0FCDA33E1F5A1FF5F9D07C748E8B5F
-:10D5C000F621EAF5A1ED50AF0FCD67D7FA5E47DB44
-:10D5D000D9F88D178E60DA18A93CA900CB8879613B
-:10D5E000C534F45F3686292931C0392DCAFDD346AA
-:10D5F0002701998838CA1CD66CA2DFEBC3C323C6A7
-:10D60000390418C5AD667F9744E569F2FE1DFE0139
-:10D61000BCE7EE66F47B34D2BF2EDBBB9953C55416
-:10D62000D60FE6DBAF671C5FD623FE19320FBC694D
-:10D630008DF13EB94B1D791837BB4DFC5EEEB6E55A
-:10D640003CDEDA4857F9425FDA66DA7508EFD33420
-:10D65000172A74EF3AC3CC8E59F2104E9579A84729
-:10D6600064F78B11EBAABC0E7F774CCE5BDA41815D
-:10D670004FD0FDC4A1CD0DA3A2A11FCD37827E1F27
-:10D68000679C95EB0FD80ECF957D7D8A6773087DDB
-:10D690005F23F471CDC7C77FE6A909BC5D386FF77A
-:10D6A000CC535104C7092B148A3B1BBA8379F01E53
-:10D6B000B447CCBBEF8E808AE315AEE0E3C97E0BA6
-:10D6C00037A6D0BDD042D6381AEFB5B0010A43BE56
-:10D6D0002DE106EB3B82EBCB80AD8276EC1F7B9F8E
-:10D6E0006AD880987C8C4764F58CDE151D3FE03D40
-:10D6F000DD7A09ED83A85F926BBD7C0ABDE33CC176
-:10D70000B76C39826FBC6FD1EBF1587F0B73A7BA3E
-:10D710004814D1FD63399F3E9E5D26108B2C8B35BE
-:10D7200098C214C4373B1C17423FB0F3A720BE7306
-:10D73000DD167A5779A2D969A1773A3A88D7B9E440
-:10D7400090F13A067DC1109753B3F4A314B4372F68
-:10D750008E3491DD64F19E08D21BB40D0AF135A917
-:10D7600007158A78BF4B2B5E8F9F8670DF65A1FE01
-:10D7700064BC4E79BA3FC584F713BA6CCA8955495F
-:10D780000F58D20FF500DF4BB70CC67A2BF9BBA2AE
-:10D790009756ECE1BF4B2AFC3BF2774EE788F8AF97
-:10D7A000C26C6F34C6C3C8DF5393F764E4EF984A82
-:10D7B0003B4FE1DBFD8F227E0B9F10EF7EAF29A454
-:10D7C000FBEFC6B8AB52A1FF2D5861A1B8AD05065D
-:10D7D000FDB054C4655DE9F74DD7F633E887F277BD
-:10D7E00072441DA676FD3DDA85E5BDCF9916CE07BC
-:10D7F00066EE62E4AF9AB96C9409DFAB667B38FDE4
-:10D80000CC5CC6F59C99AF78E8FEA6D41BDF15FA70
-:10D81000CCA4CBC904FFF785FE3215E35501CEE356
-:10D820001AC3441C5B12A5D32EF3F8D5490ECE0FB4
-:10D830001AF7F377375A7C36AE571D61FCDD380393
-:10D840007D4E34FB4D78A1D13D14E813F2E3511F16
-:10D8500082FEA6A37E1487F49E9A4FF190050ADDFE
-:10D860002332D2FB384BE5EB186F3B6E2B73FB5822
-:10D8700028BD031D637F3E85DE63D0C43957D2B116
-:10D8800091EE674508FB9483DB9F5AED14A8ABD259
-:10D8900023EA7F9A86F1C4B3D066D88596E1C1B8F1
-:10D8A000BDC82C5E7EB4DF9FA6ADC0BB1F1DD82DAA
-:10D8B000D49F58091E9A7C77A2033B02DA0F905F2F
-:10D8C000DE7E67AEB528845F3E9C3BF22BF7C0201E
-:10D8D000BE8B0CF72917DFD7937EFFA823BD7836C0
-:10D8E000C015F7C7ACE8C6BB8052D99FFB31CFE863
-:10D8F000C1F8FB92727D2C80F198B78A7C6C9DED0B
-:10D90000A3350E820BE59BFA9D9F867134E5F6C622
-:10D9100031487615599505189F1DE4539A273915F6
-:10D92000F9546E007F8FEFB8944306FB44AC9BD74D
-:10D9300037DA29666771FECDC47BE39FDFF7F24ECD
-:10D94000945B72FE9F5BF4F76A651AEE16F2A3FA17
-:10D950007FE65E89F13EC9AF92B5BFF783FE1F3601
-:10D96000F1F713BAA8B54CD88BC8AF2CF90613EF52
-:10D970008E04F1EEA1F78DFF0B290E70D50080000B
-:10D98000000000001F8B080000000000000BED7D70
-:10D990000B7854D5B5F03E73E69564122621210F1D
-:10D9A00048980402A94698BC20BC0F9147B068076C
-:10D9B00092286812268447B068236A0D2D2D139291
-:10D9C0006040F0068D82D4C780CA45A51A955B4198
-:10D9D000693B48B56A513148F5D6DE303C7DB535F6
-:10D9E000E2F5AAFFE76DEF5A6BEF9D99733213F0E2
-:10D9F000D1FFEF7FBF8E9FDF669FBDCF7EACBDDEC8
-:10DA00006BED93960D8A735D36635E87F5849200A5
-:10DA100065BB12B08D618CF9666AC13C46BFBFE53B
-:10DA2000307678B48BB114A8E4F5DEF3703263B5C8
-:10DA30006BAD6C233C7A6014D318D41FF891D5EFEA
-:10DA40008371AAAD475EB04399E4E6FDDF69BAC3CE
-:10DA5000C24C384A20D705FDAE6E8C716F84F6BB80
-:10DA60000B3C896E688FCB775BBD0EC6CEBA19F5BD
-:10DA70009F91E249C6E7D76D3A78FF5BF0E8070768
-:10DA8000B2ADDE7CC6EAF615AC4F73E17BDE74778F
-:10DA900009D41D4EAB07DEBBBE35D1EA82B2369546
-:10DAA0003576E5E33CBD59F3E361CDF89BC658817B
-:10DAB0005B610CFA7F50C0A8FCC8C216F07E1D96B0
-:10DAC00079BA7E266A671D5B35FB108003DF3ACB8F
-:10DAD00034339FA990B1E1562FD360FD2DE9CC8D51
-:10DAE000F01A0ACF6D85BC3D2629043F23DCAC8C9F
-:10DAF0006926681F0AA5B53004C74C6857E1B925E7
-:10DB0000EFE442968370638B703F723DB25C2CD61B
-:10DB1000CF16D84D0CD6B5D40EFF862166AAF9B320
-:10DB2000528B195BB54571DAE0D11287EBAA095027
-:10DB30005FF29285AD83FADC2497351DEABD70BE95
-:10DB40003BA1BEF8A602AB0BF65D8D6701EB58B2A8
-:10DB50006D02730D86D20F6551FF796579CD9643BD
-:10DB600099FB5D787C9AD503F05AE2D4AC49F9A1CF
-:10DB7000F6FA0E45F33BFAD7E7BB55DA67351C29B1
-:10DB8000C2AFE6A66CEB6207D65FB2ACCAC77DB97E
-:10DB9000685FF23DE817C07E7373D88B0CD70DFB1E
-:10DBA000DA99CDE72B0C1B7F318E1F363FF45FE4F3
-:10DBB000C17DB9E369BE3A27EC3B1B4B27AD13E0AF
-:10DBC0004070EADD0CE3B9681E3A8FFA80DFE2C6E6
-:10DBD000F598615EA85FEDF45B709EC5AD055606D5
-:10DBE000A577139FC7DB9E68BD04EA7566A735134A
-:10DBF000E789055824D3FAFC3BE16896005C921C47
-:10DC0000380F5B34DFD11F3E7562BD4B3A12AD4B0E
-:10DC100075CFB758F03C16C27ABA229CFBED78EE6D
-:10DC200029B89EE95686EF9B35AB1BD723E07BE6F0
-:10DC300086988D6C10BCDFB9D5920DF59F22FEA69B
-:10DC4000E07B1CBFE6E6047215DCF70D316E5CE785
-:10DC5000426707EDAF0FBE77013CE0F952A787E0BE
-:10DC60000B78E1630087259DFAF30CAD87C37749F4
-:10DC7000671DD1DB32B3D7EA0C5FC7B683B90AC0E0
-:10DC80006521D0B702F0674E6F16E2CBD9BBAECAA2
-:10DC9000A27DC23A11AEF16ED7ACB462C213C263B8
-:10DCA000892FB5459C7EE57CBBDC669A6F97D8577B
-:10DCB00074BAD45E4C43BA84F35DE78A4E97560635
-:10DCC000E3C1BCD6258ABF45E94FA7923E255D4AF0
-:10DCD0003A95F47BBFC5134853427CA676106B7C03
-:10DCE0002A029CCE0A3E72B5385780EB6F10AEB256
-:10DCF000FD7571AED5397A7AC7F170DCE7647B596E
-:10DD000020F786FC507F396F75127F0FF11EF1ED01
-:10DD100039011FECBF8AFA0B78097E51DFC72FF655
-:10DD2000B40D417EF1A4E2467EB16AF3A1CC5B0062
-:10DD30006EAB7E1E879C977DB8F2E1EBD3010ECCD3
-:10DD4000ECA77393EB5AFA7901F189659F4FE2FCD6
-:10DD50002210995FB8F2BC87916FCBFA923B7F3E5D
-:10DD6000CACBF94D00F9CD1F7FFEDCB189C84798B9
-:10DD7000DFE2B924B49FC5ED6F58EA1CE1F0E3FC83
-:10DD80006E63DEB93A3CAF7A87D5A5C2A3FAD63A1C
-:10DD9000E2BF2C8DB97395D0F91BF1A2AE55D1E835
-:10DDA000BDA6717EF55BE4D3F59BE6319453F2DCBE
-:10DDB0006062C6C6C13E1987AF5CFF4762FDE704DB
-:10DDC0007FBB5AE0F7D50DD3ADE9C9B8DFBA22E081
-:10DDD0008C6CA178BE7089FE79DFB939FBF8FC7ACA
-:10DDE000A497735DFCDCCE6DB210FF39B727DECF90
-:10DDF000607F1FAE7AE6B52BA1DF0777EFC862AA76
-:10DE0000FEDC58113F372C97C3B9B1C111CF4D2D4E
-:10DE100008E3C3CB1FE0E756FFF8ABFFF1AC8BF68E
-:10DE2000CBF9DD669B1FF9F1E2AE27E91C17B66F4F
-:10DE3000B16443BFC105D93A3E5EDF58E06400DFFC
-:10DE4000ABDB7758904F0C2EE07034D203941A0B52
-:10DE5000A333944B4A12E25F301DF14FF647FEF8B0
-:10DE600024CC73D30D31096C6C689EC9059CCEEA35
-:10DE70001B139370BEFAC6BADBD998903C30EEF310
-:10DE8000540CA797C5301ED2EDA9E9EEAC55849F7E
-:10DE9000A68872B7A8809FE3CF00DC31800F43E3F0
-:10DEA000BA1E41380CFD41AC1BF9C7C891413FCEA9
-:10DEB0008BF88DEBB602FFB443BF912B831FE33A7F
-:10DEC000460286E17B58C62751C986407D272CBB78
-:10DED00014CA1C95970B0B389E407B00DB5972B01F
-:10DEE00004F72FF1DB88BF56F6507B0EF2B164E6E3
-:10DEF0006E7185F0558E23F155E273B4FDCD2BE0A4
-:10DF00007CE57CFB3B95CDE1698D85FD257D85FD1F
-:10DF100001B2962685F625D7C7F2605DA83FFEF8C8
-:10DF2000921D1B619E53CDEEAC46C740FBED9C3964
-:10DF300024C27E8DFB9474B3C4CE691AE866501077
-:10DF4000D67DAE63C420943BA714906FF0DEA91B6E
-:10DF5000624CB87EB9AF5D6BA133AC75F75A3B9597
-:10DF60008FAE05C21BCDD89EB569547F7CAD8BCAE0
-:10DF7000AEB579F4FCE68224BE0F168C473D13F44F
-:10DF800001CE0F029C4E7A9A46D0BEE473A917F4D4
-:10DF90003883F14961FCFB74A3909B2CB819E99B71
-:10DFA000358D600FC3543D1DA7E24DF9889F7C7DE0
-:10DFB000F2BD9B2CBDC40F59BCD5F530905CDC4D37
-:10DFC0006FCC4C85F99676661728F05E4D53514F0D
-:10DFD00013B4D7B4A6BA916F2C75B8D6A35C5CEA1B
-:10DFE000CB76A35C8CEB2C38BB0DDA97B65EECC617
-:10DFF000FE3729CC83F405FC9321DC96B1BE9F66E5
-:10E0000007BEB65CF0B5E5C82F015ECB9A0E8D74E5
-:10E01000C2FBCBDC310528DF976FE376C25C136B64
-:10E0200057500EB77866211FEBBD4771A3BEC9EEEE
-:10E0300005FE6A0FF1577F9EA7A300E5D297807F68
-:10E0400030FE45288355DC579786FB60A08F3CCC7B
-:10E0500070DD1ED2EB07097CE9E93C11EFCAE7F05D
-:10E06000467D9D793513F2DD5542AE0DB7F69EB86B
-:10E0700015F59978937B27E797AFBB709F2FABCCB3
-:10E0800046F246F417FC74F84F4BEDC8DF56C5E76F
-:10E09000A4925EB54D25FE28F1A741AC79E98E8AA0
-:10E0A0002188374BA11DE5DD767C082C747DE7A522
-:10E0B0004310AF966C9979B70FE4589680E3697373
-:10E0C000701E9ECF7B3B52939A512FBCAE6514833A
-:10E0D000F6253B6ECDC2F2BD1D310B90DFCF70CE69
-:10E0E0009B9108FB5D766F62811A26377E2DE8F1E1
-:10E0F000DAEB2E4D457B60E55F0FDDEF1C01F3038E
-:10E10000AC11EE9F76C5F97DD065E5DA7D592AD050
-:10E11000D85F6DDE67916F7FDF74E0CA09C8FF15B5
-:10E12000FFAE74EAEF4A7546A0F73EF90AF8EE0230
-:10E130007CBEEEA76FD3387F361DBE6221BCBFF216
-:10E14000BAA713709CEFDF75749C139EDF3DD2FB62
-:10E15000229ED707CA8E5D4E144CDB768C41B9FDEA
-:10E160005B6147CD4DF25CB910E1FEB24A708F366B
-:10E170005FC33E85E02BEB35FE41A4CF7A03CCEAAA
-:10E18000C4D2C9485F7E4F654DA80F48BD463EFFCB
-:10E190008380CB7B833AB2102F56ECDA9A8572E5F6
-:10E1A000FD785EAFDE75D52BC8A7BC0FD9B8DE6E83
-:10E1B00066A427D7FBB8DECD1A805ED343F39F2E2B
-:10E1C00088A3F5AFD856A4938780A1F4FC7D332BA8
-:10E1D000C7750C6FE92D40FDEB1D7360299EEB3B6D
-:10E1E000A0D7A27DFB6B21CFDEE95067E1731F1042
-:10E1F00012EA23EF743C1D3FD211D2E3E28BBB0243
-:10E20000C8E7AEDB9B58A8729422FCBADE29F993CA
-:10E2100063D6D064D2C79C88A7ABF6BF308BF13AE7
-:10E2200008C2E8F0BC56E8617DF5BD4F925DB7725B
-:10E230000FD72756763DF962068C73FD3EA14F0835
-:10E240003DE53A41CFD7EFE570B96EEF096B7DB888
-:10E250003D9297B47E286882B6C2410BEE72A1BD92
-:10E260000D8B9808F8DD655AD80C4C3CCBEDE47A60
-:10E27000A5B997F4C38D79DD64975FD72AC6CBEB38
-:10E280005E9F43FB9D37385C1FB2175A08AEF27D84
-:10E290008007BDF7594CC218E47F81EB62DB51AEB9
-:10E2A0006BD73BCC58B65CE720397F6FA329CF0CE6
-:10E2B000F0D5945837EA714D76DEFF96D8849D5894
-:10E2C0001E88E5F5CF62B2484E7D66F23CB90CFA85
-:10E2D000DDA21E896123F0C87B0F99A03E2AC53BB1
-:10E2E000BC10E64F65403D2ACA8F8082ED1FFDF2CB
-:10E2F000DD225CC7D4E1C14F182CCDA2242E9C0195
-:10E300007832BAD0C9F97B7EB008F13DE579CEAF5D
-:10E31000EFB3B0769477CCEC61F3E17900F9179E16
-:10E32000FF17263FF2E3034AE0C170FDABBA90EB62
-:10E330000F1E9BA35D81752ECFF6BA711DDF532C86
-:10E3400097A0EAC25C6A2E8EFF9185B74B3DB64C12
-:10E3500030E14C618F5933D21CB8BF16012F45D321
-:10E360005813AC635DFEF3F5882FB7F5DA990DE627
-:10E370002FEB8D25BD3633A39CE45B8B808BE24A6B
-:10E380004699C39ECF37F96CB0DEDB98DD8FFD99DF
-:10E39000DDA0FF9A62347C4F39F0DB2F90DF0F5500
-:10E3A0003F3E3408FA0FBD4571B7409FDA7367EFFF
-:10E3B0007B9DA1FDEC2F40F82D4DF15E5608E7D96D
-:10E3C00073AEFC8417CEFB366797DD9DCFC70BDF9E
-:10E3D000C781D55F24249942EBFBA8F7ECCF9F2996
-:10E3E000C6D24E72A8EC80CAFD4D86F57C94E6320A
-:10E3F000D339F5DA0326ECEF30F91505FB1F7A1B4C
-:10E40000D75766770454D4E3ED963F85CB1976242D
-:10E4100033F1ECC5245AD8DF405918D2C2CF6FEA85
-:10E4200020BD7DF98342AE3FFE409C9384AF841BA8
-:10E4300073692C5CCEFCCAB1AB86FBB1381DFF40C2
-:10E440003C3FF7790EE917E70E809E1141EF94E506
-:10E4500051D433407F08E468B7149684E46C9594F3
-:10E46000BA420EAB62DC2A01AF2A8789C3A7D20069
-:10E470001F813746BC309EBB3C4FF6A3232F0CCAEE
-:10E48000A673BCE45F189DDF3A5C47CF1787DB803B
-:10E49000DC5886AA9DF066FF239E5F206634EA154D
-:10E4A000779948AF40BD0FF544C93FBCC807C6D2F5
-:10E4B00073AE07E631E21BB56A2CF9198D7C43F285
-:10E4C0000B6F2C9463906F74103FB845ED7DC1A421
-:10E4D00084F8C4F0F2E02528877BC0F4C7F6A0A931
-:10E4E0008B9EBF549843F8328C1D49C7E760AF94A8
-:10E4F000A01EA8DA1FBCEF348894CE0D9C3E5A2C87
-:10E50000FE7B96217FA872B851AFFBC86FF25960AD
-:10E510009D9D899C6F74AEC82079FE11137C648127
-:10E5200095F8C82493C947F6D6C20CB2B7FAFAE7F1
-:10E53000BAC8BFFA8BBFAAA3B661FB3C3BC9DD4E8C
-:10E5400094C750EFDC7C09B53F27F9D20ACE973A41
-:10E55000E769E9B1D83E6F8809E7DB9EEC7D1ECF05
-:10E560003D43F53F1283FAE4F763D9C3F0BC335B54
-:10E570004B47797BB7E259B814DFBF84AF3BB83063
-:10E58000F6F15DFC7802E84FEA698ADFB9314C3E6A
-:10E590001D1ECDF9FA70DF897B105EBE329687FAB8
-:10E5A0007C0FE2E7D8D0798155CE9A9242E7966CFB
-:10E5B000383789AF3E0B9C5F323FBF754AF4F34B4F
-:10E5C00016E7A734017E13FFE7E7738BCAF93BFB1D
-:10E5D0001518E0507E9CE20DE27E5B6E8073218117
-:10E5E00018BC19E175DFEA780DF7D163620D5D1192
-:10E5F000E8F643C11F184A63A08745821E1649BC2E
-:10E600005D63C0DBE0B0C4B371026FE1FDE7E23CE3
-:10E610007FC679FFAC1C1D870F0FFFB7BA20D23C15
-:10E62000FF25F8CF41BBF7D34292AF653A7DF57035
-:10E63000C1BB9928A7D8978786A1DC7D2AD9F33951
-:10E640008E1B33B297FCE63DE9BD16DC67CFC20FE7
-:10E6500032512F5AD4F45BA2AF0B5DE7BAB85A0B14
-:10E660008E9358996D0942995A99FD02E2CFB139BA
-:10E6700036972D821E7270CEE84CD47FBBAB4667B6
-:10E6800022DFEB86033C82EB33BBE291FFB17D35A9
-:10E69000C4C7AA041FEBAE1CC19F0BBE19F67C7346
-:10E6A00031EAB50E933B5C5F3096EF03DF0C00DF81
-:10E6B0007C17EC332CCF807D1600FDF514D86758FD
-:10E6C0003F01F61996C7C13EC3B27BAD9BDA5B2A08
-:10E6D00047EC0BC2397FDAAED0F8E8BF8DA4175FE4
-:10E6E000FB90CA02123EF07FC3BD712C9017AA2F77
-:10E6F000EB1CACAB2FD93454575FDC3A4257977AB6
-:10E70000A477CDC5BA712BCA8B74FDD6C58DB1E087
-:10E71000B926961770B8971710DCBB2F8F02F7CB6E
-:10E72000C713DC8FCE199F89F03C8A7047FBCDEC74
-:10E730008EC77390709F2FE63C5A5EC49F0BB887BC
-:10E740009E570C28A73E4478DB10EE762ADF4578EA
-:10E7500013DC39BC4F21BC6D08F73C2A8F23BC4722
-:10E76000E3B800EFE2F3C37BE51E5507876B1FD2CA
-:10E77000C3BBE1DEC106F80FD5C171C9A611BABA93
-:10E7800084F7E2563DBCBD6B8A0CFD18DB0470A813
-:10E79000C07F001D1C2D994D7129B39DF9E280AFFA
-:10E7A0002422BDC1FACD950AD78FE0D70174381F56
-:10E7B000FF01F46576F0F6D6858A1FF912EA4468FF
-:10E7C00057005C0371406715CE5167902F5D851C23
-:10E7D0004C45BBDE4FE5352C40F459C382545FC431
-:10E7E0007AB3AC505EAF06D6A3FFEE55BBF7C62298
-:10E7F000A0FBFF9AF3468F8244E9AE1B8D74CE1CBA
-:10E8000049646F463B27E0945C1FC7AEE3C4BEE09B
-:10E810005789FC1FDEEB8E1B73F3CD700E1FD505E1
-:10E82000C7E1FC2BEDDE07924D345F7311F2258BAF
-:10E8300077F46078FE6AC9F84CA47FE649D1D949DB
-:10E84000D1E6DB829B0538D495039C148CC371B848
-:10E850009CAEE27039B8C566457FC6E90D16F25721
-:10E860006E8DCBCA42BC3DDD363B0BF1AE79CBE8B9
-:10E870002CC4F7F9EDB3DF47FE3D539D5B8BEF9F53
-:10E88000ECE078CFD80DA477DD2CCEEEA48BB903C5
-:10E89000D05E3527DEED83FD787DD909B45EA639DB
-:10E8A0000AA05FBDD8777DC7F2B9389EDCFFE24D84
-:10E8B00036DDF97FAF545FAF62D6109E65E3395BFA
-:10E8C00043ED78FE6AF520EF007674D31F77BCF233
-:10E8D0009BB0F11E2B8A4F46BECAC6B3F17F53438D
-:10E8E000EF4783EB676BFDAFFC26370457894FEB8F
-:10E8F0008B3C7B111FE031C5DB8096481E5CDFE757
-:10E90000D73A9080F0DB12F7ABDB27215CDEE47EA8
-:10E910008EAD71B5C43F3E44BE9D8D7CFAAACC60DD
-:10E92000185F90EF07053F3DF6F3AB888F1CAA4AAE
-:10E93000A5784CF75EEE5F3E2EE8BEBBF2AA9A9B2E
-:10E94000817F76EF5149CFEBDEF7C90BE8A7E9EEFF
-:10E9500052DC02E4A6F071BBF7013F477EEBB150F9
-:10E96000FBC13D4FD33ABF2D7E5EB95FF0F36D7CA6
-:10E97000FEA5660FF117E65DA0DBDFDF8BAF9F8F93
-:10E980009F1FB3703CED3EA692BF8DF9B42379432F
-:10E99000C2F0B39CE36773958D71F9CAF9CCFC4A58
-:10E9A000A003D4F399AB046DCA0FF755A490BCDC57
-:10E9B000643989FAB413FE43B96D846315339F0C2F
-:10E9C00086E1EFCABDD03F6C7DF3B13D0C9F8DF861
-:10E9D000AA1403BE5E1CC2D74FD99759D61CDE7E3F
-:10E9E000644888EFE12F9CBF48BE25F117F8562DEB
-:10E9F000F235E02B8E62C0DB1F1666FF32A884F171
-:10EA0000950BE4635BE2FE4A72706BDC5F098F8FEB
-:10EA100056093C063D039F775FCEF50DE65F40F457
-:10EA2000B048EA11164F3CFA498FAD199C80ED278A
-:10EA30005A2B88EE243D19E73B2EF04FF65B64EE2F
-:10EA4000B5B823C843EF1A3DFEB0DD0B08DF6F36C3
-:10EA5000E059B4F18DFDE53C8B0CF15EE33C938B0A
-:10EA600085DED9557341F32119F6BD4FFA6D6C0857
-:10EA70002F55E4039FC50749FF5AA0D3CB8E978F2C
-:10EA800027BDEC68E52711F5B3E3959FBC3A1EE975
-:10EA9000ADDC22E8BD81DEAF10EDC675BC2BF4867F
-:10EAA00033827F9C12742DDBD51D6D43AE46BC5F57
-:10EAB000A3BA915F1D9B5B4478FE9EBF8AE63F5ED2
-:10EAC000A992BFA976EF77AE467F935C8F9CAFE2A9
-:10EAD000F24FE2D19FF629C00BFD631516774A2449
-:10EAE000FDC2088F68E34AFC017DF618EEF328F2B8
-:10EAF000516CF5EAE17414DF87F6F93B548AB719D3
-:10EB0000E17468CE68E24BC7770BFE0970453DBCE7
-:10EB1000E15EFDB92EEB8C33F09BC1BAF6F9555C82
-:10EB20002F93FC5AAEEFE89A1129CC71E1E72DC77B
-:10EB3000B9507CB956BC8F62F36F247F9374E38124
-:10EB4000A568982FC7D07E91A1BD505FBF403C3EC5
-:10EB500021F047CA9F1331EE9A4871BCE397D91A46
-:10EB6000C2F313FEB598FB87FFB558C4BDBFA2DC46
-:10EB7000DE69E083E77B5FF2BDA622CF23C8EF58B2
-:10EB8000A082E2D917CAE7C2E4FC93C548E741C5B1
-:10EB90008AEF4BBDEADA722E17B6C63D4E791A7F60
-:10EBA0006EE67AD1C1661BE1E15F2EE7ED7FF9B732
-:10EBB00077499F3AB47F6B42B89C9778F9FEBED9EB
-:10EBC00009E8173E5DF96042B81D20DB3FA87CF0E4
-:10EBD000F68944DFAA7BA073F9BAF64077A5B0079F
-:10EBE00084BEF07D73D7FF157BC06807CC54EF4D12
-:10EBF00040FE67B407DE7769094E828FA03B21573C
-:10EC0000AE15F0F98B454BA038DDEE222E570CF8EF
-:10EC100029E17056C26153C580787346C805595FB3
-:10EC20006A66040FAF9D91BECC3A1537C6BF304D12
-:10EC3000A514CEE54865C183E8BF92FD7F54C2F3B9
-:10EC4000A9E43CC7EE53BAD0BFF2DBD68A9A9B3117
-:10EC5000DF616E1CF155D97F996F60F9756C73E2B5
-:10EC600015388F779BEAC6475EDF8994F0F54B3DF8
-:10EC7000CDF8DE0A73C705D9D15EDF8E04B46F8389
-:10EC8000629DC1833156577CFFF7305E83FB5F3155
-:10EC9000577537C3FA576CE2EBAAF2A9EE1CA8FF2E
-:10ECA000B6E3C12B900E4E35594CDC3E70EAF0FCB9
-:10ECB0007047D16BD8FF7439972B272A2F4DC03C52
-:10ECC00038DF368B3BD7D57FBED108478CF3ECB30A
-:10ECD00099D07FFA7E938505C87FE1217BF9D8A67C
-:10ECE0001154BE8FF0E3F6359D7F5109F7739DEA0D
-:10ECF000A81FC2E9C945EB90F87262B75AEE8FC0FF
-:10ED0000AF8AC47C67BE7C82F0EDC5DD15248F4FD1
-:10ED100055F279CEAC7127203C7FB749253A3EEDBC
-:10ED2000E3E31FDC7F6BC244D8C7FB957C5FEFEF4A
-:10ED3000BBE5B509B0CF60A594C75C4EC9FC9EE0A9
-:10ED4000A61114EFFD732BB7BF25BDCB78F8A5AB8B
-:10ED50008F25D0FB52CEED59A05B7FF7EE53648731
-:10ED6000BDBF0966E372CE5180F986FC75B66CAE04
-:10ED7000FE7CE757C6E9EA8BDAF5F2AC793FE75754
-:10ED8000463D77E926D083D12F65B0F3EA9B8B12FD
-:10ED90004A917E510FC63C93872B5E48C57D74D542
-:10EDA00050BF4A1137ABEFB4E9F84155ABDEAE5B6B
-:10EDB0006CB0E3FAD975067924E1745D14F924F591
-:10EDC000B96E61AF1CB7786A22E553AC2EE17ADBED
-:10EDD00022A0DF348C1331AD6A9280F746848FB560
-:10EDE000F7D35CD0A7BB55F714D4ABFBD181410F4F
-:10EDF000AC28D7C397B97DAC54FA235CA4DF9F45F8
-:10EE0000FDBF7DB090DB3E9043F12897B41F97A0E3
-:10EE10005CBA50FFC105EBE7B5423FAFD5E9E7DD8E
-:10EE2000D825ECFD835557919FEAD8E55791BE7ED2
-:10EE3000ACCF4FE5D1F9A9A45E776C6E854EFF0C7F
-:10EE40007B3E880DC04FA3E99B27901F139FE6725E
-:10EE500069BDB0235B851D796CAEB0239319D19148
-:10EE6000D9ACB148FCECABEA6F8B5BF572C9BB4621
-:10EE70006F3F3E33DDFB5409E0872DED22DD738BC0
-:10EE8000B350EF3F34E0E750C6FDE7B7A22F00E0F4
-:10EE9000DE52C5F34EF139E6BF48B9C4A03FF28B4C
-:10EEA000AA4D17F937F2769F5A88E9720C553AEA5B
-:10EEB0006FE6754DE1759F43B4AB22EFCD02F513BC
-:10EEC000D9EE05A877615E4F5C126F4714190A7876
-:10EED0009D9014927FE8D78FE1A1755F02BC37AC9B
-:10EEE00032FB3748D798EF330AEAC74AB2096FD2E4
-:10EEF000D0A55F48E30730AF27D8328DFCCD15F69B
-:10EF0000041E9F073B7A60FC6BE6F650F9609A6C32
-:10EF10009899AF272A3E8B7EE7C3E7303DEC24D19A
-:10EF20000B3391BF654BDC180BE2EF7C872713E1B5
-:10EF300000F84EF2B5FB9756E2C307ABB81FB67B9D
-:10EF4000CEF8FB6E82E7639E70902FBD7BA9F483A1
-:10EF5000F7C687E3EDF135A74CC8977FBF8FB9316E
-:10EF60008FF1F89EEA175E81710EADA9DF5C8274A5
-:10EF7000745825BBC1E8BF9DFEC464B2BFAEBC5C83
-:10EF8000A5FCEEA3E52A43B9767453ACCE0E09F97D
-:10EF90007555C28F4F0F98A91D4D9D3CCCBF42FFA8
-:10EFA00026E66995F3737956F0B32E718E8F083D7E
-:10EFB0006697A09B4E41377708BAD960F4EFDECB55
-:10EFC000E9E6E83E301C40AEBF3EB7BE8CFCD6DB67
-:10EFD00018C5A1B3E7A81B8B617F17DBDC1684DFA4
-:10EFE000F4B9051C9E958A09E33715E50516A4F7C3
-:10EFF0008B07BB2CC8472BCAE7517D466536D9F92C
-:10F0000007D7807C447B3FDE9D89743972AE2D60CA
-:10F010004A40BBB188F8C4A4F74C3A7A2908C4EA3C
-:10F02000E8EEA2879274EDA3B765E8EA299E1C5D1D
-:10F03000FFC1E57A7A8C1D59A8E7BB8CEB8512CE0F
-:10F0400033D5C9E4E73A1E92A3D42EF511E9AF9364
-:10F05000FD015A3ABED62EE4C818A8633EDD86CA22
-:10F06000163BE64D7CDA6576F3F1AB493FB067EFCE
-:10F07000B5239D606815F3ABDAA5FE29FCF74C6358
-:10F0800086756D6218673D5ECE089F62463205F553
-:10F09000AF4E71DE778A7981AF4EB7909F8E9FE336
-:10F0A000E0B91EEAC73C7AFB200DE9AC10F184BF41
-:10F0B000FF88787F97C097E3E50FAE8B457C58C0FB
-:10F0C00048DF98A9AE5C87F1C4E37319D14957E0D2
-:10F0D000F9585C3F8E83F981CF461BA7F2E977AEE2
-:10F0E000C7F5ECB6D238150FB1A98827177DEFC444
-:10F0F00007AF21F8B6390FC5B0FE7278CC439A1B22
-:10F100008193F71E0B58A80C68C87FF2DE3BA26102
-:10F110003CF0A2BFECFEE07186F372B9D02EF0DBBA
-:10F12000C85F1F7BF8178B513E3FB66B7BE1DB500E
-:10F130007E67DD3D194D503EB2EEFBDB6F7285FC04
-:10F14000A5BBAE58BEB313EAA3BFFB9347F7225E3D
-:10F150005DF1933FECC5F55EF1C57F3860FDA35AC4
-:10F16000E219D2B75C9F719E34D6AE605C14F92868
-:10F17000F165B38FEA753EBDFD6394FBD8DF0CF0FB
-:10F18000AB687A8CE2CB69E2FDA397DFAAA830EFE7
-:10F19000DB759CAF74AFEDED9C61A1FE01EC0F7CC3
-:10F1A00092F235870E03B682EF5B7D0AC6C54141F8
-:10F1B0007263BC371DDA919F33978BF4AB2C89BFF8
-:10F1C00082AFE0350746FE4033E1599E884722FF73
-:10F1D000457E7FE7381E071FEA601A9E6FF9739B12
-:10F1E00014CC537BCBEB72935EB096DD3503ECE42D
-:10F1F0008B549E779157FED6D5782EB055B3B73045
-:10F2000034EE6EA1D7953FE7A0BCEDB7763B769084
-:10F210009E7FE40A53B87E58F6D89F9EFA1DE257A7
-:10F220005D0CE197516FE916F4D157B7B8EEBB0901
-:10F23000E0E3FBA59DDB559A2B93EC74B72B13F3FE
-:10F2400077FAFAFD44C6D3DCFF81FC7C7E751CC5D1
-:10F2500019645C492DFFB80DE97151696309EAEF42
-:10F2600019780E834371ECB7575829DFC0A7C452F1
-:10F270005E7AB478F5A171D9229EDC3896D6C11A8F
-:10F28000C763F9C98296FBACAEE8F2AA559C6BB491
-:10F29000768B957923C5950F8DE3FE90163C074B31
-:10F2A000D839387E7F35C687A39D0333FB0B29CF22
-:10F2B000D26E1F897920A9E2F1D6B89FBE8AF2AA40
-:10F2C000E7189757A94D9FAD45FA937E8BDA34D650
-:10F2D0001737D3E03D8B782F55C459908651FFAE38
-:10F2E00015F1A29E1A46F1A2D4A677FF1BE1B34501
-:10F2F0008C5FFB261FDF6A0E1C447CA975B848EEA4
-:10F30000F4A424B8F15E13FB92E7A764308E8F72E9
-:10F310007C26C6C795B3B075A7C656BF4ED7A7A65D
-:10F32000B2401CE28F62A77933D6D828AF55EA578E
-:10F33000A94DB7DEA08ED18DA7A05EFD5635B7B71B
-:10F34000D1ECEC1B375BA757919E655C877CAFC700
-:10F35000C2F6A1FD1BA667911EC6C2E719A1AB0BA1
-:10F360003F9ABE6E49B3EAF8C45B5F560C6AE4721A
-:10F37000C0953C8EFBEF101E521F937A5BBF710548
-:10F38000BD87E9973EE417328FA24F4F6A08B39BBF
-:10F3900072FABF27F3D5E4394878467BFF99E95ADA
-:10F3A000C278D2B302348E570C638A7364117C0D19
-:10F3B000FC12D816CFA7177A286891BA3C06A9572D
-:10F3C0004AFEDC23F86E303B487E4399273E0CDE34
-:10F3D000C9423D687C22D183D44F8FAFFD88E2EFD4
-:10F3E000B5A887C2FCC1751FEAEEA114974D1F395D
-:10F3F0009EFC73FA7C89B0B82BADD72BF8E64CD5C0
-:10F4000041792B3D2CD68DFCABC727F4B13FC6917B
-:10F410003E26F985913F5CEED6F3FFEF95EAF9FFC2
-:10F420003C6DB0C12ED4C7A9AA3C8678F89B7374F2
-:10F430007C53F29F5BD0CDA7A27BC943719DC38251
-:10F440005FBE26F4402B6BA4E776CC171D81FCBF72
-:10F450008B4A073B426502EBA5D2C99C945F93C4DB
-:10F46000DC5426330F9543582395698CE75365B0D8
-:10F470002E2A87B1235466B15E2A5DCC69C23287D9
-:10F48000B9A91CC93C547A9893E2E46FC607338F3C
-:10F4900002FCE65EC5C86FCF7C7BAFD1E09C7AAA48
-:10F4A000441D1108E96A26E3C8E77B8AB7CF91F5C6
-:10F4B000A7AFD1B07D3AEF5F3F7EFFCF7C0EE23742
-:10F4C000A2FD17BCBDAFFE6FD74CC7F72D26AAFF14
-:10F4D00040F47FBC585B82F8DA349ED17927166BF2
-:10F4E000CBC2EB4F16690DE1F5E325DAB5E17556B0
-:10F4F000A4AD44FC91F5B145DAF5E1F5B612AD9154
-:10F50000D779BEE99B168DF45DF8ED56C6717CC3C4
-:10F51000DF20D5DB4474B34731E3B9DA04BD59F1D8
-:10F520001C55A423B7DD86A587E7FD04631CC138FD
-:10F53000D300F68F818E82C89F000F2F51BC6D348F
-:10F540008F819F283E913F98AC8F9B00BE935F3583
-:10F55000B886DBE98C456E97F39E0FCF9916E6E7E8
-:10F56000CD098D1B6D1F46FC3D22F4BC6EA1E7BD8D
-:10F5700029E2C87DFB0E9A13CFDA43741CDD3E34BA
-:10F58000B3B3E1FCB2DFBEFF546301BA0E36D99CBF
-:10F5900028EF7A62D86B68A7F98EA90CF58CAFBA00
-:10F5A000DE9AA2594F72BE38CC49F903725EC16728
-:10F5B0007AF09FA0E75C3C48DA976E3B8737B73B11
-:10F5C00012C5BA5A66245D9647FE7CAED7E75B8EBD
-:10F5D000CC9B0DEB4CDDC4FDAA0948DF183A7BE259
-:10F5E0008F4E8CA375CC3431E4536DD2CF6BF0C702
-:10F5F0006D99B1CA19EE0F6E4BF02B18BFCC08C431
-:10F60000703F4432F3C7A01C2D779753DE8C4F75A3
-:10F610009663BD9A5D9107F5C59DAAAB1CE63DD4E6
-:10F62000F9F42AF4032EA9B6521CC3A2CD7A9FFB8B
-:10F63000FF78FE4692C0F3D60D367700E198E220BF
-:10F64000BF6D7E5B6139DABB2D8EA424C4C5A4EAEC
-:10F6500065E4376C71B85FC2FB1D3EA789F2139950
-:10F6600053B35780BEB2E3267339F2F1CC278B1324
-:10F67000D4B0759F6A3D17837190079C266A7F609E
-:10F680004D997D9903EF3182BD00E521E7490DF5E4
-:10F69000F7EDD007FD8DB7379CEC1835C0392694AF
-:10F6A0005B75781BE7D6D76D067FA3C5A017F48ED0
-:10F6B000177922E3D8383CE7B18F7E49F6EF2287ED
-:10F6C0008BFCEA65ED0AE5C7040FBAB350DF3CB521
-:10F6D0007934E5BBB4B6EBFDD1C14C9685F77DEA34
-:10F6E0003A14D257D5D68F9BF1BDE179AE741C6721
-:10F6F000B8BB37DD19467F0FFCE4873128EF5AF19C
-:10F70000C21AE111E3712161AFCA7BE575CE733591
-:10F71000A8F72FE978C383F04FD44C4433C72DFEAC
-:10F72000343CFF8DD3E7135DE23D2DD463FAE9A3AA
-:10F730009FC33AC3EE27B425E7C4E2BC21FCD5122F
-:10F7400070BFA73B8A483FDAD95E46F7018CE3DCFD
-:10F75000B69675A1DEDAB6D6DE1549FFBD2DCB9380
-:10F7600085F7B7CF6C99BE9EC1F99F39B8220DEFCE
-:10F77000BB2FEDB0B11857FFFEA7B78CA7F996E2E3
-:10F780003D6A9CB7639E15E5C6ECCEE95684DB6DF9
-:10F790006B173C193ECFCFCABCA34A81FEE23A9E0A
-:10F7A000243C71B0800FE1FAEB295A16EA17A773CF
-:10F7B00059C47C4E77A942FCFC77533C743FE54C1E
-:10F7C00066E47EC5A55C3F7FA4D445FDEBCCECB5DB
-:10F7D000E5C9640F3A915E4FB51751FCCE8271773F
-:10F7E000908B967D5FAE45FCFFA4BAFEEDE5D0DEC2
-:10F7F00036E7CAF7B01C6B6D24BD99FD5E257A0013
-:10F80000BD90EE89FD67A5DDD912964788FAA3A6BB
-:10F81000F36B7818DA1F9676356005FE6E397096B0
-:10F82000F470C4572D0C7FE9374EE8F3223F246D66
-:10F830001CDDBBA35FDB6557FA03509E6CAFB74777
-:10F840003AC7E8F3878D8BFAED0CA6C584CD0F522D
-:10F8500031407E6D2F9FAFAF9F68073354A3F509EA
-:10F86000BDDCD82ED73F7A9B9E3E9789F391FA79DB
-:10F87000B4F57EC7AF7FAF058313949771858E5E15
-:10F880002E52BB56615C85BDC5F93FD875CC13219E
-:10F89000CE15E2B3B0F621027E00CFF5C9F3C93E22
-:10F8A00089B60EABFF88963D2664BF7D274DBF2EDF
-:10F8B000D9AFA594C7C16D7E16B0246019A0FB1CFA
-:10F8C00036781FE5F7A7D5373A2F8B4017B234F2B9
-:10F8D0002DFCB9C2E23F463E81683052EA2326FE43
-:10F8E000BE16C6E7E2EFE2FAEFE96D0AE9BF1BB721
-:10F8F000F03C8A4FFD5027E5829F13AA167F13CA5A
-:10F900008E23ECDEE1B2E7DA6FBFC8A583DB128A93
-:10F910006789F6F71EFDD16BD8FEEEE33FF2E07289
-:10F920006F4D5E92C0F9D689C538CF998BADE48F03
-:10F93000C19F5DE207745CEEB7E9F070E3FE47B784
-:10F940002D46B9B3DFEEC674BCA5DBF4EDB6B4B09A
-:10F950007D318E5F3E1D9C8239F3808E8EFFE45F89
-:10F96000E97E782CF24FA4C73536BA17D68F0E4AE7
-:10F97000FBBE334278BB381487A2FB2092AE4E6E9A
-:10F980006A39A3C238EBD7585DF43D0583FD75DCB9
-:10F99000354F4B0B8B0F5BD7F07B9A2CDC4ECC0991
-:10F9A000ED5F8E7BDC576F7739FA8FD70FEFA28C24
-:10F9B00037A84CFB2DF2C5B432CFCBA5148FAEA720
-:10F9C0007D37ED5B73FC15E8737BACF7D5D2125C29
-:10F9D000FF88710ADE9731BBE8DE606BAB2906F960
-:10F9E0007E4797396624C2BBD54472BEA32B3976B5
-:10F9F00024CA258789E2A72857D430FF3E9BC0F947
-:10FA000064487E7812C2F59F58818F67F284FE3376
-:10FA100083EB3FCA130748EF686DE3712AA96F387B
-:10FA200005FE385B791C329AFE838C07D71D5FB2C6
-:10FA3000C4897CAD2D817F7F63C90CB70FEF735EE6
-:10FA4000EA60243786E3A50AD4B31CCC3F1BE651F9
-:10FA50009D5CBFF17630D267921C0E37823AB5D3E7
-:10FA6000EFA3756B9CCEECF01FC233364F6338BEEC
-:10FA7000D9A057580D7A836AA87F51AAD72398D066
-:10FA8000BF653C387EF3C07940D2AFDB21FC13A0C8
-:10FA90003FF9E8DE4829F323DE324D73250F09D9FB
-:10FAA00001E877C4F6B452B6A3252CFEA4682F92C1
-:10FAB000DF40FA25A5FF41FA39C69482BD9610E6CB
-:10FAC0008FF81598962AC5C39226009E64033B20A2
-:10FAD0007B329F29FC7AC6D7D4D39B2E2CEEF3B36E
-:10FAE000E7F9FDA05653AC7B6776FF7EC593397D61
-:10FAF000C61EC21C4998E52A3BDDC399A9EEA17B2D
-:10FB0000F75B8B4D3CAF991D71A23E903F81CB932B
-:10FB1000EC32CFC5B81FE6F06423DE003C7C16BC97
-:10FB2000BF27FCB69937E7C4A23EFC76FAD92DA8C8
-:10FB300097FBDA4CC46F241CB39B4D77201A86C503
-:10FB4000E702E6C2509C6DA3E79C0FEF0BA74EE6C1
-:10FB50007ED7D879A70FA21F74C34813F9D96F8D28
-:10FB6000D7286E07F4635779BCEE258CB7B5BB92E6
-:10FB700092F0BB3B8F27F27626CEF1EEF8213BC206
-:10FB8000F34BE2C4BEEF5622EB2B7F9CC4E54BCF78
-:10FB90007E00E420F26B097BFC0FD59A23BC0E702B
-:10FBA00083F7FFC5C7EDE97913FE50ED33939D242C
-:10FBB000ECF9981AB2D7D1C708ED7B263C58ED83F3
-:10FBC000FAFDD991E7ED98CCE7BDFF65EF70D467FA
-:10FBD00083FB017F06453ADF003395D2B859189769
-:10FBE0000AAEB62D88F41D9B33629F5BA1CD3628EB
-:10FBF000A4C76EAD36EAA97EE2579F349C7C81D2C1
-:10FC0000B4817F94003D24B2C8FCF2FCFAAA3B0DFB
-:10FC1000F5CE96D5CA7AE41F2DA0AF625C30D569C7
-:10FC2000257DB535F187D3F15C3E69604EBCEFBAF6
-:10FC300013D43EE45FE857C57BACB39B389FF13AE1
-:10FC4000B99F15EC38CFA5888FE966C247A9BF9A3E
-:10FC5000AB39FFB9D8C6F3917B121DE4374D6CE286
-:10FC6000F9C7713ED067717F3378FEB006FF211F60
-:10FC700092FAAD23DFACCB23B61AF28CCD86BCE270
-:10FC80008D13F47C28BEA47840BDEA5760FFE23AA9
-:10FC90000F00FFC13200763096CF83DD8EE56FC056
-:10FCA0006EC7B8C18B6BF3A87C69AD9B9EBFB2B623
-:10FCB00094CA6959418A2B921F999C8F2CA0901F3E
-:10FCC0004FE2D71BC3CA10DFA7F3F65F4EAC7EC06E
-:10FCD000370CDA9365FFB1847F7D755F750DF6AFE4
-:10FCE0004DE3F551CF5E5D83FE9FDE99DA4313004D
-:10FCF000EF524C9EBA36ECFB239B3B927D5F30511A
-:10FD0000DE138B6CBF33FC4482DE9FF314F1892831
-:10FD1000FE9CBB15BE8E3F4E7AF05EA48B41F3CCA9
-:10FD20001EC4E3AC1CBD9F7FF044CE77168B32EB34
-:10FD300015A08F01E02EE9235A7BCB7E4081087409
-:10FD400025CBADF16C2ADDCFAEB12E8894E774409F
-:10FD5000D055D4F11DCC651B1BA2B7168791DE824E
-:10FD600014DFFDA4E9C683282FBF39BD31B20F834C
-:10FD7000351AC9EB20D01BF273B581D39B6AE6F725
-:10FD8000336B0F73FFC84EA42FCC87437A837FCE8B
-:10FD9000F6F17AAA81DE5A8CF4E6D0D35B10E90D35
-:10FDA000C64BF471FD22AEBAEB5BA5B7CFBF21BD48
-:10FDB000FD7A4A90F21A7AB21BD3113E5BC5F7F076
-:10FDC000BE2A1DDE35D1CABFCF7189467E81561C41
-:10FDD000C741FAFC26FCCECAEC61CDE62480DFDC0C
-:10FDE000E402FA0EC1E48943043D1C71A0BF266100
-:10FDF000BAE69C88F475E57B74BF31C5C4E9B7E009
-:10FE0000D937491E64B675CF9B8D74B75A253969A9
-:10FE1000DC57EB548E6F2D0A9F174E2E3D3CAE37AC
-:10FE200042D0A56B758B62477DBC8EB973B3E9BBBD
-:10FE300032F4BD9B7F69FD4F278EDB3A3589D6E5CD
-:10FE40006A7E33D1CBFD6B6968BFD195E6C2FEF403
-:10FE500008BF2ECB101D3DE74F1CC03F7B3EFEF17F
-:10FE6000C80445F209CA03F68AFB9B322E12959EFE
-:10FE70000D7EDCA8FEC34B387C8CEFC74FE1F3B698
-:10FE800008FFAF51DF93FB3F3ADD3B1BF7A7385E1E
-:10FE9000E47EE003CC85EB9471B3BE3C23A91FFA4A
-:10FEA00098BF05F56D33A83243B8BA81E3F5E51F75
-:10FEB000093D714599773E8EBB83B90EA27C73B81C
-:10FEC00079BEC233D3B50A82E7D7D4034BCBB46B28
-:10FED00006C2AB15B3B54503B5B32F619471A1B894
-:10FEE000D6F47966CE179A14C1071CEBAD50DF9A91
-:10FEF00008FCCC857A3BDFB713F8868BEC0CBD1D74
-:10FF0000310B9D91C837908F1070B5B998579920D3
-:10FF1000C60FC9EBE00BA8970601B6774053828F56
-:10FF2000CBEB96C39CAF5881AF505CBA94DB09F21F
-:10FF30005E505CBE9BEC2F551BD87E301BECFBE665
-:10FF40008922EFBD901523DCB24CAE3B27C0F3A253
-:10FF50007B661E9D008F4BEE5B3A18C5E9F81D6D60
-:10FF600015F8BDAF150F9FD9817ED209FF6E63E2F0
-:10FF7000BB6A9467F0779433742E07269FE1FA6387
-:10FF800076643CBE620A977F32CE3A001EFB098F30
-:10FF9000459CF32BE0B1E33C78FC58143CDEF30DB8
-:10FFA000F178EF44D8D7357808304ECC6CED17583F
-:10FFB0008F86B7B36669CF0ED41E163FE0F943AC07
-:10FFC00081EC6719BF34AEA70DE56BEE007EA90D7D
-:10FFD0003B63D09E6D69D8F9327EF7B1A589DBD934
-:10FFE0003DF16E7B29DA376FA8F43DAB68EFA3DDF6
-:10FFF000ED036639730ACF8F3EB4DA169806E364D0
-:020000023000CC
-:1000000038B8BCCD70680CF3C5CDCEA0C51B8FFA37
-:100010009A87A19D614D36315F983F66ACE508C96E
-:10002000E51E90E3481F409F9CDE12F938523E4F78
-:100030005B7D274672D8945E90836174F2F2FE5223
-:10004000F2C3C597EC5D85EFA9355617E2F7B4CF3B
-:10005000416E86CD331D3491F0FAA5F674DD383348
-:100060009DD9BAF6D969DFD1B55F06F862A53836F1
-:10007000BF1728F59A39AE025DBF4411E7F86EDE6E
-:1000800004DD7866F5CB3BC623FD0B3D6232FC8771
-:10009000F4AF1AF405A33E61D41FD824FD3DD53139
-:1000A00066918766E6F9115B999DBE4B017C90BE17
-:1000B0007B501BCA13203A19630DEEBC0DFD2A0BB1
-:1000C000ED6E1F3C6BDD7F595A5D71C87FB6B589F7
-:1000D000FBFD5AF6D977203D6C177429E92B3FFEBA
-:1000E000E4424672DDCA501E1BE955E63B497F815A
-:1000F000F427280DDCCFF0D4D46CA207C97FB65604
-:1001000073FBF7674A204619C1E9D29514FA3E5DA0
-:100110001A537C73387D6B49A254453EAACC7BC5EB
-:1001200071D0CE4EE3F3B19778DE64F38FF17D2783
-:10013000F30D13FE8CCCA4909F02F31356F2F77CC0
-:1001400073C47BC345BEE520BEFEC04C31DF18281A
-:10015000D5464DF8A7BD54DA301E0E658EE28E45A9
-:10016000FFC708D543819604115FCF10F1F43825FD
-:10017000C099C7D7E42363818D625E024BE2DF172B
-:10018000297BCCC154A20FEB4E9447B79E70BF8E13
-:10019000A9BAADF13F7C751A3C6F7F4375A39FF4FC
-:1001A000D64CDFDB48D76640061FF9B53C75786E44
-:1001B0006AA5DD391BDE537D3B9A31BE3BD6EA3F53
-:1001C00048E7B9CE46F41E84F7101FB6C7039D2238
-:1001D000BEA2A76B5C281F48C6318213DC7694A3AD
-:1001E00041ECC7FDCD3AFF67847C13F2979A45BD79
-:1001F000D5B193F4F7F5C956FCE226E6F76435214C
-:100200005EA6C4F2FBB78CC70D86E33FC2F2EDAD2C
-:10021000CEC87E4DD0D7080EC1E6E56903E95D5131
-:10022000E3280E53C09A70E17194B66BAFF407C225
-:10023000D629F7BDDEB15359CCBECAFC4C1F476965
-:10024000605ACC98087194A05FC1750E6FE07196EA
-:10025000E1C25FFF75E3285953BF5E1C45EEF7729C
-:10026000F1EFB980D8E29E31C513E8BC4CA1F58509
-:10027000C1EF21E247841B0245A0FE3D517F754F2F
-:10028000F79F1E857F1EDEFDFC1E2CA51E374FB47A
-:100290005F31FAB30398BB356FC32A11C7D2C71FAA
-:1002A0002E07AB2EDCCF8FDF0B08AFCF33ACA7CC44
-:1002B000AC8F13CC70E8FBCF4AD6B7970FB3F53BA2
-:1002C00037F4CBD37E95FEFBBD35EE76C6BF371532
-:1002D000760EEAF9EB76CC9BC3B88FAB3F9E84C712
-:1002E000013CBF34B3A462C41713E9A5DB7DCBEF97
-:1002F000AA02FA590F7294F362978EFE42718F72BE
-:100300000DF149FAFBA3D1D349470EF9FF87371DF9
-:10031000EC9A3198F5C5016E8FF5BE3109BF17E42F
-:1003200038A7A01E32BCE937D47EE5C29201F1287D
-:10033000B7E950D78CB0EF08E69A3D26B49F739B7F
-:100340005EA4E751F5F9FE7C84F2D672055EC8BC66
-:10035000C0ED98170870CF6D10DF07EE1C38FF4D09
-:10036000CAC3D6B0FC3E4A6670292C7C7C29F7FAB9
-:10037000F9D319F7FBCAF9FAF2020DF3F6C93F27D0
-:10038000977FCF4CF77E312925EC5E86B8C701FBFD
-:100390008E9807CA268B7BB1D1F3D8B8DD59F9D234
-:1003A000DB38FE57B63BA38C3B2D2B18F19ED4A017
-:1003B00089C28F1C13CC44BF418F25B25EFFB39915
-:1003C000B392270F60A761DE2CC232DA3ABF6EDE2D
-:1003D000EC04116F92F156993F2BF362CF973FFBDC
-:1003E0004DFDF065C21F10379951698C4318D73BFA
-:1003F00059F8C7B3CB3C9326D37DAEC8F107D9FFDC
-:10040000ED746B44BFF8FD53059EF4BF7F44F9A122
-:10041000B0DEE4703B48BE27F3F28DE3815D74C526
-:10042000E4307FA0B73997FC7D61F696CC8725FA3A
-:10043000D82AFC107D7460D40B453CC4A817CAF8B8
-:100440008852CDFD13401F350807D4BB302F5DDA2D
-:1004500079329F54E68D625E28C5A3BEA65EF5ADD7
-:10046000DB53CD3329AFABC559F6D237B1A7DAA7E5
-:10047000F27BC2D29EF23AB8DFC18BF6D425FDEDF5
-:10048000A9E2326F2BC2CB68571DFFE987941F0B7F
-:100490007668DBE46F834F18FC53232670FC96725A
-:1004A0005AFAD30E8E34E9FCAEB3D43507295FBCBB
-:1004B00081FB5B32B42EB2D3AC0EAB0BFD2DE61933
-:1004C0009C8E2CF9CCAFF1382FF957645E599263AA
-:1004D00059C4FBA6D24E0C4A3BD1C7EFA7F61CE687
-:1004E00071DB38F4B760C7722ED7A4BFC5922CFC5D
-:1004F0002D867CEC38837FC5E86F7962B2DEDF72CF
-:10050000BFE2BA0D49FDE96D337F87A0F8B77B974D
-:10051000C6A1A9FF8CBFEDBBC2DF728F03D6B7FFA8
-:100520006DBDBFC518FF8A10F722E7D599034F901C
-:10053000DF44C257D2ADF4676534F1EF37CD52F7DF
-:1005400028C85FB63A387C55F4672587FC59CA132A
-:100550007FEAF34BD17DDC7E71F2C697719D6660B8
-:10056000381B23F9B7045C8DF1A88426710FF85B62
-:10057000F267BD63806FE13D4577E2778D8BEFAB2E
-:10058000388AE5B81D370EBE1ACAD287EFACC0F262
-:10059000BF5E0E66A3DE69F463BD821F414EE90FA4
-:1005A0005F231C259E7A1B249E3AAC44B7D51C8E33
-:1005B0004638A56A1C4F73014F4145E8C3BF9E44AE
-:1005C0004E9F1933DC2FA17F6D78BE9945C26373AE
-:1005D00013FF5E9684E37601C7A48665E42734E2C0
-:1005E000E9F0CEAF869FEA14E11710F07B6A5BD189
-:1005F0006D08B7BDF756FC0ECB5FF86F8C43B8EDB6
-:100600007BE8CEEF0AF8A5D3F7740DF05B14057EF6
-:10061000D3DCDCBEFEB8CC9B3805E4C265C021D07B
-:100620001FB2B3BDD0AE8F03E9F969EAB7E49F0A00
-:10063000F6F153F65AEE57E0A74F1BFC53A93E4E76
-:1006400037A9BE13449F19409F31E8AF6AE07A246E
-:10065000887D7F9C823637E7AF52AE21CB3181F067
-:10066000D9EEE471E7087ECA007DEFD7C087D1815B
-:10067000138E772057274C4909C9BBED0D3C8E7668
-:10068000E34CCF2484AB8CAB3D335D9B3C85EE2F9C
-:100690007C6DFFE30C9C47FA1F014F69FF2AE03B8A
-:1006A0007EDFFC52902768FF9B1B8216942BB54D72
-:1006B00037285E28DF9EC8CF3F35CDCB30CEDADF7E
-:1006C0005F178C47BD7DDAC83E7CA808C787B1ABF1
-:1006D0003FB913FD5CD1F021234ABED2F9F1A14C00
-:1006E000275FB7F6E143E38651C9178E0F478DF8B0
-:1006F00020E83FB521780FD2AF59E083D9097C0CAF
-:10070000E0A1221EE487E29E921E8222FFC0089F83
-:10071000A06F44943C84554AE900EBBBE0FC031114
-:100720000F6D11F1506F13CF97ED596D9BA5CF3F12
-:1007300070D3BA673B1A95F03CFE0879B2B7E1F97D
-:10074000C938A78C6B7E5CE6D98CCFA7E5F1730E18
-:10075000468F3305F07E2BA09FD380E777139ECB87
-:10076000FB07428FBB71A6B6159F8FB1FA29CF192F
-:10077000F4BD7BB1BE7DFFA3FC7BBBC20F29F3F2AE
-:10078000BEB1DF2CC1EAC7FB92D26FB635DEBA1319
-:10079000CFBB8E0567D2777E314E817EA7CD36CA1C
-:1007A0006BAC57C0F046BE78A9B76B0AE94D1ECABC
-:1007B000C7F556DA9DA8E7B726CE4A43BE51BB5EC1
-:1007C00025B91ECDBE91F4560BFC86E8AD89F39B8E
-:1007D00054C02FC2379F42FC2603F80DE73F1A434F
-:1007E000BDCE8C74E7E8CF6FB60E00FF0BE43B2F55
-:1007F000E17946E03BAFE03EC3F8CEEFA67C83B89C
-:10080000C7A553188FE788FD633C80F68FF415BEAB
-:100810007FA33EDBB76F3D7D49BAFB5F40679F23F7
-:100820005C23D0D9FFF98674A64E8D4C67E6A97A71
-:100830003A8B99FA8F496799534BCE4F675D02AF58
-:1008400064FEB6D42B2E52BBCEE5E2FCFF8FF3B78D
-:100850006F9FC4FDA9E7CBDFC6DF85F84F8DF9DCBC
-:10086000FFF4A7FEAFF5A7FE78EAB7E04FFDF74922
-:100870002ED2DB8C7ED5BDE3B5B6A903C495259FEA
-:10088000364B3E0DFC18796F2DF033E4CFA9D5BD62
-:100890007F7E86DB9BEE3817F91BEEC0F566087E7F
-:1008A0006DE4CBA077DE39F5EFE86FF87BF90DCB7F
-:1008B000265FD87DFBB2C92EE1778D7CEFBE45D88F
-:1008C000F72D3006DED3DBBEDAEA6F8505A78BF3A2
-:1008D00019D370E5654864AFAFB0C60607B09BE4B6
-:1008E000DF91E858EB7DEE746EF8FE5844B9D5B749
-:1008F0003F839E1C6E37B9BE82DD94324DEF873246
-:1009000037703BD70CF28EE2FA5A6900F975864FC0
-:10091000E9C2D4606F72A3827230B5C143F9F05F4F
-:1009200035AE6FC4A36871FE6F3BAE6FCC1BF8474A
-:1009300089F3FFF754FD772D659C5FFA5F8D71F9A0
-:1009400031D68E7292AF3526FC0B18AC75FF073B83
-:100950006FC3F35E68A77B1AC67C806871FB314960
-:10096000D6605C4EF4F8BDF417DC6F697C19EDF0CD
-:10097000FB9B4D74BEC6BC81FC789E3FFED4AF3657
-:10098000DD47F93F521FAE167CA649B1D2771DABA9
-:10099000FDC467BCDAEE668C27A73A5817EA5947B8
-:1009A000A7727A51D334E233E66A2FE1958C4FD4A3
-:1009B00066F17B733102BFD4918DAFE2F889475461
-:1009C00037C6B7376357E019F1282B518F9860A2CB
-:1009D000BC884EA591FC1E1D8A8BFEFE4762BE930D
-:1009E000F4A3C713DDBF5F80EB4FE17FA7E4D09C8A
-:1009F0006569C807D73737A7E1FDC4E2693C1FF135
-:100A00008E39676B288E9E07FA9F42A5EEEFD9CAF2
-:100A100072A7A688BFB7E4A77C4458F7367A6FA4BC
-:100A200095FC6CAA76F78DC807D451B308AF3B1478
-:100A3000E7C2C5785EB956D2635A73C72D5802FB18
-:100A4000DA90E229CFC6734D1C49FB6C4D1C928095
-:100A5000FAE886F41C9ABF5DF19667E37BE926A26B
-:100A60006B55C4E737E42E7B09FF0E484B8689E1BE
-:100A7000BD83CEDCB3EDD8AF7302FF2338C6F5AA31
-:100A80004EFD3D29FCF011F26F358DC7C55511178C
-:100A9000570D71E5324D917F6783E20E31826FD53C
-:100AA000E6AE5B40DF4F70589D88642DF1C12AC2CD
-:100AB0008FD51686713A66EED0E969B7ADD57FFF5E
-:100AC000C591AF5F4F7BDFFD846C2FF219FA1BB02D
-:100AD000942F9EE845FC407ECB93FEE2783D46D4C1
-:100AE0000316AF2FC2F9FCB3FC67F9CFF29FE5FF05
-:100AF000EFE5FF00834DEAE8008000000000000001
-:100B00001F8B080000000000000BC55B0D741CD596
-:100B100075BEB3333BBB2BADA459FDD82B90CDC8CC
-:100B200096880C421E0BCB488D8D66A595B4322E4F
-:100B3000D938FC98C476D6D8B8E43427559D26B168
-:100B4000135AADAD95254BB62C09829C43CFE9DAFB
-:100B500024396DF00125E9690C01CE1A1C420834D4
-:100B60000A10427A92208CE39496E698828968690A
-:100B7000E9BDF7CD6877462BFFC53D1187F3FC66CD
-:100B8000DEDCF7DEFD7BDFBDF72D0078600180EC59
-:100B900007001D6073912709E500676B200DD5D80C
-:100BA000F74E576841800FE9AF35DB0EF702647CE2
-:100BB000D97EB05E05B30EF8EF43D1B8E88E9B1630
-:100BC0005DF863D21DAC5537A48373E9DAE3DA4CE0
-:100BD00009A029EF3C205DD43CA77FA6E3F8E4CF31
-:100BE00064A8D5E7CEE7FEDEFE6E73D1FA12A8FF49
-:100BF000FF1B3F1F5F979A1E800AD18755B86F6A07
-:100C00009788AE8E7C5040F0A1AF73553A83FF9C1D
-:100C1000901283D5B4BF90C7F806CCE583DDCADA5D
-:100C20001CF965E9CB827CB94D1F9720EF0C9881A8
-:100C3000627A85DF21EF355CF6872812A5DCC3CF09
-:100C4000C1A2170678E6435CDFD1ACBC405B90A53F
-:100C50002B6F5479FC72B5E785A695F8EC15D9F899
-:100C6000869EA5CBEBA9069E00ECEFAAB3EF156B11
-:100C7000DE8F1C5221638FC7FF8F9921E6D3C4A654
-:100C8000FB2181FCFDF9C64F9424F2E881DD2E4B57
-:100C90003BBF7F036902F30DD2DFC07FA77E312AFD
-:100CA000F1E4C7C4F3D40A2D3D84CF87A4F4D03532
-:100CB00034EE2EC15F5B0E85961CF02F5C837CF4B6
-:100CC0005A72F2BAF7857FCA02E693C59C1C392C8A
-:100CD000611A35B4EF3E9B9E6E6400F934BCBC6172
-:100CE000C5904EFB1FFD876FE13A0E1DDDF3E6B7A1
-:100CF000F075A0BE61A419D75360780C99F4F9532C
-:100D0000C78EA1B860A0FE0BA34476DBA8646AF886
-:100D1000DEAF058FC8B447BF64123DE5E042DE4F49
-:100D2000789B530F2624634125ED6F4C02924BA113
-:100D3000E17CEFD373F683FF1F2239B37EE63C4795
-:100D4000BE21F7364CD6CFE5FB2B963E2B383E69BD
-:100D5000D345BE8C7BF59B89CFE3FB644822C9F168
-:100D60005D68145700FC5BE6BE4FEF46DBFE42BFFA
-:100D700097E5301151D3128E9F28D26EDB40FD0AC9
-:100D80008F7184998AFFE3BE46975DCDFBB2E76B16
-:100D90006AD579BEB1C8824AB2471C5719BF6EAE38
-:100DA000FEB9D77FB1FA77B7596AE9FB28107D9869
-:100DB000BCD943F6E4B7C65C234F362EA1F97E2E8C
-:100DC00083D09B1E8817CDE54F3FF9838F64F54490
-:100DD000B5F4686FF9FA9F10F9F9F4594D4F99D5A8
-:100DE0000D340FF410DF97859DEBB3C77DCE92973E
-:100DF0002F0D196F31B519131AA89D32256CCF6EBE
-:100E0000FCBCB6569F7F1E1FE4D0AD267AC0FBF611
-:100E100042829945723573E4BAA7B0E10E924BFF56
-:100E20004D2AB0FEB9F97C9EBEAA648E4BC5A40FB4
-:100E30001F61FD48A27ED4221D6FD8A987F12756D5
-:100E4000C27450C829C9CF6326C96959AB77D67F08
-:100E5000FA73FC25E8BB7F2323BD7B63AA3E84EBAA
-:100E6000BC37BEFDABB7929D3F2F1B12BFD7D91F1A
-:100E70007EC19A034627581F4AAC7367E7B17B5E71
-:100E80007B8E6414535F27BE911DCFF245F867D364
-:100E9000BF2A3BDFC1E693834B910FA9C1FCF4EF5E
-:100EA0002CD33F47FCB3F93C1FDD59FFBDF3F86479
-:100EB000F4FA6C7FA4201188A01C4682063A017ABD
-:100EC0007F82DFC34AD4CBCAF9E5891C65FEBC46E4
-:100ED000FFC471DD51538B605F3E864B5F8E7EB1E8
-:100EE00048BF793DBEEA287F7D13F17F5BD0A3C95F
-:100EF00039F6D5B7DF0B99203102E745BD5B07D343
-:100F00009BD6E338A8F1B29ECBE52BF8F9D6A2B870
-:100F1000E2C1F6EAC8129ECFFEBE1BEE5376E0F3A6
-:100F2000E55EED15D29354B9442BC2E7C8405CFA94
-:100F30005A05CC626CBBF4889FCEB5D8E33411401F
-:100F40006B68BC9CCEA586C70E5525C8AE93E654EB
-:100F50001DCA276489EB5ADF54BC1DE9F5BD201B6F
-:100F60007BB01F0A6E5F07A847D22341F6137DE8C6
-:100F7000E77D287725D8F9263D5F7306209AA34F91
-:100F8000AD337E88E6F8BD0852CEEDB7FB2B1DE3EE
-:100F90003BB46AC77B194C23837CEA0A2F738C2BE2
-:100FA0006A5AA9D17ABBF5158EE737D5B538BE8711
-:100FB000A872721AFBABF13F92BB0CA2CFEFAB0948
-:100FC00027603FE77B0572FAF87E6DA4A8FC341D0C
-:100FD0004A37C00D6447289723C3E47F36F8F9DC0D
-:100FE000EAF3C231A904C8F493D048CC36F9BC97CF
-:100FF0002C7D4D46AA594E52F099F7590F1F9FF676
-:1010000010CE82C7A091FCEBDF6AFA710F0EB99285
-:1010100048E2F76154741DE584AE3A1968E4E7E6E6
-:10102000D2523AE7A46437F617E1B8B05045789643
-:10103000C6F961F757C4385844E3344856615F3302
-:10104000A080E45A85743E5BCADF25BBADEFAE12CB
-:10105000DF254B4A05FD86463E47331DD81E060355
-:101060007CEC7FE2089AC88BF4707B15AD0A9F3F39
-:10107000084623F56B619AFD148A5FA2FE4298D45C
-:101080008493CF08BF3DAD844EFB85DFCF672F59DA
-:10109000BB51E0B42D0F1C7C55ABF925B2BFDBEE84
-:1010A000683A27EE50763EEDB0DBEF4474711EEEE9
-:1010B000EC623B51763EC3EF5F8AC4F7901D12EBA2
-:1010C000FD8D73F9DDA06680FC572A02461249A403
-:1010D0001E5D1BDE82F24D3EEA376AE1F2C9E36231
-:1010E000E59006AD80F82AF75CAA1C80CFF9E031C4
-:1010F000FFE121564693CFC93F402EDFBA14B9B85D
-:10110000E501F79401B49CDF8F3E206502D252E6E0
-:1011100087196ECCF21FFBC96516BF4A2D79C8A28C
-:10112000CDC8D673A5747EB910BDB2D2AC7CCE2723
-:1011300097701CDF3766E523F798CC3CFB9CF6C123
-:1011400019C6B74B2483E5B5548E7BA85F28652C60
-:10115000D093E673BD183496CF15D0C36DB9777AA6
-:101160000BE3E19D3811E1D90FF094CD89C752C14D
-:10117000367F35F9D73AC5F060BFBEC8134F231F7D
-:10118000AF542043FBAB542049FE1C9101D34F3D8B
-:101190008AA7159E33293CA63DF4DD2E7F3A2565AE
-:1011A000E76FB0FCF64F8ABEA94DD767F97C92FC79
-:1011B000D772C10F0FFB9FC90C7D1F8E81D1A7CFA6
-:1011C000F567382E295B7E8ADACDF4A285F9962C54
-:1011D000C6BE34F8C3F70967103D05FBDF8B24DE7C
-:1011E00021BD219C1E2C65BF345D48C07A2E2E3057
-:1011F00009576CB1E6D970A3BE388EEBDC32E87BC0
-:101200009DE841CAE7C405EEEF750972BFB7BF9B01
-:10121000D52BF7F7976807B0B3E2827040E491D519
-:1012200025D37970FB2CCE243B29CBFD4EC8492D0C
-:101230004F30EE50C95ECACE4FC7EBC22F361D2FBE
-:101240002A2ED1F15AF8C53EA7B6C319AFB2D45A67
-:1012500027F26B2BD87FE5CCCFCD16FF3E4DE7555F
-:1012600031F1130315DCF73688ABA4B77F86109AEB
-:1012700070FC927DDB8A192F405423FE48998FCA57
-:101280001F5E7B117CB4F8B439F3A65727BFB4B303
-:1012900008DEC88DDFACF7EF6CFC8488D3FDFE1A46
-:1012A0007F4E7C5878EC835E72EA7B0AFFE68556B7
-:1012B0005C7AFF4BB22157D37B819B0320CEEF4258
-:1012C000B2535C77E1E3A7FF87C617BA7035518642
-:1012D0001CBA9EC2FD8C670B8B559D71B64BCF6CB3
-:1012E0001C0D1F081C1CB4B897435722BC6CC73D8B
-:1012F0004C579A3BEF75163EC757910F2F00CFBB47
-:10130000713ACCE273F13E1854859D609C9971C48A
-:10131000C17A5E3BB3D76D7F57A1C6AB8DFA3CDF78
-:101320005B72A8A7401CFDC2C22A48EFC6F50E0E8C
-:10133000EE8814627FAC02748C3061A0F38B12E1F2
-:101340008DB672A14AA166810B690AB0E378FC0BE5
-:10135000FDAB3E5487EFB757050D5C192C7C0B7124
-:1013600032D2B9ABCA6F98F82005E27DB2D923E238
-:10137000C924BC4C78749B251FEFE30267B26CD084
-:101380000EF7B7097CB5EDD867D7917C474A6F3126
-:1013900032386E1BFAA732C263A35EC67388EB1C99
-:1013A000B8DFD79C8303F1FFBB0E791D7DAF0B2700
-:1013B0000EB7210E44FDB671E0FD6DC07646EBA27E
-:1013C000F3E472CD03C172F6A7D729539E7CF93797
-:1013D0005B1E36FE7EA242F0D9FBAEE00B06CC3B94
-:1013E000E8B9EF5D118FA1030F362DA0D35FF0CFC9
-:1013F000D784FCA1A7EF8AF300BFE4759BF81FAD6B
-:10140000DB8D877D2E3CEC5EAF2D87476CFEAC827A
-:1014100055C41FC4E78C13ECFDB8F7F138C6E7518B
-:10142000548A277BFDDC667A356E9FEA0D737BA2BA
-:1014300057872802B0677AEBB87DB6D7E0E7CFF5DB
-:1014400036736BF3612E7F445EF32A6BCD4AFD54F5
-:101450009CCED12BA21E3685B17B3CCCB7B3A89FC6
-:10146000647CC506E5DE707CCC93A690DE8E7F168C
-:101470005AFA7AADEFCC711F8E1FA904630F7EBF9D
-:10148000B0793BEBD99A339EAC9D00C539058E3CB3
-:101490004104CA1CFD76FF958EF11DDA52C7FBD2BE
-:1014A000C834FBA9AEF0B58E71B69CFF8EE22C5C01
-:1014B000DF58F4A4467CEDD6AF778C53EE41F93774
-:1014C00050FCF351075D90D719E4A74B373AF5B0BC
-:1014D000D82557F5EE73C741B69CDF6A73C643F350
-:1014E000C9D7ADAF365F4B67F92AE2CA14C595C8B4
-:1014F000D7524DF0D5DEEF88B55F7B5EA559ECEF96
-:1015000072C797C5145F56E78B2F4F597C3E4F7CAF
-:101510001973C6976EBE9E2FBE5CD0EEF42B17CA11
-:10152000CFCD8B45DEADF47999E31639D6C3E760AC
-:10153000D9946C74914BB4705911F9001CB7B94926
-:101540004D13CE1C83E9309DE70725E42AEA5B5959
-:10155000BD51497EE6E190F1CA06C28DDD220FF849
-:1015600074E4B630E18EFEDD87C37858414BBB870B
-:10157000FDDD68E434E72F141D387F81AD99CE83FB
-:101580004FECF176BEF1E026352DE1F88356BEF141
-:1015900060F76CBE91EB1B134D22DFF827EDBA9577
-:1015A000FF4B86295EB977D3AA4A3EAC14EC5F475D
-:1015B000C30DB693A180564C71746A9347A37DC93D
-:1015C0002BEFFF3CE9C701A9675F0DC56F151ECE64
-:1015D000BBA642AB2AB7E0387933C218EA6F5AF596
-:1015E0002AF9EC890A7D5F0D7D1FAA61FEF5AFBE69
-:1015F000CD4FF38C841674537E64A4C3C332920916
-:101600006714339DBA73C53DEE3A804C1E97E2B71E
-:10161000724F46A5F38AF0474EDEDF96FF5048E54D
-:10162000FCECD6F6870E276BF831FBAF85765D664E
-:10163000531BE799CF129E90E6AFCBECB5F29DB36A
-:10164000E74ED8B99E3CF3302EB0EB12F4A7DB790D
-:101650005AFC4BDDDC99A673741CE231F29FC9E0A1
-:10166000B9EB204AF0DC7590F9EA1EBBDA451EF5AD
-:10167000CB2477915F74D44B94985517B1E2D783FC
-:10168000940F277D70D549EC75F459F452B37AE480
-:10169000AA9BAC562D7A06E4CB5FFFA1F593FBDB4A
-:1016A00045BDE662EB26DF6D07B15E2BDFEDB5E4ED
-:1016B0007F8D3CB983F4F18F9DEFFE6EFBE5CD7716
-:1016C000CFAD13A5D95EE0D89937D8AE972DB0F03D
-:1016D000CBB9EB404304F4517EE32B109752FDC38A
-:1016E000EA27AF1374DD75A1809547F951FB5211BC
-:1016F0006F913F21E12AC662E26B50F97652C37DB9
-:101700001404C72084ADAF7C4B92DAD6C53AD78794
-:10171000C69779F8BC1A2F4A1CEEA7F52F0BE6B531
-:101720008B572DFF3768D56F48813D646F926D1CD4
-:1017300090F0A09C2640C8F9ADF6108F57B4D1E6C2
-:101740003B516F4E913E54F07EF2D67F4EB78BFAEE
-:101750004F0EFDAF939EA62CE244670BD2F90F4BC0
-:101760001F810E8E0514EC88F9FCFA6833E182DFE4
-:10177000B56BE2BDB2C2207B180FE59FEF77D67E36
-:10178000805231ABB2F868E1464107FCE2FB83D2FC
-:10179000990D2757B25CD99E681DF4DE5DFF72D3A8
-:1017A0000FD439E31BB5CA39FE83D97D38E3A203D0
-:1017B000F3D4C7164585BEB62E167A46FAB1278FE2
-:1017C0007EB8ED5DA5BC27C553D190359FF03B4158
-:1017D00065AA8DE29D603D185C53548EF37EE34F05
-:1017E000D41C9B5E497EBED8A03848F1A3AB6CCC1C
-:1017F000C689EE7D9F2FCE5314487A1BE7C67B48DF
-:10180000D72C6914E74C3287DE5551A127726E3C04
-:10181000584DE1887E33D7F1A80E48FD5DBE0DF925
-:10182000CEE9DA76EFAC9FCC57D73914C73882822D
-:10183000D447F6EFDB8AFD77348FE6E3317ADEBA00
-:101840008E66F567EB3AF10BABEB8C464BBB6B2E20
-:10185000A6AE330FDDD9F3786E5D271AC57D8E05F0
-:10186000457D65B6AE734BF905E573C03A974B2DD0
-:10187000BF5CD46DC5113B258E239E6AFAEDF072D4
-:10188000D2B3262FEB01EC9F805C3B59B751FF5A36
-:10189000199D33AFFAA056F83593E8D971B1CD3F11
-:1018A000D5A2DFF6D0F30A8D1FAFF4AC627A90F1C7
-:1018B00079B8D89D54AD56A676B99A914B886E29C1
-:1018C0005875F48C44CF23C8ACDCF86064E6C5F6E8
-:1018D00012CA9304C120173412D17697D03FA80AB8
-:1018E0004478A75A4F93BF6DF7173AFCFF48B72AC1
-:1018F000FC6BADB82F337E5CFFDA361C3FB033C0D3
-:10190000B8E9409547D85752E27A7287E68C7BC691
-:101910002797083CB6DF6BD03D91A39362FCD6C8F5
-:10192000AAB4CCB8DB191775EBCEB8686B65E32B9E
-:101930008417A1DFCBF978CDC2B537D539E3A4A29E
-:10194000EA9E6709A76CEE1778786FB874C156F4F1
-:101950007FBF8AEA8E38714BFF5D5C37EA5781EBB7
-:10196000A9239B54B68F11EFEB87B6326E2C603EE5
-:101970004E6C522B1339F652D6E1B3EE4508FC817A
-:10198000F0323199E77D5987F03BA8D87C8EDBFA9D
-:10199000F2A79F117C2EAE82B44E38AE7B4786E212
-:1019A000CAF12ADC13BEEF0FD7741FA7F95F968127
-:1019B000F6E9D6C3EA8E5AB6D3D9F3B4D9E3E093A5
-:1019C000D717EF21FA7013E8E4D7A231EC531E6069
-:1019D000A30A941FF085FF8AF75B8AFD00F6FDB12C
-:1019E000D1A4827D7F4DE27AC2C54FEFBA7D3052DD
-:1019F0004EE79DB06FDFC6EDF14FD0F8955E08D091
-:101A0000FA4097C2B4BEA4B8CFE0B687BDA91F44C0
-:101A1000494E7B0D8945B4B97BFDDD7C6FA9BC8047
-:101A200071D3A837BE85FDD1AD7E2DC967E034C71F
-:101A300011DEAFF880F46E62D76F2A087FFF382A74
-:101A4000EA9A01DD195FFB6194CFEDD5E6D446FA41
-:101A50006E75B34A150F78AAE534CB6DA2C967F845
-:101A6000701D132D12F3F9BD266F9AE679529D92DF
-:101A700069DE27DFC3B9ABF3D9777EBBB2EDC83DD2
-:101A80007EA479BD9FF4622F4CDD42FC49CE883C98
-:101A9000957B5CBC439C577B53B7D6299CCF52B9EE
-:101AA000DEAE9C31CC12A41E9A89FF3DE55E9351B7
-:101AB00045C449959EA484F406BAC5BD8C81A2C4D0
-:101AC00020E9F300EA3DC749E5E23ED27865B93145
-:101AD0009433DF78CB6D75E4CF5E680A30BEEF3BA0
-:101AE000F1177712BE6F93DFFAEE23145755A92C26
-:101AF000CF016FCFAB1407259B02BCDE138B54F0D4
-:101B0000933F28BFF3418AB3E1E846C8D5D7899807
-:101B1000B0D3892A61F7D2231B390E189764E6B334
-:101B2000597144223CE68BD9792791678A58EE6C2B
-:101B300062E377380F7545B7C8A3466256BE490EB3
-:101B400026592F6F083C48F66F2A5E477CBCE68C0E
-:101B5000335EBEC2152FBBF351FF1BB5F21156DE2B
-:101B6000C9D6CB626BCC44B3E5A757FAD2420F7B00
-:101B70002AB5FAB9F6FDCF167E9EEAF5F33DB21707
-:101B80007B35EE179B6FEF2E433A2FF786F9F9C797
-:101B9000561F9672BF1B5979AB5F677F321D26BAFD
-:101BA0006E3FE2D68BA16881E33CB1D759D4D226EF
-:101BB000EEDF9D618F0C6B82D3ED7C36C254301703
-:101BC000EF677AC53DB7A7AC759EA075FA284F267A
-:101BD000D6F76CAFCEED73BD75DC6EEA00510FB079
-:101BE000FDC355E81F900FD12AD1277F40F22F2D3A
-:101BF000BF93F364BEB0A291BDFBAB4633528E7F60
-:101C00009828EAF9C55DE4F72B82AC8FEE7DADE94B
-:101C1000F0E4DDD7E6961DEC77CEE23CC47FF433EA
-:101C200077B31F42BFC0F36E54EFE07598E897D8C2
-:101C30002FF47CED76F60B5E203D77FB81D2A4B0CD
-:101C4000EF842EF277F63DA159BF80F3A4719EA7D1
-:101C5000D0AF537F00FD00CD33D0F2FA9FD3BCEF5D
-:101C6000BD5FC0F7A22636BDC27EE185B3E8B32FC3
-:101C7000A35FB0EDF0B5139123B9F17C56CEEB6FB5
-:101C80003F26F8A181E0EB86789E38F162E50CE60C
-:101C900085E198B4327D87A83BAACC8779EB8E4941
-:101CA0008F416981BE492566D51D81EA8E76FD3159
-:101CB000A7EE58E0AC3BAAE914E39BB45577BC6DA2
-:101CC000ADA83BAA05D3C1EC3AEC7A633F3DAACC60
-:101CD000D6E7EFEC48ECEA68CAD6197549D4C15F7B
-:101CE0008A985FA6E7505ECAE7BFBB4E69D723114B
-:101CF000DE49899CFA66033EF79766EB5FEE7AA6AB
-:101D00007D2FA3419D3E328C7CE9BBC3CFF8C15EE1
-:101D10005FDFA37FF26AA23C7B1FC0AE77DAF54C8F
-:101D2000BBEE89EB1ECB5D373C0EEC77E031FF61FB
-:101D30003ADFDCEBFD5E24717F47459E755F607D79
-:101D4000711D58F41177913DBF66F1D11EF7906572
-:101D50008FCB5591DF866295E39DB687822013CEA7
-:101D60002E528F905D6C81E90EE26F5F48E0BCD42B
-:101D7000012FFBC9A31D3ACBAF4235F93E44C597AD
-:101D800003C66E24933AAE1553FEA93B6A1EEDE0DE
-:101D9000758CDEB29ED681B89DFCDDAF6BBF5ACE8E
-:101DA000F57EBAF75442F19FB198F220CF77E4BFA5
-:101DB000AFD4BAF8CC7A9EB7C803149FA502C6B3B5
-:101DC0007CAFF80985E9752309B391EF2F45D5520A
-:101DD000A223EEA7F6054FB2BC5A6B7D2B38AF5746
-:101DE000943F0E7CA643C4AD6B91968A743ED39605
-:101DF000F801AD9B72A561D66311DF3D4F7E52F8AD
-:101E0000AF7B3CABB279B01239F13C8D87A39242E3
-:101E1000E7A3CFD21B3B4E7CBBCD7C81E48EF2305E
-:101E2000697EFB1E903DFF4B961C921DE68B34EEA7
-:101E3000756B9E062D19213B6C48A03E486C3FAE49
-:101E40003ABCD00BB7BEDAFA365B87B7F450D2444F
-:101E5000BD16F5EA755EEF93FA718F44F5F6C4E1AD
-:101E600061FAF612EBDD57B69B6FD2BA4BDAE2FF9E
-:101E70004E747FBDEB76BE177CA1F7385A17F784F6
-:101E8000A98E3F1010B8F9E188E1F0778B3A857C94
-:101E900016750ABC742DEACC14DF2F35F8DE37C076
-:101EA000DD8CA36DFF34DA9BF8FEA9DAECF7A95EAE
-:101EB00098A47AD07CEBF0EEDBC179DDBEAA363F88
-:101EC000F91FF46F25D41FA832C3B9EB4815093D9B
-:101ED0004F2E12790BCAA72573EE939776CABC9F33
-:101EE000F62AC890EEF882A2EEE643C3D5F1FCF1E3
-:101EF00099CD7CBF189F4F528AE18A4E5DC4E5E5BB
-:101F00000698146F56C581ECDBA765BFA73A6A7BBC
-:101F1000550FDFB79C8F8E1CB6BF4FF0F737766A30
-:101F20004C572DF738F200E7E39B9B2FFDC4B7DA3F
-:101F3000F9F9A65E30DF84DDB9F9B5CAE2D7D3A1DD
-:101F40002FF2FEE08376B6339F86FBC47675A7F04A
-:101F50002F72D0844411F9A8382248CAB3F700D5AB
-:101F6000A16D3ECB9AE0B3ACF5F077BE2A0312D751
-:101F7000115F12CC17371FD04F00F9891F3D7AA887
-:101F80009CF0692BF6C3C27F800FDB073A845C6C40
-:101F90003B5D073F0D8AFCB7F3BC70FB53BB7DD89C
-:101FA000CA3FBB9F4B5D01E13F7470F0BDC8FAFDB5
-:101FB000C291C146C607787E26E95E4C67656D0111
-:101FC000F52F771DD15D3F74D709DDF5C1ACDE98E3
-:101FD0007E5AE73BDAC9E4C7F3E88BDD0E5BF6D641
-:101FE000DFEBCF6B77C368EF24BF8116334975A34E
-:101FF000BDA1E930EBCDF13719172BCFCB06E14B63
-:10200000451172EE5C34CD72EC6A3681EA4DC3BD87
-:102010001BBE9D4BF781B6C4573A514F0AB5499341
-:10202000E8042193A4F3676D99D9930F370D587E77
-:10203000E4EDB6F86EFA8EAEAD93FC4F45CC3DD4D0
-:10204000BF50BF359F3D2936EF2EDA9E4E0A7B6A80
-:10205000DEC1F63452D5C3386BE4A73221A92C8EE9
-:10206000B4EC69A4E534DBBB6D5769DBFF340BBB13
-:10207000A03C029DDFC55526FB8D6F5AF6A4A09D9E
-:10208000903DF92C7B2AD6B2E3293FDE4E7CC6E791
-:102090004AD5347F57DC6CD91FD95390EE0F03E338
-:1020A0008001B43BCA8BB8EDABB5469C9B8FB7257E
-:1020B0001EEE247CB1683DE7E507AAFEB38CF18BE8
-:1020C000A5FF59BCDBC8E7F9D9418F41F6D04000E4
-:1020D000BA316B07F6BE57CFC89041D1AC9991B8D1
-:1020E000BD71A690DBD69900B7E64C19B79199104F
-:1020F000B76D335772DB3E53C96D7406EDE07AB4A9
-:1021000087996A6E3B67AEE5B66B6619B7B199EB16
-:10211000795CF7CC0A6ED7CE7C94DB9B665AC43CC4
-:1021200075625F79EC81CA6097C11E8C2414911D81
-:102130007CE655F6EF9ACA779452A1555C27F229AE
-:10214000D36C0F479A85BFEF0A0A39B9EDE1EDB6B6
-:10215000C4AFF2D9C32CBE554023FEAB60FDB9F02D
-:1021600003E29FDFD0F736EE55C326EB19E293D397
-:1021700024CF4BC509B33873B1CA78D4C699238B21
-:102180001067566771E6408B88CB52077C1CBF6D89
-:1021900095C4FDB22BDB13FFC5F609224F94B8C5D9
-:1021A000AF116E4E853AC341CAEBED9581F20588B9
-:1021B000433EE0752A71719FF502EDF95444F87DB4
-:1021C0007B7C039CF4F45C048EF935FDB3657EBF23
-:1021D000507AA9E7ACB75DF8054DF8855455CF2086
-:1021E000D7A55D7EC13E67911F0EBFB0B4CBF20B89
-:1021F000969D975689F3B294FC02F2675997ED17B2
-:102200009CE7AC62E390988D432CBF1013DF216EE6
-:10221000779CB3286E3FE4E062D4A3E55D79700853
-:102220009FE739E75C5F4D6D847E4B103A03115296
-:10223000CFE2197DAD91E7DC49698D6C07C79576D2
-:10224000C8CDAF5CB49D85EC73C7E473C73DCEB613
-:10225000B781E3DD629FD639741CF76FE6D85B97D0
-:1022600026CE233C7F6EA27DBAEDAD75B19988E78D
-:1022700059E727BB04DEFFF11A0BF722AE34828C3C
-:10228000EFF3E2864F92FC9AC4EF341E43FFD31162
-:102290004BA6149DEDFC9334EFEAE8944C79A01B17
-:1022A0009B475FA69208DAE9A7BA9A2EDD4E9BDB20
-:1022B000AC7ADFCE3271D9D96ACFA7FF362EB2ED14
-:1022C000C03DEEE16A73433E7E3C63F1A36FD0D321
-:1022D0004D17FE6CBD38AE2C65FC93C7DF9AC66502
-:1022E000F1B717863F8EE33948723F07FE18CE27B5
-:1022F000FFF9F0C778D72CFE182339B5D60BFCF1BF
-:102300004C179C33BEB9645C1139C97CBB545CF179
-:1023100050D7B971C5B7BB84DF54B469F61FC597F0
-:10232000882BDC7E02F1C33F317F0C71EEDABF37C0
-:10233000E10B9439E717FA99EFD338C20D7479ECB1
-:1023400048B02D29B11DC49FA0E7A3E612D6A3CBA8
-:10235000650F88137FD895D33F9F5D5CF0B8C94D5A
-:102360009C07B4EB99BF0F1437507E64A75FB45F2E
-:102370002A283E42ED58AFC843EFB7F27E635EE0D5
-:10238000FA41BF54601C91E8BBC569916FEF594E8B
-:1023900079CFDF76D9BF97ECB9817F77037FEDA83E
-:1023A0009BCEBF2E71CF97487DC8F7C1AB34CEA36B
-:1023B0005B7CA174109DD343CBFC8C03873A8E1EAB
-:1023C000BA93F2321D220F860A51FD713A7F11D65F
-:1023D00034E79C0B3228A7293F3F4877DB19746C00
-:1023E00010F7A035F1BE348AF17B6EDDCEB8DBD1BB
-:1023F000072B5F6AFF3EB070CD7ADB4E988E6D275B
-:102400008545939A96E36F067B9DBFFF76B772ED85
-:102410007D71BA9B3C5AEFE1FAC5BE1A2540F5948E
-:102420007D7522CB3E5CE389E5AB8F5F1B931C7906
-:102430006DBBBE5D1011EB9A6FBE01D77A7C7ADC62
-:10244000243D1DD6D371FE1D725DB994CCC93B7B72
-:10245000AD79862423D38ACC1C2A12E785AF2A09BA
-:102460001EC203A1EDD7138FFD553D703A48F737D3
-:1024700092F006B6A1523591CEE38796C7841F1A13
-:10248000F24EC6588ED77938DF8B982A6F9E6C61D2
-:102490004CF8E9E19A23BCBE24F285EA55EE7101BD
-:1024A0006B5C813ACAF58E7DB5DFD4695FFBE807C6
-:1024B0003757A07CBBFFFBC1DD41D2DFBB394F33B7
-:1024C00046F91AF4A705D71C8BB521DDFD372A1A6A
-:1024D000EDA343AEDA4DEB1A8D82C17500975E9481
-:1024E000AC51025C2F353D7C07D4AD2705C554198E
-:1024F000213D9CF20BFD107A16B4F4E68021EA3EF1
-:1025000007A2A27E65CB2FE77D80EAD267A30AC728
-:102510002576FD8A6A3DF970DC7ECB2EFB2DBB440F
-:102520009CCA7587D9F78B337CEEEC6FC984E99C24
-:1025300029D2FC468CE81E75AE6B6FD39403971CB2
-:1025400058F1A2DFBA8CEF5A9FD02FE5A95FB03FB8
-:102550002D52A6F8BC2A5A7D8AFDE97DD67ABA9A10
-:1025600081F759BCD2F2DB713322E8FDA5C30F48D5
-:10257000D7BC6A7AE95CB855DC49F0368BBA5D8124
-:102580000A4606F97CA022C8F79ACA565A75BA7547
-:10259000E25E857D2FBC22EEBC1716829CDF0954BB
-:1025A0008B7B59B97D90379EF3FEDBCE5F1E7EEEAE
-:1025B000440EBD2FC59CF7C7CFF7FDEF7BD3CF9D52
-:1025C00040FD1A35CE6D87B6BCEEED6D667ED9FA4C
-:1025D00068EB6788B6D838FFF763A178DEFACC31AC
-:1025E000CB0ECEE7CFCA7CF11EC245F7AD893BF0DA
-:1025F000D103967D3E1013F94F75F119CEAB1DB482
-:10260000EE5F1D0CC086EFE499371353797C56FFBB
-:102610009D38C2D69FB97C380F8E5813B5E2104F43
-:1026200080CEF151A3ED59AA47BEABA93AE4F80117
-:10263000779EDDC61105DD76BEEF3DC65125C12969
-:10264000A1B72B9D71871B070C2BE90D64E7C375A0
-:10265000AAED9FD88F5CFD6CE1D7938C939252EEDC
-:10266000B9B93F7307D30DB9F2EC50EEFCDDCAFEE9
-:1026700018F07A42FA9929BA671E8A29E2DED6A8AA
-:1026800009B9F76EC63CBF9C3965FDFB031B77B0EB
-:102690003EEF9FE2DFD3C0172077FEBD1FDBCCBF2C
-:1026A0002F399FDC67FD7A5875E4DF2ED62EFE2584
-:1026B00066D5B7031020BB380BF770DD1D46638E5F
-:1026C000F3882B100BF8C8167FB84D6595757449C3
-:1026D000597B817651D73F9B98F58B0A7D67589F30
-:1026E00055D2AD0A8AC721C3BF53B4EF959E855F0B
-:1026F000F2BCC9A7246916675D89E13EFDFE712918
-:10270000A99CE6A1D6BDFE2560F0F31A88737B353F
-:10271000F4705B07A3DC5E0393DCD6C314B70D70C3
-:1027200086DB15A0CB34C9F560CAC0573513DCBFB2
-:102730000192DCB640E2FD53B8FEFE8AED2B385E16
-:10274000B4FD87C5279BCF79EC9D71A4CD0F9BEF7E
-:10275000FF48CEFA02EC3915127EB87D6586F53C4D
-:10276000181438D98EAF6D3AF3E1DECB85CF6C5CAF
-:10277000F97FE7ADB141E048000000000000000033
-:1027800000000018000000000000000000000040F1
-:102790000000000000000000000000280000000011
-:1027A0000000000000000010000000000000000019
-:1027B00000000020000000000000000000000010E9
-:1027C0000000000000000000000000080000000001
-:1027D00000000000000000000000000000000000F9
-:1027E00000000000000000000000000000000000E9
-:1027F00000000000000000000000000000000000D9
-:1028000000000000000000000000000000000000C8
-:1028100000000000000000000000000000000000B8
-:1028200000000000000000000000000000000000A8
-:102830000000000000000000000000000000000098
-:102840000000000000000000000000000000000088
-:102850000000000000000000000000000000000078
-:102860000000000000000000000000000000000068
-:102870000000000000000000000000000000000058
-:102880000000000000000000000000000000000048
-:102890000000000000000000000000000000000038
-:1028A0000000000000000000000000000000000028
-:1028B0000000000000000000000000000000000018
-:1028C0000000000000000000000000000000000008
-:1028D00000000000000000000000000000000000F8
-:1028E0000000000000000000000090000010000048
-:1028F0000000000800009008001000000000000226
-:1029000000009000001000000000001000009DA8D2
-:10291000000000000000000880000000000000002F
-:102920000000000080000000000000000000000027
-:10293000800000000000000000000000000091A0E6
-:102940000000000000000008000093C00001000427
-:1029500000000001000093C8000000000000000219
-:10296000000093D00000000000000008000093D495
-:102970000000000000000002000094980000000029
-:1029800000000008000093D80008000000000008C4
-:1029900000009B3800400000000000400000941838
-:1029A0000008000000000008000094580008000023
-:1029B00000000008000094A800C800000000009873
-:1029C000000096380098000000000028000096786B
-:1029D00000980000000000280000C0000540003002
-:1029E000000005400000CB200008000000000001AE
-:1029F0000000CB21000800000000000100002008BA
-:102A00000010000000000010000020000000000086
-:102A10000000000800009D600008000000000002A7
-:102A200000009DA000000000000000010000000068
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50008000000000000000000000008000000076
-:102A600000000000000000008000000000000000E6
-:102A700000000000800000000000000000000000D6
-:102A80008000000000000000000000008000000046
-:102A900000000000000000008000000000000000B6
-:102AA00000000000800000000000000000000000A6
-:102AB0008000000000000000000000008000000016
-:102AC0000000000000000000800000000000000086
-:102AD0000000000080000000000000000000000076
-:102AE0008000000000000000000000000000000066
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B20000000000000000000800000000000000025
-:102B30000000000080000000000000000000000015
-:102B40008000000000000000000000000000000005
-:102B500000000000000000008000000000000000F5
-:102B600000000000800000000000000000000000E5
-:102B700080000000000000000000000000000000D5
-:102B80000000000000000000000000000000000045
-:102B90000000000000000000000000000000000035
-:102BA0000000000000000000000000000000000025
-:102BB0000000000000000000000000000000000015
-:102BC00000000000000012C800800000000000802B
-:102BD0000000000100000000000000000000A00054
-:102BE000071000000000071000001EC800000000D1
-:102BF000000000080000AEC000080000000000084F
-:102C00000000AE4000080000000000080000AE8098
-:102C1000000800000000000800002008001000006C
-:102C2000000000100000200000000000000000086C
-:102C30000000A01007100040000000400000AF405E
-:102C400000080000000000010000AF410008000083
-:102C50000000000100001ED0000000000000000184
-:102C600000001ED8000000000000000200001EDA74
-:102C70000000000000000002000012B00008000088
-:102C800000000008800000000000000000000000BC
-:102C90008000000000000000000000008000000034
-:102CA00000000000000000008000000000000000A4
-:102CB0000000000080000000000000000000000094
-:102CC0008000000000000000000000008000000004
-:102CD0000000000000000000800000000000000074
-:102CE0000000000080000000000000000000000064
-:102CF00000000000000000000000000000000000D4
-:102D000000000000000000000000000000000000C3
-:102D100000000000000000000000000000000000B3
-:102D20000000000000000000000000008000000023
-:102D30000000000000000000800000000000000013
-:102D40000000000000000000000000000000000083
-:102D50008000000000000000000000008000000073
-:102D600000000000000000008000000000000000E3
-:102D700000000000800000000000000000000000D3
-:102D80000000B00000180000000000180000B300B0
-:102D900000400000000000400000B30000400002BE
-:102DA000000000010000B30100400002000000002C
-:102DB0000000800000400000000000408000000093
-:102DC000000000000000000000008000000800403B
-:102DD000000000040000800400080040000000041F
-:102DE0000000BB0000280000000000280000BC40DC
-:102DF00000100000000000100000880000800000AB
-:102E00000000008000008800000800800000000230
-:102E100000008C00002000000000002000002008BE
-:102E20000010000000000010000020000000000062
-:102E30000000000800001108000800000000000861
-:102E4000000011680008000000000008000011A840
-:102E500000080000000000080000127000080000D8
-:102E600000000001000012710008000000000001D5
-:102E700000008D000010000400000004000013207A
-:102E80000030001800000010000013280030001867
-:102E900000000002800000000000000000000000B0
-:102EA000800000000000000000000000000011E8A9
-:102EB0000000000000000001800000000000000091
-:102EC0000000000080000000000000000000000082
-:102ED00080000000000000000000000080000000F2
-:102EE0000000000000000000800000000000000062
-:102EF0000000000080000000000000000000000052
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000000000000B1
-:102F200000000000000000000000000000000000A1
-:102F30008000000000000000000000008000000091
-:102F40000000000000000000000000000000000081
-:102F500000000000000083080080000000000080E6
-:102F60000000000100000000000000000000200838
-:102F70000010000000000010000020000000000011
-:102F80000000000800008D1000080000000000088C
-:102F900000008D7000080000000000080000845050
-:102FA000046000280000046000008EA000080000FB
-:102FB0000000000100008EA10008000000000001D8
-:102FC0000000840800080000000000080000844899
-:102FD000000000000000000100008DF40008000067
-:102FE0000000000200008DF6000800000000000252
-:102FF00000008E04001000000000000480000000AB
-:103000000000000000000000800000000000000040
-:103010000000000080000000000000000000000030
-:1030200000000000000000000000000000000000A0
-:103030000000000000000000000000000000000090
-:103040000000000000000000000000000000000080
-:103050008000000000000000000000008000000070
-:103060000000000000000000000000000000000060
-:1030700000000000800000000000000000000000D0
-:103080008000000000000000000000008000000040
-:1030900000000000000000008000000000000000B0
-:1030A00000000000000030000040000000000008A8
-:1030B00000003008004000000000002800003390AD
-:1030C00001C00010000000080000320000200000D5
-:1030D0000000002000003720000000000000000871
-:1030E0000000102006200038000000080000A000AA
-:1030F000000000000000200000003EA900000000C9
-:103100000000000100003EC80000000000000002B6
-:1031100000001C4000E000080000000880000000E3
-:103120000000000000000000000040000008000057
-:103130000000000100004001000800000000000144
-:103140000000404000080004000000020000406051
-:103150000008000400000004000040000008000017
-:10316000000000040000400400080000000000040B
-:10317000000040400000000000000008000040483F
-:1031800000000000000000080000800000000000B7
-:103190000000001000005040000100040000000189
-:1031A0000000500000000000000000200000500857
-:1031B00000100000000000040000500C001000008F
-:1031C00000000001000052C70000000000000001E4
-:1031D000000052C6000000000000000100003000A6
-:1031E0000030001800000004000030040030001817
-:1031F0000000000400003008003000180000000249
-:103200000000300A00300018000000020000300CFE
-:1032100000300018000000010000300D00300018E0
-:10322000000000010000300E003000180000000116
-:1032300000003010003000180000000400003014BE
-:103240000030001800000004000050000100008061
-:103250000008000400005004010000800008000481
-:103260000000000A0000000000000000000050689C
-:103270000100008000000001000050690100008092
-:10328000000000010000506C0100008000000002FE
-:103290000000506E0100008000000002000050702D
-:1032A0000100008000000004000050740100008054
-:1032B00000000004000050660100008000000002D1
-:1032C0000000506401000080000000010000506018
-:1032D0000100008000000002000050620100008038
-:1032E00000000002000050500100008000000004B7
-:1032F00000005054010000800000000400005058FD
-:1033000001000080000000040000505C010000800B
-:10331000000000040000507C01000080000000015B
-:103320000000507D010000800000000100004018F6
-:103330000010000000000004000040900010000099
-:10334000000000040000409800100000000000048D
-:1033500000004110000000000000000200004112C7
-:103360000000000000000002000041140000000006
-:1033700000000002000041160000000000000002F2
-:1033800000006040000800000000000200006042F1
-:103390000008000000000002000060440008000077
-:1033A0000000000400006080000800000000000829
-:1033B000000060C00040000800000008000060003D
-:1033C0000008000000000002000060020008000089
-:1033D000000000010000600400080000000000027E
-:1033E0000000634000080000000000080000638047
-:1033F00000080000000000040000638400080000D2
-:1034000000000001000063C000080000000000028E
-:10341000000063C400080000000000020000640017
-:103420000008000000000004000070000010000010
-:103430000000000400007004001000000000000400
-:103440000000700800100000000000040000700080
-:1034500000080000000000020000700200080000E8
-:1034600000000001000070040008000000000002DD
-:1034700000007040000800000000000200007044DE
-:103480000008000000000002000070460008000074
-:10349000000000020000764800080000000000085C
-:1034A000000070800008000000000002000070842E
-:1034B00000080000000000020000768800080000FC
-:1034C000000000080000804000080000000000012B
-:1034D0000000804100080000000000010000804260
-:1034E0000008000000000001000080430008000008
-:1034F0000000000100008000000800000000000241
-:1035000000008002000800000000000100008004AC
-:103510000008000000000002000080C00008000059
-:1035200000000002000080C200080000000000024D
-:10353000000080C40008000000000002000080803D
-:103540000008000000000001000080810008000069
-:10355000000000010000808200080000000000015F
-:10356000000080830008000000000001000080844B
-:103570000008000000000001000080850008000035
-:10358000000000010000808600080000000000012B
-:10359000000060000008000000000002000060025F
-:1035A00000080000000000010000600400080000A6
-:1035B000000000020000604200C00018000000028D
-:1035C0000000604000C00018000000020000604CD5
-:1035D00000C00018000000080000604400C000188F
-:1035E000000000080000605700C000180000000143
-:1035F0000000605400C00018000000020000605687
-:1036000000C0001800000001000066400008000033
-:1036100000000008000066800008000000000008AC
-:10362000000066C000080000000000080000D94249
-:1036300000180000000000020000DE400000000052
-:10364000000000000000E000000000000000000496
-:103650000000DD4000000000000000040000DD4428
-:1036600000000000000000040000DD480000000031
-:10367000000000040000DD4C000000000000000419
-:103680000000DD5000000000000000040000DD54D8
-:1036900000000000000000040000DD5800000000F1
-:1036A000000000040000DD400000000000000020D9
-:1036B0000000DA0000000000000000040000DA0052
-:1036C00000000000000000680000BB600000000077
-:1036D000000000000000D000000000000000000416
-:1036E0000000B0C000000000000000040000B0C4F2
-:1036F00000000000000000040000B0C8000000004E
-:10370000000000040000B0C0000000000000001035
-:103710000000D6B000000000000000040000D6B495
-:1037200000000000000000040000D6B80000000007
-:10373000000000040000D6BC0000000000000004EF
-:103740000000D6B000000000000000100000D348C8
-:1037500000000000000000080000D3580000000036
-:1037600000000080000000100000000000000000C9
-:103770000000D35800000000000000080000000016
-:08378000060205000000000034
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw.ihex b/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw.ihex
new file mode 100644
index 0000000..ba1ce53
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw.ihex
@@ -0,0 +1,13192 @@
+:1000000000004F48000000680000070C00004FB8D7
+:1000100000001ED4000056C800000094000075A027
+:1000200000009F4C00007638000000CC00011588CD
+:100030000000DC5800011658000000940001F2B8DE
+:100040000000400C0001F350000000A400023360E7
+:100050000000F4240002340800000FFC00032830E4
+:100060000000000400033830020400480000000FC4
+:1000700002040054000000450204005C0000000679
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:10018000020400140000007F02040018000000FFB9
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200604203C0000001FBB
+:10024000020420B800000001060420BC0000005F8A
+:100250000204223807FFFFFF0204223C0000003F97
+:100260000204224007FFFFFF020422440000000FA7
+:1002700001042248000000000104224C000000009C
+:10028000010422500000000001042254000000007C
+:1002900001042258000000000104225C000000005C
+:1002A000010422600000000001042264000000003C
+:1002B00001042268000000000104226C000000001C
+:1002C00001042270000000000104227400000000FC
+:1002D00001042278000000000104227C00000000DC
+:1002E0000C042000000003E80A04200000000001C4
+:1002F0000B0420000000000A0605400000000D006D
+:100300000205004400000020020500480000003201
+:10031000020500900215002002050094021500203D
+:1003200002050098000000300205009C0810000043
+:10033000020500A000000033020500A40000003008
+:10034000020500A800000031020500AC0000000218
+:10035000020500B000000005020500B40000000620
+:10036000020500B800000002020500BC0000000207
+:10037000020500C000000000020500C400000005E6
+:10038000020500C800000002020500CC00000002C7
+:10039000020500D000000002020500D400000001A8
+:1003A00002050114000000010205011C000000010B
+:1003B0000205012000000002020502040000000105
+:1003C0000205020C0000004002050210000000407F
+:1003D0000205021C0000002002050220000000139C
+:1003E0000205022400000020060502400000000A69
+:1003F00004050280002000000205005000000007F4
+:10040000020500540000000702050058000000002B
+:100410000205005C00000008020500600000000109
+:100420000605006400000003020500D80000000675
+:1004300002050004000000010205000800000001A0
+:100440000205000C00000001020500100000000180
+:100450000205001400000001020500180000000160
+:100460000205001C00000001020500200000000140
+:100470000205002400000001020500280000000120
+:100480000205002C00000001020500300000000100
+:1004900002050034000000010205003800000001E0
+:1004A0000205003C000000010205004000000001C0
+:1004B000020500E00000000D020500E80000000059
+:1004C000020500F000000000020500F80000000036
+:1004D000020500E40000002D020500EC00000020F1
+:1004E000020500F400000020020500FC00000020CE
+:1004F000020500E00000001D020500E800000010F9
+:10050000020500F000000010020500F800000010D5
+:10051000020500E40000003D020500EC0000003090
+:10052000020500F400000030020500FC000000306D
+:10053000020500E00000004D020500E80000004058
+:10054000020500F000000040020500F80000004035
+:10055000020500E40000006D020500EC00000060F0
+:10056000020500F400000060020500FC00000060CD
+:10057000020500E00000005D020500E800000050F8
+:10058000020500F000000050020500F800000050D5
+:10059000020500E40000007D020500EC0000007090
+:1005A000020500F400000070020500FC000000706D
+:1005B0000406100002000020020600DC000000011A
+:1005C000010600D80000000004060200000302201B
+:1005D000020600DC00000000010600B80000000078
+:1005E000010600C8000000000206016C00000000C7
+:1005F000010600BC00000000010600CC0000000065
+:1006000002060170000000000718040000910000BD
+:10061000081807D800050223071C00002BF700006C
+:10062000071C80002DD10AFE071D00002F461673FF
+:10063000071D800016342245081DB13049DA022515
+:100640000118000000000000011800040000000074
+:1006500001180008000000000118000C0000000054
+:100660000118001000000000011800140000000034
+:1006700002180020000000010218002400000002FF
+:1006800002180028000000030218002C00000000DF
+:1006900002180030000000040218003400000001BD
+:1006A00002180038000000000218003C00000001A1
+:1006B000021800400000000402180044000000007E
+:1006C00002180048000000010218004C000000035E
+:1006D0000218005000000000021800540000000141
+:1006E00002180058000000040218005C000000001E
+:1006F00002180060000000010218006400000003FE
+:1007000002180068000000000218006C00000001E0
+:1007100002180070000000040218007400000000BD
+:1007200002180078000000040218007C000000039A
+:100730000618008000000002021800A400003FFF1D
+:10074000021800A8000003FF0218022400000000A5
+:1007500002180234000000000218024C00000000E1
+:10076000021802E4000000FF061810000000040058
+:10077000021B8BC000000001021B8000000000343F
+:10078000021B804000000018021B80800000000C4B
+:10079000021B80C0000000200C1B83000007A1206A
+:1007A0000A1B8300000001380B1B83000000138824
+:1007B0000A1B8340000000000C1B8340000001F472
+:1007C0000B1B834000000005021B83800007A12053
+:1007D000021B83C0000001F4021B14800000000112
+:1007E0000A1B148000000000061A1000000003B36A
+:1007F000041A1ECC00010227061A1ED000000008B1
+:10080000061A2008000000C8061A20000000000296
+:10081000041AAF4000100228061A3718000000041E
+:10082000061A371000000002061A500000000002ED
+:10083000061A500800000004061A501800000004B0
+:10084000061A502800000004061A50380000000460
+:10085000061A504800000004061A50580000000410
+:10086000061A506800000004061A507800000002C2
+:10087000041A52C000020238061A40500000000656
+:10088000041A40680002023A041A40400004023C84
+:10089000041A800000010240061A800400000003D0
+:1008A000041A801000010241061A8014000000039F
+:1008B000041A802000010242061A8024000000036E
+:1008C000041A803000010243061A8034000000033D
+:1008D000041A804000010244061A8044000000030C
+:1008E000041A805000010245061A805400000003DB
+:1008F000041A806000010246061A806400000003AA
+:10090000041A807000010247061A80740000000378
+:10091000041A808000010248061A80840000000347
+:10092000041A809000010249061A80940000000316
+:10093000041A80A00001024A061A80A400000003E5
+:10094000041A80B00001024B061A80B400000003B4
+:10095000041A80C00001024C061A80C40000000383
+:10096000041A80D00001024D061A80D40000000352
+:10097000041A80E00001024E061A80E40000000321
+:10098000041A80F00001024F061A80F400000003F0
+:10099000041A810000010250061A810400000003BD
+:1009A000041A811000010251061A8114000000038C
+:1009B000041A812000010252061A8124000000035B
+:1009C000041A813000010253061A8134000000032A
+:1009D000041A814000010254061A814400000003F9
+:1009E000041A815000010255061A815400000003C8
+:1009F000041A816000010256061A81640000000397
+:100A0000041A817000010257061A81740000000365
+:100A1000041A818000010258061A81840000000334
+:100A2000041A819000010259061A81940000000303
+:100A3000041A81A00001025A061A81A400000003D2
+:100A4000041A81B00001025B061A81B400000003A1
+:100A5000041A81C00001025C061A81C40000000370
+:100A6000041A81D00001025D061A81D4000000033F
+:100A7000041A81E00001025E061A81E4000000030E
+:100A8000041A81F00001025F061A81F400000003DD
+:100A9000041A820000010260061A820400000003AA
+:100AA000041A821000010261061A82140000000379
+:100AB000041A822000010262061A82240000000348
+:100AC000041A823000010263061A82340000000317
+:100AD000041A824000010264061A824400000003E6
+:100AE000041A825000010265061A825400000003B5
+:100AF000041A826000010266061A82640000000384
+:100B0000041A827000010267061A82740000000352
+:100B1000041A828000010268061A82840000000321
+:100B2000041A829000010269061A829400000003F0
+:100B3000041A82A00001026A061A82A400000003BF
+:100B4000041A82B00001026B061A82B4000000038E
+:100B5000041A82C00001026C061A82C4000000035D
+:100B6000041A82D00001026D061A82D4000000032C
+:100B7000041A82E00001026E061A82E400000003FB
+:100B8000041A82F00001026F061A82F400000003CA
+:100B9000041A830000010270061A83040000000397
+:100BA000041A831000010271061A83140000000366
+:100BB000041A832000010272061A83240000000335
+:100BC000041A833000010273061A83340000000304
+:100BD000041A834000010274061A834400000003D3
+:100BE000041A835000010275061A835400000003A2
+:100BF000041A836000010276061A83640000000371
+:100C0000041A837000010277061A8374000000033F
+:100C1000041A838000010278061A8384000000030E
+:100C2000041A839000010279061A839400000003DD
+:100C3000041A83A00001027A061A83A400000003AC
+:100C4000041A83B00001027B061A83B4000000037B
+:100C5000041A83C00001027C061A83C4000000034A
+:100C6000041A83D00001027D061A83D40000000319
+:100C7000041A83E00001027E061A83E400000003E8
+:100C8000041A83F00001027F061A83F400000003B7
+:100C9000041A840000010280061A84040000000384
+:100CA000041A841000010281061A84140000000353
+:100CB000041A842000010282061A84240000000322
+:100CC000041A843000010283061A843400000003F1
+:100CD000041A844000010284061A844400000003C0
+:100CE000041A845000010285061A8454000000038F
+:100CF000041A846000010286061A8464000000035E
+:100D0000041A847000010287061A8474000000032C
+:100D1000041A848000010288061A848400000003FB
+:100D2000041A849000010289061A849400000003CA
+:100D3000041A84A00001028A061A84A40000000399
+:100D4000041A84B00001028B061A84B40000000368
+:100D5000041A84C00001028C061A84C40000000337
+:100D6000041A84D00001028D061A84D40000000306
+:100D7000041A84E00001028E061A84E400000003D5
+:100D8000041A84F00001028F061A84F400000003A4
+:100D9000041A850000010290061A85040000000371
+:100DA000041A851000010291061A85140000000340
+:100DB000041A852000010292061A8524000000030F
+:100DC000041A853000010293061A853400000003DE
+:100DD000041A854000010294061A854400000003AD
+:100DE000041A855000010295061A8554000000037C
+:100DF000041A856000010296061A8564000000034B
+:100E0000041A857000010297061A85740000000319
+:100E1000041A858000010298061A858400000003E8
+:100E2000041A859000010299061A859400000003B7
+:100E3000041A85A00001029A061A85A40000000386
+:100E4000041A85B00001029B061A85B40000000355
+:100E5000041A85C00001029C061A85C40000000324
+:100E6000041A85D00001029D061A85D400000003F3
+:100E7000041A85E00001029E061A85E400000003C2
+:100E8000041A85F00001029F061A85F40000000391
+:100E9000041A8600000102A0061A8604000000035E
+:100EA000041A8610000102A1061A8614000000032D
+:100EB000041A8620000102A2061A862400000003FC
+:100EC000041A8630000102A3061A863400000003CB
+:100ED000041A8640000102A4061A8644000000039A
+:100EE000041A8650000102A5061A86540000000369
+:100EF000041A8660000102A6061A86640000000338
+:100F0000041A8670000102A7061A86740000000306
+:100F1000041A8680000102A8061A868400000003D5
+:100F2000041A8690000102A9061A869400000003A4
+:100F3000041A86A0000102AA061A86A40000000373
+:100F4000041A86B0000102AB061A86B40000000342
+:100F5000041A86C0000102AC061A86C40000000311
+:100F6000041A86D0000102AD061A86D400000003E0
+:100F7000041A86E0000102AE061A86E400000003AF
+:100F8000041A86F0000102AF061A86F4000000037E
+:100F9000041A8700000102B0061A8704000000034B
+:100FA000041A8710000102B1061A8714000000031A
+:100FB000041A8720000102B2061A872400000003E9
+:100FC000041A8730000102B3061A873400000003B8
+:100FD000041A8740000102B4061A87440000000387
+:100FE000041A8750000102B5061A87540000000356
+:100FF000041A8760000102B6061A87640000000325
+:10100000041A8770000102B7061A877400000003F3
+:10101000041A8780000102B8061A878400000003C2
+:10102000041A8790000102B9061A87940000000391
+:10103000041A87A0000102BA061A87A40000000360
+:10104000041A87B0000102BB061A87B4000000032F
+:10105000041A87C0000102BC061A87C400000003FE
+:10106000041A87D0000102BD061A87D400000003CD
+:10107000041A87E0000102BE061A87E4000000039C
+:10108000041A87F0000102BF061A87F4000000036B
+:10109000041A8800000102C0061A88040000000338
+:1010A000041A8810000102C1061A88140000000307
+:1010B000041A8820000102C2061A882400000003D6
+:1010C000041A8830000102C3061A883400000003A5
+:1010D000041A8840000102C4061A88440000000374
+:1010E000041A8850000102C5061A88540000000343
+:1010F000041A8860000102C6061A88640000000312
+:10110000041A8870000102C7061A887400000003E0
+:10111000041A8880000102C8061A888400000003AF
+:10112000041A8890000102C9061A8894000000037E
+:10113000041A88A0000102CA061A88A4000000034D
+:10114000041A88B0000102CB061A88B4000000031C
+:10115000041A88C0000102CC061A88C400000003EB
+:10116000041A88D0000102CD061A88D400000003BA
+:10117000041A88E0000102CE061A88E40000000389
+:10118000041A88F0000102CF061A88F40000000358
+:10119000041A8900000102D0061A89040000000325
+:1011A000041A8910000102D1061A891400000003F4
+:1011B000041A8920000102D2061A892400000003C3
+:1011C000041A8930000102D3061A89340000000392
+:1011D000041A8940000102D4061A89440000000361
+:1011E000041A8950000102D5061A89540000000330
+:1011F000041A8960000102D6061A896400000003FF
+:10120000041A8970000102D7061A897400000003CD
+:10121000041A8980000102D8061A8984000000039C
+:10122000041A8990000102D9061A8994000000036B
+:10123000041A89A0000102DA061A89A4000000033A
+:10124000041A89B0000102DB061A89B40000000309
+:10125000041A89C0000102DC061A89C400000003D8
+:10126000041A89D0000102DD061A89D400000003A7
+:10127000041A89E0000102DE061A89E40000000376
+:10128000041A89F0000102DF061A89F40000000345
+:10129000041A8A00000102E0061A8A040000000312
+:1012A000041A8A10000102E1061A8A1400000003E1
+:1012B000041A8A20000102E2061A8A2400000003B0
+:1012C000041A8A30000102E3061A8A34000000037F
+:1012D000041A8A40000102E4061A8A44000000034E
+:1012E000041A8A50000102E5061A8A54000000031D
+:1012F000041A8A60000102E6061A8A6400000003EC
+:10130000041A8A70000102E7061A8A7400000003BA
+:10131000041A8A80000102E8061A8A840000000389
+:10132000041A8A90000102E9061A8A940000000358
+:10133000041A8AA0000102EA061A8AA40000000327
+:10134000041A8AB0000102EB061A8AB400000003F6
+:10135000041A8AC0000102EC061A8AC400000003C5
+:10136000041A8AD0000102ED061A8AD40000000394
+:10137000041A8AE0000102EE061A8AE40000000363
+:10138000041A8AF0000102EF061A8AF40000000332
+:10139000041A8B00000102F0061A8B0400000003FF
+:1013A000041A8B10000102F1061A8B1400000003CE
+:1013B000041A8B20000102F2061A8B24000000039D
+:1013C000041A8B30000102F3061A8B34000000036C
+:1013D000041A8B40000102F4061A8B44000000033B
+:1013E000041A8B50000102F5061A8B54000000030A
+:1013F000041A8B60000102F6061A8B6400000003D9
+:10140000041A8B70000102F7061A8B7400000003A7
+:10141000041A8B80000102F8061A8B840000000376
+:10142000041A8B90000102F9061A8B940000000345
+:10143000041A8BA0000102FA061A8BA40000000314
+:10144000041A8BB0000102FB061A8BB400000003E3
+:10145000041A8BC0000102FC061A8BC400000003B2
+:10146000041A8BD0000102FD061A8BD40000000381
+:10147000041A8BE0000102FE061A8BE40000000350
+:10148000041A8BF0000102FF061A8BF4000000031F
+:10149000041A8C0000010300061A8C0400000003EB
+:1014A000041A8C1000010301061A8C1400000003BA
+:1014B000041A8C2000010302061A8C240000000389
+:1014C000041A8C3000010303061A8C340000000358
+:1014D000041A8C4000010304061A8C440000000327
+:1014E000041A8C5000010305061A8C5400000003F6
+:1014F000041A8C6000010306061A8C6400000003C5
+:10150000041A8C7000010307061A8C740000000393
+:10151000041A8C8000010308061A8C840000000362
+:10152000041A8C9000010309061A8C940000000331
+:10153000041A8CA00001030A061A8CA40000000300
+:10154000041A8CB00001030B061A8CB400000003CF
+:10155000041A8CC00001030C061A8CC4000000039E
+:10156000041A8CD00001030D061A8CD4000000036D
+:10157000041A8CE00001030E061A8CE4000000033C
+:10158000041A8CF00001030F061A8CF4000000030B
+:10159000041A8D0000010310061A8D0400000003D8
+:1015A000041A8D1000010311061A8D1400000003A7
+:1015B000041A8D2000010312061A8D240000000376
+:1015C000041A8D3000010313061A8D340000000345
+:1015D000041A8D4000010314061A8D440000000314
+:1015E000041A8D5000010315061A8D5400000003E3
+:1015F000041A8D6000010316061A8D6400000003B2
+:10160000041A8D7000010317061A8D740000000380
+:10161000041A8D8000010318061A8D84000000034F
+:10162000041A8D9000010319061A8D94000000031E
+:10163000041A8DA00001031A061A8DA400000003ED
+:10164000041A8DB00001031B061A8DB400000003BC
+:10165000041A8DC00001031C061A8DC4000000038B
+:10166000041A8DD00001031D061A8DD4000000035A
+:10167000041A8DE00001031E061A8DE40000000329
+:10168000041A8DF00001031F061A8DF400000003F8
+:10169000041A8E0000010320061A8E0400000003C5
+:1016A000041A8E1000010321061A8E140000000394
+:1016B000041A8E2000010322061A8E240000000363
+:1016C000041A8E3000010323061A8E340000000332
+:1016D000041A8E4000010324061A8E440000000301
+:1016E000041A8E5000010325061A8E5400000003D0
+:1016F000041A8E6000010326061A8E64000000039F
+:10170000041A8E7000010327061A8E74000000036D
+:10171000041A8E8000010328061A8E84000000033C
+:10172000041A8E9000010329061A8E94000000030B
+:10173000041A8EA00001032A061A8EA400000003DA
+:10174000041A8EB00001032B061A8EB400000003A9
+:10175000041A8EC00001032C061A8EC40000000378
+:10176000041A8ED00001032D061A8ED40000000347
+:10177000041A8EE00001032E061A8EE40000000316
+:10178000041A8EF00001032F061A8EF400000003E5
+:10179000041A8F0000010330061A8F0400000003B2
+:1017A000041A8F1000010331061A8F140000000381
+:1017B000041A8F2000010332061A8F240000000350
+:1017C000041A8F3000010333061A8F34000000031F
+:1017D000041A8F4000010334061A8F4400000003EE
+:1017E000041A8F5000010335061A8F5400000003BD
+:1017F000041A8F6000010336061A8F64000000038C
+:10180000041A8F7000010337061A8F74000000035A
+:10181000041A8F8000010338061A8F840000000329
+:10182000041A8F9000010339061A8F9400000003F8
+:10183000041A8FA00001033A061A8FA400000003C7
+:10184000041A8FB00001033B061A8FB40000000396
+:10185000041A8FC00001033C061A8FC40000000365
+:10186000041A8FD00001033D061A8FD40000000334
+:10187000041A8FE00001033E061A8FE400000007FF
+:10188000041A62C00020033F061AD0000000007254
+:10189000061AD24800000010061AD6B00000002038
+:1018A000061AD47000000090061AD46800000002E6
+:1018B000061AA000000001C4061A30000000001043
+:1018C000061A308000000010061A310000000010D7
+:1018D000061A318000000010061A330000000012C2
+:1018E000061A339000000070061AD4580000000257
+:1018F000061AD34800000002061AD3580000002040
+:10190000061AA710000001C4061A3040000000109B
+:10191000061A30C000000010061A31400000001006
+:10192000061A31C000000010061A334800000012E9
+:10193000061A355000000070061AD460000000023C
+:10194000061AD35000000002061AD3D80000002067
+:10195000021AAE2000000000061A5000000000022B
+:10196000061A508000000012041A40000002035FB3
+:10197000041A63C000020361061A7000000000042C
+:10198000061A320000000008021AAE24000000000F
+:10199000061A501000000002061A50C8000000127B
+:1019A000041A400800020363041A63C800020365B6
+:1019B000061A701000000004061A32200000000809
+:1019C000021AAE2800000000061A50200000000293
+:1019D000061A511000000012041A4010000203679A
+:1019E000041A63D000020369061A70200000000484
+:1019F000061A324000000008021AAE2C0000000057
+:101A0000061A503000000002061A51580000001259
+:101A1000041A40180002036B041A63D80002036D15
+:101A2000061A703000000004061A32600000000838
+:101A3000021AAE3000000000061A504000000002FA
+:101A4000061A51A000000012041A40200002036F81
+:101A5000041A63E000020371061A704000000004DB
+:101A6000061A328000000008021AAE34000000009E
+:101A7000061A505000000002061A51E80000001239
+:101A8000041A402800020373041A63E80002037575
+:101A9000061A705000000004061A32A00000000868
+:101AA000021AAE3800000000061A50600000000262
+:101AB000061A523000000012041A40300002037768
+:101AC000041A63F000020379061A70600000000433
+:101AD000061A32C000000008021AAE3C00000000E6
+:101AE000061A507000000002061A52780000001218
+:101AF000041A40380002037B041A63F80002037DD5
+:101B0000061A707000000004061A32E00000000897
+:101B10000200A468000B01C80200A294071D29114D
+:101B20000200A298000000000200A29C009C042475
+:101B30000200A2A0000000000200A2A4000002090E
+:101B40000200A270000000000200A2740000000069
+:101B50000200A270000000000200A2740000000059
+:101B60000200A270000000000200A2740000000049
+:101B70000200A270000000000200A2740000000039
+:101B8000020160A000000001020160A400000262E6
+:101B9000020160A800000002020160AC0000001811
+:101BA0000201620400000001020100B40000000113
+:101BB000020100B800000001020100DC0000000189
+:101BC0000201010000000001020101040000000107
+:101BD0000201007C003000000201008400000028A7
+:101BE0000201008C0000000002010130000000042E
+:101BF0000201025C00000001020103280000000055
+:101C0000020160580000FFFF020160700000000741
+:101C10000201608000000001020105540000003054
+:101C2000020100C400000001020100CC000000011C
+:101C3000020100F800000001020100F000000001B4
+:101C4000020100800030000002010088000000282E
+:101C500002010090000000000201013400000004B5
+:101C6000020102DC000000010201032C0000000060
+:101C70000201605C0000FFFF0201607400000007C9
+:101C800002016084000000010201056400000030D0
+:101C9000020100C800000001020100D000000001A4
+:101CA000020100FC00000001020100F4000000013C
+:101CB000020C100000000028020C20080000021195
+:101CC000020C200C00000200020C20100000020494
+:101CD000020C201C0000FFFF020C20200000FFFF70
+:101CE000020C20240000FFFF020C20280000FFFF50
+:101CF000020C203800000020020C203C00000021D3
+:101D0000020C204000000022020C204400000023AE
+:101D1000020C204800000024020C204C000000258A
+:101D2000020C205000000026020C20540000002766
+:101D3000020C205800000028020C205C0000002942
+:101D4000020C20600000002A020C20640000002B1E
+:101D5000020C20680000002C020C206C0000002DFA
+:101D6000020C20700000002E020C20740000002FD6
+:101D7000020C207800000010060C207C00000007F8
+:101D8000020C209800000011020C209C00000012A0
+:101D9000020C20A000000013060C20A40000001D6F
+:101DA000020C211800000001020C211C000000019F
+:101DB000020C212000000001060C21240000001D5F
+:101DC000020C219800000001060C219C0000000775
+:101DD000020C21B800000001020C21BC000000012F
+:101DE000020C21C000000001020C21C4000000010F
+:101DF000020C21C800000001020C21CC00000001EF
+:101E0000020C21D000000001020C21D400000001CE
+:101E1000020C21D800000001020C21DC00000001AE
+:101E2000020C21E000000001020C21E4000000018E
+:101E3000020C21E800000001020C21EC000000016E
+:101E4000020C21F000000001020C21F4000000014E
+:101E5000020C21F800000001060C21FC0000000724
+:101E6000020C221800000001060C221C00000007D2
+:101E7000020C223807FFFFFF020C223C0000003F4B
+:101E8000020C224007FFFFFF020C22440000000F5B
+:101E9000010C224800000000010C224C0000000050
+:101EA000010C225000000000010C22540000000030
+:101EB000010C225800000000010C225C0000000010
+:101EC000010C226000000000010C226400000000F0
+:101ED000010C226800000000010C226C00000000D0
+:101EE000010C227000000000010C227400000000B0
+:101EF000010C227800000000010C227C0000000090
+:101F00000C0C2000000003E80A0C20000000000177
+:101F10000B0C20000000000A020C40080000101109
+:101F2000020C400C00001000020C401000001004D5
+:101F3000020C401400001021020C401C0000FFFFA6
+:101F4000020C40200000FFFF020C40240000FFFFB5
+:101F5000020C40280000FFFF020C40380000004641
+:101F6000020C403C00000010060C40400000000243
+:101F7000020C404800000018020C404C000000F029
+:101F8000060C40500000001F020C40CC0000000175
+:101F9000060C40D00000003A020C41B800000001DD
+:101FA000060C41BC00000003020C41C80000000107
+:101FB000020C41CC00000001060C41D00000001AC8
+:101FC000020C423807FFFFFF020C423C0000003FBA
+:101FD000020C424007FFFFFF020C42440000000FCA
+:101FE000010C424800000000010C424C00000000BF
+:101FF000010C425000000000010C4254000000009F
+:10200000010C425800000000010C425C000000007E
+:10201000010C426000000000010C4264000000005E
+:10202000010C426800000000010C426C000000003E
+:10203000010C427000000000010C4274000000001E
+:10204000010C427800000000010C427C00000000FE
+:10205000010C4280000000000C0C4000000003E86E
+:102060000A0C4000000000010B0C40000000000AB8
+:10207000060D400000000A00020D0044000000327E
+:10208000020D008C02150020020D009002150020A8
+:10209000020D009408100000020D009800000033AB
+:1020A000020D009C00000002020D00A000000000D4
+:1020B000020D00A400000005020D00A800000005AC
+:1020C000060D00AC00000002020D00B4000000028A
+:1020D000020D00B800000003020D00BC0000000269
+:1020E000020D00C000000001020D00C80000000247
+:1020F000020D00CC00000002020D015C0000000196
+:10210000020D016400000001020D016800000002E0
+:10211000020D020400000001020D020C000000206C
+:10212000020D021000000040020D021400000040E9
+:10213000020D022000000003020D0224000000181E
+:10214000060D028000000012040D03000018037F3A
+:10215000060D03600000000C020D004C00000001A1
+:10216000020D005000000002020D005400000000AB
+:10217000020D005800000008060D005C000000047D
+:10218000020D00C400000004020D00040000000164
+:10219000020D000800000001020D000C000000010B
+:1021A000020D001000000001020D001400000001EB
+:1021B000020D001800000001020D001C00000001CB
+:1021C000020D002000000001020D002400000001AB
+:1021D000020D002800000001020D002C000000018B
+:1021E000020D003000000001020D0034000000016B
+:1021F000020D003800000001020D003C000000014B
+:10220000020D011400000009020D011C0000000A6B
+:10221000020D012400000000020D012C000000004E
+:10222000020D013400000000020D013C0000000B13
+:10223000020D014400000000020D011800000029F9
+:10224000020D01200000002A020D012800000020DC
+:10225000020D013000000020020D013800000020B6
+:10226000020D01400000002B020D0148000000207B
+:10227000020D011400000019020D011C0000001ADB
+:10228000020D012400000010020D012C00000010BE
+:10229000020D013400000010020D013C0000001B83
+:1022A000020D014400000010020D01180000003969
+:1022B000020D01200000003A020D0128000000304C
+:1022C000020D013000000030020D01380000003026
+:1022D000020D01400000003B020D014800000030EB
+:1022E000020D011400000049020D011C0000004A0B
+:1022F000020D012400000040020D012C00000040EE
+:10230000020D013400000040020D013C0000004BB2
+:10231000020D014400000040020D01180000006998
+:10232000020D01200000006A020D0128000000607B
+:10233000020D013000000060020D01380000006055
+:10234000020D01400000006B020D0148000000601A
+:10235000020D011400000059020D011C0000005A7A
+:10236000020D012400000050020D012C000000505D
+:10237000020D013400000050020D013C0000005B22
+:10238000020D014400000050020D01180000007908
+:10239000020D01200000007A020D012800000070EB
+:1023A000020D013000000070020D013800000070C5
+:1023B000020D01400000007B020D0148000000708A
+:1023C000060E200000000800020E004C0000003243
+:1023D000020E009402150020020E00980215002043
+:1023E000020E009C00000030020E00A00810000049
+:1023F000020E00A400000033020E00A8000000300E
+:10240000020E00AC00000031020E00B0000000021D
+:10241000020E00B400000004020E00B8000000002C
+:10242000020E00BC00000002020E00C0000000020C
+:10243000020E00C400000000020E00C800000002EE
+:10244000020E00CC00000007020E00D000000002C7
+:10245000020E00D400000002020E00D800000001AD
+:10246000020E014400000001020E014C00000001B8
+:10247000020E015000000002020E020400000001E2
+:10248000020E020C00000040020E0210000000408C
+:10249000020E021C00000004020E022000000020B8
+:1024A000020E02240000000E020E02280000001B93
+:1024B000060E030000000012040E0280001B0397AA
+:1024C000060E02EC00000005020E00540000000C95
+:1024D000020E00580000000C020E005C000000001C
+:1024E000020E006000000010020E006400000010E8
+:1024F000060E006800000003020E00DC000000036E
+:10250000020E000400000001020E0008000000019D
+:10251000020E000C00000001020E0010000000017D
+:10252000020E001400000001020E0018000000015D
+:10253000020E001C00000001020E0020000000013D
+:10254000020E002400000001020E0028000000011D
+:10255000020E002C00000001020E003000000001FD
+:10256000020E003400000001020E003800000001DD
+:10257000020E003C00000001020E004000000001BD
+:10258000020E004400000001020E01100000000FC6
+:10259000020E011800000000020E012000000000E1
+:1025A000020E012800000000020E01140000002F9E
+:1025B000020E011C00000020020E01240000000099
+:1025C000020E012C00000000020E01100000001F8E
+:1025D000020E011800000010020E01200000000091
+:1025E000020E012800000000020E01140000003F4E
+:1025F000020E011C00000030020E01240000000049
+:10260000020E012C00000000020E01100000004F1D
+:10261000020E011800000040020E01200000000020
+:10262000020E012800000000020E01140000006FDD
+:10263000020E011C00000060020E012400000000D8
+:10264000020E012C00000000020E01100000005FCD
+:10265000020E011800000050020E012000000000D0
+:10266000020E012800000000020E01140000007F8D
+:10267000020E011C00000070020E01240000000088
+:10268000020E012C000000000730040000C9000009
+:10269000083007D8000503B207340000332B0000D0
+:1026A0000734800030A40CCB07350000351A18F52C
+:1026B000073580002A8A263C0736000018D830DF0C
+:1026C00008364630373A03B40130000000000000FD
+:1026D000013000040000000001300008000000008C
+:1026E0000130000C0000000001300010000000006C
+:1026F0000130001400000000023000200000000142
+:102700000230002400000002023000280000000314
+:102710000230002C000000000230003000000004F5
+:1027200002300034000000010230003800000000D8
+:102730000230003C000000010230004000000004B4
+:102740000230004400000000023000480000000198
+:102750000230004C00000003023000500000000076
+:102760000230005400000001023000580000000454
+:102770000230005C00000000023000600000000138
+:102780000230006400000003023000680000000016
+:102790000230006C000000010230007000000004F4
+:1027A00002300074000000000230007800000004D5
+:1027B0000230007C000000030630008000000002B0
+:1027C000023000A400003FFF023000A8000003FF19
+:1027D0000230022400000000023002340000000039
+:1027E0000230024C00000000023002E40000FFFF53
+:1027F000063020000000080002338BC000000001FA
+:10280000023380000000001A023380400000004EB6
+:102810000233808000000010023380C000000020DE
+:102820000C3383000007A1200A3383000000013825
+:102830000B338300000013880A338340000000003C
+:102840000C338340000001F40B338340000000058B
+:10285000023383800007A120023383C0000001F40B
+:1028600002331480000000010A33148000000000CD
+:10287000063280000000010206322008000000C875
+:10288000063220000000000204328EA0001003B6C1
+:1028900006323EB00000000606323ED800000002BC
+:1028A00006323E800000000A04323EA8000203C641
+:1028B00006323E00000000200632500000000400F6
+:1028C0000632400000000004043274C0000203C855
+:1028D00006324110000000020632D0000000003035
+:1028E0000632DD40000000440632DA00000000D06D
+:1028F0000632DEA0000000020632E0000000080000
+:1029000006328450000001180632100000000188D1
+:102910000632500000000020063251000000002066
+:102920000632520000000020063253000000002052
+:10293000063254000000002006325500000000203E
+:10294000063256000000002006325700000000202A
+:102950000632580000000020063259000000002016
+:1029600006325A000000002006325B000000002002
+:1029700006325C000000002006325D0000000020EE
+:1029800006325E000000002006325F0000000020DA
+:1029900006328DF00000000204328E00000203CAED
+:1029A00006328E08000000020632DE9000000002AF
+:1029B00006321C4000000038063288B000000118C2
+:1029C00006321620000001880632508000000020E8
+:1029D00006325180000000200632528000000020A4
+:1029E0000632538000000020063254800000002090
+:1029F000063255800000002006325680000000207C
+:102A00000632578000000020063258800000002067
+:102A1000063259800000002006325A800000002053
+:102A200006325B800000002006325C80000000203F
+:102A300006325D800000002006325E80000000202B
+:102A400006325F800000002006328DF80000000290
+:102A500004328E10000203CC06328E1800000002F1
+:102A60000632DE980000000206321D200000003809
+:102A700002328D50000000000632401000000002BB
+:102A800002328D5400000000063240200000000297
+:102A900002328D5800000000063240300000000273
+:102AA00002328D5C0000000006324040000000024F
+:102AB00002328D600000000006324050000000022B
+:102AC00002328D6400000000063240600000000207
+:102AD00002328D68000000000632407000000002E3
+:102AE00002328D6C000000000632408000000002BF
+:102AF000072004000091000008200780001003CE8A
+:102B0000072400002AFF00000724800015090AC0DE
+:102B10000824A9F0692803D001200000000000006B
+:102B20000120000400000000012000080000000057
+:102B30000120000C00000000012000100000000037
+:102B4000012000140000000002200020000000010D
+:102B500002200024000000020220002800000003E0
+:102B60000220002C000000000220003000000004C1
+:102B700002200034000000010220003800000000A4
+:102B80000220003C00000001022000400000000480
+:102B90000220004400000000022000480000000164
+:102BA0000220004C00000003022000500000000042
+:102BB0000220005400000001022000580000000420
+:102BC0000220005C00000000022000600000000104
+:102BD00002200064000000030220006800000000E2
+:102BE0000220006C000000010220007000000004C0
+:102BF00002200074000000000220007800000004A1
+:102C00000220007C0000000306200080000000027B
+:102C1000022000A400003FFF022000A8000003FFE4
+:102C20000220022400000000022002340000000004
+:102C30000220024C00000000022002E40000FFFF1E
+:102C4000062020000000080002238BC000000001C5
+:102C500002238000000000100223804000000012C8
+:102C60000223808000000030022380C00000000E9C
+:102C70000C2383000007A1200A23830000000138F1
+:102C80000B238300000013880A2383400000000008
+:102C90000C238340000001F40B2383400000000557
+:102CA000022383800007A120022383C0000001F4D7
+:102CB00002231480000000010A2314800000000099
+:102CC000062210000000004206222008000000C872
+:102CD00006222000000000020622B000000000C60C
+:102CE0000422B318000503D20622B32C0000000B07
+:102CF0000422B358000503D70622B36C0000000B72
+:102D00000422B398000503DC0622B3AC0000000BDC
+:102D10000422B3D8000503E10622B3EC0000000B47
+:102D20000422B418000503E60622B42C0000000BB0
+:102D30000422B458000503EB0622B46C0000000B1B
+:102D40000422B498000503F00622B4AC0000000B86
+:102D50000422B4D8000503F50622B4EC0000000BF1
+:102D60000422B518000503FA0622B52C0000000B5A
+:102D70000422B558000503FF0622B56C0000000BC5
+:102D80000422B598000504040622B5AC0000000B2F
+:102D90000422B5D8000504090622B5EC0000000B9A
+:102DA0000422B6180005040E0622B62C0000000B03
+:102DB0000422B658000504130622B66C0000000B6E
+:102DC0000422B698000504180622B6AC0000000BD9
+:102DD0000422B6D80005041D0622B6EC0000000B44
+:102DE0000422B718000504220622B72C0000000BAD
+:102DF0000422B758000504270622B76C0000000B18
+:102E00000422B7980005042C0622B7AC0000000B82
+:102E10000422B7D8000504310622B7EC0000000BED
+:102E20000422B818000504360622B82C0000000B56
+:102E30000422B8580005043B0622B86C0000000BC1
+:102E40000422B898000504400622B8AC0000000B2C
+:102E50000422B8D8000504450622B8EC0000000B97
+:102E60000422B9180005044A0622B92C0000000B00
+:102E70000422B9580005044F0622B96C0000000B6B
+:102E80000422B998000504540622B9AC0000000BD6
+:102E90000422B9D8000504590622B9EC0000000B41
+:102EA0000422BA180005045E0622BA2C0000000BAA
+:102EB0000422BA58000504630622BA6C0000000B15
+:102EC0000422BA98000504680622BAAC0000000B80
+:102ED0000422BAD80005046D0622BAEC00000005F1
+:102EE0000622BB00000000530422BC4C0001047207
+:102EF0000622BC50000000030422BC5C00010473E5
+:102F00000622BC60000000030422BC6C00010474B3
+:102F10000622BC70000000030422BC7C0001047582
+:102F20000622BC80000000030422BC8C0001047651
+:102F30000622BC90000000030422BC9C0001047720
+:102F40000622BCA0000000030422BCAC00010478EF
+:102F50000622BCB0000000030422BCBC00010479BE
+:102F60000622880000000100062280000000020006
+:102F7000042212700010047A06223000000000C003
+:102F800006226700000001000622900000000400F5
+:102F900004226B080020048A022212C0FFFFFFFFF8
+:102FA000062211E800000002062212C800000009F3
+:102FB000062212EC0000000906228C000000000826
+:102FC0000222114800000000062213200000000623
+:102FD000062233000000000206226040000000309C
+:102FE00006228C20000000080222114C0000000084
+:102FF00006221338000000060622330800000002F3
+:10300000062261000000003006228C40000000080B
+:10301000022211500000000006221350000000069A
+:103020000622331000000002062261C000000030BA
+:1030300006228C60000000080222115400000000EB
+:103040000622136800000006062233180000000262
+:10305000062262800000003006228C8000000008FA
+:103060000222115800000000062213800000000612
+:1030700006223320000000020622634000000030D8
+:1030800006228CA0000000080222115C0000000053
+:1030900006221398000000060622332800000002D2
+:1030A000062264000000003006228CC000000008E8
+:1030B0000222116000000000062213B0000000068A
+:1030C0000622333000000002062264C000000030F7
+:1030D00006228CE0000000080222116400000000BB
+:1030E000062213C800000006062233380000000242
+:1030F0000622658000000030021610000000002843
+:1031000002170008000000020217002C0000000354
+:103110000217003C000000040217004800000002F3
+:103120000217004C000000900217005000000090B1
+:103130000217005400800090021700580810000089
+:10314000021700600000008A02170064000000807F
+:1031500002170068000000810217006C0000008068
+:10316000021700700000000602170078000007D068
+:103170000217007C0000076C02170038007C100466
+:10318000021700040000000F061640240000000291
+:10319000021640700000001C0216420800000001E8
+:1031A0000216421000000001021642200000000139
+:1031B0000216422800000001021642300000000101
+:1031C00002164238000000010216426000000002B0
+:1031D0000C16401C0003D0900A16401C0000009CF6
+:1031E0000B16401C000009C4021640300000000805
+:1031F000021640340000000C021640380000001097
+:1032000002164044000000200216400000000001A9
+:10321000021640D80000000102164008000000011C
+:103220000216400C000000010216401000000001D0
+:103230000216424000000000021642480000000052
+:103240000616427000000002021642500000000004
+:1032500002164258000000000616428000000002DC
+:1032600002166008000012240216600C0000121002
+:1032700002166010000012140216601C0000FFFF0E
+:10328000021660200000FFFF021660240000FFFF0E
+:10329000021660280000FFFF0216603800000020C0
+:1032A0000216603C0000002006166040000000028C
+:1032B00002166048000000230216604C0000002443
+:1032C000021660500000002502166054000000261F
+:1032D00002166058000000270216605C00000029FA
+:1032E000021660600000002A021660640000002BD5
+:1032F000021660680000002C0216606C0000002DB1
+:1033000002166070000000EC0216607400000011EC
+:1033100002166078000000120616607C0000000FA4
+:10332000021660B800000001021660BC0000000137
+:10333000061660C00000000C021660F000000001DC
+:10334000061660F400000031021661B800000001AA
+:10335000061661BC0000000D021661F000000001BD
+:10336000061661F4000000110216623807FFFFFF25
+:103370000216623C0000003F0216624007FFFFFF9A
+:10338000021662440000000F0116624800000000AF
+:103390000116624C0000000001166250000000009F
+:1033A000011662540000000001166258000000007F
+:1033B0000116625C0000000001166260000000005F
+:1033C000011662640000000001166268000000003F
+:1033D0000116626C0000000001166270000000001F
+:1033E00001166274000000000116627800000000FF
+:1033F0000116627C000000000C166000000003E86B
+:103400000A166000000000010B1660000000000AB0
+:1034100002168040000000060216804400000005ED
+:10342000021680480000000A0216804C00000005C9
+:103430000216805400000002021680CC0000000436
+:10344000021680D000000004021680D400000004A0
+:10345000021680D800000004021680DC0000000480
+:10346000021680E000000004021680E40000000460
+:10347000021680E800000004021688040000000420
+:10348000021680300000007C021680340000003DEF
+:10349000021680380000003F0216803C0000009CAD
+:1034A000021680F000000007061680F400000005F8
+:1034B0000216880C010101010216810800000000BB
+:1034C0000216810C000000040216811000000004A6
+:1034D0000216811400000002021688100801200460
+:1034E00002168118000000050216811C000000056C
+:1034F000021681200000000502168124000000054C
+:103500000216882C200810010216812800000008ED
+:103510000216812C00000006021681300000000710
+:1035200002168134000000000216883001010120DB
+:1035300006168138000000040216883401010101DA
+:1035400002168148000000000216814C00000004B1
+:10355000021681500000000402168154000000028F
+:103560000216883808012004021681580000000560
+:103570000216815C00000005021681600000000553
+:1035800002168164000000050216883C2008100124
+:1035900002168168000000080216816C0000000617
+:1035A00002168170000000070216817400000001FD
+:1035B00002168840010101200216817800000001F6
+:1035C0000216817C000000010216818000000001CB
+:1035D00002168184000000010216884401010101E5
+:1035E00002168188000000010216818C0000000490
+:1035F000021681900000000402168194000000026F
+:10360000021688480801200402168198000000056F
+:103610000216819C00000005021681A00000000532
+:10362000021681A40000000502168814200810016B
+:10363000021681A800000008021681AC00000006F6
+:10364000021681B000000007021681B400000001DC
+:103650000216881801010120021681B8000000013D
+:10366000021681BC00000001021681C000000001AA
+:10367000021681C4000000010216881C010101012C
+:10368000021681C800000001021681CC000000046F
+:10369000021681D000000004021681D4000000024E
+:1036A0000216882008012004021681D800000005B7
+:1036B000021681DC00000005021681E00000000512
+:1036C000021681E40000000502168824200810017B
+:1036D000021681E800000008021681EC00000006D6
+:1036E000021681F0000000070216E40C0000000042
+:1036F00002168828010101200616E41000000004CB
+:103700000216E000010101010216E42000000000A1
+:103710000216E424000000040216E428000000045D
+:103720000216E42C000000020216E0040801200446
+:103730000216E430000000050216E4340000000523
+:103740000216E438000000050216E43C0000000503
+:103750000216E008200810010216E44000000008EC
+:103760000216E444000000060216E44800000007C8
+:103770000216E44C000000000216E00C01010120DA
+:103780000616E450000000040216E01001010101D9
+:103790000216E460000000000216E4640000000469
+:1037A0000216E468000000040216E46C0000000247
+:1037B0000216E014080120040216E470000000055F
+:1037C0000216E474000000050216E478000000050B
+:1037D0000216E47C000000050216E0182008100123
+:1037E0000216E480000000080216E48400000006CF
+:1037F0000216E488000000070216E48C00000001B5
+:103800000216E01C010101200216E49000000001F4
+:103810000216E494000000010216E4980000000182
+:103820000216E49C000000010216E02001010101E3
+:103830000216E4A0000000010216E4A40000000447
+:103840000216E4A8000000040216E4AC0000000226
+:103850000216E024080120040216E4B0000000056E
+:103860000216E4B4000000050216E4B800000005EA
+:103870000216E4BC000000050216E0282008100132
+:103880000216E4C0000000080216E4C400000006AE
+:103890000216E4C8000000070216E4CC0000000194
+:1038A0000216E02C010101200216E4D00000000104
+:1038B0000216E4D4000000010216E4D80000000162
+:1038C0000216E4DC000000010216E03001010101F3
+:1038D0000216E4E0000000010216E4E40000000427
+:1038E0000216E4E8000000040216E4EC0000000206
+:1038F0000216E034080120040216E4F0000000057E
+:103900000216E4F4000000050216E4F800000005C9
+:103910000216E4FC000000050216E0382008100141
+:103920000216E500000000080216E504000000068B
+:103930000216E508000000070216E03C0101012024
+:1039400002168240003F003F021682440000000041
+:103950000216E524003F003F0216E52800000000A3
+:1039600002168248000000000216824C003F003F11
+:103970000216E52C000000000216E530003F003F73
+:10398000021682500100010002168254010001005B
+:103990000216E534010001000216E53801000100BD
+:1039A00006168258000000020216E53C00000000E6
+:1039B0000216E540000000000216826000C000C050
+:1039C0000216826400C000C00216E54400C000C0B8
+:1039D0000216E54800C000C0021682681E001E00E4
+:1039E0000216826C1E001E000216E54C1E001E0010
+:1039F0000216E5501E001E000216827040004000B4
+:103A000002168274400040000216E5544000400057
+:103A10000216E558400040000216827880008000BF
+:103A20000216827C800080000216E55C8000800027
+:103A30000216E560800080000216828020002000CF
+:103A400002168284200020000216E5642000200077
+:103A50000216E56820002000061682880000000299
+:103A60000216E56C000000000216E5700000000080
+:103A700002168290000000000216829400000000EE
+:103A80000216E574000000000216E5780000000050
+:103A900002168298000000000216829C00000000BE
+:103AA0000216E57C000000000216E5800000000020
+:103AB000021682A000000000021682A4000000018D
+:103AC000061682A80000000A021681F400000C0805
+:103AD000021681F800000040021681FC000001007F
+:103AE0000216820000000020021682040000001767
+:103AF00002168208000000800216820C00000200FC
+:103B000002168210000000000216821801FF01FF59
+:103B10000216821401FF01FF0216E51001FF01FFEA
+:103B20000216E50C01FF01FF0216823C00000013A3
+:103B3000021680900000013F0216806000000140E4
+:103B40000216806400000140061680680000000232
+:103B500002168070000000C0061680740000000786
+:103B60000216809C00000048021680A00000004859
+:103B7000061680A400000002021680AC0000004877
+:103B8000061680B000000007021682380000800090
+:103B900002168234000025E40216809400007FFFA4
+:103BA00002168220000F000F0216821C000F000F69
+:103BB0000216E518000F000F0216E514000F000FA3
+:103BC000021682280000000002168224FFFFFFFF79
+:103BD0000216E520000000000216E51CFFFFFFFFB3
+:103BE0000216E6BC000000000216E6C0000000025B
+:103BF0000216E6C4000000010216E6C80000000339
+:103C00000216E6CC000000040216E6D00000000612
+:103C10000216E6D4000000050216E6D800000007F0
+:103C2000021680EC000000FF0214000000000001FA
+:103C30000214000C0000000102140040000000010A
+:103C40000214004400007FFF0214000C000000007A
+:103C500002140000000000000214006C00000000CC
+:103C600002140004000000010214003000000001F2
+:103C700002140004000000000214005C00000000B8
+:103C800002140008000000010214003400000001CA
+:103C90000214000800000000021400600000000090
+:103CA00006028000000020000202005800000032DE
+:103CB000020200A003150020020200A40315002048
+:103CC000020200A801000030020200AC081000004F
+:103CD000020200B000000033020200B40000003015
+:103CE000020200B800000031020200BC0000000324
+:103CF000020200C000000006020200C4000000032F
+:103D0000020200C800000003020200CC0000000212
+:103D1000020200D000000000020200D400000002F5
+:103D2000020200DC00000000020200E000000006C9
+:103D3000020200E400000004020200E800000002A9
+:103D4000020200EC00000002020200F0000000018C
+:103D5000020200FC00000006020201200000000038
+:103D60000202013400000002020201B00000000162
+:103D70000202020C00000001020202140000000115
+:103D80000202021800000002020204040000000106
+:103D90000202040C00000040020204100000004077
+:103DA0000202041C000000040202042000000020A3
+:103DB0000202042400000002020204280000002085
+:103DC000060205000000001204020480002004AA7C
+:103DD000020200600000000F020200640000000701
+:103DE00002020068000000000202006C0000000EE9
+:103DF000020200700000000E0602007400000003C2
+:103E0000020200F4000000040202000400000001AD
+:103E100002020008000000010202000C0000000184
+:103E20000202001000000001020200140000000164
+:103E300002020018000000010202001C0000000144
+:103E40000202002000000001020200240000000124
+:103E500002020028000000010202002C0000000104
+:103E600002020030000000010202003400000001E4
+:103E700002020038000000010202003C00000001C4
+:103E800002020040000000010202004400000001A4
+:103E900002020048000000010202004C0000000184
+:103EA000020200500000000102020108000000C8E8
+:103EB0000202011800000002020201C4000000001A
+:103EC000020201CC00000000020201D40000000246
+:103ED000020201DC00000002020201E4000000FF17
+:103EE000020201EC000000FF0202010000000000DD
+:103EF0000202010C000000C80202011C00000002C6
+:103F0000020201C800000000020201D0000000000F
+:103F1000020201D800000002020201E000000002DB
+:103F2000020201E8000000FF020201F0000000FFB1
+:103F3000020201040000000002020108000000C8A3
+:103F40000202011800000002020201C40000000089
+:103F5000020201CC00000000020201D400000002B5
+:103F6000020201DC00000002020201E4000000FF86
+:103F7000020201EC000000FF02020100000000004C
+:103F80000202010C000000C80202011C0000000235
+:103F9000020201C800000000020201D0000000007F
+:103FA000020201D800000002020201E0000000024B
+:103FB000020201E8000000FF020201F0000000FF21
+:103FC000020201040000000002020108000000C813
+:103FD0000202011800000002020201C400000000F9
+:103FE000020201CC00000000020201D40000000225
+:103FF000020201DC00000002020201E4000000FFF6
+:10400000020201EC000000FF0202010000000000BB
+:104010000202010C000000C80202011C00000002A4
+:10402000020201C800000000020201D000000000EE
+:10403000020201D800000002020201E000000002BA
+:10404000020201E8000000FF020201F0000000FF90
+:10405000020201040000000002020108000000C882
+:104060000202011800000002020201C40000000068
+:10407000020201CC00000000020201D40000000294
+:10408000020201DC00000002020201E4000000FF65
+:10409000020201EC000000FF02020100000000002B
+:1040A0000202010C000000C80202011C0000000214
+:1040B000020201C800000000020201D0000000005E
+:1040C000020201D800000002020201E0000000022A
+:1040D000020201E8000000FF020201F0000000FF00
+:1040E00002020104000000000728040000A30000F1
+:1040F000082807B8000904CA072C000034F10000A2
+:10410000072C800038A60D3D072D000037B61B6731
+:10411000072D800032632955072E00001C6835EEFC
+:10412000082E48B036EA04CC012800000000000048
+:104130000128000400000000012800080000000021
+:104140000128000C00000000012800100000000001
+:1041500001280014000000000228002000000001D7
+:1041600002280024000000020228002800000003AA
+:104170000228002C0000000002280030000000048B
+:10418000022800340000000102280038000000006E
+:104190000228003C0000000102280040000000044A
+:1041A000022800440000000002280048000000012E
+:1041B0000228004C0000000302280050000000000C
+:1041C00002280054000000010228005800000004EA
+:1041D0000228005C000000000228006000000001CE
+:1041E00002280064000000030228006800000000AC
+:1041F0000228006C0000000102280070000000048A
+:10420000022800740000000002280078000000046A
+:104210000228007C00000003062800800000000245
+:10422000022800A400003FFF022800A8000003FFAE
+:1042300002280224000000000228023400000000CE
+:104240000228024C00000000022802E40000FFFFE8
+:104250000628200000000800022B8BC0000000018F
+:10426000022B800000000000022B8040000000189C
+:10427000022B80800000000C022B80C00000006632
+:104280000C2B83000007A1200A2B830000000138BB
+:104290000B2B8300000013880A2B834000000000D2
+:1042A0000C2B8340000001F40B2B83400000000521
+:1042B000022B83800007A120022B83C0000001F4A1
+:1042C000022B1480000000010A2B14800000000063
+:1042D000062A9AF800000004042A9B08000204CE73
+:1042E000062A9B1000000006062A90800000004865
+:1042F000062A2008000000C8062A2000000000024C
+:10430000062A91A800000086062A900000000020DE
+:10431000062A93C800000003042A93D4000104D0A5
+:10432000062A9DA800000002042A9498000404D1E3
+:10433000042A9D58000104D5062A9D5C0000001146
+:10434000042ACB20001004D6042A3000000204E620
+:10435000062A300800000100062A40400000001034
+:10436000042A4000001004E8042A8408000204F82B
+:10437000062A9DA000000002062AB000000000509E
+:10438000062ABB7000000070062AB150000000022F
+:10439000062ABB6000000004062AD00000000800C6
+:1043A000062AC00000000150062A94A8000000322E
+:1043B000062A502000000002062A503000000002A9
+:1043C000062A500000000002062A501000000002D9
+:1043D000022A520800000001042A9B28000204FA65
+:1043E000062A963800000022042A96C0000104FC28
+:1043F000062A96C400000003062A976800000022DF
+:10440000042A97F0000104FD062A97F40000000337
+:10441000062A989800000022042A9920000104FE30
+:10442000062A992400000003062A99C800000022E9
+:10443000042A9A50000104FF062A9A54000000033F
+:10444000062AB14000000002062AC54000000150C3
+:10445000062A957000000032062A5028000000024B
+:10446000062A503800000002062A50080000000208
+:10447000062A501800000002022A520C0000000117
+:10448000042A9B3000020500062A96D00000002274
+:10449000042A975800010502062A975C00000003D1
+:1044A000062A980000000022042A988800010503CB
+:1044B000062A988C00000003062A9930000000228A
+:1044C000042A99B800010504062A99BC00000003DB
+:1044D000062A9A6000000022042A9AE800010505D5
+:1044E000062A9AEC00000003062AB14800000002E8
+:1044F000022ACA8000000000042A9B38001005062A
+:10450000062A50480000000E022ACA84000000005B
+:10451000042A9B7800100516062A50800000000E21
+:10452000022ACA8800000000042A9BB80010052651
+:10453000062A50B80000000E022ACA8C00000000B3
+:10454000042A9BF800100536062A50F00000000EE1
+:10455000022ACA9000000000042A9C380010054678
+:10456000062A51280000000E022ACA94000000000A
+:10457000042A9C7800100556062A51600000000E9F
+:10458000022ACA9800000000042A9CB800100566A0
+:10459000062A51980000000E022ACA9C0000000062
+:1045A000042A9CF800100576062A51D00000000E5F
+:1045B000021010080000000102101050000000015D
+:1045C000021010000003D000021010040000003D93
+:1045D0000910180002000586091011000010078656
+:1045E0000610114000000008091011600010079625
+:1045F000061011A00000001806102400000000E0C2
+:104600000210201C00000000021020200000000109
+:10461000021020C00000000202102004000000016F
+:10462000021020080000000109103C00000507A648
+:1046300009103800000507AB09103820000507B045
+:1046400006104C000000010002104028000000107D
+:104650000210404400003FFF0210405800280000B4
+:10466000021040840084924A02104058000000006A
+:104670000210800000001080021080AC00000000DA
+:1046800002108038000000100210810000000000BD
+:10469000061081200000000202108008000002B510
+:1046A0000210801000000000061082000000004A86
+:1046B000021081080001FFFF061081400000000287
+:1046C0000210800000001A800610900000000024F4
+:1046D000061091200000004A061093700000004A66
+:1046E000061095C00000004A0210800400001080EF
+:1046F000021080B0000000010210803C0000001099
+:104700000210810400000000061081280000000251
+:104710000210800C000002B502108014000000009E
+:10472000061084000000004A0210810C0001FFFF07
+:1047300006108148000000020210800400001A8068
+:104740000610909000000024061092480000004AD5
+:10475000061094980000004A061096E80000004AEF
+:104760000210800000001080021080AC00000002E7
+:1047700002108038000000100210810000000000CC
+:10478000061081200000000202108008000002B51F
+:104790000210801000000000061082000000004A95
+:1047A000021081080001FFFF061081400000000296
+:1047B0000210800000001A80061090000000002403
+:1047C000061091200000004A061093700000004A75
+:1047D000061095C00000004A0210800400001080FE
+:1047E000021080B0000000030210803C00000010A6
+:1047F0000210810400000000061081280000000261
+:104800000210800C000002B50210801400000000AD
+:10481000061084000000004A0210810C0001FFFF16
+:1048200006108148000000020210800400001A8077
+:104830000610909000000024061092480000004AE4
+:10484000061094980000004A061096E80000004AFE
+:104850000210800000001080021080AC00000004F4
+:1048600002108038000000100210810000000000DB
+:10487000061081200000000202108008000002B52E
+:104880000210801000000000061082000000004AA4
+:10489000021081080001FFFF0610814000000002A5
+:1048A0000210800000001A80061090000000002412
+:1048B000061091200000004A061093700000004A84
+:1048C000061095C00000004A02108004000010800D
+:1048D000021080B0000000050210803C00000010B3
+:1048E0000210810400000000061081280000000270
+:1048F0000210800C000002B50210801400000000BD
+:10490000061084000000004A0210810C0001FFFF25
+:1049100006108148000000020210800400001A8086
+:104920000610909000000024061092480000004AF3
+:10493000061094980000004A061096E80000004A0D
+:104940000210800000001080021080AC0000000601
+:1049500002108038000000100210810000000000EA
+:10496000061081200000000202108008000002B53D
+:104970000210801000000000061082000000004AB3
+:10498000021081080001FFFF0610814000000002B4
+:104990000210800000001A80061090000000002421
+:1049A000061091200000004A061093700000004A93
+:1049B000061095C00000004A02108004000010801C
+:1049C000021080B0000000070210803C00000010C0
+:1049D000021081040000000006108128000000027F
+:1049E0000210800C000002B50210801400000000CC
+:1049F000061084000000004A0210810C0001FFFF35
+:104A000006108148000000020210800400001A8095
+:104A10000610909000000024061092480000004A02
+:104A2000061094980000004A061096E80000004A1C
+:104A3000021205B0000000010212049000E383405E
+:104A40000212051400003C100212066C0000000166
+:104A5000021206700000000002120494FFFFFFFF24
+:104A600002120498FFFFFFFF0212049CFFFFFFFFEA
+:104A7000021204A0FFFFFFFF021204A4FFFFFFFFCA
+:104A8000021204A8FFFFFFFF021204ACFFFFFFFFAA
+:104A9000021204B0FFFFFFFF021204BCFFFFFFFF82
+:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
+:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
+:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
+:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
+:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
+:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
+:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
+:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
+:104B200002120504FFFFFFFF02120508FFFFFFFF4F
+:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
+:104B4000021204D4FF809000021204B4F00050005E
+:104B5000021204B8F00010000212039000000008D6
+:104B60000212039C00000008021203A000000008CB
+:104B7000021203A400000002021203BC00000004A1
+:104B8000021203C000000005021203C4000000046A
+:104B9000021203D0000000000212036C00000001AA
+:104BA000021203680000003F021201BC0000004036
+:104BB000021201C000001808021201C4000008031C
+:104BC000021201C800000803021201CC00000040DC
+:104BD000021201D000000003021201D400000803F9
+:104BE000021201D800000803021201DC00000803D1
+:104BF000021201E000010003021201E400000803B8
+:104C0000021201E800000803021201EC0000000398
+:104C1000021201F000000003021201F40000000380
+:104C2000021201F800000003021201FC0000000360
+:104C3000021202000000000302120204000000033E
+:104C400002120208000000030212020C000000031E
+:104C500002120210000000030212021400000003FE
+:104C600002120218000000030212021C00000003DE
+:104C700002120220000000030212022400000003BE
+:104C800002120228000024030212022C0000002F4E
+:104C90000212023000000009021202340000001962
+:104CA00002120238000001840212023C000001835B
+:104CB0000212024000000306021202440000001922
+:104CC00002120248000000060212024C0000030615
+:104CD00002120250000003060212025400000306F2
+:104CE0000212025800000C860212025C0000030649
+:104CF00002120260000003060212026400000006B5
+:104D000002120268000000060212026C0000000697
+:104D10000212027000000006021202740000000677
+:104D200002120278000000060212027C0000000657
+:104D30000212028000000006021202840000000637
+:104D400002120288000000060212028C0000000617
+:104D500002120290000000060212029400000006F7
+:104D600002120298000000060212029C00000006D7
+:104D7000021202A000000306021202A400000013A7
+:104D8000021202A800000006021202B00000100485
+:104D9000021202B400001004021203240010644046
+:104DA0000212032800106440021205B40000000142
+:104DB000021201B0000000010600A0000000000C7B
+:104DC0000200A050000000000200A05400000000FB
+:104DD0000200A0EC555400000200A0F055555555B6
+:104DE0000200A0F4000055550200A0F8F0000000F9
+:104DF0000200A0FC555400000200A1005555555575
+:104E00000200A104000055550200A108F0000000B6
+:104E10000200A18C555400000200A1905555555533
+:104E20000200A194000055550200A198F000000076
+:104E30000200A19C000000000200A1A000010000EF
+:104E40000200A1A4000050140200A1A8000000006C
+:104E50000200A45C00000C000200A61C000000037D
+:104E60000200A06CFF5C00000200A070FFF55FFF75
+:104E70000200A0740000FFFF0200A078F00003E031
+:104E80000200A07C000000000200A0800000A00042
+:104E90000600A084000000050200A0980FE00000BA
+:104EA0000600A09C000000070200A0B8000004005B
+:104EB0000600A0BC000000030200A0C80000100013
+:104EC0000600A0CC000000030200A0D800004000B3
+:104ED0000600A0DC000000030200A0E800010000C2
+:104EE0000600A22C000000040200A10CFF5C0000E0
+:104EF0000200A110FFF55FFF0200A1140000FFFFF8
+:104F00000200A118F00003E00200A11C0000000054
+:104F10000200A1200000A0000600A124000000055E
+:104F20000200A1380FE000000600A13C00000007CD
+:104F30000200A158000008000600A15C0000000368
+:104F40000200A168000020000600A16C0000000320
+:104F50000200A178000080000600A17C0000000390
+:104F60000200A188000200000600A23C000000042C
+:104F70000200A030000000000200A0340000000089
+:104F80000200A038000000000200A03C0000000069
+:104F90000200A040000000000200A0440000000049
+:104FA0000200A048000000000200A04C0000000029
+:104FB00000000000000000000000003000000000C1
+:104FC00000000000000000000000000000000000E1
+:104FD00000000000000000000000000000000000D1
+:104FE0000000000000300031000000000000000060
+:104FF00000000000000000000000000000000000B1
+:1050000000000000000000000000000000000000A0
+:10501000003100520000000000000000000000000D
+:105020000000000000000000000000000000000080
+:105030000000000000000000000000000052008995
+:1050400000000000000000000089008D008D00912C
+:1050500000910095009500990099009D009D00A188
+:1050600000A100A500A500A900A900AE00AE00B1F6
+:1050700000B100B4000000000000000000000000CB
+:105080000000000000000000000000000000000020
+:105090000000000000B40309030903130313031DF8
+:1050A000031D03240324032B032B03320332033990
+:1050B00003390340034003470347034E034E0355A0
+:1050C00000000000000000000000000000000000E0
+:1050D00000000000000000000000000000000000D0
+:1050E00000000000000000000000000000000000C0
+:1050F00000000000000000000000000000000000B0
+:10510000000000000000000000000000000000009F
+:10511000000000000000000000000000000000008F
+:10512000000000000000000000000000000000007F
+:10513000000000000000000000000000000000006F
+:10514000000000000000000000000000000000005F
+:10515000000000000000000000000000000000004F
+:10516000000000000000000000000000000000003F
+:105170000355035B0000000000000000035B035CBC
+:10518000035C035D035D035E035E035F035F036017
+:1051900003600361036103620362036300000000B4
+:1051A00000000000000000000000000000000000FF
+:1051B00000000000000000000000000000000000EF
+:1051C00000000000000000000363036D036D037B1B
+:1051D000037B0389000000000000000000000000C5
+:1051E00000000000000000000000000000000000BF
+:1051F00000000000000000000000000000000000AF
+:10520000000000000000000000000000000000009E
+:10521000000000000000000000000000000000008E
+:105220000389038A00000000000000000000000065
+:10523000000000000000000000000000000000006E
+:10524000000000000000000000000000038A03D6F8
+:10525000000000000000000000000000000000004E
+:10526000000000000000000000000000000000003E
+:10527000000000000000000003D604010000000050
+:10528000000000000000000000000000000000001E
+:10529000000000000000000000000000000000000E
+:1052A00000000000040104330000000000000000C2
+:1052B0000433043A043A0441044104480448044FC6
+:1052C000044F04560456045D045D04640464046BD6
+:1052D000046B04A4000000000000000004A404A863
+:1052E00004A804AC04AC04B004B004B404B404B81E
+:1052F00004B804BC04BC04C004C004C404C4051342
+:105300000513052A052A05410541054305430545C1
+:1053100005450547054705490549054B054B054D1D
+:10532000054D054F054F0551055105E805E805E90F
+:1053300005E905EA05EA05EF05EF05F405F405F9C9
+:1053400005F905FE05FE0603060306080608060D18
+:10535000060D0612061206130000000000000000F1
+:10536000000000000000000000000000000000003D
+:10537000000000000000000000000000000000002D
+:1053800006130624000000000000000000000000DA
+:10539000000000000000000000000000000000000D
+:1053A0000000000000000000000000000624063994
+:1053B0000639063C063C063F0000000000000000E5
+:1053C00000000000000000000000000000000000DD
+:1053D0000000000000000000063F0675000000000D
+:1053E00000000000000000000000000000000000BD
+:1053F00000000000000000000000000000000000AD
+:1054000000000000067507780000000000000000A2
+:10541000000000000000000000000000000000008C
+:10542000000000000000000000000000000000007C
+:105430000778077F077F078307830787000000003F
+:10544000000000000000000000000000000000005C
+:10545000000000000000000000000000078707C8EF
+:10546000000000000000000007C807D107D107DADC
+:1054700007DA07E307E307EC07EC07F507F507FE94
+:1054800007FE080708070810081008670867087C67
+:10549000087C089108910894089408970897089A3E
+:1054A000089A089D089D08A008A008A308A308A6BC
+:1054B00008A608A908A908B2000000000000000022
+:1054C00000000000000000000000000000000000DC
+:1054D00000000000000000000000000000000000CC
+:1054E00008B208B800000000000000000000000042
+:1054F00000000000000000000000000000000000AC
+:1055000000000000000000000000000008B808BB18
+:10551000000000000000000000000000000000008B
+:10552000000000000000000000000000000000007B
+:10553000000000000000000008BB08C100000000DF
+:10554000000000000000000000000000000000005B
+:10555000000000000000000000000000000000004B
+:10556000000000000000000000000000000000003B
+:1055700008C108D008D008DF08DF08EE08EE08FDF3
+:1055800008FD090C090C091B091B092A092A0939FC
+:10559000093909AA00000000000000000000000016
+:1055A00000000000000000000000000000000000FB
+:1055B00000000000000000000000000009AA09BF70
+:1055C00009BF09D009D009E109E109E209E209E3CB
+:1055D00009E309E409E409E509E509E609E609E75B
+:1055E00009E709E809E809E90000000000000000F7
+:1055F00000000000000000000000000000000000AB
+:10560000000000000000000000000000000000009A
+:10561000000000000000000000000000000000008A
+:10562000000000000000000000000000000000007A
+:10563000000000000000000000000000000000006A
+:10564000000000000000000000000000000000005A
+:10565000000000000000000000000000000000004A
+:10566000000000000000000000000000000000003A
+:10567000000000000000000000000000000000002A
+:10568000000000000000000000000000000000001A
+:10569000000000000000000000000000000000000A
+:1056A00000000000000000000000000000000000FA
+:1056B00000000000000000000000000000000000EA
+:1056C000000000000000000000010000000204C013
+:1056D0000003098000040E4000051300000617C0F7
+:1056E00000071C800008214000092600000A2AC08B
+:1056F000000B2F80000C3440000D3900000E3DC01F
+:10570000000F42800010474000114C00001250C0B2
+:105710000013558000145A4000155F00001663C046
+:105720000017688000186D4000197200001A76C0DA
+:10573000001B7B80001C8040001D8500001E89C06E
+:10574000001F8E80000093400000200000004000F9
+:1057500000006000000080000000A0000000C00009
+:105760000000E000000100000001200000014000F6
+:1057700000016000000180000001A0000001C000E5
+:105780000001E000000200000002200000024000D2
+:1057900000026000000280000002A0000002C000C1
+:1057A0000002E000000300000003200000034000AE
+:1057B00000036000000380000003A0000003C0009D
+:1057C0000003E0000004000000042000000440008A
+:1057D00000046000000480000004A0000004C00079
+:1057E0000004E00000050000000520000005400066
+:1057F00000056000000580000005A0000005C00055
+:105800000005E00000060000000620000006400041
+:1058100000066000000680000006A0000006C00030
+:105820000006E0000007000000072000000740001D
+:1058300000076000000780000007A0000007C0000C
+:105840000007E000000800000008200000084000F9
+:1058500000086000000880000008A0000008C000E8
+:105860000008E000000900000009200000094000D5
+:1058700000096000000980000009A0000009C000C4
+:105880000009E000000A0000000A2000000A4000B1
+:10589000000A6000000A8000000AA000000AC000A0
+:1058A000000AE000000B0000000B2000000B40008D
+:1058B000000B6000000B8000000BA000000BC0007C
+:1058C000000BE000000C0000000C2000000C400069
+:1058D000000C6000000C8000000CA000000CC00058
+:1058E000000CE000000D0000000D2000000D400045
+:1058F000000D6000000D8000000DA000000DC00034
+:10590000000DE000000E0000000E2000000E400020
+:10591000000E6000000E8000000EA000000EC0000F
+:10592000000EE000000F0000000F2000000F4000FC
+:10593000000F6000000F8000000FA000000FC000EB
+:10594000000FE000001000000010200000104000D8
+:1059500000106000001080000010A0000010C000C7
+:105960000010E000001100000011200000114000B4
+:1059700000116000001180000011A0000011C000A3
+:105980000011E00000120000001220000012400090
+:1059900000126000001280000012A0000012C0007F
+:1059A0000012E0000013000000132000001340006C
+:1059B00000136000001380000013A0000013C0005B
+:1059C0000013E00000140000001420000014400048
+:1059D00000146000001480000014A0000014C00037
+:1059E0000014E00000150000001520000015400024
+:1059F00000156000001580000015A0000015C00013
+:105A00000015E000001600000016200000164000FF
+:105A100000166000001680000016A0000016C000EE
+:105A20000016E000001700000017200000174000DB
+:105A300000176000001780000017A0000017C000CA
+:105A40000017E000001800000018200000184000B7
+:105A500000186000001880000018A0000018C000A6
+:105A60000018E00000190000001920000019400093
+:105A700000196000001980000019A0000019C00082
+:105A80000019E000001A0000001A2000001A40006F
+:105A9000001A6000001A8000001AA000001AC0005E
+:105AA000001AE000001B0000001B2000001B40004B
+:105AB000001B6000001B8000001BA000001BC0003A
+:105AC000001BE000001C0000001C2000001C400027
+:105AD000001C6000001C8000001CA000001CC00016
+:105AE000001CE000001D0000001D2000001D400003
+:105AF000001D6000001D8000001DA000001DC000F2
+:105B0000001DE000001E0000001E2000001E4000DE
+:105B1000001E6000001E8000001EA000001EC000CD
+:105B2000001EE000001F0000001F2000001F4000BA
+:105B3000001F6000001F8000001FA000001FC000A9
+:105B4000001FE00000200000002020000020400096
+:105B500000206000002080000020A0000020C00085
+:105B60000020E00000210000002120000021400072
+:105B700000216000002180000021A0000021C00061
+:105B80000021E0000022000000222000002240004E
+:105B900000226000002280000022A0000022C0003D
+:105BA0000022E0000023000000232000002340002A
+:105BB00000236000002380000023A0000023C00019
+:105BC0000023E00000240000002420000024400006
+:105BD00000246000002480000024A0000024C000F5
+:105BE0000024E000002500000025200000254000E2
+:105BF00000256000002580000025A0000025C000D1
+:105C00000025E000002600000026200000264000BD
+:105C100000266000002680000026A0000026C000AC
+:105C20000026E00000270000002720000027400099
+:105C300000276000002780000027A0000027C00088
+:105C40000027E00000280000002820000028400075
+:105C500000286000002880000028A0000028C00064
+:105C60000028E00000290000002920000029400051
+:105C700000296000002980000029A0000029C00040
+:105C80000029E000002A0000002A2000002A40002D
+:105C9000002A6000002A8000002AA000002AC0001C
+:105CA000002AE000002B0000002B2000002B400009
+:105CB000002B6000002B8000002BA000002BC000F8
+:105CC000002BE000002C0000002C2000002C4000E5
+:105CD000002C6000002C8000002CA000002CC000D4
+:105CE000002CE000002D0000002D2000002D4000C1
+:105CF000002D6000002D8000002DA000002DC000B0
+:105D0000002DE000002E0000002E2000002E40009C
+:105D1000002E6000002E8000002EA000002EC0008B
+:105D2000002EE000002F0000002F2000002F400078
+:105D3000002F6000002F8000002FA000002FC00067
+:105D4000002FE00000300000003020000030400054
+:105D500000306000003080000030A0000030C00043
+:105D60000030E00000310000003120000031400030
+:105D700000316000003180000031A0000031C0001F
+:105D80000031E0000032000000322000003240000C
+:105D900000326000003280000032A0000032C000FB
+:105DA0000032E000003300000033200000334000E8
+:105DB00000336000003380000033A0000033C000D7
+:105DC0000033E000003400000034200000344000C4
+:105DD00000346000003480000034A0000034C000B3
+:105DE0000034E000003500000035200000354000A0
+:105DF00000356000003580000035A0000035C0008F
+:105E00000035E0000036000000362000003640007B
+:105E100000366000003680000036A0000036C0006A
+:105E20000036E00000370000003720000037400057
+:105E300000376000003780000037A0000037C00046
+:105E40000037E00000380000003820000038400033
+:105E500000386000003880000038A0000038C00022
+:105E60000038E0000039000000392000003940000F
+:105E700000396000003980000039A0000039C000FE
+:105E80000039E000003A0000003A2000003A4000EB
+:105E9000003A6000003A8000003AA000003AC000DA
+:105EA000003AE000003B0000003B2000003B4000C7
+:105EB000003B6000003B8000003BA000003BC000B6
+:105EC000003BE000003C0000003C2000003C4000A3
+:105ED000003C6000003C8000003CA000003CC00092
+:105EE000003CE000003D0000003D2000003D40007F
+:105EF000003D6000003D8000003DA000003DC0006E
+:105F0000003DE000003E0000003E2000003E40005A
+:105F1000003E6000003E8000003EA000003EC00049
+:105F2000003EE000003F0000003F2000003F400036
+:105F3000003F6000003F8000003FA000003FC00025
+:105F4000003FE000003FE00100000000000001FF12
+:105F50000000020000007FF800007FF80000014010
+:105F600000003500000000010000FF0000000000FC
+:105F70000000FF00000000000000FF000000000023
+:105F80000000FF00000000000000FF000000000013
+:105F90000000FF00000000000000FF000000000003
+:105FA0000000FF000000000000000000140AFF00D5
+:105FB00000000001000000000020100100000000AF
+:105FC0000100900000000100000090020000900419
+:105FD00000009006000090080000900A0000900C5D
+:105FE0000000900E0000901000009012000090142D
+:105FF00000009016000090180000901A0000901CFD
+:106000000000901E000090200000902200009024CC
+:1060100000009026000090280000902A0000902C9C
+:106020000000902E0000903000009032000090346C
+:1060300000009036000090380000903A0000903C3C
+:106040000000903E0000904000009042000090440C
+:1060500000009046000090480000904A0000904CDC
+:106060000000904E000090500000905200009054AC
+:1060700000009056000090580000905A0000905C7C
+:106080000000905E0000906000009062000090644C
+:1060900000009066000090680000906A0000906C1C
+:1060A0000000906E000090700000907200009074EC
+:1060B00000009076000090780000907A0000907CBC
+:1060C0000000907E0000908000009082000090848C
+:1060D00000009086000090880000908A0000908C5C
+:1060E0000000908E0000909000009092000090942C
+:1060F00000009096000090980000909A0000909CFC
+:106100000000909E000090A0000090A2000090A4CB
+:10611000000090A6000090A8000090AA000090AC9B
+:10612000000090AE000090B0000090B2000090B46B
+:10613000000090B6000090B8000090BA000090BC3B
+:10614000000090BE000090C0000090C2000090C40B
+:10615000000090C6000090C8000090CA000090CCDB
+:10616000000090CE000090D0000090D2000090D4AB
+:10617000000090D6000090D8000090DA000090DC7B
+:10618000000090DE000090E0000090E2000090E44B
+:10619000000090E6000090E8000090EA000090EC1B
+:1061A000000090EE000090F0000090F2000090F4EB
+:1061B000000090F6000090F8000090FA000090FCBB
+:1061C000000090FE00009100000091020000910488
+:1061D00000009106000091080000910A0000910C57
+:1061E0000000910E00009110000091120000911427
+:1061F00000009116000091180000911A0000911CF7
+:106200000000911E000091200000912200009124C6
+:1062100000009126000091280000912A0000912C96
+:106220000000912E00009130000091320000913466
+:1062300000009136000091380000913A0000913C36
+:106240000000913E00009140000091420000914406
+:1062500000009146000091480000914A0000914CD6
+:106260000000914E000091500000915200009154A6
+:1062700000009156000091580000915A0000915C76
+:106280000000915E00009160000091620000916446
+:1062900000009166000091680000916A0000916C16
+:1062A0000000916E000091700000917200009174E6
+:1062B00000009176000091780000917A0000917CB6
+:1062C0000000917E00009180000091820000918486
+:1062D00000009186000091880000918A0000918C56
+:1062E0000000918E00009190000091920000919426
+:1062F00000009196000091980000919A0000919CF6
+:106300000000919E000091A0000091A2000091A4C5
+:10631000000091A6000091A8000091AA000091AC95
+:10632000000091AE000091B0000091B2000091B465
+:10633000000091B6000091B8000091BA000091BC35
+:10634000000091BE000091C0000091C2000091C405
+:10635000000091C6000091C8000091CA000091CCD5
+:10636000000091CE000091D0000091D2000091D4A5
+:10637000000091D6000091D8000091DA000091DC75
+:10638000000091DE000091E0000091E2000091E445
+:10639000000091E6000091E8000091EA000091EC15
+:1063A000000091EE000091F0000091F2000091F4E5
+:1063B000000091F6000091F8000091FA000091FCB5
+:1063C000000091FEFFFFFFFFFFFFFFFFFFFFFFFF4A
+:1063D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:1063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:1063F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:10640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:10641000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:10642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:10643000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:10644000FFFFFFFF0000000300BEBC2000000000B3
+:10645000000000050000000300BEBC20000000009A
+:10646000000000050000000300BEBC20000000008A
+:10647000000000050000000300BEBC20000000007A
+:10648000000000050000000300BEBC20000000006A
+:10649000000000050000000300BEBC20000000005A
+:1064A000000000050000000300BEBC20000000004A
+:1064B000000000050000000300BEBC20000000003A
+:1064C0000000000500002000000040C000006180C6
+:1064D000000082400000A3000000C3C00000E48070
+:1064E0000001054000012600000146C00001678050
+:1064F000000188400001A9000001C9C00001EA8034
+:1065000000020B4000022C0000024CC000026D8013
+:1065100000028E400002AF000002CFC00002F080F7
+:10652000000011400000800000010380000187008E
+:1065300000020A8000028E00000311800003950013
+:106540000004188000049C0000051F800005A300C3
+:10655000000626800006AA0000072D800007B10073
+:10656000000834800008B80000093B800009BF0023
+:10657000000A4280000AC600000B4980000BCD00D3
+:10658000000C5080000CD400000D578000005B0010
+:1065900000007FF800007FF8000000D50000150023
+:1065A0000000FF00000000000000FF0000000000ED
+:1065B0000000FF00000000000000FF0000000000DD
+:1065C0000000FF00000000000000FF0000000000CD
+:1065D0000000FF00000000000000FF0000000000BD
+:1065E000000019000000000000000000FFFFFFFF96
+:1065F0000000000003938700000000000393870061
+:1066000000007FF800007FF80000068E00003500D3
+:106610000000FF000FFFFFFF0000FF000FFFFFFF64
+:10662000000000FF0000FF000FFFFFFF0000FF0061
+:106630000FFFFFFF000000FF0000FF000FFFFFFF44
+:106640000000FF000FFFFFFF000000FF0000FF0041
+:106650000FFFFFFF0000FF000FFFFFFF000000FF24
+:106660000000FF000FFFFFFF0000FF000FFFFFFF14
+:10667000000000FF0000FF000FFFFFFF0000FF0011
+:106680000FFFFFFF000000FF0000FF000FFFFFFFF4
+:106690000000FF000FFFFFFF000000FF0000FF00F1
+:1066A0000FFFFFFF0000FF000FFFFFFF000000FFD4
+:1066B0000000FF000FFFFFFF0000FF000FFFFFFFC4
+:1066C000000000FF0000FF000FFFFFFF0000FF00C1
+:1066D0000FFFFFFF000000FF0000FF000FFFFFFFA4
+:1066E0000000FF000FFFFFFF000000FF0000FF00A1
+:1066F0000FFFFFFF0000FF000FFFFFFF000000FF84
+:106700000000FF000FFFFFFF0000FF000FFFFFFF73
+:10671000000000FF0000FF000FFFFFFF0000FF0070
+:106720000FFFFFFF000000FF0000FF000FFFFFFF53
+:106730000000FF000FFFFFFF000000FF0000FF0050
+:106740000FFFFFFF0000FF000FFFFFFF000000FF33
+:106750000000FF000FFFFFFF0000FF000FFFFFFF23
+:10676000000000FF0000FF000FFFFFFF0000FF0020
+:106770000FFFFFFF000000FF0000FF000FFFFFFF03
+:106780000000FF000FFFFFFF000000FF0000FF0000
+:106790000FFFFFFF0000FF000FFFFFFF000000FFE3
+:1067A0000000FF000FFFFFFF0000FF000FFFFFFFD3
+:1067B000000000FF0000FF000FFFFFFF0000FF00D0
+:1067C0000FFFFFFF000000FF0000FF000FFFFFFFB3
+:1067D0000000FF000FFFFFFF000000FF0000FF00B0
+:1067E0000FFFFFFF0000FF000FFFFFFF000000FF93
+:1067F0000000FF000FFFFFFF0000FF000FFFFFFF83
+:10680000000000FF0000FF000FFFFFFF0000FF007F
+:106810000FFFFFFF000000FF0000FF000FFFFFFF62
+:106820000000FF000FFFFFFF000000FF0000FF005F
+:106830000FFFFFFF0000FF000FFFFFFF000000FF42
+:106840000000FF000FFFFFFF0000FF000FFFFFFF32
+:10685000000000FF0000FF000FFFFFFF0000FF002F
+:106860000FFFFFFF000000FF0000FF000FFFFFFF12
+:106870000000FF000FFFFFFF000000FF0000FF000F
+:106880000FFFFFFF0000FF000FFFFFFF000000FFF2
+:10689000000000FF000000FF000000FF000000FFFC
+:1068A000000000FF000000FF000000FF000000FFEC
+:1068B0000000FF00000000000000FF0000000000DA
+:1068C0000000FF00000000000000FF0000000000CA
+:1068D0000000FF00000000000000FF0000000000BA
+:1068E0000000FF00000000000000FF0000000000AA
+:1068F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:10690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:10691000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:10692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:10693000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:10694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:10695000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:106970000000100000002080000031000000418075
+:10698000000052000000628000007300000083805D
+:10699000000094000000A4800000B5000000C58045
+:1069A0000000D6000000E6800000F700000107802C
+:1069B0000001180000012880000139000001498011
+:1069C00000015A0000016A8000017B0000018B80F9
+:1069D00000019C000001AC800001BD000001CD80E1
+:1069E0000001DE000001EE800001FF0000000F80CA
+:1069F00000007FF800007FF800000344000035002D
+:106A000010000000000028AD00010001000902068E
+:106A1000CCCCCCC5FFFFFFFFFFFFFFFF7058103C41
+:106A20000000FF00000000000000FF000000000068
+:106A30000000FF00000000000000FF000000000058
+:106A40000000FF00000000000000FF000000000048
+:106A50000000FF00000000000000FF000000000038
+:106A60000000000000000001CCCC0201CCCCCCCC5A
+:106A7000CCCC0201CCCCCCCCCCCC0201CCCCCCCC80
+:106A8000CCCC0201CCCCCCCCCCCC0201CCCCCCCC70
+:106A9000CCCC0201CCCCCCCCCCCC0201CCCCCCCC60
+:106AA000CCCC0201CCCCCCCC00000000FFFFFFFF1F
+:106AB000000E0000011600D6002625A0002625A005
+:106AC000002625A0002625A000720000012300F367
+:106AD000002625A0002625A0002625A0002625A00A
+:106AE0000000FFFF000000000000FFFF00000000AA
+:106AF0000000FFFF000000000000FFFF000000009A
+:106B00000000FFFF000000000000FFFF0000000089
+:106B10000000FFFF000000000000FFFF0000000079
+:106B20000000FFFF000000000000FFFF0000000069
+:106B30000000FFFF000000000000FFFF0000000059
+:106B40000000FFFF000000000000FFFF0000000049
+:106B50000000FFFF000000000000FFFF0000000039
+:106B60000000FFFF000000000000FFFF0000000029
+:106B70000000FFFF000000000000FFFF0000000019
+:106B80000000FFFF000000000000FFFF0000000009
+:106B90000000FFFF000000000000FFFF00000000F9
+:106BA0000000FFFF000000000000FFFF00000000E9
+:106BB0000000FFFF000000000000FFFF00000000D9
+:106BC0000000FFFF000000000000FFFF00000000C9
+:106BD0000000FFFF000000000000FFFF00000000B9
+:106BE0000000FFFF000000000000FFFF00000000A9
+:106BF0000000FFFF000000000000FFFF0000000099
+:106C00000000FFFF000000000000FFFF0000000088
+:106C10000000FFFF000000000000FFFF0000000078
+:106C20000000FFFF000000000000FFFF0000000068
+:106C30000000FFFF000000000000FFFF0000000058
+:106C40000000FFFF000000000000FFFF0000000048
+:106C50000000FFFF000000000000FFFF0000000038
+:106C60000000FFFF000000000000FFFF0000000028
+:106C70000000FFFF000000000000FFFF0000000018
+:106C80000000FFFF000000000000FFFF0000000008
+:106C90000000FFFF000000000000FFFF00000000F8
+:106CA0000000FFFF000000000000FFFF00000000E8
+:106CB0000000FFFF000000000000FFFF00000000D8
+:106CC0000000FFFF000000000000FFFF00000000C8
+:106CD0000000FFFF000000000000FFFF00000000B8
+:106CE000FFFFFFF3318FFFFF0C30C30CC30C30C329
+:106CF000CF3CF300F3CF3CF30000CF3CCDCDCDCD66
+:106D0000FFFFFFF130EFFFFF0C30C30CC30C30C3AB
+:106D1000CF3CF300F3CF3CF30001CF3CCDCDCDCD44
+:106D2000FFFFFFF6305FFFFF0C30C30CC30C30C316
+:106D3000CF3CF300F3CF3CF30002CF3CCDCDCDCD23
+:106D4000FFFFF4061CBFFFFF0C30C305C30C30C3AC
+:106D5000CF300014F3CF3CF30004CF3CCDCDCDCDEC
+:106D6000FFFFFFF2304FFFFF0C30C30CC30C30C3EA
+:106D7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDD
+:106D8000FFFFFFFA302FFFFF0C30C30CC30C30C3E2
+:106D9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB5
+:106DA000FFFFFFF731EFFFFF0C30C30CC30C30C304
+:106DB000CF3CF300F3CF3CF30020CF3CCDCDCDCD85
+:106DC000FFFFFFF5302FFFFF0C30C30CC30C30C3A7
+:106DD000CF3CF300F3CF3CF30040CF3CCDCDCDCD45
+:106DE000FFFFFFF3318FFFFF0C30C30CC30C30C328
+:106DF000CF3CF300F3CF3CF30000CF3CCDCDCDCD65
+:106E0000FFFFFFF1310FFFFF0C30C30CC30C30C389
+:106E1000CF3CF300F3CF3CF30001CF3CCDCDCDCD43
+:106E2000FFFFFFF6305FFFFF0C30C30CC30C30C315
+:106E3000CF3CF300F3CF3CF30002CF3CCDCDCDCD22
+:106E4000FFFFF4061CBFFFFF0C30C305C30C30C3AB
+:106E5000CF300014F3CF3CF30004CF3CCDCDCDCDEB
+:106E6000FFFFFFF2304FFFFF0C30C30CC30C30C3E9
+:106E7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDC
+:106E8000FFFFFFFA302FFFFF0C30C30CC30C30C3E1
+:106E9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB4
+:106EA000FFFFFFF730EFFFFF0C30C30CC30C30C304
+:106EB000CF3CF300F3CF3CF30020CF3CCDCDCDCD84
+:106EC000FFFFFFF5304FFFFF0C30C30CC30C30C386
+:106ED000CF3CF300F3CF3CF30040CF3CCDCDCDCD44
+:106EE000FFFFFFFF30CFFFFF0C30C30CC30C30C3DC
+:106EF000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD98
+:106F0000FFFFFFFF30CFFFFF0C30C30CC30C30C3BB
+:106F1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD76
+:106F2000FFFFFFFF30CFFFFF0C30C30CC30C30C39B
+:106F3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD55
+:106F4000FFFFFFFF30CFFFFF0C30C30CC30C30C37B
+:106F5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD33
+:106F6000FFFFFFFF30CFFFFF0C30C30CC30C30C35B
+:106F7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0F
+:106F8000FFFFFFFF30CFFFFF0C30C30CC30C30C33B
+:106F9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE7
+:106FA000FFFFFFFF30CFFFFF0C30C30CC30C30C31B
+:106FB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB7
+:106FC000FFFFFFFF30CFFFFF0C30C30CC30C30C3FB
+:106FD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD77
+:106FE000FFFFFFF3320FFFFF0C30C30CC30C30C3A5
+:106FF000CF3CF300F3CF3CF30000CF3CCDCDCDCD63
+:10700000FFFFFFF1310FFFFF0C30C30CC30C30C387
+:10701000CF3CF300F3CF3CF30001CF3CCDCDCDCD41
+:10702000FFFFFFF6305FFFFF0C30C30CC30C30C313
+:10703000CF3CF300F3CF3CF30002CF3CCDCDCDCD20
+:10704000FFFFF4061CBFFFFF0C30C305C30C30C3A9
+:10705000CF300014F3CF3CF30004CF3CCDCDCDCDE9
+:10706000FFFFFFF2304FFFFF0C30C30CC30C30C3E7
+:10707000CF3CF300F3CF3CF30008CF3CCDCDCDCDDA
+:10708000FFFFFF8A042FFFFF0C30C30CC30C30C37B
+:10709000CF3CC000F3CF3CF30010CF3CCDCDCDCDE5
+:1070A000FFFFFF9705CFFFFF0C30C30CC30C30C3AD
+:1070B000CF3CC000F3CF3CF30020CF3CCDCDCDCDB5
+:1070C000FFFFFFF5310FFFFF0C30C30CC30C30C3C3
+:1070D000CF3CF300F3CF3CF30040CF3CCDCDCDCD42
+:1070E000FFFFFFF3320FFFFF0C30C30CC30C30C3A4
+:1070F000CF3CF300F3CF3CF30000CF3CCDCDCDCD62
+:10710000FFFFFFF1302FFFFF0C30C30CC30C30C367
+:10711000CF3CF300F3CF3CF30001CF3CCDCDCDCD40
+:10712000FFFFFFF6305FFFFF0C30C30CC30C30C312
+:10713000CF3CF300F3CF3CF30002CF3CCDCDCDCD1F
+:10714000FFFFFF061CBFFFFF0C30C30CC30C30C396
+:10715000CF3CC014F3CF3CF30004CF3CCDCDCDCD1C
+:10716000FFFFFFF2304FFFFF0C30C30CC30C30C3E6
+:10717000CF3CF300F3CF3CF30008CF3CCDCDCDCDD9
+:10718000FFFFFFFA302FFFFF0C30C30CC30C30C3DE
+:10719000CF3CF300F3CF3CF30010CF3CCDCDCDCDB1
+:1071A000FFFFFFF731CFFFFF0C30C30CC30C30C320
+:1071B000CF3CF300F3CF3CF30020CF3CCDCDCDCD81
+:1071C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F9
+:1071D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD75
+:1071E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D9
+:1071F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD95
+:10720000FFFFFFFF30CFFFFF0C30C30CC30C30C3B8
+:10721000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD73
+:10722000FFFFFFFF30CFFFFF0C30C30CC30C30C398
+:10723000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD52
+:10724000FFFFFFFF30CFFFFF0C30C30CC30C30C378
+:10725000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD30
+:10726000FFFFFFFF30CFFFFF0C30C30CC30C30C358
+:10727000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0C
+:10728000FFFFFFFF30CFFFFF0C30C30CC30C30C338
+:10729000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE4
+:1072A000FFFFFFFF30CFFFFF0C30C30CC30C30C318
+:1072B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB4
+:1072C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F8
+:1072D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD74
+:1072E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D8
+:1072F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD94
+:10730000FFFFFFFF30CFFFFF0C30C30CC30C30C3B7
+:10731000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD72
+:10732000FFFFFFFF30CFFFFF0C30C30CC30C30C397
+:10733000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD51
+:10734000FFFFFFFF30CFFFFF0C30C30CC30C30C377
+:10735000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2F
+:10736000FFFFFFFF30CFFFFF0C30C30CC30C30C357
+:10737000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0B
+:10738000FFFFFFFF30CFFFFF0C30C30CC30C30C337
+:10739000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE3
+:1073A000FFFFFFFF30CFFFFF0C30C30CC30C30C317
+:1073B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB3
+:1073C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F7
+:1073D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD73
+:1073E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D7
+:1073F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD93
+:10740000FFFFFFFF30CFFFFF0C30C30CC30C30C3B6
+:10741000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD71
+:10742000FFFFFFFF30CFFFFF0C30C30CC30C30C396
+:10743000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD50
+:10744000FFFFFFFF30CFFFFF0C30C30CC30C30C376
+:10745000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2E
+:10746000FFFFFFFF30CFFFFF0C30C30CC30C30C356
+:10747000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0A
+:10748000FFFFFFFF30CFFFFF0C30C30CC30C30C336
+:10749000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE2
+:1074A000FFFFFFFF30CFFFFF0C30C30CC30C30C316
+:1074B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB2
+:1074C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F6
+:1074D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD72
+:1074E000000C0000000700C000028130000B815832
+:1074F0000002021000010230000F024000010330C0
+:10750000000C0000000800C000028140000B8168F0
+:10751000000202200001024000070250000202C0E7
+:10752000001000000008010000028180000B81A80B
+:107530000002026000018280000E82980008038031
+:107540000010000000010100000281100009013854
+:10755000000201C8000101E8000E01F8000002D895
+:10756000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC5B
+:1075700000002000CCCCCCCCCCCCCCCCCCCCCCCC5B
+:10758000CCCCCCCC00002000CCCCCCCCCCCCCCCC4B
+:10759000CCCCCCCCCCCCCCCC040020000000000067
+:1075A0001F8B080000000000000BFB51CFC0F00350
+:1075B0008AB7B13130ECE644F0E98159181818F86F
+:1075C00099C8D7BF1168C04E20BE01C4075948D71B
+:1075D0007F551AC15E26C9C0700A8827883330B427
+:1075E0004A21C4ED651818EE01F92BA16272403DE5
+:1075F00073A4C977F3281E3CB8D014951F620CA160
+:107600005F9840E82234F950A8BCB81E842E36C5D5
+:107610006EAE841E71F6A7A9A0F2BD55F0ABCFD512
+:1076200040E5C7A2A90F81F2017EE9B234D8030078
+:1076300000000000000000001F8B08000000000098
+:10764000000BED7D0B7455D5B5E8DA9FB3CFFF6421
+:10765000278470123EEEC400C1063C4280A0A83BC5
+:10766000FC1A7DD41E1025E5A11C446B004922A6FE
+:10767000D78C96D76CC8870450E3E751BD457BA0F3
+:10768000D88B0E5BA3A68ABDB43D887AA9C3DB2242
+:107690005AA52D7A83FA2C58A0B1572ABD4FCB5B3F
+:1076A00073AEB592BD77CEC9C74F47EF788D43769D
+:1076B000D6DEEB3BFF6BCEB95634D94FF22E27E422
+:1076C0001CFCD0A7291142A6F73DC92D5932C92368
+:1076D000E41B3E823F1FF923534816210D3EF6BCA2
+:1076E0003D10D905CF2D8D84A426C2F771491221F2
+:1076F000244848899A0B2D02B1870BE15977617CA8
+:10770000323E67C23387C8848C84F218FDBD20EBFB
+:10771000FB9C42FF399AA880F114F68AA8A43C96F3
+:10772000C2F6DF226446DF3C48DD57F578B86FDEED
+:10773000EEA7A26B24C5EB9E837F94E5598950E6A2
+:10774000FA0D47A5C79FB7D51F4FC2B9382F95A8C7
+:10775000382FDE9E108BD8E7E7EEE7A346F2F8F36A
+:10776000E3FBC32DD3B8026E6D8D3E7CB636EA24A2
+:10777000E5258436333B4BE93344CC5DA5FDDBCDB9
+:107780002312871F9F0F8C63D0FAF47F42E1DE9CA7
+:107790004B9241C0214938E0D61C5AEC33D3F42730
+:1077A0009E2497C2AD84CFB9A8FF7AFD302F0A0777
+:1077B0003FCC2B0D3C97C2BCA6F79F97BFD83DAFDF
+:1077C0006A6287CF70E7159844C821C0876A128221
+:1077D00078B9CDD19FAC9B56779AFE08A70BD5E020
+:1077E000EB1B229E822572DFF8000723E0A02F6F9B
+:1077F00034C7496F6EBA067820BE3A387CE20AE395
+:1078000007AB0F8FF4199A1D93803568F110E02DA6
+:107810009F30F8E557B7DE2A4F2194D53A0F4EA096
+:10782000F0CBEF5EB99040F9E8152780DF9ACBA640
+:1078300056CEA5F5B2CB63AF2CA04D423143027AB0
+:10784000DD0A9D15407F5FB32A68B909FAA365CBAD
+:10785000BACAB4106EA6036E1472864ACB1EF8B56F
+:10786000280DFC482F1EA473DEFEED33C1CF436C00
+:10787000F8437E5EEFA0CB8C78BF91E1CBA2FF01F5
+:10788000BE46101B5FD37EB22B35075EB25CE33C75
+:107890000ABF20BC6FFD9B8C97439EF41994CE3D8C
+:1078A000A5B29EA478CA26B16CB58CE263A14A4009
+:1078B0008EE5E4EA1290C360786926A412F89F4A24
+:1078C00007B2C826E77ECEF9AB60CDEE9DAD749CC5
+:1078D00033B34331A895AFD3B94EEDBF9E3B40BE05
+:1078E000786DE5B2E74802C7EB3C5844E76595C9B7
+:1078F000B18729DD6C2D3DACDBE5E3B15EF9E2A695
+:107900000F62A833B83CA0F0514A65D31FF9ECF4DC
+:10791000A17C4AFA08DFE8C4C770F1757A98F4F1DF
+:1079200059C71378EDCF571B055E7D847EDF52B2B9
+:1079300078407DD51FAF4F92046D172A2566324DD2
+:10794000BBFFB4EB0BF7D326DFDD72541935A36A06
+:10795000E74078CB75AE57F4EB6F508C7747D0A2E9
+:10796000AAA37CD5B81E688FDE63114A776740F6FC
+:107970005078281D17A5A04C8A49EC61D64D4AA223
+:10798000657FD44C6E413A48225EC4FCBC86EC90C4
+:10799000B36AAE530E932A4BB2CFDFDFA0E13C3483
+:1079A000182F17EC02DA2105851A2229A05B41AFB6
+:1079B000A092CE9D0F65A79DD1664C25E9F0A072DF
+:1079C000BC4B92A0D76F0D4DBEB8C75BE29CEF9049
+:1079D000DB8554E33DD1268D9CEE6BA792F7047EA8
+:1079E00028102F13761DC7D3660FD92B5D48E5C12C
+:1079F000986BC152209BE1D32C6A87C0932A9FCDFC
+:107A000063A6EA4057648FA4C23C71488A4742F596
+:107A10001DD40B4A06F623FBEA90FE9490894FF1A1
+:107A20003DF3BCD8F8BD655FA206F0531DD58C2D83
+:107A3000748E6B15D3D80874318DC9A7EAE88479A0
+:107A4000A0EF3C129BD7B7A57C5C879AD39687762C
+:107A50005906FBAE5AA52A7F2A7CDF3661207E229A
+:107A6000494F4FB70D9E6E7BF06689DA835FA2BFE8
+:107A7000CC2433018E7F8A2DCE4A0D80AFF71B0FA9
+:107A8000EAEAF83E7BD0FD7DAD42EAD2C98156C913
+:107A9000C7F8D26769601F8875AF0576A720DD1625
+:107AA000DBC4D69B9B8BF05DBBE717BA6AE3BFB51F
+:107AB00054CD78A7F65F8F80B7E8A7B77DF2A0A373
+:107AC000BDBB5D6F7F425E507B18E85CD041504A81
+:107AD0006C95E87B6F6CB105EA6CED63150CFF19D2
+:107AE000E6DF8BAF4F397FD16E30BAFAD3EEA656B0
+:107AF000D04FEF691D575D4CE9E8F74F28B14DF4C1
+:107B00006BF58E89F3C05E7A8FD3B7C0D389DD4D14
+:107B100079E9E823139E7E21F9711C415FD5F2F2C9
+:107B200001E96130FA7ACA4D5F9D577F21F475C82B
+:107B30004D5F1C1E273BD9FAC9FD23185E38BEDCF9
+:107B4000F8C988974FDBAE3F3DFD5AA27CEDEDBCF6
+:107B50003A3D3DF1F90A7C7DD6F90E4647798669B2
+:107B6000EA74FC51D48E91407F9491588ACE53A7E9
+:107B70000FD45B31A6B7845C12ED4F4BCC4E53C98A
+:107B80006BD85E21294B477BDB6967CC57E84BDA22
+:107B90004F7309497A715F64FA504F95A884E93FA1
+:107BA00033943F03EC08FEA3CC8EC1BAB3C0FE07EA
+:107BB000FD359BEB5F89DA5B747DA132E7BE37E070
+:107BC000B23F14BE5FE8676F0D737FEC97F9FE3824
+:107BD0004842A88FC4FE38037FF6EE8B395C476AB3
+:107BE000C494E9BAB5839EE42609B41B41FD4C8ECA
+:107BF0004A49E62F20256037AF970A62A00FE83E7A
+:107C0000AF278B7E7FEF070AEA878668DD8A1658E2
+:107C1000F6B50D13BBE9B8F7349269C59EBEF1EE17
+:107C2000513B7C00EFF6E2F50EBBF6BB52A250B61C
+:107C3000E91D7F549B563C0D8653DFEEA6F090293C
+:107C40002081FF02A1FBA22F18003FF6BE174EF6BF
+:107C5000B2D2BF9C0B364F011653B02F6DA7B63B67
+:107C6000B9188AA3A50A4A07ED1EFEDDFA4D05ECF8
+:107C700077DBFDACBC63D3AC8D169447F2FA561596
+:107C8000FB9ECFCAB76DFA4105EC0BDAB2E99AA9AF
+:107C9000BE6EF324ABE269F8FB365976D85F4DC669
+:107CA00082F2FF43D7E1F79917BD40E1498112B352
+:107CB0000CD26B97150ABF41C7DD952500FFD7147D
+:107CC00002F4EC3762F19B0CA43FA47B7FAE19DB7E
+:107CD000424B0DF4850CF528DE1E96605FC7EC3133
+:107CE000F0E79C43FAA57C41BFAFCFD6B13ED16D42
+:107CF000F659519F3DD68B2717DEEE557BFC80B79A
+:107D0000EF8DF9F01713693FD642390664F3BD0DC4
+:107D100045D92B6D787CCC37A70AF0489A73D12EC1
+:107D20008992DE1F13CA62DF5C403A2BC0781C4385
+:107D3000251FA1743A2EDE53012830AAF4E7708F74
+:107D40004BE6E9EFA15DA548E7BE34743BCA0D07D9
+:107D5000DAE3A845543E8D90483C9DDC5DA9E6A041
+:107D60003C185149D73B809FE09B549F30FB2CE14E
+:107D700003FF56A67132CDF333C073934CC71D4D2C
+:107D80009208A7C1E09A099EADD127B3515E7FCE7C
+:107D900070CDD4DE0DCF1112E397956A39F2CB5036
+:107DA000FD3B6D7C3FD5027E38FA6CE27E38777BF6
+:107DB000BFDA416269F0EB379CFE210DF625B67201
+:107DC000BD6C307D1072FB89189EDD7A6101D70B86
+:107DD0002D51AA17983C5C087A20C8E1DF02BB7ECF
+:107DE000909F6192B4E8F720F707915226FF7DF447
+:107DF0003FE0B751554E7DA00D511FBC2BC55F9084
+:107E0000910E8904F3BB5FEAB86202D04F3EB3C75C
+:107E1000A337B445133638D4CB4CDF097D962C16E6
+:107E2000FA8C20FCCEE37348920E3FE8C307362C51
+:107E3000CE42BFDD8D41871C8AB62EC6FDAF8D9E1A
+:107E4000D12FDAC1FDA399F0A76BC9443A7958A89C
+:107E5000307918317B52E0F34342CEE32E434ED6C5
+:107E60000CFEC4B10F8B4CED39783E5DEFCE8BE448
+:107E7000D826DA4E9DADA63C14BE6AF98B55127D0C
+:107E8000EE2C64F0B76611A4D390B1E08402FA58E6
+:107E9000ED467F4DA8D2BD2FB69515E8A7E77AD459
+:107EA000DF763FF500FBB8A13E9B28BCDEB6F13F74
+:107EB000855C4AA1EB50371003EC09D5A4223102AE
+:107EC0004F3D0FE8453563217C765754C2F3BCD94A
+:107ED000F14AD9A6075433BE05EA8FF8CA7DEDB042
+:107EE0005EF526595624C6073936789B4AA1633F6A
+:107EF00097ADBBFCA589D62AD4EF8646C617F69F58
+:107F000077BDAC72B9E7A417412703C8BBCF441FA4
+:107F10006FCAC25FEDC4BF834E8AFAF02BDA85FACE
+:107F2000F9AB9CF875973F6FBCFA014F141FE751EE
+:107F30003C017D9E379BD123B547D17E7AC0D76166
+:107F400002BC1F2836644BEA6B175672989FF92CB7
+:107F5000DD6851BBE7FE95DB4D68975F4C6580841B
+:107F6000CFB4FEA37A59C376542E542ACC6E97C050
+:107F70001E9FAF6CAB82F63B295E81DF77027F43A9
+:107F80007C20A1A11CAE97DB2B36D2BE5B8F4AB200
+:107F90000246ACBE14F1EBE7FCFE912751097EC806
+:107FA0002DFF4B26BB0CD04B03FBBD9A38BE4519A9
+:107FB000FC0D609F8CA9D3A702D833B5DB5E275791
+:107FC000A65B57B5C2F07F47DDE10E344F9F77EED9
+:107FD000473CCB4DA048D897542B36FA0E97317FAB
+:107FE0000749D0F5407D4E371F150E4CAF0FBAE64E
+:107FF0003F96C753DCF55E56B8BFCE60F03244FF03
+:108000001B07EE5FC0E76C9BC2E323D40043221E34
+:1080100049ECFA5BB9F15005BCA75CB709F0B55D56
+:1080200026D5CCDF1C473D14E1E3ED2CCFC1F60B88
+:10803000552647C79AFA16C0F7D866192C05F2B824
+:1080400062E0FB51CBEBF67B281EDA0B492C64E097
+:1080500010D8EF8BE335A4CBFC5CA6C7F2EB290963
+:10806000D07AF9A52469D0F6EDFB1FA8D068394273
+:108070003754600AFBCA193E7D252406A690C72204
+:1080800029997D4F424C5229EFB140951E183F036C
+:10809000F75F77E69298D7E8931B82AEEE6CBEC787
+:1080A0000F7AE481E27BAE9800FEC65215FDE4E44F
+:1080B000630A27E14F54205E163761BCF6596CDE27
+:1080C000F40DE253D5D9FAC7DC3F1BF9A43DFC34CB
+:1080D000CEC35A4762E3B15E8C60FC860A54F05707
+:1080E0003655337BD78D8FF524F1B832DD4EAF870F
+:1080F000906EDA3F51F8BEE0C58D60E78F835F690F
+:10810000F9974D7FDC381CBB45C40F85DDB245EDCA
+:1081100044BEB728CF815E12768CBFB813C7FDBFAF
+:108120009CDE87DABFBFC4E96F75DB356E7BA65E68
+:10813000D61DF6AB7B5D1F795257C0FCB6E4537E6B
+:108140004FA3077E03FA9AB6DF115DFCAB89465F49
+:108150003F7D72C8C0EFA23CE6AC86F8197A7D2A52
+:10816000F7608F6632BE1A2BE4D037285F0D107F80
+:10817000147CF511151287804FD40EA42F6296201F
+:108180005F097E51BA3BDACFA7F460D4CBE0B906E1
+:10819000FE2239B45C48E93D65B38784BC504B3B53
+:1081A000E313A5FE74F7A021231ECF94317F7596AB
+:1081B000D56D4293606927C6F5285DFD17D095AA55
+:1081C0002725C0EB98FB17E0BA7EA93056F7AB2CF9
+:1081D0007EEC5EC7CF397C89BE1BED793F1B8EB22A
+:1081E000F87D31363F579CBDFE5703C6D9FD319708
+:1081F0009D334C3F428ECAFD08DCEF3558FBE1C68B
+:10820000D795B323903E7ACB19E4ED4D2AE78BA3A3
+:10821000BB1C70E9070F65476CA0F9F9859FFE53F9
+:10822000C60550870D010E6E385EA23AFD879F3756
+:108230001CDDF1EF97B8DC1F4C1E044D33252BE0FD
+:108240003F23CCBF1322DCBFE3A4F79DCD32DA215C
+:10825000C1B0BC134CC9ACFA6ED4C1627C4AEF55B4
+:10826000AA8DDE47971E4A413BB73ECAA4870693B4
+:10827000B7AB7CE60D2ACAADF4FBF1BE7C03CA2580
+:1082800069F20D32E2B5EEF3C937182ABC7BFD9BCB
+:108290003C7FE0867241C7C6D2DF51B8AC3EE821D0
+:1082A000E897F998AECE16575BCDF78137F07DE4AD
+:1082B0008D241E818FA7885C09FC728A1C8E4CB3AA
+:1082C000C993FB548DF14B9BE76DF0AF8A78F94D64
+:1082D0001DAC2CE673F3FDCEF2D7C9E23CF0EB7D8A
+:1082E000FD3E0FE26BB5CBBFD6AC32FD7133A96B4F
+:1082F00005BCB5784815C8B11B74A28EA0A6EBBA10
+:10830000671E9CB19296BFCBED91F7A95C366C715C
+:10831000D035A1A406F87DA76BDAB59710689F6CDD
+:108320002D807D5A36C17DAB1BCEABDA9CF31B6C26
+:10833000FEEEF952F2C2F9669A87BA474A6B4F3F8E
+:1083400022E40DC757A6BC2A914FF50B20205ADF17
+:108350009A43D8BEF3AD60B209E535CBA71AACFDA0
+:108360002F55463F9FB6FDAB83B45FE7EB5900CC7A
+:10837000D6966BC5C12F24E28235A4CE1C4D7F5505
+:10838000F72DB246135BBDE810EB150F5C2FD3BC85
+:108390004FE83E4BBEB06FFEDF9512C7D434F3BF3B
+:1083A0005D49D440FF5EC083024F15F18D7E608A27
+:1083B000DF5A35D4266541BE5317EE03FD86EAA089
+:1083C000875AF805E45A09936BC112E777B77FF82B
+:1083D0004355C4E153C87F188236C07E08A514F007
+:1083E000DF94AB277BEBD3F16A605D1742298E7275
+:1083F000A35E67F56B8871D7EC32E43F8C3FD4B74E
+:108400009F8F71F5FA9106FA77551233B10F17DD88
+:10841000D59E9548D2A60F6BD51E0DF8AC96DA45C1
+:10842000F6F7EBA38AC34FEB7E7AA8E51C2A817D81
+:1084300092CCFC483A2DDBD6FDA70E89E7AF185940
+:108440004B06F0DFAD8F327FF00DEDE3B398DFD058
+:10845000297F4F3732BFDCBF3DF67D0DFCFCA71EE8
+:108460003D7615C07BEDBF2AC407F91B8F85490AED
+:10847000EDB1A406F6D89A2EC54CA6CDAF6862F130
+:10848000CFC7C388AF354F7A930B69FB354FBF33E6
+:1084900085D0F99DDED4F3E268B09B1F95581E820B
+:1084A000D53DE56AFA7E8D4A56A4F31B4CF630F9A9
+:1084B00073F2D96015F0B7B467FFF5D86FE7528F44
+:1084C000D7B6DF2EF678906F693D66973F2225C7B5
+:1084D0004BE9E6C7F23F4E3E22B1F9EDF524FD30FF
+:1084E000BF3D3BB5049D47ED9E0F509ECC7DFC8764
+:1084F000118043ED5EC5A1076AF72829EF147C1EA1
+:108500008327C48DA41940279C5EBAD661BCA8A657
+:1085100073EB07E0C7A8DDEB946B142EB114C0F524
+:108520000D25B610CA4FFD4BC4A0A07AFFD0C311D1
+:10853000802BED77A59605FAC649DFD0FFD99CFEC2
+:10854000FD11D283F1BADACE76365ED7577E0F7A36
+:10855000A5D6253FDF875FF2FBDB33D7785CF6CC0F
+:108560009EA1C5EBD6FEF0CC43161DF7E4937F78B1
+:10857000C8A2F3BFE5AFFFF9D0B7803F7FE6D74190
+:10858000FED73EFAEB08B1D163AD87F1E3E9B1C4A0
+:10859000A27B5472FA37DE24F84B4EFFF4F7E30C5B
+:1085A000BAEED34FFC25CFA0F5EB7F3A7F14C0A1E4
+:1085B000FEC773470DB4FF067A4D7AEDF34A225E8B
+:1085C0008DBD123382F6F1A70B3F07BA0E8C83796B
+:1085D0009E3AE28D81DBB996BE6B980AF85A87FA0B
+:1085E00018CA1B289C6B1EDBFC01C889FEF0B6462E
+:1085F000CBE8AC4F8D06A77D4DD73B0B106FA40782
+:10860000F5A8BB7EED6B149F1766C6DF19F2B106A5
+:10861000F2AEF6B176365E27C55FA43FFE4EC12F9F
+:10862000B3FAE3EF0E17FECE905BBE970F798D5D28
+:10863000231C7152F1EC8B0FC6B3E203C80B210F60
+:1086400006836FB5C4E6B5CC633EE801BE7A32D886
+:108650008BDF8580DF1F9E1947287D1CF7F45C0F98
+:1086600072B3E7A75E7D177DBFE6A76F209F9DFED3
+:10867000F12B9A81F9992424E5F13C31F67308E451
+:10868000700DDBCB91DADDE19437D287A79AE4A2B3
+:108690004A2382EF8FE1FB24A3FF9AE4FE25521ABE
+:1086A000BCBDE1296276407224C265DDEEDF69CC93
+:1086B000BEECC3A7540EF83CB600DE67C2A758BF95
+:1086C0000EEB9F69C3EB6EC6B7EEFA35943F41EFF0
+:1086D000F5C36F527A039EA7777A55D07BA7C1FE68
+:1086E0000AF5C77B1FFC99FD33DCFDCA2B6EFE1615
+:1086F000F1630E87CCF461713B60E0F50D177E3FAE
+:10870000F7180E3A12703CF9717AF97F8ACB8D1AFC
+:10871000625516D8EC139F87DA27905F46E2D6E8B9
+:10872000C2BEF99E847D04A5BF938F2A18AF69ED60
+:108730003C8072DC2D2F6A48FA7DFB5F3DCC5EAC3D
+:10874000D9BB7F0AC8B593CF3D8BF459F3D8310D0F
+:10875000F62F2FEE794AEB2EEDE307D00F499B7EE3
+:1087600038F9A3FD53983C48BFFF0D6AACFFDA7D92
+:10877000CEFE6B1FFBC0D1FF5AAB5363790C038F46
+:10878000F3BE6A2E85F5BE7FC843409EBEDFA9A416
+:10879000F5BFF670FD28E0D4FACA82DF419CBFEC39
+:1087A00070C0003DDAB5C91C7507D86B873D04E47D
+:1087B0003751CD3F7869B9EB9500C633BA0E5FAB40
+:1087C0001836FFC4332E78CE7CCD9A1BA6FDCDEC97
+:1087D0008E97C116CA2D37CA8FD27DA3DD7FF54A89
+:1087E000E52890FBCD60CF4F84F16251F07F289156
+:1087F00005952C7F50D6FD69F537EBCF138A63BE04
+:10880000A047977B7DB6488F62BFC5FD4DADA1F4F3
+:10881000FEE8059AD817D0716D7290DAAA55E9F082
+:10882000364B637648A6EF976ACCDF93E97BC52089
+:10883000ED7BF99BE3470BCBF174F39EC6FB71FB19
+:108840005733C9030FEFA74C331CEB05782FB2E564
+:10885000C58F26C98D90274A4221773C3AEEB3C78F
+:10886000A3AB0EED87F873EED5FBF201FE11D2AC8F
+:10887000BF87763C899D1BC08E75C79FDD7989991E
+:10888000E2D1BE50CD9114E9DF5FFFF8BB897928B2
+:10889000CD63E6F90A6DF1F766BD5FFC7DBD46C7A5
+:1088A0006DC9808725DA9C7FD280BE649248F77DAF
+:1088B0000BA79BCB49F7532B619E3116BF9FED82CF
+:1088C000D7A51C5E3F3B9F2E9CAA9E0A62A81E0A4B
+:1088D000DFB94BCC661081F397F7ACDD0F7C26E255
+:1088E000F7D644F95C70E8F01B6E5EC42ADFE27BC9
+:1088F000B521E445103D27AD5EE89B87C5F755518E
+:10890000DC2779389F1D78F3661FC82D95242A0B24
+:1089100061BFC4E39A986F4FFBCB4BF98949E7AB32
+:10892000E906DADB79A9D50FDC0471757D0CC62365
+:1089300094B397A0FFD0DDAF128D59980F16322A4D
+:1089400014DB38ADB92C3EA3EAF1B479C3ABB4C49F
+:1089500013B05EE5EC65D8AFEC8B613D121A5ABEE0
+:10896000EC77AE8E207C7D14BE201F1164B02E9E4D
+:108970003775F7D511D433FE839E9DF0DD1F6279E4
+:1089800054B7CB8118E459B9F3A82ADE6A27D05F1F
+:10899000EB3109E328827E5B0BEBCE03393E401EB0
+:1089A000D54B9ACDAF9E298FCA1FBA11F3A8FC9F51
+:1089B000368FCA2A9807F6586B361179559644E7D0
+:1089C000D1CAF3A2FEA3F5A5B9A09F5AFDE2FBCB45
+:1089D000734D7BD95A7F00CB3CEF6AB4B7BD09EA2F
+:1089E000E78E26759DE8CF33C93536391BF1AA08C5
+:1089F000E77FD6CC7735479E7CD4115F3AF0E666A8
+:108A00001FE86FFAAC2C02F851BA02BB3D2FD54ECD
+:108A1000ECFA483C051DB5160F1CBF53CF5E847E93
+:108A20007C51F6E949D34C537FBE8FD91F827E7D9E
+:108A3000B924097AC967241EB809E83937140B32FA
+:108A4000BAC438595B08DD53FDD6D1567C03C6DB6A
+:108A5000CEE804B95ED071FFF95FC6E75F64615C80
+:108A60002244309E96791D65B88E559A19F6DAE043
+:108A7000987B5EFABCD4BBBD6C3D2DF1E52CEFAC10
+:108A8000DA198715791AA27E504A1478411EE6B287
+:108A900038ACEC63FCD6872FAA2A6CFECD26B2DC5C
+:108AA0000212509777E2D146554F62FD127FE27C69
+:108AB000AF233ED7CDE2BAAE78E27CE516C6DF83BF
+:108AC000E04F9CCBD80A71B789109F8BF2F37D06DB
+:108AD0008FD3992CAF28033DB5150F1C87EA688CFE
+:108AE00061FBBB1ACB59BE9244B85F3BD9047402F8
+:108AF0006E0946F73F6802BE092B822F7E88E53B50
+:108B00002556BEC9FBCC5CC8373CF0E61B55AB28EC
+:108B10007DB49A01E4FFC1D6A72767205E873B4E4C
+:108B2000FFF5B271DBCC10EE77075BB79E62E30E08
+:108B3000751C115FEB5B9F0FC769350619A7838D05
+:108B400033F8FC199FDCB17F35E62FF828FFFBE9ED
+:108B50007BDFEC1E9248D37F16E79F036F7A515E4E
+:108B6000B7E5B2FC284F49C8644E4067FF9ED2BCAF
+:108B70003978DEA1EC02CC9FBF637F3BCA190DC6DA
+:108B8000A1553CB1D04AD62E61C239DBC83C82F136
+:108B9000674F49DE2A78DF403AE273400F97CB2CCB
+:108BA0003FB9A4E426E8271BF892CEA3DCC7F69DC4
+:108BB0009E928B6F86FAFBA7BF9E68023895333A68
+:108BC0002007F31D706C358AC4B99D01F9DE53EEA0
+:108BD0008C5B109F33FF93A84B306E4EE54287D7D6
+:108BE000665752BD781FF23329B3C0DEDBFEB56B8A
+:108BF00063767EFE672DFE1D565FE46B093E4F9F38
+:108C000037D79A2BF2E6123EA50CCE29F5E6532F64
+:108C1000CCB7E77FF17CEA90C8A7E6F1CC0EFA5F0B
+:108C2000BAFC39F739C6CF2B9FFA292FDF0F07C9B6
+:108C300058C8A7FE8987C4529017F36B250679316F
+:108C40006EFA70F7E73E07D06B8F64E0E7F7013804
+:108C500036B9979F70E1ED463FC6E7C478CF837C75
+:108C60002A1D9C4F47573BFB195BE73C9F755E8372
+:108C7000335E55681538EA9FDF56E4F83EBEE302DE
+:108C8000C7F789F74F759427252F76D4FFD29E39E1
+:108C90008EF2E4CE2B1DF52FDCBBD851BE28B5CC0F
+:108CA000517FDAC11B1CDFA71F5AE3F83EF3C87AD5
+:108CB000477956F7371DF51BA87902F92C7040004B
+:108CC000F7ABDB46CB76FA6CCFA67A250BF3B8353B
+:108CD0009ED48FF166968BDC9767E06EA7146BA627
+:108CE0004EF9573126CCD331CFF046E423A5386F67
+:108CF0008E81EF672C00BF132963E7B444FCDA537D
+:108D00004C527EC8EF0BB9F0EB8A4B7B946D29C0B7
+:108D1000B376F4CB07A5487FBC7AA2EE7CC6A1C58A
+:108D2000B555E3B3E507E4F9385F8CA57C817EC4D3
+:108D30008F15D8B7907961B40F6CFB1B84A3D8DF73
+:108D40005CE623CD0053C11715CB7B46BF80D5C44D
+:108D5000BEC62B0F272FB9BF5EF1A2DD25E4CC6084
+:108D60007A45494E73E421B89F54FE95F9609F1EE1
+:108D70005986F2A8775FD02B1FE333E1BB478DA163
+:108D80007CEC957F7B0A1C7261A8F6995B4EDF052F
+:108D9000421FCF05A597D711C80BA372E9CEABAF81
+:108DA000C23818A9278EF3807955711FE83D6A975C
+:108DB0007DC567DB3F47CA997DF6F766A78660BD2C
+:108DC00036F927EC5501D7118575718CEB85650255
+:108DD000FBAAA6D9B128F801DBA08A6D9FF65DDF5A
+:108DE000F958BF39A4C9E02F6D3E381FE3035E7FF9
+:108DF000DC0779CE4D9E7825ACAB295BD6D3E53B1D
+:108E00006DF631FF8CD6109CB67B00FAD034BAEFE9
+:108E10004FB3DE7FF131BF4BB3BEF820E8B99CB051
+:108E20006640FE44EBFE598B305F77A1AAC3BE9625
+:108E3000D04DDC3BB6B8222171F46769B932EA45FE
+:108E4000AD2182E30F36DF5B7DCCCFE06DF00F38D4
+:108E50005FAF96DE4F9169BE9B61BEB983CFD70BE2
+:108E6000F39560FC108EBFC9C7F0E886BF87986D88
+:108E7000F368BD96635FEE28468A61F97AF72E9C07
+:108E80008A744A05B5837EC53E82D2EFC340BF6275
+:108E9000FF2ECEB3DEE263790902AFC460FE881113
+:108EA0000915F7BD3909B6FFED931F8C8E723C3161
+:108EB00082E7BFC6A8189704378DDD8FA1F8D9BE09
+:108EC000C77B690CF1D5FE15956C027A2BA6EB8158
+:108ED00073B90759DCA9DD13AB8A87FAC613EDDF36
+:108EE000E1FB40952CC9C27B529485D174F6672F63
+:108EF0009D73B8B9E5EC011FCFC3CA27F94CCE96D4
+:108F00002E85A34499FA71DB1B0DDCAF3CFCF329E1
+:108F10001D08CFF631F7A11D2DFC63245A3688BFFA
+:108F200087C54BFBF0BCD448513CAA574C45A75FC2
+:108F30007B31C7739D2B9F97E359E057F8ED493478
+:108F400017F95AE05B017802AE94D9D181F495C249
+:108F5000F9C60DCF53FF4DE17904D600743B96AEB0
+:108F60001FF8E6C01504E3602E7E14ED04DDBBD7C8
+:108F70001FF6FFF75EBFA087CCF5ADB4FB0F11D78E
+:108F80000D737AF371BDF942F9DB6D709E44CD65C6
+:108F9000FBDD7079F3AD329CC320960EFEB5B03880
+:108FA000BF53E6BC7F2450EADC7FF85CF74D78F8CD
+:108FB000FEA3DFFD2ADCCE12E7F9DDF377E36BAE2B
+:108FC0003F7D1E261993DEEFEA8EC789F886C88397
+:108FD00015710084035DBF67961C47F95746CC9D09
+:108FE00069E4D3323FD30B5DCFF9314F225CA5A1A9
+:108FF0003FB6A02C5501E5823A12033D71F1F143D1
+:1090000024413BBD20C0E47E41595202BF47C149C3
+:109010009617B89DC72B0BEA93D24ADB38969FE987
+:10902000AD8FDEBC1DE5E37363595EFA6D15CC7E32
+:109030003B14BDA1A302C62D67F9E461BA5F84BCED
+:10904000B1F0116F12EDADB26E027E54AA05AC30D4
+:10905000FD7EBC914CBD713CE47DF9F079B251C705
+:10906000E781B1DAFECB69BDF5850103FA6D290A06
+:10907000B0F3BD611FEEF7FF9CFD75F4AB9E6E8CE7
+:1090800062FDB66F9B685734EF3F817EC3A0392DD8
+:10909000C6FCA8A642CA613E874CF0731035662C08
+:1090A00086EF077E83F5142DF11B0BEC93651AEE0A
+:1090B000EF010E104F68F2B37CB9CDFEBA68363CB2
+:1090C0000BC98A4569E0BD82EB1D4A518A96D79744
+:1090D00087A495A7942CF02797914EC873F7B424D2
+:1090E0002B404F93D5BA01E38CF1252BC07F3CA6D2
+:1090F0005A8F810F5D2B67E745043E3C7E127F222D
+:1091000004F552D2AD74DC89011DC7293892C4BC64
+:10911000E58FDE9C99D6FEBFFD68057EDFD65879C7
+:10912000789E8D9F4319E2951B8BE73CE0A7E3BD3A
+:10913000EA67FC9AA95FF11C6ABFAF723A39F0E6A0
+:10914000C451605F3664C8A356748AA7114C3E812F
+:109150003F62FD78635476C8DE0F8387F2DCB30C80
+:10916000AFA58C3E9B7E3C310BFA7DFECDA53AF837
+:10917000FBFE945B8CFB86534F7B4DB05F4EE590BE
+:109180006ACCB77C7AE68BB03FFC43E3C11CD526A2
+:10919000174FFDE895191EDADFA9275F99A1227301
+:1091A000251D76ECBA73AFCE003BC19A434AEAE87C
+:1091B000B356D708F45BEB63EB107972DBF3B4566C
+:1091C000785E19CCC6F679A3E43BA1ACF85E1DF736
+:1091D000EE345C378B2BF0380E5D5F5308E95AA7ED
+:1091E0001B1088175ADE7110CF7AD38BF4F75121F8
+:1091F0002929BC10FC820AB6EB594D92904FA1A5CB
+:10920000EA803D89FFE52401BE09BEA6EF475AE387
+:10921000F7C1DDE9E7F90F3C8F70E39BB74F04F826
+:1092200008B9AECE2518CFE8F99A2F09F6E83DAA7D
+:10923000F19DE560075EA7E23C6819CF1BB9F1B369
+:109240003C58E488E3E5F0F884C06B263AD9DA4864
+:1092500062C514DE3F6BF4C560FC7D8D3A967FD20B
+:1092600018C5F2DE46039F4F3796E0B3AB3186DF79
+:10927000F73496E353E4F5E1D65E417B3A5E017A3A
+:10928000E81AE687D30DD9847C852C95F8E0BE26B4
+:10929000FDE8BF55C17E1BE44A560EF2BD04ED73D6
+:1092A000799EDFC8FC39ED15469F7C15F2B4C943A1
+:1092B000249047D62CE66708437FB47DEE1242DE49
+:1092C000B6C9F573F49FB74BF8FAE87CB24CE77770
+:1092D00077FD884A1790D3BF1D958B58EEEB373D2D
+:1092E000FC86FB047FF9DB36FADE3E9DAE9AD2D1D6
+:1092F0007689C9B13BF9F73BA6CFC8BA01CAB366B4
+:1093000064815CDF3E8B183A85E35D866C79B2FA46
+:10931000EAEF683C98376F3CD74120A7EAF59D5BA0
+:109320006CFB9831165911B7D1CB5D756AE52EB437
+:109330003312F98B2763BE31F76BEF9E678EC17EC8
+:10934000B13C21F0E23C8BEB159033979D657AA8F8
+:1093500057FF7CCCDE0BBDA771FC6F9BBD4989001C
+:109360009F803C057959962073E83C4397B2F8F703
+:10937000AC775304F2FBB4187D0FF6A8C6F24D0A81
+:10938000A24909CA3FF2C7670620EF3DE7FED42E87
+:109390008AEF0FBBBC06C41BBB9EFB0BE6672853C2
+:1093A000341FF077C1BE6398B7A4C8DD1AEC789774
+:1093B0000526CF57C19E8589607C802A6A8A6725E9
+:1093C0008FAF8F3CD5322F04E7BE1227ECF5B707DD
+:1093D00012B7B21D33317D51CA0F7ED1FE82168085
+:1093E000C7560F2B2F0B4C6AB1B04CEB67B37233DF
+:1093F0006DBF35BB332A6743D2D4C4968397425995
+:10940000D49FD862CD26E41AAE0F48285108FCDE5E
+:109410005BD669396C2BABAC4C7CEC29D6BBEEC06F
+:109420005F5E1C4DE150B34FEAC410DFBE9D12AC2D
+:10943000BB60EF4E94AF054982FBFE82A49484A3E7
+:109440009D7B1A0FEACDC2B926F04245C3A428BBC2
+:109450005F484B7A62B0BD9CC4EF0F1174F17490F9
+:10946000E9C74949DADE1E9776DD273289DF57835F
+:10947000200579B98D9D0776D37929EFAF81585BA7
+:10948000E03C2E79CCA3637C9CFBD94F0ABB89FBC3
+:10949000736EE10E3CCF262B7001C8BF952AFA816E
+:1094A000D7162637521B8AAC7DB630462D56D2E2EF
+:1094B00067F4B236BB336F2AC5674BB6B3DCC4F36F
+:1094C000E7A3D956369CD7ADD97BF738C8EFA92189
+:1094D0001DD77F13E6FB328B879FD83F2BEB125AA9
+:1094E0005EF7328B63ACEB7A4503FABE27C0F38E8E
+:1094F000BA2EBA12D657B34D267221E34B73229D72
+:10950000AED971019CAC7B7EEB5BF3FD630979A462
+:10951000C8D4E58B08E90E9E68F151FC3FA2E9939F
+:10952000803EBA833D2D405F6B67C99C9E7A5E305A
+:10953000559EFF5800E35CDE027196DDCB2AAF0436
+:10954000732B4F66FC4B0912E3DA4A76B30FECF942
+:109550003FB6C8683F838B7403857BB14A0EAAF47B
+:10956000B95DA3F8043E6B55511ED2F76D1EC44B76
+:1095700007DE3342DAD83D2DE3F77957829D5D5CF3
+:1095800067AE467B5B2F453FC038D2FB837912E73D
+:1095900011267F27EAA442A5F566050B117FC55564
+:1095A000D7AE85764A784900F83D4F495AD8FF77BB
+:1095B000991CDE2E273B7D2097234588DFED114641
+:1095C00017D63DA54817BBE53917805DD422ADDC21
+:1095D000F20BC06B76119E7B85F7EB61FD1C9F4DF6
+:1095E0007ACC07F8DBCDF1A9EC942DC8D714EFB7EE
+:1095F0004A37AC06B89ED8523FDF47E19AE735DBE1
+:1096000046503C1CDF52DF129D857828F2D1EFC70F
+:1096100003F52D3E8A97DD1BCD02DD569EF8099598
+:10962000EA48B4F52DE66CF09FDCB7069410FDFE19
+:1096300002F83F1EC9117CCFBE1717F5CA1113ECF3
+:10964000D226AB4FAEF8A85E28B6D59F47E5C20F2D
+:109650001E5210AFFF4EC7033941D76101DDF74CF1
+:1096600052D12E08D0B904683930B908F36DE9BA7F
+:109670004900EC86C92AEA7911C7D126C96837435F
+:109680007DA087407E11E6CF51791D87733E4A94B5
+:10969000C5751465874979980479FEBEA42FC2FB6D
+:1096A00048FC25B6BC0290BFAE3C04C5551EEFED8C
+:1096B000CE97A97ECD3DBA481A47F1F25E80EF8B76
+:1096C00072E93E96BE7F3FC0FC40B7C7AD2F43BE98
+:1096D0000C31BAF3593C2A3E159EA3AE2B1E359091
+:1096E000FFA5FF7E3586F6CBBD63D4B4F960FF1AC3
+:1096F00064FE41EFD862BC57A38150FE07BE08F15B
+:10970000FBF2B8FCF0707BC17D4E40C8134F365B56
+:10971000637DFBDC5139A1BE73704AC8F4813CD82B
+:10972000AF4FCD027B743C9753CDA9595F05BB4524
+:10973000E5F260879F9DCBEDC9269DBB08D8BF3160
+:1097400062CF4B10F2605BA30F9F0F5F3601E39770
+:109750000F5F963707E215072E7E1FF7BF6776303B
+:10976000FE3D73E805B84B899CB1A8B6311859A1E4
+:109770005F3E752FDE17F27D357E17E6CB43BE0EBA
+:109780009DD25DD9CE3CCC47395CCE0578DE808752
+:109790007D17F778A867BF847EE06D7C3DBEC43C32
+:1097A000DC57821B0FCE1DFB4907DEC724E0E0BE5D
+:1097B000BF433D3B85F9EB036C5F2AF297DC794AA6
+:1097C000623EFB8219EE3376E143F835041E44FB1A
+:1097D0007AC91CA50F4037B5671592B4E585F49D8D
+:1097E000DBD0F0FD6938EF9205F7AF243A2E29045B
+:1097F0003E48A29DE80F353BEE712551B5C77EBEB0
+:1098000024E83AEFE2E617B83F18F4B4660C7CAEF1
+:10981000E57DBACD1579B998A7AE9207C0AE3D15D2
+:109820007C6B06F8E36AA998005739512D3C4F7AB2
+:109830009AEF4BD47DB7E2791E313FE18F13E59A61
+:10984000BD8BD04F57BB3B84E7796A924C0EAEF389
+:109850005907BDB23DEFD64C41BEAD672FEB6F3C13
+:10986000E080D2C7877A753EAC3FD870FE4C38672F
+:109870009227D79D370EE0A3323CC07EF9C9109ED7
+:10988000D355BDB6FB53DFE2FBE365DC1E09124B8B
+:1098900006782A8158376167164D95DA474AAFDC5A
+:1098A0009BDC02FCB0DD656F6D0FB0726B70724BAC
+:1098B0007329EA67948BCB023F437BA8C52FCACF9D
+:1098C000A29CDCAEB1FB3AACA7BD06E83DDA1ECFE8
+:1098D000A75BCB4A507F2845A400E0360F1C2D2003
+:1098E000FF9EF6EE023FC38FFC896B0236B89D0ADD
+:1098F0001F1907FBCA34FD598EFEC60DAF3F3A7ED5
+:1099000017E0417C9F17B91FFBA7EDD0DF41C61CB4
+:109910007A8BDABA24EF692F9E33DCE171DADBE26D
+:10992000F920E7CB36D7BD1DBE44B3099B73C19F59
+:10993000EE7B9605BFAA672739F2A4C607593C5BA0
+:10994000554D7055D2EFA5EC7B80D1411BCFC7C9D7
+:109950003C4E4E86719C71BBFEE3CCE07282F07D82
+:10996000ACAAF7DECB3940FEAB3BBEE8966FBD4FED
+:109970002EDFF2393DC7A5C4B3415A5E93EC5C10AB
+:1099800060FC3905F87335A7D3923D773F076AFD30
+:10999000319FF967D837ACF2991704A70F9F7FBAA8
+:1099A00083623DFDE417B3CBAA999D5BDF3EED4A90
+:1099B00028D7DF51A45B69E245E2597D36E8905F24
+:1099C000F7707F51B56AA11CAB3E1BC1EF9FDF78DA
+:1099D0007EC779B6FEE385F0BB18EF16977C3E7024
+:1099E000F14BDBCB291DD73FE191BDB671EA9FE07A
+:1099F000E780FC545E3BF9DD047E570B496F9E22E5
+:109A0000C887BB3451565AC12E7AC42E1FCAC16EA4
+:109A1000EB6B0FF716DE15E0F5AD60FAFA4157FD76
+:109A200022D17F2ED677CF47C81F28839DA67EE2FE
+:109A300015F343F975B7ECEA2F478C3F06FB13F695
+:109A4000FAB703E35F843B25EECA4E568C66FE1DD3
+:109A500003EC80EFABB180FD3EAC6F737AAD3E7B23
+:109A6000BE03DF7D709FE078FFFBC6A8235FFFE6A3
+:109A7000443D9ED3F87680D16535B5E8B1DD8ED111
+:109A80008E3CFD7FCCE3D3CEE3920CF3B8EC6F3C7D
+:109A90008F42077FF6CDA3D8F1FED3CE631FF70B1D
+:109AA0003FC79FF375762FC07C4342BFF57C5AD7E2
+:109AB0004F69FDCBF4E9A3CFF92AB14278CF6D927B
+:109AC000DD6346CBE00FF8EA27B7BD7B39DE0B6DCF
+:109AD000623E8E57E4E3F0731E9BC70C7C5F91FBE4
+:109AE000EF3BB8BF0733DCD3DA1862FBEEBB2FBC09
+:109AF0008A60FE7A28817182FDF90BA260A77FE758
+:109B0000C21A7C36E7CF88823C6A0A7FDD916F4EAD
+:109B1000F70869CFC1FE91F74BCE7E59B69F47D962
+:109B20000CE751D2D41771B1CDBE3ACC03FFA2D607
+:109B3000FBE017B4DE4BC38CDE36FB1218176C8DBE
+:109B40007E31F37F26C4C6B9FBC2CB089BEF6529E3
+:109B500016F7D10CFB7960F1DC1F9E118575366517
+:109B60002F88023D3767CF70AC47C9B09E5561065C
+:109B7000A7CDFA17BB9EC39F793D0BD2E6C1AAB908
+:109B8000E9EF176B17788A2690CEBEA8759DFA1B51
+:109B9000AF6B14C7577588F90D361B8C8F824AFC42
+:109BA0005785D2E07C38D8DF1D21C5863C943CBC6B
+:109BB000DF727865E2DF659EE44898D79146B67F0C
+:109BC0007E9DDF27F5DBEAA630FAB55DE36C1EB3B8
+:109BD0002B3C909FE37F563BCFA70F26375A422C52
+:109BE0005EF3B584B3DDD2AA60DAFB4D28FCEE2A21
+:109BF0002CEC83673FFC7FCE70CB448FC3855B6BBF
+:109C00007478701B8C0FAAE1929BE983C34DD05BE3
+:109C1000A67EFE7FA1B307870E2FA4AFBF15BCFEA3
+:109C20005EE9EB1980D710F8F21FF03AC7F5E6D0DD
+:109C3000E025E4D81E8DDDBBE8EEE74498DDAF34C7
+:109C400051AA3B7C05C417BEA2A0BFF7F08E79EBEA
+:109C5000886CAFC7F4D9E1CAB9EB30DF351EC47BDD
+:109C60003C5F9363FF5E067187C5AC5DBF7972F898
+:109C7000BC14CEE67E4B6324F8115E8B5F3DE0FAA8
+:109C800048A56D5D989769BB8F4AE90FDFC3C4B8DB
+:109C9000A30CFC4D0BD3CF43E033D3B8C3C5E76B64
+:109CA000F1EF0F0B9F83ADF7D970D190E485D837D2
+:109CB000E492DEBF977101C0738FCCF2398EC2ABD4
+:109CC0007CB89F8C60A5A555A376029ECA223CEF66
+:109CD0004933D6819FCC7BF5C2AD618AB7D7AEC977
+:109CE00096BC367879230CCF3396A7B70B73233CF9
+:109CF0002FB7B7BD44E03E44773D85D7BB6639BB3F
+:109D0000978AA8E6D8C5B67375535CDFDDEDC74604
+:109D100022F8FD351E6F777FCFE2ED972E19B83D03
+:109D2000A963F7B950BA1B9BEE7E41C11F9DE14468
+:109D300034429FAF4B8907BF01743429C4E21E2A05
+:109D4000298478BDE8275725298DC2FD5D8F3116FE
+:109D5000FCB469FA291CA89F4C7015EB11E3002B89
+:109D6000C2BD2C74FF88FBC5329390D9B04FF4C6A6
+:109D70006E65870D191DE4F0FC999975C1E446B034
+:109D8000F354BA4EDB7CBBFE6BEEFF80EF5D876564
+:109D90007D53617F380C261F1670BAC955129BFC83
+:109DA000E01F5B21A5BDDFECF208FB3B251F847B98
+:109DB000E3EA38CE84FB121EB8E7E05A9EDF44483F
+:109DC00062ACFDEF8C7DC0E58ABB5DAEC2E2D1E442
+:109DD0000DC6CF7B76AD199B8E7F5EE57CFA41B8D0
+:109DE000C4919FB4247EAB07F873C9C2451E2304F7
+:109DF000DF99BCBC86CF638F96187B51A80F4E1994
+:109E0000E510874FD7914413DCEFB0A241C238521E
+:109E1000E90646772B36EC97D7D1E74ECE7F8B00FD
+:109E200007B6FE6EE578DDB32B300EE6BFA7D74F41
+:109E3000473BA6F3B8FE7E827EAFD591AB3683DF7B
+:109E4000AB5B22FCEF32FCA412F20DBA799E480BF8
+:109E5000FDBE11E63B6F24F2F7840D1FD4837CEE28
+:109E6000D2089E97FB8F762FFE7D0B412FBD72622D
+:109E7000C3478D907477AF969A0C7433B2A9EE1BDA
+:109E8000E9FCE416E7FB0F43F1AC7476AE780A798F
+:109E90002EEA2D560D4FBAFA57573AE59898F7081B
+:109EA0006FEA54BAFB1A7AE93039B0DEFB3597E332
+:109EB00002EFBDF83E927E5FB423C2E2777B9273DD
+:109EC000D6A2DEB2BC06C843311F01AF5C8BC1E92C
+:109ED000DA258A43DEAE5818749D476270FDAAD712
+:109EE0007808D671EFAE9726E3DF5174E987809248
+:109EF000D0E0FBCD24E50139715C31F0F97AA3F3B0
+:109F00005EE6D749E28EE9A03F1B94B47CF50CA72E
+:109F10009FD7AB565D83F36F567498FFB1E523AEC0
+:109F20002A07F952E5C17B828F35DF16BEC9B67E9E
+:109F3000A1EFDCF3FA6DF5AA01F5D6D22A27DEF6F9
+:109F400068CC2EB0AE647CB89ACA9BD9485FDD77E6
+:109F5000CCA4E31F4EE65CB4855527F0F71CAFE6B2
+:109F6000BF1F971377CEA4F2E684CCFC61D63F31B5
+:109F7000B9B1E4BE780BC4794F344CFB6937ADF707
+:109F8000325FDF5B0D03EB47373D4DB8CF793FE5DF
+:109F90008C234483F689FAF4FAE0FAEC2093AF6A52
+:109FA0006C1CC897EB36A4AFB709922B69BD137F21
+:109FB00055AAD3E56D7EA2333E59114FDFFE133D06
+:109FC000CCBE835E4A03E7BD59412EE7F47120A75A
+:109FD0005764986F575604EBBDD372FB7510EF3B77
+:109FE0002E3BE5F30FB278FC3C8BC9E713BB9679A7
+:109FF00046029E5A251DE8E1EDECD824A0B795CD88
+:10A00000C7D08FF02D5EFFBA50FC43D04F4B8E2C43
+:10A010009E3F92E2A56B3989494666F9FF31E79F79
+:10A020005C85DD6340F5DFBBA0FF68D377D1FE50D0
+:10A03000CD715F9BCCAE6C84BCC213B2B506F3503D
+:10A04000760558DE11894DB7DF2F13E0F338B17B69
+:10A0500078F8BE261E1CD08E3F4C3A6A70DCDD417B
+:10A060001DE28F872B95D4E57492EFED0EE23DAFA4
+:10A070006EBEC834FE70EDC013BB8767070EB6EE28
+:10A080005856E190ECC03395F7DE59067CA4754C28
+:10A0900049277F859C7E8DFBADDCF4239EB3393E42
+:10A0A0008E27079ED7CDF73BE7735D9D733E825F9A
+:10A0B0008E279B02901F4E479F6CB74BC9BCE9830C
+:10A0C000E859E6FFCD34CF389FA790134079104F61
+:10A0D0005BCDE5CD5B0DF746EC7870AFFF84CCF738
+:10A0E000070FB1BCADF1F19573461A7DF4795D1699
+:10A0F00093439F375D0A3DE3EEE7EF9D0E859E1B80
+:10A100008C0E855C70B7FF00E2FC23E1EFE3E81AF8
+:10A11000C4653E8818AC4CF40570448694F373CB48
+:10A12000C41807E76E4EEC0AE0FDF6D6166F12FE75
+:10A130006EC7F15D974CB2AF6707C7FF8A25D97824
+:10A140005DCA713976C528CC2F50F0BEAED78FE4EA
+:10A150002C80F2BD876490D0E4BAFA950AACEF8106
+:10A160002C9677BE62C32B680F0E97CE57D439F565
+:10A17000FF277C1DBD7696DA5306F493090EED5940
+:10A180003EB6CF892F9A0FF279D50609E5ED962CC8
+:10A1900003DFAF524D94DBA499E947E2A3F0A02A74
+:10A1A000E4182C02E0F1BFF9DF2953E39AFD7CD2D9
+:10A1B0004DDB6E9F0FF6A19B5F46EB8C8EE15E3010
+:10A1C000785E174A3C9935B24F3EBF2DD5ED1F45FD
+:10A1D000AB5C9EC5ED6DCEA7623D9767B1F5513B77
+:10A1E000ED87F8F799F8FA48CC456F7247CD4F00E4
+:10A1F000FE737C681704BC54EE43DEDCF7033ACBF5
+:10A200009B637C25EC1D77FB6BD584C36E3C94551A
+:10A21000E8C8C771DB21FFD017E9EBFFF96FAC2F5E
+:10A2200064FDD3E98BFF0778BAC08E008000000080
+:10A230001F8B080000000000000BDD3D0B7854D59B
+:10A2400099E7CE9DB9994966924932933738930080
+:10A250000625780321449E370991A0A803040C1A0F
+:10A260007044D4282144C54ABFD2CD0D893120DAAB
+:10A27000505DB4D67587885DB6D235586AD1D2762E
+:10A28000B0828FEA365A45DA8D1A1FA5800FA2AD2B
+:10A29000ABDB8FAD7BFEFF9C93B9F76626046DFBAD
+:10A2A000F12D7C7ED733E7FDBFFFFFFCE7B0A22591
+:10A2B00085449D04FF7C49FF3B9C1A20C44FC8F194
+:10A2C000BFCA8DBD6E428E45DA93AF81AF4D5D90B2
+:10A2D000ED2344EF94C9A3B4DD3B473EAD81F2BD0D
+:10A2E0007D36AF44CB2BD65F238769BB4C28F9A1C1
+:10A2F000DF9234287F097FE60EFFDEF0804CA2C596
+:10A30000B179AF867518CAC77A923502F3CDF14498
+:10A31000C60709D9AB109D9411F2F6E6ECC8265A8F
+:10A32000AE7112DD3D8590B9696CBDBE8D9FB77A67
+:10A3300027D3F5F4FCBA8414D2F5DD7DFB8AF0A4B2
+:10A3400038F37B6D844CA3130402369245C86D7CB0
+:10A35000EFAB528906E3133ADFA386F145BFC3ADE5
+:10A360008444CFA5F5E368BFF2583FEBF8CBAEBC11
+:10A37000702CECFBF09533C75E3329D62F111C9659
+:10A3800049E17F5E0AF3B6C92AC075D73D498D3DC4
+:10A3900071E0A673B85AE7873F76BA8F25FCFF971E
+:10A3A0006EACBCC34341B22965CEEC709CF90F93EF
+:10A3B000F0DDD3E87CFA46369F759EC57C9EC3F5DA
+:10A3C000D72E05F87FA6CB5E99C263A0414EAD8023
+:10A3D0007EF50E753C1D7F40BFD5739D619DBF4FBF
+:10A3E000009FDF375EEB898B07FEBDA2DE4C076F57
+:10A3F00093C197A7C33C3BE3AFEF16581FC5DF31AE
+:10A40000257CCF85747DC72F96559DAEE7B88DF618
+:10A41000037A7990F60B0CEF773DEFF7F6C691E9EA
+:10A420007249AD793D4B8F249BE9D2461A7BE3EC10
+:10A4300067685D6748F72B2CFCB74B191CE3A5FD3B
+:10A44000DFDE71EACDDB613F3B9211DED67132D3A4
+:10A4500065C6A7C02700AF2D499C4FBA9B9FA6FD9C
+:10A46000DEBE344FDD4486F30721DD97CDA0F5FD38
+:10A470003DB6D22DB46A574F4A6324CE7A27A7330C
+:10A480003AF0C97AF279B43D7983E103C80DF866F0
+:10A4900029A7376FCF0F5B882DD6EF0DA0832442FD
+:10A4A0007EDBEAC4EF36AF13C7A95BB84809D079A1
+:10A4B000AEB3130DE0877FE8B8DEF30A766CA153E4
+:10A4C000BD6E63657D15E53F69F87A1EE674B92BAC
+:10A4D000B27844F8D637C82678D62D34C3D74A9FE9
+:10A4E0004723B6DA78FB17F49C68BE2B1D113FE0BA
+:10A4F000E908DFEF61BEDFDF37B67BA0BD759E5D8B
+:10A50000919E11F9E0AA46335D9C6E9F6F7A830895
+:10A510008FE56173BF2BEACDFB5D4A5A66134A2A69
+:10A52000CB88EA806F1D6929799A82F2E8034B7023
+:10A530003DAF13520B729E9CBAB56451496CFC1727
+:10A54000393D7F5677EBA5202EDF505A4ABC71D695
+:10A55000F33A8793C0F7EB09E019E572F70DC033C2
+:10A56000D0EB32392E9EFF8BCFFB46C3C87CB4ACF8
+:10A570006E643C9FF07A113E6F34B427C33E8F89DE
+:10A58000791F64F3825E33E2E3C457D45B56FE1D49
+:10A5900020FA4D48C791642FE8111F9087418F74AE
+:10A5A000A4DB981C2F1E598F88EF6F855CB5B4AF64
+:10A5B000B36B0E233ECABD01849B28D72D34AFF365
+:10A5C000BD54060FCA7163431E83DCE0FA55E8BB35
+:10A5D0007B7F70FE5BA03FC7A7333CD4853E7100F4
+:10A5E0003CA87CBDC303FB7AD5E605F95A7E4473CB
+:10A5F00018E137278DB53FBE7364F8CD4963EB3C56
+:10A600009D9CB5EEF7ED6FDF3905C67DFBDB9F3B0B
+:10A610008CE32FFB229F443363E5ABEB252D1287A0
+:10A62000CF36789551C17D83058E577F3116C7F798
+:10A63000C9A4A537CEBEECE94E6CBF3454E9F05343
+:10A64000785EBB5152253A84239DC9DD6B85BCB32E
+:10A6500007C62EA270F7B7B7DC168A33CE6C0EEFA2
+:10A660003FBB4369F1F84C7C853E17ED96D9C38E0C
+:10A6700078EDAD7A7580F3B9B55DE80CE971C80E77
+:10A68000B2B41FED3AE6A6313ACC4C8A7E04F28889
+:10A690004C32DB61A79DD7D2DE3AEF651CEE89E62E
+:10A6A0001776AD757C9DC33F1CA2F413B7DE83F50E
+:10A6B000AF12A65FF5480AEAC3633BAFBD07CCB74C
+:10A6C000EB17DC7608D4E4CBA9416CD7107AA50649
+:10A6D000D9EDD4BD9301EF9FD5DE7B4F195DDA71C3
+:10A6E00025DCEEA11D8E6F92D06EB1CEF32AD72756
+:10A6F000AF813C3D17C623CC5E9D4747CBA56097F5
+:10A70000B5352054C8B79202463BD5B7E1F356326F
+:10A7100019EC87D0260FFD7DC2C64FD6835E262456
+:10A7200082FDDF75A83722BC09B373FB7BDC3BB627
+:10A73000D076AF825C80F1893A3654629013762FDE
+:10A7400096478B9FDF26C0CF99CA29B1CF44F350DB
+:10A75000C8E3FA1657B9BBA434B07702D7C17E0656
+:10A7600017B8BC3D14858B15ED1280CFABAFD86CFC
+:10A770006D411C16ED15611F072F0BDE755E19C8A4
+:10A780001F87E6A24B5904CECB85948EAADC3A8C67
+:10A7900057F6DB858F017EEEAD4F0AC830DE9CC0D8
+:10A7A0009B322D2FBE3829007E47795FE1011F1DA6
+:10A7B0007FE942C94B68FF790BC6FB07E8FE5236BA
+:10A7C000D071F26079C76AABC711F243986C066129
+:10A7D0000BA6B0582CF1B2EEDB3C8FB63FCFBFD703
+:10A7E000E6A6A09EF85DDF66271DF78EB6508E3771
+:10A7F0009DDA13E91F743967139295A5F5CD5509B4
+:10A8000071677C540BE5BD0F8AF13EEED20A08F960
+:10A81000992D1C9468FDD48CA405760A2F5F91981D
+:10A820003F6FB3368BEEE7E21B1F5D4FC75FFEDD68
+:10A83000490BECB0EE06317FE90258DFD259A25C39
+:10A84000EE82B22F85F787F55650F955185BBF3D5C
+:10A8500087CE9F21DACF58308FF63D5CD9526DA755
+:10A86000F3FFE8BBDAE649130999BEB0D2ABD1F2E7
+:10A870001319F50B52287EF6124AA7B4FC64C6954C
+:10A880000B60FD3ED9C6C7BF6A33ACBFBC413F0FAA
+:10A89000EA257DE5E65ABAEFB5CE814340AEEB3608
+:10A8A000E8CE2CFA3F2912E363A7A345CBA7B073E8
+:10A8B000ECAB8CE6E372BA19BD16444B408F0D9594
+:10A8C0008B69B9C450CE61E5BD9BC8D5F1E4ED6D8F
+:10A8D000994CEEED4D8E5FAF64307B80C20DF54933
+:10A8E000DA11A2ED8EA3573E4A77E37C079389EEF7
+:10A8F000CC88F1DBE594872B285F12275BA71867CC
+:10A9000098FEC8607287E89767803C5D0843D0ADC9
+:10A9100017A912FABBA42525321E688744ED4B40C7
+:10A920007FC8365CAF5F96AE5E44C7CB4A26E13D3A
+:10A93000F4EBCF2458A6FDB53DEED8782F71BAAF11
+:10A94000290AED84F16AB2734BDB83B171E8BA3B3B
+:10A950009C534CEBB6576440FDE2D29B2719E0397B
+:10A9600089ED83D201F6A3D33C3697F2C1DEBEF364
+:10A970000AC17EFFA945EE96F72D7610DAEECA4C95
+:10A980002E5F02ACBFBF9AC99FC19B53223DC09F9F
+:10A990004EB53464B03B031C1ED5772EBC1FDA3590
+:10A9A000F53948126DB77E4F653619412F367D3126
+:10A9B0009344A61ACAF6A80272A7E98B39F87BF568
+:10A9C0009D2F29C0A7304E80EE6BBD4BCB56016E3C
+:10A9D000EDF1F14F1D725C47D317E9449F6AFC9D6E
+:10A9E000C12936BE0FEB4FB7AFD8783289648E34A9
+:10A9F0009E82F54370B773B82BF1D7395FD02985A4
+:10AA0000B7CD405F4B39BD51E9877194FECB26F538
+:10AA100080BC8FCDBB09C7DF6BA778043BB02F3953
+:10AA2000007671B99DC9CFF2BE0CAF2EC5E843D0F8
+:10AA300085C0EBDE8C964ADCEF22C9DB131CBEAE70
+:10AA4000CBC4BAB83ECD6E08CBD718D627F8818EC6
+:10AA5000BF978F5F5681FCF32F4CFF50BE5901FC0E
+:10AA60000B760BEC438D962CF60C5FFFCFA8EC8099
+:10AA70002FC52383FFA5EE08E80101B7E1F0CF3F22
+:10AA80000D3EC7627D79DF330AECB32901DF8632E0
+:10AA900053B15FF691682AF8B5BF4C677A6D6FEFD6
+:10AAA00054D74CE08B853602220CF60DF66AB9902D
+:10AAB000B764D70B5576FAFB5099CADB00E06148C2
+:10AAC000FE469DCE58FBAACC5D0B3A689D2F89E2CD
+:10AAD0007F12DAA14E62F027BE9DC1E4584598C4AA
+:10AAE000B55B966532BB45C0FB7B1BAAC97B747FF7
+:10AAF000CFA533BEAC18D025C08BE06BAB9C7A8859
+:10AB0000E3F17BFCFB8F9753D269E4D4222EA7D8C4
+:10AB1000EF07A9990FEDB2B2A22512D589AB5E98C5
+:10AB20003A1EFC995B72E4C0FB94AF9648EA981F0A
+:10AB3000D171EB9C018C93093AA923CE801BE04E86
+:10AB40008DA62F41EF2F746119FE805DF269B7C4A5
+:10AB5000E89004D2EA4A12CB21B18E5B72149C6F4A
+:10AB6000D5E6F16961E3FAB89EB83C29FA2352347C
+:10AB70009CCF4599AE7FAD4D36D4BB993EFBD0A35B
+:10AB8000FD3483E2E15589D4E37A2CF6D26F78DC88
+:10AB9000C66A2FD5733BD20FE625F2B10D9DD3ECDB
+:10ABA000AEA408615D74F053B37B09E7D7A8ADC9C3
+:10ABB0004007BFCE286076ED15B4F202CA94CE6A83
+:10ABC000ED7D831C7B1ED6837A213A0DF8F4A50C0B
+:10ABD00062B2F31AE4508104766B76920A7286E2CE
+:10ABE00009E170D045EC2E3AEF73F40B78AB916F1E
+:10ABF0003EE0F0011D486A3B427F07F75B4914F4D1
+:10AC0000CDE57353D06E25A76E1D07F10A7F0AA309
+:10AC10005B3A8E938FE3443AE172EF376327F68015
+:10AC20007E12F253E0819C92713C517F505A54E065
+:10AC3000A5E583FE734BDB25B3FD03F650CC7E5AAE
+:10AC4000BF793EB597A6D7F6466D5E902AB72FB866
+:10AC50009DB6AFA1F6938BEEE78F194C0F1E0CEA51
+:10AC6000722A8C379EEE83FE7428393CA9C51DC319
+:10AC700007B571C280BF2C857EDD8C3FE0DB99C9B2
+:10AC80009091E163DF06FECD4A65ED87E93D5EAF59
+:10AC9000490CDE5B2A999CB0B6B3F171D73AF5DA6C
+:10ACA000AC42A37D1522408776C2EC2C19748F1F0D
+:10ACB000F519C2ABFACE8634D09B9FF52D4D239368
+:10ACC0006272D4E1FCEDD8F7A91C899225DF017EE0
+:10ACD000555E9709D8CB7738185D2AE9616F06FD74
+:10ACE00066A6C4F79B27F2F564825F4DDBDDC3FDEA
+:10ACF0001EC717E7A3BF9D9FC9E245A9397528D78D
+:10AD00000196018AF73432A87B0D784CABB099FCE0
+:10AD100007C71793B1FF99DB0FA509EC873293FDA5
+:10AD200020E6B5DA116FB6E6E0FA45FF1539AFD582
+:10AD30001043FB9564E00E186FE5FA7C53BC289134
+:10AD4000FD3137531AB217F4B8EB524CBFBF49FD6F
+:10AD500045DD38FF31367F6CDE14CA70B179E54CC1
+:10AD60004DCB44BF6F96F7E8F9F4E3A2BFCBA877C9
+:10AD700050FE53FDA4ED70A35EAA05B92DFC24E09E
+:10AD80007F6F1AF077656DA6DFA027793FAB3C3A5D
+:10AD9000C0FDEA035CDFA41D117663724092627A03
+:10ADA00067B8DEE276B1453E9ECECEA674AB1BED13
+:10ADB000806178CEFCAAF6655102FA98F00FB12FA7
+:10ADC000CB6785E512909FB512194F3FD3E799F5F0
+:10ADD000BD9EC9FC109D329CD16F59DC606ED701BD
+:10ADE000EDFCF04D1995DF62D447920C728F8DD730
+:10ADF000CCE92178E2552540E57094DB43BB7CDA51
+:10AE00005D40171DC9A993414F74248F8D405C622A
+:10AE1000C7FF5617EFA0EB1F7CD9A1F6C0B0FB18F7
+:10AE20009D542E5FDF6EA7BF3B7A256F1289ADD38D
+:10AE3000BD41D256533EBE9FCB89261FDB4F932F79
+:10AE4000AA8CA3F3E735B17514F41E90EC0679577C
+:10AE5000D0C8DAEDC87498F4CFA350A6E33C22FC26
+:10AE6000111269AB2983F69A1DCE41F27A258C0F17
+:10AE7000E7B55040507AC853D9F86E35225D3B296A
+:10AE8000B6DF2EDBA249A027BAB25254D013277DD9
+:10AE9000E1C760BF4DFDD128806B7A7F9F1DEC3DDF
+:10AEA000975FDB0DBF8B7D06646F1EC8D9947EB69D
+:10AEB000BE6E0BDD1372175F570F93BF32799E0082
+:10AEC0005E4086D0F9B23615A39E12EDB332B8DEDD
+:10AED000C822E127D0CE225D04F146701F599B267F
+:10AEE000A0BD2FF01AB3AB264E01BBAA686BD4BE2F
+:10AEF0008AF67BFAA1F8F1FA17399FD07D1C34EE5F
+:10AF000023117F08BD26DA3912F8D582EE536AE3A1
+:10AF1000DBAB5413607DE572DF95B0EFA60E8524A0
+:10AF20004931F8BBFCA12320B7F27A7748001B2BEC
+:10AF30009D7564FC50CAA7FBBCF546E29549E275D5
+:10AF4000376D90B5D5467EEE5018DD28E6F33DE12D
+:10AF5000677CC2E305B3FDA163008FE67DDB14C00F
+:10AF6000F38D3BDF51463AD7192DDCA446E6BF34BA
+:10AF7000D53B23B0DFCAE576C4E39A0E2502F2A9D9
+:10AF800069F79EA80DECEC8D4405FE6FEADD732891
+:10AF90008FC227BF499B260762E3E5374524584FF8
+:10AFA0001625C63EF4FFA20AE86D2B7D839D0CF6A4
+:10AFB000CA2117E3FF0F2BDDBA44E1F8A123DC041B
+:10AFC000ED3ECC4D51F5600CEECFED99FFBC4459F0
+:10AFD000DCF3445214BE5DB69E1C276DD7759EA24D
+:10AFE000023DB9FC618F8FC229C31EDA0BFDD37DF0
+:10AFF0001EB58DF60D249129A8AF470987E916BA29
+:10B0000098BE91F1CB5C5FAAB003A7805C3AD7E70A
+:10B01000117614CAAB430EB68F0EC2D6DB99A915B2
+:10B02000C07A883703E7CD6B8A4AE00758E78DD1AD
+:10B03000955688ED47BDCE5E05E4FC1A2E6F2A9723
+:10B04000EF94DE33D041A98F9DCFE6EDDE21817FE5
+:10B0500048EBDB6A7CD89E2481BCD9CDCE29D6D0E2
+:10B06000FAEB0CF245EC238E9CA980F5B9FBFB9E14
+:10B070006572268AF427D66BC5E73C1FB3EF2EA274
+:10B080006602FEAEE8C5013ADEA1C2641C4FF0BD07
+:10B09000954FE7F9189DE7D5EF94209EE04B61F6B8
+:10B0A000A4589F68B7CB5755EB4338F4211CD6D62C
+:10B0B000DB116F623D354A681CF865CBF878CF5CD0
+:10B0C000F1963240CBF7FDF415A4C7B5DD9286FEAC
+:10B0D00042F72BCA5288DBE9FF2E439CF61266A288
+:10B0E00090ED3F7905F5CA257B59FC60EDDE3DF614
+:10B0F0006BDD313A0D9E786625D0D9DADE24E292F6
+:10B10000007F01E4532B9D523983744F7405CFB9EE
+:10B11000A89CD451AE927010FC1421873B397F1348
+:10B1200037FBFD46BE6E316E4C7EBA90DE8327A69D
+:10B130003CE3A4F05CAB4AAA0BF891C39B8E1F457D
+:10B14000394C4821F86B627C2BFCFE99DBED71F0E9
+:10B150007C1BE0D9AA4F849E0D3E5C45E02BF06736
+:10B16000E7701FD2EF3E05D7DBE1B3333D5FC9E2A5
+:10B17000DA1D0EA6473ADA9C11E0EBE7D22F7A5E91
+:10B18000A2F2D293A144E17BD0B6AA09EA0FE6B1BC
+:10B190007574D93615B7303D76870FF1974A987C8C
+:10B1A00062F2E8BE1F3379D2A4BBD17F6C0AD7AD5F
+:10B1B000C673099F4B857309127E5659EA89D1835C
+:10B1C00015BF81270E28015A7F492FE38318DC9889
+:10B1D000BE12744BE51CE2BD33539C5F868300575F
+:10B1E000EAD7B741FC41F8F5A90D21DD1318CEAF20
+:10B1F00099DCAF9FC6FD7A4785F36FEAD7AFD9F0E8
+:10B200006BF4836ECA7901BF825FA8FF68E2AB2747
+:10B2100038BEEFF731BDFA948FD1D59AB25EE4878C
+:10B2200035EFB7201FB96B993C71F79BE52021776B
+:10B2300073FB602B8E5393D27B910C7EF2BF4ADE60
+:10B24000769278DD37482DFF097932640FCFDF38E9
+:10B2500045ADFC720A571787016FF76B1FF3B73EB6
+:10B26000DC4511017C696F5146B2874F372E89BE8C
+:10B270002601BED770587FB8BBFAC23F409C7157B9
+:10B280001AE6B37CB07BC937FF40FB7FB873AE0AC8
+:10B290007ADAD71E42FA19F4BB54882752F1592B97
+:10B2A000517A68EBFD55EA4C382F7BEC8229203728
+:10B2B000DFE57C79E2C7F20680CFA67F7B7C0ED4E7
+:10B2C000AF894899603F7EB8EB5FFF0A7AB171E7BA
+:10B2D0003ACC4B6B7FEC976897DB223BD8EFBBD225
+:10B2E000D0CE3CFEC8B63900F7F6DE76AC3FF1C8EA
+:10B2F0000E2C3FF36F8FFFE22F60778452556877F3
+:10B30000E2C7DBFEE92F40E775A92AECA3296C67A9
+:10B31000E7B982BEAD726BCF01E453412F9780DE57
+:10B320000538D533F923E8F95D7EDEB4AADADD0508
+:10B33000F2ECDD2D9EC6787146C5CFF002B11894AF
+:10B3400063F512C6D9BA28D540BCA32B9954C0378F
+:10B35000655254C9A7F35CD1B0670EDA3DFA3BD70A
+:10B3600043FB25FB5C640BC6E520A84BFD0124755F
+:10B37000424AA8183C4AFD663AFACE2F29DD1EA69D
+:10B38000F201F58EC51F58D2F5C2FF801CAD730EB9
+:10B390001C0051287EEFE2F11BDA1EF54EF9FAF897
+:10B3A00071D254BF9BD32DD39B797B171504504E7C
+:10B3B00024A9E30DF6E998232D5B203D29AFB1EFD9
+:10B3C00022D8C7C5C5D74C45BA80F81FE81FDD8D08
+:10B3D000E3AF85F825E5BF73FC3C2EE225BE19746A
+:10B3E000FE1A3BF1B9E14BC86B0E94238FE2B8D43F
+:10B3F000FE40BB2AF0CB2B1E057B64BB239C3B0D80
+:10B40000C6E9E27A6B275B37EDEF8573543A9E7796
+:10B41000C6141CA7CF9181FD75D67FFECE3629B606
+:10B420005E4AA963416FC178656ED0337A3DE227E9
+:10B43000A0E0BE4E40935CDCF7E4152531FEB5C6B6
+:10B440007D409EC1F9F06C7F65857F5AEC2BE2410F
+:10B4500056786EE4F53FF36BF825BB324D7A2591B3
+:10B46000BDF2CC151F33FDFBB37750DE34031DC393
+:10B47000FCE1F74DFAF75A41C74FBD83747CED3EAE
+:10B48000A67F9BF7952A40B71FB46AE43D6A8036D1
+:10B49000F3F3D7EDD2C0F598EFF294CB0B71BD8FDB
+:10B4A000B9BE59B3F59DA3706E5AB82F17FDFC8F26
+:10B4B0009F72D5C338076D3684E7C19EF377B44BCE
+:10B4C000C67532BF80DAC148AACDD44E6576F0EA9F
+:10B4D0006DE0A7AD6D242AF07FB3857E9AF7BD821B
+:10B4E000F422ECE0E0C38B5733FBD3A5BAC08F9BAB
+:10B4F000C7EC5142ED51689F3E2FD2A6207D959614
+:10B50000037D3D73C52F3A418F37CF235E187FFBF4
+:10B5100018EDA97CDC8F4420CF65BBA3BBCA4EFBD2
+:10B520006FAF0978292429DC76A2DD4B8A15AEE7B6
+:10B5300056A3BDDC9C73958A7C6695074FB5A1DD4B
+:10B54000D51C48C6F55CB24FBA85D9236EC2D62F3A
+:10B55000217D5E12991981F8D9471C7E028E1F3B0E
+:10B56000FA56023C3EFE0925445A7FC93C46AFE9E3
+:10B57000F37A518E3CF7D47CD4E3822E3D4F26A142
+:10B580003ECFB07B2515F5DA9224235EBB1D4C2FF0
+:10B59000A5733D53B495E1B793F353A7DFC6BF8AB4
+:10B5A00039FEE2D52783DEFD88E31FC508C8772E64
+:10B5B0004FD6AE8E223F35ED66E3F992B4D25B0DE5
+:10B5C000F4EBAB667A519C07C0F9C0A238F2E231C5
+:10B5D000BE8EE0C3ABB681BD7C31C53BA894BC62D6
+:10B5E0002E47295D00DCF21A43480717FB6E5021F5
+:10B5F0003FD59F49D05F1C6C5348BCB8CFE35C8EED
+:10B60000FA3343651087F6677BD0CEF1CB953617BA
+:10B61000F42B95D49E009E7BA29D37E8CF557B4CA2
+:10B62000FC1E2AB3D176C7B23C0CCF91DFD8179756
+:10B63000001F06D8B816BB6FB8DFCDECC685DDFAA3
+:10B6400064F043C4B9868043A42DB9DE283F7FC28D
+:10B65000E11099C8E2A9D4BE77635CDB4BE701FF38
+:10B66000BE67E623CCBF6FC7760FFB997D5443F7C7
+:10B6700007769BBF28B49EE9538F1A0F1EB3FDC2F5
+:10B680002E5F590A7E65739D5B057EBBEF67D22AEC
+:10B69000A467081682DF1D5E8D7820140FC00F246A
+:10B6A000CCFCD2E69650243EBD2F42FE6B06FE93A4
+:10B6B00090DE310E4FE93DC2E89DE93FE1FF837C1A
+:10B6C00034E61D0A3920E44BB3323001E858F04328
+:10B6D000F39C810900B7D1CA938F1D94FF817F2805
+:10B6E0001C807F04BF789E667CB2A52D5009F55B57
+:10B6F0006A88B7DDA08FACFE12AC13FC4E21D74F89
+:10B70000FA42C7FD1007B0453B21BF42C8E1E6A79A
+:10B71000374F8897FF26E4B0D3CEE49B339212696B
+:10B7200037D0179CF979A6E017F3795236C48F8F7A
+:10B730009CF2BB791C7F74F91259A0CB41DEF4A4B2
+:10B74000605EBB881759C7FDD82F99E232C26F815E
+:10B750007307689F93C5F827258BF3679688CF46B4
+:10B760004CF41FB085DF813CA344FA4BF4FB5BC56E
+:10B77000AFC43C428F5AF12FCE4D603F8B26256ED1
+:10B78000D77D80C9272B3D4EE47C72147C0FDAEE06
+:10B790003FF839D770FCB2714878A2292FAECBB6EA
+:10B7A000A7315E1C4C9C779087268E2AEFEE402BAB
+:10B7B000CBAFFA0F9E674B564F34E559B9D5401BB6
+:10B7C000C451AB9CC15219E765712CCF1CF209E83A
+:10B7D000E1C9FBBA8B217FC91F329F9764D7279B92
+:10B7E000CE2372C319A6727E639EA9FD989642531A
+:10B7F000FD391BCE33D507F529A67251D70C53FB63
+:10B80000F1DD55A6F2B90F5C6C6A3F31B2D854DE57
+:10B81000D2D65B0F78397FD795A67E5576AFBD948B
+:10B82000C2B5A47795397FCC02CFB4BFCA71E9B055
+:10B83000292B8878ADB29BF3882FD8678607A4CBD5
+:10B84000019C27133EDE9C635346CA6F9D4CEC7FE0
+:10B850001E10FD83C3E9813807D4501C3F53D0B973
+:10B86000285BCFB584FC3853FA4BB44E417F89EA4C
+:10B8700013C1ED3B9CFF055C1C4370A95747828BAD
+:10B88000E3747021142E9EAF0E17EB789B529A3101
+:10B890004FF8352818ECE38156F37D98657A1AD372
+:10B8A00043A125A7B1A3591C389CC4CE2BADF5FFED
+:10B8B000C9E1F2218509E261947CFD16C7437F222C
+:10B8C000BEDEF0C9C16C90DFB504FD666F4BDB27AF
+:10B8D000A0B7AEB64709D0FF7D7C3FDB79BEE80359
+:10B8E000AD5E1CE7417E1EF9506B007F7FB8B51836
+:10B8F000BF9156157FEF69ADC0EF4E6ACFC1F70714
+:10B90000ADB5F8DDD51AC2763F6CADC7EFEED630D7
+:10B910005BD7307C9172B473429971E3A5D7E8F29A
+:10B92000A8F044E482B8FA32E13872C388F9E51B22
+:10B93000FAA5C79F35F0EF5B591EDF51C86D9C4ECD
+:10B94000A6C3F9E6E9FA7FDE4A1E7F76FCE8F948ED
+:10B95000D013399539211E5F87795EE563DB57DDAA
+:10B96000A54F4A0CAF189DC587539DF3E33C70D695
+:10B970002783CD60E82FEE9F88725D382DAEDD9075
+:10B9800097CDF46E7D123B8F5F6EE1EF6F6533FAFA
+:10B99000FD5636D377BF4B2067D2793D5DA703CFE5
+:10B9A0000787F1DD3DB3E3C1F7AEEC80292FC57AFF
+:10B9B0006FC53ACEEF1CDD63D4387C76BA71C4FE15
+:10B9C000ACFDAEE2FBFF663661EBFF7FC69FBFBBFF
+:10B9D000CE83FE03C0CD6FD8FFEFAE4BA98F179774
+:10B9E00069CF66E7A1D43A27C10C34F575056CC55B
+:10B9F000621260E7BEE3BC101F12790189E9D58E9F
+:10BA0000712484A13C1CAE141F01A5888E6F1F9A5F
+:10BA1000276A8779545B4CCF42AE0D31DCFF9087AB
+:10BA2000D303EDAF2B98D7339007EB3B537A22F239
+:10BA300043E3473AA71BD6FF0CE5CC9AECBFAF9C7B
+:10BA4000117C4E4EDD3B3E9E9EAC87B967507BEC31
+:10BA5000FE87989C39CDB8670ABF7A7900CFAF4787
+:10BA60000DBF7DBE51C5A53E77A54E26D4AFDBE008
+:10BA700064DFDB93537BE0FBB96B6C84A4527E8163
+:10BA80007552BED5AB08BBBFF596F09B5AA683BCDA
+:10BA9000DD9E1B7A309B8EB34A61FEE29FB2B4EF0B
+:10BAA0004339999F0B27F37361255BE98432D18A6F
+:10BAB000715F17F07D75DA0263615FEF4BEA44F066
+:10BAC0005BBCB6880ADF54122D61F9799130F86BAE
+:10BAD00099E72707C0DF4D9E40481FC6C75517C4CA
+:10BAE000D19494C117C701FFFFD286F7A21FF7B206
+:10BAF000753EFE403E9EB350818FF26232FC4EB7DF
+:10BB0000B205EC72DAFFFB52F8896CBAAFE35EA7BC
+:10BB10006EA3EB9ABCF9BD8C0CFAFBE3FBABF05CBB
+:10BB200021BA4BD615B8DFD0F7E1772FA1E35DD06E
+:10BB3000E7C0F8F3054446F9BEC64EB6021F25829B
+:10BB4000EF07DF889F07E6C8914CF95DD6FAF7B991
+:10BB50001EF82041BEF16BBC5EE4CF3844FE8C5F22
+:10BB60001B317FC661C99F71D84304CE851D43F93F
+:10BB7000330D04F367E838C6FC990FAAE2AFA39F20
+:10BB8000CB73C7172909C64DC5DF3F281C799F8E87
+:10BB90002F5CA67CEC587F37FE9E287FE73301A7F9
+:10BBA00004F94B9F0CAD2F97E899C67E8CEF62F39A
+:10BBB0001460BDC3920714AB67F93F1DE98C4E0EAC
+:10BBC000E4787DD7D0A1AF2103789FF36AB7CF0186
+:10BBD000F1A41051F7E0FD1EBB637040F06121B489
+:10BBE000B3BF0B76B78D4A5EB0BBAFDEE07877C0EF
+:10BBF00020B71669E63281F60639BC1862D8741F80
+:10BC0000C9E71563FEDFA72490E61D418E3638E5AF
+:10BC100090DDB08FFE0476C4859C0EFB73E3C3AF4A
+:10BC200030C766CA631ADE9FE703F07B68B77A47BE
+:10BC3000969F00DF70A6717C2B1E7C587F3A38FBE4
+:10BC4000E1B00DE26A9512CBF3FF9BC33B9DE7BBCE
+:10BC5000B1FB030E4BBEFAE25CEBBA59BEFAFDE94A
+:10BC6000A19939D82F30C1785F60AF5D4B9942BF41
+:10BC7000FD5CEE58E1B289C3D9BAEFBD3CEF3E5945
+:10BC8000262D7B0CF0B7EEF71B398CCE45FB0E074B
+:10BC90003BCF02C1E7A4726F0561726F454E21CFA1
+:10BCA0001F4FB703BE1AD8106485F7109E2F0938AE
+:10BCB0000F831F87BB158E21125809F9DDA783E773
+:10BCC000865C6D450E9DF79A57921590FF2B9D83CC
+:10BCD00007C1671DE8B31D1E47BFEFB8C71DDD498B
+:10BCE000E03CAEF8C967E837B542657915641EDAFD
+:10BCF0003F929E2F7F79FEE8ED9FCED47031F0C742
+:10BD0000FB3C3F5BE8A5CEBC131320CFFEBD8CCA25
+:10BD100029B97E8CC36B9940473F4F6274F4001D74
+:10BD20008996D7FD6222DE87BF2A37AC423B91E776
+:10BD300047B4C109909770A670A27F1C4047A783A3
+:10BD4000D39A1CC2F831353E9DF4E4B0F8DFE9F82F
+:10BD500003EFA195FDFDF843C0539C6388F5A9B995
+:10BD60008C0EC557C0CD9A4FA4E6DA783B96AF78D3
+:10BD7000556E08E17C72CC27475D74EDFD4AFCF7F7
+:10BD80001D9E1CE5FE05BCFF5E72B83F39FEFA5EE3
+:10BD90004CC0C7FFA8F54DCDE5F43339FEFADE1EE1
+:10BDA00025FC4264F0ADF4BF831EA3789E0A78267A
+:10BDB0001D83281FFB33E2AFF3AFA35E67D8F1F713
+:10BDC000D0B782BE897E4D239EDFE724C73DBF5F8B
+:10BDD00046FD29F087ACE7F8E2BC9ECA0FDC6F9DF8
+:10BDE00073706526E07D1EDF771689A6C3F9E62FFE
+:10BDF00092F03C60989EE4FC41E195920BFA64E17C
+:10BE000020C635FA27C4970B29B98CEE86DA77B1AC
+:10BE10007912DD43C8CC9546750F819485311E5843
+:10BE2000E97447658A875B383E94FC9B54B00F2BBE
+:10BE3000735E3A02FBA4F0FF70089E86FCBE13AD51
+:10BE4000CF7BC73912CBED35F213E52D71F63321D7
+:10BE50002B3C21D7106F5CB3EB05EF3803BE4AC80B
+:10BE6000808DDDA31EB499FCE46C72467EF27E17D1
+:10BE7000E397F73242A80F403F80DEE97CFAC252D6
+:10BE80004026D81990DF33E8494639DA9E37A3387F
+:10BE90006080676DAEB02FE50476E3D7BB1F10B3AB
+:10BEA0009B2493FD1A1BDF8EBF0BFC54BA5F8C8B57
+:10BEB0008F0959DAA500CFBF646897C1D70A3FFD43
+:10BEC000CE59E978FF00E0373736DE10FE13E0F98F
+:10BED0001B595A3DC04DCD0CB0BC0191D73714BF92
+:10BEE000B07B8F3A63F01E2D5E92797C8DDA0DABBC
+:10BEF00061BD4A12E747E2C67BE4C26E2116FB86AB
+:10BF000014337F7745CE4BFF03F19FCE54C6B29DCD
+:10BF1000FFE4423FF06AC9ABC0BEA9FDF1E6F76994
+:10BF2000FB3089BEF92DF40F859D91227F9932FA5D
+:10BF3000750AFFF97479D6CF803D46D7536573E310
+:10BF400079E733747FB9546E5429EC5B399F5215ED
+:10BF50001DAF4A2ED83F40D7F51939953C9B7EBF7F
+:10BF600043181CD6BFF2870CF047ABEC8E1346B9D2
+:10BF7000658D7FDC956B8E7F7C4616FEE67C80CBE4
+:10BF8000AC0C84CBE4A7E6651BE32F43F10FBE8F17
+:10BF900025FA354C9E5AE49C906736277B6F84685F
+:10BFA00024E0CDC2381283BB2EE1FB57B345199C68
+:10BFB000145A9EC59124417FBAEFD9FC4B56857324
+:10BFC00040CE405A0FCC47BDBF1CF8B65FA806E074
+:10BFD0003B570AD9D93A222C0F91B414407B9B735A
+:10BFE0004086F945BC02579205E3887959D9C3CBFD
+:10BFF0001D759FAEBC2E303CAE41DC1EB47F15BE1D
+:10C00000BEE35EB76E33C43B92DCD1E398BFCABFD8
+:10C01000D6B8C7EDB2AE43FE7632E94579E9767F10
+:10C02000A40330BCC42B41F9FB52F8E7C017479575
+:10C030006E12A4BF9FFCF9E704DF65831B6245F025
+:10C0400035EB27BF7B3DE645FB43768B5E0A4BC055
+:10C0500047D9F5D6DFCDFACA49FAF1FE90140DE5BD
+:10C060007C9979FA784EA2388EA38AA17EF0466632
+:10C070000F1F4E66FD0F27B37E6F71BDD49CA110BC
+:10C08000CC8BC9723AC19EFFD8730CAE6C823EE96C
+:10C09000027DE274688857A157D6EEBD9900DE9AFA
+:10C0A000F72D4238FC5E62E7A4FA0A09F319C4BB13
+:10C0B0000FF593C8CBB4279991C7FC94A5CF8757A8
+:10C0C00034D172DD4BA4244ADB95CE0DD5C0FB2EB6
+:10C0D000ED2544DD44CBEDAEF08F7E02FB7885BDCF
+:10C0E00037B68EDFABA59858B39B8EBFE3CA31EA53
+:10C0F00016D852F56027E40B0D6E265EC82F194640
+:10C10000BFA7283F507A7804CA74DDEB5687FFE555
+:10C1100036DA3EF725A2621B5E0F3E0AE04FE2745C
+:10C1200001BFCFA5BFAFE37454B45F62E7FC3EF636
+:10C130000E180E0EEF7439D9FFAEDB5F79F934BA01
+:10C14000AEA2BEA948DEE3687BC883824C04D69EBB
+:10C15000D8E2B51F07ED0370AECFF043F2147C3F79
+:10C160008970F937DDC2873363FC80F5A5BCBC8ECE
+:10C17000EB2913DFC038D46FD7CAD9B13FF6F331FA
+:10C18000FE5089F8C3F8790689FD8171AB63F3A08D
+:10C190005C9EC7EB0E2E5F80F9DFD3EDD103C0EFBD
+:10C1A00033F9B7947F81DF9D148E57D85B0EFAE97F
+:10C1B0007ED23710B50D666908B4C37865242403B0
+:10C1C0009CCBBD9BDB617D1736BC9209F475735E19
+:10C1D00011D2DF2CA75AE4A224D25EA1AADE2278D3
+:10C1E0006F4C42B82CAD774620CF6DE9D07B3FE154
+:10C1F000E032CA3F5784257E0F3F1C6C30C46D452A
+:10C20000FEDFB224EA5FC791DF37E731FD2EFAAFD8
+:10C21000E3F75344FDDA3C37CBCFCCBB68461E9ED8
+:10C22000C7B0BC68CAFFB3F3A6C5E40A9D17F356AE
+:10C230009610CD01FB5AC2F957F0FF52ED56B46784
+:10C240009786CC76E9EF25866F7DB98476E215F581
+:10C2500023DBAD0BF3C4B9708117F500117A8AD1D5
+:10C260009590E78B41BF831CAEA5FADC603737DCC5
+:10C270007E2A1DFB65FF60ED97E7C4EEC3ACB3DC1F
+:10C280008769E6F761D6ED6B736401BDF3FB30EBB4
+:10C29000F6BFD369CC0314701A7E1F6610F31F9784
+:10C2A000299103704F68D94D748FB4FDAFF8FD89A3
+:10C2B00067E1FEC494181D79AE7445597E9D867958
+:10C2C0007E05DE1415F252BA6C5330AFA82BD5A3FD
+:10C2D0001AF378B6B4B5D4403B914F24EEBF2C4B43
+:10C2E000706EFCCD3C663F6F97585E97BEDC89F060
+:10C2F000F6CBE488F19EBFBF2884F97433F202388C
+:10C30000CF761E5F80FCD3A9F41BA1661AC317EB7E
+:10C310006F950F74BC0E18AFBA48C53C9AEA3496B4
+:10C320008FE6CF0C95DE3229366EDD7E96BF57172D
+:10C33000FAE410CBC35D5406F04C24D7ADFA8BD28F
+:10C34000DF3D408FC3F556B819E8CF51155A7E1D11
+:10C350001DF7E4CB0AE6DB918D9AE4A0ED7EFC822A
+:10C3600057857B781D95A14535586FC77B8259F558
+:10C37000249A44EBCB5E527A20CFAF91742B304E8F
+:10C38000A3458FDDE47E56013EBD69A72346970491
+:10C39000F213D52210784DBB87C545500E09F964BC
+:10C3A000A56732CE2C874A85DCA5F281E5F73530CA
+:10C3B000BD477E20417CE8A4E798CCFD6B947BD3FD
+:10C3C00084B0B2C8FB69FB9F437B46C0730E9517D0
+:10C3D000E0C749F0FB64EC87652A4F8B21EF742698
+:10C3E00049467A1B6647F0F5950DAD9FD94D424EF3
+:10C3F00056561002EF2358F143E7433A17E77D7092
+:10C40000B402E70833F9FC9FDBB449D120E08B4448
+:10C410006C14CE9D520BEA1D27E481D2EF16298CB5
+:10C4200072F1A7BA2E035C2F242D4B160611EF2FA5
+:10C4300001DE6739FB52000F4715D509F5359030FD
+:10C44000885F33BEE6BBEFB303BCE6E758F1A2DB7F
+:10C4500001BE0B02C3F085F70BB404F8D2845C2153
+:10C4600066B91224A7D8FDE6CD876E03FFF874F6EF
+:10C47000C9F7B2C247E3D1AFB05312E5E59DE4F28C
+:10C4800078B47979271DCCAF984106AEDF2D0DA782
+:10C49000938F0F6E90730CF424E8F4699EA72FFD20
+:10C4A00092E7FD967950FFC5F425A383725E9A0149
+:10C4B000F465A083D9FB5C5199EEB394F79F01F426
+:10C4C0003025A62FA33677402904BCAB5DB23CDCF7
+:10C4D0004ECECA0820FEA7DA34C4FF34EA8171BB0D
+:10C4E000D39D4FF75FE1EC6DB70710FFDF07FFA6A5
+:10C4F000920410FF9516BD53EDAEB3039D543BADB2
+:10C5000078D610FF35DE61BFDBBE0AFECF01FC0B23
+:10C51000BD320AFB94E27F42FE08E78D89F07F413D
+:10C52000BEFB8CF23205FEAD781772608FCB5BEDEF
+:10C5300086787023CB4B9EFAF2B8762867AD0DE271
+:10C540007D993DE9EAAFB0BE85D597F56932BCCF9C
+:10C5500058B49ED6D3F29E60A81ACAEB3648284734
+:10C56000A7BD166E87F2B88DACBE7453CBAFE09DFD
+:10C57000B3753AEBFFF4F14E7CAF22D2C9FB57768C
+:10C580005743795D17EBFF478F5307BFBCFC48A4A7
+:10C590001D7E9FB895AD43D87D7339BDED919EF852
+:10C5A00015F6EB66FD6E38E44C66FE12B3E3E6F07A
+:10C5B0007DCE7D88EDD3F7DEC5B5010AF7EB0675B4
+:10C5C00007CA0D5B5339CAD1047E5AA5D45D00DF7A
+:10C5D000F9544E10C43BA5D34296B7DA43A75893FB
+:10C5E000CFEC2691EF0979E78B0CF85A93CFFC0832
+:10C5F000D12E2B83B0FCE407D9BBB3221F357A3F81
+:10C6000091207E007B44FD9B203F757E510BEAD339
+:10C61000F9E788BCD401FB2A3A6FE9977FBA289ED4
+:10C620005F7E4B3EB3938EF13C7AF17B63246803CB
+:10C63000FF640F100FBE03147D19EC963DF0BE9100
+:10C64000E11D923D4156D6F3F7DFDD459DDC1B6CC5
+:10C650002D761D94C05809DF55B9AC8F44D352874D
+:10C66000AF7FBE9D4459FE045BFFF5ED4ACF1683B4
+:10C670001DBF54888F59E351AFD4713C09B9B194AF
+:10C68000E38BF2F9E67CBAFE65CE16B41B9713A6CF
+:10C69000D76F24118C6FDC68E1F335EE3FBF65B3D3
+:10C6A000411CCDCCCF6BE972D8F9FAE0C3BFA3F03F
+:10C6B0006F7CC0E305FDBFB6D7DCAEF181978F304C
+:10C6C000FBCBCCEF8D82DF23667EA70605E3F7FB6D
+:10C6D000CFC3731B713FD0E51C7C4B27B1FD0EE926
+:10C6E0007D0BFFB9E0BE6031F8353696A7C8CB6246
+:10C6F000DE4FBB995ED6A95EE67E108ADC4FFB2F2B
+:10C70000C17CF852A147B99C11FC5CCAF5FC303DD4
+:10C710005E6BF577EE433E99CA4B56FD2DF4B6B8E5
+:10C720008748C745FD4DF5F5CB1A5D6F9FCD1D01BF
+:10C7300078C7F47604F9688A93CA6B1BE2EF00E0CD
+:10C740006F1AC75B3BD7EB09FD03F7FAB8FE01F59B
+:10C7500037F01C61B85F1035D9FBC3CE3112D8FF5A
+:10C76000437873517B2A05FC7DC2ECE23C32AA3C43
+:10C77000112AB7DFCC1F416F2BCFB0DF0777B8305E
+:10C78000BE20E2EC82FF5E2F6076F8B65CED3D9055
+:10C79000FFFD7CBE7E3E7EFFCDF3F1FCFBCF44C3AC
+:10C7A000F36FC867CA8F937F01E7DF1D8678697FC3
+:10C7B0007AFC38F8275CFE941610FCFEC9AF7D0A9F
+:10C7C000EB3FA6B038FBB164FE4D65E714FF3BD4E8
+:10C7D0009EC98F4CFE15EF911FCB30C7E7453B3FFD
+:10C7E000FFBEDFEA0C7518E2E181FB935A408FF936
+:10C7F0008B785EFC7A46C7279F4ADF617C272E50E4
+:10C8000050595A300DDA694A2EC4679E62FAA2D98D
+:10C810003EA0C0FB3E3E7F38A5C00FF79B88F604C4
+:10C820008C1318509650789FE4E7FE27F97B402739
+:10C830005DEC2BD6152858540AFD4EDE3C80726301
+:10C84000A8BC6800E542A02084F39E5C2AEA79F93E
+:10C850006E5626DCAFACE47C8271E33871E2E171A4
+:10C8600061F37B37EB94F8E7D5A4C0638AF7AED8C1
+:10C87000CFE2902B9DA4339FD65FBD3F1BFD8DC69D
+:10C88000547D02D0C3D78DE39E1CD387FBDA523987
+:10C8900038F6C1323C17C678D1DAFDCFA1FC5B2B4C
+:10C8A000F866AF996F66178CEE3CC51A671F053F97
+:10C8B000CD2F18C10E7A12F4972386875B787E53AA
+:10C8C0008DDC540D71A54F5713BC677BCB0B32D257
+:10C8D000D52D3F92F0DD0961C7ADE5704EB42FB89C
+:10C8E000A71030C815B8A71030F875704FC158861A
+:10C8F0007B0AC6F6704FC1580FF7148CF5704FC104
+:10C90000582E25D7B6439C6E5D17F14602ECDE82A9
+:10C91000B13FDC5B3096E1DE82B13FDC5B30963FBD
+:10C92000250C6E9F3E2463FC1FEE2F18FBDFF0C228
+:10C930008FCBA3B06D17CB536B7751F8031DEA5A19
+:10C94000DF240A9FD51C3E70BFC138EE07A9173DF2
+:10C950000FF859DD77FD42F85EB0EF26D3B8A49BFF
+:10C96000C9E316FA17E0783D09A5813F37850C1E0B
+:10C9700082784773445261DE1B1E30CBEDA1F74C29
+:10C9800022E6DFD71043FC37383CEEBFA5C0E343B7
+:10C99000BACA2379C6784F8C1EDC6A14E0F09AACD0
+:10C9A000C6A38752726E1AC6799E97218641FE48A9
+:10C9B0005AB6CF920CE703167824E598E9C21530F1
+:10C9C000D3454AB1992E3CAA992ED22ACC7491AE65
+:10C9D0009D37227C336BCD74B2466E42BE1770AE6B
+:10C9E000A07F01CE53E0854A802FDD27C48BADF0B8
+:10C9F0006DDCBFAD13ECFE3385EF9316F87E466613
+:10CA000055BB03585DE72C8FD93165CFB7E021B016
+:10CA1000357E2AE028EC081107A5FA1FEDE9985F9A
+:10CA2000CFFC3D6A1F1C2CC0F303E6E7012581DC27
+:10CA3000BC8E84513E5D67B10F6E70DFA7807D3084
+:10CA40006CBFD43283F70BADFB057B8B18E25256DB
+:10CA5000FB40DA2F453D9361BBFB859C0E7F89C669
+:10CA600090268D466EF47AB4FF02B9058EA2B3DC2F
+:10CA700014378E6BF7897508B888F993488B9C0337
+:10CA8000F45C6CB5CFCCFEB5F0C745BC5DC4B585D4
+:10CA90003F2DFC182B9CE57382ED40FF53BDC28FE8
+:10CAA000EEBB0A7E17FEB3D56F1DBA170090857BCB
+:10CAB000373C4E7FA77F9593BDCBC7F84EFCDEE990
+:10CAC0005B9C36523EE61DADE67B30741BDA88F780
+:10CAD0008A00645970EE4420A842B65E7A6800DE8F
+:10CAE000DAD97AD98B83CFD2EF96921F0C6C82BAA7
+:10CAF000535FCA00D7A1783E61F78415DE4F29E85D
+:10CB0000BC19F468B26A27EF1AE8C24935D5BBC52B
+:10CB10007C5ED0133943F5BF319EEBFFA3BE775146
+:10CB2000F8BC3B7E847A456D8C67D759E1259EC35E
+:10CB3000704DBAE838D8272E62D837EA4343598E69
+:10CB4000C10B55AB8CF7A644BD06EF977CDD7D018C
+:10CB5000DEDF7518CBD157DE7718D71F617905F660
+:10CB60001081FC5BC547EB8DFA65880E2943951B48
+:10CB7000F6378A7D01D380FBC9EC1286EFBFD5BEA4
+:10CB80003A2CF88271435967F5FAF4B37C7DD1B33E
+:10CB90001CBF64D1D90D3F6DD1D90D3FFD2C5F5F16
+:10CBA000F42CC72F597C76AF4F5B7C76E3573FCB95
+:10CBB000D7173DCBF14B969CDDF0D3969CDDF0D39F
+:10CBC000CFF2F545CF6EFCEA6807BA2BA204DE97D8
+:10CBD0000874103518A0262BFD19FCF92295609ECB
+:10CBE00006E17E4921F74BB66D6DA90717EA115D85
+:10CBF00009603C88FAF739B47E2261F58F742DC63E
+:10CC0000386BDB980979F05E95BBEBA2E3707F6F20
+:10CC1000A2CEFC71EBBF1BB64833FFFB6B9757648A
+:10CC20009ACAD3FACCEF575CD55864AA5F1E3EDF90
+:10CC3000F2EFE74D35FFBB64A19996F7206E26C64B
+:10CC40007B918524AA427CA5F06E5B159C9BD9C183
+:10CC500067BE90FEB753C17E1AFD6BF45F0AA92729
+:10CC600034347E10E0A698C6775BEACFF41EEAFE65
+:10CC7000B1F1EFA112786432CEBD736B1E26B1DF25
+:10CC800088F13981AF3B37DBD0E5FD6C2BC1771ED6
+:10CC9000AB23011BBE83CEF1763E273DB1EF48ABFF
+:10CCA000F93E7AA14EAA009F451DC406F1B5E04E9B
+:10CCB000A26A04E34248278FE8F1E9E411E2AD8279
+:10CCC00077B91E8910FC77B2045DDCE908E4C1B9CC
+:10CCD000DAF95D8C1E049D04804E52212FC8FAEEB5
+:10CCE00080155F644A94AEF591AD8519C67C54B247
+:10CCF0009BC1DD49FF8E84AFE29D667C0588A1FC67
+:10CD000015F0F5E9D7C497E20B45D37C10CF240189
+:10CD1000C8933A3866820DE011EC52D1FFAFA5CD31
+:10CD200000CEC12EF69E9AC093186F6B2B89CE331E
+:10CD3000F87F4135AA019C6BE44955907FBEA30C56
+:10CD400043C6C3F0B383789321EEBDA3CB968C6F1B
+:10CD500054EFA3782921E4BF372F4B2BA6F53D4193
+:10CD6000920CEF6CF5B4D9F0DDB29EA7A47AF3BBB8
+:10CD7000CAD1245B0EEE23C956815F3BFB6AFC4B94
+:10CD8000ECAC3E2A4379ECC661EF7EC8509F5E6BE7
+:10CD9000F97703892641FBE473581E679A667ECFB4
+:10CDA000C651619607148C7D39E5106FE1F4CEDF32
+:10CDB000498DD490C826BAEE73B8DCB1D251FA1DB1
+:10CDC0008B9198DAC67C03E5594F9B82F077707996
+:10CDD000453632BAD0E95FA0A7740B1D7954331DD4
+:10CDE00039E402CCC3157C25D623E66F1B93956CE2
+:10CDF000C775D9F13D6C87554E58D6E7866020C57A
+:10CE00009DDB4722115AEFD0197F10B91F7F774C55
+:10CE1000272433F815D6F935E553E89CBF8D7CF20D
+:10CE2000F031EF9CC6F6F999CADEB5AEEE60F4EECD
+:10CE3000D9CAE81D6E74B37C2D6D61AEE15C752FAF
+:10CE4000975356B879FAB46AA0E78BE49734C88F41
+:10CE5000B8FB3546FF6D630E3F0FE5AD7733F8073E
+:10CE60005586674A2F6A942EFDEE3BDC98173CB539
+:10CE70008CE20BF0FF92599E4CEB33C3B1C82237C2
+:10CE80008209E06AE5D74470FD96806B39856BD1E5
+:10CE900099C355D1997C4E9FC5DE593C384661FFF8
+:10CEA0003EAFCEE098AEA9287F2F924F45D368BB06
+:10CEB0006D1A9537749DB51A83B7779690E36678A7
+:10CEC0000AF922E05FC8E1EF55BD2FC0BFF3E2D6FB
+:10CED000ED2420017CFF5B033BA27B9A9037830407
+:10CEE000F096A631BA1570EE9ECDE05CA871387749
+:10CEF00071B8494402385BE9D52A9FD3BE269C7796
+:10CF00009DC3E3F159A4FCABC0795B0A7B47D931DF
+:10CF10008EC1D5E11E8C829CED0ADA715F07820A10
+:10CF2000D67795B0FAFB5356E680BEEDF277E60071
+:10CF30005DB605AFCF01F9EECAE1728668EEDCF2AC
+:10CF4000D8BD831A792BBE43DA1950103F9E407C1E
+:10CF5000F995362BECC47926D9898C7078488D07E1
+:10CF6000076799629297F98D66F8A658E0EBFA9AEE
+:10CF7000F2E1B5AF291FEE216CFD778E17EF347407
+:10CF80003B513F55DC8471F34C3ED7E685DF65BFEE
+:10CF900073BD66F8BDB610E489DBAE023C13ADBBD1
+:10CFA000A795F0F75A9CFCFD16F6AECB3678D785E0
+:10CFB00096BF03EFBA2401FDB3775DB6C0BB2EF474
+:10CFC000DB05EFBA9C0BF6B4865FF9D2427C7FF0AA
+:10CFD000B35A82F1F14D297F25F1E055D465D67F12
+:10CFE000413DD9F20E9B59CF65CCCB3395BDB3CC27
+:10CFF000EFB67954F66EDBFF0164680340008000F1
+:10D00000000000001F8B080000000000000BDD7D09
+:10D010000B7854C5D9F09C3D6737BBC966B3B9924C
+:10D0200040124E42081B0861810483829E84406343
+:10D030004D71435151A88D40314248285E1A7FF509
+:10D04000C94282841834A0585A2F2C378BB56AB441
+:10D0500051A922DD2052FAD5964551F152BFF55221
+:10D060002F40258A177C3E5BFF79DF99D93DE76425
+:10D0700013C0E2FFF8FDF1C1C99C993367E6BDBF5B
+:10D08000EFBC332184906FE8BF04CF0412F410FC8E
+:10D0900081BA433D9704EDD1FA23C3EB1C6A3A21D0
+:10D0A0005677A5E139F1F7115F22562D248390546C
+:10D0B000DE365DBED71E2E26644DCDAC24520CFD4F
+:10D0C000B450266D4F80469590D5566F968F3E4F43
+:10D0D000A85954435C84AC6A2124388A90F6163BE4
+:10D0E000962B726CDE601A2177BE2C7BE3E82B3620
+:10D0F000CDA7B969FFDE9C5B09A1CFD7B80919920A
+:10D10000479FBB9711924F88423F20D1BA5233E3D9
+:10D110002352425F98B3849049D1F9ACA9B1788386
+:10D12000A584C4253BBDF07D52ACBC13A66D6EFA40
+:10D13000DF37F4FD6FE0E782681947583BAE13BE56
+:10D14000A3EAEA04BE676C6F7E537A74AFAE7DAC1F
+:10D150009A98F63E2CF61C72CE37322DE579497539
+:10D160004E5A96A71092D5FF7B5FB69047F78E4434
+:10D170008012920E653D01782A7CCCD5C9B3ECC4EF
+:10D180001985B378BECACDE01B27D1CAE4FEE3B649
+:10D19000015CE3A2758510AD1BF0915D1AB3BF2849
+:10D1A0002906082923A4B32578F03D6BF4B9730A46
+:10D1B0007DDFD9BFFF4C55C679CF55552C9D4A9080
+:10D1C000B869BF442F7D5F0717A77666DFA73FA525
+:10D1D0006974BD2E4E37E477920278B5F37A8254A3
+:10D1E00037572D037CF9081941FB956BA4AE987D48
+:10D1F0004F13EF49502AE41D41DF79AC74D3760612
+:10D20000522869BBDDD8AE6620BC705C25FABEF63C
+:10D210008D34F0BCBFAB12F0F8CEC841DA6DDE7AC7
+:10D22000E0A77ECF558B80635F1A859BCCD71B030D
+:10D230008E6DC0DF028EB293C1B14DCADB19A6FC60
+:10D2400066D55C5E8A115291A676035FB6694EE49C
+:10D25000CBB6B4EE5025AD9F28B57861A8C49195A2
+:10D26000C88F6D43F71D5E08709DB9FFC36D08350B
+:10D270002D5425E04BDB133DD5A12A9DBC11F88A26
+:10D28000E7BF778C7D20BC9296A917CF236E4A2AE0
+:10D29000CE21362253BC384656D9EB9C51FCD8E0FF
+:10D2A00017FA3C3E6DC64732E5FB78AF0E8FF0EFC4
+:10D2B0001B564778D0C5DBB26FFDB904449119E91C
+:10D2C0007700E6A3A8BEE8FCC8D9C717C94E43BE7D
+:10D2D000278A3713E4657F7AF733BEE7FD06E60B4E
+:10D2E000D66FBA5C93791585CB9A17987C241E2645
+:10D2F000176C7686CF354463EDD98A97BE41D664E4
+:10D30000AE44F9D1AECE6F07F9F979A685C8123CC3
+:10D310005F6F07F9A198E447BACF62D00743E6C42C
+:10D320001BE4FE9A825928CF069A67569DF1FD614B
+:10D33000F5C6F77396A518EAE23D6BE6452F55A5AD
+:10D3400046EBAB943A3BC8915B33D74B753AFA1E28
+:10D350005254F73AD0ABA8DB3267E27B7139A53182
+:10D36000E7B5CFA3BD0572A25D65F326EED870BE0A
+:10D370008BEBA1BBB91E3AD53A37F2FEBFE6FDEF03
+:10D380006D716319C167C13506BCACCEA2F29A8E2D
+:10D3900007B0D77FFF29B5EE73985F14CF96287C2E
+:10D3A00080698B175B805FC5386D59F90EC0DBFA59
+:10D3B000EAC1E727F4AAE867557CC44BDFB312A3A0
+:10D3C0001CB7A5590CF89890C7E5C6B66B0CDFDD05
+:10D3D0009B3C63631EA5ABF587648274F73BE3FA5D
+:10D3E000FAD3AB711DEB33D9FA07A66FD3BAA944B0
+:10D3F00088D011D6534CF5A1A6FEF9A6F6D1A6F613
+:10D4000009A6FAB9A6FE95A6FA0F4DFD6799EA5747
+:10D4100098FACF37B52F36B52F37D5FF8FB17F2983
+:10D42000C3F3F5E2D920F205F4BAB9BFA268885F68
+:10D43000A1E7237CE536F2E30F722AB43C66671855
+:10D44000F02BE8F374F1B39ACAB810F093A23A50F3
+:10D4500099962F267A7A589F998FFAA38D4E0BF5BD
+:10D4600037B75F52041D5773FB70CE12031DF5E6EC
+:10D47000143AC07E24CE34944BA7A20B89A418DBA7
+:10D48000B5A1D1F67CF8FFD9A58B53D37180EBDD24
+:10D49000C1E72DE4C023C37DD7223E02D49E1E1BCC
+:10D4A00085931AB1A7E9C728DF6D49238138AAEF10
+:10D4B000B6F82D58FF3C937E08EC952AC687237852
+:10D4C0007F42C2128C23E6D3CEE9651DC8295ADEFD
+:10D4D00001728A96B7B56462B97AAD256B218C5713
+:10D4E00063433CA58EBBD5AF4059595E04FAFBB6E9
+:10D4F000B13B340BAD279E94497022B5174AAE2834
+:10D5000087E5244C9F9FB9173EF735FDCE24E04EAA
+:10D510008246C6E62A12B08E2364ED9EAC1F7AE8DE
+:10D52000B86A81E275405BB177859286FDFCE03692
+:10D53000A84ADFFE11B43EBCC082F685B5BCAF057B
+:10D54000EC7731EFB53FA4844B3BE6557B2D7E0A4B
+:10D550008215C3EB7E05701ADE492C1AADAB7E55E1
+:10D5600002B9F6469E8AF276EB1F28438E800FF5AD
+:10D5700065819EFD62AD6D25CC73603C11D952FE74
+:10D58000ED4B310EDA9943F1B906F4AC2A484274F6
+:10D59000951F76C13C9D32AB3F9777CCB7B2385AD6
+:10D5A0007F2CEF987B256DEF9C986B8175E4A5B976
+:10D5B000B4400CBA3A0CF218D6B776D170BD1E340E
+:10D5C000976A0D1D77082D8B7909B4760EC09F9749
+:10D5D0002A7F9EC9EA0738DCD466DE9EC6CAB3FD40
+:10D5E0001DF3F8AFE5B9855D3A94FB8FC5CE8C414C
+:10D5F000EDD3C37965FDED532AE886029D6FB27ABB
+:10D60000875AE8D89BD6DA889FF2D4A61C827EA2DD
+:10D610007F8D2DB01DF84351875EAAB3BB026B32DC
+:10D62000AED0E8FB0189CCD1CBC97B399CEFCA973E
+:10D63000707ED3E5637E99D2EF263F413B6B137139
+:10D640003BC01E89E0DBFFB90FE990E3BB2ABF6A4C
+:10D650001DD02959C8F4667E549EAD50E8389B61B0
+:10D660001C5ADFDC6EC1F96DDA45F9977EEAF39B4F
+:10D67000DFB180DD3C96042DB0BE312480A5872C1F
+:10D68000B30050BAB91EDFC6F9B790F237FA3B20A3
+:10D69000FA68FBA5C3EBBE06BE48222AD655BF1BBF
+:10D6A000E9A9715772652CFBC0966FE17E26A957D8
+:10D6B00026713F87C1D9965FD61FFE56B20CE17E18
+:10D6C00093C767CF07FF6EE7C1E030DAF4C4AB461B
+:10D6D000BA05A8CCD2C99D1CFE9D24AF4F93E93852
+:10D6E0007B72EB92E1FDC6FA4FF665C0D07E3FBE7D
+:10D6F0003F39DF8DFDAE08764F8761C679C395400F
+:10D700000B63AB7BF700C98CD136839B413CE53F73
+:10D71000DF93AAC23CEA86C23885A17005908FB318
+:10D72000FE603003E773BE05E86204CC87D3472D63
+:10D73000D2978A7422F00DF4504BEB573430F850E6
+:10D740008310DB89E236CC7FCB2A4A27CEFE749247
+:10D750009ACFEC236F148EC43AB87FE5CD8F41BFCA
+:10D76000022EB37ABC560817F87EE75E053ED0CC91
+:10D7700040DF5E077DDE9E5B770EACB374A3AF1512
+:10D78000E8CFB92BE4877E024ECE29214DC27EDA46
+:10D79000B9D06FD3CD9595A817BA08FA4B427F9AA6
+:10D7A000F16F9D62B4F708E9C2F58CEC32DAE994C6
+:10D7B0008E519FF7A3E39B23741CAF8F4B08FD137F
+:10D7C000E8B4C47BC0CFA0FE078E35801C7980EB07
+:10D7D0002541D7E27901891D67B8323FE2CF66CA99
+:10D7E00083C3FBCAFC18FEAC0BF86304F2CB7CC00D
+:10D7F000879BF461FBF09B8DFCD2B8F3937DC3E86B
+:10D80000FC9DA5EA04C08FF87E03C737A5E3C54891
+:10D81000C71BFBF6815E1B7E33A3E36BC1D6488F2B
+:10D82000D2E34D1E6D297C47D099793D4BF87ADAC9
+:10D83000737DD7C278576CEC7EDE81EFF9AE473E40
+:10D84000DB180A3A4814BEC3397CE36E89E0D90D6F
+:10D85000F263568DF779D0CF3E8F7B3A9433D5BEA5
+:10D8600036302DE6D6CB06BBCF8C5F4A5FAD485F26
+:10D87000C4374D92C09AEDB6A2FE1C806EA27AD338
+:10D880002FE8FEE653C8ED3B62E1E174C73F99EB38
+:10D89000BB1BDE4FA9F611E4D3D39DD769F61371F4
+:10D8A000B3A81D1BB0EBED5841F71DEDB3D04F16DB
+:10D8B0007810CF57B5CFAACE033A772ADE58FE4F5D
+:10D8C00044DF703ABF9FD3F97A6E7F7571FBEBF638
+:10D8D0001615E57B678B07CB8E162F8F879663B95E
+:10D8E000AA45C37EF29A4F2BD07FBF99605C6B65CF
+:10D8F0004289148BAEF2FC467B7F78B311EFA9D539
+:10D9000046FF3B596F2FD37F49E5F986F644EF6810
+:10D9100043FB69C48B0F00DDDBD22A0DFD48F813F1
+:10D92000837D2BE0385D9E87F1620A4FB4AB853D65
+:10D930002BDA09A9C378AED5E467769AECD80E80C5
+:10D9400023C297C1B10BE088F02DE7F0AC667E13DF
+:10D95000F77BE285DF53B47ECE7C8C8B1094572B03
+:10D96000726CA89F3BF298BDDD8F7E3275F293F208
+:10D97000FCEA354C9F0B7BFCF99C57AAC1AEDD92AB
+:10D98000694139B9256D8F672BD6E3BD4C9FFABB32
+:10D990003C147F560F8F57538ACDA2EB4DE47CB3D6
+:10D9A000DA4A30FEDD91EEF4421C2CD1B3A806FB1E
+:10D9B00099BE4BC8CF89DEFF23EFD51BEC0EA25CCE
+:10D9C00063586764FEA536368E44241827A5D866AA
+:10D9D000C09F9DE8EA79305F5B148F79B05E8E2737
+:10D9E000939D23E214663CB96B8CFA6675117BBF7C
+:10D9F00037E701C4BB19BEAE2A23FD7670BA684B67
+:10DA0000DF827C68EE6F1E9F4C8937F87F1D9EC1B8
+:10DA1000E324C29F16FDC08F76C7E86FF6A3CF86BA
+:10DA2000BFEEC6EF19F55D0C7F7DD2085D3C49C0A5
+:10DA30003B8207115FE47E98885B8BF114C2C6C3FA
+:10DA40003AC6B7FD28FF7E99E0423FB2C0690B801D
+:10DA50002C2CA0F3003A6EFB55426025ADAF4B98DD
+:10DA6000D99744EB05DB6415DB9DBEA11067EEDDA5
+:10DA7000306368987EF71EA9EEA211BA38DCB6E4CE
+:10DA80001B32993DA0BC13F600934BE8E7FAD74D43
+:10DA90000C69608F1711EF76025E306B17F444F457
+:10DAA00075B97FFDB3114CEF66CE25CBBA63E07F2D
+:10DAB0000D6F8FCA715F3CCA6B2EC70B38BCB6772F
+:10DAC000CD8AD7CB71DDF3A4587475B6E4771BC843
+:10DAD000EF51F09D1735D4DBA584CBEF47C8F75144
+:10DAE0007E2FCBAB5B3DA22CC67E9F1246F93D51EB
+:10DAF000D5DA01EFE9E0EF015E7E4AF112631DCF56
+:10DB00008E60F6CDF7152F42AF6EEF7A9CE1A558E7
+:10DB1000E0E57612CBFFFD1EE0E569807B3FBD4A64
+:10DB2000C2B80FFB45B6F60CB43FA56ABB007F1127
+:10DB3000FC5C169B6FFEF91DE3E77EEEB7AEE7F8DF
+:10DB4000E9E2F1F1DB397E3AB9BEEEE0F869E7FAD5
+:10DB5000FA56C04FDC99F3CDF066237E52ABE34D0D
+:10DB6000F830E227A9DC889F44AF113F099ED126F7
+:10DB70007C18F1935EA022FCE2328D78EAC737A7C9
+:10DB8000F057D2609C187672765DA802F6B886CE01
+:10DB9000E9EEB5C220BEAE0A28C57AEF35F9A5A2D6
+:10DBA0004C2F6078CD9C161BEF16DE1EC8D7A40242
+:10DBB0003D9DFC20361FDB79FF63AA1667E87F5185
+:10DBC000ECFE2EDEFFF5E15AA2BE3FFDB94B1EC4AE
+:10DBD0005F30AF3F41D2D20B701DEACE30C5FDB6EB
+:10DBE000156C1F729B43ED86FD7CFF0AA777BB8AED
+:10DBF00023F9ECE01FF171883F09C7CDE59F19EECD
+:10DC0000DCFF15ECFBE52DC81E7A356DCF5B9E79E8
+:10DC1000A48E96A30B46E03CF3EBBD7B00CEB26B2B
+:10DC2000CE50B67F3CCFFDFE184A6AC154E91B7046
+:10DC3000B8DDB1F7ED4529F42995836807D2890449
+:10DC4000B6533A8D5388929802EBD5705D56B06307
+:10DC500065586F17D6E34937964E1262FBD7DC1F23
+:10DC60003DAF200FC7731337FAAB29C48BA5E06310
+:10DC70007B1A51D227E0F86D7113082AFCF3C05FBC
+:10DC800075666FEE009F46A3509884AC82F090EECC
+:10DC9000DA87EB271EA2B278DBCD6ECC4FF8335D6E
+:10DCA000DF98D35FDFE9F6FBD2E12A21498434DB38
+:10DCB00059F98B78D71628BF74E4062068A58DA87B
+:10DCC000FB31E0D55F49D0FEF0BF951068C5C92E85
+:10DCD0003B87F907A73DCEBCB334CECFCED2388D2B
+:10DCE00005E9A71EE736F87532EC63FA9643FFB6EE
+:10DCF000E44968778AD20CD77D1EED06989F627F33
+:10DD000029F7BDD4A8DDE67C5342BBAD4D0A12888D
+:10DD100053FADF96D0BE22C50C4F4E9578F2C64519
+:10DD2000C7717A970D67F12E16EF59F1F75F8C02E4
+:10DD3000FBFB970933C349F4FDAD07A99D0779346F
+:10DD4000D3BCAFD7537A4A4FB579B750FA49E57E7D
+:10DD500072DCDA4907EAE9AF9F8C62FCBDA365BFBC
+:10DD6000BB8D0AA444C57BE104FA9E93EFDF12B990
+:10DD7000260C7663E22445853D8E2239580DF32525
+:10DD80004D16027C714F83713FB7B3B008E122EAB0
+:10DD9000C3F87E2E2955FA227936D48EDF58C0F387
+:10DDA0006A5CC40576A1F26F2D2956DE8328C5FC76
+:10DDB0004AD3A8DE4A82B820E5145A96760631F98D
+:10DDC000A3D21BB4831DBB2140FC360AA707E7FB87
+:10DDD000AE81F13ACB7D0960976F3834EBA2B17414
+:10DDE000DEA1B0E205100447A5E0BA439ABC368133
+:10DDF0003EDFF9A6C50DEBDBCADFEFF449C8FFF73C
+:10DE0000CC23013F85C7D6863D7619ECDE90858C04
+:10DE1000443B973A5C93B82854215ECBF8FE965168
+:10DE2000E9F8B027B43C19E0B22EE1FC9046C7AF48
+:10DE3000AD6671E71972F6F3306EA8D386F849E73C
+:10DE4000F94712A945FB39659ECE5EA6FF123B99A4
+:10DE50005F19BA8E60DE535299D3EBA7DF7B22CCD9
+:10DE6000F68DEEA96671671709E2F767C8BB1C1645
+:10DE7000FABCA75A71033D2599EC73278C4749AE2C
+:10DE800067231BCF359E8D9768CA83B28B79B9E91A
+:10DE9000BC28FEE44405F1ECAE36E64FB94CEF3950
+:10DEA0004DDF7B59E0399B14029E4FF86E98F812B3
+:10DEB000B67AD558F9139D2D2454A5CBB7700E1002
+:10DEC0003FFCB290F909B6ACBD7698D709DF2B6953
+:10DED00010EE7AE15FFBDEBB03CA7FFF574F135D95
+:10DEE000D75FBF3ABCED518063F36D2F221D72BF27
+:10DEF0006A084C81CEE7F95A1BC2B14C63F101525A
+:10DF0000DABBD75A8AEDB8AFB5768F03DB87959326
+:10DF10008083C27398A265FD0CF835247B57A83026
+:10DF200088E6CC9A44D85615ADAFBD92120E950F27
+:10DF3000E9F334D95F0CF190174822C5F7064D522A
+:10DF400059FE9BF43CF0534E95847E58CE219F039E
+:10DF5000E8E1C46C0BE6BFACA8BDF4C29174FCFB55
+:10DF60002A148C375457555C0EEDC30E317A715D0F
+:10DF7000C7F047E114ACA2FC30E2108B279492B0BA
+:10DF80003748DB877989350DF4C73C0A60985F27ED
+:10DF9000C70F8F0F949686FC00D444AF118F6E1379
+:10DFA0001ECD78758DA47804FD52448A985FC7EC25
+:10DFB000C75ADE6743D544F45FEF5189DF3AAE3F7D
+:10DFC000BE5EA4F6A346EDBF10B51FA1FC1BB51F96
+:10DFD000A1ECA1F62394895AC545A574BEA1743A53
+:10DFE0002EF05F4DD94AD81FB86FEAD537FD93960A
+:10DFF000657C9F8D726A4A25FDCE2CE062565FAF2C
+:10E00000519BE4A552D9505F9BA6887D3C3FE8D444
+:10E01000C42C0BDFE79971A746EB9D990ADFD76304
+:10E02000F511C5C450EFA9B118EAE7EDD18D3F0550
+:10E03000F01387F5092377AEF71744DBEF28A475B3
+:10E04000DA7E80DB73B54B2DBE2D31E877D948469B
+:10E05000BFCABF895FA2F8FAAC80A09F2E5B349440
+:10E06000DFA4505141BEF6D7CB540EEAFDEB022A95
+:10E070005775F191C3853CAEEEAB60713612FDF978
+:10E080007A12CFB322F0BC330476C4ADAF5EE90D93
+:10E090009281E5AE355339A2A7938B051D8C2423BD
+:10E0A000D19F27530E54009D754D54801E4A391F31
+:10E0B000106EC761889FD2CF539FDEFD174D053F7D
+:10E0C000ADDDDD3612F37E2E1FA9CB935995BE68C8
+:10E0D00022E83391F7434895FB7DBA2EC97FA90505
+:10E0E000ECB681ED1485BCAF83476FED8C24D00373
+:10E0F0004E2EC7CDFD57B5EC7C05BEBFBAA51B4B58
+:10E10000679A0F858C5DF163FC669FA7AE11E6658B
+:10E11000CFA6ED3A396C4BA3EF19FC806C667709FA
+:10E120003CB809C683C4BEC986CE09F17114189DD6
+:10E13000545F807CDE109A8579159DDE0983C6AF19
+:10E140004EC5275BAB5E2269148E4FBE3AF32FB3E8
+:10E15000697910F88DEAC12738DFE4943FF6DAB523
+:10E16000067E396AE297A3267E397A0A7EB9E04EA6
+:10E1700068EFC9540CF51CE0175D7D6B845F583D5A
+:10E18000CA2F47915FEE79D986F58D238F1AF865EE
+:10E190004521AD67EBF865BAECDB12C30E78E53BC1
+:10E1A000E2975F9F29BFBC7166FCF2C4D9E3973F39
+:10E1B0008E4CFFEEF8C5779AFCE2EBCF2F87605EBE
+:10E1C00067CA2F9DEE20E60376CEB6540762E0FBC9
+:10E1D0007A8E6F11F72EE3718A69F3B4CBC7823D53
+:10E1E000CBF3D6443E4DE73CA6BF57D4CE407DB9D5
+:10E1F000F520D397423F97713CFE8DC731CA424C00
+:10E200006FA6974BF8FE4C4D0AA8F4D74E6A12A49D
+:10E2100082BE9E22912E1596BAAC76A414B59BE8C8
+:10E22000F7D06EBACFCBF266C92166EFD8E97F404E
+:10E230004F17975B0D7A7588D9FE32D5C53EA6D8A3
+:10E24000BFBC0FF212283CBE1EC9ED2693BE15704E
+:10E25000D870A812ED90CFB36D83EE5775F2F546E6
+:10E26000ECA9525F45AC78587DA184F0BEC9A3C526
+:10E270001796813EBE0AF5AED0E766BDDC53F59237
+:10E2800051CEF8C7A75616EBE48C7F3CEACD889CAC
+:10E29000E1F501E50C3907E546442FF37A442FF305
+:10E2A0007A442FF37A44CEC0F8D951BD3CF281F1C3
+:10E2B00077FA757A7B19D4B34FAD9717707970B62A
+:10E2C000E5CC1FB8BDFA5DE9E5CA424E2FFFB99C07
+:10E2D000A929FC0EE54C2DC899A453CB995A90332B
+:10E2E000C506397355E1B7D0CB890DBD7ED8BFBF08
+:10E2F0006200BA77707C371568D7C0F8A4E6F4F2EC
+:10E30000B6CD74D55BFBC0AA0CA0172FF3F3067A29
+:10E310003FB1F9F7AFB4E9F2A21395103B5FD1FC1E
+:10E32000243E9FDB7010E365A79A6F7D21C1D2ACBC
+:10E33000477B6BF7D9916EBD16DC13FFB6F3E89CF3
+:10E34000CDF8F28DED4FAF073EBA8FC7FDCC76AE5C
+:10E35000C0EBE9DA3FE6EF5E3F52C571CDDF3F1516
+:10E36000DD523ADD0C747A22FBBA31E0E7C98977D5
+:10E370002500BCBE07FAF0C96F43A7AF8C64F83C18
+:10E380008D750761FCEF6ADDFF017FBEFC6DD6BDB8
+:10E39000A090D1D569ACFBBFBF4B7CFF07FEC26725
+:10E3A000DF66DDCB04BE093B2FE3865F289FACFF11
+:10E3B00057E1DB10BF58FFEFD18FC13ABBBEB26F40
+:10E3C00086F805F9FA1BD9AD3F3F45D8B99944FE07
+:10E3D0005EA28F9D877157EBCE4791E879295C0F3C
+:10E3E000C63722ED07629D97FBAE4BB047DEB10EFC
+:10E3F000D26E63713BF3F3FF2E90D83936A9D60164
+:10E4000079F1BDB3F760BE41E7EC09B86F65B6536B
+:10E41000C47B3D2D1AC6933A5B7C58DEDE521D82CA
+:10E42000B8C9932FBD25413E58E94B0DA8DFD64E04
+:10E43000FAE130CCE39B5A1A0FF5DB4D768A8BDB81
+:10E4400029DE51AFDFA9F75F9EFC4D13CA4111874A
+:10E45000BA2362BFD0F7549D9F44EB400E113F0991
+:10E46000EA063F69D97AB05F7AC07EA1FDA78E5ACD
+:10E47000B63ED677D65A483DD82F6B1B2CD5B1EC7B
+:10E480009770416CFB85D671DFCD91680FACCC03E2
+:10E490007B86D4E9E36AA7B25F1E1EF5DDFA495711
+:10E4A0008C3A3B7E52846FB9DD32A4485B0821D997
+:10E4B000B32527869DA69C18D65F4EDC38EA5BF80C
+:10E4C00049E102965F2DE86BABEAC578726735C10A
+:10E4D000F8636768656A09AD3FD1602112AD5FFFDF
+:10E4E000328B0B6F2827013847BB219B603DE465C9
+:10E4F00074304376FE08E2E03D55D47F52216EF73A
+:10E50000E35A80EDBA8499B73928BDD4962B04FC20
+:10E51000A619F214FC4E4863F9A1B54EF2A338F0E7
+:10E52000ABA62A64E519C4AD13E562897224E54FF0
+:10E530003519F876A078B439FE4CE417BC802F73F7
+:10E540001CFA4CE3CFDB055D7DFBF833F2DF970F60
+:10E5500034CD8278EEA9E871C12815F599594F9903
+:10E56000F958D0D340F4E7043B69A2AECECFE186A0
+:10E57000F93EB513ECA48951BAE8AD9D94142BFF74
+:10E580004A9409CD7F78457F1E2F41E9C6F1129A42
+:10E5900077E1F3BB206F00D6A778519E3E5849E53E
+:10E5A000708CF9ED6E597608E4E7AE96662C2F5024
+:10E5B000FAE414DAFFE916FF2180DBCE96762C9F71
+:10E5C0006CE9C2F69E968D58DED112C0726DCB0EEC
+:10E5D0002C6F6BE9C6F2C17CF69D294A10C7B9E0E1
+:10E5E000241D5F474753FBE87774F83EEF43BFA114
+:10E5F0007D72B8DDD07ECEE12E43BD2CB4D1D0DF0C
+:10E600003D2560686F2AA83B067CE92ADD6178EE2B
+:10E610002CEE36BC77BA7EC1D9EE976B7F04B6C9B3
+:10E6200049329CBBA0AFC8706E88F2F190662A5E3A
+:10E6300069FDFE441EE7E866FBE49924F283740951
+:10E64000A964601FF426B23CC8D62CF67EEB8DACD4
+:10E650007E7F0EDB3F12799AB23D42D744CA88EEE4
+:10E66000E7DF9FC8CF2915B0BCC8DCE200442448CE
+:10E670002E24A8C17E4829DB2713FBDEAD3CEE70BB
+:10E68000BF95EC94A83DD9AAB0F9B76A24B082F638
+:10E690006B2D66F57BAA48C002F3D7A814CFD0ED46
+:10E6A0007337EFFB4A2A89EE9793D11AEED7C87CCD
+:10E6B0009F3DB2EFED7897E0BE3E87D7CA848F3199
+:10E6C0008F36B9B94F02FE1AD2DCD70BF3BBFF1657
+:10E6D0009B1ACB1FEABDE58B2CE09B4D377E910545
+:10E6E000CCBE29923FD3E7D0E7CFE472B86C6ACEB4
+:10E6F000C7FC854DF52E2F87B3C5D48EF90C9FD757
+:10E70000F3FB0988827ED1307714AE01913F22431A
+:10E71000DE1D5DFF88E8F9D3FF34BF6653F37296C0
+:10E720005F934D787ECD4CF427051E364139AEFF00
+:10E73000B9DEEF3ABFE6947935A63C0703FD42DD2A
+:10E740006FA66F15F112C7E95BBA99E5456499E8C0
+:10E7500046E45D08BA14F919225F43E46FD8785E85
+:10E7600007FD2CCF6B8E4D5FB63DC403E7DE644BD7
+:10E77000BC774BDEA9F3089A3DF95C392C1BC7C660
+:10E7800065F903FF334AFB85A72C3A6E9E47BB51C0
+:10E790005F17E556F875321DC21BAE027BB5A85C4B
+:10E7A0006B85F37C29A504CFE994964B58161D621E
+:10E7B000F5DB3C327EAFCDC3E24DA27EB1A63D0774
+:10E7C000EF2799DEBB38F29E15FBFDDE63E1A5C2A3
+:10E7D000E6CDF3906772FA5E3D5966F9D155129312
+:10E7E0001BB0A13A89EB430ABF8B89FB92025DDC27
+:10E7F000F5C71C5BB7B7B0FC3E910FFDB79765CC72
+:10E80000877696FBA6C1D9B3B2502808FBEBA5DBEF
+:10E81000883B4585F98535E0C7153977EF817C88D8
+:10E82000272E647BB6171F62F6C28FCBAFC6FB469E
+:10E830005C5FCB188F754F49F406E0433556A6FF51
+:10E84000453E74B9D15EA835D90B179FE2FE8F14EF
+:10E85000D2E7073DF988C7148FE5F7800C24BFA3E2
+:10E86000F78030F950CAC77496BB1D10BF2E3A64AA
+:10E87000C1E39EF2364DC6F3B19D2CCFE389906F74
+:10E88000D0F3A82F723886B89CF81BCF93ECE172B6
+:10E89000E2752E270E839CA0E52B3C4FF210CF9300
+:10E8A000349F97D8D152FD92DEDE319745927F1684
+:10E8B000E6416D56089EBF1BE0BE8FA2001DC790AB
+:10E8C000C7B802E9676FF2DD15401CEB350BDA952E
+:10E8D0005D5348562CFFAEEBC2CA41F30F3B5BE6DB
+:10E8E000BCD43688DFE8B4517F26D6FB1E71AEABB0
+:10E8F0000BCF5BA4955B08E45565D9FBD8FE43AF0D
+:10E9000003E97988D78EFBFB649E93BCABCB53B9EC
+:10E91000DDD7350BE6FFE03605CFE7887113BD7410
+:10E920003E3A3A499BB22713E6DF39359809F64C4F
+:10E93000D7F87D1B0B205FE4A04C800CCCF3B21603
+:10E94000717F96AF2B4DD1A45879EA03ADEB038FBD
+:10E9500064B867C20CFF01ED0EC80818FCBC95B383
+:10E960002846FEE269CC13EDDB6F765C3B1BCF4D96
+:10E970009EE6FD17099C0EB3161207FADD408F8341
+:10E98000E0D9650D21DED62EB454C73A5F5B54C47E
+:10E99000F0BDB6F453B48B4971EC7924959BE9959D
+:10E9A000CDE70E858E4FDFEB2A8D3DFEE51C6F9483
+:10E9B000AE5F0379D5556D41BB22092E62C0FC1CA8
+:10E9C0006A074948EF28973E2BB5313BC1242FFAFF
+:10E9D0007DBF54474FF9FDE5D0F9454E437CFF44D8
+:10E9E000F6ECA4600C3C8B52C051C8A1FE70247898
+:10E9F000FEB58BC39114C7E6EB28BE56887855DD6B
+:10EA000029CEEBCD2E2A8B714E6C003C98E9E18E1D
+:10EA1000853E5C1779EE35A282BE2CA5FCA88B43FF
+:10EA20000C043F33BC167EC7F032B7FFA888C74737
+:10EA30004E739DA7DD8FDA456E9D5D0C87A2155A3A
+:10EA40009FCAEB3FF64BE17BA85C9576FD09ED9EF6
+:10EA5000A9BCFC3194543FEE9282EFBE415F9E22EE
+:10EA6000A93980B4594F8F820819B9555A66B07FB9
+:10EA70003A24EFE167302ED4970AFDA6933A852118
+:10EA80003980EBFA93146E05857529D15641D94822
+:10EA9000BA6CF05E63CF9F0EC3771A7B1C4119825C
+:10EAA000933BADC7F471A36BF4E747F2E0168D6EAC
+:10EAB0005B1E9DCF921DC67DD20612C2F196761BBB
+:10EAC0009F9BCF8F4832050C5C4E10C97F9D82F909
+:10EAD000BDC4C1DAE3478BF3E87D85FAFBCCEA39A4
+:10EAE000BCEAEDCE20DC2F4402C6798A7B739EA758
+:10EAF00072CC3E01CFC33C0C74FC91DBEEB7507B73
+:10EB00003923A5AE11E07115516DAC647683589729
+:10EB1000B887668173B60DE0BBA0DDBC0ECD06F3F1
+:10EB2000F959D7E0EB1378FF4711C175DC5EA46299
+:10EB3000B934BE66BF06CDA5A15CFD7D104D5C3F1E
+:10EB40009065A906FE7D51D023D1E4D3597F7FB8CB
+:10EB500016609C4CC075603A35C6C976C121D77421
+:10EB600084DFCB7AF811A5AE04C615EBF96759E836
+:10EB70008120ECAB26B27BA0DE4DA97B03FAE71C1B
+:10EB80000EBF2FD1A913A75A08EBFC78E747AFC8EF
+:10EB9000F9D1F51112BE1BF2A3EB77CAEE0E58CFD6
+:10EBA000CEE70E03BD0FB42E911F4BE901E146E7FE
+:10EBB000F521E837F3BC8EDE407E0A76C974B9D8F9
+:10EBC00010477986C3F19E62DFC7F05EE94BD92E0C
+:10EBD000BC7F27BF7BDF503A8FBEEB25CCAB4D937C
+:10EBE0004915C04FE4237CEA54D0CF4E4BF0CB2ED6
+:10EBF0005AEFBB8A78B7C034BCCBBC402A724EB146
+:10EC0000B783D24DC6F5B20FE4C9DFAF5B90BC80CD
+:10EC10009619890B9347D0F28238E277D0F13224EB
+:10EC20008BAF1B8350F3932FA1F3FC491C9D27ADA1
+:10EC3000E7DD90101C41F9ED8F3662077A4D4BA845
+:10EC40005B371DBE932CE37C8E503B51A172ACE22E
+:10EC5000F2CF26DAE9F7867EED9C00F3C96A9E467C
+:10EC6000DEA5A03C5CC4F8E4E8C35F4E8473E0F228
+:10EC7000374E2F9E33E7F4973682C1C38CEFDD1CED
+:10EC80001E6FC6337FA731DD762BC4DB3FE6FE0F58
+:10EC9000D13CE82F5CC7FD8537E3991FF466A18856
+:10ECA0002F05D3F5F66DA3434BBA0C9C076A274199
+:10ECB000BEF3676E2D2919FA111FF2ED75DC6FFE98
+:10ECC00098906AA0F3EBD64C1B9242DF4F6F6570B1
+:10ECD00030CF6FEC68A69F1B4E5282D6C5CF1A94D8
+:10ECE000A00DE477C3499BE1F9DFA91DEDD79D573E
+:10ECF000FFC98787A6C3FCAE24E155D0FFCAEB123B
+:10ED000058E09EF36B0F9FC74070694C568842E1F4
+:10ED1000D12811DF60FD9EF9B71C13BEB34733FB4A
+:10ED2000257D5AECF55DC4D7376D75CD2F81CE1A90
+:10ED30004356B4E5AFFB43C590C1ECE7C693E791FA
+:10ED4000802EFED7A884111E8D27CFC7E7D3561F6C
+:10ED5000B301DDC3382A7D7E9D431B02F1DA81E0D9
+:10ED6000BC9BDB418D2793893F55FF9CF17774FC59
+:10ED7000346CFF2D87DB6FF75BAA63E577358F6611
+:10ED800070199DAEF8201F684C90689B637C57F407
+:10ED9000CB4831EE5F98E7D55319BE12E67D4E158C
+:10EDA000D1627D6F3187A3986F4F4A78910FE9B395
+:10EDB000AF10EE9988D4DD7DB9FA7B24B672FCF5EC
+:10EDC000FC309C0BE37F7C61EC733B02CF9394653A
+:10EDD000682FBF9052F734C8B77997D10AA58F2111
+:10EDE000F38216763EC53F28BEA370964960E26066
+:10EDF00070B661BB18EFA317393F523F1CF2D4AF76
+:10EE0000E2F2FFAA6D4B30EF49C8A98F36CA28A796
+:10EE10003E42DD42CB8084F6EBFC3A0A6B2A571661
+:10EE20006D9FB60FD4C15599D4064D61CF6F86B290
+:10EE3000CD6A88F78BEF2D38CCECB7859D463D57D2
+:10EE40004F3A3F01FBE0A317993CA0FC6D0379BC4E
+:10EE5000E82EE338F5DB2EFA00E6576FF2CB33B835
+:10EE60007E36DB799B47F3F8FE2432E94CFCF24610
+:10EE7000A2ED188D7AC127C33CCA14E33D5BA24CB6
+:10EE80002F61F05FBEFD84CDA50E3CEE112A470A2E
+:10EE9000E8B8C7A83F0EE51F476BBF1F4DF170FCD8
+:10EEA0002083CB81D1754FC1F78E1F64EBFFB4E196
+:10EEB000D345704F0C99C3EC8638387C407F8D9BCE
+:10EEC0006B0FB4D2F5AEA662CA01E782E2983D228A
+:10EED000EC3059BE5676D1F6C9FF58980CEB4C7BF6
+:10EEE000E807D5305EFA43091AC0ADA3421B0FF202
+:10EEF000BEA3D6E985F32A9B291996D3F7ED741C96
+:10EF0000D02781DF4EDE03DB9105DDEB2AE1DE1742
+:10EF1000F7AEDEE030BAAE760BBB27A3FD7CE26D28
+:10EF200025D1EF35EDAA7D0CE6953B9BEA0709CE8E
+:10EF3000D16BE3DDBAF109B7AF1A394E8E3F3BEA28
+:10EF40008EF3E05CC27E19CDC74F1BF2D1AF1F4DCF
+:10EF5000183D89FC7BF836D891027EC7A8BE22BA3C
+:10EF60003CB5D1DD52D04AD7B5B4E731BC8FA361EF
+:10EF70006530632EE8DB0715A647F9FCD2FE9855ED
+:10EF8000A9BAA2FA77AEE4463B52D8C99713F15317
+:10EF90008CF1C2399C0F2EE7F6F1DC0406E7F9C4C8
+:10EFA0009B0BEF5D61272E0B85D9DC69DD65CB40BE
+:10EFB000EF2EB126837D036B898577519AED20C1B1
+:10EFC000878D0F24FA21EEFAB1D45708831CB13291
+:10EFD0003EEB7B362EB025AFFF38D631CCAF6F2C51
+:10EFE000E4765D01D1E0FC40E3EE51781E2C2E9ECC
+:10EFF000E27102CA3F3BE0F579D0FF74DDD73CE314
+:10F0000008E2B930715F999BF813E9779A760FD9C6
+:10F01000027646DA086DFC723ADEC7D6702ECA0B4D
+:10F020002ADF24AA5B73C7ACB944A17CD53894DA33
+:10F030005DB47ED14377B37A7E789185D6AF7DE893
+:10F04000D14B144A9F8DA3C3EF43FD96879E66F56F
+:10F0500009E14532AD6F7C683FEB0F7BD894B0B6C9
+:10F060003F74E012F0FF8F2433FB8178C35702FD19
+:10F07000343E3DCAD2A15BEFBA314C3E1E71B07E28
+:10F0800047F2C84F6701BC3DE1C259BA7DB9EBC731
+:10F09000083B96D971629DE23D92197BFCB1639861
+:10F0A0001EBD661AEB7741026977B0F3757EB0C773
+:10F0B000F6EE1A8570491993C2E145C7298D8E2352
+:10F0C000E028C613DF5D0C7A1DE4BE95CA7D9D9CC9
+:10F0D0003997E38D7EA70DBF53AC8D877BAC1A6744
+:10F0E000658F07BC517C291C5F8A1D2F57DBCCE63E
+:10F0F00047C74D2E413D3311E2CA7BBFA6FDF3A2A7
+:10F10000F336D3C78C314C1E5DD3CACEF7F7258FAB
+:10F11000403ABA2081D98BA494C28FCAB38D1C6E99
+:10F12000EBC624333F32828721128EDFCAE197CDAE
+:10F13000FA9FE97AE7F0799CEDF5EAF0A4417C6565
+:10F14000EFCE22C4D3C6081DAC338C736485E9BDF1
+:10F1500072CA78308F9411F8DE6A07B1E373B22572
+:10F16000F25E1E7DEF82697D13811F96727B98F897
+:10F17000CFC7BC86062E2D96B6876C10975EDACD6B
+:10F18000E2E4A480AE0FE863564D295F9F9BAFCFAA
+:10F19000CDD61730D02739D4973B3BB13FDD46E081
+:10F1A0001E19AF78021FCFC0CFB1C603BE18081F0B
+:10F1B0001D671B1F629E267846E06C9A9F8027F091
+:10F1C00031BE576CE42731CF5BC644E2B1467ECEF8
+:10F1D000FB96DFAB60EF2DBD91E211EC1FD548CF60
+:10F1E0004B7BF22CF38BA3EFB577AFF0819C4F9064
+:10F1F000541607EFA9F583FE6BDA558171AAA54F66
+:10F200003DFCA49FBEBFF8D10D2E48AEFA48E9CA16
+:10F21000003BB861FB2A17DC33F7A1E27781FCFCE5
+:10F220002820C7CC5B7F9BCB01617735727D73E46F
+:10F23000B7B7CD04787CB1DD8AE70C9B76C405E3D3
+:10F24000306E720DDA63B4FE36ABAFFE04FCD8A6A6
+:10F250009D46FB69F16F3664A8484FFE6116DC04D9
+:10F260000B0E83CDB0C66D56DC4F693C247BE9673D
+:10F270004813E9BB15E6677E1FE67192E2BDA95B04
+:10F28000BE0AF2FBCCED5492A03DD6D4731BDA69D2
+:10F290004D3D177E00764593299FA27E003BECC52D
+:10F2A00031DC0EE3F7A40BF890403ADA37AD0FFEED
+:10F2B000B2E46D3AAF63DBFEE2928AF57A7325E23F
+:10F2C000E9D3EE059B9E5607D6AF1F837D10A77F1F
+:10F2D0008FE157DD29B18DA15DAC6CB0065D101FCB
+:10F2E00068D86CF5520D4C1A1EDEFAC0AFC1BF7C57
+:10F2F0002DCE0BA9A64B1E7EFE9573697DC963D6E4
+:10F30000B41A367D27EC730B3C41CE06D829022F68
+:10F310008B7FFFBC0DE290F01CEC5E819F258FF58A
+:10F32000DAE09C9F198ED3BA7B6D980F6BC653F7AA
+:10F33000DB33C004697DF04B1BD0F747BB25BCF71E
+:10F34000DEFC7EFDE6E75D40870027F04305BE2238
+:10F35000F8EB87B7E0CCA74BB11FC6434E85BFC7BC
+:10F3600001476548E78F3C0D7194D7E3BC0087FAED
+:10F3700047AE75C17A3E5096317ABF6F5506DC971D
+:10F38000576FF567B8B164CFEBEFBF1EE9F0EA83C2
+:10F39000D767B07B24B42C768FA63F0BD6F9B37B0E
+:10F3A0002FC1752E22754887F5F7B1F8C6E70AA96F
+:10F3B0007E2C06BFCC2D66FCF2C19638480E221F6B
+:10F3C000C03E02EC9BBC28E3B9FB7EF72291E558D6
+:10F3D000FF9CC717C61547EEEDB3837DD7C47B35B9
+:10F3E0006D5B1D023C1DC9D186403C9FC2C1CFE16F
+:10F3F00026C1BDEFF2C1E943189E880AFB21F81E21
+:10F40000B5C7A7C173E81FB26A8E12C37BFC7E1B0F
+:10F41000F67D11DFA0F38E87FDF40F32585E9E79E2
+:10F420007D1DC5421E9010D1D3D940FCBF6D0DD2B9
+:10F43000D7678718FF34066AABB13D640D0E81F6BD
+:10F4400040EF6C09E5439C61FF3C421FDBAC9CBF75
+:10F450008DED749E8AA487EF6E09EFD314F4B2E8A1
+:10F46000AE38C37E7D947E8CF745097E157ED6D559
+:10F470005C1E98D76D960F97169BFE8EC2BDE9A7AE
+:10F4800015FF6EB0061EF835F033E55FBF0AFC6C61
+:10F49000C5F8C0D1DF3DF7CA1594EE8F760B3E3626
+:10F4A000CA5B331FD73F5E4662F1F151A797C4E4B0
+:10F4B00063FA3C261F3BD9B9E9FF57F2F6EA01E4AB
+:10F4C000ADBFD8286F3F27C549E711D0334BF0BEF9
+:10F4D00057337C85DF6B96A399C56A4C394A7F0EFA
+:10F4E000111D3C051C057D2E7E68297E2742C782A2
+:10F4F0004E051D47E8D4BC6E233CCDED5530775DFD
+:10F50000FE837525F563C0CE7D560E6CA1533B4E30
+:10F51000E7722B85FFF1DFE561BED12AEE071C778C
+:10F52000F7B9207F6C15F73BFA202E99147DDEE7A2
+:10F5300060F6D2715F9F2B596737BDBD4B76819DB9
+:10F54000170E90EA58F1242AB1711E6132503BDB4C
+:10F55000173BCEE3A1C779BC73BAECCC6D8638708B
+:10F5600017BBD77FE18ACB5CB02F707CD7883B80FC
+:10F57000FF7EF66799DDEBE9D714C89358C0404089
+:10F580003E24FEBBA7D0752ED8B504F31BCC7194D6
+:10F5900045CE6DB8BFF039B9194B73FC6431C4590D
+:10F5A00080DEEF353DDF7511D2D762137DD5017D49
+:10F5B00065F5A7AF1704BF8E27E3F5E7CF9673B9BC
+:10F5C000375D2EBE03EC99E3D4CFC75C02B9F800D7
+:10F5D000E8DDCFC1EF07C6F0A723DD2EA9FBD0C61B
+:10F5E000EF71467A177468F6F7CDE5B127FE3EE96C
+:10F5F00026DAA5E1C9374AEEA1E5B1275F2B7C06E3
+:10F60000EA4FBD9AFB06E9DF7FDAEEAFD0BF39BE25
+:10F610003B0EE7737CF79F726F82FAD37198877500
+:10F620007C651CE645F9772706E03CDFF11C16B740
+:10F630006B7DF6CB12CCBF206D88C793C536668F25
+:10F64000ECFA9FB7207FFAD35D712AC4299A7627F6
+:10F65000A0DFDEF4B403F35E8E3FFBE5247D9CE97E
+:10F660003F5D4FA38DC5338F2792398F033D2733DD
+:10F67000FFAEE999C95B215F6E694FAF0DF607A632
+:10F68000FDF15F2520978E3FCEEC0FEACFDF0F37DD
+:10F690001DCA639BEEB652787F0C3622F5C3378DB8
+:10F6A000EDBE14FCF0FE706170384EE100EBA2700C
+:10F6B000A907793A103C868EB521FD7FFFE0F1095C
+:10F6C000FA170DBBCE413E8AC245D2D8F3C4805D45
+:10F6D000C2F5B3E7BBBF2C017BEA68F70AB40B4E57
+:10F6E000B5EEC963BFAF74F06DD72D054F67DD73FD
+:10F6F000BEB7F866F4FF16D757663EE84FE74FDD12
+:10F7000080F54712BD38DFD3E4FFE6FFDFF0FEB837
+:10F7100084FBF2A7C2FB2FFFD7E2FDCF1CEF896E5F
+:10F72000C82F3BFEECBF72896EFDA75AF793FF4BC3
+:10F73000D71DB18F649F1DAEB8EF24C1109C5F5FD1
+:10F7400035809DF2EE5849E4EFA01F22F277E4B431
+:10F75000C56867C8691D6837AC22EC1E64BF6AE1E2
+:10F76000F7B1B1BCEFF66C6F00E3A28AAF7E33ADA8
+:10F770005B8737783B7004A37F2667D454439CA5EE
+:10F7800075059D171DA735DDE26E55E19A764B3064
+:10F79000AE04CBB7A15C9DF1C3FDF05DC569BCAF04
+:10F7A000D669F237E20B6CC6BC62B2C70DFBD50E50
+:10F7B000AF0277B95353D678BF6DEF58B6AF1D4F30
+:10F7C0000298B779A6704A2D191C4E66F808B8F54C
+:10F7D0008313F747C57DFC4A5A4708F85021D49F48
+:10F7E00064EB413F14FE8E14ECD7589316793BD846
+:10F7F0007E8A1AB9C71FF220B8BF19B96756B5A0DB
+:10F800005F2AE0AC1B0FD76F86F399C257E0C54162
+:10F8100066219E1DD94E6F80CE7F95CAE0BE8AC2FA
+:10F820001DEE1717F0157033E3E17DA0519D1D1FEC
+:10F830002D8DF93AFE4AE2817D96E9F294B01FECF3
+:10F84000E5F204B4978F49242851FFED5845462529
+:10F85000F815C7726C0A9453FBE89A74F3BDE0A4E0
+:10F860003DF237F4A05E41920DF5633985F8FE3420
+:10F870007B96E1BD0390B74DFDF66359E576DC0F4D
+:10F8800075E719DE9B99E0DA02ED07208F1BBF3F79
+:10F8900003FD9B1F641619C699F9CEB17BAFA2E593
+:10F8A0004EEE57F74DB5623CFED89FE755021C2F30
+:10F8B00054C71BFA1F24EE74202ABABE2A58DF450B
+:10F8C0009EC986EF36BCBDA710E2103FF256189EC7
+:10F8D0005F5C7EA1611C9F3D1C04F2AED56A0DCF1A
+:10F8E0001B9ABF204A2A21E7357F4D9489D47C0F8B
+:10F8F000761BC699B87FA7A1BF37E49E0626E3848E
+:10F90000C3DEE7A014F9ECB654BBDF42CBB16F57AE
+:10F91000CAB0EF59F65E5D2B84A1CF3B463C400751
+:10F92000E79078DC0F1C28EFFD4B4BA00ED6F90BAF
+:10F9300039E081327ED8A21258D747999D326C4B5C
+:10F94000DF23D55D5E0276D6678156A85FF075B776
+:10F950000CFE64EB0E19CFD74D976B12FE0AF2B86E
+:10F960005BC21CFF06A705E3F04753BA4BAED5D1E7
+:10F970009DC8DB31F371D1C48A25307E5BA6D6D514
+:10F980000BF2B4F2EF57CA31CEBB12B7F15EBAA296
+:10F9900089BEDB619F5EE425C54F935972FB0FACB6
+:10F9A000182FB9D5E27570A1807AD73DC3BA19F87E
+:10F9B000DD3A8EC98DF8BF1015E241F1A975329C70
+:10F9C000B323774898D722BEB7A09CE5DBDF5E2241
+:10F9D000EE3771A7FF642CBC9FC8F205209606EF96
+:10F9E000D558D04E711DF6EE83FBC8EEF41C728321
+:10F9F00078E8A979C70FFB223D874353258A9721D1
+:10FA00009D15270A587F02F1CD1E4F55C258D46F5D
+:10FA1000E59887B39CE7CFF44EFD8D07F4C7F2A2BB
+:10FA2000D14306CB2F779D9488AACB33B08E5371E8
+:10FA30005E2E258CE7C55C27156C27E1F1CC1FE411
+:10FA4000E3BBE6A9AF5E0BF3D86FC57C67A2684B3A
+:10FA5000601D1DA3DF543B701D84FF5D9130FEDDF2
+:10FA60003CC84FC20BD19470E64F629CC33BB2A31B
+:10FA70002C19FCF2D40A2F9E1B4C7D588E9C9B05A2
+:10FA800038DC0EFFC373B597BE5A45C7DD01B2928D
+:10FA9000B50709A5EF0E9B68A7A2C6C3EF3DC4F644
+:10FAA0004B2F831843BC6CEC3F2E3FD25FB36746AD
+:10FAB000C7FF43C9A5AFB6C584671CEAEB8E1956CC
+:10FAC000CC9F38355C134E01571783EBD7542B640A
+:10FAD00044E38BEF496A2ED0DB9D705C80FAD1BF86
+:10FAE0004CAE0B96A4C3FC8363E1F97C9736642A81
+:10FAF000A5BF1E9B967B23C6491C98FF55FBF3A30D
+:10FB00001BE1C8986BE6114F1BD08DA2254C8038A5
+:10FB100095FB0B940B22CF2D0A474ACFF49BB75B82
+:10FB2000A2759013AE285C35B82BB84307673BAD80
+:10FB3000D772B8FECF23F597B5017E17DA912EAEB6
+:10FB4000E53CD5964CBA20CFEE84FB814B811E4E0E
+:10FB5000ECB062326B0F34821EF5D8D9DFF5490B59
+:10FB600067C2DF71197BD082F1BD37297D68401FE4
+:10FB7000C1F1087731DE8929AFA6C0F98913694A36
+:10FB80000AC06771D88670FB894282707F6A4FDA3B
+:10FB9000C26915C81F2AB677F371264FD4FE518269
+:10FBA0007A9D9FFFD5CE95E1BED481F065DECF87EB
+:10FBB000F8F0B92903D3415B851DEF1F6A2A5F5115
+:10FBC0000C7A62797221E663355549A8879B9A3F82
+:10FBD00043B88BF1959332517579533D104D4CD705
+:10FBE000DD237FD286ED0DCD27509ED3E9E401DFE2
+:10FBF0001CE3FB9D5D56F2D35A5A36FC5BFE69ADA1
+:10FC000013F72DDB419F34903DB6E53A7948BA3F72
+:10FC100089C8FF71147777D6BC180F72B656725F19
+:10FC200002970ECCEADE7B19ECE7D73ADC97C0FEF0
+:10FC30007F8EF71156CF715F02FBFD631F4D9A0354
+:10FC4000FBFBB559EE0DF09741AFF016CDC1F63C78
+:10FC5000F7CB509F316E06AB27323A4879347F8E0E
+:10FC60001FF5B913E1F2697B4260B07B48AE6E7E4E
+:10FC7000C600977EEDB284795198B841E9E79F6B51
+:10FC800086B17B710B4298A735721C8BAF67A4B00D
+:10FC90003FC92BF277D346100DF657D39E72B07B37
+:10FCA0005BDF0BE502FCAE7ECA1184B8E4D2FB9E9A
+:10FCB000B3813E9A2FAB85C057B3CBEAC68C2B835A
+:10FCC000F84908EB5737EFC679754C70F3FB72FBB8
+:10FCD0008A217E55CFF39EEB4DF9BF8B9D7B311E64
+:10FCE000B7789B31EEB68484DF023E6DF8DDE079B3
+:10FCF000BFEF58D83C140E8FF972E84A1B9BD7F916
+:10FD0000E3E8F797A6F462DEB1E20E65D4217C1B2E
+:10FD10003CE8AF64C6E3B99A5B87BE5E12EBBE985F
+:10FD2000EE16AAFF29CB3DDEB2134BE77882EB1922
+:10FD3000A2846D5E3A4E2397CB9342EFD8F4F983B9
+:10FD400073395C9376B2FD6F735EEC5CD05700172D
+:10FD5000BECFBC74D60B53002F029F1724906ECCDD
+:10FD60005F4D215E8E172FE045C03FBADF4CDFCBE1
+:10FD70008B451702FE84E5DBC53379D1F78403EDAB
+:10FD80002BF3FCAFE3FA57ACA39DD7079A7F3BD781
+:10FD9000B7677BFEED5CAE9BD721F8583C177C6CB7
+:10FDA0005EB798F799D359C8763A7426E44C23A9DC
+:10FDB000F3605C96CB150167314F01AF9E01F25D98
+:10FDC00095E63F18D6A3842AF1B0FC7650A420C74C
+:10FDD000BA2FC4942BA57917F63BD3F508793BD0FD
+:10FDE000BA849C35AF4FC85BB14E2177C57AA75214
+:10FDF0004182F210EE7E90C07FA833D8C3157062A6
+:10FE000041BF0F64FFB9A13EDD7DA3A1FF0F3257B3
+:10FE100018DA2F54D718DA2FF2AC33D47FE4FD95DB
+:10FE2000C9AEDF6C68AFD51E34B44F0987A681DD3B
+:10FE3000FDB7966ACCE73EFFC3BEE7A01E6C7163B8
+:10FE40007D4F4B26967B5B54E4EF7D2D1E2CF7B740
+:10FE500078F1F97FB59463F9428B8665A8C587A5CB
+:10FE6000592ECCFCFD650AD8EDE5A12EF407C68F0E
+:10FE7000AFFB0CE4E1014BA03591C2E99C37997DC1
+:10FE80004E02667DFCE55B37815E77B37BE8DA7A0C
+:10FE9000274B6A0C7BCE45F59DA6A317574D98C0FE
+:10FEA000FEB28BC4CEBBFC6A1CCBF7C17C3D4A9B27
+:10FEB00073ECEC5EDB397324CC4F9C43D879055A44
+:10FEC00006EB68FB4C85F841FFD73A15DC8F22FC26
+:10FED000FCF0256C9A70BFBA3F0EF4775A2A9E57F1
+:10FEE0009A0D0FE97C654DC6BCD64BCAFF82F980DE
+:10FEF0005738D9DFCDBA7CFFCA7FDE44DB499BBFD0
+:10FF00008C9D8710F786BC6E3913BBE12B386300DC
+:10FF100079A09297FDDD9464C5ABF70744F9D771DA
+:10FF2000CC1F98D9CACF0B1C2468C7097EA4EB6BE1
+:10FF300087F90BBEA8752BC1512ED0F7EBA641FF58
+:10FF4000FF0B270420E00080000000001F8B08004A
+:10FF500000000000000BB55A0B74146596BED5D591
+:10FF6000AF904EE88400411E76886020AF4E271D7A
+:10FF7000C26B28124054C446650714A540313C9317
+:10FF800018981547F774633308AC6737337A5C5DAC
+:10FF9000C1D3E0A0ECACE7102171339A300D2A8F69
+:10FFA0005947A3828266B141E4B126742428E270E5
+:10FFB0008E7BEFFDABE8AE4E02E859939373F35797
+:10FFC000FDF5FFFF7DDFFB552D3FE4720701A0BA71
+:10FFD0006C4D1E14209D221DB7215DBEFA3B30F7EB
+:10FFE000C3F1EA0B602E06982ABF164C2D01387F0C
+:10FFF00004DC369C3FA65D3DB3CB85FF5CFE5182A1
+:020000021000EC
+:100000000100ABECF83F8ECB3AEB2AFAE2BF45E1B8
+:100010007A30D335FCF911FF8A0F34813927361E27
+:10002000F77DFDDB346FB75F05B305A0D93F876966
+:10003000D8BF18CC2300F6FA6B78FC8E7F358FF78B
+:10004000F9034C0FF8D733FDABBF8EEFBFE77F9EB0
+:10005000C7EFFB434C5BFDDBF97A83DB09D01FE084
+:10006000426BC540350F8F46632F6E689F9CE94BEE
+:10007000416A16740E1DC883D40E968C0CA473248A
+:1000800096075E0F403AD3B08AF79767BEC5F2C0B5
+:100090001F9F1DF99D0DDA4F463F339402DC03820A
+:1000A000FFD965FF7D494AA5819A23A1BCEECDEC1D
+:1000B000031B2580FB2090BF00E99CCA3ACB7889BE
+:1000C000EE4F719E42794881CF4C3FE6A24CE867E3
+:1000D00052778A078553BADC6480A58EB556180E10
+:1000E00080523A1141F99A40821FB3009640D80AD3
+:1000F00074FF8F96139138392F03C8826C3CFF6BC5
+:10010000169EAF5F077A3E6E5DB94286B274929BCF
+:100110008BE5B60222BC9E4D7EC45DE3A0FDEAAC39
+:10012000B44EE2BE4B1DEF5871D0C3BEADFCFCB562
+:10013000F6D5F55405B080E6AFCD54EAF6E0BA2B1B
+:10014000FAB43D209B7A9087D3DC79653D94C3BF98
+:100150008C127A9553A6D85507D9A9034CA8C7681D
+:10016000480ED9709DC55975A9B42E1A662AE0F5B6
+:10017000252D32EB03CC8A7910EAAD52D35B3B8458
+:100180003F21BD544EA89C01A8BFC59B8CFC2C757B
+:100190009C64B97F0BCD3DF25B054F7F23A776E7CB
+:1001A000B76AC22DA769BD2A4D6E7C1DCFB5BA4D69
+:1001B000DAF14EDCBC95EE948C53C9E4583086E4F9
+:1001C000827CB8C3E46F8764F6B7DEECE39C1FD88B
+:1001D000DE2FFA61C73B68FFE72EE3851B009E70A8
+:1001E0004F7B3E30E197D35BBF62DF0637F913DA0E
+:1001F00009F991AEC775684380E75E576E0F0550E9
+:100200009E51AFD34CFB47A5503095F47209DC6B7F
+:1002100050DE939BF71F213F996C7784496EC84449
+:100220007BBC5E27B58BCB134F868229387F7C5BE6
+:100230004026B71D7B480D3A703CE63D05358D7173
+:10024000E61D9F4C7ADFE96F6239D4FBEB99C6FC5F
+:10025000E726F6331884D7B2AFDFCFE021BB89E2BF
+:10026000DA4AED4CC134A83361C0EA724C93539022
+:100270008FAE30B8E97AD1215790CE55DCA6C8A907
+:10028000782EEF493548E75E876A506C1427037271
+:100290005FBC6E3343D88671C4966902254EAE6347
+:1002A0002F84821407F5B8D69C24EC79D2E57A998C
+:1002B000E296D3AA6EDF82F2843793DCDB5CDDCF7B
+:1002C000FD96DBC472FF32DDF7961B29385C237D77
+:1002D000F9643FEDAFBC48F6D390ECB6E173897199
+:1002E0005A8F8BFA3ABADC7439563BBB38EE2F5F23
+:1002F000DDC5712F71DF6A13A8F528774F85ABB87C
+:1003000016D7695F03F367E1B8CE8234AFFBFC8F89
+:100310003CE5EF93BD4C9527B42A742EA7E9AA7645
+:100320005DBDFA1BDEBFD7FBDAFED52D5EE7424787
+:10033000ECBAA34812711ECCCE53F6983EAF57EFDD
+:10034000133BE718F2D6A4EF5543DE9A8C9136FEA4
+:100350007E85FD11C378AAF331C3FC5B32D718EE5A
+:10036000DFEADA60B87F7BCEEF0DE33BDC2F18E6E7
+:10037000DF59B6C5707F96F21F86FB33655024F4B3
+:10038000B97C2964213F9B0BF54CE7412BD307A097
+:1003900093A98A96447421B8993E043EA62B3CAAA0
+:1003A0005C847613B5740E20BFEF78E3EF796417A1
+:1003B0001DBF1AEFCC72C5F2B29EA77F6A3EEE63F4
+:1003C000453DF5600F038A84DDEAF1BE57FD24C484
+:1003D000FB6811C6133C67B43199E34C34A54F4810
+:1003E0009262F1042DD244F958F75B3DBE14CF73ED
+:1003F0007FB092FCE83D1946B8BAC79BA9662C0DA0
+:100400003C74DD9D737F7E6CFFA00916939D6D4744
+:10041000FA3AF2D1775EC4EC8AE3A780F8407B9B7E
+:100420003C770A44F0FA4C272821CA4376C848A2F0
+:100430005878B92B6F36068899DFA3A2D09E7F48E3
+:10044000570A49DE81A726A49DCAD5E2D28DA8BF4E
+:10045000E326E6079648A111288FA60631CE5F94C1
+:10046000C6FCDD0761D6E3FD10B110FFF301384E85
+:100470002F0017D30741617DE2CAC905189F1635C1
+:10048000983D1B91CFC2F4CEE1E49FF9638FA64B58
+:10049000782E2CED14E2A7D004EBA9BED1F9A8D593
+:1004A000F8D858A454D0F90AD35B373E83FB77368B
+:1004B0009A602BAE737AEC630F435C3EDEEE299FAD
+:1004C0004EF37648A0505E0DB4D842DBB268FFCE42
+:1004D00001940FF4792B3C15338B70DDD945C0FAAC
+:1004E00086D6BF00E9679653C81EA6F46719E07365
+:1004F000C37CF93DF967809F2B2459DE00E2421945
+:10050000EFCBE3875F7F6DCEDA3CE6274075DC7684
+:100510008F3A9FCF6FC55840E7DF6C0B6DE57AAB24
+:10052000669884E7AC7CC966A2FC7F14E333DC0CDC
+:10053000F0B9DFCEF47FFC4EA65FF833991EF7BB0F
+:10054000987EE9CF61BAE87B6400F577BA48A922C2
+:100550007E7AE3A3F73823F8884A30A7DED1FD7E00
+:10056000A5E60F050D279F4C263B6892DD64A7F991
+:100570008D689878EE73CD63427256BC5CD5C7899E
+:10058000CF82A68FFF30BE849E333B259C7FAEA9D1
+:100590006B00F96FE2F9AEC8A3C52AE4A19D7747C5
+:1005A0005AEB467A7E47E3703A21C611107648FA34
+:1005B000947AE2630DDBC9AF8A44BEBFD3D659E259
+:1005C00074C4F8032A3130CFD46A7966AA7C39958D
+:1005D000FC6216AD3B96ECFAA60F68BFC001E1873E
+:1005E000A8D7F9BE387FDAA5C941A7F92D561FF95A
+:1005F000D38E964FEEBA1DE53073DCAD5ED9159BF8
+:10060000FF3209C14BF67DE9DF9FC9E0F94EDA6A96
+:100610002E6C99EAC479F7D9F7BC4B22B8DF797C04
+:100620006A1A8EE7674AFB882E70654D4BA7380023
+:10063000217EFEC19CC9FBC8C466B86759A99E98B3
+:100640004C4E1517772BEC186F0C71BE9F617C4BCD
+:10065000E660C3FC5B5DD986FBB7E7E41AEEEBFB13
+:10066000CE70171BE691BF52BD8D7CB0DE619B1C26
+:100670001A21911D5CF86C19F33FB784F88FA2FC26
+:10068000AC58389C29DBF0DC3314361AF7A6927F7D
+:1006900026D6B5CB5B5EDEA7B87AAF6BABC0D737DB
+:1006A0002CF55ECFF6560F5E6F5D8B71E40F14472D
+:1006B0000ADFB8C719C473EC187BE90617F2F761B3
+:1006C00051CFF56E54AB7713EDE88ABD4A2E613FEA
+:1006D0000765A07A48AF7B13ED08E049AD0E10F432
+:1006E000A7FAFBCC8F44DEFA8AFCBE5FBC7D6B347C
+:1006F0005464C8338556CC2FA89FCEBFC9B0952E61
+:100700005CC673E87AC88ED93F3CB4E5DD41257CF0
+:100710003D40756D15E5055C3FD923897597EF79E7
+:10072000775046EC3EAC3A6E980F4F48FB0CE3B561
+:1007300059C6F1D393F7C53FDF5B3CAADCF488557B
+:10074000C5385DF9ACC4F92AF1BE7E9EA97B93142D
+:100750008A9BE6661BF753554E051407554D98477F
+:100760007AC8EB7A7C982B434D4F716E80B6EE8C35
+:10077000BD4920FF8C758FA2ADD07902FF25F2CD47
+:10078000D1BE0AF8E2F6C9F288FAAF23ADEE9FBEF9
+:10079000C3791D7F063789BE234DC4DD8286D326EB
+:1007A00013E5BF3EC25E0A9C11533AD2E8E2E40070
+:1007B000A03F552F4909980AF1FEF0CE4FECA8FA58
+:1007C000519E412FD8516F9F994C86FC13A5988755
+:1007D00063CFCECCB9947F6EDF9B1436FD0C7E3C8C
+:1007E0005473202D2C177EFF00D98DD84701F48F2C
+:1007F000EADF81BEAF427182F8A7F132CF90A3CF7A
+:10080000E2BAD507451CC0DB8EC47EF6BEB87E16A4
+:100810003609FFB5E32FD53B55109AE620DC208C36
+:10082000FE0FBF9CFFCFF43832B8CE213FBFB9BB1B
+:100830005FEB7E5F7D58F8FDF9E66F3FA2387F1EC3
+:10084000F35FBCDFEB72D3FDBDFA7999FD52BF7E39
+:10085000AE599E1EEA41CE65BA5F296EF6D75AA7F9
+:10086000D8B776E2C5BB28CFD5B6A086A4EEFBE804
+:10087000B47ABD0CAEB87D76ECB62D0E39627C44F0
+:10088000F5FCDAF26DFAE43C41D750FE853A2DFED4
+:1008900088BA06F3AA2583F2EA2CC9BD0DC9E196F0
+:1008A00081E524BFC312845D1E5EE21E3B9EEF6E97
+:1008B000B11C5D77507D06993966DAE72E4DAF772A
+:1008C0006BF8D2EC96D92328DE7FD2B0F0B042513B
+:1008D000CE93CDFBFD1A025C1F1E4EF30D5D89E722
+:1008E0009C1914767E38ADB39DF0A8C31393A5A0D0
+:1008F000C4EBAF8DAFFF0E5B7C436B982F0D97520F
+:1009000046CB3F26FF847E598B8BA8CF8024FA3BB1
+:10091000F603F3A0A719675802A17D0AEE5BE50E66
+:10092000739DBA0C042E9058DF574DF8DA4AF9211E
+:10093000B11F9DDCB4E78854D0038E9160B7D7C255
+:100940002D12FBE0DEF0871FD27DDB3C71F8616287
+:10095000BD7EA52ED5EBAA6DC9A1AD789EB727FEA9
+:10096000DBB965385EB52DD9497DF7D9976C018A19
+:10097000CF67B7DA4212DE3F9BDED9467DC8D99DEC
+:10098000F96E5C012A4DAEFF7C8DF2FC9F2C6C173A
+:10099000006EE11F57ECF4D16314EF6AB7A548402D
+:1009A000F5B52AEEEB3DA0FC6A0AD7094B760D0A95
+:1009B000D9A4589E21FF706169716673924245FF08
+:1009C000D90377F725FCAADDF4FA30C6C3E4278EF5
+:1009D0003D86CF2D7B25C543F504E401EB6DF1D6B3
+:1009E000515BA83E7ED1A2EE27FE2B5EBD63601652
+:1009F000ADFF717F207EA2CDBB06507D14ABDB7BAB
+:100A0000AEF7CE3767F785BC989C743C71FD1FD755
+:100A1000F848EFC9928BAF9BA146194C76D1340BA5
+:100A2000685D8F2C29E4979D1B92B94E4DB4BB6332
+:100A30001ED1A72CD7F1877E60CF24FF5181E5100E
+:100A4000DD90BB7523CAE93B4FBA96AF3B47DE95B5
+:100A50001F6F9F6D556F917D6EB2312ED29E64AC2B
+:100A60001B74FABF9E34DEA7D27EC1804354ADBE54
+:100A7000641CE761BF87CF7B82AEE24790AED4E4CF
+:100A8000DF35DAD7E1C1E797D6FFFE8DF7582E9B09
+:100A9000FEF133DAF78043E031EF09F925F60395EB
+:100AA00076817B006CE1F3EAD74F6FFEB480ECF007
+:100AB0007463EE48D2E342B9F5D48BC8E7B994D653
+:100AC000638F23DD79E023D64BE27913F19B7649DE
+:100AD000627E97131F78FD1EAF4F2EEECFEECC7DBA
+:100AE000DCC28DF92CBFA9725E5FD263F46C2FFD5E
+:100AF0008A764E7D7DFD7CFAFAFA3C67B1D0D7FB51
+:100B00001AFEDE616D3D47FAED782357227CF0CA6C
+:100B1000F5F4D682B4387BF9A570F97B357CE4888E
+:100B200069CD6FAC688FEDF5CF58D4F8B8F713F1F5
+:100B3000F82BF5A0022EE700914A386F2173661C4E
+:100B40004FD4C7E40C389EA01D4FA2F3A05F4ED433
+:100B5000282C5533196FA7F590264188C7C1C96E57
+:100B600017D149928F710FBD6F98063543880F9347
+:100B70003DC238E15AC227B16E999DB6EE8E2CDC8B
+:100B80006F6D7F5847F5CC5A8BF08BC08264EEE7CF
+:100B90007439E979069C7986FCB2D6092E33AE33D6
+:100BA000C70CEB2DE962DE8D28E7C30716BE4BB8F4
+:100BB000EBA7E69AFEB4EF51C7B3F99289EABC50AD
+:100BC0000AF58C9F7DF427EFDF70EEE7A04CA4BA06
+:100BD000E29EFD768EFB89F8C42250795C0911CB28
+:100BE000057CEE8BB13F6CDB0B31BEBE18F75D238D
+:100BF000F509F7A53DE9A5E703E5904379E96252D8
+:100C00006A01F1B3DA2EE8A37D52B7123DEB74040A
+:100C10000897BD98342C44F9F445497D80EC199F20
+:100C2000E33E36702C3944F9EE5159AD621C3ACD91
+:100C30000A12CE8FF6D7E4D2012C97A8459BFF8DE0
+:100C40008BC725151EC629E1A28BE3F2F884BC539D
+:100C5000926B12FDD98F62FEC44EB321EF94146AD9
+:100C600078CEDF5D5CA74EFADE7CD5BC74B958F453
+:100C7000BB25FD4C353DD58BCF68F783109605CE4F
+:100C800023EA85F157EC4B91498F55DAB88AF21A6D
+:100C9000DA5534D51E9091DFF1CDC2CEC69BC37B11
+:100CA00088629485D5545F3461DED3CF817105327B
+:100CB00073D91EC6E9768A6BCDC379EBA41AEE63AD
+:100CC000EC54D720DD28B5F2397E059D4C152D9FBB
+:100CD00097839BE914F031453B653A1DEA98DE069F
+:100CE000F54C6740ABC8FFA3C341CE6BF08493FBC8
+:100CF000C15B2B4D547794FCBAE7FEA1518B27BD05
+:100D0000CB011DAFF4A7CB611AA0FF65F7208F219F
+:100D1000391C4712E591E8A7132122B39F5280C8DE
+:100D200026FCC0C5FE5A010A8FA75EA71CCA22AACC
+:100D300099F19B447954F46C17BB35BBA8255BEB48
+:100D40001FD35357B18BC7BABED0BF32A90E4DD4F3
+:100D5000A37EBD24B9BCCB85A1F8B35D27E79A314A
+:100D60002F951497AFCCC6717BF1B773CD98CF4A4E
+:100D7000C697EF1A8EE373BBBE13E3C2F2628B1BFE
+:100D8000BB983517E74EC1F92AF9672151F4438A18
+:100D900067AAE88F5769758CBAE6376E27FA8B3ADF
+:100DA000D4E1263EED58EC133E2A678BF78EC3A69E
+:100DB00087F75A70DE498B7A98FC77853D9CEA422A
+:100DC000F9AF5A33752085CEA7AC62BECD26705AD6
+:100DD0009D3FBC1E48C2F1CE9DB92BA5E1D73E0771
+:100DE000AEFF25ADAFAE191120FF551B25B7D06C56
+:100DF000F9C03928C3F6560B106EAAEFF7E468F570
+:100E00000CE747979BE3F760ADCE69DF999B4B7A80
+:100E1000EA2A163818646415931C8F8FF675D1FC76
+:100E2000688AB0B72ECAE5DEDEE9E012E51B9A9FBC
+:100E3000783DFA151E009F3797A817E97E75F26571
+:100E4000CEFBE78A3E5E17C98AD9AD844A9B87FCF0
+:100E500007150859393F4C705EA95329DE2DC2751C
+:100E6000501E253E3548216ECCBCCE528AABB8AE62
+:100E7000A904F7A9B6468615E173CFDE7DCC2AEC2E
+:100E80006E88B03B2D2EB5EC3EF8F86031F4419CF5
+:100E90009F55EFBEF4DDE728BFEAF30E374D8FF91B
+:100EA000D70B2BB9DF0487218EE87E37AEC9C6F594
+:100EB000F6F8E6518B68DEC48FDBB289AF496D115D
+:100EC0007E8F166DF974B03887DE875C947E4E3E57
+:100ED0003EADE589D3769117E8BD30F77B8DE2BD55
+:100EE00070AD8673D6B648A100C71FD13F2FD6F884
+:100EF0005B71B0711FE1278B373D3883ED2824FAF1
+:100F00000A17FE525C587A44F4CDCBB61BFB8D6AAF
+:100F1000EA9B693E84AD640F2BEA13EE6FAAE0BE34
+:100F2000B93A3EFEF7D0377B4B347C6C280C65BE5B
+:100F3000E4797DD51EE261625F5C05CA8412AE7BF6
+:100F40007D32EDEF35F78C3FF42FD0DF9389FABD7A
+:100F500052DB9BE4E460B958B99FA8DDBCD2EDA494
+:100F6000B1E6B75B4CD453E3C4773E80F8E7743FF7
+:100F70005EB25EE2BE0336F5631B2C7CC5A610BFD5
+:100F800085AF0CE43E04FB25AE0FB7BC625B4FE3BC
+:100F9000E0EFFA04E442C2A13B6F201C269884F5DE
+:100FA000A6C0F341F2300EC3B8C823255ADCD7EAF5
+:100FB00000081719FAF9A096FF6B53460EC4CE39F4
+:100FC00036EFC020437F12D4EAED123A27D58DDBED
+:100FD0006F10F793041F7B3EFC8764AA7B1BCDBE7A
+:100FE00064C2B5CF1F1ACE7D4C6F72F7621A82AB06
+:100FF000BCA7F47E3A23FB6A7A2B79DE2CE4A5D9D0
+:10100000ED9B7E05BEB4C4F4A2F337557EADC24A53
+:10101000B8C843E0249CA4F6E0CB413BF5851B8097
+:101020001188F320ECF9FC1913BF772F859C7F9D65
+:101030008063EF19B33B84CF37687191DE3FBBE229
+:10104000ECCCA6E1BF49AE3EE08AEBA39373D20D90
+:10105000E314F70D86E7FA960D37DC47796FA5F5AF
+:1010600021A0B4E695C6EADE3465B4E1B9A752A77B
+:101070001D60BF6F7D9871A97ED33DC6F3C8CD3288
+:10108000C503B820EAA532FC257F1B038120E96354
+:101090005CBBB18E2A8BD471DF9874C86CC0016CB4
+:1010A000D7C0A5B6907F519C1C024344DC4894B73E
+:1010B000F1FB8BDA8332D77BB543B150CDEA49DE01
+:1010C0003719E4ADFBA32EF7FE3EA3DC07CE31CAF1
+:1010D0007B906A94F7E0C546790FAD31CAFBC6D55F
+:1010E00046B966058C72CC5E3FCE307F445DB961F7
+:1010F0007CF3F3B719E68F0ADD6518E76EBFD730CA
+:101100003FBF7EA1E17E61D3D2EBD27F51B8D63012
+:101110002F51FFC5077E7B55FD07F057E81F581F6D
+:1011200065A88FB0EBFFCF0E4EE87156B783EB8CFE
+:10113000B36F92CF329E302112203B284B663B99F1
+:10114000992CE2CEFB07CE1F5270FC81ABD892499E
+:101150007596563FF8B438A4F733897DE39D655200
+:10116000C2FBFE24C3FBFE6B7D57E76D0D1BC6451E
+:101170008780BF9BF11C71BF4DD47B5261B8ABF42B
+:101180004CCDDB44C75EE0B4DDAD5FD5BFCF4BECEB
+:10119000B760F9217EAF384F7F2F434E51DA1D9F44
+:1011A000D4FB31BDCF4DEC7FF5BEB77B9F26EA98CF
+:1011B000EEFD863BD3CC75B4CA75F57E49659C734C
+:1011C000CB2875B0D74B4D00F6C926EA93234121B1
+:1011D0004C05E83D7494FEA72224F0CCBD84C7479B
+:1011E000D380F17345AABB3790C7C777464A057CC1
+:1011F000443FC55E758417F57A4272AE2B267C6239
+:10120000DCD7C3A81EC9F18A3ACF26A3A4302F0D7C
+:101210009CA7005DFF215D19E5F5C6F092DEEC2686
+:10122000F1FBA4067F98A9D9E9E6EF9712F1C588EA
+:10123000C9C5F569E0B7127FF7F3351D6E6CAC8E4A
+:1012400039BFDEC2750C68FDFCFD9AFC75DC639E3F
+:10125000C6CF095C6231E6E5FB9BF6B35E9665B6E8
+:101260006B78490DD7E30F0E7178F87B38A5D82D30
+:1012700070321D07192CFF94BAEB5AFC2FCB3C6B34
+:10128000C0A1E0B57ED7F5BE3CC6B758FFC4068105
+:10129000679ED83094F1F3D8FAE7188FBABFE643C7
+:1012A000837FCC5F7DD4E00F0B02C70DF723199D20
+:1012B00016C21F236F0C9A761FCAAFA3D1564AFAE3
+:1012C000403B7898F4AAAF1FD9903B85F6BD369F76
+:1012D0005FF339DAFCADAC5F9DCF63FE233C8EF843
+:1012E0002309DFA7093E759C43A7D6BD9063A6F7E7
+:1012F00089521F37E1CABDE11FBA9F994A87F33A65
+:10130000174DAE530227AA1943F55FDBE401E574DC
+:10131000EEB6A156B3A023C57850995D8CA74D2792
+:101320001AB538D6132ED22689EF89E649CA4B0B57
+:1013300070DFC747A94F913F542FED2C20FFAB2EF4
+:101340008C3C20E1FA5DFDD58D241F09DB8B41E942
+:10135000CC077F7776C6142890D055F679BFBC9716
+:10136000FAC4337D02E7A842D9DD784C8CADC21FA8
+:10137000DFF71E60FF3B898B119F813F4B029F72FD
+:1013800044ACB3709D8CFEEA73B42F7D4F46EFF7EB
+:10139000E83AD9A78E97462DA24E8C6AF5E266AF41
+:1013A000A8675F4AA04D54E312FE4894E3F5D323A7
+:1013B000094F3FBFC90654DFE2FE8AA924F6FDCAE1
+:1013C00000E485EAD877ADA2CFF4FCC516A638A50F
+:1013D000E3AAAF7BB378BD8C6C819766FC33C62DD6
+:1013E000F2C348EBB0592971E73D048C6377101EB6
+:1013F0001D8763BFEE15FD3A3C24E25EC786C18CB3
+:10140000B7AF3878E218C5AF7BBC6A23C975A1C9EC
+:1014100055CADF67A5EE61DC6CBFD7C5FBE27999E1
+:101420005F8C436B494F2BEC11C6D9AE85ABF7C629
+:101430007FC7A2D6E7F21847761590DDE8FBE239C0
+:10144000F67BE3F06FFD1CB175AEEE073A3EAC8F54
+:101450004F6F7E6AA486EFCFF7F5905F8F69726950
+:10146000B3F48CC75FF28AF778DDF4733300E1FFE1
+:10147000B63E98FB917EED15FC77CC457E18DF508B
+:101480008A48BF2BEE72B849CEFAFAB88EFAFA55EE
+:10149000F6E91AEDFB8AF85F5A23F07BFD7E5412C1
+:1014A0007A0D6C1078EA8ADD478F3D8EBB2C79353A
+:1014B000BF98F281FE7CA29C51BE23F9FB3B59BC34
+:1014C000FF42F99EA7F51371FB9F2BD7E850F19EC1
+:1014D00036BAE5D230FA3E6D057D0F5740F621F061
+:1014E0002F6830E25A28AF00E11BDDDF6B01BF1F20
+:1014F000B369F9C4A63F3FC46C78BE3EC597548A11
+:10150000E77F438B1B383F64A2EFB9B5F8D4A0F551
+:10151000DD89F84B43ABC04D1B32AD5C4753FD43F7
+:10152000F7F5FA67D58702375D9525EA6C3A27E922
+:10153000593AB28FEB852BB8B884F91EE5986E55F1
+:101540008794923FA92B399FC937A29EE97DC85F36
+:101550006FD37004911FBD5A3EF4D23A74AEBCBE34
+:101560009C274BB47DB1BF60FC6E2CA85AFDA0E156
+:101570006F1BF619F087FF037A5FA88030310000F7
+:1015800000000000000000001F8B080000000000A9
+:10159000000BFB51CFC0F0030947B0A3F20FA0F13D
+:1015A00067B2A1F2B3B950F9875950F9FE68FAD180
+:1015B000713B13030323137E35F8B0083303830C08
+:1015C00010AB00B10E33F9E680B089280343A904BB
+:1015D00003030F906604D23E405C06C4FE407E27A3
+:1015E00010CF0262197106864B405A5E8C81E1A5CC
+:1015F00028449F2D90FD438C3C3BAD792973F32803
+:10160000A60C5BCAA2F285D41818BCD51918266B93
+:1016100040F80648F2AB8062C26A10F611790606FD
+:101620003D205F5D16BBB94781F2FA40F9DD1AF83B
+:10163000EDDFA183CA773543E5E7A1C937BAA0F248
+:1016400035DC50F9AAEE101A00B1C92A3BD80300C4
+:1016500000000000000000001F8B080000000000D8
+:10166000000BCD7D0B7C54D599F8B98FB9736732D7
+:1016700033B949263079C14D081030E02484808A7E
+:10168000701322449BC204698BBB6C77C4D646148A
+:1016900008EA6A7C6C33790701096A77295A3AB1FA
+:1016A000A2A0B44D5DDC3FB5D69D40DCD2D6D6A01D
+:1016B00058E9AE6D23F5DF5A57D9A052A9D2B2E747
+:1016C000FBCEB9997B6F2609E8EEFE363E6ECEBDA5
+:1016D000E7F19DEF7CEFF39D1345F4106D0921E7D1
+:1016E000E1873E5F25F4273BF924A48790F9F01C9D
+:1016F000922373E019E3EFD933B8B64F2045581C55
+:101700002495841410F653D0D4B9599C4BC8641254
+:10171000FEF1CC425A1EBABE8E0468F9F5ABFF004A
+:10172000CFCED5D5B557E984E4ACE93BB69C3E8332
+:1017300091B8102D25E4412212920BFD15C7AA7C09
+:1017400084B44367971332299663C44AA160D002D8
+:10175000217FA7F28188A8CBB4ECC75F93F3309FB9
+:1017600084282451821585F3EED1ED9DF5CDA71F78
+:10177000DA99750AE1FFB71298DF44EDC8ED6CBC49
+:1017800018FDE73CC54B5E727CEC27A7C152268052
+:101790001FFB776304EF9BFF57C6CB25E51EBD8279
+:1017A000CEB74ED4E2509FF465C8B41CBC452609A0
+:1017B000817EAFE8115CFAC4EBD249486D9F0FF10E
+:1017C0002BD4FB93F07D8E08389F2977BFD9DB158A
+:1017D00024E4CC5A5F18E94323242B73F47CBED64F
+:1017E0004C48C26D29AFAE16A2385EF8C7C5B47DAD
+:1017F0006CB518DE0BF0D4ADCA80F766BD3BF93886
+:10180000A3E983E832C5A3CCE943AE130DCFDC4F87
+:101810004F1FF227A48FECDB2DEDC8C5AF17E27D7B
+:10182000FE85D3C7A71DCF5CD7D17CD582704CB9BC
+:10183000BBD843E8FA3F50BB2A3D9AA2DED8EB5A08
+:101840008EFC1EAC23463C45BB2DB09E38CF984D38
+:10185000DEE093AE8F34B2BCB7D9D64B9A5CB9A652
+:10186000771C7C4841FB7CCD7E9526497F338B16C7
+:10187000654D84FE64DE5FA7B62E46806E81B62974
+:101880003EA49EB204A1FC414224BC974320D2B2A4
+:10189000A219F1FB0428C5715D4CF8D462D1369EC3
+:1018A0002BDF6B5B0FB2262658E1579A1484430650
+:1018B00036E1F22E82C28DC10D439C9F06E57B6C02
+:1018C000EB2FFB48C243E5EA96E272625D07934E56
+:1018D00005C1A4D37B2E4CAE38C75B6D87F382DB8A
+:1018E000F964FD77669BA2F1DAC9E477269E28F2B7
+:1018F0005E815F2CEBDEE52287844B0969CBEF8CA0
+:10190000C1DB2EF8DF65489F20B448577EB906F446
+:1019100044F60932C0E931C9239489F57A898EF4F5
+:101920001413EE20504FF245104FE6F7B1E1E27488
+:101930001733FA8B69BF9FE5DD7E96EB3352E17A70
+:1019400073C884BB08E7912CD379BC7B17FD1FA516
+:101950008F589910DF2B8CFE5E07FA90CAA33A7855
+:101960006F91276EC12ECFEAF8B723CFBC36631E26
+:10197000A5C7C1B044405CB53EE3366A68FFC7AE58
+:1019800014E26E81C34BEBAFE070BE686415007D5E
+:101990000ED6B8917E572CFF3008E47BEAD02B722C
+:1019A0002A7E5DB1C8958483FEB7C93A3FFADF2429
+:1019B0001803F9B206E9C8846B43B984700C2E127F
+:1019C000E230CEC0AF7E7FFF1514CE172B84B05B04
+:1019D0004778FD848E3768BC1F1C4F4E10737C9D6A
+:1019E00068804FE7F823EBA186D7005F36688A7ED0
+:1019F0001F1DEF66297C14F41899CCF4438336A399
+:101A000006D64712187D2C1572B05D9BAF7512AECD
+:101A1000BBB436A5BC6AA08A422B87EFDB668C0B71
+:101A200067DC353C64A1EBA6D70BEF1FB0C039478C
+:101A3000F0077F97467F594016C03ABFE75B959EF7
+:101A40002063F7F776B3DA22BB08F9B059BF7FC03D
+:101A500035FAFBCD1269EC2B1DFDFE1A41E5F88825
+:101A600029609F99F31E99A72F88F47D33885F4AD8
+:101A7000EA37EFF3B4C856F9E398C7087E3F613BF5
+:101A800035786B2C57077E8BAE14A01F99FE5399A7
+:101A9000E4C79B0FD433BE73C0DB11FCEF81772208
+:101AA0003E7ECFD7DA09F66A9B8BD14B7BB6186E98
+:101AB00025A3E9C55C0F138F17BA1EDB040FF2874D
+:101AC00049470DE2DA71D77D223ABA03E8E892FF7E
+:101AD000793A7A10E868FEFF493ADAF57F918E92FA
+:101AE000E5E5682FACE47DF50FFDF62190CFBF3022
+:101AF00024947BBF58C4E4FF2FA24C2E0E92E8F62C
+:101B0000F9A00F8E4B28A7068D363FC24B4D629829
+:101B100007FA5D94FE5E017B692695EBCD2A3EE9CE
+:101B2000EC0B56D1EFC7AEFA301FF4D731BAB6601E
+:101B30007F13326C18B4FD4B23656A8043D9C3CA46
+:101B4000C32D6763609F0F0AACFC2F2D678D188E25
+:101B5000B7AD7339C5E74AF895C2B17A9160C453FD
+:101B6000D0C54F0485E1A586D8F42A5D979F0894D7
+:101B70005ED4C866B4AB098910F40F8BA99D60B11F
+:101B80002F9A4081815CAE71A3FE73F6FF12B70BF2
+:101B90009D76DCEA45652ED017EEC86979883E57F8
+:101BA00046042C03FE350BDCA22118A007228BDC97
+:101BB0008F82FE8BC8C4A5A5E0D79586DB66779D8E
+:101BC000E67A8CE2650DF35BB482FA39C9FAA74D67
+:101BD000FDEB98CF587461CEC32C5FBBE8F4401680
+:101BE000CCBB56084F8786AA56F045BFB5FF34D305
+:101BF000BEF103DE7EB1E6DA74460751D4AB263D72
+:101C0000FDF88DAFB860FE647516D2E5EA3AC96694
+:101C10004FAEAA49B3953FBFE8DA71ED7012B5E057
+:101C2000C142F7813C82744A7E43ED144AA7B1EA6F
+:101C3000E128DA2D2705BD8D96D317374D857EEF28
+:101C40001133B1BEB0B869E610DA5BCB90FED37841
+:101C50009FE94AE3EF8B40AE4E17C9A33AD8A3E3FE
+:101C6000FB051D9CCECDB22B188D09743DF5985601
+:101C70002E8D83EFB821D6A6F21BA6896CDD3A62C1
+:101C8000ABB4620068C02E37326A1AD1FE33EB5310
+:101C90003A9E2666C3B8317C3F42C7DD745EB49D70
+:101CA00097D922247DF6AA7432CE3CDA1DEB4FC5BB
+:101CB000BF914ACEDECCE1238758FFA64C4ACFA481
+:101CC000FDA7A86F3EBB78FF67C322190438E588DB
+:101CD0008AFC50524DACFD10A30CCB0A2FBA431115
+:101CE000B590E2D35D2AC2344847E9A386AC031E0F
+:101CF00062B8DE5BE9DAE65BF872EB9F25F4F36F1E
+:101D0000168B5A406E6CEDBF89E8141FDE509C6044
+:101D100079CE8D2AE0692B75B206617CB98F001CE3
+:101D200069F9F4773A4E9A46E23AED4FD6FB122221
+:101D30002DCBB5246CD04F7E2D2C78A99C381C2A35
+:101D40006A91E9FBF6B504E52301E961A19FF6D0AC
+:101D5000CB8604F4B3868401E0F6E03A9C6767E939
+:101D6000BAEE42FAFE4C9D8CF103728EC26BFAF50C
+:101D7000D4CFF0961003C6DB9A43E23EB4830DC481
+:101D8000AFA2B1F5D3771593C43CFA3DA3B21FC6F9
+:101D90008FFD3D617C49985C93B93C2132A53F1889
+:101DA000BF490BDF9782FE5412BD499C6F59672DC6
+:101DB000827EAC136FE90AB906F0DB5E46F9208536
+:101DC000DCBB4314910EE2E1552B8B528C738FA830
+:101DD000A37C32CBFA5905E11FAB7EB29E4C12595F
+:101DE000D0B521005E482488F3CB24233F0694B36A
+:101DF000F87C279146AC175AD8D30FFC966BF45554
+:101E0000012EBEE6FFFC315C37F28806762C85B6E3
+:101E1000F87C56525E80CE81F9BD1716D1EFF08B5B
+:101E200009CDA01DF83D8321747E758271B9746857
+:101E30004201BEAF596D07BB2440C2027CF787E563
+:101E400098D5AE4F27B46C8BA790E3C59584897C59
+:101E5000FCAEF503EB68258D9702300F068C7F05ED
+:101E6000BF699B3F8A7ED8879EC05C18EC4E6FE0AE
+:101E700051787EE8991247FF2CCCFC2D95FE03F299
+:101E80002E7DA16CF36F320C7B39CBE1872D937CD7
+:101E900038CF8CCF12EE5F1975D32725E1A210D56C
+:101EA00003BDECAC9109F8FF3E1F83C7842F4BBAEA
+:101EB0007701EAC7B07C12E0A0684138CE90730980
+:101EC00058E24009C1F82985EBA403AE930EB84E41
+:101ED0005AE16A52D97C9DF662AC9A943452E07E03
+:101EE0002872FF83DA4D60379E21EF18B540389194
+:101EF0006B50CF0634D6C6A70E62B042231AD281E9
+:101F0000D36EA4EBF49ECDFF5AC8CB3A11601E14D9
+:101F10004EFB77928FF48265898CC485D72D34F17E
+:101F2000A57FE1DF29FFDD74D44580BF281F4BF07A
+:101F3000DDC5BFDEC4E3C3EBC0BFA6F8FB12890456
+:101F400000BE77898871A877C9CB81791639794A1B
+:101F5000E4F6092CB1958F493804725CF6750E4A87
+:101F6000014483496FC2795CC73093F33E467731B1
+:101F7000A2B6A03EEC66FEA7194FFD728FDD1FFED4
+:101F8000CA2E7BF946B26A12C44B6F7CC845E2B4D4
+:101F9000DF9BACFE3D5DA757450DE1FB0A69EC04F4
+:101FA000BBA4CBC5EC8D751A9121FEB9E1FF7DA3D1
+:101FB000F27A3A9F33200FE683FD4EC1B7E891F5E0
+:101FC000C1B862948E9E5F9B105E718530F6FCBA3C
+:101FD0005C832BC0FF8E6D77A19D499C71D08312CD
+:101FE000C6412DED10DE1BBAEDF39B68FECEF91253
+:101FF000F200CE77FDBEEBD13E1F6B3ECABED4F6DB
+:10200000A64F126C711F93AF4D7A77F27785A4B308
+:10201000B80E558368AFFC3A2DDE86EBDBB800D6F0
+:1020200077A2F69741FBEC4FDE7EF1A71C7FE90417
+:10203000ED37A8C3CB60BDB7047B22C09F661C6B85
+:1020400023891979F457D7739B6360BA8DD40B5DDC
+:1020500060BD7C5A4FBA807AC5E3F7778ADB253FAB
+:102060003AF02D05ECD4779F7C6305D80137FF400B
+:10207000222AA5875307FC2481F64A5C01FB663DB2
+:10208000A5BB38961395D75AEC614AD1B80E377F65
+:10209000D78F76C4FAA7DDF13ADA7EFD3FFF762EC0
+:1020A000A17838D53AFCAF7940CF4F0A2CEE1A1BF5
+:1020B0009A7B2D7DBF5E267F1B494147D74B8C9F66
+:1020C000DEF97EDA1AB013857DFD5FC47EFBBEE0CB
+:1020D000725BF4F11AC985E3D27AE847C4F60BF1D2
+:1020E000E90283CFEA0F98F1EE77F60B0CBE43AE10
+:1020F000B807E0DBD7AB4469BD4DFB4E235D2FFD38
+:10210000EEB70380874D87EC76FAA67D52C23D1765
+:102110009F6FC01334A85009F864FCBCF1E006D4EA
+:102120001B1BFBB69E067EDE74C86593FF142FE171
+:1021300004E0F535295C07E57F7A22A05354BD3DC4
+:10214000B8370078A5FD5EAF50BA5AB9D0DE0EFAA6
+:102150003F9B39BA3FEA19A2DFBCA96F0B1BEFE026
+:10216000677F0FF27613617ACAE4E7B7E1979CD1F3
+:102170007A668B648F6F9D212F56E23EE0BEAC9451
+:10218000FEB3A9574CBEBEF9DB67F6C4E8F8EF3CD6
+:10219000FD1F7B62741EB7FCE5FD3DF7D0F991E7AA
+:1021A0003D1AC8AB4D4FBE1A2016FC3F26B1FD802C
+:1021B00053FB9F787C37E59353BF74A31D78EA8760
+:1021C000BF9FA2D3F99FFADE9F26819D7AFB0FAFB6
+:1021D0009A0CF8B8FD99A593C7B3D7816EE36EEB5F
+:1021E000FAC6B17FFD90009B20843CC79F8E753A54
+:1021F00072504A4088E0DD13EEB89BE267137DD74A
+:10220000540EEBB601F51594EFA5F8DE78A0EBB40B
+:10221000343715DE637962089E893C128275BF7679
+:10222000E59515F0748575A013328C7AC2D96ED3FA
+:1022300071BABE978EBD9ED49E5000FF9B0E6C61FE
+:10224000E3F6D1F50C8C5ECF77E197CB46AFE71183
+:10225000C91E673A436EF9E66EF878300BD77FAC4B
+:10226000F5DCF0CCE7C6F5EF4CF930119E1B040607
+:10227000D70EC97845027E7CFAA9C77707D93AD725
+:1022800051C49CFAF69929B0C9FB966BF88B2027AC
+:10229000877FE8D6C0AE5EFFC3D790EF4E3D734C4C
+:1022A000D1717F9AF804AA274F91919F41D09B1B2F
+:1022B0000556D8F4983FE10E24D76B63BCBE560F89
+:1022C000E0FB37F07D9CF1C3C678FF6A21C5FAF9BF
+:1022D000E422A69FE2D988970DFAA0A2F9ECEB2A96
+:1022E0002C84F57C6319D0DF58EB69CE5F83F92F1E
+:1022F000B0ACEB638C8FC7E2D753BD6E59481FBD9E
+:10230000CEA7B85DB1292EBC966ADD096965F1BD1D
+:1023100031E2DEE6D349178A6CE773B3BD39FF8932
+:10232000F87CE2795D1CDECE707DEDC4DF3BE752C8
+:10233000EB812259E07AABA736D7A2EF3C2EAAC791
+:102340000AC1EE6C8CE51526E1EDEC9350BEBFB3EF
+:102350004F427BDF2927368EE1D787CD710EF5CF2F
+:102360000579F6CEE1EF737A64F4BEF1C01B4A8CB6
+:10237000EB85B8552F407F29D6E372DEDFA6E75202
+:10238000F7B7E9C0E994FDBD2D1B5F00F8DF1E74AF
+:102390009118EDE2ED3E29659CA45876D9ECAC4E3F
+:1023A0007FE58974DA4E0A787598775BABF15A0C41
+:1023B000EC91975D04ED4739FC969B7E6FF37B7142
+:1023C000BFA52D7023D12DFABBDD81273914413FE4
+:1023D0005A0E462AD85E68DCE6CFBA34D106379169
+:1023E00063F9B0CFF9F3C2DFCBD02FC4D3744B5C09
+:1023F000E8259974403CED254308B79014712D47AA
+:10240000FF914512D1AD74664C15ADF1C5C0E1BB6D
+:1024100030AED1441A13106F22F9A46FAFA5DF4775
+:102420009A7516778D4C15ADF13F7763A3E1A670D1
+:10243000E4DFAE1581FF36D6F8058DF67D5F73FCBF
+:102440005B793C82EC7BF2C92769792A7C13810E87
+:102450002306C2718EED2B2FE5F2F047DC7E3E2C79
+:102460009001B0C36AEF8DCA20EF84D0F518175DD4
+:10247000967FBDBCCE428FCB42A77340AF7EF3CFD9
+:10248000D29A54747A88D355CBDF3F9E03ED777B85
+:10249000BE90CF9CD908C297C7E35D03D9CB7D100E
+:1024A000DFEBBF69D98B33E87C73358940BC269755
+:1024B00054F9CA289C79C7A5B027C53A98CF3D3CA6
+:1024C000AEF768B386F2FFB1E610961FE778DDD766
+:1024D0005C82CF279BC3F8FD40F3422CF735D7E24F
+:1024E000F3E9E608BE0FDCFD6CBF0278F92AE98348
+:1024F00078CDC1E635F8FD9F9BA3F8DCCBE7B30CA4
+:10250000F0E2B3CD1FE33187DA97B4423CC6C4A3EF
+:1025100013EF4B486CC08DFBF9820E78BF4B66F20F
+:10252000C589DF29EE3E01E44BD32D04EDD73D3CB8
+:102530006E6CCEF7EB32B3370F72787EE0897E4750
+:10254000A6CFF76A8B4BD12E229130C8EF3D4224A3
+:10255000BD8C5679217B41C82A87A7FAA30765CB92
+:10256000BEC2946E16EFD92D337935553FDD9F41AC
+:10257000F1509B2FE8104E30E77BB84ACF073979EE
+:10258000581070BD6BF3255262A17BB3BF6FC82298
+:10259000DFDF482DB79374CCE441E6D57209F8B576
+:1025A0006788372C517E7F3E871C24D4FE781EE836
+:1025B00012E4C2AFD2304E6CFA37DBF87A670251C0
+:1025C00040BEC4EBFE38C89FB1FC9E4E5EFF3D0E80
+:1025D000D70639F28A8CFBCA3CFE4A1218C784948B
+:1025E00023A0C7DD9EB53B6AE8F3FECBDF3E01F1D9
+:1025F000C1779FF1E800D7F68A93012B1E4983FC2F
+:102600008E753F7E44DE9CCDC3B8D8FF27D137649A
+:10261000AB1C0A0E2BD0FE7941DF09FBD7B1572541
+:10262000E4BFE785F82C8C63C904FD82E76F0A617B
+:102630007E87D9CE1FB6F377A667E8E14D30EF0667
+:10264000251C4BC117BF49D36DFB46EE90BD7D08DD
+:1026500074E67C56D6297D96F1798765430238E683
+:1026600093283E17101D9F39AEE847308F79A42F6D
+:1026700007CAAD6953AE60FB07FF6378535DFF0780
+:10268000F166D26BE8F2128483DC2D86A7EBE84D6D
+:10269000DAE87CA54BE0F855519EE78EEC4F35FE0D
+:1026A000A82088DDB0388996867230D7C3F0D73439
+:1026B000741AE3BBA129C41677EF6810910F76BF97
+:1026C000CEF6F5CE3414ED9C41EB57117D474DE12C
+:1026D000E87998FCB15B8DA4A7DA9F329F265F98BA
+:1026E000E59D53BF48400EFDE3D42F62DE51EEEB73
+:1026F0001E1DFC8EAA5FEF6F01B9D8F106CBAFF8B3
+:102700009537BAC8353F29673A6E6A9C0A7E50C031
+:102710001F59ECA2F889E4C7AF037977A6F676379C
+:102720004EDDC7F25E9AEED577CED4C75E9F3D4DA3
+:10273000E3EFDF98F3DA03F31A67FFC29C97B95E01
+:10274000676A570FDFA8839C294E8FA66837224FF0
+:10275000AE5E3DEEF87BB85EA1F35F6BA5CF294D71
+:102760001AE6B798EDCDF93ADB3BE79BDC07BEB044
+:10277000BCA03E17C9027AFFDEC753FEE925148DBF
+:102780001109F434E5CF8D004F2569C43291FB72F5
+:10279000C0BE31E97977E7E339A817E47821E67715
+:1027A0005DE0781D2412A9027E0B8B61ABBD623EF9
+:1027B000DB46E83C81715537970362DABDA1547856
+:1027C0001EE93FDFCEFFDB0861723EA1A29C87407D
+:1027D000A146CB854749F97DB4BF06480AA5E35415
+:1027E000C92C1E32EFA8DE2BB1B8AA54EFB7E09186
+:1027F000EF3798F1DD0E722FD174F02BCAFAA1BA1F
+:10280000C9A74794E84340A74A48C77C4F57302A96
+:10281000B0FD38B63F54C2ED92ABA4B52AD8254DD1
+:1028200024A2CE06BE3D2E119687C7F8DA6DEE8340
+:10283000713E76733EA61C8CE519FCFB739CBE0EA4
+:10284000817D82F604A3A383DC3EA9191E3EE2A784
+:10285000ED4A067BAA613A4F83BDE206FB248CDF7A
+:10286000BF03F60A2D1FC9F8C76B6653BCEC33C40F
+:1028700030E0FA40B3C1F8A1B901BF37919877337E
+:10288000C8A547440DE0EC7AA4550AD0F27E55C0A5
+:10289000F8C523CD8D583F70CE9B007F73BF9A1033
+:1028A000C01E391326E118C04DDD2398D70C3E8F8A
+:1028B000AA370771BBFCF1F87BBFDD41EB3DB8D017
+:1028C0008BFB64267FCD681AD6AE01BEDA7B52DF61
+:1028D0000CF0CFBFD580FADBC245B84FF104C51765
+:1028E000ACD3BE5DEFED1AA4DF0372D766F0836749
+:1028F00016AC427B28A0FEE36D500E684FFD1D3ED6
+:10290000D5EFDF09FA7A665CB4ED9F07D49FDE0548
+:10291000DFAB87C235E9B49F59C707BBAFA6CF8EDF
+:10292000F0ED2290787AE61F705FE3B0A07DA907F2
+:10293000E26AD72B48AFC609A305D8D15561CF832A
+:10294000CC7E310A690B64F200C53B01BC1B32F43A
+:10295000FB96AB10E92C14C8A909D0F2E38F9DFCBB
+:10296000F1D5F4FB915DB7A25C743F22A33D36F331
+:102970001BB793AF58E484FB3139655EE95B2E37B2
+:10298000E3A34756F7CCD2197902FFCDDA5BA3A2B5
+:102990009C78D19EE760EE0BF792E85B2EA4676609
+:1029A0009FC81ADB47863D2FD84F240F8B8C4F22B0
+:1029B00051AF35FFB9E4EB6224559CFBAC4BC679B3
+:1029C000B5C76B4A601DE4F377E03E19E9B18F6F3C
+:1029D0008E47C73F6B956FB2C6E02A00D54FD7B37D
+:1029E0005FF9F71C80FF6CA3A9A712A8A706CAC4A9
+:1029F000C4540ADF030F897148CA3C52CBF4D6761F
+:102A000099E50B6EE7E5C7CE91B85098E4A3999C81
+:102A1000DF1E7B4464F65C9CA09E23E7CEA37DE191
+:102A2000E3DF33CB5E56717F2266F8AA2A312B9002
+:102A3000FF58E885E2E8D298D72667C5A64CDBFAAE
+:102A400017508BC59E4F5D94AC2F811C3FAE02FD8D
+:102A50009EA17E2BD0EF12BE4F5463E6614AE7E69B
+:102A6000C1FC1F36F5AC9937E3C893DEDBB8CE0B5B
+:102A7000F1C2174CFA696834D0FFD1DC389EB94FE7
+:102A800058724B2406FAD3956FCF9FAE72E4472F4E
+:102A900071942F36BE52AE38E3A8DB66211DE801E3
+:102AA0009457C51CCF7B2FA3EE7CFAE838CB48BFE8
+:102AB0003C8E407A02B87EC59C80EEBF5B6A00BF48
+:102AC00020F040798635BF60B9C2ECEE815FB9096C
+:102AD000D8F9FB6B548C679A799D2E3EEE0A45C758
+:102AE0007AFB1FBA4385F65DC1220FE0EBC8E5EB28
+:102AF000BD98FFC1F3534DB9DB7AF9FA6B6E0279D9
+:102B0000982DA2EEE9C86FCD857DF9076A54CC3FB8
+:102B10000DA40DF51DA165DF134AF851FA7D7F550F
+:102B2000628D356E7387C2F4D7750ADF07DA66CF18
+:102B3000DFA07C709D02F961BE46DCB714559EC7CC
+:102B4000EBF0EF4D7C040E5F2716FAD9B3C80FFEE9
+:102B500028A38F38A78F3DDC3F7D04E4BF1BE886A8
+:102B6000C9FF6DDC3F75F63BBD217258013BEC1689
+:102B7000AD1C4251CEF59DD66DB7270A6376393725
+:102B8000D549F78DB9B6FA790D45B6EFFEF06C87E9
+:102B90007D92607A8DB0F5E9F2F8A681DC2EA77AF5
+:102BA00097D9199A18B1EEAB38F47A83CB68562EC0
+:102BB000C2BE09A4451A617D9CF6F456BE3E7F2331
+:102BC0001B5B94F9E8BF6D8527B58F79BEBADDFE32
+:102BD000180527A170CE1917CE872E06CE89F6D9F3
+:102BE0009CFB6B774A915D2FD1E7E274960FD9E198
+:102BF00067FE7C07C45169F9594E874F2912F67F49
+:102C000088CF77711AAD9F82BFCDF8EA73907803B1
+:102C1000F526A7CEB3040B08BFE7A5FEFE9CC2F6BF
+:102C2000B3174F1D7F9CE7611CFADCE632BEAF583C
+:102C3000E278ED8AF1036B39A1B0FDE79175E17996
+:102C400094A63D7687CBE8B7D64F3EED72D3DC072E
+:102C5000C9E6EBE9278CFF5E58B36ECB74CACF4A46
+:102C6000BE0FED9FEC35ED9BC500E41F0D6AE00F34
+:102C700064F37D7CB29AC951735F3DB3CE2E579DEC
+:102C8000E7ADDC3C2FDEED3C67C3E5AB931EC7929E
+:102C9000AFBF56ECFB1A23F1EB31E8CA19BF6E82C5
+:102CA0005F999DC9EDE048FAAA3963D3E3CF9B87CA
+:102CB000B70F4C4F965F82F33329E980ED27060E5C
+:102CC000FFA16E7505ECDBB178DA607362F19BD31E
+:102CD00093F22BB228E305887B466A3250DEAC08BB
+:102CE000FD71FB00F5C7EB8DFEC56F5AE639A851A3
+:102CF00068A78DC32786EB232B7F3D2130FAE9E0BF
+:102D0000E3EDE0F874DAD15D62CC0DFD7E40860C17
+:102D100021855F6B9D773BE26DC8077436D6BCC3D7
+:102D20006EC65781858D6188D3B9CF4BC807EEA990
+:102D3000A6DD1246BB659E3B839DFBF015E13E1E62
+:102D4000F5D387FB611D7C2CBFDFD48FEF9BF15443
+:102D5000AEF76ECB60E5ADCD2C7EEC3E72D96B3A12
+:102D60006DE77FD1453CF4FD162AD7210ED84DEDF5
+:102D700078F81EA8182210476FA3F5A316BFBB2D25
+:102D80005CAD819DD05E5AAEEAF4BB34A702CB7233
+:102D900061B9564DC79CEDFEDAD26C8883178B98CB
+:102DA000575B4ACB2DD4A44B776B38BF9F97BCE9B8
+:102DB00003FB2C1D9CF3F9C9F57455440D89C2E33E
+:102DC0000A69D5908B31A2B7399DD1F78F42BCE407
+:102DD00009215AE9A6F3FF393F7FD5A53496DC0ACD
+:102DE0007E8F1C7343FCA04965FB10400FEDF392EE
+:102DF000702FE1F855F8B8237E105FCF0FE4A118CB
+:102E0000A4B67689A421D5FA5CED6672AE5D33B4C2
+:102E100071E949933FB2E54F2F62FCA404293DA517
+:102E2000883F3AE5357147EADDD9C97C25BAB01A41
+:102E3000F22961F69E79BEE74DC5F89C9BCEA3D5DD
+:102E4000C7E5587E26D2297DBFDCFB89E43E8BCFC7
+:102E50001C5E5471AC06FC924117C68B02D3C8DFCE
+:102E6000462CF2F6A81B836EF4C9ECA4FB287DC4A3
+:102E700067B2B80401BA49A38A18F6210BC4F8A3B3
+:102E800085006F6FED34DA5F973C9D5AE6C97EAAE4
+:102E90000A98FDBFBDDADB60F503DE4D63FB2F77DB
+:102EA000F9AA9E86F995FAE2D5E83E4376E62476BD
+:102EB0007E0AE8F8128D0C0922C8C108617A33AC89
+:102EC00032FD5AA3C179298144C9F9B4F1F4A3FDB3
+:102ED0005CD59372BCD50BF808B278977F9780C900
+:102EE00080529F91F08298F4AD6A77337D5102E36E
+:102EF000F4577A898FD6FF63BF82F6619F3F4F06F2
+:102F0000BC3E2FAEFB26C49F867FE9C6FCC6BE3FF3
+:102F1000CFC6FCFB3EFF15CB406EF709E42855F603
+:102F2000A4EA6C1E4F362469B0CF17586A10D8E750
+:102F3000187E8184213FD815FAE9E237E7E1C4D34E
+:102F4000C485B49D87747B68BBF047DEF79750BAA1
+:102F50007ADA57FEE0A524195731E329CBD2A20F24
+:102F600003DE3A26FD5B03F04D37855342FBD5085F
+:102F700001DCE5D922C61F49B62F3E1DE265478315
+:102F800035903F5A2597616A6C60295BEF5F79A3A2
+:102F90007B61BE355A7D0DC4D72B8EEB2867978594
+:102FA000360F40B9F27556EE5018BF40BC8858E451
+:102FB0006ED5D92938BF3E4E27ED2163D010C6E526
+:102FC0001BC7B9037BBE9C950E20CFDD42075197EE
+:102FD000950E16523A9863A50343B8183AF82A2A70
+:102FE000EB4FC23FC66B3542326E379A0F36AB9904
+:102FF000A5A3F9C584E3BE8ACC20C851932FB4059C
+:10300000F7A25C755FAF44C05F37F9C4E48F8F3DB2
+:10301000237C12017E5FEDD3AF4AC527E08758F9C4
+:10302000E1DA31F86605191E08D2462B64124BA767
+:10303000A2E4E797BD553CC5C2074EBCAD582490ED
+:10304000933679C6CA16BC6A23E71BA50BC7FFCB0C
+:10305000B2DE11B4F06127F543C058EE16C304F494
+:10306000CA02DFBA3F025DCA75DF0B813FE87247D3
+:103070001A306F76C13B693752BAFCE3245187C9D5
+:1030800077E8EBBE8BFC7C228D807DB2BD723DC6A5
+:103090007DFF7853742AE8892D14FF27512FC72705
+:1030A0008B9883393499EDB7EB21F68C86D87BC2A7
+:1030B000BFC779D9E0F586B01E5D679B7CDCE16116
+:1030C000FB5D3B3C4CDF6C517A54E0B7E142554B21
+:1030D00095EF5CA9B2FA4BDCA4221CC4D1705FB995
+:1030E00043956A7B599C2FB184BE5F32ADE451EBAE
+:1030F0007E81D9EEC1E63EB453B6341FC267565D39
+:103100009C40DE95B724A6C3FEB8FA97A5820BFAB9
+:103110009DCDF671E17D8BC54ED355C69FEA5FA468
+:1031200028F0B1DA1AD3332DF2581585682A7B7B43
+:10313000A787C569D45682DFD5C35FC77DEFACE2F0
+:10314000B0F06528B7F69030EDC79360EF83C58681
+:10315000F0254BBFC1BA3E9B3E5C41972ABD1CADDA
+:103160002C3C17D3A17B719F6C45B0FA0FF2DCD1D8
+:10317000F4063F272D7463C26FEED7DECEFDF49ABE
+:103180002215F9B4A349E9C573302AB39F3E085606
+:103190008F7BAE00F669A98587FE303C61BF36366D
+:1031A00093EDD74219F66BE109FBB5F084FD5AF8AF
+:1031B0000EFBB550FE4EB38165D8B78532ECDBC649
+:1031C00066B27D5A28C33E2D3C0F3537E0F3D9E671
+:1031D00046FCFE5C731396293DA0FD474A6221B070
+:1031E000ABBBEF520CC8C7E9E2EB7EC428CA027A37
+:1031F000F104593CC1F3E203782EDA131231BED741
+:10320000197A80DC409FDDF3FDDD101F51BFEBC359
+:10321000A7477E9080DDB64788359030211BD58A40
+:103220001A99DA13C5A1CDD59961C0DBE5ED909F60
+:1032300038436F09AFD39265DD5FBEFE7B96F2D453
+:10324000D25ED94BEBDFD5BDA81DE406C0019B6B58
+:103250006DEA929A96624AB445D4A001F957A8C47F
+:1032600081EEBF04EB351DE06776E067485B08E25E
+:103270001F5375A51CF895D64F303EB9B0FA5DAA1C
+:103280008EEF9DEDC6AB27565C503D228DD31F7C43
+:1032900017C6E9A783B4698314F6AD205BC08EF22C
+:1032A000B0FDE06E179313DD1EF6FC9DC7DC0FAF7B
+:1032B0005EEEA1CFE51EC687DD9E482D9C4B199E74
+:1032C00023621CA8CF45BB80430A4D85AFC0F9A13E
+:1032D0003B7E2213D867D8C3F976FA543FD3E7F779
+:1032E000A8A8CF974FFD767B262D4FFF56380CFAB6
+:1032F000792B097B814E62DB985C79AA625A663D24
+:10330000AD7EC9FC6732414F7DAC32BB36CEFD92FB
+:10331000968E1BA742FCEA8FC7989CFC361FA7D746
+:1033200035D888EB39DF87760D752CD06E6909C9E1
+:10333000986724E6B0A7E2D2FE0AEA29D430885181
+:1033400078943F2F50314E72D6CDEFC118447B4652
+:10335000F144B50CFABE272622BFB769DE38D8DFA4
+:103360005B7DE578FE34562AE33994ADA52CCE9AE0
+:10337000E6FF7C1CEC981DFD1E261F7C2AE699C6E4
+:103380004B0F1EAD0EC253D480DFE3C6AA5AC4BB96
+:10339000266A98AF4A7FC3EF0D413CB7B295F075EE
+:1033A0006910F1DC5DC7A48F7E7A29E4EF7C590BAC
+:1033B000F3BB09301F1C4D3311F68D860FA7013C5E
+:1033C0007F63DE6B30D49A46EBB7AFD3C2B00E73D7
+:1033D000B5EA5AC837E8D0AAD11F4A9B53A35E8FDB
+:1033E0007268E4DC06DE9FD15E2A63BE117C07BEF4
+:1033F00024ED6400CECDE771599696512E801DD6EE
+:103400005187E14038D760CB3F6FCFBC06CF2B4907
+:103410002B3211CE0E62A8503F5627A39ECCF3A9A3
+:1034200009B04BF2CCB82F1CC5B0C425B26EB19F09
+:10343000E7C869906DE7C72747EDE56C1E67C8765A
+:103440009CFB38CBE9C58927E77CB3828F6600BC3B
+:103450005970E0571F3D9F0783E5F530CF3CCD8B7A
+:103460007087B4D62A905F9349630BD0DD45C3EBD8
+:1034700080736E69FB20ACFB5C5D263A1DFF523207
+:10348000DC0AFD6EE574DE5D68D7DB7B54C9E4C7FA
+:1034900030F0E3D42691C42CE343BC3266196F5A52
+:1034A00077A6AD3CBD27D7567FE6AE22DBF759F1B4
+:1034B000D9B6EF97EC2BB795E7F45D6EAB7FE9A13A
+:1034C0006A5BB92C718DADFEBCA3AB6CE5F9837F53
+:1034D00065ABBFE0C43ADBF7CB86D6DBBE5FF1D687
+:1034E000ADB6F295C377DBEA9B76BD532FCEE6F6F9
+:1034F000CDC5DAF36EB84FC216BFB5FB0B4E7B5F7E
+:10350000FD4B9BDE0A722DA0207DCBA0C769F9D6AA
+:10351000BB98BFA52E0EEB2057742E47A9185C0050
+:10352000EB561550511FC83E564FF62D43FB63CA4C
+:103530002E2A8FE681554A46BEA7815C6E8E2D2EBF
+:10354000B6C4A53C5A0F9EE1AA0AD4E23E88D95ED1
+:10355000D60C12F5C3783AB37BA8370BF53C3A6D1D
+:103560006F99D7F3A28847A587A95FF8A8C52F1C34
+:10357000CB0F74FA7D17EAE74D118917CF1F089119
+:10358000467896361EAB86B461EAFFFDB587F2E752
+:103590007625D2D04BFBDD5EE465FBA5DCFFEB2E90
+:1035A000EC43BE182E9451BF10592FB5C6ED3AF911
+:1035B000FAA6A94FA1FF49F18EF2D6C4FB566128A5
+:1035C000DE0672E72E2FCAC329BF71BF0CFCA516F9
+:1035D000A9792A7D1F3EA218B00FF520C76B91561E
+:1035E000560DA1A7E250FD6178CED0A99D419F253F
+:1035F000253B0FA35AF314E178B3C3DFAB0659A2FE
+:103600002E66F69F3C5789B7D27E248DC291C2FFA9
+:10361000309F526017DBE728967F07F406D6FF79C4
+:103620003A85AA4C15F3423C4007023E917E3C414C
+:103630001FEA0D0F1C8285B22CC4619F10EC53D879
+:10364000AFABCADC85EB6EDAAD60CF46993FDC09E3
+:10365000780DD6D9D73B4DFD0EE2A95D60F1F1EEB4
+:103660000CFDC56A3A6E77765126C462217E526F90
+:1036700091373BB83E8D7AD9D39437B891333F69AF
+:10368000EF50FADF254E03F87A08C82DCFBD3D0470
+:10369000E8DDA3D1D544BB3EA647509F327BF73629
+:1036A0000E534DD11ACC03783F588EF6ADA7E9F9E9
+:1036B00094F8F30C49C49837365E033376A3BE27DB
+:1036C000458A0E764593AE18BD29E4C15C95FB3959
+:1036D00053CC73AF2C0FA89BE3C38C9B8EC4237970
+:1036E000DCCD8C479AFDDC965D3E793C7BDC43FD6E
+:1036F000D0A805DE2D741CC04BC7B9FA5AC4834C40
+:10370000D8B9DD3F97F6DE87FBB16D3AEC37CFE5F0
+:10371000F67225E087E27B8A42D04F580AF1952C59
+:10372000F07E3F530B7C69C663863CEC1C773846C1
+:1037300024167F73997A4B3C7F29C2AC2B661E19E5
+:103740009ABC4CAFD17FFBE17CD9B46EFBF9CDE9DB
+:103750003DF6F2CC5DF6F2ACB8BD4CADE6E36017D9
+:10376000808D86F18D7DF6EFF5E6BE410D3B6FA6AF
+:10377000D291CF33FD6BBB3F8770FD6FE6BB15F475
+:1037800025AA40BCE6DF6ED7ABB95CCFE73AF46759
+:10379000B95FC2B843D5D1E000D88F667CE8575EE8
+:1037A000DD967766C6799CF2DCFBFA4E42BFA0FF3D
+:1037B0001E75B37807C4913F2CE071957C1E579914
+:1037C000C2E32A052CAEE292F497D60A9827FA3E75
+:1037D000F20569BC94C573D8B9AFF76AE517049DC3
+:1037E0008D17B58C7767496C3943433C07EA99F1EB
+:1037F00015337E10F01BCB817FB7865F6E3C42E9AC
+:10380000A4FA976E02FD5C25BD78B419E45B818C47
+:10381000F9DDDA825BBEE98578257CA7E5EA427DA1
+:1038200032F2C18F5D1847E8E2746D9E5734E33180
+:103830009A97F181CF6BDA47312FCFDFF782BD7BCB
+:10384000C93E2AA36DFA8EC5FDCCF8DE9C3EFBF77F
+:103850003E226469901FB0262E32FBCAF05559F201
+:103860001F67F3759BBB36F1C05A5A3E40E2E570C4
+:103870002F5D19A78FF080FD9CEC2422E039A94927
+:10388000C7A5709CD69FFB9CFD7BA9E31CED6CE754
+:10389000B95AC7FE915F22A7AFA7E36DD31B05906E
+:1038A000A3DBD6525B9E966779F9BEFD0C3203E826
+:1038B000F02AC9174E007E5F95701FCCFDC6CCD78D
+:1038C000AE07BD7E8CE52769D3F49D106FD67E2AA6
+:1038D000A19ED2D24859992FB9DFF40FE7C304F65D
+:1038E0004FCCF8D793745D41AF1CA07E79B10BFC2F
+:1038F0006C0DCB7DD42F87F2D3D42F87E741EA9785
+:10390000C3FB7FA67E39940F51BF1C9ECF52BF1CB4
+:10391000DE3F47FD7228DFE5ABC278F920AD0FF43A
+:10392000E22D3BA84EAB0039ECD2803E9C72A8AA97
+:10393000EA36753525A92F743D85FB1CD557B17C1A
+:10394000EAE5F73D85FB1CD6389C354E998CC30DB6
+:1039500009661C0E42A3BFE6FB1123F1B8288BC7F2
+:103960004DDC8F61F683F1CF51FDF038E8BB77FD78
+:10397000DBE36DF4D386F90F747B8BE07C47238FF8
+:10398000FB99F933BA2D3F7FC3C116CC9F51728E7C
+:1039900037C2BA1EACF0615E89E28A6A206F9DFE72
+:1039A0009CE9C739ED69F3E9D46F7E6E5798F1D57C
+:1039B000ED2E82F9D43181DA13605F34C717BFE985
+:1039C0001A3BEE7AC25BC4F3F8EC7261E41C018F1F
+:1039D000FBB8C19AA5F354048E0F9EDF8EA2B18866
+:1039E000C5FFACF1576F711C0FAF7B7D06DA750216
+:1039F000B5F7D0FED3A22188A375C2B98114F3DB39
+:103A0000CBF9BD2547417BA33387E58BD4E48743BE
+:103A1000D0BE2DA732643D47609E7318F057AA436D
+:103A200096FE6EF5178DABFF24AAAFF571F4B5E4E1
+:103A300066E77CDA0E5FA6C2F98D6EDFBA41F0A3AD
+:103A4000BB43418CD3F7E75492214BFF5268219E30
+:103A5000F3907CCC1E96422ADAC332CCBF3459DFB5
+:103A6000ACD7C2E53E65678C2F7A7C3D58CF2D4799
+:103A7000F07E09771054267D6A6CDFCE5B2C12D560
+:103A8000222FCC71EFF63279D95D1AD520CED21D16
+:103A90009275382FD2AD97239EDB389EDB0A4C7B84
+:103AA000228C76CCF7B97C35FB69E37180B60605CC
+:103AB000EDB948538656938579BDDF017EEEF6B5A4
+:103AC000AAB07FA9E4548CDBEFC084FD964DAA997F
+:103AD00087FD7E1FFA55FCEB34E8D735C6F9A463A1
+:103AE0009C1E3EA9DDEADCEFA3D086AC792BCEA7E5
+:103AF0009FDB9FCE761B4A871458F72D8FD9CF3383
+:103B0000BB083BDFB5F1D066E4F3EDF220DA51DB20
+:103B1000CF0929CF8985D204CE6F23FEBDCD0ECA31
+:103B2000E3FC94C7BF03A981BE284BD8ED96794723
+:103B3000EDE5F983F6F282134E3BC87815ECA0D57B
+:103B40005CEE0D5279CF92668665C0472416AF02AF
+:103B5000B8EB495F0BE453B8249617B29AEBBF95C4
+:103B60005C3F06D23210FEBC06AFCDFF24FC3EC047
+:103B70007CDE7F41CDC0E67610B211D3AED2D16FDC
+:103B80002DB8FAE92A14970EFBAADEB09FF75FE979
+:103B9000B09F9C765695DC8B79BBB98EB886B9EF11
+:103BA0000BF3847B0F9CE35FECB8667F90AF05F26C
+:103BB000CDBC0F06EF1FA6ED0BE48410A678CA6DEE
+:103BC00064E775F26E27466F0A3A5EC2D77D14DE4F
+:103BD000624B106F4BF9BB5C1FBBC72BB7468AEB20
+:103BE00074FCDC863EB40756DD42E78376F879CC78
+:103BF0009731EB6766F4E1B9A5DD7502CFE325687F
+:103C0000D798EBBCDBC7CE19D65F29C44568DF580F
+:103C100084E3235C45C9F5A5783AC9F0C4F212AF34
+:103C2000ADB59F87AC77D82F263DAC74BC3FE96516
+:103C3000FBE7261FBC7BD9891953281C1B849EDAFD
+:103C4000B46917AE2F2DFCE13A0F7C08BF4F6229F3
+:103C50003298EFABFE9386E74232861E269424AF5D
+:103C60004D23B19A4584FC8B77F8128196FF6A6BDD
+:103C70005F4777011CF31E7E0A8C3C77D73357D5FC
+:103C80005E992C7BEFEBC772908F035B906CBD2D20
+:103C9000F7C350D4C5D3187C5B0DB253821C5C5162
+:103CA000DB192E4CB6CB8476C238ED2264A79CA2D9
+:103CB0009DCF6C47D1D509F73FF17979F97791C359
+:103CC000631D5F06BC69BA0FCF3B2E9335D8BFFA90
+:103CD000B4704C9A68DE51B2D3356D743B0A768B62
+:103CE00009BF981AFE387CB78EEF1A07FEFF6E7C6C
+:103CF0004CD49FC2BF5F347CB47AEBA4B1E70B70A5
+:103D0000B9F05E22DD275AFAD9D1FF278C8BCBD7A9
+:103D1000913084BC6497A1C17E5EA9F610FAF77257
+:103D2000468D0676C0165A063B604B5F0FC6BF4BEA
+:103D30008B1FE806A22F4D7809C8833944CB384041
+:103D4000FB9DA3C970028BC8570E88104F279F2573
+:103D5000985F92DEEF65F708155EFE2DF0B7323200
+:103D600054DCCF48CBA8FC16337A599CD9843FAD9C
+:103D7000EA7835C4DFE57A1216002E214EAA80C9F2
+:103D80006611DCDFF01A07EF84F3024466FA09EFEC
+:103D9000D201BDCAE3ED9319C9906E45ABC73C97FC
+:103DA0009FC818C79A0C578551A22C2DCDDC09F05D
+:103DB0009446690702C0CFE26573A2623841FB2FC7
+:103DC0003FCDDA919FB17326D43759F38C2F8957A1
+:103DD00053AE4CE671F8D05A7B9C9A0CD339D3F68B
+:103DE000E53F5BB517E2149346C96FE6B77B399C94
+:103DF000E9A74904FA0FD6D9F58697E7797B1DF72D
+:103E0000CC54F85DF6FBA19DFEC35723A807DC2424
+:103E1000AC2A685FAC45BBC1F44B764345B0C70BD9
+:103E200008BB97D7D9BE92B52721E6A7B8BD4455A0
+:103E3000CBE9F7F55E03F312DDB44CF1282844CD4D
+:103E4000A1EF7345166F6911880CE5E47809CC473A
+:103E500070AB9F6907FBE5B03A0FEF4F33FDEA36D1
+:103E60002D8CF912A4A4DA66379B7961B796154DAB
+:103E700086EFE99346E24E1AD0E5ADD9C56847070B
+:103E8000B286FE1AE4ECB9ADE9CB5490AB90AF71B9
+:103E900039E4477B3B6354E9BBCFE611DD629FB950
+:103EA000E5468CB3B9CF4EB1BD4F34DBCF5B1B3E83
+:103EB000B106C699EA637C5845B476685745ECE785
+:103EC000AADD67736CF67AB2FF7CDBFB04B56BACE2
+:103ED000F7008DDD7F1AD14BACFD4F1BA3FF198E70
+:103EE000FEB594FD27FBCDB2F5DB21B3F86B2CE8D2
+:103EF0004D792FE5025F75311C951D6B7FA0D2C7F0
+:103F0000E29A5DA146DC1FA82694F129BD2C3977E1
+:103F10005262E77D09DA6F24DFBE3F50CDE958A435
+:103F20009481E70764FBFDC68B89F3BE63BB5DF438
+:103F30004B8839507C89FE8A41DC27F8930FCF03E8
+:103F40008E65370F36138C4F2F4E1BBA0DF6C157A7
+:103F50006ED3958E10E63DA33FFF37DBE62F033B84
+:103F6000DFBC07B32328225E22D593F13C97D94FBB
+:103F70004421D3412E46449607813F74FCC1EC5C3A
+:103F80005BBE86F9749E87AF3784C5C596790D42AE
+:103F9000FEA175BCA579BD92651E1137998FE3719D
+:103FA0007B7764BC499F6CBC633C9E658E57BFCCDD
+:103FB0003EBF7A45C3F9D5733E36C73B06F34B8106
+:103FC000DF09C7E3F99523E32DB7CFAFDEADE1FC01
+:103FD000EAF97DBC23E34DFA64E399719D2EA5B106
+:103FE00011E870ACF88E19D7B9B66BBF2DAE43622D
+:103FF000FB97561513B25360F223EEABEE04BA787A
+:10400000BFEED612D42BDCBEC67B57A93E5E293349
+:104010007857E4FBE22D163CEEA672C49809E72916
+:10402000540207CFE07C8581E72D42F87C94DAEBDF
+:1040300006E69794E0F7C79BC358DED7BC109F668F
+:104040003F250BD9FD60B3160929EDF6133EE67F37
+:10405000EECCD1AEFB12E8B72A2FCB0B5E78053140
+:104060002C763435AC0F7B607FE8F3A40C74E48CC1
+:104070005D0CEE60CDA438ACBFB76C60B019E2A0A7
+:10408000B24BC7BC583DF5DF3B78C5C7FC79B79B41
+:10409000B52757B07B525770FD44A43ACC3F5AB174
+:1040A0003203F31156AD36FC1AC5DB6A4178B59878
+:1040B000EB3B381FF539BED44E7F21089A87AE57A7
+:1040C000D090E2708FDCE7F25F5C23D07E23FE6B42
+:1040D000D1CF88D08699B49FCF717D5BF5869B4008
+:1040E0003C825CA5A0FC5ABDDAEE17ECF42434B097
+:1040F00073769605490B6DB7AACEFEDDED667C158D
+:1041000071DC13B362827B63CCBC5C277E9C71D371
+:104110009FF9ECF1D133A474079E0DE3F9BBCEF601
+:10412000661CB4DDC7E45B97C2E4C3683E60F0BCC4
+:104130000B7DA3FF7702E368267CB9725C00799F50
+:10414000D770C2961F4F118B46B5B94F40A4036577
+:10415000A8871DF3D92D1CC819EFDEA85C22FF6EBD
+:10416000A884FF7D0361F4BCDF1935EF452F15935B
+:1041700054FCC3E2C12B8E4AE1163D8917130FFF91
+:10418000DB7CB4CBC7F0F9D2D20F2A981F986FFB13
+:104190003B02E639AF6B47CA32912DF4BC72BD6267
+:1041A000307F75B814E8F2F8956961F6F730B81DFC
+:1041B00094F8A50876D0A7EFDF28B0E53FF37EC7D7
+:1041C0005A2F67DEA5E55C72F29E04C87F690987F5
+:1041D000D01EC81609F0532EE4E305D8F79376BB3A
+:1041E000D5968FD7D6BF5F80B8E1C3909F68398FCF
+:1041F00097D7D02774807DD71267718804AD47E1C7
+:10420000CE6F4808EDA5C9BC2FA75CCFBFC59E2FB8
+:10421000D8B168B5764087BC9AEA1EB8206CCB2E20
+:1042200016E732EB8FC4BBF83955176924704E433B
+:10423000F2B1787388DFDF31519EEF87624C2B2C0F
+:1042400084FCDEB85A45E7BF272BBACC4FFBED0EF6
+:104250009637F6027DCA61CC075FDB744F04E284B7
+:104260005A56EA38F85A6E1FD4FB195DBDEE4A144F
+:1042700040DCFCE5ACEA7A7F768AFA4D5FC5FE1633
+:104280008F712FFD7A3F8BCF3C2CA6960737F0EF2E
+:104290005FD820E27D431EE2C773AC9EE29E85801C
+:1042A0008F8737EE0EA73A8FB9508BAEF35BF0EEE7
+:1042B0002966F70510D27719CC73CBC78FF47D9799
+:1042C000CE3BF3631FCAD94C89F56B69BFDE3A1F39
+:1042D000B3FDF37FFA059EB37F9EDFBF4EC8F4E5C2
+:1042E0001067DF3E52263138E8BC3D839763E272A7
+:1042F000F02B93E5E796554119689412DFBBFE97C2
+:104300003AE1FE9AED02E1C43AB80CEBF3FBDE7F32
+:10431000C2BF2FBEE69D6FED007D50A9A0BFB99D25
+:10432000DB3B267CFFE967793FFFC9D7652C7C6EB4
+:10433000E3DF7D80CFE045E1735B2A7C7E26686CFD
+:1043400087F71EC804A120783E566F87BCECAF37B4
+:1043500093C897E81C1E0E1FDC0F678F68FB8752FF
+:10436000B5FF4196F1353FC27312E7E72FF685019D
+:10437000155B1610EC27051CDF186F5DCB33989C7E
+:104380004B4B67CF4C6E5F4AEEC110E42F6815FFB0
+:10439000709B46E54C67E1E09A5471E2A702CCEECF
+:1043A000CF18232E7E98E3EFEACCC8B701EE76ED66
+:1043B00001F4F7148144A0FE96854344B0B47B23F6
+:1043C000C0E897C2FD0CC0AD5CC6EEB1F653BC436D
+:1043D000829CBF82C1BF453F4E204FDE1F3A8E797F
+:1043E000ADFE8A21E4771485B98CAEC01F54B9FDA7
+:1043F00076D8FF26DAF5999249777774011D4AC974
+:1044000032D2656F266BFFFBC01D5DE02FEE516859
+:104410001B9083B90ADA37CEF9FD2CC0E6A768C62F
+:10442000518077143EDD43DF827B09B64F67F7B9D1
+:104430002C1607D7DC0074798D0FED33FA7E8DF5DD
+:104440005CFE479C7F3FF233FB6AFB9F54FCEE5CB3
+:104450008FB1E8F5246FFF09E8F5642AFEA5F4FAA8
+:104460005B786FA1D70F486A7A7D7B0C7AFD0F6865
+:10447000EFC48BB32C116317EC2BCB1F2DDB07FD87
+:10448000C99F59B4EBBBF4297DB42D86AB19166CCA
+:10449000E79E93F23EFA2718D7BC7FC0FC3B46CD7F
+:1044A0004008F353F4BBA07217C8B10BE8570E6471
+:1044B0008FEEF7653F8377F135BE68AAFB14BE1314
+:1044C00090D9F9D800AB3716DFFC3AC0F253C6E2F8
+:1044D0009B17381F50BE0906E64FCC3767927C9376
+:1044E0001FB820BE79089F9E62C63738FFCB47F3BE
+:1044F0000D89ADEB02F9DA59C8F862CEFD9B902F19
+:1045000046F82816C3EF52B28CF2DBE4A38FEF8F8C
+:10451000617D67FBC018F70656707E5AA845E60114
+:10452000FE8D4BB476768E6908CFEBF692E17E373E
+:10453000E609B3BC5C6F2C6630F36090C0FDB48BB1
+:10454000381EF6808F067E50258F67C98364957F5D
+:10455000343FFB2B1215D67B605EE1E3FBD2234B8D
+:10456000018FBD646816D86763AD532D1F4FC832E5
+:104570006A0329F87F223DB421C0F4D0063E6EE6DE
+:10458000C76A23D8A74E7E5FBCF1D93F3C3E4E3F61
+:10459000EB391CEB029F585FAD0BA4D6573704ECE8
+:1045A000FAAA42284AC9FFEB0329E407E5FF9B5317
+:1045B000E1E553F0FB9D8114FC1E095C18BE9FE5EC
+:1045C000F87EF653E27B176FDF13F8C4F2B62715B7
+:1045D000BE28BE7706B22F08DFBB52AD17C5F7D78E
+:1045E00003B8FE4F23FC7EDD87F1F2EE05E420F4F4
+:1045F00093028E5E6B3FAACEFAA13CF58140E97E24
+:10460000F147DDE154F724D176FB52B5AB0D683CA0
+:104610000EAD6F06FFE1E1CFF8705F81EAC703815D
+:10462000FF5EB97F28151D2C16991CF206167581A0
+:10463000BEFF14FD0FA492FF5FE57436915DF01A82
+:10464000A70B3AEF9F029C4EF9D7CBCF312B5AF4F0
+:10465000E500E26BE86A90577BEECE1420DE956FA2
+:104660002404F0138E723D560597FDCC4FB6DB2324
+:104670002704B867674FA326C079294B7FAF07B2DD
+:10468000C7EECF090785EF3730BE2FDD188276B52C
+:104690007C7E176B271DC934DE0AA0FE89BC0D4F36
+:1046A00063A65D6E9BF310233D2CCF7661EABF734A
+:1046B00079D42F9BF2FF7DABFCFF8F11BA62FD5DB9
+:1046C000ACFEA1F09DE3F0FD25157C4EBC4C04E74B
+:1046D000250199EBDB889A9E424F39FB33FDEC9123
+:1046E00075029D6489FB64A78FE8EF603AAC478749
+:1046F00088E7A8567079B2626106B7DB352FF4FF00
+:10470000308FC33F7CCB0355B0AFDE7BAF5606285E
+:10471000C86D607A4FBF650AC657A7F27E9DF08FBD
+:10472000B457FA66C1DF8FA0E34E83792C59441247
+:10473000E037A683DD80F10A0DFFCE71A6BB27040A
+:10474000F1D92D42CF9A75A057AFF6B17331A1D5EB
+:1047500013DC9FD96AA35B12AA98A07E0BD6D7D28E
+:104760007AF09E950BAEEFEE496967D5A48B9C9EBF
+:10477000A24BC6C56B2888712F13BFA3C761EB5727
+:1047800015691400DFFE0A4183D43B3FA513B0979F
+:10479000C4E241CC9BFA6C05A31742FD92F1EF698C
+:1047A000E934E15A0578FFB47099F5C61E8FD773C6
+:1047B0009CB718F97B643E26C7B0222DBF77342BF7
+:1047C000E5BE82F9EC6AD60CB832F93D4DC7FB1B49
+:1047D000BB46F2BEC3A155FEFFF97AC979C5597C23
+:1047E000D4517FE49E92908AF61FFE9D0FEB7D3D93
+:1047F0009C2ED48C482C1DE54A18EF89A4E5565808
+:104800000FA2D2B21FCBED58D646CA9D583FC4EA7C
+:10481000134DBB20BCD376DBB11F79A49F1DD88F6D
+:104820006F64DC9D580E8E941FC4FAF9ACFE858E21
+:1048300033EA9E964109E7FF816CA4C3BEE9E79B7A
+:104840006EC0F8D2754D37E1B3BB59AB82389D7954
+:104850005FC9E7AFBB41037FFABA2F3F88FBFA6617
+:10486000FF2BC1EF00FED7E55AB097944231F29882
+:104870002FC97F4938DAB1BC4266F7FEAF5C787A5F
+:104880007BBB257EA7C2DF4F87FC1ADD725F06491E
+:10489000CAC32704E37BE91741CFA3E749C800A5B2
+:1048A000DF0F7CC5F118D273B5968A6FCCF98ED51F
+:1048B000BF39DFB1E48D8937F3FD9662FEF7761DCF
+:1048C000F14BCFF41ACCFF59297038FDFCFE485E3D
+:1048D0006F051DE7E952A40B1DE87605F7EF9CFA7A
+:1048E000C11CF709217A02E804E2C4F7968FC6EFEB
+:1048F00085E2CDEC7F723446E0FE2E6F29C17DB19A
+:10490000A0DFDC576772ED219F598E617249A4B810
+:1049100007E59C4737E51ED3935A5A9F2196513F8E
+:10492000A887D48666411E6834047FEA87968FCABA
+:10493000684FB0321DFEE800DA3FDA6CB8F1516D15
+:104940003FF7A3A35712767411F7DDCEFD08F5B734
+:1049500059860B7C4B68D93B5236D4102D178D9459
+:104960006350DEC3ED3EA1E7DC8F60CF84EAE573E0
+:1049700056795FC5E5EA44F2F4BF00B9E905CA001B
+:10498000800000001F8B080000000000000BE57D88
+:104990000B7854D5B5F03E73E695642699BC270490
+:1049A000C8090F098A38090482623BE1D558790C9D
+:1049B00015359628938447782620D5B1D2322180A8
+:1049C000A0D886AA156BC509C57B69AFB6A0B4E5AA
+:1049D0007AD17F10B4D0521A2B55B4A25150F15154
+:1049E000938294A9D572D75A7BEFCC39273321B45F
+:1049F000DEFFEFFF5DF874B3CFD967EFBD1E7BAD6F
+:104A0000B5D75A7B0F6361C6721963DE1CC6C63107
+:104A1000761EFF7CB967C944BB366DAD67C268A816
+:104A200079ADBEA11A631BF15541BC5D89C74EED3E
+:104A30001ECD0CA67BCA199BBEAACBEA8476CEE219
+:104A40001C77D0C55891F79370257C5F349E310D4B
+:104A5000BF1D9245E3B679572A769842DB08E651A6
+:104A600018BD5BE381F6396EC6DAA164D60863230C
+:104A700018BBDF25EB301F28032511D601CF533596
+:104A8000FEDE827578AE3A58D34EA8A795307F04E3
+:104A9000EA1E079B1380B2D863610CE6E5F3A834E5
+:104AA0004F1F8E06F50CEF5AA6417B6795C51F81F7
+:104AB00032034B971EFEB5E23B2B95121FD7E6043F
+:104AC00047209C6D8C55EDC479B168A004E0481D69
+:104AD0009E937537D42A4BAC2B190CF9E86A1698BB
+:104AE0006B63ACC21348C3F6AED29CD4E008AA8F65
+:104AF000F2403FAE75963003BC54327744298EE3C2
+:104B000005669E1A7027A7C7CBAB838149B6E474AC
+:104B1000BBE12635A087439653100FF0FDC7D5EFB4
+:104B20007C1FC159EAECB2B34140CF219B034C45F5
+:104B3000783482D3B97B66B410DE2FDBB39CE17C82
+:104B4000D7A4A58F473A9AC77DF9B3073D01789F4F
+:104B5000F25747606782F196083C1F5D5D4DDF416B
+:104B6000F79A358FB13908CA204604ED7062C994AE
+:104B7000F30E02EFE810787F0BE3CC302B503B8D27
+:104B8000015EEBAA55A616E377DDEDD979A8DFD251
+:104B9000513B958D844AC876129F3BE1EF79E83707
+:104BA000C832A778E0716D983FA7F6F0DF3CE69B2E
+:104BB000920BDFD56F303D7FFD9AF7593ABEB79E15
+:104BC000EC2889F77F63756D6092687786FE1F21F8
+:104BD000786669CC8F749BE54B8B8401C4EB0337FB
+:104BE000052695C4FB7BE573750EE2C58C8FFF44EB
+:104BF0007CE4223E028149437BE2A32EA0D83DDA29
+:104C000085F1D2573CD45A4BA7E46A3DF160861F28
+:104C100030762FE2791EE0F9EEE2E4F88076448FF8
+:104C2000576E827600CA1475AACD0278A89FA93063
+:104C30008742F84D6783B19D7FEA64DD7CCD78348F
+:104C4000E3ABFE19E68B42BFF50FB87DC0E1ECF790
+:104C5000123F5140DA189027BCA91ECEB771FE1E34
+:104C6000F88B707EADA2F4F91C984770ADE2631C1E
+:104C7000DEB7F5F0D5B140465421B8DF4E42F7B764
+:104C8000F5709AE7679E7F0A0A2B907FA1D78BBFAA
+:104C90007340D78E59A323029733F6538F3BE7DD3A
+:104CA000CBA03E92F9CEC3BA3ACBC6678CC2F743CB
+:104CB00012CBDB73ABB5EF1CB0E9D739E7B339A141
+:104CC00099DDE362FF0A0B76D73D80E7C04DEABD70
+:104CD000D7C3BF5F3E98BD0E9FADF0AADAC96CC4C2
+:104CE00017C04BF4F23326F98B6119DEA702FE667A
+:104CF00032A7E6827EBE0C42EA3CC032DD9FA2B9FA
+:104D000074709C6E55AA508E02F132665D1E87D774
+:104D10003CEF155E3B8D07FCF8899E1FCD7879B975
+:104D20007A7006CA9117112F69849791178397AFEC
+:104D3000E0628675E3C9665105E8DCA53823DB60CF
+:104D40004E35A13B039346215E58D80EA2F35D4F2A
+:104D5000B190D31C6E1B937F9A18CAD31A3B0B22B7
+:104D60005CAFDB58F52E1796D101653AB9F57E7622
+:104D7000E5BB28A765BD26F46DEA1F1891F850F22F
+:104D8000F32D4E5754E57CF85137DF903CABF120C2
+:104D9000DD814EEC3CC0A9662CD1106E352D7D24F2
+:104DA000CB606C033601389D9981D328FFD5B4813F
+:104DB00011E4BFD49B7EB481D3F1BEAA1B74744CA2
+:104DC00099F754983AD7B20CF84F13F4AB14F44B4C
+:104DD00029719AE9C7709D864B58E43145A000EAD5
+:104DE000A787F823B86E93E90D49CF9412EBA71D5E
+:104DF0007ABE66AD8457494776607417AED7A0D7A0
+:104E0000CAEEA6F725849FA047E2A7CB86FA644E98
+:104E1000C8765ADF4FB0606EA419BFDBE8F0E1B38B
+:104E20003A8B9687ED004F1ED4E3ACC4E7C3F5C3BD
+:104E3000C2F09DE427C42B1A13BAFE3B00868232CF
+:104E4000EC0FA4277EB74137CEA09EE376AF2B733D
+:104E5000BFA6EF5415EC07B2237C3E9F4E7E0FCECB
+:104E6000E4F6C369EFE89D9641C9F157E7CCF65BDC
+:104E7000B3E3F5B70B9CD591047A40F627F5799604
+:104E80001AF45A10B6F063070FF4473DECB9142436
+:104E900019BBC71639787000431661AC1FFE2F721C
+:104EA000D0EF22BB43D4813161FE6DA9DD75BFD344
+:104EB0000BF541DDF530D6B7C270EC4AB05B32235A
+:104EC00007D7C27CCE1D7790FE3A5D951AC1C59377
+:104ED0001D9AC84EC0BCAD60E66400AB4111C6D29D
+:104EE000192A2478142B600EF09DADF914C4F7AC88
+:104EF0004C8DE66FD558D40D93CBB6FA14C4D7F7C2
+:104F0000ECAC41C88DE13375F6CB2C01AF1CC7E189
+:104F100064E194B278BF606135A31EB14E65A457B9
+:104F2000609D93DD26D7B7EC2798C9F567F7FABCE3
+:104F3000F07A0E662658CF872D4D6F7E0BEDD95F28
+:104F4000ABEC3100E566EF1DF4FC86503D953785EE
+:104F50001652B9488CF70E0B2ECA84B2BDFAA59B27
+:104F60006F07FE6DDCEDF0A15A5E7ADBFBDF29D71F
+:104F7000104F4077FC6E5EFD03E5F0DE3ED442F656
+:104F8000EC8601AC1AF9C9DEAC907DB451B357ED93
+:104F900086F2A18CCA2D993A381ECA98447556A536
+:104FA0005990CF5738399F9F3B7E97B70EED4A9760
+:104FB0008BD68BBDB9F8BB16A8B343306F86F2838E
+:104FC000919DA13A78797726B753EF16F85E93C989
+:104FD000ED3D670C89CCF9BA09C6775AC30CED6C64
+:104FE00067CC4ACFED0ACC2F019FCAFE9C3158A452
+:104FF000A3703CF3F7767A8E70E1F76A3633D83DCA
+:10500000F7E1F7B958CA79A4F179649BFB49E7CF76
+:10501000C5FA33CFE34F9E890F227E1ECAF06FC9B7
+:10502000A475D36143797E8BEBD7C794917D91C7EB
+:105030001D0ACAE3E99F29D122C05F4AA51A595324
+:105040008C7ACD336D34F001ABB4F9109FED43721F
+:10505000DC8374E3FF44D0FF45ABC78DF30C4C06F3
+:10506000BB9AF89BE5CEC27E26D78FE1F20F0C2EBD
+:105070009D9E7D51DBBE6110CADFB08DF64B739CE7
+:10508000E108CE4F67B729E7B95CD6AC63E2F6DF3B
+:105090009C49AA3F25BDA77D07DB900364FF4959C2
+:1050A0001E863A7CF786A8BE39E9CCF5084607F398
+:1050B000D807E9ED41DC2D8D41FB86FF991332DAEB
+:1050C0007D66BBB0AEA2F4052003E02552351AF987
+:1050D0006CB885F8ACAFF632639B399D27B7787012
+:1050E0005FF528CA09A84F9F746212CA8D19605AC9
+:1050F00061BF3326A99E28B4DE14B2303F4CFC8831
+:105100005F8D2800DB91928E435F46BC55D834D228
+:105110005B25ECDEEB72F0FD280FE23920EC106825
+:10512000CFF59BD719190ACFDAFD275CF53ABE3BBC
+:1051300052716238EE5740EE3524E227C69A89AFA5
+:105140000F7C3395FA79F37E25E280F94F563FFBC9
+:10515000ED58B467BF65F3393402CB82749DEA63BE
+:1051600062E3EA774DD6D9012758600CD995A5C7D7
+:105170002B1D68BFAE53689D4AFCCF0919EDCD6069
+:1051800013D8655A4FFB143AB3233FF7D53E35DBAE
+:10519000579F650A7BB38C95E9EDAA647A4ADA5584
+:1051A00056E657B3F87AB2A2DE9D0E0F12C9819A65
+:1051B0000CBE0E26AB1F117D4E57A81AE2EB48E835
+:1051C0000317EEC78F7CA6F27DB03FD760C715648A
+:1051D00071BFC0563B1864F0DDD67ECE483374B53F
+:1051E000EF9B97E677107DB407C7231D7F6D2339AA
+:1051F0009C6CBEEE90CA8600634E0B29544AFA1589
+:1052000085529855A71F8A58E2F95F9AC5F7A1B948
+:10521000AB9845837133C3CC9F687F2CDBC1BE78CC
+:105220008A9551FB6826CC6FD9100BF1A7DC1FA71C
+:10523000D8C2FE4280DFB6777918F7C945303F9C67
+:105240008706F3437D591C4AA3FAA0503695834341
+:1052500099540E0915D2FBA1A1C1545E122AA6E7EA
+:10526000C3429751BD24348ACAE1A1522A2F0D5D51
+:1052700045E565A037B1DD885025959787AEA5E750
+:105280002343D7517945682695BED06C7A5F1AAA18
+:10529000A7B22C544BCF478516537D74E856AA9776
+:1052A000879653392674279563432D5456849AA9BB
+:1052B000DDB8D03D54BF32741F9557853653393E03
+:1052C000F430BD97764BAA588FF768733DE8EF002E
+:1052D0000ED7908F93ADBB85595C0FBC98E99F8921
+:1052E0007C27DBD92DA0C75D3DDBCD136526D235EC
+:1052F000417FC12CCE971FFBDEFEFE3016A7DB469A
+:105300006FEFFE0C56D237BF57208BCBAFADD676A2
+:10531000BF8AFCDBC47C6178346DF48B0ACA973693
+:10532000CD5A95C8BE7B28CB46E33E9A196CCA82FB
+:10533000EFD38A4F1E40793223ECF9ED04E4971144
+:1053400039BF9E00FD15ADB5D0765F639E7DE85FE9
+:10535000D32631928BD2AF04769D419F6ECE92764A
+:10536000E3CE8383683D0D29E3FAA7E31A5C5FF679
+:105370006F0EA2FDFB567B54B1A27DB38231BDFD01
+:10538000BF757DDDBFE1FB787F7C7D166D60CFA1B1
+:10539000895DDCAA4D488172F016FF7329F0C9D0EF
+:1053A0004870422AD487ED083F87E5F09D9109694E
+:1053B000505EB627FA1C6EE32E8F764C7041FD8A44
+:1053C000836C3F2EFFD2766DA21BEAA38EF9F70302
+:1053D0001BB0F28EE0C4740DE713694987F96C7D48
+:1053E000030C3DA8577CD4AAC276284E7FB0E3D0E8
+:1053F0007E9374718F6E9F940DFFECBFD253AAE21F
+:10540000F7D68E94CC113DE9D38670239CA0471E1D
+:1054100003B8FAFBA38A47C727CF08FE003AB42196
+:105420001DA45FB26D6D16F925DB523D953864D72A
+:1054300064E6D9A6211F5B094FF67583C81F27F9BB
+:105440000EF06BB067370B39B1B5DBDE4D8CDF6723
+:1054500010BFE5FF3AF89D9AC5D74332FC3A915701
+:10546000C65D781D1F117C08EBF8D788D764EDCE98
+:1054700008FC9BF1DC6661074157C1B8C0A77C5DA1
+:1054800031F4A37D2CD6FB85F07AEA5F0CAFCF0B0D
+:1054900039910CAF4CCB213909FC3A1CFD63C9E4AE
+:1054A0008D5DEC67CCEF3F17FCA69373DC6FEB01CF
+:1054B000393738B99C3B7421F925E48CDDE4DF49A8
+:1054C000CDE6E3557802CEECF2047E6A1137907E89
+:1054D000EAA9AAA712E50D1BC6C88E4E1B1109E347
+:1054E0003EA528AC95A9D80C8532E2B15F09F91F19
+:1054F0008AC1CEB002FDA1AB28964ECD63A943FF71
+:10550000BB5C6F9E5AAF7EBD497D1F5F8F922FB2ED
+:10551000DAEEE67E496D26D82FD764737E8BF7C30B
+:10552000FD20EBEFE8D776B74E0EB679BD5497ED78
+:1055300093F1EF02F1BE6DED1AC2A7737C62BB61FD
+:1055400062B62AE441971FF93CFC25E6417B2673AD
+:10555000EDDB249F32413E29249FF8F8FD43A9FF4B
+:105560001686FA84EC3C21CF3DA937B8FFDFF173F2
+:105570003EDA54A807C67BF6A918A7013DA4E13A74
+:105580001D0F731F8DF8B213DD35C6E9A88D6711A5
+:10559000B47B016F51DCB7872D6EF233D9EDAD7E50
+:1055A0005CCFCC9E49F057788233B37B91379E34E1
+:1055B000AD14895A97BDEB1A17F0DFFA624F2AD65D
+:1055C000E7407D53058C9BD5C1447DA36BDC3FEE4A
+:1055D000F7A8BBEF6787D0EFB13FCB1FCCE67C5D70
+:1055E00087A57F98C74AFEEA3EC6C1E4FA8CAF277A
+:1055F0004FA95C4FB523481E2EC17E657FC9EC9B29
+:105600004BB2B99CFB56B6C5C0D73DC76D36AFFB94
+:10561000BED93762BE8BB37B5FFF2F1FBC6FCB76CB
+:10562000A6F337F6FB7EBB55437F06F7D3589CEDB8
+:10563000D49F5BF81BFDE86F043E700EE175FC9390
+:10564000C85F9C1C8F119AAFF4334A7F62BAE02B7B
+:10565000665522A8C7D32B3CD63AEAAF837D0DFA14
+:10566000FB81C0935CD728B79E1C817229CB8AFB33
+:1056700075F427B9B3E2FD633DA32C2E9F98D8C7DC
+:10568000DD2AE6DCBAC697812EE7F011EE4769FD08
+:10569000365F97D3FAB3C81A94137EA679A07D0A11
+:1056A000937FFC067FF2D44F15E687F91FFE54A5C1
+:1056B0005219C2A26ED8EF4DF32951DC07DA2DCE74
+:1056C00008EAD2CA7E4E86F14D7BBA2582F111FBE3
+:1056D000DB0AC1692F4B8BA0F09BD4AF2203E39868
+:1056E000670EEF770513D0FFC660ADC1FF65C663D7
+:1056F00077BB9B9FF7201E1FBE409CF65076779C81
+:10570000767F36DA4373BBD6DAB5789C56C61F0B64
+:10571000BCBB3756A2CA5AC2EDD37E2CD2ACB7ABB3
+:105720007471D0DF22BF3F1C8F83B65FA28F833698
+:10573000F6DB8BF6EE43DD71D06014C7F567EF2C16
+:1057400045FE7DD8B7FBC7DF457C3A44BC62D471C7
+:1057500097867EFAF2FDB908CF6F4DF397A5F4E373
+:1057600099F7C1C7B38DF18533BEEB32A2C45BD9C3
+:1057700009D7B7F42FCAFD30FA0F3D09D7A111DFC1
+:1057800072FC1A85EF6B994DE1F24FE851902F9D15
+:105790002407228CF4A6DFA16C437D73C637CA4769
+:1057A00071CF24F246CE07F0383451FC17C64B189F
+:1057B000674DC9E17AAAC6C6FDA6CAF2F2269C5771
+:1057C0008DDBA53874FEFEB342AF9BE3426AC66729
+:1057D000E541E1F74E04BF39BE7356E80BC497DECE
+:1057E0004F7E217C1DB3B552FCF0D83C9535433F2C
+:1057F000678263F35982EF65F91AF2CD50C6DECCA9
+:10580000E1E375D33349BCE8D8EA068A339BE36900
+:10581000DDEF6B53AA517F57231E75E35E29F077A6
+:105820009D289923A879E0BDBDEE010FC3F8D7D01C
+:105830004FCAC36EF48B75FD1CE317EC5B6EF25719
+:1058400054D79E2D6FBE5C87CF0AC6E3B3FB1FF211
+:1058500068F0BC7AE8DADCB02B391ED1B78578BAAB
+:10586000071F8C237F4C79CE45F863D8081E17623A
+:10587000FB53287E9AF207D58776038ECBF500F787
+:1058800027AF147113731CAF3AB4CC205FD2620AF5
+:105890008BE8E21769D69DE49F4D8B59E9B979BD34
+:1058A000E5E774C73969BD49FC27A3A7C4BFF979E7
+:1058B000590EE7CB63B50B35F41BDA5313DBC11B71
+:1058C000453B5937E723248BBBCF17743D131C97F7
+:1058D0008FFEAA6A7B78685FD6B9C4CF85F21CE6D2
+:1058E000E4707DEEBEE92511C753D7626F52AFA6B3
+:1058F000597B8FC7FA4DF1D8B4D13DE279FF23F13E
+:10590000D8969C7F2C1E7BADE0DB0BE5A1DC6837D5
+:10591000DA3DDD7815743C134C6161908FB756AA5F
+:10592000148702FE20FD78EC0185ECCD68AD83F490
+:10593000727D6D0AF967EB4B557A5F7FAF4AFA3398
+:105940000AF26109C887DF0A3961F6CF5632C510FD
+:105950003F9F3E3AC550BF69DE7DBF5D8DFEE50AC3
+:105960009B86E31DD1B8BF39EC57C97E853E7C517B
+:10597000F44FDF7FB50FF599E487237E95D65BF86A
+:10598000A8EAC361DB853FFAC886D208E6A93025BC
+:105990001EA7D70663FFF514077ED5BB85E29C29B9
+:1059A0009F3F1808D0FE31A89592DEE4F1D314B1E0
+:1059B0004E27F6ABB801F5F89B9B6C0CFD466FAE1D
+:1059C0003A43EBB9637513E54548FFB2F40F9BFD0D
+:1059D000CC66FF720FBFB2C99F9C2C9FE15749F85C
+:1059E00043CAAB64FC0162EB484EEEC5CB31293FA4
+:1059F0005E13704EECB7E5DE66C043DA5C95F020CE
+:105A0000F9F2D5CFEE7A04E5700AF0C71A86F8FCF1
+:105A1000F7E7711FC2162A09FDC81952AE63FE448A
+:105A2000499C2E37051776D771F9CF6E586EC8FB93
+:105A300030EB95E472AD77B9B53987DB5D66BD6350
+:105A40005E0F5FB4DEA9AE7DA004BFAFAE9D17C1EF
+:105A500072633F6703CA5FB37C30EB896A939C8DA6
+:105A6000EB07954546E9E7AD51BBB89EB0D3FB7354
+:105A7000293CDF21E4E4E5EDA9E9DBB03C97C2F382
+:105A80001DC26814A29DFA465AA485F6E54D63919D
+:105A90004F42CCD7114638BDA9E44768EDCFDBA90A
+:105AA000D7A472BBFC4025C1AB4AC37C6D25AD9B1E
+:105AB0001601CBD6EC60512ECCA7C56F49C1F8C2F8
+:105AC00044B7F510BA5E5A27589883C5F115CF0B25
+:105AD000611E05BEA7770AEE3F4B9DF6C164A70E77
+:105AE000CB457EF936EC0F81EF0F1F5677B701A833
+:105AF000877DA33212D9E9B234C7918F7FE39581B4
+:105B0000B86EDF61C1B25C8A1FD7DF8BF1E1C63DA1
+:105B10002AC5976EBEEDD54BC8EE36C529D574673C
+:105B200009FA535A94541FCA1389C77D6E3BC99909
+:105B300096E369B49F68794B117537C94389F703B8
+:105B4000D0AE6034E62AB9496E4AFC035C13701E7D
+:105B5000920E952C7A787CF13F05D734C47772B8D1
+:105B6000FA7B487E209FA9713854B795E0EB64A971
+:105B70003E9C5F48F887D8EB69B4FF93746E14FCC1
+:105B800028E9BC4CD0B973EFD9EF5C05ED5BFD594A
+:105B90001475500730C243E7EB6EE21389070937EB
+:105BA000F0451DCE53C2BD7FEFA86341FC3E3D953D
+:105BB000E2F8D2EE9679073DE494D8BF2FCD55BADE
+:105BC000ED5EF45FFC3E7BC2D2DCDC04ED85BD0BF8
+:105BD000F86EC2712B3DEC93088BEFF392E537AC76
+:105BE00012FD77F773E1FC8655B989F21BFE717AD5
+:105BF000DE7531F46CB4BA362819717CCB7D332D47
+:105C000069ADE7FA37AF3F490F65EFBEBF621CDFF2
+:105C10002C176E579B9802E3ACBF9CAF4BB68A69BA
+:105C2000941F645A2F17923740FF6D085732B9D32B
+:105C300057FA3FD193FE4FF446FFEF65077E86EF9C
+:105C400071A8C232DA17EEC23ACA13FB201A8FF8D3
+:105C5000B62B93513E9BCC8F91F3917932514C5A94
+:105C6000CDD5E5E194F814D4137DE08FA87E7E5F56
+:105C7000007FFCA6773916A575BA54D07FA9CCCB86
+:105C8000D8DD7B5E461FE8F75A22FADDAEFABA820B
+:105C9000C57DA7DF3B3DE9F74EEFF40B9EC2F72D24
+:105CA00076F609D9EF15B55EE4970A8F7F16E6A15F
+:105CB0003CDB2CE44E31D00FDE3F9FA3925CFB1EF9
+:105CC000BB94E4F6972C169A6F27C8EB6D4A9FE0B9
+:105CD0008CE5D2FE2F6CCD827E6FBF8E517CCFAB18
+:105CE000352B58CFD7404F6B7D8757CDE37A5C0774
+:105CF000AF9A9740AFEBE4953D8FF3E74AE44FA7A7
+:105D0000E6B1F626AFB2F28C76421FF8312BEF8B5C
+:105D1000E5C70179BDCAAB8BE6B36138BF6472A237
+:105D2000AF79A0B04E596156CFF119F3515CAD3245
+:105D3000DDC9F5F62E45E8F1D220D5DD4E12160765
+:105D4000849E3FBD9BBF572724B62B7D7959C4CF76
+:105D50004B772E0F580DF924617AFE5DFF69CF1045
+:105D600015F3B45D044FF634EE8794F0CB3CED743C
+:105D7000014FF6000E77F6719ED72EF1952EF61B89
+:105D8000191556C33E42E2ED7635A0A01F3D33877C
+:105D9000619A04EC134628E8E7CAF41BDB4B7CE766
+:105DA000B24D7F5631E5ABCAF83E17F73323F1BD4C
+:105DB000EE7982FD2BD0A704F3C766E709FF839D28
+:105DC00079511F31B5A6573ED2ED4FEAF2FAE0679E
+:105DD00069C8B3887D8351EFED4C6109FD0C7F11DB
+:105DE000EB01EC15F237AB42CF4DEA28A67C9715B4
+:105DF0006E8DFC0FAAEA734E2DEEF97DA61F96B7A5
+:105E00000E1FD955A94CD3C19D1BC832D4F3ABFB8F
+:105E100019DA17040719DE17365C6A783FA0A9CC97
+:105E2000502F0A5D69685F0C88D5D7076FF8AAA163
+:105E3000FDD0D6AF19EAC3B67CDDD07E78A4CEF013
+:105E4000FEB21D8B0CEF2FDFB9C250BF62CF370DF2
+:105E5000ED5B841FD98C97FFCCE372BBC5CAE550BC
+:105E6000B3AB8CFC9B2D2EA37FF33E81FFCA8CF13C
+:105E700025E8576F79BBB404F17D20FD4AF2B327C2
+:105E8000E30BB35C4B264FCDCF9F14E37DFC9CDD31
+:105E9000827CBD6C3FACDB2BA0EE7A6D3DC2B47151
+:105EA000048FCFDA18CF1792F11AF97D77BCC6EAC2
+:105EB000E3FEDA7417BB3B015FDC97A725F4A74A22
+:105EC0003E4A8637C98F17C2DBD302BFFF2CDE5E86
+:105ED0005778BEAB5E1FEC4A30AF337916115F0EB8
+:105EE0001E15FA66742A59F21E5A8F17AB0FE43C3E
+:105EF000401FBC9997DB334FF7E3EA97E63FA86171
+:105F0000FBF9BCBDC557827449E64F3F23F0A6F3A9
+:105F1000A737707F7AAA016F6FC9F56EF2EBB5A44F
+:105F20007F4AFEF416BBAFA42FFEF4B7F218E1FFD0
+:105F300069A473AE8EBEC21F9F6C1F1562EC109ECB
+:105F400087602EABA6DF3725DB1F4B790EFBE312F4
+:105F50008CD3B6E2FE4B49A80753F2CB69FF4CFA4B
+:105F6000A015F4A083FC04EC9006F5DB275AD8DDDD
+:105F70005A1C6E69CF3B98CF695789AE19F83DFB23
+:105F8000365B99A27E21FBCC7EF917A1E7D985E388
+:105F90007D64A74D03F8D7E8F6D7123FE6F89EC414
+:105FA000CF341F8FDFAD03FD88F1BD7DB95C4FAFEE
+:105FB00083FD37E2D1931DF00E447B1E9E6F43722A
+:105FC000E48EA1F523F16A8EF3F555EE8CCFEF61E7
+:105FD000B78ECFEFC56E95F0AF10FBE7C9EA889D8D
+:105FE000E8C73C1DB313DE54C6F32E1B0FDA5884EA
+:105FF000E8C8F397251D6DB1F5EDA89F6DCC9CAF5A
+:10600000AC6520FCB683FC9C18CBE1EFC3CCD98CEB
+:10601000764F4685517F65FA8DFA2BBB2ACBA4CFEC
+:106020008CFA2BBFDAA8BF0A8246FD55D85066D23B
+:106030006746FD55149A60D26746FD3578C3D74C44
+:10604000FACCA8BF866D31EAAFE111A3FEBA6CC7E6
+:106050000A933E33EAAF2BF6AC31BC2F8DDE6D7860
+:106060003FEAE0F70CF5F2F61F18DA2F38F414E5E2
+:10607000F58C3DB6CDD06E5CC74F0CED00E1ED98D0
+:10608000FF3D9748C2D855A79E34BC9F2BECB5ABBB
+:10609000BB9E36F4C35A791E7718FE22BDDE6341DB
+:1060A0003B1A2956D6F54221D0755944F145A1D95C
+:1060B000C23DBBC6E03C3E7CE39A83D8CF822DC66E
+:1060C000FCEF851163BD910DCA40B9D0087C110168
+:1060D0003E598C79E13AF9B698358973817DE3B3FD
+:1060E0000587AE63944F1AF6B763DEBB8453F29B09
+:1060F0005FF09B9C9F847731D87F512D0EA71FFEA8
+:10610000F2FD66871DF976FE1E85FD40E9094FC345
+:10611000DECDEB0B13C06586C36C87FE47BED13F57
+:106120003E597551BCE0F451D5C7FD8DC675B8E236
+:10613000108F13AC7842217F9D191FD23E4D8617D8
+:1061400035CCF70D8D392C12D1AD3F4DE0C3E13583
+:10615000AEBFD3F80F9CCF0FD508E61BA568A96684
+:106160007E1B13653DF19C56625CA7663CBB7DFDC2
+:1061700012F295067F711EF3C5F943335F99F1BEA4
+:106180006CCF663BCAC38BC5FB6BF989E312A0EDEC
+:1061900046DB13E4D749BCC2BEBD03F548B2FDECF3
+:1061A00047F917BD9FFD28FF8BDDCF9EEB4DCF75C7
+:1061B000A2BF0DEC4BB39FCDAC8795BDFBFFAAA44E
+:1061C000935FBBC381EB2EE873F23C18939E2C299E
+:1061D00031E8C9EE7DEFDB0AED7B7F91E1B77B61B2
+:1061E0003EBFC9F03BBC00E72D197EA757076F0BD8
+:1061F000E085CEFD809EDA95C04E9CE495719700B7
+:10620000F94DD655F2F6E67623BCFC9CD1BEDC31C6
+:106210005EB23FDF2AF592FDE91ED3ABFDF95D11B9
+:1062200027BA07E39043E3F941F78A780D2C3B3F07
+:10623000D26D9D2DE0D5E70F67783369BCF4714FBF
+:10624000B6631E758BC7E251342C793EF75A97B569
+:106250006ABBF82EC7F01D3FCFA422BE01AF5697F0
+:10626000F5533DDF4EF232EA37199C93BC7C3F690F
+:1062700063C17BD11E92F161DBDB954E94772DCC0F
+:10628000EFE172D2E7D1E77FD8188F074F10F161A5
+:10629000F95CF5FC637958ED19C189DE047958770A
+:1062A00064F827E1F39035EC40BB33E44CBC2FFE9F
+:1062B000AA97AF139B80170C50E22B9A877AF1F1C3
+:1062C0001FB037AFC7716F57C39427D9E21E53125F
+:1062D00074F5DDCF15F4F6B08F82DE5EEC23B04F9F
+:1062E00067E179327F463F2B6D3BACBE12C4F706A7
+:1062F000FCF738F2D32EC0EF7BE4BD8A73B8B08FC1
+:10630000EB358F57F6B33FCBBFCCCBF30D9BB03FF4
+:10631000FF30CF5A55D74FFA05FA917E8E3EF8AD31
+:10632000BEED4DEC1F3D85FABDAF78DCE8EDE12F09
+:10633000DCE8EDC55F78EEF8B00C8C674B7F97B961
+:106340009D3C1729EB1B328DE3AF2FE3F5FBC5B85E
+:10635000AF887B3A7688BAD3745ED43995D13D1D27
+:10636000F29CA9EC6787D74DED9BB327ECC0F9AE43
+:106370002F56681FBA3E5331EC47EBBD953B900E4C
+:10638000DB44FF3B907F73296F94FC39E63CCC25BE
+:10639000A2FD12EF042AF15C2BCA31BBAA26C4E38A
+:1063A000135E3EFF5999BC5FE977AB7F4011FB2735
+:1063B000E3BD08B0CE5F4E03F97362938DCEBDCEC0
+:1063C000535DEB911F93DD73503B2240F94FFFEC7F
+:1063D000F931C4675A564FBDFABC37F1BD05C9E45F
+:1063E00088CE9F76D87B11794B1DA99C4FBBDC2EA4
+:1063F000F29B9BDBBD2BE8B349F83550AEA37EC9B9
+:10640000525953223DF3AEC0FB3F7EAE99DFE79178
+:10641000ED72D177E673CD1DF68E75F938DFAB15C9
+:106420001F9E5FC8AFF1ECCBCFC1738C1AF9F8D6C1
+:1064300017B3F40A7C5F6AA1F799B33CEB6D98F748
+:10644000AD31CCDC673618C70DE3A4171473B8C29E
+:10645000D7EDCB8776195A171B3482CE7B4FF1E2EA
+:10646000BAADE6F9F33DF02DE49B6B1DEC2F101F48
+:106470005AE23CF4F342BF80BCF93BF26BA5C6760E
+:10648000F373593C0F16D992F2157D3C5F3B0DF327
+:106490009D06737983EF95EC89D682DCF8FA520574
+:1064A000BECDE7B9D30BF8387D3DCF3DA326F17CB7
+:1064B000871770B88E67047270DC19E39BB93FECE4
+:1064C000B3F3E7D531681CF37502DF33F457A4E466
+:1064D00070399CA26924979947A13C57A7E66BC0E5
+:1064E0007A8AEB4A8F8A76B283C725D95C0BC3FBC5
+:1064F00055268A7EFCD54C79B784FB65B99CB5B22C
+:106500007725FFAB02396350CFF23F603F6D4A03FE
+:106510007826BA0E537C32654853259E6B787E0EE2
+:10652000EFE37B49CE0DC8F3EEDDE7FAD98F0E1B02
+:10653000CEF5AF7BE4F0C1AB75E7FAC38F1CF68FE5
+:10654000F8C7F3DBA73CF4C8E1B5AEFFB973FD5261
+:106550009E1D5383C7EE04FC5F0F4C152AC3D2CA9D
+:106560006A88DE5EC2DB2C81E7F0A78067671CCFFC
+:10657000D7EF3D44F83B668379C3F8B6091CD5B61E
+:106580006F66445A482E4668DC1B9CAD9371DFD978
+:1065900069EF1A89E3763EF3CA8030C893E3DF3AA5
+:1065A000E366C07F6F5ABBDCF8FCD4AA97DC780F97
+:1065B000C2F1552AD96B742E5A978FD420F8EA5716
+:1065C000058139C85773567F3E466F8FB3502EE909
+:1065D000DF85119552AFA4FC5BBC234D301DAF2F5E
+:1065E000DD996DA84BBDBCD491F89CFAA3059CEE37
+:1065F0000B1F6FB3176A387E70398E7F4AE4379C61
+:10660000DAEDA67D989C4FDDE3A576DC77BEB9D7A1
+:10661000C1A2E4076EB731F267F9A72A79788F1122
+:10662000FF639EE70BCFA6517FF31E50C9EF540BBB
+:10663000638500AFC1BD0BF93ED804C7BCE3DA14D3
+:106640009457F3362A2CACF1F6ABF0FE8CD05D14E7
+:106650008731C369D62F0B92DC9FB360EF3DF4FD09
+:106660005CE6BF07EDD979ADE6F7D7BC874CBEE055
+:1066700002F19CFB0B84DE19C3C69E1F4CF1A38C58
+:10668000CBB50BEB9D53ABF922FD60B593CA8F568A
+:106690007BA89C53C0F978F19E7D2F14D2326F1FD6
+:1066A000837AE9E583F5695FD7E276F798B65BF719
+:1066B0003F4C4D8DF9993502EF63455EE60271EE70
+:1066C000A1FC58EF799935888F913DE72BEDEC1AB5
+:1066D00093DF57DADD667C9C3E38310DF9E3970590
+:1066E000629F3B16F0A2FEF37849F6DD5295DF9BE0
+:1066F000667E2ED7D11CC1D773B7CF5CDF0FC66FB4
+:1067000079E6BD811DC4A7DC7F512EF055EE5ADF1E
+:106710008EF0973393DF30CC8E321D3F033FA9A814
+:1067200077CC7C2BF9891DE5DF3B855FA39B5FF769
+:10673000DE4BF8957C85271D2C68C3B1A8D7527114
+:10674000E17BAEE6B51AEB1FDB3A06A23C5960F2DC
+:10675000377CAC24DEBF1D2A1844F898ABF9A7603B
+:10676000FEC53C1658CFFDF3FC7E9C53D6D617EEE3
+:10677000C475BE9DAFB3A5BF7CE21728BF16FDEC64
+:106780008174945FEF5B5BF370BC258FAD4B4779F1
+:106790007FCA1A4EC7EFDF8FA809CF115FD24FEE25
+:1067A0009FFD2ECC535B46AC06FFCD0D4F47F9F94C
+:1067B00097C76C1EF4C336EE70441D808F65BB39DD
+:1067C0001EA1FE16AFDF45F86ADC635C978BFEFD09
+:1067D000813C8DFC01E14281BF4214E1CBB6DB2854
+:1067E000AF75D951D587C334B22E82CFFC3DCE23AD
+:1067F00006746BDCA9D6DA337ABE074BC88EEBADD4
+:106800007137A767E36E4EAF46931DDA20E4B69961
+:10681000FFF3FA097920F81EF0437E35996FCB22F9
+:106820005C7EB7FCF8C1916FC1FC3EDAFE9B7465DB
+:10683000449CFF196685023D4EEFAC9F63EFE5BEB9
+:106840009E8FC53AE9D60B420F697B6062F950DD35
+:10685000CBCB25B668FA558097256D365F181E2F6D
+:106860007942F5BBD08E7AD541F74F2C7EE2F9976D
+:10687000AF84F92DDE65CB99CAC170A1FC96F46A8C
+:10688000443E2F8BD367D153CFDB314F139FAFCA19
+:106890008AD369F1AE7D76CCFB34E373E2CE7D76AC
+:1068A000BEDE4CF4DAF9D614D4DB2D3F3E67477ECA
+:1068B00078FF5985E517F7FCBEA1EDF9749433888C
+:1068C00027D42F926EDD74EC41BFE8F4A747533B09
+:1068D0000FC6792E44C7BFE019845CE2F79F3E0DD6
+:1068E000F36878CDE1433C34FCF4D67484E73D6B27
+:1068F00013E7FB47D6E5A1DE6EB085F33C54F2E723
+:106900000D5BBF41FCB8E0C56FF0FB9C98BF00D7A2
+:1069100033C05B8070CEFBE1F504E77C16247E6C0F
+:106920007884DF6F78D6CAAA12ED07DAC4BA796F15
+:106930009B83360FEFD919BF2FE4F7AAB80F6B3935
+:10694000D92BDF10308384A6FA5927A7D7CA7EF245
+:106950009C3D976F8DA255E3F6BB48BE7D30C09F2E
+:106960008FEB1FF060F4CFBE38395FC845BAD785CA
+:10697000BE03FE9B88CFB17DBBCD9F32D2F09DC8B8
+:10698000BFE5E3AF14E3C3BC53D1CFF75E9E719F65
+:106990002BCBF66EB9C0DA999ECF92C981ED1B89D7
+:1069A000BF3E39CAE5CCB2C8CC2A7ADF6E8BE6E3AB
+:1069B000FBC8BE590AC909B04312ADF3ED36B1CEDA
+:1069C0008DEF619E56458FDF67F9F93DC92FF3EFD3
+:1069D00087F6BA751DE71F7BFC79717CBDCAFC8DFB
+:1069E00005267B4E966639F1B0494EC8EFD90F7334
+:1069F000139E8F88CB8730E16F892DF26F3FC07572
+:106A0000FDAA83CE452E79C246F7FB7CF8F8FE97A7
+:106A1000BF0EFCFFE14EB99E8DF2D7BC9E1B9EBC03
+:106A20009E255ACF1FE60458C2F50CCF13AEE71CC3
+:106A30007EDEE0FF96FC5D9044FEBED0AFA7DD7128
+:106A400015543FF8C9E222DA9F99F02BF16A96A714
+:106A500037A3B190DB539EC29FA34C874F8947C990
+:106A6000A78BFE63298DD3CDCF925F253F77F3AB04
+:106A7000196E233ECDEF37E2DEA93C4E7FDB1AD8FC
+:106A80009763BCF61995F2F33AB5AEF42C18779DDE
+:106A9000C8EFE9F4887A26AF77E5DAD7A33C91CF3F
+:106AA000BB5278BE4367A02B3D53B71F786BAF9A9C
+:106AB0008EE7013A2289F332286303FD2049F2363A
+:106AC000E4B9DFCE54EEEFEB4CE57EBEC9AA6B60B5
+:106AD00008F777AD3CBE34B7F9C674DCDF77EE1D3E
+:106AE0003CA31AF70387549E7314F65B0B00BFF5A3
+:106AF0001C74768A85BF3F1EEDF7BD8BA7623F737E
+:106B00003719F132DFB5DD8EFD9C65ABA89C7FBFE8
+:106B10002DCE27F0DF22CCD7423EFFA1E9F9DE6B74
+:106B200089AF1699F82A887C95E03C4966A158AF50
+:106B3000A5AC94EFB7457C4CC8BDC9EA8819D59877
+:106B40004F79909FF738BD5765EB11DEC745BC2CD8
+:106B50009C4BFCBA0CF85BEF37FD08F96E58723DA0
+:106B6000FFD1CF8F8FB9139A2CF9C51F473E0CE583
+:106B700047BF78F592FFC2FA2F5F19F847D6B3FDE9
+:106B8000C467FF7A0BE5753EEBA07B4D3B9FFDD5BF
+:106B9000C03BB1FEB483EE17ED5CC3F7D9E167DD0E
+:106BA000A4FF3B07707BB1E59973233B487FF17BE2
+:106BB00083C717F27B2A4EEFFDDB1B0AE6F3ED05D8
+:106BC000A8503E8AFD5BE3D329B44FEF7CE69C617D
+:106BD0007FFACFC2B34C9CBBEA74B36A3C27DD9901
+:106BE000C9CFA936FED7B81FE1B9CBA5BBF7D9EB02
+:106BF000E1FDC4FFF3F94894439D4F72BB03ECE100
+:106C0000ADCCC7D8570A37DF6B03FA7D8C3622AC80
+:106C1000998EC217A7E179929E78E178E8043C202A
+:106C20005C809706949FC9F0714B213F07F3AF87B3
+:106C30008F3FDF82E32FD93B96EE198EE345F1F3C8
+:106C4000E76ECAF700F8F9F367CF8D443BEA42F0EC
+:106C5000AEFA5F06EF0FFEC5F97D5021D74766BE3D
+:106C6000EFC9D7BFBC8DEA3F75FB68BE7D5CEF4FB7
+:106C7000FF2FA3F7B1FF6FE97D48D0DBEDC1B84C22
+:106C8000E7339F0F641701F7B97F593AF70E77B7CB
+:106C9000DD63F13947C3FC5E6391EB2B95E4F9A307
+:106CA00043FA2B721F44FB0C790FF7F49CF96447ED
+:106CB0004CF7737F4C0B2B3B88E7ECC27E95E217B9
+:106CC00094BC0378689F551AA13C316B78E8F73182
+:106CD0006FEC86A53E7E5F9971FF353DAFAA0AED48
+:106CE000B923CD302F6877C46DF1B4000833FC2A86
+:106CF000D97F5092DDF78709D7521ECA8C0AE33E2E
+:106D0000E4EBA6FDC48DD5C6F737B06DB998EF7723
+:106D100043838DF293AE37B5B7F4F7105E6E644DD2
+:106D2000EBB83FE7E2F034AB3FDF8FF5C443EF78D9
+:106D3000EB8127B1DFA4DC21AD27DE1C41BEFF744F
+:106D4000C00B616F89BCBC157DC22713FB5287182D
+:106D50005AE2D7E1E7F78EEAFA25BC48BC5F2CBEC1
+:106D6000259DCC7897F8957833D361189EF7CC8D14
+:106D7000E33F5E1AEFD566C26E9CDE6D37BA088FB0
+:106D8000BFDBCECF4BFCAEA27E5329D61FE7F7C1A7
+:106D90009F1D3F8A3901DE2336B687E2427EBFE679
+:106DA0001913CF9F512A7E45F109CC5FD4EF57319B
+:106DB0007F510F17E62FEAEB98BFA86F8FF98BFA78
+:106DC000F798BFA87F8FF98BFA3AE62FEADB63FECC
+:106DD000A2BE8EF98BFAF698BFA8AF63FEA2BE3DA5
+:106DE000E62FEADF63FEA2FE3DE62FEAEB98BFA89E
+:106DF0006F8FF98BFAF798BFA87F8FF98BFA3AE675
+:106E00002FEADB63DEA2FE3DE62DEADF639EA2BE33
+:106E10008EF989FAF65F8E3D67A857B2DF18DA4F10
+:106E200074BE64A84FF6FCD1D0FE2BDE1386F7D7D4
+:106E3000681F1ADE4BFA5F5B72C6F01C631FE131FC
+:106E4000B88FE17FA6F9FE66E8C7CA021427B5B37A
+:106E5000262A9DE8EF853295EDA4D205CB1CCBF711
+:106E600087057FDA1FF9756B783D32D79171E70698
+:106E7000A2FCFFDDF8EBB85F42C41766E03F356067
+:106E8000E2B4CFFAE33E57C64FD3632A8B8E023E5D
+:106E90008C29547A62692C9A0D7C184BA1322B965E
+:106EA0004DCFB3639954E6C40AE9796EAC80CABC8D
+:106EB000D8602AF363C5547A63975159101B4E6505
+:106EC000BFD828FAAE30564A65FFD855F47C406CDE
+:106ED0001C95036313E97951AC924A2D762D95C523
+:106EE000B16BA81C14BB8EDA0D8ECDA472486C3623
+:106EF0003D1F1ABB89CA4B62F5540E8BD5525912ED
+:106F00005B4CE5F0D8422A2F8DDD4ADF5D165B4EE3
+:106F1000E588D89DF4FCF2D81D548E8CB550794587
+:106F2000AC994A5FEC1E6A571ADB486559EC3E7A09
+:106F30003E2AB699CAD1B187E97979EC212AC7C42A
+:106F40007E44E5D8581B9515B1FFA0725CECC75480
+:106F50005E197B8ABEBB2AB68BCAF1B1FFA2E75786
+:106F6000C7FE93CA2FC5F6D3F32FC7F651E98FFD9D
+:106F7000869E57C60E513921F6123D9F187B91CA45
+:106F800049B13FD2F3C9B157A99C123B41E55762C1
+:106F90006F515915FB90CA6B62EF53F9D5D819FAA6
+:106FA000EEDAD89FA99C1AFB1B3D9F16FB2B95DDA3
+:106FB000FBFFF1497F57C0721EF7CFAEAC3EDD57E5
+:106FC000B6392D9DE4E2F4555C2E3E98F6F101921F
+:106FD00093E31C9A8384DF1643BC8B7E4402F67DC8
+:106FE000FBC6BDD71FED9DF595275EBF15F5D97280
+:106FF0000713FACC24773F73097F27C37CC49B0512
+:107000005FFFAE627F2EDA51EBCB3A96A0DFE4DE73
+:10701000E28E1A2C0B07703D9925CA8201C2CF5A05
+:10702000C2F56FCDF2A1FCF70572FA065FB5D0DBB1
+:10703000B2BD5224EAAEAE81745EAF8FFDF4B5DD11
+:1070400085F2B03EEF1FBC62406E6FE707FBDC4F7E
+:10705000C517D44FE580047961E67EDE14746F1B9A
+:1070600010988CED99D53F12DF4F5853A0E2EFAA4C
+:10707000D46E523CC82FF56B4BA7205DCB989FFC7C
+:10708000923727C9275B2CE85AD76463E89FACD3B3
+:1070900018F987EB76F33C64F4A74E037E6910FC85
+:1070A000B274E39FC9EFD4D0B480E73D45B87F4ABE
+:1070B000FE8ECDE2D6B617D0AD77961DA6FCF8C5EC
+:1070C0003B8CFEAB46E19F5ABAD3F4BCE92B09FDD9
+:1070D0009E66BFD4DC01C2DFE9E3794F4CED4F700F
+:1070E0009F05B8319F24789BDB897A03F0417118A2
+:1070F0008907E9F794F8603DCF5D50FEEAE98343E4
+:10710000294FEEB4A6E563BB603AFF3D2BC51A1CC0
+:107110008BCF018F94CFD2D59C46F9506F811ED072
+:1071200030F1CA131C8BF7C775BC368089FB2B8DD9
+:10713000F108E726CA13AF8539605E4AED63D9745A
+:107140006E13FA1BB907FD9A8FD9281F29CC5678E0
+:107150005945CF7845609D8DF8A26E4F26CF4F0BD5
+:10716000FB8FE2B9024997B7D60E9E82794D751B07
+:107170008A4BC95DB7C746F6A18CCB4A7AF5CCDFFE
+:10718000E6F9028D2CB21E5397805E2713D2AB75A1
+:107190001FD115E8763209DD4EF646B7874D7443A8
+:1071A0003FF58DF8725536ADE79A35D1A14D3AFECF
+:1071B00034FBFFD9DC2BE9DE1399FF5CD54FFECE03
+:1071C000982F0FE97B665339D1CD4CAFAABFD713A7
+:1071D0005DD86B6EBA77F8E6C16CCED7E0F91CE1EA
+:1071E000F7BCB9E51AB2BF770B39F7BBD598FBC925
+:1071F000D88BAB9DCC0FC6F74BAB3D54FFC36A2F6A
+:10720000D55F59AD51F9EAEA122A4FDA795E915CFD
+:107210005FC00894DFF7B458574F0F90FBB2955EEC
+:10722000F47357FDFDA5720B89BE37A64F1E40763D
+:10723000BB215FA47A96311FA4C326F2CD362A3E25
+:10724000BC4FA62E7095A13D2B1915AFA3FE11F9C9
+:107250002B751B32E91EBB9BA6661BDADFB0A1D0E3
+:1072600050FFFD008DE09E5935D8F0FCEB359719A5
+:10727000EAB5E2F723985641EB46C6BF407373BAAE
+:107280007878DB4F9AC6E6DF0EE37F72D846EFCD03
+:10729000F438690FD37E3EBCCDE1C3F8DE293CFF54
+:1072A00006F5537F5029BFE8948D853D20E24F2994
+:1072B0006C2D96CCCAD7D5D9637C5D55FD5D65B87C
+:1072C0008F673F71507CB07E8BC2C27837431760A6
+:1072D0001EC65DF96307C13D778BCA8274BE4ADB67
+:1072E0008971F2958F0DF3617CF4E6C1D10178DEEE
+:1072F000B0EBE7293E3CF755DFC1BF3F05FBF34C40
+:10730000CC8F52CA281EF1A769ADF32D986FA71E26
+:10731000CEC5F5FAA727F9EF9A2D5CFE87311EC07E
+:10732000F3A21776BE5C01E39C6C5569DC0F7738DD
+:10733000DA545AF7FE7CBCDF360E7784FC14D7F69D
+:107340000BFC0DE5F507F3232349FEACE2FEF19EAD
+:10735000F8017891DEC8AF3A7916D76F3CFE064245
+:10736000A800E544BDCD4771D9939B6C142F047DD3
+:1073700040F906275BB32D5C0E3D497C5767D5EC81
+:10738000FA71EB36A97EFEFB189A1DE7CB36AB41AE
+:107390003616EB3C3F22BC4109F2F88F91BEB72E66
+:1073A0001F4BE7A2CD795CB2FC18D6545017575A40
+:1073B000F40C8FFFB2D11D567D9EBBF4CFB060851B
+:1073C000E13EA325831EFCCE78284FFBF9D58B67C1
+:1073D000B7BB494E7E64796ECCED507E382DFCAE45
+:1073E00015E8F2A21A1C3610F3862C9BB62A145705
+:1073F00039F11D8CFB7FF084CD47CB50E48D2DFA05
+:10740000C9428A4F25B7179897C7AFA3798A176FD4
+:107410002766942F329BED14FE8508CF33C04900B8
+:107420007E3C4B785CEC44B9FB6E3C3F5C6F3A6F42
+:107430007C429CB3B872A062D0D7770CE472A0DE15
+:10744000C2D7277B96DF43297F2F4ECA71296FA5AC
+:10745000BCFEEA409EC722E52C633B49BECC17F731
+:10746000252FD9E1E0E78B34E6413C2EE4646277D6
+:107470000DE4EB7A91FD89EF235B2F60EDA4F73EDD
+:10748000B045E6B717E3F76D6BB3E87B9B2F82EB54
+:1074900038227F8FCE4A726401E3F35CDAAA44A2F9
+:1074A0003A7F87FC7D12867A4227777AE805933EF9
+:1074B0009827F4DF3C66CA376A35EAA9409A9BE010
+:1074C0005AD42AF2B0BBE7A5B2F318EF0A465E9889
+:1074D0004EF3567C9104F358C0BAA2782FF2D2C76B
+:1074E000F93926F3BCCC70F4759EF37D3327E1FDAA
+:1074F000CADDE39AE62DF1CDF060958E0E12EFF322
+:10750000C31C9FF3F72A44AF7784BD25CF079AE9C0
+:10751000BF8005A6A39C5B703FEC338BE3FC20F996
+:1075200060E1AE089D07FC90B5A6BB603D2CD9B2CA
+:10753000EB8671F0FD821FBE68477EAFC98A0EB52B
+:1075400064C2FE333CE9BB555727D0FB263DFF45BF
+:10755000E18909BF157D077899B75DA53C0A5D3BB8
+:10756000914710267C3584F9EF09361C557D2DF0A6
+:10757000B4017FE6A8ECE2E72BF1F63F3D6FB35D87
+:10758000F38B81BDDB356679D3C3AE31E9533CCF94
+:1075900081FAB32B97E7A77F62F56764919C36C9A0
+:1075A000E1DC32BA8F55CAE1F9420FCA71E6A1FE99
+:1075B00083FABB5B9E4A477FC63BF73F9547F91A64
+:1075C000A86F46C4F5CD6DF57CBCDB7E9942F952BF
+:1075D0007F9AD63E12EDC19A477E95AEBFEFF54F2A
+:1075E00005C1A30371BE423F2E55DB06E2EF1A4AE6
+:1075F000397BC17D5B3238DD1780D36D84B30EE1FA
+:10760000D49D53A91770BEBD81C377621387776E6F
+:107610000F38C31457B9ED470E5F98EC8E28E9F583
+:1076200053BB5486FBAC6EBBC364079C65AD5B115A
+:107630001F4B57BCF28615F862E125801FE0839A44
+:10764000CD0ED2FB0B7FCEE3A91F2895F914D03FB6
+:10765000104DBF039E2F027B01ED8DF83CBAED80EB
+:10766000CF108FDD76401FF1B74CF8B596EDFD15C4
+:10767000FD8E96E2E7F998CBE4BD367B4CF7DA68ED
+:107680002803F8397F27D2A9BFF93E2EEE9FFDCB04
+:10769000D03FDFB282F8BFEB12FD39B6C6D4A80DD9
+:1076A000F390BB762964272D5D59995EC9F07C1B48
+:1076B000F7AB151471FDA6F8FD945FE300BAA6C2FE
+:1076C00078FD8B34FE5CF3F07CF31F32BA4747CE73
+:1076D000D7FC1CFDED4ED4872E0BE94333FCD716A7
+:1076E00071BDB954B5907DBDC4CEEDEC4E717FC572
+:1076F00070318FE145FC9CC315C2AFD0897625C699
+:10770000BBAF76D0EF18313689FCEE56C6F9CF2ADA
+:10771000F1E6B17EDCBDBEC97EEEEA8F78BA85B5F2
+:10772000D3EF224EAF98A9E1798637F29C744F14BB
+:10773000FC09603FB3453F476CFCFCC21B3806C0E8
+:10774000355BF8A7DFC0EB5161FC370AEC64D786E4
+:107750009F7190DD70572AF71FB29C0C2BAE87AF3C
+:107760000B3975F378871FE5FAECF17705B084FEE5
+:10777000C20CF055E3EC5A570AE3345BB8BE6FCE47
+:1077800062DC2FB0B6A31CF1770598C998BF0FD063
+:10779000EF3E9FDD1B1F19CF4F2C413FC3958C330C
+:1077A0005805E1D7505F62E7EF6B1FDD31E3FEF173
+:1077B000B04FC0AC29D4338823E48BDA0CDAFFCE87
+:1077C000C0F30559585A89DFBE6665610B2F37B87B
+:1077D000E85E25AFE17761AFAF60D10C802F7AC84A
+:1077E00078BEE3C6A8253A0CE345D6E83EC49FC55B
+:1077F000A9D93C304EA04A2943BC2F59D3B7F9AE82
+:107800007CF4A919F7F7873ADEE785F3BC43A17C3E
+:10781000A1D9B0E8914F6FB1B2036A19A71FF26105
+:10782000639616A676CB399FCB7325922EA5D0BD35
+:107830001EBFB3C5FCA09F0DE9F8BD3DB15F252C6F
+:10784000F852DA6B8BC5BA5D2CF9EE71E37ADD265E
+:10785000D70DDA8780B7D9A24CC6F78F8A75F16841
+:1078600011DF67DE5324F7997D1B6FA9834509EE6D
+:10787000671C444739EE0C513E523488FA93F3901A
+:10788000FC3B9F35513ECF7CE1A7B18024A1FCE0B9
+:10789000D61F71BF9029EF080C25CA6F5BB4DDFCC1
+:1078A0005CE7E7510D7289FCA68ABD6B2ECE4FF9BD
+:1078B000528A0FF97DB67D27F907CCED6CF8FBA94C
+:1078C0001877DB00769522E26550776C52E8772FC7
+:1078D00066F7EFBA1CF53948EB29742E54D8DBF360
+:1078E000057D1DE27EABF9685F615C0DED2BC4D7B1
+:1078F000166E575A853D5CB7C9686FCC5EABB33B1B
+:107900007961B81FC061CA53B709BBE34D7BD7E5A6
+:1079100028F7CDF705BC69E17084F318BF573387AA
+:10792000BFB70AFB52F2D5CF8A6C86789B3C775A58
+:1079300083F28ADFDB60CAD372D1FD31350ABFBF63
+:1079400053FA215F17E569B043E9BE9CE369140768
+:1079500037FB273B2BDD618BCE4F7973C66DD3117F
+:107960003F35E9762B96AF77DF2BD641E31FF70C37
+:1079700022FB677DE5A82D989FF4DEA36766380794
+:107980005034459C9F8AFD0EF3E9677D06F050FD5B
+:10799000AF33FCB08FEA7CBEEB162788EECF8B3E70
+:1079A0009D61053DDFF940D756AC67686A80EAF70C
+:1079B000760DC43B9733220E5E6F96FD3902D85F79
+:1079C000E743BCFED1A38E4018ED5F716EA9E64A75
+:1079D00085E4AF0BD75779DCCF5463798E9713F8D2
+:1079E000EFA25CA89D570BB88ACAF13ED493F4FB72
+:1079F0000B8307F95D45807FCFC0E0392C17CD544C
+:107A0000C2763CEF7F347289D06B097F27C425D6BC
+:107A10006B617180BE977E74E88769E53DFBF96F05
+:107A20008E8B3EA000800000000000001F8B08002D
+:107A300000000000000BE57D0978545596F07DF5B7
+:107A40006A4B52498A244042162A090901031490BC
+:107A50004080A04512202C810A28A2A0168B10106D
+:107A60004840EDA65B7AAAC226E216D4B1691B9DF6
+:107A700012D1C66EB5A3B204D92A6C823A5228DA62
+:107A8000A8A041504163774418E30CB6FF39E7DE04
+:107A900097AAFBA8B0F4F4CC37DFF7878FEFE6BCEA
+:107AA0007BDF5DCE7ECEBDF7651C63AE7A1B633F88
+:107AB000E3CF0DA1D2D6D5C05821632F3ADCB6AEA4
+:107AC000504E5D9813EFC967CC9EE18972003CB7B8
+:107AD00052F199FB30C68EFA73DDB18C8DBB423FFB
+:107AE000BFC8BCA49F847FA49F8F74FDDCAEC0BBC5
+:107AF00083E03F733AF0FD3BB25DBD1D1D19BBEB4A
+:107B00005F9807FB6165430C6C0063775B19FD7C34
+:107B10005FB335D75A00E54B96449609ED5ED9968A
+:107B2000310BFA618BE1A514C6BE69FCC8EC807EFE
+:107B300016B4AACC95C85875AB42E5824D8DE611B6
+:107B4000D0AE1ACAD2B0F9CD13F365ACC93821361C
+:107B5000F4BCBF83CF97B1358CE17C5E396BF440C8
+:107B6000BBBB0CF55F3E95048F072BCEE71D97AE90
+:107B70003355BCF72963E5F5F997D60F722854FF02
+:107B8000588EAB08D7D905FA405835F0F5EADB2F07
+:107B900015FD4D8D6677B8A17EC68058AB03F05DAC
+:107BA00078D4B32C16E6316B5D663F15FAE89F5129
+:107BB0005282FDB19983257C9577612C88EB33B691
+:107BC0007462507EBFA3309EC1BCA62604EF617DC7
+:107BD00019FB8DBF7B9D752863637E0B6DBAD02B1F
+:107BE0002E06EF965B04ECBBDE5D560CF0DF558293
+:107BF0003D8EA23A1FBC7F10E703E56D037B45B3C2
+:107C0000DE80BDCC18833D9EB192F469BF41BEB801
+:107C10006DE0D011F87C982536771AE197117F94A2
+:107C2000A4BB27633DB667B00E8F39D0F166588785
+:107C3000E72DD5E98375787AC778FC11F03649E0ED
+:107C4000E1370E3B95070D30CF7EA17968E30367DE
+:107C5000DE1384FE4E2F4DE9BB1AFA7B367DD81217
+:107C6000C28B18FFD974CF9CF0F161B9BDF1F9D581
+:107C7000CE639698C71241377731F099C0F5CFF0AF
+:107C80007F42598C04DF383691B9F242F0A41B537D
+:107C90002578F2D46CA9FDAD33AF93EA2B2CC182C9
+:107CA0001A5B88BFF5F3D14A2014F16975ECC63828
+:107CB00006533CB1E3C28753404EFEB641752A30AD
+:107CC000D7393B9FFF7008B43A070B4E04BC9D7335
+:107CD0000100EB3DB749F5FB32913F5CC68A4E8C03
+:107CE000556157D07EFEA1D7CDC3E0D7AA9AD963FC
+:107CF000918E73FCA6CF9BC2E679815D34B32C9044
+:107D0000878DF2F36AF6D0776A6F840266772FE880
+:107D1000A75E575F33F22B1687ED8C9F3769EB8494
+:107D2000F1171FCF7C645FD8BA9F76C4267D791D7A
+:107D3000FCD28FF5FB59C5F19A0FC00A596943234C
+:107D4000D169D921D5892CBA2C5D610AAC73E4269E
+:107D50008B3F0A44EBDB6D27CD0EC0D70F5EC723E8
+:107D6000FB4C28FFB58C25E27B27CD4DF07CA8C3CA
+:107D700041785AB0E33B3303BA8FDCB190E47A0424
+:107D8000E8B178E09F6023EBB509FAF765C63A9F42
+:107D900087FEEF5A350A848BB1F8D62954CEAB1B37
+:107DA00045FDCD6F9D48F082D618820F46074730BB
+:107DB00098C7C12D1DD83298C7613590FB7BECC7A1
+:107DC000124B7AA222F5B6A5B8EE83D1BEFCBB61F8
+:107DD000BC8A3F8F2C47BC2ED8A4B890CF2A5476AB
+:107DE0005049C0F946517F15EA7B050BE1F998D25D
+:107DF000589F219EEA19837A7540EC6A06B06A069C
+:107E00007D11813F0F09FD626AE2F31EDE5A49FDD2
+:107E100069F5871D59B47E0D3675DC609C6E0BAD1F
+:107E2000C7D4A45039BAF53A2AAB37551A1D30CE0B
+:107E30005B79CF25219EA0BDCD13512F0F8C6711EB
+:107E4000F497565A843E9E82FA18FA3D90E5FA025B
+:107E5000E572DC9226A315F5A9CD6A7F1EF8605C59
+:107E6000515FC7ACB075A97B6E610EE0234B528B9E
+:107E7000C905FD4F81325C7FDFD18EBDF9A64D7FF4
+:107E8000D752A9D925E65CC218F0F9ED763E6F4DC0
+:107E9000AE8E89F6DAFB4185CB876FB3C5FF3CFC1C
+:107EA000FE5996E7279C6F70189BFC1AE9D3604631
+:107EB00065EC3F6FFE405F2BD23FCED8C412E07D11
+:107EC00043A6367F2ED7579A7F8B98FF61952D4614
+:107ED000BE387CC30D4117CCABF1BEFEFDD13E6870
+:107EE000E325669AA93F666FB988FC5ABD2BC6B1D7
+:107EF0001AD65701B441B865A7C5BF3E939E332536
+:107F0000094BCB7A05EAABE35A72D1FE94EE8E0AA6
+:107F100020DF36EE8E32A21D7933C79398D9119F98
+:107F2000772F5380BF5D3B2C46E48364872B29B3B6
+:107F3000B0FDF95E498F69F2A8E733CF2A2E7F1E84
+:107F40002187D304DF4E177238CDE88CFF25CCFB98
+:107F50008E7754867A7CFA12A5D7A602D469B1CE60
+:107F60009C3039D4E4CD847CD91FF993F3E5BCD699
+:107F70000E42BE3345BF5C0E2AC040237E2AAEEBC4
+:107F8000E047F95ED09A48ED3479D5E4343DDB53CF
+:107F90008AEBAE5806F20DE37896A614A0BC84F8DE
+:107FA000C46C477E023E499E15C607CB1A7F342219
+:107FB0009F988A15E2130B94A5617CE46EF353EC51
+:107FC000233AC13CC62DCF34AC66A1FA72E4978E39
+:107FD00057CFEF85A2FD745B20C700FD996AA29C74
+:107FE0004B615EE7921CA4C7163D0000A06091C9DA
+:107FF0005D8A7EC6A2DF294ED4BFE87FA0FE19703D
+:10800000ACC6EC099BDF2DADBD9903F034B1B51BB7
+:1080100095FD333C93100FD35A27093CF6A69239AD
+:108020008A0C389F7BACDCCE9CAFB9FF761CEFBCD2
+:10803000DFE2C4F1182BE2F416F32D74393BFF1282
+:10804000E7F78E893D0BEDCF44795494CB33E9CCDF
+:10805000FE384C71C65AA033F47BC6C47C76A0E7C8
+:108060004C803D087760AE0EFD50EE609D6176E578
+:1080700082B12E8365037D17FDE55323A8C239B96C
+:10808000C1DE011877EA306EFF9B3798C8FECF6BD0
+:108090007C6F8001EABFCE747566A07BC774F1D493
+:1080A000E07AE64EF0BF6202F8AE875F8F1BE4080D
+:1080B000E1B3DE18C831C2FBF580471FCCABFE210F
+:1080C000B5DCCFFD9E98CA5E57E6EBB9ADD9841FEB
+:1080D000CDDE68FA7BAB37191611D2E357B2431ADB
+:1080E0007FCF1772301FE58085DB9B4AF730E4C3F2
+:1080F0003CC599C3C2ED0D97074D4F03BF93DC54A8
+:1081000064A73B97B190DED6DBA3BD6AFDE3836134
+:10811000BDCBB33CEB510F94FCE9BF5EFF18AAE660
+:10812000BDF66219D269D8750A5395ABD1933F9ABF
+:10813000484F2EA964A427A10CD793A676FCF43F40
+:10814000645E9B9EFF57C1F7E0DF92DF887A3CBCFC
+:10815000BFCFB24AB6219D77652A5CEFFE93E6ADAC
+:10816000D7EFBBDAE4F5EAF4FB4BA2FD95F4FB1183
+:10817000D4EF8597EA7306FDA13EFFDBCE1E7ED4C9
+:10818000F79F32D0FF68DF76C4389E17FA9EEC4125
+:1081900074BCFF72FAFEB19C1947103F11F4FD7BCD
+:1081A000FF0C7DAFF1975E1EF472A0E7FB310F82EA
+:1081B000FF8574DAAA30D4AF217F8B111F1FCCE268
+:1081C0007CACC94D98FF45761EE4C19F9379A95CAC
+:1081D0007E5FF3970207C69B05B17D9912E2774D4A
+:1081E0005E347ED7DB9139591E35AB302427F35EE0
+:1081F000D3DB81F6F8699B09E357D3BCEFB81D8048
+:1082000032DC0EB4E7EF58B3AE4D0EFEE32AF92987
+:1082100035EB7F9C9F52B322F3535A56C77F9C9FE6
+:108220002E4347B2331A9F8D799BF307CBE6FE3E70
+:10823000F00BCDFBA039DDBF2C13F51ED787637E75
+:10824000663588CF3B443E41E3D711D91E17CE5344
+:10825000A333FAF7E8B75FAD5F3825A986B9E0F92F
+:108260001D5086EB0D0BD22F827F3FFC1AE9DC3FBD
+:10827000EBEAE83C49D0F99FE8174ECB8AE0173289
+:1082800017B7FF21BA582622DF7C1F303294AFF691
+:10829000E86A5ACBF1AEC12B0246CDBE26A27D05BF
+:1082A0007E99FEDFE1978AD2FAF35670FD7CEB8B64
+:1082B0002B8D83001F454CE43F86AE717543FD0254
+:1082C000BF0FA61E293F725815B0EFFA2365308FF5
+:1082D000318FB7D5FBB07E78717C5B3E054309AD2D
+:1082E000BD77FD90230FD1BCEB38BE3D4D4677AF37
+:1082F00030B800E0D830B84807AFE3EDD18ED8A948
+:108300001F3F974FE85FE987B0D69F9003D632A210
+:1083100003FA8B9B143BE6436E2DFE9B19E95351E8
+:10832000DA742015D6FBF8FAE195B61EF01CF5209C
+:10833000CCF7B9F5156B7C46F17E27CA8FD18FA596
+:108340005E71A940A779458A3F2BF3523C3E9725A1
+:10835000DB33FC31CAEF3373C1B5BD8FF24BEF672E
+:10836000D1FB01CB358C7F733173F923E8C957B545
+:10837000761701D6FA07DC4DACE771B8BEFD3621A1
+:108380006F4183613E037C35AE9FB606F365C3192A
+:10839000E78FBDEB3D95980F2342EBD67BB9F9FEF5
+:1083A000214B8EEFF0C721BF1FB81CBE5EBEE47D1F
+:1083B000C11F5532BFC41BDDFBBE8779C427297698
+:1083C000F46B17B8A31E42FFBDA254E3EFBB2A5DB6
+:1083D000C5B0BE2826E5FF42FC3DAF12F97B01D3B4
+:1083E000DA2F588376C96D686BCFF97D87D2F67E18
+:1083F0001EF00FA5E2E0FD13EBE7AFF1D9881E54A4
+:108400004F70B7CBF07BBD0E2ED6C987E06F924F71
+:10841000D4DB809F9C087AE33F059DBF55D864D488
+:108420007BC112EEEF05B378D9259BFB77866CDE16
+:108430002E3A5BD0393A0C0F69213AC34F00E388DA
+:10844000B075139E6E49D2D6FD70E55858573081ED
+:10845000F552804F92B21F58B33C8C4F3A653F5C47
+:10846000897808F5F7E011D4FBB7083C75C97EE8B8
+:10847000888FEB3305E56E3E3104F0C126C5A7C2F7
+:108480003AE7231F4458E7E94BE5C6A77BDF65BA07
+:10849000CCFB5F5FCA872EDDFBCC94742DEF0B3ACB
+:1084A0008DD5D1B15C47C7321D3C5583FD923ED37B
+:1084B000F4DCF486352B3A2561BE51413381FADA7A
+:1084C000ACF465ACCF734F56DA0621BF3A4CA9A085
+:1084D000F3FB3FB7F6881578B912F519F1EFEFD62F
+:1084E000B8801F27A2BC13FC54A5AB0FF24FCD8A56
+:1084F00064683FE8B9DFAFB142D35B97AF31A14FBA
+:1085000033F4B9A7D718817EB714FCF900F667AC2D
+:10851000FDB72363332FC3AF75BA75ACD3C13E5DCE
+:10852000FB27AEA0DF97EBDE5FA2AB7F4807AFD59E
+:10853000C1ABE4F7A7CD54484EA601FD1071579288
+:108540009B89D96D79A4367BA6D8C84F92F87ECC8A
+:10855000320EDFF6DCCB95ABF2C3E0EC3F5786F38F
+:10856000B189F19F2949CC87F6C3D48E3E1B93DD98
+:108570000E1FE5E9ED1DAFFF0C7F4DA17D16C92E45
+:10858000EF5565B851D5E6BDF3C83D367CA8C13B73
+:108590002AD11F6F77DF83BD5189FB1E631E15B083
+:1085A0006F5B25EA3D6D9D5AFB113FFDACE278778C
+:1085B000676FABDC80FB2A25811CCCD74F4DE025B3
+:1085C000D81915ED58B5C8778CD8A9BAD1CE4C8D2D
+:1085D0000EE42CCA0F5B27ABCFC57536DEA7127D24
+:1085E0007CCB783C329D39CD98AF688C8F5FFC0294
+:1085F000B4DF7B9FBA18EDDAA78B133BE1FCF7657C
+:1086000073BF6D6F7CD74E7702DC18738719F3B593
+:108610008DF70FA7728FEA5AD9027CBCE6B9836442
+:10862000E71B63E2093F0F67EFABAC05B9A8CB7658
+:10863000D0FB9E047BA706F457579B18E6ABC1916D
+:108640007A86F8E6614BDFD5308F69B5D7D1FED198
+:10865000F47FAD1C9102EDA6AF30D1BE02FCF4C692
+:10866000797B560F3763FDCCE5A2F48DA472F7DF5A
+:108670005F7FBB37B46F794075AE87C6BB5AB3E234
+:10868000A6C3BC4E45713DFC7973B7389C678F6EAD
+:108690009E75D9C8AF71B1D10A1A0FBB236E02F40F
+:1086A0009B9BE37A3ABB63A8FDEEBFABB40FB6BDAC
+:1086B000797A27CC3FFD41E8EF5DADD33B4D0FB359
+:1086C000F7B3BE35129E779B1DF7A07FB93B3A5D8D
+:1086D000C1BC0CE03911F3B633857F0DFCB2F8F55F
+:1086E0000876FF896C95F072DAB2989D02266E7C4E
+:1086F000B06331CE537B4FDB7F33A539FA85FBD195
+:108700001BBA96BC8EEB08F1D96747906FC88F06ED
+:1087100078D7739FACF1A12DDC0BFE3FCE23C9357A
+:1087200002EBD99244BE0F9A5C9F1B9E8F08F9A959
+:108730004B853EE0ED4EF862296E3DF152941FE309
+:108740009913BE4F62C3F3EF9A9CCC8E8BF5A13187
+:10875000FE2A36D68878FDD4E8FDF257B86FF8B413
+:1087600089F4E8ACA73B2E69417D00F4C47C907E7F
+:10877000DCE46E261AB7FDFDC1E6CAB2B430396139
+:10878000CD95AEFCF6E5E4D873DF546EB0B52F2777
+:10879000B385DF3EE269931BF97C7661AC11F7E9A2
+:1087A0004A9EDEFF3CF2E3EC8551FD2C30F1D94FBF
+:1087B0005B88BE4DB1B13E3BEE23C6C51A3B40F9C6
+:1087C000ADD0234DB55114A7A89DCCA4F7D4958561
+:1087D0000EC44FA9CA8C56B02B6A9CD3E1E6F07246
+:1087E000CC1BAE882D72207D3B76E3F2D0561F3F26
+:1087F00079B4D23BB46F7676F1E34F0E84F97DCD38
+:10880000FC930666FEF7F7D1AA993B1EF38FFF5340
+:10881000FB68E66EFA7DB4FCF89B91FD16AB346FF5
+:108820007569941FF1A966703B319229B48FC6EC2B
+:10883000B0FE5EA17D34F5D7FD093FA7BDC057DD71
+:10884000012F71566AAFFE5AF55B60DCD2449E6F11
+:10885000559FAC64B8AF0678F5D9011E995443FB17
+:108860006B4B859E99A630773DC9BF3303E3E4592E
+:108870004F47111D673F33E7C3DF1520DD2A92C242
+:10888000E52953F01FF4C7AC09A17EBEAAFD4D0631
+:10889000CEA7F4DF20BEC4B853F53C790BE9CD1860
+:1088A000DA6F63F6A6870722BFD4C6F4C53CF9EC9D
+:1088B000A75332B2F243EFCF5E7A5F2E7F1FE2D62C
+:1088C00038D45B51B49E799B2CC42FD31E505D6469
+:1088D00027D3CD64273F5F1E45F0BCB42292B76911
+:1088E00006BEFF063E6132E9778E7236CFC65CAFB8
+:1088F000DB50DF3F1454397D7C826E66A44F71B724
+:108900004492CB3B10C760BFA622BF75A4FE781E61
+:108910006A9742FB4D8CD538500F4C3528A4EFF4A4
+:108920007259D18DFBAFD3329CB7E37BF31FB138C3
+:108930009766F239A8DA7C206E9A6F08CEC27D481D
+:10894000B6C542F98D6A5847541C3FF7F01ACCBFA0
+:10895000DAC88C66CC4F39B85ED3E653EDA81C89D3
+:10896000FC0AF5C78C503F3F96EBE5F91D78DE8792
+:10897000C55AFDCF878F8773CEE6EF39E250DE060A
+:1089800011BFA0FC1BA0FE6F8CD797C615399AF2B9
+:1089900069FF7E15E64B703E3D7A878D0B704A6FFE
+:1089A000E4C785C6AC58A443E2A4C938DECB2AE9A3
+:1089B0002710AA478AD00F7C59ED8FF1ECB407F647
+:1089C0008E588BF0AB7DED388569AFBC4F76EA2EC3
+:1089D000C1674DE8FFA3DD02F85528EFEDC6F5832A
+:1089E00047E5F99C7BBB29D2BE9F563FFF0113D1BF
+:1089F00063FE0ACE0FF36BFF42FDCE8F0D76427AF7
+:108A0000CCDF6C1A807CFD2F62DED36BD38B8F01A1
+:108A10007F4C37C5DB157834CF576146785E9D4271
+:108A2000B036DEFC073EE864C8E7FD6169117C14DE
+:108A3000EAB76306DAB56F5E4ACC981646F76F96CA
+:108A40006F8DC37DED5351811C3BE663164639D7CC
+:108A5000939C727A7CB33C673DE66B66DA83B1B86F
+:108A60001F3EF39EEC04B4779FDA0366ACFFB43E7E
+:108A7000D380B0CB6E2F46D865EC43F037E29C0A2A
+:108A8000FD009D16289C6FE6BDB4D79C05E33D27ED
+:108A9000F8ECDB97DFCFC5BCC1FC8C602EDA61E05F
+:108AA000ABDC54A4CB1F15F21716BCA4BAA27A876C
+:108AB000F86A01F215C8FF5CC1570B366DFD25CA77
+:108AC000E902E4A77E97F225C497FBE8F96BCF8E05
+:108AD00060FCFD7DC8779ADD0778B909F36B660104
+:108AE000C338086F10FA1AEACB78BD2F9FEC096BD8
+:108AF00032A35F5CAD727F01E42919FD89EA069318
+:108B0000AF294C3F2EC0FAFC507D7B7CB3BF9BD875
+:108B10002FABB5905DDA2FF0D2F4C0E638E48B6F5E
+:108B20005FDE7B6030C659AF2976D4FB97C8A1C001
+:108B30005B35E2298ED649FE5135E2252E84A736D3
+:108B400079137C51CD381E34BC541B059EB47AF188
+:108B5000FE01C187F398C0EBA6EE5CDE857C03C7FF
+:108B6000901DD1D6E74990CF0FFC20F8FEA858E71A
+:108B70003CE01B673EF197CB3C40C4FF50F5EDABAA
+:108B8000CF52FE48A3A736EFF81C87A6A75D1D129B
+:108B900042746E32B0AA48F9EAAF85DC996C5CAFDA
+:108BA0009CAC4DBD7D31E06FEE4BAA939087B157E1
+:108BB000D8B81643532CF9A7BF56EDB8AED23F55DF
+:108BC0008EC6756B7C67DAA8181B709F907520FCA9
+:108BD0006BF32BEDEC1EDD81F35D00E7A3CDF3A479
+:108BE00012207AF95E55ECDCDF6D32631E5193532F
+:108BF000FD7C7F10F355E394C14A1F9C8FD381F213
+:108C0000CDC00ED27C6CC7EEA3F17C27EECBEC1D61
+:108C10001AE7535FAC11DB7DCAB81ED0F8F2A4C8C6
+:108C20004B9C5CB195FC616D9CD81CCE5761E37880
+:108C300016275D3A8ED6DE94C3E7A5C9C5C104CE1A
+:108C4000FFA5CBFF42ED343D8B3F988FD3F0A9E1D8
+:108C50002D4C2E25FC68F2A5C99346D77F54AED87B
+:108C6000928EE4B7DE2FD64D32D2296417903FD1D1
+:108C7000DE59CCFC1C5C98DD24BF6664DA77664F55
+:108C800084E71A9EF4CF4371953D03F13FD2964C91
+:108C9000FBE56C79F2BE6E61FED929CC7BA13E7DED
+:108CA00051F5933E65209561F65CF3DB6A178EB44F
+:108CB0000F43FE7A49A173479AFD869F87DAF8141D
+:108CC000FAAB2A58988BFEC4EA9C2C1ABF3AC97595
+:108CD00016DF9F77263822CE118A5F869E0FA8F175
+:108CE000981FDC9429C50FF39AF7919CCF67C19523
+:108CF00018EF4E7BE0FD8A8148FF174D747E616658
+:108D00005D26D9BFB31B66F4C7D076DA8A1C82E72A
+:108D10003C7F27871FE07EDDB415852F607EFE54E3
+:108D2000946B04F279CB1AC58EF1D790E70B97DCE0
+:108D30000AF54362BB76C0F99ED870AA6230C611AC
+:108D40008B55921BD786C72761BDAB4175E2126771
+:108D500032FB925B91CF8DF12477DAB9C66526CECE
+:108D60006F77E670BD715B0ED71BB709FE2D5DB640
+:108D70002C17CF15B43C0B760AF7D7CD8EFA00C668
+:108D8000813B3B3BD7C338D510B626033F9D51B836
+:108D90003F5E656656E4AF43A6E0BD38FF43F7C6C5
+:108DA000F6ADC509A81707A07CB844DC0571148D81
+:108DB000ABE14B1B7FA61857EB477BEF20FA5568BA
+:108DC00047C47CCF2E7F7112FA0B6737E624B03090
+:108DD000BC9FC57501BEE7807E7C2D423CB8304704
+:108DE000CB4FF8A9AC1279C443A6BA34DCCF05BF87
+:108DF000FE74B87FFED5B35156E44BF0EBE5E726A1
+:108E00006E57C09F979E83FC48705BBCA74E8DF742
+:108E100044D0475AA9F7F797E7D822FAFB9AFC5DA6
+:108E2000A2D7847FDF9677E9766DE7BA9ABD4018BE
+:108E300010886274CEE0FDB2989F5EC7F397B3EAE4
+:108E40002C760BE0F734CA17EE0B6E56B9BF68E507
+:108E5000F2767A675F3FE615661D67CE00C0B38E77
+:108E6000AA4E07B4DFB7E67E3ADF71E73A8575565A
+:108E7000C2E2AE27D64C42713BE7F4AC4C81F6E738
+:108E800036F2F328506DD3C55B07521CEDC75BFF6C
+:108E9000AC384BCB3FE9F1BF2907E2AD18F8C5C9A3
+:108EA0009C32FE79DCBE1BD8A8A8DFA5F86FF67A45
+:108EB00028AEFAABB78ACA41F5CF96A6C23AFEA64B
+:108EC0009C7C6408CA516C3CE54F9ABD35B439F8B6
+:108ED000D786FE17C7019EB6DBE2EDA83FFEEA5D2E
+:108EE0004CCFDBF846F0E9D04D8D6A2AA3F63B86DD
+:108EF00040FB5DB678DCEE88B00FC7E9AC3F7F730E
+:108F0000F7C2819DF1B9B6DEAF7FC5E9DD66C7372F
+:108F1000CE88437FB5F1F7893B06219D63E2EDC81A
+:108F20000AB3C5399C2FD7727D74C61AFF02E65169
+:108F3000CFAC9BD809E3C33B4D2D6627F4EBDC593E
+:108F40001987F9822F8C4D71762CA17D00E761F491
+:108F5000ABA807079733DA1F1C1C303247266DDD9C
+:108F600013FF0C6A36FA316EFE06F70DD18E5F8C58
+:108F7000E6FBF7623FF0CE6D3CCFD6965711F985F0
+:108F80002162BD1D7213B47D207A5E5AC49F7FB5E5
+:108F9000EEF571D8DFD90D263BCEF7AF1B4CD4FFD1
+:108FA0005C88EF0DC08F6736F2F3027377409C9CAC
+:108FB000897A4421FE9D0BFC6B45FE5B687299E348
+:108FC0002FE5CBD28D3CBE9E5BAF50BCADF1E75CD4
+:108FD000977F04E15DF0A915FEFD0CA6A303AB5F2E
+:108FE00089F8688F5FFFD17C803537723E40CF0FA4
+:108FF0001ADE34BE08F12923FED4E89F50DF7758EB
+:109000002ABDE0237CFA4A581EFA0BCBCC2C0FCF9A
+:1090100043F90CD14E94FB1FA2E27A631E6AB1950C
+:1090200097BF8C8E5B8FE50F51197E9CF70F06FB67
+:109030007E8CB3BCB999C4B7BF541D26057E9D98DC
+:10904000D4544666A0D4E032A01D5C66213DA2D770
+:109050004339B9220F98CBA81C96CBCF899B580DCA
+:10906000F9175A09FE403AFA2F95310917F0287975
+:10907000BF173A4FC4FDDECA2109F76683E739F806
+:1090800085F48946E0F3CAFE099BB3002ECE4DE37A
+:10909000709F844213C0B5B51913CBA0FD2DB92E16
+:1090A000676ED8385ABFF0BC3F3E1F99E219908BCB
+:1090B000F6DF6C5B8576E06F4ACB02831A6A7F44E9
+:1090C000619F6E574270938965A0BF3DAC6DFE9164
+:1090D000CB55B9AE1B72233C9FCED80ACC4B4CF774
+:1090E000BD794C217DC6DC56A0E778C17FD3ADB6F3
+:1090F00000E9B955A6E636FEC8423D156F44BA8F61
+:1091000013641F6F0C34E2FB3DD872FB9756721547
+:10911000D7FD9CD8BEFE0741655F6AFDC1FAFE66B9
+:1091200082F5025D1517D01A444C01244F057DA726
+:10913000EC78F347EC77998F3545111DA6DA910F3E
+:1091400015E631FC0CE5FC18E08B3E58023F40BBB5
+:10915000459BBFDD87623147F3B33C45E42FDE63B7
+:10916000E7EB619EC1C4AFF70A7EFDCACB6A3055FA
+:10917000343E188CC3A3B0CDE302B9A81FCA554F23
+:1091800015D2E1AB75CBD21601FF7CFB9AC539161F
+:10919000DA9FF1BF1E8776759EF0F7D945357003CB
+:1091A000D41FCCECB17E75187F2DCCE576BF39335A
+:1091B00090711FEA994C1EAFB28B7B33EE83F6E5BC
+:1091C00059A30A5713165C77E786ED4F8E33463E58
+:1091D000BF31298DFBEB6C03B7C71623F3C52650AF
+:1091E000C9E2004FA3602E45782E156095F6F3FD79
+:1091F000D41EDBC5A15FE39891CCF77B981BF59655
+:10920000465F8D6E97D013A68C7EBDC1CA4CB8DE6A
+:109210001E6C9D1DED9346D7AF843C7E65E572388C
+:109220005CB5919E5AB499E7F516295CDF2EDAA950
+:10923000F0FCE625F676F34AD4C955EB66903ED3AA
+:10924000F49803FE217FCDB5BBE3038E7FC0EEAE65
+:109250002BBD2A7DB65ED3677D595FE4BF2BF94BEA
+:109260009A1E03F2BC98DBF11AE885288375CF16A5
+:10927000731CAE4E7518112F1DAD4ED4E78B9ECECC
+:10928000263BC92EAE65E1EDD8BA44E2DF95992AB6
+:10929000D1B5A2219539E0D19C0685CEC98E6D4805
+:1092A0002438AE3585E08A3F742EC175B7ED83FE54
+:1092B000A13BC1675F78BBC0C3F33456ECDFCDB4CC
+:1092C00079E4D7A3FD39678379009EDDB65594779D
+:1092D00074B3B67848F9594118B806E5CE65F2710D
+:1092E000FA586B49FEC5BA1609B95A7488DBEB45C2
+:1092F000C3F87EA1D1D7231EE96F3AA8323FC03709
+:109300001D520B03D07499D0E79664037384D12D5A
+:10931000CA11CD1C61F4613E5710E3ADC9825FEE06
+:109320008FE27A3F262F416A37D9368BF82798315A
+:10933000E220AE37D6D945EA9779B87FACF1D5248B
+:1093400091371FC75A96A39DBC6932D487F5672A07
+:10935000FE8EEC86A958F6AB012FA72FC74FCD1A6A
+:109360003FF5603D889F74F801F9207B7FEE28BFB0
+:109370007F025EC96F8B019E74D0C4FC50BF42E077
+:1093800005FD568C7FCEB962496E34BE0BA2DD035B
+:109390003D175F24E3AD834BC65B62B98C9F8E6E35
+:1093A000191F9D276749F5299E9E527D6A553F09E1
+:1093B0004EAF192CB5EFBAB84482337DA3A5F6D9C8
+:1093C000AB2648704EDDAD52FBEE6BA74BF53DFC76
+:1093D00073A5FAEB362E92E05EF5BF96DAF7695880
+:1093E0002AD5F70DAC96EAFB1F7C4C820B834F49C4
+:1093F000ED071E5B2FD50F6AFAA3543FE4CC6B1226
+:109400003CB4E50DA9FD0DAD7B2478187B5B6A5F4C
+:109410006A7D5F8287DB3F91DA8F4C3E25D58F7264
+:109420007C23D58FC9FB5E8257083FA7C2F95FD264
+:109430007B4188D8908F73D23C43BB53DEE78C11BD
+:10944000E5EFD86D0A4BC4F8E7E0443BC9FD35C6EB
+:1094500081C3BB8B3844F0F10566BB1DCFB35F49B8
+:109460002F66A33F51887C3E96EE559DABE7F90EE3
+:10947000BD5DD7FCB97830CBC6B0713BB8AC10D06D
+:1094800087E0C472BB047774274BED3B4F7648F5F9
+:10949000299E3CA93EB5CA29C1E9354552FBAE8B90
+:1094A0005D129CE92B97DA67AF724B704EDD64A9B1
+:1094B0007DF7B51EA9BE87BF4AAABF6E638D04F7AC
+:1094C000AA5F2CB5EFD3E093EAFB065649F5FD0FF2
+:1094D000D649706170ADD47EE031BF543FA869A316
+:1094E000543FE44CBD040F6D6990DADFD01A90E070
+:1094F00061EC90D4BED47A448287DB3F92DA8F4C01
+:109500003E29D58F729C95EAE77DE30CD0BED476D8
+:109510007EDF55F3E7C6E47D27B5332581BF8FF99C
+:109520006F16EDC4F3FEEDF9F99A1F58E1FC511ADC
+:10953000F70703F7CF5FEA9E25FC7FEE272EF3B9EE
+:10954000E97C5E021E78053989F729C47F18624DCF
+:10955000A57C6412ED5B90C974E07937F083004814
+:10956000306466621C1213F263D37EEE7FF57EECEC
+:109570001B10E3A05F7DB6BBE7CF289773EB5F1DA1
+:109580008171CE1CE65B89F300BB1B8FFB58EF4655
+:10959000C9F928AD1C65053C868D7728AA2EADDF5C
+:1095A00065E47794B599DAB7F52BF2550AAC6F51AB
+:1095B00058FF8F40FC650439ADF3829C41A0FD98B3
+:1095C000D74EF013DE64829FF43AA85CEBCDA3F291
+:1095D00029AF93EAD7798B087EC6EB22D8EF2DA767
+:1095E00072BDD74DCF37782713FC82D743E5466F3E
+:1095F00015957FF4D650FD4BDEC504BFE2F55159F9
+:10960000EF5D45CF5FF3D611BCC9BB96E02D5E3F41
+:10961000950DDE8D54BEE1ADA7FA1DDE0682777989
+:10962000030407BC0709DEE30D12BCCF7B8CE0030B
+:10963000DE262A0F7ACF50F996B785EADFF1B61207
+:10964000DC2CF613BEEAAE48F7183598B132E207C3
+:10965000CDFF1D87710F324791E9AF52DCA38B3FDD
+:10966000F4F4F85A8C632A01F717FD9F2EB9EB9793
+:1096700085C505DF8BF1EE8F66BE2890875A03CF34
+:109680000BD42630BA1FC6847F3E5BF0254BE27EAA
+:10969000F92C31AFD9420E0A913FF3883FDFB996DA
+:1096A000384B8BB7ED191E350FF933DDE0A3BC83C2
+:1096B0008DDFC3EF9FE131E7811C9DABB9F3008DD6
+:1096C0006777E6E220159640C79B319F7448A53C1A
+:1096D0006C7BE3558B7B12EDD6EF3A9B86F6A8FCAC
+:1096E000EF2AE5EBDF35C54EC67C4B721EC74B72C9
+:1096F0009E412A7764B83BE33CBFCAA979E16E2555
+:1097000074FF7F3C86E620E795CC61A273B8CCB5A8
+:109710001FAFDEDC040E1FC237331F9525E91E077D
+:10972000BE7F0B0418087B065B3222AD473F9F9E2D
+:1097300079DC7FEF996790CA8F32DC3D103FA773C9
+:109740005CD27CE2BA3AC47D9C9667705EFFB1F34E
+:10975000BB2F95EC10BEB5FCC6CA61E29CD6424553
+:10976000DB07E77EA295697E22D54FBD97E77B3464
+:109770007B79BCADE4FAF05C8D89F4E65425DA8996
+:10978000FEF6B99A7BFBE07EE16D10EFE1FEA9A643
+:1097900047A7026C00782AE3E72EA61E8F253ED34A
+:1097A000EB57788FE17EDF54F03F317E54BAF27C84
+:1097B000CABBEEEF4CD82F4B6AA17BABC037A3716D
+:1097C000FD7307A9F4FD86770DFE5C45257E312BE0
+:1097D00030FFD949C02F11FC058D2F16887B39DA4F
+:1097E00073E0B71B913E7FDD36308FF669760D72E0
+:1097F000203E9719F8BD3ADF5B2A3F9781A97C3C50
+:1098000037129FFF2CDD2F40E702E9372896EE172D
+:1098100034AA6CF1AB11F4E9BD828EEF269BCAFD30
+:10982000D4AFBCAFB840D075816857B1E7503ADECD
+:109830001B5C70D04471112B68CA7747385755BDEF
+:10984000F8C15F740BE3F3EA8693FC3C166BCA0F16
+:109850003F87F5B0E06B8DBF5473ACE7595BF8FC04
+:10986000F8F8C0E7F7083EFF12FDFE711647FCCD81
+:10987000F06A13A02600A5E7DFEC749E4F3BD737B4
+:1098800093B9A99C0DE446BE76FBD6D0BDFAB9AC1F
+:109890009E9E2F289A918170356B294B86FE6E5AB9
+:1098A00055BB3F196637B16ECD70CC734FF04FDBAF
+:1098B0008F65E506E54B9F83E464058EDFA4D4AC99
+:1098C000E802E3DDFAD2B01598471EA7723AB0B7A6
+:1098D000391D809F5C6AC2A5EB03B97848C805CDE5
+:1098E0005F938BA94B994B490ADD03699393A2BB04
+:1098F0003E4BC53D16630B9D43A9DE6549C0FCC9BF
+:109900005CC6ED76280FC4EDB526075F9B38DDBF3A
+:109910007E59A17B365F2B8CBEE7D09EDFA0F99FDE
+:10992000207F5CEE3E8DE1FCAF8ABC5E8627B95F8E
+:1099300076C83E7F6DF00F88CB26FBBD11D7632A1A
+:10994000F13CD417CFEBBDA23897C15CBEEEE0CF9F
+:10995000E0E704DAEC00FB392694277CC4C4F376F4
+:109960007A7F575B477BF3B498990FF7B394A203C0
+:109970003FA21F72E97C3DC903002FCB904498970A
+:109980002C713B22CD63B918FFE04F3C1EF7A53385
+:109990003A17A4C7A762E7E3B4975FB544F3F96841
+:1099A000764A9BE7A5F3E2F47A3F2F93E8AACD0F1E
+:1099B00034459E1DC6371AA39D28AF9546CF7B8898
+:1099C0004F2DFFA6C5C50733BF227BC02E2E4BE30C
+:1099D000E78F03EDD9E1E6B6783C2B6427B53C165A
+:1099E0002B8E9C8F745BEDA4BF263027D98B1EEC89
+:1099F000B8862FCA63A9B84348795E0FADC382FA0F
+:109A00001ACA28CCA390BDF4937CC6E0BC685D4123
+:109A1000CC88B03531718487C1C718E9E9C1B8066F
+:109A200058EFCE93CC8FE7A91A2F4C2A8D85FA9D3B
+:109A3000DF1A290EFA6DCC2BA9F81D899D673F4CC2
+:109A4000C57C4FED852D040F681E7196E7CF8E4FB4
+:109A5000C1FEB69F373B2CE4072C243C6879CAED45
+:109A60008C39711FB4E8231BDD332E3C5A1F437819
+:109A70001379B562B1EEE2F33C1FB20B81411007DE
+:109A8000B4985920CC5F36D965B88885C1993824F7
+:109A9000C061798E6B8D1F637B883CC84036303C3B
+:109AA000AFC65A1322DEA7D2EF2316287CDE67F258
+:109AB000DC9D7A50FE6C82CAF1FD7715F17583CD7D
+:109AC0009F82FE6DE39C1752D0DFFD6DCCDF098FC6
+:109AD0004FFD644E41BCD60DFB0FB22375F06E10E6
+:109AE000E35FA33F8A51FE6B3EE5D76E1076F6A981
+:109AF0008B9FB364C0675D1123FBC9841DD6EAEB5D
+:109B00002E9EAB427A5E28B63A502FE48A7C68EDEE
+:109B1000F5FF99DC14868F9DE0570780C0DBC1AF4D
+:109B20000E80EFBF0DFC6A84F1DE29969BC1AFC6A3
+:109B3000D20F7E3596CF805F8DEDD0AFC6F229F083
+:109B4000ABB15C0B7E35964F825F8DED9E00BF1AE8
+:109B5000CBC7C0AFC6E77517A797D27C8E31BA5F67
+:109B6000BF3426CE80FA15E61F8D79A1C3AE7ED113
+:109B7000888FEBCF1B24FA1637474BF0E0D309212F
+:109B8000FA22FD8F7791EA071CCD92EA337D3D25BD
+:109B9000B8EBE27E128CF9A1F0F753AB4A2438C53A
+:109BA000335A6ADF79F20409EEE8BE556A9F583EDF
+:109BB0005DAA7F344E4747FF3C834C47FE7D850BB3
+:109BC000C5363A5FD91E9F3E26E8A2C18FFF4A9D47
+:109BD0001C296F7B570F83140F741173BBBB8783D2
+:109BE0009EEF3B31F0C5DC02A487816F9BBA5A62BD
+:109BF000BA015D721F37303C5748270E607E76F100
+:109C0000DEE325E762902FF75698A3903EBB5D25D3
+:109C1000D1082FAD30A784F3515DA6A71FDD53F007
+:109C2000F0F569EF3F5A32E1B2FBE88F21FF75BFD3
+:109C30004CFDE8B959280F97E09155D17E6D088FFA
+:109C400013E8FB4ECC5325CD5F2F170C37E953702B
+:109C50005CAB8C4F57D6038887A79E30D239ACB601
+:109C6000FEC4FB5A7FC3D58B314DF997CE7FB78B9E
+:109C7000B707FF370AF1026349F34B703A86217E3A
+:109C80007E27E4ED5F85BCFD56D015E35884999D91
+:109C9000BFA7D1ADAEEAB151B92837457C5EEB6FB5
+:109CA0007C4C417593C89CB5F630BC3E21E6F18CE6
+:109CB00058D73AEC17E08E37BA14C45FC662B78241
+:109CC000F2D6754913C14F09F94EAB69A1E7E9F71F
+:109CD00004A8EC5215A4FAE1EA4BB48E363C386580
+:109CE0003CEAE9E417EBD1FA0DBDFFDA21E4B70B4A
+:109CF0002E3EFF389FCD85F622CE6777F2D2214ADD
+:109D0000A713F57E9CCF25E09A7C84B78975C5F9A9
+:109D10007C04FBC5BAEAAA920EBDE0088DC71CD52B
+:109D200086707BD31E3F6D15F8DF2CF0A47F6F9BF0
+:109D3000A9A6BF3D825C69A5664F8B8E1B747A27EE
+:109D40005A92FB43F80BB7037FE981F2E873AB62E9
+:109D5000FF8AF038B12D5E9A4AFCB426E6F6B73198
+:109D6000DEBEF1A8CAB8BD1DB71FF5E5FBA32C6484
+:109D70004F1B478D4C0FE7BB06B18EAD02EF837CC6
+:109D8000AE13F740FB316E0BE5E3073257FABDD057
+:109D9000DFE8B1AA3300FD1D6DB327EE187EDE812A
+:109DA000DB9309620D7BC64E7C10C77FFF28E80558
+:109DB00047689E5AFDE6F289637A211D839C8EEDE9
+:109DC000E1E74D41AFFD625E7B05BD1A057FEF16F1
+:109DD000F664A7B027DBD19E5890CE45623DDC9E4D
+:109DE0006C16F62488F604CA77853D7907ED099448
+:109DF00005A3B2CB486FE22536B22710A0D07982F6
+:109E000005D2BAB47995A7A912BD4624C548F42A4B
+:109E1000B3254AF525C65409765DCC92E0EBCFF721
+:109E2000D4D929D9AE0C3E3D5867A74A2478C0D171
+:109E3000D1D2FB95AE8952FDF8A229527D85738659
+:109E400054CFC47E18DFA283327A9D4A71AED87790
+:109E5000D2FCA9F7CB55DAB719F481EA0C97DB42AB
+:109E6000D6B64F66C07D32705F1C46ADBF2CA99E32
+:109E7000FCA8A326772A9EDFABAD043E84B2F82867
+:109E8000F869947C04BE06BFB7D03D92FC40F097C1
+:109E9000FA131D5AF87E93B66F3548B7FF343A5F10
+:109EA000DE9F2ABCC2FE94AB673B7E59B7C4ABF2BF
+:109EB000CB40BEC8FFFA6DCCED7B916FB67D047EC2
+:109EC0002AFAB91FFD82FC2FCD6FDBFAC52FC8BF60
+:109ED000DDDA262F1E495E0A85DC6E399AD5D0045C
+:109EE000F2B63959710A5493BC1469F2D224F4665B
+:109EF00079353D1F20DEDB6A72C7A0FFB7F9D85263
+:109F0000D16F981E217F3D4C8F601CC912E4FAE48A
+:109F1000D4507D162756787BC67AEAFAEBA78307DA
+:109F2000EBDA97E8E0D1BAF61374F0ADBAF6D3A540
+:109F3000FA0658F7E5FCEDCD423F68ED0A8D6ED587
+:109F40001941DF0E382AEB57E6AE96CE3D349E9887
+:109F5000457A73CBF195028F55127DF668E31C05A7
+:109F60003CE75FFA7E89D117D31BF8A0E498D1595A
+:109F7000EB08D14FA313C37838ACBF52AB2AC95FEB
+:109F8000C3314EDFF6D6B94BE8E71DC2CEBCA1F314
+:109F9000DFD49FCEBF3F1EF8674B9381E2AB2D47C6
+:109FA0002724627FBB2FCEA4F9361C33D03DB217D5
+:109FB0007B8EBFA9B65B687EDA7C0A3F581A83FBAA
+:109FC000AC179A0CA4FF0A4DEE447B04BCEBF9AB32
+:109FD000BD7E35BE05072A11F1B21BEC109D1B1684
+:109FE000FA54C3CB9E134F12DEB71D5B948878BF23
+:109FF000A1D520E165688BECAF0F399320C1034FE9
+:10A00000727F10ECAE84DF2BCD5B2F17B83322C3E9
+:10A010005DE4F657E90F6C1774DA26E8B43DCA39E7
+:10A0200039D2BEC6B64FCD55E1DF5538D393E7DB05
+:10A03000CEF4E4F9AFCD4047D4B3174E1B48CF0E52
+:10A04000B1D7AB3511E851DC6CD0D909D96FB8D68E
+:10A0500078F5543B7AB1BDF735BD58A27D3F2578E0
+:10A0600063C4F3B1213A8873953A7C6A7EF495E92A
+:10A07000A69D47D7D1AF9DF743FDF8F4F134BB0E51
+:10A08000FB69AA247BB326E65DA1CFDF257DFEDE3A
+:10A090008F429FFFD889FCA423A33AA7A31C1D6964
+:10A0A000D3E32C365C8F6BE72183CDEFC584FBF9BE
+:10A0B0006EC18F3B5DEF8FE983F4ECA6FEAFFA3BF8
+:10A0C000EF0A7FE71DF477BAE33E10F7770EB96623
+:10A0D000707F2759A1EFC52C8DB9DEE889C0A7FF95
+:10A0E000D7FD9CF145B29F53E194FD1C6DFF60B715
+:10A0F0005DA1735863F264BF6737FE827926ABE2D5
+:10A10000C77B5CDB5D132FAB870342BE0F09FABC34
+:10A1100029F4F07E1137EC40FC135DCA055D78BE72
+:10A12000A2F8BCD3E674207DAA785C96574DF1F472
+:10A1300050CDBE7B6BA8FD910BD3CFE3FDFEDDF6CA
+:10A1400018CAB3ECC6F9C0128E983CE7F1FB15BBF8
+:10A150005D8A636984B87E488BAC07343F41E3CBAA
+:10A16000DDCD9F135FEE6ABDBC3DD5F497D6EE4DB5
+:10A17000F67A29E2E7FA66C6306EB892FED1DBC500
+:10A180002B8DA36F3FC458AF46B23BFA71DCAD01D3
+:10A1900015CF3FEF6C0926E2769D3B7048C57BE00A
+:10A1A000C52D019AEF3E97625733A95D299E8B7E9C
+:10A1B000F3E27B63F0F9AEF3468385F699EC24B7BE
+:10A1C000C5423EDFB968B03909BF2AED73045A3E73
+:10A1D0007F10E5D56755E9BEC8EE8BFD92C2F1F65A
+:10A1E000E8752AE993ED651603E697B79F378AF37A
+:10A1F000D601F21F76B466D9B0DCEE02F9217D11EA
+:10A2000024FCFFFE3A7E4E7527F4C7F58483E6A151
+:10A21000F141E0BCA13CD2F7767E2FC61B72F1B3B0
+:10A2200018C4CF81F37B62505FED6AE1E30C59D231
+:10A23000148371E6DBAD86589E57E99F84CF1B8758
+:10A24000DF6FEB87EB6A31F0FD1BE1D768E3ED2EA2
+:10A250009B4DF9FCDD2D3C0EDB7D9EE78FB6FBF9B7
+:10A26000B93526F498D67EFBF909637A61FEC06F92
+:10A27000A2F643987F651CB4DBDF71EB7574BEC634
+:10A28000378F85EBBD52BBECE794B4E8EC93671EC7
+:10A29000C981468723DF4DB8B192CED7733D39CA05
+:10A2A00028EB975DE797264DC0F16D7C7CE6E7EFE4
+:10A2B0006BF119FE18C3BEBB523BFCE68915D8DF13
+:10A2C000667ECE6C884DD6674786CDF8FD7C3CFF18
+:10A2D000BF2986ECEC765C3FF67F9451FE6C77F9F3
+:10A2E000E3A57198B76E664EEEC7C97ABDF4C2A6F3
+:10A2F000BD71D0FEBD0D0AE177649EBCDE9DAEEC63
+:10A3000087310EBED0CCF1ABE59334B9DCD39C7071
+:10A310001BE9A732781BF0F85EF9EB94C79EE39730
+:10A32000FB19B831469AF7FCA6045DFC26E7C7C1C5
+:10A33000DFD4F203B68A01A1F8ADB095E7D707FEE6
+:10A3400034A17F00E65B5CC6CFCFEBF3E2A38C16B3
+:10A35000D9CFD2E5C50BF57971BD3D17FED800B157
+:10A36000AF7189FF23EC9C966FD8660A4C715F83AE
+:10A37000FF30C808A10B9DEBF5241600FEDF10FE90
+:10A38000E52073DDDD29202A5B55DF1016E6173046
+:10A39000BB8F250D08C5B7834FCBF140D171992FE5
+:10A3A000217EFC12E3C955B8A74972E0E379D0AB2E
+:10A3B000F433D6C4F46E6802BA0E3CCAC47EC7BF7A
+:10A3C000EC45BE6AF842DBCF00D7A313EECF33F2E1
+:10A3D000B71BBF3013DF6D19CEED94E6A768FB34D1
+:10A3E00037B2A6E5A50A9ECBB6AE68027C6E3A32BD
+:10A3F0002B7501F4FFC1C7B4DDC9B6146ADFA7AF7E
+:10A4000093E2CB815A1EEAB8C1975880FEBA4592B2
+:10A410006BADBEE1F8D218FCBEC885A081F8B4F1DE
+:10A420002333C3BF0FD0B0C342FB390DC7CCB4DF59
+:10A43000B26D0797132DEFACF9F96F097D7E50F8D7
+:10A44000BD0784DFB24FF82D7B84DF12107ECB2E48
+:10A45000E1B7EC107ECB1BC26E6E3A2EE46F498CD6
+:10A460009F7FC796E765B579DED1BDE98411165C9B
+:10A47000FDF180B50186F65C9693510E594E462645
+:10A48000CBFA63B83D556A5F6ACD96EA87B1EBA413
+:10A49000FA1B5AFBE9E291C1BA78A444E78F8C9188
+:10A4A000E5F26858BC4BF1B51CEFDE141EEF6622D6
+:10A4B0009D781CB8ADE931A2E3B6D359F1E17ED95C
+:10A4C0001B426EB69DE6F6F98D33E76223F96D67A0
+:10A4D000043DBE16F468167ECA4D29AEDBF30B317F
+:10A4E000AE3867C6731FEDF1B3F6BEF6DE19FFA9ED
+:10A4F000B870FBF705058D21F8DB2D9FE452FEE4D3
+:10A500002AE563592C3FE7B65989A6FBF757BAD716
+:10A51000F29BFC2CB10F51D387EF8BD60CC4F20504
+:10A52000933B15EF3F6D56DC53508FFB7E678EF8E3
+:10A53000F72496E72B9AF037A07DE04792E1E725D4
+:10A54000C588FC1525C067996739E2C78AF13A3496
+:10A55000526D6E86EBDA64620D68E7998B39EC9D7B
+:10A5600018172118E7875E9ED5F9302F25C8F78F79
+:10A57000C1BCD2F73EF068167E770B4BDC27B35890
+:10A58000F9BD83E87C4F5D7E21FF9E6D7C3FECB77B
+:10A59000249BEFA306487F4F11FD1A6276A4933DDA
+:10A5A0006D4FAFEAE25C364FBE8FA2E79706A16718
+:10A5B000DFC8744F89F41D8C3F0AFC6CFB6A9C8ACF
+:10A5C000E31658E35CFCBB902E15EF81BDF1F5E876
+:10A5D000986911F86C7FEF697FCC0FE38382608DFF
+:10A5E0002AFE4E8541CE6F190248EF0B3633C9F56E
+:10A5F000605C70C2A5FD0D3923FB79839AE4F83FB6
+:10A60000B4BF5FA7E079B3367E428220FD8FF0EFC2
+:10A61000695C899FF4FBF6C7F3B5F3929E4FF01C7B
+:10A62000B11A6FA3F3359B8E58D7A31FA9CFF71D7F
+:10A63000FE80EB71FDFC1B3F98948AFED7E6A137A4
+:10A64000A7A21C6F41054FDFEF5938C925C1B07E65
+:10A650001BEA7B26BEB355CDEB476970CD243C3F4A
+:10A66000B365186FFF49FE9127F17B605B6E13F5B0
+:10A67000BE4778BD06B3459386216C32103CA917BE
+:10A68000B487FE7EEAE93A8EFC199DEF3A81E59F98
+:10A690005076A01CD1D3F519C2C791C760DD477BA6
+:10A6A000B84E86C3893D5CA7C2E1CD6DF6A5C5163F
+:10A6B000BE7FACF1E1E1631384DDE1741FAFC5350A
+:10A6C000C55797E7FF77C1A76F0B7D7548D88F37C0
+:10A6D00085FDD88FF683E2616E3F1AC5BEF16E61CB
+:10A6E0003F768AB8371477B9857F3159C4C33C0E99
+:10A6F0002B185ACAE35EBB96E7CF30468A87C61549
+:10A70000C87EE2D87CD9AE8CEE9628F169795AAA37
+:10A710002E4ECED6C5C9B25D2931F6D7C5C98375CF
+:10A7200071B21CF716378FD6C5C913A4F6C7F31D2F
+:10A7300044D7A2E3B7EAE2E5E952BB101DE57D9BF1
+:10A7400010BD6644A4E396E2190FFEDFA263E4FDA8
+:10A750009AFFFFE8F80FCAA3CD20EDDFE8CB77849E
+:10A76000FD7F4BD88D83C20F3820F21CFB843FB78E
+:10A7700007E9D81DFD3AA7F0EBF8390E2D0FF28648
+:10A78000C8433588731C5BC4BEDB2691875A56FCD0
+:10A790003D3FC77191093ABE1B918E154ED9CF1B13
+:10A7A0009327D371942351E7F7C97EDE70BBECE7A2
+:10A7B000955A653A0E63FD757E9F4CC7A12D253ACB
+:10A7C000BF6FB4CE4EC9E738C02F78B45721DE4BE7
+:10A7D00090CF731406E5F31C7AFBAEDD57D4FC86EC
+:10A7E000363FC12BEF336F421B8AFB452966FEBD06
+:10A7F0000DA3A70BFA1D1ABEFCBDF839C42D9FDCB2
+:10A800004EF82C447B1EC17EFFA917B7FB7FEA657B
+:10A810006FBB1F19DD0FD39B3EEEFFC48FB5F373E3
+:10A82000552C88DF9FBA8CDFF4275CAFE62F19ED3B
+:10A83000350CFD08D562F0E1F777996AA573778743
+:10A84000DBF1A34EF5CAD4BEBFAA60BF9F887E9538
+:10A85000E237F9B9BC5EAECDBDF05E4FA9B305F3EA
+:10A86000E29B3F323B6B919FA3F87750F4FED6E119
+:10A870005EB9D49F863F3CFFFF0BB48FF8A158FA16
+:10A88000DEDEE73AFB090B867E5E88E6F091974FA5
+:10A890004DF2A585ECF527BD2E903DCDB57599817E
+:10A8A000F1B2B2D697C0F72B03245F7ABFAD5DFF3C
+:10A8B00057E7A79DCC7305116FDFA35D2EA47355D9
+:10A8C0002E63BFF6DF7F21DA7D17FF1E8C4BC5712B
+:10A8D000353C69F58704DD0F8BFEDAF0A2F1157EB9
+:10A8E0009F2621EC1EAC6EFE1ABE561ED91BC42339
+:10A8F0008CD7BA1E6D1D11F8C77D05BFFB7BA2AFBB
+:10A900008E7FD858A7B8A71BD9EF33093F329CFEDA
+:10A9100083695D7E6DFD6C783FBCFFA2DD5BE7FA6D
+:10A9200050BB339360AFB367821CDD7E54A5730EBA
+:10A930004CEC831BDBE859ACA09D318E505862581B
+:10A94000DE55BF9FA8CF1FE8CF9515377791E0EB75
+:10A95000CFCBE7CA5C177B5ED6AE94D986E8EC52C3
+:10A96000A9CE6E8DD1D9B5893ABB27E7C58DCCA8C4
+:10A970007D6748ECD72B0EFCFE8E916328BC5E7C75
+:10A980000788E37B793BF2DB767EB69783F0DE26A1
+:10A990001FEB9883D3CF27DD33516D1EA2F3A303A2
+:10A9A000343BE6A4B8D71C1844DFF3343BE5BFCFF3
+:10A9B000E0F75A3F2ECBC17B368CCA67BCF68FCBF3
+:10A9C000E83E4E32954F791DF47CAD378FCA27BDD6
+:10A9D0004E7AFE84B788CAC7BC2E2AEBBCE5543E2B
+:10A9E000E47553BBD5DEC904AFF27AA8CC02F706F2
+:10A9F000FFDE40968F3961C62C7B158C1786E74C9D
+:10AA00001FCC230C8F5D17DB2538BD26596A9F5A52
+:10AA1000E590EA533C79527DE7C94E09EEE82E9263
+:10AA2000DA2796BB24B883AB5C6A1FEB744B704C7F
+:10AA3000DE64A97D94C323D5EFB97E707CD365E431
+:10AA4000B9CEEB3A817858ED759FE0782A3FC1F195
+:10AA50003399CAB9BD3B107DEDC67A17DA6D7BBE5E
+:10AA60009DE1F976B395DFFBEE60B42B1DC2FAEFE2
+:10AA7000E082FEA4F9427F523CE7E7E789F3DC2756
+:10AA8000E4794F96DE0319243BA9F931C3D5B458B4
+:10AA90008CC71E34D9FFBD3FCCE381E12AC37B2B99
+:10AAA00047CA26525E04AF6CB2087AF40BE19FC627
+:10AAB000F4B652BC38FE0985E23B584905E61167F9
+:10AAC0001DCD7686FF3D28AD3CFC1BFEBDA1983D0B
+:10AAD000DB1C98171B5F3C2D312A2CFE1B1FF8B185
+:10AAE0002C85FAEB3B200AE6317EED34F38CFCD06A
+:10AAF000FAB476B39E90FDD110FFFBADC21FA775CF
+:10AB00006AFA69B57D3D3D5F9D77F97D9BB3625DD6
+:10AB10005F097FED0BE1AF9D127EF749E1777F2A58
+:10AB2000FCEEE3C2EFFE58F8DDC784DFFDA1F0D7ED
+:10AB30008E0A7FED3DE177AF147EF7EABCF5F4773E
+:10AB4000AD2E6C54987A99F3A57337C8EBAC5A279D
+:10AB5000EF1BCE7A42F6BB673E24FB6BD397CB7ECE
+:10AB6000F71D8B657FEDB61AD95F9B5225EBC75B4E
+:10AB70003CA5127CF364392F77935BDE37D4E8343D
+:10AB8000B15CD6939664D95F6B6FBD5B03A354FC35
+:10AB90003B2448CC5361F630EC7BF0D279C702BB42
+:10ABA000AB14F76B0A997B19EEE70C3504DFC7FD90
+:10ABB00026F6A14ADF816CC0370681BC5E1830766C
+:10ABC000BC23CCEEF864BC4E3D2EE7476EBD47F685
+:10ABD000832BE7C9F18CB95CF6835D69F27EEC44A6
+:10ABE0009DDD61C21E9AF9EFACCC7D793B648899FA
+:10ABF00047F795AED51E9999FEFC18B747346E9667
+:10AC0000544FF628AA0F3F273140DC53A88D1AF87D
+:10AC10000EEEDFEDF988DF2F00B407BBC1FBD733A1
+:10AC20008E6FB375247D3F6EA789DF1BD89D62733D
+:10AC30002E85AAEB2FF2FB01ACD548E7C73C786F15
+:10AC4000240BFB95CF8F15068DD2F932B3AE3E0D96
+:10AC50006DE265E7C3CFD1FDEFCD479CE3E8C3FAD2
+:10AC6000D0F988A6C8F70DDAFC381D9F6AFAA7202C
+:10AC7000C0FDA38276FDA3A9F49D31E3878CEED9B4
+:10AC80005B0C2D679EC3FB515FF23CEC3026C76D19
+:10AC9000378E95E3B6E1F6CBC76DA31C32BF8EC9E4
+:10ACA00093F5408553D60397F8354DFC1C627B7EA7
+:10ACB000CD4D7DB2B47B3A849FA89C7D317C1F939F
+:10ACC000F3CF10B1CE47CD6EBABFB23C9D119D8679
+:10ACD000D8F979C55ADCB7C1F37F1FF07B2F46E660
+:10ACE0004EEC83E5E911E2FCE25827F5D7CCE955B3
+:10ACF00004FF7ECEBAF47CA2256894BEBB61646179
+:10AD0000F485FA39C85F1D437CF47F675EE2FB0877
+:10AD10001A9FD912AEB07FE793FC40AD1C1674A900
+:10AD2000B88EFD76BE8FBA3F5813C4EF447E9FCCD9
+:10AD3000F314F7A74D30F2EFB6B86CC3812E23C4DD
+:10AD4000FA8BC43ED9162F0BA23FB7C96BA552DBB5
+:10AD5000FF5C99BC2811EDE6960C4F2A9E0BDCD2C5
+:10AD6000B1C372067A7AB3A9435AA47B048DA68133
+:10AD70006467B734A618D10F1D66B41BE97B52690E
+:10AD8000D355CCCF8EC4FB26490833DAA7DBE40DBC
+:10AD900004CBE85CA887CE11C13A4AD18F2DB34FBE
+:10ADA000A3BFF7D8F801C88503FDE30E53F1BD7DBD
+:10ADB0001DF9F96B8B9D9F6F1D91349BE855E0E465
+:10ADC000DFEF2B48B339FDD85D32FF8E4F15FCE322
+:10ADD00074E17602E45EFABECF40160623BD74F03D
+:10ADE000D37A3DA03B97B8F298383FD71479DFE685
+:10ADF00033E1576C117987E3C2AFF858F8154784EF
+:10AE00005FB15297077A5FF815FB441EE880C8E7E8
+:10AE10001D14F9BCB7845FA19DBFD6F822791573C4
+:10AE200058E2197B771AC773CA2AC55F0EEB289DB3
+:10AE3000C9E1E4C57C7FB4ABA7CE5D5280F526E7BF
+:10AE4000485847F2E4BAE1B88E94A92D744F69B21C
+:10AE5000C7EC7029783FE929BA17A5DD0BBB93A38E
+:10AE600086DD3E7304E9DF3B3DE2DCB1DA5C48FCA1
+:10AE7000F58489BE93A47D3F6EF24CF97B4AD3756D
+:10AE8000F8BD5D079B15AE47DED1E4A23FEB1F8EF8
+:10AE9000F714D136EA4E719E172F5D459097B50293
+:10AEA000EF1A5E1AAF1F1DCBD7C1F7432DA29FA388
+:10AEB000C5B7C6623F1FA4F1FE260879D0F7B75A7E
+:10AEC000EB4FDCA78916F47FB4E7E5CF9D1EF63281
+:10AED000E99CE961419FB67E4B1E34E1F7B4270738
+:10AEE0001E48477909DDAB71C5F2FB2B63FF3D13AB
+:10AEF000E8B45ADC43D0F4EACD427EF5E37DE0BD10
+:10AF0000FCFD9D0F4AA698F07BE837057EC5FF1E25
+:10AF1000B0B12639FCBCEF07383FD095F7DF743766
+:10AF2000FD1DC96006E707CB8D16077E67B06B9ADB
+:10AF30006B05E23139CD395CE447C99EFD3FEE81B6
+:10AF4000191B0080000000001F8B0800000000009B
+:10AF5000000BED7D0B7854D5B9E8DAF34E32810958
+:10AF6000049C604227E161AC04262FF260083B108C
+:10AF7000344524131221981026099068D11BAA3D4C
+:10AF8000D27B68B321218418799C6B3D50090EF85F
+:10AF900068CFB99E1AACD7D27EEA8D8AD6DEA312CC
+:10AFA0007A430B6DC5F092F66B7B2F5ED49ED3A3D4
+:10AFB0001FF7FFFFB5D6CCDE3B93800AADF634F920
+:10AFC00074B3F65E7BAD7FFD8FF53FD78E93C18F57
+:10AFD0008F314BC25E65423263CE62858D87F6A6A5
+:10AFE0009245694333185B5EDDBC98CD64EC12FE7C
+:10AFF000CC83E7CCA60D65E24BCC724981FF8799E3
+:10B00000CF361BEFE31DC37376291DFFDFCA82898C
+:10B01000703F78CB6F719C6AD6EAEF87FBDD79EAE7
+:10B02000040F8CCFEAEC67875C8C65C2EFA58CE8D7
+:10B030003CF25ACD6CF45C8EB76431F497E3339AEA
+:10B04000CFF07C6B17F339C742E323806E22BC2F0D
+:10B050009E6DB5855D385F77F05E97EA662C23D5E7
+:10B06000D2E004782AD236AF64B06E56E9F44CC30D
+:10B07000F7030BDFCECD836BE65A1F2E0FFB354354
+:10B08000BFE33776A6F96644E1DABA8D9584609E0F
+:10B09000AD697FE75D9B88FD3E6C0B613F3BABE993
+:10B0A00083F1BBE7FF2E35DD1DED7F7056E94CFFC8
+:10B0B0000418B01CFE97C2D8744728C33F63F87ABF
+:10B0C00019D3189B80F88F670CE038D3A0849D00BB
+:10B0D000574D0FE06F0C3EBFD082F71B7A9CBE6EBF
+:10B0E0000490A9EEDB609D6BF93259C3B48EFC7EEF
+:10B0F000B8AEED01BA61FFDDF6D3882F17FC227ED2
+:10B10000D35A6DA723F8C2FE4CD7C6794C6D07CE33
+:10B1100001F0DEE24F4C7EF726F8772ECBBD64E5DA
+:10B12000F447FCD688BE710D556319D2D30BC82CD9
+:10B130001ABEAE15FF6665FDE319310CCB8FDE3FFD
+:10B14000B17A4A7C08DF43BE7109BE9A453CE97377
+:10B15000CC46FA73BEAA167C05ACF912F19566D7F7
+:10B160002270C2BAD87DF628DF6518C66308EF32B0
+:10B170007D9BDE578F4D05F8570AFE5F1968E1F891
+:10B18000BA8FF3A30B6E8A71A2FC06E3044DFC4751
+:10B19000F49A28E084716E2F2BFB1F3F059C3DBE67
+:10B1A00033E336A4D3EDDFB4322BCC5705DDB05DED
+:10B1B00055A384C3D05E16B899E461997E7CB85FCC
+:10B1C0005D6D3FABA7CF3B1BA7D038ABCAF9386C3E
+:10B1D000A36E7E826F27E133C8D8168F8EDFDE4DD7
+:10B1E000675319E0F1A53DCDFBF0FD73BB9C0CF955
+:10B1F00088E1BBB391EE1CAFC7807791FFCF6F534F
+:10B20000C20700EEB37B9C04E7BB6B943043FA3378
+:10B21000CF93FD70FF017F12CD732E2EB4EF1BF084
+:10B22000BC716B825F83F5768D6BBD2708F39E4BF7
+:10B230000AD5E3388D5B6FB268D0BF2B5E7365E0D3
+:10B24000B88D56FF019862850D703A0EAEF0EFEBA7
+:10B25000E1DAD0A5A31FFC37E85788EF975858A824
+:10B26000CF3D9C7FDCD90ACD8F0877EAE05F926101
+:10B2700021788F3FE42478C764FB689C86C2383508
+:10B280006E0CD291A9B61C8027559D8C709E55409E
+:10B290003E81DFCEDCAE68881F66E374715C3F6977
+:10B2A0003FCAD33F89759E7DB06032F2F39924FE88
+:10B2B000FCB4373E8CEB3AEDE36DCDEB0E3F81B243
+:10B2C000610B652E4BE4EB50800F1A055C8D3E8BB5
+:10B2D0001A07F46D7C68F95791CE8DDE9EF5783DA6
+:10B2E00096A8252AF0FEF93D5686F8467CB872F0FD
+:10B2F0007971333E37E3E5037F06C183F81B0F788E
+:10B300007B77777B6208D6C13C2CE49818C543C391
+:10B31000CE1FDEAFCC2479D6B8BC733951986E3FBE
+:10B3200006FE5DE17368E5300E3B3C95F876858757
+:10B33000F3ADA368CB840CDECD1DE10F1FB57B7090
+:10B340007F6F14ED06E45BC0EB0A949799888F71C8
+:10B35000B3FBE17ECD6A23DF6E49DEFC6015AC7382
+:10B360004DA19D59E1F91AAFCD2037951B8C720480
+:10B37000EB36B4C767335A77D738C19F9D9C3F815E
+:10B38000D32707B3A27CD1EBB748BEF0D947C1BFE2
+:10B3900019AF5F343C9C467E057D7326CDB7AF88E0
+:10B3A000F402F00F878B5975F2D0D0E524BE67C048
+:10B3B0001E8827E04F476556945F247E1A766F22D9
+:10B3C0007E6C107CD7D803FC3346C747267CE19AB5
+:10B3D0006D729E29513EA3E731F8EC453F875BCA69
+:10B3E0005F030BD633EB70B99657A27331D0B36FAE
+:10B3F0005D8D16C0513492E31D25C56389DF053D7F
+:10B40000B8EAA11F17D22D51D2476383B89FBBC59D
+:10B4100043CF06E54419E81BABD8671DEA40B81FC7
+:10B42000EE276DB0D27DD42F36E88FD33224F8F3D7
+:10B43000054F4F87769C68BB055DAD56770AE22BBA
+:10B440009119ED9E71CCA44FFC9CAE52CFEEB4B3DB
+:10B4500014DC8FE3C4FEDEBC708A82FD762A0AD932
+:10B46000078E32231F584D7A605AB685D62FF1C009
+:10B4700084BE75B8F87AE3522C24171FA482425573
+:10B48000A2F87088F58FEBF7F5F5C3F37AAFCB1F11
+:10B49000463E621ED20FA53053BF6EDEEAC509AC30
+:10B4A0005F47E7859EF186F62DDEEB0DFDBFE29B43
+:10B4B00062787E6BE64D86E7B7F9730D6D07D3E9C9
+:10B4C00075847388E3DD21F0AC7B2EF5F200D2B1F8
+:10B4D0004AAC638723E40DC23E5CE55D4BFA7953C9
+:10B4E000C95DDE215887D3CBE5CF81F6248C1B378D
+:10B4F0006DB587EC08A19F0BE117E9D08E83A444BA
+:10B50000F9CC61C2B359FECCF6E4DA6CB07B12A080
+:10B51000F165F665B27BDCE362DA3766FB0D7484B5
+:10B5200005F9355ED06BA1D54D7A636B35D8730ABA
+:10B53000DA974BB9BD94F95F88AE41D18F6916B2E5
+:10B540005B9789F54BFBEBAD36C6FA6F007CCCE719
+:10B5500076D6B2C20BD57ABB5C5EBB453FD98E2F87
+:10B56000DCAFAA31F4694736DF371302FCF9321732
+:10B57000B3A11E92CFB764737DBC4CE8ED2520C704
+:10B58000C8B71578D5D9ADBB049FEE8AF02B1BC880
+:10B59000D1CBE9538A0DF110279AFB596857F6046D
+:10B5A000C4B3469DACEE2023F9FE08B03B9BEC18DB
+:10B5B000FA29CD5EDDFB75F447AA13FDE85B38D5AB
+:10B5C0008627BE0DF88BAF4EF05B7C517E27BF0304
+:10B5D000DAC9999CDF6B525D7E7AACA983536747C9
+:10B5E000EDB26A61DF4D60AD2407C3FC1817E7CBED
+:10B5F00091FD18BEFFC8F99C62FF67D68D7EE2BB45
+:10B6000020DFF72DF08B7C777B8D91AF968746E717
+:10B61000B31F640BFBBA8015109F85D6115F3845A8
+:10B620009F1D93815F389E883FE2257E85BD6DB763
+:10B63000B17E1BD0E908D21F8074DB5922AE734063
+:10B640007D85E4622093D9F57C100C58D5B08E8EA0
+:10B6500003452CDE03FA65C0CED27641BF31EAF253
+:10B66000451E58DF40A933B18136D5B0C16E3F02C7
+:10B67000E39E72B311ED7DB33C4C877FA01ED89A38
+:10B68000F6AE17E1D96A67B4DF3376B106E1DA2E98
+:10B69000DBDAEF6A4AB11D27DB1FEE56A1FF93F1FB
+:10B6A000BCFD61F6A5DD5A2AD18BF82A41D0234191
+:10B6B000DAEF337478053AB89273689F7199F06D38
+:10B6C000B6EBA59E30EFC3E6797F27F70341A7913C
+:10B6D000D63D0C5E60CD2F8F2E17EFA35CB8C05FF8
+:10B6E000D6CBC5F071FAC97EAF15EBB6243C9F16D8
+:10B6F0008AE14746F0BFCEFE7BBDBF00783EA4A0E6
+:10B70000DDABC2DBB319571D308E52F8DABFA3FE92
+:10B7100057766BE3108F56E8807ADECE42048F9422
+:10B72000D738E4032BE2BD9F9E83FE1D52A6E02086
+:10B73000751EE45F05FA5F42FC5CE93E59CEF5DA1E
+:10B740000AB1FF55E094305E45172B45FF3C6E4D26
+:10B75000D3816DA8E754275A1470FF4229C207CF3E
+:10B7600055275D2FA84837E06783DE79A9E44FBFEE
+:10B77000790CDEEB1CB0FA9D306E67E0C70CEDEE85
+:10B780008B33981F17DD811D01BEFA9067A1C38717
+:10B7900072D37FBC631A63A7DAD840997D38BC03A3
+:10B7A0002FC7397CB0D8909634F35918A7ABD0E99D
+:10B7B000417BEE9D8D5607D26960738386C83891B0
+:10B7C000A2F52970BFCB1662E8DF3B36B62F44FEE8
+:10B7D0003E61D7FCE3E0DAB559BB1BFD10D5B7B825
+:10B7E0003C1DE03FD0652B0FC7D89FD7E7707FE7A0
+:10B7F000AD97EEA4F51F4971F8E360DC218C6F0072
+:10B80000FD8ED877A6F971DC4DFF2D0DC73FB266CE
+:10B81000ABFF6580EBC826277A52ECC81E570D8E09
+:10B820007B646EB377AD6E7CD7F58E56BC3F30C966
+:10B83000E19842EB792FD18BEBD9983B1E79B3334A
+:10B84000C531B9099FAF6D66B85E8777A71DD7E789
+:10B85000B2B1DDB8BF7CC97BE1CD02F4977C96D94B
+:10B86000B740FFFFEA0FDD9A83FEC986530B512FC5
+:10B8700039CA92B6E0B553C029F72B49DFA19446E7
+:10B8800017EE639DAB9B781CC66B69203AA6588265
+:10B89000B81F7506D6B8A6CFE0F79BC70CC74B27D5
+:10B8A000C65D66219C6BBD6BB3B0DF876D21E83749
+:10B8B00034D759130B8FCD395C8FB9DA9B333600EF
+:10B8C000DC9D7B5C1EC44FA712DADD0078D5D2DD8B
+:10B8D000FE277CC3DFFB81784FF207D089E4707DBF
+:10B8E000CEA43D9A0DED554E47C08BCBAED39B07F2
+:10B8F0006795AECBD1ED93C3E64DE9247DD1A97018
+:10B90000B9FE414ECE1E0DC6C9F587EECB81F98E2C
+:10B910007481ACCDA2754E467B7F24F91912CF3BC2
+:10B9200037C1BA63C8FFD06A2BBB612CBF5E07D793
+:10B93000E99BAD939518F8199ADB948171AA23F0CD
+:10B94000DC02E30CED71F12BDCCF40FE1A813FF3FA
+:10B9500072B8BECF9A19ECC6F5B2197E8AF3BD99BA
+:10B960001DECA1366BF562FB0BC0BF8F7D4EF897C7
+:10B97000B149C0AFCFCCDCA3814BCA3CE30C76EB22
+:10B9800048FB67900DD9703FDE54F2A716F407BA52
+:10B99000B31C3EA72E2E28EDE825995CBF05A79D78
+:10B9A000CD839D9B55CD584BFE0DD8CB141FF4C0B5
+:10B9B0006FACF86010E3813A7DB8C4D496F6E9BF65
+:10B9C000E608FB45D8C9A9BE9DC1F9E87FBC61F571
+:10B9D00087016F69F802B42B172B61B4D73795FC38
+:10B9E00033D9F14CD8714B049CBF6C73B1B2692C44
+:10B9F000E2CFAD10F7135A4E3D8EFE7502C63F31B1
+:10BA00005EDBE2F451FC05890FF35789F549BF8EDF
+:10BA1000EC4858CF8A16110765BBB8BEB106F29143
+:10BA20001F601D06BF24C84C7EC86ABBC19FAB35D2
+:10BA3000D90F66BFA1CA6437EC40DB09ED425B9FBA
+:10BA40000BF9E9FD193947327CF458EB97F63DF4D0
+:10BA50000B150E6E19D2ED3F8342FFFCAC4D3D81BC
+:10BA6000FA684BF03117C6E1BB6D6117EA93EEF24D
+:10BA70007B1391EFBAEBACE5C86F036DE5D4EFAD86
+:10BA8000B6205D6DB95C6F54FAD58F703F91F65951
+:10BA90005579E9890E1D5D2BD5AF9CE8D0C15F516A
+:10BAA0005869684BFEAAB0B2D6BE18FB4B5EAE8C8E
+:10BAB000BBA8CC608F5A9FF28762EC17F21ACF6C4A
+:10BAC000EFEBF1382ED768F73E3063FED8D1EC1992
+:10BAD000B94E891FB97EF97C2478FF2347FA279F46
+:10BAE0000DDECC4F08AF194E09FF48FD2B70139B9C
+:10BAF00084F076ACD066201D4385B980E7AA326514
+:10BB00000BE6657E26E2953F0B24863580E7D54C13
+:10BB10001EFF8C6FE17E657C59E542DC9F3E29BDAE
+:10BB2000EF2854483EAB034A58857FDE2CFCD55F96
+:10BB30006632CA3F80BCBE9908ED5FCCB5F338329F
+:10BB40005317DF363BEAA7C6D7F1FCC40E07F3F75D
+:10BB5000E37B37BAFD9BE1FE32297F35C63C447555
+:10BB6000B5DDB0CF5498F20EF1A67D6679AEB0BBCC
+:10BB70006703DEA744F13E92FF31129F30DB853C24
+:10BB80008C8B99F1738F093F667FA7E279937C5C78
+:10BB9000A1DF73A02BEFD564B433CA14FF34A41F04
+:10BBA0003E82F7E2D583940ED921E548F87B325FD7
+:10BBB000B5636915F97B6FA13D3096F24D93315E07
+:10BBC0002DC7977E5EAE5FFD466EFEC8700C8AF78D
+:10BBD000B656C6B61306D14E98C5AFD7C175FAD2C0
+:10BBE0000569B1EC84C1226127C073B40F06F794D4
+:10BBF000F36B91D14E60E5B997C1CB265A6FDCB497
+:10BC0000BCB1B1E46E7056E8E1DC09D17642662B36
+:10BC10002BD3E1FDABD9EA3FE27A2B451C42CE079C
+:10BC2000FAFDB0DE0E33CF7728C7C3F15C3E9EF439
+:10BC300085BC5E8E7E364F2B433E7BC0AED6A0BD0C
+:10BC4000678E27FD3097DB895D196A0B3E67EE9C96
+:10BC5000CB8CBB49C6AB33B327F2F403C57D4CFE96
+:10BC6000A0F49FF6E3C3FCA85F68F370BF303EF515
+:10BC7000C2610F3C5A971B7A1EF135F74258B380C8
+:10BC8000DC39172B643F395319D93D57EC875D6177
+:10BC9000BF2E146AE0E7AD8D3C1E5F9A6DA3767CE3
+:10BCA000C87A80F605531C275E7D8FFCB02560079F
+:10BCB00088B80DD953C7853D1564ADE4EFB9ED6182
+:10BCC00017C62BCC719B9A544BFF74D0EB3585175C
+:10BCD000AA7D33E97D43DCA7C69771788278EE812F
+:10BCE000EB92208F032DC338108E5F1DEECAC03C2F
+:10BCF0009CDFE65719F7F3D0BE58DE747FD6C3BE7B
+:10BD0000AB170792F125692F4A7B06F44BD778A42D
+:10BD1000CB02C547BEBF294E648E0BC9B88C397E95
+:10BD2000648E177D9C9B4EF490F6978CFF7C946BF1
+:10BD3000B4C3AC3037F6EB2E822D15E4BBDBCED28C
+:10BD400076CEE0F11DB4978E94FEC483F68535CF90
+:10BD500014E7BCC2FDAD13F6A133B8AFBE126747FE
+:10BD60007B3BE80D513C7189629493C9797C9FF3C8
+:10BD7000E4B9F93C228FDCD9B641BEAFA1BE09A619
+:10BD80003AC2714A741C56987F45F2949CAD4ECAD3
+:10BD9000CB277F2415AFCC0FFE4816FA231ECEDF2B
+:10BDA0008513683D4C9DC0CEE8F3C602EE081C2EFC
+:10BDB000F05BB23EF9FC2988E7FCE83C97C3DB8ED8
+:10BDC00092629703E31140632BE72B4F247E9F8100
+:10BDD000719D753EBD5D518F798B5CB43B795E433F
+:10BDE000DED7C5CF6DC8BFF1A9213518635F5D955A
+:10BDF0006731E44F23F1F74C46F922398E8D7937BC
+:10BE0000911CA0AC4A78AC31E2F402DED5420E00BF
+:10BE1000E12E27B04CD34E2BE375095C4E643EC235
+:10BE200056142C4F87F5366D53286FCCB49AC368DF
+:10BE3000DFAF11CF1D22FE66CE23AD117918665DEE
+:10BE40004776DAEA878CF9B5C61E63DB6C97CB7848
+:10BE5000BF0D8044B8DB249D40C15B47C7C37E5AF9
+:10BE6000E75F291E241F2ECEFDAA17EB5A3AE342A4
+:10BE7000BB1B30AFDDEBA27808F990282FFDF00B4B
+:10BE8000EBD9B6B7F0315CCFF63C2B977B85D7B9B1
+:10BE90001C4E79D835A4E3B7ED82CF66E5F978DC9E
+:10BEA00005F72550892C3599E448D6B51C49E1762B
+:10BEB000A523C0EDC6A7A6BEBC94E75D797D4B6601
+:10BEC000205ADF520AF8C912F8C99CB6DADF0FD738
+:10BED000AC00AF4B9AF1ACD15FBD35D36857669AD1
+:10BEE000FD5553FB405EECBA96689E4DC4DD05FCE3
+:10BEF00066B9FA5E1BCFB7FC33F8AD787DAACD43A7
+:10BF0000D7EFB779E9DAD7E6233BED99B64CBA4AD1
+:10BF1000BC3F600FD6635E4BC621657CBC3F8FFB88
+:10BF20006F2CC0E1A8106B59684D4D443C1F0D703B
+:10BF3000BB70A4FDA5AADC1807BD3D68CCEF2DAFF2
+:10BF400031E6F7EE9BA9BE9407F024CCF4DA43BAAD
+:10BF50007CD41AB1FE1D0FF37C931CFFE83739DD4A
+:10BF600065FB9C58FFCF045F24BC9C62F701B12A9B
+:10BF70001FAABC19E3F6CC937345F6E02F855C2627
+:10BF80006CF6D8312E54D9BFC281E3ACD90DE3B8D9
+:10BF9000AF7C9CAD6913D38CF985AFDD81701C8DAE
+:10BFA000E4175AEFC0FCC251915FF843DEBDDF4198
+:10BFB0003F6B569E7A1AF5862B4F3D83F8F883D057
+:10BFC0009BD03EA76FC3CFEB4913478DE3FF212FD3
+:10BFD0007F781CDFBA40698D55D7F2A19017D05BEE
+:10BFE00017711EE68AC4D13EE06DAE8FE2F2397E53
+:10BFF000DA7FC95A709CF61FB3966762D8F32C5F3C
+:10C000009171B98F490F7AA51E0C5E8A359ED5595C
+:10C010003919F17DCECEEB62CCE3C5E53B247CCE75
+:10C020007C7C3F35025F5C7E7E74BC1D808301A4F6
+:10C0300093CD9348794D7637E53F251F25D47B6E08
+:10C04000C3BA05702C19EE2F09CF796ECBC338CE49
+:10C05000CFA7F89F6023D3F5B782BFCE0BF93A87FD
+:10C06000F205727446C8D729942FB89E14F2F5EBE6
+:10C07000363FB57FD95648EDE36D2AB57FDE564E83
+:10C08000D7C1B620DDFF595B0DB53BDB42743D5A8D
+:10C09000F6D8CDB8EF7CF03D85F4F148F0DCF5B88A
+:10C0A000D5203F2D7B130CF2B6F6A1F186F6EA1EE1
+:10C0B00063FEBCB1638AA1BD6A83317FBEB2D598ED
+:10C0C0003FAF6D9963986F456881499E6F35C97B15
+:10C0D00095A1BD309FDB8955E5B586F79CDE4643CB
+:10C0E000BF84A52C148BFEB7E5F3B8C9CB25C56377
+:10C0F000874689733836DCFA36DA2791B62DC4D0F4
+:10C100009E776C5842F71F88E3FB9DF9BD26C1AFAF
+:10C110009D65AB83F319DA458BAC7ABBE79E59A1D9
+:10C12000E5F93A7FD0E1E5FED8C5A9D5562FF0D183
+:10C13000D2B2F75EBD0EF82834C0C8EF51C1DCF3AF
+:10C14000821D5CD8BA6BC175D0AED6D61BFCC7E2D7
+:10C150009683AF80F8B240D9D1F664783F3F3BD4A4
+:10C1600084E397782FBC82EFCF5F9C6D43367F20AE
+:10C1700089913D7A2ECD113E10831FEE1770CBFCB6
+:10C18000D527DDA7CD79FA8C4C568A71E48CCC0B7F
+:10C19000A5A8D7A0AD62FEEBE0ACD0FD081FDC5730
+:10C1A000514F3E90B53603F79391F2468FE41BE36F
+:10C1B0000912AE1D251C9EA322BF3064CA2FE8E2DF
+:10C1C00009EDF9A3C413CE89F786BE1D3B9E704EC0
+:10C1D000E41DCEC9BCC3C35531F30EE7168A7802FD
+:10C1E0003CC738C2B93D35FCBA70F4BC835C1FEC67
+:10C1F000477BF20D790761E78BB8F9E02C752F3E8C
+:10C20000FF6AB6DA8BD73F66A9FB108F4775F94FE7
+:10C21000CF445DFEB3EC2786FCE7A19CD093F93CAC
+:10C220006FCDD0AF6AD7D850DC14CCC706EF89C524
+:10C23000C7CFE4CBF862FF67CACFEAF2A8964B37C4
+:10C24000B12BCE035C71BF425E9762B66F121023B2
+:10C25000E3A276DFD379A19F20DE3A929EF3F1FA32
+:10C260002B4B74FF40E537823D649E4F8E87FA0A60
+:10C27000F5D620480CEE33DB932ED4A19F724CD020
+:10C28000D37C3D9E2FE8C93CC948DFA7F382BF207D
+:10C29000FDF36C9F8FEADAC4FD2B85E34947F06D0F
+:10C2A000B4633B1BADBE03DC6EA7B8C50D81A470A3
+:10C2B000B72E1F7C11F7CB7C8C3F0E4D7500BDDB7C
+:10C2C00043AFB8B11EFC9DBD36AC8861DF4DD4ECE8
+:10C2D00048FF9A4CBEBFCDF786BE34348A9C033FDC
+:10C2E0008CB778090E8BA590CFCAAF9A825773FF8F
+:10C2F00081BDEF4FF0C178DFEDE5F9AF1B7A57BB99
+:10C300001A75E3DF305BEC97C83379989F54C258B5
+:10C31000A85E1378EFCD02CCAFF82C14E77867E372
+:10C3200007C79663DC51B552DCF19D8D17A97DDC02
+:10C3300067C945F2BDE3FD7FC7B0FF0DDF5C3391F8
+:10C34000FB2D1C1FAB36E63ED99D4E7931C76C984C
+:10C35000E7B87A3171CA8C68FE6C95C282B1EC98EC
+:10C36000C9B339FF2F525BEF40B816859C0CEB9C8C
+:10C370008F376C7D1BDBDF2D557C56F4EB33F93C9E
+:10C38000357B6D544F0BF85987ED37FC090CE79D51
+:10C390001F3A68C3FE1F6629EC3AE52AE255BD380C
+:10C3A00001E5F01DE4BF18F05F94F22BE468BA0DCC
+:10C3B000E43E07F17FD8AD8F534A7ED2F2D4CCD978
+:10C3C00014F70BB504C9CE5D7A19FB7433AFD3FEF5
+:10C3D000DE051BE61EE21F6F9D84F1A561708E00D5
+:10C3E0005F91A0FB1FF3791CF3865EDB9B5F417EB0
+:10C3F000DE68A73A845979C139B3F5FED655DE37E0
+:10C4000064FDDA40213F8F00E634CD03F066DA00A8
+:10C410008E3825DEAF71B9A2F89C4BEC7FD04F1D52
+:10C420000BFD56B1BE7E8CF3319BBAD38AF1C32289
+:10C430003BF9C7CB57DA13912ED17C99DFE06F9887
+:10C44000AF67303F46751A2EBA0E809F8DF912FCE9
+:10C45000014B1C1EDA84DDEF7F449D0A722FEA4AED
+:10C46000EF3F74EB2358577ACCC2DB771DBAF5FA4D
+:10C47000CDB0A433935B8FDD0EEBEADEA5F837F980
+:10C48000F0BA7F77239EAFD8A0F8CBA16B7DFF8D4C
+:10C49000F598626CEE72928D7F7ADBFD3723BF5E7A
+:10C4A000F4320FF2F3F214CECF4D832C6C81F62DC3
+:10C4B0003DBB28EF191CB451DD9ACCCB9E4CE179E1
+:10C4C000D97F68EB27B8D1AF5D389BBBD8F833CEA6
+:10C4D0000F70601CB5CC46F9D2F1CCD389FB4BBCB4
+:10C4E0009A5ECAED698F83F23C8B19FB0EC67936D2
+:10C4F00070BFB948D445CA3C163BCBFDDB16F845A6
+:10C500007D32BEDCE81FE79BFC5FA9DFCCF916E0BB
+:10C510007F0DEF77CE4E34C4EB468ADBCBEBB360B6
+:10C5200047E0FA9E1379DC4360AF633EF3C760AF28
+:10C53000E3F579B0D7F1FE8B60AFE3B51FEC75BCC6
+:10C54000BE0CF63A5E0F83BD8ED7D7C05EC7EBEB4D
+:10C5500060AFE37BFF0BEC75BCBE01F63ADE7F7685
+:10C560002EDFFF3AA739C29B01DE4E3BFB35F29529
+:10C57000562AF2C2224FB62D693AEDEFAE8F80CB2C
+:10C58000C19E1A504277213DB43417F51B48BCF0C8
+:10C590001FFF17DBDBD2C90F6136DFA12178AFE3C4
+:10C5A0001BE9FE6E68763918E9FB53479947017B12
+:10C5B000E6FCEDCA4C8CA39EB94DE9C3F6C06D0AEA
+:10C5C000D913D351F472A2FB68F1FBBE03B89FB537
+:10C5D0002732C18F4FF6AAC07FE71136E4572DA945
+:10C5E0001EFDD2794ED91E538FCF1B3728C24F1D47
+:10C5F000B74F85356C53E4FBA9BDD8BF43BE2FDAD6
+:10C600008316F9FEBABDE8271F8BCCB7BA564D8505
+:10C6100076867CBEB60EC73F15A9AB9BB712DF1F4F
+:10C62000888C3FBB17DF3F9326C7BFB396DA76D916
+:10C63000FEA795D49EC0FBCF7AE1BA47B16EE56AFA
+:10C640008FD71EE2FB1FEC63AA3E9FB3A9D84AFB1B
+:10C650009EAE1E9CE26E32CF6F49704FBB9278A99E
+:10C660002ECF4FF15298CF8E72F6F5D2A4C9A8778B
+:10C670004FA5F963FA29E5C591FA5663FC5455783C
+:10C68000BDBD8785B03E3E5EDC8FEFE175F48E4C1C
+:10C69000DBB03AFA2B8927CABA07194FAC593D7A51
+:10C6A0003CB1A6D4184F5C259E8F144F5C658A2739
+:10C6B000AED868CA43843E593CB18EF5DBD10F63D6
+:10C6C000AA427254E7E97B7522FAFB677D144F6436
+:10C6D000BED729DE2ACF4FE0FF2DB3F1BC196F9FE3
+:10C6E000BF5BF1A25FD17DB73211AF27EF5626A114
+:10C6F0007C9DBD5BF1A0BC7D589041F8CFFF8DFFC4
+:10C70000751FEEB75E8B9FA323F802A62A82AB9318
+:10C710007CDD30CEA9BB9571F8FECAFBD21DC80FD7
+:10C7200060770A7EB4EE45FEB426288676DE64C9BC
+:10C730008FE147503EE68D176D6DF95E949F5287ED
+:10C740007C7F33B5578414D1FFEB7B51BF1C9B2FEB
+:10C75000FB4FACC3E7B74F91E31D20799C9720DBDB
+:10C76000BB49FEBA22E37DFF11ECFF0BD490D4DE6F
+:10C77000B917E5BDB452E8336D268DDF5927C7FFE1
+:10C780005A2FC6AD6A2DF2FDC524FF4D4CB6C17EB1
+:10C7900087F6AFC4FE70D70F3FAEC5B8D61DF2B94D
+:10C7A000F6F123084F9D68AF2BF897BDF8FCAF7EDC
+:10C7B0007D7FE6F9CCED956C60E1757951B930EF8C
+:10C7C0002B0D45DCDF296C3988EA8BD5B5EEB7A295
+:10C7D0003C46F36A29D541E46F9795EAE7825E7695
+:10C7E00073AC7AFE4B057C9C8D05579A5F8B3DCED2
+:10C7F000DA22BECF75CD6731FDDC83B3E66F2DC87D
+:10C800008FDA0D68223AE05A02570B5C3FCE0A3DA0
+:10C8100088CF91D618879171ED25A29E7853C9775C
+:10C8200082F3F1FC5291DD2FC2E103FA7CAF4D9C03
+:10C8300073AD9DCFEBBC42DD4EF2D7AABB441D8940
+:10C84000D54DF908DBF58EFD943713F9D410D61DBC
+:10C8500067505DD7A8E73B6CA63C6A97586F69F6AE
+:10C86000FB94A76E7A83D70BCB3C76BD80AB09F5E2
+:10C8700032C0DDB85A095BE0BD46543C98D7CD6460
+:10C88000615F7A34AFBCA2CCD6EFC07361E27C06A4
+:10C8900013F670241F5EEDEBC3FA189B1AE757716D
+:10C8A0001ED61FA4BA38CC17A5B348FE59EA91CAC0
+:10C8B000E6EBEEC63CB54E6F519E3A9E0DD31BA4DF
+:10C8C0001722754D228F1EA9CF117A40E6A71BC4EF
+:10C8D000BA9645F4C0E22568E7C63F20F2D422FFAD
+:10C8E0002CF3D495A6736D8D810563289EEBB7F963
+:10C8F000A9AC26D5789E29DE44879B8AF9B94A9946
+:10C90000A73E5A60CC373F6067A477BB328C7CB7B8
+:10C91000A098E743FCC5320E19DF1F87F6377391E5
+:10C920001FD28DF19CB1DC1FA1C35CA6B88E6D43F4
+:10C930002DC51FF1B9027CA864BEF6EFA897B15DC2
+:10C940000CFD6D78BE05E9E1B6903F2AE33F68A68D
+:10C950002CCCA138D079E467DB867A1A479E677FB2
+:10C96000323EB67C5C2C9079D63E3BF6ABF5BE767B
+:10C970001CE7FBCC7120E18745EC181FAF7F995471
+:10C98000E09376899D9FF763F6A559142FF9B800B7
+:10C99000EFCFE8F3211C725FBAA3E839DAC7AE3CE7
+:10C9A0000FCEDF5BFBA3976AB5E491F3183705223E
+:10C9B000790737A6C059B2CC3BA889D88EEA595816
+:10C9C00048A141CFD6B5FC27D0B351BB3FA30E9FA2
+:10C9D0007FD1E0077EBAA590EAA778FCED8B06FF31
+:10C9E0001BF96A3DF2E1B59EE7C5FCE03A9C67ABF6
+:10C9F000A2D6B8E95C0CF32BA3E70BEFC5FEE67CEF
+:10CA0000E1E5E2187F8B5B8C1EB7E82D34E6F53F3D
+:10CA10002F718B7F04DCE13E09F27490E429C0E5BC
+:10CA2000E9AF7DFF83F51EC1F56E55FAC2F1D6ABB5
+:10CA30001F37783A2FF46B94A3E9A9AE06B4676068
+:10CA40001E1FCA5F341E0270171AE2217B5BAE41C3
+:10CA50003C04D6F97BD27F659CAE7F05747314E1EC
+:10CA60007A546E47FC15F26506ADAF8FAFEF2F30ED
+:10CA70007F4E11EE034F717E89E287DB493AFCD489
+:10CA8000B5FC65F07333C17788C3F705A0671DD186
+:10CA9000D3CFE1BD9CFFBDBE80FB17F05E13BD97F9
+:10CAA000C7F9E05E6157835FBEE03A5FD42F4FCE97
+:10CAB000569B8BB89D7B6791A1CE54BDAB6874BF6C
+:10CAC000F99EA2D1FDE6FBF0FD2F8ADFBCBF80DB23
+:10CAD000FBD1BC4DD8C53FBED142F9E57AD1B77B79
+:10CAE00043D5A21BB1AE06F08F6D27AEC7AA5B4F30
+:10CAF0009A8DFBDBA6F36AF27B07725D366BDDD89D
+:10CB00007E5F149F6F8D6975E079A86635A913CF94
+:10CB1000DD2EE8788FEA061DAAD3877EE197BCBE9A
+:10CB20004ECCCB56A97CFD8E160F9DEF93E7DDE42E
+:10CB30003994E6FE1B5F73E0B939F05F5260FC8AFE
+:10CB400032FB69FDBA9DA6732936537BC3AFD3B7B9
+:10CB50001FD6F57FAAC8544F687DAA9CBED3D1A129
+:10CB600078449D2FD565348B313695DCB108E39739
+:10CB700060C7F9100F0B76EE1AC07C9AA3C34AB9AE
+:10CB8000F33FB6F9B61F06918AEBB552BCE1830DAF
+:10CB90000AFFDEC7629EC76F12797C668A33C87847
+:10CBA000B8C463DC83BCFEC35178AA8CCE37D6AD43
+:10CBB00019C8E7BC43F1061B878CC9EF6F540ABE46
+:10CBC000AA0FBCD781EF2DF35A0CF543E678848D7C
+:10CBD00099EBE4791DA74DE5759CB64C5E271FCFF8
+:10CBE00054FA5E47FC962AA267A5CAEB38C14812E0
+:10CBF000DFDDE274A908ACA73A1F731CC159688C29
+:10CC00004398F9D24C8F93267A3C61E3E7933A0735
+:10CC1000AD7E0D6E773EB4BA0BE3E7DA43168A6356
+:10CC20009C95F5210024C6F397B3087EC95EEE6C8F
+:10CC3000E5F502922ECB77F2BA11EA6588DBA732CE
+:10CC4000FD773C968BB8C21DAC8FCE3BAC6443766F
+:10CC5000948355184AB7623CC647D726A66D6184AF
+:10CC6000BF50573ACCF744EB783FC6B5FB27D99372
+:10CC7000DECDE47E442CFB359AAFB5B1777571FEFD
+:10CC8000BFC5B53E695CCBAAD1F952AF233C4DB9C3
+:10CC90007C5CEB88C84BC8B8D6D99DE27B1BE2BC54
+:10CCA000C580BD75F24E37F6F3919E19B377F92220
+:10CCB000E48323BD3FF188F3AF1B278EFE5D88829E
+:10CCC000E218F5A43F2F60345E67FA109DA33E6919
+:10CCD00037D6E5CAEBED0159BF19528B75F631F322
+:10CCE00044EA38E717D346C0CF6BCB38D3BADCD091
+:10CCF0002D787FEE05C10F8B95B002EBAD702BAF99
+:10CD00002ABEE8FCCC5C47FFB77C18C11D87F80140
+:10CD10003C0EC4F1BADA817456F34C0CFADC389745
+:10CD2000EBD181ECD8F493CFC13EB9BF7802F79F25
+:10CD3000C6F0B8C2EF1DA3C715BE551C23AE20E92F
+:10CD40007B709EAA71BAF3B62727D489FDDB4341D5
+:10CD5000AAD739DF63F56D42FCF7B7BE5508ED255C
+:10CD6000DFB27A301F7EADF37C930AD289AF2E9763
+:10CD7000E7FB50E0F764A4AEFB5B944FEF8EF867DF
+:10CD8000DC7EAC1DA76BC3965C3CC8FBBF585CBC8B
+:10CD90000FCFD98F646FDE1758D58BFE9CB437A1A7
+:10CDA000BD12DBF27D9084C9A5A0349B5A643EB1CC
+:10CDB00082F2F5D1F956EC43FBF8ACDD38BEB4573E
+:10CDC000078ACBF7A1BD1A8CCC5FBE0FEDD953A655
+:10CDD000FEF47D4A18EFD7C565D4BF91C9F1CBEAFF
+:10CDE000B17F24AEC8D6933F7ACC21DBF7D4A33DE4
+:10CDF000BE3D9D8F371858DFAB7D0EE1B9D6E37F7E
+:10CE0000D2FE23D9FD27EDBC7E50033BED89742C67
+:10CE1000A3ECB372E1531D78C6AE5855683FFA9340
+:10CE2000888307DD16E1E76CEC45BFA7B644F2E95D
+:10CE3000E354073212DFAD7FFE478F68FA756A3F11
+:10CE4000AA35C0ADB5529D8884FB04F68775D4DE43
+:10CE500073A717E1AC95F10DD6D98BEBEB4C92EFA4
+:10CE6000DDB40FDB23CDBBE6F99DBD88EFDAC83C0E
+:10CE7000DFA6F76BE3E578BDD48EE2F300C54BA2E5
+:10CE800070B518E07A2D70A017E10A7AC25B707F46
+:10CE9000087A19EDC777B46CA2FAEE881C693BD208
+:10CEA0004A510EBD9136C757448EEE2739BADA7013
+:10CEB000C17E9A3E07F7BF4CEE275EFD75C33E89E3
+:10CEC000EBEEE17A48F2519D478E03F8077DD2E4FC
+:10CED00093EDAFD5B7B8AFC6BCDCDF0DFE9E917D3C
+:10CEE0002BE58969AB4DF27365E3B5BBBF4675149D
+:10CEF000CDA0D763D563DF5B10D14FB7123E0BA532
+:10CF0000FFCCA4DD5181F72376872F627754CE8939
+:10CF1000617774629DD52CAAE722BDA9C213AFAE7A
+:10CF20000E68C65C9E076C177592799BD95ABDBF77
+:10CF3000FDFD79DC9F7F6A1E874B7EDFF6CC3A854C
+:10CF4000EAC4DA7BA68CC1F36EA7537DDB51AF0D2B
+:10CF5000A45BE83B0527C5F73507BEE14CBB0FEEE8
+:10CF60001F4F73F9515F1D4FDA49DF513BEDB70A8F
+:10CF7000FE3CF40EEEF3BAB8A2867A45C60DEF9EDB
+:10CF8000B3F55194A3133EDE2E9CF7E377509E59E0
+:10CF9000A6F97C6780EC18C7CDB08DE0BBE2FB9CA6
+:10CFA000C5E279E5B61F7CBB0AC710F68BD49FE6B5
+:10CFB000F39EF863D7DB5F5D566E7F79793F2F1B59
+:10CFC000DA74C982E3F2B66B84EFC2D6C8F3CB261B
+:10CFD0007BAAD2743E9989EFA04A7BBC38B9D18F25
+:10CFE0007E5CF13AA37D74BAEB959E42F46BFD56DC
+:10CFF0000F6E93B7661A9F4B3B6C51D763E48F82D9
+:10D000005D689847D6DFDECAFA3AE85CB8EFF5C348
+:10D01000D68951BFA5DD5349764A7326B4603DC712
+:10D02000FEBE34311FED831E2B7E1196D7DEEBD66C
+:10D0300001FDEC9664DAA7FD8AA2AF0BDAF228CAEA
+:10D0400045B42E88B7A3F1F8BF7FD45047C7BEB60A
+:10D05000CA10E7D46A1FA53A3E1917D3AAE9F919ED
+:10D060009B8883694D8FE27E16899369BFEA35C438
+:10D07000C9B4203D0F46F6BF5DFBB0BDCC23E0D167
+:10D080004EF622BFB5AB5C9FBC34C77D52B37DF278
+:10D09000FE209FFF730EC6B7827CBF333F2F1E0C4E
+:10D0A000B78F11761DD68B9BE57C5C80D7DF95A969
+:10D0B000D91D137C3C7EE504FAA82BAD2B316E10F4
+:10D0C000AD5729A2EFA4358D505FB224C0E5F7E833
+:10D0D0001CB7C12F37D7A934893A9591C6B9B38403
+:10D0E000E7D907144F35D7CB56867AB974D714379A
+:10D0F000E6A664BF9B4BF83EF071967A12D76F8E0E
+:10D10000A79DC5781AC9198F7B2C15BC63DBC9BFD5
+:10D11000572FBF677226C9EDDF0CF797F688784561
+:10D12000F9678B9FBD37C7784E7FA4FA87D212BEAE
+:10D130009F1589F57ED6FA8727E35515F135047DCD
+:10D14000313E38AC1E42D439C83A88B1810C5EB742
+:10D15000C1783D44BBD64AF8BBEAE75CC4FE0F7C0D
+:10D160009A1C403EADE17A44F2D94FE7F838FFFD12
+:10D17000C64FFC27F90EFA4F0AA01EA9E6FD8B7FC9
+:10D18000C3BF7B21ED8B718133BD9BA6921EF2053F
+:10D19000F4FEAF3B722E322310430F1D5DA04E0DE7
+:10D1A000E8FC23783F33901FF3FD2F13BCA6F7B3A1
+:10D1B0006606B3E8FDC8794E7566E06F7510A03D50
+:10D1C000CC75277CBF30D79D487BF0CE92DFAFC4B3
+:10D1D000BA934BF3D5651CCF1CBF11BB7288DB39EA
+:10D1E000517B3287F6C36B602F36133D453DCD35FD
+:10D1F00018FF5EFDF8D27E82FB7FA7BFFF79F3DFC9
+:10D2000000BE6E824FE44D3EC5FBFF40EF8B7CCDF0
+:10D210009F01DE30F191B0FB3F87F87CF6730EDFA3
+:10D22000EB44AFC59CDE657398DCB7FF35361F5CF9
+:10D2300031FFFF6F7A5FE4CD75E3FE5C3FDF48FEB0
+:10D2400039F4FB15E16DF130F93919D0E5E347798F
+:10D25000FF8C7E7EDDFBEFEAF9F32AC8F9053D7D00
+:10D26000AFC13EF2118D3F958FFFBBE2C83A2EE968
+:10D27000EFFF2D4E76593E9F3617F1D5CAF9E90AD0
+:10D28000ECEB9BE6F2FA96108FCF6A927F678AFBEF
+:10D2900043789E74F91C26BE8F12CCC6FB2AE3FE8F
+:10D2A0006DC41FD17AF719FD1118688641CFEFD3ED
+:10D2B000FB1BE5739FD88774B72EE0FDE7BE306E89
+:10D2C00015E2DFDC067B64DE5C635DA68AEDCB8D58
+:10D2D0008BF97F7ACF94FFD73D5F44CFA3F50B64E2
+:10D2E000BF82DDE672028D7F51674D6E8476B5F0A8
+:10D2F000DBC1FE8879AEBB3A1AE7AE9EABABC7186E
+:10D300000C5AE97C60C44E61EE4711FF113B4AFBA9
+:10D31000FE3EE3B98D8314E72A11F46D7EE1D97ADC
+:10D3200001E72AC4374B16EBB87CFF35D4DFCBFBC3
+:10D33000C7787E273D4FE57032F7EB67ADBA7C18B2
+:10D340004A9A05F3BCF82F1FC06FBF7D6E32D82BF1
+:10D350002F77293E2BB41BF74A7E7A81E44157F799
+:10D3600041F2B742F0FBD6170ED7233FAF785FC22A
+:10D37000EBE4EB8FD4311DA6F59F10F188092F4205
+:10D380007FCEBFDF24F87C1CBE6B30FE36A213E3D9
+:10D39000F8A9619A7DE2287516BB04FDE1BD9D04E4
+:10D3A000978BC3551352C85E0FAE06890638EA073D
+:10D3B00059CC38D3EEB90EB98FEDA679DDC28FF511
+:10D3C000C73E2FBB2FCA4FFBA8BF87CFE702FD8FF9
+:10D3D000ED40E8E802FC0E448DF8DE784D998DBEF4
+:10D3E000B750537861A98883507E53E6C14B1F9C88
+:10D3F0004AF9CDF8B238EE2FBA8C7FC722D8E4A410
+:10D40000EFC9C9EFD6CABA8C4A66FCBE5C8CFC96E2
+:10D4100021DE22E32291EFC95953C9BF753C2AFE90
+:10D42000FE93E9FB71F11B18C5B79C1DFC1CB839B4
+:10D430004FD5B0B1F5AD22ACFBB0D9292F6BCE677B
+:10D440009AFF1EC63C1753C7E4503DCA6B73F3A343
+:10D450007528E7F74E71A31C9AFDE7F323F9CF7BFC
+:10D460008DFEF380F49FD5ABE33F9F986BF49F1F35
+:10D47000CF0DFE8AF8CAA6D2FEF67249F1528C236D
+:10D480005C147514A71E4A5E82F128AD879F573839
+:10D490002DF2FC32DF7FAA88B93D78DDE2247C9E44
+:10D4A0005A9314C62D784C47F362FCAEA0F4A31136
+:10D4B000F318FFAA10EB34FBDBF18540CF5924664B
+:10D4C000E4679FF278282F50D125BE2F21EA05A4CA
+:10D4D0009F5D21CEF13795F173D518B1437E90DF72
+:10D4E0000FAC107EB8F4C7FB7FCA147D1DC052E696
+:10D4F00027FEAD06C6C0EB32F13DC51A0FDB8240F8
+:10D50000FD312BC44A102F7B399FB0ED36FA3B57C3
+:10D51000A77A76D1BE3AD2390677893CC7A0517E28
+:10D52000F61AF8F9490497D83FAE60BFB98EFADB16
+:10D53000B81C6FC3F3BFF9D1EF4AC873F3DB93781C
+:10D540001C654609DF6FCC57F9DD884FAA3F407F45
+:10D55000DE5082EF47FDF94C84E70AF4E74C825B2A
+:10D560007CB76232E681F8FAB34B783ED73786272C
+:10D5700071BB1CA3D70114968C92CF6597AF235033
+:10D5800063BDFFA1B0B3D7E5861696F07C3FF1AD41
+:10D5900039DF2FFB1DC3F8548CFD76838853950229
+:10D5A0008B5A72869FE7FF459B7A126DBC636DE5CF
+:10D5B000743D6ED312B17EEB2D719E1F0C2DAA67A8
+:10D5C00092755172DC9ABAD2936775FB59C5C2C77E
+:10D5D000A9CEAC3DF3C0EB0AC0795AD47B0D24FA36
+:10D5E000689FD38EF2EF4B2DABFECAC9B3BAFDC311
+:10D5F0000C2FD6456920EAEB4BF877CB5E2975F600
+:10D60000CFCBC3EF3571395CDD738ACEC3D46F687D
+:10D6100060A12CAA9BB2217DDF9EC3BFBF50516881
+:10D62000659A0EAEE46CF5AE121EF759477C12AD4A
+:10D630000BBC1BDBA576750CFEFD49199F94F98286
+:10D640009B5FFC3F94771B4862347FD0CBC29877B6
+:10D650005FA0AE770C61DEC5EBA3F8C8DA121FCD70
+:10D66000DBD8B59FE0890FBC47F0806DDD8FF58377
+:10D67000667C4BB9E814F8D6AD9BF03D92FC562C75
+:10D68000B425227EDF427A41BF07C53E70C476C111
+:10D69000ED8941F7C87B85A5067C3BBDE506BAB59B
+:10D6A000ABF78EC1F5483A378A67E7BBAC6F221DEE
+:10D6B000DF073A32A263EC3A88A348AF1B806F4C75
+:10D6C000F4AAEFE0DFBDAEEF28A5EFC5D5177EC504
+:10D6D00091427900A50FCF4B36953530B4A71D6A1E
+:10D6E000127DDF4ED26F6919D04F072FC8E3632434
+:10D6F000A7C2EEFC14F1F5FF5EA2B383AF75FC1F69
+:10D70000E6FB51490CBBFCCF957F18FE3D1FBEEFD9
+:10D710009E12FC62BECA7D77C4FA662DB8AAE55394
+:10D72000C021E506E5769382F5938A1DF92C88F2EF
+:10D730008BE7D70A7FBB05F3A1CD5ED6877BE13EA1
+:10D740009423C09BA33CDD81F2D3B8379DF802FD42
+:10D750007FC2A7D8A7DFC47D5AF8FF74BF85F3C581
+:10D760005F3AEF03F0FC1BC15327CE177CCEF25279
+:10D77000C9E541F73CC05B50DD4FFAE5A742DEE06A
+:10D78000278D7FB7E993E5418B555E3726F3A131AD
+:10D79000F29F3EE553E43FCD79D591F2A131F29F5E
+:10D7A000067B7DA4FC2733E549CDF9CF455D5328A1
+:10D7B000FFBC28D342DFA99676BFCC7BBED1F50350
+:10D7C0001B7D176986C292D287E747BF2DF431438C
+:10D7D000AB4EB7FEE369FCFBD7DD292EFABBABF8F5
+:10D7E00083F558129FA01F5C4E98B76321AFCBAC56
+:10D7F0004C7FC68C5787F04BAE08AF32BFEEE85275
+:10D80000C29B9135BC2C52FFE7D0D1D991F91CD1E4
+:10D8100091D9FADDF83DEE46FF78AA2733D3A1B8B7
+:10D820008BFF5DCA62CF6CFABB9492FEC5DEE175D8
+:10D830008336095F8CBAC13F3B3D7D9B5D19A3D008
+:10D8400053E6B147A2E3ACBCE0BDF32644BFDF24FE
+:10D85000EF1F4FE3F83D7323137FFFD4484FC0BF42
+:10D860004AE7FA33D9FECDCA707E2816F598C599D5
+:10D87000DA7AAA838F5FECC5BC5904BFA98708BFB9
+:10D88000EDADBEEDE81F1D2DB353BD4A0C7EA0BF0C
+:10D890006F7B397E1846F79E4F47BFDAA22716A442
+:10D8A000C7E08F4F4DD7CBD0D3617DAAABD0174BFC
+:10D8B0004E5FE92139F55B3D4857494F49DFE1F4B7
+:10D8C000E4FB9DA4F7DBF9EABFE07E18A5B3FA34C8
+:10D8D000D2392ABF9AA19EC5FCDD9B1F8A3A161831
+:10D8E000E7391CE710FA58143F540FE138555F8AA6
+:10D8F000FDF74E9E29E5FE4E1DEB7B7522FA7D67F6
+:10D9000099A8D7F4BFEEC338CD862931EB358F3DCA
+:10D91000A0F0BFD3E365FB2D627FB5E8FCDD535873
+:10D92000B709FEED09ACDB84EB5BF3D2F9F7E5B1A7
+:10D930007E732CD8E3A2BEB30EC7C679C09EC5BC09
+:10D940003CB385189E4B1FC0EFB3CCC2EFB36C2223
+:10D95000BD1BADC3F890F45534EEC9DB9501D97603
+:10D9600087A9EE46E63F993764CC7FCE0C1BF41DA9
+:10D970002B0C19F39FBC4E47EAB7CDEAFC10C6B595
+:10D98000A371C5721AFF649DECBF235C3A4397FFF5
+:10D99000D4AAC2AA5B9FDFBC2DACCF6F82BEA4B657
+:10D9A0008C433FD1FF6008EDFAAC99A10B48377961
+:10D9B0006E1E14908A7F87CEEAF61C403F1CFC0343
+:10D9C000A6E68F6C575FEBEBFF07133449A100808D
+:10D9D000000000001F8B080000000000000BE53C69
+:10D9E0000D705467B5DFDD7BF727C9866C42A04B0D
+:10D9F00009ED4DF879692561F909044AE06E76135D
+:10DA0000B62D9405429B0AC50B64101D5E0DB5280A
+:10DA10003EEBCB42421A420BC1E1F937AFBE2D05B6
+:10DA2000677CD631386AA1485DA0459496A63699A0
+:10DA3000521FD280790CD5AAB496577554DE39E7B7
+:10DA4000FBBEDD7B6F3685023A75DC4EE7E6BBF741
+:10DA50007CE73BE77CE7FF7E9745B315C66631F868
+:10DA6000F99386C6585F2DFC79338E83A651C2D8B0
+:10DA7000D2B1725C9934263236374F8EAB4D633655
+:10DA8000631D1E26E6B30403F8D7989BC69B8D5AE8
+:10DA900033318EB1F02255C0C708FF99E5127E4799
+:10DAA000320CF896B9C438B12469F819FB2893E30D
+:10DAB00005345E9E1EC769FC00E3EBEF4D3D6E260C
+:10DAC00060FE77A6C56F3646C0BD68B71EAFF8C703
+:10DAD000A3FF9C22E9196BE2F30F3BBD20EF9851A5
+:10DAE00085E8B9BCFF01E85D41FAB19FD3FB21A4F1
+:10DAF000EF2192E7D39CBE0F013D6D444F37D09389
+:10DB0000FFB75FEFC52A6327EECFDF808F2768DF7F
+:10DB100027723EAE02FE29E23BC4F7C1F9FCE67073
+:10DB200080317C3E8DE37BDD2DF428D164A2DE9F25
+:10DB3000755BF60DC6B37AE57A1BF4B066A57F0374
+:10DB4000D9C9B2223EFFD7A9CF9A8992CC187E06B6
+:10DB5000EEBB9CFF1B7C6E9BFF199ADFE94EC3D383
+:10DB60007A1EF15C39BC89E8CDF09B20F81E077C59
+:10DB7000A3E0AFE07047326191074B3C4AF249FBAA
+:10DB8000A5C4E3E497FA3C72BC8DEC667B29C73FE1
+:10DB9000EAF0E349A41FE47782E43D8ECBEF9F5D7A
+:10DBA0001EBF3584BE947379483DFCCE34E377A81C
+:10DBB000671F367A61FFD4F0888CFEFF1DD62BA438
+:10DBC000F5843D7DD0F9697B14719FCD4FCB77747F
+:10DBD00018EE8FAAD5E979F5DA7D919BE0CFE5CDF6
+:10DBE0004FAA26E2051856CC58BC9F2537C39A7712
+:10DBF000B0A4CA2086C543260B4CB4D835FB32D11D
+:10DC0000E1F1BBC4F8BFC8FF2D9B23F5FA5412F312
+:10DC10008B0CDDFE95B84F69BAD91336BA671FF67B
+:10DC20003F29F80E852D7672A3F1076B412E967C65
+:10DC3000283D16F259F6E057C7A01C969549BCDF5F
+:10DC400048229ED70B25DE7DB4EEB2F43ACFF171B7
+:10DC5000AE84FF29C167E8EA336D74255EA5BC4B2D
+:10DC6000D2F5CDC37DB45F9E4072CBC869706D5252
+:10DC70004209D88F8FAEDDA49A56BFC0BAF530C422
+:10DC8000B7FB597A4C7A95F103DDB4EE8DA66B7D26
+:10DC900058C847D8699ACE7E164A302B7DFBF9FECC
+:10DCA000DCE0F52D7EE121D4DB1B2FF794FB268BE6
+:10DCB000DCA51D2C0FA4EDDB603E90BB2EF1BC60FB
+:10DCC000AEF55FFFBAA0E78F5BFDC9F5F3D153470F
+:10DCD0007CBCC5F725E37F5E36EDFEE7AAE97B3223
+:10DCE0006C89E71F74FE7F87ED7666F13FDF42BEE9
+:10DCF0005BFD451ED4EF9541662481BECBF89B9B0E
+:10DD0000B98EAA55C83FA5EDB39ACF5FB2833577D8
+:10DD10004F1C0C7F53AD8BE05A9F656BBB015FD8E6
+:10DD200073B1296E814B85F9F3436185AEC0DF2164
+:10DD300092FF464EDF89B04EEB8599C60CB0A9869E
+:10DD400025634A500F5A7FCEF1B160882DCECFE0C7
+:10DD5000BB20F0C9750E2FCA6FB4F2F113B1CE8992
+:10DD600030E703E33FC9F311CE875AB02E88F8D5C8
+:10DD70003C595FFE9AE4DAEE16E3C43B14D7FAD2BC
+:10DD80007EE877A4EF4BBD522FDF23FB97F9FA3BD8
+:10DD9000E13F2513B3917EC65C53ACF37E4B7EF01E
+:10DDA0004AF3FA65BC6813FB9548EFD759A4FB4AC0
+:10DDB000F3D588D24C72F2B19402F143F50776772D
+:10DDC000022B1595C69B38FFA5C9C6AFAE060FC876
+:10DDD000E922EDCBC3F67AC4F2FCDDB0AD1EB8B8D3
+:10DDE0002E8E7860652FECDB6BCBD5E25520B7BF6C
+:10DDF000E2FE54517D10CBA65F7FCDECCB5FC3B666
+:10DE00007C3E925F0576C446B942E3F5C1F3FCB5AA
+:10DE10008AD433B14FDA93C8477BDADEF8787B21B6
+:10DE20007F9E73C4BD52D8535E2DAEF33D215F1665
+:10DE300028C6F5D8C4E329753AC45796FE192E189A
+:10DE4000AFC2BF60FDBEC85937EAC18A0EC5486679
+:10DE5000D1FB4176D221F03F96DEBF51B52308AF0A
+:10DE6000C9A68BF801BFBE8F6F22BC8D4D0AD99F0A
+:10DE7000D35EC6D672F98DAD4DCB692CD16F70BC17
+:10DE8000BE69F1F188174099774A06FF0A4177D8B1
+:10DE90001D3F7413E8417B9BA2A33F5AB9716547AC
+:10DEA000298C99E60E8D87CB049414CC6B0F96F9D0
+:10DEB000D10FBC24D6437C1ED8478C25C122826357
+:10DEC0001A5CA7C7D61FC5E97FA930AB70DDEAF899
+:10DED000CE08B235AB71DF51BCDE036E1AF3944D40
+:10DEE00073BE16AF85FDEB99E90EA1AA4176D63334
+:10DEF0000EE86A107469C6BC37D930A8A23C2C94CD
+:10DF00009A8671DD1FDA0CF71B9A3E3E9F55024C34
+:10DF1000DC3DD0EF43664C76B90CF16A03FDE55C5D
+:10DF20006697C1C72DDAE8CE8C91367CEECB3C5F8C
+:10DF3000722BF74FCB6A419E16BDFB91E0EF474233
+:10DF40009E3B80869E8984209FA1DDB0B52E94DF04
+:10DF50004A81ABA76DC95DB7017D97CA5908C75EF5
+:10DF6000E44FCDF077768CC6F963867FC148585769
+:10DF7000ECEBC916F075FF0268DB804FE047539762
+:10DF800017A42C7A7C7298C94298B79527B630D0DE
+:10DF90009388B9D3DD0F74DCDAF4F65ACCFB5698CB
+:10DFA0005E7D1E9078FFDA401DE6B54B4C2197F957
+:10DFB000EE73C8B70FFE43B978526FBEE04139CF58
+:10DFC00056D828C0BF30CA9F4BB9789976CE2A1749
+:10DFD000CD31DE78BA74FBF316F84FD5E6179FFF04
+:10DFE00008FC31954DBD0C7C82035980F45CEA50ED
+:10DFF000026A2981B918F0E9F1F17DDCDBB1FE2577
+:10E00000B4D315412DE4D2913E46F26B146BBCD7CC
+:10E01000A26F7F1E72D5C8C69D5DA877F7F7AACC00
+:10E020000B70EDCBF72226FCF9109F26F4C295F772
+:10E030009F3D1AC069FFA6325C4FCA11E41D980EBD
+:10E04000F7CFF5C17C00BDBF1AE404EBDE63787541
+:10E050001DE07267BFDD8672CA65CDA9E130BE37AB
+:10E06000E862295F862FE03B21E4E2BAACD05ABADD
+:10E0700026D775D99E935C723F17610C7D77C2E8F5
+:10E080001907708BA4DE76F0FD5C64F0FD90FBCA8E
+:10E09000A25C5FE5BEE43AF4D55BEDCEE867167DA1
+:10E0A00075EE43D2B10F7B356E27677B55CA8FCE95
+:10E0B000EE2ABEA71AE491D8E5223B863A6DBF52FC
+:10E0C000007FA414A681FCEF13F4D20FE0F63617FC
+:10E0D000263B4B33FB715FF9B13F2A958C438DCCC6
+:10E0E000F82386452C8CEF15A3FBBE9228423BFDFE
+:10E0F00028EB76A35D3FC0FADDA8FF1FC352504551
+:10E10000FF18F2E0FD465FC08372DCBBEB483EFACD
+:10E1100091D4CDEEC2F3E5642ACCEA279D5794C48E
+:10E1200079C93700A7A4FFF49941F2CB7EB8929F3A
+:10E1300036188E0BEBA23E334B1C3936D5FC31FA28
+:10E140002339D602CD0CE9D83335FE13EE77F9FC2E
+:10E15000F195C64FD17FEE9F629CC0FBDFC07C0F64
+:10E16000E2C3C5DA47A82EF94B857112EF3BFDD803
+:10E1700039F4637A461F163BF441FAB153E8C7E01D
+:10E18000D162B457901B8B5D9F1F3B2BF5E07676D9
+:10E190003BCA07F8F925F97F0DF801B99CC17D9FAD
+:10E1A000C4B0FB966245C4A61E00FA14411FDE5798
+:10E1B000C0BF2B1B7FFC4765181FCF023845EC2BD7
+:10E1C0009691751837BE1EF2F9C6A2BF304F21DFF7
+:10E1D0004EB9406076535D163C760AF5C695F7C396
+:10E1E0003166963898DED775EEB7D27CA11D4126F0
+:10E1F0008F7C28CC745D467E0240C4A8F7D38B0484
+:10E20000E941FB0285F86B2F658DE8CFDBF0D14C3F
+:10E21000D0F7054A37EAFBB722453C5F1AC7F3C27D
+:10E22000CEC26430C4FB2C04CFCA436C494506EF10
+:10E23000B7222AC14F9A66E461E082BC8FF2259929
+:10E24000AF4AB84084E795C3233CCFA8A88C1751A8
+:10E25000A02B0E91DC218F1A4E637F2AE91A29FA2E
+:10E2600022FCA7BB2C7944DFE824C33C24D7C89EFA
+:10E2700037DC1249C7F55B22C8C72E19D78D5B1151
+:10E28000FFDCE18106F4731EA07B7769265EFF60E8
+:10E29000C1175458967D24524AF45537ED6C1D0928
+:10E2A000FB1D0E8FF563DA94AA4906318FE81C0531
+:10E2B00072C8622F1B233C0E4EBB45C00979C9B8FA
+:10E2C000EF83F4DB0DEB6099EFC23CA084E7010F14
+:10E2D00044CA689ECC07003EE101B8F00493F0B454
+:10E2E0008FCFBEDE03429E99781B2A407FCD5833E4
+:10E2F000C58BB88827AFB51867064029FB5A6274EA
+:10E3000005FFDF130507774A4BE487B2C86F61DD6D
+:10E310001E1FC6EDD6F255BE7ECCFF8C08E16D5CAB
+:10E320001E3E3360F1B79D256C0CE601F736DC79B3
+:10E3300066C0626F3DF99C5E8C33096F06EF52D464
+:10E3400013A0F768D89B9A0B02CD0DB2A457A1ABCE
+:10E350005B473B88E8F43C6EAC6426D6E3D5673572
+:10E36000EA7F15B234FC26D89A483973235DF160F0
+:10E3700092E1BC5C18237C7CF6DB04BFB05A6509D3
+:10E380000B9DE07F56901E38F2A51DA86080B77DDA
+:10E39000A692DC0C781B826B28FE6C9A934BF7617B
+:10E3A000DDA417EEDF33BE89E296CCAFDAA3D1103D
+:10E3B000C5A7EBCCA78E4D8D3F84FAE809A6FDEAF0
+:10E3C000C34467C6AF6E8870BFFA19BC4AFFB1FB81
+:10E3D000E86BE43FA00621397782BCBF9B651F37FD
+:10E3E000093BE82CE47AE87CFE55A1AF7FA988B709
+:10E3F000221D06C4B4E0946BCF37DB65BE29E478F8
+:10E40000BDF201797C2962F1CB208F2F679303FC49
+:10E41000DAD05FA8D25B3CAD68A8FF3962F824333C
+:10E420009338CFC79A0948F5C719C6BBC178520CB3
+:10E43000E72D13FC7D507FFC1D486FB85F339E8E27
+:10E44000505DC8F559FA65B04B1E7FAFD16FF7BA72
+:10E45000C09F023D1D786B66E6F921B1CFCF55997B
+:10E4600087701F2794F856A2FC1F558CA05FC5BE6D
+:10E47000A7D9887E84E9536CF306AFB389F0F4958D
+:10E48000996BD1AE99BEF80AF09BC5BA824F9DF345
+:10E4900001EB7E25776C667C25BE7E10317E86F290
+:10E4A0006A35E3BF40BB7BB9DCA52714BA921D7661
+:10E4B00056E724151807A698AFF37D043F0AA83B3A
+:10E4C000CBDFA1BC68E17C85F2B4853EA8E0B2F860
+:10E4D000C9F322DE2CD4F97376DA085AFB1D855174
+:10E4E00097BDEE059530ACFD8BA86B15F6E5653C48
+:10E4F000C3BE49367BBB28EC49F5BE5D827EF5651F
+:10E500007776BFFD4EC443704A54F42544FC5BEA61
+:10E51000E5F5157B11E8B3C4D7E7AA6AFF8FE2627D
+:10E520008225144B5CEC1B7D91FC1D3DB1DC5F280A
+:10E53000FA4EACD78E47F2591465B675415F5D51FE
+:10E54000DEC750A396E74B55C6FB1E3D7679013DCD
+:10E55000BE28AFBB9B94E959E919C7A667A1E79408
+:10E560009D9EA228DF97E7AA8C22C407F17938D2B2
+:10E57000D1510BFA9745BEFB26D5DE84701A4B7439
+:10E580009495BE6FDE7A0BE291634BDEAA47EDFEF7
+:10E59000B534CAFD6B5994FC4AF6752B85DCAED7B1
+:10E5A0003F5CABDD6F73D8BBBC76F67F2FAF12E854
+:10E5B000F07A139F267B9D7875F6FDB15B7A462332
+:10E5C0009F87847EA26FC77CC3D0793EF26094EBB4
+:10E5D00071784292E09E1D22FF48C38160B02F37C0
+:10E5E000541E32F31AF390CED97D7988A7F5DDDD7C
+:10E5F0007958C73F3B509B350F3954D245743AF395
+:10E60000900343E4216BA23C5F3DFABF1ECA2B6A14
+:10E610002EF0385F73A14BD5413FD745B93F9B39A9
+:10E62000D0A39AA027359887009E03220F41F84D6A
+:10E63000A0BA9177BB54A46BE6851E9A570363CCAE
+:10E6400043660E918700152AEADDFE9ACE5771DFE8
+:10E650009CFCBE58696E885AEAADEAFE1E7A4F22CB
+:10E66000E775966FCE33699FED7A736C2AA73733BF
+:10E670008FEBBB136E28FDAA53FDE5D81FD8CA72D5
+:10E68000432887F7728655B2025ED7605EBC15419B
+:10E6900081EFADA7F39209ACAB7DFCF9677387ED11
+:10E6A000C6ABF43F3E6117EFE5DC92147590510064
+:10E6B000F33FAB1AA9B9100FB68EFB6280F3B39E7D
+:10E6C000EC6883904DED4E8DEAE93B827C1F64FE41
+:10E6D000F5D25285F24340337F01C0CF10F83DD3CD
+:10E6E000787D58AFFA096E5B39CF23EF485CA4FE02
+:10E6F000C5CC7E8FAEC37846FF1A5E2FAA3F3C9EE4
+:10E7000087F9FE4734A6C2FDA56DF156D2CFD31EC0
+:10E71000EA67C8FE42556F37C92D6FC063EB73E4DB
+:10E7200082274B59F2168F63CCD4E505D9FC90BCF7
+:10E730003AFB10FBA2A2FEAC64932E835C2EB14781
+:10E740003A9037EFF8DAA34FB1C1F3657FE1C149E1
+:10E75000C633A81FE3DCFDDF7E06E475E02D0FF570
+:10E760002D0EECDA757725F097E8D2A8AF2BEB19D0
+:10E77000905BD122AC675106D4973EB90AF5F2609E
+:10E78000BE1C834303BA0FA6DFD77F629561199F32
+:10E79000886E398771EFE00809FF269F2FC789FE31
+:10E7A00055785EE3E0283EBE14559F4AD0FEF66BD6
+:10E7B00054476FFCA53F9B7F3C5967D7D77BAAD7AF
+:10E7C000737DBDC23CF0EBAF47B3CCCB59606EABB1
+:10E7D00000791C1C70D1FB21A8B352981F3C38C98A
+:10E7E0007C03E11F3DC5E57AF0AD8702B84FDEE15D
+:10E7F000FD0F67F3F3BF11F1285DE74DE6FE83B12E
+:10E80000010DE3D68E39CF9EA884754ECE1C3F45B0
+:10E81000051640163ECC97E57C6F1DAFE332F4BD84
+:10E82000A2AE42FFF3D6B9866CF65E15357F1FB5F2
+:10E83000C1F3F7A2AD5D1AC9BFE8D8BCDD78EE27F9
+:10E8400055D3D5A3C1FE1EF88D8B619D72A042D415
+:10E85000E143D11502BA8AAE8AAE5D33B2E81BD06D
+:10E86000E5A91B3198AE97EB18C9E7C54AC387CF16
+:10E870009D7432D1C79C25FC7DCE9B5FA4BEE381F5
+:10E880007E17354F2E0DEC5651F564FFBBF354192E
+:10E8900066406CEEFCB32AAA94F9886AB3BB19A748
+:10E8A000726DE3079A87DBC6CBD68ECED821FCBF2C
+:10E8B000383AD636F6066FB78DC36CAA6DDC30FFDA
+:10E8C0000E1BBEBA40C4369E17BCDB067FA7BEC473
+:10E8D00036BEBB7C990D7E4168B5ED794D60E7167B
+:10E8E0006C1FC5274ED68633D2C7C975B00F79BD08
+:10E8F00006E9E3A3A71E0AA05EA46AE26350DFFA5A
+:10E90000F27B4AB07FFD923B7BBDF6489D2AE377C0
+:10E9100009C67B83F17A4DC287CBFA6D7DF9D57537
+:10E920003C3EAFA853B2F6099CF158C66119979DB9
+:10E93000EB3BE3AE33DE2EBC6DB78FF7FB79DC5FCC
+:10E940002AF4A0B5FC677EACD75F6AE07D84CE92E6
+:10E9500038F50DFA447C3EBAF4BE31F85E2DB7DCD2
+:10E960001CEE2DCDC4EB487992FD12FB3C81241B9B
+:10E970005B81CF936C7505F5A5B5C8447E7F82B8E1
+:10E98000BF06AF10A7EB2D7273C6DFB06FF20B0599
+:10E990002C93AF34FCC18816007D7735EDD38AE126
+:10E9A0001AF11FD6AC7EE864CDAF8A8788D39FB4B6
+:10E9B000DBC72B641F070616BF6F1C78A385F7DD26
+:10E9C0007FD0E26329E0EF744B80AE3F6F09D2FD48
+:10E9D000575A74BAB6B794D335D512A2E7AFB65426
+:10E9E000D3F5F91683AEC75A62743DDE1227B89F7D
+:10E9F000B634D2F5C51693EE6F1776FA61A1C72823
+:10EA0000977D85F8519742726DC0A3BAB32E18AAAC
+:10EA1000D5CF835CFF239B5CAF359EA46ABA47A326
+:10EA20009E41BCCA6A4FDD7532AF4FEF37D125F337
+:10EA300061AC5F504F649F0EE8FB26D2E7C5FE5CD9
+:10EA4000D1F5D37750E1741D2CE4FD1BC4B3281F0E
+:10EA5000FDF9D7E2B5E4CF474C267F1E649ADD9FCF
+:10EA6000970EF2E72BC9EED871EC93627F91DE53DB
+:10EA700038FA2005F53ACD937D90397FE07D902BD3
+:10EA8000F10F7C1F47BF25FDF6D5F2EDE4F7D85412
+:10EA9000E365C423E3F3A0F861AEA3F8512D6C96AF
+:10EAA00069EF529E9827F8D9716E7101FA172F12EB
+:10EAB000C8EB748355E33E33791E60F7DA92C17870
+:10EAC000DFA8E9A678BE2D9DE7BC4D79CCE0F865BE
+:10EAD0009703E642D6F80E7278B3AE6AB07ED6A936
+:10EAE0003FECDF0CF1F9603FE37DB269FC7D9D8C6A
+:10EAF00083072FF03EC6254D4932D8BA5AD6DC35A9
+:10EB000003AEFBBFC08AE3F8BE698C2BB41740F399
+:10EB10008E1CD07D0017EE3787E7C0F3EA540ECD88
+:10EB2000AB9D3F3989E386F8DBE49F6A357B9CC463
+:10EB30000C351D77A80956E418DF9C8157717FCBEF
+:10EB40003263C0BB6EAAA9D5035F8B2F36331DF08D
+:10EB50007B4B989BCE870C8EEFEB144B9F4D63A1A4
+:10EB60000EE443FBDC36FE5ECFA16F524EB2DF26D1
+:10EB7000EBF0279911C0F59CF8DBC47B17E7FB96F7
+:10EB8000F72ACC20C22B8163F4BE85AD65FC7C8462
+:10EB90000BEA1394DF304F726FE960BDDB3FE5CEC7
+:10EBA00031F564DF09E5C6D4ED5D0AD5EDA26E62EC
+:10EBB000FAA75CD63A46D64DCEFAE831E167655DF4
+:10EBC000F4989B51BDD5AEE486761393CD93F8FBB4
+:10EBD000B8E61978ADA9977EE90BB63AC91FA83FE8
+:10EBE0003330355B1DC7EB11777ABF4B02E7F33249
+:10EBF000FBEDF798413CDFD83E79DD5756A2BC4685
+:10EC0000F8E8FD26D3E23AFA9BC7F1443FDA7320D5
+:10EC1000C18AA767F65765DA79ECC77640F282EFCA
+:10EC200077E3F53C9F70D2E5BE46BA7023E93DB567
+:10EC3000B4771617EF25791EE913F7DB746EF70C1E
+:10EC4000FD96E53D799BDFF0052CFBF828CAD93B02
+:10EC5000F4BEAAA56D01EC6777F95D64A71DBAB68D
+:10EC6000B514C61D7E8DE729BA2B96ED7D5247BDA2
+:10EC700022F8E67405045D6A7831E53343ADD7299F
+:10EC8000F65D8E73279A06D9951E8A63BDDBEA2F3F
+:10EC900056B0CF299FAFAA57C4BE77911CB68AFC45
+:10ECA00028B7BC3BE5427D19B5662A8ACD07F9CE67
+:10ECB00079B8EF9BD84DF951FB089FED7C96BC3E8F
+:10ECC00026F06D75876254BFE7BB18D6EF5B4BB378
+:10ECD000C7C387C5FEB6EA53E2089F00B98C570642
+:10ECE000C3AD11705BDC5DC100ACBB75FCBD74DEF7
+:10ECF0006BEB1872356CF48F6F7B6A937FB07DC0BD
+:10ED000098F6CF1D60F23DBAEDDC43ABDED0B81211
+:10ED1000D6D55E6121340B6937DB313F81AB7BD4C3
+:10ED2000E246D4DF4BD5B92184AF535F4CA01CDB46
+:10ED3000438CFA165A61930FE97EB444A3730E9282
+:10ED40005EC8BB77A3FFC80FB96CF9794175AEC334
+:10ED50008FDAE981F548EF86DA5F277D94924F7963
+:10ED60001FF842B3319E05DFAB697BB7EB97FB0A17
+:10ED7000FA75257E6C71B22413278F1CFBD7D5F84A
+:10ED8000BEE371C69F3F7F6C0ED5EDCEF18DB2F321
+:10ED900056ADAB11F7A5759C87F4CF397F6B29A7CA
+:10EDA000ABB57E965837A0A0FE6FAF2ECA413FED9F
+:10EDB00047876B91EB0B95E6CFEB2D71B830DA4CB2
+:10EDC00071F8BBF58CE4E8D7E38171A017FE5E15FE
+:10EDD000740AE4EEFAF31FCEEAD72E47D66590DE2A
+:10EDE000FA59E6F76790CB30C6F5C4CF1EEBA1B851
+:10EDF000C436109C94D7F65B4F86526CE875FDD5EF
+:10EE0000F63ED307ED23FDA93EBF98E49CC37250A4
+:10EE1000CE97D8230AC5E1A841761748FB557EFE58
+:10EE2000A4580E811D1C93CA2999FE12C3F71768B6
+:10EE30005F26A33C8520478A57573AED0BCD1B2D03
+:10EE4000D0DC8C076354D47FEE772FB1B7F8FA305B
+:10EE50000DCF9F280917C5CB5B51AF01AE94997FA9
+:10EE60003C9BE55CCE9840D3BED5702D9E27FA62C0
+:10EE7000829F2BC943D2FDB7D25B19E79DFD50D9C4
+:10EE80002F7D06FBA5CA95FBA14CBB48729379ACBC
+:10EE9000B33F0A712D0FE5FEDE048D7592DC791EFD
+:10EEA00090A9D74D9FF51C9D8C97ED81C5B63EFB73
+:10EEB0000CA94B0E3EBF7785B8D8D90B7E13F3E172
+:10EEC000E066EAB3EF3FBDEA38D6E397821E9D596C
+:10EED000FC7F7BBEFD3D80C4FBF979A29F3EAA9ECC
+:10EEE000E17CADC76478FECE130C515C6855B2BFAF
+:10EEF0003F689D27F209679C70BC67F99F1C7FD211
+:10EF000053C6D2F14315FE59C657A641141D699D3B
+:10EF1000CFFDA894C77E9157761EF9049D176041D6
+:10EF20004BFFB62CCBFACEFCCF30F4C0F44C3EAA4B
+:10EF3000F4F33C54AEDF2EEAE7D6D37C3F72C5B97A
+:10EF4000A141FA5A617E7A1EF67FCA5D8E3E95DD3A
+:10EF5000DF38F35AAF8F25722DFE0FF2DA8DF328CA
+:10EF60001FB1E7A5C3638C9FEF293419F6712241C5
+:10EF700053C5BECBF4DE669501DF334EBFFF7E2C5A
+:10EF80009AC7F39CF6F25571AC7F641F79C79CBB9E
+:10EF9000C8BF421CDD3ACF52C7CA730B1FB4AF249F
+:10EFA000F575BAD847896FD0F992D91BF8FB9FD372
+:10EFB0000F9D407DDC0FFA8871BE3D3FB1AD02F37D
+:10EFC000935754B6571FDC8772F225FB49FE18D7BA
+:10EFD000534FB0FDE85C97453EFDCDAA4EF2311887
+:10EFE000BEEFD1C4FB1E67FFC8EB359A317EA76A1E
+:10EFF0008C466BFF58CA6D91D0E7376A9AE97DD489
+:10F000003343BCFF9570F89918D6D3B21F553AC94F
+:10F01000FC3EEEEBF4D87A15DD48757C3D9DA3CC23
+:10F02000FB77467520CB55927B61A923739EA53A49
+:10F03000F1F74146FD320FD689C55817F23A51D63D
+:10F040009FD24FD4A94F7794E1F98C5E8DCEDBE54A
+:10F050001DF9840FF3DE70EF6AAAD50C65691EEE08
+:10F06000A33C7F24E9BCDE3AB30AEB4CCB7B928C09
+:10F07000DF88FD02F5A0B325FE8B28E8C781168343
+:10F08000C6ED2D8D74ADD29206F253554E951B9B55
+:10F090003500CF2D7454F5C46CE31D95E619D4CB1F
+:10F0A000BCF2B8EDBE3708F82C7A0175EE3992EF54
+:10F0B000692E4FCF7C85CE152CEC675BB86DFFD3E6
+:10F0C000F8212D7663FC504EEC7DFD107F5FEAE960
+:10F0D00017EF4B1DF6B6679E4E7690B63B7C6F4A97
+:10F0E000712E41F3E9DDDF4CE067D827B9DFCA9C18
+:10F0F000CFA0EF12C3E27B693D366B0FE6B3EDAFF5
+:10F1000033F99DF01EC3F21CFE6AC2EF440E63B1D8
+:10F110000B79E6E65861137D4F2DBE87893416962C
+:10F12000F4B1CCB945A7BCB6C45CB6733161C6FBBB
+:10F1300062F2F92763A26E03765C96730FB978EEDC
+:10F14000214BFEDE24F0350B397578F8B983B98E82
+:10F15000EF3C66C6785D30D4771E9F1378AEF45DC1
+:10F16000C76201773FAE5745E722C331A4372EBEB1
+:10F17000CF1274CCEA4DB60EC32431C8B2E2B93313
+:10F18000C6CFEFA562FC3CB1276868B82F80EF6E50
+:10F19000C2D7C8CF59CAE7B32EA49F2F243D69E038
+:10F1A000CF675D30A91F24BFAFBBF3F8D83D9BC626
+:10F1B00065CED7B4633FC28FDF99F0734BBB04FDBC
+:10F1C000CEABFCCEE4DE8038A793B8758F81780C87
+:10F1D000FE5D65EDF10903098DD6FF18D127BEABA1
+:10F1E000992CF885FBAB882EC7BF0FF0C0F1E01E4D
+:10F1F000F13DCE1A9AD7CCE9CEFC7B07A13DD6EFE4
+:10F200007B261FAF6C12F0EB087E2D87CFA20F423A
+:10F210001FA7ECC15EEA55E0FB0CD1B79CD3571693
+:10F22000D3F977590EBD05B8CFD3BAE23B9FDEF8CC
+:10F230006A1FFAF3CCF7FBB7D17A5721A736C2631E
+:10F24000CAF59838CFC4ED42EABFD4876F08FDBC39
+:10F250003DA648BD7A8CE86DBA61FC7F89E8717C77
+:10F260005774253E2A2AE34FD0BC60FA5CF1D78957
+:10F27000AEEBA4477E07E6B48BEF0BFE61DDA7691A
+:10F280009D92109D2F8275BF7D23D605BCCF101E89
+:10F290005F1AEFFE58767FF381F0B292E2AB3A1F2D
+:10F2A00022C7FF0F94B0BE363046000000000000B9
+:10F2B00000000000000000001F8B0800000000009C
+:10F2C000000B93E46660F8510FC181486C62F11A3B
+:10F2D0007606866816068699AC0C0C15402CC74934
+:10F2E0009AFEE540FD8B80782E10CF00E2C940DC0D
+:10F2F00007C49D40DC02C49240F34480981F88B943
+:10F30000809815881980F8370703C3370E8439377A
+:10F3100080620F48B41B84AD7810EC3340FF6F045B
+:10F32000E2AB6484C3281E1E389D9F81A15A00C190
+:10F3300017104495CFE047B0B94429B34B1AA81F22
+:10F3400000656D40B4800300000000000000000074
+:10F350001F8B080000000000000BE57D0B7854D5E2
+:10F36000B5F03A8F79666672F2204C4280134830CD
+:10F370006A8A03840882F52420C696DA9152C5FE73
+:10F38000D60E34224A2051B1722BFD726002040164
+:10F390003BBC1414E9E00D8A8A362256ACE83F20C3
+:10F3A000B5B4B56D6CB9D55AED0DB5AD2F0C88520D
+:10F3B000FCFBEBE5EEB51F99734E661250F1B7F703
+:10F3C0000F9FEEECB35F6BAFD75E7BEDB577DCB232
+:10F3D0000FF287029CC49F8B00EE7003C0D8743A72
+:10F3E000EAB66FCC7DA49AFCFE7FDD916D7ABA9E61
+:10F3F00048878244EB01180045001779C9AFA4DEA5
+:10F40000A49F1FFED37985007B41010FF9945227F9
+:10F41000157C8DF4B3F7238860B9FCF3406957007D
+:10F42000DB99B4DD9781B54B95E9A55A156640C6C1
+:10F43000EF8697FE4EFA19BEB999B43FFE6180B6C9
+:10F4400077C22152F84886146F737218F6AB7ED0DB
+:10F4500055C9F3654006070EEF64809A34BCFB5F24
+:10F460007B83C2BB4F25F0EA19C6F712F80BD3F025
+:10F47000EF856FE4421583DFA849C37FBAF0D0F966
+:10F480000F0058DEA23F5DEE0258DD024F97570095
+:10F49000AC6CF1D2FCD2168DE6E32D619A5FAE9290
+:10F4A00026040FCBDB216992F6A16A525FF447FE76
+:10F4B0000B54796D79772169EF4DE7D540D896F7F0
+:10F4C00096EAB63C01E76098CCFB1C3E9FA52D0454
+:10F4D000071E1CDF0BC65958FE6D8A171FC75B3C01
+:10F4E00038E2CA61042F6D2F2A84D2002EDD988164
+:10F4F000F09507DC7A92B0C63981D9536124193767
+:10F50000140320F5E21B00D612B8CF0E4C790B4243
+:10F5100000F793FEDB48FF4AA8ED650F295F51E62F
+:10F52000D615C4CB76F52F5D640C2FF987783B6B2D
+:10F5300023CBA7E745F296799E0D9672D2FE977976
+:10F5400077BE2C1138E2E56EDD23A5C7E9A14B3F5C
+:10F55000FD5724EC7967FFE5BA51877C2AFAAD8024
+:10F56000E8122DF0C5EDF71C82DB82FC74BF629CB3
+:10F570007EFB25E48F92B6151B21992AEB3D4EB9EF
+:10F580001EA9374979F946159265EC7B219187725E
+:10F59000F62B2C2FADF3C7AA7AC303D67186A5E943
+:10F5A00052AEBB67CA842FCACBAF982B11BE8184E1
+:10F5B00085CEC31883A2BCFCB045A3FCB8BAA59203
+:10F5C000A6ED2D5A07959F8F95191D55BDE5F0AFF6
+:10F5D000A8A748BB3B5C40F9D0DC06C96D12F61702
+:10F5E0009D3193E4578D2A1A7DBB8EF91932EA05B5
+:10F5F000C1DFAB249DF2B749F81BF59F533E56BBC4
+:10F600008CAF607F2B46C9D212C47339E3F77257AF
+:10F61000CA3B1CFB4D0C1B65623F91DF7561BDF25F
+:10F620008A11BA42C63DBB9CF1FF2FC7DEE9453DBA
+:10F63000D833FF85451DE56300721D7CA09D221F08
+:10F640006813FBE60331CE672D0F678EBF127DF284
+:10F65000D7AAC8DAB7506FB49733BDE184AB7868E6
+:10F660002A1C0DF4E6B7F272C26748A748DF7CE6B1
+:10F670004C37B424E175C243EB5AC294EFD6B4E8D8
+:10F68000345DC9F9D0853C554CF29C0FA1B09AE687
+:10F69000B3AE57B098AE4703A6272146E05C87FC7F
+:10F6A00079017E5F6A18A5A479A5C8434A26BA7F66
+:10F6B0000D9697D0BC01A5C89FA2FC31D320EDF3D5
+:10F6C00079FD29D263669C20699D8FE5EBA56EC309
+:10F6D0002CB5B65F691813D3F5493E55576EED8FBB
+:10F6E000F45F6585E7395A5FF4D7201D324C925F8D
+:10F6F000E363FDB5492F7F2EFDDF2E25C2B8D0ACC8
+:10F7000070F473BBC89B09C3A84A8F53B6F851C3A2
+:10F71000B496C3A3B6F29AC509D32478BB0BA2C38F
+:10F720002542DFE2A9D13010FAFBA2491397DA345F
+:10F730007C0CDFE9F9DD49E1F597B3F22AE9F746F8
+:10F74000DC429F5AE93726C22FEC1B85F3ABFCF352
+:10F75000D29B5F20FCAAE4BA23D4CE282499F1647A
+:10F76000BCE931D0091C723806A80F94B0FA77AB07
+:10F770001C08FE23708EA3704E8ECEC802A769852A
+:10F7800053C0D11FDC028EEC7CCAC677F253DD6514
+:10F79000E37E3B91B0B8AFD315413BAF00F144F4E9
+:10F7A000007CB4CE7091EF05D308EE754AB71930DE
+:10F7B000BC77BF85534B206959C73F6BBA0EC7FC56
+:10F7C000588AB7EF4863D3F425F999563C8EE3F590
+:10F7D0009CFC27E6E7EE35BFEFDAE6076A221C0D50
+:10F7E000F63FBF35BEC88C68A077BD5F4ACC8EAEF1
+:10F7F0009B32EEEBC0C6030FD15F7938DEE8F478B8
+:10F80000795F21E361676A32E378F993C978DE337F
+:10F81000874FA73C0A787DBDE05D6783F776179137
+:10F82000DB0CF43FD3F09EAAFCF989FEA5F257D970
+:10F83000B7FC7DD6FDE5E1AF849FDE57217511C190
+:10F84000D7828BBD49534AEBB9CF1B5F055844E8BB
+:10F85000B7E0D7630E5D246386F0F597D2E3CF97C8
+:10F86000740A7736FECE361F80A4AD9FFF57F3C9CA
+:10F8700086D733AD874E55BF2EF9839FEEEF969610
+:10F880004312E569E9818BE93E73E90B930602E9CE
+:10F89000C7D5762E18645279DCCE588A7606F63FA4
+:10F8A000F9D4EC8CDB5BA0A395185D4F84A2D42E19
+:10F8B0005A2A016DBF8AD86D4962BF54BFD8EE9DE8
+:10F8C00019A076154D97BA80DA31D52FEED726914B
+:10F8D00029F82BF24721EF2FF589EF07EBD1CE5D09
+:10F8E000594EBE13D6581A64FD91EF51AC9F53C1C7
+:10F8F000BE67832BA792C063C1BBCF9D8C65D28F9F
+:10F900005F96658A9F4DDCEE5A8D761751C83E7F13
+:10F91000228676B5BFC8ADDF27F56E37436676FF22
+:10F92000FA8A9F98E8D25881F61B99FFBECBEF87E1
+:10F93000AE2A5C0713868CED23CC35B0C9B1DE0747
+:10F94000D086A3EB66589A44D64CBF23BF5AD4370F
+:10F95000F55AB4D74295ACBC76C985B5716B399C64
+:10F96000578BEBAE28BF66C9585A5EEC8DBE3C91F2
+:10F970008C5F4CF4679CE0A9584D48CD949E99F952
+:10F9800065FDB5DE194902C3FACBEF2CBB36039EE9
+:10F990000815299D45BEA4C12E5F9B38DE56733CD9
+:10F9A0008651C62D7ACDC7AAF6E835DF594CAFF996
+:10F9B0002B138B11CF250D10413B7B3DC15FCC320A
+:10F9C000BEAFD2AEDF8A55FBBCCED47CEE02E32ABA
+:10F9D0007940F6FE9DF27517C46662FD62BE8EFB2D
+:10F9E0002B9352ACAAFFF93BE79B6DDE5FE5F82451
+:10F9F000E3CCCF34CEE78597E20019A7FAB31FC74F
+:10FA0000DF60D793A78A77686C37705F8DA626EE84
+:10FA10009B7D303992A2FBB9DBA81FEE160E3BC4CA
+:10FA2000366968D7C40132EA33B5DC9DF6A7E1FF39
+:10FA300094AB7333D145A40B5F7D2F6FBFA57E526E
+:10FA40000E16FE3D87FC723E9C7F5249B707EEEFD3
+:10FA500053051C817CDBBC4EB41CCDDB4FF4C61AB5
+:10FA60006D1AD5C7D9C67B90E8D11491AF075ABC9F
+:10FA700034DDD6A2418AC8D9BF1379C3FC56227F90
+:10FA800098FE88EC1731BDB72542CBEF691947F3D3
+:10FA90009B5A0C9ABFABA59EA61B5AA2F4FBBA9622
+:10FAA0001934DF83CF8FC87835946501EDAAB36729
+:10FAB000244DD463B003221504BFCBF1BB05FED5A2
+:10FAC00072EDB332FA3D67F8A87F23C8E7E987A44F
+:10FAD00081FA1B0E2AB00DB2CFEB0E3EAFAF28322B
+:10FAE000F39FAA957470414FB91DA85FA5A89AAC61
+:10FAF0005B44E5E65ED89A8FFC5E54CDBE07038476
+:10FB000091C877A51A52BE101D5AC5F61A6FDF3676
+:10FB10004EA6F5566B2A6DEFE48B73A193AE33605E
+:10FB2000782308A777BCCAEA57B1753278FE3EA49D
+:10FB300020B44D94E9FAB9BA9CC1A168767E09D681
+:10FB4000DC0768EF879561741EAB2F50370D473681
+:10FB500080CE9787937E3690AD0DAE6B0F6CDEA98D
+:10FB6000CDB4D0D9AB30FBFCDCE93BA315088F4A00
+:10FB7000E49A8C5FB8D99FC47587D0434178737C71
+:10FB80006C3EE7E298048EC24590BCAF2C5D1EC867
+:10FB9000E3F3D18C5AEA9710DFB9E23957EF48C93D
+:10FBA000D86E2344EE8374B94FB433ECED7CA29D40
+:10FBB0009942DC42E12A7B3BBF6807B5B6767ED12D
+:10FBC0000ED61A74BC0469A7A7CB15DEAE47EE2B80
+:10FBD00035D92A674A409799DCD8E9948D7F34E07B
+:10FBE00074D8674A27115FD52C2F49DEB69332AE01
+:10FBF000B3763AF951CEAD7A2660C913D245517623
+:10FC000071BFC6E9953433D36B9D1AF94539CEAF30
+:10FC10004AB5CD4FD0699D97D3D1F467A4D33A8D1F
+:10FC2000D33106363A0B7AAD13F46AB4E34FD06B96
+:10FC30005D167AAD13F46ACE4CAF7559E8B54ED067
+:10FC4000ABC1DE4ED0CB490FB1EEA4E9D62C21DDFD
+:10FC5000CE143D9C7AE10559A7DFE5F6A39D680F18
+:10FC6000162D50D93EA9B21350CF43697E3F76ABD3
+:10FC7000C9ED93665A7F2DFE2AFC5F28A76E96BFBA
+:10FC8000267EA816EDF07C4994EFAB457F5812CB49
+:10FC900089FD7573FC382D7F528EC614DA5F1270A1
+:10FCA0003FE2C497279A848D04A40A357A6905FA3D
+:10FCB0002537CB11F4DF0A783C20F004FCFCE6D4B5
+:10FCC000F81F80E10BC13B39FC94E0BC45A1F84C26
+:10FCD000323C39E124FBCB8D645F3384F3F710F3BE
+:10FCE000CCC0090D6CBDE8599FB99DE482CCFD5490
+:10FCF0006E966D7C3362BDDFC637E5ABF26DE5C352
+:10FD00005A4B6C797DD1305BFD210BCEB195973686
+:10FD10008EB69597345C60CB87AFAEB3E57BF10BC5
+:10FD2000CFB72BAF2CB6F18B39A20EF76D496074AB
+:10FD3000D81E1F5187FBB6FECABF7E8B6A7809FEAC
+:10FD4000D542375D870805297E04BE723530DDE86F
+:10FD50001F280C242F21E57ECD30A93F403300F72A
+:10FD600073B216A37957D82E5F5F4301227CFAF550
+:10FD7000AD2A780BFBECDFF824FDF7372F27BF887F
+:10FD8000F55D2964EBEA06B25DC2F33593E8C76D11
+:10FD9000645C97C6D67597E01FC2CFA8573455E26A
+:10FDA000F27B7A72367CA31DDEB2843D3FB4CD6116
+:10FDB000079E227F7F5EF2DB1FFED641C4544E01B8
+:10FDC0007F1155E2E7D5A727FFA58D76FC9434B8BF
+:10FDD0001D72E2D0E79F33FE5AC57A01D13AC44B77
+:10FDE000CE7AE64341BB2B935D21F865C3F49BFCBF
+:10FDF000D6F50CACEBD4B0F43834AF64CA7FD1F88C
+:10FE0000A4AB16ED8B9C8564FE65CC8EC9387F4E05
+:10FE1000EF755365BFD50EFBA2CF3F4DE71F9C5634
+:10FE2000FB700FBCA51ADDAF89BC635FD6BBBDC933
+:10FE3000F44DCC275BF524F9A954ABD135E98F20DB
+:10FE40009F9DF08546422ED91F7A597AA6F76D0FED
+:10FE50004C67FB12F3D59C6405E293C771AC7DF54A
+:10FE60004B4984273955863BF19C79B29CAC20F9EB
+:10FE70005BFDA1FB10AE6F2AB15BD50108EF9024AA
+:10FE80009E1783AAE74D0B5AE6C9ED2231FF6CF6A7
+:10FE9000D192D69BEDEB194CAFB3F2E35DADCB69DC
+:10FEA00039B13B5A554AAF2F8A7D9415CE4DEA178A
+:10FEB000D83E12E703CEF6FF2AF6D101B57189DDEF
+:10FEC0003EDACDE8008C0E2FB4EEAE3B9572611F8A
+:10FED000F9036EBEAF77D82F95C43EC2F3A300B727
+:10FEE0005F2A93D45EF1552699FD5229EC19FB7ACD
+:10FEF00076231AA063D3F6511FFD1B9FA4FFFEE6D5
+:10FF0000956D7DF705847D9460F611C135C69928FD
+:10FF1000446DF846225FD8D7F76A5796F5FD7F8C77
+:10FF20007D94597EFBC3DF3A4830FBA81FFC4DCFC0
+:10FF300086BF7F71FB68BB0AFF9FD947D9F8E47F72
+:10FF4000B67D94A6F36763E738ED1A61479C69FBB9
+:10FF500046D827C48EA1769649EC2CB4734EC89A25
+:10FF6000EF4E32CF5B15DD877EEAB55C5E17AAD116
+:10FF7000352EBA7EEB7968676C447D3E80EB59B4D0
+:10FF800083023C3E4F8DC0B42F61FDD84697E51CDF
+:10FF90004209E8793DE7365F203C103BAF522DB473
+:10FFA000CC9FE345E061972B8FD3BBF9FC289BD70F
+:10FFB000E3140FA04BD4DE52751FA64FF3F58DAEA0
+:10FFC000C7D5567CB0BC52AF27511E48FBA75D0376
+:10FFD0006C78F1D9F042D621361E28CC9E336DF1D3
+:10FFE0006CFE6A4D42BF39C97622FFD2F3721D20E2
+:10FFF0000889FA11A4FF82D8B21B311E33F8EAA592
+:020000022000DC
+:100000006F615C6341D74C1ADFD85A35FA401DA99D
+:10001000971BD12E9FA2E3BA0AD4CFB8023BA3E725
+:10002000A110AF0DF0731C22DFBF597A9CAF9B0665
+:10003000D8ED725957853F69587679213FD2494F9B
+:10004000EFF6D9E4C365956B2A9F379D9A7C4E6580
+:10005000726D927FA82FF21CFDE41A8EF304B0E4B7
+:1000600049F9879C8F8985F2B98CA7C15AAF4EF8A0
+:10007000CD552E6B181F990B5A1EF29F7FB20A297D
+:10008000F4BF141E35D105DB1F5D5AB91F1D25F0C5
+:1000900072CB7E22E866F21A9ED55AB68CF47BBCEF
+:1000A0009AC5DF1768E4BFD1BDE7B392CB574FBE07
+:1000B000EA3E7A6E1A27FC340CF9B84AA6F70856BD
+:1000C00094333D2EEA9DE7966CF7082CFB365DAD28
+:1000D000E1F634C18F522E1B68077C5AFE503E2138
+:1000E0007FE44CB5DB05A74BAF89FC5EC5A9F2C721
+:1000F000A71D4FD0B5B75C2DE6746DF0A2DDBF2C07
+:100100003CADCF73D4DE745D4BE9EA2F072399A190
+:10011000FF5AB794317ED6B93F72DAEBCAC09A194A
+:100120005BFBA25BA1D32E63FDFA162AFA5F51791D
+:10013000A91A5D07BCBCBF15FA5A13D793E36833FD
+:10014000107C28895129D49F500EF41C111906CF18
+:100150004D7DBA41F7E17405AA49C3E72E956DE3D9
+:10016000A9857EBB5D3DC394ACF0FB16BA291C5E2D
+:100170001C0FF5B4C6CE3DD58038F774EC1F1D7644
+:10018000C3F2D2D119E30CD4CF6ABF3ADD0EEF2906
+:10019000B70BA8FADF2D7654F6762AFCDD624FAD58
+:1001A000427EB7D07F990B764B641D8E87AF8098C7
+:1001B0004EF258540CD086E978E4C3D11A5DBFB62C
+:1001C0004BF47C988AB48EFFB173A2ABDC3AED4756
+:1001D000F6C6289E948001B4BE7E6AE7482706B31F
+:1001E000B8A56112D8EA3FEC76D37215A2F43CFDB3
+:1001F000C46B978469BF06F9549386C3D9EF55EE53
+:10020000D8C36E6CA73178B001F5478C637E81B09E
+:1002100097B53B31B3EFB8818D285F6759F23C2E1B
+:100220000BDA4E2DAEEB0419B3B38AF2BF1FF7B54C
+:100230009060F6D0504EB3AD8BF2E9F7ADAD7DCB0B
+:10024000F9DD5CCEB770FBA81DED238BDCB7F3782E
+:10025000B36D12D8EE595478587CD63B5CEEB77A21
+:100260004D1FBDAFF0DC0ADF088C7739A8447C0451
+:100270000FE5D71AF9B13EF05091B0CBDBE9C67764
+:10028000BCEACE1CDF91ADBD88EBF8B478D9C6F7D7
+:1002900031159ED971BA6F495D44E5B398F34DF1BC
+:1002A0001CA076ED5013923AD6FDE82458F983FC51
+:1002B000EC433F454903190BE915930DD41F251B4A
+:1002C000DC4999CABB763BB60F1F5458AC21188144
+:1002D0009935945569FBB0F2422D8ADA706E9FC150
+:1002E0002AFBBD8BD245F6FB52258E7B1261B4EF03
+:1002F00042E877B5D42BFBF4F40879083DCEFDFC39
+:10030000E9D1AE1A7ECDD2BE5C82684786FECA3D78
+:10031000CCEE285FB39EC5813504E07531DF6148BE
+:1003200057231F17832D89FB16E3399BD9C0E26B36
+:100330000635826CE5E3319E1CDA8F0B0CF32C82C0
+:10034000B7A5DFBEA2EB19A4EB44B0E9B10CFA6388
+:100350008C87C88BAB90E98FF6C434967EA4D0F519
+:1003600023BC08924B08889363B1C52EA4FF1CA040
+:1003700071E8E186E6BD185F5DDC08111C86F015AA
+:10038000E5AFF00C481A945FE06098F0C76036154E
+:10039000188C7C81EBCF02465FC117258DF6FB36AA
+:1003A000E1067BBE88DBFD45CEFB5B8E7E8A7576E3
+:1003B0000F4A5F2403DEFB83E9F6FB3661E87AF03F
+:1003C00001846F7F2092427E351DE338FA572176F3
+:1003D0008587E0F389EF4FFDE559A4FE8F16D5150B
+:1003E000205EB67AA3B9F45E515BE6B8B35EFC2A30
+:1003F000EC8E2CF5D37AD4B4C5353BD3651545378F
+:10040000CF2270AC081A40F59A7915D5EF0A97DF1C
+:10041000E78AAFF0623CE9D2C0E85CD4B37B314FED
+:10042000D2A5E111346E57F4A3F0F85D918F737D7E
+:10043000EA1CEF160FD3A37F07E316C4C3284F2C83
+:100440008CF376858B1E9FA9D3F3422399A1DD758A
+:100450001E3FB32F75F59F56FC93055CA372087081
+:100460005AFE85599E581BF2A75947B613C8FFC3B9
+:10047000201947FA3727B8DFBDA7DE6A5ECFA47E12
+:100480004F512F9600EBBE93D45B8BF321F50C5BA1
+:10049000BD68AF7A77F17A601BD7E835EE66011F49
+:1004A00058FB8BF4EA6F2BEF8FDA833DF5F45EFD9A
+:1004B000DDCFFB336CF5B45EF51E16F0D9C605FB37
+:1004C000B83DE5E7B89371AAB7593CFDBE8A2994B7
+:1004D0005FF6574CA99F45C6B9F9172EAE23AEA1BA
+:1004E000EBB6E0ABBDBC5E2BF25515DEC385B64660
+:1004F000BC07CCEF09C703D3BC31CBF71EBE0A4CF7
+:10050000D3327F9F65ABAFB6F9C01843BFD3FAAD06
+:100510001F2BDCEF9D3719FD71CB0B65EE9FFB5B4D
+:10052000DC50891E1BA0DAF26D61563ED2FBB7B8D3
+:1005300089778AF83D18A22B9FAEB2C877CFF89F73
+:1005400017FCFC3C230DFFFB71A3DC0A3FCB0BF82F
+:1005500045DE5BCCCA47B7BD3F092F56897B00C338
+:10056000DB0A5AA9FFE20B3B3FA9D53E3F964FCF8E
+:100570008FE5C5FCAADBA4C9FF5AF3CB6DB5F31F09
+:10058000CBA7E7C7F2627E356DB9A7353F673DBCA3
+:10059000AF847A7E45C5FD615C7756E0424AFA1D1C
+:1005A000D7F6527C31C9DF3E40D8DB3AD5EFA3C045
+:1005B00038C73BB6FF76BFC2E037D2D61B64E7C16F
+:1005C00050E1E6E7C18930FA39DFF0683C8E8EC130
+:1005D000A978EDF9A1981F90CE935FFE89EB308644
+:1005E00029B2FDA443CFF7B3AE2D2D66EBC9B2609F
+:1005F00044B6AE6B220EFAB9013554FFC435A67F5E
+:10060000F60EE0FAA890AC6BCC9F47EBBBB8BE5A95
+:10061000DBC2DE0B48F0FBB0F1C2D1143F09711F01
+:10062000D69C62D36FFB6AA71C40FFD5B183EC9DBB
+:1006300088A7BC6CDD5BDA021DECDD032FBDD7FDA6
+:100640002CE937462AEC21F61EA63F25F61EA6BB4E
+:100650005BC234FD498B4ED39D645C4C1F6D894059
+:100660008C8CBFA3651C4DEFE2FBAB0D682F92F4A1
+:10067000CB8532F55B6C6D2196B20BFDBD5E9ADECB
+:10068000DBA2AD522BD0DF1BA6F963D2B4EBBC7456
+:10069000FFDA15CF25703EF1BB727A4F7C62A14A1A
+:1006A000D75F50534A6E75FABBC0EB31A9AE11DB70
+:1006B0005D1096593D6F321ECA5CEF46AC372EACCA
+:1006C000527820602AA1C28CF5BE87FC5513E0FD4C
+:1006D00069B17830737FB7617FA303BCBF423D1E11
+:1006E000C8DC9F89FD8DD4181E20DCB5242773BD7E
+:1006F000A558AF4AE3F32D4DC93999C7BD1DEBE5A8
+:10070000E727E8FD9D8BAE066A8FBA0AF5ADD46780
+:10071000C1EB25074441267C9E5F9068C67A17C6C8
+:1007200022308C8CAF872220137E7605487915DE27
+:100730002527FD9074C274528EE74258FE254B392E
+:10074000B627E9F819BC7DAEBD5C8CE76A839EFBD9
+:10075000D37869DCD56ACFE7C94C3E1F6ABB6A32E1
+:10076000CA7D1E3F7FFA35E6C9B8AE4520F411AB0D
+:10077000EF67E5CF88FA2156FE1ACFE7E7B379FB9A
+:10078000A67869BCF0BDB78C289E55959EEFE0EF2A
+:10079000559E3DCB32BF7BBF7741F1AC407A3E8363
+:1007A0006F9D78F6AC3EF63D05F572CF9B24A8B759
+:1007B000F21255547F8EF244A97D386A608D81F221
+:1007C000ACAC6270BDEB2D6B5DA252B84C7A4F930E
+:1007D000C375CF3C3B5C83E6DBE1BA67BE1DAE412F
+:1007E0004D7DC3F59497E9B56CF091F10DEBF85B95
+:1007F000FECD3EFE90EFDBC7DFF27DFBF8436EFBE4
+:10080000D4E3A7AC74D97CA37DFCD29BECE36FBE90
+:10081000C93E7EE9CD9F6EFCCFCA1EBFD01BFBA791
+:1008200097DBBB8AD5EE6C8ED9EC5352EF24AF67C1
+:100830002A563B3616B3D9A7A49EEAE3F6AEAD5EC0
+:10084000B4573D9F8FDBBBB6718D5EE386787F2901
+:10085000D9DA5FA4577F05BC9E295BFBD37BF517D4
+:10086000E6E31AB67A5AAF7A83057CB671C13E2E9A
+:10087000F038B05B791C189577527FE1D5649F5DA5
+:1008800086FBD0A884FB7DAD0046EDC7FB26C3D90F
+:10089000BB477953160EC5F55C9AB2F02C5CFFDAB3
+:1008A000F2C0B66F9BE2637E84B13E85A65A0E34D9
+:1008B00053FF9DB7B9F872CBBDD72DBC5E4F79A061
+:1008C000B9F81B96F24B78FB367E6F70B2EFB7D457
+:1008D0001ED10691FA19FC66978AFE783914463AB9
+:1008E0000D02F75D574D1B6BD5CF5B7C2E3A7F6DAC
+:1008F000281FB734335C6D656CDC7B71DC007E17C0
+:10090000F6477331C5B7C652F17D4370B6F457C48C
+:100910006ABB97AEEB6EBEAEE7B99B1F282370C4CF
+:1009200007CB80F7229697F6EDCF696DB19F2FA880
+:100930005AD4C07D5FC91C6D348A47B67677D7CB51
+:10094000F599CE1F1AF87C5AE7D425CAC9F8B0DF4A
+:10095000EEC7250C0ED6FBC857B9630DBE4C7EDC26
+:1009600056AFCDBEC92B9A960B7DCC23DE62F7E342
+:1009700012D56B64A2DB4A1F3F1F39E8B5D95B79FA
+:10098000F932DD771EAF62E7066016533F610F5EF6
+:100990004BEABCD6F15738C6F3C13403D7015CA685
+:1009A000505EDCE5EC5D157F61422BD3D17FD049F1
+:1009B000CF0381DF7713FDB686A7D1FDF8717E0FD7
+:1009C000560D276A99DF91C3A7715DC5C729D9A8BC
+:1009D00042AA808CED8AADF48DB5D2CDA4F74B4EF2
+:1009E000B89297D2F79ECA08FDA5DEF3BFD3C7FC25
+:1009F000C577EBD37E5B9681BEF7A0B3D8D26FC923
+:100A0000876E488DC95E3F5D8FC1D5C3B761C2AFE8
+:100A100028FF3AE75BB7F1235FA6780BA11FF839EF
+:100A2000F8AC71C07FF42BFF44E671FD01177B77B2
+:100A300041DCB7E1A5D773BFE92CEE776D8068087C
+:100A40000BDF05B91EE5EC5DF85D688C85FE4FFB9C
+:100A5000DC0CAE3617F5778973DF6B132E9B3FECFA
+:100A6000BA8DF6FC6C9856847A6BF67A17F5AF5D02
+:100A7000EFF0D33ECCE77B1D342F433B5EDCDB9EA7
+:100A8000A5818AEFF2CC7BF2DE1ABC1FB5CFC7EE90
+:100A9000EFBD4DF846B7C8DB0D81A41BEF01BCBE0E
+:100AA0006BCC151300DB279795A0BECD838CEFBED2
+:100AB0007DB7CD0E5F7FF03BE10558D2271CEA766B
+:100AC00029A37FABD327CE8919BDB2C57988B88B4E
+:100AD000639C8F7AFC307FCEE17E18167FD15FFB5E
+:100AE00013FDB49FE7ED72A3FC34A9CDF5929C3EB3
+:100AF0009FF2B862C620324FD7EEDAD420B0D56B61
+:100B0000EBBBDED12940F5657314F948D49B0FA4E3
+:100B10001ECAE59ECB4D5BBD72526F78F67ADD5CE6
+:100B2000AFFE7CC7BFBBD11FF9EE43872E43B99CF4
+:100B3000FBB4025E326EF78E20A4E83E36E9C6FDB5
+:100B4000DC0DBB948CE7B9346280F43FF7C741BA3F
+:100B50005EDEB0D3939C4ADADFF093D74702C143FD
+:100B6000F792A3CF0FC275F721899DAB9A5D2371D0
+:100B70005DBB4185EF4433F437C0CFF8F0F0533913
+:100B80003390CED2F6BDD7D07E3BAE74792CFA220C
+:100B9000E077897ACC1FF7A044E3A37BC3C7CEC11B
+:100BA0000E3F2831F876BB923E846FFB56778CC09F
+:100BB000D1B4FD3DCA57937EFC4808F1D0B45BB177
+:100BC000F9899BB62B29CF489A1EC214CF57A41A75
+:100BD000C427D38FF377CDA3FEF3F91D2BDF534248
+:100BE000D8DECEDF042F9114E2F525253215F38FE0
+:100BF0003F10D209AADEEEDC1642BC927E67BA73C1
+:100C0000F11CD8EEF7C6FE3FCCEFDD1FC05137F226
+:100C10005753C70A36DEAEAFBD81FAA5C921476F6B
+:100C2000E32FC5BDCF5D2EF43BCEC1B6179C927DA0
+:100C300039F791E35B4C32EEE19DEF6C3109FC8DAD
+:100C4000FFF5FE96DBD00E7AD6A7A11E687AE83FA4
+:100C500042605937AFF43379EC7EF081FBEF26F236
+:100C6000D1FD470F5D3FBA9F7963884EE6DDFDD821
+:100C7000FF29D249FD05CF5C4CFD050B9E9834B091
+:100C8000AFF513F935697D978CDF3FD77793710600
+:100C900092EC1E9E3AE8F3DC2E057C04CE775FF6DC
+:100CA000D07B524DE4DBC2D148AF79542F637E1123
+:100CB000C1F3FC1DCBDF534666C2B73948C64B07AC
+:100CC00040C4308CF4FEC6D72FACC6D445CF579A5B
+:100CD000E028D5ABCE764D07095DCFCB4EC7E3F00C
+:100CE000911BE3569A76AC60E376103A867AD3F19C
+:100CF0005DFC657C6F3A7ECF41C7E3D0F8233C1F93
+:100D0000845D0519CF85C5F9D9BC27BED9A7BD25F6
+:100D1000F4427F789E2331B8EAFCC6323FCAD7CE70
+:100D200087EFBFBB90D1792A414CF723C78700E1F9
+:100D300093375D47AF41FD78F4198F86EBFD0DCFFA
+:100D4000BC44E5ADFB8917DD3AB5BF2120117BA37B
+:100D50001B7A7E3AD1FE982FB14C537B30E509A522
+:100D6000E9353F7979BD1EA2DF0FD1EF492607F3A0
+:100D7000937BA74B19E8F7AC9FDDE786E4008A97E1
+:100D800079ED7F72D373700B5DA57148CF4353F03B
+:100D90007B367A8AF96B38FFF32D746D67F29B4DC1
+:100DA0004EBBB77A548C6B70D2B9DBC5F6094D498E
+:100DB000E9A54C7417EBE0E99EAB3EE5946F3EEF7E
+:100DC000FEE4BBFFF99C1EBEB6FB751BDF08BC1D15
+:100DD000FE28B3DE3FE897381CCDF525C37BAF83F3
+:100DE0002A44CD416569780FD3B7C948FA9042DFEC
+:100DF0003B5DD6F11CD5DF4E3D313F8B9DFD37AEBF
+:100E00009FE6EFDE3B12F5D9E17D4F517E9CBFE3BB
+:100E1000901BF737CF6F7FDCDD5595E67F5C17AC15
+:100E2000EF5B1C7E74EF48AABFB1FF0CF439C6FB20
+:100E30006FDA63EFBF69C77BB6FEE79A1D6EEA5FA4
+:100E4000ED679CB755E34A9CEFDB9D2EC07793DEA0
+:100E5000EE50EA33D9412FF175B127AE2658F3325F
+:100E6000FA27957CB78EFAAF75B1F112BE9B68BEBA
+:100E7000E862EF56AAC6CB1E229FF13CB78EFBDE7E
+:100E8000D6E015A05BF478C2814FAD50ABC5FD80B4
+:100E900036395A6DDD7F09F8F30CD906FF8260FD03
+:100EA000407CEF0AF7713ABE53A14698FF3A34A549
+:100EB0009EDE7BD464CD9771DD66FDA1DF0EF9DF88
+:100EC000A5C9A05BF86BD4A42BCE45979D0ABA6D3B
+:100ED0003FB066323B0F16F35F33183603D1C36B56
+:100EE000A4A307F09D08F352166728EC3BE0FBFE35
+:100EF00010EEFBCB7ADB7B60183AEA23AA8E7436BD
+:100F0000BE61B9E79C8EE3055D56309E39423701DC
+:100F10002AC468108617E36C87E3BEAB83A601A2E0
+:100F2000DE309D98338CF1371CA5F9B5F57FA171A2
+:100F30008F8539D1513903309F2FB179A4E83E4FC5
+:100F40005CE397734A8BFBD20730593D6CF52779E8
+:100F50006033DDCFA03BF364411A2F22DE4EF4BB99
+:100F6000C63751C2F508E73908DF69C3478E2CEF51
+:100F70007088F8C90122EF18076B6A357C09A6A2B0
+:100F800019935CC3F17C3F21E1FC4AA083A6A5D064
+:100F900049D37CAF26A914BE57A9BF4B86BFC0C991
+:100FA0001C077CA760C73BEDEF5B15FD9518A1639F
+:100FB0009CEF73EECBB3C7237D3B87E9991B73642A
+:100FC00011FF1CB3EEDBE2D04871E02B64CF93F548
+:100FD000C8414EECDA1C0B9F29814E165FE6D82FD4
+:100FE0005FAC2CA2E7FBCBC37DC7752DC5F8F0B372
+:100FF000B297270678676E050A3FF383495E16E7C6
+:101000006D80AE59F91163796AAC719386ED3D1D1F
+:1010100017F2A182783669EA43B922690EF215A166
+:10102000C34ACE8741E8E29D1CA5FE8F2DEE581CD9
+:10103000F97060794C62C1445189F9D50CC5CA0771
+:1010400072CED5C57DC56DC174C22796B899FB38DF
+:101050005D541554FF68846733A7BF933FED71B0AB
+:10106000C2AE0BF09C87C7E3FDACFA77F4FD17B571
+:101070003040E35F02D5AD37E2FBAD2A346BA857B1
+:101080000322BE25C2E216C5BEDA57698F17F538AE
+:10109000E2635D7CFFDE2B5E9CAFC777E0870C765A
+:1010A000B3733D7E3827739C138CCB1C9728ECB40C
+:1010B0004FCAFF62FFD9E8ED7C9E02A11934AE53FE
+:1010C000E57E8BDAE91AF5B71FD921B1F7361CFC9A
+:1010D000746467EE48D49728CFF87E790EFF2EED22
+:1010E000D8BB17EDABD6101879F954FFE90AC1FF48
+:1010F0003269945722E9BC5DEFFDE669F4E3EF51F4
+:1011000000DF753B42E6D889F3548D3C245A0EAC7F
+:10111000B2D1F993CEABF7392693BF9B34217F012F
+:10112000DAEED80E89BDF303E7DE85EF5D351D707D
+:101130004192941F03D6EFB1CDCC6EB8EE178FD786
+:101140001049808D1C1E5CBFACEB4C41BD1F740B65
+:101150009F84C5BA601A9DF8DE7303C7CF8068BE4E
+:10116000AD9E98DF3BB3EA0F50FF4F8CBDFF3C7044
+:101170004689AD7FE0FE119DFC43BEECE5679063C0
+:101180006EA0EB4A343745ED20B29FC6FD47528A28
+:1011900020DC4E7FCAFCDD125DCFAE27EB19BEC747
+:1011A000767DD2B11F75C45309FC3BF9560E703BD6
+:1011B0003200812C788EA4AAE9F92C95BB9B7EA1E4
+:1011C000507BECA647A4248DA7EE3A2B1728DE15FA
+:1011D000EA977A039AEF242B4C9ABF1DF8F384ED1B
+:1011E00078F7E976BCE754DAF11B8CD8F1E8C473E0
+:1011F000EEB861B6FA73954637653E8EEF4AF20F48
+:10120000F14DF4249DC77C328F94DE1B9F73F6ACA6
+:101210005986FE927EF1E8C0DF390EFC1D873D7BCA
+:10122000592944BD4596F84F3545E5CA2987024FEF
+:10123000A55A672DFD1609523F7598772235B0766D
+:1012400025DE0E2654A323540E459C724ECFBAFAC7
+:101250003A9C24E9CD97EF3F340BB2CB5D478B37F7
+:10126000D2E0C2F371883454E079B946D3CD58FF47
+:10127000BCBED65B838EE7828886E91DFCDCE44831
+:10128000157B17A923F54111DA7F778C3E7A19DA9D
+:10129000FD4DD74294BECB1464EBEF2E9E4E0EB2A2
+:1012A00038EBDBA33218E82FD8A32425F44369C612
+:1012B0002F2E42BB6D8F4BA7EB9F76F437FF8B969B
+:1012C0008FD1F01CA3584E8CC271497DEAEF3FB21A
+:1012D000E7F5D0772DF651F7EE7567E3FAB4498656
+:1012E0003999F6010D01367E77E55F8A902DE77911
+:1012F0008FD27DF9F22EBB9FCDBD8BF9E1E6EFBE1B
+:101300009CDAA3FB67B3F7389F38CCEEA54E51AEFD
+:10131000FEEA97487EFC7FF0778CC0983AB38885C8
+:1013200072203DE33E826782C7F53C7EB3E9AF326F
+:101330008DDF1C7F214828AFE3FF08111351DB3CF0
+:101340009BAE574F87A61CC074F21E89FA8F9A0E67
+:10135000B3F56D6CA7DD4F74FE64A21748FF357BB3
+:10136000987FABA68B9D0F9CFFB2BDDEF82E7B7ED7
+:10137000423FFCBB24C0D7AD10149D4E7CEE1E979F
+:10138000B122C0CED3E8BDB2889A79FFD515647674
+:1013900018C1079DFF91A3105942E671A4A1A4169C
+:1013A000EF291DF9809D371CF948A9CFB4BFDA1287
+:1013B00060FCB2C9CDCE8F37CD0E24179379EC9B4C
+:1013C0007DC350DC57FDE3DF6243B5BEEC12A222C1
+:1013D00064BA261AB9300EE5A395DD77834471A669
+:1013E000F793855C083911F2513CDB1FCBE4171DE4
+:1013F0001664FBBFBAD99512C66F773F2BD133A6BF
+:10140000EE2504AE3EF068C29241084FD3EEF7A934
+:101410009FC2BB27B3BFFBD94088CEBF7B89B978B9
+:1014200002C1D7F788709B280FEE4459A6FE4D588D
+:101430004FFD57DB028C9FBBBD6C1F0E6AA218DFED
+:101440008DE8DE3DE9D26504CEBB89FCE1FABDC979
+:1014500015A1709BF380BEFF07FC7E61E965B0F5C6
+:1014600076CB7EED40A0F620D2FB6080C51F15C470
+:101470002212C21DF9F84408FB3FF2A187D2AF84C3
+:10148000FB8B44BB23017E0E17347E43F9654E214E
+:10149000558A915828D23006E0BCDD04DF16FD9D48
+:1014A000A69B49C7C98F01BD479F1F90D97918D9FD
+:1014B000A7E1FEA309C48F49F72B42FEF0D29B6A35
+:1014C00089BB97F648A920D19FD5DE400AFD32F9A5
+:1014D00073647C8387D8A35ED65FA7DD6E450D8CD1
+:1014E000FA177500D03CDB1F097D2CF4786B1ED3F6
+:1014F0007FAD6B54AA1F37AB5D3EF44B97197A9DB5
+:101500004AC6CD57751A6F31780E93F79CE1F7E60E
+:10151000F5D84513001EFB58C9E81F392B28F015D4
+:10152000FB07E26BE481A3FBD0BC8AF8A000E93D95
+:1015300085DB3DE3DF65FA48DC3368EAB94760D70D
+:10154000479B7CDC8E81C4EFF1DCFEA9BFAAF4FED0
+:10155000408FFE993D85AEA7A0543D87FC35E157ED
+:101560007C7BC0F50FD9ED51BC9CFF422C8E7038AE
+:10157000F5CD38207A49EA5FEF38E94C8CF09E7C53
+:101580002941CA980344CE2CED9D7A6A6090AFB38E
+:101590005C4F1D8789032FD6D3FC347A61E4398FE1
+:1015A000857F849E4AF35392E2D5398E04DE9EBC39
+:1015B000361CF5CB0B0AFA518ED4B2BFF393E2720C
+:1015C00094F741F252E487F57B2EF121DFEF3C30B6
+:1015D000C98B62755398DD3B53F74E3781B38FF556
+:1015E0005CD9055E3D5089F890291E148DE42DE3E9
+:1015F0001F4B48FCDEA59E3B3DC3FBD822BD29CC3A
+:10160000EE95ED3C302C97ED475394EE3D7CCFFDAD
+:1016100017422E04BF3BF95BC8439CB4922D7684DD
+:101620002275F0FDA3DD8F10E776445CBC3F6316A6
+:1016300053FB7001B70FE381112BF1CF1CB4A6EA65
+:10164000343CF758101C46E3AB170C60F873E243C8
+:10165000A44D1F127BD11207DFA41EA5FEB1A60F59
+:10166000DDB6EF02BFD9F022F07B01E257FAE4F8D1
+:101670003D3FC8E8ECC4F3A79D7FE94DE332DEE7C8
+:10168000FB5799FF04883DDD45FDB1EC3E89E0370D
+:10169000A13F6A6E6E8BE7E8697D21EE8308BD236A
+:1016A000F4CBF98D89E77232E80FA7DE88B8B4EF82
+:1016B000AE22F88BFC2C40DFEB70EA910FF09762C2
+:1016C000EA77BB2748E07DECF9B765F49B3CF15322
+:1016D0003277521ED93B99F9053B4FEDBC4BD8AD43
+:1016E000C25E75D613F6AA5877C479D3AF83B18793
+:1016F000707C693791A710C6C7B27DF28140EC11AA
+:10170000FC9E4360F6632C6065AA8CED67EDF29A4F
+:101710004D3E731CF2D79152D93B3201F62E9413F1
+:101720000E317E4390BF2B40B80EED9AD21A6083E3
+:10173000CD67EF06948E8418AECF78BD14E7F92BF1
+:101740006E97BDC0D71B911E0844F723FC2E154C85
+:10175000CFE84F0EB7F02FFE3A68ECC3FEBCF5069B
+:101760009DC7200D2268EF0F523BA4088123BF5173
+:10177000977A9C3D625D27FD0D9AAAD7A21C0DC2E7
+:101780003B05581FEDA30CF4F97390C535CDF376E6
+:101790003D8F267CD3D4E6FA501FE7EBE9F7102201
+:1017A000DCCF658F0339F2CC4B83F1FCF3B51FBC62
+:1017B0001FC473ADFF548F0611CE3717FD3E88F757
+:1017C000215E5BC4F61FD738EC9CE31C7FD343D16A
+:1017D000C341927EA7E5E31ADB3B240BD9F9CCF594
+:1017E000490537A53DFC3E777B0EF5ED89FCBC8EA7
+:1017F000025B5EF0E93C0F8BDB72CEBF2AC4E2686D
+:10180000AEDFB1D53D48C7F163FF85E3BFC9EDB891
+:10181000377705A9FF43C0336BC72837E2E13FF7AD
+:1018200078F8B97FA78BE1DF988AE773314E0A27F2
+:101830009CCF3F9B43FBBB768342ED8E9964AC8586
+:1018400084BF637BAEA7FB70E73CAE7D4D9F3290BB
+:10185000D0EFDA1512B557B1FE22C20FB185CBE930
+:10186000399E739E334D47FC08B72B9C7126D7EDEC
+:1018700061E7EF0DA0AF9C589621EE64CFA5F4DC94
+:10188000EDBA7EF63D65216E4FD4C0F918377F1C46
+:10189000AA7E58A5F7BFEF79B3056810D9DB2D5E96
+:1018A0009A1E6ED158CAF5E7DCDD7B9FA77CA67631
+:1018B000D6A0DCEF3CF07ACEB7F4B41EFFF2D6F738
+:1018C0009FBB87E4C700F3F3087FFBD51CEF1771BC
+:1018D0007D7E1DB717C67CD8B73EBF1AF131B2372F
+:1018E000BC428F5F8D7F6FD08207A1D79DF838767D
+:1018F00060780EF2C7E490F3BCF9D3E1255BBB79C5
+:101900004AE67846214787838CAF1BDA2F5F564221
+:10191000C68F3FF3C6902EA6270EA29E107C0AD03B
+:10192000EC463976F2A3E0931EBEDBB39AE249F0AF
+:101930000791AB303FE70CE3FED0C97FFDC537759B
+:10194000BBBA86A05E70F259B7E35EB448AF083107
+:10195000FF7B836E4CC1FD2A596E96B1F340A68F72
+:10196000DE5413CFDF86F2DACEE465DE938FFC041B
+:10197000F5D00D3FDE10423DF4969A28C2F11AB719
+:101980002D0DE1B9FA9BAA19C2F66F25958CF18F3E
+:101990003B4292784FC31627016DE66528C7FFD8F2
+:1019A000E6D2F01CAC69BB879DBBEF6278237976E9
+:1019B000DEBE2B739CC40D0F6C28D259DCAD3D5E8E
+:1019C000A2DD45FD17E85FC361B29D17F79C3F7725
+:1019D000F47D9EDEB48BC7D9ECBA3463BC84884BEB
+:1019E00070F2F16607FF12FC50BF9F49E0A2EE764D
+:1019F0007E4E1E7FF0AE9187087C87DB7F1592AA12
+:101A0000ACFE78761E7FACE3BB3FF2CAD9F9B79B38
+:101A1000F37BDA9E48668C9F6874A542B8AF6ADC97
+:101A2000EAA2FBC0C64714FA5E1DFCD143D7F3B946
+:101A30008FFCEC0F1710F8E63EE62A9CCAA641E39D
+:101A40002404BD7AE258387D6E78FC67EC7C59E757
+:101A5000F12C9C4E731FDBEBC6B81C273E2775ECA0
+:101A6000757739E22028BD3A0E4DA1F7091F3CE1F8
+:101A7000C675F6AD67251858D6BBFD9CAD3F0BA1CA
+:101A8000BE403CD138004EB7EC714BA9CB7E5A4DCD
+:101A9000EB51BF5D7F745C84B23896F2FBA33F25A7
+:101AA00070CC79C543E3A7E63C7A338D337A436D36
+:101AB000667C7FEFD2225C7FE7B8CC228DA6ECFB60
+:101AC0009C2DB7507EBCEEC55B8AF87DA462E6EF24
+:101AD000318B719ED76EFE269DE76C88517E9C737C
+:101AE000AF12453FCB7115EA1FCB2037237299DC2B
+:101AF000BC719F071FD38137B89FD3FC9DC2FF5E87
+:101B0000A4F3BC8ABD1B739CEFBFFF19EA396FF4C5
+:101B10005AF7634DEDCB3B914E6F0F36066A349EFC
+:101B2000403539DEE8FBEBCA8B170FE4FA8DBE7740
+:101B300023ECA049F81DEB77BAE8BB379676B67769
+:101B40006B16F0F109DC7EE93C921665F6837E3374
+:101B5000571271F02CFE46F059363DD0CEE2593E78
+:101B600038C8F40CC6E5D0F24E576AA02D1EC763E4
+:101B70007B17251D67E2E2726E2F2770D278991EBF
+:101B8000FC3E2B25F11D64C12FB3D77BECF1793DD1
+:101B9000FCE37CB7C71E3F739DC32E1369AFF53FAF
+:101BA000D7715EB7F9D4E2671A5D491AFFD4F847D6
+:101BB0000FDD9F343EE28A225EDED9F1DC1FBE4596
+:101BC000F8FE9D0E21C776BDEB94E3393BC7422654
+:101BD000397E2710818C724CBE6794E340FA5C43D7
+:101BE0008733AF77AFCBA277BFEAC027B11B723183
+:101BF0008EF8ED87E60EA5FE0A077E85BE75EAD152
+:101C0000D7433AC573EF783FB6EEA7E331191E0507
+:101C10007FDEF0F03C3A4E0F1F0B3E157C9C256E8C
+:101C2000CC894F67792EFACEC6F6F68B9875508917
+:101C30007FA729EE06F6DE9BEC8F20FFF677DEF914
+:101C4000DBDC32F1FEDB796C5FC8CE3B23010DFF9C
+:101C50006205DE9753329DB34726C919EDFF1FE495
+:101C6000323B09DDB2983E99CBF0D7AA44B923AFF5
+:101C700083DE63A067AB08675E88CA998BC7A990AB
+:101C80009EE97DF4488EFCBE4EFAB8FB87FB2F51CF
+:101C9000D13F3B46BE7938C9EFFCE1CB97A884DE43
+:101CA0009109F2E3C3487ED70FFFC8CACF93C7B8E4
+:101CB00008AB6E375FB96432C9CFE7F39E2FFC24BF
+:101CC000AD636D7E12553E74279EE7A83F657F8FFA
+:101CD0006825917BEFE8F439738E074C1FC9E7B88C
+:101CE000494AF2CBCA7EBF0C3791BFF2C736E652E3
+:101CF0007CD5E988E7C39A97C6EF2C78EA621A4741
+:101D0000FA642EF3479FFBF804FA771DCF201C0FCF
+:101D1000E60EC80E47AB8BF57378E7B99310CFE7A3
+:101D20000E459F5A9A1EA3559D7EF711B49BCCEE8B
+:101D30000FE3FD96789E9BF6F324E7B3534D45DC05
+:101D40008B92C3F842C9959B1F23E9B39C1FFE7772
+:101D5000AE26D621BAEF3EF2CCC0FBD8BB314787C6
+:101D600020BD15E5D89FD1DE3CFAED1CFA774B5E1D
+:101D7000F133BCBDE26778BB327795EB1CF27DB4E2
+:101D800077C8CDC8F4AF483B6EC174AB16FB25A332
+:101D900007A4B0DF6F5DA3B07E03CD417C374E3228
+:101DA000981D2E1166BA9AE0236E80EE1E8E226C6C
+:101DB0008FFF5094D1475374FCA06D7C2825EB26EF
+:101DC00091F32BC7337A11DCD275F4A5712C2FE077
+:101DD0009B911C16EFD2293C7F4278467992837101
+:101DE0003FF52D625631BEB7EFEBBBFDEC7CB31B6C
+:101DF000DB8F4CC70F34FD4DA6FBD9269C03C93F92
+:101E00007E18F8DF2B64EFEB08BFC7F85FDF44FDF7
+:101E1000DFD5BBE7B23813EEEF12E7F935FBD9F99E
+:101E20009CD3BF350156517D3ADEA14727ECFE2AEF
+:101E3000D5AFFD9DCFFD43E8D5122839CDF3B98F3D
+:101E4000734FE17CEEBF013359118B00800000001D
+:101E50001F8B080000000000000BB55A0974545590
+:101E60009AFE5FBDDA92AA54AA2A450804E34B02FF
+:101E700024210B45122004D42220D0314A8016811F
+:101E8000F64881B298AD98B4DB699D438520D2DADB
+:101E9000A319756CCE69BAE785D61125E92924D135
+:101EA000E05432C52204254E9045A01D3BED74231D
+:101EB000DA64313D824BF761FEFFDEFBA82541E984
+:101EC0003E67C8E1DCBAEFDD77DF7FBFFFFBB77BA2
+:101ED000DFBA4409600CD03F1D2403D49BF1970264
+:101EE000307C3C2311F200F47A00D9096054642854
+:101EF000C1F62AFDBB0DA06D338E3385FB6F252AFD
+:101F00006C9EFC53F6FBC1462DAC86828879ED7C35
+:101F1000DEDB652B4031CE7F1154533AC0B4BEECAA
+:101F20009FCFC1BEA1DB002ABD979EA0FB6775AA0B
+:101F30001F459B71ECD74521BCB435CE560053F1FB
+:101F400095293A50CC6C5EB88AFFE3947850B2C3BE
+:101F50007D4BB633AA2FC7DB764122FEF07B7A5346
+:101F6000508E227E0B12DCE3A3E679DBB6A89BE45D
+:101F70002EB2AFAF20B9134B32A2E681E3FA4FFA8B
+:101F8000B09F8D7F573300A643656208E52F844AD2
+:101F90008F84F2BA3F027708E59F718A8FD39E73D0
+:101FA00087FCB217712CF928FA7A2944F4719EC77C
+:101FB0003EFAC27138429EE9F604D7050BFE180FAF
+:101FC000E3AFCAA3E2E80E114EA76437AA01EA8F75
+:101FD000E12017B69F810A88DB3428480486AB0CC1
+:101FE0002AF6DF04EF0B73B0BDB279C871785218CE
+:101FF0004F87271ACFA445D1788EA98CC673EC8A57
+:1020000068DCC679A3714ADD3825EAFE4D9B0AA338
+:10201000FA373F561A353EDD5F16D5CFDC5E1E35EA
+:102020007E52D3D2A87ED68E5551E373D4B551F7E4
+:10203000737757DD90FEF303F551E362F53FB5E3A7
+:102040002751F396CAF7CA9011E6811FFF880785CA
+:10205000A462D23FEA210423F53FD3E527C6FFCD92
+:10206000FA7F98F49F1BA17FF9DE44AF356C6FB106
+:10207000ADA6D79FD05AC7905E714E14EE0AE919EB
+:10208000AF0D1AACDB256C1DC89D7BF1FA63667E33
+:10209000FD5181CF95B83495D6EF081EFD5AC21672
+:1020A000D5C2ECD0FFB1456D44DE3C2A2B0DC4AB4C
+:1020B00017E54A09509E54549D2E1379A4838D012F
+:1020C000E4F7B33ADDEACA08F99EB373BFF29C5D48
+:1020D000C7DA5F18D156F1BDA916F09B0BD973B4BE
+:1020E00036FAE7015CB72D8981822F2CDF3E7F0E07
+:1020F000DE77F4652B0E0033F56F01381FCFE53D19
+:102100001FCFE55C65521AFBC87FC8EA2492A7D9A5
+:10211000EEDD69C7F79C979E30E09BC1E0F21BC8DB
+:10212000EE52CDE0B7E1FB1A0DB0BA12FB0E7049CA
+:10213000F5D826C24E3BE18B622857911487AA72CC
+:1021400013FBF0FAFB24D138B231B70E6600ACD4E1
+:10215000FCE1C61CE60F87718DBDA450BD9208D866
+:102160000E3F90C9AE9FBB0FAD10EDE99C91E3A16E
+:10217000E17051F8C9CF379B597B69B33DCA6F6E87
+:102180006C7E2141C179CE65C3A240047E5D84DFAF
+:10219000746A6586DF80FAC764826770DDB7934929
+:1021A000689FD4BBCD8A439EDAF10F95807A30B612
+:1021B0002DF1A34E60A55161E3B5797CC1B94038DA
+:1021C0001063E9FA3D1FC22692EF9E6FB18D785FD2
+:1021D0008FDDC0DED743EFC376393676C46D39EA7A
+:1021E000C541EDD1390BC82EF07A48C2FEE26E30FF
+:1021F000903D2CF1A61B489E93E03EDD8EF29CB5EF
+:102200002BECF91F42A581E43A735F6D028DBB365A
+:102210009F360F0AEBC078F2A1C36F4846BF3574F2
+:102220008BE4DEA5B0F799E97AE5BDA94F5A95F0A0
+:10223000FBCE80B7FF34EA7B29B8D9BCDAFC6879D9
+:10224000517EF18D8DD5BF4BCA207FA80333F9C3D2
+:102250004E13F3878355575A5FC2FBAB53FB6E3265
+:10226000E273E7ABBE9D4CB8ACDC218382FAFF245D
+:10227000C1FB07FBF4301EE71EF87302DD5F6552F9
+:102280005F7909ED00F698DCAF003DB7873DA78D7B
+:102290001BB0CFFD8C78072508D4ACEBDBA786FFFD
+:1022A000BCD773C612CF347E3D28F855FF5AD65896
+:1022B000E2537DC2357EF1FE2B9963895F3324CED4
+:1022C000CBD879BB905F4A16AE1B79A520AFBABEBA
+:1022D0002A4B223FB1EFB8B388E4D483F76AE4BA5B
+:1022E000F6BDBF2A97EEC359D70DC94BB6E947399A
+:1022F000EF012E678FB08F15C1A422D23BDA9DC5A6
+:1023000081E356FDC76BFDBF257C3AF7BCF2388DE3
+:1023100029BE313C34FFB4379EC7231071CE2D70D7
+:10232000C13897AD47510721DE4DF9C2F5FCD65EA5
+:10233000F20BC8AB2B3A747C99E4AF2A81FC82057E
+:10234000DC0AB5E865DE9B8D7A6C3CA083A7B16B97
+:1023500023A7A6F99F12ECCB3AEE7FB06F4EC1389F
+:1023600022FCD324C7BF2EDACAECC7635D3383B91E
+:10237000442657F1E1AA0A7A2FF4A21F47592BF1FC
+:102380008FE2C16CD874280EE59CB103F3031C37AF
+:10239000F32CBFAFF9F55921DD1A63228DFBD91754
+:1023A000B28D208A8E03B30F977F4AF3CE8688E7DB
+:1023B00046890FB31C7F5F7C98EFE0FE2190CDFD36
+:1023C0007B2014AFFAD3D9B44595F9C817278F1FCE
+:1023D0002D8839D9B1511AC836A31F5EE468DEBE14
+:1023E0007D02D26122C785FA8DF45B29623CBE96DC
+:1023F000371E9EC2FC21FC05A522BCEC42E61879E2
+:102400008AD1EE78307647E59DA123DFD8FA701D9A
+:10241000AD4EE5BF485F4398D7905F88D3F7191D4D
+:10242000A3ACEF4DF2AFC8FFE71C3A26AFB943F2B9
+:10243000A8F87EB3E20109D71067B74F93A5F0F86B
+:1024400032078F4BB547CEA719515FFDBAE3B63CB3
+:102450009CBFA6FD0D1B2E1F7E6CF3AE73E03CD51A
+:10246000E73E9841A10B199E569940386524923D4C
+:10247000E5EBC1AF2F1C29876F072E06295FB72315
+:1024800089B5391D125B9F2FC4D739D0D1E88CF4A0
+:102490001BD79EFBCFCEF1A4B73D636005F9E3FCEB
+:1024A00060D106E231C962405DBCFE552E9BEF094A
+:1024B000473ACFAFF5A0A7EB00AA6E290EDA63C0AA
+:1024C000E770DE81AF64364E9B37BF63AE6C471E4C
+:1024D000E5859A0E525E18173429A4E7B89781E370
+:1024E000128C637ED1D7B510287F1D74805BC2FB30
+:1024F000ADF1431F132F863A4DCA2E89F06B022788
+:10250000CEDF6AE4F133070DE10D6BF8BAF6BEB821
+:10251000E0CF81FC15F2C3A3D27D7D13DC628DC4B4
+:102520003D81C9FF4B07E7576B7C486725BF8F9CF0
+:10253000DCC5E40ACB09ECBD9A9C39AC0E68350EBB
+:102540005D78DCC5E4B2131F7280CB09C12CE515A0
+:102550007ADEEE61EB88B32B6EBF34522E5F01E65C
+:10256000C56877CF6E816B764E76EF8B0FF7CD68AF
+:1025700013AD1920FCC229968784FBE8B04AC2CF6C
+:10258000BFF1CF67B66F9DC3EA23BF8C7CB0609B61
+:10259000E0A47572FBC2B2C933A690E3E0469C2C5E
+:1025A000667EFFDA78E4BB95FA563ECE9D68B79416
+:1025B0004BCC6E80ECA64EF89987A4D085DB50B545
+:1025C0005F860E1628284BCDD1B7196FAB75C19712
+:1025D000F2F17E59BC3748FEF7AD8F7460C3F57FCA
+:1025E000FE5A9C5A817864EF6F4EF65847CEF7D466
+:1025F000D92DCFA792BEF74B0A228D79E1501AC987
+:102600005717FCD4E8C17661C7EF8D149F5639BDCA
+:1026100047C80E4A3A1AE6117EB3A0A9D16E657E6C
+:10262000D14B3C0DA470FF317C6AF2AE8608BC2F02
+:102630003978DE0243DE9BC96E82C23EBB28FFC1F1
+:10264000B65DE461ED0756662AF9E1E7FC703015E6
+:1026500070CE2D70389570D6AE0FAAFA45C4A7DC9F
+:1026600033E6D59E08BE5D10F67E41BCEF1F9DDEB1
+:102670008F0887EA039F186DB82EDF1F0269149F29
+:102680000298A7D9BFC32FFA62ECC6A71F32D2782F
+:10269000DF45607E04F5BA3511F5B4E74CC79435D3
+:1026A00056263F24E2BADBCF9998DF6C4FE7F6D786
+:1026B00070FA7201F9ADCB9DD537135EEF3B0C1A62
+:1026C000CFCBE2C99EF602F3639A3DE6913DA2E8C4
+:1026D00079C4F362EAE7B0F95A8DBDE5CCFEDA754C
+:1026E00040F6873C67BC479EDB29FFC8B323EFD980
+:1026F000F359CC9E5B7B31E061DF8F7E7C12EB97E0
+:102700002DA37E6BEF7C3BB3671D425B4876193A85
+:10271000C8E609604C23D549501999A796396C4CE5
+:102720005ECD3F563AB8FF0F642B896E5C8F45969D
+:10273000A3EC20225EF2BE88A72B9F37FCF4C509CC
+:10274000644D222E88BCAC4BE4C1E02D62FEFEC776
+:102750002296D5BF53BAB805D75BDF2373FF2F7816
+:102760007250E4C98737A7B03EC50B05F5341D5B31
+:102770000FFAD3199E4DF3D0C6A06451D3216A4BF2
+:102780002B03F3107198B3A2F790819B732EF1AFD6
+:10279000EDE00F72F5C4F77326884311DBBE19FA1A
+:1027A000F875C4E1912EC47F94B884CB61FC4304D6
+:1027B000181FAFC79B41A9EFAED96E4CF99F1FFB05
+:1027C000037D1CDA0F1103F1C87B7ECC4FFD28502E
+:1027D000BBD333D58938FE36C93BD589380E9EF830
+:1027E00026997C7AFBA94F6CE4EFDB8C9E5CE25966
+:1027F0005B06D60BA3F0738293F3A7D8149DA76B47
+:10280000ED5227E7FF643F3C43FCA96B93ED2AEAB6
+:10281000BBBF4DF618318FBAE0F126EB11D28BE039
+:102820005F3E9BE2BBA87FD771D8611DE52F18677B
+:10283000D6BF6888AA4B6BC4BE4616F46D4B459C48
+:102840007C2F4BACAEDD18938FD450FE5240F54533
+:10285000B391D653F572CC3C94C714D0B8EFAE7395
+:10286000973AC53E472664521E833C62F5F4D06910
+:10287000D9BD8B62A01EBA4DC8DF3D3A8E13FA4D0A
+:10288000668F5A3E637279E691DDCFD3E28AA85B08
+:10289000875A2595D9CF6EF4F3D82FBDA83403C736
+:1028A000E154CA0C5A0FE765A99E8F2F0DA633FB82
+:1028B0002BF1603D8FEB5E8FF5BC4AEBD6F23CD539
+:1028C000C0D68FE197E579B3406DB4E1B80DBB2573
+:1028D000B6EF53BDDB1095E7F9043E353B4E1CA126
+:1028E00072B23610735FE0E38BC1E70DFA316B24EF
+:1028F0004E8F3A45BE97066991F91E743B47AD0B62
+:10290000347CB43CFB4F069E5F7C20E6D7C6FD8B33
+:1029100093D7E7751E60FB4735AAACAA3C1FB4AE3F
+:1029200041BEDC2FF872BFE08B0FF8B8DADD921AE7
+:10293000A278F533AE7733FE112EEB026B16A42A84
+:1029400023795525F0D8D86260F92FC02623D9E71E
+:10295000C69D31E3042E5531B8D479A518F9783ED7
+:10296000FEB7CA576DE0FB35D5C82FBFF2FF276F02
+:10297000ACFEFE5DD3DF149812A5BF454937A4BF56
+:10298000D83C79EF9129167A7EB83B83ED4368BC39
+:10299000899D6781C8B317EEE0F9687FC73C4B3E5D
+:1029A000D553C7F56E09E729EAF95F5B3EE251D8D6
+:1029B0002943054E31182C7AC68FEBDCD73D71992F
+:1029C00082F1A1B047CFE24B514FA14A754D614F03
+:1029D000A1253381194F12D50B380F8BCF83C72711
+:1029E0009ECC233FDB3DBF98606F385E68A13C62A0
+:1029F0001FF07D0DA9A738A92F22DE743BF9BEC6B2
+:102A0000B694FF7996F2FC857B0D6ECA47161A863E
+:102A1000DE9FEDA2F7EBDD0DD8AFE959BB258EF4B3
+:102A2000FE9AE4A674FC486FBDEB47A4DFA0C16E1C
+:102A300062F23E7C90EEFB5B24F7241CEFEBBC3D86
+:102A4000B715FB85CD456E82597B5FA14379A18285
+:102A5000F2C5711656C72FBCC9C0E2EEA5F1965F4C
+:102A600053BE54E5695E40FEF8D2DBFB8CE40F06F2
+:102A70005B2548C1851C4939F41B3FAEF3D29B2727
+:102A80008C9494CF6B3B61ECFB8E7CA25F9521C450
+:102A9000EAF72623D541B5CD5ABFCF487AAA14F913
+:102AA00055DDCBBF67FD2AAA13F07D553B6555C1A7
+:102AB0009F873ADF3212DE752D128C4D8FB8FFB230
+:102AC000C4EE6BBC5F0B9C076B857FAA16FB90D591
+:102AD000B40F89D7613BF7371AEF1FD8BDE40885DB
+:102AE000EF754DD17EE841C1F30D5497B2FADB6B1F
+:102AF00024BD6ED811334EF0FCC1EFE1B93549F871
+:102B0000F31CC8219E5F9ECBE3C9E513F1963C5CA4
+:102B1000D7E563B21BE03BF9CEE2EF71912F0C8752
+:102B2000742C9E69E3063AFECCE28DEFF8B091F288
+:102B3000DB05C12F983E2A8207E613DE7782B7862F
+:102B4000F0BB3368B193FD57F4717F501E34A9B4C4
+:102B50000F7E2704B6929E07BB5EDDEA24DEFC1BD7
+:102B6000E70D087FB741E0BA41E0BA011D7E12BA15
+:102B7000D8AABC032F61BA0FE5C0FD507940F8A177
+:102B80009DD13863E4B98FF4551734C1D378FF0E63
+:102B9000E18FEE68E1FE28364ED6897D80C171B99D
+:102BA0008BD97E2BD6BB94C7D5B444E35F27F605FB
+:102BB000EA62E2F0CD497CDFEEFBEAFF583DCD8DC5
+:102BC000D153C510E74F39C53D5C7F77684B1EED8B
+:102BD000DB6978C5EAA95BC94C1CAD9ED5DAF7451F
+:102BE000DEAFF517237129DF0CD89BAC9175FCABD8
+:102BF000493CFE54CD92FDA4E76BF5CEC443058A53
+:102C00002E5CEF609DB332690CAF7BA6E1D4472701
+:102C1000C8E07285EB9DA7525EA828A47CA585FB21
+:102C20009181129C2F91F27960FECBD76252A94E0E
+:102C3000F1217F589D43BCC1B63228DD4EBCC1FA9C
+:102C4000611DCDBF84B68E1187251D3CEF5932FF23
+:102C50000BC6B76313F97A87F5CAD8D1EA09AD8EE6
+:102C6000A8FB8AE7A9DAF53AB47B1A5F1794585D96
+:102C7000DC76F0EBB474F49F839D57D2D660FBA250
+:102C800058BF96A70E619E9A21F214CA9FD77395DA
+:102C9000C1064C871F431EAE17710EA4ADCC4EEA81
+:102CA00028D925BEB54B7C1F673F5E9889FEF78308
+:102CB0007896C70C9CE1E743F4FC1398470DAC0DE4
+:102CC0001C76E2F8CBAD128B7FEB31C7BDB570A49B
+:102CD000BDD70A5E36C01651976D656D79F6DE4F29
+:102CE0001E277FD46256C8BF0E74341AD9FEB21A9A
+:102CF000F17CC6C87CA856F0B7F67BF6B55E4D12DF
+:102D00007152F012D7C1F2DBC163B2DD2431FC7E17
+:102D1000353E122791FFB41D8C637A1E3C61552904
+:102D2000CFFF5CF0EF92D8776F2891192EBA59BC7B
+:102D3000CDED7A2B83F44A7AF0D23E4AD75B533CEE
+:102D40006C9F4F65F654BD5BA6C3BEB0FC010BDBA8
+:102D50000BD5FA1ABE3E812FCA35D9E80ACBD5AEBB
+:102D6000EFB3B947B11B493AC8F4A693A2EB5CDFB5
+:102D70007EB9528DB0275CCF6AF26FFB053F403FB2
+:102D8000944C7EB9334961F23504B99E759DBCC53A
+:102D9000F72FE7FB3606F6FE11F7CBFC3574FF7212
+:102DA000BA05184FBEF25750FF910C99F9A9473E4A
+:102DB000A8CA8288F783C4EB719F612899D5C3277D
+:102DC000744C3EDF89E1E48956F283CDF3ED79E47A
+:102DD000DFB87F389261D948FCF6D37BC786E759C4
+:102DE00098C4E33CD07A53289B7991CF2BD6BB056E
+:102DF00096321CB6089E75897C14EBA633648FB19D
+:102E000075D3F5F2DD88FA8D3D7F79AE72F247C851
+:102E100083C2637A3FD5EBFBCE723FD1D0B9E17765
+:102E20005407FBCE9B80FCC4235D1BB2280E83D7C6
+:102E30003B95F2BBCB5D0F4E65FB97D21626979F55
+:102E4000E44BA1BCE97432E543B59DA793595C6F8F
+:102E50009FFE02E5499817DD41D7315F61FC2BECFD
+:102E60002966FCDB77BC3829930407B785E6AD3DBE
+:102E7000A6AF247C6A8F15BF5741F94B4F19CB93EE
+:102E8000B4BCA888EA71CA938E4D8CCA93FA057EA9
+:102E90008307E2D8FE8704199C3F30318A3F356DA5
+:102EA000EFB07CA2A643F644F2E8DA732E3DE38D40
+:102EB000C1A5B0F91A029287F1632F6F6B3AF6B190
+:102EC000F5551B024CDF0D2D067EBF95B7004DEC6E
+:102ED000793F38FD84C77B7409F5506E5427D0FEC6
+:102EE000FABBE9BCBE88D5C77617DF4F78F79CF7E9
+:102EF00066E2CBBB73BD59F651E2861FCA78DD2D61
+:102F000009BCDB0C2CAF8C1DB7CDC5F77B6C491011
+:102F100075DEA8B5F52ECE9F7223DFA78ABD7FABE5
+:102F20008BD7CDF8EF191DF2E26485C1FEB4A82756
+:102F3000C6A1BFBD4BF8DB65771A58DE71529C33D2
+:102F4000DDA5F9DD121EBFB5FDFE253BE1492CFFD5
+:102F5000E14BC863E7604B3CD17EEF6E915F2D5B28
+:102F600014735DE453777F4F3E35C325FCE16498CD
+:102F7000CCEB06AB85F645BFEC36D86526B73AB143
+:102F8000327FE43A357F73449C0F75A31FA4B621AA
+:102F9000E743B64FF5EE8173BF71303F1A07197CD6
+:102FA000DF91EDD7D75E67BFBEE19A9DFE308A778D
+:102FB0009A9EFA29CFCF1BA9A7A502EF5AF3252382
+:102FC0003BB7844DDB7572F89CD264F07A52711D68
+:102FD000868EB9213ABF6CC831B17CA9FF764925EC
+:102FE0007F8F72A69922FC7DFF389E7F3DB25C6286
+:102FF000FBC207723E6471BC36D46B245E4D6E5BBF
+:10300000F324B35F3F9CA27A49D3E762338F9FD703
+:10301000F4A8AD976E2AB43EA79FFB65176B693C79
+:10302000C5CBBB447C5C5C12ADBF2CE85D40FB2390
+:10303000F77824962F5D4FEF4B574C7B87DCDF8D65
+:10304000EAFF9F5CDE875D64EFBDC3CB697FF7DD80
+:103050009C4FD328BED65D87CF7E81AFCFC2CFC570
+:103060007C167E1EE6CE521AFB101FBDC3BBD9458F
+:10307000FB4FBABFD8A600CDD3F7AB7A89F4030CC7
+:10308000FFEBD9D13631EF36979DDB8B8B9F0FC588
+:10309000519FECD9A04E203F01793776CED7B0FFB3
+:1030A0006801E969E0C0B10263843E2FD5A33FA067
+:1030B000F8D2792859B146F24D27F8A667AD242DEC
+:1030C0001571339A7F97887FA4FFBD87EEA2BAB0AF
+:1030D000BF6D994B5222E26AFB49DBA48879FB83DE
+:1030E000321B8FF5D8E4BB1322E57C92C9D91FE0CF
+:1030F000F301F44D5E961F79BF919F1B99FB188FCA
+:103100009FCADEC4CEDD351EEB81F3B8AE6309B0D5
+:103110003825D61D30E20FAA33BA4C2A9D53D07EF3
+:10312000BB23C24E8E0A9C67627140FC9C057E994F
+:10313000E69D8933DE4B7D3D84E84C6E3684647EAB
+:10314000DE3D0188D73304AF67EA4307A402368E19
+:103150009D4B95422F1B772B0CB1D603763DB56561
+:10316000E0666D89397407B993BC40807D97144A35
+:10317000D63B2E98D951298CA6BFF0FAF57041E3C1
+:10318000290EC6A487EDE3C78E1B1676EFA6DA825A
+:10319000F4DC0F6C1FEE16E893E925B3F5B088BE9A
+:1031A00027BB450FE6789477EF611DB3E7AE3E4548
+:1031B000257FE64E12CF7D86CF617FA687DB2D85EA
+:1031C00020FA6E455B6F2C0EA5381FED0BCED46335
+:1031D000E5CB700CB1F7DD4682E3BAE782A2A7FE29
+:1031E0001F5DE9623F85D769F3449DA633FB191E35
+:1031F0007F12F191CE736C384F69930467E97C2696
+:1032000093AF579BBF14B3C1C4421ACFE31B6D8564
+:103210009F75F2731E1B3B9F9B6F27BCA450B2EEA1
+:10322000AAE5C6711D4C0626B7EDFEA181C78BC36A
+:10323000E75DEEE0D1B3F45D8EE4F1B0EF7ADC66E9
+:103240006B88F27364C7A5C8BCFBAA6BED5FC9DECF
+:1032500025C5CEF0022F28947F8C0D7FEF02579367
+:10326000C2DFD3108C1793C3E7FBDAF735BBD5A5C4
+:103270008A0EF5B2C26576935E0ACD6945540F3663
+:10328000DBBD7F75B1EF6C5A26B1C9F4EAF4CA848C
+:1032900030DF2DE02921BCB5737D49E8EF7AE7F6F0
+:1032A00064ABC4730BBA7DFA2EE819B417B373B4C8
+:1032B000EF8FF8793E5AA142DF1DC113F314FA2EA5
+:1032C000609BC3EC7E5AA2141FD76709AFAFD1CC65
+:1032D000BF276834F3EF0260EB74B67FF690388F47
+:1032E00068B4EAB2A9DE6A84783795F49ABC0F25EF
+:1032F000703E3EF4DF16763E1A2BF7D7F1DE9C3196
+:10330000D3C3F23F2ABBCF62EE1385E71C0D4F5D9E
+:1033100018CF156A46639FC2F09B46CF4F33A9373B
+:10332000D1BEC82A13FF7E49C30D15CA486D17FACE
+:10333000D0F0B393BE691D1ED4B7C6978C307ECF34
+:10334000C473DC0CF4E544267B56217F1D8BCBFF38
+:1033500001AF6B7F8EF0290000000000000000002C
+:103360001F8B080000000000000BFBCACFC0F0A3B9
+:103370001E8143D1F8E8389D0F534C941182D7B386
+:10338000E0D78B0D5B3122D8FEDC0C0CCA9C0C0CF8
+:103390002A40DC07C4FD40FC1E880DB818180C81BB
+:1033A000380DC84E07627B2076E386E86966676061
+:1033B000E806E2C9403C9B9D74FBCD251918CECA96
+:1033C00022F8B2720C0C510AA49B338A87267633FA
+:1033D00042E5C76BA3F2BB7419184E23A949D02646
+:1033E000CD7C466306062663DCF271E6A8FC504BF2
+:1033F00054FE5D3354FE4577080D00AEA32483B818
+:1034000003000000000000001F8B08000000000007
+:10341000000BC57D0D7C54C5B5F8DCBB77EF6EF6AF
+:103420002B9B0FC20642721302040CB8C480C14A1F
+:10343000BB89A0A0C85B502B585F5D02242004828A
+:103440005A492BFE73212104126041D4A0881B3EEF
+:10345000142BD8A0A0B6B576F9D0529FCF4645A57B
+:10346000ADA50115D4024DB5C8F63D7DFCE79C998C
+:103470009BBDF76637E0EBFBBF7FFAABC3DC993B44
+:1034800077E67C9F33676665318564E6117211FECD
+:10349000BE47C8040B21644CBC244155206309F984
+:1034A000919DE09FD6CF5C36D61312B511129B4B7F
+:1034B00048A78B76946AEDA49896B7DE28922C42A2
+:1034C00052E17D859026A1F6C8E05242D44122D92E
+:1034D000491FADCA999E1A72251F77371FF7B97A0F
+:1034E0003B961DF55E2C9FAFF761B9AF5E21D161B0
+:1034F00084BC585F84E5CBF57E7CFE8BFA322C5F72
+:10350000A90F60F96AFD242CA3F5412C0FD6CFC07A
+:10351000F2707D08DF7BBD7E1E9647EA6BF1F91BDA
+:10352000F57558BE59AFE2F3B7EA9BB1ECAC0F6347
+:10353000F94E7D1B9647EB23D8EFFDFA5D581EAB85
+:10354000EFC0E77FA87F19CB0FEBA358DE4ED20860
+:10355000E947C86DB79DB7CFA2EB1DF6C47DEF4C10
+:10356000CE2464FD18D10FE01AF6C4C7BE50717C9A
+:10357000DDEBBFB1CCE8480097EF1301C759EF2648
+:10358000D8BEFEC0EF893292907563BA7C2AAD4FE7
+:10359000E6DF19BEF3A87D5671BC9F799C4F8885E4
+:1035A0008D63A5EDB4DFD0CDACBFD63E19BE3326BA
+:1035B000DEFE54DB3BF6D92E7D3B7BFFE92DEFD8B9
+:1035C000017F6B63128922DE554268E950BADBFA4B
+:1035D000513CA71CB3115B3EC5BFD241BAE838EBE2
+:1035E000C63D12154B61DDB49B02EB7C9708140EAF
+:1035F000AA9B203D2830C6D5F1EF5C4D449CC7B056
+:10360000278EB2EFDC7A1ECB57FF211342DF5B77A8
+:103610009B1071D2F1D78DFFC217007A539FB10072
+:10362000BD21B92AF09F2E5F908EBD7EFCFB3E959A
+:10363000C269ED37EFCE980DF4379AF8E17B6B0F46
+:10364000FC9C28D03EB21BE1D7C0D7BD76E6AC3C8F
+:103650006F7172BAA49444C432BA5C17094412C0A0
+:10366000F75F0108143E166F04D7E4A0FD12E1E1F4
+:103670005F898CFDD6BA83EF015CD4DBACFE9D7410
+:10368000DED7F9A3E4942B3E6FA87F44EBAEBF478F
+:1036900089C50DF3FECC67A1EB7796C957A5D0D9A4
+:1036A000B8BABB8FC1FBAE6BAB02B0F675A3BB7CE7
+:1036B00055B4BFBDA813D74BFCC43F848EEB285232
+:1036C000C9EC62808305F16A9ECF6C80773FC0D3DE
+:1036D000573EC0894687EFDDFAAEBD52D7FF698DF0
+:1036E0003E04465FA4356A9FE68EB73FA1B5A7307A
+:1036F000FA217663FB66131D939C24ED560A68C479
+:103700009718D92920DCEDD347F69E776BF4B7C81C
+:10371000072E7FD41E4AB02ECA2776903BA9A5A2B9
+:103720001FE0B56E3CE597E2F83A2FC577CD1C2E29
+:103730006B4BA7BB61FC4BC9AD911D2289167199DA
+:1037400049FF7FE5CB0E3AF3787D7434DD50BFEA54
+:10375000C80043FF319D0586F6AB8F8D30B48FEBEB
+:103760002A31D4BFF3E93586FEE3BB2B0CF5EFC558
+:103770006E34F42F27B718EAD7D97F60E83FD13BE2
+:10378000DBD07E836F81A17DB272AFA17E53D10366
+:1037900086FE37FB1B0CEDFF52D662689F1678C879
+:1037A00050BF65D2E386FEB705B71BDA6F9FF1AC59
+:1037B000A17D66E80543BDC6113A0EF8F9C1BC5FAC
+:1037C0001ADEFBD7DA4386FA7B844C4A845F2230C8
+:1037D000394329C87BEA0ADE9F8A382FD01CD07172
+:1037E0003F46A745ED49E4246F7F66C73BF6B9061F
+:1037F000396965749CCDDA7745DE49FCFE20CE2719
+:10380000A4D33EDDAD6F67F3BAE21F54BE42BBA442
+:103810007E2BF9EAF6FAB1BF2657297D13720D8582
+:10382000AF3A5055F17B743C2A2F2D6CC9A48E30D1
+:103830003945C8BDF85CD3FB2487442D74DC06777A
+:103840004EFB1A80091D5BCA847AF136A88B4A8028
+:10385000742580ABC52B1BF064862F71A55362EED7
+:103860004BCEAA083F75222992E0FB82C3BF9CAED3
+:103870005722A101027D7E410CF960F24B2DEA6FC7
+:1038800042F9F1FECBC7D37F42FF13426405F657DE
+:10389000108E0D234900F4869A2D4776E6233C6D61
+:1038A000204FB4F7E803A58BCD57BD38D85067F348
+:1038B000BD64FDEB61C6BA36EE4F8CF0A47086FA9B
+:1038C0005DBCD26BDD7E394EB716E8C7EA8A289018
+:1038D0008B28078DEDDA772EA4784691548A473BE2
+:1038E0002B973A3CDBA0BC90921B211E428AC5500C
+:1038F00005C04DAD60F0518F3B230D385EEDD5C155
+:103900009100DFC4F602212B187F7C3859D4AF23F5
+:1039100019DE1AC06E1BA6A3831C3FCA71BA6AD4F3
+:103920006FE6FEB70B321BDF455145C7B711466343
+:10393000A996D0EDC218586D9048384F3F0922BE65
+:103940002611B04BED1A3CC373B1EEE276E601F7F7
+:10395000D863218AE7B501D90F63550A0AC783DF07
+:10396000077AC056269235B4B65679C70EFCD19C5C
+:103970002F67835CB749B5C44BEBB642CA0709F45D
+:10398000C8E21E39F120B91CBBD88CA722FA3A9B99
+:103990000741386AF30F0FEAB417005D8EA776313E
+:1039A0009DEAFA6BFBD62F2B397C5BC02EA6E53A3D
+:1039B000657A2A41BE253381BE9BF3B344E4530E9E
+:1039C000A71EB8E4BF6F073E5DCDDF5FEB7F07ED5D
+:1039D000F4D59A1E37C1B179F44984CF2C81E9E33B
+:1039E00096918E19910470992578B0BD19782A1393
+:1039F000ED2BC65F267AA12DBE4ADA6E57BC256B29
+:103A0000E8F813464A33812EDC6544B121FF065C99
+:103A1000D9F4FB0EDE5B524483FC706732BAB57F8B
+:103A2000284414DADFE563DFB3B9482480EF2F318F
+:103A3000E0C551169A4246513BE91F167C8FCE9144
+:103A4000D9114727233F5ABD6C9DA488E1C94BFF7C
+:103A500077B1808EA7C806BDB1BC5CF647E9779602
+:103A60007A5C484F563D5EE9779DDFBC1084F15784
+:103A7000E5DCE3584EC7BF50DEB40AD8D2F2E1E429
+:103A8000CF80EF2CE6FE83A6FF6E70023ED04A6721
+:103A90009787443360803BFBA403CF87ED6F1CD630
+:103AA000CDF315C19D89F2F56A7235CA854BBC7F8D
+:103AB000A13EF2C6E121080FF172E879A589AF9B1A
+:103AC000F235BDA5FAA6E9ECB2F302D36B442D475B
+:103AD000384B9C9F9BC6936EB05BD7E5CBCA0ADA86
+:103AE000452A93A3403AF0D74DBF0FB6190179ADDF
+:103AF0003475B2E73F32C8CDD5FDA7FAA37DC04DDE
+:103B00002A34E99B4BACBF0EE0A7EBFF31C0CF19C5
+:103B1000879F8D0453A3402FE149063F7655F9FD59
+:103B20004A94FE73D580470227880E8EDFA37CA8B7
+:103B3000E30F5B4E84E8BFAFC9C55BC44037C861C3
+:103B40008BEC4739450A64F447CCF32B1299BC89B6
+:103B5000C3D92E111D7F902911843BFD0BDAB33898
+:103B6000FCE85F8AEFF57F00FCA88E8E3A47E1F310
+:103B700046A984CE2793A8CE2BE9FB1291A03E48FC
+:103B8000CC47BEA5ED13E474E0DFEBFD20079BB846
+:103B9000DF47BCED3EBD5D3E4864788DB7477CB7DE
+:103BA00019DA99BDD3A4D9F5DEED06BAE8793F8DCF
+:103BB00024F43FFA89CCCE1E247A39FD6C47FF6D80
+:103BC00075E69418A02125FB7A7F25F0AB97201C81
+:103BD000343DA1E905AA2F0689FDE2E3C98541220A
+:103BE00060BB51FF2695D726BD9B52649403446F5A
+:103BF000CF14C07F73BC482FC4ACEF7919BCF1B2AD
+:103C0000F8AA97BE2489FDC5692293C344CDC4F5A3
+:103C10006B7C45B83D61D5E882307AF5F0EFCA306B
+:103C20009FC180E7080EEEA46E15D4DDA416EBE765
+:103C3000CB4AA200279BD4D54CB87E54F313F8513D
+:103C40003C0E936C1DEBC727D60FE5A207F16971F7
+:103C5000D59210D2F19D68070A6A885C447B30CC0B
+:103C6000F5AADF07785C555F473EA28B711C9C8CE0
+:103C7000FEB9941308807F6F0122C8A6FF7795B222
+:103C800052F22B7AFAECC123598EE3592958609DE0
+:103C900056977D16E801ABCB3B0DCBA211730528DF
+:103CA00053AFAF1391AD12D393361EA5AB79228CCF
+:103CB0009719427E96BC412C892B13ED57DA5F0988
+:103CC000269C07A703DE2F29DDF5D08D0607458644
+:103CD000F1CCF4E428A51E8988D54E986F7F8EED2F
+:103CE000FE739A960088DD24DC3C94E2AD7FD7AC6D
+:103CF00029A077DCA07FE83A5716971C01932FD5AF
+:103D0000EFDD70BD02710022001E56C360D7C0787F
+:103D10003F585E8EF10FFA37800A8B15C172E61F8D
+:103D2000044C76ABA8489A7D26F669EF08176DBD5E
+:103D3000DF4FB67E1BD1F115EAF17B2ECFBEBA93D1
+:103D40007D4FA5FF037E4C33E9D9D480511FB84D78
+:103D5000DF790E6089F05EF2BFF23D2FD96857C05F
+:103D60005E2914BD114ACBA9C49B067E946302F55B
+:103D7000EF68DD9BD3ADC2942E859795DC8F25949B
+:103D80009FF5F47F88CBD7ECAA4DB39AE8B8E74B00
+:103D90005D7EA0E7FE549C66A4F75E4F4B3D31F07C
+:103DA000734BF136A4EB06AAF00AC03F2816D15E89
+:103DB0005F5DF8BC57AFC73ED1E4502FFA208A347C
+:103DC00096FB93143E9642319032EA9FA70FB3FDC3
+:103DD00074B9F4E1BCD3888F6F8BAF2FBE257DFC07
+:103DE000B3DF5B992C3EC1E559765523F35794BE5A
+:103DF000FD83DE78DD88787550BF26917CBED08348
+:103E00004FB57769D02BC6B880F586EFCFD8D107EC
+:103E10003CAC33CCFE3F1B37A5CEA27C0CF6ADE408
+:103E200035F841AB958D2AD8F3E7C12E07FB305CFE
+:103E30008EF16152C8E2B5308048EB294A20C2FCBD
+:103E40009B08D1EB4139C71877B3643A8CFA7B866B
+:103E50002AE8E79F5227E33CECF0BD4C8CE746E0B4
+:103E6000BB162F89A6A0FDC9F0079F62F180072E1F
+:103E70008B0E347A053398D1ABF1BD553925241119
+:103E8000FE7A7DEF56E37C93CA25F37B2E4939A554
+:103E9000B35392BF2791533A7BA742DBF7E178A255
+:103EA00076DECB422A9507BEEF9310856F133465FB
+:103EB000433C94A03E6BF29578519FEF124C7EBB31
+:103EC000C2E84749C7FEA29DE94DAD9E7C3EECBBD2
+:103ED000F17D2405FDDA64FD1BEACB1E9628713ABC
+:103EE000EB0E6D92281E1B97076604D1BF3DB249A9
+:103EF0001A12EF5763D1FC76AA3EC7C6F7072442D1
+:103F0000FB21DC4472F12A78E825CA588026FBB3ED
+:103F1000934E6CA74F391E89D0E3CFD021DB609D33
+:103F2000189F3886FD60A08B186FEA6275FA22D45C
+:103F30005BAC8100CE4B0ADBEFA1F06A49E17585ED
+:103F4000D7D378DDCBEBF9BC4EF505D49D32ADD39C
+:103F500032C51AF662DDC1EBF9BC9ECEEB69BC5EE0
+:103F6000C0EBC246ACB7C86CBC3552848DEFE0756F
+:103F700085D7D379DDCBEB05BC4EB6B1EFDB58DD91
+:103F8000618DB0F19DBC9ECFEB19BC9EC6EB8379D1
+:103F90005DD886F564F8731452F81BE44367BC8E51
+:103FA0004A84C3B5A7DE656A67F49221106E87A9BB
+:103FB000D960B71D98757F36C4431F3D71B50FE8B2
+:103FC000A7E1668D9EFC283F49CE4D28C7FA737F36
+:103FD000AEE1CE1518876808C98C89787C26DE5E2C
+:103FE0007204F4F6F919A21F1ADB92F82FCF723B74
+:103FF000FE191E97799AEF57EEE4FB95DBF97E6583
+:104000003BDFAF7C92EF573EC1F72B1FE7FB959B41
+:10401000F97EE526D8AFA4FD36F0FDCAF57CBF7267
+:104020002DDFAF6C81FDCA6140EF7558AEE2FB95A4
+:104030002BF97E6503DFAF7CE4CE92DF16D2F59DCF
+:104040007789680F24C347F16EA3FC1CB1C3283FD6
+:104050008BB6A41BEA43370D30C8F7C256E3BE4502
+:1040600041E308435D595662A8E7DE778D61BC9C49
+:1040700085C67D8B01736E34D4FB05A71BFAA74F51
+:10408000B8C350F75E5B69A87B4AEF36D45DC5F7CD
+:1040900018C67314FEC450B7E7AC30F47FDC52800E
+:1040A000F42567AE31F4935C1B0DFD6A1C81CF2DA6
+:1040B00020EFA6645E967C237F57B3F4F2D2AC1F48
+:1040C0002CB92410403DC7F411C66821AE3688C50E
+:1040D000AFEC1FDE7004FC175B21D353E6789579B3
+:1040E0003CD9F5D431957EA7DC73C4D7A5A35BE298
+:1040F000D3BD47979A2A3139B9E64146DFAD0F263D
+:10410000A673D404741DADDF248E17BB258B418F9D
+:10411000687E4DEB8302F6FF67C7D7DACDE3C6BFF3
+:1041200047713D566FB744F87CA88ED0D90BD6AEF8
+:10413000B4D904F53CF3972D9CDFCB27F84F3452CC
+:1041400078AFF412BF8DD657BA2A02CC2E1115942F
+:104150000FCB6E46BF5EEBAFCDABD1359DC917A27D
+:104160008B5BA29C7218E20A2B33FBB6DFE4980546
+:10417000E37F969840A2542FC95270523EE55FF9F2
+:10418000A8C5BF9CA07E4A181F206423DB77F619C0
+:10419000E3A68D734CF28FE7655835F9965981CFB8
+:1041A0001BBD7DCFCB06F382F9F07959634E2C2DE0
+:1041B000B1149CEFB85806D6CB6269585E1D1B88B7
+:1041C000E5D8583696636283B12C8DE5637955EC5A
+:1041D0000A7CAF24361CCBD1B1ABF0B93F361ACB39
+:1041E0002B63DFC1E7A362E3B01C19BB0E9F17C7A7
+:1041F000CAB1BC2276133E1F119B8CE5F0D82DF876
+:10420000BC28360DCB61B11F6039343613CB21B1D8
+:10421000D95816C666613938B600DF2B88CDC7324B
+:104220003F762F3E57624BB0CC8B3D80656EECC71E
+:10423000580E8A356099135B8EE5C0580BBE372047
+:10424000B61ACBECD843F8DC17DB8065566C339696
+:1042500069B1EDD8EE8DB563991A7B169F7B62CF5D
+:1042600060E98EBD80CF5DB1BD583A63BFC4E78EB3
+:10427000D8CFB14C891DC2E7F6D8012C2F85A74BAA
+:10428000D9C1651F1BF79FC77E68DC7F2E3D6A94EE
+:10429000E3256F1AF79FFD878DFBCFA35E31EE3FBD
+:1042A00017EF33CAF111BB8DFBCF453B8C727CE815
+:1042B000963B8C7A6493518E17B4DE6DD4238D4671
+:1042C000399EBBEC27463D72DF0AA31E59B8C6D003
+:1042D000EE9B6394DF59E431A39F3E619B518F5C59
+:1042E000FB53C378AED2E74D7E4D04E58BA3F817A0
+:1042F00086F7EC85074D725965F2C9146F0790C0B7
+:10430000FEE652E2F0835F63C6673A970719C0770B
+:10431000B4CCE47CD70FF88E96E9372DF4013D64D8
+:104320004C2D9B0576CC85138202B132616ADD305B
+:10433000D8EF491F48583C818CB80EE2684DD95AD5
+:104340009DA8026D6F1A4430BE40D4E5150117C612
+:104350009BB1FE5BE9C10AC88B69B2F276B292B535
+:10436000A7B0FAB1C6392BA03D3DB5231B12991E4B
+:10437000B72696E75D12DBDF1B28057E27D1F5FF08
+:10438000B5BCEB7E88CBFDBB3DF4AE449F2FB4871C
+:10439000F2606BEDAC35F434A88E02217014FA8D06
+:1043A0001402EF4928B78D71D629A038E9F37C298A
+:1043B000F807E89731D527C0FA353834B9FB9ECFD6
+:1043C0005B5C3F35A511F437D5D57C3F18FE34BD75
+:1043D00041F5E1A34E0FCAFDC86A799B8DD9854688
+:1043E000FDA166CDC6786273D312D4C7805F4BA29D
+:1043F000386B17D653C1BA1C0C7181EE5C89968B51
+:104400006CD126D0275FA5751E172C088FF3B09EA0
+:10441000FB6F0C61FF15CEA965B01E0A8FAF383C4B
+:104420002EF4050FFA17F4D1F9F934AADA2D18E2AF
+:104430009AA9969060EDC7F653617C5FC88F7ED9CC
+:104440001F25166FD7E047FFEE4BD7E23804DF4B4E
+:10445000B18EE93D9E368E000003BAE67A51A3EB99
+:10446000BA247A4A8B7713F5E66FB5EF7444E67E8B
+:104470009CE93B16C98FFBB6E6F72497510E5A5DAF
+:1044800021CC8790A5C4FBBBB28DEF5B6D997A59A7
+:10449000FBDC3BB47534DE7C59FDDBB5FED43184E6
+:1044A000FE391C8E64CBCD4877055C1FE770FBEEB0
+:1044B000D09F6E58D14AF939429FD912C41122CDEA
+:1044C00022EE6BE6D45082CB8FC37BA0C2EC42EDD0
+:1044D000BB036B8D7198031A1C375D1EFCB5FCCEB7
+:1044E0001C4AF8BF28E93D0FB2632A5B8F9755A598
+:1044F0000D417B0A9D5701A3253290BA23FA38A0BB
+:10450000793E84EF5F0CE4C30D74B1FE649771DCF7
+:104510005EDFB5BC32BA2F3DD8EB3BDF723FB0CA8D
+:104520009A783F95E20BF13DD064FF69A5B61FA8CC
+:10453000D50FFDA9DA0E7677D3C24ADC6F6FF23160
+:10454000FD4DBEA6A38E8DAFDB3CCE4E0EF7EDDC4F
+:104550009FDCB9A902F31FC96E237D0E79F8564777
+:1045600088D96FE9503ED5C6FA0DDD3C873FAFC410
+:10457000E7DB5BD9F3C16B4BF9F3127CBE23CC9E16
+:10458000176E98E080784EA3B7221DE33A75F44F7A
+:1045900027EF86784322C4E386B491003C1BECF5F8
+:1045A0008B20FF0BBD012CB5790FDAB4AD7C38ED53
+:1045B0003F6861703AE4B952C2C4FC430221153A23
+:1045C000EFC7F87A73B5F690B1BD8D7F2FAFAD729E
+:1045D000F970FACFBC85A18D934BF1997F0889F7CB
+:1045E0007B848F63D7DA03C6F6306F575A4FA21811
+:1045F0005016FADF9904FD9A8DDF5BC7FBB928B32B
+:10460000C1BC0B16061CC3615E45ACDF131ADF9AF2
+:10461000E482146E249375DF6BE5F3B62C64715657
+:104620004D3E6CE37180AD10071816EFBF46EB6F7F
+:10463000DFFEC4C7548F4B0B593EA9D6DECCE7A58D
+:10464000E5E514DC678CDFFEC2CAF8B85B66F15B97
+:104650008DAE92D13799271AFC3D127218EB337444
+:104660007621D403038CED6505C676FF0863BDA8EB
+:10467000C45857AE31D42FF4C4613A53F471182D95
+:10468000A6F384B712FD9078FCAF3B459F479ECBC5
+:10469000F9EDC9BA12ECD7E0E27C64CAA769522AE4
+:1046A000ECFA7DF8BD9C8FF6413C84962F40FE3697
+:1046B0002DF78F0ED8F341BFBF67F16F23C9E1B665
+:1046C00095E3710BE7C3C7009FB46CE3F87C84C724
+:1046D00075D6F3B8CE5A1ED76981B80EC667585C36
+:1046E00067158FEBFC8CE7A1EFE1719D67795CE7C3
+:1046F000191ED7799AE7A1EFE479E8DB795CA79DE9
+:10470000C7752672F9BD7F624736C4D91E9F98D8F7
+:104710004F9E28337D168480262DAF224A8315E8CC
+:104720009AC206F6754AEA148B0DF262030CAE25A6
+:10473000F3148BCCF271F06F3AFF0EE815CC9F7931
+:1047400093E7F5E450AB4847EFA30F4709E47564DE
+:104750004DF08E8690682AA747DAE6837E5C0D903E
+:10476000ACC35E307388640978E57E303EC17EF963
+:10477000BBC307C19C1911ADAD70D2F78B5E0E564D
+:10478000504F9B0C2DF21F1414C8170A8880E7FDA8
+:10479000E5FE234A691C5F741606BAA073447D9631
+:1047A000A7E9876B8D7471556C2BDACB4D753C5F27
+:1047B0004A2109FD78ADF45E2B9AE249463FAA6989
+:1047C0009931DFC35C8ED861F4C38BB698DE57FA9B
+:1047D0007E7FE826D1145F33E61137B9A6F7191F9B
+:1047E000CF8F4DEDD35FBCC552799D3C265E77C619
+:1047F000BE8BFDCDF6A004761EB557A5A37200ECC6
+:104800005DE9A837007113E9A8C24B3F7F1EE0F5B0
+:1048100020D6A9DD1884F1295E0C76A3850A7CD800
+:104820001BD90FC21DFD908B2B02D418DA7F1B41C0
+:10483000BF224D765EA7827114988BF891397E3233
+:10484000E4DAA7210E12A911C9365A7F7C61DFF282
+:10485000AE575E852B80FB4939B5DE124B1FFCBE7F
+:10486000A9569C94689F6C31A7EB95B5D3BDA83F22
+:104870000E5F326F60B1ACCB1BE8772BCF1B38C318
+:10488000F2E20669EBBABF6F3A78D4B48EFE49EC17
+:10489000EAE735BE73B1BC138DEE330AFAA6935521
+:1048A0005C3EC62222E904792B05507EF6BB358496
+:1048B000F9F1A0A0F57CD2F4CD75C887EA83EC1C91
+:1048C0004FBF5B03449F77AFCD63504E17B875A4BD
+:1048D000E9C03896C741E10FFBD74D0708FF8E8A24
+:1048E000C2C17E1FA980EFD9492DB1437CB3CEAFA1
+:1048F000C2738B8BC10BFC55DE1FE7D5BC4CC49437
+:104900008A86092C3EAAC97F8D4E1A7C3C5E3F41A7
+:10491000C278B7E4AD8D02DE9B46133C6F43EDAE2B
+:104920008B1735FF06F2BC323BF1DFD6A26814E8E4
+:1049300092042621FCB4FCC026775639ECD3ABF3A5
+:1049400035FB82E7A14A7E3CB790D3368AC5C33295
+:10495000C3985771BF187A4EEEA7A7BB0E844F536A
+:1049600092F3056B6596F7E44B82D7F7B91CCE90AE
+:10497000A393993F4AE93F419CA093F7DBD23CFDCA
+:104980007743499C7FB5F63F4A0AB66BF59C988CF5
+:10499000F3266DDFCE0FB85EF3F74CFE9B550A1A77
+:1049A000FCB05CAB82FDB4BA9C699467973F4F89B9
+:1049B000E54316DF68C073C680BEF9A689F3CD85CE
+:1049C0004126BBA3B088ED1BF7D81D22F150B86E6D
+:1049D00035D193A647AC45DE0DC3F27BD3C5D66572
+:1049E00095AA00FB2A7E82FB426E7F4700F6055D9A
+:1049F000399172B08F291DFC15E840A38B9CB6B18C
+:104A000008EF1735BD57472A0209E6AFD975E06FA1
+:104A1000F9D2616493DF43825EF0AF7296331B720A
+:104A2000208F2B0C54FBF6FB2E77FF5ADB4FCEA5C5
+:104A30007FE0F7FC42C3F7A7A6B89597B2EC589D64
+:104A40007EFF3443B0E8E8B2C7CF37BD47FD0B6FF8
+:104A500022B92D594259361DBD98FD77B39F4D7A25
+:104A6000E5BD9512C89BB24C997404F21F7BFCED16
+:104A70002D5399FCE278B3727FB4B73F79A7BF2F6B
+:104A80007D627599F659BEA53FE9B719F34B2F3BE7
+:104A90003FF75BC6231A789E5E2FBFC3348E180E75
+:104AA0008889CE6D0C091BE12EB98C76C79556C648
+:104AB0009F839B8D71E4BCBA0189E39D3C5FADB2DD
+:104AC0004CC39372FB1F29BFCD3F62653E10F78335
+:104AD000B578D37C9E375D09796C144F7348D00349
+:104AE0008D678988F93167C93B9EAB747C536563D8
+:104AF000E7E848B3F5249CBFD0F2B3E686595D9B46
+:104B00004F759BB15E45A66741DCB56A9395403E03
+:104B1000D67C229DECD2E64FF9FDFB366607559315
+:104B2000DA26906B2B793CB1D24B24C8A7AA79E93D
+:104B300089B1709EA7C6C6E4F7E714FE8A2EEFE699
+:104B40006E574406FEFE68DF55DFFF0E81F7234DEA
+:104B500003406FA6253E0731BBD938BF4BCDDF3CA4
+:104B60005FED9C46B27948BB8484E7151FD0E25EB6
+:104B700097798E64BB8DE13FD939924BBDBF0BDE77
+:104B8000EFE31CCAA5DEDFF34FBEFFFC25E65F6343
+:104B9000EFBE1EE4C4AACCDA20C8552D9F651109CA
+:104BA0000520566379659A3A50D1F5F35D66BF1CCE
+:104BB000DACF7219FD0AFB1EEF1CD7C3BFD9BD5D4A
+:104BC00006FE3DFBD31353C12E58F04B0BB1533AA5
+:104BD00038B7DBCDCF8B4564D08F77EFB360DC8007
+:104BE00048D1B1B7E8F20531B3908EBFE0676EDC13
+:104BF0005FBEFB795B640A7DFFEE173F1A45281CF8
+:104C0000CEADE87E7D20D83D3F1558FE95DA35EAD9
+:104C100016FAFC6E89DC154CA0B73A391F9CF9B91D
+:104C20007306D099B0EBC00F71DC8EDBAD369D5EA4
+:104C3000F88DCD8AF0A7FDD879AC6784C81081CDF6
+:104C40004F9F2FAEE5BD9D794660F37BD91A498110
+:104C5000F9ED6A9743B4DFE25D7F43BABEEE677B4E
+:104C60003C0087C52F5B0CF267F12E4BD4360ACB84
+:104C7000133694F701973016E049500F2CDA57831A
+:104C800079B28B3A5AFE66F1C0FB46FEA270C17340
+:104C90001F0B3EB0F8A740FD85A73D60C77EDEB97B
+:104CA000D30370A5E3CE92295D7DF7EF3A3E246CE5
+:104CB000FC587AEFF1205203F4B5B86335FBDEBE41
+:104CC0009B4F837C5B6CE2E3CFE11FD9BDF547CC02
+:104CD000668C479E276F8E857D0AB22B23617E717D
+:104CE0008FFEE07CBD60CFF9AD709EF8CCF37FD92C
+:104CF0000A76FDC2FFFA72EB03100F7835C50BF28E
+:104D000068F14FDFF3101DFC33ECCC8E3FF7CCD3B2
+:104D10004F3D46F9E4DCEF6D68E79CFBD5E95C8527
+:104D2000AEFFDCDE7F64C1B9DBFB7E35B13FC0E3A3
+:104D3000BEFDD7F5EFCBCF00BA8DD8F4F88D207E2D
+:104D400095970596CCFC0A2F4D783AB4EF502ECCAF
+:104D5000F3EC311B9EBF594C9FD59500DE6A503F46
+:104D6000407D1985F7A2DDABFE66199508EEEA4095
+:104D7000113745A203C1C85EB4EF967F195F0AA53B
+:104D8000D5AFC078A41BE5BBF9BDC547297EAF4CA4
+:104D90008ECFF3E46B19E0BF78F76AF6DD0E8A4F29
+:104DA0004F6F7C9E857F8CEB8DCF12BB199F0B9F25
+:104DB000C4D8E8BE8C8479241A3E6BF6DFD6A7DD12
+:104DC000A0C9874BC1791ECF9BFA2F5BA0C20E7C76
+:104DD000F6BC53F5313C47A6D0B6737BCEE7124AFA
+:104DE000279F5ABB7F0872B2FB57362FF81D77FFFB
+:104DF000EA03E4BB73FBDF961576FEC42550BBE2E5
+:104E00001CE9F9EB043B6311DF335BBCC31DB579CF
+:104E1000E2F85A14993649F1E0F313F83CC2F8610C
+:104E200051E4C0AD4202FC2DB31730FD14E9877088
+:104E3000A9A19E0E9CCFD7E35528037C9EB81EE8FF
+:104E40002F193EB5F57B61FD57EBF0BA83F1B1B98F
+:104E5000FF22CAAF20877BE137227C00E5B9769B31
+:104E600004F991E7AC2CFE66C67B1CFEFCFCE4B7A3
+:104E7000B417EFB727D97FE070B814BF5F6A7DDF42
+:104E8000167E73EC0A8E6B86E399AF13EB838D5C11
+:104E90007E2C22B59306E8F499CD4AF5593ED87B8D
+:104EA0004175A0109F6F538705E5FC995D9608E852
+:104EB0000BB3BC584412EFDB45ECCC7E59F4F281C5
+:104EC0005120D7CE1CFC39A74B46F78B769F9055C7
+:104ED000AE1F227AFD90C4DFFE291F6FF12B89C718
+:104EE0005BBCFB6F09C7FB5C0ADC0EF3FFBCD34A5B
+:104EF000543AC4E71D964989ECAD4D76AB31CFD617
+:104F00003DF6582A7DCFE27128B0EE8615810F5408
+:104F1000B04BDEB1629C9648FE4F6D78DEDAA1ACF4
+:104F2000A1706BF054613C451BAFD10427C91744F5
+:104F3000BF54CA0C96329B3A62F0A7ADD4DFD5CFEE
+:104F40009BEADD1CD04BC7479FB6C23AFF6CB21F2D
+:104F5000FF2C91A6FE74BC3FAB827FB992C85F3430
+:104F60008E1F5A66218A5E1FDABA8FC37CC8AF5380
+:104F700008E4AF595E4D51419E2CDE9A12817DCDE1
+:104F800043FB2F3C05703BF7A48DEF73B23CDB6A0B
+:104F9000BEEF777AFF85ADFF49DB4FC3CBF4FBD57E
+:104FA0005B697FB0DB773B315FF3AFCFA78E2254D5
+:104FB0004E57FFFA81A9205FAAC1C7A2FDAB7FD6D9
+:104FC0003FD240C73BD58FD54FED191401BC2C7C87
+:104FD000E1578B409F2C78CE4980240FEDFFE0876E
+:104FE000503FF76B37E67B9DFBF5E9EF021F507BE7
+:104FF0005BD1EBF5F9FAF3DE74DC055067EDC245E1
+:105000002EEBC08F590025A5F7052FA7E2F9075D04
+:105010003F7C6FB1ADFB7E1688520788E8134507C9
+:10502000001F2ED865FCDE5FEDCC9E5A2C7757B161
+:10503000FEE1018C5F3BF1BDAF353AE5EDE6F7B53A
+:10504000FEFF612F308DC3DE5F6423B589E8DF96F4
+:10505000C2C65DB0EB9B61C6F118BDF6FE0E7BFECD
+:105060002381E5E793BD29B84FB0508E0E4D2FC672
+:1050700078C73CE0DB859EE8D034FABD5F7279B931
+:10508000D041EBF4F9003E0FE80F7562EF7A0EF0B5
+:105090005BF3520A017AAFF9B51BE3C9352F5E38CD
+:1050A000F5387D7E66BF13E37A35BF5E8AF8AEB110
+:1050B000457F08F1BDEEBD36B28DF63FB3F7B7B907
+:1050C000608F9CB14673D3FB880FD574D87832B803
+:1050D000711DD42F28AAA5F35137B0BC9C3AC2EE5B
+:1050E0001DA883A00ED0F18729EC1C31DF97BA8769
+:1050F000C7A3BE98A3A4E2FCAFBD893DE7F1867BC0
+:105100006E56FAA7E9E6017973E42AEA97C8B5C3AF
+:1051100040CE5A62371105F6FF6283B1D4FA59E0E6
+:10512000FE8662C8DF62FB7ED64C3FA9A6E5D2743C
+:1051300012C2F397AE1B7BF8EC7714C5F76C56FAE6
+:10514000C378FE14265F6A1C81F129980F69BC7729
+:1051500041DDCFD67581DFA7609EEF05AB6A03798D
+:105160001EDFAF6379837592F201C47DC9112E975A
+:105170007AAD9FF1D917DE74E4336D1D2DF55E9481
+:1051800027ABEB7D58AEAA2F220AE629FBB16EE1D0
+:10519000F0B015AB04EE99001E843F9B2B1880FBEA
+:1051A0002C604C88B75B5C21A42F9BAF16630576FF
+:1051B0007EFF8EC5A5926A17C467189C206E0C707E
+:1051C00092795D6A9B8270A5EFE3F3898ED09C94FF
+:1051D0003190EF3BC220A7E4CC1243BD17DC34BAB8
+:1051E000D8F3BF0D3F82F05A5D6FC772557D19C26B
+:1051F0006D657D00EBFF1FE0D7CAE0770D5174FCB1
+:1052000023675618EA49E1B799C22F33CE5766385B
+:10521000D4F1FC1C8D9F92F1EF23F504375F36D655
+:10522000B761A93D4F4FA2D7CFA6307BA48E8496FD
+:10523000E33EA897C56148A64A7274F127E253F18C
+:105240001C089E3785F69C9B307EA9E1D7E2954EDF
+:1052500019E59FF201AC67E91B5611E495A56E3B79
+:10526000F92843C7C75382290AC2D98F71E006AE15
+:105270005F57F6E0D3C81F2DF50A966B399FACE750
+:105280007CB201F00EF13DBF88386D9D44507F3EE9
+:105290004CEBCCDF8F127D3C3CCDDF11B552FCA333
+:1052A0004C52B064F7701CB34586D0F79CC52400FF
+:1052B000F49276ECC7115C2BE9C0F3D669DA3D3085
+:1052C000AF14A4CDC4FD1F62657A8A585819B682FE
+:1052D0001F65866F83FF20DE2F916C3EE5C7E70BCD
+:1052E000F0BD0B33D99E59E69D1DC7E03E0857AB74
+:1052F00013FDCA2C7F6D5E2ECA571BD2ABCB1F127B
+:10530000AA7578CC4A62FF2D734CFE23D0E38790B8
+:105310009748F1BBB16D700AC0B9C5DAE10379D81D
+:1053200092C6F48D3283424177BFD86B5C4E7A4A85
+:105330008D724093CBDE6B4B0CF4ACC9DDF40946A7
+:10534000BAD7E4EECF7AE46EF02CC8DD8CD816E440
+:105350004B331F34586555B812EFA361F1A7130200
+:10536000DB57EF2D0F70DFFD8BAEFC6D701E5BE326
+:105370001FF3FAA5E6C9F89D1E7BD09A381F60205E
+:10538000BF97A199D21BA174D44AE90C10B18ED257
+:105390001994614A678C9FCAB0D4E8780561324499
+:1053A000DD27B279F278ADB67FB2C25E12003CAEB4
+:1053B000EC603C34C8C1F7493345CC0B90A83FE9B9
+:1053C000A28FA403E3EC605F4A56B68FDFED163B75
+:1053D000601F7FA56BBA1DF24A85B452A49FAFDC53
+:1053E00095797DEDEBC0FD6B407F5E979F9C2C8E89
+:1053F0009F9BB4784B08F8A57B5C9D98DFE472888E
+:1054000086FDA71A47A8C0A1AB8F84AF73BCC3B0F9
+:105410007B929CBF1CC5D743725452A893133DF78F
+:1054200025292A29D2C98B1543AEC7FB987ACB8987
+:1054300024F270E7FF8C3C6CC88B205EAD66F9935C
+:1054400019C03BA068A9C2D50AD43A5FF983D148F4
+:10545000A7D739C00F716DEBB183BE57D07B9E6665
+:10546000F917D76B0AC6C1A85E7BB40CE46952BDBC
+:10547000567B17D271EB4005E8F8C0BA079E84FA54
+:1054800047EB6C78EF4B556C3551E87CAB63E3B080
+:105490009CD7F61096956DED94890859BEB67ADDC5
+:1054A0004CE8BFD982F19F5391ABCED5D1FAA95622
+:1054B0001BDAEFA7B6DC9B07F6DFA956A762017BD4
+:1054C0007FCB18637B33BBFFE5549B356261F47B74
+:1054D000D102FB1184CB778802E9E64B4A15B4E38D
+:1054E000BF30EDB754AEB705044F72F857B625B6C6
+:1054F00027F1FC36E45C93DA61205FCB8FFF380F35
+:10550000E84393334BD3A9DC03F81DB79144FB0266
+:10551000131D1317039E263A024B19BE2EEFDEAC65
+:105520008F446A77239E429E6986B82F8BAB7EC4D8
+:10553000ED72624FD2EEE1EF7B13B7D7B4FEE5F523
+:1055400007696D55B131AE6D8178B500FEF83496BE
+:10555000EFA0ED03F5A66B664FB7DA50AECCE1F1E4
+:10556000288DCEE37416F2F07C31031DCE8F6D4092
+:10557000B927B48C7C741C85DF9794FE803E84969A
+:10558000F1FD01BECBD77C67FD9D74FCBFBF69C137
+:10559000E7F36229D8FFB307FD8FDE09FEC2BF5BC8
+:1055A00009C89FBF1F9988FBC89F598D718C7227AE
+:1055B0009397AF72FEAF8AB518ECF3AAE6D932C45E
+:1055C00041AB62EBF079156C22611EFD1DAFC10687
+:1055D00070152CFD1A78FFF6892B509F96601CAD34
+:1055E0007AAD2D619EFFAB0EC520AFAABB5A715C90
+:1055F00042EDB3CC2C3E9E4EEE54C732903F8857BE
+:105600002590F75DC5E54FCFFCB6580DF2E7B39492
+:10561000C4719AB71C6C9D55B1EF20DFF55EDF7742
+:10562000F17995F6DD2EC6A7F1F53C3A2ED17AE256
+:10563000EBB816FB7F9696F8FBE7397C4FD5CF2366
+:10564000012ABF2A6DB49F0BBE7F6F5319F8F95B17
+:10565000D2D205DDBAAADB1690806E5DD55B66C935
+:10566000FAFB29E378B8CF8087F36B16231E9639AF
+:105670008227400F54B68C1F15423F7F35C2F92355
+:10568000AB3F17E4F1E9B67B3D89EE913C6FC64F25
+:105690001BC70FB5BB4B75F8D1F0627EFFD49FAA34
+:1056A000BF7A10E4D466B741AE98CB5E78CB4F0C8E
+:1056B000B7544E9FA7A8FE0E21DC94178F015DAF53
+:1056C00075627E5C72F85D41427DC12F89FD4CEDB3
+:1056D0002CBB730C7C97201CAADB181D5C0A6EF196
+:1056E000EF723A284FBC9EF14E8D0EEA884A19F6A9
+:1056F000A47C293A7880A8F63ED6D143076DAF95B1
+:1057000017C6E960BC333C7105EDF729D83FC37A71
+:10571000E3FFA4AC7AAE017B678D05F7BD4E3AD4AA
+:10572000AC3B587D34C8E7939EF0D46B4AE3F5F95F
+:105730003B8778F4F73A9E6EA6704800BFF1CE24FE
+:10574000F453A892E2B1FFEFE8E7A324E760263A1A
+:10575000CACB019F249C389EAC959AFCB6A4BA7A19
+:10576000FC5ED0A3275D055F4568EB3A47E86627F6
+:105770006D6F4CBB1FF5FCC99302EAE1E57F5A3A15
+:105780000CE4702FFBB73EF6D8C743306EF9F8C76C
+:1057900056B4A7705C42ED1FD003986F8E7EC04058
+:1057A0008CB324DBCFBD172EFF1D13DFD7D5F66FCB
+:1057B00057D6773E04E313BB4ABCDA797D054A66C7
+:1057C0008FFD07CC43179F97AD21AF1FFC5D810470
+:1057D00081EEAD52A819F20CADBECCD1AA0ECE4BC3
+:1057E0009C2C2F27E5F0E1E67CFA7ECADCDF7921EC
+:1057F000CE67A3DF81D29E237DA18F975B3359DED5
+:105800001729D43D2F8073C8B46E883BD0F9F6E1D8
+:1058100037FF52E8B9670DEF379EA95DF405A0A3E5
+:1058200074F37B2D7F456A64ED695A73236BE771CE
+:10583000D4C5952C4E7A68562AC24F5BD7CC5756A2
+:10584000E17D6B335FC9C6F34C335DC33E0178FE27
+:1058500012126B80EED3987E36D3C5435CFEFCA05B
+:105860005D54AD74BCC3D6EE834EE08B1F09E85780
+:10587000DFF1DE612B90FC1F8E9EB4425ED45D9002
+:105880005844D7338B283233A223F8FE6CD2E1661A
+:10589000F58E7E70FF697C3CEA32C3784BD8FEF30C
+:1058A0001DEF1D9D086A948EB712CABBDE24328C90
+:1058B0003F6B9FD2C48E43F1F15EA1E389F1F17A8F
+:1058C000E027D9111E71F8D8115EBFEF395FA2A28F
+:1058D0007DA1832FDA2B1A7C1B006E147E33536755
+:1058E000DC484625E79799AEA19F9051F1F998E1E0
+:1058F000FB7768A2FCF68433B017F8AFD119781E95
+:10590000F867A1BD3B572AC073602FC2F34596507C
+:105910005E16A5ABB38342C3FAC1BD1E9D89F7795C
+:10592000CD7C7A1CF8E54A28295FC03CF879951FA0
+:10593000F2751EFAF169379E47D9FF412E943596CC
+:10594000AEB5B703BFFD9B05EDCF2FF60DEB33AF23
+:10595000EE388FBBBCE514F9796BB6CEBBB83D779A
+:10596000D73E6704EE41BCABCED2E35F015DDF55AD
+:10597000C7F24F88D439EA56833DD9C8F7437A8FA6
+:1059800003FE82791C6D9D0773075C01FEE593633E
+:1059900064F4230EBCF9C5EFAB69DD31C88E7EC25D
+:1059A000DA344EBFE5CC6F7D322DE01C09F1AF3506
+:1059B000E97E95AE73CD6BA443A4703A38FCFE48E3
+:1059C0004529DC0B2D62EC6C7D6C7BB802DE2B660E
+:1059D000F7CE78B95DBABEF3641BD0E3E96336DC79
+:1059E00077F8CCCDCE11AEB10673C18EFFA45D4E5B
+:1059F00078FFD99FDD12CEB75DE81280CE6793B0F5
+:105A00001DE4C5BECEE9FD613E1E3FF102F99FDEF9
+:105A10006211D9FD685ABC252AB178BF2AB17A80B3
+:105A200097DE14FD7D63AB274DC03C8F39AD6F63AE
+:105A3000329EA734F13D3FA92E365F7767FA64BCEA
+:105A40007773828879D86E7FB700EFE57556C8F80E
+:105A50007E58E8F3FDBC655ECC4385F741CEE75D3B
+:105A6000E6FB3617CBD3DAC0FDEC76ABBF69021D7F
+:105A7000A77D6D9A00F8D0FA292E26574E4FD0E216
+:105A800048618C23E5167A53E01E8BDC00323771B7
+:105A90009786F1BEEF6DD08FC559110EEDC35F8CA7
+:105AA000C23EF61A88AF009EAD8C9ED6AC1530AEC5
+:105AB0004AE13700F4C4270FDB6E8275E4350B5ED4
+:105AC000F0DD699970DE33DC7646E7AD8FA25F08C2
+:105AD000615A183777CBBB382F7792F5AE70B37B0E
+:105AE000F23FB9047D7CE964F726E6D675F2FBF156
+:105AF000A2780F5E18E004F54029BBDF440A28FABB
+:105B0000FC9838FF2CE7744802B0CF56592647203E
+:105B10008E2036B7CF8075CF0EDBC80D747DAD42B9
+:105B20006700F8451D23F2FB9402C7014EEB36F4E3
+:105B3000C73CBC55622017F4B0FA7F64DCA73B1861
+:105B4000F86233DC1FBFB54C46BE381860E70D9FC6
+:105B50005C56D00EFB94EEBA8AB6D974BC88574610
+:105B6000C9D2504ADE1806FB94CB44AF40FB878372
+:105B70005ADEB6D7017431DAF2E5E422D8C7CB1683
+:105B800031A6745A60F736AC5C56E105BCAEF466DB
+:105B90000A7AFFE5764E07C7D383B7BB287C7C0F14
+:105BA0006EF452338EF267C6151047549B65453B21
+:105BB000B70BF73D6470BC64748AD12A0FD65DF3CD
+:105BC000D2E13E5D162F7DE8C6108B73C2DEE85829
+:105BD0008C73F23F1FE23593D7D68C706065D38A01
+:105BE0002AEC0FE364D171324AC5E8583AEEB6B4F4
+:105BF000C0568CDB4DB4239C88D4D506708A4C1CCF
+:105C0000E0877B6D378E1BFA369C5FC938D23D1D0D
+:105C1000F4686490E30FED20A756CA0AF079C6B283
+:105C20005377C2F334FF23F74299D1F8FE0320A73C
+:105C3000D3BAFE568FCF27C986F862C6879F7D03E9
+:105C4000ED1941D910A7FC3A3DF81380CBD6E2708C
+:105C500018EFC5048C66C5D7B16779E724B8EFF8AB
+:105C6000F434D1BF8DB7E3BA3679236B18DC4A41DF
+:105C70002F68705B252A1D5158D7543BD24721E924
+:105C80004479950DBBD983E378C9F870F512C8D76C
+:105C900030CF679D4BE8B97F03EE09045C417E8CF1
+:105CA0009CCDCE15EE2DE9F4813DBF362D717CF2F1
+:105CB0002D377BDF26B238ABB9FD0D37A30710892E
+:105CC0006D252C5F7E24942EA2A64299630F40FE80
+:105CD000F35E51F923D2F9468B02F881FE568ABF52
+:105CE000036F7C8EF1C503E177B17CC65DA4E5DD71
+:105CF00047B3E8FBEB4AD97DC7EBBC8C46AA9B991E
+:105D0000BCA8F675D961DFA4BA9878B7717A533513
+:105D10003843BC8CEBABCA5B195C338B09EEFB429E
+:105D20002C08EE9BCA827E147E99CDCB97201E490B
+:105D3000A73A98F65B07E3027E1A45C2C6EDB22386
+:105D4000FF862DB8EF49F9FD2D886B55B6F6C77D56
+:105D50007F38360CE3A5F3EFA6F3F1DAE938103F0C
+:105D60003CDD6CC17301907E03756519A565A4CFF8
+:105D7000EEF2223AAE52EAF5AED1E84093639435A2
+:105D8000E6507D01709BA3AA4B80FE4EDABD6FC02A
+:105D90003C9C9B6C0AAC7FCEA6979682FDE2F47584
+:105DA00035837CA82E63F34D6FA5CFD1CE51DE8213
+:105DB000FED5AD36857D8FC3AF94D31987C35C3EC6
+:105DC000EFB95BD8BC1D832261A0CFEA6514AED0C9
+:105DD0001662740F21D18B22F2D51158BF5BCDC250
+:105DE00071FBCD30F18589FEB47555F275552E6382
+:105DF000EB229C9FE8B4A2306E65295BE71CC2DEF3
+:105E000017E1391D7F2E5F4FA5FA2296739B6D8691
+:105E1000F1B716EDE884F9E417CB0A9E1321ECBE26
+:105E2000C35CBEAEDC46F6BDDCE217115EA44E37A5
+:105E30005F8CABEAEA94AF4EFF9632165C0A00071D
+:105E4000D8E8B8277F2CE37E4EE126E3BA4EAF1E9A
+:105E5000B6BD95B67FF4B08CFBDE7B45FFF13CF41C
+:105E6000476585C91FFFBB53404ECF6DF4831CDFD0
+:105E700053CEE07FFA6612017A187224980EF01E53
+:105E80007224C4CB5ADC4FA700117AE41E9D1F7503
+:105E9000999A059097B1C1CFCE033950C6EE231F12
+:105EA000A49F379D5F46735605E4436596A557C882
+:105EB00078B5ABA9FDC863D345683FFCD8BDF09D5C
+:105EC0006CA25B0F6D973D83D97996C3B415FAD553
+:105ED0009D7A10F0D1CACFB90E8199A5637918CAFD
+:105EE0000CCADF2DE9304F894C2889CB839D0F8F59
+:105EF0001D0D7205539E4AB08C9292DE7243D77F7D
+:105F000038EFAF0A09FAB93D8AC13FDFF9F0F5C3AE
+:105F1000C18F5F0776622ADCC7E6FD12F27454BFB8
+:105F200088705F678DDA8B697D15B51BC17E595FFF
+:105F3000F4BE087CB76E1FF1037D6404FFCBA6C7D7
+:105F4000E30D6EF6FB3C924C5A80FF0F0E3F350975
+:105F5000F0143940ED4EDABFE237AEC79C600FFD5A
+:105F60009EE5C1B4FFB616F5F7FDB972C2FB78C95C
+:105F700025EC4473FFF421D3319E97B76903DEEF1C
+:105F8000593D49F2DF407B676E2A2F073B46095295
+:105F9000EAEA4FE7BD65F4726042650ADB2F5326DB
+:105FA000B1E7CA0456B6D41F7908FCF6F02E29A52D
+:105FB00090CE77C46A76AF584BF117F610B54B4BBD
+:105FC000CB9FB7DF4C9F7F5C4AB5207DFEF1B55F6C
+:105FD000A4C0FECE93A5151900CF7DCD46BB8EC0C3
+:105FE0006557D41F1A690B07DC745EADEF1184A7E7
+:105FF000C5166DABA475CB4B2EB0707AF939AB5B7F
+:10600000DB67009DCE2992316C6F5EEFFB5C9FCC0D
+:10601000AEEB9E04F7EBE7AB84C5F7C38FA2509EAF
+:10602000CB4546BEDA8942C7BD89F9276129F03AD6
+:10603000C8E570714886573479D63AA4F22990673A
+:106040007FE2761DA99D87E7C890FF2D600F7597A9
+:1060500027F29B4A5D0EEC7F7ACB2D1F409C7A4E37
+:106060001DB3F7F3B67C29203EA8DD974DC7CF2B93
+:10607000C5AB06C99C6561FB48C04FA1481405E645
+:10608000D341C04F0853FDA3878336EE7FF7FD252C
+:106090006E1BF26129D8CEBAF5B8F87A72FD743D5C
+:1060A00009F47409FFEE8F9EF8F2C03880FF32E6E3
+:1060B00022E5854F0876DD3CF2D4CB9BC755301ED8
+:1060C000D8AF6E2F8EEB2EEDC2FB5CCCF21DCC79DF
+:1060D000E0DBADCE73A3997F6F94A7BDEA9CAECCF5
+:1060E000CF734DF26AA4ADE346C4EF1E76EF35647C
+:1060F000C442BB404485DDFB19D1EEA7AE857E23AB
+:10610000DC2E2FD041EBF0F74B003E6BB9BD30B722
+:1061100098A0BF3A37A713ED85D98DDC5E90FC4D72
+:1061200020649D5BD2C81A9DFD80A612B8D08DDC7C
+:106130005ED0F43FD7DBD5BECE66D4AB8DECBC5F72
+:106140008F9DA132BD9AE7637ABDBA997E47E1C4BB
+:106150003C566F97303DAE6CE2F603D7C319FCBBDB
+:1061600099CD4C5F65801DE181340815F532EE61F3
+:1061700065C5ED967EC54C5F66B4EE45BDD6013F64
+:106180002E3306E406D39783DE3EAA02987CF47190
+:106190001B95D38FF3769F97DA67E971FB6C95C8EF
+:1061A000F79B08B30F31E79FCEF321E8AFB31B771E
+:1061B000F0F9ED3D9C7E13C8D79DE1023C57AEF14E
+:1061C0002D463F693DB794E5AFE4D6B17D72B7BFC8
+:1061D000EA29FDF9B3796E76EFD03C8DAEEAA23EA6
+:1061E0001817EF8540392E637C7135B59730FEC4A2
+:1061F000FDAB6B5C3CAEC1E927993ED1E4909B04BA
+:106200003CC514BE1F479E4279AD527F09D6F67138
+:10621000B861C0DDC0EFE169A530FF75E3BEC2FC27
+:106220008FBC24FEE29F353FF35BCA75F7A4A3CC75
+:106230000FED14139EEFC9F1B0F84387449C00CFD3
+:106240009430BB472EA54C4ED83FD5C3ECECCF398C
+:10625000DCD68D7B0ACF6726D5CF12512D09F4A944
+:10626000A66F5B01CFD7D0FEEE379A54F4D323410B
+:106270000BCA57767E314CBAD08F548B648C1BB6C8
+:106280005AC376C0C7FA528E57AFBD1DEEB7F9D6C6
+:1062900078A1F0003CAF0E8811211FF01CF18E6434
+:1062A000711D3CB77C9AFAEFFAFD8AE11E91C34951
+:1062B000C11FE6CB6B66F4B56E9C8CF358333AABDA
+:1062C000DD92AF97BF02979FEC9CD89A71AF237D68
+:1062D0005DEEFCAAEA9EC57B3FB4E7A7363F5D00B2
+:1062E000708EDF7F11E8F33C4555DDDF36ED48B0B9
+:1062F0004FD0D30E7E940BFCC0C81D867D4D8EDF23
+:10630000091ED1107703F96A45E7223200E24B7B80
+:10631000C6473CF01E59C6F66DE7F37DDBCF77DC50
+:1063200082E7C94752B2B226C0FB67F5C6F3EA9FBF
+:10633000ED7C7A008B6B440C79C2F39FFAF908C3A9
+:10634000FE7080289963F915ACC0EFAFFB559B2513
+:106350007EFF800CBF57007176E0E0C170AB620732
+:10636000962EE05F5A7A4837965E504783C14FF2C7
+:10637000639949825866915A2C7D248CE500D2811C
+:10638000650EF8B983412F7463A910AF487472BFCA
+:1063900080F8B15E4882584A80B78CF8BE84B4CB8E
+:1063A0008EF91BB07F017C9FECDC99DF53B9C4836D
+:1063B000FC5D7B25FB1D23B65F31DD13B8C78378F9
+:1063C00088A2FC9ECD45F991E74674C0F9A37BD61F
+:1063D000B2732F9A7C47FF867EE7D974A60FD48DBF
+:1063E00002CAB115CEA9DF4578B65ACFE8F71B88A7
+:1063F000DD5E08BF0FA28D3B9BC71966733D08E1A8
+:106400006E767ED08FE7936643BC41D74E7ADAD959
+:10641000BD34DA38A2F3DAA17DEDF7E9DEC7FCE896
+:106420004A931F7049FD6DAACF31BFFF359D50566D
+:106430003C1EF7EC77955CA457AEBF294129F85E66
+:10644000B3ED04FA63E189013D5C9EE17CA0E9952E
+:1064500039A67C0F733947E2FC611A876AC0343869
+:10646000D78B774AE8F85BBB9F54BBBF677E20247D
+:1064700067B3D77C80472F9F77986CA9C8A6E5A7FC
+:1064800050D7C5F78FA6865EF2E8FC116FA056D4F0
+:10649000DF77B390F3E3444B6B39C8B9D321E207FC
+:1064A0003F623EA9F57C07E2F9472D28E706D2793D
+:1064B000CBF07B2FB0C1918E75157EEFE56C3D3B27
+:1064C00027748ADF33FC14DC4743CBBFF07B85475E
+:1064D000B62D9D0A74F039BF5FB868DFEA20C47D2D
+:1064E0004676386781DE1FD931BE1ADA47EEB2B17F
+:1064F000DFF1E172429B171C7377A4E33976D59ED6
+:106500000EF284A0DE3DDBEA88C0EFFF9CEDB0B068
+:106510007B558B45BCBF0CAE21B4F0F9A5A6C3F7E3
+:10652000FEF387608F7CCEE5C9194F1AC397A40A82
+:106530006A26A4A5103FD8351B9C8BF01C64952BB4
+:10654000F2D46399901F6EF7AFA0DF3FB0F7A55C60
+:1065500078FEA87311967FD9FC412EC8ADB3FB3FDE
+:106560009013D16D8D1495213EB5609F20C2FE49D8
+:1065700079C72C19F647AA761FC0B8728D3784EDFB
+:106580000BDBF6627DC2EEB771FF6470AA82F33A4C
+:106590009B1DC2386F619B2D0ABFC7B1A7207C77B6
+:1065A000C27DFB54A66736385FC5F11F75BEFA3A47
+:1065B000C265B30DCF7F1CD8FC1B1CF7CCFE97F82F
+:1065C0007C09E60B9E4DE938FE13D05F7BF9794CD0
+:1065D0007BA7471F0F965205837C3DEBE6FB5E3998
+:1065E00097E8C7F30589ABD3C3E452A707F6CDAA52
+:1065F0003A181CFE628DCA60472EE81014F83DBDA3
+:10660000F2DDED781E70C13E3B9E975800F000B859
+:106610005178215CDA0EE0FC0B002EFD601DEF626C
+:106620003E7EE13E0A9751F1752F7085905FB5F57A
+:106630005238B075EFB9149E42463CB5BD2D435C4F
+:1066400066E13E01E1B770379B47D53E36AF09BBE7
+:106650006721FECFEC270AC45B4EEDFDE07358CFF7
+:10666000D9FD76BCCF579B17DCB7E02901FE6174DA
+:106670004AF631B9AAD9DD35912CFCDD819EF6DDD3
+:10668000EC7749016429945E47EE9B86FB82A54026
+:10669000BCC0FFDE8E11ECF705C3B900D73DE3A304
+:1066A000B930EF33DAEF2349E15CC08BDF132A4DB9
+:1066B000D5E1E3B3132FA15E2C126BFFFC20F0F1A8
+:1066C000F3EC7738967EB841D4C3E33AF841AA3167
+:1066D00000B7B73C08B79EFB5BC22C5F8A84901F53
+:1066E000AB383F9E6DA77E275DFF676D2F60FBD99E
+:1066F0006C637ED55FDA0EA503DC2AF9790C12B93A
+:1067000005E511854BB33D819EEF39D71661E7153D
+:10671000CF09FC3ECD2734B8D5CAD30DFB7C4C1E27
+:10672000E66CC93F8C7E4624F13947B39D64BE2F89
+:1067300035593EC0492ECF3EE6F774697A77BA27BD
+:10674000342BB55FF2F3DE952D35B900EF4A381BD7
+:1067500089F79C1EB801E215786E88DD931A05F85A
+:106760009CEAB907F5A51B20CFF4541AABD7A57640
+:10677000AE02BBF69476AFAAFA1A7B3F9FB56F8242
+:1067800076DAFF394FB03695D9F702FB7D1F6B1AC9
+:10679000FC4E83A63792C3C1F83B0D4FD3B5025CC4
+:1067A000E8783FC1F1243ADEC87F7E3C4D4EFFD3EE
+:1067B000E3D8FF67C7D1F417F027A43E12BF7FC408
+:1067C000FF04FCFEBBEF93F05C035F5DD83CB809AF
+:1067D000F6D1CEFBD83D30B6D6E504F4F9DC4D1B3E
+:1067E00012FEFE5B4F9DE7E5C88329BFE9F8FA4832
+:1067F0002AB3CB8F70390D7FB0BF0577E5A05D4C14
+:10680000FF5AB3307509FDE761FC1EF3221246FB07
+:106810007404E9C0B2987462398A746389DBCC83EA
+:106820002154EAC7F2AFE55D6361F10BEDA1275397
+:1068300044CC3B780DE4D0D941A1A7E1A2B615CE56
+:1068400045D7C0FCDF48F57278450DBFB742F4BFAD
+:1068500087A1803D38C5D7973D48BCD2999EBC974B
+:1068600002BCCFF6ED545C5FB2DF515B62BAF786D3
+:106870009D0BD7E050433A308FE4B52DF7BC319CE7
+:10688000C2FFEEDD6EB493876E695C02F2FC6ED2DD
+:106890009905E78487F27B44481BBB0F47BB1F6405
+:1068A000789BCDF83BC2A6DFE359C07F3F6B81F9EF
+:1068B000F7A9F839DC167890201FC37C8EF7AFA9B2
+:1068C00089EF7D21C5897F0FC57C8E77778788F911
+:1068D00051F740DE95CEBF18BEA3D666A42FE5DFE4
+:1068E0000AADBABAE067F108B723B053E8FD9DFFDF
+:1068F0000B82D8B2B4008000000000001F8B08009B
+:1069000000000000000BDD7D0B7854D5B5F03E3360
+:10691000679E99849964924CDE131E21C86B0221F4
+:1069200045A47A122246A43A3C6AC15A9C8040800F
+:10693000BCA068B1C59F8144081425D488400107D4
+:1069400044C5FAE8A417E561B00344448BBDA15ADD
+:106950002F522F1D901F1111466DD1F66AFDD75A87
+:106960007BEF6466480AF4FADDFFFFFEF4B3877D2F
+:10697000F63EFBB1F67AAFB5F70C77288CA532F668
+:1069800082A2DCE31DC4D837F87753D773AA5DC75A
+:10699000D808067F8D6C5C31630DD5AA7D15941ADD
+:1069A00002564DEF84A75D1750F219CB4A2C33CF16
+:1069B000853273E8ECFDDC8C8DD58F3EEC86F6C617
+:1069C0001A75B809CAEDDBE67618F07B97CA4C3029
+:1069D000649603FA8532CBD005FA41B9D1FE1BC7C4
+:1069E0000C18BFC006EFA19F1C3B0BB8A1DFFD5BDD
+:1069F000EFD761B9A19EB1741C47F175B8E93B9519
+:106A00003D85D362DAF8A234C6F2F09F308ECA56C2
+:106A10007FAA4F62ACBCE6B4256C83F7E1CAF16C87
+:106A20000863A5F67C5AA7FAFEAD1F6179CBA25385
+:106A30000E1F8CF7C6D6E57F180BFD1902302FE824
+:106A4000A2F0EB86E36361BCC85623DBC6BAE090D4
+:106A5000BB583D1536D380EC1BF82F7B616CD9C831
+:106A6000A05C28CAF9388FA87A280F17E333368537
+:106A700085D2B05ECCD7A93106F364769BF3CC40C7
+:106A8000C66EB22BEC9BDE5DE511A2BCC3D05C668A
+:106A90008579EEF84FC5B314AA0F6C9D9587EBBBB3
+:106AA000B4C7976787752C32270D61BD2EDF3F83F2
+:106AB000DD2DF6CF6FD1B9F019B2305757FB01DB9E
+:106AC000EB4D3EE8A77109F39CEEC79839D06E1DD7
+:106AD00088FB78D8E081227B4861538250AFDA98F6
+:106AE000168471860B7C897F3EB4C4FDBBBE86AE26
+:106AF000711FFA7AD214DCDF48A255DBA65C3E2F68
+:106B0000F99D6A77FB717F0DD9CC9300E3199C1D29
+:106B10009976F86EE02EA3C706201BFBEB41BDC2A1
+:106B200030EEC08353993B91C30BE7AB2E327A4EC4
+:106B3000A730665AE4F4A8C3B19D8DF0F1339B31C0
+:106B40006042F82FFA7933D6376C2D71B9A3F07AF9
+:106B5000F912BB4785796E5A62F6A8B0C0E5627D2E
+:106B6000F1F3CB71E8BC01F8CEA8633EAC5F00FB4B
+:106B700080705C604FA0E77C51DEACFA27E2FC3706
+:106B800003FE2C457C5DC8F1774186398078BEE0F4
+:106B90008D3EE9AC1BBA92CFA797B83C7D611E9B96
+:106BA000164E7731F8B4747EBBE51658FF8244B3B5
+:106BB0001DF1519F54F0F868C4F7370D0CE9AA2174
+:106BC000B1C43D23AA3F7DD24817C243AFF3673219
+:106BD0003B632BECD32AD40CC417FF46E6616C4D03
+:106BE000F3CDBC9CE8CF54A0FEF1E65B7939D5BF6C
+:106BF0005181FA279ABFC7CB39FE4C1D949F699EDD
+:106C0000C0CBFDFC1BB1FCEBE6EFF3F26098432632
+:106C100063BB9AA756F861FC0683678A07C67D1195
+:106C2000E63F08E61F14CF3D76BEAFB2FE37F81E32
+:106C3000E0BD533CE3EB5F16DFEDEEA17EAFA86F46
+:106C4000EBA1FF57C577A11EBE3F20BE6BEFE1FB56
+:106C500043E2BBC33DD4BF29EA8FF4D0FFEFC57731
+:106C60001D3D7CFF07F1DD3B3D7CFFAEF8EE580F8C
+:106C7000F5C745FDFB71FD9F10EDC3E27D7662D344
+:106C8000713FE05D36F02DFC2B4C6C4A46BCDB546A
+:106C90005F4CF8DF3002F07C5017BE672BCC8BE5E1
+:106CA000210E95FA1B82FC189E6F8BFE4BE7F75D59
+:106CB0008378B7E02DBD07F1B041F11CF341FFFE31
+:106CC000F93A0FF2DD056FE8399ECF57032C8ABEE3
+:106CD000DF8E9BFF1631BF4631DFDFD97B13DDE44A
+:106CE0002D7279C64B7E89746F8F2D9B819E3418CF
+:106CF000BFD1C9E54BE1FC32737F941F205F906FD9
+:106D00003E6433864C30FE437695EA1B9D6576AC37
+:106D1000F7DB55923F0F39CBCC3390AFDA80D99562
+:106D2000C07876DE77A35DAD0820FF709453FDD860
+:106D30005F8FB7231F6D64114729AE6F31C815F8F7
+:106D40007E7F7D19BDCF73FCC581FCF968325F572A
+:106D50007BE2214B3EB453EFD391BC28B0AB24C7A8
+:106D60007A2FD605DCD0A4DDBE4087E5271BB9BC51
+:106D700082BFC42218BF2F1F9EEDB8BFE4CD42943E
+:106D8000670FAB1EB79BBF53A3E4415F94574938CD
+:106D90006E728CBCDA5CCC34ECD7EF32079E827E0C
+:106DA000FBAACC9592DC05F73C879ECB17FD780FAC
+:106DB000CAB53ECDB1F229BF294A3E319497B1F20E
+:106DC000295E5EE5D4037F8CFADEE4B2C7942D8E93
+:106DD00044924FC0633CDFC0D00B5A17DC62655D44
+:106DE000FC3A5E1E3508F920F96EC3D7C363E4830D
+:106DF000E4CBF1F2E1CAFCF5ED5BFB131E02B772C6
+:106E00005F99CFBE8D7800F867F029243F98EA7328
+:106E10007913AF0C2F83C16BB7DBAE0C3743EA3B62
+:106E2000A457187C2AF57F995CB9025C653BA3F9ED
+:106E3000C9CDA741AEFDE5FD9F14322099E5001BA9
+:106E4000DAFF545DE0295877F6A2E73663FF5987E9
+:106E5000AC8D0867A36BC6E6465C4FF3E38C013E3E
+:106E6000E9CD1C9F8C196576FC5ED569AEE43E5079
+:106E70007EF6DDBB14C0277D4ABD87C1BE1D7EF1F5
+:106E8000CDE4DB107E6F1988CE4D3AAF9DF5A1E9B8
+:106E900010BEADC8B16E5D4578EC33239CB27798D7
+:106EA000490E30FFF6951A2075036C071B85F553C4
+:106EB000566AB0EE1D4A67F9562C070346DE1E5887
+:106EC00034FE5FAB4E11F54C535DA4778AFADF5464
+:106ED000948F86F6AA7DA00A7267C1DA979A0C3958
+:106EE00058AF93DF6B6C24AC17C7136515F6E7B981
+:106EF0007651EF3FD8540E44D46A94E3333FB66FD3
+:106F0000D5E978D9DFD684FDBF5026BEF73FBD5204
+:106F1000CBA6F9DCA67740D1F17A93EDFAAEF9AEC3
+:106F20004D7EAB6929ACEF1377380996C16AB69EDE
+:106F30004E43F9BC624ABD17E18688EF0599D84BEC
+:106F4000EF263CEDDCB79D13FC59507BF1D0DF936D
+:106F50000641559D3E7C2801E057B3BBDE6C80EFB7
+:106F60004D06AF3F2BBFEBBB9A9D95A4CFD4B51573
+:106F7000D1B39BEF0EABBDFFA5EFCCC6AB18EF9323
+:106F8000D01F6A9F87AA1A7D7D934D4FED19DFFFB1
+:106F9000EED727BFFFE4F93FDC89E35D7087D3C6F6
+:106FA00041EB1521804B37DFC9F6B5BB27D0F3582D
+:106FB00082B6C601EF6703EF227EA5D67BB07DD0F7
+:106FC000DC6CF700A02D86662FCA0D007D4037B21D
+:106FD000EBF90B475F6A1FFF3E9EBE826696321E2C
+:106FE000F978B54A722A68F6270C81F26AB043969E
+:106FF000C2949615BD3B6C10965FB231B44B1AAA81
+:10700000DB5D8390AE3C4686FAEEEAEB831948E7F7
+:107010008D35C629DB117F430B5C33A3F4ADB5C9B5
+:10702000069AC7CAD780EE86C2D3107428F87D3F6F
+:10703000901B0AF2459F19ED1C4B4632F3E7633B68
+:10704000DB6AA4CF95065F4519B6CBD0917CB1F42D
+:107050009B5C5106F370A5EA143DCDA3FCD82C949B
+:107060006F76234A50762279FA6E84D373AAA71ECC
+:10707000E9F0399BCDEE870AE0911AF23FB59F33D4
+:107080008065939ED5A31CCF2A02791EA5C79E10AA
+:10709000FCF384C348FC6EB52538A114FAB12ED098
+:1070A000D9FD30DECA9A751D63619C5FD6BC7C74C5
+:1070B00029BC5F95A6329C87CDA9868C207F0CDFEA
+:1070C0008339C2BC5F58EAB5237F8DA4AA6C1BD458
+:1070D0005BFB1A993B8A5FD90641398A4FA638551E
+:1070E000CD02DF7F95ECFB77078C3BFCAD77CCF8CE
+:1070F000BD6B844E87641354F93E2715C7F6631F92
+:107100001DDB4F72796CBD737C6C7DDAE4D87AD765
+:10711000DDB1E5CC7B63CB5324BE01CFB1813CB65E
+:10712000F22A660D7FBA04E52DC0E73D84BFB54065
+:10713000E741F8586AB69F9D05F559C84FD01E1A09
+:10714000C248EE1EC8FDA91BF5025372BDDB31E833
+:10715000727864E5986FC3FDB2F555ED0CDADBDEAD
+:10716000FFE86BECDFC6A2DAE5237CB488239597B1
+:107170005D309F44FC871BE15DFFE707512E1ED564
+:107180007B10DE59352A8DFFF0647740CFF5091763
+:10719000EA3349A27D927975871EF879D2FB2BE7F5
+:1071A000A3DD1B0FD73456AF205D027E707BBB92F0
+:1071B00091FC58A1635588376823607FA41E01BFE6
+:1071C00098946224389992156137AA3AAC4F13FA11
+:1071D0009331E35E0BD2F1438738FE3F64E4FD74E4
+:1071E000F6E7A64111E519F2C994645D4C3FEBEC5A
+:1071F000A28D28A73A78B9B53DF936A4CB759393FB
+:1072000087219E98D0EE82FE7A659BB501B03ECB79
+:107210001B46BF029DF65259BB01F6B2D5CAEEF12C
+:10722000C23C361CB6FAF5F0DE32F31776D4D38AB8
+:10723000C5BC5B9779DE463E10A954098E96D4668C
+:10724000FBB0417C0D7E981FA203CAC5D27E2DA43F
+:10725000E7594A9B49BE5B8A9A9B114E1BC6EB4875
+:10726000DF48BE5747F86CC9091EED8B7E82993AFC
+:107270003BF6970C82DF089D3C9ADDEC45BF090385
+:1072800098EB4A38AA60BFB442182745C0D5E9DC5C
+:10729000F91305FA49C1FE86F0F608278780D3E87E
+:1072A0006437C1DD29FA4DE90BED87F07E1A4BBA40
+:1072B000FA91FBB8A18205707E725CD94F67FF4CD2
+:1072C0005390AF1A7E0770837D5272CD34B987E632
+:1072D00032B28F5B9779EBB7125DDBC8CF91E9CC07
+:1072E0002E433CCA3CBC71A26E087E67A5710C336C
+:1072F0005900F1385365E61B9351BFF1121CE3E9C5
+:1073000035A3BD7912EAA9725FE2E93743654DFA08
+:10731000E4CBE938C3E92C2B18D20D3DC7D14BC6BD
+:10732000E1C87D88F4F174BD25E14211C28545B7FD
+:10733000D75FB9ACD7078FA29F87A5839C00D0E702
+:10734000C68DC7D83F4C585698CEFD4D1FE4FB0E56
+:10735000E1BF017905C4DA3ACC3EC686743A9F1182
+:107360007E95ED5A7DD7EFA0BF4BFD8C76942B39DF
+:10737000879B3B503EB2DDBEFEB80F9B54DF130926
+:1073800050BFE9583A43BEBDD2C2ED3155E079BC99
+:107390007C592BE8C68D72CEF5AF3FA57E18EC9BCD
+:1073A00036D00EB4B7F617156F9853FF07F52CF6C5
+:1073B00002E959D9ED1D4B6D38FEDAC34D6680AF39
+:1073C000E52DDEBE19CA7E15E1574DFEAC0339B37B
+:1073D000084EEA7113433C1DACD70258667FB230A9
+:1073E000E4BF3B5EBABBCA8DFC276D9C1BF9D0364F
+:1073F00041EF01619FC5AF5F356A3ED427E2DF6F81
+:107400004CD689FDF49EAD847D1CFCA491AD82CA4E
+:1074100042DDF426B4EF222B81FF42ED74BDBBF6B2
+:10742000E751F6ED23D6D26032DA254BCCCC070AF1
+:1074300073F6970AF30171E638FF508AFC279785A7
+:107440001494B3B9F5A0F0225E2DB4325F14BE6778
+:107450007FA952FB47AC5A3079047F6F063E60E04B
+:10746000FF64CF257B59A593F328D45F0CCF5B4FE6
+:1074700022DF60CE72ADD31EE98DF80B721FC6DB22
+:1074800027D66D00181A86C17F365DC834E4F2F63F
+:1074900007049C54B32D84FC52B51D3946FCC5AE7F
+:1074A0009E8F6E87763731B16A467E59840B957F01
+:1074B0006CA77216F05FD330D2FBFD687FFB93B8E8
+:1074C0003DC234CDED4C437A6104E46C336B3243FE
+:1074D0003BC276A0B70CD66121BDB99DB9911ED033
+:1074E000C3762681581643B86E62AC229A0EE453D6
+:1074F000FA25D4457AB2A7061EB4D07C0CF52C60D0
+:10750000417D08E706F05617B2809ADFE5171CE2C6
+:1075100070D37746564FFAEC0B5F9FC8443E6D3DE3
+:1075200004FAD850DC671DF129AB3596FE185B4A8A
+:10753000708A08FCD8BCC44EFBDC69BFF9DE11FBC5
+:107540001C5E8AF222776172CCFECA76D95F663100
+:10755000DFF0E87E03D46F76DF7605FD32D95FE693
+:1075600052FDE625EE2BF4DFBB87FE33088F7AEE63
+:107570003F9BEA3787DE71DC0EA0D814697778DD8F
+:107580005DFA753C9CB317C6F2E5A1BB63CB122E26
+:107590001683E69C0030B7DCA7F36C85FEBE732C27
+:1075A000B65D45FE1FC9FEED6A1F724EC2F6609FB2
+:1075B0006F85B7379C8D6DEF2D7DCD8174DCD59EA9
+:1075C000CFEFA62F63DBC5EF4FFC7C615EA9DF8F99
+:1075D0009AD718B329A67E4AE565F34AFD41D4BC83
+:1075E0006E71C5B6F72DED7E5EB7159AFEE9BC64E7
+:1075F000BB3B465E5DBBF8754CAA30F50077DEFEFE
+:107600000753AEAEDF1F56FDF376F72C8A1FC74F28
+:10761000F8BE40A78D4981FAE9F80AF5459B95F433
+:10762000DECBEC2C219FC6A1E201DF7992B471F888
+:107630005D85A43BE16738FCE275E9C8D7B3841FD8
+:107640009D09BF426BB58BFC0A3ED11EE44923F273
+:107650008BD61DF05D129F57B4FE9452CDED0A3BC0
+:107660008B103D4B7D2999D9156E8F737DA7A7711E
+:10767000E2FB7F18154098EF8C4563D80740872FB1
+:107680001BEDA52ADA675B14D20766946BFA44C037
+:107690008F514D0AF995663CF0F6A3E88FB9FEB418
+:1076A0007B7718DECF08383C386C6D07D3304E90AE
+:1076B000AE9F5FF4203C1F3BC0288E86E5F9886FA3
+:1076C00036CD8DF64625CE08FA396FA82FB223DFC6
+:1076D000FC914D43BE5939597B8FD6FB156825D097
+:1076E0006E265F3ADBD532C188F18ECABBDD2351ED
+:1076F000EFA90C5A347A9A996A857554823E86CFDE
+:107700007423532DF8B432333E4B9671FD2B69A48C
+:10771000D75809E357B63DF357FC6EB61ADACFF5E2
+:10772000C900ADBBB2ED8DBFA1BE3653F31A915F58
+:107730000CDC61E43AA9C087C1C1D832F283E87297
+:107740005128B63CFC706CF9D3140EDF51C28F7512
+:10775000609F89F8F6BC8FADA47FEE05818776B275
+:10776000FF0513C98F31F36CB45F1F9FB36E45BF24
+:10777000DEFEE3566A3FF7390B6FAF0BBE8865FF3D
+:107780008B096467CF4B099624C3BC5FF95A4FF04D
+:10779000C66519B0FF17076C5D85F5C383251817FB
+:1077A0007BF93AC63AB05E0D0CC175BEFC0FEEB760
+:1077B0008E3C6B0A6C837E3FDEF3CC8B3FC3719FA4
+:1077C000CD4A56607F6E40B900ED463D69B6A2BD18
+:1077D00031EAE3E7FB20DF98B7C314B3BE175314B5
+:1077E000A13FB89310EF7AF23B9E5AF90C7D5F7877
+:1077F000F618E1DD5E835F87713CFF4A8E677B2D63
+:10780000DC4FBAD7921BC07DDA97C2E9EA06DDB633
+:107810005FD6A27EF916D7437AEABFD03563737973
+:10782000377EC6CE7A18371FF6F9E247D67BD01FCF
+:10783000D77F7DEC3E0D08C4965F4BE17AC274168B
+:10784000F53E1FE7D37BB90BE7B395D17C0ACFBEDA
+:107850007F573EEAE326AE87C48FFBFB142E3F7FA3
+:10786000F52BE887F3193DD7C3016240D7F3043DF8
+:10787000BCA2703D18FE166601FECF4305A277D765
+:10788000FB7971F390FD2F1570FADC9CB40DE5B90E
+:10789000D3C8F1FEDC92C38F621C53B63BB344D312
+:1078A000CAA3FCCAB3D6CF3F9401FB5FDD9A4A76E8
+:1078B000A67C5FFDECC1B41FC2FBF33B540FAABE14
+:1078C000D5539F7E6414B67B561FC47962BD06FDF6
+:1078D0009F0FBE9684ED666D720C437F89FC7EF629
+:1078E000FA9BB5F2287E7AADF424E9BF5AD8C7BB1B
+:1078F00046768CCD0278CF5BAF78B0D9BCE0F72765
+:107900007D0F759D4D7A0FC6374A54E6D50F23D3A8
+:107910007D323EAB5B5F3A9409F575FB4694E0BA65
+:1079200056E9BCB70D467AD962203F58FCFE189D37
+:107930001C7FE1FB900EBE5F75A7AD0AE322D06FFE
+:107940003B960F146ED3A31F3FE92CF037FEFE9831
+:107950000E78E6D9B6878680CD02786C6B42FAD86D
+:107960008B8E0B1CE7053DC90916E2EB1825FCCFF1
+:10797000F3FEB3C5A8C2F3ECD96549A59CFE689F88
+:1079800090A93B617D554F0E267A9DBD3E96BE6403
+:107990003B39DF3981D8FA78BC28704A7F052B8CB7
+:1079A000C6AFF87629E3FD46A4C7EA45C0CFA3E8F1
+:1079B000A6FA74B311F5AEF871508364725FF58462
+:1079C00097CC4DEBB5F0F582CA6B86F59EC37F71FF
+:1079D000BFB98276FD5C8596C8E65DC7CADD00CF7B
+:1079E000791359053E253F3C3F323804DBEF35849F
+:1079F0009FFE25F1C144E207E7EDA124F42B650ABF
+:107A0000BFDE79772809F9DC4511B7C37A2CCF6D31
+:107A100003790074FDF12746920B4B83079370BFE7
+:107A2000CEBF68D1E9605F3E6E4D29437FD0F9E05B
+:107A3000EF92705DE7822965E8D7EB894FC4F33791
+:107A4000A90F9CC47F5E0F7A8F531BEB44F86290A2
+:107A50002103E44D4A7D517D37742FBF731AEB8BA0
+:107A6000304F23F2239B671B8713C5F33E3B9CB229
+:107A70000DF75BF2D94A85F72FBF9FEABC3ABE5A91
+:107A8000B16A00C5993E63EE5EC8E7EF46DA80F959
+:107A90001DDE5FD00BF50DF9FEC134EF3D4EE8CF92
+:107AA00055D641F901AE71CCD3004D3FD07BEEB736
+:107AB00003FCEF6520FFF059EC3392DFA63195D639
+:107AC0003743652115F07D06CAE72154267D68C637
+:107AD0002625D000EBB977752CBC66B598BAF004B2
+:107AE000FE9BC380B122216E8A6A07FDCF41390C0B
+:107AF000FB30D7CC4209D0EFDCEDB1DFCD63219A6A
+:107B00004FF5F3DF98BADB8FBF8AFD78304D5B8489
+:107B1000FBA14C34D3BC7EFC824272D229FC9591ED
+:107B2000C77A0530AE364FCAFD77F8BED53D50A9AD
+:107B3000DD0BF87771D10CEDDE144A3DD1501F6199
+:107B40002D8984CFF3CA592807E637AF4D090D4E6A
+:107B5000EAEA8FFD46E1761EE3F1CEBFBEC3F7F140
+:107B60002EA13FCD84D7A88FDCA0E3793D910D0AEB
+:107B7000C9D751CF2BFE44E0CF33CD602A229F12CC
+:107B8000EBC6F6BDA03C9BF9094EBF74E6D3FAE6FE
+:107B9000B00E23A7A340431A8C5B7B167813BB1A45
+:107BA0007CB89EF6FD73E6A17DDF82734E457C288E
+:107BB000213C91EF414F6296E4CBBFC7FDD3A2E0D9
+:107BC0005DB529B6CCB647957BE3FE40396ADF6ADE
+:107BD000777E63D2BAD9AFC73AE55B60C084C1D1C2
+:107BE00074C2F5F013623F1FFBFEAC0CE44B6B500C
+:107BF0009FCE141D8C443ECEA49F256486FEADC34B
+:107C0000598CDF05F43D2ABFE2FCD1B8F5D98CAD23
+:107C100033F8287E3143EF3D84A1B6A274DF6F11A3
+:107C20004F66E8B45C95E0AA1590FDBD88E3C3E318
+:107C3000C3EA07D4776377CBF9AF5382211DF2A74C
+:107C40003D5C5F492C8E187C5174FF9EE0BBBD0EDD
+:107C5000840F6521DEBDA4509C6083C21A1580B3D9
+:107C60000BF619E5D306E5E42194671B6E75B306A0
+:107C7000A82FDE3961FE6B64BB5B29CFA86667A9BC
+:107C8000BEC646EBE7FA7342FD561DD4A7DF533854
+:107C90000CE90DD67DCF44787FC2E9A67965D83846
+:107CA000FEB896F9F317A09FF88077FE6B8877836C
+:107CB000ADE48F4B07582526D3B309F562175BAAAD
+:107CC00060BBE5A90ACF83A864537E3388B059ED21
+:107CD00095CC9FC7E0A9A8AC11FDCBE92AE8D9FC57
+:107CE0007D238EF358129F57AA4E7FCF04D4F3877B
+:107CF000F172F26245DB46F26C2DCD2BDDC42A70A9
+:107D0000DDF81EED029886D64AF5018253FA98FAFC
+:107D1000229C477A1FFE741A43D9D8CF914E3CF16A
+:107D2000E9507E2C147AC0C2AD65E9C8EF8F9C374C
+:107D3000ABC8D78FB8A43E1BB2A13ECBFA16F2F661
+:107D400042DE2E2C1A938E44EDCC8D6D77D1A0F5AA
+:107D50001A8E72EBA89EE24F7FB169BD1CD0EE0671
+:107D600023EB36EFAF572ADFD7BA2F151688F26309
+:107D7000D44DB944F642DD976ACCFBF34BCC2C10C2
+:107D8000E5C7A8AE3A3016DBD5B08EE5888F35C191
+:107D9000041688A28F1BACDD8F2BE9A2EE4B3DF3BE
+:107DA000773BAE31F6FD9729CC9FD25DBBB4D8F7B7
+:107DB000B08E98F2EE2F3AD781EFD9C87012FA75CB
+:107DC000C7A37C86F2C580CE6F00BE75C4C0E5EE49
+:107DD000057B38462E5F7087B95C46BF958DCBB367
+:107DE00009B8CF6A24696262D738B21EBF4F8E5A73
+:107DF000EF85294616A2FD89D03C107EFEFE8C6DD3
+:107E00006CFBD488F93AD56DFB097E126FA2E1E8CC
+:107E10008F8E8335748474C033C6A56E5F35680059
+:107E2000A0E001C91F9E5EA58D867ABD2E865F24C7
+:107E30001477F20F62578F61548EF8CD33ABD06F49
+:107E4000DB55E6EDBBBEDF310EEB8B07F1EF27A76D
+:107E50003EFBE6324A6A69E67A971AC9F5264695E4
+:107E6000CD71651B94074795ED71F5CEB87A575CD7
+:107E7000399BB73F9F18CAD57B18BB27F585712A58
+:107E8000F0CDF319A16998C7B6BAE1D7E3CA819FCB
+:107E9000D51473395FDBA678485C09F8D57AB81E2B
+:107EA0006BF3848D983F9750DC7108F94BF56EC5E4
+:107EB000AE003DD882AD212AE377EEA8EF820A7D9D
+:107EC000571D3C49DFF5D87FA18EE87D55E129DEBD
+:107ED0002EF821E9132B1AE753BE808C87EB994FBC
+:107EE000CB52BAE2E192CF5EC8D00E129FDDA7D886
+:107EF000913E3BF114FB8DF243C9F67F1ADCF64745
+:107F0000545712167EBA14F5EBFFACF97004EA9BD5
+:107F10007F12F2649D121880E36E64BE01284F7FC9
+:107F200054D36FBF0EDA9D30843763CC6F4BEA6B4E
+:107F300004BF1389E11CCC0B0C3CF6EFBC9C1ADE91
+:107F40008CF0BCF458C738CCFB3B9113CEC13CC07D
+:107F5000EDA9FFC5CBFDC29BB17CE4B133BC3C387D
+:107F60009CA387EF7BFB3F1C570EDF3F65EF9EAE68
+:107F70001F13FC44CEAFB6AFD69C8A7A5E359743CA
+:107F80009BC1463303DF9C36F7DC0B4F011CA6FD7B
+:107F90003481F8D953E7278DE3F682DFAB96A03F13
+:107FA00099FF919C247EAF929E9181B231B96B3F33
+:107FB00012733BDC2447AEAB6F45FD257DDA209282
+:107FC00023E54EED0B1C573EF767C113DA7F916A2C
+:107FD000E7FC5BAFA3F87AFACF1249CF5B63E1EB22
+:107FE00001BAA1FDB589FDF89558CFAF52B91D7AF8
+:107FF000BFF366EAE72EA1DFB7AC0C3C6B01F81FBC
+:1080000097793B6BB9BDF0C3ADC057808FB738B41B
+:108010000CE4273F147978927FE0FBE4283BA9A584
+:1080200008CAB62E7BB86582966175E2334D8771BA
+:1080300024C98F5AF2F977522EA537F071D3D70C95
+:10804000D886EB4850B93F6CE694826D4B492F9827
+:1080500048F3659A96A1407FA7E7F4D6A19F4CEE1E
+:10806000CF9ABE5A3BAD47C419E43EC9FDFC2295E8
+:10807000DBF733F4A057C03A2DE93EEA0FF48C2128
+:10808000C21F477AC617B8C751F0656A7804BEFFA9
+:10809000FF084E1F7D1B70AA5904FC427715FC4255
+:1080A000C06F9D1232A4737E41F63DBE47B9D3EE38
+:1080B000F47D9D1A95AF33ED6735A457CA7925FC39
+:1080C0006457C50FD8E57416AFF799D2F87E49FD0D
+:1080D000D423FDAA629C13C7CD144739610C12DF6B
+:1080E0003C0176D552E42F220FA0E4A7F38EA07DA9
+:1080F0002AFBAD49D373FFB4DC77C5DB3A2B1FF302
+:108100006298DF8CEB9860A47D9772B7C5C1F35C71
+:108110005A1EC8A23C978B2CCCC83F3B92117F04BF
+:108120003CA0FAC8D434A27F68EFB760FB39D751BE
+:108130007BC00B3FF187A956B2835A306E8EF55340
+:108140000B03989783763CE1DB1C1D8DDB0DBE7025
+:10815000FF777F9EF721F126AD81FB9998AA0D99B3
+:108160001025E76F4DE3FB9C501C7EE93F50AF5D4F
+:108170006D21BD16652CC5A89AD3A91FD8FF6169CA
+:10818000DC4F417876EF238922BFCE5382705D9118
+:10819000C8F1729385C7CF36811E4D7C51E0AFCCBC
+:1081A000EFF3097D2F5CA54B427D414B937633C89D
+:1081B000F512E1BF87FAE961E524DA7FD3FDFA9091
+:1081C00009FDCC4D376BE1283B06FF30FE788FE090
+:1081D000AB6C3D233BEB1EFC2E09FBB72661BCF5C7
+:1081E0001EFC1EEDC8C537C7C41527A671FA96F345
+:1081F0008BE7FB13E5BC9A1FD7A2C791FDC7F70712
+:1082000076EDA4B4548273A817EEEF523DED5FFCF7
+:108210003CC3EBB91F3EBC3E8FF04EF6D7D33CFFBC
+:10822000AC8FDCA7801C9C3586DBFBD2FE9929EC49
+:1082300071B638D6BE43BF4F67597F7939DE5EC409
+:108240007C81D8F65C6F4918143112DDBA9598F923
+:108250004B78F5048707AE116E52EE3D6E013A0081
+:108260007C598F7995805FEB1F482039E6340606EC
+:10827000205E6DC47C1D92A7DC8EFFFC48AC3F26BF
+:108280007EFF7E9E26FD6AD7667F3F8278D18DFD78
+:108290005D678D6C41F8D75919D1E7857D89448F89
+:1082A000AC6F781AE6D15DDC6B62480FB54AB80056
+:1082B000F9E00545ABA4764B13DC4897D2DFF1C15A
+:1082C000CBDCDF51873B03EBADF3FF17E571D5ED59
+:1082D0008EB5CB2FC07F5540471774E112EC4FF29B
+:1082E00017D0CB35D2B7AA787CAB56C7FC68B7DDC0
+:1082F000A09B3E87F38D4CB68DDE9F2C5810A5F7C2
+:1083000043BB762599A323D261B5D8975ADD296A54
+:10831000578DF958B83F68BFA11F102BA3FCD6B5E5
+:10832000AB3FA67CB0DA9DB1F853DD855FCA370A52
+:108330007E17856FC41FFC82BF30EE8F29E7F1F9ED
+:1083400044514EA8E8A0FCB03AE18F493D101E8B85
+:108350007C2AB138C8A6C3B3EE2CD75F46B56D3DB5
+:108360008876BAA3A22307C9AA4EF84125FEC87988
+:108370005EDFB6568F76A4D47BA2ECD8011363FCE3
+:1083800018CBE83BB48B71BC30BECA40F4E2F27249
+:108390009D9097096860A35C6DEE4F7215E51EF223
+:1083A0003B695723FF43FC2A4A2F3B8EF4FF467A52
+:1083B000D91F399F04BC453B018DB4EB7BC63F09F7
+:1083C0001FD90EEDEB7FEE9F147C9C71BFE48237CA
+:1083D00052FF291D9CEFE4AF57F44BA623BE2F504C
+:1083E000DCE988EF17057F3CBCBF80E2A0F2FD19F5
+:1083F000BD8FFC8FD2FF3507FD7EF0AC16FC689672
+:10840000F097CD927EB2F5B1F15AF4534797E74A0F
+:10841000BFD90E53571E13FAA9CA592811FAAB41F6
+:10842000BF1B3E83B1DFD5B2087D57B7FB1B534C52
+:108430003CB885C3F11E814F8EF2801EF9D8060B21
+:10844000F79F49FE366AF156C2935EC3B4FC87902B
+:108450006EDE3090FFE57F0B3C90707930ADECCF55
+:10846000B8AF56BDF00F3E6422BE7E1AF48556E1C9
+:10847000F7998876F212A6E13901A6DA73A3ED68BE
+:10848000F95CB5D75285F89899AE8BC1D7F634030D
+:1084900095C91F46722381F402607343105F4B7AC3
+:1084A0004BB9CD86A01FEEA4B0EB6BEFB4F9B0BF13
+:1084B000B08EF3C5FEE97C9FFBA7F3BC5959EEB41F
+:1084C00043053ECA382BFAA5A2E314433ADBAF15A5
+:1084D000FA2EA3F5AE9B23F2E83BE942477C2E61DE
+:1084E0009097E4C30DBA32E273918F6C6E844BC5E2
+:1084F000C7D573701D9F4DB1D279C97B859FFCC6CE
+:10850000749E8726FDDBD7EA272F4DEFC4C7183F9F
+:10851000F95EC117F7323E5FFF592BF7F7AACC8FF0
+:108520007C726F704000E75B29FC23A87F21BF8E1F
+:10853000BCC4F791A95C5FDBDB3638807474D2E091
+:10854000DB3013FD4DAD06F21B3235F0ECD3D8CF46
+:10855000AB191ECCB3BAA08B6CF93DB4DB7BF657DC
+:10856000591857DB2BE21BD5C65001E9F522AFB4F1
+:108570003A2954807EAA57C47E555BA10CEF532C38
+:10858000BEBBD253BBE28FF81DBE3F15E076C329B8
+:10859000C6F1C0BF9AC79701BE193371BE2BD3294C
+:1085A0007E89FB82FBF0C1BEC1B4AE7506D17E0FE1
+:1085B000F7732B130BA7919C59654A41F85FF41A86
+:1085C000292FBA6E0DD76B67E8DC5B1621EF7D357E
+:1085D00081D637B3E528C595EA1E994DE74DEBE600
+:1085E0002EBE9DFD93780BCAA968FFFE0516C9250E
+:1085F0007BBDAA773004F3B8D036C0C3C3A5FCFC5A
+:1086000052ADC8BF3D6D601ACE3BB2CF10E8EE5CF4
+:10861000654FFD9383B384CB4B1CA72E3AAE45F236
+:108620002536CE75A5F20543B8E001187F758A6F2F
+:1086300075BAD03B115E75AF66101FFDE0E12F7279
+:1086400049EF69E6F194D3066D1AD289A33C649C84
+:108650001EC55FB70B3A9E6112FA2DF0C168BA973A
+:10866000F52565B174269F4F0A7A4B14791897D770
+:10867000CB3CBF492694C7DCF585FDBAF9393411E6
+:10868000DF1C7536B21FF3D9AA8345143FCD5B1C9E
+:1086900022BA047887D03E39BD2191F3135826F6CB
+:1086A000336B2423FD7A969EE795CC3281BECEF5BE
+:1086B000026A7F66433AC1A16419D753232F29C4A4
+:1086C00017659CB792F1EF77359EF4EBA17DE50E2F
+:1086D000A508582BAB6C2CA5BC93B99BF269FF473E
+:1086E00009FE3BC3A4156C407CDBC5E384301ED976
+:1086F00005D5985B378CF89211E56BD50E85E22590
+:1087000072FDF1715516888D478D0A72FE8D728348
+:1087100045E993520EA1BC60717A6E2C5EF8AF4AA7
+:108720009EC6CB8377D3AF56AF8C95A7EF21FF4A78
+:10873000BD5C9E82DD701CF1B0A48CD371A495C782
+:108740009F6A583D8FC30979D6B92E210FCFE8B95A
+:10875000FC9D655A4BCF8BE93C0E359785451C2A0D
+:1087600062C4F9F5845F17D3657E7B2C7E49BC8A91
+:10877000209E417FD56759E8BB305EF56216AA1985
+:10878000C29F894348BE73396FE6721E9FD6AB9075
+:10879000F7F1723E5EAEC7CB73146728B7253E452E
+:1087A000C723504F1AB538A0E7FEE66C3BE665CA12
+:1087B000FDBDDFA939B253BBF4C0BA6366B37B28F1
+:1087C00096BDACB70DFD68A59B73A0BE4EE5E7C393
+:1087D00013004E5BE1FD666187ACCAE174E612F9F5
+:1087E0005706D5CB8A6CB84F1DE43788A432CAA788
+:1087F00097F0DD9C08DF613E420EC78FCEEFCDAC17
+:10880000D11AF57DD95E0BC9A94B7B12E91C205307
+:108810007D790EE82FED4F603F40F9C2DE44D21360
+:108820002E08B9E194FE19B69CF6A38F8BEFB39F87
+:108830009565A19F9B29E3B2189D8FE7FA6C8DA3E4
+:10884000A7F884A8CFEFB893E39989E4F52547F812
+:108850007E2CC37C28BF3BCBC5F7BD6EE798A29F9B
+:10886000615E86D7E6E150F515A1FE61D22FBCD33B
+:10887000ACC77B1216471E8075D4E4D8286FBC3C69
+:10888000EFFD77A742F9A39D063A5F3AE7A949BDF4
+:1088900042F899AAB9BAA393390143CCB9C5793B37
+:1088A00062CB35C1D8725DDC3D058BDEDFFA667BBD
+:1088B000547DB94B9CEB74330FE6BD33FDDDBD7CBD
+:1088C000DDF05DF9FC6249E0CDF67E9437789B8B54
+:1088D000D3B311F5A3E9880FDD7CA773F17D35993A
+:1088E000EACFE2F903D32B26BACF20DDE59BEC4A91
+:1088F000453B2A7208F7D394777E08CAD3B2BCAF3F
+:10890000286E78E941E641F85CB294929E746983DE
+:10891000C58D76634BAE8DF0A0E55525A070BB628A
+:10892000FC08E0AF55341558EFFA5B3FE2876598D5
+:1089300099DF7F0056950BF9954676DE990956FB2F
+:1089400032F8AE6A3D97DBD5AC2309F9C006B97F92
+:10895000FAE78D66F8677EA3366029CC779ED74A02
+:10896000E7A4D4AF55BA1F600576196597D4BB3814
+:108970003FA831878DA538FE570B2BD00528FD79F0
+:1089800026834FC3F37886DD45A12C78357BD14112
+:10899000B2BF3AE3F6FB38DF9AFDC07E7AAF4CAC4B
+:1089A000A0F59E81F5225C0E6E30D17ACFE4D8C856
+:1089B000FE3DB399DBF9B3EDC68099F4962F53F0E1
+:1089C0001CF399CD06BA3FE07278DC42E7893FDCC0
+:1089D000F43AF91B3F647C5CFF4E3DE93D1FDA230E
+:1089E000252184A3BB3E09F5E6AAF573E83CF2EC29
+:1089F000CD7A2FF2B3D99BEFFBFDF5E8279B785793
+:108A0000312EE926C7C234B7ADAB5EEABB6AF2C805
+:108A1000A7910E6FFA7A4CC74DA8776D063AC9E751
+:108A2000E71D50DF6FDF7C0BE9B7B327581DB82E69
+:108A3000F7A6A7C6A21CFA7042269D9F9EFD82C281
+:108A4000F0CA8CD98E4569F87EB6A27ABBC3A7A1BD
+:108A50002E7EEEB934CFE609E1777FD4139E005D18
+:108A6000DD8972B866B381F4E7F689C7DF9DEAEC69
+:108A7000A22B65E2FADB4761FB670CD4BE536FDAC9
+:108A8000F43D892F2C5482F619875B3C9D99F21690
+:108A900017E0BCE2E96DF6B2FA021EA7BB36BA6374
+:108AA0009B38DDFD9B4BDCFF71F574B7D7957AF5EC
+:108AB00074C7B29363E4F0E5FCCD4FF094710EB34C
+:108AC00087694FD928AEAD29C07F3FC080FE087CA2
+:108AD000F27362EADF16EC780BF1D8E53B82F3C85B
+:108AE000635A11CA4D77C45E8667C06C422F649B7F
+:108AF0004CD29E203B615D2A7B7A55945FE4CFA2E5
+:108B00003FE0037FC47E2EBCF7D521DCA7DADCF37F
+:108B100043D0BF5DF7E55F282E6A6BE371759B2735
+:108B200042F90606A797F050F2F73A0F973FF1EB9C
+:108B30002AC8E0F6619D3342FDE833DD546E1171C1
+:108B4000A48D8BACE437DEE80C58B8DFC3CF503EC1
+:108B50008D1FA9E7F140A1B77D4FF85DCDC507197D
+:108B6000C601D9689E8FF756F1413505CABF1F79F6
+:108B7000B387CE51163FD9D41BD73DDA20EAFBD0BC
+:108B80003D27FFAE9552FD0297DE8DF43DBE98E77E
+:108B9000A3B2AA24F2E7BC55FC81F3DEA8F97B99C5
+:108BA000D96D03BC9908C41A9DFF78FB688BDB164E
+:108BB000853F9F352B155C7F76F79A3C98FB6B4879
+:108BC0001E17C7C26381CB48E3BE915ECA3200CE96
+:108BD00037DDC8F7E3DC0BA600F2C173E25C523C60
+:108BE000FC7A6508FC5107C4E427388DC15C949376
+:108BF0001F2BB1DFCD6DD2537EC09C26850560BC96
+:108C000073CFEECA457EFED153BB72A747CD27FE78
+:108C10003BF9CCC888F57FC6FBB37BF263CB7617F4
+:108C2000D7339FB94F57FB8B557F273FF6F436E17B
+:108C300007D7B4BE4EB4AB44FBF8FECA057E28BBD2
+:108C400015F29F483FEEA9C34F62C4A873FF2C6D75
+:108C5000F9BAE83C52F91C25F66D12EE1B2CC5D270
+:108C6000C4CB3DED574FF47842C821B96FA79AFAAB
+:108C7000F442381A6B6D2AE3E7030B51EFDFCCACFB
+:108C80001EA4A72F443EB1D30A4FD0D38C992E1BDC
+:108C9000F233791FC34FAC49DBF0F985C837765AF8
+:108CA000E109FDE46416527F5FE8BC641FFE44DF07
+:108CB0004CE7466FC9E0704867214541563BEF6578
+:108CC00085F2E49A62E19DD6C0E548A4D248F24B11
+:108CD000C2FD86E9F7931DDCCD7EAD473CCA1CC9B9
+:108CE000DFF933F2851E1DA678896524B3A39FA002
+:108CF000E17A3FCD43EE571D6FCE943685F467CCB5
+:108D0000F34948A6B8B05F3C992D9975C6491284BD
+:108D1000DDCCE2E222E9A077633B394F2853BED095
+:108D20001A47B0B980C795492FC57EF1FDF4412A95
+:108D3000C515B09D71D895F1AF134F453EE878F950
+:108D4000BECADA6D1C663C9ECBC27D00F9887A21D2
+:108D5000F31862CE656D027D1AED3D19E7D6EB8200
+:108D6000452EB24F3AC2E887319698DD286F13F44A
+:108D7000C142DCBFF8B837B4CBE7F916D90E94334B
+:108D8000F2DC55EDA2315E8CC781FEE137E3FE4D8A
+:108D9000E0FB57FB4029BD5726162E45FCAA5BCCAD
+:108DA000E87E88316DAD940F5657C1F5B1BADD2715
+:108DB0008D0CF077BAF00B31E1174F13FB7A4AE8CC
+:108DC000DF5D71BDF016CCB76F99934DE7ACE3F35F
+:108DD00067AE35AE7B31110032342A5ED7CBCCE59D
+:108DE0008CD87F49DF327E9738C89B8F9AB861BD97
+:108DF000E98875C4B5E4C7841F2ECFFE27F931FE7C
+:108E0000FADB313FC68C5ABEA8C769801CED3C47CF
+:108E10006971537CAFB31EEFBF30EF56C47839B7DA
+:108E2000DFAC529EAF289F5A8D7EB1351616335E49
+:108E3000F4FCD4B8FE0DD0BFCD2DDBEBC6637F8F25
+:108E40000D13657FE56ACC075A6388ED8F50509EFD
+:108E5000FB34778DB7393BF8F0EAD15DF21CE4FBC7
+:108E600061941752AEAF383EBE79A81BE9EB73CAC6
+:108E70009B96F2B9CEC9F365E2F9D8DB829F835E97
+:108E80003C1645EE8A29F3E9BE88CE38775BA58685
+:108E9000FAB08C73D72DF652FE34E803FF9141FAF5
+:108EA000C0F933FB19EA9DE7C82EA8FB52E5FE2660
+:108EB000D02BF0FE1F735B29F955319DB75FD4FEAF
+:108EC000CF15720A7578A487BA4D3F784A0FF543DB
+:108ED00033B530F56BE8FEFEAFBF65703DBEAEB09A
+:108EE0006C03F203B65DA1FBB756157E467A47EDDB
+:108EF0009E9B4744E7FFCFD9FD18CF1FDF61E8767F
+:108F0000FD7FCBE07A6AED9E97C86F7A2EC08F2DD9
+:108F100055A98195A8875655E950F362C581CAA91C
+:108F2000A40F4C8175C0BAFE9CC1E153B763921F78
+:108F3000CF23D4C17F0ABCDAE89D4576C1C6296635
+:108F40001BC697EA0AA7CF27FCB75B355C7FFC3CC2
+:108F5000BBE2E9563A37BE6AB7A102F5A812D09B28
+:108F6000FE0DE69B933CAEC2037C294BDF5AF463B3
+:108F70001BE617742F97B764713DA051F1FAEF28E3
+:108F8000267F298BCE57CADBCDF5337BA631C63F72
+:108F90006FCFE4F74C8DF6778C419C7B550D27A065
+:108FA0009E5CC7B44FD1FE655E9B9BFCC48CE713EF
+:108FB0003897B8C94F6C76867F3E94F42895E2E9DD
+:108FC000D2BEB8B087FBD79665FA7232D13FA80FF0
+:108FD0003F7A07C2EDE7AAF037733E933BC9360CE0
+:108FE000FD611667F8D10A37E519915FA2D7771BA3
+:108FF000691F5E75323BC2678CBF5255A2E48CE498
+:109000001B633ACF4D39C90F5BC6D91AEB07BB7545
+:10901000C64C28DAF84D4A979E70F8ABC92ABE9420
+:10902000FA83CEEC233BA77C0AD88D8897CB238785
+:1090300074E8F7777690FE581354689C9AC2DF5014
+:109040001EE03C916FD699F7A586290FEE3B990952
+:10905000C28FD9C8F19275905DCC9EE7F007FE44AF
+:10906000F9715D7AFC526A27FB338A78458DF0E30B
+:1090700000A0A8BE2C53FAE19689A7CCE7E3E3321F
+:10908000D55D12ED775837012409CDCB9D84F37D52
+:10909000C4EABD2D13E6750AF017D779AA2981EE27
+:1090A000035BA77468E8D7F417F1BCE1783CF28958
+:1090B000717B1D888C457912D9D353DE30CF13DEF6
+:1090C00030E23ACADB2FDEFDE958C40F56C1881ED4
+:1090D0006B775F5DDEF04CB11FFFCFE40D7B146D4D
+:1090E0001B3CEFCF7470FD4AE60D7BF87EC9786BB0
+:1090F0007CBEF0858C90CAF3FAC25B9E42BB7DB702
+:1091000089F261C6EF7EFD18FA35C79B5990E2CF10
+:1091100071FA43C4396909D2C9C54FCE6C798861E7
+:10912000BEF9CB1E7E1E36561FE8C91EA098499474
+:10913000DDB83653E8E7DF923D20F9759DB0AF3ECC
+:1091400056228F14E0FAF6E9EDDD9D5FDA22C7EFD3
+:1091500029DFA5ADFB7C17E98FAE08E7C7C4BF7652
+:1091600074F6776DF1B4E7507676134F5345FE9A57
+:10917000AA70D6C11C3CBF49C6D3D4D6011427332C
+:1091800075C5D342AC9B789A2AE2532B0C5A25F929
+:1091900069F699DCDC8EF612FF6A6C4DF5207FAB28
+:1091A0009B7BEE453C7AA13AC6BAF09C5FA3807FD8
+:1091B000F5D5C7D3DA33BB89A76D157ADB0785BA36
+:1091C0009011E0BA9571FEEB6F9371351DD9B59191
+:1091D000877368DECA4433CDFB83574DDBD03F3500
+:1091E00043C6CB5EE5FEB519222EF6C1C402F23F9E
+:1091F000F504E7194DB1718777059C2F594AC94F7E
+:109200007FFF2F26907F7E16FAF7FBA07FAB59F8E1
+:10921000EBB99FCFDDC4EF3170EF50E81E59441316
+:109220001DE9A476BA4F761EB0D18DC87AFD80357F
+:10923000DF81D78A4E417DC8DD086550FAD595AAF1
+:10924000DF05EDB61E4B20BFE20AA75BE4E7F1F8AD
+:10925000B57FB512E8C7FBA5FBE3FC8D3A0DFBB962
+:1092600094C9E57C5296B1DBFB281A0D224E22C62A
+:109270005BCA60DFE1A953F87385B89F301E1EB248
+:10928000BF4643BD19FD7B911C7E0FCD25A33685BE
+:10929000FCCEC90574DF5463627D5305AF279ABDC8
+:1092A000648978A9FEBB2A5748993B99F2A83345AF
+:1092B0005E621C9C6736C796E3E347F1E7E36630DE
+:1092C0005FFF8C3E979F1F3B8FFC16FABFB42A5F4F
+:1092D000EC8B87E2288D06F71FF2290ECBEF935A0D
+:1092E0009ACDE1A6CBE1CFDE8E72BA1710E885EBFE
+:1092F000718CCFBFF7779D0AD24BA383E3ED7F77C5
+:10930000DEF1F34DCB2AE07A8D83D36BE34A25C09F
+:10931000E1C5E77DB57E92E2AC6FD74FF281E2798D
+:109320003A944FDF117FF03F6C20BADB6BE1E75ED0
+:1093300025BFA28423B43F85BD7B232AD318573D84
+:10934000BB9CEE85DA58D53B09E3AE6326D9681D90
+:10935000B5AFF273D5358BC3B988D7B565E182FA5D
+:109360006EE08A03A892BF42BBE94EC6EF176A8A35
+:109370008D23C6C78757A768E3B346A0BDF441EB6A
+:10938000EBB8DFAD1692AFB58B234FA3FFC097E2CA
+:109390009B9405F871FE81E36315377D46FAFCC5A1
+:1093A0007DFDE93CE8F4C6D873716C756C7C923530
+:1093B0002593DF9DB5C4BEC7735B31DF5D16AFE497
+:1093C000FACD3AA36F00EA9F37DDC8F3313E99A387
+:1093D00063B8AF9F58F8FEFB1F4E14FCDA53102DF4
+:1093E0000FEA7BDC5F683708F302789EAC6C5F8322
+:1093F000FB0BFB5A2DF6F79397BE5380FB7BBEF514
+:109400003B05B8BFEB0CCD1AD24751BA6F21C2E36E
+:10941000F4CD5ED20F655EF0D5E25DC3B78C77D731
+:109420002A8F9BB3FE35798C7FD17E9357BFD2FBB9
+:109430002D245FF879E22EFFDD39BA57EDE2973A35
+:1094400005F9714FFDE50B3DCF65667ED4C34ACA71
+:10945000C2F45DC9DF750CF541A907C7CFFF4931DB
+:10946000FF9D599A09E5A0F4F75689BECD81CFB981
+:10947000BEBD5D217FAED9ED4F1A45F6D5CCE17A60
+:10948000E22FFF46E742589B62473B65CEF6A55464
+:109490007F61F70CAAD7994321B4C76AA01ECB2BD2
+:1094A00046C7E6791B77F27890B47F611E7AD4D7ED
+:1094B000129C1123E2672DEAD730C55A95FBBD6B8C
+:1094C0009DCCE367A80FC7DA8B32AEBBD1CBEFEDF3
+:1094D000D9D8A6D0FD5D69465F7E36EE6B5C7C77A1
+:1094E0007F96760EF14EC6E71F4CD30E22DD3A8DE5
+:1094F0002C97F2F90CF25C5AECB9CF9EF2E48E761E
+:10950000E2C195F4A8A9A42FFD9579495F7A072FA8
+:10951000CD243DEA4ED2AFE4FBCBF3E40231F1FCC3
+:1095200059E29CEE2C714E17F97E288EEF4797ABCF
+:10953000A3F2E442DDE53B44E5C9457F179D2717CB
+:109540008AE18F9C9FA4EB17501CBD0EE866D1B03A
+:109550002EBCAE66E26F7DE4033A37B4C3447EBAF4
+:109560006A91C75B57758AEC9F3A3C87C4E95BE315
+:10957000E7E9B97E550D7625E5330763F37D95EC74
+:109580006F57FF96ED7AF2C7DBB2A59DC8E95BAED7
+:109590004BAEA3BA4DE1F41837CF787B3ADEAF2E4D
+:1095A000EDE1ABE573EE6F79DDD7CAE706C7C1E140
+:1095B0005FE57397C527FA46923CDF427CE223774A
+:1095C000731ABA28659E74D33E9E273D566FD37892
+:1095D0003C54CFF325E2E3C2EEB114F7947168F383
+:1095E000CBFAC0B27C6AEFC17CB49A7D8994BF503B
+:1095F000E5AE223D3E3E1E3A97B58EC5ADF82B3BFB
+:1096000042E7DEFEBB7908DFCF4E74129F72B3FCD7
+:109610006BCC43B83BFB1AE2A1076D9FA7F8A2F001
+:10962000A56C101804837ACE379B2BF63F41E4AB30
+:1096300098553F73447DDFD3770BB2B93FF1A0C893
+:10964000935A939840F737B88CFC9C874BC7F3B973
+:1096500086667A17E2FCCD6EBE9F4FECF901C373AC
+:109660007B4F1882749F82BFC6E641B928FD58B26D
+:10967000FF76E15FBD5A3A5AF93FCC3F1E957473AD
+:10968000B5F1BCF5008328FA8AA7879EBEEB89BF97
+:109690006CCFF63EC1F1421B427190ABE44B09C561
+:1096A000C0B751EEEF34B9D11E41BF0CC9DBD5199B
+:1096B000D29EE7F742ACC921B9F88985DB27F2DCF5
+:1096C000945CFF2EB9FE6F496FB4A47BF764437FAF
+:1096D000A74B353A27B12291CB97C8B33C1F29FE3F
+:1096E000FC50BC5C91E75FE478BFFBBFCC578F7D3B
+:1096F0004B7C15E42CE91D3DC67D2FFBDECFEFC171
+:1097000029EBD044FE0D9DFB90F3AAEBE0797C673A
+:10971000C5FCE4FB90D07306E7681F215E9D7FCFF8
+:109720006CC6B86A7131E79FB55E1BC5256A833C7C
+:109730005FA77631233F823C273CDBE5FB1CF76FBC
+:10974000C5711BDD5F5BBB7B6B536FCA67F091BE5E
+:1097500078E13DFE3EDDE5FB02DBD52D0EC7C43FC3
+:109760004ABEF97C794531CD97FC004E53ECF9ABFC
+:109770008C1CCE6FE4332D47C217EC1DF8EE7C1520
+:10978000CF3FAF736AF652CA63E0FEF5047707F97C
+:10979000956A77929060940C8BF53FCB26BCA9DD3F
+:1097A000595A44F736042D45740FD19FF8BD5DE733
+:1097B0001FC80CE8B93F3E2967049E3B09DC8A7A42
+:1097C0006B1E8C832AEEF9D65B8BC8DF1847779225
+:1097D000DE3ACFDDFED01C6850BAE8719D81CB49DE
+:1097E00029DFFE91EDE6F110A7C8476C9BC066DA51
+:1097F000BACA36676C9EE6CEAC9BFF81FBF38F6CDA
+:1098000055C4D179DC3EDF0CD66CEFCBF1305FC4B0
+:10981000ED27887C0BE63777E559F4BE72DC5ECE27
+:10982000AF93EF8BB87DC297E27722EC46C28BC430
+:1098300026CE3718E005EAEDA3231D63F0BC5BDFFD
+:1098400096D06884572F043F9EA361E19F0FC5788F
+:10985000488A3A1AE3215B160D3B80715A7565C739
+:1098600077716BDCCDF632345967BBBC37E4107FBF
+:10987000A92F44FC2FFBA381E747AE4C2079DF9250
+:109880005B4DF991178E9B62CE23C53FFD6C990B02
+:10989000FD50BD9BDEA67844E24EA5DBBCD79FE61B
+:1098A000D844FEE43217FAB5129B3AFC23D14FF3A9
+:1098B000B0C2EF0085D92B2EF427A83AD43B66EC32
+:1098C000E6E7E567343BCACCC44F151ECF19ED243B
+:1098D0003EA9AEBC4D87769FBA94D17D7BF373B819
+:1098E0005FBC5F8B5D87FBFEDBAFF5DDC6E97C39D6
+:1098F0003A19573422B86A4C914398DA29E38B32EB
+:10990000CFAEA77BECA53C8AD7672FD363853CEA13
+:10991000D4E7E3F0B8A7EF247E4B7CFEAD81911E27
+:10992000F65BC54CE7DE245E37CAF3075F733F7111
+:109930009EC8DF39B5EABF86F07B02647C26C0EFA3
+:10994000713584976711BCC237FA71DD3B1DBADAF5
+:1099500041E45FABA57E56F27BF2F29AFA2C1B59DA
+:109960008C4F3B53600AA7F6CECB43BAF4031EF4E8
+:10997000EB060F6ECAE17952EACA04DA37752DDDBB
+:1099800010CE54471AED9BFA18DF9FEB73383C65F5
+:109990007C58FA4107E7F8D6603E70E739B545567E
+:1099A0007E4E4D9CAB4E5C74FC053CFFB545F8A368
+:1099B0000FBC3A907EDFE3D24A55413DF592A39227
+:1099C0007ECF6AA3D8D744B583D96DD1F87980F218
+:1099D000747BEFE3F986AA3837AEAE746E4578969D
+:1099E0003B7D948FFCDDC610FD04C6ABF6D314F7A7
+:1099F00003BD88CE079FDBA348BD28461E4ABB2D6A
+:109A0000DE1E7B51F2CDFF213D694F279FBE463BB5
+:109A10008BC5DA9B9DEDA5FD186F4FC47DDF93FECE
+:109A2000C3347F4CDECD11B1EF52BE670ADE28F39E
+:109A3000713ACF89B38005CF714C41A21CD1959763
+:109A4000C444BED27AC5EA417DA9A7BCA4CEBC213C
+:109A5000563F94FB37EBBF834F99D724F3962C984E
+:109A6000BF927279FE8A05F35752F07750F87973F6
+:109A7000997FD26070533E8BFF4146714965620504
+:109A8000F9FF92BD46C2BF8B2CB0017F07C03FD902
+:109A900046E7EAF19C13E27D447151BF632A34D951
+:109AA0005E87ED3BEF93AC64549FDC57CB403DCCDD
+:109AB00002F578CF75E739F399FCDEFDF8FC1599CE
+:109AC0004725E3CA99FD5F56D0CF8A6104CA67F87B
+:109AD000B1F82E9FF7D3F22337F18DB4069E2715E8
+:109AE000B99ED9D1CF5F26F98F39765FD729BE7C51
+:109AF000A4CF75567ECFC266E669D243B93DA7377B
+:109B0000EDE346E6DEAF2386DD4CBFDBF1BC53D38D
+:109B1000E7A676E1939C175BCFD77D11CFAD295D8A
+:109B2000E35D9CF3F75CD4AFCADA4C1C2FE3C6DFCD
+:109B3000D879CF4DC082F2C495CBF1C113A7EFCA3B
+:109B4000A72B5789C9FB93E3F7B43E899F57D2E30C
+:109B500025FEF5846FFE32B14F271248FF90F8764C
+:109B600060C90EBA4FB27D49909E172D4A508FE7BB
+:109B7000872D9169C81973F2B2EEC07B502E26462C
+:109B800072F11E95016EB717EF51B9981A3981E538
+:109B9000EB9FF8BE97EAFB45B6E0BD2A77E41DBB14
+:109BA00083EA713F33192BDA72E40EBF0DCFA9841B
+:109BB0009777A0DC2A8ECB8B89BBFF2141FC0E540A
+:109BC000BACD48FA64BA8813B272A1D763440BCAFB
+:109BD0000D19451417B431F7CE0EACCF36F17B22F8
+:109BE00018E03FD6F7CBE7F9158CAF9B650B7F37B5
+:109BF0000BFBE9771DF31DF47D271FDF6912F12EA2
+:109C00003EFED197785C52E6093366CF417DC8E6C7
+:109C1000663165797F0A53ED39785F4283F4278A8C
+:109C2000F22B09BE49B95172F9E8CD3F1944BF2F53
+:109C3000F3F2CFFA22DFBCC5187B3FB77C26BB39D5
+:109C40009FBC28EEA1BC2FC17777EE08FC7D9969F7
+:109C500063F14AE12929A54607E96FCFEA914FA5AB
+:109C60000AFC704CE6F373947B15FC5D17790F6466
+:109C7000AA4F253F01F3B5E851AEA69EF652FE610C
+:109C8000B539928BBFBFF396D95785F3BC5479F29F
+:109C90007E8A3F661E3D81F922470DCD6392508E2C
+:109CA000E48B7B3830C00BE5435979640F76F2873B
+:109CB0007E0AC547C74FE6E771C7B1A08AFB3CD60D
+:109CC000CECF878D2DCEF734C078E345BEC9D8639B
+:109CD000DE24E46F637F1056F93D2111353ABF430E
+:109CE0003E99CBE08EA6875BDD516586F755C7961A
+:109CF000BFE7892DDF31F2EBFED1E5C18AD680EBDB
+:109D00007C4511F76D007FE1EBE2798CBF12F6DC48
+:109D1000401733E7619EA553F1A3BD30705726C5A8
+:109D20006D768D64544EDB61DE668E5EFF5A1D8F4C
+:109D30006B0BBFBAFC7D2AAC4379FBF27B6904AFA5
+:109D4000341BF05B27711FC2B703826E0F083A2DD8
+:109D5000C9325B91FF1F30B837119E279ADDE8A703
+:109D6000DA9F68A4FB7F1BE6F3DFB75092CCCC08E8
+:109D7000FDEAA7F332B4633742BDBEC44CF92907EC
+:109D800044DE77C3832AF9B9B01EEF41D43F622580
+:109D90007F797952E1DD58AF4F32D2B98BFD8925F9
+:109DA0003E311EFD2EC1F64473087F2723FE1ED6CA
+:109DB000A3382F841BCCEB293E0FA2477D8991F459
+:109DC00070793E1FFAA1789E3ED34CE31D70D8F700
+:109DD00023DE357C449A1ED48F74633E99C4EFF21F
+:109DE000A491F4BB33407D7DA3EFD9D7A779DCFCE8
+:109DF0001C30FF3D95C2CEDF578161A11DBAD51938
+:109E0000D12D8F0FE648B83355C3F6194C96F9F9A2
+:109E1000B5B4CE72A94AF72D29B2BC94CA8F8B7AF9
+:109E2000796F6C6A1EE7534ADBEB7F43BCED9B0402
+:109E300070817DF224747F7EEAB4E0EF97EF5F8952
+:109E40000BFDFE0AAE7350D7FA0F383C2E6F54B993
+:109E50009B7D0920BEC5EFCB018BC78D7EB62BF74E
+:109E6000C7E12AD7A1CFE4F0EC5C474AF7EB48CD35
+:109E7000E3EB088A73E3F1F54A9EEEDB5E67B7F821
+:109E8000F72FAF332D769DDFE23CC3CAB7304F7D4D
+:109E90002ECCCFD6353FFAF9B812E49B1CFFC68909
+:109EA0007C6956189BE7C4467ACC5C5F8CCD6BBA54
+:109EB00045D9D488F2F57111377F5DD0D5A184FFE3
+:109EC000D517F5ADD7A715B413BFEDB5B411894BB0
+:109ED000F267C9FF2F659C2CC132C88101792067C8
+:109EE000EEEF7D741A76DEEE78BC2FCA2BE09BD79E
+:109EF000E58DB87C9E927E3BE70BF48B7424E937AA
+:109F00007EFE928ED8ED414A10DDCC42F474319E33
+:109F10008F0F7A09DD73CFDC395DEB03221F6BAE47
+:109F2000E7EB58EAA779DFE27894F2106FC9F7DD22
+:109F30009407FB3D65E8A774FF147355F6273B4D66
+:109F4000D1B4FF9BF3C58C7F7C2FF5FC78BDFE4A16
+:109F500079E9729EF1FC50CE4799B883F4F83AD073
+:109F6000E379DEBA42FCBEAE4AC7F9F06E85F4FA78
+:109F70005A903328A7E4BDCC3715581BF19ECDBDB0
+:109F800006EE4FF5BF6472C7DE4B159FBF2EEC89FE
+:109F9000C54CDA0BFC7E8B1A3BBF774AC89996FBFF
+:109FA0007ACB7BA9B83C043915732F55A53BF65ED7
+:109FB000AA1EEC05B00B483F63BD74C22EE072BA16
+:109FC000E57AB7DDCFC8FFCC7F2774AA51E88300BC
+:109FD0008BB4AE7BF3C00EA0FB001BF3F2C5BD64D7
+:109FE00001FEBB2C42FF8FF74717A5FB56209ECCE6
+:109FF0001CA4E5E24F04CD30727F33E0DBA60E8671
+:10A000006998F5DBF15ED95B59FD3BBA3E846F0F71
+:10A0100013BE0DFC94DF37DB856F8FE4A572B98426
+:10A0200042E64A741C71FA1EC7715B1CC13FE13DD8
+:10A03000F81BDB4C046F99E71A4FDF51F3396DE0E1
+:10A04000F371EAF5349F27BA9BCFD5E07D345EA546
+:10A05000338EDF3DE13F9E27491CD685FF8315DF08
+:10A060008B386E271D2CE776D765F3D6DB68BFEFFC
+:10A070009CCAE3727509D24ED6C667A4A11F928FFF
+:10A080007FE74A8E177756F2BCA4096D35148763B3
+:10A09000E53CAEE681FFD1EFFC08FE36D9596440BD
+:10A0A000D4FB2BBBDB807ECEC9E363E36F53CCB71D
+:10A0B00050BCEFCEC98698DF39957098227E477DD7
+:10A0C0004ADCEF9BC6C3253E6ED7C90FC47AB3F0F6
+:10A0D000777FE099CDF8399E0CF17B7447F33AE332
+:10A0E0007BFDAF31BE772CEF1AE27BED8608DD3BBE
+:10A0F000F15AEAEC4DF3816EFAFF7210DDDB7F73EB
+:10A10000DA9CED6BA1FCCCC6EBA8FC5ADA0F171E4B
+:10A11000C5FA2D05542ED77D3A0DE9A0B064EA3872
+:10A12000FC9D83760BEFC765F5B5E0EFDFB886F4ED
+:10A130001E86F9C8E5C608B5BB6D68CD70CCAF2AE0
+:10A14000B7F2F291A2FF1846E5DEA23CEC95EBB027
+:10A15000DCAE7C3AADBBF8E0C0422584BF73579EAD
+:10A16000CCDB8F1FF66C26FA8BCACB7879A0A7744C
+:10A17000651FACD77D36AD3B7DC428EC21A95F7B44
+:10A1800005BDEFD24E36E2B944AF4DF1E0F913EF21
+:10A19000C893FC3E3A33CF53F93F722300BD008091
+:10A1A000000000001F8B080000000000000BE57D90
+:10A1B00009789445D270BFF3CE9564924C0E20215D
+:10A1C000102609840492300987288703048C0A38F2
+:10A1D0005C028AF08633E42011748DBBEC6620802B
+:10A1E000E8A28615151574404070118302A206BEC0
+:10A1F000E1505151E3B1AEE82E7FA2ACDC1283AE48
+:10A20000B8EBAE7F55757766DE37C902FBFDDFF32D
+:10A21000ECF7FCF8EC76FAEDABBAAABAAABABABA7D
+:10A22000C7EBC935CFCA626CB847F1F8211DE158B8
+:10A230009268EFC7D858CDDA4F5518733A5296390D
+:10A24000E3198B1E38AC3F7341B99D59582A6337C7
+:10A25000A468E1AE0E8C4DB9E6DBE4289531E62822
+:10A26000ECE98D849405181BC0D838FC13EA8FB331
+:10A270003B026A0EFC9D6F39D790C1E8DFCFD03E1C
+:10A280005BF1385DFD31D725E6EBDE8C61173F5F72
+:10A290004FFD76C0EF53067D9B6CC68F09BCDF0B6C
+:10A2A00016C74A253AD8FF4DA27FE661DDE33B326F
+:10A2B000A688FC4D72BC0CFD78F84F817A9D98F809
+:10A2C000BBEEAD1F15ACB7A25661690005F351BADC
+:10A2D0009ED528084CB6A2A5E3FCACA67A177EEF63
+:10A2E000A6B87B39119E816EBB37BB35DC12BEAE82
+:10A2F00026F890D71A2EFC67867C1293FF14A7B31A
+:10A30000238ECBCBA19D87C506E182F107107E5637
+:10A310007078D62B1594624306ED1688760BE47C94
+:10A32000F7EAE73B209CF9C2008E04E65EA962BB17
+:10A33000F8DC5EFF0AEEF2F0A81CD687B18976EF52
+:10A34000833698C3A4985944E7C9CCB73B06E6FFC7
+:10A3500062845680F0A826DFBE0698D41CE6B1229F
+:10A360005E808E37723A72BA48B88CF86881D388AA
+:10A370001703DC463C04E9539F886922ABA07CCBE1
+:10A38000BC0CF3A9461E047E6DCAB5F937E22066FF
+:10A39000F81FF0F3D1C274FF034A10AEA30ACB300A
+:10A3A000433D9F12EEDE9CC2D80F61307FF81E2F16
+:10A3B000F03068E62FC6B2A8D6F056DA79BD7BC277
+:10A3C000A336627A7D7AF8325334B64FF663FDF8DD
+:10A3D00070487382F0FF60629A1DE0BD47AD25FAB8
+:10A3E00075614D4BCC29413E7BD80593EE8F7C297E
+:10A3F000E7E353904E569332C3EB8039E1BFEB83D2
+:10A40000E9C32E4068078E2F3BC0354370D38C06BE
+:10A41000A55141785D290E5C2F33EC6AC096D39A22
+:10A420005F704676A0D3CCCBF00FAB799C61BBE1DB
+:10A43000765E6F26F68FF5168FF484D69B89E3E05F
+:10A44000B82BE1BB3DF85D01BC27C5B6A60FCC8F8C
+:10A45000E01F5339C27B220EF06515F4BA3792E83B
+:10A4600035E6DE61F45D199FA134C0FC4714B828BD
+:10A470008DEDF7A1996513DDA6D46605E9A876D41C
+:10A480009EC275CACC0DFDC7C1BCDFEBFF5CAE063A
+:10A49000E5C74DAC08EB19F1F75C107F57B48EDAC5
+:10A4A00083FFF508EF36E4FBF34AFD002CCCEFEC1C
+:10A4B000243A32A6A520FD629C29C36210DF3FC169
+:10A4C000B880EF8958047CB0A7A3B613E19DCCBC3B
+:10A4D00023CD30DFD802CDA239683813C2B3D0C93A
+:10A4E000E119A93A886F9BB72B7E1BD4CBF7643E4A
+:10A4F0003E18F2E5472CCC0FE5CD8CF375F33AD539
+:10A50000EF037E9AF7F6CB036005B2AF041FF75C4A
+:10A510006B622E490FF85FA63F9CB93282F9DE5B71
+:10A520006375F9ECDACEBAFA7DF6A6EACA7303BD12
+:10A5300074E57D8FE4E9F2FDEBAFD3D5BFE6B3E17F
+:10A54000BAFCB50D37E9EA0F3A355E971FD2749B16
+:10A55000AE7E7518ACAF3E886E4F7D06E065B6A046
+:10A56000D3F59766EADA9D8D1A7504D7DDEC55F3BD
+:10A5700046E3BA1BC64A74FDB01ACB97C89715F0CC
+:10A580001FD2732EF34607005F2359D39B4980BF28
+:10A59000057EC58D789BB796D793EDE6EFBD7378B2
+:10A5A0000CA67EFDF712660EE6A19FCA3F6D78E706
+:10A5B000704879BEB3D084FC77DE1519FF7504228C
+:10A5C000825DF3B3DA267DDD01A4DF27AADB069FD7
+:10A5D00016BEADD23A58F882E267D06F3AEB118DD1
+:10A5E000F9F2232AF303FD4FB28AC70643FA4395D3
+:10A5F000FF9DC33D82F8B125E8E91CE6D2D339229C
+:10A60000434FE748B79ECED103F5748EF1E8E91CBD
+:10A6100057A0A77307AF9ECE9DA6E8E99CA8E9E9DD
+:10A620009C54A4A773D70A3D9DBB55EAE999E22B38
+:10A63000D6D3CF407F299FD3562ED4D56BE1036F5D
+:10A64000D1684C7BD4FC52D76F895A6A65A6203FEB
+:10A65000F8E03FE4879E8CB90380E705408780AB34
+:10A66000351F14D5AD5E91F46FF041760AD0BF77F7
+:10A6700008FDD569D15A1BF25CA692AEA04FFBA68D
+:10A68000F4273B6800A6537A821D04728379DBB6F7
+:10A6900083A4FC0AB53BCC0382FAAA3DB9D64ACFC3
+:10A6A0008E95FAA91D3DEBEA1A94838090638CDBAA
+:10A6B000018CAD32211C53055F1F0CE77C79118B97
+:10A6C000AE857A506720C0750CE186718E85F73EA5
+:10A6D0008CEBF436566BC1FEA7B17A4AA7B3264A73
+:10A6E00035E624BB622673533A9B79297DCFAE4D64
+:10A6F0004901B9596A6F188076C95F0B3F3CAE209B
+:10A700003047E310D876F12AE5F5C7F827D47B3037
+:10A71000C5AB215EF3EDAEBB1E854F07514FA0FCCC
+:10A720001D1D47F032B3377B7C765BFD2C25F9FE8F
+:10A73000BAA26928777D8976F766985BEF24664F21
+:10A74000443D97E04F1D0FF4294FD1EB975E8227D0
+:10A750005EE85CBB10ED28C6FCB1A81FAE76DC5FDE
+:10A76000A5787E8170CBFA979BAFD55A7B27C2D94B
+:10A7700054E6706F04FEFC44D0E3D95B6D01352ACA
+:10A78000C8479F454C7FB303D0EDEE086D19F1DB50
+:10A79000E41B57605E3918E75A08F05D28047C73A3
+:10A7A000FCAFC4F252BBD6AD234CF17C57AD67343D
+:10A7B000E2DFCBF10F7F647BDB849FC33342E1E3B5
+:10A7C000BF1EA1ADC67E0E9AEA93DD880F73FD0011
+:10A7D000B24B1D1DA89FF3568E97F6F0303CA2EBAE
+:10A7E000349CD76C9BCD8DFB93E10AA7EB89B819FC
+:10A7F000D3CBE1CF39266FC780AA83FB1982DB59FF
+:10A80000D82D11F8E6BC45C06DEF20F0EECAC27538
+:10A81000D51EDCD5D83FDA89BF56FC6827D23FC8A1
+:10A82000BFE28BF13F00799BE9E22713D07EC93666
+:10A83000B93742D1BA70E81AF8FD0381EFF516C8AE
+:10A84000C7D2F795F83D219CB74F78CCE4AF86F698
+:10A85000DEE1AF129D9E5DE0A0F91432971517D985
+:10A860002C615FFF65D8DFF735003DF6A5687B7189
+:10A870001E33E24CC99F101C5A6FB477D8E02BE30B
+:10A880007FB94EC73BF914E608BC4D601E5A77935A
+:10A890009866C1713FFAC6EA41F9F991902760FFC5
+:10A8A000D3F7A9CC4FE9ED2C40F5EF600D94FF30C4
+:10A8B00022A76B25C037EEF19E3D50BE86E0FD7DA0
+:10A8C000BE5EB519F19C5F4E7642BCAFE97045FCA7
+:10A8D0003B4EF00BACD74FB11F58AFFD725343D670
+:10A8E0004D3EE7176676F6F857EBA6BE99EB0B10D0
+:10A8F0008C8E4498FF0D828437784A484FA09D156E
+:10A900000FF8AF77A96467150C6B3423FC5BBEE5C9
+:10A9100072ECAD252CD207E56F0D5319D26BECDA32
+:10A9200051A7B1DD511688EF07F5475ED20E47C338
+:10A93000FCC7827C0789CC0ABA809E08D14B372598
+:10A94000ACCE473BE2A6EEFAEF37B31A15F1373A31
+:10A950004BAF57C6A25E91F560BC038887D8D6FA84
+:10A96000E547A95F7AB15E57A35F169A3C2C95EC38
+:10A97000549715F97EA69979DA5A6F937B2AC29E6D
+:10A98000E576CB2D62ECE6D117AD1760BE0353B56B
+:10A9900008EC67E198BF4C47790CFBACF7FAA21EB4
+:10A9A0007D5F650F40F99755807150AE27AAECCCBA
+:10A9B0000306CED7554ECA9FAA4AA0F44C958BD217
+:10A9C00073551954FE4D959BF25353BDF1D8EFCCFE
+:10A9D00095DF9AD18EBA2F4CD28FC3B148F0EF7D5C
+:10A9E000617C9FB52872D1678530EE225280A0AF7E
+:10A9F0006B6B46A1D955BCB7F64D4CE1BBEAC0F232
+:10AA0000D58A1BF5D39CC3DA0A649F79471BC6A27B
+:10AA1000D8E9FF87131D116F659714A6C1523AD06C
+:10AA2000C39386E39FAC1A48709DAEF2105C9EBA49
+:10AA3000C637E3A0FDD9AA02CA2F4CF566A6764018
+:10AA400075FBAD15DB8FD9DE684E82F2911EC58392
+:10AA5000EB7BA887F9FD40BFB516AE2FD682BE406E
+:10AA6000FE19963D7EFD5D0CE5B9D617C799143BDE
+:10AA70006B641CF2D5C04233D69BFC13D85C2941D1
+:10AA8000FEBEDC3A39BF5F21FC9CDF1F43F89078A3
+:10AA90002A13F43ABFA7F72D83A0DFFD6047AA0071
+:10AAA0005FF32513C1D7FC59B81F8D0463FB85BB29
+:10AAB000D33A3107CE131ADB30DFBB13033A9C7D48
+:10AAC000E19E04A44786623655825C381B5BFBD747
+:10AAD000CF51EEFD99CB3DC66ABF7E12E562970469
+:10AAE000F70390FBC602FB34DAD75444A05E5C60E7
+:10AAF000651ACF6BBD317F369CD1FE76C08EA4E146
+:10AB0000B89E703C57CFA05C4BDFF178EAAF5CC1D8
+:10AB1000F96E79E189E6D75C58EE27BEDCB6637D35
+:10AB2000E7A72057BA737938C2F53ADA19B04E5E02
+:10AB30005F1D41F2EB758BFB7825CAEDF50EF766CC
+:10AB4000A8F7DC43F77EB917D307CBF2EE45FE48F2
+:10AB50008DA57E66FF6E7E2F6C0F7A9C25C2BC7E13
+:10AB6000FF8A120843FFCB9A034B1361BC3EEB1ADA
+:10AB70004D9D21CDDDA45463DABB6BC111D49F156B
+:10AB8000A92E6ADF777B8A8AF661AFCEFECFAF2728
+:10AB9000FDAED7FB596BBE1DDE9905F57F2FA5F6DF
+:10ABA000CC12A0EF7D5D3FCDE3FBBE1AEA6777DDF7
+:10ABB000848F6F67380FB02C10EE422BF92570BAD6
+:10ABC00016C89FDF95B601FD177B4CBE0DA48F669E
+:10ABD00072FBE3BCD7F704F24D19D4F741BE2CD772
+:10ABE00017751D9497FDB9BB1B3884757DFA8602D5
+:10ABF000C4C7825D8F8EEA0CF5CE0F666E05402FBE
+:10AC0000DA7D7114B6635DC156C67E765577BC0D8C
+:10AC1000DAFD366B787FE413AF5A4BE3B0723ECE69
+:10AC2000E3428FB1861CF20B904A817ABF85CFF840
+:10AC30003DB62EE600F76D71FA94D72D4941FF4AD3
+:10AC40003FCDEE56711DA4F8122B1C41BD08FAEC45
+:10AC500077B87E12ADA25FE78464EF55E833ABD0DE
+:10AC60004FB2BFC7ADCC1716CBED6005F5AD95EB78
+:10AC7000E1CD202F905FA51E867137A6F2F664FF06
+:10AC80002681D2CD0538931EB7F949D75FE1F84642
+:10AC9000BF99B443A6C455EF6B40FF4E84B603C7BB
+:10ACA000917E326676BBD0CE5916E1793195ECA80B
+:10ACB000A6649C03E8C997B1DE0215ECAAB410BBE8
+:10ACC000CA7E657AF2C508CFABD8FE4AEB1BE5E831
+:10ACD000A2EF4D2C17F860D1A336DA77560BFF415F
+:10ACE000B5F06755470EB0E3FA67874DA56F82FE52
+:10ACF0001CC27B68E97751641EC9876AC6DAC4DB67
+:10AD00007E58D71AC89100E8010DD6F7D04B4D2ACE
+:10AD1000E7FBFA43D1FD507E324FA40BF7F526A690
+:10AD200085E847633F40B76338CF612C8269217A59
+:10AD3000D0C362ACB87E9923F6DF9AFF60413F39F9
+:10AD40008FC1C27F37B8F9B30894838BBECF237904
+:10AD5000D8DEFCF689F9FD17CE0F526F4FEF39841C
+:10AD600073C8774E33CE7388795C32DA2D007F3327
+:10AD70007E1FFA9D490FFF4FE1BAFC95CEE36E8529
+:10AD8000F94CB83EBFB5FA717DD6017FE37AAE9B30
+:10AD90009FE54739B007D603FAF17DE3AD64B7D636
+:10ADA00009BF685D0727F98B5EB7F0BC6FAA681F03
+:10ADB000C6482FD44DED4CED3BDB2ADECDC6FEABB5
+:10ADC00023487ED659FC2B53B1FF5FC7B97D402F76
+:10ADD000D5FEECFA137D61FFE037F92CC82F96C041
+:10ADE000ED2AF6F7AD95E1786B620249E5507FCD2B
+:10ADF000FCCE54FF33308DD01F37C8649A31CE81DA
+:10AE0000E59EC458C8EFF9A74A7A604D2EE41D2488
+:10AE1000C7C9BFB7669C27313C1ED38E26824765C3
+:10AE200015F43D85B7FBDCC2EBDD26E8774CD00797
+:10AE3000D639C9016D6C8419F9F8DAB49959696485
+:10AE4000C778121580E7C9D93D18CAD1DB8A6F4C83
+:10AE500021BE117ECE298206B23F26FCA493F8675C
+:10AE60003675CEE630A4E7A4A230F2837E56B43421
+:10AE7000D205ED2769C2FF3951EF17BD36CD43E347
+:10AE800096D566A69D08E1EB9936901BD0FF43E16D
+:10AE90005ADF34E4C7BDB954BE178C959F615D7D00
+:10AEA00039BBC70EF253CC96FBC2C02CA4EBFE26D6
+:10AEB0003BC3FD467BFC508D74807EBB215DE2046C
+:10AEC000BF22FDA784F37D8B19F805F2D5B599B49F
+:10AED0006F79C6C23C0AD26BB78DE85F30DEEE21D7
+:10AEE0007FE294F00D36289F21E459F59470FA5EC4
+:10AEF000BD2FD26F52683F4479DF4E0BB52BB5FAA8
+:10AF0000B76D817E4AF76792BED96315E3BE16C15D
+:10AF1000CBA33C29CBFB617927E283D72DAE682AEE
+:10AF20007F5B65541E1E488F013CC6856913111F47
+:10AF30009D6D406707F6CBBF1F17FC751CBA45FA1D
+:10AF4000F92A22A95F5AFA90D7AABB6E447A6A56A8
+:10AF50005ECE7EA952F971A727710EE48F57241196
+:10AF60005CD26F74DC6B25BE3F5EAA90FDF3A74AEE
+:10AF700035600DF5DB8FDF7A7F3AB4FB6ABF85FC65
+:10AF800072D31E2E398ADFA72D2D23FFE2B4E2C52E
+:10AF9000742EF0CDE2AF06AC85F9342CFD22590BAE
+:10AFA000F1334F2B855621EBF937699E32E4832725
+:10AFB000D3B40A9C5F7956C35CB497BFB1D63F8DBA
+:10AFC000F67F7ABCB608BF5F78F5E4166E4737A502
+:10AFD000A39E5860E67C22F56DB9E0C35EDDB57BCB
+:10AFE000B13EE06D3AEA9588AC7A2EFF165F99FC87
+:10AFF0003F53B7798F02E39484D72DA054F5E760CF
+:10B000003F67954094924678D4705D9D7306A21078
+:10B01000FF9A89DB6D255BF5F3C27F789E55827FB1
+:10B0200040BB925AD51386EB80F9AD087F09B30671
+:10B03000EBA704E905FD10BD98E34FD37F05742805
+:10B04000DE969987FB859298BD0F0DA27AD04EAE01
+:10B0500017B5755ECEA7353C7C7EE7C43A38075FEE
+:10B060002CC82FDB6D72DF4EE37FF36A271ABFA374
+:10B070005827DF28825FB78571BE72C3BC10CE1718
+:10B08000395F3D26E5E436DE4F499CCF8472A9A4A2
+:10B09000CA497C25E512C042EBEBEC8E246A27E519
+:10B0A00018F33246F577246EE4F69BD8BF22C050E1
+:10B0B000BFF8F77C1CCCA33C3FF37C921C97EC6759
+:10B0C000A33E36CE7B7F9A89EC2DD0D39DFED5FE54
+:10B0D0002F2361D6FAD97D43E613691572C19D30DD
+:10B0E0002E1BCF0BACBA7EBF89B4CEF038F0DC405B
+:10B0F000FF5DF6F74E1ADF1F7633D0B9B3DA74C0AE
+:10B1000086EBF059467AC308C787A2DDF3CFB7D0E4
+:10B110005515FE71E692FCE4E2F63CD1EF9855D26B
+:10B12000EFAE2490C72588ABD4201EF7E46A49A867
+:10B1300037BE11E73D7B62209F85F614A78BCC4B71
+:10B140007A18F972E9B1B94978BEF4CF34EEB73361
+:10B15000E27B09E015CBAB2DB05FC9C27DEB914717
+:10B160004EF408CEE7EB2A8F6776487EEEDA5C3B3A
+:10B17000AEC779EB72ED3343E851BDB5EF1117E07F
+:10B18000FDDC56B31BC57BB5D9FF10DAE9D55BD51D
+:10B190005AE42328B723BECF390EBE8FF5E6AE8B17
+:10B1A000C9433B5CB69FB776A46776081D7A6FD516
+:10B1B000D325BB569FEFB3579FB7776734BFAB6DAF
+:10B1C000971BD0E7FB1ED1E75913506F00DA039CA1
+:10B1D0006EAF0C741F7101DDBAF955377EEAE618BF
+:10B1E0003F610CDA11EB54770F28EFB6D87B33DAD6
+:10B1F00015A7D6CD7123D98B54DF825F014D8BBE4D
+:10B20000187504F5EA5956FBE918A0CBDCBAD556F7
+:10B21000B30BE7ADE7F73D26C1BFCF737FDC7CBF43
+:10B22000BEBCB55C5822FD1819A1FC65E40318F7F3
+:10B23000560F00545AF9F12328178A4603E3A31E38
+:10B24000AF5D6D45FBEFF2E3F8B87DE9F0B8101F94
+:10B25000850379D9759523D857B0EED8AA0F472121
+:10B26000DC85BF55C8FE287CB9E761E4AFC69D53B5
+:10B270006FA2F4D6029ABFF4FBCDAB530291907744
+:10B280000E74ED6D807673FCDC7F3173992D280F81
+:10B29000199E7B19E05813520EF0CFDB7BE0473C40
+:10B2A000172E5AA76F371FE434EA9FE24D3FDB4267
+:10B2B000BFCBFDE875751B549CF71C01BFD49FCC18
+:10B2C0003794CE1DAEE34DD809FC3FD03BBFEEA86E
+:10B2D0008DEEDE3FA847AF5BC3DB83D82DC47997E3
+:10B2E00039AC2E9C77999D0522009E2391560FC65E
+:10B2F000955C5C1B497EB7B936B057F3286518B723
+:10B30000008298CEBFBEFE4025BBA72C8ED3BDECDD
+:10B310001985F66965E82CC5FCB33C3F9F05683E7E
+:10B32000C82F9ED079FAF57956C3F777A5E6C00104
+:10B33000C44B316BE0FB33A0A727E4FCBA14E6F959
+:10B34000592CDA6F86F6CCADD1B99C83DB63E57BF3
+:10B350007FB68596CB7DA6DC074B7FF033E9DE70A8
+:10B360001CC722ECE635F77BD211DEE5164F3AE238
+:10B37000C1B73A8CF6FBB76DE0FA6B4D0CD8B1F162
+:10B38000643F933D7E9BC2ED733695CBC341A69738
+:10B3900002A86F9A1E8D716F74517DD2636B1ECCA3
+:10B3A000E4F6FF3F55B2879A56F3388835B91C7FCB
+:10B3B0006B1ECCE6F6BFD47B1D18F5D7DADEF6A4FB
+:10B3C000A31F823DC2E1FA1CA714625FE776D21E7A
+:10B3D000E81E323F6997B3A22B3B9FD82CE2329AEA
+:10B3E0005687F9F17CE284E27DD31462DF3ED59D7D
+:10B3F000EB8901C33D5B443D3AC7986D1AF7C0F530
+:10B4000000D7ECC74C2EF4A7B5E0DBE34947FD7944
+:10B410006275581EF2D980E1DCBF743C97CBFD8881
+:10B420007E8CE29B36897E377537E9D28470E03FA7
+:10B43000E8E7C448EEDF8EECE725BFDE661797FB32
+:10B44000C679D48A7E665BBDEF0C69031E891796A8
+:10B45000CFED8E13772A1B395C406FC80FF85D184B
+:10B46000F9034F08BD24F10B7C43710C526EC5B437
+:10B47000F08B7F5B18F0CB6A0BE703B96F0BE1171A
+:10B4800041FFAE44DFDB047DD98361825F4CEC6F0A
+:10B4900088C7914ECE0F57B9FF027A1F417A1BF72A
+:10B4A0006192DECCECEFFFAFCE51CA5E79618F0FB7
+:10B4B000EC8CE2171F8D6250EFB4B9A6A31BDA978C
+:10B4C0006E5E1EE581F494D917E584F14FFBD50239
+:10B4D0007F1BF8B6F690FE688F430939F73CF3FC02
+:10B4E0006FC7E23CFFBAD9E2449150BED546FBB1EA
+:10B4F00005BBE693BD0EF9469EBFEF5B3C072DDF13
+:10B50000ABF7B7173FF7684717E1DB97644AC034DA
+:10B5100090C4205DB0C9D2722E0CC380FDDDB40290
+:10B52000E133B647382E01BDCB6BD5426B74EBF2DD
+:10B5300072215FCA77FDF65BF41B96EFBAF124CA5D
+:10B54000FB72839FBF489C7718FDFC7FEDAE3F47A1
+:10B5500006FC50DC800FE0EA41ECC2FDC4D5DB1EE6
+:10B56000CF6944FB61D3BB514A56D0DF2FCF419AFC
+:10B570006B673D83FED3F6D6E537C2DF1BA41B976E
+:10B580005FAEBD0A0F9AABE369A925103508F77BBA
+:10B590001B2C64FF96BEF0EC962791CF8ED948BF46
+:10B5A00097BCF0C6A7D7A1FDBCD3123F9A4FC3A149
+:10B5B00084C4D994BBB83F4ED2A7F8E537ACAE6C83
+:10B5C000FE7D716C904E253B0F5831DEC788CF1140
+:10B5D000B507AC0D8E36E855DB388AFC50DB7EB003
+:10B5E000E2FA38BD5F619D525AB72FDAF04614DA9D
+:10B5F000678827D44F926E2D7434D487FEC7BED689
+:10B600008FEA39719F72393A7E2AECACB2572259CF
+:10B610000CC051F4B9CD3F1AE9BB635114CEE7A475
+:10B62000B982F3FDFAE51DD1DE2BB2F83A3A29E5ED
+:10B63000DF8B9EBE9BF8719E52D1D19945FC9E68CE
+:10B64000225BC29788F39CB36E12CD732ED3881FF2
+:10B650008BD6AB5E3FA4DF9B59C1CE36D6CD52B15F
+:10B660006E4E6E04E2C23C4F8A782BDF47AAD84761
+:10B67000DF49FAFC6E3167C61652FE7B61CF4DEC96
+:10B68000D1729E6D0FDD87966FBAAF1EE974A6ABBF
+:10B69000A713C20978F009BC293F43BFEA87233BBF
+:10B6A000713A3117C623503BD0AB23F03BD6AFB72E
+:10B6B00078D0CF1ED24EEC13F9F87789F101EE70F5
+:10B6C000DC079FECD8763CD7CE16B9C0EA43E3B985
+:10B6D000DA95039BEE27FEFAEE132E6716F8C715D0
+:10B6E0005079BD25D009CBFD07262A24276C2CD004
+:10B6F000D63ADF6411EB5C5F0E709A9550FCEEE772
+:10B70000F6A9E497B960970542EC8420FF5883DFDF
+:10B7100069FEBF13F86EA0F33979AE374FC807E35F
+:10B72000FC8DF262718FB6E34ED8BAB6CF938272B7
+:10B73000C247E396827E477BA4F4988DEC88D217AB
+:10B740002C5EC4D3D9ED873EBD0DF7B7B5725DEB66
+:10B75000E5B0715D17BDD4BFCD757D76556EDBEB61
+:10B760001ABEB7B9AE572924EFFEBB7218341FF9C1
+:10B77000252EB77EE7B523879F33E0F57B96153DF1
+:10B78000080B9D85DD884E06FC4ABC1AE5EA1014BC
+:10B79000921D5ACB5586211A21F8947894FCCA98A8
+:10B7A00046E3B4F0B5E45BC9D72D7C6B9CB71E9F14
+:10B7B000C6F2F9487B80C7FBAA85EC85D23A1E6F9A
+:10B7C00008ED283EAE1CFDF354BBE6CDA4F8D0BC7A
+:10B7D000DF90AF35D4F718F25E437DCD90AFD0D572
+:10B7E0002FDD7BC8CAF70F015D3D5BE5CDB41F6956
+:10B7F0006D67F8F9B9D3AE6FAD3EE48F2E4D569418
+:10B800009396A5CC1709ED9BF6A964F75C703545B6
+:10B81000A1DDB23C8CDB75179C221FC3F34D1DAC20
+:10B820002B504ECAEF4D61DC0F73C1DB141513B200
+:10B830009F6FAC53A3D0FFDBE067056DC7AB54131C
+:10B840005E1B587BE5DCBEBB10CEFD0D17C2B9BF39
+:10B8500061A4EA48AE443F6C0D8F0B9CBD6472142A
+:10B86000C555D4A5DD3205BECF795BE561E03E8FDD
+:10B8700019E319667152B253CC47F181B3EA785C8F
+:10B88000C3EC557A3ACF756CA2F8B7EFD9624AE7A4
+:10B89000AED1C72314B355C46745EB0CDFEB6EA6DE
+:10B8A00075526C58279AF00F1BD789235DC43DE66B
+:10B8B000B25C5DDCA390E723D5AC5BA6003D2E1CFB
+:10B8C00051990DF2CD752A5BD18FC7B9E2F9136E8C
+:10B8D0004870FD2D80F58A7693C4D7395C473DDBEF
+:10B8E000B75FCEEDFEF3805F21DFECF92207CF8555
+:10B8F000CFED3996FE3AE65FF963F217AC75FD11AC
+:10B90000FB7F9C8E72FAC27E1B437EBFB0FFAD648C
+:10B91000F4475E78CD46FBEC0B4B6DDCCFBD3FD2E0
+:10B920008F2AE642576E1757EFFB21A781F4F232B8
+:10B93000A2DF35E9566E5FD5FDFD38FAD39BEB608B
+:10B940005628F7F747D07A2A7F2D8CFCCC17F6FDC6
+:10B950003020D43FF7DF9D8F3C4FBF10C9A6BC8479
+:10B960007C1CC3F705E5AF5FFB2C9E2F97ED3A607B
+:10B970009D05E523FEEB1F3928572FBCC4EDA96FA9
+:10B980002C0D4FA38F73F896A8472C89E8E783CE38
+:10B990003A33F6C596B1137C596DE185E3E102E0D7
+:10B9A00001E7057829427DD01E3EA6223E3AFC27BB
+:10B9B000E2E3DBE95CBE5DC3F03C3A8817C5C3BF78
+:10B9C00047FAED0ACD9F7FDFFF430ECA9FCBCDF72D
+:10B9D0009EFFCFE6FBE87FEC7C39BF774D77119C6B
+:10B9E00046BE6FCDD7AFFC82F23B22DD04EF15AE31
+:10B9F000F7DDFFB1EBFD7F86DE1FFFC7CEF772F4E8
+:10BA00007E5BD03BD289E79917F6FD23995DC5BCD3
+:10BA10009BFF97CE5BDAF1C355F7915CA8FF2EAB85
+:10BA2000FDC49D42D6489B7648B7609C1FED9F465B
+:10BA300030AEA747D84BC8FE1CD1E541B297AB59F1
+:10BA40001E9D5FF8BAA874AE4341208087B712727A
+:10BA5000E95E153307BA2C82FCF0A4328AFF32EE7D
+:10BA60002B47848F2940FBF4D012800BFA391469DC
+:10BA700072E219757E177E4F09D2464CDF4CBE9993
+:10BA8000E2F8F31DFAFDD5CD867DD28D2E7D7901AC
+:10BA90007B291ECFED0AB22C745F6214D60FD957E2
+:10BAA000FE23DD4978B991D52C733AAE1E4FB70805
+:10BAB0003CB5C6C3BFC65B2B3C897DB459D437E2C5
+:10BAC000CDEC78A01EDB9919EC8BF97C693F2DF742
+:10BAD000C597C32713FB6DB3185AE2D7DC859FCFF8
+:10BAE00086F44B789178BF5A7C4B3A19F12EF12BA2
+:10BAF000F166A4432AC6F8F50FE2BF8B39D78CEB69
+:10BB00006E88B0EBF3CD313CDFA55EF5D27AF473ED
+:10BB10003EFFCE6D46BB7E982386E2428DF71166CE
+:10BB20000E8C19A0C07C93CCCC67837D289EBD91E0
+:10BB3000DFF57EB37F690A8EC3FDBB5DCDDC7F0D73
+:10BB4000ABDB179E47F53D56C8173E328F79A07E76
+:10BB50006112732BBC3E8B8EA5F038A6C6F27B9B80
+:10BB6000D8AE309AF75BD889F997727A125DD0ED2A
+:10BB700083FE0DE8D7638AE5EDA3F2A8BDCFC4DB51
+:10BB80007BCC90764BE3710A4DCBB95FBEF0BEAE75
+:10BB9000E9283F460FD7FB99DFEAC9FDD232ED9B7A
+:10BBA000E1227CA9267702DD8F589649FB2335DCFC
+:10BBB0005BB61BFDF43B789C4EE18A3BC6F447F82C
+:10BBC00076C4B911BC3363770EE0F5A7DEFD07F844
+:10BBD000AE6D0DA3EF9333B4A53D311E40714DDF23
+:10BBE0000D1F664E3A644D8021B4DA71E7D14F38AB
+:10BBF000D6B7F37D3C9F1C3B51A5FA63198FF764C0
+:10BC0000CB601C281FE3FBD69C00FD8D814D079661
+:10BC100037863993EF04F80B857FF8215C2F086F86
+:10BC200038D35E72205C5DD353E1FB18D676BCF14D
+:10BC300051597FB8B20ECF99BA8DE0FE7B591FFBE8
+:10BC4000C17E3FEAC9FD514F8854E601AF547FF6EB
+:10BC50004A5B631AEE7F565A023D2175F41ABEBE46
+:10BC600027E06F742A1BB516F17EAFCA3612BC4DA1
+:10BC70008574AE1099E1423A68C0D274BE5293E224
+:10BC800042BF58E3B0DA009E27343E91E2AE76110F
+:10BC900095291E48EEB71A8705BAA31FBF29979F9B
+:10BCA0004B1C773644E27E7196C3CEEF498AB8A228
+:10BCB00039E25E4CB7EA8607AFC17DE8A32A9DD77B
+:10BCC000CC7994DFF7FA8BC3EE5770DFB646DCD73A
+:10BCD0005CA58F23624E37F98166D50CB3E27E7383
+:10BCE000B6C363C579FE31437B1DE725EF17F642E6
+:10BCF00022409785358514AFA246C1BAC3756276D6
+:10BD000045E13ED81887542EE28E64FEA170ED30D6
+:10BD1000F2C3CC68D70EE4972F2BD3C83FAA0ABE34
+:10BD20001B8D7195789E616E484478EEEEE922BED7
+:10BD30001C1DEB4C77103F8731C443A3C5998EFC83
+:10BD4000DDB83CCC84E772A39772BE867566374334
+:10BD5000FBFBCD2C1CCF197E27DA4F5B62F66E8081
+:10BD60007C173B3347C6225FE5125FDFD24B7B0275
+:10BD7000E777EAD76C20F2C3AC55ABE93C46F20555
+:10BD800033D7E7C7C138A736A7E4A1DC6C91D3BD90
+:10BD9000867F81ED5AF861A2427C00E98134E28716
+:10BDA000F10D38CFD1C303DD1766E17EB49479502D
+:10BDB000BF273037DA09CDAC89CE2B9B1D5617FA39
+:10BDC000BFA43C917203E8EAC17BB7920FB680BE74
+:10BDD000375B18DB5A65A7F4F92A2733F7606C7BC9
+:10BDE0005502E57754B928ADADCAA0EF2F55B92952
+:10BDF000BFAB6A20E5F7547928BFB7AA80D2D7AA8B
+:10BE0000BCF45DCA25C00BC9212957A43C9AE5B0F2
+:10BE1000D27D5F29978C7C331DD03B348FDA93DC45
+:10BE200093F20EE761CA0BCA2349DF54C5EB4B48B6
+:10BE30004139D63015E93F523DF7C22BB82F2F724A
+:10BE4000B8699FCEB8DC6B067E45BC245BD95EF436
+:10BE5000CB56DFE969BC2F2588FFDB8B14660EE12A
+:10BE6000AB3B2AC29839446FCCA88CD1E5A7557E4C
+:10BE7000FC4627E8FF9E0E5A7C06C071FC375FAF78
+:10BE8000FF237C7FE637677A20BD018ECD8FE3B834
+:10BE90008BC35BE088C5FC320B9D737513FE936EFC
+:10BEA000C27F82FF903EF27EF333BFF91BADF3C633
+:10BEB0004A9B0BEDE2CF915E80DF3F097ACDACB4B7
+:10BEC000111E0B977FF5C22BB8DE175B49DECD5CE8
+:10BED00026D6A3E15EF397898CFC126055B34AC065
+:10BEE000DF97BFB60622A0FF2F15BE8E15300EA617
+:10BEF00061FCE1CAB73E4339A0541EA1F3770DEFB0
+:10BF0000E1217C3ECB39DD3DE9CA37A91E6BE81241
+:10BF1000837E1379CF38A29FC7EA82F9236F23FD6E
+:10BF200066661C648978CE52A338D185385B7C9FC5
+:10BF3000BD92BFDB80713C13C1FE1B92A1123D2B51
+:10BF40007B9A29FD14F52DF9936B484F49BE9DBD91
+:10BF50000ADAE1FAA8C9B5CE0D91C733C5F7591968
+:10BF6000264AE5F731D82F9EFFADCC9D82764567F6
+:10BF70002CCFC2346F0AE2B7B363945909E1831B33
+:10BF800032CC020E46ED3EC54507E90319A9D63964
+:10BF90005974BF8FF4981C676646DE0A8C2F9DB9D2
+:10BFA0006A184A61566D7127C4433D6F4B3FDC7E72
+:10BFB00063761E475DDA8E1E917EB553F8E7B53481
+:10BFC0006FF2FB16EFF8FD8ED7A0E7E22F6C44DF8F
+:10BFD000E23E226E2BCB3F60023920F5FEECFCDF07
+:10BFE000FF398ACE2976F1F84E48B99F757111F75D
+:10BFF000CBBA617DB5715E7478C717516DFAB177B0
+:10C00000A957E4C72E577E8A423B42CE67E4BEEF73
+:10C010003B121CCA253A272ADFB7BC635B715E4618
+:10C020003F768BBF5BF8F5CA1717B4E9EF36FAEF26
+:10C03000966518CE0FCC8CEE8D49FF1D53B3A2F13F
+:10C040001CE07B719FA4BD7D8EF47F97AF854EE28F
+:10C0500060BD9A5DD178BE75A11DFBFA6806D7FF59
+:10C06000E785BFFCC27695F63D17B647D2BA5AB0FF
+:10C07000FD9137F1DC71C12685C02863F5843FC08E
+:10C080002BB387EA358C638B6B0D77B3BF4734EAEC
+:10C090009592DF475620BFCDAF553C9B019E66BBB6
+:10C0A0002BBA43083C5B91DF807F4A6CB50308DF05
+:10C0B00002FEA7514EF60FD69B5FF708F997A1DE57
+:10C0C000376417BD1881B10288F7F711CEB3EBFAC8
+:10C0D000BAF1BC707EEDCE0564576C8F70A25FE143
+:10C0E0008C885B96FDEC12FCBD2B83DB3167C5F9B8
+:10C0F000D1D91DFC5E3FC289EBEC8CC2FDD0B2DD14
+:10C100006B02CED732F8BEE48E0CBECE65FDF9B51B
+:10C110008D51DDA1FEC9BD1F537A58D49FEFA8CF22
+:10C12000417D7C7257049D7F9DDCF5D4A8D761BC0E
+:10C13000F3B5C3E2715DC8FE3FCAB050FDF3EBD466
+:10C1400002C417F3F3B89932C46FDF5038E336F8FE
+:10C150005242D71F8F1F3ABBEBE5285356909E657E
+:10C16000F60A7BA209D7D19D5EE4EF68641E80D7F2
+:10C17000BA6B9C0F7558795D2E43BEA6F59748F5AE
+:10C18000579A42EAD92C6E8A33B5EC2DF48837548D
+:10C19000F83D2711C73F52CDA273C5E97D5C936F6F
+:10C1A0004739F9AE85E8B130D33519E5D3C57A956D
+:10C1B000219C0B535800ED9345F7466E403D26E118
+:10C1C0009EDE97CB83D2950AF3C0FC4AFD2AD3208A
+:10C1D000ED0CF4F7213F2534F4C738C9C6146E5767
+:10C1E000C8F8D1278B4C1E2BE8C19F3262E5FB0FAC
+:10C1F0004FCCC1F3B3F119B49F3B6E653E15FD4AB8
+:10C200002FF1F8D2D2541ED7FCA488872F8D0DA40D
+:10C21000C7417FE7047D4BC707D231EEA2F4A544A6
+:10C220008ABB3867E5E79EF81DCF594BF3A0BD8365
+:10C23000DECDD064FB98107E2A9DE976613D35D62F
+:10C24000EDCA7520BCCE6FC8CEDD1DC9D0CE35BDC0
+:10C2500012C9E3A69E0BDB680BA19B3393F39F7C73
+:10C260008F83DDC6E38C1EB3F0B8D4C73627FAFD42
+:10C2700021F87ACCA24D453CE03CD0BE9F6FAD4941
+:10C2800047FB57C23B3FAA86E03C27F87D7E780DEE
+:10C290008FE716F77BB13EE61B451C7AD3361BC5EC
+:10C2A000019D49ACDF83E39FD996892FF200FCFE04
+:10C2B000B97BA91CEC4BA067F1F3B600CEE7F436CE
+:10C2C000EE8F3E6DE1F6DAE971092EA46FC1F8B583
+:10C2D000D3C95FB3C9A6A09FEFB4C2AC0958BEB919
+:10C2E00003C59F17575552FC7631880DBC3F046932
+:10C2F00001DE033ABD3993E2CD4EE33B0C0A7D5F8C
+:10C3000089DF355633FD97888FAD7C7F75E6F9BFA1
+:10C310006786C67BCBB478933EBE4EF2892CCFCDD8
+:10C32000E4F22D57E0B97F267F2FA42CA2F6B1545A
+:10C330009A27C73BD089BF5BC31A229FEA87F114B3
+:10C340003D1494234FB240FA53E877D8CAF75F6799
+:10C35000B65B286EBDF895480FC5B1DD778D89E2D3
+:10C3600029546EA7179B007D902ABFD94AF165F129
+:10C37000CF87E5D9C83E67B4CF6DDAAC8A71C026E5
+:10C38000C6796FE171C7A3D196A4F26C2A3F2DF252
+:10C39000A7F76493DD07FD7BF07E55F12F7FC5F194
+:10C3A00038A1E828B7BBEC246F4B5BCE790647A3D6
+:10C3B0001E2CBB6F5034DE3F641FA80CED16239E6D
+:10C3C0002E9ADD9D50CE2ECB147277CF7A3A9F2ACB
+:10C3D00011F7084A9E57F83934AC43BC9F59B262F2
+:10C3E000D0E3C49FEF5B580F98CFB9DA47A242E978
+:10C3F000B12093CBD396FA5637D52F81FAD84FC9AF
+:10C400008A77A3089E2D168A5731D2F18ADB3FAF77
+:10C410005E51FB16FEA8E57E9656F367F5BFF8025F
+:10C42000FAFF6E7B98DB475F6BE91EDC594BED5CD6
+:10C430009CFFD917C2486E9D8DE1F2E124C8535F7D
+:10C440004F84E3E68729BEEBA309747F6F9E5FDF0D
+:10C45000AF1C77512697E36571EE688C172CFB8033
+:10C46000CB41A0CB2DD4FE030BB537CE63BC68D730
+:10C47000B23E5F88207E38DB99D3E5EC8E9EA49F88
+:10C480001A63389F03BCC978DFEFEC0B3D73E91EDC
+:10C490001D1A3DC00FC562FF7B36A636D91952DE84
+:10C4A0006811FBB800D444BEC13620DF8B2BB9BD68
+:10C4B00055625F45F12518AF3B208FD2802DB675B0
+:10C4C000DC2DF02BED2FDFC9147E4C1CAFA388139D
+:10C4D000273BA8D68A725B13F662E97663DC2E2FBF
+:10C4E000DF26DB03B4F1324E18F9D0A7509C4AC9BD
+:10C4F000B23BE753FC7DC5EADB719D49F84BCCAC00
+:10C5000000F7698D8A4A703486B119E3D1AE0C1DEB
+:10C5100027C49EDB151C87E1FB5FA5F807ACD9BDDE
+:10C52000992EFA8EF91AE8AF7499B28AC64991FB2E
+:10C530005D3E2F8927408715E3041B8789F276E645
+:10C540002DE134CEBBC5EECAE4FEA5C614D7C38325
+:10C5500091CEEFA9749FF7E24F7DA363DBB0D38246
+:10C560007ADE1A8C9705F88F6532EA677D26B7D395
+:10C570004B301E17E04C5FA78F17CFD8A4CFF7DA48
+:10C58000AECF67EDD2E773EAF479F7617DFE8018EC
+:10C5900017F7E1787F18F7E198E23EDC65E3FB707E
+:10C5A000CCE33E1C53DC87E377DC87631EF7E1981E
+:10C5B000C77D38E625BE713F8E79DC8F6379782F91
+:10C5C0008EA752116F8974407E67AF86E9EE235DB6
+:10C5D000D8C7EF97001FF07533D54AEBE649AC4159
+:10C5E000FB11EE77EA3CC1EEC2F8E15571DA7799BA
+:10C5F000FDF11E4AFD8A44A49BB981E258CB5FE35A
+:10C6000071ACA579610EF47F342C3FB902C343B5F8
+:10C6100038ED47AC7FC1D2B405F15B567988EEDFC7
+:10C62000372C717D703DA71FF96158512CD9518568
+:10C63000A8E762DBA7A3319E9CADD2C78F1BE3C9DD
+:10C640008D71E4463E90F6DF3396A64494EB5F6D21
+:10C65000B3AF42F8BF0A13F761A6D80DF1000E92EE
+:10C66000270B1F5436A2BEEEDC8BDB51CD47C05EDC
+:10C670006F43CFCA74D6A5BE6497B7E45729268AFC
+:10C680004FD73CA4871609989295A6C6FB50CECDED
+:10C690003791DEBC08F61AD9839FA8643FE03B5966
+:10C6A000A1F3C177B242F90BDFC9D2DF97E8ACAB97
+:10C6B0008FEF64E9EF4BF4D2C7E74F5C7200F7FDF0
+:10C6C0001356F5D5D59BED1D64C0A3805BD8B3B3DD
+:10C6D000417F78D0BE5CBC3619E9BB687E73E37DD0
+:10C6E00040DF45BBC3DC585E84FF0772B108FAC463
+:10C6F0007B9745BBC4FDE54ABD1E9E25F45091992C
+:10C70000F99CB1413E2C72324F0CB49FDFAB3E0717
+:10C71000DFC39AFFF6C7039CA9B8CF18D609E55125
+:10C72000B2C54371B5A53B7BC42C817E7BF7D06E2F
+:10C73000EC05EBFA44CDA187A6A13EDCC9F77F5FEB
+:10C74000AD7A398AE2CB04BF255B9CE148F70D3511
+:10C750003CBE0EFD676A6C902F36D4C48577770493
+:10C76000E71BE4839F884E401FEEE7293A48E72203
+:10C77000CDB562BEC3141FDAD9727EF21D2DB68C00
+:10C78000F77397C89F10FB0D39CF739907725C78C8
+:10C79000AFA36A6FB28AF2DCB47D0BEE43FE69D3BD
+:10C7A00066F7EA8FF1A03DFE88EFAA15FF81CFE77B
+:10C7B0002F6B46445D8BF6E70B16F768C8DF57F31F
+:10C7C000AC15F715C566BF95E233B76DB062BCF224
+:10C7D0000D5B37D0F7B95B0B291E731EABA0FDE8CC
+:10C7E00029F9EE81C047D170659D13E07E47C88F5F
+:10C7F000A2707EBE07F6D11BF8EEC8C5AD4A2EC6A4
+:10C80000F94CF4EEB416C2F75F8B7AC675D27C741D
+:10C81000C2C80E840F7E0FE40F0C76F769ADD7C542
+:10C82000844B29B42E265EEA4DFBB449814CBE1FD1
+:10C83000CE32EC878FAADC9F57C7D7419135103F86
+:10C8400001D7C97E0BD9B96566FE6E5319FC7D1DF3
+:10C85000A4DEC1AA8E5FCBF32374FC3C85C5EAEE4F
+:10C86000D3DC8A412521F989A3D374F5274FEC6DD8
+:10C87000E0FFBC6039C991EB74F7FECA16FB5CF4AB
+:10C88000BE211BAEFFCE787C21BD086A0FFD3E3E67
+:10C89000580FF97B93C2F73DBB6236A21FB0C8C4E4
+:10C8A000F74F5334FE7DC15EFE9D4D61BA75D82DA4
+:10C8B000CDFD47AE172D746E20FDED53F0EF36F031
+:10C8C0000F9AA2E51E3BDEE347FF84EE7EB7382FCA
+:10C8D00044B8910E65C29F5496C1FD4965BE7A2B3E
+:10C8E000BE9300F837C7C5523D7B1CC655D628E419
+:10C8F0006FC47431C559EAE3B4B03F8C7F5C7044B7
+:10C900002DC475622C2FC2778790BEAFF1B8D405C5
+:10C91000E8178A6AFDDED902F413A17FCBF0BE9935
+:10C92000A3B74BF811FD2B3A231E472BB9746F7335
+:10C93000FB012BC6E74D9C18938BEBC7C86752BE13
+:10C94000C3BAA6B8C2E6A38788CF9A8BCCC4C797D0
+:10C95000C3C7020FF7B31AF96F2EABB7E2FD94B954
+:10C96000BB1437EE4BB11EE2A533F2A5012F71B116
+:10C97000ADF121F1D4823743F93CC6F1356FAFE216
+:10C9800047F9D80A4F027F46F8DBC39F9CD75C4D1E
+:10C990001B857242CE6F1ECE03C78179E038F2DC70
+:10C9A000820D34AED734F25F2DF0F2385B237F8CEA
+:10C9B000BFC4FD32B75E32533A71B47E7D623B5CD8
+:10C9C00027932E75A4F2ABE59F050027EA85ABE51A
+:10C9D0001B391F298F83EB84DF4BB8DCBB4546FF37
+:10C9E00064426FE19FECCFFAEBE29B85BC35B63732
+:10C9F000C6374BFBC0A8770A234D146FD9EC4825E6
+:10CA0000BB43CA5F4DE8156DF9F7544F837A1C1A82
+:10CA10008F4E0F69C24FB8303295DE91485E12D703
+:10CA200011E95518E6A4B8FEC2252AC55117423DA2
+:10CA30005788DDB262595A32EA912FEFEFF9B40FFD
+:10CA4000ECF92FEF8DEF3810C6F96AB925DEEE0A42
+:10CA5000D6FB72F9C8648CEFF86AB56D8ABF0D7C9D
+:10CA60000DEFCDFD0A65BFF98CF4DC79D3D1A8298F
+:10CA7000D0BE74F9EE28BC3E50B29CEBF7F7BA6B0F
+:10CA8000C37AD3B9EF862DF49EB173430EFA89BDF4
+:10CA90001CA72D7645F1F2919DD0EE28FDE7A1A7C8
+:10CAA0009D782F7C89A523DAA5A73F013DA9909EFB
+:10CAB000237BE254187441E77091F49ED92985795B
+:10CAC000F03CEA9CE9C05FEFC3FD626E6D7A40C145
+:10CAD000C353CDDB1BF7F7CB9F257BA6F88125E958
+:10CAE000F8AEA0B6A447745BFE14996E11FA1CED63
+:10CAF0007A4CD1AEC7F81AB4EB318F763DA668D721
+:10CB0000E3F7F2B57ABB706A4F2EB7A4DFB95B7555
+:10CB1000532E9EFBF986B38C0AD2C30E7A07789106
+:10CB200012EE46F9B4086D28CCFF3982FC0EEC9366
+:10CB30001B757496EF04CB7780873481AD16B24EA7
+:10CB4000AEBF6467A1F77487B1185D7E843D51570D
+:10CB50007FA43345577E4342A6AEFC4657AE2E7F98
+:10CB600073C6B5BAFA63DCC374F95B06DEA8AB3FE3
+:10CB7000CE334E979F503055577F92B750573E79DE
+:10CB8000CA7C5DF954ED4E5DFEF6A27B75F5EFA80B
+:10CB900058A22B97EF22D7E17ECC86EFBFD82995FC
+:10CBA000EF23DFA3327A5F6DF00813F733DAB83E74
+:10CBB0005AF45E0F47281F3C29F8F95296E751E4D2
+:10CBC00057F9BEA57CB7722BEAA3FE788E1950F8F0
+:10CBD0007EB83E11F9D858CF583E38E2E04517D01C
+:10CBE0003266FBA94966901783AF39D8370DF253E7
+:10CBF000B7E7DC4AF941075F4E857C61D6DDB79A1D
+:10CC0000415E0DEE73F022969FDDDE97974F6064D4
+:10CC10009A94657D3209E365075F9FBACACDFD2806
+:10CC20006DDE779729E203EF89233E300D001F6305
+:10CC30007A10F818D3C3C0C7B32D8CBD097C8CE91A
+:10CC400011D89FE2F777607F8AE951D89F62FA3E58
+:10CC5000EC4B31AD877D29A61F554DA1F4932A8D4C
+:10CC6000DA7D5A5544E9675515F4FDF3AA4A4AFF9F
+:10CC700054E5A3EF877B4BFF4340F77E687BEF844F
+:10CC8000CA734E79AE595DC11A22506E349863BE94
+:10CC9000B607CF2BDBF71398D9D721F65AB6E2F9AE
+:10CCA000A0378DDFC54971E2E2FB1D29DA2748E78D
+:10CCB0003FA44CE8D157453D56F10686DAFCC1D475
+:10CCC000F67B905B7B733BF9DD2CCF31EC6F889D5D
+:10CCD000DF4F1E62E7F78F8798EBAB91BFAA7F64A7
+:10CCE0002E8CFF3910C9DFFDA8BEDFEC473FA872CC
+:10CCF00089AFF3A1F18CF2D53F36D07DE5214E7797
+:10CD000002EA2B996F39F7C77F21713EF21C5EC68C
+:10CD1000F7E45FAA1F81F6C25087D5857224346E6E
+:10CD200000CFDB0F447E2DE161389E3CDFDFF42332
+:10CD30000B987282E7F843ECF529E837187A97DD0B
+:10CD40001D1AB724CFEB954B0D2AFA55657C921C22
+:10CD500047C21B6986FEF282F147439CB5B978DE73
+:10CD6000515DE6A0FE3AC1776B1ED5F3A8D4AE366E
+:10CD700017FD72434B1D14072BE3043A8979433D99
+:10CD80009A67FE258DE224868A3809ECC7CECB7DD2
+:10CD9000D8CFD0F84022C6810DADE0EF90AD57F866
+:10CDA000FBF3326E01EB4784AC5B8413FBEDFE3783
+:10CDB0008017ED288F87F03B41EEEB5C222FCF1DD3
+:10CDC000EDC3C9BF3542C89A8F53B4CE59786FC5E9
+:10CDD000E6FC7304ADEFB4AEE8371D27ECFA7FC173
+:10CDE0002FDDB0DD7F9F5F3C9CDEF8807F4A6BBE0D
+:10CDF000917491746E8F8F24DD43E2CC88CE2D71B7
+:10CE000063A21F237FB5C757929F86D839DD91AEA5
+:10CE100018A726F948B9C4DF751B5A6A277D27F978
+:10CE2000C8C807ADF988F365F5DD76EAAF351F05AB
+:10CE3000E98FF8F8F7F9A841C5F3ABABE59F194DB9
+:10CE40006C5434143D94AA6D45395278C9F526E6E0
+:10CE500067B161A390A564F9E358DEBF75B9F65DCB
+:10CE600093253A84CF86083EDBDF4E7FB29E7CF767
+:10CE700042F67FBC9DFAEF0ABBE1DD3019A7E271F3
+:10CE8000E40E08C68D2E1AC9F9AB204525BB6344B4
+:10CE9000167FCF9C39B89DED82FF501EDFC4B4C30E
+:10CEA000D129F8EEA897DE1B1D156F786F54D8E7CF
+:10CEB000058673FE9BB26E20FBFCA6CBBC5BBD2C33
+:10CEC0004BDCDF49612957F9AEE86FB3687F78A57D
+:10CED000EF8AF2F768F3C57A4F12FC94E652D9E074
+:10CEE000587C9F5D33A372398CEFD1E6E0BBAD3E39
+:10CEF000CADFC8FC94DECC0264478C014584F95B30
+:10CF000018A37BFB8722C64EC33B8723FA8EE88E8D
+:10CF1000DF43DED9F3237C0B54EDFF3843DED93BEE
+:10CF200098EFA2FBAB07ED696487E27AB584F84B12
+:10CF3000DF06FDDC1DE67708F437A66F80FEEE0EF7
+:10CF40007AF42DD0DF98BF296309C376A35CFAB8C1
+:10CF500027D9FE66E708D8A8B58FBF9B735EED8220
+:10CF6000F87D37A6673EF2C5BB31D7E4E37CDF8DA1
+:10CF7000E964E2A9CD4A69F62BDDDBB293E57A08D4
+:10CF80008E378AC633E257E2D3884789DF7F039F13
+:10CF9000EFB485CFADB88FC0FB21F68FA31252F14D
+:10CFA0007C93CBD9B28864F1BEE87B396A2AC6FB90
+:10CFB0000E223887565ECBCC78DE6EE7783A59C5BC
+:10CFC0007C88DFD3380574781BFC7BCC3CDC141ADE
+:10CFD00007FD8A4DFB13C271729D4AF7F5CFBF144E
+:10CFE000467EBB537EEE975C68D21AB3D06FAFBA61
+:10CFF00056B9D1DE7C57253F30FBE950F2F8C8AB7B
+:10D00000E0D74DFC9D8352FBA836E929F797CFA5C1
+:10D010007A68FD33C3EF4B74B1F1F720E4BB94970A
+:10D02000FBDD962E362EAF257DD759851D00FD0CD4
+:10D0300000399BF47038EDB7F674F4FC88F3837D07
+:10D040000CBD3FD5DC2592F4D34111173734D09B6A
+:10D05000DE5B2B10BF23F096789FFDA08897FB7BAB
+:10D06000BA66CE0678DF721DEC82FE87EB193F07A9
+:10D07000BAD1C1DFC3BFDAFDB9235BECCF7358CEA1
+:10D0800055FDEE410795EE530C65E9740E3F02E144
+:10D090004539F7F62C33EAC990DF3DA079FD6FFBE7
+:10D0A000DD03C69A549C579253614FA65CFDEF2056
+:10D0B000A8625F257F0FA18017B5FA1D84A7A20A79
+:10D0C000785CBE636E9BBF839024DEA9662EAE376C
+:10D0D000E4EF208C4CD0EB9111CE61879D94EAFD5A
+:10D0E0003C4997891F1B9D2DF4C7D5D2BF8C11FDDC
+:10D0F0005BE24CE379FCD350ADD7C3E89F1F116FBF
+:10D1000071FB5DADF9E03FED774EDAA393F1F74F98
+:10D110008C7432FE1E4A925A6AA67720059DA6C0DC
+:10D120007F48A7EBC5EF55E4E3EF55B0FF7774AB4D
+:10D1300036D0ED7BB6AA3FBE5B7AA190CBF5F6F474
+:10D14000FE0D299EFBB341FE3C2AFC47D23F22E361
+:10D15000728DBF9724FD00325ED7379CD3DB773CBE
+:10D1600082CEAFEE511B2251CF1C37F1DF471AD8C8
+:10D17000417B1CE5D38CAC0A05F191C0BC3BE702B6
+:10D18000FCD3FFCB968CF9E9DDF87B912C8BFFFE6D
+:10D190008F846F7A128FE77A265BE17E3F378FDFCD
+:10D1A000DA98CDF701916E27C599176631113FCBFB
+:10D1B00092A767237F1E0DEB89FCB786FB031BF04C
+:10D1C000BDCAF8E07B9568A7A35DDC55D8A5D5C797
+:10D1D000EC76CE874CA7FF33FD765D9C73EFAD4EAA
+:10D1E0005D3EBB364157BFCF5E97AE3C3790A12B1B
+:10D1F000EF7BC4ADCBF7AF1FA8AB7FCD671E5DFE45
+:10D20000DA86025DFD41A7BCBA7C126B7A02F17B23
+:10D210002C3B95DF9F50849FC4C5E931FD9E8E74E1
+:10D220005F49EE3F64DCBB26F8D9B8AFE966E57626
+:10D230007D7522E3FB56BBD89F32FDFE461371EB92
+:10D24000D2AE673E7DDCBA8C576FD907897D8EDC04
+:10D250004F84C4AB7B107E19AFDE4277F17EA8917C
+:10D260005FBF167437CEA39B95DFAFABBED74AF72F
+:10D2700084247C46B8D40CCEDF9BED6DBF07F55DF2
+:10D2800036B713F2BB7BCF21BF3E0DE28AF0D96ADD
+:10D290003C7703FE9E40F5AFADEEA5AECB8F37BD1C
+:10D2A0000F9FCF347C37378BDE5FA57B81725C7339
+:10D2B0000E1FF75C1FC1E786F1A647F3F838166D1D
+:10D2C000A57B2DED8FC7F19A6065CBE8DD2A71CF84
+:10D2D000E38E55B50FA20B759AB5C6C21F1EF05B43
+:10D2E000D08F367A38D889B9E85F7DF85107D86988
+:10D2F0004F579AC92F1691639FECEB1EBCB7D30D05
+:10D30000F669C827A391FED0EF923E3C3E3D0B6DDF
+:10D310009F0EE47F6FB96F61D3C97F46F2BF0DBE28
+:10D32000237E94F3F89FBA7F21F9D78827B92F6716
+:10D3300042AF75177049FCC97521F127EFBFB8EEF0
+:10D34000B478373AE81E4D01C6E549FAADE9C3FDA8
+:10D350009CD3053EB01ECAA3F6EA8D54B3A2F1BC1D
+:10D36000A099B9A29D97F19BFF0FDD4B21FCB777E8
+:10D370009FAE3D39D14A3EB473BFAE3DFEA47F5748
+:10D3800071CF2E444EF07829410F7F7713C525DCED
+:10D3900017A95FC70FE570FCE689F504FADB91ABCE
+:10D3A00097130CCF3FAA97AB424ECC6DF9FD10FC02
+:10D3B0003E67B985EC6EC6BC8F619CC65FD658E8E7
+:10D3C0009DC7A11E46F6CDCC758A7F8312FCDDAECB
+:10D3D000429FE19D16F527B20FBF5FA538F1F71FF9
+:10D3E00066ADD497CF73F0DF1D99637CAF469EC7BF
+:10D3F0005D665F5F9523F4BB9BB9C92E137114451D
+:10D40000A28ED12E6BF6F3F346DC97ABDC8F45F1A1
+:10D410007752EFBBF0BC2BE41D16C06B7806EAF127
+:10D4200065E636E3225BF0DA4EDCC7398788FB70AD
+:10D43000F03897E65D61FC7C589EC389FAE77C175B
+:10D44000A91CEB636FE77379FC8A3C7F339EEF3551
+:10D450003B4C743ED5BC2B92E21CF0DC2B1AF8E15D
+:10D460008C6967C7812941F8B40655776E644CB55D
+:10D4700025BB693FF95E776D5B0EC6E99BDD7637AC
+:10D48000E4EF771CA477BC460B3F9811DE96DFF1E2
+:10D490001BCCDFD569F6717BB7B980BF7702F291FB
+:10D4A000E17A92F11CE3185877901606AE2578AE13
+:10D4B000F6FC6BC2A55C7EFE7B6910B5D7565E4B51
+:10D4C000F96ECB1EBC13EF194DAA9E67C150808622
+:10D4D00027168F0C87A60D5DFD4BC3916EC3943646
+:10D4E000CF2FDEC9E17AA5C1706F41A6D7F5E17AE9
+:10D4F0007532C6E6F40F89E75AA2D07A58A83019D7
+:10D50000DF45F25CE62FD688FC489E5FB49CE71BA3
+:10D51000C4EF2A6C11FE169C37A6386FF40B6C17FB
+:10D52000FE189C37A6386FFC8EF20BF328BF308FA5
+:10D53000F20BF328BF3045F985DF67326F72AECA50
+:10D54000CFEDF243D6079EDBE587D847786E179A72
+:10D55000C773BBD0FA786E175A8EE776A1E5786E5E
+:10D56000179AC773BBD0FA786E179A67036F0CE6E9
+:10D5700051DE79C6E9F213C0FECF0F59DF786E177E
+:10D58000DA3F9EDBE9FAD3EED4B5BF9D55EADAE384
+:10D59000B95D68FD19958AEE5C6F86788776D6DA74
+:10D5A00038E29F7D295E5B1FA0EFFF89F8E7DD165B
+:10D5B000DC2FAA75F3F9BE2DDCCDE95C53C0E96E12
+:10D5C000E2F72C94A6A944E7C5569E1FC9E3BC8D7B
+:10D5D000FC83E762F9167E2E86299E8B618AE762BC
+:10D5E00098E2B9587E0F7E2E86299E8BE1773C17F4
+:10D5F000C314CFC530C573314CF15C0C533C17C319
+:10D6000014CFC5B01D9E8B618AE762F81DCFC5306F
+:10D61000C57331FC7E1CCFE72C41B8D09EEFAEDB4A
+:10D6200057021FEAF6954E5D1EEDF9D0FA68CF87D6
+:10D6300096A33D1F5A8EF67C681EEDF9D0FA68CF8E
+:10D6400087E647E5B8687DA15D1FDA0EEDFAD07C6C
+:10D65000768DEF0DF49D8D59F7CD614C1B2295A76A
+:10D66000151019057DFC93F1FCB2214C498E01C9BE
+:10D670006959B279723EE435114799C39A4CF4FB6B
+:10D680007BB879C4388700A3B8D5EC1F13A97CAA4E
+:10D69000BC7F87FF80EEB9BB18FD1E8D3C5F97ED08
+:10D6A000DDCCA9622AEB07F36DD7338E2FEB91FC0B
+:10D6B0000C81036F5A63BC4FEE62471EC6CD6E11DC
+:10D6C000BF8FBB65298FB736F2D562612F6D31ED03
+:10D6D0003C88F7699A0A15BA779D6E66472C798857
+:10D6E000A78A3CB42366F789117AA9E23AFC1D3176
+:10D6F00009B7F483829CA0FB89839BEA4744433F9C
+:10D700009A6F18FD3ECE682BB71FB01DEE2B7BFB2A
+:10D7100014CFC610FE5E20EC71CDC7C77FEE99B165
+:10D72000BC5D386FF7DC335184C7B1CB148A3B1B27
+:10D73000BC9D79F01EF43D429EF6DE1E5071BCC2C7
+:10D74000657C3CD96FE1BA64BA175AC81AF2F15E27
+:10D750000BEBA73094DB126F30BFC338BF74582A6D
+:10D76000E8C7BED2FB5443FAC58CC4784456C7E818
+:10D770005DD131FD3ED4CD97C83E80FA25BDD6D3CC
+:10D78000A7D03BCE637D4B96225B8CF1DDF946073B
+:10D79000ACBF89B9535CA48AE8FEB184A79767A798
+:10D7A00009D422CB62F5A63005E9CD0EC585F00F70
+:10D7B000ACFC8948EF5CB785DE551E67765AE89D5C
+:10D7C0008E76E2752E3A64BC8EC15E30C4E5542F6D
+:10D7D000FE2C19FDCD0B234DE43759B83B82EC06E6
+:10D7E0006DAD42724DDA418522DEEFE2B2373A4C3E
+:10D7F00046BCEFB4507F325EA72CCD9F6CC2FB09B4
+:10D800009D37E4C4AA64073C8FF2F0ACEFE55B07F8
+:10D8100062BDE5FC5DD18BCB76F3DF1915E73BF2FA
+:10D82000774B678BF8AFC26C6F34C6C3C8DF4793C2
+:10D83000F764E4EF924A3F4FE17B7DDF44FA16AE96
+:10D8400017EF7EAF2CA4FBEFC6B8AB1261FFCD5F24
+:10D8500066A1B8ADF906FBB044C4655DEEF74A0FAA
+:10D86000F531D887F27772441DA676F914FDC2F21D
+:10D87000DEE7340B9703D376323AAF9AB664840965
+:10D88000DFAB66BB39FF4C5BC2ED9C69AF7AE8FE4B
+:10D89000A6B41B3F10F6CCF84B4984FF8F85FD32B0
+:10D8A00009E35501CFA31BC2441C5B22A5932FF1B2
+:10D8B000F8D5F10E2E0F1AF6F177379A7D366E579E
+:10D8C0001D66FCDD38037F8E33FB4D78A1D13D18FA
+:10D8D000F813F263D01E82FEA6A07D1487FC9E3250
+:10D8E00092E2210B14BA4764E4F7D1968A3730DE0E
+:10D8F00076F466E6F6B1507E073EC6FE7C0ABDC7EA
+:10D90000A0897DAEE46323DF4F8F10FE2907F73F28
+:10D91000B5F829D056C547D47D7F9B8CF1C4D3D1AF
+:10D9200067D899A6E1C1B8BDC82C5EFE8F17FF3637
+:10D9300079196E7ADAF15BA8BFB4123E34F9EE447D
+:10D940003B7E04F41FA0BCBCE3AE5CEBCC1079F9C9
+:10D950007F018165E5A90080000000001F8B0800A1
+:10D9600000000000000BED7D0B7854D5B5F03E7340
+:10D9700066269364122621901048980422A906383E
+:10D980007941401E87C82358B40349143009C33B6A
+:10D99000A878236A0DBDB499908001C11B340AA2F6
+:10D9A000E880CAA5966AB4DE0A4ABD838855EB03AF
+:10D9B0008354EF6F1B86A7A0B546B8D6F67E5EFDF2
+:10D9C000D75A7BEFCC9C9399006AFFFF7EF76BF8E8
+:10D9D00074679FB39F6BAFF75AFBE4ADFCD28CFC2E
+:10D9E0007E0C7F2CAC3F630B5CF43B9BA2E6A50650
+:10D9F000F3185BB12E27953919FB067F26F62C17F5
+:10DA0000FEF54AE6EECB584D9FE01D8AC6D8208D24
+:10DA1000E993D3189B83838CA5A1022C97B1B9A25B
+:10DA20003E5D1BF2410B8C5713CFEB69ED8ED93E57
+:10DA3000A82F7704A7AAF0E89FF2EACA065818EBC5
+:10DA4000A3BA198375C5D8BCFAC02CC66C7BF20387
+:10DA500003E1919AEBA2E7CC1A1CE04960AC7A434F
+:10DA6000FBC6616E1C17FE57CC5895BDD5C67020FD
+:10DA7000E6B77986C3FAF298EE77627BF8AF88B1A1
+:10DA8000E3EB9E7F6ABD125AFF711B9BDD1E617F17
+:10DA900093340BCDB3B38131F730C6763538A87CDB
+:10DAA000B2C1C5DC318CED6E48A3FA530D6E2ADB92
+:10DAB0001B72E9F9B30D1AD59F6B28A1FAAF1B743D
+:10DAC000AAEF6928A3F285060F3DDF3FD05BA0C116
+:10DAD0007A1FB0E8C7EE82FDA5ABAD8C0D8135B6DF
+:10DAE0006E66780E8B700B6E829FEE18C598971F2E
+:10DAF0000B1B6CD7ED2C85B1A6758A6B35F4F33A08
+:10DB0000EDC79444285B9440CC0868E09BA207735F
+:10DB100079DB6FB2115E1C8E2CB7EBC127A05F4D75
+:10DB2000839DAD87478F5EC6741CE7D19FD8FDBE2D
+:10DB30002C84DBA1838EAC101C3FACBFD7061881B0
+:10DB4000C797E3867673EB62B5F5F0FEAD7C4F19AF
+:10DB5000AE3B3E4FB37B016E19F98CC6BFAE9FE75B
+:10DB6000871A94CB37EC7FE47D3CC77D59762FE054
+:10DB7000CFFC3DF96BD3DCD8CFEBC17EF39D2EBB40
+:10DB800007FADDD29C6477231EA4B2BAF63C9CA7A8
+:10DB90002B73564208FEB59A42EBC82AE0E37F8613
+:10DBA000E744ED5A6D330DED2CD40EE0A63BFA8719
+:10DBB000E09461653E4B01C2CBCB7484D700A621B3
+:10DBC000BC06C2F39802FE3E3639043F33DCEC005B
+:10DBD000770BBC1F08A5BD2004C70C78AFC2735BD0
+:10DBE000EEF1392C1BE1C6E67922E0CF83B87E84C2
+:10DBF000FB6C07D1D562073F4FA0ABA9A980872B4B
+:10DC000036292E4003B6C8E9BE7E0CD417BD666324
+:10DC1000ABA13E23D96D1F00F52E38DF1D505F707C
+:10DC20007BBEDD0DFBAEC2B380752CDA3286E86DAB
+:10DC3000911FCAC2E87479C3A603197B117F02BA87
+:10DC40001DE964914BB727E785D16DAB427461AE96
+:10DC5000AFD3545A77156393117ED5B767D9173868
+:10DC6000B1FE9A6D451EEE8BC341F68376016C378B
+:10DC7000239BBD8AF4D505FBDA91C5E72B081B7FF2
+:10DC8000018E1F363FB49FE781FA7D5A028D37DF40
+:10DC900005FBCEC2D245EB0438109CBA36C2786E72
+:10DCA0009A87CE6361C06FD3703D569817EA735D53
+:10DCB0007E1BCEB3A039DF8E7CCABB81CFE36D491A
+:10DCC000B20F87FA7CABCB9E81F08B0358A4D0FABD
+:10DCD000FC3BE06816015C929D380F9B37CBD91353
+:10DCE0003EF3C57A17B526D9171B9E6FB2E17900AE
+:10DCF0007FD323F18D83E2DC17344FB233EC6FD541
+:10DD0000ED1AAE47C0F7D4ADB1EB591FE8DFB6D975
+:10DD10009605F57F13F87B50C07546762047C17D88
+:10DD2000DF1AABE13AE7B85A697FDDF0BD1FE001C9
+:10DD3000CF17BB3C045FC00B1F03382C6A339E67B0
+:10DD4000683D1CBE8BDAE613BD2DB17AEDAEF075E1
+:10DD50006CD99FA3005CE6007D2B007FE6F2662273
+:10DD6000BE9CBEFFFA4CDA27AC13E19AA0B9A7A675
+:10DD700015119E101E4B7CA929E4F42BE7FBA3662A
+:10DD8000A5F9FE28F86774BAD45F4D43BA84F35DF1
+:10DD9000ED8E4E977664DC30AF7D91E26F527AD291
+:10DDA000A9A44F4997924E25FD3E62F304D29410E8
+:10DDB0009FA9E9C3EA9E8D00A78C7C7E0E73C5B92E
+:10DDC000025C5F41B8CAF7F67CCE8FAAB28DF48EA2
+:10DDD000E3E1B8E704BFAA2A0DE4DC9A176A2FE74B
+:10DDE000AD4AE6FD10EF11DFCE8973C7F62BA8BD53
+:10DDF000E063825F2CECE617BBD7F4477EF18CA280
+:10DE000021BF58B1F140C69D00B715BF8CD7100691
+:10DE10009FDCFCC42D03B251BEF9E9DCE4BA16FF65
+:10DE2000359FF8C412219F170522F38BEB73BD6A4F
+:10DE30007E71A8BEE8BE5F5EE6E5FC2680FCE60FCC
+:10DE4000BF7CF1C85877489ECAFD2C6879D736DF69
+:10DE5000190E3FBEDFF5B9E7E6E3792D74DADD2A66
+:10DE60003C5AD83C9FF82F4B635A8E123A7F335E50
+:10DE7000CC6F5674EA573FCAAF7E8F7C7AE18699A1
+:10DE80000CE5943C379898B15121F92AD77F593E37
+:10DE9000A7DB1FE4F3FE73057ECFAD9D641F908268
+:10DEA000FB9D5F886AC51CF17CCE22E3F3EE7373A1
+:10DEB00075F3F9B5482FE7DAF9B99DDB6023FE73F6
+:10DEC0006E77829FC1FE3E59F1FCDBD741BB8F1FAD
+:10DED000D89E89FA4AF8B9B1427E6E582E8573638E
+:10DEE0007D239EDBD8F0735BFA283FB7854FBDF5E5
+:10DEF000C717DCB45FCEEF36C6F8911F2F687F8658
+:10DF0000CE714ECB265B16B4BB3A3F8BCEAB9BFF9C
+:10DF1000D7E5BB18C0776ECB761BF289AB251C4CBE
+:10DF2000F400A5CEC2E80CE592921CD2C7647BE453
+:10DF30008FCFC03CB7DF1A9BC84686E6B92D9FF34A
+:10DF400085857549C938DFC2BAF9F7B01121796002
+:10DF5000DEE789584E2F0B603CA4DB1393B4CC153D
+:10DF6000849F968872F74681870F01B863011F0668
+:10DF7000C6B7FF1CE130F09FE234E41F438706FD83
+:10DF8000382FE237AEDB0EFCD301ED86DE1CFC1C25
+:10DF9000D73114300CFB6199904C25EB0FF51DB077
+:10DFA000EC1228B3555EB6E6733D09DE07F03D4B33
+:10DFB0000916E3FE257E9BF1D7CE1E6FC9463E961D
+:10DFC000C2B42677085FE538125F253E47DB5FCB9A
+:10DFD00045EEEF441687A73D0EF6977C09FB0364D8
+:10DFE0002D490EED4BAE0F7478DD82FAE33F0FDF63
+:10DFF0008EFAF389462DB3CED9DB7EDBA6F48FB043
+:10E000005FF33E25DD2C72709A06BAE98376C7B9B4
+:10E01000D6217D50EE9C5040BE41BF13B7C65A700A
+:10E02000FD725FA897B318AE9763897A391BC6F55E
+:10E0300072ACA35E8E25EAE5F43C3F99CB23164CE7
+:10E04000403D13F401CE0F029C4E3AEB87D0BEE464
+:10E0500073A91774BA8209C961FCFB649D909B2C5B
+:10E06000B811E99BD50F614FC0549DAD27122C7993
+:10E07000889F7C7DB2DFEDB62EE2872CC1EE7E025A
+:10E08000482EFEF677A7A4C27C8BDBB2F215E857C8
+:10E090005D5FD8590FEFAB9B5335E41B8B9DEEB5FD
+:10E0A000281717FBB234948BF16DF9A7B7C0FBC5E5
+:10E0B000CD5768D8FE76857990BEA49DB08475FF53
+:10E0C000909DB054F0B5A5C82F015E4BEA0F0C75BA
+:10E0D00041FF255A6C3ECAF7A55BB89D30C3C25AB2
+:10E0E0001494C34D9EA9C8C7BA1E5434D437D9C39B
+:10E0F000C05F1D21FEFA7EAEE7B7C867D857807FA4
+:10E1000030FEE5288355DC57BB8EFB60A08F3CC1F9
+:10E1100070DD1ED2EBA70ABED1D9762CC19DC7E116
+:10E120008DFA3AF3EA16E4BB2B845C1B6CEF3A766B
+:10E1300017EA3309166D07E797EFB8719FAFAB2C5D
+:10E1400086E48D682FF8E9E09F953890BFAD48C808
+:10E150004E25BD6A8B4AFC51E24FAD58F3E2EDE526
+:10E16000FD116F16C37B94775BF121B0D0B56D576D
+:10E17000F547BC5AB469CA033E906399028E27AD35
+:10E18000C199783E67B6A72637A25EB8BCE93206C9
+:10E19000EF176DBF2B13CB33DB636723BF9FEC9A65
+:10E1A000393909F6BBE4E1A47C354C6EFC45D0E37B
+:10E1B0008DCBAF4A457BE0E6AF0F3CE2023B6E31D0
+:10E1C000C01AE1FE457BBCDF074D6E6ED893A902F5
+:10E1D0008D7D1DE3FD1CE1799365DF756390FF2B59
+:10E1E000FE9D03A8BD3BD5D58B9D7D1AED50C0E7A4
+:10E1F000E53FFB80C6F9D4F2E6B573A0FFCDCB7F37
+:10E200009588E3DC74FFE1512E78FED650EF7FA3B2
+:10E210003DFFB1B27DA70B05D396ED23506E7F8DE8
+:10E22000765A31E2B5E7BA3908F7D755827BB4F9A7
+:10E230006AF728045F59AFF6F7217DD61B60761781
+:10E24000962E46FAF21995D5A33E20F51AF93CA967
+:10E2500080C3E54C9FD64CC48B653B3767A25C39C5
+:10E260009BC0EB553BAF7F03F994F7F118AEB75B5A
+:10E2700019E9C90B7D5CEF66B540AF0342F30F2C83
+:10E2800088A7F1966D2934C843D04BE8F9592B2B58
+:10E29000C3750C6EEACA47FDEB436B60319EEB879A
+:10E2A000A0D7A27DFB17C1C73E6C55A7E2731F1014
+:10E2B00012EA231FB6FE2A61A833A4C72514B507A6
+:10E2C00090CF2D7F2EA940E52845F8754BB75FC448
+:10E2D0003975600AE9632EC4D3157B0F4E65BC0EF9
+:10E2E00082303A3C6F147A5877FDB967C8AEBB7973
+:10E2F00037D7276E6E7FE6D57418E7963D429F109C
+:10E300007ACA7241CFB73CC7E1B2FCB963F685E186
+:10E31000F6486EF2DA81A0094E78F6F2D9F7BBD151
+:10E32000DE56C8AF52A965CE691C8AA5F4977491D0
+:10E330007EB83EB783ECF2E5CD62BCDC8EB5D9B4D5
+:10E34000DF997DC3F5A1890536EA27FB033CA8DFE9
+:10E3500097B1892390FF0596C7B5A05CD76F715A16
+:10E36000B16C5AEE2439FF709D25D70AF0D5953847
+:10E370000DF5B87A076F7F675CE20E2CF7C5F1FAEE
+:10E3800097B19924A7BEB4789E5902EDEE540FC5FB
+:10E39000A2FF6300EB3A60817A493FEF7505306F69
+:10E3A0002A03EA51517E04147CFFD96F3E2AC475BA
+:10E3B0004C181C3CCF6069B6C6BC3993014F6A0A41
+:10E3C000C43EF3828588EFFD5EE6FC7A9B8DB5A0A6
+:10E3D000BC63560F9B05CF03C8BFF0FCFF66F1235B
+:10E3E0003FDEA7041E0BD7BFEE1378EB8971B6286A
+:10E3F000B0CEC7B3BC4B711D3F526CC35175616E3B
+:10E400003507C7FFCCC6DF4B3DB65430E10C618FFA
+:10E41000D9D3D39CB8BF26012F45D7593DAC6375DE
+:10E42000DECB0B115FEEEE72B01898BFB42B8EF4FA
+:10E43000DA8CF432926F4D022E8A3B05650E7B39E1
+:10E44000CFE28B81F5DECD1C7E6CCF1C26FDD71272
+:10E45000AB633F65DF6FFF86FC7EA0FAF9813ED09B
+:10E460007EE09D8AD6046D6ACE9DDEF60E43FBD912
+:10E470009F8FF0BBB39FB7B100F6D779AEEC98177A
+:10E48000CEFB6E57BB43CBE3E385EF63DFCABF250B
+:10E49000265B42EBFBACEBF42F9F2FC2D24172A85C
+:10E4A000749FCAFD4DA6F57C96E6B6D23975390241
+:10E4B000166CEFB4F81505DB1FF800D757EA7006A5
+:10E4C00054D4E31DB63F85CB19762823E9F41524EF
+:10E4D0005AD837A02CF46FE2E737A18FD1BEDC59B0
+:10E4E000C0EDA49DE29C247C25DC985B67E172E68C
+:10E4F00025E7CE6AEEC7E274FC4FE2F9B9BF669336
+:10E500007E716E1FE81911F44E591E463D03F487C3
+:10E510002FB3F5A7106E52CE564AA92BE4B02AC6E7
+:10E52000AD14F0AA745A387C2A4CF0117863C60BEB
+:10E53000F3B9CBF3643F3974B04F169DE3F07F61BC
+:10E54000747E7B111F3BFFF6E61A203796AEEAC7B2
+:10E55000BC59FF13CF2F103B0CF58AFB2DA457A0FD
+:10E56000DE877AA2E41F5EE40323E939D703731937
+:10E57000F18D1A358EFC8C66BE21F985370ECA11D5
+:10E58000C8375A891FDCA9761DB428213E31B82C22
+:10E59000381CE5702798FEF83E6869A7E7DF146429
+:10E5A000137F18C40E0D203FAB35588C7AA0EA7843
+:10E5B0006CDB4910296DEB387D34D9FC0F2E41FE00
+:10E5C00050E9D450AFFBCC6FF1D9609D6D499C6F81
+:10E5D000B42D4B2779FE19137C64B69DF8C89516A7
+:10E5E0008B8FECAD39E9646F75B7CF71937FF5D739
+:10E5F0005FAB976DC1F7331D2477DB501E43BD6DB4
+:10E60000E3707AFFA2E44BCB385F6A9BA90F88C303
+:10E61000F733FB5B70BEDD29DEBFE1B9A7ABFE9F20
+:10E62000C7A23E79531C7B029EB765E90350DE3ECC
+:10E63000A078E62CC6FEC3F9BA8373E29EDAC98FCE
+:10E640002780FEA4CEFA841DE17E6FE9471FEC3BD4
+:10E65000F620C2CB57CA72519FEF44FC1C193A2FC7
+:10E66000B0CA597D72E8DC524CE726F1D56783F3D6
+:10E670004BE1E7B75A897E7E29E2FC947AC06FE2CB
+:10E68000FFFC7CEE54397F672F696E2CD5FEDED4FB
+:10E6900042585FD3AD702E2410837720BCB6AD4CAA
+:10E6A000D0711F9D1656DB1E816EB30B85DF09A549
+:10E6B00031D0C33C410FF324DEAE32E16D7050D255
+:10E6C000E97881B7D0FFC578CF509CF753E5F028A3
+:10E6D0007CF8E67FABB323CD33BC90FB0BF68356BF
+:10E6E0005A48F2B5D4A0AFBE99FF5106CA29F6D553
+:10E6F000814128775F49F18C2C04FE113BB48BFCDF
+:10E70000E69D03BA6CB8CFCE391F67A05E34AFFE6A
+:10E71000B7445F17BBCED5F135361C27A922CB16DF
+:10E720008432B522EB20E2CF91E931EE98087AC825
+:10E73000FEE9C33250FFEDA81C96817CAF030EF0BA
+:10E7400010AECFEA4E40FEC7F654131FAB147CAC9C
+:10E75000A362087F2EF866D8F38D45A8D73A2D5AC4
+:10E76000B8BE602ECF02DF0C00DFFC08EC332C4F6C
+:10E77000817D1600FDF504D867583F06F6199647C7
+:10E78000C13EC3B2A341A3F74D1543F604E19CBFBC
+:10E790006851687CF4DF46D28B6F7C5C6501091F91
+:10E7A000F8AFF6E17816C80DD597B4F535D4176DE6
+:10E7B0001868A82F681E62A84B3DD2BBEA0AC3B8EE
+:10E7C000E565858676ABE347D8F05C93CAF239DC21
+:10E7D000CBF209EE1DD74481FB35A309EE87A78F45
+:10E7E000CE40781E46B8A3FD66D512F01C24DC6727
+:10E7F00089390F9715F2E702EEA1E7E5BDCAA94FE7
+:10E8000010DE31087707951F21BC09EE1CDE2710AA
+:10E81000DE3108F75C2A8F22BC87E1B800EFA20B3B
+:10E82000C3FBE6DDAA010E373E6E8477EDC37D4D56
+:10E83000F01F6880E3A20D430C7509EF05CD467803
+:10E840007B57159ADA31B601E0508EBF001D1C2EA1
+:10E850009E467129AB83F9E281AF2421BDC1FAAD97
+:10E86000150AD78FE0A715E87016FE02F46575F259
+:10E87000F7CD73143FF225D489D0AE00B806E281FB
+:10E88000CECA5D979D42BE743D723015ED7A3F95BC
+:10E8900037B000D167350B527D1EEBCAB443798B7C
+:10E8A0001A588BFEBBB71CDE27919EFF32FDDD4E52
+:10E8B0000589529B3F0CE99C3993C9DE8C764EC08A
+:10E8C00029257F62CE51625FF05381FC1FFA75C427
+:10E8D0008FB8E30E3887CFE60747E1FC373BBC8FA4
+:10E8E000A65868BE3D38DFA736EFB0BEF0FCADE2FB
+:10E8F000D11948FFCCD3CF6027459B6F136E16E02C
+:10E9000030BF0CE0A4601C8EC3E5642587CBFE4DB0
+:10E910003176F4679C5C67237FE5E6F8CC4CC4DB7A
+:10E92000936BA66522DE356E1A9689F83EAB65DAE2
+:10E9300059E4DF53D41935144F6DE578CFD8ADA421
+:10E9400077DD21CEEEB89B6901785F393D41F3C197
+:10E950007EBCBEAC445A2FD39DF9D06EA1D8F7C26D
+:10E96000D6A533703CB9FF051B620CE7FFA3126309
+:10E97000BD92D943789685E76C0FBDC7F357ABFAC4
+:10E98000787BB1A3EBFFB0FD8D57C2C63B5E98907C
+:10E99000827A0B1BCD467FA386FA4783EB970DFE49
+:10E9A000375EC909C155E2D36F0A3D9FE0F9C063E4
+:10E9B0008AB7012D913CB8A5DBAFB52F11E1B7297E
+:10E9C000FEA57BAE44B8BCC7FD1C9BE36B887F7C77
+:10E9D000827C3B0BF9F4F519C130BE20FB07053FE3
+:10E9E0003DF2CBEB898F1CA84CA5784CC773DCBFDC
+:10E9F0007C54D07D47C5F5D57700FFECD8AD929E0D
+:10EA0000D7B1E7FC41F4D374B42B9A00B9257CDC70
+:10EA10008E3DC0CF91DF7A6CF47EFFEE5FD13ABFBE
+:10EA20002F7E5EB157F0F32D7CFEC5560FF117E631
+:10EA30009D6DD8DFDF8BAF5F889F1FB1713CED38D4
+:10EA4000A292BF8DF9F443B9FDC3F0B38CE36763C1
+:10EA5000650CE3F295F39959154007A8E733773130
+:10EA6000DA949FEC29EF47F27283ED38EAD32EF85F
+:10EA70008772DB0CC74A663D1E0CC3DF9B9F83F683
+:10EA800061EB9B85EFC3F0D98CAF2545467CFD82B9
+:10EA90007D9569CFE6EF0FF50FF13DFC09E72F9269
+:10EAA0006F49FC05BE55837C0DF8CA554580B73FBC
+:10EAB0002EC8FA4D5009E32B17C9C736C57F4D72D2
+:10EAC0007073FCD784C7872B051E839E81CF3BAE16
+:10EAD000E1FA06F3CF267A9827F5089B2701FDA4D3
+:10EAE0004756F54DC4F7C79ACB89EE243D99E73BCD
+:10EAF0002AF04FB69B67EDB26911E4A17795117FBB
+:10EB0000D8AED984EF7798F02CDAF8E6F6729E79D1
+:10EB1000A678AF799EDB8A84DED95E7D51F3211918
+:10EB200076F727FD362E84972AF2812F1382A47F51
+:10EB3000CD36E86547CB46935E76B8E27C44FDEC83
+:10EB400068C5F9B74623BD95D904BDD752FF72F108
+:10EB5000DEBC8E8F84DE704AF08F1382AEE57B754B
+:10EB6000FB9AFE7311EF57A91AF2AB23330A09CFB0
+:10EB7000CFF82B69FEA3152AF99BEE2F9A3217FDC9
+:10EB80004D723D72BEF26BCE27A03FED0B8017FA9F
+:10EB9000C7CA6D5ABF48FA85191ED1C695F803FA3F
+:10EBA000EC11DCE761E4A3F8D66B84D361EC0FEFE2
+:10EBB000676D5729DE6686D381E9C3882F1DDD2561
+:10EBC000F827C015F5F0DA878DE7BAA42DDEC46FFB
+:10EBD000FA1ADECFAAE47A99E4D7727D87570DE955
+:10EBE000179E3775A1F396E35C2CBEDC28FAA3D8F8
+:10EBF000FC86E46FB2613CB0144DF3659BDE5F6E42
+:10EC00007A5F60AC5F241E1F13F823E5CFB158ADC7
+:10EC10003A521CEFE8D531B5E1F9099D45DC7FD3C7
+:10EC20005924E2DE9728B7FFA328B2DC8ED65FF224
+:10EC3000BDA70B3D41E4772C504EF1EC8BE57361A1
+:10EC400072FE4C11D27950B1637FA957DD58C6E5E9
+:10EC5000C2E6F8A7284FE3D346AE17ED6F8C213CF0
+:10EC6000FCF335FCFD9FFFED23D2A70EECDD9C18D5
+:10EC70002EE7255E9EDD332D11FDC2272B1E4B0C8A
+:10EC8000B703E4FB8F2B1EBB672CD1B7AAF5762EFA
+:10EC9000DFD61EE8A810F680D0176EB2B6FF3FB1DF
+:10ECA00007CC76C014F5E144E47F667BE0AC5B4FB3
+:10ECB00074117C04DD09B972A380CF9F6D7A22C5DF
+:10ECC000E9761572B962C24F0987D3120E1BCA7B4F
+:10ECD000C59B53422EC8FA622B2378781D8CF465AD
+:10ECE000D6A66818FFC234951238974315F98FA13C
+:10ECF000FF4AB67FA65825FC96F31CD9A6B4A37F7D
+:10ED0000E5B7CDE5D57760BEC38C78E2ABB2FD1236
+:10ED10005FEFF2EBC8C6A46B711EEF1655C3475EDA
+:10ED2000DFB17EE1EB977A9AB9DF326BEB45D9D14F
+:10ED30005EDFF644B46F83629DC1FDB1767742CF4A
+:10ED40007E18AFC1FD2F9BA16A8DB0FE651BF8BA7E
+:10ED50002A7DAA960DF5DFB63E762DD2C1897A9B23
+:10ED600085DB072E039EBFD95AF836B63F59C6E554
+:10ED7000CAB18AAB12310FCEB7C5A6E5B87BCE5764
+:10ED800053CCF3D2CEEE89B1A0FFF46CBD8D05C893
+:10ED90007FE1217BF9C88621549E45F871FB9ACE0C
+:10EDA000FFC662EEE73AD1BAB03FA72737AD43E2DC
+:10EDB000CBB15D6A993F02BFBA519CDBA9AF9E26D9
+:10EDC0007C7B755739C9E313157C9E53ABB44484DF
+:10EDD000E7EF36A844C7277D7CFCFD7BEF4A1C0B80
+:10EDE000FB385BC1F77576CF9D6F8F817D062BA4B5
+:10EDF0003CE6724AE6F704370CA178EFA7CDDCFEBB
+:10EE000096F42EE3E157AD3C9248FDA59CDB3DDB3B
+:10EE1000B0FE8E5D27C80E3BBB0166E372CE998FB4
+:10EE2000F986BC3B5B32C378BEB32AE20DF5792D7F
+:10EE30004679D6B897F32BB39EBB7803E8C1E89721
+:10EE400032D9790B1B0B134B907E510FC63C932785
+:10EE5000CA0FA6E23EDAABA95D85889B2D6C8B318B
+:10EE6000F083CA66A35DB7C064C7F5B0EB4CF24847
+:10EE7000C2697914F924F5B90E61AF1CB579AA23DA
+:10EE8000E553B41773F9330FE8370DE3444CAFBCC7
+:10EE900052C07B3DC2C7DEF5450EE8D31DAA361E23
+:10EEA000F5EA1E7460D203CBCB8CF0659A8F95483F
+:10EEB0007F849BF4FBD3A8FFB7F41572DB0772289D
+:10EEC00001E592FE6C31CA958BF51F5CB47E5E2322
+:10EED000F4F31A837EDE814DC2FAEFAFBC9EFC5480
+:10EEE00047AEB99EF4F523DD7E2A8FC14F25F5BAD2
+:10EEF0002333CA0DFA67D8F33EBDE58B47D3378F6E
+:10EF0000213F263ECDE5D25A6147360B3BF2C80C75
+:10EF10006147A630A223AB556791F8D9A5EA6F0BDC
+:10EF20009A8D72C9BBCA683F3E3FC97B16CF252662
+:10EF3000ED72C3739BABC0E83F34E1E740C6FDE729
+:10EF400077A12F00E0DE54C9F34EF139E6BF48B98E
+:10EF5000C4A03DF28BCA0D97FBD7F3F73EB500D3A3
+:10EF6000E518AA74D4DECAEBBAC2EB3EA778AF8A22
+:10EF7000BC371BD48F6569B351EFC2BC9EF864FEE9
+:10EF80001E516420E075627248FEA15F3F9687D6ED
+:10EF90007D89D06F5045D62B48D798EF735901DA49
+:10EFA0008C3C2F2C0D5DFA05347E00F37A824D13D4
+:10EFB000C9DF5CEE48E4F179B0A37BC7BF46AED7AA
+:10EFC00095F5A5C90659F97AA2E2B36877217C0EB6
+:10EFD000D3C3068C223F9A85FC2D9BE247D8107F35
+:10EFE00067393D190807C07792AF1DBFB1131FDE07
+:10EFF0005FC9FDB01DD3476FBB1D9E8F78DA49BE38
+:10F00000F48EC5D20FDE95108EB747579DB0205FA6
+:10F01000FEFD1EA6611EE3D1DD5507DF80710EAC3B
+:10F020005AB8B118E9E84D95EC06B3FF76D2D3E3B0
+:10F03000C8FEBAEE1A95F2BB0F97A90CE5DAE10DFE
+:10F0400071063B24E4D755093FBED867A5F768EAA7
+:10F05000E462FE15FA37314FAB8C9FCB0B829FB524
+:10F060008B73FCB9D063760ABA69137473AFA09B33
+:10F070007566FFEEC39C6E0EEF01C301E4FA3B33ED
+:10F08000169692DF7A0BA33874D674757D11ECEF67
+:10F090008A18CD86F09B34239FC3B342B160FCA68F
+:10F0A000BC2CDF86F47E455FB70DF96879D94CAA90
+:10F0B0004FAEC8223B7FFF2A908F68EF2768194820
+:10F0C000974367C4042C89683716129FB8F28CC521
+:10F0D000402FF9813803DD5DFE78B2E1FDB02DE906
+:10F0E000867A3F4FB6A17DDF32233DC60D2D30F22B
+:10F0F0005DC6F54209E729EA38F2731D0DC9517A58
+:10F100002FF511E9AF93ED015A06BED622E4C808E7
+:10F11000A8633EDDBA8A2607E64D7CD16ED5F8F8A5
+:10F1200055A41F38B29E73209D606815F3AB5AA496
+:10F13000FE29FCF74C67A6756D6018673D5AC60836
+:10F140009F62873205F5AF3671DEF7897981AF4E60
+:10F15000B2919F8E9F63DF191E6AC73C46FB200D4C
+:10F16000E9AC00F184F7FFB9E8BF53E0CBD1B2C7F7
+:10F1700056C7213ECC66A46F4C516F5E8DF1C4A37F
+:10F180003318D1497BE0E5385C3F8E83F9812F4409
+:10F190001BA7E2571FDE82EBD965A771CA1F671351
+:10F1A000104F2EFFD1B18FDF46F06D711D88653D88
+:10F1B000E5F088C7750D81937B86056C540674E471
+:10F1C0003FB9670EE9180FBCFCCFBB3E7E8AE1BC9D
+:10F1D0005C2EB408FC36F3D75F3CF1EB05289F7F2B
+:10F1E000B1736BC10750FE60F583E9F550FE7CF505
+:10F1F0004D5B6F7787FCA53BAF5DBAA30DEAC37E7D
+:10F20000F8D3279F43BCBAF6A7FFE7395CEFB57F79
+:10F21000FBA313D67F59530243FA96EB33CF93C621
+:10F220005A148C8B221F25BE6CF5517DBECF68FF12
+:10F2300098E53EB6B702FCCAEB7F41F1E534D1FF59
+:10F24000F03577292ACCFBC17CCE573A1ABADA2698
+:10F25000DBA87D00DB039FA47CCD818380AD607F34
+:10F26000BB4FC1B83828481AC67B07C07BE4E7CC3F
+:10F27000ED26FD2A53E2AFE02B78CD81913FD04AB5
+:10F2800078962BE291C87F91DFBF312A9BF8F2403C
+:10F2900027D3F17CCB5EDCA0609EDAFB5EB7467ABA
+:10F2A0004103BB7F32D8C997AB3CEF22B7ECFDB925
+:10F2B000782EB055ABB72034EE2EA1D795BDE8A47B
+:10F2C000BCEDF77739B7939E7FE85A4BB87E58FA72
+:10F2D0008B3F3DFB3BC4AFF9B1845F66BDA543D016
+:10F2E0004777DDE6DE763BC0C7F71B07B7AB747721
+:10F2F00006D9E99A3B03F377BADBFD54C6D3B43F92
+:10F30000223F9F55154F7106195752CB3E5F83F42C
+:10F3100038AFA4AE18F5F7743C87BEA138F607CB1A
+:10F32000EC946FE053E2282F3D5ABCFABF843C6452
+:10F33000AC6E24AD83D58DC6F2FCECA66D767774E9
+:10F3400079D52CCE35DA7B9B9D7923C595FF6B143F
+:10F35000F72336E139D8C2CEC1F9FBB9181F8E7632
+:10F360000ECCEA2FA03C4B876328E681A48AC79B7A
+:10F37000E37FF616CAABCE235C5EA5D67FD980F4B8
+:10F3800027FD163569AC3B6EA6433F9BE8972AE202
+:10F390002C48C3A87FD78878516735A378516AFD78
+:10F3A00047FF8DF0D924C6AF798F8F6FB706F6234C
+:10F3B000BED438DD24773AFB256A78AF897DC5F362
+:10F3C00053D219C747393E13E3E3CA59D8BA53E3B6
+:10F3D000AADEA1EB101358201EF14771D0BCE9AB97
+:10F3E0006228AF55EA57A9F577DDAA8E308CA7A021
+:10F3F0005EFD7E15B7B7D1ECEC1E37CBA057919EC2
+:10F40000655E87ECD769637BD0FE0DD3B3480F638D
+:10F41000E1F30C31D4851FCD58B7A5D90D7CE2FDA1
+:10F42000AFCAFBD47139E04E19C5FD77080FA98F1B
+:10F4300049BDADC7B882DEC3F44B1FF20B9947D16B
+:10F44000AD27D586D94DD93DFBC97C35790E129EA5
+:10F45000D1FA3F3F499F329AF4AC008DE315C3586F
+:10F46000E29D99045F13BF04B6C5F3E9851E0A5AED
+:10F47000A4218F41EA95923F770ABE1BCC0A92DF06
+:10F4800050E6890F823E99D0FF86D149DD79F6A8F2
+:10F49000071D6DF88CE2EF35A887C2FCC1D59F1817
+:10F4A000EEA114954EBA81D66BCA97088BBBD27A5F
+:10F4B000BD826F4E519D94B7D2C9E234E45F9D3E48
+:10F4C000A18FFD219EF431C92FCCFCE11ACDC8FFDC
+:10F4D0007F5462E4FF33F5BE26BBD018A7AAF49888
+:10F4E000E2E1EF4D37F04DC97FEE44379F8AEE25BC
+:10F4F0000FC575DE14FCF26DA107DA591D3D77309A
+:10F500007E7F348EB553E96487A84C645D54BA9805
+:10F510008BF26B929946650AF350D99FD55199C6E3
+:10F52000783E553A6BA772103B446526EBA2D2CDCC
+:10F530005C162CB39946E550E6A1D2C35C14277F34
+:10F540002F21987118E037E37A26EEFD1EBA418725
+:10F5500073EAAC64A17BC04857539840BEB7F9FB2F
+:10F56000E9B2FECE0D3ABE9FC4DB6F7DFEBD87F0D3
+:10F570005E30F01BF1BE83BFEFAEBF7BC324EC6FE8
+:10F58000B3507DA7687FAA487F08CFFFE9D18CCE12
+:10F59000BBAC48DF36BA38543F53A83F1A5EEF3F42
+:10F5A0004ADF1E5E1F5DA83F16DE7F49A1FE44F8BC
+:10F5B000FB7DC5FABFF2BA8BF0F23D9B4EFA2EFCF2
+:10F5C000EC5246717CC39F3EAAF769C2C3DD8A151F
+:10F5D000CF3546D09B1DCF51453AD21C31587A7851
+:10F5E000DE4F30D6198CB7F462FF98E82888FC0902
+:10F5F000F070B8E2DD47F398F889E213F98329C681
+:10F60000B809E03BF95583ABB89DCE58E4F772DEFC
+:10F610000BE139D3C3FCBCD9A171A3EDC38CBF8767
+:10F62000849ED721F4BCF7441CB97BDF416BD269BF
+:10F6300047888EA3DB8756763A9C5FF6D8F79FAA59
+:10F640006D40D7C1FA1817CABBCE58F636DA69BE74
+:10F65000232A433DE352D7DB5638F50CE78B835C16
+:10F66000C867BAE7157CA6137F053DE78A3ED2BE80
+:10F67000D41C1CDEDCEE4812EB6A9A9C7C752EF9D9
+:10F68000F3B95E9F673B34731AAC337503F7AB264F
+:10F69000227D63E8ECE93FB8308ED63AC5C2904F80
+:10F6A000AD917E5E933F6ED3E415AE707FF09A44C9
+:10F6B000BF82F1CBF4402CF743A4307F2CCAD13267
+:10F6C000AD8CF2667CAAAB0CEB55ECDA5CA82F682B
+:10F6D00053DD6530EF81B65FAD403FE0A22A3BC508
+:10F6E000316CFAD4B3DCFFC7F33792059E37AF8B8A
+:10F6F000D10208C77E4EF2DBE6AD2928437BB7C9AD
+:10F70000999C8CB8985CB584FC864D4EED35BCDF79
+:10F71000E17359283F91B9744739E82BDB6FB796ED
+:10F72000211FCF78A628510D5BF789E673B1180722
+:10F7300079D465A1F78FAE2A752C71E23D46B017DA
+:10F74000A03CE03AAEA3FEBE15DAA0BFF19EDAE31C
+:10F75000AD97F5728E89657603DEC66BC67A8CC965
+:10F76000DF6833E905C34A1252E89C47B15178CEAD
+:10F77000239FFC8AECDF794E37F9D54B5B14CA8F97
+:10F7800009EED73251DF3CB17118E5BB34B718FD33
+:10F79000D1C10C9689F77DE6B72AA4AFAACD9F37D1
+:10F7A00062BFC1B9EE0138CE60AD6B802B8CFE1EFE
+:10F7B000FDE98F6351DE35E38535C223C6E342C2DE
+:10F7C0005E95F7CAE7BBCE55A3DEBFA8F55D0FC2B5
+:10F7D0003F49B710CD1CB5F9D3F0FCD74F9A45740B
+:10F7E00089F7B4508FE9A18FFE15D619763F614D88
+:10F7F0004A761CCE1BC25F3D11F77BB2B590F4A3D5
+:10F800001D2DA5741FC03CCEDD0DAC1DF5D6350DEC
+:10F810008EF648FAEFDD999E4CBCBF7D6AD3A4B545
+:10F820000CCEFFD4FE656978DF7D716B0C8B75F7AC
+:10F830006C7F72D3689A6F31DEA3C6795B67DA5149
+:10F840006E4C6B9B6447B8DDDD30FB99F0791E2A66
+:10F85000F5569700FDC5B73E4378E264011FC2F537
+:10F86000DFC7EB99A85F9CCC6111F33997962844C8
+:10F87000B7BF1BEFA1FB29A73222B7BBA984EBE7D7
+:10F88000C11237BFB76E656F2F4D217BD085F47ADB
+:10F89000A2A590E277368CBB0FC1EF567CD580F8DD
+:10F8A0007FBE6AE1074BE1FD9AE9D79DC172A4BD15
+:10F8B0008EF466F67B95E801F442BA27F69F150EA2
+:10F8C0005753581E21EA8FBAC1AFE161687FD85AF9
+:10F8D000D4801DF8BB6DDF69D2C3115FF530FCA584
+:10F8E0009F51429F17F92169A3E8DE1DFDACB9FACB
+:10F8F0003A7F00CAE32D0B1D91CE31FAFC61E3A2E1
+:10F900007E3B99E9B161F383540C905FDBCBE7EB6D
+:10F910006E27DE8319AAD3FA845E6E7EDF4D6F5B9D
+:10F920008CF4B94D9C8FD4CFA3ADF7077E63BF177E
+:10F930003038818644FBB5067AB95C6D5F817115FC
+:10F94000F63EE7FF60D7314F84385788CFC2DAFBE5
+:10F950000BF8013CD7A6CC22FB24DA3AECFE437A22
+:10F96000D68890FDF68334E3BA64BB17C4BE62FC4C
+:10F970002C604BC43240F73962A03FCAEF2FAA6E09
+:10F98000735D1D812E6469E65BF8E30E8BFF98F9C9
+:10F9900004A2C150A98F58787F3D8CCF25DCCFF5CC
+:10F9A000DF935B14D27FD76FE279145FF8A14ECA60
+:10F9B000053F27542DBE11CA8E33ECDEE192175B52
+:10F9C000EEB9DC6D80DBA2F0EF999C79F2276FE352
+:10F9D000FB8F9EFA8907977B57CAA244CEB78E2D1C
+:10F9E000C0794E5D61277F0CFE38247E40C3A5FEA2
+:10F9F00018031EAEDFFBE496052877F63A344CC7B1
+:10FA00005BBCC5F83E262D6C5F8CE397CF00A760EA
+:10FA1000F64CA0A3A33FFD57BA1F1E87FC13E97144
+:10FA2000550CDD0B33C3795C49F77746086F1784B3
+:10FA3000E250741F44D2D5F10D4DA7541867ED2A3A
+:10FA4000BB9BBEA760B2BF8EBA67EA6961F161FB7A
+:10FA50002A7E4F9385DB89D9A1FDCB718FFA163AA7
+:10FA6000DCCE9EE3F5C0BB28E3F529D5BF46BE98A2
+:10FA700056EA6163281EBD90F65DBF67D5D137A0F9
+:10FA8000CD3D715EEB987EB8FE21A314BC2F63754B
+:10FA9000D3BDC1E6664B2CF2FDD6766BEC50847775
+:10FAA000B385E47C6B7B4ADC50944B4E0BC54F51C5
+:10FAB000AEA861FEFDD16338BC42F2C39318AEFF1D
+:10FAC000C4097C3C952BF49FC95CFF519EDE477AAC
+:10FAD00047F31A1EA792FA864BE08FAB99C721A372
+:10FAE000E93FC87870DD09C58B5CC8D7D624F2EF32
+:10FAF0006F2C9AACF9F03EE7554E467263305EAA21
+:10FB0000403DCBC9FCD3601ED5C5F51B6F2B237DB3
+:10FB100026D9E9D410D4A96D7E1FAD5BE774E680C9
+:10FB20007F08CFB85C9DE1F856935E6137E90DAA76
+:10FB3000A9AE8D11792B428F6042FF96F1E0848D42
+:10FB4000BDE70149BF6EABF04F80FEE4A37B2325E8
+:10FB5000CC8F78CB74DD9DD23F6407A489EF1EA5BE
+:10FB600095B0ED4D61F127457F95FC06D22F29FD1B
+:10FB70000FD2CF31A204ECB5C4307FC44B605AAA77
+:10FB8000140F9B8E789205EC80ECC93CA6F0EB1923
+:10FB9000DF524FAFBFB8B8CF432FF3FB41CD9638FC
+:10FBA0006D4756CF76378DE3F8167700F6867AEDF7
+:10FBB000F50EBA873345DD4DF7EE371759785E33CA
+:10FBC0003BE4427D60E118CE77B34A3D0BC6503C22
+:10FBD000D593857803F0F0D9F0FE9EF0DB66DC91DA
+:10FBE0001D87FAF007034E6F42BDDCB7C642FC46E4
+:10FBF000C231ABD1722FA261587C2E602D08C5D9BD
+:10FC0000D67BCEF9F0BEF0B5E3B8DF356EE6C9FDC0
+:10FC1000E8075D37D4427EF6BB12748ADB01FD38FB
+:10FC2000541EAF7B0DE36D2DEEE464FCEECE534924
+:10FC3000FCBDFC7ED50309FDB787E797948EE3FAF8
+:10FC4000C8034A647DA5EF3885E759ED0540F621E4
+:10FC5000BF16B7C77D5F54E9CEB03AD21EF4FF1786
+:10FC60001FB7A75BF67E51E51B4A7692789F534DEE
+:10FC7000F63AFA18E1FD89BD2F55F9A0FE4856E481
+:10FC8000797F2BE67DE475EF60D467837B017FFA93
+:10FC9000443ADF00B394D0B89918970AAE8C991DF6
+:10FCA000E93B3683C6F37D6E8677317D427AECE69A
+:10FCB0002AB39EEA277E75BEF6F8414AD306FE5166
+:10FCC0000CF490C422F3CB0BEBAB5A1AEA9D4D2BEC
+:10FCD00095B5C83F9A405FC5B860AACB4EFA6A7323
+:10FCE000D28F27E1B99CAF652EBCEFBA03D43EE4B6
+:10FCF0005FE857C57BACD3EA399FF1BAB89F15ECE2
+:10FD000038CF55888F03AC848F527FB55671FE7300
+:10FD1000450CCF47EE4C7292DF34A99EE71FC7FB1C
+:10FD2000409FC5FD4DE6F9C33AFC433E24F55B67B1
+:10FD30009ED590476C37E5195B4D79C5FBC718ED2B
+:10FD40009984E2A25EF5AA97C0FEC575EE03FE8314
+:10FD50006500EC602C5F06BB1DCB57C06EC7B8C1F9
+:10FD6000AB0DB954BED6A0D1F3371A4AA89C981946
+:10FD7000A4B822F991C97FC3020AF9F1247E7D3A21
+:10FD8000A814EA4F4DE2EFFFF3853B1FF50D82F714
+:10FD900029A2BDEFEA6AC4D7EE3AABAFC6F6356921
+:10FDA000BC5E3DF6C7D5E8FFE99AA27F88F2AD9F19
+:10FDB000C5337F0DB6FD498C16C9BEAF1D2BE47946
+:10FDC00014FB9DE127128CFE9CB3637AF1E73CA003
+:10FDD000F075F4DDF7D2C348177D665A3D88C799A0
+:10FDE000D9463FFFD563395D3C3896F39FCC3780C9
+:10FDF0003E7A81BBA48F68EF9BF6020A44A02B5980
+:10FE00006E4E6013E87E76B57D76A43CA7F3827FC4
+:10FE1000441DDFC9DC312343F4D6E434D35B90E2E4
+:10FE2000BBE7EB6FDB8FF2F2BBD31B23FB3058AD8C
+:10FE300093BC0E02BD213F576B39BDA9567E3FB31F
+:10FE4000E64DEE1FD981F485F970486FF0EB341F51
+:10FE5000AFA79AE8ADC94C6F4E23BD0591DE60BCDB
+:10FE6000241FD72FE2ABDABF577A1B39F6BBD1DBA1
+:10FE7000BF8F0F525E436756DD0084CF66F13DBCF5
+:10FE80004BA5C337C7DAB93C18AE935FA0597CFFC6
+:10FE90001058CC06FCCECAB4418DD66480DF8C9459
+:10FEA0007CFA0EC16D63FB0B3A39E4447F4DE224CA
+:10FEB0007DDA58A4AFEBCED0FDC67E164EBFB5633B
+:10FEC000BBAA90FE32D674CC9C8674B75225396991
+:10FED000DED78B1338DD35297C5E38B901E171BD81
+:10FEE000B963393EBA5736290ED4C7E7332D278B6D
+:10FEF000BE2B43DFBBF997E6FF74E1B82F4EE0DF7E
+:10FF0000737137BE97E4E5FEB534B4DFE84A734158
+:10FF10004F7A849F765B7F033D2FC47D44A3E70B1C
+:10FF2000F18FE01845C085511EB057DCDF94719108
+:10FF3000A8F46CF2E346F51F0E8FFC5DCAC9E3F925
+:10FF4000BC4DC2FF6BD6F7E4FE0F4FF2FE6C2C8C5B
+:10FF5000A3385FE57EE07DCC8DEB9471B3EE3C235E
+:10FF6000A91FFA98BF09F56D2BA832FDB9BA81E334
+:10FF700075E71F093D7159A9771D8EBB9DB9F7A380
+:10FF80007C736A3C5FE1F949FA7A82E7B7D4034BA4
+:10FF90004AF57B71DC6878B56C9AFE406FEFD957F3
+:10FFA00030CAA8505C6BD24C2BE70BF58AE003CE2D
+:10FFB000B576A86F4E027EE646BD9DEFDB057CC39D
+:10FFC0004D7686D18E988ACE48E41BC84708B8FA89
+:10FFD0000CCCAB4C14E387E475F020EAA54180ED2E
+:10FFE000BDF02AD1C7E575D39B9CAFD881AF505CDB
+:10FFF000BA84DB09F25E507C9E46F697AAF76E3F04
+:020000023000CC
+:10000000584DF6FD9EB1C27E28604508B74C8BFB6B
+:10001000BE31F0BCF0C12987C7C0E3E26D8BFBA203
+:10002000381DBD7D4D397EEF6BD913A7B6A39F74E4
+:10003000CC7FC430F15D35CA33F83BCA193A97F327
+:10004000FB58B5CF8AFC2A321EAF19CFE59F8CB37F
+:10005000F682C7EF131E8B38E725E0B1F302787CF8
+:100060001CF135021E9FF88E78FC09F6BF170F01B0
+:10007000D61D3B4DFFB437BC9D3A55FFBC377E1AA9
+:10008000163FE0F943AC96EC6719BFEC015794AF0B
+:1000900039BDF8A5D6ED88457BB6A976C7EBF8DD66
+:1000A000C7A67A6E677726688E12B46FDE55E97B35
+:1000B00056D1FAA3DDED0366B96A3CCF8F3EB0326C
+:1000C000263011C6497772799BEED419E68B5B5DB9
+:1000D000419B3701F5350F43BDCD9E6261BE307F38
+:1000E000CC48DB2192CB9D20C7913E803E39BD2577
+:1000F000F171A47C9EB8F23E8CE4B0F15DC0FBC20D
+:10010000E8E4F5BD25E4874B287E6E05F653ABED9C
+:100110006EC4EF897F05B91936CF24D044C2EB579E
+:10012000390618C699E2CA32BC9F96F603C3FBABE8
+:10013000015FEC14C7E6F702A55E33DD9D6F68979B
+:1001400024E21C3FCC1D6318CFAA7E75EF68A47F04
+:10015000A1478C837FF45D5E93BE60D627CCFAC343
+:10016000E82B8DF75D4658451E9A95E7476C660E5D
+:10017000FA2E05F041FAEE414D284F80E864843DA7
+:10018000B8E36EF4ABCC71683E78D6BCF7EAB4F94C
+:100190004521FFD9E67AEEF76BDAE3D88EF4B05555
+:1001A000D0A5A4AFBC84E37318C9753B43796CA692
+:1001B0005799EF24FD05D29FA0D4723FC3D90959A6
+:1001C0003CEF48F09FCD55DCFE7D4809C42A4338FA
+:1001D0005DBA9343DFA74B638A6F3AA76F3D59948B
+:1001E000AAC8479579AF380EDAD9697C3EF61ACF9E
+:1001F0009B6CFC67ECEF62BE41C29F91911CF25375
+:10020000607EC2CDBC9F6FBAE83758E45BF6E1EB85
+:100210000F4C11F38D8052ADD3857FDA4B650CC640
+:10022000C3A1CC56B438F47F0C513D14684914F185
+:10023000F574114F8F57029C797C4B3E3212D828AF
+:10024000E625B064FE7D91D25F38994AF461DF8182
+:10025000F2E8AE63DA3BC5F0BC39E1C76F4D84E725
+:100260002DEFAA1AFA49EFCAF07D80746D0564F08B
+:10027000915FCB331FCF4DAD70B8A6413FD5B7BD11
+:1002800011E3BB23EDFEFD749EAB6388DE83D00FCC
+:10029000F1616B02D029E22B7ABA4685F281641CA7
+:1002A00023384673A01C0D623BEE6F36F83F23E403
+:1002B0009B90BFD42AEACDCE1DA4BFAF4DB1E317AA
+:1002C0005331BF27B31EF1B25F1CBF7FCB78DC6018
+:1002D00030FE12966F6F7745F66B82BE4670083619
+:1002E0002E4DEB4DEF8A1A47715A02F6C48B8FA33D
+:1002F000ACB9F13A7F206C9D72DF6B9D3B9405ECAD
+:1003000052E667C6384A2DD363474488A304FD0AE2
+:10031000AE73702D8FB30C16FEFA6F1B47A99CC0ED
+:10032000F5C74B8DA3C8FD5E237E9F01882DEE1976
+:10033000533C81CECB125A5F18FC1E277E44B82155
+:100340005004EA3F12F5B77677FCE949F8F5CD5D40
+:100350002FEFC652EA7133C5FB6B877DB90F73B7B8
+:1003600066AE5B21E258C6F8C33560D585FBF9F16E
+:100370007B01E1F599A6F5945A8D7182C94E63FB14
+:10038000A929C6F76583627A9C1BFAE569BF4ACF43
+:10039000FDDE157F0FE3DF9B0A3B07F5C27507E61D
+:1003A000CD61DCC7DD134FC2E3009EDF58597211E7
+:1003B000E28B85F4D2ADBEA5F75702FDAC0539CA74
+:1003C00079B1DB407FA1B847998EF824FDFDD1E8D3
+:1003D000E9B8339BFCFF83EBF7B74FEECBBAE300F2
+:1003E000F7C4791DE3F07B41CE730AEA2183EB5F0A
+:1003F000A1F7D7CD29EE158F72EA0FB44F0EFB8E01
+:10040000608ED56341FB39A7FE557A1E559FEFC913
+:1004100047286F2D47E085CC0BDC8A798100F79C5B
+:100420005AF17DE0B6DEF3DFA43C6C0ECBEFA364A3
+:1004300006B7C2C2C79772AF873F9D71BFAF9CAF6F
+:100440003B2FD0346FB7FC7371F9F7FC24AF36AE95
+:1004500038EC5E86B8C701FB8E98073A5AF8B37B32
+:10046000C963E37667C56B1FE0F8976C7746197729
+:10047000626630E23DA9A9C26FD5191BCC40BF41CD
+:100480006794BF9BF0D094A93F1CD78BBE8B79B3E8
+:1004900008CB68EBFCB679B37522DE24E3AD327F7E
+:1004A00056E6C55E287FF6BBFAE1570A7F40E93879
+:1004B00016310E615EEF6DC23F9E55EA598178118B
+:1004C0002DFE20DB7F30C01ED12F7E6442E4EF0E74
+:1004D000C8FC50586F4AB81D24FBC9BC7CF3786037
+:1004E00017AD1917E60FF436E690BF2FCCDE92F960
+:1004F000B0441F9B851FA29B0ECC7AA1888798F5DC
+:1005000042191F51AAB87F02E8A30DE745BD0BF3BE
+:10051000D2A59D27F34965DE28E685523CEA5BEAD1
+:1005200055DFBB3DD53885F2BA9A5CA5AF7D177B08
+:10053000EADF2718ED29AF93FB1DBC684F0DEF696B
+:100540004F15957A5F447899EDAAA33FFB84F26337
+:10055000C10EDD37EEFBE01326FFD4DC311CBFA556
+:100560009C96FEB4FD432D06BFEB5475D57ECA178D
+:10057000AFE5FE9674BD9DEC34BBD3EE467F8B7524
+:1005800032A7235B1EF3EB3CCE4BFE15995796EC3E
+:100590005C12F1BEA9B41383D24EF4F1FBA99D6F96
+:1005A000F2B86D3CFA5BB06119976BD2DF624B1108
+:1005B000FE16533E76BCC9BF62F6B79C1E27FCB63A
+:1005C000C2DFF288E2BE1B49FD575BA6FC0E41F17B
+:1005D0006F0F2F8E4753FF79FF9A1F0A7FCB834EF1
+:1005E00058DFDE0F8CFE1673FC2B42DC8B9C57838E
+:1005F000C6FF8EE26E12BE926EA53F2BBD9E7FBFE0
+:1006000069AABA5B41FEB2D9C9E1ABA23F2B25E48E
+:10061000CF529EFE53B75F8AEEE3F68893D7BD8E26
+:10062000EBB402C3591FC9BF25E06A8E4725D68B9C
+:100630007BC0DF933F2B79BC11BE050F16DE87DF31
+:10064000352EDA567E18CB51DB6FEB3B17CA92275B
+:10065000EE2BC7F22FAF07B350EF34FBB114047E7B
+:10066000714FF89AE128F1D45B2BF1D46927BAAD28
+:10067000E27034C32955E7789A03780A2A4237FE94
+:10068000752671FA4C9FACBD86FEB5C17956160928
+:100690008FADF5FC7B59128E5B051C936B97909F79
+:1006A000D08CA783DB2E0D3FC79AE0F7EC96C2BB38
+:1006B000116ECF3D5CFE3B2C7FEDBF2D1EE1B6E7FA
+:1006C000F1FB7E28E03780BEA76B82DF03F811E9DB
+:1006D0007E3DE13751E3F6F5E7A5DEB2F100DFAB91
+:1006E0008143A03F64474B81C3180732F2D3D4EF54
+:1006F000C93F15ECE6A7ECED9C4BE0A71F9BFC5314
+:10070000A93E4E37A9BE63449FE9409FB1E8AFAA16
+:10071000E57A24887D7FBC823637E7AF52AE21CBA5
+:10072000B180F0D9EAE271E7087ECA007DEFD7C454
+:1007300087D181138E772057EB107E52DE6DADE5A9
+:1007400071B4DBA678568CEF178AAB3D3F49BF6D7D
+:100750003CDD5FF8D6FEC77FC6FED2FF08784AFBB5
+:100760005701DFF1FBE657813C41FBDF5A1BB4A187
+:100770005CA9A9BF55F142D9E74A4E3FA9695E86F7
+:1007800071FE9EFEBA6002EAED138776E3C37A9C9F
+:1007900047E2C3C895E7EF433F57347C488F92AF99
+:1007A00074617C2835C8D7CDDDF850B7EEB2948B94
+:1007B000C787B809FCFB11DDF820E83FB536F82003
+:1007C000D2AF55E083D5057C0CE0A1221EE485E282
+:1007D0009E921E8222FFC00C9FA06F48943C8415FD
+:1007E0004A492FEBBBE8FC03110F6D12F1506F3D2E
+:1007F000CF97ED5C1933D5987FA0D1BAA739EB9488
+:10080000F03CFE0879B22FE3F9C938A78C6B7E5E05
+:10081000EA79059F4FCCE5E71C8C1E670AE0FD5680
+:10082000403F9709CFDF223C97F70F841E77DB14F8
+:10083000FD6D1C7784DD4F79CEA0EF1DC6765BF78A
+:100840003EC9BFB72BFC90322FEF3BFBCD12ED7EA4
+:10085000BC2F29FD669B13EC3BF0BCE7B3E014FA18
+:10086000CE2FC629D0EFB43186F21A172A6078232A
+:100870005FBCCAFBD1788AEB79281FD75BE170A1F6
+:100880009EDF9C34350DF946CD5A95E47A34FB460B
+:10089000D25B0DF01BA2B77ACE6F5201BF08DF7C8E
+:1008A0000AF19B74E0379CFFE80CF53A2BD29DB31C
+:1008B00027BFD9DC0BFC2F92EF7C83708FC077941D
+:1008C00009C506BE6399F01DF8CE4FC6336E1F8A68
+:1008D000FD633C80F68FF415BE7FB33EDBBD6F2316
+:1008E0007D49BAFB5F4067232744A6B3FC09DF8D2F
+:1008F000CEC662FF087476E504239DE913FE67D235
+:100900005905E1DB05E8ECA3F14CD8B7D71AF48A16
+:10091000CBD5F6733938FFFFE7FCED8357723BFE0A
+:1009200042F9DBF87331FE53733EF73FFCA9FF6BCE
+:10093000FDA9CF4EF81EFCA9AE716EC23FB35FF5A4
+:1009400093D1FABE09BDC495259FB64A3E0DFC1849
+:10095000796F0DF033E4CFA9555D9F3ECFED4D2D5E
+:10096000DE4DFE86D771BC74C1AFCD7C19F4CE3795
+:1009700026FC1DFD0D7F2FBFE14AE167BDD07DFB49
+:100980009502CED1EEDD3709FBBE09C6C07B7A5B8E
+:1009900057DAFDCDB0608FD0AB47D45E773512D932
+:1009A0003BCBEC71C15EEC26F977245A1BBC2F9E21
+:1009B000CC09DF1F8B28B7BAF767D293C3ED26F7B0
+:1009C00025D84D33261AF5646B2DB773AD20EF286B
+:1009D000AEAF9704905FA7FB94764C0DF6A6D42992
+:1009E0002807536B3D940F7FA9717D331E458BF310
+:1009F0007FDF717D73DEC0FF94387FD14461CF9B70
+:100A0000E2FCD2FF6A8ECB8FB0B796917CADB6E098
+:100A10005FC060CD7B3FDE71379EF71C07DDD330B2
+:100A2000E703448BDB8F48B607E3B3A3C7EFA5BF4B
+:100A3000E0115BDDEB68873FD268A1F335E70DE499
+:100A400025F0FCF1B313766DA3FC1FA90F57093EE7
+:100A500053AFD8E9BB8E557EE2335E7D5723C693F4
+:100A6000539DAC1DF5ACB8896EC23F354D273E6332
+:100A7000ADF2125EC9F8444D26BF37172BF04B1D5F
+:100A80005AF7168E9F7448D530BEBD119B02CF48D1
+:100A90004059897AC4180BE545B42975E4F76855BF
+:100AA000DCF4F73F92F25CA41F3D95A4FD7E36AEC8
+:100AB000BF1FFF3B2507A62F49433EB8B6B1310DF6
+:100AC000EF27DE3491F3877BA79FAEA6387A2EE816
+:100AD0007F0A9586BF672BCB1DBA22FEDE929FF25E
+:100AE0001161DD5BA8DF503BF9D954FD81DB900F2C
+:100AF000A8974D25BC6E555C7316E079E5D8498FF3
+:100B000069CE19357B11EC6B5D3F4F59169E6BD248
+:100B100050DA677352FF44D447D70DC8A6F95B1467
+:100B20006F5916F61B6021BA56457C7E5DCE92D772
+:100B3000F0EF8034A55B18DE3B68CB39DD82EDDA5F
+:100B4000C6F03F82635EAFEA32DE93C20F1F21FF21
+:100B500056D3785C5C157171D514572ED51599FF55
+:100B600048718758C1B76A7256CFA6EF2738ED2E65
+:100B700044B2A6846025E1C74A1BC3381DB3B61A28
+:100B8000F4B4BB1B8CDF7F71E619D7D3D27D3F2134
+:100B9000CB8B7C86FE062CDD5F48F2227E20BFE5F3
+:100BA000497FF1BC1E2BEA019BD717E17CFE51FE69
+:100BB000A3FC47192AFF2F0D22483C0080000000AB
+:100BC0001F8B080000000000000BC55B0D701CF5BA
+:100BD000757F7BBBB777279D4E7BD2C93E816C5614
+:100BE000B6446410F25AB68494D8684FDF322EBDF2
+:100BF000387C88C476CED8B8CE34932A4E49EC845B
+:100C00005667EB64C95FB2A414E44C3AD3B34932DB
+:100C10006DF08042661AF33967700821D028811080
+:100C200032930461885B529A310127A2434BDF7BE8
+:100C3000FF5DDDEDEAE4AFB81331CCDFFFDDFFFE91
+:100C40003FDEE7EFBDF73F00F0C00200D90F003AEA
+:100C5000C0A6224F122200E7AA200D95D8F74E9782
+:100C60006941800FE9AF25DB1EE807C8F8B2FD60D7
+:100C7000AD0A660DF0DF87A271CD3B6E5AF3C29FBD
+:100C800073DEE16AB5371D9C3BAF3DAED594001ACB
+:100C9000F2AE03D225AD73E6673A8E4FFE4C866AFC
+:100CA0007DEE7AEEEFEDEF3615AD2F86DAFFBFF170
+:100CB000F3D175A9E90128137D68C47353BB44744B
+:100CC00075A48302820E039D8DE90CFE73424A0CCB
+:100CD00057D2F9C21EE39B30970E762B6B73F897B1
+:100CE0009D5F16D347ECF9710BF2CE801908D12B1A
+:100CF000FC0E69AFE1B63F449628110F3F076BBE6B
+:100D000028C0B31FE2FE8E67F905DA82ECBCF2065A
+:100D100095C72F57FB5E6C5885CF5E918D6FEAD9D2
+:100D200079793F95C00B80FD5D65F6BD62ADFB91A5
+:100D3000232A64ECF1F8FF0933CC749AD8783F2465
+:100D400090BE3FDFF089E2441E39B0DB6569E7F70A
+:100D50006FE09CC07483F437F1DFA95F8C4ABCF864
+:100D600009F13CB5424BEFC7E7FBA5F4FEEB68DCAD
+:100D7000DD82BE361F0A2D3EE05FB40AE9E8B5F811
+:100D8000E4759F0BFF94054C278B38397C58C27350
+:100D900054D1B907ECF974230348A703CBEB56EC05
+:100DA000D7E9FCA3FFF26DDCC791E37BDEFA36BE28
+:100DB0000ED4D68D34E17E0A0C8F21933C7FEAC499
+:100DC0000964170CD5DE334AD36E1D954C0DDFFB3D
+:100DD000B5E03199CEE8974C9A4F39BC90CF13DDEE
+:100DE000EA948309C958504EE71B9380F85268383B
+:100DF000DFFBF49CF3E0FF4788CF2C9F39CF916E47
+:100E000048BDDEC9DAB9747FC5926705C727ED7999
+:100E1000912EE35EFD16A2F3F83E199238E5F82E06
+:100E2000548AAB007E6B4E7E7A3732FD9E412FF3A3
+:100E30006122A6A6251C3F51A4DDDE4BFD328F7139
+:100E40008C898AFFE3B946975DCBE7B2D7FB6C8B01
+:100E5000CEEB8DC51694933EE2B8F2F80D73E5CF54
+:100E6000BDFF4B95BFED668925EFA340F3C3E42D8D
+:100E70001ED227BF35E63A79B27E09ADF7731984E1
+:100E8000DCF441BC682E7D06C91E7C242B27AA25D4
+:100E9000477B23EB7F4CD3CF27CF6A7ACAACACA376
+:100EA00075A08FE8BE2CEADC9F3DEE7316BF7C690F
+:100EB000C87843D4664CA8A376CA94B03DB7E10B7A
+:100EC000DA5A7DFE757C90336F25CD077C6E2F241A
+:100ED0009858C4573387AF7B0AEBEE24BE0CDEACC8
+:100EE00002CB9F9BCE17E8AB4AE6A4142279F80800
+:100EF000CB4712E5A31AE7F1469D72187F72154C95
+:100F000007059F92FCBCDB243E255ABCB376C89FE4
+:100F1000632F41DFFD1B19E7FB6AB7AAEFC77D7E90
+:100F200035BEEDBEDB48CF5F900D89DFEB6C0FEF78
+:100F3000B1D680D109968762CBEFEC3C71EF6BCFD5
+:100F4000138FBAD5D7896EA4C7B37411F6D9F43705
+:100F500066D73BDC747A7829D221359C7FFEBB4A68
+:100F6000F5CF11FD6C3ACF37EFACFDDE7972B27D73
+:100F700065B63F529008C4F09C2341038D00BD3FED
+:100F8000C5EF6115CA65F9FCFC448AB23CBC46FF5A
+:100F9000C4713DEDA616C3BE7C02B7BE1CED6291C6
+:100FA0007ECB7A7CD511797D23D17F6BD0A3C939D3
+:100FB000FA3570D00B99201102D745B95B07D31BC6
+:100FC000D7E338A8F2B29CCB9115FC7C4B515CF175
+:100FD000607B6D6C09AF677FDF03FFA0ECC0E7CBE0
+:100FE000BDDA2B2427A988443BC2E74840DCFA5AE3
+:100FF00005CC10B65D7ACC4F7EADFB095A08A02512
+:101000003C1E21BF54F7D8918A04E975D29CAA41AD
+:10101000FE842D765DEF9B8AB7E17C032FCAC61E46
+:10102000EC8783DBD601CA91F47090EDC400DA79C5
+:101030001FF25D0976BE45CFD79C0568CF91A79674
+:10104000193FB4E7D8BD18CE9CDB6FF3973BC6774A
+:1010500068958EF732984606E9D4155DE61857D4A0
+:10106000B04AA3FDF6E82B1CCF6FAE69767C0FED7E
+:10107000CAE969ECAFC6FF88EF32883EBFAF249C57
+:1010800080FD9CEF15C8E9E3FBB5B1A2C819724A0F
+:1010900037C28DA447C8976307C8FEF4FAD96F0D0D
+:1010A00078E184540CA4FA49A827629BECEF254B05
+:1010B0005E93B14AE693147CF67D96C327A63D84E1
+:1010C000B3E031A827FBFA8F9A7ED28343AEA629DC
+:1010D000F1FB280ABA8E7C4218960CD4F37373691C
+:1010E00009F93929D983FD45382E2A44119EA37167
+:1010F0007ED8FD15310E16D1380D9215D8D70C2893
+:1011000020BE56E03C9F2DE1EF923DD677D788EF89
+:1011100092C52562FEBA7AF6A3990E6C8F82013EC3
+:10112000B63F71044D6445FAB8BD867685CF1F0081
+:10113000A39EFAD530CD760AD92F517F214C6AC2B1
+:10114000C86784DD9E56C267FCC2EEE7D397ACDE6B
+:101150002870C6E6070EBEBDC5FC12E9CDED773698
+:101160009C1777283B9F71E8ED23315DF8C39D5DA7
+:10117000AC27CACE67F9FD4BB1F81E9A8F48EFAF86
+:101180009F4BEF3A350364BF523130923845EAD174
+:10119000B5D1CDC8DFE4A37EA31AAE1C3F2E950FB8
+:1011A00069D00A88AE72DFE5F201D8CF074FF88F19
+:1011B000EE676134D94FFE097CF9F6E5F0C5CD0F35
+:1011C000B8B714A0F9C276F4EB5226202D657A98B0
+:1011D000D1FA2CFDB19F5C66D1ABC4E2872CDA8CCE
+:1011E0006C3D574AE6E70BCD575A92E5CF85F8128A
+:1011F0008DE3FBFA2C7FE43E938967FB691F9C65B6
+:101200007CBB4432985F4BE5B887FA8552C6023DF5
+:1012100069F69B21D0983F57411FB711EFF466C67E
+:10122000C33B7121C2B31FA097CD89C752C1567F5E
+:1012300025D9D71AC5F060BFB6C8134F231DAF56C6
+:101240002043E72B572049F61C9101CF9F7A14BD0C
+:1012500015FA9914BA690F7DB7CB9F4E49D9F5EBB2
+:101260002CBBFDE3A26F69D3B5593A9F26FBB55C51
+:10127000D0C3C3F6673243DF47BBC118D0E7DA33C8
+:101280001C97942D3B45ED267AD1CC744B86B02F1C
+:101290000DFFE07DC219349F82FDEFC512EF923F32
+:1012A000259C1E2C61BB345D48C07A2E2E30095718
+:1012B0006CB6D6E9BD495F1CC77D6E1EF6BD4EF308
+:1012C00041CAE7C405EEEF750972BFB7BF9B952B06
+:1012D000F7F797A907B0B3ECA27040ECE1D5C5D3FE
+:1012E0007970FB2CCE243D29CDFD4EF0498D24187C
+:1012F00077A8A42FA5179EC7EBC22FF63C5E145CFF
+:101300009AC76BE117DB4F6D83B35E65A9B54FA438
+:10131000D716B0FF224CCF4D16FD3E4DFE2A44F4A9
+:10132000C44005CFBD15E22AC9ED5F2184261CBF4C
+:1013300064DFD610E30568D7883E52E663F287D7AC
+:101340005F021D2D3A6DCABCE5D5C92EED2C823742
+:1013500072E337EBFDBB1B3E21E274BFBFCA9F1394
+:101360001F169EF8A09F8CFA9EC2BF7FB105B73EA4
+:10137000F8926CC895F45EE0E60008FF5D487A8A52
+:10138000FB2E7CE2CCFFD0F84217AEA69921675E17
+:101390004FE141C6B3852155679CED92331B47C38E
+:1013A000070207072DEAE5CC2B115EB6E31E9E5718
+:1013B0009ABBEE0D163EC757B10F2F02CFBB713A45
+:1013C000CCE273F13E1854859E609C9971C4C17A39
+:1013D0005E3DB3F76D7F57A6C62B8DDA3CDF5B7C95
+:1013E000A8A5401CEDC2C20A48EFC6FD0E0FEF884B
+:1013F00015627FAC0C748C3061A8F38B12E18DD632
+:101400008810A57093C085B404D8713CFE85FF4355
+:10141000DF5F83EFB755040DDC192C7C1B7132CED6
+:10142000737785DF30F1410AC4FB649347C4934965
+:101430007899F0E8568B3FDE2704CE64DEA01E1EAE
+:101440006C15F86AEB89CFAE23FE8E94DC6A64706B
+:10145000DC56B44FA584C746BD8CE710D73970BFA2
+:10146000AF290707E2FF771FF13AFA5E174E3CD02B
+:101470008A3810E5DBC681F7B702EB19ED8BFCC9A2
+:10148000955A078211B6A73728539E7CF9379B1FC0
+:1014900036FE7EB24CD0D9FB9EA00B06CC3BE8B901
+:1014A000EF3D118FA1010F362C20EF2FE8E76B40A5
+:1014B000FAD0D3F7843FC02F79DF26FE47FB76E3CF
+:1014C000619F0B0FBBF76BF3E1619B3E8DD048F43E
+:1014D000417CCE38C13E8FFB1C4F607CDE8E42F1DA
+:1014E00054BF9FDB4CBFC6EDD3FD516E4FF5EBD023
+:1014F0008E00ECD9FE1A6E9FEB37F8F9F3FD4DDC48
+:10150000DA74984B1F91D7BCC6DAB3523B15273F0C
+:101510007A55BB875561EC5E0FD3ED1CCA27295F56
+:10152000C8A0DC1B8EEFF6A429A4B7E39F8596BC68
+:101530005EEF3B7BD287E347CAC1D883DF2F6CDAEB
+:10154000C672B6E6AC27AB2740714E81234F10839D
+:101550005247BFCD7FB5637C87B6D4F1BE2436CD6C
+:1015600076AA2B7ABD639CCDE77FA2380BF737D6DE
+:101570007E5A23BAF6E82B1DE3947B91FF7514FF86
+:101580007CCC312FC8EB0CB2D3251B9C721872F1A6
+:1015900055DD7EFE38C8E6F3DBADCE78683EFEBA98
+:1015A000E5D5A66BC92C5D455C99A2B812E95AA293
+:1015B00009BADAE71DB1CE6BAFAB3489F35DE9F858
+:1015C0003244F16565BEF8F24D8BCE17882FBB9D76
+:1015D000F1A59BAE178A2F17B439EDCAC5D273D3C4
+:1015E0006291772B7941E6B845EEEE633F583A2594
+:1015F0001B5D64122D5C56443600C76D6A50D3845F
+:1016000033C7603A4AFEFCB0845445792BAD35CAE5
+:10161000C9CE3C14365EE925DCD823F280CFC46EF7
+:101620008F12EE18DC7D348ACE0A9ADB3C6CEF46D2
+:101630006367387FA1E8C0F90B6CCD741E7C628FA4
+:10164000B7F38D8737AA6909C71FB6F28D877B6606
+:10165000F38D5CDF986810F9C68FB6E9569E29199C
+:10166000A578E5AB1B1BCBD95929D8BF81861BAC0C
+:1016700027FB035A88E2E8D4468F46E79257DDFFFE
+:1016800005928F4352DFBE2A8ADFCA3C9C774D8584
+:101690001BCB37E3387913C218EA6F6C7C956CF674
+:1016A0004499BEAF8ABE0F5731FD0657DFEEA775CE
+:1016B00046C20B7A283F32D2E1611EC98433423CD4
+:1016C0004FCDF9E21E771D40268B4BF15BC4935141
+:1016D000C95F11FEC8C9FBDBFCDF1F56393FBBA544
+:1016E000EDC1A3C92A7ECCF66BA15D97D9D8CA7982
+:1016F000E6738427A4F9EB327BAD7CE7ACDF893A53
+:10170000F793671DC605765D82FE743B4F8B7FA9FC
+:101710005B3AD3E447C721DE4DF633193C7F1D44C5
+:10172000099EBF0E325FDD63579BC8A37E99F82EDA
+:10173000EA338E7A89D26DD545ACF8F530E5C349E8
+:101740001E5C75127B1F03D67CA9593972D54D5684
+:10175000ABD67C06E4CB5FFFA9F593FBDB44BDE68B
+:1017600052EB26DF6D03B15F2BDFEDB5F87F9D3CBB
+:10177000B983E4F1CF9DEFFE6EDB95CD77CFAD134E
+:10178000A5595FE0C4D93758AF972DB0F0CBF9EB2E
+:1017900040FB09E823FFC657202EA5FA87D54FDE68
+:1017A00020E675D78502561EE5876D4B45BC45F68C
+:1017B0008498AB188B89AE41E53B490DCF51101C85
+:1017C0008330B6BEC8E624B52D8B75AE0F8D2FF3D2
+:1017D000B0BF1A2F4A1C1DA4FD2F0BE6D58B572D29
+:1017E000FB376CD56F48803DA46F92AD1C90F02004
+:1017F0009F2640F0F9EDB6308F57B4D1A6BB506E9E
+:10180000DE247928E3F3E4ADFF9C6913F59F9CF98E
+:10181000BF41729AB226A77936E33CFF65C923908F
+:10182000E35840C18E58CFAF8F36112EF85D9B26FE
+:10183000DE2B2B0CD287F170FEF57E679D072815F5
+:10184000D398C5470B378879C02FBE3F2C9DED3DFF
+:10185000BD8AF9CAFA44FBA0F7EEFA977BFE408DE9
+:1018600033BE512B9CE33F983D87332E3A344F7D56
+:101870006C51BB90D796C542CE483EF6E4910FB767
+:10188000BEAB94F7A478AA3D6CAD27EC4E50996A94
+:10189000A57827580B06D71495937CDEF893552727
+:1018A000A657919D0F191407297E3495F5D938D183
+:1018B0007DEE0BC5798A02496FFDDC780FE7358B29
+:1018C000EB859F49E6CC774DBB901339371EACA40E
+:1018D0007044BF85EB785407A4FE2E5F6F3E3F5DDA
+:1018E000DD76FEBACE9138C61114A43E7C70DF16A8
+:1018F000ECBFAB79341F8FD1F3D67534AB3F5BD7D8
+:10190000895F5C5D67B4BDA4A7EA52EA3AF3CC3BB9
+:10191000EB8FE7D675DADBF19C6341515F99ADEB54
+:10192000DC1AB9A87C0E587EB9C4B2CB453D561C12
+:10193000B153E238E2E9867F3FB09CE4ACC1CB72A0
+:1019400000072720574FD66DD0BF564A7EE6551F59
+:10195000540BBB66D27C765C6CD34FB5E66F7DF0E2
+:101960000585C68F977B1A793EC8F83C5CEC4EAA79
+:10197000562B53BB5CCDC8C5346F095875F48C44E5
+:10198000CF6348ACDCF86064E6A76DC59427098294
+:1019900041266824A6ED2EA67F501588F04EA59E00
+:1019A000267BDBE62F74D8FF911E55D8D76A715F6E
+:1019B00066FCA4FEB5AD387E68678071D3A10A8F3E
+:1019C000D0AFA4C4F5E40ECD19F78C4F2E1178ECEE
+:1019D000A0D7A07B22C727C5F82DB1C6B4CCB8DBF1
+:1019E0001917F5E8CEB8684B79FD2B841761D0CB79
+:1019F000F978CDC2B537D738E3A4A2CABEE708A7A5
+:101A00006C1A1478786FB464C116B47FBF6AD71D9E
+:101A100071E2E6C1BBB96E34A802D7534736AAAC0F
+:101A20001F23DED78F6C61DC58C0749CD8A8962722
+:101A300072F4A5B4C367DD8B10F803E1656232CFA1
+:101A4000FBD20E617750B0D98FDBF2F2179F117481
+:101A50000E55405A271CD7B3234371E578059E09DC
+:101A6000DF0F46AB7A4ED2FA2FCB40E774CB6165DD
+:101A70004735EBE9AC3F6DF238E8E4F5C5FB687E2D
+:101A8000B81974B26BEDDDD8A73CC00615283FE04D
+:101A90008BFE2D9FB704FB01ECFBBB47930AF6FDC1
+:101AA000558995848B9FD975C7702C42FE4EE8B737
+:101AB0006FC3B6F82768FC2A2F04687FA04B51DA61
+:101AC0005F52DC6770EBC3DED4F7DB894F7B0D8997
+:101AD00059B4A967FD76BEB7142960DC34EA8D6F6E
+:101AE000667B749B5F4BB20F9CE638C2FB151F9060
+:101AF000DC4DECFA4D19E1EF1FB58BBA664077C6A5
+:101B0000D77E1865BFBDDA9CDA40DFAD6E52A9E220
+:101B1000014F379F61BE4D34F80C1FEE63A259622E
+:101B20003AFFA1C19BA6759E52A7645AF7A93FE050
+:101B3000DA95F9F43BBF5ED97AE41E3FD2B4DE4FAA
+:101B400072B117A66E25FA2467449ECA3D2EDE2187
+:101B5000FCD5DED46D350AE7B354AEB72B670DB3B1
+:101B600018670FCFC4FF9972AFC97645C449E59E87
+:101B7000A484F30DF5887B194345896192E721948C
+:101B80007B8E9322E23ED27879C4D89FB3DE78F37D
+:101B9000ED3564CF5E6C0830BE1F38F5377711BE67
+:101BA0006F95DFFEEEC3145755A8CCCF216FDFAB86
+:101BB0001407251B02BCDF538B54F0933D88DCF5E2
+:101BC00000C5D9707C03E4CAEB44B7D0D3890AA11D
+:101BD000F7D2C31B380E189764A6B359764C223C33
+:101BE000E6EBB6F34E22CF14B3CCD9C48647380FF8
+:101BF00075558FC8A3C6BAAD7C931C4CB25CDE1879
+:101C00007880F4DF54BC8EF878CD5967BC7C952B76
+:101C10005E76E7A3FEB7DDCA475879275B2E43D629
+:101C2000988926CB4EAFF2A5851CF6956BB573F55A
+:101C3000FBDF2CFC3CD5EFE77B643FEDD7B81F32D0
+:101C4000DFD95D8AF3BCDC1FE5E77FB9FAA894FB16
+:101C5000DDC8AADBFC3ADB93E928CDEBB6236EB9ED
+:101C6000D8DF5EE0F027F63E8B9A5BC5FDBBB36C18
+:101C700091614D70BA8D7D234C0573F17EA65FDCBA
+:101C8000737BDADAE729DAA78FF264627FCFF5EBAC
+:101C9000DC3EDF5FC3EDC60E10F500DB3E5C83F675
+:101CA00001E9D05E21FA640F88FF2591BB384FE629
+:101CB0008B2A1AE9BBBF623423E5D88789A2BE5FAD
+:101CC000DC4D76BF2CC8F2E83ED79A0E4FDE736D1E
+:101CD0006ADEC176E71CAE43F4473BB39DED10DAF4
+:101CE000055E77837A27EFC344BBC476A1EF6B7799
+:101CF000B05DF002C9B9DB0E9424857E277491BFD4
+:101D0000B3EF09CDDA055C278DEB3C8D769DFA4368
+:101D10006807689DA1E6D7FF9AD6FDC3FB057C2F17
+:101D20006A62E32B6C175E3C8736FB0ADA055B0FB1
+:101D30005F3B153B961BCF67F9BCFE8E13821E1AC4
+:101D400008BAF6C6F3C48997CA67302F0EC7A495A0
+:101D5000E93B45DD51653ACC5B774C7A0C4A0B0C7C
+:101D60004C2ADD56DD11A8EE68D71F73EA8E05CE2A
+:101D7000BAA39A4E31BE495B75C7DBD78ABAA35A5C
+:101D8000301DCCEEC3AE370ED2A3F26C7DFEAE8E0C
+:101D9000C4AE8E866C9D5197441DFCA598F9657A5A
+:101DA0000E9112F6FFEE3AA55D8F4478272572EA70
+:101DB0009B75F8DC5F92AD7FB9EB99F6BD8C3A75F7
+:101DC000FAD801A4CBC09D7EC60FF6FE061EFDE824
+:101DD000AB8948F63E805DEFB4EB9976DD13F73DB5
+:101DE00096BB6F7802D8EEC063FEA3E4DFDCFBFD98
+:101DF0005E2C717F47599E7D5F647D711D58F32372
+:101E0000EE227D7ECDA2A33DEE414B1F97AB22BFBC
+:101E10000D2195E39DD607832013CE2E528F915E20
+:101E20006C86E90EA2EF4058E0BCD4212FDBC9E359
+:101E30001D3AF3AF4C35F93E44D99703C66E9C2644
+:101E400075520B51FEA9A7DD3CDEC1FB18BD753DE7
+:101E5000ED03713BD9BB5F57DF17E17A3FDD7B2A8A
+:101E6000A6F8CF584C7990173AF2DF576A597C762A
+:101E70003DAF5BE4018ACF5201E339BE57FCA4C2F7
+:101E8000F3F5E014663DDF5F6A574B681E713F75DE
+:101E900020789AF9D552ED5BC179BDA2FC71E0B30F
+:101EA0001D226E5D8B73A938CF675A13DFA77D5350
+:101EB000AE34CA722CE2BB17C84E0AFB75AFA7310D
+:101EC0009B072B96132FD078382E29E41F7D96DCA4
+:101ED000D871E23BADE68BC477E48749EBDBF78052
+:101EE000ECF55FB2F890EC307F4AE35EB7D6A9D349
+:101EF0009231D2C3BA04CA83C4FAE3AAC30BB9703D
+:101F0000CBAB2D6FB375784B0E254DD46B51AE5EB8
+:101F1000E7FD3EA59FF448546F4F1C3D40DF5E66D1
+:101F2000BDFBEA36F32DDA77716BFC3F69DE5FEFBC
+:101F3000BA83EF055FEC3D8E96C57D51AAE30F0590
+:101F4000046E7E286638ECDDA24EC19F459D022FAF
+:101F50005D8F3233C5F74B0DBEF70DB09D71B46D7B
+:101F60009F46FB138FBF599DFD3ED50F93540F9A8B
+:101F70006F1FDE7D3B38AF3B50D1EA27FB83F6ADC8
+:101F800098FA43156634771FA92221E7C945226FC5
+:101F900041F9B464CE7DF2924E99CFD35601199295
+:101FA0001D5F50D4DD7CA8B83AFA1F9FD9C4F78BC7
+:101FB000F1F924A518AEEAD4455C1E31C0A478B36B
+:101FC000220EA4DF3E2DFB3DD551DB2AFAF8BEE5FB
+:101FD0007CF3C851FBFB047F7F53A7C6F3AA118F84
+:101FE000230F7021BAB9E9324874AB9E9F6EEA455F
+:101FF000D34DE89D9B5E8D16BD9E097F91CF071F37
+:10200000B4B19EF9343C27B6AB3B857D9183262441
+:102010008AC846C51141529EBD0FA80E6DD359D630
+:10202000049D65AD8FBFF3551890B881E89260BAF2
+:10203000B8E9807602C84EFCF0D12311C2A72DD892
+:102040008F0AFB013E6CBFDE21F862EBE93AF849EA
+:1020500050E4BF9DFEC26D4FEDF6212BFFEC7E2EAE
+:10206000750584FDD0C141F722EBF70BC786EB194C
+:102070001FA0FF4CD2BD98CEF2EA02EA5FE93AA275
+:10208000BB7EE8AE13BAEB8359B931FDB4CF77B557
+:10209000D3C98FE79117BB3D60E9DB60BF3FAFDE7F
+:1020A0001D407D27FE0D359B49AA1BED0D4F47595D
+:1020B0006E4EBEC5B858794136085F2A8AE073E78C
+:1020C000A269E663579309546F3AD0DFFB9DDC7930
+:1020D000BFDE9AF84A27CA49A13669D23C41C824D2
+:1020E000C9FFAC2D35FBF2E1A621CB8EBCD31ADFA4
+:1020F0004DDFD1B575E2FF9B31730FF52FD66ECD55
+:10210000A74F8A4DBB4BD6A7D3429F9A76B03E8D40
+:1021100054F431CE1AF9894C482A8B232D7D1A6943
+:102120003EC3FA6EEB55DAB63F4D422F288F40FE84
+:102130003B5461B2DDF896A54F0AEA09E993CFD284
+:10214000A790961D4FF9F136A2333E572AA6F9BB48
+:102150005093A57FA44F41BA3F0C8C038650EF28C3
+:102160002FE2D6AF962AE1379F684D3CD449F862FA
+:10217000D17ACECB0F55FCBE94F18B25FF59BC5BB9
+:10218000CFFEFCDCB0C7207DA823005D9FD503FBFC
+:10219000DCAB6764C8206BD6CC48DCDE3453C86D3A
+:1021A000CB4C805B73A694DBD84C98DBD699ABB94B
+:1021B0006D9B29E7B67D06F56025EAC34C25B79DE2
+:1021C00033D773DB35B38CDBEE99953CAE67660590
+:1021D000B76B673EC6EDCD33CD629D1A71AE3CFA4A
+:1021E0004065B02BA00F46128A480F3EF32ADB77DA
+:1021F0004DE53B4AA97023D7897CCA34EBC3B1268D
+:1022000061EFBB82824F6E7D78A735F1AB7CFA30EF
+:102210008B6F15D088FE2A587F2EFC80F8E737F4A4
+:10222000BD8D7BD5A8C97286F8E40CF1F37271C23A
+:102230002CCE5CAC321EB571E6C822C49995599C6F
+:1022400039D42CE2B2D4211FC76F5B2471BFECEAF2
+:10225000B6C47FB37E82C813256EF56B849B53E1B1
+:10226000CE6890F27A7B65A07C01E2900F789F4A5D
+:102270005CDC67BD487D7E3326ECBE3DBE0E4E7BEA
+:10228000FA2E01C7FC9AFED93CBF5D28B95C3FEB32
+:102290006D13764113762155D137CC7569975DB0B2
+:1022A000FD2CD2C3611796765976C1D2F3920AE11A
+:1022B0002F4BC82E207D9675D976C1E967151B87EF
+:1022C00074DB38C4B20BDDE23BC4ED0E3F8BECF6A1
+:1022D000430E2E46395ADE950787B03FCFF1730380
+:1022E00055D531FA2D41F82CC4483C4333FA5A23D2
+:1022F0008FDF4969F5AC07279536C8CDAF5CB29E34
+:10230000856DBF63B2DF718FB3F56DE8648F38A759
+:10231000E5874EE2F9CD1C7DEBD2843F42FF73335B
+:102320009DD3AD6F2D8BCD443CCF3E3FD925F0FEE4
+:102330008FD658B81771A511647C9F17377C92F817
+:10234000D7207EA7F118DA9F8EEE644AD159CF3F8D
+:1023500049EBAE6E9F92290F7453D3E8CB541241D0
+:102360003DFD5457C3E5EB6953AB55EFDB592A2EBE
+:102370003B5BED85E4DFC645B61EB8C73D5469F644
+:10238000E6A3C7B3163D06863D3D74E1CF968B9319
+:10239000CA52C63F79ECAD695C117B7B71F8E324CE
+:1023A000FA41E2FB79F0C7817CFC9F0F7F8C77CDEF
+:1023B000E28F31E2534BADC01FCF76C179E39BCBA7
+:1023C000C615B1D34CB7CBC5150F769D1F577CA74B
+:1023D0004BD84D459B66FB11BA4C5CE1B613881F88
+:1023E000FE95E96308BF6BFFDE842F50E6F82FB43B
+:1023F000338FD338C20D7479EC58B03529B11EC46F
+:102400009FA4E7A3E61296A32BA50F88137FD09570
+:10241000D3BF905E5CF4B8C98D9C07B4EB997F0C78
+:1024200084EA283FB2D32FDA2F15848E513BD62F62
+:10243000F2D07F0C2C4E53DE6CCC0B5C3F18940A10
+:102440008C63223FBA9C7F5F037D37527BA6CBAE65
+:10245000CBFF9DA35E1AD6B63DFE6669BEFD88FB26
+:10246000BD948AFF90EF8157689C3FB7E84169208F
+:10247000F6CFD5058CFF00614B538EDD4F75AC1345
+:102480007172A59FEB79322867281F3F4C6BF1FED4
+:102490007AB98E19B0FC212849FDE3BC5F9107B5DC
+:1024A0007FF7B76FF5FA627109793B8FB7E57F5F08
+:1024B00070D4AFD53AF4DDF1BB6E772BAF38A5B54C
+:1024C000E17EC77485EBAE078D4880EB2615227B35
+:1024D000EE5FE489A7F3E8E9B5DDB3F722785F6141
+:1024E0006B5FBE0E11AFCDB7DEFE7EE73DAB82DA8D
+:1024F000B849FEC45FD91727BAF9174524CAABCE2D
+:10250000D2BB5BB2EE69189916A4F7B0A587053562
+:1025100093190FD139BC6D25D1D65F938633344FD3
+:10252000ED24BC41FEA2D2DF9B6FDFD759FB1EF624
+:1025300026E38493862B15AE5F0E57E6F72F25DD35
+:10254000C2FEFA17EDE0F1B048E1FAB37B9CD22D60
+:10255000E4689FDAC7758CA145F7F37DB721FA21AE
+:10256000CD47D1EEFD70E681DDF8FC50FFF6C7DF08
+:10257000F4929C26B8DD77ED7E8DEE711EAAF76889
+:1025800094870BFB337EFA7D6678B5C87396B4E307
+:10259000B8DC7855AE08909D0DADC27972E2D031AD
+:1025A000D002B4EEBE906D1FA7FDC23E0A792AB2DA
+:1025B000C68EAC1275A9917576FE5FF02FFB7E7CFE
+:1025C000BBB82FA7EAC079685197E2D49E4EF7674F
+:1025D000EBC374AE324DD4A30E59F23568E5D9DDA4
+:1025E0007439B4788AFDC9A13553BDE43F429ADFFE
+:1025F000E826B93EEEDCD7DEE66907DE1869386DFD
+:10260000EDDFBD3F21F7CAD36F093B69E1FE90F1D1
+:102610007BC659F63DAEAED5420F8BAD7BF4C5916E
+:10262000B849F3EDBEF6B749AA131D2EB7EF167CD5
+:10263000DE790F03A6191787565B7539F96DBEFF52
+:102640000BB78A7B12F63D6F35A23AF202A5AEFBBC
+:102650005921571FE40DE7BDCFB6F397479F3F952C
+:10266000C3CFCF773BEF835FE8FB3FF6A79F3F8564
+:102670007E6E6CD5F9F5CFE6D3E1FE266E6D39B4EA
+:10268000E5324C47AC9FFFFBB1703C6FBDE5114B91
+:102690004FDCF2EA96D3625F9CFDFEE81AE73CF756
+:1026A000597A7E9F358FBA18CA090F8D86855E8E3E
+:1026B00006A0F7913CE77AAC5BE5F159B977E28285
+:1026C000A2CBC5052B5AADB8A284F56D6C55EB7342
+:1026D0002437EF915EE4D82777DEDCC6054A8FC049
+:1026E000A5CF845589FCBA169C66BC3CEBD72D1C43
+:1026F000E0F6EB7E6FB297F4CF5FA9DA7689ED470B
+:102700006577E01BC920FB0329D70F1ECADCC9F37C
+:10271000865D797388387F87B2B71B984E61DDB2CA
+:102720002FDD8AB887356A42EE3D9A31CFDB336FB1
+:10273000E8E2DF1FD838A292DE1F9CE2DFC7C03D6F
+:1027400090BBFEDE964DFC7B880BF1DDDE17DDCB0A
+:10275000CAD59B4BD58B976DBD084080F4E21CDC3D
+:10276000CB757418ED76F821AE282C601320FEF09E
+:10277000984AA365C7A4ACBE409755DF4E883A3D42
+:102780005198BE33ACCFCAE99604C5D790E1DF1D9E
+:10279000DAF6E51CFC92D74D3E2D49B3B8E96A0C38
+:1027A000DFE9F78C4B690B9A875AF7FE9780C1CF08
+:1027B000AB20CEEDB5D0C76D0D8C727B1D4C725B1E
+:1027C0000B53DCD6C1596E57802ED3222BC1948176
+:1027D000AF5E26B87F2324B96D86C4FB742774B01E
+:1027E0006CDB0AB257EFBBE864D3398FBE332EB42B
+:1027F000E961D3FD2132D20D17E66B2A2CEC6F5B19
+:10280000D314E3D7A2A01DFF0A39B7E7990FC7BABF
+:1028100071979F70D7CAB9727021DC65E3C4FF035A
+:1028200008E97101B048000000000000000000004D
+:102830000000001800000000000000000000004040
+:102840000000000000000000000000280000000060
+:102850000000000000000010000000000000000068
+:102860000000002000000000000000000000001038
+:102870000000000000000000000000080000000050
+:102880000000000000000000000000000000000048
+:102890000000000000000000000000000000000038
+:1028A0000000000000000000000000000000000028
+:1028B0000000000000000000000000000000000018
+:1028C0000000000000000000000000000000000008
+:1028D00000000000000000000000000000000000F8
+:1028E00000000000000000000000000000000000E8
+:1028F00000000000000000000000000000000000D8
+:1029000000000000000000000000000000000000C7
+:1029100000000000000000000000000000000000B7
+:1029200000000000000000000000000000000000A7
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000000000087
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:102970000000000000000000000000000000000057
+:102980000000000000000000000000000000000047
+:102990000000000000000000000090000010000097
+:1029A0000000000800009008001000000000000275
+:1029B00000009000001000000000001000009DA822
+:1029C000000000000000000880000000000000007F
+:1029D0000000000080000000000000000000000077
+:1029E000800000000000000000000000000091A036
+:1029F0000000000000000008000093C00001000477
+:102A000000000001000093C8000000000000000268
+:102A1000000093D00000000000000008000093D4E4
+:102A20000000000000000002000094980000000078
+:102A300000000008000093D8000800000000000813
+:102A400000009B3800400000000000400000941887
+:102A50000008000000000008000094580008000072
+:102A600000000008000094A800C8000000000098C2
+:102A700000009638009800000000002800009678BA
+:102A800000980000000000280000C0000540003051
+:102A9000000005400000CB200008000000000001FD
+:102AA0000000CB2100080000000000010000200809
+:102AB00000100000000000100000200000000000D6
+:102AC0000000000800009D600008000000000002F7
+:102AD00000009DA0000000000000000100000000B8
+:102AE00000000000000000000000000000000000E6
+:102AF00000000000000000000000000000000000D6
+:102B000080000000000000000000000080000000C5
+:102B10000000000000000000800000000000000035
+:102B20000000000080000000000000000000000025
+:102B30008000000000000000000000008000000095
+:102B40000000000000000000800000000000000005
+:102B500000000000800000000000000000000000F5
+:102B60008000000000000000000000008000000065
+:102B700000000000000000008000000000000000D5
+:102B800000000000800000000000000000000000C5
+:102B900080000000000000000000000000000000B5
+:102BA0000000000000000000000000000000000025
+:102BB0000000000000000000000000000000000015
+:102BC0000000000000000000000000000000000005
+:102BD0000000000000000000800000000000000075
+:102BE0000000000080000000000000000000000065
+:102BF0008000000000000000000000000000000055
+:102C00000000000000000000800000000000000044
+:102C10000000000080000000000000000000000034
+:102C20008000000000000000000000000000000024
+:102C30000000000000000000000000000000000094
+:102C40000000000000000000000000000000000084
+:102C50000000000000000000000000000000000074
+:102C60000000000000000000000000000000000064
+:102C700000000000000012C800800000000000807A
+:102C80000000000100000000000000000000A000A3
+:102C9000071000000000071000001EC80000000020
+:102CA000000000080000AEC000080000000000089E
+:102CB0000000AE4000080000000000080000AE80E8
+:102CC00000080000000000080000200800100000BC
+:102CD00000000010000020000000000000000008BC
+:102CE0000000A01007100040000000400000AF40AE
+:102CF00000080000000000010000AF4100080000D3
+:102D00000000000100001ED00000000000000001D3
+:102D100000001ED8000000000000000200001EDAC3
+:102D20000000000000000002000012B000080000D7
+:102D3000000000088000000000000000000000000B
+:102D40008000000000000000000000008000000083
+:102D500000000000000000008000000000000000F3
+:102D600000000000800000000000000000000000E3
+:102D70008000000000000000000000008000000053
+:102D800000000000000000008000000000000000C3
+:102D900000000000800000000000000000000000B3
+:102DA0000000000000000000000000000000000023
+:102DB0000000000000000000000000000000000013
+:102DC0000000000000000000000000000000000003
+:102DD0000000000000000000000000008000000073
+:102DE0000000000000000000800000000000000063
+:102DF00000000000000000000000000000000000D3
+:102E000080000000000000000000000080000000C2
+:102E10000000000000000000800000000000000032
+:102E20000000000080000000000000000000000022
+:102E30000000B00000180000000000180000B300FF
+:102E400000400000000000400000B300004000020D
+:102E5000000000010000B30100400002000000007B
+:102E600000008000004000000000004080000000E2
+:102E7000000000000000000000008000000800408A
+:102E8000000000040000800400080040000000046E
+:102E90000000BB0000280000000000280000BC402B
+:102EA00000100000000000100000880000800000FA
+:102EB0000000008000008800000800800000000280
+:102EC00000008C000020000000000020000020080E
+:102ED00000100000000000100000200000000000B2
+:102EE00000000008000011080008000000000008B1
+:102EF000000011680008000000000008000011A890
+:102F00000008000000000008000012700008000027
+:102F10000000000100001271000800000000000124
+:102F200000008D00001000040000000400001320C9
+:102F300000300018000000100000132800300018B6
+:102F400000000002800000000000000000000000FF
+:102F5000800000000000000000000000000011E8F8
+:102F600000000000000000018000000000000000E0
+:102F700000000000800000000000000000000000D1
+:102F80008000000000000000000000008000000041
+:102F900000000000000000008000000000000000B1
+:102FA00000000000800000000000000000000000A1
+:102FB0000000000000000000000000000000000011
+:102FC0000000000000000000000000000000000001
+:102FD00000000000000000000000000000000000F1
+:102FE00080000000000000000000000080000000E1
+:102FF00000000000000000000000000000000000D1
+:103000000000000000008308008000000000008035
+:103010000000000100000000000000000000200887
+:103020000010000000000010000020000000000060
+:103030000000000800008D100008000000000008DB
+:1030400000008D700008000000000008000084509F
+:10305000046000280000046000008EA0000800004A
+:103060000000000100008EA1000800000000000127
+:1030700000008408000800000000000800008448E8
+:10308000000000000000000100008DF400080000B6
+:103090000000000200008DF60008000000000002A1
+:1030A00000008E04001000000000000480000000FA
+:1030B0000000000000000000800000000000000090
+:1030C0000000000080000000000000000000000080
+:1030D00000000000000000000000000000000000F0
+:1030E00000000000000000000000000000000000E0
+:1030F00000000000000000000000000000000000D0
+:1031000080000000000000000000000080000000BF
+:1031100000000000000000000000000000000000AF
+:10312000000000008000000000000000000000001F
+:10313000800000000000000000000000800000008F
+:1031400000000000000000008000000000000000FF
+:1031500000000000000030000040000000000008F7
+:1031600000003008004000000000002800003390FC
+:1031700001C0001000000008000032000020000024
+:1031800000000020000037200000000000000008C0
+:103190000000102006200038000000080000A000F9
+:1031A000000000000000200000003EA90000000018
+:1031B0000000000100003EC8000000000000000206
+:1031C00000001C4000E00008000000088000000033
+:1031D00000000000000000000000400000080000A7
+:1031E0000000000100004001000800000000000194
+:1031F00000004040000800040000000200004060A1
+:103200000008000400000004000040000008000066
+:10321000000000040000400400080000000000045A
+:10322000000040400000000000000008000040488E
+:103230000000000000000008000080000000000006
+:1032400000000010000050400001000400000001D8
+:1032500000005000000000000000002000005008A6
+:1032600000100000000000040000500C00100000DE
+:1032700000000001000052C7000000000000000133
+:10328000000052C6000000000000000100003000F5
+:103290000030001800000004000030040030001866
+:1032A0000000000400003008003000180000000298
+:1032B0000000300A00300018000000020000300C4E
+:1032C00000300018000000010000300D0030001830
+:1032D000000000010000300E003000180000000166
+:1032E000000030100030001800000004000030140E
+:1032F00000300018000000040000500001000080B1
+:1033000000080004000050040100008000080004D0
+:103310000000000A000000000000000000005068EB
+:1033200001000080000000010000506901000080E1
+:10333000000000010000506C01000080000000024D
+:103340000000506E0100008000000002000050707C
+:1033500001000080000000040000507401000080A3
+:103360000000000400005066010000800000000220
+:103370000000506401000080000000010000506067
+:103380000100008000000002000050620100008087
+:103390000000000200005050010000800000000406
+:1033A000000050540100008000000004000050584C
+:1033B00001000080000000040000505C010000805B
+:1033C000000000040000507C0100008000000001AB
+:1033D0000000507D01000080000000010000401846
+:1033E00000100000000000040000409000100000E9
+:1033F00000000004000040980010000000000004DD
+:103400000000411000000000000000020000411216
+:103410000000000000000002000041140000000055
+:103420000000000200004116000000000000000241
+:103430000000604000080000000000020000604240
+:1034400000080000000000020000604400080000C6
+:103450000000000400006080000800000000000878
+:10346000000060C00040000800000008000060008C
+:1034700000080000000000020000600200080000D8
+:1034800000000001000060040008000000000002CD
+:103490000000634000080000000000080000638096
+:1034A0000008000000000004000063840008000021
+:1034B00000000001000063C00008000000000002DE
+:1034C000000063C400080000000000020000640067
+:1034D0000008000000000004000070000010000060
+:1034E0000000000400007004001000000000000450
+:1034F00000007008001000000000000400007000D0
+:103500000008000000000002000070020008000037
+:10351000000000010000700400080000000000022C
+:10352000000070400008000000000002000070442D
+:1035300000080000000000020000704600080000C3
+:1035400000000002000076480008000000000008AB
+:10355000000070800008000000000002000070847D
+:10356000000800000000000200007688000800004B
+:10357000000000080000804000080000000000017A
+:1035800000008041000800000000000100008042AF
+:103590000008000000000001000080430008000057
+:1035A0000000000100008000000800000000000290
+:1035B00000008002000800000000000100008004FC
+:1035C0000008000000000002000080C000080000A9
+:1035D00000000002000080C200080000000000029D
+:1035E000000080C40008000000000002000080808D
+:1035F00000080000000000010000808100080000B9
+:1036000000000001000080820008000000000001AE
+:10361000000080830008000000000001000080849A
+:103620000008000000000001000080850008000084
+:10363000000000010000808600080000000000017A
+:1036400000006000000800000000000200006002AE
+:1036500000080000000000010000600400080000F5
+:10366000000000020000604200C0001800000002DC
+:103670000000604000C00018000000020000604C24
+:1036800000C00018000000080000604400C00018DE
+:10369000000000080000605700C000180000000192
+:1036A0000000605400C000180000000200006056D6
+:1036B00000C0001800000001000066400008000083
+:1036C00000000008000066800008000000000008FC
+:1036D000000066C000080000000000080000D94299
+:1036E00000180000000000020000DE4000000000A2
+:1036F000000000000000E0000000000000000004E6
+:103700000000DD4000000000000000040000DD4477
+:1037100000000000000000040000DD480000000080
+:10372000000000040000DD4C000000000000000468
+:103730000000DD5000000000000000040000DD5427
+:1037400000000000000000040000DD580000000040
+:10375000000000040000DD40000000000000002028
+:103760000000DA0000000000000000040000DA00A1
+:1037700000000000000000680000BB6000000000C6
+:10378000000000000000D000000000000000000465
+:103790000000B0C000000000000000040000B0C441
+:1037A00000000000000000040000B0C8000000009D
+:1037B000000000040000B0C0000000000000001085
+:1037C0000000D6B000000000000000040000D6B4E5
+:1037D00000000000000000040000D6B80000000057
+:1037E000000000040000D6BC00000000000000043F
+:1037F0000000D6B000000000000000100000D34818
+:1038000000000000000000080000D3580000000085
+:103810000000008000000010000000000000000018
+:103820000000D35800000000000000080000000065
+:0838300006020900000000007F
+:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex
deleted file mode 100644
index aef9aa6..0000000
--- a/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex
+++ /dev/null
@@ -1,15456 +0,0 @@
-:1000000000005310000000680000070C000053803F
-:100010000000318000005A90000000B000008C18F1
-:100020000000C13400008CD0000000D800014E0850
-:100030000000F1F000014EE800000074000240E012
-:100040000000525C00024158000000B8000293B862
-:100050000001213C0002947800000FFC0003B5B8B9
-:10006000000000040003C5B8020400480000000FAF
-:1000700002040054000000450204005C0000000679
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040258000000360204025C000000365F
-:10017000020402600810000002040264081000007B
-:1001800002040004000000FF02040008000000FF59
-:100190000204000C000000FF02040010000000FF39
-:1001A000020400140000007F02040018000000FF99
-:1001B0000204001C000000FF02040020000000FFF9
-:1001C000020400240000003E020400280000000099
-:1001D0000204002C0000003F020400300000003F39
-:1001E000020400340000003F020400380000003F19
-:1001F0000204003C0000003F020400400000003FF9
-:10020000020400440000003F020404CC000000018E
-:1002100002042008000002110204200C0000020069
-:10022000020420100000020402042014000002193D
-:100230000204201C0000FFFF020420200000FFFF3A
-:10024000020420240000FFFF020420280000FFFF1A
-:1002500002042038000000200604203C0000000FAB
-:1002600002042078000000210604207C0000000F1A
-:10027000020420B800000001060420BC0000000FAA
-:10028000020420F800000001060420FC0000003FEA
-:10029000020421F800000001060421FC0000000F08
-:1002A0000204223807FFFFFF0204223C0000007F07
-:1002B0000204224007FFFFFF020422440000003F27
-:1002C00001042248000000000104224C000000004C
-:1002D000010422500000000001042254000000002C
-:1002E00001042258000000000104225C000000000C
-:1002F00001042260000000000104226400000000EC
-:1003000001042268000000000104226C00000000CB
-:1003100001042270000000000104227400000000AB
-:1003200001042278000000000104227C000000008B
-:10033000020422C00000FFFF020422C40000FFFFED
-:10034000020422C80000FFFF020422CC0000FFFFCD
-:100350000C042000000003E80A0420000000000153
-:100360000B042000000000030605400000000D0003
-:100370000205004400000020020500480000003291
-:1003800002050090021500200205009402150020CD
-:1003900002050098000000300205009C08100000D3
-:1003A000020500A000000036020500A40000003095
-:1003B000020500A800000031020500B000000004A2
-:1003C000020500B400000005020500C000000000A6
-:1003D000020500C400000004020500D40000000172
-:1003E00002050114000000010205011C00000001CB
-:1003F00002050120000000020205020400000001C5
-:100400000205020C0000004002050210000000403E
-:100410000205021C00000020020502200000001C52
-:100420000205022400000020060502400000000A28
-:1004300004050280002000000205005000000007B3
-:1004400002050054000000070205005800000000EB
-:100450000205005C000000080205006000000001C9
-:100460000605006400000003020500D80000000635
-:100470000205000400000001020500080000000160
-:100480000205000C00000001020500100000000140
-:100490000205001400000001020500180000000120
-:1004A0000205001C00000001020500200000000100
-:1004B00002050024000000010205002800000001E0
-:1004C0000205002C000000010205003000000001C0
-:1004D00002050034000000010205003800000001A0
-:1004E0000205003C00000001020500400000000180
-:1004F000020500E00000000D020500E80000000019
-:10050000020500F000000000020500F800000000F5
-:10051000020500E40000002D020500EC00000020B0
-:10052000020500F400000020020500FC000000208D
-:10053000020500E00000001D020500E800000010B8
-:10054000020500F000000010020500F80000001095
-:10055000020500E40000003D020500EC0000003050
-:10056000020500F400000030020500FC000000302D
-:10057000020500E00000004D020500E80000004018
-:10058000020500F000000040020500F800000040F5
-:10059000020500E40000006D020500EC00000060B0
-:1005A000020500F400000060020500FC000000608D
-:1005B000020500E00000005D020500E800000050B8
-:1005C000020500F000000050020500F80000005095
-:1005D000020500E40000007D020500EC0000007050
-:1005E000020500F400000070020500FC000000702D
-:1005F0000406100002000020020600DC00000001DA
-:100600000406020000030220020600DC00000000D5
-:100610000718040000AD0000081807D800050223E1
-:10062000071C000029920000071C8000312A0A657F
-:10063000071D000034A316B0071D80002E7A23D9B1
-:10064000071E000003502F78081E07F03F02022506
-:10065000021800BC0000003001180000000000007B
-:10066000011800040000000001180008000000004C
-:100670000118000C0000000001180010000000002C
-:100680000118001400000000021800200000000102
-:1006900002180024000000020218002800000003D5
-:1006A0000218002C000000000218003000000004B6
-:1006B0000218003400000001021800380000000099
-:1006C0000218003C00000001021800400000000475
-:1006D0000218004400000000021800480000000159
-:1006E0000218004C00000003021800500000000037
-:1006F0000218005400000001021800580000000415
-:100700000218005C000000000218006000000001F8
-:1007100002180064000000030218006800000000D6
-:100720000218006C000000010218007000000004B4
-:100730000218007400000000021800780000000495
-:100740000218007C00000003061800800000000270
-:10075000021800A400007FFF021800A8000003FF99
-:1007600002180224000000000218023400000000F9
-:100770000218024C00000000021802E4000000FF12
-:100780000618100000000400021B8BC000000001CE
-:10079000021B800000000034021B80400000001893
-:1007A000021B80800000000C021B80C000000020A3
-:1007B0000C1B8300000864700A1B830000000157B3
-:1007C0000B1B83000000055F0A1B83400000000034
-:1007D0000C1B8340000002260B1B8340000000011D
-:1007E000021B838000086470021B83C00000022685
-:1007F000021B1480000000010A1B1480000000008E
-:10080000021B944000000001061B944800000002F7
-:10081000061A1000000002B3041A1ACC00010227C5
-:10082000061A1AD000000008061A2008000000C8A6
-:10083000061A200000000002041A1BF8009002288B
-:10084000061A371800000004061A371000000002CC
-:10085000061A500000000002061A500800000004AA
-:10086000061A501800000004061A50280000000460
-:10087000061A503800000004061A50480000000410
-:10088000061A505800000004061A506800000004C0
-:10089000061A507800000002041A52C0000202B882
-:1008A000061A405000000006041A4068000202BA0E
-:1008B000041A4040000402BC041A8000000102C077
-:1008C000061A800400000003041A8010000102C10F
-:1008D000061A801400000003041A8020000102C2DE
-:1008E000061A802400000003041A8030000102C3AD
-:1008F000061A803400000003041A8040000102C47C
-:10090000061A804400000003041A8050000102C54A
-:10091000061A805400000003041A8060000102C619
-:10092000061A806400000003041A8070000102C7E8
-:10093000061A807400000003041A8080000102C8B7
-:10094000061A808400000003041A8090000102C986
-:10095000061A809400000003041A80A0000102CA55
-:10096000061A80A400000003041A80B0000102CB24
-:10097000061A80B400000003041A80C0000102CCF3
-:10098000061A80C400000003041A80D0000102CDC2
-:10099000061A80D400000003041A80E0000102CE91
-:1009A000061A80E400000003041A80F0000102CF60
-:1009B000061A80F400000003041A8100000102D02E
-:1009C000061A810400000003041A8110000102D1FC
-:1009D000061A811400000003041A8120000102D2CB
-:1009E000061A812400000003041A8130000102D39A
-:1009F000061A813400000003041A8140000102D469
-:100A0000061A814400000003041A8150000102D537
-:100A1000061A815400000003041A8160000102D606
-:100A2000061A816400000003041A8170000102D7D5
-:100A3000061A817400000003041A8180000102D8A4
-:100A4000061A818400000003041A8190000102D973
-:100A5000061A819400000003041A81A0000102DA42
-:100A6000061A81A400000003041A81B0000102DB11
-:100A7000061A81B400000003041A81C0000102DCE0
-:100A8000061A81C400000003041A81D0000102DDAF
-:100A9000061A81D400000003041A81E0000102DE7E
-:100AA000061A81E400000003041A81F0000102DF4D
-:100AB000061A81F400000003041A8200000102E01B
-:100AC000061A820400000003041A8210000102E1E9
-:100AD000061A821400000003041A8220000102E2B8
-:100AE000061A822400000003041A8230000102E387
-:100AF000061A823400000003041A8240000102E456
-:100B0000061A824400000003041A8250000102E524
-:100B1000061A825400000003041A8260000102E6F3
-:100B2000061A826400000003041A8270000102E7C2
-:100B3000061A827400000003041A8280000102E891
-:100B4000061A828400000003041A8290000102E960
-:100B5000061A829400000003041A82A0000102EA2F
-:100B6000061A82A400000003041A82B0000102EBFE
-:100B7000061A82B400000003041A82C0000102ECCD
-:100B8000061A82C400000003041A82D0000102ED9C
-:100B9000061A82D400000003041A82E0000102EE6B
-:100BA000061A82E400000003041A82F0000102EF3A
-:100BB000061A82F400000003041A8300000102F008
-:100BC000061A830400000003041A8310000102F1D6
-:100BD000061A831400000003041A8320000102F2A5
-:100BE000061A832400000003041A8330000102F374
-:100BF000061A833400000003041A8340000102F443
-:100C0000061A834400000003041A8350000102F511
-:100C1000061A835400000003041A8360000102F6E0
-:100C2000061A836400000003041A8370000102F7AF
-:100C3000061A837400000003041A8380000102F87E
-:100C4000061A838400000003041A8390000102F94D
-:100C5000061A839400000003041A83A0000102FA1C
-:100C6000061A83A400000003041A83B0000102FBEB
-:100C7000061A83B400000003041A83C0000102FCBA
-:100C8000061A83C400000003041A83D0000102FD89
-:100C9000061A83D400000003041A83E0000102FE58
-:100CA000061A83E400000003041A83F0000102FF27
-:100CB000061A83F400000003041A840000010300F4
-:100CC000061A840400000003041A841000010301C2
-:100CD000061A841400000003041A84200001030291
-:100CE000061A842400000003041A84300001030360
-:100CF000061A843400000003041A8440000103042F
-:100D0000061A844400000003041A845000010305FD
-:100D1000061A845400000003041A846000010306CC
-:100D2000061A846400000003041A8470000103079B
-:100D3000061A847400000003041A8480000103086A
-:100D4000061A848400000003041A84900001030939
-:100D5000061A849400000003041A84A00001030A08
-:100D6000061A84A400000003041A84B00001030BD7
-:100D7000061A84B400000003041A84C00001030CA6
-:100D8000061A84C400000003041A84D00001030D75
-:100D9000061A84D400000003041A84E00001030E44
-:100DA000061A84E400000003041A84F00001030F13
-:100DB000061A84F400000003041A850000010310E1
-:100DC000061A850400000003041A851000010311AF
-:100DD000061A851400000003041A8520000103127E
-:100DE000061A852400000003041A8530000103134D
-:100DF000061A853400000003041A8540000103141C
-:100E0000061A854400000003041A855000010315EA
-:100E1000061A855400000003041A856000010316B9
-:100E2000061A856400000003041A85700001031788
-:100E3000061A857400000003041A85800001031857
-:100E4000061A858400000003041A85900001031926
-:100E5000061A859400000003041A85A00001031AF5
-:100E6000061A85A400000003041A85B00001031BC4
-:100E7000061A85B400000003041A85C00001031C93
-:100E8000061A85C400000003041A85D00001031D62
-:100E9000061A85D400000003041A85E00001031E31
-:100EA000061A85E400000003041A85F00001031F00
-:100EB000061A85F400000003041A860000010320CE
-:100EC000061A860400000003041A8610000103219C
-:100ED000061A861400000003041A8620000103226B
-:100EE000061A862400000003041A8630000103233A
-:100EF000061A863400000003041A86400001032409
-:100F0000061A864400000003041A865000010325D7
-:100F1000061A865400000003041A866000010326A6
-:100F2000061A866400000003041A86700001032775
-:100F3000061A867400000003041A86800001032844
-:100F4000061A868400000003041A86900001032913
-:100F5000061A869400000003041A86A00001032AE2
-:100F6000061A86A400000003041A86B00001032BB1
-:100F7000061A86B400000003041A86C00001032C80
-:100F8000061A86C400000003041A86D00001032D4F
-:100F9000061A86D400000003041A86E00001032E1E
-:100FA000061A86E400000003041A86F00001032FED
-:100FB000061A86F400000003041A870000010330BB
-:100FC000061A870400000003041A87100001033189
-:100FD000061A871400000003041A87200001033258
-:100FE000061A872400000003041A87300001033327
-:100FF000061A873400000003041A874000010334F6
-:10100000061A874400000003041A875000010335C4
-:10101000061A875400000003041A87600001033693
-:10102000061A876400000003041A87700001033762
-:10103000061A877400000003041A87800001033831
-:10104000061A878400000003041A87900001033900
-:10105000061A879400000003041A87A00001033ACF
-:10106000061A87A400000003041A87B00001033B9E
-:10107000061A87B400000003041A87C00001033C6D
-:10108000061A87C400000003041A87D00001033D3C
-:10109000061A87D400000003041A87E00001033E0B
-:1010A000061A87E400000003041A87F00001033FDA
-:1010B000061A87F400000003041A880000010340A8
-:1010C000061A880400000003041A88100001034176
-:1010D000061A881400000003041A88200001034245
-:1010E000061A882400000003041A88300001034314
-:1010F000061A883400000003041A884000010344E3
-:10110000061A884400000003041A885000010345B1
-:10111000061A885400000003041A88600001034680
-:10112000061A886400000003041A8870000103474F
-:10113000061A887400000003041A8880000103481E
-:10114000061A888400000003041A889000010349ED
-:10115000061A889400000003041A88A00001034ABC
-:10116000061A88A400000003041A88B00001034B8B
-:10117000061A88B400000003041A88C00001034C5A
-:10118000061A88C400000003041A88D00001034D29
-:10119000061A88D400000003041A88E00001034EF8
-:1011A000061A88E400000003041A88F00001034FC7
-:1011B000061A88F400000003041A89000001035095
-:1011C000061A890400000003041A89100001035163
-:1011D000061A891400000003041A89200001035232
-:1011E000061A892400000003041A89300001035301
-:1011F000061A893400000003041A894000010354D0
-:10120000061A894400000003041A8950000103559E
-:10121000061A895400000003041A8960000103566D
-:10122000061A896400000003041A8970000103573C
-:10123000061A897400000003041A8980000103580B
-:10124000061A898400000003041A899000010359DA
-:10125000061A899400000003041A89A00001035AA9
-:10126000061A89A400000003041A89B00001035B78
-:10127000061A89B400000003041A89C00001035C47
-:10128000061A89C400000003041A89D00001035D16
-:10129000061A89D400000003041A89E00001035EE5
-:1012A000061A89E400000003041A89F00001035FB4
-:1012B000061A89F400000003041A8A000001036082
-:1012C000061A8A0400000003041A8A100001036150
-:1012D000061A8A1400000003041A8A20000103621F
-:1012E000061A8A2400000003041A8A3000010363EE
-:1012F000061A8A3400000003041A8A4000010364BD
-:10130000061A8A4400000003041A8A50000103658B
-:10131000061A8A5400000003041A8A60000103665A
-:10132000061A8A6400000003041A8A700001036729
-:10133000061A8A7400000003041A8A8000010368F8
-:10134000061A8A8400000003041A8A9000010369C7
-:10135000061A8A9400000003041A8AA00001036A96
-:10136000061A8AA400000003041A8AB00001036B65
-:10137000061A8AB400000003041A8AC00001036C34
-:10138000061A8AC400000003041A8AD00001036D03
-:10139000061A8AD400000003041A8AE00001036ED2
-:1013A000061A8AE400000003041A8AF00001036FA1
-:1013B000061A8AF400000003041A8B00000103706F
-:1013C000061A8B0400000003041A8B10000103713D
-:1013D000061A8B1400000003041A8B20000103720C
-:1013E000061A8B2400000003041A8B3000010373DB
-:1013F000061A8B3400000003041A8B4000010374AA
-:10140000061A8B4400000003041A8B500001037578
-:10141000061A8B5400000003041A8B600001037647
-:10142000061A8B6400000003041A8B700001037716
-:10143000061A8B7400000003041A8B8000010378E5
-:10144000061A8B8400000003041A8B9000010379B4
-:10145000061A8B9400000003041A8BA00001037A83
-:10146000061A8BA400000003041A8BB00001037B52
-:10147000061A8BB400000003041A8BC00001037C21
-:10148000061A8BC400000003041A8BD00001037DF0
-:10149000061A8BD400000003041A8BE00001037EBF
-:1014A000061A8BE400000003041A8BF00001037F8E
-:1014B000061A8BF400000003041A8C00000103805C
-:1014C000061A8C0400000003041A8C10000103812A
-:1014D000061A8C1400000003041A8C2000010382F9
-:1014E000061A8C2400000003041A8C3000010383C8
-:1014F000061A8C3400000003041A8C400001038497
-:10150000061A8C4400000003041A8C500001038565
-:10151000061A8C5400000003041A8C600001038634
-:10152000061A8C6400000003041A8C700001038703
-:10153000061A8C7400000003041A8C8000010388D2
-:10154000061A8C8400000003041A8C9000010389A1
-:10155000061A8C9400000003041A8CA00001038A70
-:10156000061A8CA400000003041A8CB00001038B3F
-:10157000061A8CB400000003041A8CC00001038C0E
-:10158000061A8CC400000003041A8CD00001038DDD
-:10159000061A8CD400000003041A8CE00001038EAC
-:1015A000061A8CE400000003041A8CF00001038F7B
-:1015B000061A8CF400000003041A8D000001039049
-:1015C000061A8D0400000003041A8D100001039117
-:1015D000061A8D1400000003041A8D2000010392E6
-:1015E000061A8D2400000003041A8D3000010393B5
-:1015F000061A8D3400000003041A8D400001039484
-:10160000061A8D4400000003041A8D500001039552
-:10161000061A8D5400000003041A8D600001039621
-:10162000061A8D6400000003041A8D7000010397F0
-:10163000061A8D7400000003041A8D8000010398BF
-:10164000061A8D8400000003041A8D90000103998E
-:10165000061A8D9400000003041A8DA00001039A5D
-:10166000061A8DA400000003041A8DB00001039B2C
-:10167000061A8DB400000003041A8DC00001039CFB
-:10168000061A8DC400000003041A8DD00001039DCA
-:10169000061A8DD400000003041A8DE00001039E99
-:1016A000061A8DE400000003041A8DF00001039F68
-:1016B000061A8DF400000003041A8E00000103A036
-:1016C000061A8E0400000003041A8E10000103A104
-:1016D000061A8E1400000003041A8E20000103A2D3
-:1016E000061A8E2400000003041A8E30000103A3A2
-:1016F000061A8E3400000003041A8E40000103A471
-:10170000061A8E4400000003041A8E50000103A53F
-:10171000061A8E5400000003041A8E60000103A60E
-:10172000061A8E6400000003041A8E70000103A7DD
-:10173000061A8E7400000003041A8E80000103A8AC
-:10174000061A8E8400000003041A8E90000103A97B
-:10175000061A8E9400000003041A8EA0000103AA4A
-:10176000061A8EA400000003041A8EB0000103AB19
-:10177000061A8EB400000003041A8EC0000103ACE8
-:10178000061A8EC400000003041A8ED0000103ADB7
-:10179000061A8ED400000003041A8EE0000103AE86
-:1017A000061A8EE400000003041A8EF0000103AF55
-:1017B000061A8EF400000003041A8F00000103B023
-:1017C000061A8F0400000003041A8F10000103B1F1
-:1017D000061A8F1400000003041A8F20000103B2C0
-:1017E000061A8F2400000003041A8F30000103B38F
-:1017F000061A8F3400000003041A8F40000103B45E
-:10180000061A8F4400000003041A8F50000103B52C
-:10181000061A8F5400000003041A8F60000103B6FB
-:10182000061A8F6400000003041A8F70000103B7CA
-:10183000061A8F7400000003041A8F80000103B899
-:10184000061A8F8400000003041A8F90000103B968
-:10185000061A8F9400000003041A8FA0000103BA37
-:10186000061A8FA400000003041A8FB0000103BB06
-:10187000061A8FB400000003041A8FC0000103BCD5
-:10188000061A8FC400000003041A8FD0000103BDA4
-:10189000061A8FD400000003041A8FE0000103BE73
-:1018A000061A8FE400000007041A62C0002003BF7C
-:1018B000061A1AF000000042061AAF0000000008E5
-:1018C000061AE00000000540061AD0000000007271
-:1018D000061AD24800000010061AD6B000000020F8
-:1018E000061AD47000000090061AD46800000002A6
-:1018F000061AA000000001C4061A30000000001003
-:10190000061A308000000010061A31000000001096
-:10191000061A318000000010061A33000000001281
-:10192000061A339000000070061AD4580000000216
-:10193000061AD34800000002061AD35800000020FF
-:10194000061AA710000001C4061A3040000000105B
-:10195000061A30C000000010061A314000000010C6
-:10196000061A31C000000010061A334800000012A9
-:10197000061A355000000070061AD46000000002FC
-:10198000061AD35000000002061AD3D80000002027
-:10199000021AAE2000000000061A500000000002EB
-:1019A000061A508000000012041A4000000203DFF3
-:1019B000041A63C0000203E1061A7000000000046C
-:1019C000061A320000000008021AAE2400000000CF
-:1019D000061A501000000002061A50C8000000123B
-:1019E000041A4008000203E3041A63C8000203E576
-:1019F000061A701000000004061A322000000008C9
-:101A0000021AAE2800000000061A50200000000252
-:101A1000061A511000000012041A4010000203E7D9
-:101A2000041A63D0000203E9061A702000000004C3
-:101A3000061A324000000008021AAE2C0000000016
-:101A4000061A503000000002061A51580000001219
-:101A5000041A4018000203EB041A63D8000203EDD5
-:101A6000061A703000000004061A326000000008F8
-:101A7000021AAE3000000000061A504000000002BA
-:101A8000061A51A000000012041A4020000203EFC1
-:101A9000041A63E0000203F1061A7040000000041B
-:101AA000061A328000000008021AAE34000000005E
-:101AB000061A505000000002061A51E800000012F9
-:101AC000041A4028000203F3041A63E8000203F535
-:101AD000061A705000000004061A32A00000000828
-:101AE000021AAE3800000000061A50600000000222
-:101AF000061A523000000012041A4030000203F7A8
-:101B0000041A63F0000203F9061A70600000000472
-:101B1000061A32C000000008021AAE3C00000000A5
-:101B2000061A507000000002061A527800000012D7
-:101B3000041A4038000203FB041A63F8000203FD94
-:101B4000061A707000000004061A32E00000000857
-:101B50000200A2A4000002090200A270000000001E
-:101B60000200A274000000000200A2700000000049
-:101B70000200A274000000000200A2700000000039
-:101B80000200A274000000000200A2700000000029
-:101B90000200A27400000000020100B40000000175
-:101BA000020100B800000001020100CC00000001A9
-:101BB000020100D000000001020100DC0000000171
-:101BC0000201010000000001020101040000000107
-:101BD0000201007C003000000201008400000028A7
-:101BE0000201008C0000000002010130000000042E
-:101BF0000201025C00000001020103280000000055
-:101C0000020160580000FFFF020160700000000741
-:101C10000201055400000030020100C40000000170
-:101C2000020100F800000001020100F000000001C4
-:101C3000020100800030000002010088000000283E
-:101C400002010090000000000201013400000004C5
-:101C5000020102DC000000010201032C0000000070
-:101C60000201605C0000FFFF0201607400000007D9
-:101C70000201056400000030020100C800000001FC
-:101C8000020100FC00000001020100F4000000015C
-:101C9000020C100000000028020C200800000211B5
-:101CA000020C200C00000200020C201000000204B4
-:101CB000020C201C0000FFFF020C20200000FFFF90
-:101CC000020C20240000FFFF020C20280000FFFF70
-:101CD000020C203800000000020C203C00000037FD
-:101CE000020C204000000021020C204400000020D3
-:101CF000060C20480000001D020C20BC0000000162
-:101D0000060C20C00000003F020C21BC00000001B6
-:101D1000020C21C000000001020C21C400000001DF
-:101D2000060C21C80000001C020C223807FFFFFF30
-:101D3000020C223C0000007F020C224007FFFFFF44
-:101D4000020C22440000003F010C22480000000069
-:101D5000010C224C00000000010C22500000000089
-:101D6000010C225400000000010C22580000000069
-:101D7000010C225C00000000010C22600000000049
-:101D8000010C226400000000010C22680000000029
-:101D9000010C226C00000000010C22700000000009
-:101DA000010C227400000000010C227800000000E9
-:101DB000010C227C00000000020C22D80000FFFF72
-:101DC000020C22DC0000FFFF020C22E00000FFFFFB
-:101DD000020C22E40000FFFF0C0C2000000003E8CE
-:101DE0000A0C2000000000010B0C20000000000382
-:101DF000020C400800001011020C400C0000100002
-:101E0000020C401000001004020C401400001021CD
-:101E1000020C401C0000FFFF020C40200000FFFFEE
-:101E2000020C40240000FFFF020C40280000FFFFCE
-:101E3000020C403800000046020C403C0000000C40
-:101E4000060C404000000002020C40480000001850
-:101E5000020C404C000000F0060C40500000001F37
-:101E6000020C40CC00000001060C40D00000003AFB
-:101E7000020C41B800000001060C41BC0000000348
-:101E8000020C41C800000001020C41CC000000011E
-:101E9000060C41D00000001A020C423807FFFFFF79
-:101EA000020C423C0000007F020C424007FFFFFF93
-:101EB000020C42440000003F010C424800000000B8
-:101EC000010C424C00000000010C425000000000D8
-:101ED000010C425400000000010C425800000000B8
-:101EE000010C425C00000000010C42600000000098
-:101EF000010C426400000000010C42680000000078
-:101F0000010C426C00000000010C42700000000057
-:101F1000010C427400000000010C42780000000037
-:101F2000010C427C00000000010C42800000000017
-:101F3000020C42D80000FFFF020C42DC0000FFFF51
-:101F4000020C42E00000FFFF020C42E40000FFFF31
-:101F50000C0C4000000003E80A0C400000000001E7
-:101F60000B0C400000000003060D400000000A00BA
-:101F7000020D004400000032020D008C021500200A
-:101F8000020D009002150020020D009408100000C0
-:101F9000020D009800000036020D00A000000000B5
-:101FA000020D00A400000004020D00A800000004BF
-:101FB000060D00AC00000002020D00B80000000297
-:101FC000020D00C000000001020D00C80000000268
-:101FD000020D00CC00000002020D015C00000001B7
-:101FE000020D016400000001020D01680000000202
-:101FF000020D020400000001020D020C000000208E
-:10200000020D021000000040020D0214000000400A
-:10201000020D022000000003020D0224000000183F
-:10202000060D028000000012040D0300001803FFDB
-:10203000060D03600000000C020D004C00000001C2
-:10204000020D005000000002020D005400000000CC
-:10205000020D005800000008060D005C000000049E
-:10206000020D00C400000004020D00040000000185
-:10207000020D000800000001020D000C000000012C
-:10208000020D001000000001020D0014000000010C
-:10209000020D001800000001020D001C00000001EC
-:1020A000020D002000000001020D002400000001CC
-:1020B000020D002800000001020D002C00000001AC
-:1020C000020D003000000001020D0034000000018C
-:1020D000020D003800000001020D003C000000016C
-:1020E000020D011400000009020D011C0000000A8D
-:1020F000020D012400000000020D012C0000000070
-:10210000020D013400000000020D013C0000000B34
-:10211000020D014400000000020D0118000000291A
-:10212000020D01200000002A020D012800000020FD
-:10213000020D013000000020020D013800000020D7
-:10214000020D01400000002B020D0148000000209C
-:10215000020D011400000019020D011C0000001AFC
-:10216000020D012400000010020D012C00000010DF
-:10217000020D013400000010020D013C0000001BA4
-:10218000020D014400000010020D0118000000398A
-:10219000020D01200000003A020D0128000000306D
-:1021A000020D013000000030020D01380000003047
-:1021B000020D01400000003B020D0148000000300C
-:1021C000020D011400000049020D011C0000004A2C
-:1021D000020D012400000040020D012C000000400F
-:1021E000020D013400000040020D013C0000004BD4
-:1021F000020D014400000040020D011800000069BA
-:10220000020D01200000006A020D0128000000609C
-:10221000020D013000000060020D01380000006076
-:10222000020D01400000006B020D0148000000603B
-:10223000020D011400000059020D011C0000005A9B
-:10224000020D012400000050020D012C000000507E
-:10225000020D013400000050020D013C0000005B43
-:10226000020D014400000050020D01180000007929
-:10227000020D01200000007A020D0128000000700C
-:10228000020D013000000070020D013800000070E6
-:10229000020D01400000007B020D014800000070AB
-:1022A000060E200000000800020E004C0000003264
-:1022B000020E009402150020020E00980215002064
-:1022C000020E009C00000030020E00A0081000006A
-:1022D000020E00A400000036020E00A8000000302C
-:1022E000020E00AC00000031020E00B4000000033A
-:1022F000020E00B800000000020E00C40000000042
-:10230000020E00CC00000006020E00D80000000102
-:10231000020E014400000001020E014C0000000109
-:10232000020E015000000002020E02040000000133
-:10233000020E020C00000040020E021000000040DD
-:10234000020E021C00000004020E02200000002009
-:10235000020E02240000000E020E02280000001BE4
-:10236000060E030000000012040E0280001B04177A
-:10237000060E02EC00000005020E00540000000CE6
-:10238000020E00580000000C020E005C000000006D
-:10239000020E006000000010020E00640000001039
-:1023A000060E006800000003020E00DC00000003BF
-:1023B000020E000400000001020E000800000001EF
-:1023C000020E000C00000001020E001000000001CF
-:1023D000020E001400000001020E001800000001AF
-:1023E000020E001C00000001020E0020000000018F
-:1023F000020E002400000001020E0028000000016F
-:10240000020E002C00000001020E0030000000014E
-:10241000020E003400000001020E0038000000012E
-:10242000020E003C00000001020E0040000000010E
-:10243000020E004400000001020E01100000000F17
-:10244000020E011800000000020E01200000000032
-:10245000020E012800000000020E01140000002FEF
-:10246000020E011C00000020020E012400000020CA
-:10247000020E012C00000020020E01100000001FBF
-:10248000020E011800000010020E012000000010D2
-:10249000020E012800000010020E01140000003F8F
-:1024A000020E011C00000030020E0124000000306A
-:1024B000020E012C00000030020E01100000004F3F
-:1024C000020E011800000040020E01200000004032
-:1024D000020E012800000040020E01140000006FEF
-:1024E000020E011C00000060020E012400000060CA
-:1024F000020E012C00000060020E01100000005FBF
-:10250000020E011800000050020E012000000050D1
-:10251000020E012800000050020E01140000007F8E
-:10252000020E011C00000070020E01240000007069
-:10253000020E012C000000700730040000D60000DD
-:10254000083007D80005043207340000322A0000A2
-:102550000734800031300C8B0735000038D018D894
-:10256000073580002F82270D07360000263632EE11
-:102570000836710031E00434023000BC0000003045
-:1025800001300000000000000130000400000000E5
-:1025900001300008000000000130000C00000000C5
-:1025A00001300010000000000130001400000000A5
-:1025B0000230002000000001023000240000000270
-:1025C00002300028000000030230002C0000000050
-:1025D000023000300000000402300034000000012E
-:1025E00002300038000000000230003C0000000112
-:1025F00002300040000000040230004400000000EF
-:1026000002300048000000010230004C00000003CE
-:1026100002300050000000000230005400000001B1
-:1026200002300058000000040230005C000000008E
-:10263000023000600000000102300064000000036E
-:1026400002300068000000000230006C0000000151
-:10265000023000700000000402300074000000002E
-:1026600002300078000000040230007C000000030B
-:102670000630008000000002023000A400007FFF4E
-:10268000023000A8000003FF023002240000000016
-:1026900002300234000000000230024C0000000052
-:1026A000023002E40000FFFF0630200000000800B6
-:1026B00002338BC000000001023380000000001ACA
-:1026C000023380400000004E023380800000001082
-:1026D000023380C0000000200C33830000086470C7
-:1026E0000A338300000001570B3383000000055FAD
-:1026F0000A338340000000000C33834000000226B0
-:102700000B338340000000010233838000086470B3
-:10271000023383C00000022602331480000000014F
-:102720000A3314800000000006328000000001021D
-:1027300006322008000000C8063220000000000217
-:1027400004328520008F04360632875C00000009C1
-:1027500006323EB00000000606323ED00000000205
-:1027600006323E800000000A04323EA8000204C582
-:1027700006323E00000000200632500000000940F2
-:102780000632400000000004043294C0000204C776
-:1027900006324110000000020632D0000000007036
-:1027A0000632DB00000000D40632DEA0000000028A
-:1027B0000632E00000000800063324000000011883
-:1027C0000632100000000188063250000000002090
-:1027D00006325100000000200632520000000020A6
-:1027E0000632530000000020063254000000002092
-:1027F000063255000000002006325600000000207E
-:102800000632570000000020063258000000002069
-:10281000063259000000002006325A000000002055
-:1028200006325B000000002006325C000000002041
-:1028300006325D000000002006325E00000000202D
-:1028400006325F0000000020063284F00000000223
-:1028500004328500000204C9063285080000000227
-:102860000632DE90000000020633286000000118E6
-:102870000632162000000188063250800000002039
-:1028800006325180000000200632528000000020F5
-:1028900006325380000000200632548000000020E1
-:1028A00006325580000000200632568000000020CD
-:1028B00006325780000000200632588000000020B9
-:1028C000063259800000002006325A8000000020A5
-:1028D00006325B800000002006325C800000002091
-:1028E00006325D800000002006325E80000000207D
-:1028F00006325F8000000020063284F800000002EB
-:1029000004328510000204CB063285180000000254
-:102910000632DE98000000020232845000000000FF
-:102920000632401000000002023284540000000011
-:1029300006324020000000020232845800000000ED
-:1029400006324030000000020232845C00000000C9
-:1029500006324040000000020232846000000000A5
-:102960000632405000000002023284640000000081
-:10297000063240600000000202328468000000005D
-:1029800006324070000000020232846C0000000039
-:10299000063240800000000207200400007300009F
-:1029A00008200780001004CD072400002AF1000051
-:1029B0000724800027670ABD0824D35063FC04CF96
-:1029C000022000BC000000300120000000000000D8
-:1029D00001200004000000000120000800000000A9
-:1029E0000120000C00000000012000100000000089
-:1029F000012000140000000002200020000000015F
-:102A00000220002400000002022000280000000331
-:102A10000220002C00000000022000300000000412
-:102A200002200034000000010220003800000000F5
-:102A30000220003C000000010220004000000004D1
-:102A400002200044000000000220004800000001B5
-:102A50000220004C00000003022000500000000093
-:102A60000220005400000001022000580000000471
-:102A70000220005C00000000022000600000000155
-:102A80000220006400000003022000680000000033
-:102A90000220006C00000001022000700000000411
-:102AA00002200074000000000220007800000004F2
-:102AB0000220007C000000030620008000000002CD
-:102AC000022000A400007FFF022000A8000003FFF6
-:102AD0000220022400000000022002340000000056
-:102AE0000220024C00000000022002E40000FFFF70
-:102AF000062020000000080002238BC00000000117
-:102B00000223800000000010022380400000001219
-:102B10000223808000000030022380C00000000EED
-:102B20000C238300000864700A238300000001570F
-:102B30000B2383000000055F0A2383400000000090
-:102B40000C238340000002260B2383400000000179
-:102B50000223838000086470022383C000000226E1
-:102B600002231480000000010A23148000000000EA
-:102B7000062210000000004206222008000000C8C3
-:102B800006222000000000020622B00000000330F0
-:102B90000622F400000000530422F54C000104D189
-:102BA0000622F550000000030422F55C000104D267
-:102BB0000622F560000000030422F56C000104D336
-:102BC0000622F570000000030422F57C000104D405
-:102BD0000622F580000000030422F58C000104D5D4
-:102BE0000622F590000000030422F59C000104D6A3
-:102BF0000622F5A0000000030422F5AC000104D772
-:102C00000622F5B0000000030422F5BC000104D840
-:102C10000622F5C0000000460622E2000000044043
-:102C200004221240009004D906223000000000C0A7
-:102C30000622670000000100062290000000040048
-:102C400004226B0800200569062211F0000000062E
-:102C50000422120800060589062212200000000244
-:102C600006224000000005C00622C0000000000649
-:102C70000422C0180006058F0622C0300000000A9A
-:102C80000422C058000605950622C0700000000A04
-:102C90000422C0980006059B0622C0B00000000A6E
-:102CA0000422C0D8000605A10622C0F00000000AD8
-:102CB0000422C118000605A70622C1300000000A40
-:102CC0000422C158000605AD0622C1700000000AAA
-:102CD0000422C198000605B30622C1B00000000A14
-:102CE0000422C1D8000605B90622C1F00000000A7E
-:102CF0000422C218000605BF0622C2300000000AE6
-:102D00000422C258000605C50622C2700000000A4F
-:102D10000422C298000605CB0622C2B00000000AB9
-:102D20000422C2D8000605D10622C2F00000000A23
-:102D30000422C318000605D70622C3300000000A8B
-:102D40000422C358000605DD0622C3700000000AF5
-:102D50000422C398000605E30622C3B00000000A5F
-:102D60000422C3D8000605E90622C3F00000000AC9
-:102D70000422C418000605EF0622C4300000000A31
-:102D80000422C458000605F50622C4700000000A9B
-:102D90000422C498000605FB0622C4B00000000A05
-:102DA0000422C4D8000606010622C4F00000000A6E
-:102DB0000422C518000606070622C5300000000AD6
-:102DC0000422C5580006060D0622C5700000000A40
-:102DD0000422C598000606130622C5B00000000AAA
-:102DE0000422C5D8000606190622C5F00000000A14
-:102DF0000422C6180006061F0622C6300000000A7C
-:102E00000422C658000606250622C6700000000AE5
-:102E10000422C6980006062B0622C6B00000000A4F
-:102E20000422C6D8000606310622C6F00000000AB9
-:102E30000422C718000606370622C7300000000A21
-:102E40000422C7580006063D0622C7700000000A8B
-:102E50000422C798000606430622C7B00000000AF5
-:102E60000422C7D8000606490622C7F00000000A5F
-:102E70000422C8180006064F0622C8300000000AC7
-:102E80000422C858000606550622C8700000000A31
-:102E90000422C8980006065B0622C8B00000000A9B
-:102EA0000422C8D8000606610622C8F00000000A05
-:102EB0000422C918000606670622C9300000000A6D
-:102EC0000422C9580006066D0622C9700000000AD7
-:102ED0000422C998000606730622C9B00000000A41
-:102EE0000422C9D8000606790622C9F00000000AAB
-:102EF0000422CA180006067F0622CA300000000A13
-:102F00000422CA58000606850622CA700000000A7C
-:102F10000422CA980006068B0622CAB00000000AE6
-:102F20000422CAD8000606910622CAF00000000A50
-:102F30000422CB18000606970622CB300000000AB8
-:102F40000422CB580006069D0622CB700000000A22
-:102F50000422CB98000606A30622CBB00000000A8C
-:102F60000422CBD8000606A90622CBF00000000AF6
-:102F70000422CC18000606AF0622CC300000000A5E
-:102F80000422CC58000606B50622CC700000000AC8
-:102F90000422CC98000606BB0622CCB00000000A32
-:102FA0000422CCD8000606C10622CCF00000000A9C
-:102FB0000422CD18000606C70622CD300000000A04
-:102FC0000422CD58000606CD0622CD700000000A6E
-:102FD0000422CD98000606D30622CDB00000000AD8
-:102FE0000422CDD8000606D90622CDF00000000A42
-:102FF0000422CE18000606DF0622CE300000000AAA
-:103000000422CE58000606E50622CE700000000A13
-:103010000422CE98000606EB0622CEB00000000A7D
-:103020000422CED8000606F10622CEF00000000AE7
-:103030000422CF18000606F70622CF300000000A4F
-:103040000422CF58000606FD0622CF700000000AB9
-:103050000422CF98000607030622CFB00000000A22
-:103060000422CFD8000607090622CFF00000000A8C
-:103070000422D0180006070F0622D0300000000AF4
-:103080000422D058000607150622D0700000000A5E
-:103090000422D0980006071B0622D0B00000000AC8
-:1030A0000422D0D8000607210622D0F00000000A32
-:1030B0000422D118000607270622D1300000000A9A
-:1030C0000422D1580006072D0622D1700000000A04
-:1030D0000422D198000607330622D1B00000000A6E
-:1030E0000422D1D8000607390622D1F00000000AD8
-:1030F0000422D2180006073F0622D2300000000A40
-:103100000422D258000607450622D2700000000AA9
-:103110000422D2980006074B0622D2B00000000A13
-:103120000422D2D8000607510622D2F00000000A7D
-:103130000422D318000607570622D3300000000AE5
-:103140000422D3580006075D0622D3700000000A4F
-:103150000422D398000607630622D3B00000000AB9
-:103160000422D3D8000607690622D3F00000000A23
-:103170000422D4180006076F0622D4300000000A8B
-:103180000422D458000607750622D4700000000AF5
-:103190000422D4980006077B0622D4B00000000A5F
-:1031A0000422D4D8000607810622D4F00000000AC9
-:1031B0000422D518000607870622D5300000000A31
-:1031C0000422D5580006078D0622D5700000000A9B
-:1031D0000422D598000607930622D5B00000000A05
-:1031E0000422D5D8000607990622D5F00000000A6F
-:1031F0000422D6180006079F0622D6300000000AD7
-:103200000422D658000607A50622D6700000000A40
-:103210000422D698000607AB0622D6B00000000AAA
-:103220000422D6D8000607B10622D6F00000000A14
-:103230000422D718000607B70622D7300000000A7C
-:103240000422D758000607BD0622D7700000000AE6
-:103250000422D798000607C30622D7B00000000A50
-:103260000422D7D8000607C90622D7F00000000ABA
-:103270000422D818000607CF0622D8300000000A22
-:103280000422D858000607D50622D8700000000A8C
-:103290000422D898000607DB0622D8B00000000AF6
-:1032A0000422D8D8000607E10622D8F00000000A60
-:1032B0000422D918000607E70622D9300000000AC8
-:1032C0000422D958000607ED0622D9700000000A32
-:1032D0000422D998000607F30622D9B00000000A9C
-:1032E0000422D9D8000607F90622D9F00000000A06
-:1032F0000422DA18000607FF0622DA300000000A6E
-:103300000422DA58000608050622DA700000000AD6
-:103310000422DA980006080B0622DAB00000000A40
-:103320000422DAD8000608110622DAF00000000AAA
-:103330000422DB18000608170622DB300000000A12
-:103340000422DB580006081D0622DB700000000A7C
-:103350000422DB98000608230622DBB00000000AE6
-:103360000422DBD8000608290622DBF00000000A50
-:103370000422DC180006082F0622DC300000000AB8
-:103380000422DC58000608350622DC700000000A22
-:103390000422DC980006083B0622DCB00000000A8C
-:1033A0000422DCD8000608410622DCF00000000AF6
-:1033B0000422DD18000608470622DD300000000A5E
-:1033C0000422DD580006084D0622DD700000000AC8
-:1033D0000422DD98000608530622DDB00000000A32
-:1033E0000422DDD8000608590622DDF00000000A9C
-:1033F0000422DE180006085F0622DE300000000A04
-:103400000422DE58000608650622DE700000000A6D
-:103410000422DE980006086B0622DEB00000000AD7
-:103420000422DED8000608710622DEF00000000A41
-:103430000422DF18000608770622DF300000000AA9
-:103440000422DF580006087D0622DF700000000A13
-:103450000422DF98000608830622DFB00000000A7D
-:103460000422DFD8000608890622DFF00000000AE7
-:103470000422E0180006088F0622E0300000000A4F
-:103480000422E058000608950622E0700000000AB9
-:103490000422E0980006089B0622E0B00000000A23
-:1034A0000422E0D8000608A10622E0F00000000A8D
-:1034B0000422E118000608A70622E1300000000AF5
-:1034C0000422E158000608AD0622E1700000000A5F
-:1034D0000422E198000608B30622E1B00000000AC9
-:1034E0000422E1D8000608B90622E1F00000000439
-:1034F0000622153800000002062211E80000000232
-:103500000622F3000000000802221148000000001B
-:1035100006225900000000060622330000000002C7
-:1035200006226040000000300622F3200000000860
-:103530000222114C0000000006225918000000066B
-:10354000062233080000000206226100000000305D
-:103550000622F34000000008022211500000000083
-:103560000622593000000006062233100000000237
-:10357000062261C0000000300622F360000000084F
-:1035800002221154000000000622594800000006E3
-:10359000062233180000000206226280000000307C
-:1035A0000622F380000000080222115800000000EB
-:1035B00006225960000000060622332000000002A7
-:1035C00006226340000000300622F3A0000000083D
-:1035D0000222115C0000000006225978000000065B
-:1035E000062233280000000206226400000000309A
-:1035F0000622F3C000000008022211600000000053
-:103600000622599000000006062233300000000216
-:10361000062264C0000000300622F3E0000000082B
-:103620000222116400000000062259A800000006D2
-:1036300006223338000000020622658000000030B8
-:103640000216100000000028021700080000000207
-:103650000217002C000000030217003C00000004C9
-:10366000021700440000000002170048000000029A
-:103670000217004C0000009002170050000000905C
-:103680000217005400800090021700580810000034
-:10369000021700700000000602170078000009FF02
-:1036A0000217007C0000076C021701C4081000001C
-:1036B0000217034400000001021704000000008A02
-:1036C00002170404000000800217040800000081B3
-:1036D0000217040C00000080021704100000008A8A
-:1036E0000217041400000080021704180000008173
-:1036F0000217041C00000080021704300000008A3A
-:103700000217043400000080021704380000008112
-:103710000217043C00000080021704400000008AE9
-:1037200002170444000000800217044800000081D2
-:103730000217044C00000080021704800000008A79
-:103740000217048400000080021704880000008132
-:103750000217048C0000008002170038007C10045F
-:10376000021700040000000F021701EC0000000225
-:10377000021701F400000002021701EC0000000231
-:10378000021701F400000002021701EC0000000221
-:10379000021701F400000002021701EC0000000211
-:1037A000021701F400000002021701EC0000000201
-:1037B000021701F400000002021701EC00000002F1
-:1037C000021701F400000002021701EC00000002E1
-:1037D000021701F400000002021701EC00000002D1
-:1037E000021701F400000002061640240000000247
-:1037F000021640700000001C021642080000000182
-:1038000002164210000000010216422000000001D2
-:10381000021642280000000102164230000000019A
-:103820000216423800000001021642600000000249
-:103830000C16401C0003D0900A16401C0000009C8F
-:103840000B16401C000002710216403000000028D8
-:10385000021640340000002C0216403800000030F0
-:103860000216404400000020021640000000000143
-:10387000021640D8000000010216400800000001B6
-:103880000216400C0000000102164010000000016A
-:1038900002164240000000000216424800000000EC
-:1038A000061642700000000202164250000000009E
-:1038B0000216425800000000061642800000000276
-:1038C00002166008000012140216600C00001200BC
-:1038D00002166010000012040216601C0000FFFFB8
-:1038E000021660200000FFFF021660240000FFFFA8
-:1038F000021660280000FFFF02166038000000205A
-:103900000216603C00000010061660400000000235
-:1039100002166048000000230216604C00000024DC
-:1039200002166050000000250216605400000026B8
-:1039300002166058000000270216605C00000011AB
-:103940000216606000000000021660640000002B98
-:10395000021660680000002C0216606C0000002D4A
-:1039600002166070000000EC021660740000000097
-:1039700002166078000000290216607C0000002A10
-:10398000021660800000002F061660840000000D03
-:10399000021660B800000001061660BC00000008B6
-:1039A000021660DC00000001061660E00000000462
-:1039B000021660F000000001061660F4000000032B
-:1039C0000216610000000001061661040000002DCF
-:1039D000021661B800000001061661BC0000000874
-:1039E000021661DC00000001061661E00000000420
-:1039F000021661F000000001061661F400000003E9
-:103A00000216620000000001061662040000000DAC
-:103A10000216623807FFFFFF0216623C0000007FBB
-:103A20000216624007FFFFFF021662440000003FDB
-:103A300001166248000000000116624C0000000000
-:103A400001166250000000000116625400000000E0
-:103A500001166258000000000116625C00000000C0
-:103A600001166260000000000116626400000000A0
-:103A700001166268000000000116626C0000000080
-:103A80000116627000000000011662740000000060
-:103A900001166278000000000116627C0000000040
-:103AA000011662D400000000021662D80000FFFF79
-:103AB000021662DC0000FFFF021662E00000FFFF5A
-:103AC000021662E40000FFFF0C166000000003E82D
-:103AD0000A166000000000010B16600000000003E1
-:103AE0000216804000000006021680440000000517
-:103AF000021680480000000A0216804C00000005F3
-:103B00000216805400000002021680CC000000045F
-:103B1000021680D000000004021680D400000004C9
-:103B2000021680D800000004021680DC00000004A9
-:103B3000021680E000000004021680E40000000489
-:103B4000021680E800000004021688040000000647
-:103B5000021680300000007C021680340000003D18
-:103B6000021680380000003F0216803C0000009CD6
-:103B70000216E6E8000060000216E6EC00006000B5
-:103B80000216E6F0000060000216E6F40000600095
-:103B900002168234000025E40216823800008000FC
-:103BA00002168094000025E3021681F400000C0840
-:103BB000021681F800000040021681FC000001009E
-:103BC0000216820000000020021682040000001786
-:103BD00002168208000000800216820C000002001B
-:103BE00002168210000000000216823C0000001342
-:103BF00002168220008F008F0216821C008F008F19
-:103C0000021680F0000000070216821801FF01FF73
-:103C10000216821401FF01FF061680F40000000264
-:103C20000216811C0000000502168120000000051C
-:103C300002168124000000050216812800000008F9
-:103C40000216812C000000060216813000000007D9
-:103C50000616813400000004021680FC00000000FB
-:103C600006168144000000020216814C0000000488
-:103C7000021681500000000102168154000000026B
-:103C800002168158000000050216815C0000000544
-:103C90000216816000000005021681640000000524
-:103CA0000216816800000008021681000000000072
-:103CB0000216816C000000060216817000000007E9
-:103CC00006168174000000060216818C00000004B4
-:103CD000021681900000000102168104000000001D
-:103CE000021681940000000202168198000000056F
-:103CF0000216819C00000005021681A0000000054C
-:103D0000021681A400000005021681A80000000828
-:103D1000021681AC00000006021681B00000000708
-:103D2000061681B40000000202168108000000009F
-:103D3000061681BC00000004021681CC00000004BD
-:103D4000021681D000000001021681D4000000029A
-:103D5000021681D800000005021681DC0000000573
-:103D6000021681E0000000050216810C000000042C
-:103D7000021681E400000005021681E80000000838
-:103D8000021681EC00000006021681F00000000718
-:103D900002168110000000010216811400000002CA
-:103DA00002168118000000050216809C0000004CDD
-:103DB000021680A00000004C061680C4000000021D
-:103DC000021680A400000000021680A80000000077
-:103DD000021680AC0000004C061680B00000000502
-:103DE0000216E6F80000020402168240003F003F7F
-:103DF00002168244003F003F061682900000000435
-:103E000002168248008000800216824C00800080EA
-:103E100002168250010001000216825401000100C6
-:103E20000616825800000002021682600040004020
-:103E30000216826400400040021682681E001E00C6
-:103E40000216826C1E001E000216827040004000A6
-:103E500002168274400040000216827880008000C2
-:103E60000216827C800080000216828020002000E2
-:103E700002168284200020000616828800000002BC
-:103E8000021680900000004B021680600000014086
-:103E900002168064000001400616808800000002BF
-:103EA00002168068000000000216806C000000000E
-:103EB00002168070000000C0061680740000000525
-:103EC0000216880C0101010102168810010120046C
-:103ED000021688142008100102168818010101201A
-:103EE0000216881C0101010102168820010120042C
-:103EF00002168824200810010216882801010120DA
-:103F00000216882C200810010216883001010120B9
-:103F100002168834010101010216883801012004CB
-:103F20000216883C20081001021688400101012079
-:103F3000021688440101010102168848010120048B
-:103F40000216E6BC000000000216E6C000000002F7
-:103F50000216E6C4000000040216E6C800000006CF
-:103F60000216E79400000001021680EC000000FF3A
-:103F700002140000000000010215C024000000002F
-:103F80000215C0EC000000010215C0F000000001A5
-:103F90000615C10000000002021400040000000128
-:103FA00002140008000000010214000C00000001CF
-:103FB000021400300000000102140034000000016F
-:103FC0000214004000000001021400440000FFFF42
-:103FD00006140004000000030214000000000000AA
-:103FE000060280000000200002020058000000329B
-:103FF000020200A003150020020200A40315002005
-:10400000020200A801000030020200AC081000000B
-:10401000020200B000000036020200B400000030CE
-:10402000020200B800000031020200BC00000002E1
-:10403000020200C000000005020200C400000002ED
-:10404000020200C800000002020200D000000007C7
-:10405000020200DC00000000020200E00000000597
-:10406000020200E400000003020200F00000000170
-:10407000020200FC00000006020201200000000015
-:104080000202013400000002020201B0000000013F
-:104090000202020C000000010202021400000001F2
-:1040A00002020218000000020202040400000001E3
-:1040B0000202040C00000040020204100000004054
-:1040C0000202041C00000004020204200000002080
-:1040D0000202042400000002020204280000002062
-:1040E000060205000000001204020480002008BF40
-:1040F000020200600000000F0202006400000007DE
-:1041000002020068000000000202006C0000000EC5
-:10411000020200700000000E06020074000000039E
-:10412000020200F40000000402020004000000018A
-:1041300002020008000000010202000C0000000161
-:104140000202001000000001020200140000000141
-:1041500002020018000000010202001C0000000121
-:104160000202002000000001020200240000000101
-:1041700002020028000000010202002C00000001E1
-:1041800002020030000000010202003400000001C1
-:1041900002020038000000010202003C00000001A1
-:1041A0000202004000000001020200440000000181
-:1041B00002020048000000010202004C0000000161
-:1041C000020200500000000102020108000000C8C5
-:1041D0000202011800000002020201C400000000F7
-:1041E000020201CC00000000020201D40000000223
-:1041F000020201DC00000002020201E4000000FFF4
-:10420000020201EC000000FF0202010000000000B9
-:104210000202010C000000C80202011C00000002A2
-:10422000020201C800000000020201D000000000EC
-:10423000020201D800000002020201E000000002B8
-:10424000020201E8000000FF020201F0000000FF8E
-:10425000020201040000002002020108000000C860
-:104260000202011800000002020201C40000000066
-:10427000020201CC00000000020201D40000000292
-:10428000020201DC00000002020201E4000000FF63
-:10429000020201EC000000FF020201000000001019
-:1042A0000202010C000000C80202011C0000000212
-:1042B000020201C800000000020201D0000000005C
-:1042C000020201D800000002020201E00000000228
-:1042D000020201E8000000FF020201F0000000FFFE
-:1042E000020201040000003002020108000000C8C0
-:1042F0000202011800000002020201C400000000D6
-:10430000020201CC00000000020201D40000000201
-:10431000020201DC00000002020201E4000000FFD2
-:10432000020201EC000000FF020201000000004058
-:104330000202010C000000C80202011C0000000281
-:10434000020201C800000000020201D000000000CB
-:10435000020201D800000002020201E00000000297
-:10436000020201E8000000FF020201F0000000FF6D
-:10437000020201040000006002020108000000C8FF
-:104380000202011800000002020201C40000000045
-:10439000020201CC00000000020201D40000000271
-:1043A000020201DC00000002020201E4000000FF42
-:1043B000020201EC000000FF0202010000000050B8
-:1043C0000202010C000000C80202011C00000002F1
-:1043D000020201C800000000020201D0000000003B
-:1043E000020201D800000002020201E00000000207
-:1043F000020201E8000000FF020201F0000000FFDD
-:1044000002020104000000700728040000B500004B
-:10441000082807B8000908DF072C000028E9000079
-:10442000072C800036700A3B072D000035BE17D8D8
-:10443000072D80003B1B2548072E000035D8340F80
-:10444000072E80001B224186082EBFD0280608E1D7
-:10445000022800BC0000003001280000000000001D
-:1044600001280004000000000128000800000000EE
-:104470000128000C000000000128001000000000CE
-:1044800001280014000000000228002000000001A4
-:104490000228002400000002022800280000000377
-:1044A0000228002C00000000022800300000000458
-:1044B000022800340000000102280038000000003B
-:1044C0000228003C00000001022800400000000417
-:1044D00002280044000000000228004800000001FB
-:1044E0000228004C000000030228005000000000D9
-:1044F00002280054000000010228005800000004B7
-:104500000228005C0000000002280060000000019A
-:104510000228006400000003022800680000000078
-:104520000228006C00000001022800700000000456
-:104530000228007400000000022800780000000437
-:104540000228007C00000003062800800000000212
-:10455000022800A400007FFF022800A8000003FF3B
-:10456000022802240000000002280234000000009B
-:104570000228024C00000000022802E40000FFFFB5
-:104580000628200000000800022B8BC0000000015C
-:10459000022B800000000000022B80400000001869
-:1045A000022B80800000000C022B80C000000066FF
-:1045B0000C2B8300000864700A2B83000000015755
-:1045C0000B2B83000000055F0A2B834000000000D6
-:1045D0000C2B8340000002260B2B834000000001BF
-:1045E000022B838000086470022B83C00000022627
-:1045F000022B1480000000010A2B14800000000030
-:10460000022B944000000001062B94480000000299
-:10461000062A9A7000000004042A9A80000408E325
-:10462000062A9A9000000002042A9A98000208E7DD
-:10463000062A900000000048062A2008000000C852
-:10464000062A200000000002062A912800000086A9
-:10465000062AC00000000120062A9348000000033B
-:10466000042A9354000108E9062A9FB000000002C2
-:10467000042A9418000208EA042A9CD0000108ECDD
-:10468000062A9CD400000011042A9D20008F08ED0A
-:10469000062A9F5C00000005042A30000002097C05
-:1046A000062A300800000100062A404000000010E1
-:1046B000042A40000010097E042A84080002098EA2
-:1046C000042ACF4000040990042ACF600002099414
-:1046D000062A9FA000000004062A60000000054092
-:1046E000062A9D1800000002062AB00000000050B3
-:1046F000062ABB7000000070062ABB68000000029A
-:10470000062AB94800000004062AD000000008006C
-:10471000062AC48000000150062A942000000032BE
-:10472000062A502000000002062A50300000000235
-:10473000062A500000000002062A50100000000265
-:10474000022A520800000001042A9AA000020996D9
-:10475000062A95B000000022042A96380001099824
-:10476000062A963C00000003062A96E0000000227C
-:10477000042A976800010999062A976C0000000333
-:10478000062A981000000022042A98980001099A2D
-:10479000062A989C00000003062A99400000002287
-:1047A000042A99C80001099B062A99CC000000033D
-:1047B000062ABB5800000002062AC9C000000150AA
-:1047C000062A94E800000032062A50280000000261
-:1047D000062A503800000002062A50080000000295
-:1047E000062A501800000002022A520C00000001A4
-:1047F000042A9AA80002099C062A96480000002272
-:10480000042A96D00001099E062A96D400000003CF
-:10481000062A977800000022042A98000001099FC8
-:10482000062A980400000003062A98A80000002227
-:10483000042A9930000109A0062A993400000003D7
-:10484000062A99D800000022042A9A60000109A1D2
-:10485000062A9A6400000003062ABB6000000002DA
-:10486000022ACF0000000000042A9AB0001009A21A
-:10487000062A50480000000E022ACF040000000063
-:10488000042A9AF0001009B2062A50800000000E97
-:10489000022ACF0800000000042A9B30001009C241
-:1048A000062A50B80000000E022ACF0C00000000BB
-:1048B000042A9B70001009D2062A50F00000000E56
-:1048C000022ACF1000000000042A9BB0001009E269
-:1048D000062A51280000000E022ACF140000000012
-:1048E000042A9BF0001009F2062A51600000000E15
-:1048F000022ACF1800000000042A9C3000100A028F
-:10490000062A51980000000E022ACF1C0000000069
-:10491000042A9C7000100A12062A51D00000000ED2
-:1049200002101008000000010210105000000001E9
-:10493000021010000003D000021010040000003D1F
-:104940000910180002000A220910110000100C22A0
-:1049500006101140000000080910116000100C3210
-:10496000061011A00000001806102400000000E04E
-:104970000210201C00000000021020200000000196
-:10498000021020C0000000020210200400000001FC
-:104990000210200800000001021030D800000001C1
-:1049A00009103C0000050C420910380000050C47B6
-:1049B0000910392000050C4C09103B0000050C5172
-:1049C000021040D400000030021040D80000003037
-:1049D00006104C00000001000210402800000010EA
-:1049E0000210404400003FFF021040580028000021
-:1049F000021040840084924A0210405800000000D7
-:104A0000021041380000000102104138000000018E
-:104A1000021041380000000102104138000000017E
-:104A2000021041380000000102104138000000016E
-:104A3000021041380000000102104138000000015E
-:104A40000212049001F680400212051400003C108E
-:104A500002120494FFFFFFFF02120498FFFFFFFF02
-:104A60000212049CFFFFFFFF021204A0FFFFFFFFE2
-:104A7000021204A4FFFFFFFF021204A8FFFFFFFFC2
-:104A8000021204ACFFFFFFFF021204B0FFFFFFFFA2
-:104A9000021204B8FFFFFFFF021204BCFFFFFFFF7A
-:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
-:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
-:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
-:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
-:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
-:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
-:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
-:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
-:104B200002120504FFFFFFFF02120508FFFFFFFF4F
-:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
-:104B4000021204D4F800C000021204B4F0005000B5
-:104B500002120390000000080212039C00000008EB
-:104B6000021203A000000008021203A400000002C9
-:104B7000021203BC00000004021203C00000000582
-:104B8000021203C400000004021203D0000000005F
-:104B90000212036C00000001021201BC0000004080
-:104BA000021201C000001808021201C4000008032C
-:104BB000021201C800000803021201CC00000040EC
-:104BC000021201D000000003021201D40000080309
-:104BD000021201D800000803021201DC00000803E1
-:104BE000021201E000010003021201E400000803C8
-:104BF000021201E800000803021201EC00000003A9
-:104C0000021201F000000003021201F40000000390
-:104C1000021201F800000003021201FC0000000370
-:104C2000021202000000000302120204000000034E
-:104C300002120208000000030212020C000000032E
-:104C4000021202100000000302120214000000030E
-:104C500002120218000000030212021C00000003EE
-:104C600002120220000000030212022400000003CE
-:104C700002120228000024030212022C0000002F5E
-:104C80000212023000000009021202340000001972
-:104C900002120238000001840212023C000001836B
-:104CA0000212024000000306021202440000001932
-:104CB00002120248000000060212024C0000030625
-:104CC0000212025000000306021202540000030602
-:104CD0000212025800000C860212025C0000030659
-:104CE00002120260000003060212026400000006C5
-:104CF00002120268000000060212026C00000006A8
-:104D00000212027000000006021202740000000687
-:104D100002120278000000060212027C0000000667
-:104D20000212028000000006021202840000000647
-:104D300002120288000000060212028C0000000627
-:104D40000212029000000006021202940000000607
-:104D500002120298000000060212029C00000006E7
-:104D6000021202A000000306021202A400000013B7
-:104D7000021202A800000006021202B00000100495
-:104D8000021202B400001004021203240010644056
-:104D90000212032800106440021205B40000000152
-:104DA000021205F800000040021205FC0000001984
-:104DB00002120600000000010212066C0000000151
-:104DC000021201B000000001021207D80000000327
-:104DD000021207D800000003021207D800000003E7
-:104DE000021207D800000003021207D800000003D7
-:104DF000021207D800000003021207D800000003C7
-:104E0000021207D8000000030600A0000000000CFA
-:104E10000200A050000000000200A05400000000AA
-:104E20000200A0EC555400000200A0F05555555565
-:104E30000200A0F4000055550200A0F8F0000000A8
-:104E40000200A0FC555400000200A1005555555524
-:104E50000200A104000055550200A108F000000066
-:104E60000200A19C000000000200A1A000010000BF
-:104E70000200A1A4000050140200A1A8000000003C
-:104E80000200A6A8000000000200A6AC000000007E
-:104E90000200A6D0000000000200A45C00000C008C
-:104EA0000200A61C000000030200A070FFF55FFFD7
-:104EB0000200A0740000FFFF0200A078F00003E0F1
-:104EC0000200A07C000000000200A0800000A00002
-:104ED0000600A084000000050200A0980FE000007A
-:104EE0000600A09C000000070200A0B8000004001B
-:104EF0000600A0BC000000030200A0C800001000D3
-:104F00000600A0CC000000030200A0D80000400072
-:104F10000600A0DC000000030200A0E80001000081
-:104F20000600A22C000000040200A688000000FC7D
-:104F30000600A68C000000070200A6F40000000096
-:104F40000200A10CFF5C00000200A110FFF55FFF52
-:104F50000200A1140000FFFF0200A118F00003E00E
-:104F60000200A11C000000000200A1200000A0001F
-:104F70000600A124000000050200A1380FE0000097
-:104F80000600A13C000000070200A1580000080034
-:104F90000600A15C000000030200A16800002000E0
-:104FA0000600A16C000000030200A1780000800050
-:104FB0000600A17C000000030200A188000200009E
-:104FC0000600A23C000000040200A6B0000000FCA5
-:104FD0000600A6B4000000070200A6F800000000CA
-:104FE0000200A030000000000200A0340000000019
-:104FF0000200A038000000000200A03C00000000F9
-:105000000200A040000000000200A04400000000D8
-:105010000200A048000000000200A04C00000000B8
-:10502000020090C40000E000020090CC0000F300F9
-:10503000020090D400000003020091A000000001D3
-:105040000600917000000003020090EC0000600078
-:10505000020090F400007300020090FC00000003C6
-:10506000020091A8000000010600918800000003E2
-:10507000020091000000400002009108000053006F
-:105080000200911000000004020091AC0000000139
-:1050900006009194000000020200919C00000001B3
-:1050A000020090D800006000020090E00000730051
-:1050B000020090E800000003020091A4000000013B
-:1050C0000200917C000000010200918000000001BC
-:1050D00002009184000000000200912800000300FB
-:1050E0000200916C0003F0080200912C0000030004
-:1050F0000200913000000300020091340000030020
-:1051000002009138000003000200913C00000300FF
-:1051100002009140000003000200942C00000001F6
-:1051200002009430000000010200943400000001ED
-:105130000200942C000000010200943000000001E5
-:1051400002009434000000010200942C00000001D1
-:1051500002009430000000010200943400000001BD
-:105160000200942C000000010200943000000001B5
-:1051700002009434000000010200942C00000001A1
-:10518000020094300000000102009434000000018D
-:105190000200942C00000001020094300000000185
-:1051A00002009434000000010200942C0000000171
-:1051B000020094300000000102009434000000015D
-:1051C0000200942C00000001020094300000000155
-:1051D0000200943400000001021300780000003047
-:1051E0000213003C000061A8061301080000000340
-:1051F000021301040000000002130134000000004B
-:10520000061301080000000302130104000000005F
-:10521000021301340000000006130108000000031F
-:10522000021301040000000002130134000000001A
-:10523000061301080000000302130104000000002F
-:1052400002130134000000000613010800000003EF
-:1052500002130104000000000213013400000000EA
-:1052600006130108000000030213010400000000FF
-:1052700002130134000000000613010800000003BF
-:1052800002130104000000000213013400000000BA
-:1052900006130108000000030213010400000000CF
-:1052A0000213013400000000021100B800000001E8
-:1052B0000216E6E8000020000216E6EC00002000DE
-:1052C0000216E6F0000065550216E6F4000065558A
-:1052D00002168150000000000216817400000001D7
-:1052E00002168178000000010216817C0000000196
-:1052F0000216818000000001021681840000000176
-:105300000216818800000001021681B4000000012D
-:10531000021681B800000001021681BC00000001E5
-:10532000021681C000000001021681C400000001C5
-:10533000021681C800000001021681100000000062
-:105340000216824000BF00BF061682440000000221
-:105350000216824C00BF00BF0216E6C40000000126
-:105360000216E6C8000000030216E79400000000E1
-:10537000042ACF40000A0C56000000000000000084
-:1053800000000034000000000000000000000000E9
-:10539000000000000000000000000000000000000D
-:1053A0000000000000000000000000000034003594
-:1053B00000000000000000000000000000000000ED
-:1053C00000000000000000000000000000000000DD
-:1053D0000000000000000000003500600000000038
-:1053E00000000000000000000000000000000000BD
-:1053F00000000000000000000000000000000000AD
-:1054000000000000006000910000000000000000AB
-:1054100000910095009500990099009D009D00A1C4
-:1054200000A100A500A500A900A900AD00AD00B134
-:1054300000B100B500000000000000000000000006
-:10544000000000000000000000000000000000005C
-:1054500000000000000000000000000000B5031183
-:105460000311031B031B03250325032C032C033308
-:105470000333033A033A0341034103480348034F0C
-:10548000034F03560356035D0000000000000000B8
-:10549000000000000000000000000000000000000C
-:1054A00000000000000000000000000000000000FC
-:1054B00000000000000000000000000000000000EC
-:1054C00000000000000000000000000000000000DC
-:1054D00000000000000000000000000000000000CC
-:1054E00000000000000000000000000000000000BC
-:1054F00000000000000000000000000000000000AC
-:10550000000000000000000000000000000000009B
-:10551000000000000000000000000000000000008B
-:10552000000000000000000000000000000000007B
-:105530000000000000000000035D035E00000000AA
-:1055400000000000035E035F035F0360036003610C
-:10555000036103620362036303630364036403651B
-:10556000036503660000000000000000000000006A
-:10557000000000000000000000000000000000002B
-:10558000000000000000000000000000000000001B
-:105590000366036D036D0379037903850000000042
-:1055A00000000000000000000000000000000000FB
-:1055B00000000000000000000000000000000000EB
-:1055C00000000000000000000000000000000000DB
-:1055D00000000000000000000000000000000000CB
-:1055E00000000000000000000385038600000000AA
-:1055F00000000000000000000000000000000000AB
-:10560000000000000000000000000000000000009A
-:1056100000000000038603B100000000000000004D
-:10562000000000000000000000000000000000007A
-:10563000000000000000000000000000000000006A
-:1056400003B103E0000000000000000000000000C3
-:10565000000000000000000000000000000000004A
-:1056600000000000000000000000000003E0040F44
-:105670000000000000000000040F04160416041DC2
-:10568000041D04240424042B042B043204320439A2
-:1056900004390440044004470447047A0000000031
-:1056A00000000000047A047E047E048204820486E2
-:1056B0000486048A048A048E048E0492049204965A
-:1056C0000496049A049A04EA04EA05000500051603
-:1056D000051605180518051A051A051C051C051ED2
-:1056E000051E052005200522052205240524052682
-:1056F00005260693000000000000000006930698AF
-:105700000698069D069D06A206A206A706A706AC59
-:1057100006AC06B106B106B606B606BB06BB06BCAD
-:105720000000000000000000000000000000000079
-:105730000000000000000000000000000000000069
-:10574000000000000000000006BC06E000000000B1
-:105750000000000006E006E206E206E406E406E6D3
-:1057600006E606E806E806EA06EA06EC06EC06EEB9
-:1057700006EE06F006F00705070507080708070B01
-:105780000000000000000000000000000000000019
-:105790000000000000000000000000000000000009
-:1057A000070B074F00000000000000000000000091
-:1057B00000000000000000000000000000000000E9
-:1057C000000000000000000000000000074F07E19B
-:1057D00000000000000000000000000000000000C9
-:1057E00000000000000000000000000000000000B9
-:1057F000000000000000000007E107EF00000000CB
-:105800000000000000000000000000000000000098
-:105810000000000000000000000000000000000088
-:105820000000000007EF082C00000000000000004E
-:10583000082C08350835083E083E08470847085038
-:1058400008500859085908620862086B086B087408
-:10585000087408D508D508EA08EA08FF08FF090215
-:1058600009020905090509080908090B090B090EB0
-:10587000090E09110911091409140917091709203A
-:105880000000000000000000000000000000000018
-:105890000000000000000000000000000000000008
-:1058A00000000000000000000920092600000000A0
-:1058B00000000000000000000000000000000000E8
-:1058C00000000000000000000000000000000000D8
-:1058D000000000000926092B000000000000000065
-:1058E00000000000000000000000000000000000B8
-:1058F00000000000000000000000000000000000A8
-:10590000092B0933000000000000000009330934AE
-:10591000093409350935093609360937093709388F
-:10592000093809390939093A093A093B00000000E8
-:105930000000000000000000000000000000000067
-:105940000000000000000000000000000000000057
-:105950000000000000000000093B09AC000000004E
-:105960000000000009AC09AD09AD09AE09AE09AFF0
-:1059700009AF09B009B009B109B109B209B209B357
-:1059800009B309B409B409C809C809DB09DB09EF7F
-:1059900009EF09F009F009F109F109F209F209F337
-:1059A00009F309F409F409F509F509F609F609F707
-:1059B00009F70A1600000000000000000A160A1984
-:1059C0000A190A1C0A1C0A1F0A1F0A220A220A258F
-:1059D0000A250A280A280A2B0A2B0A2E0A2E0A3020
-:1059E00000000000000000000A300A330A330A36C3
-:1059F0000A360A390A390A3C0A3C0A3F0A3F0A4277
-:105A00000A420A450A450A480A480A4900000000B5
-:105A10000000000000000000000000000000000086
-:105A20000000000000000000000000000000000076
-:105A3000000000000A490A610000000000000000A8
-:105A40000000000000000000000000000000000056
-:105A50000000000000000000000000000000000046
-:105A60000A610A620000000000000000000000005F
-:105A70000000000000000000000000000000000026
-:105A80000000000000000000000000000000000016
-:105A9000000100000002070000030E0000041500D2
-:105AA00000051C000006230000072A000008310042
-:105AB00000093800000A3F00000B4600000C4D00B2
-:105AC000000D5400000E5B00000F62000010690022
-:105AD000001170000012770000137E000014850092
-:105AE00000158C000016930000179A000018A10002
-:105AF0000019A800001AAF00001BB600001CBD0072
-:105B0000001DC400001ECB00001FD2000000D90001
-:105B10000000200000004000000060000000800045
-:105B20000000A0000000C0000000E0000001000034
-:105B30000001200000014000000160000001800021
-:105B40000001A0000001C0000001E0000002000010
-:105B500000022000000240000002600000028000FD
-:105B60000002A0000002C0000002E00000030000EC
-:105B700000032000000340000003600000038000D9
-:105B80000003A0000003C0000003E00000040000C8
-:105B900000042000000440000004600000048000B5
-:105BA0000004A0000004C0000004E00000050000A4
-:105BB0000005200000054000000560000005800091
-:105BC0000005A0000005C0000005E0000006000080
-:105BD000000620000006400000066000000680006D
-:105BE0000006A0000006C0000006E000000700005C
-:105BF0000007200000074000000760000007800049
-:105C00000007A0000007C0000007E0000008000037
-:105C10000008200000084000000860000008800024
-:105C20000008A0000008C0000008E0000009000013
-:105C30000009200000094000000960000009800000
-:105C40000009A0000009C0000009E000000A0000EF
-:105C5000000A2000000A4000000A6000000A8000DC
-:105C6000000AA000000AC000000AE000000B0000CB
-:105C7000000B2000000B4000000B6000000B8000B8
-:105C8000000BA000000BC000000BE000000C0000A7
-:105C9000000C2000000C4000000C6000000C800094
-:105CA000000CA000000CC000000CE000000D000083
-:105CB000000D2000000D4000000D6000000D800070
-:105CC000000DA000000DC000000DE000000E00005F
-:105CD000000E2000000E4000000E6000000E80004C
-:105CE000000EA000000EC000000EE000000F00003B
-:105CF000000F2000000F4000000F6000000F800028
-:105D0000000FA000000FC000000FE0000010000016
-:105D10000010200000104000001060000010800003
-:105D20000010A0000010C0000010E00000110000F2
-:105D300000112000001140000011600000118000DF
-:105D40000011A0000011C0000011E00000120000CE
-:105D500000122000001240000012600000128000BB
-:105D60000012A0000012C0000012E00000130000AA
-:105D70000013200000134000001360000013800097
-:105D80000013A0000013C0000013E0000014000086
-:105D90000014200000144000001460000014800073
-:105DA0000014A0000014C0000014E0000015000062
-:105DB000001520000015400000156000001580004F
-:105DC0000015A0000015C0000015E000001600003E
-:105DD000001620000016400000166000001680002B
-:105DE0000016A0000016C0000016E000001700001A
-:105DF0000017200000174000001760000017800007
-:105E00000017A0000017C0000017E00000180000F5
-:105E100000182000001840000018600000188000E2
-:105E20000018A0000018C0000018E00000190000D1
-:105E300000192000001940000019600000198000BE
-:105E40000019A0000019C0000019E000001A0000AD
-:105E5000001A2000001A4000001A6000001A80009A
-:105E6000001AA000001AC000001AE000001B000089
-:105E7000001B2000001B4000001B6000001B800076
-:105E8000001BA000001BC000001BE000001C000065
-:105E9000001C2000001C4000001C6000001C800052
-:105EA000001CA000001CC000001CE000001D000041
-:105EB000001D2000001D4000001D6000001D80002E
-:105EC000001DA000001DC000001DE000001E00001D
-:105ED000001E2000001E4000001E6000001E80000A
-:105EE000001EA000001EC000001EE000001F0000F9
-:105EF000001F2000001F4000001F6000001F8000E6
-:105F0000001FA000001FC000001FE00000200000D4
-:105F100000202000002040000020600000208000C1
-:105F20000020A0000020C0000020E00000210000B0
-:105F3000002120000021400000216000002180009D
-:105F40000021A0000021C0000021E000002200008C
-:105F50000022200000224000002260000022800079
-:105F60000022A0000022C0000022E0000023000068
-:105F70000023200000234000002360000023800055
-:105F80000023A0000023C0000023E0000024000044
-:105F90000024200000244000002460000024800031
-:105FA0000024A0000024C0000024E0000025000020
-:105FB000002520000025400000256000002580000D
-:105FC0000025A0000025C0000025E00000260000FC
-:105FD00000262000002640000026600000268000E9
-:105FE0000026A0000026C0000026E00000270000D8
-:105FF00000272000002740000027600000278000C5
-:106000000027A0000027C0000027E00000280000B3
-:1060100000282000002840000028600000288000A0
-:106020000028A0000028C0000028E000002900008F
-:10603000002920000029400000296000002980007C
-:106040000029A0000029C0000029E000002A00006B
-:10605000002A2000002A4000002A6000002A800058
-:10606000002AA000002AC000002AE000002B000047
-:10607000002B2000002B4000002B6000002B800034
-:10608000002BA000002BC000002BE000002C000023
-:10609000002C2000002C4000002C6000002C800010
-:1060A000002CA000002CC000002CE000002D0000FF
-:1060B000002D2000002D4000002D6000002D8000EC
-:1060C000002DA000002DC000002DE000002E0000DB
-:1060D000002E2000002E4000002E6000002E8000C8
-:1060E000002EA000002EC000002EE000002F0000B7
-:1060F000002F2000002F4000002F6000002F8000A4
-:10610000002FA000002FC000002FE0000030000092
-:10611000003020000030400000306000003080007F
-:106120000030A0000030C0000030E000003100006E
-:10613000003120000031400000316000003180005B
-:106140000031A0000031C0000031E000003200004A
-:106150000032200000324000003260000032800037
-:106160000032A0000032C0000032E0000033000026
-:106170000033200000334000003360000033800013
-:106180000033A0000033C0000033E0000034000002
-:1061900000342000003440000034600000348000EF
-:1061A0000034A0000034C0000034E00000350000DE
-:1061B00000352000003540000035600000358000CB
-:1061C0000035A0000035C0000035E00000360000BA
-:1061D00000362000003640000036600000368000A7
-:1061E0000036A0000036C0000036E0000037000096
-:1061F0000037200000374000003760000037800083
-:106200000037A0000037C0000037E0000038000071
-:10621000003820000038400000386000003880005E
-:106220000038A0000038C0000038E000003900004D
-:10623000003920000039400000396000003980003A
-:106240000039A0000039C0000039E000003A000029
-:10625000003A2000003A4000003A6000003A800016
-:10626000003AA000003AC000003AE000003B000005
-:10627000003B2000003B4000003B6000003B8000F2
-:10628000003BA000003BC000003BE000003C0000E1
-:10629000003C2000003C4000003C6000003C8000CE
-:1062A000003CA000003CC000003CE000003D0000BD
-:1062B000003D2000003D4000003D6000003D8000AA
-:1062C000003DA000003DC000003DE000003E000099
-:1062D000003E2000003E4000003E6000003E800086
-:1062E000003EA000003EC000003EE000003F000075
-:1062F000003F2000003F4000003F6000003F800062
-:10630000003FA000003FC000003FE000003FE00170
-:1063100000000000000001FF0000020000007FF804
-:1063200000007FF800000A90000035000000000126
-:106330000000FF00000000000000FF00000000005F
-:106340000000FF00000000000000FF00000000004F
-:106350000000FF00000000000000FF00000000003F
-:106360000000FF00000000000000FF00000000002F
-:106370000000FF00000000000000FF00000000001F
-:106380000000FF00000000000000FF00000000000F
-:106390000000FF00000000000000FF0000000000FF
-:1063A0000000FF00000000000000FF0000000000EF
-:1063B0000000FF00000000000000FF0000000000DF
-:1063C0000000FF00000000000000FF0000000000CF
-:1063D0000000FF00000000000000FF0000000000BF
-:1063E0000000FF00000000000000FF0000000000AF
-:1063F0000000FF00000000000000FF00000000009F
-:106400000000FF00000000000000FF00000000008E
-:106410000000FF00000000000000FF00000000007E
-:106420000000FF00000000000000FF00000000006E
-:106430000000FF00000000000000FF00000000005E
-:106440000000FF00000000000000FF00000000004E
-:106450000000FF00000000000000FF00000000003E
-:106460000000FF00000000000000FF00000000002E
-:106470000000FF00000000000000FF00000000001E
-:106480000000FF00000000000000FF00000000000E
-:106490000000FF00000000000000FF0000000000FE
-:1064A0000000FF00000000000000FF0000000000EE
-:1064B0000000FF00000000000000FF0000000000DE
-:1064C0000000FF00000000000000FF0000000000CE
-:1064D0000000FF00000000000000FF0000000000BE
-:1064E0000000FF00000000000000FF0000000000AE
-:1064F0000000FF00000000000000FF00000000009E
-:106500000000FF00000000000000FF00000000008D
-:106510000000FF00000000000000FF00000000007D
-:106520000000FF00000000000000FF00000000006D
-:106530000000FF00000000000000FF00000000005D
-:106540000000FF00000000000000FF00000000004D
-:106550000000FF00000000000000FF00000000003D
-:106560000000FF00000000000000FF00000000002D
-:1065700000000000140AFF000000000100000000FD
-:106580000020100100000000010090000000010048
-:1065900000009002000090040000900600009008A7
-:1065A0000000900A0000900C0000900E0000901077
-:1065B0000000901200009014000090160000901847
-:1065C0000000901A0000901C0000901E0000902017
-:1065D00000009022000090240000902600009028E7
-:1065E0000000902A0000902C0000902E00009030B7
-:1065F0000000903200009034000090360000903887
-:106600000000903A0000903C0000903E0000904056
-:106610000000904200009044000090460000904826
-:106620000000904A0000904C0000904E00009050F6
-:1066300000009052000090540000905600009058C6
-:106640000000905A0000905C0000905E0000906096
-:106650000000906200009064000090660000906866
-:106660000000906A0000906C0000906E0000907036
-:106670000000907200009074000090760000907806
-:106680000000907A0000907C0000907E00009080D6
-:1066900000009082000090840000908600009088A6
-:1066A0000000908A0000908C0000908E0000909076
-:1066B0000000909200009094000090960000909846
-:1066C0000000909A0000909C0000909E000090A016
-:1066D000000090A2000090A4000090A6000090A8E6
-:1066E000000090AA000090AC000090AE000090B0B6
-:1066F000000090B2000090B4000090B6000090B886
-:10670000000090BA000090BC000090BE000090C055
-:10671000000090C2000090C4000090C6000090C825
-:10672000000090CA000090CC000090CE000090D0F5
-:10673000000090D2000090D4000090D6000090D8C5
-:10674000000090DA000090DC000090DE000090E095
-:10675000000090E2000090E4000090E6000090E865
-:10676000000090EA000090EC000090EE000090F035
-:10677000000090F2000090F4000090F6000090F805
-:10678000000090FA000090FC000090FE00009100D4
-:1067900000009102000091040000910600009108A1
-:1067A0000000910A0000910C0000910E0000911071
-:1067B0000000911200009114000091160000911841
-:1067C0000000911A0000911C0000911E0000912011
-:1067D00000009122000091240000912600009128E1
-:1067E0000000912A0000912C0000912E00009130B1
-:1067F0000000913200009134000091360000913881
-:106800000000913A0000913C0000913E0000914050
-:106810000000914200009144000091460000914820
-:106820000000914A0000914C0000914E00009150F0
-:1068300000009152000091540000915600009158C0
-:106840000000915A0000915C0000915E0000916090
-:106850000000916200009164000091660000916860
-:106860000000916A0000916C0000916E0000917030
-:106870000000917200009174000091760000917800
-:106880000000917A0000917C0000917E00009180D0
-:1068900000009182000091840000918600009188A0
-:1068A0000000918A0000918C0000918E0000919070
-:1068B0000000919200009194000091960000919840
-:1068C0000000919A0000919C0000919E000091A010
-:1068D000000091A2000091A4000091A6000091A8E0
-:1068E000000091AA000091AC000091AE000091B0B0
-:1068F000000091B2000091B4000091B6000091B880
-:10690000000091BA000091BC000091BE000091C04F
-:10691000000091C2000091C4000091C6000091C81F
-:10692000000091CA000091CC000091CE000091D0EF
-:10693000000091D2000091D4000091D6000091D8BF
-:10694000000091DA000091DC000091DE000091E08F
-:10695000000091E2000091E4000091E6000091E85F
-:10696000000091EA000091EC000091EE000091F02F
-:10697000000091F2000091F4000091F6000091F8FF
-:10698000000091FA000091FC000091FEFFFFFFFF64
-:10699000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
-:1069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
-:1069B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
-:1069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
-:1069D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
-:1069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
-:1069F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
-:106A0000FFFFFFFFFFFFFFFFFFFFFFFF000000038F
-:106A100000BEBC20000000000000000500000003D4
-:106A200000BEBC20000000000000000500000003C4
-:106A300000BEBC20000000000000000500000003B4
-:106A400000BEBC20000000000000000500000003A4
-:106A500000BEBC2000000000000000050000000394
-:106A600000BEBC2000000000000000050000000384
-:106A700000BEBC2000000000000000050000000374
-:106A800000BEBC2000000000000000050000200047
-:106A9000000040C000006180000082400000A300B0
-:106AA0000000C3C00000E480000105400001260092
-:106AB000000146C000016780000188400001A90074
-:106AC0000001C9C00001EA8000020B4000022C0056
-:106AD00000024CC000026D8000028E400002AF0038
-:106AE0000002CFC00002F0800000114000008000D2
-:106AF000000103800001870000020A8000028E006E
-:106B000000031180000395000004188000049C001D
-:106B100000051F800005A300000626800006AA00CD
-:106B200000072D800007B100000834800008B8007D
-:106B300000093B800009BF00000A4280000AC6002D
-:106B4000000B4980000BCD00000C5080000CD400DD
-:106B5000000D578000005B0000007FF800007FF808
-:106B60000000022A000035000000FF0000000000C5
-:106B70000000FF00000000000000FF000000000017
-:106B80000000FF00000000000000FF000000000007
-:106B90000000FF00000000000000FF0000000000F7
-:106BA0000000FF00000000000000FF0000000000E7
-:106BB0000000FF00000000000000FF0000000000D7
-:106BC0000000FF00000000000000FF0000000000C7
-:106BD0000000FF00000000000000FF0000000000B7
-:106BE0000000FF00000000000000FF0000000000A7
-:106BF0000000FF00000000000000FF000000000097
-:106C00000000FF00000000000000FF000000000086
-:106C10000000FF00000000000000FF000000000076
-:106C20000000FF00000000000000FF000000000066
-:106C30000000FF00000000000000FF000000000056
-:106C40000000FF00000000000000FF000000000046
-:106C50000000FF00000000000000FF000000000036
-:106C60000000FF00000000000000FF000000000026
-:106C70000000FF00000000000000FF000000000016
-:106C80000000FF00000000000000FF000000000006
-:106C90000000FF00000000000000FF0000000000F6
-:106CA0000000FF00000000000000FF0000000000E6
-:106CB0000000FF00000000000000FF0000000000D6
-:106CC0000000FF00000000000000FF0000000000C6
-:106CD0000000FF00000000000000FF0000000000B6
-:106CE0000000FF00000000000000FF0000000000A6
-:106CF0000000FF00000000000000FF000000000096
-:106D00000000FF00000000000000FF000000000085
-:106D10000000FF00000000000000FF000000000075
-:106D20000000FF00000000000000FF000000000065
-:106D30000000FF00000000000000FF000000000055
-:106D40000000FF00000000000000FF000000000045
-:106D50000000FF00000000000000FF000000000035
-:106D60000000FF00000000000000FF000000000025
-:106D70000000FF00000000000000FF000000000015
-:106D80000000FF00000000000000FF000000000005
-:106D90000000FF00000000000000FF0000000000F5
-:106DA0000000FF00000019000000000000000000CB
-:106DB000FFFFFFFF000000000393870000000000BA
-:106DC0000393870000007FF800007FF800000BA30A
-:106DD00000001500000000FF000000FF000000FFA1
-:106DE000000000FF000000FF000000FF000000FFA7
-:106DF000000000FF0000FF00000000000000FF0096
-:106E0000000000000000FF00000000000000FF0084
-:106E1000000000000000FF00000000000000FF0074
-:106E2000000000000000FF00000000000000FF0064
-:106E3000000000000000FF00000000000000FF0054
-:106E4000000000000000FF00000000000000FF0044
-:106E5000000000000000FF00000000000000FF0034
-:106E6000000000000000FF00000000000000FF0024
-:106E7000000000000000FF00000000000000FF0014
-:106E8000000000000000FF00000000000000FF0004
-:106E9000000000000000FF00000000000000FF00F4
-:106EA000000000000000FF00000000000000FF00E4
-:106EB000000000000000FF00000000000000FF00D4
-:106EC000000000000000FF00000000000000FF00C4
-:106ED000000000000000FF00000000000000FF00B4
-:106EE000000000000000FF00000000000000FF00A4
-:106EF000000000000000FF00000000000000FF0094
-:106F0000000000000000FF00000000000000FF0083
-:106F1000000000000000FF00000000000000FF0073
-:106F2000000000000000FF00000000000000FF0063
-:106F3000000000000000FF00000000000000FF0053
-:106F4000000000000000FF00000000000000FF0043
-:106F5000000000000000FF00000000000000FF0033
-:106F6000000000000000FF00000000000000FF0023
-:106F7000000000000000FF00000000000000FF0013
-:106F8000000000000000FF00000000000000FF0003
-:106F9000000000000000FF00000000000000FF00F3
-:106FA000000000000000FF00000000000000FF00E3
-:106FB000000000000000FF00000000000000FF00D3
-:106FC000000000000000FF00000000000000FF00C3
-:106FD000000000000000FF00000000000000FF00B3
-:106FE000000000000000FF00000000000000FF00A3
-:106FF000000000000000FF00000000000000FF0093
-:10700000000000000000FF00000000000000FF0082
-:10701000000000000000FF00000000000000FF0072
-:10702000000000000000FF00000000000000FF0062
-:1070300000000000FFFFFFFFFFFFFFFFFFFFFFFF5C
-:10704000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
-:10705000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
-:10706000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
-:10707000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
-:10708000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
-:10709000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
-:1070A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
-:1070B000FFFFFFFF00000000000028AD00002918BE
-:1070C0000000291900000005000000070000FF0073
-:1070D0000FFFFFFF0000FF000FFFFFFF000000FF9A
-:1070E0000000FF000000FF000FFFFFFF0000FF0097
-:1070F0000FFFFFFF000000FF0000FF000000FF0087
-:107100000FFFFFFF0000FF000FFFFFFF000000FF69
-:107110000000FF000000FF000FFFFFFF0000FF0066
-:107120000FFFFFFF000000FF0000FF000000FF0056
-:107130000FFFFFFF0000FF000FFFFFFF000000FF39
-:107140000000FF000000FF000FFFFFFF0000FF0036
-:107150000FFFFFFF000000FF0000FF000000FF0026
-:107160000FFFFFFF0000FF000FFFFFFF000000FF09
-:107170000000FF000000FF000FFFFFFF0000FF0006
-:107180000FFFFFFF000000FF0000FF000000FF00F6
-:107190000FFFFFFF0000FF000FFFFFFF000000FFD9
-:1071A0000000FF000000FF000FFFFFFF0000FF00D6
-:1071B0000FFFFFFF000000FF0000FF000000FF00C6
-:1071C0000FFFFFFF0000FF000FFFFFFF000000FFA9
-:1071D0000000FF000000FF000FFFFFFF0000FF00A6
-:1071E0000FFFFFFF000000FF0000FF000000FF0096
-:1071F0000FFFFFFF0000FF000FFFFFFF000000FF79
-:107200000000FF000000FF000FFFFFFF0000FF0075
-:107210000FFFFFFF000000FF0000FF000000FF0065
-:107220000FFFFFFF0000FF000FFFFFFF000000FF48
-:107230000000FF000000FF000FFFFFFF0000FF0045
-:107240000FFFFFFF000000FF0000FF000000FF0035
-:107250000FFFFFFF0000FF000FFFFFFF000000FF18
-:107260000000FF000000FF000FFFFFFF0000FF0015
-:107270000FFFFFFF000000FF0000FF000000FF0005
-:107280000FFFFFFF0000FF000FFFFFFF000000FFE8
-:107290000000FF000000FF000FFFFFFF0000FF00E5
-:1072A0000FFFFFFF000000FF0000FF000000FF00D5
-:1072B0000FFFFFFF0000FF000FFFFFFF000000FFB8
-:1072C0000000FF000000FF000FFFFFFF0000FF00B5
-:1072D0000FFFFFFF000000FF0000FF000000FF00A5
-:1072E0000FFFFFFF0000FF000FFFFFFF000000FF88
-:1072F0000000FF000000FF000FFFFFFF0000FF0085
-:107300000FFFFFFF000000FF0000FF000000FF0074
-:107310000FFFFFFF0000FF000FFFFFFF000000FF57
-:107320000000FF000000FF000FFFFFFF0000FF0054
-:107330000FFFFFFF000000FF0000FF000000FF0044
-:107340000FFFFFFF0000FF000FFFFFFF000000FF27
-:107350000000FF000000FF000FFFFFFF0000FF0024
-:107360000FFFFFFF000000FF0000FF000000FF0014
-:107370000FFFFFFF0000FF000FFFFFFF000000FFF7
-:107380000000FF000000FF000FFFFFFF0000FF00F4
-:107390000FFFFFFF000000FF0000FF000000FF00E4
-:1073A0000FFFFFFF0000FF000FFFFFFF000000FFC7
-:1073B0000000FF000000FF000FFFFFFF0000FF00C4
-:1073C0000FFFFFFF000000FF0000FF000000FF00B4
-:1073D0000FFFFFFF0000FF000FFFFFFF000000FF97
-:1073E0000000FF000000FF000FFFFFFF0000FF0094
-:1073F0000FFFFFFF000000FF0000FF000000FF0084
-:107400000FFFFFFF0000FF000FFFFFFF000000FF66
-:107410000000FF000000FF000FFFFFFF0000FF0063
-:107420000FFFFFFF000000FF0000FF000000FF0053
-:107430000FFFFFFF0000FF000FFFFFFF000000FF36
-:107440000000FF000000FF000FFFFFFF0000FF0033
-:107450000FFFFFFF000000FF0000FF000000FF0023
-:107460000FFFFFFF0000FF000FFFFFFF000000FF06
-:107470000000FF000000FF000FFFFFFF0000FF0003
-:107480000FFFFFFF000000FF0000FF000000FF00F3
-:107490000FFFFFFF0000FF000FFFFFFF000000FFD6
-:1074A0000000FF000000FF000FFFFFFF0000FF00D3
-:1074B0000FFFFFFF000000FF0000FF000000FF00C3
-:1074C0000FFFFFFF0000FF000FFFFFFF000000FFA6
-:1074D0000000FF000000FF000FFFFFFF0000FF00A3
-:1074E0000FFFFFFF000000FF0000FF000000FF0093
-:1074F0000FFFFFFF0000FF000FFFFFFF000000FF76
-:107500000000FF000000FF000FFFFFFF0000FF0072
-:107510000FFFFFFF000000FF0000FF000000FF0062
-:107520000FFFFFFF0000FF000FFFFFFF000000FF45
-:107530000000FF000000FF000FFFFFFF0000FF0042
-:107540000FFFFFFF000000FF0000FF000000FF0032
-:107550000FFFFFFF0000FF000FFFFFFF000000FF15
-:107560000000FF000000FF000FFFFFFF0000FF0012
-:107570000FFFFFFF000000FF0000FF000000FF0002
-:107580000FFFFFFF0000FF000FFFFFFF000000FFE5
-:107590000000FF000000FF000FFFFFFF0000FF00E2
-:1075A0000FFFFFFF000000FF0000FF000000FF00D2
-:1075B0000FFFFFFF0000FF000FFFFFFF000000FFB5
-:1075C0000000FF000000FF000FFFFFFF0000FF00B2
-:1075D0000FFFFFFF000000FF0000FF000000FF00A2
-:1075E0000FFFFFFF0000FF000FFFFFFF000000FF85
-:1075F0000000FF000000FF000FFFFFFF0000FF0082
-:107600000FFFFFFF000000FF0000FF000000FF0071
-:107610000FFFFFFF0000FF000FFFFFFF000000FF54
-:107620000000FF000000FF000FFFFFFF0000FF0051
-:107630000FFFFFFF000000FF0000FF000000FF0041
-:107640000FFFFFFF0000FF000FFFFFFF000000FF24
-:107650000000FF000000FF000FFFFFFF0000FF0021
-:107660000FFFFFFF000000FF0000FF000000FF0011
-:107670000FFFFFFF0000FF000FFFFFFF000000FFF4
-:107680000000FF000000FF000FFFFFFF0000FF00F1
-:107690000FFFFFFF000000FF0000FF000000FF00E1
-:1076A0000FFFFFFF0000FF000FFFFFFF000000FFC4
-:1076B0000000FF000000FF000FFFFFFF0000FF00C1
-:1076C0000FFFFFFF000000FF0000FF000000FF00B1
-:1076D0000FFFFFFF0000FF000FFFFFFF000000FF94
-:1076E0000000FF000000FF000FFFFFFF0000FF0091
-:1076F0000FFFFFFF000000FF0000FF000000FF0081
-:107700000FFFFFFF0000FF000FFFFFFF000000FF63
-:107710000000FF000000FF000FFFFFFF0000FF0060
-:107720000FFFFFFF000000FF0000FF000000FF0050
-:107730000FFFFFFF0000FF000FFFFFFF000000FF33
-:107740000000FF000000FF000FFFFFFF0000FF0030
-:107750000FFFFFFF000000FF0000FF000000FF0020
-:107760000FFFFFFF0000FF000FFFFFFF000000FF03
-:107770000000FF000000FF000FFFFFFF0000FF0000
-:107780000FFFFFFF000000FF0000FF000000FF00F0
-:107790000FFFFFFF0000FF000FFFFFFF000000FFD3
-:1077A0000000FF000000FF000FFFFFFF0000FF00D0
-:1077B0000FFFFFFF000000FF0000FF000000FF00C0
-:1077C0000FFFFFFF0000FF000FFFFFFF000000FFA3
-:1077D0000000FF000000FF000FFFFFFF0000FF00A0
-:1077E0000FFFFFFF000000FF0000FF000000FF0090
-:1077F0000FFFFFFF0000FF000FFFFFFF000000FF73
-:107800000000FF000000FF000FFFFFFF0000FF006F
-:107810000FFFFFFF000000FF0000FF000000FF005F
-:107820000FFFFFFF0000FF000FFFFFFF000000FF42
-:107830000000FF000000FF000FFFFFFF0000FF003F
-:107840000FFFFFFF000000FF0000FF000000FF002F
-:107850000FFFFFFF0000FF000FFFFFFF000000FF12
-:107860000000FF000000FF000FFFFFFF0000FF000F
-:107870000FFFFFFF000000FF0000FF000000FF00FF
-:107880000FFFFFFF0000FF000FFFFFFF000000FFE2
-:107890000000FF000000FF000FFFFFFF0000FF00DF
-:1078A0000FFFFFFF000000FF0000FF000000FF00CF
-:1078B0000FFFFFFF0000FF000FFFFFFF000000FFB2
-:1078C0000000FF000000FF000FFFFFFF0000FF00AF
-:1078D0000FFFFFFF000000FF0000FF000000FF009F
-:1078E0000FFFFFFF0000FF000FFFFFFF000000FF82
-:1078F0000000FF000000FF000FFFFFFF0000FF007F
-:107900000FFFFFFF000000FF0000FF000000FF006E
-:107910000FFFFFFF0000FF000FFFFFFF000000FF51
-:107920000000FF000000FF000FFFFFFF0000FF004E
-:107930000FFFFFFF000000FF0000FF000000FF003E
-:107940000FFFFFFF0000FF000FFFFFFF000000FF21
-:107950000000FF000000FF000FFFFFFF0000FF001E
-:107960000FFFFFFF000000FF0000FF000000FF000E
-:107970000FFFFFFF0000FF000FFFFFFF000000FFF1
-:107980000000FF000000FF000FFFFFFF0000FF00EE
-:107990000FFFFFFF000000FF0000FF000000FF00DE
-:1079A0000FFFFFFF0000FF000FFFFFFF000000FFC1
-:1079B0000000FF000000FF000FFFFFFF0000FF00BE
-:1079C0000FFFFFFF000000FF0000FF000000FF00AE
-:1079D0000FFFFFFF0000FF000FFFFFFF000000FF91
-:1079E0000000FF000000FF000FFFFFFF0000FF008E
-:1079F0000FFFFFFF000000FF0000FF000000FF007E
-:107A00000FFFFFFF0000FF000FFFFFFF000000FF60
-:107A10000000FF000000FF000FFFFFFF0000FF005D
-:107A20000FFFFFFF000000FF0000FF000000FF004D
-:107A30000FFFFFFF0000FF000FFFFFFF000000FF30
-:107A40000000FF000000FF000FFFFFFF0000FF002D
-:107A50000FFFFFFF000000FF0000FF000000FF001D
-:107A60000FFFFFFF0000FF000FFFFFFF000000FF00
-:107A70000000FF000000FF000FFFFFFF0000FF00FD
-:107A80000FFFFFFF000000FF0000FF000000FF00ED
-:107A90000FFFFFFF0000FF000FFFFFFF000000FFD0
-:107AA0000000FF000000FF000FFFFFFF0000FF00CD
-:107AB0000FFFFFFF000000FF0000FF000000FF00BD
-:107AC0000FFFFFFF0000FF000FFFFFFF000000FFA0
-:107AD0000000FF000000FF000FFFFFFF0000FF009D
-:107AE0000FFFFFFF000000FF0000FF000000FF008D
-:107AF0000FFFFFFF0000FF000FFFFFFF000000FF70
-:107B00000000FF000000FF000FFFFFFF0000FF006C
-:107B10000FFFFFFF000000FF0000FF000000FF005C
-:107B20000FFFFFFF0000FF000FFFFFFF000000FF3F
-:107B30000000FF000000FF000FFFFFFF0000FF003C
-:107B40000FFFFFFF000000FF0000FF000000FF002C
-:107B50000FFFFFFF0000FF000FFFFFFF000000FF0F
-:107B60000000FF000000FF000FFFFFFF0000FF000C
-:107B70000FFFFFFF000000FF0000FF000000FF00FC
-:107B80000FFFFFFF0000FF000FFFFFFF000000FFDF
-:107B90000000FF000000FF000FFFFFFF0000FF00DC
-:107BA0000FFFFFFF000000FF0000FF000000FF00CC
-:107BB0000FFFFFFF0000FF000FFFFFFF000000FFAF
-:107BC0000000FF000000FF000FFFFFFF0000FF00AC
-:107BD0000FFFFFFF000000FF0000FF000000FF009C
-:107BE0000FFFFFFF0000FF000FFFFFFF000000FF7F
-:107BF0000000FF000000FF000FFFFFFF0000FF007C
-:107C00000FFFFFFF000000FF0000FF000000FF006B
-:107C10000FFFFFFF0000FF000FFFFFFF000000FF4E
-:107C20000000FF000000FF000FFFFFFF0000FF004B
-:107C30000FFFFFFF000000FF0000FF000000FF003B
-:107C40000FFFFFFF0000FF000FFFFFFF000000FF1E
-:107C50000000FF000000FF000FFFFFFF0000FF001B
-:107C60000FFFFFFF000000FF0000FF000000FF000B
-:107C70000FFFFFFF0000FF000FFFFFFF000000FFEE
-:107C80000000FF000000FF000FFFFFFF0000FF00EB
-:107C90000FFFFFFF000000FF0000FF000000FF00DB
-:107CA0000FFFFFFF0000FF000FFFFFFF000000FFBE
-:107CB0000000FF000000FF000FFFFFFF0000FF00BB
-:107CC0000FFFFFFF000000FF0000FF000000FF00AB
-:107CD0000FFFFFFF0000FF000FFFFFFF000000FF8E
-:107CE0000000FF000000FF000FFFFFFF0000FF008B
-:107CF0000FFFFFFF000000FF0000FF000000FF007B
-:107D00000FFFFFFF0000FF000FFFFFFF000000FF5D
-:107D10000000FF000000FF000FFFFFFF0000FF005A
-:107D20000FFFFFFF000000FF0000FF000000FF004A
-:107D30000FFFFFFF0000FF000FFFFFFF000000FF2D
-:107D40000000FF000000FF000FFFFFFF0000FF002A
-:107D50000FFFFFFF000000FF0000FF000000FF001A
-:107D60000FFFFFFF0000FF000FFFFFFF000000FFFD
-:107D70000000FF000000FF000FFFFFFF0000FF00FA
-:107D80000FFFFFFF000000FF0000FF0000001000D9
-:107D900000002080000031000000418000005200FF
-:107DA00000006280000073000000838000009400E7
-:107DB0000000A4800000B5000000C5800000D600CF
-:107DC0000000E6800000F7000001078000011800B5
-:107DD00000012880000139000001498000015A009B
-:107DE00000016A8000017B0000018B8000019C0083
-:107DF0000001AC800001BD000001CD800001DE006B
-:107E00000001EE800001FF0000000F8000007FF8FD
-:107E100000007FF8000005F60000350010000000AB
-:107E2000000028AD000029180000291900000005F5
-:107E3000000000060001000100050206CCCCCCC900
-:107E40007058103C0000FF00000000000000FF0020
-:107E5000000000000000FF00000000000000FF0024
-:107E6000000000000000FF00000000000000FF0014
-:107E7000000000000000FF00000000000000FF0004
-:107E8000000000000000FF00000000000000FF00F4
-:107E9000000000000000FF00000000000000FF00E4
-:107EA000000000000000FF00000000000000FF00D4
-:107EB000000000000000FF00000000000000FF00C4
-:107EC000000000000000FF00000000000000FF00B4
-:107ED000000000000000FF00000000000000FF00A4
-:107EE000000000000000FF00000000000000FF0094
-:107EF000000000000000FF00000000000000FF0084
-:107F0000000000000000FF00000000000000FF0073
-:107F1000000000000000FF00000000000000FF0063
-:107F2000000000000000FF00000000000000FF0053
-:107F3000000000000000FF00000000000000FF0043
-:107F4000000000000000FF00000000000000FF0033
-:107F5000000000000000FF00000000000000FF0023
-:107F6000000000000000FF00000000000000FF0013
-:107F7000000000000000FF00000000000000FF0003
-:107F8000000000000000FF00000000000000FF00F3
-:107F9000000000000000FF00000000000000FF00E3
-:107FA000000000000000FF00000000000000FF00D3
-:107FB000000000000000FF00000000000000FF00C3
-:107FC000000000000000FF00000000000000FF00B3
-:107FD000000000000000FF00000000000000FF00A3
-:107FE000000000000000FF00000000000000FF0093
-:107FF000000000000000FF00000000000000FF0083
-:10800000000000000000FF00000000000000FF0072
-:10801000000000000000FF00000000000000FF0062
-:10802000000000000000FF00000000000000FF0052
-:10803000000000000000FF00000000000000FF0042
-:10804000000000000000FF00000000000000FF0032
-:10805000000000000000FF00000000000000FF0022
-:10806000000000000000FF00000000000000FF0012
-:10807000000000000000FF00000000000000FF0002
-:108080000000000000000001CCCC0201CCCCCCCC24
-:10809000CCCC0201CCCCCCCCCCCC0201CCCCCCCC4A
-:1080A000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3A
-:1080B000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2A
-:1080C000CCCC0201CCCCCCCC00000000FFFFFFFFE9
-:1080D000030303031342020250505020706080508B
-:1080E0000200020006040604000E0000011600D67D
-:1080F000002625A0002625A0002625A0002625A0D4
-:1081000000720000012300F3002625A0002625A010
-:10811000002625A0002625A00000FFFF000000008B
-:108120000000FFFF000000000000FFFF0000000053
-:108130000000FFFF000000000000FFFF0000000043
-:108140000000FFFF000000000000FFFF0000000033
-:108150000000FFFF000000000000FFFF0000000023
-:108160000000FFFF000000000000FFFF0000000013
-:108170000000FFFF000000000000FFFF0000000003
-:108180000000FFFF000000000000FFFF00000000F3
-:108190000000FFFF000000000000FFFF00000000E3
-:1081A0000000FFFF000000000000FFFF00000000D3
-:1081B0000000FFFF000000000000FFFF00000000C3
-:1081C0000000FFFF000000000000FFFF00000000B3
-:1081D0000000FFFF000000000000FFFF00000000A3
-:1081E0000000FFFF000000000000FFFF0000000093
-:1081F0000000FFFF000000000000FFFF0000000083
-:108200000000FFFF000000000000FFFF0000000072
-:108210000000FFFF000000000000FFFF0000000062
-:108220000000FFFF000000000000FFFF0000000052
-:108230000000FFFF000000000000FFFF0000000042
-:108240000000FFFF000000000000FFFF0000000032
-:108250000000FFFF000000000000FFFF0000000022
-:108260000000FFFF000000000000FFFF0000000012
-:108270000000FFFF000000000000FFFF0000000002
-:108280000000FFFF000000000000FFFF00000000F2
-:108290000000FFFF000000000000FFFF00000000E2
-:1082A0000000FFFF000000000000FFFF00000000D2
-:1082B0000000FFFF000000000000FFFF00000000C2
-:1082C0000000FFFF000000000000FFFF00000000B2
-:1082D0000000FFFF000000000000FFFF00000000A2
-:1082E0000000FFFF000000000000FFFF0000000092
-:1082F0000000FFFF000000000000FFFF0000000082
-:108300000000FFFF000000000000FFFF0000000071
-:108310000000FFFF00000000FFFFFFF3318FFFFFB1
-:108320000C30C30CC30C30C3CF3CF300F3CF3CF391
-:108330000000CF3CCDCDCDCDFFFFFFF130EFFFFFF3
-:108340000C30C30CC30C30C3CF3CF300F3CF3CF371
-:108350000001CF3CCDCDCDCDFFFFFFF6305FFFFF5D
-:108360000C30C30CC30C30C3CF3CF300F3CF3CF351
-:108370000002CF3CCDCDCDCDFFFFF4061CBFFFFFEB
-:108380000C30C305C30C30C3CF300014F3CF3CF323
-:108390000004CF3CCDCDCDCDFFFFFFF2304FFFFF2E
-:1083A0000C30C30CC30C30C3CF3CF300F3CF3CF311
-:1083B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF22
-:1083C0000C30C30CC30C30C3CF3CF300F3CF3CF3F1
-:1083D0000010CF3CCDCDCDCDFFFFFFF731EFFFFF3C
-:1083E0000C30C30CC30C30C3CF3CF300F3CF3CF3D1
-:1083F0000020CF3CCDCDCDCDFFFFFFF5302FFFFFCF
-:108400000C30C30CC30C30C3CF3CF300F3CF3CF3B0
-:108410000040CF3CCDCDCDCDFFFFFFF3318FFFFF2F
-:108420000C30C30CC30C30C3CF3CF300F3CF3CF390
-:108430000000CF3CCDCDCDCDFFFFFFF1310FFFFFD1
-:108440000C30C30CC30C30C3CF3CF300F3CF3CF370
-:108450000001CF3CCDCDCDCDFFFFFFF6305FFFFF5C
-:108460000C30C30CC30C30C3CF3CF300F3CF3CF350
-:108470000002CF3CCDCDCDCDFFFFF4061CBFFFFFEA
-:108480000C30C305C30C30C3CF300014F3CF3CF322
-:108490000004CF3CCDCDCDCDFFFFFFF2304FFFFF2D
-:1084A0000C30C30CC30C30C3CF3CF300F3CF3CF310
-:1084B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF21
-:1084C0000C30C30CC30C30C3CF3CF300F3CF3CF3F0
-:1084D0000010CF3CCDCDCDCDFFFFFFF730EFFFFF3C
-:1084E0000C30C30CC30C30C3CF3CF300F3CF3CF3D0
-:1084F0000020CF3CCDCDCDCDFFFFFFF5304FFFFFAE
-:108500000C30C30CC30C30C3CF3CF300F3CF3CF3AF
-:108510000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE3
-:108520000C30C30CC30C30C3CF3CF3CCF3CF3CF3C3
-:108530000000CF3CCDCDCDCDFFFFFFFF30CFFFFF03
-:108540000C30C30CC30C30C3CF3CF3CCF3CF3CF3A3
-:108550000001CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
-:108560000C30C30CC30C30C3CF3CF3CCF3CF3CF383
-:108570000002CF3CCDCDCDCDFFFFFFFF30CFFFFFC1
-:108580000C30C30CC30C30C3CF3CF3CCF3CF3CF363
-:108590000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9F
-:1085A0000C30C30CC30C30C3CF3CF3CCF3CF3CF343
-:1085B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF7B
-:1085C0000C30C30CC30C30C3CF3CF3CCF3CF3CF323
-:1085D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:1085E0000C30C30CC30C30C3CF3CF3CCF3CF3CF303
-:1085F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF23
-:108600000C30C30CC30C30C3CF3CF3CCF3CF3CF3E2
-:108610000040CF3CCDCDCDCDFFFFFFF3320FFFFFAC
-:108620000C30C30CC30C30C3CF3CF300F3CF3CF38E
-:108630000000CF3CCDCDCDCDFFFFFFF1310FFFFFCF
-:108640000C30C30CC30C30C3CF3CF300F3CF3CF36E
-:108650000001CF3CCDCDCDCDFFFFFFF6305FFFFF5A
-:108660000C30C30CC30C30C3CF3CF300F3CF3CF34E
-:108670000002CF3CCDCDCDCDFFFFF4061CBFFFFFE8
-:108680000C30C305C30C30C3CF300014F3CF3CF320
-:108690000004CF3CCDCDCDCDFFFFFFF2304FFFFF2B
-:1086A0000C30C30CC30C30C3CF3CF300F3CF3CF30E
-:1086B0000008CF3CCDCDCDCDFFFFFF8A042FFFFFBB
-:1086C0000C30C30CC30C30C3CF3CC000F3CF3CF321
-:1086D0000010CF3CCDCDCDCDFFFFFF9705CFFFFFE5
-:1086E0000C30C30CC30C30C3CF3CC000F3CF3CF301
-:1086F0000020CF3CCDCDCDCDFFFFFFF5310FFFFFEB
-:108700000C30C30CC30C30C3CF3CF300F3CF3CF3AD
-:108710000040CF3CCDCDCDCDFFFFFFF3320FFFFFAB
-:108720000C30C30CC30C30C3CF3CF300F3CF3CF38D
-:108730000000CF3CCDCDCDCDFFFFFFF1302FFFFFAF
-:108740000C30C30CC30C30C3CF3CF300F3CF3CF36D
-:108750000001CF3CCDCDCDCDFFFFFFF6305FFFFF59
-:108760000C30C30CC30C30C3CF3CF300F3CF3CF34D
-:108770000002CF3CCDCDCDCDFFFFFF061CBFFFFFDC
-:108780000C30C30CC30C30C3CF3CC014F3CF3CF34C
-:108790000004CF3CCDCDCDCDFFFFFFF2304FFFFF2A
-:1087A0000C30C30CC30C30C3CF3CF300F3CF3CF30D
-:1087B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF1E
-:1087C0000C30C30CC30C30C3CF3CF300F3CF3CF3ED
-:1087D0000010CF3CCDCDCDCDFFFFFFF731CFFFFF58
-:1087E0000C30C30CC30C30C3CF3CF300F3CF3CF3CD
-:1087F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF21
-:108800000C30C30CC30C30C3CF3CF3CCF3CF3CF3E0
-:108810000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
-:108820000C30C30CC30C30C3CF3CF3CCF3CF3CF3C0
-:108830000000CF3CCDCDCDCDFFFFFFFF30CFFFFF00
-:108840000C30C30CC30C30C3CF3CF3CCF3CF3CF3A0
-:108850000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
-:108860000C30C30CC30C30C3CF3CF3CCF3CF3CF380
-:108870000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBE
-:108880000C30C30CC30C30C3CF3CF3CCF3CF3CF360
-:108890000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9C
-:1088A0000C30C30CC30C30C3CF3CF3CCF3CF3CF340
-:1088B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF78
-:1088C0000C30C30CC30C30C3CF3CF3CCF3CF3CF320
-:1088D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF50
-:1088E0000C30C30CC30C30C3CF3CF3CCF3CF3CF300
-:1088F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF20
-:108900000C30C30CC30C30C3CF3CF3CCF3CF3CF3DF
-:108910000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
-:108920000C30C30CC30C30C3CF3CF3CCF3CF3CF3BF
-:108930000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFF
-:108940000C30C30CC30C30C3CF3CF3CCF3CF3CF39F
-:108950000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
-:108960000C30C30CC30C30C3CF3CF3CCF3CF3CF37F
-:108970000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBD
-:108980000C30C30CC30C30C3CF3CF3CCF3CF3CF35F
-:108990000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9B
-:1089A0000C30C30CC30C30C3CF3CF3CCF3CF3CF33F
-:1089B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF77
-:1089C0000C30C30CC30C30C3CF3CF3CCF3CF3CF31F
-:1089D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
-:1089E0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FF
-:1089F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1F
-:108A00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DE
-:108A10000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
-:108A20000C30C30CC30C30C3CF3CF3CCF3CF3CF3BE
-:108A30000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFE
-:108A40000C30C30CC30C30C3CF3CF3CCF3CF3CF39E
-:108A50000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDD
-:108A60000C30C30CC30C30C3CF3CF3CCF3CF3CF37E
-:108A70000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBC
-:108A80000C30C30CC30C30C3CF3CF3CCF3CF3CF35E
-:108A90000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9A
-:108AA0000C30C30CC30C30C3CF3CF3CCF3CF3CF33E
-:108AB0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:108AC0000C30C30CC30C30C3CF3CF3CCF3CF3CF31E
-:108AD0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
-:108AE0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FE
-:108AF0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1E
-:108B00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DD
-:108B10000040CF3CCDCDCDCD000C0000000700C003
-:108B200000028130000B8158000202100001023067
-:108B3000000F024000010330000C0000000800C0DC
-:108B400000028140000B8168000202200001024007
-:108B500000070250000202C00010000000080100DF
-:108B600000028180000B81A8000202600001828067
-:108B7000000E829800080380001000000001010030
-:108B80000002811000090138000201C8000101E85B
-:108B9000000E01F8000002D8CCCCCCCCCCCCCCCC94
-:108BA000CCCCCCCCCCCCCCCC00002000CCCCCCCC15
-:108BB000CCCCCCCCCCCCCCCCCCCCCCCC0000200005
-:108BC000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCE5
-:108BD00004002000CCCCCCCCCCCCCCCCCCCCCCCCE1
-:108BE000CCCCCCCC4100200003030303034202029F
-:108BF0005050502070608050131313131342121200
-:108C000050505020706080500301020000000000AE
-:108C100000000000000000001F8B080000000000A2
-:108C2000000BFB51CFC0F0038A0F093230688A2055
-:108C3000F8C4E05C760686751C0C0C5BB849D3075B
-:108C4000C32C0C0C0CDA4CE4E905E1FBBC0C0CAFBA
-:108C50008098850F559C871342FF015AC0C7CAC030
-:108C6000A0C1865DFF3A35043B408581A11C88D9AF
-:108C7000941818CC5411E2D2EA0C0C3380FC04A8EE
-:108C8000D81D201DAB46BE9B47F1E0C1378D51F981
-:108C90005B0DA169012A7E0B4D7E1B54BE4A074223
-:108CA000DF36C66E6EB50E71F69FB546E5AFB4C63B
-:108CB000AFFEAE3D2AFF209AFAAD503E00C5D55B0F
-:108CC000A7D8030000000000000000000000000022
-:108CD0001F8B080000000000000BED7D7F7C14D589
-:108CE000B5F8999DD9D9D9CDEE6608096C20E02454
-:108CF000861AFB82DFE577A841878034B63CDF8A9D
-:108D00005AD3D6F6BB506C551456BF3EE1F56933C5
-:108D1000F941122262049FDAD61F2B554BFB6C8956
-:108D2000942AAD3FDE024AF1F5C743AAD5D7A22F58
-:108D3000FE80AA455FC4D2D87E51DE3DE7DEC9CEB3
-:108D40004C76930DD01F7FBCF081E1CEDC1FE79EF7
-:108D500073EE39E79E73EE8DEAF3C3C7CE05388E06
-:108D60003FECD913028059D9A771F5BCAEBE99006A
-:108D70004721D2D35D0AD0A68009AC6C1D88A41F00
-:108D800094007F6A14565E2D7F3CDE5D097067D1CA
-:108D9000D7EEC3FA6B2C0502ECD9DD0C9039837D3C
-:108DA0000F453743314011A4B6E277F6937890F53A
-:108DB00037109C9C866876FC32F0D1B80015FAA179
-:108DC00022AA07C765F6CF81E47C18072083FDB38C
-:108DD000067A593FCAF3721AC795E5C5FA8B55D979
-:108DE0007EBC4F595721A389FEF01FF9B2E26438C7
-:108DF0007FFD35072AB73E5D93AD7F06444A0FFDE0
-:108E00001DFB8F020AC123AF07C4C3D130A4E5CA3A
-:108E1000FCFD0C341B5B9FF6231EBF509C989ABF31
-:108E20009E8DA7AE668D9E1DCD3A6402000C64B384
-:108E3000B7963DC3606EAE1DDA6E0148842FCDB08B
-:108E4000089EF6B02F5D5489502701187EFD881FBB
-:108E500009DF2FD1CC1CEDED279432FCD8F36578D7
-:108E60000C02EF0FD8FC1E64FD0571FC1CF8BA085B
-:108E7000C72F63DFAB878E6FCD3CF1F1436702EC08
-:108E80000B23BE4D84017C7A0AE282DE9F9486E940
-:108E900047D05931783F23E1BDA8C6971D97FD0DF6
-:108EA0001A21179F0462256EBEF1F225E2A90CE992
-:108EB0006548AF4FC9F6AB22DD72E0EB4A81AFFEE9
-:108EC000F989A604C3C7DA66B05E73B4936360A67B
-:108ED00073E069B568678FA794B27A39FA076811A9
-:108EE000EBC772D52F14BE9B4E10BE9BFF42F0DD28
-:108EF00026F89D49287AF6CF4F129CDEFE72AD2FE0
-:108F0000B68807CB21256DF990BF4B21FE207BF859
-:108F100035BECEECEFDF073FF5B303250E1BA74DA3
-:108F2000C0D73F9FCBBFB5D3D4F46689E4910BCEB5
-:108F300087517EB1769224F0A1F502F25FD1070A43
-:108F4000C05884CF844404605D7583369CFC015D09
-:108F5000F9539FCD775543F9EEE36C18842B14CE6B
-:108F60008DA7EF0FCAD1CBACD7583F5A90BD3F1D4C
-:108F7000FB2D8D55CC069C1DFDF8C577907CF271BC
-:108F80005CB7C758BDD942CECAD43FC911A8009218
-:108F9000F7B2A84FE3B0FA01362D733A7BE2FB1A21
-:108FA000318E34B45F6FBB0128E1F811F0D8725DE7
-:108FB0008627A89F41789404E1CBFBDECFDEEBE16E
-:108FC000937F7FB265BF9167BC1E89F869A4F6AF35
-:108FD000087E19C29F79E8BA5FAC33057A4D383DF7
-:108FE000CB47367F9D281F9D349FB0E1495FE4E168
-:108FF000130B52B46E5835AB7BDAE8F925079F6442
-:109000009CF5174B63F83C9438F10B834721BED590
-:10901000393C65D34BA93F09D7F819D88328231EBB
-:10902000D87C97D9ED214EEB3584768EA33D9B1CE1
-:10903000C12BC99290FBBCDE0D629DCF6BA8E0F006
-:1090400083E8DF032FEB4F73F627438587CF39DCA7
-:109050001B242EDF58FD0CE1D33BBE2211BC322471
-:109060002C1F6BB7598CEF955FF673BBE86FBD048F
-:109070004DBD61BE9E9638F4618324E484C6D799C1
-:10908000573EF991AF669C385F152AD7174BB9F553
-:109090000EB38A621746F2EB9D629FAD0F323141EB
-:1090A000B751D1FD74A9C445F742E15D7682F04E17
-:1090B0001C0A6F417C76A6E41B959EBCE104E10B83
-:1090C0007AE03B557C3D43F059A1F0DBEB60B4F016
-:1090D000CB43F15BD03A9A3B4AF8369F207ECB7C5B
-:1090E000B69D24E0CBB36EE7097A5BC0F9436176A5
-:1090F00038EE730A85EFD191E103F804FB6BBD6A8A
-:10910000990AD96B0013009E6E79D5B2942C7C26F7
-:1091100070B93EDAF1F78C4C3F31FE5B96599D1DDC
-:10912000FFF996B75CE32B8C7F90D90A1DF7854237
-:10913000E70DEFB9E6FDBAF49E6BDC13C5FBC18207
-:10914000C7FFA36BDEEF4B7F74CF3BCCE67D7AE1AC
-:10915000E3FEFE04F9B152AC97064977E9817CF64B
-:10916000FB0C41D7BBEDFA36BC79EA9F29E06A2FA8
-:10917000B0FE44D1FFE70AACDF2BFAEFC5FA652356
-:10918000D73F5DD44F15585FF2F175984F7FCE975A
-:109190006CFC816BFFD1A6713F88D9A640F09CA1E1
-:1091A0007E13AB21F5ED3E467BAB35A0B79592DF44
-:1091B00084FC226B0012E837F92624EB7CAC1F6399
-:1091C000C74DF761BD238AA677EBC01724FB1E3C71
-:1091D00010D9DC5D991D6FB59C6C929097DAA2FA5C
-:1091E00083E45F493549EC59668575F4DB0C5425F9
-:1091F0005A9696E23C0CDD62FDFCFA8A8B76627927
-:109200009326E9322BFFCB39736FFB0C6B35F0E102
-:10921000CE974EC37AD3C655B592BC3425C44F6998
-:109220005C35E5287B5E7C71561FE03F8B1D6566D3
-:10923000077CB6E9122EFFC5F7CF27DDE54B1A2FC5
-:1092400071B5BF34E1FE9E9D0FF07DC7B9DCFF30E4
-:109250005095FA2F0ED7C72A2DEE5FA0F9EA565483
-:10926000EF66F35CFFE1B5545EDF52ABB7B2F2E7F5
-:10927000AEF4B72C65CFB004BACC9652715CA5F9A8
-:10928000029BAF5AC7768FE73CDB35DBC8BFFF2AAE
-:10929000363DF38C5F9C8593CDB3E9EADC70ABFA85
-:1092A000FB13DE60F6D2C0CEA089F084F7CAE9A035
-:1092B0004474DD3909E9621527397D40AA66CF2358
-:1092C0008D3AA07FA4A13169C8ACBC31A6C5030604
-:1092D000DAC9190DF11E411ACC65EFE3BE20DA633D
-:1092E000AAFE07EA5F17DF7BE255E3D13FF2E3E630
-:1092F000351315B6DE77345BF47CB4B98B9EDB9BFB
-:109300007B262ACC88DFD27C173DEDF9A12431ECF5
-:10931000F9C9B8AF365B91DF06FCCC34423CCEF7DE
-:10932000D1FE7603CA113FCAE1745B14DFD7C1B422
-:109330006E40B9C4E5CBC6F8B6DDF87E633D4C435C
-:10934000926D3437B745D93CAE2B87E9D8F7CE9725
-:109350001FE3DF2B607A8095773536905CED89FBD3
-:10936000D2814A82FF7CE4E79E461F3093078AEB56
-:10937000185C0EBC0662EEF2AE4626B066123ED215
-:1093800001293B7F852D33C4C746B32AE8DC57CF7C
-:10939000DAE76E7F66DA5DDE88ED87F14BCDED733F
-:1093A000D79FF392BBCC24DB2B837CC0F1F8AF3E7C
-:1093B000260F76BF3CDE67E1BC4D3E4FF6E4FEC2B1
-:1093C000982F8DC6E716813F1BBF03112E5F3636DF
-:1093D000733F603E78367EEAAAD8707E03B5B1232B
-:1093E00081FE54B5B1270167E1332D9EBD09A79FCA
-:1093F000D57EBE88C68FC35FD211DB58B2B4360BA0
-:109400008FB7FE785925793750C6BF77C45ED3979A
-:10941000D63AFB93BCDFB5CBC3CEEFDCAF32506E98
-:109420007F3FA22D0DE7683F897DCF4197A532FF91
-:10943000FEF4CB81863B901F057E77BFFC13AD1AEF
-:10944000F1FDBC0CC8671BF73590BC453E4379B1B4
-:109450008BF1455F2DD27FFD2BCE755B5CE72E3304
-:10946000BEE2FCC5FAC5A17E86F4601DFEBBF0CB52
-:10947000EE157ED93DCD317A3EDD6CD07357730D3C
-:109480007DCF34C7A9FC54731D959F6836A9FCE3B2
-:10949000E6462AEF684E50F9D1E6267A6E6F4ED234
-:1094A000734BF315F464FC4BFCBCA13925FCC06B79
-:1094B0005CFCF0F7F1808BFF3E5DE32E9F6F9C918B
-:1094C0005DD7ECEF2763EEF279FA275DE5059ABBED
-:1094D0003C1FBEE2EAEFDC0FBEEC2ACFEBEF70D50B
-:1094E0003FFB4D77796EDF439EF5E22ECFDAB7C7AB
-:1094F000B31EDDE5E2BA43AEFE023177F97E1432E7
-:109500005C4E117F74C45A4B72F2CFE0F78DA12FDD
-:10951000B9BECBD47E64FE59D65589FC93F6C52DD1
-:10952000943B26E7275BEE78F9C4A6DB48FC65C3CD
-:10953000F197E6ABFFE5A7E1F9A9607EA85772F2C3
-:109540008397EE5EFE18226704BFFC2F1FFC6DF0B0
-:1095500001CC64C42ECFAF5773D877649F061240F6
-:10956000F69D1FED34477B75722A69E6D09F57F947
-:10957000E66F95593F8152E8C0786840C9E3E795A6
-:10958000F93E25A0F1EFC16A93ECB26230A6CB633D
-:1095900000AE796C5EF932F6FEE7421F765C089603
-:1095A000C4FA1B37414DE23EA6B8DABDDF7B46E682
-:1095B000FB18FBB9E9879126FC0EA5334798378F36
-:1095C000D7C8136737FDC660CF0B666F59CBDE86F1
-:1095D000AA9319F2019596927D9A0C19D4AF5997D6
-:1095E000B67CA518478338DA8972D884241B67AE05
-:1095F000CFFC05CE9BD947FF21CFCADA3D9BC4F3F0
-:1096000047621D5EE4337F29EA3D3F5C3D7BDC1110
-:10961000E905494BE2FEA9F8830C447F69DC653F0C
-:10962000D9F353948499C8616FFC4EE04BD2E34D5B
-:10963000DC0FA202CA877CF50FCAB6FFC972ED071C
-:109640008BA13F23231C311E6F82631719174E1DF8
-:109650000A87AA2492380EC6AB37B371DAC77CC624
-:10966000483AC6F948E67E2A2966123CAACEE1515C
-:1096700095B899C8C14703021EBB1F3B6E26C5FAA9
-:10968000A12F9C856F6D30D184FB256B8C4A786A45
-:109690008FB8EDAF190AEFA75A3CDBFDB9ED438057
-:1096A00056BE1F1E57A761FF6D750D1ADAD78C1DA8
-:1096B00068BFD21E5E523C9CBDBD5ED8BFDD280F88
-:1096C00003180FD785BC8AD1B33DBCAD11D7C1D12A
-:1096D0005A8687CAFCFD44E2EEB86E514DC813C7E6
-:1096E0004D139C41A3C413EF9DE06AE71FA7F8EC5C
-:1096F000B8364823C3DF21E0B7EB752A294DCF895F
-:10970000273EBE5D0EC4DCF0FEF9F0C7DB17F97B27
-:10971000F55C709D2ABCE58BC3DA4F75AC9A4A7331
-:109720007F4ACCB90E3E2BF84B1DABA5483E69F9DC
-:10973000BE8778FB7082FC5B5A38614055361EABA1
-:10974000E17A70E0E95AD1EED78A4FACCB540CFDE8
-:109750005C92916A427ED22AD83A9286B6B39F49E9
-:10976000D1BEF3C3FFF712AD93328DD68964B075C5
-:1097700094631C4931AF56D8F31DD9BC46C1F8CC0F
-:10978000477232D77A5921E0D116270CAD8A427838
-:109790003CDFC303C73A85EB834336FC568AFC564D
-:1097A00085C2BFA640F8ED7118FCED02FEB5C3C13D
-:1097B000DF26E02901A3857C990697B300171ACE0E
-:1097C000BC8B37C4F825424E314C11DDECEFFF2540
-:1097D000FA29743E1B059C23CDE78D2C3DEEC579FF
-:1097E000B0F9DC87F3CA379F7B041C6F285CCF6815
-:1097F000898411AB22559F93AF9E1070F42B228E5B
-:10980000665D3B2ABEFAD702E7F144962E8F09BA6D
-:10981000EC186E1E8F8A79F4C830F70DF4339E2E43
-:10982000F40E2C71D1E5A8C04F4FC0A6CB752EBA4F
-:10983000FC4ECCABD0F93C53209F1DCDD2E5393145
-:109840009FFDC3CDC751FF4551FF25519FFCE74701
-:10985000952B5AAD5AFC9E38A0CCCA8EC7EABDECF7
-:10986000AC776DFB2CBBDEABC80F5223D783ACDECD
-:109870006BCE7A605DD08AF6DB5A8C897E02E081FD
-:10988000F6AF3688766F52BBC583FDBF25D607B5C8
-:109890005BD73EBFD50A53BD77F07DCB828FEC7A84
-:1098A000EFBAE15D61C37184E04D0CC2F1BEB3DE7D
-:1098B00013CAE7A9BF217947B19282EC1F7F699251
-:1098C000F2F74A20D283FEC50E2545FE640C36A071
-:1098D0001F7275204EA92A23F9A3CB2EE6ED7445FD
-:1098E000237F6A005270177BBFA154A1F8C862257C
-:1098F00019F1A31D21252D0AAE827E590BF63FD604
-:10990000A0FC2F1B9EDB8ABED845FD3078B0DF3B24
-:109910008BA23B91AF364E520DE4AB9D936E20BFB0
-:10992000F96D2D3C7FF0B6F355DA676D7A3942FA5E
-:1099300077AD12FF2CD6B74CD5403FFAEAD0472F6F
-:109940002D67E5BE96625D3A87E641705B3E48B49E
-:10995000CD74E42332B80371CAA7233FDC6D8D3C7C
-:10996000AEC37ECAB1FDEA0546BCDB40F1C5E418D2
-:10997000FBDE59A792FD7A5B45D57C1C6F539D4653
-:10998000F6C6A6C5552DE4C7AB0B91BFB2246C48F3
-:10999000E8678FCE519901CECAA5460BDA9B91D9C3
-:1099A0002140BF5349051F2F7206901FCA0F3D89E2
-:1099B0006AF68C76A990198BFD2DC97C09ED99BAB0
-:1099C00000F9E1D9C4F6D78EA39437FE23FF0C101B
-:1099D0001EFF441910EF367DA33D83ED87CD638CC8
-:1099E000A60BAC9729AC5EA44B81CC8C02EAF51493
-:1099F000582F5D60BD0CAF17800B87CDE78338CF44
-:109A000023D4D81F9EC7E8C82BACE4F6BBD36EF1B5
-:109A10007BBE8F362FF42ABFC80B9D0373785EE898
-:109A2000F0EDED7CD091E60BE0CBC2298F5C7F6D31
-:109A3000F3F07E63FFB81B62987FD959F655F1BCED
-:109A4000913FCBC5FBF2353194779DE5E27BF98DF3
-:109A50004DB9F6AF77FAB91CAE81C4B0742811F0D5
-:109A60001F62B0637E4F8DC2EA47F2D7574B7DC36A
-:109A7000E6596A8AD540EB76B18FD66D008501AE86
-:109A80009B0ABE8EFD904A54F37855B4DCB17EFC3F
-:109A9000F57B68FDFCA25C06A98EE813473C7AF9C9
-:109AA000C4CB170170942B4F9E4FB6FE99F8C4DFBC
-:109AB0002517B47EFC3D05D64B17582F53583DB59E
-:109AC0004B2A48AEA83D05D64B17582FC3EBAD9D8A
-:109AD000AB727D0E7F68C578BFFF139AABBCF613DF
-:109AE00021F7F7B3C3AE72C72C777B75B6BB7DC7C2
-:109AF0006C777B750E6F1FEC800518CF2F749D1C43
-:109B00003CC17552A30D5F3F5237C2BAD2F420B6A2
-:109B10002F510CC89492BE4A0BBD95331E7E9ACA33
-:109B2000D77F959FC7CF6F53F420EE23FFD6E72949
-:109B3000A93C9FC09EEF48F0DAF2F7B7B2B0B7F297
-:109B4000E47D438C9F7FF043288E768EB1506B78F6
-:109B500085E1D1FF2CCF7BF7F6FB8A9A9CA63AF6DB
-:109B6000C5CC3E83A4C30F737E99C2F36D181DD07C
-:109B70001E5221D158C9FA6BABF0913DA28447D057
-:109B80001B150EB995232F2FEB970213CF53D02718
-:109B90000360FE9B7CDC501C08EE08F4D166BA180A
-:109BA00053E54E07180386C493BEE212CF13ACD719
-:109BB000519E95064F75BF9751BF92791B1C2F1A66
-:109BC00045BF4A1FE5CB9CF27E478037087753BFDD
-:109BD0006C97547A7C6CB65F7F2C452F314F56764C
-:109BE000E4CBE1B908CA37F1C53394DF30214AFB31
-:109BF000B2B5A5D7B9F2C1FF59AD72F98754BDE32B
-:109C00005A09E3BA15579B7DC3F079331357E4F72C
-:109C1000AC586EF6D5E4AF3798A78FF99E39D64188
-:109C2000879A4CA3FD6E4D0EF3FDBC92227F63A775
-:109C300054321DF32DEC7A4A0593B40CAEC84CD3C4
-:109C4000C2FD5EE7585F1CED5405D6EF93CE62ED82
-:109C5000E4C571A7FFD2FB542A94B79DF3B95D65A3
-:109C60007A12E1147AB26D047E1FD1EE51E3C95C21
-:109C70007ED16FAB7C5FEB0FE5FEDE176A78409D0F
-:109C800035146F8F217E717F3B06BAA4FFC3D9873D
-:109C9000F2A52AF6BC8478585BB62836DC7CD90657
-:109CA000EAF0205D18897F16321F4179300C1C3F85
-:109CB000CC0507840BF37FEB0BE3C48783F65229B3
-:109CC00088FD98199518DF870457DE32737306CF25
-:109CD00043F897864DA49F6C6E01F457DB76936C26
-:109CE000865EF5113DEBB9FD54C3ED2193FDC179BD
-:109CF00044EB87B7AB654FF939D56D0FB535EF003C
-:109D0000679E9BF75C85FD4C871A5ECC8D8FC2F6F3
-:109D1000C3B7337EC13CFB8DCD1A22057A9A752AD2
-:109D20006F688E51797DB341CFF6E61A7ADE8C4D9D
-:109D3000E7E2F9A7545725C35B57EC81D8E5ACCAD5
-:109D4000ED283B288FEFDE05682F770F96D93690E8
-:109D5000C1DD3D09785E9F7AEB02DCE7770741F8C9
-:109D600015DA16A05D9D2DDFD1361FCBC2CF10EACC
-:109D7000BC6F01EEF76F17F90FA098DA250EBD77CB
-:109D80005AC04FFC477B576A6FB5617F414594E1EC
-:109D90009105EE3298084F50E3E505816DD43F8977
-:109DA0000036DEA7033FE0E34D11F96DB54B46C029
-:109DB00023F7EF5BAAC1FD5DB525143F52E3717433
-:109DC000BFC2ED6304DC05F6034A92EB3B718E2FB4
-:109DD000FFBA1941AF093846A23F4307F9D1EDF365
-:109DE00069CA0BB9F5F4A91EF776FFE8F0A2D6F51B
-:109DF0005B7886ED09353927C0DA47CCDE4C252B58
-:109E00004717672C5ABE058E3B3660E7392669FD39
-:109E1000DB7856746E77ACF0D0D15FCAE3754171D0
-:109E2000FEA4507893AA1847F4030F37940F67AF36
-:109E300095257C68840DCA8BB18D21E19CE1E531CB
-:109E40006689AB5C5C37C1553F12AF727DF7EB1F83
-:109E5000777D3F513A5DE299C7A784DD6897CFF5DA
-:109E6000CEB3C07E0F1627560570DD34404D8AE113
-:109E7000F5CE2F3C44F80F0DAED385ED6605E58396
-:109E80008B753D8F9775FB7B5DBB59CFCA86FD7D7A
-:109E9000062F9BF6F738AF6FD9DFA7F2EF28F759F7
-:109EA000F96B9D67B45BF81D5AC96F0B152958E211
-:109EB000A0CFD8F10DAD08DFF8CBD2318BBDEFFECE
-:109EC00050E6F2007A62CE7A776ADC0FFDCC943BE2
-:109ED00062E8AF5C77E64331207927E58C07FE3CEA
-:109EE000C0F3C5CA42899E00AD77B3BF98F1E1A126
-:109EF000876483EB21E535D4873E8BE7E3AB10DF46
-:109F000067A25D54C3FDD521F19DE85899AD3F4846
-:109F1000574FF9EF34AED77F87491B0CCEEF159B17
-:109F2000F7D0B890961AD97AAFB0A01FCF1F81B0E2
-:109F3000FB26F2A6509A48939F6F12C3A7CCBE4F40
-:109F4000BEB8BFC5CF706D5CA6FB7089542D8FFB6A
-:109F500048C00DDA9163A5E3ECF93DA417CAE39B71
-:109F60005280FA7BED990F35215E02997F0283E1E1
-:109F7000ED1F27A5C040FF6F80C315B8AC07483E52
-:109F800057F7109EBDF85A3788F7B40BEF3F0970AA
-:109F90007F7E2CC9DB0DD65358BDA943EB75077BDB
-:109FA000E6AB68BF4DE178F48EF35E4012E776DDF4
-:109FB00070D8FD7AEBDF1210716D2D4DF18D67CEEB
-:109FC000BC21867EEDCE298CFEB5F9E97F4B80E77A
-:109FD0005B19C76E22B9DB3D6923C533D7556F26A0
-:109FE0007BF228B323F0FC747765EEF69DCD3C3F01
-:109FF000E65CB8BBB18AD1A7F37999FCB4DE7ADF0D
-:10A000000954B9E28D5A857B3FC8F8AF0FE5E8489F
-:10A01000FC27471EE0EB72947C8766213FCF50D629
-:10A020008EF6805F94EF0E1C6F13FA9FE47FF9F2B7
-:10A030001E70E64BBE2FF82213E0722658C1F9A31A
-:10A04000DB6F494EFAC5D8FBF98E76F9E8968F1F7B
-:10A050001E17EBE17D25DE44CA5F49E9B9E4B3127E
-:10A06000FBF42F173ACE7BB52B694D47F86B364A78
-:10A070004EBBF61B6632A439F627A1D805BF5C8813
-:10A08000FB1F259E739FFE29D38C6A6CFC9B9B61F2
-:10A0900046359E4B50AC00D6BB59C934D2BEA2DA6D
-:10A0A00047FEF27515D7EDC53C2BABD617C76A6DC9
-:10A0B00015BB1AAB0CE4976D9467FAA6BE2486FD17
-:10A0C0000462EA8CEAB194DF9DC079876B59BF0EB8
-:10A0D0007ADBE3DE2DF8F65BBA3959E3F2E034EDD2
-:10A0E0002F200FDE87788C1B590CCF39F65743F1A0
-:10A0F000CCF3043A2B86E0798EE6E0EB00E27906B9
-:10A10000C9FB9CFE0B86E7B35D780686E7A9593C40
-:10A110007757703C77D66CEEAA72E2B966D7DE4A02
-:10A1200003C7E7787E48E3E773438867079C5E3C94
-:10A1300087255BFF7CAC1DF9D6CBF70CEF7F8FF04A
-:10A14000D8EF3F0AFC82ECE1B1E313176AE43F4920
-:10A15000D1FEE94E29AF5EBA442B402F758A757443
-:10A16000A7C03FEBFF0BD47FA9E8DFD6B7421FFEA5
-:10A1700083F66F0B501FB27ACBA89E9EA27DF06033
-:10A180003D0B86D5A3ACDD95C447614FFF268C4AB5
-:10A190001FB37EAEA37E34CFF8069C949E67FDDE8F
-:10A1A00044FD2A9E7E4FB13DC1C6E926FC81070FC2
-:10A1B0007F663B2696F4F083D2E3927B363F942F62
-:10A1C00077D7CBAFD77AB85E1B6AD710DFFEBC73E8
-:10A1D000CF6EDC27BDA99BDF46BC8E761DD876608E
-:10A1E0005928B94DE376209D83B0BE51946E636DBE
-:10A1F00095E33D511E7F77EBA3F1B63D54CDF5407D
-:10A2000070947A699FB0D73AC6301955CC9EFE44F7
-:10A21000532E3FC3339A9DB7E6B69B7F8373243F8B
-:10A220005182FC6BEDB1CFECE863B4331B7B20971C
-:10A230009C4F86923FC7F9A9BA65927A15FE917C28
-:10A24000FD9626AC9D7B6792DCEDC7BC461072186C
-:10A250004D6BF4C74519DE0E69E4C288A37FADECEF
-:10A26000626B3ECAB10AC62F587F5CD33E29992B38
-:10A270003E6EEF7F10881CFB97719F9B9DA47CB85E
-:10A28000C53347D8DFB4D8F6EB6F715E87D49E0B29
-:10A29000A638F06ED3E90E2971E179284FE7713ABB
-:10A2A000158F924E03824EB098E7A19E7BEC5C8D99
-:10A2B000FC8B115F02FDF0417F8F5EE2E0A3713EF7
-:10A2C00048F68E02FE7AE8DF7D1CF77F611FED778E
-:10A2D000BBC3CBBE83F7EF58BA1A9F6264C7ED6663
-:10A2E000FABEC4A17FBCFEAAC17DF4E2C2F265A79A
-:10A2F000587328DE9FBD3FC89D7FC018AB06F3860C
-:10A3000056CBDC7F7E67D1D7280F618D15D003A592
-:10A31000A4C7C8FE5B27F2D93A453EDB5A91CFE687
-:10A32000B7566FC5FA9B0012E8976C9997A2787F91
-:10A3300054D1F4D638C2919A837A225A6AAFCF1F89
-:10A340002FC4F53958B6BED1DEC0E61B8DD9E58DD8
-:10A3500064BFB5B77079F3D9E00B0BAD7A64C53E35
-:10A36000A2C7A6BA25C5308C3F325CEBCE9F0B55F9
-:10A37000875C65ADA2C455564B270C1BB7F819FA7C
-:10A380008966E17CFA208E70E6C9179E12E476B6E3
-:10A390002C4FEBCF60BEC1D96A7CB381E7A8DD79D1
-:10A3A0009CED416E0F3E8A0E218AE30ABEA8E3713E
-:10A3B000D5A2B955BD180782319C2F304FD0C90F97
-:10A3C000F9F8E2AF8D1F5FD1E118E65DDCD21A0526
-:10A3D000CC73B965EEAFE21903E56A5F0CF333DACB
-:10A3E00098246965DF37CCFD9591CB9F7C404B2E3F
-:10A3F0000F22FEC209B2BF223393F4FC6BCF6B2451
-:10A400007ADE19E47A6E8AA0A782F49C99A5E7BA4D
-:10A410003A46CF99D975BE4EE9D10AA1E7F9387EFF
-:10A4200019CAA1FFA67DDBCD75BE46944306F45242
-:10A43000FEED865A9F0FFBFF6BE1C5862B3C97C94B
-:10A4400047A25326817A61435CF1A11CF99BE3C3C7
-:10A450008FFAE87D017CF8C35C7CB85CD0432EDACF
-:10A46000D7942BEF6E4A5072E1653DD28BE3A591F4
-:10A47000E3C5F757C1CBA0BED0922B916FAE88A990
-:10A48000B4EF564ABA3A285EC4F41EC61B56C8A694
-:10A4900081F126F8969FDFC7847ADBA15FFE180C56
-:10A4A00072FB445EBF88E2186C6AB82F63E58F0DBB
-:10A4B0001B0F4DFBFB9DF79478F3325E0BBAE31054
-:10A4C000472A961423BDF2F5F776F35E1DCFD5DA51
-:10A4D000F919DEEF2B6448E53AB72885346167F651
-:10A4E000AA84871B99AE9D86F8F8D8423C9FD9591B
-:10A4F000D13A8EEC1871AE61C5966775C501E70A51
-:10A5000085A9BFE943E763E37705AAC91247FBF4CE
-:10A510005E577B6FBBC1FE447B66B7F9430C3E536D
-:10A5200049EDC578B37D7E43DD323F436A330FDCAE
-:10A530008C8E270577A1E7388E3CD0D681FB6DB491
-:10A54000BF3EC1F8E4B78FC8F156F6F58ABBCF58C5
-:10A5500088E75A0F01E7179B3E6F3DD0362E175FF5
-:10A56000E4A3CF79A12087E714F3D759210F7FF512
-:10A570005E549C8153CF5F8BF3F197C0CFE15E8E29
-:10A580000FB86B6C4E3AE59BCF209DEC7682CFBC2A
-:10A59000EDF3B5637C95E07C95899E5D085F097855
-:10A5A0006DFA9D2CBC23F155608D6CE079AE4A2587
-:10A5B0004172B3B3F43A4BDCEB48F99E72CFB48CE2
-:10A5C000B8D74AE4B54306ED8940A949767448DC1A
-:10A5D000CFA355BBE5A612739F9B8835253276BF66
-:10A5E000E8BF0CAC5169DCC1F8711832C12896790A
-:10A5F0009C14C51FEE2B02F04DF27BB27639FD9E06
-:10A60000F65311F96A98CB4BF7B2C1E747C86F719F
-:10A610008F13BB78F8FC1A6F7D082BC62107DEF379
-:10A62000B753E090639FB341DC2B6AE3DFDCB29465
-:10A63000F2CA83E08BD3FE20D661E1BEAF43ACE724
-:10A640004E7CCEC573BCD375DAAF55F0788B257DC3
-:10A6500099FC0CF6B9337B3CFBBC995D6F24FAAFD7
-:10A66000C6F594637DEF0A717D3AF0B5D47FE33E81
-:10A67000C4FA1318780FC5E3CD1F509CFA9CCC5B2D
-:10A6800032FAF79F098DA37ECEE9EF931738D6E50E
-:10A6900039E21C0740AF9CEB9C97DF0AEC427E78C6
-:10A6A000EA30DF8F3D75F808D9E14FFDDE9746BEF1
-:10A6B0007BEA83E1F31E1E17FB22BBDEE3BFE7F656
-:10A6C000D9E34A6F512EFB2E3B7E9AEF070FBBF961
-:10A6D00015945E19F965E0A67D32FA071E6FD6A4BF
-:10A6E000D799FC9927E679CEE13E19F74D23CD6B3A
-:10A6F000AB87BEF63CB7D6737B746BFD9110FAFF47
-:10A70000B73EC1E77BB49E9F8FCD07EFAE669EDF5D
-:10A71000B1F589DCF86898C7F7C70D7EA334A75D4B
-:10A72000EB3967B54093DDE7BB4E317CBBEBB9DD60
-:10A73000B55B89874F049EBCEBBBAEA711DD08510A
-:10A740004836CE9708BDFB5D7E92035F6FF932E617
-:10A750006B2C0D9B12EE65A12FF3249B5789A92525
-:10A76000F0DE98E2FA1E6932E677C4781EF937AF58
-:10A770007E2DF3322BDFDC5444655D379E5B84F81D
-:10A7800028D5C99F72337A5C48407F732DE627D065
-:10A790007A64E5C0CD3DE7A13F4B012E2F98C56BF4
-:10A7A00028E3E85E3F72D2E4931BEC473A1EC8B63A
-:10A7B000CB3B4F4FDE6D00960C2FC796F3FA16FB7E
-:10A7C0008372A8C49367A22F74E7A5443DFD4F454B
-:10A7D0005BB5AC80BCF2931C670C6CD30CDC67D708
-:10A7E000FAF434D607630CE60D861B9981C4E83968
-:10A7F000460709CDE591F0BE0EA091FBBF33E03CCA
-:10A80000A7D350C4E5D584AB6E97709F7134CEB892
-:10A81000621A96DFCC997FD52EE4C76059DF45F2E6
-:10A82000B4037AF7525C20E9233BFCE6DAD631CE5A
-:10A83000F64B8B24DB1F28E80F86323B4B7F363FDD
-:10A840003378D65F8EFEB1E56EBC8F962ED714712D
-:10A85000793512FD4F761C9B6E43D7478BA0DB03E7
-:10A860001417EDAE195EEE0FA5DB36D277E1DADC18
-:10A87000F9BAD715492E796C3F3548419CF1892C9E
-:10A88000EE6796C7CF6EBA7F18F9233BEF67866CE9
-:10A890003FE38C1E13E356E3A1C7C473DF8CA7E329
-:10A8A0001940FE3601ED24661E111FC99EFDDC46CF
-:10A8B000C14741789EDAB35560E9A45752A03BF2F4
-:10A8C00054CE93C371F45FACD3C3742F12CA4F9E9E
-:10A8D000BFC3F3FC8B39480CBFFD80F22D542E838F
-:10A8E000857EBF7A01AFC4F80EF3FB0FBC7500F78D
-:10A8F0002BE1996E3A29078A28AF2DE43D2772E0B3
-:10A900009A6B687FE3A1E368F3FEBF5F24ECFF224C
-:10A910000893DD24DAE7CBDFB3ED7E1BBFC6B108B9
-:10A92000E5ED741C90081F659313F7E3FE0C7E257C
-:10A9300003CFCB0413F3F656FF74167D1F1A574846
-:10A9400054225DDE3A50A4B75616922F9948B6B0FD
-:10A95000FAC68140BCD520D5E2D3908E7D12D1516C
-:10A960001AA751BED6EA7FF7DF1F18265FCB8E3FAE
-:10A970000E96158BE29B5DC674CD294FCA42C95F06
-:10A980001639E3F622AEEBF5AF07C3EDB16760F41D
-:10A99000F18FD2F120E2F29F5F84F64B17AE019E59
-:10A9A0001747797A5DE5BCFC46D1944518DFE98A02
-:10A9B000F07271F8C8792D246713E4FF5BC3180E99
-:10A9C000F1087BFDE21E4963FC85C3C80BEFFCD791
-:10A9D0002BFB284FFE9EF0FEF3CF40FAC47DE48FA0
-:10A9E000BBE7FA6DAEFB93DED41BDE2FA2F5AAB750
-:10A9F000637C7A62D2CED774C74526A0D660F39B1B
-:10AA0000C408E3677838ED626845B6A9BCACB71CEA
-:10AA1000F7C96B4BB78DE1E7FD17EA87C86E972939
-:10AA20003E9D0F5EAF9D9E6FBE76BCDDDBFEAE0829
-:10AA3000BF47D51B17F3FA831E44FC9651FE2C60CA
-:10AA4000FE6CA7BF2F673CEA8D22EED76CAF5894FF
-:10AA5000B81CE7A598730F327CDC5B1AA57D90FFCC
-:10AA6000A2DA4B7D0E7BC3CE6753C47ECE5F9A22A3
-:10AA7000B9A86866D719182F7A5EC61505153D3B2B
-:10AA800025B4E7EDFB2010AD174FE5F3C579058040
-:10AA9000DBC5785EE1B863DE1073F8C1509E88FDB7
-:10AAA000DB29A0F7B4F0ACA1F49DDFC5F3D0635768
-:10AAB000F0F34D1395DCF41E7F99EEE3F1AF534BA9
-:10AAC000E77CEDF3C53DEF8AA8B47EA6E8ABF7E2DC
-:10AAD0003D771D567112E33103FE5417CAAB0DFFCB
-:10AAE000E883CD34FFD1E937454FD03D7A15297D34
-:10AAF0003A2EEF7CEDEE48ED0A129E2D9ECFE0FD42
-:10AB00007E7998EB9B9E94EF36FC6E3E9DDAE9C70A
-:10AB10007D678CEFABED7D783294BC3CECB0CF75AB
-:10AB2000D3223E9A92BC94E4C0405961F72F0CE2C4
-:10AB30002B4F1EF31D11AE97A718AB79BF9386F765
-:10AB4000CBDA78F9A04B16BF1721134438FC8C914F
-:10AB500013B82E6EE472E2EE35BBE8BD7263DF7CA3
-:10AB6000FEBDBF05F5EA1D3EB82297DFA82DC2E362
-:10AB70004193CDCC3AD41B93533E40FBF4F688412D
-:10AB8000EFC75FC6F1D43509E238EC69D81FFBCFB7
-:10AB90009E4A95F4D2D852A0FB92C6AE01D2DB6396
-:10ABA0006B206DB072D7CEB93BD1BE55AB218EAE06
-:10ABB000EBDD953758680F6CAA0013F5B8FF46B661
-:10ABC000C0587DD5F0A53150BC29B58CEE6959CB64
-:10ABD000D6255263ADD140F6C3D1182F072AF839D4
-:10ABE00098AE331582C3BE7F9CEC4EA61FFCB5FD0C
-:10ABF000265EFD65C015D48F7F2EA7AB71573D9D96
-:10AC000053EB1AF310DD4B635D033CDE69C7A515FA
-:10AC1000C65F6C9CF62BF49CFE9523A1E4B79DFCCB
-:10AC2000C0F891E44C17E613E4C0676798E3F30EAD
-:10AC300021E706FCF0298A97B4F8E83E176FFD6516
-:10AC400002FF775B4BFEE10C23AB6FECEF078B0C45
-:10AC5000977FA3E20395E6B348BE1174A43BB39378
-:10AC6000E8FE17BC18F4745A9617943BCEB3DC1B5D
-:10AC7000EF85C98867DB2EAAE5F68C7DEE91E12190
-:10AC8000730FFBAED705E87ED1F14DB9ED23B5408A
-:10AC9000FBA8ABC8FC6918F30D443EFFD7972F21E2
-:10ACA0007D9FEFDEDABB235CCEDF2559951D489FE3
-:10ACB00049FCFE196FBD83C25E64F620F1CD268B80
-:10ACC000DFBBB5896D7D1E45BEBA9EDFF3C7DEF3DF
-:10ACD000730E06D079F1D80DCBB45CEBD51B57CEF3
-:10ACE000B7EE826A5F3257BCA556D0AD24AECFF71F
-:10ACF000F1E983E9B0478B6A81EEFFD2197DD0F686
-:10AD0000AD805E4ABADFD858528971A15B6F540D8D
-:10AD10007C7F5F65AFB510E72D41EF839823A3F4E7
-:10AD20009A781EBD223ECEE8769CF72EAE7894CE61
-:10AD3000C3DFFE54000275783FA9E7F7D938E9234D
-:10AD400067E96CEBAB7CF32BF4790BC397F3F780DB
-:10AD5000308833388F220B0CBA1FD9E8253BF4A872
-:10AD60001544DD0A467D2FD72BED2178308EF7CCA8
-:10AD7000F2F2A6F054C0FB6735A597EC754DAFA273
-:10AD8000725175A29BECF369DBF55CFAE153914AD1
-:10AD900097DF24E4895369C91B9AB89F56852939DE
-:10ADA000D6D9C12285DBD3AC29C573ADE1E5EDC9A8
-:10ADB000F2C79B42DFE8D97D32F107C92E468F707A
-:10ADC000C5A2B764C77D9C61EFF9622F3D3DE59355
-:10ADD000A5E73AA4A723BEA0D52735A49FC1EC249C
-:10ADE000B2FBEB019CF7A66FD22C7E0F8361F82C8F
-:10ADF000077ECB85DDA77CA0D079DBBB9676D0FE25
-:10AE0000632CEB03F37AD933E7BDD3078B785E78F5
-:10AE10005751624984F27281EE195E27E4C679F2D5
-:10AE2000CF8298871504A6E7908F16FBE0C11C74AB
-:10AE30002D8F703CA743E6E722B3F2CFF77129F7D5
-:10AE40007DA276FB83C20F50B81CE6F39D620ED044
-:10AE500079D2819B0AD3DF036C6EFBD02E57E25C64
-:10AE60004FF719D03E93EE7F4AA3DEDD145B4278A4
-:10AE7000BF0FF529DA56B55C4FFA53DC4F0C864408
-:10AE8000F7CA86C4BD1BF7A58E3C8B76CFD11A05B9
-:10AE90003D3E10AC485AA85F8BABFB2C09F56C69A2
-:10AEA0009AE2C74C8F598867E3AE4504B75FE96DF6
-:10AEB000417D99562084FA7C008D4966C73D127EFB
-:10AEC000A403F35DFCB5695064DCD70338EFF737B2
-:10AED000602FD9597EA687C96E52FA5A502EB5D71F
-:10AEE000EB14D739EDC63E70EEEFD8B8B7E2B81321
-:10AEF0004AD97846567F7AED8D7C7606D3B3222FD9
-:10AF0000674107EEDF6829B1F2C3E1ED1D686F7E8E
-:10AF10004B37BF4EFC93679FC1F8E29E48D9E8F9D2
-:10AF2000E2B9B09B2F06FD27C2EFBAAC4E087A30CB
-:10AF30002EFD0D83FBCABD7EC0F99F7BECBE3DF7A5
-:10AF4000307CC8A84FC972E9D9F324FBBE1CFDB000
-:10AF5000AC7CE581A92ACABD5F4D90F1EC30F25975
-:10AF600014F9E71DF0917FE81DD81F9DE180676708
-:10AF700084AF13E8F2BFD6E7F03F5EDEC3CBB6FC8A
-:10AF8000FBCA5DEEF29761C938B4BFBE7CBB1FD26D
-:10AF900012FEDE29F7BEF99108CF37FF0AA43A1056
-:10AFA000CF6BC5F9A46B1E9BAAA2FD74E50CBD1264
-:10AFB000E39F361CCF0A3DFD36E363C3210FAF0A82
-:10AFC000A755CC977A7DFB8CCF9C0DD84FBA6302E6
-:10AFD000FA0FC7404E3DFEA52E379C23CDC30BB7BD
-:10AFE0007DDE281F1CCA1629A71FECC588DB0F763B
-:10AFF000B2F7B31F45FB7856F6F7D7D9796627DB4A
-:10B00000EF9FF2F47B8D86175103AC527A1AA5AAF2
-:10B010006CDC2BE8B7CC8968FFED989FC1DC7547E5
-:10B02000BDAE02EB35FA86A937D27C5687EE8DA2EB
-:10B03000BFA84F8244AEFB77CA42C931D15943EF12
-:10B04000E101F1FB820EBD62DF63DFBF08FD7C0121
-:10B0500060FB7B7A2AC407E4FF91D05EEDC9989526
-:10B06000183F565CFC5184F11466F7AE12F6655138
-:10B070008DFBBBD71F747A94AFEB7AE823FB3FAA12
-:10B080008533329E6BAD73E73FDD59F44592BB2BA0
-:10B09000F7F9C9CE5C09C6ADF533691D921FECFA0C
-:10B0A00075A7539CF8FA32236EA15C83B8496D3DB5
-:10B0B0007CB7EA0309D20E3FC12AA55FC5F5B68A5F
-:10B0C000E90FE7FBEB62B2F1468EDFDF643FFDA0E4
-:10B0D00019E11AC4838F9FA7D559D931CF233D5287
-:10B0E000238FCB19C5170FB37FBF2EA6D238CBD66F
-:10B0F0004D29E6FE21B7DC7C57E8A99F3CFC2D9545
-:10B10000EEA3FAEEAB17201E563C2E83C6C67DF783
-:10B11000E10864487FA555D45F576D9773EA77CCF3
-:10B1200074A2BC94ADDC7F79D5B6407A316B7FD503
-:10B13000A3AF9F050CBE775BFBF74CC475F05DEECB
-:10B140005704ABEFAC8BD8FBAB14F8BFB9ECA9CF6D
-:10B1500047B9BD7DF847454DB8BEA52D3BBF48FD5D
-:10B16000F65EEA0F38E2734BA2FC7C2CABC7FDA065
-:10B17000DF91D25372C4EF6CBFFBE1EF481CBE1DE0
-:10B18000FE7410E1DB72BF9A6470ACDAF21EC993F0
-:10B19000055BBF17453CACDAE18ED3ADD8FA610749
-:10B1A000E6A1AC90A17F31F2B37C8CCA474DAD5F74
-:10B1B00026B9CFCF57AF2492B07A3FF8EDA2DFB0D7
-:10B1C000EF6FC7640832D1FBF6BE83EAE3584E86C0
-:10B1D00053B8C35DB5C32DF7566D799DF222741F28
-:10B1E000F4579C8DF9016EBEF6D667EB4745FB69B7
-:10B1F00055EFBAF7D0AE5CB5FD9D5FA3FC58E59165
-:10B200009F6FE37FCA87FAA9DBA29EFB69B61496FB
-:10B210003FB1E27B47EFB5D8B887B7FDEE5ECCB360
-:10B22000BFFAA3F7EFFD67B4179E0AEA28FF577D20
-:10B23000F7852838F8F11EB1FEDE9D045639ABF7CC
-:10B24000EE7F06D278A0F5DD277F3B19CFC9BDFB85
-:10B25000C81FC719ACFEF54F9E47F7F25FFFC30545
-:10B26000E387B3AB905FD301275C69A2ABB143E244
-:10B27000C6CB13E2E9A1C7E1470654B477FF2041EA
-:10B280003FEAB995BD1FAAB83FD963423FE267F7CD
-:10B29000F6D7F77C9595DF61F409E4A00F9BFF4496
-:10B2A0001FE96F2626D973E5F6D71721BCABA09FFF
-:10B2B000F4E9107A3ECFE839334B4FEFF7A3704CE7
-:10B2C000C57DC1AA8719FDCE423A32FA9D35947EDA
-:10B2D000EFE07FE60EA5DFE351F7BD0947E1EAFBAA
-:10B2E000CA7163BA7D6CCE3C886C9C61F87B506CF3
-:10B2F0007930127EAF90385C5D51F3A728EF0F6F65
-:10B300002B1AA4EF62A4EFF78E4E46E3ED4D7FFFBC
-:10B3100017110FFD4F0674FCFD12573DF922ADB316
-:10B32000777FF89C6A505C07A2D26C5686C19FFD5D
-:10B33000C0CA2BB90F1CAE79E0FF2FFA356B7F0D19
-:10B34000EB02F7998C6E54DEC3D61DD1217D61A32B
-:10B35000817A335D46F35E99E6EB61657AE7C578FD
-:10B360001F8517EFFE62FB3ED02C3DF1BE8395DBBF
-:10B370005F5D847C978F9EF6FC759CFF1CF6FD013B
-:10B38000F77AF5D65FC9D627E9292F7DD33B7F8190
-:10B39000CF77EF0F28783EE35D71AFAE97EE59FCA3
-:10B3A0008B73F3A38C431DF7F0C7601C4AE0293F61
-:10B3B0007FF0753ED2FC468BBF77A2868B8F6C3CAC
-:10B3C0001E3E965BFE4F2CE6726325F434A2E9EC38
-:10B3D000B55714485A132BB3F01E46FB82C17BF8B5
-:10B3E000BB32F9853A7A77931CF7CA8B9590FBF7B5
-:10B3F0006FD516737B71E58E9D67A15C3BBCEB47F7
-:10B40000C49F2B1F7E55C57DC79E2D3F50FB6AB341
-:10B41000EB01F543DA81EFC3DFDF79169707B9FD5A
-:10B420005E73C57C563DE1EE7FD5C3EFB9FA5F612F
-:10B43000F592BD30D2386F2BE6A538DFB7F7F9E9C2
-:10B440001EC2B77BE5C65C76F0E462BFCB0EEE7839
-:10B450006ED16FF03CECCCFD21BA7F717BAB39FE35
-:10B4600016B4DFF6FB457CD1FC1DDAA5DB9F0B9102
-:10B470009F67FBFECF503E90DDDF631E7CCE79DE02
-:10B480005A1061FDCDE94BCC948DA172A3EE00DB87
-:10B49000EF39F8E0FAE71AC7A3DCC7FDB181BF5F57
-:10B4A0004E89D3392C39BA88F2CC65DDA70773EA07
-:10B4B0006FDE9F3FCCF7937EC698CEFBDCCF3DF688
-:10B4C0001FB47FEF88FB72E2E13E817FFBF73FD93B
-:10B4D000EFD74B9C6FAC67793C24DFFADAD81C8B32
-:10B4E000573354DEDA5C17C7B8CFB5C5FCBE9EB182
-:10B4F0006F18129E2D99DB674CC7F917432FE0791F
-:10B50000FFDB9BF5B8333E5476D86CC17A67BF0930
-:10B5100071AC87E3E27E6DB4E35AC5FCDCF3907155
-:10B520006B7B092F858CAB9DC0B8B79E8271C327FA
-:10B53000806780CD058DEBCDB3F28EAF4EE379639E
-:10B54000DEF192B63E10F1055A7AC3F8DBFCA29FF9
-:10B55000A5C586EBF7958192A17BABB3791769A955
-:10B560007326C6EF06CF1B2734C77963F69DCE1B23
-:10B57000B7993C0F96B5A375D025FC1318CF5CE6A0
-:10B5800080F705219F0215A918DA5F9D79E211AFB6
-:10B59000083EEF8C346838999DFAF4E2BE61F48677
-:10B5A000B2E69B339CE792153D23B9E2C8E6EB7403
-:10B5B0007F56BEF6DEF8A20D7FE7CE7F82AAA9985D
-:10B5C000379B80D61C706E17EB07EB5562BD581287
-:10B5D0005A1CF5D4189FA75DEE147EA1576E7DA569
-:10B5E00093E2F679F0B443D0F30574CC97D1F64DDD
-:10B5F000C3F86F57C44772B22B98FB1EFBFF2CF6A3
-:10B60000B9E4A48AE71FC90FBB8FF68DC6B1974D69
-:10B61000BC1FE9D65A95FC6091FAFD543E6AFAC8FF
-:10B62000FACF871FFB3E83C1721EFF53BDCEE9BB1D
-:10B63000DBDC46F9B1D74D558DE1F22D426BA6C545
-:10B64000316F425B73761CCF6B876AF8EF61D8303D
-:10B650000FE26106DF863CFCF13F595ADE2D008087
-:10B66000000000001F8B080000000000000BED7DB3
-:10B670000B5C54D79DF0B93377EE3C813B30C0F082
-:10B68000BE8310D1623A28A2363E2E0F0D3E62468E
-:10B69000C4A809D6D13C4A2218B436A11B1B2E02DD
-:10B6A00082F8C2266BCDAE4D47A22D6DD31653DA6C
-:10B6B000358FF61B4C74ED635B626CE2F6D30613B8
-:10B6C00037AB59D365B7CDD6ED9736DFF9FFCFBD90
-:10B6D000CCBDC30C68DAF4B7FB7D4B7EC9C9B9E7B2
-:10B6E000F53FFFF37F9FC77C4AE4089949C8EE2DD8
-:10B6F000840C151342F8B08DB808D95762B2433A9A
-:10B70000284F4F1AA6E987F0B7606C6A6DFEDB1907
-:10B71000553322F9CEBC442E48FBD999F73819A6E7
-:10B72000A9F5831612A0EDAD3C91FB69EA96C960BC
-:10B730009287E6E55B7C561F4D5D24C3544ADB953A
-:10B74000DFC2EDF08DED7F30E711EF5BB45DBA4CF9
-:10B750003220ED2C17324C3A787ABED04402749CD9
-:10B760008E72612DC0690D7F9E480991F2274513A5
-:10B7700021A9F47B5D8F2CC3FC08C90824C03C4977
-:10B78000468DAE5E0F47D6F4178F1DFF10E087B6CB
-:10B79000DFAD96EF9BF3CEA17B29FCA22C95986997
-:10B7A00037FB06AF92FC69341FBE2A73302F0F9906
-:10B7B0006E2763FB817A3E5A2FD11B241B00CEECEF
-:10B7C0006112A4E327160D1398BF43229249C27E4B
-:10B7D00010FEA4D92344A1F592E60E7B9569BA7EAA
-:10B7E000FE608E09A719E649D7D1D15CEA2F48211E
-:10B7F000C4D63CDF5F40D725811F2222ED2741625E
-:10B80000F88F6EF7CF490C3F1A5E7ACA6F490AC6A5
-:10B81000E87F747D5BCEA4F1165DBEBC670DE0DFF2
-:10B82000E2092A30FFC4D90C2F5A79A2344C643A69
-:10B830006E2261F324A5443E4693845285C0387439
-:10B8400048593F9F07547A7C409D0FFCC969588F27
-:10B8500010FA29415E74D57C2BE479F256112BFF46
-:10B86000D0477041DFB2A979F3D87CBCF94C94EE93
-:10B870006A21E42DDD7C6DD974FE5ABFF4DF1E0B06
-:10B88000C900FC7E54BC09DE61A407EDFB3675FEE1
-:10B8900016CF30E2670CFE8A19FE9CC50C7FCE28BD
-:10B8A000FCED55DBEFFD2F86BF513C71A63540877F
-:10B8B000D178D4EA578CC2AD205DD276847C0AF26E
-:10B8C000816AE0DF1E3BCB1F12EFAC06FE00BE9A82
-:10B8D000805F08C9A44D7AB82E28CF1545ECDF7AD1
-:10B8E0001F9507FA7C50930F6C5C97CF5F4D283DF6
-:10B8F000139F891CA328ED9AAB7861BDBA9153229E
-:10B90000FDFFA33809EB774A8289FB244DCF2C4CED
-:10B9100007B9D966EBB1C17CBB2C3DD84F5B8E49D2
-:10B92000EC8D21DF4EABF335373B671C9D111F8F2C
-:10B9300066810463F1FDDBAA7C6B1B7CEA8C99D2E7
-:10B94000072F09929DC20B4CFFB6B6BEF9B43DE974
-:10B950001FF2F9609C441CC7A5C2E52A349156DF4A
-:10B96000C4701E57E98A6FB68F0B270F70C69033CD
-:10B970001A9CED00A7273E9CCE9C0AA453BED985F5
-:10B98000E30C8A125B0F4B936D239D9FAB35496A85
-:10B99000A5E92EBEA9AB0ED2210B5168150B91CF94
-:10B9A0005450B8F969D309A1FD745C9A659B04B43D
-:10B9B000DFDC43023A391F74042F89B43F5E0C92D6
-:10B9C00020859377293280F1AC4A07DABA91A264D4
-:10B9D00042E6D0F182FC0C90A7CEA080A9D68F467B
-:10B9E000274E8B4CC462E8C7248740DF416773222F
-:10B9F000F5E6BB19DEDAE6860354F691EE129EEC0C
-:10BA0000A09FDA8B28BD24D1BC45EEAAA3F8E87E1E
-:10BA1000D5427A757CA08D9BEB66FAC74E6A93C2BD
-:10BA2000D0B7F9B037388E3EB603DE68BBE60BBE42
-:10BA3000EFBCA2E115FE15133CEF38917633809FE1
-:10BA4000DF27C5AB4DA6F8FDFCAE45FACE2B3A7903
-:10BA5000D54C98FE20444A5F312D7EBBDD2D6446D7
-:10BA6000416124BF870F213EBB5DBD5DF9749E8A95
-:10BA7000DFE42FA4EB45B24B0D788A4E096965725D
-:10BA800070CCBAAE96C2B47D779189B702BD1690DC
-:10BA90009019F092ED41BED4D635E8607463F13070
-:10BAA000396976C998DA008F20EFCC7BBCE3C96B8B
-:10BAB0001BF0490C3C16B9291E3FF1DF0F8F1E37D2
-:10BAC000C1D499509304F8232FEF22D23400C3C875
-:10BAD0007F5A3B8DDEA3E75FFDDF7CFE1A9DC4AF7E
-:10BAE000AF68F6103F48AB660549A89BC37CC0967B
-:10BAF000864D29E854A5D8C2ADA09A72EAFA334E11
-:10BB000011D0CFEDE23B36145DFE0F53C6EB9F27FD
-:10BB1000EF68F83447C6D3E3C7047AE78C25748C02
-:10BB20008BE02941FCB47790DC089E9A6C208F3A18
-:10BB30005D5BCFF84A2378EACC7E4EDCA0A3F72BDE
-:10BB40006285E2A6F8D809766D0C7972AFBBA21DAA
-:10BB5000CA05536C797E48956B5480F30BE9380B1A
-:10BB6000468C789AA7E2697EFA3B8FC134A994E4A7
-:10BB70000915C815017F15E0AD6A4D00C882085946
-:10BB80001F7C2288F45025025E3865B2E943E78DB8
-:10BB9000E32F1EBE5C1C09C482FB19B1E6881BF4AE
-:10BBA0004931C59BCEFEA08421A27CD4D6C5E5999F
-:10BBB00080AED8BABD7C31DDA4D0AA9D5E5308FC0E
-:10BBC000190B69EA02BC93736602765A5A3803CBA2
-:10BBD000ADDEFC10E8BBB4B09DC8E82788213BADC2
-:10BBE0007F70ED5D7ED443D76F23614A3728CB4009
-:10BBF0008E65CB61B0A779512A374B30CEA336F092
-:10BC00006F3ABD354984D9DB24961ED8E20EFE007A
-:10BC1000D68DBF3E1FFB33D998DCBBD1F97C69655B
-:10BC200022013BC07E810B812E3BB0727ED77029F2
-:10BC3000C8CD841E2B4DDB78250C7A4CB96097005B
-:10BC4000DF5B0B95DB4D342DFF95BD88A7DFBB383F
-:10BC5000871FF0D05548979CF6F3BBA79C2142F371
-:10BC60003B572E1F49827E8E9A25287FF2C3A64F0E
-:10BC7000823D65FB603FFA8736D53F247CD32C5844
-:10BC80003FFB479413BBF91EA4FF5D05D36D7AF902
-:10BC90009EEA080E035EB4BCDD4BE5DB0CA4A7B73F
-:10BCA00086293D99148E7C48E9D3E6DAE63D25C124
-:10BCB0007CE9778D3E7C917A11BE35E63D14D760E4
-:10BCC0006712726431D8919D206FD06E250A07EB00
-:10BCD00096C1CADF3FB06231D8A19D76AD7CE562E6
-:10BCE000599F57FE7006F3AADDEB4FF6EC82FA9EE1
-:10BCF0002CD2C4F01320AB74F64C41328FEBD6E754
-:10BD0000967FEFD6D9CD1A5D761530BA7CF9626789
-:10BD100035C8CD4E4A975609E87097C14FD6528D17
-:10BD20000E3B0B189DC5C3BBE57A0909EBEC408BB4
-:10BD3000A707E9D1E609A01D1D5D7F450AB363345D
-:10BD4000FAB77909F2834D0A3E753FF287CB0FECC3
-:10BD5000672D68221CA5138BC8FCE189E6110F3EF4
-:10BD60008DFE3B0BF215A0D7F745E227E3D4B75C75
-:10BD70002FC5F96C71CB93927578F4E451BCC798D8
-:10BD8000CF5792D97C3A027581FB69BF72BDA4205E
-:10BD9000DF7889BF1BF412257FB03BA9BDF9C9E448
-:10BDA000543D9E983DA2F5AF704D8316E0730F6D24
-:10BDB00047BFB6939714587A8B2764E0EF2FA604F9
-:10BDC00067EBFBE145E61F2E34BB4CE423E0673F05
-:10BDD000F5CBC293A99FD82262BAA7C58B69578BAE
-:10BDE0008469778B4CC256EAFE90EBE7EF053BDBAC
-:10BDF000E540F826A28B8E163FB66F6F99CDFAE11B
-:10BE0000343A9FBA0BE8C261D2F8C4BF0BE83CC910
-:10BE1000AC959761BE8763E58F242F58AC14E37C03
-:10BE200050EE754D30AE395486EB77F3FDABF25BD7
-:10BE3000C5DFFE798F54E703FDBD6126FA38C618C9
-:10BE40007A09B3F16EB4FFAE6C13CAD3FDF3769EDC
-:10BE5000F1D1BCE575DAFF78F4D8C3FA8FDB9F0621
-:10BE6000EFE02E84D74AD7DB4EFBB38A4CDEC7E324
-:10BE700087E8F9D294207F7808CAE9FD836BC9CBA3
-:10BE8000C09F7458BB087C1A9021DE25B4531CFB5C
-:10BE900041DF06C2CF80BEB571E418CD0B2ADF505A
-:10BEA000B5AFBC4CFB11641BE9A6ED06E7DD45A070
-:10BEB0005DE72B360A13A5D3947CB417EC85B5A4A3
-:10BEC0008DD6DB596D2766FA3D69FE1A02FDEDFC41
-:10BED000991DFBF79D9982FCBA4B647C34A11CF23E
-:10BEE0009A4858AFC76D8E483E1FE4E57D24300D5B
-:10BEF000F9FA693D5F533DD90BFC24902A8570A067
-:10BF0000871FF0333B4451E569E05832DA81016C18
-:10BF10001FB10B9B8808FC7ACE1CEA06BFC4DC80EC
-:10BF200046DF22F361DB30F2B5BC3CA38C10170373
-:10BF300081ECF287492EE025C34C6D31204B818482
-:10BF4000A9DEE8A1FF007CFC85AB17C8AD84A4AFD7
-:10BF5000110CF3E02F382F996E05F8587D4D0FF135
-:10BF6000171A1BA13E4F74F5D19FA94B1ACF2F8CE6
-:10BF7000B6E30793557FD0497240EFB5B79C206F69
-:10BF80005B22FDF05171252DD5ECF9875358DC6209
-:10BF9000949E2446DF2F503F1DE8B1E31766D21B65
-:10BFA00083BEAF27FB0CF66E46D014991FFDF795A4
-:10BFB0008BD68A8306FA1C7FFDB3EA8DED739A1C3B
-:10BFC000063CE635271BF23E25D3507F5257BEA1D3
-:10BFD000BCB067AAA17CF2A1E986FC94D0A70CF5BD
-:10BFE0003FD15761C84FEB5F62A8FFC91335867C0C
-:10BFF00049F86E43FD1967361ACA670E3D64289FDB
-:10C00000757EAB213F67F8AF0CF5BD41F1E409E067
-:10C010004F4A8F668AAF5D19CA21D09FC36DD48EF7
-:10C020009BCFEC63D0B7249BA8F631554C694057A1
-:10C03000ECAF1DF400C8F93D8F85BF807AD2E407CC
-:10C04000FEE50B16C91BA15DBB68225E9D1C911607
-:10C0500011F85EB1C78DDFE5D256E40F81AA0D7BE2
-:10C0600022E86DE37A10F376D20FF0BDC1E0E3452C
-:10C0700025A67C12B28DF46F25F72405C6B1FB2CE2
-:10C0800092B1FECDD2BF2F45A5FF1C4AFFE689DB4A
-:10C090006B74FF90499E9CC2FCC3AA731E83DF830E
-:10C0A000781DF57B6CA41DD8A9BC6E24EB14ABAE37
-:10C0B000FA3756D3879FB871FF269ABF684A714EE8
-:10C0C000D7C9CBE4B566DF8FD587330CF65974DA60
-:10C0D00096F810CA3B2A17CB530C72315005F31354
-:10C0E0007819E5A2F6DDD73715E57297C8EC944EBE
-:10C0F00089F2E538F88A96CB5F4E9698BF18473E8E
-:10C100000B54CE82C2DDB9F2D35D8037791B41BDBD
-:10C11000447510CAD9E8FEA95D7537C2E965F4A473
-:10C12000F9439ABF65A3F203FC2B9B44105F568A28
-:10C130002F27DA478FA27D49E721817D64F550FBE7
-:10C1400013F43DB53F99BDF9E7B52FF361DE7AFBF6
-:10C150004FD5972187DC94921ABFFF17E3EC479DD8
-:10C1600049D6FCEEFF9EF427A718F1A1D1A146679E
-:10C1700056203A3ADEFB125B77DA2291D3F62F246F
-:10C18000F84F10E9E5D4ECB34A25AC5BD0255BA9A8
-:10C190005EDD37BB06DB0993780272266178C33215
-:10C1A000D093A494C90985FE03F4E62836CA0D5B32
-:10C1B000941E15401F278ED5BB9A7CD0FCF389E4D2
-:10C1C000CBB752D438D92C324B2F5FE2F9E19A7CAD
-:10C1D000D1F0B0E0831611ED8E0F68B9664FD07EB6
-:10C1E0002C397C00E2CC829FC84762F0DFCBAA5E8C
-:10C1F000EE3B6997812E5D6B04F4B332FDE172C8AA
-:10C200006736113FE067F670980469FF3FF4B0F5B8
-:10C21000C8F48738B0CF332F873880F3A085C58521
-:10C2200032B785387DDCE89AEAC7FDEEE2A37E5896
-:10C23000F78A3C17F2E9671713A48F21EFC69E72A5
-:10C24000D857984BFCC03F2E0F4F32217FDE1A4249
-:10C2500079E21F51A8AF4392E944614DAFB490E930
-:10C26000F751FFFDDD161BA6D75A444C2BF38A0766
-:10C2700017D07A5B7D0E8C1774E43B709CCE5C010A
-:10C28000C7F98F9C87F2C02EF8758B17EB773DDED0
-:10C290005404F184CE93FF8971CD083D53AC7901EC
-:10C2A0009E30EEF710BEC90BFBBE49F20CDC27ED49
-:10C2B000B404FF7103C413D70AFE6331F837E9E50C
-:10C2C0001FA19F0CF8013CB4DB195EACCE26BF1B4E
-:10C2D000E2FD93C8FA15B1F854C513A530B340E98F
-:10C2E0003789910611E686DA1241AFFA493F059B7C
-:10C2F000583A421CEC8790074509E245D9B6D02050
-:10C300009467D78BFE36AC4F705F415B278B9D04E3
-:10C310008EBBA05E98DB42BFBFE811D9FA0D8570D5
-:10C32000DFFD37176E1FCC21F1F97B4F4BF5D92A72
-:10C330005D3CD64562EF0BFFCB6D15160FEDF77622
-:10C34000806D26ACF7AC71F5E38DF67BBB8753E3CC
-:10C350001393D3C15E6EE663DB996691AD0FC47F24
-:10C36000C08FDE5A28A5BB5DFA7E183ECC279FC73A
-:10C37000F57116B3F9B77DEF8DCD8F513AF977DAB4
-:10C3800010E255AF5CFC0CFA8FEF254BFBC1EF526E
-:10C390007E6C26B0CEEF7D7FD669589431F36E392E
-:10C3A00093CCEBE249EF7DFBD5320BEDFFBDE75EB1
-:10C3B0002DE3510885101F5A79E387AF9541FC4A58
-:10C3C00068FE4DE6650AAF52418A9A204F0D68E635
-:10C3D000876E591A1E076F07D31ED802F1C2509BF1
-:10C3E0004BE4A8BDF625E71F05A0C766809FA60FF2
-:10C3F000DB4676727489B9F4779754D1FEB6728AA7
-:10C40000E2E2006F8A15FC0A72C1EA07BAD95AC87B
-:10C41000F4E5D607C59002722CDCC4C8DDF65AE6F6
-:10C42000652A87ED3F0DC11900D2CE052A13207E63
-:10C43000378D20BDDF76AD290FF695DD44C8073A6C
-:10C44000B498CCD8CFC84567A817E56FD32C9043D4
-:10C45000AD171F9D0CEBF57B55BE6871B73453D3F8
-:10C46000813A1FC4DDFC1877DBCDF7639C3EDE7C90
-:10C470009D5EB6AFC0571235DEF5DBEE7076841EDA
-:10C4800034FE8A6EB7B785F861BC975A6C98BED0F7
-:10C4900022627AA2C58BE9F75B244C075A8A30EDF9
-:10C4A0006BF1FB0B2C00E76C4C3B2C647D40476729
-:10C4B0005FF0B0FDC87B92CABF0074FE24EDF73276
-:10C4C0006DF745DAFE32AD3FAF366C86B8CCBC11A5
-:10C4D0002A2F2528EFC2EFFB697F506F6CB9AD049E
-:10C4E000CA4BABFBC380C7D262FA9D407F7D587FA9
-:10C4F0007FCB093F2B1FAAB450FC96FE96953BE7D5
-:10C50000D27E68DEA9F643C72F61F567637F745C4E
-:10C51000CCC7E8B784C173A224163CD1F5A9956FA6
-:10C5200026548F88F0BFE0EF59240EF75138123EA1
-:10C5300006F2F882B51CF4E79E12926FA2FACD9231
-:10C540005AC041FEA966229A4BA8CACBA8D9554E1B
-:10C55000A09D8CDF95557CE8980FF513F6ABE9A705
-:10C56000E4EA30EA9D243FC937BB69CAD381A753A7
-:10C5700054DF4722E70D503EB13CAE076D2756937E
-:10C58000C8790332717DAA5FA2CA63D3DB474D210C
-:10C590003EA63FF771701EB1835F4B7DFD7E924BCF
-:10C5A000F3AA7DF645B5DEFE7965491B21BFF8810A
-:10C5B000A7200EFE1BE2E5603F7EB47D943D77B878
-:10C5C000E54C5A55A1AA1440DE6F138FE8EDDC6CE0
-:10C5D00085D2AB8E0F7A9AF8EA5E8C2F04336A7498
-:10C5E000FAADC312CCA0CC4BAE3FF18F8B413E8055
-:10C5F000BE06393D7784E9F751BDFE5B261F357BCA
-:10C600004250D76B9FBCB12D01F7D3A83E92C0AE6C
-:10C6100008920ADA3EB17CEBCBF09D9418BF270854
-:10C620008C8F32BD210EF2999EC04F3CB0DF907CC2
-:10C63000487E86CEF7B7035609E8AFEFE4DA7A888A
-:10C640001B3E4C12253BED27F3A54B02C0D1611ACE
-:10C65000168008473CCD4B786A0775089A9CA486DB
-:10C660000F5DFF8E34552E90DF7757D1FA074DC1FD
-:10C67000AB54578ED63FE8086E813CFD936D54AFA6
-:10C68000EF1D8DA36FEB96294DEC55E3E6239ECF6E
-:10C69000762BD990A7F5DD2CDF4EDBEF750F794DAA
-:10C6A000349FC86DE93E930379ADFE966E85B6BFA3
-:10C6B000EA61E700882BE803B9379A17693E41978A
-:10C6C000E7599ED858DA77F23F05D0431D6923A772
-:10C6D000B3009F3FE4FA41BE36BEFCF541C86FAEE1
-:10C6E0002712C4E7324F1CC175F8AAB97C04F0D6F2
-:10C6F000D7724644431DFEB475A176EA142FC17863
-:10C70000B210E242F960BF15F798D07EDB4E49B017
-:10C7100004F0DD9506EB5C91C6FC812921DA8F8E51
-:10C720007FA650BEB34E0775651919D6FB5BC46F63
-:10C73000027811E5F01FE57F2F01FDD4375B714CC6
-:10C74000A5E36DDAC0FB5B25D03FA15601D6FF04FF
-:10C75000877AC2772663C73768FE5A7F4A2FF81B4D
-:10C76000961D8C3E37F9FAD3A6D3B4C3CEE86293B4
-:10C770005BCDBB8DF976D59EF4BA157732FDBEF947
-:10C78000C4815C3000AF1E9B857EE4660D1E720086
-:10C79000E1B93A3827E9363ADFC69FB2B866E340D6
-:10C7A000C912987FE31E13013F6EF300A5271D7F7A
-:10C7B000ECA37C284FA6F3907BA6F2943E02070BD5
-:10C7C00096DAE9FA7E3D5F16015FF569B7EEB6517C
-:10C7D000E7E8EB823805E8A13EAD7437D0D3A6393F
-:10C7E0006F213D26A596FEA49AE2EBE8DDD54B40ED
-:10C7F000ACA599185F5282433967766F43FCFF6B93
-:10C800003919B1BA119DB8CF9907FF47E19B2CCADE
-:10C8100015505F5C465D22A053217012EC10A5C23A
-:10C820008671D20A711996E7AE21A66E0ACF112938
-:10C8300039B99536B517C826B053F2030E8C7F9AD6
-:10C8400013AA76803F7AEC1CCB47D6E912E2C55199
-:10C8500014EAB7D17E6E71F122F8226966D906EB2F
-:10C86000467979E85829F00BB303942F1663BCE797
-:10C870006022A97F8EB63B6ADAD8FD235AEF68B2F0
-:10C8800087805DD9C171EB6BF07BC5D4AD743D8EF3
-:10C89000AAEB6776FB4558AFA36E637E2FB7F141D5
-:10C8A000C0DB23A92F2E81F9A559E59E140ADFE7E5
-:10C8B000525FECF666209EF36DB4FC737FFD42B7C9
-:10C8C0008DE2FD68AB9C29EAF293FF40A536CEE3EA
-:10C8D00005E453DEFDC587808F69F98F6D54FF7EB7
-:10C8E0003D59B307587941BEC6D7D4AF9D4DE168D5
-:10C8F0001DCD2BB622D8F78AD4AFA27CFED5A7CD0A
-:10C9000044EB1FEC09C79C7E9BC38CF3200EB067E1
-:10C91000A6F168CF38DC6C5D1D53F2D14E3A6A67E0
-:10C92000F81AC93161F922F3B322C407AC53781362
-:10C930009EE5214D01D0CF7C364F58BCF7B03C4529
-:10C9400082B029DB1FE47A56A07F682FD2ED071250
-:10C95000F0638DFB877C54BED03A9C61A27AD87379
-:10C960006105974BFBFB6CAAEA2F7A4806C4631F4C
-:10C970004D6572E6D18072BB45021A1B66E75649C7
-:10C98000603AA4E9EB0AD2C73BBF32F65C4018ED2F
-:10C99000B23D2E938AB749BBC305D45E763D27824C
-:10C9A0001CA16A7EC761D06F1E1EE9A610F89FE623
-:10C9B000B7B9591CDED7B7E44BB3C13E7CB5D00440
-:10C9C000FCCF8B7E11CED99527942681DDC68FD2E0
-:10C9D000E9EB4BC240378373EE043F5000FEA59F46
-:10C9E0000FDBD9F9D0910CD20F7161DE2B13FD3E14
-:10C9F000A1C6BF3B5B6C98527FFE5DD01F5FEB22F0
-:10CA0000B84F2078039897DA09077CF1F2A7EEC6B1
-:10CA1000719FE10349EB40DE9E63763D900BC63982
-:10CA2000C24F7010E778DF16488279EF771BEDBFB1
-:10CA3000B23466C776A632F9D9D9C2E2A0C2F54FA0
-:10CA4000605CA7C3A2C923D7D2F05CB0E783788E1D
-:10CA5000D61ADC2683BCB21145117571725BB631F2
-:10CA6000DE255CBF95C58752D938D1E70D5C9CD6D1
-:10CA70007FC1EEF1FC032D8D3E9FD04C02288FC864
-:10CA8000103BF7B06D57657AB2AE9F6D9C9C2E8EB1
-:10CA9000431F0F5F379390EE9CCAC3FC8800F37965
-:10CAA000F8BA80DF897738B115F66528C175C33AC1
-:10CAB0003EFF5DD44B0ED213860373568853E8CEE7
-:10CAC00085122F3F324AFFF911FEC07D752E067F79
-:10CAD00048C67CF47EFAA3E03BD37F77387F2DC035
-:10CAE0003CDFAB242360871232BC08F8B7B1D28197
-:10CAF00071EA87498FCD06062EDF23EAE3C58D0351
-:10CB000097123794E23E960476F0C32F951BE254B9
-:10CB1000DAF9302DBFF9C4068C1F3E7CF49A30B58B
-:10CB200014C118B2507FACD1D673C69A1FA96FB783
-:10CB300004952CA0FF975AE52CFAE95B00279CABE3
-:10CB40006A9E340BFCBFDF8AF519802727AFEA8F76
-:10CB50003536D41FED76EAAF019D5E9C8CFA9416B3
-:10CB6000F3A09FB5F15778181D8EA8FE7C023533CF
-:10CB700001BF1D8EC01566B41399A7F64E47B24685
-:10CB800037CDDDA0FF0E0A11B908933DE860F9E446
-:10CB9000B4E6EE76A687B1FEC893FC6EB0873AEC99
-:10CBA0006ADE43307F50E8413F41F9BE5502380FFD
-:10CBB0003A027EF007951D5324D02755E92E9C8715
-:10CBC000E5EFACBD200F333DC1AB60B7100FB38FA5
-:10CBD000DE4BBD904B5C31FB19E16EA41FAFB11F62
-:10CBE000FB5C36FE7B9C39B0A334528FB60FE3B9A1
-:10CBF000807B6C18FFD1EA1FB618ED642D9D92C69C
-:10CC0000E20C204F80AFB5EF42F03EE45F2B69426B
-:10CC1000FEB57A8DFB451A3F0BD7A718E297DF4A7E
-:10CC2000F5E1FA687240B85E8CE59D2A9DEE847D40
-:10CC3000F471C7498E33CE0C9413F1C72953E5081C
-:10CC400051E3493C9E33D3F824BEBC30C671A3E502
-:10CC50009F966AF2EF884AC7FF600F2E4CA3FFFF32
-:10CC600050A87F91035B076F85F5F9A36AF716F566
-:10CC70001D3809E47745945B5353E13C957C1CD205
-:10CC80009BE59BFA3436DE5839C6E20FDB1E945022
-:10CC90003F3FC3FB1DFE1870D75F771AE4577EAA8B
-:10CCA00084FDD5F30ACAB1FAEB8958FED1FBB793DC
-:10CCB000D08CF1FA7761F968FFFDACFF973FF5E39F
-:10CCC00083B3A1FFE3169355E7CF6D3BBE301DE262
-:10CCD00095DBEC542E1BF95606BEE57D64D40F029D
-:10CCE0003EDFAFF945CAA2DD5573C16ED5F1F96CCF
-:10CCF000B0BF22ED79BACEFB1D5AFB3B77833D34A2
-:10CD0000A6BE33AA7EBED6FF6AEC3F1A1E4D8E40E9
-:10CD10001EEC2DFE0F560D3E9443074C51FD8DCA5F
-:10CD2000A520F6B7690EB33392FEBAFE270A0FF4B8
-:10CD3000172ACF023BEB4122C139E768BC27A9740F
-:10CD4000587F7D92615D23F8BEC5F0FD9F5BBC24DA
-:10CD5000A4E3B7CF04B72D027E4BD2D689283BB1CE
-:10CD6000DDE12C12D2F1DDFFC0F151E1B82D0E1C36
-:10CD7000F3FFC270F80C7C1981A3C0F0FDA3C2615F
-:10CD8000B65DCFBCACCB5B4492A5CF97846D599771
-:10CD90007576CB8C33A2213F73C86BA83FEBBC6484
-:10CDA000289F335C6428BFED8ADF909F3732DB50C9
-:10CDB0007FC175D9902F278B0DF52B6D2B0CF98525
-:10CDC000E25A43FD696A9CFC76EF0643BDC5D283F7
-:10CDD000867A4273CA77C07E59F0C1021BF8173BAE
-:10CDE0005DA6EA10C5CF4E3E684B8E211FCBD47E88
-:10CDF00047F59D370DDB2F149BDA411E2EA4AE7034
-:10CE00001BB5D7D2EB02EDA0F7AB45229AD16F0E3E
-:10CE1000B1F8C9072BABE0FB9D8B89D8ED8EE46F91
-:10CE2000FF2B42206FCD96F15C9BBDD884E7067640
-:10CE300017D78CBBFFB04FB5DFF744E9FB51FA3190
-:10CE4000B3F393D1DF8BD3195D1D58B08FC03E81F2
-:10CE5000CD15C27B3E8353767A21FFA505DFF6828E
-:10CE60009FD135E5112FD04F67CE570DE7F21C0546
-:10CE70006C7F26BADFBF55FB2DB8FEA80DF4E7EE98
-:10CE80006C86CFE87ADAF9F4DD361637FFB8E6B902
-:10CE9000F8639AE7E5746667EDB68530FEDF5DF40A
-:10CEA000F1C07FAF3ACE81058F1306EFE3780EB95C
-:10CEB0002B4790F47A564BE1DE28CCA7D3B7D30B9F
-:10CEC0007AB7CBF788C1FEB7C27C628C63F3323C81
-:10CED000ED163FDEF93CFE27CF6767CC7D775B9C84
-:10CEE00079156BF3F2AAF7283EA6793DF5179E5700
-:10CEF000581D2F359DD9A7BB25C64749E6C0CFF39E
-:10CF00007DF1F92F69B6F19C5282DFE807E417043E
-:10CF1000C63D7F745EC54F3C7E5D635152018ED726
-:10CF20005BD839DB7380479A9E0F4EAA80FB0AAF0D
-:10CF3000C3792D0EDAEF48186F1DD606CD063827B7
-:10CF4000920F25E9F9888FD56B8CED56059CC6F3B9
-:10CF500052EA39038AA7FD105FD6F036669DFF4C72
-:10CF6000788A476F378AA7EEA29BC3D344F49D9A71
-:10CF70002E21BD4C84278D8EE2F5F3FF2A1D2DBE98
-:10CF800071FC20FD7CDCF8F9AF463FF7A64B37C4B7
-:10CF900067FFBFE2E7F11BC4CFE8796B81D4C73AE2
-:10CFA00007D2E915900E27734D6717839FBDD88C64
-:10CFB000F1B3D70E1734927C7D3DA6075E5B36A990
-:10CFC00011CF8F553BF1ACD65953EC7E5F53F1F145
-:10CFD00090D7AD9EA7F3A782DD7BB67AE5B8F322A2
-:10CFE000CBCCC6F38BC411999F99F64BA40A8C9FA6
-:10CFF00051BC1E1B67DDB5758B37DE8DAEDBD9EA04
-:10D00000B69B5A376D3C8AA798EDEEF6E6DF10DF47
-:10D01000C309768637761EA0EF7166B7F701BE6941
-:10D02000BFBF84A20CB0FF09C6FD56AF493F02F056
-:10D03000BEE665F1F001416AC47741562EDB0DE78B
-:10D0400051CEAD727310D2D0E038A6AE67595D6C88
-:10D05000BBF339B53CD29E2393A5B1F58EA876CF0C
-:10D06000AA3A0EED07C2CB39FA773FFE21AA3CBAA5
-:10D07000FD4BDE442C3F17E73CE6B7D4F6AB6BC75D
-:10D080006F4FEA53F0DC1F21528EFE3EFA285DA955
-:10D090007CB0C21BFCBE97D67F9D0B7EF973104FF0
-:10D0A0009DE2C2F33D84273ED8F71FED8797F1BC80
-:10D0B000C6E54686F7E87E75FD85BDA9F1FB8B8741
-:10D0C0005F6D5EDA78A524807E1DA926E27E36BEDD
-:10D0D00019CE39DC59499A707C5E427852DEA4FE42
-:10D0E0009C2F421F174CD23ABC48A3F633F0FBCA20
-:10D0F000A5D0CFC05993B8C3171FEE78F2E09F5464
-:10D10000FAF198833BE05C0159CFC53CB7F72BAFF0
-:10D110001DEBEDF78EEED7E338B73C19B448B4DF1A
-:10D12000BBD4736784047356E8C6DFAFCE3BBA9DA9
-:10D13000C7CCF6C7C91B66C45F5FEF4339B1F8E7D8
-:10D1400035D55EDEEF2D32F8C7B5812D16B06B6B8D
-:10D1500097ADB0482E289718DDA970F409C19C122C
-:10D1600057044F71E58F8A9F81F3413CB7B1BE9957
-:10D17000C373C7C5DB19FDADDF3E686AA4E911952D
-:10D180000F57C03E93AE3F77069B5F5FAF2317E01C
-:10D19000EFD39FBFA0707CFA10C1B89D2DE3E93D8D
-:10D1A00010B71BE6881AE7332D87FD8661755FACE3
-:10D1B0009096B702BC55A9C8E7EBB7AF403FFF96C2
-:10D1C0006AE6E70F0804CF01BD392F2104EF1D10D7
-:10D1D0009B3CF828CDBFF58724D2ED8FD0C71342F2
-:10D1E000781AD0476A5BE073B1E2D35206E3F3DF0B
-:10D1F000BAD83E5E3CBC9C55E5A956AF86972CB18B
-:10D20000EAAFAC36CA350DFE146BF83D12239E3ED4
-:10D210004A8FA1F1F5DD2F5439FD5A94BF547B3E5E
-:10D22000B6DF3237433DA71BAAD884FA4AB14A7801
-:10D23000B65885C7A3AC467C7EB8948890BFD32AE5
-:10D240003D0DF0DD556B8E92C321EC67FD32A76179
-:10D250005E4FF4FE781ADC4BCA2F60F2F7FD2217FE
-:10D260009E137F80340970FEAB8E28F3912F896462
-:10D2700001FA3EA7E24F83EF1C91136682BC683629
-:10D28000C7E4AFBB543A3A17A85C85E7DFDBCD783B
-:10D290001EE1526DCA72887F2B018B1F8E375D6A2B
-:10D2A0005F9970BF6E5D35BDA7D935E78395E3EA19
-:10D2B000AF5501E37AF5093DB8FFA75490A66394F2
-:10D2C000CE267FF9F2DE59347F36642A61E7DCD856
-:10D2D0007CCF86B2B473F1844FA3EBAE165D350DEF
-:10D2E000637DE56FD8BCD6D58516C296D83D877AC2
-:10D2F000F6CDA2F9860CB7BAEF387F1EF0EBAF9AE5
-:10D30000C7B707A2E9E996271D867CD97922E07B79
-:10D3100014DB62EB87F7B29C6C5F87F7E7C23AAC2D
-:10D32000DB1EBB9E3BDB85F5AEFED15C1FCBEF3E2B
-:10D3300090C5D6637D3D17539E1FC84A60E50DB169
-:10D34000FB5F95E954E59D980BEBB23E0EBC2B328A
-:10D3500013118EB73B56AF83FDFB2B51F655452677
-:10D360008343CA64E72BAFF6BED09106F4B09313A3
-:10D37000E11CD95B6EFF14A0BF0DED97D0CF4F57C6
-:10D38000EB3BD2034F66D0F4EEF3CF9D82FA0375E8
-:10D39000C4CF49F1F5C0E10C4D0F68F7A2357DD837
-:10D3A00063077D04FF0BFBAB1404252919D65D79B7
-:10D3B00008CFC5F43A44760FCA3F536F577F43A551
-:10D3C000E7AB476F6EBDEFA937DA4567C1FEF3449F
-:10D3D000ECBFAB82B4B7948E7B95D25B2B9D0FF9DB
-:10D3E000E0895BF5FA46E38778E3DEA81D78F5E887
-:10D3F000CDD98113CDF36719BE1BB203DFAF7E62B7
-:10D400005FA904F3ECB93596BCD5E4F22F55B918F1
-:10D410004D2F5AFA4B55CE5F098D0FD7670E19E184
-:10D4200059D7648447E38F2BA13607BCAB45479F90
-:10D4300006EBACD9A5A46AE60DBD17120FCE5FAB03
-:10D4400074F2AB66338F72EF2887F1E95F353F9155
-:10D45000182B6E153DFFAB264A0F401F4FF3287F58
-:10D460000AEB379C4C9322F4F87F543CFCA974A837
-:10D47000C9574D9F44B7FFAF4A779A3E9B88EE3C11
-:10D4800071E28F07326C88BF0DBC28C0FED1810CC1
-:10D4900089E589B8C80BF6EB6C76EE9D4AA85C78F6
-:10D4A00057E26AAF03EF8329DDD650215DC72BBD5C
-:10D4B000B74DD1AFE3EC4CB61EEB1BDC3B61CBFAB6
-:10D4C0008AC9BF381DD6AF86BDEF71EE7CF2A2745B
-:10D4D000DAFE892113BC9045D66DDB6086F9CDCC90
-:10D4E000647A64FDF657D1EEBB59BA5EDF64D4E7C7
-:10D4F0005FCE10553DC1ECF03BA95D00E708E3E1CC
-:10D50000A13093E1E19EFAE3284FEFDDCEA13CBDCF
-:10D510002593E1E35E3E847299B433FB99D8283EAB
-:10D52000A85CBA0493007CFC35C7CE77F30141FFB9
-:10D53000FEC6FD7B562F043B309A3FBEA7E2E92B87
-:10D5400099EA3B84E9C13B33D13F0C70D0DF5B9F4C
-:10D5500067F0AEDFBE05CF275FCC50ED6B953F2F58
-:10D56000C23ACD8CCC2F459DDF05C7C836D0179465
-:10D570006F4C78BEE47533C275F5ABDF6C827AE22E
-:10D580005417DEF7423B96E6FB9627845A75F13A2C
-:10D59000CDAEC9F7337EA8E565835DD890E933D871
-:10D5A000E9D1F6C6FFE80396F6A878FA4BE983C3FB
-:10D5B000AA5DF0A7EA834754FE8FD60BA37CBC93E9
-:10D5C000F1F1A5F3FFBE10F2D17CFCADCC8FA69794
-:10D5D000A2F9F74AEFDD48D7CA1222161AFCA39C1B
-:10D5E00010F8C1A3F41FF1933838DFF644EF4FA6CB
-:10D5F000419CEBD2DED5EB628DFF4416B3B33626E9
-:10D600004A267C1FF2754667D17222BADD285FC4B4
-:10D61000892FD6D6CC41FFF05CCD6DB970EF2DDAF5
-:10D620003F18539F935357817FDCAAFAC7FBACF591
-:10D63000BD31E0F566317CE6178C9C027CBFDFC013
-:10D64000E17D62F8D3DBE9779FF7FF60581A0BEFB3
-:10D65000685EF34FB6B3F1A2C779575DB751FF4487
-:10D66000A1FE09C5F370AD3911CEB16AFEC9B0F2A1
-:10D67000E7F54FDE2423FF300BD6F9686CB81CEABF
-:10D68000FCAF08C17D73281C579798FD0AF08B8961
-:10D69000B6D3F925D1EDFEA8CEE7CDED37298FCE53
-:10D6A0001BE3C9F1F86D14AE3F91DFFA84911CE0E1
-:10D6B000FB378F7C70F15198CF1107BE3F16DDCF3D
-:10D6C000D7B2CCAA7FE0403ED0F4EF80D0B3F905CA
-:10D6D000DAEECD3B32FD3B888E2F08E50BFAFDC21A
-:10D6E0001F295FF851BE211FF7F53AEB63F9298333
-:10D6F000AA3F141DB7117BBFD1047EB14CFC167D2F
-:10D70000DCE90D75DD7FA1CAA5A22CA63FEFAA5DBD
-:10D710002140BCE8FED1781141E7429C9A7D04FC8F
-:10D72000CBD7D47B02CAC68498F1DE992A5E278AB9
-:10D730001FACA933FAF577D51AE5C73BA1FC513DDB
-:10D740005238CE7E9446BFF1C6BB51FDD117BAB94F
-:10D75000FD8089E6F7D9AC1BD31FAB48D33C8C7353
-:10D76000D0F581B496344D7B81C2F3CEA19509608A
-:10D7700047FD82906AB4E33FF8EC34BD5D1254F18A
-:10D78000FC7EED67EF00727943689A164BFF44C741
-:10D79000697E118A7D2EE32E55AEBEA1DDA7B82B82
-:10D7A000763C7F8B3AEE1B75E3F34D74DCA67699DD
-:10D7B00071DE4A16B387DEA86B7304995FCDC6FD90
-:10D7C0001B362EE82DBD5DAA64FD79F4E330C4EF6D
-:10D7D000619CED84403CA54F50A6EACF5DA5643323
-:10D7E0003CE4178DBF0FA5EDA768F5A2EDAC9F67D0
-:10D7F0004A867BB3B5CB8C70B569F62D11310E72AC
-:10D8000015F4A527A22FEFB4FA1F043A202E09CB56
-:10D810004FA878BFBBFEDF2C307F2A3F3BF01EDBDA
-:10D82000599308F2B3EC7CC8A2C7CB851BF4AB2E8E
-:10D83000A8F6C2447234BF6804E5DBFB2117DE8F13
-:10D8400078F30BBFB3C4EAB7F67A96E11CF1FA405D
-:10D85000ECB88A98258C8B6731CB88BFF5D773F1EC
-:10D860005C703CFBFF10C8AF99608F1EE9D0DBFFF6
-:10D870004F6549AAFDAFCA339ED9FDF1E2AF432AF5
-:10D880009D4D147FD5F4B3562F7AFDB5345A5F0EF3
-:10D89000ABFC1C5DEF52D68DD1DDA81D1387EEE2E7
-:10D8A0008DABF91F5ADC37BF98B68FB12F33661C8A
-:10D8B000B55EF4386F46ADCF183F224EDC2E299B63
-:10D8C000E13718276E9794CDE2766709D38B4AC863
-:10D8D000897AECCAD17BF781B9F7C0E2CF9D06F512
-:10D8E000D6A8C66BEAEA5F3D057EAAE65744ECF18E
-:10D8F000601BEC935DDDC1A1BD113D4EB45DDE0842
-:10D90000EF15822055E307456619E3D4E43176BE6E
-:10D91000DFD3BC1AED4B2D3EDD27047624D0EFB7C4
-:10D920006CFFB76DA05F353FFE2D8BFF411667661C
-:10D93000F6EE855E17DE73DD3AEAFFF931DE38CAAE
-:10D94000FF6AFC71A2F518953771D6632279132FFF
-:10D950002EA2A5A3FB2C8254F80A9C4BE512FDBD18
-:10D9600034AD11080F78A859CEA19F5923C84B3167
-:10D97000DEFCAAC90479DF72DF6E3807BFB2DA2293
-:10D98000DBA5C8FE4BE96B0D85AF807F41270C7E80
-:10D99000ECC02FA57F82FBC1AF2FB64BB03F727694
-:10D9A0009E34E8A1F9B3777022D83D558BEF374FFD
-:10D9B00083F15671F80E8DB399A8E7B56F5D5E5986
-:10D9C00040C8370044DDBD8F1A6D9F4659BB0FEE2E
-:10D9D000CD4E4D1D30B9284ABF7B78ED3E1B85AB3F
-:10D9E000A335E085FB78F76597EC83FB786969F2EE
-:10D9F000D0026A471DCC9EB11CF2037FA3F557BA33
-:10DA00000FEEDFBD680AFA385AFE83EC65CB79D891
-:10DA10008F98A48DBF1ECBEF5AF2E0B16DB4FFB763
-:10DA20000F6F590E67D7CBEAB4F11F595EC953FA8D
-:10DA30009FABE51F4B84BCC74922FB4CB309B144E3
-:10DA4000EEF7E179F781D1FB7C2DCBE1FCF8EBE53A
-:10DA50004D95708FB3ECCB1DFB8AA710326B59B973
-:10DA600028D3FCDC9C2F2F77C2FE31A1F448F3723F
-:10DA7000CE57107E8FD9A4F61FDA2767033CCA540D
-:10DA800028E79467F655BBE13EC2F06920CB879B3F
-:10DA90007B6C69867B098A0CA68970A23C9C85E018
-:10DAA000A8FBDAD9E169ECBE9D9A2F62718AD1BCDC
-:10DAB00097E50776C4BE7FF2610E935F038ED8E5CB
-:10DAC0003D2ADF6BFBAF49E789FC6C0CFEFF3CC4D1
-:10DAD000FD6746F8E914C4433CF8E45C532BECC3FF
-:10DAE000DA189CF1F671F7A9E314B426E13B45CBB3
-:10DAF0009A9CF8AECE243F9337948BF89520FFCDB7
-:10DB0000268433D5CCE17B26690E123C4ED3D41447
-:10DB1000F6BEC9328A6A787764E1A4C0513CDF9BC3
-:10DB20009E51D206E7EB5A7FCE831DA6B51F0BA7E9
-:10DB3000B805E04C35D7946C29D6E1AF98C14DD7E4
-:10DB40005D6D277F13DE7B19189A9A0F767565B67F
-:10DB50006488CB940DD558E05CEAE51C554E48AC82
-:10DB60007D6A25932B235BD4F72A6CFE12435C5FFE
-:10DB70009D7F65E7B22F41BD86210B817388DB8EC7
-:10DB800097E33BFDF1F8BF01CEBBEBF476031FC674
-:10DB900073E60D70DE7D06F4F75301CE37423FE0A9
-:10DBA0001FC0BD0EB09B52DB62AFB716576EB8EE0A
-:10DBB00026CA0CFD7786AF48FF1E2C9F685E91FE3B
-:10DBC0008CF7F8C6F6A7DEE7D3F0CEAB781762C3C2
-:10DBD000F9AA469714DF261D3DAD52E98B4A3F7CDA
-:10DBE000D7F7C2F2E25EFD7B0584EC60E73A78BAD3
-:10DBF0008E604F0E39F07DE0329EC9C7B2A16451EC
-:10DC0000E1C6D285B6AE03C94DF83ED1C80A2EE6AC
-:10DC1000EF0F9CD7E052EDA7F4BAA079830E3E8DAA
-:10DC2000FE23FD0F7D41E38F75C8B77B197C606FC4
-:10DC3000C03CFCE169FA73201AFCB753D981E7496B
-:10DC4000DB54FCDFE10AF57211BC8DC57FD604EB15
-:10DC5000998BE5654327059867431C3EFD650E3BA0
-:10DC600027927E3E9C08E703966633FD35D03FC37E
-:10DC70007E1BF0C53213E124366FB033CB34F94A42
-:10DC8000DEFB590595AFE9A3792A5F2558875179BD
-:10DC90001BB6D922F57F9AF3DEF276AA3F3C567680
-:10DCA0001F8CDA8F36A2BB8768CD61F1DBD9C1D872
-:10DCB000FBD6C3390906B9F5547325799BCE6F6538
-:10DCC00036D3E7B387157C2749E3EB68B95498C38B
-:10DCD000D6D197C3ECF18F5F2E7113C8A515AA5C3E
-:10DCE00062E5C4136880F234937A2F4164EBBEF18D
-:10DCF00047330A210EB7D56B96E09EC34ACE9FF3F9
-:10DD00002D3A4EAD4DEA489022F4514B6C920BF0F7
-:10DD10004D47807BAF35CBEC98873FB03BFEBD874E
-:10DD200063F447A4A4DA71EC5A0D9EAD5E01C7DB23
-:10DD3000B8AB3029A887930F3C8BF13DA70AA72DDC
-:10DD40004A5FF1C67C5A5AB8D164D695BB98FEEAB0
-:10DD5000F6CAE539605FAAE79BA2EDA27BB23983E0
-:10DD60001CD6ECA2DF79199F50FE45FF319DFA8F3A
-:10DD700004EE7BF407F03C183C605488F775D9FB3F
-:10DD8000C66F1D2773C14FD2FAB92BA7D8D06FDD4C
-:10DD90006ABA489FA4CC69AB942FEBE4D919F57DFE
-:10DDA0007A4A0F33815F57E710633B73201BEE9570
-:10DDB0009374AB1FE4CD29217018D757246E58DF18
-:10DDC00085E62D87912ECCC4DD86E7A48E60FBEA24
-:10DDD000BA9152B4533F308741EFFC3C3703E339EB
-:10DDE000A94E46B7A7EC4DD88E275232CA1155EE30
-:10DDF000FD3C770ABE7FA1C9CFC87D16AD1F567EF8
-:10DE00008A5B910DEFC49E4A9D5CD2C619ED1DB090
-:10DE10007F22F6D2F3FB6EA7FC38ABBA3F4C61A66B
-:10DE200052E5A5E58FD2FA5B7298FE3BE50B0CC07C
-:10DE3000B8A7DC4404F8670F079F85FC62AF13DFC7
-:10DE400071D3D623CDC47E1F264DFDFD15E01348AA
-:10DE5000C55CC66F8773D93ABEA3E6D31263FF9E33
-:10DE6000CC7FA8F57AE0FE1FADD75D1EFBDEE81E75
-:10DE7000958F1B6D3DD570955E77CF13EF2DF38495
-:10DE8000DA55B4CADE1CD60FD56788AFCACE3AFCC5
-:10DE90003DB1F78756E1BBAEA3BFF301EF54D17597
-:10DEA0000F9395FB01EFC22FCC787EB3C3C2E8522B
-:10DEB000700745B88794E28CEDEF7E578527C5CC77
-:10DEC000DEEBD6EE2F58D4FBFCC7547B2CD15B8BFA
-:10DED000721DDE58937CF02EDB08DECFD5D631FAEA
-:10DEE0003CAE45BDC77FF3F643491CFBA1D4603F60
-:10DEF00068E346DB1117E13D6E5DBC7B9DF7DC42BC
-:10DF0000A2ABFF6932DC01FD7D7A5B96212E11CF39
-:10DF1000FEF8912A6FC15E5062C22518BE5FA47ED2
-:10DF2000A0A21FFF0A1B3F32AE9328BA71F7E6C8C2
-:10DF30003FCEC1F8CD5C11DFB1B0133C0F5BA6BE84
-:10DF40005F47F513BE5748F55235C86FCD2F02BE57
-:10DF5000179380AFCBCFE6A4EAF4A4DA2E5A1EDDE5
-:10DF6000A1DA0177A8FA26E9BC66373A248E8BE855
-:10DF70009DB17A8B53EDE868F918AD178C7635A50D
-:10DF80005B456F078CE11715AF374F1F93E2D0C782
-:10DF90002D7F11FBB26C6ED03C0DE4663547601FDF
-:10DFA00064569551DF3B7299DFE1C8751ACEE1D610
-:10DFB000D419EB25423DE0AB5CE70DF9297A7DC42D
-:10DFC0009941EEB1FE36ABF4E07BF7AC00EF372EB3
-:10DFD000C965F650499E9C9A4BD3237FA8EC83DFFA
-:10DFE000A11869E549AF07DAC97DC31E98974D04AA
-:10DFF0003FB57C6D55D1115A6EF9A905DF9D2427D7
-:10E0000062FBF7AE664EBE8FF273BE2AE71A3C6C17
-:10E010005E0D9EB05040E1C86C60F064F70F72BCBA
-:10E020004EEE65D7B37AC5B91683FEF1439EC2772B
-:10E030006BAE16BF0CB5C2EFA164D7CB3CE8BBCC2E
-:10E040007E8EA8EF6EE27BA9997ED6BFCB1FE2EE53
-:10E050002D8ECCBBCBB4A218F445579AD30FFAE25D
-:10E060007379C1329877C3857018D036EBC2100F20
-:10E0700076DFFE3C79167CD7E62799C54CD81F770A
-:10E080005E60F0F544D13F21BBD575E965F0B9027A
-:10E0900025004F5AA284EF10D1BF7CD0AB69C9AA2A
-:10E0A000DE482341782F88D8683DB0831CB49EFE9B
-:10E0B000DE260994C23E412875DA74D0730B1DFE2A
-:10E0C0009336D0AFD37DD3E15DA1170EC78EA7D70E
-:10E0D000AA7A87C27FA71EFE78FC31FADEBA5ACF31
-:10E0E00012C78FD6E8DE591DDB5EA59A00CBCBD7D1
-:10E0F0007AEE86F934B40BF81B5D1ADEF7E70536C5
-:10E10000E6A6C23A1DE1805F33FBCB91AE32159E8D
-:10E11000805DD1EEC80DC13BB2EDC99F4A07FCC777
-:10E1200083BBA1D92CDFA7E7E77601D7E348D4F971
-:10E1300035CDCF782C97E9A3D37981AD30FEE613A6
-:10E1400007F09CE083472F09E3BDEB73A378E3EA74
-:10E1500099FFD2B086BD9751BE96473ADCD42EE0E7
-:10E16000BBEA0DCF1E0FE37EF17682FBA00DFDC74B
-:10E170004FC33BAD590DF24CFDEF126435B077E360
-:10E18000D212467F1F5400BD9DD9BFA201E95A2477
-:10E1900022413A0AA2DD956D63F6A886DFD34238A4
-:10E1A00017E267A74DC4DF46CBAF59942289E6AF8B
-:10E1B000F91C7E787FE1EF8FBF213D067886B81885
-:10E1C000BC7B9017FC12E0A3BB959D27EF5E48ED4A
-:10E1D0001E5A6FA1936C85FCC2361701FEB8513CE4
-:10E1E000CC8AA28B59DB199FFC283751E55782EF67
-:10E1F000291DCF4D50EDA8601DDAAF741E9D731020
-:10E200002E9C87982B7F15E9564CC671331BC29CF8
-:10E21000FEFE899646E84A7E3637F566E0ECC77D15
-:10E22000C64DAA9C295F7B947B5B47072FE69A919A
-:10E230006E329F3DC2817F48CB5B177AB03EC607E6
-:10E24000339F657ED3265A7EBF41AE6CC0F97439C8
-:10E2500098FD48E5CA4980EB94690BBEEF776A3AAE
-:10E26000C17766EFB8103E8DE25985F794C0D6931A
-:10E27000A77868A5F99FE54A38FE6921781FACFBAD
-:10E28000E94C76BFBBCBB403DF3BD5F83E9A4F7F5A
-:10E2900096CBFCC9CC3547398827789CCC9ED4E0F6
-:10E2A000D3EA95E4559C05FCCEAA1E423C34AEE16F
-:10E2B000D97D0D159E8542A000FCB461B5BF93AB1E
-:10E2C000BF6D3E44E16B2CE6909E9FFCBB57912EA8
-:10E2D0001B7B38F6BB413DAF0AAB74FED5C1EFBD29
-:10E2E0008A7A65E9008B1F340E1CE7EF7581BE3911
-:10E2F00089F4D948E9CF5E0AEBC6ECD86B96702E4C
-:10E30000E8CB68FA745633B90831D742F60E1CEEE2
-:10E31000FF86D6DAD0EED7E4AFA8C209EF08827C38
-:10E32000FD8DCAEF5AFF117FD5EE07FAF6BD3BFD12
-:10E3300024BCEBD6E8E7FC701EF93F46F50993D7FD
-:10E340005222FC7660A4FF68FCE5E631F91A438F9F
-:10E350007C184B8F687AD6F77405BE97ACAD1FAFAB
-:10E36000E27D54BFE7B1FB578979BC0A8FEC853851
-:10E37000B644F9B9BB14DEF50B144B809F54A71FAC
-:10E38000E23B7FEF7E5DDAA0C3D76981F23BCD9F90
-:10E39000CE77203C942F92F274EBD750CC7E67EA74
-:10E3A000C9EFAE40BC36C0DA51BC3604EFBB0FF14A
-:10E3B000EC25E231902F4126BF1AD6DCC5DE05D709
-:10E3C000F4DF731CE2BF4171E13BD74BFB57207D6B
-:10E3D000128FDD5FC8A15CC375D6F84CCCD5F61D95
-:10E3E000D8BB43D4AF6F857889E6D727D605940488
-:10E3F000692C9FA6A87EFD4CD5AFB7CCB6FD59FDC4
-:10E40000FA4DCD3F41FFE721EF8F30D5F884FA8DEB
-:10E41000067EBA2D8FD92D929A56E431BEDC54DA9D
-:10E420008FF4BFE97213F28FAB9AC911D705A3FC21
-:10E43000D3E260D4836374E8EC5F04FB110BBFC2CA
-:10E44000892007E2C1FD19AEE967705E851C67E7A8
-:10E4500028167CF0F344FD3BA435798CBEAFF599CA
-:10E460004918F0CD3709E3D9BFF1FACB0957CDF9F7
-:10E4700027BA7EFFD29784E782AE3DBBF2F3905776
-:10E480008E26E139929C702DD2C535CF1C3FD081AC
-:10E49000A78DE1E95A7F25D2CFBBE99209DE096B4E
-:10E4A000ED7F623EFC5E74BD0AD7BBDF3537031ECD
-:10E4B000767CED3BF3E15DC94D212E05EE9B5DEBD6
-:10E4C000FBCA1F41EFD51F7D18CF7DB57DF37FA11E
-:10E4D000DD6D0A1D61DFFB9244A877F59903F30116
-:10E4E000BF6DFD6D58FEEE3347307FF26BDF311F9D
-:10E4F0002A8DD0F1BBDF3DF2C3DF433E9088F77237
-:10E500001A824F3E0E79529BC8EE5D055F11F4BF33
-:10E51000DF75F0F820F2A146174BFB39F5DD30012D
-:10E52000CF7968F4FB56457119F01DA550BF793EAF
-:10E53000CD7727D4C78A23EE51E7DB00B408E3AEDA
-:10E54000E142C0075D82D287F25CECCF0579EE2C08
-:10E550000E0BF02EE9EABAE3F3D9CF10B662F94A0E
-:10E560001B3B2F368DF20BBC1F457B3BFA21C4F7BA
-:10E57000BA1E5C07FD1D3613D19C118177B320A113
-:10E580007FB4B986F3530E231CD9762A15F6C79AA1
-:10E59000897AAE8BD5EBA2EEA52D19F510B1D3B4C7
-:10E5A0006C5BEC38E893792E953E19BF660EACC8CB
-:10E5B00006F9413C567FA12FD25FCEF9A66E78DED8
-:10E5C0003FB37E6811CC6349D18619300F0FC4FB6D
-:10E5D00040BF282EECBF11E293949FBEAACAC73455
-:10E5E0003180EF8CD8E4402AFC269B640DE0396E24
-:10E5F000697DC0D20A72861FC95D858AF09861FF65
-:10E60000F0A025983113FAEB52F5D351063F6D8FE8
-:10E61000FD4995B207DAD3FEB13F5B9DCCE36FBEF7
-:10E62000D9D83AFCEB0F6E3F668C9787C6F45FEA49
-:10E6300002FDA2ACC17593049CEFBB5015F1ADDC9B
-:10E64000AA8F6347C77B409EC17EEFE9BCF2C1BC85
-:10E65000D448AAC581A2F1CC4BB49CF65321C998E9
-:10E6600092BE1BBB77A6C9EDCD7B54BDFBE22594C2
-:10E670003B9B833CD3BBC1CBA877FFA545266F53FB
-:10E68000C3F2E0F39790BEEF3DC1F4EEE61325022E
-:10E69000D0B3F61EF2E68A6BA87F153341BADE2CA2
-:10E6A000F49FF642FFDDC44D2D7BB279FEF02D20A4
-:10E6B000FF7EFDBC7D0DB43F653221BD9DEAFDC4EA
-:10E6C00091364E0F1FF303B8FA10F2E366D52E28E9
-:10E6D0005F7BDF01F0C71AEBD9EF116C1E50F98B8D
-:10E6E000FA6380DFCD275E45FAD1EC5EDFD3354893
-:10E6F0006F6E4A6FF8BB095543081FFDF317D2D45C
-:10E700005DC5DEC55D52545206F47672F50F778210
-:10E71000DEDE5C4544E8FF608EFC3CBEFFFB3C87D0
-:10E72000EF511EB4F454C03DC9830B2511F8637337
-:10E73000B076543FE1F9EA60ED00F28F679D1FEC7F
-:10E7400087EED620DAD5DD194EB40B0E3EDF8AFAFD
-:10E7500073B3E4F0C3EF992C3DC16DC5F68A8B30DD
-:10E76000F839B4F397866EC3735B1A3E96560DE77D
-:10E770003279C1E0FEB565E8D330EF5F7FCF0A6F35
-:10E780007E8FD2DFFF05D640AE560080000000002D
-:10E790001F8B080000000000000BDD7D0B7854D5B6
-:10E7A000B5F03A73CE3C1226939327E1E9C90308EA
-:10E7B00098841308EF872704102BB583F2B2220E3A
-:10E7C000C823424846C48AD77E37830331526F6FCD
-:10E7D000AC2FEAA576A06AD12B106DAC51030DA821
-:10E7E00014ABB5D1528A16BDA3222F918CE083DEE3
-:10E7F000D2F2AFB5F639C9CC640262EDFFF9FFE998
-:10E800005737FBECF7DAEBBDD7DE9336D9BFF18E85
-:10E8100032802BD561BAAC03A42B6DBE3B3201D242
-:10E8200000F435986FB07B9D3A9647FE430A6DCE53
-:10E83000C5EFD3C0081501E4DF23192137408A262C
-:10E840000164516A335307C008C0BF0691AA811200
-:10E850006F31C027B5067C3800F84FCB0658CEFF85
-:10E860000058B1A8D5A1617F554F89FE329D46E978
-:10E870002D989EA3BFCB305F013778B13C4B966E8D
-:10E8800098C1A98D53ABDC4A8799F3C87D64E1BD7B
-:10E890005370FEDFA9043D0987E85D88DF310F7EF4
-:10E8A000080DC0F9F7AEF4F6D5A83C73A92E633E67
-:10E8B0002B03BE4FE591350ED82C75ED7724AD6B4B
-:10E8C00004D5F39649582FAB678A1EA4A1E4725B66
-:10E8D00012B52B95F4CD1AE5AF7E14084E59BD74D0
-:10E8E000EA072064C2C15B66C37A47B353F4F5F408
-:10E8F0003DF407E56A84C7244DB5CA4BA99DE601DE
-:10E90000585FDAD96E4ABE97FB9BD233490FE23C7F
-:10E91000A737044A204FC0C1EBEE8443684DF2DCB8
-:10E9200050143CC6131CB07D6830CC6D2C22F87B93
-:10E93000ABA89F6C9B9EB11E3715DC81926B526811
-:10E940009C20C36B00CD03D329B83E3FF59BEF5D00
-:10E95000C5F0C84AD113C163CF25021EBBE76C9333
-:10E960003760BDEA2229E4C4F9DDFFE28C525A6720
-:10E97000F54CB70E98AFF6290B695C08B8E031CCBE
-:10E98000836FD1BD53305F5DE9D5D76BBCEE455485
-:10E99000DE3733495F8FE50F3E2F1994AF0EB84332
-:10E9A0004998BFB259E04375F3D3CA8D98F620BC9D
-:10E9B0007353BB40C98CE2CEF900ACE1F9544F3A35
-:10E9C000D1FF656C1F9041972762DE111EA8E3FA04
-:10E9D000AB27860712BC4E3E9F3497DABF62B30561
-:10E9E000689C57365FBA292875EDE7A4DDDB44EB58
-:10E9F0003F89EB0F60F96F9FFF7388E8612DD28329
-:10EA00009C837BB4462BA7F2F55340A57DB1F66BF2
-:10EA10008F23504878B5272F99F183E6E945381FB1
-:10EA2000A77FF602B8F5126F8D8670AEB6B5D629FF
-:10EA3000D46E4B06C018CCBF70F7409FBB2B9CB167
-:10EA40003DEF8B4B01C65F57A847281885572E17F7
-:10EA5000D2DA304E036E4C7BAC16F089EFE74ECD28
-:10EA6000CDFDAC7085F7E0CE41CDEA065736E29198
-:10EA70002F59E3EF49F680D107E7E3682E6FED8366
-:10EA8000E5D9E9F81FDAB7CD3D42B46FD9D9E07BBB
-:10EA90002641BFAB4C3CB3F6A5211D182FB33DA2B8
-:10EAA000FECF4DBAF98949975BCC348A2E62F1DEEC
-:10EAB000EDCB253E919D0CBEC604E359ED717E5C05
-:10EAC0006ECD0B5CD84F26B5D36C8CDF717417CA32
-:10EAD0002A1E4674372559DFED227A1A963B2C08F8
-:10EAE0009DE320247267A474C5035A07D10FAD8B30
-:10EAF000E8ACBB7A0DBB047F8AC7CB674C3AA9222E
-:10EB00005CC7796F93901E13EEB3E8A7DE966B7B1C
-:10EB100010E7FBA3FD32F3D9F87A56BAAB16A0750D
-:10EB20001040DEC66B53BDC5DDD7DB66D6FB71ADCD
-:10EB30008B53B7AEAD51B0FFA12D5AA90C349E3600
-:10EB400089C60BE078B4CF2913E15319E1E319DD4D
-:10EB50005078672EE179E35C5AD750256C2B25BE9F
-:10EB6000EBB5416BA1E0DFE7F0FF3DE72643ABAB40
-:10EB700033DFCB971E93EF53D93BA67E3F7F5E4C8E
-:10EB8000F925AB87C494E70686C5E4F3EBC7C6D482
-:10EB90001FD03029263F68C37762EA0F0E5D1D93B0
-:10EBA000BF74CBF763EA17372E8C299FF48FFCDDF7
-:10EBB0003F253CA7F527E073561AD17279FF8636B8
-:10EBC000C7AE3F7574ECFA158800D1FBA4E4BFEA28
-:10EBD00089E8D94A5341F92C6CB5233EE0D26C0F39
-:10EBE000E23CCAFF2C87D627988785CF567E922293
-:10EBF000C78C6BF1890BE1579EEFFCF8F263C217EB
-:10EC0000E779E6FD0F39215DAAB9820F28E0E5F525
-:10EC1000A74E9C7BDEF5DBE3D70F1AE3BD87D69FBB
-:10EC200000EFE3D79F3A3A761FACF5E7F90637874E
-:10EC3000B19FCFE74A2C5FF651D198AEFDBD1BB70F
-:10EC4000CED9AB52599F01EF3509EB77CEE34E9EFB
-:10EC5000C7F54EF02782C374130E95B982DE2F4498
-:10EC60009FEF9BF3F81FA24F4CDD6B73991E619FC2
-:10EC70001C1A805D2DAC9776F544BC48F7B9592F26
-:10EC80005BA8B44269949CBFDFA4EF074DFADE5045
-:10EC9000AB723F0FD7E670BAB156E3EF8FD416725E
-:10ECA0001AAAD5F9FBE6DAD19C3E8AFA18A58FD7C5
-:10ECB0004EE3744BAD97EB3D593B97D3A76A7DFC70
-:10ECC000DDDA9FEBCDFD016F06CBB3F8F5CC5F9598
-:10ECD000182F412EE2F6F391CEE4F3F0B52EEDE5D8
-:10ECE00079A9E7C3A3D50773B7BF1C8507D7E5A6E6
-:10ECF000641EEE81FF1805A3CEC9176EFF65ADB681
-:10ED0000FD65FB85E9C2C21738FBE18044F5AEA77B
-:10ED100031C722BFC9DDDC1070770F9F4E3C8AC31C
-:10ED2000572FE22B7E2D21D9DE8BCAC3BDA3C7F995
-:10ED300093B9CF567EE64C81AFF1FDDE6FE2DF2C5A
-:10ED4000C24F2C9F1D47AFA77385FC3C9D2BF4F44D
-:10ED5000FDDDF08B7B726DA6FC14FB3E6B9FE04BE0
-:10ED600077F6983FC197605C294F8BA1CFD9336369
-:10ED7000F771BF5DF0B7FD7F92436B12ECFF85DA50
-:10ED80005BEB896FF72773BD9FFE7F466FFBAF4D2F
-:10ED9000617D7EBFDDD72F2B6A7FF65FDB636EA2BE
-:10EDA0007DFFDF5CBBD8AF421548BE433A18A407CD
-:10EDB000E192020ED2E5A0403D4C7482C610D145CE
-:10EDC000F778A9C0618B9E64826712EBE39FCF4CFA
-:10EDD000E1FD079F6A4054FFA0A8AC976EFB2EEAA6
-:10EDE0000A349E82E3A11E0ABAAD73FFF2E8BFC9DE
-:10EDF0009DFC5AEE9EDE2E8407161F994D7CE43C46
-:10EE0000F2BA6BBB8BE32387888F5CFACDF3118B4F
-:10EE10008EE1EC8D03BC295DCB67111FE90DF0D3AA
-:10EE2000DCB7998F7C6D3859746BEA13F1FCA4DB65
-:10EE300076CD9917907F263F57FCF561C48BDBE4B4
-:10EE40009486F5D8E42EC5FF73CA07020A3C86A94A
-:10EE500073F5E9DE878673B7850AD71BC2F69D5323
-:10EE6000F1FF32CCF6A053A57A0FF5F8F7ED945FD9
-:10EE70008D1CD389E99749FD4380B640699EE03FE8
-:10EE8000B2EB4CEF4351F3B3ABD0273A5FDAEAEA87
-:10EE900073286ADF86EF5563F223DA7262EA8F3AEB
-:10EEA000A0C5948F0917C6948F3BAAC7E427444690
-:10EEB000C7D4BFEC8C11932F872B62EA57B866C476
-:10EEC000E4A7A8D7C6D4BF3C67414CF915DA4DB1C9
-:10EED000FD157887E7E1BA173ADCF5522ADA69B905
-:10EEE0004619E59393ABFD0BC84E5AE3516122D509
-:10EEF0000E85086E750E97BA1EF9D40792D11F10B1
-:10EF00004FEFB3A1D59D8FF5E530507AD0A697523B
-:10EF10009A676CF1119D6E2F4CD6681F920702B450
-:10EF2000919C52F424407EE2E811F95D01EDCB6F33
-:10EF30006CF01826DB5554F4A97E736688ECDFACC0
-:10EF400064DF15348FF5B606CF1ADA671B781FCB4E
-:10EF500064BCFAC968CC1F7E41B1119E6D6FB1DDF2
-:10EF60003316F39F61F7329637B59DF8C995981F10
-:10EF7000DA66D7A9F65090D94E5CAEC03D4A7AF712
-:10EF800078F6F10F843D15FFFD677982DF6755083C
-:10EF90003B33BEFC8E3C21DF3E76242E5F6EB6AF47
-:10EFA000B86BFA43C4D7EC6D7620BFC5AA2CA32753
-:10EFB0009C4F5F3D930FA1E15179C50BAA9BBE0FFA
-:10EFC000E4EF1577CD83B05BF4437EAC5549464FF3
-:10EFD000F23B7C3C29F13C6E31E7613FD3A39B7E41
-:10EFE0003DFCFDE3BCF3AFD37E2609421989DABBB1
-:10EFF000F97B563071FB7BCCF13F4E4F5C5EDFD12D
-:10F000007F2F086444B7137CA7739CBE5C6E3F934C
-:10F01000068184EBC8E4EF9063E410DEEC423A270B
-:10F020007E519E96ED0024F1F91079C540F8CF206D
-:10F030009300F1145C7A29F12950EC91B04517281E
-:10F040003F1680F201D90B3644C67338B51B56DB28
-:10F050003F0847D1D10C23360F543F4ADE7C427D16
-:10F06000E37A928714A612BE9F022D554D805F56FB
-:10F070003ACF257B95A8F51CEC464F6A33E178B072
-:10F080005762383E6FF2B191F320A1BED696E711D8
-:10F090007659A1DEF37C7283E0EBCB88EE377E1FDE
-:10F0A00032B9FCABC219F182E57AE4BBEE10FB2960
-:10F0B000BF71785BF8DD27062F3EC98F9F777F2EC3
-:10F0C0002FE8EB7D2B8FE58A3690E4629349BF4DA4
-:10F0D0008AD163989BF8185426827F9F7C534F8D6A
-:10F0E0005B771318390BC8AFA1D875E267C932F83E
-:10F0F0009F4E00FFF875A79AF3C6F6735BA93D789B
-:10F1000074C1E7C0EBCA463D9FFE854B280FBC6922
-:10F11000A7FEE7F93DFA7A54813ECF13FAF40208CC
-:10F12000DB890F77819F3BD34E7EDB78387A419B1A
-:10F130002FE55F189EE905C6E7041F9B4BCDDE8ACD
-:10F14000EB9C1FF000F9696E98079E629C8FEFBBE5
-:10F15000E96F185877E155434AD6527AE9F83A9957
-:10F160005B4F66BD4F0AF491CF5DFAD5F5BE3A8F7D
-:10F17000AF90E8E390A42D61384808079237BD8F1F
-:10F180000F5C1005C715FDCA7F9F9F45E7036064AC
-:10F1900090BF788793FD56B001580FADD9397813D9
-:10F1A000C9852FF27DAF51BD51934DFFAD11197837
-:10F1B00075CAC5C30BFFEC44271782976CD2FB417D
-:10F1C0004F62BC19972FF6EBABD24B66BE8043045F
-:10F1D000E1B0B9EC9BA717845F0CFF782D5FF05F5F
-:10F1E0002BB5E0366A5AAC7FF735731DAFE57B3837
-:10F1F000FD22DFCB706EEFF7E9E12492FF0E5C7F1A
-:10F2000002BCF7764337DDADBF3B7AF9A6F8F2C111
-:10F21000E4C4F35CFC2D99E71B344FE2F32589E746
-:10F22000F96F17894FB83F4B5CF9DFFC3CBFC8371B
-:10F23000DEC8A779A6279EE74F2F129EC8EC96B48A
-:10F2400062BDD9C807A9DE373D5F082C984272E835
-:10F250001A9FF0FF1723C7253E845379F4DC70D240
-:10F260006FF5751B88EFACF4E80195F9C81BF982BE
-:10F270000F8281F399394D627F52FB884F97288422
-:10F28000EFD9D09A46FC6AA793FDD9F1EB0F99EB21
-:10F29000473A799CE004D32303899F1C1C98984F1C
-:10F2A0003C1E5FBF3EC2F2697D7962FD749B49AF2F
-:10F2B0002B5C0DD3B26DD1E72BB84099B86CC0E888
-:10F2C00043F2B64C5D4BFCC4817289E0EAE833A49A
-:10F2D00027ED07E6BD12F981735E3F207918DE271E
-:10F2E0003AE097D739CEF1DABD6A81BD7B7EBE5C4C
-:10F2F0007E66A43FC17AB66ABE5DF95176E3F22D0F
-:10F30000AFAA05D1FE7108DB800547C4E6E5F341ED
-:10F31000D36FD0132ECA6F509C29E865453F2FCB81
-:10F3200007921B643FD7BD30A6943617F50F20FB1C
-:10F33000209292CCF222D87B6CA11605CF0FF32D30
-:10F34000FD53EE46AF74C47C7FB7D685266567FE55
-:10F35000FAA3FBA6903E3F1FC2EBA8FEFC553DE87A
-:10F3600008B2639D1DFD9D9162F4DBCEFE15FE5E2D
-:10F37000EE72B7CA433175FF2EE17E6CD58CA304C3
-:10F38000CFB5FD8C63B4CE78F805EE1A9FC67E0427
-:10F3900082DF655DF7BDBB7DFEAB669CA6FE5EE8C9
-:10F3A000A75A7E1D9DCFE392ADF361453DECEA8403
-:10F3B000F757DD9764D3BF88FAC4399AB701557EF1
-:10F3C0009ACF3C8BBEE3F41C2814FE803A4FDBBA84
-:10F3D0005D517478832D9225E476781D3999FE6706
-:10F3E0004712F38FF61DBFEDE7E3F3344BEFE8214F
-:10F3F0009FEBF1D5E767F917ECC989F569EB1C6359
-:10F40000B7BDA880F5123AE71D8D79495B44F6AA8D
-:10F41000A2821EC4F5955F8ED884FD4D92FBB68402
-:10F42000711D9FC3D9E40998FE2788F5AF7AF3A32D
-:10F4300074F2634E52ECC7A3F953BC1F684041AC51
-:10F440003FF914CC4B6D25B88C4F67B86C6F99940D
-:10F450004AFD943C3FB927A5BB6AEB55C5DEE90FD1
-:10F460008A9F7F793776E9B002A177BE9E6C0C2B1C
-:10F47000C0B4BC9BF58F32EB85938D5105599DFD32
-:10F4800051FD44F1106D832C3FAE80EB358105AC0E
-:10F490006FD95CC857897FA2FE2AABE4272CB03312
-:10F4A000BD1BA0A9D9EC3714FB8F7C5DC1FC0433D4
-:10F4B0002FD5BF1DA4761B6FF1F03938F83420F931
-:10F4C0008080E173813AC9CF7E0717C57D60BA5E3F
-:10F4D000D237902E26DB2219822E4222AE017C0AE0
-:10F4E000E57F2B85831427B0D6F5EF3F273FB81172
-:10F4F00054206922E615603F63E0600A9FCBF1CC9F
-:10F50000701E4E6B5E663EC5CCB7CF9A3A6D00A6B4
-:10F51000B7253FE2213C0D4BC847B19F2F93FFBD5C
-:10F5200095E9C69FACDB7B937FE93DCE4B2B937572
-:10F530002987FC4F9E42D2535743B2EEC4710C77D9
-:10F540007180C67568C0FEF86468E475B8DD9F0414
-:10F5500008282AA812DB4FC9BE65056CAF009F932F
-:10F560001F7E2F6533AD3F493DD57A077ECA0083A4
-:10F57000EB65C4C9C72CF72A89E337BC4A9C5CF405
-:10F580004904FF9E73E3BFC7CA4B171C54899F48A9
-:10F59000ADDE9C73C89FDA086E659D706B53845D09
-:10F5A00067C12D30C9FF4B826BE04EA71ACCECDE51
-:10F5B000DF86001A45FA789BBA642BD547C3096CDD
-:10F5C000D45F8E585FA0D229F641F16DA5F6EFD831
-:10F5D0007354B27B2C3C7B68A0C9AFBBF1773C5025
-:10F5E00020F4A3EAF4C3D524E70007B5F50738995A
-:10F5F000727424F10D9497F5242F93EC06C3DB92DB
-:10F600009B2B9AD600D15575F30220BEF28EE41BD7
-:10F61000F032DB23C076D99C6981576C1AF9B26647
-:10F62000AE7363FA49411EE3D7FE57A6BEC26C48CB
-:10F63000761753BBD2CBBC53B270DC6031E8776233
-:10F64000BD60926FEBB3B4AE3765FD318DE2212A18
-:10F65000E0C3E12632E1F74DB333D86F9A5911A9CF
-:10F66000A37881C8DDA0527C4F17FA388BEB1B09B9
-:10F67000F00B1E0BFB59A4B612FEF4427C93D4CEC1
-:10F68000F247A93C5FE42FC37C8DD852C86F29FF95
-:10F69000DE0882479B0C141655D322D968FCFC99CE
-:10F6A000C359AF29A0F2CCE8F2B4E54F61BE60EED9
-:10F6B000049DC849B3F97E762B95BF01BC0E30F985
-:10F6C000F7A838FA1DD749375C5EDA91F757D07C36
-:10F6D0005FB919D88EAD31E56D0CBDD162B1CC18D2
-:10F6E00049F8D7D10F503F15667E9CA2723F7DFD31
-:10F6F00060F205EFC607F89CC0A6937FB24E6A6021
-:10F70000F840C0CFFA1EC5CD10BDF49FB76BB79DB2
-:10F7100006CB1474A7EF157457065E99E03552BDF9
-:10F720003B48E3CF9997CB7C66CC5160B830E5611C
-:10F730007E429AC4FB943F209FF165BC4BAF97116A
-:10F740008F64B9343F09C79B3B4FE2F38959735D1E
-:10F750002109FF390BE983E3A1145FEE6CC4F7398B
-:10F760003E499CFB627E5E943F1EB5613E379BED39
-:10F7700004FFD309F0397F80C077AB7DCD5A478C29
-:10F780007FE792016EE1E71830F59302E6BF22AE03
-:10F79000252BD91B117CA381F9D4611BEADFA4FFBF
-:10F7A00082C1FAF63526BD5BFC6296710BDBC1B3F4
-:10F7B000BCB17AF43BB4274407D74AACE7CE997B77
-:10F7C0007E3DFB5C8164C6DDF455599E99DF35D0E2
-:10F7D000D89EBE9AF49C12FC380DF59028FD7EDE72
-:10F7E0006D67D3B87ECFC7579CBB0451A152F09729
-:10F7F0001A8427F1CBF26B15A697EAB50E8EFFAAF5
-:10F80000695E63CF267CFE21E8025FDFAFEB83F306
-:10F81000EC53658C90B528BF4D554822BACE269E34
-:10F82000C3F08F38C82F37DBA157D1BA66A7831A28
-:10F830004843BCBCF68A8DD4FF5A17A832CADBDE17
-:10F840002D6F8608AF9095EB849388391CD7D657D7
-:10F85000EDC1E70BF5B6611CB755EF49D1A3E3A4A1
-:10F86000D6AFE9C43B8AD7D29C304C35F737919D4F
-:10F87000346480E0570F4AC0F22270AD8BE19C9552
-:10F880002FE295B2527547308DF88D66D5E338BBBF
-:10F8900007EDBE5EC3310DA15A29F647B48BA7FB15
-:10F8A000AC0CB39F1E9A1444629CD9525A6623B87A
-:10F8B000B953748A4FB4FAAD4836ECC4B72A8648B7
-:10F8C00023820CCF4DCA22D24F9362F9BEDD2EF6B1
-:10F8D00005DE157C3F5E0EA21C60BE4F7EFB6019EC
-:10F8E000CBAF8A01592C0FB89FD58A4B75EAD0450A
-:10F8F0009E657A2185FC5CC31064A4AFB7E5786788
-:10F9000050FC5EE07585FD6A6573F5EB1647EDEB1F
-:10F91000E60E391099CFF1503FD4FB503CD4DAF2C7
-:10F92000CE3CC53D56428383F0BD324E3E2E73BF62
-:10F93000CC7AE4B247ED9DF80B1427AAE713FFA891
-:10F940007AAA8B3F88F954273F8BB32F417D89D604
-:10F950003302F931F121A3204566FF32CC13721432
-:10F960001E97C82F267B56D793DC6B97521AE4B2AA
-:10F970004E3E39C2DCAFBB14EF4B141F1B407DE978
-:10F980003115BACA01F0B3FE3211E526E9D152CBE6
-:10F990001C99C6DDB814FBA6F37C255C41F9DB9607
-:10F9A0008A735208DCCCE760E3024E95E8FFCBE4B3
-:10F9B000FE6BCD71FD7664D6C7D41F727F80FB428B
-:10F9C0007A8B44FC10CB7B4FC3A64807E35A8E705A
-:10F9D0007F1B33045DC4EB312FDBDC219B8DF86E84
-:10F9E00080E54E128472087E4681E0B36507049F6D
-:10F9F0007D2E801AB44CAAACFF9AE9B9AC0772F913
-:10FA0000D80870FCCC0EF0559BFACE5D034650B47E
-:10FA1000A85FF071535FB0F4B82971FB78B9FB7E31
-:10FA200085F8D6E5395DF64BA6FEA781C4FAE21546
-:10FA3000DAF9F99661F12588E54BB97096F70FEE82
-:10FA4000DE732BF90982717A50F022F5A05EB9BEFF
-:10FA50005FD0FAE2F5A1EEE2299F1A7071F194A845
-:10FA600041CC27F935D6B2B3E2F0A77ACFF1F9F756
-:10FA70004027DE75E07360D375B40E94E72AD97D14
-:10FA8000D26F1E62BA5E8BF5E4F104CD83C1FFC272
-:10FA90007CAB0DFC14AF003EF534E1A92577911342
-:10FAA000319ED42D1678374A11F9BEA8C8125E06C9
-:10FAB00047C7EBEBBE5CF2471B65C51C1F6BC9E378
-:10FAC000E13683F16404E81954CFC2939161518EF9
-:10FAD000F8F11AF19371D3105FF228CE76541FD249
-:10FAE000BBCA4163FC288F936B15EE990AD17985C7
-:10FAF0002B7EFF0D3E779C6CE2C714F5EBE1C7252A
-:10FB0000841F96DC423DF9AE38FBE2AE38FBE22BB7
-:10FB1000E0C7918BC18FC845E247BBFD87EF05CA9F
-:10FB2000D89EF5CBFDBBE287D472DB927B88DE8367
-:10FB30002940FBFE74925AE1C679D6548AB8F3E1A3
-:10FB4000BF2F08523E7B452EEB854FA7E92F71B999
-:10FB50005F9497B519720AE6F3576139E69FCEF5BF
-:10FB60005650BE66359663FD11FB7C41CA17FC50AA
-:10FB70009497DEE97F2985E47C40B47FE1589DECD1
-:10FB8000C1F2509DD9BEBCA182F235F5A2FDC803D9
-:10FB9000A120E507DF23C6B7F4CECB4CFEF9B47441
-:10FBA000EAA5DBA93FE49F9B917F8E3B61946EC3E6
-:10FBB000FC22D56623BC5D1C09D8091F0EDBAA46B2
-:10FBC00012FEC0425F0EE19993EC56B9937FD9C8FB
-:10FBD000A983ED262A76D6FB5E95FC0AD59B4624A2
-:10FBE000417276B4EE22FE4EF1C89B51DE1499F2BA
-:10FBF000C88ADFA57B0433A2F6AB68A090F356BD9C
-:10FC0000EC748117F0B0C00B2BBEB8F52190C8DFA3
-:10FC1000426B633F449778633FCBEF50BFE2618410
-:10FC2000B797539C31965F3E56C419979E3B3D351E
-:10FC3000915D347CA0B0E78F9AF722ACEF95A15C80
-:10FC40001BD1CFD3843CBD099EDA1F495F7A9AC687
-:10FC50001ACB200DC068DA47912F7FBCEF7DF57D70
-:10FC60000196DAFC0AE111F497749AFF556DFEC90A
-:10FC7000BC9E2A80EFF54AB00E53DE2F093A368B30
-:10FC80003811C17F6699FB764C9DF7CAED6C3F7BBE
-:10FC9000743B8E3369FC00A6FB9973258BEEBF3352
-:10FCA00090F4603AC1607FB68FE3DD6F8290830687
-:10FCB000B9298EEE97BB3F7B8FE4D2F22DB174BD94
-:10FCC000025A1DC2DF1C79E46DECBF72438A4AF20E
-:10FCD0006745636CBDCA0DBF3F209574E50395165B
-:10FCE0001F08C5F2015438041F7868089F7FADCC07
-:10FCF00091B54319E4FFF0B3BC4F0221EFEF52F48A
-:10FD000030D35F8B53D851A67E7E9B2CF4F32470A6
-:10FD100069EE42E2C336335E55E4ADF1212ECEE505
-:10FD200054C3CDCC6FAC78180420CBFB5381CBD51A
-:10FD3000683F5B079F8FA3F7D2969EAD74DFC0F23A
-:10FD4000B3A07EC0F6152C424E378EF910EF9BB44F
-:10FD50000CFF3F86D6E5E0753DD4A33FF3F7D548C9
-:10FD600010CE52B28B95E256EA7388A02717D111B4
-:10FD7000F1F769B1F65612083D7E789BF0E38CE806
-:10FD800094FB75B4BF4ED05D42EE3700D157B7F645
-:10FD90008A7B55427B852514F63F7B9AE0EB17B2B0
-:10FDA00057BAB3473AF63309F5364C67FA92B6D3E9
-:10FDB000BA2F3B9B9A92289E6A66B9EC25BB6CA62B
-:10FDC000DDC84A4FA0E73F60EAD91DF57D6EEE4FD2
-:10FDD000F1656CA7F825ECB795F87FDBEB8E8471A5
-:10FDE000C98AD9BF6237D444FD5F454EA9287FBB7D
-:10FDF000E2CBE67EBF017DE579DA977879E4D81D1C
-:10FE0000774E098181D171054F0F12FC6E4281F14D
-:10FE10009B81744E94D49FF99D568AF6541FCE73DD
-:10FE20007F076FBE9CE3243E03E38271126BA3FC49
-:10FE3000E707D3129F8BBC61F2D7148A7DC3F47697
-:10FE4000CDF8038D7FD421CE5D8E269BA9479C5B88
-:10FE5000BDD3515FF0C788C5276DA2FC687AEC79E5
-:10FE60008D55EF94D9EE50ADCBBB36CAFFAA3DE419
-:10FE7000F4939CCECA37EF71AC02B69FDB9F4FDB89
-:10FE800014BDAF670796A70CA2F8A27CC3D18BE084
-:10FE9000F8BC907FD54AD841FBFBF025BEA334EFD8
-:10FEA0006A0D8C67A81F2DECB8A698EC06111FD21E
-:10FEB0006E1776607B9248AD799D1D382365109D45
-:10FEC000CBDE1C66BED8919F1166BE7776A097C721
-:10FED0006D9F65959BF9FF10790D549DE65BEE32A1
-:10FEE000ED8742752DFB5D51EF23BF4DFCF901C03D
-:10FEF00078A11F9BF19E46DFBFF3395E777E7E9B24
-:10FF0000ABED95FFC2EFF34D7FB0AFF9D357EED015
-:10FF1000187F0ED3B80B4249C071DFFFA45FBFBD8D
-:10FF20005F1BAF677D79A4FFC3651C2FC07EB5152D
-:10FF30002DBF65BEBEC2A2FBA658BAEF65C2F14294
-:10FF4000E76AF1E72DDF009D0D1C9440EFFB35C9FA
-:10FF50006BC4AF29F274E66BA79A24F68768D05673
-:10FF600047705E29897D59F9EA8D150ECA2F0695CD
-:10FF7000F97C533C3FF305494F585E0F2CEF4A2163
-:10FF80003F95E05DB357261F02DFB7D1A2F824DD0D
-:10FF9000B7D1A2EC62BA6F139DA7FB36D1F5E9BECB
-:10FFA0004D7439DDB7892EA7FB36D179BA6F135D51
-:10FFB0009FEEDB44E7E9BE4D747DBA6F139DA7FB4E
-:10FFC00036D1F58F80FFC1F112C175E206826BD385
-:10FFD0001AA74A70C5ED7AAB289BC519E31FDDCB84
-:10FFE00089EE67B967AA6305C2614F8E0CD268BA01
-:10FFF00077B32CA6DFE57215FB0950ED6039E2C737
-:020000021000EC
-:10000000FF313CE522B6933F6F962003F175E986F8
-:1000100038FDA1E5DE3AD2B76F0AC57E5F0E517E8C
-:10002000F7DCAEE7404B0699F1C0BDA137E1F31410
-:10003000D9ADD33E9FDA27EB4E305D00B4CF5B8560
-:100040003FB214063D349EF7D10E218D8E4744F900
-:10005000A98D722890DB793E746AEFAF0EFBB0DE9B
-:10006000D25EB24A74E7CC89DDEF242D76BF7B14D3
-:10007000C6EE778A1EBBDFA9A363F73B1ECE694697
-:10008000ECFE833C9DE1BCBC0F9A77387EC6B45829
-:100090007CB0E03B1AFF27F05563F82E41F83E2C68
-:1000A000D1B9DA3D7BFA685DE15CDD7CAF83F4D7E2
-:1000B0008B85F37D7170FE1CC657B819B830D335E7
-:1000C000B2535F2ADBEBE72081636ADF0AF35EAF9E
-:1000D00038DF31E18AFA0BDB0B51E750F5B2CCFA8D
-:1000E000CC26A267233385F980BEA107EFD73097CE
-:1000F000E86F31F8983F2D8ED36B96BAEF77905E0C
-:1001000013BF4E9A0DF95D2A5B845E13BFDE2EFE8F
-:10011000A842B5B58FE0DB8D0FEBB4CC168B4FFB4F
-:10012000C88F91096D0ED263BAE38333728C5F93EB
-:10013000DC402E06040F610AF05F427DB2A6A35890
-:10014000F8E79D7EE1E787401ACF6314887970A3B2
-:10015000287FFF2825C47E073429D8BF64D963F1DE
-:10016000F084BED2DAB7B05FF92530E1A8CB92AD0A
-:10017000D37F8F56A041FAF5C8CF84FE34DAD51864
-:1001800054B4AEF6F927F9E639B762C67F5EE01CD3
-:1001900092E64F7E8E6BCCF8BB092DA35EA17CC787
-:1001A000B9E4CE57FBD07E8DDFF9FB0C4ADF92B469
-:1001B000C7EEC0F1AF96045EC4DB95C11DE334DA2F
-:1001C000FFCB242FFB2BA682BFAFB047423CAF89A9
-:1001D0002E1FEBB5369761E7F328D37F09109E4AAF
-:1001E0007AFA32DDC1F358AB7E3095FC31CBC1F4E5
-:1001F000C734C7EE5F177B28CE0EAAC2FDA77EE3E9
-:10020000ED9E047814170F102BEF17145AF7CA45F8
-:10021000BC8A06E2FE77A5E947AA746DF4887338B4
-:1002200094737DA18BDDA410E0C7F07985BD90EDBE
-:1002300062B407F8BC5F73248AD7033593CFD56FB8
-:1002400074CF64BE7C637D17BF0EE3F5E2860BAC12
-:10025000CBD413C6D3379CFFE1419A90FBC9D3F7A7
-:100260001A545CD6D63F5A9FAD7188FBB9E0CF884F
-:10027000B9B730B8509C7B97997A53A5CB8453611A
-:10028000A08EF4E30EBDA98BBDF8F5EEC958F12E92
-:1002900008AFA242C6E306CF9ACCCEF31D6B1D9FDA
-:1002A0008C687BBC15E125A74C76117F5CD1CF37DC
-:1002B0008CEAF73B103E4C74036E8DF5F593CDC779
-:1002C000F6CB799DEB423C7B701CADA35956C5BD66
-:1002D000F940DD38ECB7BD54E05DF7F6AF8027CECE
-:1002E000EBB2C2ACAEF3B2E2ECA7C845A9E128BDBF
-:1002F0003DC3845FFB10EF146A57F6C7BE1E9AAF6A
-:100300003DAF714F6FD28B6F157A31EE2BFB41648D
-:100310003B48A4974E91CFDE42F95339A092FD9904
-:10032000D923207B48CF5B00EC2702DDAF13AAC89E
-:10033000FD8AD84ECEBE15ED27ECF7DD5537A6D198
-:10034000FDFEEC944569F96E8A6FC2A90EC0BC64CB
-:10035000F38AFBD9CFBCF76F65543E8FFDD2D73BF4
-:10036000C53973EE0FFEB69CE900B474E7181ACFD6
-:10037000C7EF0B44D2649E5FF9B59F0D27FDAAF726
-:1003800059F730D2CF7AD1392F8274A8491F9755A7
-:100390004486FBDD9D70CACC4F6CBF649BF03898DF
-:1003A0007C72369D8758F7301EEAF1069F879F348E
-:1003B000CF4FF28C69A984E707075AE75AAD59E491
-:1003C000B2AA4E3252E7D03CDF94F97EC567AA91BB
-:1003D0009A86E527C1CBFA63A0CDCEE744ABEEAE5B
-:1003E000E899EEEE3E6E7F4DA1B06FAAE2E2A2AABE
-:1003F0009456079D6755FD9371514D6871273A0FCB
-:10040000B3D65F9DA68032145309BCE7ABF7E23F39
-:10041000E48470DC629677777FE3E7E6FAACFB1959
-:10042000D5743F033FAD7ABEBC279CC70EAD3E33AB
-:100430002EE61E04D96BB4BEEA3313F97BC55D27E3
-:100440001C84DFD40F3D8560DDCFE80ECED985C298
-:10045000DEA8A67B0D19D1DF051D77F69FC9E54FF4
-:100460009A707B72AF6DDAE604F37CBD50D8DD4341
-:10047000B214F6175CDA0AC6A604E35AF5ACF70D17
-:10048000BA9B57D3A4F07C9A37C505271A6FA709E2
-:10049000476BBE4DE9E1255E71CE3A90DE2FE8C88C
-:1004A000AB91FE5747F1D3B3A67FA0E93BE1FEFC39
-:1004B0005EC615C28EED6E9FE7F4F3A5137F18A9F3
-:1004C000B4DEFA4A269B5D407EB49EF35A6D242723
-:1004D0003BF84F37FBDD096739E61E4C57383BB810
-:1004E000BCE3FE19181E299BE410B03EF0D01F4B50
-:1004F0001C0E1CFF980D22C477A6C87DA7BE4079AC
-:10050000B41F882E8FB1ECC07483CCF7998E3D9ABE
-:10051000EF20BB6C49394464E45BC7DEEA5F477196
-:1005200097DA02D424C7A1BAB336F6FCB1128C3DD7
-:1005300029D8EEC603DED456CC2FBA27568E1D7BA3
-:10054000EBC70EB207A4856E3FC515E13CA7BE8080
-:10055000F9C5CD0EBE9FB5E4FEF8FE62F5E06C5322
-:10056000DEC6EBC39F179AFAF048184972E685DA9F
-:1005700066F17E8E791F11F53F23119E587A7028FF
-:1005800079D2DF99EF43A34C7C699C92B8FE92220A
-:10059000B10F2B1F3BEDF068DDD3D971E42705388F
-:1005A000FE895A95D3ACC1866B30F63F60B02F659B
-:1005B00030B697B548FF4FD8CF29CE4111DF385F0D
-:1005C00043F7D448DECE157A8253BEB992F5D13EB8
-:1005D000A006597FF1FBD99F6E43FD248DE2376E53
-:1005E000913DEC6F10EF078DF968511AAD37F3BFED
-:1005F000E73C4D70A53B0E40EFB0941BA5C4DFD780
-:10060000CF70F379FF265B80FBA140ADBB109EA1AC
-:1006100027C7EC26F77941E3BD93C8EE535B76B567
-:1006200092BD526FFB740FC525D44F043DC8D00E48
-:10063000F138352D339EA6F6FD67BA75BA5FBA3E1E
-:10064000D72855A3FAD720F21EE99927AB6CEC37CF
-:100650003DD5FC0B3EAF42FB2E42CAF7A9AA3CF6A1
-:100660009B59713F7CF697C06F7802E51B44DDE72C
-:100670005ED1B4C946FAF8A5B451517155D6BCAA99
-:10068000EE6CCDBE8EE4EE130ACBD1CCDF5CC1F1B3
-:1006900003B98A26113CAF9354A18F9A7AF2B560C0
-:1006A000FD35BC42FAE942D293110F3F94421CAF90
-:1006B00069839667A9FDDC1CA10F82D63882FCD71E
-:1006C000E12AF37DA2E5F634D26FAC7382EEF0A19D
-:1006D0003B3F0FF6B4E41D1CF7A404EC6FAAB14530
-:1006E000FAD3FC8EDB13CBD779834D3E30D01F621B
-:1006F000799E0EEA6334AF025F2ED165B54D5BC9BA
-:100700007EAF7D5E8E0F6997D4F498775ED4865F56
-:1007100093DE5D6353857D73C028A5F398F6194574
-:10072000FCEECB497BB83FF311E47B149775EB13D8
-:100730004D3315845B756FD4BB30BFF9895D3315BC
-:100740007A87272FBCC486F95707FF45940F091FE6
-:10075000A6FC1F9FF848940F0B2FA1FD39F9C4691F
-:100760009127030C11EC6F4FFCEFCC00AEEBB8E916
-:10077000FF043D3C9FE659FDC2205BB47FF1C86099
-:10078000C1378F27897AC773E186AB49FF280CF3FD
-:100790007D18ABDE6B83CDFB0426FEDFF462522BAB
-:1007A000C5095BED202771FF41B3DD4DE67B59485C
-:1007B0007FBFA27A2FE768E9BCCF479147115C9EC3
-:1007C0001FCCE73D370D4EE7FA049FF4A2AEE32DB0
-:1007D00023394F72C01E7BFFADC1DC2F2812FD579D
-:1007E000F756D3683FB2D3859D811B927617BF63BE
-:1007F000B0C9D4ABC4FE64CA6A695065B9339CEC15
-:10080000E697CFF62D65BBB9A29BFB9E83851CBBEB
-:100810002928C689F4D2D4CD7CEF1C0C8A4779B93B
-:10082000396973F47B29274DF81E199C26E0D7B14E
-:100830000F3D251E2768C2A52FC2BBB8137FACF69B
-:10084000175AF7F67FD1BABBEC5399989FB51E8023
-:100850007B051C707E69A8E71F5F63B61B6DCD43E7
-:10086000637AB8E9C5DB3708FEA7A5B3DD0E3F11F3
-:10087000707059E316F1F9E40A530F96036F38C804
-:10088000DE5851DFC6EFAFAD6814EF6D75D29DB184
-:100890002A9ACE32F3C53A33652333C8F488EB6322
-:1008A0007A34CC788358FCE980773C1D77E94F4B4C
-:1008B0008FED4FE3FEBADB87B08917DFD83E041314
-:1008C000C3B383BFC4C1AF831E73CD76458867654C
-:1008D0005DE9F18FDDD171EED71CCFBC77B2E27646
-:1008E000335E558BC5E3154DB9B685459DF5EF6E65
-:1008F000BCD71B1D4FEB6A5A1020F957D352CE714B
-:10090000B52B9EDBFAEB00B65FB6FD010F05531F5A
-:10091000531AB2492FAE7A6C9DC7A0731625E021F9
-:10092000BE792C244F4B747F75D41029461FABA67B
-:100930007F62FFC79FFC5BDDBFE1FCBF9050BF4201
-:10094000785737FDB58EECB73D862B4272FBA81267
-:100950009E4A72F4A6056E3FBD2F58D31CAB4F2D97
-:10096000FBE503D91A077707FAD8589F6AED43EDDC
-:10097000AA1FB5EB64BF57EF93751C066A20524758
-:10098000F38B6F5FD3F8A183E0AAA23ED8775CD740
-:1009900072E4248CF7354D3FFA54F6507AEC1D285A
-:1009A000A1FEA2FC1108F7CA6EF4B2C221B1F7028F
-:1009B0002CF840288BF59BE0130F95BC8FF33AF190
-:1009C000E86B1EA9285A5EDE29CEA91A6FFCF90B26
-:1009D0005AF772F524E907CEAE7A80D62C0925BBEA
-:1009E00045A455F6560FF905AA36D9F5007EAEDABC
-:1009F000FA8BC7E95C05DE76EA74F458B5F5B48382
-:100A0000DE3FAB928C88C47A1678A4919DFBB47CAF
-:100A1000EB47C25FD54B86E9B84FCB7EF5B9A86FDF
-:100A2000402409EB2F7FFA7DF66F55F9DC7E578263
-:100A30007DAA68DCE508BB13EC53E3FB53490F0ABE
-:100A40003EF125EFC3B19D12F4CCEDDABE72D3476F
-:100A50000EA29B13B8211969025E649FD634CA0B9B
-:100A60001CA989F6ADF52AD2FFB09CFD2017DA3F0C
-:100A7000D7101074F1DCD66D640F54BEE3D4A7D345
-:100A8000B8DB6EF100EEFF11C52FF0FD67EBB20D84
-:100A90001CB7D21EC8563915DF2B1FB995F170E966
-:100AA0009BB766B35E07462FDB685E6F2F5AE7E29F
-:100AB0008DB3789D4BC0C77858F933E1CFF85C818E
-:100AC0006989EE1B6F1F22E487136E2E21FAF81C32
-:100AD0007B223FCC11078878DEB7C43B644EB83A1E
-:100AE00035FA9DB93B8708391080D07BF4FE640D40
-:100AF000DAC5C417E4373F9F4AFDACCA55FC4E9592
-:100B0000D71F30E1259D13F11C9A62C59DE6E17E59
-:100B1000BD39A527D9C14E38E5B8BE8CDF69D0C82C
-:100B2000FF1BD58EE17664B33359423BFF4876E232
-:100B30007B84EF99EBC0BFB7200A9F6AB61C617C2B
-:100B400002B4BB527344FE61A243B48B52116E9F38
-:100B5000EDFBD0D19BFC1D99361840F36DFB88F35B
-:100B6000A0676954DFEABFA6D919F32E49CDA31FA8
-:100B7000C5D1B333EEBD133FC3B3065235D2378F61
-:100B80003822535FA471705C8AD75C72BF33E6BDB4
-:100B9000B04E7C71747ECFEDA44FCBBE5A6AD27F2B
-:100BA000FCFAE3F9C19371FC0036667DA5F79FAAB4
-:100BB000ECA1C7093E5548AF01A657417FA8A347FE
-:100BC00006203D7CFCD44BFBBF4F7EBA467BE674CF
-:100BD0001E2D96CF563E83F44BFE348477924E7C86
-:100BE000F64B07E9BD39156807E3BC3F76EB74297E
-:100BF000AD2BDDE2F78474EB063ED7FABFC55F97F5
-:100C000076C35FF7C5C1F373284AA53B0CC79F5C49
-:100C10007E09FB15E2E06BD9BBF17CB37A88C67024
-:100C20008EE79BF8B71FA2E0B8ECBF3F61BCFDA206
-:100C3000973807AB7EF4AF2CBF10AC1127E26D756F
-:100C4000E853CEAF23F9C5F95D33E9BCBAEBBA631B
-:100C5000E1195FBEC1E4471DF7DCEE8400C5DD4548
-:100C600076C8FC0E433BCEA58EF4F3A772F99C70B8
-:100C70009DA9EFB7AB110FE9E7EBD2AC3CDC40EF3D
-:100C8000C1B4074AD400B54F32E30FBC114F5A9498
-:100C90009EF47E8BEC21BD2E1C826989DF050CF24F
-:100CA0003CC2D05DF91A715F4B3EBB2D6CDAF54E3C
-:100CB0001C2FBCE6CB6D746E7E4871F1B9E5A23590
-:100CC000733C7CFFAF25FF3F092F16BF8A70247A43
-:100CD0000A188E5E08E71B0508D0FC08F079B09C66
-:100CE00052B6E745ACB704014CE724F1FE9465E049
-:100CF0004D6DCDEDEA374139E820F9BF14E511FB20
-:100D0000BD37C6962F6BF998F16C591C9EF908CF28
-:100D10007A75C5B3DC4B4DFF4A29949AE7BA6CCF7C
-:100D2000B7EF95F93CFF940B58DFA0735EDC3138C8
-:100D3000D522F3FE9C7A4A0A71BC61204BBCDF8A43
-:100D4000F84E7A968587F1F67D7C7AE2D97747D29C
-:100D50003DB1AA5FFFA5E4BF303DF1EBB707BE4848
-:100D6000F9E7FEDCFF2FD0B57EC5CEBFB21DD3BEE6
-:100D7000D3C9FED0F69DBFED4F72B9FD05A74EF861
-:100D8000DB7EA753C435EC4CE177CCDAFB09BF5DC1
-:100D900070C7972561965B6B791FA75FEAE0FD3E00
-:100DA000D5F2379623A75A9C1AADA366670FF68F24
-:100DB000D5BC901422FF40FB8E2F4746BF77F5CF5E
-:100DC000AEA7DABC4FD39E0273296EA63D4DC4591F
-:100DD000D6BC38E6176BC81E69DAE520FF7FC56F01
-:100DE000FE5E427CA9FD995D0EE25B68973E02883B
-:100DF0001F732EFDE903F65E745F0CD8DE3E7DE9BD
-:100E00003BB3E87DACAE701170684738D0BA102E95
-:100E100095A49775078FEA6F2D3C3E657BA2AA6566
-:100E200014D351275C24437C4F09B9245AFFF31E85
-:100E3000F21BB5E7A1FCD769DD5F9690FE74A17542
-:100E4000FFC7A5E27DEEFFE7D76D838B5AF753DF2F
-:100E5000DA750BFC1F76A926DEA78AA383AE78FE7F
-:100E6000DC0F38BF2D45E7F97E45FA7FFD5BBBFE01
-:100E7000AFBCEF25E4B7BDD87DFFF85BBBEE0BED53
-:100E8000FBABE6BEA7A874BFAE7DC7DFFBF37ABF9E
-:100E9000E2BA938BBEADFCEDFCEBEED08F64AF8B72
-:100EA0009ED8BA075ADB344CD775A3A78C2AB2FC5C
-:100EB00010C21E914D7D631D0C3336915D857A06FF
-:100EC000D901EB3245BE1EF50799EF0F72B00AD477
-:100ED000F7D5C5BBB68A1F54CCDBFF7C23C7B3ACA8
-:100EE000CBFE0EE495D17985F06304D7E8BE5DD8DA
-:100EF0003E9866D3823A3D57B5D2B709CBD5DEB21C
-:100F00004AF6CD3AED6A57F43B168ADB1163A7B86F
-:100F1000E3EC8DE402478C5D9204BB55F2C327E9F4
-:100F20000AC7FF3921AA3DD6CF2A12EFF42743285A
-:100F3000A0BA2F1E4E8BBE3E9C5C7CAF5235E104A6
-:100F40008641EB766A0AEB610AA0FD28D621EC4EB9
-:100F500084A316054730ED50C504B9A20D6338A22D
-:100F600001A14D1A4D70F5331C83BD6495E1DAD9AA
-:100F70001FAF3B7E1FD6699320CFD4C725FD9B872B
-:100F8000F3D822111F100F672BCDF795AF21FD77F6
-:100F9000D51A71CEF5CCEFBEC3F9263BEAC374CFA8
-:100FA00030D5B7A288FC8E5E43223A5D3543BC2F14
-:100FB0005846F7C032C9D41771B899AEBEA0B0BFB9
-:100FC00012ED0CF657AA40F69F3C091AD91FE855B6
-:100FD000E2E27A558E7B0ADE2CE29EA01034F14EBE
-:100FE0004B6CFC4F601214525CC314B9AA81E675B5
-:100FF0000A521A28EED2616FEDCFFEE17E008F918A
-:10100000BFA5FC8B8D549E8B7A3DD07D32A5F53DDE
-:101010008A6FB84D4E058EAB8AE0A728B85D76C6BC
-:10102000054A149CCB212D267FA2DFE126B213F2C4
-:10103000024E9582C72A5CBD62DA9FE87586C70BAF
-:101040003A5D2AD94753D4DC98F6B267EF7B64D770
-:10105000BC916E63BBE0F29CC131EDAFFAE0C4C657
-:101060000526CED23ABEF7AEB8A78AF6D623AF632E
-:10107000BB37EF0720BFF1155A694CBB66D3BF12CF
-:101080009962E7F766AE2C1C13336E737837C3A5ED
-:101090002A0B243A0FAEB2214960BDEFEAE531F5E3
-:1010A000BE37FA8A987E67183362F255ABBF0025C7
-:1010B0000360DCEAB340EF0796B636C6B41FBEB78E
-:1010C00039A6BEE7753485302DDDA705291D75507D
-:1010D000DC231D8EFB41E71BCDE1853AC5EB14D324
-:1010E00005D0323A16F0565018F2C8A3FE9728BD24
-:1010F00050FC3298EFB2269BE7AFEB6DA1C605B965
-:1011000014FFD3F0E35D12C743EE263C1D1D69A812
-:1011100048C5EA63CF34BE446953DBF87A7AC7B373
-:101120000AA08DE5AFDBC6E70253E4961289ED9F76
-:101130001EC39D51E72EDDBDD7F9A3D2F27D4548F0
-:10114000476B738C865DC4F727BD3B5FCEEB5A0FB0
-:101150005425128DE73F2AF51EA6384D2B4E2AB98D
-:101160004216BF4771B98893A9B3E94926F362FDD6
-:10117000409D6AE738FE65C582BF8D6CDBDCE82EDA
-:1011800023BBD3A5D1BE2667C4DEF3BE71B4B8B706
-:10119000F7459179BEA2A859D7931FBC3845B4270B
-:1011A0001F1F8D37DDC6FA94E780BEC78EF9FB0A94
-:1011B000F7A9C4CE9AA67F10E0F74D0FB44D903436
-:1011C000809EF794DAC80E87BD76FE7D99A6C2C9C7
-:1011D000A70BA87CFA5B1CC3B86BC22F0B49BEAD32
-:1011E0001C3CE4BCEF8C7ACE48A045C5412C2BD6E4
-:1011F000783E1E25CCEF1279CE285CEE99A7DBFA5B
-:10120000478DB77282D0FF560E4EDE4A78EB3960BA
-:1012100088B8A842B73680E9239CC37C4209E75CC2
-:101220009F22E2ABB4F3BCF37F7CCB88349263198A
-:10123000E57A1AF94133B6CA1DF7CE683D3FA6FFDD
-:10124000D0C13AACDF3F19E7B58562D744792BF2BC
-:101250002458EFB0CA9125613E43B2CAD7CF9E5CF5
-:10126000C4EF31C6D41F9AD751DF70E574F6AF15BD
-:10127000AFDFBFB688E037CA467125EB7F67E777F7
-:1012800006709DAC4FAC447A06E97CF0EC710178B5
-:101290007AB8FC90A4C5BD9FDB5A4CF982BEBE4112
-:1012A000C558FF92B3A9FC0EC067F5492CFF2E3933
-:1012B000FB3D7EAFB3C961F4BF9DFD37491C6F365E
-:1012C000E3E68F37AC26BABEEA7821C52858EF5737
-:1012D000D6A85F303FB0E2EC3AE187F88B78FF6345
-:1012E0005B679EF883A7139E06BDCFB53E0ABEF48A
-:1012F0009B2F334C78FA8A37CE5E8BFD6B8BA6E53D
-:10130000105D9E0637C7F59D561F9F4DF33DBDC529
-:10131000CE41B44D26BF0C149AEF11648673E85E7B
-:101320007EF19B368E473A88F860203EE4B7BE993E
-:101330005E4CED3295748A6F383DFECFFC6EC2E98B
-:101340001F0207172F0B3B185E4D998B2ACA19FFF6
-:10135000B574F23F58F06D34FB79B8D4B8B298FD4B
-:101360005CE67D1163EC45BD3FB96BC2977C2EB046
-:101370003617F5FC340A393E5347EF4BAECCB5B3C4
-:101380005C5A99F6C5D44CC2F7725784DE81A859CD
-:10139000FD19C317BBC98DBE07A69C91418B8ADF7F
-:1013A000D2868AFD571483F75F39E3E0F2AAD5A706
-:1013B000996F5BED4F98E7ABF42E23DD17AAFA8700
-:1013C000CCF746911FD64BC328DDED5819C54FA069
-:1013D000F1D30E3E3F14F7EABEE96F25939F728664
-:1013E000A4CEA2F9B56C3B339BE2056624A9B328D1
-:1013F000DEA06EDBFBB329BE60463F7516C517DC69
-:10140000573C790E97F7521FB0A1FC7AB964BEC859
-:10141000E7AA7FA2FC535BEF98C3F553C4BEDFB6C7
-:1014200075CE9C00F36337D3C1A9FA1E21E779E892
-:1014300060E9EA1721FA3DDB2EE5E6EF49C15CC120
-:10144000F73EB9BB0FBFDB09056D1C2FB6BE58F8C0
-:10145000FB3BCF5741A5F3D5CC7C30C8DF9CF95C72
-:1014600092F85DA2436DFD097E4736DEF203F2A7D6
-:10147000AE9080DFD1AF026D24D1D5425BF83D4AFA
-:101480005F1CEEBBB798F5A9368E775DBA7A27CF89
-:10149000EF53DD8C5B562345DEAFF54E04F69FF02F
-:1014A0009D88D838E30F6CDA40EA5731E1B2506ECC
-:1014B0009BEF10F37A94E6B5227D17C7392B6A5B50
-:1014C000B64FE851856C3FE524F37BD175BDDF292C
-:1014D00049F43B088DB528EF91E49EA96DE674F5BB
-:1014E00050607CEBA9841D3AF6537D40C89D916DF8
-:1014F0001F38A2E319779BF04D357FEF2A3E1E7708
-:1015000037C9A5A8B88315BD5BFB927E68ED6BE774
-:10151000BEB4F635F70568BE99192F3D45EF9D50CD
-:101520009CEB0FE93CE3B9A456F25B778F27D63EDC
-:10153000887937250BBE11793689F5A6F8751C34E4
-:10154000E76DAD2762CADFEED61131E5EBBF6A1D4C
-:101550001193BFC7AFC7A26FEBBB45DF5DDB8BF954
-:101560005F3CDE897B6D17C23B8BFF5483AF50DC41
-:101570009716FCC682B7354F0B6E4DDDC4E32AAB20
-:101580009F8F598FD236898C1E482D11EF5F298D80
-:101590005700ED87B2BA85EB75B71E39E5333EC704
-:1015A00059A6819FF4DEF875554123B7EBBAAE0812
-:1015B000F3E3159AE0C75DE3F823CC9FABD13E235C
-:1015C0007DDC5A77079FC6F5137D4F4086C37C9319
-:1015D000EE124A645FF862F4E372BA31117D6EE58F
-:1015E000BA39263F45BD3DA6FEE5396B62CAAFD08C
-:1015F000EE8E29BFB2F0DE98FC77F59FC6E9F79B27
-:10160000E2F4FB2762CAC787DB58FF7EA3761AC7BE
-:10161000A74F3C1A613DBCB556E5FCEEDA1C4E5FA7
-:10162000AED598FEF7D41672BAB756E7EFBFAB1D2A
-:10163000CDE9EBB506A76DB55E4EE3F946595BB84B
-:101640008CFCFBA33353F93C6AE350DFF525140708
-:10165000B92F5244F837F640E34B240AF2439FBEB9
-:1016600047F54EAB0E8E475CBB6BCC1F6EC17CC684
-:10167000EB322469E7D38B6430A2F0C7333D0C749E
-:10168000FEED01F13E567CFD8525424F9E0B61F13A
-:101690009EC06A3E0187B92EF5152393C54684EC9A
-:1016A000F6B9E0673DD4B65ABC5333177428237B90
-:1016B000D607FE7B381E29F67D01AF3163DDAFB062
-:1016C0007C36DD3BC5F6DF7737F2BDF267F6A64F15
-:1016D0002EC5EFD77A25FE9D8F033BEFBAD5C5F611
-:1016E000AF75FFF41DDBC5E8130B4B047DB54B7ADA
-:1016F0001BCD379026DE2F8A6F37CA5CE755C108AD
-:10170000EB1F11D43F28DECCA2CB19EA2173FD9A3E
-:101710002D750CD1C71ABEDF50D5A6E94184F798C4
-:1017200043822E46205DD0BE8D3D2AE86024D20142
-:10173000CB41D33EB4E800EDA997A8FDA983A03B17
-:10174000B17DDDC41FC9647F8DF92C14A4F4B2B33C
-:10175000915DE7B07C5C9BF8DDA40BD993965EDAD3
-:10176000523B97F16867AD8FD3D6DA4A133FFD9CA1
-:101770007FB97635E7F7D40638DD5B5B6FE2670348
-:1017800097BF5EBB81F36FD4864C3CDDC2DF3592E0
-:1017900067089FBB4B4C39ED2A37ED0A917A8D359E
-:1017A00076BEE78F9F889FCCA5B9127E544A21E26E
-:1017B000DF75E9013BE5EB92690F68D601AE7F9DCD
-:1017C0001B5A490E54E5BC28F4B0383C29CFBC86DE
-:1017D000F164A619C77A20BDEE5607E2C389C6FB9D
-:1017E000ECB1EF8D5E1C5E2C73AFE57B7DF17CF17F
-:1017F000267A8F42EECA0F0174BDAC4CDCEFA238E2
-:10180000BDAFCAEF555B9B795F4CDC7FA9EEEBE681
-:1018100038DB7F9D9C514D39030BA87E87FD9D7C55
-:10182000703EBD8FD7052E71F6F7E141627F2DFB2B
-:101830001BF54CF64BB58764B6BF2A731B3C6C7F17
-:101840008F8E78683F6FDA2103EB8B8A38EF5D4A21
-:101850001D6914D7D3BA7F1CCB99557B882F2D33A4
-:10186000CF7BE3CF6DABE9BC574A04EF30C7D52F30
-:1018700037CF7BE3D75D3DFE089FF7565FE05EE91B
-:101880007B25B1BFE7137F7FB73B7CA17882E8F768
-:101890005C4F9EAD653BEDC8B63B1E0AF4FDD7ED2F
-:1018A000DFADA5DECF4A441C35DF9BB3F6B3CEFCDB
-:1018B0005DCEBA492EBEC7D03E42E5F76FDA25F1BC
-:1018C000FE4EFB5F415FA3D1FB3AEACB24172ED338
-:1018D0001DCC574787C57B01E3E95E6282F702268C
-:1018E0001C0A0553A8DDC100FBA3C6ECF305E9DE25
-:1018F000EDA8D70D99C8ABF465AF4C7860C9274BFC
-:101900005E75D295796F8E6232F2BF3AFD698B4671
-:10191000E7907ED761B7BAA7F23B45A75B81A349A1
-:101920002DBFD8F083864CF712461CF20549DED64F
-:101930009976E6A813013915BF4FF8CCCF76D018A9
-:10194000B453E552718FDA8882AFE5D7B2F89CC5FF
-:10195000D7AC7B7BAAC3B785FCCFF04212BFFF1286
-:101960003FEF41436DD67BD6838612DF33EFE94DDF
-:1019700091CFEE3A4776419B8817B8E46CFBE3645D
-:10198000F7AC7AB607DF53BB907D50A39E4EA89F5D
-:101990005A698D4D9CA30CABD08693BD497A2BD947
-:1019A000A1965D1A5FBFAC74D2D8A15934AFF16D66
-:1019B00006E1B76A3B2F7ED7ACFEF4BC76A1357E3C
-:1019C000CD8E11EAC228BFD5EAA19219C7F2F5DE81
-:1019D000A19E10991B23C7BEED7A1FD26119E11792
-:1019E000D98624A7BE4F3B80EBB80E5A595FB9DEAB
-:1019F000FC1D8B1B001CD1F7646F0483F9C39F741B
-:101A00005F0DE1CD6288CCA77C8D14A97A1141F8D5
-:101A1000C9C4716AAED6555E5FAC7C4E36EFC1C6A6
-:101A2000C3FD4E136F2DFEDFEDFEC4F1FFF65295A0
-:101A3000EF41B73F3BCE46E738EDBF97F9FD54ACD9
-:101A4000C87C25384CDC3B1D3ECF7C8704F9CA009E
-:101A5000BD2B5F393D7ECE64F61FD1C106C59F2ADE
-:101A60007AE1F551F7CD82E6EFBA6CC194E22553E5
-:101A7000E78595E8F3B39F9AF32FBF7632903D74D4
-:101A8000952AECCEAB5C90798678E1D9D345B390BA
-:101A9000415C45FAEC707E87FD618273C73B20C4D0
-:101AA0008F2EC17D7B5F9CF3C14D12FB4B9B9B44F2
-:101AB000BE78711AAFEBABEE23F6DCA304D7BFB848
-:101AC000491946F43D343D924774593CE6ED74099A
-:101AD000E75562DEC7C269D743D4EF5BBD6BAEE3A7
-:101AE000F3A1C6369ADFD0F4B6F5F7917EF9AC0DC6
-:101AF000C86F7864CCED4B204A2E7B4A27FD8AEADA
-:101B00006D97CC77EA7688DF33C016D9D1FEAD3F2A
-:101B1000E915CF53BD56D3CF00AB9EE77BFC3354C2
-:101B2000B1073039CBFC3DC948FF44BF2F649D67E6
-:101B30000D25580AFF23BF2BB6DDF44FBE39F483C1
-:101B400039E45F84D6481ECDE34892B847ED29F5C5
-:101B5000FD8EF8CC50F2F3D23A7E26FC0347D2FC3D
-:101B60007C8FE46DE4CF747EFC975A17A7EFA27DBB
-:101B700044E9FFA07D44E9FB681F51FA21DA47944C
-:101B80002E3E839DE2FECDD08DB799BF76B38EEE0B
-:101B9000F94BC0D4EF13FF4ED35B26FC4B9A0EDDFE
-:101BA000D983F0A059E6F8E8E26715D64F4FB68C16
-:101BB0008AF95D52A4D7C3B4BE92E63FFE84EE59C3
-:101BC000973429AAA4D1BDECD3D91C7F18373F8202
-:101BD000039D37447638C4EF2999F3DD9ED6B69E2F
-:101BE000DA6F7F368F6648E738020F773813FEDEEC
-:101BF000B0156FF7C450A17F7DCF19298B3E7F8C24
-:101C00008F4F633FF018C2E7823FD03881BD320C5E
-:101C100060BC8CF56FF4D3C53D042B2DDEE1E038BC
-:101C2000E5ED3BF65F7D25F6F77F00222F54BD00E2
-:101C3000800000001F8B080000000000000BCD7D1D
-:101C40000B7854D5B5F09A39F34A32934CC2000957
-:101C5000123809AF00018664121212E024048A8A45
-:101C60007482D482A28EB462541E23D29ADED23FF2
-:101C700027244012830605CA558401C1C7FDFCAE66
-:101C8000D102175BF44E50A9F6B73422E2A354C731
-:101C900047552C4A8A62EBAD2DFF5A6B9F939933BF
-:101CA0004C0222FC97F0E9CE3E7B9FFD58EFC73EE9
-:101CB0003BB3265E5E24C900A7E9670A80CBDB1729
-:101CC000A008604CE9D70FDCEFC1F2599BDB0400A0
-:101CD000F360DB3437F6BBCED1F1A21BEBD7BBDF11
-:101CE0009B968EF51B334D07A8BC49CE999E812546
-:101CF0004088DFFF515EC5810CACCDF456DB024E4F
-:101D0000800A9000F2807F4EE37F531D29008E6889
-:101D10007D9ABB8FA1FEBDCCCB0CFD2F978718DA27
-:101D2000AFCC1B6D68D7E79DE92D34F41B97D19597
-:101D30001B74D23EBEBAA71CF70326080FA37DED85
-:101D4000FEF2EDDBB19C35719E8FF67F0CDAAE1999
-:101D50008D1BFDA4A479E3FDF4B245B165F503B88C
-:101D6000857EC7F6E3103E5286ED926BF9813BF11A
-:101D7000BDDB322590BC00359BADEF4762D6B10488
-:101D8000FC6961EC77DB0EE37380882DEC03B83DD2
-:101D9000E00CB62000173D81ED0E433B8FBB78AFC2
-:101DA000CD4DED4BC0126DCF01A83D9AF3E40B3140
-:101DB000E38DCBE8BCEF7E1C6FDC9E39EE065CDF6A
-:101DC00093A55F0F90719FE55E97E723040D4C800C
-:101DD00009A711E42039CD80FD4EBD2485245CD7B0
-:101DE00034E99BD4483E3EAF423C67E17B26F90F85
-:101DF00065D8AEBE2CC14E1CE76F75F2932F5869A3
-:101E00007CB8D19F1FA50B80950C5FBD7CAB0E7F6E
-:101E10001D01F0C73A07977FAA7373F96E5D269785
-:101E2000EFD5C95C7E5097C7E5AC431068C7F1FE9B
-:101E3000FCF7F1007D681C15A06FB41C67F39A07CE
-:101E4000E03ABA7E2F85B6E37EBF289F9006B4CED7
-:101E50006F70FE620D0F4802D5448CA5F8DF8FB776
-:101E6000BD98E5E3E7AA0BA75AF27709141C77B9E6
-:101E7000D724C65DD4F1629627DA0ECBDF33F48720
-:101E800015A603867A638EB1DE5A7120F67D1D0E8B
-:101E9000F1E52D9BEFB0055C58AE372921E799EDB0
-:101EA000FA7AA6ED4F524C389E659F3D64C7FD2DD2
-:101EB000712BA0607F0B80D29E7FE67B00F50CE744
-:101EC000791204DB138C5B47E312BDEF4F02E93C50
-:101ED000C67D0B6983D6A3FE973DB413DF7B2B4DE4
-:101EE000017FCC3C2DDAF89FA5B7FDE22BECF7D9AA
-:101EF00033404FB00E73693D63777D6C3663392E86
-:101F000059D0C95877C49C81E5899A7F6C3CE261BD
-:101F100032F59B26637B6ED71107A2FCBEF6AB366B
-:101F200039106F6F9BCD00034020BE04FBE31854B3
-:101F30007FD07BD5DC46FCFDCAFD4961F379ECE737
-:101F400041E445A6A34AC1EF3710DD88791440511A
-:101F5000B37415E8F32A241F68FF547FADDDFFE654
-:101F60007AA233E8DA48F2E13840B885D7AFA4C6A0
-:101F7000F2FFD2677FC2FCB9280BF99E04E066C16C
-:101F8000BF0EFC773A97F83534DD89EBBD358CFC14
-:101F90000F179FFF9FF13AA37C3E22219F1FBA1289
-:101FA000EB4B9F91BC766C3EB96F98E0278DEF7537
-:101FB0003ED7E1B87493C47CA9D73FDF27CD08256D
-:101FC00080F7368D2E86285DB369BE65CF5AA00591
-:101FD000D7B76CD288FEB1E3C7BFB7B44902396640
-:101FE000FC279FB3D710BFC8D0D5AF1AF967DCB3B1
-:101FF000A7322AF24559CFF868D3E44DD720FF180D
-:1020000094D726FF9F7E8EF301E27127C2A7327319
-:102010006E36CD3FDB094ACB7806CB1C07CA89ABAD
-:102020000588E0EA92EBB201E1B919D12521DDCDB5
-:1020300051AA5FBF0EF1F80373E02A92F3C7BC43C5
-:1020400078FC6B5CCBAD606672CD36E17873E7D817
-:102050000B693FB31A045DBF9EDE759C9EBF3E298F
-:10206000C5D480EFBD6E8246C888EEE375AB3F9B5A
-:10207000E80D37EEFE08F163524649A7537A9617EA
-:1020800044C91FE97894A2F26F9AE454699E936E52
-:1020900033D3BD25ABD546EBBA154207149C7789DF
-:1020A000376C23F9773BB82D5462D1D54D1F447F4F
-:1020B000E5FFE8388DEF2FE9944226ECDF5ED70E7E
-:1020C00016C4EFD3757BB91CFCCDE0C6CB101ECB7C
-:1020D000C7DBBC2DA4B734FA32AB26389D405F9DD8
-:1020E000499F96683BAEBBC2E10C4BA9F4D87A3C41
-:1020F000761D8DD94ACA78DC8FBAA63C9DE99368D3
-:102100006170749FE36C004E92F33B5358CE1F7B7B
-:10211000AED84C783AF63B6BC844F52D23DEB8D3E5
-:10212000C7752079732CC36BB6517B466E48C5F6D4
-:102130005BCCA0925C86ED426E3D3FE9AE77488E67
-:102140002DDFE932D94D828E653401A447D7BEF325
-:10215000EF38CEADC8AC766F546F2C9AF2E8C62734
-:10216000900E1699DBEE29C767A7203CD68DF0FCB0
-:102170008BA97D38E9ED8F1FB287CDF4DEC323B77D
-:102180004B38FECBA98191B41FC854FAE7E0F39A0B
-:10219000437DA105DF9FFAE83F0F92DEBCF5C9BE83
-:1021A000CC5F3ADD4F233EC4F59C403EA4F59CDC59
-:1021B0003784F92E8A7F0187C5280FC8246ADEB1CB
-:1021C000CE4FF80C24CBFCDC02AA7219E17BEF4D58
-:1021D00040765381645288CEBB9A115EA633E9499A
-:1021E000196FE6F7169951BF121D06E44282C7091E
-:1021F000935CA0F105D07ADE7F6EE4F6167C7FAEAC
-:10220000D63F4A774797FC86E86EB3DD6BC7251C3F
-:102210004F32EA7DBD9C393E9DF9E516C79760298E
-:102220008C3E5F52FBB5B19E0F0AC98D8206B9F094
-:102230000E2CEFD4E07EC548FFF7C7E3FBB7B5AF80
-:10224000DBF38A4CF36EFEE9DB34EF4B4E9E175EF8
-:1022500011F03B6112FAA55BBF3AFECAE3A3E4E1C9
-:10226000F5EACF3F7EE88DB1011CFFE3DDA38703D4
-:10227000D2DD02A9F3A307115F9FBB3ADFF93996BC
-:102280004FBF74A81FC12F7EBD8B6ABF004B8C1C33
-:102290003A6E32F17E17D13EF0F96F0AFD3733BE48
-:1022A0002DA827106E0B5AC66C2779304DCA4F23C4
-:1022B000BBE9C431E3FAE2D7A98FAFAF4F1F5FEF9D
-:1022C000B78CE08F709838CE2DF4ABADF373C2EFBE
-:1022D000677B469B9015A3CF333AC7A6E747F1E447
-:1022E00057EAADD4EF1A12F5888AB90E81D7B935FD
-:1022F000A650430EF7E3F6EBF039E1BDC2D3C0F5CB
-:10230000394ED467D87F51E66F785D24E81CA8D792
-:102310007E00FA4FF5AA5F61BF3797A5B25C987B44
-:102320004B9B95ECDC6E79A6BE6D3E3DFADBCB3364
-:10233000849EECEE07CCC3A43F013767C1FA24ADFD
-:102340006E2AF963C3AF483EDF99EA95D064841AD8
-:1023500019C2C4D7272144F05E6D0AB2BDE7203D03
-:1023600080658BC99B69C1523277F5019E27C47085
-:102370009A06010BD57F6B8A3400BEB7CA539949C0
-:10238000F4FF2638FD6417FD207DF51892A395EE25
-:102390009973E9F96C35D5DD82FB6DB4CA77E793A3
-:1023A000FDF303C94B76AF0E175D7FCCB578AD0456
-:1023B000DF7E41D9AB22FD16BEA2384C0C7F874A86
-:1023C000E3BE6109F6A575BDE55C3FC664263B2DFD
-:1023D000E41A839B7DFBD07F14FD1EDFFF2328932F
-:1023E000C81E98F35B07CBF19B40667EFF11282C3B
-:1023F000C76F8600D76F8188F54B7CEFDDD2FFD9A0
-:10240000B91FA2FB7A77E257BBC9AE9F2BB5F7CDB8
-:10241000C176B512F248CFFCDAF17FB646701D4A9C
-:10242000830592D0BEFA35D129D9EF475DA19DD859
-:10243000EFAEE42DA91D588F9884FDA556069FA4E4
-:10244000FEAA19FC0D58F64D0E3C4F7CF8CB14310A
-:102450004EADC5E126F94806168DF3D13B2EA67781
-:10246000D2BB3761BD0CB145F03AD157D09BFA577A
-:1024700060B97BC2EAED5468DC53B27727BD3AD528
-:10248000CCEFC36999D75116A75F7CA3CDFC3EFC66
-:1024900043E6F72775590CFAC537CE1C7C1AF73777
-:1024A000E5EF965EF5CECD05827F7C7DCCC144F60E
-:1024B000E0FF68FC851092683D0D7B4DA116264219
-:1024C000611F94E9F40891D5446FE50041A27BD8DF
-:1024D0008B7A4C9F2797F7FFB9EA233AC476B60761
-:1024E000DB9F2739690F0A3EC1FA54DA8F23085E51
-:1024F000B2D750218305EB49F8A290BB6E203BB6C2
-:10250000A502DAA93E092212E17B0A417A08F9C341
-:1025100032D3ED5450B8AED3F1F740E5F272087102
-:1025200079258485BE07B9F1299CFFAA4F40EC6745
-:102530005498E91D1D19F747686FC0E5B798C9EEB3
-:10254000F0FD30B1BF30A840870B22C473EE709904
-:102550000E814C31BF80879D9EFBA2F070C4C123C9
-:1025600089E0E18DC203E710F03803BE023E931408
-:10257000840FCAA7C9D025D13C8A66DF548297CB85
-:102580002AF073D90B5C5EA8F79C09979248C01299
-:10259000C84F009FA989E96684069F3F1600CB2F8C
-:1025A0005DFE5C5B20F3735D0E217F66923D1A2F0A
-:1025B0009FF4E7BE94CA2F64A487AA82AC7916D48C
-:1025C00067BEC2CA3B8760FDEAA7F344BDACF257C1
-:1025D000B958FF41C128511F5759684578D59B46C6
-:1025E000CFABC2FA90806923F1E5F27AB4AB715FA8
-:1025F00081A47B8244C7A60C709BB03D505FE42D44
-:10260000C07A00E912106E7629A79EE06CFF397837
-:102610001B7015196981C905B8DEFCF99DAB053E33
-:102620002BFBCFC5FEC73BAD6CB7ACB10583842790
-:102630006477777D69747FC79FFE790D3D7F7A004F
-:10264000B849BF80472EF4BBCE5C8FD9015C5F8C4C
-:102650007283E21F38DF4C9A2F80EA49A6753D2528
-:102660008508FECBEBA7B13F7024CFFFFD82BE31C2
-:10267000E3E33EA4F134AFD073E0C92924B8958CCC
-:10268000F45F4BFD4EB850BEA651BBC0434F6563CF
-:10269000813297E68D7F6E4EF9E6862538CF52A4BB
-:1026A0001192D38B0B0237D2B84BCD914185F86C88
-:1026B00065CA3B36A60B05E993E403F12BEDB7069B
-:1026C000E991E87ABFE057E40077B7FD8AF8F5F8BA
-:1026D000BB6E58E813224EC2FF15CF0D3E8F6635F4
-:1026E0008D7F3BAD63A9D4B590E8F2F3F4D76C7F4E
-:1026F00066BE1C28E84E935B4B9FFB9AF9E7593363
-:102700000425CD3F8618BE5BFA5C9285FCC3A59F6D
-:10271000422805DF2FDBF77803F93BA5E8FF939FFD
-:10272000BC78D753CC6FFB485F22E896FEF7B3CF57
-:102730003F487C7A6512C7A126BD767408D94153FB
-:102740008E461A106D70E2D9372E13F4AFFB257F39
-:10275000339D8F1E9F26ADB887F0BD0CF16FC7F972
-:10276000969982A26E75B855967BC24FAED1F6F19E
-:1027700019746E9CCF72453D504AFBC99480E56345
-:1027800048F81332FE23FEBFFD686835AD13A46F11
-:102790006C246F4EA15F4CFBBAFDB178BFA3EB4038
-:1027A00029F9DDE417E33E17B71BDB97C6EA870478
-:1027B0007EF296022D1E960DD9B4AF5FA33FF4C1F1
-:1027C000309A777E1AD9871329AE90405EEAFE715F
-:1027D00028B9F29102B697DB25E287324BE2FE0B75
-:1027E000F3855FACDBFFCB1E92D88F5BF6509F5119
-:1027F000EC276BFC0A612FF3EF93A45788CE022FCE
-:1028000003D1C12DDA9E60731FA6B95B9B4CECC748
-:10281000D8A53BBCA4F7C73DD2FFB67F63BA4975C4
-:102820004326D527CC7DCCC3F655908435FA556C1C
-:10283000673E99DE954BF33F992E838AF3352475D5
-:10284000E5929C559F757849EFC6AFFBED02E10F0D
-:102850000C098FDF14F1083C139FE7BC54BA89F0D0
-:102860007C12F99CF0B7CC35BC3F38C96E989C19E6
-:10287000C1B241B3D3731E1B95361BE1E2A3F5C66B
-:10288000D8D51DAF5E9342F6F26E8B3FC58DFD4EDF
-:102890001ECE35F841F16551189153D84BFB1B33CF
-:1028A000870412C05D2F7D9B2C0C2F9D6E7F5DA732
-:1028B000C00756C247B9D8876A77DB7D447FA1A994
-:1028C000E44F2EBB19DC2DD87BD9CB0F3738A8DECF
-:1028D0000C4CCD27E97FD4FF137388ECF15FA68CF5
-:1028E000BDB71CEBBB8E59849FA22A87F263EC58BC
-:1028F0007BA6196403BD764A8B491E13DD23BD26D2
-:10290000C9C920C7D0634A5E86A1EEF20E30BC9FD3
-:1029100056926B684F574619DA8BA13612C0F514E0
-:10292000654AEE10AEB8CF8C0243BB1DE93A4CEBC2
-:10293000FC52D85125F84FE8DB20DB4365118007B6
-:10294000900E261E37DA59259136F637930E5B0C1A
-:102950007100FB59E250C9851A7F0D8481C45F481C
-:10296000FF5E9263270F8BB893ACC17359B6D0CF7B
-:10297000CB5E96D80E5C76CCCC7AE22478BBF14361
-:10298000F251E7BB78B8F7F51BE1DC7FAE11AE5929
-:1029900001235C2FAB31C2353B6884EBE05A235CEA
-:1029A0007354231C87344D34F41FD65669A88FD82E
-:1029B0007485A1FFC8D06C437DF463D71AFA8F6980
-:1029C0005F60681FB7F736437B3C5D8D0F2F33B4D4
-:1029D000DB538F305D1D40BA32A13E287CE9DFE237
-:1029E000E8C2C2702F1AE8F48662F0AFE23FC27FFD
-:1029F00099969798006A03F1E385C2FF1584FF94C6
-:102A000028FE75B9DA139FEAF81D42FA9AE565794E
-:102A100084F07EB22485E9E5E04B270F2B40F84F88
-:102A20008502DCEFAC29228E22C9C126A2934E700A
-:102A3000B591FDB9C61264FF4545B3702729E53845
-:102A40007FF3FB25E86FC6ACB35A49024BCC7EC777
-:102A500087DB0DF5C297F61AFA1775860DF5F18723
-:102A600041227D55F0A6F7792A8B3E5438FC55FC5F
-:102A700049F0792A4BBF0CDE45FA37DECFBD5AAD9F
-:102A800097D2C8AFFF7BFBF368D6A07F364825BF3F
-:102A9000377247AAD73400E191FC4E03F9DF807604
-:102AA000B4159511B80FB23E98EF10EFFF2D69F2F3
-:102AB0002AEA6F42FF9CF08E70C9237BAF1692BD4D
-:102AC0000417B25BC80F832B843DBFDAA4B23D9AD2
-:102AD00084F628D9230D157EB697A74370203DBFF5
-:102AE000069455C4779219ED577CFE3F23028D85DD
-:102AF0004562B1443F777D21B3FF3D85FC6906A661
-:102B000002A4F74ED0EFB43E78691EC5E34F902E75
-:102B1000C3F5B7B5BC304F253BC303EE08AE3B2031
-:102B200040069B0B03F7D0B8EF9BDCAB0BF1DD83CA
-:102B300013FF3288EC917585C2EEB34B0829A4814E
-:102B4000FEF315A0E78DD9CA7D8545D1384B4FF4EA
-:102B5000A3C733F5F8E6AEBA309716B75722BA8B4B
-:102B60008F3B46CCEEAAF1A4FF9699D8EFFC0B2D33
-:102B7000AE94E7496539EF804E7B3A2F99FDFFEB24
-:102B800035BC991D9DAB7E8EEFDD1014F6D60293F9
-:102B900097FDF5DB338F731CC52E99C047FE505A45
-:102BA000FE76117FD1E3259749DFC6CE3ADB7E6FF3
-:102BB000CF3C668857C1137D12C6D7A3E3ABACFFE9
-:102BC00062F6B9659347E835F2F3DF6FCEAE84D491
-:102BD00044F37CCEF1ABEB83AF1AF8E2C6DAB70C64
-:102BE0007C7093FA9EA13DE2E9B252BC32B2276BEF
-:102BF0003AC5D73FDB6D2F263C20FE0F16C6C4EB2F
-:102C000022CDA3AB60ECB9ECF72FBC8EA3759D8CE5
-:102C1000577DBFEFD4BDC9F5485D84CBF8FDEAF11F
-:102C200011BD4471D844F6CC5D12CA0BF277495EEF
-:102C30007862E405401ED9FF7749A3BC44EFB6FD96
-:102C4000C147A9BDABDEEEDEEEE3F808C74D6A91E1
-:102C50002EC86E00A7787F81CDC176E81D3EE12F9A
-:102C60001EADF8EA06B25F7320D58B32107FC27FAB
-:102C7000A2B8C97C531AEBFFD55907B8FE61338857
-:102C8000BC514DF821F25797A6A60ABB58C1FE5871
-:102C90003F9161E6FAA11181AF981FF3C39CDF5801
-:102CA000DA5FC4F3C01319447CF833D9FFB5E05799
-:102CB0007780DA6B32D0DF46FAFDC4AC8E35116B0B
-:102CC000ED1A70AD05F1FE49B2FA395934637CFD55
-:102CD000AE253FF3139BE0DF49BB4ECF53113E1FA0
-:102CE0009A24F6CFD5674C1CAF0167C4568D7ED8A9
-:102CF000038303561F8EDF66457BD2299ECF1E13AA
-:102D00008DCB9EB0624971D024513A7DC2EE75F9E7
-:102D1000449E532F4710CCB09CE4D3E57CEB708AE3
-:102D2000BF9DDC6C07925B38BF42FE96FAAC88E32D
-:102D3000F7CBF02F028117F71A5CAF6788FC05F11B
-:102D40009F4742BF16F721FB720CF167726053B1C7
-:102D5000FDFD3DF66D84BFEEF51E16F1B0CF9A472E
-:102D600073BC5BA713D9A7C5BD7F0C20DA2FDB4648
-:102D7000ED8B5F7EFF1D8ACFFDA63030D487ED0B33
-:102D8000CC7231C9C9C5A91D1CA72BF6C93C2FAEF1
-:102D900097F78B72AB117D7158EC88705CEF6CF11A
-:102DA000FB9EF6FFD9CD9D1BF3395E2D8F25B9A271
-:102DB000CF8BEB28A675E8FBD4D7111DA777FED1E2
-:102DC000E3D07AFDE387D60CD7F20837FA13E8E5AB
-:102DD000AB743AB6268EFBD768F88CC74FC18860B3
-:102DE00088E3796E703760FD5A0D4E9FCDC3FD703C
-:102DF0003C44194FF85D3CDBE92538EBE3F7CB8029
-:102E0000C053BDCC73C548FF1CA2BFDB82224FA0BC
-:102E1000B723FD893867730AD3EBE2E7DE7AE7E789
-:102E200038CBAD8F8E2924FDA1BF1F0F6784EF70B3
-:102E30005ACF0249E4CF10BE37D1F8F1F981F385BA
-:102E4000EB89EC4ED60B27B6FD2C44EB3B91056E7F
-:102E500013F2E3E27DBF7DD33496E8C41996B084C3
-:102E60005DC6F857BC9E7243E03A92237694236481
-:102E7000DFD8F5F7065A0CEF55672A77F9D81F55B2
-:102E8000EE2679645785BF362450C1F5E556E1AF8B
-:102E9000EDEA34CBC4DFBB2C10223DBEFCD50C9533
-:102EA000ECC7E56877B0A79317E4F54232FA41E939
-:102EB00009EC069357E6785C5A600DC14BFAD1D401
-:102EC000079FC889FAA3BABE2CD2F4BD927F6303D0
-:102ED0008DEFD3E281686772BCB314029A1DA1C55D
-:102EE000E19A0F701C4297DB3698EBA0F8CF9ABEA0
-:102EF0000B1CE41FCA382CC7D73CB3D3A0173B72B6
-:102F0000551D4ADA11D1BAB5073F5E3F1FC06BECC1
-:102F100047DB0512D6D07AD5814823FEDA3AEB7723
-:102F20005D2F60D932E691C84A6AFBE6B44476A4C4
-:102F300043B303B8E847EB14EFD906AEBEC384FA37
-:102F400033D96B81F763F4A00339FFFD3C6D5EB2AA
-:102F50000732BBDBFF4078EB691F17AB24F8BC6F6F
-:102F6000EDA5DDE6AD49240F12C28BC8C433FD18B0
-:102F7000D16332C4EC9BED9E98BA14072F89CAEE38
-:102F800076E57482FCE577DDD7AABAF0AB1F1AECC0
-:102F90008110AFDF6AF18317E9C9E6C176C3390C46
-:102FA00055CB7F220117C7ECEF1CF64576B955DBF0
-:102FB00097F522EF8BC6F5F7BBA4D7A75EE2EB0B24
-:102FC0005FE2F885EA4B1B7E4AF5A50D3FF5125FDF
-:102FD0005FF812C72FCCBEB4D7A7CCBEB4F1AB5E9E
-:102FE000E2EB0B5FE2F885AB2F6DF829575FDAF063
-:102FF000532FF1F5852F6DFCAA6C073ACB81CFCD0D
-:10300000A6379A4374CE46AA0A73DE3857058E4710
-:10301000A73603E72BB67B851FA5C7E947D2103239
-:10302000FA2D567716D9D1DB1BEFABFC318E732A04
-:1030300013174FF9FCEC230A8DB36D1A70FEC2D939
-:10304000F8D1518A7FE540D81BCEA1B89A04E11887
-:10305000BBF4FA600A8463FC896AA58FA15ED43947
-:10306000C0D0FF964D430CED37B78D36B4FFA8A9FD
-:10307000D050BF492D33F4B7434E4B1EE55D1B2D99
-:103080005ECA8359686FA567C20D76D8F83D05FF03
-:10309000911F9383167DF7B8B88F74D56618D7192A
-:1030A000D77EB67C407C3E614EB1964FE8FE7E41B5
-:1030B000BC0F6E4FC2B8A79E4FD0F139DC92C4F856
-:1030C0005AA78A7CD39A69C28F9C1A729B286FA9CF
-:1030D000E36FB44672FABEB7D519FDC9F446772539
-:1030E000FBA34DC0F9DCDC2A7348C9A138C1C04A32
-:1030F00007E239B443D04708047D841A81F385A1DF
-:10310000AADC95D47E2A047C0A46A78FD1550B678A
-:1031100052DCB53EBB5F16C51972AA043D2CDD6BAF
-:10312000A4034AE7D256D30F4BBCFEF4FA8C02CA72
-:10313000E79D819727049CF5F3E7E97170CFDB6188
-:10314000C44B3CDEBE2D5ED614C77F57F2EDF06255
-:103150009B2177A4519C540599E2322F660F373397
-:103160001C9ABC8C9F19D88DF830A70938DF134FF3
-:103170008FAD7510AE8AE1DF1C6F5821FC4C93F2C5
-:103180002B99CFF0DDFEC0A744195FDB9A44FE16F1
-:10319000CB641A1FF6CA0328AE105267F3BAB737CA
-:1031A000DB92E93CDF57F566A0F3F2DB73E40194B0
-:1031B00017DBFE8C696EECF920A40ABB3993F7612A
-:1031C0003797706911A5A2956011ED6189EA835660
-:1031D00098E3F0A94AD49E3E2339EEB962A2FE5B81
-:1031E0008A73193E694A86015FD61223BF23180FDE
-:1031F000E5A37C1C4CBFCB4457824E42AF4BA195FC
-:103200001C5FE932D510DD68E72DD257CD06CA47DD
-:10321000D567FF742ECBAF7A1BC31D5608BAD0F307
-:1032200082D6264187F1F4E3F21AE9C72A0D3489E0
-:10323000FC96E01F7D1DDB146DDE2C0954967BB6D9
-:1032400001C467D6B8F1EC243C49DE78045F3A61EA
-:1032500036D07BCE123BE7B1413ACAF8B74E00E810
-:1032600013734E217EBD675DE777A4F30FBF239DE7
-:10327000EBF267AD57933F45E25CE429A46B8A1FEC
-:103280004DADEA04FEFE0ADC26A247A4835959C5C7
-:103290007CF4817F76911CB213BCAAD3A8DDD5A99A
-:1032A0004C25FA9D2EBDA2B8709CB587059DA37EC6
-:1032B0007989EAADCD16A0732628674C3FA2794BD9
-:1032C000EDEE952479A481E369DD853E943B1447B6
-:1032D0007CC5282F8A3A8D70CB8D97EB3DC0B127E6
-:1032E0003D110F47D7040D8EC508C721DF1E8E364E
-:1032F000AFD0C3E92542CEBE98FD537ED57D589C04
-:10330000AB495780E1FA852AF4F274E97898E4CB66
-:103310003A05E50BB6CFD0DADD25429EE870CED572
-:10332000E0ACCB9375F32183F8DE4DF2C44970FD18
-:1033300088F5765B9180334084F39FA98AE09335CA
-:1033400056F0529CB6ADD4E9A57861AEA2C1B7499A
-:103350008397094C04DF78BA9421A68EEB4B8DAB92
-:103360007F5BF8964ED0F4643F283E1FF8AE4B4981
-:1033700015FC3654C0C7EA8CF0B9E6A61C8B77253D
-:10338000F275470EC21BDB9B5E17F0FEA5D67FD5FC
-:1033900018E07A53DFD5990CAF9C859944CF4DD670
-:1033A0003695F2584D3AFD69E7C25C9A9C9886FCC6
-:1033B000BD00DF5F8DF289F290A92501078DD794BA
-:1033C0006F0189F7BFD99B68FF0E9FCD20072FABF8
-:1033D00031C235250E8E49DF91FF7F3CE1BBF1FF05
-:1033E00076FA15FBAD1906D0C979C89083E0642B35
-:1033F00099984C74D4D2BA9DEB32849A7271FF0FB3
-:103400003B85FDD5D23ABBD7F351214D2E6CA97324
-:1034100070795F9D9BCBB6BA4C2EEFA993D97E698C
-:10342000ADCBE3B2A5CECB65535D0997ABEA14EE05
-:1034300027ADCDA860395C051CCF5E99F239E7DF76
-:10344000E3E7CB518D7A6C706DB201EE7D6618F5B5
-:1034500055BA62D457748E29B6DDE51D65684FC92B
-:103460002B30D493E48986FE5326047E3981E48090
-:10347000A7324E0F223F8E899EB36B6915DF4BE951
-:10348000F0D3F59353E3F33556EF00CA3B395B05B0
-:103490009F366B765E13C111CB6405F8DC8CEDB002
-:1034A000E40D01F1FF6AA6F38771EEFE488B1DD98A
-:1034B000D7286427B4C8C28EB78238F76BCBF4879D
-:1034C0006BF07912EA2FCAEBDAE6A6B05C78D8E3A3
-:1034D000F4D239DB96D6656E5E8F579CA771E3BF39
-:1034E000447980F8F3358EA1C67339D6B39C6FFC4E
-:1034F000754FF4DA9491508E9C2167BBF32FEF6BDC
-:103500007429F22FF778043CED3DC8A3D6387BD957
-:10351000A9E55F60A02F61FFA83D25F20BAD717199
-:103520007BF4C312E66FDE9A2071FF3F4F9085BF98
-:10353000660903C96B9717DF8FF53B14F17DE8B976
-:10354000CE8F3F3E4F8C7C0A2407FE3C019F2B4FC1
-:10355000083B254916DFA1D84051583E81C887D085
-:10356000591FD237A95ABEA75BCE908888A13BE7E6
-:1035700019FEAEC88BD06716443F96E8FB17C4BF50
-:10358000FDB66523F9C3C37A69A7FC5002B9E02AE6
-:10359000D1BF1F832E4F3180EEBA23FC5C2589E119
-:1035A000172678359AD6CDC8C5E7A95E8B173100A6
-:1035B0001525F25E3A5FB14A4965FDBEAA446E2701
-:1035C000FEF942717A091FADF955ACAC93867DC8FE
-:1035D000A2B7B1C4C676BA8E87246D5E444F679594
-:1035E0000E67ECEFCC9B11ADE37FCD6336725EAF1F
-:1035F000E5AA4738DFD732EB3F38DFB73A6B7A1EA0
-:10360000C9BDA492E9C7F82097861F660DD2237919
-:10361000C6FCDEE9D3A2CE70A0F8849607048F31F1
-:10362000CF6791FD86F92F349E60A0D0436051F89A
-:103630007B8333E95BF0B5DEAF673E50F5EF4E5765
-:10364000D2F9E0268F90A34DE07D3340F55724AFAB
-:103650002AD3F38237E9BCE9EA8116C6CBEACCD992
-:103660004DC28E177E53936725E76DE3F5369DD7E0
-:103670008C95DB745E3356BE37C9B37BD5CB59010D
-:10368000739CDE37BE9F1D34EA1FFDBDA4CC2B5FAB
-:10369000AB8A392FD56CF13B485EACF2DC678AD53A
-:1036A000730F2881052531E793AC99B3F83D7BB6BC
-:1036B0002FE1BAAE50948544DFB8FF5EED81F59AF4
-:1036C0005CDCA8E997B3ED7393D6FF01ADFF66D23A
-:1036D000EB23A2F8193EF4F26496CFEB441C8379F5
-:1036E00020665EA524B082D615C5AB390A17A4D3CF
-:1036F000E1F957B0DDD1B06E7632E169E7FADED795
-:10370000A3E7D5F57E7A1E353EBF6EF3980DF0DF48
-:10371000A3C985175C0B2B1F40D0EC6C13F4D4B0FD
-:103720004EE891E14F887D9C4987C6F5EE6CEBDD54
-:103730000E8AEF4F91C56E3AE17A465C7D405CFFA0
-:10374000DCB8F65171ED0571F58971FD2BE3EA578F
-:10375000C4F59F1D57BF36AEFF82B8F6DBE2DA979D
-:10376000C5D5FFCD884FDFB56989E0188F3FBDDF34
-:10377000B9E2EF5D5FC57EA2A3E13083E945A7B75B
-:1037800073C543D4DEF5339DD94A46B17CDF81F65B
-:1037900015D9433BDB2ADDE27C4760E56E8D3E4870
-:1037A0003F58368879D0CE4AE6F89CD36390236799
-:1037B000C3B709328CEDB17668EE85C7F7D9E93326
-:1037C000A4D917BDAF5BE7E32913FC27490E414895
-:1037D000F899BA5DBB4D15FCB34D5D50B99EE46DD3
-:1037E0009359C49FB5FB50E86E1D11270F684A38E6
-:1037F000C2F18426CD4F68D3E4C95A4D9EDCADF9A1
-:10380000094943839B28EE9B7C988FE740B3AFE048
-:10381000AF0B103FF797166FA3EFC7EE1E53F2F8EA
-:10382000C35877FD5D827021DAE9635B14B259DA1F
-:10383000948C243A4F946272B4939FB8AAB0CD3F4F
-:1038400014FBADDD7FACFD79C4B39C69F3A2CE0758
-:10385000D9D265227A837C2F7F9786EB54C9C6B272
-:103860009677D5253A77BAF60AB7898CB0F419B2AB
-:1038700099CE11F79910E85B8AF018DC046605EB25
-:10388000196A98CFE25C532A0BFFEA196428DE6FAD
-:103890005716C1EBAB66DB7EAAF68C0F90B438DD11
-:1038A0007995FA38698234E887E38EB245ABAB8FFD
-:1038B0006CA6F3D04E49D4A73CF3F8FC95F9D1FAA5
-:1038C00098671E1FB812DB5B0B0799489EA67B52B8
-:1038D00013DE137375A9909FDB9B170E4EE48FE9DF
-:1038E000A53C13383021E76B25D1D4042C876AA579
-:1038F000AC3DCF14F52B35B8C9B55ABB4794177AF0
-:103900009EF8F1E794BA753B7B809F8D6CC877F683
-:1039100033D88B5797F6622FA279CCF1DAAD56796E
-:10392000009D23DCDA6C03BAFF616B3688EF905799
-:10393000D9F8DC2858DC03AE7145D71D5AD56F1E67
-:10394000D14DC80486386EA6065FFB4493768EF28E
-:103950009B307DC7B755CBF36C8588DB9D1F8BE70C
-:103960005FCD27BCEA78DE57FAAFCD449F1DD90B57
-:103970002B37E27BEB1ACD1C3759D798CB744EE32B
-:10398000907D746AC52133D9ADF9D06E263B7F1482
-:103990007D793D84AE400A70D9AEC9E7FFD4FCF80A
-:1039A00061A0F0F341D0C5C0F9B438F01382CB1058
-:1039B000126D12F18FDBE4C07996EC4BAF48A4B7DF
-:1039C000EB4AF5EF7AA1C652ACF91732C3B78EF8BD
-:1039D000281EBE74429FE38E8ABF9EDA9D7B5F0DD8
-:1039E0005F86D5DD6F18E993F0363B46CF6CD4E0A7
-:1039F000E7F6FA15C2E1B5C581167A7FC9A6BF1EE2
-:103A0000207354565533BDFF14E11D9F2F0C07A79B
-:103A1000D33063BCE14AEA3FBA76DB7E8AA7E5058C
-:103A2000EFA8EC8FEB1BAE54577A888694C0FD3418
-:103A3000CED0CE48850BEBCE4DAF86B3783D6379C3
-:103A4000BC5C7D3D480FD54C476E11C7D7F04BF895
-:103A5000A773CB0B370BF8607B16EFCFE2CE8A5DF6
-:103A6000FFB669FDF8BB8578BA68D5E0F758148EC3
-:103A70006035FA358F2582A34EA73A3C6E78A26B4B
-:103A800015E53AE7873A5F2439E8DFE49EC6F2B0ED
-:103A900038F024BDEF6BF337701E7057275D47D4A5
-:103AA0000D1FA7D249D7BB603FE569C2FBD615EF12
-:103AB0005772BC782F88B8589C3ED44BAB129F6786
-:103AC00010F7E58CDB6BB493915E958D9E587A353B
-:103AD00073BE33A4E9935013D22FCDB742D06F48B1
-:103AE0005DE64E44678F687A658746B7FAF3A13D75
-:103AF0009CBB3C54DAED27664A46781EEA8DEFD32C
-:103B0000C0CBFC807C7084FA65101F607DF00A37A2
-:103B1000D3A7CE074BF6FEF500DD67E3F4C905B188
-:103B2000F7D745343C227DBE43EF2FD9D475807C36
-:103B3000C5C12B047D7E4C77871545E90CFDC7F781
-:103B4000A89F4E3FF1FB78571B4F2EF67F4C785CB9
-:103B5000B829C8E321FF1C2BE5713AC349CC724A4E
-:103B600025ED676B1BB8693FF65F1474905C3855A0
-:103B70006B62B8DE981F5E65C6F2FAA160A5EB869F
-:103B8000AA33916C72298F6BCCFF0D6B33E20FE976
-:103B9000E76F344F91276013C1EBA08DE5690F7477
-:103BA00011D57BAA0EFF157172D73CB1177A3ED79B
-:103BB00071D7162B8E8945DF621DE7D84F8F379D51
-:103BC000193F1DC5FE434BD36CFD9CF00CBA8F67AB
-:103BD0003BC54F11AEAB9A7AB7572F58FCB4F9A436
-:103BE000889FAE008E03AD4C196B4A44379740FC5A
-:103BF00074CAC444F1D3C87B063B735593900B3A07
-:103C0000FC86578D4C16792948A57C891E1FD3F751
-:103C100075B7664F3669706B21B8313C05DCDA0840
-:103C20006E0C4F1D6E33843F425F8853BCD66316C3
-:103C300079B1910B3651BEE054A6C893D767DB44E7
-:103C40007B8EC82F9C411F9931F634F2C19A667160
-:103C50009F08BECF79B517B30F3886509E33D3CCAB
-:103C600071DAED9EFB6AB6733D99F9CF0A6A5B1E65
-:103C7000CE3BFCC3B9EA027A5E62E773F27A3EA7F2
-:103C8000A5AFC8E7B8F2B47C4EDC7C76B8A9B28D9B
-:103C9000E6CB137E4B8F74ECD3F2115A1E2823DF30
-:103CA00098AF70C4E52BE2F3956B9A17ECDF2EE228
-:103CB0002B2C9F87FF7824FB63F1F3B8671AFDB7BD
-:103CC0003523753FEA1147A2EF1852AB8CF4D8A206
-:103CD000E1BBA1AFC8479C6D7C284F36F8552D79C4
-:103CE000E71647D0FB911FEA4ED03FDE0F3D1FFF86
-:103CF000D6CDE31BEF074CE0DF6E99C8F11441DF2E
-:103D00006B9AC5FEBBE3699A5FA59F3FD2C7B16AB4
-:103D10007E1CD773A2724ACF870D75DB985E876AC7
-:103D2000F74535FC7B4A68650EE5D76675513E72EE
-:103D3000E80E89F3EE439D7ECE43746C98CEF9F184
-:103D4000BEC981A727C6C49F76B87E9AC9F9022D3D
-:103D5000DECFF7E6A0DE53D715762A64EF8E04BED9
-:103D60006727392E1F107F3F4E7C7D4E99D0C39917
-:103D7000D741C27B4F3E9F28DACFF4DFAF6038A136
-:103D8000BF9B2CE4ADA2D7FFBFE4A976B61DE2EF3E
-:103D90007D4EF94093B3FF0997A29C3D5112389E86
-:103DA00050CE5ABA58CE8627289F919E5C4E177DDA
-:103DB000101E6E4C7C3F8F5C76A9E2E16981877CA6
-:103DC0001D0FF75C92F942C4437659223CA05F452F
-:103DD000F06AF32983A85D29510653D98D8F1F26D8
-:103DE000E68B5965C2EEBB58F858A7E1E35EC207FF
-:103DF000C769642D4E93C7CF9B357CAC39031FEF49
-:103E00000B7C94E8F878EEBCF09151956168779757
-:103E10001BF191EACB35D49DF9467C240F2D308CD3
-:103E2000B7BC4C16F7240D9C68E877263E8CFEC084
-:103E30009DF45E2FF6E8C04067057D4B34606E7BD5
-:103E400007C9E64C7F5B0595FA3E37C7F9737AB927
-:103E50005CC35FE6D4C4F85DA0F15BC644E526030D
-:103E60003D7C2F317FD668FD979728B794C5F2F334
-:103E70009589FB2FD1FADF3641591CDB1F7FD64BCA
-:103E800031F6784FFB0E242BCBCB78FD224FB6A317
-:103E90003E95F3663B92E476CA57ABF54EC3BD75CB
-:103EA00083E937AC67FEE89B0E95CED9D13D4168DA
-:103EB000596DBBA35FEE1A6CDA96317C25C1B1A9AE
-:103EC0006C88B8BF7591FF6DCAEF28EA09ED1CD266
-:103ED0007CBEEFC814EE63A27BB2C09D714EF92385
-:103EE0009467E25EB7C120BE238620EB41C90FE98B
-:103EF000F4DDB205FC225F4EFDC5F785BCF9140860
-:103F000073DD0511AEA7697EDE0365393C6E3AC8E4
-:103F1000260124AF89E4A8CEA70E4F90E9DF53EB2A
-:103F200036AD245FCE0250467EA073207FCF0B9526
-:103F3000A0523ECB040EB6334DEB0F7CCD793AFD4B
-:103F4000FBC397FB88EF0FCF717FE7DAAF91EEE508
-:103F5000F344EFE56BD4EC01FD5E3EB532C8DF976C
-:103F6000AB2BEDEE06CF99DF973F3A31B08BF0FDEA
-:103F7000B7A4412191640E4E98EDBAA0E3872FF2C9
-:103F8000F8AF5CE4F1DFEC6DFCBBE9D752CAEBF9AA
-:103F90008F123F37B88AD9EED4CB78BC5DA12811F7
-:103FA000EA27395E1BF0619FA83DE73C6A627FA863
-:103FB000C124CE9FA9EF99D8EE827C41074E19F219
-:103FC00072C645C7717A838345DC49C45FEAFF74D2
-:103FD000D708B2BF7F99322B9286E31D7C55D87FDC
-:103FE00096A991CD74BF73FF349B773BF2DD3DDA28
-:103FF0007AEDA513EEBD137FBD798A90172E8BF74E
-:10400000F2023EB7343342F6A3ABD82253AEC01906
-:1040100097D76CB5B42553BCB275C77D15A3B0FB5B
-:1040200063752FB91B137CEFE9D4F29A23A5C472F0
-:10403000F09F939244DCCB67BC4FD85AAE9D2B497E
-:104040008554B2232DFF52D2129D07D04B7DFE2204
-:104050004FA48ABEBF8ED0256E88E7A292EAA464E0
-:104060000F9F8BE824F8567AC30EB27F1F5F10BCF7
-:1040700035F6FBD3D61270911DEF9B22CEC36E5046
-:104080002417DDAFF160C4C2F78E3FB8E8E9E6144B
-:10409000ACEF3D6A76133C5AFDEF3993B1FE388E92
-:1040A0004BF2EEE00E71CE529D0FA16108BF56F2A9
-:1040B0002AB1BE5B11E7B2D9212BD6AEEA43F8FF95
-:1040C00075725F016F0856D3BD9DEB5226F37D9646
-:1040D000D973443C78BA74B483DE7FB0C4CEF81B85
-:1040E000A29DD331A9D57C9F65DFF9C6733A0F2E07
-:1040F000EF5409BFEE52BB5BE5F3974ED7587CDF18
-:10410000F5A8192456715D3CF974C929D6E5157EC8
-:10411000EEE37258A5FB8EFBE27BF56EBE35D170E7
-:104120001E68F726E19FA68D777A91D271BD71E75F
-:1041300085F475B5E1BAE8DE63D7508E4764CC31BB
-:10414000AE2F2DCE6F70C6D5A79677DFE3339CF0E8
-:10415000FD85FFA785AF71AB574EE47FB6D64167AB
-:1041600055CCB904670F71C09AC982AE6D592F380A
-:10417000C84EF9C27FC4433878E59F073EBC97CA52
-:104180007FFD6ED75284CFEFBF7E73C793B4BFDA83
-:10419000BB0F11BDEAFE189FC1C4F5BC586D63B8D2
-:1041A000F96768E7397D1D2F587DDCCEF9A5B5FB91
-:1041B00093B87D64398492B07DA445C9BA99E8AEBC
-:1041C00053F2D6CB3488388FA8E37FED0D7E138C65
-:1041D000213CFA25BA0F639A76BE76C3229009FF76
-:1041E000B645ED7C5EDDB75C9C57F729D5497CDE92
-:1041F000748E99CF87D4575F73F930ACEFBA5CDC1B
-:104200004F3563B9328FE75704BDA475169B9713DA
-:104210005D6689FB9AF4F3A645D0C5DF7F8CF4B6C2
-:1042200077D848DECC4700D3FA5A357C69718322AF
-:104230005FA74AF6A4CB6BC463461CDEE2F1BA4228
-:10424000C7E34818497894A12D99F4E14300ED742F
-:10425000AFC086E54FCFA3F36C5FA8690CAF9EF8A3
-:10426000F91DB4579511740F8B83CB4EB457A9DC4D
-:1042700085F62A95AE60C575CB71DD7BDE38F8D248
-:104280000F71BA594AF5957444AB48CB7B81BA7427
-:104290005025AEFF06E25E51DF4289C4777D92A1D0
-:1042A000BED66389FE3D00FCD595A5FF7D80D35B1E
-:1042B00094A108964C8B968F11F559E487C4B4EFFE
-:1042C0009E69EC5FB63F66FC81B8DEC5366E0FEDC9
-:1042D0005BBA45B5C4B43F87F572805735FBF1FA38
-:1042E0009D66FFF604F2EDDD7261475AFE052AC9AC
-:1042F000B52FD14E23FF5E322B2CDF21D72227BAD8
-:10430000570F00E561AC5F2E1BE5EBE51A5F58FC2B
-:1043100015A0E5C7E01B3DFE803F7BFE388BEF63B9
-:104320005A35C4C2F70FA13EF0F696AFB3782C9F72
-:10433000C6DEDBF5AC2EBF87C1309AFF4B28FF43AA
-:1043400005F341CCBD0DC4F76DCF5FB614E7F11D89
-:104350004DE638AAE45A9FC2F731D535B13C7F40CB
-:1043600009FCB63CE67C4963FAC242922FFA3999BD
-:10437000E8BD47D798BFCDBDF71DD50780F4C297DC
-:10438000485AF65EE8B0B16EEF115AC7EABA762E17
-:104390009D6E85858DDD12E4B8CF154AE04FB43EA1
-:1043A0007B26B6C7F089D58DEF19FC0EE37D9CB254
-:1043B0003BE224B86F28F9C049F3B71E167CBDE173
-:1043C000F0EC24E2BB56EFA124E29B2FE8E2C7EF1A
-:1043D000C0273EE5559661BBDF48BD9EE8674F4369
-:1043E0001ADB150797DF7F2DF1CF8DBFF801C3BB17
-:1043F0009B6FE0E14195CE18BE818799AEBBF9462F
-:10440000ABF7CC377F67BEDADDCD37A2EECB074303
-:10441000FDE04C63FF6EBEA0F1912F1EAFB073BBE9
-:104420007DD2C35BD418BE3A49F558BEF909F24DA6
-:1044300002B93F7D9246DF17986F522E32DF0C9DF6
-:10444000A4C9CFEFCE3763275D14BED9633A1FBE30
-:10445000B9EC4CBEA99AD4F7DBF34DAB3BCCE7E902
-:104460005AE79813FE7D900F347939757EA0B28D8E
-:10447000EC1A45DCDF374D9A99E5F3109F497487B4
-:1044800034EA4FA1CF0F5EDFFD7D06EB67FDFEF541
-:10449000F58450B293160BBAE9AC1371DF6952F987
-:1044A000B4C5A477E93B024A3553F694EC02D4FB39
-:1044B00032D985D05EE1C179365499A04DA62D0739
-:1044C000AB87F1F861B6CF8668717FA7942FBE677E
-:1044D0009A29FEEE85FE5D4CB562BC5FB6FF59ECD5
-:1044E000265C770AF931EE12F17750164D8AD7BF64
-:1044F0006887E0FA3A07DA984E362857F71A273ACB
-:10450000E35CB52F98302FF9D6249376CFBEF233E3
-:10451000A2B3DD6F6C49A673127B24E0F339F383F9
-:104520004FCD23BE73A942DEB4AEF833A52361D7C5
-:10453000B41F1AF5347C6AD4D3F0A9514F6BF51E21
-:10454000E58D7AC2A8A7B57AB79ED6EADD7A5AABCE
-:1045500047E5CDA7063DBD61D2A70679F31ED5CFAD
-:10456000414F1F9E7471F4F4A88B2C6F9EBE70F2A5
-:1045700066DFA4BE1743DE1C392F79937DA6BC39B4
-:10458000743EF2C6B5B943A5F4CCC21EF8A056C31A
-:10459000FB5B65CADB343E949C5BBC269EBE3AAA9C
-:1045A00017AEA6BF2BF3A557F87F3DBDEFAAFDD5EB
-:1045B00091C6183FDC65E914DF23D4EEE1E7B76C60
-:1045C0007E95E3B1675D2F5D105A74A65E45BBC84A
-:1045D000C1F4EB35732EFC7CD7D13A47F0DB95CF95
-:1045E000DEC1FC945C6E9C4FB77F3BAA6D669EAFAC
-:1045F00044C8E99EECA19EE6FDA05C16F7FFC5CD80
-:104600001F4FBF489FE9938B981E2D742FF8179D5D
-:10461000C07FA7EABF4E6EFCBF8A7C49E9C51193F3
-:10462000CF834EA76BF84CB06FEFC5DDF705E3CF36
-:10463000E993CFC38E3E4CFBEE9B70DFDF67385EA5
-:10464000B47D5F30FFE1E6F3C1F7BBE5DDFBE6EFEC
-:104650005132B47D6FF8E735EF515C63C3BFAE7D77
-:104660008AE21AF77D9DB78DE21AFABD726910FDD4
-:1046700091F5EF8F102E2EBFF89E24634ECC774518
-:10468000C0FE7DF4BB13B2377CDDEDFF2BF7CA9182
-:104690007DD2DBBD72AD36635C4F2FAF2A17F64A71
-:1046A000AB691DC72336A05F558F78EB9823E211C5
-:1046B000AD68A7B0DC9953D0AB7DB4AB4EE1B85335
-:1046C0006B9D9FCB7BEB6670B9EBB5256524777D41
-:1046D000AF2D62BDE7F3FAAF7B1881E4AEF8D049A5
-:1046E000CFEFF5E8FE90B05FD2C87EC1FAC393D792
-:1046F0006F8D8D0B8CFAEFE15BD481D178555B66C1
-:104700008CDD23C7FA51A012B944FD28AC1BEC9AEA
-:1047100011EC47ED26BB06EBED934718EC1A7D9E96
-:10472000B566A821BB66ED0EF38C4476CDACF2C421
-:104730007E14D6390FE27039F8FB7F49FBFB5F51DD
-:104740007EE9DDAEC99D7271ED9ADF4FBE30F18713
-:104750006E3ED6EC990714E50D4DAE7C47F9B1D10C
-:104760004CF1E36F2B3F4692FCC837C88FCFCE4742
-:104770007ECC2A771BE2A20765B5CF58B2D37798D3
-:10478000A15ED6F42FD63BD1AF31219C7E5221B110
-:104790009FB3C10BFCF7FDA64BF35F267AD8BDC8CB
-:1047A000CCDFBB3FA88873220FCD11E7A91E5E5E48
-:1047B000309B3E235A9772C3DD4914D72E17F70456
-:1047C0004C97CA39CEFDE00C61E7643BDB2FA7FDB7
-:1047D0001FACB000D1D5D9E2DC146EE778B5E6475E
-:1047E00081B499FD0ED70F2D6E3AAF1A1FBF769682
-:1047F0007CCCDFCD83F40A7FDF7DB6F8F5B78D5B27
-:104800000F98F29DE3D6CC8F35CF0DBF41759E49F1
-:104810009F4726CBE25C620F7A2C9E9F3BAAA7A7FC
-:10482000457A3917E524FB29E61E59FD7BD659E563
-:10483000621E27D94F8551BAE8A82EEEF55EDA94AC
-:10484000DA678EC4E685522CED3C5E4AED3E7EBEB4
-:104850009ECE2F90CCB27859AE3E5E89F239C178A7
-:10486000FBEA8287092EBFAEAB3D4C71EA49964EFA
-:1048700089FE9EEBDE3A95EB7BEA9AB8DC55D7C60B
-:10488000FDD6D76DE2F2BEBA103FBFB7EE31AEDF54
-:104890005DD7CEF5C773C53C132D211E6752178E09
-:1048A0001FC30F659FE03C31782E8DA886F6096FF7
-:1048B0003619DA8B3ADB0CF5BEFE4D86FE7D66843A
-:1048C0000CED6F950502538AE85CC363867ECEFCCF
-:1048D0007643FD5CFD850BDD6F654AAAE51FC8AF19
-:1048E0008302484F4867E9B5B2CA79F31AC197FD08
-:1048F0006BBD61AA6F71D998BF75BAE433CB26B18D
-:104900007E53CC3DB51D2E717EB2A1AF88A734FC7D
-:104910004CD4B76489F391C3AB447EA461A0B8972B
-:1049200044CFC36F7169F793F8C43D1A83F223FC37
-:10493000DDED20EDEFC139CB45FECC0D6ECECF378E
-:10494000D481F67D6284F31D1960F68AFBD5159932
-:10495000FF9E920542F5385F43BE5BBD85E44C3057
-:10496000D56BF6F29F960D99298F48E2899330ED29
-:104970009ADED1F2F2491F009F3BE886CFE7E27B47
-:1049800084DA2EBEB7A97F6D17E7E3B6FC42DC637D
-:10499000130FD78E5F7CC5F72A6DFDD95759C4D444
-:1049A0005BBBCFED7425C57E8FB6A52695EF5BD892
-:1049B0005A9BCBE728B6D688EF8D6510FBDDB2C8D1
-:1049C000C6E730B6D69ACD24274F2DB2305CF4F529
-:1049D000C7CFAB7FBFB94E3BD773AF76AE67AD766F
-:1049E000CEEA6EED5C4FB376CE6A8D763E76159D3F
-:1049F000EBB1133CC5B99EADB50B14ED3CAB7E2FAE
-:104A000003C35742F8F2772A56D86B1A07F4870C7B
-:104A1000196EF1DFC7665425C79DE7319EB74AF589
-:104A20000D30D49DF9C6F356C9434719CFA90E34AA
-:104A30009EEFB1798CE77A2CCE4AE3F9D058FA444C
-:104A4000609A566CAC27FC77FF7D477AD88FFF7E43
-:104A50005C37FD86F47340129D4349637ACDAC12F6
-:104A6000F499A17D0FE3864E2E53915EA874529E59
-:104A70005DA273902AD351F4FB37A5577A3ADFBF72
-:104A80000720AD4CFCF700F473087FD1ECA8A553C8
-:104A9000944FA71445E7BB7F8A723CB6AE973DC9D9
-:104AA00085FFADF2FF01C18CE32B00800000000008
-:104AB0001F8B080000000000000BB555CF4B1B41B9
-:104AC00014FEB2BBD144A35934B6865A481A520DCB
-:104AD000A4B06D37A225D2D5869283C8163C78E85B
-:104AE00021879CFAE358E86D635B904A24A9422F22
-:104AF00052C8C11E0A821EFC03621B7A8E680B52CA
-:104B000029C18AE7405B7A11D23793AC899BC47A7A
-:104B1000E940F2F266E6FDF8BEF7E6E50D68798158
-:104B200090A2DD137D40245A2A3848065468B930D3
-:104B3000305324E9A2FDB5AA94359114C0A9095CAB
-:104B40009ABA1E2F4912D9C9163BFDD4CECEEF8D8D
-:104B500031BB0126252EAF1F39000FB015B3E51666
-:104B6000FDC0C20E9DABC0EF315B0E7E96DC49A549
-:104B700032CA4D01917D69BDDE4BC02CFB49F17AF3
-:104B8000C73D0309F29F3180FC30BBF3D0CD745791
-:104B9000343BE5A33C427B4548E42F5284DC078646
-:104BA000AFAC81F6E7AFDE17258AFB6109B84CFB95
-:104BB0000BF652EC11DDDB1AEF945F28CCCFB4FD7D
-:104BC000299DCF5C1121325DB71F962855D860AB67
-:104BD0005C237EA25255A755A1CF0334E894F70C6D
-:104BE000D347EABAFB243029535ECF0FFC1B8591D3
-:104BF000BA5D805261FBB7B51ECF71376D8410AAC4
-:104C000088751C15B6EE36CB3F866FA360673821DA
-:104C100030BED43D21E7A738BD5F96BB183EB1A892
-:104C20008B25B2478C508F13CE3DDD8D73FC7D6795
-:104C3000FC7502078683CBA22173B9650C72796C6F
-:104C4000F8B83C3246B83C34142E4BC61897408A0C
-:104C5000D7B3D3061E2F63C47763C1F6F1645B59E3
-:104C60006775C78484F7ACCE432AB76BBA17253F64
-:104C70000D7C115DBC190A3D6F2799FDBB27028F82
-:104C8000B91ADDF4EAE166FBD56753E7E24E1B7320
-:104C9000BBAFECEDCF5D1D486CB6F0FBB2D6C740A4
-:104CA00096E711880B58A43CBC0EC529D3FDF4B679
-:104CB00093F7754871E49C0CDF9A0B3F4C1CD43F72
-:104CC000CB696A19829CD524997AEAD46F8F42F90C
-:104CD00034F45560FAE320AB677A223FA8138ED5EF
-:104CE0009B9FE786C92EB5232288E6BC5E6B369E65
-:104CF00097892B202982DC027F3B5C8F6BF618F2B0
-:104D0000F0B960E5DF7ADFAC3BADB4345A7BA2B4D6
-:104D1000125D898C4675D2D66D9C07A70FFC7D77F6
-:104D200040CB33BC17C80FB8433CE7238994AB9EF4
-:104D30004FBB3A997974D7FACF9B2C3B12846FF909
-:104D40001F7DD8672F3A58BD9692423CD7228FF5E7
-:104D5000DA9C5B526F39D97B44B8751EFD716B9F2D
-:104D600056F35991C83F9B4F2AF96FC1F737C67761
-:104D7000B59FF745AA6B46137CAC9FFB891B8D4200
-:104D8000F547904B116FD9A8A0E4E9FC97DAA17020
-:104D9000F796F9D0145F6DE8A36BCD73675B73551D
-:104DA000E74D1041366F7E0ECDBAF32DEA6B4A9374
-:104DB0004773EE34F358AEE24C567122DCFA3DD71D
-:104DC000EB355F1BEA488867FBE6EB797DD38E7F86
-:104DD0006B1FAC2475779EFE1FF0691FBE1B8C8F66
-:104DE000B3EFAF1D6F569E8EFF334FD6F3A23957E8
-:104DF0002E88F3A2F74CFD2FDBA790A6F00700004A
-:104E000000000000000000001F8B080000000000F0
-:104E1000000BFB51CFC0F0030977F3A0F2BFA3F161
-:104E200057F1A3F2CBB851F99E68FC2634FDE7D1C7
-:104E3000E4591820B4233BAA38B158988381410E15
-:104E400088353950C5F3A1E6D6002DE807E215AC48
-:104E500084CD7A27C5C0F05F9681E12890AE06E246
-:104E60004B4036931C0303AF34038307104703F111
-:104E70003B190686A940FA25106F9086E8E3048A5C
-:104E80009D9421CFFD6D42E4E91BC5D4C1B7955077
-:104E9000F993B51918AEE93030A8E941F8E791E483
-:104EA0009D806253B421EC70550686BDBA0C0C8708
-:104EB00095B09B1B0194DF07948FD0C36FBF831104
-:104EC0002A7FAB352AFF8B212AFFB2272ABFD61BA8
-:104ED000955FEA03A10135720CD6D80300000000EB
-:104EE00000000000000000001F8B08000000000010
-:104EF000000BCD7D0B7C15E595F899C79D3BF79987
-:104F00004972031708308941A2061C204040C44959
-:104F1000081A6C8A17A44A5DAA576A2D228F2B6241
-:104F20004D5D6B26EFF0B08DE856FE6AF5C26A97CC
-:104F30005AADD1D296B6DA26802EB61422A5D6B6B0
-:104F4000ECBF415D6D5965A35BD4B5B4EC77CE374A
-:104F500093CC5C6E1EF6F1B371BBC337F33DCE77D5
-:104F6000BE73CE775EDF7715D107FA250067F08F25
-:104F70003DCF170160E6C0335A01A57239C0262122
-:104F800068848BD8F34FD2F2CE30FB06567CE9947E
-:104F90008176578340F59F2F6A8DF7B2EFED93BE70
-:104FA0001A8732567FBC40F59D7ACEF30690000AF0
-:104FB000004A3A56AA09D6CFA6318D2AD66FD7B75E
-:104FC0002D0736DEA91205241CAF287BFBD67A807C
-:104FD000AEC90097C056B538C6CA47256333641BAF
-:104FE000A788C671CAFEB8085DA5407F67D8FF369E
-:104FF0007D290909366ECBA4AF2E47B895AE9B40EC
-:105000008F00DC3626093A7B3F0D449A9752618126
-:10501000C9CAAA6EC5AD29678FD38E7829C35E3BF6
-:10502000E24B2303EF97387861F8C8C00BC05C00EF
-:105030000DA67759580E00B5CFECD7B4C7D7E223E9
-:105040001BFFECF9F3F1A7824E7800B5239E880C84
-:10505000C0B3C9D7D725317C5B45603CC6AAE4B054
-:10506000712A5DFD648ED73F4FB9C3B3FE5310CE96
-:10507000029A8720BBFACB8467965D6F169B393EF8
-:105080009D79E5CCE3E30CD7FFE588E202ACDF11C4
-:10509000B7222E7A942D0FDE83767DCDF4D61B0CAD
-:1050A0003F21C4CF4CC48F15477A74E8580AEB0DE2
-:1050B000356C3E0516F449B94436268C02C8C77FC4
-:1050C000B126B2A65722BD8E32595DF67D74CC6AE8
-:1050D00090D8FB31F3D282CC9E1178487B23040810
-:1050E0004DC9196A6471BAEF9CD1DECBE8F614445D
-:1050F0003A36B36793CCFA45BC1D8BA41F632035A9
-:105100005C9C7AA4979523960C8DE5342EF1E1ED05
-:10511000D2F9C66646D29B6DFA6FAF57E9D95AAF3E
-:1051200041971FA0B93E4ECFFB4377FD1BF65F674B
-:10513000F9353F7BCA9DB73E85E52680048E1789E9
-:10514000F1FE4156B5C7342C8389788F94F0E74B34
-:10515000881706E7571926112F3FB0F1A44317F11E
-:105160006B93B13407B2E0D379864ABD7C16D08305
-:10517000ACE540D91FCFF3947DDA584F7D8042C211
-:105180001B9599A85825707914917BC0403819BE99
-:10519000B2CA055BAE48D2B4BE2E36BFF06CC5D8DD
-:1051A000C99ADE2D78F96B8CC0E9A34C50E91983BC
-:1051B000BE7D67102F8698DECCC60A4E2BEEEC8A99
-:1051C000E1988A3189AD63D097D6F2B2F01794CBCB
-:1051D0006FF53A70177FFCF891A4EE5422CBB87F9C
-:1051E000B0D7EF92D38755E47F759A98489721BC42
-:1051F00056824D1EB6EAB288F3FEF8E01E7ABD8EE6
-:10520000DBFCDC0A2AD59771BDCA07D6ABDD60EBA3
-:1052100085FC53CED7AB5DB6D491ACD7E3001EBCB2
-:1052200084FAF1D2C9F152F631E3A569EFF244965E
-:1052300079B4DAEB29836194121E141DE1DCDAC023
-:10524000E9D662749B4DFE0E860729E7583C5976D5
-:1052500036DEAF12F8380B6C3E71F0B4C9106BD269
-:1052600061C453470DCAADAD25A28872E9E3C2936C
-:1052700003D7E67EB8D21CAED28F172E29D4B53C08
-:105280001B3FB666F0E316849BD35D0DA73BF1632D
-:10529000A53B07AE00F2035FE7045F67F91F629D5D
-:1052A0005BFBD739C9D739FEF1ACB3B39F836A2C06
-:1052B000C7755BA5313E6470DC2C59CAF5B8BF8652
-:1052C0000478CC607480F08F617A66B8F1655D0710
-:1052D000B84F08707D435A919374C1BB4A663ACB6C
-:1052E000747CBFF5DCE410F380B4AFAFD78193F1E9
-:1052F0006FDDB186B6FD2E38BF24446204E76C989A
-:105300008D70BE1B5E9AD30583F777A25E6D907D8C
-:1053100000EFD75B6DFB7D677FBF59825436FDF28E
-:10532000415B2E80DAA9D0FCEF643C380DF1706E41
-:105330003544D97A841B47E13C20CC3ECE61FDEC5C
-:105340000A34C82EFC0E369F7EBC3AED98BAE3CFE5
-:105350003BBBFD60ED3E14928F080CBF2D31B11A9E
-:10536000E1524B208D6BE0DFB5A46B2C0C0E6F4B24
-:10537000EC6F03EFA0EB66D77B37DCD80AAC5D930C
-:10538000CF38A0333A692E108D461880C3A1176715
-:105390005D1C3C8E745D7EDB4F5F5B2F05D233411D
-:1053A00097A6FDF5747500E9EA82BF3F5DBDF18FF8
-:1053B0004B572784827F5CBA52EA24FD75666714D6
-:1053C000C9269793DA4A8BD61FC7667249EA98D6E0
-:1053D00085F212E2CC3EE3C380C8CA8A6672BD176A
-:1053E0000C40FD552DF1CA495FA1574EC6979B5DF4
-:1053F0004EBF9B751C57A171D13CC271E53074053D
-:10540000A25856A81F24E733E7303CC18335C5BCFA
-:105410009D81ED069B8F8CEDD878A87E9C29C27665
-:10542000FF9493C862F70ECCDF3B4E7C59222711C4
-:1054300019797D08CBFA1B2EBC0FDE4E86371CBCBB
-:1054400030FA2F453F49C100FECD5DB790FF2200E5
-:10545000A241765D61AB855FDBF0FFCDC17D9FF33F
-:10546000755BE1740DF52D60FB0DBEB7842F0096C2
-:105470003F1474E25B673C299C00A21BBBDE70EB0F
-:105480007F3BF25316FE5E21727DE3FDBB52FF8D22
-:10549000F6A0B559D01F63783D54FF01BCC6F87221
-:1054A00065D7790AFA3DAE134751BD95F38A940545
-:1054B000AE7E5602B70B017AE52511F7B80D5C0FE9
-:1054C000ED94F6E2BC5FAD90D2B8FFBD5AF13FA4B7
-:1054D0009FBF6A4A6944F2ABED57E60C25770ED5BB
-:1054E000737BD6A977C894687F3F24F786B3E9F128
-:1054F00003E3A769FC2B2A24EF3E2DF7CAB8FEEF81
-:105500007F097CA83F1FAA5785D72631E317E7C933
-:10551000E868654591827E87E1E6B5C8F68339F88B
-:1055200075E6D91C16699ECDE12AF25B356BEF92C8
-:10553000FD788ABD47793018BC8EDFAA595B9A1571
-:105540001F4A84EB5B8A2F99DDDEB4E7EB9433FDD1
-:10555000590E7CAD616E17B586395CAD31318DFC6D
-:10556000DF1ACF3EAEF36CB2E173EA35C7B85EDA4C
-:10557000CCE4C948E091C35E7818DA8EA0BF64BC61
-:105580002D6BF26B7B1A3E8F7676326C4A06BEE943
-:105590001126B0F2B8B8049B35366E4D557B356395
-:1055A00081BC1589171918301A3A2AD10F38F14BD6
-:1055B0001BBBBFC6E6356E8E5FC3767935A9EEE7B5
-:1055C00058BBB14CCC49ACDDE8636BD7A29CFD174E
-:1055D000B41351105B3736A01FAB1987980BF0B08E
-:1055E000B8A212FD6C3270B9C0A49E2E8F42FF0C7F
-:1055F00090736630F9C0FE8433FE817683E12D62BC
-:10560000CB2B9A37C9ABA543CBAB8DBC7F8BFD872A
-:10561000F266DCC078D47ECC2AC583C7D119DFF707
-:10562000DB74E987257FD771C6C2D200EA2791656E
-:10563000A296C6FAD0998B7EA8516B64E8C2EFE5BA
-:105640001D0D4C7C0C8B7726F76AB8DF38292C713E
-:10565000C1FB2B91FB9926DC715410D0EF6B309578
-:105660007E1A96EBA665A3D36D367DF6976B560A28
-:10567000491A2FB16812CAB55A91ECDE7F59363DEE
-:10568000D7DDFE037B9C81F5075D9E8565BEFEF23E
-:1056900032D10C4CFDCBD75FFE88EB9FBF51F1ECB4
-:1056A000A71F755D64B43D0A865FFFBF761C67DD8A
-:1056B000CEE60F2E1F27DC511D40F9775F6268B9D7
-:1056C00072F6BA2DA5751BB50CCC7416B9129004E0
-:1056D000CFBEEA3C554881C1D6593A2A917C9346BF
-:1056E000CF5ABE03061F578A2919F69BDD9F65EE28
-:1056F0002B61EBFF4970FE7A649443B52887502EE6
-:1057000095FB5E77FB4718C607CA0CF76F7F71DF02
-:105710007E9447169347E83FCDFC5E8B65173D5C52
-:105720002AF1FD77EF777E79AEC0C6396CF8753F08
-:105730007B7550E87983FCBE9512EDC7089F3A0B44
-:10574000DB032927874DC9AC66F57BCA05DA47FD1F
-:10575000F0D2B5FF4CED4314EFE899F7DA972F62DA
-:10576000ED3F79B10F39876302DBC7D93F51AF39BC
-:10577000DDFBE58B58FD8317E70FA96FD5E27C5D54
-:105780007472C5B3DEF20AA43784FF3FDEAC7D90AD
-:105790008D771872127E7C5670F80E237C48F7BD08
-:1057A000BF7E03F5C243A640FEA8C3153F8FA13DAF
-:1057B0005E690AA42F2E9E27A4FD59E6B978DE2D36
-:1057C0001327B0FE1246480BB0EF072BDFD97A1132
-:1057D00083F78AEF4B77E3F3E41EA920593638BCF0
-:1057E000CEFB2B4CEFFB7EBD189216E21D341E97AC
-:1057F000F0C58CB89B5EFBF518396166F3B7AD91C7
-:10580000B8FF51D00CD2EFE4B002388FC1EADF38D4
-:1058100008FDE6405F97847038FAF7E92B75B73CCE
-:1058200074E050E44412C791340576A29E917B95B2
-:10583000EE9E7FBDC4E34242DC2478148DC3A3C82E
-:105840008699CDDF5467C3E3F403D061B7EF83DEFD
-:10585000F0007C2D81C472F45B58B9DC7FD81CF158
-:10586000FA0377DBFD3CE6F4E783AC71158046EA8A
-:10587000BF6A54858AFD3755703D490783FCE3CDE7
-:10588000CC6E8421F4BAADB6BCD88CF10D3FC639CC
-:10589000343BCE11E7FA53F819F2939D2A13C9AE9F
-:1058A00019AC9F88E1D54742A55E3BC6D15F027A1D
-:1058B0005E861FC8EBF7F18D924547EF437A1D0EC8
-:1058C000FE7E3DCFAED726A7542D2B9ED243EA7342
-:1058D0007F3FFCF1F6215FA7960DAEBF15DE1CBA27
-:1058E000CAEC5FC95752698ADB25E21E7DC09693D8
-:1058F0004ABE9AC27D01D4C1BE0779FB30FB8EF14E
-:105900008C7042477F8A043C2EA4221FB8F0F38E8D
-:10591000DDEE1A59B4F5F914C541053D457E3BB598
-:1059200090F18F70763BE7D96BB76FFBD3ADAF10BB
-:105930007F14A8C41F82CEF827CB388D92F996C465
-:105940009EEB24F36D7CFAFE2C25B3F1C97FD9724E
-:1059500045AD4DE86A31C515C91EC9842320F37EC3
-:105960006F74E0B75214A71C29FC1F8C107E671CB3
-:1059700006BF2C1710FC3E7C0E06BF64C393077A4B
-:10598000838C724DE7F2156089EED64B6E90B9BCF0
-:10599000C8B3E513C02D71B7BD759DDDCF48E79342
-:1059A000278F6C3ECEB86C3E1364BE1E13E521D625
-:1059B00063BC0DC70D32DFEFD4EA841E67EB923B68
-:1059C000085DCDB3E148C9A2AD57DCF291E8EA82A7
-:1059D00011CE63DEC0BACCB6D7A562A879CCB2E747
-:1059E000D121C19CD7512F3EC7F1F72CF5ACCB6D1F
-:1059F000367E3AFCCEBA6CF0ACCBCDF6BC463A9FC4
-:105A000085767FC3CDE7B681755962CF67E950F3DC
-:105A100071D5BFDAAEBFDCAE4F76C76D726923DADF
-:105A2000198D5262855C30301EABF71977BD779ABD
-:105A30004E35D8F5AEC7F7420DDFFF58BD95EE7A6B
-:105A400060451BD13FD082B602B3634A9AE756D96C
-:105A5000ED5651BBDAFEFE6FB2F983DA059A854640
-:105A60002B4CF5D662BD86057F76EAADF3C27B810D
-:105A700003EF0682B7BA1F8E5BDDF5E6C9E3A8BF68
-:105A8000B3E20E23F407F962C9768CF3E741A4036D
-:105A9000F33C5AE5D42398076059323C86F9047EDA
-:105AA00043401F5BB422F56F582FD762F635AE5BCB
-:105AB00055EA292C5B22249ACA299F80F205EA64C0
-:105AC00055F31B987F61C07656D662721AEDF316B5
-:105AD0002169E1BEF83329F96599E4ABB6A201FB6F
-:105AE000CFD7B99E0EBDB46F3970DD13BA96F21FD1
-:105AF00072195CE88F6AC980EBFED0846EDC6FEFB0
-:105B00002D50484F66065629CA97DBA5A081FD7522
-:105B1000177C81E0DDD6C0F31BB67DF20B04EF7D70
-:105B20000250DCF63E1FCF6FB8C7A76A8D1AF61772
-:105B30001DF339CA87C8D1FCE5361C08DF278A095E
-:105B4000BE7CD02A6F10487C75A37DDB52A190BE2D
-:105B5000BC2D36BD92FAAB50494FBD2F31BD81F4FB
-:105B60008E8A20F9E8F3C306D9ADD1D90A58588EE8
-:105B7000190DA867466605310706F20B01930B2045
-:105B80003219D258F6414747097B46DB995D924F5F
-:105B90007613DC80766F05C33BDA11967904ED92BB
-:105BA00030D87FD24113E7ED1B2701FA3D9CF58DDC
-:105BB00076F4B71FD2EE8AA64758AF6B64F522ED94
-:105BC000CCEE9F31827A1D23AC971E61BD2E5E6F95
-:105BD000587F87C1ED3D95FD87765B20D36E0E7BA8
-:105BE000ED615FC6F7CC785CE633331E7242F6C6D1
-:105BF00043866BEFC441869B2F3A25FAE19486AF2A
-:105C0000EFE89B837D57C65E153759FB9631D7C4A5
-:105C100049AE8D59C19FE3EDF7E397DBE56BECF2FD
-:105C20008AE56616F93EDAC7E57029FA4386F23B43
-:105C300000D71FDF60B09F1130796968FF49A6DE89
-:105C40009B29EF54D9AA427EDD96E07E4D3F322358
-:105C5000F26121901FD607A98E1294136046178E09
-:105C60001AE01F9FF98289FC7C688C044205AD8F85
-:105C700041FEF40C3AC9A40B7F863FE7AFA5930B16
-:105C80007DDE78ECDF8A4E94766944FCA3748CB098
-:105C90005E7A84F5BA4656CFDF2E8CAC5EC708EB31
-:105CA000A54758AF8BD76B9DA3F0FD1CBEDB689654
-:105CB00030B8E7AA9E72EBDCA0F7FB45614FB96DE7
-:105CC000A642FBBF53F6CF523DE53626E73DDF67E0
-:105CD00087A9BCA9A5AB8A6D6523E693FFFC0BF9E8
-:105CE000A4541DC62F5D2166D86D197CA5EA016CF0
-:105CF0009F2FEB80F953F931BE4FB1A799CE82DFC8
-:105D0000476CFEDF29F3FCCD6DB21E40FBF11F7D19
-:105D10009E0D3E0EAF33DFE1E075E4EF9B92AD6F79
-:105D20000D96F751CDF3326508525E6649B5596557
-:105D300032B924BFC8E36099FD5EAB249FF6B9EC8D
-:105D400061594BF2F89EDDDFA20299F41299C93530
-:105D5000D47B1448D414511C51247F9F1C1E66DF31
-:105D60002874C9ADE221E0B6F358E9930E50F93B2F
-:105D70003E6ED00092AF11E825633A07B59E73508E
-:105D80004FD305A0F686C0FDE7F334DCF76281BF90
-:105D900075BF2BA85FC1BC07CE843E42BF722FF9EE
-:105DA0003BFFE6FD0E036F00F37B2FA01042CC9D5E
-:105DB000DFEB8BA7E8259C3E73469A05BC09FD25C1
-:105DC00029BE2E8B06F943616C94ECB296D806D5A9
-:105DD000BDAE7FF4157BFC268AD67A8B1065CFC2C8
-:105DE0003566EF10747E068331E81F29BCC1EC1DB7
-:105DF000623FED8F6762BC3E0B1FB42AC934EAEFE5
-:105E0000D68430B7E7E514F919DB84BCE99BCB5D98
-:105E1000F45BA874215C9172D3427BAF2D5F345048
-:105E20004F95616B8F3095B5936A8D64163D62A076
-:105E3000BD7CC23D9F98E2D5A79A86A1F79661F4F2
-:105E40001E9F6224B3F943272BDCAEF505B37FBF59
-:105E500043AC2A51669E8D37A6E673FB3617DA856A
-:105E60000B39F950BE43E10BAF201E5A0A2E8D0F9D
-:105E7000355FD0BC7997378AE634656838666683C3
-:105E800063A4F9205AB54174D8AF2FC5385DA39EDD
-:105E9000248CC27C0FFE7777F9CE2ECC03F15DCF38
-:105EA000E3B292B90BD04FEDE84D92193C2ED27A65
-:105EB000CEE3FA5329D7874CF61FCE233A6F68BD3D
-:105EC0005ACA282F51BCFA5053FD1EC0F8BC03BF5C
-:105ED000E3C7CB9CD75CB1EAEAECF818993D7C1F8C
-:105EE000A317988CF1281591021DF51A95BF5C1F18
-:105EF000A7F2D67A9D9ECDF5A5F4DC824DE7209FD2
-:105F0000A7DA8B18DEDAE38FC63FC7AADC87B28335
-:105F1000F6FD6B17A09EBCB9BFCCCC4006F7660C53
-:105F200078333DE256E58A0568BF6F0E80ED57581D
-:105F3000B0C0F494AF6AAAC4B2ED67D8DC7A1DD5BC
-:105F4000BF6F3CD8E7204CF553AE7DEF11C547FC41
-:105F50008D7B0B6F6F36617F01D92EC32D0BBC6516
-:105F600030119E80CACBFB940DD43F890036DE4FA2
-:105F7000955BF97893B81F1FCA960E8347EED70733
-:105F800045E7F2B32C8FF25914C340F72BDC976B23
-:105F9000C33DD27EE424DFEF8E66DF2F07F86698DC
-:105FA0007DCD8663B8F567E8B0FD1049B070DC5F61
-:105FB000F038E2DF7BDCFB7C1F0D2F4A459F85E735
-:105FC00047E629C9EF21BD47CCCEAE22568ED67604
-:105FD00059C4BE231CF75E45B3E79D24FE77F0EC61
-:105FE000E81DFFE5F3AEA32F66521E5220CCF96FD9
-:105FF000A4F0F6A27E3573A01F78A26ACC50FA5A9C
-:1060000041424425AC5F5EE4D704D118EB2FE79AF8
-:10601000799E724EC5584FFD8851ECF9EED3CEF7FC
-:106020007CFF4BD7E91719F3F889AD373AE51F67BD
-:10603000CE7384FD3AE5EEDE0562295B87976B251A
-:10604000D2EF5EAE7DEDBE19584E4814BF3DB5BCD3
-:10605000C9878C7414CCC84CF4872525DB9F6E8EC1
-:10606000477CFE02FFC9C67B09F73D269F0EDBE792
-:106070007F989C188FE79F0E5F3C7B3CAEEB611FC7
-:10608000E76FB03A483EFDDC071E79F0735BFE18FF
-:106090006DDB9BD00F7954E065A96DFB028BE28329
-:1060A0005B5B2F637ACB951C85B0B456C86A0F44EE
-:1060B000FC0AE1E3432119F1B3799AD57A4B0CF349
-:1060C000DF74207DD50F09D2CBEAC0AA1451DF615D
-:1060D000F447716EB9AF309BDEF1737B3FF7C39528
-:1060E000A4EF2FADCDF5A131EFAF99E6433FEA958F
-:1060F00035953EB0F565CD059F9810E8FCD4B25AB1
-:10610000FF4EC4EB32D9F4658B6B5D99F07BF6A939
-:10611000690C8708FF51FBDC03405FA13BDE34CDF7
-:10612000CFED9D78C9D0F68203B7535E523BED792F
-:10613000C403C3369D4701B5AFF0DA88BBDF9013C7
-:10614000178E60BF2F2FFF2CDF9F195DA05FF1C559
-:10615000E39FF7515C7659BE87FF96564B1EF813A6
-:10616000F3429EF255B557E60CA97F24FD19F2CCF7
-:10617000B2CF618A2487371F13483EE44CE84B6353
-:106180009E26BC2C01D7FF1CFFEB5CF2BF46C7F577
-:10619000E9A82FC06F43DA632EF9D96CD3E560E329
-:1061A0003FE7E77AAD9C5743F1EDF78F0B3ACE57B7
-:1061B000C8AB9B8CF39515B311C76D2E12D318F78E
-:1061C000BEBD789B8AEBBDA9E4A3E981BE188FF719
-:1061D000EB96361DD97FB07669939F23C87CBFC6E6
-:1061E000CFE32D2DD652AD049771BF5689F30F140E
-:1061F00042D673A68CFED7F8D16F1FB380C7D713D2
-:10620000A45797A82B290F571E3B74BC36136FB2A7
-:106210001D07CCACF7A44D8F25153BA9DFF7CF1B8D
-:10622000BA5F072F1F1822F4D8FA04D65781CD87FA
-:10623000E17F4B29CFC36D2E7B86F02C9995A4CF9F
-:10624000FAB49489F5B694AD24BA6C6175F2D9D0DC
-:10625000B9D59D744E73CB9F787CE2C9B6FD4DA82D
-:106260003F6CE9BE0930AF32184F03CA8F2D536E11
-:1062700054110F5B7600F4201DCB9DE4940BD9FEE6
-:10628000F0900669664941A8CC04940B791A3F53F3
-:10629000B9375E05B86E5BCAC140D6CC4FA71A307D
-:1062A000F4B325CEE3DFC152B3A608E11E23921852
-:1062B000D021D98EE5E65A99E6D1AA717CA0DD7588
-:1062C000C6C9EFC23C98126E7795A07F9FF5AF7C50
-:1062D00089CF5BDF5E427EA22DB92F9BA8EF5A9F2C
-:1062E00004631270BD96F40499D111F65FA7655D41
-:1062F000F7AD62F29B7E57FC5ED67401E934133F22
-:10630000EFFBE0729C77F334117666D137F6F879BB
-:10631000BC2E6D2CBDA238CB38CFF9754F9E80FEB8
-:106320008142700F567FA09E4C7E7D343C16B17921
-:1063300014D4707F29649C638D4192ECDBD160356D
-:10634000203F3AE757C755277E95644F29B28CF214
-:10635000E9063BCFEAE479AEACB00532E857FF86F8
-:10636000CDF7A6033E40BC5D72FA9117305FCA5765
-:10637000E1D728BF0A3A5EC0FCCD1B983A86E59B60
-:106380008E4D5130FFE7E5B112E6C620FF44910E75
-:10639000DF0691F2CFDE8623D1192E3A7FCBDE774E
-:1063A00050B2A21C69CAE5F392C3AD3D5214D75D49
-:1063B000B67A9DFC3D5298785E3B84D97B95B28F2E
-:1063C0001A48FEB5F37C21273FF2731DDEFCA1CFF6
-:1063D0006FF7966F84A5A3906F6E640A5D9AF57B44
-:1063E000933BEF8B8D7FD4CFF583CF43AA15F79FD7
-:1063F000363B3F66EDF7A62848D737CDD08AF01C4C
-:1064000086338F3FF8B91D7A82F1A9EEE2FFD5B14C
-:1064100034E52767CEEFEDDD0BBA92ACFC9A2EA7E0
-:10642000B89DED9D679BAF6731E67B5977FB6CBDEF
-:10643000C19BE7B87A57A589F9620C7B7ABEB73D54
-:10644000C1FFD976EF7C87C347E6FC1D7D70B0F9AC
-:1064500028BB84ACF97E21D59B2FD5A4F278A3D993
-:10646000244360FED9E7A3ADAA149D6FB61AFD5A66
-:10647000538CE29314FFAB638483F1BD7255A77E06
-:10648000DE0F4C48039D4348CD46FDE8AFED778EC7
-:10649000CAF9F06FDDEFFC41E05DABF62AC89FEB77
-:1064A000E58E1AA178E07C40C06799E318BEFD7BB9
-:1064B00096748D034FBDF611D63B8047A04750AF71
-:1064C000461CA2BF93F6BEF5EF4FFCAB82FBF7DB99
-:1064D0008F1F5F8C72EEE61F4AA0B27A279F88401A
-:1064E00017ED3B6905E5F2EADD12AD3FC85DB3AEDD
-:1064F000F4E4DB37D1FC6F7E2A42FBC3EA67FCE998
-:106500005AD67EF5775F9B0A8C6F4F36F6BD300EFC
-:10651000F1F7B8C0F318ACDEA957B2F7AB65B82EE7
-:106520005B1EC2F52AE7ABB7BE1F5A8EFBBBB0ABF2
-:10653000FB5AEAB7F36A9FDF257F97ABDC9E66F5CF
-:106540004CFC6E7D43484F12387CD9F2F2DEFA06DD
-:10655000F7A3ACDEE34B639EE2EA5D3B9424ABB76A
-:106560007ED73B44DF0B9E7A328A7858BFC77B1EAA
-:10657000E1E6A7FED43AB79CCE3BF5D5A2FC934EFC
-:1065800053F994A9F6F13C78EE8F59471CCBEA7D7C
-:10659000FBCD4B7FC3BE9F884B106022E544CF7F6D
-:1065A0002A3FC472329C62A28CF5EF7BD5CD87EB7B
-:1065B00077BD46E78E349129B017E179888CEF19C1
-:1065C000F5999EABA03C5CDFB9E91D9497EB77BFD2
-:1065D000FD6BA4BBF520BFEAE6E713F88F3167C770
-:1065E000B336A95E3FDD2938388B1C00BBF2B3DA25
-:1065F0008B4E3CCBE1EF9B9F3CF530EA116F3DF3B6
-:106600005F0FE3FD0C6BFEFC3F0F635E2BFC28A0CD
-:10661000A1DC5AFFF82FA2E0C2FFA3B67C38F98DA7
-:106620007FFBFA030C0F277FE527AC9D7CEECD099D
-:10663000784FC7C9A7FF7714EA1F1B9F5B381AE979
-:106640006CE377168C1EEA1C28D26DDAEF5EDF341D
-:10665000BFDF608F809B20C0B3F633635DE0609F37
-:10666000827AEF7B02F46DCE65EF3BFFA4A0FEF2D1
-:1066700082097D88A77DBB5F7BE10E567E9BAD9333
-:106680003FCB3AB1F98F13697F63ECC39EEB765F22
-:1066900079C5C5E5F8F419D8FD7AE8A37DE3ACF532
-:1066A0003DCAD6B77C607D33BF9F82D30AE27FFDAF
-:1066B000136C3DA7E2BAB2F59C7AF67ABE8DFF98CC
-:1066C00073F67AEE53BDFEB853B0E69107F0E3EEF1
-:1066D000FCACF6ADB39E6BBFF3A921F572473E0C3F
-:1066E00087673ADFCBE0FA8A6AFE5C45BE7DE69BAF
-:1066F0005F7F20C6D7B99621E6E493A726E0618D97
-:10670000DFF9FAAE453CF43DE7D7508F5AFDDC2F58
-:1067100089EF4E7EE7253AD7C3FEA202DBEF4E4259
-:10672000FFDF1160E575022FACD5FB2EFD35EB7751
-:106730002DEBC23268FD2EFD7539AE9FDA47EB9125
-:106740005E52A3A3FC4D17D0BCD7A5397FAC4B77C5
-:106750002F437F7626DE2301279F70605DD15FBACD
-:106760006EF7F14B91FE065B4F67FE1ACE7F36FB4C
-:10677000FEA8977F07E5577B7D4FEE785F41FDAA26
-:10678000EB878A26323BFFA4AF4F198BFBCDD39208
-:1067900086E78D33D77D00FF8D59CF1D673E33E9E6
-:1067A000C31FC81EBF76F0341CBF0F3FBF8F86BF0C
-:1067B00053F63E9C89C7B74E67DF0FCE09707B6EDC
-:1067C0001D74D4A08A99B99FF920658D2B1A80B7C2
-:1067D000B5532239FFD62EEEA7C99417EB06B1CFD9
-:1067E000A639E3ECE99E8A72EDADBDDFB7E992D33D
-:1067F000FDBA278E2B96BD3FA45DF85D3F88BFFB99
-:1068000022BBBFF5CF66EF6FFD13EF64EDEF846C35
-:106810005E8DF09FE8F1515ED2894E29AB9D3B29F8
-:10682000E0F3E85DAD9159AFE4B076523448795762
-:106830004D8DE62FD14F6A1DF1D97E00E377986F19
-:10684000D51409D239F7A6E88D745F92D35F730629
-:106850009EE47882EC27399628E731B0B4C78EF1F0
-:10686000318270C30DB255887AFFA1A23765ECF76B
-:1068700030EA912EBBFEB00C2DF9E5782E42301A8D
-:10688000208B7F23A3FFC43C0974B79FB06B8CF8A7
-:1068900007D6DE7F544A236AEB20D545E7020AA1DA
-:1068A000F3B12CFD3D54AF93FD5C94B88EFC3FFEDC
-:1068B00054CA447DAD70A3562CEA838F3B3EE58DD0
-:1068C0005F8F6594FF071CE7808FF441D8F5F8E3EC
-:1068D0008F8FE25B0AEAE52FE093C9BF4B56E9854B
-:1068E000587EC89E37E3013AC738DE4AC828E78495
-:1068F000D81219F58B85A984BCD2B59E0B63C258FA
-:10690000DC4FD383DC03F5BD00DF3F1B1AAEA23C96
-:10691000F607BF24125D3F18B8AC10F96C7FEEEC9F
-:1069200030FAD7BAD7CE3A3899C1392E2C019A9C71
-:10693000FBC2439FDB7CD8F62FECB4EF1F7AD4CE9A
-:106940002FFFBA8DB75DF5A5F47CBCDEA0EF4FD468
-:106950005750B9B3BE869ECFD427E87DF48E60121F
-:10696000E97377FD727A3F0EDE1170FDBF5B9FA465
-:10697000F2A3815C827FE29D2026D9FB85888FF07F
-:10698000C0BC1D78D2B6DDFDBDC08F9B912FFAF142
-:106990009881EF4BA04750D17F1513745CF7BA80F4
-:1069A000CEF35C33F03BC1DF27605CAEEE4E9E0F52
-:1069B000F1B0E03DEF70BF2DFFBF6DF3E93BD1E4D7
-:1069C0009301D6CFBB35CB4A491F02AD0CE9E66136
-:1069D0002171D828223C7BCE9DACCE4B7E3BE0F291
-:1069E0000F4F68E776FDF6802DDF368288F4363E5D
-:1069F000053AD29B33EFBD957A21CAC5BD8240EBE3
-:106A00008DF456EAA2B77EFA0DD879C9F1ECFBF8FD
-:106A100000FD72FE8FCF2DBDA71AF1B241243F4871
-:106A2000137E72B5FBD0A62366B78816D2F32A91DF
-:106A3000FCB9138F1D172630F874ED9B01BCB72BE2
-:106A40003E016C7F536700E9EBC155DCBFF8B563CD
-:106A5000FC1CD3A98DC54B26B3FA8B197E30189533
-:106A6000B7A8C4E3B774CE2F7C4D4DE46843F8B7A4
-:106A700032F3DEEE9F78D707396C9C71C7423A9E9D
-:106A800087B967E28FBA15561EDB2B903F696C38C9
-:106A90003519D7B3F2FF7F634CAF6B1D1E589B9A1D
-:106AA000887A63EBC46F09C807634FFF58C07D64E1
-:106AB000A2967C33C0D6619C6C9F139653B3D12EA3
-:106AC000B8262FF17B5CB74461FAD3484FA76A36EA
-:106AD000FE3BF6EFC421EBEAF4DCC92EF990799E77
-:106AE000E2A1D4D0FE4C67FE0FE1FC87A8E7CCDF23
-:106AF00059BF5335B135281733F199D96FDEA265E7
-:106B0000438EFF907D8F189BBF3FE8A2CFC254AF4A
-:106B10008CED9CF683C55D33E7DBEF271A619CB6ED
-:106B2000D307F948174FFF71C2B70F03924E424285
-:106B3000FFD4DE40724C7026DE1F97A232938E94F3
-:106B4000CF7E412EE7DF07467D7D0CF19D9C2EA276
-:106B5000BC8F118ED702894425EE73866864DB07EB
-:106B6000A60439DDCF8314F947C5D09D43C7F90B7F
-:106B7000BD71FEAD409300AB4BB5E31F206BE80F3A
-:106B80003B00D3D10F991FE4FC5E2973FB72C60151
-:106B90007D87C4FD56D292880B7FB6DFCEC7BB6619
-:106BA00070DF099A8EE7BEA6750B2E7E7D3F949C02
-:106BB0008FEBA6C4B93FD2174BD279CB855258245C
-:106BC0007F6E0797FF759050CFE37119C079EB1076
-:106BD0001771BF7F68233FDFAE6B2182FBA1984E08
-:106BE000E53A5B4FF9B14D47DFB7E5FEF76C7AF94F
-:106BF0000ECA7DF62CE935F7E730B8BE6DCBFFA79E
-:106C00006DF9FF942DFF671EED856F94933C363030
-:106C1000EFF9CBDBE28D38CD27EB4DAAB7B37E156C
-:106C20003DF7E58E16F7B07A8F6E1477223F3FAAB4
-:106C30008DBE1CEFBB4A9BA221B0C60F59DB164488
-:106C400019FC3B5481E2670FD7A7A8DD0E556F549E
-:106C5000319EC2AC650BC9A0AE87C21E95BFEBD3F7
-:106C60006A58BDAF75E45D8E71B87B6B646AE7F0FE
-:106C7000913E73033687689E3F886C9557D0A59EDA
-:106C80008376FA4691FAF94AE033EA02F61C3FFEAF
-:106C9000887A998E8B71DC4CB1EF0B1892711E15AE
-:106CA000BDBD16964B5E0F53BEF6AC577AE16956E2
-:106CB0002E5A15A1F278CBCB175376F75A1D0C8EAE
-:106CC000F16FF1EFD579BFB73A59FD9C0D51EAAF9D
-:106CD000EAF55E01E9D957EE3D7FB5DDF7AB7D11F1
-:106CE000367EEC604240BCED15B4059812627D9A88
-:106CF0009FBF197D00AAF07D3CBA88D6615BB08841
-:106D0000E8E76BCD47E237219E36C69AD1CCD9B79A
-:106D100071039D4FF06FDCC8F5A014F77F8FBF6D36
-:106D2000BFF079977C286C96B3FAEDB605FD3C4E22
-:106D3000B271596232076F7F18F5BD12EEAF2C6A3F
-:106D4000A9F6E43539F1910F85E4B620D94D3C4ED2
-:106D5000226B297A7FB184BA227B7DBBC8F5A4441B
-:106D60004FC0ED87D16FE3F7B365C2B13328131C71
-:106D7000CD56F52A941777CF54E400C231D9BE9F7F
-:106D8000C58E43F6EF63427267D0E3B7E7708D6755
-:106D9000A80C21DC5D3D9FEE64FD7C9072F63133E2
-:106DA000487AD23D22F1C7D6727E0E709FF16E17DF
-:106DB000DE73E1F0538B2112FF6E9385B4C0FAD9D4
-:106DC000565E9C7B1ED24F0C776F9AAF8A782E91BD
-:106DD0007D3C8703CCBDE817F7A35F9CAD77C9B1B5
-:106DE000D07191FC7FDEFCEF22CBBBFE629DF7DC15
-:106DF000DD78A6F4B8F39581114D3F9DD1FE5ABDC3
-:106E0000F73F901F968788CEC032A395A3307DD1DF
-:106E1000FE936AE9FC7349C63983076CFBFD61FB8D
-:106E20001C219CBE05506E3D609FBF7E608D18D4B6
-:106E3000195E9EB78ED0BE39BEAEAB9202339ADFDA
-:106E4000935FEDBF536BC4FDB528E5CD13AACCC845
-:106E50000B2AF92BF3AC8F05BD76EADE134103EF65
-:106E6000C34B1F950CD467BF7CC70C927FD66AAE0C
-:106E7000B7A457E53D80E75DF20530F0BDD3AF63C1
-:106E8000BFBE1BCC23BE49CF61DF73985C89742ED3
-:106E90005A85EB05395A630CCF43DF0EDFC2FE572C
-:106EA000F1F5AF2C04BA5FA7300674CE993D379F39
-:106EB0008BFCBF51C498389C41398F725CED7911BD
-:106EC000DFE75E2ED2FD3945CDD67938CFBD73C709
-:106ED0008E45FAD81AE6E75E9A841468086F01E7CF
-:106EE000871D912ECA07BDBB468446A428864B0346
-:106EF000FB5919DC49792C08EF4CA23BD2BB304638
-:106F000081FC685D1FE4FBCE69EB3CF42B4743BD7D
-:106F10009DFB583FE136C5D8C9FAD951E9BDA76EE6
-:106F20005288EF778190E0C4F70321F634B702E589
-:106F30002DB2B9107F33BEB280F6058DEC2A27BE84
-:106F40001FDDBB482C9AC29FC52EFEDD69CBD9B48C
-:106F50009DB7F0B0BD7F38FAC603B6DDB0D5DE37D9
-:106F60008ACC2B1A15A4DB55300DF154B2A6535818
-:106F700099CDBE6FF7CAD54C7E9998C92F29EF39A4
-:106F8000D571AB8A3DDF23C6F99EEF148AC17567C0
-:106F9000FB37E2B92D5026A1DE370312A65BAE0CFB
-:106FA000B6FFE707CDA9A18FA0FF44438914EA9F4C
-:106FB00099FAF745F6BA5C1B48CCC1F588CE5D4E10
-:106FC000793C6B03898BA87F392DA03C9D87ED62AE
-:106FD00059E1A5E4AF11C05BFD51E005D9A0F35C18
-:106FE000B74BCE7DB6DEF35C90717F6DE6FDB4F3FA
-:106FF000FF7827DD4FDB2230450FCB39F6FDB47E1D
-:107000007E3F6D4B84DB5D2D761ED53A1B0FD785F9
-:10701000F87DAF6B6C3A9D1FCA7EFF91E3F74AA1E2
-:107020006CC07AA3B3DF3B861A15F6377F5CF6EFA8
-:10703000A9108F3BCE9F38F4381B701CD6CFACA064
-:10704000B936E4F2AFCC0899EBDDE55B43767E918F
-:107050009C20BDD294F97E581434378666BAF06B02
-:107060003FF31695D379BE53F6793ED66EBB407882
-:1070700095B491E0DDD1FF5B04FD1E9283BF607A81
-:107080005F96F5783F18B5C49C817894A31FED0AEC
-:10709000717B92D1DB263E8F34E5418741BF07EFFC
-:1070A000811887F770EBE85738F6F0BFA2BCBDB87F
-:1070B000A706F5A7B53F90E87EBBB3F0B586D19D96
-:1070C0002B1FC5793FF6837164074F9492F7875C55
-:1070D000F6C7D8557D0AD23BC25FCDE1E7F9D3426E
-:1070E000FA3C6E0F00C5715A6E8A7BF20933ED913E
-:1070F0003CBCE780E48A427A5D265C8E3DE19433B5
-:10710000CF231CB2E908FFF451784F38706556362A
-:1071100025E4AF9990A4E76CD0E9C9EC964E9C07A2
-:10712000E33F1DE16C0C4DB808E7F177C4DB8F42FB
-:1071300033FFF1F0E6D07151F2927E3ACE76FFF550
-:10714000FDA128C9DBBA6311D2FBA37BBF48742D14
-:1071500031BA0EC406F265EAC0CEA30F4327EABDDA
-:1071600045C97A3A177A8AD131F62B69FC1CAB0CE7
-:107170005A02E336528CF3874F2ED5440DE3B29674
-:107180001FF30EAC623050D6A23FD20D6F7938F9A2
-:10719000A61B8FB71FBB87E4EDB581E4095CCFDB8D
-:1071A0004B2C3F6A762E39FC965B0E0B10D691FF66
-:1071B000E69FE6FB65655297911E16304E47BC2F41
-:1071C0008424952F038B9E8B204DCF4FE09546A4B2
-:1071D000C7D9E716BAAE16DDE716FAF3B9CB9D7C30
-:1071E0000E1EA72AB0E9106C3BF5F9E54B1B16B251
-:1071F000F1D9E29B188FFAEA729ECFE39F2DD3F963
-:10720000D582DEEB6B314E04CBB85EE6E441E4D5CB
-:107210007AF5B4B3EEB73AF6FB63D82EF39C9CA391
-:10722000AF65EE5BCE33535FCB0B673F3F39D8BEC4
-:10723000931957A8C37F72FBD5B6AB1339EE7BE326
-:10724000339F87EAFB9AF7BBF2CC0FE3FD4659F771
-:10725000011EEF8DEEFD7DEDB272BA5FCEC094C916
-:107260009EFAAEF9AF4F1AB08313F3729F477F7443
-:10727000A23A77BAC4F0BE38FE5EF3FE7C80256683
-:10728000F7FCD75DF3ECD118B459F484FEF14CDF70
-:1072900087EEFDF76D85CB97167BBC881D1F6B13A2
-:1072A0002D3FF1ABED7FFB4321B7D31DFB3EDB7CD4
-:1072B0009B095FBD61A487C1E6FBD930DF4F472D35
-:1072C00037E8BEFC26FBBEFCA6F14EFE96A1A13E11
-:1072D00079633897DF57102EA1F86A53F71CF2270D
-:1072E000171CF4913F7DD4B2A460B9F6C57BEBB90D
-:1072F000FFF52B4CBFC37C902D4CAFC3F2DECA59B7
-:107300002ADA0BB746A653BC7673BDE1C917719E46
-:10731000781F5DD2E5DF6B4A546918EF6DAE9DAE04
-:10732000A2DD217DB29CCAF279D33BAA183F7F66C9
-:10733000EBD44B0B302E51C6EF23BB8E951B4A98D6
-:107340001D1DE6FBEC21E3F530E2A92AAC3BF4433A
-:10735000EBE85B96347D2817E25A15E6CA38EFC190
-:10736000A62FF69EF4EBB795E44D6136FF43F6BDCC
-:10737000586D4AAA7443199E8B670207FDC42AF709
-:1073800013221D34CF18807B838DDFB9F6B84C20D3
-:10739000894FBBD64F89F3F56B136155B6F5B933F9
-:1073A000CCF59B66CDD486A4234DFED0737F68793F
-:1073B0008CE7E7C7181DB9F8F96C7AE7FC541E4E44
-:1073C00034870B502E42698AE61F26F943EDA481CB
-:1073D0007B2CE361B31DEBFD2CD7CE872EE479D057
-:1073E000EC7D6B0E96E514C977471F6C93B93E3759
-:1073F000527D306FD146D207DF65AC45F6D92737CD
-:1074000092DCDEE853E9FEBFBDF3648A6745CF81B5
-:10741000EBDC768B14B1EFFF8F70BF3CFE4E427AEF
-:1074200032D77BF09C47340474CEA56F3CCF2F6DD0
-:10743000831D35E7107C9334F77E56399EFB19EE99
-:10744000AE0AAE72FB1BE6E4F27C91FDB995BF4734
-:107450003A280BA7AB90352FD0A017F369A08A9FCD
-:107460001F130AF9391B1F182AE7D76A0DEF0D15EC
-:107470002049E7CF065D3FF0DE2FFAB89C6E0C2264
-:10748000DE62DCAF13D92E50D29ED46976E1D99D4D
-:10749000C6DCA53F0813BE1306F277F7AC20D97BF4
-:1074A000EF752B647FBE7713FC06FD49EFF972C0C0
-:1074B000624BF52351FCCD536CBE7D8C597762FE37
-:1074C00097C6BF4FDB2A90BFE9471F06C721BD1BE8
-:1074D0005110F1F72C16337D8227094208E3B3D10E
-:1074E00005D07509B6EF0E13FE7CF19FCE7F7D06A9
-:1074F000ED3F21B102CF6B890FE2FC9F89431EB69D
-:107500009FF1BF5512FAAF1C7DE81E2D7904E19D55
-:107510000DD6AA6ED6FE6E85F3D7DD794A1AE394AE
-:10752000D30B44D243C0174A4F62DF171F78BD1AEE
-:10753000F33B17574CC39A383EADF7442D790CE90D
-:10754000AF5A5B529DCBEA971FD549FE5E1ABF65C5
-:107550003F96671DE3659F9FEBF1A8C7B8CF072C47
-:10756000FE6002CDEBCD30D7679BE3668F290CC957
-:107570005719F7F27ACF173874C0B6751DF3D2E9F0
-:10758000DF3AD145D2270EF89FA0C2B0CF9F38F482
-:10759000600A1F851E7687F9BED086F966B1817CA8
-:1075A000B3365B7F1B69BE59263FE52D92691DDE10
-:1075B00065FA16DEE771369FDC42F77F66F29303C9
-:1075C000E7E6F2BC18CA61876FB4D977925CF65FC0
-:1075D000AFD07DA60E1F39FC332BA79F8FBE82F242
-:1075E0006259585FC853344C70F3C995C3F0D562E3
-:1075F000E8DB1F63E5C53258394C041D9AF3BB9292
-:10760000092E3EC9C4E7E27902BCEA9183BCECC210
-:10761000B7D67F0F70163B79B0753922F3730F0E12
-:107620009FE2EFB1E0F9B176D100DC8F1A73571AFF
-:1076300011364FB936770DF2C3162191427E88CCB0
-:107640007E2B7423C3FB7BA3981689FE437DE553F1
-:10765000C4EFAF84C82EBB7BD66A8A4BBD7753720A
-:1076600022EE2F9B18DE5FA5FD3C3D5AA45CDBDEBD
-:10767000D13C6F428FF36732CEDF83FD3D6D974D76
-:10768000BB5E2FD563EBEB919B07A29C0F0E44F9D9
-:107690003EB549E950911EFA8A54CD9DAF7C897D53
-:1076A000BFF0CD113BAE78BA49C7F8C4CD11DEEEBC
-:1076B000DEFA4ED25736D5EFA1677E6D1A303F2ED7
-:1076C000586AE9A857A87F5E20E03E0BE7F3783BB5
-:1076D000BE6F70E96B9FB2E5B68AF700B179AB8DEA
-:1076E00096EEBE77561585ACF703FD24CAFDBF6A3A
-:1076F00023D07775EFFFA3BC84FC1243F81C961BC4
-:107700003BE87763025DFC7DACC4146E70F51BAB87
-:10771000EDF4EC8FAAD82B933D54079A85C69DDCD7
-:107720005B8D7EB7F6A5C10ECC57CEA423FC7BD5CE
-:10773000450FEA9FAF24BD088E70BDB4BA5825FA34
-:107740006DA95376A05FEF0FB12ACA536FB2F196BD
-:10775000391F8CAB334D8FFC64969FC7D7ADC93CA6
-:10776000BE8E658CAFE313E3EBF8C4F83A7EC7F83E
-:107770003A96BF556F5219E3EC58C6383B9631BE66
-:107780008E658CABE3734FFD2A7AFEA03E45DF9FEA
-:10779000ADAFA3F225B6DC8452FE3B5FED5F544CE7
-:1077A000CC8BFAA1BD3EFBCCA5AB7E8E7E40881A69
-:1077B000B85F070E36BEF213BB4CF75FC78BF3D131
-:1077C0002F093111309ED01ADFC674CC81F905E43F
-:1077D0007B41A778BAB50AF31977460E5D2A33FDC7
-:1077E000A1247E4B551E2BEF8A1C6DC5FCD173F571
-:1077F00086E53B5C653D327DF5D3DA407962D90E92
-:1078000039C8BE3F79F7CBAD28070231AEF77D2FDF
-:10781000F2AB4B1B1849741533C506E558919246D7
-:107820003ABE01D76912CE83EB2D9F80A638E6EFD2
-:107830004DD495E9C87FAC7E17A7FB91D5FF2106F3
-:1078400061669EDD6EA87A62F988EAD1F9DBC1EA49
-:10785000E17761887E5AA049EB61B06FF1F1FDD507
-:107860002AE0FEDF761FE7FBF6007F4EC8E1F4F763
-:107870004EB4EAAE287BDE15E5EBDB1EE0F70EF436
-:107880004D11E9F778A04EF827ECE70B6341C3BC34
-:10789000C7E9538AF351FF3F62D3C3A48911BE6F76
-:1078A000FFB34AFBF665139F6CCE63E549FF6A1888
-:1078B000B80F6F012388F7B65A5B45CA23FA66F9F9
-:1078C00039794B58F50B667E270FF5DEE9B6DC49B2
-:1078D000DBF64943CB8D13D13E78EF252EF78EDBB7
-:1078E000E3ECF0F5A4683D6786E91C054007E9254F
-:1078F0000D7199F2BFC431FCA9F8B46BE85ECC16E7
-:1079000085EE6152FE345B257FEA077EFB1EE21E98
-:10791000D257944052CB65EF3B2C91FC0F4D5A301F
-:107920008DF7616D094FA7DF65B0CA648A876D293D
-:10793000E3719D50E42ABAEFEA2BDD01AADF12566B
-:10794000290F385DB6FB40550C9FA286FB7EDA5CA2
-:107950004AF7535A9AA8513E31FB177D5F13233FD4
-:107960000F9D2BC6EF6B781CC237FA20959B3EA566
-:1079700051FF60E7ED93EA25E2EF4424BABDF7CD6D
-:10798000F6FDF442F483ACE6E752A66A4BBB9F6374
-:10799000DF9B4D3551CCF8A1457B776F08CB2B8011
-:1079A000E2A4A129AF3786B0FE0D9AC1F3B0F83931
-:1079B00008B0EF376E2E5BD6FD1FD8FFF2104C32A9
-:1079C000B07EB58AFC0ACDF002DE475568EB33A1E4
-:1079D000DCE902EA632DB574ED2683CF7B7EA03906
-:1079E000EF7215E9465A9C47E3B480A9627DAB5615
-:1079F000A67DB130AC76A1DFA0D0F63B38F2203FB7
-:107A0000E53A47C0FE37768DEC396730FA066FB934
-:107A100020E37EDD0B6DFAC9C45BE63CF363CFE483
-:107A2000223CF96BE844C459F0DF1B9BBE04E735E8
-:107A300046DB2BEC28279346D3F17E714835B8F30B
-:107A400030FE5A78A79635F7203D4CD565D0195EA3
-:107A50002E84BE46EC7F8B4DFFED45DEFDF9886D33
-:107A6000D7303EFD7C7426C63344B05CFD63BCC396
-:107A700072C1734E7B9EA73CA963ACA7FEE4EDC523
-:107A80009EEFE7A5CFF77CBF60D7744F794AE75CDC
-:107A90004FFD0BF75479CAD3BA2EF7D49F7160A962
-:107AA000A73CB3E71A4FFDD9AFACF47C9FD3BBDA48
-:107AB000F3FDA2DF6DF0942FEEBBC353DFD1EB33A8
-:107AC000F7CDEBA37F993E8FBFFBE33E4F9C692F21
-:107AD0009C756FCE9F9B748CFF4194DF932BE3FECC
-:107AE000CECA1BBEC8ED2E75BEA1A3BCB9DAA6CB0B
-:107AF000D579E63A94AF955195F60939CCEBC9E1C1
-:107B00004B491F99B09DC9A919648FF57FC7387477
-:107B10007BBD35BFC4E5AF0A681D80F95F95D11AFA
-:107B2000BA2FD0692F6B26605EDCD5519DDF73C301
-:107B3000AC59BA074067ED5DF362F61F5D1DD1C712
-:107B4000EC43D4EBFBED3F3987E2BECCFE23FBD008
-:107B500008727B104E4BF4DDF88A40F7F333FB8E4E
-:107B6000ECC367C2CC3E9C86F658EF1694437D3F2B
-:107B700093298EC8FEC8FE2B67F6DFE65CB71FBCF4
-:107B8000B7089F69D0C6E2B35BE9124717913D7809
-:107B90001FD2F36736BEB40AFB9D52CEEFD56B1FE2
-:107BA000551B473DB9BDA893F8A4AF48E6FB909C90
-:107BB0002875FBF77E6CAF7748FD26D9A16C1D4870
-:107BC0002E3BEBB045E84DE3FD85D61783E4EF9EF1
-:107BD000F05BFF11E437B5581D87F97FC63EC5C479
-:107BE000F1EEB5F15CAC4DABC29F792C892FD98BEE
-:107BF000CF7375A68FB06769E93D7BF1F974949FE7
-:107C00005F3DDF78BA0A658C3A9FFBADE5A94ABAB9
-:107C100051407F3383238BDDD1EF9F886EE7F7FDE3
-:107C200094C86F20FDA1D67F864DA1324FA5B871B3
-:107C300000E942A027D153400ED1FE12C043A858FC
-:107C4000AE10D218EA42FD15F3412BF3B6131D38DE
-:107C50007A2DEABB496E1FFF18F11AABF5AE7F48CB
-:107C6000FD16E1A9D93EEFDC9EAB1FAC62E3B6176F
-:107C700014E7A1CF16FD294B5CF2679FBDEF3E9242
-:107C8000237AE4CF6CCC519839A017317ED82E9E40
-:107C900083F02628BE1E3828913D1FB8B3837E5F2F
-:107CA00035A0593A90FE6FE9D86F75F172F2FFFD79
-:107CB0004F6C3AE9C181BA1F65C55BA0570273C614
-:107CC000E0F88C9EFB00E903302AA8E33E5B170B2B
-:107CD0009A3BB2D8079F8D70FFD9A6098E3F3341DA
-:107CE000E75D5BD0DF16C6AD4D15314FE7D69F156A
-:107CF000EC74DF07716B01F74F0E367E80D999491E
-:107D0000177C9B58BF28C75B4E2FA9A1FB54719BC2
-:107D100029C7F3A0653BC84F6FDB4B9FB5F17A7362
-:107D200084E37182020B76A03CC963FA114369A512
-:107D3000ED5771FC2FF11C1ED7372C90B85FCEE7A2
-:107D4000EC5BE219BC8746075D99651FF127159822
-:107D5000EF6BECFFBAF15CE039EDAE7D0E703FF0F9
-:107D600096276FF796CF4B7BCB4C8B7E19F58065B2
-:107D700000DCAFB1CBFB3D0CA60FE328639DFBF30A
-:107D800013FC9CA0CA2040FA2EEB4C777F8DCD2FA0
-:107D9000E1DC7399715FFE94DD69D25FAEB07FCF95
-:107DA00023F31EF7B1F8FB1E53695E9E7D74BA4F34
-:107DB000227F03FA890C979F68A2A67BEC2AC7DF73
-:107DC0009329D783C7EE01F685ECF5A41FEF43D5C1
-:107DD000CAD0AFD05A78D76F8F970FF8575AE5D4DB
-:107DE0009BC7C97FC9F4AF18F77FA05FFAD69FDDA4
-:107DF000F6DFC75D7ECA77A2C9A9E8CFB87F226F38
-:107E0000EFDC97EA9CE77BB7467E5ED0391C4917CA
-:107E10001CB7975A977175253D06FD438E7FC5F1B6
-:107E2000235C9367DE857CB7C53892DAC7FAADFA72
-:107E3000951FB09F85D2C103F528EFC6CB942FA222
-:107E4000CD5EF34810FD99F89D95AB8AF4D1C41F1F
-:107E50002FFAC89FD066F3BD732ED5F1C77CC2B68A
-:107E6000032ECB71F4282B689FC708A29E7CC12EDD
-:107E7000B6869EFD90FB031DBFDF944EEFF7F3F136
-:107E80008837F93D77507E933187E7378D5A9EDEEC
-:107E90008BEB7CA1BDCE18B7AA9C35103F1DBD222F
-:107EA000BD17F5D0A9769E52D98BCFD34FF9825406
-:107EB00028217D9D8FF949AC9DB15FF69C0719057E
-:107EC00002E5F98C3A2A1969D6CFD467BDDFCBC059
-:107ED000552E42F8BCE5CCB81453B7DEB95EC0DF0E
-:107EE000454D0928CFB6AE6036022BAFCAB1F38B31
-:107EF000CE8573916E174A6103EFCDDBF00B89F2EB
-:107F00008BFDC727FF12E3A3F012CFA7D4CEE1F178
-:107F100056EDA792C12420682198362D3C10C7FA4F
-:107F2000EA1903EFD0EFF78F3DCED61DF7A12798C2
-:107F3000DD5FE2433B5EA37227B3FBB1FC0CB3FBF6
-:107F4000F1B99BD9FDF8FEBBCCEEC7F21E66F7E394
-:107F5000F307CCEEC7F7CF32BB1FCBFB732BC91F88
-:107F6000DF83F7194DC6DFB5DD4DF98C6DAA4F43A0
-:107F7000FAC994679595B7AACB187E378717521C14
-:107F8000A56A21CFA76FCD5948F674BF9F2EC3CFE6
-:107F900039E0B7EB151CBF1D1E6D8EDBF66CBFFF05
-:107FA0003369D0BD05C3F7633AFD90FFF4AC7E6C36
-:107FB0003FEADB5FFCF5D79BD8A7B533B7B5078B96
-:107FC000F13C4F8A7FB7F30A337F4F6BEDEE06CA61
-:107FD000F353C61C4DE1BAEE2E0F93BE81BFB7849A
-:107FE000723BD34E74ECC34C7DDC7966EE87997995
-:107FF00030115B2F192E2FE36E5F8AE2D656039362
-:108000002FB85FD4A7E7BFEE3BDB6F3B56CBCB3837
-:108010007FCCF3AEFC07783E5E3B2435F7FC9D73C6
-:108020000F64F31573FFA1DB6F1B2C49D3BD0CC18B
-:10803000B049FAA2C0F448D22BB524C5015B07F9B8
-:10804000DDEC376D39D130E62ADAEF5B5FF491BEB3
-:10805000556DE7BF358D51A9DC3466569CF2262359
-:10806000B3D4DE2CFD6C88140FB9BF4A6CFFD787E0
-:10807000D8FF253F3FEFD5B4778E8AE7A2DAC32B2E
-:108080007BD06E6F8FC7C8FFDF3D6696E7DE712934
-:108090005E41F7544861AE674B7195F46C19E75F28
-:1080A0003650DFA9B72F87EF238CCDC98F190877FA
-:1080B000503DBF9C30D1DFE28FF1FC62BFC6E3854B
-:1080C000C11211D42CE7309ECDE1E7ACDACB921A85
-:1080D000FA75DAE3329DE768D7A70F166F25BDE87A
-:1080E0008F3982877E9B6CBF43D32A85F4C2445D5F
-:1080F000AE569D4FE711FA90CFDBC38D2AC65F9530
-:1081000031E543F6AB68BCDFFF03837E3D1F008093
-:10811000000000001F8B080000000000000BCD7D58
-:108120000D6014D5B5F09D9DD99F24BBC924BB9B80
-:10813000ECE68F09241A34E026243168C449083C4F
-:10814000F4212E021A5A2A1B1045050968EB6AB55C
-:10815000D9908010A4067F2A4F2CDD58B0F6ABD6FC
-:1081600068E92BAF455E50E4F9839AAA55B0A8019F
-:10817000ACD53EB511A4A5EAFBF8CE397726D9993E
-:10818000CC26417DEF7BD832DC99FB73EEB9E7FF5B
-:108190009E7BF7D429F87321636D7B52545609CF27
-:1081A000A58E784A1163E1687976C324C6BE951519
-:1081B000FE22C3CF98C3B3488EB919B333A676C392
-:1081C000F394D64E7F7A658131A827CABF98F29E74
-:1081D00077E877FD29A66F661168CF8AA5F7FB5C63
-:1081E0008CD914269CB24199B9E5F7CF66F4E7948F
-:1081F000887FF706C29EE4FD785CBF9CF2DEA4A1F6
-:10820000ED9697F5394485B1F5DB3AC30CCA9F0B5F
-:1082100050A842B8636A1ECCEB869D2B59A48CB142
-:108220008D52AF4B0638367E292C0C970DED7F31E1
-:10823000CEA70A7B95620827FCB19D3A07FE5698A7
-:10824000E2A8662C0FDF8CC527FF0EA3EC3905FDD5
-:1082500097F740B9548307FE3FE93963B9AAD75865
-:108260003EF780B1CC58C81E9EC0D8EB2DD0E999FE
-:108270008CCD39F4E12196CED8DC58E8D9A77C8C96
-:10828000E5AAAE705C666C1E0B3DFB3694F31AD308
-:10829000584F0806B7B1A5B82E30CD378B01BE4672
-:1082A00046B0B2BCA5A98CB906FB9F2F67D23A3560
-:1082B000F635CD641319FBE1AD6D8C413FB17A21E8
-:1082C000BE1DE09FDDB06DF638783E50692B781802
-:1082D0001B45ECEFE1FC5CD0D929986FA66DE598C1
-:1082E000B1503F3C354D68837A3F3CEFACF5C5500B
-:1082F000EE9D5E1242BC03BEDE1B980FE07F5E98CF
-:10830000B7D7C77FA5F2D8DC71F0DC52F9E46C7CFA
-:10831000CE49AC0FFDCDAAE96A75407F972E532A4E
-:10832000B0BF7083B17D5EADB10C90F3F9C0BFBC3E
-:108330005943E11D091EF3F87A7F0FB428847FF6B4
-:1083400025D003E0338C9FA07D58EA974280E7DC7C
-:108350005A418D03DDE4A982DA65C10F1D1A3F98E9
-:10836000F12FC63218F259FD3C31DE0155725D76AF
-:10837000C27FEE4C21AEC0F8B94BFB7B4E41F97287
-:10838000973D2EC2F7ACCC6E01BF3FB08CB1CE2270
-:10839000022FBD2E617D1F70ADB117C2F7794191DB
-:1083A000D9800E58ED381A8FE0184BF838C2F1E139
-:1083B000227CE42D0B3DFB6318FF8A1AA72C42FD9B
-:1083C0002B1AF9771DBE8D12D0197CDF0874162385
-:1083D0003A938E24E267CEA1E5CB911EE798DE1793
-:1083E000435D9CEFC7930F9C5108702D173A67A40B
-:1083F000012829F666C670A1018348D73A3FEA787A
-:108400005ABEA395F83181CFECA7909FF1DFD984B4
-:108410001AE2B3A75DBF92516EECCEECDBC2808452
-:10842000B7CA2CD690CFD8BFA7F69F2D4079BB7C7A
-:10843000F9BA7517C0F794FE5FB072C69CCE6FCFC5
-:108440009891504E4DBD86CA3E6D1C98428CAFF738
-:10845000C0B8441FFF2973F836A86C930865C92675
-:108460006F0A150DB6CBC276C230EDC26C9364D1E3
-:10847000CEADB7033CAD85F54BD5E695AA7DB76982
-:10848000F0248E2F21DE64C52DC07A48D32519E94A
-:10849000E5EBC2913DD2BC236C937DDCD0760076B7
-:1084A000AB0EBFCD1AFE387E4F1CDF3E0CFCDF3416
-:1084B0003E46EACFA17D3F6DF8A0FAEAECE4F34531
-:1084C000B8ECA8AF14C56D4BE8E7AE3DFF78F11CE2
-:1084D000205E693E0BA5401F925D954340E765F223
-:1084E000BD2EEC5CCA6C9023C00FEBA1ACC2FBF5B7
-:1084F000DD9D2E05DE9715DFBD0E89BEAC2795A14B
-:108500003C98C0E4CC47A1DF09B2C47A70D52ED81C
-:108510006B4B8332BB84854AA0DF8C3DA9244F324C
-:108520008BCEFBA900E36666BA546C9F9659FD5347
-:1085300046F4C11429011F6975AFD7A7215CB3594F
-:1085400008595112E2AC0E996C3CF0109433A76DAF
-:10855000630D50AEF8D8A388C8D312D7771DD81EA4
-:10856000F5743BDB87FA25A8C99F750E7913E98F4F
-:10857000EB2486FA236DC2BD02C2F3007425025FAC
-:10858000969565CD6E8072D97E5B4851703E9D4256
-:1085900021CE272092DED2F1A9CB918A4F7B38D30E
-:1085A0008F67F1ED007FBB3DDE83F22A36F90A7951
-:1085B0003BC0937B5582BCC6BFFA010708EF4B97BF
-:1085C0006DEF2842FA96DE4BEC2FE3D3780FCA33D7
-:1085D00056D718C6F6BE999241FEA76AF22CD5A4CA
-:1085E000075AB2EC24CF747DC054499161DE8236C3
-:1085F0006FF68330E903270BB91C64AF2C203B4492
-:10860000607DC2A934983F5644B80BF83C86B4AF9D
-:10861000E6ED5920E4423BC799DADC8CF5E163567C
-:108620002B2057B82E5545FD2C38982B5801F3B602
-:10863000B14837D049ABC0242C0F8ED7C3703CA7AC
-:108640002BAD1DEDAEA75D6D36C45FDB73A03F6043
-:108650001E77D85923DA056D72C89505EDA39AFDEA
-:10866000B6AA7C6C0E963380B67BD16E90C232D2A5
-:10867000E52A7F710E83F7E9DEBE6FA39CFDA7CCD0
-:108680005FCF7015801CAD873AE781DCDFF4F8BA64
-:10869000582D8C77328F2909769E536A66684F3938
-:1086A0004F161ADEF7B4C08CCE1C2CAB6E5B038E5B
-:1086B000735DA64278AD63723BB6AB03642809EBE9
-:1086C000E23C1964CA24ABFEF30DEF7BC04E529C12
-:1086D000A3E93F8D29A589FD8F4BD2FF19A6FE6521
-:1086E000CBFE07FBF51AFA5D2331B2A3633E37AD2B
-:1086F000BBD92E589D59BF2213ED51276BEEB6B052
-:108700003B5B336D04F71D81E65E15DAD733607C81
-:10871000A0930BBF3C2232B26760A5805E58BED4E6
-:108720003F40C763B11EA75F5B4C6028972E94EC57
-:10873000063E99C28C65B35D54026B8DE3DA3C95BD
-:10874000BD483FABFCA98AD3027EFDD9DBC2A6148B
-:1087500097C07C53C34B19F0F10399FB5C6B02503B
-:108760004EE774F248E61F67A0BFD02B70FA5BE3B8
-:10877000B3115EC2F5395D6242BF61072B41B91882
-:1087800046FA76737870FC5E7FFE431D16E383D84D
-:1087900035D80FB355614A71C2BC7A353B7860BC9D
-:1087A000A9795DC80703E33959158D2702FE13C760
-:1087B000CBFE6AE3FD1EE7573638DEECE9C6F9CD9D
-:1087C00076C834BFD91AFFEAE3FD1EE757F415C691
-:1087D000C3F9258EF74FC6F9CD76CA34BFD922A783
-:1087E000AF81F1B2BFDA78BD2DA56407DFE100F9F2
-:1087F0000474925ABEC3350EC6BDC365970565B0F5
-:108800005D5DDD8DAEB9A87BDD53A7FB619CFA6988
-:108810005039177B993ABDAE98B14D02A78BFFDC5A
-:10882000F4E7754817C767AE2A257DA2D9D79762A6
-:1088300055D0C7974A1CDE59F9EE786B021E1F000F
-:1088400039A2021C0F02BFABC08F5B812FB11C6F1E
-:1088500009D0F321B0D7F1B90DE0C5EF0FB784A867
-:10886000FC484B0D3DF57E4A6BB8DD3EBED6DA6E58
-:108870003F238BFB7D9B82F2FCAB50AFD5A586508E
-:108880002FB29AF3999A6857B3E6A753E0FBC6CB89
-:108890005939EAC6333673B87D0DD964B7A796EF58
-:1088A000ED6D81F21D925D41BD7C87C26658F9CDA8
-:1088B00045A867AAD05EE5EDD9F9DC0FF385FBF694
-:1088C000A2DE9B83763AE0D53FB76F2FFA7F978180
-:1088D0005D4E7A991DDEFB367C7F1DFCBF0E2C8B16
-:1088E0006E264379D61C3F8D0F7FD2EBB2D17EE747
-:1088F0007FEE99798CFC8A700AD70B3E36FBD93D06
-:10890000086FC8A1C4A93F765F18F940B52B1D2494
-:108910000AC276D4D37ED4D3F0BDEEB093D910BEC4
-:10892000690E926B73E71AFD864D293D32DA3F9B43
-:10893000CA7DAC15FABF6CA6F1BBD3C9F92D6CF298
-:108940001B6699CA2021B9DF2D2EC8407BFF0E7C03
-:10895000357928DEA2875AEFD89B40A779591E1F88
-:10896000C501CE6067A03C3BC1CAEE6AC08FF95911
-:1089700064AC98DBFFBD2576C75E40FD2B28F7AAC7
-:1089800090BEB9DC18CA1F1C9EC95ABD075A7AA7E7
-:10899000BC5732085FAE1417500FE42D85F709F36A
-:1089A000957C7101FD1D263E5A8EFE8D791E0F08A5
-:1089B0008F0699C578FA339749EF235E7029519E47
-:1089C0009BE73B79C87C6B5F296656FCA46C427BB5
-:1089D0006ED67362A85519C4873EFFFF69BE3AAAD6
-:1089E000E919A6FA580FD0CB2B40EF1DDC8F616838
-:1089F000A7EAF40A15C87EBAF452F88E74A1AA0543
-:108A000088CF57C6F66FBB1ADB81EC68437F57B738
-:108A1000837A0EDAD00EFAAAFD5E7A9D83EC2DC61B
-:108A20001AE4F74B07FB4BB63ED8EFFB09FA73C0CD
-:108A30004EC43FD59AE843185B4301B2076E01FB71
-:108A400018FDFD68C387523AFF7E24C14EC53F47DB
-:108A500012FA6BDBF3734101B8BA5ABAA7BC674F7D
-:108A600090174B65DB1AB4E75AE302C5217AA01EC2
-:108A7000D80363972AB676C0FF55D80FD2A749AE60
-:108A80008F6D877E12ED94DAB9F2A3400FED65F594
-:108A90009D2178AEDFCCE3657AFD81B8992F46FE43
-:108AA000B99D353301E074A4FCE0277D301FB54D3E
-:108AB000622953A06CE7F60E7BDB4372417437FFEB
-:108AC0000CBF076220B770DEF5CD8F63396663E1B6
-:108AD0003678DE9FC6DB472597EC0C619CA47D06AB
-:108AE0004E3F3318B92F0BF0B7263B95E4A0E31D9A
-:108AF000CF4328A71C99154BD1EE5910FD7E18E3E2
-:108B000091B2972D0C5BD0D702CD7E8867F1B8CBA0
-:108B1000217B4F4126C05D17AC8F63BF43EA477F7F
-:108B200040FD4D11ADEDB09D5A3F5B6CD672E10931
-:108B3000EDFB15CB9FFCF061984F5AB13B84E4B636
-:108B4000FE1CB643B00DADBFCB1FE94E8423A55824
-:108B500096280ECABA27A33DB7FE8B07BB1F079402
-:108B6000677DE126399B257AE24291A1FDCEACAA30
-:108B7000A1ED77FFE38D00AECFEE1446FA95B11765
-:108B80002F427F72E34099C5048C73666AE5D8234F
-:108B900017A986F2E28BEAB08CB40B4439F99EEF48
-:108BA000AE8F617B819759EC7BBCBE9DD7CFD1BE88
-:108BB0004FB9F8A39FDE85FAA0DA417EE846CD0ED4
-:108BC000D2E13BDF2B12FD9CEF1D1E8F0735B9E074
-:108BD0001A3D1E0F5AE17177507D0BDFA7B06E0171
-:108BE000E938E50BD74DD8FE5F5A58F82A807D8BBF
-:108BF000B2E3E77729D4FEB0151ECF0AAA47B0BD6D
-:108C00006BF9919FDE0570787438CE65372581E366
-:108C10002FC3ADE78E6C2EE7E6F9B8DEC8D2EC4D77
-:108C200087A337301B9E72E58F6E9441DEAC2DEA30
-:108C30006EB48A3F9FF0DAA85D6692787B8697E3F0
-:108C40006D574EF87384A35D7ED285E3A70A2C8C02
-:108C5000F537D4F43121A1DFB37D7C1D006E9B1765
-:108C6000DAA54E662AD2998779E20CE8CC53C9E19D
-:108C7000DF10789D29D0CE530A4F37BEEF23FE4731
-:108C800097830B351074507668F491714FC745483F
-:108C90000F59A24E6F791D482F0E9B5E3FEF622C3D
-:108CA0007765F172B92FAF23960F7AC6016D502EFA
-:108CB000E43AC8DE31CF2F4783B7C3AFFABD7E0B8E
-:108CC0007C3AFB689D364E708462B0AE536CBD8DAD
-:108CD0008BF1DBC56EB2D7E07D633C61FED3353AE4
-:108CE0009CEEE5F6D6C67FB81AE316EB918C4E27BC
-:108CF0007A4F9B4E277AADE9F41CC47F029D7EC655
-:108D0000ACE9B4DAAA3DD0E9B956F8309745A66E79
-:108D10006E0200A5CFA73F72176AAB7FAEDDFC38AD
-:108D20003CA77CE196BC50473C83919D687371F9E8
-:108D30003E28F723D3B07F496EA6F7A23B4CFB3504
-:108D40002F65F1FE87F47B6EF566945BA3E8378CA4
-:108D5000F336F73BC6CBE19D72B13B12B7C0FB497E
-:108D6000AFC4FD521F1F3F19BF94FAB8DF9C945F38
-:108D700074FACF0947108E91F8E5C2417E593A3A0C
-:108D80007ED941FC9256C6F9252D09BFB09893F8BB
-:108D9000636D112FDF728F8FF861807F622546FE31
-:108DA000899518F867DABD2554DFDC3E1DE76D8133
-:108DB0009798579F47B805E7A19E2DB78B646FF42E
-:108DC0003194535DAC7F8F13F9B056086D87B7B3FC
-:108DD00062BD0D2E05BFF7B2D9607FACD3E87E2B04
-:108DE000C283FE50B516CF927AD9659EA17CECA9BC
-:108DF000EC298D24E0BF40C3E3E5BEF05D387E176B
-:108E0000EB1B8F7669B275BA5783F7A6807AAF15D8
-:108E10009D8FA47776A2DEF1E393C39DF585AB1910
-:108E2000E58099CFA7DCF0DB0F1F1EA69F5F6B705C
-:108E30003CA63D4F83EF1FF35AE9E9A0FA4B13DF3D
-:108E4000570A632DF9FED756ED81EFFFD50A1F5F54
-:108E500083CF9FB6E2F307BDBCFF91F02CF9389E9B
-:108E600025DFD7C3F3116D9DDE3A7D3CBF9504CF5E
-:108E70007FF4FA4785E72349E4EB512FC1618BE189
-:108E8000BE00F23BFAEFEBCE8DF5E37EA8051CFFAA
-:108E900099D88F4BE1FD8069FF9900743EE5F37529
-:108EA000A188055F42BB6389F0EBEDEEF5CA9A1F1E
-:108EB000A1AC44BB7ACB3FBB693F01F4E0DFBCDF30
-:108EC000AC9CB7F92CE4F1141B974397DF73783D02
-:108ED000C669BE46FFE956FD3FAFD1D748FABF2865
-:108EE00041FF633F6679D7C5783CA5C31FC9F71119
-:108EF000BEFA2E42F9B4F5D62C01FDBA7CB5474036
-:108F0000FBDFAFE9978D5EEECFE8EDB64A3D828498
-:108F1000F59B65212618FA3B63B8FECC70007CE314
-:108F200011BECB7DEA59F8BCD73B60EF9D963D540E
-:108F30001D502BB03DC8E94A1C5F3DD328A7F579E9
-:108F4000D8C2DDAC0FF50BB8DF710BBAF26BFA12B9
-:108F5000FAB980FAD1E47D954FA72BDEDFE9EA1B51
-:108F6000806FBA06DF0C7C9AE133E36524386F46E4
-:108F700038797F9725C299AC3FDDBFD6D789F46990
-:108F8000425C67E1A0BEBE12FB73ADB1C5986F90A5
-:108F90007F757D0D922915FBDFE2E071D42DCBEEBC
-:108FA000AEC37C83AEDBE4724449EE52AEE7946517
-:108FB000851457BD56EBD70CFF407B47F7F8496542
-:108FC00034EE721CF7C25AD683722303ED048A3F33
-:108FD000C812C617B29C9D018CCBAE173A1B17A1C5
-:108FE0001EBDC84DFA9605E65AC6A7F4A71E7FD245
-:108FF000E7CD029523D46FA5FA725A6733DA49A3F5
-:10900000AEEFECB4B4AB7EA8D95530BFF5C3E235B2
-:10901000E0A3F8968EDFA1E3F0F5AB0B370B88EFFA
-:10902000D4321812583235DC499BADB6E238EB43E6
-:10903000FBA914E885FA7BDD32EE37D8DF5A1DAE86
-:1090400007911EBF2E5C7ABDE4E3F17AB87F46F14A
-:109050000E37975BF401CAC79EF35AEE1FE8CF3B69
-:109060005A645502FD734C5632305E7887A6071954
-:109070000B052EF3FCF7D71B9C479CC73B4DF5A374
-:109080008CD33D0BB8C8BEC3307C22DDBCE6E3FE0A
-:10909000684776F8392E1F4321A46B28BF80F867F4
-:1090A0002E287BA8BC9FCAF240F965AA1FE0F5995B
-:1090B0002C8F0ACFD0EE0FD44E1AE8E74DEAD73DF9
-:1090C00030EE41FAEE1B28FF91BEE7F3FAA31D270D
-:1090D000615DF9FC7B459AFF67929A81FBA39747F4
-:1090E00017539C687EF45A7AAE6B91EB301EF77280
-:1090F0004B7F7B3B3C2F9FBF5846BB7FFE927B68DC
-:10910000FF5EEFFF52F42B90DF156906D94545B697
-:10911000F036F720BF0DC2D1AEE599F535201DB967
-:1091200054D6DF510EED6B3E6D6F37E4397552FE4C
-:109130004C8A227D9E1857D7E5E0C70EF573DFE90C
-:10914000D1B169BE8CED85F13F7317C76344D7F584
-:10915000B215BFE8F34ED6BF3EEF647246C79FFE1E
-:109160007E7D7185CCF37FE206BCA4943450BECFE3
-:10917000A58206A7C7A5F11BAF370BC679B28CE84D
-:109180004341FA9DA5F97166BDA08FFBB12352E45E
-:10919000F7E37E0363B75558E07794783BD0B23459
-:1091A000DC604779DC9D42FBF74CA638BF5EAF31EF
-:1091B000C9FC2FF0733DC29C2ACD67C3ED1971B471
-:1091C0003B3634FD5AC6E04ADA84CFAA62F814FA74
-:1091D0004F2C42F972BB87F2311A9B4E54B526F4DC
-:1091E000BFF0997F7361BCB771C26A3FC65D16322A
-:1091F000E9B3C47C07F3B88DD11B886E63AD42A37D
-:1092000095BFF56636E7EB85982223527F4712F724
-:10921000919B940A07C6279A62C6FD1CD0900EA4A3
-:109220008FC5EBCCEF13F67344EC9FD1BC63B899B8
-:10923000877A6F8D8DE86D0BE00DFDC0425097F879
-:109240007C333B4BE3C75EC2E77F373C6F66CB7C2A
-:10925000DFCDC562695983749313E964A89F3C9577
-:1092600002ED6FFA3C7A7E4437E9A97BDD7A19F486
-:1092700016E03F5CA6D939C5FCBB0DCBE8FFA4F5D1
-:10928000EEB5011FAFB9EFE98B03E3A1BFB248C050
-:109290002653F905C98FF6172FB3D8D32FEC257BAA
-:1092A000563E4B0801FFB7EF7EE1B902F2E7357B8E
-:1092B0006CF70B648FE965C67A18CCA72B75A0AC48
-:1092C000BA02501E3B508E6179AB66C7AFB96FF7DB
-:1092D0000BED649F8463FE043D59C7787CF99BD6EF
-:1092E0008F5D81AB3A319F28566C237F2FD5C48F79
-:1092F0008FFA1D54AF28277237C233EBB67E09E3CD
-:109300000D8EE0EB3E9403638A8FA96381FEC7D480
-:10931000F2341956CAC7ED2A5E45764397B62EF049
-:10932000BFD5A8F706D7A7D7B43E7C3DC295BDB43C
-:109330003E9EB25E5A2F1B9629EEC7F7E32FA9E493
-:10934000F686ECE4FB0ADBFD9C1F76F8B97FBBC315
-:10935000CFFDD38CE2BB29BE9332C346F533B4A70D
-:10936000598EEFF04B9A3CE7F8D81D8C74FB13EC48
-:1093700056781F2EAD44F9E6CBC27DD6BA62E926F7
-:10938000A4E79F68FE29ACD35DB44E45BED4085F08
-:10939000B7DFF8FD16EB563ABA757BA32542F22AE1
-:1093A000D9BA5D3E5F0C5BC5DD5ED0F0F049E39F4E
-:1093B0007E84D359EEEA77E03ECCFAE24D86BC6A71
-:1093C000D78ED93D980BADE755AF4E4BAF45B96D34
-:1093D0001EF78D2FFFC387F89DF90FA7A57CFC54BE
-:1093E000938FAFB734523B586045CA2639C078DEF8
-:1093F000CB409E9870CA49D37B03F3D0AE24D66786
-:109400006C6EF830ED572F0A880CF7C71732635E81
-:10941000198BEA79C13C0FF60D095C5340E11B3111
-:10942000210498624DD26C5DAE18F2C3E6CD9DBDAD
-:109430000FF7E1176BFBF0205F0CDF9798F2C6AED9
-:10944000686C0A3768DF8FD3DF71C2D35C85DB8D30
-:1094500073DD6ED2AFF3C2F3C30D09FB716FFE97DC
-:109460006899877E41B68E9770B8A164285E16858C
-:109470000587AC8C8C1F333EEA248EAF260D5F66C9
-:10948000FC98F1B078EE6C5A7FF3FCDF7085093FF1
-:109490006F007E305FD88C0FC6229720DDBE395F0B
-:1094A00064681F4F1767DA314F60F16C81617ED1BC
-:1094B00012164AE7F9C1EAAC6909F09AF168C6D711
-:1094C000E2A758A807FA5D7C9F87D6EF550D3F624B
-:1094D000CF5F695E619857079FD7119EBF2AD3BCA3
-:1094E0002E53CB9FF5C1F7483B485BC54A8FF0F937
-:1094F0002C82F974C843F5C90956DB8C74B2C49444
-:10950000B76086CF0CFF4C94839387EEE357646B70
-:10951000FBF8135948DBC7CFA0630D21FFB0790BCF
-:10952000837CCEE96B6174F6C078D8AFC022036546
-:1095300019F03BF379EFC679F0EF550151C13CC109
-:10954000D9F3C7ADC1F9875938A3A708EDFD7E3B14
-:10955000CA91CB1898B1D0EE429824EADB70430A46
-:1095600095F57E8F757E6A273D1E61CDDB69FF5DB7
-:10957000C9983B21B97C591570D078663B656679EE
-:109580004906CA0B333E743CCD43BCA4115E269EF3
-:109590000E5E5E445D85FE2CC6D1601DFBAF65ECA2
-:1095A000A1F2C1FD6396AF727B329BD1FEFFB5D9AC
-:1095B000999ADDD14C7187059A5E3864678D4FB8F2
-:1095C000F93E7245827CFC56B0EEDAEC043B55DF86
-:1095D0004776B33EC2DF952E778F3891E8EEA30130
-:1095E000FA20F9A5E76B46285F53CC58A6505C2CAF
-:1095F0002D7D22CB00BB98F179831F7353B61FDFFB
-:1096000017C6D10898F9FC4FD7CD5306D76DFD5535
-:10961000DB3B511EA72CF9558C3A57783E479AB63A
-:109620006E75DABA0DD8D1A5F03E01BFC73A353B09
-:10963000AC548BE3E31F281F2B56E3C3F9AFFA3A70
-:10964000A69482FF61C823EC247CEBEB094E443FD7
-:10965000F265242051CEB08DB9C83F8EDCC2F33103
-:109660001632652BE6072D8CDA8F25F613094A048E
-:1096700047647D8A163709513F8B82BC1F56CAFD4D
-:10968000BC01BA8F41FB84FC479B0B4C496C9FC9C2
-:1096900042E83F417FD9A8EFD9BA8471C60E1D3781
-:1096A000597FE676A2B67F2B3A43A150829CDEAE6C
-:1096B000D9CFC70295DDB6B1C9F1B7C8E555A584C4
-:1096C000BCD8234157A3555C4CEF4FD7DF0376221C
-:1096D000BBE6C5443BD1ED687AF1B90B12EC44D638
-:1096E000F422EEFB7F553BF1E5ECA617DB617E7FB4
-:1096F0007FFB9F287FFC5833084CC0A3373A951D49
-:10970000F5A27C90497F1536824785C9DF92321ECB
-:10971000E93D259AA74A09F9B26F662B04BFB758ED
-:10972000A5FD3268DA8DAEB8570A0988B7BBB5B85F
-:109730001910EEF8D99EC4767CDEFA784E974C70FC
-:1097400038F4F158A895F2EB6732D2237A1E88CE0E
-:10975000D77A3F47B38DF1BA51F0F3D16CFF507E09
-:1097600016C5E6776F4739F1A2487ED87702B7D0A1
-:109770007B733CE0E36C6E1F8E11231FA35CE86DCE
-:109780007CED3B3743BB153B9C2154C3CBBFF7E17A
-:109790000FAB14C4135FFFF94B16DF5785F32A9103
-:1097A00064DADF28E0711847AB40FE6B4A9123BCB6
-:1097B000039E877D75B93909701DF6355079EC0C1B
-:1097C0000ED731E8B343C1769B1AC95FF4F07DEF41
-:1097D000638A92C148AE30B22744277FBA73785C5F
-:1097E000D89DC3E379520EC7B7EBA4408B8474DDD8
-:1097F0008CFB16528CF2A05D27257AEF10044B7B70
-:109800004DEFCF75128433E22BCDDCDE41EF713E9C
-:10981000D85EF432837DE3CFE176B27F008E340EE2
-:1098200087D7DC4F3A7FAFF19F198E15D9538388C4
-:1098300097C33E353787C751B81C76BF70409838FC
-:109840001A79CCF3F52F094A2E8AEBDD2EC44B4052
-:109850003E75941E5B4372ABC8D58CE7A412EC270F
-:10986000819FBBE1E72A06EDD3FE69732A317ACDE9
-:1098700094074243EDAD772B4FCC9B8305EDFCC4A1
-:1098800095BAEC8D4119ECB977B4629332762D8696
-:10989000FA2FADE5F6D962B4CF4224B70C7697D94A
-:1098A0003E7383BE9F0374B12420C94817663BAD45
-:1098B000A3721ED9351D60D760BEF6503B8DCB9B81
-:1098C0003BA336A642BD976B45F2335E2EED7BFE81
-:1098D00042D417357685F44569FF9D73E8FB241A59
-:1098E000C7ADF977509F9F7708A5C54BE0DD2BB535
-:1098F00047DD8B13D6FBE59AA3E3D12FD89A24BF7B
-:10990000428FD3ECBD95E77FBD7BAF107722DE6E33
-:10991000136DD8EFC2720FE5AD4E13DD34CEE28D7C
-:1099200062DC493854D3A7650FDA8D4CACCD7E0D7F
-:10993000F170979DE1F9C1829BFA0C76EEC2A8D135
-:109940009E8B3483FDA39CBE1D68B6FFCC76CCF203
-:109950001CCD7EA9601568BFBCDCB2931D2D19B467
-:10996000636625D9FFD6ED98F36CF5DFD5E899F657
-:109970000F6649D6FBFB9768FE290B717F709AF83A
-:1099800011ADD7B190A420FEDCB7BC40E73ADCFFB4
-:109990002586ADC6BB33C7A1EFC791BCDD5A914642
-:1099A00079D77B6E3D2BA78FD64BB9BF16D7FF0556
-:1099B0003BC9C164FA2D252AB2629898272AD05350
-:1099C0005FCF31D11496A81FC624C953F8710E9FDA
-:1099D00087FF3666433F3B33C6542BBF54AF07FE69
-:1099E000E8748C5143FD9E4C80EF86621BC5FD756B
-:1099F000BF34C5CECFFBDA77AD8CA17F3A06E0430A
-:109A00003814800FE57051348DCA63A35E7A8E8B53
-:109A100066D2B3389A47DF4BA2E3E87946B488DED2
-:109A20009F193D9BCAA5D149F41C1F2DA7E759D109
-:109A3000F3E97936E82DAC5716ADA3E784E83FD3B8
-:109A4000FB89D139F43C273A9B9EA1E8B7E97B79A1
-:109A500074313D2BA24DF47E52F47A2A57466FA4FE
-:109A6000725574253DABA3DFA7E7B9D1367AD6444A
-:109A70005BA9DEE4E8062A9F17BD879EE74737D13A
-:109A8000B336BA85BEEBFC9CA6D9D32F05B6C994D4
-:109A90006FCF7ACA503E26E3C3439A3CAECF51F70C
-:109AA00022FDE9F5F66BE70ECCF50EE40C9F77F39B
-:109AB0009AB65E9F848EFC088FD3EAEBB63E307C6C
-:109AC0001C8195F946D8B7E2F37B2647E1F42B7564
-:109AD00092BDB1B599513E98A7B2574079D3159030
-:109AE0006658D1913BC0F3C08A722247517FB88338
-:109AF000EFEDC5FDA84B63BDBEA9482F215FEA5419
-:109B0000E86F4CBB8DDC6B85C90296950626F7B0D5
-:109B1000C1780ED85706BD260574FBAD77E62484C0
-:109B2000E7ACE20AB25FB5FDE4FDB78E65E8776C9D
-:109B300075F40812CACB558C25DAE15BD72E7A383A
-:109B4000F19C8614E0FC39661D7B1AE364459D4A4E
-:109B50003D9E271CB7597D1A533C4BE291FA54287D
-:109B60009FF948EC697C8EEF8ED7A7C1F3EC9D3D41
-:109B70004FA3F899D0D357EF86F239CFB16730FCB5
-:109B800054DEAB4CF54079D201F519DC26A9EA8BFD
-:109B90004C4D57109E785B3AC0B3F51D30B4A05CB5
-:109BA000F351A7086EC9E0FA83DDF644C2BAA414E3
-:109BB000F7AA22FC33FF26B91CE5EC56A92F25B3E2
-:109BC0006CE8FA74E1BC719EA057B66BFBE872C2F8
-:109BD0007A8402821E0FF40512E2815DEDAF523CE1
-:109BE000B02B55AEC35057FF34263FA4201D733F02
-:109BF0002175CD58D24F3ADD017E0DF6A414E074E4
-:109C0000B775C0DEB4C66F08F15BF5BF07BFFF9E36
-:109C1000A3C9AF24F87D09E7111C998FEB029C2F93
-:109C2000818F2F085425AF77B5867F339EB74AF2D0
-:109C300059842F37B3C5CA07D7AD49A3EF91F0FABE
-:109C4000EDFF65745B13181EAFACD2CBE3CC5A7E2C
-:109C50005A3279B33FC93991E6C01039C7E3A5320A
-:109C6000C8B971C9E55C6D6004F99524DFE1F6803F
-:109C70009EEF10FE7E601471FD3B6D721DE6BBC44D
-:109C80002632F213C0BE6CC7FC9D3131A582B6B13D
-:109C90005028231E2BCE263FBD08EC0DA98261AAB9
-:109CA000630F3E2FA9CCB42D2AC3BC068DDFE4A6DA
-:109CB0004022BFE9FA7E901F75BAC8EAA273164027
-:109CC000AF984FB84BC3D3603F3C1EB1F696DCAEA5
-:109CD0008E0439D815CAA3B25E3F19FDBEA57D0713
-:109CE0007941FBFD97D45AE79BFC6B40D4EC9C7EFA
-:109CF00015E93C3685C974DEB9FD08C9A74C904FFB
-:109D000042110F0FE1F8F9D1D487314EFBEB40B689
-:109D100026CFE5D4CB3DFFFFE8B9037C75E2A75A17
-:109D2000790F9EAB18037A484139590BB057A29E60
-:109D300073D0BA2B8CAFA352CBE23D02E1AD07FD4D
-:109D4000E6988D9FCFD8EFE85649EF383265CC3F83
-:109D5000D9E58FEC0DF893F3859CA694E3A2FE6100
-:109D6000F37533DD41CCCB9153B1FC2A94EFACC1F8
-:109D70003CA13EA695EF744FFEEAF1873F04AEDDAD
-:109D80008FFB54D501F535A467A0EB3F205CEA9921
-:109D9000B244F1E151EE3FE9FC39C84F72B9CE4F00
-:109DA0004D65240FDFC5FEF5FE92D937FFA2C9CF5E
-:109DB000FEC0F0F68D4EF7A76DDF68F0BE3302FFF0
-:109DC000CF7CFEB5CDDBD860FCCF93FB46AFA4A023
-:109DD000BD3D951D9D8471AF5E4EF78CC7F9548CC7
-:109DE000FF011DA454BA4C715B6186167719365E6B
-:109DF000ABC793F5789F1ED74BD7E80A2F0C403D91
-:109E00009E5E234B8BA8BF3E7619F4E709723CE9AE
-:109E10007C8D720BF7E75D6BB2A4B16583FD82A404
-:109E20002439D5D5C8E48E4CBEFF9A01F2A573350E
-:109E3000233F2FF6B248FD1F576D1F3AA1DEF14AAE
-:109E40004020CA05952972B6760E81885C267A75FF
-:109E500032D68DFE36FB41C8E5C038F7E702530124
-:109E6000EEFD9F8BF49430C20D8D2E099587B07155
-:109E70005D466D08F703C5A35006381B326A33B040
-:109E8000BC7FFFA410B388DF5D116932C497CC7822
-:109E90001AA8F79D3594AFB06584FDCF9AA043B75B
-:109EA0003B2B8268EF5CD5DFEE5006F73FF57DBDBA
-:109EB00060F19317E13D3BC165DCFECC65F1D64412
-:109EC000BB29617FB116FBD932B8BFD87B46E2FE11
-:109ED000E28ADCDBF0E8FEBF0CEC2F46CEC1FAAA2A
-:109EE000B7BB1CE953CF87DDEFE0FB006CD28B3EA4
-:109EF000C5823E16943FEB277AD4FC8921DFB5B8A2
-:109F000099D90F9E1534C6F18F87E664F4E0C72413
-:109F1000717C3D9EA7FBC118AF932DF9CE887F7D44
-:109F2000FC0502F763995D2079A7EB4D902791A07E
-:109F30009F9A513C5A750A94AF753CB45821BF287A
-:109F4000897C19D837603D2556FBAC0BB4BC13F3A4
-:109F5000FB5B825C3F2FB0F338A5B0724904C75D4C
-:109F6000107409CE043BE9EA20D75FFAFE8B23F791
-:109F70006415E2D9E1882856F336EFA35C1D64032B
-:109F8000E7DD42167A2F199E0ED83B695FEEC012AC
-:109F900091CEEB1E8F9C4BF73E24930B6F21FD94CB
-:109FA0003016CEE5E30DAEA335DEF43C19F37ED5D5
-:109FB000C0F7A6143A7F63CE97794CC3DB3E0D2FD2
-:109FC000FFDDF932FB34FCBDA4C567F478D6254922
-:109FD000E4FD79B6FA47888E4688CB9CA1E7FB68FA
-:109FE000F861CF8CA77B3936F4DAE32902C263A388
-:109FF000FDCBC63F8821B4BFF4766E93BCD0F37717
-:10A00000F472DA4981C513F611D2A46E8A93A69D23
-:10A0100094E8BD99FFEE30F19FBE2EC9D6595F1767
-:10A02000F3FB2E6D5D0E34FD5B00CFBB6C4861967B
-:10A03000F9445F048DF177731E40B27DEE835ABB05
-:10A04000E391C93928971B1DB192D1F0BD8E9F377E
-:10A05000BEFC8D0BF96CC349E70CABF57835C8FD38
-:10A0600016D0A7EB12F7413DF35F6BC75ED324E335
-:10A070003EA8AE4FF57DD0B44AF33E9AF53EE806D1
-:10A08000662D1F93ED830ED9FFD4F4ED896092FD08
-:10A09000CFB2E1CFB3EFD6E879A4BC8F2B1CFCBCC8
-:10A0A000ACF9FD8B03EBB0BEE047C05737363969DA
-:10A0B000F7A9A7C9497CB8B82985E2B28BCB79BC8E
-:10A0C00077F17D82B65F678CC3BE04F262199EAFE2
-:10A0D000D7F4CE5116AE467B7456A560D8270FD75D
-:10A0E000A618CAF397DCF312DE9BF0728D5DA1F81F
-:10A0F00033F41543BBA096E72932A5FF4E8C73EBD2
-:10A10000F1677DFD5FAE3D4AF7A0C5C0CE2F096166
-:10A11000FC5924FE7AF9F549FC5E3A61703F5C0116
-:10A120003B61C379E328DFE360D9B728CEBB01E305
-:10A13000E230D30D5FFE6606D11128E518F2EBC4BC
-:10A14000AC38CAC7C5132AB2912E9F99F8B907E354
-:10A15000A2EFDE76DC8FEBD4D7D24C7907E67537E9
-:10A16000C799CDF1E5D38D279F9B3B902740F4F015
-:10A1700092299EACCB2BB3FC4888275F983B8A780A
-:10A18000B22EB77439A1CBAF83651D6F3F04FF3C7E
-:10A190001871124C6F69F31EE04B8D2E0FEA7CF89C
-:10A1A000A593EC916726FE96F2ADF47A2DC14CE2B0
-:10A1B000C36F95C5EDB43F8B790AA583EB323F722F
-:10A1C000ED4019BBFDF6D29506FA18905323CAB19B
-:10A1D000E1E59498CBE313C9F235753E18AA7F4A9E
-:10A1E000C84E4DFBBD3DEE2AFAEA7AA8B1E9D70A7E
-:10A1F000B683E7666A3FD111895BE827333C69275C
-:10A2000045169F94F85EE1EF07F48083BEC7EA9598
-:10A21000D5AB7DDC9E6E23FE8C3969FFDCA7B6E4EE
-:10A22000427D9F5F8D213D3CEC535B7313E4699B42
-:10A230009DEF478A361679C2022F4FE56A7A9985D3
-:10A2400003D8DF9A3AE3792EFDB93D97EFEFEDF1B0
-:10A250005707D0BE6E3B5C1E40FED9EBA9267B3B68
-:10A26000D9BADDA5F313CAAF92417F62A3B6DEC0AF
-:10A27000A22AEEE3AEB1870389F1C675B93C8F23FC
-:10A280007DF293BD6837B7C936CA136C9379FE75F2
-:10A29000BB5B9AB14D6BE733B493F47354745F8630
-:10A2A000E436E6573FA5D93BC9E6F954AE4DBB5F4E
-:10A2B000B4E7DE5A6150AFD88FD4B9E8FE07A6CA1A
-:10A2C0003CBF2964C8A7B66BFAA5DE94AF21CA5F6C
-:10A2D000CD6F0BFA23BB722DFCB63D3EF5295CEF2A
-:10A2E000A81473227D445DD67CFF8CB6AE3FD0E6C9
-:10A2F0006BBE575534DDFB209AEE7D88D537FFAC19
-:10A300000FE96DB5536EF3D13D0F74EF4314AF5C9D
-:10A3100082E7DF53783E0BF87FE7F2F306A13E9425
-:10A32000AF2CE0A2785467BEAAE64359F4D81E5A6F
-:10A330000DFDB5A9F52A1E5DE974DBBA709F2F33B8
-:10A34000183988F398EA9148EF745E9C4A7A08BEFF
-:10A35000A77039C264A19AFC41BA34057D703C5F94
-:10A36000660F38289ED516617DCE71FCFC3FF653F2
-:10A37000C77AF6D716A1BDEDAA443CED0F4DCA88A9
-:10A3800058C809FD69DEFF7FFBBB6F1652BEAA18D5
-:10A39000F908FBEB6D5CBC11F7F557EC1443B88F73
-:10A3A000F09DEF1D3C839F3732EE33DF9F36A50FC4
-:10A3B000F559D4EDA07A7B3CD59D88A736C1D389C9
-:10A3C000FE6EDBE1953F413CB6B5F238B719CF7B65
-:10A3D0003DDFA3FB358EC372627DF3FD1AAC73259E
-:10A3E0005F27A78BF62D61BE2CAF8AAF23C5070F61
-:10A3F00079E81EA8E3FB9F71237C5F63DE697955D2
-:10A40000C3CD3B5F26FB45A31F2685D7E1BC6E1657
-:10A410003D9D1D3EBC270DD61BE1DE65277FFFFE5F
-:10A42000B4745AD728C087EB2A7A1A5474C9FEBA72
-:10A4300053A4758E4ACD342F1693D8767CBFEBC4C7
-:10A440000FCF473A50B368574B2C6826BCFC15F029
-:10A45000B2DA022F403F4579B85FB4EB46EAA7D3A2
-:10A46000E192D1B269F354D379E5D1DE2F5296C788
-:10A47000F924E17E91B2BC2A8BFA9A9F85FE368E32
-:10A480005B27B3CFE26C10EFC9F257CED7FA1FE8C3
-:10A4900067E4FC95F313C7D7C7FD1AEB3AFD74D6F2
-:10A4A000B5CDF57FA7A39DA58AE9A1944228E33AFB
-:10A4B00021FE719D70BDB4B80DA92005E940EEC91B
-:10A4C000433AB8313D84F43992DC90185F77BB048D
-:10A4D000F40C769D538E1CA0B38B5ABC479727660D
-:10A4E0003E6B7319E5559B7E2FDFA1D1C92BA09739
-:10A4F000AB71DDCC726BB474B2324F30DF43B33228
-:10A50000CF9F9C4EECC1F08D8877C4535E05C52B60
-:10A51000BE8BF5F7EF177738C6E2783C6ED61F642E
-:10A52000F2430979593A3CEDB8D9CDE3D414FF9000
-:10A530001A19C33C386F694890CB464547ED89F0FE
-:10A540007D037474D77074E466BD745E63B99E9FB6
-:10A55000B363F8FC9CAFAB7F603DBB109E36CFF77A
-:10A56000883ED7DA5D32BF47EDF4D6F5D1A1EBFADC
-:10A57000E8F0EB1A791CBFAB79D5748F11AB692267
-:10A58000BB69975F7D13F3C5981432C8C521FCA33E
-:10A59000C9ED9BCF54285F7577AB26E75A9D32DA19
-:10A5A000E3CFFA6E7C1CEBDFCD9430C643A7D856C0
-:10A5B000119EFE0AF37B284472B514F77DA22C3558
-:10A5C000A4E9D1A7110F339456210BDEFB162836D0
-:10A5D000BA8654D9C46C65A3C7C34B43E5E04B238B
-:10A5E000C8C15E8D9E6F427AD6CFDB279383874E9C
-:10A5F0005F0E1EFA86E5E09FF34E43AF7F03F2E65F
-:10A600003384DF2C6FDC1A3F5F1962218C978F3601
-:10A610009F0DEC4D05F9AB2EDD45F4D3F68440F9E2
-:10A6200052608747A8EC7191B0D9EB71F0FCDF1D47
-:10A63000FCBB58CFF16CC6D39779593CEFA67B652C
-:10A640005832E449C5881FEE528FC9C522E6F7D7B4
-:10A65000123D7B357B46CFEB4FD7E4FF809E9F6951
-:10A66000A3F1BC055CBE7BC1DE41BB88497D0CFD0E
-:10A67000F89BF378FE3EF003D1378C12467EC8A8D3
-:10A68000914C795A9C5FFC12B777327D4C205D83E8
-:10A690007962F0FE04D813783F41A66A6C7773EABA
-:10A6A0009502EAADBE2677B340E7F4C37B7E0CE5A6
-:10A6B0002CCCF702BEF1CE30D6F7B384B2857F1E24
-:10A6C000AB67A598B75896AFF9E90E1620FDA8F923
-:10A6D000E9FA7D81E2C8795F95F9A3882F9E97AF4B
-:10A6E000E79918F571770AB38CAFFD473E975B0D7C
-:10A6F0007D75F56857AFF230B2AB56A1EEC472A6C5
-:10A7000083EEB509EDA97459DD5791A9DA0CF7F379
-:10A710007A67A41AEEBDF587B30CE59CC65C43FDD1
-:10A720006064ACE17BDED2B30CDF0B9A2B0CE5311D
-:10A73000D1F30CF58B00C189E571EB2E36D42FE9EE
-:10A74000BCCC503E73F3B70CF5C7C71719BE9FFDBD
-:10A75000C87586EF13BA5719CAE7ECBCD550BF8D40
-:10A7600059DFDFB9219FCB29E0779263ADEEFA463E
-:10A77000FA1D0DD96188F32FD1EAEDC9AC2EC57849
-:10A7800048DB91F252F287D3CF1BD61F36CBC5647C
-:10A79000F2D8FCBE5D1BEF93A7DFAF5E86748E42DE
-:10A7A0001EE4D227EEB7D6E29CD697F1BC04FD7723
-:10A7B00031CCF7F20FEC534A2ACD67419683599D6D
-:10A7C0000F5892AF58EE2FB40B2117EE1525C39BEF
-:10A7D0004E8F23E1ED4EADDED7C5DB21C118074218
-:10A7E0007DF284055C7BF307EE3B78389FEBABCAC8
-:10A7F00054F230F83D0EA7AB4F7438409F3C915F48
-:10A8000035343FFC93C6D7AEBE5FC1FA57F3FAB6F4
-:10A810005029AE4BB27DA5BDF9E67DA5AAA528E7D6
-:10A8200016785285C4FB9A7FA5D5D3E3D96DE99FED
-:10A83000D3BE529B23543A9A7DA55FE19D1B558858
-:10A840007F858FA7AFAB5D0DC896FE9DD98E61CF7A
-:10A85000E33D1831B74479C366FF2EAAC96DDD9F69
-:10A8600093F6D691BFDFE61E4B791F6DEA2AD29789
-:10A870009D49FC5CD0977F447C4EF5DC64F0E70694
-:10A88000E3012A8D076DC96E6A4BF0FF715DD5FB40
-:10A89000F9BDDADF801FFC51FE69D8090AE37EF0BA
-:10A8A00071C6F1745CB5919D701CEC0494BF6B246F
-:10A8B00046FBDEB14A41B1F28B3B576BF6E16A8E43
-:10A8C00037F37EB7D9CEB824B492F0B606E8C955AE
-:10A8D00089F1386EFFAEB1F3FB37656F3880FAB699
-:10A8E000DFEF600F01B47BFD3C3EA7E3E5ABCAA3FD
-:10A8F000CC8221767266C13076F234B1AC1BEF6D3A
-:10A900003D7692C745143C8AE8C37BC8F9FAAD7A14
-:10A910007E4E6C05EAA922A919F3D745A664205EEC
-:10A92000563C27B2B88072CC989F6F67CD3FC278F3
-:10A930001CF3F1F731E66A453B29A3C6A8C7325597
-:10A94000A31EF3CEC832E935A31ECB6934EAB16049
-:10A95000C4A8C7F2965698F49A518F8D89D69BF465
-:10A960009A518F8D5B779949AF19F5D8999B8D7A5C
-:10A970006C7CDCA8C7CE7E649549AF19F5D8393B0D
-:10A98000571BBE97F77418BE4F7AEE6E43B9AAF7FD
-:10A990000143FD730F3C64F83EB9EFFF18BE03A2FC
-:10A9A0005FC5F30C780F2D2EE2F91F3C69FCCE54E5
-:10A9B00007E6E35F8FE733611D2FE8FFADA13FD6C8
-:10A9C000C9CF2DC4E03F5CAF3FB308DD0300726C1C
-:10A9D0005F1EB4BB212E847A18EAA727DEC77D9BB1
-:10A9E0006B0322F9712B30D88AF4F0A8278EF4700B
-:10A9F000CD66E3F9876BE3C6720CE847C1B802D0B5
-:10AA00000FD2D7F5A6DF8D007B90E8ED7A456A4638
-:10AA1000BBD24C5F7FD6E92BA6BE8AE739F4F9EAB0
-:10AA2000F3B3EBE74F35FA5335FA63E22E82FBFAC4
-:10AA30003C917E7F479FAF0AFFF1EF1F39701E27C1
-:10AA4000760ACC8BFBFB2CB62FCF623E37ECDCE4D6
-:10AA500040FE34CFCB3C8F21766A81715F719AE8DA
-:10AA60000E11DFBD2E923EA229209F3DC6CFEBAD39
-:10AA70007A5EA47331C887E82F88B146C2CB0AC07A
-:10AA80000BDE1BAEDBADC7B476C71E14E97CF34802
-:10AA9000FCA868F870068CFC98A2A49AE8C988DF24
-:10AAA000B452237F5EFFCE450E945FFB00DF420D64
-:10AAB000639E90915FAF1797D13E9F8E6705FEC34F
-:10AAC0007125307571DE37C0BC7B94A1F85DBA6B1F
-:10AAD000D3DA3C0BBA1909BF8F1618F7E9F4FDB9A0
-:10AAE0003AC08EC322AF54C7DF2EBFFA24CAC76450
-:10AAF000FEF0EE02E3BEFA28FCE1DD89F2F61BF07F
-:10AB0000879F2F1856CFF5CF427FCAC9D2431D1653
-:10AB1000713F89C93D18AFB537F3B8DF60FCEE1B54
-:10AB20008FF3BC5B5045F7CE919E4B91F4384FE8C4
-:10AB30004004ED938CB342981735DA38C75F0A8624
-:10AB4000C439FE52307C9CE34D3C4FA866E436D8B5
-:10AB50009099A45029DDEF8C20F03CA44F118F4335
-:10AB6000F2758BB3B4FC6365D8FCE34BB4FDDDEA4E
-:10AB7000807A12E180FE3EC7E7C07D6C957EEA27B1
-:10AB80007D847E62F5DC5E8BD93C9D6DDC5EA37DB1
-:10AB9000A66F208E915E887EA99BE3BFCDC1E3B6F0
-:10ABA000A71B670B160EC17BB07018BCFFFDED1C18
-:10ABB0007E6E3504D6417972FAD6CF61EAE5F59911
-:10ABC000467F796D0587AB441BFFDBD9DC1F985CA2
-:10ABD000C8F94FCFBBC4BCC5940A28CFE4E794F4AE
-:10ABE00073AD7A3F930B3D54FFB340FDE4423FE623
-:10ABF000CDF2FB77D6661AEFE1F9B8A06E32CE6BD4
-:10AC000092D6FFE442C6F399C772B8CC79A77FD336
-:10AC1000EAFFADA09E9E788E16FD1287285AE27339
-:10AC20004A218F13E8F7DE4CD7CFCFDDC7CFD799B6
-:10AC3000EF5D003E79037F1FEAE89D76F2F7401F43
-:10AC4000D1F9B92579FC1CA2F93E8548A9BC0FC5EC
-:10AC5000EB095666792FCF903C8743B750FEDDCB8A
-:10AC600093992C0447CE7BB8BCD0783FC257384765
-:10AC70007765E128F21E166AE7E8FA52B91EEB0F73
-:10AC8000BAE20F59F8BB516D9DEED4FC5ADC9FC659
-:10AC90007D72BCDFDB6ABF3C5AC8E967B4E7AAEF44
-:10ACA000764422C8B7E673D5C9CE53F739FAD6E44D
-:10ACB00020BCE35908EDF79C05F29E1CA897DAA08A
-:10ACC000D0F9C7B5452CBD06BF97DB4278AE2373DC
-:10ACD000AEBCD68E7C5ACCB20428F7C5E6D0F87745
-:10ACE00036325904B8BA0AF93EFAC2DB3EA5F1FC85
-:10ACF000B5303585CE9D4F47FF2CD6C8E8DE42F3F0
-:10AD00003CEFD6F8C5B586DF9393516C9D877FB72E
-:10AD1000468F20B736215FD415B31DFCFC2C3FA70E
-:10AD200080D7D253FE662895F6052F8575E3FBE79D
-:10AD3000BDB47E3705A6DE8FEBA9F39B43CB533022
-:10AD40009F27EF2A3CBDF3E4A90BACE1FD9DB6DEE5
-:10AD50004DFEF0CF10DED4D24EFEFBA55F9E3A250D
-:10AD6000566B3FEDA860FB4804F55F0AE83F019F82
-:10AD70008A4CE768994BA0F3B02EA599E82AA5263E
-:10AD8000E4C5DF456357D918DEE332556BAF363281
-:10AD9000017F4F827201494E9B7E5F420DB5B742E3
-:10ADA000FB69B86F16C2BCEFD052ECAFC19D2A63ED
-:10ADB0007C33A5B8B90ED7EBD985BC8FBB939C97D4
-:10ADC000D0CFD90FDE3FB5EC95BDB509F70AACBDC4
-:10ADD000FA15E3FD5357BFF275EE9F3AB8F5EA57FF
-:10ADE000FE27EE15D0E51BA8213BDAF507447E8F40
-:10ADF000DE5F9FBAC28EEBB0B68E7523DE639F0313
-:10AE00009E5D8378B6D7879FDD8276C9AAF410FF4E
-:10AE10003D91D87710CE77D2988CEDF57C43819513
-:10AE200092BE9EDB2890FDC0A4FE1BB03C7F579ACB
-:10AE30008CFEC35F9F7AB32006F4F9F6EDC73D9808
-:10AE40009FFAAED4EF41B83EB8ED350FE2EFEDDB3F
-:10AE500044CA43A173DF0979625F6AF4B5604CF8B4
-:10AE600038D2D7C296FFAA4EB4CF58D44FFAFEDAE2
-:10AE700038409C68F73E9266F85DD1E5DD5E435947
-:10AE8000D7F3CB9DD6E7E62BC770B974EDA35D8EE3
-:10AE90003C05C78FD8C7C03C3FD0CE017DB0C3436F
-:10AEA00076BC0ECFA247CB1D680FBFBBCBC97A289B
-:10AEB0002ED86B676EAE3F30EF22C2871E02E7BE10
-:10AEC000DD790EE4B32502EB771273B37D88EF3F93
-:10AED00069FE9F791E4BDE961DB8BE4BEA583F9E19
-:10AEE0003B5B7493B0F666A8BF28E226BFDF3C4FF9
-:10AEF000B3BEB906EFB311ACEE816BDEF73BE8E70A
-:10AF00002AE807EDCF259DC6EFC79EBB71DF161857
-:10AF100077C74E07D98BD78C10EF1F3F46D34BD541
-:10AF2000ECDC53E348FF654C5092DB1DBA3EFAA0BF
-:10AF3000855192CA5FF0F77DE1F9518B4CCFE385E3
-:10AF40000AADC7F53BF7ECA3DF16967AAB51DECD21
-:10AF50007C7E71DAB7D8605E517557DB335B88153C
-:10AF6000F47CD51E8AEFD568F7BF5CA39DFFA83A95
-:10AF700060CE57DDF3ECEFD06E83F99FCEBD3D0B75
-:10AF800046796FCFB1E7A6A6D1F9001D2FE7025E83
-:10AF9000C4AF8F9764ED9627F9DD169D9F8E6B7A6F
-:10AFA000F7AA6DB3D7E6C2F86D4FFDB910E3C7310C
-:10AFB000C6E9BBEA41FEFB3F55EE6CA23717D267EC
-:10AFC00010F16ABAE721C6DE6009F47DCDAE34A285
-:10AFD0009300D843CE1A7CC3E9B50AEFED44FA7E5C
-:10AFE0009DB77769FE6D64D7EDBCFEEF1CB23340B0
-:10AFF0007C19B0D1B32760ABB1B867CB7CBF58A781
-:10B00000B1FC89BDAF10E5CA35263FF413C13A3F04
-:10B01000EDCA3163497E5DA5A8D3310F60090BAF3E
-:10B02000E5F15B7E6FCF0752E7BEEF23BF6F13588A
-:10B030000CF0B4FC378FFD2BCAB1EB1EBF2F1DE502
-:10B04000D8875267368EB76CFB9A74BC5FE60329CB
-:10B05000968EED3F8C737936445F8E11B47D293521
-:10B060005D00997C03911AFCFFAAFEB5B7C2387F38
-:10B07000033C23DFDFB0E31F54DEA7BAFA5900FB1D
-:10B08000ED9B8E705CDBE46E6E0DA17F69E4CFEB0F
-:10B090007E765FB642791EB13C0D7F79D8EE866D23
-:10B0A00076CAF3453F1E8759C1FA697EE6F62BBA88
-:10B0B0008F3A505ECB36D69F7FFED0EF602139901D
-:10B0C000DF56ECD8F0A9988ECF0FDFC2DF835A612C
-:10B0D000B24F976AF2DB4CFFBF30D13DE087E20B05
-:10B0E00031808BFF1C1397E36D3FBF7FE26180EFE0
-:10B0F000A36D2FA6E3EF4DE8F4AFDFF37CAC7BF15B
-:10B1000042C730F7087DA2F1C9807ED0F493B21314
-:10B1100000CB81E22EFE5C66EF493F1FE6BBACCB65
-:10B120001E429A5FF698A8BAD1AE3AE8247B64D959
-:10B1300063C7896E97096ABF407A8EA5A31CD7D7CB
-:10B14000EBFAC7FE341DE5F4F54191CD0456BCEE93
-:10B150005727787DA0F314A87FFD1387A77F1FCB07
-:10B16000204F5C16EB35B57B8FA3CF6DB15EDD87CD
-:10B17000A7637CBEEDE77FA7F5F870B7C0728A863B
-:10B18000B65FDAF5278A837D040BE3CDE4F8427DD0
-:10B19000B3A25B6C726458AD5FCFACDF56D277CA96
-:10B1A0000B1F691D378C615C3FFEE6B15FFE16E048
-:10B1B00058FA96333413C7FDE58DE90CE8E0CF5219
-:10B1C00033A7FB1FAFC946FDBDD41ECB96E9C9DF2F
-:10B1D0002FDDFA5DA2C76B7EFFDD6C6DBF2168239A
-:10B1E00079100BE23C973C388FE679358B103D2E79
-:10B1F000FD31BF67F104F8D9567E42A5C2E59693AA
-:10B20000AD9C78AB0FE526DED902703818BFAFEBE6
-:10B21000559EFFEE64976524DAB90E85DB7331160F
-:10B220007F07EDCE15A09651AE89BF3F311DFBB90A
-:10B23000A9486A76527CD4FAFE9AFF075C96D1033D
-:10B2400000800000000000001F8B080000000000CC
-:10B25000000BE57D0B741445D670F5F4BC425E43DB
-:10B260001E100884CE3B488803492001D481400C3D
-:10B27000CA63025151220C014380BC445670F5DB75
-:10B28000740820B0AC06659515740704C5E706047C
-:10B290008135C2441483EEC128AC8B2F761004791B
-:10B2A000C980B08EFFB2F2DF7BAB3BE99E2402BBCC
-:10B2B0007EE7EC7FFEEC598BDB555D5D75DF75AB92
-:10B2C000EA4E1583BF04C6F23E1ED5DD9BCE98859F
-:10B2D0005D30DF9BC5D845C6A467EC8C5531A3EC27
-:10B2E000B532FABB12CFD889F5962EC28D5076634F
-:10B2F000650DD0FE0AFEDDD2564E9704C6B2A9F9FE
-:10B30000276C106395F82F09FAD974227F0DF4CBBE
-:10B310006244161EC3E167A218B395845487E7C040
-:10B32000F70E1E35F7847A39CAC0926D50DFF20DE0
-:10B33000C1CC1E2D617BB5FFAA1D16E651C703FFC8
-:10B34000AFDAF08D99613F06E6EB35B47D3D63D50C
-:10B3500019BF8EC279844BCBA13C61F6E5BF85DF76
-:10B3600081EF6E84EF94AE82F6699AFEB69EFC9CE5
-:10B3700065607B73DBF378FCEF423E2FB138DC1560
-:10B38000C2D84C9826CB6D3FFF055FD63EFAAEA6DD
-:10B39000BF0C2934EA7830FC63301B7C456C7B9F02
-:10B3A000AD8D66AC47FBF77FA8911F7DD7846FCB2F
-:10B3B0008C41937293FB05C453F96716BB0C782C30
-:10B3C0007FED92D9003013982FB92B63A75FDDF37F
-:10B3D000E93D309FD30DA6A831F4554798D0AD0D67
-:10B3E000EF655BBEC95F03ED4D80F720A067E5D632
-:10B3F0001FCC06681F93C77C1618FFE9282763FD3A
-:10B40000116FA6AFBD1ABCE5C1736F088D23D610AE
-:10B4100083A52796415919C5EC1E78BFF2A06897FD
-:10B42000105FCCB7C416D2FEFDAA86A30174D1D793
-:10B4300033E6333BF1BB5B7F7B5E0CD3E2DDF8B5DB
-:10B4400057837715CF8178BD3B00AF97587A387C0A
-:10B45000869D7A794E1F577A7BFCAA78FDAE8621AD
-:10B4600093B73EBFD047223C4B3BE043DDA1AE51FA
-:10B470002919FB9469F038FB95B3C4BFFFE821326A
-:10B4800011F8A672C38F4B90AF00AD3E0BF06FA5C5
-:10B49000FB3CC18B1D561F23B8A948C8E868DE7A5B
-:10B4A0007C06D6F742A466B7D1DFB490C9A1D0AF6D
-:10B4B000EF6DD1BD1E86764EF28545C0FC1607B1F4
-:10B4C000A94E28CFD914B8AB0AB3A9D3609CE7E43E
-:10B4D0000C9B8CEF05B1490D409F734E5F58D79080
-:10B4E000B6791F6914C32468EF75B3828690F67C21
-:10B4F000C8581D7DDFCB3AABAFA5718E122FBFEEC2
-:10B5000085EF5D908DCC02DFF3D6FEF0BA17CA63EB
-:10B5100046AB0DF134A3F6AE306680EF37268E9F32
-:10B5200004EDEEDB07F8A3E939CC3D00BFD3F9D435
-:10B53000D9B74C7E6A18CC4F0CCDDAFB16BC5F0A2B
-:10B540008815815F67ACD0E3673673867BE2516E06
-:10B550004D6D7C42FF759B3DF0DE4C5748F572F80F
-:10B560006ED95A7DFDECC6D3C45FB303F8CB85FC1E
-:10B57000D5A33D7F6D54F96B001B80FC354A0C311F
-:10B58000203F9F6B16DD1678E7C222135B02F08521
-:10B59000570537837E2E34422384777098C9D1C4EF
-:10B5A000B72A9FAB783B83FC97DA1E9FADF5DBBED5
-:10B5B0001AF43034297FF38B8C35509E79F3B39491
-:10B5C000B710DEFEB7B82F58FBF679BB7E9C42E37E
-:10B5D000DA656138AE73BBDE8F7B18E13F5BECC888
-:10B5E000B7E7165A1C0CF5DDAE507732D6F7067E5B
-:10B5F00000BAD7BDFD4306EA7BC616111D5B243396
-:10B6000095171AFF7958C079345A249C47D52E4093
-:10B6100002BC5FF5E72037C3F7DFFE61902BE497AC
-:10B620009B4FA599B9883F43D9A42DC8BF5D990305
-:10B63000E753F556EEF3B5F0FD8AAD4DE6E9509FC0
-:10B64000B7FB5F19A88FCE6D6932A3BEFACEE47D39
-:10B650008E017F7C214DAE37019EBF0B85CE7A32A5
-:10B66000362F7E8D530EE9082F1C0FE7000F382F61
-:10B67000C04B993BBD737C5CF8AFC5C7F929F8FD99
-:10B68000F2C6C14C8CD7E24570F0E7A16EAB40F337
-:10B69000E7CF77FD90C142AE3E5F5BBC99E4FDFF12
-:10B6A00097F966C4FFB7D297F3FB9B12B74B817C27
-:10B6B000DF9EAFB73F48F0EBA1761AEF35CAFBB873
-:10B6C000FFDAF9FFEFD0BBFCBF76BE57A3F73E858C
-:10B6D000DEA1360BEAADB7FF15C7AE63DEBFFD7F57
-:10B6E00074DEADFE8FC16ECD82F17DCEDC770C179E
-:10B6F000C82BE9D01FD9112F507BA6AC3BC6297EA1
-:10B70000451DFB7AE434F8AE0CFE04FAFB75215FAC
-:10B710001B0F02DC027E02FA170C9D13C0434BD1B3
-:10B7200000F772B4DBC66A6603D8F4E97482279521
-:10B73000FC68CC82F677809F87EDF7D77A67D44292
-:10B74000FDFEAE06A90EE0F18E89C95B01B6F514C7
-:10B750006DB88EA973645A25CDF8C6E7E8D723F7EC
-:10B7600004AC2BEE9AA4AFBF93AD8F36427F779691
-:10B7700099981BA6744740FBA7E26D34CFBB58F5E0
-:10B78000625BC8F5E3E9783C5F9FD5B181CD12E2F9
-:10B79000C521DA37B2F678638837C44B4C265B6E26
-:10B7A000C7AF788D0701B628FE15FC913CDE116508
-:10B7B0007D01F1646173D983D0DF25C9588DED2DEA
-:10B7C0000CD68D7CDCC215A13DDEE04F320E225737
-:10B7D0009C4830DEF100433CE3F33E31BAF769DECA
-:10B7E0008178BE7EBC2E4C7E0AF15A146A77235FA4
-:10B7F000389E8F36C2F7EA00CF82D0864F154F8130
-:10B80000787F0B7943E397AB653AF34D41BF338CB7
-:10B8100085D99743FF61D65ECCC8E7E1B3F4C0C2D7
-:10B82000C670BD268E600DCB61BDC6728C675AE7AF
-:10B830009540F59E87E1BDBAFBE17DC46B2F2639AB
-:10B8400089FF8B6DC7FBE132CFC5AE04B7F99F1FEF
-:10B85000E580FF194F25F1ED471BB8BF7969D81B6B
-:10B860004B0680283198B33C08FD5CE54FF616E3A3
-:10B870007B2233D871FDCB1C0EC93608FB65B4AEF4
-:10B8800009CF31E8D6BF5D1D5D74788B2C88D0C19F
-:10B89000D1CE9EBAF6DD2725E8EA7BB86ED0D5C7B3
-:10B8A000960DD4C1BDAB87E8DAF759304207C7CB54
-:10B8B000B7E9DA272E9DA08393EBEFD1B54F5D5DFD
-:10B8C000A2ABEFEB9EADABEFB769AE0EEEDFF06B68
-:10B8D0005DFB1B772CD4D50FF02CD7D567363FA155
-:10B8E00083B35B9ED1B51F7C68BDAE3ED7FBB2AEC5
-:10B8F0007EE8B75B74F04DBE3FEBDADFE27F4707CF
-:10B900000F671FEADAE7590FE8E051B62F74ED6FC1
-:10B910008D391A10EFB0C90F64A11A037E02391BCA
-:10B920002D9DD6B587155A31F28D49E187DBD3BEFF
-:10B93000D7D58FB5FF53D79F9955031190ADEAA97D
-:10B94000ECC21AA80C612D543ED4DF757B02CAC329
-:10B9500073F21264AAFDB93FC4A11DF968D803327D
-:10B96000F2DDA518661307C07898CF887C6D08BEF5
-:10B97000DCCBA5891B85F945E6C9043EF40B54DAF6
-:10B98000FCC1CC13097CE80FA232C21F49CF23FDB2
-:10B990005DA98CF2C7D2F3687F0F2ABBF913A9EC1B
-:10B9A000EE8FA732C6DF8FCA1EFEBE54F6F467D2F2
-:10B9B0007BB1FE0154F6F20FA5E7BDFDB954C6F9FF
-:10B9C000F3E8791FFF702A25FFED54C6FB47539912
-:10B9D000E09F48ED12FD855426F927D3F364FFDD7F
-:10B9E00054A6F8A75399EA9F46659A7F0E957DFD68
-:10B9F000B3A8BCC1FF00BDD7CF7F3F95E9FE87E963
-:10BA0000797FFF435466F8EBA8BCD15F4BA5DDFFFF
-:10BA10005B6A37C0BF8CCA81FE27E979A67F25956E
-:10BA200059FE35F43CDBFF072A07F99FA772B07F68
-:10BA30001D9539FE57A8CCF5BF44E510FF1BF4DE79
-:10BA400050FF662A87F9DFA2E737F9775279B37F8B
-:10BA50000F3DBFC5DF44A5C3FF213D1FEEDF47E516
-:10BA600008FF017A9EE7FF98CA91FE2FE8F928FFA8
-:10BA70006754E6FB8F5279ABFF089505FED3548ED1
-:10BA8000F69FA4F236FFF7F4DEEDFEF3548EF1FFDD
-:10BA9000939E8FF5FF48656B3C619829402FB6EA6D
-:10BAA0003FC3152859484487F1B6D6F7157DBC32F7
-:10BAB000F83986718F71D502ADD39F0EFEEE5DD23F
-:10BAC00093B91609E1C5D8B407FF8EAD1B63F7E241
-:10BAD0003F24C69A722DB47EDFFF3FFCBD25C38F85
-:10BAE0007EF900DAC7FB2D0CED63A0FE55BFFB51BC
-:10BAF000CE9E68F4C3960CF49663FCE577F1DE62A3
-:10BB00002CB727707FE4F5046E6FB72518A87CBCAE
-:10BB1000BF8DCAE2FB93C3294E15756DF3BAA4D845
-:10BB20007DB5FD1F921438C41747F6E21AFBB9D64B
-:10BB3000768BADBFF923C6751C7546167433C046A7
-:10BB40006EEFE52F43DD1B614AF288EA1731CE2301
-:10BB50002FB4D8EAA210CFBFF913B65FC098D302B2
-:10BB6000E53309AEFDA8177E088A73837184BFEAA6
-:10BB7000C113427FD1FE3FFF5FEEFFF8CFF5FF77A5
-:10BB8000858F6E4D749E4A40BFC0E8C8403A8C58BD
-:10BB9000D8438C82F7A7AD106CC847D3170DC847A0
-:10BBA000FE18C81C1427BD37924D7576E0974524C2
-:10BBB0001A14FF4232DF05E339CB9807FD89128959
-:10BBC000115F96340A6E99E2D08EB0B160BFCB148B
-:10BBD000BE2D595A6B9E0FED2A7AF0781973F378BF
-:10BBE0009915FE877234A77EDD5E0A378A97293E53
-:10BBF0007609FD5E609D399BDAC763E7639C7987B0
-:10BC0000D98676A3A221209E1B10370B8C9705277F
-:10BC10008646A1BC323BB3F3387748E9DFF07B2C92
-:10BC20004C12A3AE8E17353E2B31A93BE27194988E
-:10BC30001E8EEB980BCDC9E10C4B49EA8EED5C40B2
-:10BC40008B162805A36B303E077CCA48575F6DB042
-:10BC50007B3D8CEB08D813291385DB35D88CF1C8D4
-:10BC6000CF7BB3E502518DFCB0AA0D22F9F5DE853C
-:10BC7000FF5C8271EC59F1465A074CC3983B8E6FBA
-:10BC80006757B72C50BF8477DF6B02C55D653637C9
-:10BC900006E3BA9AFD10F26B9D8BA3C7E5209D9633
-:10BCA000761D68415AC98E4F93BA69E8B3A88EF0E1
-:10BCB0005A1213C9E9B3C3447E2DD0A716E933CB7A
-:10BCC0006D3AA6C5F32576D98CFB31254BCF13BD34
-:10BCD00066B7D14BD7AEA2BE89E80A74D23DAFAAEF
-:10BCE0003EA1C6D18FFD1CBD86272AF14D855E1869
-:10BCF0003FBF0B2B1F8924FD50BCD0935CADE1D31B
-:10BD0000C07D89A41943C29D200F053D393D98D1BE
-:10BD1000DE0DE9F9FD8A6CA257209D0A7E9A4EF449
-:10BD2000609F87B28D309E7B13D9D409F07CAA1214
-:10BD30007FBDB76E7401C6CBEF4EE4FAF223587F95
-:10BD40003A60FDF9718D953940351FA8B111FCD7C6
-:10BD50009A1882FF562351F9594D1A95C7CCACACAD
-:10BD600041235FC000661CDF5445AEA626AAFB52E5
-:10BD7000F36230EE5EF0D3816C03AA50B9A170D4A7
-:10BD80004DB8BE002468F033A928987C6915F69A4E
-:10BD90006CF931A83F9609F68D4857E7505D7B96C0
-:10BDA00096D906A3FD32727E02BE588FFC77F798B3
-:10BDB000485DFB3B97C6EAE0F989128DAFB0205190
-:10BDC000F7FC9EE27E3A789A1FD6F3F0A924A9C028
-:10BDD0002043FF17FF62227EBE583DB8FB7C0E1346
-:10BDE000DF05E2FF9859A63882BCDE6247FDF76D99
-:10BDF00010E7EF6FFF2ABAEB68DD2B53DCE592D535
-:10BE000026E13AE5C1E9721CD63F180C2EF900C4B0
-:10BE100097C8307EC05EB690FE9CBE5A6032CA881B
-:10BE20008FD17A79DE4B169AE78CD5227365129FF3
-:10BE3000C461FB79D112F5776FA2D480FCECDB688A
-:10BE4000B1AF87DAE95EE57D6120ED8354CCFDDB9F
-:10BE50006123CA434A4B06C6F78BE33DD1A807CFFF
-:10BE60006C30D1BE5785B8AE34044834E7776F8460
-:10BE7000E54A247E84DF531F47AFC3F9B7CDD74DC2
-:10BE800071116F1FE7B38980CF53A5EE0C5A273F7E
-:10BE9000C2E3F1EDF1C2484FC986306923CE77BACB
-:10BEA0006BB02D5D6B0FF9BEDF7493BD9B3D1DB96B
-:10BEB0003FAB07EA81632B4C05187701BD3F0EF1BC
-:10BEC00074AC3ED2B09C16555B88BF4A8C9259FB2D
-:10BED000DD9215A283DA837E2F447BBD5274B1C1FB
-:10BEE00008D753FFF252C185FB4E492CA73BF2ED18
-:10BEF00003F70FEE8EF398D2C93EE37720332ECDB1
-:10BF00003ED6ECB745A71BBF97E53516F5D78E9FF4
-:10BF1000C781925C4B7BCD453A6D0EB22F9750AFE7
-:10BF20002686E33AF5E441B01BF08D59754D1912A0
-:10BF3000B05EF903DB890E65E31A523CF0FC63AB9B
-:10BF4000EBFD4498C2B73D1A9E1A8A71A2C6E7E378
-:10BF500064B4830BF8FEDAEC9767F5D1FAF3EDFDE4
-:10BF6000091663C8C1C2D34D00BCB824968FF89D92
-:10BF7000CC1A94F8859BC627A1D2057CD8CAF9FEB5
-:10BF8000DB74837DCA812C447FA80DE9A2F677D4A7
-:10BF9000C4E35C9F270A3A3B1C9DC4E57BBA81CB76
-:10BFA0001DDB25109F02C13E4DD2D8CB2AB682ECB4
-:10BFB000654CACC870DFEE646284A217B8FD9B8349
-:10BFC000F60FF7856D02C947F9268BDB0DFC9598B6
-:10BFD000C4E573B6F9B5A70662F3F86A337E67D68F
-:10BFE00056813D034D4F99DCA52DB82F655BB728D1
-:10BFF00082DE33D9DDC8A78A7EB7824240BD3013C6
-:10C00000FF09F515AB04B787F8C549766806C64D34
-:10C0100070FD8F7A5EA347DAE9F700BD7E1FD3DBA0
-:10C020002356AFB72FCEE0502B8E73F62AEED7B63D
-:10C030008D4764570057A52EF7DE71345E81E222EA
-:10C0400081DF9F89E3C3F1C2F83CF6EB1F4FA99D46
-:10C05000CB6979BDE07677303E15AFE1C39884F6C1
-:10C0600079CE06C18DFC382AEA7EC2EF6CC06F24FF
-:10C07000E2557686DD05702930929BE22B1CFF5538
-:10C080006B39FE81CE9F68EDEE37513E33E2F51BF2
-:10C09000B09F32EE0756FF4074DF0BF445F99DB5B3
-:10C0A000D96DC68DC8D3AC3E2C04F97EF5C77B7123
-:10C0B00059F0CDAA37BAE1FAB538C2936C00BD1574
-:10C0C00029473C5170531BFF05DAEB767639003F68
-:10C0D0003273921D6A8727EB8A16DCF76E473F257D
-:10C0E0002E761FFE0BF073DF06D11194A16BA79C77
-:10C0F000479089FFCB641FF9096530CF3A1B3E9505
-:10C10000F3112FF7D919E9DDEB1D6FE03899584C81
-:10C11000FC89713DF443FEDDF106FA1F85493FEFCE
-:10C120007F04EA9140FFE34B93C3B010FDBE8FF94B
-:10C13000BEF845A3A737CAEFC5A8043BB468D3A38C
-:10C14000D103BBA39E57F568A962B7D47EEF437BAA
-:10C1500005F0F1D56F8421DD55FACF443B91DE66C1
-:10C16000271E9C0EFDC3F71EDC1E44FD9F1D0B7693
-:10C170000AFA2C7EF6FD30A6D17F0BFBB82A92502E
-:10C180009FA8764D5C176703FE52F5E5D5D65D9DF9
-:10C19000CE2B24605EA1FA7995E0BC32DBFA9BAE2F
-:10C1A000CCEBEBA57C3E4757F0F9CD68372F6EF707
-:10C1B0001F7CDE6297C92FF044A31C7EBB596475B7
-:10C1C000445FEE375CB2023F0DC0F8CD0AB2EB27F8
-:10C1D000A39984719D4EEDF74A0BF905B3B6F1FDB5
-:10C1E000D653C2F0EEB4F1FFAE27EC2194EB2D2232
-:10C1F000433BD4369E56BBBD2A295A63B7AF116F55
-:10C200001867457B5609A843BEAF6CECCEF09CCBBB
-:10C210008AE1AC41A47D782FE93160218A4F831FE8
-:10C22000AE8B375898DD6A453A75127FFD47F2F9B3
-:10C230002973091FBE14C4BFFAFDAA2E1E5377F43A
-:10C240006B360BE4D754CC1B1E369CE17778DC6C44
-:10C250004B12B753DB143D2738AA292E063E8DED2D
-:10C26000711CD75A1E1F66EFB006C42FC2143F368A
-:10C27000F07908928D150FE471792BDAB51003D996
-:10C28000B5403C7CAD7CA7423490FF5B6EE67EF00F
-:10C2900039819FFF7847B18FEF24717FF8FD241E0D
-:10C2A0008738877E20F47BEE268BBB5640B7D54877
-:10C2B000EB64E3308B1BFD19A335C42366207A8D14
-:10C2C000DFB5CA33E06B0A6B31213DC7E5DCBF093E
-:10C2D000E773B827B3895DA9DA89FB08934933303E
-:10C2E000B6DFF4E57B188F94A1AD086B85C93927BB
-:10C2F0007A63FBB508C3FC0F0735BC877196C3F1A1
-:10C300004686FB02F2DB16B2FFA611DEDE14A7ECB6
-:10C31000C258DD008CC7EC598C7CB4372632CD0670
-:10C32000EDA71ABBD845AE7F469EC7F196097CFFA4
-:10C330006691371BE973235B643B6EA5AD85AD57F2
-:10C34000227F8E7F8CECB8CA0730A6F211F08F21C5
-:10C350008C33560EE15307035E09FE2169DE8455D6
-:10C36000BD70D344EA8F742E4FF019713FC527304A
-:10C37000DF7AC0C31D393EA303E9E5600DE3817F89
-:10C380003DFB9880DF4111C0EFDEE54918857860FC
-:10C3900069120B87FAF14689E05E052C4254F60DCE
-:10C3A000308E7568A8407430582513CEDB59200CA8
-:10C3B000C47DD1F285D736CEA08DBF99B06A18C0A2
-:10C3C00006035FCF3EC4D7B393E523A3C84F1AC675
-:10C3D00004E4C3AA880613ADA3415E70FC03A01B4E
-:10C3E0002DFE261BBD7C7C6530BE5C948B24E2E375
-:10C3F0007BAA05F227ABCC1DC735A293D57D399B0F
-:10C4000084EDE7C0BF90AFE7346E4FC6EFAD103894
-:10C410001FCC51F9EC55BD5C0E4E66C4A79DF1755D
-:10C4200096D27F56B2819FE36AFD5E03D9DD398DD6
-:10C43000EF1FC2756567FD57589887F0F2B685E221
-:10C440000782C19744744144021D26A33F092EE28E
-:10C45000C064EE27AAFC598AFE4722963C2E620051
-:10C46000E589F6B0ACFE7933222DF0FC11383E742C
-:10C470000E68F686C0E79AB88AA8D33B14F714CCA6
-:10C48000BE19381EE1E6203BEAE3C9E6065A9707E3
-:10C49000B633D5733FCBB494FB59B4AF06B0650542
-:10C4A000F73327F7F2F567A4E76CF9423C6BF58B9D
-:10C4B0004BF9A7E179B9CE2FB6601C01E35EABB9A9
-:10C4C0003F6854FCD792157A7F61F2228DBF48DD18
-:10C4D000FA2A70BCA6478229EE62417F42E307FC3C
-:10C4E000DD5028A31E96138C74FED2C402FD0927CA
-:10C4F000E3F14CFEDCA8F88923934DBA7D3779042B
-:10C500004B433C14A31E4A4455E35C8AF1BC0B2CFC
-:10C51000B41EE366A3C44728FE575CCBCFA505C66F
-:10C52000FF2E54BFF72CB6C77A7C3EBFCB4F71B8F5
-:10C53000BF09CB52A77033C87797C3975C281FA059
-:10C54000A84C28EF41FBBF41583084332107BFEF8F
-:10C550007916FB97CD561BEAADA783C3A89F050BA1
-:10C56000048A0F2FB27179FBEACBD0F5A8A7D47853
-:10C57000EF92E199ABF1DCD26F92774FB0F646F5CE
-:10C58000C0E8DC1218C64F1C309FA2CB203704BF76
-:10C5900037C1110E7CFE9E6F8A15F0B46AE37B13DF
-:10C5A0008CC08FE77EEF7B0EE11736EEE7F0EF7C75
-:10C5B000714108271F986004393A57ABF6776082BB
-:10C5C00003F7DDFFC0E13AA897012E46FD86F31E72
-:10C5D00022D0BA7F23DAA5E8B6784FB1E11D5E8E8E
-:10C5E000601EB49F576BF7A764E746B4D762E8B103
-:10C5F00050F42FB6A63A08DE92E87C2C19FDA083F1
-:10C60000EE6ED118C732B016A40BD8314747FBD213
-:10C610001B93B8FC6E4EE1FDA9F8827E9E4E8EBE45
-:10C62000FE7E6E69DF8FFBDF194F9754E8275BD7DB
-:10C63000CF4BFF4E3FE501FDA87E1B38C012EAA993
-:10C64000D3698E77719E737EE318B115F5CF7E9115
-:10C65000F8F4FBEAED2968F7BF7FD51289F66FCEB3
-:10C66000EB3BE34A318EA0F845A79B3E334BF07E6F
-:10C67000A55F640ED0D3557E81CACAAD4DE6FC7469
-:10C680003C57DB64CED38CAB5C192770BA7182C681
-:10C690008FD997ACC69F57D278E7BC7ED288F49CDE
-:10C6A0006368388EE78FD9101EF70A9CDF16E5BD48
-:10C6B000C378DEA08338C047C9DCEF88E9E7D88FAC
-:10C6C000F3DB8CFA1CF9C5C0CF8704B6EF9EC2FB22
-:10C6D0002BEEC2F57CF6417BE9015AF76518442838
-:10C6E000071DAA3697C0F30389230E25771887F410
-:10C6F000F13864238F431647B4CC0363C622522E0D
-:10C700003C81F276FBD3AA7C80E8817E29B0A870B8
-:10C71000D0C491C3789C0BE14B1B0D4FE239C2E6AC
-:10C720002E2DBF3A80F66159285B0F7276EFE0D06C
-:10C73000B82D308EE972B800B6930DB784A64C833D
-:10C740007627128647A4F0F327E41F9E48709EC503
-:10C75000F179E3830DE08C309799C7B35C1F88149F
-:10C76000CF726504BBDC1DE0EBB482CF8814EE9F72
-:10C77000351B609C03711CFC7C2FFCC56DC178D3FC
-:10C78000C23E02F29DFAFD5B1387774DC96EFBFE38
-:10C79000AD89CE9F92A3B5EDC319B6BFD671FC5338
-:10C7A000B1A75D5338BD9CC380BF347A7FC2C860D7
-:10C7B0001D5C34269239B4F1CDA2581D3CA93851E4
-:10C7C000D7FE9E19FD74F5632D2D59D5D7E1EF8B5A
-:10C7D0006169E1B4FECFE6EB90AF1A2F7D3A19FD07
-:10C7E000D80DA25D8079CD7A7BE3A743A97789E252
-:10C7F0005CA79A45B247E0DE9AB5FB2767590B9DC7
-:10C800003B36765D44F66F4E0C3FDF3DCBADDFFF30
-:10C8100050E3F21DED9BA03D2BC773311DED9BB482
-:10C82000C5E37F76FF243345590F0F6403F97AF887
-:10C83000CC5E9829CBDBD144F4AADB27DA9155EB07
-:10C840007A0B4C8071DEBAD5E20E82719FDD79C41D
-:10C850002C69F64FAAFC600022F1BD23663C4F759F
-:10C860002099EBEDCAC6F366867CD1783FC9754B3B
-:10C87000932B2A1AED17F8ABDBB290BF1AB2D0FE99
-:10C88000351B6C4EDC0F9BB37434C599C3FD93A963
-:10C890002CAF1F4DFD56F827125CE90F26F823B187
-:10C8A00065EBC7D8CFD3E136B4E71546F955A44BAD
-:10C8B00085149C89FB55955B3FBEF86BB4A3367E0F
-:10C8C000AF63ACF84916D68FED6333D475C5F10666
-:10C8D000513F2D23BEC842BB5480EB02785EBE257B
-:10C8E000D785723FBC2ED486722FE279B20EF874CF
-:10C8F0006A0AD72F262F1FEF287F21F5D7BABE4F00
-:10C9000049A0F9ABB0297A8311F5873A0F13187C47
-:10C910002C6FF3F7A3B26A6BA111CFC57F90F67CA1
-:10C9200014E209DA876099347228E999EFAB078736
-:10C93000B30EF4965A5A143D3C19F530F45794E668
-:10C94000F835CAE5B847BC462BEAD110AB0DF73F26
-:10C95000C6E50C904A35F311DFB91B5712E0ABF86E
-:10C960004CE8074C8652ABB7A776625FE41483E2CB
-:10C9700017D5F2739DAA7E5FF504C375D8147E5651
-:10C98000AB55AE2A94F6EAFB2D02F707E46D3CAEF8
-:10C990005F91E67A12C7DB329C4DDA42FAB425AEDB
-:10C9A00030F4971B7F98B185E81C66930CB8AFA054
-:10C9B000D6AF6E9D0797EFABCD63B1D2FE23912D1D
-:10C9C00040BEF8E8965B5A1CD06FD3C39999A2C6B3
-:10C9D0004EBD94C2CF35339BEF32E98B5DC112EA75
-:10C9E00081B1B8F790D5E6F7E379488C6B54EDB296
-:10C9F000ACC7F3605561B0CE87EF8FE9E77A09F1F4
-:10CA0000D1B43BF722DEA371E0C20CE4DCD138F8EC
-:10CA1000229EB3775841DBD8D10F72BC4CFABF933A
-:10CA2000F15E4D9F258D9C1385FEC4F73024B4B76D
-:10CA300060F7B30E72D889F8722DE5F2E752E47010
-:10CA40009AC2BF258A1C4E3372399CBA2ADC86F101
-:10CA5000CE924784FE785E8E49A176540126E4CBBF
-:10CA60004CE44FCE97E5FEAE8A3CC72BFD70FE0F1F
-:10CA700094CF4A7F24B553E5F4E534D7216EE75AC5
-:10CA8000B216C0B86E03B946BDE75AD8230BE5A469
-:10CA90008D4FCC36E427E09398520D1FD435FD68B6
-:10CAA000443E310D13884F2C50E669F8C8D9EA9FEF
-:10CAB000D8F2BBA15FB528DEB09CB5D57F95A2FAB0
-:10CAC00029D7C6EF1F28ED4B42C08FA0F84F18C3DF
-:10CAD000F8DA852889E2A47397C1200105734D9E79
-:10CAE000648CC3CCBD3F88E260A507AB97844AED58
-:10CAF000E975B73F83F69727FA93A83C90E83A8DFB
-:10CB0000F898E6BF53C163C635EDCF653B78DCCD01
-:10CB1000E4B6D8D7C563DCCD25D27E5C6F667B9248
-:10CB2000EC94BA1FC7E36E18CFC3F85EE0FE1AC6D6
-:10CB3000E1703D6D8932E8F609DBC5E386EBF7D39A
-:10CB4000CA9B3E196480FA53F10E8ACB79FBB88CEC
-:10CB5000A9308FD913DCAF9BB4FB6C0A1E1B8C9ED3
-:10CB600064B4A30DD51C3F0D2BC402DA6F622CB840
-:10CB700050735EF76A7C3CDB9F48F851ED8BAAB797
-:10CB8000B7D7D0A1CF56FD7D35BB53A1F07B05F2C1
-:10CB9000BBBDBD9D51F935909F55FD6C8A3E487ACD
-:10CBA000E8367805FD07555F17E40D1D86767EE8AB
-:10CBB0004B895BFF0CF38F4C7365A502FFDCF24AD7
-:10CBC000EFAC3500DF66741B6D21D7A20F7F349167
-:10CBD0003E7CA490913E8452AB0F4D9DF8E1B9A9E3
-:10CBE000D7A7CF5395F6E0C772FF10F4B5B6BF8A4A
-:10CBF000B4116370FC85A9DC4EFE52E3EE4C8F1736
-:10CC0000A6AAF2796D7AFC66A5FDD5F4F88C54AE2F
-:10CC1000C703F5366863D2DBE7DEEE4B71B2C30CB7
-:10CC2000F43CDAB3C6606963BCE69C7B9770B75688
-:10CC3000AFC7F49B3E03F9FD1AF4FA7D88BF7F5716
-:10CC4000AFE7176E26BF0AFE9CE36F86F5C76F61DC
-:10CC50007D87F047B0BE8B6F2F0F817210C8F7B081
-:10CC60001ED9FA318CAFF9A93E1477003920BEAF36
-:10CC700000BE473950E5A572EB8070DC37607F114C
-:10CC800019EAFF403928C87BC588712AD4E388AFE8
-:10CC90003D20F3A86702ED843FD5B50AE7AFCA830C
-:10CCA0002A0757E7A39D265C979ACACF733D0FA525
-:10CCB00056CF77E6CFFCE13AF9FFD1D46BF3035EB0
-:10CCC0004DE5F7207E41FE7935F5DAFC82D752FF3B
-:10CCD00023BFE02DE21FD49FB87EBBFD437BF87CD1
-:10CCE000CE3F742E11F8210BE3CECD837ADB314E8B
-:10CCF00073FB15EED7834E27BF3ED0AF9EACE8BF87
-:10CD0000A94A9CE0409AB32595CB2BF9EDC3138338
-:10CD100007A0BDBA567F6F725435C338D35428B5B7
-:10CD20007AC28274EBC05FFF6BEAF5D9EF3DD7485A
-:10CD3000DFE3A9FFB19FE7BB167D90E4B04E447CD2
-:10CD40007EEF3132C4D3D5D603A6D51CCF2ABCD8AA
-:10CD50006354ED6624DA4DE08FF3FF097F8CCD6BD1
-:10CD6000B86805BA86A7198B301E78279EB5A078BB
-:10CD70008669952309F50D53F70528DEF191A8C2C0
-:10CD8000E68323611CB73FC9DAF60DA07ED4B0F06C
-:10CD9000D6F888C0DADA87A5890757D0B8F97915A7
-:10CDA000E6F21AF93E990267011CAA817302E0B506
-:10CDB000BC7D98D1CB6CDA7E14FD33CEC6F705DA94
-:10CDC000F6F37CF95DD1FFDB2AD8707FE19E61E745
-:10CDD000CC18CF199BE7DD1B0BEDE2D3428B42C091
-:10CDE000C4DFB355A0F10ED814B54A4EA2235B0E92
-:10CDF0003C6F589EC3F74D2C0D4DF98E0EF87040C8
-:10CE00009ADE4EE19FB11BC5C7E8CFD22030731622
-:10CE1000EF2721FEDADE47FAD1FB09F4BEC712750F
-:10CE2000EDEFDF358C39DC1DF0D12D698A3EC4B8B9
-:10CE3000B0DA3FD0646283E0E8286E73ABD2BEC53F
-:10CE400060A86080A7F19BD25661DC6B14E37C5133
-:10CE5000B829B548E6FCC71C01F3FDB9F166A7E99E
-:10CE6000D767F827E9DFF7FC1CBE86B6C39742FFF9
-:10CE7000323D9F841B9DEF7E0FE3088F126CE8A765
-:10CE8000563A8356B070A4BBC2D7F2C022C73098BE
-:10CE90005F10D3C5F15AF95ACE2C42BEAE646AFB7C
-:10CEA000EC55487FA7A1B53DE7F346A1F5FD342336
-:10CEB000C34FD0FB733665ADC23839D083EA09362B
-:10CEC000FE0C9F3704C0C302E4827198E412F5326D
-:10CED000E027B983FDDBA50A7ECF0AFC7C53CB0893
-:10CEE000EECFB524F0F2C534EEBF3DAEE0F169A55A
-:10CEF0006CE9A2C143AF363AC39F07D7039A7913AF
-:10CF00009EEE8E52E62D4F2C1A03F36A8960FD05C2
-:10CF1000E093759BC6AF5AA4E193E7374D2C423C92
-:10CF2000B4F627171E443CDEADE0E9C54D130E22D2
-:10CF30001FE1911394B78A1CBEFF6AD9FA7187F278
-:10CF400036B73DFFC8985FA1821809DF131CA62CD5
-:10CF5000DE4F4207F859D0FE7D47C0FBCC14753D2B
-:10CF6000EF2BF4191340BF8200FA8D0C808BF57003
-:10CF70009B1F0C3D83FF54B263E5E26E183FDB2438
-:10CF8000D01D2BD0CF66019E37A6DD5B14D203F9EE
-:10CF90005432C5425B4FDAD483D6BE208FA8BF4837
-:10CFA000FFBA485F4F443927785A91E346E49BEA39
-:10CFB000C531D07E6F5AC92ABCF77ACFA2952644D4
-:10CFC000FA0769335619A1DFBBB3FEB417FB330A66
-:10CFD000A507C7083FC3A7F501F3581B00CB01ED18
-:10CFE000575D459F2F0A78FF9180FA1501F0EA00FE
-:10CFF00078A9FEFD6933F8FEE534A01F22EE6AF23F
-:10D00000E24D6B5D37B4DA2F01EDD9877A7EBFBD73
-:10D010008EC327373D50B4344403A7FDAA48CBBF85
-:10D0200026C55E4C8E723A3AE2DF439DF14F5AA01C
-:10D030005D9375E7120F33A6B3BF7B443DDC24AA92
-:10D04000F2B5F0E0BC74CD7EA05C5B84F194CEF7C9
-:10D050002BE422DCAFB8FD71B57D4D9143333FB574
-:10D060007DFEBFAE88F8BD2B6935451B68FF4FD9E3
-:10D07000BF8BE0E52D97AF84215DF2F1FC28D677D8
-:10D08000F124CF4DD7CC8F35A4E0FC9A1EE6F70DE6
-:10D09000E53AA007C87909B3D3FE775378F8821729
-:10D0A000A0FD9E87C50568BF0E2F88A4F346E3FB4D
-:10D0B000727F7B4F789F6EF701DC143CD58C71D565
-:10D0C000A6474751F98EE858E203E4F7EAFB5851C6
-:10D0D000485FAC0F27BCC4BCB4ACA816E420B6AF04
-:10D0E00044EFBB226CDD76A01FBADCC470FF89312F
-:10D0F000FB73C427BFB3909F3AADB61FEDF794FC06
-:10D10000BE30BF07B42B596CA2F83FFCD17D0CD7C1
-:10D11000F25166AC9FB14829E55BA9DCFDD31B1F2A
-:10D1200066D0BE8E48E77676F9238E8324B3AFE5CA
-:10D13000FE745FE1A8925F656B5F576A5F18C7D79F
-:10D140006792285F0AB3496113D06FBBC191D6378C
-:10D15000BAADDDEE9F44DAAF7AEB4C4937DCDF1B2A
-:10D16000D897F3CB2E7F49B7128D5D2F3D6B243CB2
-:10D17000EF364BF3506FECEED25B90496E1B2231D1
-:10D18000CE3A43F19B814F16BCD1011FF6E92B1219
-:10D190005E8E5916E05958D6F4DBE861382EF5BD9D
-:10D1A000EC83AE3ACC1763EA250DD4FAC7B9C9238C
-:10D1B0006EC6F1B6F1D706D2E7E41F033CBAEFBA68
-:10D1C0005532D80FB607FC7A1C4794231FF9493D06
-:10D1D0008FC7621A52B47185363F74A122FFBCDD3D
-:10D1E00057783818BEFFD5AB4174EEEB2BF98B5056
-:10D1F000AD7FACCAC7CCB0FF39DC42EBE2704988E6
-:10D2000003BE31D61C7F08DE2B7DD6447AB3F4D919
-:10D21000E8477C580FF4C42DC3C0EF3EDF979F074B
-:10D22000E85C3EB6148DECA5958FCD4538DFCEE495
-:10D23000637ADFCD9DC8474D37E4A3FC674D74BECC
-:10D24000BAB84BF59D18472C36DCC8EA607C239EA3
-:10D25000FD5537DC6799F9AC85E8EA0D0D3DCEE761
-:10D26000D5271EE7D56A7FFA727DE5ADCD257B21F6
-:10D270001AC03B03FD2D2E31D17A44EC6626BD2722
-:10D2800086D9797D1716BF10ECF2E2D01C09E9EBC4
-:10D2900056E401EA25E4B3BCF049B7E1B996C30B03
-:10D2A00012691FEC6416DF079BF5D0F361E87F7EFF
-:10D2B000358F9FEF9E8DF976709DFB6FEE7B552924
-:10D2C000F976FEB7F6BD9EE8ABDC1B6ADDF7E2E758
-:10D2D00040F72CC8CCE278619205F1143780F072E7
-:10D2E000AB95494180173182A5A0FE51F7BDC45FBF
-:10D2F00073FD241A045AA71FAB91297F415E9895AC
-:10D300003FFF35BFB7273E55C8681F2CAA9AF6C104
-:10D310004211AF18BF159813E5E768903DEEFE7413
-:10D32000E4BF20A2E7CCE7667DFA872CA4DBD828EF
-:10D330005D3C41E13FF5FD13B537D1F84E08CC8691
-:10D34000F63EEF8FA923913E4DA2EBA9BB496F0694
-:10D35000D3FE39B3797F3718E099B5B0CE66C837B8
-:10D360003DE212D2DBFA99B9F0E114A477DE1F8313
-:10D370003C78FE66C6A2A0D5780EA3BC91DFF39ED2
-:10D38000B6EC7B3A8FCBE28DD518E7FC7A51103F93
-:10D39000A7BE7530F1CF34033FE7C2E2CC145F2A59
-:10D3A0000F51E05E39046BEE2F99911EEAFD9BBD93
-:10D3B000A857E0FBC7557CA0DF887A573D47CFAA26
-:10D3C0002594FF6283D0E139AFBFF5E5FEE9B438BB
-:10D3D0003B9D17AD78CC625F18CFE92C0EC2EF32BF
-:10D3E0005A1755187CF9ABB15F0393B6D970FDD0CD
-:10D3F000528AEB6DB63595F210541999D11C01CFB4
-:10D4000025AECFD4F1544985B7123F19D921630411
-:10D41000E2B1E5D316E48F85A112C6452ABADA5DDA
-:10D42000D46FA8D5C6ED84F25D1C7B22F281DF1C8F
-:10D43000817CF0A960B0F0FC030E03D49F63BCBEF6
-:10D44000F53B8B96A5D3BCAD36C3881EC877E7F3F2
-:10D4500057C37BB73229A107DE135B1679E724ACEB
-:10D460007F4D24BD04C2F4580EFA7BAF8999B84EA3
-:10D470009DB66C0FCD6FCEE6017883804D7BFD00AD
-:10D48000D9A7390A7F7995736B25006F463C2A7AB4
-:10D49000C125B26A8A8729786CC5AF525FB1CC4486
-:10D4A000F4A8586C213A57D4FE8DFAAD086DE98680
-:10D4B000F4A8D866A2FC1DD61BF83C4A6A7B0F3B39
-:10D4C00004E32E3185DB0478542E8F35235C5E2FE8
-:10D4D00010AC7EAF62D95FBB19D2797F585A0C7CF1
-:10D4E0009FB5ADDFE838B467A75F8D8C9BA6A1FB25
-:10D4F000E945DBC370DFF968902719CFF9FAEE0F21
-:10D50000B2E3B942359E767A5132BF0F646B09C5DA
-:10D51000FDEA19F31223D0CE1DB679CC587FB8217D
-:10D520001E8FCC3187CD360C6187F146824F2BE7B9
-:10D5300048E80FF3070A9C6FCA5FDD634E80EFF582
-:10D54000BF81E3E7EC6B47F70E417C001FD950FF2A
-:10D55000C4B5A4A01DAE30B4A4C4227D5E16C85FBD
-:10D5600080F5A903F38F54225F0D047DA8F055E5E3
-:10D57000D6EDF3513E2BDE3C998F783D3B969931A9
-:10D580003E56A1CC1FD68FEF1AA17DC59675F98C9A
-:10D59000BFFF2EF29D6AEF015E6402B8D9CCE18C28
-:10D5A0001BB87E6E367B29EF5DF39D8CD1FE999181
-:10D5B0008DC47640797E0F401495FB69D531137880
-:10D5C000DE3D597B7EAE12EBD3DBEA3BE39BF137CA
-:10D5D00018143A5BC82E8D47BC00EC5DB62D0CF9D3
-:10D5E000E2EC6B7BF60E41B9D822D898561E54391E
-:10D5F0008CF3F17AC0DF1388BF2DE7F3310FC5EC50
-:10D6000033A112D250C5932A6F2A5EAA18C7838A03
-:10D61000972AA38227A5DEA9E0A19CF9A83F76A6B8
-:10D62000BFB411FB7FF347DA6F3B3B8D09FC9C30A5
-:10D63000CF8BA6CECF15A1DFDFAFBD81F3FD146583
-:10D640009EE5366E17CBA398543B80F8CC6156F319
-:10D650004B4293B39B8FE8C6BF5A9183567AE33C03
-:10D66000609C5E03BF2718A8BFE6297C75A476B22C
-:10D6700007F5CA6C19FAC94279B04DC17D4EF6BAA8
-:10D68000A8E86FB0999AEFE6BD7284F81074971409
-:10D69000016B16D3261807FA5F677A53BC30AFBB0D
-:10D6A00097E6BD718C8D19409F1C11BCA13BD01E0B
-:10D6B0003C24929E52C7E9903F247A381AB87C22C3
-:10D6C000BF607CB0552F048CB75619AFC560F7E228
-:10D6D000B960B650A0FB6BE2C2B3A187B8BDA34846
-:10D6E000625BFF37BD8BFB918E8B61924035762359
-:10D6F000B6ABBC189680F6FB88127738B2787B58A8
-:10D7000089860E4F75F69D258325A47F5EC8A18767
-:10D71000518E1E53DA359BED2317A03EB81426E137
-:10D7200079A9E608391DFDA866035BCA22381F1ACD
-:10D73000BBB5E10FE485F007F5D293B636B954C70F
-:10D740000D74F320DDA0BD83CB919DF6312AA3F8A3
-:10D75000BEE8D5E529D34BFAA95690D667B5B5539F
-:10D76000EFE53DAACC9B64A45B9B3D40FE447B67F8
-:10D7700051F21805E641BDB557D738C45F5588D575
-:10D78000804BB8C0FA40B86D3D556D443F9F2D8A1F
-:10D79000D9ABBD97763448A6FB67BE1E225B0FF45B
-:10D7A000A8BDFF7D7E9EB791DFDB52ED34FCAD68F6
-:10D7B000E53F78AF2CEB7C3EEAD717732D74AFA909
-:10D7C0006BBF04FACE29D6601E8EF6FFDB96FC30C6
-:10D7D000A96D7D72D3458F184EFE42BC6E7D507E82
-:10D7E000E65D92E70AD642F7B1A72D3B307630D2FC
-:10D7F000FB25139D1F98511F4F76EEE486E999385B
-:10D80000DF698B93099EB5F13E0E2FE3F90FA72D2B
-:10D81000CE7E01FDAFA3418E7CE467DF4AC186EB7B
-:10D82000ABA11BB31FB907EA8786F6E98AE3FE6A54
-:10D83000C3D1B148F7AF1688A49F1C1B9EBC13EB45
-:10D840001D3B44BC3106EB19DB2398D79419C36DFB
-:10D85000E817A8E70BEB4C5CDF9E51F4C231454F53
-:10D860001C53F82FAFAE2E05FD25DF3AB047B8EFB9
-:10D870006DF695D2F96EC1665F0FFCF2AD2013CC48
-:10D880006CB684DA5CBCCFB296F2E39C4BB6D8D0CF
-:10D890004FBED7C2ECE8D7DEBBBBF7405C2A38945A
-:10D8A00075D5D848FE5D155FEAF74F2BDF65E28A34
-:10D8B00052DA7788941250BF352BE7C68F2AE33DA2
-:10D8C000B9E8A53BD12F38B929398269F07E52C910
-:10D8D000D3340BF4E0960ED67BFE1BD4B8839BBEEC
-:10D8E00053A6C403F799EA7B61DECFC0FB5D27D660
-:10D8F0000559313F6FE03DAF13266E3FDADDF7DAB1
-:10D90000A18703F3DC068EA7753D1378FFBF5F4840
-:10D91000877EBC2A6781EFB7BB4F9E746DE7AB3043
-:10D920002F19DEF7DE7303A3F74606FFEB0DD4D7FE
-:10D93000A5F5161BDEBF3F1624D17A48CE66D24627
-:10D94000B43356291CD7F3C7F665D2F9BFD22F19C5
-:10D95000C955E956D18DA98ADF5D99FAF83080EF73
-:10D96000DB6AB2E3FB2757ADBC938B993ECF420EE7
-:10D97000E3F23913D6491E5BDBBA2870BD347BF560
-:10D9800066BA47F84BAD97D4385220BE73FBE9F323
-:10D990002D04DE9FDB0D6C9333B03DBECFD4B86851
-:10D9A0005DF45D4D1995B90DEBF26225BC4F71E444
-:10D9B000B1A12837A1E1140F3953534D9B78DFED06
-:10D9C000C8BC8CF743DF0A09B7A1BEF8AE66817206
-:10D9D000B940E113852F6FDADA24C6326ADF3814D2
-:10D9E000DAEF0A09A7BB2E498E9C70B4F32A5D03B7
-:10D9F000EF37ABF33BF510A7AB3ADE539BA687A1FD
-:10DA0000DFD9B426B23117FA9383C36DE86FCF54D0
-:10DA1000CEBF1C5FCDF5CDB7D6F017C6E0F999B5EE
-:10DA200013BBE1BAEE3E93CF6C877EED6F1786E1B4
-:10DA30007AFF1BA3370CEF1B7F03ED3D68278C6E2D
-:10DA400011F5DC900246FB78433C4626C5D3963957
-:10DA5000F145EE19A31BE97ADA7371CF15E4A3330C
-:10DA6000068A770166F65C81F6F6D03E1427BC6F15
-:10DA7000275F6FB27F75E1F501F7169FE8C7F5D212
-:10DA800089B56F8CA3F5F906930DC7F9DD86BF76CE
-:10DA9000C37338B3193F5FFFED2681E6311BF831C0
-:10DAA000281EF5038F83CE06BD6F15DAF361DEA65F
-:10DAB0005AE2C3D9C08716F4D31C3C1FF36CCCC701
-:10DAC0002CB176F93FBA2A7C3707F80EEFEFFED279
-:10DAD000793F96F70B3CB7CAF950A5BB8A1795FE5C
-:10DAE0006D7CC874F905231A060C8F656DFA40BD6C
-:10DAF000DFC18CDE15784F63BE185A8FF9AAF61B6A
-:10DB0000ABFF48795B6423DB48F69CA561BEBCF99A
-:10DB1000E20D768C07D699AB5BF3BA607D605E1739
-:10DB20003184BF5F88F98961BE21E9F1F4BD09360E
-:10DB3000FB2844B729CA4B710131CFE0A07B79752E
-:10DB4000165A3707EAA15714FADE86BE03FA3DFDDE
-:10DB5000F8796DF5DE9F5A82A1E98DFC5E181C7183
-:10DB60004982263B5EF9FC0EDCA72D1C1AF1AB4462
-:10DB7000F87E53BF2377E0BD8DC2CC886D0900EFDE
-:10DB800079E5EFBCFEC6886C13FA01C2D7778C44E6
-:10DB9000BFB19FE3CD7E9AEFA8FDC2F39DF8FCF3E1
-:10DBA00038D7DBFDF8BE6929D2FB9C10C6F3BD2532
-:10DBB000F9280EAABEF7B1C00EBF25B4C15E138B03
-:10DBC000C3BC06CDFDB83EEDAC8C4A77ECE5DFD7A3
-:10DBD0003F470A7D8FEB4C65FFC76095CCE8FF3966
-:10DBE000ED663BCFAFC89C56F0ABC62BFC5B62BD6D
-:10DBF0003C92EC6F35B35B3081C952FD7DACBE6D9C
-:10DC0000F7F6D65ECFBD3D26F33C7C754A1EBECEF0
-:10DC1000EE510A8DEFFF88FE65E0FDA9CCBFB4BCD4
-:10DC2000897C320EF80AED45560B87C72B7C52B122
-:10DC30007D2CE57B9EFBB1C98D7EC22CC51F4B722E
-:10DC4000756112B4BB04F28B7AE1CC384F0AEA8FCB
-:10DC50001335AC3E09145681D5E543BA34C7BF4FDE
-:10DC600079D14EACAD0B43BFE72CAC27C64017E5CE
-:10DC70008A7FCF2E8B9E5BD00F8EEFBB7EB986DF67
-:10DC80007EECC7EDFF99784F1CAE6FE4780BCFD7D1
-:10DC900078790FE5792E48189D8D71A4FD353BD814
-:10DCA000D1E4B6F73ABB8F32C43082A56BF625C7F4
-:10DCB000193B3EA7F1AD9A4F7303B7DF16633DE5FD
-:10DCC000D1025256D712ECA4B8520CF228C687A53E
-:10DCD00007085E328BD9E81E6BDB3E1DDD0755E978
-:10DCE000EFB05F1989EDC601FD51DF18AC3E23C2CC
-:10DCF000CE027E3EA52F100EF5894AFF51E2238FFA
-:10DD0000211DE62AF7B8E60AD51C3659E99C6BA016
-:10DD10007EC4B86631E94D796F2EFA63A02729AF2A
-:10DD200082A21725F81FE545CA5967A66657CF8B0B
-:10DD3000B437F73FD08F19E9FA3CE22A9D54FFAA85
-:10DD4000333AA97A12E835E87AE8A5E6299BFB2C54
-:10DD50008F77CE7D767ACC40C21B481CFA43317F48
-:10DD6000A2B8CA4C650E6C6D24F1B1698453427D32
-:10DD70003B76472C93E0D1AC1D029D6F1DB32392DF
-:10DD8000E0307F0F9E5749B1F7635FEC3E02E393AB
-:10DD9000275FF8621EE6BD1FF35B46F16343700820
-:10DDA000E59B104728791CC490F7F01EEB05C95875
-:10DDB0008DF6CAC9DAE50F3010FD9BF9395958E5DF
-:10DDC000C99C4EFCDEDFDC7DDCCECF1DCEF7052FFF
-:10DDD000E01BD0FE429148799A9E0ECE20FFADEE18
-:10DDE0000E13DD8F60B2E3135C574D52F8C112037E
-:10DDF0000B4B0DBD822490570D7D1E0D7AEC3D1707
-:10DE0000F4EF857597D013FCD8B4085DBD510EFAB8
-:10DE100006F3C79A62449B1BC61F6AEFA9EBCF2982
-:10DE2000969B309EC25CDC8F56F98B89678C746F31
-:10DE30007E18CF5F71C724FD3D49D3B0F323C9DEFF
-:10DE40000CD3FBDFCEABE46D5AA0F2535FD657C9BB
-:10DE50004B4FF6FFC2417E3F4462CED5AABCA0FE26
-:10DE600007EFE669C4CF9DCD26E696087FAF61FD3A
-:10DE700005D962C37840AB1F9E04EF45A191B4124F
-:10DE80009F635E50ED3C312FA8162F9817540B63FB
-:10DE90005E506D7BCC0BAAADC7BCA0DA7ACC0BAAC6
-:10DEA00085312FA8B63DE605D5C2981754DB1EF381
-:10DEB000826A61CC0BAA6D8F7941B5F59817545BD6
-:10DEC0008F7941B530E605D5B6C7BCA0DA7ACC0B60
-:10DED000AAADC7BCA05A18F3826ADB635E506D3DE1
-:10DEE000E605D5D6635E502D8C7941B5ED312FA86E
-:10DEF00016C6BCA0DAF69817540B635E506D7BCC47
-:10DF00000BAAADC73CA0DA7ACCFBA98531EFA7B646
-:10DF10007D0B5B948C766C67BCAB393D1AF79DBE6C
-:10DF2000257E3E742FF033CA61F3441BE52FBCCE2F
-:10DF300075624BBAB26E51F8F7120B9982E7D03B7B
-:10DF40007B5FE5CF97F09D6CB2074B897F59683DA9
-:10DF5000FA738F1A1D741F4A6EE0F7139991FB0133
-:10DF6000F345C5FF51F242CC1725F2033077B0518B
-:10DF7000339EAE0E2B336AF0105960D3C1D1CE1848
-:10DF80005DFBEE93245D7D0F579AAE3EB6CCAE831B
-:10DF90007B57E7E8DAF759E0D0C1F17281AE7DE254
-:10DFA00052A70E4EAE9FA46B9FBADAA5ABEFEB2E35
-:10DFB000D3D5F7DB54AD83FB372CD0B5BF7187AC1D
-:10DFC000AB1FE059AAABCF6CAED7C1D92DAB75ED65
-:10DFD000071F72EBEA73BD9B74F543BF6DD0C13769
-:10DFE000F976E8DADFE2F7E8E0E16C9FAE7D9EF5D6
-:10DFF000631D3CCAF699AEFDAD314774F5A3A593F8
-:10E00000BAFAF2D3DCBF6775B03EC0386508CFAF4F
-:10E0100051E9610DE85FDC9E765ED7DE1405EB0505
-:10E02000E09F0AD087E8F7FDD0258EF231B3EA30C1
-:10E030003BDEFB964754FF517BCF7BACFD47DDF7C2
-:10E040009F0E0EF304D1FAC24AF6F6A6FEFCBE59A4
-:10E050006B3E11F53E3BF3B198280A09F9D03F1207
-:10E06000F01796000E73F0BCD0E00791FF6403BF79
-:10E0700008FDCDD67591213E1EED72709B5FDCEBE5
-:10E080008A26CFCBD5FCE2DBF1DBD994A7D7D11F11
-:10E09000CAD90D9BF3719D358BC94B703F51CDB3E0
-:10E0A000B83F481FDF52CBD156C0AFE67BFB82EAB8
-:10E0B0007B0DFC19791F6D3D43ED5BFB55E25F0263
-:10E0C0004C76AEA6FFC760FD6704B9AEAF01F90399
-:10E0D0007FE8891A1BC1AB6A62087EAA46A27275E4
-:10E0E0004D1A95CFD4D8A97E6D4D0EC1CFD5380825
-:10E0F00076D71450B9BEC649CF37D44C22F8851A0A
-:10E1000017959B6ACAA87CB9A69AEA5FAD5940F0F8
-:10E11000EB3532950D354BE9F9969A7A82B7D6AC44
-:10E1200026F8CD1A37953B6A3651F9E79A06AA6F59
-:10E1300004FF0DE15D351E823D35CD04BF53D34252
-:10E14000F0BB358708DE5BE3A5B2B9E65B2A3FA8E2
-:10E15000F151FD5F6AFC049F51F621E6F71774F751
-:10E16000F154D8C88E717F0FF356601E861CD3778A
-:10E170003F971F37900EA794FE4D23C05DC23872A3
-:10E18000CF94F5759A75455D7F1EB7AC35F0FC2DC3
-:10E19000B53D99AD8EFC7607E3E7B4B8DF3E13FFDB
-:10E1A00025C1D3A89ABDB8DE28ADE679CAB3911FC0
-:10E1B000D3881FFF725DEB34655DB025D1F904F2A1
-:10E1C000230B717F1A9FD5768FFE40A2EBF7F8FCE8
-:10E1D00042F57D7BB1F54C9B3D053F32D6E289C6C9
-:10E1E000FC5FBE7DA27DBDD4F9F7AA94FB0F9DD63E
-:10E1F000EF3AD90BED55C14F22C5F5F79B4227E108
-:10E200003EFF8B0A3E5EEC6FD0957725395FE88F35
-:10E21000FBFBC9D52F3C20B4DDDF1F8F4B7C90EF7B
-:10E220004226511E9C89CCF11EBAE077802388F0EB
-:10E230005D4CA6F24482EB4F389FBB610182B06B0C
-:10E240008825AEA3F9048E67A7329E9DCA38D47282
-:10E250006E927307F6772CD9A11BCF8B4A7EA171E2
-:10E26000CCF71C8EEB1F6F9F3F2E24B6E1BB359E73
-:10E27000C2AA294F4631E3F19447312F46545B5EE1
-:10E280000C75FD50BC8FFFCE11FDA1FD9C1F4FEB07
-:10E29000DBC0BC194B86EFE17930603D86F77F8BA0
-:10E2A000EFFF15E95FFC3D28BCB73BBFCB61CA332C
-:10E2B000E39D05BC1A4B793578DE1B17203096F2AA
-:10E2C0006A50BD7003FCBF078ECB9A66A4F175A19E
-:10E2D0007C274F07EFA7BC341853B074C5BCC7F1F7
-:10E2E00034CFFDCEF3DCEF8EF2D1FDD42D89AEAF6D
-:10E2F000FAF338F953991827427EC2EFD8DC747EBE
-:10E300000DF8C92C008A6646013F75E06FA87C5362
-:10E31000A9DCC3519F033F9E407C7FB773701AF204
-:10E320004DD5AE5C09F15D67E0F7E9E40F947D41FE
-:10E33000E5F710C4F0F47574EF009D71A46F6E28BA
-:10E34000DD3B6812D982CD1DE8576B06A7F3FE1896
-:10E350009E4FB22E607F52C8E07417947663DFD967
-:10E360004779C82A9B79BC9A6579D39D1D9CCBAA15
-:10E370005AF0DBA79234F3A8DA71849FE762DE7467
-:10E38000ED392E49E957E53FD11CEA5A17A21D5F26
-:10E39000AB1C5832B2490E8EE3BDEE711629FC2E2D
-:10E3A000817E1FEC3BCC2FE3FAA38DCE03AAE702BC
-:10E3B0006730279533C17222DF3BE595747F7E3647
-:10E3C0006BA0E79539D3E310AE62BE9131B83E5AE7
-:10E3D0005AFB1E868326D6AF1CD503E635C13DED1C
-:10E3E0003D2C0B3708C76589E42806BFEF15AA172F
-:10E3F000F784EFDDF3EAF0C518B71E27723AB00FC5
-:10E40000391D8A819FC588F6F303B9E993114D72CE
-:10E4100043E357E5A6782173E0F903F57E48AB1C8A
-:10E42000E5CCF97B2CEEE1803F89FC5AB5CB12415B
-:10E43000EB53CC3383FA4A919FC546EE5FCA98DA14
-:10E4400094F427F7374C0E259F17E3FEC81C99AFAD
-:10E45000C74E99B8BC9DFA2AD48DFC3DBFCBEB7159
-:10E46000241F26553E7E9A42E77B18F81F37B7F7E0
-:10E470003F5AF3CCF462E46FB03857CCC0C4367B5B
-:10E480007ECAE01E14C6F3F23B105F7B63F8FA7994
-:10E490000EE6A1C1FAAE4E09E3A5A7A2AD745F28AE
-:10E4A00030CF1963769A9F49991F8C6C12FAD31654
-:10E4B00025AE561730DF1F82E268BED270D6C0D0BC
-:10E4C000B130DAE4E928F70F703B31BFCB6F5CF86D
-:10E4D0007D6F10B30943693E148F950DCC59C7E386
-:10E4E000B334BF0546AB0DCFE52C99267A05B213A0
-:10E4F000304E8CE74559ED3CAFAA9A7F3B70BC0E7D
-:10E50000FDF8AC710CE7E710992F68281F2F8E4F8C
-:10E51000067A107D009EA6191FF4EBA6FC3FC1925F
-:10E520000DFDB0E67F3DC0E3CBB5DC7F84F16F220B
-:10E53000FAF480F1C75E7DFC26645118FFDC0CAE56
-:10E54000A7EA700751443BDB95F4EF8420E7FDC850
-:10E550008749AEE5BDE6625C23D762C7F81DBB5CA8
-:10E56000D70BF554089328AFD63807CFAB05DD2D70
-:10E57000427E28C4BC7536F203CE68F3B0B180F891
-:10E580001A9085E2AB1330BEC6EF12BD8BF1D9896C
-:10E59000CAF9E6BEEC4B157F145F13717C14AF769D
-:10E5A000D1382D4859288330CE437470D33C82999A
-:10E5B000478967B7907FB052E1C3218718D9892175
-:10E5C00021DC4EEC3AC2DC78EEABE9C73BF342A16A
-:10E5D0007ED77923E929C013E503FCF35FB95DD940
-:10E5E00075F2782CEE07D4FEB83716FDC45D269779
-:10E5F0005885EFE75A6C0BED6D718DC643213CAE2B
-:10E60000A3C4F96E52E6D9C85AEAAAA03EA787C8A1
-:10E61000300E987DD0138CF28C396A3BDA6F1C7601
-:10E62000D1ACFB5D0B934D0FE7300D1C8F21B280F9
-:10E63000DFFFBCCE75EE6B199DFCEEE799A86BFA77
-:10E64000DDCF2C651E8F6638DFCC20BB364154F001
-:10E650002E20BE400F3421BE9FA930D3EF1A34556F
-:10E66000987B7835E3AB9FF50FC2EFEE7FFD83EC2F
-:10E67000D6EE6C353F4E43103E37CBA114777BE688
-:10E68000B281E26E6BCABEA6F5497D0EA3DF11AB67
-:10E69000BF5C427EC0A502869B48ACF6E6FF53866F
-:10E6A000F0E33759E97B81E37F1BFC790F10EA2DFA
-:10E6B000F0E73DA9E0AF803F8F30DE67C5721BF801
-:10E6C000F358BAC19FC7F239F0E7B11DFAF3583ECB
-:10E6D00003FE3C96ABC19FC7F229F0E7B1DD2AF0FB
-:10E6E000E7B17C02FC797C0EE3CAA3711D62746FF2
-:10E6F0007F6170D832F433243994FC8D8F1C03BBB6
-:10E70000783576F6E68B061D9D879DD1FFBECD90B0
-:10E710006311BADF3FC9F9B2A7AE7ED0C1045D7DF7
-:10E72000BCACFF7D9B3E0B7EFEF76D62CB4604FCCE
-:10E730003ECE6D01BF9FA3FF7D9B68E73D01BFBF3C
-:10E74000A3FF7D9BC7957C992A1D53A4D782902F48
-:10E75000D6944D08671DF8176AF984420F157EF2AA
-:10E760002171524771E4F01BB9BD7FE72BCBBE0D81
-:10E7700080CFDD2CDC8971F7DD0E03E9A5675687B4
-:10E78000501CD6E21D7212F967B78349C83FCF5CAF
-:10E790001ED105C7331CC888CF63CBB87DEA79A3E7
-:10E7A00044FC1C5BE613F1BEE82D977D76E4C72799
-:10E7B000C3F8EF6C41BFEE85D0DF3B6307F5C5388A
-:10E7C000CE3321C0CF286F1E5F7012C0E1570C0CF2
-:10E7D000F523D84ACAF32FFF2144398F7A85EEC337
-:10E7E00085A34E07BDB4BB8C7F3FC57B3958EB0F6B
-:10E7F0003DFED3D5F0C288AF3AADBF6D76028EB77D
-:10E800000DEFA01AA14C6165EC31C44739979FFA0E
-:10E810003203C9D3259027C40FCC9AE8C25AF4F228
-:10E82000FE04CA87960EE509CB709ECFAC32D26E3D
-:10E83000D928F1D57D37C22B6B0E8AB4CD2ED97C69
-:10E84000C11DF977EAB8D738F8FC22ECCC80762ED7
-:10E8500002F0E9A6FD6C7BADF6F7ACFEA0C8E7EFD1
-:10E8600015F97C5AE1075C6F233C4A5C3B3A05C7CB
-:10E8700091C3F535D053C0FB58976630FA1DD1DFF0
-:10E88000172574E928CFF72A651CCF29F35A8BFD89
-:10E89000923C73B91F25160FC77ED63819E9F1359A
-:10E8A0008EAF6B316E77A988F7DBE711AF80F8ED9B
-:10E8B00055ED13B0FFDEF33C54BA9571F62C6BA105
-:10E8C0007AB53FC9EEE6FC5EFE356B86F9E2215B68
-:10E8D00091ECC519CA8FBAC668646887519F217CBC
-:10E8E000C96AC43312ACE7AC630CEF33D78718693D
-:10E8F0009F624DE5298257DA381C2657A7E3F98B2A
-:10E900009DCA7CC264996077C07C52A4A9E1DADF19
-:10E91000730D2CB72B78DEA6E063A7C965B800E3BA
-:10E9200018FC37917EBFA3B3F7543B9BF3A521405E
-:10E93000FF74D1C93FFEC69E62171EBA11D7CFB26F
-:10E9400093EC82BA6EDB3686DBD795C1533EC47535
-:10E950007F91C2474F078F7B0FEB0F8CE6BF83D3AE
-:10E9600034FAD6DE5A3DB94319F77605EFB9B2E36A
-:10E97000AB79D0BED069C191811973F4FE15F4E76B
-:10E980001C23DA3D40B783D9AA3C388351EEDE1907
-:10E99000339D1DC2FE0BF8BED3B68289F45C62CEF5
-:10E9A000DBFBC37B9FB418C99F81E73F2B8FFB150F
-:10E9B000FCFF4519C7070AFE9B153EDD8B76241523
-:10E9C000E32C6954BEA3D8118F6247762976A451EF
-:10E9D000B1233BD18EA4E2BC2651B94DB12359A33A
-:10E9E0009F243FE912E6C515D08E54B22530CE7C67
-:10E9F00018BFD8817D1B9F2306FC4E56B08E4EB7A4
-:10EA0000A745EAE0D1526CC0EF742506FC8E573F53
-:10EA10005D7D9E3533E077C086EADADFE21F11F0D4
-:10EA20003B627A3B32E4D804BD3FF3E53DBAFA419C
-:10EA3000074B74F532FE03E69B7D8CF1FCB2C1C33B
-:10EA40007E87FC927DDCA8FE3E33EDA3A9FE56A096
-:10EA5000FF93CD5AF7F10CB48F273309CF75D256F7
-:10EA60006582AE9EFCA78326672C9E3FAC2D04BE1C
-:10EA7000C37388074BC730DA8707FE0579CA769ECD
-:10EA8000F892F28D8AC599E4275D34EAF6D37203D1
-:10EA9000F6C59C23F5FB66D957D937FBFB8DCABE5B
-:10EAA000433B7F2CE29AFC31902711C7FD74F09410
-:10EAB0003D88B79D9F713BD5F4D983B1F8FC5D6C5F
-:10EAC0000AFD6CFFE641F2BBB6B7CA872B58EB6F65
-:10EAD0006DF3727BF1E6C1841DB8CEC88A16480F6B
-:10EAE000661D993B99F8F1A0817E9F33A5A02A1855
-:10EAF000F1B2EDD0C260FDFD298D7E204269F48324
-:10EB000088AC1CA1AF8FD2F06102278EB6FDFF0545
-:10EB10006B92E82C00800000000000001F8B0800B2
-:10EB200000000000000BED7D0B7814D5BDF8999D19
-:10EB30007D25BB81CD03DD401226E161541E9BF78C
-:10EB40002624611202460DB0101E414298243C5208
-:10EB5000AB3655ABD18FDE4C08841051A2B515AC45
-:10EB60008F958AEDEDE316AD045494E5E903840531
-:10EB70008346455D10D1DBD2BF28D0DA7EF4F37F27
-:10EB80007EBF7326D9193601FAB8ADBD37F9747254
-:10EB900066CE9C39E7F77E9D0321D790809DE0CF1C
-:10EBA000D722FC3FD3D02E2081F4F076A9A17D831B
-:10EBB000A1FF4C43FB2643FF3ADDF3ADA19983153A
-:10EBC00027FD1B7E265E78DDDC4C48E0AABE7E3940
-:10EBD000669FE8197361BFDC6E53DFB8F4BF1D1F79
-:10EBE0002C319D4B20A4AB5BF4DB52E9F5E812A27B
-:10EBF00066D371BA4D7E22E0D544E8F3AD3DAC6DED
-:10EC000023AA631C7DBEB9DBECE99008D9CEBF3BDB
-:10EC1000DAB770B02F869089E6D311BF2B9F37F5F6
-:10EC2000AD8FC07833079308FDB4EB4E3E6EA0D98C
-:10EC30008ED76DCD2E12B0F53D176372BA7D741E5E
-:10EC40005D219387DEA6F32F8D2774DDBB9C8B1D82
-:10EC5000302E9D2F214329163C49552D230991E83B
-:10EC6000BC4D741D9B4326D241D7997D847D3FDBEB
-:10EC700022C7BB22C09510931EFE178C477F004E03
-:10EC80004ED1DF41E1B2F38339F1E3E8F82F748B21
-:10EC900004E663551A1CBEB1B4DDC3E6A58D3BC9BD
-:10ECA0002EEAE050421C3A7C149D8ED3B5B38FD12E
-:10ECB00079D2F7ADD2F47880EFC5E64948B4818EB9
-:10ECC000E20CEDA1BAFEA3258AB7B1FDE3E1058E02
-:10ECD00087CD8007BAB017A23C55BE08F0DAFCA178
-:10ECE000B5C11F76FF3F3C142843E06AC26BF63182
-:10ECF000932740E173AEDBE401E0E5BB3AC5C6080B
-:10ED0000E3149CD0D3676E77B40E5E44AC1E900FB4
-:10ED10009A8EB6ACDA1DD6FF1E4F4CC24907FD23B2
-:10ED20008FE4E1FA2FF2FE1F9BD555BB2D948E295F
-:10ED3000C96EA2FD88AB9290C4FEFB13B29C325BFD
-:10ED40001F1C892B9E2EEE52F0D489EF5D80AF7E82
-:10ED5000DEEF1B4765F0A4E0857EABC6F97EE88157
-:10ED600071423344F8FE838EDBC4109DF7238EDBA3
-:10ED700076017DEEFF935502BEDEF1A7AE24B8BF4B
-:10ED80002F634B12D0FD3EFA4E10D667A658A36DE6
-:10ED9000ABBAC001F4F546F761E41F89046F1C9F0C
-:10EDA0000D6D93A783767B39BD723019006EAF71FC
-:10EDB0003AD9CBF97537E7D79DCD6ECEC7125E5FD6
-:10EDC000694EC7FBDB9A3DD87EB1D98BEDADCD3214
-:10EDD000B6BB9ACBF17AA8D987F70F365761FBCD2E
-:10EDE0006685D161FA1D65208FCE255100D0752D25
-:10EDF000774C3347C2E7F5929ECFAE73EBF96C3296
-:10EE00008573787B927D98812F47E89E4FFCEA1AA4
-:10EE1000DDF3A2D399BAF684CF0A74FDF343A5BA01
-:10EE2000765ECF0DBAFE33CB2A75CF7D85F3F5F331
-:10EE3000139D285FB6BB0494CBD3B2EB75CFB7C399
-:10EE40001F2087ED825F4D05B8540E284F03801FA9
-:10EE50001BC091F1F1AB1C3F7B003F36C00B83FF21
-:10EE6000CB007FDA7E09E04DAF3967955D83259051
-:10EE7000030DD8B6A60F767A28FC5F768A28FFB7EE
-:10EE80003437E27BFBCED59D1571BE0E09F0B29DE5
-:10EE9000CF679F45392B26405B90960B17CE2BA74B
-:10EEA00047CFEFA3CB17A2DCDCDE7DDC01F4F6CA92
-:10EEB0005797A6F7B47EAF92CA49401FC5DD545795
-:10EEC000A55E5CFF697AEB62E36BFD40AF46D2174B
-:10EED000C6716FF84A11095DC7CB3DEA0F62A01DEC
-:10EEE000F89628D1766E8F3209F0B63B5D708902B4
-:10EEF000F69B24C3BCCF1FBE11EEBF12329B60DE57
-:10EF0000FBCFC71158C776AA776DB4DF1B64C49ACC
-:10EF1000F114DE819E2FF7015FAA4E8B6714B97042
-:10EF20001E291922CA87CD636C26613CE83B330950
-:10EF30008C013E57109E5D5FA539E1BA395DE4F75B
-:10EF400083C8EF5767B8F0BD97CF672640DB448290
-:10EF5000280F02674DE5FE08EBBD1ABE436548CE9B
-:10EF6000F98F1C2EDA7FEFD93A07C897577AD8F86D
-:10EF700039CB420E80D3BEAF3638E1FEF6F42C1CFE
-:10EF800077C7D8A5685F6C3F6B42BADE3E669533A3
-:10EF9000331BD7E901D86D3F5BB72603E8BAC78CAE
-:10EFA0006D89282408F496CEF4ECE6B375E4307D40
-:10EFB0007ECE23FA81CE7248E7DE4170FF8A555635
-:10EFC00092C6E06FBE82905BD9CB64924B2F074A0A
-:10EFD0007BF4FAC41AAA9E3503EC08A067DA9E6A8D
-:10EFE0008ED73DDFF7EEF2849980170A6FB8F7CA23
-:10EFF000D9DBF78D05F9E367EDDF1F7DDA3A985E1F
-:10F000005BC6AE1A761BF4DBECF0D82478A2902F06
-:10F01000693BEFACD90FF6468E533F8F7D57572291
-:10F02000DC379F65F6D5B974B69EED9E7AF2007D09
-:10F03000EF656E7F4D3A36B202BEB79FDA4F60572A
-:10F04000BCE4F94D7C16C833AFA8A3370A1FA497B8
-:10F0500073DD04C7A13F83A6523814B22E940F7DEE
-:10F06000ADDFA1CFF7E5DB5CCB29AAB79FDFB9EB1A
-:10F0700076DACE4B14894857F22DBF7E7EF93F7366
-:10F08000E8DAB77EA6B74B6C44E0FADC8972A03FA1
-:10F09000FE9970DAAA7B6FAAD9A61B378F843D47E9
-:10F0A0007C5AFB9EA75EDC3ED9C2E59A669F6CB196
-:10F0B00028F37D40D7C15917D1A3CBB9FE6D447950
-:10F0C000B195104F470695EB578B32F0E1B9A37617
-:10F0D0008463DE23332610D4D7CA04E00724C63065
-:10F0E0007BC07BF422F68A4B2509B9FC5304AEE6BB
-:10F0F0009321DABF9DAAF9AF4187737D6E1CB73F9C
-:10F10000BDFFA06310CAFDC232A6171E711C403D90
-:10F11000DFF501D5F302FB4688E27D36FC017AFF7C
-:10F12000032BF67FE97A01E58866375412D94255F8
-:10F130001C99E63D6BBE9FE2CF67AF197B2BBDBE2E
-:10F14000F46ED730E0DF97C03E40F9D0E860F6417A
-:10F150008C1A4FA7B8ADC7867CB8E5B489D8C16F03
-:10F16000D866433AA57C7ADF58FA9D6D41662F74C4
-:10F170009DE6F6DE3607F2C98EDFB379742D733063
-:10F180003FE39455067B7CCBB21884F36829266054
-:10F1900086F19AD8F83D1CAF6F73BCEEE3FAEA75BE
-:10F1A000AEAF5E057B02F517B32776813D41AF3BDD
-:10F1B000B83DB11DF419BD3E7FFAB9F7812FCF6D6F
-:10F1C0008B42BB733449DF04F3DAE6B4E23C8D7062
-:10F1D0009EA7E8F9606E95DE6EA818A3B71B6E189F
-:10F1E000394CD72E4F1AA17B7F4AC2B5BAE765CEFC
-:10F1F0002CBD3C324FD0B5E5F37ABB61BAF7463D42
-:10F200003DC9617603CA3BBDDF383BDC6F4C053C32
-:10F21000313F674BCFED88C72D47D3062B6176C2B0
-:10F22000560EE72D4799FEDC1AFA32468960477C74
-:10F23000C6FBFD96E3E314C7C77FA7C82732860045
-:10F24000BF7CC9E46F3F74ACBDAFBDF799FFE3412C
-:10F25000E17A7DB828219368EDDF77BD3F1A9E5F84
-:10F260002A5F503A6D0F513CDF2DC67476D0575649
-:10F27000991B9F84B6AA9AC9C66C0447BA199F5FA6
-:10F28000E30179DC1AD3F85378BEB9C5E6DA900009
-:10F290007CF41FBF86761365051BBDFE312AC54F62
-:10F2A00028AB59334D38AF672CBE611ED09B826F9F
-:10F2B000FEADB4BFBADEEAD9285D381F67A6A0311B
-:10F2C000FB56D04322E7FB3F0B8A3393DE977F291F
-:10F2D000A09C8E9208EA051BF105807F48833C1FA5
-:10F2E000F8839828FFD0EBBD594A1CF42732915C73
-:10F2F000741C646DFA3D21B8F74F029D978534AABE
-:10F30000308EAD814A18CACF0F662889D8DF3C13EA
-:10F31000C77F7E2A2120CFE872B09D7D177175C40A
-:10F32000D2F911C5F4256DCFA7FE3E7CDFE4B80508
-:10F33000F5D4FBFF6DF28B11ECA55E38DF62391559
-:10F34000D2E82CED42FAE9E274B135D587F2D7F86C
-:10F350007E6626F307B77C344D04FACAB60F92C115
-:10F36000AEA00B146750F9BEF5F80D8EDA08EF4D1C
-:10F37000CEAECDCC1CD2D7CE0E6E126B9DE8CF8B0D
-:10F38000B0AECDF46F58D78BDDA600E0F79CD38AE2
-:10F39000F2A4BF75E487F471883CB007C2F88D9081
-:10F3A0006AD7C96B01DE9DC2D7D786D3977C5F38F9
-:10F3B0007D3D7F217D219CEF7E2B1DE1DA2A30FAF5
-:10F3C00052297DC173B5B411E94B35115F6B36D24B
-:10F3D0001BBEDF64B6BB6C54422ECD4C43BAE98AE7
-:10F3E000A9783F20E1F746CC447FAE86FB733528F1
-:10F3F000E75F3FC2E4BC715D3B8ECC1916027B62B5
-:10F40000D4DC61C0E75DA00086C2F473E7817DD9DA
-:10F41000DBA6E8423B70328190157D9E3D4F86FE13
-:10F42000D76BED1CD6BF84F55F92F9F07A159E2F4D
-:10F43000E0CF4925EBAFB5D5BC7925D0DF62C2F668
-:10F4400007BCFF431E7929D0E383197203E02F0321
-:10F450008C167AFD64BC7C33DC5F9A4970BD778D75
-:10F46000976F096FFF669C7C5B787B73AF9FDAC9EF
-:10F47000FDD45BD12E7DBD6726DAB312F1DD087AAB
-:10F48000E7F5208B476D1E39B01F7480DBF3FBB9A5
-:10F490009FFA06C8A3AB409F303F750FF7537771B3
-:10F4A000BDB283FBA9DBB95E7999FB492F713FE9B6
-:10F4B00005F053AF023BA48AC749989F9A3D6A5210
-:10F4C00019DA112ECD4F4D89E8A74EF7EAF5CD5444
-:10F4D0008F5EDFDC981E6FD02F7A7D332541AF6FB2
-:10F4E000CA9CD71AF44B96AEBF7C5EEFA7169F2D31
-:10F4F000D5F52F3CA5F7530B4ECCD4F55F9A2921B7
-:10F500001EBD476FD2F5CBEDAED3F5EBC39B0FF12C
-:10F5100064551F77821DB779643DC71BB31734BC90
-:10F52000755D046FAF72BCEDE178DBC5F1B683E3C6
-:10F530006D3BB7075EE6787B89DB032F70BC6DE11E
-:10F5400078DBCCE30B0738DEF673BCBDC1FDDDEC28
-:10F5500051BBD03F3B779A70BC3D2146C25B79924C
-:10F5600068C083C380073DDE4ACDC30C784833E0D2
-:10F57000E11A5DBBF054A6010F05BAB6F768A90100
-:10F58000FE3718EC864ADD730D6F533DF30DF455CD
-:10F59000AFEB77C9FCE66476DE5FCB6F7BB91DB756
-:10F5A0009BE36D27E00DE3441E1E8FF0F2B82FB3EE
-:10F5B000E35EE478DBCAE3425D8037B0EF38DE5AC1
-:10F5C000479E413BFEDC790D6F0722E2ED72F9EDBB
-:10F5D0003AB73E2E34D9A58F0B4DB2EBF9AD84E886
-:10F5E000EDBB895FE9F9ADE8B4DEBE9BF0999EDF23
-:10F5F000F24333756D6A0724640D013D7593EEBDCA
-:10F600009C609DAE1FF59398DFE2E17ADF5F89FA97
-:10F61000A86D2AD38F940FD1FE7EE67BD40EC8E866
-:10F6200083C7F306FFE9F97EF4F7E82C66D774BDCB
-:10F630005F8370CD01FD1DA15F06EF9791E5C2AB21
-:10F64000CD4CD4E84C9CE6EEA1743EE691CCEE3174
-:10F65000C7AC812003FC044DB97D7692E8F4111803
-:10F660009FDA4B195961F6A0D9D548C06E106D0FBD
-:10F6700055C3BA8868F2A0DE35D847A4C125DF0E8D
-:10F68000F76F1FE4E9A0B05892158BF370934D16F5
-:10F69000B033EECD920B605C711283C7E664EABBB7
-:10F6A00053786C8E626D95C26B236D8B83AB117E2C
-:10F6B0005D145E62068C9F40EEA2F3AACCB2323893
-:10F6C000CC235C9F6ED4EB43301868FB9968D69EC0
-:10F6D0009DF5CC3C35A94FFFD6FCA66BBD4AC7199A
-:10F6E000ED1C5A4FC6D171D7A97160678EA1F30383
-:10F6F000F968726C4B8E647FF76787A9E3E4594021
-:10F700001F7771FD3A9A42C49CD9FFFBCF44FBBEE0
-:10F710000DF8CD067884C5BDA66631FBAC12C6C90E
-:10F7200041FB520EB72F49B012DB6D198CBE7EB271
-:10F730006626D29B93C24B8C85F933F8CDBF93D10B
-:10F74000D7E5AE439BFF0074E20BB7A7C3E8E4AE76
-:10F750004874422A3C6EF4D7FBB3E75436DF566E4A
-:10F760003F6A76B22D49B39BFD1C0E24501087577B
-:10F770003299C235CE45305E53E332F9FD146451FF
-:10F78000B19902CA9D3281B852617499303C564891
-:10F79000E1F2C7181FF41E8D36C8F738831E1EAA63
-:10F7A0006B179F4D33F889D70CA8E7CB9C130CFA45
-:10F7B0006992AE7F79D28D063FB6D2E0E7EAF58452
-:10F7C0009998558E2F13C62D544132E7C27D82F889
-:10F7D000097B8E7E672F9C1F93AB905FB95F63E4BC
-:10F7E000D77BB32484B3E0627E8DC60FDAFB1AFCAC
-:10F7F000AC6E86D7B5B99A7EF2A0DEB105BE4520C3
-:10F80000AE4A6D68795318BD6D68B6BF5F368A9091
-:10F81000A79BC9FB651479FE66175E9F6876E3F5C2
-:10F82000B16609AF8F36A763BF75CD1E6CFFA8D92F
-:10F830008BD7879B65BCFF507339B63B9B7DD85EE9
-:10F84000D35C85D78E6605EF8F342BAA9DAE6B6493
-:10F850003BF1A87429A33AE9F7C2E036A29DCE2372
-:10F860000CEEA9AA4BD71EDEE4D6F54F6E9474CFEA
-:10F870008735A4EB9E272A1E5DFBCA2AAFAEFF1078
-:10F880009FAC6BC79797EBFAC7CA3E5D3BC653A5C3
-:10F89000EBEF485774CF7716170C0E0DC0C70F3516
-:10F8A00007820C2EC12083D36B41069F1EBC9E0293
-:10F8B000F94BF118670EA2BC88CB7651D2A1F8B2F1
-:10F8C000B3FC5ABCD923C4868D1F5F4EC74B0F9F14
-:10F8D0002F1D4FE79FF9915E623C41DD7D477A8F96
-:10F8E000EEBDC9A2B314F211870A458C7B1D2A8C88
-:10F8F0008F01FBE53E8B6B6A36A5C7834744CF0675
-:10F90000780F5E88202F8F71BDE8186747B9307D6A
-:10F9100085B04144A265EFD7758F8818F73CF87D14
-:10F920005205EB72EC7C4102BA985E581B1F15E63B
-:10F93000AF4D0FFCA9CC0DF75764E446D1D1A6B763
-:10F94000A75AEBC7F4AD4BEB57B7426F5FF6D1BD8B
-:10F95000DF0EEB18AD7EDF0EF2AD236903B63BD2AE
-:10F9600007CE93FC96DB619F713BEC248FC39CE038
-:10F9700076D871EEF784B81DF621B7C38E72FBF905
-:10F980003D6E87F570BFE76D6E3F7773FBF930B75B
-:10F99000C33AD29F9B82F2F097021123F8A9DAF5BD
-:10F9A000DB3FD3DB61DFF2EBEDB0A5EBF476D8E221
-:10F9B0004EBD1D56DFAEB7C36A55BD1DB6B0496F0B
-:10F9C000872D68D4CBC3F90D9374ED798A3ECE367A
-:10F9D000B74A6F3F6BF899EDD3CBC5CA72BDFDDC5A
-:10F9E000DF7A5F0A5C8FF91F40E2C7617AAF379F09
-:10F9F0000B7A85D245F679AA57300EEE6B85FCC995
-:10FA000056E842F56F9129F816E47DC8DB2281B8EB
-:10FA1000D3CE73B915D323D05FAEAAA79BEAA3FABE
-:10FA2000F8C64D77EAE13AE316BD5F622DD7C355BC
-:10FA30004ED2FB2595463DE3D3C355250A01BA3482
-:10FA4000EA1B93E31609E4F7E5EA1D2BA17A85B5D5
-:10FA5000757AC70A77D274CF51EFB467B3785D2E49
-:10FA60009D07180B2D5179FB3D146E3BDF35639DCF
-:10FA7000089DE0E19154FF14C3DF147E2F5B14B5A1
-:10FA800011F26C3C2F42C453BBBE43FB5B87B1BC3D
-:10FA900008F9CA7C02C657E82FE02B97D076989ECB
-:10FAA000CB09B2E761F3D53DFF31E06CC0F9C887FF
-:10FAB00047E6FE4FCE272601EC21329E8CC77A8383
-:10FAC00050DC25C5578DF7B303CC0ECA4E62769035
-:10FAD0003779A6C8F34F04421E5E13B1633C3385E9
-:10FAE000F837429C337ABF631A6DB6C29089E0271B
-:10FAF000E9F97F56C5C0F979A31F76BD34C2E0B7D6
-:10FB00005D6BF0EBF4FC6F2306FB254424B027115A
-:10FB10000726DD7384D3614E472DC7DAE6C3BA5E8C
-:10FB200048E6F9154E3F1338BE08D9B4AB963EF7F8
-:10FB3000BA4502FE868DA8F1E3A1BE28D82843DE8F
-:10FB400021CF6B7321DEC4651EB44B4F31FC78E9C5
-:10FB50002FE0CF4BC2F005F83BAAC79FCDF0FC24A5
-:10FB6000A7A70BE7C5E8E89F372F035D39E32EA968
-:10FB70008EC578BF24288B31747E7B5C02E651F7FA
-:10FB8000041B8325B47DC6CDEA865625CD34E37C9F
-:10FB9000893C6832C5C314BE5E2FCF6B753513B474
-:10FBA0003B9E6FB6E395904611E4519BFBF678D0EF
-:10FBB0008F5D29CA30A84FEB1A12BB02F2F39B2DBE
-:10FBC000B14991EA5A7658F2509F76ED48344BF499
-:10FBD000FD12B3CB0CEF9524D589E0EF5DD743D070
-:10FBE0002E28492298CF7ABE3970887D4FC13A1CA1
-:10FBF000BA8E49609F96B96A27C524407C96DA364A
-:10FC000012D8B9B1E8BFEE1E6243BCD95C4BCBBE83
-:10FC10004BD7772051248297E2C7433C01D0034958
-:10FC20004E8F1F86735B8E039C1BE8EFD7697D7A2E
-:10FC300081F2F9F1707CE491B036E615F4EDA1396A
-:10FC4000BC0E8AE347220AD659B4F5B0FA32128ABA
-:10FC50009C67F988DB0D5A7CFF28B71BDEE371B780
-:10FC600043DC6E6833C46FDEE276C36E6E37ECE55C
-:10FC700076C36BDC6E7883DB0DFBB9DDD0EB2F1028
-:10FC8000B505F28AF3883D04FEC2815A0667F70A79
-:10FC9000C15F0EF970A5D3574AEFDB5658507E0E60
-:10FCA0004F525B203E6EAB5227C33ADCD59D2D7080
-:10FCB0006D29EE4884FBF3949347C1CF067A999A55
-:10FCC000CBF99DE261AD95C179DDE218CF72A067F5
-:10FCD000654905F64B6270B3D35F8077E222550029
-:10FCE0003A702B161DBC6B0DF09D07ED30F9110D10
-:10FCF000F448E179BD06F72C92C5E0AE4601DCA3DD
-:10FD00006A39DCD31322F2C93A0E770D2E3B8A6F83
-:10FD100036A9B4EB5B49AC6EE2ADC29B4D07E8FC83
-:10FD2000BB6511F3AFDD49BC4E907FD738DE3BDCBD
-:10FD30009E5D5B3A70BCEE20EFD7DB6E27926D7054
-:10FD4000D838A5F75924FA7E55607532F0C5DA41E6
-:10FD50005A9ED883F6F564B1F0CD543ACF20AF83E4
-:10FD6000D4E4E51CC26163F8DE5B7C9DFDCDE7ADAC
-:10FD7000D21B2D121D7756E01E02DFB3991BDDE169
-:10FD8000F5A5DD7C7EAB66DC41802F8329A71BD0E7
-:10FD90008FF7D924B0BB87277956021DB89314CBAF
-:10FDA000F7E8FD69541E4A2E9856E78E04E847DFAF
-:10FDB000799400BD5CB309E8E1AD643BCA9DFEE601
-:10FDC00073811EF113B447FAD32354FEA03D64ABF4
-:10FDD000F8F428F8B595A4D113A0EF05B33D4380FE
-:10FDE0008F499505F5733AFD0DCFAB69D74A83FE70
-:10FDF00076782D03CAE1E1E79BDBC1EF780BF807CA
-:10FE0000F3A02406EA73821577D8013ED393D37604
-:10FE1000027E48893D348AC26155E1CA0500AF556A
-:10FE2000154B5D02D055D1087C1E2CB19F848A9C55
-:10FE30009E9255C95218BC57AD26C50AC03BF92E33
-:10FE4000F712BAAEB4A43F342B946F7A2CCCEF796E
-:10FE5000A7F47749A961FDC7E694FC2C07F8DACD31
-:10FE6000E87CB455498B541FACD1794B7134C665CD
-:10FE70008ED7B27A057A7F65137D55A1FAAAC3D3CE
-:10FE8000C7C78B393D458D3ADB00FD95D53609FD59
-:10FE900033B1BAAD89B6ABC05E02FBE9610BF2A526
-:10FEA000C6CFC98D7AB9A918F8B6CAC0D71A3FED1E
-:10FEB000BC908F6300AF51B58C9FB4F519D735EF67
-:10FEC0002B6AE7C41362F4EFDE5D34229AE9B130A5
-:10FED000FB763CCA26C94AD7378BD3D32C4E4F94D6
-:10FEE0002477C07C0EDE33622AE04B6DA17E00CC0D
-:10FEF0006D99A5CFFE4D837592415EBAFE594D6254
-:10FF000006F8A7E44E4B1F3DA6E9BE87F50273C273
-:10FF1000DB40AFAAFC0ED81110CE848FFEF1D8A121
-:10FF20003DADF47BDD43E3498B07C73BC1E4A384CC
-:10FF3000E31D2C140779E1F9BDA33220854FC2E9F6
-:10FF4000958E1F52D9F39A7B4664A2B9C9DB1F2D47
-:10FF50001B021564C45761E9EB0FFF2B3323FE67C7
-:10FF60002F133640FC6FB4F8C5E95DB4FFAC4A9B73
-:10FF7000A7958E3FFBC13A0BD8FD95AAB2A79EF676
-:10FF8000ABA474E177E13A747C72D84C2C30CE612A
-:10FF900059209DB43D6B969E6F6A96E9DB467BE4E3
-:10FFA000488C9262A2EF7F2AD8C8067ADDB17EE93A
-:10FFB0001330DE270FDAB0AE90C0B772410F101EBB
-:10FFC0009F949FB8873EAF5B6723901799C7EDFD5D
-:10FFD00041B9A938AEC9518DEFD776C4A05F7C7204
-:10FFE000FD95E300FFED718DB7413DF527B14A0D59
-:10FFF000E0B56ED5B526888FB447774E86FE9F9ABA
-:020000022000DC
-:10000000886B43066D4B0F59603E3DD43E8078AB04
-:1000100036CFDAF630FCC37773591C779A89289B60
-:1000200022D8350FE6F6D627A8B6B0F93F9C2BE1CB
-:10003000FD6969716D3F80EF50ECBB3C1C2EB0EE4A
-:10004000C92C2EDA9EE4A91942DB2704E25A9E004D
-:1000500057F943E04FF57E1BD988E827D8DF3A6C83
-:10006000E8531D61FEFF383EAF8F63D9F3E3EE68BE
-:100070003FACF3B8C4DAAADBE9477A362BE97362FE
-:10008000D87A842B6017049BDF9118C99A86F820D0
-:10009000D273745E750F3F82F8DD4CE103FCD9E347
-:1000A00092DA76D0799CA4CA5A85E7EE4727033CBA
-:1000B000EFC8A4849A78219CEECD8DC3F99C5CD7BF
-:1000C0001A8375262EA258AFE883476DE796BB8545
-:1000D00071A8E755263F18FF09244CBE53FC4ECBB0
-:1000E000FFA1A50ED61B453A012FA6DD2BEC30CF84
-:1000F00079B516CC8F3989AF1CE469EDC302B6E936
-:10010000CF1AD017759CBFDAA5B8BD40C7C7C11EAE
-:10011000477FEFB13D501F50CBE557D5223D9D2E77
-:10012000769B75FC32A349CF3F749DBAF6FA5C56B4
-:10013000D7D9E3FD2401F4733B5D36C0E5D336C166
-:10014000BF01E5AB2F25BCBE2E35D7A4C5E1254B9D
-:1001500018FCEB28FDD581DEB093CED24458F7A829
-:100160002940EFD623D1384F237CFFD5E1F071B27F
-:10017000543384CEE7634AC750FF737C7D2BDA2F5C
-:10018000F023EAF8DAD506F4BD84CEF25117D2A7EF
-:1001900075C6D83E7AD1E053BB2E752FF4737F1EFF
-:1001A0002351E789D4BA0B96823DD94B4706F8C054
-:1001B0009ACDDA7746F4D1193E8F406793685F6E27
-:1001C0001F23BFD496F5E6F55206AA5F467C1700BA
-:1001D0005EC7CF873C9426E7D616BF817470C645AC
-:1001E000FC22F36BDF06B91FC3E7A61239509F004C
-:1001F000CA84EA5D17DE437F399EAF37B64978AFD0
-:100200002C8B90B826F1BD327A33B62C18003D61A4
-:100210007373BDBB2DEFD7A3AF80DD0D04E3348333
-:10022000A22B3C015C8D2B11F729585C8960FF3CA7
-:1002300028085510B71F44F47655BC011E24DB7CFA
-:1002400022DC2E8FE6F27EE9E41102FA3BE57AFF2A
-:10025000D46CB08B7EDE4BD76CFD12FC49E1D846E6
-:10026000FD3790537181CE4EA0CF1A6AB7FA71FD57
-:100270001ECCEB58CB04F2A8D017BFFA67C52F2EBF
-:100280008883F1F8457F71302D1E50C96E517F472C
-:100290007143DEAFD24DFD9C416067DDEC46BFC9C6
-:1002A0007D12ED522BB74BA3462D72B1FC19E31F03
-:1002B0002D1E60A42B635CC9C87F46BBF4B7B9DCB4
-:1002C0007EBA865C7339F1012D8EBF2A9DF93DAB54
-:1002D000D2EB9643FDDA39EEF7B85413E271CE2C27
-:1002E00001F1A8D96B73BCA76701FF69F50717F384
-:1002F0007B3A0C7E48B4F729598EA03FAD792C2E5D
-:10030000E42864CFE7D889D91E963FB0E5313D3760
-:1003100087EA413B5DE234BE8F683AD1E7A7E2F855
-:1003200038DA95FE04337375F5827179EC3EE64355
-:100330006D3C1F6AE7F582251967777D0DF76556D5
-:10034000076C936B1FFF1E8543F4AC188F09E957A8
-:10035000D9F843F093673950DE26A44B58F75A95E5
-:1003600064F720EDABF2DBE097A19D29C194659481
-:10037000B77329FF065C03F83BF681E3664ECDDFD9
-:10038000296474D51B5FF231F96DA2BF404FB3AB46
-:10039000F4F4325719987E32F3787C89EFE31A1D12
-:1003A0003ABFE36BA40BC6BF6B53583EFA5C05ED36
-:1003B00003F9DB7EEC71CDBF755AA85F44F112944E
-:1003C0007721BD07D389251CDFBE425157DF10CCF2
-:1003D00027D12EEAF7042D24F941DA6F903CF70675
-:1003E00017F8BE25B6985AD41B7E9D7D7F908E7BD4
-:1003F000CCD9FF3C8C74BE7AD4128CFF3F703D0583
-:10040000199DFF6A483863FDDE73F3C16F7B00DA24
-:10041000585FF08BF9506FF74094D6EEFAB11C5646
-:100420006F70E796977FAC1652BFC64EF52D1DCF65
-:100430002111CC5311B209E5B308F14090CF63C24A
-:10044000E08B7E831EDE463B5E2C647114D1C0F7C8
-:10045000C6EFDE9CA7DF6FD7DFBA8DEFD19FAA6B07
-:10046000F4F47F7BDE00F5B2C6F79D503F1173F9BF
-:1004700075075490627E5A24260FF8CBA494E0F7B7
-:100480000417A32B9030A0072D8D833C0837DA8EFC
-:1004900002BDE0776871559C7414E05F847C620053
-:1004A000F5399D4A481801FDB5FA03857CEDB8740D
-:1004B000B947E5318E2395B3FCF2BB3209C1F7464B
-:1004C0003FBACE970BFEFA11AA6725D0E337AB10DF
-:1004D0002F3BBB8C607EC0E152B04D3F156A754129
-:1004E000DC8AB56B288C402FDBDCFAFAD71DC58F70
-:1004F0009658E9F3B632166F3DD81C787705A5B546
-:10050000B6C20294972BA063D87C833BA3AC108720
-:1005100051D4EFDAC16EFE689968856B7079AD0AC7
-:100520008B7E3751DD244810775008F8F9D665AD39
-:100530009381AFDEB5A89E3827E655314FDCBE5C0F
-:10054000BD15FC1E59AA284FA57CB4A1DD8CFB8CDF
-:100550008E95FE2E490AE3C3535C9E1ED811F5000A
-:10056000C06195600F45C1D5A26C589D00DFB37A7C
-:100570005AE814DF6DF941327C67D5E2559E9DF053
-:10058000BCC5063B50C9AAF5F62A187755F212F7F2
-:1005900092B071EDC3AC8D703F38B40DEB5A9472CC
-:1005A0008F352A16D6F5450CE467DB9765C5032D14
-:1005B000B6255A53EAA1DF923FBE990778974C9827
-:1005C000B7B5BA3B2DB0EEE16E4585FCF85F72948D
-:1005D00057F3E83CE7351D9B8C757365B12BE13A09
-:1005E000FCFC77DA01FEEFF2784C28B10EF3B56D22
-:1005F0008BEAED30DFE98969CBC3E3316D858BEDA3
-:10060000A3E97B696E53EDD24117D2471BC45FC685
-:10061000C3BCE87AC642BF3F342BB45F28D95A1511
-:10062000699FD6F13CE6EFD95B97A6415CA46DBD0E
-:100630001DD233A44D50D6417E404D7546AC631F4C
-:10064000EB65EFD528AEC95609F183FC762AAFE7F2
-:10065000C7EA48B02B19FEEC6662B784E9BFB1392E
-:10066000259FE685F9D1177C37B10DF5419BC0F880
-:1006700077ECD6CF7F0CF5C2BFCAF17D0EEFAD6A25
-:1006800057D601BC886A27838AFBE793D06A9242D7
-:10069000A83C6E6BB15545AA430B2D12A7019F5084
-:1006A0000E3A3628254C2E2FAF4F83F848A8E52A5E
-:1006B000E4EEDEFEEBED1F021E42EBD363411F862C
-:1006C00092EBD2D2806E395D1AC7DF94C7ECC95F56
-:1006D00067F92C5EB02BC7B0BC67459ECFE645BD21
-:1006E000DDE9063BF71B40B72930DF7F22DDA29E04
-:1006F0003B9E770AE98AB82E2D1FE9232133E65362
-:100700008BFF8CF1DE8EB1DAFE27161FD4ECDEA84B
-:1007100051275680DFEACBD7F25D857BC05F9FA66D
-:10072000E5532B587CD0457F23C5077D86F8E03400
-:10073000435BB337A778B97DC2EDDB24A9D3570A51
-:100740007277BFE8017F229930BD32A342F0839DCA
-:10075000DD521C6DC779E7F33827F7BFE6F179BFA3
-:10076000D76C27904F32390A57C2FCA715B0F93B16
-:100770001A32720212C87716E7260D3609E3268070
-:10078000FC44D2EBA7F96010BA9E790D4BD1DEEF95
-:10079000835F0B8BF310BD3FE12306FF6111B3C7ED
-:1007A000347F6BBEC13E30DAFBC638755F5E609346
-:1007B0001DE8E9EC98CC8369123E56035A3E80F658
-:1007C0005BE8ED5E190A933FDD5C3F1C6E96DF5BD4
-:1007D00041D7BFD2F7133BD06987D96F077DD2517C
-:1007E0007E470CD05F47B5580E7C1F6C2EC77E0726
-:1007F0009A7D786DF6327DB12F47BEDB1B1677AE42
-:100800002C2F796F4578DD837CFD7B2BC2E63FDDA5
-:100810003B43D7D6E86CBA481A3745902FBFF2321F
-:10082000FE3753BD8F7586E22F3D03D5DF507FF530
-:100830006C38FCD678F5F6EC7D634A070F64B76830
-:10084000EBD3E0A2AD5B7BDEDF3CEFFA1BE7F9D434
-:1008500065CED3383F6DDEFDF59F0EC28AF2FF5D97
-:100860005B4BAAA12E765F8EF22CC8A3CA326125FB
-:10087000E44B0FF378E2E1C218DCE7BE279DF97B79
-:10088000D10D8C6FA2CB6660DEEF72F17B9397D9AE
-:1008900095B30A05BF4CFF9CC2F7DBBF97CEF2B9F8
-:1008A0002DC53F7F13F2D0EF145958BC97C8D3A67B
-:1008B00086E5B1D65AFD01C827BDD75BA771CBCA63
-:1008C000BB683B5A932B55FABCC3AC59FAFCE17494
-:1008D000439E21DA2057821ADC7329DC47F4C1BD1C
-:1008E0003F7FA23FFA20E6D3D9A0878CF0B9CD0094
-:1008F0001FA3FF327D9B811F2ED18FD9D09EBD07B4
-:10090000F26A2AB5274701FEE0117D2F5A7E16D3E1
-:100910002051F98C1E47874EAD01BDD84D5500E8DA
-:1009200097B533EF5807ED7354EF035EFAFB8EE68D
-:10093000BFFD2A473EE38D503FD02B47C03E180FE6
-:1009400079C1C8F641F7A2495323DA0733EBD372D2
-:10095000605E33F4F641F7FAF2C7B3E03ED807F42D
-:10096000A73BBF5E671F90F2AC8BC087C9DDA85163
-:10097000D911EBF47C398A2B3F6C3D8EF446125E24
-:10098000CFF879AE1C9B4FDF9FC1E308DAF7A8FDD3
-:10099000B5DB12A17E51FB5EA697C53D49793CD3DC
-:1009A0000FFC7A313C6A75D4F759643CEF458B7B78
-:1009B00069FD3CF94CCEB6A7C90DF09C38332F32F7
-:1009C0006E8B16E748CFB882D70D4BA4D71FFAB36A
-:1009D00020E1F308FE1E81BC6474D2E9DD2EDAE565
-:1009E00013AF920370283AED57211F62AB10D05E0F
-:1009F000B22511B46B2ED5BFBAD47EED501C00FECB
-:100A0000561D8B97976498B11DAD881B402E4C3CAA
-:100A10003F5800B9E153C4A760BED1F2179FFD044F
-:100A2000F435D5FB1087F19146DC67EDB4F8303E24
-:100A3000D1514147CE8038CC724B1AC6D3539F8DCB
-:100A400071C3D7FCED102FB779D87EA82AAFBA12A0
-:100A5000CECD985E344A20F4F9341F8BDFCC81F878
-:100A60000D8C3BEBF40E88FFCCF632F9057E1BE8CB
-:100A7000CDB9F5778FFD91F4D7C46DFCEDF1D918A0
-:100A80004F92305E60880FD90AA7607C48AB53F163
-:100A9000158AB8BF9B2439F11C0A637CC718CF3173
-:100AA000C67B8CF19DEFE6B37D1A9A3DD598AF8F4A
-:100AB00017DE0D7B1072C05EA2A292F275878524AC
-:100AC0007752FA3C58F229B993CEC3F94313D48034
-:100AD000D37E7A3BEC52E55690CA958F6121BB5E7E
-:100AE000B7807F5B2DD7627CCF48F70FE5B378DD09
-:100AF0008A7CA72E1F1C6C6EE2EF47A980E7EA9163
-:100B0000567F546ADF3897CA1F8FE6CA0FE433BF97
-:100B1000A213E89C7814DC4F5091E7D2D12D691CC8
-:100B2000423E0E8BDF18BFABCD471BFF72E7713F14
-:100B300087F7A5F2C9DAE202BB957EFF0CC5B18842
-:100B4000FA921AD461F1692D7EAEBD570379832CD8
-:100B5000B02305CC1F68F7C3E2D866A0DBE82445C4
-:100B60008E74DED4A1FCDE3C15E631B5EF104141B8
-:100B7000B950CFF335DA7866E26E413E00DAD6E658
-:100B80002546889B138FDD4649A66E8D4820FEE3DF
-:100B9000247227C49FADED166C13B56A2FD8E98B6C
-:100BA000385F580BA7EC85B89AC617C6BC8D554C54
-:100BB0009A02C3D677EAF357C6FC94D19ED6E2EBED
-:100BC00066FA1198D7FFD3F04115B57869EB7D0A25
-:100BD000D7F30D5DAF46571559DF7643FD495B945A
-:100BE000B2AE96CE4B7DDC8EF10A07CC0D6012A022
-:100BF000BF20271FF7FE04E4EF5FF2D9F9376D023B
-:100C0000AB47D99DF88784F0FD0B7FE1FCFB74BEF8
-:100C1000C4E222661280FD52644C02F285567F7255
-:100C20003091D981D38B1607EEA0ED5FF07AC96BB6
-:100C30008B366AF9FE4125B9044B3F002E6BADACF3
-:100C40002EEDE0D566AC2723E2FE9D7724F4D5EDAA
-:100C50005EBB49EF57DE98AEB7078DF69FD5D08EB5
-:100C60002BE072ADB7FE44B1631D5922AF23E3F30D
-:100C700037F2C9CF9A595EE3E7BCEEFF977CFFE5F8
-:100C80007FF1FABD4D7CFFE5737CDFAC06F7FB2CF2
-:100C90000AC6A38F5D4F6DBAD8BE38E0DAE27BDDBD
-:100CA000C0C7E30B587C68B2E8DC097AAA6F9FC51D
-:100CB000C0E7845596EBF366B37DFABCD9DC2A7D98
-:100CC000DEEC0F59B2A76008ECC368580EE714CCED
-:100CD000582162BE726DDB19D4B3E70AD1DABE5077
-:100CE0003EF07D18DA3E0EED7E69013BB7C8B133A8
-:100CF000D102F5F83356C44E81F83971655E92FD24
-:100D00007603C4DC613ECB5D16380F62462011E3EA
-:100D1000A1B5ED9737CEEA5157609CBA37CE4FAEAA
-:100D20005900EF1FD2E2FC6AFA0288F31FE271FE5B
-:100D3000EA826B1F07FFE8E97C7926C06359BE5C35
-:100D4000599003F7995CA0EDD9E16DFAF35AACFE26
-:100D5000FC896A78AFBF78BA3849688C542FB2B82A
-:100D6000A037CE5507EF137B6F9C6B116B77E23E7C
-:100D7000BB26FEDDD6F748038CD3FA2269782E8293
-:100D8000DDFD9D02411BEF16982F716BFACD775B4D
-:100D9000A4F1445B6C0AF8FDC7787D9971BCA6028A
-:100DA000B61F938E7717BE9FD43BBF261C9F8FD74D
-:100DB000B77FC615034CEBA8514C3D949E489B88C9
-:100DC00075278E2ED754A84B225346601DCBA1B257
-:100DD000CA7F89FD3487CA7EF36FB99FE63705A9BC
-:100DE000480717DB4FE398499448718D97385DEEBB
-:100DF0002CCC1A1C1A004FD6A67D41B0337ADB6684
-:100E00008540DECFDA7400EFDF17E5AA89685F70EE
-:100E10003A6D2B5BE48394D0AAE42962B8FDF2BB5F
-:100E20006C654F4184FD8967469EDD05AA69669918
-:100E3000601612D0DEF608547E662F9B21BA25423A
-:100E4000BC8D0F4EBA923E9F9544FDBBB0751734D2
-:100E50003CBB8BB22B292C3BD49A40FBBD98AB1CDE
-:100E600082F18BDDD26E68CFF26560DDFB7DB1046F
-:100E7000EDBC63A3ACFE0DA917CEFB049F3795CB49
-:100E8000CBCD972197DB9AF5F9EF55C9A397C3FC12
-:100E90004797921048D834F7E912C8FF8DCD514ECC
-:100EA000005FA5B9896C1B87F7651296BF318E1B51
-:100EB0003581E9DBD1A1A4FB219E7C50F3F78B2F78
-:100EC000DBDFFF221CDEC6EB31CDDF5F19D9DF3F50
-:100ED000B6283E723EA0ADBE0EF201C756EAFDFD39
-:100EE00063EBDD35B0CFEF18F7F78F4DA6FEFE9818
-:100EF000FEF301DA3AA91CB24D00B9D39B0FE0769C
-:100F00003B8F6BFB72E468784EFD79075CEFCD9206
-:100F10009D13E0B9EA5A80FB9149E47DB2E4319730
-:100F20000C7E8EB6AF3DD3AB0C81F7B5FDB2A341BD
-:100F3000B4C5415ED4755B247A9626307EF9EBF316
-:100F4000A4BD794C13EEA3BEC438FDA5F693BC9B9B
-:100F5000583D8E99D519462596BA213F756E8C1D40
-:100F6000F57B3BFC2F4CAFA61428B91386848F6306
-:100F7000385F55BAB4EF6A75FAA0AF40BF74135228
-:100F80000EF2E681D8468C7B9471BC1AAFD74D70B7
-:100F9000713DEB4A0078A614F8A620DE9FDF24E11D
-:100FA00039B0FC7E7FF5FDC6793C63F57D80FBEBB7
-:100FB0004B4589D5E511E48BABD25DA8A735FBABDA
-:100FC0006E422A3B578184465AE93A5BE55DCE2C56
-:100FD000DAEFA3C7CC19F0DA4F638805E6ED4BA72B
-:100FE000728EAEA3D4AD0C1F483EC28944262F5C3E
-:100FF0000382C98DD778765505B87F013F3E767656
-:1010000008D8E33F7D9CE5A7AE7A7C91BD2E6CFCB1
-:10101000472670B999C4E65F230B7E2915E6731A3B
-:10102000F350332493472690373E77642EC409A9A2
-:10103000FD360ADB67B01D944C5990D7FEC8FDE51C
-:1010400011E87FD5F7175F81F4CFE1B17059D6333E
-:1010500068E7E728DF03FC070BCFC48C188376FC16
-:101060003AA0FF8502F145B213EEE778BB416EBCB2
-:1010700009E8EC06D94660DF5AB0C48670FF699172
-:101080002081DF3A1D681EE2398F9931DE4CE17113
-:101090000B3CDFEF71E0B9D1A5F2B36668FF61AC3C
-:1010A00040AE1C401F5F365C0BCF0C017EFC08E895
-:1010B0002FC2FCEB38FF6AFC44E15E8AF39259BD13
-:1010C000487F74F579BEBC0EE8B23D4D69C073111E
-:1010D0005D332FE95CC4E93FF363ED9EEDE9C6A102
-:1010E0002442FDD741CE27C6FBFF3981F9054B3895
-:1010F0007F5CF5F8D9FDD7035F2FB3B800AF4FE79A
-:10110000FB7E0178EBF5BBFECE7264B2588DF80B16
-:1011100056D0B9E3390E2406DAD3469A117F6A29EC
-:101120003FE7E32EE26A8DC5B7B06D5F26209F3999
-:101130009C9D5560349BF31B8FCC86F74A44DCD7CB
-:101140001FB6CF65C03AB210DF7FD606FBCFA82D01
-:101150001F5C216AE76E1181CAB6609999DBF79F1F
-:101160003E2ED33F9FE1F5991F14894F407DE61134
-:10117000136B1F2A125396D3EF8452D83C3A1E1495
-:101180003C2D125C9F5A07F9CBFA26C1534EDB3532
-:10119000817B7A20C4B5E4611B0157E1931F2E9D2A
-:1011A00002EB39E32678BEECDC44C6374A90F84DB2
-:1011B000A97DFEED87C9C4AFE54B611F9D97EB99F3
-:1011C00087601F1B9DF775EA77D5BB216F4AFD5ECF
-:1011D00088ABC579583E333A68F6F809F8BBAC3E9F
-:1011E000B2ED7E813C04E3886B5AC13FB7F17ADDF2
-:1011F00068B916FDC7384A9F1268D09059B78FADAD
-:101200009E2848BFF1E5943332E0AAF78FB32FB29E
-:101210009F6DEE8221B1C02FE726E8F765F4175FD6
-:10122000D7AE70DE0DE0A78BE757B752BB1DD6FBDC
-:1012300022B5DBE1BA8DDAED701FCEA9862BEC6703
-:1012400083EB4E6AB7C315F6B3C115F6B3C115F6F5
-:10125000B3C17BB09F0DAEB09F0DF71F16A981C122
-:10126000009F926802F9A1360BA33335D98AFE4656
-:10127000A08860FE3E986CDDB01CE27502C3931A34
-:10128000CB9E0763949BB19D3A86E577CD9E14D89B
-:1012900047B842182381FDD46E55B07EF9D8723319
-:1012A00081FAE5D054E103C8BB10C1E411A97DB3B4
-:1012B000FDEBDB10FE8B656282BAF4E5706E28C828
-:1012C000E3CFC806169F0B8A70BE5C6B0CE1756499
-:1012D00037F9654A7F2705ADBD57017F7422C404E5
-:1012E000907E7729F07C7193C0DBAFFAE59150D7FF
-:1012F000A03D7FF349882FAE30B4BB4DBCAD0E7F0F
-:1013000012C63BA27D4F1D5603E31D49D39E272ED7
-:1013100084F6C751DAFB9F2F84F783BDF33989E345
-:101320008592B5FE520DB67BFDE7050AB687B0FE85
-:10133000EB77EE7B0AFCE5BFF778AD8A8A717C75A6
-:1013400016211B6323F0FF44511F0F95055D3C548C
-:101350008BBF9B1CD557E2FEB3076C28173F4E2668
-:10136000E887F417170D8BD7635CF4E713FB897FCD
-:101370001285C0B855100FF4E05795F0FD69446828
-:101380002450A7EE3B1523811D694D0A8BDF71198F
-:101390003050BCB0B591C507838A85A8A97D75FD7D
-:1013A000D6425ED7CFE3855A1D83B5F047BABC81DC
-:1013B000315E48C45B301FED5BA48F074E572E2F64
-:1013C0005E584D02962B81FE65C103FE7BB54BF93D
-:1013D000F00AB4F7AF61E7334AAF61DC54DB37069C
-:1013E00077E0DCA92ABEE68E5B8F7D7005EDE75FB6
-:1013F0001E25C166FCF9B794E0FBF9748510DFAADD
-:101400002E4A4378E77CE6794D0279EA3679989955
-:10141000E6FB7E22D80B8B62316FB2E0CE8C0F617F
-:101420009CC5AA03DFA37625A7F7AE27809E4408B4
-:101430005C86B5B35334FA9BFD04D0FFC478AD1D70
-:10144000FDA45C484889557B3F07DBF314CE7F6AD7
-:10145000FA93C07F474A357A7DA3069ECF1ED13BC3
-:101460001ED2F74487D6BE71213C6FEF1DAF1EBF61
-:10147000F70E9C6C84ED494F823E2A99A1E9ABE3BB
-:101480004FC0F86DD5DAFBA3FD108F9A6FD2F887A5
-:10149000F8819F15D2DB96412FBECFF9FFC8B64D1C
-:1014A0003550D77593F65CDD84EBADE6ED77B62964
-:1014B0004F023FFDDBAFEF7FF87BC6F602129C7C4C
-:1014C00065761F5F18E5D56BC54C8E781B9E05723F
-:1014D00025D58D4FE1F96E100F60F9ACC4593E90DF
-:1014E0001776D1433983F8DC2E8C731AC7595CC444
-:1014F000ECEB4F0BF579B136435ECCC7F353FD8D62
-:10150000F3269F4F7B69643F766C4EE99785503F89
-:10151000404E8B309E8B020CCE276BC952BE82FB95
-:101520009475F1DC4D2AB23C709FFAC52AD899D344
-:101530002838210FDB52FC28C6E943F916DD792053
-:101540005A9E73AD5546F9F809AFEB985F2A4FBE26
-:1015500087B66B878A6403D6793831DF601E667D73
-:101560000AE53ACF7B6AE7714CBBC8BE08E3BE947C
-:10157000CFF97ACF147658403EAB449D5C968DF2FD
-:101580003A08F5C626C71ACC03DB8A2D9847D0F255
-:10159000CF0A3FFF5BCBFB4E3C3F98E9F7742DAE83
-:1015A0003B70FE5769DAE143FBA0532426E1C27C7D
-:1015B000F0629F9A0CF52CD3CA6270BF4055DDEBE8
-:1015C00038FEA11482E70447CF6AC4FD41666A1F52
-:1015D000CA00179E2FD6EA63869FFF0EEE1BADD77B
-:1015E000EACDC58A0360A7DA1EA17E1674E0F96011
-:1015F0002D5F3CC320EF171756A29E25D48E1F15D2
-:101600000BDF1978DFF3031359FEF84427ABE7F734
-:1016100016E9F3C0F759589CAF3D4D4F571B273281
-:101620007FF5075C9FEE2CFE7915DACFC4E481BC10
-:1016300018798C9D0B073116DC6F653C8F397D0E58
-:10164000DA758F0DA74BA4B6B6B9E97D8C2B0AEBE2
-:10165000D87B9F8D238DE0B798CDAC4D2F2AE4FF2A
-:1016600033BDCAD422A8B368FA10FBB7AAACDEBB5C
-:10167000BFF8CDBC226D9F088BDFCC77EFED817D6D
-:10168000657F731CC7B0EFD527B1FA929585929606
-:1016900047C0730929E15AC05E4C29F0D5C3BCC9C3
-:1016A000984D12CC4393373B5EF9760DC81B224709
-:1016B000CE4B6B7CDF66C84BFBDCECFD378BEFAEB3
-:1016C00081F30DFACB433C5C2268F1B53B8A605E46
-:1016D000095ADE40BE13DABD7A1416E4D5E9D18585
-:1016E0000DFF0BF4689FDDFE760D8CF74D9B3FA53B
-:1016F000ABFF42BC96B3F8D9376DFE1326C87B60AA
-:10170000FEFFE8EF8C99E07B0BBEB35A90AB9C2CAC
-:10171000B9E711F479BE778B06C8F35D2CFEF07F34
-:10172000F18681E30D62F1BF66BCC10A7BA87290AD
-:101730008FAE2C06F95CC8F8E8DF5DEED1F5E6C0A7
-:101740007A570B9BFCD123FEFEFE7E4A8132A918FC
-:10175000F5A062DA49E96775899DD9330106DFDEB4
-:101760007806CCDFAB8B673CD9F00F8867D0F55695
-:10177000227ECBF8F7BFF9F8BB15E12B337BE2DF14
-:10178000903E57E3FA36B1F5FD13BEBF1EE9E5976B
-:101790008C5E7AE1C3EDA430F82C6CF8E7C0E75713
-:1017A000089FAD6C7EDF007CEE42787AD87C2FE615
-:1017B0005F1F2D1434B9FC06BE97CDE8E043B0AFEF
-:1017C00099DF3DE94AA9CFEF7E34573E50CCEA631A
-:1017D00082C5BAFA4FF910B407F08B8FC0F3087EB8
-:1017E000F1FBC5DF40BFD859C4E0D69777F1B3739A
-:1017F0006F49D50D57D3EF7C48E10DF1B68E261118
-:10180000ED8B734904CF03D0EC8D502CABDFBB7054
-:101810003F581981FD88B67C76CE88763E8059ACDB
-:101820001E1C902E84EB81418A15EABC96C8196D66
-:10183000B0BF75D29A2F70DF9555B6E1BFAB39DCDA
-:10184000EDB1DC097E34F573AF83786A830BF7D191
-:1018500069FBCAB4FD1F4B02F3F6C23EDB0E4A0F12
-:1018600089F43BD3CB2CC7C3D76FB437CC86B6F142
-:10187000DF354D98A8AF07A4F047FBE7DC3A561FC9
-:10188000D761263BA1FEA35E15FD2DB4BD718D80F1
-:10189000E7712EA270027F7F52672AD6935B93D89E
-:1018A0007967DABF7B4AE9A0331FECBF2322C17FEF
-:1018B000C78EEF27D3CEF98E9A7A1ACFDBFA98AE7D
-:1018C0001FCEEFD1CE9998C1E9448367544B3CC2F7
-:1018D000E51C850B01B8F0FD36D39A583EB8AD7AB9
-:1018E0007110C8BBA6F08B1591EA52E6B8F5E7A5D2
-:1018F0001BE319C6F3C6CDC43718F6D54D2F2C51AE
-:10190000C15EB5F17ACD6822E3B9161FAFF9093B84
-:10191000D7A2CCA23B47C4F8DD68039DDA0C71075F
-:10192000239D1AF1729D012F1BCDEC9CC1B66ED187
-:10193000A3D2DB6D0F2F6A877DF9EAC32656374F96
-:10194000643CF7A98D5ABCB8FF9C4E16E2F573397A
-:101950003C35BC10D268017EABD6F6A19B1A57C2AB
-:101960007ED2797C1FFA4D6413EE3358001604FDC5
-:10197000EE4208918B70AE8C6465CE818BC03CEAE0
-:10198000ABD83919265803E4091E3621BFB6B977FA
-:10199000E2BFFB15186A893D99CEFC8948F66C6F49
-:1019A0005C8142E264581CFFFFE2577F5BFC2AB770
-:1019B000889D47D5161570E5A7B2F326A09E29B7D6
-:1019C00048423918B42829B8DF61FDA72AD081B66A
-:1019D000DF81FE2CBB427F6EC2FA8903F87F45454A
-:1019E00004C76B4B0D25835CFBB09FBACAEDE03892
-:1019F000303DB46122E6DFA9FD9B0D728FD9BF1582
-:101A000079BEA7F13EDFE7ACC5913EF12AFF39313F
-:101A100007F6E71094C3B60AC10FFB77A63B853DD6
-:101A200082D4F77D62AC63FF5F9AB7BA93FB6DC156
-:101A30002882E720055349D57311F0F1835216A788
-:101A40000C6644C697F69CDA19EF4CCC61FED020A8
-:101A50004614A7ACFAF8C00703D18786C7F8C9F2C5
-:101A6000471373FADA0FE4299F40BB55F17D0078E4
-:101A70003DA98A12E8151250F03CBF69FF21BA0057
-:101A80008EFFE83CDCCAC2D44BCAC355039D0D503F
-:101A90002F78B9D7FF0FF9613D6B0080000000007F
-:101AA0001F8B080000000000000BED7D0D7854D561
-:101AB00099F0B973EFFC24998409041C24C00D0229
-:101AC000461BDC81802440E0CE4C12124860F83581
-:101AD00002E285008D5DB451791458BAB921102005
-:101AE000A260BFB4B5EAA34310DCDDFAD4D475AD6F
-:101AF00088AE23A2A55DD4A8A1C6556910E4B3ADF4
-:101B0000ED870A6BEBA7F57BDFF79C3B73EF64C2B5
-:101B10009FB14B9FFDC2A337E79EBFF7BCE7FD3FD8
-:101B2000EFB939EA648C4D82FF8CC2655A01632D8E
-:101B300058BE9CE18FC6A0BCB8BFA59C0B4D3B799D
-:101B4000FBD1DAFF891A2319D399E82FDABF23F1E1
-:101B5000F6478303A28697B145A21ECA3A96CDFEE8
-:101B60008C29794105FAD749667997A658E7CBDAE7
-:101B7000A5C17C279CF6F19788F18AB42F69FC48AF
-:101B80007CFE2FA31A948F27C17F03E3E552EDCF8C
-:101B9000D47E65BCFD9F755CEF49C92C8FD2B1FF27
-:101BA0001197D9FF8A6538FF3D79BC7E6A6854D4A5
-:101BB000B804E1F9A6C7BFD0F647A7A88C0D047CEE
-:101BC000D4FD2C7C19FCBAA47E97AC43BFA3CEC82D
-:101BD0007B2C07C8EC5E49DD037D8A58BBCC6402D0
-:101BE000DB258F87213489B5C05C2B42F0BF09808B
-:101BF00047AF83CF6304A21AD0D9E2A9269DD64469
-:101C000071DEDEE8EE9DE0771FC27527E0FEEE5242
-:101C10001BDCC6A865DA9404DCE110B487F116DF9A
-:101C200072931FE15C3CC25CDF249AA739DBECD7DE
-:101C30007DD6795F7BA194F0BD383E4F25B55F9C82
-:101C40006E8E37278AF326E05A48FB91806BA80DE9
-:101C50009F81D042C267C417DD3C08F013F1B38006
-:101C600001F85C54D728EB05163E32C22AF1913FA9
-:101C70005E8EDAF9A880F8A8AFE11A3629B24D8352
-:101C80007D62F9ED6A64CC37B1EE98F3325CB7212E
-:101C9000D1BA4D3A5AE2B3D0BB07D6AD9AE52B97ED
-:101CA000D579FB62DE8E329AF723C0374BF01333BF
-:101CB000062FD3BC173E5E9377B90BE15EA5495A58
-:101CC00014DA7F853FD312CFA35324E217C0E7BFB6
-:101CD000123E8B009F99F89E111F3C5E18F9B906C1
-:101CE000F54CD51D07002E97E6612D8083AA8991BA
-:101CF0007DD49EEDF423FE01001AA7F975A6209F5E
-:101D0000016F051C93A1EC6435ED29E6FD61C84126
-:101D1000ED9B18AB6807F8C66FF4AD8A7813F5BE73
-:101D2000320E5796781EC9ECBE6120CCDF0D551BD4
-:101D300061FC260398179E1FD4495109D6FC416EB9
-:101D4000645631943BF21C818D307DC73AF7D03513
-:101D5000D0BE2BCF1B40E8BAB27766FA60FC0F0208
-:101D6000B2C0D74DEF235F1FC98CF39381FAA5430F
-:101D7000E0F7D75A711BF2D3DB2A2F3F50FAF7EF67
-:101D80001B05486FCCC706011EB007F0AA23638A63
-:101D9000C70DF3BACA419C605F1FD35D50EFC67A8E
-:101DA00058E29C1FECFEC13C95E4C6CB23AF65AC6A
-:101DB00006DFABD85F31BA3D34AFF295444FE6BC95
-:101DC0003631AEABB5E9A526809FF9651642DEF245
-:101DD000F3F67ED6DDF89503C787723E43127CE1A9
-:101DE0002B58BF24CAF8F3152CD1CB2215790857EC
-:101DF0003E0BB4C07C7374E789783D7F6C57AE1599
-:101E000070223CF2868A6278A6D7D9DBCDCC87B225
-:101E100027519ED15A1B42BCCFD0A0DB58C60EB76B
-:101E2000D6C66A01CEC3456E9F049876E52AB6F6FB
-:101E30003359FB26C43B530F1D94012F4BC57C4DDA
-:101E4000BE39EF31E8B72A1F4AB0FE23FF10CC9C01
-:101E50009083FC26071CA28DC3C407A3764E079768
-:101E6000D30109DA373D63EEDBC436E4033943B20C
-:101E700095832EB37E4C1BF2E191B85C1DB91CCB4F
-:101E80000BAE30F926B30DF96A5A8659762D473EC6
-:101E9000EA569C429E0D6C433AD96A8E67EC20F953
-:101EA000F21633EB1D541F89CBBFF25D585EE81369
-:101EB000F018DF2779D8A4717D72D50BB16EE322BB
-:101EC000DA037F5E19447E8B7079975C3FA933DA21
-:101ED00094857C07F819A5F6E4B7F54199F828A28E
-:101EE0007D2CE3FE95D603CE60FFC23552E704A4F5
-:101EF0004F850D45BE6F6E009D3E0ACA2FA6B9D410
-:101F00004C94EBBE722D05FFFE3CC8F97752D09B76
-:101F100073127157C80A91EE9A1BD69AFD0DDC5FB9
-:101F20007DA42B9A96D7FB38AF851D24673A24DF12
-:101F30007CAE9F6586FA3978EF15DE629668F758B1
-:101F400098EBE5C6426D7A10E69D05E297C11E3614
-:101F50004EBD3F1282794E143B036EE233ED0DE429
-:101F6000B3B9828676B834B60EE546B1DBB71165F3
-:101F7000B75CE05C0B656508F02B962B387DEBF0C9
-:101F8000EFAB1138AE92A07F8063CE5A3B3F28CC96
-:101F900042DF50BF28989973F25B50B89A5D8DEB81
-:101FA000BFCBE95B8A726CEB08DF2D5679F6689837
-:101FB000CBB1A858EF81A9FF5283F8F994390228D0
-:101FC0003FF6A647489E1DCB62AC0D75BEC654DFDA
-:101FD00020E46BBE0E297F21C3F60F0E87250C0669
-:101FE00038D6BED3515A08EFEFE3FD3EBC86D53359
-:101FF0007CAFF0323C0C632CB63B4AEDEE0C8EA06D
-:1020000079D943018F07691F9AE37E7B59BB139FE0
-:102010008E8C6787EA29F6C77CB2D5CE8FE27840EE
-:102020005E024D88EB9698EEF80AD72FE43FD0E990
-:1020300006DC1F90FAA447267D78CA466FE3822A01
-:10204000C1914C77D0AF89FACD37FB31A76EB1D7AC
-:10205000D7077F146D1C49FA681BB5F3823ECAB1DD
-:10206000E9A3BB8229F4D1C84AED6EFE9E97A1FF79
-:10207000BDBDF4FF5FA9FA43FB1FD27B8F4EF8AAC8
-:102080009AA8FD08CBE38799F2041A1681FC186020
-:10209000CA8FF41BEBA658E48F31E1619437D7EB7C
-:1020A00092A8CF7F98F44EC8ECFFABA57679B4E048
-:1020B00061BB3C9A7923D627E44FED4376F9137E32
-:1020C00018E545708ED06BECFD8770FCE62566FF49
-:1020D000D1D120DA250E531EB228F2A1CEE2659BA3
-:1020E0001D79E4D9F6A5A8E74CBF8919ED0F213C6D
-:1020F000A69FF1D6B3FAC3A817412EB2E3261F8CD0
-:10210000E8C9EFA61C30E9C7B40F5F7B31AA1BD02A
-:102110006E6E8516B3EE4BDCCEECE6764FC2BEFC9F
-:10212000DFDCFEEE7BFBF1759ABF80D3DB3730FE40
-:102130007BD6F14D7B0ADE7713FD89F7979A3F072F
-:10214000F09D26F8C673F82EA2FF17B4EE00D75301
-:102150007F0578D343163FE012C4E7B04B1CBE7135
-:1021600021DCEF2ABEDF8F69CC94E31308EE1E74E6
-:1021700070DEF45F42E396F2755BC6D5ACF3F5E62C
-:10218000AF43BB327BBB38FF54105C62DCB3F4AFAF
-:10219000B6B78BF78F842CF4D9077CBEC8BABFDFE3
-:1021A000801C5945E38FE4E3CF4BE0F126EBFBFFC6
-:1021B0001F373B279DEF207AAAE7F4741EF6F60F2F
-:1021C00010BFDBA4763D8BE2448689F7FB701C7858
-:1021D000DFED82F731B11F8F14471EC0F658F48F20
-:1021E000B3F827C6DC5D085FC23F81810A2CFA9EE6
-:1021F0005DB70BD763EAFB27428B761940277298AD
-:10220000B77FF4C0CBCB70FDC965B04BFE99F63FEC
-:1022100007EC92316497FC0BC275AE7101FE76C279
-:10222000C3D39C6E52D43F49E33EC6EBB7BAB81D48
-:10223000FBD6924FC98ED36E551D68C7997AFDF9AA
-:1022400010B767C11EA9887A7BDA8DCF8B781A8C7C
-:10225000FB3CCDDBCEF1DF199133D1DE4CD82D31F3
-:10226000F2831276D50AA2A3B85DC5BE4DE5A96278
-:102270009FDF087D679980F7571C0F623DE76EDF8F
-:102280004170F879FB14F59D345E2E8793790F9D8C
-:1022900040BF95E895FF8C7440799528049D0B4AC2
-:1022A00072C06E39D02AA948262BEF33F7F976E2AF
-:1022B0008BB8DD26F8F07A41C79F84D6D33E5E7F87
-:1022C000DAE4FFFDD47E7CDC4F5D4FF0BF2DE213DE
-:1022D000DF0BAF37E1FB90E053397CDFC0F8A70993
-:1022E0003F8CE3A786194EB4CBD0AFDCC37AEEEFB8
-:1022F00017228E03FDFE2FF5F370B86A7489ECF790
-:10230000C88A634EA4F7A59D4C4B451F72D865F64D
-:1023100097C364970BFF36C0E342C9EDD3C2717A0D
-:102320004AA3F63E3EDF86E2480696A7E8AF870757
-:10233000F1ADF1A03D1A2995A22D79E8DF78CB4ABD
-:10234000A13CC7C1BAC9EF636C33C67DDDCF2AACEF
-:102350002540AD55C512D7012EFD35FA910BC43E6F
-:10236000CF61F1F88A03E33596F80DF981EEF09D1F
-:10237000F9AD2AC55D286EE3F2CBE45704EF5E4168
-:10238000F191F422B7CF8DF3C8B9E4E7BA1E10F18A
-:10239000A2F9DCBF74C03FB4A3D3D732F2DF666DBD
-:1023A00097A22AD4BB357BFCA576C3A926F2EF56AB
-:1023B000309F067EA25264AF7725F9AF8D857A00F3
-:1023C000F172F2BE5A07E22358C9FDB093F75DE1FE
-:1023D00045FE4BF6A34FA21F4D52AA871F6DACC3FB
-:1023E000F89AC58F5ED3877E74386CF7A38715473C
-:1023F000CAC248E78A46F2EDC0D44973C95FDE2EEF
-:102400003337B43FDE3AFED522281BDB9500861B0E
-:102410003E706A4BB1DE007F5A1E46DBC430BE35CB
-:102420005BC07FBCF85429C2AFDD3E2C80F47EFC3B
-:102430006E37E1F9F8CAEC68068C97B5FDB34D69C3
-:10244000D0FFE5E8100CB2C5FDEB643F1CDC2703B0
-:10245000E9E6381BCA5A701F141FC37195FAAC8085
-:102460001148F8DBB3F37D068EA7473318EE7BECFB
-:10247000974C3A99CFE8C801E9780E539D5898C710
-:102480003427E27F01D3A97C1DF09B7405CE976FA2
-:10249000101D00DF61FC6E7DA17E13E1E3414E1F44
-:1024A000EC1E65179E571C37EECD443EDB9B6E8FAE
-:1024B0003798CF3522DEE0413F7F4C9FFAF9EB0899
-:1024C0001E2127CE43AE34F0FDE4FC7A1AFDDF81F5
-:1024D000A427EB90CF3B441CF89E6C1E3F690D7304
-:1024E000B992FC0486CFC1FE17AA27405FEE08DB35
-:1024F000FDF89D583E0F7DF94392334FF2753687B4
-:1025000099297F7E1CE676809A45F11410C5D7F292
-:10251000FDC59FCF25FD611C5F7B4CA2FD4A531971
-:10252000C921378BC4383119623D6CC3207BBFBDD4
-:1025300067EB776390CFFF4191FE136C57720A28C7
-:1025400014DAB9AB781C7CB6577A495213ED8E6019
-:102550001C2A55DC5FC85168167380BDB2230BF688
-:1025600000E3DB4AA01FCAEBB71AB4A368C31D6916
-:10257000A8A06797524FF2A3EB3E39DA085D5F6D72
-:10258000601DA5A37A8E5BB32478F484451ECD2EFE
-:102590007BC403429135E5B71D92305EAFB9553724
-:1025A000F4EFC88CDC83F17AE37599ED017817CEEE
-:1025B000AF3C7AC2221F92C785F998012CFB56982E
-:1025C000C7315F0CBA63D3009E1586144579B0C23B
-:1025D00038E6C478E5D2B5CB980EFBE42A3AA6E0FB
-:1025E0007E96077DB4CED94532332C70DD7FADD6D3
-:1025F00011E6F19D37687F03713BEA4D2C079D5A28
-:1026000096AF20118734CF051E0BEF267BB4239B9A
-:10261000D1FC113F8B36A2FCD296B9BAF19CC51FF2
-:10262000A1B8E9E1B04AF3AE6CDD45F0A44FF998EA
-:10263000E001DB39E6E8DF13DF261FBC2EF0DE2CDD
-:10264000F0DE1B9E3F09F3789E599E5DA664229E94
-:10265000DF50543AE7E88DBFE796DAF7C7EDAFB041
-:10266000959BB4DB1D484F275BE528EE133C5FC10B
-:102670007D3B0DFBC6F212E37464B21AAB7E36F7F3
-:10268000674AA94C7099FBB3743BDF9FA5DB838439
-:1026900097A5A595AEC1FC5CAD1D689BE945CB181F
-:1026A000E2C5A51D53508EF5B65FC06FEE528BFD8F
-:1026B0007811F1F37EA516BBF69B8EEFC37C4369C0
-:1026C000BE243BFBAF75BE60D25327CAD582845C63
-:1026D0002D2BE5FA20F969CA558B3D49714D0B1C2C
-:1026E000CBEB2E020E934F904F516E84774ACEEE75
-:1026F00002DC7FE0D731689FFD76F36539C8378CFF
-:10270000E8C151CAF9C635658E0BFDA695F77DACBB
-:10271000A0BE027C4E277C0A393CB694997A6806A2
-:10272000D1451DA78BFFEE731D806709C1B984C316
-:1027300079A99D3B7DA73A525F4AE7402097BC1894
-:102740008FF789FD674379DCFBC2CE373F68BD9DBB
-:10275000A11D38E70F992ADA818B8AF768796ACA4E
-:10276000F34D55B29D6FD68618F9158C8506B37357
-:102770009E6F269F9FF63CEF345E6ACA49D8DDC93A
-:10278000E79DC9E79AAC97F3CF9EE79D2F561503B7
-:102790009C3302B24F5513E799AE2927DF65D7F472
-:1027A0003CEFFC12D623F099C32CEBED1AAAB6C766
-:1027B00000BE96C19E401B6FCEE46B1378043DE0D3
-:1027C00071C33C9BCA007EB497F3DA7E308FD9F098
-:1027D000E8223C5C201EE97C1BF1D22A4537627F4F
-:1027E000A5DE4079BE92F9D4FB0389FD8C8F977FDB
-:1027F0008786F2F91F6ABDCC01FCBF39E736B60CFB
-:10280000DAA71F4E6332B43FACDE46FB7DF8A34C23
-:1028100015CF7BDD7ECB3E085C2A267C724F3FE9DC
-:10282000AFB08F1E64B91EFBA8B695A29E3DDFFD1A
-:102830007BA4387204F9D803FA5A199778DF3594D3
-:10284000E3B3FB2A166D937AEE23E05B23BF339F3D
-:10285000EDDA48F5F50CE3039B24C6F19D44178E91
-:102860008C0D069E6BBB967BC98F6AAAAF277CBF77
-:102870000EF8367C9CBFF09CEA2CFC65D2059306D2
-:102880009D3F5D24EFFBE1D65AB6F6D2DED75EF867
-:10289000737729DA3DE7BBAF5593B57E6513ACFB83
-:1028A000AC65970DB4F2AD21F2520CDA47633E638A
-:1028B0007BB27BDA51978BBC14186F30F61F52C66F
-:1028C000441C501B82E579C3597DAABC17E774EEFE
-:1028D000C72C01139CE22A463ADB331EBDAC9DEFA8
-:1028E0000D42BFCEB84AC532530F4591AE6AF912B8
-:1028F000D8911DBBBAB07E362CD69143AF54870514
-:102900003F81B23C1AB778F5B15754AA0ED0F82ED1
-:1029100010FEE8A72EC197944FC2A27B480EE86C28
-:102920002EC8FB1BD648EF61BB1A2383A15F9BC84F
-:10293000AB783429AF829767E78A7AE3DFDA6CE70E
-:1029400098C60B49FAEDAD36AB3FC58C63A4DF6C7E
-:10295000F685459F1D79E9F7CB0DEB39A6F1318D51
-:102960007F7489395FD16EFB39E69734BE19A7664B
-:10297000EC332A2F89973F27FD6AC691FF5436B161
-:1029800096C74DF5B9B8FF7258AA47FB08148C26B4
-:1029900051BCC6D786FE34D8FFF3B0FE6F7D9D6074
-:1029A00087DC5C6639FFF85B83FFB819DF370E2FD1
-:1029B000D70A2E7D7801DF0F10BE2B38BEFF06E050
-:1029C000FD59598A73804B08BE9708BEF839C47FF9
-:1029D0003B3C6F9559FCCF6F7ABEC993B513484FF6
-:1029E000DFC03A4E9559F20FCEA3FD7F517B715E49
-:1029F0009A5C7F73B98FC7B1C439F1DBF173BCAC9A
-:102A00005A1CAF3B71AE47E75E8973C4E157044778
-:102A10005AE11FBE1BDB9BE78853CBF36A292FBA11
-:102A200097734C0DEB156B7F95FAB724CDE712F534
-:102A3000F3CBBF556BD8F07335B5EF486A5F23D63B
-:102A4000B7BC7CDC6EC3820FF038A97D5C2EB189E7
-:102A5000B5F673C709B5D673C7D5E513779BE7FFFE
-:102A6000E5881F714EFB3F1D1FC172E16F8AF37233
-:102A7000930E874DD242E5132E3D7861FF16965B8B
-:102A8000E8FFAF30DF8A724BDEC585F68FF3A3D047
-:102A9000FB66FE04E0F7165CC7CDD355C27F72BE5D
-:102AA00084E92746BA5914FD96C92C2AE3B944246F
-:102AB000A0338C83C6F9DAD06A295E17BF1F51B1E3
-:102AC000DB7E3FA27137DA1709FDFD54AD3DCFA182
-:102AD000DC06F78E979F32D7DD546EC967E8EBF1BD
-:102AE000574FB7E3255E16F8597CCB8F87DAEF5F37
-:102AF0004476D33946FCFEC5229A3791DFF1EDDDED
-:102B0000F6FC8E35544EEC5743D27E7DCF06D71758
-:102B1000E50D04974BE4BDB95648BDDCAFB89EE463
-:102B20008279AE0B659B5CA0F23700D741938E048F
-:102B30009FC6E1EC919FB76C37C699FA7A7E8B5CA1
-:102B40007809E9A2EFF1CEEF779878EFED7EC7F53F
-:102B5000AA59FE6E6D5DC1D79F17F3FFCA53E61FDA
-:102B60005DEC3AF87D1157F27D11B6AED62E7FCED0
-:102B70001BBED3A9E5CFF9F5FFB277F9F317943F60
-:102B80004D5E07DD47D1FD2CE57D949BA7F373A92E
-:102B9000387F8AFB28F376A4F6A7FF7E3A8F5F9BE7
-:102BA000F1EEA0EBD40AEB79D70051EF9B1ECF1BBF
-:102BB000F04DC771D772F886A13CC4F31EA6300D44
-:102BC000786AFEBCA1B9085FD37FF2F1981FFCE4DC
-:102BD000CCC47893C578E63C2FCCC9ACB1E635E4DB
-:102BE0009AF34C97CCF8F4B0E988CF0D7C1D72BFF6
-:102BF000D574CF2BEE571BAD24BF9A9DA69FFDE049
-:102C00006E92677139F463A28B056E93FEA3BBAD20
-:102C100071E3B25FECE67A158A788E97E8775F2DDC
-:102C2000F979E7E85768E27993D82F23BE5FE3117B
-:102C3000EE73F5B7F8D1312927E1473F5EA84D4142
-:102C40003C833F5D723EE3009EC2B42F6BECFE8876
-:102C5000A57EFA745B5ED2A9D567CB4B9A3BFDEC9F
-:102C600079497313F43077BACDAE0F674EC038C9C7
-:102C70006047CA7B14BAD8D7447ED74F69BF9A4DF4
-:102C8000BE13E57BB279FD0DBF78BC56C07FE374FF
-:102C9000CBF98579DEC20A0EC530CE63C92FD21CAE
-:102CA000D6B84FF89813C75BBA5D4A993FD3835F94
-:102CB000B68AF1B7C7F7F1E6E93C1EAD63DCF17AFD
-:102CC00073DC6F37D2B8352BF8B8C97C73A788533B
-:102CD000DD99A0E33B691C2D9E6FB30ECB9832E0CB
-:102CE0001E9718DFBCDF1374469EC3739D66435264
-:102CF00051BEEA6B97D1B922AB606C14EC5370F003
-:102D000088ED283ACCF98657F0FD825F4BB19D1FC4
-:102D100024A43118F3C497D1B9F3B51ACF5B9958ED
-:102D2000D5280F5429AFA505F7AD78FEAE265CF681
-:102D3000754B7E26A7CA67E988E7B3B037460E020F
-:102D4000FE16F0E1BD903530CFDBF17C96AAB23BA8
-:102D5000ACF92C91AF97CF62C6FF168700AF967D76
-:102D6000CBAEE078CDAEE0784D9C03333ABF1DCDBD
-:102D70006A665C85F165BCB705AF3BC43DB733B946
-:102D80002C8AE7FF8D53D3298ED79DCDE85C15366D
-:102D900024ABFA5ACC23E13F69A34A298EEB86750E
-:102DA000E13AF05C3676250C2F2FE9174B41CFAF77
-:102DB00066E92CE0C5B8BFB19901DD84F57BE97CFB
-:102DC0006EF88A8FEB70DEA5BA5B4512B8BECE579F
-:102DD00046795CAB03CE3B300EE9979986F1EC2A3D
-:102DE000E7FBFC9CC643789A5DCACB265EDC4C7937
-:102DF000DF8A1725A9BCF6DDC62D072DED5DB1B420
-:102E00004C3C177C69BAC80712F78A98EC253A3807
-:102E1000E37744F11CAA4361071480A35697E9FCA9
-:102E20007DCFF65B5FC1FB634BFD4AC001EB0CAF8E
-:102E30009528FFEB7A1FC7D3670DC6968360C3A69C
-:102E40000D1E41E730677C1E8AC6372FD943717B40
-:102E5000A0970E05F37AD6C90CCFBDCDFCA7398259
-:102E60005E4C3CA62DFB94F07206CFC3112F45D9C2
-:102E70009407350BF0A1FAE89C7F13E2299DD5C792
-:102E800006C0BC0BFD0E16B3C4A161FDB63C3218E2
-:102E90009BF2CE147A63AB27FCA4AF0BF37C34B95E
-:102EA0002A86FB7AA688EF2B940348EFAC94D3A92B
-:102EB00089FFF4243A7527E58725D36932FE4F232D
-:102EC000DE2DF7B9F6282C10437AEB94C9BEE86ED4
-:102ED00055B228EFAAD54179578C45E91ED31ED6A5
-:102EE0003FD082723326D139C175026F26DE19AB0D
-:102EF000DFBC1CE3DCF559018CFF3347FD66CC8F4A
-:102F0000BA3E9A41F9778B583BE541DD801E32CCC1
-:102F10007B23F3B9B0BC9C05E829B102BA5FB2507B
-:102F200097882F7416ABBE0AF017BBDC996DCDAB3A
-:102F3000EA35AF09567ED2721ED1BF42C84B8FEE22
-:102F4000E7799EBAB8F7A3517E507659A9474F2129
-:102F50006FA715EB832B0626CA8AAF9ED1F9747131
-:102F60006448C58444FF470BB55C6C37AE481B8A88
-:102F7000CFBD68E7813E081F1AF508EA83C6424DB7
-:102F8000C5F6C9F2EA78EFF977B1B540775D28AFB9
-:102F9000288FB080F8B0AFF2EF0A2B7AE4DF4DA8AB
-:102FA000B0E4DF1D75F27B65948B3C99F5BC9FB650
-:102FB000F63AAA37EFA725DF4B630FF2322CC86829
-:102FC000198BF777EB69DD26DE93F1C3C4BDB4C579
-:102FD000FE97BBA46BFA206FCD07C6DDE0B3D187A7
-:102FE000C1EF2F57DFDA954379840AE51136E7F10F
-:102FF000FBCB9BB00926028DE4F6E097425F6DC9DA
-:10300000AEF707A07E8B93E7C3B07C9DCD1B9318D2
-:10301000F7CB0AD93C175A8A7400761FD94BA6BD44
-:103020006AB6AB157A6195D00B8F17465612FE1310
-:10303000F9DDABB03FF3C6A20EF3DC8EFFD03990C2
-:10304000693F1C19524FF9346E2DB5BD706B455C4C
-:103050009FDF4AE3B79AFA5CBB0DCBD306F8E623B1
-:103060009FB9C2326B433D36FB6692BB4F61DE288F
-:10307000D83413F5C6F020D8EF860A71DE54978D48
-:10308000E8621D1ACF278D95D4FB51DF6D199CFA8C
-:10309000DEF761B1CEF1C34EC938EE96658C6D1C7A
-:1030A0008BF833288FCD5800B204CAE0EE1FC473EA
-:1030B000190FDA01C5A817797B5F1DB4817D6C17E4
-:1030C000F80F8E06FA41FB6B943D1FC97C9AED9276
-:1030D000F3AD409467E2BA93F3DCCC7CAB2EC5C869
-:1030E0000CA4807F76D91A0FE56BE52EF7A09E6CB5
-:1030F000D6C2345E72DEDB965C3614E14ACE6B33A8
-:10310000F3A6CC7C2973DC7FAAB0E7B5B9FD5C6F70
-:10311000C193F2647E5AA1F2EF5268F6FC3633BFD7
-:1031200006DB537E4D2EE3F935FE7A86FDDC50C674
-:10313000F611917F969C570572E86744573DEC2342
-:1031400046764673B1C81B60DAE665681FE1F96D23
-:1031500020857D050201F5A00BF413D62BF2EA0AB7
-:103160004CE5F9BA76D4B4E2C8CB48972E7F5CCE52
-:103170001E22781372F697580F72F65756397BE66F
-:1031800090F108E66F6E91381D6E01BC3F91823E52
-:103190008E5448828F53D3CF1F04BD361646DEC2ED
-:1031A00079B41C7EBFE342EDCCE6849DC9F1D847DB
-:1031B0007626E0E377840F21A7011FBF473893F1FC
-:1031C000003F9B506E58F24C3FC57EBDE59926F7F7
-:1031D000BFD87BC212C80DFE1D09ED2F0857D5447C
-:1031E00095EB5D218F13F76D2F4E5E773A408E027F
-:1031F0003C681358DBFB2AB99C2B98ACFB2A492F5F
-:10320000F3FBBEDB82FCBE2F8B69A4F78F64EA352B
-:10321000C8A72C7FDC39E66B14F9B47A5D84E4FC32
-:10322000DC73B4DF48ED0B268BF5E6F727FDB14DD7
-:10323000D2EE4B9713E573ADCF53A98DAA447F53BC
-:103240008FD0F712B6E43B54039676CF44FD5BB8BB
-:10325000AE2DF91B69FF5A80E024909BB31CA7EEAA
-:103260001E21513EF0D3523F787AC0634B41D7457F
-:10327000023F60C5523D7B57F35BE31CB595F1B847
-:103280008A884BFCF323D67B4C732B7FB202E3F18D
-:10329000A61EC378C91329E82224C691DDB7DAF443
-:1032A0006472BBD24A7E0F645EA5381F107A6F81AC
-:1032B0009BFB51EC30C067D1AB05934315955C6E19
-:1032C0001992451F9AFA8F6A2CEFDD7E7EFF847576
-:1032D000DAC731D7B942D0A9392FD0EBFC4A1EBF8B
-:1032E000585069A95F20331EEFE8B0E30BE0594462
-:1032F000F03076A217781E49094F971D9E1571BAB6
-:10330000D556E078A09757E2736B08E82E057EC784
-:103310004C08DD84F50A33B68EC83BABDD5A8FEB23
-:1033200030CB16BBF5B64ABB3CBDBD92CBD3359571
-:10333000244752CFDB50C9E5629F7D3FE03CF9FD59
-:103340002EFC3505DFB4743F99710DB09ADB6DDC4E
-:103350004EFC5930EE1CFCC5F9F9C661F5A4E79E98
-:103360001376C8734EA6607E0DF0582055DE4FAC24
-:10337000D2B43BA243102FCFF46277C4DBF5925F47
-:103380007F25DB997131F647CB942319647F9C6EBE
-:10339000CB403DFFCC89504AFBE3B9DC9D4352D979
-:1033A0001FFB7AB13F9EAE14F6C7072EB2274A3EE6
-:1033B000E4F647C9873B65B423FEBD52A5F5149FCB
-:1033C000E8907580BB04ED0F18679FB03FB03DD902
-:1033D0001FA777CA0857F1871DD4AF04CA687F14A6
-:1033E000F7627F001432E2E1E992963771FF92D7DB
-:1033F0005B355EFF85956E8BBA3B28CE63F66BC955
-:10340000DF98A1D37EDBE9675A3197BB897E9CDECA
-:1034100093DBF546676572D5D66E58D73696B99365
-:10342000F23295FA87B16C180AE56BE10736906EB7
-:10343000EE9C0D306463BBFA47BB51BF186E1F7E14
-:10344000DFE0B3F4A5DCDF59C37CCEC90979444B76
-:1034500007D08C9018CFE5F13581BDF4A38C2CC238
-:10346000E35A9F19D7D9593102FADF79E548BAFFF3
-:1034700013BA170682F2E44E99EACD38D02B83199D
-:10348000E5E903FFCEAA86F1278AF141DF69B74358
-:10349000FB05C21E2B97BDD4FEAE7CDE7EB271AAA8
-:1034A0000ECBC5DD2E15EF993179837C0BC66FD11C
-:1034B0002E81F6773D1B29F3407DFA118004C77BEE
-:1034C000D745710C0DFE21FF4EE86C277C669C7081
-:1034D000D9E21BE920E16216FBC5955466F2927EA3
-:1034E000A9E493F9EC110F9A21E211D7B0BFFB0ABE
-:1034F000ECAD336CC3565CA37B54E8C5DDAC677F91
-:1035000033DEF0FBF19A7706ECE348A74EFECBBE24
-:103510000AC035ECD3BED6D699D720DE772A14DF81
-:103520003DBA3E83F669FFBDCA2E8C2B1D053EE5D4
-:10353000F1F3B52B915EF7679A6516C3F8DCFEF8D8
-:10354000F70A07F07A515667043E40DF78FF40D112
-:10355000DE68E5F56699DDB512F337F60FE6E51995
-:10356000337EBA07DB63C637F9D76B8F7B53C9CF7E
-:10357000513355DB3D8F5945B7723A3E473F90F77F
-:10358000D7CC18D8B35F5A35F7B3F62F0110C7223E
-:103590009EF4C21930FEBEAEDBB68E81A9C64F596D
-:1035A000DF41727440F79A54723F3483DBCBB1929F
-:1035B00028F95DE0CB73BF972907318F751653C784
-:1035C000A17FBF63EA33FF710DCCF36AF1A871727A
-:1035D0000ABEBE61C688A475BD2E2F47B9F4D1FBC3
-:1035E000F353C981E64ABDC2BE1E7E4EDAB45321F2
-:1035F000FCD7FDC7278F60FE43AC6427C5F1F6FDFD
-:10360000C1C1D06FD93786DBFF78534FCEE913F8AD
-:103610005A27A6A03B806F492AF846CF643C4F74D6
-:10362000BCB614EB93E15531DE0DF08299154039AB
-:1036300092F6DBEF77605C735FB783822B674EB4E3
-:10364000C948822D5D234AD16C9D56754C46922AFD
-:10365000F1DDBB198F80F50DB28DFF2676A5DBCA93
-:1036600037D40FB09517D70D49F023C3FB4057D877
-:10367000CA6EFFD5B6729015DACAF3AB26DBC62B3D
-:10368000F3856DE5E9FE99B6F695EA3C5B7966FE51
-:10369000625BFBEA40ADAD3E523056C1AB7C409719
-:1036A000CD88AF8C4E8DF87C4BD76D3EA48B58499E
-:1036B00084FCEA23991DB918B77EA597EFCB75CC8A
-:1036C00090857E07D308E524E8F38DD989F6C111EA
-:1036D000DDB6B8FCCF67707DFD84A0EF73DF87E3B4
-:1036E000FAF97CEFC125EBE1D957DD4672A965BE39
-:1036F0001CC57B554DF96F78F1FED82BF3793CA1B1
-:103700002517D6E9A5BC0CE2AF17175C3714CFD745
-:10371000D2F3F50128FF4DFD1DCE8FB2E3509FEE91
-:103720008BB22BF09E19946BC57DB370017F3F5A0D
-:10373000BC5F854FD0DBE5167C25EBE3A067EC4B47
-:10374000E036B0A97FF2D177FCE617F0B84FE9E98F
-:103750006829DEAB9EA9BD70905F9FE6F2E7D59227
-:10376000DFE5F4A2B7FFDDCE0FAF133FEC3B31F73F
-:10377000ACF2FF370D3CCEFE548387C5607DEF363B
-:10378000F8E8F99F0D7E7AFF7A834ACFE6867C7A45
-:10379000C61A0254FF6643113D0F3668F47CB9A186
-:1037A000829E871A22D4EE570D35F43CDCA0D3FB61
-:1037B000F76770BEBC54E0D1F2CDB842E44587440F
-:1037C000789D8F29BB933ED464AB7C07BCFE76C644
-:1037D000849E78BD583D122B691F12E17A2B251F5C
-:1037E00039679AF76EB99D3C4B27991F87CF857132
-:1037F000BA9C449CCE8D264D7F82F32F7D09E77EB7
-:1038000011C7D99FCD6A9EE0FED42689F48D6F2C16
-:1038100097E7F7474224CF078E4D2DCFF37AC8F3B1
-:1038200065A4B7D8218C9F627A110AE395387FEAA4
-:10383000B888D12FEFAC78A0734B130F96FD1A3ECA
-:1038400033051F9C0B0FC9EB9F56AC8D9E3981DF52
-:103850004771F6EFA94746777FA1616CEAE9020E4E
-:10386000EF8EF7E7F6437BC58D4129F2DFC1702B60
-:10387000C2FD66665EC19EBADC9EE3FCA6A49DF412
-:10388000FA5D713BE701B26392DBC1CF41C203EA4B
-:103890002D0B1E52C881693353D04199FC6CF746F9
-:1038A000E8BFBF9B51DC4C459B1AE07F46E1DF6BD4
-:1038B000D8FFA183F07CC623917C74AFBBDD83313C
-:1038C000EEA7BFC7DB19D512DD63C838B04F453B43
-:1038D00035D8AD0FC0EF8E15C52A9DF89DD0D09478
-:1038E000B181340B1D8414BB9E444B35AE77282820
-:1038F000D63FA97C79A2BD8CFB3F2251CEA3FBD73A
-:103900008B705D734FD533B540C459BD29F1B45A9E
-:10391000B2C4DD1416D83A318FECCE8397E3F9CDDB
-:1039200028169589AE0CF2BF4D78656F84EEE79945
-:103930007EFAE792B60AE7EB317E9D46E76FCCE16F
-:10394000A0F3B7F585FA2D33E99C3EE97CC6F7F282
-:103950009F25D0695B1D2C86F68591E522FC25EF1D
-:10396000D7B8A2CADBB1BFFF6BFBF53B25EBF70273
-:1039700046ABD3C89F3A03FE14DE476952F83D298F
-:10398000E3DDCCE81E0292E5A3DD76A77C7500F7A7
-:10399000FF4719FF48FED15A5824FA5FDB851CBE49
-:1039A00007E5303CB73BB9BFD5DCE8F6B5E5A0BFCD
-:1039B00095653840717D96362CCA609DAD33B93E11
-:1039C00077B31BFA45C69C057EE19F38E3FB9EEB6F
-:1039D000237F4394BD2EDDF109FA7547E428C6DD47
-:1039E000B68D7DB06639E26FAC879F7F2A31750E48
-:1039F0001A683E83E558EEF1CB4C398971DAAD6037
-:103A0000CCE039EFDDE21E6E66C061B377FA15D9FE
-:103A1000EDB59FF411DC2E9444E8B7E6B8A2988F78
-:103A2000A3A2DC02B8B7FA1DC45F9B542E1F3679DF
-:103A3000358F2FC5FE6E417CBB7B9F5FCEDBE4C321
-:103A4000B8F74EAF83F877ABAA6CCB83F2562F371B
-:103A50006A9B544745AAFCAEEE99DCBE8226699467
-:103A60000F159C4BF64E6FF3B4887D37CBE905BA42
-:103A7000467CA60622B89E266F8E84FB62D6EF9FF8
-:103A800029097DC5E3CADB84FD949EDF1EC3B84EC1
-:103A9000F3E05585882E0FD84327E1BDA7A09DEC04
-:103AA00027EFE52E3D15BC27C478DB9C810AC4E7CF
-:103AB000B64C0733007FDBF27A39DF12FAB2491DC8
-:103AC0001721FA067C8C927AB67B5EECF366E74EA1
-:103AD0003FDE5BDB366A21E5856D1BCAE5F3EAC391
-:103AE000BFDED388FE83FA5DF609F24D8E42FBA657
-:103AF000B28007F55CB34FF1615C607CCE1D9EA087
-:103B000045CE25F38973F0DC1ABC4F78A6283D809A
-:103B1000482F930FD377459A032077F3306FA9DEB0
-:103B200067FD5E00D8DD9F21FF9F8B4E55A67B1061
-:103B3000BF303ED1516FFB970C8F1725D3B8B3B46C
-:103B4000CFD66B527DC7645415C7AB4937CE73D0FF
-:103B5000CDB9E0B7E9C5DC845E1C5875D92A3C7F35
-:103B6000BE9BF1FACB0EFF8EFCF4E4F2D7E5CF2634
-:103B70006527C9EDA6912EA2A7E4FEDBF2383CEF43
-:103B8000CC3C29E20431E2DF6C0F8F37DD53D43FA8
-:103B90002D955C2E1BAF8FA9B2D81BD9A5EDA46FB4
-:103BA0005D558CC76BD5886F248CE3ED94814601FD
-:103BB000DF8E2FFE744CBD783C2A3BEB5904C6CBFC
-:103BC000EA94893EF1E70B9083FD841CDC32FC8F84
-:103BD0000CF347765CA10478DECA4781B3E993AC65
-:103BE00029F678D285C68BAAAA441E431A4BE379DC
-:103BF00043552185F2751C5CCF6AF0DF2021222419
-:103C0000B1FF83C451948AAF789C2C670923B919FA
-:103C1000CF5FC1EFCFE0383A237B042FD062BBCB1C
-:103C200057737B2B97754B781E381CB37864A47739
-:103C30002E3FCFB05C07E5EFC034987F22190ED23B
-:103C40008B3F1C7E540AC2DB7B8A578D457C24AF98
-:103C5000636595887BC5D771763C9870F6359D9ADB
-:103C6000FABBC9C3F5B1068A3B0D8DE5A4F8679987
-:103C7000BC81EB63C3ED437DDDA4D43F8E65E81DBD
-:103C8000A1786952FCF3B3341E1F95EE603EA998EB
-:103C9000E29FF9B84F6B597A00E393FD14DD83F589
-:103CA000192315FABB0C60774FC4F396845FAE7A84
-:103CB00079BEDC5ACA2B7C1EF51AB43BF0C5D9E597
-:103CC000D193E7D06B2D9D23BD145FF7D466A03F41
-:103CD000FE947FC461F46FCE7878BE97D9EE40D25F
-:103CE000F74F9A859C3B5C25E2E8699FC9D87F9A8B
-:103CF0005F5530AF2EE4194BF2BD494A7D5ED05975
-:103D0000C5F5C168F5354E67ABCDEF96AD26F9FF29
-:103D10004EA6A0DF3A7D31C59585BDC7344DF55D12
-:103D20009BB0F34C7DE9577CC6CD388EC8B7EAB15D
-:103D3000CE033731FC1E0BF35BE2B32370FE7EF142
-:103D40003C3BE2E724FBAE377CB608FFB8C91FA2B4
-:103D50003C8D3328B3529C9F984FB0530FA29C9A2E
-:103D6000D061972F19F976F9B2D5514F795FC6D541
-:103D7000CC877921AC2AE0B7DAC960AFFEB28ACE2F
-:103D800077ED76E74DD58C7F673B5B55304E13F66C
-:103D900004199E4B28B93AC3FD70F90367DD8FB64D
-:103DA0002AAEF79BF39747D0AFD931F53B8497F113
-:103DB000153C0FD56C07FAF29D2A8B7F63E6299C90
-:103DC000F7F7947C0ECA5F3CDF3852CB9495FC7BAE
-:103DD0004AFEE5F43DA5A73CFC7B4A0732F50CB44E
-:103DE000BF2EF47B4ACBAB39BD863CDF7E71DA084F
-:103DF0000B9EBA74CA1F71F94FD1F9CD34916F92ED
-:103E00001C2F72BBEBE9BC2D5652BFD81A2F36F1CE
-:103E1000D726F4F66F4A74CA0BEAEDEF4198ED101D
-:103E200063B82EB788876E29594FF89F5B914DF183
-:103E30002845C4A35CA774CA038E8ED733AA2DF875
-:103E400077E71AA4EF32FE91F1FBEE9FF3FBEE1938
-:103E50001B5908EFB787BE1847E754A1581AF1D984
-:103E6000D4D301FA5E7599FCD8D611507FA053A126
-:103E7000EFC81F989A9E837AEDD34E6EDF661CB80A
-:103E8000EAF0DF41B9A4B316630220770096FE3D45
-:103E9000D731F5B4E36BF99913D0CFB49C9798E37D
-:103EA000FEBCE110D1C7930D1DF4DCD710A3674B06
-:103EB00043173D8B142D8CEB29EAA0B34B36E90454
-:103EC000D45BE0287A17FA5BE8C1375E1F5F4DFCD0
-:103ED000D7616B9791DF656B077E6E11B653FC1C43
-:103EE0009F2EFCCE188C3FBB8B6D96D4FF51F26A8F
-:103EF0005175DFC8AB1BAB079E4D5EF1F3D45097F5
-:103F0000F8AE58123FFE5795CABF8F64F2A53857D6
-:103F100035F5F456FC15F46953D677B87C8BE76F0A
-:103F2000F0FB8AE677E9EF78E5E45ECCEB697E5B4F
-:103F3000D41B9FEFC5F3DCC4DFCDF8E32ABC77F2D6
-:103F4000023AB76087BEFBCAB3ABF0FB410B6BB262
-:103F5000150DE00BE3016C76E2BE8C99D7988CB717
-:103F6000DF543BCCEFD0511CBE7904FFFB06C9EDFA
-:103F70005EAC167E9B6AFFBB1FE9BDDC137AAE9A6E
-:103F8000CB8B5F0ABC6D75F13C85DEEE837CBFFA9E
-:103F9000ECF741DE14F5E7BAFFF113D1EE0931EF8A
-:103FA000B04991FB51FE987F97E349F13EFEF73807
-:103FB000FC2CE5386D42EE5E3ECB27F653A3EF9F17
-:103FC000C1788F107D88BF9F60D64FFA305EFF4F5B
-:103FD000541FFF3B093AC589CCFB786DD51D7B1B6F
-:103FE0002DDFFF6A8E7F5791E739FD51E02DF9698A
-:103FF000DE47897F3F8A1DDEAB59BE1FF540F59B2A
-:1040000027C5F7AD9EA6F58A7B38DB70BD03E9FDB9
-:104010007E7A9FF43D81A75E39B8577C47F179825B
-:10402000BB3EF93B5DEFEEB57E1F615BF53BAB44FC
-:10403000FB97683CF15DAF147421E8F6E85EBC1FA5
-:104040007A1EE3BD46E389EF72ADABE67CD41B3D3F
-:1040500043FB23046FFC7BC5B51ED42B897BFF4734
-:10406000083FE781AFA334AF6ECECBF125BB39BF9C
-:1040700098F964265DB0597C3F3656C7F3744F12E9
-:104080001C2BFA0C0FA7089EA47B48E75AC7E385B0
-:1040900091CF080E7F3C1FF94F34CED784C7BC3F69
-:1040A00096CC1FFD6649661EB46B16CE931BFF6E41
-:1040B000A77B561FCC0BE366D33889EF81F69F951B
-:1040C0005AFE5CD0B84C3DBFFC12B3FCFF0015C8D3
-:1040D0004EA0007100000000000000000000000081
-:1040E0001F8B080000000000000BF3176060F85100
-:1040F0008FC09C687C5AE3BF4C0C0CFACC0C0C971C
-:10410000D818189C39191884F8C833E7229ABE7B4E
-:1041100040B366F030302C636560D809C47A5CD84F
-:10412000F5D90822D847817E5F01C417E91C06A390
-:1041300078F0E01A11068649A208BE9E18AA7CAD46
-:104140000882AD2345995D4E40FD008850BECB806E
-:1041500003000000000000001F8B080000000000AA
-:10416000000BD57D0D7854D5B5E83A3367CEFC26E3
-:104170003949069884104F42C0A84007080A1675AE
-:1041800012C146E5B663DA6A6CA91DAC527F61B410
-:1041900056B956CC4908C92484101015A9CAE02F75
-:1041A0005A6D53456B9FE5DE09508ABDBE277AD50F
-:1041B000AAD5DE5829AD566DBC9692BE8770F75AC7
-:1041C0007B9FCC39273393A14ADB875FBBB3CFFEFC
-:1041D0005B7BFDEDB5D75E7B8FE27041F509004753
-:1041E000F1DF5900F7FB01605C3A9DF9BD2F5FFDDF
-:1041F000781DFBDBEF0E3FC89299BF985F119B962D
-:10420000AE3F0724AAD7F08BC57F0456EFDFC1A9C4
-:10421000B9D9A79D0543FE30CBEB9213B09D1BEAA5
-:104220004BFF25C8CA871DE16E964F1D760480F5A9
-:1042300033039CD80968A006A2D3D977F9CB45608F
-:10424000EADF9E9EB949865429C0AE95204759BDE4
-:10425000D505A72D1E0C00BCD092FACBFE290091EB
-:10426000D449B2C6FAD9DDB297F2FFD6B2EF2FFB2E
-:104270005D003128A6711AE67F242F61ED76B9A082
-:10428000B99FB56B8848AE25A6F162623EBBBCA261
-:104290005CAD97339617B072F6BD217841C6F2181F
-:1042A0009B11D52B16FD0C0F3AB19E06437E9AE763
-:1042B000E1A68CF39C20DA19F9BA413EDF9D6F1D0F
-:1042C0003A1FE99082A2A81BD3C3D56F22BE073C38
-:1042D0009206550CBF83E7117E53885FD6C5A1B700
-:1042E00039BE777DE208B7327C3778D44098E54113
-:1042F00066F460E50D0188105C324B191CE70BB8C1
-:104300002F166913A644178DE832E06174098C0DED
-:10431000EF599B1482D798E700CE338F76065DD98C
-:10432000D740B480B583CC7C301A3F6CBCD9C70E63
-:10433000A781D7E8FC81BFECF700FD3BCAFEB75070
-:104340007DEE2FFB6BD3F9B386F759F28CA3C173C3
-:104350002A8317FFD43095FF3C689457F1721C27CD
-:10436000D1A2FDB986F15F5F0BFCB986F15F6F8B5F
-:1043700087F23D2D2AE5BB5B42944FC8AC09A3638D
-:10438000A207923A6B5F1C61F54DE315CD65ED4CCC
-:10439000F01584554BDE5F1BB2D4F76A9AA53CA199
-:1043A0005DEF4832BA774D73249D12C2C164E44474
-:1043B00084C3432903F7D5109B4F0D6F026B5DDA61
-:1043C000AFAA119E179DD0C6F2855AC47129CB574A
-:1043D000869C900CB3F10B8700587F8995001B5881
-:1043E0007F3D334F755CCAF2DDF3DCAA530548B25A
-:1043F000FE136ED6CF9194B60AFB99AE84B11FE836
-:10440000937F8B78F2B0FF8E56034CD694B71D8500
-:1044100000553AFB6E9E9F5B0FA15C17CDB57E9F4A
-:10442000AC2DBD1658FDC960FA5E95A6A731AE91B8
-:10443000B78F671FE78415B6FE6DFD566A83F5EAF0
-:10444000B474BF27C050AB1AF867EE37D220219D55
-:10445000C2A025671E3FB8032B3E2EDE3F3B8DE7F3
-:104460001E17D78376791B0407E90F90C74184C1D3
-:10447000A5698E6437EBA7BBCA41FCA3AD8624EACD
-:10448000ADB593F6C531DF5DA5686D2C5F55BBA753
-:10449000599A01B066924A7CD7BDC30D6D610E4733
-:1044A00090F169A5C1A74706EBAB910F25086F6096
-:1044B000E555DA8156ACAFBEEAD35C7347CF0F56F1
-:1044C000F0F9539ECD7F08FF9833BADF5FCE5122BB
-:1044D00051E45B1D926E064F574D5BA3CEC6B95794
-:1044E0009701E5A77B65FF6B88E7C4140EAF7DDEFF
-:1044F000959AB204F91ACCE3B3F12A6B2EBC1AE7F1
-:104500006587C3D017DF6F51491EEF6AA9A5F4DE96
-:1045100016B51FF5C45D9F3833E2F77C89EBE7CD14
-:10452000AEA803E1D3E739920F92FE896DBE92E502
-:10453000EFF9EEF859B80E5C3FCF41FAE5CF3D1CDC
-:10454000DFF7487D1703D55734AA6F93FF7BE54803
-:10455000DBB758FD7B42A5A03379AE74ED3BF74441
-:10456000EC6F45F54C9DF577CF0D1BDEC6F695F348
-:10457000A66A4ED67EF2DC036FB2451CEE3A3218C4
-:104580008A0630CFE5BA72C5F8FE1AC62713B5BE43
-:10459000EB70FCCAB98A96AC4AF3650584699C1332
-:1045A0009AFD9052C7E6CF8A6B72F3E7F1D3037F8F
-:1045B0001FB92A47B92A4DC3BD59D82776BA2F92B9
-:1045C0001CC42F23723597CBD513A7733A1B727572
-:1045D000D7A4BE778B58BEF71B9C4FED7C5E35F79A
-:1045E000403DD2B587C94F4908A0CCAD7D2CB17CE8
-:1045F000EF122187730F484B59FB3FBDE2D300E513
-:104600006971667D9D8D9FD3A975DC7B6F70344485
-:1046100059BD5F5E3EF58F6E1C6FB1A2A19CF5CABD
-:10462000B534BEF65D45D34DF4AC5CCCE489F157AE
-:10463000E50D427E6C7235D6F8899624BCC3E468D9
-:104640007D4B08228C6EEB5A3492AFB542CED01619
-:10465000853296177206B5B3289FCDFE046825B93A
-:10466000F368298831FAAC677D43397E4F4522F3E0
-:10467000014A50579D4EE0A41C6C6D5F37520E11DD
-:10468000C6F4D02B89BCFE473DC2C653C33CFF6C69
-:10469000EB1FF5554C08D77B797E87545BAFCF373E
-:1046A000B7DF43FD1BF5593ED55063EA0FFB9F660C
-:1046B00086C7518FF58DFE5E6F2DAFD7D9F8EB44CD
-:1046C0005E692BE6F9E3DC7F8FD41F624C0F6B6CC5
-:1046D000FDF448024FFA7F442281F438774AEF46CE
-:1046E000744BF91F228827A3FC07ADFFA1EBACFE9A
-:1046F0004710BD4B627498B520560E8CEEFEC61462
-:10470000A029B5DE86EFF4FC5EA4F905A6F1FC7DD8
-:10471000AD9F4410DF46F9D352412BE21BF92630FE
-:104720001E20444202B0E9E73D573E8F7FD79600F6
-:10473000CC63E3687DA0B13E1C357109F71DA1C5AE
-:10474000F2018B3C08BE63F03D2EB174D6FCD8D785
-:104750007029CC009F6E86CF187F2C780D38B2F36D
-:10476000271FDFCE470DE7CC7D613E932FFF3E57DD
-:10477000D8ADE13C5409F5780902C5F45AF1915DD0
-:10478000442790FB436847DBFB2D59500E49D33C2F
-:104790003F6B7ADE85798EB797CD7465F957CD7802
-:1047A0007C1CEBCD19CD77C6FCBC383F403B98CD87
-:1047B000AFCE3CBF279B717ED9F0669FDF3A6F5F1B
-:1047C000733483FE3DD321F6BB67CEFD12F6CFC610
-:1047D00003D45F5E6D88F4AF8AE3B1AD66D1915DBD
-:1047E000CDB8B5CD369E3A9F8D577BFCF039161F5C
-:1047F0000798FED2583D4738371FDBE5D998B71FD9
-:10480000E72D211FF1FD807DDE008C8F0AFEFF9DCC
-:10481000F7C732A7E70DAC7F9DCF8BCBC73F685E54
-:104820001F3F5F4AF28AF038393F8732F1D73B9217
-:1048300066D9E7DAF93ADBBCFE517C3A7A5EB9F127
-:104840007CBCF550BEFAB5ED551FE1B1F732BE4F55
-:10485000E8DDBB90FC0EBDCF9F3D01E1284C9C02E2
-:104860001166FF4EC5FE597FBD867DB1A96E8CFED7
-:10487000B97D71670BF4B74F0178AA7090F6C30C3D
-:104880004E6ABF99D99F49A6E0EA5EBCC1BB848D40
-:10489000B7F98A0D5EF42BF50A7BB1EEC507D69FFA
-:1048A000C3F039E1F292994EC60ABD5EE3FBF6E72A
-:1048B000A6B2EF9B2E13DF85FF8A7D7F11EB874425
-:1048C000FD6C70952983B128C90B83CB847FA3FC31
-:1048D0004907B74B9F403BEB44DCCF703BABCCD799
-:1048E000B704E95BB859D1EE9346F7FBBF853EBDEF
-:1048F00013ED3436DFBB2EEF2847BB6AE7D653777C
-:104900000510AECB80F4F989C987065C1A8EAF4BCF
-:1049100088E7275C60D859B4CE975F66D0B5493A2E
-:10492000BB86DA093B8BE7BF3FB2AE7E9DEC968A31
-:1049300018CF3FDDF6DDFA55B2A95CFF767DA422E3
-:104940005DFE42DBB5F5B8EECEF2C4DE98CF483757
-:104950008BE9BD550C8E59B2E68C23BF6C0A66B448
-:1049600017B73DE7694E32FC6EDB3A75F2E519D6B2
-:10497000114645A2B3919FBDD72A674F20FEDC8820
-:10498000476EB7F630F462FD504C5B85F89CBD175E
-:10499000C2B81FCDA6EFB2D13174B755DFCD92ADFD
-:1049A000F33A5EF3F90854BEDF16FDB375FD250733
-:1049B0009F8F13E568B6CCE5FFD3CE278578E276E6
-:1049C000C46F32F5FFF79AEFAC001B27F8D98F13AD
-:1049D000B28D93AD5FBBBED21B4092D11F5F0E6103
-:1049E00084A778411CD08FEF0CEC0BE9CCDE93D57B
-:1049F000414A5DC1A190CEF4AE12D2CA307557843F
-:104A0000CBF03BDB1F09F9E86C25BD3A92EF6A4514
-:104A10003DBA0EF3247F6BA87CC3487E2DE56F9BC7
-:104A2000C4E5F304E7ED03A887AB51D930B8D60E3F
-:104A3000BCDE8C7E80D2DD81309A1AA58130A01E2A
-:104A400036CA7B07DE0D79D08EDB1D002FE3F7120F
-:104A50003502E6F6EB06FE1A525979409407825168
-:104A60004BF9868193CA420C453E51EE0BC5A8FC1A
-:104A7000B68179651ADA31BB032A7EF757C469DC3F
-:104A8000B37F718D83FCB18B1C49B7495F2516CD6F
-:104A900022FDBE588A9DE464F4A8FF458F07ED8788
-:104AA000C4EE6913F03BD93CE44F92FF2FEE47313F
-:104AB0007B94ECA0807AE014412F679A1E3D785ECB
-:104AC000417E607E4E9110E7147A432A85E3EB85A0
-:104AD0009C4E8CA3D3FE676ABF37EDAFA6FC3E4B5E
-:104AE000BE404D46701F2D07997E60EDFD113D8241
-:104AF00074572A78DE1908A7507F6CFA0684116C67
-:104B000099E113EBAF9BC7F21AD23F4AEDBBE6F037
-:104B1000BC128AE9984FCCE47977453C85F9352772
-:104B2000F1FC2683CEF088950FE04F44F7AE91BCA0
-:104B3000B70DCB1306DF80BF0DCBD79CC1F56CB989
-:104B40005CBF13F1BF69A0AB6C29EBBF08F981F51D
-:104B50005FB4384CF432E872A7E6A0F5D6A0CB9D3E
-:104B6000DA2C3A279859C4304113D2881E334FB8F3
-:104B7000DEA1E279C7298EE483129E4FF5780759AA
-:104B8000BD4DB5B3A8BC52760AFF00F7873F28FC9D
-:104B900001D5CCBA40BBE341B15EEFBC7D6A11B632
-:104BA000DBB9F97F11BDCF741653BB35B5FCFCE6FC
-:104BB00019B64EA39FEEE9160FA53F62FDC598BE3C
-:104BC0007EBCC543E90F5A544A1F617A1CD31E5656
-:104BD0009E42BF032B4FB17CFFA0A311E5FFF61649
-:104BE000669AB1F6B7B5783E96A7A0BF42A5FCBAC3
-:104BF0009610E5BFED685AE1E4FE14FF3436AFA726
-:104C00005EAA21FF5EF875473489F356A174515DA1
-:104C1000FABB819F6F3B1A5622BFFE7050A67140AF
-:104C20001EEC3E2573BD36AC37E37599F7171CDCD7
-:104C3000707E3063BD4EACF7D87E0E377852BE2CF6
-:104C4000FDF520BCD3DE12F085522559FA5B8FF5B5
-:104C50001EDD2FE00B24BB4FCE5CEF0E1CF7E4B73C
-:104C6000047C15C90DE7651EF7FBD89FA784DB2BD5
-:104C70009F437F461DAD035B25933C6F5CA24B0EAB
-:104C800046674FE9601CEB4DAF8B4BD56CFCE025C4
-:104C900071C9319DDB190E96F7623F2C3DA59695A3
-:104CA000B37A1BB1BCC0548EED597AD2345E1EFC6F
-:104CB000A6B57C446F378361A7A6D0D91AFA8A3586
-:104CC0003FD5C1F5E3B3CEDFD623BF4F5578F97F8B
-:104CD000631EEDAE45B6FA3E9EFFAD51BF90B7776D
-:104CE000C83CEF29E1F32EDCEC49A2DDB57E61473B
-:104CF000E8D2407ABEC5E7246A316FCC6FFD399B9C
-:104D000043979AE653FC85BB6B2F9D967D5DF16AB8
-:104D10000E8898D6DDA97DD32052FACFAF5FBE6A48
-:104D20005A37705D9920D6850973F9BAC2F0A67317
-:104D30007B95E36DDD1956BC159D69C5DBBA33ADB6
-:104D4000782B3A2B37DE7E29C6CF863F367EC43C91
-:104D5000FE8673ADE3979C671D7FC379D6F14BCE7A
-:104D6000FFD4E3A7CC7CD3576F1D5F6DB08EDFD728
-:104D7000601D5F3DFBD38D6FD0A76BE02EEBBA5E5D
-:104D8000170533FD12035D21CBBA1EE6EBBA51BE07
-:104D900066E0A7215CDFBDB8BEA37FA696AFEF3368
-:104DA000DFF928847EFB7567EC09E13E631DABBB30
-:104DB0006F5A7ADDD879C68D8E4759BFDF3989AFF2
-:104DC0003303673CED41FDBFA696AF3309719EDB0F
-:104DD000DD923A788D2B3DAF828497F67B467EC478
-:104DE0005E82DFD5231F266A1DC25E2A6B8B305B75
-:104DF000D473926CC9774DE3E537B797B5E9E84BC3
-:104E000091F5325C87FCB5F0E76919F65BC6F806E8
-:104E10003CD9C7E7FBE2F4F8936DE34FB68C6FE43F
-:104E2000BDD379B92ED734203C9BC4BEF906F9779F
-:104E3000A45F8E1F7CD3DB223566F8783E0D1FCF32
-:104E40001BF0DD2ACF68D06BFE9EF09D66C3DF6944
-:104E500036FC9D66C1DF0A79EE31E1CF5EAFC7C691
-:104E60009F5743E426791CCA1190BD199755711EAE
-:104E7000C4FBAB93857CE1F818B7B344494EA9E273
-:104E8000E54D6C5D5B2C8B7D98A8DF68CB1BF62B0A
-:104E90002E4747C90F93D97E5580EB6D6677841FE7
-:104EA00024BD1E26794AEF3BB81F4396A39168069E
-:104EB0007D7087CCCF872535DC8C70CA0185FCA836
-:104EC000D9EAF7C992B0AF75CBF94E110CA59C0881
-:104ED0004708283E090E7F59BB60FA683814391A12
-:104EE000C3719CAA02F7B171DA8B2FD4CC714C8FAD
-:104EF00018F08422048FA2727814391CC9E407BE0A
-:104F00004FE67E0BA31F06A1683F0468271AF0AD89
-:104F1000F6469B97A03D5FAC109EDA0BACE7E5BF71
-:104F200011F37A41A4ED59CEFD00A331307E69FC26
-:104F30005CB24357CD6DF0205F6A10F6A0BFBE3D56
-:104F400090399EC848ED766782D9A598EF6076299A
-:104F5000A6ED81271A71DD39887C9CE15C7B44CF0A
-:104F6000851D9032ED3FFDB53E4859FCA74982D3DF
-:104F7000AB9558BEBB43E59676AEF132D9F3ED0161
-:104F80004712438DC682BF43C06FD4EB94E31E35F6
-:104F90008FFDB23B6485F7F8E18FB7F7BBFAD54CCC
-:104FA000707D567833F8CADEBF52AAC4C92E96A3C4
-:104FB0002133FF3B5D9C4F95524F9CDBEBD9CA7D63
-:104FC000BC7D8095A35D1C886A78FEC2449EE2C4C5
-:104FD0003C280726FC4C14EDDA5DE23C1AE2E4AF13
-:104FE00095B47833F291A742A1F3017B3B23F58975
-:104FF000F69D9F7CE735928F711E920F4963F29365
-:10500000619CC7E4C878174B37C9910998BA8E38A4
-:105010006399E4649C8BCBB1271AD53C3CD4242300
-:10502000FCB345BF7D06FC7A9CCEBDF285BF3A4FEE
-:10503000F867A7E19FE19A43F07F0ED36CF04F171A
-:10504000F094427800F7EDC8A0D82FC0059AF95C1B
-:10505000AE57F45B2AE003B88EE8669477093CE427
-:105060003B9FF979CEA7373D9F46319F7373CDE7BC
-:105070000B623EBD2EBE5E791AA35A88F1554916C1
-:10508000BA2C15FD6F1EA1CB75C7C4575FCD731E1B
-:105090004BD3F35822F8EAD25CF3880978FA9C30B3
-:1050A0006F3FC6CF4C16EB0D3459E8B2C5E02B3735
-:1050B0005F3700AEB7D0E576D14FBEF3599EE77C9F
-:1050C000B6A4E7F33D41975B72CDC754BF55D46F8B
-:1050D00013724576CB16D78E36B43F1E93A31DAE02
-:1050E00039E9F158BD4E73BD89ABBB8D7A6BF0BB0E
-:1050F000B468A45E8F185FD845F7D37E6C35DA1894
-:10510000CCBEF9E2EA171AD01E67ED3650FF51BE49
-:105110006EB276B799FB9FBDFA8E3651EF4EACD783
-:105120007AF611A3FF4DE6FEB7B852061C77131CA2
-:105130008D23FDDD63AEB7D4D5DFC6CF092BD403F5
-:105140007E935D13CAEFDCC7158C2506D15F090578
-:105150007D687774C8F12D83C80FCCC87B907DBF64
-:10516000C91D9124B67EAA91F8C358AF4477AB4EBF
-:10517000A45B43FC4798D71D10C5B8C83BFDB76E6C
-:10518000C1FC0AD9A3BAC3686F697434D41B9429CB
-:105190009E67B514D3715D3C24C79E7191DDC3BA7F
-:1051A00064E3DC54AA25BB25F4DF82C4ED0E0ED7E0
-:1051B0007AFF250984C3CDE0C2F8E0D536B8D878A7
-:1051C000B42FEF1AC7E36D40865A19FB73FAC2D8A1
-:1051D000DFC0B81B09DE44AB5BC5F689293712BCBA
-:1051E000AC2C4AF179AE38C1DBE9F2A8188F77A769
-:1051F0007FD9268CB75BA117517D8203E73FB99A0F
-:10520000E0F7423CB5A40AD5575FC481F02C522880
-:105210002E3911DC40FBDBEE456C9163E376D76EF3
-:10522000D0B1DDC1453E8AAFF306FA00E3AD4ACF07
-:105230005700E380BCC13EB2334BCEF3F17C05D0C6
-:1052400038259FE7F1B22E1854AB595A9AE071C72E
-:10525000DDB54DFA12B463E6F27854D0232F617CA9
-:105260005B31887FCE8A01ECDF35D109CE709ABEE2
-:10527000A57D23ED8B6219E465A45E32CF7AA9FC8B
-:10528000EA9524E4FCEAF5E5592F9967BD14AFE7E8
-:10529000860B8A32C57B8CF0FD0285EC0F23BEADF8
-:1052A0009059FE23F64915B7DBCDF68A0B94B4BDB1
-:1052B000827CE65C9C138E156FB606779BEC9BA0F8
-:1052C0005210A4FDC669701AC9E518ED0FB5E8C102
-:1052D000DDAEB1E78B129632F9C9C7AABF06ED3D24
-:1052E00077F672FF8C0B43A4CFA67F4DA48B793A3F
-:1052F000937D9F8669B3C87F4DE4173747328C573B
-:10530000AF703D5C0BD19C74F00AF80FE0993F6BD5
-:10531000522BB3FA19CEC78D3430CD61B31BADFA21
-:10532000CE23EB0D74CE51CBE307DD288C283761FB
-:1053300020FDE282945A4DE78B91C225E3D3F2E33C
-:105340000A8D27F9F93F654E90E6127DC288473BEA
-:105350009FD8F92260E38B4FCB27171F273EF127F9
-:105360009C79C98FBF2FCF7AC93CEBA5F2AB174808
-:1053700048F9D5EBCBB35E32CF7A295E6FCDBF282B
-:10538000C2DF7AFE2AF4C3F8BFE8B1E4D77CD16764
-:105390002DFF52C092EF39D7DA3E709EB57DCF799E
-:1053A000D6F681F379FB273BBE7A36FA79F29593EC
-:1053B000DFFD8D7252EBC95DBF64D11872E5D16912
-:1053C0003FE99535480571FD62EB9444692499C124
-:1053D000BE7B4EC8FFF32EEEC749C83AED6BFFD92E
-:1053E000E7F90385FB8D8CF98E05AFA17F7FEF1464
-:1053F000F696DDFE1AF1EB1C3E7AF454D42380C1FC
-:10540000D2A06A6C6AE8C7055F184345BC357D7455
-:105410003E6DEFBF0BCFEBB8DF25D46482E33937A5
-:10542000F7ABFCBCAA2344E7B553EE08E13EBD6BE5
-:105430009294D1CF7244E1E782D5313FD9199D9A38
-:1054400087F461D7247E8FA9CBD547FEE3AE2A6BC4
-:105450007B8FB01F8E287CBCAE957140FB7FF5948E
-:105460003B9A715C77EA5F4163707F77529CE247B9
-:105470003BDC7C1FE08EE880EB8247D3E9FCDD0E4D
-:105480004FC2881B82BE509369DE4D6ECE373F6798
-:10549000F3C9675EEF280AD557231C7FD9F0B5E31F
-:1054A00018F175B99BF7AB85BC84AF837540EB09E8
-:1054B00012D2C9E84824D6F0FF06C1CC6FF6F51821
-:1054C000C027F8ED28E535F9E29CFCD425FC30EB4B
-:1054D000D00FC352EDEEAFE5E4E74EB19EBBE1EB7A
-:1054E000D4AF5B8B4750DFF96AFBE052C22F4460B8
-:1054F000BCE03B82B73DE2C0F30580F0666627FA68
-:10550000C675855339FC629E5AEB7A77ACEBD96C41
-:10551000375BCFFCE9F5EC20F49013768D03AEC831
-:1055200074FFC358CFB4E0C539E7DDD5C2FD5600DE
-:10553000B7403FCEE76527F1B3A306F4F58C5EEEE6
-:105540005A99E21CDC913E5CA4C15303296F61F6B9
-:1055500079BD2AF84E0BE51E77ADC0F71AA4D389A2
-:1055600039EC2C7434B37DD9AB9DF7AFC2FD5BF140
-:10557000022E07237C2FF759F87358E17E8D2EAF4A
-:10558000D64AF12C55DC3F62EFB75BC06997AB445C
-:1055900096FB3486DCFE55D1B81EF2F491DFC19043
-:1055A0002F4DFB57D2735D93DA3C88A784B681FCFC
-:1055B000C4076B14C07B30767D300287C0FF59D0A2
-:1055C000E3C1FB4ADD2F3BE9FEABBD9E17376526E5
-:1055D000BF9EBFD6AA7FC7D227777E4A7DF21343EC
-:1055E000EE47EB135A7F2FEF6CDF85F4E9F272FF81
-:1055F0007549A30E4B4CF3ED11E32F768B75A18209
-:10560000C3D1E552EBCD742A66DFEBCD7A330B7D47
-:10561000B2D1FD220C069C9386C33EBF87DCBC5EE4
-:10562000098E3F6D6C3C8CA603C7C32A77663EF893
-:10563000ACE6D3E6CE8F8FEF16F5EE167835E6356D
-:10564000969C18FDF70B7C152FB0E97D59B7D0DF7C
-:1056500069E0ADD156CF63AD67E04776737BC5583F
-:1056600027C6EAFF2D85F387BDFF6C72F89B1139C1
-:10567000D4C92F6B8CE3861F4448EE985EEE9E09DA
-:10568000501018247F01DBEBF378A76014CCE73AC5
-:1056900076FD65E8FF6CFAC8BE6F19ABBE12547296
-:1056A000DA49865D5322EE4D7A443CF00629F339FF
-:1056B000CFB09023A6D8F38AEBC33011DCB74114E6
-:1056C000C4FDBFC8402BCB8F0F2B5A37FA3FE48560
-:1056D000035B597EDCCFDCD01D4697CB82810186EF
-:1056E000AF35114F14CB2778AA46EE69F59D8A7E17
-:1056F0002D6E7781F396D7F01EF0F88B6440BCBA1C
-:10570000611EC5691F5CC174D8CCD1F08C9701268D
-:1057100096B054F807E8FC10B7945FB1AD8B8B4C92
-:1057200079F4037BACEB5EBEF3B6C393ADDD98F0CA
-:10573000A4F7A1FB717C37E45ED78E757E23766D6E
-:105740009EF332EEA319DFAB869DA0E1FDF66189E1
-:10575000D21386FD94560E7B299D345C0A1A235A77
-:10576000C57031A5138727D2F7F2E1324ACB8627DD
-:10577000531A1AAEA2B478F8144AD5E193285D2FD3
-:10578000E4B0687836E58DFB6F85C333295F30FC64
-:10579000794A03C3F378B9384F5DBF3206E8AF5694
-:1057A000701D62F2B17AE1525A97ECF35AEFE1EBD5
-:1057B0007087B827DC61D3DBFDA2FC510F97FBF5A6
-:1057C000422E408E83D96F7E8FA8B7BE3A46F677B9
-:1057D00087B11E962DB5AC87F6FA1D59EE273F6DA1
-:1057E000940B78A0B6690CFAF0F357773046F706B9
-:1057F0000062A497408E59F46E87017F9EF708D708
-:105800002F7C9AF8D8CB0419430BBD5FB8BBF901C4
-:10581000D43BE7DC78C56E26771FB863377970DC38
-:105820002F5C454CF7FD65378750BFAD5F7807DDCE
-:105830006F42F31BE39A3BCFB925FE00711DA3CB4A
-:10584000746A77ABC7740EDAB5F4E6E687587F5A08
-:10585000BB033413BF56DEE203CDACBF0E97966197
-:10586000FB8A1B4A2CDFCBAF29B7B433EE49842E19
-:10587000ABB6D453179C6CA957387F96B59D382783
-:105880000FD49D6E69E70E1878E5E7888CFE96F5D3
-:10589000A353CA4CC7B887EBCB6C7C73A187AF6BA3
-:1058A000E9FE73D32D5BFFF9DE0B49F347D6799000
-:1058B000BD1B4F2C5A80F6945B8DD13D9563AF7F15
-:1058C0007CE7916F3DBBBE2A447D558AFA44A234E1
-:1058D00080FAAA14F5889752A3DEB1DEB75D8BFA81
-:1058E0002660D2377398DC67E0878037B7BE3945CA
-:1058F000944FF1727DB356F0959D6F42A2DE5AD45B
-:1059000037D3C6D637216F6E7D33538CF78FD6379A
-:105910005DB3EE887D8BE5BCA7DDDD7C3F4B3B674F
-:10592000DE4879A62F642F2BEF3CF596F8FD263D37
-:105930000287FF93F3A5E087A2B956FD61F45F10DB
-:10594000B6E911431EFE46B93E22F8351B7DF67FAF
-:105950004AB93E729CE4FA88A77B019E2FE62BD7BA
-:10596000A3EB1FDF79E45B4F6F80D459B82F99EA1E
-:105970004BAE42BF9BA32FCCEFE5C5286EA7EB39FA
-:1059800097F0F370FFDF2C4FE43CE49F599EE82230
-:105990002F6B7F7D953601D76996FF227E37E5A371
-:1059A000B67C93ADFE576CF90B6DF59BCDE5094DBB
-:1059B0009B80E78B89BD2E3A1F4C688EC64CFC74C9
-:1059C000AE97F3CB5E4F3486FD9D983C7902D2852D
-:1059D000E52FA5FEBCBC3F96BFCC965F4AE3A7F37C
-:1059E00057D8CAAFB2955F63CB2F33D7EF3A32F9AE
-:1059F0004E7A7FE3972EC07B0976385F117AA273C7
-:105A0000CACDB1362E973761FBCEA9B7C42F05E2B8
-:105A10000BF2A33903B6FD1FE33333BFEC15FDFCD6
-:105A20007CD28DB46FEA64FB278A63443F5E06FC38
-:105A3000FCDA2BDEE1D2AEA4FB0F89B2EBC9CFD1E9
-:105A400059D146710A073585CE67135599DB1B7E00
-:105A5000A6CE8ACCE708BFC6205C933D0235DCFFAA
-:105A6000876270D481EF0971FDBEBAAA83F4AB924C
-:105A7000BA92FB37CA62E4DFB84FD04F09C4C9AF4E
-:105A8000E0AE8867DCD7778EE0C3EAD7DC69E04315
-:105A9000EC234DF820396CEBFA6037AEAF096F6636
-:105AA00039FBB197CB992B94DFF8A3E7CFD7872D9C
-:105AB00078A925C3BE36E1E271F2FA24EE0790D947
-:105AC0003866BF827DBC9179DAF6D9F70A3C25BCED
-:105AD0003CCEDEE8CF0ECFC3A2DEC35EEE5730E68B
-:105AE00025AB7C9CB1FA7F162F6BA11F40B5FB2123
-:105AF000AC7AEE1651DF15B4D6CB869F9523F8E12C
-:105B0000F15806FF8EC5EFC6387B112EDACF66DE60
-:105B1000876B87E752FCC64128E8EBC67DB3ACBE75
-:105B200086711C37B16D12FA4557C93AC527E81A74
-:105B3000A80FD2F9273F7FB8C9797218F59D47C4DD
-:105B40005500C655044D7189C2CF79A7FFD687B1DC
-:105B50007C85EE56F17D9361EF641EB77A7805C5BA
-:105B60005374B19D3A8E7BC85B99C4F7AC9C453D9C
-:105B700064CF3B9D33E399E24C651FE7DBB30EAF87
-:105B8000233DDBA1F17B371D72CC53320D5DD53A3D
-:105B9000C96B97963B7ED11E07E952EDF187567C83
-:105BA0004DF771FA26C4FA9BF0869BCDF149219FEF
-:105BB00097CA87BD56F83A11BE00C215A778D244DD
-:105BC00085C381783B5EF019E32A558E28E22508CB
-:105BD000318A57F184641AD7E1E7F8CD362E68F29E
-:105BE000FBE6F7638E173E47D6DF18E727197CC41C
-:105BF0004FDA024FC336CC3FE7A4F5D43ECE7E5FEA
-:105C0000EC349FC92F2CAB317A77C6E8EFDC713CBE
-:105C1000CE5BAE00F2E32B106DAC62F35F55C1DFDB
-:105C200059940363C44554D8FD15D9CEE5F8F988D5
-:105C3000719E53FF073EAE4FC40B14C020058B1658
-:105C4000A14A9F8CF1029AC4DF81084B3CAE7C3E96
-:105C5000C59107BD9F75BF8BA95F29B21E8EFA8FB4
-:105C6000A15F7990FC5C9F79BF63C0EB85BBA95FA6
-:105C70000C4D3D5A9AEE17F52F39950E1F3D8AE7C8
-:105C8000664E30FE713B5C76F07B55505E48718706
-:105C9000AB83D77BCC746DF5555BD65745EDB84ECD
-:105CA0002AC47B9FD7440673F0E56A9423F42356F5
-:105CB0005C1619ACCD5ECF805366D3CFE40FED50A8
-:105CC00062C956B4172B033C5E558ED3F948A754CE
-:105CD00032ABBBCEC4BF154A0AE12AA88BE818CF65
-:105CE000D859EA08631C960C3DFBE87D27E7A270B3
-:105CF0002E79952BE4F7CCF3D9ECB3C681AC1A839B
-:105D0000DF570B7D9DADDCA5846399F4F0E33EB1D4
-:105D10008EF932977FEC6F78D49761DDD921F454F6
-:105D2000673153A59FE3EC837C2057EC790DF1B0EC
-:105D30007ADC39B9F5936AD54FFFE58FFC04C7C902
-:105D400001C7B399E0007C4C210FBB5F5D40C18867
-:105D5000E978A020E76B8C0392C6D37928FD5B5BC2
-:105D6000775F0AED6ED7924004E9E78C6C035C47DD
-:105D70008DB82067C4F7B683E8399FC707D5723F4F
-:105D80006B84FD477164F373C78D396DF95FD9E991
-:105D9000DCF20CBD1761C06FC4A9DBE7F5A4BFE15D
-:105DA0002DDF9C4CF8C86F1FB491F10B307ED9C029
-:105DB000D6778614E86B5129DFDB12A27C4F8B4625
-:105DC000697B4B2DA56BB0E93C8CFF8827AA703FFF
-:105DD000127A207439ABB2116942712D5B17E23E21
-:105DE000B27B240FBAC4E0EEC6FBF1CC0EFDAB6F64
-:105DF000C342B443BBC5BB3BA0772C44BB2C9DBF67
-:105E00006B35DA85DD228E565D73DF42DC3F6E9C9A
-:105E100064EC93239EAF9AECAF297E17F11FEDD56A
-:105E2000A8FDAAD5D89F571679D8BED09A8708C2A0
-:105E3000E3F5F0FCB9FEA7081E52016CBC0BFC4F49
-:105E4000537EE314E17798D634061EB91FA3C3A787
-:105E5000713B685A09F929947018AF17C0C66201DE
-:105E6000779EFDE0FE87D6BB9733AF9769B919637C
-:105E70005D13708C457F860EB22F500FEB38EE2BE2
-:105E8000FCFCFC788FBBD1756C7851E60EE978F597
-:105E90006BA72F76869FB52F88F4A7AA58BE70519E
-:105EA0004A27F1CD73DC32BFB84FC6E68BF26FE004
-:105EB000D9B03BAE433A8E4BF7E70A46E8BCCD2B50
-:105EC000DE13CE17DEA53ED5D20F3CD65096EBDCC6
-:105ED000655CD481414623FAA2B4D127823578BECD
-:105EE000385262C917CD2DB7D42F08575BCA5DEA67
-:105EF000C996F2BF954E5FF7A916BE8EDAE6B5D009
-:105F0000569E6FBFDE154E0DDF83AC920D7B740382
-:105F1000DD4B3E883846FDD83793EEE9428D710F50
-:105F200001285EC5AB45883F7D10A6755AA9B0DA39
-:105F3000A972D06AA7869AF594D12FC6677B572895
-:105F400034EEC83A15E0F120C63919EDD727A3AAD7
-:105F5000FBDEDE2ADE2E6CBE7F6F4F65715E4677FC
-:105F6000EFABC63E4FB58F13FA4AEE38357B7D084E
-:105F7000C8DA0193FC656F27C301D3BB1A5B91F6A6
-:105F800073D2F88F6C5B427E0F37303B9AE17955C4
-:105F9000E84288B17976601546BF04A68CCF3B42B3
-:105FA000B3548AC3D7385D1D1E2E27DFF16B967858
-:105FB0000E6780CB89516F2CFADFE48478A6F5EC6C
-:105FC000153FDF271FBA35FE27DC5FEA2F01BDE34F
-:105FD000DADF324CEF5CD6A5CE75A2DFE435FF7870
-:105FE0009A4FDDEE88F36C533F75C0DFFB66FF9C74
-:105FF000667FAAE11F86C31E8A0BDE9EE271C1DBAB
-:1060000053FFBDEB28E6F73AE85DD1EDFB72DB57B5
-:10601000FDC2BE32EAF5EFE5FBD57E19FC25B9ECF1
-:106020001C71FF6D66CA1677288313E97F68A5E6A1
-:10603000447BA7BFC523E1BA3F4BCCB32E1571E219
-:106040007A3AD6BC76DAE86BCC13EF1FE23CDB037E
-:10605000FC3E60BBCAE64B7CCDDFCBCE06EFC8BEB4
-:106060005FCD8C0FA580BF7BA1B8626AA6798F75C2
-:106070004FD180AF03E19330E5707504391D3A428A
-:10608000B9E9B04AC067D46B0F723AB433FB201F32
-:1060900078E480151E66E34968170620D9486F9A90
-:1060A000E9F012EE8348556888879DA97B105EBC95
-:1060B0007781F67C719D7439DEFB8871FBB0A02E70
-:1060C00095DA1124F3248AF7324A0707526FB1F2A6
-:1060D0003DCD7E7AEC49BD7C7F0AFB91D521929F14
-:1060E0006E1C8CECA3C91D68EFACC63F994A9FD0CB
-:1060F000133A07ED0F19B85E6012A7C9E3857D92C8
-:1061000041DE4DE7FBD25177BA5D36BCD9ED4E3753
-:1061100034E5D657E2BC5F67FFA1BE516DF723ECB3
-:1061200076AE3D0EFE0CD4E7E3F2B887F129C7291D
-:1061300082FB3CF81E82B3D6A1E23BCC4CA517E310
-:10614000FD1F7F448614A3675160909ECE1A0BEF0B
-:106150004CFF35F2B8D17E30DF236D0A703F50B06E
-:10616000A94E92F83D020DDFDD0C36ED0D67E253CE
-:10617000833F47F28127483FAE866402E34EF446F0
-:1061800007AD6BDDB5D5C5E6FDD1750149EC430D15
-:10619000FA83269F9AA63F9B5FC43BE3EF47FF929B
-:1061A0004556BC1F2B5D5606B85E1A8BFE9F761CAB
-:1061B000836EA3E5A355D06D23E9BFAE9AFCF44AE4
-:1061C0009A6EF791BCFA6B2192CCD0AE4DD0CB7EBB
-:1061D0006FDF0371C0DFA3708A7854E784539BB7E5
-:1061E000420EBA8C8AB3E2FD3803DC9FB656F285C4
-:1061F00071A8B559FCCB350592D0FF833C9E6FDE6C
-:106200009E109E1FF7CC3910C2738EDE4F329F4313
-:106210009E5B20CE4522AFD33EA0770EF70BE23F28
-:10622000D43B37F13FA15A7F7713BE63B6F64DBF1B
-:10623000C51EEA68C9ED6F50CAAF88A19D71E86DAF
-:1062400049C3F5462A5F7122C235306F29BD3BD262
-:1062500051B793CE617AC2B9E962C4997688B8E839
-:1062600091F1B39C1B1E12F25AAD5F4DF6656FD9CA
-:106270004B34CEDABADCE3E07B59B9EE45791C1039
-:10628000237FB1ED5CF70D31DE1B01713EE18A7EAB
-:10629000697215FE2E874EFEB1F1B5D10107C35BC1
-:1062A0005341ECD500A36BEFBC1BCB100E7C27C673
-:1062B0004CF720F69F01BEF1050E8BDD74A83AFE67
-:1062C0005F2BEBF0F729A6D2BBF546BD9E2C71ECF7
-:1062D000271B74D6BCB4EFE9C0B87F065F4F597E68
-:1062E000F837E87C163CEF998CEDB3C4F91AA97D18
-:1062F000BD1F0BEF763CF4BA06290EAA57CA3C9F85
-:10630000730BB8DCF5AE4CF173B57907E85C2D90F2
-:106310007A9DE227BE3B671F9DAB5516707A601CC5
-:1063200025DA518573F97B80D9E4E85E413F59B5A0
-:10633000D60379D072EEB32520CECB82B9FB33E001
-:1063400004CF203FEF192D97B4FE3CD8F3C01E7A3E
-:1063500037055274AED0F18A13EFA68EE061945CDB
-:1063600025F8EFC2F4E2C6E3741CE7D60EF493F40A
-:106370001AE76C33F9BE49AE4BD1399BA740B3D86D
-:10638000EB81B0F12E627EF30CE05AC4FDC332AE55
-:10639000ABE88F47F8DA675E48FEB46C74FD8E3F59
-:1063A00036BB609CD9AFCFF75DFF6C7C7828A059D5
-:1063B000EC433B3FBAE11BC7B4AFCBE65F3E24E4FE
-:1063C0003388154DFBA46F162899F1FBD64563E180
-:1063D000F79B99F17BB10FE13D747BE6DF2732D269
-:1063E000BB6CFAEE2E231E057F24A48CFAABBA20D8
-:1063F000C3BC8D75F55081F17E4FCC87EB46B53E21
-:10640000DF87E33FD473A90FC77D68536E7A1AE321
-:106410006F11E78B49F1EE88519E147CB9D5A6E740
-:106420005F16727D8F90AF873C511FFD5EC5AE8BAE
-:10643000CF3B89E1AF9AF105BA14B52E28C9357E54
-:10644000956EDB971CE3BD96DE025B7C6F9EF73496
-:106450003F2D5EB622FF9C8E78F877927B67AA88E4
-:10646000E4A9FA1ACE37D5970DA5705F3B79A3231F
-:10647000A9511C4B8CF052768DAC514C9BB8F77ADD
-:10648000A258DFC1798BA312CBF1DEB88A6E17F563
-:106490006B140F73B7F5F73F1EF244DA14B47F1391
-:1064A00014E908D53DD6DFCB9808A6DFAB60E396AC
-:1064B000BDF92EFD7E4A99ED77413E2DDE77FC83B6
-:1064C000F09E94C167D6C79A04D14C7AFF3F055F0E
-:1064D0006AADBBF93B06F100BC633AE760F42B41BF
-:1064E000BB608BBEA11EF1A927203C25831EFB6D3E
-:1064F00081DFF81D9FDDF8CE82AB82DF3F5BBDE41C
-:10650000C2C11D4C656DB9A5C1721FC0A4177E5BC9
-:1065100040EB13D70B49BD89A7879DC427537A2029
-:1065200089BF83B260637CC085A27E0D7F87BA2C51
-:10653000A14B0ACB5733F395750F93AF005E7F31B4
-:106540002423C447F06A687CFAF74E2A07AF1BC0C1
-:106550007DF11EB62FC6DF51317EAFC4E097897141
-:106560002B7F4C4958F3136CFC626F5FADC17938D7
-:106570007E4D8F03705F37AED9541FFB83A1771F09
-:1065800066E34FD98D0F33B2B42F77FF32C45C85E9
-:106590000C9F4FDD1AF8652D9BE0FD3D0DA58897FA
-:1065A000873C40711107A31E7A7701A299CF9346C9
-:1065B000F1AD61F767A99FD697BC9EB1EE75BE2974
-:1065C000F1772E2AD5B7ABD0CFF92AFFDDBAF4BBCD
-:1065D00015A7D3BB15218873FB11A294B60BFE54EB
-:1065E000CFAEA8427F68E22DBF8AF7B3D452AB3F4B
-:1065F0004D2E69A4F7C046ECEE126677B3F244B1B3
-:10660000558FD61772BB355CC8EF85AA7EDE0F7832
-:10661000F432B3DEDF582859CB037AD9974DE50D14
-:10662000A27D42BC5B7E56E1799D68CFA81359FDDF
-:106630000CFCB9408C6B944330BC0FDFFFD8F48D59
-:10664000A639E6F57C63213FDF514F10E35664869F
-:106650002B51C5C7BD4D8CBBB1D0FA6E1CA83C35C3
-:10666000BEDF5170A3B49FE1FB900B1A305E65D57D
-:10667000384712DF4DBB69BC1117965B4F18741871
-:10668000C1B7CAE391CAAF50673933C8B1916E6ED2
-:10669000E47E2AFBF74BC43CDAAF68E8AB61704597
-:1066A0007673B9730721E3391093EF4B0AE7645807
-:1066B000F7DB1B691F77A838F7BA6FDFE7CAC2BFDD
-:1066C00068AFD72AE8A4BD1CA2A7B8DB43DC9F684B
-:1066D000F47FA88CFB15EDEDBA6CFD7BA1298271CE
-:1066E000C678BE8AE7AA4A0D24F1BEA92FD8A756BC
-:1066F00069181FB04FC7FD91060C8FE8670B03D9CF
-:1067000075ED21BE1F95437DF50E8C278146D56C16
-:1067100087958BDF5534F2AE40ACB590ECA1884440
-:106720007891F979FE2157F25CC4E7AA2A07647AC6
-:10673000A7BFA790DBB99BB5A617AA32D06F7DA1E2
-:1067400066B19FCB87B9FD9DAD7EBA1E876F841F52
-:10675000433ADD3F008DF3635341E4F6C24CE7B7A3
-:10676000865E117EC84BE70A850BDA45BF66F3B833
-:1067700072AF8B62D3CF3ABC650FEA5F27D3BFDD20
-:10678000F43B727D7BD00F7919DE7F62F92BDF9CA1
-:10679000AE54B2F257CB9DE2D1F968218EFB01389D
-:1067A000C85FF201BC5438DB44BF270B15BEDE24A2
-:1067B0005CA4470D7FDCE57D2E8B5EFDF6266B7EAF
-:1067C00029348D473FC5D28D2E4832FC5E69D3BB3C
-:1067D000F717F273A26F43BC03D7CFD5E2FCEFDA11
-:1067E0009F4C57506EAE9CAD56394DF7AE9E2DE482
-:1067F000F6DD7B8C8F34939C5D15482AB88F7B67C0
-:10680000FBEC0B3F0FD84FB2A31CFD69C599E30009
-:10681000BF95B0C239D63CEC701BE779D9E090B790
-:106820004919FD42CF154A167FFC2A0F7F0F29B266
-:106830004A06EF9918870774CF4F7FB380DEEFD6F3
-:106840001BE21457A7B7B9D555418AB3A378BA1537
-:106850008C60F8FED001C17F465C1D33284EC37D9D
-:10686000DAB59E4105FDCACBE57823FE749A712EF8
-:10687000E376C5221319FCAE67EA5313C1522F9178
-:1068800067BDBD52755EF51A1D39FAFB50E8C95F48
-:106890003C76BF82EBCF078FBEFD4594C3AB9F759F
-:1068A000025ECDFBF0B10248D1FE21A9A09C5FB5EC
-:1068B000DD99F11D098631EAFFEA1F15905EBCEAF9
-:1068C000097772116B7FD5D3EFCC00264F1FB60D21
-:1068D000ED9988F87B54E2E785FAE00C5C9FAE9274
-:1068E000E19B99DE1DF31671797FFFA7FE66A49FD9
-:1068F000B46DE012EAB7FF2297F95D7C28E2EB0F56
-:10690000ABC7E3261F91925332E80F633FF4FE2397
-:106910003CAEE4AA675C490C09BE6ADB5625C6E0BA
-:1069200058BEED23E297B37FF47821E261F9334E4C
-:106930008B1D71F58F3EE9389DD1F96A270C2D42E8
-:1069400039761EA6FCC18867C84972CDE35396917B
-:106950000A60F59EFCFD39BF66E5EF859C8021AE9F
-:10696000EFEDFB9DF22CE6630166B961FF56BE5E5A
-:10697000BEED1D857EC7C80143159FC7F30FAB9DB4
-:1069800064AF0F30A4A09E5ADEDFF59193F1DBF2E5
-:10699000ED1FBC817CB7DC261FEFE11F65A3EDF383
-:1069A000994536FB7C5B695EF6D1D58F1FBC17FD20
-:1069B00011EF3FF1C77BF11EED35473EBEF77B1867
-:1069C00017F66F5E15E57BF9A3AF148249FF9F5F51
-:1069D000C4D7CD0F1F79F8A1CD6CFE1FBEEE266C7B
-:1069E0007DB8E3F795E8FFF9F0C77F1D8FFEA01B88
-:1069F000762CA4DFADB9E1A9B327E45A17915F93D0
-:106A0000E6DF5714E746DA33121A93003F13A98DD5
-:106A10001ED037A4E0BAF6170986BA8BD9F7FE4F15
-:106A200014B4CFF6446008F1B36BFB3B7B6E66F9A0
-:106A30000F187DDC19E8C3E63FD141FA99890D4B67
-:106A4000976DFFF297CEA8C3D44576F8721822BD91
-:106A5000398AAE2F33BAD6A5E96A2F3F0887153C8D
-:106A60003758FE18A3E30CA427A3E38CD174FC00D1
-:106A7000FF98379A8E571559E3920EC2355B3663ED
-:106A8000E1F6D28CE7BCC63EEBDAA7BE9AD37E32E3
-:106A9000F4C25878BE42E2709D5A14B9B908E5EBC9
-:106AA000891F3CB439C8E9BC8821E6C3C70F560228
-:106AB000E3933FB8862E413C0CED70ABB8BE5FB59A
-:106AC000E357246F1F3EF5A2A2517C0B144AA7B2D4
-:106AD0003C8CFC7B09587E99C433D73EF0FFCE79BD
-:106AE00083B5BF167F3A5525FA517E0F933FA247D3
-:106AF000F282460DF56E721CCD7B5992CBC5B2E485
-:106B0000C05730AECF8EF7278B1C86FE1FA12BC639
-:106B10008D2DDBFEF639C87FD9E869CC5FC5F99FBA
-:106B2000C6CA1FB0CA6D563915F4FD70EB2105EDCC
-:106B300083D4B38AEA60F6F087AE2185D6C71F3BBF
-:106B4000D507C3A3E99EC6BF883F3AC67DF80FEDBF
-:106B5000722EF033969C8F3DAF63C3DBDD451ADFA9
-:106B60005FD9F0F7FEE1CCFAFF39A1379641BCB10D
-:106B70007CF2E8F54B86A83EB12A0DEFFB183FC624
-:106B8000E07DFF5127ED0F3BFA77911EB7EB8B6548
-:106B900059ECE8378AB83DB0EC998119A8D7DEDF07
-:106BA000F953E2CB658FBDADA0FF66CFB62795C187
-:106BB000696939C0F5C1FC3B38EFFF706006EAAF88
-:106BC000E559E2007F2FE6B3FC67D6FE973FF691CA
-:106BD000A5FFABF57E85FC64638CF39E1CB908E7CA
-:106BE000FBDE3E179E60C07BFDCEC64C76CEF362C8
-:106BF0007D34F0D45170EA6B4578EE55C2DF616C9C
-:106C00006F8DFC8A7EBFF74597D8DF465E437B6673
-:106C100055B142F711DA0B2E247FBDD15F9F0D9F36
-:106C20006A50ADC7FD80BA205A67DE5719F0174782
-:106C30001C16F86F28689CA005F8FE4C63FB8FFFBC
-:106C400001AB8A1A34008000000000001F8B08008E
-:106C500000000000000BD57C0B7C54D5B5F73A73CF
-:106C6000CE3CC24C2627AFC9D37892F09480431211
-:106C7000DEB40E0491226A505AA9F5AB03F28821C2
-:106C8000C9A4F8E25ABFCB8444F4029F8D95166ADA
-:106C9000693B70A152217690A0B10DDC012C060554
-:106CA0006F105F78B18D5A152B246314B4575BEFC6
-:106CB0005A6B9FC3CC9C4C84DEFBFBBEDFEF0BBF4B
-:106CC00076BBCFD9679FB5D7FAAFD7DEEB0C28DEFE
-:106CD000DCEA5400D93D6B366461AB5AD41409E048
-:106CE0002BFABB2AD6028400C603585DD5E0776133
-:106CF000AB5A407300FF7D45FFA7785B7BF0F97BC3
-:106D0000E5D4D6B5348FB5F157D4872605B657F2FA
-:106D1000B0914A25DDBFC2BBB61860A3F39F1FA781
-:106D2000FB2B8376D58E6D73EA3DBFA5FE0609AABF
-:106D300065EAD3F3383E6875A8DB55BC9E0E0BC2DE
-:106D400065317AF25424321BA00CE9A016FFFC3006
-:106D500001DF2B488266A8031C012959A120B5C672
-:106D6000730FAAFE62757CAC2FBBBAC18FF35E2D88
-:106D7000BB2CB4FE07732D217B31B537A641D9401A
-:106D80003E18ED03ABAA213262F0FBADD98E855BD4
-:106D900080E90E5A681D9223B49D08F181A67A807D
-:106DA00069030DFF873C74C4D18D037CB40E45BFCD
-:106DB0006FC565D14D3B04B94D213960EB84084066
-:106DC00029D2AD96B05C52A1479F240AD563006ECC
-:106DD0004CF57F93D6993BB451A2EB1EA8E6B612B0
-:106DE000FC12DDB738EBF2FC5FB33E58A09CE9190A
-:106DF000A9CB175FB1C12AF8AF28A00C29273A36D2
-:106E0000ABEF8FC679E87E268D0AB21CC6557D672A
-:106E1000740BC181888FE3F323336764126E8C7126
-:106E2000CD8EA29312F2DB27A7A82945D85790331D
-:106E3000C4A753A9CCA71F4DC399F1FE8F4FA56ED0
-:106E400095511E8F48024F41C213E10A1A1F277C39
-:106E5000B8113F6BE9B9198DBF65BC58A0BAB952DA
-:106E6000E7A487F827FE106F8CA7958A43B57B8926
-:106E7000B73E4DA1796C105A2B11BD7EE6A7035A7F
-:106E8000B91D02616E5DD0CDED5DC4E76C92839754
-:106E9000FB69D0D33A149F9BA356D7AA78FDC7B3FA
-:106EA00033245A9F0B549DBF8579D41F94BF3391CF
-:106EB000BF8E187FEDC44FE7407E3A40653EA47B0D
-:106EC000C1BB761CCF0B115CC723D321243388545C
-:106ED00050112F39FA3A33C127117D841F5A5FF6BA
-:106EE00002B13EF3FB72A195C7E54398DB42E8E6A9
-:106EF00036C3A14A0AD3734A97EF3BF09533468FC6
-:106F0000D1DA09C138FFB9429CBF98B9ED963CB4BB
-:106F10007EE3AF9A71F887CA83BE2A1CA7F85D3E4C
-:106F20003B2EE5FF54CE201082F5720548AEAE9E92
-:106F30008573C18DC3BD36888CA4D9834C5FCA4884
-:106F4000D137EC8B1D051531E8C7E7ACA73E3C45B2
-:106F5000CF59216E1CD121DF9A467C7F982E4C1E82
-:106F6000C8F795A79AB29E8B9B77AB9A9A45EB840C
-:106F70008930F12B39F63C4CCA402333F0F9CF5617
-:106F800005B39EB3C6F8D0E2F867C6A50F019CF220
-:106F90004DEC138EB36238465CB29D0BAEB6ABCDF2
-:106FA000598C43C6E94A64901DDBCF528A42BC7EAD
-:106FB000689C7823DA618BC3274978BD4E75878832
-:106FC0003FF5AEF02CB61326BB317DBE1AC9C77192
-:106FD0007D8DE025BE6EDC73C369E26B9F07347B59
-:106FE000BAC0856F02D909C38E8026A37CD748E337
-:106FF0001C12B6F5ED1FBFF47B1C9FD229838CF7C2
-:10700000FB70CDDDB46EC5974E4274C2FA04FD6EBE
-:107010007608FD31D669D6D77F749D28799E9FE585
-:107020002093FD5DFF2FF47C3FA4B6D2F84D0ABE3D
-:107030009AE6EFB286B6231F561C91196F2BDAA47D
-:1070400010909C152D8DFAF7BE2883C01FF0FD7B94
-:107050007F55CA789461F48FA6E1F381CD562F5AFB
-:107060004C48F725FAABCCD943408BC301047D2FA4
-:10707000E722BF16EBFCDAE87C780BD1B3A949F81C
-:10708000A7ECEA8C84F19FA55C6F5B8AF36B79486F
-:10709000D714C24DE7F035D85F5E20AB329A889C9A
-:1070A00005F989FEB1D5FA0EE99F86FF08DF86FD56
-:1070B0005A4AF68BEC907C3FFBBF7320FC9F02C2C8
-:1070C000FF35A0BD8AE07CCB3689E78DF96A3A1F8F
-:1070D000595380ED1DA1C4EBCB4189F5D9CFBA47F7
-:1070E000921D580943BC766920FE2DE9887F0289EC
-:1070F0000B5C420E2E2FD997FE5764AF5DB082F520
-:1071000095F84E7644EE19B1711ACE17E8B242489E
-:10711000237989FBFD9BE550B038A61FFD5D7B9868
-:107120001FCBF2901F884F7B6E22FF53B444FE3B6F
-:1071300047667CAD3C52BD267ECA7399FFC86FA0DE
-:10714000F9D32695243EAFF37B24FE13FCF6319D44
-:107150004B3B24784C223EAF3F5CA00DE46B43C711
-:107160002336D2FF8BF1D5CCC7D1E9BA1DD1F9783E
-:107170000E3A0FE8A8AC7678D894F03A14B5753A80
-:10718000E1B410F5967062D66B837FD62CD567C3B9
-:107190007197D1385C5FBE232C94D10BCA09C2CB46
-:1071A0002261779B551FFB23C3DE3A2FD8ED77E191
-:1071B0002B6CB3E6553E4438BA534A6D952B07EA1B
-:1071C000EDBA31F7B0FD2A5C8DF698FD6A629C1627
-:1071D0005EE5F02E467A9E5C05DEC5C3009E5AA58C
-:1071E000726B8EDF0C7DDF8CF19B5DF8679E5741E3
-:1071F000FCAE55C9FE7855A2F3611BB09EF69541D1
-:10720000682BBE3F1CF9D4A391BD2E8F5E5F8DF11C
-:1072100045600954539CF1AF1922AE7B466F6765F8
-:10722000D8B85D5B6D011FBEA7B7530E49485FAF6D
-:10723000EA3B7215D99D4EABC6F1951A7DE97B7C70
-:10724000BF425D8BFCCCB3B48EA3F7E2F8D9219C8E
-:10725000B7AFF35DF7ED717EB9B7E3D1511407FD18
-:10726000CC0235E124F1D0F2740BC731BD23DFF13C
-:10727000E0B2A1DE11B501E2E9C19EC66A8AA7EEBD
-:10728000746A4C97AD7D7AA480F1338FE3E3E7967F
-:107290000E61BCED3D0321D2BB59F2ADD78EC1FECC
-:1072A000E45715AF9D95CA77FDC2093C84E5BEE160
-:1072B000CB8A4DC4BF00F273355F6C3D41F27AF664
-:1072C000CF0A90DE55363EFDAE1FD7793817D13044
-:1072D0000960822F5C11C151333BD3A7937E074EC7
-:1072E00001EBEBF86E2501B720D71D2A20BBF286F3
-:1072F000080F27BE61BA0F4199E2FFC93D89D7A7A0
-:107300005E04EFFF62D80D377808EF8FADEA807723
-:10731000C92FEAFE331F17988C9F06BEF738673CCB
-:10732000922EE2769970EB55928F7F2743C4F91B1A
-:10733000BE9425C2655F14BCAB915F7D8BF379DD94
-:107340007D9F524086ED97F2EC709278EBD7E9364C
-:1073500096DFCF6C02F73F5BEA0A35E17A0E2EAD7D
-:10736000BDBC07DF77FE9FFC97AB5F1707A369B132
-:107370004C6279A511DFEF9CD722B11E426B1EF142
-:10738000CD3CDED013436F0C7DC95B3AC41F4AF27B
-:107390009EE1B43EA46FC6D291928D70BB5F029203
-:1073A00063EF6AA4EB6BE2C720AC2E207A021D9F2C
-:1073B000D8C85F3B3A255F28C9F8C3E96EE65FEF9E
-:1073C000EA60D354E4D73D8BF059D20B5B6B71B2BA
-:1073D000F983B0A1008343684BD704EE1D701BE90D
-:1073E0002528AD79E4B77B3BAABE4576FD31D44371
-:1073F0008A1B7E66F532DDC17A80EDC4160A3CB187
-:107400005F783D6C591B974776A74F3F958EF39D4C
-:107410004A5779DE4CBF5722BABD7FFBCC4DF3F7FC
-:107420007D6E67F9E5930EC7C56D9FA60BFEACC9CF
-:10743000F0BDC678A9C96263EAF5BBBD8B2B00AE6F
-:10744000EC407EC7E13226B720AF3BC31F647A32DF
-:10745000BA3171E2FCCBA751BC1CD08D334424500F
-:1074600026C4EC73A5A3305220F287700EF237A326
-:10747000E6C76CAF53D00E53280EDD8979115B64DB
-:107480007C9E749FEC42B32AE2AC967461E75A1E6C
-:107490005142CDF8DECD4A4FCA306C8B7DDA0C45B7
-:1074A000237B5FC6F3E6DE05ACDF164748223BE4EC
-:1074B0002CFD45FA85B86B2AC0EEBFC9CC7FB39CC2
-:1074C00046EB7AB126C3FF05F1756C57F420856F42
-:1074D000DE14C824B9CE925DBCEEC96785FD31DBF0
-:1074E0001B39F2AB9F91BDE9D3F3A724F6E676F200
-:1074F000AF86BD01B9EC10E167EA8B7A9AA9DB1976
-:10750000CC3E980F138FFA9B5D49ECCB24A84E43D9
-:10751000165FD4BE98E588C1FE857E2132A3A20BFA
-:10752000F528EE79B33D2AC8D0FDAF6E8FCEC1B439
-:107530009CABB5185ECA577A0FD9E3F061D8A11891
-:107540005E428C33F37B24705CE8ABA5643F8ECA4B
-:10755000696477A6A3DC71FE2E5D4FD23F0D7D8B53
-:10756000E4BFA1F39A14C2F5535D550E529B15B9B1
-:10757000B2F6678C9F9503F383A0C385EC9DF15E03
-:107580002B3834D748E28785F920ABD88F7B7F7FB3
-:10759000AB349BEC220A2D6DFE98C1EDC18A5C1BB9
-:1075A000BFE7A9AE9234C2910B30BF45F955764A78
-:1075B0001C2798716DC67133BEC0C2796335C7137D
-:1075C000B214D6F71D12F3D2E2E064F65377611ECF
-:1075D0004E716B7F17FA2D6C9F423F4F714AB36B10
-:1075E00016AFDB58AF41DF5DA93372A06CE0FA8DB6
-:1075F00036F0B90CA1CCB8BE12B5118E039FDB12C8
-:10760000AE1BFC1C8C0F063FA7103FA5FF3E3FA7FB
-:107610006608B99AF9FA3F5D7FE18A49906C5FE0AC
-:10762000FF97F54F05FFEF7B44BEF55AAE27664F37
-:107630000A57CC9697211F26503CEE8DD90707FE9E
-:10764000237C8DED68657B3309ED0DC5990575616A
-:10765000B62F137345BE64B61B5776C24D641F2701
-:1076600047302EBD04FBF129FD471EEFE3FC32033A
-:10767000E91EF7FC82E5BBF0D2580D32E7E27BC68B
-:10768000762B5EF27BD09D99745FC0EC378CB8D4BA
-:107690008847CDE38C78D4F0270D3A1FFE3DC3FF19
-:1076A00064065D57D520E91BEA55F8312FC35EA368
-:1076B00078A13BBD7A37DF1F190E721E50022AEDEA
-:1076C000EBA0BE721C56E97045E4B103F5D369D254
-:1076D000C330F285F609822E4B689834900E0CB7B1
-:1076E0008314F7E103FCFEA5BABF28C4312CB4060D
-:1076F000E0F8BF702CF8C9EF1696638BEB3CA6C779
-:10770000232F995AA4FB79E2AB5581A0BDFC1FA79A
-:1077100097482C2827FEF8FE40EB77CCF631FD0584
-:107720002A78298E2F50C29217DF9F51A74917360A
-:10773000910C3F8DF315CCD5D85F160CC53E8DA7A7
-:107740007827895C7A32ACBCCE7A47CF611BF221B4
-:1077500030B771B6DB128BD3ED56BFAF80F68F3AE0
-:1077600044BC0EB4DF379EED9244EB516608FE0434
-:1077700054915FB94065BB59A9CBB1D23197F77726
-:10778000C827DA270F5CB7A4F97870FE7CD0829303
-:107790006376D5C87F701AA0F798ED6ADFBED72F41
-:1077A0000BA23EBEF5BF3F4905BCFF27259A4AFC08
-:1077B000387DFF89541FF2E3ADFB45FEF27D537C1B
-:1077C000A4640AB92ECEACFE82F87ADBAABF4D883B
-:1077D000B72FB0329BF5E28E904CC9F005FD59BE33
-:1077E000C3C97BCF46BF3E9C99D037F4A0DE0E8D37
-:1077F000C9E2EA6999222FBA63D7161BE5D18B3308
-:10780000FDA999D83FADC77FA7DB53793FC0A067DB
-:10781000D1AE7136E2F79F3AED106103D96D157262
-:10782000F65D2F4DA0CD7BF167A6F3F0FE021BEDB8
-:107830009F2F91202AF6B5E0F0CFB1FF5EAE0C6B22
-:10784000BD03D7B1E42DD56641F92C990ED120EABC
-:10785000D5A2BBA435F7E2F8457E17457003D6B92B
-:10786000309898E72FD3E395DB1FB29AF2A4C6C3F2
-:10787000B45FB618E7A17C76496BE2FDFEAE3B0F24
-:10788000FF9CFC40878DFDC0B28BE44FE332F5785E
-:1078900065024CFCAA94E295B21F956983DB25230F
-:1078A0005E39BD0A083CF097550E6ECFAC52B9FD5B
-:1078B00042B7D7CB3B0E1C665C2BDD13C8CF3ED541
-:1078C000F5AEF3162DE637BEB9E593433FC77E0507
-:1078D000ADB398EC65C44A78BC4AF71BCBF438A426
-:1078E000E273B3DF38F087DF539E8DEBDFCE19D71D
-:1078F000A5C523B782F2693C1F0C3F62E6477F575C
-:10790000A99370323F33713FF67FCA97C19EAB9700
-:1079100011D749EC87A14F5F64087C2FDE366F4D8D
-:107920003EBEBF79DF07453DC22EBD069E185ED123
-:10793000D033DE960144D7223EFD9DFF7498F87443
-:1079400098F03689FA97F1FDDC2AC42FEAEDB2CE21
-:107950000FDF84B1AC5FB9965C6A23B9945F9A710A
-:1079600068C69F196FBDD69E22B20F669CF54A89E4
-:10797000E76446BB34539C5F2CD67CB328DF45B705
-:10798000B646E5F508FB775A693DFC43D2DB6D123C
-:10799000E787F5CFB43D4DF6A8F6B73F71933DFAB2
-:1079A0005069F5D0FBEAB63FE0F6915D52826E7AFF
-:1079B000FEC390B04BE6F775EA7C34CE052EF8A5F1
-:1079C00087A26BEE437E9C477D26FD6D68FFEB9A98
-:1079D000FB28CFF039A294779E567A66111D772C3A
-:1079E0007435367929BF4D5C77EDE33FF168BC7F94
-:1079F0001C2CD0F9C7F96AC336AB3782F336BC22E8
-:107A00007BE9350188F2FACCCF07C2EFDAC87EAB4A
-:107A10001688164E1D781FC56823BD09B4AFFB58E4
-:107A200076532BE415203EC79D33D4E876D88CE3FB
-:107A30005D99FABE888E5FE40FEFA706912EDA3FBC
-:107A40008290B0C7CDBFD938F66DA4EFCCB617DDA4
-:107A50005259FCB9C26A96477FF8F65F392C83E326
-:107A6000B757C77B2C6E09F1735A87240E833A45AA
-:107A70005B678DB8296FABDB62F506F1725D9B0C1D
-:107A80000EF25F27ED1C37D4B57DC2F8AC937C5164
-:107A9000691C2FC32DC5C511CBDBDE9B45F676795E
-:107AA0009E0C7351A56AF79C13E37D104DC1F1CB79
-:107AB00077BF3DEB87D447BC3B92C8AB2A7CC0263E
-:107AC000F4C624AFF0DBB3281E6EFECD672C8F0FFB
-:107AD000F74B90533CF0F99A2DEFD9C89F9C41C1C8
-:107AE00064A60B7E91DF0884E585B6B464F28B5CF6
-:107AF000FFBB4ABECFFB7F1793E37A3A6B1BCF786D
-:107B00007FF2774847CD9B76EF5C7AEF9377BA01A7
-:107B100071F081D22870FF8B073CE4876BAC418FFA
-:107B2000CAADB85EF3CBBB198FCB8EDFED11F98DEB
-:107B30002F4FEC1705F3689D4B367F9BD7B914FC8C
-:107B40008CC79A5FC8D5B44F734E81D9BB93E84DAB
-:107B5000659688B7ECF083B1F789F300A0FCFC03CD
-:107B60007DDF34F8B2CC719B1D6E4C9B17B7FF6460
-:107B7000CF12F62A08A13FD2B96A00DD2B9F831CE1
-:107B80003F378BE6B9AB5869A473225C7F50E79707
-:107B9000F415EF0B80A6C4C55955C7AFCEA17D31F2
-:107BA0003BF4DBFE5725C7D51AC53D71CF31DF3E0B
-:107BB000D86A1F225D89AD27F9BEE9ED5986FEC35B
-:107BC000CB1087A7C08E0F184F80FE3B2D57F41F98
-:107BD000237D5CE46A4C43BE7DFACABB363AD70AC1
-:107BE000E27A8611BDDDEF711FBCD91A8D37E60F21
-:107BF00074D863E781A4D7DBDE33E975E27DF4DF77
-:107C0000CCCF00A46994B77D608BCE227F1EC4F7D1
-:107C1000527DC1D20DF684F3C6185E4CE78BBA7E56
-:107C20001AFB9CCB4CF198D19AEDC29559897601FB
-:107C30003667273D5F34E72175D6D0AF893F75277A
-:107C4000ED9CBFD4B509FDC3803A3A0CF5E1A35DC4
-:107C5000875EBB05D7F151D89A3597DF96686F6B71
-:107C60009E42FDC5F132F23B85EDED671C4F19FEDA
-:107C7000E823175E1C93446FF17A52BD7501DBB3A4
-:107C8000FF577676D92076F6BB5903E284347C0D13
-:107C9000FCE589E597537C61E6AF615FCD76F393B0
-:107CA0004C2DA9DD04DDCF1B7CACDD7996717B3ECC
-:107CB0004F9C37356CFB2BFB31646BD48EB86D0851
-:107CC0007DCCFD07C88F71FFC07C696CB27527F24F
-:107CD000D37CFF32922DE723D1EF139F658BDB2BF3
-:107CE000F6E7543ECF6F26BF49765A5381E40833F6
-:107CF000204C7187D4F9FC5FE97DE6BC223803464D
-:107D000036F2B92EAC8BAFCF092B7A3D4530797D59
-:107D10004EB32D769E4BF7073BCF7D5FB7575E97EF
-:107D2000CAE508D62C4D4E5657E2ADB224CD237E7F
-:107D30009225CE774AB3C5BA8F650979B4C8D5FA0A
-:107D400046A3C897680F95ED5FBA9BCF83AD7A7D48
-:107D500006CE9CCBE7074ECB27C812D8BDA17A8EA2
-:107D600042FBC315963B4BB1DFB5E1F6390AE2C7DA
-:107D70003BD5B2A704FB2F6C582CFA575A2AAC08F3
-:107D8000FDC7834BE6CCA47D03CBDB3FA5F529AB38
-:107D900015A0FA91D296F7B87F97559C5F353CBBFA
-:107DA000B786DEDF20A12090FF2DEE7023D731E4CF
-:107DB00082BA9A368FB53D7EBABF260FF3799447C3
-:107DC00024CDFFDB2CF22B8E885B2BA1BCD2B7F12C
-:107DD0007B785F79D94A3921AE53EC838FDE333516
-:107DE00097ECEEFF85F7FF5B56F6E0EF3FF3D4B577
-:107DF0000B68FC68195419E72B57B42AEADB31BF2A
-:107E0000A6BCCD9043B922F85EE6B2713ED792EEA1
-:107E1000CB253C1D239C665F7ADBACD70FC94E8116
-:107E20000339CDD2B81BDB5774F9BFAAF383FE68C0
-:107E30005FA06F5FCE56AE5B816811C95796B7B62B
-:107E4000113FA24D0A6CA5FDD77D8FB7113E5FB7DC
-:107E50003978FFE8E6B4F5D62B90E47247D19D045B
-:107E6000FE37A55D7753BB2FDBDF9325E68DD0BCB6
-:107E7000B77C5F16F3BA1A53C97F820FF54AECD369
-:107E800070FC0E7ED42BA2F920EAD5383205897514
-:107E90004E663AE4B45D4CC7CD7641C78250497313
-:107EA0000FD231CE1EBA8CF22B7C7F94E4700B86FD
-:107EB0005B84E760217491DC5EBFEDCA2D627D8535
-:107EC000ACAFACFF7CFE7EE6499A2F80F3D3396AD3
-:107ED00040EAE1FE1EC5A1065561DF17C6EDBB3DB8
-:107EE0000BAD27CAC4FE7E33E51D53F5BCD8D87F41
-:107EF00033EA0D2676F9AB5C64B0E54E99ECCA39ED
-:107F00008CD7C88E99F7DD269BECEFD48E8FD82EB8
-:107F10005FEC3CD099ADDBE37CC8A77584E93C906D
-:107F2000025EDD4F7AE93C3089FEC79D0766660B2D
-:107F3000397DED79E09DBABDD1A84E0ED7D18F1312
-:107F400093DCFA8F2E82F24AAE476884F4C1FD6A50
-:107F5000BBC9FE1B381FF38A7A3BD9B331AFC06D62
-:107F6000B4DEABF5F393FED3C0F580E37A1C5C1F5F
-:107F700068EDB28642525C3DCA490BD7A3F4833701
-:107F8000C4F52B41BB1A647B3996EB4F5A4EEAE796
-:107F9000BD7A3D438560D93F5C0F61AE7F98E29E1C
-:107FA000242FACE4F31990260DAC7F9822DF2A939E
-:107FB0005D81A3429E17EA20E43299D6752E0240D5
-:107FC00029DA8457E2E48DFF9B981594B9FCE954B3
-:107FD000E2F529265C98E57F6DB61EDFE8F21FB456
-:107FE0008EE443B1AF360EC6721D89D55C47F2866A
-:107FF000850B366375241521D2B7094D62DFF8620F
-:10800000753CE63A1D731D4E9E3F914F0535572432
-:10801000DCBFACB13CA17FF9CA2909E38BD1A1C671
-:10802000F74B1F9A93307E58EB8D09FD119B6E49DB
-:10803000183F2AB428E1FEE81DB549EB5E0C9C8C84
-:1080400009AF48B8BFD1F9E4BB84AF963C59A578D5
-:10805000FECA8EFB4C7531D31817538C7D785DFEAC
-:10806000465D1D9581119FC7A3FC1F2BA6B8E9FE95
-:108070002A491B88036F24C87EFC1FC5C17A931D43
-:1080800030F4FF62FB373FD6FD849C5224519CE3C1
-:10809000C3B82A652AD5118B737B784BD4AB7C96F9
-:1080A000F2778E8B34C9ED856FD25B5589E2A07B68
-:1080B000AB348E83EE1D527480F60F7A7EE0F64A62
-:1080C000F903EB42CD75A0190EDF64E0AD11510745
-:1080D000D982869EEC7F708683E38C872D96DBAAFF
-:1080E000E3E87F225BD89F27B245BEF5735B783704
-:1080F000D901C5016A539E789E8A1F802A7B502E23
-:10810000EE4C10F561F0C6DA9985E43F7B466AE9EA
-:10811000543F8BFD6FE06525C4FEE4966685F3BC95
-:10812000D5CE27D99F942BC29F8C9385DF403FD219
-:1081300041F6F14DE97EAB88B38256924F810382BE
-:10814000EE72F6AF7C4E9C0E59D28A32AA4FBDE039
-:10815000B7B4AF104C876AA75A884FFD8B653E0FA6
-:108160007E8948427AFB6B46719D73FF85FA3F2DED
-:108170008DF2EBFEC58F9EBDBB32A697276DC9F36E
-:10818000BC8BEDBBD56C793495CE514E8E8484FA80
-:108190008C37B3457EF866B62CEA0C42EF79884DF1
-:1081A0007D4BBE184E4407A4EE352E1CF2E0A61FF0
-:1081B00054935C6CEDF382B4AF69ECE35FC8033BAE
-:1081C000A773FDB6912FDDFCBAD8D7BBF98BC47D60
-:1081D000EB8FB2C5B9C047F43E6CCBBBFCE3496E34
-:1081E000379042F0BEB27F3CC507D52A68E4F71746
-:1081F000F817DE7D14FBF3D64B1CEFD37D1A7F23DB
-:10820000CA90EE9F00EFAB7B91BECFB3053DF3A1CB
-:10821000DA4A74BEF6FDFA54C2D3EBE9627C54022A
-:108220006D6BDC7C37E8F3BDFEFDE57B294FA7F7DE
-:10823000D1FB891E7AFF3C154AA8FF1AF8CFBE5A17
-:108240003CF0BD3781CFAAD77B59C94F9642A8EDE4
-:1082500069B2AB472CDEB5C06D2493FD929DFD52F3
-:108260005F53F4C97B90CE3FD5FE75AF847CFDE3B0
-:10827000C2E8AF9FC6EBDFDD248386B8F838C32F92
-:108280007BE2EAB44F2EFE2495F889F1CAF69F925C
-:10829000DEEDB47BA9AEE3CDDA9DC3E3E3FA54CFC0
-:1082A00074073D07932EED3CADEA89C98CBF15DB01
-:1082B00005FE56FC66440EE16C45EA05DC89FEF6D7
-:1082C000523E279D2041D2FC783FE24D1BC17535BF
-:1082D000A021CEF67F2EEACAF71CCDA820FA14F012
-:1082E0005F16BF9E3D2FDD329AEB79DFC8BA243A84
-:1082F000496783687F6F665389F181AE270B3A33F4
-:108300002BF478729487E2B9DFFFE6EC7F105FF61A
-:10831000EDDCFE43D6914BE3C3C03A5A7527DB2709
-:10832000230FA3BA57CAD30E59D84F5E2DDFCF798A
-:1083300018D56970DE35A488C7A3C151ADC2BE8906
-:10834000EF24300E6EF672BD27EBEB4A55C42D4676
-:108350009E245BBCB98AF8C8E0C5A93C7F09D0FE61
-:10836000989B122BC35E611CE1962DBABD029F0340
-:10837000F3D3D1BA3D9BE5F15EDB22CE6B12E24F27
-:10838000EC57ED4A127756E33F8E3B37FB9B53D8B1
-:108390002F6D96CB28EEF03922E4C7CD71E7545803
-:1083A000CFFB0003E2CFE7FE7249F1E7F73CFF3D68
-:1083B000BFB3D4A3B1FD098F14762E1C19C2790E58
-:1083C000FE55907E0DA5BD003A07CD13AD4DEA1DBB
-:1083D000E940FDACF594AF7B681AC265A8E00FF5E3
-:1083E00051A450AA7D72E82B8A03BB15965FFF73D8
-:1083F000577CED772495A887E4EC2387A770BD739D
-:108400005F97D08FB60CEDDFA7529E8171E65624A0
-:108410003145E9B1A52759CFD3647F511FC21E91C1
-:1084200047393AC4B9A843F301D99714551D478970
-:10843000B9317EB147D8DDFAC36F16D9503E672DEA
-:1084400047DD74BE52B7F729372E179A33FD0F90C8
-:10845000FE2C3FF9F20495EBDCB61451FE1D8EBCE8
-:108460003C83E3B3D9C8DA7183AF27B0A9823E4217
-:1084700080864D99DC8EA27D15BC14888875F676B1
-:10848000346724DB1F08FCDB5B0769BD3B8FA570ED
-:10849000DCB233BB9BF520380F603BF2FB89CF4742
-:1084A000F37C0830A6E38A6A4D227FFF0B7D3D3BBB
-:1084B000F5FCB2F77399C719F38EE9982EAB88AB28
-:1084C000B248EB41AEE3EAB46B24DF946D20F8D3FD
-:1084D00099C2756181FDD788BC335D9C47B70D8912
-:1084E000FE91DE13DD67D7A84E35456D850C9CBF28
-:1084F000CD26FCEC2804FE53AED875E37D299D1BE8
-:10850000F92308C405D7E3A528ADF00D573CFF5368
-:1085100099DEFD1E11EFB40D89585CE4273057DA5F
-:10852000CA74C5E8047EAF41E7288E8BDB6CD1F7B7
-:1085300069BF1DE9520917A340D0099D23348A570A
-:10854000525471AE9EA26ADEA03490AEC05808614B
-:1085500070000FAF860B7ACE758443627D07EA42C6
-:108560005B891EC70417AF9B392DAE4F866C52EC4A
-:10857000F9139E65EB5A0A695DC20F2A4A98CFC764
-:10858000DD0B40A5F3EF14C5C77952CA7CD09A50D1
-:108590005E4E878FEF7B708EA6C9DC8F10FD2ADDC3
-:1085A000A77D9B34D53907E94EFB328D9F6BE8B62A
-:1085B00072DD79DDDF6F4A2BC3F59DB11CBC6717F7
-:1085C000B61F2D0C0FA773DA0969FEB7C81E3F73DB
-:1085D0006AD1BA3138FE2F6D56EF5CB24B3DC11FE8
-:1085E000D3B97DED13568DFCE2836FF447BE22F9BB
-:1085F0003E2BB15DECB38AFBD8D79AF07E43E707F8
-:10860000363AD7BAA6E36D1BED7FAFCCF1BF4F7AF8
-:1086100030A9A3A98AF836195A9B699F13ED21D76F
-:108620004B847385BDE87F65F8D6A6383EBB72F4EF
-:108630007DEFA8FF72D29B4E5D3FF7537C84ED5EC9
-:108640003D4EDB7BE0BBA55ADCF969100EF27EE003
-:108650006A788EEB3A8DEB7D216536E168F46B8E9E
-:10866000DB7C7138B3E5087DB7E9EFFB798EFF4B12
-:10867000D6DB03EFD8DCB8FEC09FC345E4AFC21819
-:10868000CF7D5D1D69C0A42F17EA8E4E03DB919D3F
-:10869000AF7570FCBDF33E359DF41EE98734ECEFF9
-:1086A000C5F882F4686FB1D0BBA657CF8FA5FDE2A5
-:1086B000F3FB965F4EFCEAF5580D7CCF18427AB476
-:1086C0001BD88E197A58467A28D1F77B62BFA78CBF
-:1086D000F04D7A67EB9EC37AB7D702A477886FC64E
-:1086E0003BE25BA538A44C45BCF3F323588FDBBABF
-:1086F0005FBE82EBD991BDC3C651DFC2F86A8BCC95
-:108700000949F87CA53572909EAFC4F7376931BD31
-:10871000AC9412EB7A167B449DAC611F7FA0EB6793
-:1087200078A496E6C5F14E594EC07F9C9F147DDD1E
-:108730008FDEBBF127EB36A0BE94FA2A2C1328DE7D
-:108740003926B31FD8AFC7C92BFE30E5865DE23AA4
-:10875000FBCF888E8B837ADCFCDCAA5CEE935FD047
-:10876000502EE3B1F55550BD7763156DC54D9ADDBB
-:108770007A88DA29D5E12A3A2E9CB6A0FB90F8C671
-:10878000CD379AF0D67EF05BA3B94EFAA41DE83B34
-:10879000CEF6FF8CFEF1095CFF3DFB91DF90342E9D
-:1087A00061BCA1C766FC0D86933EA9E7FAA968974C
-:1087B000AFDBF8EB6B1574E80D04045CFF9C8DDBFC
-:1087C000D605D1079EC8F15D9783F8FB22D77F5D60
-:1087D0000EF2ADEFF87F7AC89FEC7DE51D37F9E129
-:1087E000769B6F34E1AABD04F38824789C9263657C
-:1087F000FF5A3948BD49638EC8B78607611DE1A598
-:10880000A15D5643E4A77DDDD793DF781F5949FB6F
-:10881000DA4BA707DD942FD5EC3DC475FA463EBD73
-:1088200004F43FF9D659C4FF73B9223F5EBAC19A26
-:1088300090DF8E80888DCE91037E5763044552630E
-:108840008A3BEEE8D8C2DF8DD46E4B7CAE8EE2144C
-:108850008450DD45F2E3C61C7D9FA4144A294E4195
-:10886000DCF03E49F455D9BB15B8BEAA8BEAAB760D
-:108870005A049F9C0E6849CB88C52B23F27C4BC8B9
-:10888000DE2D31FC875EAF146D93F87B8A513B443B
-:10889000BE3CE5B4B685BF930AFAB84EAF86084031
-:1088A000BAA728415EFF94DC5208E2FA27A1792694
-:1088B0007D59DA2985989FFA772F0AFE13FB459B8D
-:1088C00065FECE6FB30499C5346F94F953ABEF1FB7
-:1088D0002EDF91787E51B7E9F8610A95EAC3A6F3D5
-:1088E000209D3FE6F39DA7E83F929CEFFC24478F35
-:1088F000E78AA028E1BBBCAE4BFB2EEF238A075CC6
-:1089000074F8080971F91E1D470DFABAEB42B25806
-:10891000378A82EAA36FD76112002FF3A91E714232
-:108920003880F542DE463D632D54DBA88EACBEBDDB
-:10893000E9309DBF2DD5E35A339E90A1CCAF657A27
-:10894000DD50CDE6C4FBB53A5F6A4D7C69F04B263D
-:10895000FA44DC7DA9F4A1E5FA0EE1A0769795EB47
-:10896000B9CFC1AD5C7F55DFBE85E959AACB6F2079
-:10897000BD415ECF325C0FE9D3A5D26B96DF3103E8
-:10898000E757C01509F29B9D7949F22B057539AD62
-:10899000AFBF4BE4B5FD5D25BC2F61E0C5FCFC2CF1
-:1089A0003D8EBE66938837CF765439291EE83BAAA0
-:1089B0007825C47DC5B14FDDF4FD4DF93E19E89C25
-:1089C000B4AFB3625D10EDE59EAEA13769E807CAAA
-:1089D0008F29EC372A8E9587528AA95FEE2CE53ACB
-:1089E000132D93F2009C87FD70DFD1A127CA384E6A
-:1089F0009F5949296AD3D17227C50B7B40EC6F4838
-:108A0000C72A337BE2FCCA7B3962BF614DEEBB0FE4
-:108A1000939DBA66B795F783AFB1465FA23C6C4FA2
-:108A200097E26DC27EDDB145AB5348DEBF91BC1409
-:108A3000761FEE5E9145E735F59D56D5CEF4DE7D89
-:108A400090EE077749DE61383EB0EFEAD16DB44F62
-:108A5000B4A5C24BEC35DE579EAE3D4AF5AE90E76D
-:108A6000E4BCFD9ACBACEC5FCFE43BFF752EAEAB24
-:108A7000D6B76516D9E133BFDBC375157D6D12E43A
-:108A80004AB48F7CE849AAF739F3F4711B9D075764
-:108A9000B51FE7BA8DC1FCC1D910E28EF3F6561BA3
-:108AA000E537F55B8C7E0F7F8F52ADC7510DDBDE56
-:108AB000E67E2DE50184C7CD7248C3FF3CB4EF19B3
-:108AC0003E1F6ED825EA3E2EDCDF26F17D03EF8BBC
-:108AD00074BBB51C34C6FB7203EF7A7D9481F773C7
-:108AE0003097EBB496EF7A84F1BD44C7B7B96E0AFC
-:108AF0002DB0AD2C4BE82BEDB799BFFFBB43C7F7AB
-:108B00001D17C1F7A85C1DDFA36014E1FBFC7451C5
-:108B10004F77FEF81027CD7FFE08EFBE7E1DCED921
-:108B2000EF1ED5E382FE88C567BB3236AEB7E313CE
-:108B3000FE0E3170B4DF467527B33A3F6679CCED4F
-:108B40003C3093F87D1DF8EB887FD7753A558A83C2
-:108B5000E7F6087B36A7D3CEE713D741B885E4DC28
-:108B6000B7FFF1960CC2CDAF056E0C3BB74CE7EBEF
-:108B7000B5653F9845F97BADEE0FFBBBEE9CC57626
-:108B8000671C1453BC3747FFCE7B4E58B7439B132B
-:108B9000F94EE7D424B7864E3BD79B5C0B3D36F2AB
-:108BA00067D7EAFED3EC27FBF29C2CE720FAAB61F7
-:108BB00038BE6E97A98E52E9617AFA3B6C7CDED59D
-:108BC00060F2BFD372AD09F51783E1D32CAFDB722E
-:108BD000757FA2CB6B6E54D431CC7945F6D2F94374
-:108BE00057647519C50B06DFCCF2EAD24AD3BEEE44
-:108BF000F7125ED2E37CA37F83FEFD5B586D75C5E3
-:108C0000E7EDCFE75AF473CED04F2B709D7749D064
-:108C10004D38C4FCE6867229697EB33217C73F5FC0
-:108C200078FBFA71F1F98D6FCB708AF71E44BB5255
-:108C300051C9F53BDD7C5EA8B4CEA573B0C02EABA8
-:108C400097F29A4087CCF14060973D64C179AF219B
-:108C50001C215DD59DD2D58423CC1B5A72D13ECD2B
-:108C6000A32D651C37AF03E3117C6EDECC8F197F1B
-:108C700047868A75F72B5A4EB23CC2C81F1A3E1758
-:108C8000F1AA71BD01ED008D6FD0BF4B6B3FF8D7DE
-:108C9000A2E2543AB7FDAC6821C5A9B9227F31E2FE
-:108CA000D528C6AB257ABC4275174B85E860E973B9
-:108CB000F7D9C87E1DA61FB6A0FA49D5BF86F261B6
-:108CC000D50F8D3FA240436A613D6A209D221CEE74
-:108CD00095C4FECDB356AA0D81A69787705D60EF4F
-:108CE0006BE21CCAACEFBD8BBAD95E9C5FE86A240C
-:108CF000BC2D2FDBB206230C18BDFF75B637A37F42
-:108D000067532D6A6C5D4DF4DD1DE7692D09F17225
-:108D10006F47B38DF7A1E3BF1B2E19181FD55F64F2
-:108D20001FEB79935D41FA39DEED3B22ABB42F8422
-:108D30007CFC657E3CBFF478A8FD600AFBAFBEE317
-:108D4000AE10C5FD7FD1F17846DF976F9A24333F8F
-:108D50002C93453B7AFF3325245F92871FEDFDCE90
-:108D6000FDCF5CE1E37DF490A823DE9158875D1F81
-:108D70004EACB336F81AD0F98A740DA7EF950DBA38
-:108D8000F62A3D6E6F123D92A4832C2F8B9498E7A8
-:108D9000069E95ABE3EB48713DB791DD3B69E88BEF
-:108DA00012F5901F7E2B5763DC34750AF95AF68949
-:108DB00016DFFF1DB15F63E5F70FB83F235847F794
-:108DC000CF173BB9BE013E0FCEA5FE3D25E2F7030E
-:108DD000EE79B97644FC3E1D48221F0F58A35CEF84
-:108DE00017386E61FA02C7FB3D435D6417B7CCA428
-:108DF0003ADA6B757B71B8C45943380FD27B736212
-:108E0000F32CC915E71B40EBCD8D7D5F69AC773541
-:108E1000DCC87C58ADE3EA3FF4BC1EF3A8F3B949C3
-:108E2000F2A8C1E2DF0B74EBF1D3F9E9DA89EF21A3
-:108E30000ECA8F2841CAD7F7BC911222FFDFB46F48
-:108E4000D99F281F0EBC69078A43EED9BF6C04D78F
-:108E5000E1FBFD57923D39BFFF8E2BB98E5112DFDA
-:108E6000970689BE5C8AA75EF5509C54BFEF55AE4D
-:108E700073ACDF3BFE518A9F305EBA96AE631CC373
-:108E8000F82B3F56C9F8DB73B432B3940807AF939D
-:108E9000E6AD3FA270DD63FD91CA17E7525C736CCB
-:108EA00006C74F46BC5441F938C54F478626C44FC4
-:108EB000A979827F7D075278FF438212811F189A19
-:108EC000809FBAF63F709C5187F62E1E47C673C529
-:108ED000790ACF332C4FC74F58F2313E768BB6AE5E
-:108EE000630FAF6FB935CCF26EDA6515F7DB446B03
-:108EF000D44907212348FC78912EA11CE6D842854D
-:108F0000946FBE502CF20DB33C9EC813E7852F9C86
-:108F100014DF19BF30DD3F22D9F7C6419821F27026
-:108F200049E777BB7576B2EF7977E489FD09772653
-:108F3000249C4B1AEDA379425FE6D8C43E95F9BE56
-:108F40003FCFF03FB08ECE634ECCB5AAC6EFB7E4AC
-:108F5000A1DDBD1E8C3FEFABF3B3E89C4BE4D50025
-:108F60003D33C91E7E9BF6F929FE9A24FCBAB1CF87
-:108F70003F6F333C20F6F96FB5925D30EA4BE6F96E
-:108F8000CCF157F5D534CF8DE8DF699E9B6627DE9F
-:108F9000FFF645E2AE0579BA1F1F0EC3455EE172CA
-:108FA000923F38D76555655E476868B2EF0B0DFB99
-:108FB000737895383FEA42BB486DD3A8D779DFEA8A
-:108FC0008503279F4C67BB9A0225C8E2ABBEFC9382
-:108FD00027D93C4D17F4757E02FE0C799DA53CA067
-:108FE0006CA0BCEECCB3E8DF259DB1F1F926343E90
-:108FF000649107FF2EA969D4672DA44F67F5EF5E32
-:1090000090BE227B9CDD3F9BF731DFBF6706448328
-:1090100078FFC0283BFBBFFA99129F1FD447843FBB
-:10902000AC9F2FFCE1F0F6792C97EFA05C7C5E36CC
-:1090300013AF515DAE21EFABBEEC9B69E493748E30
-:10904000D34438673B9DC56D7DFBDB2D7C5E897EFF
-:1090500097E2C21B2625CA6D04F81FC8C6FB37CF8E
-:1090600096BCE84106C8FDE65BE7B1DC6FD2BF8F76
-:10907000B998DC7F9BE7FF691EE97D77FF77C62003
-:109080008B5E18F54111F9D7864170BD55E72F0C5D
-:109090008D3E4DE765DE0BE7E97F7F3AFE3CBDC4C0
-:1090A000E3DF924776D5F2A5FB0AA0F97A7EB942B2
-:1090B000223901EBC5607AB5439F7F479E2ADE9334
-:1090C00025CE8746E9FD17ACA142FE9EA2ECD2CE8A
-:1090D000019B9E7D7E2CD9B9DE0347C6DAE2E47A95
-:1090E0006605DA07F237FB0EF1F78731DC5974DCDD
-:1090F00029DC4AD28DBA1F4DC4E119C221D9E7DD5E
-:1091000087AEA7FCF16CFB4D599216E767F79E708E
-:109110000F8B9BF7ACFEBB1898B70DFF766A3C9D92
-:109120000F309D67C3623ED4FFE1378D89BFDF6C8E
-:109130007C67C7787E7064239FD31B785640E0D944
-:10914000F83D8C0BDF55DA80BF7B0CEEB7737D45A5
-:109150009F355A941EA72F1F1A7244981566312BFB
-:10916000B9DE75226CA8E273024CDED74DA6CFEFB4
-:10917000C2B2A80F6DE4BAC5698DE025DC4AB0998A
-:10918000FB13668BF3F229D02D135DDF8428B73EE5
-:1091900050156A67508519B6931C6199C2ADB6F631
-:1091A000834EC257C4A3A4BFEF10A5A7C9E4175BA1
-:1091B000BF02EF1B78C5C1180425FD4E3F2B5FD8B9
-:1091C0007FAF53E863F4ACF8DD936F400FD33F55A6
-:1091D000E9667A53352D83CE4B763FB742A6FA9790
-:1091E000FDA04549CFBC998DBCFF169D0EE1ADE9B0
-:1091F000B1F54EA2F5AAB1FE940560A1F54AB04BB7
-:10920000ACBF1132E87C6C3244F83D5711C1B8DE76
-:10921000E9A029D4B7E517EB7C16F95B959EBF59F9
-:109220001C41AEFB49CD17B8762A2139AF92B7B6AB
-:10923000C38FD0F94CA958E744BCCEE7388D82EEF5
-:109240000BFE3A5FD8BB29106639430DA82FF28F69
-:109250002BCC54895F52C463A1DF13BB54BEF67993
-:1092600080E977DF1EEDFD6165ECDCCBDB99C3F5B2
-:10927000D0EB254B5426BA1C85A21E3A0261FE2E65
-:109280003392F87B67C5F9375E9E4F7ECF2FBEC302
-:1092900035D775EE086DE5BA9B0541640FCD5308CF
-:1092A00070DA13AB03B09684F8BE95CED955AE33C1
-:1092B000ADA07C715FB6FFF2FC6CAE371DC6932982
-:1092C000A1F1D5A931BC2365FCFB3B4E486D257B44
-:1092D000D4ACD7D30655B75ECF54C4EBD0D0CEF3C1
-:1092E0008F4828A2AEFBDE2A517F7AEF90FD5CE723
-:1092F000DB23812A15D0F9FF7EAE03A61F86B316A5
-:109300007CCDF97F96FEBB0F25FE372696EA461EDA
-:109310009F6B3E95CAF5AFCA0C9F4675BCE67AF1C5
-:10932000D296F10FF5705E6AD06BAA1357BC7CFF22
-:109330005EDDBE363BC4EF0049ABEDAA348DBE7F87
-:109340005FC1BF63D54CA141257DF7BE829FA73A7F
-:10935000662A02ED4DF3DF44FC32FF2E15C2ABFF4F
-:10936000059A376D38EFF72593C734431E968175FC
-:109370005228875B49BE46DDAD516F4B80A0753BDF
-:109380007DE277F054C409FFEE1F42C94EB8F4994C
-:109390007FCF43D4FFB6E8FC47BA7670DDA7437CA5
-:1093A000A76D7CCF6BE69B81DFFF02B9D77EA25011
-:1093B00053000000000000001F8B080000000000A8
-:1093C000000B9B22C3C0F0A31E81F9A551F9E8F858
-:1093D000049A3C0B0303C34F205ECC835F1F2E1CFB
-:1093E000CB8260BB883330E88A3230E801F1142048
-:1093F0009E0AC49F81585B8C814107887381EC3C35
-:10940000207607626BA0DA2F1C0C0CDDC20C0CD38B
-:109410008078A130AAB92F1821B41217038329101C
-:10942000333263B77FAA1A03C3011D043F5D9781DE
-:1094300061AB3E797E19C5430F6F7344E51FB5429A
-:10944000E57FB06160B07742F08F5991667E35500C
-:109450006F8D136EF9A36EA8FCBD1EA87C0B34F9AA
-:109460001D61101A00FB3B7C21B8030000000000C6
-:1094700000000000000000001F8B0800000000003A
-:10948000000BED7D7D7C1CC59560F5C7F4F47CAACE
-:10949000471ED9235B323DD2D8964186B62DDB32AA
-:1094A000B6714B06472424194CE20802B9C136AC08
-:1094B000B3E1B809770B0EC1D1E8FBC3B219192F7C
-:1094C000311C81417CC4102E281F9775127219031C
-:1094D000C9CF9BCB651D4238270739A1F8D87C6ED0
-:1094E00074EC19CF5D08DE7AAFAAA5E9D67CD986DF
-:1094F0004DFE38F9472AD5FDAAEABD57AF5EBDF744
-:10950000EA758D22BA48EC2242CEC2DF6642DE7294
-:109510001142D6CC96A976234B5A68F934317AE9B0
-:10952000A34BB46CBB40CB15FE4951D009B92C9C60
-:109530002644242436F1301129DC509D4246A28471
-:1095400078F46D55C43FDBAFB3ECED2224BBACF82F
-:109550007BE9F9E1881EA0FD3DB5B6D3A4FD0C7DE5
-:10956000A5B5D36C9E7D5F0B8352FC1A08C5A686F9
-:1095700090FEFAFB89182664908EBD8CFEA7DE93C0
-:109580002071DA4EC90E137D05C085105EFDFA0903
-:10959000F166FA7CD0453A2768A91E4D657D14EF27
-:1095A0004B9FD35649941E8F6C8ABFA5754F44CCF0
-:1095B000A4808EC841ECF734A50B867AAFE8590D2C
-:1095C000F4503A365648CFC662F43C974A013D976C
-:1095D0001DD557E6D3A3D6317AD4BA1E9CA7D31192
-:1095E0004A4FF442E8F90CD233C8E91974D0F34178
-:1095F0004ECF768B9EDA01A467A09ED2431FB9EFAF
-:109600004991388557819E00C0D9E919007A9A0B93
-:10961000D0A3FE79E8F92B2E6F49A0674D797A9295
-:10962000404F4D05F4F8D344A3CF3D4430279AE78B
-:10963000E2E5E17C5CF1F5742445FB1DFE9384F3C7
-:109640004C576464DB8A59B8498ED7F7A203914915
-:1096500090AF25F74708ED6FB85E407867BF0F10F1
-:1096600005E1B53AB31BFABFF888BDFFE17A86AFD2
-:1096700005FF7B3E8FBF2712B65BE08F0F437D78DF
-:10968000C9374802C671A5231AB48BB276FD4BD6F2
-:10969000764EFA0BB567F40CEF4DA13CABD9CF2059
-:1096A000BFFEA63E4D745AF71C4910E0BF1261F888
-:1096B00058ED295E845C0E64DF699A0C3F4216D235
-:1096C000794ADD994DD1F162E9DBD538E5C7706D96
-:1096D0008F0A740FE9073B416F9D8E29448A025E11
-:1096E00085F960C9C56632AA36D0F9EC7D59324693
-:1096F000C85CB8140857CD6C5DF68B24DB44F0EFE2
-:109700002C017A1238FFFD4BEE47BA15A06B05D03D
-:1097100095243A7DFE2D2E3FEEAFA708C895AAA747
-:1097200022A91573C71902FE3743AFE9C8B63CFA40
-:109730007F6ECD2F9D57C7FC225F1E206636057CAD
-:10974000F1D8E7CD2AFF9EF3FDB2BA14F2B7DCF8E8
-:1097500073E967E3FF1DD1B11FA2A623F1C02C3E20
-:10976000C3AEC91E906BBA268D2728C8A5749CB6B7
-:109770003C7E3BC79BA1534EDBE4F81B9C4FC39E32
-:10978000E9E7F3FB73E2F35D0EF75DA26169D17562
-:10979000E951364EB9FE7F022CAE0178C7BA92531A
-:1097A00036BEDFCDE12F7BCE0E578C3F9F9DE14F24
-:1097B0002A02F268AD47F833E713C24506FFFC6B97
-:1097C00009590EFF8736F9C3CD9377C2D27A259C0B
-:1097D000380DED6F23898BBC8D74BDB8125F847218
-:1097E000AB6CBE85FD12BFF6C6255CEE24D4036CBF
-:1097F0003CDA3DA1FD07787FB2D041089567772B11
-:10980000C98C50D4AE925ECD0A949F070931166878
-:1098100079FBFA14DBD7D76B992DB09F6F90292174
-:1098200074BC2AA279A004F82C850BAEF11B742419
-:10983000E2261FAF8A17901B4F0B4979AAE8F8ADB3
-:109840008A6D5D78CC0401BD108890AC2748F58DF9
-:10985000100823FEEBC83A86BF2E407FD5B2DE2D1E
-:10986000D371A498688CD3A7551BC9FA1D7972A827
-:109870000B4C7EBB63A208740D50FDEFA64B325813
-:109880004FD73BAC8708B5370AC8ED8C7ECF49244B
-:109890003B8FF69B13487635ADFBC9FA046D97767E
-:1098A00093F5A7705C628C1790B3ED029B5721363D
-:1098B0007DF62CDA0524F33EB40BD2B88E9558DA37
-:1098C000847D403583861BA6FDED7B995E938909D7
-:1098D00072128AA5B355F05E5F1A057C17C492E434
-:1098E000F566564EE5E1ABFA5311B49FA24B859E47
-:1098F000BC7DEC18959FA93C791BDACBEC80FEE887
-:1099000000D7339F44FD69BDFF04E79332499101BD
-:10991000BA7425D320CC95EB21A1B09ED8C9E98596
-:10992000BF2BD7DAE5559ECFE5950EE19609CAD74C
-:10993000E0532403F8524E3E7F33AD5FF2A24A4615
-:10994000A87C35931322C8CFA5641A4B8368129460
-:10995000AB8881650B8963F987362AF7B4BCCDA43F
-:10996000F2DE80F2FF51818EFFFBFAC4B2207DEE61
-:1099700089A52E87FD85CAFF76784EE5440079AA31
-:109980003649C1FD3224B0F53A266B1E801B3309DF
-:10999000EAC743426F0AF689216E270D79886D1D4B
-:1099A0001FE0740FF132144B9049985F3A2FA0D703
-:1099B0008F456FC575EC96597D80CE0BCADD26B6F6
-:1099C0008F39F150615E569CFF3C6CFFF3CFC38032
-:1099D0005053701E06611EB60B4C7F2ABF62E39780
-:1099E000A00FF7E99DDD8F22FF9553E7066FD1BFEA
-:1099F000D6A137D7713DB7814C2F96A91EB9DD9DF1
-:109A0000556401F1FE02E0FDD6CF4E7C02E82193C1
-:109A10008965B04F51BC1F16504F26C9093ABEFC8C
-:109A2000B294013F45F45DA3264AF82944A3FA4CB9
-:109A3000E5FAAC01FEB74E7BC33757FF2E9DF8AB5E
-:109A400093686F10353102FA69535205B9E8ADDBFE
-:109A5000A6821C0DD6D13AC84D445185CB68E92762
-:109A60001D207F96FD3110D931140D83DD63AC8547
-:109A70006EADF1B7441244C0E78979EEA8FDF92F25
-:109A800061FD6B898844E95332EF5381CE7E6D9B33
-:109A90009AEF7729FE4444A1723808E3C1F8AEE496
-:109AA000F1680BE84FB2BA07F4B99624AB41BE2374
-:109AB000ED88E796BAB80AEFDD9155C4AD038BE3A4
-:109AC00068570D84EDFEDC60DD1DE456844F92374F
-:109AD000FC73ED6BB73F4994BC7D02C691F2E6D9A9
-:109AE0002D27B340971429AC77FF07977F518FE359
-:109AF0007E43D29F37552AF72E2E03AE08F9997070
-:109B000069DE3C85F3F61D3A4F031EA3B3D0BAA419
-:109B10003B88BD5F4320EADACAFB9DDD6FF9BCA735
-:109B2000D70D4DE2BC07D230EFBD54EFE3BEFA6A69
-:109B300020F30425A17B53F21178EF4AC9A4278CA6
-:109B4000DD34C13E779774B101F27700F846378E65
-:109B5000D12E15CB912E0DCBA1AE08969FF77DEEA1
-:109B60008B93B4DD9E945B73831CA4EF7A16FAA3E7
-:109B70005E777C04FA0DD3FEA15F59D59ED0A0CEAE
-:109B8000F61D578C95378A8C8F55A217F16D119958
-:109B90001DAE1313E525AD95F6D3AB5AED766EC029
-:109BA000F0CEAE07FA9FAFA9DA56F7E80B6DF0CE0C
-:109BB000F5F26391E90D971C2746339485F5F85922
-:109BC000414238495A390DF687BC4041BBA05FB0CD
-:109BD000EBED8745B6DF3D26AA4867844CBF7096FB
-:109BE000F2C3A58968F704430D1359E04F8D622C29
-:109BF000A145D035A95517188F84E5DF4DE6ADF3A3
-:109C0000A7043326FE05F0690EFDDDED36B9DE272B
-:109C1000B2FDEE2C5F2F92DBEC043D13A1624850A5
-:109C20003EF447810FA26FA3D144F9D01F5274F0C4
-:109C300087FABAC582FB8E930F52D58D11D08F4E05
-:109C4000BE7F97CBD1339CEF9BDFFE30EA89FD9A34
-:109C5000D891F103DF4E74809EEF6B114590F3BFF6
-:109C600018FE39E8D833C3BF193A906F7D61663763
-:109C70008F6A547E603D8799FCE824DB81EF0D4AB2
-:109C80009730972E27FFDE6BFA2CBE5785C478A637
-:109C900019F09B8E237E1BE582F8FD6BF1DDC2CBB4
-:109CA0003F835796E165FC65E0F594901887F57D54
-:109CB00080CBEB01795205BD10B3E4C6C7D6D15CA9
-:109CC000BD24D8E49DF6F325E8E75EE887C2DF2BE4
-:109CD0004FDBFAB1E002C007B62EE26C5DC87FD65A
-:109CE0007561E135C2F1D64986C9755361B97EAF58
-:109CF000F1B2F6D31EDF1504F44DC81F47FB7B817C
-:109D00003F9E057EF5D6283AD83FD451C2FD1A9B16
-:109D1000EA797E52CDF608C0F707B6A35DDEEF8A7A
-:109D2000A39D7EBCE61BE6CD94AEDEB7AB88DBA080
-:109D3000FE80EF8AE33AE8C5E312FA6BBD6F372E77
-:109D4000481698671FC4C728FE5EC00FED6A65C637
-:109D500008077C7BFD54F1D17EDE6C2619D0A72E3E
-:109D6000BF1901BBBB77856AF420549C007F7B7CC4
-:109D70009F684D34CF6DEFF30F7C5ABA74761CFA9E
-:109D8000279C05DB97EEE1E0C7237D82ED7D413C1A
-:109D9000CAD55DB3750DFBA7755D85AE05F36CE3A4
-:109DA0002CDF292D4D32EC9BC46BC0FCC7E21D3D5E
-:109DB0007F043EFDBD847AD0C99FBF93125E69CDFA
-:109DC0006CDD154EE0BC59FD5D5D23A31E95EB488F
-:109DD000C62DC0A8F10EB06F7BEB448CAFC9FE6DF1
-:109DE0005525EDEEBACAEC6EC2E31E963CB4FD8A70
-:109DF0008DEB3598FE0E90490271952AC2E21A2128
-:109E0000A20B04DB1B421C83251B319E12F6BCDB1C
-:109E1000FDDE88FD0AE61839EB3B877E65DA6FE3E5
-:109E20007BD06F197C3DE421EC97AA87F0D979B3F8
-:109E3000FDBA22497C48DE3E7B565A4B5813FC4BF8
-:109E4000A07CCBA281EB932C0C1A4FD0A23F7C8735
-:109E5000CD9FFA88D4608B9B2ADAC0A785202DEB92
-:109E60006E3327F3F483737E3B6120F02FEB7699FA
-:109E70009315E80D30BB0BC5A5069444A61BF6EF61
-:109E8000C57E8C2312398971E141A17A15D8CF168C
-:109E90009C5CA76401AF408B99027D31384F34241C
-:109EA00003FA1D3D01FE0091AE311225E24B729D79
-:109EB000FC9B7C7AFEAD1408239E3CCED55B46DE2F
-:109EC00007BA4A9F4F288A9128E4CFA42466BF2866
-:109ED000DEC2EFAF54DAF74A6BE6F22D0DBCA3CF2A
-:109EE0000743D4E5BE8C890FC8815CF7FD93C0871A
-:109EF00081DAAD9152F4128DDA39797E91A19823ED
-:109F000052693C0E14C283F8A9F0AC2F310E9F5F4A
-:109F1000ED4A83C53B4029C2791CB7CF28DE416199
-:109F20003ED3D3F0B7BF653C0B7134D7CD7E13E67B
-:109F30004F328F1089C2FFA85622422BD4BDAF8B5F
-:109F4000389F1B0DD4574DCCBF33E93FA023B851E8
-:109F5000B1ED5BA03F67F6AD28C8BFBDFEB4648F0E
-:109F600067F6761D25BF5C328B3F7D64168A17CB62
-:109F70004AFB44617E5457C48F43545E08959783CF
-:109F8000D46FA44C2169EA3742FD00F51B09FA930E
-:109F90003A967D5D4D58EE83A6EBE1FC2C39148D8D
-:109FA00042BCF4F1C82D14E410E80E3C57F1B6435E
-:109FB000FC7CC4AAD32702D4F939CB0F7BFFD80687
-:109FC000F198110FAB1332DD66DAEA520FC4FB478A
-:109FD00002ACFD2F257F3B9C471CE2E7484436D569
-:109FE0008FE6F9FF39C98574800DC4DAFFBE1BFA0C
-:109FF000F3C8BC9EAA477C66EA948F808F4765F5BC
-:10A00000BABEC5D83FAA003A5EACEF2236DE126671
-:10A01000DF93E66D65F8D883F27F3D1CC201CDCD9C
-:10A02000D570A84C14C320B0DD1C0A71BC2BEC8782
-:10A03000C809B6DFF1B852F17553665FE378949BB7
-:10A040007F027E29C42FA81E4EC1B83F2DBC4FBF32
-:10A05000DBE31E729D1B5F94D6E9944C59FCB7520A
-:10A060004293693D604E64A3B41EBC269BC2E55B6F
-:10A07000E1B8BF93341E0F4DE0FAB7F82C6BCCEE6D
-:10A08000B8D2318FAEB089E7921E3F5B7F95E2BBBD
-:10A090001EC6C9EB873CD35E1B0F146F571317679F
-:10A0A000ED2DFADFBC0EEFACBD46FF0B99D5B67AAD
-:10A0B00055EB421B7CC068B0BD776917DBDE9FEFB4
-:10A0C0003C5DEAA0A3D1E21FAF479C74562C77B247
-:10A0D000CEF7B914B31F67EA7C3F2E577F7B99BD3B
-:10A0E000CEFA75931BAA987DC3EC987F43388C13E6
-:10A0F0000F234FFF4A00C7EABA2810CBBECD36CD9A
-:10A10000EDBF57FD1CC6E1CC5E9978AE981BA74BFE
-:10A11000B52731CE96EA716BBD618CBB619C6D0F2A
-:10A1200035E4DDB4BCCD95D80DF27BC6B33843829F
-:10A13000D06F721DC4AD7B1DF104A73CC51EBABE15
-:10A14000E07999550E75B1F89F5557EB0AE701DC98
-:10A150002DB3F3FAEFBB1277031EA01B09C66909E2
-:10A16000AE0397CEF6C763D1ADE4D7E8FFB3F331C2
-:10A1700085A44E36527AD2D45F1BD1816EB64E86FC
-:10A18000A25BD5187D3E1612B94D378DF653BA6DC8
-:10A190007E2DACA72A791ACFEDAA6285F1B95716A0
-:10A1A000F9BCDD54923EE77CDC048156DA6EAC5E8D
-:10A1B0001091FFF562E6098847D589B8AEF79BCACA
-:10A1C000A370D4BEBFA5FA7A8CA79B8A28211D59FB
-:10A1D000B5D03AECE776532F8F9F1EA8637EEBB184
-:10A1E000B6375438AF3960B4633E809CFE11B61F59
-:10A1F000E4FC4EAF9CC238F96091F3971E99F9F9CF
-:10A20000BD016F67A6E0FB20BE4F47DB9E7F00E8E5
-:10A21000A0FAF709F4CF48ED2E4A87666AAB80DFD3
-:10A2200063F5A6F86B90AB4D22CA5910E272129CEE
-:10A230008BDAFDE7B14D229EB3A635BF01F6FB696F
-:10A24000F34D821B91ACD5C2F962D5AB1B34DC2B2C
-:10A25000A9BD539B67E7576D4CAE83F9B2E8729383
-:10A260006B0BCE87B0784F02F879D72AA2833FE6EE
-:10A270005EDC91FD02EDF7CC7AB706AAE0CAC09584
-:10A28000D9EF803CD16D05FC6477D8CC82DDE4E960
-:10A29000F4119DBE0F4626D08E52231231C1AEFA64
-:10A2A000BF12CE17D51948977C68FD89CDB4BDB2D1
-:10A2B000495C80765933DB6F34FA0FF61B3566B78D
-:10A2C000AB245716FBBB77F2513C57561C76954C86
-:10A2D000F2E0C1EEDAB4EDC38D05F481554A934145
-:10A2E0003CD725D28D25ED6CFFAB9FFC8717F3F88B
-:10A2F0003E253BEC746EBF59FD14B3DFCE74EDFE0A
-:10A300008717A92C275C2C0E2A2BE66F605D4EF177
-:10A31000F3C53147DE4DC2C5D6CB19BE8E6166C1CD
-:10A32000DF06FF18F8D577D576E66711C3E6C7D004
-:10A33000F57E46CEF3B3ADFD2E6D96F62766F35A45
-:10A34000FC9E5889BC966BE584EC2A91D762ADD708
-:10A35000E14D2689D0F91D0D914C0FCCEF6693ECA1
-:10A3600004791588D1A331F869EB1C250A72781598
-:10A37000D905EB57970D3887EC6FFC1075148BE3FC
-:10A380002B87EDF2516E1EF738E67191CB6E87BBCD
-:10A3900048BC2A1B853846E47AC0637F5831603D4B
-:10A3A000BAC41B77EFD0E7CE2359C7F4862B9C2580
-:10A3B00085C6B5F879BBCB5CE68238BB629C4C8025
-:10A3C000FCB72BE8F73AE16F72F13C962891C13E59
-:10A3D0004BC13A81F5DB61B2BC31414B3E6820FA9A
-:10A3E00071DBB956EC2DCC677B4822C9791B09B9C2
-:10A3F000CE15657AA66D3BB37B3E40042904F00977
-:10A40000DCBF6A4D4DA07D9361CB2ED36E8E5C9BDD
-:10A41000A727AFE3F239FB3E11F9A8EDBD8BE11997
-:10A42000E076B3B63372ED8A02ED4385F5E407B802
-:10A430005C5FE7E2F6446A27E605F5EB37C681CFB5
-:10A440007D9B4D6317682D9011C847F1139B7D4C80
-:10A45000E5FB3AE0A7153F92B53896963D506CFE65
-:10A460009D76802B62CF3BA9F4DC3676E8FA92E346
-:10A4700038F7672BBF0D345F3E9F5C9C0FCD7CBDD2
-:10A48000CCDA4B69BEDE0DCC079214330171494919
-:10A4900020367B6B8CCB8BE465EF9D7850FFF94EBB
-:10A4A00058A752D044FF9AF85B98DD261BFAB505F1
-:10A4B000F0B7CE391FE379BCB1F48770FF1B0DB53F
-:10A4C000E3BED7A795D61FD6BEBA995CA342DCAE31
-:10A4D000BFB8FE18CDD71F4A58B4AF63EEDF53FAAA
-:10A4E000F5427CB6F814E1F1D2DEC0F648C9B8A056
-:10A4F000E37CC550CC07902FC5F9F685F3E1DB2846
-:10A50000CFABDBDBFFD2F33C0FC1AEAF5716D5D7D5
-:10A51000FFC9A64FB9BE7E0FF9FFDCBBC1FF4AE3FE
-:10A52000309E3D927E6A1E55F1720AE919D60FA639
-:10A53000301E03EB1BEC80741BE62B901841BD080A
-:10A540000D41DF797413F9E6E57126A5CEBECF483B
-:10A5500061AFAD1EE94C11C857837E816ECF1E05D9
-:10A56000C7B5F84D6D16CC27B3EC4B584EE08F14A1
-:10A57000CB4FB34A2B7E03C73867719FFAEC71E06B
-:10A58000EF693FC1FDA138FDF671221F8997D64FB3
-:10A590000E78E297F5370A9C0BCE6D279337F2F4CD
-:10A5A000DAFF71E813F3C8CD9DA847896840FCB273
-:10A5B00037B29D2428DE0384E9932128D7433EC97E
-:10A5C0002A0DFCDFEFBB74D65E67FE9DA8F238BD96
-:10A5D0005E99BF7717DD870AD93F4B15661F9FF934
-:10A5E0005CF20F9097901A1174D8DF4E75E5D07E0B
-:10A5F000DA915DAE405EDA72653EC2ED381455B652
-:10A60000E4ADCF1D849DFB5344947C3D6AAD3F2552
-:10A61000ED7E1EE89C4AB3B8C654FA9FF15C7FEA0F
-:10A62000B09401A64E0D5D5772FD9CE27ADB823B31
-:10A63000755832A1BFD490905942DB9F92CD60C132
-:10A640003C009261E7C1BC7E4B5AB2C9E599BD0995
-:10A6500005F4CCA92E55F8259D9B5B814E8AFF8E73
-:10A660007454019FAC1C5DF314FB7C5A74F643BE1A
-:10A670004274367FA73FFC26D27B9A3E974AC4930A
-:10A6800046B89EE80F17D6275E7EFEEA75650AE794
-:10A690003D38E8F535D9D7A585DF20CFA718D418E0
-:10A6A0005E831111E761B0AEB41EEBE3F360C1F558
-:10A6B00047D8796BBF1C572BC1C7A5D9F129368E56
-:10A6C000BA71A203B6F92A92E8688F227B5F8238BA
-:10A6D00002860E75F09F9E3A762BC4816FF69B42E0
-:10A6E000041E4E67BF43EB0BA8BF03F6A966668442
-:10A6F000C52D90D72911881B3F947C33FB1AF8A3F2
-:10A70000D4FF817A484F86DE077A289610605DED87
-:10A7100007E58F9D7FB0B7AD99AF3F5AFFD440FB9F
-:10A72000168843CA24CEE319A20EF97AB8F4C5E21A
-:10A730007A02B4E759F76CBBA2743AFC2237D956B7
-:10A74000DAFFDECDE053F41FE89D050E3F2BD46900
-:10A75000B7BBAB1CEFC7B8BC16F32BDFAD71E693EC
-:10A7600097543897555B442D03F0241982FD3678B1
-:10A77000A34CC08E9FAF6BDD10E22BC7F77D84E545
-:10A78000B9C11711F9EBEF4985D9B18B6E7F5C80A8
-:10A79000FDE93478D92BA19E330AC9AFD3EE1BD281
-:10A7A000A7309E38404E7434823DBF4BC4F3A4FDA5
-:10A7B0002D0743F9EDBFC7C7999D7FA2CB6BF1541D
-:10A7C00016FD79A5453461DF3ADFF977FAC9E5E688
-:10A7D000BF76B7DD2E3ED779F93120BEA6FCFC5FEF
-:10A7E000E838D6BCCD5D1F4C6F2EBAFD458CE38C8E
-:10A7F0001AA5F5CDDC797B09E72DD842CC42719CB6
-:10A8000057F83EE6CCEB53499218909FF832DB7F25
-:10A81000A4C6B591F112FA478A39FC0FDE4FEE1645
-:10A82000424EC07E2BEB65BE879B3824D37DD3B7C9
-:10A8300067C3217935E4679998E735DC65E2F399D8
-:10A84000F9778B1C5F81886BB95ED1F1FCF3908C3A
-:10A85000F68648CE421C846844B7E48E005CC7216B
-:10A8600019E3313ACF23A0A0F3A11D41BDB4129248
-:10A870003D6BF09C1EFB818E581CA693D569439CB2
-:10A88000279769225E725ABD83F2739F87D7755EE0
-:10A890000FF1BAC6EB515E2707B1EE53681DE2F225
-:10A8A000AEB486752FAF4779BD9AD743BCDEC0EBF7
-:10A8B000C241ACEF53587F237286F5EFE5759DD703
-:10A8C000AB795DE3F5065E27E36C7C37ABC37E882E
-:10A8D000751FAF47797D1EAF8778BD91D78571AC65
-:10A8E000179B3F6FCC44FECECE7F07E31B21DCDFFE
-:10A8F0008C3BEA9DB3F079FE687F972EE49F1FBAE8
-:10A900008AC49F56B9999E996E8B639E12F5175211
-:10A9100053F9E78E91C2F26EF27633E7E6610A5799
-:10A92000307EDD5D705D548ADFD6F3C4EF23FF4ACD
-:10A93000F8DDE0B6D63DF3CFA7DB0CC4D3D99FB387
-:10A940001DD85B24EF9CDE2B675210AFA13612FAA4
-:10A950003B2ED59ECF7A979B9D7376BB593E6B2F2E
-:10A96000C76FBA8D9D3FF42FF166C685B971C6BF1A
-:10A9700071B378C20F2C3CD509F47B7C39BA62D113
-:10A980000F627ED470ACBD4CFEBAFCFFF2FD656771
-:10A990001CE49FE11D1DC7EB2FCCA7BB66F4CD8D3A
-:10A9A000A9290AAB7AE873F067B470A42E3F6F9AB6
-:10A9B000BF278228A17E799BC259F92212F6CFE2E5
-:10A9C000C5752C5E2C71781C27CABE633057C13EFA
-:10A9D000439F37F17184B9FD3ADB65DDD56CBE3834
-:10A9E0003E567E8A449EC37E66F091E3C82FE7738D
-:10A9F000C843D6FC17FEFC42EB2EBDC8786976FE34
-:10AA000052AEFD17B9BCCC91CF22F3FA1FDD969D53
-:10AA10003261423E902547967C9DAF1C5DB09CC044
-:10AA200086D4525C4E522489EB46069773E5B9CB27
-:10AA30004B0139C9E6C3D7A8217E9E6FA0BC507CCC
-:10AA400064945B8DE153B32A8CFD09B0C697410F26
-:10AA5000BC0E7CA0F45EA286381F589CC20BE78C0B
-:10AA600079ED297188AF20095CEF33B8CD2A5BE717
-:10AA70009BDAEB18FE84F7EFC097F6A7E6F727916D
-:10AA80003A879C33BC3FA6B2F9A5F0F89DDF9CF154
-:10AA90006501F195483C25D2769FE2F04EFD659523
-:10AAA0007B397EC322D9CDBE938C93FCEF2A7DAA3D
-:10AAB000C8BF7B64EBCCA99F5C2057ABCF5FAE2AAD
-:10AAC000D5EB356AE17D87EAF92688F715DB774E05
-:10AAD000AA33FB41139FB7739AF7DF811E5A333BAA
-:10AAE0009F95E27B091FF75CF13D3517DF8AE4ECA7
-:10AAF0004DAE272AC56FF379E2F79203BF774BAECD
-:10AB0000DFE6FB51A5F87FEC3CE5E18773F95BD10B
-:10AB10003A12D573E3EFA7CE13BF5F38F12BB26EB5
-:10AB20001595F12B45987CC8FCFCA552FCBACAE3EC
-:10AB3000C7F3C5B6F69931B4D7D01FDFAF6EED4B72
-:10AB4000C9B3F89984E9F5731DFFDE8AC7FF509FEA
-:10AB500029CF8EFF05F543B6F165D94061AB74DCB2
-:10AB6000872B1D37F5511BDDCF0C7DD436EEF9F266
-:10AB7000FDCB158F7F938DEEE7866EB2D3ED373028
-:10AB80009FB8D271BF739EEBFD371C5F9FAAD9F6A9
-:10AB90008162F6FBDBDCAEBD45D56C725C0CFE4D14
-:10ABA0006EAF7CB042F853BCFF460B9F32F09FE182
-:10ABB000F87FA642F8DF717CD65788CF0FF83A2C81
-:10ABC000B67F7A39DF7DA023F3FC9A0BCD5BDAE503
-:10ABD0004E081E38E7FC7A177E27F8A6AC6A10EFFD
-:10ABE000241D04ED71CFAB8171965792E2FE7F2256
-:10ABF00025303D8CF12D57D8B09DC7597E972CC775
-:10AC0000CD42E76D210FD37F826674B2F5AE10C8D6
-:10AC1000432A06EFF3148EBF549169CC3F21117E75
-:10AC20008EF4F6757AC17302398E792D92A69071E1
-:10AC30003A4E5F68BB9E9FB71CB3F08998888FA27D
-:10AC4000317C14D9300BE529D77BD8BC5AFD58FE8E
-:10AC5000A1109926EC1E07865FBF27DE0979E2A9BD
-:10AC600090827CEA0BD8CFC7AFE7FDBC9FD3D7E774
-:10AC70002A9D27D63EBF15F3957A5B59BE924E0C9E
-:10AC8000CCEFECF397BED760B48BC5FF4778FED30B
-:10AC9000107C3F0ADF13C3F7A3CBA0FD57F13BBCE9
-:10ACA000D3CD62C9FB7102863DCEEE6BB27FCF631E
-:10ACB000C5E53DBAFDBB1E77C4FE5D8F6BBE8C79CA
-:10ACC0005D7D7E763E500E7F2BEFDD821B9493AA36
-:10ACD00056904F19DBB9803B62C7F7BDE31F6BEF9E
-:10ACE000734D6885F07AB7F8562CDE30436F959235
-:10ACF000CC30BD61CBCFE8E2F2E5AE5293A097A98C
-:10AD0000DE2DF2DECBDAFBE3981FA246E23AC6A3C1
-:10AD1000F93EA0C27AC8E3D3E7AD75E915AD7C630F
-:10AD2000CCEB107413CF1F555847C2DC7633F36A4F
-:10AD3000C9FD9FB644709DD4A8B84E047D1ABFEBE0
-:10AD4000728EB3CC631EF4C0F998C7BC0F4AD73BD0
-:10AD500052A2D07A19F3303DAA5E13D7D5067455A6
-:10AD6000D1EE71E2F12C5F7F7E0BFF9489F917958C
-:10AD7000E2FF7085F85BE350FC9F063D4BF1FF124C
-:10AD800094C5F07F8AEBA36AA277E39EAD333D4B77
-:10AD9000C8B57A7E7CDDEB65FD56733D45489B2D3D
-:10ADA000AFC7C5E9AA949EA3965E2B438F352EA507
-:10ADB000E7453E1FDF2B351F2F707ABC5EB66FA9AB
-:10ADC00087E33A5D9A6469917999E278CCF7F2B8B1
-:10ADD00052AAED9CE4EAC715D231353B2FAFF17989
-:10ADE000F945293A5EE5729596C8FA53B09F365AEE
-:10ADF000F90BDB6CF3B288F327EDB6E6A5DD362F51
-:10AE0000A1739C97DF5648CFA2D97939C3E725575C
-:10AE10004ACEF2E0FFC4E1DFE1F068272EF2FEB196
-:10AE20000FCECB9679E2A2B766767FA3709277CDEC
-:10AE30002CDCE7878F5B706E84EB988153BD79FDC6
-:10AE400091D4EB7D70FEDDCFBFFFF8C170E02ADE4C
-:10AE50002E88EDAE61F4D07655F9FD3F3BFCB2D5BE
-:10AE6000FF3C80EBDEF28E0517CE875BE47DC78268
-:10AE70008BC073E1F04C7FB5F9784C79FEA98FE572
-:10AE8000EB38F2BDB4CAF21D5CE104DEE7504D02BE
-:10AE90006989960332BB5F21458DEA27207FD69DC5
-:10AEA000C8920AEC2E5165EDDCD4DE82F3E3791A08
-:10AEB00039E6D1C10531C861FAFE4058467FE00E3F
-:10AEC0004FA2C55BC3F0C43C80D7983DD6ED6FE17F
-:10AED000711486D798EF1343D09F46F182FE3FEF5F
-:10AEE0000B1E03F883F50AE6F31EABBF13EDC4B1E6
-:10AEF0006E99C0FBB1AB15B413EF7B2D80FB70BF17
-:10AF00006C5C8FF90FA6A283DD7897F79D9390A7CD
-:10AF10003CD95DA50957203D887F4A24F15EEC9F0E
-:10AF2000D99D7B28FE900F8C5B17F4DBC1FC18C207
-:10AF3000F39CEFDAA263DE8C4ED8FD4D83AD0AE6BA
-:10AF4000298DD535B4C178F7B5AA6877DC774D433C
-:10AF500037E673B77A31F7ADDAAF0B90DF135CA742
-:10AF600010F810A43AAC7783DD1958EB853BBF4845
-:10AF7000751D1B2FB08CE03D7F2E928EC768191C6B
-:10AF800052F01EA7FBAED996DD09764D2BCB5FA6FE
-:10AF900084BD145B4B889FB392483F24808F6B1114
-:10AFA0003BCFB7E639989E695FF21C3198A9102E05
-:10AFB0005B195C6048C6FCE4B270E90AE13215C274
-:10AFC00065195CD9F37B9E4FA9D27F1087F338F3C4
-:10AFD000B1FDA5BF8B3BD77CDD31AF3DEFBA5C7BCC
-:10AFE0002B4FB71CBD70983983A7541EDECAB32BF4
-:10AFF000F6DE35FFCE087C97365873372FEF616544
-:10B000002D7F5EBB2782F745D6F2F7B5F7E0FD91BD
-:10B01000CE7EFE0BD7C74D245E721EAA39FE6F503E
-:10B02000DC219EDD2497C90770E6FB39F49E2AA730
-:10B03000DA71DD5EC3F28B66BE9FACE3DF8D906498
-:10B040003C86F12C33B872FEECFA716DFC3EAE1FFB
-:10B05000EBBB493A3FEC7B49879C38E5C2EDC84FD2
-:10B06000B9503979E53D9213D79054D1FA71A52B97
-:10B0700084CB540897AD0C4E19122AD22B4ABA42EF
-:10B08000B84C85705906D7BF5EE1FBFA703FC4B774
-:10B090005C97ABB67AFFE55EFBFB0D7E5B7D608D5A
-:10B0A000BDBDB2D6DE7E60ADBDBDB28EB5377C878C
-:10B0B000AE4AC52A5F27FFEB3CD749935A1A3ED0C8
-:10B0C0005A665DA99A07DA57CB3A81FB85E87E95E7
-:10B0D000E1FB56C1F8CF561F5BFF577B35DBFD7494
-:10B0E0007FE97436F918BE16BDE5F0B5F4EF3F4AB6
-:10B0F000DCEE2A92771F029D538B8F17417FC78EFC
-:10B10000BDB510ECCA675F5F87F79AF67ED0CA9B21
-:10B1100031301F523EE9FD38E8AD67E97E0BF93862
-:10B120001321E3F82560CF044402F63275A3F05EE4
-:10B130008F678FCA687FF43E57DAEF7FA68BE509E9
-:10B140003D0D7E3FD5FF47F8BD5B4FF27BB71EEF4D
-:10B15000D2B11CEF6AC2F7992E03EB0F77B562F9F3
-:10B16000509789CF1FECEAC0FAE1AE38D6EFEFEA8C
-:10B17000C4F2DEAE0496FBBB7663B9AF2B89E570F3
-:10B18000D71E2C07BB522C6FB36B887FBF96C6F2BD
-:10B19000D2EF4C8D5C0276925FC4EFC08AE1BF6251
-:10B1A000C21E77B8E4883DEEB03C638F372C3B6C11
-:10B1B0008F372C4937D8DE370E5D6C7B1F4DADB213
-:10B1C000D52FDA73B90DBE3ED96EAB2FDAFD7E1BDB
-:10B1D0007C6D629B3D1FACF3061BBCB67187ED7D99
-:10B1E000B0E5AF6D757FF31D36786FEC6E5B1DEECD
-:10B1F0007DCE87BFD6D7C0E281E1111B9CEC3F68B2
-:10B2000083DB35DF7CC4B706F2F183685F3EFBAABF
-:10B2100080F95DF3161BAF03DFC92B12CA13B99275
-:10B22000E5C3CF6B485E06F7941139B9EEBA40F921
-:10B230007BA4AD788F146C4D80BC9E795DD0C1DE4F
-:10B2400015827B964D1690C7DDA7936402E2923C6F
-:10B25000CFAC7121314DDACE4BF5091E2E926476BA
-:10B260002FC62D45FC8EEA312181F926D46636FEA3
-:10B27000B30679F4CEFD77C3CF7787F17E04B4CBE4
-:10B28000DB0EB44E0D51F8F1150ADE7733075FC7B8
-:10B29000FD76BFF5313F78DF5E16AF6C7C7E7D8337
-:10B2A0000A76784B621EB8AA337A23FB33FC4E2908
-:10B2B000A01B6BE10A80402C4D763603DC0913E2BB
-:10B2C000B614FE6BBEBCF1028F9F4879E9F3E547E7
-:10B2D000128DF0D9C4F85E162F1D1F5E2ADE4AC7F4
-:10B2E00069C82E1797A2BFF324BBD77D48176FA557
-:10B2F0007AA1E1505CDC5A806FE37F2A1C4F9DF4F9
-:10B3000049D87EBC3B83F7CB79B3DFC47B38AD79BA
-:10B31000F135EB6202FA3D9C10C15E1BDFCBBED360
-:10B320001B17A20B239CCE6E079D8017A58BDC0AF2
-:10B33000E5434971AB9F3D6F0CCCF60BEF77C2FB39
-:10B340004C4ADCE2AF887FA6179E3FCEF9772423D4
-:10B3500096E49F7EC2047EAB31CA3FBD14FFEE6708
-:10B36000FCA37CBBD53F975F33F0295D5CDB9CC7BA
-:10B370006FDE1EF8726B01BECEF089B64F60FBA87F
-:10B38000B89A8F0B7C68A074EF2CD44E88F271327F
-:10B39000F671281F6FCD8BA7C39F3F2F4FC48287A5
-:10B3A000BF8EB53C4F91D2ED9A0CED84EFAFDB9A96
-:10B3B00013780F70BF5FC4FB85FAFD5FCDE23DFDE2
-:10B3C0001A41BD29CB66CF4FC22C0EDD23145AA7DC
-:10B3D000763F01BE4CC9FF9EACCF6FE5E197B197B8
-:10B3E000F8BDC212BF575891E31D51B69E8D6E3203
-:10B3F0001B5F9D3BFE41A45B8AD8F7DFBE5DF67DF7
-:10B400002FA6DD8071ECDE7065DF0DB973CCBE5404
-:10B41000383EAE9C8FDD779CF3209E666E1E969B19
-:10B4200073212CAFC82DC2F79B72B558DF986BC43F
-:10B43000FA865C14CBCB7397E0F3F5B9E5586FCD82
-:10B44000ADC6725D6E253E5F9BDB80F535B9F55864
-:10B450006FC96DC17275AE0DCB55B90FE0FB95B9D3
-:10B46000ABB16EE4AEC37279EE5A2C9B721FC7F774
-:10B47000CB72D7637D696E27D697E46EC67A2CF7B8
-:10B4800029AC37E63E896543EEDF6319CD7D1ADFCF
-:10B49000EBB9CF62FDA2DC67B0BE38D78BF5FA5CA2
-:10B4A00037D6EB72FBB0BE28378CE5C2DC7D58D6B0
-:10B4B000E6C6F0FD82DC0358CECF3D86CF43B947C8
-:10B4C000B1D4725FE2F7453F856530F7352C03B99B
-:10B4D000AFE07B7FEEDB58F7E5BE89A537F7029634
-:10B4E0006AEE1896E5E6A9DCF74F9BC93C9B5C6CBD
-:10B4F000CA2DB4D5374CDBF7EFF5BFBAD8565F3756
-:10B50000B9CA565F73F2725BFFAB4FD8F7EF95C7BE
-:10B51000DF6FB71FB2F6FD7B59E606BBFD7078877B
-:10B52000DD7E48FFB5AD1E1DBAC36E3FA4ECFB77B0
-:10B53000FD1EFBFEBD283962B71F761FB4C12F2048
-:10B540000F3AF2C9C76DF055E6D336F840EB571DF8
-:10B55000E72B19A6FF8D6FD99EAB4DCF173C87897E
-:10B560001DBA1ABFDB3F5D27F27B86F8BDADFC7EBE
-:10B5700034E77C56733D302FC7FCA7305F7735B07A
-:10B58000EEF2F29EC0CE88E6D919F31AF4AFBC48A9
-:10B59000EB67162B4637AD5B7686055FF6772B1487
-:10B5A000633245F174BDEAC67BE78460A70971B5D3
-:10B5B000BBA604DCEFAB17119E1FD1D1C1E213C4AF
-:10B5C000BA4F07EFF719ACB7DEEF7C1FBE8FB2FAA8
-:10B5D00071FFDEAD10471D7459EFBFF43E8C7378D8
-:10B5E00058FDBFFB770DC0FBEAAA8908ECB3FB8AC4
-:10B5F0009C6FFE4FBFC2EC7DBFF923FF9AD97BA69B
-:10B600005F09275EF2D3E7B7A9898BE0CA6EB8E776
-:10B610001EEE71DE2A9B3F01B86B65F3653FEE0BB2
-:10B6200076FFE15AC87D5D83F702FE0CDE4BC1A3B5
-:10B6300098DF5FFD817BF0BEAAC100C5C75F1C9F7C
-:10B64000FFE69766F61B62ED370D184F457B7020BD
-:10B650004AF0DE8CC1503C05F7F9A5BEA792270C35
-:10B66000A03BCD9295787EE2E072DD920BDBFE444A
-:10B67000483C0B717C5FC2AF83BDE6272730FF22B9
-:10B6800048A6B1D48826D8EEDBB6E8AF67F4C3FD90
-:10B69000FF7E3C87378F4E629C3549F8FDD56FC1E0
-:10B6A00073CA9733FE35C5F97295740FD1E8F80F58
-:10B6B000537B12E87898307CF773FF5426C97823BF
-:10B6C0008FF7E4DF2321BFFA4D941B2BDE234B1BA6
-:10B6D0003BF07A177E8F4307FD07F6614DBC74BCC3
-:10B6E000C7796FC3B9C67BC20167BCC78FE7C9A75B
-:10B6F0009B4B7F0767C57DF63797BEB732C3FDBE4C
-:10B7000087F979EF43FCBCF741EEF71DE67EDFFDDC
-:10B71000E0F7E1BD5ACCEF3B007EDF32382F366DCB
-:10B72000DF978C16B9FF251A12B89CED41FBDEC7D6
-:10B73000EF2BA29E2BDAF35E6ECFF7FA7BE6C3FD0A
-:10B740000CBE10C9809FB0FBEA71FC7E969262C06D
-:10B75000FD00B7FFFA8DF9FF8ED6631162BBDFC91A
-:10B76000DBECB82FA1DC3872C6847E7DD46F481B19
-:10B77000C5F973CEFDAA19E239AF7ED93D3FD6BDDA
-:10B780006DD4034F81FCF9806E0DE4EADB38CE699D
-:10B790003E0E91361EC7FB0C2F934929399833CEA4
-:10B7A00039CADFAE80E3F7291CF2A7CBA407EFA9C3
-:10B7B000E1DF43EA7EC39B1F5FB1E4B0B799C51FC9
-:10B7C000BA5FFF18FE6EC08B355B17E6FB7FD6773E
-:10B7D0004ABD2D0C8E5A7DB8CEF7779FD43FA9CFA6
-:10B7E000C23D65C169A5E3194F5870A30C2ED06204
-:10B7F0008885EEEFFB22DF4FBEEC3353819AD9717F
-:10B80000F59E8E1B504FAC51F17CC6D9EECBBEC419
-:10B8100050202F3FC1EA3FBF3DC85789F6E952ED9E
-:10B8200017DFDDF17352BAFDE1C09AE2EDEBEEE80D
-:10B8300078B00CFE99C2E3A71EC173A608FBDDB267
-:10B84000EE5AA501FCE57D6BA8BF4CE7E1C5155B91
-:10B85000F15ED9BED02B7A2139A2FD7EA9145E9467
-:10B860002F9D65E8FA5AB9F64269BABE5D86AF27E0
-:10B87000CBF0E58552ED295F0F97C1FFBF16C63F9C
-:10B880007511E01DA863F1BAEE7ACA57F0D7D6B0A9
-:10B890003884B51E1E1F2BCAD757CAF0A59CBCFE04
-:10B8A000E202E5F58D52E35720AFFF5486AFE5E4A1
-:10B8B000F5AD62F28AE7A4E72FAF42F0C2E4D513F8
-:10B8C0002CCDD772F21A2AD5BE0279AD2D857F050F
-:10B8D000F21A2D34BE9B508508F67E333B17DBDD14
-:10B8E000C6EE237335B17DD7F7EA17D13EEAA3FB45
-:10B8F000D3BC56D8A7A7EEBFBD65765F76EE3BCE2C
-:10B90000FE9CFBE6EDFFFB49DC37037CBFB3F0F1A7
-:10B91000E8CE7E4ADF6771AEE37AE17798F27EDFA8
-:10B92000E2E2C7EDDFAD5EF878F67DDDDB42C7A76A
-:10B93000EF091D7F0B9E233E83E7884B0F5DE8B820
-:10B94000A5E19B1E727C8F7B8E76C02D41BB1DDADC
-:10B95000B0E76B8FE0FD23BC9F06D9C4DFED93C930
-:10B9600095ECBE9321962F24EDF9CA23A756E7DD67
-:10B970002B4574313F3F481A9A78E4541E1D39888C
-:10B98000F7B0F832E62DC6B4CBD19E181C2D6DC78A
-:10B990007E99EFE3CFF0F38BA7B91D7B84E72D3EB3
-:10B9A0000976EC3238C760E717E360C7629E632B05
-:10B9B000CF7334799E630796CFF1F3876F751DC6F9
-:10B9C000F747BB32587EA3EB08965FEF9AC0F75F4C
-:10B9D000ED3A8AF589AE2CB38757DE897A66960EE2
-:10B9E00067DCAA341D971DB5C741564CD8CF312E00
-:10B9F00039623FC7589EB19F632C3B6C8F832C49A3
-:10BA0000DBCF311A87ECE718BE26FB398647B7C76C
-:10BA100041DC91F73BCE41B639CE41ECE718F54910
-:10BA2000FB39C6A2DDF638486DC27E8EB1A0F36E3A
-:10BA30001B7CC8ECB17F17DF6A8F836C9AB69F5F5F
-:10BA40006CF8D583F6B8CFA43D0EB2EEA43D0EB28D
-:10BA5000E6C4576DF5D5C7EDF18F0FFB122F823E6F
-:10BA60005D9975C641264598BF9FFBD9F99FE55F53
-:10BA700053F81F80FEBC4AF2673750B97FEC28BBF1
-:10BA8000DFFD31C2CE3309F90FE82FC833FE8289BA
-:10BA9000FA47E2FA67ECCAA957C09F91F7337FE7EC
-:10BAA00076615D56CDF7775CFF28E4AF6B4973FA9A
-:10BAB0000D65FA970DF473E432FEC8DC7E99DE9AC8
-:10BAC000BDDFBC25057954F28C3FF201873F523728
-:10BAD0008CBF6335AFB43F32679C73D4436F058B23
-:10BAE000F8C31111F967F923FB5AB83F42D87752CE
-:10BAF000567F961E1A8B945E87D63D2D63DC6F9120
-:10BB0000FD85CFB1AD7C99B196CAF2BA7F1064E7DA
-:10BB100049149AFBC3FF5F3EDE4DF9B8BCAA88BF4B
-:10BB2000FA1ECB4731B873950F197406C6236F19E7
-:10BB300084EF985C50BF7CB6AEF07AF0DEDBB642A4
-:10BB40005EC81EC2CE75C8CBECBED57278C436DED8
-:10BB50005432FFC18AAFFE496379BBB1D69B306FC7
-:10BB6000F2341DA3D47DDACE3C0B299C841FDB83E9
-:10BB7000EFD80B9EF7FCB49AE593C73A3F51D26ECB
-:10BB800071FE1E58CC2C7DBFEE30C7FF85D716A0A6
-:10BB9000BDBA6F88E963B973C5F3208F8F833C1AF0
-:10BBA000184F5197035D4332DEA7E6D709C6051744
-:10BBB000FB49A63B0A7C3552708F17FDC373E5190C
-:10BBC000F91CB2DB51672C3EC54BF3B5ECEF19AC59
-:10BBD000D7312F4DD649520BE1FA216F84113F5CCA
-:10BBE000B783AD06FBDD3B8A8FA6CD6DEFC4CBB925
-:10BBF0003EE55D57603CA941B0D6A7CF803C9DD3C0
-:10BC00007E7FC97BDEE6F47B8EEBF19939EBF19A0E
-:10BC10009E9FC2B8A32C7E44F6D0BFBC734E677FF4
-:10BC2000D67AB4EA2FBC76177ED732387A07BBAF04
-:10BC3000B88EDF0B36CAF46331BCAC78D0016E1F0E
-:10BC40003E71A8BD07F8DB47D74DBE3E5AF2B71F7D
-:10BC5000F126D8B96235944F1E66DF6B2F7D6017D1
-:10BC60007FBE039F1F68DDD68EFECF21620259C1C1
-:10BC7000F5A754F67E4A43F8F0F471B81769299590
-:10BC8000378885DFBBB1C584DFA8AC0A89ED504A8F
-:10BC9000A393A877492B3197E830AE8CBF9FB33878
-:10BCA000451E057C168F2646403E499A18F0BE2A4E
-:10BCB0001CDF763585AFA282095756A7087BBF38AF
-:10BCC000A9E1FCC5461307AF06F86682BFCB45DF86
-:10BCD00063BD6EB786F93FBED1C921B8F79A8EC150
-:10BCE000DFD33A7DBF30C1DA074627D35BD02F9927
-:10BCF000799FDED202F70EB2F7F228A507DE4718C9
-:10BD00003E29327D02DECF0FB3F7CA28DB1FEFDDFD
-:10BD1000B803EFD3A3E3E37D532EFEFC31CEFF58EF
-:10BD2000E73B27601C2B1F2345E2B67BA99CEBDE7B
-:10BD3000FAFDBF5E6EC7FBD4455F3895771FC33EE3
-:10BD40007E5FB577D4BE3FFFB18AEDB3C7B89E29F9
-:10BD5000772F1B247A839CFF0B555919960080007E
-:10BD6000000000001F8B080000000000000BC53D14
-:10BD70000B7854D599E7DEB9F3CA4CC29D300993CC
-:10BD80009099DC840422043A814041512711111515
-:10BD90006D44DB066B7508C8FB11514BB4DADC90BF
-:10BDA00004921060B0AE44E43189A2A8A08382D28C
-:10BDB00096DA01B3145DBB4DAD456AD146D0A808F3
-:10BDC0003452517657D7FDFFFFDC4BE64E2689D61D
-:10BDD000ED6EBE4F0FE79EF7FF3EFFF9CF19C61875
-:10BDE000FB2A17FE5795C4A2058CFE285F99CAA2AC
-:10BDF000B698FCFC4C637930D7982F1F69CC7BC672
-:10BE00001ADBBB2F36947F7E1D631D4EC8487E1BF8
-:10BE100083543A7AB3AD6C3463B5EEE5943F7FBB9F
-:10BE20005E1E48C27C9E7CD28EE58F5555D8582127
-:10BE300063AB3C330605E1FB57F87779EFB4A19A81
-:10BE4000B1A895B135D5214A9BAA5B286D2E6222F7
-:10BE50002B666CED6831DC96C3D8EAC219D45FBD9D
-:10BE6000BBFFFEDAB0BF118C85AB6D946EAD96A9A9
-:10BE7000BFCDD51E4A6BAB154A37551750DA52ED78
-:10BE8000A77A0F554FA434541DA0745DF5342A7F52
-:10BE9000BEBA8CF2BBABCB297DB63A48DF7755CF23
-:10BEA000A7F4E9EA4A4A9FACAEA2F4896A95D2EDBA
-:10BEB000D50D94AAB2C8581AACE74A7F6619CCFFD0
-:10BEC000D12B5979A4B0F7BC5559E0F56480E578D9
-:10BED000C6925828CADC882FE84B61CCDE10623647
-:10BEE0008047E662F886F9AA10B342DE3387E7D7C7
-:10BEF000E138D0AE8AB100C28D15B0F076809B4D8E
-:10BF000009B159305EC0ABB21B92199BAE8D83DF75
-:10BF1000118E6A8ECA105F272C81EBE434EC8751B6
-:10BF200079FEFE8E8388D6311D91524C0B0F8744CB
-:10BF300009D291532A579A201D345915B1FD2A8FE1
-:10BF4000582AC078E7AAC4B009BA568AD94113E47E
-:10BF50001F2B14C34D307E73091345C46306E05193
-:10BF6000E8596FD2F9AD2C3A0EF05A3563104B00F8
-:10BF70000F3D1D3A5FECA147F82F2398D443AFF053
-:10BF8000DFEA50FFEDC7EC110DF50B77C6B52F8436
-:10BF9000F6FDD0D3C8C78CED0B362719E6B3DAD33C
-:10BFA000FFF8F9E7AFA775F645B7A72C153F43B8DB
-:10BFB000EBF9F4F397B1E860C6DE72CA84CFD46BB4
-:10BFC000EFF3040B69B82926A007298B859B04CCC5
-:10BFD00006D86C80AB19FED524F33CC2DD04486A58
-:10BFE000F223BB2A019682A93FC0C6601AA0FC2199
-:10BFF00073B0591E8FF932FE5D0E121D345F045D61
-:10C000005C8CFD6437042643FEFBF0CF4CC6AE0FBC
-:10C010005D344D85FCE7E6A05805E3AFF5727E5C24
-:10C02000E11B9B84EB7EB4B97F7EACD5F851CF9BEE
-:10C030009C0126403FB90DF258A4A3BEDA3DD8209A
-:10C040004E0B27E8F729A45F987F7DC30C391F5753
-:10C05000DD8E328B31AB9311BDC5D787F53E85F0B0
-:10C0600035BBF93AD36E2AA3346FE7245B19F0C3CA
-:10C07000E7C9FDE3AF316EFE76183292605E1F6A4B
-:10C08000F3CA7BED17241F3F1FDD3F5DE972EF7C94
-:10C0900058641D885FA98CE469DA4D419607EB5915
-:10C0A0000DFCE244B9F7E58D0D3980577583487270
-:10C0B000409F7FFCB826A5B34484F2D5071630050F
-:10C0C000C6377BCA985A88795D3E4718F6EF707676
-:10C0D0000470BD0E160A98A07F475550C5EF168F05
-:10C0E000CA90CE56675CA84FF2764D481411BEAB8D
-:10C0F000B2C4301328654EE4F76246F9E48CE702D7
-:10C100002292CD17309F09D00FFEDB84F05699881C
-:10C11000EBC8677E27CCCB56D01D10A17E1EDB1747
-:10C120004579602B61FE26E49F8C2301A45BF50E0C
-:10C13000E6CF27320F923C6252D086F22AB7650CC6
-:10C14000F1834D8908B8EE1F5882EFC5F28BC5C345
-:10C15000E5D8EA2F4D09E5EABF6A7231A90FBC396B
-:10C160005CBCFC73B3720DE91BC8B725A023B38B6D
-:10C17000CBF13679C6EF0B941EBED4CBDFC2458E11
-:10C18000EFC9E79EB7D0BCF36EFAF1205C4F5F7445
-:10C19000B04AA3AFF583B8DCCD9B7C6900E17D0E8E
-:10C1A000E6DA24F4AEBF609042F5F4BCE434CAC7CA
-:10C1B000AF3F3F89E452DEA97B381F78FBA7577D4C
-:10C1C0009E9F7B8DF6809867233D5D1F12492ED57B
-:10C1D000BA459602F9AD481F3928303BED17C17AB0
-:10C1E0006C6F9818E27B6B55A9A84279728E142661
-:10C1F000FAF37447519CD9257600E903F0ABB8D225
-:10C2000010EF13087E59C51101E9FA94A617E1AFA2
-:10C21000CE0374E6E34B46FE1EE182EF819D02975A
-:10C22000031E2E07CCCCAF5A717CD0881118CFF1E9
-:10C230008689BE331689DE0FF92459F4A3DC5C5BD2
-:10C24000BC321DF9CDE162A4BFE65FDD46F209E430
-:10C25000AA7F13C8D1A51F75A52F837C9E87CB5DB0
-:10C260001D1E498516835E18701C291C403DE9106F
-:10C27000983FE4EF1BCEDFB85F5B98D9FFA17E410A
-:10C2800061A4135F687F3B549A1FAE1BFAB5B25F7F
-:10C29000D138E7B47198E9D861846FD27724664ABF
-:10C2A000C01F7D8E63BAA55FFD50756CC1EFDB6367
-:10C2B000E8F73657B2BB6B14FCE3BBECBB5FA18263
-:10C2C000303989BECE813D81E32A367610F375CDB3
-:10C2D0006238117F7C5E3DFFF7ED80BCB59A5EAFA2
-:10C2E00079D75A4AF4395E0C5BA17E7BDAD4CCCE86
-:10C2F00018BED0E5706D31D70340DD0CF9616DCD0E
-:10C30000516581D253EF49BD9EDCBFBED8AED76B1D
-:10C31000E6F5928BFD623041FD27347E7AC611B876
-:10C32000CF35BE675C65E5B49B490E8DB73153824E
-:10C33000F53DE308D6B962F858EF3FB63DD26F3FFE
-:10C34000ED9B5D697DB7F7DD3BED2DD67FFB07FBF0
-:10C350006B9FB57CDAA601E6BF39F1FCD56DD82E0E
-:10C36000D9636148E7351996DC06C8AF196FF15BF0
-:10C37000010FEDA3A77A106F75AE234A227A827E51
-:10C380009FE86F5E0097F201D6F5EC00702D17FA6A
-:10C390005FD78BFDB507B81E1D002EBF1900AE2D4F
-:10C3A00003CCFFB789DBABD938EFE42C0BE9931A48
-:10C3B0002FC0D58DFC0070653DFCF0D8863EE1FABB
-:10C3C000FA40F436C0BADE1A002F03D1EBF101E0D7
-:10C3D0003A10BD9EFC96F47AB60FB86EC3797F0B07
-:10C3E0007AFDF25BD2AB39F5DBD16B726AFF72601A
-:10C3F000207A4DEBAFFDD7A0576FA2F95B9923A030
-:10C40000A2FD53C8F5F8FC1291F4BAB980EB5FC7EE
-:10C41000B127488FD6819E1A3C11F5F5F187961603
-:10C42000F7E8E778FD13DF5FBCFE5CFAC9E3CC8E6A
-:10C4300078D4F49E3E1FBB12DFCF8FFAB5E3BEE97E
-:10C44000B8491E16B58FE9693FF2318BC18EFBF6F4
-:10C45000E319F57B52318C8FFE0418FF8A89A857A7
-:10C4600077FA912E873FF86DC7EDBF7EC16663FFF7
-:10C47000DFD41E98950AF680A3C71EC8AD7A7EDB6E
-:10C480007B837BFAC995024C06BA91D814B2DB586B
-:10C4900003F36FC7E2AADDDBDE1BD7630F0047881B
-:10C4A000B89FD0C7313544B6BD17B38EF37398B675
-:10C4B0000FABA47D4F9E7C7112D2F1EAE6FEEDE255
-:10C4C00067343DBE53F3373D85FE264877A0BF094C
-:10C4D000D2C7D1DF04E963E86F1A81FE29EE6F6AE3
-:10C4E000427F9315ED0FEE6F5A85FE2648F7A31F86
-:10C4F0000CD25F6A7EB07DD5614A5FA8DE41E99EBD
-:10C50000EA08953F57BD8FF291EA28E59B8B7E4262
-:10C5100072A6671DDC3ECF93757F5DFFEBF8CE3EC4
-:10C52000E33E6274C4E82719B523D590BF289C69FF
-:10C53000A83FA225D7509E1F1A69281FD630D69033
-:10C5400077145C6CA86F574A8D74E5B9C6503F47A5
-:10C550009D61C86757DD6CA8EFADAC30940F9DBFEF
-:10C56000D0509E115C6EC80F29BFD750DF15586997
-:10C57000281F34B1C9507E69F70386FC251F6E322F
-:10C58000D49FD4D96628FFEED1A70CE5E33B9E33B8
-:10C59000E4C71DFEA5A1FEF71CC128CAC3A2E8413D
-:10C5A00023BFB04E11F1D79EC268FF6387FD7B2089
-:10C5B000813DF95F83F83ED6CA4691BD7B0EE459B2
-:10C5C0005311B6AF0CE1FE3A17CA9A14DC9A8705EC
-:10C5D000368CA1AF286A4F89E5876F260770A78F31
-:10C5E000F57DF0877CF95FFAFE75875DBD0CC7CFDE
-:10C5F000E3F2589555D207F1ED75BF50DE8E998361
-:10C60000B0BC4E2E9513C9851396E089583D11BFD5
-:10C61000DFCD0B24B3008ED7A0FBC5B8DC33F12AE5
-:10C620002CF7D8558705F483958F49C5F5E8FE9C0E
-:10C63000D51ABFD66B7C6A6597A8E8AF38A7EDFB23
-:10C640009869B2BF3F39150FAF6F2AD7BE488DDF4B
-:10C65000E74C8FBE8FE33748E144FA524F75799625
-:10C66000F7C66DFDE24787AF8E4793DC1140FD6A48
-:10C67000532A5985B3379C4C599C1EFED9EB1E3A60
-:10C68000D828CFCFB1C2D240EED7586FF9ADB40E93
-:10C690001D9FF1F5D655F37D5733E295CE1164CD4C
-:10C6A000DFCFF12B4E0CAC44F8A6C03E1AFD02A21F
-:10C6B0003FCA3A13CC7BD044237D25FB8D72D051E9
-:10C6C00060948392D32807CDFE4A16413F2D8CC338
-:10C6D000881E830CFDB6F81FF19F3C10DF5D121021
-:10C6E00062E87020FEC321BE1A3630BFFEA3FCDD17
-:10C6F0003E279DFABF47E36FE0689EAAEC75A49FB2
-:10C700008A891A0131E5877F81792F386C263FCFDE
-:10C71000E55F6C3BB405FDD113AD32FAA3190B1DD7
-:10C72000FA3594CF09D8CA30BFE0D8688B0FCA8FCA
-:10C7300064021178B0BC2C05E5C069264E433FDD8C
-:10C7400069F67ACAB81839B764B085FB7F1ACCC7C6
-:10C750003B6D38BC4AE753B787785E5FD7BC16633A
-:10C760007E2E9B912EC138731F34A3E4630B987403
-:10C77000BC538703D0C18F07CBB49E79AC72950CA4
-:10C78000E3D69BF9F9CC9217475B100F0BC6C9395A
-:10C79000A6A29E79DC3D98FB014F02BD29D69EEFF3
-:10C7A0000B9D610BCAE5137BC6FDE01286FD845725
-:10C7B00065A25FD305F688D21BBEB31B8CF31C6841
-:10C7C0001DF1F3666C25C1A3AF79483B844022FF7D
-:10C7D00079ED60C180C75ADBCFB675C23C03B51294
-:10C7E000B35F0679899F1FA9C792C3DB517E975615
-:10C7F0003ED1097050575AE55A48373A7EF62CD642
-:10C80000AF0284E1F9D3CEC10AF79FDA7D613C5FC4
-:10C81000007DF3DD19C9DFBEDFDDFFA47E5FC07ED2
-:10C82000D37AF7BBC4D669C173B46552E5344144C9
-:10C83000BF22AF6735070343D19FB8AF283A5431C1
-:10C84000D46BF89AF50E0BB95FABDE34B19FFECE18
-:10C8500068F2EDB73B1FB5A0DC3AFDD4BBD7E3BE11
-:10C8600068D1AF4CCC06F5CEEC4C6651B2FBC2168B
-:10C87000B45F17EE3105C2948F4EB8313996AF6B65
-:10C88000A9FF45CF26D3BE6AE173D6F07468BFF026
-:10C8900085136318C883332BBB0F0D45F83D2590D6
-:10C8A0001DCDD4CE3137C2F78512BBAD2C81DDF161
-:10C8B000678D1F4EFDC2518EF426EC38702BF51B90
-:10C8C000F9A1D91AA3C73A069B099F508FFCDBEA4E
-:10C8D0009342385FE0F3BB6174ECFC6A78BD27B922
-:10C8E0003F77E13E73D88EF3DBD16A0942BD653BE9
-:10C8F0003E21FABEE2D95D29088765FB4C06B9B630
-:10C90000E8D92F575D0C785E6462DDD3498F7F4193
-:10C91000F973015BB789E450204500B9B59444161A
-:10C92000D47BFE83A97F81F2931E13B3832838D969
-:10C93000F1BEE557980F3A2B991FFB37F2E1B21D74
-:10C94000272C382F5964DD59C0E8977D1AC397AC5E
-:10C95000777DC6BA2D286797451A3F3101BD2DDB7B
-:10C9600073FA2DA4BB6571FC7C12FF91D15B5F0A49
-:10C97000EE787DF9DA0486E7F43B601334A96F7D25
-:10C98000A9F3F7A25DE7B6AA30FEA9E73EDEAA0248
-:10C99000CA17FFF7DFB7FE14F7492FD965944BCBC1
-:10C9A0009EFA530A8B817F969B9F279D79F289C7B8
-:10C9B00037011CCEFCD94A503BF3EB0F7C0AC0FD7B
-:10C9C000CCEEFF48C7F3A5BB7E7DE510A4B3BBF654
-:10C9D0005E31A4BF7D05D26DD81A8BDF30F5AFEC88
-:10C9E0008371864076BF96C6E1E5D4EECF2D784EB2
-:10C9F000F499C0BA51FE2E8D7C6941FBEC508075D4
-:10CA0000239C5EDE73E2D0BD903F0D78B226C0134A
-:10CA1000AC7FA8487A253A14F5CBD23D377EEFD2C9
-:10CA2000624CCD7E05F1C4BA49DEF7C2EF1B80DF50
-:10CA3000E21EFCC6979F635F5810FECB76023EC78E
-:10CA4000205E019F637AE3F334FE63526F7C5ED213
-:10CA50000B9F8BB76DC2C23D8309FF7DE173C9DEB9
-:10CA6000EFF76B67E9F2612038CF17F8BCACEEC086
-:10CA7000B56EE4B3E71CAA87E3393C1DCACEEC3A95
-:10CA8000E74367C887E6EE5B110EDDBFB6CA786E76
-:10CA9000BFF0D76F12DF9DD9FB070BE21FFE528458
-:10CAA00009906717FE5E67905FCA6D70B684754F18
-:10CAB0007DAB1853D6ADFA097F943F047C48F80843
-:10CAC000DF304D41F91B4EA3752F0D73FE581A3EF2
-:10CAD000709330A637DCEBDDA276FED3835761225C
-:10CAE000E2F3DDA9487F7DE1535FBF8CEBFF2E941D
-:10CAF0003F66E4DFF8FA4B815F717FD40BBFE1033F
-:10CB0000FF8EE99956AB24802D7406ED04676FBC47
-:10CB1000F7C09FEBE76F6A1F57C7D187DE5E87D3E9
-:10CB200040FC3ED0FABE29FC96B815031DE9703CC6
-:10CB3000F545627DF088263F96B2CA6999C37AEBC3
-:10CB400033132B53870A3DF35D1531919C3FB5C3D9
-:10CB500044E733F1F262299EDB2618E74937B763D1
-:10CB600096EE3B3006E5DAA983BFD0E892D3FDD23A
-:10CB70009DEF5A544D3F8463E5731FE7C0CF6BF3BD
-:10CB80005EB63F717FCB767E92B0BF9352E087381E
-:10CB9000FF931D66A642172723A684710B5BDC66F4
-:10CBA00083DDB52A79C2D141B82F48495270DDB52D
-:10CBB0002B036FE2B9A8FABA99CEF999E4FFD00A2B
-:10CBC000E5B5C9490AFAF36A53E63225468FD7C557
-:10CBD000C149F294D1F99DE42E2BE67BBAB0E1BCB9
-:10CBE000D70C04113B6FD0BB59A897DE29FAC08C33
-:10CBF000EBFC6B9C1DF95789AD1A02FDFD5515FC28
-:10CC0000354AA2FD81B1FFE07D26A6C4F4BFD4DA87
-:10CC1000FD0ECE87FDC6CED02E33BD6417509E2CA0
-:10CC2000DB6AA6FDD732D85621DC3ED8620FAB9026
-:10CC3000DFF87CF5ADA897FEB6D5CAF05CE2E5BD9D
-:10CC40002BBAEE41B9F488C0D09FFEB75F547F86FF
-:10CC50007A79C166581DC893798EEEC7B1FDBC675D
-:10CC600087B25A68FFB11099809BD9AEB4E804DC52
-:10CC70008774EDCAF0ABD4CF8B4BB1DF33CF3AA87A
-:10CC8000DF33BF7993C639F39B64D26BFAFCC1DE04
-:10CC90005662F538D8DBCA053E207B3B260FE32CD5
-:10CCA000C23CAF2F7CA5C93C947F8B3005BA5FB4E2
-:10CCB0006F5000FDBB31F5A89F65D6EE9FF869FF68
-:10CCC000AD668AB4778A66223F2EDA611CFF3FDCAC
-:10CCD000DCAE5A66E99ECBEB873239DF76503B4BB0
-:10CCE0009A46AF5A797C7BBDBE94966BA8A7B75F76
-:10CCF0006A659589F8C0A5F5BB68C797238CFD7157
-:10CD0000BAED3D0EFF7EB7C0C87FC276DB29EE6C60
-:10CD1000B1253A3C15F8F6050B9B8FFCBB38253A3C
-:10CD2000DC05E3FD4A939B8B93200FDF33B57960DD
-:10CD30007DCC335BE719C4EB9217ED74AEB2E4859A
-:10CD4000373F437C9E421803C64EA5757CF653A020
-:10CD500083535B4C4C057B6D8935EA7B04F5D46EBF
-:10CD60002B6B43FE7EE915D25BA79FB38AFD9D53D3
-:10CD70002F890035D87AAF432D6505954E8CB709BC
-:10CD800088ADB86F386C0AD7C0D8555260E5B3B8D3
-:10CD9000BEC366DA679C9DC30A705F799665FA55D3
-:10CDA000C2BFF2A604E52B5E350B89E290CCE741C9
-:10CDB000A88F033E387F2D532095CE0FA37485A5F1
-:10CDC0007204CA5D930C8B2B243F01D9ED66B79F8B
-:10CDD000CD8374452A0B22FC98F39A0BFCF57B401B
-:10CDE000E9F2879521D86E521A972B73D20357A672
-:10CDF000917C71CAE457D2E854DDCBE7F9B990E4ED
-:10CE0000AF8179E59DBFF73684EFF2770525F6FC13
-:10CE10003C3ECEB34A52DE548A69BD248FF2E424EC
-:10CE200086703D2BF3B8BEB3739441AE18B9BCA65F
-:10CE30005A26F9D158EDA17475750153C8BFE6A7FC
-:10CE4000BC495BBFB550A53835E469FCB33ACB02A9
-:10CE500068E7E19CF2153CEE0F121D593D95E49BED
-:10CE6000B23919ED634D4E95CD83D4ECE4F03139F0
-:10CE7000CB083E162D2FB54C2778427BFA7E797A67
-:10CE80007011C2C39635D220972CEEB1867C2F78D4
-:10CE9000E9F8DFF57F053746706AACB651BABA7A61
-:10CEA00022C1ABBE3A40F9FF07B83DC0E17631C6BA
-:10CEB0005AC4C0ADD490EF136E0F03DFB863F90608
-:10CEC000E0887CC392FCDB13AC3F3E7DA81A17C7F9
-:10CED000D803D52D94EADF53FBD0DB9FA4713BA090
-:10CEE0008A056BCC74BEC5FD2DCCADB2AC093DFE40
-:10CEF0004DE651998279E455C4CBD12482DDF2B755
-:10CF0000EDE43736C95257AC5C5B7E9D3204E59741
-:10CF1000A9EA517662708C1F6D7A995D21B8FA0585
-:10CF2000F4A7D66A7AB3FE02FE8C7CB0A65AA1742E
-:10CF3000ADC60FEB357ED88078867CAD9F9F6F366F
-:10CF40004F63A417FF05F27C1F1F65B171262E7F6A
-:10CF5000246A067C938C54288D529CEF516B381FA9
-:10CF6000E3A80A19C5D1B98EDE43FE63C6221EF4BA
-:10CF7000A7B934B8B1FDB9AE99C9B43C33D73BCCED
-:10CF8000C4D39019EDF178B8D6FA0FDA707FDDD7F7
-:10CF90007C4ADE5920E0789FCF243431F72D91A3CD
-:10CFA00015B00E67B383F46ABABF321BFD7BEC98F1
-:10CFB00095E8D3E90F0AF362F097DE875D7767FAA9
-:10CFC000D57F45FAEB4459067AE88196617684F379
-:10CFD0001A73C483F26E8D8BEB0FA51CA0F0DD9E3F
-:10CFE00076AF687230A5D8C8EFBA7C95278F35D058
-:10CFF000AF2E5753A718E95C97ABCFA7717FC59C9D
-:10D00000F4B24FD2201D7C7E33F1613CDDE7C917BD
-:10D010009707DDA80798BF09ED35B419D18E7B5766
-:10D0200008737AE7FEA9B39D396D68E7C0AE80E466
-:10D030008A8AFC4078EA7EF92B68B74B930F2B6DF8
-:10D04000336CB8DE06A02386E77A403F08E07540DF
-:10D050003F9886807E387F4CA454A74F4F7A8E210C
-:10D060002ED0947748E4F1F222F99E25D8DF396179
-:10D070003CE9C0241BDA7B92D97F18E55477B218BB
-:10D0800041BD59EF9C610BA0FFC6554C78FF2CB9F0
-:10D0900022BBBF3827B05BC86F2B3BFDEC388EC37B
-:10D0A00018F96D4DF25886FBC45DCE8E24DCB7585E
-:10D0B000D345C3BCE6A407BDE931F9D138BA862F00
-:10D0C000EC7697D64FFC7817A56B7ECB2C95056236
-:10D0D000CE2DAA74FA5654362586BF57E64F6518EA
-:10D0E0007F11CFD77DCAADEDDF4E6ED56687095F64
-:10D0F000E67879E10639EEA45415659CB777CD8FB3
-:10D100008A88AE2E4DC7FDA1B3ED821D72796E02E5
-:10D11000FA3A3A7208C5675ED033B06B2E243DB33D
-:10D120007122B747343DC3F5D3D96607E9A7B37376
-:10D130002A299EEA6CF31005E9EEC0BA4BC6203CE2
-:10D14000E69E6F640ACC6FDEF94994CE6FF939A57B
-:10D15000152DAD40E48CD5AC9DB76E26B43BF1B037
-:10D1600089E283BAC2E3CE5441BEABD9CA4C304E39
-:10D17000D7E63BB3D12FDE05E3A07DD5B5399FE8D7
-:10D18000AB0BE046F906637D8C0B36015E2A18C7AF
-:10D190000BFC2F80F5E7BE626A4D642755ACB706DD
-:10D1A000129DEF5C286F496CB7D5E23F33F07F9555
-:10D1B00023105E25EFDC938DEBD5F97F452AC8233C
-:10D1C00084D73B5696C81F7F79FA9573912E2F4FBF
-:10D1D0000F2CE578494DE85FEBA17F3EEE0911EC9D
-:10D1E0005BC24B30E506839F95FB314F68F62FB34A
-:10D1F000F5519EA2B59713972F69FEF8D0FD0CEF5D
-:10D2000029549621D1EBFB691383FDB480FBDF1B0E
-:10D2100028FE599F0FD8A944C70CF081F2658EE60D
-:10D22000EF01B87FCF02DF4FBC6212903E7AE8294F
-:10D230009882768BB0E6BA95BBA0FCEF87F9FE6CBE
-:10D24000C1F90D24EF8435A3374E82EF77BE6226F5
-:10D25000395FD374C9FA5B00BF9FBE66A2FCFCF3C2
-:10D2600076AAF7D1FDFE8DB740BDEEDF99C90EFF5E
-:10D27000F4F09514FFF891D9E827983084F3F1F38E
-:10D280001A3FCF3DBF86EC0FBD7C6EC36C8B4274E2
-:10D29000BA8EBECFC5439B4C9CFFF7FFAD44C2F393
-:10D2A0001C46F7149E7FE8866B57925E1B4BF6FE7A
-:10D2B000BCB5567FA278D0E7D31583FC99D7D94C5B
-:10D2C000FD32B08BDCE95A7F317264DEF9C1C407EC
-:10D2D0004C5619C619CFD5E4C985F96D361BE4C97A
-:10D2E00047F6C47E9097D3F93E6AEEF94B88BF7A31
-:10D2F000AFEF32FA3E571FB793F363CF7A364E4AF9
-:10D30000B49E9E754CA6FA1FB9128F7F52836F5739
-:10D31000F57C1600B95461857A4E1CFFCE55138BEF
-:10D32000711DAE5421665DF35A16B140CCBAE66D5C
-:10D330009E65A988E9B7070FCB0C783899BE90F0A5
-:10D3400070677AD911E49B8A35978E417A9CD7D23F
-:10D3500048703E61F6FB50BE7ED072674AA238D854
-:10D3600093F1F869D1F003F66E710C7E74BCC4B70A
-:10D37000EF7A7BDE6718D7D4F530376EFA82572FF5
-:10D38000BCE524869B3484E3AD0BF46D90E0A6BC31
-:10D390007014E97AADC38F74DD37FC46B1607FF05D
-:10D3A000EBC37E057BE74B943B12FA68F11CB28518
-:10D3B000D3C14070EB1957A38392C4EB197B613D35
-:10D3C000554C05863D6E19880E7ECA545B3FEBB8FE
-:10D3D00040073F37D0C1D88D4DD7AE847A1FA2BD4C
-:10D3E00032A237FE8F5BD4948BF1DCA7C944E74AA5
-:10D3F000C793D4F49B79BE08E5F1F194D0F5784E4B
-:10D40000A3E7176CCF4F991533EE070D008704F093
-:10D410001B3B4431F8A12ED04F9ECA0A27FCF3E8EB
-:10D42000E78439F13DBECBD34B260C413B2594D844
-:10D430005FABA7BABC360D725ED867A2FE3CEECCDD
-:10D44000FD2C0CA5F5E9C1D221E3317EF427B7A16B
-:10D450003C387E5C207D5BF3F68A11A8D7E2ED04B0
-:10D46000D87F36E0B9E70A537288EC50A9721B9D49
-:10D4700083AA12DB5E8CFB94CA4DEFE5A3DFB08A72
-:10D4800052A6D9A12B4C23FD4DE497AD7C02CF4988
-:10D49000814864AC2FB14A3A3705415886F98D0E60
-:10D4A0007EEE5A25D9646B4C5CC2624D9ED757976D
-:10D4B000FDFC3DF443DB5426A7637B2E3725C6EDE8
-:10D4C000AFFFC479C6E87B8B3928FB711F2AB032C5
-:10D4D000E40BB314A47B4E668FBB488DC1C3C2213D
-:10D4E000DC7EB4B7B737E4407BFBEDBF93510F5AF6
-:10D4F000611CF4B3D9B2A4B3B1FE6AB33B42F7984E
-:10D50000585ECC77B0AB9C859037F80160BEFDD8F3
-:10D5100085BF12FC9ECF901E6B383C26228820FDD2
-:10D52000F39C61AD2897274A75268C3B9A797B3E00
-:10D53000E537CEFE6A7867027A98B97F7507DA33E5
-:10D5400033F767CCC6F38399CEE1EF630ADB055B63
-:10D5500012B47F5960912648A7D81EA5B8C6973542
-:10D56000FF583BE663F462BB466F60E74CDB0DE9B6
-:10D570004C5BC87C47618F3F2D7EDC0D1ADFB79B6B
-:10D58000236923910E601C5CC78FF787BF0FAA9F8A
-:10D59000DD12095F371AF0732BEB36231C834CA680
-:10D5A000730FDDAF5BC1FC5A9ED1FEF42F8BCD6DA6
-:10D5B0004827F1FDDD12E5FDFDB81DFA83F4D6C361
-:10D5C000DDFF8A6A391891A73A584C7FFBFC871C0B
-:10D5D000AC777FF170F64B36931A03574091180BD6
-:10D5E000F75EF01D547E0D1BD3379FF5C09BCF23F4
-:10D5F0001E1F9F6211F0E9234302BB906FEF1D12C3
-:10D600007806D3C5B66E9F047473C41D7C0EF34BAD
-:10D610004DC1EC7480C7696F70441AC2A523F1F93B
-:10D620006B3C7FE7959FDE827C736B8DC410CFAB24
-:10D63000F67EB005F9F2B419F808F6032FDFF341CE
-:10D6400032D2CD1260C05879F24E553ED94F67F7AD
-:10D650008CE8F7BEC93B9ABFE4558D4FF475DE8662
-:10D660000C08E3DDB6C741FB99DBAA4C17F6594815
-:10D67000EFB755F1F81026758CB9C96077D669E710
-:10D680006CBDFBC17D447C3F5DD5C16DC4F752705C
-:10D6900002DADD27AAE76F43F9123F4FC5137C7BFF
-:10D6A00008E9B75986B8DB39CD0BB6C5F2A15EBF24
-:10D6B000B60FF9BA7FB8B64E1B1F8F29DF29714EFE
-:10D6C000A07B99F4678FDADE1562E861A0F158DE7D
-:10D6D00094C005B940F7E545E64CEFDD5F7C3DBD04
-:10D6E0007F4FD515ECC4385C5FE0DC90F103CF9F31
-:10D6F000793479A6B5D3BFDB83218676A1FD8B4132
-:10D700006427EC1FCEFD0F9F6A760173C27A91C128
-:10D71000421B03FF1FEB8581E95EA67DB335615C8B
-:10D72000519A47E274133954624B30BF5EFD452570
-:10D73000F675EAED1FCEA85F749391BF6B7812ED7A
-:10D740006B2AAA6A699FDD08F203F541FC7C8E37DB
-:10D750003DA2A01EB05B420AFA451B87A7E7AC8436
-:10D760007620D5C8EF634F0A2952EC77CD1F645F4E
-:10D770001952707FDB989F49DFF5FE1A052E6775F9
-:10D78000BE68847DDF73E417F37B66605CE91BE1B0
-:10D7900069C9D0AE6D158B9A7C8C1DF4658EC27DE7
-:10D7A0006EA8DE42E77B8D0562C61CC8A7786DE4D3
-:10D7B0001F6B754567E23D5A559048BF865CCAD5D8
-:10D7C000C9E8DF5D39A403E5DFC13B2CB4DE359346
-:10D7D00044DA8F592F7E2F7405F67F17F3A35E6D01
-:10D7E0003BFF7C8B13E5F051D8CFA2DF103B0579CE
-:10D7F000D436EDAC1DF773A918570774B3D91CA123
-:10D80000796DAAB152BF9B5A2DE589F0F77E864407
-:10D81000F5C34227C5070F66113BC2F58169333650
-:10D82000E641BB9C3C26E37E7E4DE1596DBF19303D
-:10D83000F1F328DD8FC8ECDA79964D3BA7B2C5C667
-:10D84000173E12DA43FE43C7F4084FA789E47F8EE0
-:10D850009FC7520FF7E33926774C433DE1281699CD
-:10D8600080FECD3C26E0BAE4696D748F39A780F55F
-:10D87000D19EAF5B0E40FB62DE1E7D42F2D76C3F55
-:10D88000D7C3E30CD7A21F0ACAC366BF7035CC2327
-:10D890007C9D2CA84A4FBD6A0FD7AFDBA0FF28C9DB
-:10D8A000D130ADCB57108922BDF9168B84A7B513A3
-:10D8B0008FD3B9C003C5BA1FD54FF3D85C73E4004A
-:10D8C000DA5F9BEF6664276D46190AED365FC7C2C3
-:10D8D000FC3C8965A27CDBB4C0722D9DE71702FC7D
-:10D8E000054A13CEFB4719365AB7EFBE07A2784F49
-:10D8F0003FC9CFEFDF429AB07E6D8689E6BFC91C73
-:10D90000CE40FF485F743143C387AF4AB3AB58C8BA
-:10D9100083785DA7C187DD3496FB17A480121BC7EF
-:10D92000D5A34FB81F03D64771AD83EB2CA48FC48A
-:10D93000E9D199B8AED4020BBB2A07F98BC34D1DB0
-:10D940002DF2B833166E41FE6CBD289DE249578B0F
-:10D95000610FDD132FB5D079F2C189E2CCF950BE49
-:10D96000BECE427E08C813BF8402B9ADC86F8EC94F
-:10D97000A5E5F321BF41B6C808DFDA42D98E745C51
-:10D980001B106501F2EBCAF47B128CDE3128329950
-:10D99000EC0550BE2D43441F2DDB2608C4EFF58156
-:10D9A000D2D030F85E2FBB85583FC05E0DFF8BB2E2
-:10D9B000CBF67A906F020F8486291C97D20422310D
-:10D9C000FA4B66D1F91873D35AFFF851BA0F556460
-:10D9D000A3FBB3DEBB42E574DFF1228B82786D3BA3
-:10D9E0003F7814ADAFCEA2203F6F10C25723DF6F38
-:10D9F000BEE3908A7E75FBFB4E8C1D66CECE4FAA91
-:10DA0000317ECC596C893BC76222CA717D5CE71BB1
-:10DA100051A2A74E21F8C764F2FF143615B8299E0B
-:10DA20007902C273DDC56F15CC4D4017D0DE993E2B
-:10DA300016ED65313A610CCA29AEC7982467C4E275
-:10DA4000778337F3CFE867DA5A02F3C7F1AABA6EE1
-:10DA5000A179058EFC14ED2AE7B18FBE4C3CCFD7DF
-:10DA6000498F241F7344C531982E994EF6596C3D49
-:10DA700090FB8DD981BF7A00BEBB6AB8DC6FBE9DBA
-:10DA8000D1BB13F8571003DFE64290D2F4000140F7
-:10DA90001EEB15CAE4475F2D2A9128C2738C8DE8CE
-:10DAA00069080B925C8B5FAFE358E31D1877E4F0D5
-:10DAB0001BE77956C32FFE49E9745E819628B3644B
-:10DAC000CCB1A3FCDB3D56C9C0FDF603AEC47AFE63
-:10DAD0004F197C5FB44B486C9FFF2DC3CEFB075999
-:10DAE000199D40A86214D70779319DCE6DC8C96DC4
-:10DAF00015B95C60D730D27B29459D767FCC784FB5
-:10DB00006BE3D01FF433486BC7E4EE680DACBF1570
-:10DB1000A816EFB5A578391C9D6A0F1CB1BEACAD37
-:10DB20000BF8A06644310251A6FAACCC42E72220A1
-:10DB30000DD5AFC41E38246BF5374D94041BCC2B88
-:10DB4000178021407DD7348BE11C45AE3BA262F9A2
-:10DB50004F4D4C499DD833FE9622165E09E30F0ABD
-:10DB600018E19D7CD70B2BD02E8FA7039CC1857EFF
-:10DB700031547C8EB15DFA2DBDF880E049F304D0BC
-:10DB800034BFC1DA2C0094E61D921E1F4BF277BC05
-:10DB9000A943457F280624ED85F98F7CF28DC04E80
-:10DBA000C83707399F2517BCB002E9D291C9F1F4F3
-:10DBB00047F42D43FA0893FF8E713B6A95A8203EE7
-:10DBC000B64673498F3732A90CF1D458794444B919
-:10DBD000BE660FF30B02D2FF7F5B63E77753460EFF
-:10DBE000C7BBA490FC937CFCFEE89A42D181F2F57D
-:10DBF000E01D2F90DEDB724064C8FFA5BF3DF6B08C
-:10DC000003E9FACF56CA37BF524972E327D04E4DC7
-:10DC1000E03F1F482FC7D7CF5BD226E0F944F6FC80
-:10DC2000C82BC3513E8724FF55888FF91D0184936B
-:10DC300052CCCFD99CD3A3F44E88825A0D6C522576
-:10DC4000A4A5CDBC9CDD944AFBA8D1D6CE866B6042
-:10DC50007E8F3C2931D497266B24631EF46B7AD1D6
-:10DC6000899AA0D7FEE891E9D10C94E3499514066E
-:10DC7000DD6B7E6F67703EF44D575E1D0EFDBA265C
-:10DC80007358DA43430EA0BC449B19EF553854AE89
-:10DC9000E7D649E100C679AFBB2B68C1F199B67FE1
-:10DCA000695C52F138C2F984A6F758E57C7AAFC4B2
-:10DCB000A7F18BA38A9524DA673DE049E2F12DF7BD
-:10DCC0008B07903F7C0146FA43AE8A4447687A1935
-:10DCD000272EDFF75C23EA17E76291D6B14EEAA858
-:10DCE000C17725D6DDC5E41AA5777FFF68FBE51966
-:10DCF000567E2E8A384EEB5907B9E440BEF9E62726
-:10DD00005E4708C71DDFB38E247D1D059D94D7E7B0
-:10DD1000B12D10F95AF3D8A0AD634D067FA7C851B5
-:10DD2000D849EFB3C4CBFB958E77E8FD9830D8EA9D
-:10DD300026BA8F16B906F3CAB322E3F7B58CFCDD19
-:10DD40002BAFD155FC7785C58C938374C7F10C74C8
-:10DD5000A7D94FC077361401A2F215F93142FC9DC4
-:10DD60009C387AFCA7CBC5D87943FFC90D4CA0B825
-:10DD7000B8C54C29CDE82D179926176D4C8DA2FCFE
-:10DD8000FBBF968B2007492E36C34A07C34E25B9E1
-:10DD9000BDE90ED4E3BA3C1C8F38C177A254F375A9
-:10DDA000A585B42FA27CD1C3AF36D37B43A276DE48
-:10DDB000A5C105DD500897CF3D8A419F3E84FF8075
-:10DDC00075EC6E4FBDB610C6DB589E5B84FB0B7BBB
-:10DDD000E845B20F7C853C7EC557C5CFCF1D797312
-:10DDE0001F8FBD17B730C342F4B750A7BFAA900723
-:10DDF000C75987FDA27CCEB390BE7C8445B83ED483
-:10DE0000ECD3168F1647ACD1553C9FC4CBA771BF3E
-:10DE10007397A27CCF10AC32EEE7503F1F4C37EA2D
-:10DE20006BA4175D5FB774AC74A13F2C47F3F7E7A1
-:10DE3000D88C710E45995C5F7FA5F901568B95B41E
-:10DE4000DF544B45DAC7E9F477418FC7C1311E7EF5
-:10DE500048A8AB26507C0CE5534ABA19F2EF56207D
-:10DE6000D90D5066CB5034FB402638B7FE581C8B7A
-:10DE7000F272777B851DFDEB82CF7635EE0FD70BE7
-:10DE80002C8A72737DC9EB1457D254053DC3A29CF2
-:10DE900005E22CCB98DE78063EA6FDAA43B576A017
-:10DEA0005F2B126DA3B885A6F0A1998CDBB10CE3B2
-:10DEB000529A0A56662E44F95E50568CF86DADB7EC
-:10DEC00050DC8C5CC012FA11DED7F631DF548F398A
-:10DED000F4FDE5E2C4FBCA6B32F9FE362281A8826A
-:10DEE000F96415887EE4FFAC3A4BC2795CAAE1295B
-:10DEF0002D93DF0F6BAD3F9441EF63899561D61F82
-:10DF0000BE60FA2BD363F031A90F7C78747C483A59
-:10DF10003E5CB3880F3B3B442E6F49AFAD63F2CDFF
-:10DF2000A81FD54A0BD9B18D66BE2F6F2BD4F842EE
-:10DF3000B6B522B17D53BA4E5922D23D1CEF449161
-:10DF4000F6898EC5CF515CD323ACFB1594778063E3
-:10DF50001A2FBE7D79A6A8C15111FCB49FE67804A2
-:10DF6000BCD27C36E7A7B7C6F2E9039A1DFD8087CD
-:10DF7000F3E9E6FA87884FBFEE3C75B95DABD9D1BE
-:10DF80000B02410BAA0355289B9A81FAF331E6470D
-:10DF900038319393ECF20FB1498C5FF6CEACE0C20E
-:10DFA000CC98F345395049EF165E89EF0A41FB0FD3
-:10DFB00022FC3EE80791E74BE8DDAD2023665EC01A
-:10DFC0003A04627290A1DB21EF912254EE990F7313
-:10DFD00071D1ED48CADB6CA0176142A7ABF9FD8B8C
-:10DFE0002EEDBDC8C7B5F7223FC6F721211DDDB212
-:10DFF000BAF4111C4F918228334EE27B9178FF795D
-:10E00000E25B14177D0A646D930BE3617E5542F762
-:10E010004FEE65B23809F36B4B31EEF9CE97ACDABF
-:10E020003DC98E9578EFE55111D60D6DD648A0EF1C
-:10E0300087615183501943C7BB2EED48C173BED3CE
-:10E04000911BFBF51FE3FD417A2F3393E369836353
-:10E0500029DD2F9BEB8CFAB0FD81DD4F3CBE09C65C
-:10E06000FB78AF8DDE35D9E858EAC3F28F1F7ED337
-:10E0700087FAE2F4DE372D89CE27974891A9788F69
-:10E080006CB13A88AD84F99744665928FE64E7017B
-:10E09000BA9FB6440E5AB0FFC52DBB293F65E71F96
-:10E0A0007C58FE6626D713A733823EF44BE4B5585E
-:10E0B000A322E89F5DB9A18509CFD933456DDE2F35
-:10E0C00051FF1B1D2F1D42BC9C7ED84A7EB7030FFB
-:10E0D000FF96FA3DB5F7459AEFC7BBDEBC15EDE9F3
-:10E0E000C58CF9519E9FB66B7E3D5B474AECFE7630
-:10E0F0009F060F3D7F3A59DB07670D504F3B8F61FD
-:10E100004E803FDD1FE848C1FB851F9B831684C7F7
-:10E11000228407A425000794FB8B2202CD73514B68
-:10E120002BDDB75AB487FB071701BC082E2D0768F3
-:10E13000FE4732B9DC38B5F78F3E7A9F628F95F68D
-:10E14000CFFABA1739833E848FBE5E80035FF7AE85
-:10E15000AF87A7B93A9E5AFE40F35ABC87CF6BF1FE
-:10E160004E3E8FB97B004F4EC4D32CC2FFA9BD4C8D
-:10E17000C17B305DBBDF3C89F6CCE9BD3605ED0ADD
-:10E180007D5E59206E53C6221F717DCCF608A48F88
-:10E1900099D441E7394B6459C6F7092E94872D610C
-:10E1A0002E4F3B4A8742F9D30F8AF48E25932323BF
-:10E1B000D1BFFA61A67EFFA7C3877EB15D9786882F
-:10E1C0003E3F4AD6E02D75F8307E66C3D0E0879991
-:10E1D000B1F878F7C591B8EE15A6CADF7A719C2719
-:10E1E000787CE8E7B9957FBD9FE63DCC70DE189F4F
-:10E1F00002DC52F0FCBB406441BA97BCE7E5A4D80E
-:10E2000073E82F33B9BEDAE87887EE239EC6F71C91
-:10E21000693E118AD31A1EA8F0E139DF47CC19C430
-:10E2200073D98F1F7B99E26DBA3274FF5307D53BC8
-:10E23000B5E7E5544C2BB4787816BE91E418C0B11C
-:10E24000C13636917CD4EE1785F9BDB13302084C46
-:10E25000D4135B7438575A6618CE75B81CCDDA9C47
-:10E26000D34EFE9670E2FB66F1F237EFC14974AE11
-:10E270007C8E253E57665A9CDC0A5312C5DF6C74AF
-:10E28000FC8CEEDF56A95619EFAF1CD7E4E27BDA1F
-:10E290007B0B9F27A5A822D0CDF34383DEA169BDC8
-:10E2A000EFE156AC59E243F856E0B9076D6AB65D46
-:10E2B00087F1845D694C7B9F9445097E66BDFC5F58
-:10E2C00078B98BE78B873EB316ED13842FB7531FB6
-:10E2D000BD0EE31ABB7278791996437E566659E1F2
-:10E2E00050EE3711E81C89995D5D36AEC213C1A3AB
-:10E2F000072E12EBD2ED6AA83C7B2823B8427F138D
-:10E3000086D2BE1EFA1BFDEDFB03BCABB6D4FF8567
-:10E310007E6CFF5BFD44482F89417CEB0ABEF9B956
-:10E32000FE7BB494C94DAE6FDFFF3FDA7E852920B6
-:10E330007E8474384824BAD7F9BAEBE11145B8FFA6
-:10E34000B734DC1145B5D9955C6AC980EFE7147E16
-:10E350007E72FB831B0CEFA8EA69FC7BB5FA399E41
-:10E360006598F17C76D5502E8F560DEDF113E2B9FC
-:10E370001C1E57D1C619FE9AD3291486DBE9AC526C
-:10E38000C4F8C382761BBDD77B11034101F31FC5BF
-:10E39000A222EAEFD1AC93F2DF411040BE882926D9
-:10E3A000CC8F63DD3E69189E3F4757A19D76C41D03
-:10E3B000AC43BAFDECE18E770428FF4966F0979DE7
-:10E3C000E8EF1CCAED5427988548CF32A64087A2B3
-:10E3D00063BA2791DCBF004F593A157BDE76831470
-:10E3E00058C7F9224BEE72F4C05997070BB5F7974F
-:10E3F000F4F6279F7C2297DE1DEA7907BCDFFBC07D
-:10E4000073AB163CF8D8B87ECA3539BBAB267C73E3
-:10E41000ACBE6FD3E0BC7DA868B00B6154B2E39E84
-:10E42000BA81DB4FBB2E0DAC7C14E56D8B89F6D326
-:10E430001FB5FC91BF8753C6C8AEEB6BDC8FE2F013
-:10E44000FED1F62732F97947D8A0DF173CFE8B9131
-:10E45000B1F1960066C53D81BFC341783FE457AD39
-:10E4600026A4D232F2C75858258F53C1F90EC3F7EC
-:10E47000B822943A5907A529AC9B5299C9E49F4EFA
-:10E48000657E4ADDAC8CD274562970FB2E44692619
-:10E490008B509A85F629FA7B5837A50ADEF88C89C5
-:10E4A000DFC8C513D361F8DE6E19FF1E171F2421C4
-:10E4B0001EC72590E7717141D28E2A92E7181794F2
-:10E4C000EFEEFD9E822EBF370C2DFD13CABFE787EE
-:10E4D000068E20FD1C7EE6557EBF62AD40F6F50936
-:10E4E000FB748B02A87B3A3540EF80A8222BDB0E11
-:10E4F000FA7D8EEEFFC73F3D4E1881D96C3E151B4D
-:10E50000BFC36CCE023C2F9EAD559DAD9D83CCD636
-:10E51000FC20F8CE19BFA7E7A7FBF6B3B5F387D960
-:10E5200071FE1716B21AFC282AFE03D6313B24D0FE
-:10E53000B9C1ECA4E92F75B2BEE924A63FBAF757DA
-:10E5400011E7871AD09F15979F13DFDE26305B3ABD
-:10E550007EE7F4F4F4650AD975BA3F0B084EA1764C
-:10E560000DD677C92F14BA32100BA7E42CBE6FB5A5
-:10E5700087AE4A49F4EE929ECE01FBCC9CDABB3DBD
-:10E58000EC085DC8F7BA1CD6E93C0737B6C84705A2
-:10E590009684EFAEEAE91A4DDF37DD1F62386F7BF4
-:10E5A000F41E7A8FFA6EAF4ABE5A5B6198EE07246A
-:10E5B00015843D6A82F935E13BCEC05F4DC9C67313
-:10E5C00093C5599CFF1767F1F3DD4317A597E279CF
-:10E5D000F66A85BFEBBA5AE1BF47B03A6BA0F7C8FD
-:10E5E0006D867BF2AB066FA57780EC5F6C63684F3E
-:10E5F000DAA5C4F7526ED2E0BA41ABBF71F056F261
-:10E600009334E4F3F3FDF8FA07F21FA2F71F1B732C
-:10E6100060BF8BE9FD2AF55F9FFF5039B6B7451BF8
-:10E620000DF7797F94C5E59A6D0FA747539E259CFA
-:10E630008BF4208528BE40AFD7D8C779D2B42CAE92
-:10E640008F9ACC61BA27D3A4D9438BB31CEBC82FC4
-:10E6500097D57614F9F55C1EA3F3467BF4493A4747
-:10E66000B01558985DD07E0F00E33B0A23841F74D9
-:10E6700036450D741BF3EEBDA977FF755F853CB879
-:10E68000BEC69C108D3FD07A2FD5E0D9A8E9D746D9
-:10E69000BBF11C6DAE86EF2B75B8EC67244FFA8189
-:10E6A0000BD97BD336E75E8FF3B1ED1B108E86FA64
-:10E6B00039AC7C50227E8997FFCE4231EE1D2581F8
-:10E6C000E6756E8FA0BDBBC8DFB1E8B1032216ECC2
-:10E6D000F75F37571CBC1AE6B330E80C60FCE41354
-:10E6E0009BDBE89EFEA217CD149F30BC7316978368
-:10E6F0002DFC7D45FD7DA38B5AAC86F7A696B09880
-:10E70000F71761BC45C73E3AC6E89EB1F1BBFE6E45
-:10E71000C01AFC90204E2DFEDD8175597DBC3B500A
-:10E7200098D84F13FFEEC0CE88487A6339C6B1D26D
-:10E730003E606B29EE7BAA8E09E437E8CD87CA9646
-:10E740003C734C5EF0133DAAC94981ED09F8E94FCD
-:10E750005E4E0FBBF0508DECFEFBD645B330AD6383
-:10E7600078DE547B9724E3B9766D3889EE97D4CA66
-:10E770006218E346BCC9A536F43F329728E33DB49E
-:10E78000A9A6C974EFC972B7348EDE696D5BD881F2
-:10E79000F7EA6A3D12433EF6BA781C01CB10E97DD8
-:10E7A0009A3AF975D76CDCC739F93DBD6C99851576
-:10E7B00001EDBA00C3F365D8AC5446C1F4F20A8146
-:10E7C00028BE77C52659E5EDFC9D99EB8B26901F59
-:10E7D00098FE0EB44E8DFE1AC709D8CA10FF53EE2C
-:10E7E00076933D18F69818C6011ECFCA21385A9262
-:10E7F0004BA36FE3FC663AC8B71B56C554C4C32B82
-:10E80000ADAB665C05DFCD6189E21D0ABEACBDF92A
-:10E810002A68DFDD6AA1FB163A9C943AC9F07E8330
-:10E82000EF3E63DE12F75E85C462CA21FFC72CED9E
-:10E830007C9295B3686C1CAF3BC00FDD6527BD5B58
-:10E84000D709FC49E71F5AFE4F5A7E87394478DFC3
-:10E85000F1B640FED583AD73B3495E3A966E73E070
-:10E86000BEF0283FC7EC4B3E3F9AA5E8EF7CD8B5F9
-:10E87000772AECE8F78AA7A7BA6AE6C738435BB8F5
-:10E880003D6914E2F7B0997E3FA05E938F9293CBDF
-:10E89000719D6EE2D3FA38FAAB37FB0B4250BFFEE4
-:10E8A0004B93B66F3C797D7432863D28B4AF3667A2
-:10E8B000313FB287D9DD9129C33C46BD68F1E3EF12
-:10E8C000334C7DB67010CAF9512FCF24F9867042AF
-:10E8D0007C4955163FDAC9D62AB75F1A87F59C449A
-:10E8E00097679D16B287A42A4788ECAFD6091E25E4
-:10E8F000765F512DFB2533FE6E8D8DD2557DC8FB85
-:10E900006C9758867E578B662FBBBC5C9EBABC0E3C
-:10E910007EBEA8AD739BA4CE407ADE0674837137A9
-:10E9200007EEE3F4BD3CC3467A73F92BC386F4E7E4
-:10E930001F7CBCDAE3CF03C06EBDAF82FCB625F707
-:10E94000BCD78874B73CD926231D9A52866F9C8CFD
-:10E9500074FFAA99EE79D6264F5066C7F4674A9994
-:10E96000E8417898443513E979F8965DD74B939050
-:10E970004ED44D789F7F8CF75FAE9740BEEC4856E3
-:10E9800033F1BC6C82F7619E4F533709507E997703
-:10E990000BCF7BD54C11F253BDAD3C9FAF6EC2FC8B
-:10E9A000F5DEED3C3F9AEBA31F789F24795E6BF672
-:10E9B00097A37FFA19987F613EBE93CAD3720D2E3A
-:10E9C0007AF973F8DD8CEFAAF234BEFC05ADDDBE3A
-:10E9D0003ECA7FA995EFEFA3FF97B476D13EDA1F29
-:10E9E000D4DAB5F7D1FE90D6EE701FE5AF6AE5AF89
-:10E9F000F5D1FFBF6BED3AFA68FFBAD6EE8D3EDA7D
-:10EA00001FD1DA1DEDA3FC2DADFC585CFFEF68F5BE
-:10EA10003BB5EFBEE486B7D05EF381BC427952903D
-:10EA2000DC40FEAEAD55C544FFB5E3B9FED7E9DD28
-:10EA3000A7DD0BE8F0F2B8D20E2FB76F966B745EBD
-:10EA4000724FDEFAC94887BFE3F714417F1CC57BCC
-:10EA5000B8EA3D22F9F796BFC2DF95597E8F44E7A9
-:10EA60001B3A3DEAEDF5F987B579D669E9422F7F82
-:10EA70002F2347F5F8A7C7E847B36CCCDB809F305E
-:10EA8000FEBFCECDF54CC13DA50D786E520B7A067A
-:10EA9000D757EFB444D1FF552F4B545EE72E0DE10D
-:10EAA00079BF2A4BA487EADDA9517CAFB9AEAED8B5
-:10EAB000F0DE679D2CD1FB31926B8A6DB613E5C6F3
-:10EAC0007419E5671D93534BE85C0DF669A84FAACE
-:10EAD0004A65943B392E772ACAE55BB3F9BADA93D3
-:10EAE000BBEC788F42BA5FA4B70286CB12F17B5E93
-:10EAF0009D1856601EEDF272F2BF6E6FD6CE1419DD
-:10EB00003F4FD4E5FC8E9F4D253D560B7A4C213D61
-:10EB1000C60615A5F7DCDF948E8DB2A0DE92334DCC
-:10EB2000CC0C72F9803795C6DDFE20D75BF9A0B713
-:10EB3000F09DB56DC58CBFF3E6B1915FB742629EA3
-:10EB4000C1317ECC035E6EC733D3743FEEB3F3F1B5
-:10EB50003DC418F80E0B19F556CE007A2BBB0AE40B
-:10EB6000654C7DAB4736E49FF26AEFADFA991FED35
-:10EB70009BA9CF6E267D7216F50943FDF2EF49A3DE
-:10EB800050BF801EB1B2DE725097C7BADDA2CBE98A
-:10EB90005A4D6FD4C6E98D81E5EEDF5F1941F42946
-:10EBA0001ADEA1E94BFE2EC73801A04B735020BDE1
-:10EBB000C2A420DDEF1F086E6673998CF6F840F052
-:10EBC00033A77DEA42396D0E4AFEF712DC931A082C
-:10EBD000BE7A3D8B6DE816D46B9F1E5B51807EAF75
-:10EBE00055E68E593B916E854174BF43D1FC0E5B57
-:10EBF000ABF7B113F9F8FB3D7FD95C87BF8FC50236
-:10EC000032F94B324A156C67877DFA60B2E3F87EC1
-:10EC100093C9C1D042B4E75FB428782E70F819EDDB
-:10EC2000FD06AF93E079E7EEBBA89D59A8F4F0F399
-:10EC30007E46F05E9D994A76B9B2C3A6D98D1FAFC4
-:10EC40000FE441BF62A780FAE7F7D95BD7DB501F1B
-:10EC500069FB0198D9F770FF13095BB4FA78D19D6D
-:10EC6000B1DDF8E334DCFF1C903CB176A8E97B53BE
-:10EC7000B2F03C541E25417FEEAD96F5662F968B83
-:10EC80007AFB005E1E42F1A5E725C0C3D3ED5AB959
-:10EC9000EA5E3F05E6B3DBA28F0F06F5441C4FD4B6
-:10ECA000E829793DF6BFAB546F7F7A3DFE3E17CC25
-:10ECB000E75A13ECC1727D9EF5CE8C9EF97AB37D36
-:10ECC000EB6BA0BFD34A670A6EE396B4BE978E7A09
-:10ECD0007B7539BF3F8C0C80FE11FD1EF105BCED2C
-:10ECE000B9414557ECDF0EFD674A21142D33751EDF
-:10ECF0007200DC96ECABB499457CBFAB4CC5F7BB5E
-:10ED0000F4764BF6CC223B67D9FE224A13B43B8CF7
-:10ED1000F767FE817636CBD718EF74F4F5A53B156F
-:10ED2000BC3753D9E034517DC6FD5F89D7A7B73FC3
-:10ED3000BDF3F51FE0786794CEF46BA0F6EA28C027
-:10ED400025413BBDBE7EBFBAD81328F2C1F74F3173
-:10ED5000600CE59654E9C7FA115B88EEB1D9CDA1F4
-:10ED600032D42700FA30C629E869B12F8F9FA3C497
-:10ED70007D8FE7AF888D0D9E8EF2F22E89CEDD233A
-:10ED800036D53106F2CDB04FA98129AD2C3A3216D5
-:10ED9000E3059AF73A49AED7DED5EE2944BEF25BD9
-:10EDA00018DABDCD977664E03BF875775BCA1F43F0
-:10EDB000FA8D2EF7DC1E638779B3791CB7D7152A35
-:10EDC000477EB4033FA23E6E34076DF86E8A9A21E7
-:10EDD000525CB51DCA5FA372AF56EE9F7615EDCBA0
-:10EDE0004419E7559F37675A29EA354F2AFF1DC254
-:10EDF000FC29E5F3A03C2C5B6424AF45D9153723EF
-:10EE00009C9E96FC95C87F4F3B9D32C66381AC2487
-:10EE10007D20E5BB293ECBAADD77F216713D7F410F
-:10EE2000FFF9B81EABF3F138FCE6E48E1B4AA05D97
-:10EE3000D2BDA2AC42FF8D773F5486F1895BEE3E96
-:10EE4000F2078C6F6D4A97E89D815D35D100D6EB56
-:10EE50001658471BFE2E52D58C0EDC8FAE658A826B
-:10EE6000F6FA2E614608F573779AC4DAA07E529EB0
-:10EE7000315ED559688C97CA5A6CCC376607EFF665
-:10EE8000513C5071098E9326280A3E1D5CDCC12836
-:10EE90003E3F3D2F4FC6B8EE94E2B838D8C9C67E83
-:10EEA00052A718CBDDD3E3E2B66E32967B6E31E625
-:10EEB00033E718F3EFEBF4E8E1E70FFAEF3D6CB955
-:10EEC000FB71867ABAF18B4114CF8A7044BB3D69DD
-:10EED000B8E4C77311AFA56326C6C1B19149642FC9
-:10EEE0001DF4253105F2D6A58CE4A935357200F75D
-:10EEF000AB56512E534943450EBCEDC6DFEB32D124
-:10EF0000B96C3CFCBC5EEE1F7456F2DF858B485139
-:10EF1000B223ECF70C926BFCB8758CF3C32E8EC940
-:10EF2000F378EF2D3EED1CC5A3C7A9115E6165887E
-:10EF3000B7498C7E3FD27BF77B6A14E6B156C9ABEA
-:10EF4000443B63B5D849E3A815CE20EEBBD330CE01
-:10EF5000DB84F1DE2AA5F1F8D8A9D197C2E68410A6
-:10EF60008F9E5922C58FD41F4AAAC3C3977AEDBD7D
-:10EF7000063D8E4DA7CBBD3E6E7FEE6E17C500FAE7
-:10EF8000C16FC96B437CEBF996A0BB95E2FA8B2A63
-:10EF90003B912ED975DC0E053D40F7B2F538313D79
-:10EFA000AEB0339BD3F707D9A2210E9CE28862E270
-:10EFB000C0E9E8CE8447172119CF7BBC456532CA2A
-:10EFC000999FEBF72F18EF179F2FA47383E962E047
-:10EFD00022CD9F8E76DD606DBCC16E2940EFBBC334
-:10EFE0009C44A8FF20E3F507E7ED5981F7AE7623AF
-:10EFF000E120FFDCCEE11C4FB719EDA1B2D1082F03
-:10F0000001F461566F3A167C2D741E587F2F4BB554
-:10F0100016F5A6EBF1266EFF742F5028CE72203A1B
-:10F020003FE173713F76DA2619EDDBCCBC076BE864
-:10F030001ECCBD4C467D97D9DE7103FABDE2F921A5
-:10F04000EC4819CBE3E4BE991FDE64E2FCC18648BC
-:10F0500084B7F8F8D2F878526FB64B3B87023D90F0
-:10F060008CF701E42B304EB0FB1E46EF0494BED863
-:10F070007CF3BF417F9FE55B6494D7D96F049F7099
-:10F08000C0BC3EFB45301BE5F456A9D3EE8AF17BAC
-:10F090004A22BF7FD64B5E6BF4A1A0DEF0FCE3A951
-:10F0A00017E91B882B92973E4A467FD5B675BFB7A6
-:10F0B000A5FD1FDA2DAA3984768BAF5DCF67901D31
-:10F0C00096FD06CF8FDD9AB15E95106E8BC95F7489
-:10F0D000D03B97FC45D25BDC5F34DA1408639EFDBD
-:10F0E000C54E71773BF6DE321FE3D5EAD3AFA1DF21
-:10F0F0003D1993CDF79D85D93A7F1BD72F590241F2
-:10F10000E49BF8EFC3B3F5F3C4B20F6701FE463FCB
-:10F110006AA1B8BB02B1A22107F9A1D144F8AC3071
-:10F12000294BD7C4ECD3EAD34B2667A7D1BE8005C1
-:10F1300061C3A09C17581098CDE73E5E82F49A0DEB
-:10F140006C86F2255BE506647655120BC6D0A97273
-:10F150005EA2FAF5E981C9D99ADCC3731FB3C6D29E
-:10F160004FA796B159A897E11BEA5DF3CE247EDE46
-:10F17000E336DE8F349978BCC8D5DABACD78AE33B1
-:10F1800016DF7B13A3D631BDEB5FAFC149B239A304
-:10F19000A641E8277BED28DDBB8C3B07C6FD2DC5CE
-:10F1A000E52C66E40745B850FE4E99BFDB5DC5E32C
-:10F1B000016AEF63029E05D46AF754D45BF9EF0E3F
-:10F1C000B34040C1F755688BA9E0FFA2C4BF1E1B26
-:10F1D0004BC5FA19AC83E218593B5378BC84F1DC77
-:10F1E000696B1FEF40E97E00A9CA44FB94512FDBF5
-:10F1F000F9EF4355317A279CDE6CC2FDEF7D2C2C54
-:10F20000093D7EB80EAF42EDF4F3D85D5FBE43BF5B
-:10F21000C75C20B6055F23BB21596E43FD9864E4AB
-:10F2200043FDFEDAFD1A1FE2EF490763CE8F7CEA49
-:10F23000718AB7CF66DD35B8CFCAAE4A35E0F982FC
-:10F240005FF6FC50161C17DB6F98F3759E44EF7445
-:10F2500029E77D54BEB55A19A0FFDC3EFACF207ACB
-:10F26000EABBFF2C2ADF16FDD4753D80626BF77B6D
-:10F27000AE32A5C76E8D87B3EF3EA3FCFECEBEF8BF
-:10F2800078720E17BB39E0BE01E066BF5FF4B7329B
-:10F29000FCDD1B63BD6939E75CFCBC5CAF1F75DF3F
-:10F2A00088F561DFDBAAE0EFE818EB9795BCEFE2A9
-:10F2B000E7EE7A7D3EBFCBCF1BEBC5E3277EBE30AA
-:10F2C000AFB4EFC7CCEB0A9BD5505E3EABD7BCD2F8
-:10F2D0007E1833AFAB3CC6FAC19AC4F3BAB6C0DAF3
-:10F2E000EFBCF47ADF9BF8F5EAC5AFE3C669D63E1A
-:10F2F000E0CEEBFFB0FCEBF5FBA3F9FDD7BBAD2AED
-:10F300007E1C95E409C8CD0E944F154C5985EF84A9
-:10F31000336752C2B8E0C91A7F9C423F059E930EE4
-:10F320000DBC89F2F1A497C7FD1E7E666108CF610E
-:10F3300096EFB52878DEE1D5FCD620781621FFEED1
-:10F34000B6C92E8C07147D8A763FAA2307E3F97687
-:10F35000EF387233C93D66B46760BF5682FA1A440B
-:10F3600018DDCB780DDBA5C5C65104C8FEAB17FD73
-:10F370007FA47DD50FF8BE4A8FDF8FB5B3D8841E2A
-:10F380003B4B8FDFDEA08D733E9BFB03C1CE570549
-:10F39000B2F3258A6FFEB9AD6303DE3FFAB9DBED48
-:10F3A000C2FDCC416DDEBADDA8DF6B18322BAFC8D1
-:10F3B00094005E17F44852CF7D098CA374E5E5D123
-:10F3C000BB1868E78D2DC47E395CFF07CA89A75634
-:10F3D00000800000000000001F8B080000000000FB
-:10F3E000000BDD7D0B7C14D5B9F8999DD957B2BBC4
-:10F3F000990D4B1E3CC26EDE8100130831A095258D
-:10F40000448C96D20D3E0ADAE292F094BC00ADF143
-:10F41000CAAD13121110356A44A0800B8A62AF681E
-:10F42000E8450D08DE1035B5B7D886B6B6D67AF9F8
-:10F43000AFC0452A086B1FEAFD17CBFFFBBE339315
-:10F44000EC4E7655AAB7F7FEFEF187B367CECC79BE
-:10F450007CE77B7FDF3973AF893156CA989A2F8555
-:10F460007609F05B666C4D19636EF8C9B2197B447E
-:10F47000EE734B50FF88479255A8EFC9F232368998
-:10F48000B1BDAF994C7E0F638F7D3777A7E81B28FE
-:10F490006F0A7A766079A489053B1DD888BC8CC137
-:10F4A000FDBD36D9BDBE048A529FAFDA09E5DDBF86
-:10F4B000B949703196398A517BB5CDD3D989898CB8
-:10F4C000BD6889BC7A11C7B35108ED82765EEA281F
-:10F4D0009921C1FB0B4F336687476BEFBCEE9193CD
-:10F4E00043189B7C529E86F76BB7BA1511EE37F422
-:10F4F00035CDC07E581353F214C6D2C569A213DAB3
-:10F5000049BFEFA8D20A437EB4C7DB158672648771
-:10F51000A0ECF462FDF292E5C5F0BCC3EF75C07CCF
-:10F52000E7E350E9BE7B8619DFBBCEA2B4413B675F
-:10F53000CD6C4E273C7711FFA60E5CE77FD75BCEE4
-:10F5400060FCF33BEF9C4FFDCA00B24C28DB641A11
-:10F5500087CD2BA7B640393D89D9EC13182B5B2DED
-:10F56000F7DE85FD2F75CA3B01C6AE72B9F7873845
-:10F57000AFA62C5954B0F310C1416F7FA13F606119
-:10F58000D0EF98DD16688CD1DF45F837B633B63C3E
-:10F59000BE2BB65CD21D5B9EF8466CF97998231B96
-:10F5A000CAD814DBF06D2701DE3D87AC0CC7BBEC7D
-:10F5B0004C52C80AF03E60660CE7AFEEB1123E4C0A
-:10F5C0005FE6F0237E9CF920698715CA87DF49A290
-:10F5D000E76FFD173B7FDED4F91C96D5E792193E05
-:10F5E000BF6C4867592A8CFBE5CFC45B02C57C5AC7
-:10F5F000666CFFB9A21DEBB17E6267990CF75F1CC8
-:10F60000CD581FD64BA17138CF17FF2652BB91673B
-:10F61000ACA19DD0EE99FD4F3F87F03AF3CCF0546A
-:10F6200001C67CB969E7C4F558DFE2F4EE84FB5308
-:10F63000CE3C9B138C5A9765BBAD31F35CE61568E5
-:10F640009ECD927FF513B83E47CC844F2B17866A28
-:10F65000BBE1FD954296A2623B16C0D3622C2BE91A
-:10F660006EC0D7292E8EB72BED508EB3EEFAB5664D
-:10F6700093C8821307CAC7D73D4DE3293CFD36E145
-:10F68000F501B36A4A4238AE13945D30FE0376D773
-:10F69000389682D7AC10E2CD3F794D343E98D70FE3
-:10F6A0001B102FDE14959D2C717F8519BFDF5A39F1
-:10F6B000F173EAA15FDF38C6CEFF21E9163F8CA3C4
-:10F6C0006053ECBA178562CBAB113E806F352CEAE4
-:10F6D000BE0FC793BD2683E884D1780A4FBF7B93C2
-:10F6E0000FC63BCCCA9A102EC67EEFC379403B3F73
-:10F6F000FA11B45348CD881745DE9E370DD641A385
-:10F70000AB97054E47F077DB70A0B76502E72FFA9D
-:10F71000FD658671E8ED976A70F2589407C3B4FEF0
-:10F720005619D7FF83BBAB1E39691E3C9E5377FB2E
-:10F73000FD9551F7176D5ADE9B09EFD5ED1D3A4146
-:10F740008C826FDD33AFA6DD0CF7CFEE96146481AB
-:10F7500075739F7A600A3EF78CD889E3C57A3FCCEF
-:10F76000F76CE7EB2E7C6ED156F704D13BF0FEE24E
-:10F770004D57F92B0B07E079A974FA5239E773CB8F
-:10F780003ACD211BD245E75B3386239E6E12943C13
-:10F79000E8A74C0A8A4877CE52BF599DCCD8D40BE3
-:10F7A000FFD63B0CEA1B0F4D2A5B0FF5EB4D81EBAF
-:10F7B000BE8574B75D5476C16B2FFC7A455A306AAA
-:10F7C0007D7A34FC5F7F631DB5A3026EE40153EFC5
-:10F7D00029AC998EE529C54CB0023F769D66FE9016
-:10F7E00003FB636F9B52193B7DF09E719289F8D1A8
-:10F7F000CD482767984B41BA3BE06CFA15F5B7C77F
-:10F800004CFD4DED4E1190FF1E785250D63384477B
-:10F810002CFD9D3EBDDA358DD3F52D01920326E6F4
-:10F8200081F6963C3196F8807EDFB87E4B43063AEF
-:10F8300036E0C5096D5E889AD1F8657C6EC84CD5F6
-:10F8400082F458D70CF2228A6EEA4EB65B98637047
-:10F850003F8CF5E32F43FC05BC645E9AAF9DF80630
-:10F86000FC0936C0DB0FF0570E2F33E8FF5681A698
-:10F87000C6968DEECC473E274872455BE6007F6515
-:10F88000E521E2F367E1E77A05F942E731A47794ED
-:10F89000A5BB50BEC8DDE7B660BD3ACA8FFC68188C
-:10F8A00022295CD9F3C9C47FCF7AC34FD1FBCF8E55
-:10F8B0005554B87D1EE9C541EFB952A3F8534BE743
-:10F8C000ABAE3094CFEC1D5221BA106F7FE6C279F7
-:10F8D0007ED039A4C2E24ACC378C7C134646F07DF8
-:10F8E0000F7F02DE25F9FC661FC2BB0D842ECAB352
-:10F8F000214D254D71D64D7FCF63692AF122FFF846
-:10F900009E43413E9E6AAB7D1CE535FEF9E1FE1F3C
-:10F91000DF18B213D7FF614DAECE17783F7A3B4365
-:10F920007D9C9FBC71383F250CFDFC917953505E46
-:10F93000ECC90964F8E07E46459F5F0478645CCBBF
-:10F94000945678F584A87C5F86F558C0405EE2B591
-:10F95000346841BEC2DA86D278195366203C17CF8C
-:10F9600004F897F032CAB7A5018BB21EE470ADC49B
-:10F97000E15DBB5B08B5C258166C8885C7A20EEB6B
-:10F98000005EE0FFB646D5433F4BA5D01A945B23FB
-:10F9900040F318520EF8F064ECF3CB58378DABEE11
-:10F9A000D98BD67870FE8B06E73D39FE09383F616A
-:10F9B000B68DC6B3728F40F2D563E9247D22B21CA6
-:10F9C000F8318C97FD9AAFC34D9ABED478E77CFF8F
-:10F9D00002B89E6FAEF52F802A2235E4231D2984BC
-:10F9E0003FCB2A3B7B89AF30F9C73767607BCC2F91
-:10F9F0006379A393EB7BECC95791AFFC85C99D88D4
-:10FA000087539608F4FE945F8B3B01C3D94DFDEB01
-:10FA1000172038D679998C707CC71CA079AB4B998C
-:10FA2000BC0BF84A9D2DA0EB5FF2D5309F45AC8909
-:10FA3000E65DEDCBA6792E61ED54AE67610B1371D7
-:10FA40007DCB52105FFFC4145A5FD093983D753040
-:10FA50005E21FCFD51705BB235B6CC9E8C2A6723CB
-:10FA60009CA11C05FF867D17ADFE38707FB45F1E1C
-:10FA7000858AAAC746E3710BE1DF316D5D1EBD616A
-:10FA80005126F2910751211EA635508EFC177E4D4E
-:10FA9000A172B70DDA4F9AD85FA6FAB2D5BCDCB026
-:10FAA000E3C5C0A62B00DCE660A60C8B532B067AC0
-:10FAB0004D00D739B9C1154857B5267F9644FCC4C7
-:10FAC0009F1F8071B066BEBE8F4D682A6A8AA37F71
-:10FAD000E8E3DF2874769B908FECE7FA85B3346215
-:10FAE0008EE6FF1B7C5CBEA7F48469FD232F080C07
-:10FAF000F5DECDC24399B88E9B33BD422BCCA974A1
-:10FB00005FCB34E237C08BF2605DEBF7BDD73B1CB7
-:10FB1000CAA5557DB84C30EFC0F2D7919E2725710C
-:10FB2000BD39B9698709DA4BBFA570422BE0E743BD
-:10FB30003E2FF59334B1FD30B61359EE9577423B25
-:10FB400019AB55DF8A62ECBFA985F0B79AD1FDA148
-:10FB5000DF59D582CFDD378CA58AF81C6B11F0B93F
-:10FB60003543055A8F35F3D99C1FC3556232E99D41
-:10FB700023E6C842CB642C374D23FCF2CAEE9F65C6
-:10FB80006299B5A5805EFDA88B919E39D424DE5282
-:10FB90000DD74727F072EA2AC1BF9388E121825727
-:10FBA000BA955509A9FC7EA89848D8BF97EA43346E
-:10FBB000FEF4E94D25388EF41C7EF55882A65CE8EB
-:10FBC000FFC851736835CCF388862FB7EDA8488FEE
-:10FBD000E6BB47CEDA2413E8754732747DB6DB8185
-:10FBE000FAEC6D25D3D39118B373AB52705D3D59C8
-:10FBF000B1F5E7CDFE9489483F474586EBF7678727
-:10FC00003F05F5CFCB2D7CFCC6753FACAD67E3A7B8
-:10FC1000020B45C9B3C6391F939DD0F8A91473FFD1
-:10FC2000ECDD368622AE5FEE2DE99981CFD5B3BEED
-:10FC3000358887F59DC92C1445179727C5EF57A719
-:10FC400087C64F45A6C6EDD7127BFFD3214C1D12A8
-:10FC5000EFB9B4D8FB308F9872D727FDF3C0FBAC57
-:10FC60003CEC0A809D3813E52894CF874CAA793C58
-:10FC7000AAF15CFE9D93C32ED4CF415E36E1BA9CBF
-:10FC8000F386491E9E67AC0AEB2F37996EA9C6F51D
-:10FC90009522AED9CE817EF47A7C3F7A1DCFCDB14C
-:10FCA000B06E5A9F088D03E1A71630B6E5E04716FF
-:10FCB0002FEA11070F13FC747C8986A31AC56FD233
-:10FCC0005AFBBA4D4057177C9FB51783C13AB447CA
-:10FCD000E70B17DBFD2024D244530C9F482EEDE7A1
-:10FCE0001BC4A61E35893A9F79A872444C999E1F61
-:10FCF000785FA8AE04BE525ACCDFB7649B8EAE4686
-:10FD000059C6DA697C308F2C845F7FD966283BA086
-:10FD10003C36AA2C1BEA3D86FA0C4379047FFEACE4
-:10FD2000B33B0BED5777B6A55A023A3D9BD93D4FF1
-:10FD300080F286565B752594EB4BB9BC6E3828284B
-:10FD4000246E34F835285CEF7428614B6D31C2A104
-:10FD5000AF17F94A5D97200B400F8ECEBDDD54C61C
-:10FD6000F7BC51EF750AF45E5DE77BF45EC2F60BFB
-:10FD70004D44E7EB0B8FF3E73ADF27BDE0DEB6E556
-:10FD800001646CBD662FF105B0E2FCC3E1C586AE2F
-:10FD90006A16740CF0D77399FE5789BF1E1264A4BB
-:10FDA000CF7E3CC5761D0374A13FFFFBB107DF4248
-:10FDB000B523F9B68F5A2478FE3FEADF9F847AE1B3
-:10FDC000EF3539B251081561BF5B58B008E5E0F76F
-:10FDD000EAF30E9BE0B963E6F036E4BDD5D959D518
-:10FDE00012F0B563CEF04801E4FC75D945BC3C3453
-:10FDF000BC0DE1F92FD9A309BEC74686479AA0FCDE
-:10FE00009D9D37F0725E781B96D59D7EFEFCD8F0E6
-:10FE10004811DECF51A755574279971C9FAEAFCE00
-:10FE2000E67AB43EBEDF4FF45764A39E57C7E5CFD2
-:10FE3000BC5BDF998BFC769E89C90CF8F4AEB327C6
-:10FE4000F6EC0278EC6A4E663B393A0624D087D34A
-:10FE500039EA839C6827BE1EF1019F27E7515F584E
-:10FE60008072F2249B77BD6F605DF4FED34737ED5F
-:10FE7000C5F6D3E715931C117DFE67B17FFDFA76B9
-:10FE8000115CE1F967B365CEBF45939F9EBFCB1967
-:10FE9000C2E71FB4F37901FDD03A3BB475F95E3681
-:10FEA000E793DFCBE67AA4E2BB8ADABB49D7C7D7B0
-:10FEB000760E1D0DE3EA105827DA35EF98996A2778
-:10FEC0003D2689F4A10E1C3BD63F941952A19F9B5D
-:10FED000051640FEA2F3930EB73F3335CAAEE928AC
-:10FEE00081B263C08EEDA8F6672679F09A66421D4E
-:10FEF0005FE74F1D3EFE9E2E9FD25B793FE90F16B6
-:10FF0000EDC4F9244B8CE4DDC239F93B5B483F98E2
-:10FF10004DF3677E7FA600ED9D5C9A6D4238EAEB5B
-:10FF20007561A2BF99E62572BB5C5F371DBECF66C7
-:10FF300073BBB95604FD02F04EC90D527BA06F8C05
-:10FF400023C1AEE91BCF22D246C19949E14978FFCE
-:10FF5000FF43786DC7FAAF0AAFFA66E023A62FC158
-:10FF60004734386E14BACDE99C8F90DD8CF7511E62
-:10FF7000DDE10BFE383B8A1EE6DD554F7AA63EAE2C
-:10FF8000E43B5EAAFA0E433AFC80E86EDE3F25931E
-:10FF90009D6BD40375FB4AD7571F4EE0AFECD6E6F6
-:10FFA000A7E87E596D1CC9C5E13DF703BC529953C2
-:10FFB000463E7ACC121EABC0FBC74CC1275EC27155
-:10FFC0000F1365E02183DA6BCE11A93DBB8E272C80
-:10FFD000E21AED19C093758027367CBFDA42F673BA
-:10FFE000873BB47911E2C90D2314D54B7298E859B7
-:10FFF0006D4EA6FACB4DC719FA9923936519F54CA6
-:020000023000CC
-:10000000C02BAAEF989B1F52B9BF40B593FF34296C
-:10001000B413F1AE040080EDCD1D4DF568AF939F94
-:1000200063AE8DF73718AFB85D5DC078BD4FC3DBE9
-:10003000A5D984B769AD8CFB2924FFB8EA287D6176
-:100040004C0EE723C9A5E1177E8BFAE706BB92C7E2
-:10005000B80988FE0FD69E4EED01BE7C48F8C73821
-:100060005E2E78C0B983F33DA50CE17CAFB39DDD76
-:1000700049FE2B338D7FABBD9BF47093CDEB463F98
-:10008000F13C916DCCC7F65ACD32E28911DE2939A7
-:100090009CAF0DF667866F8FF667CEB3AAD62CACF1
-:1000A000BFDB4E7681EED79C97C2E94AF76B227D83
-:1000B000C6930BBA5FF3160DAF06D5AFFFAFBC1AF0
-:1000C00068EFFF6878A6F47C9A37DFC1E78DFE9170
-:1000D0001AFC05FDD6ACB2BF877ED01AD5DC6D7593
-:1000E000211FB9CA1F8EB2D3D8263E8FE09BE610DF
-:1000F000C2A959621B9FC2F551F9FC572E0C2D8DD8
-:100100009ED7160B9F97FA4FCE98796D71B1255FE8
-:10011000CFBCFE3029765EA72769F362B634784FEC
-:100120009373B7343BDF13C6C115E70557B60AE62C
-:10013000553830AFABD1961B4AEBD9148F0EAF4E6A
-:10014000B88EFF4BE6DBFE983FDE7C8DF3DC93E35D
-:10015000AFCA994474D32D970EE0757033CCAB14AD
-:10016000D77568A885D695E327632E05F9D8CA8583
-:10017000302FBCB6A4933F6B9ED5DB857E5DF6C366
-:10018000146D9E8CF8C0CACD23892E016F39DD3ED7
-:10019000C6E3412BEDDCCFB072B9ACA832CEFFC7BD
-:1001A00064074780BF925ED21CCBD7BF180EF6AC57
-:1001B0009AE26838D8B2E617C75977D54AF89C68EA
-:1001C000DDFF8F18B95DC849EC6763AB62FD14E8C9
-:1001D0006FEC2F8B83CB46BF07637FB3C63EAF2642
-:1001E000886F84BF178D47C7CC1A1EDD6927F9A316
-:1001F000E3D131279FAF118F1868D148C7FABC8D62
-:10020000709C87708C1387007CCA43381ED3EC33F4
-:10021000C0A73C84A34E07B734737E6084DB338968
-:10022000F9DA579B87018FBFEA3CF4FA44F3D0F523
-:10023000DB4DC2F2CD889F9B3299DC4A7A70782CD4
-:10024000DA491E4BA808C7B5C502F40BEDD668FD08
-:10025000932703E6F7A723DC2F7A5CEBD738AEAE03
-:100260001CDD2F1AEB376B7445B6A31ED298C4E57C
-:10027000E1B9434EA21B961B9E87FAF7F9035686F7
-:10028000FCB54108E7E373E704FF7C7AAE25D98B20
-:100290007251F7379E7891FB1B5506F62FFAF982BB
-:1002A000DC5FDAA8FE6C0DAEC3C51CA909EDCFC694
-:1002B000AE58FF1ACCCF85F33D67627DF87C83187A
-:1002C0005A8A26EB460BD707369A5827AEDF805D51
-:1002D0007E3C9FEC844C99A13FA8C1F45EFE8A2825
-:1002E0003BBE41AB6FC8E2FE298C47939F1DBBF21A
-:1002F0000D864BC386339F613CAD619F915E62E981
-:10030000A96EA02C5C14B0BDA87ADF003D913D8E93
-:100310007858C9427902FAD57839B9AA2F8471ED93
-:1003200046CDEF3AB4273C03F505676927433EDA2B
-:10033000789ADB21530EEE7815FD6DEEAABE91A8DA
-:1003400092346AF107A3FD33F9E04322FA8774FB84
-:1003500025CA1F55343BC61FB99ADE43FF16F61750
-:10036000C65BE8D796B89EBB51D373411F26BEB972
-:10037000B0BD80F461D45751EFD0FD63A887A03E93
-:100380003A27B7C2920BF3FC6B6E85903B89F74717
-:10039000763F3A5D267F0EFFD2E0A33F877EB2CF45
-:1003A0008F03707D6A8AC1FFBFE2A74309CF0F2484
-:1003B000D05387E6F6FBFFD3D1FFBF42F0A6239EC2
-:1003C0009F1283E4E75FCC54F21F2F45BF3AF1C17F
-:1003D0006EF24BDFDAC494F514470FAEC172FD1212
-:1003E00026AF47BF746590EAD12FFDCDC93C4EE5DD
-:1003F0008DC25F8C034597D96E28C7F0E93EF27332
-:1004000037400B5B14F423C43EDFC842D325C48BB2
-:10041000AE8BD698763A389C6ED1F065B39DFBB71B
-:10042000A7ACDA21B2283F43CA04BFEF1EA4879FBE
-:100430009AC9BFFA9FDAFAEAF0D89353918CEB95F8
-:10044000847E1F7CEE1E2BC9D99326B604F1E541AC
-:1004500037BB6536FAB3EE66FE5C33E2859C15ED7C
-:10046000EFD2AFEB0FD897209E4DCBE576807E3F45
-:100470009263A632F9AB493F4DA6F83BB0A571880F
-:100480008765D9BA5ECCC6A19FFC3D8D3F35DCE8BF
-:1004900008627B6113E767B372B93F6156AE85D6D8
-:1004A0004F2FF7FB8B343C837EA8BDA4892C26FEFE
-:1004B0007743FFF30F697628A3F96E5C9AC4F5E8D9
-:1004C0007E7C37113F4B2E0E5882C44F2A889F45A1
-:1004D000FEE0F0225CAACED42DC579FC714E12C389
-:1004E0007C85055A7CA929D74DEDEAF1A438FAD7C5
-:1004F000CDDD9E0179A3E3A72E670E38F9BC2F3519
-:100500002FC078AD5A5F44FC5B1FC714835E92888E
-:100510002E9AB57533C6C500AEC9C8670F98B8DD49
-:100520007500108BFC569D5ADC12EC64940307F6A0
-:1005300015909E3D5FF3A7829C24FB2A02F282AFB6
-:100540007770F3427CAE338FE2B9EF9943CF3C85AD
-:10055000F2F610B723F4F53870607808E977CA9995
-:100560000B5908FF03A77F341CE3E407B4B8649D6C
-:10057000A53B9FEC7D0BD753EB5CDDF908BF9735AE
-:10058000BCA94B8232DC1F3934F830F21F3DAF007A
-:10059000DF73D37CBC2EF4379CD0ECC8E36057E209
-:1005A000B8805AFA305E0AEB9D89E5C8BA74AEEF9E
-:1005B000C1B8102F4E1C1A4BF3DB68E678ACEE176F
-:1005C000C83F71DC1C39D50CCF1FCF9CC85A64942E
-:1005D000779F3ED58BED6F179955C6BC8D4F3EEE7C
-:1005E00082E7CF839D8B7EB35A53604626F28B17EA
-:1005F000B9BD6E5C07947FD171BC732C92457EBDF2
-:1006000025D99D883FE70E16513E12F3C84C8572DE
-:10061000E37E6EDF18E3CB27CDB1F86F6C17E7856B
-:10062000FEB546FC8DF23DFAFD38ED7D51F99C3961
-:100630009C7F27C063AA37D8931B65A736BE924913
-:10064000FCF8C4FD9FD07AB2761E373D69F6CFC361
-:10065000F1B92BBB2D3551F8F83B8D3FD75AB9BCBA
-:1006600006FE6B89E6377A7D59058B1BDF7F5BA31E
-:1006700073671F977B83EB399EDFCE9E10915FFCE3
-:100680002ED74BED8DD2F2146E677F3A6C45FDA4E8
-:10069000B384F22046ADEA263E00E325FC3CB9399E
-:1006A00085F823DBC0F175D10FADC43F1681FCE0A6
-:1006B000F636CFCB621B78FEC5A97B7C84CF65ABB9
-:1006C000BBCB881EDC4C41BDE4A5B6F75411EAE76C
-:1006D000EF164A30EF6C7E9B8FEC945BF7F9687DE8
-:1006E000A7687CBDD6EAA73C33F6388FC32D78784F
-:1006F00029F5539FCCDC22E97F210BCAE525BB05F8
-:10070000867435A593F3FF3AA9FB30EA91C6BC097C
-:10071000168A8D2FA33C62517A26CA1F66B00B62DF
-:10072000D75DBD24F96B9437E6BCF8F217EC3D4B6E
-:100730001E5F572E27F60A9C6F68F2B71EE52FEA58
-:100740006A9ADCD3E5E6624D6E9E12B9DC5E647D8A
-:1007500088AEC3F37C34CE5B311E4CF1CF8805F5F7
-:10076000934478315C1B978E1723304966E8005E0E
-:10077000D49DEEEEB5929DA9BC8871EEBA55ACDB66
-:100780000976DA22A989E4C33099C9948F373D48A4
-:10079000E34A5F09FA39ACF3228CDD4EB874BD60D0
-:1007A000901E6090FFFAB8753C31EA7F535685443D
-:1007B0008A33E533BAAF5F65D65982E3ADB671FDD2
-:1007C000BBDAE6E816D1DEAC349F8DB637AA257FBA
-:1007D000791EC9CB11EE53638845306C57F1F9ABE4
-:1007E000464F1AD02B934B236BEE87F6CC6C9C09AB
-:1007F000F9A4DEBFE89BB6B818E37A521FD92B2CB8
-:1008000083C9BBA0BFEB8B395C93611D76005CCDC7
-:10081000924AF033DB64778B1BD7BF8FE23291A112
-:100820008CFC74FA7A6D733215F31CAF2FE6F47DED
-:100830007D31F727C3FB14FF3517C2FBD07EC501FE
-:100840003BD1E5C7FB9D2194CF207746B9A13EED72
-:10085000F760A740F9DC0127E929E73479E1D1FD08
-:10086000B56C0DB5779386372AAB188EF60813AEA4
-:100870001D0E6367BA9E5CEF4E14C7D4EA7D7D37C8
-:1008800072FCB592BEF0B13BFC7D2CC37828276783
-:10089000B686578DFBA697DC85FC3BE05038D483A9
-:1008A00025A8FF58C5DB6EB401B06788AB2277225C
-:1008B000DE8F74C85678A572D4BBBF990BE53FECA8
-:1008C00033332BE2CFAEEB52BAF135C99F11183B4F
-:1008D000783C4B43E6E3E1283A5EB63BB65CDF1971
-:1008E0005B6E64D2F17014FF6F7E77E92F5E8BC26E
-:1008F000B7BBF29C9E53C90C7D6FCA45A0A79377E6
-:1009000077B113280BC5EFA6207F5C00E41F4FAF23
-:10091000F8E4EE25BF780D9E932C15AD1C9FBC16F8
-:10092000A4AF1AD01BE2D9A125797C7DADD6A6D380
-:100930003B003ED697AD4A0BBC352B2FB801DF6F7D
-:1009400030457A715DADA3CE8E437F76C5A80B94FA
-:100950004FF0F13F3305E1F4B17D1AE1D3C79BEDD0
-:100960005EB4533BB21CDC0FFB8A1012B8DD326B55
-:10097000521AE68BD05C808F45D66C463E3DD92A14
-:10098000AF9669BA3613AD37586F70EDB0A86BD01B
-:10099000AFDA0106648B82765E9F0B89E197B88E91
-:1009A00088DFE2B3161BFCF4B5F98B5AE0B9658118
-:1009B0002486797CD2675200F1EC5E6C2ACAEED9AB
-:1009C0009DC7E54FBD2D6C9906CF355EB8AD6AA8C1
-:1009D00069C0CF6F3507FDC361DCE6AE92EEE17012
-:1009E0006B71F374B2EF80DF72BE7888F3C5C577A0
-:1009F0004EA3FBC2EC2A9AEF29982FC2E5D5CD561B
-:100A00009AEFA9910EB2B74F6D13A8BC58B6501EFD
-:100A100020E82743A679F0BE59B6B2C1F068DC746D
-:100A2000EF9ACD50FFF34C910980FFEF6FFD09C5A0
-:100A300023DE67BC7F759F487ACFFB72A4AC1BE1B5
-:100A4000E96D7245DB938BB78901E4978BB7DDFEC7
-:100A5000F3C908B7D93795223CA6BA6F4BF33A06CB
-:100A6000EA757D4F4A2D7F0AE972EA67D3FBA6A299
-:100A7000DEB50DE806C62D995810ED8FD7B65D4D41
-:100A8000FAF6E2EA2437CECFBB75D70C946FEF5756
-:100A90000F33D1BCF6084C4678B89BD3F0FE6241C8
-:100AA0000AC4C3AB45793C9E306D9443417FC3E299
-:100AB000B744C217A0B31B318E50BFCD4CFAFC6BAC
-:100AC000B3DFF9CD5CCF009D09B337CD9A82CF3F1C
-:100AD0006DA6E7FBF5A9AD1FBE8B7E01FC03C98E99
-:100AE0007288E067A43BEBA855F9382E23FD2D5EF4
-:100AF000DD94CFE3FB9746876C2BD021F0E3B34026
-:100B000027174D7F171DFEF952E8908D488D91DF14
-:100B100083F99E4ACFE9F1519BC2FCBB1C940FE3C1
-:100B200017805F8FCC97884E46E65BE839E9BF5661
-:100B3000EC7E13E0F4785ED0928F7A17F397A07C66
-:100B4000F646E40A74C53A34BD916DE5F9E1685F93
-:100B5000E0FA6F1CCA9E5A1FE59FC9CCD7ECC0BCF7
-:100B6000600AB673EE77177A71BD1AB2CE8E43BDA6
-:100B7000BAF1D33F535E85E320CFC7712811CA5322
-:100B8000327B02848F3ADF6F54B81C32CEAB2D9F7C
-:100B9000DBAD8D9E08B5B3BF80D3BB1E8FDCD29C6E
-:100BA0004471A12D9E909DFB5940DF83F667968A84
-:100BB000C4676CA5AD0CE5182B17299E33F5C22F21
-:100BC00018C6BF7E7EC57405F54A47E9ABD2109CB6
-:100BD00067B959AB7F7E6D36D4FFE28AABC83E5A07
-:100BE00091217A51AF9A599AA392FCF4F3BCDDA9F2
-:100BF0001752880E672D9D457AA53EDE00B3791DFC
-:100C00008027B38158A3F39B675D61F73AA2F0EBAD
-:100C10008FED4215D7ABBD29D78FE57EA1CE622ED1
-:100C2000CFA3E1B022C342FDFF3577DA6484EFD46D
-:100C30002BF93A7CB0C71A5A0DFD7E608F6F47566C
-:100C4000E5737F6BB6740DF1A5DBF658293E7F4640
-:100C500088FFFCAD6B45CA2B5ABA566021E8EF837A
-:100C6000675ECA42BEFE875D2F65D5448D27D1FBE6
-:100C70000BF313F977BB1744DBDB332D3C2EC02677
-:100C80005863FCBB335D5A7EFE978C777C2BA19F0B
-:100C9000FFA72370BC6FF6FBF9DF18111DEFE88F7B
-:100CA0005B29DCCF6F8C57E596FFBB365E9E0FDD70
-:100CB0002C69E355AC3C6EB190C7C5571E1A4278FB
-:100CC00037D3127980E259AF88B216D7F0DBE8FD4E
-:100CD0000C5E9F605ECCEFCFF59491BF89C6237404
-:100CE00009DD4ED757981FE3710CE3FC6A0E8A7139
-:100CF000E3727F2D9079BCB3384276D5F1379EC030
-:100D0000C87B3FBEDB0FFA4CD179F4FDFAAC86DF2D
-:100D1000D7217EC3FCEC6B7939115E27E25719F9B4
-:100D20009C8E75FC3EBE362705F1ED1E5B43B81761
-:100D3000E0E71753987D1894B5F8BFFA2ECF6315E6
-:100D4000A3EC1CA4836DEF3AC9CE6935373D8EFB09
-:100D50007ED41689ED82FB9EA486500B94BD662737
-:100D6000E54DDD91346B07DA7561507005287F928F
-:100D7000746C07EA09CC96C2CCD08F5AA1BD6FB172
-:100D8000C9ADA05F3C96EC22FED2BC8091FC4E67C0
-:100D9000DD82000039989FCDFDB4CB5E1428FF188A
-:100DA000281EF53E2527BE3EBA57A38B5F61020D74
-:100DB000C6E5A7C77FEE60BEEE179382E1283BEF42
-:100DC0005E41F112DF813FCC8F34B3BEB9C497418D
-:100DD0008FFF05C883E1E28FC93F7BE2EEE0E3F1DC
-:100DE000F649E8D705D3E3DBE9AF6BE32B6C174299
-:100DF0006617D1AF69470CFD6A713C679A0212060B
-:100E0000E3B73C4E97CBF47CF94DE8B71F56CEC7FD
-:100E1000E8F28719EA1719EDD7B0E010A4A729E97D
-:100E200028DF562E8CF5A765D4ACCD24BF5ECDF758
-:100E300067A1FCDE6476AC1552F01AEB8FDB64F030
-:100E4000C77D115FC84848379333D0BFB16920FED2
-:100E500047F8D33A5F0E8902CD8245C7B5D35ABD54
-:100E6000BD41D483A6D9949DCA60FA61E54A06CEF5
-:100E7000ABBC80C34FA7E7460D35858302D9A58358
-:100E8000F9A106CFFA11044F7BFB1D64372597703B
-:100E90003F76F2D29A20F29F64E03F68C7592C4D0A
-:100EA00002ADFF146EB7AD147879E5345956E17987
-:100EB0008B4BCB97BD96E767AFB40783D1F1B4CB2B
-:100EC0004D2BA645E7E5CA0CDE473E3C87F737D3F6
-:100ED000B68AE705074147CA1C80638506C7DCF26E
-:100EE000249EA77EBB8DFC5B5BEDED345E9397DBB0
-:100EF000D935EBEDC4EF868B851437E93173FC509F
-:100F00009D36A257A5E76DCA0F1B7E598657F4453B
-:100F1000E1CF6DBC5EC70B66C82BB058BCBDE8BF47
-:100F20008381289897B252F0F656D0BCE488AAE0A4
-:100F3000BC35BE3C2E89CB11303733385C795CCC64
-:100F4000B05E8037DCAF3ED6C1FD462CE825BDCB78
-:100F500030DFC178B3BF10F96D4F3FDE7415C6E3C3
-:100F6000B70FBABDBD3BA3F18579D7A05FF53E139E
-:100F70008BAC8F873F4AAC9D6FCC9333DAFB0DCDA2
-:100F8000D3039AFDA1DA683D2D647F34DC392DC08E
-:100F9000ED8FC216F43F35AE024905EF4C3F28D81D
-:100FA000B0BDC6392EB2BF1BBBF652FCBCA18A290C
-:100FB000388C1ACD3FACCFF3B899C7F14066756253
-:100FC000FCBEC31DDE8EFBF23A96EA793C3CAF458F
-:100FD000ED12B43C1E3DEF2B720CFD9F1D8297FC61
-:100FE000A0FDFBFB60FD79FECEA5E581398B033EBC
-:100FF000B4C42FCF7BE29749932E218F563DD381E6
-:1010000079B289F3685FBF01EB6DB8165A3DA20152
-:10101000E8CB7AD96FF762FECE40BD0476A7AD4B20
-:10102000E0EFABD7DE709544FB72B4F2A147D01F5E
-:10103000FEA09DC5F4173D3EC9D03E9A960EAFFE68
-:10104000FCB6D9D8DEA313B4B2FAB787FD30BE0719
-:10105000CDB1ED11CA68EF6341EFCF3BE6998E0D3C
-:101060002306F476D0E3EF2E9834A0BFDFFBCECC7E
-:10107000F6F1D057B2FC27DA07A5EBE18D1E9E579B
-:101080006BC4F3F51A1F037B7806AAD6F7CE591E58
-:10109000C076FBF3DE0ECEF7A31DACE7BD35AE0A7E
-:1010A000D07E28D0FB1F28C03CDADF9D3D7598A17B
-:1010B0009DF901F9031A3F95B8DF19EC0701F0C556
-:1010C00076F021C21FB6DB1C42D74E875B65888F46
-:1010D0001D878449885F8C3565DD00B03F55E0DFB2
-:1010E00088F33897203EFE7C01B7DB1B0B2B36E7DD
-:1010F00023AC9F1418EAE3EB0BFF487645C3FEAB25
-:101100002645EFDF5BDAF528DF07B6DB1C77DECF9D
-:1011100017883C8F78FF0B143FF9202410CD2D91B8
-:1011200042EBD0DE5CB2C48496152B0DCDA73C59A2
-:1011300036C7C270FC8F1670B834EEBE4EC5FD8443
-:101140008DF00F48806D092C227D7BCB1C9B03E327
-:10115000D88D8535CB89DFC9497E34E58CE3ECCF6A
-:101160007FBB3389F268D67799ABD04E2A03BAF8A1
-:101170005707F2D5A3BE1DC83F874C105B65CC3323
-:101180008CAF7FBF50C4F5873621A07EBB94E2228E
-:101190002C3A9F795417B7BF7A0B2C31FEC9DE0267
-:1011A00089DEBB42ED9B8EB8F68A144E467BB89121
-:1011B000F93F42BF170B38BC1417629DE40FF4DCF3
-:1011C000ED25BBC9E609DF371EEBAF90C86ED2FD37
-:1011D00008E7F6A7933E36A530F82BC48B3231FCD6
-:1011E000C8B7116EF7495A7C89F395ACEB1C13D044
-:1011F000BE327BB83E63077D06F7895CB9EEE4CF6B
-:10120000A6236FF504488F6020E470BFF9749BC07B
-:10121000E32B06BD99C94A25BE3F43F34BE7C16A9C
-:101220009DB2116AB65D1C82FE0C8F8AF07E032689
-:101230003004EAAF62FE365C97BF6A76E4460BD7AD
-:10124000D7379A6CA4AFEBFA70B2A78FECC4FA4E02
-:1012500081FAA92FFC31ED1758A6E5A5F7E7874BD2
-:1012600061CA973F5790ACE96F6DDC1FC5FAC81F84
-:10127000C69EE5EB009A27E5D1EB70D7F3CAF5F6E9
-:101280002C5ABCB45EF3E702C0A8FEBF0A74BD705E
-:10129000B5165FD5F3FE79BF4CF29645FB1D375668
-:1012A00033D647E3F2BA70BCF7A4054C85F0FE7163
-:1012B000C063C4B3E36B9343B8DF6BA3D0E7C7B895
-:1012C000875AC2E319467C4A2FE4FDA6F4446650CF
-:1012D000DED5FE04FB8ABA62F715017F58FE3AF4A8
-:1012E000535AFA8E82F8FDA05B7BFF1A46F9E4C6DA
-:1012F0007D45230ABDFF3BF71529827F275CC71672
-:10130000BAF9BE217D5F91C2D74BCFE330EE273AC9
-:1013100097D92DF1FCFFF0F65D242FAD6417BEFCCC
-:10132000616F1BFA99CF975814DC479176D31B6DE8
-:10133000944F23484D188F34EA034FF8A65F563870
-:1013400009F7A5BDA850BEB0411F48E407A05869E1
-:10135000949FE89AC2AFD70F606FFFC485F87646B6
-:10136000883C8079ACEA21316E1EEB92C244FE00CB
-:10137000FF9C68FDB44DCFF77227C5E43FB625C882
-:10138000F74AA4F74B09F3BCAE21FDADAD3FCFAB9F
-:101390004AD7DF62F358E5A4CFB597F5FEABC2BEDE
-:1013A00098B8FC3F6B74F2C5F3D4EC9804F34B642B
-:1013B000B75D6A9E81110E6D09E4E83D85F1F7DFA6
-:1013C0000258648CCBB7615C1EAE92C054F29FEDA4
-:1013D000EDCF33E8267FF10B05E4F7B226CC33E0FE
-:1013E000F967D2A1022F3E77AF39E0477B46DD6B2C
-:1013F000D6E440E819F49BB41DCA243F1B2B0C8F84
-:1014000043FE28B96764E0B9066D1A7ED67DF93CC3
-:1014100083C791CF19F30C7684263C90CDEDE7BEBF
-:1014200064D0CB76302EA7D483DCAF09E326BF5E31
-:10143000E4FE91A4AF0AB36D348F13AF58775A49C5
-:101440000F57286FA026439451BE7454979D42F9BC
-:1014500075021457A4E3DA5B5791FD9A687D6AD749
-:10146000C6C671F5FB5F769D5E29E4FACE71B4EFD6
-:1014700049D0AAE42F5EB256384CF9BA8638723792
-:10148000F2109213B179011FDBA7513CF6FB0F5705
-:10149000531C56DFB7ABEFD7655ABCC5BB562239D4
-:1014A000E1DD2D84BC3E4E2626B2ED65139D1F0264
-:1014B000E26D0B8A4415A8E632B82D9804D453BDCA
-:1014C0006D504E8779AD93D40C786EC7DBC9E47F3D
-:1014D000BDD7E3D5F65170FB4BDD2090FE07ED92B2
-:1014E000FDACB601DE403BE1421E17F8B490FBA70D
-:1014F000014542341EEDDAA6E551E8FDB53053371B
-:101500005E4D02BFDE2B4B55F1F43BBDBD367393F0
-:101510000DE32D9191268A677E6CF1CFA178606AE8
-:101520003E437BB1CDD9B4B68AD7130FFDD81E097F
-:1015300050FD37246E28306F2A8EF7371ADD18D702
-:1015400075617B6CD918EF379E4350CB8205993972
-:1015500083F7E5FF4693871FAFF769EBA250BCBC4A
-:10156000CDECFDA50FE5E33A89E470CB080E37D347
-:10157000487ECD7657CE2139EC06FD94C6CBC79F69
-:10158000FD0D8F80F4D7E6E6F8F555C73DE81C81E0
-:10159000A27C1A6F1B1A0DD05FDB3A21C4E1C5C7CC
-:1015A000FD65FDD559455FAF9C3A21284F75239EB7
-:1015B00039423F44BF5F6D8B55467E7646D0E87F0B
-:1015C0009D48FC6CCB92542A1F5F9B477EA07EBA3D
-:1015D0003DBD66399EAFF065F3B694228E173F3756
-:1015E000F8E16ACA85A3D88E11EE8850922E7FE06A
-:1015F000D5E9D715CF40FED86062DE74D407D61A7D
-:10160000F2430CF43CD51BBCB208ED0F4B5F2FE747
-:1016100053E17C89F46FBB82707BD47462EF4F100E
-:101620005FF6DA29DFB06155E429F457BABDC1ABE2
-:10163000F0BDB377BE3343F05273A4279D3F5440AF
-:10164000E775D4B419CE41D8109B97C2D6A6F2BC88
-:101650008F8ED8FBB85F3FE6BD41F92AED9ABE1DDB
-:101660002C42FB62EA953CCFEFC3A5268678F1A118
-:101670009DE38F7ABF5393334A7EB45E5BA3D93721
-:10168000FDF871BF9DF0A356DBE7645C8F7AC40F51
-:1016900058B73A0D3F3E7CE1B27CC48FB37B2FCB71
-:1016A00047FCD8686EF7237DCDC90D2E2A82719D27
-:1016B000BC2AD06BE27C29FF52F0F676E3B8FE41FB
-:1016C000FA55475122BDC3FBDDE8784B8F99FBC922
-:1016D000547BEC3EA19E4BF4AB26F68F15E5C6FA83
-:1016E000C70A73E3EA5736FBE7EA57973E0F46FB14
-:1016F000C4F4384C8F33F2C05351F05A69E7F928DB
-:101700002B8B64592DC1F9D5E4D0BEB3DFD9949D9C
-:10171000C2D73ACF183FE02B1772D6B4E338FCDCBF
-:101720006FF98AE4EDBD1CFA7D8571BFA571DEBF3E
-:101730002DE0F933BADDADDB81C6FE0F68EBFDB3FA
-:1017400022FF21B4ABA75EB8487E84D3782E0FF475
-:101750006B0BFD2BD973ECA020D3BE352F8F8336B6
-:10176000EC5FF804FA5D9786B4F8E53E81ECF5A5E8
-:101770004F7E44F5E7BA6AA9DE7150E8C63868E3DF
-:101780000813C96D3DFF41F7FF341E2C21BF8FEEBA
-:10179000FF8171EC473F4DB2276221BE85F625BC23
-:1017A000D720F1F86E8387292AB2DAAE58BF899E16
-:1017B0001FB52560217ADF725008A13D9E6609FAA7
-:1017C00046103C47C894DFA2F18DB78BFC17905FA1
-:1017D000E9F96B7B72FCEF14F1BCB72CCA93D7D636
-:1017E00023D81F17E2FB2CFEF26BBECF229C805F3A
-:1017F000FF67919E677B23E9CF7F618194F8F9E7CA
-:10180000219E7FDE9FEFC6F3CCEB6632B6DECDCBFA
-:1018100078CE4C3D9E33A370F9D96D909FD165CCA5
-:101820002FEB8EE29B75521FE5B1EBE7CA60BE5904
-:10183000F4F30DB84F2387E79DC5B4A3F1D37471BA
-:1018400005C57FE2C45DBF1B6D7F1CD1EDAC127D71
-:101850005F4DC482FE9D952D9E08C6118E38B5FD44
-:10186000BE5A3EED4A7BE404FA3F563E934EFB4798
-:10187000FAF5FB3D56CD7FCEF1BE8EFF648D4B8ECB
-:10188000939DDF88FBFA85017A9A99D02EFB692E09
-:10189000C6638EF4DB656FE4E2FE1B9DCFD6299C08
-:1018A0005FD475097C1F5667EC3E9CDCD15FAFBEF0
-:1018B000A03F97E8FD8AD189ECD92F8233E7B7475B
-:1018C00012ED5FD2F8A40E47233FBA54F8E9F5FDB4
-:1018D000F003BA267E6B809FD18FA6FBC3589B4C2A
-:1018E000FE32D0493A319F53F7877D5979F89DD11F
-:1018F000FF33F2F0FBA313C9C3AFB63E89E4C4A51E
-:10190000AECB207988EB332EB13CCC2DFF776DDC4C
-:10191000C63C046DDC863C8423E6C82C7E8E05C064
-:10192000C737380F2121FE7D411EC2DF314F431ED4
-:10193000C2E7CFD39887F0F8A1C75C18AAC3FD6AA5
-:10194000E877E8D965A6F8FB0CD1E1E7F96122CF89
-:1019500027657E3A8FB3D16627FF82317F0E38D557
-:101960009A26D42FCB41EFC7FD3CDB5A492ED767CF
-:101970008AE4ABC47C41D91B273F53AA4EE9F60E3B
-:10198000CE13C3FC773A17E012F3C4F68EEECFD72E
-:10199000F4FD9DF99AFB477F893C31258FF3A757CA
-:1019A0001D7F1A127D5E66453118EAC589F3F47F02
-:1019B000A2D14DB296DF6B935416ED8F4AF4DE2F11
-:1019C00046737BE7554BE4ED4ED4ABA0198C7B6698
-:1019D00058C09A2E1DD8EF7EAA207014F394411F90
-:1019E000A1F53DB7FFB7E4EF7F3C93C99837FFB847
-:1019F00059A575568732C26B3D9F41EFE72ECDFF4B
-:101A0000FD65F9CFFBFF60B9208DF9EF910B5F1BEE
-:101A1000DF1994F7C4E9F1EFE037447FFDFCC4CC53
-:101A2000E341FA79175F28E7BE6E3E63C8D74834B2
-:101A3000AFBF1630C29FC23181EC31E417F3939FE0
-:101A4000F152E55F7229E843088F7D562F929A4D37
-:101A50003BD7826DC8D4FDA2FC7CC1074792DEF95A
-:101A6000A19D8F573FAF439FCFE5630CF8F915ED6C
-:101A7000582537F08D3130BF93D3FCB4EFF75E2794
-:101A8000D7DB22CFF0BC77E3F9134037FC3C0EEDF7
-:101A9000DC5FE33EFA6F1BC7F70F92DF0DFFDBE958
-:101AA000E812E5F7A5CF23D69E3DE2E4798503F65B
-:101AB000EC7FDBBC2E495EEB79C665157D9ABF5F76
-:101AC00060E8EFD7FB69ECE3FB741ED2D653BFFF8F
-:101AD0005BCDBFF7D618FFC388AFA5A5DDDB71BF0F
-:101AE0004A0373318CBB3774DEB1FB4D0FDF7F4B84
-:101AF000E5421EAF640107EDCF7E3C2FB8750CC9DF
-:101B0000C1F01AA4CF511E56867183F585B359AD25
-:101B100083F21042583F6A5578FB9BA59487D58481
-:101B2000F4AAE721975DFCD39AAA521A2FF97F3DB8
-:101B3000D6D8733B0E8FE1F24CBFBE3246D0E2AE38
-:101B4000FE4C1CCFD9257C3F6AA3C72FA31F598FFA
-:101B50007B277BFB286FA0611F378ACAD056C4FA47
-:101B6000BB46107D35EC9B5682F150D6692FA1F310
-:101B70007E7FCFCFD93E7BE730F2374E290CBE8433
-:101B80007CC9591ABA06EDE851D00FC64DCFEEBD4B
-:101B9000A62418876FA68BA92AC695D345D6F9889F
-:101BA0003CC0B7C07E9E4BFEE23511F2633D3D86E0
-:101BB000DF6FF470B9DE78B09A2D740C941D9ED846
-:101BC000FD573F2BBAEA691CC7D363242D2F93E737
-:101BD00081FA400D43BFA1119F7C5A1E68B596E75C
-:101BE000CC54DB407E73F617E781EAE3D3CB7A1E51
-:101BF00068F2A7DC7ECF962D9437E25CCBF92A5BA6
-:101C0000C5286E7045A46F7A0AC029B7A3FB0A8461
-:101C1000530A829DCE7F0DDF371EEE7B864857A08C
-:101C20003F647BF3841ED47FA5757DDFC025F1B6AC
-:101C3000CB15E8627C3C2F7082E480D454887CA968
-:101C4000E22D33DFA7B42E99F4CA8EAC3ADAA7742A
-:101C5000EE1D6BDC7308F4ABCA566760DC217BEDCC
-:101C6000AF282FC0B94F88BB9FADB2D8A1ED635A42
-:101C70009D81710CE7DA3EB51CDACFBE5F609A1920
-:101C80009D2964A07F5832A17CADEDE2E7DBD5B69B
-:101C9000BB2B6C246FB8BF865DE1213922ADFBA65A
-:101CA00009F984D4025A2CCCF3F2621E9FCEEB9039
-:101CB0004D28A7FEED33316E1CC9563CB0DF05C17F
-:101CC000556F8DF466F806F27CF47D2EBABFA75FDF
-:101CD000FEEC9B4FFE9E4BCFEB8EDC4C79839FA599
-:101CE000517C65A68BDB232088B4F35D62DF1F7413
-:101CF000BE8BA6B7E876B1910E8C79D2B9E5C388D0
-:101D00002E808F766E9163F85EDC7CE96689EBDD70
-:101D1000300FCB4A1CC7B40C05FD735F363FDD683E
-:101D20004FF7EB399A5EA28FFBEFCDE7D6EBEB30A6
-:101D30008F3B8EFF43D76BDAF47DD09FF1F3B7462C
-:101D400069F6C4F1F57F1DC7CF39D4F346427495C7
-:101D5000CCC03F097FC257AA8807FBDCA686628AEF
-:101D60002F35503BEBF8F9FEA3D6E6AC2E2FC5ABD2
-:101D7000CC0480F7F103CB4651FC16E8222F0E5D10
-:101D8000BC3FC6CCDB5F974C782C3DC4280B52720D
-:101D9000A7111E4B8F727C7D6F0CC72F3D6F4D8F2F
-:101DA00003BE35263817F729F69FCBD19CC4CFE563
-:101DB000D0F2BF9DCDEFECC1F32EB66B71E09E5714
-:101DC000C6CCA6F8DC3A4940FBF063F7FC51E8BF0B
-:101DD0005BA0E1B953EA63B2239A5E7B68FF60F6C9
-:101DE00021BEEF49D2F254A5759E1D889FA22F48AF
-:101DF000FB24BFD1D62D521E947CF2912A2FDA1DDE
-:101E0000110BE6AD7DD0224556BB497F8AF193196F
-:101E1000FD5E4CEAA4BC9CE6E27FAC1DB2B138A1E9
-:101E2000FEF495F65FB02FF04F7D55BC4EE49FBA9F
-:101E3000F47918F75D70FB84BDC2F39BE2CC2BC62E
-:101E40007FF9B5CF4BF75B1AF3D506D131F77FE8B1
-:101E5000F6901E7F607E35269FBCC72C77A3DE835D
-:101E6000F9B92F28A8573F6D8FCE27FB370DEFFB11
-:101E7000CFFD63213BEED73FAFED376692B216E35D
-:101E8000A07788CE76B4EF5A31CF1FF54B84AF10D0
-:101E9000B5DFE15D27E53D344B7C3F0453F97E8A95
-:101EA000950B9B9EC6F757B6A4CB087FB5A2E979E0
-:101EB000DA2F61628156B87EA27DEF421F8F9EFFAE
-:101EC0009F487E0ECAFFFF82FD0B9909F62FFC8703
-:101ED00086F7850B18ED5F606BFD3B705C1D2D1266
-:101EE000C3786F6A152F8F926CF4FD153BE6510F86
-:101EF000A1FDA694EF1C017862DEB61DF3A887E071
-:101F0000FE127ECEA130BB8AF02F15E0837A41AB62
-:101F1000999F6BA8DEE0207C9A5EC5E397A9010B30
-:101F2000F19FF34CA1BC7B15CF3FF3209EAD26FC67
-:101F30008C38D328FE9A9ACBF5487BC062B2F92838
-:101F40004F9AF03522E879D29CEF75CCF752FE7AA1
-:101F5000FF39870B19ADCFBABC1999F8DD8161D76C
-:101F600059048CD7E872A642C38F8E1DDAFBF5FCAC
-:101F70007D3C0711C7C756F2F7FBCF41FC1EAF6F80
-:101F800096C2748E10E830DA397CBC7EE5DC34A26F
-:101F90001F51DBE7CA6ED2F2F4057EEED4CAB9C394
-:101FA00078BD8BF341766B9226CFB5F76F4F0D69F5
-:101FB000F1029E6FBFD4A49D1FD0CE62E2B91A9DDC
-:101FC000A57EC17E8D8707F2EE899E5BAF9129AF1A
-:101FD000503FC7B1C261E1FBB86CB174F542712AE0
-:101FE000C7FB72C586FDDEE2F3FBC6C6F50F87E6CA
-:101FF00047F395613A5FB9D562B0CBD2395C5D9158
-:10200000ED7CBF97F592ECB2C471C5673263E38A89
-:10201000BB33A3E38AFAFA562CB1105FE9707B5FF9
-:10202000C3FCA32D005A3C17CF38EF2DFDE75B878B
-:10203000ECA8971AEDC12309F28CE68FE5768F9212
-:10204000C00F317F6C22F992204E5B62FD6F8A37A0
-:1020500073FEDB93607F5F3FBC74BDC9668C7BA859
-:1020600097E4F7E9B1FD80F8A0BF5562F62BA16CAB
-:10207000D88F067C90F8A2BADA2AB77A908FFE80C1
-:10208000F8623358AED628BE08E6E865C88F7BEE06
-:102090002EA4EFD9BC76B742D7F376A1531C8FD7C5
-:1020A000C83CD498163F77F8463CEFF9BC3392858C
-:1020B000E743DFF3FC9BDFA1F2D0C8312CB73D270B
-:1020C000CDA1725E643B9E17BDE5B935BC1E696C3F
-:1020D00018633F187BD77754077D7F614D1FEAF760
-:1020E000A5863C7EC3F9B5B8DF14E793EEB050DCAB
-:1020F000375DDBE7CB2A35FF10667A21DD65965028
-:102100009E9E8379F7F561FD082E77A1BE05CF4726
-:102110006DCDF3F13834E37C808DD0F238585845DA
-:102120007F54ABCF4DEFF7EB77FBAC5A1E18EFFFA8
-:10213000E80BFC5C1F7DFF3263F248B41B1D5E168A
-:1021400053D6CF8366923C12CF6F6DD5F0402FBF30
-:10215000941E0C8D8DB22B8F5E754731CEF3C31755
-:10216000EFCA457DEA6AED3B5046BC6A1CCFF17B65
-:1021700075F2DFE6211F7F5B7429E43F480FFE08FC
-:10218000F9C6424FCB2437E04FA53C8DBE373345CF
-:102190009D2B205F715FCFC7E7AE0C080B8B07BE8E
-:1021A00043333428919F9E053B44D4B7879E0CC887
-:1021B000089F3A5B244B82767EE309BE80E3FC787D
-:1021C000FE7BDFA7BCBC61478FE1B99247CDEDD361
-:1021D0005D884F3EED1C6126D1BE9ADEE1A3766A92
-:1021E000DFD3E1FB6BF2042D0EDB5D8972E15AC691
-:1021F000F116CB58FF4DED9CB419323F777346A9C9
-:102200008FBE8F368B4524C487196F075C0CE9E3BA
-:10221000FA6069BC732BF42BCB307BA3E9E71A6F10
-:102220005419FE7DB330B6FC2D25B6FCEDF2CF0A75
-:10223000A2CBD592FF9708CF97052E7FD4C95CFE1D
-:10224000C8AC7335CAC71F35C91328AEEE11542C5C
-:102250008F796918E525B10C9ECF30DA951DE270B3
-:10226000C8D98AF38A809CDFE9C1EF2CF1F3AFD2A1
-:10227000DEB6ECC0F31598D7BB15E9F0457321E540
-:102280006DA6396AFEB585F41927CB233EE5DD4AF4
-:1022900078EDB479F1BB0F879D3C1FA1F52113C5E3
-:1022A0009B0497CDE487E7C49D1297FFCE25D3B159
-:1022B0005E2C83050159DDE3E6DF6D6A9DC4CCAB7E
-:1022C0004B70DD94B7492F72DA28DFBFD255F85D25
-:1022D000AC175D163A0FE2B0B32CA8F5C7B0FD27D6
-:1022E0009D4BE87DE4D16630C87BECDCBF2E827D5F
-:1022F000BC9AF74FDF67135730AD7F1BB360B986C9
-:1023000051FE7E8F5BE6E3BDDD44F110ACBF92C6AB
-:1023100067A37AFDFCC281FDB2D3243AC75D605A3F
-:102320007CAC85CA8F697CB0D52C1F463C55FFC05C
-:1023300018AE47A5EB53A203D1E452E8BC1D3FCB36
-:10234000F5A431EEB380E7C534B91BF3D9C5152E1A
-:10235000B29B51F3C1FAE1F893E85AF2B332CD35AA
-:1023600043FDF98F231E8F125800D723388EEFA319
-:102370007DC2747413E55738025605FAB1DCC4689F
-:102380007D95E4F8FB64C78FE3743A78FDCA323078
-:102390008F4370957BF1DAEA2CF7E2BE9F1EB7926D
-:1023A00011882AC7599710E2CDC0BAD8BA4DE37048
-:1023B0003D142FEA175FDC1ED43B703E1A7F1DA62A
-:1023C00078D10ECD75413BC0F79521F1E7111CC7BF
-:1023D000FD8B9DDAB97AC6FA99E34C5FF73C0DF8AC
-:1023E000F715E799163BCFAF719C61E16B18A79881
-:1023F00005E3730C8C0F7ED2395FD73A4C845FD7DC
-:10240000EAE72D15C6EEBB30EEB3606CD566E4335B
-:10241000576BF9A315C9FF4C7EFC6B40CF47B9D66B
-:102420009BFC835CCCDF9C91D2D2C689A3E9EC42B1
-:10243000E4C73681F8CE3759F71ABC7F7E5AF0715F
-:10244000770EF1FDDBC60DC5F3538305A950FED011
-:10245000DC9EBBDC477CF1F67193709C11A2BB6BD8
-:10246000F17B6C487733436D58863E9AE8DC2DA0AB
-:1024700043A45B9D0E078F1FE8129E1FDEE4A2FDA2
-:1024800050DB58376D68CB60ED02F7B73491DC62F2
-:10249000DE9103F304A29D616BA279FCA44525F9AA
-:1024A00070B5FB1109CB4F2AC1F538AE39E33FA215
-:1024B000F3F259C6FC02B43B61BCF7E13CFEA7C68F
-:1024C0003B789FFAE7EFA3F847D9A3CF6B74ADDB56
-:1024D000A39E24D027609C5EC1A530D01FFBED5386
-:1024E000B38DF21206F6F5466A69FFB09012407994
-:1024F000A6EFEB35F2DDA95772BEFBE17297B29AF7
-:10250000CE39DC4D7669E3F50E7DDF2FE95F8D4B2B
-:102510004CDABE5F81E44A03B3D1B943FDDFAB833C
-:102520003F216DE0BB1E0770FF6FE9E7EDFFF5D2BD
-:10253000FE6275158FD3F7DB77F532B75FF5EF43A2
-:10254000DC9EAD9FE3CFF594E5EC4BD9B771F60572
-:1025500093DEC8524C9AFDCAF5858EC95E59651442
-:102560005FE57AF85C0BD56F4C0AD1F7566AC576F1
-:102570004292E3E3DCBADFD34EDF65B228F9C82725
-:10258000F438EB9CDCE07F225E2F2CF66709309557
-:102590005A0B8F9F021D6CED83B7AA58D393F8BDD9
-:1025A000AE6B58D3AF4D3944076710DFE78CF9881D
-:1025B0007FC76B800ECE623B36C6FD01D76A71A223
-:1025C000973F7CAA0DD7FDBCC0F8FEAE42E3FEAE3D
-:1025D000C09FC7F17896F63D9E58BE13358E936620
-:1025E0003E0E8F28D2382EC41BC7203A6421EA1F22
-:1025F000D6B789F69F1BF0C8381EE1E01DB43F6EC8
-:10260000EBCD4C1627A31CEFB3233C472046E4E058
-:102610003C83C9E327913C0FE2B968BA5D3D68DCB1
-:10262000A283D6F5C6B9FD793AB332CB304EC4FB9E
-:102630007D2CB9E151F47B34DE6C26FE5E7D702C7E
-:10264000E969BDAA55C6244856C9F36B14F80FC7EB
-:102650003587F9AF72433BD7C9D574CEDAF5338DE0
-:102660007939EA3D4DF0FE0D5A9ECF8DD79B8F47AD
-:10267000EB9BE7CD1BCC0807B5D6D1244EC1F6A401
-:1026800081F77D83E132E89CA736CE9F18E839D8E0
-:102690007E6B7927F1A7447C6AFC787E2E14B455B2
-:1026A000F077E6FB5C36FE4BE4FB4CD0CE857ACD72
-:1026B0001CA1F33B5F1FBA78EB729867C10F8BE9DF
-:1026C000FBA557A52D7DF221283FBD6534955F4FB1
-:1026D000BBF9B6A358BF3D9FCA95A68FE6213D140E
-:1026E00096CDBD16BFFBFA9A9DB7939114ECA886C0
-:1026F000E732C6654FC003612A2D117AEE9BE3EBEA
-:1027000027A23FA63289978F94FC760295B3B5F243
-:1027100084974763F935E1A379F1F8E29842A1BBC8
-:1027200008E46D652A7F7EE6846786A11D5F59C136
-:10273000CB639469EB72B0DEF4C779F1F4A505E3DD
-:10274000F97CA75E38DF36C4836161FE3DD297FC19
-:10275000EFD1F73902206F71FF7EA09CC7E102FE26
-:102760001209BF0755E1E7E5E98E964CE483B38291
-:1027700096528CBBCA0E5F1B7E1F31A57CDA245C8F
-:10278000F7E9A06E639C13E86B09C27FCE651F65F5
-:10279000B9482FD5E94B3613BD273EA7B19EAF5B95
-:1027A0002C3D407B2B906EE65C1E2B3F07D1AB018E
-:1027B0000FAFB58DE0780772D15A3E985E8DFC9BC5
-:1027C000ADE914A2E9751BE2A54874BB1AC76531CF
-:1027D000F579F1FE2841192D7F0EFD9E37BFEBA341
-:1027E0003810DC102F8FC337E04FD2F57C3E0A59EA
-:1027F0004EA3FC659ED773F0B7F43E6E071133A964
-:10280000FF8771FE6C0D1FCF363CBF44447B2FF811
-:1028100004F289860CFE9D498CEB239D66E8FCAA98
-:102820002B76BEADE5CAAD6E71F0784D360EC7EBB6
-:10283000357DECADE6C0D01218EC8DACC98CF37DC3
-:102840002CD9A5623CB7B1869F43F92FE9C1271166
-:102850001EA2493D1486F242E6E7DFAF94FCBBC6F8
-:1028600047E95F0DDABA34D8DEA57C36FCC3F351F4
-:1028700006C1A3CBC84763E73FB02E7D9978CDC48E
-:10288000F35772709ECA5A31CE7C98D4B42EDA4F68
-:10289000FFD817FAE919F7B72856ED3C95C8BC6878
-:1028A0007F5CABB3E9F1683B19CC323A07E9484B9E
-:1028B0002E8B8777BA9E7444D0FC5AA0F7A23EF0C4
-:1028C00049D2DF483F018A0998B3D0AF358BF4185D
-:1028D000C16293317E9D519341F8BA09F412F4B369
-:1028E000AB159D39E42FDF2E323CB760000E30125D
-:1028F000DF007E7E383E9B7FF7AB1F1E2AF1518B97
-:102900004988AB5F7D38DEA49D9FCAF79736D8AC67
-:102910003CFF53FB9E859EC7D2602B5ED344F3B32E
-:1029200071FA31ACD3A0BC16639E9C2D9DF40B793B
-:102930000253501E0ECE8331DA092ACDE35BFDF13E
-:1029400005C6F59F3B9DA4FF7C4B8B2F08B33FA58D
-:10295000F54905FCB27A308EE015D05E492D3D2A4E
-:10296000B1B103DF9FC4EF36A13FAB2B3BF87FC76C
-:1029700047C5E3DF9CF434E5851C33F138A8113EEC
-:102980006685C7816416A67CD5068D5FFD3F379CA2
-:10299000204A0080000000001F8B0800000000009B
-:1029A000000BE57D09785445B67FDDBEBD25E924E1
-:1029B0009D104242583AAC4102762721806C4D80EE
-:1029C000880A4C585450841B886C59059D41C73166
-:1029D0001D02880ECE84272A4F511B0444079846B7
-:1029E000D9D4C8B48088CF2D6E336E8F495C5925F9
-:1029F000864171C637FECFEFD4BDA46F13067CCBE2
-:102A0000F79FF73DF8B438B7EADEAA3AE7D4D9EA37
-:102A100054B5D8633BD19825F8CF8FDDF0FF4E49F0
-:102A20005FF61542053C02704088F642ECEE50E439
-:102A3000F052795269C847E5DF7ABB8518807A2D54
-:102A4000B3A89F1049EECC91491E027FF8F1C71F31
-:102A5000F3859882AAEE427CDA5D4BC47BD78BA2C9
-:102A600031564588E4B19A4D73093146A5FFE50911
-:102A7000D1B245093AE8F9687F8C45A4085179C874
-:102A8000160C12BCF055EA84E0858FAA4141708B88
-:102A9000F0AE6944FB80C31DA0F2A1B8FEBF1D4A81
-:102AA000E5678FDABC0EF41BF0BF9345FD96A05F7F
-:102AB000827BAFB1088F539F17FDD727182B3C5946
-:102AC000AD70DFCDC926B85FA8A3A9FDE57BBA9993
-:102AD000EA7DE1CB4CF5B987724CF080862B4CED4A
-:102AE000077E50608207375E6D6A3FE4C824133C5E
-:102AF000ACF90653FB11676799EA4B130A0F2EA630
-:102B0000F91E4C538532488891A2D4D4BE542DB3BB
-:102B10000B0BFDA3CEF66923BD57457F999EEA7442
-:102B20002BF07C668F22DA650A31778DAC37DE9B1D
-:102B300057BF6A790695F383E6E7A5C2DA0AD37B25
-:102B40008B3F99FFD68188FE7AA7145B92A8BCDAE6
-:102B50001B9FF2651C262C06FEA8325DBD61D0E9E4
-:102B60003DD5EB90A4603A2FDCAA04EF253AF6128B
-:102B70003D1F02DD88CE22E8015D657DCB5A351808
-:102B8000A07EBEAB9EF7D6011BC18772D73412FD63
-:102B9000E7D638DC2AD53BD2CCF48CF198E91997EA
-:102BA00065A667BCD74CCFC441667A26F9CDF46CD4
-:102BB00037D64CCFF645667A76986AA667BA66A687
-:102BC00067C63C333D3B5799E9D975B1999E9981C8
-:102BD00005A6FA68FEEDBE62A1A9FEA1B8BD5F6AB6
-:102BE0008487948EAADB414BAF67DD1DA6EF097584
-:102BF0009C7D19E1AB344315AABB950F02F457AE87
-:102C0000EB2A5E5F73880F1E263A9C112B0F6678A5
-:102C1000CEE7878A3DABEC589F3F951F7E0D3EE87F
-:102C2000DBCA07C47789F8CE8FF833E2FCD2A0F371
-:102C300044AB7F9597E4C806AFB61AE5D4DEDF74DF
-:102C4000B192DC1045C5BD8BE2857089E619E0A71D
-:102C50000A91E0BD17A5F3934CF00BFE38D2E97F43
-:102C60007ED1C34A785374BC892879A6D4FF29132E
-:102C7000F35E4BCCA8A2FD849002F9D54934A4435D
-:102C80003EA58B2A05659AF0AE50316E4FE756F996
-:102C900097C184B184E9FD0F4B6CCCBF4BE2FA6F56
-:102CA000015F7E502BF9F2349A0C16E20611B2E164
-:102CB0003B1FC63ED219FD1510C295C1A8ACBB0979
-:102CC000E39F8EF17B85B84934DAF0F19942D8510F
-:102CD000160B0F97B385DF8EF76F16E1E598CC1FC3
-:102CE00053B45DC04785AA754D053E3A3574819C45
-:102CF00015AFB7C3A02F8857435EBF8B7F52BBE38E
-:102D0000DEA2BDF8CE28A7E7D607083FFB2C625EFF
-:102D100088E822C6B5E3710B6B51BF49FDDAFACEE4
-:102D20001296EF2F289A067C07D29DDE8D40725AAC
-:102D3000E81985E67759B227E7DEA4D6F66F782D35
-:102D4000DC9E582FA050FBA777C432BEFA76589766
-:102D50008C79FDD47E3FF4FADFC3B88DF6179BAFB4
-:102D6000DDEE5D701BF5DBAC88AAF53488F774BA2C
-:102D70006438887F68BC196A82B716748B9B71B0FF
-:102D80003DE1A1A283F629F4D2D4EBAF5A0E58D973
-:102D9000D7CEB390C677AAB8311FE325FC7F89FE52
-:102DA000CB9C847F9ADAC9CE5AEF44304591C43F18
-:102DB000FDA35F519BE397E339A0E37F7707ED1411
-:102DC000FAD96769E8E2051DAD0DF94C47B79CD704
-:102DD00049BBC4CB85F05010D7793AF05FE27078E8
-:102DE00055C2678122BFFB79E2CC199534EE9B2D49
-:102DF00045A961D534EEFFE071BB8ABBA663DC3622
-:102E00007DDCCEF63ADE3DD95857171A772DBE4FE6
-:102E1000780AFC4A096ECCC4F3F05380770BB7FBF9
-:102E20005E1FAD398BD4CBCD354A703DD5BFA5E300
-:102E3000F9511BB5C3BA748AE41A1ADFCF862D5B29
-:102E40008776BFD69C3CEE8DC27BD9EA4CD043B08E
-:102E5000BCCFB85B09D6123C4B7899EF4B445197E5
-:102E60001DD42EC3A7A5FA681C7F8EFBFB804C0BDC
-:102E70002FE301EFD177762DE9E0BD17D0D04BE3FA
-:102E8000FF2C921CE87FD278A9776ED6F1364514D4
-:102E9000F13ABD4E5471490BFE6405B59B4AFFC221
-:102EA000FA24B81FC6370DB0AF755D4F170D5CCE55
-:102EB00010EE171BE95BEFD474B8ED766A33C9D214
-:102EC000DCC5AE629DD2BACD64FCF7F311FEBF1D26
-:102ED000F3F6610578BF93E418E8BDBAFD25F1F17A
-:102EE0004445E293D6ED00E081D66D9ECF12B17ECF
-:102EF00046B797FC6775F7FC47EB870463427AAAED
-:102F000010574A51281E3A9D2052689E0DDDD4A0CC
-:102F100023137AFA4EEB0E9A6703D9130ECCDB5FBC
-:102F2000DCF114D58F257D7BAF94AFF1018227F8BA
-:102F300055712FF341E3D2F9F4FCF541544FED5FA5
-:102F4000A911F17904BFE2B3796B890FC79CD50E43
-:102F500024523981E47E985A5F9DB66A34EC83B17D
-:102F60009D488F44E889AB7B98615A089D40A76BC8
-:102F7000747C8FCB36EB9D09D03B46FB36F40EC9F3
-:102F80005715F8BDD1A7EB9FCBC465D03FFBABF77E
-:102F900088CF48BF187A6814CD30947D613D64B500
-:102FA00017CCF631DE3C76AC8F59566A0F7CBBB538
-:102FB0008E1323D6CB4BF90AE3D7438AC742F37F5C
-:102FC000EB901A047EACFEF010E06FE18B0AF3E99F
-:102FD000233EAD02DFFBDAD638077CD330343751DD
-:102FE00050FF9F56D3407AD3FAAD760A3FAD852F76
-:102FF000ABDD0C1FA94EE3F258B587CB13D5595C56
-:10300000FF75B597E1FDBEA25FE07BB3567C63D54B
-:10301000B2D17F15DB478B6AAC02F45A14BF50C2A1
-:1030200036A71B42F8EECE072D7104DF1D54BCD02D
-:103030008BF3770497C34C2BADF7DB5D042FEA9C31
-:103040003CCA85F60F28CCF5730E551DC474BF7E9F
-:10305000EFD3EBC68BD6F9969F5584464B2E7B80DB
-:103060007F39FAFFAA7A108FEB68B59FC7E5AF6F7B
-:103070003AD88EBE77BC7A2CC3FFEE2B5A09BEF528
-:103080008B6FD88E18BFA5C90A3B638C5FF183CEC6
-:10309000C3FD2218247CADB149BDB286F40AE4C058
-:1030A000C87E931EBD5540EE6B0FA29F6B93678F3A
-:1030B00081BD3A615031DBAFD7FF20D87E35F8FFB4
-:1030C00062EBC8231ABECEA0FE4E06247E5A76BC02
-:1030D000CB708B95F04333DEBBA3B454907DD0729C
-:1030E000F61DF99CDAB19DBA53B65B6893ED16EE06
-:1030F000FC75323F57946611A1EF8E131D05E12137
-:10310000CE99F1E8E7849FE35B7F91A645F0D7F184
-:10311000E4D0B71F414EFEBBC5BB9EF954FBEC7912
-:10312000C8D1A56E96335FDB425F3E0C39DB99F464
-:103130002AD757C54D223EABB00B8DF94E687D01A5
-:103140001F8F15338B5CB23F4F6FF91CFCD86BDBC4
-:1031500043DD7EE969ED6F73E8E68F1E061DB67DDF
-:103160009C70198DB78F2A422AE62FE438021B6221
-:10317000B99FB267EE49F613FC94225A54E6F72041
-:10318000F3F3AF6D622AFACD52ACF6C5C9E457DD50
-:10319000B73B03F3EEAD8A2A95D6E5ECDF3C97F119
-:1031A0001CBDF724C92295C6FF82CDFBF51E7CF716
-:1031B000511A3FF5FBE47DE539908725FF32FF3258
-:1031C000E0E18F105A4487DFEDDECEF602F1A477FE
-:1031D00014C9B57EAB5F5A924EED2F5FDB64E948B0
-:1031E000A56F83528BB274CBF6776AA8BF5CB7A584
-:1031F0000AF6EBC73E0F8F2B27B46EBD023DF0C31E
-:10320000131DB12EB3577F53D0515CD8CEF85D97C4
-:103210000F5A8A3D2C17F8FD9DF593DFBD51C08EE6
-:10322000210B06E32DB67B59AFD1B46DC0CF8EEE26
-:10323000EBF0FE2E4B80F5556096B4734E1605FEEE
-:1032400015F32FA7F60182CB7D0D4DB7537D795233
-:103250003711A0F91F092E9A86FA818A70033F154B
-:103260003B1E28EC48F0C9A1C2AB50FFF3769E2E5E
-:10327000647DD8996C757C6F476DEA0DD087D90550
-:103280000354AA2F5243DC9FA894FD55D66F7702B2
-:1032900026D427ABC46749F523F767785AE96369F1
-:1032A000FC4DA695BED79EF429C6BB2633905EE59D
-:1032B0006AD5BF19BEA21F587EB9EF2FC677BEA030
-:1032C00071C13EBB547D69B754CDE7F1A409776065
-:1032D00070EB773B5BC2F3310F5A1DEE007D67A3A5
-:1032E000BB611AB723F8B7DCAFE6CA1900FB8AB096
-:1032F0009E22F57B2DFA754FEE027A5D6AFF0FC5AF
-:10330000FD9DEDB44A4B82D791D76AE74C6D57FBD0
-:103310006223D1EB910E5A1AFAB959B79385D5EBBE
-:1033200081DCBFA3833F3D87ED34D2C316D6BF9D5A
-:103330007322ECE673769BF3D2F4EFEF3AF8BBE33B
-:10334000FD4B6DEFD1E312E7E4F0991C931CAE8DB9
-:10335000B70B1F3DAF5DEDE038863860293B48FE76
-:10336000CA307CC2D2FABD45F1391DA01F6A8568FA
-:10337000135F7B69FD6B84DB30E90D8DE4C0F0B336
-:10338000CDAAC672A2617F621EE4ADF0C77B103782
-:10339000B0082D423F467F87E85580F98D14714271
-:1033A0008BD0B37E9164C7BA15AEE44B9C77F80915
-:1033B000B3FED9F744E4BC87B67C1007138CF0D178
-:1033C00001E585E6F5A23EAF3F605E543E9F5F3467
-:1033D0002587BE3FEC2F6E2BE637CC3AB18BAF1B67
-:1033E0008FFB068C7BF85F2CE671FF106B822F75CC
-:1033F000FCB729E4D8818FBFB107B1FEEA612BD0B9
-:103400003CEAE76707B1DE77D945C009BF67929DFF
-:10341000EDE0FAF8403CE46ABDE20E21FEF482AD34
-:10342000619AF48B847BA30FFCFBE623E0FF1B5A1D
-:10343000EC0AE2591D1DE24BD857424D141B532292
-:10344000BEDFDECD710E157A2397E0C1FAF36976FF
-:103450007E5E6B13AC2703D362795CAB93AA5EEB01
-:1034600047F5AB6B32BC3472F18108AEE886FA3BAB
-:103470005596E7432CEB373E08BF67621AEB99D5A8
-:1034800049E18C4AB49F7F993740FCB0EBEF2AEBBF
-:103490008FD53E7F7AB20B7290E43CD179F5447FB0
-:1034A0007A6C0ACA540BE6DB91E43C3FCFA4765415
-:1034B0007E6493ED3ED4E946984E87BC7DB8A4A7C0
-:1034C00080FC599753703FE8840A27F1F3B59204C2
-:1034D00062DACD0F88DBD14E53836A26F0F29BFB74
-:1034E0007A117CC32CD58D38DDB5F3629A94FE54E5
-:1034F0006A6AD891402F4C19E38FF4D7D7E5F8EFDB
-:10350000079DCB437DBA7F1EC1C7D36EEEF973C84A
-:10351000874FC98F86DFBD2C557B84D7E91E1FB727
-:10352000DB43C6CD8FD0134E4F7FB6B74B0C3F3326
-:103530003C1BF8DDDBEC643BF642FC2084D77919B8
-:103540007DFF418B08819FBBEA7ABD160100D0390F
-:1035500014C37C307692D3CFF12A97653DECE8C74F
-:10356000895ED06F819D0EA617094AA6DF837B3B3B
-:10357000B35E9AA9CBB1DAA9B1FC5EED765BD0025D
-:103580003A2BC1A736E1BD1763587F96D905FB2BAF
-:1035900065CFF7653ED865F7672E43BF7B1D526F39
-:1035A000277812B9FEDFDA09D4BFA0EBEBB2D870EE
-:1035B000AF24A253E7F65A3DE8417C57C5CFEDF260
-:1035C000F9E160C13AAC4B41F64DDC7082857F1D5C
-:1035D000E45580ECA08D5E493F8C4BABEDBC1EE307
-:1035E000D5681CA0B3B843E5F91CA6B58CF91DAE8F
-:1035F000EACCE352268D4DBF99EA3F5B18C771D7DD
-:10360000C34507CFC00E389CA6F2BA270975DF4024
-:10361000AA279DDB702FC195F33F7D73203DADA898
-:10362000FDB0CB1E4F2BDEA72F291F27880FA62FFB
-:10363000B8738248B8F07A9D5EE6804FD9BABE85ED
-:103640001DCE9D8449AE1FCBF17F8879DB73B54FCA
-:10365000C00F95D9646F131F7D6D6F780C7195CF76
-:103660003CDA9FF1FCD4735F6DC273616DEEC5FCF3
-:10367000E16C2C445CA6CC22E34A0FE56A5FE03B98
-:1036800096C604A65F65C8C1F48BCB6E9072F1CE6E
-:103690004BD307C7EA37EE52A89FD2D8FA0A2ED5E5
-:1036A000607FE8ABE34A3841E9CEF8D5B0AE4EB81A
-:1036B000C309A08F6691F65EE9E6E879D25053110E
-:1036C000771342FAA921FB101AD70212BD0FBBF1E2
-:1036D000DCDEDA3EB3958EF41DA6A3707D32E3974F
-:1036E00068FF549F9C7B09EFA5497B7E3324F37CC4
-:1036F000FC45C3C67CCE1F8FBE4E8AC2095827C761
-:1037000015B94E4E0829BF029B63F478811CC7D7B8
-:10371000CF75E071A4EAEBE86B456FF79443B623ED
-:10372000DE833D53FA7BC9770FDABCAC3703A44F75
-:10373000202F4BDB49B8D491E686BDD5510D586298
-:10374000C197D582D70B8D8DD7E5F16D19FCBE21C0
-:10375000D7449110906BA5DBD2D74BBB4EF79B3172
-:10376000016ABFE077B23FC090FFC79ECED0FB9703
-:10377000EB299AAED178C8CE9571AEDAF8FC0EFF7F
-:1037800028BE9995F6F15A88A0076D725D07E2A5EB
-:103790001E21BB256D623FEC4FD84DDFFD3ADE3E6A
-:1037A000D3EFC23E85F9B9F1BD41B9D2EFEC1A456C
-:1037B000F78E6AF34BB097C41382E544F43846E0C1
-:1037C0003DA2DBD34F9FA3B32AE94E8C64F09787C9
-:1037D000F1276CA0CF8776838EB766905C2F05AEFD
-:1037E000BAB5E271974FCB801EF91A30E17B5712C0
-:1037F000C1D9B0B7A4FE3060831ED17CBAE4C3390E
-:10380000198D904FB9D23FA88D49E82F12517609F2
-:10381000420ED4105E514F7A70665136FCE1B1F71A
-:103820007F6E6B9DCF97D57E3FA9A073F09C353EF0
-:1038300027D6E7DCB53EE7AC087AD46ECE3DE4216E
-:10384000BC9FD86C456452D45A83BFB92205CFD5EA
-:10385000504070BD13F83EE1DAF726DACD599B945B
-:10386000A346C8A7B96BC6F84B22E8D077B3992E08
-:10387000FD4266F8F23D66F8E7A4DB31BF9FFA9E91
-:103880002F6C86730F99E1DD839AD51FA19F5C96FB
-:10389000A05341D9A2FE08F91E5483F033BADE5971
-:1038A00034793CC147D6CEF682CC73DF5F920FFAF3
-:1038B0009DDC79F7AE727AEF48B2C50BFFEAB80823
-:1038C000FD713CD1634EFD2ABBD583F99AF97C97F3
-:1038D00045E7DBA7651C707ED05C7FBE7CA8D1E38A
-:1038E0004E222B92AFA2E94FFD5EE7A781952D9E58
-:1038F0007C3FEC9F79E388E1697C8343ABECC27544
-:1039000029FD0418AFD604114EA3F135DD1DCFF10A
-:10391000972B168F129FD1F7CAADEEFC5FD23C6792
-:10392000391577C0DD1A576FDA9E5E017DBAD16D09
-:10393000F1928F23DC83AA0E66E4C19F1021B71792
-:1039400071FDBB96C3EF9F5795C0F8992F821C97C6
-:103950009FB5D4D12A1FE9BF929551E3591D514F0C
-:10396000F398B7D6DC7EC1861F1D91B0E1975E51FA
-:10397000BF4EC57C6FD6C7AD0626B05EBE428F5720
-:103980007C8EA6A46FB6762FDA9D8BF6AB47CA7AEB
-:10399000AB53D7B37EF6F3CA5D760FCB33EBDBCBFD
-:1039A000797F87D621F4C3A1F8393F87BC3BED145A
-:1039B0006E870FED3586BF6C27FD42DEB7A0F6A7F8
-:1039C000D72AACD7CBDB49B8FC09258818703982D7
-:1039D000B6809F9471DA321D1FE0137FC47C40AF24
-:1039E0004858D419F1F130FBBF1555C20B3B4010BC
-:1039F0001DFD06DE783F2A6C3F023D1B50420FFB47
-:103A000060EF99BF53B9E74747247C2EBE4CA4AB67
-:103A1000E1EF07198FAA5DF821C7D5BB62D96E27E0
-:103A200005100BFD6ED3ED6BB122D81EFA6A35F48A
-:103A30001595CB743B3CB04AEAABD549FE5E6ED4DB
-:103A4000AF4AF7020F3728BA7F0BBB3E09F6F53EA7
-:103A5000EEB75971BBD727A1BD08C4A4B07D2DFD19
-:103A600084BFABACEF9AC97E5F0F7BDD170A633C66
-:103A7000AB1FC8647BFD0543EFDD1723EDF9F3EDC4
-:103A80006EB6AFC4FDD27EFC4808E9F7F6D0BE039F
-:103A9000DD67AB45BC1955B2C49F8EEF964CB25B47
-:103AA000400F31EFD2F645365A65FFCD345FC4EB97
-:103AB0003F578A0E5A22EC60679ED40FF905FE4DDF
-:103AC0007A3B2FDA9558DE663C9458841BFEFCC680
-:103AD000B3AAB012BCB1CE115C42AF9474F3F75AE2
-:103AE000988DF7647CEAB04FCAFBB83CE10F52995D
-:103AF0009427F555529EC5548AD132CEF2798CE482
-:103B0000C3E9A2A890F7073C52DE47CFA3B3FE9DBE
-:103B1000127B83793C9FEC67BA90CE732F017F8F25
-:103B20009676C7E7B728ACCF693EBDDC04E7FF4B0C
-:103B30000CC7173FD7F591815FE29F0188A31972E7
-:103B40002B49E797D5F7049F8A217CAFB211DF801C
-:103B50006EC4371BF398EE6C17AE9E96CA74BF41C5
-:103B6000A7ABB82F9EE936C4629178BE2F9DF14C69
-:103B7000EDC55FF1DE188FB4E72FD10F23BA0FC860
-:103B80001B70BE3F66D05B588303FED1FE4DF9EE3D
-:103B9000ADBB02C4FF0B7EFF4082A07647AD75A986
-:103BA0005E7ABF6CE3B2043F9547AC810437F57F82
-:103BB00034A88E0DB681EF453A3F60FF4049C5BE3F
-:103BC000AB94E3C79EFEDBF23B689CDF2AA219F2AE
-:103BD000B162C7F7CBEFA0F91DF43B9B214F8F5883
-:103BE0001B0B2177E717BBAA6ABC58BFE638FE82D9
-:103BF000271F48F530BE031996345EFF1978AF626F
-:103C000083CD0BBFAEE23DD5EBC1BA17CDCB31BEF4
-:103C1000E8F72B439FD9817FB74534771AD246BD49
-:103C20006864395FB9E3D7DFA809288F7E04FFA253
-:103C3000326AFF609EBEBF12BD8F303BCF9CC74033
-:103C4000F8E13C86008DAB27B38B8C3BD73EF5501B
-:103C5000FF26D80D1B5E4B50B25BF70F8C7D9796FD
-:103C6000D0ECC79FF75C785D7EADC78D5BE926E53C
-:103C700098670F0DAC83408081CB325B3801F67EB4
-:103C8000D93A1BCB91B2AD4F6C7A18FCF6A1C3DBCD
-:103C9000D303F8B41DF2A04CF1372B2CDF458292F0
-:103CA000DF4AAFD2AD5F143E02FB3A5D15E3885E9A
-:103CB0000B9E3D23DBFB45730CB52FDDDE5408FF67
-:103CC000A04C735539DBA0D7A8D04BF646571BF450
-:103CD0000A3515729CEAA9EF981E47F72AA243E617
-:103CE000F9EFCF5BF7855D48FFA0B95D92C417F48B
-:103CF0005D65482DB6279EDF9EBE3FE1F93CAE775D
-:103D0000C35FB9181D4701178813EC8E1749D0DB24
-:103D10001F3982E340DF6D8B1204F1FF57D62AC9A9
-:103D2000F78F2E4B859D37CF16487573299FCF7B14
-:103D3000EC36E6C7B94A55AA3B9BF93DDD3288E728
-:103D40009B8E79DEBCF65A9EE71CA1313FCE7B5498
-:103D50002D0A5279C62AC66E6F63DD9CD4E5944362
-:103D6000DCD21FEBE40C7D097AFC2BDDAF0FBC230A
-:103D7000FD6987989418B99FB457978B01113C0C33
-:103D80003D50D960E33885FAF699427CE7D64C6B12
-:103D900015F23D68FE011D5FCA8FD27FF120EFA1B1
-:103DA00012FF227D3AEAED311D1AB3F1FD16FB4DEB
-:103DB000D4EF5FE0277A4DEF31DEBE5AEF88552E03
-:103DC000A73255DAEFD1F3E8344031ECB877440448
-:103DD0003F556EFE8AF949A4A922314DC2D8BF7061
-:103DE000CF72552512DEFEF2DE6776C4BF032916B8
-:103DF000D113E36DF88261E16DEF417BE3FB957BCD
-:103E00001C221CB96E377C11B5AECDF54254313E43
-:103E10002B45A207FAFB2B7B73E10BE887FADD4801
-:103E2000FDCC21FB2B6CB2AF9A0B1F813CD9637781
-:103E300073FC81ECCF7004DF9CDB1FD5F705E7EA4C
-:103E4000F2201A0FD1F2E1AB28F960BC2FD6B6BD33
-:103E50001FD52A17022C4FCB6C22003BA3EC430743
-:103E6000EB8FB2AD723D0A92A73D697D1CDFB2FFB8
-:103E70008F37C09F0DD952C671AF66F93BEF992FAE
-:103E8000785EB309FF315EC8DFEFECF07FD346897F
-:103E90006607F68B57FAECE0FBF3D6313D6F731DE6
-:103EA000AF5458BEFD57E52EE1DB0E7BEB62EB75A0
-:103EB000EE05E46EF20073DED019919D380495EEA4
-:103EC000E2AEBC7F10855F03AFD172F4E93C4F9B3B
-:103ED0007294FEFC5144E0518846E6E36F492E623D
-:103EE0001FAE62C3F7ACD708ADCD0EE2E38AE03770
-:103EF0000C2F835E63F8A52988579E3F6F333EA33E
-:103F0000EBDF03EFD3D08B9EB3B15D50562FF31C84
-:103F1000E93DF63B2A11AFE7D67507335222E1603F
-:103F2000141C8A6AEF8F828BA2DA6B517095A97D7F
-:103F3000D99EFDEC67D1B84DED1C8BAF613FE47CA1
-:103F4000BB22C878ADDCF18D3D00FEE8D46C875C07
-:103F5000B42D1181787ABFF94595EDDE539EE604C4
-:103F6000D829CB62A41D77CAADC349062C6616D3E7
-:103F7000384E05FABB9157D01C23E32DA78A9A131C
-:103F80009222FCF6A67A35C143ED1B83626CDB7985
-:103F900031B58CD74671A17A69CF8D517FD826F380
-:103FA00045ADC241FD35D67CB70DF1A4CFC97F82A6
-:103FB000FD5252737D02F65F4ED577FFD954F881DA
-:103FC000AFAA9CF325027E3BF226664B528A23223F
-:103FD000F0E0509A9F1A9F77F005F857C428D8FF51
-:103FE0002C591965DF88A2C430FCE9D5D1F90D41FF
-:103FF0003BEC9BB9A467218FE6AD35D72FA83FCE08
-:10400000EB6541D47AD1F4B871F47A596CAC179F4E
-:10401000F0E9F9969CD777EA90CAFCD5B2D42696F7
-:10402000A7C8BC5AE4A3B4D4CB7C9D963D1216011C
-:104030003D0F485FB706DE4E603DF5BEB0DD7262F3
-:10404000E7BFE7FF12FCB3EBE3FE8F507962D7873F
-:10405000BD5E00BCFB4F5D3E16E7B71FB5F7FB1911
-:104060003CAEBD0E81719DDAFB4A17D81BA79E7727
-:10407000703EC2A9250EB6D7037BE3396E71AAB391
-:10408000B4876B5FFCAE7F23EBE3A54CC72706D854
-:10409000A55D55FF37D68F2DF50E0FE651B9378E3A
-:1040A000D755E5F331BCAF76EAC5EFF223E371FFF4
-:1040B000D5F918FBF0A7E2C5D467C0BFBAFD5FF918
-:1040C000C2E0276AE02FEF78C93E1B79257FF88F81
-:1040D000FE90AFA79E7989E5EFD7B6C6C710DBDCA7
-:1040E000B6F3C0C3B674C4F5E8631D85B87297F51E
-:1040F00046AC9FF3F122F1708AF08079115EE6C13F
-:104100002EBF103E5EFEA7C5C73733A49C1B28B048
-:10411000EFD38A17C52F9FC773BC8AE62F9FEFFD89
-:10412000AE3FE4D0C5E6FB19E6DBFEFFCE7C95FC96
-:104130007FD6F94A7EBF678087C719CDF7E7F3F5C9
-:10414000EE9F33BC2DDECBE3BDC4F59E99FF7F8B84
-:10415000BF47FCD3CEF762F47E55A777BC1BFBA00C
-:10416000A75EFC8F2EE227CC7BC6FF523E37ECF9D0
-:1041700002D57BC847ED5F13A1F7BC996C95B46974
-:104180008FFC3ADF88A7487F6A14FEE541FB9CA5B7
-:1041900021AC07B227E0C7D4BA720EBC4DF02B6435
-:1041A00027A8BC2F2BE349AFA4F98232BE5B2510B0
-:1041B000CF2AF8D36C865FF75D7900792585AA8CC4
-:1041C000C7ECAFF16E68A079EC4FB2786A091EDDDA
-:1041D00069F6E7DBA9DEDD5175C33FABED94EBF487
-:1041E000448C6FB4CBEC675D13E5275DE531D78F69
-:1041F00015CFA460BF6E6CB64DE07C4E21DA47F857
-:1042000095F3F3DD3CCFAB44DD52B7EBA7E3E939DF
-:104210003DAF92F0C2FB36814EAA9E1767C69B0047
-:10422000DE5280975CB6DF03C27BE06D82ADBA7D63
-:1042300025F4FDC74267FC26F8D10E51100E127C02
-:10424000C663AD427BAB207F58CE93FDE868BC09C6
-:10425000DDAFB6EA2418DD69541878C6F3AE69A656
-:10426000F779DED178FEE978DDD76911F09A16EF9B
-:104270000D822F3A3D9B82386B2DE159515AF169DD
-:10428000E0291AEFBFA1B14A7F5DE2BB93D567C5B4
-:104290003A1BA6DBF3A3AD4912EED4A016F1FA0B3C
-:1042A0004ABEFE8BD70A7B64A42B89F349857ECE58
-:1042B00042D5F7C39161C7E320FF1479B913ADDA92
-:1042C000ABF99C8FEF1605F05B0B4408F15BA5FE84
-:1042D00095EFE11FE17C4911EF6B1EFC00706FA7A9
-:1042E0002B0C7F50ACB59E38672723EE1F75BE623E
-:1042F000C2A0ED2341AF598BE919E2586ECF41AC12
-:10430000C7E2FB1D1ED0AF93B581EBC9D772D70CA6
-:10431000C66E7588E1D812B2F4D3D1EE9591DC7EE9
-:1043200091702B4948B70B29805D6E99AF46CEEB53
-:10433000B780ED4BE33DB5326E22C04F3D5076C3A2
-:10434000F765FBB4D1F43DE4BB098DEDE5D81E1C47
-:104350000912DD9422DE7FEFDA5DE645342F73B07B
-:10436000BF537C77E75E904BE30ACC71EBA103650A
-:104370003CC7289F1A28E5886AF1A6E13BB396F668
-:1043800061FF4B8D2D2ADF093C6E8B633E2F5E7ED5
-:10439000D3F801F4FDE26DEDBC18E6B109DBF3657D
-:1043A000FB69B7BD4FCFB5CD31FCFCF581DAF7F92C
-:1043B000C833503C3376D28359D7EEB7A751175A3A
-:1043C00068E249C41D2704B6BF897DCE0953546EE7
-:1043D0003F41CFFF144BE378DF7C7CE01B6B1A7D01
-:1043E0006F3C3935A86F8A7177B985C65FACC79BBA
-:1043F0006D03E53A546385F68C0BE3EADCAB1B3DB9
-:104400001F2F643E74F4BA1DA9B7EF3ACAEB4901F5
-:104410007E9418F7FABCD6F6F80EBE7BA58E0FF781
-:1044200040B9EF6BC084578E8B97AC7034754F409A
-:10443000690BF7A6B27A7041CA40AA1FD74D14AED5
-:10444000C1776F57C57A1E6F7331C7D9E3B33CA0EC
-:104450008326EA38DF48ACEEC9FB394D2305F34F1C
-:10446000D3AA4C83DE9C9F64F8734D23BD0791BF94
-:10447000D53CD2E95DEF457E4B288C38CAE13572D8
-:10448000BFA66B6DB807E46CB34FEE837CB138D731
-:10449000033EB9F981C909909FB357AB6107F87D15
-:1044A000A5396F49B8BD9C373EBB6EA41DFE6B8914
-:1044B000CB6FC7BCAE1AA4790742FEEBE7222FC32D
-:1044C0009870EEA7AEF875F87D6A02AD67AC3FABA9
-:1044D00027017E7574DE53A59EDF64C0CB52B5C143
-:1044E000F8DEAC44CF363E5FB9B83BC7556F1F28E6
-:1044F000E5AFB0867B003F8FD15AC0FA3C912FF9CF
-:104500006F5CB2BB978BF93746605E4D36772FF004
-:1045100073D3B2180BF0346E89E4E37BAC727D0583
-:10452000FD1E4B80DE8FD1F9777A8DB5681DF5D3EE
-:10453000C929ACF1C9C85BD3DC18C7F840CD61F814
-:10454000D7B3757D357BA53C3FD67594A4ABB0360B
-:104550008C6E47CF8F6CCCCC415EBCC137F5830BE2
-:104560008A0646D07F5C81BFB03D7D679CC5D30283
-:10457000395C324579A9BBE4836B07B23F5FCFEB6F
-:10458000BC85E4842309E7061B248C7C55C88DBABE
-:1045900087FCCE08BFDD2E7670BDBD44E6A376B5A0
-:1045A000876B38FFEA16E15E42F026B223AC362173
-:1045B00036573BB97CBA9AE45D4F21B654A731BC5B
-:1045C000ADDAC365A83A8B9F3F53ED657847F52078
-:1045D000867755FB19DE533D96CBE7AB8BF879B464
-:1045E000FC99ED9AC3F2C4DD8B683DF87CBE99E17D
-:1045F000A17141FE3885FB6EE4D30A29EF92B2A483
-:10460000FC11BA3CEAD647F0F99BDB410FC2BB6D07
-:10461000C5480B9FF7B436A683EFC6A827B6EE466B
-:10462000BC639E8BF3B25A4423AF931661F106F23A
-:10463000A4FC7110DF75BD6B6C66649EFA8DF3147B
-:10464000618DE0AF9BAA628435423FCD5C9C648261
-:10465000A72F7EF7E50EF4FD3EDDB47B41FFC37767
-:104660007DF9E89FE8F9E3771DEB29CFF5FEB02E41
-:1046700032EED2229A256C75F27EFCE377A4A7B6BF
-:10468000EB26BF077ACDC23F3CA04FF3D127B10E36
-:1046900097A9DE25047F04FA103E3FD1E953BCAC54
-:1046A000FBF25F605DFB9D5E85BE73F88EBE858309
-:1046B000A8FDE3FA7E945841788DD43369527F7D0A
-:1046C0000AFD9524F55901E46858EAAD4F7F951A23
-:1046D000B81BF5B724787102425BD1213097E09581
-:1046E0003EBB57455CAF5E2C47DC86702CED8A8064
-:1046F000CDACC71A3B25211E6C9C938ECB0B3AF98F
-:104700009C167584FD985959FB443AE4529DE2C6C3
-:104710007E0DCE753A9321DF14DE1F451ED014D2D4
-:1047200097CF0E54797D9DCAB772790D92E508AF87
-:1047300031C2CBF1999295D41EF2B1CE679F13216D
-:104740007F67E9CF676759B8349EEFD3BFD77185CC
-:104750006F2AF8A323EAB351E64CC5F83ABA0AAD7A
-:104760004AC4FE6FFD402BF7772A5FF67B0D884A1F
-:10477000EFDF9BD5CD7E73369FCF62BD65F4332BC3
-:104780002B677937E8EB9523811D516BF3A6A55074
-:10479000BB97075AF579E8E7C29D323FBBEC027A36
-:1047A000C388D31DC13FE539499EEF826DBFDB86CB
-:1047B00073120B3E76B0FE5A70B9D44B223B983F31
-:1047C00099039AE6B8F8E8DF9D3C78378DE724CE68
-:1047D0003121DEBFE3333BF24369D95425A60356AA
-:1047E0009B90671A1D9F3DB0EDE38436E3E23BD416
-:1047F0004B8B8B2B3F24402F18F319F3E29954D89D
-:104800005995CA59DE67AA7C9124751BF38E8E8B4D
-:104810009F8B9F8B95DFA88833DF79A4CDF87974BF
-:104820001CF0FB81D1FB11AE02C8893387D420F67E
-:10483000D35B823D13451BFD1BF1F3CA35F4523B9C
-:10484000AC4B4F22F6C34E5DC02E1F3E48FA2F27B9
-:10485000F578FBA92D2AFB4BA7B6C407619F566CC0
-:10486000B9FF20F6292B36286C9E978B06C617E1D8
-:10487000513823F518F2DDDAC1B8F624425E19E3A7
-:104880002BFD5D7C15F86A7E48F16FA471B4383D4C
-:1048900089ED23C6D17190E4CF5247289FF1AA8FAA
-:1048A000DB3D48CA41A3DDFCFAFB392E4DEDBE6667
-:1048B0007BE7F77182F30445F39B18DFF1B5B95E2E
-:1048C000EC2BCE0F6DAFE0FC8E2D716EC4218EE906
-:1048D00079CEC6777AE9FDF51A24ED94E3FAFEDD88
-:1048E000F16DF27C3AC689F5744C31E70B66EBEF5B
-:1048F00065EBF87A475FC746FBF9A1A6841ED4FE94
-:10490000AB3DEF72993F48AE97F9AE86FED0BB5FE4
-:10491000ED88E3FDF8AF763C528838F3C9D0C8146F
-:10492000F0FF397F6D904DD261AD3A16F812419982
-:1049300067530EBCE6468EB3DDBA4066E43A93F99F
-:1049400046C7773C9B60C96EA563B9B3CA89F3A11A
-:10495000953B6E29021F1FB4497CDA774C0CE0D8D6
-:104960007365BD4F807F799DA573FB159688760E84
-:104970009B97ED62DB9E623FDA1B71E8853B6D7CA5
-:10498000BE70C6E59EEB6FC43A7CCDC67458D8C7DE
-:10499000733DE72335A89CBFBC305384617F2CBA9C
-:1049A0003D7E1DF6C38CF1CEC895EBBD6C8522FC17
-:1049B00034AFB2A02A342A3B12DD03C8514A6B1C23
-:1049C00080FCC9A6CCE03DBD52F8BC6F787D4A6B37
-:1049D0009E29ADE35E3817593E2899E7FDE0B442C1
-:1049E000D67787ED2200B9107846E6E1947593F901
-:1049F000D10F83EFD15F72B8573B9AEF099DAE6537
-:104A000093C2BD909751F64C3AE7659CB0CBFD52EE
-:104A10003CC77E71590EBD4FED52F47C5EBC9F14B5
-:104A2000C14765B3BC1EB45393BD1E9F0BE3757F96
-:104A3000CD76EBCE7801BBD5B23B5ECFAF8AE13C01
-:104A400072E3BD9A41D22E4ED1E9296E90F9980FAA
-:104A5000DA64BEEA831BD3F97E0CA3FD83366D1A9C
-:104A6000EC27CC03F6FA7C7B5D2FECBB18E39D9F13
-:104A700050C7E33CA1F3F9FCD83A9917AE9F3B46E7
-:104A80007BC04D7A1E7BF3530ECE5F3996DEF02D40
-:104A9000C67BECA93EC88101BEE7ECE17AB21F8972
-:104AA0009E0B9E7684517FF42919B73E6A0B7E0BCC
-:104AB000397CF4D1767C3EEA68FB603EE707286EDD
-:104AC0000BECB3A38A0EDBDC6C5776B5134CED53BD
-:104AD000628505F93B6327AD9981FC86960D0EB082
-:104AE000A738B6E9A154F66B842791F36C0EA9029E
-:104AF000743BF6F4DFFA44DA2F46B9608339EFAE3F
-:104B00002953DA9546FD3A7D5DAED3D7F5C64152BD
-:104B10004F95C7851EECC6F393F826FAB07F470A77
-:104B20003E9EF327B6F65420371E16C19F7F9CC7C2
-:104B30005EB60779F365CF3CF526F66B8F594403D3
-:104B4000EC0FE5AECD3FC7FD1C29BF49643D24C431
-:104B5000069EDF51B73CD74A0B96E73FBF838417C9
-:104B60004CDEDC0BF041D2390AADAF051685FB5F98
-:104B7000B0AB1FE7DB113D2CBC4FB65DD5C743364C
-:104B800025F0B749E62B8F4B0E6E82BDD7FC6877B8
-:104B900081F3EE63D4B5FD41BFD31BE22CE0A7F255
-:104BA000BB87240E01DEDE5205EC8FD3566F87C81B
-:104BB000384234BEA2F3C0BFD5E55319AD3B9CFFCC
-:104BC0002CDDF528DF2F520ABE045E9E56781FBBEF
-:104BD00074F99087984FDFB4899ED4EF89D0FD098E
-:104BE00091F469D4E5E2B9EFD8BDDCBE94DACBF735
-:104BF0005F4BE0716EB2715E4B345D2FF9FDA7D54E
-:104C00004B7AFFDCFC436417F43F1F0FA745C3CF6B
-:104C10003FA6EFFF654B0CFB83E401F039B6E3B62A
-:104C2000D01CCCFBF8D618965FC793A49CF88AE4F6
-:104C300069A037C671CD6F994FDF99CCE7FDE606C5
-:104C4000CDDF35FAFD02721C7CD7CE9B08BFB3FCCA
-:104C50002D290F895E3FE3F7DFB2F1FBD1F338A0D6
-:104C6000BF776E9D6E8D63BE38DE51D2E3F8B6DE3F
-:104C7000AC9F9A92DC82F9E6299BACB785BAC00E4C
-:104C80003EBEB5B7AF36E2BBC793425DDC11CF9BEA
-:104C90006CC1E503A53C6D865F2CC2246AF3915F6D
-:104CA0002458CE1BEF953A5736C04E417E6F7E0E8C
-:104CB000976147F2F979BAE392A53F396CB08C0F4E
-:104CC00070CE6AAA9E4FCE764FC80E39AEE9F66115
-:104CD000D996E83C5F59DFC9789FD65D8A91576CB9
-:104CE000C17843F6348E3708CF3334DED2A5B7CC43
-:104CF00047FE7869D5AA1B613F955AC5583B8DABD5
-:104D00004951791C4D3162E624D89191FD44D86F08
-:104D1000BD079F8BD30A772ADBAD6CDCF71D2CF522
-:104D20001DE03AFA5ED9526525BE6FC8170E14A66B
-:104D3000B6E20979ADC8EF691AA9D75F60DE4D36D2
-:104D4000591F3D6F633C23064B39D594E9F9ED506B
-:104D5000D0E50D95CF779DFE213731B90D3BAD558F
-:104D6000DFDB5BF36C69FCE3605BD377DC83A5BCC2
-:104D70002BA5F1619CBDD69AF3CAB33698E1CBB6A8
-:104D800098E1EC1D66B87FBD19F61E30C3797ABF75
-:104D9000F0B3716E197E364AF8D91E87F4B301C399
-:104DA000CF46093F1BCFE16703869F0D187E366013
-:104DB00003DFF0B701C3DF46FDAF743C097F381550
-:104DC000F99A151699E74BF4F0F339A66976D3B939
-:104DD00094532FCA7329C40F52DECF77F13A791852
-:104DE0002D06432FC9F594F2BC23B884DE1BE1D114
-:104DF000E60EC67A5DF3CD1CF05D45B746CE7B6D01
-:104E00005AF64AAFFBA95DA3122F605754ACF9665E
-:104E100006ECA8248F568EF695B10DCB0772DC3EBA
-:104E2000CCF2A3B1C6F3D60849478EBF14ABB8295C
-:104E300083EAE725B7993F149D772E569AF3CC2F36
-:104E400096771ECD07861DF8B8AD39DDCD7EFAD038
-:104E5000C710E75DA8C4BBE1A77F162396E0FEA0BC
-:104E6000C0AB324FADE5904DE60DAC54D68B08FB90
-:104E7000E4D73ABE0D78F6D95CB6C7CFC12B158BF7
-:104E8000B85C881E5A7313FCEBD3F32C6C779F9E8F
-:104E90005750D81EF61FF9655813B89F2B72BCB82F
-:104EA0009F2B927F703F97F9DC4447537BDCCF65A3
-:104EB0003E377199A97EF2CA5C537D49D110537D6A
-:104EC0000F21C7B768BE1C5F09E9077F3BC04B389D
-:104ED0006F71116847764A1725B09CE5F23A85CF85
-:104EE0008D7B16AF28045E4E103B238E60F0CD6C98
-:104EF0005DBF086BC00EBE3B9322EB8F2A0D5FDEB9
-:104F00004DEF9DF4D56DC2D529272D6B1F1CEA41AD
-:104F10007EFDBA2E6E5A87B72AA154889E3579DA5B
-:104F2000AEC1ED919FD23891F713B7B74FAE81DD87
-:104F30007968C09B83D0DF1695F3260C7EE96293D7
-:104F400071BA75838866644FACAB93F9BCEBEADA4F
-:104F5000C5F688D87F31E6D9023A08944B525338C7
-:104F60002E241A300FB2DB97C06E3B7D48DAEDC6B7
-:104F70007C7A2C0D775A44F5B76E8F61FC7CAEFBC2
-:104F80000D27FABCD4DF83F31BD57BBAA8B0072C5E
-:104F90005B36C18F70A4686F82EFE7ADEBF927DC59
-:104FA000EFB5E07D55E03CCD17AB47250CA6EF1CD7
-:104FB000DB6AF38E23F8EEBA27ECF093175883766A
-:104FC000CEC37C6A9D1D79C9576E5EC7CFE76C2E34
-:104FD000E6BCCBB9A28AFDC823FAB92C63DEF30A7A
-:104FE00094B56EE22FEF15920FE7C5CAFD3CE2E7DC
-:104FF0009731AFD39B151FECC72945DBEDC5D0CF4B
-:105000003ABF7AA64E1D03FE6B09C9FB395A5E579B
-:10501000E5BD63535499177381FB7C269FCD64FED5
-:105020009E72B62FFB59D786FB483F365BCA8F96D8
-:105030007A95F7E35A5EDF9F3219DFABB7F1EEDD09
-:105040003C7B833CFF6F11553847E099DA20F92A01
-:105050005354C1FE5BF4C6BB07B1EE16653A3D582A
-:105060000F454355137F568E8E33F1EF54916C3AB2
-:1050700047731D924A22E029E3BA9BDA5F3FA56F8E
-:10508000943CC869AD67797045D439C002135C4E51
-:10509000E59D904FE26AD37BE562526B3BF8C31B00
-:1050A000A4DD5ABE23693DF6C5E759A43F345593A4
-:1050B000CF2BF6C8E742C49E3B978EF3F8880F9833
-:1050C000CE6DEBFB7CE897E381DD1B38AED39C4EC5
-:1050D000F292305A9ED568473C8DCCE566C449CBE8
-:1050E0000304A35FBF68AEC5F911ABC4AFCBEBEE51
-:1050F000B624BD952F2A7698F3AD2A0EBDCBED8C44
-:105100007CC6E87AB2D39777C4B8C7293E3E37B990
-:10511000A5C98E78D014AD13DF4B117D5F5A59A805
-:1051200089C779ED9E5437F66D2BA2EE495B7885E1
-:1051300047EA273DFE8F7B86A49DD06097715BD7A1
-:105140003E0BAF3F792FCF39BE9C6791F70544E105
-:10515000659CEF7DEEAF63BACC43035EAC117889FA
-:10516000E623E0C91A81A73942E2690E499320C1BA
-:105170001DC16791F8F989F89A8B7F50FDDC3D4A93
-:1051800010F96FD1F899A33532FEE668AEAAA0FBFC
-:10519000FCF954DCF9C141C8A76DE9F25EC368FCB3
-:1051A000CD150DCBE1F7CE25BD114E62BEB03BD97A
-:1051B0004F53BCD0DB9E418D769B94671CE76D7985
-:1051C000FD5D5E772D5E5AD5E00B41F5D4DEE5F747
-:1051D000342F6923CF77D259193FB9EEAC95CB293B
-:1051E000E3CCEBEEDAB3A9FCFCA7E2A50278069FBC
-:1051F00023AE97D0C63D7B88F3259C3F5F633FC4B9
-:1052000090C3AD769D396FF942F65F749CF0AE2B7A
-:10521000F47CC1016280296FF902764774DEB2A185
-:10522000C75B5C524F8E51B3DFF2D0BC8B5F55D958
-:105230004FF74C1D6BE1F3E3AFCAFBF1B465679A1E
-:10524000C09F5ABC85E5E0C2F86E7CAF85A6C7ED6D
-:105250008C7EBAD4B44B45FCAF38C6CDF9F8C53511
-:105260006A11F45731B5F344B45BBEB47B17E885DB
-:105270004FEFE9FD5880D6CBA7B7A7A422EEFFD900
-:10528000325B0A49CE73ED3E5D36A60BF2333E5BD0
-:10529000E5981A6C033F9B747D517ED707ACB74EDF
-:1052A0005A5E4F984AEF972DDB9980B4FFD265EF95
-:1052B000E6BBC9A4B8224FDB7805EFAFAEDBE4064E
-:1052C000BEDCEBF83E815D242EF17EF1B2654CF739
-:1052D000058ADCAFBE55097F3982DA9D8859953041
-:1052E0003513B7A10ACED338B3215E3F8F56C379A9
-:1052F000432762C91EA0F64762243E8F6C8FF7F2E7
-:105300009D18DE4017F6DFDACBFD9D524BFD751878
-:10531000CF5529DAAE2B06601CC14D692AB7E3735D
-:10532000EB5A4DCFC4B6E21FE7E6A9EB69D8DB28FC
-:10533000616F235F06F63660D8DB28616FE379E59D
-:105340001AB3FDD6A0EF171AF1E0AEB5CD3ED8BB2B
-:1053500081029155C57A765CC1BF426FBD2AED8549
-:10536000458A774523DB4BF175F03B6BADD2CE0E12
-:105370007C22CF45D19F2CC8A75FA89779B19FFF0A
-:1053800050DC5D8FA3FD62EC0FE5E1DE53B2BD2280
-:10539000F875C459A7883C773B928CB04878943311
-:1053A000DDD47E8C3BD3547F655A1F53FD551E9F21
-:1053B00009BE266BB0A9FD78EF4813FCB34157999D
-:1053C000DA4FF44F34C193C74E33B5BFB6A8D854A3
-:1053D0007FFDD4F9A6FA69DA2D26F8C679B79BDAEB
-:1053E000DF545563AA17A2EA49E0C71F90F7B0D56A
-:1053F000C37F72E0FE17279754FF7BE4318F24515F
-:10540000CFF7AEBC71DBE380F721AF9956DCD0510A
-:1054100096AAB6E2F8B62132AEA80DF5FF7805FBE4
-:10542000B90D7C8F2662B7E0BB94211EDDCF96CFED
-:105430003B598DB855433ADF9710D5FE42ED86C6ED
-:10544000ED3BED2196BBF385C76EB20E461EC4BE82
-:10545000DCEE04EF1DD2749395E4CDD021FB9EEDDC
-:1054600046F0C117FACC60F8F27DA7513FA5FE0BBC
-:10547000593F59B069D230E4DE9B02C47743477488
-:105480005BE995719136CFB71B25F08473E1C013AA
-:10549000CA30F13DCA7DC4F7280F10DF97905C3BFE
-:1054A000487C8FF210F99978FE6FE467A27C9DFC2E
-:1054B0004C946F927F89B281FC4B94EF544FE5F28C
-:1054C000BD6A8DDFFB63F53C2E3FA8AEE2E71F55BA
-:1054D0002FE6F293EA003FBF7C888C23B848EF4068
-:1054E000BF57200F06F902D1F72C57B9F9FE835A9E
-:1054F0005D6F897A3DAF661FF9AFC067A335E94B91
-:1055000067EBFEE285FD7DABF832C26E9B68F50F5E
-:1055100019C2F4EDE4E6FD21FDF90B5ECD3F84E810
-:10552000FB7EE6E49EB92AF45DD5CB8954F7BEA58F
-:10553000EDFB2753747EF10DF58FC17BC39C8779FA
-:105540003FDD934ED6EA108615D05FC991F1CB614D
-:10555000D6865AD4D77E2F3CF09B5F8AFF23EF83F9
-:10556000D792B98CF3C7CA59E9AF0CD7F7EF6BBF25
-:1055700097FBF7C33176AA1FE696F5B53793A6F3E6
-:10558000A13EC4DF1F8ED3CEF27C9B296F67F4D976
-:1055900086515CEFB27B906F3ADC1996DF730A3765
-:1055A000E2CB2FC5EF92FD8F91FD6FF83ECCDF87E8
-:1055B000F7691B8CF1B78E67098FAF41DE4F972DCE
-:1055C000DBD7EAED876BD47F12C65725C7574CED62
-:1055D000E5F859CE0DC73793E06DCBFAD834793E54
-:1055E00079F459BDDE2BE7DBC12A619C29417D4658
-:1055F0003B4DF8A9BF8C0CE145FC6D784A433AB7A6
-:10560000D7F319E2ADF27B895E791F578FBF6A72BB
-:105610003F801080F11B7949C6BAED9C1C4E879DD6
-:10562000D779A19DBF97A16EF7415EE7F8B400E876
-:1056300067755A787EB57E795EFEED173D9D711FC8
-:10564000E944DD5EFF07F45F26E9BF57D21F97BC30
-:1056500065B4C2CA1CFA6F709BF497F8227EC1FC35
-:1056600089FE4C0FD053A7BF62E047A7FF397A2DC0
-:1056700089ACD7F9E37CFA8724BD757E1AEE94795C
-:1056800013680FFA0FB34A7EA88D91F91E2FC51724
-:105690003E8C7BB208374588CF0F33F8A54A9E1F52
-:1056A000FEDF4AFF3CABBC47CE51E6E47BEA2EC6A8
-:1056B0000F339B4521EEE93CEBD35220278ACF7A6A
-:1056C0000E029E2D4616C23C37EA959CB6EBB5BF3E
-:1056D00034DB001BCFB3D06E406BBDD5F94E1CE45C
-:1056E0009EF11DA3DD95E7B5CB71425F2C1A135ACD
-:1056F0000BFD35B6C6CA716BB24C183E44FA4CE687
-:1057000073FA137CA991F99FDE030BF370BFA83CD9
-:10571000BF255CD2AEF6D05FC8D5C21F8A96A23F25
-:10572000A16EB1C2EF38837C5AFA4E618AD93E1F0E
-:105730001BB5BF7E75F6576C8F5F7D917BAE8F0C6E
-:10574000D1F7DD3345E67FF29ED1E621AC672FED40
-:105750009ED12C51CF7C30BA58E673D1FC2D3988BC
-:10576000DBF84515E0425165051F8C157556E95764
-:10577000FA4F54E4B1D7CEF8B94684F9F9785228F3
-:1057800050263F23F601BC3F6EC274DC1F3C2A77D3
-:10579000540F3C8FB83FCF36B43DDF9FF76777C4D7
-:1057A000FD79FB46CBF5B6F05A196FDAE7ECDEA6C9
-:1057B0001DFA2AE9DB1E3D8117C1E5CBA48F7BD002
-:1057C000BC5F217D0CF8EAAC1A81F70A3DE6BC23E8
-:1057D000E3FD6BDCA384B5DD85F5DD35FD9FEB04D2
-:1057E0003CBF96D47B34E8F55AD2C0D188C7BF9667
-:1057F000D4C1224B879DCB7EBB7BB4353E637DB449
-:10580000F657C8FD19F7058F6E2FEF0B8EC6EBD537
-:105810002264C2EF381DBF3F01AFDEB6F09A82C3EB
-:105820008EED81CF77771979538827F758DAC0F052
-:10583000AD36B90ECA778F2F405EF4C2F7657EC7CA
-:10584000510C057A77F1101EFFF0C583853597F767
-:10585000A302C0779953E2F164E0A5FEB8D73CDC1F
-:105860004E1B89FEBF5AABF279FB93CFC4703CEE5E
-:1058700048F0D904E0D3E0E332D5B3D28B75F89A7F
-:105880002AEF59FA617F17DC437A21BE267EBE7A61
-:10589000685BFCEC227EEE773E3F8B0DF21E83327E
-:1058A00067619B7436FCCEA41C3FCB1FB708DF0298
-:1058B000FEAF10D23FAA70BE2EEFA92418E75EA358
-:1058C000EDAAFC586A4FF576A7CC1736E89DE19013
-:1058D000F75866C40937E22042CBBD0CE3FDB4BBE8
-:1058E000BF187821BF764B64DEDAF0705FDE771E7A
-:1058F0007B48E57CF75762E5BDEF8D440F85ECD31F
-:105900002BFB56B9BA111DE7E66B65785FA83FA877
-:10591000E8F7F59E8A68C7F1F35C17FBD93FD15FC2
-:10592000BF75A8EEAFF717FDFFE1EF29B497F70EAB
-:105930002F7C353788712FAC21AD96C2BF8BC1F754
-:10594000C4D5C23FCF6C953BC3452FFEBD8C5129BA
-:1059500036CE33FFDFF67B0A1942E3F5F79FFD5D94
-:1059600085B1F2D179BFAB9091B0E28096D2FABB0B
-:105970001AD1BFAB90A1DF672D3C527F18BFA73073
-:1059800042F8392F7F4C9A59AF8C728F3CE0E6D2A7
-:105990001CEFC9B8483ED7B34375BD7231BA970BF7
-:1059A0009DEEF25C27F840FF7D9420F8D3F87D143B
-:1059B00083EEC6EFA4D4B697BF93F2CFF6BB28D13F
-:1059C000F489FE9D9468FA44FF6ECA702D96F134F6
-:1059D000AACCC57C6DD0692AFD657B00E77295FF76
-:1059E0007E7A1D8DA2D719B17200EE293D552CE5A6
-:1059F000FA85F4FF06AFFF14E4C58F8827E1BC8B5E
-:105A000053C643FCB55611335CE07E42CE97FD454C
-:105A1000ADBC07AAD62AE30101A22BEEC5FB2EF6E8
-:105A2000EFF23E47B28F6C1D1197A9E2F70376A7FC
-:105A3000BBD60B7A27309F2C5E2CCF031FB6D4F138
-:105A4000EF5DCCCCAE52B07F792C535386B547BCBA
-:105A5000B868FB1C8ECB570D847C9FF1074717D489
-:105A6000CFE82AEF8F14D98D0322ED911919322F27
-:105A70002B66982EC7BD320FCB354CFA09F15E3735
-:105A80009F6B28CE167A7EABE832A31FF8F813B6C8
-:105A9000E35B3CD2AE6EB4C97B2C03AFCA7C9EB52F
-:105AA00055EFB0DDBF91EC5A55DA376BEEE3384372
-:105AB00082C03EEEE331CD49187FEF35C2642FF44A
-:105AC000093A4D79C97D37BB4D70BF509AA9FDE5A4
-:105AD0007B3CA67A5F38CB549F7BC86B8207340C23
-:105AE00032B51FF881DF040F6E1C6B6A3FE44891EA
-:105AF000091E3DAC9B8CFB8327693E3316B983F2AC
-:105B00001E7D1927E96A97F654EDEDD29F30F2D742
-:105B1000357D1D44E7AF77B6CAFC757B95D46B9A8B
-:105B20004BFAB7EE64E156F95C4C03C3B81B82F341
-:105B3000C603E63CF34E4EE95F59464BFFC3AEE762
-:105B400099C766C9732F465E39F9157EE0BB876831
-:105B50009CC6BF77A0DF271ACDCF453ADDA3C7DDAE
-:105B6000D52ECFD3D5DE6EE7FD73CD656F5212CE45
-:105B70001FCFED0325FF6F74B67DEFD38C61328E9E
-:105B800012CA2DBA6E18B57B8CD416DB5FE7F5E729
-:105B90006D84BCABFD959DF3C62FD6DF8CCBE57C29
-:105BA000A65B2C332766B33FC8E7008D7E2BF47EBF
-:105BB000278D50DA9CDF8CC466BE774D24DA3DE039
-:105BC0005FCDB59C6177AC4852DBC07BEBB90C99DB
-:105BD000A77FD3CAD07DBD699CD3ED753679E140EE
-:105BE000D0067E18574076A40FF1D782475D448FC8
-:105BF000C7165B390E76DB8B2FCEC0D5F4E3453369
-:105C0000F3031251B09F08FB53CD691DF7B1E13288
-:105C1000EFFB415C2CCDF6CC0F3CAE163D3ED222C4
-:105C200042E7CE4F04DAE037CD7590CF21B8174A5E
-:105C30007EEA1C71CE0AFEE7FFD47909811D52EA83
-:105C4000C75627E439C78BE0CF38A7E2B9C556B4A9
-:105C5000DE85F32262AC128187FF182EE3FC878673
-:105C6000497AA31DE4D185DA91DD9788FD8516E197
-:105C700049745F24AEFE3F31FF0CAB8C337471CAA4
-:105C8000F3229DAD1ACB0B7B967ECFDD79FCAECB9C
-:105C90000D3D4ED6C92AD77D27AF5CD7E7CB85030C
-:105CA000FC7DBB26EF4D8BC62FFF8988AB18E757CD
-:105CB00062474B3962C88573E7507A4A3FD4A6CB16
-:105CC00087600F0BE71DDC1D6F5EC7DFEBF261AD78
-:105CD000A12F02E4C7E79BE484C0BE5EED3295E5E8
-:105CE00004C9C9831A8DB318F7B2B85B7F1FEEE6FB
-:105CF00007A41E1BEE2F7A10FB26B356DBC43ADE38
-:105D00005790F7C3CED5E3E4C581A8FB59747BFC5B
-:105D1000CC4AC58DDF8D98BDC25C3FD7F5E527F035
-:105D20001F6F8EBEA7C6D8AFBB481CE0E830DD4E63
-:105D3000F70AAF9E7FBF04E33B1394F75E9F3BAF30
-:105D4000A4C77F5A82CF4AF84E21227F47C2B00BA8
-:105D50000CD8837DB2887B5808BFB159D0EF4BADCA
-:105D60006DE6371AF83D97E7A1EFD351B96419FBF7
-:105D70003332BF81E401EFCB9DA07AD8812702A7FF
-:105D8000B9FD891D319C5772D2D7D01FFBB7C63ED3
-:105D90005D0F4DEE63B5EC8897F90D2E8B8437CBF4
-:105DA0007BEC17FC35D81F7E6C63E059D33907AD07
-:105DB000D1BCCF175D6A353BD9DFBC224F4B1E8E5D
-:105DC000BC74ABD7E925F81ED73EBEA76B1CF98F74
-:105DD000906BC84B599622C7CFF22B705AE2AF4A4C
-:105DE000E2EF6764E8417EBE2F487A228E29C8AB75
-:105DF000A5B2383C98FBFFA9FB6093CFFAE4FEEF15
-:105E0000D921FCBEB66230C359C1E6911F50BFD73D
-:105E1000692E0FE248D7D6FE624C2C7DBAF15F5D49
-:105E2000CBB8EC6C3E3F6094BEE1528F34DADAAE10
-:105E30005FAFCB9F3F0C17FA7D3592DF17D628BC9A
-:105E4000AFB6103C0EF83E793FA7019FAED3E131CB
-:105E5000125EB44CC2504DB08367E9BF93B6498F10
-:105E6000BF60FE28317FC405B6E8F119CC1F25E6D6
-:105E70008FE790578021AF00435E0186BC420979CD
-:105E800085E75F248DE27D6DECDB8D8E584FD8B7B2
-:105E90001B1DB13EB06F170963DF2EB23DF6ED2238
-:105EA000EBB16F17598F7DBB4818FB7691EDB16F41
-:105EB00017098B4157B5C2906BFE89267832F903DA
-:105EC000A323D633F6ED22BF8F7D3BD3F7B45B4CD3
-:105ED000EFDF28169BDEC7BE5D64FB998B15D3BE32
-:105EE0009E10CDACD767AF69C77C94E12BAA04BFE5
-:105EF000FF39EEEFB7D9BAB17CE038C6C2F258AF7D
-:105F0000A477DD58497F8B3C1FA134F3EF0B9CBE77
-:105F1000D32EE131E6FC6DA3C4BED7689BDCF7420B
-:105F2000897D2F94D8F742897DAFD13DE5BE174AD0
-:105F3000EC7BE139F6BD5062DF0B25F6BD5062DF28
-:105F40000B25F6BD5062DF0BEF61DF0B25F6BDF0D0
-:105F50001CFB5E28B1EF85E787691C2511720CF6E2
-:105F60007A0F939F497C68F233DD2618F67A647BBA
-:105F7000D8EB91F5B0D723EB61AF47C2B0D723DBA5
-:105F8000C35E8F8443C33CBCDE60B747BE07BB3DE6
-:105F900012EE57177819B1B5F16BBF3E80B2315E82
-:105FA000790CE70D43C3A7CCC47E66638CD22589E8
-:105FB00064BAAD66DACCD1B0C3F5FCC7FEA2D90293
-:105FC000F9A3C199CCE373869C57DAEFFB74AE6FEB
-:105FD00030CEC5E10FD1DDB743F0EFCE18FBEDC6F3
-:105FE000FB5E52DBFC7B517AFB56B8ED76D1FD1B94
-:105FF000ED38B72A621C38D18CBC19DF9DAE1CF875
-:10600000219B2C0AE7996C5A22F3A2A3F9EA0B5DB3
-:106010003E6DB26CDF877330CDC58A17E73E7AD408
-:10602000697CCEACDF7461517DADF3E9FD7802E7A8
-:10603000D5BEA1CB3D63FC467C94E4059F1F1CDAD2
-:10604000DC302A91DA6B8191FC3B38E3ECD26E2094
-:106050003FF40AF8937D038A7F7D049FFF69B8D4DB
-:106060006F5A408EE3C9C727C8F762E57B4F3E9E53
-:10607000C0FD4F58AA709ED9D02DC28F73CA8DFA19
-:10608000F8FB6E09ABE8AF78A9ECCFF86EF1DA2E29
-:10609000769CE736F0552C1A47E33E6991A7E04E0F
-:1060A00059D1CBAAB15DDA61BADB023BE852CF41EC
-:1060B0000DCB4B1A833C44512FF8DED0F1796F9B06
-:1060C000E6CBE8CAC7EFA00AF60DB5C02D16F43B23
-:1060D0008110D00EF16482311F4D13559984DFEB8E
-:1060E000A61633BEB3A60B05F8EE337D9D2585DEDF
-:1060F000EBABBD6481BDD6AFAE914B631EDEA14953
-:106100002AE07136F7188C7FDC1885E547741E0F7E
-:10611000EC038697DA589F1BF6C3C2F873793E7F6B
-:10612000429ECFE94336CEF339BDF40CD717EF8C3E
-:10613000E1BC1E6D8DC272CDB01B8CBC9DB25BDE0E
-:10614000CF077E8E6506372575673D9F3802F93487
-:10615000DDB627E008CE89A53BAFC3D1BDD34B77D1
-:10616000CADFABD5F7778CDF3D15D97ECE0733EC90
-:1061700040A1D6DB23F7718CDF4F23F9C9ED4EEF39
-:10618000B1BBF9F7EBF4DF3B35E23EC56FE41E042B
-:106190005E8B1F95BF7F366BC5AAC2A904CFF13BAA
-:1061A000C3F85DACE87CACF95176E0C57EEFB4CFC6
-:1061B000083DFED36AFF31BF9C795DDA7FC56FEC85
-:1061C000BF56DA2B36CEFB9F5E23E37562BBE0FB46
-:1061D0008FA6D78CB2E01EE9E93BFD5EC5D36A0706
-:1061E000BEA5DB2D93CE66307EDFD5ED946B917F1F
-:1061F0004AF81DD718A3E7ABA57379FD59998F3AD3
-:10620000C925D77BE37382EDE9968043E611D60B6F
-:106210003DBFD5CC773E41FC41F4B9CCAFEC47DA79
-:10622000F278D83DF4BDA9B083DA818F8B97215FD6
-:1062300096DE66BB339A8F2759C353F0FD495E1B28
-:10624000F3D73FE263DCCB714E2E89AA9771CE5F04
-:106250006C90BFE3305593FCDD57E7EF19717AFC82
-:10626000C925E34BE7E2011824626681AD33912F23
-:106270003C03C90B1D795A7EE4EBC567CBFAD97F85
-:10628000D83A73299C990BC425D43BEC7C7FB5E6A6
-:1062900072F2EFD05C284E80F800E4E34DB7FAECE0
-:1062A000B322E463C1C882D5FE0111E71DEF9179E5
-:1062B000500BEFE9D9A1ADF3B646399BF08BF53120
-:1062C00023B1F1369C37AF1921FCA307C9DF99E44C
-:1062D00079E1C44D167E6F52C25B47BCFFE715D90A
-:1062E0008C0F867F35E28599C8872977361682DD3F
-:1062F0002AB3ABC622EFBA550E69FE8C4CC8215F9B
-:1063000018BF1B76A1B8C3D611920ED1F187D9D987
-:10631000523E0BFDBEF04FEFD9BD0DF2DC18FFA7CA
-:1063200017F87D8C8D232CFFADE73CA2CF777CD076
-:10633000477B6804E21A167F13F2E83BAA757AFEDF
-:10634000ACBCD7C3A06F4CDD771CEF28D1EFC327BF
-:1063500079C2FEE42CBFD35B0339922596E3BCD00F
-:106360000C5534F3BEF1797497787C7CDA5FE723BF
-:106370001FF7F15FC5CAF33A3AFEA6DB1B5E7666ED
-:10638000B6E2EFE3C5FF6293F22BDC13FB723754E6
-:10639000C5707E5BC1C8A22D186F5CB697EFC1585F
-:1063A000ED97FCE4EC56F47BC8C1F2952F3D86FBDB
-:1063B000122AEB33F977658AF7F896E39C63C148B4
-:1063C0006D07DE2B76B9F9DE908AA549AC9F66741D
-:1063D000D0CFBF8B66DE8733F0FE861E9FBA7FA4C8
-:1063E000FCFE29DDCF80209C686A77A1389DCCBF58
-:1063F000417E0EE28F9A6B17C709DC77C87B2AECC7
-:10640000E23D197F4C6B3B6E90A1C71BD3BD323E62
-:1064100064E0EFDEAC592CE76C463CF71CFECCE7A1
-:10642000318DD2ED97F6C2AC5B15F6574B56AB7C6F
-:10643000AE7C8C3A8EEF7159B84AF1F0FA7AA03BF3
-:10644000E77B2FBC87AC310FCE97790A3BE4E1BEE6
-:1064500075C50DBB643A681111DF29593398D75BB4
-:106460004990CA36EE3535CA1B57EDEFFC9C0764E0
-:10647000F4F3FE6589DB6F4F8E58EFB3EB14D3FD59
-:106480000A062CF02316ED717F3D29481AC7F41E29
-:106490001E05FB8A6EBFC4C34DB766DAF17B24D3F9
-:1064A000E9CB969C0BF7FFFFBBFC7FC4BFEF53000B
-:1064B000800000001F8B080000000000000BED7D35
-:1064C0000B7854E5B5E8BF67CF2BC94CD879910458
-:1064D00048D80904C2439C109EF5C1CE0B2610601B
-:1064E00092808227840904091EF446D4126C940910
-:1064F00099C41051138D0629EA80C0A16A25564F10
-:106500008516DB017C8B8A20D6B636191E8A6D7DF6
-:10651000A470A8F67C54EF5AEBDF3B99D99904D0CC
-:10652000F6DCDEFBDDF8E1CEBFFFF7FAD77BAD7F0F
-:10653000A7289DBDCA2631D6DD2A48DBD318AB94E7
-:1065400014F3441B63DFE2CF0CC696B5088A6F7C58
-:106550006FB9289D2D75413952B1333699B10A4929
-:106560003627A7E15332C7C2FB65B71F30B178C6E3
-:10657000968F644CC882F6B10EB30DC75F05E30B6E
-:106580008CDD20F90BB0FE86F132AB8B81F6DE2C70
-:106590003383F9DC9BF83CEEA618F31550AE304A75
-:1065A000E6142897453286ED617D3EEC5FE957CCD5
-:1065B000B1361C972D2DB1F1F5C606ADAF425D6F1A
-:1065C000654B8C7945C8FB56930CE5C58C291D415C
-:1065D000FBD39E331481F6B3CC5B9CDA0EEBADF4A7
-:1065E000D8259CB7D2A8981DB82E1C17FA2D6E6B13
-:1065F00037A505F5BF423150BF198A4CCFA2747F31
-:106600008680FBBD35C281EB5D2CB598109E451A86
-:106610009C1FE6705821F93370FC15560E076DBCAF
-:10662000CA363E4FDFF5717857B6559865A8BFD189
-:10663000E84A6D87FE37C23A3DF05CBCF94086807F
-:10664000CFEA088700E7C12477AACBDEDBFF938778
-:10665000AF4FA5FDC3FA11DE76873C3309D6B3BC34
-:10666000051623D393E62DCF66D51D4170BB5E3151
-:106670003296804F033D594BBB621D0CF060FC67A6
-:10668000B8F9480EEEA37E0C631B601F6EDBCF7360
-:10669000709FD29D8C89D361BD9BDEA3FAE5494CE6
-:1066A00012A0DECC5E10B0DE5C097DA0CC3C054AB9
-:1066B00020938FF56D3A63293832B4B701FE789292
-:1066C000195B3755A67917B3C0623602C6D9540C88
-:1066D00073C03A13F93ACB07B1EA9F8581579BBA49
-:1066E000DE1BD4F32E33B097596C6FFDDDEA79973A
-:1066F000213E07F5C7F170DCD55A7DAE3FE3D6F1F8
-:10670000BDEDB579CB62793FA407C4C3D52A1E601D
-:10671000FB35D49E970B44DB8606D8CF9AFB449F6B
-:1067200045C0E7930D83B1FC9CE040B8FF79CD8B69
-:10673000EF5C07CF3F3DB2AD1CF7A7AD63C5D7599E
-:106740004C8E83F3FDFA2A7A56FAA73339BBEF3E13
-:106750000F4F75FF48991C843F0FFD74941BE6FF93
-:10676000F3B36F65209C3F021C1001CEFFF6D327C8
-:106770004D2CBD77FDCB9ADE3355D882E12510BC78
-:106780009A338FD2F92DCFE4FD967BFF5281E7C17A
-:106790006C663923ADEFF957789FE3ED6B1CD4DEBF
-:1067A0006DFB809FFF102689C9173F6FED7CF5E7D1
-:1067B000FEB8C9E54F12F07C5A42E85FBFFFC7D46C
-:1067C00075FB54FABB41C5E31BAA5AA9DFB2A68ADE
-:1067D000274558F7628D7E2B43DF6BE773769389ED
-:1067E000CEE7ECA68CC6242C77F0F3F977B163C220
-:1067F0005A68F7E7D53B6F494EC755FB525D57F0D6
-:10680000F361D9FC7CF0B912CE87C5853D9F3DC1AF
-:10681000E7B3F2097E3ECB9F7DFB0FBF9009FFF8E7
-:10682000FEEEB3F890FF2EEB78EEF80FE0FDE2A657
-:1068300056531AB4FBB59246FBD2FA2FAFCE9258FC
-:1068400034ECAF699B09F9C0AF15392C9E6B7065AC
-:1068500046CE671E37C1D9C6503D13627BDB2F661B
-:106860004A22F211E619C676C6F75DFF9F543A2A0E
-:106870004A779813917F3544B1ED12AEA3E27E368C
-:10688000A16F7BED792A82D3C5329807E9F3548E44
-:106890002315E9A2CC6008A137ED7942A5AFA1513B
-:1068A0001D8B71BD43E398540F20FE71A4926B8041
-:1068B000797FFC03AB54EFC0FE6E19EB2D562679A1
-:1068C00000E4DB0DF244C24FC6AAEF494658062643
-:1068D00023DF1BB93AF0175C1FA253C444FEB4C3B4
-:1068E000BE2D391C4FA0CC06F3F77E7CA6183B8842
-:1068F0004F45D670FC33B3F7A96C06BE8578ABF56F
-:106900001BCA8E08F83E19D682F337672EA3F333DD
-:106910008DE4F4D2DFFEBEBDC4FD9D4A73FB484E3C
-:106920004430697B0CED6F0D967BF697C91403F428
-:106930002FFFD115DB9A61C85375CA4133D49F5AD2
-:1069400067A3FEFFA8FDEAF7B9B8B222649F3D74C1
-:10695000D3027C2D0D9FD9A9B8CEB3569808EA4F23
-:10696000DD1A6140F89F4AE3FA0263017B099CCB80
-:10697000AEF5F0AB85B1DDEBADF47C6A3D20D368BC
-:10698000C69E599F44E567D7CBF4EC589F49EFD397
-:106990007338FE95452AD12897BBEBECD2768487D5
-:1069A0009FD34D67CD088203E8099C1FAB7A41A7AE
-:1069B00014B0C706F169901FF7A1BC633523D84E08
-:1069C00098A2B3E594DD301EF192AF4F6B7FBBA967
-:1069D00085ADC3768F0ABE9D306ED4EDEF1524A22F
-:1069E0009C6E4BCB12A0DF929A73C40F97D806CB44
-:1069F0000CE5B8CDDD3815EB37A7491BA05B545B20
-:106A000056670DF45FE11DEDC0F6B70B7223CD5B49
-:106A10002738705EF851AC53800FE06F505E697B91
-:106A200075A4CA2F0DC82F97DFBFAE3119CA270C26
-:106A3000AC5B04D014198A6762B9684B8CA31EE55D
-:106A40006D3DDF0FDB0A7CD4DACB470BA7B9AECEA6
-:106A50008173661700DF60FCB1B03626E27E3A141F
-:106A60005C3F03BD6327C3F5BACCD8FF972ABFECC0
-:106A70006C3B6197D5F32946BA71779FB807CFD59C
-:106A8000667034CB28DFE5776584FB1B22DB2E2381
-:106A9000FEF0FA35765E0FCF0D0D50BF669BE843D2
-:106AA000781488658303A87F6D16892FAED8563A6F
-:106AB00018F58D155046F9B505A7027C6A6CCBE335
-:106AC000ED5A0B1EF1003F4D15980BF9D16963A0EB
-:106AD00018E1F1E9B6C4D83AD4F76EAE1FC5A0BE2E
-:106AE00072DB3DA9F8FC745BC422E4E3F952717EC9
-:106AF0000CEA3F5B63B244B997CEAA72389DDD744D
-:106B0000735E22CABBD5DF1C7A5C02B9BA0270542C
-:106B10008271CF7744F93CD064F5FABDA922A096E2
-:106B200025DEBD3C07F0EBDF0DFBAF9B8E7258F00E
-:106B3000ED4AA6F672A2148E8E357D0AF058063CF8
-:106B4000BDF9EE0F699CCF0D87E72D86FEAB6F7EFA
-:106B50003E1AC7F9F7878F4D91E0FD0F26B9FF1751
-:106B60008EFF2761DB2E0940C2366F9B80F2A33A6D
-:106B70008771BE1AEBBA6E3187AF63BBDCFF7C5501
-:106B80007B0582A7565EE21B6466A897FA9959C2F4
-:106B9000A7C4480FFE54643528DF35BD447B5FAF82
-:106BA000C2E5D3412DA978FEAB76B5A7A2FCF8A328
-:106BB0009D97DD3B5E5B7127ACC3DD669018E09D61
-:106BC000DBC848EF5DEEE1FA34AB026692DC3BFFD6
-:106BD0007D3951B4FE559BB343E41EC8479AE78FF5
-:106BE00046E6C4750CAFEFCE42FDE9F746FF0A3C1E
-:106BF000D7DF837EEA49C373E2F8F7FB167126BE3E
-:106C0000F7DC2EB00C01CBCFDB47DA480F33105F37
-:106C1000FFA5C9B713DADB2775F891EFDDFC42CC8D
-:106C200044046381383E11F167CD3ED3CCA15C9F13
-:106C30009270F6D546BF39DCB9DDA4EA513DE517BF
-:106C40009E3323DEAF7E06F401A4CF17041FEA377C
-:106C5000AB3B9E7B75088C77CBDE8A6C9C476B7F49
-:106C6000CB0B1C0E112C602E0DD2AB2B32631B876D
-:106C7000028F7CF6C0474B1F862D55E039FD80B151
-:106C80007D333E70D78DC4A744FB64C66ED2C74126
-:106C9000BF32A3FCBFD9CBC7BB39F368633AEDABB6
-:106CA000388E059DFF9E1C13F5D3FAC3BEA95FBDA8
-:106CB000F5EE2702B05EA5DEC822AE85B2917DB4A6
-:106CC0000BE1C7A2A59DB80F233BFD2A3CD78A83C1
-:106CD00058333CB756AFF90F6A5F67914478D6DFF7
-:106CE0005CBB2700F3C9227331E8EFC9ADA6F13CC4
-:106CF000662E7FDAA39E7DF44628D72CB03900BDDE
-:106D0000A11C4DF0D9FF4303F1F964D67DC800CF33
-:106D10004406540400FA539AFB30E237FDC0B86BC6
-:106D20006F937DC88F81830B88E75FBE74261BD766
-:106D30007DEDF0C039C42B53DD19773ED0FFFB3910
-:106D400012D74FC607B2B15DC24195AF198F907C83
-:106D50003425C9B1A8AFF8712C5CDFDF0C8407FBC8
-:106D600005FF9338AF06A7885CAEFF19B2DC7F4001
-:106D7000FEA708A63BFCD07EBE10EDC0FD1E891507
-:106D80003326023D7F69FA280DC7F500DA8A437B76
-:106D9000F5D85C75E9E621D336235C7200A0EC6A75
-:106DA000B065C6C7322394EF65866E0BAC23B7FB84
-:106DB00077DBEAA02C3D38888920AAEA2352592E95
-:106DC0008C2F1C848DC27E0E8E3FB81CD7796FB776
-:106DD00095219C983554CF351B92FD3F427CAE8E59
-:106DE00076B02494431D59C88FD82D364733B45FED
-:106DF000722190F1BF502EFDED30E9E963D2DD5FE5
-:106E0000E17E8688CA0937D4DF2BF9473C80E3D777
-:106E10004439EAB81C61C1EBDFBFEE6FD171D0EF2E
-:106E2000CBEE51C63DD0EE4BC5EA000D9675DE396E
-:106E3000EEE5ABA07CB52A4FF4EBFA324936A2DD81
-:106E4000F165B7D58F7AC89736834F0090E6EE3F4D
-:106E5000F4A100F23BD76AF38BD1D8CFF459B0BC80
-:106E6000614752623E194722867D0BF01CACCAA5D1
-:106E70006B0785DA8F4372B91D342497F31FA3EC97
-:106E800020389FF5185933E2218332CE6BB44ACDB6
-:106E9000B0BE5FD9762D01CA6767BF4E1F8472E30B
-:106EA000ECFE1183D8F8FEF9E231D427404F583A6E
-:106EB0005149CB9DDC2B5F17AA708968B9DE84F03D
-:106EC000A8077834033C16DA0C7E0BEC8B2D088572
-:106ED00003ABE92E47BC61866807D20D9E2F9EBF8B
-:106EE0002C18BAD9557DCF7BC605C9FF23282F8121
-:106EF000F344B8969FFDE48A07189DDB15B9097421
-:106F00008E0D57B2DEF3FB573B2F667434E139AC7C
-:106F100015ED2D780EF546AEEF7900B776C650B771
-:106F20005D782E6BEB47D2390DAE073E81764A9DD8
-:106F3000916D8F47BE7294DAEF54F54196594D7CAE
-:106F4000A6BCDE2221FCBE8A8CA6FE0CCED5342443
-:106F50001C9FE17CA5A692115F593ABE5AC0734F9F
-:106F6000C219603F9D86801DF71988002D129EEB87
-:106F700072D389CE87224718C1CF19FB3FB6CEBE48
-:106F80001DF98D681DFAD8691045ACA93B7A2CAC67
-:106F9000AB4D601DB42F93CA3F56D9489F6B8BF100
-:106FA000117F6B5B38CC817BFD92A9F55591C45F55
-:106FB000AE3218A8DCBD7830D9636D31C05A71BCCF
-:106FC000C563496FF8F93722B7D73218AFCF62A33C
-:106FD00036637D71268DF74B8D5FDD67A7F1DA8A09
-:106FE00095E448AA1F6CC0FE4BD3DCB7217E0C1180
-:106FF000793B503CA8DD962D4A329EE7961233B578
-:107000007B44702D5E81E35C6123BD31B038F2D9E1
-:107010005DFC38FDE85FEAACE1FBD6E860DD54CE0C
-:107020004F877B4E3C8AFCC3930B27624379F1C5A3
-:1070300012C46B458C76000AF739E7AF7AF09C757D
-:107040000370597C6427D9EB72064360C3F9492C5D
-:1070500017F1E410C013DA7B4C70CEF1FC9C37C4FE
-:10706000E339CFDB167CCE309E672DBC17D6443B70
-:10707000846974CE99387E0D8B74A07DDD737EBFDC
-:10708000F265E1533438922C008BBDE9EE8755FA56
-:1070900025F83EF607D81FC0A5DC1298DC82FAB9A5
-:1070A00081557584E1034FE472FB4062DD2694AFA5
-:1070B0004B35FCAFD5E17F6058CC27512AFE43BF4A
-:1070C00017135DDBF01C3E178E4DC19787FF2E2EE8
-:1070D0000A37FE4F54F9F266BC6B37B61F693C386D
-:1070E000EC36D437D65948FF65170E0DC379D7A6AD
-:1070F000B99EC6FA8891DD66F44F7526779B707F3E
-:107100009D8BFF94827AD6D29AD7883E2F757D1BAD
-:10711000A22698506EC638B34C01E89FE8CC7A0599
-:10712000CFE5E85C8B6C09E3073930776A0AEA43FC
-:10713000C70AA7A620BF3C9602244FF2D461473E5F
-:107140006ADA7B851DD779CC994D6599C96AB9747E
-:1071500040FEFA67E0AF7E5004FE08F61A3ECF808C
-:10716000BDE6077EFB31D86BF83C05F61ABE3F0141
-:10717000F61A3EBBD63BE8FD31E788BD8817E75BD2
-:10718000B81F65B9D111562F5BFD8CC8FC1A7F83DF
-:107190007F37ED880A29576D8D0B29DFD8061864D3
-:1071A000ED2D576E1A1152D6F4CF65DE7121EFDD49
-:1071B000B5D921E5FF67E0DBC4E18BFEF27F25F85E
-:1071C000E2CF269077A5F80BE0F7DB9367111F3D20
-:1071D00026B0EA3878C6489CFF195D02F9DDF0A7B1
-:1071E00005E47609FE027463B4C90D58EF85F60F05
-:1071F000425BB47DD1FE60CC61AA80F70B9D111279
-:10720000CAF3EB5835D1D922D642CF1B58073DCB14
-:10721000D8117A96334E875F5604A6E0F3837877C9
-:107220005A1EAC7FB5D5FD443CDA6D29EED171C84C
-:107230008F6CB16497F6774EA8613355CFB54D5139
-:10724000F7053F0B70EDD0EF68D4843BEE907BE701
-:10725000D1C687F9AECC433E63E2F3BC3D796A0AFE
-:10726000F207E64A08B1A7FA9BAF559593154E0E63
-:1072700027F4D962F9F442C1B701CA075A2D66F45E
-:107280002F9CDE6852F5F5BBC9CE3D719CFB654E67
-:1072900037CC4A45FCAB6B1D9D8A787EDA2437D407
-:1072A00000FC4F4F07FEED203F8E03E5C349A79D2D
-:1072B000FA83A488CE82735BAEEEEFA4EC30AF838A
-:1072C000F60B9345E681F66E4F5A34AE5FDBB77E20
-:1072D000DDCB365942F060FEB4D0F24266EEC5B75F
-:1072E000343C6F736F3DEA4962D920F7007677CD61
-:1072F00047ABDE7D39085F6FC8B3C723DF6453D95E
-:10730000D46FC5DEFEFDC1F7ABF555EFBE6CEA8567
-:10731000AF865793F25CCBF19CE0B519E916E062B9
-:1073200040797C6C2F87636BD4B5F75D0570287945
-:107330005F641CCEE59EDF233EEFE37E7DFD3C01D6
-:10734000A4EBD148AF9CAE2BBCEF91FDB6B4B6D840
-:1073500084EB2BB175A7A0DFE9C05DA353F05C8E71
-:10736000CE1D9D827CE350E1E8C76E8771BB8A44E5
-:107370008705F0E940D1B9FBB07CAC569470DEAE25
-:10738000BDE754FED2FDF65458DF174E13C9A1AE27
-:10739000BDFF1C3E53B20FF80CCC7FDEC7F9CC4AC0
-:1073A000A38B35C2BC2B012E68C7FFB3F9CDC5F83E
-:1073B000CC5193AB2001E1552738D0FF56576821B7
-:1073C000FDE128D08785E353C3EDC827A781FD2BB6
-:1073D00021BEB926A34D796CEF88048417F32847A2
-:1073E00033A7F4E2FBF2DA9545E85F679B4C27513F
-:1073F000EF466708CAE712663C1908C253F70BA6A6
-:10740000DE32E1B5F1642008AFF578BA4787A7E727
-:10741000D98554733AAF3F32B897EFE14F307FB917
-:1074200045F437B2B45EBCFD6BE17BE5A824005F98
-:10743000F905E2EB0F27A6BD141082F8CA25F2B1B8
-:10744000D6A86F48EEB5477D4372EF7821977B074A
-:107450000AAF3FF83BC4FBBB38DE1F5B3895F0F248
-:107460009809E419C0EB686D7634964F6D2A253A79
-:10747000D3E8473F4F978AFF5ABBA5C66E93230CAC
-:107480007EBA6BC590F3CC7861C920F407F4B77E5F
-:107490006D5CAD9D36EE525D5C573FEE27795C4FDB
-:1074A000CCD85136E0F86000F6F6437EC2227BF17C
-:1074B00055443DE07AE601F87439397CBA8AAE2742
-:1074C0007A3CEED4E8D2CD301E7B7481E843FDB522
-:1074D000CB798EE8F43CD0298DD1CFBC9FAAF4F9AA
-:1074E000894A9FA755FAD4EAC59D0F5F77038E5B43
-:1074F0002B129F3EBA203B01E7FBE38E0C9A17D676
-:10750000034605E8212FFFBD024C34E40F76E45F0B
-:10751000C7010E6827942E2C257BBAD4E44808A70F
-:1075200027E8F7AD1FEFC05C8B81F1F188DF95DCB8
-:1075300055CA1A912F001C103F8F637BA82FD9C901
-:10754000FDC087B07D7C309C4693BE727CB7E04026
-:10755000D161DAFB773B9EC32A5F28BF58B9392A2D
-:10756000E4DC56B4C485944B0AF93E8ED78EA0FD58
-:107570005FEEF969FD2FF5FC6F52FBE39ABF253DE5
-:107580002536643C0452E87CE9BAFAB1BAFA89219A
-:10759000E58BE1E309152F34397222425E122EBECB
-:1075A000D435CF52159CA7313B9FFB5B66E773FF39
-:1075B000CBE5CAD582FCF072B5BFFE1A7F1A95E7FB
-:1075C0002ACA4739EA2F35E1BE2E951F05C9E105C4
-:1075D000D43F2098B17FAB2A67AB3A38DEB547DDA0
-:1075E000FF2AE2D5E7AA9E0E7849FCFE0B95DF7FC5
-:1075F000F19F6AF9A702E1E5A17D6BA3516F3FB34B
-:10760000777434DA61273BEAA391EFCBCC13FD0307
-:10761000C0C7CF5C203F61BA4F3B06969F7F54F9AD
-:10762000CE193C07929B129DC729557E9E40F94971
-:10763000F23E939E47517E42FD82E7543D7DB74026
-:10764000F4BFCAD812DE3FBD23945F556D8DD2C9F9
-:10765000C950B959B96968487999774448D95D1BC7
-:107660002A370BC432E2EB677C1C8EA5CEEC90F679
-:107670006764395A22F870387C6192A311CF4EFAB0
-:10768000E2A283E945E3BF477570388D7040FCF492
-:10769000960E8827A7D4FE5A19EC4213CE5B6A7562
-:1076A000BC128F7E844D8203E3540C78CE3438C7ED
-:1076B000230BB29E6C0ED233A40291F0F984F750E2
-:1076C0007932F21F30C0D0CFFB5AEDA154F4AF563F
-:1076D0003C13457A937EDECAA2503EF3594371EEC5
-:1076E000EFA15FE9FBA2CF8AF0288A21FEB5E0393D
-:1076F000D12742B9AB362F3A781F67543AD4E4CE3B
-:107700004A6375D873ACDA1A7A8EA5457534CEB152
-:1077100087850E61103C0F4C0749DAB75FA991EFDE
-:107720007FE53322F977577AFFF236C61557821E66
-:10773000886AC26B4DF5F310AF4FB84C06E2A71D37
-:1077400071F3103E9E05A22303DA1F6E1A41787E64
-:10775000B2296F30CEF772BE48747566AFC5205C33
-:10776000094F9789F9C95EF5D3797EE62D25B97160
-:1077700006E1827A905122BA78379FFB914EC03849
-:10778000586F003A417DB8CB273A7D61E8E3DD7C54
-:107790007E1EA72E3C40F8F3AAEF5034EA15273A94
-:1077A000F8F8A76AA5688C4FBDE5CDB6D3FA8A6014
-:1077B0005CD47BF75D4F72F28C97E323AE93ECC3FE
-:1077C000262E3F8E7997DF3F1DE0F1F92691F4CE0A
-:1077D000CF9B4AE74DC7F3DE64A2725EF1428A6F27
-:1077E0001CF371F972DC77AA1CCFEF8C174E1FCAFD
-:1077F00075FBA6BE3D291ECFD944F850F94CE8B917
-:107800002CDC144A5FF0139D057A5725FE26E3FF12
-:10781000949968272D4B02F909947BA2A8D484FE81
-:10782000C9124FA83CB2B06213E21DEA97D86ED9D4
-:1078300063A593FD487F1E81E4E5D217009F603D5C
-:10784000A61D5793BCAB68B184CC5B521B6A1F2D3D
-:10785000D3D9437A7BE9B2E585A9BA3C9CBC1854DC
-:10786000A0CA0526CD44B89F04C3BA390BE0F982FB
-:10787000A860F9BC3782F867C5D2B3D7A87AE9B552
-:107880008807CCE161D3343B3D88CE9679459D9EF7
-:107890001E0A5FD09F3F41FDB8294E95A39E52F22C
-:1078A000D78DCA53620A701D976A7F5FB27E5BAE46
-:1078B000EAB7E5A4DF1E5B08F202F673149B04F539
-:1078C0003FB0F07AF2EB1C9F7B3DE9B9C77BFC3AF5
-:1078D0002ED5AF730D9DDBF122C067921B0EAD3C20
-:1078E000A01EA1F18B8FD57338A5F2C9132A9FEC86
-:1078F00052EDAD46555E78557971BC48B5B7E21981
-:10790000C90BA3516197C2676E6C8BD2C987389D32
-:107910001D3554773EA1F262B7CB3DB300E0664916
-:107920001A1BF2DE244D0C2967ECD84FFEE3F3322C
-:10793000CF27BA077102E3250B797E16B37690FF45
-:1079400078A143A6FAA1182784F66852611E898699
-:107950009FDA7B299EBFD7CAB1B0EB3A6C97D6416C
-:10796000E5FA858C611ECC486D1C00471DE8094373
-:10797000D18F0DF324818186ED357C1FB6A095DA79
-:10798000E5563149807655056984E7494C21FE3238
-:1079900078355330DF85F99EA7764FDE0DFB00BCAE
-:1079A0000FD4CF20BBBCD41ACDE3DD201F07C6B354
-:1079B0003A4E3FCE38D25B8619396AF68BB76ABB2E
-:1079C0008BE16D901E7407D10533903FA2356A821A
-:1079D00009F1B4C4E622BF01E0F5923BD05FF99211
-:1079E00099FB091672FFE4D1C2A98FA1BD3B618F3B
-:1079F0008D7CC94757003E137FEFE676426DA9079D
-:107A0000E5DE074E2EE7C6EDF9CC80F96E5D7B9979
-:107A100003CB876A9F3FFB26D2CB0281EC8C63B5F8
-:107A2000799C2F33E6C2FCCD63CEBC0D549E0686F6
-:107A30007116D283B2C188EB00B83653FDF2FB2633
-:107A4000A3BE735824FC4D52F38C243CD7E4DE7261
-:107A5000BCA296D95E2A2715F1FCC05FA8FA41871F
-:107A60007A9E3F51EDA05D2ADDB4A974F3A04A3798
-:107A70001BF5FED0AD9C6E46191DF745417994C7A4
-:107A80004E72E6DDA253B46EA07F09E3B969856248
-:107A9000F32480DB384B80F8742988BD0DB09F9C9F
-:107AA000A23ACA5F2C75338A57942CA8A3F50530E7
-:107AB000B67415EA4D7582A8D6237F1C17E7A7F682
-:107AC00025562661FF52E77307300F77A11B40034D
-:107AD000E5FC057502C1A702C683F6076A1FA2F17D
-:107AE0008E57F1751CB5F3FEC72A98E481720673B0
-:107AF0001EBC9DAFD385F1D0E3B5CF1F20782FE01A
-:107B0000F0BEEA5343083D66F92343E87AEC8ED889
-:107B100090FAD19B878494135CE921EDE39CA1F456
-:107B20001E39726248FD3167A901E5ECF9055A7EFC
-:107B30000FF78B69765DCE1E9B01E171DD5C51F321
-:107B4000E31AD860B4BA18F97D9B543D91B58C60A6
-:107B500098BFF1E49D06CA0FD8B8A0DE8A790FE776
-:107B60003B8C745E302EF191E3FB8D34AE35CD2B22
-:107B7000A01FF35E80B318A4FF3569F24DF5ABE3A7
-:107B80007A8C41EB899519668CF5B46F53F1E92134
-:107B9000751DC0B7734C38AF8BE3495C113398A0A7
-:107BA0007FC2022EA7F574D9A1F6FF89DA7F978AE2
-:107BB0008F5DCE273744225C1631D2470AC4D51BCD
-:107BC00022701D458CE8B1C37F3032587FFC457F61
-:107BD000E32CC82EA0713C9C8F8E9D2FD447E0B91A
-:107BE0006E0DFCE91D78FEF2F3C60DD1B0DEA704E0
-:107BF000D68114A5F14F4DFFBEEA8B26AA1F3B117B
-:107C00004C34A8FFE517CDBCFD1426A3BFEB17AA83
-:107C1000DC6952E92763C778F22F9EDF6C26BB67C9
-:107C2000D7BC95DBDB60BDA3E7DCF5D40B882FF375
-:107C3000EEFADD0B72AF9E5F3A2FB913F3F747AD43
-:107C4000B733E40FDABC193B3ECBA5754B468678BB
-:107C5000FAF4CE9F2FC3F17EB22BD2A0C0F84F6FA3
-:107C600037127F1973EF63DB37B3BEFE985267A8F4
-:107C70009DFF938DED4FEDC5F735CF3F713A284FFE
-:107C8000E7D8DC7B52D06F7A747D555B7E46FFFC73
-:107C9000B3D4CCDC18BF73FEF2B39FBD05F3FFC6AF
-:107CA0003D6662B01D306A26F7FF1C5D5FD3960FFC
-:107CB00076EA5891E72930A36703C263EC8B8365AA
-:107CC000D4DF80148C6E80A57376844181FDFDC65F
-:107CD00067DC467C60F6C60C3CCFDCA78B0E7E8A48
-:107CE000E77C5CC5F77EF491A3EA39F5944D32C187
-:107CF000DDF39295DB378A9C42F6B1434E2909D2D7
-:107D0000E78EDEA5C5971C7F403E5E521645716525
-:107D10002DEE223AFFD2807C7EE9B4EAC912AD3F53
-:107D2000348E3F04E1978D715E1EAFF7788C8CF234
-:107D300082606B48276BC5B1946FF2E1AA1F52BCF9
-:107D4000DE53679132E2296EB007CB35C0772C93B2
-:107D5000288EEB43A1BD7826F7239C5B54FF9859EE
-:107D6000EE1FFEDE8B9C8F493D1FFDFBC533B91E08
-:107D70005A8FE79211722E07DD93C29C4BB495F097
-:107D80004B3B1731BA89CE85596D9998F791C851F7
-:107D90000AF7F336CAA1CEE3DC5FF69BB2DBEAD684
-:107DA00042F9EC85410CE9428BAB9427F1FC033A94
-:107DB00012E05B26B57FA2AA77231F43BDBB5C8D73
-:107DC000BB742E611477D1C63B5F3348E2E3DD42DA
-:107DD0007A737935D03FCA92A85F917ED13082E71D
-:107DE0004794DBBA9750BEAA607060DC3C51A7D7BD
-:107DF0007B5835AD37F17D91FCF986A84DD43F1104
-:107E0000C02366612B330181DAA36007A315F34910
-:107E100086E00B3948CF52F375136B5EE4FA511EBE
-:107E2000F44C0E994FF896D65FFFB1887CA0C6221D
-:107E300023DFC3DC2CE4DB04BF34C4A376EA2FDDEC
-:107E4000C424BCC7C11426C74FE17E309C4FBF7EFF
-:107E5000188FEB85A09FE17E855A3EFFD639FC1E28
-:107E600008DBCFE460BB8505AF67444859F59385CF
-:107E7000964D49E61039F59B0BA583AA07F0D7E884
-:107E8000FB1B64D7C07EDFAA20BB2BBDB7BD9627E6
-:107E9000A6C179488DE58410DD7FBFDD2EE5E99927
-:107EA00080CF36E6CA7D13E0E17E5F247967883AA9
-:107EB0004CF0084470F8F4E8B38BB8BE0BDA791DC7
-:107EC000E55B83BCC3F3C33CED5180EFCC139A2731
-:107ED000A0CDABC5973A557E1C480B2C718581C748
-:107EE000C1993C7FA16BFD9714EF2E47FD167039A9
-:107EF000B0E1CF21F73F4616E71C9C497EB7D03C46
-:107F0000044D2F45394BF8EBE172B6D3934D7CE726
-:107F10003CB3B790FEAFE7374646791F6BC548477D
-:107F200033F9EDEEA6BC911A8F45B2C073AE23D4DF
-:107F30001F337F5AA83C2856E274F222D4DFB5D012
-:107F4000151A271AD9B68EF8D779D49B88DFF1F5A0
-:107F500018D5BC3213DE2F11D15EF7D0F3B0CA9F13
-:107F6000DF51F5CC08E4AFF03E0A13CB011FED2C36
-:107F700040E54188F22330A55DA67CC738A650397C
-:107F800081B9A9ACE54126331F3DB5FC961416A076
-:107F9000F270D487442429999E23D00E19817A9EA9
-:107FA000A327DE4379937969142F2866CA1FB05D31
-:107FB00051F6E724F78AAE67944F0A9C64B9827938
-:107FC000250BB5322C14CB054C45CE7A5E5FA895B7
-:107FD000BDCB15E8DF99C3DB1B5FDBF8A4C746FC0C
-:107FE0004BADBF87D7F7941B97E760D964A0B2A4C5
-:107FF000B62FCE574CB3009F936731C2835FE729FA
-:1080000096E0B23B4F89082EAF2950A26625F49620
-:108010009FCF55ECC1E5AE5C655070FBA1054A0CE5
-:108020002FF33CD7F74D4A0ADABBF0B35B98C2F1A5
-:10803000107F5E35B993711CE51981E06501BEDDE5
-:108040004C7CDBC5904E816CAC9847047CC67C07A9
-:10805000D4B38966CAF73344D95207F247EAE92B09
-:1080600060627BD14F576C748FC675E9F99EE079D9
-:10807000ED6F98C703F4908B7A7E408D87046AB9C0
-:108080003F40A313EDBD7EBE8BE13D5382FCBCE9B6
-:10809000BDE3F6B77E3D1E1F51F5BDA3AABEF7BED8
-:1080A000EA97EED96FC018F389B597BEFBE79F46F4
-:1080B000F64910FFECBBDF534B4C5C7E48282F3A4F
-:1080C00023D8A270F72AFB5B5F54DE4CD72CCAA7DB
-:1080D0001826519C81697C9FF39B4EFC15F8E0B8F3
-:1080E000419AFDEAB0221C3258D2EC4C98B7D5C95F
-:1080F000487FADCF3F5882FCE77C19483058D7A95C
-:10810000DB4F23C531610FB7275A5218ADD79E26D2
-:1081100045A0BED4A0F24D0B8B291C89EB1F662411
-:1081200079AB5F7743B44FC0B8E2107F04F76FC4F8
-:10813000335F048C33C4E97052DE8A47949C582E16
-:1081400063F332A1BCAC4D949D30CEA1B65256091A
-:10815000E3564E033E4719E93C9F2256C5E371168C
-:1081600046F916ED09368A577B378E3EB002F9661E
-:10817000B2C832A0FDF886894EF47BD6DB62632953
-:10818000E6A4AEA7DEE6781DEF61782403BF4722A0
-:108190002956CC43DF76BBD189FC3CE5B949D16295
-:1081A00010FC4F79CF46607EFB139281EA9FA8CDE9
-:1081B000B5DE68C37B847E85F20CA4938A0DE6DD70
-:1081C000026D1261BCFBAB4EB68C62FDE343B4D3CF
-:1081D0001C82A7510EB3CE0F1AEAB734E9F4830715
-:1081E00066A9F1A4296C0A9EF3954F5D30A19EBB50
-:1081F000D426931F3DB749A0FC94C001472A9ED3C3
-:10820000A9FB4693DFDCDB24AA7E6B07F9AD0329CB
-:108210002C15EFD754B408A4178BDEBFD461BFE18F
-:108220009972328E337C527772B0BFEC89BB7E1864
-:10823000817CD45B6650FDDC8CC69165C59A06FBDB
-:10824000FFD82BF0FC099324E03D66FBC36204AE2B
-:10825000ABCBC4FD14CDC04FF17E6E734EC980749C
-:1082600068FA1AD61964B734C4A747E2BCBDF8ABA4
-:10827000907FFD744B36C547B637E5523E887E9CED
-:108280007BD7B30EB44F1AD65BE9D9A73ED595EA92
-:1082900080FE1FB7E6348290621F1F589584F783D3
-:1082A00056B4585844183C3EDD3A95E65B81F79841
-:1082B00071DE966233F2FD596D396684DBBDEB9554
-:1082C000E782E7692E76BF827C2FAAE539C2131BAD
-:1082D000F37B109EBFBE464945FDE274060B9B270B
-:1082E000F9EE2CAE67BC758D8BEE937C9C12BEDDD7
-:1082F000B1595CDF9F8DC43219F3D6D83B2B01CE28
-:1083000015404F75F0EA54537634E2AD89AD262618
-:10831000F59BB2520FDA73E7506F077EDE78D775A0
-:108320009B2BA15DC3DDA3DE45F67CA599EBCDECCF
-:108330000391E802F4C20AA4CFFF5A6095EA83F8D9
-:108340002FEA8F4A487E1A971BA626D16F067E6EAB
-:10835000DAFFC9DFD1DE41BC5582F0987EA6A8764F
-:10836000819AAF913485B471FA69987D9DCFCF30F1
-:10837000EEB2DC8AE7A9D7D3FBE0499F75048D8F65
-:108380007A6E3E532282D6012CC14FFE72379FB7C0
-:10839000A79D5A6F0406F36D90FEAEAFD7F6317A03
-:1083A000B38E5E9DDCAE03F80E18AF1BE30BED97AA
-:1083B000E16474CE6345E5E0272867DB45CAAB1E60
-:1083C000D7CEE3FFE78731F213F5379EC67FF1C7BB
-:1083D00038588523C0B531BE84CEB3BF7E66DF1169
-:1083E000256D42AF7D382629745D5ABB8C9E7DDD9C
-:1083F000C622B93ED881F699C5077C6F023E8F2808
-:1084000028BF33B7DD2E0DB46F3D3FC31F19D6BB58
-:10841000423D3219700DF9C3C79B05550F614923C1
-:10842000A7D0D545923FD85F09E27FC05778DE9E3E
-:108430004F20F834B79EDA7E2FF961EC0EDE8A9F6A
-:10844000D704A6C9419E07A4DD1364189A1ADC1B41
-:108450009FD2E0F8E9EE0DCF3E05AFCE3CB3E60B80
-:108460007C5A129645233CEF895F706D32B49B6055
-:10847000F625213F5DE9B3F4C13BAB862F69783F18
-:108480002FB4DE9214B47EF8D7BCEFA9CDCB504EFA
-:10849000EDB33A30351CF1CB13029F407A31D05303
-:1084A000D75DFF41F7F323A5B34B28BFBDD642F7F5
-:1084B000BAF4F07D729641CBA7A4FB1A1A3D45B4DD
-:1084C0008C66E85F3CA9DA4D2737819D0AE5C65ADC
-:1084D000B38CDF35E872142B4961C633D79A4FE06D
-:1084E000B9B2603B31BD779FDAF85D1EEE876C84D0
-:1084F000F18530FEBE8B8DF7AD4B59E904FCB21609
-:10850000BB56E1F3D4A6E5B4DF9ABDB55D6F429BDF
-:1085100086C1EE9B9D09B8EE11530474441A65BAE6
-:10852000EFE7F5FE8CE449CB347807F67C4B8731D6
-:1085300002F50F8FD740F1DB968EF8C89128A76C13
-:1085400086B071D6279C1C5EBDF2C4151DAC0F35DC
-:10855000E7737D48D853767F3AC0CB7B9CE7296A86
-:10856000FA87A4E2CD388B44FC59F2F23CB75E7D29
-:1085700088EBD5E751AF467D6972A5142C9F1AA2EE
-:10858000F977302AF31D1EBC87996763243F86E381
-:108590006505F45BD8986F561A7E27C3C1303F3704
-:1085A00016F41F19303BB18DEB3B91369B43413C98
-:1085B00056385D59E13F846764A6C2701EA34EBF62
-:1085C00030EBF40751577ED409FAC438D6A34FC80C
-:1085D000CC118D70B6DF37701E87E6CF05BD89EEF2
-:1085E000997918C01FF1D4EAA1F389064382E859AA
-:1085F00051E4F8C1BD7A3FDE67E3FE1589E24582AA
-:10860000D2487EFBADD9DCBF91CC78DC6B88C2ED63
-:10861000F909D33C5406FB81E250EC572C12F9F2D5
-:108620006E97FB39C48F34600368FFC58E67029173
-:10863000FB77D4CB59CDA5C5957E7C90FBFFBC863E
-:1086400048C7F63078FFCE1C2E97230FC1DE50BFEF
-:10865000BDDE4AF75B0AC4679A089F2619C8AFEDCA
-:108660006547248AE7AB7C36A6D8F5A693E2B2AE7E
-:1086700034847F92112C2A5076CDAA1F37E58EF4D0
-:108680004814F51F26FF9CE0E101D865C0BF6D3599
-:10869000F1B199F0FEF19A0D04573981FBC9B47B11
-:1086A000E77112BFDFDFEC3AEBC1FBBD1D73F8FDD4
-:1086B0009FC862E3EC74280FAF0D084877F7D89590
-:1086C00045A89734C93FA3F348CB920DE82F1B6A06
-:1086D00064AF5B2632F66C0CAF474189F58FD80743
-:1086E0006F0BCE27D9A1EEFB1121BCBEB2760ED7FF
-:1086F0006B3AF7012007A17DCC54FBFBA94AB2B726
-:108700007BCA0037E8FF8087DBCFDDCEA72A3D2379
-:10871000C92EE2F59EDFF2F6182F85FAA237D6545D
-:108720007AA0FDE369E1E7CD2CE2F07DFC8DEEC798
-:10873000308EF5D73A1EC7EAFF9CFDCC00BC658B96
-:108740009DA5B22B81CFAD322F0AF71D9975459C9F
-:108750008F74DA3A085E0CE479F455748F5EAFAF2B
-:108760005A918ECE49DBEBA6CA9C8F4C9E4257FB9A
-:1087700039EEE9C6BDB8DEEA4842FDB37E5577035F
-:10878000F28FFA03AB3EC47BE9E56566D25BCB8D25
-:10879000D5BF453BC87898E7BFE03726100F860065
-:1087A0003FC2FBA6B3AAF8F92D95B8BF56D8F391EE
-:1087B0002B0FFDB1C946C24B4D8F1D67513CE89749
-:1087C000DDA2E6B73371581DDEF7320E15C9EF1B77
-:1087D000550B7A2DEE2F9FE7EB2AF01FF2214DCF9C
-:1087E000B58D3786E4F59A7579BD465D1EF0D8C221
-:1087F000503E649F3C69407DEA576007E33AF703C7
-:108800001FC2A71FEC617C1E047B1D9F2F83BD8EA2
-:108810007EF057D767D2F3F5F50E7AFFE6FA69F4E2
-:108820009C911A30213E933F9AFC36CC2F905F4F9B
-:10883000C3B36D2373A1EED91C5EBF68F6C8FFF009
-:108840005C0DF5F16A7BCF3784873D65367645EE62
-:1088500078F28353F9D5C2CC15E4275AA0E4170265
-:108860009E24185C15F89D0776A785E216FAFDBCD4
-:1088700057A8E59184B7E3197EC220D48F535238AC
-:10888000B97F3FCE23025FC7DAB7D6EC40FA18545F
-:108890006C74211EA7A687C60F9E2FE47429CCE610
-:1088A000CFD437DDC307BAAFAFD1477FF5F5FB00B3
-:1088B0000506F55FEFB5B36BB1BE3E263C5D95A8EE
-:1088C00074D5EFF8366E4FB2D9406F43B1ACB70FE5
-:1088D00003945F72AE26CF4FE4F6BDE9AD3B05E9E8
-:1088E000AD2BC657877662D781559BF13B2122D2AB
-:1088F0001B9205D21BC63F347AABE1E7B114E90DF8
-:108900007E9D55FB9E2B0FE93189D397B067FF1AE7
-:10891000CAC7B88BE7D168F416A3E6CB47491D64F4
-:108920002FD28739B01FD0DE1601EFF17CF211256E
-:108930007F88450E7738BABB4C7ADBFC3DE9EDD732
-:10894000D704287FA2334D49427DC66BE27EABCB74
-:10895000A5C3ACD966FEFD8C2B7CC938CE16759CA0
-:1089600059C34E90FFAFC8EA10519E39650ED782A9
-:1089700049D9F4BDA18F0A79BF6FE62B1D445FD79B
-:108980007D4A7EDE0403A7DFF7DED8417221A5E130
-:1089900068F12CC4977522E9DBFA7DC5CD53E366F7
-:1089A000029F1734AFE4E038E221952EE575C73811
-:1089B0009F8F615206AC27C9239538312E74B5813B
-:1089C000BE2732A8F8680CCA676D3C38B824CC378B
-:1089D00041D5D73AB12F3DC24F876970083D1F2E50
-:1089E0001CC02F7B31FE51A8D2311E3DF971D57BC1
-:1089F0009297EBB7EDD78F784578BFA44F95AFF539
-:108A0000269EFF01AD25FC2EC0CB2EF79942F2FB2E
-:108A1000EAF4BFFD92DF8DFB58134D7EE52423D78A
-:108A2000F792649EB732947908CE5AFC4DD31765FD
-:108A300085E717DD50ECFE0BC2691B930FA03CB31A
-:108A400039D8228AAF813C43BCD8ED52CED2BCDFAC
-:108A5000510FCC2C56FE7B207C2ABE4EF906C7EF68
-:108A6000AF3EA7F8BF0E7D8BF45FC6FDA54BCBAA2A
-:108A700029376B08D849B8DE996A7E46FD305EAF6B
-:108A8000F957BD095AFC549987F993D12ABCC659A4
-:108A90005CAC02FA77A11CC6FB7B87037EBC176C1B
-:108AA000C17B6412FA5119F58FA9117C32F6173F78
-:108AB0007B05E345A63CFA9C0863D3B83DA0DDBF27
-:108AC00091F22FCFDF98325BF5374E6493103EA9B9
-:108AD00006F9A1E9F03EFBD18263783C931F5B115C
-:108AE00087E272EAB68652FCDED6AA9D1F6F437FEC
-:108AF000E8F4DF5A189E07E88F7E63D87CAE7F9833
-:108B00001C21BA2A29FACF4A8F11F951783CED2A53
-:108B100052F54FC4D3F8103CBD7A76783C25FDE77A
-:108B20007BE0E9CCD9A1785AA4C3D359B313BE17BB
-:108B30009ECEC775FF37C6A9609CB30B95E2D903DB
-:108B4000E065F64265E140F541F101B2FB46B169ED
-:108B5000D6E0EF1E6ACF56949703E427C46E3C49D3
-:108B6000F971F535E7284FB9CB76F26DB483FEABDA
-:108B7000C62207FBB3407F0FD1D75B40AE78C09EC3
-:108B8000FCA088E7411F5A67F1CF40BDB696DF478A
-:108B900028AFDD2660BEF790AA6AC10DFC2D5101F9
-:108BA000D311FAC728865EFF09FCBBD27484F4D9BE
-:108BB0007690C71E625FFC5E9A26FFC759AADF4007
-:108BC0003BB5FEEF46C7063C67261D407E5408F4C1
-:108BD00084F1CD6BBA41BE058DF7C6BE69E4579BE3
-:108BE000F135C8BF203F4E0E8C185CCEB32687F4FB
-:108BF0002B90D242EA67258D09A9D7E8BE33468D6E
-:108C0000AB4CDE918FF82356F03C8542392BA47D86
-:108C10007B592E7D0FE0CAE9FCFEDD9CCCE921E307
-:108C2000EBF582ABE13FA47751A707E8F504BD5E01
-:108C3000F0E3D9AA5EA0DE57D9680CE4127F623C4B
-:108C4000AF6EF8855F131DB4CB1CCFBD6567291FC0
-:108C5000A31EEC7FF4370D0DCA2F45BA98600E9015
-:108C60007F6ECB622B9DC7967D4FD1772334FF1744
-:108C7000D00DD1D1845C89F25CC7DB1FA4FE6C15DA
-:108C800097B37ABA146A5F24FD6FEB7CD81BD8EBDC
-:108C9000B9F3D2B8BCDD1F203F04BBD3CC506E7AF1
-:108CA0002503E58DFD58F0470823907E15924F2C43
-:108CB00089495ECA977C8F7F4F9131C7C66434FD66
-:108CC00015CA6B04B4EF7E43CDA345BC8D7032C78B
-:108CD0000628478DE7F41D3B899F8FCDC1CBD2D5A8
-:108CE000BCACD9DB3149AC05F36287E278D036BE43
-:108CF0008649F5E4D7F053FD30273B524FF3F3FE9E
-:108D00008995CCD50465B15A51FDCD6E35BEDE4D89
-:108D100071EF74C11189FE8D11A28BE2DED14CA2DC
-:108D2000B8F810564DCF28C1CF99C777E423570222
-:108D300000505EB09BCCF4FD8CDCA76D8CBE6FB494
-:108D4000CABC9DF2B20232F911EF39CEEFE16DB13A
-:108D5000FF90E2044D6FF3FB04F7A4783EC478E67D
-:108D6000905A81E13D56B18AC711C4D745C72CA896
-:108D7000176B5BE93B70895506F26B5D69AE3E404F
-:108D8000E770B785BE1FD705FDD1CFD56E3730A2AE
-:108D900057601E3DFE54F8E9BAC645718BAEBF0F51
-:108DA0002279C7747ECE7A37D7BFEBE3CD1CBF6C78
-:108DB00067FF807CBB313E92EEC72DBAB6FA6DE4F8
-:108DC000235BDE131D1B54FF33FAFF87E32F987FCD
-:108DD0006076A5A1DE69AE0AEFA73433D7BB93D185
-:108DE0005F7AD7CAA481F4A87EE3223683DF1C7D94
-:108DF000E9719186721E07D1D6A9EDB3D1B6465856
-:108E000026E36FDF332E52D64F5C24502D20BF1F38
-:108E10008EF513103EDC6FFD5DE322CFCCE5F2F65C
-:108E200072E322DABEE7AABF170162ABF91D14177D
-:108E3000A07333F4AE2F088E3B707DE5F89BCCDF3A
-:108E4000639C61BE5A7EFB99A39FA15FFFF0EE83F6
-:108E5000CFE073C68527CAD6005E144FB393BFF721
-:108E6000DD1FC53CCC870B8D1FCC755842FCF7F835
-:108E700083F849EB10F8BDFCE0FA62DDBA728DA10F
-:108E8000F1807C5B68FB99F1A1F5CE61A16533AB04
-:108E9000263CD5EF7743D4DD9427D7781B73F00CAD
-:108EA000F1A0F3102F5E360F3387DD97866FCC91DC
-:108EB0004674DFFE3EA77BD74BB7BFB196EC580395
-:108EC000DD9F3FB7A8E19EB764C40F33F3D0384E9F
-:108ED00005F1E8AB9F8E7F87623A92DB7323B45F24
-:108EE00096C7BF17D5279EA0FAF387D71CE8C80FEF
-:108EF0008EF70E76AF9E03FC7CB8EDAC807AC8F09E
-:108F00009A97A9FEBAC59307C4A38C9A431DF94149
-:108F1000DFF5CB30BA0CE8C7C8A87995DEF7A7F71C
-:108F200018640FCFDF2B33CB646FA9796A192ADE5F
-:108F30006494717FAB94CEE5CD1613976F1EA8167F
-:108F4000AF82FFB5E9F3DD385F3F3F8DDFEB60C0F7
-:108F500085905F69E3E9E59926076C0AD72333CA50
-:108F60001EE17245CB176CD3E7C5B91F44F808550D
-:108F70008DD46E6B9EDA6E3FD74FD96C26A15C867E
-:108F80007D86CD137D748E1A2FEA273F8D69F6E317
-:108F900082D73FC4FCBCCBB61FFB1977466A20ECD6
-:108FA0007DDB3D85DC7EEC8C08A4201FEE3485D76C
-:108FB000DF1B17CCFCE99C01F457CCAB4598F66B52
-:108FC0002F7CC7BCDA0FD57891162FD5F26B99D1CB
-:108FD0003711BFF39969FBE0068A83F693577B8FBD
-:108FE000DD11C07BEEDE8A08C776F6DDFDEB279C3F
-:108FF0009C9FEE98C3B8FF5E175FD0AFFB83393DEF
-:109000007185E373E85E58F8B842CF3E93C3FBE343
-:10901000AE98A7DDF757EF2B39B9DEA79814162EB7
-:109020000F54CB77D7BF077BE8CC9C20BF9EBB2ECD
-:1090300083FC76F5268EB71E997F4F50D31F6DA8FF
-:109040003F921ED542F5D1555C9FD4F42C498D6BCF
-:10905000E8E909E8E3AF388F60E374ABE9893DF4F0
-:10906000711DD007D0E530C6E34A06356F74989578
-:10907000A7A07F573DAAAFFDF4B5FD3BD94F753B87
-:1090800023C87EAADAFE06EA55ED35DC4FD869AF73
-:109090007E03BF7FE0794F24BDA9BFFE9A1D95389E
-:1090A0002FD48EC2B822E263A2CD27C857A01D15C7
-:1090B00030B9617DE56847D9306FD53DAC28A1AFA7
-:1090C0003DD575F79F29DF15ECCD94A27F047FD0A5
-:1090D000F9970EAA791007469E25BF8958C3ED3D22
-:1090E000B186C7438D653C6E6154B81FC50CF2084C
-:1090F0005D819A1F658B23D48FD295C2FD2889F993
-:10910000D57ED4034DD32C9242F291FB55B4BCF6DC
-:109110007116DF1B781FA33ECBC8300F1D1455B24C
-:10912000032D6A7C83957179A5F94DF479D3369D29
-:109130009F44EF47C92F0AF59B3C2EC8F74E87790D
-:109140009EDF5CF016A2ED7F6E5D11857E93177D2C
-:109150000D7354BFC9A3B89E7D1F72BF49D73E6E21
-:1091600017B95181B92A1CFEF58953911F64DDE1BD
-:10917000F5142FD3FC5089552A3CD4B80FC217E1FF
-:10918000293A393C6374F0F40ED3E2422A3C133896
-:109190007CCB8B5CE47792109E522F3C353F95F749
-:1091A00070077D5FDBB2CE227B089E9F91BD6A4235
-:1091B0007822FCBFA71FEA9622D52E55E139F1D1BE
-:1091C000EC87F03BC1931E2B3D86CF29DB6E8BBB1A
-:1091D000019ED3763E548A4FF63A8F13FC752EE7E4
-:1091E0005798D91D4C8F3715CA21DF83D7E0A9E1E5
-:1091F00061AFFF8E913FB65CE2FEFC72150F33103B
-:109200006EC1FE3C4728DCB6A8F992C6FC6A0FDAAC
-:10921000BBC37570D3F0B01EE186FC2EC62C7BC894
-:109220007F572BA03DD41F1E0E6FBB3C3C7C588744
-:10923000873FDB9C7D2FC2EB85ADA56FE1F3E7BED9
-:10924000DBA2105E7B773C34A71FB82587F07974CA
-:109250007227F485DB8962F70EE40F331C3E23F19D
-:1092600059C037B47BB7374DB486C66734FEE8B40F
-:1092700086931F17F72FADA1BCC2FAB235C41FBB2E
-:109280007AF863B71DF3102F953FE6CDE5F7FACBDB
-:109290006BBE7A6506C035AFE604D19F11E88FCE6C
-:1092A000ADF68441CDC76011202F12CB981FE3C7C4
-:1092B0004398D51725507E02F14D2FE639E3074A32
-:1092C000F57E0AE9D5BF09441C4C3024011FC7DCD8
-:1092D000A92B490EBE5934B92F9F6D2F3390FF67CC
-:1092E000BBEA1F2C5BE03A8CEDB4F8D66E97F276B1
-:1092F000D1F7F36B1F2F0AF21776C6B01EFF1A7E46
-:109300001F3CAF669B807928436A6F25F99058A669
-:1093100030940FB7CEE67462CC9768BF7DFD6DDDEB
-:1093200079682774E28DF62CC2838F110F3A6B9EF9
-:10933000243CB87215F78F74D69C8B0B8F073511B0
-:10934000DFCDCFB83D444E7A6BF8774C3AEDCAEB9F
-:1093500019978107CB543CD0E424CA1BC427635916
-:10936000E051F4630F017C88484379C9F9B108F2F0
-:109370002A0AF623F6E37FD4E8A10BD6661984F710
-:1093800084F5F900D5B4EE7365B9FEA903ACEF928C
-:10939000F300D4B864BD1A975C5AC3F3573BD77D2A
-:1093A0005580EB3D5706F601C0657B9983E1F9CD09
-:1093B00002C52A600B9EA74FDEEAB0B909BD71480D
-:1093C0002D9E7FA2D8958AEF67004E25C5625EAFBD
-:1093D0001AEF19A67E075A87FF80E7A3E6925F4E31
-:1093E00022B9A1F9D119EA8D76C46F6534D64F3010
-:1093F00057274B84DFEEF1586EDF7727E52FF4FA1D
-:1094000007793EDCF7F66F459B29BF52F36F79ED84
-:10941000DCBF55C10205685F531C01F976AB85BE00
-:10942000D75029C866F2AF95B895B9A4F7B8281FE8
-:10943000D6BDC02A911F6CD5AE64E417E58D22C954
-:10944000EBFEEC92BE7476997C46A5BBEFC067AE8E
-:109450009F7B697C6631EE2F88CFDC30F77BF099FB
-:10946000F78B42F90BEA9D75304F9E4A4F3DFB56F4
-:10947000E3F818BF8AC80AD247D5FDEAE9A88F5E8B
-:10948000FA7F1F5DDD83700D43571BF1FD65D055DD
-:10949000EB45E8EA413CCF20BA6AFF17A5ABA72FFE
-:1094A00085AE94B92C344F3A8E7FE7795C9C81E786
-:1094B00059FE1FCE931EA3DAD9FA3C69C6AAA95C4D
-:1094C000046743E7A396E74D6232C6992CDB5EDE64
-:1094D0003456E6E305FB3B99CECFC9747E4DBD7E85
-:1094E00017C60F1AE2F73CFCD4EF0E8F855F9F7E04
-:1094F000F6BF49AF7D7BA640F7C9E78DFE6A3FEA1C
-:10950000A0C51B97A9F30CECF7FC67FB39F127D832
-:10951000AFAADF5763D4DDEABD81CBF37332C7ADA9
-:10952000F47DF3F66AE640B85FCCEFD95ECBF3A6E4
-:10953000B5BC66D74B950F2F9CC4F3E9D0EFA9F7C4
-:10954000776AF9CAF5B665A4E79F54ACDC1FABF3A4
-:10955000772E8B936FA17B8C7DFD9D91F3FE01FE99
-:10956000CEDBE7C8DC4FA3F37B96CE52E2E70D904B
-:10957000CFD019E360C8EFF26C3E01E3B5EC4236A0
-:10958000F97586D802F47DADF29A1CD2034716BB5A
-:10959000D3701C637EF7E72F4EA27C03070EA5E76E
-:1095A000CBA067A6CFA33CB67F8E9FE09FE5E7FBED
-:1095B00068CEE5DD9FFF08E13D79807BF472E0B184
-:1095C0002878FF789D9DBEAFF5FC6C59CD3FE84EE5
-:1095D0006981FA77EF3A7310FD13BE3603C3FB6D52
-:1095E00097EA3F6AB8885E6CD6D9475B7AF462DF47
-:1095F0001B5383F4E286F5CE7DA7C38CA3E9C5BBDC
-:1096000074FEA3721BD78BCB6DDD26B40FCAE3BFEC
-:109610007E05F34E8D55AC03E5E210A59AF4E144C6
-:1096200089513EF1FF8FCBB37F685CFEFE79A1715B
-:10963000F9096A3E0AF278FCFE4F97E6479DC6F5A7
-:10964000868D466EAF78157817268EAE8FCB0FBFFE
-:10965000B087E2F2ED7BAD748F6FCBBE663E5E0EDF
-:109660009330CF3C99A9FA5A11F797EAF58FC74D75
-:109670008A356D12E2BB81EE13E23D41F28BECB50F
-:109680006E437FD3783BCFE7CE7D67F14ECAE7D6F6
-:10969000F443D043492F2E0BD07799CA250723BE18
-:1096A000133FCD4FF1F15A81F06BD93C4E6F4BF324
-:1096B0007DA41F0E2993047E4FCCC3EDF8541E7772
-:1096C0008E44FC82A662268FFB4A474407C69DEF64
-:1096D000C3A6D3F1FE2AE3DFAB986EA0BF43D12E21
-:1096E0007427215F6E1594647C82CE44F71E9F8D93
-:1096F0005106E3DF93AA4F31D0DF933A54D09884D8
-:10970000EB6BAA6B4D42BDF015D52FDE5AF009E583
-:109710003F98C6833E9846CFB07F77F4C1F982FA6E
-:1097200077043B92E87B08ACE543C2AB4C33E37F64
-:10973000E7C7E15F8EF474DA46FAC203828FDF1363
-:10974000B25BE93E5ECB18737225ACA7D96E266D6D
-:10975000C23B66E6913478DF9C2045631CC09B9633
-:109760002EA1FFC81BD3F83AFA419AD3D219E6FBCF
-:1097700037954DA1F879D3056030D0B37EECA8774A
-:1097800027C3FB8D4280BE1BE4996E60984FD8368C
-:10979000666672F0BD4C51D2CB4907C9055136D02F
-:1097A0003D3F518D678B7DE2D9A1F1E949EABE6564
-:1097B000D6B288EE81C69B25DC6FF998920FE99EA0
-:1097C0005BBC99F282CA4D8C7FF7630CA373D1C343
-:1097D000AF7E7D685CC1680B5DDF460C4C531EF6A6
-:1097E0009695881F0D0853CAE3BE7725F2A5869E7D
-:1097F000FA465E8EE0E5AFE7D5AD44392833FEF793
-:10980000491A3279DE65794209F1E1725320EC7729
-:109810007E2FB61E99F914753CF63F39DEC631E647
-:1098200045BEF1171FAFF75C407DFE0EE36AEDF415
-:10983000E3EAFBFD4FB5EF6F9F89F3B5BC7A46793C
-:1098400010A422AAF7D9504F36AAFCB03E778ACF8F
-:109850002F233FF070BA883184CDB3ED9F3E82C68E
-:10986000E749BDC46F697CFCF64C4DA11FF923BECE
-:109870002F49EAA59B9EFC0B753CA87A15E5C3D63B
-:10988000F942CFBAA5C1BDE3FEA62CDB8F761CD86A
-:1098900019729C230CFDA9791AD43E8DF26D283FD4
-:1098A000868D65C447B4F646755E7DDEC66E152F9F
-:1098B0002E376FE334EE6112C91AB207BDBF6DA136
-:1098C000FC25861FA342FF5C9644F7E1EED5DAD96A
-:1098D00019D971DA3944B0DE1FB4D392B482CC46C0
-:1098E000E23DC38DA327D0DFA77C74F7833FC1FC83
-:1098F0008DCDCF6CF8233E23474EB87FDA24BC478A
-:109900006F70A8B9D4643F69F934B67FDBFC35EADF
-:10991000A9FA7C95C6F12B5AE8F882CF311DFF2EAB
-:10992000B2A0A07FDF62B36DA7EFF95805B21FC4E4
-:10993000871269FD4995A1E7DE2E281FE077FF3CDD
-:10994000F709C447231CA1F9377A7BA3A9E75C4335
-:10995000ED940784F071EFD7E6733923EAEE89B608
-:109960009A64FA8E6DEB46112399AC759D85F8D9F2
-:10997000EFE72F5989DF19BF03191ED4B75F63A61C
-:10998000BF6BD56E97AE5B8465559E6971E607AE79
-:1099900018E50BFEFB47AFA29C85F95AAE31933C0C
-:1099A00060C66ECA63D7DF0FEF6367E9F0EE6278D7
-:1099B00076C3FC5835DFC04772A5C7BE1F6DE0F700
-:1099C000A0471BFE25EE41BBE787B7EFBFEF3D6821
-:1099D0008AEB25F4A55F2DFF6F4354EA62DC7FC359
-:1099E0002C337D2FEE72EDDED6752B495E786E65D9
-:1099F0008E0C47DFBC30D74B23097FC42691FC7106
-:109A0000BDF8C5EDDA5FCC33F5FC9D166B109FD425
-:109A1000F2821E52EF153FE46AA4FC19AF93DF2BCC
-:109A20008E685949F6722BE8619857A5D9C727A7C0
-:109A3000A54F1128EF47F1E0773D4EE6AA79415254
-:109A4000687E0B53F3FBB4F95AA7A5D37C5EB4C769
-:109A500007C003A353CDDFD38DD7C3AFD1EE0EB272
-:109A600097C1EEFEDB7CD8DFFD36073AE3A0FE654A
-:109A7000AA6793622FE91E6817FE0AED7E50AAD0EE
-:109A80009F48F9DF0A551CCD00800000000000004F
-:109A90001F8B080000000000000BAD3B0D7054D57B
-:109AA000B9DFFDD9BB1BB29BDC0D9BB8C1106F02A7
-:109AB000D1203F5E304913C572F303244AEDCD0F28
-:109AC00009BE01DEA26871ECD4ADB5BED03ACDC5F9
-:109AD0006C4888084BC4065F1D8D54FBDAB1D5D4A1
-:109AE000D7D7878EED5B90E7F84FDADAAA333E1BC3
-:109AF000D1F2FA3A9D37E96BB1E98C2DEFFBBE73D9
-:109B00002FD95D36809438E3E1DC73CE77CEF9FE51
-:109B10007FCEB655D53AF91180E350080AB61F85B5
-:109B2000CC35610078DF6706CC2500A7E86F1540CB
-:109B30007FD20729EC836A0260BB0E263775E07C72
-:109B400058E88327B15122CBF9FBD690ADCA4180AA
-:109B500012BB12A078667D1BEC57EFC2F1AB7C63A1
-:109B60002D500390D80ABA834BB684922AF5570336
-:109B700038801BAF351A031508B7F505DA086055AC
-:109B800078240232C0B2E70F94C5687FC7FA7975AE
-:109B90001DD054FE5BEC9FB09B717DFF1B8A791F2B
-:109BA0007FD10FC770BD1A5560182148CFAC8C4EBD
-:109BB000E279D4E089F7A000E0BA29809680587B4A
-:109BC0008AE04F07A0A57AA6DF8890D3FBCD81D28B
-:109BD0008CF9ABF58A8C71052C3325E1B9A38B3256
-:109BE000E6856A6B743A6F9BB13CE3FB0DD50D19AA
-:109BF000EBA1453D3E89FD95F8DFA94A8227FA3C55
-:109C00005E01105C82FDB4F52AA4F571FC1A3B14C8
-:109C100039B1183B9F81CF9C52882EE60620BA802E
-:109C20006C3E897829793E30998FF803CB32222512
-:109C3000880F1A3200BE6CE3E25AEC074FC884FF6B
-:109C400047F271EF52C4B33E29139D401F97F83B72
-:109C5000C0F830223BAA5A3C0FA2A02770DEA5E034
-:109C6000483AF6435148527F3E24793EFE251F6C08
-:109C700040B60888F5051D60EEC5F1FC258E24610F
-:109C8000BFA8154C05E105CD0989CEA9E37A05F9F0
-:109C9000A01452DC2F6B85897E866FDD47EB4B7BF2
-:109CA000411F2825B00E8F8F6D0487CEF33898E0C2
-:109CB00057081F36C002000DE2DC5E064611221175
-:109CC000BE0DE60AEA57C1242115A93A2651FF1212
-:109CD00018D7A90F90027B2936936AF84480A70011
-:109CE000F1A9C7AFD92DED74C2A30B4E1EBFD1DAB7
-:109CF00066237F77DF545B180BCEBE4EED7D71BCC3
-:109D0000E5EA99FEB76D83E542ED5DCBF2A2F6BEC2
-:109D1000C4E3476DFB2B36D26319C20FACF8F4F8DD
-:109D20005FA6097C2624301D9C9F78EEFAE8161C5D
-:109D3000779E0B985540F8457C125FD407A65E6964
-:109D400010EB891E11A407E1BB6809488483F9441C
-:109D500007FCAE211D76311D930CB73C0EE60E7745
-:109D60005FEA97221D882E63A0CF21BC2AF14F47BE
-:109D700007FE4338971C0A3C3E2C1176912E0B2E81
-:109D80000A5DBE752174C9A607DC3B17A0E16CFB18
-:109D90003A4CC76F49A93C69019105E983F7919055
-:109DA0003E84CF28087A680026E12917FEA99F572C
-:109DB00003C67DDC17F3899E4EC30CFF1722FF8B71
-:109DC000BE90AF30D241F4059D22242FD88FDAE324
-:109DD000BCBE682BD80F94123D2C469E0F62DCFA55
-:109DE000614AA2B65232995E0B145BA67EBE9412F3
-:109DF00048464A923E28009DE9330FE2DC467C53F8
-:109E0000874F91BE0ECA634E05B5CF36D23EFDEBED
-:109E100050C390CA0F8D34325FDE0E7A15F25DB9F1
-:109E200066B1FE2EBF52351D231D5FF7317C30AC6D
-:109E300003646FCAE5100CD7CCEC9BF099D124D207
-:109E4000EB58E8C491187E9F53AA80DF9CC1F37140
-:109E50009FB81FC1542E257910F211ADC7B384CF1E
-:109E6000D46F5155F06D701BE20FF1B19906104F90
-:109E7000D2D0BFF3F7479A85BEFBAE1DFB88F885AD
-:109E8000F413E3CF029DF4936E02EB4DD9707E4341
-:109E900076F1E490DF203E85E4A815C07DB6B8FBDE
-:109EA0006C19F27F2015A4DD33E18794A79F2B69FD
-:109EB000BD5DC8FC6C4A10A83BFF7517CAFFD05B9C
-:109EC0004CCC764EBE6D7C6665E1E492D9E76924A0
-:109ED0001F73D3D7093A6911E4A7208DBFC4E3E704
-:109EE00082E3EB3D9C21671E1C5FD46638BEDEA377
-:109EF00042DEC86E213D6F43BB358CF8FE474BD721
-:109F0000045F4EFD27D9F39BE30526D9734611CE96
-:109F1000BB25298D0D233FDE0A718DF85482850EF5
-:109F2000D16FB32399C338A572D7D602F617A045CF
-:109F300027FC48A96B95538B3F051E5D3C6D4EFD7C
-:109F40008FCF08115E43F0A1375E3933FEC78D0B0A
-:109F50008ED51AA4B483D544DF7C97BEA8899CD73C
-:109F6000F09CBE4F0A615847EECFFFC61BABF07C9A
-:109F700003BF504CA582E6696021BC3920EC783ED5
-:109F8000C9E902E297F1D41DC46FBD853ADDD79BC4
-:109F900007EE3C076216DD331FF500C195F37733FA
-:109FA0007FE6176886C2CC8F1A27FD1E01E4BB121C
-:109FB0004635FF156BA914C9577153C0DC91095F71
-:109FC0003A45EB112694B8F790CEDC7F29F5033C97
-:109FD000D478CADDCF0AA4ED97D5F745D3FA20C6C9
-:109FE0009DF4F9A606A934BC9E961757CEBC7307FC
-:109FF000835AA6BC64ADF3E8B1C427F8635E198C3C
-:10A00000EDC0F30E0D1D6C247D335A0C861F8706A0
-:10A01000377F47029CDF44BA98EC4F0B8CF925DA66
-:10A02000C718AEC6BEAF2CC8FC73C96FEDD41D08EF
-:10A03000E70BF57EDD409CCCFBBDA537E2F86D65F6
-:10A0400001D342FA26DCF94E0BFA5962FB5F915FAD
-:10A050007AAB7B5EA605CAE1BDEDC2CF52C35D3BC4
-:10A060005FC3F9FBE629A0905E53369A649F6E5554
-:10A0700001E616617FBF8FFD3EF4EFF83EFE964C81
-:10A08000BFEFB6477C197D5F969FF8F576F403899C
-:10A0900068AE1F38D00EBC2F9D67EE8ABF1F3E04EE
-:10A0A00023AC3F97AA13B29EC3AE7AF8979E0932AB
-:10A0B000FE7F528C78A575605B7762DF8F78247E97
-:10A0C00045455D508B78B2E89F06F9C93FBA8BE6EB
-:10A0D000FB4F22FFD27C25D87227D1E152174F20A7
-:10A0E000CE65E17F74EE6C7FD89FE50F679FDBA3A1
-:10A0F000C3631E7EEAA08EF083FE39FB07DEBDB28D
-:10A10000EFF3421F6A0EE4A59FF605B84DF5E9DCB2
-:10A110001EE98B727BB4CF801674AC5EEAABE6F6B8
-:10A12000E53E93BFBFDA57CFAD878FD9F44DA8581E
-:10A13000667F61DFBDF2180993BA447FE50AE2DB6E
-:10A14000B714561F3A1879EA02B643A0E2BCCB5ABC
-:10A15000D5318BEEE2C63F97B87CB6D83F75D88F25
-:10A16000EB92A560DE470BD16E6FAD99897FAE9BF8
-:10A170009267E40428DE9933636780E29DB919FD94
-:10A18000E6C0A519F357EB0B32C63DFA3ED628E4DC
-:10A19000666D7471C6FC7D2D4DA92F905FDFE0D7F1
-:10A1A000159DE29FAB33C66FA8BE36031E28EB4C4D
-:10A1B000D2D3451BD3E8C6F7CFA4ABB6EDEC719074
-:10A1C00047E7F7DA33E3A1D9E89BCDB71E5E8B4EA4
-:10A1D000E355C495098A2B0DBAF712690B82DA731D
-:10A1E000DA2FB1C00ECDECABD6637CB9ECE2C797E9
-:10A1F00005145F56E48A2F3FD2897FCF195FB66678
-:10A20000C6970559783B577CA97564EA95F3C5E76D
-:10A21000E6F2F81BB514EFBDAEB01FA8B4C6D9FE68
-:10A22000CD9D50CCB508B7D8F5C74224F3386F732D
-:10A23000ADC6FEE53E988C92DDDF2B215691FFE7FF
-:10A240002E314B49DF3C1DB64A6EA238BF4D360F4A
-:10A25000E292171BBF1925BF63D78EC7A36894600E
-:10A260005187CCFB261B4F6C22B9520DF4E3246EB0
-:10A27000ADB11CFE8937FFAB033EB6037B37696384
-:10A2800012CEDF1BD2BB3750DFDD0711C2F676B42A
-:10A29000F6F231F2FFAEEC3004BF801325FA3FB87E
-:10A2A000A9AE948D948AFDA534DD643B3E1C32AD8D
-:10A2B0005B887F7E1304073F3D20E90512D98B4D53
-:10A2C000B2FE24DE73B475C5BB5BB1BF2BA8992465
-:10A2D000F089705D29F197B219DD1EEC8FB48EBC48
-:10A2E0004CEBD52A99FB894D971F23F779B4586F0A
-:10A2F000ABA4386F7525611A94439FF4515E231106
-:10A300003E11A5F5FDD788F5B3D147D1D3EC39700F
-:10A31000FE82CFAB2C94531AC2515E38F15782A7FC
-:10A32000A4DB71D6E3997EC57058A32001D6FF7CCB
-:10A33000E1F71C9554B965111D4751E6094F9B374C
-:10A340007514523CB5D937599CCB5E0CA07E4D5D3F
-:10A3500091E66F4632FD846CF8FC5747F8C53F59CB
-:10A36000748D123774C1BFC48D6BC652843748B622
-:10A370005652DC1B147679363CA8C14C3C78F01957
-:10A380001EFE4FE9CDB3F2D2F080D74A91BF73479A
-:10A3900087C4F4FF22F141AD3806C51DDEB9D4569D
-:10A3A00099D779FA01F978C338F1878BF7289A0C95
-:10A3B0009243EF1C5F75E1DD739AAF706A49DA3939
-:10A3C000566A2E3C93E3E2AB342157F02BC57CD286
-:10A3D000C84127D77FE3F51533E3AA7BFE2B0E6830
-:10A3E00019FA7788F6C77BBCBDB1F3ACF1F2A2B124
-:10A3F000CC75DFE9003EEF958A75E404F95257C841
-:10A40000634F22A8C557C82CCF27D1FF22BB361BCC
-:10A410003C8FFE2C6225CC5D407ED9CE4807F3F9F7
-:10A420006CEBB4B109AB6219ED0BF171E4AF45D13E
-:10A43000CC7379F3BE73FA5E5F8139741E74C8C938
-:10A440001EF9C75216E9693FC291B0AD7EFC6EFDA0
-:10A450006CF7F6431A7CC4E74792D0574E18F8BE03
-:10A460008977C7587EE0D0D48724DF894525C63058
-:10A47000CB0B4417D6913F22EEE5CBA2D3709E8042
-:10A4800033B25CF8A9236EDF592AE042BA9CE2FAA3
-:10A490003C37AFF242C702C6BB467A8688AC5AE563
-:10A4A000C41741F5878E8EFC3027B80FC2D8FA2327
-:10A4B0005B1C6A57951B7BEAF15C238B64B66323B4
-:10A4C000A1D8E303A487160573CAC76BAE5E1C222E
-:10A4D000BEE5F8092C99E44EF284046232D26B9402
-:10A4E000391FE0FD8EB0C867E9C9FA9B118F6FBBB9
-:10A4F0007C81F7E1F5D9F0DF3D13FE13C4AF0917F6
-:10A5000038C1D982707EEDCA0590412971E33EDCE5
-:10A510002F6024EBC95F98ECD0C5B8BADCA4FB8FE0
-:10A520008473EF37E9EE67C97189E65DB251AC8794
-:10A530008058B7579ADA705CD093E589F6A7F17C1A
-:10A5400033533F64C3CDABCED4575A59E6FCFF75A5
-:10A55000F92F3B1E7A40CA7DCEC24E71DF55E5C051
-:10A56000F688F8E2BE1C7C912DEF1AE53F11EEDF74
-:10A57000880EBC9FD03B4175A229BF86EC3B98FD5D
-:10A580008CD8C37CDFFBF26FE43879E00691E7D02A
-:10A5900054A1B7CB362018B4C7F64F5A1CEA2B7714
-:10A5A00083EE0F9F89874F1BEF91BD71D2D6873BFA
-:10A5B00081CFA9A4C781788FA4CFB891F64DEE5270
-:10A5C00080FC80E476FF865C76BBB8C3E7E95D8EED
-:10A5D0006B55972FC0AC0019D71F784BE1BCC081D9
-:10A5E000FA9D1C17276CCD902A284FF1086CC7F1F3
-:10A5F0003F5A32FBADBD87EEFDF5ABB8EC784B654D
-:10A600009D24B31CC1AD38FF38C6C5E43793FC6543
-:10A61000E46310B181BA99FD922D95BC5F02F79366
-:10A62000CEA2E7541BE3D66567C23B6D8FB3F2231E
-:10A630000325B1DA4EBCDFBEA0A8B3285E7EA42BF2
-:10A64000725E791D0392A95ED22B1B81F1106A1BE9
-:10A6500081ED944F888A38E348AD5FF0D776C98D95
-:10A66000CFA0053C3D857FEB361A0FCF25FBF28E40
-:10A670001FAA70BCE9A9D755EA8F94CA75143F5F29
-:10A68000A54DDE7F158DD7F9587F3422255319FC4F
-:10A6900091F2CB513E8FE6B68A685312B5CD81FC5C
-:10A6A0000C7DBD5ACF8C3FF64C1F510A893F753047
-:10A6B00025C4F39E46D32A24DD634EF6D3F73DAB83
-:10A6C0000D73D8207F38334ED9D3A6097D5A21EC9B
-:10A6D000CEC861E361F2AF067BF3D8FF7CA04C16D5
-:10A6E000F75E0863C40F6D46665C33325EB96B215A
-:10A6F000C959D2C7F9F2EF8F8BF95B772C1FA3B83A
-:10A700005477FDD5ADA54DEC87C280987743F5E22F
-:10A71000ACFB4FE8C417C9ED3E20FC0F96DD3C446E
-:10A72000F9D00F12BEAB495C5EED3432E2C22D03AC
-:10A73000B7729D6840839BE8FC7B3669CCFF7B8ABF
-:10A740003F38700BE9E9E2398CE7D14D5A692C4D5D
-:10A750001EFED6E9673918DD24FC8B621962E339E5
-:10A76000C6FFD629F4D0E76E07BE4F01DA65033F76
-:10A77000196A3CE5277C9401FC335D27FAD1437CC0
-:10A78000FF5619AAF08823918DECBF65F359B0AB41
-:10A790008AE19DB68FF572061E7D7E3BCE79EE1B5B
-:10A7A000C0207DD5D28A7D8AEF376A40FCE68FDEF5
-:10A7B000CDF72CC27E1EF603AD4947C57E6061EC25
-:10A7C0006AF25B5FDCDE334479167F44D689DFFCB6
-:10A7D0001B6FB33B697E8D0FF2707C000C294AE73A
-:10A7E0007424207D6D40AC95FCF591A8AC53DE66D9
-:10A7F0005D62FD36DA7F5D640E109D37B7C9BCDF40
-:10A80000494BE3A45531391A94FF2A09B2DD7DDFA3
-:10A81000177FB807E7BF8FF47260E65E873A2BF9BF
-:10A820009E794666FC1C8024DBE195D6C446DA6737
-:10A8300065BD46150D38D270E200F9EBA3B57ED3A5
-:10A840008FE71A6D9018DF1FD7FAC6F0A8F0536D86
-:10A8500042A17D7FFA31F246452EF93DBBDC64CF43
-:10A86000DF53DF11207ED809135D841F675A66FB12
-:10A87000953DAFA14BD07F27E285F0ECE079AB2886
-:10A880002E9A42B942E8E169FBBBB760FBA54E9541
-:10A89000E77DB55476A82E34D8A6B19C0C866243C9
-:10A8A00015D4477EE7782812637E1E298DB01C7A66
-:10A8B000FB8C34745713BFBC519BC77EFB973B4F37
-:10A8C000DCEE2C44FDA1FCFE5F9FA1F8A94C637A4D
-:10A8D0000EFAECD4ABC4D76DC25F3C3AFF1E96BBF8
-:10A8E000818D3703E10D9CF83B54B71AA86960F8D5
-:10A8F0005EBE6164BEC8270D44EE7228BF91AA17E0
-:10A90000F905ABF820E7F3BCBC52A3ABC716FBE3D9
-:10A91000AF54D1BADB55511756CA12A40FFC945745
-:10A92000A2756A66BEEBBAA9CC38785E561C9C9DAF
-:10A930006782C0C4C24EB4A7BFEBCCCC2BD1155894
-:10A940008E6BFC1C2F8ED68B3828E98B97EA4BCE6A
-:10A9500094E3375D3F78A22F801C00F0F33E9DFB0F
-:10A9600005D61F76CC45506FF545F9FBE7573E2ECF
-:10A97000A5AFDB53B33E60B0DE988C12DC6C7D91EA
-:10A98000CD07BD9D7398BE18A701D177CF14307E37
-:10A99000430D2B52C4A727FF041C877EB6652208EF
-:10A9A0009567AE4FD139FD94FF12E73C4AE7F45367
-:10A9B000FE4B9CEFE53E83DB57FBAAB95DD3052236
-:10A9C000CFEFE983CB501F20DE5ACA449FE49FECAF
-:10A9D0007051E4669BF8CB1F557592EF40593225B4
-:10A9E000A5E983D150FC5DB2CB83C541E6BFEC73D2
-:10A9F0005DDE25BB762F7E13C1DD837009EF2F6EE0
-:10AA0000FFEF8716D03E6F29CC57451BBBB7B1DE91
-:10AA100041BD90C7FE86D087C9E220E71D46B757E3
-:10AA20004951EC6FDE211CDD73CA3DEE3386EB8E9F
-:10AA3000A0BEA6FE20CA39DD67B0E1833B689F8FC8
-:10AA4000FF32872A7C48EF5FB1DCBF8101C8DC8B15
-:10AA500028F79E9CBDFE8B43DF233933C0EE39249B
-:10AA6000EECF7A70343491A4FB0FFE52815C78BB38
-:10AA700050BA82757E7EC8983A75F8542447DDD066
-:10AA80001275C3FEF11F71DF59075085FD477D56D2
-:10AA900080F8E0D11DF259EB868FEE387BDD706CCB
-:10AAA000BF0C7E7DE61C97C224E7592984A73AE0B3
-:10AAB000000D617B4357EC962EF623455DD168A0CF
-:10AAC0009C03F5F539E43F1FB5ADAD3C1E2962BBD3
-:10AAD0001F55C75364D7A3542F37E8FD82C3754F62
-:10AAE000CACFD2FB85ECFBF7FB269BF87E3885EAC4
-:10AAF00095D9F54929F86351DF5F20EA905E7D72B0
-:10AB0000993679F07EC2D34D01C643FF73D7BC435B
-:10AB1000F52FAF8E1F75EBC0FA36D077887BDCDB64
-:10AB20004571D00BA21E0AD7E03D96D3269395ED32
-:10AB30004BB9BEB983EE71AEF39F6FDD709DABDF95
-:10AB400090B9C7489E7FEDE2D39BF74D92C75AF26A
-:10AB50001345DE1A0A34D6F34D4F0541217F39A43F
-:10AB60001D2439D90293AB499EFAC3C26F4BECF353
-:10AB7000B1DF36DA65F03EC59AC5EF178ABF966732
-:10AB8000EE403089C37A01E591AEE9B446BBF81CCA
-:10AB9000C9AE0E3AC790C2FAEEFDAAD5FC8EA94DF9
-:10ABA0002A64795475AB3C5D5F1EEACAFD1E695587
-:10ABB000F95407EF1F9281E2AD449EF9B241F8FECD
-:10ABC00089CA70DB40BC5782ADBA3484F7EC0F1EE3
-:10ABD00067FAACAAF22F27FD74C8B5AF8950EEB85A
-:10ABE000EE59171FFFD01EFB21D1E17A986A26FD8E
-:10ABF00086A26D3AFCAE45C46B87485F8A78F75EE3
-:10AC0000B96E26AFF5922F7688EE6B7D5FF813FE56
-:10AC1000A8F0EB3152E37CD007EDD67304771DF139
-:10AC2000790D2B2A7872790E3977CF714797F51FF6
-:10AC300004EF98BBDF32DDE2BAEB3290CDFE485A2A
-:10AC40005DDD38BFBABAA4FF58D4D3AF157C0C2F42
-:10AC500038820F9B40277942FE3B46E7F3DE972C74
-:10AC60007B7E5B05D75D2EB0BE9DDF61BD4DF04E96
-:10AC7000D9F6BBD4BEBFBD0718DE79BED758551E66
-:10AC80008FDA48A7C13CE1373FDD686EB0D3F23FB1
-:10AC900073D60B7B3267BD88C717233B4D88776F10
-:10ACA0006CC72F87FA00D12B1BFE401F8C531D68E9
-:10ACB000B6FDB55D7705284FDC5FD614A0F768892F
-:10ACC000605321F507CBAC28ED3FD0D7FADC4755D0
-:10ACD000C44782EF9DF9221F9144FDECA4E5494F42
-:10ACE00075297CAEE63248513EDD1F147E911FE38C
-:10ACF000456329F9CDF56CCFF1FB38A50EFCEB0DC2
-:10AD0000116F5B265841728340227CA18E3CBD9E10
-:10AD10004C5E73591CE85CB3C1515A703DC5A365C4
-:10AD20003AFB2157AED7196ED89267E278387F7C0C
-:10AD3000ED3B07BE8ACE812F6F9E2777D978AA5C1C
-:10AD4000AFF0F95E0CDFC3F7824F9A59CEFCA8F042
-:10AD5000A89E5FBD5EE8192568412CC4E1BF44F898
-:10AD600049D0039B2533F8455F91F1ABE8715EE76D
-:10AD70002F3321B694F0A14B848FECFB2F7BFEBBCD
-:10AD80002D84B757B608BDBA4A75F5471CEF82FC4B
-:10AD9000B9D3D56FE0DAA5B63C6177D6C1CF8222B0
-:10ADA000AF2DF87419BAE381A233F5ABD73EEDE6C7
-:10ADB00095B3BFFF6E7D9EF0878C71D6EFFDAD021F
-:10ADC0007E2824FCD083432BD87F58535A35275DE7
-:10ADD0003F5EEC3A61765DF05C75C019BEB10274FD
-:10ADE000CE3FEA7739EDC6ECFC713FF18F8FE42658
-:10ADF000C0ED19E3E576D424B99A6F398074DB1974
-:10AE00008E47897F060E6F7F87EA24EAEB8A49FE28
-:10AE1000A6AADA40F3D614C7593ED696594075A56E
-:10AE2000FBFBAC1FA6C31D6E8F6D5B4FEF84F471EF
-:10AE30008BE00421E5903DBA7EAE15B773D0E16E8C
-:10AE4000577F7CD06E7F693DF2E12AD29D2B007E38
-:10AE5000695B7752FF7CF5D599F2D41A20BD7FE16A
-:10AE6000F2D411A0FB0D96D9FC4E6BF0670A79580D
-:10AE7000A7E70DBAF23438FF1E88A5C9D5EEF559FB
-:10AE80007A27E2EA9D88C57231E2EA1955B7593E40
-:10AE90007C244F4BD2F44CC4D33316CBA31AF1E429
-:10AEA000C9953F92A720BD0F9E6A263F6500C43B0F
-:10AEB000C66CF9FA7E7BEC61A2C355C5FFD7596118
-:10AEC000CCBCFF340C214F83652EBFCF7F96F9FF9A
-:10AED00024F23F3D16EE0F5666F0BBD7AE9C5620CF
-:10AEE00085A4B86E5AE2F6B3D3F9DCAE9ACEE3D6B7
-:10AEF0009A9ECB6DE37498DBA6E94BB96D9E2EE567
-:10AF0000B6651AF9FE6AE4FFE90A6ED74C2FE676B9
-:10AF1000EDF4226E5BA7AFE6796DD3CBB9BD7EFAB7
-:10AF20005A6E6F986E10FB504DA82827FF5339EBCF
-:10AF300022F0BFE9507D74E0F0EDEF107E7CBAC6E0
-:10AF4000799444B88EEB3D3E35CEFC7FB04CE8F7AB
-:10AF5000B541419F6CFEFFA03DF632F16D36FF8397
-:10AF60004FBCDB52E9DD560DFB396F327F9FE1EFBD
-:10AF7000BEF417CA83A2FF718CE877A1F6FFB45F15
-:10AF80005992E9570E1667FA9503F33DBFD23F4633
-:10AF900075B0AD92C1EFC4F23B621FF2FE606FA1CB
-:10AFA000F1585740277F2A115E130D627FF34E053B
-:10AFB00028DF87FEC56F781EEA07B21BE72BAFBFFD
-:10AFC000B4851C78F397C17139FE29FC93F7E99F8A
-:10AFD0000D67CAFD6CEB3CB9BF1CAAF372D9D9222C
-:10AFE0005FB3907B5DC87DA2CC1EA27C4B224BEE52
-:10AFF0003D3B8A78C890FBFC6E57EE5D392E8A88FF
-:10B00000771F4524F7C857E16EC3ADFF64DA51D509
-:10B010009DEF6B15F5ADE688D0AB6AABD017AA9E55
-:10B020006947916F8ABB73F8138E2AFCE3B6AA7F37
-:10B030003B6DCFC8AE1645C252216EADFF69D2A19D
-:10B040003CD6617501CB77B61C25F415CCE787D5C6
-:10B0500066C825FFE72D4761CF8E586C47B2E77968
-:10B06000F23470B88DF1E2D995C3786F2BCD9EACD8
-:10B07000D5051ED09EACE8CE614F56955B313BC7DF
-:10B08000399BBA855FFADA75B6F017D14F243F25A0
-:10B09000E1CBED0734750BFFA7A8D5FD7D8501F148
-:10B0A000B9A8075B5B53CD54C340796EA2FDAFB323
-:10B0B00026FB4906FB8323113A3FCA6733D1E1429D
-:10B0C000E5B3BA5DF885D03B97FD16AF3D17DF7B42
-:10B0D000FE8EC7FFD9F39EAEB036E4C2CB0FBA45A1
-:10B0E0005C7370E8D90CFED8A32EB8DE3472EA5532
-:10B0F000CBBC287AF5FCFC8AC368E758AFCEEE5784
-:10B100007C25171FCCE6577CAD5BC49BE8576C27AA
-:10B110003AAD5A22FC8A1F74C3C5F5171AEE627C39
-:10B120005DA8BF30D27D767FE140B7E72FC4596F6D
-:10B13000F85DBDF169FD851CFEC1A3CCBF30A550F3
-:10B14000FD0F516D8A7C88D023A8670ED238C6F1D6
-:10B15000EC2F1C0C0A7EB15C3D734797FD04D16354
-:10B160004FBDF0172E961CA0DFF734C13D5F793834
-:10B17000DF79554FAC1C9A243F0742497A37DD4F9F
-:10B18000EF95287E7C2F24DE11E05128EFFF4FCA77
-:10B190009526D9B9D1FC6F3C46F37B1D15E8DDE05F
-:10B1A000FE3E917FDEEDE6FFF6FBE2FF328970EEB8
-:10B1B000DFE1D70FE2F89FE7143832F2D49FF3CAE9
-:10B1C000C7E85DD031570FF96153612EBE9A399FA0
-:10B1D000789F4B4F574EF1EF3ACA74CE93BBF88924
-:10B1E000683638087FE77C99EB233BDBBF7880E447
-:10B1F000C76917792E2EB4E278645E54E43BD08D93
-:10B20000A94FCB8B28A09EA07CFC10BD514FABBF9B
-:10B2100016DB1847A7C51921D3CEE81B100307F783
-:10B22000D91B91393F3FB852C44583C17840CFA163
-:10B230005F76F565BE53CA6E95454F24E92DF183BF
-:10B2400051D5A4F4E870754D1BE53113BA78B4A458
-:10B2500085653B571D3BDC23B9F97893EDB6FAB908
-:10B260008EC25C76C56B87FA449ED6EB07168E5B62
-:10B27000C49F5A8565F3EF75C211C949CB2FFFDE14
-:10B28000D5133B2533B50A91B63324EC44C0485A54
-:10B29000329E77A0F836AE47060C074ED0F78549A8
-:10B2A000F810DB488916CB5977EF11F1CC4E5F8C43
-:10B2B000F7DB59AA729D726745EEBCD75F5DBDACE6
-:10B2C000859B6CCEFF8755AE2767CF9B72F949D31C
-:10B2D000ACA8CEF1F76D06DD2B311F389739D57349
-:10B2E000E7533B82C49F36E747F6BB79126DDE36E3
-:10B2F000C6FBEE7255A73CDC6A65DD0EDAE7415409
-:10B30000BBE49F64F3817F7E4D1ED73FD7C9FC66A7
-:10B31000339B2FE8EDDB04F9696A8AFD251FBCC366
-:10B32000798BDD3547B86FC084DB17FCE2D59B22F3
-:10B330002E3F9E61275C7A2549AE72F0CFFDE51362
-:10B340006CBF1F6898D840759B602460B6E23DF6DC
-:10B350002DB739BFBDBB5666BF35DFFD3DCE83EB94
-:10B360008AC28497DDB547582F679FC777E415F6E3
-:10B370003B826A8AF317C1B28F389E7DC83DC7DA17
-:10B380007A214F05A6D0C3055D71D071DFE2B79475
-:10B390003103FBD2BC971D1FD50F6E126F8B352D5D
-:10B3A000C57E467EFD1A89CEF766A90212C1505E9F
-:10B3B000E0F7BA600BF9F6DE6597746919F17D184C
-:10B3C000D2FA15E27704E9EFA840D978D6F766BD3E
-:10B3D000EFDD7EEC681ABC9E1EF75DAF5B673BD766
-:10B3E000FA3FF76D3B761495FF83356797ABBDAE9B
-:10B3F000DEDBD357CF74F2F8CBE3B7085D71C5EC51
-:10B40000EBF787C773FA25A33D82AFCFA58F0AFC60
-:10B41000E36CE7F75E379E9187FCBAAB1FBEDE2375
-:10B42000E4482F9FE2BCE55EF79DD3DE3CD8F06C8C
-:10B430008E7B3DD6A309793ACDCF9E1FF0CE85F9FC
-:10B4400001F3BB44FC105991477E00E2F3657AE7B3
-:10B45000F6A78866409A3C0F8432FD50CF0FF86DF6
-:10B460008FF0035E2CFE98ED786130C5763C6866FF
-:10B47000E609B2EDB8E68B715CA9956A9E9EE17A09
-:10B4800057F0ED6F3CE5903E48EDE2FA513EF26F29
-:10B490009E488D3BB9E8044B32DFDD7CB107F83CB8
-:10B4A00011233ED148F6A54BE57AC87EF9BD431F6E
-:10B4B00012BA9271B05DB8C3CCB7BB27F8FD8ECB82
-:10B4C000F7E7A227FD7D52E7FE6E85DE715CFB6625
-:10B4D0007DAEB8C36BE97D55E67BF84F2717CF7B70
-:10B4E00072910779422ED6C903E40FAC93F9DD0AB5
-:10B4F0003DEF55EBDC9423D5FDE964746F7A1F248E
-:10B50000B9F5A40533F2029F17EF5E4E6E13EF6894
-:10B51000F877860BE877A193FCFBC1CBE895AB32BB
-:10B52000A3DF4E42994CF562E788249DF6932EA541
-:10B53000278FA64CEB1682CD6DF6B92F87387FAFDB
-:10B540008624B757C238B74B6082DB6530C5AD057E
-:10B55000426F994745DD6305980A7DAF019BDB3A51
-:10B5600088735B0F496EBF79ED97FE70332EF9AF8C
-:10B570001EB72E7F1A2F02AF39E43B458FFEBDFB6D
-:10B580007B787EB0C760B93B17BD07C242DF369BF0
-:10B5900013ECDF878236EB615F44F0B707C7374BA8
-:10B5A000BEF8EFF5A3B27F67F2FF2B2134C6D03F80
-:10B5B0000000000000000000000000180000000073
-:10B5C000000000000000004000000000000000003B
-:10B5D0000000002800000000000000000000001033
-:10B5E000000000000000000000000020000000003B
-:10B5F000000000000000001000000000000000003B
-:10B600000000000800000000000000000000000032
-:10B6100000000000000000000000003900000000F1
-:10B6200000000000000000380000000000000000E2
-:10B630000000000000000000000000000000000802
-:10B6400000000000000000000000000000000000FA
-:10B65000000000000000000C0000000000000000DE
-:10B660000000000E000000000000000000000004C8
-:10B6700000000000000000000000001800000000B2
-:10B68000000000000000001C00000000000000009E
-:10B690000000001C0000000000000000000000137B
-:10B6A00000000000000000000000003A0000000060
-:10B6B0000000000000000001000000000000000089
-:10B6C0000000000200000000000000000000000177
-:10B6D000000000000000000000000010000000005A
-:10B6E000000000000000005000000000000000000A
-:10B6F0000000000000000000000000000000000347
-:10B700000000000000000000000000AB000000008E
-:10B710000000000000000008000000000000000021
-:10B720000000C00000100000000000080000C00879
-:10B7300000100000000000020000C0000010000027
-:10B740000000001000009FB0000000000000000892
-:10B750000000C08000100000000000040000C0884D
-:10B7600000100000000000020000C0800010000077
-:10B770000000001000009120000000000000000800
-:10B780000000934000010004000000010000934805
-:10B7900000000000000000020000935000000000C4
-:10B7A00000000008000093540000000000000002A8
-:10B7B00000009418000000000000000800009358EA
-:10B7C000000800000000000800009AB000400000DF
-:10B7D00000000040000093980008000000000008EE
-:10B7E000000093D80008000000000008000094202A
-:10B7F00000C8000000000098000095B0009800000C
-:10B8000000000028000095F00098000000000028CB
-:10B810000000C480054000300000054000009D206D
-:10B82000000800000000000100009D210008000049
-:10B8300000000001000020080010000000000010BF
-:10B8400000002000000000000000000800009CD85C
-:10B85000000800000000000200009D180000000029
-:10B8600000000001000000010000000000000000D6
-:10B8700000000009000000000000000000000002BD
-:10B8800000000000000000000000CF2000000000C9
-:10B89000000000200000CF46000000000000000172
-:10B8A0000000600000200000000000200000730085
-:10B8B000000800000000000800009FA00000000039
-:10B8C0000000000100009FA800000000000000012F
-:10B8D00000009F60000000000000001000009F6357
-:10B8E000000000000000000100009F610000000057
-:10B8F0000000000100009F66000000000000000141
-:10B9000000009F67000000000000000000009F682A
-:10B91000000000000000000400009F6C0000000018
-:10B9200000000004000000520000000000000000C1
-:10B930000000000300000000000000000000000301
-:10B9400000000000000000000000000500000000F2
-:10B9500000000000000000020000000000000000E5
-:10B9600000060000000000000000002000009F70A2
-:10B97000000000000000000100009F900000000097
-:10B98000000000080000005300000000000000005C
-:10B9900000009F98000000000000000200009F9C33
-:10B9A000000000000000000100009F9D000000005A
-:10B9B000000000010000000900000000000000007D
-:10B9C0000000000100000000000000000000004432
-:10B9D0000000000000000000000000010000000066
-:10B9E0000000000000000050000000000000000007
-:10B9F000000000890000000000000000000012C8E4
-:10BA00000080000000000080000000010000000035
-:10BA1000000000000000A000071000000000071058
-:10BA200000001AC800000000000000080000AEC0BE
-:10BA300000080000000000080000AE400008000000
-:10BA4000000000080000AE800008000000000008B0
-:10BA5000000020080010000000000010000020007E
-:10BA600000000000000000080000A01007100040C7
-:10BA70000000004000001BF800080000000000016A
-:10BA800000001BF9000800000000000100001AD0AF
-:10BA9000000000000000000100001AD800000000B3
-:10BAA0000000000200001ADA00000000000000029E
-:10BAB0008000000000000000000000000000AF0057
-:10BAC000000000000000002000001B78002800009B
-:10BAD000000000040000E000002000000000002042
-:10BAE0000000F300000800000000000800001AF049
-:10BAF000000000000000010800001B3700000000EB
-:10BB00000000000100001B0F000000000000000109
-:10BB100000001B70000000000000000400001B7407
-:10BB200000000000000000040000005000000000C1
-:10BB30000000000000000003000000000000000002
-:10BB400000000005000000000000000000000006EA
-:10BB500000000000000000000000000700000000DE
-:10BB60000000000000001BC80000000000000001F1
-:10BB700000001BE800000000000000080000005169
-:10BB8000000000000000000000001BD000000000CA
-:10BB90000000000400001BD40000000000000004AE
-:10BBA00000001BD8000000000000000400001BDCA7
-:10BBB00000000000000000080000B00000180000B5
-:10BBC000000000180000C00000400000000000401D
-:10BBD0000000C00000400002000000010000C001A1
-:10BBE00000400002000000000000E2000020000011
-:10BBF000000000200000E204000200080020000213
-:10BC00008000000000000000000000000000E200D2
-:10BC100000080020000000040000F40000280000DC
-:10BC2000000000280000F540001000000000001097
-:10BC30000000F5C000200000000000200000F5C05A
-:10BC400000020020000000020000F30000200000BD
-:10BC5000000000200000200800100000000000107C
-:10BC60000000200000000000000000080000110893
-:10BC70000008000000000008000011680008000033
-:10BC800000000008000011A80008000000000008E3
-:10BC900000001240000800000000000100001241F6
-:10BCA0000008000000000001000040000020000427
-:10BCB00000000010000059000030001800000010C3
-:10BCC0000000590800300018000000020000570072
-:10BCD00000080000000000010000570100080000FB
-:10BCE00000000001000011E8000000000000000159
-:10BCF000000011F00000000000000001000011F839
-:10BD000000000000000000100000124400080000C5
-:10BD1000000000040000400000200000000000209F
-:10BD20000000530000100000000000100000153853
-:10BD300000000000000000010000000300000000FF
-:10BD400000000000000000000000000000000000F3
-:10BD500000000001000000000000000000000004DE
-:10BD600000000000000000000000150800000000B6
-:10BD7000000000010000152800000000000000087D
-:10BD800000000050000000000000000000008308D8
-:10BD900000800000000000800000000100000000A2
-:10BDA000000000000000200800100000000000104B
-:10BDB00000002000000000000000000800008410C7
-:10BDC0000008000000000008000084700008000067
-:10BDD0000000000800060000046000280000046065
-:10BDE00000008520000800000000000100008521FF
-:10BDF00000080000000000018000000000000000BA
-:10BE000000000000000084080000000000000001A5
-:10BE1000000084F40008000000000002000084F626
-:10BE2000000800000000000200008504001000006F
-:10BE300000000004000087600000000000000020F7
-:10BE400000006000002000000000002000007300DF
-:10BE500000080000000000080000000300000000CF
-:10BE600000000000000000050000000000000000CD
-:10BE700000000006000000000000000000000007B5
-:10BE80000000000000000000000088080000000022
-:10BE900000000001000088280000000000000008E9
-:10BEA00000000050000000000000000000008810AA
-:10BEB00000000000000000040000881400000000E2
-:10BEC00000000004000088180000000000000004CA
-:10BED0000000881C00000000000000080000300086
-:10BEE0000040000000000008000030080040000092
-:10BEF000000000280000339001C00010000000087E
-:10BF00000000320000200000000000200000372068
-:10BF1000000000000000000800001020062000388B
-:10BF2000000000080000A000000000000000200049
-:10BF300000003EA9000000000000000100003EC813
-:10BF4000000000000000000280000000000000006F
-:10BF50000000000000006000002000000000000859
-:10BF60000000400000080000000000010000400147
-:10BF7000000800000000000100004040000800042C
-:10BF800000000002000040600008000400000004FF
-:10BF90000000400000080000000000040000400411
-:10BFA0000008000000000004000040400000000005
-:10BFB00000000008000040480000000000000008E9
-:10BFC0000000800000000000000000100000504051
-:10BFD000000100040000000100005000000000000B
-:10BFE00000000020000050080010000000000004C5
-:10BFF0000000500C0010000000000001000052C7BB
-:10C000000000000000000001000052C60000000017
-:10C0100000000001000030000030001800000004A3
-:10C020000000300400300018000000040000300858
-:10C0300000300018000000020000300A0030001834
-:10C04000000000020000300C003000180000000169
-:10C050000000300D00300018000000010000300E1C
-:10C0600000300018000000010000301000300018FF
-:10C07000000000040000301400300018000000042C
-:10C08000000050000100008000080004000050047F
-:10C0900001000080000800040000000A0000000009
-:10C0A0000000000000005068010000800000000156
-:10C0B0000000506901000080000000010000506C89
-:10C0C00001000080000000020000506E01000080AE
-:10C0D0000000000200005070010000800000000419
-:10C0E0000000507401000080000000040000506651
-:10C0F0000100008000000002000050640100008088
-:10C1000000000001000050600100008000000002FB
-:10C11000000050620100008000000002000050504A
-:10C120000100008000000004000050540100008065
-:10C1300000000004000050580100008000000004CE
-:10C140000000505C01000080000000040000507CF2
-:10C1500001000080000000010000507D010000800F
-:10C160000000000100004018001000000000000462
-:10C170000000409000100000000000040000409803
-:10C18000001000000000000400004110000000004A
-:10C190000000000200004112000000000000000248
-:10C1A00000004114000000000000000200004116E1
-:10C1B00000000000000000020000604000080000D5
-:10C1C00000000002000060420008000000000002C1
-:10C1D00000006044000800000000000400006080CF
-:10C1E0000008000000000008000060C000400008D7
-:10C1F00000000008000060000008000000000002CD
-:10C20000000060020008000000000001000060045F
-:10C210000008000000000002000063400008000069
-:10C220000000000800006380000800000000000417
-:10C23000000063840008000000000001000063C0EB
-:10C240000008000000000002000063C400080000B5
-:10C25000000000020000640000080000000000046C
-:10C2600000007000001000000000000400007004D6
-:10C270000010000000000004000070080010000022
-:10C280000000000400009000000800000000000210
-:10C29000000090020008000000000001000090046F
-:10C2A00000080000000000020000904000080000AC
-:10C2B000000000020000904400080000000000029E
-:10C2C00000009046000800000000000200009648B0
-:10C2D0000008000000000008000090800008000036
-:10C2E000000000020000908400080000000000022E
-:10C2F0000000968800080000000000080000804050
-:10C30000000800000000000100008041000800005B
-:10C310000000000100008042000800000000000151
-:10C3200000008043000800000000000100008000C1
-:10C330000008000000000002000080020008000069
-:10C34000000000010000800400080000000000025E
-:10C35000000080C00008000000000002000080C251
-:10C360000008000000000002000080C40008000077
-:10C3700000000002000080800008000000000001B2
-:10C3800000008081000800000000000100008082A1
-:10C390000008000000000001000080830008000089
-:10C3A000000000010000808400080000000000017F
-:10C3B0000000808500080000000000010000808669
-:10C3C00000080000000000010000600000080000FC
-:10C3D00000000002000060020008000000000001F0
-:10C3E000000060040008000000000002000060423D
-:10C3F00000C00018000000020000604000C00018EB
-:10C40000000000020000604C00C00018000000089E
-:10C410000000604400C000180000000800006057E1
-:10C4200000C00018000000010000605400C00018A7
-:10C43000000000020000605600C00018000000016B
-:10C440000000664000080000000000080000668050
-:10C450000008000000000008000066C0000800009E
-:10C46000000000080000DA4200180000000000028E
-:10C470000000DE4000000000000000000000E000BE
-:10C4800000000000000000040000D0C00000000018
-:10C49000000000040000D0C4000000000000000400
-:10C4A0000000D0C800000000000000040000D0CC54
-:10C4B00000000000000000040000D0D000000000D8
-:10C4C000000000040000D0D40000000000000004C0
-:10C4D0000000D0D800000000000000040000D0C020
-:10C4E00000000000000000200000DB000000000051
-:10C4F000000000040000DB000000000000000068F5
-:10C500000000B94800000000000000000000D0005A
-:10C5100000000000000000040000B0C000000000A7
-:10C52000000000040000B0C400000000000000048F
-:10C530000000B0C800000000000000040000B0C00F
-:10C5400000000000000000100000D6B00000000055
-:10C55000000000040000D6B4000000000000000449
-:10C560000000D6B800000000000000040000D6BCA7
-:10C5700000000000000000040000D6B00000000031
-:10C58000000000100000D348000000000000000878
-:10C590000000D358000000000000008000000010E0
-:10C5A00000000000000000000000D3580000000060
-:10C5B0000000000800000000060205000000000066
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw.ihex b/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw.ihex
new file mode 100644
index 0000000..8405e71
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw.ihex
@@ -0,0 +1,15473 @@
+:1000000000005310000000680000070C000053803F
+:100010000000318000005A90000000B000008C18F1
+:100020000000C13400008CD0000000D800014E0850
+:100030000000F26400014EE800000074000241502C
+:1000400000005250000241C8000000B40002942099
+:10005000000121EC000294D800000FFC0003B6C898
+:10006000000000040003C6C8020400480000000F9E
+:1000700002040054000000450204005C0000000679
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040258000000360204025C000000365F
+:10017000020402600810000002040264081000007B
+:1001800002040004000000FF02040008000000FF59
+:100190000204000C000000FF02040010000000FF39
+:1001A000020400140000007F02040018000000FF99
+:1001B0000204001C000000FF02040020000000FFF9
+:1001C000020400240000003E020400280000000099
+:1001D0000204002C0000003F020400300000003F39
+:1001E000020400340000003F020400380000003F19
+:1001F0000204003C0000003F020400400000003FF9
+:10020000020400440000003F020404CC000000018E
+:1002100002042008000002110204200C0000020069
+:10022000020420100000020402042014000002193D
+:100230000204201C0000FFFF020420200000FFFF3A
+:10024000020420240000FFFF020420280000FFFF1A
+:1002500002042038000000200604203C0000000FAB
+:1002600002042078000000210604207C0000000F1A
+:10027000020420B800000001060420BC0000000FAA
+:10028000020420F800000001060420FC0000003FEA
+:10029000020421F800000001060421FC0000000F08
+:1002A0000204223807FFFFFF0204223C0000007F07
+:1002B0000204224007FFFFFF020422440000003F27
+:1002C00001042248000000000104224C000000004C
+:1002D000010422500000000001042254000000002C
+:1002E00001042258000000000104225C000000000C
+:1002F00001042260000000000104226400000000EC
+:1003000001042268000000000104226C00000000CB
+:1003100001042270000000000104227400000000AB
+:1003200001042278000000000104227C000000008B
+:10033000020422C00000FFFF020422C40000FFFFED
+:10034000020422C80000FFFF020422CC0000FFFFCD
+:100350000C042000000003E80A0420000000000153
+:100360000B042000000000030605400000000D0003
+:100370000205004400000020020500480000003291
+:1003800002050090021500200205009402150020CD
+:1003900002050098000000300205009C08100000D3
+:1003A000020500A000000036020500A40000003095
+:1003B000020500A800000031020500B000000004A2
+:1003C000020500B400000005020500C000000000A6
+:1003D000020500C400000004020500D40000000172
+:1003E00002050114000000010205011C00000001CB
+:1003F00002050120000000020205020400000001C5
+:100400000205020C0000004002050210000000403E
+:100410000205021C00000020020502200000001C52
+:100420000205022400000020060502400000000A28
+:1004300004050280002000000205005000000007B3
+:1004400002050054000000070205005800000000EB
+:100450000205005C000000080205006000000001C9
+:100460000605006400000003020500D80000000635
+:100470000205000400000001020500080000000160
+:100480000205000C00000001020500100000000140
+:100490000205001400000001020500180000000120
+:1004A0000205001C00000001020500200000000100
+:1004B00002050024000000010205002800000001E0
+:1004C0000205002C000000010205003000000001C0
+:1004D00002050034000000010205003800000001A0
+:1004E0000205003C00000001020500400000000180
+:1004F000020500E00000000D020500E80000000019
+:10050000020500F000000000020500F800000000F5
+:10051000020500E40000002D020500EC00000020B0
+:10052000020500F400000020020500FC000000208D
+:10053000020500E00000001D020500E800000010B8
+:10054000020500F000000010020500F80000001095
+:10055000020500E40000003D020500EC0000003050
+:10056000020500F400000030020500FC000000302D
+:10057000020500E00000004D020500E80000004018
+:10058000020500F000000040020500F800000040F5
+:10059000020500E40000006D020500EC00000060B0
+:1005A000020500F400000060020500FC000000608D
+:1005B000020500E00000005D020500E800000050B8
+:1005C000020500F000000050020500F80000005095
+:1005D000020500E40000007D020500EC0000007050
+:1005E000020500F400000070020500FC000000702D
+:1005F0000406100002000020020600DC00000001DA
+:100600000406020000030220020600DC00000000D5
+:100610000718040000AD0000081807D800050223E1
+:10062000071C000029920000071C8000312A0A657F
+:10063000071D000034A216B0071D80002E7A23D9B2
+:10064000071E000003502F78081E07F03F02022506
+:10065000021800BC0000003001180000000000007B
+:10066000011800040000000001180008000000004C
+:100670000118000C0000000001180010000000002C
+:100680000118001400000000021800200000000102
+:1006900002180024000000020218002800000003D5
+:1006A0000218002C000000000218003000000004B6
+:1006B0000218003400000001021800380000000099
+:1006C0000218003C00000001021800400000000475
+:1006D0000218004400000000021800480000000159
+:1006E0000218004C00000003021800500000000037
+:1006F0000218005400000001021800580000000415
+:100700000218005C000000000218006000000001F8
+:1007100002180064000000030218006800000000D6
+:100720000218006C000000010218007000000004B4
+:100730000218007400000000021800780000000495
+:100740000218007C00000003061800800000000270
+:10075000021800A400007FFF021800A8000003FF99
+:1007600002180224000000000218023400000000F9
+:100770000218024C00000000021802E4000000FF12
+:100780000618100000000400021B8BC000000001CE
+:10079000021B800000000034021B80400000001893
+:1007A000021B80800000000C021B80C000000020A3
+:1007B0000C1B8300000864700A1B830000000157B3
+:1007C0000B1B83000000055F0A1B83400000000034
+:1007D0000C1B8340000002260B1B8340000000011D
+:1007E000021B838000086470021B83C00000022685
+:1007F000021B1480000000010A1B1480000000008E
+:10080000021B944000000001061B944800000002F7
+:10081000061A1000000002B3041A1ACC00010227C5
+:10082000061A1AD000000008061A2008000000C8A6
+:10083000061A200000000002041A1BF8009002288B
+:10084000061A371800000004061A371000000002CC
+:10085000061A500000000002061A500800000004AA
+:10086000061A501800000004061A50280000000460
+:10087000061A503800000004061A50480000000410
+:10088000061A505800000004061A506800000004C0
+:10089000061A507800000002041A52C0000202B882
+:1008A000061A405000000006041A4068000202BA0E
+:1008B000041A4040000402BC041A8000000102C077
+:1008C000061A800400000003041A8010000102C10F
+:1008D000061A801400000003041A8020000102C2DE
+:1008E000061A802400000003041A8030000102C3AD
+:1008F000061A803400000003041A8040000102C47C
+:10090000061A804400000003041A8050000102C54A
+:10091000061A805400000003041A8060000102C619
+:10092000061A806400000003041A8070000102C7E8
+:10093000061A807400000003041A8080000102C8B7
+:10094000061A808400000003041A8090000102C986
+:10095000061A809400000003041A80A0000102CA55
+:10096000061A80A400000003041A80B0000102CB24
+:10097000061A80B400000003041A80C0000102CCF3
+:10098000061A80C400000003041A80D0000102CDC2
+:10099000061A80D400000003041A80E0000102CE91
+:1009A000061A80E400000003041A80F0000102CF60
+:1009B000061A80F400000003041A8100000102D02E
+:1009C000061A810400000003041A8110000102D1FC
+:1009D000061A811400000003041A8120000102D2CB
+:1009E000061A812400000003041A8130000102D39A
+:1009F000061A813400000003041A8140000102D469
+:100A0000061A814400000003041A8150000102D537
+:100A1000061A815400000003041A8160000102D606
+:100A2000061A816400000003041A8170000102D7D5
+:100A3000061A817400000003041A8180000102D8A4
+:100A4000061A818400000003041A8190000102D973
+:100A5000061A819400000003041A81A0000102DA42
+:100A6000061A81A400000003041A81B0000102DB11
+:100A7000061A81B400000003041A81C0000102DCE0
+:100A8000061A81C400000003041A81D0000102DDAF
+:100A9000061A81D400000003041A81E0000102DE7E
+:100AA000061A81E400000003041A81F0000102DF4D
+:100AB000061A81F400000003041A8200000102E01B
+:100AC000061A820400000003041A8210000102E1E9
+:100AD000061A821400000003041A8220000102E2B8
+:100AE000061A822400000003041A8230000102E387
+:100AF000061A823400000003041A8240000102E456
+:100B0000061A824400000003041A8250000102E524
+:100B1000061A825400000003041A8260000102E6F3
+:100B2000061A826400000003041A8270000102E7C2
+:100B3000061A827400000003041A8280000102E891
+:100B4000061A828400000003041A8290000102E960
+:100B5000061A829400000003041A82A0000102EA2F
+:100B6000061A82A400000003041A82B0000102EBFE
+:100B7000061A82B400000003041A82C0000102ECCD
+:100B8000061A82C400000003041A82D0000102ED9C
+:100B9000061A82D400000003041A82E0000102EE6B
+:100BA000061A82E400000003041A82F0000102EF3A
+:100BB000061A82F400000003041A8300000102F008
+:100BC000061A830400000003041A8310000102F1D6
+:100BD000061A831400000003041A8320000102F2A5
+:100BE000061A832400000003041A8330000102F374
+:100BF000061A833400000003041A8340000102F443
+:100C0000061A834400000003041A8350000102F511
+:100C1000061A835400000003041A8360000102F6E0
+:100C2000061A836400000003041A8370000102F7AF
+:100C3000061A837400000003041A8380000102F87E
+:100C4000061A838400000003041A8390000102F94D
+:100C5000061A839400000003041A83A0000102FA1C
+:100C6000061A83A400000003041A83B0000102FBEB
+:100C7000061A83B400000003041A83C0000102FCBA
+:100C8000061A83C400000003041A83D0000102FD89
+:100C9000061A83D400000003041A83E0000102FE58
+:100CA000061A83E400000003041A83F0000102FF27
+:100CB000061A83F400000003041A840000010300F4
+:100CC000061A840400000003041A841000010301C2
+:100CD000061A841400000003041A84200001030291
+:100CE000061A842400000003041A84300001030360
+:100CF000061A843400000003041A8440000103042F
+:100D0000061A844400000003041A845000010305FD
+:100D1000061A845400000003041A846000010306CC
+:100D2000061A846400000003041A8470000103079B
+:100D3000061A847400000003041A8480000103086A
+:100D4000061A848400000003041A84900001030939
+:100D5000061A849400000003041A84A00001030A08
+:100D6000061A84A400000003041A84B00001030BD7
+:100D7000061A84B400000003041A84C00001030CA6
+:100D8000061A84C400000003041A84D00001030D75
+:100D9000061A84D400000003041A84E00001030E44
+:100DA000061A84E400000003041A84F00001030F13
+:100DB000061A84F400000003041A850000010310E1
+:100DC000061A850400000003041A851000010311AF
+:100DD000061A851400000003041A8520000103127E
+:100DE000061A852400000003041A8530000103134D
+:100DF000061A853400000003041A8540000103141C
+:100E0000061A854400000003041A855000010315EA
+:100E1000061A855400000003041A856000010316B9
+:100E2000061A856400000003041A85700001031788
+:100E3000061A857400000003041A85800001031857
+:100E4000061A858400000003041A85900001031926
+:100E5000061A859400000003041A85A00001031AF5
+:100E6000061A85A400000003041A85B00001031BC4
+:100E7000061A85B400000003041A85C00001031C93
+:100E8000061A85C400000003041A85D00001031D62
+:100E9000061A85D400000003041A85E00001031E31
+:100EA000061A85E400000003041A85F00001031F00
+:100EB000061A85F400000003041A860000010320CE
+:100EC000061A860400000003041A8610000103219C
+:100ED000061A861400000003041A8620000103226B
+:100EE000061A862400000003041A8630000103233A
+:100EF000061A863400000003041A86400001032409
+:100F0000061A864400000003041A865000010325D7
+:100F1000061A865400000003041A866000010326A6
+:100F2000061A866400000003041A86700001032775
+:100F3000061A867400000003041A86800001032844
+:100F4000061A868400000003041A86900001032913
+:100F5000061A869400000003041A86A00001032AE2
+:100F6000061A86A400000003041A86B00001032BB1
+:100F7000061A86B400000003041A86C00001032C80
+:100F8000061A86C400000003041A86D00001032D4F
+:100F9000061A86D400000003041A86E00001032E1E
+:100FA000061A86E400000003041A86F00001032FED
+:100FB000061A86F400000003041A870000010330BB
+:100FC000061A870400000003041A87100001033189
+:100FD000061A871400000003041A87200001033258
+:100FE000061A872400000003041A87300001033327
+:100FF000061A873400000003041A874000010334F6
+:10100000061A874400000003041A875000010335C4
+:10101000061A875400000003041A87600001033693
+:10102000061A876400000003041A87700001033762
+:10103000061A877400000003041A87800001033831
+:10104000061A878400000003041A87900001033900
+:10105000061A879400000003041A87A00001033ACF
+:10106000061A87A400000003041A87B00001033B9E
+:10107000061A87B400000003041A87C00001033C6D
+:10108000061A87C400000003041A87D00001033D3C
+:10109000061A87D400000003041A87E00001033E0B
+:1010A000061A87E400000003041A87F00001033FDA
+:1010B000061A87F400000003041A880000010340A8
+:1010C000061A880400000003041A88100001034176
+:1010D000061A881400000003041A88200001034245
+:1010E000061A882400000003041A88300001034314
+:1010F000061A883400000003041A884000010344E3
+:10110000061A884400000003041A885000010345B1
+:10111000061A885400000003041A88600001034680
+:10112000061A886400000003041A8870000103474F
+:10113000061A887400000003041A8880000103481E
+:10114000061A888400000003041A889000010349ED
+:10115000061A889400000003041A88A00001034ABC
+:10116000061A88A400000003041A88B00001034B8B
+:10117000061A88B400000003041A88C00001034C5A
+:10118000061A88C400000003041A88D00001034D29
+:10119000061A88D400000003041A88E00001034EF8
+:1011A000061A88E400000003041A88F00001034FC7
+:1011B000061A88F400000003041A89000001035095
+:1011C000061A890400000003041A89100001035163
+:1011D000061A891400000003041A89200001035232
+:1011E000061A892400000003041A89300001035301
+:1011F000061A893400000003041A894000010354D0
+:10120000061A894400000003041A8950000103559E
+:10121000061A895400000003041A8960000103566D
+:10122000061A896400000003041A8970000103573C
+:10123000061A897400000003041A8980000103580B
+:10124000061A898400000003041A899000010359DA
+:10125000061A899400000003041A89A00001035AA9
+:10126000061A89A400000003041A89B00001035B78
+:10127000061A89B400000003041A89C00001035C47
+:10128000061A89C400000003041A89D00001035D16
+:10129000061A89D400000003041A89E00001035EE5
+:1012A000061A89E400000003041A89F00001035FB4
+:1012B000061A89F400000003041A8A000001036082
+:1012C000061A8A0400000003041A8A100001036150
+:1012D000061A8A1400000003041A8A20000103621F
+:1012E000061A8A2400000003041A8A3000010363EE
+:1012F000061A8A3400000003041A8A4000010364BD
+:10130000061A8A4400000003041A8A50000103658B
+:10131000061A8A5400000003041A8A60000103665A
+:10132000061A8A6400000003041A8A700001036729
+:10133000061A8A7400000003041A8A8000010368F8
+:10134000061A8A8400000003041A8A9000010369C7
+:10135000061A8A9400000003041A8AA00001036A96
+:10136000061A8AA400000003041A8AB00001036B65
+:10137000061A8AB400000003041A8AC00001036C34
+:10138000061A8AC400000003041A8AD00001036D03
+:10139000061A8AD400000003041A8AE00001036ED2
+:1013A000061A8AE400000003041A8AF00001036FA1
+:1013B000061A8AF400000003041A8B00000103706F
+:1013C000061A8B0400000003041A8B10000103713D
+:1013D000061A8B1400000003041A8B20000103720C
+:1013E000061A8B2400000003041A8B3000010373DB
+:1013F000061A8B3400000003041A8B4000010374AA
+:10140000061A8B4400000003041A8B500001037578
+:10141000061A8B5400000003041A8B600001037647
+:10142000061A8B6400000003041A8B700001037716
+:10143000061A8B7400000003041A8B8000010378E5
+:10144000061A8B8400000003041A8B9000010379B4
+:10145000061A8B9400000003041A8BA00001037A83
+:10146000061A8BA400000003041A8BB00001037B52
+:10147000061A8BB400000003041A8BC00001037C21
+:10148000061A8BC400000003041A8BD00001037DF0
+:10149000061A8BD400000003041A8BE00001037EBF
+:1014A000061A8BE400000003041A8BF00001037F8E
+:1014B000061A8BF400000003041A8C00000103805C
+:1014C000061A8C0400000003041A8C10000103812A
+:1014D000061A8C1400000003041A8C2000010382F9
+:1014E000061A8C2400000003041A8C3000010383C8
+:1014F000061A8C3400000003041A8C400001038497
+:10150000061A8C4400000003041A8C500001038565
+:10151000061A8C5400000003041A8C600001038634
+:10152000061A8C6400000003041A8C700001038703
+:10153000061A8C7400000003041A8C8000010388D2
+:10154000061A8C8400000003041A8C9000010389A1
+:10155000061A8C9400000003041A8CA00001038A70
+:10156000061A8CA400000003041A8CB00001038B3F
+:10157000061A8CB400000003041A8CC00001038C0E
+:10158000061A8CC400000003041A8CD00001038DDD
+:10159000061A8CD400000003041A8CE00001038EAC
+:1015A000061A8CE400000003041A8CF00001038F7B
+:1015B000061A8CF400000003041A8D000001039049
+:1015C000061A8D0400000003041A8D100001039117
+:1015D000061A8D1400000003041A8D2000010392E6
+:1015E000061A8D2400000003041A8D3000010393B5
+:1015F000061A8D3400000003041A8D400001039484
+:10160000061A8D4400000003041A8D500001039552
+:10161000061A8D5400000003041A8D600001039621
+:10162000061A8D6400000003041A8D7000010397F0
+:10163000061A8D7400000003041A8D8000010398BF
+:10164000061A8D8400000003041A8D90000103998E
+:10165000061A8D9400000003041A8DA00001039A5D
+:10166000061A8DA400000003041A8DB00001039B2C
+:10167000061A8DB400000003041A8DC00001039CFB
+:10168000061A8DC400000003041A8DD00001039DCA
+:10169000061A8DD400000003041A8DE00001039E99
+:1016A000061A8DE400000003041A8DF00001039F68
+:1016B000061A8DF400000003041A8E00000103A036
+:1016C000061A8E0400000003041A8E10000103A104
+:1016D000061A8E1400000003041A8E20000103A2D3
+:1016E000061A8E2400000003041A8E30000103A3A2
+:1016F000061A8E3400000003041A8E40000103A471
+:10170000061A8E4400000003041A8E50000103A53F
+:10171000061A8E5400000003041A8E60000103A60E
+:10172000061A8E6400000003041A8E70000103A7DD
+:10173000061A8E7400000003041A8E80000103A8AC
+:10174000061A8E8400000003041A8E90000103A97B
+:10175000061A8E9400000003041A8EA0000103AA4A
+:10176000061A8EA400000003041A8EB0000103AB19
+:10177000061A8EB400000003041A8EC0000103ACE8
+:10178000061A8EC400000003041A8ED0000103ADB7
+:10179000061A8ED400000003041A8EE0000103AE86
+:1017A000061A8EE400000003041A8EF0000103AF55
+:1017B000061A8EF400000003041A8F00000103B023
+:1017C000061A8F0400000003041A8F10000103B1F1
+:1017D000061A8F1400000003041A8F20000103B2C0
+:1017E000061A8F2400000003041A8F30000103B38F
+:1017F000061A8F3400000003041A8F40000103B45E
+:10180000061A8F4400000003041A8F50000103B52C
+:10181000061A8F5400000003041A8F60000103B6FB
+:10182000061A8F6400000003041A8F70000103B7CA
+:10183000061A8F7400000003041A8F80000103B899
+:10184000061A8F8400000003041A8F90000103B968
+:10185000061A8F9400000003041A8FA0000103BA37
+:10186000061A8FA400000003041A8FB0000103BB06
+:10187000061A8FB400000003041A8FC0000103BCD5
+:10188000061A8FC400000003041A8FD0000103BDA4
+:10189000061A8FD400000003041A8FE0000103BE73
+:1018A000061A8FE400000007041A62C0002003BF7C
+:1018B000061A1AF000000042061AAF0000000008E5
+:1018C000061AE00000000540061AD0000000007271
+:1018D000061AD24800000010061AD6B000000020F8
+:1018E000061AD47000000090061AD46800000002A6
+:1018F000061AA000000001C4061A30000000001003
+:10190000061A308000000010061A31000000001096
+:10191000061A318000000010061A33000000001281
+:10192000061A339000000070061AD4580000000216
+:10193000061AD34800000002061AD35800000020FF
+:10194000061AA710000001C4061A3040000000105B
+:10195000061A30C000000010061A314000000010C6
+:10196000061A31C000000010061A334800000012A9
+:10197000061A355000000070061AD46000000002FC
+:10198000061AD35000000002061AD3D80000002027
+:10199000021AAE2000000000061A500000000002EB
+:1019A000061A508000000012041A4000000203DFF3
+:1019B000041A63C0000203E1061A7000000000046C
+:1019C000061A320000000008021AAE2400000000CF
+:1019D000061A501000000002061A50C8000000123B
+:1019E000041A4008000203E3041A63C8000203E576
+:1019F000061A701000000004061A322000000008C9
+:101A0000021AAE2800000000061A50200000000252
+:101A1000061A511000000012041A4010000203E7D9
+:101A2000041A63D0000203E9061A702000000004C3
+:101A3000061A324000000008021AAE2C0000000016
+:101A4000061A503000000002061A51580000001219
+:101A5000041A4018000203EB041A63D8000203EDD5
+:101A6000061A703000000004061A326000000008F8
+:101A7000021AAE3000000000061A504000000002BA
+:101A8000061A51A000000012041A4020000203EFC1
+:101A9000041A63E0000203F1061A7040000000041B
+:101AA000061A328000000008021AAE34000000005E
+:101AB000061A505000000002061A51E800000012F9
+:101AC000041A4028000203F3041A63E8000203F535
+:101AD000061A705000000004061A32A00000000828
+:101AE000021AAE3800000000061A50600000000222
+:101AF000061A523000000012041A4030000203F7A8
+:101B0000041A63F0000203F9061A70600000000472
+:101B1000061A32C000000008021AAE3C00000000A5
+:101B2000061A507000000002061A527800000012D7
+:101B3000041A4038000203FB041A63F8000203FD94
+:101B4000061A707000000004061A32E00000000857
+:101B50000200A2A4000002090200A270000000001E
+:101B60000200A274000000000200A2700000000049
+:101B70000200A274000000000200A2700000000039
+:101B80000200A274000000000200A2700000000029
+:101B90000200A27400000000020100B40000000175
+:101BA000020100B800000001020100CC00000001A9
+:101BB000020100D000000001020100DC0000000171
+:101BC0000201010000000001020101040000000107
+:101BD0000201007C003000000201008400000028A7
+:101BE0000201008C0000000002010130000000042E
+:101BF0000201025C00000001020103280000000055
+:101C0000020160580000FFFF020160700000000741
+:101C10000201055400000030020100C40000000170
+:101C2000020100F800000001020100F000000001C4
+:101C3000020100800030000002010088000000283E
+:101C400002010090000000000201013400000004C5
+:101C5000020102DC000000010201032C0000000070
+:101C60000201605C0000FFFF0201607400000007D9
+:101C70000201056400000030020100C800000001FC
+:101C8000020100FC00000001020100F4000000015C
+:101C9000020C100000000028020C200800000211B5
+:101CA000020C200C00000200020C201000000204B4
+:101CB000020C201C0000FFFF020C20200000FFFF90
+:101CC000020C20240000FFFF020C20280000FFFF70
+:101CD000020C203800000000020C203C00000037FD
+:101CE000020C204000000021020C204400000020D3
+:101CF000060C20480000001D020C20BC0000000162
+:101D0000060C20C00000003F020C21BC00000001B6
+:101D1000020C21C000000001020C21C400000001DF
+:101D2000060C21C80000001C020C223807FFFFFF30
+:101D3000020C223C0000007F020C224007FFFFFF44
+:101D4000020C22440000003F010C22480000000069
+:101D5000010C224C00000000010C22500000000089
+:101D6000010C225400000000010C22580000000069
+:101D7000010C225C00000000010C22600000000049
+:101D8000010C226400000000010C22680000000029
+:101D9000010C226C00000000010C22700000000009
+:101DA000010C227400000000010C227800000000E9
+:101DB000010C227C00000000020C22D80000FFFF72
+:101DC000020C22DC0000FFFF020C22E00000FFFFFB
+:101DD000020C22E40000FFFF0C0C2000000003E8CE
+:101DE0000A0C2000000000010B0C20000000000382
+:101DF000020C400800001011020C400C0000100002
+:101E0000020C401000001004020C401400001021CD
+:101E1000020C401C0000FFFF020C40200000FFFFEE
+:101E2000020C40240000FFFF020C40280000FFFFCE
+:101E3000020C403800000046020C403C0000000C40
+:101E4000060C404000000002020C40480000001850
+:101E5000020C404C000000F0060C40500000001F37
+:101E6000020C40CC00000001060C40D00000003AFB
+:101E7000020C41B800000001060C41BC0000000348
+:101E8000020C41C800000001020C41CC000000011E
+:101E9000060C41D00000001A020C423807FFFFFF79
+:101EA000020C423C0000007F020C424007FFFFFF93
+:101EB000020C42440000003F010C424800000000B8
+:101EC000010C424C00000000010C425000000000D8
+:101ED000010C425400000000010C425800000000B8
+:101EE000010C425C00000000010C42600000000098
+:101EF000010C426400000000010C42680000000078
+:101F0000010C426C00000000010C42700000000057
+:101F1000010C427400000000010C42780000000037
+:101F2000010C427C00000000010C42800000000017
+:101F3000020C42D80000FFFF020C42DC0000FFFF51
+:101F4000020C42E00000FFFF020C42E40000FFFF31
+:101F50000C0C4000000003E80A0C400000000001E7
+:101F60000B0C400000000003060D400000000A00BA
+:101F7000020D004400000032020D008C021500200A
+:101F8000020D009002150020020D009408100000C0
+:101F9000020D009800000036020D00A000000000B5
+:101FA000020D00A400000004020D00A800000004BF
+:101FB000060D00AC00000002020D00B80000000297
+:101FC000020D00C000000001020D00C80000000268
+:101FD000020D00CC00000002020D015C00000001B7
+:101FE000020D016400000001020D01680000000202
+:101FF000020D020400000001020D020C000000208E
+:10200000020D021000000040020D0214000000400A
+:10201000020D022000000003020D0224000000183F
+:10202000060D028000000012040D0300001803FFDB
+:10203000060D03600000000C020D004C00000001C2
+:10204000020D005000000002020D005400000000CC
+:10205000020D005800000008060D005C000000049E
+:10206000020D00C400000004020D00040000000185
+:10207000020D000800000001020D000C000000012C
+:10208000020D001000000001020D0014000000010C
+:10209000020D001800000001020D001C00000001EC
+:1020A000020D002000000001020D002400000001CC
+:1020B000020D002800000001020D002C00000001AC
+:1020C000020D003000000001020D0034000000018C
+:1020D000020D003800000001020D003C000000016C
+:1020E000020D011400000009020D011C0000000A8D
+:1020F000020D012400000000020D012C0000000070
+:10210000020D013400000000020D013C0000000B34
+:10211000020D014400000000020D0118000000291A
+:10212000020D01200000002A020D012800000020FD
+:10213000020D013000000020020D013800000020D7
+:10214000020D01400000002B020D0148000000209C
+:10215000020D011400000019020D011C0000001AFC
+:10216000020D012400000010020D012C00000010DF
+:10217000020D013400000010020D013C0000001BA4
+:10218000020D014400000010020D0118000000398A
+:10219000020D01200000003A020D0128000000306D
+:1021A000020D013000000030020D01380000003047
+:1021B000020D01400000003B020D0148000000300C
+:1021C000020D011400000049020D011C0000004A2C
+:1021D000020D012400000040020D012C000000400F
+:1021E000020D013400000040020D013C0000004BD4
+:1021F000020D014400000040020D011800000069BA
+:10220000020D01200000006A020D0128000000609C
+:10221000020D013000000060020D01380000006076
+:10222000020D01400000006B020D0148000000603B
+:10223000020D011400000059020D011C0000005A9B
+:10224000020D012400000050020D012C000000507E
+:10225000020D013400000050020D013C0000005B43
+:10226000020D014400000050020D01180000007929
+:10227000020D01200000007A020D0128000000700C
+:10228000020D013000000070020D013800000070E6
+:10229000020D01400000007B020D014800000070AB
+:1022A000060E200000000800020E004C0000003264
+:1022B000020E009402150020020E00980215002064
+:1022C000020E009C00000030020E00A0081000006A
+:1022D000020E00A400000036020E00A8000000302C
+:1022E000020E00AC00000031020E00B4000000033A
+:1022F000020E00B800000000020E00C40000000042
+:10230000020E00CC00000006020E00D80000000102
+:10231000020E014400000001020E014C0000000109
+:10232000020E015000000002020E02040000000133
+:10233000020E020C00000040020E021000000040DD
+:10234000020E021C00000004020E02200000002009
+:10235000020E02240000000E020E02280000001BE4
+:10236000060E030000000012040E0280001B04177A
+:10237000060E02EC00000005020E00540000000CE6
+:10238000020E00580000000C020E005C000000006D
+:10239000020E006000000010020E00640000001039
+:1023A000060E006800000003020E00DC00000003BF
+:1023B000020E000400000001020E000800000001EF
+:1023C000020E000C00000001020E001000000001CF
+:1023D000020E001400000001020E001800000001AF
+:1023E000020E001C00000001020E0020000000018F
+:1023F000020E002400000001020E0028000000016F
+:10240000020E002C00000001020E0030000000014E
+:10241000020E003400000001020E0038000000012E
+:10242000020E003C00000001020E0040000000010E
+:10243000020E004400000001020E01100000000F17
+:10244000020E011800000000020E01200000000032
+:10245000020E012800000000020E01140000002FEF
+:10246000020E011C00000020020E012400000020CA
+:10247000020E012C00000020020E01100000001FBF
+:10248000020E011800000010020E012000000010D2
+:10249000020E012800000010020E01140000003F8F
+:1024A000020E011C00000030020E0124000000306A
+:1024B000020E012C00000030020E01100000004F3F
+:1024C000020E011800000040020E01200000004032
+:1024D000020E012800000040020E01140000006FEF
+:1024E000020E011C00000060020E012400000060CA
+:1024F000020E012C00000060020E01100000005FBF
+:10250000020E011800000050020E012000000050D1
+:10251000020E012800000050020E01140000007F8E
+:10252000020E011C00000070020E01240000007069
+:10253000020E012C000000700730040000D60000DD
+:10254000083007D80005043207340000322B0000A1
+:1025500007348000314B0C8B0735000038C518DE7E
+:10256000073580002F90271007360000268F32F5A0
+:102570000836716031D40434023000BC00000030F1
+:1025800001300000000000000130000400000000E5
+:1025900001300008000000000130000C00000000C5
+:1025A00001300010000000000130001400000000A5
+:1025B0000230002000000001023000240000000270
+:1025C00002300028000000030230002C0000000050
+:1025D000023000300000000402300034000000012E
+:1025E00002300038000000000230003C0000000112
+:1025F00002300040000000040230004400000000EF
+:1026000002300048000000010230004C00000003CE
+:1026100002300050000000000230005400000001B1
+:1026200002300058000000040230005C000000008E
+:10263000023000600000000102300064000000036E
+:1026400002300068000000000230006C0000000151
+:10265000023000700000000402300074000000002E
+:1026600002300078000000040230007C000000030B
+:102670000630008000000002023000A400007FFF4E
+:10268000023000A8000003FF023002240000000016
+:1026900002300234000000000230024C0000000052
+:1026A000023002E40000FFFF0630200000000800B6
+:1026B00002338BC000000001023380000000001ACA
+:1026C000023380400000004E023380800000001082
+:1026D000023380C0000000200C33830000086470C7
+:1026E0000A338300000001570B3383000000055FAD
+:1026F0000A338340000000000C33834000000226B0
+:102700000B338340000000010233838000086470B3
+:10271000023383C00000022602331480000000014F
+:102720000A3314800000000006328000000001021D
+:1027300006322008000000C8063220000000000217
+:1027400004328520008F04360632875C00000009C1
+:1027500006323EB00000000606323ED00000000205
+:1027600006323E800000000A04323EA8000204C582
+:1027700006323E00000000200632500000000940F2
+:102780000632400000000004043294C0000204C776
+:1027900006324110000000020632D0000000007036
+:1027A0000632DB00000000D40632DEA0000000028A
+:1027B0000632E00000000800063324000000011883
+:1027C0000632100000000188063250000000002090
+:1027D00006325100000000200632520000000020A6
+:1027E0000632530000000020063254000000002092
+:1027F000063255000000002006325600000000207E
+:102800000632570000000020063258000000002069
+:10281000063259000000002006325A000000002055
+:1028200006325B000000002006325C000000002041
+:1028300006325D000000002006325E00000000202D
+:1028400006325F0000000020063284F00000000223
+:1028500004328500000204C9063285080000000227
+:102860000632DE90000000020633286000000118E6
+:102870000632162000000188063250800000002039
+:1028800006325180000000200632528000000020F5
+:1028900006325380000000200632548000000020E1
+:1028A00006325580000000200632568000000020CD
+:1028B00006325780000000200632588000000020B9
+:1028C000063259800000002006325A8000000020A5
+:1028D00006325B800000002006325C800000002091
+:1028E00006325D800000002006325E80000000207D
+:1028F00006325F8000000020063284F800000002EB
+:1029000004328510000204CB063285180000000254
+:102910000632DE98000000020232845000000000FF
+:102920000632401000000002023284540000000011
+:1029300006324020000000020232845800000000ED
+:1029400006324030000000020232845C00000000C9
+:1029500006324040000000020232846000000000A5
+:102960000632405000000002023284640000000081
+:10297000063240600000000202328468000000005D
+:1029800006324070000000020232846C0000000039
+:10299000063240800000000207200400007300009F
+:1029A00008200780001004CD072400002AE400005E
+:1029B0000724800027670ABA0824D35063FC04CF99
+:1029C000022000BC000000300120000000000000D8
+:1029D00001200004000000000120000800000000A9
+:1029E0000120000C00000000012000100000000089
+:1029F000012000140000000002200020000000015F
+:102A00000220002400000002022000280000000331
+:102A10000220002C00000000022000300000000412
+:102A200002200034000000010220003800000000F5
+:102A30000220003C000000010220004000000004D1
+:102A400002200044000000000220004800000001B5
+:102A50000220004C00000003022000500000000093
+:102A60000220005400000001022000580000000471
+:102A70000220005C00000000022000600000000155
+:102A80000220006400000003022000680000000033
+:102A90000220006C00000001022000700000000411
+:102AA00002200074000000000220007800000004F2
+:102AB0000220007C000000030620008000000002CD
+:102AC000022000A400007FFF022000A8000003FFF6
+:102AD0000220022400000000022002340000000056
+:102AE0000220024C00000000022002E40000FFFF70
+:102AF000062020000000080002238BC00000000117
+:102B00000223800000000010022380400000001219
+:102B10000223808000000030022380C00000000EED
+:102B20000C238300000864700A238300000001570F
+:102B30000B2383000000055F0A2383400000000090
+:102B40000C238340000002260B2383400000000179
+:102B50000223838000086470022383C000000226E1
+:102B600002231480000000010A23148000000000EA
+:102B7000062210000000004206222008000000C8C3
+:102B800006222000000000020622B00000000330F0
+:102B90000622F400000000530422F54C000104D189
+:102BA0000622F550000000030422F55C000104D267
+:102BB0000622F560000000030422F56C000104D336
+:102BC0000622F570000000030422F57C000104D405
+:102BD0000622F580000000030422F58C000104D5D4
+:102BE0000622F590000000030422F59C000104D6A3
+:102BF0000622F5A0000000030422F5AC000104D772
+:102C00000622F5B0000000030422F5BC000104D840
+:102C10000622F5C0000000460622E2000000044043
+:102C200004221240009004D906223000000000C0A7
+:102C30000622670000000100062290000000040048
+:102C400004226B0800200569062211F0000000062E
+:102C50000422120800060589062212200000000244
+:102C600006224000000005C00622C0000000000649
+:102C70000422C0180006058F0622C0300000000A9A
+:102C80000422C058000605950622C0700000000A04
+:102C90000422C0980006059B0622C0B00000000A6E
+:102CA0000422C0D8000605A10622C0F00000000AD8
+:102CB0000422C118000605A70622C1300000000A40
+:102CC0000422C158000605AD0622C1700000000AAA
+:102CD0000422C198000605B30622C1B00000000A14
+:102CE0000422C1D8000605B90622C1F00000000A7E
+:102CF0000422C218000605BF0622C2300000000AE6
+:102D00000422C258000605C50622C2700000000A4F
+:102D10000422C298000605CB0622C2B00000000AB9
+:102D20000422C2D8000605D10622C2F00000000A23
+:102D30000422C318000605D70622C3300000000A8B
+:102D40000422C358000605DD0622C3700000000AF5
+:102D50000422C398000605E30622C3B00000000A5F
+:102D60000422C3D8000605E90622C3F00000000AC9
+:102D70000422C418000605EF0622C4300000000A31
+:102D80000422C458000605F50622C4700000000A9B
+:102D90000422C498000605FB0622C4B00000000A05
+:102DA0000422C4D8000606010622C4F00000000A6E
+:102DB0000422C518000606070622C5300000000AD6
+:102DC0000422C5580006060D0622C5700000000A40
+:102DD0000422C598000606130622C5B00000000AAA
+:102DE0000422C5D8000606190622C5F00000000A14
+:102DF0000422C6180006061F0622C6300000000A7C
+:102E00000422C658000606250622C6700000000AE5
+:102E10000422C6980006062B0622C6B00000000A4F
+:102E20000422C6D8000606310622C6F00000000AB9
+:102E30000422C718000606370622C7300000000A21
+:102E40000422C7580006063D0622C7700000000A8B
+:102E50000422C798000606430622C7B00000000AF5
+:102E60000422C7D8000606490622C7F00000000A5F
+:102E70000422C8180006064F0622C8300000000AC7
+:102E80000422C858000606550622C8700000000A31
+:102E90000422C8980006065B0622C8B00000000A9B
+:102EA0000422C8D8000606610622C8F00000000A05
+:102EB0000422C918000606670622C9300000000A6D
+:102EC0000422C9580006066D0622C9700000000AD7
+:102ED0000422C998000606730622C9B00000000A41
+:102EE0000422C9D8000606790622C9F00000000AAB
+:102EF0000422CA180006067F0622CA300000000A13
+:102F00000422CA58000606850622CA700000000A7C
+:102F10000422CA980006068B0622CAB00000000AE6
+:102F20000422CAD8000606910622CAF00000000A50
+:102F30000422CB18000606970622CB300000000AB8
+:102F40000422CB580006069D0622CB700000000A22
+:102F50000422CB98000606A30622CBB00000000A8C
+:102F60000422CBD8000606A90622CBF00000000AF6
+:102F70000422CC18000606AF0622CC300000000A5E
+:102F80000422CC58000606B50622CC700000000AC8
+:102F90000422CC98000606BB0622CCB00000000A32
+:102FA0000422CCD8000606C10622CCF00000000A9C
+:102FB0000422CD18000606C70622CD300000000A04
+:102FC0000422CD58000606CD0622CD700000000A6E
+:102FD0000422CD98000606D30622CDB00000000AD8
+:102FE0000422CDD8000606D90622CDF00000000A42
+:102FF0000422CE18000606DF0622CE300000000AAA
+:103000000422CE58000606E50622CE700000000A13
+:103010000422CE98000606EB0622CEB00000000A7D
+:103020000422CED8000606F10622CEF00000000AE7
+:103030000422CF18000606F70622CF300000000A4F
+:103040000422CF58000606FD0622CF700000000AB9
+:103050000422CF98000607030622CFB00000000A22
+:103060000422CFD8000607090622CFF00000000A8C
+:103070000422D0180006070F0622D0300000000AF4
+:103080000422D058000607150622D0700000000A5E
+:103090000422D0980006071B0622D0B00000000AC8
+:1030A0000422D0D8000607210622D0F00000000A32
+:1030B0000422D118000607270622D1300000000A9A
+:1030C0000422D1580006072D0622D1700000000A04
+:1030D0000422D198000607330622D1B00000000A6E
+:1030E0000422D1D8000607390622D1F00000000AD8
+:1030F0000422D2180006073F0622D2300000000A40
+:103100000422D258000607450622D2700000000AA9
+:103110000422D2980006074B0622D2B00000000A13
+:103120000422D2D8000607510622D2F00000000A7D
+:103130000422D318000607570622D3300000000AE5
+:103140000422D3580006075D0622D3700000000A4F
+:103150000422D398000607630622D3B00000000AB9
+:103160000422D3D8000607690622D3F00000000A23
+:103170000422D4180006076F0622D4300000000A8B
+:103180000422D458000607750622D4700000000AF5
+:103190000422D4980006077B0622D4B00000000A5F
+:1031A0000422D4D8000607810622D4F00000000AC9
+:1031B0000422D518000607870622D5300000000A31
+:1031C0000422D5580006078D0622D5700000000A9B
+:1031D0000422D598000607930622D5B00000000A05
+:1031E0000422D5D8000607990622D5F00000000A6F
+:1031F0000422D6180006079F0622D6300000000AD7
+:103200000422D658000607A50622D6700000000A40
+:103210000422D698000607AB0622D6B00000000AAA
+:103220000422D6D8000607B10622D6F00000000A14
+:103230000422D718000607B70622D7300000000A7C
+:103240000422D758000607BD0622D7700000000AE6
+:103250000422D798000607C30622D7B00000000A50
+:103260000422D7D8000607C90622D7F00000000ABA
+:103270000422D818000607CF0622D8300000000A22
+:103280000422D858000607D50622D8700000000A8C
+:103290000422D898000607DB0622D8B00000000AF6
+:1032A0000422D8D8000607E10622D8F00000000A60
+:1032B0000422D918000607E70622D9300000000AC8
+:1032C0000422D958000607ED0622D9700000000A32
+:1032D0000422D998000607F30622D9B00000000A9C
+:1032E0000422D9D8000607F90622D9F00000000A06
+:1032F0000422DA18000607FF0622DA300000000A6E
+:103300000422DA58000608050622DA700000000AD6
+:103310000422DA980006080B0622DAB00000000A40
+:103320000422DAD8000608110622DAF00000000AAA
+:103330000422DB18000608170622DB300000000A12
+:103340000422DB580006081D0622DB700000000A7C
+:103350000422DB98000608230622DBB00000000AE6
+:103360000422DBD8000608290622DBF00000000A50
+:103370000422DC180006082F0622DC300000000AB8
+:103380000422DC58000608350622DC700000000A22
+:103390000422DC980006083B0622DCB00000000A8C
+:1033A0000422DCD8000608410622DCF00000000AF6
+:1033B0000422DD18000608470622DD300000000A5E
+:1033C0000422DD580006084D0622DD700000000AC8
+:1033D0000422DD98000608530622DDB00000000A32
+:1033E0000422DDD8000608590622DDF00000000A9C
+:1033F0000422DE180006085F0622DE300000000A04
+:103400000422DE58000608650622DE700000000A6D
+:103410000422DE980006086B0622DEB00000000AD7
+:103420000422DED8000608710622DEF00000000A41
+:103430000422DF18000608770622DF300000000AA9
+:103440000422DF580006087D0622DF700000000A13
+:103450000422DF98000608830622DFB00000000A7D
+:103460000422DFD8000608890622DFF00000000AE7
+:103470000422E0180006088F0622E0300000000A4F
+:103480000422E058000608950622E0700000000AB9
+:103490000422E0980006089B0622E0B00000000A23
+:1034A0000422E0D8000608A10622E0F00000000A8D
+:1034B0000422E118000608A70622E1300000000AF5
+:1034C0000422E158000608AD0622E1700000000A5F
+:1034D0000422E198000608B30622E1B00000000AC9
+:1034E0000422E1D8000608B90622E1F00000000439
+:1034F0000622153800000002062211E80000000232
+:103500000622F3000000000802221148000000001B
+:1035100006225900000000060622330000000002C7
+:1035200006226040000000300622F3200000000860
+:103530000222114C0000000006225918000000066B
+:10354000062233080000000206226100000000305D
+:103550000622F34000000008022211500000000083
+:103560000622593000000006062233100000000237
+:10357000062261C0000000300622F360000000084F
+:1035800002221154000000000622594800000006E3
+:10359000062233180000000206226280000000307C
+:1035A0000622F380000000080222115800000000EB
+:1035B00006225960000000060622332000000002A7
+:1035C00006226340000000300622F3A0000000083D
+:1035D0000222115C0000000006225978000000065B
+:1035E000062233280000000206226400000000309A
+:1035F0000622F3C000000008022211600000000053
+:103600000622599000000006062233300000000216
+:10361000062264C0000000300622F3E0000000082B
+:103620000222116400000000062259A800000006D2
+:1036300006223338000000020622658000000030B8
+:103640000216100000000028021700080000000207
+:103650000217002C000000030217003C00000004C9
+:10366000021700440000000002170048000000029A
+:103670000217004C0000009002170050000000905C
+:103680000217005400800090021700580810000034
+:10369000021700700000000602170078000009FF02
+:1036A0000217007C0000076C021701C4081000001C
+:1036B0000217034400000001021704000000008A02
+:1036C00002170404000000800217040800000081B3
+:1036D0000217040C00000080021704100000008A8A
+:1036E0000217041400000080021704180000008173
+:1036F0000217041C00000080021704300000008A3A
+:103700000217043400000080021704380000008112
+:103710000217043C00000080021704400000008AE9
+:1037200002170444000000800217044800000081D2
+:103730000217044C00000080021704800000008A79
+:103740000217048400000080021704880000008132
+:103750000217048C0000008002170038007C10045F
+:10376000021700040000000F021701EC0000000225
+:10377000021701F400000002021701EC0000000231
+:10378000021701F400000002021701EC0000000221
+:10379000021701F400000002021701EC0000000211
+:1037A000021701F400000002021701EC0000000201
+:1037B000021701F400000002021701EC00000002F1
+:1037C000021701F400000002021701EC00000002E1
+:1037D000021701F400000002021701EC00000002D1
+:1037E000021701F400000002061640240000000247
+:1037F000021640700000001C021642080000000182
+:1038000002164210000000010216422000000001D2
+:10381000021642280000000102164230000000019A
+:103820000216423800000001021642600000000249
+:103830000C16401C0003D0900A16401C0000009C8F
+:103840000B16401C000002710216403000000028D8
+:10385000021640340000002C0216403800000030F0
+:103860000216404400000020021640000000000143
+:10387000021640D8000000010216400800000001B6
+:103880000216400C0000000102164010000000016A
+:1038900002164240000000000216424800000000EC
+:1038A000061642700000000202164250000000009E
+:1038B0000216425800000000061642800000000276
+:1038C00002166008000012140216600C00001200BC
+:1038D00002166010000012040216601C0000FFFFB8
+:1038E000021660200000FFFF021660240000FFFFA8
+:1038F000021660280000FFFF02166038000000205A
+:103900000216603C00000010061660400000000235
+:1039100002166048000000230216604C00000024DC
+:1039200002166050000000250216605400000026B8
+:1039300002166058000000270216605C00000011AB
+:103940000216606000000000021660640000002B98
+:10395000021660680000002C0216606C0000002D4A
+:1039600002166070000000EC021660740000000097
+:1039700002166078000000290216607C0000002A10
+:10398000021660800000002F061660840000000D03
+:10399000021660B800000001061660BC00000008B6
+:1039A000021660DC00000001061660E00000000462
+:1039B000021660F000000001061660F4000000032B
+:1039C0000216610000000001061661040000002DCF
+:1039D000021661B800000001061661BC0000000874
+:1039E000021661DC00000001061661E00000000420
+:1039F000021661F000000001061661F400000003E9
+:103A00000216620000000001061662040000000DAC
+:103A10000216623807FFFFFF0216623C0000007FBB
+:103A20000216624007FFFFFF021662440000003FDB
+:103A300001166248000000000116624C0000000000
+:103A400001166250000000000116625400000000E0
+:103A500001166258000000000116625C00000000C0
+:103A600001166260000000000116626400000000A0
+:103A700001166268000000000116626C0000000080
+:103A80000116627000000000011662740000000060
+:103A900001166278000000000116627C0000000040
+:103AA000011662D400000000021662D80000FFFF79
+:103AB000021662DC0000FFFF021662E00000FFFF5A
+:103AC000021662E40000FFFF0C166000000003E82D
+:103AD0000A166000000000010B16600000000003E1
+:103AE0000216804000000006021680440000000517
+:103AF000021680480000000A0216804C00000005F3
+:103B00000216805400000002021680CC000000045F
+:103B1000021680D000000004021680D400000004C9
+:103B2000021680D800000004021680DC00000004A9
+:103B3000021680E000000004021680E40000000489
+:103B4000021680E800000004021688040000000647
+:103B5000021680300000007C021680340000003D18
+:103B6000021680380000003F0216803C0000009CD6
+:103B70000216E6E8000060000216E6EC00006000B5
+:103B80000216E6F0000060000216E6F40000600095
+:103B900002168234000025E40216823800008000FC
+:103BA00002168094000025E3021681F400000C0840
+:103BB000021681F800000040021681FC000001009E
+:103BC0000216820000000020021682040000001786
+:103BD00002168208000000800216820C000002001B
+:103BE00002168210000000000216823C0000001342
+:103BF00002168220008F008F0216821C008F008F19
+:103C0000021680F0000000070216821801FF01FF73
+:103C10000216821401FF01FF061680F40000000264
+:103C20000216811C0000000502168120000000051C
+:103C300002168124000000050216812800000008F9
+:103C40000216812C000000060216813000000007D9
+:103C50000616813400000004021680FC00000000FB
+:103C600006168144000000020216814C0000000488
+:103C7000021681500000000102168154000000026B
+:103C800002168158000000050216815C0000000544
+:103C90000216816000000005021681640000000524
+:103CA0000216816800000008021681000000000072
+:103CB0000216816C000000060216817000000007E9
+:103CC00006168174000000060216818C00000004B4
+:103CD000021681900000000102168104000000001D
+:103CE000021681940000000202168198000000056F
+:103CF0000216819C00000005021681A0000000054C
+:103D0000021681A400000005021681A80000000828
+:103D1000021681AC00000006021681B00000000708
+:103D2000061681B40000000202168108000000009F
+:103D3000061681BC00000004021681CC00000004BD
+:103D4000021681D000000001021681D4000000029A
+:103D5000021681D800000005021681DC0000000573
+:103D6000021681E0000000050216810C000000042C
+:103D7000021681E400000005021681E80000000838
+:103D8000021681EC00000006021681F00000000718
+:103D900002168110000000010216811400000002CA
+:103DA00002168118000000050216809C0000004CDD
+:103DB000021680A00000004C061680C4000000021D
+:103DC000021680A400000000021680A80000000077
+:103DD000021680AC0000004C061680B00000000502
+:103DE0000216E6F80000020402168240003F003F7F
+:103DF00002168244003F003F061682900000000435
+:103E000002168248008000800216824C00800080EA
+:103E100002168250010001000216825401000100C6
+:103E20000616825800000002021682600040004020
+:103E30000216826400400040021682681E001E00C6
+:103E40000216826C1E001E000216827040004000A6
+:103E500002168274400040000216827880008000C2
+:103E60000216827C800080000216828020002000E2
+:103E700002168284200020000616828800000002BC
+:103E8000021680900000004B021680600000014086
+:103E900002168064000001400616808800000002BF
+:103EA00002168068000000000216806C000000000E
+:103EB00002168070000000C0061680740000000525
+:103EC0000216880C0101010102168810010120046C
+:103ED000021688142008100102168818010101201A
+:103EE0000216881C0101010102168820010120042C
+:103EF00002168824200810010216882801010120DA
+:103F00000216882C200810010216883001010120B9
+:103F100002168834010101010216883801012004CB
+:103F20000216883C20081001021688400101012079
+:103F3000021688440101010102168848010120048B
+:103F40000216E6BC000000000216E6C000000002F7
+:103F50000216E6C4000000040216E6C800000006CF
+:103F60000216E79400000001021680EC000000FF3A
+:103F700002140000000000010215C024000000002F
+:103F80000215C0EC000000010215C0F000000001A5
+:103F90000615C10000000002021400040000000128
+:103FA00002140008000000010214000C00000001CF
+:103FB000021400300000000102140034000000016F
+:103FC0000214004000000001021400440000FFFF42
+:103FD00006140004000000030214000000000000AA
+:103FE000060280000000200002020058000000329B
+:103FF000020200A003150020020200A40315002005
+:10400000020200A801000030020200AC081000000B
+:10401000020200B000000036020200B400000030CE
+:10402000020200B800000031020200BC00000002E1
+:10403000020200C000000005020200C400000002ED
+:10404000020200C800000002020200D000000007C7
+:10405000020200DC00000000020200E00000000597
+:10406000020200E400000003020200F00000000170
+:10407000020200FC00000006020201200000000015
+:104080000202013400000002020201B0000000013F
+:104090000202020C000000010202021400000001F2
+:1040A00002020218000000020202040400000001E3
+:1040B0000202040C00000040020204100000004054
+:1040C0000202041C00000004020204200000002080
+:1040D0000202042400000002020204280000002062
+:1040E000060205000000001204020480002008BF40
+:1040F000020200600000000F0202006400000007DE
+:1041000002020068000000000202006C0000000EC5
+:10411000020200700000000E06020074000000039E
+:10412000020200F40000000402020004000000018A
+:1041300002020008000000010202000C0000000161
+:104140000202001000000001020200140000000141
+:1041500002020018000000010202001C0000000121
+:104160000202002000000001020200240000000101
+:1041700002020028000000010202002C00000001E1
+:1041800002020030000000010202003400000001C1
+:1041900002020038000000010202003C00000001A1
+:1041A0000202004000000001020200440000000181
+:1041B00002020048000000010202004C0000000161
+:1041C000020200500000000102020108000000C8C5
+:1041D0000202011800000002020201C400000000F7
+:1041E000020201CC00000000020201D40000000223
+:1041F000020201DC00000002020201E4000000FFF4
+:10420000020201EC000000FF0202010000000000B9
+:104210000202010C000000C80202011C00000002A2
+:10422000020201C800000000020201D000000000EC
+:10423000020201D800000002020201E000000002B8
+:10424000020201E8000000FF020201F0000000FF8E
+:10425000020201040000002002020108000000C860
+:104260000202011800000002020201C40000000066
+:10427000020201CC00000000020201D40000000292
+:10428000020201DC00000002020201E4000000FF63
+:10429000020201EC000000FF020201000000001019
+:1042A0000202010C000000C80202011C0000000212
+:1042B000020201C800000000020201D0000000005C
+:1042C000020201D800000002020201E00000000228
+:1042D000020201E8000000FF020201F0000000FFFE
+:1042E000020201040000003002020108000000C8C0
+:1042F0000202011800000002020201C400000000D6
+:10430000020201CC00000000020201D40000000201
+:10431000020201DC00000002020201E4000000FFD2
+:10432000020201EC000000FF020201000000004058
+:104330000202010C000000C80202011C0000000281
+:10434000020201C800000000020201D000000000CB
+:10435000020201D800000002020201E00000000297
+:10436000020201E8000000FF020201F0000000FF6D
+:10437000020201040000006002020108000000C8FF
+:104380000202011800000002020201C40000000045
+:10439000020201CC00000000020201D40000000271
+:1043A000020201DC00000002020201E4000000FF42
+:1043B000020201EC000000FF0202010000000050B8
+:1043C0000202010C000000C80202011C00000002F1
+:1043D000020201C800000000020201D0000000003B
+:1043E000020201D800000002020201E00000000207
+:1043F000020201E8000000FF020201F0000000FFDD
+:1044000002020104000000700728040000B300004D
+:10441000082807B8000908DF072C000028CB000097
+:10442000072C8000365D0A33072D0000347017CB4F
+:10443000072D80003A9424E8072E000036C7338EFB
+:10444000072E80001CE94140082EC5D0274608E110
+:10445000022800BC0000003001280000000000001D
+:1044600001280004000000000128000800000000EE
+:104470000128000C000000000128001000000000CE
+:1044800001280014000000000228002000000001A4
+:104490000228002400000002022800280000000377
+:1044A0000228002C00000000022800300000000458
+:1044B000022800340000000102280038000000003B
+:1044C0000228003C00000001022800400000000417
+:1044D00002280044000000000228004800000001FB
+:1044E0000228004C000000030228005000000000D9
+:1044F00002280054000000010228005800000004B7
+:104500000228005C0000000002280060000000019A
+:104510000228006400000003022800680000000078
+:104520000228006C00000001022800700000000456
+:104530000228007400000000022800780000000437
+:104540000228007C00000003062800800000000212
+:10455000022800A400007FFF022800A8000003FF3B
+:10456000022802240000000002280234000000009B
+:104570000228024C00000000022802E40000FFFFB5
+:104580000628200000000800022B8BC0000000015C
+:10459000022B800000000000022B80400000001869
+:1045A000022B80800000000C022B80C000000066FF
+:1045B0000C2B8300000864700A2B83000000015755
+:1045C0000B2B83000000055F0A2B834000000000D6
+:1045D0000C2B8340000002260B2B834000000001BF
+:1045E000022B838000086470022B83C00000022627
+:1045F000022B1480000000010A2B14800000000030
+:10460000022B944000000001062B94480000000299
+:10461000062A9A7000000004042A9A80000408E325
+:10462000062A9A9000000002042A9A98000208E7DD
+:10463000062A900000000048062A2008000000C852
+:10464000062A200000000002062A912800000086A9
+:10465000062AC00000000120062A9348000000033B
+:10466000042A9354000108E9062A9FB000000002C2
+:10467000042A9418000208EA042A9CD0000108ECDD
+:10468000062A9CD400000011042A9D20008F08ED0A
+:10469000062A9F5C00000005042A30000002097C05
+:1046A000062A300800000100062A404000000010E1
+:1046B000042A40000010097E042A84080002098EA2
+:1046C000042ACF4000040990042ACF600002099414
+:1046D000062A9FA000000004062A60000000054092
+:1046E000062A9D1800000002062AB00000000050B3
+:1046F000062ABB7000000070062ABB68000000029A
+:10470000062AB94800000004062AD000000008006C
+:10471000062AC48000000150062A942000000032BE
+:10472000062A502000000002062A50300000000235
+:10473000062A500000000002062A50100000000265
+:10474000022A520800000001042A9AA000020996D9
+:10475000062A95B000000022042A96380001099824
+:10476000062A963C00000003062A96E0000000227C
+:10477000042A976800010999062A976C0000000333
+:10478000062A981000000022042A98980001099A2D
+:10479000062A989C00000003062A99400000002287
+:1047A000042A99C80001099B062A99CC000000033D
+:1047B000062ABB5800000002062AC9C000000150AA
+:1047C000062A94E800000032062A50280000000261
+:1047D000062A503800000002062A50080000000295
+:1047E000062A501800000002022A520C00000001A4
+:1047F000042A9AA80002099C062A96480000002272
+:10480000042A96D00001099E062A96D400000003CF
+:10481000062A977800000022042A98000001099FC8
+:10482000062A980400000003062A98A80000002227
+:10483000042A9930000109A0062A993400000003D7
+:10484000062A99D800000022042A9A60000109A1D2
+:10485000062A9A6400000003062ABB6000000002DA
+:10486000022ACF0000000000042A9AB0001009A21A
+:10487000062A50480000000E022ACF040000000063
+:10488000042A9AF0001009B2062A50800000000E97
+:10489000022ACF0800000000042A9B30001009C241
+:1048A000062A50B80000000E022ACF0C00000000BB
+:1048B000042A9B70001009D2062A50F00000000E56
+:1048C000022ACF1000000000042A9BB0001009E269
+:1048D000062A51280000000E022ACF140000000012
+:1048E000042A9BF0001009F2062A51600000000E15
+:1048F000022ACF1800000000042A9C3000100A028F
+:10490000062A51980000000E022ACF1C0000000069
+:10491000042A9C7000100A12062A51D00000000ED2
+:1049200002101008000000010210105000000001E9
+:10493000021010000003D000021010040000003D1F
+:104940000910180002000A220910110000100C22A0
+:1049500006101140000000080910116000100C3210
+:10496000061011A00000001806102400000000E04E
+:104970000210201C00000000021020200000000196
+:10498000021020C0000000020210200400000001FC
+:104990000210200800000001021030D800000001C1
+:1049A00009103C0000050C420910380000050C47B6
+:1049B0000910392000050C4C09103B0000050C5172
+:1049C000021040D400000030021040D80000003037
+:1049D00006104C00000001000210402800000010EA
+:1049E0000210404400003FFF021040580028000021
+:1049F000021040840084924A0210405800000000D7
+:104A0000021041380000000102104138000000018E
+:104A1000021041380000000102104138000000017E
+:104A2000021041380000000102104138000000016E
+:104A3000021041380000000102104138000000015E
+:104A40000212049001F680400212051400003C108E
+:104A500002120494FFFFFFFF02120498FFFFFFFF02
+:104A60000212049CFFFFFFFF021204A0FFFFFFFFE2
+:104A7000021204A4FFFFFFFF021204A8FFFFFFFFC2
+:104A8000021204ACFFFFFFFF021204B0FFFFFFFFA2
+:104A9000021204B8FFFFFFFF021204BCFFFFFFFF7A
+:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
+:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
+:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
+:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
+:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
+:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
+:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
+:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
+:104B200002120504FFFFFFFF02120508FFFFFFFF4F
+:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
+:104B4000021204D4F800C000021204B4F0005000B5
+:104B500002120390000000080212039C00000008EB
+:104B6000021203A000000008021203A400000002C9
+:104B7000021203BC00000004021203C00000000582
+:104B8000021203C400000004021203D0000000005F
+:104B90000212036C00000001021201BC0000004080
+:104BA000021201C000001808021201C4000008032C
+:104BB000021201C800000803021201CC00000040EC
+:104BC000021201D000000003021201D40000080309
+:104BD000021201D800000803021201DC00000803E1
+:104BE000021201E000010003021201E400000803C8
+:104BF000021201E800000803021201EC00000003A9
+:104C0000021201F000000003021201F40000000390
+:104C1000021201F800000003021201FC0000000370
+:104C2000021202000000000302120204000000034E
+:104C300002120208000000030212020C000000032E
+:104C4000021202100000000302120214000000030E
+:104C500002120218000000030212021C00000003EE
+:104C600002120220000000030212022400000003CE
+:104C700002120228000024030212022C0000002F5E
+:104C80000212023000000009021202340000001972
+:104C900002120238000001840212023C000001836B
+:104CA0000212024000000306021202440000001932
+:104CB00002120248000000060212024C0000030625
+:104CC0000212025000000306021202540000030602
+:104CD0000212025800000C860212025C0000030659
+:104CE00002120260000003060212026400000006C5
+:104CF00002120268000000060212026C00000006A8
+:104D00000212027000000006021202740000000687
+:104D100002120278000000060212027C0000000667
+:104D20000212028000000006021202840000000647
+:104D300002120288000000060212028C0000000627
+:104D40000212029000000006021202940000000607
+:104D500002120298000000060212029C00000006E7
+:104D6000021202A000000306021202A400000013B7
+:104D7000021202A800000006021202B00000100495
+:104D8000021202B400001004021203240010644056
+:104D90000212032800106440021205B40000000152
+:104DA000021205F800000040021205FC0000001984
+:104DB00002120600000000010212066C0000000151
+:104DC000021201B000000001021207D80000000327
+:104DD000021207D800000003021207D800000003E7
+:104DE000021207D800000003021207D800000003D7
+:104DF000021207D800000003021207D800000003C7
+:104E0000021207D8000000030600A0000000000CFA
+:104E10000200A050000000000200A05400000000AA
+:104E20000200A0EC555400000200A0F05555555565
+:104E30000200A0F4000055550200A0F8F0000000A8
+:104E40000200A0FC555400000200A1005555555524
+:104E50000200A104000055550200A108F000000066
+:104E60000200A19C000000000200A1A000010000BF
+:104E70000200A1A4000050140200A1A8000000003C
+:104E80000200A6A8000000000200A6AC000000007E
+:104E90000200A6D0000000000200A45C00000C008C
+:104EA0000200A61C000000030200A070FFF55FFFD7
+:104EB0000200A0740000FFFF0200A078F00003E0F1
+:104EC0000200A07C000000000200A0800000A00002
+:104ED0000600A084000000050200A0980FE000007A
+:104EE0000600A09C000000070200A0B8000004001B
+:104EF0000600A0BC000000030200A0C800001000D3
+:104F00000600A0CC000000030200A0D80000400072
+:104F10000600A0DC000000030200A0E80001000081
+:104F20000600A22C000000040200A688000000FC7D
+:104F30000600A68C000000070200A6F40000000096
+:104F40000200A10CFF5C00000200A110FFF55FFF52
+:104F50000200A1140000FFFF0200A118F00003E00E
+:104F60000200A11C000000000200A1200000A0001F
+:104F70000600A124000000050200A1380FE0000097
+:104F80000600A13C000000070200A1580000080034
+:104F90000600A15C000000030200A16800002000E0
+:104FA0000600A16C000000030200A1780000800050
+:104FB0000600A17C000000030200A188000200009E
+:104FC0000600A23C000000040200A6B0000000FCA5
+:104FD0000600A6B4000000070200A6F800000000CA
+:104FE0000200A030000000000200A0340000000019
+:104FF0000200A038000000000200A03C00000000F9
+:105000000200A040000000000200A04400000000D8
+:105010000200A048000000000200A04C00000000B8
+:10502000020090C40000E000020090CC0000F300F9
+:10503000020090D400000003020091A000000001D3
+:105040000600917000000003020090EC0000600078
+:10505000020090F400007300020090FC00000003C6
+:10506000020091A8000000010600918800000003E2
+:10507000020091000000400002009108000053006F
+:105080000200911000000004020091AC0000000139
+:1050900006009194000000020200919C00000001B3
+:1050A000020090D800006000020090E00000730051
+:1050B000020090E800000003020091A4000000013B
+:1050C0000200917C000000010200918000000001BC
+:1050D00002009184000000000200912800000300FB
+:1050E0000200916C0003F0080200912C0000030004
+:1050F0000200913000000300020091340000030020
+:1051000002009138000003000200913C00000300FF
+:1051100002009140000003000200942C00000001F6
+:1051200002009430000000010200943400000001ED
+:105130000200942C000000010200943000000001E5
+:1051400002009434000000010200942C00000001D1
+:1051500002009430000000010200943400000001BD
+:105160000200942C000000010200943000000001B5
+:1051700002009434000000010200942C00000001A1
+:10518000020094300000000102009434000000018D
+:105190000200942C00000001020094300000000185
+:1051A00002009434000000010200942C0000000171
+:1051B000020094300000000102009434000000015D
+:1051C0000200942C00000001020094300000000155
+:1051D0000200943400000001021300780000003047
+:1051E0000213003C000061A8061301080000000340
+:1051F000021301040000000002130134000000004B
+:10520000061301080000000302130104000000005F
+:10521000021301340000000006130108000000031F
+:10522000021301040000000002130134000000001A
+:10523000061301080000000302130104000000002F
+:1052400002130134000000000613010800000003EF
+:1052500002130104000000000213013400000000EA
+:1052600006130108000000030213010400000000FF
+:1052700002130134000000000613010800000003BF
+:1052800002130104000000000213013400000000BA
+:1052900006130108000000030213010400000000CF
+:1052A0000213013400000000021100B800000001E8
+:1052B0000216E6E8000020000216E6EC00002000DE
+:1052C0000216E6F0000065550216E6F4000065558A
+:1052D00002168150000000000216817400000001D7
+:1052E00002168178000000010216817C0000000196
+:1052F0000216818000000001021681840000000176
+:105300000216818800000001021681B4000000012D
+:10531000021681B800000001021681BC00000001E5
+:10532000021681C000000001021681C400000001C5
+:10533000021681C800000001021681100000000062
+:105340000216824000BF00BF061682440000000221
+:105350000216824C00BF00BF0216E6C40000000126
+:105360000216E6C8000000030216E79400000000E1
+:10537000042ACF40000A0C56000000000000000084
+:1053800000000034000000000000000000000000E9
+:10539000000000000000000000000000000000000D
+:1053A0000000000000000000000000000034003594
+:1053B00000000000000000000000000000000000ED
+:1053C00000000000000000000000000000000000DD
+:1053D0000000000000000000003500600000000038
+:1053E00000000000000000000000000000000000BD
+:1053F00000000000000000000000000000000000AD
+:1054000000000000006000910000000000000000AB
+:1054100000910095009500990099009D009D00A1C4
+:1054200000A100A500A500A900A900AD00AD00B134
+:1054300000B100B500000000000000000000000006
+:10544000000000000000000000000000000000005C
+:1054500000000000000000000000000000B5031183
+:105460000311031B031B03250325032C032C033308
+:105470000333033A033A0341034103480348034F0C
+:10548000034F03560356035D0000000000000000B8
+:10549000000000000000000000000000000000000C
+:1054A00000000000000000000000000000000000FC
+:1054B00000000000000000000000000000000000EC
+:1054C00000000000000000000000000000000000DC
+:1054D00000000000000000000000000000000000CC
+:1054E00000000000000000000000000000000000BC
+:1054F00000000000000000000000000000000000AC
+:10550000000000000000000000000000000000009B
+:10551000000000000000000000000000000000008B
+:10552000000000000000000000000000000000007B
+:105530000000000000000000035D035E00000000AA
+:1055400000000000035E035F035F0360036003610C
+:10555000036103620362036303630364036403651B
+:10556000036503660000000000000000000000006A
+:10557000000000000000000000000000000000002B
+:10558000000000000000000000000000000000001B
+:105590000366036D036D0379037903850000000042
+:1055A00000000000000000000000000000000000FB
+:1055B00000000000000000000000000000000000EB
+:1055C00000000000000000000000000000000000DB
+:1055D00000000000000000000000000000000000CB
+:1055E00000000000000000000385038600000000AA
+:1055F00000000000000000000000000000000000AB
+:10560000000000000000000000000000000000009A
+:1056100000000000038603B100000000000000004D
+:10562000000000000000000000000000000000007A
+:10563000000000000000000000000000000000006A
+:1056400003B103E0000000000000000000000000C3
+:10565000000000000000000000000000000000004A
+:1056600000000000000000000000000003E0040F44
+:105670000000000000000000040F04160416041DC2
+:10568000041D04240424042B042B043204320439A2
+:1056900004390440044004470447047A0000000031
+:1056A00000000000047A047E047E048204820486E2
+:1056B0000486048A048A048E048E0492049204965A
+:1056C0000496049A049A04EA04EA05000500051603
+:1056D000051605180518051A051A051C051C051ED2
+:1056E000051E052005200522052205240524052682
+:1056F00005260693000000000000000006930698AF
+:105700000698069D069D06A206A206A706A706AC59
+:1057100006AC06B106B106B606B606BB06BB06BCAD
+:105720000000000000000000000000000000000079
+:105730000000000000000000000000000000000069
+:10574000000000000000000006BC06E000000000B1
+:105750000000000006E006E206E206E406E406E6D3
+:1057600006E606E806E806EA06EA06EC06EC06EEB9
+:1057700006EE06F006F00705070507080708070B01
+:105780000000000000000000000000000000000019
+:105790000000000000000000000000000000000009
+:1057A000070B074F00000000000000000000000091
+:1057B00000000000000000000000000000000000E9
+:1057C000000000000000000000000000074F07E19B
+:1057D00000000000000000000000000000000000C9
+:1057E00000000000000000000000000000000000B9
+:1057F000000000000000000007E107EF00000000CB
+:105800000000000000000000000000000000000098
+:105810000000000000000000000000000000000088
+:105820000000000007EF082C00000000000000004E
+:10583000082C08350835083E083E08470847085038
+:1058400008500859085908620862086B086B087408
+:10585000087408D508D508EA08EA08FF08FF090215
+:1058600009020905090509080908090B090B090EB0
+:10587000090E09110911091409140917091709203A
+:105880000000000000000000000000000000000018
+:105890000000000000000000000000000000000008
+:1058A00000000000000000000920092600000000A0
+:1058B00000000000000000000000000000000000E8
+:1058C00000000000000000000000000000000000D8
+:1058D000000000000926092B000000000000000065
+:1058E00000000000000000000000000000000000B8
+:1058F00000000000000000000000000000000000A8
+:10590000092B0933000000000000000009330934AE
+:10591000093409350935093609360937093709388F
+:10592000093809390939093A093A093B00000000E8
+:105930000000000000000000000000000000000067
+:105940000000000000000000000000000000000057
+:105950000000000000000000093B09AC000000004E
+:105960000000000009AC09AD09AD09AE09AE09AFF0
+:1059700009AF09B009B009B109B109B209B209B357
+:1059800009B309B409B409C809C809DB09DB09EF7F
+:1059900009EF09F009F009F109F109F209F209F337
+:1059A00009F309F409F409F509F509F609F609F707
+:1059B00009F70A1600000000000000000A160A1984
+:1059C0000A190A1C0A1C0A1F0A1F0A220A220A258F
+:1059D0000A250A280A280A2B0A2B0A2E0A2E0A3020
+:1059E00000000000000000000A300A330A330A36C3
+:1059F0000A360A390A390A3C0A3C0A3F0A3F0A4277
+:105A00000A420A450A450A480A480A4900000000B5
+:105A10000000000000000000000000000000000086
+:105A20000000000000000000000000000000000076
+:105A3000000000000A490A610000000000000000A8
+:105A40000000000000000000000000000000000056
+:105A50000000000000000000000000000000000046
+:105A60000A610A620000000000000000000000005F
+:105A70000000000000000000000000000000000026
+:105A80000000000000000000000000000000000016
+:105A9000000100000002070000030E0000041500D2
+:105AA00000051C000006230000072A000008310042
+:105AB00000093800000A3F00000B4600000C4D00B2
+:105AC000000D5400000E5B00000F62000010690022
+:105AD000001170000012770000137E000014850092
+:105AE00000158C000016930000179A000018A10002
+:105AF0000019A800001AAF00001BB600001CBD0072
+:105B0000001DC400001ECB00001FD2000000D90001
+:105B10000000200000004000000060000000800045
+:105B20000000A0000000C0000000E0000001000034
+:105B30000001200000014000000160000001800021
+:105B40000001A0000001C0000001E0000002000010
+:105B500000022000000240000002600000028000FD
+:105B60000002A0000002C0000002E00000030000EC
+:105B700000032000000340000003600000038000D9
+:105B80000003A0000003C0000003E00000040000C8
+:105B900000042000000440000004600000048000B5
+:105BA0000004A0000004C0000004E00000050000A4
+:105BB0000005200000054000000560000005800091
+:105BC0000005A0000005C0000005E0000006000080
+:105BD000000620000006400000066000000680006D
+:105BE0000006A0000006C0000006E000000700005C
+:105BF0000007200000074000000760000007800049
+:105C00000007A0000007C0000007E0000008000037
+:105C10000008200000084000000860000008800024
+:105C20000008A0000008C0000008E0000009000013
+:105C30000009200000094000000960000009800000
+:105C40000009A0000009C0000009E000000A0000EF
+:105C5000000A2000000A4000000A6000000A8000DC
+:105C6000000AA000000AC000000AE000000B0000CB
+:105C7000000B2000000B4000000B6000000B8000B8
+:105C8000000BA000000BC000000BE000000C0000A7
+:105C9000000C2000000C4000000C6000000C800094
+:105CA000000CA000000CC000000CE000000D000083
+:105CB000000D2000000D4000000D6000000D800070
+:105CC000000DA000000DC000000DE000000E00005F
+:105CD000000E2000000E4000000E6000000E80004C
+:105CE000000EA000000EC000000EE000000F00003B
+:105CF000000F2000000F4000000F6000000F800028
+:105D0000000FA000000FC000000FE0000010000016
+:105D10000010200000104000001060000010800003
+:105D20000010A0000010C0000010E00000110000F2
+:105D300000112000001140000011600000118000DF
+:105D40000011A0000011C0000011E00000120000CE
+:105D500000122000001240000012600000128000BB
+:105D60000012A0000012C0000012E00000130000AA
+:105D70000013200000134000001360000013800097
+:105D80000013A0000013C0000013E0000014000086
+:105D90000014200000144000001460000014800073
+:105DA0000014A0000014C0000014E0000015000062
+:105DB000001520000015400000156000001580004F
+:105DC0000015A0000015C0000015E000001600003E
+:105DD000001620000016400000166000001680002B
+:105DE0000016A0000016C0000016E000001700001A
+:105DF0000017200000174000001760000017800007
+:105E00000017A0000017C0000017E00000180000F5
+:105E100000182000001840000018600000188000E2
+:105E20000018A0000018C0000018E00000190000D1
+:105E300000192000001940000019600000198000BE
+:105E40000019A0000019C0000019E000001A0000AD
+:105E5000001A2000001A4000001A6000001A80009A
+:105E6000001AA000001AC000001AE000001B000089
+:105E7000001B2000001B4000001B6000001B800076
+:105E8000001BA000001BC000001BE000001C000065
+:105E9000001C2000001C4000001C6000001C800052
+:105EA000001CA000001CC000001CE000001D000041
+:105EB000001D2000001D4000001D6000001D80002E
+:105EC000001DA000001DC000001DE000001E00001D
+:105ED000001E2000001E4000001E6000001E80000A
+:105EE000001EA000001EC000001EE000001F0000F9
+:105EF000001F2000001F4000001F6000001F8000E6
+:105F0000001FA000001FC000001FE00000200000D4
+:105F100000202000002040000020600000208000C1
+:105F20000020A0000020C0000020E00000210000B0
+:105F3000002120000021400000216000002180009D
+:105F40000021A0000021C0000021E000002200008C
+:105F50000022200000224000002260000022800079
+:105F60000022A0000022C0000022E0000023000068
+:105F70000023200000234000002360000023800055
+:105F80000023A0000023C0000023E0000024000044
+:105F90000024200000244000002460000024800031
+:105FA0000024A0000024C0000024E0000025000020
+:105FB000002520000025400000256000002580000D
+:105FC0000025A0000025C0000025E00000260000FC
+:105FD00000262000002640000026600000268000E9
+:105FE0000026A0000026C0000026E00000270000D8
+:105FF00000272000002740000027600000278000C5
+:106000000027A0000027C0000027E00000280000B3
+:1060100000282000002840000028600000288000A0
+:106020000028A0000028C0000028E000002900008F
+:10603000002920000029400000296000002980007C
+:106040000029A0000029C0000029E000002A00006B
+:10605000002A2000002A4000002A6000002A800058
+:10606000002AA000002AC000002AE000002B000047
+:10607000002B2000002B4000002B6000002B800034
+:10608000002BA000002BC000002BE000002C000023
+:10609000002C2000002C4000002C6000002C800010
+:1060A000002CA000002CC000002CE000002D0000FF
+:1060B000002D2000002D4000002D6000002D8000EC
+:1060C000002DA000002DC000002DE000002E0000DB
+:1060D000002E2000002E4000002E6000002E8000C8
+:1060E000002EA000002EC000002EE000002F0000B7
+:1060F000002F2000002F4000002F6000002F8000A4
+:10610000002FA000002FC000002FE0000030000092
+:10611000003020000030400000306000003080007F
+:106120000030A0000030C0000030E000003100006E
+:10613000003120000031400000316000003180005B
+:106140000031A0000031C0000031E000003200004A
+:106150000032200000324000003260000032800037
+:106160000032A0000032C0000032E0000033000026
+:106170000033200000334000003360000033800013
+:106180000033A0000033C0000033E0000034000002
+:1061900000342000003440000034600000348000EF
+:1061A0000034A0000034C0000034E00000350000DE
+:1061B00000352000003540000035600000358000CB
+:1061C0000035A0000035C0000035E00000360000BA
+:1061D00000362000003640000036600000368000A7
+:1061E0000036A0000036C0000036E0000037000096
+:1061F0000037200000374000003760000037800083
+:106200000037A0000037C0000037E0000038000071
+:10621000003820000038400000386000003880005E
+:106220000038A0000038C0000038E000003900004D
+:10623000003920000039400000396000003980003A
+:106240000039A0000039C0000039E000003A000029
+:10625000003A2000003A4000003A6000003A800016
+:10626000003AA000003AC000003AE000003B000005
+:10627000003B2000003B4000003B6000003B8000F2
+:10628000003BA000003BC000003BE000003C0000E1
+:10629000003C2000003C4000003C6000003C8000CE
+:1062A000003CA000003CC000003CE000003D0000BD
+:1062B000003D2000003D4000003D6000003D8000AA
+:1062C000003DA000003DC000003DE000003E000099
+:1062D000003E2000003E4000003E6000003E800086
+:1062E000003EA000003EC000003EE000003F000075
+:1062F000003F2000003F4000003F6000003F800062
+:10630000003FA000003FC000003FE000003FE00170
+:1063100000000000000001FF0000020000007FF804
+:1063200000007FF800000A90000035000000000126
+:106330000000FF00000000000000FF00000000005F
+:106340000000FF00000000000000FF00000000004F
+:106350000000FF00000000000000FF00000000003F
+:106360000000FF00000000000000FF00000000002F
+:106370000000FF00000000000000FF00000000001F
+:106380000000FF00000000000000FF00000000000F
+:106390000000FF00000000000000FF0000000000FF
+:1063A0000000FF00000000000000FF0000000000EF
+:1063B0000000FF00000000000000FF0000000000DF
+:1063C0000000FF00000000000000FF0000000000CF
+:1063D0000000FF00000000000000FF0000000000BF
+:1063E0000000FF00000000000000FF0000000000AF
+:1063F0000000FF00000000000000FF00000000009F
+:106400000000FF00000000000000FF00000000008E
+:106410000000FF00000000000000FF00000000007E
+:106420000000FF00000000000000FF00000000006E
+:106430000000FF00000000000000FF00000000005E
+:106440000000FF00000000000000FF00000000004E
+:106450000000FF00000000000000FF00000000003E
+:106460000000FF00000000000000FF00000000002E
+:106470000000FF00000000000000FF00000000001E
+:106480000000FF00000000000000FF00000000000E
+:106490000000FF00000000000000FF0000000000FE
+:1064A0000000FF00000000000000FF0000000000EE
+:1064B0000000FF00000000000000FF0000000000DE
+:1064C0000000FF00000000000000FF0000000000CE
+:1064D0000000FF00000000000000FF0000000000BE
+:1064E0000000FF00000000000000FF0000000000AE
+:1064F0000000FF00000000000000FF00000000009E
+:106500000000FF00000000000000FF00000000008D
+:106510000000FF00000000000000FF00000000007D
+:106520000000FF00000000000000FF00000000006D
+:106530000000FF00000000000000FF00000000005D
+:106540000000FF00000000000000FF00000000004D
+:106550000000FF00000000000000FF00000000003D
+:106560000000FF00000000000000FF00000000002D
+:1065700000000000140AFF000000000100000000FD
+:106580000020100100000000010090000000010048
+:1065900000009002000090040000900600009008A7
+:1065A0000000900A0000900C0000900E0000901077
+:1065B0000000901200009014000090160000901847
+:1065C0000000901A0000901C0000901E0000902017
+:1065D00000009022000090240000902600009028E7
+:1065E0000000902A0000902C0000902E00009030B7
+:1065F0000000903200009034000090360000903887
+:106600000000903A0000903C0000903E0000904056
+:106610000000904200009044000090460000904826
+:106620000000904A0000904C0000904E00009050F6
+:1066300000009052000090540000905600009058C6
+:106640000000905A0000905C0000905E0000906096
+:106650000000906200009064000090660000906866
+:106660000000906A0000906C0000906E0000907036
+:106670000000907200009074000090760000907806
+:106680000000907A0000907C0000907E00009080D6
+:1066900000009082000090840000908600009088A6
+:1066A0000000908A0000908C0000908E0000909076
+:1066B0000000909200009094000090960000909846
+:1066C0000000909A0000909C0000909E000090A016
+:1066D000000090A2000090A4000090A6000090A8E6
+:1066E000000090AA000090AC000090AE000090B0B6
+:1066F000000090B2000090B4000090B6000090B886
+:10670000000090BA000090BC000090BE000090C055
+:10671000000090C2000090C4000090C6000090C825
+:10672000000090CA000090CC000090CE000090D0F5
+:10673000000090D2000090D4000090D6000090D8C5
+:10674000000090DA000090DC000090DE000090E095
+:10675000000090E2000090E4000090E6000090E865
+:10676000000090EA000090EC000090EE000090F035
+:10677000000090F2000090F4000090F6000090F805
+:10678000000090FA000090FC000090FE00009100D4
+:1067900000009102000091040000910600009108A1
+:1067A0000000910A0000910C0000910E0000911071
+:1067B0000000911200009114000091160000911841
+:1067C0000000911A0000911C0000911E0000912011
+:1067D00000009122000091240000912600009128E1
+:1067E0000000912A0000912C0000912E00009130B1
+:1067F0000000913200009134000091360000913881
+:106800000000913A0000913C0000913E0000914050
+:106810000000914200009144000091460000914820
+:106820000000914A0000914C0000914E00009150F0
+:1068300000009152000091540000915600009158C0
+:106840000000915A0000915C0000915E0000916090
+:106850000000916200009164000091660000916860
+:106860000000916A0000916C0000916E0000917030
+:106870000000917200009174000091760000917800
+:106880000000917A0000917C0000917E00009180D0
+:1068900000009182000091840000918600009188A0
+:1068A0000000918A0000918C0000918E0000919070
+:1068B0000000919200009194000091960000919840
+:1068C0000000919A0000919C0000919E000091A010
+:1068D000000091A2000091A4000091A6000091A8E0
+:1068E000000091AA000091AC000091AE000091B0B0
+:1068F000000091B2000091B4000091B6000091B880
+:10690000000091BA000091BC000091BE000091C04F
+:10691000000091C2000091C4000091C6000091C81F
+:10692000000091CA000091CC000091CE000091D0EF
+:10693000000091D2000091D4000091D6000091D8BF
+:10694000000091DA000091DC000091DE000091E08F
+:10695000000091E2000091E4000091E6000091E85F
+:10696000000091EA000091EC000091EE000091F02F
+:10697000000091F2000091F4000091F6000091F8FF
+:10698000000091FA000091FC000091FEFFFFFFFF64
+:10699000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:1069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:1069B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:1069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:1069D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:1069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:1069F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:106A0000FFFFFFFFFFFFFFFFFFFFFFFF000000038F
+:106A100000BEBC20000000000000000500000003D4
+:106A200000BEBC20000000000000000500000003C4
+:106A300000BEBC20000000000000000500000003B4
+:106A400000BEBC20000000000000000500000003A4
+:106A500000BEBC2000000000000000050000000394
+:106A600000BEBC2000000000000000050000000384
+:106A700000BEBC2000000000000000050000000374
+:106A800000BEBC2000000000000000050000200047
+:106A9000000040C000006180000082400000A300B0
+:106AA0000000C3C00000E480000105400001260092
+:106AB000000146C000016780000188400001A90074
+:106AC0000001C9C00001EA8000020B4000022C0056
+:106AD00000024CC000026D8000028E400002AF0038
+:106AE0000002CFC00002F0800000114000008000D2
+:106AF000000103800001870000020A8000028E006E
+:106B000000031180000395000004188000049C001D
+:106B100000051F800005A300000626800006AA00CD
+:106B200000072D800007B100000834800008B8007D
+:106B300000093B800009BF00000A4280000AC6002D
+:106B4000000B4980000BCD00000C5080000CD400DD
+:106B5000000D578000005B0000007FF800007FF808
+:106B60000000022A000035000000FF0000000000C5
+:106B70000000FF00000000000000FF000000000017
+:106B80000000FF00000000000000FF000000000007
+:106B90000000FF00000000000000FF0000000000F7
+:106BA0000000FF00000000000000FF0000000000E7
+:106BB0000000FF00000000000000FF0000000000D7
+:106BC0000000FF00000000000000FF0000000000C7
+:106BD0000000FF00000000000000FF0000000000B7
+:106BE0000000FF00000000000000FF0000000000A7
+:106BF0000000FF00000000000000FF000000000097
+:106C00000000FF00000000000000FF000000000086
+:106C10000000FF00000000000000FF000000000076
+:106C20000000FF00000000000000FF000000000066
+:106C30000000FF00000000000000FF000000000056
+:106C40000000FF00000000000000FF000000000046
+:106C50000000FF00000000000000FF000000000036
+:106C60000000FF00000000000000FF000000000026
+:106C70000000FF00000000000000FF000000000016
+:106C80000000FF00000000000000FF000000000006
+:106C90000000FF00000000000000FF0000000000F6
+:106CA0000000FF00000000000000FF0000000000E6
+:106CB0000000FF00000000000000FF0000000000D6
+:106CC0000000FF00000000000000FF0000000000C6
+:106CD0000000FF00000000000000FF0000000000B6
+:106CE0000000FF00000000000000FF0000000000A6
+:106CF0000000FF00000000000000FF000000000096
+:106D00000000FF00000000000000FF000000000085
+:106D10000000FF00000000000000FF000000000075
+:106D20000000FF00000000000000FF000000000065
+:106D30000000FF00000000000000FF000000000055
+:106D40000000FF00000000000000FF000000000045
+:106D50000000FF00000000000000FF000000000035
+:106D60000000FF00000000000000FF000000000025
+:106D70000000FF00000000000000FF000000000015
+:106D80000000FF00000000000000FF000000000005
+:106D90000000FF00000000000000FF0000000000F5
+:106DA0000000FF00000019000000000000000000CB
+:106DB000FFFFFFFF000000000393870000000000BA
+:106DC0000393870000007FF800007FF800000BA30A
+:106DD00000001500000000FF000000FF000000FFA1
+:106DE000000000FF000000FF000000FF000000FFA7
+:106DF000000000FF0000FF00000000000000FF0096
+:106E0000000000000000FF00000000000000FF0084
+:106E1000000000000000FF00000000000000FF0074
+:106E2000000000000000FF00000000000000FF0064
+:106E3000000000000000FF00000000000000FF0054
+:106E4000000000000000FF00000000000000FF0044
+:106E5000000000000000FF00000000000000FF0034
+:106E6000000000000000FF00000000000000FF0024
+:106E7000000000000000FF00000000000000FF0014
+:106E8000000000000000FF00000000000000FF0004
+:106E9000000000000000FF00000000000000FF00F4
+:106EA000000000000000FF00000000000000FF00E4
+:106EB000000000000000FF00000000000000FF00D4
+:106EC000000000000000FF00000000000000FF00C4
+:106ED000000000000000FF00000000000000FF00B4
+:106EE000000000000000FF00000000000000FF00A4
+:106EF000000000000000FF00000000000000FF0094
+:106F0000000000000000FF00000000000000FF0083
+:106F1000000000000000FF00000000000000FF0073
+:106F2000000000000000FF00000000000000FF0063
+:106F3000000000000000FF00000000000000FF0053
+:106F4000000000000000FF00000000000000FF0043
+:106F5000000000000000FF00000000000000FF0033
+:106F6000000000000000FF00000000000000FF0023
+:106F7000000000000000FF00000000000000FF0013
+:106F8000000000000000FF00000000000000FF0003
+:106F9000000000000000FF00000000000000FF00F3
+:106FA000000000000000FF00000000000000FF00E3
+:106FB000000000000000FF00000000000000FF00D3
+:106FC000000000000000FF00000000000000FF00C3
+:106FD000000000000000FF00000000000000FF00B3
+:106FE000000000000000FF00000000000000FF00A3
+:106FF000000000000000FF00000000000000FF0093
+:10700000000000000000FF00000000000000FF0082
+:10701000000000000000FF00000000000000FF0072
+:10702000000000000000FF00000000000000FF0062
+:1070300000000000FFFFFFFFFFFFFFFFFFFFFFFF5C
+:10704000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
+:10705000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:10706000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
+:10707000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:10708000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:10709000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:1070A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
+:1070B000FFFFFFFF00000000000028AD00002918BE
+:1070C0000000291900000005000000070000FF0073
+:1070D0000FFFFFFF0000FF000FFFFFFF000000FF9A
+:1070E0000000FF000000FF000FFFFFFF0000FF0097
+:1070F0000FFFFFFF000000FF0000FF000000FF0087
+:107100000FFFFFFF0000FF000FFFFFFF000000FF69
+:107110000000FF000000FF000FFFFFFF0000FF0066
+:107120000FFFFFFF000000FF0000FF000000FF0056
+:107130000FFFFFFF0000FF000FFFFFFF000000FF39
+:107140000000FF000000FF000FFFFFFF0000FF0036
+:107150000FFFFFFF000000FF0000FF000000FF0026
+:107160000FFFFFFF0000FF000FFFFFFF000000FF09
+:107170000000FF000000FF000FFFFFFF0000FF0006
+:107180000FFFFFFF000000FF0000FF000000FF00F6
+:107190000FFFFFFF0000FF000FFFFFFF000000FFD9
+:1071A0000000FF000000FF000FFFFFFF0000FF00D6
+:1071B0000FFFFFFF000000FF0000FF000000FF00C6
+:1071C0000FFFFFFF0000FF000FFFFFFF000000FFA9
+:1071D0000000FF000000FF000FFFFFFF0000FF00A6
+:1071E0000FFFFFFF000000FF0000FF000000FF0096
+:1071F0000FFFFFFF0000FF000FFFFFFF000000FF79
+:107200000000FF000000FF000FFFFFFF0000FF0075
+:107210000FFFFFFF000000FF0000FF000000FF0065
+:107220000FFFFFFF0000FF000FFFFFFF000000FF48
+:107230000000FF000000FF000FFFFFFF0000FF0045
+:107240000FFFFFFF000000FF0000FF000000FF0035
+:107250000FFFFFFF0000FF000FFFFFFF000000FF18
+:107260000000FF000000FF000FFFFFFF0000FF0015
+:107270000FFFFFFF000000FF0000FF000000FF0005
+:107280000FFFFFFF0000FF000FFFFFFF000000FFE8
+:107290000000FF000000FF000FFFFFFF0000FF00E5
+:1072A0000FFFFFFF000000FF0000FF000000FF00D5
+:1072B0000FFFFFFF0000FF000FFFFFFF000000FFB8
+:1072C0000000FF000000FF000FFFFFFF0000FF00B5
+:1072D0000FFFFFFF000000FF0000FF000000FF00A5
+:1072E0000FFFFFFF0000FF000FFFFFFF000000FF88
+:1072F0000000FF000000FF000FFFFFFF0000FF0085
+:107300000FFFFFFF000000FF0000FF000000FF0074
+:107310000FFFFFFF0000FF000FFFFFFF000000FF57
+:107320000000FF000000FF000FFFFFFF0000FF0054
+:107330000FFFFFFF000000FF0000FF000000FF0044
+:107340000FFFFFFF0000FF000FFFFFFF000000FF27
+:107350000000FF000000FF000FFFFFFF0000FF0024
+:107360000FFFFFFF000000FF0000FF000000FF0014
+:107370000FFFFFFF0000FF000FFFFFFF000000FFF7
+:107380000000FF000000FF000FFFFFFF0000FF00F4
+:107390000FFFFFFF000000FF0000FF000000FF00E4
+:1073A0000FFFFFFF0000FF000FFFFFFF000000FFC7
+:1073B0000000FF000000FF000FFFFFFF0000FF00C4
+:1073C0000FFFFFFF000000FF0000FF000000FF00B4
+:1073D0000FFFFFFF0000FF000FFFFFFF000000FF97
+:1073E0000000FF000000FF000FFFFFFF0000FF0094
+:1073F0000FFFFFFF000000FF0000FF000000FF0084
+:107400000FFFFFFF0000FF000FFFFFFF000000FF66
+:107410000000FF000000FF000FFFFFFF0000FF0063
+:107420000FFFFFFF000000FF0000FF000000FF0053
+:107430000FFFFFFF0000FF000FFFFFFF000000FF36
+:107440000000FF000000FF000FFFFFFF0000FF0033
+:107450000FFFFFFF000000FF0000FF000000FF0023
+:107460000FFFFFFF0000FF000FFFFFFF000000FF06
+:107470000000FF000000FF000FFFFFFF0000FF0003
+:107480000FFFFFFF000000FF0000FF000000FF00F3
+:107490000FFFFFFF0000FF000FFFFFFF000000FFD6
+:1074A0000000FF000000FF000FFFFFFF0000FF00D3
+:1074B0000FFFFFFF000000FF0000FF000000FF00C3
+:1074C0000FFFFFFF0000FF000FFFFFFF000000FFA6
+:1074D0000000FF000000FF000FFFFFFF0000FF00A3
+:1074E0000FFFFFFF000000FF0000FF000000FF0093
+:1074F0000FFFFFFF0000FF000FFFFFFF000000FF76
+:107500000000FF000000FF000FFFFFFF0000FF0072
+:107510000FFFFFFF000000FF0000FF000000FF0062
+:107520000FFFFFFF0000FF000FFFFFFF000000FF45
+:107530000000FF000000FF000FFFFFFF0000FF0042
+:107540000FFFFFFF000000FF0000FF000000FF0032
+:107550000FFFFFFF0000FF000FFFFFFF000000FF15
+:107560000000FF000000FF000FFFFFFF0000FF0012
+:107570000FFFFFFF000000FF0000FF000000FF0002
+:107580000FFFFFFF0000FF000FFFFFFF000000FFE5
+:107590000000FF000000FF000FFFFFFF0000FF00E2
+:1075A0000FFFFFFF000000FF0000FF000000FF00D2
+:1075B0000FFFFFFF0000FF000FFFFFFF000000FFB5
+:1075C0000000FF000000FF000FFFFFFF0000FF00B2
+:1075D0000FFFFFFF000000FF0000FF000000FF00A2
+:1075E0000FFFFFFF0000FF000FFFFFFF000000FF85
+:1075F0000000FF000000FF000FFFFFFF0000FF0082
+:107600000FFFFFFF000000FF0000FF000000FF0071
+:107610000FFFFFFF0000FF000FFFFFFF000000FF54
+:107620000000FF000000FF000FFFFFFF0000FF0051
+:107630000FFFFFFF000000FF0000FF000000FF0041
+:107640000FFFFFFF0000FF000FFFFFFF000000FF24
+:107650000000FF000000FF000FFFFFFF0000FF0021
+:107660000FFFFFFF000000FF0000FF000000FF0011
+:107670000FFFFFFF0000FF000FFFFFFF000000FFF4
+:107680000000FF000000FF000FFFFFFF0000FF00F1
+:107690000FFFFFFF000000FF0000FF000000FF00E1
+:1076A0000FFFFFFF0000FF000FFFFFFF000000FFC4
+:1076B0000000FF000000FF000FFFFFFF0000FF00C1
+:1076C0000FFFFFFF000000FF0000FF000000FF00B1
+:1076D0000FFFFFFF0000FF000FFFFFFF000000FF94
+:1076E0000000FF000000FF000FFFFFFF0000FF0091
+:1076F0000FFFFFFF000000FF0000FF000000FF0081
+:107700000FFFFFFF0000FF000FFFFFFF000000FF63
+:107710000000FF000000FF000FFFFFFF0000FF0060
+:107720000FFFFFFF000000FF0000FF000000FF0050
+:107730000FFFFFFF0000FF000FFFFFFF000000FF33
+:107740000000FF000000FF000FFFFFFF0000FF0030
+:107750000FFFFFFF000000FF0000FF000000FF0020
+:107760000FFFFFFF0000FF000FFFFFFF000000FF03
+:107770000000FF000000FF000FFFFFFF0000FF0000
+:107780000FFFFFFF000000FF0000FF000000FF00F0
+:107790000FFFFFFF0000FF000FFFFFFF000000FFD3
+:1077A0000000FF000000FF000FFFFFFF0000FF00D0
+:1077B0000FFFFFFF000000FF0000FF000000FF00C0
+:1077C0000FFFFFFF0000FF000FFFFFFF000000FFA3
+:1077D0000000FF000000FF000FFFFFFF0000FF00A0
+:1077E0000FFFFFFF000000FF0000FF000000FF0090
+:1077F0000FFFFFFF0000FF000FFFFFFF000000FF73
+:107800000000FF000000FF000FFFFFFF0000FF006F
+:107810000FFFFFFF000000FF0000FF000000FF005F
+:107820000FFFFFFF0000FF000FFFFFFF000000FF42
+:107830000000FF000000FF000FFFFFFF0000FF003F
+:107840000FFFFFFF000000FF0000FF000000FF002F
+:107850000FFFFFFF0000FF000FFFFFFF000000FF12
+:107860000000FF000000FF000FFFFFFF0000FF000F
+:107870000FFFFFFF000000FF0000FF000000FF00FF
+:107880000FFFFFFF0000FF000FFFFFFF000000FFE2
+:107890000000FF000000FF000FFFFFFF0000FF00DF
+:1078A0000FFFFFFF000000FF0000FF000000FF00CF
+:1078B0000FFFFFFF0000FF000FFFFFFF000000FFB2
+:1078C0000000FF000000FF000FFFFFFF0000FF00AF
+:1078D0000FFFFFFF000000FF0000FF000000FF009F
+:1078E0000FFFFFFF0000FF000FFFFFFF000000FF82
+:1078F0000000FF000000FF000FFFFFFF0000FF007F
+:107900000FFFFFFF000000FF0000FF000000FF006E
+:107910000FFFFFFF0000FF000FFFFFFF000000FF51
+:107920000000FF000000FF000FFFFFFF0000FF004E
+:107930000FFFFFFF000000FF0000FF000000FF003E
+:107940000FFFFFFF0000FF000FFFFFFF000000FF21
+:107950000000FF000000FF000FFFFFFF0000FF001E
+:107960000FFFFFFF000000FF0000FF000000FF000E
+:107970000FFFFFFF0000FF000FFFFFFF000000FFF1
+:107980000000FF000000FF000FFFFFFF0000FF00EE
+:107990000FFFFFFF000000FF0000FF000000FF00DE
+:1079A0000FFFFFFF0000FF000FFFFFFF000000FFC1
+:1079B0000000FF000000FF000FFFFFFF0000FF00BE
+:1079C0000FFFFFFF000000FF0000FF000000FF00AE
+:1079D0000FFFFFFF0000FF000FFFFFFF000000FF91
+:1079E0000000FF000000FF000FFFFFFF0000FF008E
+:1079F0000FFFFFFF000000FF0000FF000000FF007E
+:107A00000FFFFFFF0000FF000FFFFFFF000000FF60
+:107A10000000FF000000FF000FFFFFFF0000FF005D
+:107A20000FFFFFFF000000FF0000FF000000FF004D
+:107A30000FFFFFFF0000FF000FFFFFFF000000FF30
+:107A40000000FF000000FF000FFFFFFF0000FF002D
+:107A50000FFFFFFF000000FF0000FF000000FF001D
+:107A60000FFFFFFF0000FF000FFFFFFF000000FF00
+:107A70000000FF000000FF000FFFFFFF0000FF00FD
+:107A80000FFFFFFF000000FF0000FF000000FF00ED
+:107A90000FFFFFFF0000FF000FFFFFFF000000FFD0
+:107AA0000000FF000000FF000FFFFFFF0000FF00CD
+:107AB0000FFFFFFF000000FF0000FF000000FF00BD
+:107AC0000FFFFFFF0000FF000FFFFFFF000000FFA0
+:107AD0000000FF000000FF000FFFFFFF0000FF009D
+:107AE0000FFFFFFF000000FF0000FF000000FF008D
+:107AF0000FFFFFFF0000FF000FFFFFFF000000FF70
+:107B00000000FF000000FF000FFFFFFF0000FF006C
+:107B10000FFFFFFF000000FF0000FF000000FF005C
+:107B20000FFFFFFF0000FF000FFFFFFF000000FF3F
+:107B30000000FF000000FF000FFFFFFF0000FF003C
+:107B40000FFFFFFF000000FF0000FF000000FF002C
+:107B50000FFFFFFF0000FF000FFFFFFF000000FF0F
+:107B60000000FF000000FF000FFFFFFF0000FF000C
+:107B70000FFFFFFF000000FF0000FF000000FF00FC
+:107B80000FFFFFFF0000FF000FFFFFFF000000FFDF
+:107B90000000FF000000FF000FFFFFFF0000FF00DC
+:107BA0000FFFFFFF000000FF0000FF000000FF00CC
+:107BB0000FFFFFFF0000FF000FFFFFFF000000FFAF
+:107BC0000000FF000000FF000FFFFFFF0000FF00AC
+:107BD0000FFFFFFF000000FF0000FF000000FF009C
+:107BE0000FFFFFFF0000FF000FFFFFFF000000FF7F
+:107BF0000000FF000000FF000FFFFFFF0000FF007C
+:107C00000FFFFFFF000000FF0000FF000000FF006B
+:107C10000FFFFFFF0000FF000FFFFFFF000000FF4E
+:107C20000000FF000000FF000FFFFFFF0000FF004B
+:107C30000FFFFFFF000000FF0000FF000000FF003B
+:107C40000FFFFFFF0000FF000FFFFFFF000000FF1E
+:107C50000000FF000000FF000FFFFFFF0000FF001B
+:107C60000FFFFFFF000000FF0000FF000000FF000B
+:107C70000FFFFFFF0000FF000FFFFFFF000000FFEE
+:107C80000000FF000000FF000FFFFFFF0000FF00EB
+:107C90000FFFFFFF000000FF0000FF000000FF00DB
+:107CA0000FFFFFFF0000FF000FFFFFFF000000FFBE
+:107CB0000000FF000000FF000FFFFFFF0000FF00BB
+:107CC0000FFFFFFF000000FF0000FF000000FF00AB
+:107CD0000FFFFFFF0000FF000FFFFFFF000000FF8E
+:107CE0000000FF000000FF000FFFFFFF0000FF008B
+:107CF0000FFFFFFF000000FF0000FF000000FF007B
+:107D00000FFFFFFF0000FF000FFFFFFF000000FF5D
+:107D10000000FF000000FF000FFFFFFF0000FF005A
+:107D20000FFFFFFF000000FF0000FF000000FF004A
+:107D30000FFFFFFF0000FF000FFFFFFF000000FF2D
+:107D40000000FF000000FF000FFFFFFF0000FF002A
+:107D50000FFFFFFF000000FF0000FF000000FF001A
+:107D60000FFFFFFF0000FF000FFFFFFF000000FFFD
+:107D70000000FF000000FF000FFFFFFF0000FF00FA
+:107D80000FFFFFFF000000FF0000FF0000001000D9
+:107D900000002080000031000000418000005200FF
+:107DA00000006280000073000000838000009400E7
+:107DB0000000A4800000B5000000C5800000D600CF
+:107DC0000000E6800000F7000001078000011800B5
+:107DD00000012880000139000001498000015A009B
+:107DE00000016A8000017B0000018B8000019C0083
+:107DF0000001AC800001BD000001CD800001DE006B
+:107E00000001EE800001FF0000000F8000007FF8FD
+:107E100000007FF8000005F60000350010000000AB
+:107E2000000028AD000029180000291900000005F5
+:107E3000000000060001000100090206CCCCCCC9FC
+:107E40007058103C0000FF00000000000000FF0020
+:107E5000000000000000FF00000000000000FF0024
+:107E6000000000000000FF00000000000000FF0014
+:107E7000000000000000FF00000000000000FF0004
+:107E8000000000000000FF00000000000000FF00F4
+:107E9000000000000000FF00000000000000FF00E4
+:107EA000000000000000FF00000000000000FF00D4
+:107EB000000000000000FF00000000000000FF00C4
+:107EC000000000000000FF00000000000000FF00B4
+:107ED000000000000000FF00000000000000FF00A4
+:107EE000000000000000FF00000000000000FF0094
+:107EF000000000000000FF00000000000000FF0084
+:107F0000000000000000FF00000000000000FF0073
+:107F1000000000000000FF00000000000000FF0063
+:107F2000000000000000FF00000000000000FF0053
+:107F3000000000000000FF00000000000000FF0043
+:107F4000000000000000FF00000000000000FF0033
+:107F5000000000000000FF00000000000000FF0023
+:107F6000000000000000FF00000000000000FF0013
+:107F7000000000000000FF00000000000000FF0003
+:107F8000000000000000FF00000000000000FF00F3
+:107F9000000000000000FF00000000000000FF00E3
+:107FA000000000000000FF00000000000000FF00D3
+:107FB000000000000000FF00000000000000FF00C3
+:107FC000000000000000FF00000000000000FF00B3
+:107FD000000000000000FF00000000000000FF00A3
+:107FE000000000000000FF00000000000000FF0093
+:107FF000000000000000FF00000000000000FF0083
+:10800000000000000000FF00000000000000FF0072
+:10801000000000000000FF00000000000000FF0062
+:10802000000000000000FF00000000000000FF0052
+:10803000000000000000FF00000000000000FF0042
+:10804000000000000000FF00000000000000FF0032
+:10805000000000000000FF00000000000000FF0022
+:10806000000000000000FF00000000000000FF0012
+:10807000000000000000FF00000000000000FF0002
+:108080000000000000000001CCCC0201CCCCCCCC24
+:10809000CCCC0201CCCCCCCCCCCC0201CCCCCCCC4A
+:1080A000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3A
+:1080B000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2A
+:1080C000CCCC0201CCCCCCCC00000000FFFFFFFFE9
+:1080D000030303031342020250505020706080508B
+:1080E0000200020006040604000E0000011600D67D
+:1080F000002625A0002625A0002625A0002625A0D4
+:1081000000720000012300F3002625A0002625A010
+:10811000002625A0002625A00000FFFF000000008B
+:108120000000FFFF000000000000FFFF0000000053
+:108130000000FFFF000000000000FFFF0000000043
+:108140000000FFFF000000000000FFFF0000000033
+:108150000000FFFF000000000000FFFF0000000023
+:108160000000FFFF000000000000FFFF0000000013
+:108170000000FFFF000000000000FFFF0000000003
+:108180000000FFFF000000000000FFFF00000000F3
+:108190000000FFFF000000000000FFFF00000000E3
+:1081A0000000FFFF000000000000FFFF00000000D3
+:1081B0000000FFFF000000000000FFFF00000000C3
+:1081C0000000FFFF000000000000FFFF00000000B3
+:1081D0000000FFFF000000000000FFFF00000000A3
+:1081E0000000FFFF000000000000FFFF0000000093
+:1081F0000000FFFF000000000000FFFF0000000083
+:108200000000FFFF000000000000FFFF0000000072
+:108210000000FFFF000000000000FFFF0000000062
+:108220000000FFFF000000000000FFFF0000000052
+:108230000000FFFF000000000000FFFF0000000042
+:108240000000FFFF000000000000FFFF0000000032
+:108250000000FFFF000000000000FFFF0000000022
+:108260000000FFFF000000000000FFFF0000000012
+:108270000000FFFF000000000000FFFF0000000002
+:108280000000FFFF000000000000FFFF00000000F2
+:108290000000FFFF000000000000FFFF00000000E2
+:1082A0000000FFFF000000000000FFFF00000000D2
+:1082B0000000FFFF000000000000FFFF00000000C2
+:1082C0000000FFFF000000000000FFFF00000000B2
+:1082D0000000FFFF000000000000FFFF00000000A2
+:1082E0000000FFFF000000000000FFFF0000000092
+:1082F0000000FFFF000000000000FFFF0000000082
+:108300000000FFFF000000000000FFFF0000000071
+:108310000000FFFF00000000FFFFFFF3318FFFFFB1
+:108320000C30C30CC30C30C3CF3CF300F3CF3CF391
+:108330000000CF3CCDCDCDCDFFFFFFF130EFFFFFF3
+:108340000C30C30CC30C30C3CF3CF300F3CF3CF371
+:108350000001CF3CCDCDCDCDFFFFFFF6305FFFFF5D
+:108360000C30C30CC30C30C3CF3CF300F3CF3CF351
+:108370000002CF3CCDCDCDCDFFFFF4061CBFFFFFEB
+:108380000C30C305C30C30C3CF300014F3CF3CF323
+:108390000004CF3CCDCDCDCDFFFFFFF2304FFFFF2E
+:1083A0000C30C30CC30C30C3CF3CF300F3CF3CF311
+:1083B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF22
+:1083C0000C30C30CC30C30C3CF3CF300F3CF3CF3F1
+:1083D0000010CF3CCDCDCDCDFFFFFFF731EFFFFF3C
+:1083E0000C30C30CC30C30C3CF3CF300F3CF3CF3D1
+:1083F0000020CF3CCDCDCDCDFFFFFFF5302FFFFFCF
+:108400000C30C30CC30C30C3CF3CF300F3CF3CF3B0
+:108410000040CF3CCDCDCDCDFFFFFFF3318FFFFF2F
+:108420000C30C30CC30C30C3CF3CF300F3CF3CF390
+:108430000000CF3CCDCDCDCDFFFFFFF1310FFFFFD1
+:108440000C30C30CC30C30C3CF3CF300F3CF3CF370
+:108450000001CF3CCDCDCDCDFFFFFFF6305FFFFF5C
+:108460000C30C30CC30C30C3CF3CF300F3CF3CF350
+:108470000002CF3CCDCDCDCDFFFFF4061CBFFFFFEA
+:108480000C30C305C30C30C3CF300014F3CF3CF322
+:108490000004CF3CCDCDCDCDFFFFFFF2304FFFFF2D
+:1084A0000C30C30CC30C30C3CF3CF300F3CF3CF310
+:1084B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF21
+:1084C0000C30C30CC30C30C3CF3CF300F3CF3CF3F0
+:1084D0000010CF3CCDCDCDCDFFFFFFF730EFFFFF3C
+:1084E0000C30C30CC30C30C3CF3CF300F3CF3CF3D0
+:1084F0000020CF3CCDCDCDCDFFFFFFF5304FFFFFAE
+:108500000C30C30CC30C30C3CF3CF300F3CF3CF3AF
+:108510000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE3
+:108520000C30C30CC30C30C3CF3CF3CCF3CF3CF3C3
+:108530000000CF3CCDCDCDCDFFFFFFFF30CFFFFF03
+:108540000C30C30CC30C30C3CF3CF3CCF3CF3CF3A3
+:108550000001CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
+:108560000C30C30CC30C30C3CF3CF3CCF3CF3CF383
+:108570000002CF3CCDCDCDCDFFFFFFFF30CFFFFFC1
+:108580000C30C30CC30C30C3CF3CF3CCF3CF3CF363
+:108590000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9F
+:1085A0000C30C30CC30C30C3CF3CF3CCF3CF3CF343
+:1085B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF7B
+:1085C0000C30C30CC30C30C3CF3CF3CCF3CF3CF323
+:1085D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF53
+:1085E0000C30C30CC30C30C3CF3CF3CCF3CF3CF303
+:1085F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF23
+:108600000C30C30CC30C30C3CF3CF3CCF3CF3CF3E2
+:108610000040CF3CCDCDCDCDFFFFFFF3320FFFFFAC
+:108620000C30C30CC30C30C3CF3CF300F3CF3CF38E
+:108630000000CF3CCDCDCDCDFFFFFFF1310FFFFFCF
+:108640000C30C30CC30C30C3CF3CF300F3CF3CF36E
+:108650000001CF3CCDCDCDCDFFFFFFF6305FFFFF5A
+:108660000C30C30CC30C30C3CF3CF300F3CF3CF34E
+:108670000002CF3CCDCDCDCDFFFFF4061CBFFFFFE8
+:108680000C30C305C30C30C3CF300014F3CF3CF320
+:108690000004CF3CCDCDCDCDFFFFFFF2304FFFFF2B
+:1086A0000C30C30CC30C30C3CF3CF300F3CF3CF30E
+:1086B0000008CF3CCDCDCDCDFFFFFF8A042FFFFFBB
+:1086C0000C30C30CC30C30C3CF3CC000F3CF3CF321
+:1086D0000010CF3CCDCDCDCDFFFFFF9705CFFFFFE5
+:1086E0000C30C30CC30C30C3CF3CC000F3CF3CF301
+:1086F0000020CF3CCDCDCDCDFFFFFFF5310FFFFFEB
+:108700000C30C30CC30C30C3CF3CF300F3CF3CF3AD
+:108710000040CF3CCDCDCDCDFFFFFFF3320FFFFFAB
+:108720000C30C30CC30C30C3CF3CF300F3CF3CF38D
+:108730000000CF3CCDCDCDCDFFFFFFF1302FFFFFAF
+:108740000C30C30CC30C30C3CF3CF300F3CF3CF36D
+:108750000001CF3CCDCDCDCDFFFFFFF6305FFFFF59
+:108760000C30C30CC30C30C3CF3CF300F3CF3CF34D
+:108770000002CF3CCDCDCDCDFFFFFF061CBFFFFFDC
+:108780000C30C30CC30C30C3CF3CC014F3CF3CF34C
+:108790000004CF3CCDCDCDCDFFFFFFF2304FFFFF2A
+:1087A0000C30C30CC30C30C3CF3CF300F3CF3CF30D
+:1087B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF1E
+:1087C0000C30C30CC30C30C3CF3CF300F3CF3CF3ED
+:1087D0000010CF3CCDCDCDCDFFFFFFF731CFFFFF58
+:1087E0000C30C30CC30C30C3CF3CF300F3CF3CF3CD
+:1087F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF21
+:108800000C30C30CC30C30C3CF3CF3CCF3CF3CF3E0
+:108810000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
+:108820000C30C30CC30C30C3CF3CF3CCF3CF3CF3C0
+:108830000000CF3CCDCDCDCDFFFFFFFF30CFFFFF00
+:108840000C30C30CC30C30C3CF3CF3CCF3CF3CF3A0
+:108850000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
+:108860000C30C30CC30C30C3CF3CF3CCF3CF3CF380
+:108870000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBE
+:108880000C30C30CC30C30C3CF3CF3CCF3CF3CF360
+:108890000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9C
+:1088A0000C30C30CC30C30C3CF3CF3CCF3CF3CF340
+:1088B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF78
+:1088C0000C30C30CC30C30C3CF3CF3CCF3CF3CF320
+:1088D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF50
+:1088E0000C30C30CC30C30C3CF3CF3CCF3CF3CF300
+:1088F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF20
+:108900000C30C30CC30C30C3CF3CF3CCF3CF3CF3DF
+:108910000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
+:108920000C30C30CC30C30C3CF3CF3CCF3CF3CF3BF
+:108930000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFF
+:108940000C30C30CC30C30C3CF3CF3CCF3CF3CF39F
+:108950000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
+:108960000C30C30CC30C30C3CF3CF3CCF3CF3CF37F
+:108970000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBD
+:108980000C30C30CC30C30C3CF3CF3CCF3CF3CF35F
+:108990000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9B
+:1089A0000C30C30CC30C30C3CF3CF3CCF3CF3CF33F
+:1089B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF77
+:1089C0000C30C30CC30C30C3CF3CF3CCF3CF3CF31F
+:1089D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
+:1089E0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FF
+:1089F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1F
+:108A00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DE
+:108A10000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
+:108A20000C30C30CC30C30C3CF3CF3CCF3CF3CF3BE
+:108A30000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFE
+:108A40000C30C30CC30C30C3CF3CF3CCF3CF3CF39E
+:108A50000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDD
+:108A60000C30C30CC30C30C3CF3CF3CCF3CF3CF37E
+:108A70000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBC
+:108A80000C30C30CC30C30C3CF3CF3CCF3CF3CF35E
+:108A90000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9A
+:108AA0000C30C30CC30C30C3CF3CF3CCF3CF3CF33E
+:108AB0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF76
+:108AC0000C30C30CC30C30C3CF3CF3CCF3CF3CF31E
+:108AD0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
+:108AE0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FE
+:108AF0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1E
+:108B00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DD
+:108B10000040CF3CCDCDCDCD000C0000000700C003
+:108B200000028130000B8158000202100001023067
+:108B3000000F024000010330000C0000000800C0DC
+:108B400000028140000B8168000202200001024007
+:108B500000070250000202C00010000000080100DF
+:108B600000028180000B81A8000202600001828067
+:108B7000000E829800080380001000000001010030
+:108B80000002811000090138000201C8000101E85B
+:108B9000000E01F8000002D8CCCCCCCCCCCCCCCC94
+:108BA000CCCCCCCCCCCCCCCC00002000CCCCCCCC15
+:108BB000CCCCCCCCCCCCCCCCCCCCCCCC0000200005
+:108BC000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCE5
+:108BD00004002000CCCCCCCCCCCCCCCCCCCCCCCCE1
+:108BE000CCCCCCCC4100200003030303034202029F
+:108BF0005050502070608050131313131342121200
+:108C000050505020706080500301020000000000AE
+:108C100000000000000000001F8B080000000000A2
+:108C2000000BFB51CFC0F0038A0F093230688A2055
+:108C3000F8C4E05C760686751C0C0C5BB849D3075B
+:108C4000C32C0C0C0CDA4CE4E905E1FBBC0C0CAFBA
+:108C50008098850F559C871342FF015AC0C7CAC030
+:108C6000A0C1865DFF3A35043B408581A11C88D9AF
+:108C7000941818CC5411E2D2EA0C0C3380FC04A8EE
+:108C8000D81D201DAB46BE9B47F1E0C1378D51F981
+:108C90005B0DA169012A7E0B4D7E1B54BE4A074223
+:108CA000DF36C66E6EB50E71F69FB546E5AFB4C63B
+:108CB000AFFEAE3D2AFF209AFAAD503E00C5D55B0F
+:108CC000A7D8030000000000000000000000000022
+:108CD0001F8B080000000000000BED7D7F7C14D589
+:108CE000B5F8999DD9D9D9CDEE6608096C20E02454
+:108CF000861AFB82DFE577A841878034B63CDF8A9D
+:108D00005AD3D6F6BB506C551456BF3EE1F56933C5
+:108D1000F941122262049FDAD61F2B554BFB6C8956
+:108D2000942AAD3FDE024AF1F5C743AAD5D7A22F58
+:108D3000FE80AA455FC4D2D87E51DE3DE7DEC9CEB3
+:108D40004C76930DD01F7FBCF081E1CEDC1FE79EF7
+:108D500073EE39E79E73EE8DEA0BC2C7CE05388EEF
+:108D60003FECD913028059D9A771F5BCAEBE99006A
+:108D70004721D2D35D0AD0A68009AC6C1D88A41F00
+:108D800094007F6A14565E2D7F3CDE5D097067D1CA
+:108D9000D7EEC3FA6B2C0502ECD9DD0C9039837D3C
+:108DA0000F453743314011A4B6E277F6937890F53A
+:108DB00037109C9C866876FC32F0D1B80015FAA179
+:108DC00022AA07C765F6CF81E47C18072083FDB38C
+:108DD000067A593FCAF3721AC795E5C5FA8B55D979
+:108DE0007EBC4F595721A389FEF01FF9B2E26438C7
+:108DF0007FFD35072AB73E5D93AD7F06444A0FFDE0
+:108E00001DFB8F020AC123AF07C4C3D130A4E5CA3A
+:108E1000FCFD0C341B5B9FF6231EBF509C989ABF31
+:108E20009E8DA7AE668D9E1DCD3A6402000C64B384
+:108E3000B7963DC3606EAE1DDA6E0148842FCDB08B
+:108E4000089EF6B02F5D5489502701187EFD881FBB
+:108E500009DF2FD1CC1CEDED279432FCD8F36578D7
+:108E60000C02EF0FD8FC1E64FD0571FC1CF8BA085B
+:108E7000C72F63DFAB878E6FCD3CF1F1436702EC08
+:108E80000B23BE4D84017C7A0AE282DE9F9486E940
+:108E900047D05931783F23E1BDA8C6971D97FD0DF6
+:108EA0001A21179F0462256EBEF1F225E2A90CE992
+:108EB0006548AF4FC9F6AB22DD72E0EB4A81AFFEE9
+:108EC000F989A604C3C7DA66B05E73B4936360A67B
+:108ED00073E069B568678FA794B27A39FA076811A9
+:108EE000EBC772D52F14BE9B4E10BE9BFF42F0DD28
+:108EF00026F89D49287AF6CF4F129CDEFE72AD2FE0
+:108F0000B68807CB21256DF990BF4B21FE207BF859
+:108F100035BECEECEFDF073FF5B303250E1BA74DA3
+:108F2000C0D73F9FCBBFB5D3D4F46689E4910BCEB5
+:108F300087517EB1769224F0A1F502F25FD1070A43
+:108F4000C05884CF844404605D7583369CFC015D09
+:108F5000F9539FCD775543F9EEE36C18842B14CE6B
+:108F60008DA7EF0FCAD1CBACD7583F5A90BD3F1D4C
+:108F7000FB2D8D55CC069C1DFDF8C577907CF271BC
+:108F80005CB7C758BDD942CECAD43FC911A8009218
+:108F9000F7B2A84FE3B0FA01362D733A7BE2FB1A21
+:108FA000318E34B45F6FBB0128E1F811F0D8725DE7
+:108FB0008627A89F41789404E1CBFBDECFDEEBE16E
+:108FC000937F7FB265BF9167BC1E89F869A4F6AF35
+:108FD000087E19C29F79E8BA5FAC33057A4D383DF7
+:108FE000CB47367F9D281F9D349FB0E1495FE4E168
+:108FF000130B52B46E5835AB7BDAE8F925079F6442
+:109000009CF5174B63F83C9438F10B834721BED590
+:10901000393C65D34BA93F09D7F819D88328231EBB
+:10902000D87C97D9ED214EEB3584768EA33D9B1CE1
+:10903000C12BC99290FBBCDE0D629DCF6BA8E0F006
+:1090400083E8DF032FEB4F73F627438587CF39DCA7
+:109050001B242EDF58FD0CE1D33BBE2211BC322471
+:109060002C1F6BB7598CEF955FF673BBE86FBD048F
+:109070004DBD61BE9E9638F4618324E484C6D799C1
+:10908000573EF991AF669C385F152AD7174BB9F553
+:109090000EB38A621746F2EB9D629FAD0F323141EB
+:1090A000B751D1FD74A9C445F742E15D7682F04E17
+:1090B0001C0A6F417C76A6E41B959EBCE104E10B83
+:1090C0007AE03B557C3D43F059A1F0DBEB60B4F016
+:1090D000CB43F15BD03A9A3B4AF8369F207ECB7C5B
+:1090E000B69D24E0CBB36EE7097A5BC0F9436176A5
+:1090F00038EE730A85EFD191E103F804FB6BBD6A8A
+:10910000990AD96B0013009E6E79D5B2942C7C26F7
+:1091100070B93EDAF1F78C4C3F31FE5B96599D1DDC
+:10912000FFF996B75CE32B8C7F90D90A1DF7854237
+:10913000E70DEFB9E6FDBAF49E6BDC13C5FBC18207
+:10914000C7FFA36BDEEF4B7F74CF3BCCE67D7AE1AC
+:10915000E3FEFE04F9B152AC97064977E9817CF64B
+:10916000FB0C41D7BBEDFA36BC79EA9F29E06A2FA8
+:10917000B0FE44D1FFE70AACDF2BFAEFC5FA652356
+:10918000D73F5DD44F15585FF2F175984F7FCE975A
+:109190006CFC816BFFD1A6713F88D9A640F09CA1E1
+:1091A0007E13AB21F5ED3E467BAB35A0B79592DF44
+:1091B00084FC226B0012E837F92624EB7CAC1F6399
+:1091C000C74DF761BD238AA677EBC01724FB1E3C71
+:1091D00010D9DC5D991D6FB59C6C929097DAA2FA5C
+:1091E00083E45F493549EC59668575F4DB0C5425F9
+:1091F0005A9696E23C0CDD62FDFCFA8A8B76627927
+:109200009326E9322BFFCB39736FFB0C6B35F0E102
+:10921000CE974EC37AD3C655B592BC3425C44F6998
+:109220005C35E5287B5E7C71561FE03F8B1D6566D3
+:10923000077CB6E9122EFFC5F7CF27DDE54B1A2FC5
+:1092400071B5BF34E1FE9E9D0FF07DC7B9DCFF30E4
+:109250005095FA2F0ED7C72A2DEE5FA0F9EA565483
+:10926000EF66F35CFFE1B5545EDF52ABB7B2F2E7F5
+:10927000AEF4B72C65CFB004BACC9652715CA5F9A8
+:10928000029BAF5AC7768FE73CDB35DBC8BFFF2AAE
+:10929000363DF38C5F9C8593CDB3E9EADC70ABFA85
+:1092A000FB13DE60F6D2C0CEA089F084F7CAE9A035
+:1092B0004474DD3909E9621527397D40AA66CF2358
+:1092C0008D3AA07FA4A13169C8ACBC31A6C5030604
+:1092D000DAC9190DF11E411ACC65EFE3BE20DA633D
+:1092E000AAFE07EA5F17DF7BE255E3D13FF2E3E630
+:1092F000351315B6DE77345BF47CB4B98B9EDB9BFB
+:109300007B262ACC88DFD27C173DEDF9A12431ECF5
+:10931000F9C9B8AF365B91DF06FCCC34423CCEF7DE
+:10932000D1FE7603CA113FCAE1745B14DFD7C1B422
+:109330006E40B9C4E5CBC6F8B6DDF87E633D4C435C
+:10934000926D3437B745D93CAE2B87E9D8F7CE9725
+:109350001FE3DF2B607A8095773536905CED89FBD3
+:10936000D2814A82FF7CE4E79E461F3093078AEB56
+:10937000185C0EBC0662EEF2AE4626B066123ED215
+:1093800001293B7F852D33C4C746B32AE8DC57CF7C
+:10939000DAE76E7F66DA5DDE88ED87F14BCDED733F
+:1093A000D79FF392BBCC24DB2B837CC0F1F8AF3E7C
+:1093B000260F76BF3CDE67E1BC4D3E4FF6E4FEC2B1
+:1093C000982F8DC6E716813F1BBF03112E5F3636DF
+:1093D000733F603E78367EEAAAD8707E03B5B1232B
+:1093E00081FE54B5B1270167E1332D9EBD09A79FCA
+:1093F000D57EBE88C68FC35FD211DB58B2B4360BA0
+:109400008FB7FE785925793750C6BF77C45ED3979A
+:10941000D63AFB93BCDFB5CBC3CEEFDCAF32506E98
+:109420007F3FA22D0DE7683F897DCF4197A532FF91
+:10943000FEF4CB81863B901F057E77BFFC13AD1AEF
+:10944000F1FDBC0CC8671BF73590BC453E4379B1B4
+:109450008BF1455F2DD27FFD2BCE755B5CE72E3304
+:10946000BEE2FCC5FAC5A17E86F4601DFEBBF0CB52
+:10947000EE157ED93DCD317A3EDD6CD07357730D3C
+:109480007DCF34C7A9FC54731D959F6836A9FCE3B2
+:10949000E6462AEF684E50F9D1E6267A6E6F4ED234
+:1094A000734BF315F464FC4BFCBCA13925FCC06B79
+:1094B0005CFCF0F7F1808BFF3E5DE32E9F6F9C918B
+:1094C0005DD7ECEF2763EEF279FA275DE5059ABBED
+:1094D0003C1FBEE2EAEFDC0FBEEC2ACFEBEF70D50B
+:1094E0003FFB4D77796EDF439EF5E22ECFDAB7C7AB
+:1094F000B31EDDE5E2BA43AEFE023177F97E1432E7
+:109500005C4E117F74C45A4B72F2CFE0F78DA12FDD
+:10951000B9BECBD47E64FE59D65589FC93F6C52DD1
+:10952000943B26E7275BEE78F9C4A6DB48FC65C3CD
+:10953000F197E6ABFFE5A7E1F9A9607EA85772F2C3
+:109540008397EE5EFE18226704BFFC2F1FFC6DF0B0
+:1095500001CC64C42ECFAF5773D877649F061240F6
+:10956000F69D1FED34477B75722A69E6D09F57F947
+:10957000E66F95593F8152E8C0786840C9E3E795A6
+:10958000F93E25A0F1EFC16A93ECB26230A6CB633D
+:1095900000AE796C5EF932F6FEE7421F765C089603
+:1095A000C4FA1B37414DE23EA6B8DABDDF7B46E682
+:1095B000FB18FBB9E9879126FC0EA5334798378F36
+:1095C000D7C8136737FDC660CF0B666F59CBDE86F1
+:1095D000AA9319F2019596927D9A0C19D4AF5997D6
+:1095E000B67CA518478338DA8972D884241B67AE05
+:1095F000CFFC05CE9BD947FF21CFCADA3D9BC4F3F0
+:1096000047621D5EE4337F29EA3D3F5C3D7BDC1110
+:10961000E905494BE2FEA9F8830C447F69DC653F0C
+:10962000D9F353948499C8616FFC4EE04BD2E34D5B
+:10963000DC0FA202CA877CF50FCAB6FFC972ED071C
+:109640008BA13F23231C311E6F82631719174E1DF8
+:109650000A87AA2492380EC6AB37B371DAC77CC624
+:10966000483AC6F948E67E2A2966123CAACEE1515C
+:1096700095B899C8C14703021EBB1F3B6E26C5FAA9
+:10968000A12F9C856F6D30D184FB256B8C4A786A45
+:109690008FB8EDAF190AEFA75A3CDBFDB9ED438057
+:1096A00056BE1F1E57A761FF6D750D1ADAD78C1DA8
+:1096B00068BFD21E5E523C9CBDBD5ED8BFDD280F88
+:1096C00003180FD785BC8AD1B33DBCAD11D7C1D12A
+:1096D0005A8687CAFCFD44E2EEB86E514DC813C7E6
+:1096E0004D139C41A3C413EF9DE06AE71FA7F8EC5C
+:1096F000B8364823C3DF21E0B7EB752A294DCF895F
+:10970000273EBE5D0EC4DCF0FEF9F0C7DB17F97B27
+:10971000F55C709D2ABCE58BC3DA4F75AC9A4A7331
+:109720007F4ACCB90E3E2BF84B1DABA5483E69F9DC
+:10973000BE8778FB7082FC5B5A38614055361EABA1
+:10974000E17A70E0E95AD1EED78A4FACCB540CFDE8
+:109750005C92916A427ED22AD83A9286B6B39F49E9
+:10976000D1BEF3C3FFF712AD93328DD68964B075C5
+:1097700094631C4931AF56D8F31DD9BC46C1F8CC0F
+:10978000477232D77A5921E0D116270CAD8A427838
+:109790003CDFC303C73A85EB834336FC568AFC564D
+:1097A00085C2BFA640F8ED7118FCED02FEB5C3C13D
+:1097B000DF26E02901A3857C990697B300171ACE0E
+:1097C000BC8B37C4F825424E314C11DDECEFFF2540
+:1097D000FA29743E1B059C23CDE78D2C3DEEC579FF
+:1097E000B0F9DC87F3CA379F7B041C6F285CCF6815
+:1097F000898411AB22559F93AF9E1070F42B228E5B
+:10980000665D3B2ABEFAD702E7F144962E8F09BA6D
+:10981000EC186E1E8F8A79F4C830F70DF4339E2E43
+:10982000F40E2C71D1E5A8C04F4FC0A6CB752EBA4F
+:10983000FC4ECCABD0F93C53209F1DCDD2E5393145
+:109840009FFDC3CDC751FF4551FF25519FFCE74701
+:10985000952B5AAD5AFC9E38A0CCCA8EC7EABDECF7
+:10986000AC776DFB2CBBDEABC80F5223D783ACDECD
+:109870006BCE7A605DD08AF6DB5A8C897E02E081FD
+:10988000F6AF3688766F52BBC583FDBF25D607B5C8
+:109890005BD73EBFD50A53BD77F07DCB828FEC7A84
+:1098A000EFBAE15D61C37184E04D0CC2F1BEB3DE7D
+:1098B00013CAE7A9BF217947B19282EC1F7F699251
+:1098C000F2F74A20D283FEC50E2545FE640C36A071
+:1098D0001F7275204EA92A23F9A3CB2EE6ED7445FD
+:1098E000237F6A005270177BBFA154A1F8C862257C
+:1098F00019F1A31D21252D0AAE827E590BF63FD604
+:10990000A0FC2F1B9EDB8ABED845FD3078B0DF3B24
+:109910008BA23B91AF364E520DE4AB9D936E20BFB0
+:10992000F96D2D3C7FF0B6F355DA676D7A3942FA5E
+:1099300077AD12FF2CD6B74CD5403FFAEAD0472F6F
+:109940002D67E5BE96625D3A87E641705B3E48B49E
+:10995000CD74E42332B80371CAA7233FDC6D8D3C7C
+:10996000AEC37ECAB1FDEA0546BCDB40F1C5E418D2
+:10997000FBDE59A792FD7A5B45D57C1C6F539D4653
+:10998000F6C6A6C5552DE4C7AB0B91BFB2246C48F3
+:10999000E8678FCE519901CECAA5460BDA9B91D9C3
+:1099A0002140BF5349051F2F7206901FCA0F3D89E2
+:1099B0006AF68C76A990198BFD2DC97C09ED99BAB0
+:1099C00000F9E1D9C4F6D78EA39437FE23FF0C101B
+:1099D0001EFF441910EF367DA33D83ED87CD638CC8
+:1099E000A60BAC9729AC5EA44B81CC8C02EAF51493
+:1099F000582F5D60BD0CAF17800B87CDE78338CF44
+:109A000023D4D81F9EC7E8C82BACE4F6BBD36EF1B5
+:109A10007BBE8F362FF42ABFC80B9D0373785EE898
+:109A2000F0EDED7CD091E60BE0CBC2298F5C7F6D31
+:109A3000F3F07E63FFB81B62987FD959F655F1BCED
+:109A4000913FCBC5FBF2353194779DE5E27BF98DF3
+:109A50004DB9F6AF77FAB91CAE81C4B0742811F0D5
+:109A60001F62B0637E4F8DC2EA47F2D7574B7DC36A
+:109A7000E6596A8AD540EB76B18FD66D008501AE86
+:109A80009B0ABE8EFD904A54F37855B4DCB17EFC3F
+:109A9000F57B68FDFCA25C06A98EE813473C7AF9C9
+:109AA000C4CB170170942B4F9E4FB6FE99F8C4DFBC
+:109AB0002517B47EFC3D05D64B17582F53583DB59E
+:109AC0004B2A48AEA83D05D64B17582FC3EBAD9D8A
+:109AD000AB727D0E7F68C578BFFF139AABBCF613DF
+:109AE00021F7F7B3C3AE72C72C777B75B6BB7DC7C2
+:109AF0006C777B750E6F1FEC800518CF2F749D1C43
+:109B00003CC17552A30D5F3F5237C2BAD2F420B6A2
+:109B10002F510CC89492BE4A0BBD95331E7E9ACA33
+:109B2000D77F959FC7CF6F53F420EE23FFD6E72949
+:109B3000A93C9FC09EEF48F0DAF2F7B7B2B0B7F297
+:109B4000E47D438C9F7FF043288E768EB1506B78F6
+:109B500085E1D1FF2CCF7BF7F6FB8A9A9CA63AF6DB
+:109B6000C5CC3E83A4C30F737E99C2F36D181DD07C
+:109B70001E5221D158C9FA6BABF0913DA28447D057
+:109B80001B150EB995232F2FEB970213CF53D02718
+:109B90000360FE9B7CDC501C08EE08F4D166BA180A
+:109BA00053E54E07180386C493BEE212CF13ACD719
+:109BB000519E95064F75BF9751BF92791B1C2F1A66
+:109BC00045BF4A1FE5CB9CF27E478037087753BFDD
+:109BD0006C97547A7C6CB65F7F2C452F314F56764C
+:109BE000E4CBE1B908CA37F1C53394DF30214AFB31
+:109BF000B2B5A5D7B9F2C1FF59AD72F98754BDE32B
+:109C00005A09E3BA15579B7DC3F079331357E4F72C
+:109C1000AC586EF6D5E4AF3798A78FF99E39D64188
+:109C2000879A4CA3FD6E4D0EF3FDBC92227F63A775
+:109C300054321DF32DEC7A4A0593B40CAEC84CD3C4
+:109C4000C2FD5EE7585F1CED5405D6EF93CE62ED82
+:109C5000E4C571A7FFD2FB542A94B79DF3B95D65A3
+:109C60007A12E1147AB26D047E1FD1EE51E3C95C21
+:109C70007ED16FAB7C5FEB0FE5FEDE176A78409D0F
+:109C800035146F8F217E717F3B06BAA4FFC3D9873D
+:109C9000F2A52AF6BC8478585BB62836DC7CD90657
+:109CA000EAF0205D18897F16321F4179300C1C3F85
+:109CB000CC0507840BF37FEB0BE3C48783F65229B3
+:109CC00088FD98199518DF870457DE32737306CF25
+:109CD00043F897864DA49F6C6E01F457DB76936C26
+:109CE000865EF5113DEBB9FD54C3ED2193FDC179BD
+:109CF00044EB87B7AB654FF939D56D0FB535EF003C
+:109D0000679E9BF75C85FD4C871A5ECC8D8FC2F6F3
+:109D1000C3B7337EC13CFB8DCD1A22057A9A752AD2
+:109D20006F688E51797DB341CFF6E61A7ADE8C4D9D
+:109D3000E7E2F9A7545725C35B57EC81D8E5ACCAD5
+:109D4000ED283B288FEFDE05682F770F96D93690E8
+:109D5000C1DD3D09785E9F7AEB02DCE7770741F8C9
+:109D600015DA16A05D9D2DDFD1361FCBC2CF10EACC
+:109D7000BC6F01EEF76F17F90FA098DA250EBD77CB
+:109D80005AC04FFC477B576A6FB5617F414594E1EC
+:109D90009105EE3298084F50E3E505816DD43F8977
+:109DA0000036DEA7033FE0E34D11F96DB54B46C029
+:109DB00023F7EF5BAAC1FD5DB525143F52E3717433
+:109DC000BFC2ED6304DC05F6034A92EB3B718E2FB4
+:109DD000FFBA1941AF093846A23F4307F9D1EDF365
+:109DE00069CA0BB9F5F4A91EF776FFE8F0A2D6F51B
+:109DF0005B7886ED09353927C0DA47CCDE4C252B58
+:109E00004717672C5ABE058E3B3660E7392669FD39
+:109E1000DB7856746E77ACF0D0D15FCAE3754171D0
+:109E2000FEA4507893AA1847F4030F37940F67AF36
+:109E300095257C68840DCA8BB18D21E19CE1E531CB
+:109E40006689AB5C5C37C1553F12AF727DF7EB1F83
+:109E5000777D3F513A5DE299C7A784DD6897CFF5DA
+:109E6000CEB3C07E0F1627560570DD34404D8AE113
+:109E7000F5CE2F3C44F80F0DAED385ED6605E58396
+:109E80008B753D8F9775FB7B5DBB59CFCA86FD7D7A
+:109E9000062F9BF6F738AF6FD9DFA7F2EF28F759F7
+:109EA000F96B9D67B45BF81D5AC96F0B152958E211
+:109EB000A0CFD8F10DAD08DFF8CBD2318BBDEFFECE
+:109EC00050E6F2007A62CE7A776ADC0FFDCC943BE2
+:109ED00062E8AF5C77E64331207927E58C07FE3CEA
+:109EE000C0F3C5CA42899E00AD77B3BF98F1E1A126
+:109EF000876483EB21E535D4873E8BE7E3AB10DF46
+:109F000067A25D54C3FDD521F19DE85899AD3F4846
+:109F1000574FF9EF34AED77F87491B0CCEEF159B17
+:109F2000F7D0B890961AD97AAFB0A01FCF1F81B0E2
+:109F3000FB26F2A6509A48939F6F12C3A7CCBE4F40
+:109F4000BEB8BFC5CF706D5CA6FB7089542D8FFB6A
+:109F500048C00DDA9163A5E3ECF93DA417CAE39B71
+:109F60005280FA7BED990F35215E02997F0283E1E1
+:109F7000ED1F27A5C040FF6F80C315B8AC07483E52
+:109F800057F7109EBDF85A3788F7B40BEF3F0970AA
+:109F90007F7E2CC9DB0DD65358BDA943EB75077BDB
+:109FA000E6AB68BF4DE178F48EF35E4012E776DDF4
+:109FB00070D8FD7AEBDF1210716D2D4DF18D67CEEB
+:109FC000BC21867EEDCE298CFEB5F9E97F4B80E77A
+:109FD0005B19C76E22B9DB3D6923C533D7556F26A0
+:109FE0007BF228B323F0FC747765EEF69DCD3C3F01
+:109FF000E65CB8BBB18AD1A7F37999FCB4DE7ADF0D
+:10A000000954B9E28D5A857B3FC8F8AF0FE5E8489F
+:10A01000FC27471EE0EB72947C8766213FCF50D629
+:10A020008EF6805F94EF0E1C6F13FA9FE47FF9F2B7
+:10A030001E70E64BBE2FF82213E0722658C1F9A31A
+:10A04000DB6F494EFAC5D8FBF98E76F9E8968F1F7B
+:10A050001E17EBE17D25DE44CA5F49E9B9E4B3127E
+:10A06000FBF42F173ACE7BB52B694D47F86B364A78
+:10A070004EBBF61B6632A439F627A1D805BF5C8813
+:10A08000FB1F259E739FFE29D38C6A6CFC9B9B61F2
+:10A0900046359E4B50AC00D6BB59C934D2BEA2DA6D
+:10A0A00047FEF27515D7EDC53C2BABD617C76A6DC9
+:10A0B00015BB1AAB0CE4976D9467FAA6BE2486FD17
+:10A0C0000462EA8CEAB194DF9DC079876B59BF0EB8
+:10A0D0007ADBE3DE2DF8F65BBA3959E3F2E034EDD2
+:10A0E0002F200FDE87788C1B590CCF39F65743F1A0
+:10A0F000CCF3043A2B86E0798EE6E0EB00E27906B9
+:10A10000C9FB9CFE0B86E7B35D780686E7A9593C40
+:10A110007757703C77D66CEEAA72E2B966D7DE4A02
+:10A1200003C7E7787E48E3E773438867079C5E3C94
+:10A1300087255BFF7CAC1DF9D6CBF70CEF7F8FF04A
+:10A14000D8EF3F0AFC82ECE1B1E313176AE43F4920
+:10A15000D1FEE94E29AF5EBA442B402F758A757443
+:10A16000A7C03FEBFF0BD47FA9E8DFD6B7421FFEA5
+:10A1700083F66F0B501FB27ACBA89E9EA27DF06033
+:10A180003D0B86D5A3ACDD95C447614FFF268C4AB5
+:10A190001FB37EAEA37E34CFF8069C949E67FDDE8F
+:10A1A00044FD2A9E7E4FB13DC1C6E926FC81070FC2
+:10A1B0007F663B2696F4F083D2E3927B363F942F62
+:10A1C00077D7CBAFD77AB85E1B6AD710DFFEBC73E8
+:10A1D000CF6EDC27BDA99BDF46BC8E761DD876608E
+:10A1E0005928B94DE376209D83B0BE51946E636DBE
+:10A1F00095E33D511E7F77EBA3F1B63D54CDF5407D
+:10A2000070947A699FB0D73AC6301955CC9EFE44F7
+:10A21000532E3FC3339A9DB7E6B69B7F8373243F8B
+:10A220005182FC6BEDB1CFECE863B4331B7B20971C
+:10A230009C4F86923FC7F9A9BA65927A15FE917C28
+:10A24000FD9626AC9D7B6792DCEDC7BC461072186C
+:10A250004D6BF4C74519DE0E69E4C288A37FADECEF
+:10A26000626B3ECAB10AC62F587F5CD33E29992B38
+:10A270003E6EEF7F10881CFB97719F9B9DA47CB85E
+:10A28000C53347D8DFB4D8F6EB6F715E87D49E0B29
+:10A29000A638F06ED3E90E2971E179284FE7713ABB
+:10A2A000158F924E03824EB098E7A19E7BEC5C8D99
+:10A2B000FC8B115F02FDF0417F8F5EE2E0A3713EF7
+:10A2C00048F68E02FE7AE8DF7D1CF77F611FED778E
+:10A2D000BBC3CBBE83F7EF58BA1A9F6264C7ED6663
+:10A2E000FABEC4A17FBCFEAAC17DF4E2C2F265A79A
+:10A2F000587328DE9FBD3FC89D7FC018AB06F3860C
+:10A3000056CBDC7F7E67D1D7280F618D15D003A592
+:10A31000A4C7C8FE5B27F2D93A453EDB5A91CFE687
+:10A32000B7566FC5FA9B0012E8976C9997A2787F91
+:10A3300054D1F4D638C2919A837A225A6AAFCF1F89
+:10A340002FC4F53958B6BED1DEC0E61B8DD9E58DD8
+:10A3500064BFB5B77079F3D9E00B0BAD7A64C53E35
+:10A36000A2C7A6BA25C5308C3F325CEBCE9F0B55F9
+:10A37000875C65ADA2C455564B270C1BB7F819FA7C
+:10A380008966E17CFA208E70E6C9179E12E476B6E3
+:10A390002C4FEBCF60BEC1D96A7CB381E7A8DD79D1
+:10A3A0009CED416E0F3E8A0E218AE30ABEA8E3713E
+:10A3B000D5A2B955BD180782319C2F304FD0C90F97
+:10A3C000F9F8E2AF8D1F5FD1E118E65DDCD21A0526
+:10A3D000CC73B965EEAFE21903E56A5F0CF333DACB
+:10A3E00098246965DF37CCFD9591CB9F7C404B2E3F
+:10A3F0000F22FEC209B2BF223393F4FC6BCF6B2451
+:10A400007ADE19E47A6E8AA0A782F49C99A5E7BA4D
+:10A410003A46CF99D975BE4EE9D10AA1E7F9387EFF
+:10A4200019CAA1FFA67DDBCD75BE46944306F45242
+:10A43000FEED865A9F0FFBFF6BE1C5862B3C97C94B
+:10A4400047A25326817A61435CF1A11CF99BE3C3C7
+:10A450008FFAE87D017CF8C35C7CB85CD0432EDACF
+:10A46000D7942BEF6E4A5072E1653DD28BE3A591F4
+:10A47000E3C5F757C1CBA0BED0922B916FAE88A990
+:10A48000B4EF564ABA3A285EC4F41EC61B56C8A694
+:10A4900081F126F8969FDFC7847ADBA15FFE180C56
+:10A4A00072FB445EBF88E2186C6AB82F63E58F0DBB
+:10A4B0001B0F4DFBFB9DF79478F3325E0BBAE31054
+:10A4C000472A961423BDF2F5F776F35E1DCFD5DA51
+:10A4D000F919DEEF2B6448E53AB72885346167F651
+:10A4E000AA84871B99AE9D86F8F8D8423C9FD9591B
+:10A4F000D13A8EEC1871AE61C5966775C501E70A51
+:10A5000085A9BFE943E763E37705AAC91247FBF4CE
+:10A510005E577B6FBBC1FE447B66B7F9430C3E536D
+:10A5200049EDC578B37D7E43DD323F436A330FDCAE
+:10A530008C8E270577A1E7388E3CD0D681FB6DB491
+:10A54000BF3EC1F8E4B78FC8F156F6F58ABBCF58C5
+:10A5500088E75A0F01E7179B3E6F3DD0362E175FF5
+:10A56000E4A3CF79A12087E714F3D759210F7FF512
+:10A570005E549C8153CF5F8BF3F197C0CFE15E8E29
+:10A580000FB86B6C4E3AE59BCF209DEC7682CFBC2A
+:10A59000EDF3B5637C95E07C95899E5D085F097855
+:10A5A0006DFA9D2CBC23F155608D6CE079AE4A2587
+:10A5B0004172B3B3F43A4BDCEB48F99E72CFB48CE2
+:10A5C000B8D74AE4B54306ED8940A949767448DC1A
+:10A5D000CFA355BBE5A612739F9B8835253276BF66
+:10A5E000E8BF0CAC5169DCC1F8711832C12896790A
+:10A5F0009C14C51FEE2B02F04DF27BB27639FD9E06
+:10A60000F65311F96A98CB4BF7B2C1E747C86F719F
+:10A610008F13BB78F8FC1A6F7D082BC62107DEF379
+:10A62000B753E090639FB341DC2B6AE3DFDCB29465
+:10A63000F2CA83E08BD3FE20D661E1BEAF43ACE724
+:10A640004E7CCEC573BCD375DAAF55F0788B257DC3
+:10A6500099FC0CF6B9337B3CFBBC995D6F24FAAFD7
+:10A66000C6F594637DEF0A717D3AF0B5D47FE33E81
+:10A67000C4FA1318780FC5E3CD1F509CFA9CCC5B2D
+:10A6800032FAF79F098DA37ECEE9EF931738D6E50E
+:10A6900039E21C0740AF9CEB9C97DF0AEC427E78C6
+:10A6A000EA30DF8F3D75F808D9E14FFDDE9746BEF1
+:10A6B0007BEA83E1F31E1E17FB22BBDEE3BFE7F656
+:10A6C000D9E34A6F512EFB2E3B7E9AEF070FBBF961
+:10A6D00015945E19F965E0A67D32FA071E6FD6A4BF
+:10A6E000D799FC9927E679CEE13E19F74D23CD6B3A
+:10A6F000AB87BEF63CB7D6737B746BFD9110FAFF47
+:10A70000B73EC1E77BB49E9F8FCD07EFAE669EDF5D
+:10A71000B1F589DCF86898C7F7C70D7EA334A75D4B
+:10A72000EB3967B54093DDE7BB4E317CBBEBB9DD60
+:10A73000B55B89874F049EBCEBBBAEA711DD08510A
+:10A740004836CE9708BDFB5D7E92035F6FF932E617
+:10A750006B2C0D9B12EE65A12FF3249B5789A92525
+:10A76000F0DE98E2FA1E6932E677C4781EF937AF58
+:10A770007E2DF3322BDFDC5444655D379E5B84F81D
+:10A7800028D5C99F72337A5C48407F732DE627D065
+:10A790007A64E5C0CD3DE7A13F4B012E2F98C56BF4
+:10A7A00028E3E85E3F72D2E4931BEC473A1EC8B63A
+:10A7B000CB3B4F4FDE6D00960C2FC796F3FA16FB7E
+:10A7C0008372A8C49367A22F74E7A5443DFD4F454B
+:10A7D0005BB5AC80BCF2931C670C6CD30CDC67D708
+:10A7E000FAF434D607630CE60D861B9981C4E83968
+:10A7F000460709CDE591F0BE0EA091FBBF33E03CCA
+:10A80000A7D350C4E5D584AB6E97709F7134CEB892
+:10A81000621A96DFCC997FD52EE4C76059DF45F2E6
+:10A82000B4037AF7525C20E9233BFCE6DAD631CE5A
+:10A83000F64B8B24DB1F28E80F86323B4B7F363FDD
+:10A840003378D65F8EFEB1E56EBC8F962ED714712D
+:10A85000793512FD4F761C9B6E43D7478BA0DB03E7
+:10A860001417EDAE195EEE0FA5DB36D277E1DADC18
+:10A87000F9BAD715492E796C3F3548419CF1892C9E
+:10A88000EE6796C7CF6EBA7F18F9233BEF67866CE9
+:10A890003FE38C1E13E356E3A1C7C473DF8CA7E329
+:10A8A0001940FE3601ED24661E111FC99EFDDC46CF
+:10A8B000C14741789EDAB35560E9A45752A03BF2F4
+:10A8C00054CE93C371F45FACD3C3742F12CA4F9E9E
+:10A8D000BFC3F3FC8B39480CBFFD80F22D542E838F
+:10A8E000857EBF7A01AFC4F80EF3FB0FBC7500F78D
+:10A8F0002BE1996E3A29078A28AF2DE43D2772E0B3
+:10A900009A6B687FE3A1E368F3FEBF5F24ECFF224C
+:10A910000893DD24DAE7CBDFB3ED7E1BBFC6B108B9
+:10A92000E5ED741C90081F659313F7E3FE0C7E257C
+:10A9300003CFCB0413F3F656FF74167D1F1A574846
+:10A9400054225DDE3A50A4B75616922F9948B6B0FD
+:10A95000FAC68140BCD520D5E2D3908E7D12D1516C
+:10A960001AA751BED6EA7FF7DF1F18265FCB8E3FAE
+:10A970000E96158BE29B5DC674CD294FCA42C95F06
+:10A980001639E3F622AEEBF5AF07C3EDB16760F41D
+:10A99000F18FD2F120E2F29F5F84F64B17AE019E59
+:10A9A0001747797A5DE5BCFC46D1944518DFE98A02
+:10A9B000F07271F8C8792D246713E4FF5BC3180E99
+:10A9C000F1087BFDE21E4963FC85C3C80BEFFCD791
+:10A9D0002BFB284FFE9EF0FEF3CF40FAC47DE48FA0
+:10A9E000BBE7FA6DAEFB93DED41BDE2FA2F5AAB750
+:10A9F000637C7A62D2CED774C74526A0D660F39B1B
+:10AA0000C408E3677838ED626845B6A9BCACB71CEA
+:10AA1000F7C96B4BB78DE1E7FD17EA87C86E972939
+:10AA20003E9D0F5EAF9D9E6FBE76BCDDDBFEAE0829
+:10AA3000BF47D51B17F3FA831E44FC9651FE2C60CA
+:10AA4000FE6CA7BF2F673CEA8D22EED76CAF5894FF
+:10AA5000B81CE7A598730F327CDC5B1AA57D90FFCC
+:10AA6000A2DA4B7D0E7BC3CE6753C47ECE5F9A22A3
+:10AA7000B9A86866D719182F7A5EC61505153D3B2B
+:10AA800025B4E7EDFB2010AD174FE5F3C579058040
+:10AA9000DBC5785EE1B863DE1073F8C1509E88FDB7
+:10AAA000DB29A0F7B4F0ACA1F49DDFC5F3D0635768
+:10AAB000F0F34D1395DCF41E7F99EEE3F1AF534BA9
+:10AAC000E77CEDF3C53DEF8AA8B47EA6E8ABF7E2DC
+:10AAD0003D771D567112E33103FE5417CAAB0DFFCB
+:10AAE000E883CD34FFD1E937454FD03D7A15297D34
+:10AAF0003A2EEF7CEDEE48ED0A129E2D9ECFE0FD42
+:10AB00007E7998EB9B9E94EF36FC6E3E9DDAE9C70A
+:10AB10007D678CEFABED7D783294BC3CECB0CF75AB
+:10AB2000D3223E9A92BC94E4C0405961F72F0CE2C4
+:10AB30002B4F1EF31D11AE97A718AB79BF9386F765
+:10AB4000CBDA78F9A04B16BF1721134438FC8C914F
+:10AB500013B82E6EE472E2EE35BBE8BD7263DF7CA3
+:10AB6000FEBDBF05F5EA1D3EB82297DFA82DC2E362
+:10AB70004193CDCC3AD41B93533E40FBF4F688412D
+:10AB8000EFC75FC6F1D43509E238EC69D81FFBCFB7
+:10AB90009E4A95F4D2D852A0FB92C6AE01D2DB6396
+:10ABA0006B206DB072D7CEB93BD1BE55AB218EAE06
+:10ABB000EBDD953758680F6CAA0013F5B8FF46B661
+:10ABC000C0587DD5F0A53150BC29B58CEE6959CB64
+:10ABD000D6255263ADD140F6C3D1182F072AF839D4
+:10ABE00098AE331582C3BE7F9CEC4EA61FFCB5FD0C
+:10ABF000265EFD65C015D48F7F2EA7AB71573D9D96
+:10AC000053EB1AF310DD4B635D033CDE69C7A515FA
+:10AC1000C65F6C9CF62BF49CFE9523A1E4B79DFCCB
+:10AC2000C0F891E44C17E613E4C0676798E3F30EAD
+:10AC300021E706FCF0298A97B4F8E83E176FFD6516
+:10AC400002FF775B4BFEE10C23AB6FECEF078B0C45
+:10AC5000977FA3E20395E6B348BE1174A43BB39378
+:10AC6000E8FE17BC18F4745A9617943BCEB3DC1B5D
+:10AC7000EF85C98867DB2EAAE5F68C7DEE91E12190
+:10AC8000730FFBAED705E87ED1F14DB9ED23B5408A
+:10AC9000FBA8ABC8FC6918F30D443EFFD7972F21E2
+:10ACA0007D9FEFDEDABB235CCEDF2559951D489FE3
+:10ACB00049FCFE196FBD83C25E64F620F1CD268B80
+:10ACC000DFBBB5896D7D1E45BEBA9EDFF3C7DEF3DF
+:10ACD000730E06D079F1D80DCBB45CEBD51B57CEF3
+:10ACE000B7EE826A5F3257BCA556D0AD24AECFF71F
+:10ACF000F1E983E9B0478B6A81EEFFD2197DD0F686
+:10AD0000AD805E4ABADFD858528971A15B6F540D8D
+:10AD10007C7F5F65AFB510E72D41EF839823A3F4E7
+:10AD20009A781EBD223ECEE8769CF72EAE7894CE61
+:10AD3000C3DFFE54000275783FA9E7F7D938E9234D
+:10AD400067E96CEBAB7CF32BF4790BC397F3F780DB
+:10AD5000308833388F220B0CBA1FD9E8253BF4A872
+:10AD60001544DD0A467D2FD72BED2178308EF7CCA8
+:10AD7000F2F2A6F054C0FB6735A597EC754DAFA273
+:10AD8000725175A29BECF369DBF55CFAE153914AD1
+:10AD900097DF24E4895369C91B9AB89F56852939DE
+:10ADA000D6D9C12285DBD3AC29C573ADE1E5EDC9A8
+:10ADB000F2C79B42DFE8D97D32F107C92E468F707A
+:10ADC000C5A2B764C77D9C61EFF9622F3D3DE59355
+:10ADD000A5E73AA4A723BEA0D52735A49FC1EC249C
+:10ADE000B2FBEB019CF7A66FD22C7E0F8361F82C8F
+:10ADF000077ECB85DDA77CA0D079DBBB9676D0FE25
+:10AE0000632CEB03F37AD933E7BDD3078B785E78F5
+:10AE10005751624984F27281EE195E27E4C679F2D5
+:10AE2000CF8298871504A6E7908F16FBE0C11C74AB
+:10AE30002D8F703CA743E6E722B3F2CFF77129F7D5
+:10AE40007DA276FB83C20F50B81CE6F39D620ED044
+:10AE500079D2819B0AD3DF036C6EFBD02E57E25C64
+:10AE60004FF719D03E93EE7F4AA3DEDD145B4278A4
+:10AE7000BF0FF529DA56B55C4FFA53DC4F0C864408
+:10AE8000F7CA86C4BD1BF7A58E3C8B76CFD11A05B9
+:10AE90003D3E10AC485AA85F8BABFB2C09F56C69A2
+:10AEA0009AE2C74C8F598867E3AE4504B75FE96DF6
+:10AEB000417D99562084FA7C008D4966C73D127EFB
+:10AEC000A403F35DFCB5695064DCD70338EFF737B2
+:10AED000602FD9597EA687C96E52FA5A502EB5D71F
+:10AEE000EB14D739EDC63E70EEEFD8B8B7E2B81321
+:10AEF0004AD97846567F7AED8D7C7606D3B3222FD9
+:10AF0000674107EEDF6829B1F2C3E1ED1D686F7E8E
+:10AF10004B37BF4EFC93679FC1F8E29E48D9E8F9D2
+:10AF2000E2B9B09B2F06FD27C2EFBAAC4E087A30CB
+:10AF30002EFD0D83FBCABD7EC0F99F7BECBE3DF7A5
+:10AF4000307CC8A84FC972E9D9F324FBBE1CFDB000
+:10AF5000AC7CE581A92ACABD5F4D90F1EC30F25975
+:10AF600014F9E71DF0917FE81DD81F9DE180676708
+:10AF700084AF13E8F2BFD6E7F03F5EDEC3CBB6FC8A
+:10AF8000FBCA5DEEF29761C938B4BFBE7CBB1FD26D
+:10AF900012FEDE29F7BEF99108CF37FF0AA43A1056
+:10AFA000CF6BC5F9A46B1E9BAAA2FD74E50CBD1264
+:10AFB000E39F361CCF0A3DFD36E363C3210FAF0A82
+:10AFC000A755CC977A7DFB8CCF9C0DD84FBA6302E6
+:10AFD000FA0FC7404E3DFEA52E379C23CDC30BB7BD
+:10AFE0007DDE281F1CCA1629A71FECC588DB0F763B
+:10AFF000B2F7B31F45FB7856F6F7D7D9796627DB4A
+:10B00000EF9FF2F47B8D86175103AC527A1AA5AAF2
+:10B010006CDC2BE8B7CC8968FFED989FC1DC7547E5
+:10B02000BDAE02EB35FA86A937D27C5687EE8DA2EB
+:10B03000BFA84F8244AEFB77CA42C931D15943EF12
+:10B04000E101F1FB820EBD62DF63DFBF08FD7C0121
+:10B0500060FB7B7A2AC407E4FF91D05EEDC9989526
+:10B06000183F565CFC5184F11466F7AE12F6655138
+:10B070008DFBBBD71F747A94AFEB7AE823FB3FAA12
+:10B080008533329E6BAD73E73FDD59F44592BB2BA0
+:10B09000F7F9C9CE5C09C6ADF533691D921FECFA0C
+:10B0A00075A7539CF8FA32236EA15C83B8496D3DB5
+:10B0B0007CB7EA0309D20E3FC12AA55FC5F5B68A5F
+:10B0C000E90FE7FBEB62B2F1468EDFDF643FFDA0E4
+:10B0D00019E11AC4838F9FA7D559D931CF233D5287
+:10B0E000238FCB19C5170FB37FBF2EA6D238CBD66F
+:10B0F0004D29E6FE21B7DC7C57E8A99F3CFC2D9545
+:10B10000EEA3FAEEAB17201E563C2E83C6C67DF783
+:10B11000E10864487FA555D45F576D9773EA77CCF3
+:10B1200074A2BC94ADDC7F79D5B6407A316B7FD503
+:10B13000A3AF9F050CBE775BFBF74CC475F05DEECB
+:10B140005704ABEFAC8BD8FBAB14F8BFB9ECA9CF6D
+:10B1500047B9BD7DF847454DB8BEA52D3BBF48FD5D
+:10B16000F65EEA0F38E2734BA2FC7C2CABC7FDA065
+:10B17000DF91D25372C4EF6CBFFBE1EF481CBE1DE0
+:10B18000FE7410E1DB72BF9A6470ACDAF21EC993F0
+:10B19000055BBF17453CACDAE18ED3ADD8FA610749
+:10B1A000E6A1AC90A17F31F2B37C8CCA474DAD5F74
+:10B1B00026B9CFCF57AF2492B07A3FF8EDA2DFB0D7
+:10B1C000EF6FC7640832D1FBF6BE83EAE3584E86C0
+:10B1D00053B8C35DB5C32DF7566D799DF222741F28
+:10B1E000F4579C8DF9016EBEF6D667EB4745FB69B7
+:10B1F00055EFBAF7D0AE5CB5FD9D5FA3FC58E59165
+:10B200009F6FE37FCA87FAA9DBA29EFB69B61496FB
+:10B210003FB1E27B47EFB5D8B887B7FDEE5ECCB360
+:10B22000BFFAA3F7EFFD67B4179E0AEA28FF577D20
+:10B23000F7852838F8F11EB1FEDE9D045639ABF7CC
+:10B24000EE7F06D278A0F5DD277F3B19CFC9BDFB85
+:10B25000C81FC719ACFEF54F9E47F7F25FFFC30545
+:10B26000E387B3AB905FD301275C69A2ABB143E244
+:10B27000C6CB13E2E9A1C7E1470654B477FF2041EA
+:10B280003FEAB995BD1FAAB83FD963423FE267F7CD
+:10B29000F6D7F77C9595DF61F409E4A00F9BFF4496
+:10B2A0001FE96F2626D973E5F6D71721BCABA09FFF
+:10B2B000F4E9107A3ECFE839334B4FEFF7A3704CE7
+:10B2C000C57DC1AA8719FDCE423A32FA9D35947EDA
+:10B2D000EFE07FE60EA5DFE351F7BD0947E1EAFBAA
+:10B2E000CA7163BA7D6CCE3C886C9C61F87B506CF3
+:10B2F0007930127EAF90385C5D51F3A728EF0F6F65
+:10B300002B1AA4EF62A4EFF78E4E46E3ED4D7FFFBC
+:10B3100017110FFD4F0674FCFD12573DF922ADB316
+:10B32000777FF89C6A505C07A2D26C5686C19FFD5D
+:10B33000C0CA2BB90F1CAE79E0FF2FFA356B7F0D19
+:10B34000EB02F7998C6E54DEC3D61DD1217D61A32B
+:10B35000817A335D46F35E99E6EB61657AE7C578FD
+:10B360001F8517EFFE62FB3ED02C3DF1BE8395DBBF
+:10B370005F5D847C978F9EF6FC759CFF1CF6FD013B
+:10B38000F77AF5D65FC9D627E9292F7DD33B7F8190
+:10B39000CF77EF0F28783EE35D71AFAE97EE59FCA3
+:10B3A0008B73F3A38C431DF7F0C7601C4AE0293F61
+:10B3B0007FF0753ED2FC468BBF77A2868B8F6C3CAC
+:10B3C0001E3E965BFE4F2CE6726325F434A2E9EC38
+:10B3D000B55714485A132BB3F01E46FB82C17BF8B5
+:10B3E000BB32F9853A7A77931CF7CA8B9590FBF7B5
+:10B3F0006FD516737B71E58E9D67A15C3BBCEB47F7
+:10B40000C49F2B1F7E55C57DC79E2D3F50FB6AB341
+:10B41000EB01F543DA81EFC3DFDF79169707B9FD5A
+:10B420005E73C57C563DE1EE7FD5C3EFB9FA5F612F
+:10B43000F592BD30D2386F2BE6A538DFB7F7F9E9C2
+:10B440001EC2B77BE5C65C76F0E462BFCB0EEE7839
+:10B450006ED16FF03CECCCFD21BA7F717BAB39FE35
+:10B4600016B4DFF6FB457CD1FC1DDAA5DB9F0B9102
+:10B470009F67FBFECF503E90DDDF631E7CCE79DE02
+:10B480005A1061FDCDE94BCC948DA172A3EE00DB87
+:10B49000EF39F8E0FAE71AC7A3DCC7FDB181BF5F57
+:10B4A0004E89D3392C39BA88F2CC65DDA70773EA07
+:10B4B0006FDE9F3FCCF7937EC698CEFBDCCF3DF688
+:10B4C0001FB47FEF88FB72E2E13E817FFBF73FD93B
+:10B4D000EFD74B9C6FAC67793C24DFFADAD81C8B32
+:10B4E000573354DEDA5C17C7B8CFB5C5FCBE9EB182
+:10B4F0006F18129E2D99DB674CC7F917432FE0791F
+:10B50000FFDB9BF5B8333E5476D86CC17A67BF0930
+:10B5100071AC87E3E27E6DB4E35AC5FCDCF3907155
+:10B520006B7B092F858CAB9DC0B8B79E8271C327FA
+:10B53000806780CD058DEBCDB3F28EAF4EE379639E
+:10B54000DEF192B63E10F1055A7AC3F8DBFCA29FF9
+:10B55000A5C586EBF7958192A17BABB3791769A955
+:10B560007326C6EF06CF1B2734C77963F69DCE1B23
+:10B57000B7993C0F96B5A375D025FC1318CF5CE6A0
+:10B5800080F705219F0215A918DA5F9D79E211AFB6
+:10B59000083EEF8C346838999DFAF4E2BE61F48677
+:10B5A000B2E69B339CE792153D23B9E2C8E6EB7403
+:10B5B0007F56BEF6DEF8A20D7FE7CE7F82AAA9985D
+:10B5C000379B80D61C706E17EB07EB5562BD581287
+:10B5D0005A1CF5D4189FA75DEE147EA1576E7DA569
+:10B5E00093E2F679F0B443D0F30574CC97D1F64DDD
+:10B5F000C3F86F57C44772B22B98FB1EFBFF2CF6A3
+:10B60000B9E4A48AE71FC90FBB8FF68DC6B1974D69
+:10B61000BC1FE9D65A95FC6091FAFD543E6AFAC8FF
+:10B62000FACF871FFB3E83C1721EFF53BDCEE9BB1D
+:10B63000DBDC46F9B1D74D558DE1F22D426BA6C545
+:10B64000316F425B73761CCF6B876AF8EF61D8303D
+:10B650000FE26106DF863CFCF13F58523CAB0080B4
+:10B66000000000001F8B080000000000000BED7DB3
+:10B670000B5C54D79DF0B93377EE3C813B30C0F082
+:10B68000BE8310D1623A28A2363E2E0F0D3E62468E
+:10B69000C4A809D6D13C4A2218B436A11B1B2E02DD
+:10B6A00082F8C2266BCDAE4D47A22D6DD31653DA6C
+:10B6B000358FF61B4C74ED635B626CE2F6D30613B8
+:10B6C00037AB59D365B7CDD6ED9736DFF9FFCFBD90
+:10B6D000CCBDC30C68DAF4B7FB7D4B7EC9C9B9E7B2
+:10B6E000F53FFFF37F9FC77C4AE4089949C8EE2DD8
+:10B6F000840C151342F8B08DB808D95762B2433A9A
+:10B70000284F4F1AA6E987F0B7606C6A6DFEDB1907
+:10B71000553322F9CEBC442E48FBD999F73819A6E7
+:10B72000A9F5831612A0EDAD3C91FB69EA96C960BC
+:10B730009287E6E55B7C561F4D5D24C3544ADB953A
+:10B74000DFC2EDF08DED7F30E711EF5BB45DBA4CF9
+:10B750003220ED2C17324C3A787ABED04402749CD9
+:10B760008E72612DC0690D7F9E480991F2274513A5
+:10B7700021A9F47B5D8F2CC3FC08C90824C03C4977
+:10B78000468DAE5E0F47D6F4178F1DFF10E087B6CB
+:10B79000DFAD96EF9BF3CEA17B29FCA22C95986997
+:10B7A00037FB06AF92FC69341FBE2A73302F0F9906
+:10B7B0006E2763FB817A3E5A2FD11B241B00CEECEF
+:10B7C0006112A4E327160D1398BF43229249C27E4B
+:10B7D00010FEA4D92344A1F592E60E7B9569BA7EAA
+:10B7E000FE608E09A719E649D7D1D15CEA2F48211E
+:10B7F000C4D63CDF5F40D725811F2222ED2741625E
+:10B80000F88F6EF7CF490C3F1A5E7ACA6F490AC6A5
+:10B81000E87F747D5BCEA4F1165DBEBC670DE0DFF2
+:10B82000E2092A30FFC4D90C2F5A79A2344C643A69
+:10B830006E2261F324A5443E4693845285C0387439
+:10B8400048593F9F07547A7C409D0FFCC969588F27
+:10B8500010FA29415E74D57C2BE479F256112BFF46
+:10B86000D0477041DFB2A979F3D87CBCF94C94EE93
+:10B870006A21E42DDD7C6DD974FE5ABFF4DF1E0B06
+:10B88000C900FC7E54BC09DE61A407EDFB3675FEE1
+:10B8900016CF30E2670CFE8A19FE9CC50C7FCE28BD
+:10B8A000FCED55DBEFFD2F86BF513C71A63540877F
+:10B8B000D178D4EA578CC2AD205DD276847C0AF26E
+:10B8C000816AE0DF1E3BCB1F12EFAC06FE00BE9A82
+:10B8D000805F08C9A44D7AB82E28CF1545ECDF7AD1
+:10B8E0001F9507FA7C50930F6C5C97CF5F4D283DF6
+:10B8F000139F891CA328ED9AAB7861BDBA9153229E
+:10B90000FDFFA33809EB774A8289FB244DCF2C4CED
+:10B9100007B9D966EBB1C17CBB2C3DD84F5B8E49D2
+:10B92000EC8D21DF4EABF335373B671C9D111F8F2C
+:10B9300066810463F1FDDBAA7C6B1B7CEA8C99D2E7
+:10B94000072F09929DC20B4CFFB6B6BEF9B43DE974
+:10B950001FF2F9609C441CC7A5C2E52A349156DF4A
+:10B96000C4701E57E98A6FB68F0B270F70C69033CD
+:10B970001A9CED00A7273E9CCE9C0AA453BED985F5
+:10B98000E30C8A125B0F4B936D239D9FAB35496A85
+:10B99000A5E92EBEA9AB0ED2210B5168150B91CF94
+:10B9A0005450B8F969D309A1FD745C9A659B04B43D
+:10B9B000DFDC43023A391F74042F89B43F5E0C92D6
+:10B9C00020859377293280F1AC4A07DABA91A264D4
+:10B9D00042E6D0F182FC0C90A7CEA080A9D68F467B
+:10B9E000274E8B4CC462E8C7248740DF416773222F
+:10B9F000F5E6BB19DEDAE6860354F691EE129EEC0C
+:10BA0000A09FDA8B28BD24D1BC45EEAAA3F8E87E1E
+:10BA1000D5427A757CA08D9BEB66FAC74E6A93C2BD
+:10BA2000D0B7F9B037388E3EB603DE68BBE60BBE42
+:10BA3000EFBCA2E115FE15133CEF38917633809FE1
+:10BA4000DF27C5AB4DA6F8FDFCAE45FACE2B3A7903
+:10BA5000D54C98FE20444A5F312D7EBBDD2D6446D7
+:10BA6000416124BF870F213EBB5DBD5DF9749E8A95
+:10BA7000DFE42FA4EB45B24B0D788A4E096965725D
+:10BA800070CCBAAE96C2B47D779189B702BD1690DC
+:10BA90009019F092ED41BED4D635E8607463F13070
+:10BAA000396976C998DA008F20EFCC7BBCE3C96B8B
+:10BAB0001BF0490C3C16B9291E3FF1DF0F8F1E37D2
+:10BAC000C1D499509304F8232FEF22D23400C3C875
+:10BAD0007F5A3B8DDEA3E75FFDDF7CFE1A9DC4AF7E
+:10BAE000AF68F6103F48AB660549A89BC37CC0967B
+:10BAF000864D29E854A5D8C2ADA09A72EAFA334E11
+:10BB000011D0CFEDE23B36145DFE0F53C6EB9F27FD
+:10BB1000EF68F83447C6D3E3C7047AE78C25748C02
+:10BB20008BE02941FCB47790DC089E9A6C208F3A18
+:10BB30005D5BCFF84A2378EACC7E4EDCA0A3F72BDE
+:10BB40006285E2A6F8D809766D0C7972AFBBA21DAA
+:10BB5000CA05536C797E48956B5480F30BE9380B1A
+:10BB6000468C789AA7E2697EFA3B8FC134A994E4A7
+:10BB70000915C815017F15E0AD6A4D00C882085946
+:10BB80001F7C2288F45025025E3865B2E943E78DB8
+:10BB9000E32F1EBE5C1C09C482FB19B1E6881BF4AE
+:10BBA0004931C59BCEFEA08421A27CD4D6C5E5999F
+:10BBB00080AED8BABD7C31DDA4D0AA9D5E5308FC0E
+:10BBC000190B69EA02BC93736602765A5A3803CBA2
+:10BBD000ADDEFC10E8BBB4B09DC8E82788213BADC2
+:10BBE0007F70ED5D7ED443D76F23614A3728CB4009
+:10BBF0008E65CB61B0A779512A374B30CEA336F092
+:10BC00006F3ABD354984D9DB24961ED8E20EFE007A
+:10BC1000D68DBF3E1FFB33D998DCBBD1F97C69655B
+:10BC200022013BC07E810B812E3BB0727ED77029F2
+:10BC3000C8CD841E2B4DDB78250C7A4CB96097005B
+:10BC4000DF5B0B95DB4D342DFF95BD88A7DFBB383F
+:10BC5000871FF0D05548979CF6F3BBA79C2142F371
+:10BC60003B572E1F49827E8E9A25287FF2C3A64F0E
+:10BC7000823D65FB603FFA8736D53F247CD32C5844
+:10BC80003FFB479413BBF91EA4FF5D05D36D7AF902
+:10BC90009EEA080E035EB4BCDD4BE5DB0CA4A7B73F
+:10BCA00086293D99148E7C48E9D3E6DAE63D25C124
+:10BCB0007CE9778D3E7C917A11BE35E63D14D760E4
+:10BCC0006712726431D8919D206FD06E250A07EB00
+:10BCD00096C1CADF3FB06231D8A19D76AD7CE562E6
+:10BCE000599F57FE7006F3AADDEB4FF6EC82FA9EE1
+:10BCF0002CD2C4F01320AB74F64C41328FEBD6E754
+:10BD0000967FEFD6D9CD1A5D761530BA7CF9626789
+:10BD100035C8CD4E4A975609E87097C14FD6528D17
+:10BD20000E3B0B189DC5C3BBE57A0909EBEC408BB4
+:10BD3000A707E9D1E609A01D1D5D7F450AB363345D
+:10BD4000FAB77909F2834D0A3E753FF287CB0FECC3
+:10BD5000672D68221CA5138BC8FCE189E6110F3EF4
+:10BD60008DFE3B0BF215A0D7F745E227E3D4B75C75
+:10BD70002FC5F96C71CB93927578F4E451BCC798D8
+:10BD8000CF5792D97C3A027581FB69BF72BDA4205E
+:10BD9000DF7889BF1BF412257FB03BA9BDF9C9E448
+:10BDA000543D9E983DA2F5AF704D8316E0730F6D24
+:10BDB00047BFB6939714587A8B2764E0EF2FA604F9
+:10BDC00067EBFBE145E61F2E34BB4CE423E0673F05
+:10BDD000F5CBC293A99FD82262BAA7C58B69578BAE
+:10BDE0008469778B4CC256EAFE90EBE7EF053BDBAC
+:10BDF000E540F826A28B8E163FB66F6F99CDFAE11B
+:10BE0000343A9FBA0BE8C261D2F8C4BF0BE83CC910
+:10BE1000AC959761BE8763E58F242F58AC14E37C03
+:10BE200050EE754D30AE395486EB77F3FDABF25BD7
+:10BE3000C5DFFE798F54E703FDBD6126FA38C618C9
+:10BE40007A09B3F16EB4FFAE6C13CAD3FDF3769EDC
+:10BE5000F1D1BCE575DAFF78F4D8C3FA8FDB9F0621
+:10BE6000EFE02E84D74AD7DB4EFBB38A4CDEC7E324
+:10BE700087E8F9D294207F7808CAE9FD836BC9CBA3
+:10BE8000C09F7458BB087C1A9021DE25B4531CFB5C
+:10BE900041DF06C2CF80BEB571E418CD0B2ADF505A
+:10BEA000B5AFBC4CFB11641BE9A6ED06E7DD45A070
+:10BEB0005DE72B360A13A5D3947CB417EC85B5A4A3
+:10BEC0008DD6DB596D2766FA3D69FE1A02FDEDFC41
+:10BED000991DFBF79D9982FCBA4B647C34A11CF23E
+:10BEE0009A4858AFC76D8E483E1FE4E57D24300D5B
+:10BEF000F9FA693D5F533DD90BFC24902A8570A067
+:10BF0000871FF0333B4451E569E05832DA81016C18
+:10BF10001FB10B9B8808FC7ACE1CEA06BFC4DC80EC
+:10BF200046DF22F361DB30F2B5BC3CA38C10170373
+:10BF300081ECF287492EE025C34C6D31204B818482
+:10BF4000A9DEE8A1FF007CFC85AB17C8AD84A4AFD7
+:10BF5000110CF3E02F382F996E05F8587D4D0FF135
+:10BF6000171A1BA13E4F74F5D19FA94B1ACF2F8CE6
+:10BF7000B6E30793557FD0497240EFB5B79C206F69
+:10BF80005B22FDF05171252DD5ECF9875358DC6209
+:10BF9000949E2446DF2F503F1DE8B1E31766D21B65
+:10BFA00083BEAF27FB0CF66E46D014991FFDF795A4
+:10BFB0008BD68A8306FA1C7FFDB3EA8DED739A1C3B
+:10BFC000063CE635271BF23E25D3507F5257BEA1D3
+:10BFD000BCB067AAA17CF2A1E986FC94D0A70CF5BD
+:10BFE0003FD15761C84FEB5F62A8FFC91335867C0C
+:10BFF00049F86E43FD1967361ACA670E3D64289FDB
+:10C00000757EAB213F67F8AF0CF5BD41F1E409E067
+:10C010004F4A8F668AAF5D19CA21D09FC36DD48EF7
+:10C020009BCFEC63D0B7249BA8F631554C694057A1
+:10C03000ECAF1DF400C8F93D8F85BF807AD2E407CC
+:10C04000FEE50B16C91BA15DBB68225E9D1C911607
+:10C0500011F85EB1C78DDFE5D256E40F81AA0D7BE2
+:10C0600022E86DE37A10F376D20FF0BDC1E0E3452C
+:10C0700025A67C12B28DF46F25F72405C6B1FB2CE2
+:10C0800092B1FECDD2BF2F45A5FF1C4AFFE689DB4A
+:10C090006B74FF90499E9CC2FCC3AA731E83DF830E
+:10C0A000781DF57B6CA41DD8A9BC6E24EB14ABAE37
+:10C0B000FA3756D3879FB871FF269ABF684A714EE8
+:10C0C000D7C9CBE4B566DF8FD587330CF65974DA60
+:10C0D00096F810CA3B2A17CB530C72315005F31354
+:10C0E0007819E5A2F6DDD73715E57297C8EC944EBE
+:10C0F00089F2E538F88A96CB5F4E9698BF18473E8E
+:10C100000B54CE82C2DDB9F2D35D8037791B41BDBD
+:10C11000447510CAD9E8FEA95D7537C2E965F4A473
+:10C12000F9439ABF65A3F203FC2B9B44105F568A28
+:10C130002F27DA478FA27D49E721817D64F550FBE7
+:10C1400013F43DB53F99BDF9E7B52FF361DE7AFBF6
+:10C150004FD5972187DC94921ABFFF17E3EC479DD8
+:10C1600049D6FCEEFF9EF427A718F1A1D1A146679E
+:10C1700056203A3ADEFB125B77DA2291D3F62F246F
+:10C18000F84F10E9E5D4ECB34A25AC5BD0255BA9A8
+:10C190005EDD37BB06DB0993780272266178C33215
+:10C1A000D093A494C90985FE03F4E62836CA0D5B32
+:10C1B000941E15401F278ED5BB9A7CD0FCF389E4D2
+:10C1C000CBB752D438D92C324B2F5FE2F9E19A7CAD
+:10C1D000D1F0B0E0831611ED8E0F68B9664FD07EB6
+:10C1E0002C397C00E2CC829FC84762F0DFCBAA5E8C
+:10C1F000EE3B6997812E5D6B04F4B332FDE172C8AA
+:10C200006736113FE067F670980469FF3FF4B0F5B8
+:10C21000C8F48738B0CF332F873880F3A085C58521
+:10C2200032B785387DDCE89AEAC7FDEEE2A37E5896
+:10C23000F78A3C17F2E9671713A48F21EFC69E72A5
+:10C24000D857984BFCC03F2E0F4F32217FDE1A4249
+:10C2500079E21F51A8AF4392E944614DAFB490E930
+:10C26000F751FFFDDD161BA6D75A444C2BF38A0766
+:10C2700017D07A5B7D0E8C1774E43B709CCE5C010A
+:10C28000C7F98F9C87F2C02EF8758B17EB773DDED0
+:10C290005404F184CE93FF8971CD083D53AC7901EC
+:10C2A0009E30EEF710BEC90BFBBE49F20CDC27ED49
+:10C2B000B404FF7103C413D70AFE6331F837E9E50C
+:10C2C0001FA19F0CF8013CB4DB195EACCE26BF1B4E
+:10C2D000E2FD93C8FA15B1F854C513A530B340E98F
+:10C2E0003789910611E686DA1241AFFA493F059B7C
+:10C2F000583A421CEC8790074509E245D9B6D02050
+:10C300009467D78BFE36AC4F705F415B278B9D04E3
+:10C310008EBBA05E98DB42BFBFE811D9FA0D8570D5
+:10C32000DFFD37176E1FCC21F1F97B4F4BF5D92A72
+:10C330005D3CD64562EF0BFFCB6D15160FEDF77622
+:10C34000806D26ACF7AC71F5E38DF67BBB8753E3CC
+:10C350001393D3C15E6EE663DB996691AD0FC47F24
+:10C36000C08FDE5A28A5BB5DFA7E183ECC279FC73A
+:10C37000F57116B3F9B77DEF8DCD8F513AF977DAB4
+:10C3800010E255AF5CFC0CFA8FEF254BFBC1EF526E
+:10C390007E6C26B0CEEF7D7FD669589431F36E392E
+:10C3A00093CCEBE249EF7DFBD5320BEDFFBDE75EB1
+:10C3B0002DE3510885101F5A79E387AF9541FC4A58
+:10C3C00068FE4DE6650AAF52418A9A204F0D68E635
+:10C3D000876E591A1E076F07D31ED802F1C2509BF1
+:10C3E0004BE4A8BDF625E71F05A0C766809FA60FF2
+:10C3F000DB4676727489B9F4779754D1FEB6728AA7
+:10C40000E2E2006F8A15FC0A72C1EA07BAD95AC87B
+:10C41000F4E5D607C59002722CDCC4C8DDF65AE6F6
+:10C42000652A87ED3F0DC11900D2CE052A13207E63
+:10C43000378D20BDDF76AD290FF695DD44C8073A6C
+:10C44000B498CCD8CFC84567A817E56FD32C9043D4
+:10C45000AD171F9D0CEBF57B55BE6871B73453D3F8
+:10C46000813A1FC4DDFC1877DBCDF7639C3EDE7C90
+:10C470009D5EB6AFC0571235DEF5DBEE7076841EDA
+:10C4800034FE8A6EB7B785F861BC975A6C98BED0F7
+:10C4900022627AA2C58BE9F75B244C075A8A30EDF9
+:10C4A0006BF1FB0B2C00E76C4C3B2C647D40476729
+:10C4B0005FF0B0FDC87B92CABF0074FE24EDF73276
+:10C4C0006DF745DAFE32AD3FAF366C86B8CCBC11A5
+:10C4D0002A2F2528EFC2EFFB697F506F6CB9AD049E
+:10C4E000CA4BABFBC380C7D262FA9D407F7D587FA9
+:10C4F0007FCB093F2B1FAAB450FC96FE96953BE7D5
+:10C50000D27E68DEA9F643C72F61F567637F745C4E
+:10C51000CCC7E8B784C173A224163CD1F5A9956FA6
+:10C5200026548F88F0BFE0EF59240EF75138123EA1
+:10C5300006F2F882B51CF4E79E12926FA2FACD9231
+:10C540005AC041FEA966229A4BA8CACBA8D9554E1B
+:10C55000A09D8CDF95557CE8980FF513F6ABE9A705
+:10C56000E4EA30EA9D243FC937BB69CAD381A753A7
+:10C5700054DF4722E70D503EB13CAE076D2756937E
+:10C58000C8790332717DAA5FA2CA63D3DB474D210C
+:10C590003EA63FF771701EB1835F4B7DFD7E924BCF
+:10C5A000F3AA7DF645B5DEFE7965491B21BFF8810A
+:10C5B000A7200EFE1BE2E5603F7EB47D943D77B878
+:10C5C000E54C5A55A1AA1440DE6F138FE8EDDC6CE0
+:10C5D00085D2AB8E0F7A9AF8EA5E8C2F04336A7498
+:10C5E000FAADC312CCA0CC4BAE3FF18F8B413E8055
+:10C5F000BE06393D7784E9F751BDFE5B261F357BCA
+:10C600004250D76B9FBCB12D01F7D3A83E92C0AE6C
+:10C6100008920ADA3EB17CEBCBF09D9418BF270854
+:10C620008C8F32BD210EF2999EC04F3CB0DF907CC2
+:10C63000487E86CEF7B7035609E8AFEFE4DA7A888A
+:10C640001B3E4C12253BED27F3A54B02C0D1611ACE
+:10C65000168008473CCD4B786A0775089A9CA486DB
+:10C660000F5DFF8E34552E90DF7757D1FA074DC1FD
+:10C67000AB54578ED63FE8086E813CFD936D54AFA6
+:10C68000EF1D8DA36FEB96294DEC55E3E6239ECF6E
+:10C69000762BD990A7F5DD2CDF4EDBEF750F794DAA
+:10C6A000349FC86DE93E930379ADFE966E85B6BFA3
+:10C6B000EA61E700882BE803B9379A17693E41978A
+:10C6C000E7599ED858DA77F23F05D0431D6923A772
+:10C6D000B3009F3FE4FA41BE36BEFCF541C86FAEE1
+:10C6E0002712C4E7324F1CC175F8AAB97C04F0D6F2
+:10C6F000D7724644431DFEB475A176EA142FC17863
+:10C70000B210E242F960BF15F798D07EDB4E49B017
+:10C7100004F0DD9506EB5C91C6FC812921DA8F8E51
+:10C720007FA650BEB34E0775651919D6FB5BC46F63
+:10C73000027811E5F01FE57F2F01FDD4375B714CC6
+:10C74000A5E36DDAC0FB5B25D03FA15601D6FF04FF
+:10C75000877AC2772663C73768FE5A7F4A2FF81B4D
+:10C76000961D8C3E37F9FAD3A6D3B4C3CEE86293B4
+:10C770005BCDBB8DF976D59EF4BA157732FDBEF947
+:10C78000C4815C3000AF1E9B857EE4660D1E720086
+:10C79000E1B93A3827E9363ADFC69FB2B866E340D6
+:10C7A000C912987FE31E13013F6EF300A5271D7F7A
+:10C7B000ECA37C284FA6F3907BA6F2943E02070BD5
+:10C7C00096DAE9FA7E3D5F16015FF569B7EEB6517C
+:10C7D000E7E8EB823805E8A13EAD7437D0D3A6393F
+:10C7E0006F213D26A596FEA49AE2EBE8DDD54B40ED
+:10C7F000ACA599185F5282433967766F43FCFF6B93
+:10C800003919B1BA119DB8CF9907FF47E19B2CCADE
+:10C8100015505F5C465D22A053217012EC10A5C23A
+:10C820008671D20A711996E7AE21A66E0ACF112938
+:10C8300039B99536B517C826B053F2030E8C7F9AD6
+:10C8400013AA76803F7AEC1CCB47D6E912E2C55199
+:10C8500014EAB7D17E6E71F122F8226966D906EB2F
+:10C86000467979E85829F00BB303942F1663BCE797
+:10C870006022A97F8EB63B6ADAD8FD235AEF68B2F0
+:10C8800087805DD9C171EB6BF07BC5D4AD743D8EF3
+:10C89000AAEB6776FB4558AFA36E637E2FB7F141D5
+:10C8A000C0DB23A92F2E81F9A559E59E140ADFE7E5
+:10C8B000525FECF666209EF36DB4FC737FFD42B7C9
+:10C8C0008DE2FD68AB9C29EAF293FF40A536CEE3EA
+:10C8D00005E453DEFDC587808F69F98F6D54FF7EB7
+:10C8E0003D59B307587941BEC6D7D4AF9D4DE168D5
+:10C8F0001DCD2BB622D8F78AD4AFA27CFED5A7CD0A
+:10C9000044EB1FEC09C79C7E9BC38CF3200EB067E1
+:10C91000A6F168CF38DC6C5D1D53F2D14E3A6A67E0
+:10C92000F81AC93161F922F3B322C407AC53781362
+:10C930009EE5214D01D0CF7C364F58BCF7B03C4529
+:10C9400082B029DB1FE47A56A07F682FD2ED071250
+:10C95000F0638DFB877C54BED03A9C61A27AD87379
+:10C960006105974BFBFB6CAAEA2F7A4806C4631F4C
+:10C970004D6572E6D18072BB45021A1B66E75649C7
+:10C98000603AA4E9EB0AD2C73BBF32F65C4018ED2F
+:10C99000B23D2E938AB749BBC305D45E763D27824C
+:10C9A0001CA16A7EC761D06F1E1EE9A610F89FE623
+:10C9B000B7B9591CDED7B7E44BB3C13E7CB5D00440
+:10C9C000FCCF8B7E11CED99527942681DDC68FD2E0
+:10C9D000E9EB4BC240378373EE043F5000FEA59F46
+:10C9E0000FDBD9F9D0910CD20F7161DE2B13FD3E14
+:10C9F000A1C6BF3B5B6C98527FFE5DD01F5FEB22F0
+:10CA0000B84F2078039897DA09077CF1F2A7EEC6B1
+:10CA1000719FE10349EB40DE9E63763D900BC63982
+:10CA2000C24F7010E778DF16488279EF771BEDBFB1
+:10CA3000B23466C776A632F9D9D9C2E2A0C2F54FA0
+:10CA4000605CA7C3A2C923D7D2F05CB0E783788E1D
+:10CA5000D61ADC2683BCB21145117571725BB631F2
+:10CA6000DE255CBF95C58752D938D1E70D5C9CD6D1
+:10CA70007FC1EEF1FC032D8D3E9FD04C02288FC864
+:10CA8000103BF7B06D57657AB2AE9F6D9C9C2E8EB1
+:10CA9000431F0F5F379390EE9CCAC3FC8800F37965
+:10CAA000F8BA80DF897738B115F66528C175C33AC1
+:10CAB0003EFF5DD44B0ED213860373568853E8CEE7
+:10CAC00085122F3F324AFFF911FEC07D752E067F79
+:10CAD00048C67CF47EFAA3E03BD37F77387F2DC035
+:10CAE0003CDFAB242360871232BC08F8B7B1D28197
+:10CAF00071EA87498FCD06062EDF23EAE3C58D0351
+:10CB000097123794E23E960476F0C32F951BE254B9
+:10CB1000DAF9302DBFF9C4068C1F3E7CF49A30B58B
+:10CB200014C118B2507FACD1D673C69A1FA96FB783
+:10CB300004952CA0FF975AE52CFAE95B00279CABE3
+:10CB40006A9E340BFCBFDF8AF519802727AFEA8F76
+:10CB50003536D41FED76EAAF019D5E9C8CFA9416B3
+:10CB6000F3A09FB5F15778181D8EA8FE7C023533CF
+:10CB700001BF1D8EC01566B41399A7F64E47B24685
+:10CB800037CDDDA0FF0E0A11B908933DE860F9E446
+:10CB9000B4E6EE76A687B1FEC893FC6EB0873AEC99
+:10CBA0006ADE43307F50E8413F41F9BE5502380FFD
+:10CBB0003A027EF007951D5324D02755E92E9C8715
+:10CBC000E5EFACBD200F333DC1AB60B7100FB38FA5
+:10CBD000DE4BBD904B5C31FB19E16EA41FAFB11F62
+:10CBE000FB5C36FE7B9C39B0A334528FB60FE3B9A1
+:10CBF000807B6C18FFD1EA1FB618ED642D9D92C69C
+:10CC0000E20C204F80AFB5EF42F03EE45F2B69426B
+:10CC1000FEB57A8DFB451A3F0BD7A718E297DF4A7E
+:10CC2000F5E1FA687240B85E8CE59D2A9DEE847D40
+:10CC3000F471C7498E33CE0C9413F1C72953E5081C
+:10CC400051E3493C9E33D3F824BEBC30C671A3E502
+:10CC50009F966AF2EF884AC7FF600F2E4CA3FFFF32
+:10CC600050A87F91035B076F85F5F9A36AF716F566
+:10CC70001D3809E47745945B5353E13C957C1CD205
+:10CC80009BE59BFA3436DE5839C6E20FDB1E945022
+:10CC90003F3FC3FB1DFE1870D75F771AE4577EAA8B
+:10CCA00084FDD5F30ACAB1FAEB8958FED1FBB793DC
+:10CCB000D08CF1FA7761F968FFFDACFF973FF5E39F
+:10CCC00083B3A1FFE3169355E7CF6D3BBE301DE262
+:10CCD00095DBEC542E1BF95606BEE57D64D40F029D
+:10CCE0003EDFAFF945CAA2DD5573C16ED5F1F96CCF
+:10CCF000B0BF22ED79BACEFB1D5AFB3B77833D34A2
+:10CD0000A6BE33AA7EBED6FF6AEC3F1A1E4D8E40E9
+:10CD10001EEC2DFE0F560D3E9443074C51FD8DCA5F
+:10CD2000A520F6B7690EB33392FEBAFE270A0FF4B8
+:10CD3000172ACF023BEB4122C139E768BC27A9740F
+:10CD4000587F7D92615D23F8BEC5F0FD9F5BBC24DA
+:10CD5000A4E3B7CF04B72D027E4BD2D689283BB1CE
+:10CD6000DDE12C12D2F1DDFFC0F151E1B82D0E1C36
+:10CD7000F3FFC270F80C7C1981A3C0F0FDA3C2615F
+:10CD8000B65DCFBCACCB5B4492A5CF97846D599771
+:10CD90007576CB8C33A2213F73C86BA83FEBBC6484
+:10CDA000289F335C6428BFED8ADF909F3732DB50C9
+:10CDB0007FC175D9902F278B0DF52B6D2B0CF98525
+:10CDC000E25A43FD696A9CFC76EF0643BDC5D283F7
+:10CDD000867A4273CA77C07E59F0C1021BF8173BAE
+:10CDE0005DA6EA10C5CF4E3E684B8E211FCBD47E88
+:10CDF00047F59D370DDB2F149BDA411E2EA4AE7034
+:10CE00001BB5D7D2EB02EDA0F7AB45229AD16F0E3E
+:10CE1000B1F8C9072BABE0FB9D8B89D8ED8EE46F91
+:10CE2000FF2B42206FCD96F15C9BBDD884E7067640
+:10CE300017D78CBBFFB04FB5DFF744E9FB51FA3190
+:10CE4000B3F393D1DF8BD3195D1D58B08FC03E81F2
+:10CE5000CD15C27B3E8353767A21FFA505DFF6828E
+:10CE60009FD135E5112FD04F67CE570DE7F21C0546
+:10CE70006C7F26BADFBF55FB2DB8FEA80DF4E7EE98
+:10CE80006C86CFE87ADAF9F4DD361637FFB8E6B902
+:10CE9000F8639AE7E5746667EDB68530FEDF5DF40A
+:10CEA000F1C07FAF3ACE81058F1306EFE3780EB95C
+:10CEB0002B4790F47A564BE1DE28CCA7D3B7D30B9F
+:10CEC0007AB7CBF788C1FEB7C27C628C63F3323C81
+:10CED000ED163FDEF93CFE27CF6767CC7D775B9C84
+:10CEE00079156BF3F2AAF7283EA6793DF5179E5700
+:10CEF000581D2F359DD9A7BB25C64749E6C0CFF39E
+:10CF00007DF1F92F69B6F19C5282DFE807E417043E
+:10CF1000C63D7F745EC54F3C7E5D635152018ED726
+:10CF20005BD839DB7380479A9E0F4EAA80FB0AAF0D
+:10CF3000C3792D0EDAEF48186F1DD606CD063827B7
+:10CF4000920F25E9F9888FD56B8CED56059CC6F3B9
+:10CF500052EA39038AA7FD105FD6F036669DFF4C72
+:10CF6000788A476F378AA7EEA29BC3D344F49D9A71
+:10CF70002E21BD4C84278D8EE2F5F3FF2A1D2DBE98
+:10CF800071FC20FD7CDCF8F9AF463FF7A64B37C4B7
+:10CF900067FFBFE2E7F11BC4CFE8796B81D4C73AE2
+:10CFA00007D2E915900E27734D6717839FBDD88C64
+:10CFB000F1B3D70E1734927C7D3DA6075E5B36A990
+:10CFC00011CF8F553BF1ACD65953EC7E5F53F1F145
+:10CFD00090D7AD9EA7F3A782DD7BB67AE5B8F322A2
+:10CFE000CBCCC6F38BC411999F99F64BA40A8C9FA6
+:10CFF00051BC1E1B67DDB5758B37DE8DAEDBD9EA04
+:10D00000B69B5A376D3C8AA798EDEEF6E6DF10DF47
+:10D01000C309768637761EA0EF7166B7F701BE6941
+:10D02000BFBF84A20CB0FF09C6FD56AF493F02F056
+:10D03000BEE665F1F001416AC47741562EDB0DE78B
+:10D0400051CEAD727310D2D0E038A6AE67595D6C88
+:10D05000BBF339B53CD29E2393A5B1F58EA876CF0C
+:10D06000AA3A0EED07C2CB39FA773FFE21AA3CBAA5
+:10D07000FD4BDE442C3F17E73CE6B7D4F6AB6BC75D
+:10D080006F4FEA53F0DC1F21528EFE3EFA285DA955
+:10D090007CB0C21BFCBE97D67F9D0B7EF973104FF0
+:10D0A0009DE2C2F33D84273ED8F71FED8797F1BC80
+:10D0B000C6E54686F7E87E75FD85BDA9F1FB8B8741
+:10D0C0005F6D5EDA78A524807E1DA926E27E36BEDD
+:10D0D00019CE39DC59499A707C5E427852DEA4FE42
+:10D0E0009C2F421F174CD23ABC48A3F633F0FBCA20
+:10D0F000A5D0CFC05993B8C3171FEE78F2E09F5464
+:10D10000FAF198833BE05C0159CFC53CB7F72BAFF0
+:10D110001DEBEDF78EEED7E338B73C19B448B4DF1A
+:10D12000BBD4736784047356E8C6DFAFCE3BBA9DA9
+:10D13000C7CCF6C7C91B66C45F5FEF4339B1F8E7D8
+:10D1400035D55EDEEF2D32F8C7B5812D16B06B6B8D
+:10D1500097ADB0482E289718DDA970F409C19C122C
+:10D1600057044F71E58F8A9F81F3413CB7B1BE9957
+:10D17000C373C7C5DB19FDADDF3E686AA4E911952D
+:10D180000F57C03E93AE3F77069B5F5FAF2317E01C
+:10D19000EFD39FBFA0707CFA10C1B89D2DE3E93D8D
+:10D1A00010B71BE6881AE7332D87FD8661755FACE3
+:10D1B0009096B702BC55A9C8E7EBB7AF403FFF96C2
+:10D1C0006AE6E70F0804CF01BD392F2104EF1D10D7
+:10D1D0009B3CF828CDBFF58724D2ED8FD0C71342F2
+:10D1E000781AD0476A5BE073B1E2D35206E3F3DF0B
+:10D1F000BAD83E5E3CBC9C55E5A956AF86972CB18B
+:10D20000EAAFAC36CA350DFE146BF83D12239E3ED4
+:10D210004A8FA1F1F5DD2F5439FD5A94BF547B3E5E
+:10D22000B6DF3237433DA71BAAD884FA4AB14A7801
+:10D23000B65885C7A3AC467C7EB8948890BFD32AE5
+:10D240003D0DF0DD556B8E92C321EC67FD32A76179
+:10D250005E4FF4FE781ADC4BCA2F60F2F7FD2217FE
+:10D260009E137F80340970FEAB8E28F3912F896462
+:10D2700001FA3EA7E24F83EF1C91136682BC683629
+:10D28000C7E4AFBB543A3A17A85C85E7DFDBCD783B
+:10D290001EE1526DCA72887F2B018B1F8E375D6A2B
+:10D2A0005F9970BF6E5D35BDA7D935E78395E3EA19
+:10D2B000AF5501E37AF5093DB8FFA75490A66394F2
+:10D2C000CE267FF9F2DE59347F36642A61E7DCD856
+:10D2D0007CCF86B2B473F1844FA3EBAE165D350DEF
+:10D2E000637DE56FD8BCD6D58516C296D83D877AC2
+:10D2F000F6CDA2F9860CB7BAEF387F1EF0EBAF9AE5
+:10D30000C7B707A2E9E996271D867CD97922E07B79
+:10D3100014DB62EB87F7B29C6C5F87F7E7C23AAC2D
+:10D32000DB1EBB9E3BDB85F5AEFED15C1FCBEF3E2B
+:10D3300090C5D6637D3D17539E1FC84A60E50DB169
+:10D34000FB5F95E954E59D980BEBB23E0EBC2B328A
+:10D3500013118EB73B56AF83FDFB2B51F655452677
+:10D360008343CA64E72BAFF6BED09106F4B09313A3
+:10D37000E11CD95B6EFF14A0BF0DED97D0CF4F57C6
+:10D38000EB3BD2034F66D0F4EEF3CF9D82FA0375E8
+:10D39000C4CF49F1F5C0E10C4D0F68F7A2357DD837
+:10D3A00063077D04FF0BFBAB1404252919D65D79B7
+:10D3B00008CFC5F43A44760FCA3F536F577F43A551
+:10D3C000E7AB476F6EBDEFA937DA4567C1FEF3449F
+:10D3D000ECBFAB82B4B7948E7B95D25B2B9D0FF9DB
+:10D3E000E0895BF5FA46E38778E3DEA81D78F5E887
+:10D3F000CDD98113CDF36719BE1BB203DFAF7E62B7
+:10D400005FA904F3ECB93596BCD5E4F22F55B918F1
+:10D410004D2F5AFA4B55CE5F098D0FD7670E19E184
+:10D4200059D7648447E38F2BA13607BCAB45479F90
+:10D4300006EBACD9A5A46AE60DBD17120FCE5FAB03
+:10D4400074F2AB66338F72EF2887F1E95F353F9155
+:10D45000182B6E153DFFAB264A0F401F4FF3287F58
+:10D460000AEB379C4C9322F4F87F543CFCA974A837
+:10D47000C9574D9F44B7FFAF4A779A3E9B88EE3C11
+:10D4800071E28F07326C88BF0DBC28C0FED1810CC1
+:10D4900089E589B8C80BF6EB6C76EE9D4AA85C78F6
+:10D4A00057E26AAF03EF8329DDD650215DC72BBD5C
+:10D4B000B74DD1AFE3EC4CB61EEB1BDC3B61CBFAB6
+:10D4C0008AC9BF381DD6AF86BDEF71EE7CF2A2745B
+:10D4D000DAFE892113BC9045D66DDB6086F9CDCC90
+:10D4E000647A64FDF657D1EEBB59BA5EDF64D4E7C7
+:10D4F0005FCE10553DC1ECF03BA95D00E708E3E1CC
+:10D50000A13093E1E19EFAE3284FEFDDCEA13CBDCF
+:10D510002593E1E35E3E847299B433FB99D8283EAB
+:10D52000A85CBA0493007CFC35C7CE77F30141FFB9
+:10D53000FEC6FD7B562F043B309A3FBEA7E2E92B87
+:10D5400099EA3B84E9C13B33D13F0C70D0DF5B9F4C
+:10D5500067F0AEDFBE05CF275FCC50ED6B953F2F58
+:10D56000C23ACD8CCC2F459DDF05C7C836D0179465
+:10D570006F4C78BEE47533C275F5ABDF6C827AE22E
+:10D580005417DEF7423B96E6FB9627845A75F13A2C
+:10D59000CDAEC9F7337EA8E565835DD890E933D871
+:10D5A000E9D1F6C6FFE80396F6A878FA4BE983C3FB
+:10D5B000AA5DF0A7EA834754FE8FD60BA37CBC93E9
+:10D5C000F1F1A5F3FFBE10F2D17CFCADCC8FA69794
+:10D5D000A2F9F74AEFDD48D7CA1222161AFCA39C1B
+:10D5E00010F8C1A3F41FF1933838DFF644EF4FA6CB
+:10D5F000419CEBD2DED5EB628DFF4416B3B33626E9
+:10D600004A267C1FF2754667D17222BADD285FC4B4
+:10D61000892FD6D6CC41FFF05CCD6DB970EF2DDAF5
+:10D620003F18539F935357817FDCAAFAC7FBACF591
+:10D63000BD31E0F566317CE6178C9C027CBFDFC013
+:10D64000E17D62F8D3DBE9779FF7FF60581A0BEFB3
+:10D65000685EF34FB6B3F1A2C779575DB751FF4487
+:10D66000A1FE09C5F370AD3911CEB16AFEC9B0F2A1
+:10D67000E7F54FDE2423FF300BD6F9686CB81CEABF
+:10D68000FCAF08C17D73281C579798FD0AF08B8961
+:10D69000B6D3F925D1EDFEA8CEE7CDED37298FCE53
+:10D6A0001BE3C9F1F86D14AE3F91DFFA84911CE0E1
+:10D6B000FB378F7C70F15198CF1107BE3F16DDCF3D
+:10D6C000D7B2CCAA7FE0403ED0F4EF80D0B3F905CA
+:10D6D000DAEECD3B32FD3B888E2F08E50BFAFDC21A
+:10D6E0001F295FF851BE211FF7F53AEB63F9298333
+:10D6F000AA3F141DB7117BBFD1047EB14CFC167D2F
+:10D70000DCE90D75DD7FA1CAA5A22CA63FEFAA5DBD
+:10D710002140BCE8FED1781141E7429C9A7D04FC8F
+:10D72000CBD7D47B02CAC68498F1DE992A5E278AB9
+:10D730001FACA933FAF577D51AE5C73BA1FC513DDB
+:10D740005238CE7E9446BFF1C6BB51FDD117BAB94F
+:10D75000FD8089E6F7D9AC1BD31FAB48D33C8C7353
+:10D76000D0F581B496344D7B81C2F3CEA19509608A
+:10D7700047FD82906AB4E33FF8EC34BD5D1254F18A
+:10D78000FC7EED67EF00727943689A164BFF44C741
+:10D79000697E118A7D2EE32E55AEBEA1DDA7B82B82
+:10D7A000763C7F8B3AEE1B75E3F34D74DCA67699DD
+:10D7B00071DE4A16B387DEA86B7304995FCDC6FD90
+:10D7C0001B362EE82DBD5DAA64FD79F4E330C4EF6D
+:10D7D000619CED84403CA54F50A6EACF5DA5643323
+:10D7E0003CE4178DBF0FA5EDA768F5A2EDAC9F67D0
+:10D7F0004A867BB3B5CB8C70B569F62D11310E72AC
+:10D8000015F4A527A22FEFB4FA1F043A202E09CB56
+:10D810004FA878BFBBFEDF2C307F2A3F3BF01EDBDA
+:10D82000599308F2B3EC7CC8A2C7CB851BF4AB2E8E
+:10D83000A8F6C2447234BF6804E5DBFB2117DE8F13
+:10D8400078F30BBFB3C4EAB7F67A96E11CF1FA405D
+:10D85000ECB88A98258C8B6731CB88BFF5D773F1EC
+:10D860005C703CFBFF10C8AF99608F1EE9D0DBFFF6
+:10D870004F6549AAFDAFCA339ED9FDF1E2AF432AF5
+:10D880009D4D147FD5F4B3562F7AFDB5345A5F0EF3
+:10D89000ABFC1C5DEF52D68DD1DDA81D1387EEE2E7
+:10D8A0008DABF91F5ADC37BF98B68FB12F33661C8A
+:10D8B000B55EF4386F46ADCF183F224EDC2E299B63
+:10D8C000E13718276E9794CDE2766709D38B4AC863
+:10D8D000897AECCAD17BF781B9F7C0E2CF9D06F512
+:10D8E000D6A8C66BEAEA5F3D057EAAE65744ECF18E
+:10D8F000601BEC935DDDC1A1BD113D4EB45DDE0842
+:10D90000EF15822055E307456619E3D4E43176BE6E
+:10D91000DFD3BC1AED4B2D3EDD27047624D0EFB7C4
+:10D920006CFFB76DA05F353FFE2D8BFF411667661C
+:10D93000F6EE855E17DE73DD3AEAFFF931DE38CAAE
+:10D94000FF6AFC71A2F518953771D6632279132FFF
+:10D950002EA2A5A3FB2C8254F80A9C4BE512FDBD18
+:10D9600034AD11080F78A859CEA19F5923C84B3167
+:10D97000DEFCAAC90479DF72DF6E3807BFB2DA2293
+:10D98000DBA5C8FE4BE96B0D85AF807F41270C7E80
+:10D99000ECC02FA57F82FBC1AF2FB64BB03F727694
+:10D9A0009E34E8A1F9B3777022D83D558BEF374FFD
+:10D9B00083F15671F80E8DB399A8E7B56F5D5E5986
+:10D9C00040C8370044DDBD8F1A6D9F4659BB0FEE2E
+:10D9D000CD4E4D1D30B9284ABF7B78ED3E1B85AB3F
+:10D9E000A335E085FB78F76597EC83FB786969F2EE
+:10D9F000D0026A471DCC9EB11CF2037FA3F557BA33
+:10DA00000FEEDFBD680AFA385AFE83EC65CB79D891
+:10DA10008F98A48DBF1ECBEF5AF2E0B16DB4FFB763
+:10DA20000F6F590E67D7CBEAB4F11F595EC953FA8D
+:10DA30009FABE51F4B84BCC74922FB4CB309B144E3
+:10DA4000EEF7E179F781D1FB7C2DCBE1FCF8EBE53A
+:10DA50004D95708FB3ECCB1DFB8AA710326B59B973
+:10DA600028D3FCDC9C2F2F77C2FE31A1F448F3723F
+:10DA7000CE57107E8FD9A4F61FDA2767033CCA540D
+:10DA800028E79467F655BBE13EC2F06920CB879B3F
+:10DA90007B6C69867B098A0CA68970A23C9C85E018
+:10DAA000A8FBDAD9E169ECBE9D9A2F62718AD1BCDC
+:10DAB00097E50776C4BE7FF2610E935F038ED8E5CB
+:10DAC0003D2ADF6BFBAF49E789FC6C0CFEFF3CC4D1
+:10DAD000FD6746F8E914C4433CF8E45C532BECC3FF
+:10DAE000DA189CF1F671F7A9E314B426E13B45CBB3
+:10DAF0009A9CF8AECE243F9337948BF89520FFCDB7
+:10DB0000268433D5CCE17B26690E123C4ED3D41447
+:10DB1000F6BEC9328A6A787764E1A4C0513CDF9BC3
+:10DB20009E51D206E7EB5A7FCE831DA6B51F0BA7E9
+:10DB3000B805E04C35D7946C29D6E1AF98C14DD7E4
+:10DB40005D6D277F13DE7B19189A9A0F767565B67F
+:10DB50006488CB940DD558E05CEAE51C554E48AC82
+:10DB60007D6A25932B235BD4F72A6CFE12435C5FFE
+:10DB70009D7F65E7B22F41BD86210B817388DB8EC7
+:10DB800097E33BFDF1F8BF01CEBBEBF476031FC674
+:10DB900073E60D70DE7D06F4F75301CE37423FE0A9
+:10DBA0001FC0BD0EB09B52DB62AFB716576EB8EE0A
+:10DBB00026CA0CFD7786AF48FF1E2C9F685E91FE3B
+:10DBC0008CF7F8C6F6A7DEE7D3F0CEAB781762C3C2
+:10DBD000F9AA469714DF261D3DAD52E98B4A3F7CDA
+:10DBE000D7F7C2F2E25EFD7B0584EC60E73A78BAD3
+:10DBF0008E604F0E39F07DE0329EC9C7B2A16451EC
+:10DC0000E1C6D285B6AE03C94DF83ED1C80A2EE6AC
+:10DC1000EF0F9CD7E052EDA7F4BAA079830E3E8DAA
+:10DC2000FE23FD0F7D41E38F75C8B77B197C606FC4
+:10DC3000C03CFCE169FA73201AFCB753D981E7496B
+:10DC4000DB54FCDFE10AF57211BC8DC57FD604EB15
+:10DC5000998BE5654327059867431C3EFD650E3BA0
+:10DC600027927E3E9C08E703966633FD35D03FC37E
+:10DC70007E1BF0C53213E124366FB033CB34F94A42
+:10DC8000DEFB590595AFE9A3792A5F2558875179BD
+:10DC90001BB6D922F57F9AF3DEF276AA3F3C567680
+:10DCA0001F8CDA8F36A2BB8768CD61F1DBD9C1D872
+:10DCB000FBD6C3390906B9F5547325799BCE6F6538
+:10DCC00036D3E7B387157C2749E3EB68B95498C38B
+:10DCD000D6D197C3ECF18F5F2E7113C8A515AA5C3E
+:10DCE00062E5C4136880F234937A2F4164EBBEF18D
+:10DCF00047330A210EB7D56B96E09EC34ACE9FF3F9
+:10DD00002D3A4EAD4DEA489022F4514B6C920BF0F7
+:10DD10004D47807BAF35CBEC98873FB03BFEBD874E
+:10DD200063F447A4A4DA71EC5A0D9EAD5E01C7DB23
+:10DD3000B8AB3029A887930F3C8BF13DA70AA72DDC
+:10DD40004A5FF1C67C5A5AB8D164D695BB98FEEAB0
+:10DD5000F6CAE539605FAAE79BA2EDA27BB23983E0
+:10DD60001CD6ECA2DF79199F50FE45FF319DFA8F3A
+:10DD700004EE7BF407F03C183C605488F775D9FB3F
+:10DD8000C66F1D2773C14FD2FAB92BA7D8D06FDD4C
+:10DD90006ABA489FA4CC69AB942FEBE4D919F57DFE
+:10DDA0007A4A0F33815F57E710633B73201BEE9570
+:10DDB0009374AB1FE4CD29217018D757246E58DF18
+:10DDC00085E62D87912ECCC4DD86E7A48E60FBEA24
+:10DDD000BA9152B4533F308741EFFC3C3703E339EB
+:10DDE000A94E46B7A7EC4DD88E275232CA1155EE30
+:10DDF000FD3C770ABE7FA1C9CFC87D16AD1F567EF8
+:10DE00008A5B910DEFC49E4A9D5CD2C619ED1DB090
+:10DE10007F22F6D2F3FB6EA7FC38ABBA3F4C61A66B
+:10DE200052E5A5E58FD2FA5B7298FE3BE50B0CC07C
+:10DE3000B8A7DC4404F8670F079F85FC62AF13DFC7
+:10DE400071D3D623CDC47E1F264DFDFD15E01348AA
+:10DE5000C55CC66F8773D93ABEA3E6D31263FF9E33
+:10DE6000CC7FA8F57AE0FE1FADD75D1EFBDEE81E75
+:10DE7000958F1B6D3DD570955E77CF13EF2DF38495
+:10DE8000DA55B4CADE1CD60FD56788AFCACE3AFCC5
+:10DE90003DB1F78756E1BBAEA3BFF301EF54D17597
+:10DEA0000F9395FB01EFC22FCC787EB3C3C2E8522B
+:10DEB000700745B88794E28CEDEF7E578527C5CC77
+:10DEC000DEEBD6EE2F58D4FBFCC7547B2CD15B8BFA
+:10DED000721DDE58937CF02EDB08DECFD5D631FAEA
+:10DEE0003CAE45BDC77FF3F643491CFBA1D4603F60
+:10DEF00068E346DB1117E13D6E5DBC7B9DF7DC42BC
+:10DF0000A2ABFF6932DC01FD7D7A5B96212E11CF39
+:10DF1000FEF8912A6FC15E5062C22518BE5FA47ED2
+:10DF2000A0A21FFF0A1B3F32AE9328BA71F7E6C8C2
+:10DF30003FCEC1F8CD5C11DFB1B0133C0F5BA6BE84
+:10DF40005F47F513BE5748F55235C86FCD2F02BE57
+:10DF5000179380AFCBCFE6A4EAF4A4DA2E5A1EDDE5
+:10DF6000A1DA0177A8FA26E9BC66373A248E8BE855
+:10DF70009DB17A8B53EDE868F918AD178C7635A50D
+:10DF80005B456F078CE11715AF374F1F93E2D0C782
+:10DF90002D7F11FBB26C6ED03C0DE4663547601FDF
+:10DFA00064569551DF3B7299DFE1C8751ACEE1D610
+:10DFB000D419EB25423DE0AB5CE70DF9297A7DC42D
+:10DFC0009941EEB1FE36ABF4E07BF7AC00EF372EB3
+:10DFD000C965F650499E9C9A4BD3237FA8EC83DFFA
+:10DFE000A11869E549AF07DAC97DC31E98974D04AA
+:10DFF0003FB57C6D55D1115A6EF9A905DF9D2427D7
+:10E0000062FBF7AE664EBE8FF273BE2AE71A3C6C17
+:10E010005E0D9EB05040E1C86C60F064F70F72BCBA
+:10E020004EEE65D7B37AC5B91683FEF1439EC2772B
+:10E030006BAE16BF0CB5C2EFA164D7CB3CE8BBCC2E
+:10E040007E8EA8EF6EE27BA9997ED6BFCB1FE2EE53
+:10E050002D8ECCBBCBB4A218F445579AD30FFAE25D
+:10E060007379C1329877C3857018D036EBC2100F20
+:10E0700076DFFE3C79167CD7E62799C54CD81F770A
+:10E080005E60F0F544D13F21BBD575E965F0B9027A
+:10E0900025004F5AA284EF10D1BF7CD0AB69C9AA2A
+:10E0A000DE482341782F88D8683DB0831CB49EFE9B
+:10E0B000DE260994C23E412875DA74D0730B1DFE2A
+:10E0C0009336D0AFD37DD3E15DA1170EC78EA7D70E
+:10E0D000AA7A87C27FA71EFE78FC31FADEBA5ACF31
+:10E0E00012C78FD6E8DE591DDB5EA59A00CBCBD7D1
+:10E0F0007AEE86F934B40BF81B5D1ADEF7E70536C5
+:10E10000E6A6C23A1DE1805F33FBCB91AE32159E8D
+:10E11000805DD1EEC80DC13BB2EDC99F4A07FCC777
+:10E1200083BBA1D92CDFA7E7E77601D7E348D4F971
+:10E1300035CDCF782C97E9A3D37981AD30FEE613A6
+:10E1400007F09CE083472F09E3BDEB73A378E3EA74
+:10E1500099FFD2B086BD9751BE96473ADCD42EE0E7
+:10E16000BBEA0DCF1E0FE37EF17682FBA00DFDC74B
+:10E170004FC33BAD590DF24CFDEF126435B077E360
+:10E18000D212467F1F5400BD9DD9BFA201E95A2477
+:10E1900022413A0AA2DD956D63F6A886DFD34238A4
+:10E1A00017E267A74DC4DF46CBAF59942289E6AF8B
+:10E1B000F91C7E787FE1EF8FBF213D067886B81885
+:10E1C000BC7B9017FC12E0A3BB959D27EF5E48ED4A
+:10E1D0001E5A6FA1936C85FCC2361701FEB8513CE4
+:10E1E000CC8AA28B59DB199FFC283751E55782EF67
+:10E1F000291DCF4D50EDA8601DDAAF741E9D731020
+:10E200002E9C87982B7F15E9564CC671331BC29CF8
+:10E21000FEFE899646E84A7E3637F566E0ECC77D15
+:10E22000C64DAA9C295F7B947B5B47072FE69A919A
+:10E230006E329F3DC2817F48CB5B177AB03EC607E6
+:10E24000339F657ED3265A7EBF41AE6CC0F97439C8
+:10E2500098FD48E5CA4980EB94690BBEEF776A3AAE
+:10E26000C17766EFB8103E8DE25985F794C0D6931A
+:10E27000A77868A5F99FE54A38FE6921781FACFBAD
+:10E28000E94C76BFBBCBB403DF3BD5F83E9A4F7F5A
+:10E2900096CBFCC9CC3547398827789CCC9ED4E0F6
+:10E2A000D3EA95E4559C05FCCEAA1E423C34AEE16F
+:10E2B000D97D0D159E8542A000FCB461B5BF93AB1E
+:10E2C000BF6D3E44E16B2CE6909E9FFCBB57912EA8
+:10E2D0001B7B38F6BB413DAF0AAB74FED5C1EFBD29
+:10E2E0008A7A65E9008B1F340E1CE7EF7581BE3911
+:10E2F00089F4D948E9CF5E0AEBC6ECD86B96702E4C
+:10E30000E8CB68FA745633B90831D742F60E1CEEE2
+:10E31000FF86D6DAD0EED7E4AFA8C209EF08827C38
+:10E32000FD8DCAEF5AFF117FD5EE07FAF6BD3BFD12
+:10E3300024BCEBD6E8E7FC701EF93F46F50993D7FD
+:10E340005222FC7660A4FF68FCE5E631F91A438F9F
+:10E350007C184B8F687AD6F77405BE97ACAD1FAFAB
+:10E36000E27D54BFE7B1FB578979BC0A8FEC853851
+:10E37000B644F9B9BB14DEF50B144B809F54A71FAC
+:10E38000E23B7FEF7E5DDAA0C3D76981F23BCD9F90
+:10E39000CE77203C942F92F274EBD750CC7E67EA74
+:10E3A000C9EFAE40BC36C0DA51BC3604EFBB0FF14A
+:10E3B000EC25E231902F4126BF1AD6DCC5DE05D709
+:10E3C000F4DF731CE2BF4171E13BD74BFB57207D6B
+:10E3D000128FDD5FC8A15CC375D6F84CCCD5F61D95
+:10E3E000D8BB43D4AF6F857889E6D727D605940488
+:10E3F000692C9FA6A87EFD4CD5AFB7CCB6FD59FDC4
+:10E40000FA4DCD3F41FFE721EF8F30D5F884FA8DEB
+:10E41000067EBA2D8FD92D929A56E431BEDC54DA9D
+:10E420008FF4BFE97213F28FAB9AC911D705A3FC21
+:10E43000D3E260D4836374E8EC5F04FB110BBFC2CA
+:10E44000892007E2C1FD19AEE967705E851C67E7A8
+:10E4500028167CF0F344FD3BA435798CBEAFF599CA
+:10E460004918F0CD3709E3D9BFF1FACB0957CDF9F7
+:10E4700027BA7EFFD29784E782AE3DBBF2F3905776
+:10E480008E26E139929C702DD2C535CF1C3FD081AC
+:10E49000A78DE1E95A7F25D2CFBBE99209DE096B4E
+:10E4A000ED7F623EFC5E74BD0AD7BBDF3537031ECD
+:10E4B000767CED3BF3E15DC94D212E05EE9B5DEBD6
+:10E4C000FBCA1F41EFD51F7D18CF7DB57DF37FA11E
+:10E4D000DD6D0A1D61DFFB9244A877F59903F30116
+:10E4E000BF6DFD6D58FEEE3347307FF26BDF311F9D
+:10E4F0002A8DD0F1BBDF3DF2C3DF433E9088F77237
+:10E500001A824F3E0E79529BC8EE5D055F11F4BF33
+:10E51000DF75F0F820F2A146174BFB39F5DD30012D
+:10E52000CF7968F4FB56457119F01DA550BF793EAF
+:10E53000CD7727D4C78A23EE51E7DB00B408E3AEDA
+:10E54000E142C0075D82D287F25CECCF0579EE2C08
+:10E550000E0BF02EE9EABAE3F3D9CF10B662F94A0E
+:10E560001B3B2F368DF20BBC1F457B3BFA21C4F7BA
+:10E57000BA1E5C07FD1D3613D19C118177B320A113
+:10E580007FB4B986F3530E231CD9762A15F6C79AA1
+:10E59000897AAE8BD5EBA2EEA52D19F510B1D3B4C7
+:10E5A0006C5BEC38E893792E953E19BF660EACC8CB
+:10E5B00006F9413C567FA12FD25FCEF9A66E78DED8
+:10E5C0003FB37E6811CC6349D18619300F0FC4FB6D
+:10E5D00040BF282EECBF11E293949FBEAACAC73455
+:10E5E0003180EF8CD8E4402AFC269B640DE0396E24
+:10E5F000697DC0D20A72861FC95D858AF09861FF65
+:10E60000F0A025983113FAEB52F5D351063F6D8FE8
+:10E61000FD4995B207DAD3FEB13F5B9DCCE36FBEF7
+:10E62000D9D83AFCEB0F6E3F668C9787C6F45FEA49
+:10E6300002FDA2ACC17593049CEFBB5015F1ADDC9B
+:10E64000AA8F6347C77B409EC17EEFE9BCF2C1BC85
+:10E65000D448AAC581A2F1CC4BB49CF65321C998E9
+:10E6600092BE1BBB77A6C9EDCD7B54BDFBE22594C2
+:10E670003B9B833CD3BBC1CBA877FFA545266F53FB
+:10E68000C3F2E0F39790BEEF3DC1F4EEE61325022E
+:10E69000D0B3F61EF2E68A6BA87F153341BADE2CA2
+:10E6A000F49FF642FFDDC44D2D7BB279FEF02D20A4
+:10E6B000FF7EFDBC7D0DB43F653221BD9DEAFDC4EA
+:10E6C00091364E0F1FF303B8FA10F2E366D52E28E9
+:10E6D0005F7BDF01F0C71AEBD9EF116C1E50F98B8D
+:10E6E000FA6380DFCD275E45FAD1EC5EDFD3354893
+:10E6F0006F6E4A6FF8BB095543081FFDF317D2D45C
+:10E700005DC5DEC55D52545206F47672F50F778210
+:10E71000DEDE5C4544E8FF608EFC3CBEFFFB3C87D0
+:10E72000EF511EB4F454C03DC9830B2511F8637337
+:10E73000B076543FE1F9EA60ED00F28F679D1FEC7F
+:10E7400087EED620DAD5DD194EB40B0E3EDF8AFAFD
+:10E7500073B3E4F0C3EF992C3DC16DC5F68A8B30DD
+:10E76000F839B4F397866EC3735B1A3E96560DE77D
+:10E770003279C1E0FEB565E8D330EF5F7FCF0A6F35
+:10E780007E8FD2DFFF05D640AE560080000000002D
+:10E790001F8B080000000000000BDD7D0B7854D5B6
+:10E7A000B5F03A73CE3C1226939327E1E9C90308EA
+:10E7B00098841308EF872704102BB583F2B2220E3A
+:10E7C000C823424846C48AD77E37830331526F6FCD
+:10E7D000AC2FEAA576A06AD12B106DAC51030DA821
+:10E7E00014ABB5D1528A16BDA3222F918CE083DEE3
+:10E7F000D2F2AFB5F639C9CC640262EDFFF9FFE998
+:10E800005737FBECF7DAEBBDD7DE9336D9BFF18E85
+:10E8100032802BD561BAAC03A42B6DBE3B3201D242
+:10E8200000F435986FB07B9D3A9647FE430A6DCE53
+:10E83000C5EFD3C0081501E4DF23192137408A262C
+:10E840000164516A335307C008C0BF0691AA811200
+:10E850006F31C027B5067C3800F84FCB0658CEFF85
+:10E860000058B1A8D5A1617F554F89FE329D46E978
+:10E870002D989EA3BFCB305F013778B13C4B966E8D
+:10E8800098C1A98D53ABDC4A8799F3C87D64E1BD7B
+:10E890005370FEDFA9043D0987E85D88DF310F7EF4
+:10E8A000080DC0F9F7AEF4F6D5A83C73A92E633E67
+:10E8B0002B03BE4FE591350ED82C75ED7724AD6B4B
+:10E8C00004D5F39649582FAB678A1EA4A1E4725B66
+:10E8D00012B52B95F4CD1AE5AF7E14084E59BD74D0
+:10E8E000EA072064C2C15B66C37A47B353F4F5F408
+:10E8F0003DF407E56A84C7244DB5CA4BA99DE601DE
+:10E90000585FDAD96E4ABE97FB9BD233490FE23C7F
+:10E91000A737044A204FC0C1EBEE8443684DF2DCB8
+:10E9200050143CC6131CB07D6830CC6D2C22F87B93
+:10E93000ABA89F6C9B9EB11E3715DC81926B526811
+:10E940009C20C36B00CD03D329B83E3FF59BEF5D00
+:10E95000C5F0C84AD113C163CF25021EBBE76C9333
+:10E960003760BDEA2229E4C4F9DDFFE28C525A6720
+:10E97000F54CB70E98AFF6290B695C08B8E031CCBE
+:10E98000836FD1BD53305F5DE9D5D76BBCEE455485
+:10E99000DE3733495F8FE50F3E2F1994AF0EB84332
+:10E9A0004998BFB259E04375F3D3CA8D98F620BC9D
+:10E9B0007353BB40C98CE2CEF900ACE1F9544F3A35
+:10E9C000D1FF656C1F9041972762DE111EA8E3FA04
+:10E9D000AB27860712BC4E3E9F3497DABF62B30561
+:10E9E000689C57365FBA292875EDE7A4DDDB44EB58
+:10E9F0003F89EB0F60F96F9FFF7388E8612DD28329
+:10EA00009C837BB4462BA7F2F55340A57DB1F66BF2
+:10EA10008F23504878B5272F99F183E6E945381FB1
+:10EA2000A77FF602B8F5126F8D8670AEB6B5D629FF
+:10EA3000D46E4B06C018CCBF70F7409FBB2B9CB167
+:10EA40003DEF8B4B01C65F57A847281885572E17F7
+:10EA5000D2DA304E036E4C7BAC16F089EFE74ECD28
+:10EA6000CDFDAC7085F7E0CE41CDEA065736E29198
+:10EA70002F59E3EF49F680D107E7E3682E6FED8366
+:10EA8000E5D9E9F81FDAB7CD3D42B46FD9D9E07BBB
+:10EA90002641BFAB4C3CB3F6A5211D182FB33DA2B8
+:10EAA000FECF4DBAF98949975BCC348A2E62F1DEEC
+:10EAB000EDCB253E919D0CBEC604E359ED717E5C05
+:10EAC0006ECD0B5CD84F26B5D36C8CDF717417CA32
+:10EAD0002A1E4674372559DFED227A1A963B2C08F8
+:10EAE0009DE320247267A474C5035A07D10FAD8B30
+:10EAF000E8ACBB7A0DBB047F8AC7CB674C3AA9222E
+:10EB00005CC7796F93901E13EEB3E8A7DE966B7B1C
+:10EB100010E7FBA3FD32F3D9F87A56BAAB16A0750D
+:10EB20001040DEC66B53BDC5DDD7DB66D6FB71ADCD
+:10EB30008B53B7AEAD51B0FFA12D5AA90C349E3600
+:10EB400089C60BE078B4CF2913E15319E1E319DD4D
+:10EB50005078672EE179E35C5AD750256C2B25BE9F
+:10EB6000EBB5416BA1E0DFE7F0FF3DE72643ABAB40
+:10EB700033DFCB971E93EF53D93BA67E3F7F5E4C8E
+:10EB8000F925AB87C494E70686C5E4F3EBC7C6D482
+:10EB90001FD03029263F68C37762EA0F0E5D1D93B0
+:10EBA000BF74CBF763EA17372E8C299FF48FFCDDF7
+:10EBB0003F253CA7F527E073561AD17279FF8636B8
+:10EBC000C7AE3F7574ECFA158800D1FBA4E4BFEA28
+:10EBD00089E8D94A5341F92C6CB5233EE0D26C0F39
+:10EBE000E23CCAFF2C87D627988785CF567E922293
+:10EBF000C78C6BF1890BE1579EEFFCF8F263C217EB
+:10EC0000E779E6FD0F39215DAAB9820F28E0E5F525
+:10EC1000A74E9C7BDEF5DBE3D70F1AE3BD87D69FBB
+:10EC200000EFE3D79F3A3A761FACF5E7F90637874E
+:10EC3000B19FCFE74A2C5FF651D198AEFDBD1BB70F
+:10EC4000CED9AB52599F01EF3509EB77CEE34E9EFB
+:10EC5000C7F54EF02782C374130E95B982DE2F4498
+:10EC60009FEF9BF3F81FA24F4CDD6B73991E619FC2
+:10EC70001C1A805D2DAC9776F544BC48F7B9592F26
+:10EC80005BA8B44269949CBFDFA4EF074DFADE5045
+:10EC9000AB723F0FD7E670BAB156E3EF8FD416725E
+:10ECA0001AAAD5F9FBE6DAD19C3E8AFA18A58FD7C5
+:10ECB0004EE3744BAD97EB3D593B97D3A76A7DFC70
+:10ECC000DDDA9FEBCDFD016F06CBB3F8F5CC5F9598
+:10ECD000182F412EE2F6F391CEE4F3F0B52EEDE5D8
+:10ECE00079A9E7C3A3D50773B7BF1C8507D7E5A6E6
+:10ECF000641EEE81FF1805A3CEC9176EFF65ADB681
+:10ED0000FD65FB85E9C2C21738FBE18044F5AEA77B
+:10ED100031C722BFC9DDDC1070770F9F4E3C8AC31C
+:10ED2000572FE22B7E2D21D9DE8BCAC3BDA3C7F995
+:10ED300093B9CF567EE64C81AFF1FDDE6FE2DF2C5A
+:10ED4000C24F2C9F1D47AFA77385FC3C9D2BF4F44D
+:10ED5000FDDDF08B7B726DA6FC14FB3E6B9FE04BE0
+:10ED600077F6983FC197605C294F8BA1CFD9336369
+:10ED7000F771BF5DF0B7FD7F92436B12ECFF85DA50
+:10ED80005BEB896FF72773BD9FFE7F466FFBAF4D2F
+:10ED9000617D7EBFDDD72F2B6A7FF65FDB636EA2BE
+:10EDA0007DFFDF5CBBD8AF421548BE433A18A407CD
+:10EDB000E192020ED2E5A0403D4C7482C610D145CE
+:10EDC000F778A9C0618B9E64826712EBE39FCF4CFA
+:10EDD000E1FD079F6A4054FFA0A8AC976EFB2EEAA6
+:10EDE0000A349E82E3A11E0ABAAD73FFF2E8BFC9DE
+:10EDF0009DFC5AEE9EDE2E8407161F994D7CE43C46
+:10EE0000F2BA6BBB8BE32387888F5CFACDF3118B4F
+:10EE10008EE1EC8D03BC295DCB67111FE90DF0D3AA
+:10EE2000DCB7998F7C6D3859746BEA13F1FCA4DB65
+:10EE300076CD9917907F263F57FCF561C48BDBE4B4
+:10EE40009486F5D8E42EC5FF73CA07020A3C86A94A
+:10EE500073F5E9DE878673B7850AD71BC2F69D5323
+:10EE6000F1FF32CCF6A053A57A0FF5F8F7ED945FD9
+:10EE70008D1CD389E99749FD4380B640699EE03FE8
+:10EE8000B2EB4CEF4351F3B3ABD0273A5FDAEAEA87
+:10EE900073286ADF86EF5563F223DA7262EA8F3AEB
+:10EEA000A0C5948F0917C6948F3BAAC7E427444690
+:10EEB000C7D4BFEC8C11932F872B62EA57B866C476
+:10EEC000E4A7A8D7C6D4BF3C67414CF915DA4DB1C9
+:10EED000FD157887E7E1BA173ADCF5522ADA69B905
+:10EEE0004619E59393ABFD0BC84E5AE3516122D509
+:10EEF0000E85086E750E97BA1EF9D40792D11F10B1
+:10EF00004FEFB3A1D59D8FF5E530507AD0A697523B
+:10EF10009A676CF1119D6E2F4CD6681F920702B450
+:10EF2000919C52F424407EE2E811F95D01EDCB6F33
+:10EF30006CF01826DB5554F4A97E736688ECDFACC0
+:10EF400064DF15348FF5B606CF1ADA671B781FCB4E
+:10EF500064BCFAC968CC1F7E41B1119E6D6FB1DDF2
+:10EF60003316F39F61F7329637B59DF8C995981F10
+:10EF7000DA66D7A9F65090D94E5CAEC03D4A7AF712
+:10EF800078F6F10F843D15FFFD677982DF6755083C
+:10EF90003B33BEFC8E3C21DF3E76242E5F6EB6AF47
+:10EFA000B86BFA43C4D7EC6D7620BFC5AA2CA32753
+:10EFB0009C4F5F3D930FA1E15179C50BAA9BBE0FFA
+:10EFC000E4EF1577CD83B05BF4437EAC5549464FF3
+:10EFD000F23B7C3C29F13C6E31E7613FD3A39B7E41
+:10EFE0003DFCFDE3BCF3AFD37E2609421989DABBB1
+:10EFF000F97B563071FB7BCCF13F4E4F5C5EDFD12D
+:10F000007F2F086444B7137CA7739CBE5C6E3F934C
+:10F01000068184EBC8E4EF9063E410DEEC423A270B
+:10F020007E519E96ED0024F1F91079C540F8CF206D
+:10F030009300F1145C7A29F12950EC91B04517281E
+:10F040003F1680F201D90B3644C67338B51B56DB28
+:10F050003F0847D1D10C23360F543F4ADE7C427D16
+:10F06000E37A928714A612BE9F022D554D805F56FB
+:10F070003ACF257B95A8F51CEC464F6A33E178B072
+:10F080005762383E6FF2B191F320A1BED696E711D8
+:10F090007659A1DEF37C7283E0EBCB88EE377E1FDE
+:10F0A00032B9FCABC219F182E57AE4BBEE10FB2960
+:10F0B000BF71785BF8DD27062F3EC98F9F777F2EC3
+:10F0C0002FE8EB7D2B8FE58A3690E4629349BF4DA4
+:10F0D0008AD163989BF8185426827F9F7C534F8D6A
+:10F0E0005B771318390BC8AFA1D875E267C932F83E
+:10F0F0009F4E00FFF875A79AF3C6F6735BA93D789B
+:10F1000074C1E7C0EBCA463D9FFE854B280FBC6922
+:10F11000A7FEE7F93DFA7A54813ECF13FAF40208CC
+:10F12000DB890F77819F3BD34E7EDB78387A419B1A
+:10F130002FE55F189EE905C6E7041F9B4BCDDE8ACD
+:10F14000EB9C1FF000F9696E98079E629C8FEFBBE5
+:10F15000E96F185877E155434AD6527AE9F83A9957
+:10F160005B4F66BD4F0AF491CF5DFAD5F5BE3A8F7D
+:10F17000AF90E8E390A42D61384808079237BD8F1F
+:10F180000F5C1005C715FDCA7F9F9F45E7036064AC
+:10F1900090BF788793FD56B001580FADD9397813D9
+:10F1A000C9852FF27DAF51BD51934DFFAD11197837
+:10F1B00075CAC5C30BFFEC44271782976CD2FB417D
+:10F1C0004F62BC19972FF6EBABD24B66BE8043045F
+:10F1D000E1B0B9EC9BA717845F0CFF782D5FF05F5F
+:10F1E0002BB5E0366A5AAC7FF735731DAFE57B3837
+:10F1F000FD22DFCB706EEFF7E9E12492FF0E5C7F1A
+:10F2000002BCF7764337DDADBF3B7AF9A6F8F2C111
+:10F21000E4C4F35CFC2D99E71B344FE2F32589E746
+:10F22000F96F17894FB83F4B5CF9DFFC3CBFC8371B
+:10F23000DEC8A779A6279EE74F2F129EC8EC96B48A
+:10F2400062BDD9C807A9DE373D5F082C984272E835
+:10F250001A9FF0FF1723C7253E845379F4DC70D240
+:10F260006FF5751B88EFACF4E80195F9C81BF982BE
+:10F270000F8281F399394D627F52FB884F97288422
+:10F28000EFD9D09A46FC6AA793FDD9F1EB0F99EB21
+:10F29000473A799CE004D32303899F1C1C98984F1C
+:10F2A0003C1E5FBF3EC2F2697D7962FD749B49AF2F
+:10F2B0002B5C0DD3B26DD1E72BB84099B86CC0E888
+:10F2C00043F2B64C5D4BFCC4817289E0EAE833A49A
+:10F2D00027ED07E6BD12F981735E3F207918DE271E
+:10F2E0003AE097D739CEF1DABD6A81BD7B7EBE5C4C
+:10F2F0007E66A43FC17AB66ABE5DF95176E3F22D0F
+:10F30000AFAA05D1FE7108DB800547C4E6E5F341ED
+:10F31000D36FD0132ECA6F509C29E865453F2FCB81
+:10F3200007921B643FD7BD30A6943617F50F20FB1C
+:10F33000209292CCF222D87B6CA11605CF0FF32D30
+:10F34000FD53EE46AF74C47C7FB7D685266567FE55
+:10F35000FAA3FBA6903E3F1FC2EBA8FEFC553DE87A
+:10F3600008B2639D1DFD9D9162F4DBCEFE15FE5E2D
+:10F37000EE72B7CA433175FF2EE17E6CD58CA304C3
+:10F38000CFB5FD8C63B4CE78F805EE1A9FC67E0427
+:10F3900082DF655DF7BDBB7DFEAB669CA6FE5EE8C9
+:10F3A000A75A7E1D9DCFE392ADF361453DECEA8403
+:10F3B000F757DD9764D3BF88FAC4399AB701557EF1
+:10F3C0009ACF3C8BBEE3F41C2814FE803A4FDBBA84
+:10F3D0005D517478832D9225E476781D3999FE6706
+:10F3E0004712F38FF61DBFEDE7E3F3344BEFE8214F
+:10F3F0009FEBF1D5E767F917ECC989F569EB1C6359
+:10F40000B7BDA880F5123AE71D8D79495B44F6AA8D
+:10F41000A2821EC4F5955F8ED884FD4D92FBB68402
+:10F42000711D9FC3D9E40998FE2788F5AF7AF3A32D
+:10F4300074F2634E52ECC7A3F953BC1F684041AC51
+:10F440003FF914CC4B6D25B88C4F67B86C6F99940D
+:10F450004AFD943C3FB927A5BB6AEB55C5DEE90FD1
+:10F460008A9F7F793776E9B002A177BE9E6C0C2B1C
+:10F47000C0B4BC9BF58F32EB85938D5105599DFD32
+:10F4800051FD44F1106D832C3FAE80EB358105AC0E
+:10F490006FD95CC857897FA2FE2AABE4272CB03312
+:10F4A000BD1BA0A9D9EC3714FB8F7C5DC1FC0433D4
+:10F4B0002FD5BF1DA4761B6FF1F03938F83420F931
+:10F4C0008080E173813AC9CF7E0717C57D60BA5E3F
+:10F4D000D237902E26DB2219822E4222AE017C0AE0
+:10F4E000E57F2B85831427B0D6F5EF3F273FB81172
+:10F4F00054206922E615603F63E0600A9FCBF1CC9F
+:10F50000701E4E6B5E663EC5CCB7CF9A3A6D00A6B4
+:10F51000B7253FE2213C0D4BC847B19F2F93FFBD5C
+:10F5200095E9C69FACDB7B937FE93DCE4B2B937572
+:10F530002987FC4F9E42D2535743B2EEC4710C77D9
+:10F540007180C67568C0FEF86468E475B8DD9F0414
+:10F5500008282AA812DB4FC9BE65056CAF009F932F
+:10F560001F7E2F6533AD3F493DD57A077ECA0083A4
+:10F57000EB65C4C9C72CF72A89E337BC4A9C5CF405
+:10F580004904FF9E73E3BFC7CA4B171C54899F48A9
+:10F59000ADDE9C73C89FDA086E659D706B53845D09
+:10F5A00067C12D30C9FF4B826BE04EA71ACCECDE51
+:10F5B000DF86001A45FA789BBA642BD547C3096CDD
+:10F5C000D45F8E585FA0D229F641F16DA5F6EFD831
+:10F5D0007354B27B2C3C7B68A0C9AFBBF1773C5025
+:10F5E00020F4A3EAF4C3D524E70007B5F50738995A
+:10F5F000727424F10D9497F5242F93EC06C3DB92DB
+:10F600009B2B9AD600D15575F30220BEF28EE41BD7
+:10F61000F032DB23C076D99C6981576C1AF9B26647
+:10F62000AE7363FA49411EE3D7FE57A6BEC26C48CB
+:10F63000761753BBD2CBBC53B270DC6031E8776233
+:10F64000BD60926FEBB3B4AE3765FD318DE2212A18
+:10F65000E0C3E12632E1F74DB333D86F9A5911A9CF
+:10F66000A37881C8DDA0527C4F17FA388BEB1B09B9
+:10F67000F00B1E0BFB59A4B612FEF4427C93D4CEC1
+:10F68000F247A93C5FE42FC37C8DD852C86F29FF95
+:10F69000DE0882479B0C141655D322D968FCFC99CE
+:10F6A000C359AF29A0F2CCE8F2B4E54F61BE60EED9
+:10F6B000049DC849B3F97E762B95BF01BC0E30F985
+:10F6C000F7A838FA1DD749375C5EDA91F757D07C36
+:10F6D0005FB919D88EAD31E56D0CBDD162B1CC18D2
+:10F6E00049F8D7D10F503F15667E9CA2723F7DFD31
+:10F6F00060F205EFC607F89CC0A6937FB24E6A6021
+:10F70000F840C0CFFA1EC5CD10BDF49FB76BB79DB2
+:10F7100006CB1474A7EF157457065E99E03552BDF9
+:10F720003B48E3CF9997CB7C66CC5160B830E5611C
+:10F730007E429AC4FB943F209FF165BC4BAF97116A
+:10F740008F64B9343F09C79B3B4FE2F38959735D1E
+:10F750002109FF390BE983E3A1145FEE6CC4F7398B
+:10F760003E499CFB627E5E943F1EB5613E379BED39
+:10F7700004FFD309F0397F80C077AB7DCD5A478C29
+:10F780007FE792016EE1E71830F59302E6BF22AE03
+:10F79000252BD91B117CA381F9D4611BEADFA4FFBF
+:10F7A00082C1FAF63526BD5BFC6296710BDBC1B3F4
+:10F7B000BCB17AF43BB4274407D74AACE7CE997B77
+:10F7C0007E3DFB5C8164C6DDF455599E99DF35D0E2
+:10F7D000D89EBE9AF49C12FC380DF59028FD7EDE72
+:10F7E0006D67D3B87ECFC7579CBB0451A152F09729
+:10F7F0001A8427F1CBF26B15A697EAB50E8EFFAAF5
+:10F80000695E63CF267CFE21E8025FDFAFEB83F306
+:10F81000EC53658C90B528BF4D554822BACE269E34
+:10F82000C3F08F38C82F37DBA157D1BA66A7831A28
+:10F830004843BCBCF68A8DD4FF5A17A832CADBDE17
+:10F840002D6F8608AF9095EB849388391CD7D657D7
+:10F85000EDC1E70BF5B6611CB755EF49D1A3E3A4A1
+:10F86000D6AFE9C43B8AD7D29C304C35F737919D4F
+:10F87000346480E0570F4AC0F22270AD8BE19C9552
+:10F880002FE295B2527547308DF88D66D5E338BBBF
+:10F8900007EDBE5EC3310DA15A29F647B48BA7FB15
+:10F8A000AC0CB39F1E9A1444629CD9525A6623B87A
+:10F8B000B953748A4FB4FAAD4836ECC4B72A8648B7
+:10F8C00023820CCF4DCA22D24F9362F9BEDD2EF6B1
+:10F8D00005DE157C3F5E0EA21C60BE4F7EFB6019EC
+:10F8E000CBAF8A01592C0FB89FD58A4B75EAD0450A
+:10F8F0009E657A2185FC5CC31064A4AFB7E5786788
+:10F9000050FC5EE07585FD6A6573F5EB1647EDEB1F
+:10F91000E60E391099CFF1503FD4FB503CD4DAF2C7
+:10F92000CE3CC53D56428383F0BD324E3E2E73BF62
+:10F93000CC7AE4B247ED9DF80B1427AAE713FFA891
+:10F940007AAA8B3F88F954273F8BB32F417D89D604
+:10F950003302F931F121A3204566FF32CC13721432
+:10F960001E97C82F267B56D793DC6B97521AE4B2AA
+:10F970004E3E39C2DCAFBB14EF4B141F1B407DE978
+:10F980003115BACA01F0B3FE3211E526E9D152CBE6
+:10F990001C99C6DDB814FBA6F37C255C41F9DB9607
+:10F9A0008A735208DCCCE760E3024E95E8FFCBE4B3
+:10F9B000FE6BCD71FD7664D6C7D41F727F80FB428B
+:10F9C0007A8B44FC10CB7B4FC3A64807E35A8E705A
+:10F9D0007F1B33045DC4EB312FDBDC219B8DF86E84
+:10F9E00080E54E128472087E4681E0B36507049F6D
+:10F9F0007D2E801AB44CAAACFF9AE9B9AC0772F913
+:10FA0000D80870FCCC0EF0559BFACE5D034650B47E
+:10FA1000A85FF071535FB0F4B82971FB78B9FB7E31
+:10FA200085F8D6E5395DF64BA6FEA781C4FAE21546
+:10FA3000DAF9F99661F12588E54BB97096F70FEE82
+:10FA4000DE732BF90982717A50F022F5A05EB9BEFF
+:10FA50005FD0FAE2F5A1EEE2299F1A7071F194A845
+:10FA600041CC27F935D6B2B3E2F0A77ACFF1F9F756
+:10FA70004027DE75E07360D375B40E94E72AD97D14
+:10FA8000D26F1E62BA5E8BF5E4F104CD83C1FFC272
+:10FA90007CAB0DFC14AF003EF534E1A92577911342
+:10FAA000319ED42D1678374A11F9BEA8C8125E06C9
+:10FAB00047C7EBEBBE5CF2471B65C51C1F6BC9E378
+:10FAC000E13683F16404E81954CFC2939161518EF9
+:10FAD000F8F11AF19371D3105FF228CE76541FD249
+:10FAE000BBCA4163FC288F936B15EE990AD17985C7
+:10FAF0002B7EFF0D3E779C6CE2C714F5EBE1C7252A
+:10FB0000841F96DC423DF9AE38FBE2AE38FBE22BB7
+:10FB1000E0C7918BC18FC845E247BBFD87EF05CA9F
+:10FB2000D89EF5CBFDBBE287D472DB927B88DE8367
+:10FB30002940FBFE74925AE1C679D6548AB8F3E1A3
+:10FB4000BF2F08523E7B452EEB854FA7E92F71B999
+:10FB50005F9497B519720AE6F3576139E69FCEF5BF
+:10FB60005650BE66359663FD11FB7C41CA17FC50AA
+:10FB70009497DEE97F2985E47C40B47FE1589DECD1
+:10FB8000C1F2509DD9BEBCA182F235F5A2FDC803D9
+:10FB9000A120E507DF23C6B7F4CECB4CFEF9B47441
+:10FBA000EAA5DBA93FE49F9B917F8E3B61946EC3E6
+:10FBB000FC22D56623BC5D1C09D8091F0EDBAA46B2
+:10FBC00012FEC0425F0EE19993EC56B9937FD9C8FB
+:10FBD000A983ED262A76D6FB5E95FC0AD59B4624A2
+:10FBE000417276B4EE22FE4EF1C89B51DE1499F2BA
+:10FBF000C88ADFA57B0433A2F6AB68A090F356BD9C
+:10FC0000EC748117F0B0C00B2BBEB8F52190C8DFA3
+:10FC1000426B633F449778633FCBEF50BFE2618410
+:10FC2000B797539C31965F3E56C419979E3B3D351E
+:10FC3000915D347CA0B0E78F9AF722ACEF95A15C80
+:10FC40001BD1CFD3843CBD099EDA1F495F7A9AC687
+:10FC50001ACB200DC068DA47912F7FBCEF7DF57D70
+:10FC60000196DAFC0AE111F497749AFF556DFEC90A
+:10FC7000BC9E2A80EFF54AB00E53DE2F093A368B30
+:10FC80003811C17F6699FB764C9DF7CAED6C3F7BBE
+:10FC9000743B8E3369FC00A6FB9973258BEEBF3352
+:10FCA00090F4603AC1607FB68FE3DD6F8290830687
+:10FCB000B9298EEE97BB3F7B8FE4D2F22DB174BD94
+:10FCC000025A1DC2DF1C79E46DECBF72438A4AF20E
+:10FCD0006745636CBDCA0DBF3F209574E50395165B
+:10FCE0001F08C5F2015438041F7868089F7FADCC07
+:10FCF00091B54319E4FFF0B3BC4F0221EFEF52F48A
+:10FD000030D35F8B53D851A67E7E9B2CF4F32470A6
+:10FD100069EE42E2C336335E55E4ADF1212ECEE505
+:10FD200054C3CDCC6FAC78180420CBFB5381CBD51A
+:10FD3000683F5B079F8FA3F7D2969EAD74DFC0F23A
+:10FD4000B3A07EC0F6152C424E378EF910EF9BB44F
+:10FD50000CFF3F86D6E5E0753DD4A33FF3F7D548C9
+:10FD600010CE52B28B95E256EA7388A02717D111B4
+:10FD7000F1F769B1F65612083D7E789BF0E38CE806
+:10FD800094FB75B4BF4ED05D42EE3700D157B7F645
+:10FD90008A7B55427B852514F63F7B9AE0EB17B2B0
+:10FDA00057BAB3473AF63309F5364C67FA92B6D3E9
+:10FDB000BA2F3B9B9A92289E6A66B9EC25BB6CA62B
+:10FDC000DDC84A4FA0E73F60EAD91DF57D6EEE4FD2
+:10FDD000F1656CA7F825ECB795F87FDBEB8E8471A5
+:10FDE000C98AD9BF6237D444FD5F454EA9287FBB7D
+:10FDF000E2CBE67EBF017DE579DA977879E4D81D1C
+:10FE0000774E098181D171054F0F12FC6E4281F14D
+:10FE10009B81744E94D49FF99D568AF6541FCE73DD
+:10FE20007F076FBE9CE3243E03E38271126BA3FC49
+:10FE3000E707D3129F8BBC61F2D7148A7DC3F47697
+:10FE4000CDF8038D7FD421CE5D8E269BA9479C5B88
+:10FE5000BDD3515FF0C788C5276DA2FC687AEC79E5
+:10FE60008D55EF94D9EE50ADCBBB36CAFFAA3DE419
+:10FE7000F4939CCECA37EF71AC02B69FDB9F4FDB89
+:10FE800014BDAF670796A70CA2F8A27CC3D18BE084
+:10FE9000F8BC907FD54AD841FBFBF025BEA334EFD8
+:10FEA0006A0D8C67A81F2DECB8A698EC06111FD21E
+:10FEB0006E1776607B9248AD799D1D382365109D45
+:10FEC000CBDE1C66BED8919F1166BE7776A097C721
+:10FED0006D9F65959BF9FF10790D549DE65BEE32A1
+:10FEE000ED8742752DFB5D51EF23BF4DFCF901C03D
+:10FEF00078A11F9BF19E46DFBFF3395E777E7E9B24
+:10FF0000ABED95FFC2EFF34D7FB0AFF9D357EED015
+:10FF1000187F0ED3B80B4249C071DFFFA45FBFBD8D
+:10FF20005F1BAF677D79A4FFC3651C2FC07EB5152D
+:10FF30002DBF65BEBEC2A2FBA658BAEF65C2F14294
+:10FF4000E76AF1E72DDF009D0D1C9440EFFB35C9FA
+:10FF50006BC4AF29F274E66BA79A24F68768D05673
+:10FF600047705E29897D59F9EA8D150ECA2F0695CD
+:10FF7000F97C533C3FF305494F585E0F2CEF4A2163
+:10FF80003F95E05DB357261F02DFB7D1A2F824DD0D
+:10FF9000B7D1A2EC62BA6F139DA7FB36D1F5E9BECB
+:10FFA0004D7439DDB7892EA7FB36D179BA6F135D51
+:10FFB0009FEEDB44E7E9BE4D747DBA6F139DA7FB4E
+:10FFC00036D1F58F80FFC1F112C175E206826BD385
+:10FFD0001AA74A70C5ED7AAB289BC519E31FDDCB84
+:10FFE00089EE67B967AA6305C2614F8E0CD268BA01
+:10FFF00077B32CA6DFE57215FB0950ED6039E2C737
+:020000021000EC
+:10000000FF313CE522B6933F6F962003F175E986F8
+:1000100038FDA1E5DE3AD2B76F0AC57E5F0E517E8C
+:10002000F7DCAEE7404B0699F1C0BDA137E1F31410
+:10003000D9ADD33E9FDA27EB4E305D00B4CF5B8560
+:100040003FB214063D349EF7D10E218D8E4744F900
+:10005000A98D722890DB793E746AEFAF0EFBB0DE9B
+:10006000D25EB24A74E7CC89DDEF242D76BF7B14D3
+:10007000C6EE778A1EBBDFA9A363F73B1ECE694697
+:10008000ECFE833C9DE1BCBC0F9A77387EC6B45829
+:100090007CB0E03B1AFF27F05563F82E41F83E2C68
+:1000A000D1B9DA3D7BFA685DE15CDD7CAF83F4D7E2
+:1000B0008B85F37D7170FE1CC657B819B830D335E7
+:1000C000B2535F2ADBEBE72081636ADF0AF35EAF9E
+:1000D00038DF31E18AFA0BDB0B51E750F5B2CCFA8D
+:1000E000CC26A267233385F980BEA107EFD73097CE
+:1000F000E86F31F8983F2D8ED36B96BAEF77905E0C
+:1001000013BF4E9A0DF95D2A5B845E13BFDE2EFE8F
+:10011000A842B5B58FE0DB8D0FEBB4CC168B4FFB4F
+:10012000C88F91096D0ED263BAE38333728C5F93EB
+:10013000DC402E06040F610AF05F427DB2A6A35890
+:10014000F8E79D7EE1E787401ACF6314887970A3B2
+:10015000287FFF2825C47E073429D8BF64D963F1DE
+:10016000F084BED2DAB7B05FF92530E1A8CB92AD0A
+:10017000D37F8F56A041FAF5C8CF84FE34DAD51864
+:1001800054B4AEF6F927F9E639B762C67F5EE01CD3
+:1001900092E64F7E8E6BCCF8BB092DA35EA17CC787
+:1001A000B9E4CE57FBD07E8DDFF9FB0C4ADF92B469
+:1001B000C7EEC0F1AF96045EC4DB95C11DE334DA2F
+:1001C000FFCB242FFB2BA682BFAFB047423CAF89A9
+:1001D0002E1FEBB5369761E7F328D37F09109E4AAF
+:1001E0007AFA32DDC1F358AB7E3095FC31CBC1F4E5
+:1001F000C734C7EE5F177B28CE0EAAC2FDA77EE3E9
+:10020000ED9E047814170F102BEF17145AF7CA45F8
+:10021000BC8A06E2FE77A5E947AA746DF4887338B4
+:1002200094737DA18BDDA410E0C7F07985BD90EDBE
+:1002300062B407F8BC5F73248AD7033593CFD56FB8
+:1002400074CF64BE7C637D17BF0EE3F5E2860BAC12
+:10025000CBD413C6D3379CFFE1419A90FBC9D3F7A7
+:100260001A545CD6D63F5A9FAD7188FBB9E0CF884F
+:10027000B9B730B8509C7B97997A53A5CB8453611A
+:10028000A08EF4E30EBDA98BBDF8F5EEC958F12E92
+:1002900008AFA242C6E306CF9ACCCEF31D6B1D9FDA
+:1002A0008C687BBC15E125A74C76117F5CD1CF37DC
+:1002B0008CEAF73B103E4C74036E8DF5F593CDC779
+:1002C000F6CB799DEB423C7B701CADA35956C5BD66
+:1002D000F940DD38ECB7BD54E05DF7F6AF8027CECE
+:1002E000EBB2C2ACAEF3B2E2ECA7C845A9E128BDBF
+:1002F0003DC3845FFB10EF146A57F6C7BE1E9AAF6A
+:100300003DAF714F6FD28B6F157A31EE2BFB41648D
+:100310003B48A4974E91CFDE42F95339A092FD9904
+:10032000D923207B48CF5B00EC2702DDAF13AAC89E
+:10033000FD8AD84ECEBE15ED27ECF7DD5537A6D198
+:10034000FDFEEC944569F96E8A6FC2A90EC0BC64CB
+:10035000F38AFBD9CFBCF76F65543E8FFDD2D73BF4
+:10036000C53973EE0FFEB69CE900B474E7181ACFD6
+:10037000C7EF0B44D2649E5FF9B59F0D27FDAAF726
+:1003800059F730D2CF7AD1392F8274A8491F9755A7
+:100390004486FBDD9D70CACC4F6CBF649BF03898DF
+:1003A0007C72369D8758F7301EEAF1069F879F348E
+:1003B000CF4FF28C69A984E707075AE75AAD59E491
+:1003C000B2AA4E3252E7D03CDF94F97EC567AA91BB
+:1003D0009A86E527C1CBFA63A0CDCEE744ABEEAE5B
+:1003E000E899EEEE3E6E7F4DA1B06FAAE2E2A2AABE
+:1003F0009456079D6755FD9371514D6871273A0FCB
+:10040000B3D65F9DA68032145309BCE7ABF7E23F39
+:10041000E48470DC629677777FE3E7E6FAACFB1959
+:10042000D5743F033FAD7ABEBC279CC70EAD3E33AB
+:100430002EE61E04D96BB4BEEA3313F97BC55D27E3
+:100440001C84DFD40F3D8560DDCFE80ECED985C298
+:10045000DEA8A67B0D19D1DF051D77F69FC9E54FF4
+:100460009A707B72AF6DDAE604F37CBD50D8DD4341
+:10047000B214F6175CDA0AC6A604E35AF5ACF70D17
+:10048000BA9B57D3A4F07C9A37C505271A6FA709E2
+:10049000476BBE4DE9E1255E71CE3A90DE2FE8C88C
+:1004A000AB91FE5747F1D3B3A67FA0E93BE1FEFC39
+:1004B0005EC615C28EED6E9FE7F4F3A5137F18A9F3
+:1004C000B4DEFA4A269B5D407EB49EF35A6D242723
+:1004D0003BF84F37FBDD096739E61E4C57383BB810
+:1004E000BCE3FE19181E299BE410B03EF0D01F4B50
+:1004F0001C0E1CFF980D22C477A6C87DA7BE4079AC
+:10050000B41F882E8FB1ECC07483CCF7998E3D9ABE
+:10051000EF20BB6C49394464E45BC7DEEA5F477196
+:1005200097DA02D424C7A1BAB336F6FCB1128C3DD7
+:1005300029D8EEC603DED456CC2FBA27568E1D7BA3
+:10054000EBC70EB207A4856E3FC515E13CA7BE8080
+:10055000F9C5CD0EBE9FB5E4FEF8FE62F5E06C5322
+:10056000DEC6EBC39F179AFAF048184972E685DA9F
+:1005700066F17E8E791F11F53F23119E587A7028FF
+:1005800079D2DF99EF43A34C7C699C92B8FE92220A
+:10059000B10F2B1F3BEDF068DDD3D971E42705388F
+:1005A000FE895A95D3ACC1866B30F63F60B02F659B
+:1005B00030B697B548FF4FD8CF29CE4111DF385F0D
+:1005C00043F7D448DECE157A8253BEB992F5D13EB8
+:1005D000A006597FF1FBD99F6E43FD248DE2376E53
+:1005E000913DEC6F10EF078DF968511AAD37F3BFED
+:1005F000E73C4D70A53B0E40EFB0941BA5C4DFD780
+:10060000CF70F379FF265B80FBA140ADBB109EA1AC
+:1006100027C7EC26F77941E3BD93C8EE535B76B567
+:1006200092BD526FFB740FC525D44F043DC8D00E48
+:10063000F138352D339EA6F6FD67BA75BA5FBA3E1E
+:10064000D72855A3FAD720F21EE99927AB6CEC37CF
+:100650003DD5FC0B3EAF42FB2E42CAF7A9AA3CF6A1
+:100660009B59713F7CF697C06F7802E51B44DDE72C
+:100670005ED1B4C946FAF8A5B451517155D6BCAA99
+:10068000EE6CCDBE8EE4EE130ACBD1CCDF5CC1F1B3
+:1006900003B98A26113CAF9354A18F9A7AF2B560C0
+:1006A000FD35BC42FAE942D293110F3F94421CAF90
+:1006B00069839667A9FDDC1CA10F82D63882FCD71E
+:1006C000E12AF37DA2E5F634D26FAC7382EEF0A19D
+:1006D0003B3F0FF6B4E41D1CF7A404EC6FAAB14530
+:1006E000FAD3FC8EDB13CBD779834D3E30D01F621B
+:1006F000799E0EEA6334AF025F2ED165B54D5BC9BA
+:100700007EAF7D5E8E0F6997D4F498775ED4865F56
+:1007100093DE5D6353857D73C028A5F398F6194574
+:10072000FCEECB497BB83FF311E47B149775EB13D8
+:100730004D3315845B756FD4BB30BFF9895D3315BC
+:100740007A87272FBCC486F95707FF45940F091FE6
+:10075000A6FC1F9FF848940F0B2FA1FD39F9C4691F
+:100760009127030C11EC6F4FFCEFCC00AEEBB8E916
+:10077000FF043D3C9FE659FDC2205BB47FF1C86099
+:10078000C1378F27897AC773E186AB49FF280CF3FD
+:100790007D18ABDE6B83CDFB0426FEDFF462522BAB
+:1007A000C5095BED202771FF41B3DD4DE67B59485C
+:1007B0007FBFA27A2FE768E9BCCF479147115C9EC3
+:1007C0001FCCE73D370D4EE7FA049FF4A2AEE32DB0
+:1007D00023394F72C01E7BFFADC1DC2F2812FD579D
+:1007E000F756D3683FB2D3859D811B927617BF63BE
+:1007F000B0C9D4ABC4FE64CA6A695065B9339CEC15
+:10080000E697CFF62D65BBB9A29BFB9E83851CBBEB
+:100810002928C689F4D2D4CD7CEF1C0C8A4779B93B
+:10082000396973F47B29274DF81E199C26E0D7B14E
+:100830000F3D251E2768C2A52FC2BBB8137FACF69B
+:10084000175AF7F67FD1BABBEC5399989FB51E8023
+:100850007B051C707E69A8E71F5F63B61B6DCD43E7
+:10086000637AB8E9C5DB3708FEA7A5B3DD0E3F11F3
+:10087000707059E316F1F9E40A530F96036F38C804
+:10088000DE5851DFC6EFAFAD6814EF6D75D29DB184
+:100890002A9ACE32F3C53A33652333C8F488EB6322
+:1008A0007A34CC788358FCE980773C1D77E94F4B4C
+:1008B0008FED4FE3FEBADB87B08917DFD83E041314
+:1008C000C3B383BFC4C1AF831E73CD76458867654C
+:1008D0005DE9F18FDDD171EED71CCFBC77B2E27646
+:1008E000335E558BC5E3154DB9B685459DF5EF6E65
+:1008F000BCD71B1D4FEB6A5A1020F957D352CE714B
+:10090000B52B9EDBFAEB00B65FB6FD010F05531F5A
+:10091000531AB2492FAE7A6C9DC7A0731625E021F9
+:10092000BE792C244F4B747F75D41029461FABA67B
+:100930007F62FFC79FFC5BDDBFE1FCBF9050BF4201
+:10094000785737FDB58EECB73D862B4272FBA81267
+:100950009E4A72F4A6056E3FBD2F58D31CAB4F2D97
+:10096000FBE503D91A077707FAD8589F6AED43EDDC
+:10097000AA1FB5EB64BF57EF93751C066A20524758
+:10098000F38B6F5FD3F8A183E0AAA23ED8775CD740
+:1009900072E4248CF7354D3FFA54F6507AEC1D285A
+:1009A000A1FEA2FC1108F7CA6EF4B2C221B1F7028F
+:1009B0002CF840288BF59BE0130F95BC8FF33AF190
+:1009C000E86B1EA9285A5EDE29CEA91A6FFCF90B26
+:1009D0005AF772F524E907CEAE7A80D62C0925BBEA
+:1009E00045A455F6560FF905AA36D9F5007EAEDABC
+:1009F000FA8BC7E95C05DE76EA74F458B5F5B48382
+:100A0000DE3FAB928C88C47A1678A4919DFBB47CAF
+:100A1000EB47C25FD54B86E9B84FCB7EF5B9A86FDF
+:100A2000402409EB2F7FFA7DF66F55F9DC7E578263
+:100A30007DAA68DCE508BB13EC53E3FB53490F0ABE
+:100A40003EF125EFC3B19D12F4CCEDDABE72D3476F
+:100A50000EA29B13B8211969025E649FD634CA0B9B
+:100A60001CA989F6ADF52AD2FFB09CFD2017DA3F0C
+:100A7000D7101074F1DCD66D640F54BEE3D4A7D345
+:100A8000B8DB6EF100EEFF11C52FF0FD67EBB20D84
+:100A90001CB7D21EC8563915DF2B1FB995F170E966
+:100AA0009BB766B35E07462FDB685E6F2F5AE7E29F
+:100AB0008DB3789D4BC0C77858F933E1CFF85C818E
+:100AC0006989EE1B6F1F22E487136E2E21FAF81C32
+:100AD0007B223FCC11078878DEB7C43B644EB83A1E
+:100AE00035FA9DB93B8708391080D07BF4FE640D40
+:100AF000DAC5C417E4373F9F4AFDACCA55FC4E9592
+:100B0000D71F30E1259D13F11C9A62C59DE6E17E59
+:100B1000BD39A527D9C14E38E5B8BE8CDF69D0C82C
+:100B2000FF1BD58EE17664B33359423BFF4876E232
+:100B30007B84EF99EBC0BFB7200A9F6AB61C617C2B
+:100B400002B4BB527344FE61A243B48B52116E9F38
+:100B5000EDFBD0D19BFC1D99361840F36DFB88F35B
+:100B6000A0676954DFEABFA6D919F32E49CDA31FA8
+:100B7000C5D1B333EEBD133FC3B3065235D2378F61
+:100B80003822535FA471705C8AD75C72BF33E6BDB4
+:100B9000B04E7C71747ECFEDA44FCBBE5A6AD27F2B
+:100BA000FCFAE3F9C19371FC0036667DA5F79FAAB4
+:100BB000ECA1C7093E5548AF01A657417FA8A347FE
+:100BC00006203D7CFCD44BFBBF4F7EBA467BE674CF
+:100BD0001E2D96CF563E83F44BFE348477924E7C86
+:100BE000F64B07E9BD39156807E3BC3F76EB74297E
+:100BF000AD2BDDE2F78474EB063ED7FABFC55F97F5
+:100C000076C35FF7C5C1F373284AA53B0CC79F5C49
+:100C10007E09FB15E2E06BD9BBF17CB37A88C67024
+:100C20008EE79BF8B71FA2E0B8ECBF3F61BCFDA206
+:100C3000973807AB7EF4AF2CBF10AC1127E26D756F
+:100C4000E853CEAF23F9C5F95D33E9BCBAEBBA631B
+:100C5000E1195FBEC1E4471DF7DCEE8400C5DD4548
+:100C600076C8FC0E433BCEA58EF4F3A772F99C70B8
+:100C70009DA9EFB7AB110FE9E7EBD2AC3CDC40EF3D
+:100C8000C1B4074AD400B54F32E30FBC114F5A9498
+:100C90009EF47E8BEC21BD2E1C826989DF050CF24F
+:100CA0003CC2D05DF91A715F4B3EBB2D6CDAF54E3C
+:100CB0001C2FBCE6CB6D746E7E4871F1B9E5A23590
+:100CC000733C7CFFAF25FF3F092F16BF8A70247A43
+:100CD0000A188E5E08E71B0508D0FC08F079B09C66
+:100CE00052B6E745ACB704014CE724F1FE9465E049
+:100CF0004D6DCDEDEA374139E820F9BF14E511FB20
+:100D0000BD37C6962F6BF998F16C591C9EF908CF28
+:100D10007A75C5B3DC4B4DFF4A29949AE7BA6CCF7C
+:100D2000B7EF95F93CFF940B58DFA0735EDC3138C8
+:100D3000D522F3FE9C7A4A0A71BC61204BBCDF8A43
+:100D4000F84E7A968587F1F67D7C7AE2D97747D29C
+:100D50003DB1AA5FFFA5E4BF303DF1EBB707BE4848
+:100D6000F9E7FEDCFF2FD0B57EC5CEBFB21DD3BEE6
+:100D7000D3C9FED0F69DBFED4F72B9FD05A74EF861
+:100D8000DB7EA753C435EC4CE177CCDAFB09BF5DC1
+:100D900070C7972561965B6B791FA75FEAE0FD3E00
+:100DA000D5F2379623A75A9C1AADA366670FF68F24
+:100DB000D5BC901422FF40FB8E2F4746BF77F5CF5E
+:100DC000AEA7DABC4FD39E0273296EA63D4DC4591F
+:100DD000D6BC38E6176BC81E69DAE520FF7FC56F01
+:100DE000FE5E427CA9FD995D0EE25B68973E02883B
+:100DF0001F732EFDE903F65E745F0CD8DE3E7DE9BD
+:100E00003BB3E87DACAE701170684738D0BA102E95
+:100E100095A49775078FEA6F2D3C3E657BA2AA6566
+:100E200014D351275C24437C4F09B9245AFFF31E85
+:100E3000F21BB5E7A1FCD769DD5F9690FE74A17542
+:100E4000FFC7A5E27DEEFFE7D76D838B5AF753DF2F
+:100E5000DA750BFC1F76A926DEA78AA383AE78FE7F
+:100E6000DC0F38BF2D45E7F97E45FA7FFD5BBBFE01
+:100E7000AFBCEF25E4B7BDD87DFFF85BBBEE0BED53
+:100E8000FBABE6BEA7A874BFAE7DC7DFFBF37ABF9E
+:100E9000E2BA938BBEADFCEDFCEBEED08F64AF8B72
+:100EA0009ED8BA075ADB344CD775A3A78C2AB2FC5C
+:100EB00010C21E914D7D631D0C3336915D857A06FF
+:100EC000D901EB3245BE1EF50799EF0F72B00AD477
+:100ED000F7D5C5BBB68A1F54CCDBFF7C23C7B3ACA8
+:100EE000CBFE0EE495D17985F06304D7E8BE5DD8DA
+:100EF0003E9866D3823A3D57B5D2B709CBD5DEB21C
+:100F00004AF6CD3AED6A57F43B168ADB1163A7B86F
+:100F1000E3EC8DE402478C5D9204BB55F2C327E9F4
+:100F20000AC7FF3921AA3DD6CF2A12EFF42743285A
+:100F3000A0BA2F1E4E8BBE3E9C5C7CAF5235E104A6
+:100F40008641EB766A0AEB610AA0FD28D621EC4EB9
+:100F500084A316054730ED50C504B9A20D6338A22D
+:100F600001A14D1A4D70F5331C83BD6495E1DAD9AA
+:100F70001FAF3B7E1FD6699320CFD4C725FD9B872B
+:100F8000F3D822111F100F672BCDF795AF21FD77F6
+:100F9000D51A71CEF5CCEFBEC3F9263BEAC374CFA8
+:100FA00030D5B7A288FC8E5E43223A5D3543BC2F14
+:100FB0005846F7C032C9D41771B899AEBEA0B0BFB9
+:100FC00012ED0CF657AA40F69F3C091AD91FE855B6
+:100FD000E2E27A558E7B0ADE2CE29EA01034F14EBE
+:100FE0004B6CFC4F601214525CC314B9AA81E675B5
+:100FF0000A521A28EED2616FEDCFFEE17E008F918A
+:10100000BFA5FC8B8D549E8B7A3DD07D32A5F53DDE
+:101010008A6FB84D4E058EAB8AE0A728B85D76C6BC
+:10102000054A149CCB212D267FA2DFE126B213F2C4
+:10103000024E9582C72A5CBD62DA9FE87586C70BAF
+:101040003A5D2AD94753D4DC98F6B267EF7B64D770
+:10105000BC916E63BBE0F29CC131EDAFFAE0C4C657
+:101060000526CED23ABEF7AEB8A78AF6D623AF632E
+:10107000BB37EF0720BFF1155A694CBB66D3BF12CF
+:101080009962E7F766AE2C1C13336E737837C3A5ED
+:101090002A0B243A0FAEB2214960BDEFEAE531F5E3
+:1010A000BE37FA8A987E67183362F255ABBF0025C7
+:1010B0000360DCEAB340EF0796B636C6B41FBEB78E
+:1010C00039A6BEE7753485302DDDA705291D75507D
+:1010D000DC231D8EFB41E71BCDE1853AC5EB14D324
+:1010E00005D0323A16F0565018F2C8A3FE9728BD24
+:1010F00050FC3298EFB2269BE7AFEB6DA1C605B965
+:1011000014FFD3F0E35D12C743EE263C1D1D69A812
+:1011100048C5EA63CF34BE446953DBF87A7AC7B373
+:101120000AA08DE5AFDBC6E70253E4961289ED9F76
+:101130001EC39D51E72EDDBDD7F9A3D2F27D4548F0
+:10114000476B738C865DC4F727BD3B5FCEEB5A0FB0
+:101150005425128DE73F2AF51EA6384D2B4E2AB98D
+:101160004216BF4771B98893A9B3E94926F362FDD6
+:10117000409D6AE738FE65C582BF8D6CDBDCE82EDA
+:1011800023BBD3A5D1BE2667C4DEF3BE71B4B8B706
+:10119000F7459179BEA2A859D7931FBC3845B4270B
+:1011A0001F1F8D37DDC6FA94E780BEC78EF9FB0A94
+:1011B000F7A9C4CE9AA67F10E0F74D0FB44D903436
+:1011C000809EF794DAC80E87BD76FE7D99A6C2C9C7
+:1011D000A70BA87CFA5B1CC3B86BC22F0B49BEAD32
+:1011E0001C3CE4BCEF8C7ACE48A045C5412C2BD6E4
+:1011F000783E1E25CCEF1279CE285CEE99A7DBFA5B
+:10120000478DB77282D0FF560E4EDE4A78EB3960BA
+:1012100088B8A842B73680E9239CC37C4209E75CC2
+:101220009F22E2ABB4F3BCF37F7CCB88349263198A
+:10123000E57A1AF94133B6CA1DF7CE683D3FA6FFDD
+:10124000D0C13AACDF3F19E7B58562D744792BF2BC
+:101250002458EFB0CA9125613E43B2CAD7CF9E5CF5
+:10126000C4EF31C6D41F9AD751DF70E574F6AF15BD
+:10127000AFDFBFB688E037CA467125EB7F67E777F7
+:1012800006709DAC4FAC447A06E97CF0EC710178B5
+:101290007AB8FC90A4C5BD9FDB5A4CF982BEBE4112
+:1012A000C558FF92B3A9FC0EC067F5492CFF2E3933
+:1012B000FB3D7EAFB3C961F4BF9DFD37491C6F365E
+:1012C000E3E68F37AC26BABEEA7821C52858EF5737
+:1012D000D6A85F303FB0E2EC3AE187F88B78FF6345
+:1012E0005B679EF883A7139E06BDCFB53E0ABEF48A
+:1012F0009B2F334C78FA8A37CE5E8BFD6B8BA6E53D
+:10130000105D9E0637C7F59D561F9F4DF33DBDC529
+:10131000CE41B44D26BF0C149AEF11648673E85E7B
+:101320007EF19B368E473A88F860203EE4B7BE993E
+:101330005E4CED3295748A6F383DFECFFC6EC2E98B
+:101340001F0207172F0B3B185E4D998B2ACA19FFF6
+:10135000B574F23F58F06D34FB79B8D4B8B298FD4B
+:101360005CE67D1163EC45BD3FB96BC2977C2EB046
+:101370003617F5FC340A393E5347EF4BAECCB5B3C4
+:101380005C5A99F6C5D44CC2F7725784DE81A859CD
+:10139000FD19C317BBC98DBE07A69C91418B8ADF7F
+:1013A000D2868AFD571483F75F39E3E0F2AAD5A706
+:1013B000996F5BED4F98E7ABF42E23DD17AAFA8700
+:1013C000CCF746911FD64BC328DDED5819C54FA069
+:1013D000F1D30E3E3F14F7EABEE96F25939F728664
+:1013E000A4CEA2F9B56C3B339BE2056624A9B328D1
+:1013F000DEA06EDBFBB329BE60463F7516C517DC69
+:10140000573C790E97F7521FB0A1FC7AB964BEC859
+:10141000E7AA7FA2FC535BEF98C3F553C4BEDFB6C7
+:1014200075CE9C00F36337D3C1A9FA1E21E779E892
+:1014300060E9EA1721FA3DDB2EE5E6EF49C15CC120
+:10144000F73EB9BB0FBFDB09056D1C2FB6BE58F8C0
+:10145000FB3BCF5741A5F3D5CC7C30C8DF9CF95C72
+:1014600092F85DA2436DFD097E4736DEF203F2A7D6
+:10147000AE9080DFD1AF026D24D1D5425BF83D4AFA
+:101480005F1CEEBBB798F5A9368E775DBA7A27CF89
+:10149000EF53DD8C5B562345DEAFF54E04F69FF02F
+:1014A0009D88D838E30F6CDA40EA5731E1B2506ECC
+:1014B0009BEF10F37A94E6B5227D17C7392B6A5B50
+:1014C000B64FE851856C3FE524F37BD175BDDF292C
+:1014D00049F43B088DB528EF91E49EA96DE674F5BB
+:1014E00050607CEBA9841D3AF6537D40C89D916DF8
+:1014F0001F38A2E319779BF04D357FEF2A3E1E7708
+:1015000037C9A5A8B88315BD5BFB927E68ED6BE774
+:10151000BEB4F635F70568BE99192F3D45EF9D50CD
+:101520009CEB0FE93CE3B9A456F25B778F27D63EDC
+:10153000887937250BBE11793689F5A6F8751C34E4
+:10154000E76DAD2762CADFEED61131E5EBBF6A1D4C
+:101550001193BFC7AFC7A26FEBBB45DF5DDB8BF954
+:101560005F3CDE897B6D17C23B8BFF5483AF50DC41
+:101570009716FCC682B7354F0B6E4DDDC4E32AAB20
+:101580009F8F598FD236898C1E482D11EF5F298D80
+:101590005700ED87B2BA85EB75B71E39E5333EC704
+:1015A00059A6819FF4DEF875554123B7EBBAAE0812
+:1015B000F3E3159AE0C75DE3F823CC9FABD13E235C
+:1015C0007DDC5A77079FC6F5137D4F4086C37C9319
+:1015D000EE124A645FF862F4E372BA31117D6EE58F
+:1015E000BA39263F45BD3DA6FEE5396B62CAAFD08C
+:1015F000EE8E29BFB2F0DE98FC77F59FC6E9F79B27
+:10160000E2F4FB2762CAC787DB58FF7EA3761AC7BE
+:10161000A74F3C1A613DBCB556E5FCEEDA1C4E5FA7
+:10162000AED598FEF7D41672BAB756E7EFBFAB1D2A
+:10163000CDE9EBB506A76DB55E4EE3F946595BB84B
+:101640008CFCFBA33353F93C6AE350DFF525140708
+:10165000B92F5244F837F640E34B240AF2439FBEB9
+:1016600047F54EAB0E8E475CBB6BCC1F6EC17CC684
+:10167000EB322469E7D38B6430A2F0C7333D0C749E
+:10168000FEED01F13E567CFD8525424F9E0B61F13A
+:101690009EC06A3E0187B92EF5152393C54684EC9A
+:1016A000F6B9E0673DD4B65ABC5333177428237B90
+:1016B000D607FE7B381E29F67D01AF3163DDAFB062
+:1016C0007C36DD3BC5F6DF7737F2BDF267F6A64F15
+:1016D0002EC5EFD77A25FE9D8F033BEFBAD5C5F611
+:1016E000AF75FFF41DDBC5E8130B4B047DB54B7ADA
+:1016F0001BCD379026DE2F8A6F37CA5CE755C108AD
+:10170000EB1F11D43F28DECCA2CB19EA2173FD9A3E
+:101710002D750CD1C71ABEDF50D5A6E94184F798C4
+:1017200043822E46205DD0BE8D3D2AE86024D20142
+:10173000CB41D33EB4E800EDA997A8FDA983A03B17
+:10174000B17DDDC41FC9647F8DF92C14A4F4B2B33C
+:10175000915DE7B07C5C9BF8DDA40BD993965EDAD3
+:10176000523B97F16867AD8FD3D6DA4A133FFD9CA1
+:101770007FB97635E7F7D40638DD5B5B6FE2670348
+:1017800097BF5EBB81F36FD4864C3CDDC2DF3592E0
+:1017900067089FBB4B4C39ED2A37ED0A917A8D359E
+:1017A00076BEE78F9F889FCCA5B9127E544A21E26E
+:1017B000DF75E9013BE5EB92690F68D601AE7F9DCD
+:1017C0001B5A490E54E5BC28F4B0383C29CFBC86DE
+:1017D000F164A619C77A20BDEE5607E2C389C6FB9D
+:1017E000ECB1EF8D5E1C5E2C73AFE57B7DF17CF17F
+:1017F000267A8F42EECA0F0174BDAC4CDCEFA238E2
+:10180000BDAFCAEF555B9B795F4CDC7FA9EEEBE681
+:1018100038DB7F9D9C514D39030BA87E87FD9D7C55
+:10182000703EBD8FD7052E71F6F7E141627F2DFB2B
+:101830001BF54CF64BB58764B6BF2A731B3C6C7F17
+:101840008F8E78683F6FDA2103EB8B8A38EF5D4A21
+:101850001D6914D7D3BA7F1CCB99557B882F2D33A4
+:10186000CF7BE3CF6DABE9BC574A04EF30C7D52F30
+:1018700037CF7BE3D75D3DFE089FF7565FE05EE91B
+:101880007B25B1BFE7137F7FB73B7CA17882E8F768
+:101890005C4F9EAD653BEDC8B63B1E0AF4FDD7ED2F
+:1018A000DFADA5DECF4A441C35DF9BB3F6B3CEFCDB
+:1018B0005DCEBA492EBEC7D03E42E5F76FDA25F1BC
+:1018C000FE4EFB5F415FA3D1FB3AEACB24172ED338
+:1018D0001DCC574787C57B01E3E95E6282F702268C
+:1018E0001C0A0553A8DDC100FBA3C6ECF305E9DE25
+:1018F000EDA8D70D99C8ABF465AF4C7860C9274BFC
+:101900005E75D295796F8E6232F2BF3AFD698B4671
+:10191000E7907ED761B7BAA7F23B45A75B81A349A1
+:101920002DBFD8F083864CF712461CF20549DED64F
+:101930009976E6A813013915BF4FF8CCCF76D018A9
+:10194000B453E552718FDA8882AFE5D7B2F89CC5FF
+:10195000D7AC7B7BAAC3B785FCCFF04212BFFF1286
+:101960003FEF41436DD67BD6838612DF33EFE94DDF
+:1019700091CFEE3A4776419B8817B8E46CFBE3645D
+:10198000F7AC7AB607DF53BB907D50A39E4EA89F5D
+:101990005A698D4D9CA30CABD08693BD497A2BD947
+:1019A000A1965D1A5FBFAC74D2D8A15934AFF16D66
+:1019B00006E1B76A3B2F7ED7ACFEF4BC76A1357E3C
+:1019C000CD8E11EAC228BFD5EAA19219C7F2F5DE81
+:1019D000A19E10991B23C7BEED7A1FD26119E11792
+:1019E000D98624A7BE4F3B80EBB80E5A595FB9DEAB
+:1019F000FC1D8B1B001CD1F7646F0483F9C39F741B
+:101A00005F0DE1CD6288CCA77C8D14A97A1141F8D5
+:101A1000C9C4716AAED6555E5FAC7C4E36EFC1C6A6
+:101A2000C3FD4E136F2DFEDFEDFEC4F1FFF65295A0
+:101A3000EF41B73F3BCE46E738EDBF97F9FD54ACD9
+:101A4000C87C25384CDC3B1D3ECF7C8704F9CA009E
+:101A5000BD2B5F393D7ECE64F61FD1C106C59F2ADE
+:101A60007AE1F551F7CD82E6EFBA6CC194E22553E5
+:101A7000E78595E8F3B39F9AF32FBF7632903D74D4
+:101A8000952AECCE292EC84C225E78F674D12C64AF
+:101A90001057913E3B9CDF617F98E0DCF10E08F12E
+:101AA000A34B70DFDE17E77C7093C4FED2E626916D
+:101AB0002F5E9CC6EBFAAAFB883DF728C1F52F6E76
+:101AC0005286117D0F4D8FE4115D168F793B5DC2FB
+:101AD000799598F7B170DAF510F5FB56EF9AEBF8B7
+:101AE0007CA8B18DE63734BD6DFD7DA45F3E6B03F0
+:101AF000F21B1E1973FB128892CB9ED249BFA27AA9
+:101B0000DB25F39DBA1DE2F70CB04576B47FEB4FB1
+:101B10007AC5F354AFD5F433C0AAE7F91EFF0C55CC
+:101B2000EC014CCE327F4F32D23FD1EF0B59E75907
+:101B3000430996C2FFC8EF8A6D37FD936F0EFD60B3
+:101B40000EF917A1359247F3389224EE517B4A7D66
+:101B5000BF233E3394FCBCB48E9F09FFC091343F39
+:101B6000DF23791BF9339D1FFFA5D6C5E9BB681F8D
+:101B700051FA3F681F51FA3EDA47947E88F611A564
+:101B80008BCF60A7B87F3374E36DE6AFDDACA37B8A
+:101B9000FE1230F5FBC4BFD3F49609FF92A643773B
+:101BA000F6203C6896393EBAF85985F5D3932DA3B3
+:101BB000627E9714E9F530ADAFA4F98F3FA17BD6D3
+:101BC000254D8A2A69742FFB7436C71FC6CD8FE056
+:101BD00040E70D911D0EF17B4AE67CB7A7B5ADA796
+:101BE000F6DB9FCDA319D2398EC0C31DCE84BF377B
+:101BF0006CC5DB3D3154E85FDF7346CAA2CF1FE3FB
+:101C0000E3D3D80F3C86F0B9E00F344E60AF0C033D
+:101C1000182F63FD1BFD74710FC14A8B7738384E46
+:101C200079FB8EFD575F89FDFD1F8FB61B3100804C
+:101C3000000000001F8B080000000000000BCD7D9D
+:101C40000B7854D5B5F09A39F34A32934CC2000957
+:101C5000123809AF00018664121212E024048A8A45
+:101C60007482D482A28EB462541E23D29ADED23FF2
+:101C700027244012830605CA558401C1C7FDFCAE66
+:101C8000D102175BF44E50A9F6B73422E2A354C731
+:101C900047552C4A8A62EBAD2DFF5A6B9F939933BF
+:101CA0004C0222FC97F0E9CE3E7B9FFD58EFC73EE9
+:101CB0003BB3265E5E24C900A7E9670A80CBDB1729
+:101CC000A008604CE9D70FDCEFC1F2599BDB0400A0
+:101CD000F360DB3437F6BBCED1F1A21BEBD7BBDF11
+:101CE0009B968EF51B334D07A8BC49CE999E812546
+:101CF0004088DFFF515EC5810CACCDF456DB024E4F
+:101D0000800A9000F2807F4EE37F531D29008E6889
+:101D10007D9ABB8FA1FEBDCCCB0CFD2F978718DA27
+:101D2000AFCC1B6D68D7E79DE92D34F41B97D19597
+:101D30001B74D23EBEBAA71CF70326080FA37DED85
+:101D4000FEF2EDDBB19C35719E8FF67F0CDAAE1999
+:101D50008D1BFDA4A479E3FDF4B245B165F503B88C
+:101D6000857EC7F6E3103E5286ED926BF9813BF11A
+:101D7000BDDB322590BC00359BADEF4762D6B10488
+:101D8000FC6961EC77DB0EE37380882DEC03B83DD2
+:101D9000E00CB62000173D81ED0E433B8FBB78AFC2
+:101DA000CD4DED4BC0126DCF01A83D9AF3E40B3140
+:101DB000E38DCBE8BCEF7E1C6FDC9E39EE065CDF6A
+:101DC00093A55F0F90719FE55E97E723040D4C800C
+:101DD00009A711E42039CD80FD4EBD2485245CD7B0
+:101DE00034E99BD4483E3EAF423C67E17B26F90F85
+:101DF00065D8AEBE2CC14E1CE76F75F2932F5869A3
+:101E00007CB8D19F1FA50B80950C5FBD7CAB0E7F6E
+:101E10001D01F0C73A07977FAA7373F96E5D269785
+:101E2000EFD5C95C7E5097C7E5AC431068C7F1FE9B
+:101E3000FCF7F1007D681C15A06FB41C67F39A07CE
+:101E4000E03ABA7E2F85B6E37EBF289F9006B4CED7
+:101E50006F70FE620D0F4802D5448CA5F8DF8FB776
+:101E6000BD98E5E3E7AA0BA75AF27709141C77B9E6
+:101E7000D724C65DD4F1629627DA0ECBDF33F48720
+:101E800015A603867A638EB1DE5A7120F67D1D0E8B
+:101E9000F1E52D9BEFB0055C58AE372921E799EDB0
+:101EA000FA7AA6ED4F524C389E659F3D64C7FD2DD2
+:101EB000712BA0607F0B80D29E7FE67B00F50CE744
+:101EC000791204DB138C5B47E312BDEF4F02E93C50
+:101ED000C67D0B6983D6A3FE973DB413DF7B2B4DE4
+:101EE000017FCC3C2DDAF89FA5B7FDE22BECF7D9AA
+:101EF00033404FB00E73693D63777D6C3663392E86
+:101F000059D0C95877C49C81E5899A7F6C3CE261BD
+:101F100032F59B26637B6ED71107A2FCBEF6AB366B
+:101F200039106F6F9BCD00034020BE04FBE31854B3
+:101F30007FD07BD5DC46FCFDCAFD4961F379ECE737
+:101F400041E445A6A34AC1EF3710DD88791440511A
+:101F5000B37415E8F32A241F68FF547FADDDFFE654
+:101F60007AA233E8DA48F2E13840B885D7AFA4C6A0
+:101F7000F2FFD2677FC2FCB9280BF99E04E066C16C
+:101F8000BF0EFC773A97F83534DD89EBBD358CFC14
+:101F90000F179FFF9FF13AA37C3E22219F1FBA1289
+:101FA000EB4B9F91BC766C3EB96F98E0278DEF7537
+:101FB0003ED7E1B87493C47CA9D73FDF27CD08256D
+:101FC00080F7368D2E86285DB369BE65CF5AA00591
+:101FD000D7B76CD288FEB1E3C7BFB7B44902396640
+:101FE000FC279FB3D710BFC8D0D5AF1AF967DCB3B1
+:101FF000A7322AF24559CFF868D3E44DD720FF180D
+:1020000094D726FF9F7E8EF301E27127C2A7327319
+:102010006E36CD3FDB094ACB7806CB1C07CA89ABAD
+:102020000588E0EA92EBB201E1B919D12521DDCDB5
+:1020300051AA5FBF0EF1F80373E02A92F3C7BC43C5
+:1020400078FC6B5CCBAD606672CD36E17873E7D817
+:102050000B693FB31A045DBF9EDE759C9EBF3E298F
+:10206000C5D480EFBD6E8246C888EEE375AB3F9B5A
+:10207000E80D37EEFE08F163524649A7537A9617EA
+:1020800044C91FE97894A2F26F9AE454699E936E52
+:1020900033D3BD25ABD546EBBA154207149C7789DF
+:1020A000376C23F9773BB82D5462D1D54D1F447F4F
+:1020B000E5FFE8388DEF2FE9944226ECDF5ED70E7E
+:1020C00016C4EFD3757BB91CFCCDE0C6CB101ECB7C
+:1020D000C7DBBC2DA4B734FA32AB26389D405F9DD8
+:1020E000499F96683BAEBBC2E10C4BA9F4D87A3C41
+:1020F000761D8DD94ACA78DC8FBAA63C9DE99368D3
+:102100006170749FE36C004E92F33B5358CE1F7B7B
+:10211000AED84C783AF63B6BC844F52D23DEB8D3E5
+:10212000C7752079732CC36BB6517B466E48C5F6D4
+:102130005BCCA0925C86ED426E3D3FE9AE77488E67
+:102140002DDFE932D94D828E653401A447D7BEF325
+:10215000EF38CEADC8AC766F546F2C9AF2E8C62734
+:10216000900E1699DBEE29C767A7203CD68DF0FCB0
+:102170008BA97D38E9ED8F1FB287CDF4DEC323B77D
+:102180004B38FECBA98191B41FC854FAE7E0F39A0B
+:10219000437DA105DF9FFAE83F0F92DEBCF5C9BE83
+:1021A000CC5F3ADD4F233EC4F59C403EA4F59CDC59
+:1021B0003784F92E8A7F0187C5280FC8246ADEB1CB
+:1021C000CE4FF80C24CBFCDC02AA7219E17BEF4D58
+:1021D00040765381645288CEBB9A115EA633E9499A
+:1021E000196FE6F7169951BF121D06E44282C7091E
+:1021F000935CA0F105D07ADE7F6EE4F6167C7FAEAC
+:10220000D63F4A774797FC86E86EB3DD6BC7251C3F
+:102210004F32EA7DBD9C393E9DF9E516C79760298E
+:102220008C3E5F52FBB5B19E0F0AC98D8206B9F094
+:102230000E2CEFD4E07EC548FFF7C7E3FBB7B5AF80
+:10224000DBF38A4CF36EFEE9DB34EF4B4E9E175EF8
+:1022500011F03B6112FAA55BBF3AFECAE3A3E4E1C9
+:10226000F5EACF3F7EE88DB1011CFFE3DDA38703D4
+:10227000D2DD02A9F3A307115F9FBB3ADFF93996BC
+:102280004FBF74A81FC12F7EBD8B6ABF004B8C1C33
+:102290003A6E32F17E17D13EF0F96F0AFD3733BE48
+:1022A0002DA827106E0B5AC66C2779304DCA4F23C4
+:1022B000BBE9C431E3FAE2D7A98FAFAF4F1F5FEF9D
+:1022C000B78CE08F709838CE2DF4ABADF373C2EFBE
+:1022D000677B469B9015A3CF333AC7A6E747F1E447
+:1022E00057EAADD4EF1A12F5888AB90E81D7B935FD
+:1022F000A650430EF7E3F6EBF039E1BDC2D3C0F5CB
+:10230000394ED467D87F51E66F785D24E81CA8D792
+:102310007E00FA4FF5AA5F61BF3797A5B25C987B44
+:102320004B9B95ECDC6E79A6BE6D3E3DFADBCB3364
+:10233000849EECEE07CCC3A43F013767C1FA24ADFD
+:102340006E2AF963C3AF483EDF99EA95D064841AD8
+:1023500019C2C4D7272144F05E6D0AB2BDE7203D03
+:1023600080658BC99B69C1523277F5019E27C47085
+:102370009A06010BD57F6B8A3400BEB7CA539949C0
+:10238000F4FF2638FD6417FD207DF51892A395EE25
+:102390009973E9F96C35D5DD82FB6DB4CA77E793A3
+:1023A000FDF303C94B76AF0E175D7FCCB578AD0456
+:1023B000DF7E41D9AB22FD16BEA2384C0C7F874A86
+:1023C000E3BE6109F6A575BDE55C3FC664263B2DFD
+:1023D000E41A839B7DFBD07F14FD1EDFFF2328932F
+:1023E000C81E98F35B07CBF19B40667EFF11282C3B
+:1023F000C76F8600D76F8188F54B7CEFDDD2FFD9A0
+:10240000B91FA2FB7A77E257BBC9AE9F2BB5F7CDB8
+:10241000C176B512F248CFFCDAF17FB646701D4A9C
+:10242000830592D0BEFA35D129D9EF475DA19DD859
+:10243000EFAEE42DA91D588F9884FDA556069FA4E4
+:10244000FEAA19FC0D58F64D0E3C4F7CF8CB14310A
+:102450004EADC5E126F94806168DF3D13B2EA67781
+:10246000D2BB3761BD0CB145F03AD157D09BFA577A
+:1024700060B97BC2EAED5468DC53B27727BD3AD528
+:10248000CCEFC36999D75116A75F7CA3CDFC3EFC66
+:1024900043E6F72775590CFAC537CE1C7C1AF73777
+:1024A000E5EF965EF5CECD05827F7C7DCCC144F60E
+:1024B000E0FF68FC851092683D0D7B4DA116264219
+:1024C000611F94E9F40891D5446FE50041A27BD8DF
+:1024D0008B7A4C9F2797F7FFB9EA233AC476B60761
+:1024E000DB9F2739690F0A3EC1FA54DA8F23085E51
+:1024F000B2D750218305EB49F8A290BB6E203BB6C2
+:10250000A502DAA93E092212E17B0A417A08F9C341
+:1025100032D3ED5450B8AED3F1F740E5F272087102
+:1025200079258485BE07B9F1299CFFAA4F40EC6745
+:102530005498E91D1D19F747686FC0E5B798C9EEB3
+:10254000F0FD30B1BF30A840870B22C473EE709904
+:102550000E814C31BF80879D9EFBA2F070C4C123C9
+:1025600089E0E18DC203E710F03803BE023E931408
+:10257000840FCAA7C9D025D13C8A66DF548297CB85
+:102580002AF073D90B5C5EA8F79C09979248C01299
+:10259000C84F009FA989E96684069F3F1600CB2F8C
+:1025A0005DFE5C5B20F3735D0E217F66923D1A2F0A
+:1025B0009FF4E7BE94CA2F64A487AA82AC7916D48C
+:1025C00067BEC2CA3B8760FDEAA7F344BDACF257C1
+:1025D000B958FF41C128511F5759684578D59B46C6
+:1025E000CFABC2FA90806923F1E5F27AB4AB715FA8
+:1025F00081A47B8244C7A60C709BB03D505FE42D44
+:10260000C07A00E912106E7629A79EE06CFF397837
+:102610001B7015196981C905B8DEFCF99DAB053E33
+:102620002BFBCFC5FEC73BAD6CB7ACB10583842790
+:102630006477777D69747FC79FFE790D3D7F7A004F
+:10264000B849BF80472EF4BBCE5C8FD9015C5F8C4C
+:102650007283E21F38DF4C9A2F80EA49A6753D2528
+:102660008508FECBEBA7B13F7024CFFFFD82BE31C2
+:10267000E3E33EA4F134AFD073E0C92924B8958CCC
+:10268000F45F4BFD4EB850BEA651BBC0434F6563CF
+:10269000813297E68D7F6E4EF9E6862538CF52A4BB
+:1026A0001192D38B0B0237D2B84BCD914185F86C88
+:1026B00065CA3B36A60B05E993E403F12BEDB7069B
+:1026C000E991E87ABFE057E40077B7FD8AF8F5F8BA
+:1026D000BB6E58E813224EC2FF15CF0D3E8F6635F4
+:1026E0008D7F3BAD63A9D4B590E8F2F3F4D76C7F4E
+:1026F00066BE1C28E84E935B4B9FFB9AF9E7593363
+:102700000425CD3F8618BE5BFA5C9285FCC3A59F6D
+:10271000422805DF2FDBF77803F93BA5E8FF939FFD
+:10272000BC78D753CC6FFB485F22E896FEF7B3CF57
+:102730003F487C7A6512C7A126BD767408D94153FB
+:102740008E461A106D70E2D9372E13F4AFFB257F39
+:10275000339D8F1E9F26ADB887F0BD0CF16FC7F972
+:10276000969982A26E75B855967BC24FAED1F6F19E
+:1027700019746E9CCF72453D504AFBC99480E56345
+:1027800048F81332FE23FEBFFD686835AD13A46F11
+:102790006C246F4EA15F4CFBBAFDB178BFA3EB4038
+:1027A00029F9DDE417E33E17B71BDB97C6EA870478
+:1027B0007EF296022D1E960DD9B4AF5FA33FF4C1F1
+:1027C000309A777E1AD9871329AE90405EEAFE715F
+:1027D00028B9F29102B697DB25E287324BE2FE0B75
+:1027E000F3855FACDBFFCB1E92D88F5BF6509F5119
+:1027F000EC276BFC0A612FF3EF93A45788CE022FCE
+:1028000003D1C12DDA9E60731FA6B95B9B4CECC748
+:10281000D8A53BBCA4F7C73DD2FFB67F63BA4975C4
+:102820004326D527CC7DCCC3F655908435FA556C1C
+:10283000673E99DE954BF33F992E838AF3352475D5
+:10284000E5929C559F757849EFC6AFFBED02E10F0D
+:102850000C098FDF14F1083C139FE7BC54BA89F0D0
+:102860007C12F99CF0B7CC35BC3F38C96E989C19E6
+:10287000C1B241B3D3731E1B95361BE1E2A3F5C66B
+:10288000D8D51DAF5E9342F6F26E8B3FC58DFD4EDF
+:102890001ECE35F841F16551189153D84BFB1B33CF
+:1028A000870412C05D2F7D9B2C0C2F9D6E7F5DA732
+:1028B000C00756C247B9D8876A77DB7D447FA1A994
+:1028C000E44F2EBB19DC2DD87BD9CB0F3738A8DECF
+:1028D0000C4CCD27E97FD4FF137388ECF15FA68CF5
+:1028E000BDB71CEBBB8E59849FA22A87F263EC58BC
+:1028F0007BA6196403BD764A8B491E13DD23BD26D2
+:10290000C9C920C7D0634A5E86A1EEF20E30BC9FD3
+:1029100056926B684F574619DA8BA13612C0F514E0
+:10292000654AEE10AEB8CF8C0243BB1DE93A4CEBC2
+:10293000FC52D85125F84FE8DB20DB4365118007B6
+:10294000900E261E37DA59259136F637930E5B0C1A
+:102950007100FB59E250C9851A7F0D8481C45F481C
+:10296000FF5E9263270F8BB893ACC17359B6D0CF7B
+:10297000CB5E96D80E5C76CCCC7AE22478BBF14361
+:10298000F251E7BB78B8F7F51BE1DC7FAE11AE5929
+:1029900001235C2FAB31C2353B6884EBE05A235CEA
+:1029A0007354231C87344D34F41FD65669A88FD82E
+:1029B0007485A1FFC8D06C437DF463D71AFA8F6980
+:1029C0005F60681FB7F736437B3C5D8D0F2F33B4D4
+:1029D000DB538F305D1D40BA32A13E287CE9DFE237
+:1029E000E8C2C2702F1AE8F48662F0AFE23FC27FFD
+:1029F00099969798006A03F1E385C2FF1584FF94C6
+:102A000028FE75B9DA139FEAF81D42FA9AE565794E
+:102A100084F07EB22485E9E5E04B270F2B40F84F88
+:102A20008502DCEFAC29228E22C9C126A2934E700A
+:102A3000B591FDB9C61264FF4545B3702729E53845
+:102A40007FF3FB25E86FC6ACB35A49024BCC7EC777
+:102A500087DB0DF5C297F61AFA1775860DF5F18723
+:102A600041227D55F0A6F7792A8B3E5438FC55FC5F
+:102A700049F0792A4BBF0CDE45FA37DECFBD5AAD9F
+:102A800097D2C8AFFF7BFBF368D6A07F364825BF3F
+:102A9000377247AAD73400E191FC4E03F9DF807604
+:102AA000B4159511B80FB23E98EF10EFFF2D69F2F3
+:102AB0002AEA6F42FF9CF08E70C9237BAF1692BD4D
+:102AC0000417B25BC80F832B843DBFDAA4B23D9AD2
+:102AD00084F628D9230D157EB697A74370203DBFF5
+:102AE000069455C4779219ED577CFE3F23028D85DD
+:102AF0004562B1443F777D21B3FF3D85FC6906A661
+:102B000002A4F74ED0EFB43E78691EC5E34F902E75
+:102B1000C3F5B7B5BC304F253BC303EE08AE3B2031
+:102B200040069B0B03F7D0B8EF9BDCAB0BF1DD83CA
+:102B300013FF3288EC917585C2EEB34B0829A4814E
+:102B4000FEF315A0E78DD9CA7D8545D1384B4FF4EA
+:102B5000A3C733F5F8E6AEBA309716B75722BA8B4B
+:102B60008F3B46CCEEAAF1A4FF9699D8EFFC0B2D33
+:102B7000AE94E7496539EF804E7B3A2F99FDFFEB24
+:102B800035BC991D9DAB7E8EEFDD1014F6D60293F9
+:102B900097FDF5DB338F731CC52E99C047FE505A45
+:102BA000FE76117FD1E3259749DFC6CE3ADB7E6FF3
+:102BB000CF3C668857C1137D12C6D7A3E3ABACFFE9
+:102BC00062F6B9659347E835F2F3DF6FCEAE84D491
+:102BD00044F37CCEF1ABEB83AF1AF8E2C6DAB70C64
+:102BE0007C7093FA9EA13DE2E9B252BC32B2276BEF
+:102BF0003AC5D73FDB6D2F263C20FE0F16C6C4EB2F
+:102C000022CDA3AB60ECB9ECF72FBC8EA3759D8CE5
+:102C1000577DBFEFD4BDC9F5485D84CBF8FDEAF11F
+:102C200011BD4471D844F6CC5D12CA0BF277495EEF
+:102C30007862E405401ED9FF7749A3BC44EFB6FD96
+:102C4000C147A9BDABDEEEDEEEE3F808C74D6A91E1
+:102C50002EC86E00A7787F81CDC176E81D3EE12F9A
+:102C60001EADF8EA06B25F7320D58B32107FC27FAB
+:102C7000A2B8C97C531AEBFFD55907B8FE61338857
+:102C8000BC514DF821F25797A6A60ABB58C1FE5871
+:102C90003F9161E6FAA11181AF981FF3C39CDF5801
+:102CA000DA5FC4F3C01319447CF833D9FFB5E05799
+:102CB0007780DA6B32D0DF46FAFDC4AC8E35116B0B
+:102CC000ED1A70AD05F1FE49B2FA395934637CFD55
+:102CD000AE253FF3139BE0DF49BB4ECF53113E1FA0
+:102CE0009A24F6CFD5674C1CAF0167C4568D7ED8A9
+:102CF000038303561F8EDF66457BD2299ECF1E13AA
+:102D00008DCB9EB0624971D024513A7DC2EE75F9E7
+:102D1000449E532F4710CCB09CE4D3E57CEB708AE3
+:102D2000BF9DDC6C07925B38BF42FE96FAAC88E32D
+:102D3000F7CBF02F028117F71A5CAF6788FC05F11B
+:102D40009F4742BF16F721FB720CF167726053B1C7
+:102D5000FDFD3DF66D84BFEEF51E16F1B0CF9A472E
+:102D600073BC5BA713D9A7C5BD7F0C20DA2FDB4648
+:102D7000ED8B5F7EFF1D8ACFFDA63030D487ED0B33
+:102D8000CC7231C9C9C5A91D1CA72BF6C93C2FAEF1
+:102D900097F78B72AB117D7158EC88705CEF6CF11A
+:102DA000FB9EF6FFD9CD9D1BF3395E2D8F25B9A271
+:102DB000CF8BEB28A675E8FBD4D7111DA777FED1E2
+:102DC000E3D07AFDE387D60CD7F20837FA13E8E5AB
+:102DD000AB743AB6268EFBD768F88CC74FC18860B3
+:102DE00088E3796E703760FD5A0D4E9FCDC3FD703C
+:102DF0003C44194FF85D3CDBE92538EBE3F7CB8029
+:102E0000C053BDCC73C548FF1CA2BFDB82224FA0BC
+:102E1000B723FD893867730AD3EBE2E7DE7AE7E789
+:102E200038CBAD8F8E2924FDA1BF1F0F6784EF70B3
+:102E30005ACF0249E4CF10BE37D1F8F1F981F385BA
+:102E4000EB89EC4ED60B27B6FD2C44EB3B91056E7F
+:102E500013F2E3E27DBF7DD33496E8C41996B084C3
+:102E60005DC6F857BC9E7243E03A92237694236481
+:102E7000DFD8F5F7065A0CEF55672A77F9D81F55B2
+:102E8000EE2679645785BF362450C1F5E556E1AF8B
+:102E9000EDEA34CBC4DFBB2C10223DBEFCD50C9533
+:102EA000ECC7E56877B0A79317E4F54232FA41E939
+:102EB00009EC069357E6785C5A600DC14BFAD1D401
+:102EC000079FC889FAA3BABE2CD2F4BD927F6303D0
+:102ED0008DEFD3E281686772BCB314029A1DA1C55D
+:102EE000E19A0F701C4297DB3698EBA0F8CF9ABEA0
+:102EF0000B1CE41FCA382CC7D73CB3D3A0173B72B6
+:102F0000551D4ADA11D1BAB5073F5E3F1FC06BECC1
+:102F100047DB0512D6D07AD5814823FEDA3AEB7723
+:102F20005D2F60D932E691C84A6AFBE6B44476A4C4
+:102F300043B303B8E847EB14EFD906AEBEC384FA37
+:102F400033D96B81F763F4A00339FFFD3C6D5EB2AA
+:102F50000732BBDBFF4078EB691F17AB24F8BC6F6F
+:102F6000EDA5DDE6AD49240F12C28BC8C433FD18B0
+:102F7000D16332C4EC9BED9E98BA14072F89CAEE38
+:102F800076E57482FCE577DDD7AABAF0AB1F1AECC0
+:102F90008110AFDF6AF18317E9C9E6C176C3390C46
+:102FA00055CB7F220117C7ECEF1CF64576B955DBF0
+:102FB00097F522EF8BC6F5F7BBA4D7A75EE2EB0B24
+:102FC0005FE2F885EA4B1B7E4AF5A50D3FF5125FDF
+:102FD0005FF812C72FCCBEB4D7A7CCBEB4F1AB5E9E
+:102FE000E2EB0B5FE2F885AB2F6DF829575FDAF063
+:102FF000532FF1F5852F6DFCAA6C073ACB81CFCD0D
+:10300000A6379A4374CE46AA0A73DE3857058E4710
+:10301000A73603E72BB67B851FA5C7E947D2103239
+:10302000FA2D567716D9D1DB1BEFABFC318E732A04
+:1030300013174FF9FCEC230A8DB36D1A70FEC2D939
+:10304000F8D1518A7FE540D81BCEA1B89A04E11887
+:10305000BBF4FA600A8463FC896AA58FA15ED43947
+:10306000C0D0FF964D430CED37B78D36B4FFA8A9FD
+:10307000D050BF492D33F4B7434E4B1EE55D1B2D99
+:103080005ECA8359686FA567C20D76D8F83D05FF03
+:10309000911F9383167DF7B8B88F74D56618D7192A
+:1030A000D77EB67C407C3E614EB1964FE8FE7E41B5
+:1030B000BC0F6E4FC2B8A79E4FD0F139DC92C4F856
+:1030C0005AA78A7CD39A69C28F9C1A729B286FA9CF
+:1030D000E36FB44672FABEB7D519FDC9F446772539
+:1030E000FBA34DC0F9DCDC2A7348C9A138C1C04A32
+:1030F00007E239B443D04708047D841A81F385A1DF
+:10310000AADC95D47E2A047C0A46A78FD1550B678A
+:1031100052DCB53EBB5F16C51972AA043D2CDD6BAF
+:10312000A4034AE7D256D30F4BBCFEF4FA8C02CA72
+:10313000E79D819727049CF5F3E7E97170CFDB6188
+:10314000C44B3CDEBE2D5ED614C77F57F2EDF06255
+:103150009B2177A4519C540599E2322F660F373397
+:103160001C9ABC8C9F19D88DF830A70938DF134FF3
+:103170008FAD7510AE8AE1DF1C6F5821FC4C93F2C5
+:103180002B99CFF0DDFEC0A744195FDB9A44FE16F1
+:10319000CB641A1FF6CA0328AE105267F3BAB737CA
+:1031A000DB92E93CDF57F566A0F3F2DB73E40194B0
+:1031B00017DBFE8C696EECF920A40ABB3993F7612A
+:1031C0003797706911A5A2956011ED6189EA835660
+:1031D00098E3F0A94AD49E3E2339EEB962A2FE5B81
+:1031E0008A73193E694A86015FD61223BF23180FDE
+:1031F000E5A37C1C4CBFCB4457824E42AF4BA195FC
+:103200001C5FE932D510DD68E72DD257CD06CA47DD
+:10321000D567FF742ECBAF7A1BC31D5608BAD0F307
+:1032200082D6264187F1F4E3F21AE9C72A0D3489E0
+:10323000FC96E01F7D1DDB146DDE2C0954967BB6D9
+:1032400001C467D6B8F1EC243C49DE78045F3A61EA
+:1032500036D07BCE123BE7B1413ACAF8B74E00E810
+:1032600013734E217EBD675DE777A4F30FBF239DE7
+:10327000EBF267AD57933F45E25CE429A46B8A1FEC
+:103280004DADEA04FEFE0ADC26A247A4835959C5C7
+:103290007CF4817F76911CB213BCAAD3A8DDD5A99A
+:1032A0004C25FA9D2EBDA2B8709CB587059DA37EC6
+:1032B0007989EAADCD16A0732628674C3FA2794BD9
+:1032C000EDEE952479A481E369DD853E943B1447B6
+:1032D0007CC5282F8A3A8D70CB8D97EB3DC0B127E6
+:1032E0003D110F47D7040D8EC508C721DF1E8E364E
+:1032F000AFD0C3E92542CEBE98FD537ED57D589C04
+:10330000AB495780E1FA852AF4F274E97898E4CB66
+:103310003A05E50BB6CFD0DADD25429EE870CED572
+:10332000E0ACCB9375F32183F8DE4DF2C44970FD18
+:1033300088F5765B9180334084F39FA98AE09335CA
+:1033400056F0529CB6ADD4E9A57861AEA2C1B7499A
+:103350008397094C04DF78BA9421A68EEB4B8DAB92
+:103360007F5BF8964ED0F4643F283E1FF8AE4B4981
+:1033700015FC3654C0C7EA8CF0B9E6A61C8B77253D
+:10338000F275470EC21BDB9B5E17F0FEA5D67FD5FC
+:1033900018E07A53DFD5990CAF9C859944CF4DD670
+:1033A0003695F2584D3AFD69E7C25C9A9C9886FCC6
+:1033B000BD00DF5F8DF289F290A92501078DD794BA
+:1033C0006F0189F7BFD99B68FF0E9FCD20072FABF8
+:1033D00031C235250E8E49DF91FF7F3CE1BBF1FF05
+:1033E00076FA15FBAD1906D0C979C89083E0642B35
+:1033F00099984C74D4D2BA9DEB32849A7271FF0FB3
+:103400003B85FDD5D23ABBD7F351214D2E6CA97324
+:1034100070795F9D9BCBB6BA4C2EEFA993D97E698C
+:10342000ADCBE3B2A5CECB65535D0997ABEA14EE05
+:1034300027ADCDA860395C051CCF5E99F239E7DF76
+:10344000E3E7CB518D7A6C706DB201EE7D6618F5B5
+:1034500055BA62D457748E29B6DDE51D65684FC92B
+:103460002B30D493E48986FE5326047E3981E48090
+:10347000A7324E0F223F8E899EB36B6915DF4BE951
+:10348000F0D3F59353E3F33556EF00CA3B395B05B0
+:103490009F366B765E13C111CB6405F8DC8CEDB002
+:1034A000E40D01F1FF6AA6F38771EEFE488B1DD98A
+:1034B000D7286427B4C8C28EB78238F76BCBF4879D
+:1034C0006BF07912EA2FCAEBDAE6A6B05C78D8E3A3
+:1034D000F4D239DB96D6656E5E8F579CA771E3BF39
+:1034E000447980F8F3358EA1C67339D6B39C6FFC4E
+:1034F000754FF4DA9491508E9C2167BBF32FEF6BDC
+:103500007429F22FF778043CED3DC8A3D6387BD957
+:10351000A9E55F60A02F61FFA83D25F20BAD717199
+:103520007BF4C312E66FDE9A2071FF3F4F9085BF98
+:10353000660903C96B9717DF8FF53B14F17DE8B976
+:10354000CE8F3F3E4F8C7C0A2407FE3C019F2B4FC1
+:10355000083B254916DFA1D84051583E81C887D085
+:10356000591FD237A95ABEA75BCE908888A13BE7E6
+:1035700019FEAEC88BD06716443F96E8FB17C4BF50
+:10358000FDB66523F9C3C37A69A7FC5002B9E02AE6
+:10359000D1BF1F832E4F3180EEBA23FC5C2589E119
+:1035A000172678359AD6CDC8C5E7A95E8B173100A6
+:1035B0001525F25E3A5FB14A4965FDBEAA446E2701
+:1035C000FEF942717A091FADF955ACAC93867DC8FE
+:1035D000A2B7B1C4C676BA8E87246D5E444F679594
+:1035E0000E67ECEFCC9B11ADE37FCD6336725EAF1F
+:1035F000E5AA4738DFD732EB3F38DFB73A6B7A1EA0
+:10360000C9BDA492E9C7F82097861F660DD2237919
+:10361000C6FCDEE9D3A2CE70A0F8849607048F31F1
+:10362000CF6791FD86F92F349E60A0D0436051F89A
+:103630007B8333E95BF0B5DEAF673E50F5EF4E5765
+:10364000D2F9E0268F90A34DE07D3340F55724AFAB
+:103650002AD3F38237E9BCE9EA8116C6CBEACCD992
+:103660004DC28E177E53936725E76DE3F5369DD7E0
+:103670008C95DB745E3356BE37C9B37BD5CB59010D
+:10368000739CDE37BE9F1D34EA1FFDBDA4CC2B5FAB
+:10369000AB8A392FD56CF13B485EACF2DC678AD53A
+:1036A000730F2881052531E793AC99B3F83D7BB6BC
+:1036B0002FE1BAAE50948544DFB8FF5EED81F59AF4
+:1036C0005CDCA8E997B3ED7393D6FF01ADFF66D23A
+:1036D000EB23A2F8193EF4F26496CFEB441C8379F5
+:1036E00020665EA524B082D615C5AB390A17A4D3CF
+:1036F000E1F957B0DDD1B06E7632E169E7FADED795
+:10370000A3E7D5F57E7A1E353EBF6EF3980DF0DF48
+:10371000A3C985175C0B2B1F40D0EC6C13F4D4B0FD
+:103720004EE891E14F887D9C4987C6F5EE6CEBDD54
+:103730000E8AEF4F91C56E3AE17A465C7D405CFFA0
+:10374000DCB8F65171ED0571F58971FD2BE3EA578F
+:10375000C4F59F1D57BF36AEFF82B8F6DBE2DA979D
+:10376000C5D5FFCD884FDFB56989E0188F3FBDDF34
+:10377000B9E2EF5D5FC57EA2A3E13083E945A7B75B
+:1037800073C543D4DEF5339DD94A46B17CDF81F65B
+:1037900015D9433BDB2ADDE27C4760E56E8D3E4870
+:1037A0003F58368879D0CE4AE6F89CD36390236799
+:1037B000C3B709328CEDB17668EE85C7F7D9E93326
+:1037C000A4D917BDAF5BE7E32913FC27490E414895
+:1037D000F899BA5DBB4D15FCB34D5D50B99EE46DD3
+:1037E0009359C49FB5FB50E86E1D11270F684A38E6
+:1037F000C2F18426CD4F68D3E4C95A4D9EDCADF9A1
+:10380000094943839B28EE9B7C988FE740B3AFE048
+:10381000AF0B103FF797166FA3EFC7EE1E53F2F8EA
+:10382000C35877FD5D827021DAE9635B14B259DA1F
+:10383000948C243A4F946272B4939FB8AAB0CD3F4F
+:1038400014FBADDD7FACFD79C4B39C69F3A2CE0758
+:10385000D9D265227A837C2F7F9786EB54C9C6B272
+:103860009677D5253A77BAF60AB7898CB0F419B2AB
+:1038700099CE11F79910E85B8AF018DC046605EB25
+:10388000196A98CFE25C532A0BFFEA196428DE6FAD
+:103890005716C1EBAB66DB7EAAF68C0F90B438DD11
+:1038A0007995FA38698234E887E38EB245ABAB8FFD
+:1038B0006CA6F3D04E49D4A73CF3F8FC95F9D1FAA5
+:1038C00098671E1FB812DB5B0B0799489EA67B52B8
+:1038D00013DE137375A9909FDB9B170E4EE48FE9DF
+:1038E000A53C13383021E76B25D1D4042C876AA579
+:1038F000AC3DCF14F52B35B8C9B55ABB4794177AF0
+:103900009EF8F1E794BA753B7B809F8D6CC877F683
+:1039100033D88B5797F6622FA279CCF1DAAD56796E
+:10392000009D23DCDA6C03BAFF616B3688EF905799
+:10393000D9F8DC2858DC03AE7145D71D5AD56F1E67
+:10394000D14DC80486386EA6065FFB4493768EF28E
+:103950009B307DC7B755CBF36C8588DB9D1F8BE70C
+:103960005FCD27BCEA78DE57FAAFCD449F1DD90B57
+:103970002B37E27BEB1ACD1C3759D798CB744EE32B
+:10398000907D746AC52133D9ADF9D06E263B7F1482
+:103990007D793D84AE400A70D9AEC9E7FFD4FCF80A
+:1039A00061A0F0F341D0C5C0F9B438F01382CB1058
+:1039B000126D12F18FDBE4C07996EC4BAF48A4B7DF
+:1039C000EB4AF5EF7AA1C652ACF91732C3B78EF8BD
+:1039D000281EBE74429FE38E8ABF9EDA9D7B5F0DD8
+:1039E0005F86D5DD6F18E993F0363B46CF6CD4E0A7
+:1039F000E7F6FA15C2E1B5C581167A7FC9A6BF1EE2
+:103A0000207354565533BDFF14E11D9F2F0C07A79B
+:103A1000D33063BCE14AEA3FBA76DB7E8AA7E5058C
+:103A2000EFA8EC8FEB1BAE54577A888694C0FD3418
+:103A3000CED0CE48850BEBCE4DAF86B3783D6379C3
+:103A4000BC5C7D3D480FD54C476E11C7D7F04BF895
+:103A5000A773CB0B370BF8607B16EFCFE2CE8A5DF6
+:103A6000FFB669FDF8BB8578BA68D5E0F758148EC3
+:103A70006035FA358F2582A34EA73A3C6E78A26B4B
+:103A800015E53AE7873A5F2439E8DFE49EC6F2B0ED
+:103A900038F024BDEF6BF337701E7057275D47D4A5
+:103AA0000D1FA7D249D7BB603FE569C2FBD615EF12
+:103AB0005772BC782F88B8589C3ED44BAB129F6786
+:103AC00010F7E58CDB6BB493915E958D9E587A353B
+:103AD00073BE33A4E9935013D22FCDB742D06F48B1
+:103AE0005DE64E44678F687A658746B7FAF3A13D75
+:103AF0009CBB3C54DAED27664A46781EEA8DEFD32C
+:103B0000C0CBFC807C7084FA65101F607DF00A37A2
+:103B1000D3A7CE074BF6FEF500DD67E3F4C905B188
+:103B2000F7D745343C227DBE43EF2FD9D475807C36
+:103B3000C5C12B047D7E4C77871545E90CFDC7F781
+:103B4000A89F4E3FF1FB78571B4F2EF67F4C785CB9
+:103B5000B829C8E321FF1C2BE5713AC349CC724A4E
+:103B600025ED676B1BB8693FF65F1474905C3855A0
+:103B70006B62B8DE981F5E65C6F2FAA160A5EB869F
+:103B8000AA33916C72298F6BCCFF0D6B33E20FE976
+:103B9000E76F344F91276013C1EBA08DE5690F7477
+:103BA00011D57BAA0EFF157172D73CB1177A3ED79B
+:103BB00071D7162B8E8945DF621DE7D84F8F379D51
+:103BC000193F1DC5FE434BD36CFD9CF00CBA8F67AB
+:103BD0003BC54F11AEAB9A7AB7572F58FCB4F9A436
+:103BE000889FAE008E03AD4C196B4A44379740FC5A
+:103BF00074CAC444F1D3C87B063B735593900B3A07
+:103C0000FC86578D4C16792948A57C891E1FD3F751
+:103C100075B7664F3669706B21B8313C05DCDA0840
+:103C20006E0C4F1D6E33843F425F8853BCD66316C3
+:103C300079B1910B3651BEE054A6C893D767DB44E7
+:103C40007B8EC82F9C411F9931F634F2C19A667160
+:103C50009F08BECF79B517B30F3886509E33D3CCAB
+:103C600071DAED9EFB6AB6733D99F9CF0A6A5B1E65
+:103C7000CE3BFCC3B9EA027A5E62E773F27A3EA7F2
+:103C8000A5AFC8E7B8F2B47C4EDC7C76B8A9B28D9B
+:103C9000E6CB137E4B8F74ECD3F2115A1E2823DF30
+:103CA00098AF70C4E52BE2F3956B9A17ECDF2EE228
+:103CB0002B2C9F87FF7824FB63F1F3B8671AFDB7BD
+:103CC0003523753FEA1147A2EF1852AB8CF4D8A206
+:103CD000E1BBA1AFC8479C6D7C284F36F8552D79C4
+:103CE000E71647D0FB911FEA4ED03FDE0F3D1FFF86
+:103CF000D6CDE31BEF074CE0DF6E99C8F11441DF2E
+:103D00006B9AC5FEBBE3699A5FA59F3FD2C7B16AB4
+:103D10007E1CD773A2724ACF870D75DB985E876AC7
+:103D2000F74535FC7B4A68650EE5D76675513E72EE
+:103D3000E80E89F3EE439D7ECE43746C98CEF9F184
+:103D4000BEC981A727C6C49F76B87E9AC9F9022D3D
+:103D5000DECFF7E6A0DE53D715762A64EF8E04BED9
+:103D60006727392E1F107F3F4E7C7D4E99D0C39917
+:103D7000D741C27B4F3E9F28DACFF4DFAF6038A136
+:103D8000BF9B2CE4ADA2D7FFBFE4A976B61DE2EF3E
+:103D90007D4EF94093B3FF0997A29C3D5112389E86
+:103DA00050CE5ABA58CE8627289F919E5C4E177DDA
+:103DB000101E6E4C7C3F8F5C76A9E2E16981877CA6
+:103DC0001D0FF75C92F942C4437659223CA05F452F
+:103DD000F06AF32983A85D29510653D98D8F1F26D8
+:103DE000E68B5965C2EEBB58F858A7E1E35EC207FF
+:103DF000C769642D4E93C7CF9B357CAC39031FEF49
+:103E00000B7C94E8F878EEBCF09151956168779757
+:103E10001BF191EACB35D49DF9467C240F2D308CD3
+:103E2000B7BC4C16F7240D9C68E877263E8CFEC084
+:103E30009DF45E2FF6E8C04067057D4B34606E7BD5
+:103E400007C9E64C7F5B0595FA3E37C7F9737AB927
+:103E50005CC35FE6D4C4F85DA0F15BC644E526030D
+:103E60003D7C2F317FD668FD979728B794C5F2F334
+:103E70009589FB2FD1FADF3641591CDB1F7FD64BCA
+:103E800031F6784FFB0E242BCBCB78FD224FB6A317
+:103E90003E95F3663B92E476CA57ABF54EC3BD75CB
+:103EA00083E937AC67FEE89B0E95CED9D13D4168DA
+:103EB000596DBBA35FEE1A6CDA96317C25C1B1A9AE
+:103EC0006C88B8BF7591FF6DCAEF28EA09ED1CD266
+:103ED0007CBEEFC814EE63A27BB2C09D714EF92385
+:103EE0009467E25EB7C120BE238620EB41C90FE98B
+:103EF000F4DDB205FC225F4EFDC5F785BCF9140860
+:103F000073DD0511AEA7697EDE0365393C6E3AC8E4
+:103F1000260124AF89E4A8CEA70E4F90E9DF53EB2A
+:103F200036AD245FCE0250467EA073207FCF0B9526
+:103F3000A0523ECB040EB6334DEB0F7CCD793AFD4B
+:103F4000FBC397FB88EF0FCF717FE7DAAF91EEE508
+:103F5000F344EFE56BD4EC01FD5E3EB532C8DF976C
+:103F6000AB2BEDEE06CF99DF973F3A31B08BF0FDEA
+:103F7000B7A4412191640E4E98EDBAA0E3872FF2C9
+:103F8000F8AF5CE4F1DFEC6DFCBBE9D752CAEBF9AA
+:103F90008F123F37B88AD9EED4CB78BC5DA12811F7
+:103FA000EA27395E1BF0619FA83DE73C6A627FA863
+:103FB000C124CE9FA9EF99D8EE827C41074E19F219
+:103FC00072C645C7717A838345DC49C45FEAFF74D2
+:103FD000D708B2BF7F99322B9286E31D7C55D87FDC
+:103FE00096A991CD74BF73FF349B773BF2DD3DDA28
+:103FF0007AEDA513EEBD137FBD798A90172E8BF74E
+:10400000F2023EB7343342F6A3ABD82253AEC01906
+:1040100097D76CB5B42553BCB275C77D15A3B0FB5B
+:1040200063752FB91B137CEFE9D4F29A23A5C472F0
+:10403000F09F939244DCCB67BC4FD85AAE9D2B497E
+:104040008554B2232DFF52D2129D07D04B7DFE2204
+:104050004FA48ABEBF8ED0256E88E7A292EAA464E0
+:104060000F9F8BE824F8567AC30EB27F1F5F10BCF7
+:1040700035F6FBD3D61270911DEF9B22CEC36E5046
+:104080002417DDAFF160C4C2F78E3FB8E8E9E6144B
+:10409000ACEF3D6A76133C5AFDEF3993B1FE388E92
+:1040A0004BF2EEE00E71CE529D0FA16108BF56F2A9
+:1040B0002AB1BE5B11E7B2D9212BD6AEEA43F8FF95
+:1040C00075725F016F0856D3BD9DEB5226F37D9646
+:1040D000D973443C78BA74B483DE7FB0C4CEF81B85
+:1040E000A29DD331A9D57C9F65DFF9C6733A0F2E07
+:1040F000EF5409BFEE52BB5BE5F3974ED7587CDF18
+:10410000F5A8192456715D3CF974C929D6E5157EC8
+:10411000EEE37258A5FB8EFBE27BF56EBE35D170E7
+:104120001E68F726E19FA68D777A91D271BD71E75F
+:1041300085F475B5E1BAE8DE63D7508E4764CC31BB
+:10414000AE2F2DCE6F70C6D5A79677DFE3339CF0E8
+:10415000FD85FFA785AF71AB574EE47FB6D64167AB
+:1041600055CCB904670F71C09AC982AE6D592F380A
+:10417000C84EF9C27FC4433878E59F073EBC97CA52
+:104180007FFD6ED75284CFEFBF7E73C793B4BFDA83
+:10419000BB0F11BDEAFE189FC1C4F5BC586D63B8D2
+:1041A000F96768E7397D1D2F587DDCCEF9A5B5FB91
+:1041B00093B87D64398492B07DA445C9BA99E8AEBC
+:1041C00053F2D6CB3488388FA8E37FED0D7E138C65
+:1041D000213CFA25BA0F639A76BE76C3229009FF76
+:1041E000B645ED7C5EDDB75C9C57F729D5497CDE92
+:1041F000748E99CF87D4575F73F930ACEFBA5CDC1B
+:104200004F3563B9328FE75704BDA475169B9713DA
+:104210005D6689FB9AF4F3A645D0C5DF7F8CF4B6C2
+:1042200077D848DECC4700D3FA5A357C69718322AF
+:104230005FA74AF6A4CB6BC463461CDEE2F1BA4228
+:10424000C7E34818497894A12D99F4E14300ED742F
+:10425000AFC086E54FCFA3F36C5FA8690CAF9EF8A3
+:10426000F91DB4579511740F8B83CB4EB457A9DC4D
+:1042700085F62A95AE60C575CB71DD7BDE38F8D248
+:104280000F71BA594AF5957444AB48CB7B81BA7427
+:104290005025AEFF06E25E51DF4289C4777D92A1D0
+:1042A000BED66389FE3D00FCD595A5FF7D80D35B1E
+:1042B00094A108964C8B968F11F559E487C4B4EFFE
+:1042C0009E69EC5FB63F66FC81B8DEC5366E0FEDC9
+:1042D0005BBA45B5C4B43F87F572805735FBF1FA38
+:1042E0009D66FFF604F2EDDD7261475AFE052AC9AC
+:1042F000B52FD14E23FF5E322B2CDF21D72227BAD8
+:10430000570F00E561AC5F2E1BE5EBE51A5F58FC2B
+:1043100015A0E5C7E01B3DFE803F7BFE388BEF63B9
+:104320005A35C4C2F70FA13EF0F696AFB3782C9F72
+:10433000C6DEDBF5AC2EBF87C1309AFF4B28FF43AA
+:1043400005F341CCBD0DC4F76DCF5FB614E7F11D89
+:104350004DE638AAE45A9FC2F731D535B13C7F40CB
+:1043600009FCB63CE67C4963FAC242922FFA3999BD
+:10437000E8BD47D798BFCDBDF71DD50780F4C297DC
+:10438000485AF65EE8B0B16EEF115AC7EABA762E17
+:104390009D6E85858DDD12E4B8CF154AE04FB43EA1
+:1043A0007B26B6C7F089D58DEF19FC0EE37D9CB254
+:1043B0003BE224B86F28F9C049F3B71E167CBDE173
+:1043C000F0EC24E2BB56EFA124E29B2FE8E2C7EF1A
+:1043D000C0273EE5559661BBDF48BD9EE8674F4369
+:1043E0001ADB150797DF7F2DF1CF8DBFF801C3BB17
+:1043F0009B6FE0E14195CE18BE818799AEBBF9462F
+:10440000ABF7CC377F67BEDADDCD37A2EECB074303
+:10441000FDE04C63FF6EBEA0F1912F1EAFB073BBE9
+:104420007DD2C35BD418BE3A49F558BEF909F24DA6
+:1044300002B93F7D9246DF17986F522E32DF0C9DF6
+:10444000A4C9CFEFCE3763275D14BED9633A1FBE30
+:10445000B9EC4CBEA99AD4F7DBF34DAB3BCCE7E902
+:104460005AE79813FE7D900F347939757EA0B28D8E
+:10447000EC1A45DCDF374D9A99E5F3109F497487B4
+:1044800034EA4FA1CF0F5EDFFD7D06EB67FDFEF541
+:10449000F58450B293160BBAE9AC1371DF6952F987
+:1044A000B4C5A477E93B024A3553F694EC02D4FB39
+:1044B00032D985D05EE1C179365499A04DA62D0739
+:1044C000AB87F1F861B6CF8668717FA7942FBE677E
+:1044D0009A29FEEE85FE5D4CB562BC5FB6FF59ECD5
+:1044E000265C770AF931EE12F17750164D8AD7BF64
+:1044F0006887E0FA3A07DA984E362857F71A273ACB
+:10450000E35CB52F98302FF9D6249376CFBEF233E3
+:10451000A2B3DD6F6C49A673127B24E0F339F383F9
+:104520004FCD23BE73A942DEB4AEF833A52361D7C5
+:10453000B41F1AF5347C6AD4D3F0A9514F6BF51E21
+:10454000E58D7AC2A8A7B57AB79ED6EADD7A5AABCE
+:1045500047E5CDA7063DBD61D2A70679F31ED5CFAD
+:10456000414F1F9E7471F4F4A88B2C6F9EBE70F2A5
+:1045700066DFA4BE1743DE1C392F79937DA6BC39B4
+:10458000743EF2C6B5B943A5F4CCC21EF8A056C31A
+:10459000FB5B65CADB343E949C5BBC269EBE3AAA9C
+:1045A00017AEA6BF2BF3A557F87F3DBDEFAAFDD5EB
+:1045B00091C6183FDC65E914DF23D4EEE1E7B76C60
+:1045C0007E95E3B1675D2F5D105A74A65E45BBC84A
+:1045D000C1F4EB35732EFC7CD7D13A47F0DB95CF95
+:1045E000DEC1FC945C6E9C4FB77F3BAA6D669EAFAC
+:1045F00044C8E99EECA19EE6FDA05C16F7FFC5CD80
+:104600001F4FBF489FE9938B981E2D742FF8179D5D
+:10461000C07FA7EABF4E6EFCBF8A7C49E9C51193F3
+:10462000CF834EA76BF84CB06FEFC5DDF705E3CF36
+:10463000E993CFC38E3E4CFBEE9B70DFDF67385EA5
+:10464000B47D5F30FFE1E6F3C1F7BBE5DDFBE6EFEC
+:104650005132B47D6FF8E735EF515C63C3BFAE7D77
+:104660008AE21AF77D9DB78DE21AFABD726910FDD4
+:1046700091F5EF8F102E2EBFF89E24634ECC774518
+:10468000C0FE7DF4BB13B2377CDDEDFF2BF7CA9182
+:104690007DD2DBBD72AD36635C4F2FAF2A17F64A71
+:1046A000AB691DC72336A05F558F78EB9823E211C5
+:1046B000AD68A7B0DC9953D0AB7DB4AB4EE1B85335
+:1046C0006B9D9FCB7BEB6670B9EBB5256524777D41
+:1046D000AF2D62BDE7F3FAAF7B1881E4AEF8D049A5
+:1046E000CFEFF5E8FE90B05FD2C87EC1FAC393D792
+:1046F0006F8D8D0B8CFAEFE15BD481D178555B66C1
+:104700008CDD23C7FA51A012B944FD28AC1BEC9AEA
+:1047100011EC47ED26BB06EBED934718EC1A7D9E96
+:10472000B566A821BB66ED0EF38C4476CDACF2C421
+:104730007E14D6390FE27039F8FB7F49FBFB5F51DD
+:104740007EE9DDAEC99D7271ED9ADF4FBE30F18713
+:104750006E3ED6EC990714E50D4DAE7C47F9B1D10C
+:104760004CF1E36F2B3F4692FCC837C88FCFCE4742
+:104770007ECC2A771BE2A20765B5CF58B2D37798D3
+:10478000A15ED6F42FD63BD1AF31219C7E5221B110
+:104790009FB3C10BFCF7FDA64BF35F267AD8BDC8CB
+:1047A000CCDFBB3FA88873220FCD11E7A91E5E5E48
+:1047B000309B3E235A9772C3DD4914D72E17F70456
+:1047C0004C97CA39CEFDE00C61E7643BDB2FA7FDB7
+:1047D0001FACB000D1D5D9E2DC146EE778B5E6475E
+:1047E00081B499FD0ED70F2D6E3AAF1A1FBF769682
+:1047F0007CCCDFCD83F40A7FDF7DB6F8F5B78D5B27
+:104800000F98F29DE3D6CC8F35CF0DBF41759E49F1
+:104810009F4726CBE25C620F7A2C9E9F3BAAA7A7FC
+:10482000457A3917E524FB29E61E59FD7BD659E563
+:10483000621E27D94F8551BAE8A82EEEF55EDA94AC
+:10484000DA678EC4E685522CED3C5E4AED3E7EBEB4
+:104850009ECE2F90CCB27859AE3E5E89F239C178A7
+:10486000FBEA8287092EBFAEAB3D4C71EA49964EFA
+:1048700089FE9EEBDE3A95EB7BEA9AB8DC55D7C60B
+:10488000FDD6D76DE2F2BEBA103FBFB7EE31AEDF54
+:104890005DD7CEF5C773C53C132D211E6752178E09
+:1048A0001FC30F659FE03C31782E8DA886F6096FF7
+:1048B0003619DA8B3ADB0CF5BEFE4D86FE7D66843A
+:1048C0000CED6F950502538AE85CC363867ECEFCCF
+:1048D0007643FD5CFD850BDD6F654AAAE51FC8AF19
+:1048E0008302484F4867E9B5B2CA79F31AC197FD08
+:1048F0006BBD61AA6F71D998BF75BAE433CB26B18D
+:104900007E53CC3DB51D2E717EB2A1AF88A734FC7D
+:104910004CD4B76489F391C3AB447EA461A0B8972B
+:1049200044CFC36F7169F793F8C43D1A83F223FC37
+:10493000DDED20EDEFC139CB45FECC0D6ECECF378E
+:10494000D481F67D6284F31D1960F68AFBD5159932
+:10495000FF9E920542F5385F43BE5BBD85E44C3057
+:10496000D56BF6F29F960D99298F48E2899330ED29
+:104970009ADED1F2F2491F009F3BE886CFE7E27B47
+:1049800084DA2EBEB7A97F6D17E7E3B6FC42DC637D
+:10499000130FD78E5F7CC5F72A6DFDD95759C4D444
+:1049A0005BBBCFED7425C57E8FB6A52695EF5BD892
+:1049B0005A9BCBE728B6D688EF8D6510FBDDB2C8D1
+:1049C000C6E730B6D69ACD24274F2DB2305CF4F529
+:1049D000C7CFAB7FBFB94E3BD773AF76AE67AD766F
+:1049E000CEEA6EED5C4FB376CE6A8D763E76159D3F
+:1049F000EBB1133CC5B99EADB50B14ED3CAB7E2FAE
+:104A000003C35742F8F2772A56D86B1A07F4870C7B
+:104A1000196EF1DFC7665425C79DE7319EB74AF589
+:104A20000D30D49DF9C6F356C9434719CFA90E34AA
+:104A30009EEFB1798CE77A2CCE4AE3F9D058FA444C
+:104A4000609A566CAC27FC77FF7D477AD88FFF7E43
+:104A50005C37FD86F47340129D4349637ACDAC12F6
+:104A6000F499A17D0FE3864E2E53915EA874529E59
+:104A70005DA273902AD351F4FB37A5577A3ADFBF72
+:104A80000720AD4CFCF700F473087FD1ECA8A553C8
+:104A9000944FA71445E7BB7F8A723CB6AE973DC9D9
+:104AA00085FFADF2FF01C18CE32B00800000000008
+:104AB0001F8B080000000000000BB555CF4B1B41B9
+:104AC00014FEB2BBD144A35934B6865A481A520DCB
+:104AD000A4B06D37A225D2D5869283C8163C78E85B
+:104AE00021879CFAE358E86D635B904A24A9422F22
+:104AF00052C8C11E0A821EFC03621B7A8E680B52CA
+:104B000029C18AE7405B7A11D23793AC899BC47A7A
+:104B1000E940F2F266E6FDF8BEF7E6E50D68798158
+:104B200090A2DD137D40245A2A3848065468B930D3
+:104B3000305324E9A2FDB5AA94359114C0A9095CAB
+:104B40009ABA1E2F4912D9C9163BFDD4CECEEF8D8D
+:104B500031BB0126252EAF1F39000FB015B3E51666
+:104B6000FDC0C20E9DABC0EF315B0E7E96DC49A549
+:104B700032CA4D01917D69BDDE4BC02CFB49F17AF3
+:104B8000C73D0309F29F3180FC30BBF3D0CD745791
+:104B9000343BE5A33C427B4548E42F5284DC078646
+:104BA000AFAC81F6E7AFDE17258AFB6109B84CFB95
+:104BB0000BF652EC11DDDB1AEF945F28CCCFB4FD7D
+:104BC000299DCF5C1121325DB71F962855D860AB67
+:104BD0005C237EA25255A755A1CF0334E894F70C6D
+:104BE000D347EABAFB243029535ECF0FFC1B8591D3
+:104BF000BA5D805261FBB7B51ECF71376D8410AAC4
+:104C000088751C15B6EE36CB3F866FA360673821DA
+:104C100030BED43D21E7A738BD5F96BB183EB1A892
+:104C20008B25B2478C508F13CE3DDD8D73FC7D6795
+:104C3000FC7502078683CBA22173B9650C72796C6F
+:104C4000F8B83C3246B83C34142E4BC61897408A0C
+:104C5000D7B3D3061E2F63C47763C1F6F1645B59E3
+:104C60006775C78484F7ACCE432AB76BBA17253F64
+:104C70000D7C115DBC190A3D6F2799FDBB27028F82
+:104C8000B91ADDF4EAE166FBD56753E7E24E1B7320
+:104C9000BBAFECEDCF5D1D486CB6F0FBB2D6C740A4
+:104CA00096E711880B58A43CBC0EC529D3FDF4B679
+:104CB00093F7754871E49C0CDF9A0B3F4C1CD43F72
+:104CC000CB696A19829CD524997AEAD46F8F42F90C
+:104CD00034F45560FAE320AB677A223FA8138ED5EF
+:104CE0009B9FE786C92EB5232288E6BC5E6B369E65
+:104CF00097892B202982DC027F3B5C8F6BF618F2B0
+:104D0000F0B960E5DF7ADFAC3BADB4345A7BA2B4D6
+:104D1000125D898C4675D2D66D9C07A70FFC7D77F6
+:104D200040CB33BC17C80FB8433CE7238994AB9EF4
+:104D30004FBB3A997974D7FACF9B2C3B12846FF909
+:104D40001F7DD8672F3A58BD9692423CD7228FF5E7
+:104D5000DA9C5B526F39D97B44B8751EFD716B9F2D
+:104D600056F35991C83F9B4F2AF96FC1F737C67761
+:104D7000B59FF745AA6B46137CAC9FFB891B8D4200
+:104D8000F547904B116FD9A8A0E4E9FC97DAA17020
+:104D9000F796F9D0145F6DE8A36BCD73675B73551D
+:104DA000E74D1041366F7E0ECDBAF32DEA6B4A9374
+:104DB0004773EE34F358AEE24C567122DCFA3DD71D
+:104DC000EB355F1BEA488867FBE6EB797DD38E7F86
+:104DD0006B1FAC2475779EFE1FF0691FBE1B8C8F66
+:104DE000B3EFAF1D6F569E8EFF334FD6F3A23957E8
+:104DF0002E88F3A2F74CFD2FDBA790A6F00700004A
+:104E000000000000000000001F8B080000000000F0
+:104E1000000BFB51CFC0F0030977F3A0F2BFA3F161
+:104E2000D7F3A3F2CBB851F99E68FC2634FDE7D145
+:104E3000E4591820B4233BAA38B158988381410E15
+:104E400088353950C5F3A1E6D6002DE807E215AC48
+:104E500084CDFA2C05748F1C03C32920DD00C4D730
+:104E6000651918D8817C216906065F204E00E2CFC3
+:104E7000320C0CB380F43B20DE2A0DD1C707143B63
+:104E800027439EFBBB85C8D3378AA9831F28A1F27D
+:104E900067683330DCD66160D0D683F0AF20C9BB01
+:104EA00003C5666A43D831AA0C0C877419184E28BA
+:104EB00061373716287F18281FAB87DF7E572354AA
+:104EC000FE2E6B54FE4F4354FE134F547E9F372AE1
+:104ED000BFD107420300BDE0D98DD8030000000018
+:104EE00000000000000000001F8B08000000000010
+:104EF000000BCD7D0D7C15D595F8998F376FDE674A
+:104F000026C90B3C20C02404891AE8000182224EE5
+:104F100042B0C14DF181546997EA93B53622C81366
+:104F2000B1A6AE6D26DFE1AB8DE85656AD3E586DAD
+:104F3000A9D51A2D6D6957DB04D0C52D8548A9B5B3
+:104F40002DFB6F50575B16D9E816755D5AFEF79C1E
+:104F50003B93CC3C5E3EECC7CFC6ED0E77E67E9C25
+:104F60007BEE39E79EAF7B9F220640BF1CE01CFE14
+:104F7000B1E7452200CC197C462BA0542E07D8243B
+:104F8000048D70117BFE415AD91566DFC08A2F9FB0
+:104F90003ED8EE5A10A8FEF3456DF13EF6BD63EA29
+:104FA00057E350C6EA4F14A8BE53CF79DE0812402B
+:104FB000014049E76A35C1FAD934AE49C5FA1DFA4C
+:104FC000F695C0C63B53A28084E315656FDFD6001B
+:104FD000D03D0DE072D8AA16C758F998646C866C5B
+:104FE000E314D1384ED91F17A1BB14E8EF1CFBDF27
+:104FF000A62F2621C1C66D9DFAD59508B7D27D335F
+:10500000E811803BC6254167EF678248F3522A2C9E
+:10501000305959D5ADB835FDFC713A102F65D86BB4
+:10502000677C7964F0FD32072F0C1F197801B804F2
+:10503000408359DD16960340ED33FB35EDF1B5F8AD
+:10504000E8C63F7FFE7CFC19A0131E40ED8C272292
+:1050500083F06CF2F5774B0CDF5611188FB12A39BB
+:105060006C9C4A573F99E30DCC53EEF4ACFF74842B
+:10507000B380E621C8AEFE32E1996BD79BCB668E3A
+:105080004F675E390BF83823F57F25A2B800EB7720
+:10509000C6AD888B1E65CB83F7A05D5F33BDF586FB
+:1050A000C24F08F13307F163C5911E1D3A96C27ACB
+:1050B000630D9B4F8105FD522E918D096300F2F126
+:1050C0005FAC89ACE99548AF634C56977D1F1BB325
+:1050D0001A25F67EDC82B420B367041ED2DE0801F6
+:1050E0004253728E1A599CEEBB6677F431BA3D0377
+:1050F00091CECDECD92CB37E116FC723E9C71848E8
+:105100008D97A51EE963E588254353398D4B7C783F
+:10511000A77491B19991F4669BFE3B1A547AB63507
+:1051200068D0ED07686988D3F3FED097BE81FDD7BC
+:105130005B7ECDCF9E72D7ED4F61B9192081E345DB
+:1051400062BC7F9055ED310DCB6022DE2325FCF94A
+:1051500012E285C1F9558649C4CB0F6D3CE9D04DAB
+:10516000FCDA6C2CCF812CF8749EA1522F9F05F491
+:10517000206B3958F6C7F33C659F36DE531FA0906D
+:10518000F04665262AEA042E8F22722F180827C3BC
+:105190005756B960CB15499AD9DFCDE6179EA718A7
+:1051A000BB58D36D8297BFC6099C3ECA04959E31F9
+:1051B000E8DF7F0EF16288E9CD6CACE0CCE2AEEEC8
+:1051C000188EA91853D93A067D692D2F0B7F41B946
+:1051D0007CAACF81BBF8A3C78F24F5A41259C6FDC2
+:1051E000BDBD7E979F3DA222FFAB33C544BA0CE103
+:1051F000B5126CF2B05597459CF74707F7F0EB7581
+:10520000C2E6E73650A9BE8CEB553EB85E1D065B84
+:105210002FE49F72BE5E1DB2A58E66BD1E07F0E034
+:10522000253480972E8E97B28F182FCDFB5626B23D
+:10523000CCA3CD5E4F190CA394F0A0E808E7D646A6
+:105240004EB716A3DB6CF277283C4839C7E3C9B2E6
+:10525000F3F17E8DC0C75964F38983A74D865893B7
+:105260000E239E3A6B506E6D2D1145944B1F159E6B
+:105270001CB8360FC095E670957EB47049A1EE95C6
+:10528000D9F8B12D831FB720DC9CEE6A38DD891F69
+:1052900029DD397005901FF83A27F83ACB7F13EBD8
+:1052A000DC36B0CE49BECEF18F669D9DFD1C5463A9
+:1052B00025AE5B9DC6F890C1718B642937E0FE1A5C
+:1052C00012E03183D101C23F8EE999E1A697751DA5
+:1052D000E03E21C0F50D69554ED2056F9DCC749608
+:1052E00059F87EEB05C961E601695F7F9F0327E3FB
+:1052F000DFFAE38DED075C707E5188C408CE79300B
+:105300000FE17C27BC3CA71B86EEEF6483DA28FB09
+:1053100000DE6BB0DA0FF8CEFF7E8B04A96CFAE5E5
+:1053200083B65C00B54BA1F9DFCD787026E2E1824F
+:105330006A88B2F508378DC17940987D9CCFFAD93B
+:105340001D68945DF81D6A3E037875DA3175C79F54
+:10535000777EFBA1DA7D20241F11187E5B63623506
+:10536000C2A596401AD7C0BF7B59F778181ADED667
+:10537000D85F06DE21D7CDAEF74EB8A90D58BB6673
+:105380009F71506774D252201A4D300887432FCE38
+:10539000BA38781CEDBAFC6680BEB65E01A467829E
+:1053A0002ECDFCF3E9EA20D2D5C57F7DBA7AE36F32
+:1053B00097AE4E0A057FBB74A5D44BFAEBCCCE2832
+:1053C000924D2E27B5D516AD3F8ECDE492D439B38C
+:1053D0001BE525C4997DC68701919515CDE47A2FEB
+:1053E0001880FAAB5AE29593BE42AF9C8CAF34BBA7
+:1053F0009D7E37EB38AE42E3A27984E3CA61E80EC2
+:1054000044B1AC503F48CEE7A6303CC18335C5BC63
+:105410009D81ED869A8F8CEDD878A87E9C2BC276E4
+:105420007F9F93C862F70ECEDF3B4E7C452227114B
+:10543000197D7D08CBFA1B2EBC0FDD4E86371CBCB8
+:1054400030FA2F453F49C120FECDDDB791FF220044
+:10545000A241765D619B855FDBF1FFCDC77D9FF348
+:10546000757BE12C0DF52D60FB0DBEB784CF039647
+:105470003F1074E25B673C299C00A21BBBDE48EB3B
+:105480007F27F25316FE5E25727DE3BD2FA5FE1B1E
+:10549000ED416BB3A03FC6F07AB8E17D788DF1E5C0
+:1054A000EAEE0B15F47B5C2F8EA17AAB1714298BD7
+:1054B0005CFDAC066E1702F4C9CB22EE711BB91E5F
+:1054C000DA25EDC379BF5A21A571FF7BB5E27F488C
+:1054D0003F7FD594D288E4573BAECE194EEE1C6E7A
+:1054E000E0F6AC53EFB029D1FE7E58EE0B67D3E364
+:1054F00007C74FD3F8575548DE7D5AEE9371FDDF4D
+:10550000FB22F8507F3EDCA00AAF4D65C62FCE933C
+:10551000D1D1EA8A2205FD0E23CD6B89ED0773F008
+:10552000EBCCB3252CD23C5BC255E4B76AD1DE216B
+:10553000FBF10C7B8FF26028781DBF558BB63C2B9E
+:105540003E9408D7B7145F32BBBD69CFD72967FA3D
+:10555000B31CF8DAC2DC2E6A0B73B8DA62621AF98D
+:10556000BF2D9E7D5CE7D96CC3E7D46B8971BDB458
+:1055700085C993D1C02387BDF030B41D457FC94490
+:105580005BD6E4D7F6367E0EEDEC64D8940C7CD373
+:105590002B4C62E5097109366B6CDC9AAA8E6AC6DF
+:1055A0000279AB122F3230602C7456A21F70F217A2
+:1055B00037F67C8DCD6BC27CBF86EDF26A523DCF53
+:1055C000B176E399989358BBB1C7D7AD4339FB4F38
+:1055D0006827A220B66E6A443F560B0E7109C0C3FD
+:1055E000E2AA4AF4B3C9C0E502937ABA3C06FD3395
+:1055F00040CE99A1E403FB13CEF907DB0D85B788F4
+:105600002DAF68DE24AF960F2FAF36F2FE2DF61FBA
+:10561000CA9B0983E351FB71758A078F6333BE1FF1
+:10562000B0E9D20FCBFEAAE38C87E501D44F222B41
+:10563000442D8DF5A12B17FD5063D6CAD08DDFCB3D
+:105640003B1B99F81811EF4CEED570BF715258E61C
+:1056500082F79722F7334DBAEB9820A0DFD7602A64
+:10566000FD4C2CD7CFCC46A7DB6DFA1C28D7AC1647
+:1056700092345E62C954946BB522D9BDFFB46256B0
+:10568000AEBBFDFBF63883EB0FBA3C17CB7CFDE5D8
+:1056900015A21998F1A7AFBFFC21D73F7FA3E2D98C
+:1056A0004F3FECBAC8687B148CBCFE7FEE38CEBA94
+:1056B0009DCF1F5C3E4EBAAB3A80F2EFBEC4F07293
+:1056C000E5FC755B4EEB36660598E92C72252009E2
+:1056D0009E7DD579AA900283ADB3744C22F9268DB4
+:1056E0009DBB72270C3DAE145332EC37BB3FCBDC75
+:1056F0005FC2D6FF13E0FCF5CA28876A510EA15C91
+:105700002AF7BDEEF68F308C0F9619EEDFFAC2FE47
+:1057100003288F2C268FD07F9AF9BD16CB2E7AB80E
+:1057200042E2FBEFBEEFFEE202818D73C4F0EB7E3E
+:10573000F6EA90D0FB06F97D2B25DA8F113E752E07
+:10574000B607524E8E989259CDEAF7960BB48FFA5F
+:10575000E1A5EBFE91DA8728DED1BBE0B52F5FCA69
+:10576000DA7FE2321F720EC704B68FB37FA25E7378
+:10577000B6EFCB97B2FA872ECB1F56DFAAC5F9BA80
+:10578000E8E4AA67BDE555486F08FF7FBC59FB20D8
+:105790001BEF08E424FCF8ACE0F01D41F890EEFBB0
+:1057A0007EF506EA85874D81FC51472A7E16437BAC
+:1057B000BCD214485F5CBA4048FBB3CC73E982DBCF
+:1057C000264F62FD258C901660DF0F55BEBDF55249
+:1057D00006EF553F90B6E1F3F45EA920593634BC8C
+:1057E000CEFBAB4CEFFB01BD189216E21D341E97A9
+:1057F000F0C58CB89B5E07F418396166F3B7AD95B8
+:10580000B8FF51D00CD2EFE4B002388FA1EADF34F8
+:1058100004FDE6407FB7847038FAF7D9AB75B73C22
+:1058200074E050E44412C791340576A19E917B8DBB
+:10583000EE9E7F83C4E34242DC2478148DC3A3C868
+:105840008699CDDF546FC3E3F403D069B7EF87BE09
+:10585000F0207CAD81C44AF45B58B9DC7FD812F1EA
+:10586000FA03F7D8FD3CE6F4E783AC71158026EA2D
+:10587000BF6A4C858AFD3757703D490783FCE32D8D
+:10588000CC6E8461F4BAADB6BCD88CF10D3FC6398C
+:10589000343BCE11E7FA53F819F2939D2913C9AEA0
+:1058A00019AA9F88E1D54742A55E3BC6D15F027A1F
+:1058B0005E861FC8EBF7F18D914547EF437A1D09CE
+:1058C000FE013DCFAED72EA7542D2B9ED2C3EA7337
+:1058D0007F3DFCF1F6215F97960DAEBF14DE1CBA3A
+:1058E000CAEC5FC95752698ADB25E21E7DC09693D8
+:1058F0004ABE9AC27D01D4A1BE0779FB30FB8EF16E
+:105900008C7042477F8A043C2EA4221FB8F0F3B665
+:10591000DDEED3B268EBF3298A830A7A8AFC766AD1
+:1059200021E31FE1FC76CEB3CF6EDFFE87DB5F2184
+:10593000FE2850893F049DF14F96719A24F394C438
+:105940009EB74AE65BF8F4FD514A66E393FFB2E581
+:105950008A5A9BD0D5628A2B923D92094740E6FD38
+:10596000DEE4C06FA5284E395AF8DF1F25FCCE387B
+:105970000C7E592E20F87DF81C0A7EC986270FF46C
+:105980004619E59ACEE52BC032DDAD97DC28737958
+:105990009167CB2780DBE26E7BEB7ABB9FD1CE2772
+:1059A0004F1EDD7C9C71D97C26C97C3D26CBC3ACC7
+:1059B000C7441B8E1B65BEDFA9D5093DCED6257712
+:1059C00008BA5A60C39192455BAFB8ED43D1D5C5D3
+:1059D000A39CC782C1759967AF4BC570F3986BCF15
+:1059E000A35382F9AFA35E3CC5F1F72CF7ACCB1DF6
+:1059F000367E3AFDCEBA6CF0ACCB2DF6BC463B9F62
+:105A0000C5767F23CDE78EC1755966CF67F970F3F0
+:105A100071D5BFD6AEBFD2AE4F76C71D726913DA4D
+:105A2000194D5262955C30381EABF71977BDB79BA4
+:105A3000CF34DAF56EC0F7420DDFFF58BDD5EE7AF0
+:105A400060459BD03FD08AB602B3634A5A2EA9B2B2
+:105A5000DBD551BBDA81FE6FB6F983DA055A8426AD
+:105A60002B4CF5D661BDC6457F74EADDEA85F76249
+:105A700007DE0D046FF5001CB7BBEB2D9027507FA0
+:105A8000E7C51D46E90FF2C5921D18E7CF834827E9
+:105A9000E679B4C9A947300FC0B264780CF309FCA9
+:105AA00086803EB66845EA1B582FD762F635AE5B56
+:105AB00055EA292C5B22249ACB299F80F205EA65BE
+:105AC00055F31B987F61C00E56D662721AEDF356DD
+:105AD0002169E1BEF85329F96599E4ABB6AA11FB37
+:105AE000CFD7B99E0E7DB46F3970DD13BA8EF21F19
+:105AF00072195CE88F6ACD80EBFED0A41EDC6FEFDC
+:105B00002D50484F66065629CA973BA5A081FDF542
+:105B1000147C9EE0DDDEC8F31BB67FE2F304EF7D6C
+:105B20000250DCF63E1FCF6FB8C7A76A4D1AF617B2
+:105B30001DF759CA87C8D1FCE5361C08DFDF1513ED
+:105B40007CF9A055DE2890F8EA41FBB6B542217DEC
+:105B5000797B6C5625F557A1929E7A5F625623E9B0
+:105B60001D1541F2D1E7870DB25BA3F314B0B01C51
+:105B7000331A51CF8CCC0D620E0CE417022617405D
+:105B8000641AA4B1EC83CECE12F68C7630BB249F7F
+:105B9000EC26B811EDDE0A8677B4232CF328DA253B
+:105BA00061B0FFA44326CEDB374102F47B38EB1B08
+:105BB000ED1C683FACDD154D8FB25EF7E8EA453A63
+:105BC00098DD3F7B14F53A47592F3DCA7ADDBCDE9C
+:105BD00088FE0E83DB7B2AFB0FEDB640A6DD1CF6AC
+:105BE000DAC3BE8CEF99F1B8CC67663CE4A4EC8DC7
+:105BF000878CD4DE89838C345F744A0CC0298D5C19
+:105C0000DFD13787FAAE8CBF266EB2F6ADE33E1D0C
+:105C100027B9366E157F4EB4DF4F5C69973F6D979D
+:105C200057AD34B3C8F7B13E2E874BD11F329CDF3E
+:105C300001B8FEF80683FD9C80C94BC3FB4F32F5CB
+:105C4000DE4C79A7CA5615F2EBF604F76BFA9119F8
+:105C5000910F0B81FCB03E487596A09C0033BA783A
+:105C6000CC20FFF8CC174CE4E7C3E324102A687D6E
+:105C70000CF2A767D049265DF833FC397F2E9D7C56
+:105C8000CCE78DC7FEA5E844E99046C53F4AE72822
+:105C9000EBA54759AF7B74F5FC1DC2E8EA758EB2DF
+:105CA0005E7A94F5BA79BDB6F90ADFCFE17B4D662D
+:105CB0000983FB12D5536EBB24E8FD7E69D8536E71
+:105CC0009FA3D0FEEF94FD73554FB99DC979CFF7CF
+:105CD00079612A6F6AEDAE625BD9A8F9E43FFF44AF
+:105CE0003E295547F04B578819765B065FA97A0025
+:105CF000DBE7CB3A60FE547E8CEF53EC69A6B3E051
+:105D0000F7119BFF77C93C7F73BBAC07D07EFC5B70
+:105D10009F67A38FC3EBCC7724781DF9FBA664EBB8
+:105D20005B43E57D54F3BC4C1982949759526D56F0
+:105D3000994C2EC92FF2385866BFD729C9A77D2E96
+:105D40007B58D6923CBE67F7B7A44026BD44667226
+:105D50000DF51E05123545144714C9DF278747D8AE
+:105D6000370A5D72AB7818B8ED3C56FAA40354FEBE
+:105D7000968F1B3480E46B04FAC898CE41AD670A55
+:105D8000EA69BA00D4DE10B8FF7C8186FB5E2CF095
+:105D900097EE7715F52B98F7C0B9D087E857EE2323
+:105DA0007FE75FBCDF11E00D607EEFC5144288B96C
+:105DB000F37B7DF114BD84B3E7CE49738137A1BF76
+:105DC00024C5D765D1207F288C8F925DD61ADBA0A1
+:105DD000BAD7F5FF7CC51EBF89A2B5DD2644D9B36D
+:105DE00070ADD9370C9D9FC3600CFA470A6F34FB26
+:105DF00086D94F07E29918AFCFC2076D4A328DFAA4
+:105E0000BB3529CCED7939457EC676216FD6E67251
+:105E100017FD162ADD0857A4DCB4D0DE6BCF170DB2
+:105E2000D45365D8DA2BCC60EDA45A2399458F184A
+:105E30006C2F9F74CF27A678F5A9E611E8BD7504ED
+:105E4000BDC7A718C96CFED0690AB76B7DC1ECDF6E
+:105E5000EF12AB4A9439E7E38DA9F9DCBECD850E8C
+:105E6000E1639C7C28DFA1F08557100FAD0557C476
+:105E7000879B2F68DEBCCB9B4473A6323C1C73B25D
+:105E8000C131DA7C10ADDA203A1CD097629CAE5159
+:105E90004F12C660BE07FFDB56BEAB1BF3407C371C
+:105EA000F0B8AC64EE06F4533B7A9364064F88B4C2
+:105EB0009E0BB8FE54CAF52193FD87F3882E185E19
+:105EC000AF9632CACB14AF3ED4DCB017303EEFC031
+:105ED000EFF8F132E7758958756D767C8CCE1EBE71
+:105EE0008FD10B4CC378948A4881CE068DCA5F6EE1
+:105EF0008853796B834ECF9686527A6EC1A6F39102
+:105F0000CF531D450C6F1DF147E39F6555EE43D9F7
+:105F100041FBFE758B504FDE3C50666620837B3321
+:105F200006BC991E71BB72D522B4DF3707C0F62BB1
+:105F30002C5A647ACAD7345762D9F6336C6EBB9E3A
+:105F4000EADF3711EC7310A6FA49D7BEF788E223CF
+:105F5000FEC6BD85B7379BB1BF806C97E1B645DE05
+:105F60003298084F40E5E5FDCA06EA9F44001BEF62
+:105F700027CAED7CBCA9DC8F0F65CB47C023F7EBAC
+:105F800083A273F9599647F92C8A61A0FB15EECBD1
+:105F9000B5E11E6D3F7292EF77C7B2EF97837C3306
+:105FA000C2BE66C331D2FA3374D87E88245838EE24
+:105FB000CF791CF1AF3DEE7DBE0F8717A5A2DFC2E2
+:105FC000F3230B94E4F791DE23665777112B476B8D
+:105FD000BB2D62DF518E7BAFA2D9F34E12FF3B780F
+:105FE00076F48EFFF279D7D11733290F2910E6FC0A
+:105FF000375A78FB50BF9A33D80F3C51356E387DF5
+:10600000AD2021A21236202FF26B82688C0D947382
+:10601000CD3C4F39A762BCA77EC428F67CF7691730
+:1060200079BEFFA9EBF4F38C79FCBBAD373AE51FE1
+:1060300067CE7394FD3AE59EBE4562295B87976BF8
+:1060400025D2EF5EAE7DEDBED9584E4814BF3DB3AC
+:10605000B2D9878C740CCCC81CF4872525DB9F6EC5
+:106060004E447CFE1CFFC9C67B09F73D269F8ED897
+:10607000E77F989C9888E79F8E5C366F22AEEB1185
+:106080001FE76FB03A493EFDCC071E79F0335BFE47
+:1060900018ED3B9AD10F794CE065A97DC7228BE2C0
+:1060A000835BDB3ECEF496AB390A6179AD90D51EA9
+:1060B00088F815C2C7074232E267F334ABF5D61849
+:1060C000E6BFE940FAAA1F12A497D5835529A2BEBC
+:1060D000C3E88FE2DC727F6136BDE367F67EEE8750
+:1060E000AB49DF5F5E9BEB4363DE5F33D3877ED4D8
+:1060F000AB6B2A7D60EBCB9A0B3E3121D0F9A91511
+:10610000B5FE5D88D715B2E9CB16D7BA3AE1F7EC00
+:106110005333190E11FE63F6B90780FE4277BC694E
+:10612000A69FDB3BF192E1ED05076EA7BCAC76E6DE
+:10613000F38807866D3A8F026A7FE1751177BF2178
+:10614000272E1CC17E5F5EF90F7C7F6674817EC541
+:10615000174F7CCE4771D915F91EFE5B5E2D79E095
+:106160004F2C0879CAD7D45E9D33ACFE91F467C832
+:1061700033CB3E8729921CDE7C5C20F99033A93F0B
+:106180008D799AF0B2045CFF73FCAF9790FF353ABB
+:10619000A15F477D017E13D21E73C9CF169B2E8748
+:1061A0001AFF393FD76BE5BC1A8A6FBF7742D071AF
+:1061B000BE425EFD349CAFAC984D386E4B9198C694
+:1061C000B8F79DC5DB555CEF4D251F4E0FF4C57824
+:1061D000BC5FB7B459C8FE43B54B9BFC1C41E6FB02
+:1061E000B57E1E6F69B5966B25B88C07B44A9C7F47
+:1061F000A010B29E3365F4BFD68F7EFB98053CBEDF
+:106200009E20BDBA445D4D79B8F2F8E1E3B59978C6
+:1062100093ED386066BD276D7A2CA9D845FDBE7711
+:10622000E1F0FD3A7879DF10A1D7D627B0BE0A6C2D
+:106230003E0CFF5B4A791E6E4BD9338467C9AC2490
+:106240007DD6A7A54CACB7A56C35D1652BAB93CF4C
+:1062500086CEADEEA2739A5BFEC0E3134FB61F6805
+:1062600046FD614BCFCD807995C1781A507E6C99EF
+:106270007E938A78D8B213A017E958EE22A75CC89B
+:10628000F687873448334B0A426526A05CC8D3F8AA
+:1062900099CA7DF12AC075DB520E06B2667E3AD5E8
+:1062A00088A19F2D711EFF0E969A354508F73891EB
+:1062B000C4800EC90E2CB7D4CA348F368DE303EDDB
+:1062C000AE734E7E17E6C19470BBAB04FDFBAC7F92
+:1062D000E58B7CDEFA8E12F2136DC97DD9447DD731
+:1062E000FA04185381EBB5A427C88C8EB0FF7A2D21
+:1062F000EBBA6F1593DFF2BBE2F7B2A60B48A79992
+:10630000F879CF0757E2BC5B668AB02B8BBEB1D75A
+:10631000CFE3756963F955C559C679CEAF7BF204F1
+:10632000F4F715827BA8FA83F564F2EBA3E1B1845C
+:10633000CDA3A086FB4B21E31C6B0C9264DF8E0582
+:10634000AB11F9D139BF3AA13AF1CB247B4A91156F
+:10635000944F37D4795627CF7375852D9041BFF66A
+:10636000D76CBE371FF401E2EDF2B38FBC80F95257
+:10637000BE0ABF46F955D0F902E66FDEC8D4312C0B
+:10638000DF7C7CBA82F93F2F8F97303706F9278A56
+:1063900074F81688947FF6161C8DCE76D1F9297B79
+:1063A000DF41C98A72A43997CF4B0EB7F54A515CC9
+:1063B00077D9EA73F2F74861E279ED1066EF55CAD2
+:1063C0003E6A24F9D7C1F3859CFCC8CF767AF3875F
+:1063D0003EB7C35BBE09968F41BEB989297469D6A1
+:1063E000EFCDEEBC2F36FE313FD70F3E07A936DC8E
+:1063F0007FDAEDFC9875DF9FAE205DDF3C5B2BC242
+:106400007318CE3C7EEFE776E849C6A7BA8BFFD774
+:10641000C4D2949F9C39BFB7F62CEA4EB2F26BBA45
+:106420009CE276B6779EEDBEDEA598EF656DF3D95A
+:106430007A8337CF71CDEE4A13F3C518F6F47C6F2B
+:106440007B82FF1F3ABCF31D091F99F377F4C1A1AA
+:10645000E6A3EC16B2E6FB85546FBE54B3CAE38DD7
+:1064600066B30C8185E79F8FB6AA5274BED96AF2D3
+:106470006BCD318A4F52FCAF9E110EC6F7CA559DA7
+:10648000FA792F30290D740E21350FF5A33FB7DFB0
+:10649000F92AE7C3BF74BF0B8780779DDAA7207FF7
+:1064A000AE973B6B84E2C1F301019F654E60F8F645
+:1064B000EF5DD63D013CF53A4659EF201E811E4561
+:1064C000BD1A7198FE4EDBFBD6BF3DF12F0AEEDF01
+:1064D0006F3D7E6229CAB95BFE550295D53BFD44EE
+:1064E00004BA69DF492B2897D7EC9168FD41EE9EED
+:1064F0007BB527DFBE99E67FCB5311DA1FD63CE38D
+:106500004FD7B2F66BBEF7DA0C607C7BBAA9FF8579
+:106510000988BFC7059EC760F5CDB89ABD5F23C384
+:10652000F5D9F2106E50395F9DFA416825EEEFC241
+:10653000EE9EEBA8DFAE6B7D7E97FC5DA9727B9A29
+:10654000D533F1BBF54D213D55E0F065CBCB3BF5A7
+:106550004DEE4759B3D797C63CC535BB772A495648
+:106560006FFDEEB789BE173DF56414F1B07EAFF74D
+:106570003CC22D4FFDA1ED92723AEFD45F8BF24FEA
+:106580003A4BE533A6DACFF3E0B93FE656E2585688
+:10659000EF3B6F5EF16BF6FD645C82001329277B95
+:1065A000FF53F9572C27C32926CA58FFBE57DD7C55
+:1065B000B87EF76B74EE481399027B299E87C8F862
+:1065C0009E519FE9B90ACAC3F55D9BDE4679B97E43
+:1065D000CF5BBF42BA5B0FF2AB6E7E3E89FF18778E
+:1065E0007E3C6B93EAF5D39D814373C901B03B3F79
+:1065F000ABBDE8C4B31CFEBEE5C9330FA31E71EAF0
+:1066000099FF7A18EF6758FBC7FF7918F35AE147EB
+:10661000010DE5D6FAC77F1E0517FE1FB5E5C3E9D4
+:106620006F7EE3EB0F303C9CFEA59FB076FAB93746
+:1066300027E13D1DA79FFEDF31A87F6C7C6EF158DE
+:10664000A4B38DDF5D3476B873A048B769BF7B7D96
+:10665000D3FC7E83BD026E8200CFDACF8C7581437E
+:10666000FD0AEABDEF0AD0BF3997BDEFFA8382FA7F
+:10667000CB0B26F4239EF6EF79ED85BB58F92DB6AA
+:106680004EFE2CEBC4E63F41A4FD8DB10F7BDEBA7C
+:10669000E7EAAB2E2BC7A7CFC0EED7433FED1BE7F2
+:1066A000ADEF31B6BEE583EB9BF9FD0C9C5510FFB9
+:1066B000EB9F60EB3903D795ADE78CF3D7F32DFC57
+:1066C000C7FCF3D773BFEAF5C79D81B58F3C801F28
+:1066D000F7E467B56F9DF55CF7DD4F0EAB973BF2C6
+:1066E00061243CD3F95E06D75754F3672AF2ED33A1
+:1066F000DFFAFA0331BECEB50C31A79F3C33090F48
+:106700006BFCD6D77F1DE2A1FF39BF867AD49AE70A
+:106710007E417C77FABB2FD1B91EF61715D87E774C
+:106720001A06FE8E022BDF2AF0C23ABDFF8A5FB145
+:106730007ED7B12E2C83D6EF8A5F95E3FAA9FDB4FC
+:106740001EE965353ACADF7401CDFBD634E78F5BAD
+:10675000D33D2BD09F9D89F748C0C9271C5C57F4B7
+:1067600097DEBAE7C415487F43ADA7337F0DE73FF7
+:106770008F7D7FD4CBBF43F2ABBDBEA777BEA7A0B2
+:106780007ED5FDAF8A26323BFFB4AF5F198FFBCDBC
+:10679000D39286E78D33D77D10FF4D59CF1D673ECD
+:1067A00033E9C31FC81EBF76F03412BF8F3CBF0F42
+:1067B00087BF33F63E9C89C75367B3EF075302DCAC
+:1067C0009EBB153A6B50C5CCDCCF7C90B226140D25
+:1067D000C2DBD625919C3FB59BFB6932E5C5AD4335
+:1067E000D867339D71F6F6CC40B9766ADF0F6CBA84
+:1067F000E4747FEB132714CBDE1FD22EFCAE1FC236
+:10680000DF7DA9DDDFFA67B3F7B7FE89B7B3F677A7
+:106810005236AF45F84FF6FA282FE9649794D5CE53
+:106820009D1AF079F4AEB6C8DC5772583B291AA409
+:10683000BCABE626F317E827B58EFA6C3F80F15B18
+:10684000CCB76A8E04E99C7B73F426BA2FC9E9AFF2
+:1068500025034F723C41F6931C4B94F31858DA63AE
+:10686000C7F81841B8E106D92A44BDFF70D19B3260
+:10687000F67B04F548975D7F4486D6FC723C172171
+:10688000188D90C5BF91D17F628104BADB4FD83D8E
+:106890004EFC3D6BEF3F26A511B5F590EAA67301BE
+:1068A00085D0F55896FE1E6AD0C97E2E4A5C4FFEF2
+:1068B0001F7F2A65A2BE56B8512B16F5A1C79D9819
+:1068C000F2C6AFC733CAFF3D8E73D047FA20EC7EC5
+:1068D000FCF1C7C7F02D05F5F217F0C9E4DFE57547
+:1068E0007A21961FB2E7CD7880CE314EB41232CAEB
+:1068F0003921B64C46FD62712A21AF76ADE7E298A8
+:10690000301EF7D3F410F7407D3FC0F7CFC6C66BFB
+:10691000288FFDC12F8A44D70F063E5E887C7620E3
+:10692000775E18FD6B3DEBE61E9AC6E09C10960064
+:106930004DCEFDE1E1CF6D3E6CFB1776D9F70F3DF3
+:106940006AE7977FDDC6DBEE86527A3EDE60D0F7DF
+:10695000271A2AA8DCD55043CF671A12F43E7A577B
+:106960003089F4B9A76125BD9F006F0BB8FEDF6BBE
+:106970004852F9D1402EC13FF96E1093ECFD62C42C
+:10698000477870DE0E3C69DBEEFE7EE0C72DC8174F
+:106990000378CCC0F7E5D02BA8E8BF8A093AAE7BD4
+:1069A0007D40E779AE19F89DE4EF17302E577F3719
+:1069B000CF877858F09E77B8DF96FFDFB1F9F4DD26
+:1069C00068F2C9007BBE53B3A294F421D0CA906E82
+:1069D0001E1612478C22C2B3E7DCC9FABCE4770268
+:1069E0002EFFF0A40E6ED7EF08D8F26D2388486F03
+:1069F0001353A023BD39F3DE57A917A25CDC270887
+:106A0000B4DE486FA52E7A1BA0DF809D971CCFBEF9
+:106A10008F0FD22FE7FFF825A5F754235E3688E4C1
+:106A20000769C64FAE761FD874C4EC16D1427AAE51
+:106A300013C99F3BF9F8096112834FD7BE15C07B7C
+:106A4000BBE293C0F637750590BE1EACE3FEC5AF42
+:106A50001DE7E798CE6C2C5E368DD55FCAF083C1FA
+:106A6000A8BC25251EBFA5737EE16B6A22471BC605
+:106A7000BF9599F776FFE42FBD9FC3C699703CA4DC
+:106A8000E379987B26FFA84761E5F17D02F993C67B
+:106A90008753D3703D2BFFDF37C7F5B9D6E181753A
+:106AA000A9C9A837B64DFEB6807C30FEEC8F05DC58
+:106AB000474AB4E49BB83E1364FB9CB09C9A87762B
+:106AC000C1F57989DFE1FB4461FA53484F676A36C3
+:106AD000FE1BF6EFC421EBEBF5DC692EF990799EF5
+:106AE000E2A1D4F0FE4C67FE0FE1FC87A9E7CCDF02
+:106AF00059BF3335B1B5281733F199D96FDE9215E7
+:106B0000C38EFF907D8F189BBF3FE8926B85A93E97
+:106B100019DB39ED878ABB66CE77C04F34CA386D32
+:106B2000970FF2912E9EFEBF49DF3902483A0909BC
+:106B3000FD53FB02C97108CF5C4851994947CA67A8
+:106B4000377239FF3E30E6EBE388EFE47411E57D00
+:106B50008C72BC5648242A719F334423DB3E303D5F
+:106B6000C8E97E01A4C83F2A86EE1E3ECE5FE88DAE
+:106B7000F36F059A0458DDAA1DFF0059437FD841E1
+:106B800098857EC8FC20E7F74A99DB97B30FEA3B6C
+:106B900025EEB79296455CF8B3FD763EDE3583FB75
+:106BA0006ED0743CF735B34770F1EB7BA1E4C220A3
+:106BB000ABAFC4B93FD2174BD279CBC55258247F63
+:106BC0006E2797FFF590502FE47119C079EB1017DD
+:106BD00071BF7F68233FDFAE6B2182FBA1984EE53A
+:106BE0007A5B4FF9B14D473FB0E5FEF76D7AF92E6C
+:106BF000CA7DA49B3EF3400E83EB3BB6FC7FDA9646
+:106C0000FF4FD9F27FCEB13EF86639C96303F39ED8
+:106C1000BFBC3DDE84D37CB2C1A47ABB1AEAE8B91A
+:106C20003F77ACB897D57B74A3B80BF9F9516DECED
+:106C30009578DF55DA140D81357EC8DABE28CAE0B2
+:106C4000DFA90A143F7BB82145ED76AA7A938AF131
+:106C500014662D5B4806F5BD14F6A8FC6DBF56C33F
+:106C6000EA7DAD33EF4A8CC3DD5B23533B878FF462
+:106C7000391BB03944F3FC4164ABBC826E750ADA4F
+:106C8000E91B45EAE72B81CFA88BD873E2C4A3EABE
+:106C9000C7755C8C13668A7D5FC4908CF3A8E8EBA3
+:106CA000B3B05CF27A98F2B5E7BED2074FB3725137
+:106CB0005D84CA132D2F5F4CDFD367753238269E53
+:106CC000E2DFABF37E6775B1FA391BA2D45FD5EB77
+:106CD0007D02D2B3AFDC7BFE6A87EF97FB236CFCAF
+:106CE000D8A1848078DB27688B3025C4FA143F7FD5
+:106CF00033F62054E1FB787409ADC3F66011D1CFAF
+:106D0000D75A8EC66F463C6D8CB5A099B37FE3060B
+:106D10003A9FE0DFB891EB4129EEFF9E78C701E191
+:106D2000732EF950D82267F5DB6D0FFA799C64E376
+:106D30008AC4340EDE8130EA7B25DC5F59D45AEDFB
+:106D4000C96B72E2231F08C9ED41B29B789C44D6FF
+:106D500052F4FE32097545F6FA4E91EB4989DE8010
+:106D6000DB0FA3DFC1EF67CB8463575026385AACE3
+:106D7000EA3A9417DBE6287200E19866DFCF62C733
+:106D80002107F63121B9CB2DD7648DC33591A132BE
+:106D9000847077F77EAA8BF5F37ECAD9C7CC20E939
+:106DA00049F788C41F5BCBF939C0FDC63BDD78CFFE
+:106DB00085C34FAD8648FCBB5D16D202EB677B797D
+:106DC00071EE85483F31DCBD69BE2AE2B944F6F177
+:106DD0001C0E30F7A15FDC8F7E71B6DE25C743271E
+:106DE00044F2FF79F3BF8B2CEFFA8BF5DE73771348
+:106DF00099D2E3CE57064634037446FB6BF5BEFFCB
+:106E0000407E5819223A03CB8C568EC1F445FB4F75
+:106E1000AAA5F3CF2519E70C1EB0EDF787ED738413
+:106E200070F63640B9F5807DFEFA81B5625067781C
+:106E300079DE3A4AFBE6C4FAEE4A0ACC687E4F7E17
+:106E4000B5FF6EAD09F7D7A294374FA832232FA80C
+:106E5000E4CFCCB33E1EF4DAA9FB4E060DBC0F2FD7
+:106E60007D4C32509FFDF25DB349FE596BB8DE9206
+:106E7000AECB7B00CFBBE40B60E07BA75FC77E7D22
+:106E80002798477C939ECFBEE730B912E95A5287C4
+:106E9000EB05395A530CCF43DF09DFC6FEEBF8FA96
+:106EA000571602DDAF5318033AE7CC9E9B2F40FEE6
+:106EB000DF28624C1CCEA19C4739AEF6BE88EF732A
+:106EC000AF14E9FE9CA216EB429CE7BE4BC68F476F
+:106ED000FAD81AE6E75E9A851468086F01E7879D7D
+:106EE000916ECA07DD562342135214C3A581FDAC2F
+:106EF0000EEEA23C1684770ED11DE95D18A3407EEC
+:106F0000B46E08F27DE7AC7521FA95A3A1BEAEFD83
+:106F1000AC9F70BB62EC62FDECACF4DE533735C461
+:106F2000F7BB404870E2FB81107B9A5B81F216D977
+:106F30005C88BF195F5940FB8246769513DF8FEE60
+:106F40005B22164DE7CF6217FFEEB2E56CDACE5B3F
+:106F500078D8DE3F1C7DE301DB6ED86AEF1B45E687
+:106F6000554D0AD26D1DCC443C95ACED125667B31D
+:106F7000EF3BBC7235935F2667F24BCA7B4E75427E
+:106F80005DB1E77BC4B8C8F39D4231B8EE6CFF46F3
+:106F90003CB707CA24D4FB6643C274CB95A1F6FF65
+:106FA000FCA03923F421F49F68289142FD3353FF5C
+:106FB000BED45E97EB0289F9B81ED14B56521ECF54
+:106FC000BA40E252EA5F4E0B284F1760BB58567822
+:106FD00029F96B14F0567F18784136E83CD79D921A
+:106FE000739FADF73C1764DC5F9B793FEDC2FFBB3D
+:106FF0009BEEA76D1598A287E51CFB7E5A3FBF9FAD
+:10700000B635C2EDAE563B8FEA561B0FD787F87DDB
+:10701000AF6B6D3A5D18CA7EFF91E3F74AA16CC071
+:107020007A63B3DF3B861A15F6B77042F6EFA91004
+:107030008F3B2E9C3CFC381B701CD6CFDCA0B92E9D
+:10704000E4F2AFCC0E99EBDDE5DB43767E919C203C
+:10705000BDD294F97E5814343786E6B8F06B3FF30E
+:107060009694D379BE33F6793ED66E87407895B440
+:10707000D1E0DDD1FF5B05FD1E92833F677A5F960D
+:10708000F5782F18B5C49CC17894A31FED0E717BC1
+:1070900092D1DB263E8F34E5418741BF07EF8198CF
+:1070A00080F770EBE85738FEF0BFA0BCBDACB70668
+:1070B000F5A7753F94E87EBBF3F0B596D19D2B1FE5
+:1070C000C5793FFEFD0964074F9692F7875CF6F19C
+:1070D000F8BA7E05E91DE1AFE6F0F3FC69217D21F8
+:1070E000B70780E238AD37C73DF98499F6481EDE10
+:1070F0007340724521BD2E132EC79E70CA99E711A9
+:107100000EDB74847FFA18BC271CB8322B9B12F25A
+:10711000D71C48D2731EE8F464764B17CE83F19FD8
+:107120008E703685265D8AF3F82BE2ED47A1397F14
+:107130007B7873E8B82879F9001D67BBFFFAFE5029
+:1071400094E46DFDF108E9FDD17D5F20BA96185DEC
+:10715000076283F932F560E7D187A10BF5DEA264FF
+:10716000039D0B3DC3E818FB95347E8E55062D819B
+:10717000711B29C6F9C327976AA2867159CB8F79EB
+:1071800007563118286BD11FE986B73C9C7CD38DFC
+:10719000C73B8FDF43F2F6BA40F224AEE79D259657
+:1071A0001F353B971C3EE596C3028475E4BF856797
+:1071B000F97E5999D465A487458CD311EF8B214969
+:1071C000E58F8345CF2590A6E7DFE19546A4C7D993
+:1071D000E716BAAF15DDE71606F2B9CB9D7C0E1E99
+:1071E000A72AB0E9106C3BF5F995CB1B17B3F1D981
+:1071F000E29B188FFAEA4A9ECFE39F27D3F9D58204
+:10720000BE1B6A314E042BB85EE6E441E4D57AF544
+:10721000B4F3EEB73AFEBBE3D82EF39C9CA3AF6564
+:10722000EE5BCE33535FCB0B673F3F39D4BE931930
+:1072300057A8C77F72FBD5B6AB1339EE7BE3339FFC
+:10724000871BFA5B0EB8F2CC8FE0FD4659F7011EA2
+:10725000EF8DEEFB5DED8A72BA5FCEC094C9DE861B
+:10726000EE85AF4F1DB483130B729F477F74A23A14
+:107270007796C4F0BE34FE6ECB817C806566CFC24B
+:10728000D75DF3ECD518B459F48481F14CDF07EEE7
+:10729000FDF72D85CB97567BBC881D1F6B172D3FA7
+:1072A000F1ABED7FFB7D21B7D31DFB3EDB7C5B08A3
+:1072B0005F7D61A487A1E6FB0F61BE9F8E5969D0F7
+:1072C0007DF9CDF67DF9CD139DFC2D43437DF2A6CE
+:1072D000702EBFAF205C42F1D5E69EF9E44F2E3808
+:1072E000E4237FFA981549C172ED8BF73670FFEBF6
+:1072F00057987E87F9205B985E87E57D957355B436
+:10730000176E8FCCA278EDE606C3932FE23CF13ED8
+:10731000BAA4CBBFD79CA8D230DEDB523B4B45BBD7
+:1073200043FA443995E50B677556317EFECCD61984
+:107330005714605CA28CDF47763D2B3796303B3A82
+:10734000CCF7D9C3C6EB61C453555877E887D6D17B
+:10735000B72269FA502EC4B52ACC9571DE834D5FF1
+:10736000EC3DE9D76F29C99BC36CFE87ED7BB1DA91
+:107370009554E986323C17CF040EFA8955EE27441E
+:107380003A68993D08F7061BBF97D8E33281243E3F
+:10739000ED5A3F25CED7AF5D84BA6CEB737798EB8F
+:1073A000372D9AA90D4B479AFC81E7FED0F218CFF2
+:1073B000CF8F313A72F1F3F9F4CEF9A93C9C680908
+:1073C00017A05C84D214CD3F4CF287DA4983F7587A
+:1073D000C6C36607D63B9A6BEB2F853C0F9ABDDF81
+:1073E0009243F34B917C77F4C17699EB73A3D50765
+:1073F000F3966C247DF01DC65A649F7D6223C9ED0F
+:107400008D3E95EEFFDBB740A67856740A5CEFB66A
+:107410005BA4887DFF7F84FBE5F17712D2D3B8DED1
+:1074200083E73CA221A0732EFD13797E693BECAC6F
+:107430009942F04DD5DCFB59E544EE67D85615ACC2
+:1074400073FB1B16E6F278D98BB995BFC3F9978504
+:10745000D355C89A176BD087F93450C5CF8F09859B
+:10746000FC9C8D0F0C95F36BB586F7860A90A4F300
+:107470006743AE1F78EF177D5C4E3705116F31EE15
+:10748000D789EC1028694FEA32BBF1EC4E7BEEF263
+:107490001F223D32B967207FF7CC0D92BDF76E8F6A
+:1074A00042F6E7BB37C3AFD19FF4AE2F072CB654DB
+:1074B0003F12C55F3FC5E6DBCF987517E67F69FCD5
+:1074C000FBCCAD02F99B7EF4417002D2BB110511D9
+:1074D0007FCF6229D32778922084303E1B5D04DD64
+:1074E0009763FB9E30E1CF17FFC9C2D767D3FE1366
+:1074F000122BF0BC96F820CEFF9938E461FBD9FF3F
+:107500005B25A1FFCAD187BEAA258F22DEE6815561
+:10751000D7C3DA6F53387F6DCB53D218A79C552051
+:10752000921E02BE507A2AFBBEF4E0EBD598DFB97A
+:10753000B46226D6C4F169BD4BB4E4719C77B5B68C
+:10754000AC3A97D52F3FA693FCBD227EDB012CCF12
+:107550003DCECB3E3FD7E3518F719F0F58FAFE24AB
+:107560009AD79B61AECFB6C4CD5E531896AF32EEBC
+:10757000E5F59E2F70E8806DEB3AE6A5D3BF75A2C6
+:107580008BA44F1CF43F4185619F3F71E8C1143EBD
+:107590000C3DEC09F37DA11DF3CD6283F966EDB6D8
+:1075A000FE36DA7CB34C7ECA5B22D33ABCC3F42DE0
+:1075B000BCCFE37C3EB98DEEFFCCE42707CECDE512
+:1075C000793194C30EDF68F3EE26B9ECBF41A1FB1D
+:1075D0004C1D3E72F8E7D29C013EBA0FE5C58AB059
+:1075E000BE98A76898E0E693AB47E0ABA5D07F20B4
+:1075F000C6CA4B65B07298083A3CFFB725935C7CCD
+:107600009289CFA50B0478D5230779D9856F6DE0D2
+:107610001EE02C76F250EB7254E6E71E1C3EC5DFEE
+:1076200063C1F3631DA201B81FB5E7AE36226CDD5E
+:10763000E4DADCB5C80F5B84440AF92132EF54E880
+:107640002686F777C7302D12FD87FAEAA788DF5F15
+:1076500009915DB66DEE1A8A4BBD7B737232EE2FC7
+:107660009B18DE5FA5FD3C3D56A45CDBBEB13C6FC4
+:10767000428FF36732CEDF83FD3D6D974DBB5E1FBA
+:10768000D563EBEB919B3F8D723EF86994EF539B72
+:10769000944E15E9A1BF48D5B2E52BA722BCFEE563
+:1076A0007E28C7FB18D968941FD0AA4A353BC95910
+:1076B000C2E5C4E5534A77B9CF5739EDEE6DE822FC
+:1076C000BD6653C35E7AE6D7A601F3E882A5968E1F
+:1076D000FA87FAC74502EEC770118FCBE3FB4697D6
+:1076E0005EF7695BBEAB785F101B4F6DB274F7FD40
+:1076F000B4AA2864BD47E84894FB89D526A0EFEAE0
+:10770000BE7FA6FC85FC1243F82C969B3AE9F765F0
+:1077100002DDFC7DACC4146E74F51BABEDF2ECA382
+:10772000AAD82793DD540F9A8546A0DC578DFEB961
+:107730008EE5C14ECC6BCEA437FC7BD54537EA1F16
+:10774000AF26FD098E72FDB5BA58253A6FAD577652
+:10775000A2FFEFF7B12ACA67EF88089EFC02E7890B
+:10776000F177A611923FCDF2F338BC358DC7E1B168
+:107770008C71787C621C1E9F1887C7EF1887C7F230
+:10778000B71B4C2A633C1ECB188FC732C6E1B18CA5
+:10779000F1777CEE6DA8A3E70F1B52F4FDD9867A32
+:1077A0002A5F6ECB5728E5BF07D6F105C5C4FCA9F3
+:1077B0006E7B7DF69BCBEB7E86FE42881AB8AF07C8
+:1077C0000E35BDF2EF7699EEC98E17E7A3FF126270
+:1077D0002260DCA12DBE9DE9A283F30BC8F7824E87
+:1077E0007177AB0EF31EBFB1ADF70A99E91F25F112
+:1077F000DBAAF258F9C96D2FB7619EE9057AE3CA91
+:107800009DAEB21E99B5E6696DB03CB96CA71C641B
+:10781000DF9F89FCB20DE54520C6F5C367B7FD9A29
+:10782000F4C3EE62A600A1BC2B52D248EF37E23A75
+:107830004DC579F07CEEBF83E638E6F94DD6955913
+:10784000C8A7AC7E37E78F51D6C760CD9CF3DB0D60
+:10785000574F2C1F553D3AA73B643DF65D18A69F38
+:107860005668D67A19EC5B7C7C1FB60AB89FB8C301
+:10787000C7E54347803FA7E438F90D55CDD102CC89
+:10788000FBE17CDC11E0F713F44F17E9777BA05E96
+:10789000F87BECE7F3E341C3FCC859D38BF3D14E3B
+:1078A000F8854D0F532747F8FEFE8F2AEDEF1F9FF7
+:1078B000FC644B1E2B4FFD17C3C0FD7A0B1841947F
+:1078C00027D6562E4FBE553E256F19AB7EF19CEF45
+:1078D000E6A17E3CCF964F69DB8E696CBD6932DADA
+:1078E00011EFBEC4E5E31BB67CD9E9EB4DD17ACEEE
+:1078F00009D3790B804ED25F1AE332E58989E3F828
+:1079000053F1699FA6FB335B15BAAF49F9C33C95A8
+:10791000FCAEEFFBEDFB8A7B49AF5102492D97BDD1
+:10792000EFB444F253346BC134DE9BB5253C8B7EFF
+:10793000BFC12A93296EB6A58CC77F42916BE85EC2
+:10794000ACAFF404A87E6B58A57CE174D99E835536
+:10795000317C8A1AEA07697339DD636969A246795D
+:10796000C7EC5FF47D6D8CFC4174FE18BFAFE5F190
+:107970000ADFD843546EFEA446FD839DDF4F2A9A4A
+:1079800088BF2791E8F1DE4BDBFF938FA1BF640D29
+:107990003FBF32435BDEF31CFBDE62AA8962C60F87
+:1079A000ADDA3BFB42585E05144F0D4D7FBD298477
+:1079B000F56FD40C9EAFC5CF4B807D0F724BD98A2B
+:1079C0009EFFC0FE578660AA81F5AB55E4576881DB
+:1079D00017F0DEAA428288BDCF9D25A0DED65A4B85
+:1079E000D77332F8BCE70C5AF2AE54916EA4A57965
+:1079F000344E2B982AD6B76A65DA3F0BC36A37FA3A
+:107A0000170A6DFF84230FF253AEF306EC7FE3D722
+:107A1000CA9EF308636FF4960B32EEE12DB7E927A7
+:107A2000136F99F3CC8F3D938BF0E4AFA59313E7DD
+:107A3000C17F6F6CD6329CD7386D9FB0B39C4C1F02
+:107A40004DC77BC821D5E8CED7F873E19D51D6D27A
+:107A50008BF4304397416778F918F43761FF5B6C1A
+:107A6000FAEF28F2EEE3BFB0ED1FC6A76BA37330A9
+:107A7000EE2182E5EA1FE322960B9E291D799EF2F4
+:107A8000D4CEF19EFAD376147BBE5F98BEC8F3FDC8
+:107A9000E2DDB33CE5E95D9778EA7F6C6F95A73C42
+:107AA000B3FB4A4FFDD907977BCA737A3FEDA93FD5
+:107AB000EF95D59EEFF3FBD678BE5FFADB0D9EF215
+:107AC00065FD7779EA3BFA7FE6BE795394CBA30F45
+:107AD000ABF7E3EF03B9CF1D67DA15E7DDAFF3C707
+:107AE000661DE38410E5F7E9CAB8BFB3F2862F70CC
+:107AF000FB4C5D68E8286F5645B97C5D9F67DE8E5C
+:107B0000F2B532AAD23E2187793D397C05E923932B
+:107B1000763039359BECB681EF18AFEE68B016962B
+:107B2000B8FC5A01AD13304FAC325A43F70A3AED64
+:107B300065CD04CC9F5B15D5B91EC4AC5EBA2F4091
+:107B400067ED5DF36276225D31D1CFEC48D4FF075B
+:107B5000EC443987E2C3CC4E243BD20872BB11CE31
+:107B60004AF4DDF88A40F7F8333B90ECC867C2CCA2
+:107B70008E9C89765BDF169443FD3F9529DEC8FE17
+:107B8000C84E2C6776E2E65CB7BFBCAF089F69D0F1
+:107B9000C6E3B347E916C71691DDF8CF48CF9FD9A2
+:107BA000F8521DF63BBD9CDFBFD731A6368EFA7466
+:107BB000475117F1497F91CCF7213951EAF6031E5D
+:107BC000B0F7AB90FA2DB257D93A905C76D6618B6C
+:107BD000D097C67B0EAD2F04C92F3EE937FEA3C850
+:107BE0006F6AB13A01F3048DFD8A89E3DD6BE3B975
+:107BF000589B59853F0759125FB60F9F17E84C1FD6
+:107C000061CFD2D27BF6E1F37B51327AE122E3E914
+:107C10002A9431EA42EEDF966728E92601FDD20C6C
+:107C20008E2CF689F394A23BF8BD4025F21B487FC9
+:107C3000681D9C6353A8CC5329BE1C40BA10E84968
+:107C4000F4149043B4BF04F0B02A962B843486C455
+:107C5000507FC5BCD1CABC1D44078E5E8BFA6E92A4
+:107C6000DBD10790DE62B5DEF50FA9DF263CB5D883
+:107C7000E7A23B72F543556CDC8E82E23CF4EDA248
+:107C8000DF65994BFE1CB4F7DD477344474F20F97D
+:107C9000B30073190A06F522C60F3BC429086F8288
+:107CA000E2F0814312D9FD81BB3BE97758039AA5E5
+:107CB00003E9FF968EFD5617AF243FE1FFC466919E
+:107CC0001E1CA8FF5156BC05FA2430670F8DCFE863
+:107CD000050F903E0063823AEEB3F5B1A0B9338B45
+:107CE0007D5017B1ED9F498EDF3341E7625BD12FA5
+:107CF00017C6AD4D15319FE7F69F1678EC9ADB0B52
+:107D0000B81F73A8F103CC1E4DBAE0DBC4FA4539A5
+:107D1000DE7A76590DDDBB8ADB4C399E1B2DDB49A3
+:107D2000FEFCB3CD3AE67DD5D9784D61320FC3DF85
+:107D3000240516ED447992C7F42386D24ADBFFE28C
+:107D4000F86926E6F0F8BF6181C4FD773E67DF126F
+:107D5000CFE17D353AE8CA5CFB2A005281F9BEC604
+:107D6000FEAF07CF0F4EE970ED7380FB81B73C6D1E
+:107D700087B77C61DA5B665AF4CBA807AC00E0FEFB
+:107D80008FDDDEEF61307D186F19EFDCB39FE0E728
+:107D900009550601D2775957BAE76B6C7E09E73E61
+:107DA000CC8C7BF5A7EF4993FE7295FDBB1F99F72D
+:107DB000BD8FC7DF019941F3F2ECA3B37C12F92523
+:107DC000D09F64B8FC49259AEEB1AB1CBF50A65CAD
+:107DD0000F1EBF07D817B2EB937EBC37552B43FF5E
+:107DE000435BE1977E73A27CD00FD326A7DE3C4194
+:107DF0007E4EA67FC5B89F04FDD7B7FFF48EFF3E29
+:107E0000E1F267BE1B4DCE46BFC7FD93797BE75EAF
+:107E100055E7DCDF3B35F2F382CEE148BAE0B8B398
+:107E2000D4FA385757D2E3D08FE4F8611C7FC3F5FA
+:107E30007926E9E75B8CA3A9FDACDFAA5FFA01FB19
+:107E4000592C1D3AD880F26EA24C7925DABCB58F38
+:107E500004D1EF89DF59B9AA481F4BFCF1A28FFC6E
+:107E60000EED36DF3BE7571DBF4D2287F347AD6D63
+:107E70000FB09906ED731B41D4932FDECDD6D0B34E
+:107E80001F72BFA1E31F9CDEE5FD7E111E0527FFCB
+:107E9000E84ECA8332E6F33CA8312BD3FB709D3FFA
+:107EA00066AF33C6B72AE70EC659C7AE4AEF433DA1
+:107EB00074869DCF54F6E2F3F493BF20154A485FD1
+:107EC00017611E136B671C903DE746C68040F94062
+:107ED000638E49469AF533E359EFF73270958B106C
+:107EE0003E6F39337EC5D4ADB76F10F0F7535302F0
+:107EF000CAB3ADAB988DC0CAEB72EC3CA40BE002E8
+:107F0000A4DBC552D8C0FBF536FC5CA23C64FF89FB
+:107F100069BFC0382ABCC4F32EB5293C2EABFD4442
+:107F2000329804042D0433678607E35D5F3D67E004
+:107F30005DFB037EB4C7D9BAE33EF404B3FB4B7CCC
+:107F400068C76B54EE62763F969F61763F3EF7308E
+:107F5000BB1FDF7F8FD9FD58DECBEC7E7CFE90D936
+:107F6000FDF8FE5966F763F9C5DCCA2D397330BEDA
+:107F7000554AF4149CB987F21EDB559F86F4932969
+:107F8000CF2A2B6F575730FC6E0E2FA6784BD56239
+:107F90009E77BF256731D9D303FEBC0C7FE8A07F55
+:107FA000AF4F70FC7B78043A6EDBB3037ED2A44102
+:107FB000F71B8CDC8FE9F4437ED6F3FAB1FDAD6F8D
+:107FC0007DE1575F6F669FD6CDD9DE112CC6733F1A
+:107FD00029FEDDCE3FCCFCDDAD757B1A291F501983
+:107FE000772C85EBBAA73C4CFA06FE2E13CAED4C53
+:107FF0003BD1B10F33F571E799B91F66E6CB446CFD
+:10800000BD64A4FC8D6DBE14C5B7AD46265F70BFC0
+:1080100068482F7CDD77BE7F77B29697714E99E7DF
+:1080200067F90FF2BCBD0E486AEEF93BE723C8E6DC
+:108030002BE67E46B77F375892A6FB1B826193F4EE
+:108040004581E991A4576A498A17B60DF1FBDAA771
+:108050006C39D138EE1ADAEFDB5EF491BE556DE77C
+:10806000C9358F53A9DC3C6E6E9CF22B2373D5BEB1
+:108070002CFD6C88140FBBBF4A6CFFD787D9FF2536
+:108080003F3F17D6BC6FBE8AE7A73AC2AB7BD16E23
+:10809000EF88C7284ED0336EAEE77E72295E41F777
+:1080A000594861AE674B7195F46C19E75F3658DF3C
+:1080B000A9773087D30F6373F26306C29D54CF2F25
+:1080C000274CF4B7F8633C0FD9AFF1B862B0440461
+:1080D00035CB798D1EDB2FDE5196D4D0AFD31197DF
+:1080E000E9DC47873E6BA8B82CBFEF42F3FA079B49
+:1080F0006DBF43739D427A61A23E57ABCEA7730B0F
+:108100006790CF3BC24D2AC669FF3F82909C4F00CB
+:10811000800000001F8B080000000000000BCD7DD8
+:108120000B7C14D5B9F8999DD9577637996437C91E
+:10813000E6C90402060DB8818487C6380991A222D7
+:108140002E0235B4B42C0414E415D1B6ABD5B2214B
+:10815000098F2025581F282DDD50B02FBD8D96DEAC
+:1081600052ABFD6F04B9A8A8A97A15FDA146B43E8B
+:10817000EECF6A04BDC547FFFCBFEF3B33C9CE64F9
+:108180003604B5F77FB1653833E7F19DEF7CEFF347
+:108190009DB38EBCCA60CCC758CB3FC5862E2F3C42
+:1081A0008B18EB8127934219AC9C318F2C3096CDE4
+:1081B000D869FC73317CEF76ABAC129ECB1C717727
+:1081C0000963E168454EFD44C6166685990CF51CA9
+:1081D000BEC5720CDADB1953B13FBD9DFE0C627F48
+:1081E000558C89F26F6BDEF20FFEAE3FC5F41D2C8D
+:1081F0008270944A6FF7BA18B3294C386D8332F302
+:10820000CA6F9FC7E8CF6911FFEE09867DA9FBF110
+:10821000B9FEADE6AD8983DBAD2AEF75880A639BB5
+:10822000F7748419943F131482CBCE626A01CC6B2D
+:10823000F5FEEB5904E6BF55EA71C900C7D62F8495
+:1082400085E1F2C1FD2FD3F003088B219CF0C776A6
+:10825000FA7CF85B618A63126305F866243EF9775D
+:1082600018A5FB34F45F91807299060FFC7FE261E0
+:1082700063B9AAC7589E7CD458662C640F8F63ECF0
+:108280008575D0E9398CCD39F6DE3196CED8DC58FB
+:10829000E8F147038CE5ABAE705C666C1E0B3DFEEF
+:1082A0002A940B1A3C2C1182C16D6C19AE0B4CF345
+:1082B000A55280AF8111ACAC60591A63AE81FEBF8C
+:1082C0002B67123E1A7A17CD64E319FBF1CD2D8C82
+:1082D000413FB13A21BE17E09F5DBF67F62878DEC7
+:1082E0005B692BBA0F1B45EC6FE1FC5CD0D9699838
+:1082F0006FA6EDFA1123A17E789A4768817A3FBE76
+:10830000E0DCCDA550EE993E3A8478077CBDD53FA0
+:108310001FC0FFBC306FAF8FFF6CE589B9A3E0B918
+:10832000B3F2A1D9F89C935C1FFA9B35A5B3D90190
+:10833000FD5DB9529980FD85EB8DED0BAA8D6580B1
+:108340009CD609E7EBCF1A0CEF99E0318FAFF777A6
+:10835000EF3A85F0CFBE007A007C86F113B40F4B64
+:108360007D5208F09C5F2DA871A09B0255503B2DBB
+:10837000F8619B463F66FC8BB10C867C56374F8C70
+:10838000B743957C979DF09F3F53882B307EFEB27C
+:10839000BEC469287FD3658F8BF03D2BB34BC0EFF4
+:1083A000F7AE64ACA384C04BAF4D5ADF7B5D6DF676
+:1083B00062F83E2F4F6436A003563D8AC6233846E6
+:1083C000123E8E737CB8081F052B438FFF0CC6BF6F
+:1083D0007A8A5316A1FED50DFCBB0EDF5609E80CB8
+:1083E000BE6F053A8B119D49C793F133E7D8AA5563
+:1083F000488F734CEFC7CA8CE8EAEF538F8E29067B
+:10840000B856091D333C008ADBDEC4182E346010D8
+:10841000E95AE7471D4FABF635133F26F199FD3476
+:10842000F233FE3B8750437CF698EBF732CA8DBFA0
+:1084300064F6EE6440C2BF9059ACBE9AB1FF93D6C9
+:10844000779E00E5DF74346CDA74117C77F7FD9663
+:108450005530E6DCF89D19338A06CA69EDCB67CC46
+:10846000B808FBE3E3C014627CBDFBC725FAE893C0
+:10847000397C5B54B65D84B26493B7874A06DA658B
+:10848000613B61887661B65DB268E7D5DB019E36F7
+:10849000C0FAA569F34AD3BEDB347892C797106F50
+:1084A000B2E215603DA4E9928CF4F255E1C839D3EB
+:1084B000BC236CBB7DD4E0760076B30EBFCD1AFE34
+:1084C000387E4F1EDF3E04FC5F373ECED49F43FB19
+:1084D0007ED6F041F5F539A9E78B70D9515F298A2D
+:1084E000D796D4CFB6EE4F9F3A1F88579ACF426E99
+:1084F000E843B2AB7208E8BC5CBEC3859D4B99F5FE
+:108500007204F86133945578BFB9ABC3A5C0FBF2D0
+:10851000D2DB3721D19727D218CA83714CCEBC1F2A
+:10852000FA1D274B2C81AB76D1419B07CAEC0A166A
+:108530001A0DFD6674A7913CC92CB9E017028C9BFB
+:1085400099E952B1BD2773D22F18D10753A4247CC7
+:10855000786A5FA8F3205CB35908595112E2AC164F
+:10856000996C2C637BA19C79C91E560FE5097FF796
+:108570002922F2B4C4F55D3BB6473DDDCA0EA17EAB
+:10858000C9D3E4CF2687BC9DF4C7751243FDE1191A
+:10859000778780F0DC0B5D89C097E5E559B3EBA1E7
+:1085A0005C7EC41652149C4F87508CF3098AA4B782
+:1085B000747CEA7264C24709CEF463597C2FC0DF31
+:1085C0006A8F27505EC5A65E2DEF0578F29724C905
+:1085D0006BFCAB0F7080F03E7DD5DEF612A46FE928
+:1085E000ADE4FE323E8A27509EB1DA8630B60FCC1B
+:1085F000940CF23F4D936769263DD09A65273AD196
+:10860000F50153254586790BDABCD98FC2A40F9C9E
+:108610002CE47290BDB280EC1081F50AA73D307F4A
+:10862000AC887017F1790C6A3F89B767C1900BED80
+:108630001C675A5313D6878F59CD805CE1BA341525
+:10864000F5B3E060AEBC09306F1B8B74019D340B39
+:108650004CC2F2C0780986E3395D9E56B4BB1E73E6
+:10866000B5D8107F2D87417FC03C36DA19B7FFE4BB
+:10867000902B0BDA4735FB6D6DC5C85C2C67E4E8C1
+:1086800076615846BA5C9B5D9A8BF661BABFF7DBA0
+:108690002867676EFFE30C17CAD53AA87301E89DF7
+:1086A000CC8736C540EE3A4F153025C9CE734A4DBA
+:1086B0000CED29E7A962C3FBC43A98D1390365D50B
+:1086C0006BABC771D6642A84D75A26B762BB5A40AF
+:1086D0008692B42ECE53794C9968D57FA1E17D0264
+:1086E000EC24C5399CFE3D4C294BEE7F548AFEC7D5
+:1086F00098FA972DFB1FE8D76FE8B74D626447C71C
+:10870000025E5A77B35DB031B3EEC64CB4479DAC50
+:10871000A9CBC2EEDC906923BADB186CEA51A17DCB
+:108720001D03C6073AB9F88BE322237B06560AE8F5
+:1087300085154A7DFD743C12EB71FAB5C50486724D
+:10874000E962C96EE0931A662C9BEDA27361AD11CC
+:108750005F365F650FD2CFDAEC34C56901BFFEEC3E
+:1087600059C76A4A47C37CD3C2CB18F0F1CFB71FB1
+:1087700076B505A19CCEE9E481EDAFCE88C1FC7A47
+:10878000044E7F6D011BE1255C97DB2926F51B76E6
+:10879000B0D12817C348DF5E0E0F8EDF935DB8BBE4
+:1087A000DD627C10BB06FB61B62AD49426CDAB47B4
+:1087B000B383FBC79B56D0897CD03F9E9355D1781D
+:1087C00022E03F79BC9C2F37DE5F717EE503E3CD6D
+:1087D0009E6E9CDF6C874CF39BADF1AF3EDE5F710C
+:1087E0007E255F623C9C5FF278DF30CE6FB653A689
+:1087F000F9CD16397DF58F97F3E5C6EB59574676D7
+:10880000F04607C827A093B48A7DAE5130EE469754
+:108810005D16948176B5B537B8E6A2EEF54E9B9E0F
+:108820000DE3D45D0295F3B19769D36B4B19DB2E41
+:1088300070BAE8CBFCAF4DE8479E9CB9B68CF48982
+:10884000665F5F8955411F5F29717867157AE3CDAF
+:108850004978BC17E4880A70FC14F85D057EDC05D5
+:108860007C89E5F8BA203D7783BD8ECF3D002F7E11
+:10887000BF6F5D88CABF5A37859E7A3F6553B8DDA2
+:108880003EB6DADA6E3F2F8BDBEDDBF3E4F94B50CB
+:10889000AFD5A685502FB229173235D9AE664D8F88
+:1088A000B9E1FBD66FB20AD48D637670B803F5399F
+:1088B00064B7A7551CEC5907E58D925D41BDBC51CD
+:1088C0006133ACFCE631A867603CA793B7671772C9
+:1088D0003F2C10EE3D887A6F0EDAE980D7ECB9BDF7
+:1088E00007D1FFBB0AEC72D2CBEC8D83AFC2F71776
+:1088F000C0FF6BC7B2E865329467CDC9A6F1E14FFE
+:108900007A6D0EDAEFFCCF4F669E20BF22ECE67A3E
+:1089100021C0663FDE8DF0861C4A9CFA6377869103
+:108920000F54BBD24EA2206C473D9D8D7A1ABED704
+:10893000BEE1643684EF1207C9B5B9738D7EC37684
+:10894000774246FB677B45803543FF57CD347E77C2
+:108950003A39BF854D7EC32C5319AC2DAE77C50572
+:108960001968EF6FC4575307E32D7AAC79E3C1243C
+:108970003A55B27C81B73DB8106C0CCAB34F58F968
+:10898000B67AFC589845C68AB9FD3FD6C5361E044E
+:10899000D4BF80720FE5AD83CB8DC1FCC1E1A9D1FD
+:1089A000E4E3BDEB7A6ADE1A3D005FBE1417500F98
+:1089B000142C83F749F395027101FD1D26DE5F81BA
+:1089C000FE8D791EF70AF7E7318BF1F4673E93DEEF
+:1089D00046BCE052A23C37CFB766D07CAB9F2D653A
+:1089E00056FCA46C477B6ED66131D4AC0CE0439F3F
+:1089F000FFFF345FBDABE19BA90196007A7916E8D1
+:108A0000BD9DFB310CED549D5EA102D94F575E090F
+:108A1000DF912E54B508F1F9ECC8BE3DD7603B900C
+:108A20001D2DE8EFEA7650E2651BDA415FB6DF2BD9
+:108A3000AF7390BDC558BDFC76D9407FA9D607FB62
+:108A40007D3B497FF6DB89F8679226FA10C6E6502F
+:108A500090EC819BC03E467F3F5AFF9E94CEBF1F45
+:108A60004FB253F1CFF1A4FE5ABA7F2D280057E739
+:108A7000BAAE9AB7EC03E3962C936D6D68CF35C709
+:108A8000058A4324A01ED803239729B656C0FF1297
+:108A9000EC07E9D324D747B6423FC9764AF55CF9DB
+:108AA0007EA087D6F2BA8E103C37EFE0F132BD7E61
+:108AB0007FDC2C1023FFDCCE9A9800703ADC3FFA62
+:108AC000792FCC476D9198BB06CA766EEFB0577D73
+:108AD0002417446FD32FF17B3006720BE75DD7F478
+:108AE0003B2CC76C2CDC02CFBB3DBC7D5472C94E05
+:108AF00058BF76B975064E3F272F726F168CD796E2
+:108B0000934672D0F19A6F37CA2947E6846568F7B1
+:108B10002C88FE308CF148D9CF16862DE86B816603
+:108B20003FECD5E8EC983D519409704FCFABDB9BFF
+:108B30005565513FFA23EAAF46B4B6C31ED5FAD9FC
+:108B400069B3960BFF9EC5E39D57AF7AE8BDFB6006
+:108B50003E9E526F08C96DF3F96C9F601B5CBF3B72
+:108B60003BF287ACA478ABBB5496280ECABAA6A237
+:108B70003DB7F9F39F76FD0E509EF5B997E46C96DC
+:108B8000E88B0B2586F68F26CF436FFF974F5F0C40
+:108B9000E2FAFCC5CD48BFB2D8D397AA18D7D4CB38
+:108BA000F046C072A65EFEEDA5E86F0E94AFB9B4B4
+:108BB00016CB48BB409435FEE866D4CF5B05A611C2
+:108BC000F14DBCBE9DD72FD4BED75CF6FE2FB6A10B
+:108BD0003E98E4203F74AB6607E9F0A97E91F0A3CC
+:108BE000FA87C6E36B1A9E5DC3C7E36B567838906D
+:108BF000A7BE8EF875B32E01E9D8FDB9EB466C7FA0
+:108C0000CF3A165E02B0EF54F6FD7A9B42EDDFB626
+:108C10005A87F3F3D477B2088EE3BFD80670F8749E
+:108C20003826B31B53C0F1E150EBF9A71C2EE7BE69
+:108C300015E0CF2CCDDE74387A82B3E12957DE758A
+:108C4000830CF2664349578355FCF9333FF70332EF
+:108C500053C4DB037E4E7FDDB9E1D30847ABFC9004
+:108C60000BC74F135818EB6F99D2CB84A47E4301E6
+:108C70008E6780DBE987766953998A74E663BE382C
+:108C8000033AF35572F8B7045F600AB4F395C1D3A1
+:108C90008BEF7B89FFD1E5E0F400820ECA0E8D3E9A
+:108CA00002FEAD97A29D9F25EAF457D48EF4E2B060
+:108CB00069F563459761B9338B9727DD51D41E2B36
+:108CC000043DE380362817F21D64EF98E75718E05B
+:108CD000F3DB96ADE6FBB32DF0E9ECA575DA3ACE01
+:108CE000118AC1BAD6D87A1A1AF1DB655EB2D7E01A
+:108CF0007D433C69FE976BF8BADCCFEDADAD9FBA12
+:108D00001AE216EB918A4E276AEDCF824E27FA2D92
+:108D1000E803E8B412F19F44A71F336B3ABDD06F4C
+:108D200041E740A7D5F8DE8C0F735964EA8E450001
+:108D3000A0F4D9F45F6D436D7579F58EDFC1B3E6AC
+:108D400073AFE4873AE2184676A2CDC5E5FB80DC36
+:108D50008F5C86704B7213BD17BD61DAAF792E2B15
+:108D600045BF9327ED40B9358C7EE721DCE67E4B8D
+:108D7000FD8CD6A3E6326F246E81F77FFA256E1F35
+:108D80000778BD54FC322E60A3EF29F945A7FFDC1C
+:108D9000F05284E34CFC523FC02FAB86C72FFB88B8
+:108DA0005F3CE59C5F3C29F80523D1289F3794F070
+:108DB000F28FFCB9C40FFDFCC3CAE87B3FFFB0B221
+:108DC000CBB0ACF3CF658132AA6F6E9F8EF3B6C085
+:108DD0004B9B5F9F47B815D7553D4F6E15C9DEE8D1
+:108DE0006528A73A595FB713F9B05A08ED85B7B3AC
+:108DF000623DF52E05BFF7B0D9607F6CD5E87E17D0
+:108E0000C283FED0242D9E25F5B0AB7C83F9D857C4
+:108E100099288B24E17FA486C76F07C277E0F89D6D
+:108E2000AC772CDAA5A9D6E91E6DBC9B82EA3D562B
+:108E30007C7F26BDF328EA9D6C7CF27EB23E7735BE
+:108E4000A11C30F379CDEA87DFBB6F887E1ED6F098
+:108E5000F6D0D9F3FD4329F8FEF726BEAF14465AE3
+:108E6000F2FDC329F8FECF567CFF15F8FC3FACF8A5
+:108E7000BCD33F3C3CBB035CBFBBB5F5FDB2787EC9
+:108E800047C3EFEBFEB3B6035EB7C213E0B9779802
+:108E9000787EC76A9D00CFEFFA69BD6D31DC17405F
+:108EA0007E47FF7DD3E4581FEE875AC0D197DC8FF1
+:108EB0004BE1FD8069FFB100745EF3D9A650C48216
+:108EC0002FA1DD3F92E1D7DBDDE397B5B8B3723D6B
+:108ED000DAD53B2FF7F2FD846CF5732B7EF80AEBA5
+:108EE000EF0C58C8E31A1B9743DFF6BF4576DE57F1
+:108EF000E8DF6FD5FF331A7D9D49FF8F49D2FFD838
+:108F00008F59DE75321E4FD9961D290910BE7A2F52
+:108F100045F9B4EBE62C01FDBA423521A0FD9FAF27
+:108F20008D77BB5F21FAD2DBED92128284F59B64D0
+:108F3000212618FA3B6FA8FECC70007CE30324DFE7
+:108F4000D4F3F1798FA6CFCED61EBA30A84E0E70CC
+:108F5000393D15C757CF31CA697D1EB67017EB452D
+:108F6000FD02EE77DC82AEF2357D09FDD4513F9AE9
+:108F7000BCBF20206BFE29EFEF6CF50DC07739F6F2
+:108F800007FD5E61059F192F6782F3960138AF0ECA
+:108F900058E825737FBA7FADAF13E9D3A4B8CE12DA
+:108FA0008D5E80AF1A113E579B2DC60203FCABEBC2
+:108FB0006B904C69D8FF4E078FA3EE5C797B2DE652
+:108FC0001B74DE2257204AF297713DA7AC2CA6B83D
+:108FD000EA6AAD5F33FCFDED1D5D632796D3B86B88
+:108FE00071DC8BAB5902E54606DA09147F90258CBB
+:108FF0002F64393B821897DD2C74342C463D7AA9B6
+:1090000097F42D0BCEB58C4FE94F3DFEA4CF9B05B9
+:109010002BCF50BF99EACB9E8E26B493865DDFD9C5
+:10902000616957FD44B3AB607E3F1E12AFC100C5FE
+:10903000B774FC0E1E87AF5F6DB849407CA795C31F
+:1090400090C09269E10EDA6CB595C6592FDA4F657A
+:10905000402FD4DF0B9671BF81FE36E8707522FD7C
+:109060007C55B8F47AA9C7E3F570FF8CE21D5E2E3B
+:10907000B7E803944F1CF65BEE1FE8CF8DEB645509
+:1090800002FD73425632305EB851D383E09905AF8A
+:10909000F2FDEBEB0DCC23CEE39DA6FA51C6E99E83
+:1090A000055D64DF61183E996E8E6A74B02D27FCF1
+:1090B0007480E4482884740DE567495EBAA0ECA387
+:1090C000F25FA92CF7979FA7FA415E9FC9F2B0F013
+:1090D0000CED5EA176527F3FC7A8ECED1FF7351A65
+:1090E00027D05FEEA5EF85BCFE70C7495A573EFFFB
+:1090F0001E91E6FFB1A466E0FEE837A38D14279A1F
+:109100001F5D4ECF4DEBE45A8CC73DB3AEAFB515E6
+:109110009EDF9CDF28A3DD3F7FE94F68FF5EEFFF06
+:109120004AF42B90DF156906D94525B6F01EEF00ED
+:10913000BF0DC0D1AAE9FBDE7AA42397CAFADA2BC5
+:10914000A0FD948F5A5B0D794E1D943FE356A4CF3A
+:1091500092E3EABA1CFCBB433D1D383B3A36CD973F
+:10916000B18330FEC7DED2788CE8BA4EB6E2177D06
+:10917000DEA9FAD7E79D4ACEE8F8D3DF6F2E9D200F
+:10918000F3FC9FB8012FEED1F594EF73A5A0C1E9D0
+:109190007369FCC6EBCD82711E2A27FA50907E6758
+:1091A000697E9C592FE8E3FEDD1119938DEDE0CD2A
+:1091B0002D132CF03B4CBC1D5DB72C5C6F4779DC4C
+:1091C000E5A6FD7B26539C5FAFD79062FE75D95C08
+:1091D0008F30A74AF3D9726B461CED8E2D8BFE2083
+:1091E0006370C533EEE32ACCD7F4087D9F2C46F993
+:1091F00072AB8FF2311A167D52D59CD4FFC2037F19
+:109200007261BCB761DCFA6C8CBB2C64D2C7C9F943
+:109210000EE6711BA2AB896E63CD428395BF752CA0
+:1092200087F3F5424C9111A9BFE3C9FBC88B9409A0
+:109230000E8C4F2C8A19F77340433A903E1A379997
+:10924000DF27EDE788D83FA379C770330FF55E9B22
+:109250008DE86D27E00DFDC0625097F83C9693A510
+:10926000F1410FE1F35F0DCFB11C6E0F395D2CE6BC
+:10927000C91AA09BDC480743FDE4AB14687F33E0C8
+:10928000D3F323BA484FDDE1D5CBA0B700FFE1729D
+:10929000CDCE29E5DF6D5846FFC7D373D0067CDC01
+:1092A0009EFDF865C1B1D05F79246893A9FCA44400
+:1092B000F6212F33F6F89307C99E95CF1542C0FFCC
+:1092C00052F793878BC89FD7ECB1EE27C91EEB2FBF
+:1092D000B30483F974A6F597555710CA23FBCB3115
+:1092E0002CEFD2ECF8F6ECEE275BC93E09B7652708
+:1092F000E9EF5AC6E3CB5FB77EEC0C2EE9C07CA247
+:1093000058A98DFCBD34133F3E98EDA07A637223BB
+:109310007767C373D62D7D12C61B1C792F04500EA0
+:109320008C283DA18E04FA1F51CDD36458191FB764
+:10933000B3742DD90D9DDABAC0FFD6A3DE1B589F9A
+:109340001ED3FAF0F50857F6D0FAF8CA7B68BD6C60
+:1093500058A6B81FDF8FBFA292DB1BB293EF2BFC86
+:10936000269BC75DFF942D6A4FEE976694DE4EF103
+:109370001DF70C1BD5CFD09E6639FEA76CC9A05730
+:109380000EE445FE909D64B7C2FB705925CAB740F4
+:1093900016EEB3D6964A37223DFF5CF34F619DEE41
+:1093A000A0752A09A445F8BA3D62B96E65C35BB7DA
+:1093B00017D745485EA55AB76FCE17C35671B76722
+:1093C000353C7CD0F0B7BB902D57B9FA1CB80FB321
+:1093D000B974BB21AFDAB56F760273A1F5BCEAF5BB
+:1093E0009EF46A94DBE6715FFCE23F0288DF999F9E
+:1093F0003A2DE5E37F6BF2F185750DD40E16589189
+:1094000072480E309EF7D29F27269C76D2F45EC417
+:109410003CB4EF12EB333637FC06ED572F0E8A0CB7
+:10942000F7C71732635E198BEA79C13C0FF645091D
+:109430005C5340E18B31210498628BA4D9BA5C3132
+:10944000E487CD9B3BFB10EEC3376AFBF0205F0C3B
+:10945000DF979AF2C6AE6E5814AED7BE9FA4BFE394
+:1094600034AFB90AB71BE77ABDA45FE785E787EB9E
+:1094700093F6E35EFAA76899875E97A3E3251CAE8F
+:109480001F3D182F8BC3824356CE8C1F333E6A2557
+:109490008EAF451ABECCF831E3A171EE6C5A7FF362
+:1094A000FC5F7485093F2F027E305FD88C0FC62287
+:1094B0005720DDBE345F64681F4F1767DA314FA055
+:1094C00071B6C030BF68290BA5F3FC6075D625497D
+:1094D000F09AF168C657E3A32C94807E1BEFF4D179
+:1094E000FA3DA7E1474C7C48F30AC3BCDAF9BC8ECD
+:1094F000F3FC5599E675955AF17800BE475A41DA62
+:109500002A567A84CF6731CCA75D1EAC4F3E61D519
+:109510004D48274B4D790B66F8CCF0CF4439387560
+:10952000F03EFEE41C5F80CE2F8C67216D1F3F83D1
+:109530008E3584B287CC5B18E0734E5F0BA3B3FB10
+:10954000C7C37E0516E92FCB80DF994FF8B7CE83CE
+:109550007FAF0D8A0AE609CE9E3FAA0DE71F66E19E
+:109560008C4409DAFB7D76942357313063A1DDC545
+:109570003049D4B7E17A3795F57E4F747C64273D46
+:109580001E614D7B69FF5DC9983B2EB57C591B74EC
+:10959000D078663B6566C5E80C9417667CE878FA77
+:1095A000568E96DF309E8D3F1BBCF4A0EC457F1697
+:1095B000E368B08E7DCB19DB5D31B07FCC0A556E90
+:1095C0004FE630DAFF5F9D93A9D91D4D147758A05F
+:1095D000E9856376D6F0A097EF234F48928F0BF37F
+:1095E0006A57E724C5FBF47D642FEB25FC7DD7E5A6
+:1095F0004D88E389EEDEEFA70F925F7ABE6684F2B4
+:1096000035C58C950AC5C53CE9E35906D8C58CCF4C
+:109610001BFC989B7230AEE7298EA31130F3895F53
+:109620006C9AA70CACDBE6257B3B105CF7D2DFC75E
+:10963000A87385E77378B475ABD5D6ADDF8E2E836E
+:10964000F749F83DD1A1D961655A1C1FFF40F94483
+:10965000A91A1FCA7FD5D7D15D06FE87218FB08397
+:10966000F0A7AF2738117DC89791A04439C336E6DB
+:1096700022FF387213CFC758C8945D981FB4306A60
+:109680003F91DC4F244F2238229BDD5ADC2444FDDD
+:109690002CCEE3FDB032EEE7F5D37D0CDA27E53FC3
+:1096A000DA5C604A62FB4C1642FF09FACB417DCF7F
+:1096B00036258D3372F0B8A9FA33B713B5FD5BD1F7
+:1096C000190A8592E4F46F72B89E3C11ACECB28D2D
+:1096D0004C8DBFC52EBF2A25E5C51ECF733558C595
+:1096E000C5F4FE74FDDD6F27C6963F956C277A376B
+:1096F000343E75F8A2243B31D6F814C515F5F2595D
+:10970000DA89CFDFD5F8542BCCEF1FAF7E83F2C7B9
+:109710004F3481C0043CFAA3D3D89B7E940F32E926
+:10972000AFE206F0A830F95B52C622BDBBA305AA82
+:1097300094942F7B2C4721B8FDA52AED9741D32E79
+:1097400074C5FD524840BCDDAEC5CD8070C7CEF6B5
+:1097500025B7E37E883E9ED325131C0E7D3C166AFA
+:10976000A6FCFA998CF4889E07A2F3B5DECFBB392C
+:10977000C678DD30F8F9DD9CAAC1FC2C8A4DAFDF3C
+:109780008A72E22991FCB0EF046FA2F7E678C089F3
+:109790001C6E1F8E102327502EF4343CFF9D1F405B
+:1097A000BB35FB9C2154C3ABBEFFDE8FAB14C4138F
+:1097B0005FFFF94B1BEFACC2798D9664DADF28E2CC
+:1097C000711847B340FEABBBC411DE07CFB703B57A
+:1097D000237293E07A3B504FE59133385C27A0CF5A
+:1097E0007605DB6D6F207FD1C7F7BD4F280A9DEF4F
+:1097F000133D8CEC09D1C99F99B9DC2ECDCCE5780D
+:10980000766B4FD729811609E9BA09F72DA418E517
+:1098100041BB4E49F4DE210896F69ADE9FEB140810
+:1098200067C497C7DCDE41EF713ED85EF433837DB9
+:10983000938FEDABF0C9E9DD75CAC3E1F09BFB493D
+:10984000E7EF35FE33C37163CEB462C4CBDB017581
+:10985000442E8F6F7339EC7DF2A8307E38F298E792
+:10986000EB5F9127B928AE77AB101F0DF2A9BDECC5
+:10987000441BC9AD1257139E934AB29F047EEE86D5
+:109880009FAB18B04FFB2E995389D16BA6DC1B1AE6
+:109890006C6FBD5EF9C9BC3958D0CE4F7C5797BDAF
+:1098A0003128833DF79A565CA48CDC80A1FE2BAB5B
+:1098B000B97DD688F65988E496C1EE32DB675ED072
+:1098C000F773802E96062519E9C26CA7B557CE23EB
+:1098D000BBA61DEC1ACCD71E6CA77179735BD4C6DE
+:1098E00054A8F74CB5487EC63365BD4F5C8CFA6210
+:1098F0008A5D217D51D677DB1CFA3E91C6F16AFE66
+:109900001DD4E7E71D429EF86878F76CF59BDEC62C
+:10991000A4F57E66CA9B63D12FD89522BF428FD310
+:109920001CBC99E77FBD7E87107722DE6E116DD853
+:10993000EFC20A1FE5AD5E227A699CC6AD62DC49C2
+:109940003854D32FC919B01B99589DF33CE2619B41
+:109950009DE1F9C1A21B7B0D76EEC2A8D19E8B348E
+:1099600081FDA39CBD1D68B6FFCC76CCDA5CCDAE84
+:109970009BC026A0FDF2CCBAFDECCDD10376CCACD9
+:1099800014FBDFBA1D7381ADEEE65C1E17A4FD83E8
+:109990005992F5FEFE559A7FCA42DC1FBC447C9F5B
+:1099A000D6EB444852107FDE9B9EA4731DDE7F8A57
+:1099B00061ABF1B6E7727F7C978391BCDD35C14323
+:1099C00079D7DD379F9BDB4BEBA5DC5D8DEBFFA4EF
+:1099D0009DE4602AFDE68E8AAC1426E68B0AF4D458
+:1099E000D77344D4CD92F5C38814790ABB73B9DC1C
+:1099F000CEBE85D9D0CFCE8C31D5CA2FD5EB813F05
+:109A00003A1D63D4503F9109F0AD2EB551DC5FF79C
+:109A10004BDD767EDED7FEC8F531F44F47007C087B
+:109A20008702F0A11C2E897AA83C32EAA7E7A86831
+:109A3000263D4BA305F47D7474143DC7444BE8FDEB
+:109A400039D1F3A85C169D48CFB1D10A7A9E1BBDCF
+:109A5000909EE781DEC27AE5D15A7A8E8B5E4EEF18
+:109A6000C747E7D0F3FCE86C7A86A2DFA6EF15D1F2
+:109A7000467A4E882EA2F713A32BA85C19BD81CA83
+:109A800055D1EBE93929FA437A4E8EB6D0734AB4F0
+:109A900099EA4D8D6EA1F205D19FD0F3C2E8767A96
+:109AA000564777D2779D9F3D9A3DFD74708F4CF954
+:109AB000F62C518EF231151FBEA1E9856FE4AA4F35
+:109AC000A03CD5EB1DD1CE1D98EBBD9A3B74DECDED
+:109AD000D15C4E9F1F848EDF85C769F575DB1C1C2A
+:109AE0003A8EC0CA0367D8B7E2F33B9CCBDBEF9258
+:109AF0003AC8DED8D5C4281FCC57D923503E43508E
+:109B00009A61454799417EBE6B4C6EE45D9CA737D8
+:109B1000EFAD83B81F7565AC27300DE92514489B60
+:109B200006FD8D68B5917BAD3059C0B252CFE404CB
+:109B30001B88E7807D65D06BEEA04D8BFFF4CC9C3D
+:109B400088F09C5B3A81EC576D3FF9C8CD2319FA38
+:109B50001DBB1C09414279B996B1643B7CD786C5CF
+:109B6000F7259FD370071D9C8F36B1C7304E56D254
+:109B7000A1D4E179C2513BD4C730C573743C52972C
+:109B800006E5737E157B0C9F63BBE2751E789EB75E
+:109B90003FF118BA4FE312BD755E289F7F981DC034
+:109BA000F053458F32CD07E58947D503B84D52D5DF
+:109BB0001B9996AE203CF196748067D76B60684124
+:109BC00079CAFB1D22B82503EB0F76DB8349EBE254
+:109BD0002EED5145F867E18D7205CAD95D52AF3B54
+:109BE000B37CF0FA74E2BC719EA057F66AFBE8728F
+:109BF000D27A5405053D1E9817AC1A880776B63EF2
+:109C000047F1C0CE34B916435D7D973079B7827481
+:109C1000CCFD84B4B691A49F74BA03FC1AEC49B786
+:109C2000D6EFAE7E7BD31ABF55FFCBF07B50A3E7B8
+:109C300054F87D1AE79177663E9E1EE47615F07122
+:109C40005D303B75BD15412E4FCD78DE25C9E7123D
+:109C5000BEBCCC16AB1858B76B34FA3E135E23FF6C
+:109C6000CBF07A517068BCB24A3F8F336BF969A967
+:109C7000E4CD9114E744BEA7E13149CEF178A90CB7
+:109C8000726E546A39578B70650F21BF52E43BAC3A
+:109C9000D7E8BB3B3B1C0B669F39AE7F9B4DAEC5E7
+:109CA0007C97D878467E02D897AD98BF3322A64CD1
+:109CB000A06D2C14CA88C709E7919F5E02F686340E
+:109CC0008161AA63029F575466DA1697635E83C662
+:109CD0006FF2A26032BFE9FA7E801F75BAC8EAA4AB
+:109CE000731640AF984FD8ADE169A01F1E8FD87092
+:109CF000537E677B921CEC0C155059AF9F8A7E5F98
+:109D0000D7E9B7F539DAEFBFA2DA3ADFE4CF41514C
+:109D1000CB3BEA5391CE63354CA6F3CEADC7493E5B
+:109D200065827C124A787808C72F8CA6DD8771DAA5
+:109D30008783399A3F2EA77DD3F7FF8F9EB781AFD8
+:109D40004E7E66B5DC8DE72A46801E52504E560385
+:109D5000EC95A8E71CB4EE0AE3EBA854B3784220D4
+:109D6000BC25D06F8ED9F8F98C238E2E95F48E23D6
+:109D700053C6FC93EEECC813C121F842F62815B87F
+:109D8000A8AF0457CDF4E6615E8E9C86E597A07C73
+:109D9000DB14CC13EA655AF936EFD42F1F7F7865B0
+:109DA000C78A23B84F7561503D8AF0005DBF827449
+:109DB000AD9E234B141F1EE6FE93CE9F03FC24573B
+:109DC000E8FCB4A89CE4E15BC1A4FDAC54F6CD2E44
+:109DD0004D7E7E121CDABED1E9FEACED1B0DDE37E6
+:109DE00035B9948AFF673EF1FC8E3D6C20FEE7CBCF
+:109DF0007FB14752D0DE9EC6DE9C8871AF1E4EF703
+:109E00008CC7F9548CFF011DB82B5DA6B8AD30434B
+:109E10008BBB0C19AFD5E3C97ABC4F8FEBA56B7424
+:109E2000851706A01E4F9F224B8BA9BF5E7615E6B5
+:109E300037E5D90C7C8D720BF7E75D6D59D2C8F20E
+:109E4000817E196B2239D5D9C0E4F64CBEFF9A0148
+:109E5000F2A5633D233F2FF68C48FD9F546DEF61C3
+:109E6000CEF7C94A4020CA059529728E760E8188A0
+:109E70005C267A7532D685FE36FB51C8E5C038F7C8
+:109E800067025301EE239F89F49430C20D8DAE0812
+:109E90005584B0716D467508F703C537A10C70D6AF
+:109EA00067546760F9C89189216611BFBB3AB2C88F
+:109EB000105F32E3A9BFDE77DA285F61E719F63F6A
+:109EC0002FCA73E876E7E43CDCFF5CD2D7EA5006A1
+:109ED000F63FF57DBDBCD2872EC57B76F25672FB70
+:109EE000339FC59B93EDA6A4FDC5DABC2ADC4FEFDA
+:109EF000DF5FEC1993BCBFB826FF163CBA7F4FFF5B
+:109F0000FE62A412EBABFEAE0AA44F3D1FF688839F
+:109F1000EF03B0894F05140BFA5850F17836D1A3EE
+:109F2000E64F0CFAAEC5CDCC7EF09C3C631CFF64C2
+:109F3000684E46023FA688E3EBF13CDD0FC6789DF4
+:109F40006CC97746FCEBE32F10B81FCBEC02C93B82
+:109F50005D6F823C598AF88666148F569D02E56BC8
+:109F60009D0C352AE417A5902FFDFB062C31DA6AEB
+:109F70009F75819677627EFFA33CAE9716D8799C39
+:109F800052B87E6904C75D90E7129C4976D28A3C3C
+:109F9000AEC7F5FD1747FEA92AC4B3C31151ACE6FD
+:109FA0006DDE475981B66015C753C842EFA5C2D3CD
+:109FB000517B07EDCB1D5D2AD279DD9391C974EFFA
+:109FC000432AB9F00AD2CF68C6E6E5733D34B08EB5
+:109FD000D678D3F364CCFB55FDDF17B9E9FC8D3996
+:109FE0005FE6210D6F4F6978F957E7CB3CA5E1EFAC
+:109FF000692D3EA3C7B3AE4821EF2FB0D53D90C722
+:10A00000E38C43C665CED3F37D34FCB00363E95ED5
+:10A010008E2D3DF6B85B40786CB47FD9F09F620816
+:10A02000ED2FBD9DD7242FF4FC1DBDEC3925B07854
+:10A03000D23E8247EAA238A9E79444EFCDFC775B91
+:10A040005EFFFE22F19FBE2EA9D6595F17F3FBFBE0
+:10A05000B47539BAE84F413CEFB2C5CD2CF38958FD
+:10A06000BE31FE6ECE0348B5CFFD9AD6FFC9C8D427
+:10A070005C94CB0D8ED8E8E1F0BD8E9F17BFF8A39E
+:10A080000BF96CCB29E70CABF57849D34FA04F37D0
+:10A0900025EF83FAE63FDF8ABD7A24E33EA8AE4F80
+:10A0A000F57D504FA5791FCD7A1F740BB3968FA9FC
+:10A0B000F64107ED7F6AFAF6B3BC14FB9FE5439FB8
+:10A0C000673F90C78695F771B5839F9735BFEFD1EE
+:10A0D000F8EE646473D15DC057372C7252965262A9
+:10A0E0009193F8B071919BE2B28D153CDEDB78A7BD
+:10A0F000A0EDD719E3B04F83BC5809E33FABE99D0E
+:10A1000037597812DAA3B32A05C33E79B8DA6D2835
+:10A11000CF5FFA93A7F1DE8467A6D8158A3F435F25
+:10A1200031B40BAA799E2253FA6EC338B71E7FD67C
+:10A13000D7FF99EA37E91EB418D8F9A343187F1658
+:10A1400089BF9E796122BF974E18D80F57C04ED84D
+:10A1500072C128CAF778B9FC5B14E7DD8271719887
+:10A16000E9962FFE3883E80894720CF9757C561C2A
+:10A17000E563E3B80939489707C67FE6C3B8E8EB5B
+:10A18000B79CCCC675EA5DD7447907E67537C799A1
+:10A19000CDF1E5B38D2757E71BE9E169533C5997AA
+:10A1A0005766F991144FAECF1F463C59975BBA9C46
+:10A1B000D0E5D7CBE5EDAFEE867FBE1C71124CAF7C
+:10A1C00068F3EEE74B8D2E5FD6F9F00B27D9230706
+:10A1D000C63F4CF9567ABDD6BC4CA2AF6F95C7EDC1
+:10A1E000B43F8B790A6503EB323FB2BCBF8CDD7E96
+:10A1F0007BD9F506FAE8975367946343CB29573E1A
+:10A20000B7C352E56BF6A4D43FA3C94EF5FCD51EE7
+:10A2100077957C793DD4B0E80F0AB683E70E6A3FA4
+:10A22000DE11895BE827333C9E53228B4F4C7EAF77
+:10A23000F0F7FD7AC041DF6375CAFAF5016E4FB7DA
+:10A24000107FC69CB8EE52B6DA8A749097ADB6E528
+:10A2500043BBDF06D40DF949F2B4C5CEF723451B45
+:10A260008B3C688197C7F235BCB07010FB6BAB3587
+:10A270009EE7D29FBFC997B4F3189382685FB7BCBB
+:10A28000511144FE39E89B44F676AA75DBA6F31318
+:10A29000CAAFD103FEC4566DBD814555DCC76DB351
+:10A2A0008783C9F1C6ADF99CAED2A73ED48376733D
+:10A2B0008B6CA33CC11699E75FB77AA5197BB4767E
+:10A2C00001433B493F4745F765485E637EF5636858
+:10A2D000EF54A59EE763F9DC3FB4B3C41DD5C2803B
+:10A2E0005EB11FAF75D1FD0F4C95797E53C8904F6D
+:10A2F0006DD7F44B9D295F4394BF9CDF569C1DE9AD
+:10A30000C6F534FB6D8702EA63F83E2AC59C481FF8
+:10A31000519735DF1FD6D6B5459BAFF95E55D17441
+:10A32000EF8368BAF72156D7F4CB5EA4B7F54EB9E0
+:10A330002540F73CD0BD0F51BC72099EFF70F37CE5
+:10A3400016F0FF26F3F306A15E94AF2CE8A2785432
+:10A3500047A1AA164259F4D976AF87FE5AD43A15C6
+:10A360008FAE74786D9DB8CF979317790DE731CD87
+:10A370002791DEE9B82C8DF4107C777339C26461C3
+:10A3800012F98374690AFAE078BECC1E74503CABB3
+:10A3900025C27A9DA3F8F97FA4F75A9638525D82B8
+:10A3A000F6B6AB12F17424343123622127F4A77975
+:10A3B000FFFFD5EFBD544CF9AA62E4A37CDAF76F36
+:10A3C000DC8AFBFA6BF68B21DC47F8CEF75F1EC305
+:10A3D000CF1B19F799EFF6D4F4A23E8B7A1D54AF38
+:10A3E000DB37A903F1D422F83AD0DF6D79E3FA9F85
+:10A3F000231E5B9A799CDB8CE783BEEFD3FD1A2783
+:10A400006139B1BEF97E0DD6713D5F27A78BF62D60
+:10A4100061BEF6822ABE8E141F3CE6A37BA04E1EB0
+:10A4200039E045F8BEC2BC65EC37F5BC0B65D257C8
+:10A430001AFD3029BC09E7F503D1D7D11EC07BD264
+:10A4400060BD11EE47ECE4EFDFED49A7758D027CAE
+:10A45000B8AEA2AF5E4597ECC3FD22AD73546AA2BD
+:10A4600079B198C4F6E2FB473EF9F18548076A16D0
+:10A47000ED6A89454D84970F012FEB2DF002F433DF
+:10A48000A600FDE5476EA07E3A1C2E192D9B16DF17
+:10A49000243AAF3CDCFB452A0A847E7F4BBB5FA499
+:10A4A00002FB1D545FF3B3D0DFC6EFB532FB38CEED
+:10A4B00006F09E2A7F452D30DACFC3C85F510B2CA2
+:10A4C000FCBBAFB0AE97170C49CFC6756D71FDDF01
+:10A4D000E96867A9627AC85D0C655C27C43FAE1362
+:10A4E000AE9716B72115A4201DC88902A4831BD2DC
+:10A4F00043489F67921B12E3EB6E97809EC1AE7339
+:10A50000CA91A37476518BF7E8F2C4CC672D2EA3C1
+:10A51000BC6AD1EFE53B363C7905F4B202F16096B6
+:10A520005BC3A593EF0FA693EF0F45276979E12849
+:10A530007E473C154CA078C5CD583E7244DCE718E8
+:10A5400089E3F1B8595F1E937727E565E9F06CC69A
+:10A55000CD6ED2CB3C6F4A6A600CF3E0FC652141C2
+:10A560002E1F161D6DFE9AE9E88EA1E48397F5D0A3
+:10A57000798D557A7ECEBEA1F373BEAAFE81F5BC5D
+:10A580000FE169F17D9FE87383DD25F37BD4CE6E07
+:10A590005D1F2C10CCF70B3D988CB7C1EB1AD987F7
+:10A5A000EBA8164CA27B8CD8944564377567ABC773
+:10A5B000305F8C4921835C1CC43F9ADCFEC1390AA0
+:10A5C000E5ABFEA5599373CD4E19EDF1C70337FCEA
+:10A5D0000EEBDFCE9430C6436B6C6B094F1FC2FC91
+:10A5E000768748AE96E1BE4F94A585343DFA1F08A4
+:10A5F000CF0CA559C882F781058A8DAE2155B63397
+:10A600005BF9F0F1F0DC603C3C37141E400EFEA715
+:10A6100046CF37223DEBE7ED53C9C137B4FECF42F9
+:10A620000EBE91CC5F5F03FDBE3FB47EFBDAE5CD8D
+:10A63000A7389E59DE78357EFE6E8885305E3EDC1A
+:10A640007C36B03715E4AFDA7417D14FCB8302E50F
+:10A650004B811D1EA1B2CF45C2E6A0CFC1F37FF74B
+:10A66000F1EF621DC7B3194F42213F9FB5AAEBFA24
+:10A67000B064C8938AF1F39AEA09B954C4FCFE6A3B
+:10A68000A267BF66CFE879FDE99AFCEFD7F3336D97
+:10A69000349EBF88CB773FD83B681731A997A11F5D
+:10A6A000FF83029EBF0FFC40F40DA384911F32A6CE
+:10A6B00048A63C2DCE2FD912B77732034C205D83AC
+:10A6C0007962F0FE13B027F07E824CD5D8EE076990
+:10A6D000DF15506FF52EF23609740E3EDCFD33287F
+:10A6E0006761BE17F08D7F86B17E364B2A5BF8E737
+:10A6F000B13A5686798B15855ABCCDC182A41F35D7
+:10A700003F5DBF2F503C73DED7D4C261F8E9171705
+:10A71000EA79C2467DDCE56696F1B523855C1FD5F6
+:10A72000F7D6D6A15DBDD6C7C8AE5A8BBA13CB99A2
+:10A730000EBAD726D45DE9B2BAAF2253B519EEE707
+:10A74000F5CF4833DC7B9B1DCE3294731BF20DF5A5
+:10A75000F322230DDF0B969D6BF85ED434C1501E9F
+:10A7600011BDC050BF04109C5C1EB5E93243FDD141
+:10A770001D5719CAE7ECF896A1FED8F862C3F7F3A3
+:10A780007E759DE1FBB8AEB586F2F9FB6F36D46FEE
+:10A7900061D6F777766878057E2739D6ECAD6BA061
+:10A7A000DFD1901D8638FF755ABDEECC4965180F74
+:10A7B00069395E5146FE70FA0543FAC366B9984A94
+:10A7C0001E9BDF6F2EE4F2F383C7DE9EB412E91CFA
+:10A7D000853CC8A50FBCAF6CC0396D2EE77909FA6E
+:10A7E000EF6298EFE5EFDFA794549ACF822C07B37E
+:10A7F0003A1F705DA162B9BFD02A845CB857940A31
+:10A800006F478689B7EDDA3CBE2ADE8E09C638105E
+:10A81000EA93072DE07A42E32BD057BF453E047DF3
+:10A820005599461E06BFC7E16CF5890E07E8937F70
+:10A830002FCC1E9C1FFE41C3F3D7DCAD60FD6B78AF
+:10A840007D5BA80CD725D5BED21385E67DA5AA656C
+:10A8500028E716F8D284E4FB9AF76BF5F478764B88
+:10A86000FA67B4AFD4E208950D675F697F21E3F71B
+:10A87000E0E2FA6627ADAB5D0DCA96FE9DD98E610A
+:10A880004FE03D1831AF4479C366FF2EAAC96DDD94
+:10A890009F930ED692BFDFE21D49791F2DEA5AD24F
+:10A8A000971D29FC5CD097BDB83ED37C371AFCB904
+:10A8B0008178804AE3415BB29B5A92FC7F6CA7DEB1
+:10A8C000CDEFD5FE1AFCE08F0ACFC2FF5718F783F1
+:10A8D0004F328EA793AA8DEC84936027A0FC6D93D2
+:10A8E00018ED7BC72A05C5CA2FEE58AFD987EB39BB
+:10A8F000DECCFBDD663BE38AD0F584B736A0275774
+:10A9000025CE9FDBBF6D767EFFA6EC0F0751DFF6ED
+:10A91000653BD86E80F660368FCFE978F9B2F228C1
+:10A92000A76890FF93533484FF738958DE85F7B688
+:10A930009E38C5E3220A1E450CE03DE47CFDD63E70
+:10A940003127B606F55489D484F9EB225332102FFF
+:10A950006B0E8B2C2EA01C33E6E7DB59D35D188FD2
+:10A960006301FE3EC65CCD6827654C31EAB14CD52B
+:10A97000A8C7FC33B24C7ACDA8C7721B8C7A2C2F97
+:10A9800062D46305CB2698F49A518F8D88D699F4BA
+:10A990009A518F8DDA749549AF19F5D8393B8C7A75
+:10A9A0006C6CDCA8C7CEFBD55A935E33EAB1F3F7E3
+:10A9B000AF377CAF48B41BBE4F3C7CBBA15CD573AA
+:10A9C000AFA1FEE4A3BB0DDFA7F6FEC6F01D10FD90
+:10A9D0001C9E67C07B6871112F7CF721E377A63A34
+:10A9E000301F7F059ECF8475BCA8EF61437FAC8389
+:10A9F0009F5B88C17FB85EEFB008DD030072EC504A
+:10AA000001B45B1D17420986FAE9C1B771DF6679A7
+:10AA100050243F6E0D065B911EEEF7C5911EAEDD14
+:10AA2000613CFFB03C6E2CC7807E148C2B00FD2057
+:10AA30007DAD30FD6E04D883446F2B14A909ED4A17
+:10AA4000337DBDA3D3574C7D0ECF73E8F3D5E767B5
+:10AA5000D7CF9F6AF4A76AF4C7C44708EE1505224A
+:10AA6000FDFE8E3E5F15FEE3DFDF77E03C3ED92F33
+:10AA7000303FC0710D8B1D2AB098CFEAFDDB1DC899
+:10AA80009FE67999E761B653DB8A8CFB489788DEAD
+:10AA900010F1DD0B22E9239A02F2D903FCBCDEDAC5
+:10AAA00027443A17837C88FE82186B20BCAC01BC1B
+:10AAB000E0BDE1BADD7A426B77E2A7229D6F3E13DB
+:10AAC0003F2A1A3E9C41233FBA9534133D19F1EBBE
+:10AAD0002933F2E78AD72E75A0FC3A04F816A6307F
+:10AAE000E60B19F97585B892F6F9743C2BF01F8EB8
+:10AAF0002B81A98BF35E0DF34E2883F1BBEC91ED16
+:10AB00001B0A2CE8E64CF87DB0C8B8DFAEEFCFD515
+:10AB100002761C1679A53AFEBAB3D53FA27C4CE565
+:10AB20000F1F283A6B7FF840D1D7EB0F3F5334A467
+:10AB30003FDC370BFD29274B0FB55BC4FD242627CF
+:10AB4000305E6B6FE271BF81F8DDD71EE7790BE1F4
+:10AB50009464AE27DD921EE7091D8DA07D92716E73
+:10AB600008F3A2861BE7F870B01EFB70283D06F6BE
+:10AB7000C5313C4FA866E4D7DB9099A45019DDEFAE
+:10AB80008C20F03CA4FF46F806E5EB966669F9C711
+:10AB9000CA90F9C75768FBBB1706D57F221CD0DFC8
+:10ABA00069ECAFFF3EB6CA6CEA27FD0CFDC4EAB8FB
+:10ABB000BD16B3F93A5AB8BD46FB4C5F431CC35FA0
+:10ABC0008C712D2FC77F8B83C76DCF36CE565C3CE3
+:10ABD00028BE545C3C447CE91FAFE6F273AB21B065
+:10ABE0000E2A52D3B77E0E532F6FCE34FACB1B26CC
+:10ABF00070B8CE2DE6EB1ED1CEE3D668653DEF12E0
+:10AC0000F316DD13A03C939F53D2CFB5EAFDD414C5
+:10AC1000FBA8FEA7C1BA1AC4C786127EFFCE864C17
+:10AC2000E33D3C278A6A6B705E53B4FE6B8A193F22
+:10AC30003731523BB7698A177CAED5FFBCA88E9ED0
+:10AC4000788E16FD1287285AE2735AB14DBBEF86F3
+:10AC5000D173BA7E7EEE4E7EBECE7CEF02F0C98B03
+:10AC6000F8FB506FDE66277F0FF4119D9F5B5AC083
+:10AC7000CF219AEF538894C98750BC7EC2CA2DEF6A
+:10AC8000E51994E770EC26CABF7B662A9385BC332E
+:10AC9000E73D7CBBB85F5F85BEE439BAC6E261E4DC
+:10ACA0006B2DD1CED1F5A6713DD697E78AEFB6F0E0
+:10ACB000776FD5E8F236CDAFC5FD69DC27C7FBBDA0
+:10ACC000ADF6CB6F2DE6FBC3C33D577DBB231241D1
+:10ACD000BE359FAB4E759EBAD7D1DB968BF08E6595
+:10ACE00021B4DF7317C8DDB9502FAD5EA1F38F1B00
+:10ACF0004A58FA14FC5E610BE1B98ECCB9F2063BFE
+:10AD000094334B599600E5DED81C1AFFB606268B05
+:10AD100000D77DC5FC3E8485B77C44E36557C3D42A
+:10AD2000143A773E1DFDB35803A37B0BCDF3BC5BF8
+:10AD3000A35F571BBF2727A3D43A0FFFEE62DDBFE7
+:10AD40000EDF85F45B5BCAF6F1F3B3FC9C025E4B4D
+:10AD50004FF99BA134DA17BC12D68DEF9FF7D0FACA
+:10AD6000DD149CF6536CA7F39B43CB53309F27BF56
+:10AD7000AFF8ECCE93A72DB08637A1ADF735D9E16A
+:10AD8000FB918ED2CA3AF8EF977E71FAB43849FB3C
+:10AD9000694705DB4722A8FFDCA0FF047C2A329D1F
+:10ADA000A3652E81CEC3BA9426A22BF794901F7F61
+:10ADB000178D2DB131BCC7659AD65E6D6002FE9EBF
+:10ADC00004E502929C36FDBE841A6A6D86F697E011
+:10ADD000BE5908F3BE43CBB0BF7A6F9A8CF14D7762
+:10ADE00069532DAED7E30B791FB7A7382FA19FB3B7
+:10ADF0001FB87F6ACDB3867B051CCB9F35DC2BC08B
+:10AE0000963FFB55EE1578AD78F9B3FF13F70AE8D6
+:10AE1000F20DD4901DEDFAA322BF47EFC347AFB6A2
+:10AE2000E33A6CA8655D88F7D8678067D7009EED28
+:10AE300075E1C777A25DB2363DC47F4F24F61D840D
+:10AE4000F3350F93B1BD9E6F28B032D2D7731B0478
+:10AE5000B21F98D4B71ACBF31FF1C8E83F7CF8E8CB
+:10AE60004B4531A0CF576F3DE9C3FCD4D7A53E1F5A
+:10AE7000C2F5EE2DCFFBF0FEAE576F11290F85CE38
+:10AE80007D27E5890923387D2D1A113E85F4B5709B
+:10AE9000DD3F2725DB672C9A4DFA7E791C204EB6C4
+:10AEA0007B7FE531FCAEE8AA2EBFA1ACEBF9554E95
+:10AEB000EB73F35347703E5C7E7FA7A340C1F12341
+:10AEC0006923A0FEBBDA39A077F7F9C88ED7E1591C
+:10AED0007C7F8503EDE1D71F71B204C5057BECCC07
+:10AEE000CBF507E65D44F8D083E03CF4970207F227
+:10AEF000D95281F53989B9D921C4F7DF34FFCF3C64
+:10AF00008FA5AFCA0E5CDFA5B5AC0FCF9D2DBE518E
+:10AF1000D8F003A8BF38E225BFDF3C4FB3BEB91657
+:10AF2000EFB311ACEE816B3AF467E86709F483F68E
+:10AF3000E7D20EE3F713876F38B413C6DDB7DF41EE
+:10AF4000F6E2B56788F78F1FA1E9A5496CF2E951D0
+:10AF5000A4FF32C629A9ED0E5D1FBDBB8E5192CA5A
+:10AF60007FE1EFFBC2F3FD75323D4F152BB41E2B75
+:10AF7000F6771FA2DF16967A26A1BC9BF944A3E7B9
+:10AF80005B6C20AF685267CB819D5455CF574D50B5
+:10AF90007C6F8A76FFCBB5DAF98FAAA3E67CD5EE73
+:10AFA000C7FF8C761BCCFF6CEEED5930CC7B7B4E13
+:10AFB0001C9EE6413A993D42F37F26035EC4AF8E64
+:10AFC0009754ED56A5F8DD169D9F4E697A66C99E89
+:10AFD000D91BF261FC9647DF29C6F8718C71FAAE75
+:10AFE000FA29FFFD9F2A6F0ED19B0BE9330F9B9827
+:10AFF000EE7988B11759127D5FFB8887E82408F63F
+:10B0000090730ABEE1F45A85F776227DBFC0DBBBA0
+:10B0100034FF36F2C8ADBCFE9F1DB233487C19B474
+:10B02000D13311B44DB1B867CB7CBF5887B1FC8127
+:10B03000BDB718E5CAB5263FF403C13A3FAD71C4A8
+:10B0400048C2C712459D8E79004B5978038FDFF2B5
+:10B050007B7BDE953A0EFD10F97D8FC06280A7558F
+:10B060007F7CE0DF518E5DF7BB3BD3518EBD2775F2
+:10B07000E4E0782BF7B6A5A31E78578AA563FBF703
+:10B08000E25C9E0DD29723044D0EABE902C8E4D5D5
+:10B09000446AF0FF257D1B6E8671FE1BF08C7CBF21
+:10B0A0007ADFA7543EA4BAFA5810FBED9D8E702C9F
+:10B0B0005FE46D6A0EA17F69E4CFEB7E79678E4213
+:10B0C000791EB1020D7F05D86EF51E3BE5F9A21F72
+:10B0D0008FC3AC617D343F73FB355D6F3A505ECBFF
+:10B0E00036D65778E1E0EF60213990DFD6ECDBF21D
+:10B0F00091988ECFF75EC1DF835A63B24F9769F2A2
+:10B10000DB4CFF5D26BA07FC507C210670F19F6383
+:10B11000E272BCE5D7778F7F03E07B7FCF53E9F8FE
+:10B120007B133AFDEBF73C9FE86A5CE818E21EA14E
+:10B130000F343EE9D70F9A7E52F60360B9507C84F3
+:10B140003F57DA13E917C27C5776DA4348F32B1FCF
+:10B1500010552FDA552F3BC91E59F9C049A2DB956E
+:10B1600082DA27909E63E928C7F5F55AF1C0DFA679
+:10B17000A39C5E9127B299C08AD7FDFE135E1FE89B
+:10B18000DC0DF5573CF8C6F41F6219E489CB62BDAB
+:10B19000A675753B7ABD16EBD5F5C6748CCFB7FC9A
+:10B1A000FA1FB41EEFFD4560B92583DB2FEBFC1BB6
+:10B1B000C5C1DE8785F167727CA1BE59D3252E7289
+:10B1C0006458AD5F62D6C395F49DF2C2CFB48E1DB4
+:10B1D0002318D78F7F7CE0DF1E063896BDE20CCDAA
+:10B1E000C471FFED86740674F08ED4C4E9FE676DF9
+:10B1F00039A8BF97D96339323DF9FB65BBBE47F427
+:10B2000078ED5FBF97A3ED37E4D9481EC4F2709E76
+:10B210004B7F3A8FE6790D8B103D2EFB19BF67F1FE
+:10B2200013F0B3ADFC84A90AE71B27BB7EFCCD015C
+:10B23000949B78670BC0E160FCBEAEE778FEBB93E1
+:10B240005D95916CE77A146ECFC558FC35B43BD749
+:10B25000805A46B9F6FF003503B31E008000000097
+:10B260001F8B080000000000000BE5BD0B7C54C5DF
+:10B27000F5383E77EFBE425E4B5E8457B8791224B4
+:10B28000C485249040D485400C0AB8404494884B2F
+:10B29000C010202101AD60A5CD860002C53628551D
+:10B2A00014B40B8245451B31086AC08D2886EA1705
+:10B2B000438D165BA18B2008045810EAFA2DCAEFC3
+:10B2C0009C33F766EFDD243C5ABF9F4FFF9F7FFA08
+:10B2D000A9C3B93377EECC79CF9999B3E2814BF911
+:10B2E000BF8C62ECE1787DA5C9C25805D33B3D66B1
+:10B2F000867FC215814A493F189FC35F0263790761
+:10B300004675F3A4316662178CF767327611EA9FAF
+:10B31000B36ADE6357E2193BB1D1D445B819CA18F4
+:10B32000565A07EDAFE0DF6DFEB25482CEA3A9F905
+:10B330005F18F43F97BE04FD6C3991BF0EFA65B1FA
+:10B34000220B8FE5F073303E4B71486578367CAF49
+:10B35000E5A8B107D43BA3742C19C7DBFC0DC1CC05
+:10B360001A2D617BA5FF8A9D26E656C603FFAFD83E
+:10B37000F48D91613F3AE6ED35AC7D3D6395E9880A
+:10B38000870A162EAD84F284D19BFF2E7E07BEBBAA
+:10B3900019BE53B206DAA7AAFAAB3FF937968EED7B
+:10B3A0008DFEE7F1F8DFC58C65412116853B42181B
+:10B3B0009B8938CC693FFF855F553FFE81AABF0C52
+:10B3C0002934EA7830FC63081B7245F4BFCFD603FA
+:10B3D00092BAB77FFFFB2AE7E31F18F06D27E1B1B0
+:10B3E000CCE07A09F154F6A5C9EA043C96BD76C9C9
+:10B3F000A88B422A326F7257C64E6FDDF3C57D307F
+:10B400009FD37586A831F4555B9810E3C77BE9B6E6
+:10B410006FF2D7417B03E03D08E839B7FE7BA30E0E
+:10B42000DAC7E631AF09C67F3ACACED800C49BE17D
+:10B430006B8F0A6F79F0DC1342E3E8A98BC5D2DD8C
+:10B44000934139378A59DDF0FEDC16D12A21BE98A6
+:10B45000779925A4FDFB15754703E8A2AD67CC6B72
+:10B46000B4E377EB7F735E0C53E35DFFB5478577FD
+:10B4700005CF81789D8A78EDEFC7EB2596160E9F54
+:10B4800061A75E99D3C791D61EBF0A5ECF563164BD
+:10B4900072FFF33E12E159DA091FEA06750D72C90F
+:10B4A000D8174C85C7D9AF9E21FEFD67779189C01B
+:10B4B000377337FDB00CF90AD0EA3501FFCE759D20
+:10B4C0002778A9CDEC650437160AE91DCD5B8BCF33
+:10B4D000C0FA78446AB49FFE86C5CC190AFD7A7713
+:10B4E00089AE8D30B47392372C02E6B734883D6054
+:10B4F00087F29C4586BB2A307B601A8CF39C33DD37
+:10B50000E2C4F782D8E43AA0CF39BB37AC6B887F6E
+:10B51000DE471AC43009DA7B5CACA02EA43D1F3292
+:10B520005643DFF7B0CEEAAB491E4689975FF7C0B6
+:10B53000F72E38F5CC04DFF3547FFFBA07CA637ADD
+:10B54000B305F134A3FA9E30A683EF3724DE351914
+:10B55000DA3DB80FF047D3B319BB037EA7F3A9B305
+:10B560006F99F3E95C989F189AB9F75D78BF04105A
+:10B570002B02BFCE58A5C5CF6C660F77C7A3DC1AC8
+:10B58000FC7C42FF7519DDF0DE4C4748E54AF86E59
+:10B59000E97A6DFDEC86D3C45FB303F8CB81FCD5AB
+:10B5A000BD3D7FBDA2C8ED403610F96B9418A24393
+:10B5B0007E3ED724BA4CF0CE852506B60CE00B5B58
+:10B5C0000517837E2E3440238477729839A3896FC0
+:10B5D000153E57F0D68AFCD7B73D3EDBEAB71F1AB7
+:10B5E000FC1834297BEBEFE9EBA06C7DEBCB947777
+:10B5F00011DEF1D7B8BFB3F6EDF376FF3095C6B5DF
+:10B60000DBC4705CE7767F14F718C2EF98ACC8B75C
+:10B61000E7169B6C0CF5DDEE505732D6F7067E0030
+:10B62000BAD7ECFA3E1DF53D634B888E9F4B462AF8
+:10B630002F34FCEBB080F3683049388F8ADD80040A
+:10B6400078BFE29D2017C3F7777D3FD811F2F3CD85
+:10B6500067AE9139883F43D9E46DC8BF5D990DE766
+:10B6600053F16ECE8BD5F0FDF2FA46E374A8CF7B92
+:10B67000EFC774D447E7B6351A515F9D35785E60E1
+:10B6800056E4DFFB6B0D80E7B3A1D0590FC61EDD7A
+:10B69000F0BCDD19D2115E381ECE011E705E80979F
+:10B6A00052575AE7F8F8FEBF161FE7A7E2F7CB1A82
+:10B6B0008630315E8D17C1C69F87BACC02CD9F3FC1
+:10B6C000DFFD7D3A0BB9F67CA3E38D24EFFF7F9974
+:10B6D0006F46FC7F2B7D39BFBF2B4934BE40BE6F08
+:10B6E000CFD73B1E21F8F5502B8DF73AE57DE27F51
+:10B6F000EDFCFF6FE83DEFBF76BED7A2F73E99DEC7
+:10B70000A11613EAAD5D3FC6B11B9877EDFF47E781
+:10B71000DDE6FFE8ACE64C18DFDF98EBEEE10279FE
+:10B72000251DFA23BBE2B5EB8E71B25F51C3BE1E7D
+:10B73000390DBEEB047F02FDFD9A90AFF52D003769
+:10B74000839F80FE0543E704F0D05C38D0B512ED4E
+:10B75000B6BE925900367C319DE0C9C53FE833A1A1
+:10B76000FDDDE0E761FBFDD59E19D550BFBFAB4EB7
+:10B77000AA01F82EDBC4E47A802D3D440BAE636A47
+:10B780006C19664935BEBBB2B5EB91FB02D615F715
+:10B790004CD6D64F621BA3F5D0DFA4520373C194DD
+:10B7A000EE0E68BF2EDE42F8BA87552EB584DC381F
+:10B7B0009E4ECB78AA61839A24C48B4DB46E66EDFD
+:10B7C000F1C6106F8897D80CB6D28A5FF1E85B009B
+:10B7D00036C9FE15FC913CDE1D657E09F16462F3FD
+:10B7E000D923D0DF25495F89ED4D0CD68D7CDCB4A3
+:10B7F000DE0CC41B93D79F26990477D91E628867F5
+:10B800007CDE2756F33ECD3B10CF378ED7C5C94FD0
+:10B81000235E0B43AD2EE40BDB8BD17AF85E0DE09B
+:10B820005910FCF854F0148877F43969FD27E35B6C
+:10B8300029D398772AFA9D612CCCBA12FA0F33F7E4
+:10B84000627A3E0FAFA93B161686EB357104AB5BEF
+:10B8500009EB3596AD6F6D9B5702D5BB1F83F76A19
+:10B86000E6C1FB88D75E4CB213FF1759707D2330B9
+:10B8700007BB12ECF73F3FCD06FF339E4AE2DB4F9A
+:10B8800037717FF352EE9BCB0682283198B3733029
+:10B89000FAB9F29FD35384EF894C67C5F52FB3D91A
+:10B8A00024CB60EC97D1BA263C5BA759FF76B575DF
+:10B8B000D1E02DB220420347DB7B68DA779B9CA066
+:10B8C000A9EFEEB84953DFB3749006EE5D3954D357
+:10B8D000BECFC2111A38DE7987A67DE2F2091A3886
+:10B8E000B9F63E4DFBBE6B8B35F5FD5CB335F5FD12
+:10B8F000B7CCD7C003EA7EA9697FF3CEC59AFA8197
+:10B90000EE959AFA8CA627357056F3739AF6430E85
+:10B910006ED4D4E7785ED1D40FFB769B06BEC5FB10
+:10B920008EA6FD6DBEF735F070F6B1A67D9EF9339B
+:10B930000D3CCAF2774DFBDB638F06C43B2CCE87F0
+:10B9400032518D013F819C8D964E6BDA83C75C84AA
+:10B950007C6390F9E1CED4EF34F563ADFFD2F467A8
+:10B960006495400464AB5A2ABBB03A2A43583395D5
+:10B97000BF1EE0B027A05CBCE05C864CB53FE7FB97
+:10B9800038B4239FE63EE444BEBB14CB2CE24018FF
+:10B990000FF3EA91AF75C1977B395471A3309FC8FB
+:10B9A000DC19C0873E814A8B2F98B923810F7D41D6
+:10B9B0005446F822E979A4AF2B9551BE9EF43CDAA7
+:10B9C000D79DCA185F2295DD7CF154C6FAFA53D987
+:10B9D000DDD78FCA1EBE0C7AAFA76F2095BD7CC382
+:10B9E000E8796F5F0E9571BE3C7ADEC7379C4AC915
+:10B9F000772795F1BED15426F82652BB44DF782A2A
+:10BA0000937C53E879B2EF5E2A537CD3A9ECEB9B8D
+:10BA10004665AA6F0E95FD7CB3A8BCC9F710BDD7CB
+:10BA2000DF378FCA34DF63F47C80EF512AD37D3552
+:10BA300054DEECABA6D2EAFB0DB51BE85B41E5207A
+:10BA4000DF53F43CC3B79ACA4CDF3A7A9EE57B9643
+:10BA5000CAC1BE17A91CE2DB4065B6EF552A737C4C
+:10BA60002F5339D4F726BD37CCF70695B9BE77E901
+:10BA7000F92DBEB7A9BCD5B7879EDFE66BA4D2E689
+:10BA8000FB989E0FF7EDA37284EF337A9EE73B405D
+:10BA9000E548DFDFE9F928DF9754E6FB8E5279BBF2
+:10BAA000EF089505BED3548EF69DA4F20EDF77F411
+:10BAB000DE9DBEF3548EF1FD8B9E8FF5FD40655BE0
+:10BAC0003C21D710A017DBF49FEE0AC67942223A38
+:10BAD0008CB7B5BD2FEBE3D5C12F308C7B8CAB146D
+:10BAE000689DFE4CF0D90F484FE69824849762D3A6
+:10BAF000EEFC3B9618C6EEC77F488C35E69868FD8D
+:10BB0000BEFF57FCBD65C38F7EF510DAC779268668
+:10BB1000F63150FF2ADFFD347B4F34FA61CB0679D2
+:10BB2000CA30FEF244BCA708CB860481ECC59B72E8
+:10BB3000F94E828ECA3503B8FD2E9A971C4E71AA13
+:10BB4000A8EB9BD7FFA2DD8FF6B77F2189F7C34211
+:10BB5000BC71642FAEB39FEB6DB7D4FCEB3F605C60
+:10BB6000C756A36741B702ACE7F6DEF955A86B33B9
+:10BB70004CC939A2F28F18E7712E36596AA210CF3C
+:10BB8000BFFE13B65FC898DD04E51F121C9F254059
+:10BB90003FDF07C5B9C038C25FE59009A13F6BFF21
+:10BBA000FFF83FEEFF34EAB5CEFAFF87CC476312C9
+:10BBB000EDE7701C4C6F4B473A8C58DC5D8C82F77C
+:10BBC000A7AD122CC847D3970CCC47FE18C46C14F1
+:10BBD00027BD3F923D60EFC02FEB96A893FD0BC9A8
+:10BBE000780F8CE70CB81CE84F144B8CF8B2B841B6
+:10BBF0007039290E6D0B1B0BF6BB54E6DBE2E5D565
+:10BC0000C605D0AEBC3B8F9731178F9799E17F283F
+:10BC100047736A37ECA570A37899E26397D0EF0574
+:10BC2000D699B3A57D3C7601C699771A2D6837CA97
+:10BC3000EB02E2B90171B3C0789925518EC75A99C8
+:10BC400095C7B9434AFE8ADF63619218756DBC28B7
+:10BC5000F1598949DD108FA3C4B4705CC75C684A90
+:10BC60000E67584A52376CE7005A344329E81D439F
+:10BC7000F039E0D38974F55607BB36C2B88E803DE3
+:10BC8000913270408E21468C47FEAD375B2910D52E
+:10BC9000C80FABD824925FEF59FCAF6518C79E154B
+:10BCA000AFA775C0348CB9E3F8DEEEEA720AD42F80
+:10BCB000E1DDFB9A407157279B1F8B71DDC07D141E
+:10BCC000FBD2E871D948A7E55D079990564EDB177E
+:10BCD00049312AFA2CA921BC16C74672FAEC3490D5
+:10BCE0005F0BF4A946FACC72198EA9F17C895D36F6
+:10BCF000E27E4CF1F2F344AFD97E7A69DA95D73619
+:10BD0000125D814E9AE71595279438FAB1ABD12B85
+:10BD10003F805E183FBF072B1745927E285AEC4E96
+:10BD2000AE54F169E0BE44D28CA1E1769087821EC8
+:10BD30009C1E4C6F8D417A7EB72A8BE81548A782EE
+:10BD40009FA6133DD8DF42D96618CFFD89EC810943
+:10BD5000F0FC0139FE7A7FCDE8028C974F4DE4EB81
+:10BD6000934F61FD6983F5E7812A33B3816AFEACA5
+:10BD7000CA42F0E755B104FFB54AA2F2CBAA542A51
+:10BD80008F1959699D4ABE80018C38BE192857D138
+:10BD9000582AEBC3876331EE5EF0D367593A52A954
+:10BDA0006F8E1FD51BD7178004157E261706932F7D
+:10BDB000ADC01E83253F16F5C70AC1BA19E96A1F2F
+:10BDC000A669CF5233FC30DA2F3DE727E08B8DC8D0
+:10BDD0007FF78E89D4B49FB4BCA7065E9428D1F8AF
+:10BDE000C617246A9EDF57D45F034FF3C17A1E3E05
+:10BDF000952415E89CD0FFC54F0CC4CF172B877432
+:10BE00005BC061E2BB40FC1F333A298EE0DC68B2C4
+:10BE1000A2FEFB3688F3F7B79F8BAE1A5AF73A2982
+:10BE2000EE72C96C91709DF2C874671CD63F120CFB
+:10BE30002EF940C497C8307EC05E3191FE9CBE563C
+:10BE4000604E94112FA3F5F2C32F9B689E33D68AC0
+:10BE5000CC91417C1287ED1F8E96A8BFFB13A53AAB
+:10BE6000E467EF66937523D44EF7C8EF0B83681F22
+:10BE7000A47CFE5F0FEB511E529AD371AD5514EFA7
+:10BE80008E463DD8BAC940FB5EE5E286921020D1CD
+:10BE90009C27DE0CCB9148FC08BFA70E446FC0F96D
+:10BEA000FBE7EBA2B8C8377DEC1B13419F9E2A71BC
+:10BEB000A5D33A79118FC7B7C70B233DE5D4854980
+:10BEC0009B71BED31D432C696A7BC8F7FDA61BACD2
+:10BED00031D634E4FECCEEA8078EAD321460DC051A
+:10BEE000F4FE38C4D3B1DA48DD4A5A546D23FE2A31
+:10BEF000D64B46F5778B5789366A0FFA7D3CDAEBDD
+:10BF0000D5A2830D41B896FA772E171CB8EF94C4CA
+:10BF1000B2BB21DF3E346F48379CC7D44EF619CFF1
+:10BF200082CC3854FB58B3778976177E2FD3A32F52
+:10BF30001CA01E3F8F03253996F79A8F747A23C869
+:10BF4000BA5242BD9A188EEBD4932D6037E01BB3E2
+:10BF50006A1AD32560BDB28776101D4AC7D5A5B829
+:10BF6000E1F901B3E313C4E3B7DDEB9E1E8671A2D2
+:10BF70008617E39C680717F2FDB5D9AFCCEAA3F6A4
+:10BF8000E7DBFB132C56978D853B4600BC38249687
+:10BF90008FF89DC2EAE4F8858BC627A1D2057C58AC
+:10BFA000CAF8FEDB749D75EA679988FE500BD2458E
+:10BFB000E9EFA881C7B9FE21CBB362877B24713F2B
+:10BFC0006BBA8ECB1DDB2D109F02C1BE4852D9CB60
+:10BFD0000AB68AEC656C4F91E1BEDDD9C408592FD1
+:10BFE00070FB3707ED1FEE0B5B04928FB22D269787
+:10BFF0000BF82B3589CBE76CE36B4F0FC2E6F1955D
+:10C0000046FCCEAC7A813D074D4F195C25CDB82F4B
+:10C0100065D9B02482DE33585DC8A7B27E3783422B
+:10C0200040BD3013FF09F5E56B04979BF8C54E76CC
+:10C030006806C64D70FD8F7A5EA547DAE9F700BD48
+:10C04000FE200BD8D7AFD5DA177B70A819C7397B7C
+:10C050000DF76BFDE311D915C05589C3B5771C8D5C
+:10C0600057A0B848E0F767E2F870BC303EB7F5C6B5
+:10C07000C75362E5725A562BB85C1D8C4FC16B7862
+:10C080002E93D03ECFD924B8901F4745CD23FCCE68
+:10C0900006FC46225E9DF6B07B002E014672517C66
+:10C0A00085E3BF623DC73FD0F92F6ABBFB4D94D7F4
+:10C0B0008878FD06ECA713F7032BBF27BAEF05FA24
+:10C0C000A2FCCE7AC365C48DC8D3AC362C04F97EED
+:10C0D000ED81BDB82CF866CD9B31B87E2D8A7027D6
+:10C0E000EB406F45B2E8270B6EF1F35FA0BD6E67C2
+:10C0F0009703F0E36476B243EDF0645ED58CFBDE2B
+:10C10000EDE827C7C51EC47F017E1EDC24DA82D27B
+:10C1100035EDE4F3084EC25BA9D34B7E4229CCB384
+:10C12000C6824F9DF9889707AD8CF4EE8D8E3770DF
+:10C130009C4C2C22FEC4B81EFA21FFEE7803FD8F22
+:10C14000494957F73F02F548A0FFF195C1A65B8C1E
+:10C150007EDF01BE2F7E51EFEE8DF27B312AC10AC8
+:10C160002DFC7A347A5037D4F38A1E2D91ED96D275
+:10C17000EF8368AF003EBEF6CD30A4BB42FF9968A6
+:10C1800027D2FC76E291E9D03F7CEF911D41D4FFAC
+:10C1900099B160A7A0CFA2E73F0A632AFDF7781FF5
+:10C1A000C7FC24D4278A5D1337C45980BF147D7916
+:10C1B000AD7557A7F30A099857A8765EC538AF0C36
+:10C1C0007F7FD3E5797DBD9CCFE7E82A3EBF19ED9F
+:10C1D000E6C5EDFE232F9AAC4EF20BDCD12887DFAB
+:10C1E000BE21B21AA22FF71B2E99819F0662FC6610
+:10C1F00015D9F593D14CC2B84EA7F67BB589FC8210
+:10C2000059DBF97EEB29617837DAF8FFC01DF62893
+:10C21000CAF53691A11DF28FA7CD6E3F9BA4B6DB68
+:10C22000D789378CB3A23D9B0BA843BE9FDBD08D33
+:10C23000E1399755C3599D48FBF01ED263C04214A3
+:10C240009F063F5C136F3031ABD98C74EA24FEFA41
+:10C25000CFE4F353E7133EBC29887FE5FB155DDC93
+:10C26000866EE8D7BC21905F53FEF0F0B0E10CBFC2
+:10C27000C3E3663B92B89D7A07F51CCC4BB0555290
+:10C280005C0C7C1ACBEF705CEB797C98BDCFEA102C
+:10C29000BF0853FC58C7E7214816563488C7E5CD78
+:10C2A00068D7427464D702F17042FE4EB9A823FFEA
+:10C2B000B7CCC8FDE073023FFFF1916C1F3F4AE22B
+:10C2C000EBCC4F92783CE11CFA81D0EFB95B4CAEDD
+:10C2D0006A01DD563DAD93F5B92617FA337A7388B6
+:10C2E0005B4C47F4EACFB6C933E06B2A6B36203D8E
+:10C2F000C765CFDB82F339DC8359C4AE546DC77D8B
+:10C300008429A41918DB6FF8EA438C473AA1AD08D9
+:10C310006B8529D9277A63FBF508C3FC0F07D57D08
+:10C32000887196C3F17A86FB02CE5D26B2FF861134
+:10C330009EDE14A7ECC258CD408CC7EC598A7CB461
+:10C34000373632D502ED1FD077B18A5CFF8C3C8F37
+:10C35000E32D15F8FECD124F16D2E766B6C472DC97
+:10C360004C5B0BF55722AFC63F7A765CE10318535E
+:10C37000D908F8C750C6192B9BF0A98101AF045FFB
+:10C38000DEF4C88435B9B869220D403A972578F5AE
+:10C39000B89FE215987723E0E1EE6CAFDE86F4B249
+:10C3A000B1BABB807FDDFB9880DF4111C0EFDEE3D7
+:10C3B0004E18857860A9120B87FABBF412C1BD0A2A
+:10C3C000588428EF1B601CEBE03081E8A0334B065B
+:10C3D0009CB7BD401884FBA2658BAF6F9C61C9D52B
+:10C3E00034CE329D8EAF671FE5EBD929CE23A3C88B
+:10C3F0004FCA6502F26145449D81D6D1202F38FE97
+:10C4000081D08D1A7F53F41E3EBE52185F0ECA456E
+:10C4100012F1F17D9502F99315C68EE31A3D9295BE
+:10C42000759745C2F673E05FC8D7731A7624E3F7B1
+:10C4300056099C0FE6287CB6552B97B9C9ECAA7C07
+:10C440009D93CCF93A2799F37572DBF7EAC8EECEE3
+:10C4500069F8E820AE2B3BEBBFDCC4DC84975D269B
+:10C460008A1F083A6F12D1051109749882FE24B808
+:10C4700088439223B89F2EF36709FA1F8958F2B8B0
+:10C48000880E9427DAC3D2DA178D88B4C0F347E058
+:10C49000F8D039A0D99B029FABE22AA246EF50DC2C
+:10C4A00053307A67E078845B83ACA88FA718EB6879
+:10C4B0005D1ED8CE50CBFD2CC372EE67D1BE1AC024
+:10C4C000A655DCCF9CD2CB3B80919EB3E40BF1AC64
+:10C4D000CD2F2EE19F86E7651ABFD88471048C7B2F
+:10C4E000ADE5FEA05EF65F8B5769FD85294B54FED6
+:10C4F0002275EB2DC7F11A160553DCC584FE84CADC
+:10C500000FF8876EBC13F5B033414FE72F0D2CD0D9
+:10C510009FB0331ECFE4CFF5B29F383AD9A0D97F70
+:10C52000738E60A9888722D44389A86AECCB319E98
+:10C53000778185D662DC6C94B888E27F45D5FC5C57
+:10C540005A60FCEF42E587CF637BACC7E70BBAFCD0
+:10C550001487FB9BB02CB50BB782BFD1E5F0250744
+:10C56000CA07282AC3508C03EEFF06614117CE8408
+:10C570006CFCBEFB79ECDF69345B506F3D131C46ED
+:10C58000FD2C5C28507C788985CBDBA1AF4237A29B
+:10C590009E52E2BDCB8667ACC5734B359B1B27987B
+:10C5A0007BA37A60746E8939F7FEC506F329BC0C4B
+:10C5B0007243F047136CE1C0E71F7AA79A014FCF8F
+:10C5C00026374DD0839C9CFBBDF705845F4D3EC054
+:10C5D000E127BC7141086FFE9CC3D54A7F9F4FC0C5
+:10C5E000FECE3DCBE1E550EF84EF17A17EC3790F7E
+:10C5F0001568DDFF8AEC7F2BF19E22DDFBBC1CC1A0
+:10C60000DC683FAFD5AE3ED9FE0AFA3B62E8B150D6
+:10C61000F42FDEEE6B7B05EDF78E44FB53C948AF7C
+:10C6200016574C34C6B174AC19E90276CCD6D1BEDB
+:10C63000F42B493C4EF3568A9DDE57F005FDACFFC6
+:10C6400077FA1999C2C7A5EA67F3BFD34F78DF76A7
+:10C65000E3793D39FAC6FB9917D08FE2B781032CF5
+:10C66000A19EF2A6DAF6E1F8E6FCDA36A21EF5CFD4
+:10C670007E91F8F4BBCA1D2968F7BFDB6A8A44FBC8
+:10C6800037E7F5B7E34A308E20FB45A71BBF344A96
+:10C69000F0FE5C9FC86CA0A72B7C029573EB1B8DF2
+:10C6A000F96978AEB6D198A71A57993C4EE074FD57
+:10C6B00004951FB33F5927EBCDD554CE79FDA41E69
+:10C6C000E9394757771CCF1FB3A13CEE1538BF1D82
+:10C6D000B2DE3D8CE70D3A8803B4C8FAB9777FDB48
+:10C6E0006788B7B7509F030CE6CAD111BE7AA5F090
+:10C6F000711475E17A3EABC55AF219ADFBD27522C1
+:10C7000094830F561A8BE1F9C1C41187105FEDE3D2
+:10C71000905E1E876CE071C8A288E687C198B16EF2
+:10C720002F5D7CD20CEBB83B9F91E503450FF44B9A
+:10C7300081499197E0892373799C0BE1FF4D363C49
+:10C7400085E7089BBA34FFE233B40F2B42D94690F9
+:10C75000B3FB8784C66D83714C77860B603BD970C1
+:10C760005368CA3468D79A30BC5B0AE92746FE6131
+:10C770006B82FD02CED7131FAC036784398C3C9EBD
+:10C78000E5F8B348F12C477AB0C3D501BEBC323EC0
+:10C79000BBA5F0FD9D261D8C73108E839FEF85BF7A
+:10C7A000B86D186F5ADC4740BE53BE3F2671788C77
+:10C7B000FAFB6312ED624AB4BA7D38C3F6D73B0E7A
+:10C7C00096C2C71193C2E965CF05FE52E9FD092360
+:10C7D000833570E198486653AFEF0A7B6AE0C9453C
+:10C7E000899AF6F7CDE8AFA91F6B6ACEACBC017F82
+:10C7F0005F0C4B0DA7F57F165F871C6AB8F4C51454
+:10C80000F46337895601E6356BD7E62F8651EF1270
+:10C81000C5B94E3589648FC0BD35AAF74FCEB06615
+:10C820003A77ACEFBA84ECDF9C587EBE7B964BBB6C
+:10C83000FFA1C4E53BDA37417B5686E7623ADA3737
+:10C84000F1C7E3AFBA7F929D22AF8707B1417C3D2C
+:10C85000DCBA1766CAF2763612BD6AF6895664D516
+:10C860009ADE0213609CB7D79B5C4130EE336F1F9A
+:10C87000314AAAFD930A5F35062DE0BD23463C4FA1
+:10C8800075305922FACD6D386F64C017B737CC2395
+:10C89000B96E6E744445A3FD027F757B26F2575D29
+:10C8A00026DABF269DC58EFB6173968FA63873B8B6
+:10C8B0006F0A9565B5A3A9DF72DF4482E7FA8209A2
+:10C8C000FE546CAE3F80FD3C136E417B5EAE776ED6
+:10C8D00045BA944BC119B85F35B7FEC0C55FA21DFC
+:10C8E000B5F07B1D63C5BF6462FDD83E165D4D5734
+:10C8F0001C6F10F5D33CE2EF9968970A705D00CF8A
+:10C90000CBB6E53850EE87D7845A50EE453C4FD62B
+:10C91000019FCE48E1FE9EC1C3C73BCA379EFA5372
+:10C92000EA67A72450BD021BA237E9517F28F330E4
+:10C9300080C1C7F20E5F7F2A2BEAC7EBF15CFC9F38
+:10C94000535F8C423C41FB102C93460E233DF35D1C
+:10C95000E59070D681DE524A93AC87A7A01E86FE72
+:10C96000EE4DB555A11C8E5BE4D19B518F86982D61
+:10C97000B8FF312E7BA054A29A8FF8FEBDB892006A
+:10C980005FC56B40BB3D054AB5DE7EA013FBB234EC
+:10C9900045D1DBD54467C50EB12D4F325C874DE5DF
+:10C9A00067B5DAE46ABE2CD7CAFBCD02F7079CDB79
+:10C9B000795C7F7EAA632DEA91E6E16CF236D2A71C
+:10C9C000CD71E3437FBEF187E99B89CE611649872C
+:10C9D000FB0A4AFDF36DF3E0F27DAD79AC94DB7FA9
+:10C9E0002AB285C8179FDE765BB30DFA6D7C2C23C7
+:10C9F0004354D9A9D753F8F94766F15E267DB13B78
+:10CA000058423D3016F71E32FD7E3F9E87C4B84621
+:10CA1000C56ED3463C0F561106EB7CF8FEF8FE8E31
+:10CA2000D7917E8DEFE55CC47B34365C98819CDBCE
+:10CA30001A865CC473F63633681B2BFA41B63F91F5
+:10CA4000BEED64BCD7D2674923E744A13FF11D0C7A
+:10CA500009ED2DD8FDCC160EDB115F8EE55CFE1CBA
+:10CA6000B21C4E93F9B75896C3697A2E870FAC095A
+:10CA7000B760BCB378913000CFCB3129D48A2AC0BB
+:10CA8000807C9981FCC9F9B2CCD75596E778B91F5B
+:10CA9000CEFF81F239D71749ED1439FD53AAE310BF
+:10CAA000B72BCD990B615C77805CA3DE732CEE9E77
+:10CAB0008972E2E713A305F909F824B644C50735DE
+:10CAC0008D3FE8914F0CB902F18909CA3C151FD975
+:10CAD000DBFC134B7E0CFA554BE2752B99BFFEEB3A
+:10CAE00014659FFCFAF8FD53B97D7108F81114FF25
+:10CAF0000963185FBB1025519C74FE0A1824A060BE
+:10CB0000BEC19D8C7198F9F382280E56D252B92C71
+:10CB1000546A4FAF7B7DE9B4BF3CD19744E5C14433
+:10CB20008717E5659A6F928CC7F4EBDA9FCBB2F169
+:10CB3000B89BC165B26E88C7B89B43A4FDB8DECC74
+:10CB4000F214D929653F8EC7DD309E87F1BDC0FD47
+:10CB5000358CC3E17ADA14A5D3EC13B68BC70DD7A5
+:10CB6000EEA79535FE65B00EEA4FC5DB282EF74DD2
+:10CB70001F47505F98C7EC09AED70DEA7D36198F75
+:10CB8000757A7732DAD1BA4A8E9FBA556201ED379B
+:10CB900031163C5E755EF75A7C3CDB9748F851ECE9
+:10CBA0008BA2B77754D1A1CF36FD7D2DBB532EF389
+:10CBB0007B39F2BBB5BD9D51F835909F15FD6C8852
+:10CBC0006E213D7407BC82FE83A2AF0BF286E5A204
+:10CBD0009D1FF67262FD3B30FFD854470EE2E5B66A
+:10CBE000577B67AE03F80EBD4B6F09B91E7DF88306
+:10CBF00081F4E1A2F18CF421946A7D68E8C40FBF4E
+:10CC0000B5EF8DF1779ADC1EFC58EE1F82BE56F709
+:10CC1000373F75C4F8BED074525F6E277FAE717710
+:10CC2000A6C727F5BD313D9E278FFF5A7A7C565FF8
+:10CC3000AEC703F5366863D2DBE776F5A338D96172
+:10CC4000067A1EED5943B0B4395E75CEBD4BB84B74
+:10CC5000ADD77BF79F3E0BE97A1D7A7D36B6FB7721
+:10CC6000F57AFEF837C8AF823FFB5DB7C2FAE3370B
+:10CC7000B0BE43F85358DFC5B79787403908E47B07
+:10CC8000588FD41F80F1353DDD87E20E2007C4F7B1
+:10CC9000E5C0F728078ABCCCAD1F188EFB06EC1345
+:10CCA00091A1FE0F948382BC57F518A7423D8EF8E0
+:10CCB000DA03328F7A26D04EFCD8D7F12CF28F22AD
+:10CCC0000F8A1C5C9B8FDE36E0BAD450769EEB79DF
+:10CCD00028D57ABE337FE6851BE4FF55D7C93F6F61
+:10CCE000FCFCFCF3C675F2CFB6FF847F9246BE4BC8
+:10CCF000FC83FA13D76F777E6C0D5FC0F987CE2562
+:10CD0000023F6462DCB969706F2BC669EEBCC2FD7C
+:10CD10007AD0E9E4D707FAD55364FDF7801C2738A9
+:10CD2000986AFFBC2F9757F2DB8727060F447B7565
+:10CD3000BDFEDE94A84A6683E70F40A9D61326A459
+:10CD40005B07FEFADF6E90BE4DD749DFD37DFF63F0
+:10CD50003FEF52DFEBF0F3926CE68988CFEFDC7A9D
+:10CD60008678BAD67AC0B096E3B9CD5F77EB15BBBB
+:10CD700019897613F8E39FFF097F8CCDABBB68065A
+:10CD8000BA466D3116EAA1FD243C6B41F10CD31A71
+:10CD90005B12EA1BA6EC0B50BCE35351869DE69652
+:10CDA00091308E3B9F62FE7D03A81F951BDE161FF0
+:10CDB0001198BF7DE41643CB2A8A3FF0F32ACCE1D9
+:10CDC000D1F37D3219CE043854056707C0EB79FBE7
+:10CDD00030BD87F1731FF27359FF8CB3F07D01FFF3
+:10CDE0007E9E37BF2BFA7FF58205F717EECB3D67A6
+:10CDF000C478CED83CCFDE9ED02E654B7861483FBC
+:10CE0000785E2FD07807A7765BE34CA2235B363C95
+:10CE10006F5896CDF74D4C758DF9B60EF87070AA17
+:10CE2000D64EE19F3E86E263F467AA13983193F7EA
+:10CE300093107F7DEF23FDE8FD047ADF6D8ABAFE53
+:10CE4000F7EFC9653657077C345269877161A57F52
+:10CE5000A0C9C43AC1D651DC664C2A9797669DAEEC
+:10CE60009C019E0A53FBAFC1B8D728C6F96252EAAB
+:10CE70004D854E1E4762B680F95E6DBC433B98AF50
+:10CE8000A47DDF7D357CD95215B957DE97E95FAABD
+:10CE9000E59370BDFD83EF601CE1518205FDD4B9BF
+:10CEA000F6A0552C1CE92EF335CB2AB4E5C2FC8242
+:10CEB00098268ED7C6D76C70E1C834F9DE3ED567A8
+:10CEC000AF41FADB756DED399F37086DEFA7EA19B1
+:10CED0007E82DEAF4C1DB206E37E400FAA2738E902
+:10CEE0002A7C5E1700E706C805E330C925EA65C05D
+:10CEF0004F7207FBB74FC8F83D23F0F34DCD23B871
+:10CF00003FD79CC0CBADA9DC7F5B23E371BDDCBE0A
+:10CF1000B98B0A0FBDFC74863F37AE0754F3263C2D
+:10CF2000DD1BA5CC7B52E118985773041B20009F92
+:10CF3000BC943A61CD92DEFEF7B7A44E223EF1F7E3
+:10CF400057D88276FC5E194F5B53EF6EC17A3C7204
+:10CF500082F2569ECDF75F4DF5073A94B705EDF98D
+:10CF6000C789F915CA8991F03DC166C8E4FD2474EA
+:10CF7000809F5FB57FDF16F03E3344DDC8FB327D16
+:10CF8000C604D0AF20807E2303E0222DECF783A1DE
+:10CF900067F09F8A77AE5E1A83F1B32D02DDB1028E
+:10CFA000FD6C14E079E396070A43703D2A4A869E99
+:10CFB000D0F6C32DD35ACCA0BFC6A3FE227D5C4CB5
+:10CFC000FA7A22CA39C1D30B6D3723DF542E8D85EF
+:10CFD000F61F6F99B106EFBDDEB764B50191FEE9AA
+:10CFE0009692357AE8F7DECC3FEDC5FEF4D5A52D57
+:10CFF0006384ABF0696DC03CD607C0CE80F66BAEE3
+:10D00000A1CF9704BCBF28A07E5500BC36005EAE01
+:10D010007D7FDA0CBE7F390DE88788BB96BC7C9398
+:10D02000DAE617B4D92F01EDD9C75A7EBFB386C34C
+:10D0300067531F295C1EA282B72C2854F3AF41B658
+:10D040001753A2ECB68EF8F75067FC931A68D79C7A
+:10D050009A73898719D3D8DF3DA2166E1495F12EE5
+:10D060006D79384DB51FC89614E23E51E7FB158B1C
+:10D070000B71BFE2CEDF29F58B0B6DAAF929EDF319
+:10D080007FBC22E2F7F42F57176EA2FD3F79FF2EE7
+:10D090008297B75DBE128674C9C7F3A358DFC59DDA
+:10D0A0003C5F6DE7595D0ACEAFF1317EDFD05903A9
+:10D0B000F400392F6656DAFF6E0C0F5FF812B4DFFA
+:10D0C000F398B810EDD7E1859174DEA8B01FF7C7CB
+:10D0D000F684F7897910E0C6E0078C18576D7C7CE0
+:10D0E0001495EF8BB6655E407EFCCBB564C71B83A1
+:10D0F000C3092FBDFBAD2AC42D59A99F44787444A0
+:10D10000586276A21FBAD2C070FF8931EB0BC427D8
+:10D110004F98C84F9D56DD9FF67B8A7F3F3EBF3BB1
+:10D12000B42B5E6AA0F83FFCD17D0CC7CA5146AC57
+:10D130009FB1442E9DB753F9DE4F6F7E9C4EFB3A54
+:10D14000229DDBD9ED8B380E92CCBE760EA0FB0A69
+:10D1500047E5FC2A6FF773A4F583797CDD9A44F9DF
+:10D160005298450A9B807EDB4DB601FDA2FDEDDEA7
+:10D17000FB49A4FDAA775B8B63906E43FA717ED95D
+:10D18000ED2B8E2956D9F592337AC2F37B46E961AD
+:10D19000D41BEF75E92D38496EEB2231CE3A43F6B8
+:10D1A0009B814F16BED9011F26F513A9DF63A68503
+:10D1B00078169635FE263A17C7A5BC97D5E2A8C1C2
+:10D1C0007C31865ED220B57F7C6BF2883C9C879F49
+:10D1D000BFFE48FA9CFC6380C7BDFCE21A27DABC9C
+:10D1E0003DE0D7E338A26CF958AF9CC763B175290D
+:10D1F000EAB882DF0F5D2CCB3F6F77080F07C3F7CC
+:10D200000F6D0DA2735F879C7F0F55FBC78A7CCC87
+:10D210000CFBD5E1665A17874B421CF08DBEEAF82D
+:10D22000A3F05EC9F306D29B25CF472FF2623DD013
+:10D2300013B70C03BFBBA51F3F0FD0B97CD407C8E1
+:10D2400047FD55E5A3F4E5370B378574241F5531A9
+:10D25000C847F9CF1BE87C755197CA4918472CD2AB
+:10D26000DDCC6A607C239EFF450CEEB3CC7CDE44B3
+:10D2700074F584861EE7F3EA138FF36AB33FFDB8B3
+:10D28000BEF254E790BD1075E09D81FE16971968B7
+:10D290003D22C61849EF8961565EDF85C52F06BB62
+:10D2A000BC34345B42FA6E4679C8A27A09F92C2F55
+:10D2B0007CF21D78AEE5F0C244DA073B99C9F7C1AC
+:10D2C000663DFA6218FA9F871EE6E7BB6763BE1DDC
+:10D2D0005CE7FE9BFB5E1572BE9DFFAB7DAF67FA00
+:10D2E00005EE7BF173A07B16666472BC30C984784E
+:10D2F0008A1B4878B9DDCCA420C08B18C15250FFDE
+:10D3000028FB5EE22FB97E127502ADD38F55392905
+:10D310007F415E98993FFF25BFB7273E3D9ED13E96
+:10D32000585425ED8345C8789D26303BCACFD1207F
+:10D330006BDCBC34E4BF20A2E7CC17667DF16C2621
+:10D34000D26D6C94269E80FC17ED7FFF44F52D3442
+:10D35000BE1302B3A0BDCFFB43DF91489F46D1F17E
+:10D36000F4BDA4378369FF9C593C4F0C01786635A6
+:10D37000ACB319F24DF7B884347F3F33173F968230
+:10D38000F4CEFB43901BCFDFCC5812B416CF619480
+:10D3900035F07BDED3567C47E77159BCBE12E39C67
+:10D3A0005F2F09E2E7D4EB8710FF4CD3F1732E2CEB
+:10D3B000CE48F1A5B21019EE954DB0EAFE9211E9F2
+:10D3C000A1DCBFF918F50A7CFFB4820FF41B51EF02
+:10D3D0002AE7E859A584F25FA4133A3CE7F5553FE4
+:10D3E000EE9F4E8BB3D279D1F2DF9AAC8BE3399DAD
+:10D3F00045559EB9729D377F2DF6AB63D2760BAE45
+:10D400001F9A4B70BDCDEAFB521E820A3DD31B23EF
+:10D41000E0B9C4F599329E0A69FCEDC44F7A7650A2
+:10D420001F81786CFEA219F96371A8847191F2AE24
+:10D430005607F51B6AB6703B217F17C79E887CE0B4
+:10D440003346201F7C21E84C3CFF804D07F5E71850
+:10D45000AF6FFBCE921569346FB34537A23BF2DD57
+:10D46000F9FCB5F0DEED4C4AE88EF7C456444E9A0E
+:10D470008CF5AF89A49740987E9B8DFEDE6B62068B
+:10D48000AE53A7ADD843F39BF3C640BC41C0A6BD85
+:10D49000FE19D9A739327F79E4736BC500BF01A5A6
+:10D4A000FE266E271C22ABAC2358D0EC572AF5E59C
+:10D4B0002B0C448FF2A526A27379F55FA9DFF2D079
+:10D4C000E618A447F97603E5EF08BD49A2F6C5D5ED
+:10D4D000BD730FC2B88B0DE116011E9539C71A1125
+:10D4E0002EAB150856BE57BEE2F3185D1AEF0F4B70
+:10D4F000938EEFB3FAFB8D8E437B767A6B64DC34CC
+:10D5000015DD4F2FD91186FBCE4783DCC978CED7E6
+:10D510003B2FC88AE70A9578DAE925C9FC3E90A531
+:10D520003914F7AB673C9C188176EEB0C56DC4FA30
+:10D53000C375F178648ED92C965C846DFA9B093E94
+:10D540002D9F23A13FCC1F2870BE29DBBAC79800AE
+:10D55000DF1B24E3E7CC6B47F70E457C001F5950D7
+:10D56000FFC435A7A01D2ED735A7F444FABC2290DE
+:10D57000BF00EB531BE61F998B7C3508F4A1CC57F9
+:10D5800073EB772C40F92C7FEB643EE2F5CC5866C8
+:10D59000C4F858B93C7F583F7EA087F6E5DB36E4F7
+:10D5A00033FEFE07C8778ABD07788901E026238706
+:10D5B000336EE2FCD364F450DEBBA6498CD1FE99F5
+:10D5C0009E8DC47640797E0F4014E5FB6995B113BA
+:10D5D00078DE3DA7FAFCDC5CAC4FF3D777C6378525
+:10D5E000325F14579BC82E15CA78F1ACD81E867CC2
+:10D5F00071E6B53D7B87A25C6C132C4C2D0F8A1C09
+:10D60000C679793DE0EF49C4DFB6F3F998876276D1
+:10D610006BA8843454F0A4C89B82970AC6F1A0E09A
+:10D62000A5422FE349AEBF5BC64319F3527FAC75E9
+:10D6300080B419FB7FEB07DA6F3B338D09FC9C301C
+:10D64000CF8BA6CCCF11A1DDDF5F26CF6FFA4DDCEB
+:10D650006E9659B85D2C8B6252F540E2339B51C9EE
+:10D660002F094DCEBC714433FEE7653968A337CE30
+:10D6700003C6E9D1F17B8281FAEB51197F47AAA752
+:10D68000B851AFCC76423F99280F96A9B8CFC95E62
+:10D690001765FD0D32A9FA6EDEAB47880F41774959
+:10D6A00011B066316C8171A0FFD5DA9BE28579DD1E
+:10D6B0003C34EFCD632C4C07FAE488E009DD89F6B1
+:10D6C000E05191F494324E9BF363A287AD8ECB2749
+:10D6D000F20BC60715390D1CEF3279BC269DD58398
+:10D6E000E782D96281EEAF898BCF841EE4F68E2269
+:10D6F00089FEFE6FF900F7236D17C324816AAC7AA7
+:10D700006C37F7625802DAEF2372DCE1C8D21D6190
+:10D71000C52A3AACEBEC3BCB864848FFBC90838FE4
+:10D72000A11C3D759320F3BF75E442D40797C22432
+:10D730003C2FD514E14C433FAA49C796B308CE8786
+:10D74000FA183FFE405E087F502F3D65F1CBA532B1
+:10D750006EA09B1BE906ED6D5C8EACB48F31378AF1
+:10D76000EF8B5E5B9E323CA49FAA056963A6BF9DBA
+:10D77000722FEF7179DE2423317E7B80FC89F6CE17
+:10D7800024E7310ACC837A7BAFAE7188BF8A10B3AD
+:10D790000E977081F581B07F3D55A9473F9F2D8938
+:10D7A000DDABBE977634C849F7CFBCDD45B611E88E
+:10D7B000513DEF237E9EB781DFDB52EC34FCAD6A36
+:10D7C000E33F78AF34F37C3EEAD73FE698E85E5318
+:10D7D0004C7F7EDEE514AB330E47FBFF6D737E9806
+:10D7E000E45F9FDC72D12D8693BF10AF591F94B5B3
+:10D7F0007E40F25CCE9AE93EF6B4159F8D1D82F410
+:10D800007ED940E70766D4C6939D3BB9697A06CEB8
+:10D8100077DAD26482676D7E90C32B78FEC3694B42
+:10D82000B35E42FFEB68902D1FF9D9BB5AB0E0FA06
+:10D830006AD8E6AC45F741FDB0D03E5D71DC873675
+:10D840001D1D8B743FB45024FD64DBF4D424ACB7AD
+:10D85000ED14F1C618AC672C8B30AF29D3875BD0A1
+:10D860002F50CE17D618B8BE3D2FEB87936D25E706
+:10D87000D3BC9A9A14F497BC1BC01EE1BEB7D15B0F
+:10D8800042E7BB058B7523F0CBB782936066B1246A
+:10D8900054E7E07D96F5941FE75CB2C9827EF2FD05
+:10D8A000266645BFF6FEF77A0FC2A5824D5E578DFC
+:10D8B0008DE4DF55F0A57CDF2BF33D135795D0BEEB
+:10D8C00043A49480FAAD493E377E541EEFC9252FFC
+:10D8D0004F42BFE0E496E408A6C2FB49394FD32C7F
+:10D8E000D083DB3A58EFFD7893127770D1774AE511
+:10D8F00078E03E436D2FCCFB1978BFEBC486203314
+:10D90000E6E70DBCE775C2C0ED47BBFB5E3BB570FB
+:10D91000609EDBC0F12865BBFBFFFD433AF4E315D5
+:10D92000390B7CBFDD7DF2A4EB3B5F8579C9F0BE8E
+:10D9300077D34D8CC63932F8C737515F97D49A2CBC
+:10D9400078FFFE589044EB2167169336A39D314B28
+:10D95000E1B89E3FB62F83CEFF957CC548AE4AEA1C
+:10D960004517A62AFE6075DFDFE502FC60BDC18AAF
+:10D97000EF9F5CB37A1217336D9E856CC6E57326F4
+:10D98000AC93DC16FFBA2870BD347BED1B748FF0AE
+:10D99000E75A2F2971A4407CDFDA5FCE4FDAC9FD48
+:10D9A000B9F7806DB207B5C7776B9583D64567AB7E
+:10D9B0004AA9CCA9DB90D753C2FB14477E3B0CE5A8
+:10D9C00026349CE221AD5595B489777667C665BC4F
+:10D9D0001FFA6E48B805F5C5D9AA85F2E502994F38
+:10D9E00064BEBCA5BE51ECC9A87DC33068BF3B2452
+:10D9F0009CEEBA24D9B2C3D1CE2B740DBCDFACCC13
+:10DA0000EFD4A39CAECA784F6D991E867E67E3BAA9
+:10DA1000C8869C283C9E1B6E417F7BA67CFEE5F859
+:10DA20005AAE6FBE3587BF3406CFCFAC9F1883EB9D
+:10DA3000BA070D5EA315FAB5EE1A1F8671BC6FF416
+:10DA40009E30BC6FFC0DB477A39DD0BB44D4734310
+:10DA50000B18EDE30D75EB99144F5BE6C41739AD68
+:10DA60007A17D2F5B4FBE29E2BC847AD3A8A77010C
+:10DA700066F65C81F6D6D03E14277CF06DBEDE647F
+:10DA80003F76E1F501F7169FE9CFFD9613EBDF1C1A
+:10DA900047EBF34D060B8EF3ECA6CF63F01CCE6C78
+:10DAA000C6CFD77FBB45A079CC067E0C8A47FDC088
+:10DAB000E3A0B341EF9B85F67C98B7A59AF8703642
+:10DAC000F021E6F59E6DE3F99867633E6689B5CB74
+:10DAD000FFD155E6BB39C077787FF7E7CEFBF13B46
+:10DAE000850F03E45EA1BB821785FE7E3E649AFC2F
+:10DAF0008211750387F7647E7DA0DCEF607ACF2A00
+:10DB0000BCA7B1400CADC57C55FBF5957FA0BC2DE5
+:10DB10004E3DDB4CF69CA562BEBC05E24D568C0723
+:10DB2000D6182BDBF2BA607D605E173184BF3F1ED2
+:10DB3000F313C37CBBA6C5D3F72658ACA310DD8670
+:10DB4000280FC505C43C9D8DEEE5D59868DD1CA861
+:10DB500087EA64FADE95C6F5D0FFF4E7E7B5957B72
+:10DB60007F4A099AB137F2FBF8E0884B1234D9D5D5
+:10DB7000FFD0DDB84F3B7E58C42F12E1FB7B5F3DE9
+:10DB8000CAE18C88ED090037F5FFFA6EBCC731FE9B
+:10DB9000E6882C03FA01D5C7EE1E09F0F1FEB67730
+:10DBA000FBABBEA3F40BCF77E3F37FC439DEEF4FBB
+:10DBB000CFBD2548EF734218CFF796E4A538A8F2F9
+:10DBC000DE01811D7E57F0C31E038BC3BC06FF839D
+:10DBD000BA3BBAF3B27B9AED63FE7DED73A4D077C6
+:10DBE000B8CE94F77F7466C988FE9FDD6AB4F2FCF4
+:10DBF0008ACC6E06BFEA2E997F8BCD974792FDADFA
+:10DC0000645613263059AEBD8FD5CF7F6F6FFD8D13
+:10DC1000DCDB634E9E87AF46CEC3D7D93D4AA1E138
+:10DC2000A31FD0BF0CBC3F95F149F35BC827E3802D
+:10DC3000AFD05E643673F82E994FCA778CA57CCF2F
+:10DC4000F30F185CE827CC92FDB12447172641BB9F
+:10DC50004B20BFA8175AC7B953507F9CA862B5493B
+:10DC6000A0B00ACC8E4BFD014F4DF11F515EB41395
+:10DC7000EB6BC2D0EF3903EB8931D04599ECDFB3C0
+:10DC8000CBA2FB36F483E3FB6D5CA9E2B79F643E55
+:10DC90006B8D77C7E1FAC6196FE2F91A2FEFA13C35
+:10DCA000CF0509A3B3308EB4BF6A273B9AEC7FAF90
+:10DCB000B3FB284375230C69AA7DC971FA8ECF691D
+:10DCC0009C51F2696EE2F6DBA4AFA53C5A40CACA89
+:10DCD0006A82ED14578A451EC5F8B0F410C1CB66B0
+:10DCE000310BDD63F5EFD3D17D5085FE36EB959199
+:10DCF000D86E1CD01FF58DCEECD5236C2FE0E753EA
+:10DD0000FA01E1509F28F41F252EFA2DD261BE7C26
+:10DD10008F6BBE50C9618399CEB906EA478C6B16EA
+:10DD200091DE74EECD417F0CF424E55590F5A2040C
+:10DD3000FFA3BC48D91B8CD4ECDA7991F6E6FC073A
+:10DD4000FA31234D9B475CA193E25F754627454F0F
+:10DD500002BD86A5455F3FBD943C65F39FE7F1CECC
+:10DD6000F9CF4F8F1D44780389437F28ED4F44C47A
+:10DD700099F21CD8FA48E263C308BB84FA76ECCE69
+:10DD80009E4C8247B3760A74BE75CCCE4882C37C63
+:10DD9000DD795E25D9DE8FFD63B711189F3CF9D27E
+:10DDA000DF1FC6BCF7637EC3287EAC0B0EA17C13BD
+:10DDB000E208398F8318F221DE63BD20F1DFA1B0C4
+:10DDC000B376F9037444FF267E4E1656794E4E27DD
+:10DDD0007EEF6FFE3E6EE7E70FE7FB8217F00D6800
+:10DDE0007FA150A43C4DCF04A793FF5673B781EE9B
+:10DDF0004730A7ED2FB8AE9A2CF383291616962A32
+:10DE00007A054920AF2AFA3C1EF4DB0F1DD0BF076C
+:10DE1000D65D420FC682532334F57A67D037983FD8
+:10DE2000D6102B5A5C30FE506B0F4D7F76B1CC80F4
+:10DE3000F114E6E07EB4C25F4C6CD5D3BDF95C9EB4
+:10DE4000BFE2EEC9DA7B9286DCF323C9DEE46AFD29
+:10DE50006FFB35F236FD4AE1A77EAC9F9C979EECA6
+:10DE6000FF85167E3F4462F6B58ABCA0FE07EFE64A
+:10DE700019C4CFA42603734984BFD7B0FE82D364EC
+:10DE8000C178409B1F9E04EF45A19134139F635EB0
+:10DE900050F53C312FA81A2F9817540D635E50751A
+:10DEA0007BCC0BAAAEC7BCA0EA7ACC0BAA86312FDA
+:10DEB000A8BA3DE60555C3981754DD1EF382AA6142
+:10DEC000CC0BAA6E8F7941D5F59817545D8F7941A7
+:10DED000D530E60555B7C7BCA0EA7ACC0BAAAEC7C9
+:10DEE000BCA06A18F382AADB635E50753DE6055557
+:10DEF000D7635E50358C7941D5ED312FA81AC6BC59
+:10DF0000A0EAF69817540D635E50757BCC0BAAAE51
+:10DF1000C73CA0EA7ACCFBA98631EFA7BA7D335B78
+:10DF2000928C766C77BCE37FD268DFE95BE2E783B3
+:10DF3000F7033FA31C364DB450FEC21B5C277E9EE8
+:10DF400026EFF7C8FC7B89854CC573E89DBDAFF013
+:10DF5000E7EBB2BF01F66039F12F0BAD457FEE71F3
+:10DF6000BD8DEE4339EBF8FD44A6E77EC00251F6C5
+:10DF70007FE4BC100B4489FC00CC1DAC578DA7ABD3
+:10DF8000CDCCF42A3C4416583470B43D56D3BEDB95
+:10DF9000644953DFDD91AAA9EF596AD5C0BD2BB3FF
+:10DFA00035EDFB2CB469E0786781A67DE272BB0693
+:10DFB0004EAE9DAC69DF77AD4353DFCF55AAA9EFD5
+:10DFC000BFA552030FA85BA8697FF34EA7A67EA04A
+:10DFD0007BB9A63EA3A956036735AFD5B41F72D04F
+:10DFE000A5A9CFF16CD1D40FFBB64E03DFE2DDA9BA
+:10DFF000697F9BCFAD8187B37D9AF679E6031A7866
+:10E0000094E54B4DFBDB638F68EA474B2735F5659D
+:10E01000A7B97FCF6A607D8071CA109E5F63AE9B97
+:10E02000D5A17F7167EA794D7B4314AC17807FCA15
+:10E03000411FA2DFF77D9738CAC7CC2AC3AC78EF5F
+:10E04000DB39A2F20FEA7BDE63AD3F68BEFF4C70A6
+:10E05000983B88D61766B2B7230624907D6CCB27F1
+:10E06000A2DC67675E161B4521212FFA4702FEC21C
+:10E0700012C061369E171AFC20F29F2CE017A1BF38
+:10E08000D9B62ED2C5C7A35D0EF6FBC5BDAEA8F2AC
+:10E09000BC5CCB2FA66F67519EDE5103301E5EF72E
+:10E0A000463EAEB36631E732DC4F54F22CEE0FD26F
+:10E0B000C6B79472B419F0ABFADEBEA0DA5E83AED6
+:10E0C00022EFA3CDADD4BEAD5F39FE25C064E7AB72
+:10E0D000FAFF2DACFFF420D7B555207FE00F3D5956
+:10E0E0006521784D552CC14F574954AEAD4AA5F224
+:10E0F000B92A2BD5AFAFCA26F8852A1BC1AEAA0212
+:10E100002A3756D9E9F9A6AAC904BF54E5A0724B2B
+:10E11000552995AF545552FDD6AA8504BF5EE5A496
+:10E12000B2AE6A393DDF56554B707DD55A82DFAAB3
+:10E130007251B9B36A0B95EF54D5517D03F86F084E
+:10E14000EFAE7213ECAE6A22F8FDAA66823FA83ADF
+:10E1500048F0DE2A0F954D55DF52F9E72A2FD57F7B
+:10E1600052E523B855DE87583440D0DCC753603DB4
+:10E170003BC6FD3DCC5B817918B20D67AF961F376A
+:10E18000900EA7E4FE0D23C05DC238728F948D35CA
+:10E19000AA75C5F201DC5FACD6F1FC2DD53D98A582
+:10E1A00086FC761BE3E7B4B8DF3E13FF25C1D3A896
+:10E1B000AABDB8DE28A9E479CAB3901F53891F3FCE
+:10E1C000B9A1759ABC2ED891687F6600AE43425CB7
+:10E1D0005FC467FAEFD11F4C743C877C7AA1F2C10F
+:10E1E000BDD87AA6C59A821F196B724763FE2FEFBE
+:10E1F0003ED1BA51EAFC7B15F2FD874EEB779FECDE
+:10E2000085F6AAE02791E2FAFB0DA193719F7FABFF
+:10E210008C8FAD03749AB228C9FE2A8EE74472E54A
+:10E220004B0F09FEFBFB77E1121FE47B3C93280FA9
+:10E23000CE4466FB105DF0BBC11144F81EE6A4B2EB
+:10E2400035C1518FEFDF0B0B10841D434D711DCD78
+:10E2500027703CBBE5F1EC96C7A1940B92ECBB1088
+:10E260006FC7926D9AF16C95F3338C63DE17705C17
+:10E27000FFDC75FEB890E8C7775B3C8555529E8CF5
+:10E2800022C6E3298F635E8C287F5E0C65FD50B447
+:10E290008FFFCE11FDA1FD5C104FEBDBC0BC19CB95
+:10E2A00086EFE17930603D86F77F8BE6FD82F42FC3
+:10E2B000FE1E14DEDB5DD0E530E599F1CC025EEDAB
+:10E2C00049793578DE1B0720B027E5D5A07AE1260D
+:10E2D000F87F771C9739554FE3EB42F94E9E09DEE4
+:10E2E0004F796930A660EA8A798F79BC66BFFD3CB8
+:10E2F000F7BBA3BC743F7547A2E3EB013C4EFE7431
+:10E3000006C689909FF03B16179D5F037E320A80F8
+:10E31000A29951C04F1DF81B0ADFCC95EFE128CF21
+:10E32000811F5B11DF67DF1E928A7C53B13B47423E
+:10E330007CD7E8F87D3AE79FE57D41F9F710C4F016
+:10E34000B40D74EF009D71A46F4E28DD3B6814D9A5
+:10E35000C2373AD0AFA1E95CDEF7C7F27C92350153
+:10E36000FB93C6744E77633AE787B1EFEFA33C6443
+:10E37000739B78BC9A657AD2EC1D9CCBAA58F89B0B
+:10E38000A79354F3A8D879849FE7629E34F539AEF9
+:10E3900064F9FB0AFF89C650C78610F5F878FC01BE
+:10E3A000E420243D8BE4E038DEEB1E6792C2EF11DF
+:10E3B000E8F7C1CE627E19C71F2C741E503917387A
+:10E3C00083D9A99C099613F9DEEE5C4DF7E767B394
+:10E3D0003A7A3E377B7A1CC215CC3B3216D747CBF4
+:10E3E000AB3FC470D0C4DAD5A3BAC3BC26B8A67DEF
+:10E3F00088E5F84DC271A74472D43B1DF7B785CAB2
+:10E40000A53DE07BF76D1DBE14E3D6E3444E07F651
+:10E4100031A74311F0B318D17E7E203749E95C6EF5
+:10E4200068FC8ADC142D66363C7FA0DC0F6993A360
+:10E43000EC39FFE8897B38E04F22BF56EC3645D0F7
+:10E44000FA14F3CCA0BE92E567A99EFB974E4C6DE3
+:10E450004AFA93FB1B069B9CCF8B717F648E93AF14
+:10E46000C74E19B8BC9D3A14EA42FE5ED0E5F538B5
+:10E47000920F83221F3F4DA5F33D0CFC8F5BDBFB0E
+:10E480001F6D79667A31F237589C237650A2DF9E51
+:10E490009FD2B90687F1BCFCA3105F7B63F9FA79C0
+:10E4A0000EE6A1C1FAAE7609E3A5A7A2CD745F2856
+:10E4B00030CF1963569A9F419E1F8C6C32FAD32637
+:10E4C00039AE561330DFEF83E268BED27056C7D044
+:10E4D000B1D05B9CD351EE1FE2766241975F3BF077
+:10E4E000FB9E20661186D17C281EEBD4317B0D8FDC
+:10E4F000CFD2FC16EACD163C97B36C9AE811C84E01
+:10E50000C038319E1765B6F2BCAA4AFEEDC0F1DAFA
+:10E51000B4E333C7319C9F4D64DEA0617CBC383EC0
+:10E5200027D083E803F034D5F8A05F17E5FF0996FC
+:10E530002CE88735FDF8108F2F5773FF11C6BF8564
+:10E54000E8D31DC6DFF3DAE337208BC2F817A4C780
+:10E5500013DFD5E00EA28876B62BE9DF0941F64736
+:10E56000900F931C2B7BCDC7B8468EC98AF13B76A2
+:10E57000B9A617EAA91026515EAD71369E570BBA9F
+:10E580005B82FC301EF3D659C80F6855E761630102
+:10E59000F135200BC55727607C8DDF25FA00E3B3EA
+:10E5A00013E5F3CDFDD8570AFE28BE26E2F8285E13
+:10E5B000EDA0719A90B25006619C87E8E0A27904C0
+:10E5C00033B71CCF6E26FF60B5CC87430F32B21332
+:10E5D0004343B89DD87D84B9F0DC57E30F93F242F2
+:10E5E000A17EF7793DE929C013E5037CE7736E57F7
+:10E5F000769F3CDE13F703AA7FD8DB13FDC4DD064C
+:10E60000875881EFE7982C8BADFEB846C3C1101E2A
+:10E61000D791E37CB7C8F36C60CD3515509FDD5DB5
+:10E62000641807CC6A7107A33C638EDA8EF61B73FD
+:10E630002F1A35BF6B61B068E16CA682E3F1E85137
+:10E64000C0EF7FDEE03A775BBAF6F729DB7EF7B3FF
+:10E6500035EABA7EF733539EC7AA74FBBBE964D789
+:10E66000268832DE05C417E88146C4F773E546FA0A
+:10E670005D83C67263778F6A7CB5B3FE49F87DEF20
+:10E68000C77F92DD7A2F4BC98F531784CF8DCE5021
+:10E690008ABB3D77594771B775A55FD3FAA4369BFE
+:10E6A000D1EF88D55E2E263FE05201C34D24567D22
+:10E6B000EBFF9622FCBB5BCCF4BDC0F1EF027FDE2A
+:10E6C0000D847A17FC79775FC6DE067F1E61BCCFAA
+:10E6D0008AE576F0E7B174813F8FE50BE0CF633BCD
+:10E6E000F4E7B17C0EFC792CD7823F8FE5D3E0CFE5
+:10E6F00063BB35E0CF63F924F8F3F81CC69547E314
+:10E700003AC8E8DEFEE2E0B015E86748CE50F237DE
+:10E710003EB50DEAE251D9D95B2FEA3474CE6DD5FE
+:10E72000FEBECDD063119ADF3FC9FEAA87A67E70D8
+:10E730004B82A63EDEA9FD7D9B3E0BAFFEFB363D28
+:10E740004B4704FC3ECE1D01BF9FA3FD7D9B68FB94
+:10E750007D01BFBFA3FD7D9BDFC9F932153AA648F5
+:10E76000AF05215FAC2B9D10CE3AF02F94F2499962
+:10E770001E0AFCD4A3E2E48EE2C85137737BFFFE8D
+:10E7800021D3BE4D80CFF758B81DE3EEEFD974A466
+:10E79000979E5B1B4271589367E849E49FF76C4C66
+:10E7A00042FE79EEF2882E389EE140467CDEB3943C
+:10E7B000DBA73E374BC4CF3D4BBD22DE17BDEDB2CC
+:10E7C000D78AFCF85418FF9D2DE8D7B518FA7B7F3F
+:10E7D000ECE07E18C7792E04F819E5CDED0D4E0258
+:10E7E00038FC8A8EA17E045B4979FE9DCF86C8E7FE
+:10E7F00051AFD07DB870D4E9A097DE2BE5DF4FF1A3
+:10E800005C0E56FB43BFFBE95A7861C4579DD6DFC7
+:10E81000313B01C7EBC73BA84628535829FB2DE2E3
+:10E82000A38CCB4F6DA98EE4E912C813E207664DA5
+:10E830007461CD5A797F12E5434D87B2841538CF84
+:10E84000E7D6E869B76C94B875DFCDF0CABA16910F
+:10E85000B6D9258B37B823FF4E19F73A1B9F5F8433
+:10E8600095E9D0CE45003E5DB49F6DAD56FF9ED577
+:10E87000B3B27CFE5E96CF67647EC0F536C2A3C499
+:10E88000F5A353701CD95C5F033D05BC8F75690609
+:10E89000A3DF11FD7D6142978EF27CAF91C7F182BB
+:10E8A0003CAFF5D82FC93397FB5162D170EC679D0F
+:10E8B0009D911E5F67FBBA1AE376970A79BF7D16B2
+:10E8C0007904C46FAF4AAF80FDF77ED84DA54B1ECB
+:10E8D000678FD266AA57FA93AC2ECEEF655FB32648
+:10E8E000982F1EB215C95EB4527ED4757A3D433B53
+:10E8F0008CFA0CE14B663D9E91603D661D63789FEE
+:10E90000B936444FFB14EBE69E2278B585C361CE41
+:10E91000CA343C7FF1B63C9F30A7936057C07C520D
+:10E92000A407C2D5BFE71A58EE90F1BC5DC6C7DB9D
+:10E930000687EE028C63C85F45FAFD8ECEDE53EC8F
+:10E940006CF657BA00FDD34523FFF81B7BB25DF888
+:10E95000F5CDB87E76DAC92E28EBB6ED63B87D5DCD
+:10E960001D3CF5635CF717CA7CF44CF0B80FB1FEA0
+:10E97000B3D1FC77701A47DFDE5BAD2777CAE3DEE1
+:10E9800021E33DC7693BF430B41F6F37E1C8C08C49
+:10E99000D97AFF02FAB38F11AD6EA05B4B96220FAE
+:10E9A000F66094BBF7C74C6707B1FF02BEEFB4BD7A
+:10E9B00060223D9798FDCE01F0DE5F9AF5E4CFC06E
+:10E9C000F3ABCAE37E19FF9FC8E3F8B38CFF269927
+:10E9D0004FF7A21DE98B7196542ADF97ED885BB63D
+:10E9E00023BB653BD220DB91B7D18EF4C5794DA610
+:10E9F00072BB6C4732473F457ED225CC8B2BA01D86
+:10EA000099CB96C138F361FC6207F6EDAE6C31E04C
+:10EA100077B2823574BA333552038F967A06FC4E3C
+:10EA20005762C0EF78F5D7D4E79933027E076C9828
+:10EA3000A6FD6DBE1101BF23A6B523438F4DD0FAAD
+:10EA4000335FDDA7A91FDC52ACA977E23F60BE5956
+:10EA5000C718CF2F1B9CFB04F24BD671BDF2FBCC29
+:10EA6000B48FA6F85B81FE4F166BDBC7D3D13E9EF9
+:10EA7000934978AE93B6961334F5E43FB518EC3D60
+:10EA8000F1FC61F578E03B3C87D8523286D13E3CC0
+:10EA9000F02FC85396FDC457946F542CCA203FE9F9
+:10EAA000A25EB39F9613B02F661FA9DD37CBBAC6FF
+:10EAB000BED9B19B3BF91DF6D688EBF2C7409E4408
+:10EAC0001CF733C153F720DEDEFE92DBA9C62F1FF1
+:10EAD000E989CF3FC0A6D0CF8E6F1E21BF6B479B69
+:10EAE0007C3882D5FED6760FB7176FB524ECC47587
+:10EAF0004666B4407A30F3C8FC29C48F2D3AFA7DBB
+:10EB0000CE94828A60C4CBF6838B83B5F7A754FA80
+:10EB10008108A5D20F22B232FFBDBEFF07E9D10F97
+:10EB200034008000000000001F8B0800000000007F
+:10EB3000000BED7D0B7C14D5B9F8999D7D25BB812B
+:10EB40000D09B08104260960AA3C36EF4D48C22465
+:10EB5000048C1AC8427804C1304978A48A9AAAB5AC
+:10EB6000D86233211062A4121F55B08A2BADDAF699
+:10EB7000F6B65425A0A22CCFAA5058306844D4052C
+:10EB800014ADA5F7A284D6F6CFFFE73DDF77CE24FC
+:10EB90003BC32640DB7B5B7B6FF8E9E4CC3973E653
+:10EBA0009CEFFD3A134208F94AA4FF8B1F4E0269FD
+:10EBB000047FBE4A81FFA7F4B6A19F5C4D02F6F028
+:10EBC0007686A19D6F185F62685F6F183FD3D0BED5
+:10EBD000D130BE56D7BF2D3473A0E2A4BFC3CFA49B
+:10EBE0008BAF5B1A09095CD53B2EDBEC133D632F21
+:10EBF0001E97D369EA9D97FEB7F3FD25A6F3F1842E
+:10EC000074748A7E5B32BD1E5F42D42C3A4FA7C912
+:10EC10004F04BC9A08EDDFD6C5DA36A23AC6D3FE59
+:10EC20002D9D664F9B44C80EFEDE31BE85037D31AF
+:10EC3000844C329F8DF85EF982A9777F04E69B3978
+:10EC4000904418A75D77F179038D76BC6E6F74914F
+:10EC500080ADB75F8CC9EEF4D17574844C1E7A9B7D
+:10EC6000AEBF248ED07DEF762E76C0BC74BD840CF2
+:10EC700023E4DACD23AA9A461122D1759BE83EB649
+:10EC8000844CA48DEE33EB287B7F96458E734580B4
+:10EC90002B21263DFC2F9A8FFE009C9CA2BF8DC28B
+:10ECA00065D7FB73E2C6D3F95FEA1409ACC7AAD4EF
+:10ECB0003B7CE368BB8BAD4B9B77B25DD4C1A19825
+:10ECC0003874F8283C3B48D7CE3A41D7499FB74AD9
+:10ECD000157100DF4BAD939068031D0D32B487E9C9
+:10ECE000C68F9128DEC6F58D8797381EB6001EE8C0
+:10ECF000C65E8AF254F922C06BCB07D67A7FD8FD64
+:10ED0000660F054A365C4D78CD3A61F204287CCE18
+:10ED1000779A3C00BC3C57BBD810619EFC8FF4F442
+:10ED200099D319AD83171117F4CB07CB8F37ADD912
+:10ED30001336FEFB9E98F8D3D7D05F72492EEEFFB4
+:10ED400012CFFFA9515DB3C742E99892EC663A8EA3
+:10ED5000B82A0949E87B3C212B717F1A1C892B8E2C
+:10ED60006EEE72F0D48ECF5D84AF3E9EEF9D472550
+:10ED700064308527052F8C5B3BDEF7B887B6496882
+:10ED80008608EF7FD0719B18A2EB7ECC71DB6EA062
+:10ED9000CF037FB64AC0D73BFFDC9108F7F7A76FD8
+:10EDA0004D04BADF4FDF1D84FD9929D668DBAADE4A
+:10EDB000E400FA7AB3F308F28F4482374CC882B683
+:10EDC000C9D34687BD9A563990F403B7D7399DEC1D
+:10EDD000E3FCBA87F3EBAE4637E76309AFAF35A67E
+:10EDE000E1FDED8D1E6CBFDCE8C5F6B64619DB1DF6
+:10EDF0008D65783DDCE8C3FB871AABB0FDDB46854B
+:10EE0000D161DA9DA5208FCE275200D07DAD744C04
+:10EE10003747C2E775929ECFAE75EBF96C0A8573E2
+:10EE2000787BB27DB8812F5375FD93BEBC5AD75FF6
+:10EE3000783643D79EF869BE6E7C5EA844D7CEED87
+:10EE4000BA5E377E6669A5AEDF57305FBF3ED189B7
+:10EE5000F265874B40B93C3DAB4ED7BF037E0139CD
+:10EE60006C17FC6A32C0A5B25F791A00FCD8008E1C
+:10EE70008C8F7FC3F1B317F06303BC30F8BF0AF087
+:10EE8000A7ED5700DEF49ADDADEC1E28811CA8C763
+:10EE9000B6356DA0D343E1FFAA5344F9BFB5B10124
+:10EEA0009FDB7FBEB65BC4F53A24C0CB0EBE9EFD91
+:10EEB00016A55B8C87B620AD142E5E5776979EDF25
+:10EEC000C7942D44B9B9A3F3A403E8EDB52F2F4F90
+:10EED000EF69E37E432A27037D1475525D957C69B3
+:10EEE000FDA7E9AD4BCDAF8D03BD1A495F18E7BD56
+:10EEF000FE4B4524741FAF76A90FC7403BF04D5120
+:10EF0000A2ED9C2E6532E06D4F9AE012051C375938
+:10EF100086755F387203DC7F2D6436C1BA0F5C18CA
+:10EF200044601F3BA8DEB5D1716F92D4B51328BCE5
+:10EF3000035D5FEC07BE549D16CF6872F13A52D361
+:10EF400045942B5BC6DA4CC204D0776612180B7C52
+:10EF5000AE203C3BBE4C71C2754B9AC8EF0791DFA7
+:10EF6000C7A7BBF0B9572F64C443DB4482280F0204
+:10EF7000DDA6327F84FD8E87F750B9937DE143870C
+:10EF80008B8EDFD75DEB00F9F25A179B3F7B45C8AC
+:10EF90000170DAFFE52627DCDF919689F3EE1CB7D6
+:10EFA00014ED8B1DDD26A4EB1D63D73833B2709FA3
+:10EFB0001E80DD8EEEDAB5E940D75D666C4B4421EC
+:10EFC00041A0B734A667B774D79223B4FFBC47F407
+:10EFD000039D6593F67D03E0FE90355692C2E06F87
+:10EFE0001E42C8ADEC6132D9A59703255D7A7D62DA
+:10EFF0000D2D983503EC08A067DA9E668ED3F5EFE9
+:10F000007F7765FC4CC00B8537DC7BADFB8EFDE369
+:10F0100040FEF859FB0FC77F621D48AF4DE3D60C89
+:10F02000BF0DC66D71786C12F428E40BDACEED36A4
+:10F03000FBC1DEC876EAD7B1FF1B9508F72DDDCC02
+:10F04000BE3A9FC6F6B3C353471EA0CFBDCAEDAFAD
+:10F05000C9274695C3FB0E50FB09EC8A573C2FC4C9
+:10F0600065823CF38A3A7AA3F0417A39DF49701E0F
+:10F07000FA33601A8543011B42F9D0D77C3BEDDFA0
+:10F080009F6773ADA4A8DE7161D7EE3B683B374143
+:10F090002422DDC937FDFAF5E5FDD4A16BDFFAA91D
+:10F0A000DE2EB11181EB7327CA81BEF867E259AB3E
+:10F0B000EEB969669B6EDE5C12D68FF8B4F6F62761
+:10F0C0005FDA3ED9CAE59A669F6CB528F37D40D7D2
+:10F0D000C15997D0A32BB9FE6D4079B18D104F5B0C
+:10F0E0003A95EBDF1065E0C3F3C7ED08C7DCC766F0
+:10F0F0004C24A8AF9589C00F488C61F680F7F8259D
+:10F10000EC15974AE273F8AB085CCDA743747C2BEF
+:10F1100055F35F810EE7FADC386F5F7AFF41C70075
+:10F1200094FB05A54C2F3CE638887ABEE37DAAE720
+:10F1300005F68E10C5FB6CF805F4FEFB561CFFCAE5
+:10F140007502CA11CD6EA824B285AA3832DDDB6DF6
+:10F15000FE01C59FCF5E3DEE567A7DE5DD8EE1C0B6
+:10F16000BFAF807D80F2A1C1C1EC8318358E2E71B6
+:10F170007B970DF970EB5913B183DFB0DD86744ACC
+:10F18000F9F4FE71F43DDB83CC5EE838CBEDBDEDE8
+:10F190000EE4939D7F60EBE858E1607EC619AB0CEE
+:10F1A000F6F8D6153108E731524CC00CF32D67F351
+:10F1B0007771BCBECDF1BA9FEBAB37B8BEFA0DD8B4
+:10F1C00013A8BF983DB11BEC097ADDC9ED891DA0DC
+:10F1D000CFE8F5C5B3CFBF077C797E7B14DA9D639A
+:10F1E00048DA6658D776A715D76984F33C45CF0728
+:10F1F00073ABF47643F958BDDD70FDA8E1BA7659DA
+:10F2000062AAEEF9A9F1D7E8FA4B9D997A79649E42
+:10F21000A86BCB17F4764385F7063D3DC9617603AD
+:10F22000CA3BBDDF383BDC6F4C063C313F676BD7D8
+:10F230001D88C7ADC753062A6176C2360EE7ADC733
+:10F2400099FEDC16FA22468960477CCAC77DC6F162
+:10F250007186E3E33F46C8BF4B1F0CFCF20593BF2A
+:10F260007DD0B1F6BCF6DCA7FE5303C2F5FA4851D7
+:10F270004226D1DA7FE8786F0CF45F2E5F503A6D4A
+:10F280000D513C7F478C696FA38FAC31373C056DC6
+:10F2900055359367B2101C6966ECBFDA03F2B839D2
+:10F2A000A6E139E8DFD264736D8A073EFAFEAFA0AB
+:10F2B000BD9CB2828D5EFF1435C24F28AB39324CF3
+:10F2C00038FFB316DF700FE84DC137FF563A5EDDE9
+:10F2D00060F53C235DBC9ED80C4163F66DA087446D
+:10F2E000CEF77F1194D80C7A5FFE8580723A4A225D
+:10F2F000A8176CC41700FE21F5F27CE00F62A2FC97
+:10F3000043AF8D99CA50184F6422B9E83CC8DAF46B
+:10F310007D4270DF9F05BA2E0B6950611E5B3D95E3
+:10F3200030949F1F4D5746E078F34C9CFFC569848D
+:10F33000803CA3DBC176D6DDC4D5164B286B2BA64B
+:10F340002F687B3EF5F7E1FD26C732D453EFFDCEA3
+:10F35000E41723D84B3D705E6639130A8B8F18E98A
+:10F36000A783D3C5B6641FCA5FE3F3B900170AC702
+:10F37000AD1F4E1781BEB2EC0364B02BE806C51971
+:10F3800054BE6F3B79BDA326C273D767D5E4660C24
+:10F39000EE6D6705378B354EF4E745D8D716FA3B47
+:10F3A000ECEBE54E5300F07BDE694579D2D73EF2B7
+:10F3B00042FA38442ED80361FC46C80217F88B0283
+:10F3C0006917BEBA269CBEE4FBC3E9EBC58BE90B0B
+:10F3D000E1FC9DB7D210AECD02A32F95D217F4ABAE
+:10F3E000250D485FAA89F89AB390DEF0F9E566BB6F
+:10F3F000CB4625E4B28C147C4F474CF97B0109DFE6
+:10F40000973A13FDB96AEECF55A39C7FE32893F397
+:10F41000C67DED3C3A677808EC89D17387039F7706
+:10F42000800218068BCA9B27EBDA248076E0140250
+:10F43000212B80C03CB03F3BAED3DA5ED62E66E3D4
+:10F440006F79FED10D2AB46FE2FDEA6CD6AFB549F3
+:10F45000FEBC62685B4CD83E09E3E9FB1EF3C8CBF7
+:10F46000006F8FA6CBB7025DE680D142AF9F4D9073
+:10F470006F87F6B20C82FBFDDE04F95B304E6B6FDA
+:10F480001B2FDF19DEDED2E3A7B6733FF556B44B70
+:10F49000DFE89A89F6AC447C3780DE7923C8E251F4
+:10F4A0005B46F5EF071DE4F6FC01EEA7BE09F2E8A6
+:10F4B0002AD027CC4FDDCBFDD4DD5CAFECE47EEA77
+:10F4C0000EAE575EE57ED22BDC4F7A09FCD4ABC082
+:10F4D0000EA9E27112E6A7668D9E5C8A76844BF3D4
+:10F4E000534744F4532BBC7A7D33CDA3D73737A48D
+:10F4F000C519F48B5EDF4C8DD7EB9B52E73506FDCB
+:10F5000092A91B2F5FD0FBA945DD25BAF10567F451
+:10F510007E6AFE473375E39765488847EFF11B75B0
+:10F52000E3723A6B75E37AF1E6433C59D5279D6067
+:10F53000C76D1955C7F1C6EC050D6F1D97C0DB6F80
+:10F5400038DEF672BCEDE678DBC9F1B683DB03AFDB
+:10F5500072BCBDC2ED819738DEB672BC6DE1F1853B
+:10F56000831C6F0738DEDEE4FE6ED6E8DDE89F9D83
+:10F570003F4B38DE368A91F05696281AF0E030E09C
+:10F58000418FB712F370031E520C78B85AD72E3839
+:10F590009361C043BEAEED3D5E6280FFF506BBA148
+:10F5A00052D7AFE16D9A67BE81BEEA74E32E9BDF4E
+:10F5B0009CCCCEFB6BF96D1FB7E3F670BCED02BCC3
+:10F5C000619CC8C3E3115E1EF76576DCCB1C6FDB64
+:10F5D000785CA803F006F61DC75BF3A87368C79FA5
+:10F5E000BFA0E1ED6044BC5D29BF5DEBD6C785A639
+:10F5F000B8F471A1C9763DBF1513BD7D37E94B3D08
+:10F60000BF159ED5DB77133FD5F35B5E68A6AE4D85
+:10F61000ED8084CC6CD05337EA9ECB0ED6EAC6512F
+:10F620003F89F92D1EAEF7FD95A88F5AA631FD48EA
+:10F63000F910EDEF67BF4DED80F45E78BC68F09F88
+:10F640005EEC437F5F93C9F477C77BD508D76CD056
+:10F65000DF91F20B7C5C4EA60BAF363351A33370B7
+:10F66000997B86D1F5984731BBC71CB316820CF045
+:10F670001334E5F4DA49A2D347607E6A2FE5648645
+:10F68000E97DB3AB8180DD20DA1E5A00FB22A2C9DE
+:10F69000837AD7601F917A977C07DCBF6380A78D40
+:10F6A000C2E296CC585C879B6CB6809DD198294F5E
+:10F6B00002788A93193CB62451DF9DC2634B146BC8
+:10F6C000AB145ECFD0B6387001C2AF83C24B4C874B
+:10F6D000F9E3C9DD745D55995606877984E953F5D8
+:10F6E00039A65F7BF421351868FBD968D6BEF18551
+:10F6F0009FCE53137BF56F5DE64BA84FC73887D578
+:10F7000091F174DEF5EA20B033C7D2F5817C34394B
+:10F71000B62745B2BFFBB2C3568F97E7C17EBEC7BF
+:10F72000F5EB180A117346DFCF3F1BEDBB05F09BCD
+:10F7300005F0088B7BCDCC64766B15CC3318ED4B84
+:10F7400039DCBE24C14A6CB7A433FAFAF1DA99481D
+:10F750006F4E0A2F3116D6CFE037FF2E465F57BACD
+:10F760000F6DFDFDD0892FDC9E0EA393EF45A213F4
+:10F7700052EE71A3BFDE973DA7B2F53673FB51B3CE
+:10F78000936D899ADDECC7F558287BE40FC22B995D
+:10F7900042E13AC845305E53ED32F9FD14645160E0
+:10F7A000F083DC2915882B19669709C363B9142ED9
+:10F7B0007F8CF141EFF168837C1F64D0C3C374ED8B
+:10F7C000A2EE14839F7875BF7ABED439D1A09F264C
+:10F7D000EBC69725DE60F0632B0D7EAE5E4F9889F9
+:10F7E00059E5F83261DC421524730EDC27889FB09E
+:10F7F0007EF43B7BE0FC845C85FCCAFD1A23BF36AB
+:10F80000664A0867C1C5FC1A8D1FB4E735F859DD93
+:10F810000CAFEB7234FDE441BD630B7C93405C950F
+:10F82000DAD0F2E6307ADBD4687FAF7434213F69F6
+:10F8300024EF9552E4F91B5D78DDD8E8C6EB138D13
+:10F84000125E1F6F4CC371EB1B3DD87EB4D18BD7BA
+:10F85000471A65BCFF506319B6DB1B7DD85EDB58C9
+:10F8600085D7B64605EF8F322BAA9DEE6B542BF150
+:10F87000A8742BA3DBE9FBC2E096DA4AD71106F79E
+:10F8800064D5A56B8F5CEED68D4F6A9074FDC3EB8B
+:10F89000D374FD098A47D71E5AE5D58D1FEC9375A1
+:10F8A000EDB8B232DDF858D9A76BC778AA74E31D5A
+:10F8B000698AAE7F5751FEC0503F7CFC506320C820
+:10F8C000E0120C3238BD1E64F0E9C2EBE75CFE0EBC
+:10F8D0003207515E0CCA7251D2A1F8B2B3FC5A9CE5
+:10F8E000D923C486CD1F5746E74B0B5F2F9D4FE7AB
+:10F8F0009FF9915E623C41DD7D475A97EEB929A29E
+:10F90000B304F211870B448C7B1D2E888B01FBE521
+:10F910007E8B6B5A16A5C7434745CF26780E1E88A7
+:10F92000202F4F70BDE8186F47B950B14AD8242234
+:10F93000D1B2E76B3B5323C63D0FDD4BAA605F8E10
+:10F940005D2F494017150535715161FE5A45E0CFCD
+:10F95000A56EB8BF2A3D278ACE56D19A6CAD1BDB67
+:10F96000BB2F6D5CED2ABD7DD94BF77E3BEC638CE4
+:10F970007AAF1DE45B5BE2266CB7A5F59F27F98C97
+:10F98000DB619F723BEC348FC37CC4EDB093DCEF42
+:10F9900009713BEC036E871DE7F6F3316E877571D5
+:10F9A000BFE76D6E3F7772FBF908B7C3DAD29E9F4F
+:10F9B0008AF2F017021123F8A9DAF5969FEAEDB062
+:10F9C0006FFAF576D8D2F57A3B6C71BBDE0EAB6B75
+:10F9D000D5DB6135AADE0E5BB85C6F87DDD4A097FE
+:10F9E00087F3EB27EBDAF3147D9C6D6E95DE7ED604
+:10F9F000F033DBA7978B95657AFBB9AFFDBE12B8E4
+:10FA00000EF33F80C453617AAF279F0B7A85D245AE
+:10FA1000D605AA57300EEE6B86FCC9361842F56F34
+:10FA2000A129F816E47DC8DB2281B8D3AEF339E50D
+:10FA30001511E82F47D5D3CD82E3FAF8C68D77E9C3
+:10FA4000E13A6399DE2FB196E9E12A27EAFD924A6D
+:10FA5000A39EF1E9E1AA1285005D1AF58DC9B14CAA
+:10FA600002F97DA57AC74AA85E616D9DDEB1C29D8F
+:10FA7000145D3FEA9D1F64B17A831CBA0E30169A5A
+:10FA8000A2720F7828DC76BD6BC63A11BAC023A3E8
+:10FA9000A8FE2982DF29FC5EB5286A03E4D9785ED6
+:10FAA00084886776DF4EC75B87B3BC08F9D2FC1148
+:10FAB000CCAFD07F80AF1C42DB617A2E3BC8FAC34B
+:10FAC000D6ABEBF703CE06F7B71EF9C8A89CFFC963
+:10FAD000F5C4C49F06A137814CC07A83D0A0CB8ADD
+:10FAE000AF1AEF6705981D9495C8EC206FD24C9122
+:10FAF000E79F08843CBC2662C778E608E27F06E2FE
+:10FB00009CD1071CD369B319A64C003F49CFFFB362
+:10FB1000CAFBCFCF1BFDB0EBA45483DF768DC1AF02
+:10FB2000D3F3BF8D18EC971091C09E441C9874FDC0
+:10FB300008A777381D359D68990FFB7A2989E75703
+:10FB400038FD4CE4F82264F3EE1ADAEF758B04FC0E
+:10FB50000D1B51E326407D51B04186BC43AED7E634
+:10FB600042BC892B3C68979E61F8F1D27F803F2F81
+:10FB700009C317E0EFB81E7F3643FFEF393D5DBC88
+:10FB80002E4647FFB87519E8CA39E8B2EA588CF72B
+:10FB90008B83B21843D7B7D725601E756FB0215835
+:10FBA0004CDBE7DCAC6E684DE24C33AE97C803A685
+:10FBB000503C4CE5FBF5F2BC56472341BBE3C54640
+:10FBC0003B5E096910411EB5B8EF8803FDD831428C
+:10FBD000190EF5691D836357417E7E8B25363152A0
+:10FBE0005DCB4E4B2EEAD38E9D0966893E5F6C76C7
+:10FBF00099E1B9E2C45A11FCBD6BBB08DA05C589AD
+:10FC000004F3592F36060EB3F729588743F73119F5
+:10FC1000ECD35257CDE4987888CF52DB46023B377D
+:10FC200016FDD73D836D88379B6B69E9B7E8FE0EFB
+:10FC3000268844F052FC788827007A20D1E9F1C365
+:10FC4000746ECB4980733DFD0778D1F402E5F393E0
+:10FC5000E1F8C825616DCC2BE8DB23B3F5F891887A
+:10FC60008275162D5DACBE8C8422E7593EE4768306
+:10FC700016DF3FCEED86633CEE7698DB0D2D86F8E1
+:10FC8000CD5BDC6ED8C3ED867DDC6E789DDB0D6FC1
+:10FC900072BBE100B71B7AFC05A236415E711EB152
+:10FCA00087C05F3858C3E0EC5E25F8CB201FAEB4A8
+:10FCB000FB4AE87DDB2A0BCACF91896A13C4C76D62
+:10FCC00055EA14D8877B417B135C9B8ADA12E0FEED
+:10FCD0003CE5F471F0B3815EA6E5707EA7785867C5
+:10FCE00065705EBF38C6B312E85959528EE31219D7
+:10FCF000DCECF41FC03B61912A001DB8158B0EDEB1
+:10FD00003506F8CE837698FC88067AA4F09C9ECDC2
+:10FD1000EBCF32492683BB1A05708FAAE1704F8B57
+:10FD20008FC827EB39DC35B8EC2CBAD9A4D2A16F37
+:10FD300025B2BA89B70A6E361DA4EBEF9445CCBF45
+:10FD40007626F23A41FE5EE37CEF707B765D49FFFA
+:10FD5000F1BA437C5C4FBB9548B68161F394DC6F8C
+:10FD600091E8F35581FB92802FD60DD0F2C41EB4DA
+:10FD7000AFA78805BF4DA6EB0CF23A484D5ECE21E9
+:10FD80001C3686F7BDC5F7D9D77ADE2AB9C122D18C
+:10FD9000796705EE21F03E9BB9C11D5E5FDAC9D7D8
+:10FDA000B766C69D04F83238E26C3DFAF13E9B041A
+:10FDB00076F7C844CF6AA00377A262F936BD3F9DAB
+:10FDC000CA43C905CB6ADF190FE3E8338F13A09745
+:10FDD000AB37033DBC956447B9D3D77A2ED2237E87
+:10FDE00082F6485F7A84CA1FB4876CE59F1C07BF00
+:10FDF000B692347802F4B960966730F031A9B2A0B7
+:10FE00007E4EA3FFC2F36ADAB5D2A0BF1D5E4BBF20
+:10FE10007278E485C656F03BDE02FEC13C2889813B
+:10FE2000FA9C60F99D76804F4552CA2EC00F29B6C4
+:10FE300087465338AC29587D13C06B4DF952970053
+:10FE40007455988AFDC162FB69A8C8E92A5E9324AB
+:10FE500085C17BCD7DA448017827DDED5E42F79515
+:10FE600092F8C74685F24D9785F93DEF94FC3E31F7
+:10FE7000396C7C4676F1BF67435CC7CDE87C8C5516
+:10FE80004989541FACD179535134C6654ED6B07AE6
+:10FE9000057A7FF572FAA842F5559BA7978F1773DD
+:10FEA0007A8A1ADD5D0FE395FB6C12FA67E282969F
+:10FEB000E5B45D05F612D84F8F58902F357E4E6A07
+:10FEC000D0CB4DC5C0B75506BED6F8E9379AFCEC85
+:10FED000E5E318C06B540DE3276D7FC67DCDFB9223
+:10FEE000DA39718418FDBB7717A546333D1666DFF6
+:10FEF0004E40D92459E9FE66717A9AC5E98992E49F
+:10FF00004E58CFA17B52A701BED426EA07C0DA56CD
+:10FF1000587AEDDF14D82719E0A5FB9FB55C4C0794
+:10FF2000FF94DC65E9A5C714DDFBB05E604E781B6D
+:10FF3000E85595DF013B02C299F0D23F9D38BCB72E
+:10FF400099BEAF73581C69F2E07C1F31F928E17C3F
+:10FF5000870AC4015EE8FFEEE87448E193707AA571
+:10FF6000F38754D65F7D4F6A069A9BBCFDE18AC138
+:10FF70005041467CE596DEF1F0BF5233E27FF60A4F
+:10FF80006113C4FFC6889F9FDD4DC7CFAAB4799A7D
+:10FF9000E9FCB31FACB580DD5FA92A7BEBE8B84A6A
+:10FFA0004A177E17EE43C72747CCC402F31C9105BE
+:10FFB000D24EDBB366E9F9A67A85BE6DB4478EC62C
+:10FFC00028234CF4F94F041BD944AF3B372CDD08F0
+:10FFD000F37DFCA00DEB0A09BC2B07F400E1F1490D
+:10FFE00079E33DB4BF76BD8D405E641EB7F7E37222
+:10FFF00092715E9363013E5FD316837EF1E90D43F8
+:020000022000DC
+:10000000C703FE5B0735DC06F5D41FC72AD580D7AA
+:10001000DA35D798203ED21ADD3E05C67F6222AE81
+:100020004DE9B42D3D6481F57451FB00E2ADDA3A3F
+:100030006B5AC3F00FFBCA6171DCE926A26C8E60BB
+:10004000D73C9A23703D4B545BD8FA37E448787F0D
+:100050007ACAA09687E13D14FB2E0F870BEC7B0A32
+:100060008B8BB6267AAA07D3F6470271AD8C87AB85
+:10007000FC01F0A7FA031B7906D14F70BC75F8B0EC
+:10008000A7DBC2FCFF4CFEDE53B1ACFFA43BDA0F92
+:10009000FB3C29B1B6EA76FA919ECD4ADA9C18B6B5
+:1000A0001F61089C8260EB3B1A235953101F447A4E
+:1000B0009EAEABF691C710BF5B287C803FBB5C5205
+:1000C000CB4EBA8ED35459ABD0EF7E7C0AC0F3CE60
+:1000D0000C4AA80917C3A9316710AEE7F4FAE6186D
+:1000E000AC337111C53AA4171E35ED5BBF238C47A5
+:1000F0003DAF32F9C1F84F2061F29DE2777ADE0F11
+:100100002DB5B0DF28D20E7831ED59658775CEABAD
+:10011000B1607ECC497C65204F6B1E11B04D7FD6FF
+:1001200082BEA8E5FCD52A0DDA07747C12EC71F4C6
+:10013000F79ED80BF501355C7E552DD2D3E962B719
+:1001400059C72F3396EBF987EE53D7DE98C3EA3AB7
+:10015000BBBC1FC7837E6EA5DB06B87CD222F837F6
+:10016000A17CF58D08AFAF1B9363D2E2F092250C12
+:10017000FEB594FE6A416FD8497B09D83579A3A7AB
+:1001800002BD5B8F46E33A8DF0FD6787C3A924A9C2
+:100190007A305DCF294AC750FF73724333DA2FF0AC
+:1001A00023EAF8DAD502F4BD84AEF27117D2A7754E
+:1001B000C6B85E7AD1E053B33E791F8C73FF678C6B
+:1001C000449D2752E3CE5F0AF6640F1D19E0037BBE
+:1001D000366BEF49EDA533EC8F406765742CC38B0C
+:1001E0008AFC5253DA93D71BD15FFD32E23B9FE288
+:1001F000B5237D3EE4A13439B7AEE84DA483732E18
+:10020000E217995FFB36C8FD18BE3695C881BA78EB
+:10021000502654EFBAF01EFACB717CBFB1CB856388
+:10022000A599840C5A2E1E2BA537634B8301D0133E
+:100230003637D7BBDB737F3566089C6E2018A7194D
+:10024000105DEE09E06E5C09784EC1E24A00FBE702
+:100250004141A882B8FD00A2B7ABE20CF02059E6FC
+:100260008FC2EDF2682EEF974E4915D0DF29D3FBF0
+:10027000A766835DF4AB1C93E65FE055825F291CA3
+:100280005BA8FF06726A50A0BD1DE8B39ADAAD7E86
+:10029000DCBF07F33AD652813C2EF4C6AFFE51F1D3
+:1002A0008B8BE2603C7ED1571C4C8B0754B25BD4E5
+:1002B000DF51DC90F7AB74533F6700D85937BBD19F
+:1002C0006F729F46BBD4CAEDD2A8D18B5C2C7FC67F
+:1002D000F8478B0718E9CA185732F29FD12EFDCF85
+:1002E0001C6E3F5D4DAEBE92F88016C75F93C6FC94
+:1002F0009E3569B52BA17EED3CF77B5CAA09F138F0
+:1003000067968078D4ECB539DEB3B380FFB4FA8356
+:100310004BF93D6D063F24DAFBB42C47D09F8E5C31
+:1003200046478E02D63FC74ECCF6B0FC813397E9E4
+:10033000DF39540FDAE916A7F3734415449F9F1A67
+:100340009ACBE4AC76A53FC18C1C5DBDE0D0DCB09F
+:100350007CA88DE743EDBC5EB038BD7BF757705F7E
+:100360006675C036B9E6C96F533844CF8AF19890A4
+:100370007E95677E087EF22C07CADBF83409EB5EB7
+:10038000AB12ED1EA47D557E1BFC32B43325D892F2
+:100390008CF2762EE5DF80AB1F7FC7DE7FDCCCA939
+:1003A000F93B058CAE7AE24B3E26BF4DF41FD0D30D
+:1003B000EC2A3DBDCC55FAA79FDC5CFD39AE31A1DE
+:1003C0000B3BBF42BA60FCBB6E04CB479F2FA763B9
+:1003D000207FDB873DAEF9B74E0BF58B285E82F2AE
+:1003E0006EA4F7601AB184E3DB5720EAEA1B827936
+:1003F00024DA45FD9EA085243D48C70D90E75EEFB9
+:1004000002DFB7D81653837AC3AFB3EF0FD1794F5A
+:1004100038FB5E8791CEEF1BBD04E3FF0F5C4741C5
+:1004200046D77F1F249CB15E6FCB7CF0DB1E8036ED
+:10043000D6DFFDFBFC62684769ED6D3F92C3EA0DB4
+:10044000EEC90DFC482DA07E8D9DEA5B3A9F4322AC
+:1004500098A7226433CA6711E281209FC786C1171B
+:10046000FD063DBC8D76BC58C0E228A281EF8DEF21
+:10047000BD3D97F339C7535FFB363E477FAAAED6E3
+:10048000D3FF7772FBA997353EEF84FA89982BAF9B
+:100490003BA08214F3D3223179C05F262504DF27E5
+:1004A000B8185D8184013D686918E041B8D17614BF
+:1004B000E805BF438BABE2A2A300FF22E41303A82D
+:1004C000CFE95242422A8CD7EA0F14F295E3F2E5C3
+:1004D0001E95C7388F54C6F2CBEFCA2404EF1BF326
+:1004E000F87A5F0EF8EB47A99E95408FDFAC42BCCF
+:1004F000AC7B05C1FC80C3A5609BBE2AD4EC82B84E
+:10050000156B575318815EB6B9F5F5AF3B8B1E2FAF
+:10051000B6D2FE9652166F3DD418787715A5B596CB
+:10052000827C9497AB6060D87A83BBA2AC10875171
+:10053000D46FD9C16EFE708568856B70658D0A9B1E
+:100540007E3741DD2C4810775008F8F9D615CD5389
+:1005500080AFDEB5A89E414ECCAB629EB875A57A41
+:100560002BF83DB2545E964CF96853AB19CF199DE8
+:1005700028F97DA214C6879FE732BFE1E0CEA80725
+:10058000000E6B047B280AAE1665D37DF1F03EABFE
+:10059000A7892EF1DDA68793E03D6B16AFF1EC82C3
+:1005A000FE261B9C40256B36D8AB60DE35494BDC04
+:1005B0004BC2E6B50FB736C0FDE0B016AC6B51CA02
+:1005C0003CD6A858D8D7E731909F6D5D911907B4F4
+:1005D000D892601D5107E396FCE9B7B98077C984CA
+:1005E000795BABBBDD02FB1EE95654C88F9B72944E
+:1005F0000340AFF3969F98827573A5B1ABE13AF2D1
+:10060000C2EDAD00FF77793C2694508BF9DA964520
+:100610007576586F4542CACAF0784C4BC162FB18D8
+:10062000FA5C8ADB54B374C0C5F4D102F19709B007
+:100630002EBA9F7130EE8F8D0A1D174AB256453A79
+:10064000A7F509D747F6E6A529101769D96087F4F9
+:100650000C691194F5901F50939D11EBD833BC0C8D
+:10066000EED58A6B8A5542FC20BF7DBEF5D88FD46B
+:1006700051605732FCD9CDC46E09D37F19D9C567F3
+:1006800072C3FCE88BDE9BD082FAA04560FC9BE144
+:10069000FDE247502FFC7CB6AF1BE0B7A655590FC3
+:1006A000F022AA9D0C28EA9B4F42F7911184CAE3DD
+:1006B00096265B55A43AB4D022713AF009E5A0130E
+:1006C000034684C9E5957529101F09355D85DCDD74
+:1006D000337E83FD03C04368435A2CE8C350526DF8
+:1006E0004A0AD02DA74BE3FC5BB81DF062A62FDAB7
+:1006F0000B76E55896F79C91EB73629BB4BBC1CE29
+:10070000FD1AD06D2AACF71F48B7A8E73ED9FA1FEB
+:100710004857C47579F9481F0999319F5AF4178CC5
+:10072000F7B68DD3CE3FB1F8A066F7468DFE6815BB
+:10073000F8ADBE3C2DDF55B017FCF5E95A3EB59C2F
+:10074000C5075DF45FA4F8A0CF101F9C6E686BF620
+:10075000E60D5EBD7D9B28B5FB4A40EE1E103DE0D8
+:100760004F2411A65766940B7EB0B39B8AA2EDB8B6
+:10077000EE3C1EE7E4FED73CBEEE638D7602F92424
+:1007800093A36035AC7F7A3E5BBFA33E3D3B2081A7
+:100790007C67716E526F93306E02C84F203D7E9A17
+:1007A0000F26A1FB9957BF14EDFD5EF835B1F81087
+:1007B000D1FB133E62F01F16317B4CF3B7E61BEC06
+:1007C00003A3BD6F8C53F7E60536DB819EBAC7667F
+:1007D0001C4A91B05B0D68F9003A6EA1B773752899
+:1007E0004CFE7472FD70A4513EB68AEE7FB5EFC721
+:1007F00076A0D336B3DF0EFAA4ADECCE18A0BFB608
+:10080000056219F07DB0B10CC71D6CF4E1759597C8
+:10081000C9BB60B6BCC21B1677AE2C2B3EB62ABC39
+:10082000EE41BEEED8AAB0F5577867E8DA1A9D55C2
+:1008300088A4617304F9F2BC97D9ED66AAF7B1CE2A
+:1008400050FC85A7BFFA1BEAAF7687C3EF41AFDE46
+:100850009EBD7F6CC9C0FEEC166D7F1A5CB47D6BCB
+:10086000FD7DADF37B7FE33A9FF5EAEDB94BADD368
+:10087000B83E6DDD7D8DAF0061350CD659BA00EA0A
+:100880006283D94A07C8A3CA526135E44B8FF07816
+:10089000E29182183CE7BE378DF97BD1F58C6FA2CF
+:1008A0004B6760DEEF4AF17BA397D995B30A04BF8B
+:1008B0004C7F9DCACFDB1F4B63F9DCA6A29FFF16BE
+:1008C000F2D0EF145A58BC97C8D3A785E5B1D659D2
+:1008D000FD01C8271DEBA9D358B6FA6EDA8ED6E40F
+:1008E0004A953EEF306B963E7F5861C833441BE417
+:1008F000CA518D3E7228DC537BE1DE973FD1177DD4
+:1009000010F3D92CD04346F8DC66808FD17FA9D86C
+:100910006EE087CBF46336B566ED85BC9A4AEDC9C7
+:10092000D1803FE8A2CF45CBBFC634C8803C468FBC
+:10093000634267D6825EECA42A00F4CBBA9977AE04
+:1009400087F679AAF7012F7DBD47F3DF9ECF96BFCB
+:10095000F446A81FE89123601F4C80BC6064FBA094
+:1009600073D1E46911ED83997529D9B0AE197AFB79
+:10097000A07343D99399701FEC03FAD39957A7B387
+:100980000F4859E625E0C3E46ED4E8AC88757AB325
+:10099000B395C17961FB71A43590F07AC6EE1C79EC
+:1009A00008F4CFE07104ED7DD4FEDA638950BFA86E
+:1009B000BD2FD7CBEAF049591CD30FFC7A293C6AEA
+:1009C00075D4F75B64FCDE8B16F7D2C665E731FBA6
+:1009D000B03545AE877EE2CCB8C4BC4D5A9C232DC1
+:1009E0007D08AF1B96488F3FF41741C2FE08FE1EDC
+:1009F00081BC6474E2D93D2E3AE433AF929F970DE7
+:100A0000E728FC2AE4436CE502DA4BB6448276CD53
+:100A1000E5FA57973BAE158A03C0DFAA65F1F2E20B
+:100A20007433B6A3157113C8854917060A20377C9D
+:100A30008AF834AC375AFEFCD31F83BEA67A1FE275
+:100A4000303ED280E7AC9D161FC627DACAE9CCE952
+:100A50001087596949C1787AF2AF63DCF0367F2B91
+:100A6000C4CB6D1E761EAACAABAE86EF6654148E3A
+:100A70001608ED9FEE63F19B3910BF8179679DDD0C
+:100A800009F19FD95E26BFC06F03BD39B7EE3BE3C6
+:100A90001E95FE9AB88DBF352E0BE34912C60B0C7E
+:100AA000F1215BC1548C0F69752ABE0211CF779377
+:100AB00044277E87C218DF31C6738CF11E637CE742
+:100AC000EE3C5627ACD953DFCED3DB532BE00CC220
+:100AD00060B097A8A8A47CDD662149ED943E0F156F
+:100AE0007F42EEA2EB70FED00435E0749C21CE78FC
+:100AF00099722B48E5CA29D8C8EE372CE0DF2E9032
+:100B00006B30BE67A4FBC7B8FCBA2FCFA9ABEB080C
+:100B1000362EE7CF47A980E705A3ACFEA8E4DE792F
+:100B20002E973F9ECA911FCE637EC50F81CE894707
+:100B3000C1F30433725D3ABA250D83C9A9B0F88DAB
+:100B4000F1BDDA7AB4F9AF741D0F71785F2E9FACE6
+:100B50002BCAB75BE9FBCF511C8BA82FA9411D16EF
+:100B60009FD6E2E7DA73D59037C8043B52C0FC81C8
+:100B7000763F2C8E6D06BA8D4E54E448DF9B7A3B4F
+:100B8000AF276E8A794CED3D4450502ED4F17C8DC8
+:100B9000369F99B89B900F80B6B5758911E2E6C46F
+:100BA00063B75192A95D2B1288FF3889DC0EF1677B
+:100BB0006BAB05DB44ADDA0776FA22CE17D682A9F5
+:100BC000FB20AEA6F185316F631513A7C2B475ED96
+:100BD000FAFC95313F65B4A7B5F8BA99BE04D6754D
+:100BE0000EF0C1F6EB172F6FBF4FE37EBEA6FBD50D
+:100BF000E8AA3CF31637D49FB44429EB6BE8BAD487
+:100C000027ED18AF70C0DA002601FA0FE4E493DE96
+:100C10001FE379F67CF65D9A1681D5A3EC49F8635B
+:100C20007CF8F905533EA39B9FE549388EEACF0037
+:100C30009C972263E3912FB4FA934309CC0EAC281E
+:100C40005C1CB893B6FF8DD74B5E53F88C96EF1FA4
+:100C5000509C43B0F403E0B2CECAEAD20E7DC38CFE
+:100C6000F564443CB0EBCEF8DEBADD6B36EBFDCA82
+:100C70001BD2F4F6A0D1FEB31ADA43F38D75648A61
+:100C80001DEBC812781D195FBF914F7EDAC8F21AAA
+:100C90003FE775FFBFE0E72F7FC9EBF736F3F39728
+:100CA000CFF373B31ADCEFB728188F3E711DB5E987
+:100CB000627BE380EB8ABEEBC6F3FBF9CCCF9A22D2
+:100CC0003A77819EEA3D67D1FF77C22ACBF479B3A8
+:100CD000D93E7DDE6C6E953E6FF6FF32E5ECFC6C26
+:100CE000388751BF12BE5330639588F9CA752DE716
+:100CF00050CF9E2F406BFBA2F71CE6E730B4731C6D
+:100D0000DAFD6BF3D9F7911CBB122C508F3F635562
+:100D1000EC54889F1357C665D96F15107387FCCFA5
+:100D20004A9705BE0731239080F1D09AD62B9BE7D6
+:100D3000BED143304EDD13E757C7DE04F2F9B016DB
+:100D4000E727D7DC0471FEC33CCE5FF3F2B827C1BE
+:100D50003FFA599E3C17E0D1942757C1B586AF871B
+:100D6000B66FCC1FDCDBA63FAFC7EABF3F5193DFB6
+:100D70004F3C5D9C2C3444AA17B939BF27CEB5141B
+:100D8000E627F69E38D737613E626FC77376F7E67F
+:100D900033F9D47C8CD4C33CCD2F93FAE723D8DD30
+:100DA00077E50BDA7CDFC2E7DD9A7EF3DDC9E6D7B3
+:100DB000CF27DA624780DF7F82D79719E7BB37DF1B
+:100DC0008AE3E87CDFC3F9127BD6776FF8FA7ACF33
+:100DD000CFB86280691DD58AA98BD2136911B1EE93
+:100DE000C4D1E19A067549646A2AD6B11C2EADFCBD
+:100DF000A7384F73B8F4857FC9F334DBF2932FEB38
+:100E00003C8D63265122C535029C2E7715640E0C4D
+:100E1000F58327EBF2FD41B0337ADA668540DECF09
+:100E2000BAFC20DEBF3FCA551DD1BEE0F2ADA574AD
+:100E3000910F52426B92A68AE1F6CBD92CE5CDFCFC
+:100E400008E713CF8DEADE0DAA6966A96016E2D124
+:100E5000DEF608547E66AD9821BA2542BC0D0F4ED1
+:100E60001E4AFB672552FF2E6CDFF9F5BFDE4DD918
+:100E70009514941E6E8EA7E376E4286F03FD16B9D1
+:100E8000A53DD09EE54BC7BAF7FB6309DA79274643
+:100E90005BFD9B922F5EF7EF7AE5F24AF315C8E50A
+:100EA00096467DFE7B4DD29895B0FE3125240412E6
+:100EB00036C57DB618F27F19D9CAEF605D296E225A
+:100EC000DBC6E37D9984E56F8CF30E98C8F0342679
+:100ED00094F80388271FD2FCFDA22BF6F7FF180E0B
+:100EE0006FE3F584E6EFAF8EECEF9F581417391FD0
+:100EF000D052570BF98013ABF5FEFE890DEE6A3820
+:100F0000E77782FBFB27A6507F7F6CDFF9006D9FA0
+:100F1000540E3927EAF201DC6EE771EDD9D9F2C03F
+:100F200089D9E8CFBBE0DA9829C7E278D575139E56
+:100F3000472691CFC992275C32F839DAB9F65CAF0F
+:100F4000320C9ED7CECB8E01D13608F2A2AEDB2278
+:100F5000D1F368BEBEBF3E4FDA93C734E139EACB66
+:100F60008CD35FEE38C9BB99D5E398599D61544243
+:100F7000891BF253E7C7DA51BFB7C2FFC2F46A6AEE
+:100F8000BE3271E2E0F0790CDF57952EEFBD5A9D2D
+:100F90003EE82BD02F9D849481BC7920B601E31EBE
+:100FA000D771B819AFE513395E892B1EE0999AEF16
+:100FB000BB01F0415EDC2CE17760F9FDBEEAFB8D00
+:100FC000EB78D6EA7B1FCFD7978812ABCB23C81715
+:100FD00057A5B9504F6BF6D7D2894C6EDA48689452
+:100FE00095EEB359DEEDCCA4E33E7CC29C0E8F3D62
+:100FF00017432CB06E5F1A9573741F256E65647F5E
+:10100000F211BE4864F2C2352098DC788D635755E2
+:1010100080FB17F1E313DD83C11E7FEE49969FBA73
+:10102000EAC945F6DAB0F99F98C8E566225B7FB554
+:101030002CF8A56458CF59CC43CD904C1E9940DE76
+:10104000F8FCD1B91027A4F6DB686C9FC376503248
+:1010500065425EFB43F7174761FC55F72E1E82F48D
+:10106000CFE1B17045E6B368E7E728DF05FC070B81
+:10107000CEC5A48E453B7E3DD0FF4281F822D909E2
+:101080000F71BC5D2F37DC087476BD6C23706E2D3C
+:10109000586C43B83F572848E0B75600CD433CE76B
+:1010A0000933C69B293C9641FF018F03BF1B5D227C
+:1010B000FFDA0CED3F8E13C8D07EF4F115C3B5E016
+:1010C000DC60E0C70F81FE22AC7F295FBFC64F14F2
+:1010D000EE25B82E99D58BF44557DD79F2934097DC
+:1010E000AD294A3D7E17D135F3B2BE8B58F1533F3F
+:1010F000D6EED97ED2308C44A8FF3AC4F9C478FF2A
+:101100009713997D770BE78FAB9EEC3E701DF0F542
+:101110000A8B0BF0FAB33CDF66584F8FDFF57796FA
+:101120002353C40588BF60395D3B7EC781C4407BC3
+:10113000FA2833E24F2DE1DFF9B89BB89A63F12921
+:101140006CDB5708C8670E677B1518CDE6BC86A315
+:10115000B3E1B96211CFF5879D73E9B78E2CC4CF87
+:101160009FB5C0F9336ACB075789DA77B7884065EE
+:101170005BB0D4CCEDFBCF9E94E9AFCFF2FACC9329
+:10118000AF5A36421DCB51136BBFFDAA65C44AFA54
+:101190009ED008B68EB607054F9304D7A7D743FE57
+:1011A000B26EB9E029A3EDEAC03D5D10E25AF288C3
+:1011B0008D80ABF0F10F974E85FD9C7313FCBEEC58
+:1011C000DC04C6374A90F84DC9BDFEED0749C4AFEF
+:1011D000E54BE11C9D97EB9987E01C1B5DF7B5EA99
+:1011E000B7D4EF40DE94FABD10571BE461F9CCE8A8
+:1011F000A0D9E327E0EFB2FAC8961F08E421984788
+:101200005CDB0CFEB98DD7EB46CB35E83F0EA2F484
+:101210002981060D9975E7D8EA8882F41B5746396B
+:10122000231DAE7AFF38EB12E7D9E6DE343816F824
+:10123000E52F13F5E732FA8AAF6B57F8DE0DE0A71A
+:1012400083E757B751BB1DF6FB32B5DBE1BA9DDA38
+:10125000ED701FBE530D5738CF06D75DD46E872B68
+:101260009C67832B9C67832B9C6783E7E03C1B5C1C
+:10127000E13C1B9E3F2C540303013EC5D104F243C5
+:101280002D1646676A9215FD8D4021C1FC7D30C93F
+:10129000BA6925C4EB0486273596F50763949BB19C
+:1012A0009D3C96E577CD9E11708E7095305602FB71
+:1012B000A9D5AA60FDF289956602F5CBA169C2FBAA
+:1012C00090772182C92352FB66C757B721FC17CB01
+:1012D000C40475E92BE1BBA1208F3F259B587C2ED0
+:1012E00028C2F7E59A6308A7C73ABF4C65F669417B
+:1012F0006B1F52C09F9D043101A4DF030AF42F5ECF
+:101300002EF076D02F8F82BA06DEAF1E7A0AFCD777
+:10131000558676A7497B3EE52998EF68CFFB465472
+:10132000CB40EF295A7FE242689F8AD29EFF7C2100
+:101330009EE7D2D6A37E8AF38592B4F1A9D5D01FB9
+:10134000EAA9935B82EB0D0D66E3FF6D57E7D3E0EF
+:101350002FFFBDE76B56548CE3ABB3087926F662DA
+:10136000FAFA7892A88F87CA822E1EAAC5DF4D8E00
+:101370000543F1FCD90336948BA79208FA217DC569
+:1013800045C3E2F51817FDD524AD9ED910FF240AF8
+:101390008179AB201EE8C1B72AE1E7D388D040A00D
+:1013A0004EDD772646023BD29A1816BFE332A0BF25
+:1013B000786173038B0F06150B51937BEBFAAD0528
+:1013C000BCAE9FC70BB53A066BC1A3BABC81315EF8
+:1013D00048C465988FF62DD2C7032B942B8B172EFC
+:1013E0002001CB50A07F59F080FFBEC0A57C300407
+:1013F000EDFDABD9F719A5D7316EAA9D1B833BF044
+:10140000DDA92ABEE7B65B4FBC3F848EF3AF8C925A
+:10141000E030FEFC65C5F87C1EDD21C4B76A0AF128
+:10142000F02DC9FED4F3BA04F2D46DF23033CD7787
+:101430006F02D80B8B62316F72D35DE91FC03C8B9A
+:1014400055073E47ED4A4EEF2F6D047A1221701971
+:10145000D6CE1AA1D15BD546E0AF49715A3BE629F9
+:10146000E08762ABF6BC17DBF3148DFFAE790AF4AC
+:10147000C7D1128DBE0F54C3F3B3537BE643FA9E1C
+:10148000E4D0DAD317427F6BCF7C4B36C27CEFC0FF
+:10149000978DB03DF529E0E7E2195C5FA91F6D84E7
+:1014A000F95B1668F34FF0C3771EE79BB4E7A3FC24
+:1014B000B07E85686D2ACF68FB3DCEFFC70A5EA867
+:1014C000067EB9B1A7FF05DCEF02DE3E5E50F714E1
+:1014D000F4FFCBEFEF7FF87DC6F64D2438656856F4
+:1014E0002F5F18E5D56F8B981CF1D6FF1AC8952C85
+:1014F00068781ABFEF06F10096CF4A98E503796144
+:10150000173D943388CFEDC238A7719E9B0B595C71
+:10151000FD4C813E2FD662C88BF9787EAAAF798EBA
+:1015200014B1795A4B22FBB119D9257F2A80FA01CF
+:10153000725684F95C1460F07DB2964CE5FFC37D71
+:10154000CABAF8DD4D2AB23C709FFAC52AD899D3A1
+:101550002938210FDB54F438C6E9437916DDF7400A
+:10156000B43CE73AAB8CF2F1635ED731BF449E7274
+:101570000FF0FF30916CC23A0F27E61BCCC3AD4F82
+:10158000A35CE7794FED7B1CD32F712EC2782EA57B
+:101590009BC3FF5C419B05E4B34AD429A55928AFFE
+:1015A00083506F6C72ACC53CB0ADC88279042DFF1E
+:1015B000ACF0EF7F6B79DF49170632FD9EA6C5754B
+:1015C000FBCFFF2ACB77FAD03E68178949B8381F7E
+:1015D000BCD8A726413DCBF4D2183C2F5055FB0672
+:1015E000CE7F7804C1EF0447CF6AC0F341666A1F1B
+:1015F000CA00179E2FD6EA63465EB81DCF8DD66906
+:10160000F5E662F941B0536D8F513F0BD997C14553
+:10161000CB17CF30C8FBC50595A86709B5E347C709
+:10162000C27BFA3FF7FCF0A458A49B8FDA593D7FA8
+:101630006121CF97F03CF0FD1616E76B4DD1D3D565
+:10164000CF27317F65FD244677BB8A7E5E85F633E2
+:101650003179202F469E60DF8583180B9EB7327E3E
+:101660008F396D0EDA754F8CA45BA4B6B679F97B11
+:10167000185714D6B3E73E1D4F1AC06F319B599BC4
+:101680005E54C8FFE77A9599855097B5FC031CDF37
+:10169000ACB27AEFBEE237D5859ABE67F19BF9EE20
+:1016A0007D5D70AEEC6F8EE318CEBDFA24565FD22E
+:1016B000562069F946FC2E21255C0BD88BA9F9BE72
+:1016C000FA428C6F6D96601D9ABCD957741BCA275D
+:1016D0002247CE4B6B7CDF62C84BFBDCECF923AFBF
+:1016E000DD530D7F17A2AF3CC4B3C53D7983E5F848
+:1016F000FE782D6F20DF03ED5E3D4A37E4D5E9D15A
+:1017000085F5FF0BF4688FDDAE76A11DFB755B3FA1
+:10171000A5AB1710AF652C7EF6755BBF3C517E13F1
+:10172000F8F9BFFB3DE9137D5D00A7FB04B9CAC909
+:10173000927B1E419FE7FBA0B09F3CDFA5E20FFF1D
+:10174000176FE83FDE602FD2E7E1FF59E20D0E3858
+:10175000433518F928B108F8A880F1D1BFBADCA345
+:10176000FBCD2F827CBAB0D91F9DFAF7F7F753F360
+:1017700095B222D4838A6917A59FFB8AEDCC9E0976
+:1017800030F8F6C633E8FABDBA78C653F5FF0DF166
+:101790000CBADF2AC46F297FFFD71F7F77207C65B3
+:1017A000664FFC0BD2E703B8BFCD6C7FFF80F76FAD
+:1017B000447AF905A3975EF8303B290C3E0BEBFF0A
+:1017C00031F0791EE1B38DADEF6B80CFD7119E1E46
+:1017D000B6DE4BF9D7270A044D2E1FC27D66313A7B
+:1017E00038C5ED6BEA774F1E2AF5FADD4FE5C86F75
+:1017F00015313BF76891AEFE537E1BEEF7E3171FE2
+:1018000083FE087E7108EE7FDDFCE2D8429647EC4D
+:10181000CDBBF8D9776F49D5F5DFA0EFF980C21BB2
+:10182000E26D6DCB45B42FCE2712FC1E80666F840F
+:101830006259FDDEC5E7C14A099C47B4E5B1EF8CAA
+:1018400068DF07308B0B0606A48BE17A7080628517
+:101850003AAF25727A0B9C6F9DBCF6733C77659509
+:101860006DF8773547BA3D96BBC08FA67EEEB510B2
+:101870004FAD77E1393AED5C9976FE634960DE3E23
+:101880003867DB46E92181BEA7A2D472327CFF46CD
+:101890007BC36C681BFFAE69C2247DDE83C21FED73
+:1018A0009FF3EB597D5C9B99EC82FA8F3A55F437A4
+:1018B000D1F6336B05FC1EE7220A27F0F727B7277E
+:1018C000633DB935917DEF4CFBBBA7940EDAF3C0B5
+:1018D000FE3B2A12FC3B76FC3C99F69DEFA869671B
+:1018E000F17B5BA7E8FEE1FB3DDA772666703AD133
+:1018F000E019D5148770394FE142002EFCBCCDF4BD
+:10190000E52C1FDCB2607110C8BBBAE0F35591EA58
+:1019100052E6B8F5DF4B37C6338CDF1B3713DF4099
+:101920003857575150AC82BD6AE3F59AD144C6EF9F
+:101930005A9C5AFB63F65D8B528BEE3B22C6F746F0
+:101940001BE8D466883B18E9D4889772035E9E3101
+:10195000B3EF0CB6748A1E95DE6E7964512B9CCB66
+:10196000571F31B1BA7922E3779F5AA8C58BE7CFC9
+:10197000E962215E3F97C353C30B210D16E0B70503
+:10198000DA397453C36A384F3A8F9F43BF916CC69C
+:10199000730637810541DFBB1042E4227C5746B213
+:1019A00032E7C045601D7555EC3B1926D803E409A4
+:1019B0001E3121BFB6B877E1DFFD0A0CB3C49E4EDD
+:1019C00063FE44247BB627AE4021713A2C8EFF7F04
+:1019D000F1ABBF2D7E35B17010AB9B880AB8F29287
+:1019E000D9F726A09E6962A1C4CE2758941178DE4B
+:1019F00061C3272AD08176DE81FEAC18A2FF6EC2B9
+:101A0000C649FDF87F258584D54727879240AE7D5E
+:101A1000D0475DE5E1E29EBACAE72661FE9DDABFE6
+:101A20005920F798FD3B23D7F7B3496817B373CE16
+:101A30005A1CE933AFF24B185F087F3F270BCFE703
+:101A4000F8E1FC4E8553D82B48BDEF27C63AF6FF88
+:101A5000A579AB7BB8DF168C22F81DA46032A97A79
+:101A60003E023E9E29617644303D32BEB47E6A67B6
+:101A70001C9FC4FDA1018C28CE58F5F18193809F55
+:101A80003EFF0E1DC7E3E829F2478877DE7E385710
+:101A90002132D4F72ABEF701AFA7555102BD420249
+:101AA0000A7ECF6FFAF74557A4BFA7F8CF7EFD2F68
+:101AB000E87FAE8400800000000000001F8B08005B
+:101AC00000000000000BED7D0D7854D5B5E83E73A5
+:101AD000CEFC24998409061C24E849001B6DC0E152
+:101AE000279000813393842490C0F0A741221E08E0
+:101AF000D0DC5EB44111634B9B0381102222BE8B6C
+:101B0000AFBCFEE824185AEFB37DD4CB6745D48E22
+:101B1000012D5AD4E0851A2BA54110B1CF7E8F5EDE
+:101B2000E5B5CFE7FB7C6BAD7DF6CC39930920C6DC
+:101B30005EFADD3B7E7E877DF6DFDA6BAFFFBDF6BA
+:101B4000492D8B3AAFCD628C6952A0131EB53EFD74
+:101B5000E4502CB39B59E74478A88723F224C65657
+:101B6000B2D84F7540B986FEC558DB5DA77E3F14DD
+:101B7000DA4536A6A86C3A634B5607A97F11F332B3
+:101B8000199E6DD372181BC258C1B9C06115CABA6B
+:101B9000DF11906898F0778741BFF08A4CB50DC689
+:101BA00059560CAF0A183BE984E714F8DF98B64C95
+:101BB000CB87FE58BE8E3A680CCA4B065BCAD9D09A
+:101BC000F4186F5FA8FD35628C82F199D9DF6CFF44
+:101BD000AEC4DB9F0F66470C2F63B79BF550D6B1A1
+:101BE0002CFA33969E1354A07FBD24CAED9A629DB1
+:101BF000EFDA766D1A63679CF6F16BCDF16669AE2C
+:101C0000761C2F1C9BDFD5AE41F97402FC77305E49
+:101C1000BE557350FB95B1F60E5AEF594994C7EA79
+:101C2000583EEE12FDF39769B0DEED39BC3E1C1A4A
+:101C30001B31B2AF3E78BEEAF1BF303CD354A2AB09
+:101C4000C2FA5F945C0BFFAC6D6897752FD259F8A0
+:101C5000F70CE8D17844523BA14F21DB2B3399C0DC
+:101C600076C94097533489B5C15CEB4212F50F7BBE
+:101C70001D7C1EA328A2019D2D992EE8745904E70E
+:101C8000ED8FEEFEF4D29AC70CEB3A8D354B6D70AA
+:101C90001B636D702FEA82F6505E72F73FF811CE2B
+:101CA00025B9627D2511A4BF964CD1EFC38BCE7BA5
+:101CB000EAA56AA2F725B179E653FB25A962BCDB48
+:101CC000A91CC7E79D767C1A372EC3F9045CA1D006
+:101CD0009D84CFB02FB219F93DEC670103F0797BF9
+:101CE000FD0659CFB7F09151A5121FF963E5889D04
+:101CF0008F0A888F061AAE9153C23FD440CEB0BC33
+:101D0000BD6A78CC57B16E9093B86E43A2750B3A0A
+:101D1000AAF559E8DD03EB564539B0ACDE3B10F3CC
+:101D20007697D1BC1F01BE599C9F98919BC03F974D
+:101D3000375EB377B90BE15EA5495A04DA7F8EBFEF
+:101D400019F1E7E9699CDE019F2F6BF0648580CF74
+:101D5000747CCF488EEF9B107E95F0ACEA8E2E807F
+:101D6000CBA579581BE060DEE4F06FA83DDBE147CE
+:101D7000FC0300D4BEE5285390CF80B7028EA95053
+:101D800076B29ABD49E6FD69C841F3363356B117BC
+:101D9000E09BB8D1B72AEC8DD7E79671B8547CC2D6
+:101DA000B8C7D37BEF1802F3F732E6DB08E3371B43
+:101DB000C0BCF07CBF5E8A48B0E6F7B3C3738AA0AC
+:101DC000DC9DE3086C84E9BB1F708F580BED7B72C0
+:101DD000BC0184AE277347BA0FC67F3F209BF8BA79
+:101DE000E73DE4EBE3E9317E3250BF749BF83DA759
+:101DF000853A908FDF5179F967A56BDF43FE6279F1
+:101E0000CCC786021EB007F0AA236D9AC70DF3BA9D
+:101E1000668238C1BE3EA6BBA0DE8DF5B0C4798F08
+:101E2000EE7E74018E61D4BC32CAA2475D4C317A19
+:101E30003D34AFF2395790CC39293EAE6B67F3CBC6
+:101E4000CDA88FFD320B216FF9797B3FEBDDF0B927
+:101E500003C787721E43127CE97358BF6496F1F77B
+:101E6000392CD1CBC2153908571E0BA0BE9DA73BFC
+:101E7000CFC4EAF9639B32C98413E191D75714C1E7
+:101E800033B5DEDE6E761E943DF1F2AC9D7521C455
+:101E9000FB2C0DBA8D63ECC8CEBA681DC079A4D0F6
+:101EA000ED9300D3AE6CC5D67E36DBBB09F10E7662
+:101EB000C52119F0B2D49CAFD937EFF70CFAADCAEF
+:101EC0008312ACFFF87782E90559C86F72C061B61A
+:101ED00071087C306AE77470391D90A07DF37362DD
+:101EE000DFB40EE403394DB295832E513FA903F9B7
+:101EF000E2784CAE8E598EE5452305DF0CED403D72
+:101F000039234D94072D47BEED559CA63CBBBE031F
+:101F1000E559AB18CFD8457CFD3613F5691D484708
+:101F2000E198FC9BDB8EE55B7D263CC60F491E36A7
+:101F30006B5C9F4C7DE9D55EE30ADA037F16059161
+:101F40000FC35CDE25D64F391669CE30EDBAD16AA3
+:101F50005F7EDB1694898FC2DA9F65DCBFD206C034
+:101F600019EC5F498D74AC00E953612390EF5B9AE3
+:101F700080F74743F9608A4B4D47B9EE9BA925E1AD
+:101F8000DF57830E1AAF2AE8CD3AFB75683F814DC3
+:101F900040BA6B696A14FD0DDC5F7D942B9292D37D
+:101FA000FF38A74AB81CE8967C0BB97E9619EAE779
+:101FB000E02323BD452CDEEEC5122E0F5A26688B7A
+:101FC00083F09C03E297C11E6E98FE837008E63989
+:101FD00053E40CB889CFB4B790CFE69B34F4B04B40
+:101FE000630FA0DC2872FB36A2EC96F39D8D505651
+:101FF0008603BF62B982D3B70EFF7D9E8BE32A7141
+:10200000FA0738E635DAF9416116FA86FAD5C1746D
+:10201000BEFE9BD9CDB8FE079DBEA528C75A737DCD
+:10202000775BE5D9FE122EC79E36D7DB35FD9F6B59
+:10203000103F1F334700E5C79ED430C9B353198CF6
+:1020400075A0CED798EA1B8A7CCDD721E5DDCAB032
+:10205000FD8F6E80250C03381ADFED2E9D00EF7783
+:10206000F17EE7C6B20686EF155E8687618CC37681
+:1020700027A9DDD6602ECDCF1E0B783C48FBD01CA7
+:10208000F7DBCBF63AF1E9487B7E849E647FC4930C
+:10209000AD767E14C303F21268425CB7C474C7E71E
+:1020A000B87E53FE039D6E273AADE17A64CAB9F358
+:1020B000367A2B0DAAD42E91EEA0DFA3D46FA1E81F
+:1020C000C79CBAC55EDF168C443628A48F7E48EDC7
+:1020D000BCA08FB26CFAE8C7F43E411F4DAAD41ED3
+:1020E0000F16C4CBD07F3795FBF6EF0C26D167D007
+:1020F000FEA734AE47277CCD9BAC3D89E589D70B45
+:1021000079020D0B417E5C23CAE977D64FB3CA9F93
+:10211000C2C751DE2CD625B3FEEB8F237F1F0F09DC
+:1021200079736429CA93983C62358FDBE4119B7301
+:1021300027D6C7E40F5BF5188E17933F6CE6E328AC
+:102140003F82F3845E3BF3188EDF522BC6BF25120D
+:1021500044BBC421FAA744900F7526CA763BF27798
+:10216000D3FE65A9D56F62EC5F1ED32C7EC689694C
+:10217000758F931E3486B0D3820F72FBF2BB90032F
+:10218000827E847D78EAE093BA01ED5654686F59F7
+:10219000F7256667F672BB276E5F9EE7F6F7C0DB32
+:1021A0008FA769FE7C4E6F5FC1F8FFCB3ABEB0A728
+:1021B000E0FDBF59DF5F6DFE1CC0E70A21BD4FE4A3
+:1021C000F05D41FF8C10AE2FC0F5D4DF00DE6C9ABD
+:1021D000CFF403AE427C064243AE6AF84A09BE2AF7
+:1021E000BEDF2F6A313A2D4F4E07974DFF73695F5F
+:1021F0004AF9BA2DE3CEA7F755822FD4A4FE3AB4FC
+:10220000BBCDDE2ED6FF7682CB1CF722FDEFB4B716
+:102210008BF55F6EA5CF01E0F3D5D6FDFD0AE4484E
+:10222000238D3F8A8FBF328EC7EF58DFFF67DCEC0C
+:102230009274DE4EFBDEC0E9E932ECED9F60FBAD4F
+:10224000D25E3D83E24486C0FB3F23DEE17DAF0BDF
+:10225000DEBF65EEC79345E19FE17B2CFAC75BFCCF
+:10226000136309AD2FEE9FC040F9567DAFB75BF504
+:10227000FDA1505D3BC22B97F0F6FBBBDE5C86EB0D
+:102280004F2C835D7280D6930576C918B24B9EC7DA
+:10229000F2A5C605F8BBA8DFB39C6E92D4BF42740A
+:1022A000F514AF6F75713BF6EDDA8FC98ED3D6A8F2
+:1022B0000EB4E3845E3F1AE27E00D82315116F5FEF
+:1022C000BBF1684812783B4AE3EEE5F83F1696D337
+:1022D000D1DE8CD92DEC55F283E276D55DEDB88F49
+:1022E00071BBAA81CAD3CD7D3E13BA779909EF0994
+:1022F0008E07733D976EFF1EC1E1E7ED93D49FA556
+:10230000F1B2399CCC7BF80CFAAD44AFFC37CA0172
+:10231000E5556621E85C549C05764BD74E4945321D
+:1023200059B94BECF3FA769BDF68F2E162938E9534
+:1023300092E665185F58FC89E0FF437CFD313FB5AC
+:1023400099E07FC78C4F3C8CED397C9F12FC2A872B
+:10235000EF2B18DF55427619C74F0D339C689789CC
+:10236000F382C4FDCD287188FD4D2F213B99C355C3
+:10237000A34B64BF87579C7222BD2F3DC6B464F443
+:1023800031A4C425E24F43A8BFD7F46F033C2E9479
+:10239000D87E78492C5E359CE0F4F1F936148547F7
+:1023A00060FF69FAD192A17C6B3C688F864BA5488F
+:1023B0005B0EFA37DEB25228CF73B05EF2FB18DB49
+:1023C0008C715FF7F30A6B0B506B55B1C475804B82
+:1023D0007F8B7EE422739FE7B1587CC581F11A4B55
+:1023E000FC86FC4077C9FD793B558ABB50DCC6E5CD
+:1023F00097C9AF083EB482E223A9856E9F1BE7917F
+:10240000B3C9CF75FDD08C172DE4FEA503FE433B69
+:102410003AB59191FF36679B1451A1DEADD9E32FF8
+:1024200075EBCF37937FB782F934F01395427BBDBC
+:102430002BC17F6D99A087104F6777D539101FC1C9
+:102440004AEE879DDD35D28BFC97E8479F453F9A42
+:10245000A4541F3FDA7800E36B163F7AED00FAD1FF
+:102460008B4AC08F465964FAD1238BC2B7113D28DD
+:102470001AC9B7AEE953E693BFBC4D666E687F7A62
+:10248000E7C4370AA16C6C5302186E78DFA92DC51A
+:102490007A03FC69F97ADA2686F1ADB926FCA78BB6
+:1024A000CE9722FCDABDD70790DE4F3FE4263C9F53
+:1024B0005E99194983F132B6FD65530AF47F2532DE
+:1024C0001C836C31FF3AD10F672C6220DD9C6623A0
+:1024D000581BEE83E26338AED290113002717F7BDD
+:1024E0006E9ECFC0F1F4481AC37D8FBECAA4B379E3
+:1024F0008C8E1C908EE731D58985054C7322FE1792
+:10250000319DCAB701BF492371BE3C83E800F80E74
+:10251000E3774D13F4EF10BDFF88D307DBAEB4E3D0
+:1025200079C569E39174E4B33DA9F6788378B698E8
+:10253000FCE9413F7FCC80FAF90F5AE5C465C895A4
+:1025400047F87E727E7595301A07F4643DF279B7CC
+:102550001907DE9EC9E3277BCC3849E213183E0BEE
+:10256000FB7F513D01FAB29DE08DFBF11D08CF6567
+:10257000E8CB9F12DCFBF83A7721DC5CFEFCF7121B
+:102580006E07A819144F01513C89EF2FFE3E95F4B8
+:102590005FE07CDA5312ED578ACA480EB95938CA3F
+:1025A0008989E3117EEB87DAFB3D7BB17E6B827C10
+:1025B000FE3F16EA2FE0FCC5E78142A19DBB8AC71A
+:1025C000C1E77AA5972535DEEE38C6A192ECF779FA
+:1025D000538E42B3A803EC958733600FF2717F02EC
+:1025E00083505EBFDDA49D441BEE7853053D7B9474
+:1025F00006921F3DBBE4C806E8FA4613EB2E1DDD2C
+:1026000077DC9ADAE0C933167934B7EC090F08455C
+:10261000D69CD77158C278BDE656DDD0BF3B3DBCD5
+:102620001DE3F5C651997502BCB72EAC3C79C622A4
+:102630001F12C785F998012CFB61894C701F0CBAD9
+:10264000A333308E60481194072B8C534E8C572E39
+:102650006D5CC674D82757E12905EDC29AA08FDAC0
+:10266000CF2D94996181EBF149DA7B8867A08B3398
+:10267000B4BF81981DF53E96834E2DC3971F8F439F
+:102680008A7381174B9E22FBB83B93D1FC613F8B31
+:102690006C80F94BB465AE5E3C67F187296E7AB207
+:1026A00044A57957EE6C277852A7FD99E001DB39F4
+:1026B000EA18DC17DF820F8E9A786F31F1DE1F9EE9
+:1026C00095521ECF13E5B9654A3AE2F92D45A57337
+:1026D0008EFEF87B7EA97D7FDCFE0A5BB959BBD7F5
+:1026E00081F47476A71CC17D82E7EBB86F9FC0BEF2
+:1026F000B19CF838DDE9ACC6AA9FC5FECC29B5EF80
+:10270000CFD26D7C7F966E0B125E969656BA86F18E
+:1027100073B5BD40DB4C2F5CC6102F2EED9482723A
+:10272000ACBFFD027E1B568AFC6BDA8F57103FCF81
+:1027300029B5D8B55F757C1FE6BBA534899DFDB76B
+:102740003A5F10F4740CE56A7E5CAEDE56CAE5684A
+:10275000E253C8558B3D49714D0B1CCBEBAF000EBE
+:10276000C127C8A728374A7648CEDE7CDC7FE0D771
+:1027700031689F7DB819F35156F919D14356A94ACA
+:1027800074ED9A36CF85F278E5AE3F2BA8AF009F67
+:102790008B4B2D72B8A494093D544BEFEB395DFC83
+:1027A0007B9FEB003C77D3BED77238AFB673A7756B
+:1027B000D5E18DA5740E0472C98BF1789FD04323A7
+:1027C00078DCFB8B9D6FBEBFF35E8676E0BC3FA5D9
+:1027D000AB6807DE5ED4A9E5A849CF3755C976BEF8
+:1027E000591762E45730161AC62E79BE99787EDAE8
+:1027F000F7BCD378B9392B6E77279E77269E6BB2BC
+:102800007ECE3FFB9E771EAC2A02386705649FAAE6
+:10281000C6CF335DD3CE9E6063FB9E770E32F52E1E
+:1028200043ED6D596FCF08756F14F3A38679021DC0
+:10283000BC399327C5F1087AC0E38679369501FC47
+:10284000682FE7743CBA80D9F0E8223C7C413CD246
+:10285000F936E265A714D988FD950603E5F94AE63D
+:10286000537F1088EF676CBCBC751ACAE7EFD47948
+:102870009903F87F73D63D6C19B44F3D92C26468DA
+:102880007F44BD87F6FBC847E92A9EF7BAFD967DCF
+:102890003071A908F8E4BE7ED2DF601F3DC8727DAA
+:1028A000F651ED28453D7BB9FBF76451F803E4632D
+:1028B0000FE86B657CFC7DCF088ECFDE9B58A44370
+:1028C000EABB8F806F8DFCCE3CD6BE91EA1B18C64A
+:1028D0000736498CE33B812E1C69EB0D3CD7762DE6
+:1028E000F7921FD5DCD040F83E0AF8367C9CBFF04A
+:1028F0009CEA22FC25E88249432F9F2E12F7FDC84F
+:10290000CE3AD67875EF6B3FFCB9BB14ED9ECBDDAC
+:10291000D77953B59CB202EB3E6B23CB8658F9D6E0
+:10292000E07E0938C0E44F2E64AC33B3AF1D956F21
+:10293000E6A5C0785FC7F1C69431330EA88DC1F209
+:10294000821B5843B2BC976BCBB93F560B2622C5AE
+:10295000558C54CABBACF5EDF83DE5611A37A9D6E4
+:102960003CCC3ABE0476FCE1F61EAC9F0B8B756442
+:10297000D12BCACB14F80995E5D0B845AB4FBDAE05
+:10298000527580C67781F0473FB5165F523E098B7E
+:1029900074921CD0D97C90F777AC95289FB3C64829
+:1029A00063E8D7C6F32AF626E455F0F2DC6CB3DE12
+:1029B00078B1C37E8EF9DA72DB39A6D19BA0DFFE37
+:1029C00048FACF665F58F4D9072F7FB2DC50ACE7E6
+:1029D000989FD2F8276BC57CC1DDC17CEB39A66B13
+:1029E00037C223E2D4F0DB6D3DA704C8A92CE2C8AE
+:1029F000A933B53A8C87ED9BA0AFC0FD914BA406DF
+:102A0000B48F40C16812C56B7C1DE84F83FDBF12B7
+:102A1000EBFFDED70976485399E5FCE3EF0DFED3D3
+:102A200022BE6F1C5F8EF05DEDF002BE7F46F8AEF9
+:102A3000E0F8FE3B80F7605952FFE4AA81EF6D8217
+:102A40002F760EF1EF0ECF876596F38BAF7A3E6D42
+:102A5000AAF6BF71FD5FC13A1C33711D66FEC165E8
+:102A6000B4F7507BF3BC34B1BE69A6E93F98E7C424
+:102A7000EFC4CEF1AEADC3F17AE3E77A74EE153F61
+:102A800047CC1B89E78871F8F3687E718E189E79B0
+:102A9000731DE545F7738E391FEB4759FBDFB41BF8
+:102AA000F9AC2D613E9759BF6AE6448237BEDE0914
+:102AB000345F7742FB1A737D6B674EDD6D58F00112
+:102AC0009DA87D4C2E31AD0EE78B9F3B4EAFB39E44
+:102AD000DF7E6FA6B65B9CFFCF443A36CF69FFA37B
+:102AE000E363C14C1EDF11E7E5820E474ED116228B
+:102AF0009EAE367861FFEAADF4FF37986FDD4C0B80
+:102B00003F7DD1FE317E34F5BEC89F00FC1A88DFC0
+:102B1000A6723569BE84F013C3BD2C827ECB5416D9
+:102B200091F15C221CD019C641637C6D54125FBBCD
+:102B300062F723E6ED46F917BF1FD1B61BED8BB840
+:102B4000FEFE559D3DCF616E9DF57CBEFD955F8976
+:102B5000753F6AE593811EFF7BE576BCC4CA267E7D
+:102B600096DCFDDF46D8EF5F2CA679DE89DDBFA8B5
+:102B7000DB6DBFC7D0B0DB9EDFF15D3B5CACD50E3B
+:102B8000176BB1ED574679EB6E03CA2E33EFCDB517
+:102B900042EAE77EC572920BE25C17CA36B940E59D
+:102BA000EC8187EBB7828E4C3E8DC1D9273FEF9BDE
+:102BB000BBEDF9790333BF452EBC8DFC30F078E7CF
+:102BC000F73B04DEFBBBDFB15815E5C6BAFAFC2FB4
+:102BD0003F2FE6FF59E5C9975F07BF2FE24ABC2F99
+:102BE000C236D6D9E5CF65C3E72A4F2A7F2EAFFF7D
+:102BF000A0F27EE58F0FC76DF63AE83E8AEE674990
+:102C0000EFA33495F373A9187F9AF751163C9CDC17
+:102C10009FFEAEE94F8B7877D0757E85F5BC6B74DF
+:102C2000398F6FE796C7F25072697D8D1CBE00CA5E
+:102C3000433CEF610AD380A7162E18918DF035FF23
+:102C40008E8FC7FCE027A7C7C7AB36E713F3BC34AA
+:102C50002FBDC69AD730D69C27109F2F40F3ADE7E3
+:102C6000EB9007ADA67B5E31BFDAF831E1B5C5293F
+:102C7000FCEC4EE2EF78DCB883E4CE22B7A0FF276D
+:102C8000775BFD89DB7EFD14C9370C5FE0395EBCE4
+:102C90005F7BDDE5F42B2B37F5F12673BF8CD87EF7
+:102CA000CD44B82FD5DFE24747A5ACB81FBD6F8232
+:102CB0003607FB833F3DB7BCE0D2E3009E16119E72
+:102CC000D6DAFD114BFDE2725B5ED2F9D517CB4B24
+:102CD0005A61EE7B7F79492BCA6379242BCA2DE791
+:102CE0004AC17925E905182719E6487A8FE21E734B
+:102CF0005FE3F95DBFA4F5B408BE33CBDB3379FDE8
+:102D0000B77EFD6C9DC9576BCA2DE717E2BC85E500
+:102D10001F8E629CC7925FA439AC719F92534EA4E0
+:102D200087A5DBA4A4F9337DF8A5D51C7F5B6C1FB8
+:102D30009BCA797C5FC7B8E36231EE3736D0B835CD
+:102D40002BF8B8897CB3D5C4DFD6389EB6129EB4B2
+:102D500058BECD8358C69401F7F8F8F8E27E4FD0FC
+:102D6000197E01CF755A0C4945F9AA372EA3734530
+:102D700056013C09FB141C96BB0D4587986F5C05FA
+:102D80009F0FFE598AEDFCC042C630B06B2B96D126
+:102D9000B9F3248DE7AD4CAEDA200F5129AFE547EA
+:102DA000B8AEA285EDCDB8BCDB6A7F2127CB67E941
+:102DB0008EE5B3B0B7460D05FE36E1C37B216B61EE
+:102DC0009E7762F92C5565EBACF92CE12F97CF2259
+:102DD000E27F4B428057CBBE8D34D739B282E33588
+:102DE0007E0ECCE8FCF6465633EB268C2FE3BD2D49
+:102DF00078DD6DDE73BB90CD2278FEBF617A2AC587
+:102E0000F17A33199DABC28664544FC23C12FE4B1B
+:102E1000195D4A715C37AC0BD781E7B2D1AFC1F015
+:102E200072EDA068127A7E234367012FC6FD8DCD17
+:102E30000CCFD5F447E87CEE86157FAEC77997EACC
+:102E40006E15496071BDAF8CF2B856079CEB300E21
+:102E5000E9979986F1EC2AE77BFC9CC643789A5B5C
+:102E6000CACB022F6EA6BC67C58B92506E3CB16177
+:102E7000CB214B7B5734251DCF05DF2E4FB7DD2BE4
+:102E800062B297E8E082DF11C173A86E85752900F0
+:102E9000479D2ED3F97BE7B635AFE3FDB1A57E257F
+:102EA000E0807596344A94FFB5D8C7F1F49726634D
+:102EB000CB21B0615386E5D239CC059F87A2F12D95
+:102EC000B59D14B7077AE95630AFE70199E1B9B774
+:102ED000C87F9A67D28BC063CAB28F092F17F03CA4
+:102EE0001CF1529849795073001FAA8FCEF93721EF
+:102EF0009E525943F41A98F756BF83452D7168586E
+:102F0000BF2D8F0CC6A6BC3385DED8EA093FA90FBA
+:102F100094F07C34B92A8AFB7AA190EF2B94034871
+:102F2000EFAC94D3A9C07F6A029DBA13F2C312E931
+:102F3000B40FFE2BEC78EF5458208AF4764C26FB25
+:102F4000A277A7924179573B1D9477C55884EE31FB
+:102F500075B2C18136949B5189CE096E33F126F04A
+:102F6000CE58C3E6E518E76EC80860FC9F391A36EC
+:102F7000637ED4E2481AE5DFDDCEF6521ED41DE8AA
+:102F800021C3BC77329F0BCBCB59809E12CBA7FBC2
+:102F900025B7EA12F185CEA2D53701FEA2D7393383
+:102FA000AD7955FDE635C1CACF5ACE23465598F2C4
+:102FB000D2A3FB799EA76EDEFBD1283F28B3ACD409
+:102FC000A32791B7A545FAD72B0A2C7918BE064638
+:102FD000E7D345E1311543E2FD9F9AA08DC5F2E4A8
+:102FE00042ED166CBF07ED3CD0078B0E8F7D02F5CE
+:102FF00059CB046D3CD627CAABD3FDE7DF451B8117
+:10300000EE7A505E511E613EF1E140E5DF9555F4E8
+:10301000C9BF2BA7F598F977279DFC5E19E5224FCC
+:10302000657DEFA735DE46F5E27E5AE2BD34F62334
+:103030005E8605196DE3F0FE6E03AD5BE03D113F6A
+:10304000CCBC97B6C4FF4A8F347600F2D67C60DCE5
+:103050000DBB187D18FCFE72F59A9E2CCA235428CD
+:103060008FB02587DF5FDE844D30116814B7070706
+:10307000557239BE25B3C11F80FA2D4E9E0FC3F283
+:1030800074B6604C7CDC4195B238176A403A00BB9C
+:103090008FEC2561AF8A76F7997AA1B14212F7CE0B
+:1030A000EEC7F696FCEE46DA0F6F34E210E776FCD8
+:1030B00047E740C27E383EBC81F269DC5A727BA190
+:1030C000B922A6CF9B69FC9D429F6B9B70FC19D7D0
+:1030D000F816229FB94A64D6817A6CEE5D24779FF8
+:1030E000C1BC51B06926EB1B4A86C27E3F52619E2D
+:1030F00037D56722BA58B7C6F349A3C50D7ED47732
+:103100005B8625BFF77DB282DBCF13AF3F2FE3B8DD
+:103110005B9681A7320EF167501E9BB1086409943B
+:10312000C1DD3F84E7321EB4038A502FF2F6BE7A27
+:103130006803FBD865E22B7823D00FDACFA3EDF933
+:1031400048E229DA25E65B81284FC77527E6B98969
+:103150007CAB1EC5480F24817F6ED95A0FE56B6585
+:103160002FF7A09E6CD14A68BCC4BCB72DD96C04A3
+:10317000C29598D726F2A644BE9418F7B90A4E27EE
+:10318000226FCAEDE77A0B9E942713AD50CDFBBB9F
+:10319000F6FC36915F83ED29BF269BF1FC1A7F0375
+:1031A000C37E6E2863FBB0997F9698570572E8201E
+:1031B000D1411FFB88919DD15264E60D306DF332F1
+:1031C000B48FF0FC3690C4BE0281807AD005FA0933
+:1031D000EB15797505A6F27C593BAAB428DC83F07F
+:1031E000B9FC3139FB3B82372E67DF35E5EC09ABA3
+:1031F0009C75BFBAF509B4BBB7489C0EB700DE9FFB
+:103200004E421F1F98FCB6253339FD7C6ED26BCB26
+:1032100084F08738BE96C5EF777C513BB3256E6747
+:10322000723C0E909D09F8F8CC2AA7011FFF2F19B8
+:103230001EE0B709E58625CFD45959D07F9E696233
+:10324000FF2BBD277C0DC80DE43FF0077D95E40FF3
+:10325000723A16F2387EDFF6CAE4F53107C85180BB
+:10326000076D026BFBDC4A2EE7C64DD5732B492F49
+:10327000F3FBBE5B83FCBE2F8B6AA4F78FA7EB35F5
+:10328000C8A72C6FFC25E6DB60E6D3EAF56192F374
+:10329000F32FD17EA339BFB9DEBCC1A43FB64ADA51
+:1032A000AE54395EBED4FAAEABD42623FCCD7A98A8
+:1032B000BE97B025CFA11AB0B47F9AAC17E3FB2D0F
+:1032C000791B69FFDA80E024909B731CE71FCA9585
+:1032D000281FF85969103C3DE0B125A1EB59959C98
+:1032E000EEC18AA57A7642F35BE31C6B4DFD16CFE7
+:1032F0000778FA09EB3DA61595FB5618163D86F1A1
+:1033000092A793D0C5C24ACE3FB27B8D4D4F26B611
+:10331000BBB5D245ED56569AF10853EF2D72733F67
+:103320008A1D01F82C7A75DCD4D0EDB4AF063324B5
+:103330008B3E14FA8F6A2CEFDD7E7EFF841DB38FE7
+:1033400023D6799F49A7625EA0D755C81FA077BF33
+:1033500081F388FA4532E3F18E6E3BBE009ED59C28
+:10336000CED88A587E96051ECDC1C78DC1D1638740
+:10337000E33E733FC64DD5EEC371401FAFC3676BCD
+:1033800008E82D095EC71784BE8DF50A335A73739A
+:103390002E6AAF6EC076A26CB1579B2BEDF6EA2673
+:1033A0005C2FC8D1CDF87E4F6AF2797798F81AB0C1
+:1033B000EF065C269F3F88FF4CC22F6DBDFBD2C637
+:1033C000028BB9DDC6BDC497F9E32FC1579C8FEFBF
+:1033D000BCBE81F4DB0BA6FDF1829329985703BC98
+:1033E000154896EF73B452D81B91E18897E7FAB16C
+:1033F0003762EDFAC9ABFF1ADB9176257647DBB46D
+:10340000E36964777CD29186FAFDB933A1A476C7CB
+:103410000BD93B8627B33BF6F76377BC6ADAA7077D
+:10342000DF77911D517C8EDB1DC5E776C8683FBCF8
+:1034300059A9D27A8ACE74CB3AC05D8C76078CB308
+:10344000DFB43BB03DD91D9FEC9011AEA273DDD42B
+:10345000AF18CA687714F56377001432E2E1D9E255
+:10346000B67FC5FD4B5CEFBC897A8F956E0B7BBB3D
+:1034700029BE23FAB5E56D4CD369BFEDF4535AA4C8
+:10348000DAF2E20B7B39BD27B6EB8FCECAE4AAD6BF
+:103490005E58D75696BE83F2319586C7B16C180A2E
+:1034A000FF3E1E7E5F039EF7CF051832B15DC34F0E
+:1034B0007A51AF186E1F7ED7E02FA94BB99FB396F4
+:1034C000F99C53E37288960EA01921733C97C7D7D5
+:1034D0000C76D2F7D332088F8D3E11CFD951910B94
+:1034E000FDEFFFDA28BAF7137A040682F2D46332CA
+:1034F000D58BF8CFEBC318E5E703FFCEA986F127FC
+:103500009BE3839ED3EE85F68B4C3B6CA6ECA5F635
+:103510000FE6F1F6538DF3F5582EEA75A978BF8CB6
+:10352000C9EBE5BB316E8BF608B47FF0F9709907F3
+:10353000EA538F032438DE0917C52F447CA1E0D855
+:103540005EC267DA19972DAE910A122F6AB15B5CE1
+:10355000096526D70E4A269FC433310E71ED2CD350
+:103560001F1DCB6EF91CECAC0B6C7D2BAED13D3A24
+:10357000747037EBDB5FC419CE4FD446CC827D1C10
+:10358000E5D4C96FD95F01B8867DDABF73E7ECB1C6
+:1035900088F71D0AC5754F7E3B8DF6E9C0234A3B6F
+:1035A000C6934E029FF2F8ADB112E9F5403A13E727
+:1035B00040518CCB1D88DD67CE5EA959CAE35E2BD6
+:1035C0007C1FF5E08121A2FD8F79BD281BFFB4127D
+:1035D000F3360E0CE3E525AF3DD369101DF72AE461
+:1035E00057379EF626939F9366DBE9784EE11A4E95
+:1035F000C797E807F27EC6AC24FD52AAB97F75A032
+:1036000016401A8778D24B67015FEFEFB9A7750CA8
+:103610004C3571DAB7BB498E5ED3BB3699DC5F306F
+:103620008BDB53D1E208F95BE0C3737F97298730C6
+:103630007F750E53C7A35FFFF0F4E77E3316E6797C
+:10364000A368F47839095FDF3D2B97C689C37754A7
+:103650005E8E72E9A3F716269303DFAFD417DBD78C
+:10366000C3CF479B772884FF0766FFDF2730EF2112
+:103670005ABC83E277FBFFE460E8AFEC1FC3ED7E4A
+:10368000BCA187DFA51C00F8764E4E427700DF5DB7
+:10369000B30AFAC2377936E3F9A113B56F617D2217
+:1036A000BC2AC6B9015E30AF022847523EFC2FDD6E
+:1036B00018CFDCDFEBA0A0CA85331D3292605B4FD0
+:1036C0006E299AAB33AA4EC94852C5BE4736E3D1DC
+:1036D000AFBE5EB6F1DFE49E545BF98E866B6CE59F
+:1036E00025F5C3E3FCC8F01ED0485BD9EDBFD95621
+:1036F0000EB209B6F2C2AAA9B6F1CA7C25B672B951
+:103700007FB6AD7DA5BAC0569E9DB7C4D6BE3A5011
+:1037100067AB0FE78F53F00A1FD0E5F771BFD38E69
+:1037200069C4E75B7AEEF1215D448BC3E44F1F4F20
+:10373000EFCEC678F5EBFD7C57EED42CAECFEEBCC9
+:103740001E4C239493A0CF3766C6DB07737B6DF1C5
+:10375000F8C3B3B87D7A7056623CBEBF7B705C3FE5
+:103760005FEEFDB7443D3CF7A67B482EB52D942374
+:10377000789FAA39EF2D2FDE1B7B7D218F23B46527
+:10378000C33ABD948F41FC7570D16D23F05C2D352B
+:103790004FBF06E5BFD0DF257911761AEA537D11B8
+:1037A0003612EF9741B9CEBC675692CFDFDF68BEC5
+:1037B0005F854FD0DB332DF84AD4C741CFB897C1CE
+:1037C0005D60D3FFEAA3EFF72DCCE7F19ED24F2245
+:1037D000A5789F7AB6F6D2217E6D9ACB9F378AFF65
+:1037E00098D58FDE7ED3CEAF47891FF69F997F5144
+:1037F000F9FF87261E5F7FA6C9C3A2B0BE134D3E48
+:103800007AFEAEC94FEF8F36A9F46C69CAA367B4CC
+:103810002940F5FFDA5448CF434D1A3D5F69AAA00D
+:10382000E7E1A630B57BADA9869E479A747AFFF191
+:103830002CCE97570B3C5A9E8827840F3A24C2EB14
+:10384000424CD59D724E93ADF21DF0FA6932BC5ECA
+:10385000A91E8916EF1D1EE67A2A291F0D9D2DEE41
+:1038600085713B798E4E323F069F0BE37359F1F819
+:103870009C1B4D9AC104E7A0D9050307E701337EDD
+:10388000732093D53CCDFDBA4D12E91BDF382ECF06
+:103890007F100E913C1F322EB93CCFE923CF979178
+:1038A000DE6287316E8A6945288CD7E1FCC9E32145
+:1038B000C6A09C8BE281CE2B051E2CFB15B8123CBA
+:1038C00024AEBFB4489B8CE3E03D14E7E0BE7AE44D
+:1038D000C6DECF348C493D9BCFE17DF8BDF983D066
+:1038E0005E7163308AEC1570F00A71BF99698FB40C
+:1038F00077D667F71DE70FC57B49AF3F18B3739EB7
+:10390000203B26B11DFC0E111E506F59F090440E45
+:103910008493ADBF4C7EBE7723F43FD0CB285EA608
+:10392000A24D0DF03FA7F0EF341C38E7203C5FF0CC
+:1039300048241FDD0FDCEBC1D8F6B3DFE5ED8C6A60
+:1039400089EE2FA475ED57D14E0DF6EAD7E0F7C6F4
+:103950000AA3954EFC3E6868DAB8408A850E428A12
+:103960005D4FA2A51AD33B140C1B9C50BE2EDE5EED
+:10397000C6FDCF8D9773E8DEF53FCE063A9D7FBE3C
+:1039800081A9F9667C35399E564B96789BC202AD6B
+:103990009373C8EE3C741D9EDB8C661199E8CA20B7
+:1039A000FF5BC02B7BC3742F4FF8E99F4ADAFDB34E
+:1039B00093D80FAC5EA37337E670D0B95BD304BD68
+:1039C00069369DCF279CCBF85EF93F12E8B45607C5
+:1039D0008BA27D6164B8087F89FB35B9B07213AEE4
+:1039E000CBFFA5FDFA1D92F53B0137AA33C89FBA5C
+:1039F00000FE14DE436956F8FD28E3447AA4938060
+:103A0000647968B7DD2FDF1CC0FDFF7EDAF7C83FA1
+:103A10006A047F0BFDAF6DA61CBE3F35A383818278
+:103A2000DAE66CF81F58DF22B17007FA5B29D74736
+:103A300058461CAECED95C9FBBD91D8390CFBCBE6F
+:103A40009927CF4C48E6EF71FFC419DBF76C1FF9DB
+:103A50001B66D9EBD2FD98F7D8326EF52EBC8F6578
+:103A60000CF1F0F34E25ACCE03FC3C64DEAB653EBE
+:103A7000836559EEEFCB4C398BF1D9563066F07C2B
+:103A8000F79709F038AF101E174A18F447B35C11C6
+:103A9000CCAF51511E015CAD7E07F1CD2695F3FDF3
+:103AA00026AFE6F125D9B72D884777FFFB29E76CCC
+:103AB000F2611C7B87D7417CD9AA2A5B73A0DCEA20
+:103AC00055F8F75A554745B27CAD8F6673BB099AD6
+:103AD000A4507E53703ED931FDCDD366EEA728A702
+:103AE000E6EB1AF18F1A08E37A9ABD5912C63745E8
+:103AF000FDAFCDF1459C78AB6917A5E6ED8D62BCB5
+:103B0000A665D8AA09882E0FD83967E1BD277F2F6F
+:103B1000D9452D433C35C9CEBFCECFE671B6ADCE2B
+:103B20004005E2736BBA831980BFAD39C9F5608F68
+:103B3000B97FCDEAF830D12DE063B4D4B7DD6F4C56
+:103B40007DB9D9B9C38FF7D0B68EBE95F2BCB68E0B
+:103B5000E072B7F1C889CE0DF9C80FDF62FF86FCAD
+:103B600090A5D0BEA92CE041FDD5E2537CE8EF4FF3
+:103B7000CC5AE7095AE497A0FFED6887C0D3396CA7
+:103B80007E0DD2E385C2D40022BD4C3E42DF0969DE
+:103B900009803CCDC13CA4069FF5FE3FD8D37215E9
+:103BA000C0951E70D8ECED4185767F4165BA87E8F7
+:103BB0007318A7A3FEF62F111E2F4A9CF117699FB9
+:103BC000A9D724FB2EC9B82A8E574137CE4BD0CD6A
+:103BD000A5E0B7E9BBECB8BECBA91AB10ACF2F1E3E
+:103BE00062BC7EE491F39DE8AF2796BF2C7F362B15
+:103BF0003B481E378F72113D25F6DF9AC3E1F9600D
+:103C0000F647341F861570DF323D3C8EB4BD7070B0
+:103C10004A32793B6BA25E5465B18B324BF7921EF0
+:103C20001D5CC5087F5E35EC1B05E3788FC940A39A
+:103C3000806FC7677F3DA55E391E951D0D2CCCC7D3
+:103C4000233983BFCF40BE6598FA64CB0D6F30CC6B
+:103C50009FD93E5209C89487702470313BDA5B6863
+:103C60008F137DD138504D95998F92C252781E5046
+:103C70005548A1FC1B07D79F1AFC3FD4BCC22E9904
+:103C8000FB3FD43C5A52F1158F7F65D5325A4F2CE9
+:103C90001F05BF2783E3E88CEC0CBC108BEDAE5BFB
+:103CA000CDEDA86CD62BE1F9DE0D98952323BD73DD
+:103CB000F97981653B281F07A6C17C12C97090BEA7
+:103CC000FBAF379C9482F0767BD1AA71B83F89EB29
+:103CD000585365C6B362EBB8381E049C034DA74227
+:103CE0002F377BB89ED54021A7A0119C10D72C93CD
+:103CF000D7535CB3C570FB500F372BA077B3A877B1
+:103D000098E2A00971CDBFA4F0B8A7B48EF9A4229F
+:103D10008A6BE6E13E35B2D400C61D0729BA07EB2F
+:103D2000D346298CD355C3643C3F89FBDBAA97E774
+:103D3000BF35529EE0AF50AF41BBAECF2E2E8FF6B7
+:103D40005D42AFB51D1BE5A5B8B9A72E0DFDEC670B
+:103D5000FCB947D06FB9E0E1F95BA25D57C2F74CFF
+:103D60005A4C39D75365C6C753FE2263FF197E5597
+:103D7000C13CB990671CC9F76629F93940AF29DF02
+:103D80006E54DFE474B65A7C876C35C9FF77D34D27
+:103D9000FAADD79750BCD8B4E398A6A9BE4971FB39
+:103DA0004DE84BBFE233EEC271CCFCA93EEBECFA1E
+:103DB0000786DF57617E4BDC3517E71F14CB9BC3AB
+:103DC000F913EDB6FEF0D966FABDCDFE10E55D5CE7
+:103DD000409995E45C443CC1FEEC463955D06D9762
+:103DE0002F697976F9D2EA68A03C2EE366E6C33CF7
+:103DF0000F5615F05BED5FB0438F571133DBEDC904
+:103E0000FBAAB9BCEBCA54158CBF9478820CCF1BAB
+:103E1000946C9DE17EB8FC818BEEC7CFABB8DE6FB2
+:103E2000C95B1E467FE5E1E9DF24BC4CACE079A527
+:103E3000A21DE8CB0FAA2C7E8BC83BB8ECEF23F970
+:103E40001C948F78B9F1A1B6692BF9F791FCCBE9F5
+:103E5000FB48CF78F8F791BAD2F534B4BFBEE8F793
+:103E600091EEAEE6F41AF27CE3E08C5C0B9E7A7481
+:103E7000CA0771F9CFD3B9CC0C337F24310EE47665
+:103E800037D0395AB4B86189350E2CF0F77393AE38
+:103E9000FF50AC539E4F7F7FDF41B4438CE1BADCCF
+:103EA000669C734BF1B709FFF32B3229CEA49871AE
+:103EB00026D7799DF27A3B27EAD7565BF49D3BDB08
+:103EC000207D97F63DC6EFAF7FCAEFAFA76D6421A7
+:103ED000BCAF1EFA6C3C9D3F85A229C467D33F0945
+:103EE000D0F7A7CBE4A75A73A1BEEB9842DF85EFCA
+:103EF0009A9E9A857AEDE363DCBE4DEBBAE9C82D54
+:103F0000502E3E5687BE3EC81D806570DF754CFF43
+:103F1000C4F1A5FCC702F41F2DE72062DC5F361D4B
+:103F200026FAD8D7D44DCFFD4D517AB635F5D0B35A
+:103F300050D14A703D85DD7426C9A69C817A0B1C40
+:103F40008527A0BF851E864CD4B56AE2BF6E5BBBD9
+:103F5000B4BC1E5B3BF05F4BAB0B308F87E3D3856C
+:103F6000DF0D83F1E7F6B0CD92FA1F4A5EADAA1ECF
+:103F70001879F58FD505179357FC9C34D4637E27A9
+:103F80002C811F1DD52AF90D31BE34CF4B859E6E75
+:103F9000C57F823E6DCEF826976FB17C0C7EFF50B8
+:103FA0007C677EE3EB1FEDA1BCD277CC7A83FD4426
+:103FB000B3D433F6C92ABC0FF2123AAF60879E7BA6
+:103FC000BD6B15DE9BBEB52653D100BE123C58CD4D
+:103FD0008CDF7F11798A8978FB9FD59CAF8FE7FAB8
+:103FE00028BEDE92CBFF5E4162BB37ABB9BC409AC4
+:103FF000B0FE1D8FD47EEEFDBC2AC635F1D6EAE2B6
+:10400000F907FDDDEF78ACFAE2F73BFE60D65FEA38
+:104010003EC72FCD795FC4790B282F720FD285F858
+:104020003B1B51F37DECEF6BF859D2717E6ECADD0C
+:104030001BE7F8CCFDD414F33BD47B893ECCBF877F
+:1040400020EAA79C8BD5EFA3F9627FF740A7F88FF2
+:10405000B85FF7F3EADFEED960F99E574BEC3B8986
+:104060003C6FE95313FEC4A7B85F12FB1E147B6BB1
+:104070008F66F91ED44FAADF396B7EAFEA10C16795
+:10408000DEAB79348E875FD3FB84EF0374BDFEDA39
+:104090001EF33ECE6FA8BE21F1BB5BEFEDB1DEEFAC
+:1040A00079B4FAD42AB3FD515AA7F99DAE247461AC
+:1040B000D2ED993D789FF032C67B97C633BFB3B53A
+:1040C000D9E4A3FEE819DA9FA2F6B1EF0FD7795031
+:1040D000AFC4EFF1BFBBC7F6FDACFEF1F5475AB771
+:1040E0002EE665667E13E717911F26E8C23B87EF31
+:1040F000C776931FF0FE1FF55F316078F88CD69578
+:1041000070AFE852EBD837212CCF4138FCB1FC62BC
+:1041100085CA5F121E711F2C913F86CF91445EF3BA
+:10412000609A273BF61DCE6B06625E1877048D13EE
+:10413000FFBEE7F57392CB9F2F342E532F2F6F4482
+:1041400094FF3F19A999BA607100000000000000B7
+:104150001F8B080000000000000BF3176060F8518F
+:104160008FC09C687C5AE3BF4C0C0CFACC0C0C97AB
+:10417000D818189C39191884F8C833E7229ABE7BDE
+:1041800040B366F030302C636560D809C47A5CD8DF
+:10419000F5D90822D847817E5F01C417E91C06A320
+:1041A00078F0E01A11068649A208BE9E18AA7CADD6
+:1041B0000882AD2345995D4E40FD008850BECB80FE
+:1041C00003000000000000001F8B0800000000003A
+:1041D000000BD57D0F7C54C5B5F0DCDDBB77FF2728
+:1041E00037C9029B10E24DF863D04037103058D4E5
+:1041F0004D041A90D7AE69ABB1A576A14A151156F8
+:104200006B9567D5DCFCDF841002A202455954107F
+:10421000ADB6A9A2B59FE5BD0D508A7D7E9FE8533E
+:10422000AB56FB62A5B45AA5F1594AFA7D086FCE88
+:1042300099B9D97B6FEE6E962A6DBFF86B87B9F38B
+:10424000EFCCF93767CE9C99956C6E52760E21A70C
+:10425000E1EF12421EF21242C6A4D2CAEF7DF986E5
+:1042600027AAE8BFBDCED04E9A54FE626E71B4222A
+:10427000557F1611B05EED2F96FC91D07AFF4EEC73
+:104280008A937EDAE71FF486685E15EC04DA394912
+:104290004DC1BF0468F9902DD445F3C993361FA1D1
+:1042A000FD4C2776E8842844F645A6D1EFE29773C3
+:1042B00089AE7F737AF16691240B08D97F27112389
+:1042C000B45E9BFF8225033E425E6C4CFEE5C864F3
+:1042D00042C2C9A9A242FB39D07808F3FFD678F8C8
+:1042E0002F471C8444491E8E533BF72371296DB719
+:1042F000DF411AFA68BBDAB0E058AA1B2FCAE7B34D
+:10430000DFCDCBE51AD1B2DC4FCBE9F7DAC0E596C9
+:10431000E5513A23AC97C7FB191AB0433D850C7A97
+:10432000719E27EB2DE7398EB7D3F255036CBEFB98
+:10433000DE3E7119D0214972234E484F96BD05F8D3
+:10434000EE77090A29A5F81D5884F84D027E6917F1
+:1043500027DE61F8DEFF892DD444F15DEB927D21EB
+:104360009A2722A5072DAFF59130C225D294C271AC
+:104370001987FB2A9ED6438A7451902EFD2E4A1728
+:10438000DFE8F05EB2594278B579F6C33CB368A76E
+:10439000D1957EF545FCB41DB1E68391F8A1E3CD3E
+:1043A0003C733835BC46E6F6FFE5888BE0DF69FAFA
+:1043B000BFF9F2F37F39529ECA5F3274D890A71CBE
+:1043C0004D5CB329BCF04F0552F1CF035A79292B2C
+:1043D0008771E28DCA9F2751FEEB6D247F9E44F9C1
+:1043E000AFA7D185F9EE4619F35D8D41CCC745DA0B
+:1043F00084D231DE4D122A6D9F17A6F575E3E5567E
+:10440000D3763AF8FC21D990F796070DF5DD8A624C
+:10441000288F2B37DB1294EE9D15B6845D0038A8EB
+:104420008C9C0B70B830A5E0BE16A4F399C49A908A
+:10443000750EE5576500CF4B76D24CF3394AD8B6A6
+:104440008CE64B82769208D1F1730609A1FDC5EF87
+:10445000246423EDAFBB72B66D19CD77CD71CA76EA
+:10446000999004ED3FEEA4FD9C4A2A2DD0CF34292B
+:1044700004FD905EF1B7802717FDEF741921131525
+:10448000E91D5B0E21A52AFDAE9F9F530D825CE7BF
+:10449000561BBF4F5496DF4868FD8944F7BD34452D
+:1044A0004F6D5C2D6F1ECF3CCE396B4CFD9BFA2DB2
+:1044B00051066AE48A54BFE790C126D9F7CFDC6F72
+:1044C000B856003A858892A83C7B70FBD67C9C77D6
+:1044D00064660ACFDD0EA607CDF236406CA83F8891
+:1044E000388684295C8A624B74D17EBA4A6DC83F93
+:1044F0004A1B4980DE5A37E1700CF25DA592D24C1E
+:10450000F3A5E5071B84E984AC9D2023DF75ED75D9
+:1045100092E610832340F9B444E3D353033565C0D6
+:104520008702096DA4E5A5CAD126A82FBFE6511CB4
+:10453000D523E747D6B0F9639ECE7F10FE316B647A
+:10454000BFBF9C258523C0B72A4938293C9D939A33
+:10455000EB543ACE03AA48407EBAEEEC7B1DF01C29
+:104560009FCCE035CFBB449196025F13FDF874BC3D
+:10457000924957DC00F332C3A1E98BEF37CA288F89
+:104580005B1ACB317DA051EE033DB1E513BB257E17
+:104590002F13987EDEEA88D8003E758E2DB113F574
+:1045A0004F74EBF5347FFF77C7CE8075E0E6393680
+:1045B000D42F7FEE66F8BE5FE8BD8A607D49C1FA00
+:1045C00026F97F400C377F8BD6BF3F5840542ACF07
+:1045D000258EC30BCF85FED69455AAB4BFFB6FD9E9
+:1045E000F80EB42F993345B1D3F613AB8FBE4517F0
+:1045F00071B2E5D44030E2833C93EB923563FB2605
+:10460000513E19AFF4DE04E397544B4AA234C597E8
+:10461000C52484E39CD3E025497974FE2C5E9999E6
+:104620003FCF9E1EF8FBC85511C855410AEEADDCC0
+:104630003E31D37DB160437E1996AB6A26574F5EFB
+:10464000C8E8ACC9D59609BDEFE5D27CCF37189F35
+:104650009AF9BCB4FA680DD0B59BCA4F7E909042CF
+:10466000A7F2B140F33D4BB91C561F1596D3F67F08
+:104670007AD5A31090A725D6FA3A1D3FA752E3B8E2
+:104680000FDC62AB8DD07ABFBC76CA1F9D30DE12C4
+:10469000490139EB11CB717CE5BB92A2EAE859B232
+:1046A00084CA13E5AF925BB8FC98E46AB4F1E38D79
+:1046B00009F22E95A30D8D4112A6745BDFA8A07C94
+:1046C000ADE37206B62829A4792E67A47C06E6D34A
+:1046D000D99F8434A1DCB994248952FA6CA07D93CB
+:1046E00022F89E0C87E712920FBAEA42042769A3C8
+:1046F0006BFBFAE17212A64C4F7A049E57FFA88614
+:10470000E9787288E59F6BFAA3DA428570839BE5AE
+:10471000F70AE535EA5C7DFB83D8BF569FE693B583
+:104720009374FD41FF157A786C35505FEBEF8DA6E1
+:10473000A21A958EBF9EE7A5E63C963FCBFD770B70
+:104740007D41CAF464ADA99F6E81E349FD8F70D8A5
+:10475000971AE73EE1BDB06A28FF4318F0A495FF21
+:10476000A0E93F5495D6FF8844B608940E33E64539
+:104770008B08A5BBB72E49C094DA60C2776A7E2F3A
+:10478000E1FC7C152CFF60D32761C0B756FE8CE09E
+:104790006F027C03DFF8C6121244212164F3CFBB01
+:1047A000AF7F01FE5D9E4FC81C3A8ED24B14DA8754
+:1047B0006D524C807D47708978D4200F9CEF287C07
+:1047C0004F08349D3137FA35580A2DE053F5F0691A
+:1047D000E38F06AF06477AFE64E39BF9A87641F5BE
+:1047E0008B73A97C790F3B424E05E6210BA0C7F3E2
+:1047F0000128AAD7F24EED473A11B12F0876B4B985
+:10480000DFFC794524A19BE7674DCF2D9067787B2E
+:10481000454F579A7F4D8FC727A0DEAC917CA7CD1F
+:10482000CF0DF3236007D3F955E9E7F75403CC2FF5
+:104830001DDECCF35BEFEE6D8858E8DF8B6D7CBF3F
+:104840007B71F597A07F3A1E01FDE5560651FFCA20
+:10485000301EDD6AE69EDADF005BDB74E3C973E9D4
+:1048600078E5670F9FA3F1B18FEA2F85D6B3853224
+:10487000F3B1599EB5797B61DE02F011DB0F98E749
+:104880004D08E523FFFFBFF3FE5864F4BC85F6AF87
+:10489000B27931F9F807CDEBE3170A505E011E3B00
+:1048A000E3E7A0157FBD2B28867DAE99AFD3CDEB76
+:1048B0001FC5A723E79519CF675B0F65AB5F9B5FAC
+:1048C000F3201E7BAE61FB849E43F3D1EFD0F3C295
+:1048D000A5E3008E9CF8F9244CEDDF29D03FEDAF25
+:1048E00047B32F36578DD23FB32FEE6B247DAD9358
+:1048F00009793A6700F7C3144E6CBF95DA9F09AA8D
+:10490000E0AA5EBAC5BD948EB7F5BA8D6EF02BF5F0
+:10491000707BB1EAA587372CA0F81C776D7EA59D2A
+:10492000B2428F5BFBBEE7F929F4FBE66BF877EE4A
+:10493000BFA2DF5F82FA415E3F1D5C85D2403482B8
+:10494000F242E1D2E15F2B7FCAC6ECD227C1CE3A58
+:1049500017F633CCCE2AF4F42E05FAE66C959407BC
+:104960008591FDFE6FAE4FEF033B8DCE77CBB5ED5E
+:10497000456057EDDB317BBF0FE0BA86A03E3F3785
+:10498000B1ABDFA1C0F8AA00787ED241343B0BD78F
+:10499000F9A26B34BAD60B974EC276DCCE62F9EF31
+:1049A0000FAFAB5F47BBA538CAF2CF347FB7A64580
+:1049B000D495ABDFAE0917A7CA5F6CBEB106D6DDD2
+:1049C00019AEE89B7329E96650BDD742E198212AC8
+:1049D000F618F0CBE680A5BDB8FB79574382E277A5
+:1049E000F78E2913AFB55847281591CE5A7EE62188
+:1049F000A39C3D09F873021E99DDDA4DD10BF583B6
+:104A000051A505F039F31009C17E349DBE4B47C74F
+:104A1000E036A3BE9B211AE775B6E6F31191D97E65
+:104A20009BF74FD7F5976D6C3E7690A3992293FF35
+:104A30004F3B9F24E089D911BFB1EAFFEF35DF1961
+:104A40003E3A4EE0B31F27681A275DBF667DA5D6A4
+:104A50001241047F7C1109013C79F36204FCF87671
+:104A6000DFE1A04AED3D511EC0D411180CAA54EF4D
+:104A70004A41A510526771A810BED3FD11978F8EC1
+:104A800026D4ABC3F9CE26D0A3EB218FF2B716CB39
+:104A9000370EE7D761FEEE094C3ECFB1DFD30F7A78
+:104AA000B80C940D856B5DFF1B0DE0072838E00BFB
+:104AB00081A951E00B11D0C35A794FFF7B4117D820
+:104AC00071077CC44DF93D5F0E137DFBF5FD7F0D35
+:104AD000CAB4DCC7CB7D8188A17C63FFD4C22045EA
+:104AE0009187977B82512CBFBB7F4EA10276CC0170
+:104AF0009F0CDFBDC5311CF7D25FACB4A13F76B1CE
+:104B00002DE1D4E9ABF8E219A8DF9708D1A9764ADC
+:104B10008F9A5F74BBC07E881FA81807DFD1E6415B
+:104B20007F92F87F613F0AD9D36807F9E4A3E7735E
+:104B30007AD953F4E886F30AF403B3738A383FA7AB
+:104B4000506B9349185FCD6174A21C9DF23F63FBCB
+:104B500043297F35E60F1BF27E3911867DB418A0FC
+:104B6000FA81B6F786D530D05D2A6679BB2F9404DA
+:104B7000FDB1F91B2404608B149F507FFD1C9A57D4
+:104B800080FE116CDF398BE5A56054857CBC92E515
+:104B90009DC5B124E4D74E65F9CD1A9DC9A3463E03
+:104BA000207F42BA770EE7DDCD501ED7F886789B7E
+:104BB000A17CED454CCF168935FB00FF9BFB3B0BE1
+:104BC00097D3FE73811F68FFB94B42482F8D2EF794
+:104BD00029365C6F35BADCA7CCC07382CA5C8A09FF
+:104BE0009C9082F4A83CE7669B0CE71DE7DB123B38
+:104BF00005389FEA760FD07A9BCB6760798968E7A2
+:104C0000FE01E60FDFC9FD0165D4BA00BB63275F73
+:104C1000AFF7DD332517DAEDDBFABF90DE17DBF3F4
+:104C2000B0DDDA72767EF32C5DA7C14FF74CA30B93
+:104C3000D31FD1FEA2545F3FD1E8C2F4078D32A644
+:104C40008F523D0E69372D4F82DF81962769BE6FE7
+:104C5000C05607F27F4F2335CD68FBBB1B5D1F8B12
+:104C600093C15F21637E7D6310F3DFB6D5AFB133AF
+:104C70007F8AB782CEEBE99727A17F2FF4862D920A
+:104C80008079CBA4607155EABB869F6FDB6AEF0425
+:104C90007EFDE18088E31071A0EB7CEB7ACD506F54
+:104CA000FA1B22EB2F30B0F1B28065BD0EA8F7F8E9
+:104CB00011063771253D69FAEB06782BDEE6F00523
+:104CC00093F969FADB00F51E3BC2E1F325BACEB3D6
+:104CD000AE772F8C7BDEDB1CBEE2C4C645D6E37EFE
+:104CE0001FFA73E5337BE573E0CFA8C2756087A038
+:104CF00093E74D4B55C146E9EC2A188841BD6955EB
+:104D000031A18C8E1FB83A26D8A6313BC346F36E2C
+:104D1000E887A6E797D3725A6F1394FB75E5D09E88
+:104D2000A6532B5879E09BC6F261BDDD40343B357C
+:104D300009CED6E0578CF92936A61F9FB3FFB606D9
+:104D4000F87D8AC4CAFF1BF260772D36D5F7B0FC18
+:104D50006FB5FA39ACBD4D6479573E9B77CE565747
+:104D600002ECAE0DF3DB83CB7CA9F9E62D889743EB
+:104D70005E9BDF86055B83CB74F3C9FBC2B6F2652D
+:104D800015E9D715B7622361DDBA3BA5B782840B5D
+:104D9000FEF9F5CB5775EB06AC2BE3F8BA30AE9ABB
+:104DA000AD2B146F2AB35719DED65F64C45BEEC512
+:104DB00046BCADBFD888B7DC4B32E3ED977CFC74C2
+:104DC000F8A3E387F5E36F5C681C3F7F9171FC8D6E
+:104DD0008B8CE3E75FF6A9C74FEAF9A6B7C638BEE2
+:104DE0005C6B1CBFB7D638BE7CE9A71B5FA34F67BF
+:104DF000FF16E3BA5E15217AFAC5FB3B8386753D43
+:104E0000C4D675AD7C6DFF4F83B0BEBB617D07FF1F
+:104E10004C395BDF2BDFFD28087EFBF5171D0CC22C
+:104E20003E633DAD7BB822B56EECBBE856DB63B4A8
+:104E3000DFEF4C65EB4CFF45CFB840FFAF2D67EB84
+:104E40004C9C9FE77635268FAF74A4E6E58FBB7147
+:104E5000BFA7E587ED25F2BB1AE0C378B98DDB4B20
+:104E600085CD616A8BBAA68A867C67052BBFBDB5E6
+:104E7000B059055F8AA816C23AE42D277FAEB0D894
+:104E80006F69E36BF0A41F9FED8B53E34F348D3FAD
+:104E9000D130BE96774F63E5AA38A916E0D9CCF792
+:104EA000CDB788BF43FD72F6E09BD61C9EA4878FCA
+:104EB000E553F0B1BC06DF5DE2F45A75D2DF13BEF4
+:104EC0000B4CF8BBC084BF0B0CF85B23569F11FE44
+:104ED000CCF5BA4DFC790309DF268E013922686FC3
+:104EE000C644999F07B1FEAA442E5F303EC4ED2C04
+:104EF0009512934B59793D5DD796887C1FC6EBD7A9
+:104F000099F29AFD0ACBD169F4C358DBAF12617AEA
+:104F10009BDA1DA19DA8D743284FA97D07F363887D
+:104F200062241CB1D007F78AEC7C5890430D00A78F
+:104F3000E893D08F9AAE7EAF2870FB5A359CEFE491
+:104F400092C1A41DE008128C4F2227BFAC5C3E6DBD
+:104F5000241C921889C2387659220FD2715AF3AEA6
+:104F600050F4714C8F6AF004C3088F2433782431D5
+:104F700014B6F2033F2832BF85D60F8590B71F24A1
+:104F800060276AF0B5B9230D4BC19ECF93104FAD8A
+:104F90007EE379F96FF8BC5EE4696B9A733F02D1E6
+:104FA0001810BF34B61AEDD096EA5A17F0A542424F
+:104FB0002EF0D7B7FAACE389B4D46C77C6A95D0AF2
+:104FC000F9766A9742DAEA7BB20ED69DE3C0C7163D
+:104FD000E7DAC37A2E642349DDFED35BEE214983F1
+:104FE000FF348170BA957CC37767B0C8D0CE315694
+:104FF000447BBED5674B40A8D168F0B773F8B57A4B
+:105000001D62CC2567B15F76068DF09E3DFCB1F642
+:105010005E479F6C05D76785378DAFCCFD4B05523A
+:105020000CED623112D4F3BFDDC1F8542A70C5987B
+:10503000BD9EAEDCC3DAFB6839D8C5BE8802E72F57
+:1050400054E4314ECC0572A0C3CF78DEAED5C1CFCB
+:10505000A3490CFDB582126B003E72154B783E6081
+:105060006EA7A51EDEBEE393EFBC8EF231C685F2BD
+:105070002128547E2CC6795C0C8F75D074B3181E11
+:1050800007A9E3943D6A2527631C4C8E5D9188E255
+:1050900062A12696F0CFE4FDF66AF0AB313CF7CA88
+:1050A00016FEB22CE19F99827FBA6316C2FF39487F
+:1050B000D3C13F8DC3534042FDB06F0706857E09C3
+:1050C000B95CD19FCBF5F07E0B387C84DC8474D343
+:1050D000CA3B391EB29DCFDC2CE7D3939A4F1D9F5C
+:1050E000CFC24CF3F9029F4F8F83AD57AEBA8812EF
+:1050F000A47C959F862ECB79FF5B87E972D319F14B
+:10510000D557B39CC7F2D43C9672BE5A96691E51CD
+:105110000E4FAF9DCC3902F13313F97A43EA0D7487
+:10512000D9AEF19593AD1B84DC6CA0CB3DBC9F6CDC
+:10513000E7B33ACBF96C4FCDE77B9C2E77649A8F1F
+:10514000AE7E13AFDFCCE50AED96ED8EBDCD607F70
+:105150003C2E46DA1DB352E3D17A1DFA7AE3DBBA6C
+:10516000B47A6BE1BBB078B85E371F9FDB450FE1C7
+:105170007EAC0D6C0C6ADF7CB1EDC55AB0C769BB63
+:105180008DD87F84AD9BB4DDDDFAFE67B6DDDBCC68
+:10519000EBDD07F59A2E3DA5F5BF59DFFF764752A7
+:1051A00083631BC25137DCDFFDFA7ACB1D7DCDEC6A
+:1051B0009CB0583EEAD5D935C1ECCE7D1C81687CC7
+:1051C00000FC95C4DF0B7647BB18DB3E00FC408D2E
+:1051D000BC9DF4FB6DCEB020D0F5530EC71E817A76
+:1051E000F9AA53B603DD6A633F82BC6A2311888B38
+:1051F000BCCF7BD776C8AF115DB23304F696824739
+:10520000433D0111E379DA84A80AEBE20931FAACF3
+:1052100003ED1EDA251DE7B60225D12580FF96088D
+:10522000CCEE60706DF05E1D07389C142E880F6EFA
+:1052300033C145C7C37D79E718166F4344522E42E8
+:105240007F764F08FAEB1F732BC21B6F72CAD03EDA
+:105250003EF95684979645303ECF1143783B1C2E3D
+:1052600019E2F1EEF3AEDA0CF1766BD45CAC8F7030
+:10527000C0FC279621FC6E124B2E2D05F5D51BB6D2
+:10528000013C8B258C4B8E0736E2FEB66B315DE41C
+:10529000E8B85DE51B5568777CB107E3EBDCBE5EE3
+:1052A00002F15605974904E280DC815EB433F317BE
+:1052B0007958BE98E038F99F67F1B20E322097D145
+:1052C000B420CEE28EBBCAEBD5A560C754B37854E8
+:1052D000A2865F86F8B63CC2FFECC5FDD0BF63BCBA
+:1052E0009DD84329FA16F40EB7CF8D5AC8CB70BD9E
+:1052F0004496F592D9D5CB8F8BD9D5EBCDB25E2222
+:10530000CB7A4956CF492ECFB58AF718E6FB7912EA
+:10531000DA1F5A7C5B0EB5FC87ED935266B7EBED56
+:1053200015079152F60AF0997D494638D6BCD51436
+:1053300038A0B36F02923F80FB8D0BC8052897A35E
+:10534000B43FD1A8060E38469F2F485852E7271F72
+:10535000ADFE5AB0F79CE9CBBDD3AF08A23E9BF699
+:10536000359E2E616925FD5E016903CF7F8DE7972C
+:1053700034842DC6AB91981E2E27918C747073F8CF
+:105380008FC2993F6D522ED2FA16E7E35AEAABB0BC
+:1053900099EC46A3BE73896A2D9E7394B3F8412796
+:1053A0000823C84D88A07E7190A45C86E78BE19CA1
+:1053B000A56353F2E3088E45F9F93F85762254231D
+:1053C0007D428047339F98F9C267E28B4FCB2757C6
+:1053D0009D253EF1C6ED59C98FB737CB7A892CEBA5
+:1053E00025B3ABE78B0BD9D5EBCDB25E22CB7A4997
+:1053F000566FEDBF48DCDF7A590BF861BC5F74195A
+:10540000F26BBFE831967FC967C8772F34B6F72DA6
+:1054100032B6EF5E646CEFBB8CB57FAAFDAB9782B2
+:105420009F275B39F9DDDF2827E5AECCF5F3178F31
+:1054300022572E15F7936E5121C900AC5F749D124F
+:10544000300D272CECBBE7B9FCBFE0607E9CB8A810
+:10545000E2BEF69F7D9E3F9098DF489BEF68F06A22
+:10546000FAF7F7766E6F99EDAF61BFCEC9D3A76734
+:10547000831E21102C4D64854E8DEA1B0FF1842074
+:1054800054C4539EC0F36973FF5D705EC7FC2EC1A8
+:105490007A1D1CCF3B995FE5E7A5ED413CAF9DBA76
+:1054A0002B08FBF4AE0982A59FE594C4CE05CBA2E0
+:1054B0005EB4333A1417EAC3AE09EC1E5397238146
+:1054C000FEE3AE52637B17B71F4E496CBCAE3B6325
+:1054D00004ECFFB6A9BB1A605C67F25F8942E1FE8B
+:1054E000EE8418C68FB63BD93EC0195609AC0B2EB8
+:1054F00045C5F377333C712D6E882482F5BA79D790
+:105500003B19DFFC9CCE279B79BD2B49585F0E339E
+:10551000FCA5C3D7DE33C4D7B54ED6AF127423BEB5
+:105520008E57135C4F8090F6D9048FC6D9DF20D1F7
+:10553000F387793D060A337E3B8D7945BC2A233FAC
+:1055400099FD30CAB6AF65E4E70EBE9E3BC9D7B140
+:105550005FA7120B83BEF35624C832C42F0993B140
+:105560009CEF14F8BF56D546E5977241682B6575D8
+:10557000EF98CE50D2227E6998FE1592515ECE7081
+:105580003D9BE9A4EB9937B59E1D27DDE884EDB678
+:1055900091EBACF0AEAD674AE0AA8CF3EE6A647EA4
+:1055A0002B42EE207D309F57EC481F5B395137501E
+:1055B0007A392B443CE7704E4A10A0B3AB9C24DDF3
+:1055C00039E9E7F51AE73B259879DC1E8EEF6E4E38
+:1055D000A774F5BAF9B9E76B1D0FB5C0FE2D6F1EA4
+:1055E000938361BE171306FE1C92985FA3CBAD3464
+:1055F000613C4B29F38F8C983787D32C57F134F7C4
+:105600006934B9FDABA4303DE44AA0DF41932F4596
+:10561000F957D4735D139A5DC0D471E541F4131F3B
+:105620002F9708DC8331EB032DD5ECC84B48B70B23
+:10563000EE2BAD7DC51EEAB280D70D44D0F9F5CC76
+:10564000FA7A347D72DFA7D4273FD1E47EA43E41AD
+:10565000FA5CDBD1BA1FE8D3E566FEEBFC3A952C89
+:10566000D5CDB79B8FBFC4C9D7856206479743AED8
+:10567000D1D3298F7EAFD1EBCD34F44947F72B211D
+:105680001870560A0EF3FC763959BD7C18BF627447
+:105690003C8CA403C3438BD39A0F3EABF9343BB38A
+:1056A000E3E36DBCDE368E576D5EA3C989D67F1FDE
+:1056B000C757DE3C93DE175503FDED1ADEEA4CF5C5
+:1056C0005CC67A1A7E4427B357B47562B4FEDF967F
+:1056D000187F98FB4F2787BF19964315FDB2DA381C
+:1056E0004EF21CFA0F8E53BDDC5549F7A3BE418C18
+:1056F0002FA07B7D8C6F82F82FBDDE35EB2F4DFF09
+:10570000A7D347E67DCB68F5A58094D14ED2EC9A1D
+:105710007C7E6FD2C5E381370AD6E73C435C8EA816
+:1057200062CF2AAE0FC244001F2442F8FDBF707F33
+:1057300013CD8F0D494A17F83FC4F9FD3B687ECC65
+:10574000CF9CA42B042E9779FDFD94DFD6865D11A6
+:10575000281FE72A1DBEA7D53B1BFC5ACCEE22F61C
+:105760003B5E877BC063AF1409E0D549E6609CF6D9
+:10577000F13594769523E1192B12323E9FA6DC3F3A
+:1057800080E787B0A5FC8A119F64B12E0F7E6097D9
+:1057900071DDCB76DE6678D2B51B159ED43EF4085B
+:1057A0008CEF2499D7B5339DDFB05D9BE5BCB4FB8E
+:1057B00068DAF7D2213B51E07EFB9080E939435E05
+:1057C0004C4B86DC984E182A200A255AF1501EA60A
+:1057D000E387C6E3F7A2A1424C0B8726621A1C2A74
+:1057E000C5346FE87C4CE5A1A9986EE072983B3413
+:1057F00013F3DAFDB79CA14ACCFB873E8FA96F68F3
+:105800000E2BE7E7A91BEE8C12F0574BB00E51F9A7
+:10581000689BBF1CD725F3BC36B8D83ADCCEEF095D
+:10582000B79BF4761F2F7FCCC5E47E03970B22C66F
+:1058300088DE6F7E3FAFB7A12C8AF677BBB61E1607
+:105840002E37AC87E6FAED69EE273FA395737848CB
+:1058500079FD28F461E7AFCE4014EF0D101245BD7D
+:1058600044C4A841EFB66BF067798F70C3FC6790B2
+:105870008FDD549021B4D0FD856D0D0F83DE5970FE
+:10588000EB7507A8DC7DE88CDEE68271BFB002997B
+:10589000EEFBAB6E0F82DF77C3FC7BF17E1398DFEC
+:1058A00010D7DCB1E08ED8C3C87551B4B369BBBBA7
+:1058B0005CBA73D0CEE5B737ECA2FD29AD36A2E8CD
+:1058C000F8B5E40E0F51F4FAEB644121B42FBE2574
+:1058D000DFF0BD686591A19D764F22784D99A19E1C
+:1058E0003CEF3C43BD9CB9338CEDF839B9AFEA428B
+:1058F000433BA74FC32B3B47A4F437AC1F1D823556
+:105900001D632EA62FD3F1CD152EB6AEA5FACF4C22
+:10591000B774FD677B2F24C51F69E781E710B1F8D5
+:10592000E279604F39E528DE5339F3FA67771ED9FB
+:10593000D633EBAB1CD05705A04F044C7DA0AF0A6B
+:10594000408FB831D5EA9DE97DDB75A06F7C3A7D4B
+:10595000338BCABD053FF8DC99F5CDF9BC7CB29B11
+:10596000E99B759CAFCC7C13E4F5D681BEA9185D8C
+:10597000DF04DD99F54D251FEF1FAD6F3A67DC1B86
+:10598000FD16CDB92FD8D6F0104D3B2A6FC53CD5AA
+:1059900017A29B9677CCBE23F6904E8F9093FFC9AB
+:1059A000F892F3436EB5517F68FDFB43263DA2C9D3
+:1059B000C3DF28D7A738BFA6A3CF914F29D7A7CE3B
+:1059C000925C9F7275CD83F3C56CE57A64FDB33B41
+:1059D0008F6CEBA9B5247909EC4BA678122DE0BFAA
+:1059E000B4F586D8BDBC28C6ED743EEFE07E1EE659
+:1059F000FF9BE10A2F02FE99E18A2C76D3F63797B6
+:105A00002AE3609DA6F92FC2775D3E62CAD79BEA62
+:105A10007FC594BFC254BF415F1E57947170BE18BA
+:105A20003FE4C0F3C1B862ABB3E2A7856EC62F876F
+:105A30005C9128F4776EE2BC7140179A5F86FDB9DD
+:105A4000597F347F8D29BF1CC74FE5AF3395AF30E9
+:105A500095AF34E557E9EB779E9A781FBEBFF14BBF
+:105A600007D969E14F7A95EB898EC9B7479B995C55
+:105A7000DE06ED3BA6DC115B46902F08C06DF79962
+:105A8000F67F94CFF4FC7288F7F3F309B7E2BEA96E
+:105A900083EE9F308E11FC7816F8F9B59BBFC3A535
+:105AA0005C8FF71FE28537A39FA3A3B819E3148E79
+:105AB0002B129ECFC64BADDB7736323F5347B1F545
+:105AC00039C2AF210857678F9049CCFF076270DA5F
+:105AD00006EF0931FDDE56DA8EFA554A5ECFFC1B21
+:105AE0008551F46F3CC8E927F962E8577016C72C56
+:105AF000F7F51DC3F830FA35F769F8E0FB481D3EAD
+:105B0000500E9B3B3F3C00EB6BDC6D2D673F7633CB
+:105B1000397304B31B7FE4FCD9FAB01D2EB558ECE1
+:105B20006BE30E1627AF4E607E00918EA3F72B9885
+:105B3000C71B9EA7699FFD00C753DCCDE2ECB5FEF5
+:105B4000CCF03CC2EB3DE2667E056D5EA2CCC61990
+:105B5000ADFFE7E0B216F80164B31FC2A8E7EEE0BC
+:105B6000F51D0163BD74F8B973183F2C1E4BE3DFBC
+:105B7000D1F85D1BE710C085FB59EB7DB872B21AF6
+:105B8000E3378E137F6F17EC9B45F97588E3B88D6B
+:105B90006E93C0CFDF22AAE85F501522EFC4F34F07
+:105BA00076FE709BFDBC10E83B178FAB20105711A1
+:105BB000D0C525829FF35C8CB37804CAD7A84E1950
+:105BC000DE3719724F6471AB27D7603C4527DDA9DA
+:105BD000C3B827DC250978CFCA9EDB8DF6BCDD5E15
+:105BE00019B38A33153D8C6F2F39B91EF56CBBC2C2
+:105BF000EEDDB48B51577E05B8AA5594D74E257368
+:105C0000FCA2390ED2219BE30F8DF89AE661F48D48
+:105C1000F3F537EE0E35E8E393821E37960FB98D14
+:105C2000F075007C3E802B86F1A4F1629B0DF0762E
+:105C3000B6E0D3C6954A6D11C04B8044315EC515A0
+:105C400014715C9B97E137DDB844113FD0BF1F73DF
+:105C5000B6F039BCFE46193F89C483FCA4CC73D589
+:105C6000EE86FCF3CC2F6F1EE788277A8147E71773
+:105C700016E528FAB7B4FE168E6171DE6231C1FBFB
+:105C80008A1289D495D2F9B714B3771645DF2871F3
+:105C900011C5667F45BA7339763E824554446BFE22
+:105CA000C0C6F5F078013F19C060D15C50E91321FE
+:105CB0005E4011D83B102181C595CFC538F280FBDD
+:105CC000B3EE7709F62B843790D3DE33E8571C40C8
+:105CD0003FD767DEEF28F0BAC936EC1742534F17AB
+:105CE000A4FA05FD8B4EA593A74FC3B9999D687F74
+:105CF000CC0E176DEC5E1529CAC1B8C3B6C0CD2E47
+:105D00003D5D9B3C6586F55592DB6F1272E0DEE7E8
+:105D1000CAF04006BE6C0339023F62F135E181F200
+:105D2000F4F53438453A7D2B7F68BB144D3481BD82
+:105D300058E263F1AA620CCF473A84FC195D553AE8
+:105D4000FE2D96920097BF2AAC423C6347812D04FA
+:105D5000715822E93E8CEF3BD9178732C9AB582CDA
+:105D6000BEAF9FCF568F310EA465147E6FE3FA3A13
+:105D70005DB9430A45ADF4F0131EBE8E79ACCB3F3E
+:105D8000F6D63EE6B15877F6723DD5914755E9E72C
+:105D900018FB001F88C5075F073CB48D5990593F19
+:105DA000C946FDF45FDEF04F609C0C703C67050750
+:105DB00081C714B2B0FBE579188C988A070A30BE07
+:105DC000863820612C9CD2B2BF75550F26C1EE7665
+:105DD0002CF585817EF6F06E02EBA81617640F7B1A
+:105DE000DEB1213DE7B2F8A072E6670DD3FF308E39
+:105DF0006C6EE6B831BB29FF2B339D1B9FC5F72284
+:105E000034F8B53875F3BC9EF2D6BEED9965858F32
+:105E1000ECF6419B28BF10CA2F1BE9FA4E91427A3B
+:105E20001B65CCF7340631DFDDA860DADA588EE97D
+:105E30005A683A07E23F62F152D88F041F0E5E4B58
+:105E4000AB6C029A605CCB8EF9B08FEC1ACE135516
+:105E5000807325B81F4FEDD0BF7A36CEE7E76C3C94
+:105E60006EB67D3E9EA30DE7B7B4815DD8C5E368ED
+:105E7000E5B50FCE87FDE3A609DA3E39ECFAAACEE6
+:105E8000FE9AEC75B073A652AD7D4B1BF4E7167904
+:105E90009EEC996FCC9330C0E376B1FC42EFD3080F
+:105EA0000FAA003ADEE5DE6730BF6932F73B54D413
+:105EB0008F8247E6C768F728CC0EAAC8473F8514EB
+:105EC0000AC1F502B2298FC39D653FB0FFC1F5EE4F
+:105ED00015EBF5322537A3AC6B1C8ED1E84FD18181
+:105EE000F605E86115C67DD58EF270B6C7DDE438DB
+:105EF00033BC48D5832A5CFDDAE7895EE4A5EDFD75
+:105F0000E1BE6429CDE72C4EAA28BE598E5BE8E598
+:105F1000F7C9E87C41FE353C6B76C74D40C731A9D7
+:105F2000FE1C8130BE23E1E6EF09670BEF728F6C38
+:105F3000E8873C5E5B98E9DC654CC4064146C3FAE1
+:105F4000A2A0CEC38335583E2F9C6FC8E7561719C1
+:105F5000EAFB43658672877C9EA1FC6FA5D3D73D83
+:105F6000B281AF23A679CD379567DBAF7B8D5D819D
+:105F7000F7204B45CD1EDD88F7928F038E413FF60B
+:105F800056E23D5D3249BB8740C210AFE256C2C8FF
+:105F90009F1E12C2755A2A36DAA962C068A7061B6C
+:105FA000D4A4D62FC425B8D74838EEF03AE563F12B
+:105FB00020DA3919EED72782AAFBDEA152D6CE32DB
+:105FC0009E414B457E5E8677EF4B473F4F358F13A3
+:105FD000FC4AE63835737DE21395A33AF94BDF4E60
+:105FE000244775EF6AEC00DACF4AE13FBC7B29FA1F
+:105FF0003D9C84DAD114CF2DC12B4894CEB31DAA79
+:1060000050FAC521A57CDE1E9C21631CBEC2E86A35
+:10601000733139F98E5731C473D87D4C4EB47AA39D
+:10602000D1FF363B8959AD67AF7AD93EF9C45DB12E
+:106030003FC1FE527D99E03BAE7D8D43F8CE655564
+:1060400072A11DFC26AF7BC7E27CAA0E84ED97EA05
+:10605000FAA922ECBD6FFA67D7FB5335FF3039E957
+:10606000C2B8E03D491617BC27F9DFFB4F43FE904D
+:106070000DDF15DD7338B37DD5C7ED2BAD5EDF21A8
+:10608000B65FED1389373F939DC3EFBF55264D7122
+:106090008722B103FD4FDCA9D8C1DEE96B7409B0DA
+:1060A000EECFE0F3AC4A86EDB09E8E36AF7D26FA99
+:1060B0006AF384FB8730CF561FBB0FD82AD3F9224F
+:1060C0005FB3F7B2D3C13BBCEF97ADF121F9D9BBB8
+:1060D0001792232A5BCD7BB47B8A1A7CED009F004C
+:1060E0002983AB3DC0E8D01ECC4C87160E9F56AF1F
+:1060F00035C0E8D04AED836CE0117D4678A88D2745
+:10610000805DE823893A7CD34C252FC33E08558512
+:106110000278D897BC1FE0857B1760CFE75509D779
+:10612000C2BD8F28B30FFD55C9E4DE009A2711B810
+:10613000975130D09F7C9B961F6CF0E2634FF2B575
+:106140004792D08F280FA2FC74C160681F4D6C0766
+:106150007BA70DFE4955FAB8EEE002B03F44C2F409
+:10616000029538451CCBED130B79D79DEF0BA79DFE
+:10617000A976E9F066B63B9DA43EB3BEE2E7FD2AF0
+:10618000FD0FF48D6CBA1F61B673CD71F017813EAF
+:106190001F93C53D8C4F394E2E79D005EF21D8CBBA
+:1061A0006D32BCC34C557A1EDCFFF1864502718D01
+:1061B000B9BE017C3A6B34BC53FD57C7E246FB883D
+:1061C000FE1E69BD8FF98102F55582C0EE1128F0DF
+:1061D000EE66A0FE50C88A4F35FE1CCEFB9E44FDE5
+:1061E000D8461271883B51EB6CB8AE759597E5E9CE
+:1061F000F74737F904BE0FD5E84F1471768AFE745D
+:106200007E61F7F4BF1FFDF3171BF17EA674B9D3AF
+:10621000C7F4D268F4FFB4E368741B291F4D9C6E69
+:106220009B50FF754ECA4EAFA4E8F620CAABB79C90
+:10623000841316ED9A39BDCCF7F65D2446E0F728B5
+:10624000ECAF307BDA3E6E76C30E92812E23E2AC49
+:10625000583F761FF3A7AD133C21186A5D1AFFF271
+:1062600024BFC0F5FF008BE79B733008E7C7DDB3A1
+:106270008E06E19CA3E713EB73C8857E7E2E127E0B
+:1062800003F7013DB3985F10FE40EFDCC6FE49CA3C
+:10629000D4F736C33B66EBDEF21AECA1F6C6CCFEB1
+:1062A00006A9E8BA28D81927DE1114586F84A23538
+:1062B000E7025CFD7396E3BB23ED55FBF01CA63BA8
+:1062C00094992E5A9C6FBB29DE36DDB9E1092EAFB9
+:1062D00065EA0D685FF614BE8CE3ACABCA3C0EBC3D
+:1062E0009795299ED7652351F4179BCE75DFE4E37C
+:1062F000BDE9E3E7138EC8972696C2EF72A8E81FA0
+:106300001B5B1EE9B751BCD5FBA3AFF9285D7BE64B
+:10631000DC5A0870C03B317ABA07A07F0BF8C6FA86
+:106320006D06BBE94459ECBFEEAC82DFA79882EF63
+:10633000D66BF5BAD3C4B19FA7D15971E3BEA71DDF
+:10634000E2FE297CDD85D9E15FA3F325E405D7448E
+:10635000680F71BE19F8D9BCDE8F8677331E7A1CA0
+:10636000031807D52358CF67A19FC95DCF9D4976F4
+:10637000AE36E7289EABF9926F60FCC477671DC606
+:1063800073B5123FA387DF378071A539D5EC3DC0C7
+:106390007472F400A79F281BEB1171C070EEB3DD7F
+:1063A000C7CFCB0299FBD3E024AE0176DE33522E69
+:1063B00071FDD9D9FDF0417C378524F15CA1FD55F3
+:1063C0003BDC4D1DC6C308B98AB3DF85E9818DC7A3
+:1063D0008530CE5DEDE027E9D1CED92AD9BE49ACD2
+:1063E0004AE2399BCBAF18E3AF43DABB88D9CDD3B0
+:1063F000076B11F30F8BB0AE823F1EE06BADBC029A
+:10640000FD69E9E8FA1D6F74A67F8CDEAFCFF65DFB
+:10641000FF6C7C78C2A718EC43333F3AC937CE688B
+:106420005F97CEBF7C82CB67002AEAF649DFF44B48
+:10643000D6F87DFBCAD1F0FB4D6BFC5EE501784FD1
+:10644000DC63FDFB445ABAC5A4EFB668F128F0231B
+:106450002185D85FE9E516F3D6D6D5137EEDFD9EEE
+:10646000A807D68D3275AE07C6DFD5BDCC03E3EEE7
+:10647000DA9C999EDAF8DBF9F96282DF77D1CA13E8
+:106480009C2F7798F4FC2B5CAEEFE7F2B5CB15F1BF
+:10649000E0EF55ECBF6AD1548ABF32CA17E05254BC
+:1064A0003A497EA6F14B55D3BEE40CEFB5F4F84D56
+:1064B000F1BD59DED3FCB478D901FC7321E0E1DFF2
+:1064C00051EEEDC95C94A7B2958C6FCAAE194CC25F
+:1064D000BE76E2265B42C1389628E2A570A5A86088
+:1064E0004C1BBFF77A2E5FDF89FD0E5B0994C3BD9D
+:1064F0007119DC2EF2D7301E669BF1F73F76B9C2D8
+:10650000CD12D8BF718C742465DDC6DFCB184F74F3
+:10651000BF5741C72D7CEB3DFCFD9442D3EF827CFD
+:106520005ABCEFFD07E13D21128F5E1F2B028958F7
+:10653000E9FDFFE47CA9341D60EF18C47CE45DDD57
+:106540003907A55F3ED805DBD58D35804F354E42E6
+:10655000932DF4D86FFD5EED777C0EC03B0B8E6201
+:1065600076FFAC6DE915037BA9CADA7E472DB13AF7
+:106570005FA17AE1B77E5C9F985E48A8F52C3D69E3
+:10658000473E99DC4D12F03B28F336C5FA1D20EA50
+:106590002BD93BD48571559068BE8C9AAFB47B32B1
+:1065A000F13AC2EA2F218930F211792D3836F57B84
+:1065B00027250337F5C3BEF820DD17C3EFA868BF52
+:1065C00057A2F1CBF898913F26C78DF971267E31FD
+:1065D000B72F53C822187F52B78DC0BE6E4C83AE02
+:1065E0003EF44706DF7B848E3FF9003CCC48D3DE87
+:1065F000CCFD8B24EAC8A1F87CFA2EDF2FCBE9046E
+:106600001FEAAE2D00BCEC721176EF22E2C27717C2
+:1066100048C4FA3C6904DF6A767F9AFA297DC9EAA0
+:1066200069EB5EC75B027BE7A2447EA714FC9CAFCC
+:10663000B1DFAD4BBD5B7121BE5B112431663F9272
+:1066400008A6AD9C3FE54B8B4BC11F1A7FDB2BC3CC
+:10665000FD2CB9C0E84F13F3EBF03DB061BB3B9F9D
+:10666000DADDB43C9E67D4A33539CC6E0DE5B07B42
+:10667000A1B297F5435C6AA15EEF6FCA118CE53E4B
+:10668000B5F0CBBAF25ADE3ECEDF2DBF24675107FC
+:10669000D833F2785ADF823FE7F171B57212081DE4
+:1066A00086F73F367FA37E967E3DDF94C3CE77E4A8
+:1066B00073F8B8C5D670C54BD9B877F37137E518FC
+:1066C000DF8D23324BB5EFF7FA6F158E507C9F703C
+:1066D000905A88576919634BC0BB69B78DD5E2C220
+:1066E00032EB098D0EC3F896593C52D175F20CBBB2
+:1066F000851C6BE9D63AE6A7327FBF9ACFA3F5BADD
+:10670000DADE4914AEF0012677CE00B13C07A2F2E2
+:106710007D75CE2C8B75BFB50EF77127F232AFFBAE
+:10672000E67DAEC8FD8BE67A4D9C4ECA2B417C8A35
+:10673000BB35C8FC895AFF270A995FD1DCAED3D498
+:10674000BF9BD48721CE18CE57E15C559A4412499D
+:10675000DA8F27D02B972A101F705885FD91422879
+:106760001EC1CF162268D7B506D97E540CF6D6D8EE
+:10677000209E84D4C97A3BAC88FFAEA29677F8A25B
+:106780004D39680F8505C48BC8CEF34F38120B0105
+:106790009F2DA53662F54E7F770EB373B72AF52F7E
+:1067A000965AD06F438E62B09F8B8698FD9DAE7EC9
+:1067B000AA1E836F981F832ADE3F200AE3C77A7FD1
+:1067C000F89E1CABF35B4DAF703FE4B26AAE7089CC
+:1067D00072E5AFE93CAE3FE4C0D8F44B4E6E3F08E3
+:1067E000FAD74EF56F17FE8E5CEF41F0435E03F76C
+:1067F0009F68FEFAB7A64925B4FCB5223B7F743EDC
+:106800009203E37E486CE82FF990BC9C335347BF5A
+:10681000A77224B6DEC41DA847357FDCB5BD0E8344
+:106820005EFDF666637E39A91F0B7E8AE59B1C24FC
+:1068300041F17BBD49EF3E94C3CE89BE4D62EDB0C0
+:106840007EB6F1F3BF1B7F324D02B9B97EA65C6AFA
+:10685000D7DDBB7A2E87D977EF533E527472B6C21A
+:106860009790601FF7EE9E99577C9E403F89F622D5
+:10687000F0A7E559C7017E2B6E8473B47998E1D6F1
+:10688000CEF3D2C121EE162CFD42CFE708067F7C65
+:106890008B8BBD87146E1189FB6288C3A3020B70BA
+:1068A000BFE5C7F7BBD5DA18C6D5A9CD4EB9258047
+:1068B0007176184FB786120CDE1F3ACAF94F8BABB0
+:1068C000A306C505B04FBBD13520815F79B518ABA4
+:1068D000839F4ED3CE659C8E68783C85DFF16C4DEE
+:1068E000723C31D48B6759EF90509655BD3A5B8618
+:1068F000FE8E713DF98BC71F9260FDF9F0B177BE36
+:10690000087278C373760257F38E3DEE2749DC3F59
+:10691000242490F3157BEC96EF48508C61FF37FCF4
+:10692000C88F7A71C593CEC462DA7EC533EF4E2725
+:10693000549E8E350F1E1C0FF87B4C60E785EAC015
+:1069400074589F5688E49B56EF8EB97399BC7FF0BC
+:10695000536F03D04FD8DD7F35F6DB77A543FF2E8D
+:106960003EC965EB0FADC7E2261F1512932DF487C4
+:10697000B61FFAE0511657B2E2594702428257EC6D
+:10698000DE2145291CAB777F84FC72E98F9EC8010C
+:106990003CAC7ED66EB0236EF8D127ED17523ADFAD
+:1069A0006027838B418EED27317F3CEC1AB4A35CCA
+:1069B000B3F89455A80268BDA77EBFE0D7B4FCFD2C
+:1069C000A09D4088EBFB877F273D07F9A88F5A6E73
+:1069D000D0BF91AF57EF7E57C2DF31B291C1E2CF46
+:1069E000C3F987D14E32D7276450023DB5BAAFF311
+:1069F000233BE5B7D57B3E7C13F86EB5493EDE8779
+:106A00007F148EB4CF2B734DF6F9EE82ACECA31B42
+:106A10009E38FE00F8233E78F28F0FC03DDA95A72E
+:106A20003E7EE07B1017F66F6E19E47BF563AFE6F0
+:106A3000109DFEBF2C97AD9BC71E7D64D7563AFFB5
+:106A4000636F38115BC7F6FEBE04FC3FC77EFCD700
+:106A5000B1E00FBA65EF7CFCDD9A5B9EBE745CA66C
+:106A60007511F835A1FF7D457E6EA43C2B80314920
+:106A7000C8CF786AA207E91D94605DFB8B4006BB16
+:106A8000F2E8F7BE4F24B0CF0E86C920E067FF9E24
+:106A9000770FDE4EF31F52FA382DE843E73FDE86CC
+:106AA000FA998A0D4D57EDF9F2972EAA82D4817684
+:106AB000F86A32887A73045D5FA174AD4AD1D55CFF
+:106AC0007E9C9C94E0DC60F5E3948ED3819E948E52
+:106AD000D347D2F143F8C79C91745C916B8C4B3ACD
+:106AE0004E566EDF0A857B0A2CCF79B57DD68D4F49
+:106AF0007F35A3FDA4E985D1F07C9DC0E09A9D1B64
+:106B0000BE3D17E4EBC91FECDA1A60745E4C1173DA
+:106B1000EC89E32584F2C91F1C8357031E06F73A4C
+:106B20006558DF57ECFD15CADBB1A75F92148C6F77
+:106B30002139C26C9A27C37F2F139A5F25B0CC8D61
+:106B40000FFFBF056FD2F637C2431E32D20FF307D5
+:106B5000A9FC213D1297D729A077136370DEAB12F1
+:106B60004C2E5625FABF02717D66BC3F956BD3F45F
+:106B7000FF305D216E6CD59E771600FFA5A3A7366A
+:106B80007F19E67F012D7FD828B769E594D3F7D820
+:106B90008E1312D807C9E724D946EDE1638E410967
+:106BA000D7C71FDBE59DA191744FE19FC71F9DE1F2
+:106BB0003EFC876639E7F8194DCE479FD799E16DBE
+:106BC0005BAEC2F65726FC7D70D25AFF3FCFF5C6AA
+:106BD0002A12AB2B9A3872FD1249441D5F9A82F734
+:106BE00003881FA3F07EF0981DF787ED7DFB518F82
+:106BF0009BF5C5AA3476F49BB9CC1E58F56CFF748E
+:106C0000D06B1FECFB29F2E5AAC7DF91C07F737040
+:106C1000F753D240454A0E607DD0FF0ECE073FECC1
+:106C20009F0EFA6B759A38C0DFF3F9ACFE99B1FF8D
+:106C3000D58F7F64E8FF06B54F423FD928E3BC2FCC
+:106C400086AF84F9BE7FD8012718E4FD3E7B9D9571
+:106C50009DF3025F1F353CB5FB67BF9E0BE75EF9F6
+:106C6000EC1DC6D6A6F0AFF0F77B5F72F0FD6DF8B5
+:106C700075B0675AF224BC8FD0EABF02FDF55A7F87
+:106C8000BD267CCA01B906F603F2BC48957E5FA515
+:106C9000C19F17B619E0BFC55F374EF1B1FD9942EC
+:106CA000F71FFF03B64D466E008000000000000095
+:106CB0001F8B080000000000000BD57C0B7C54D516
+:106CC000B5F73A73CE3CC24C2627AFC9D37892F0C1
+:106CD00094804312DEB40E0491226A505AA9F5AB97
+:106CE00003F28821C9A4F8E25ABFCB8444F4029F7E
+:106CF0008D95166A693B70A152217690A0B10DDC8A
+:106D0000012C06056F105F78B18D5A152B24631482
+:106D1000B4575BEF5A6B9FC3CC9C4C84DEFBFBBE2D
+:106D2000DFEF0BBF76BBCFD9679FB5D7FAAFD7DE02
+:106D3000EB0C28DEDCEA5400D93D6B366461AB5ABB
+:106D4000D41409E02BFABB2AD6028400C603585D8E
+:106D5000D5E07761AB5A407300FF7D45FFA7785BB4
+:106D60007BF0F97BE5D4D6B5348FB5F157D48726BF
+:106D700005B657F2B0914A25DDBFC2BBB61860A375
+:106D8000F39F1FA7FB2B8376D58E6D73EA3DBFA5BE
+:106D9000FE0609AA65EAD3F3383E6875A8DB55BC40
+:106DA0009E0E0BC265317AF25424321BA00CE9A06E
+:106DB00016FFFC3001DF2B488266A8031C0129590D
+:106DC000A120B5C6730FAAFE62757CAC2FBBBAC1F9
+:106DD0008FF35E2DBB2CB4FE07732D217B31B537AD
+:106DE000A641D9403E18ED03ABAA213262F0FBADBB
+:106DF000D98E855B80E90E5A681D9223B49D08F1F7
+:106E000081A67A8069030DFF873C74C4D18D037C11
+:106E1000B40E45BF6FC565D14D3B04B94D213960F6
+:106E2000EB84084029D2AD96B05C52A1479F240A5A
+:106E3000D563006E4CF57F93D6993BB451A2EB1EFF
+:106E4000A8E6B612FC12DDB738EBF2FC5FB33E5891
+:106E5000A09CE919A9CB175FB1C12AF8AF28A00CF3
+:106E600029273A36ABEF8FC679E87E268D0AB21C09
+:106E7000C6557D67740BC181888FE3F32333676444
+:106E8000126E8C71CD8EA29312F2DB27A7A8294532
+:106E9000D8579033C4A753A9CCA71F4DC399F1FE6F
+:106EA0008F4FA56E95511E8F48024F41C213E10AC4
+:106EB0001A1F277CB8113F6BE9B9198DBF65BC5803
+:106EC000A0BAB952E7A487F827FE106F8CA7958A5D
+:106ED00043B57B89B73E4DA1796C105A2B11BD7E0D
+:106EE000E6A7035AB91D02616E5DD0CDED5DC4E722
+:106EF0006C928397FB69D0D33A149F9BA356D7AA71
+:106F000078FDC7B333245A9F0B549DBF8579D41F96
+:106F100094BF3391BF8E187FEDC44FE7407E3A4057
+:106F2000653EA47BC1BB761CCF0B115CC723D3216C
+:106F30002433885450112F39FA3A33C127117D84F4
+:106F40001F5A5FF602B13EF3FB72A195C7E5439865
+:106F5000DB42E8E636C3A14A0AD3734A97EF3BF017
+:106F60009533468FD1DA09C138FFB9429CBF98B931
+:106F7000ED963CB47EE3AF9A71F887CA83BE2A1CB3
+:106F8000A7F85D3E3B2EE5FF54CE201082F572053A
+:106F900048AEAE9E8573C18DC3BD36888CA4D9839F
+:106FA0004C5FCA48D137EC8B1D051531E8C7E7ACFB
+:106FB000A73E3C45CF59216E1CD121DF9A467C7FEC
+:106FC000982E4C1EC8F795A79AB29E8B9B77AB9ACA
+:106FD0009A45EB848930F12B39F63C4CCA40233377
+:106FE000F0F9CF5605B39EB3C6F8D0E2F867C6A550
+:106FF0000F019CF24DEC138EB36238465CB29D0BD0
+:10700000AEB6ABCD598C43C6E94A64901DDBCF5276
+:107010008A42BC7E689C7823DA618BC3274978BD9D
+:107020004E7587883FF5AEF02CB61326BB317DBE7A
+:107030001AC9C7717D8DE025BE6EDC73C369E26B32
+:107040009F07347BBAC0856F02D909C38E8026A3FF
+:107050007CD748E31C12B6F5ED1FBFF47B1C9FD212
+:1070600029838CF7FB70CDDDB46EC5974E4274C298
+:10707000FA04FD6E7608FD31D669D6D77F749D2857
+:10708000799E9FE52093FD5DFF2FF47C3FA4B6D24F
+:10709000F84D0ABE9AE6EFB286B6231F561C911928
+:1070A0006F2BDAA410909C152D8DFAF7BE2883C0A3
+:1070B0001FF0FD7B7F55CA789461F48FA6E1F381C0
+:1070C000CD562F5A4C48F725FAABCCD943408BC349
+:1070D00001047D2FE722BF16EBFCDAE87C780BD1A8
+:1070E000B3A949F8A7ECEA8C84F19FA55C6F5B8A91
+:1070F000F36B7948D714C24DE7F035D85F5E20AB0B
+:10710000329A889C05F989FEB1D5FA0EE99F86FF6F
+:1071100008DF86FD5A4AF68BEC907C3FFBBF73205C
+:10712000FC9F02C2FF35A0BD8AE07CCB3689E78D8B
+:10713000F96A3A1F595380ED1DA1C4EBCB4189F583
+:10714000D9CFBA47921D580943BC766920FE2DE974
+:10715000887F02890B5C420E2E2FD997FE5764AFB1
+:107160005DB082F595F84E7644EE19B1711ACE17DE
+:10717000E8B24248237989FBFD9BE550B038A61F51
+:10718000FD5D7B981FCBF2901F884F7B6E22FF53D3
+:10719000B444FE3B47667CAD3C52BD267ECA739923
+:1071A000FFC86FA0F9D32695243EAFF37B24FE13CE
+:1071B000FCF6319D4B3B24784C223EAF3F5CA00D4A
+:1071C000E46B43C72336D2FF8BF1D5CCC7D1E9BAE4
+:1071D0001DD1F9780E3A0FE8A8AC7678D894F03A39
+:1071E00014B5753AE1B410F5967062D66B837FD60C
+:1071F0002CD567C37197D1385C5FBE232C94D10B1B
+:10720000CA09C2CB2261779B551FFB23C3DE3A2FED
+:10721000D8ED77E12B6CB3E6553E4438BA534A6D4E
+:10722000952B07EAEDBA31F7B0FD2A5C8DF698FD93
+:107230006A629C165EE5F02E467A9E5C05DEC5C34A
+:10724000009E5AA5726B8EDF0C7DDF8CF19B5DF882
+:10725000679E5741FCAE55C9FE7855A2F3611BB03D
+:107260009EF69541682BBE3F1CF9D4A391BD2E8F8D
+:107270005E5F8DF145600954539CF1AF1922AE7BDE
+:10728000466F6765D8B85D5B6D011FBEA7B7530E2B
+:1072900049485FAFEA3B7215D99D4EABC6F1951ACE
+:1072A0007DE97B7CBF425D8BFCCCB3B48EA3F7E25F
+:1072B000F8D9219CB7AFF35DF7ED717EB9B7E3D193
+:1072C000511407FDCC0235E124F1D0F2740BC73123
+:1072D000BD23DFF1E0B2A1DE11B501E2E9C19EC636
+:1072E0006A8AA7EE746A4C97AD7D7AA480F1338FD9
+:1072F000E3E3E7960E61BCED3D0321D2BB59F2AD4D
+:10730000D78EC1FEE45715AF9D95CA77FDC2093CE3
+:1073100084E5BEE1CB8A4DC4BF00F273355F6C3D9E
+:1073200041F27AF6CF0A90DE55363EFDAE1FD77990
+:107330003817D1300960822F5C11C151333BD3A77C
+:10734000937E074E01EBEBF86E2501B720D71D2A7F
+:1073500020BBF286080F27BE61BA0F4199E2FFC930
+:107360003D89D7A75E04EFFF62D80D377808EF8F0D
+:10737000ADEA8077C92FEAFE331F17988C9F06BEAF
+:10738000F738673C922EE2769970EB55928F7F2703
+:1073900043C4F91BBE9425C2655F14BCAB915F7DED
+:1073A0008BF379DD7D9F524086ED97F2EC709278F9
+:1073B000EBD7E93696DFCF6C02F73F5BEA0A35E19F
+:1073C0007A0E2EADBDBC07DF77FE9FFC97AB5F1733
+:1073D00007A369B14C6279A511DFEF9CD722B11EDA
+:1073E000426B1EF1CD3CDED013436F0C7DC95B3A7E
+:1073F000C41F4AF29EE1B43EA46FC6D291928D7032
+:10740000BB5F029263EF6AA4EB6BE2C720AC2E2055
+:107410007A021D9FD8C85F3B3A255F28C9F8C3E9A7
+:107420006EE65FEFEA60D354E4D73D8BF059D20BA0
+:107430005B6B71B2F983B0A1008343684BD704EE54
+:107440001D701BE92528AD79E4B77B3BAABE4576C4
+:10745000FD31D4438A1B7E66F532DDC17A80EDC4EE
+:10746000160A3CB15F783D6C591B974776A74F3F92
+:10747000958EF39D4A5779DE4CBF5722BABD7FFBEC
+:10748000CC4DF3F77D6E67F9E5930EC7C56D9FA6EA
+:107490000BFEACC9F0BDC678A9C96263EAF5BBBDF5
+:1074A0008B2B00AEEC407EC7E13226B720AF3BC34A
+:1074B0001F647A32BA3171E2FCCBA751BC1CD08D6B
+:1074C0003344245026C4EC73A5A3305220F28770B5
+:1074D0000EF237A3E6C76CAF53D00E53280EDD89EA
+:1074E00079115B647C9E749FEC42B32AE2AC967483
+:1074F00061E75A1E5142CDF8DECD4A4FCA306C8B3F
+:107500007DDA0C45237B5FC6F3E6DE05ACDF16476C
+:1075100048223BE42CFD45FA85B86B2AC0EEBFC972
+:10752000CC7FB39C46EB7AB126C3FF05F1756C574F
+:10753000F420856FDE14C824B9CE925DBCEEC96715
+:1075400085FD31DB1B39F2AB9F91BDE9D3F3A72455
+:10755000F6E676F2AF86BD01B9EC10E167EA8B7A08
+:107560009AA9DB19CC3E980F138FFA9B5D49ECCB9F
+:1075700024A84E43165FD4BE98E588C1FE857E21BF
+:1075800032A3A20BF528EE79B33D2AC8D0FDAF6E29
+:107590008FCEC1B49CABB5185ECA577A0FD9E3F051
+:1075A00061D8A1185E428C33F37B24705CE8ABA5F4
+:1075B000643F8ECA696477A6A3DC71FE2E5D4FD24C
+:1075C0003F0D7D8BE4BFA1F39A14C2F5535D550EB8
+:1075D000529B15B9B2F6678C9F9503F383A0C385C0
+:1075E000EC9DF15E2B3834D748E28785F920ABD883
+:1075F0008F7B7F7FAB349BEC220A2D6DFE98C1ED13
+:10760000C18A5C1BBFE7A9AE9234C2910B30BF4563
+:10761000F955764A1C2798716DC67133BEC0C27980
+:107620006335C713B214D6F71D12F3D2E2E064F645
+:107630005377611E4E716B7F17FA2D6C9F423F4F3F
+:10764000714AB36B16AFDB58AF41DF5DA93372A04F
+:107650006CE0FA8D36F0B90CA1CCB8BE12B5118E23
+:10766000039FDB12AE1BFC1C8C0F063FA7103FA52F
+:10767000FF3E3FA76608B99AF9FA3F5D7FE18A4964
+:10768000906C5FE0FF97F54F05FFEF7B44BEF55A26
+:10769000AE27664F0A57CC9697211F26503CEE8D99
+:1076A000D90707FE237C8DED68657B3309ED0DC599
+:1076B00099057561B62F137345BE64B61B5776C224
+:1076C0004D641F2747302EBD04FBF129FD471EEFF7
+:1076D000E3FC3203E91EF7FC82E5BBF0D2580D3221
+:1076E000E7E27BC6762B5EF27BD09D99745FC0EC9F
+:1076F000378CB8D48847CDE38C78D4F0270D3A1F67
+:10770000FE3DC3FF64065D57D520E91BEA55F831FD
+:107710002FC35EA378A13BBD7A37DF1F190E721EFF
+:1077200050022AEDEBA0BE721C56E97045E4B1038D
+:10773000F5D369D2C330F285F609822E4B689834AE
+:10774000900E0CB78314F7E103FCFEA5BABF28C462
+:10775000312CB406E0F8BF702CF8C9EF1696638B95
+:10776000EB3CA6C7232F995AA4FB79E2AB5581A025
+:10777000BDFC1FA797482C2827FEF8FE40EB77CCCE
+:10778000F631FD052A78298E2F50C29217DF9F51BE
+:10779000A7491736910C3F8DF315CCD5D85F160C41
+:1077A000C53E8DA77827895C7A32ACBCCE7A47CFAC
+:1077B000611BF22130B771B6DB128BD3ED56BFAF30
+:1077C00080F68F3A44BC0EB4DF379EED9244EB5105
+:1077D0006608FE0454915FB94065BB59A9CBB1D28C
+:1077E0003197F777C827DA270F5CB7A4F97870FECE
+:1077F0007CD082936376D5C87F701AA0F798ED6A23
+:10780000DFBED72F0BA23EBEF5BF3F4905BCFF2709
+:10781000259A4AFC387DFF89541FF2E3ADFB45FEF3
+:10782000F27D537CA4640AB92ECEACFE82F87ADBDA
+:10783000AABF4D88B72FB0329BF5E28E904CC9F0AD
+:1078400005FD59BEC3C97BCF46BF3E9C99D037F4D6
+:10785000A0DE0E8DC9E2EA6999222FBA63D7161B02
+:10786000E5D18B33FDA999D83FADC77FA7DB53790D
+:107870003FC0A067D1AE7136E2F79F3AED106103C9
+:10788000D96D1572F65D2F4DA0CD7BF167A6F3F093
+:10789000FE021BED9F2F91202AF6B5E0F0CFB1FF3D
+:1078A0005EAE0C6BBD03D7B1E42DD56641F92C99C2
+:1078B0000ED120EAD5A2BBA435F7E2F8457E1745E4
+:1078C0007003D6B9309898E72FD3E395DB1FB29AAF
+:1078D000F2A4C6C3B45FB618E7A17C76496BE2FD9B
+:1078E000FEAE3B0FFF9CFC40878DFDC0B28BE44F8A
+:1078F000E332F57865024CFCAA94E295B21F9569D3
+:1079000083DB25235E39BD0A083CF097550E6ECF08
+:10791000AC52B9FD42B7D7CB3B0E1C665C2BDD13D6
+:10792000C8CF3ED5F5AEF3162DE637BEB9E5934385
+:107930003FC77E05ADB398EC65C44A78BC4AF71BD7
+:10794000CBF438A4E273B3DF38F087DF539E8DEBBE
+:10795000DFCE19D7A5C523B782F2693C1F0C3F6261
+:10796000E6477F57A99370323F33713FF67FCA973E
+:10797000C19EAB9711D749EC87A14F5F64087C2F5C
+:10798000DE366F4D3EBEBF79DF07453DC22EBD06D8
+:107990009E185ED1D033DE960144D7223EFD9DFF76
+:1079A0007498F87498F03689FA97F1FDDC2AC42FA0
+:1079B000EAEDB2CE0FDF84B1AC5FB9965C6A23B951
+:1079C000945F9A7168C69F196FBDD69E22B20F66EA
+:1079D0009CF54A89E76446BB34539C5F2CD67CB344
+:1079E00028DF45B7B646E5F508FB775A693DFC4305
+:1079F000D2DB6D12E787F5CFB43D4DF6A8F6B73F61
+:107A000071933DFA5069F5D0FBEAB63FE0F6915D1F
+:107A100052826E7AFEC390B04BE6F775EA7C34CEA4
+:107A2000052EF8A587A26BEE437E9C477D26FD6D53
+:107A300068FFEB9AFB28CFF039A294779E567A66BE
+:107A4000111D772C7435367929BF4D5C77EDE33FF6
+:107A5000F168BC7F1C2CD0F9C7F96AC336AB3782FA
+:107A6000F336BC227BE9350188F2FACCCF07C2EFAE
+:107A7000DAC87EAB1688164E1D781FC56823BD096F
+:107A8000B4AFFB5876532BE415203EC79D33D4E8A2
+:107A900076D88CE35D99FABE888E5FE40FEFA70677
+:107AA000912EDA3F8290B0C7CDBFD938F66DA4EFE2
+:107AB000CCB617DD5259FCB9C26A96477FF8F65F1B
+:107AC000392C83E3B757C77B2C6E09F1735A87248F
+:107AD0000E833A455B678DB8296FABDB62F506F123
+:107AE000725D9B0C0EF25F27ED1C37D4B57DC2F89A
+:107AF000AC937C51691C2FC32DC5C511CBDBDE9B1C
+:107B000045F676799E0C7351A56AF79C13E37D10B8
+:107B10004DC1F1CB77BF3DEB87D447BC3B92C8AB9F
+:107B20002A7CC026F4C624AFF0DBB3281E6EFECD3F
+:107B3000672C8F0FF74B90533CF0F99A2DEFD9C873
+:107B40009F9C41C164A60B7E91DF0884E585B6B495
+:107B500064F28B5CFFBB4ABECFFB7F1793E37A3A9C
+:107B60006B1BCF787FF2774847CD9B76EF5C7AEF3F
+:107B70009377BA0171F081D22870FF8B073CE487BC
+:107B80006BAC418FCAADB85EF3CBBB198FCB8EDF28
+:107B9000ED11F98D2F4FEC1705F3689D4B367F9B48
+:107BA000D7B914FC8CC79A5FC8D5B44F734E81D92E
+:107BB000BB93E84D659688B7ECF083B1F789F30085
+:107BC000A0FCFC037DDF34F8B2CC719B1D6E4C9B96
+:107BD00017B7FF64CF12F62A08A13FD2B96A00DDB9
+:107BE0002B9F831C3F378BE6B9AB5869A473225C8B
+:107BF0007F50E797F415EF0B80A6C4C55955C7AF62
+:107C0000CEA17D313BF4DBFE5725C7D51AC53D71AA
+:107C1000CF31DF3ED86A1F225D89AD27F9BEE9ED7D
+:107C20005986FEC3CB1087A7C08E0F184F80FE3B2E
+:107C30002D57F41F237D5CE46A4C43BE7DFACABB1A
+:107C4000363AD70AE27A8611BDDDEF711FBCD91A28
+:107C50008D37E60F74D863E781A4D7DBDE33E9758F
+:107C6000E27DF4DFCCCF00A46994B77D608BCE2297
+:107C70007F1EC4F7527DC1D20DF684F3C6185E4C48
+:107C8000E78BBA7E1AFB9CCB4CF198D19AEDC2954A
+:107C9000598976013667273D5F34E72175D6D0AF25
+:107CA000893F7527ED9CBFD4B509FDC3803A3A0CD6
+:107CB000F5E1A35D875EBB05D7F151D89A3597DF13
+:107CC00096686F6B9E42FDC5F132F23B85EDED6724
+:107CD0001C4F19FEE823175E1C93446FF17A52BDC6
+:107CE0007501DBB3FF577676D92076F6BB5903E2F0
+:107CF00084347C0DFCE589E597537C61E6AF615FD8
+:107D0000CD76F3934C2DA9DD04DDCF1B7CACDD7962
+:107D100096717B3E4F9C37356CFB2BFB31646BD4EB
+:107D20008EB86D087DCCFD07C88F71FFC07C696C73
+:107D3000B27527F2D37CFF32922DE723D1EF139F48
+:107D4000658BDB2BF6E7543ECF6F26BF49765A533F
+:107D500081E40833204C7187D4F9FC5FE97DE6BCEF
+:107D60002238034636F2B92EAC8BAFCF092B7A3DC1
+:107D70004530797D4EB32D769E4BF7073BCF7D5F27
+:107D8000B7575E97CAE508D62C4D4E5657E2ADB2AE
+:107D900024CD237E9225CE774AB3C5BA8F65097963
+:107DA000B4C8D5FA46A3C897680F95ED5FBA9BCFC4
+:107DB00083AD7A7D06CE9CCBE7074ECB27C812D881
+:107DC000BDA17A8E42FBC315963B4BB1DFB5E1F600
+:107DD000390AE2C73BD5B2A704FB2F6C582CFA57DF
+:107DE0005A2AAC08FDC7834BE6CCA47D03CBDB3F0E
+:107DF000A5F529AB15A0FA91D296F7B87F97559CB7
+:107E00005F353CBBB786DEDF20A12090FF2DEE70F2
+:107E100023D731E482BA9A368FB53D7EBABF260F9A
+:107E2000F379944724CDFFDB2CF22B8E885B2BA1BA
+:107E3000BCD2B7F17B785F79D94A3921AE53EC8354
+:107E40008FDE333597ECEEFF85F7FF5B56F6E0EFFC
+:107E50003FF3D4B50B68FC68195419E72B57B42AC3
+:107E6000EADB31BFA6BCCD9043B922F85EE6B27121
+:107E70003ED792EECB253C1D239C665F7ADBACD7C8
+:107E80000FC94E810339CDD2B81BDB5774F9BFAA95
+:107E9000F383FE685FA06F5FCE56AE5B816811C949
+:107EA0005796B7B6113FA24D0A6CA5FDD77D8FB787
+:107EB000113E5FB73978FFE8E6B4F5D62B90E4724F
+:107EC00047D19D04FE37A55D7753BB2FDBDF93259C
+:107ED000E68DD0BCB77C5F16F3BA1A53C97F820F08
+:107EE000F54AECD370FC0E7ED42BA2F920EAD538EB
+:107EF000320589754E663AE4B45D4CC7CD7641C70C
+:107F0000825049730FD231CE1EBA8CF22B7C7F94F3
+:107F1000E4700B865B84E760217491DC5EBFEDCA80
+:107F20002D627D85ACAFACFF7CFE7EE6499A2F804A
+:107F3000F3D3396A40EAE1FE1EC5A1065561DF1799
+:107F4000C6EDBB3D0BAD27CAC4FE7E33E51D53F520
+:107F5000BCD8D87F33EA0D2676F9AB5C64B0E54E29
+:107F600099ECCA398CD7C88E99F7DD269BECEFD4F3
+:107F70008E8FD82E5FEC3CD099ADDBE37CC8A77523
+:107F800084E93C90025EDD4F7AE93C3089FEC79D72
+:107F90000766660B397DED79E09DBABDD1A84E0E1E
+:107FA000D7D18F1393DCFA8F2E82F24AAE476884C2
+:107FB000F4C1FD6ABBC9FE1B381FF38A7A3BD9B3F3
+:107FC00031AFC06DB4DEABF5F393FED3C0F580E303
+:107FD0007A1C5C1F68EDB28642525C3DCA490BD7E1
+:107FE000A3F48337C4F52B41BB1A647B3996EB4F5E
+:107FF0005A4EEAE7BD7A3D438560D93F5C0F61AEDA
+:108000007F98E29E242FACE4F31990260DAC7F9864
+:1080100022DF2A935D81A3429E17EA20E43299D69B
+:10802000752E024029DA8457E2E48DFF9B9815945F
+:10803000B9FCE954E2F529265C98E57F6DB61EDFB0
+:10804000E8F21FB48EE443B1AF360EC6721D89D577
+:108050005C47F286850B366375241521D2B7094D2E
+:1080600062DFF862753CE63A1D731D4E9E3F914FEC
+:1080700005355724DCBFACB13CA17FF9CA2909E31F
+:108080008BD1A1C6F74B1F9A93307E58EB8D09FD1B
+:10809000119B6E49183F2AB428E1FEE81DB549EB53
+:1080A0005E0C9C8C09AF48B8BFD1F9E4BB84AF9695
+:1080B0003C59A578FECA8EFB4C7531D31817538CEA
+:1080C0007D785DFE465D1D9581119FC7A3FC1F2B2A
+:1080D000A6B8E9FE2A491B88036F24C87EFC1FC589
+:1080E000C17A931D30F4FF62FB373FD6FD849C526A
+:1080F00024519CE3C3B82A652AD5118B737B784B36
+:10810000D4AB7C96F2778E8B34C9ED856FD25B55FC
+:1081100089E2A07BAB348E83EE1D527480F60F7A19
+:108120007EE0F64AF903EB42CD75A0190EDF64E05C
+:10813000AD115107D982869EEC7F708683E38C87D0
+:108140002D96DBAAE3E87F225BD89F27B245BEF5D8
+:10815000735B7837D901C5016A539E789E8A1F8068
+:108160002A7B502EEE4C10F561F0C6DA9985E43F7B
+:108170007B466AE9543F8BFD6FE06525C4FEE496BB
+:108180006685F3BCD5CE27D99F942BC29F8C93854F
+:10819000DF403FD241F6F14DE97EAB88B382569283
+:1081A0004F810382EE72F6AF7C4E9C0E59D28A321A
+:1081B000AA4FBDE0B7B4AF104C876AA75A884FFDED
+:1081C0008B653E0F7E8948427AFB6B46719D73FF3B
+:1081D00085FA3F2D8DF2EBFEC58F9EBDBB32A69773
+:1081E000276DC9F3BC8BEDBBD56C793495CE514E60
+:1081F0008E8484FA8C37B3457EF866B62CEA0C423E
+:10820000EF79884D7D4BBE184E4407A4EE352E1CE9
+:10821000F2E0A61F54935C6CEDF382B4AF69ECE31B
+:108220005FC8033BA773FDB6912FDDFCBAD8D7BB5F
+:10823000F98BC47DEB8FB2C5B9C047F43E6CCBBBA4
+:10824000FCE3496E379042F0BEB27F3CC507D52AA9
+:1082500068E4F717F817DE7D14FBF3D64B1CEFD359
+:108260007D1A7F23CA90EE9F00EFAB7B91BECFB308
+:10827000053DF3A1DA4A74BEF6FDFA54C2D3EBE928
+:10828000627C54026D6BDC7C37E8F3BDFEFDE57B60
+:10829000294FA7F7D1FB891E7AFF3C154AA8FF1A80
+:1082A000F8CFBE5A3CF0BD3781CFAAD77B59C94F12
+:1082B0009642A8ED69B2AB472CDEB5C06D2493FDA4
+:1082C000929DFD525F53F4C97B90CE3FD5FE75AFB2
+:1082D000847CFDE3C2E8AF9FC6EBDFDD248386B874
+:1082E000F838C32F7BE2EAB44F2EFE2495F889F1CB
+:1082F000CAF69F92DEEDB47BA9AEE3CDDA9DC3E36F
+:10830000E3FA54CF74073D07932EED3CADEA89C9DB
+:108310008CBF15DB05FE56FC66440EE16C45EA0594
+:10832000DC89FEF6523E279D2041D2FC783FE24D8B
+:108330001BC17535A021CEF67F2EEACAF71CCDA849
+:1083400020FA14F05F16BF9E3D2FDD329AEB79DFE5
+:10835000C8BA243A496783687F6F665389F181AE52
+:10836000270B3A332BF478729487E2B9DFFFE6ECFF
+:108370007F105FF6EDDCFE43D6914BE3C3C03A5A63
+:108380007527DB27230FA3BA57CAD30E59D84F5EE0
+:108390002DDFCF7918D56970DE35A488C7A3C15108
+:1083A000ADC2BE89EF24300E6EF672BD27EBEB4AEC
+:1083B00055C42D469E245BBCB98AF8C8E0C5A93CCB
+:1083C0007F09D0FE989B122BC35E611CE1962DBAEB
+:1083D000BD029F03F3D3D1BA3D9BE5F15EDB22CE14
+:1083E0006B12E24FEC57ED4A127756E33F8E3B3764
+:1083F000FB9B53D82F6D96CB28EEF03922E4C7CDE6
+:1084000071E75458CFFB0003E2CFE7FE7249F1E772
+:10841000F73CFF3DBFB3D4A3B1FD098F14762E1CEA
+:1084200019C2790EFE55907E0DA5BD003A07CD13F9
+:10843000AD4DEA1DE940FDACF594AF7B681AC2650D
+:10844000A8E00FF551A450AA7D72E82B8A03BB1552
+:10845000965FFF73577CED772495A887E4EC23871C
+:10846000A770BD735F97D08FB60CEDDFA7529E81CA
+:1084700071E656243145E9B1A52759CFD3647F5120
+:108480001FC21E9147393AC4B9A843F301D99714C2
+:10849000551D4789B9317EB147D8DDFAC36F16D96A
+:1084A000503E672D47DD74BE52B7F729372E179A15
+:1084B00033FD0F90FE2C3FF9F20495EBDCB614511E
+:1084C000FE1D8EBC3C83E3B3D9C8DA7183AF27B0FD
+:1084D000A9823E4280864D99DC8EA27D15BC14880F
+:1084E0008875F676346724DB1F08FCDB5B0769BD03
+:1084F0003B8FA570DCB233BB9BF520380F603BF29D
+:10850000FB89CF47F37C0830A6E38A6A4D227FFFC0
+:108510000B7D3D3BF5FCB2F77399C719F38EE998D3
+:108520002EAB88ABB248EB41AEE3EAB46B24DF94E8
+:108530006D20F8D399C2756181FDD788BC335D9CED
+:1085400047B70D89FE91DE13DD67D7A84E35456D1F
+:10855000850C9CBFCD26FCEC2804FE53AED875E3F9
+:108560007D299D1BF92308C405D7E3A528ADF00D8F
+:10857000573CFF5399DEFD1E11EFB40D89585CE4A2
+:10858000273057DACA74C5E8047EAF41E7288E8BDE
+:10859000DB6CD1F769BF1DE9520917A340D0099DD3
+:1085A00023348A57525471AE9EA26ADEA03490AE34
+:1085B000C058086170000FAF860B7ACE7584436295
+:1085C0007D07EA425B891EC70417AF9B392DAE4F6A
+:1085D000866C52ECF9139E65EB5A0A695DC20F2A4C
+:1085E0004A98CFC7DD0B40A5F3EF14C5C77952CA2F
+:1085F0007CD09A505E4E878FEF7B708EA6C9DC8F41
+:1086000010FD2ADDA77D9B34D53907E94EFB328D5D
+:108610009F6BE8B672DD79DDDF6F4A2BC3F59DB144
+:108620001CBC6717B61F2D0C0FA773DA0969FEB7BC
+:10863000C81E3F736AD1BA3138FE2F6D56EF5CB257
+:108640004B3DC11FD3B97DED13568DFCE2836FF412
+:1086500047BE22F93E2BB15DECB38AFBD8D79AF026
+:108660007E43E707363AD7BAA6E36D1BED7FAFCC62
+:10867000F1BF4F7A30A9A3A98AF836195A9B699F8E
+:1086800013ED21D74B847385BDE87F65F8D6A638F6
+:108690003EBB72F47DEFA8FF72D29B4E5D3FF75355
+:1086A0007C84ED5E3D4EDB7BE0BBA55ADCF96910B6
+:1086B0000EF27EE06A788EEB3A8DEB7D216536E135
+:1086C00068F46B8EDB7C7138B3E5087DB7E9EFFBAE
+:1086D000798EFF4BD6DB03EFD8DCB8FEC09FC345D5
+:1086E000E4AFC218CF7D5D1D69C0A42F17EA8E4E7E
+:1086F00003DB919DAF7570FCBDF33E359DF41EE923
+:108700008734ECEFC5F882F4686FB1D0BBA657CFC1
+:108710008FA5FDE2F3FB965F4EFCEAF5580D7CCF8A
+:1087200018427AB41BD88E197A58467A28D1F77B2A
+:1087300062BFA78CF04D7A67EB9EC37AB7D702A4CD
+:1087400077886FC63BE25BA538A44C45BCF3F323A6
+:10875000588FDBBA5FBE82EBD991BDC3C651DFC271
+:10876000F86A8BCC0949F87CA53572909EAFC4F7A6
+:10877000376931BDAC9412EB7A167B449DAC611F16
+:108780007FA0EB6778A496E6C5F14E594EC07F9C5A
+:108790009F147DDD8FDEBBF127EB36A0BE94FA2A55
+:1087A0002C1328DE3926B31FD8AFC7C92BFE30E5FE
+:1087B000865DE23AFBCF888E8B837ADCFCDCAA5C98
+:1087C000EE935FD0502EE3B1F55550BD7763156D34
+:1087D000C54D9ADD7A88DA29D5E12A3A2E9CB6A0D1
+:1087E000FB90F8C6CD379AF0D67EF05BA3B94EFA6F
+:1087F000A41DE83BCEF6FF8CFEF1095CFF3DFB912A
+:10880000DF90342E61BCA1C766FC0D86933EA9E7BC
+:10881000FAA96897AFDBF8EB6B1574E80D04045CFC
+:10882000FF9C8DDBD605D1079EC8F15D9783F8FBD1
+:1088300022D77F5D0EF2ADEFF87F7AC89FEC7DE521
+:108840001D37F9E1769B6F34E1AABD04F3882478E3
+:108850009C926365FF5A3948BD49638EC8B7860745
+:10886000611DE1A5A15D5643E4A77DDDD793DF78C7
+:108870001F5949FBDA4BA707DD942FD5EC3DC47592
+:10888000FA463EBD04F43FF9D659C4FF73B9223FFE
+:108890005EBAC19A90DF8E80888DCE91037E576339
+:1088A000044552638A3BEEE8D8C2DF8DD46E4B7C20
+:1088B000AE8EE2148450DD45F2E3C61C7D9FA41405
+:1088C0004A294E41DCF03E49F455D9BB15B8BEAA41
+:1088D0008BEAAB765A049F9C0E6849CB88C52B2344
+:1088E000F27C4BC8DE2D31FC875EAF146D93F87BB4
+:1088F0008A513B44BE3CE5B4B685BF930AFAB84EF4
+:10890000AF860840BAA728415EFF94DC5208E2FA1D
+:1089100027A179267D59DA2985989FFA772F0AFEB3
+:1089200013FB459B65FECE6FB30499C5346F94F974
+:1089300053ABEF1F2EDF91787E51B7E9F8610A95AE
+:10894000EAC3A6F3209D3FE6F39DA7E83F929CEF84
+:10895000FC24478FE78AA028E1BBBCAE4BFB2EEF7F
+:10896000238A075C74F8080971F91E1D470DFABACD
+:10897000EB42B258378A82EAA36FD76112002FF315
+:10898000A91E71423880F542DE463D632D54DBA8B6
+:108990008EACBEBDE9309DBF2DD5E35A339E90A16C
+:1089A000CCAF657ADD50CDE6C4FBB53A5F6A4D7C4D
+:1089B00069F04B26FA44DC7DA9F4A1E5FA0EE1A0AA
+:1089C000769795EBB9CFC1AD5C7F55DFBE85E95990
+:1089D000AACB6F20BD415ECF325C0FE9D3A5D26B2D
+:1089E00096DF3103E757C01509F29B9D7949F22BB9
+:1089F000057539ADAFBF4BE4B5FD5D25BC2F61E01A
+:108A0000C5FCFC2C3D8EBE66938837CF7654392941
+:108A10001EE83BAA7825C47DC5B14FDDF4FD4DF9B4
+:108A20003E19E89CB4AFB3625D10EDE59EAEA13790
+:108A300069E807CA8F29EC372A8E9587528AA95F81
+:108A4000EE2CE53A132D93F2009C87FD70DFD1A147
+:108A500027CA384E9F5949296AD3D17227C50B7B43
+:108A600040EC6F48C72A337BE2FCCA7B3962BF61A6
+:108A70004DEEBB0F939DBA66B795F783AFB1465FD6
+:108A8000A23C6C4F97E26DC27EDDB145AB5348DE30
+:108A9000BF91BC14761FEE5E9145E735F59D56D526
+:108AA000CEF4DE7D90EE077749DE61383EB0EFEA26
+:108AB000D16DB44FB4A5C24BEC35DE579EAE3D4AE6
+:108AC000F5AE90E7E4BCFD9ACBACEC5FCFE43BFFA6
+:108AD000752EAEABD6B76516D9E133BFDBC37515BE
+:108AE0007D6D12E44AB48F7CE849AAF739F3F4713A
+:108AF0001B9D0757B51FE7BA8DC1FCC1D910E28E87
+:108B0000F3F6561BE537F55B8C7E0F7F8F52ADC7B2
+:108B1000510DDBDEE67E2DE50184C7CD7248C3FF33
+:108B20003CB4EF193E1F6ED825EA3E2EDCDF26F15D
+:108B30007D03EF8B74BBB51C34C6FB7203EF7A7DEB
+:108B40009481F7733097EBB496EF7A84F1BD44C704
+:108B5000B7B96E0A2DB0AD2C4BE82BEDB799BFFF1E
+:108B6000BB43C7F71D17C1F7A85C1DDFA36014E165
+:108B7000FBFC74514F77FEF81027CD7FFE08EFBE47
+:108B80007E1DCED9EF1ED5E382FE88C567BB323687
+:108B9000AEB7E313FE0E3170B4DF467527B33A3F2C
+:108BA0006679CCED3C3093F87D1DF8EB887FD77566
+:108BB0003A558A83E7F6087B36A7D3CEE713D74129
+:108BC000B885E4DCB7FFF1960CC2CDAF056E0C3B67
+:108BD000B74CE7EBB5653F9845F97BADEE0FFBBBB6
+:108BE000EE9CC576671C1453BC3747FFCE7B4E58AE
+:108BF000B7439B13F94EE7D424B7864E3BD79B5C13
+:108C00000B3D36F267D7EAFED3EC27FBF29C2CE74C
+:108C100020FAAB6138BE6E97A98E52E9617AFA3BB1
+:108C20006C7CDED560F2BFD372AD09F51783E1D35A
+:108C30002CAFDB72757FA2CB6B6E54D431CC7945EF
+:108C4000F6D2F94357647519C50B06DFCCF2EAD2A8
+:108C50004AD3BEEEF7125ED2E37CA37F83FEFD5BB8
+:108C6000586D75C5E7EDCFE75AF473CED04F2B7032
+:108C70009D7749D04D38C4FCE6867229697EB332AF
+:108C800017C73F5F78FBFA71F1F98D6FCB708AF7E8
+:108C90001E44BB5251C9F53BDD7C5EA8B4CEA57322
+:108CA000B0C02EAB97F29A4087CCF14060973D64FC
+:108CB000C179AF211C215DD59DD2D58423CC1B5A0F
+:108CC00072D13ECDA32D651C37AF03E3117C6EDE60
+:108CD000CC8F197F47868A75F72B5A4EB23CC2C893
+:108CE0001F1A3E17F1AA71BD01ED008D6FD0BF4B69
+:108CF0006B3FF8D7A2E2543AB7FDAC6821C5A9B9D9
+:108D0000227F31E2D528C6AB257ABC4275174B8548
+:108D1000E860E973F7D9C87E1DA61FB6A0FA49D549
+:108D2000BF86F261D50F8D3FA240436A613D6A2044
+:108D30009D221CEE95C4FECDB356AA0D81A6978741
+:108D4000705D60EF6BE21CCAACEFBD8BBAD95E9C64
+:108D50005FE86A24BC2D2FDBB206230C18BDFF751B
+:108D6000B637A37F67532D6A6C5D4DF4DD1DE7694F
+:108D70002D09F1726F47B38DF7A1E3BF1B2E1918B0
+:108D80001FD55F641FEB79935D41FA39DEED3B221D
+:108D9000ABB42F847CFC657E3CBFF478A8FD600AF0
+:108DA000FBAFBEE3AE10C5FD7FD1F17846DF976F14
+:108DB0009A24333F2C93453B7AFF3325245F9287D7
+:108DC0001FEDFDCEFDCF5CE1E37DF490A823DE91A5
+:108DD00058875D1F4EACB336F81AD0F98A740DA7C8
+:108DE000EF950DBAF62A3D6E6F123D92A4832C2F9B
+:108DF0008B9498E7069E95ABE3EB48713DB791DD08
+:108E00003B69E88B12F5901F7E2B5763DC34750AA3
+:108E1000F95AF68916DFFF1DB15F63E5F70FB83F1A
+:108E2000235847F7CF173BB9BE013E0FCEA5FE3DF5
+:108E300025E2F703EE79B97644FC3E1D48221F0F68
+:108E400058A35CEF17386E61FA02C7FB3D435D64BF
+:108E500017B7CCA43ADA6B757B71B8C45943380F95
+:108E6000D27B7362F32CC915E71B40EBCD8D7D5F80
+:108E700069AC7735DCC87C58ADE3EA3FF4BC1EF33F
+:108E8000A8F3B949F2A8C1E2DF0B74EBF1D3F9E919
+:108E9000DA89EF210ECA8F2841CAD7F7BC91122276
+:108EA000FFDFB46FD99F281F0EBC69078A43EED934
+:108EB000BF6C04D7E1FBFD57923D39BFFF8E2BB944
+:108EC0008E5112DF970689BE5C8AA75EF5509C54CE
+:108ED000BFEF55AE73ACDF3BFE518A9F305EBA9652
+:108EE000AE631CC3F82B3F56C9F8DB73B432B3949E
+:108EF0000807AF93E6AD3FA270DD63FD91CA17E7A7
+:108F0000525C736C06C74F46BC5441F938C54F4795
+:108F10008626C44FA979827F7D075278FF4382124B
+:108F2000811F189A809FBAF63F709C5187F62E1EBB
+:108F300047C673C5790ACF332C4FC74F58F2313E1D
+:108F4000768BB6AE630FAF6FB935CCF26EDA6515BE
+:108F5000F7DB446BD44907212348FC78912EA11CF0
+:108F6000E6D84285946FBE502CF20DB33C9EC813D8
+:108F7000E7852F9C14DF19BF30DD3F22D9F7C641AA
+:108F80009821F27049E777BB7576B2EF7977E4897B
+:108F9000FD097726249C4B1AEDA379425FE6D8C4DD
+:108FA0003E95F9BE3FCFF03FB08ECE634ECCB5AA12
+:108FB000C6EFB7E4A1DDBD1E8C3FEFABF3B3E89C79
+:108FC0004BE4D5003D33C91E7E9BF6F929FE9A2459
+:108FD000FCBAB1CF3F6F333C20F6F96FB5925D30EC
+:108FE000EA4BE6F9CCF157F5D534CF8DE8DF699E31
+:108FF0009B6627DEFFF645E2AE0579BA1F1F0EC35A
+:10900000455EE172923F38D76555655E476868B244
+:10901000EF0B0DFB737895383FEA42BB486DD3A840
+:10902000D779DFEA8503279F4C67BB9A0225C8E200
+:10903000ABBEFC9327D93C4D17F4757E02FE0C792C
+:109040009DA53CA06CA0BCEECCB3E8DF259DB1F1A2
+:10905000F926343E649107FF2EA969D4672DA44FE9
+:1090600067F5EF5E90BE227B9CDD3F9BF731DFBF53
+:109070006706448378FFC0283BFBBFFA99129F1F05
+:10908000D447843FAC9F2FFCE1F0F6792C97EFA0FA
+:109090005C7C5E3613AF515DAE21EFABBEEC9B69DD
+:1090A000E493748ED34438673B9DC56D7DFBDB2D07
+:1090B0007C5E897E97E2C21B2625CA6D04F81FC814
+:1090C000C6FB37CF96BCE84106C8FDE65BE7B1DCDE
+:1090D0006FD2BF8FB998DC7F9BE7FF691EE97D7770
+:1090E000FF77C6208B5E18F54111F9D7864170BD18
+:1090F00055E72F0C8D3E4DE765DE0BE7E97F7F3AA4
+:10910000FE3CBDC4E3DF924776D5F2A5FB0AA0F989
+:109110007A7EB942223901EBC5607AB5439F7F4719
+:109120009E2ADE9325CE8746E9FD17ACA142FE9E1E
+:10913000A2ECD2CE019B9E7D7E2CD9B9DE0347C620
+:10914000DAE2E47A6605DA07F237FB0EF1F78731E7
+:10915000DC5974DC29DC4AD28DBA1F4DC4E119C236
+:1091600021D9E7DD87AEA7FCF16CFB4D599216E7DC
+:1091700067F79E700F8B9BF7ACFEBB1898B70DFF7F
+:10918000766A3C9D0F309D67C3623ED4FFE1378D08
+:1091900089BFDF6C7C67C7787E7064239FD31B78A0
+:1091A0005640E0D9F83D8C0BDF55DA80BF7B0CEEE2
+:1091B000B7737D459F355A941EA72F1F1A72449886
+:1091C0001566312BB9DE75226CA8E273024CDED72E
+:1091D0004DA6CFEFC2B2A80F6DE4BAC5698DE025E8
+:1091E000DC4AB099FB13668BF3F229D02D135DDFB7
+:1091F0008428B73E50156A67508519B6931C61994B
+:10920000C2ADB6F6834EC257C4A3A4BFEF10A5A744
+:10921000C9E4175BBF02EF1B78C5C1180425FD4EDA
+:109220003F2B5FD87FAF53E863F4ACF8DD936F401A
+:109230000FD33F55E9667A53352D83CE4B763FB732
+:1092400042A6FA97FDA04549CFBC998DBCFF169D5B
+:109250000EE1ADE9B1F54EA2F5AAB1FE940560A10B
+:10926000F54AB04BACBF1132E87C6C3244F83D5744
+:1092700011C1B8DEE9A029D4B7E517EB7C16F95B7C
+:10928000959EBF591C41AEFB49CD17B8762A2139AE
+:10929000AF92B7B6C38FD0F94CA958E744BCCEE71C
+:1092A000388D82EE0BFE3A5FD8BB29106639430D2C
+:1092B000A82FF28F2BCC54895F52C463A1DF13BB5C
+:1092C00054BEF67980E977DF1EEDFD6165ECDCCBFD
+:1092D000DB99C3F5D0EB254B5426BA1C85A21E3A68
+:1092E0000261FE2E3392F87B67C5F9375E9E4F7E92
+:1092F000CF2FBEC335D775EE086DE5BA9B05416427
+:109300000FCD530870DA13AB03B09684F8BE95CE38
+:10931000D955AE33ADA07C715FB6FFF2FC6CAE37B1
+:109320001DC69329A1F1D5A931BC2365FCFB3B4E99
+:10933000486D257BD4ACD7D30655B75ECF54C4EB6C
+:10934000D0D0CEF38F4828A2AEFBDE2A517F7AEF31
+:1093500090FD5CE7DB23812A15D0F9FF7EAE03A6E2
+:109360001F86B3167CCDF97F96FEBB0F25FE3726F0
+:1093700096EA461E9F6B3E95CAF5AFCA0C9F46758E
+:10938000BCE67AF1D296F10FF5705E6AD06BAA1343
+:1093900057BC7CFF5EDDBE363BC4EF0049ABEDAA97
+:1093A000348DBE7F5FC1BF63D54CA141257DF7BE23
+:1093B000829FA73A662A02ED4DF3DF44FC32FF2E6E
+:1093C00015C2ABFF059A376D38EFF72593C73443C5
+:1093D0001E9681755228875B49BE46DDAD516F4BA5
+:1093E00080A0753B7DE277F054C409FFEE1F42C9AF
+:1093F0004EB8F4997FCF43D4FFB6E8FC47BA7670F5
+:10940000DDA7437CA76D7CCF6BE69B81DFFF02B9B4
+:10941000D77EA250530000000000000000000000B2
+:109420001F8B080000000000000B9B25C3C0F0A3A9
+:109430001E8145A551F9E8F81C9A3C0B0303C34F64
+:10944000205ECC835F1F2E1CCB82607B893330185B
+:109450008B32309800F12C209E0DC43F81D8508C67
+:1094600081C108888B81EC1220F6056247A0DA2FB3
+:109470001C0C0C13851918E600F1726154735F30EF
+:109480004268252E060653206664C66E3FA73AD072
+:109490005E5D04FF23906D6F409E5F46F1D0C35523
+:1094A0004EA8FC7C6B54FE2C5B0606666704BFC0AE
+:1094B0009A34F3ED817A1D9C71CB77BAA3F21B3DF0
+:1094C00051F97FDC50F935E1101A008D579524B819
+:1094D00003000000000000001F8B080000000000D7
+:1094E000000BED7D7D9C14D595E8A9AEEAEAEACFA4
+:1094F000A9197AA04706A8611A19E3A0050C30281B
+:1095000048CDA0384693349890D1D5BC168821090F
+:10951000CFD7F1ED2A1AC9F47CCFC0800DB2067DF9
+:10952000515B0C89262621899B3559B3698DC92346
+:10953000D96C168D9B47B2B86F243C379F9B79EE50
+:1095400043FABD90B0F79C7B6BA6ABA6BF00DDE4F1
+:109550008F37FCCCCDA9BA1FE79C7BEEB9E79C7B8B
+:10956000EAB6EAF1437C1EC059FC5B03F0A6170083
+:10957000964D95E94E33076DACFC1C98FDECD1A5DA
+:109580007AAE5362E5A2D0B84732002E8F66003C17
+:1095900000F1C38F8287D51B695461671380DFD8C0
+:1095A0005003A1A97EDD657F0F406E61E9F7F20BE4
+:1095B000A33123CCFA7B6A79B7C5FA19F9727BB764
+:1095C000D53AF5BE010765F8CD07864D3DC0E09C54
+:1095D00007C113051866632F64FF69F72521C1DAF7
+:1095E000A9B951301661BD5AAAAF3D73D4731B7B24
+:1095F0003EEC85EEC3ACD49E4DE7820CEFCB9ED300
+:1096000097C88C1EBF62797EC5607FCC934D231DA9
+:10961000B17DD4EF2946170EF576D1B314E9617404
+:10962000ACAA929E55A5E8792E9D467A2E7FD658F3
+:109630005C488FD6C8E9D11AFB689E4EC5183D4DCF
+:109640001742CF3D44CFB0A067D845CFBB043D1BE8
+:109650006D7A1A86889EA1398C1EF6C8775F1A1219
+:10966000ACBE86F484B19E939E21A4A7B5083DDAD2
+:109670001F879E0F09794B213DCB2AD393427AEA6B
+:10968000ABA02794019D3DF783641D6E9D8E975F6F
+:10969000F071D13399589AF53BFA7B99E699ADC8A8
+:1096A000D8864553F5C6055EDF691A8A8DA37C2DE1
+:1096B000783006ACBFD13912D577F7FB10A8547FAC
+:1096C00066A3D58BFDBFE34967FFA37338BE76FD64
+:1096D000DF8879FC0DC8D46E5628318AF0E882AF55
+:1096E0004112C7F166623AB66BE2ED06172CEF1E27
+:1096F0000F156BCFE919DD912679D672F710BFFEF1
+:10970000624E060C06FB9F4C02F25F8D717CECF6FC
+:109710000C2F802B90ECBB2C8BE30770119BA7F4D4
+:109720005DB9341B2F9EB9434B307E8C36F46948AB
+:10973000F788B1AF1BF5D6A9B80A7213E2559C0F92
+:10974000B65CAC81316D3E9BCFFE576473274CAF46
+:109750009746E1AA9F82959007722D407F6701E9A5
+:1097600049D2FC0F2E7890E85691AE4548570A0C26
+:10977000F6FC1B427E7CCFA401E54A33D2B1F4A2B1
+:10978000E9E38C20FF5BB1D74C6C4301FD3FB5E7AB
+:1097900097CDAB6B7E892F0F81954B235FFCCE79E4
+:1097A000B3CBEF09BE5FDE9826FE561A7F3AFD7CEA
+:1097B000FCBF0683FA012D134B84A7F019F58EF731
+:1097C000A15CB335691E62552E63E37414F0DB3D72
+:1097D000DE249D4AC621C75F137C1AF54FBC50D8C2
+:1097E0009F1B9F6F897ADF029D4A9BAECB9EE5E36C
+:1097F00054EAFF47C8E27AACEF5A574ADAC1F77B1E
+:1098000045FDCB9F73D62BC59F8F4FF2271D437904
+:10981000B4D723FE59330184C8D05F6839C025F816
+:109820007F5893DFDE367E172EADE3D1E4296CBF7F
+:109830000D92F302CD6CBD78939FC5729D62BD49B8
+:10984000FD42487FFD52217732E9013E1EEB1E5852
+:10985000FF61D19F2275013079F6B543762743ED3C
+:109860001AF9784E62FCDC0760CED20BF6F5137C59
+:109870005F5FA967D7E27E7EA5C20861E3D580EE6F
+:10988000C712EBE758BDC8B290C946021FFC594D3C
+:10989000A288DCF8DB20EDAF61E3B7AB8E75E1B7F2
+:1098A00092807A211C839C3F02A04BE128E1BF02F9
+:1098B0005670FC0D09FBAB538C5E858D23C73DE6CE
+:1098C00041F6B46615ACDC54208786C4E5B737EEA4
+:1098D000F1205D434CFFFBD8928CCC61EB1DD7434C
+:1098E0008CD91B45E47652BFE765C8CD60FDE625FF
+:1098F000C82D657008562659BB8C0F569EA471C1A1
+:109900003C5844CE364A7C5EA5F8C4D9B3641740AF
+:10991000F65AB20B32B48ED578C6C27D40B322A6B9
+:109920000FA7FDCCFD5CAF2960A19CD4C633B91A4A
+:109930007C6F5CDC84F8CE8AA7E0B5565E9E28C0BA
+:10994000570BA563643F355D2CF515EC63CF33F9F8
+:109950003951206F233BB81D30D83424F4CC8749CB
+:109960007FDAEF3F20F8A48E3364902E43CDCE975C
+:10997000A6CBF588545C4F6C16F4E2DFD5CB9DF294
+:10998000AACC14F2CA86F02940F235FC1464115FA7
+:10999000C6C9176E63F0A52F6AB093C9572B1CF583
+:1099A000A0FC5C0613549AA0CB582E0193CA3648EB
+:1099B00050F9DB0E26F7ACDC6631799F4FF2FF3EA3
+:1099C000898DFF9B39C98511F6DC1F4F5F81FB0B29
+:1099D00093FF8DF89CC98984F2546741D1FDB2563A
+:1099E000E2EB75AFA2FBB1DE5E0B483FEE97FAD318
+:1099F000B84F8C083B69C40F8E75BC47D03D22CA56
+:109A0000DA7812C6717ED9BCA05E7FBEE9765AC7ED
+:109A10003E85C3436C5E48EE56F37DCC8D8786F35E
+:109A2000B2E8FCE761E31F7F1E86A4FAA2F3308C44
+:109A3000F3B051E2FA53FD391FBF0C7DB44F6FEE06
+:109A40007D9CF8AF9E3CB7FA36FDCB5D7A7385D02E
+:109A50007357C2C45C85E9913B7C39559108EF4747
+:109A600010EF377F72F403480F8C2717E23EC5F0E2
+:109A70007E54223D9982A36C7CE515398B7E8A2722
+:109A80007883962CE3A780CEF49926F4D97CFCDF6A
+:109A900046FDF5E074FD7BF1E10F1D237B03B4E48B
+:109AA0004ED44FAB531ACA457FE3060DE568B89113
+:109AB000C128373155932E676508BA50FE6CFB6399
+:109AC00028B669A4298A768FB91CBBB5C75F1B4B22
+:109AD0008244CF93337C4DCEE73FC3F5AF2763324B
+:109AE000A34FCD5EAB219D83FA06ADD0EF5243C9A3
+:109AF00098CAE47018C7C3F1BDA9234D6DA83F6192
+:109B0000691FEA733D054B51BE639D84E7DAC68445
+:109B100086EF7DB125E03390C509B2AB86A24E7FBA
+:109B20006EB8F14EB89DEAA7E0F5D074FBDA174A9B
+:109B3000815AB04FE03872C13CFB94540EE99263F5
+:109B4000C5F5EE3F09F9F71809DA6F20F3494B63C1
+:109B500072EF1532E08DC14FA4CB0AE6295AB0EF5F
+:109B6000B0791AF29BDDC5D625DB419CFD9A1268BF
+:109B7000CBABEF776ABF15F39E5931324EF31ECE51
+:109B8000E0BCF733BD4FFBEAF170F61023A1777507
+:109B9000EA317CEF4D2BD017A56E5A709FBB5B7ED0
+:109BA0008789F2B707F9C6368EB11E8DCA9D3D3A38
+:109BB00095233D312A3F19FCC467C759BBED699F06
+:109BC000EE4339C8DCFD25EC8F79DD899DD86F9493
+:109BD000F58FFD2A9A7E484798EF3BDE382F6FF1CC
+:109BE000703ED67802846F9B87DBE10658242F19DC
+:109BF000BDBC9F5ED3EEB473C366606A3DB0FF82A6
+:109C00002D750ED86F5CE4A8EF5E2F2F79B8DEF0CB
+:109C10002A09305BB12CAEC7CF4A32D593E5C513C4
+:109C2000687F28B354B20B0625A7DE7ED4C3F7BBEA
+:109C3000273C1AD11983896F9F65FCF0EA1EB27B1D
+:109C400022B5F30FE7903FF5AAB9801511EFB85E82
+:109C500057643C882ABF1E2F58E74F4956DCF3272C
+:109C6000C0A769F4F7763AE47A9787EF7767C57A01
+:109C7000917D5637EA9918134320F9301E473E78F4
+:109C800082ABCC16C687C15AD5407F68A0D7537423
+:109C9000DF71F341AEB92586FAD1CDF76F09397A74
+:109CA0005AF07DCD99F7909ED8AD7BBAB221E4DB16
+:109CB000D12ED4F3036D1E0FCAF99F0CFF5C746C98
+:109CC0009FE4DF241DC4B78128B79BC774263FB823
+:109CD0009EA35C7E0CC875D17B93D1254DA7CBCDBF
+:109CE000BFB79B3E9BEF35B59E44B615F19B481020
+:109CF0007EAB94A2F8FD47F1DDC62B3489578EE385
+:109D000065FE69E0F594943C88EB7B8F90D73DCA63
+:109D1000B8867A216ECB4D90AFA3E97A4972C83BE1
+:109D2000EBE7F3D8CFFDD80FAB7FBF32E1E8C7AE8A
+:109D300017463EF07591E0EB42F9A3AE0B1BAF9DC9
+:109D4000026F03B25CAE5B8ACBF5DB8D97BD9FF6ED
+:109D500005AF02D437B5A104D9DFB342891CF2ABF9
+:109D6000BF5E35D0FE618E12EDD7D4D428F093EAD1
+:109D700037C6B0FE607823D9E583DE04D9E947EA27
+:109D8000BF66DDC6E8EA3F53033E93F903C1AB8EDD
+:109D900018A8178FC8E4AFF59F699E952A32CF4166
+:109DA0008C8F31FC03881FD9D5EAA4118EF8F68771
+:109DB00098E263FDBCD10A59D4A7DE901543BBBB22
+:109DC0007F9166F651AD04207FFB821F684FB64E2F
+:109DD0006F1F0C0D7D4CBE6C6A1CF6279D45DB97F2
+:109DE000EDE1E8C7137D92E37D513C2AC1DE29589D
+:109DF000A7FE196C68D8B5649D6D9EE23BA3A5458E
+:109E0000C17D130226CE7F3CD1D5F73BE4D3F76466
+:109E1000D2836EFEFCB59C0CC8CBA6606F3449F3B0
+:109E200066F7775DBD427A546984AC4FC251135DC9
+:109E300068DFF6377A28BEA68436D494B5BB1BAB50
+:109E4000B3BB41C43D6C79E8F8391F376072FD1D22
+:109E50008671C0B84A0DF0B8462D1812507B534A8F
+:109E600050B06415C553A2FEB7BADF5BA85FC9DA6C
+:109E70000B6783E7D0AFC2FA6D7E1BFAAD80AF1FD0
+:109E80003E45FD32F5103D3B63AA5F6F2C450FE167
+:109E9000CCD9B3F272E04DE82F49F2AD784C5A9F1D
+:109EA0007051C43CC48AC1E89D0E7FEABDF27C4774
+:109EB000DC54D5873E264558D9B8CD1A2FD00FEEA1
+:109EC000F9EDC681D0BF6CDC628D57A137D0EC2E86
+:109ED00016971A5293D95EDCBFE786288E084A8A05
+:109EE000E2C2C352DD12B49FED7A4AA39A43BCC2C8
+:109EF0006D561AF5C5F00C8F299BD8EFD851F40791
+:109F000040BEC14C96892F298DCA2F0BE9F9CF721B
+:109F1000384A788A38577F05791FEA297F3EA1AAF7
+:109F200066B2983F9396B9FDA2068ABFBF5AEDDC90
+:109F3000212F9BCEB70CF28E3D1FAE652EF7E55C50
+:109F40007C500E94C6EF1E433E0C35AC8B95A31788
+:109F50007466E714F845A66AED94CBE3B1A7181E22
+:109F60001062C2B3B2CC38627EF5AB4D1EEF40A595
+:109F700088E771C23E637847A4995C4FE3DFEEB691
+:109F800083398CA3796F0B59387FB2F524C8ACFEA6
+:109F90000F1B6490DA110EBCE6A1F95C6592BE6AF3
+:109FA000E1FE9DC5FE211D9155AA63DF42FD39B931
+:109FB0006F35A1FC3BE1CFC9CE78667FCFB3F0B35C
+:109FC0000553F8B34756B178B1A2761E2ECE8FBA9C
+:109FD000AAF8B19FC90B3079D9C7FC46C614C8305E
+:109FE000BF11E13DCC6F04F2270D2A077A5AA8DC95
+:109FF000854D57E2F9596AA4A909E3A59F8E7D9082
+:10A0000055D98FBA83CE55029D183FDF69C3EC89BD
+:10A0100084B03867F941FFEF3A301EB3D3CF618087
+:10A02000890ECB01CB7D18EFDF19E6ED7F26873A4D
+:10A03000F13C62BF384702C5D2DE57E0FFE7652F2B
+:10A04000D18136106FFF9B5EECCFAF08383D87F0B3
+:10A050009984191F111FBFC6E1C681B9D43FA90059
+:10A06000365E7C601E1F6F01B7EFA17543053EF69B
+:10A0700091FCDF84877048736B1D1E2A836A9A8067
+:10A08000DBCDFE5A817795FD8092E4FB9D882B9570
+:10A090005E3715F6358147A5F907F44B317EC1F4DB
+:10A0A000701AC7FDC7E2FBF45B3DEE7EEFB9F145E8
+:10A0B0006D9F482B8CC57F29277585C161EB70AEDC
+:10A0C00089C1911B72695ABE558EFB6B5917F1D02D
+:10A0D00024AD7F9BCF8ACEED8EAB5DF3E88D5A74B5
+:10A0E0002EE90FF1F5572DBE2B719C827EE0E9CE53
+:10A0F0008644B874BBFA8467CADE62FFCDE80A4CB6
+:10A10000D96BECBF5AABCE01D7B45FE4A81F36E7DA
+:10A110003BDE7BF57738DE9FEF3C5DE6A2A3D9E618
+:10A120009F80636E3AAB963BC510FB5C9ADB8F93C6
+:10A13000B0D88F2BC167163A61DEAF0F6EAEE1F675
+:10A140000DB763FE13883A6E3CCC02FD2B633D0EC7
+:10A150001B1E096CFB36D732BDFF7EED131487B38F
+:10A16000FA15F05F353D4E97EE4C519C2DDDE7D34F
+:10A17000FBA31477A338DB7666C8FB58B9CD9BDC0C
+:10A180008AF27BDA3F370B11EC37B502E3D6FDAE2E
+:10A1900078825B9EE29FBAA9E879995D8EF4F0F827
+:10A1A0009F0D6B8DC5F300EE55F879FD77BDC97B2A
+:10A1B000110FD48D40715AA075E035F8FEF87CD3AC
+:10A1C0003AF805F9FFFC7C4C85F4B166464F86F9F8
+:10A1D0006B3B0DA49BAF9391A6755A9C3DDF5BEB47
+:10A1E0001136DD04D94F998E990DB89E6A94093ABB
+:10A1F000B7AB8917C7E77EC523E6EDD6B2F4B9E75A
+:10A20000E3560CB4B2767BE7481EE2FF1C4FF61013
+:10A21000C6A31A3DB4AE775BEAE378D4BEBBADEE1D
+:10A22000268AA75BAA47263A725AB1753828ECA647
+:10A230007E113FDDD3C8FDD6E73B5ED7F0BC668F0D
+:10A24000D949F9004AE687D47E58F03BB3F804C5F3
+:10A25000C9874B9CBFF429DCCFEF0F07BAB345DFAA
+:10A2600047E87DA6A9E38587900EA67F0F917F061C
+:10A270000D5B181DBAA52F417EEF9D63797E81721B
+:10A28000B5DA437216C1B89C8CE7A24EFF79EF6A2B
+:10A290000F9DB366F49089F6FB29EB0DA08D48D194
+:10A2A0001BF07CB1E6F8953AED95CCDE6928B0F369
+:10A2B0006B56A556E07CD974F9607DD1F990E66EB5
+:10A2C0004F223FEF5E0206FA63BEB95DB94758BF41
+:10A2D000A757FA7454055787AFCE7D13E5896D2BC8
+:10A2E000E827FBA2560EED267F77100CF63E123BB8
+:10A2F0004C76941693C142BBEAFFCA345F4C671098
+:10A300005DCAFE9547D7B0F6EA6ACF2CB2CB5AF9B0
+:10A310007EA3B37FB8DF6871A75D257B73D4DFFDB3
+:10A32000E38FD3B9B2EAB2AB1428A88F76D7EA0D7F
+:10A33000EF692EA20FEC521E8FD0B92EC8B794B57C
+:10A34000B343C73FFC0F2F16F0FD84E2B2D385FD67
+:10A3500066F753CA7E3BDDB3F51F5E64B29CF4F230
+:10A3600038A8A25ABFC47579429C2FEE75E5DD244A
+:10A37000BD7CBD9C16EB186716FD6DF48F915F03D5
+:10A38000D76CE47E16980E3F86ADF7D34A819F6D59
+:10A39000EF7719ABBC3F3195D712F2C7CBE4B5AC20
+:10A3A00057928AB74C5E8BBD5E47575B1063F33B99
+:10A3B000560BD93E9CDF35166C467995C0ECD379A7
+:10A3C000FD09FB1CA509E5F01AD882EBD7504C3CDF
+:10A3D000871C6C7E3773144BE3AB449DF251691EAE
+:10A3E000B7BBE671B6D769877B2151936BC23846FC
+:10A3F000EC26C463775435713D7A3DB76CDD644C0F
+:10A400009F4758C1F586379A8362E3DAFCBCC36B79
+:10A410002DF4629C5D358F2551FE3B55F27BDDF5B9
+:10A420006FF58A3C962650D03E4BE33AC1F5DB658A
+:10A43000F1BC31494F3D6C12FA09C7B956FC4DCAFF
+:10A4400067FB940CA919AB006EF436713DD3B19142
+:10A45000DB3DD78324D762FD24ED5F0D962EB1BE80
+:10A4600061D4B6CBF4DB62EB0BF4E48D423EA7DEA5
+:10A470002763EF73BCF7723CC3C26ED637C7D62FC3
+:10A480002AD2BEB6B89EBC5EC8F58D5E614FA437B9
+:10A49000535ED0A0714B02F93CB0C632B7A0D64291
+:10A4A00019C17C941038EC6326DF37223FEDF89118
+:10A4B000A227A8B4ED8152F3EFB603BC3167DE49A1
+:10A4C000B5E7B6F1FD37951DC7BD3FDBF96DA8F9BE
+:10A4D0000AF9E4157C6815EB65CA5ECA88F56E5208
+:10A4E0003E90AC5A498C4BCA1238ECADBD425EE48A
+:10A4F000007FEFC683F9CF77E13A952316F9D7109D
+:10A500006AE3769B621AEB8BE06F9F733E21F278D1
+:10A51000E39977D3FE3756DB49FBDE805E5E7FD85A
+:10A52000FBEA1AB841C3B8DD6069FD3156A83FD4D3
+:10A53000A8C7B98E857FCFE8378AF1D9E6534CC4D6
+:10A540004BFBC31B6365E382AEF31553B51E22BEFE
+:10A5500094E6DB23E7C3B7319157B763F0E51744BF
+:10A560001E82535F2F2EA9AFBFE0D0A7425FBF8DE1
+:10A57000FC7FEEADE07FB57118FF76D9383983A93D
+:10A5800078254DF48C1AFBD2148FC1F58D7640A638
+:10A5900083F215200EA417B121EA3BBF6111DF023F
+:10A5A00022CEA4363AF719391A70C0B1EE3460BE23
+:10A5B0001AF68B74FBB7AB34AECD6F66B3503E99D1
+:10A5C0006D5FE272427FA4547E9A5DDAF11B3CC655
+:10A5D000394BFBD4C78F207F4F8580F687D2F43B61
+:10A5E000C789BD37515E3FB9EA4348315E2F722EAD
+:10A5F00038BD9D02AF17E8B5FFE3D227D693B775F4
+:10A60000931E058F89F1CBFED8464832BC8780EB7C
+:10A6100093112C57623EC9121DFDDFEF7A0DDEDE6D
+:10A62000E0FE9D4713717AA33A7FEF6EB60F15B324
+:10A630007F2E56B97D7CFA13A9DF625E427AA76449
+:10A64000E0FE76B2274FF6D3A6DC252AE6A55DA26A
+:10A65000CEA47A9BF637A96B0BD6E726E0E7FE0C73
+:10A6600011B5508FDAEB4FCDF85E403A4F64785C0D
+:10A67000E344E6DFE85CFFC401398B4C3D31726393
+:10A68000D9F57352E86DBBDEC903B285FDA547A4B9
+:10A69000EC02D6FEA462458AE60140969F070BF8BD
+:10A6A0008319D92197A7772455D433277B34E967B9
+:10A6B0006C6E6E473A19FE9B324D2AFA6495E89A01
+:10A6C000A13AE7D3A67310F3159AA6F27706A36F03
+:10A6D00010BDA7D873B94C3C69A7D01383D1E2FA57
+:10A6E0002420CE5F03DE6CF1BC0717BDC116E7BAAC
+:10A6F000B4F11B16F914C33AC76B38E6A179186E8A
+:10A700002CAFC706C43CD8F50663FCBC755049683D
+:10A71000D5E0E3D59DF8941A475B75B80BB7F91AE5
+:10A7200048767536117B5FC63802850E0DF49F9E04
+:10A73000923EC4D6CB0F6F0B59520C1F4EE4BEC9CC
+:10A74000E898C5FC1DB44F752B2BCD6DC3BC4E19BD
+:10A75000306EFCC89FBF917B15FD51E6FF205C6BFE
+:10A76000A4D65F6B601E5C52C275B51B953F75FE2B
+:10A77000AEFE8E56B1FE18FCD1A1CEB5188754207E
+:10A7800021E2191E03F3F568E97B4AEB09D49E67C1
+:10A790007D53ED4AD2E9F28B7CB0A1BCFFBD95D7C9
+:10A7A0004FB37FA87766B9FCACDA6EA7DD5DE37ABC
+:10A7B000BF57C86B29BFF2AD1A6726BCACE1B9AC74
+:10A7C000D6E6D1B3581F52B5B8DF466E5100EDF84A
+:10A7D0009986DE8B21BE4A7CDF053CCF0DBF8828E1
+:10A7E0005C7F9F51B91DDB78E7A725DC9F4EA197C1
+:10A7F000BD18E1BC594C7EDD76DF887182E2894369
+:10A8000070B4AB19EDF92D1E3A4FDADDB6AFB6B024
+:10A81000FD77C43853F30F86B29C4E65C99F57DB52
+:10A820003C16EE5BE73BFF6E3FB9D2FC376C75DA46
+:10A83000C5E73A2F2F21E2CB2ACFFF858E63CFDBEE
+:10A84000F4F5C1F566E39D2F521C67CC2CAF6FA6C3
+:10A85000CFDBCB346F9136B08AC5717E2CF6317761
+:10A860005E9F062930313FF115BEFFC8CDCB63078F
+:10A87000CBE81F39EEF23F443FF90F021CC5FD56ED
+:10A88000312A7C0F7778BFC2F6CDE0F62BF72B4B41
+:10A89000313FCBA23CAFD11E8B9E4FCEBFCF23F01A
+:10A8A00095C0B35CE81583CE3FF72B646F78E02C3E
+:10A8B000C6414007C3963BC07A5DFB158AC7182284
+:10A8C0008F80559D89ED80F4D2624CF6ACA7737AE7
+:10A8D000EA073BE271986E0EB386344F5ECB22BC22
+:10A8E000948C7627E3E72EBF800D01D70A581770A6
+:10A8F0009380611FC14195C11897F7667482030266
+:10A900006E12709D806B053C5FC0D23E8277A9BC01
+:10A91000BF9D4A96F71F10B021E03A01EB029E2F2F
+:10A920006038C8C7F77118F7438283026E12F00CC3
+:10A9300001D70AB859C0D241824BCD5F206E117F3A
+:10A94000A7E6BF8BF30D40F89B0917DC3D55BFC050
+:10A950001F1DEC31A4C2F3436F89F8D3121FD73304
+:10A96000131D09CA5362FE42FA44E1B963ACB8BC94
+:10A970005BA2DDE4B97994D52B1ABFEE2DBA2EAACD
+:10A98000C56FDD79E2F7DEFF20FC6EF6D9EB9EFBAA
+:10A99000E7131D26E1E9EECFDD0EED2D2838A70FD8
+:10A9A00028D934C66B988D44FE8E5773E6B3DEED1E
+:10A9B000E3E79CBD3E9ECFDA2FF09BE8E0E70F83F4
+:10A9C0000B02D983D2F438E35FF8783CE1FB369E82
+:10A9D000DA61F27B8279B662C90FE27ED468BCB3D9
+:10A9E00042FEBAF2FF0AFD65771CE4DFF01D1B276B
+:10A9F000102ACEA7BB27F5CD2DE913ACAEE667CF65
+:10AA0000D19FD1A3B1C6C2BC69F11E248F4CFAE517
+:10AA10000CAB67E78BC8D43F8F1737F278B12CEABD
+:10AA2000D3384DFC3B066B09EE33EC798B18479A13
+:10AA3000DEAFBB5DCE57C7E74BE063E7A7C8F01CAE
+:10AA4000F533898F92207EB99F631EB21EBAF0E75C
+:10AA5000170A7B8D12E365F8F94BA5F69F15F232C4
+:10AA60004D3E4BCCEB7FF3D976CA610BF3816C3949
+:10AA7000B2E5EB7CE5E882E50437A4B6D2729286B3
+:10AA800014AD1B055DCEC5E72E2F45E4245758BFF6
+:10AA90005EAB15E7F926C90BC34721B9D5393EF599
+:10AAA0004BA2D49F846B7C21F62060E403A3F75271
+:10AAB000AD56F081C7290278CE58D09E1147F84A8A
+:10AAC000B224F43EAFB746E3EB7C756723C71F445F
+:10AAD000FF2E7C597F5A617F3234BAE49CE3FD7EBD
+:10AAE0008DCF2FAB4FDFF94D1B5F91085F191269B6
+:10AAF0000F6BF75151DFADBFEC7287C06FD4035BB2
+:10AB0000F977920928FCAE32A879C4778F7C9DB979
+:10AB1000F59317E56AE9F9CB55B57ABD5E2BBEEF23
+:10AB2000303DDF82F1BE52FBCE316D723F6811F3D2
+:10AB3000764EF3FE6BD443CBA6E6B35A7C2F15E3D7
+:10AB40009E2BBE27A7E35B959CBD21F444B5F8ADD1
+:10AB5000394FFC5E76E1F756C9F519B11F558BFFE9
+:10AB6000FBCF531E7E309DBF55AD238F766EFCFD0F
+:10AB7000E879E2F7CF6EFC4AAC5B55E3FC4A0397F9
+:10AB80000F459CBF548B5F4F65FC44BED8BA012B68
+:10AB90004EF61AF9E3BBB5750369650A3F0BB85E5B
+:10ABA0003FD7F1EFAF7AFC770F58CAD4F88F68EF30
+:10ABB000768CAF2826095BB5E33E5AEDB8E9F73944
+:10ABC000E87E7AE47D8E71CF97EF5FAC7AFC5B1DF7
+:10ABD000743F3772AB93EE9049F9C4D58EFBCDF339
+:10ABE0005CEFBF14F80635DDB10F94B2DFCF08BBC0
+:10ABF000F6839AEE90E352F5DF10F6CABBAAAC7F5B
+:10AC000052F4DF6CE353A1FE3D02FF7BAAACFF6B65
+:10AC100081CFCA2AF1F9BE5887A5F6CF80E07B1014
+:10AC20007564815F73A1794B5B7C49C98FE79CCFC9
+:10AC3000F4D077826F289A8EF14EE802B2C7FDC732
+:10AC4000C307795E495AF8FFC9B4C4F530C5B7BC2B
+:10AC500051D3711E67FB5D8A92B08A9DB7D5FAB950
+:10AC6000FE9374B39BAF7715300FA954FDA0BF7846
+:10AC7000FCA5062628FF0462E21CE9CC8D46D173B0
+:10AC8000022541792DB2AEC24136CE40ED46A33009
+:10AC90006F396EE313B3081F55E7F8A88A6915CB1F
+:10ACA000539EE3E7F36AF763FB87526C02F83D0EAD
+:10ACB0001CBF417FA21BF3C4D3B52AF16920EC3C31
+:10ACC0001FBF49F4F34E41DF80B77C9E58E7CC7636
+:10ACD000CA57EA6FE7F94A069894DF39102A7FAF1E
+:10ACE000C1580F8FFFEF14F94F23F8FD287E4F8CCA
+:10ACF000DF8F2EC4F65FA1EFF04EB57ACADE8F1358
+:10AD0000369D71F6608BF37B1E3B2EEF379CDFF593
+:10AD1000F862CEEF7ABC3315CAEB1A08F1F3814A18
+:10AD2000F8DB79EF76BD6125A5E945F994759C0BB3
+:10AD3000F8624E7CDF3EFEF1F641EF61BD185E6FBA
+:10AD400015DF4AC51B26E9AD515359AE371CF91919
+:10AD50003D42BE7C355A0AF532D3BB25DE0778FB6F
+:10AD60005082F243B458C2A078B4D807345C0F05BF
+:10AD70007CFAA4BD2E031E3BDF98F23A24C3A2F353
+:10AD8000470DD79134BDDDE4BCDA72FFFBB5315A13
+:10AD900027F51AAD13C998A0EFBADCE32CF45BFBDE
+:10ADA000FC783EE6B71EC0D2FB0739596CBDECF506
+:10ADB000733DAADD9030B4F9E4AA92DDE3C6E34B1B
+:10ADC00062FD856CFCD316E55F548BFFA355E26FE3
+:10ADD0008FC3F0FF1CEA5986FFE7B12C85FF534271
+:10ADE0001FD581D14B7BB6C1F52CC07AA330BE1ED6
+:10ADF00008F07EEB849E02E870E4F578055DD5D21C
+:10AE0000F3ACADD72AD0638FCBE87951CCC777CAE2
+:10AE1000CDC7B7053D8100DFB7B40309832D4DB819
+:10AE2000B8C4BC9C1078CC0C88B852BAE39CE4EA55
+:10AE3000A52AE93831352FAF8A79F9E772741C17E2
+:10AE400072959161E549DC4F9BEDFC850D8E7999FA
+:10AE50002DF893F1D9F3D2E99897DA739C975F555F
+:10AE600049CFECA979392DE6255F4ECE0AEAFF5E7F
+:10AE7000D4FF83A84F76E2ECC0EF06F0BC6CA13F94
+:10AE8000E109D44FED6FAC9E1C583655EF93A347A4
+:10AE9000EC7A3EAAD735594F0B14F407E9D706F0E0
+:10AEA000FC7B507CFFF1FDD1F035A25D84DADDC082
+:10AEB000E961ED6A0AFBFFD2E82B76FF33B05EEF63
+:10AEC000DA3FD8F5A285F56607FE60D78BE173E916
+:10AED000C0647F0D85789CF0FFEB00CFD771E57BD8
+:10AEE000E9D5E53B78A349BACFA10EC2199995439C
+:10AEF0000ABF5F21CD8CEA43983FEB4BE6A00ABB2B
+:10AF0000CBA3F1763E666FE1F9F10C1D9EF71BE8CD
+:10AF100082987080BDDF1355C81FB8D39F6C0BD4C7
+:10AF2000733C290FE0556E8FF586DA441C85E3B536
+:10AF300037F88111EC4F677861FF9F0C469EC7FA86
+:10AF4000FBE6A894CFFBFC9CBBC84EDCDBAB00BE91
+:10AF5000DF7B9D4A76E203AF86691F1E54CC9B2897
+:10AF6000FFC1520DB41BEF0EFCE118E6298FF7D696
+:10AF7000E8D255440FE19FF640A29FFAE776E776C4
+:10AF8000863FE603D3D685FD76713F06449EF3DD0A
+:10AF90006B0DCA9B3180DFDF34DCAE529ED2DEC641
+:10AFA000F91D38DE03ED1AD91D0FDC30BF97F2B959
+:10AFB000DB0394FB56173224CCEF89AC50013F04DD
+:10AFC000A98B1ABD6877869707F0CE2FA86BE4E3AC
+:10AFD000851702DDF3E7854C22CECAC8884AF738C8
+:10AFE0003D70C386DC66B46BDA79FE3223ECE5F89B
+:10AFF0007280906025C83F00C4C73B9B9FE7DBF38E
+:10B000001CC94CB62F7B8E18C956592F575DBDF001
+:10B010008842F9C915EB65AAAC97ADB25E8ED7AB85
+:10B02000787E2FF22935F60FE3707E773E76A8FC06
+:10B030007771E79AAFBB37E0CCBBAED4DECED3ADF1
+:10B04000442F1E664EE22957AE6FE7D9957AEF9DE1
+:10B0500079570CBF4B1BAEBF5794F7F1B2413C6F11
+:10B06000D81EA3FB221BC4FB86FBE8FE48773F7F6C
+:10B070002BF4710B24CACE439DC0FF75863BC6B32B
+:10B080005B940AF900EE7C3F97DED3947427ADDB26
+:10B090001B787ED1E4F7938DE2BB114825E214CFF3
+:10B0A000B2228B674EAD1FEFAAEFD2FAB1BF9B64FD
+:10B0B000F3C3BF9774C9895B2E7CAEFC940B959348
+:10B0C0001FBF4D72E21D91AB5A3FDE4C95F5B25554
+:10B0D000D6CB55574F1D91AAD22B6AA6CA7AD92A28
+:10B0E000EBE578BDC195AAD8D7470731BEE5BD428B
+:10B0F00073C08357049CEFAF0C39E0A165CEF6EA2C
+:10B100007267FBA1E5CEF6EA0ADEDE0CEEBF261D75
+:10B11000AF7E9DFCAFF35C272D5AF9FAE1F60AEBFE
+:10B120004AD3FDD8BE4E3100EF1762FB5556EC5B9B
+:10B1300045E33FEB827CFD5F17D01DF7D3FDA9D31C
+:10B14000D912E4F8DAF456C2D7D6BFFF220BBBAB54
+:10B1500044DE3D7E564079D830DE80FD3D7FCFCC49
+:10B1600006B4E7F6BEB682EEEFE87F979D376352EE
+:10B170003EA472EC9764BFECDDCEEF977EB4D6ECC4
+:10B180008AA3BD12F600DACBCC8DA27B3DF6C63C7D
+:10B19000648FF45F5DFEFE924FF5F03CA187D1EF26
+:10B1A00067FAFF80B877EB4171EFD6FD3D0695BB9E
+:10B1B0007B5AA8DCD5635239DAD3CEF3197B2CF154
+:10B1C000DD5917955FEA49D0F32FF47453F9F99ECE
+:10B1D000243D7FAA672B959FED49D1F3433DDBA921
+:10B1E0007CA2274DCF1FEF19A1F2B19E0C3D1FBAD3
+:10B1F0007A03DD9371EA3E0F7D1D520AFF392967FC
+:10B20000DC61F65667DCA121E98C37CCEA76C61BF7
+:10B21000F455F31DEF236DEF70C0A1D6258EFA8192
+:10B22000F8150E586BEC74C04AE89D0ED87C6E83FE
+:10B2300003BEEC999B1D70EBD39B1CF03B3EFD11B4
+:10B2400007DCF2A93B1DF0C5FBEF75E0171FEB73A0
+:10B25000C0EB83F3F97DE0033B1DCF8DFBF639E0B6
+:10B260008FCCB41E0B623C3413E1F6EC7189F6C14D
+:10B270001973CDDBF03B29F8B14CF204519E0F3F1E
+:10B28000637EEA72BCA70C94D48A1BC395EF91B677
+:10B29000E33D72A43D89F27AFA35C9407B578A6C46
+:10B2A0005F58E8CFD9E5D65329388C71499167A604
+:10B2B0005F0496C5DA05983EA1C34548E57650DCA3
+:10B2C000D243DF5165A424E59B309BD9FC2B1DF3B1
+:10B2D000E8DDFB6F90ECF253519ECFDED1A9350D26
+:10B2E000B0FABB17A926A6784DC3D775BFDDAF82CC
+:10B2F000DC0FDEB583C72BF517FC4D1A6B1F32939D
+:10B3000033D055B5DB8572DFA3EF944286B91CFDBF
+:10B310009A503C039B43588F7FD7C7EA7F3558200C
+:10B32000BFA164CE5259FDD89664B387D5DF2DFAFC
+:10B33000DFBDECC7748F6038F713B898FC9DCFD091
+:10B34000F8E1B6A3707B18F5D338AC2BB28E77FF3B
+:10B35000BEF8F748E34199DAEFEECD82C9DA05721B
+:10B360005FA77B38ED7909B61E8524F6BB6A82BEDD
+:10B37000A1DDBD43A27E764B2FC56282CE5E179DB6
+:10B380008817D2753BEB27D49D94D6B5F2E7CDE173
+:10B39000A97EF1FD667C7F4B4AC23CF76AF8A72282
+:10B3A0009F928C7FB8DEB664A4B2FC337216F25B57
+:10B3B0008B57E2DF839C7F8C6FB7B74EE7D764FD76
+:10B3C000F45158DE5AC06FD11EF9727B11BE4EF295
+:10B3D00089B54F52FB97606988B7433E8419DD9B5E
+:10B3E0008BB5935E12E3649DE3303EDE4ECFD322F5
+:10B3F000BEC8EFF5B4F344ECFAF8D7B55CE42932F3
+:10B40000BABDE3B59BF1FBEB8ED624DD033C18F20D
+:10B41000D0FD4283A1AFE4E89E7E1DE8FB5945B113
+:10B42000FA7E14E571E83EA9D83A75FA09F8654A3A
+:10B43000E1F76403213B0FBF82BD24EE1596C5BD25
+:10B44000C2AA92E86AE2EBD9EC85A9F8EAF4F1F72E
+:10B4500011DD72CCB9FF0E6C71EE7B71FD668A63F3
+:10B46000F747ABFB6EC897E7F6A52AF0F1E683FC39
+:10B47000BEE3BC9FF0B4F233A85C93AFA5F2AAFC84
+:10B480006C7ABF3ADF40F0AA7C33C157E69BA8BC78
+:10B49000227F293D5F99BF84E0F6FC522A57E417CA
+:10B4A000D3F3E5F92B095E965F49705B7E2D954BD2
+:10B4B000F31D542EC95F4FEF17E7AF23D8CCDF48F9
+:10B4C000E525F9F554B6E4FF8CDE2FCCDF44F0C55A
+:10B4D000F9CD042FC8DF46703CFF51829BF31FA6B5
+:10B4E000727EFEBF52D994FF18BD37F21F27785ED7
+:10B4F000FE1E82E7E6FB099E93EF25B831BF8BE085
+:10B50000D9F9512A2FCA3F4065437E2FBD9F957FB1
+:10B5100088CA99F927E8796DFE712AF5FCE7C57D9F
+:10B52000D14F5119C97F95CA70FECBF43E94FF1BD1
+:10B530008283F9AF5319C87F9B4A2DFF3C9595E64E
+:10B54000A9D2F74F6B6086432E56E72F72C0574E35
+:10B5500038F7EF953F77EEDF2BC69738E065C79C4D
+:10B56000FBF7D2A39D8EF78B8FBCD3015F9273EE56
+:10B57000DF0BB3CEFD7BC1814D8EFACD998F38E0C4
+:10B58000A611E7FE3D2FEDDCBFE76CEF73DA2FA9C4
+:10B590009D0EB861AB73DF9E050FBBF2C90F3AEA8F
+:10B5A000D7589F73D40FB77FC575BE92E5FADFFCFD
+:10B5B00086D38E6979A1E8394C7CFF75F4DDFEA94C
+:10B5C000468FB86748DCDB2AEE4773CF679DD00310
+:10B5D00033F2DC7F8A8A75578FEBAE20EF89D91959
+:10B5E000AFA17EB0ED8C19F38D2FBFC8E0D373559A
+:10B5F000B397C1B69D61D7AFF8BB15AA399E6678DF
+:10B600007A8FFBE8DE3929D26D615CEDEE1312DD35
+:10B610006F57371B449EC0755D3C3E01F67D3A7402
+:10B62000BFCFF01CFBFDE66B298ED1C4E123A11D29
+:10B63000EB308E3AECB5DF7FFE5A6AEFE7F0FF0899
+:10B640006D19C2F775358763681FED2A71BEF93F22
+:10B65000432AF1B33664FD30B46CEA9EE9E3D1E4E9
+:10B66000CB21F67C9B969C875776E33DF7788FF34A
+:10B670003AC5FA11D65BAF58AF84685F70FA0FEF26
+:10B68000C7DCD765742FE04FF0BD1C7996F6A3BADE
+:10B69000EBEFA3FBAA86C30C9F50697CFE3E244FB0
+:10B6A000EE3760EF37F3299E4AF6E05013D0BD190C
+:10B6B000C3B58934DEE797FE8E06874CA43BC3935F
+:10B6C00095447EE2F025862D178EFD092091C33822
+:10B6D0007E301932D05E0BC151CABF88C004953A82
+:10B6E000E892E3BE6D9BFE399C7EBCFF3F44E7F0D1
+:10B6F000D6B3E314674D81B8BFFA4D7CCEF8723AE9
+:10B70000B4AC345FAE91EF039D8DFF28B327918ECB
+:10B710004781E33B86FEA98478A6F466EAD7798F51
+:10B720008472FCEB243776BC47915769CD488FB8BB
+:10B73000C7A18BFD43FBB03E513EDEE3BEB7E15CEB
+:10B74000E33DD1B03BDE13A2F3E453ADE5BF83B3D9
+:10B75000E33E63ADE5CF7B9F157EDFD7C479EF3342
+:10B76000E2BCF72BC2EF3B2CFCBE2FA2DFC79E3FF3
+:10B770002DFCBECFA1DFC7E027D1EF2BF8BEE4C977
+:10B7800012F7BF2CAC95849C6D27FB3E28EE2B62F4
+:10B7900023903D1F10F6FC98D93713FD8E602D6461
+:10B7A000D14FD87ADD41FA7E969162E2FD0077FCB6
+:10B7B000E2F599FF85C1F11838EE770AB4BAEE4B7D
+:10B7C000A8348E92B5B0DF20F31B326669FE9C73FD
+:10B7D000BF5A16FCE7D52FBFE7C7BEB78D71328DB4
+:10B7E000F21744BA7594ABBFA1714E897140FEC186
+:10B7F00011BACFF07205CAC9C1B471CE51FEB68478
+:10B800005DBF4FE1923FC0840D46EF3CF1BDA611F4
+:10B810004A37EF61EF9FB84F757C9FED96C7DED733
+:10B820007C14871D5CCCEFE579B17EDD45E80F7EA9
+:10B830007AEF9B4D889FFDDD52BFE98C5BCCBB0F3F
+:10B84000A4C27C9603623FE8D7CBCBB97DAF78FF2B
+:10B8500058F97A0F8A7A5F0C5A7D61D22B13741FC4
+:10B8600064FB89AE9B11DFC77668745EE36EF7C533
+:10B8700060726778D9743C0BDBA3BC9569BFAF5C81
+:10B88000FBE53FEDFA29946FFF70B8BE74FBB697E5
+:10B89000BB1EAE80FFC1E2E3A71FC376F3623CCEBE
+:10B8A000D4DB3044F3BB6B07F79F5F5CB48EEE993B
+:10B8B0001DA8E5F356A4DF2F54E04B7705BAFEAA86
+:10B8C000527BA93C5DDF2CC717C6D76315F8F29DE4
+:10B8D0000A7C3D5001FFBF2FC1D77988F73CFC7D22
+:10B8E00038D6AE770EE32BFA6FC85798BE1E8AF48F
+:10B8F0007BAC1C5E55C8EBF805CAEBCF2BF0B592BC
+:10B90000BC4E5CA0BCE64BC92BE27D01F22A47CAC3
+:10B91000F3B592BC06231726AF33CAB5AF425E67B4
+:10B9200097C3BF0A796D2E36BE0F8216DAD5A75A95
+:10B93000F939D9D60E7E3F99B785EFC3C1E39F256C
+:10B940007B6980ED5733DA71DF3EF1E01D6D53FB0B
+:10B95000B47B1F72F7E7DE47EFF8DF9FA17D342449
+:10B96000F67D1B1FBFE1EEA7FCFD16E73A6E007FD8
+:10B9700097A9E0F72E1A926FF578CE7D3E60F2F12E
+:10B98000818DBF96CE159FA673C59AF60B1DB77C09
+:10B99000FD59DD1766177C28E2B40B666FFFEA637A
+:10B9A000741F89E867B662D1EFF8297035BFFF646C
+:10B9B0001BCF1F92B77FF9B1934B0BEE9982C35205
+:10B9C00061BE90BCEDF063270BF0CA63FC87C79B98
+:10B9D000298F31AE5F11A07BEBC6CA9F67FC40EC9C
+:10B9E000E3DF17E71947C479C677855DFBA2B06B23
+:10B9F0005F10766D4ED8B57F2BECDAE7845DFB0DDA
+:10BA0000719EF1A0388FC8F41C20784F4F56FC4E21
+:10BA1000C993E2774A0E8B7CC967F9B9454F8EDB33
+:10BA2000C78F7FAD19F93145873B8EC5E9B0EF4728
+:10BA300077D3F12ED379DFC6F52D41C7BC5D6738CA
+:10BA4000E322D7C6663BEA5FA3373BDEAFD52E7550
+:10BA5000BCEF80A5CE384BFE0A679C65C21917B9AA
+:10BA6000F2E7CE738D95E3CEB8C88A63373BE32CFB
+:10BA7000479DE71A4B8F38E3228B73773AE0CB9FD1
+:10BA8000BDD7517FD161E7B9C6A54F3AE322B3BA1A
+:10BA9000F739E05AEB61E777F5EDCEB848D874C6D0
+:10BAA00045822D5F71C0EF61FB3DEA4FBFE18C8B9A
+:10BAB000F862CEB8C84F43FC1CD0F6B359BBBF8B5D
+:10BAC00090BF19CA5DC9E4FD8928BFE7FD09485246
+:10BAD0009E2CC09F93DFA04CFA0D16AD7B59E81D3C
+:10BAE000B5E1E48FD1AF517673BFE70E69454E2BB8
+:10BAF000F47BBCFF2215CA87ACBBFD870AFD7B4DDA
+:10BB0000F277940A7EC9F47EB9BE9ABAE7BC2D8D4D
+:10BB1000F954CAA45F72BDCB2FD996A1DFB39A5155
+:10BB2000DE2F9936CE39EA9FD391127E49CC43FC61
+:10BB30003314EE97EC32855F02FC7B29BB3F5BFF41
+:10BB4000A80DE5F5887D5F8BBA88FB0D4AA8F879CA
+:10BB5000B67DDFA4BAB87C7FB65FF37711714F5C16
+:10BB60000D88B8FEFF978FB7523EAEAC29113779DA
+:10BB70009BE5A354BD73950F057506E5837C70188E
+:10BB8000F3417C2E581370CDFDDBD6E1F74DDB8100
+:10BB90009FEFC02BFCDED552FDDBF95DF155B7966A
+:10BBA000CD83B0E3AC522D3FFF8CB7DF4AF993A7AA
+:10BBB000D818E5EED576E75BC8D114FEE81E7ECF37
+:10BBC0005EF4DCE79FEA785C28DEFD81B2F68AFB52
+:10BBD00077C1E256F97B764705FEDF7E7516D9A957
+:10BBE000BBB6717DAC747FF37994C74FA33C9A14B4
+:10BBF00057D12E41BAB62974AF5AC8008A0FCE0D5C
+:10BC000041B6B709F96AA6F13E2FF647E7CB93F2A2
+:10BC1000B9CD79BFC9EF74BE9EE389F27CADF8BBA4
+:10BC2000062B0F77D0774206A4F45A5A3FF07A9445
+:10BC3000F023391D6E37F9EFDF317C747D7A7B3765
+:10BC40005EEEF5A96CB98AE24AB3257B7D064DCC40
+:10BC5000D739150A95BDEF6D5ABFE7B81EBF306DD5
+:10BC60003DDED0F78F38EE9888236D677F05E79D1E
+:10BC7000EEFEECF568C3DF7EF56EFABE6578EC4E3D
+:10BC80007E6F71A3B81F6C8CEBC752781D1272B413
+:10BC90005BD88587F677F6217F07D8BA29D4470B7A
+:10BCA000FEF2BD81243F5FACC3F23307F877DB17A8
+:10BCB0003FB4453CDF44CF1744F9FD470B983C6146
+:10BCC000CC3BBCEC158DBF7F59A7FAD1F1117C7F1D
+:10BCD000B178BFA7BDCDC2DFAA8CD4CEEFC4521EAF
+:10BCE0003B4A7A97CDB9B5C0C07115FA1D9DB923ED
+:10BCF000F038D231772CB1E13AF40FD2C07FAF2DBA
+:10BD00009ADC89F21AC900F597060E1BDB759ABFFB
+:10BD1000F858721FD56FE5F5D97B82E7A6F8FBE0EE
+:10BD200018C317C733D97B03DF73FC1BB7E814AF05
+:10BD30000B8D1D4DAC257FC46ECFE1865B787B6596
+:10BD40008CD183ED6376FBF10CBE9F15E5EDD5310B
+:10BD5000BE3FEE69DF44F7EAB1F1E9DE29AF78FED4
+:10BD600084E07FBCFB5F336BA35379196966FFAE38
+:10BD70002FB29EED756FFF0E60BFF80E49D3663F80
+:10BD800072B2E05E06FB77430363CEFDF94C0D5FB4
+:10BD900097FF1DF5CCB2CAF7B3FD3B5950D3F30062
+:10BDA000800000001F8B080000000000000BC57D14
+:10BDB0000B7854D5B5F03E67CEBC3293E4E43D79C0
+:10BDC0004D4E2040944007081810DB495444458DDF
+:10BDD00068DBE0B53A04E419202296A0D89C9004D0
+:10BDE000F20206EB2F111126281A2BE86041B15AF6
+:10BDF000EF80B9147B6D9B5A2FA2A28DA05114B86D
+:10BE00002915C9DF5FAFFF5A6B9F43E64C2609EA4D
+:10BE1000EDBDF93ED8D967BFD77BAFBDF60E6B102D
+:10BE200059C8C6E8E79B61F09F1A63CC5725B2500A
+:10BE30007E58BE32C3989F3BCC58FFF64B8D79D7C6
+:10BE400078633E798AA1FDF91B18EB744246F2D85B
+:10BE500018A4D2D1DB6CA56318AB4D5E4EF9DEBBE6
+:10BE6000F4726F0CE6F3E418912533B6AD400C3450
+:10BE7000E532F644D5F2C3C320BF3659A43ED7BA43
+:10BE800066C6FBA0DE37F8F3A3FE69433563212BBA
+:10BE900063DBABFD946EAB6EA5B43E79F0767BB5FB
+:10BEA00076CF57DB58681463C16A99F2CF56BB2826
+:10BEB000BFAB5AA1F457D5F9F4BDBDDA43F927ABAE
+:10BEC0008B287DA2DA4BDFDBAAA7537E6B7529E5B1
+:10BED000B7549751BEB5DA47E9C3D50B28F5575784
+:10BEE00052BAA1BA8AEAB554AB94365537D0F7C0E6
+:10BEF000B860596941FF79D6CA00871428BFDA9320
+:10BF0000510AEB79FC6A56168C5A4FA07A1B6500D1
+:10BF1000DA44C6DCCCCF1C85F07B2B633B15C6EC2A
+:10BF20009D7ED50970BD74177CC37CC8AF3A209F35
+:10BF3000FF04CF6FD2C6A962CCCBB05D150BEC0469
+:10BF40007CD8143F9B0DE379B35576732C63376926
+:10BF5000E3E07784AF9AAB32C4EF098BB7544EC19C
+:10BF60007EF8F8313E9F00CB63692B588D05D28453
+:10BF70008A2E668771E21F0A796D900E6BE864BEA7
+:10BF800002C4AF586282799CF38B011374AD4C6587
+:10BF9000A208E337BB383D44AED3DDBB8D852640D8
+:10BFA000BDE42E3B8EBBAE6A663C8B020F3D1DDDB1
+:10BFB0002EF6D127FCBB2410C60FF06F9D7FF0F644
+:10BFC0006965C6F609DE88F605D01EE0102806FC75
+:10BFD00045A1B7F82263FB584F447BD7E0E3C7F491
+:10BFE000DEC8424903D3F3294B790DC25DCF8FECF4
+:10BFF000FD21D57FD729131E12AF5FED4238C3CF85
+:10C00000550867298B059A04CC7AD902C89BE1B7F9
+:10C010002699E76D90374990F7403D55F1B2B198B8
+:10C020007ABC2C0E532FE50F997D1BE589982FE5DF
+:10C03000DF651FD141E012E82203E58DD2E0CD8219
+:10C04000FC8FE1F7298CDD2C8F9EAE42FEBCD927F8
+:10C050005641FFCDD9626007E075A57B7C0CAEFB35
+:10C06000F196C1F9B416F974545FDEE4F43201FAC2
+:10C07000C9AC90C79BD8C0ED1EAA10A707A2F4BBFD
+:10C080005BA3DFFA8A99F2085C7507CA30C6AC4E2A
+:10C090001695DE60BDBB71BDE664BECE945B4B29D8
+:10C0A000CDDB35D9560AFC703E7670FC3546CCDFC8
+:10C0B0000E4306A3E1519B57DE1B2F91BC3C3F86EC
+:10C0C000D3D540FD366BF2AB3720B24EC4AF544AE5
+:10C0D000F235E5561FCB83F5AC4B17034E58CFBA5C
+:10C0E000AF6F69C8057E5237892407F4F9478E6B14
+:10C0F0002AE8124C50BEEEC042A6C0F8665729533B
+:10C100000B30AFCBEB20C3FE1DCE90175390980C95
+:10C11000D7EFA8F2A998B7B854E2E775E917EADBB8
+:10C12000102ECD7E91E4FBDA2C31C0044A9913E63F
+:10C13000736E35A37C4EFA838C24FD57309F49D013
+:10C140000FFE6E42783355C475E4325A471E3BCC1D
+:10C150004CD0CE3686799AA04A7C1E3B80EDD6A57F
+:10C160007F79C08AEBBB97794628D8D847F2080870
+:10C1700094A11C595B2953FDCCD6B1C417FABA7FE0
+:10C1800062F17D1ACE3716179767EBBE364595AF2D
+:10C190008735F9183300FEE21378F97973F05A9471
+:10C1A0009FCD90DF11859EEC5ABD47E5997FCA5718
+:10C1B000FAF8532F7FD7A910DFEAF9CC5E0BCD3BFD
+:10C1C000EFD69FC5E3BA06A287B51A9DF9E3B9FC7D
+:10C1D000CD9B7A8517E17E0EE68AFC1E597F51BC05
+:10C1E00042F3D0F392D328A72E7E7E12C9E3BC532C
+:10C1F000AB383F640F4EB7FA3CCF671BED04316F8D
+:10C20000818A7C5DAF007E15B417D63091EC02E6D2
+:10C21000615C45B138C83FB15A935FF95DF64B2078
+:10C220006F7BCBC410BFDBAA4A4415E09E932B055D
+:10C230004C00F7F82CBF97813DE2286002CE1FF03A
+:10C240003D322105E96012C1337B754810A1D31E30
+:10C25000947D29B4EC3AD7243E0EFE077C3F26019C
+:10C26000D6E9DD2570F9E0E2F2C10CD3B191FCAC66
+:10C27000624118CFF19689BE033F841E807C8C2CCE
+:10C280007A509EB678D6A4221F3A1218E9B505D77F
+:10C29000EE20B905F2D6B30556B4F46477EA32C895
+:10C2A000E7B9F87A74F8C414580CFA61C871A4801C
+:10C2B00017FB7508CCE3F70CA247BE6DBFB600B301
+:10C2C0007FA77E4191A4129F683FEDAA80E3E0BA68
+:10C2D000A15F2B7B99C639A78DC34C6F1C467E8905
+:10C2E000F981C44C51F865C0714CB70FAA37AA8EBA
+:10C2F0002DFC5347183DDF95109BDC3D1A7EB98C11
+:10C300005DF60D2A0E13103CCE03EC4E13AD9FAD1F
+:10C31000413CE7C8DCEE509CEAF00D50FEF86A0B99
+:10C32000C90FBDDFF3D50BFED401486C29E072BF05
+:10C33000E6436B09F6533F4E0C58A15D47CAB48CD7
+:10C340002EF8FEC4A62F73717EBA7D5AEB31F245EA
+:10C35000CE6A4E977ABE55E38B5A79707DB241EF23
+:10C36000AF65F07A0F6BF59E75786B918E81D20573
+:10C37000E4CFA2E3D36FC3F96E7FC0C64C51E4C2D1
+:10C38000B30E5F73C2C4FEF30C6F8FF43648FB5FCD
+:10C390000ED67ED2BBD3DF6583B77F342165E0F64E
+:10C3A000856F4EDF32C4FC1F8F3EBEBA1DDBE5B881
+:10C3B0002C0CF15B93BE96F0DBFC80C563057EEF31
+:10C3C0001833CD8578AB4BE0788BD2EFB383CD0BB0
+:10C3D000E05236C4BA5E18AABD30F8BA5E1D02AE8D
+:10C3E000478780CBA1C1DA035C5B8798FF1FA3CF8F
+:10C3F0005FCDC179E7645948CFD464035C518E2383
+:10C400005C597F7E88D2EF3B43C065287AFDF07B84
+:10C41000D2EBC9C1C6BF087AFDDBF7A4D7FF3B103A
+:10C42000BDE2BCBF07BD4A89DF8F5E9D8983C375AE
+:10C43000287A4D1EACFD45D06BD660F3BF087ACD8F
+:10C440008B36BE9539BC2ADA45055C9F2F281649E4
+:10C45000BF9BF3B91E761C7BCA8BEBAA037D955458
+:10C46000847AFBF8C34B0BFBF474A41E8AEC2F52A6
+:10C470008F2EFDDB93A4479D9ADED7E7635722FBFF
+:10C48000F99741EDBB6F3B6E8C8B85EC63FBDAA7B4
+:10C49000FBFEBBC733EAF9180F1F9FC1F85716A15F
+:10C4A0007EDDE541BA8C2FFABEE30E5E3FADECFBBC
+:10C4B000D9050B12C12E70F4D9059955BFDEFE5176
+:10C4C000525F3F999297C9403712BB8AEC3756C1E9
+:10C4D0003C3BB1B86ACFF68F26F4D903007F01FD4B
+:10C4E00023FA38A68AE0F68FC2E6D53B9769FBB4FB
+:10C4F0004ADA17E5C95362908ED7B50C6E2FBFA1EB
+:10C50000E9F1DF6B7EAAC39A9FEA10FAA920ED40F9
+:10C510003F15A407D14F05E521F45341FE55CD4FFA
+:10C52000F58AE6A7FA8DE6A77A58F393F9D14F4634
+:10C53000FEA880E68F6AD7FC51414A1BAAF753BA7E
+:10C54000B63A44F5DADB5E188EF0E85B07B7DBF34A
+:10C5500064DDBFC7D7C158298B86AF1B3C26C3FEFD
+:10C56000E2FA7C87016FD72A4986FC35AE4C43FD41
+:10C57000ABE5E186F22B6DA30DE5C56C8221FFA32F
+:10C58000DE2986FA57F49418F2977F7A9DA1FEE48B
+:10C59000AE9986FC65476F33D49FD8596E289F703B
+:10C5A0007891A17C5C68B921FF83FDF719EA8F09B6
+:10C5B000AE31948F6E6F3294A7953D18E167DA62C1
+:10C5C000A81F5FB423C28FF42B43B923FF7943FE26
+:10C5D00026D0F728FFECCA6F0CEDACAE8386FCBF0B
+:10C5E000C531DAFFD89D41AF378A3DF9553CDFAF01
+:10C5F00082DD5E4CF632C8B1A671D8BAD28FFBF19B
+:10C600004CF81DED63C0AEC08643EA31CA1D5385A8
+:10C61000C538FE10FC8C1E00ACEF861FE4C7AFF4DB
+:10C62000FD6CBB5DFD218E9FC7E5B02AABE47F8822
+:10C630006CAFFB8BF2DA67C563799D5C2247930789
+:10C64000272CBE93E1FA2172FF9BE78D655E1CAF3C
+:10C6500042F797717967E25558E6B16B0E0BE8FF28
+:10C660002A7B3501D7A3FB79D6697C5AAFF991AD06
+:10C67000EC72F2639CD3E43F334DF50C269F22E12C
+:10C68000F56DE5999814B9CF9911FA18C7AF9002D2
+:10C69000D1F4A49EEA722CEFAD3B07C58F0E5F1D4F
+:10C6A0008F2639E845BD6A532A59B9B33F9C4C5986
+:10C6B000400F71FFFC75E72619E5F839F64AB177A6
+:10C6C000D845ACB7EC0E5A878ECFC87AFA7EAB0548
+:10C6D000F14AF291CBDF5A0DBF6291770DC2370E4E
+:10C6E000F6D1B8FF133D21D6F51DFCC08EFC4443A6
+:10C6F0005E726618EA9B3D952C88FE5B1887113D9B
+:10C70000FA18FA73F11FFA4B4C3287F3C07C773971
+:10C71000F909CE45D82103F11F0EF1CDF0A1F9F5AD
+:10C72000BBF277C7DC54EAFFBE78A6F95F549EAA35
+:10C73000EC4DA49FF2228D8098F2D3F760DE0B0FB0
+:10C740009B49CEFCE8ABED871E03BE341559E526A8
+:10C75000F20CF90FFD16CAE77A6DA5985F786C8C1C
+:10C76000C50DE5473280085C585E1A8772E03413C5
+:10C77000A7A3DFEE347B336E42989CBB27C942F2FD
+:10C780008535988F77D9707895CEB1EEF2F3BCBE2F
+:10C79000AEF9ADC6FC3C3633558271E63D646601A8
+:10C7A00000D642261DEFD2E10074302789FBDFE777
+:10C7B000B3CAB5328C5B6FE6E7364B5E1C63413C17
+:10C7C0002C9C20E79AC6F5CDE3FE2491EA7F06F47F
+:10C7D000A658FBBE2F72062C28974FEC9DF093CBEA
+:10C7E00019F613589B81FECE04B04394FEF09DD3FE
+:10C7F000609CE750EB889C37BA41069B87D42E7823
+:10C80000A3F9D51B9304031E6B6DBFD8DE05F3F4AB
+:10C81000D64ACCFE43C84BFC5C493D161BD889F276
+:10C82000BBA4F2A92E8083BAC62AD742BAD9F18B0B
+:10C83000E7B07E15200CFDB9CF2729348FF376772A
+:10C8400000CF1940DF5C3633F6FBF7FBE23FA9DF90
+:10C8500057B0DF94FEFD2EB17559D09FB84CAA9CFD
+:10C860002E88E857E4F5AC669F3713FD89FBC78532
+:10C87000321543BD868BAC7758187651F5A68B835D
+:10C88000F47746936FBFDBF5B805E5D6E95F7D78B1
+:10C8900023EE8716BF6C6236A87766572C0B91BDC6
+:10C8A00017B0A0DDBA68AFC91BA07C68D22DB1E17A
+:10C8B0007C5D4BFD2F7E2E96F6538B9EB706664011
+:10C8C000FB452F9C18CB401E9C59D3732813E1F7CE
+:10C8D0002B81EC67A6768DBD05BE2F92D89DD1CE5B
+:10C8E0003DFF9AC4ED8E532F39CA90DE84F603774C
+:10C8F00050BFC19F9AAD617AEC489299F009F5C892
+:10C90000DFAD3E2D0446087C7E378F099F5F0DAF5B
+:10C91000F734F7E72EDA6F0ED8717EED6D161FD45F
+:10C920005BD6FE37A2EF2B9FDB1D877058B6DF6802
+:10C93000AF2E7EEEEBB55300CF8B4DAC6706E9F121
+:10C94000AF287FCE6BEB31911CF2C60920B79692CF
+:10C95000C8827ABFFE64DA7B50FE99CBC4EC200A11
+:10C960003EEBFCD8F232E67DCE4AF4682FDB6FE472
+:10C97000C365ED272C382F59643D59C0E83FFC2290
+:10C980008C2F59FFFAB00FB6A09C5D166CFC9B096A
+:10C99000E86DD9DED3EF22DD2D8BE0E7CFF097F401
+:10C9A000FEFAD29A1CA92FDF9884FE72D60E9B9FA6
+:10C9B000C903EB4B9DBF17EF3EB74D85F14F3DFFD0
+:10C9C000F93615505EF15F7FDF763FEE8F5EB5CBB7
+:10C9D000289796FDEA3FE25818FC872573F970E620
+:10C9E000E9A79EDC027038F38E95A076E6B79FB873
+:10C9F0001580FB993DFF3715CF9D56FCF6EA34A410
+:10CA0000B315FBAE4C1B6C5F84741BB086E33740E0
+:10CA1000F855F6C33869907D454B23F0726ACF799B
+:10CA20000B9E0B7D29B01E94BF4B835F5BD03E3BBA
+:10CA3000E4653D08A7D7F69E38741FE44F039EAC0B
+:10CA400051F004EBCF1449AF843251BF2CDD7BCBC6
+:10CA50004D5714626AF6288827D643F2BE1F7EDF40
+:10CA600002FC16F6E137B2FC1CFBCA82F05FB60B83
+:10CA7000F03916F10AF81CDB1F9FA7F197C9FDF1E9
+:10CA8000599C6CB4FBCEB18AED5BB0706F12E17F44
+:10CA9000207C2ED9F7E341ED2C5D3E0C05E7050225
+:10CAA0009F576CB2F7E664E4DBE71DAA8BE33930ED
+:10CAB00003CACEEC3EE76640279F9A7BEE4038F4EF
+:10CAC000FCD62AEF80EF8B7EFB36F1DD997D7FB6B9
+:10CAD00020FEE1274E98047976E1E74D06F9A5DCC2
+:10CAE00006674B58CFB4770B31653DAA87F047F9FD
+:10CAF00043C087848FC0CDD31594BF81145AF7D219
+:10CB000000E78FA58103B70A63FBC3BD3959D4F58C
+:10CB1000D605BC0A4588CF0FA721FD0D844F7DFDAA
+:10CB200032AEFF32287FC2C8BF91F59702BFE2FE46
+:10CB3000A81F7E0307FE88E99936AB24802D740672
+:10CB4000ED04677FBCF7C19FEBE76F6B1FD747F022
+:10CB5000BBDE5E87D350FC3ED4FABE2DFCEE4956B8
+:10CB60000C74A4C3F1D457D1F5411BCA8F8908C7EF
+:10CB7000CAE919C3FBEB33132B553385BEF9AE0D50
+:10CB80009A48CE9F6A07BB5CE82F2F96E2396E94D5
+:10CB9000719ED3E4D4D2FD07C6A25C3B75F0258D0F
+:10CBA0002E39DD2FDDF5A145D5F443205C3E0F7015
+:10CBB0002EFC9236EF65AF44EF6FD9AEBF45EDEF77
+:10CBC00033C9FB539CFF679D66A642179F054D51D5
+:10CBD000E3191E4FE6FAEFC2BA63271D8DC77D41E8
+:10CBE0005C8C82EBAE5DE37D1BCF45D537CD74FE0B
+:10CBF000CF24CFA75628AF8D8D51D08F571B378F9D
+:10CC000029617ABC2E024E92AB94CEEFA4E4D242BC
+:10CC1000BEA70B18CE7FCD4010E1F306BD9B857AF1
+:10CC2000E983719F98719D7F8DB023FF2AB1B5690B
+:10CC3000D0DF5F55C153A344DB1F18FBF7AD36317E
+:10CC400025ACFFA5D69E0F703EEC5FED0CED32D308
+:10CC5000AB7601E5C9B26D66DA7F2D836D15C2ED45
+:10CC600093C7EC0115F29B7F5D7D07EAA5FFDC66AB
+:10CC700065781EF1DABE95DDAB502E3D2A30F4A367
+:10CC8000FFE74BD55FA25E5EB8155607F264BEA300
+:10CC9000E7496C3FFFB94C560BED3F178293703359
+:10CCA000DB9D129A84FB90EEDDE91E95FA797129DD
+:10CCB000F67BE63907F57BE65FDFA671CEFC6B2CD1
+:10CCC000E9357DFE606F2BE17A1CEC6DE5021F906B
+:10CCD000BD1D96877116639ED717BED1641ECABF4D
+:10CCE000C59802DD2FDE1FEF45FF4A583DEA6799E0
+:10CCF000B5E7E71EDA7FAB1922ED9D4219C88F8B8D
+:10CD0000DB8DE37FA3C9BB65969E79BCBE3F83F3F1
+:10CD10006D27B573A668F4AA9547B6D7EBC7A40CE0
+:10CD20008BE887B75F6A6595D1F8204DEB7771FB8B
+:10CD3000D7A38CFD71BAED3F0EFF7EAFC0E340D8A4
+:10CD40001E3BC5A35558422313816F5FB0B005C881
+:10CD5000BF1571A1910930DECB9ADCAC88813C7C97
+:10CD6000CFD0E681F531CF6C5D6710AF4B5EB4D3A9
+:10CD700079CA9217DEFE12F1790A610C183B95D23E
+:10CD8000F9E5FD4007A71E333115ECB525D690FB1C
+:10CD900051D4537BAC6C07F2F7ABAF93DE3AFDBCDA
+:10CDA000551CEC9C7A4910A8C1D67F1D6A09CBAFEF
+:10CDB00074621C8E576CC37DC36153A006C6AE92CD
+:10CDC000BC6B9EC3F51D36D33EE3EC5C968FFBCA6D
+:10CDD000B32CC3A312FE95B725285FF97BB3102DA2
+:10CDE0003EC9DC0B427D02F041EFF54C8154EA1D57
+:10CDF0004EE94A4BE52894BB26191657407E02B2ED
+:10CE0000DBCDC91E361FD29589CC87F063CEEB2EC1
+:10CE1000F0D79F00A5CB1F51D2B0DD8F52CC34EF9D
+:10CE200045A9DEEB53483F3A65B22F343A55F7F146
+:10CE3000799E17623C35189FD37BDF9D08DFE51F85
+:10CE40000A4A783C43643C6895A4BCAD14D27A4944
+:10CE50001EE5C9310CE17A563B773F3B57894F08B5
+:10CE600093CBCDD532C98FC66A17A5EBAAF39942E9
+:10CE7000FE350FE54DDAFAAD052AC507214FE38FE0
+:10CE8000D559EA453B0FE784714126A78FE8C8EAE8
+:10CE9000AA24DF94CDC9681F6B72AA6C3EA46627D2
+:10CEA000878FC9594AF0B16879A97506C113DAD3D9
+:10CEB000F7AB537D77233C6C59971AE4922579BCE4
+:10CEC00021DF0F5E3AFE77FF4FC18D119C1AAB6DCB
+:10CED00094AEAB2E2278D5577B29FFBF00B7D694EE
+:10CEE0008908B7294CB185C3ADC4901F106E8F005F
+:10CEF000DF2487F30DC011F986C5787646597F6423
+:10CF00008AF11028A81FAC6EA554FF9E3880DE3E23
+:10CF10009F2268F1B0BE1A338E23737F0B4B565994
+:10CF2000D6A43EFF2673A94CC13CF22AE2E5680C68
+:10CF3000C16EF9FB76F21B9B64A93B5CAE2DBF4131
+:10CF40004943F965AA7A9C9D088B4733CD28B52BB8
+:10CF500004570F9D53D66A7AB3FE02FE8C7CD05CD8
+:10CF6000AD50BA5EE3878D1A3F6C423C631C8987E3
+:10CF70009F6BB64C67A417FF0FE4F93E3EC4C2E3B3
+:10CF800046123CC19019F04D3252A13444F1BF47D2
+:10CF9000AD8111B9143FE545FA4838BA8AFCC78C0F
+:10CFA000055DE84F4BD0E0C65E1996302B9696672C
+:10CFB000E67A879978EA37A33D1E09D75ACF411BF5
+:10CFC000EEAF079A4FF1070B051CEFFC2C42134BF9
+:10CFD000BE3D78B41CCF4F5B1CA457533D9539E838
+:10CFE000DF63C7AC449F4E8F4F981F86BFD401ECC0
+:10CFF000BA55A9D77E8C7CDB8DB20CE8F0C1D6E1A6
+:10D00000768473B339E84279D79CC0F587520650CD
+:10D01000B8ACAFDD9F3439185768E4775DBECA53AA
+:10D02000C71BE85797AB895719E95C97AB2FA570D9
+:10D030007B6D516AE9799C4F52EF56E2C348BACFF3
+:10D0400093A794F992510F304F13DA6B6833A21DF6
+:10D05000F7A110E0F4CEFD5367BB7277A09D03BB30
+:10D0600002922B2AF203E1A9E7B56F9231DE95CB4C
+:10D070008735B699365C6F03D0111B85FE6C850031
+:10D08000BC01E887D179A047E38F224A75FA74A7DB
+:10D09000E61AE2044D798744C4573DD811144F0C69
+:10D0A000FB3B278C271D986C437B4F327B0EA39C48
+:10D0B000EA891583A837EB9D336D5EF4DF241412E3
+:10D0C000DEBF8C2DCF192C6E09EC16F2DBCA4E0F89
+:10D0D0003B8EE330467E5B933C9EE13E71B7B333BB
+:10D0E00006F72DB1A9A2615E8B527DC353C3F263D3
+:10D0F00070740D5FD8ED6EAD9FC8F17E90AAF92DCA
+:10D10000B354E60D3BB7A8D2E95B51D95561FCBDDC
+:10D1100066C434867117917C3DA0DCDAF9FDE456D3
+:10D120006D4E80F0658E9417C920C79D94AAA28C7D
+:10D13000F3569AFF2581E8EA4A840373EEB86087C4
+:10D14000FC685814FA3A7A691AC56B5ED033B06B32
+:10D150002E203DB3B988DB239A9EE1FAE96C8B83DC
+:10D16000F4D3D9B995144775B6254D41BA3BB0E112
+:10D17000F2B1088F79BD8D4C81F9CDEF9D4CE982DC
+:10D18000D65F525ADEDA0644CE58CDFAF91B664114
+:10D19000BB138F98282EA83B30E14C15E4BB5BAC49
+:10D1A0000CE38EBBB7DE93837EF16E1807EDABEE1A
+:10D1B000AD2388BEBA016E946F30D6C7786113E094
+:10D1C000A59C313D68D38BF5E7BD6E6A8B662795CC
+:10D1D0006FB47AA39DEF5C286F8D6EB7D5E2AFE98F
+:10D1E000F85FE5288457F107AB7270BD3AFFAF4C8A
+:10D1F000047984F0FAC0CAA2F9E3AF4EBDBA227531
+:10D2000022A6DE159832676254FF5A1FFDF3714F54
+:10D210008860DF125E7C71371BFCACDC8F7942B317
+:10D220007F996D80F238ADBD1CBD7C49CBE7871E70
+:10D2300060787FA1B214895EDF4F9B18ECA705DCF4
+:10D24000FFDE4CF1D0FA7CC04E253A66800F942F59
+:10D2500073357F0FC0FD260B7C3FF1BA4940FAE8D9
+:10D26000A3275F1CDA2D42F30D6B7643F9DF0FF332
+:10D27000FDD9C2DE4D24EF84E6319B27C3F77B5EE8
+:10D2800037939CAF69BA7CE3ED80DF2FDE30517EAF
+:10D2900041AF9DEA9D7CC0B3F976A8D7F30733D997
+:10D2A000E15F1CBE9AE21E4F9A8D7E82A9699C8F17
+:10D2B0005FD2F8795E6F33D91F7AF9BC863916854B
+:10D2C000E874037D9F878736785F8195FD7B711EAB
+:10D2D0009EE730BAAFF0D2C3B75EBF86F4DA78B259
+:10D2E000F7E7AFB77AA2C54FBF94AA18E4CFFCAE58
+:10D2F00016EA97815D949CAAF5172647E6F7261152
+:10D300001F30596518673C4F932717E6B7D56C90C7
+:10D310002727EDD1FD20AFA7F27DD4BCDECB89BF9E
+:10D32000FAAFEF87F47D9E3E6E17E7C7BEF56C9EA1
+:10D330001C6D3D7DEB984AF54F26441FBF471BBF30
+:10D34000BB7A01F3825C2AB7423D278E7FCFDAA2F7
+:10D35000425C4742A210B6AEF9AD8B99376C5DF3D3
+:10D36000B7CEB69487F5DB8787E5FF5E2CF5E1A1A4
+:10D37000277509E161556AE931E49BF2E62BC62283
+:10D380003DCE6F6D24389F307BDC285F3F69BD2721
+:10D39000CE17759E8AC18F30BF55C30FD8BB85612C
+:10D3A000F8D1F112D9BEFBFDF95F3E80F2E7116EB4
+:10D3B000DC0C04AF7E78CB8D0EB7188D3EBB41DF01
+:10D3C000FA086ECA0B4791AED73B3C48D703C36FF0
+:10D3D00034F30D06BF01EC57B0774C69785F017DDF
+:10D3E000B4780ED9CAE96028B8F58DABD14171F493
+:10D3F000F514A5E97450C55460D8E396A1E8E07E21
+:10D40000A6DA0659C7053A78D84007459BD7131DB9
+:10D410007C8AF6CAA8FEF83F6E51E3A6E0B94F93A6
+:10D4200089CE958EC7A8A9B7F1FC3894C7C7E3FC8D
+:10D4300037E2398D9E5FB87344DCECB0713F690010
+:10D440003844815F51DA00F493A7B28249FF3CFA75
+:10D4500039618E7EBFEFEAD4E2A969A83FFCD1FD15
+:10D46000B57AAACB6B53BCF3C23E13F5E771E7B0B4
+:10D470002F0350DA9CEA9B8E745197F0F33B511EB8
+:10D480001C3F2E90BEAD797FE528D46B917602ECDF
+:10D490003F1BF0DC73A529D64F76A854B99DCE4129
+:10D4A0005589ED2CC47D4AE5968F46A0DFB08A529F
+:10D4B000A6D9A12B4D977A9AC82F5BF9149E930297
+:10D4C00091C8585F6295746E0A82B014F39B1DFC7C
+:10D4D000DCB54AB2C9D6B0B884E51ABFD45797FEB6
+:10D4E000F223F443DB5426A7627B2E3725C6EDAF2B
+:10D4F0007FE03CC3F4BDC5EC933DB80F155829F24D
+:10D500008559F2D1FD27B32B799C1A8687CA347EC0
+:10D51000DE6EEFE868C885F6F6BBFE20A31EB4C237
+:10D5200038E867B3654967C3FDD5E6E420DD6F627F
+:10D530007961DFC1AE721640DEE00780F90E621736
+:10D54000BE2C785C5F223DD67078142188207D67E0
+:10D55000EEF03694CB45529D09E38E66DD3582F2BE
+:10D560009BE77C33B22B0A3DCC7A655D27DA33B377
+:10D570005E499F83E707B39C233FC614B60BB618DA
+:10D5800068FF9AC0824D905E657B9CE2195FD3FC78
+:10D59000631D980FD38B1D1ABD819D337D0FA4B3DE
+:10D5A0006C7EF3DD057DFEB4C871376B7CDF610EE8
+:10D5B000A65C8A7400E3E03A7EF64AE0C7A0FAD996
+:10D5C000EDC1C00D63003F77B01E33C2D1C7643ACE
+:10D5D000F7D0FDBAE5CCA3E519ED4FDFAB30EF4056
+:10D5E0003A89ECEFF610EFEF671DD01FA4771CEE21
+:10D5F000F93754CBBEA03CCDC1C2FADBEF39E460B1
+:10D60000FDFB8B84B347B299D430B8028AC470B89A
+:10D61000F7836F7CD9756CECC07CD6076F3E8F4862
+:10D620007C7C8145C0A76D69DE5F23BFA969DEBD33
+:10D63000C8BF15B61EB70474732CD9B71FBF2F35DA
+:10D64000F97252011EA7B37DA352102E9DD1CF5F58
+:10D6500023F93BAFECF463C83777D4480CF1BC76C0
+:10D66000DF278F215F9E36031FC17EE0B5559FC423
+:10D6700022DD2C01060C97271F548D20FBE9ECDEE0
+:10D680005183DE1FF940F397746A7CA2AFF34E64B6
+:10D690004018EFCEBD0EDACFDC5965BAB0CF427A72
+:10D6A000BFB38AC78730A973ECAD06BBB36EC07E2B
+:10D6B000701F11D94F77B56F3BF1BDE49B8476F7AE
+:10D6C00089EA05DB51BE44CE73A4CB77228DF4DB0F
+:10D6D0006C43BCEDDC9685DBC3F950AF5F3B807CCF
+:10D6E000F58CD2CE016D7C3CA6FCA0D83989EE6BBE
+:10D6F000D28F3D64FB5008A387A1C6637957792F69
+:10D70000C805DC7FF944E64CEDDF5F643DBD7F5723
+:10D71000D595ECC4045C9FF7FFA5A50C3D7F8B8BD2
+:10D72000CFDFAEB5D3BFDB7D7E8676A1FDAB78B211
+:10D73000133CA3B8FFE11F9A5DC09CB05E6430FF4C
+:10D7400066EFFFC67A61608A17B66FB5468D2BCA41
+:10D7500074491C2FC143C5B628F3EBD75F48621745
+:10D7600053CF338AAF1FDD64E4EF1A1943FB9AF2FB
+:10D77000AA5ADA673782FC407D10399FE34D8F2A21
+:10D78000A807EC16BF827ED1C691A9B96BA01D482F
+:10D7900035F2FBD863FC8A14FE5DF307D9D7F81580
+:10D7A000DCDF368EC8A0EF7A7F8D0297B33A5F3404
+:10D7B000C2BEEF79F28B795C3331AEF4ADC0F45870
+:10D7C00068B7632D0B99DC8C1D74678CC67DAEBF6A
+:10D7D000DE42E77B8DF962FA5CC8C765DBC83FD6DD
+:10D7E00096109A85F76B554122FDEA4F50AE8D4554
+:10D7F000FFEE9AB44E947F07EFB6D07A9B27F3FBE7
+:10D800006AD6291FF9AFC4FE57300FEAD51DBDBF38
+:10D810006EC57702D4A3B09F45BF21760AF268C7D0
+:10D82000F4B376DCCFB930AE0EF0B1D51CA4796D6F
+:10D83000A9B152BF5BDA2C65D1F0F779BA44EB0A93
+:10D84000085D141F9CC4827684EB83D3676ECE83FD
+:10D8500076B9794CC6FD7C73C1596DBFE935F1F3DA
+:10D8600028DD8FC8ECDA79964D3BA7B285C7173E05
+:10D87000EADF4BFE43C78C204FA78BE47F8E9CC70B
+:10D880000A17A77BC7D4CEE9A8271C852213D0BFCF
+:10D8900099C7045C973C7D075DD2C8CD6703B43758
+:10D8A000517BD90BED0B797BF409C917D9BEC2C5E1
+:10D8B000E30CD7A31F0ACA03668F702DCC23708395
+:10D8C0002CA84A5FBD7A17D7AFDBA1FF10C9D100E2
+:10D8D000ADCB9D1F0C21BDB92B44C2D3FAA2E3747A
+:10D8E0002EF060A1EE47F5D03CB6D61C3980F6D7B5
+:10D8F000D67B19D9495B518642BBAD37B0003F4F4B
+:10D90000621928DFB62CB45C4FE7F905007F81D29D
+:10D91000A8F39E9D6E237CBB573F18C2FBFB311EB4
+:10D9200020D45C4AA3D66F4CE770DA620EA4A37FC2
+:10D930006420BA287371BFAABB4AB3AB98DF85785D
+:10D94000DDA0C187DD3A9EFB1724AF121EC7D5A705
+:10D950004FB81F03D64771AD497516D247E28CD038
+:10D960002C5C5762BE855D938BFCC5E1A68E117958
+:10D97000DC190BB4227FB65D924AF1A4EBC4800B94
+:10D98000FDCD6A8985CE930F1689B3F05D848D75C0
+:10D9900016F243409EF8C5EF1DD686FCE6985A5213
+:10D9A000B6A010DFB9B0C808DFDA02D98E745CEB1C
+:10D9B000156501F21B4AF5FB118CDE37186732D969
+:10D9C000F3A17C7BBA883E5AB65D1088DFEBBD259B
+:10D9D000FEE1F0BD5E4E16C2FD002FBBB8DD7B77C9
+:10D9E0004EE9CB2E4803DE07FDC3158E4B6912E3CB
+:10D9F000572CE02796851660CC4D5BFD934771BD93
+:10DA0000EBC7D9E8FE6CF60A7F19CE37F6128B8287
+:10DA100078DDD19B349AD6576751909F3709816B37
+:10DA200091EFB7DE7D4845BFBAFD6327C60E336769
+:10DA3000D7DFAA317ECC59688938C76222CA717D86
+:10DA40005CE75B21A2A72EC1F79758F2FF1434E5DB
+:10DA500027533CF32484E78629EFE6CF8B4217D087
+:10DA6000DE993A1EED653134692CCA29AEC7982477
+:10DA7000A787E3775376C63BE867DA560CF3C7F11E
+:10DA8000AABA6FA779798FDC8F7695F3D8C9AFA33F
+:10DA9000CFF34DD223B1C71C21712CA64B66907DCC
+:10DAA000165E0FE4FEC61CEFC72EA09BDD355CEEB4
+:10DAB000B7DCC5E83D0AFCC90F836F4B014869FE1E
+:10DAC000048D42F50A64F2A3AF13956008E139D6DC
+:10DAD00046F494C67C24D722D7EB38D67837C61DB7
+:10DAE000393CC679F66AFC8D3F522A9D57A025CA5B
+:10DAF0002CE973ED28FFF68C57D271BFFD6042749C
+:10DB00003DFF5E3A6FBF5B886E9F9F4BB7737D0989
+:10DB1000B232348950C528AE0FF2622A9DDB909351
+:10DB2000DB2A72B9C0AE63A4F7E2C675D93D61E3E2
+:10DB3000ED49EF9B27C61FC46BED98DC13AA81F556
+:10DB4000B701D5E27DEEB86C0E47A7DA0747AC2FD8
+:10DB50006BEB023EA81955884094A93E2BB5D0B96D
+:10DB6000084843F51BB10F0EB15AFD2D459280EFC9
+:10DB7000900C036008503F61BAC5708E22D71D51CA
+:10DB8000B1FC7E1353128BFAC67F6C1C0BAC81F177
+:10DB9000E3BD4678C7AE786125DAE591748033B885
+:10DBA000D02F868ACF35B64BBDBD1F1F103C699E56
+:10DBB000009A96B7D80E0B00A5A55DD2E36349FE87
+:10DBC0004E3475AAE80FC580A47D30FF4B9F7ECBF5
+:10DBD000BB0BF22D3ECE67B1F92FAC44BA4CC8E076
+:10DBE000787A077DCB00E74799FC778CDB51AB4413
+:10DBF00005F1B12D348CF47823934A114F8D95475C
+:10DC00004494EBCD7B99471090FEFFCB1A3EBFDBCF
+:10DC1000D2F9390D9314927F929BDF1B6D2E101D4C
+:10DC2000285F0FDEFD02E9BDC70E880CF9BFE4775F
+:10DC3000C71EC1F7815ADEB152BEE5F54A921B3FBD
+:10DC400087766A14FFF9507A39B27EDE921D029E01
+:10DC50004FE42C08BE3E12E5B35FF25C83F858D067
+:10DC600049EF872885FC9CCD392344EF8728A8D528
+:10DC7000C02655FC5ADAC2CBD9AD89B48F1A63EDF0
+:10DC80006AB80EE6F7E8D312437D69B206D3E743DC
+:10DC9000BFA6179DA809FAED8F1E9D114A47391E90
+:10DCA000534961D0FDE677229DCB59F70CE5F72368
+:10DCB000A1DF84A91C96767FDA0194976833E3BDCF
+:10DCC0000A87CAF5DC0629E0C538EF0D2B7C161C47
+:10DCD0009F69FB97C625E54F229C4F6A7A8F552E88
+:10DCE000A0774CDC1ABF38AA5871B47D56AB2B868E
+:10DCF000C7B73C201E40FE707B19E90FB92A181ADD
+:10DD0000A5E9659CB8BCFAF946D42FCE0A91D6B1E4
+:10DD100041EAACC1772536AC60728DD2BFBFEFDA75
+:10DD2000BE2ADD4AF36F451CA7F4AD835C7220DF89
+:10DD3000DC0BA2AFE3611C7762DF3A62F475E47733
+:10DD4000515E9FC7766FF0A2E6B1595BC7A6749982
+:10DD5000524701681A677F79BFC6F101BD2B1300D6
+:10DD60005BDD44F7D182D7615E794E64FCBE96914B
+:10DD7000BFFBE535BA8AFCAEB0B0717291EE389E49
+:10DD800081EE34FB09F8CE86224054BE213F869FA7
+:10DD9000D61F498FFF74B9183E6FE83FB68109144A
+:10DDA0001757C19492F4FE72916972D1C6D410CA09
+:10DDB000BFFF69B9087290E4620BAC3409762AB1EE
+:10DDC0001D4D77A31ED7E5E144C4C914645FDB0D84
+:10DDD000254EDA1751FEB247FED082F191EB44EDA9
+:10DDE000BC4B830BBAA1102E5FBB14833E7D187F02
+:10DDF0008175ECE948BCBE00C6DB5C366C1CEE2FBE
+:10DE0000ECFE17C93E7017F0F81577153F3F77E421
+:10DE1000CD7B32FC5E5C653AB7D32B75FAABF2BBB7
+:10DE2000709C0DD82FCAE73C0BE9CB475990EB43C8
+:10DE3000CD3EDDE6D2FC241A5D45F249A47C9AF081
+:10DE400087E41294EFE98255C6FD1CEAE783A946F0
+:10DE50007D8DF4A2EBEBD6CE3509E80FCBD5FCFDDA
+:10DE6000B936639CC365195C9E99D3F93CD68995F4
+:10DE7000B4DF544B44DAC7E9F477418F47C031121D
+:10DE80007E48A86B27517C0CE5E38A7B18F2EF36BD
+:10DE900020597CE32D2E5DD1E2A6658273DBCFC4D1
+:10DEA000F1282FF77494DBD1BF2EB86DD7E2FE7046
+:10DEB000A3C04228373716BF4971254D55D0332CA2
+:10DEC000CA992FCEB68CED8F67E063DAAF3A546B08
+:10DED00027FAB582A11D14B7D01438348B713B9644
+:10DEE000615C4A53FE9A8C4528DFF34B0B11BF6DE2
+:10DEF000F5168A9B91F359543FC2E7B88F213AF93E
+:10DF0000767ACCA1EF2F2BA2EF2B4B33F8FE3628DD
+:10DF100081A882F964E58B1EE4FFAC3A4BD4795CAE
+:10DF2000A9E1293383DF0F6BAB3F944EEF668995F0
+:10DF3000013618BE60FA6B52C3F03179007CB874B8
+:10DF40007C483A3E1266131F76758A5CDE925EDB71
+:10DF5000C0E4DB503FAA9516B2631BCD7C5FBEA325
+:10DF600040E30BD9D686C4F66DE93A6E8948F7705E
+:10DF7000B28B44DA273A2A9EA7B8A64759CFEB2896
+:10DF8000EFD4027E7F3EB2FD1D19DC7F159414C1D3
+:10DF900043FB698E47C02BCD67EB88D4B6703E6DCE
+:10DFA000D5ECE8561787E3D6FA87894F2F769EBAC5
+:10DFB000DCAED5ECE8855E9F05D5812A944E4B47B3
+:10DFC000FDF9047F878A999C64977F8A4DC2FCB2D1
+:10DFD000ABB27C951961E743B2B752C47A57E3BB41
+:10DFE00042D0FE9320BF0FFA49F0D7C5F40E978FA9
+:10DFF00011332F649D023139C8D09D907749412A51
+:10E00000772D80B924D0ED48CADB6CA0176142A7F8
+:10E01000ABF9FD8B6E7C5F92DE9FE4EF4B7EAEBD75
+:10E020002739A6755DC9A3389E22F950667C86EF14
+:10E030004BE2FDE7A277292EFA14C8DAA6048C87F2
+:10E04000E1F7B7E5FB982C4EC6FCFA128C7BBEE7D5
+:10E0500055AB764FB2730DDE7B795C8475439B665E
+:10E0600009F4FD702C6A102AC3E878F7159D7178C1
+:10E07000CE773A78CBA0FE63BC3F48F3CDE078DAA8
+:10E08000E4584AF7CBE639436E6C7F60CF534F6E4E
+:10E0900081F13EDF67A3F74C363B96BAB1FCF347FC
+:10E0A000DE76A3BE38BDEF6D4BB4F3C92552701AAE
+:10E0B000DE23AB50E3D91A987F7170B685E24F76B4
+:10E0C0001DA0FB694B649F05FBAF68DD43F9AB7690
+:10E0D000FDD98DE5EF67703D713ADDE746BF445EDF
+:10E0E000AB352482FED93DCCBF28EA397B86A8CD4A
+:10E0F000FB55EA7FB3E3D5438897D38F58C9EF76B2
+:10E10000E091DF51BFA7F6BD48F3FD7CF7DB77A0B8
+:10E110003D5DC19807E5F969BBE6D7B375C685EFE4
+:10E120006F5FD5E0A1E74FC76AFBE0AC21EA69E782
+:10E1300031CC09F0A7FB039D7178BFF073B3CF8298
+:10E14000F0588CF080B418E080727F7150A0792E66
+:10E150006E6DA3FB568BF772FFE0628017C1A5F5C9
+:10E1600000CDFF5806971BA7F6FDC54DEF52ECB545
+:10E17000D2FE595FF762A7CF8DF0D1D70B70E0EBDD
+:10E18000DE7D71789AA7E3A9F5CF34AF8ABD7C5EB6
+:10E1900015BBF83CE6ED053C39114FB309FFA7F676
+:10E1A0003105EFC174EF79FB33B4674EEFB32968E3
+:10E1B00057E8F3CA02711B371EF988EB63B6572084
+:10E1C0007DCCA44E3ACF5922CB32BE4F70A13C60D9
+:10E1D000097079DA599209E5CF3C24D2FB964C0EAE
+:10E1E0005E8AFED53319FAF946A71BFD62BBAFF074
+:10E1F000137D9E8CD5E02D75BA317E6673A6EF4CEB
+:10E2000038BF9FFEF0C54B71DD2B4D95BFCBC6715E
+:10E210009EE2F1A1E78755FEF5019AF770C3796395
+:10E22000640A708BC3F3EF7C91F9E85EF2DED7628B
+:10E23000C2CFA14D99DCEFB6D9F101DD473C8DEF9E
+:10E240003CD27C8214A735D25BEEC673BE93CCE978
+:10E25000C373D9CF9F788DE26DBAD375FF5327D59D
+:10E260003BB5F7B5444CCBB5787816B885E418C003
+:10E27000B1C1363E9A7CD4EE1705F8BDB133020821
+:10E280004CD4138FE970AEB4CC349CEB70399AB592
+:10E2900035B783FC2D81E8F7CD22E56FDE4393E9A6
+:10E2A0005CF91C8B7EAECCB438B995A6188ABFD960
+:10E2B000ECF805DDBFAD52AD32DE5F39AEC9C58FBA
+:10E2C000B4F716CEC7C4A922D0CD4B99BEE199139D
+:10E2D000FBDFC32D6F5EE246F896E3B9076D6A7601
+:10E2E000DC807189140F3A85B46D88E067D6CB5B0A
+:10E2F000797902CF4FC9DCB31EDFC344F8723BF516
+:10E30000495E9ECBCB7FA295CFCF281D9F49FA8532
+:10E31000D13B4560912574DBB80A8F068F3EB84823
+:10E32000AC5BB7ABA1F2C24CC6E336324AA7E27A85
+:10E33000A058E07CFFFDFA03BCABB6C4FF867E6C40
+:10E34000FF5DFD04492F893E7CE30ABE79B8FE7B60
+:10E35000BC84C94D09DFBFFFEFDA7EA5C92B9E44FF
+:10E360003A8C1789EE75BEEE7E64D438DCFF5B1AFA
+:10E37000EE0EA1DAEC8E2DB1A4C3F7730A3F3FB9BC
+:10E38000EBA14D86F755F534F21D5BFD1CCF32DC59
+:10E39000783EDB92C9E5514B669FFF0DCFE546E223
+:10E3A0002F0ACFB7A452280CB7D359A588F187F903
+:10E3B0001D367AC7F712068202E63F9A8544D4DFFB
+:10E3C000635817E57F802080FC38A698303F81F5A0
+:10E3D000B8A5E178FE1C5A8B76DAB1645F13D2D906
+:10E3E000978F747E2040F9CF337CBFE982EFEB3307
+:10E3F000F93EC8096621D2B38C29D0A1E898E18AF8
+:10E4000026F72FC053964E859FB7DD2C791F223AF1
+:10E41000665972B7A30FCEBA3C58A4BDBBA4B7FFD0
+:10E42000ECE9A786D17B437DEF850F7A1F785ED517
+:10E43000C2879E983048B9266777D7046E0BD7F706
+:10E44000ED1A9C9FC9D4F5805FD70764C7FDEA66C3
+:10E450006E3FEDBEC2BBE67194B7AD26DA4F9F6C3E
+:10E46000FD0BBDFB78AE94915D37D0B82723F07ECD
+:10E4700072E75319FCBC2360D0EF0B9F7CE9D2F00C
+:10E48000784B00B3923C89BFC341783FE451AD263D
+:10E49000A4D252F2C75858258F53C1F90EC777B886
+:10E4A00082943A5927A571AC875299C9E49F4E646A
+:10E4B0001E4A935929A5A9AC52E0F69D9FD20C168D
+:10E4C000A4340BED53F4F7B01E4A15BCF11916BF76
+:10E4D000310C4F4C87E37BBCA5FC7B447C9084785B
+:10E4E0009C10459E47C40549ED5524CF312E684404
+:10E4F00072FFF71474F9BD39B3E43D94A72F657A20
+:10E500008F617AF8D9DFF3FB15EB05B2AF4FD8670F
+:10E51000581440DD33895E7A07441559E94ED0EF2F
+:10E520007375FF3FFEE871C208CC16F3A9F0F81D21
+:10E530006673E6E379F11CADEA1CED1C648EE60718
+:10E54000C1F7CDF83D3D0FDDB79FA39D3FCC89F0CE
+:10E55000BF30BFD5E04751F11758C71CBF40E70691
+:10E56000736266BCDAC506A693B0FEE8DE5F798406
+:10E570001F6A487F56447E6E647B9BC06CA9F89DE1
+:10E58000D3D3333F54C8AED3FD5940700AB56BB0F6
+:10E590007E487E21FFD5DE70382565F17DABDD7FBD
+:10E5A0004D5CB47797F4742ED867E6C4FEED6147EE
+:10E5B00098807CAFCB619DCE7371638B7C946F0927
+:10E5C0000C1697AABF77DDF4809FE1BCEDA155F44E
+:10E5D0004EF5BDD92AF96A6D0501BA1F10931F7057
+:10E5E000A951E6D784EF3A037F35C51ACF4D966718
+:10E5F00071FE5F9EC5CFB50F5D925A82E7D9EB14CD
+:10E6000091EE0DAF53F8DF2D589735D43BE536C367
+:10E610003DF9B549DBE81D20FB57DB19DA93762974
+:10E62000FABD94DBB4F13769F537276D233F49C351
+:10E63000087EBE1F59FFC08887E9DDC7C65CD8EFDA
+:10E6400062FA804AFDD78F78B80CDBDB428D86FBFF
+:10E65000BCB3B3F8BEDAB697D3A329CF121886F4A9
+:10E6600020F929BE40AFD738C079D28D595C2E36FB
+:10E670009903744FA649B3879667C56D407B675D64
+:10E68000D68EA3C8AFE7F2189D37DA434FD339824D
+:10E690002DDFC2EC82F6770230BEA32048F8416736
+:10E6A00053C840B7317DEF6C98FAF75FF78DDF857F
+:10E6B000EB6BCCF5D3F843ADF74A8D4E1B35FDDA45
+:10E6C00068379EA35568F0BE5E5B97ED1546F26411
+:10E6D00010B890BD77E3D61137A27FCAB67F48380D
+:10E6E0001AEAE7B2B2F868FC1229FF9D0562C43B42
+:10E6F0004A02CDEBDC5E417B6F91BF63D1670704BB
+:10E700002DD8EFBF6D2D3F782DCC6791CFE9C5F89F
+:10E71000C9A7B6EEA07BFA8B5F34537CC2C8AED9D2
+:10E720005C0EB6F27712F5F78D2E69B51ADE9B5A9C
+:10E73000C2C2DE5184F1161F3B798CD13D63E37771
+:10E74000FDDD8066FC10254E2DF2DD8187B222DFD3
+:10E7500023D3DE1D2888EEA7897C7760575024BD1F
+:10E76000B11CE358691FB0AD04F73D55C704F21B57
+:10E77000F4E743E5B13C73585EF0103DAAB131DED9
+:10E780009D51F8E9BD6C4E2FBBF1508DECFEEA0DAA
+:10E79000A12C4CEB189E37D5AE90643CD7AE0DC47F
+:10E7A000D0FD925A590C60DC48766C890DFD8F2C97
+:10E7B0004194F11EDA34D354BAF764B9579A40EF52
+:10E7C000B3EE58D489F7EA6A5D12433ECE4EE0714B
+:10E7D000042C5DA4F769EAE43713E6E03ECEC9EF06
+:10E7E000E9E5C82CA00868D779199E2FC366A53221
+:10E7F00004A657B6E00DE17B576CB255DEC9DF9930
+:10E80000B971DC24F203D3CF81B669A1DFE2385EAF
+:10E810005B29E2FFAA7B93C91E0CB84C0CE3003FB6
+:10E82000CDE2E78296D892D0FB38BF590EF2ED06C2
+:10E83000543111F1F07ADBDA99D7C0777340A278BE
+:10E8400087FCAF6B6FBB06DAF7B459E8BE850E27BD
+:10E85000A54E32BCDFE05E6DCC5B22DEAB9058583B
+:10E8600039E4DFC179905D55C642E171BCC95E7E75
+:10E87000E82E3B894EBA813FE9FC43CBBF8779A0A4
+:10E88000D776B39FF0DEFEBE40FED5836DF37248AF
+:10E890005E3A966EC7BF635275949F630E249F9F26
+:10E8A000CE52F47712ECDA3B1576F47B45D2535D09
+:10E8B00035F3609CA12DD011331AF17BD8ECC1B097
+:10E8C000E67A4D3E4A4E2EC775BA894CEB23E8AF27
+:10E8D000DEECC9F743FDFAAF4DDABEF1F48D485FC7
+:10E8E00092ACD0BEDA9CC53C680E9B933B336498D7
+:10E8F000C7E8172D1EFC7B07D39E2B8847393FFAAC
+:10E90000B55924DF104E882FA9CAE2413BD95A9548
+:10E91000EC9126603D27D1E559A785EC21A9CAE1F4
+:10E9200027FBAB6D924B09937B6BAB658F64C6BFC6
+:10E930008F63A374ED00F23E27412C45BFAB45B376
+:10E9400097D3B475A5653B284DCDE6F273BBA4CE35
+:10E95000A4F77B816E30EEE6C06A4EDFCBD36DA4A8
+:10E960003797BF3E3C6D30FFE093D52E4F1E0076AB
+:10E97000DBEA72F2DB16AFFAA811E96E79AC4D460C
+:10E980003A34C58DDC3C15E9FEF766BAE7591B3B06
+:10E99000499913D69F29AEC885F030896A06D2738B
+:10E9A000C163C11BA5C94827EA16BCCF5F98DD7AB1
+:10E9B000A304F2A53D56CDC0F3B2A9D95B793E457B
+:10E9C000DD22209F6407783E5BCD10213F23FB09A9
+:10E9D0009E1FA16EC1FCADD9ED3C3F86EBA3DBB31E
+:10E9E00077DD88FAA8D6EC2943FFF4B330FF821113
+:10E9F000F87783787A870617BDFC79FC6EC6BF333B
+:10EA0000C4D3C8F217B476FB0728FF8D56FECA00A0
+:10EA1000FDBFAAB50B0DD0FEA0D6AE6380F687B4BD
+:10EA200076870728FFBD56FEC600FDFF516BD7391C
+:10EA300040FB37B5766F0DD0FE88D6EEE800E5EFE7
+:10EA40006AE5C722FAFF40ABDFA57D77C736BC8BEE
+:10EA5000F69A1BE415CA93FCD806F2776DAB2A240C
+:10EA6000FAAF9DC8F5BF4EEF6EED5EC0916C7E6E45
+:10EA700073249BDB01551A9D17AFCADB3815E9F0EB
+:10EA80000FFC9E22E88FA3780F575D25927F6FF9C8
+:10EA9000EBFC5D99E5AB243ADFB8A0F7B4F6FAFCDD
+:10EAA00003DA3CEBB4B4329BBF9791ABBA3C33C2B0
+:10EAB000F4A35936E66DC04F18FF5F97CCF54CFEB6
+:10EAC000AA92063C37A9053D83EBAB775A42E8FF93
+:10EAD000AA97252AAF4B2EF1E379BF2A4BA487EAE8
+:10EAE000931343F84E735D5DA1E1BDCF3A59A2F790
+:10EAF00063A484AB6C739C283766C8283FEB989C52
+:10EB0000584CE76AB04F437D525522A3DCC94D48AB
+:10EB10004E44B93C3787AFAB23B6DB8EF728A4074A
+:10EB2000447A2B60A42C11BFE7D5890105E6D121D9
+:10EB30002F27FFEBCE16ED4C91F1F3445DCEB7FFDE
+:10EB4000621AE9B15AD0630AE931163F2EB5EFFED9
+:10EB5000A6746CB405F5969C61626690CBBFCB4EF3
+:10EB6000A471773EC4F5D608D05BF8CEDAF642C67B
+:10EB7000DF7973D9C8AF5B2E315752981FF377D91D
+:10EB8000DC8E67A6191EDC678FC0F710C3E03BDC84
+:10EB90006FD45BB943E8AD9C2A909761F5AD2ED94F
+:10EBA000900F666BEF2A799807ED9B69CF6D257DF5
+:10EBB0007216F50943FDF2C798D1A85F408F5859E6
+:10EBC0007F39A8CB63DD6ED1E574ADA6376A23F437
+:10EBD000C6D072F7EFAF8F22FA140DEFD00C247F5E
+:10EBE000AB304E00E8DFEC1348AF30C947F7FB8786
+:10EBF000829BD95C2ACBCEA1E1674EF92201E5B414
+:10EC0000D927793E8A724F6A28F8EAF52CB6CCC724
+:10EC100050AF7D716C653EFABDD69A3B67EF42BA44
+:10EC200015E2E97E87A2F91DB655EF672746603CDD
+:10EC3000FC7B5BEB26E0FD71AF4CFE92F41205DB32
+:10EC4000D9619F9E44761CDF6F32D9E75F84F6FC62
+:10EC50008B1605CF050E3FABBDDF90ED2478DEB3FC
+:10EC60006705B5330B952E7EDECF08DEEB3212F949
+:10EC7000DF0969B76976E3998DDE3CE857EC1250FD
+:10EC8000FFFC474EDB461BEA0F6D3FC058DB4DB81B
+:10EC9000FF09062C5A7DBCE8CED81E51D0FDCF5EB0
+:10ECA000C9156E875A6EBA2A0BCF43E5D112F49775
+:10ECB000B1CDBED17C05968B7A7B2F5E1E42F1A52D
+:10ECC000E725C0C3331D5AB99AB6F12A98CF1E8BD7
+:10ECD0003E3E18D445389EA8D193BC11FBDF5DA2FF
+:10ECE000B7EFD9E89D4AF3B9DE047BB07C77E646FE
+:10ECF000677ADF7C87E7E46EAC81B59F56BAE27035
+:10ED00001BB7A4EDA354D4DBEBCAF8FD616400F497
+:10ED10008FE8F7882FE06DEFCD2ABA62FFF3D03F7E
+:10ED2000E20AA06899A9EB9003E0B6647FA5CD2C18
+:10ED3000E2FB5DA52ABEDFA5B75BB27736D939CB3A
+:10ED40005E194769947687F1FECC776867B35CC437
+:10ED500078A7436F2EDDA5E0BD99CA06A789EA33DF
+:10ED6000EEFF8ABE3EBDFDE95D6FFE04C73BA374A6
+:10ED7000A55E07B5D785002E51DAE9F5F5FBD55329
+:10ED80005CDECBDCC07FFF70733E6452A507EB07EF
+:10ED90006D7EBAC76637FB4B519F002A0318A7A0A8
+:10EDA000A753DC79FC5DEC88EF91FC15B4B1A41994
+:10EDB000282F574874EE1EB4A98EB1906F817D4AFA
+:10EDC0000D4C69CDB823E3315EA0659F93E47AEDE5
+:10EDD0008A0E5701F295C7C2D0EE6DB9A2331DDF7E
+:10EDE000BFAFBBD752F604D26F68B9EBAE303B6C05
+:10EDF000780E8FABCF4EF097213FDA811F511F372E
+:10EE00009A7D367C37454D1729AEDA0EE56F50797D
+:10EE1000B656EE997E0DEDCB4419E7559F37777ABC
+:10EE200009EA355722FFFB8423AE2A9B0FE501D95F
+:10EE3000222379DD9D53EE43383D23792A91FF9EAD
+:10EE4000713A658CC7025949FA401A914CF15956EA
+:10EE5000EDBE53F638AEE7F57936B9B9FDD0E4B674
+:10EE6000101E5A623B6F2E867631F789B20AFD3743
+:10EE7000DEFB7029C6273E76EF913F637C6B53AA79
+:10EE800044EF0CECAE0979B15E8FC03A77801DB9C2
+:10EE9000BE6A6627EE47D73345417B7DB730D38FB7
+:10EEA000FAB92745623BA07E4C9E315ED559608CF5
+:10EEB00097CAAA30E637E6F8EEC7754DF8436131D8
+:10EEC0008E9322280A3E1D5CD8C9283E3F352F4F1D
+:10EED000C6B8EEB8C28838D8A9C67E12AF32962717
+:10EEE000CF8888DBBAD558EEBADD98CF986BCC7F47
+:10EEF000AED3A38B9F3FE87FE7E1B17B9F64A8A7D8
+:10EF00001BBF8AA778568423DAED3123250F9E8B09
+:10EF1000645B3A67611C1CBB3486ECA583EE18A6C3
+:10EF200040DEBA94913CB526060FE07ED52ACAA5EC
+:10EF30002A69A8E081F7A1DC01FB5594BF91F0CBD1
+:10EF4000CEE6FE416725FF7B7141294476847D55DD
+:10EF5000BC5CE3C1AD63841FB6222CCFE3BD1F7739
+:10EF6000F3F338BA774F477284575819E26D320B72
+:10EF7000E03B94D9F77EA486601EEB95BC4AB4337F
+:10EF8000D6895D348E5AEEF4E1BE3B05E3BC4D18E4
+:10EF9000EFAD521A898FE7DDDC4E52D85C3FE2D1EB
+:10EFA000355BA4F891FA43317578F852AFBDD7A01C
+:10EFB000C7B1E974F9B29BFBE7F67488A217FDE0CC
+:10EFC000B7E7ED407CEBF9565F721BC5F58FABECF4
+:10EFD00042BA6437703B14F400DDCBD6E3C4F4B816
+:10EFE000C2EE1C1EBF763A47BC80BF901E47141667
+:10EFF000074E4777263CBAF0CB78DE933DAE5446B9
+:10F0000039F34BFDFE05E3FDE2F385746E3043F406
+:10F010005EA2F9D3D1AE4BD2C64B4A96BCF4BE3BEE
+:10F02000CC4984FA0F315E3F296FEF4ABC77B507B0
+:10F030000907F9E72E0EE748BA4DEFF0978E4178B1
+:10F0400009A00FB3FAD3B1E06EA5F3C0FAFB58A242
+:10F05000755C7FBA9E68E2F64FCF4285E22C87A2AC
+:10F06000F393EE04EEC74ED922A37D9B91F7500D8A
+:10F07000DD83B98FC9A8EF323A3A6F46BF57243FB4
+:10F08000041C71E3799CDCB7F3C39B4C9C3F589AFA
+:10F0900044788B8C2F8D8C271D9E93A0F929400FCF
+:10F0A000C4E27D00F94A8C13EC59C5E89D809217A3
+:10F0B0005B6EFB77E8EFCB111619E575CE5BBEA74B
+:10F0C0001C30AF2F5FF2E5A09CDE2675D913C2FC81
+:10F0D0009E92C8EF9F45CAEBE139A246AFA0375CCC
+:10F0E000DF3DCD46FA06E20AE6A58E968108876FD7
+:10F0F000DFF4275BCAFFA0DDA2DAFCF8F746DD1DCE
+:10F100007A3E8BECB09CB778BE685BD6465542B869
+:10F110005590BFE860F63CF21749EF727FD1189323
+:10F12000378079F69E9DE2EEDAF7DDBE00E3D5EAA0
+:10F1300053AF53503F176AFB9FF139425478491639
+:10F14000AF0FF926F27B81065FC64A3F9D0DF81B83
+:10F15000F3B885E2EEF2C5F2865CE4874613E1B3CC
+:10F16000DCA42C6D0EDBA735A71697E44CA47D011B
+:10F17000F3C18641E915980FDF614A3E5E8CF49A2F
+:10F18000036C86F22547E506644E550CF385D1A93C
+:10F19000D22B51FDE6546F498E26F7F0DCC7ACB197
+:10F1A000F43389A56C36EA65F8867AD7BC2B869F3E
+:10F1B000F7241BEF479A4C3C5EE4266DDD663CD796
+:10F1C000198FEFBD8921EBD8FEF56FD5EA49366777
+:10F1D000C8148F7EB2378ED2BDCB887360DCDF520D
+:10F1E0005C4E05233F28C285F2F7C8FCDDEE2A1EDF
+:10F1F0000F50BB9A09781650ABDD5351EFE07F8F6B
+:10F200009879BD0ABEAF425B4C05FF0B11FFBA6C8B
+:10F210002C11EBA7B34E8A63641D4CE1F112C67347
+:10F22000A76D03BC03A5FB01A42A13ED5346BF66DB
+:10F23000E77F17AA8AD13BE1F46613EE7F57B380CC
+:10F2400024F4F9E18E642BD44E3F8FDDFDF50719D0
+:10F250002897F3C51DBE37C86E889577A07E8C3180
+:10F26000F2A17E7FAD56A3936DD532E15B2F77ABD4
+:10F27000C729DE3E87F5D4E03E2BA72AD180E70BD5
+:10F280007ED9DE4CE69B10DE6F80BFAB9B27D13B67
+:10F290005D4AAF9BCAB7552B43F43F6C80FED389C0
+:10F2A0009E06EE3F8BCAB787BE48B81140B1ADE7A6
+:10F2B000A38452A5CF6E8D84B37BB5517EFF607F52
+:10F2C000643C39878BDDEC4DBE19E0667F40F4B4B9
+:10F2D00031FC7B3CC67AD373CF25F0F372BD7E2818
+:10F2E000F916AC0FFBDE3605FFBE8FB17E69F1C7A4
+:10F2F00009FCDC5DAFCFE7F7A35E63BD48FC44CEFD
+:10F3000017E695F2E3B0795D69B31ACACB66F79B4D
+:10F3100057CA4FC3E6758DCB58DF57137D5ED7E7CD
+:10F320005B079D975EEFA6A28BAB17B98E5BA65BC2
+:10F3300007803BAFFFD3B28BEBF75F160C5EEFCECF
+:10F34000AAC871542E272CDE2328E7CA99B216DFEB
+:10F350000967CE98A871C1259A1D7316FD14180F60
+:10F3600097E97D1FE55A4F368F4B39FCEC223F9EC3
+:10F37000C32CDF6751F0BC235BF35B83E0598CFC4B
+:10F38000BBC72627603CA0CDAD68FBABCE5C8CE74D
+:10F39000DBD37EE436927BCC68CFC07EAD18F535EA
+:10F3A0008830BA97F126B64B098FA3F092FD572FFC
+:10F3B0007AFE42FBAA9FF07D951EBF1F6E67B14982
+:10F3C0007D76961EBFBD491BE7BF7286D17CC0CE3D
+:10F3D000A7BF7B9B9A27517CF32F6D9D9BF0FED19D
+:10F3E0002F939313703F73589BB76E37EAF71AD277
+:10F3F00066E78D334581D7FF0791B1925A008000AF
+:10F40000000000001F8B080000000000000BDD7DE5
+:10F410000B7C54D599F8B973EFBC9299C99D64F2ED
+:10F42000E211EEE4C5044298608801AD4C12A0A838
+:10F430002C3BC147412D0E893C227921A8A1B2F570
+:10F44000864484F8206840A0A043148A56ED6011D9
+:10F4500001C11DA2A6764B6DECF661A94B47602950
+:10F4600002C2A8BB487F7F2D7BBEEFDC9B99B99978
+:10F470005150B6DDDF9FFEECCDB9E79ED777BEF7E2
+:10F48000F79D33172FD27F93087928892C0C1413FA
+:10F49000FCC7951162CFCFEFE9741232BCD42B8E2A
+:10F4A000A3EFDFC9D111329E9087E983D07AB9509A
+:10F4B000F06FE3E8DF22212BCBE9F7D030979027DC
+:10F4C000C57EBB40EB9F7408A2CC413B09DBED7CC1
+:10F4D0004BA7F3380879EA8EFC1EDE19296FF03944
+:10F4E000B64279B88EF80216E8445C44E8FB9D26E3
+:10F4F000D1DE594A8B42BFB3C64ACB3B7E7F1B67E6
+:10F500002364C40882FDD5B55693635711B2DB104E
+:10F510007EF322CC673DE7DF46FB79ADBB74AA40A2
+:10F52000DBCF3B4988997E5AB7ECA6278FA71132CB
+:10F53000E1B85809EFEB36DBDD3C7DDFD4DF321577
+:10F54000C6212DC45DE0262493AFE4ADB49FCC4723
+:10F55000DE73B7D329AFEB95F6846839BC9573F7A2
+:10F560004850BFB87431C0C7E2912C74BD7361AA12
+:10F57000F8DE3E550FED6E32B83B683F67F4641617
+:10F58000C0F1A20257F539F70EA982D0F9CF0D2CA0
+:10F590009B8BE38A1464D9B46C12711E26494C6D9E
+:10F5A000A3E5CC2462328F23A47C85D8F7008C5F3E
+:10F5B0006F157B288C6D1562DF8F605D2D3922EF12
+:10F5C00086C1FD0807B5FF791EAF81D07147EF30C6
+:10F5D000D0CED83E5EA4FF8D09C496C7EE892D9784
+:10F5E0000663CB57BD135B7E5562F09E681ABAE581
+:10F5F000388577EF012381F92E3A9DE4375278EF71
+:10F60000D31302EB975F32223E542FB278003F4E65
+:10F610009F4ADA6AA4E5838793F0FBBB7F6266DFCB
+:10F62000EB022F43597E3999C0F78BD202E5A974BA
+:10F63000DEAF7FC9DFE92D66CBD243FF2F176DED1B
+:10F6400084FAAB02E5227DBF7B1421FD502FF84BDD
+:10F65000609DBBFFC663BFE1E78DFE1EDAEFE9BD2B
+:10F660003F7E19E075FAF9A1A91C9DF335BA9EAB4E
+:10F670003AA1BECD2AF5D0F7134FBF98E78BDA97A2
+:10F68000453B8C31EB5C2C71B8CE56C1B3E259D8F6
+:10F690009F437AC4A725F3FC7541DA7E0997E39668
+:10F6A000A11F03C5D36228BB33ED145F27DA18DE30
+:10F6B0002E31D3729C7D579FB51B78E2BB2A523EF8
+:10F6C000BAFAC7381FD7C9F711AFF7E9655D12C09D
+:10F6D0007135E7DE46E7BFCF6C2B2129F0CCF10373
+:10F6E000DEC81225BC745CD78F9A002F7EC5BB7B09
+:10F6F00048E2F15C597FDA3CF9AAAFA8A7E33A4B9C
+:10F700000839F751D29D1E3A8F911B62F7BDC81F71
+:10F710005B5EA5C0A79644BD77C27C725766219DEB
+:10F72000109C8FEBE407B739E97C8718490BC0457B
+:10F730003BEE5A651D2FBC40FB716137FC459EF5C1
+:10F740002765D07D51E8EA758ED111FDB77428A5E3
+:10F75000B7451CE32FEAFB459A79A8FD4F94189F03
+:10F760007218DC6B42B8FF4611F6FFD483D39E3C7F
+:10F77000AE1F3C9F130F7A3C93A3DECFDFB0B82FB0
+:10F780009BB66BD8993E8E8F826FC3F36F66DC4E4B
+:10F79000DF9FD921B8810536CCDEFEF844F8EE793A
+:10F7A0003E00F3857A0F5DEF99C0DB36F86EFE669A
+:10F7B000FB385E8AB45FB0618A67B22B02CFCBA5FB
+:10F7C000D3D72A189F5B14D0FB4D401781DF4D1D06
+:10F7D0000A78BA817317D071CA051F0F74672DF3A9
+:10F7E000E8E509844CFAE25FFB86D0FAE603E3CB56
+:10F7F0003B697DA7CE7BD33F01DD3DCDBBB7015D2E
+:10F80000FFF69E0C5FD4FEBC03FB4BF7A5F3D606B8
+:10F81000EC47A6B85140997AAFABB61ACA138B0918
+:10F8200067A4FCD8769278FC16188FBCAF4B25E401
+:10F83000E4FE874A041DF2A3DB814E4E139B1BE8B6
+:10F840006E9FB5E5DF71BC97F438DEA4600A07FC53
+:10F8500077DF739CBB93003C62E9EFE4C915B64ABD
+:10F8600046D7777A510EE88883F6B7F0D931C807C2
+:10F87000D4F7DAFDABF7C7F6A3C58B8F9475016A91
+:10F8800046E397F6BBB4E9B201E8B1A195CA8B286B
+:10F89000BA6938DE652096C1E3103280BF04F09764
+:10F8A000E2259170BD66E41BF41F67A2787B0AFE17
+:10F8B000CA636542C7BF9BC3A59145A30285C0E744
+:10F8C0003841ACEAC88EF05752E1473E7F86FED9F8
+:10F8D000E906BE103802F40EB2741BC817317876F0
+:10F8E00013D4CB233CC08F860092D227F96932F221
+:10F8F000DF3352683BB67F718C5BA6AFCF01BD583A
+:10F90000B09D2D358A3FB505DEB48568F9F4CEB4D7
+:10F910002ADE0678FB4B1BACF35420ADCA604BCCFF
+:10F9200037B47C93CE0CE1FB21FC49F14E747A9202
+:10F930009D00EF0E2A74419EA5B594B6C4D937B583
+:10F940009DC3D0522A01FFF8BEC5DDC3E0463CB4DA
+:10F95000FCE93B693DB0EFD7E8742817E672AC7F4D
+:10F96000B57D913311BF9666071D117EFD84228FF0
+:10F97000557EFD8495C1E372F9B5F639ADB328051E
+:10F98000E0F7299152403EA59AEA9E013D43AD7FA2
+:10F9900022811E50EA64FCE99D838529214BA4FD48
+:10F9A0009FF3BC6500B7ACAA7E0F4FE79F7503714C
+:10F9B000B7D3651DE3DDF789147FEE2254BEC3B3D0
+:10F9C000CC67003E483AD211BE84B8A7C2FE2F9839
+:10F9D0004EF1A59495411ED77B0DEE4EAA37D40962
+:10F9E0000C3FEA7670FE760AB2BB1E8DDDBFF9DDF4
+:10F9F000C6081EC3FF6D8EAAA7E3D40BFE95206731
+:10FA000087514D29AD82E2EF73B1DF2F22419C5720
+:10FA1000C38B178DF1F0E2BF15BCF8739E6706AC7F
+:10FA20008F9B69C2F92C7989437DC06108A0FE13C0
+:10FA30005E4CE5079D2FF92DC39BFFE4BDB8EEE6B4
+:10FA400065733D77D17D38D75AE7B98B56216B80E6
+:10FA5000FD0E307D6FD1E4401FF24122BE727B1655
+:10FA6000F4E74578501889DB101E028EF7DFBF657A
+:10FA7000F8749BA2375EA39B89EB0AD713B187F278
+:10FA8000B9892F1EC432FDD772FB4478B07EE6B729
+:10FA90001011E0BA80C8064269ED01A713F7AF9EC6
+:10FAA000F41B185DFBDB3368BB26AA6F025F8BA3D8
+:10FAB0003F7C3F1A1F0F6BF0F1F015C3C709884F49
+:10FAC0009F1137E2D36D1A7C3C9C001FDB07F0B11D
+:10FAD0001CF1596D4FF550624E1DFC3DE08B276ABD
+:10FAE0009F176E8E2D93E7A2CAB98017B41C852F7D
+:10FAF0004DBB2E1A3D71F064DD80BCF717D58C89A3
+:10FB0000E6136D38BF230A1EADBB657E36F0E935BE
+:10FB100060700C513AA800F946FFC27D234113EDF5
+:10FB20003FE9AA8132D697AF6065FFD65F7B375C2D
+:10FB30004BC87ABD2F5BA4F0AAE3BD7D3A902FF9A4
+:10FB4000BEE79C6057E83C3902EEABA7D03B0636D7
+:10FB500094E1E353E35A8A5AE2C04F9DFF7A2E1094
+:10FB6000D4019FDECBF4376B59581F2D5FDF703205
+:10FB70003994D21B427C0DBFCA11B02B36726BB3C5
+:10FB800001CF36664B5C3B5D53D9AEB64AC45FCA03
+:10FB9000EB0B28DE35EEFAB06F282D974DEB07F40E
+:10FBA000A3EBF62E7E1BF8E5F824669724B76CD5F8
+:10FBB000D1FE32EF748D6BA7F8F6A653C27192AEE8
+:10FBC000EA3A08FD84174B620FED276B85ECBCA762
+:10FBD00018C66F6943BCAF21F83EFD7BCBDBE0BBB1
+:10FBE000478690541EBE236D1C7CB7329DC3FD58C2
+:10FBF0003997CC7AA518A84844BD7ED82C916B9B28
+:10FC000000E5964AA41749B4FF321BA9AC2385DA54
+:10FC10002DEB6C04F975BA8EBFB3863ED78D63E5C4
+:10FC2000D4E59CA70789772DCE2FD348A671A9ECE0
+:10FC3000BDBF18598E6727D6FB71BF33AB5B4A61D6
+:10FC40001E9979ECE930F874F974FC43EFE9FD2B67
+:10FC5000E83A0F29F8B2746B5566B45C3B74C6245D
+:10FC6000E8A8DE7C284BB5178216B0179696566723
+:10FC700002F3C8CD9F9602FBEAC889AD3FA7F7A45F
+:10FC80005C05F2FB3D9EC0FEFD97C59302F4798DA5
+:10FC900081CD5FBBEF9F29FBD97C8123FE28BA6C05
+:10FCA0009E751EEDB0E60B42CCFB330F9A08A810F0
+:10FCB000037AC5C2DEA9F05D23E95F0978D8184848
+:10FCC00026FE28BAB82629FEB82A3D345FE0891CF2
+:10FCD000775C43ECFB0B69444E8BF75D46EC7BBADB
+:10FCE0008E98F29ECF07D601EF4945C8E6A576F873
+:10FCF00074D05368F99C5F27EBC7029B63FCEBACA5
+:10FD000018B201FFA2FA480BECCB592984FAC63984
+:10FD1000CA9AA01EE4780DECAF10B6CDB446C65119
+:10FD2000EBA17DF43E9E9D652041DC9F30CE03E03B
+:10FD3000278F2464D3FE4F0C12E869FB0F22FC547A
+:10FD40007C8986A31CC56F32DAFB833A4A5725B9F2
+:10FD5000196B8B8BE896F5AA7C216BAD87F2810C31
+:10FD60005E17C32792CB06F806B2A9753A5EE13357
+:10FD7000D96B275F1B5D66DF47DA0FA981FAB26294
+:10FD8000D6BE2277E87B2B40F6922E9C1F5D470E55
+:10FD9000C06FA06CD2942DB43C26AA2C6AEA1D9A9E
+:10FDA000FA2C4D7918FBFE8C359803FE81EADC11A4
+:10FDB0003502A5D333D9C1391C2D3FDAEEAC994CAD
+:10FDC000E9B4B18CE9174DFB39374722F06B723338
+:10FDD000BDDEE20E19EA8A010EFD7DC0571AF670EB
+:10FDE0002247E9C112D819C432B493A2DA05386C9B
+:10FDF000D710F810DB25ECDFA5433AEF741D65DF63
+:10FE000005FE827ACCC31D8BBDC0D8FAF48C6F512D
+:10FE100029E7194A1B36EDA9213E4B84BF9ECDF63A
+:10FE2000BC89FCF50027027D0EE029F46B89D085A2
+:10FE3000FAFD9FC6ECFF1DA849C94B3F6913E8F7BF
+:10FE4000FFD1F897F1A077FF499123EB397F118C0F
+:10FE5000BB89F88A408E7FBFB1E0A08E7E77441FB9
+:10FE6000DA02BCB73DF76A84DF116B683847F59258
+:10FE70008772AB6A040ABF23E9A12D00CFFFC8AD8A
+:10FE800066E5E1A1E13A5A5EDDD3C4CA05A12D5071
+:10FE90007EA567362B8F090DE769FB3CF93684FF99
+:10FEA00036313E5D2FCB65FAAC3ABF87CA3C4B7307
+:10FEB000418F6E60F267CEDD876703BF9DA323226B
+:10FEC000A17C7ADB99632F6DA3F0D8D69A4C7A186F
+:10FED0003A7A056A6F6432D4A772A20BF97AD8C94C
+:10FEE000F41BCAED42E0D74B1E6F923A9D917D51B3
+:10FEF000C7CF1CD5B213FACF9C538C72C4ECF41C40
+:10FF000081F1D5E7F451EC79245764FC9BD779F063
+:10FF1000FB07AC7EF87E8D99AD8BD20FEEB345D941
+:10FF20009735CABAD6E4323D63BA73CA91DCF1A000
+:10FF30009F28F6CEAA40FA283AAF6E8E04C06EA46F
+:10FF40007A8A6C063E5C9F84F64C37CC1DEAD766F5
+:10FF5000FB653ACEED1CF1027F51F949B7DD939D67
+:10FF60001A65377697D2B225E227E8AEF1642739D1
+:10FF7000E099A1031B4AE54FDD4ED64E954F99ED12
+:10FF80006C9CCC35453DB09E6481A0BC9B37ABB02A
+:10FF9000A70DF58399386FE2F16473B4BFE3F5B947
+:10FFA0003A80A3BA5FDBCB3C2FE0BA78E6F750F794
+:10FFB0004D85EF915CE6F7A8E3A97E41F1EEF17C77
+:10FFC0001FF647F58D1214EC8ABE710490767C04FE
+:10FFD000CE44088D87F7FF1FC2AB1FF0E9DBC2AB31
+:10FFE000B195F211DD25F011058EEBB9A03E93F12C
+:10FFF00011F44BC07B9047CF3B7DC773A3E861CE24
+:020000023000CC
+:10000000038DA867AAF34ABEFFB569DF234087A71F
+:1000100090EEE6FC2019FD085A3D50B503557D359C
+:10002000911DF8A9420F6ED5EFADCC23B938F4D2AB
+:1000300063145EA9C42A021F3D62088D71D3F6477E
+:1000400074BE675F83790FE145CA4306F5F7421E28
+:100050008FE39B553C2161DB2847044F56533C31CD
+:1000600041FB1A03DA25DD76FFC6F98027B70C734A
+:10007000CB12CA61A467B93519EBAFD11D25E0C712
+:100080000F4F1045D033295E617DF7EC42BFCCFCA9
+:1000900031B219FDD349FE1EC0BB520A00E86FF60B
+:1000A00028AC077F08FA91669BD87883F18AF92DEE
+:1000B000461256EF54F0B63E17F136A39D303F90EE
+:1000C000E029A989D217BE9FC7F022B92CF4EA1FF4
+:1000D00040FF7CD4EC2E20CC6405FF12E9CAC4FE9C
+:1000E00028BE8CC81BCFE438F47BD7E3D6AD8CEFA9
+:1000F000B9CB01CE0F5BBBC832F40FEA71FE9BCDCA
+:1001000041D4C37526C90E7EF8393C595F08FDB548
+:10011000EB45C0132DBC2BF312F91F42F746FB8BA6
+:10012000E71865630ED43F6846BB40B5FBE6A430D4
+:10013000BA52ED3ED5CFA11D47B5FBEED4D873031F
+:10014000F59D7F2DA8A5FDFD59C13377EF8582B9B7
+:1001500016B66EF03FD5C25F74DCDAE5E60FC1CFAC
+:100160005C2BEB83461BF091299E50949D4636B044
+:1001700075F87EA5F7039C5A05B27E3BEC8FCCD672
+:100180004FEDD8FAE8756D32B075C93FB0C6AC6BAB
+:10019000938DC591BEFDBA3E1A1FBBAE93E3957514
+:1001A0001153066DA7C8B93B5BAD1F7225F409EB6F
+:1001B000A24FB29CAECB1559D7B23CC64FE7287CB4
+:1001C0006C90DCCD637A7C1CBBFDFFC67ABB9EF2D3
+:1001D000C45BAF769D7FCEF3FC202F1DE9262896C9
+:1001E00045F0DAB791AEAB0CF635DDDF86FBCAF031
+:1001F00093109B1BF8D89279745DF06CCB447FE12F
+:100200001CA3B407FCE6E44729CA3A09F281251B7E
+:1002100087235D52BC6574FB14F3BF2C317BD17F07
+:10022000B364B1E8964558FF2B680787297F45BD21
+:10023000A43596AF7F3D1CCC39B5C5D17030E5CC27
+:100240002D8EB3EFB211F139D1BEFF990FDFCBE59F
+:1002500025F69790E5B17E0AF0E70E94F9C165ADF9
+:10026000DF8390BF1963BF9713E051E8FBD1787427
+:1002700044AFE0D13233CA1F158F8E5815BF900698
+:100280008F08D5A2818ED5756BE13807E018C72F8E
+:1002900044F1A900E07844B1CF283E15001C553A3E
+:1002A000B8B395F1032DDCFE9498AF7DBB7568F073
+:1002B000F8DBAE43AD4FB40E55BFDDC02DDE08F800
+:1002C000B9219B88EDA80787C6809DE430F88B6034
+:1002D0005E9B0C947E91AF303FE1678762FDCEDA82
+:1002E000F95CB8647EC1FA4DC42712E1E5E5FAF97C
+:1002F0006A35703BAAC06910BEE733B9A9F5F3357A
+:10030000DBC24F83DED49CC4E4F7D90356A47392B6
+:100310001F9A03F6C2B97D4602F2A0890B15C27777
+:100320006739CF5CFCAE2D590239AEFA738FED669A
+:10033000FE5C99507B9D961B7CCC1FDD2CFF7225AB
+:10034000C0E5629ED002F672F39E587F20DD0F1B3F
+:10035000ECCF591DE987EF9B787F3D98D8EB0D4C8A
+:100360007F59AF23018067C48F70B410ED9A6C91F0
+:1003700080FFAA49F761E13D517E8726A5BE298706
+:10038000F9D3203F01E32E309473305C9A1E3DFD7B
+:1003900025C4579B7669E93B96FE1B2265EE220732
+:1003A000FD45D53B23F48FFE03C08BC9C45FC081DC
+:1003B0001F909593A7F5FB21CFA159F13FA7F78691
+:1003C000A6827E632D0B10E0FBCD2799DD3471FFF3
+:1003D000D637C13F689FD63F1C54A866251EA5B5D9
+:1003E000D726EC5FCB833F4BB5B7A2FC67453363A1
+:1003F000FCA72BB01DF8E360BC10BC82B881C0F430
+:10040000F2F58A5E4EF577E4F3F3BA46A2FE0EFAF1
+:1004100035E849AA3F0FF426D09F77E757CDC8A704
+:10042000EB9C5D50757DFE78361EFA29C04934215B
+:1004300031DEAAF051BF03BFDE57C78514FD8FB070
+:1004400078D03DBF48FF4ABA5C949F307E7F7BB432
+:10045000FF7D9FC6FFBEEFCAC5833281AEEEE1A429
+:100460004CA0AB891AF9B62F811DB0247F201E94B1
+:100470000974ADB63FC1FB30FEA1C61DEA21CE8294
+:100480007226887189BB5B88BB13F3407C2BA1DC8F
+:10049000B890889D14DF1B26FB58FCA38588374E37
+:1004A000607156298ADE208E195D263B6839460E1A
+:1004B000F6631CA489F6B0C90D7E9AD8EF9B89BF5C
+:1004C0005A003CDE73D118D34F37DBD73B15FCDE27
+:1004D0006866F18389CBB7F224CA8F9332CEE37C6E
+:1004E00008E8F7177AF45FFFA7828F2A3CFE9C5733
+:1004F0007513E05512F8D5E0BB878CA8C71CD791BF
+:100500008580DF6BECE4CE99F479F641E2C9D7033C
+:100510001E8B39D1FE44F5D9B9CFBC10E8E219855C
+:10052000EFA9EF2BA051BA120F40FD3F19F3472856
+:10053000FB2F01BA29CF55ED0E520271880F157E9F
+:10054000DA74ABC507FD85748CAFBF98CFE4C08B60
+:10055000F906DC3FB53CE08F53E8828E83FD255DD4
+:100560004562E2D73F53F055F58713254EB7BE3E9F
+:1005700089D92903F4A943FE9B5CEC35F890FF551B
+:1005800021FF0D7F6491002ED34E37D4C33A3E9D98
+:10059000954420DFE62E254EFA6EBE1DFB55E38BFB
+:1005A000FF40BA8889935E2A5DFC3E421731715242
+:1005B0000AD764900BFB74CCAEDD47110BFD8201B2
+:1005C00025EE2E100FC8AD7DBB46A21D3357F15747
+:1005D00053BE81F66B98CA37B6DFBE8DF3E0BB40E1
+:1005E00001E6237CA8F73FBF1DF49903CC4E53F7D7
+:1005F00063DFBEA17EE03B134F7F9103F0DF77F214
+:1006000085A190E7B14F89AB37188285E84F31302B
+:10061000F9DE600B1602FC5E57F0A6218996E9FB15
+:10062000BC745F18F05ACD8B8176765C8F64037F43
+:10063000CE31C54E3F4AED769817A5967E88F7D302
+:10064000FDCE8672787526D3A7E9BC002F8E1D18C3
+:1006500083EB5BAF67782CEFE5D0FF73541F3ED17F
+:100660004ABF3F9A7D156913413E5FD8DE07FD3FC3
+:10067000CD13A30879479F9FDF43BF3F378417C13E
+:100680002F59A7F34ECD067EB19BF943B4FB00F280
+:100690003A3AAE7B968473D06FBA303700F87376EF
+:1006A0007F11E6D3118748645A6EDECBEC476D7E2E
+:1006B000C4717D2CFE6BFB857581FFB219FE067D32
+:1006C00024BA7D9CFEBEAE7C561F2A5C46E13145B5
+:1006D000F24905517E80E637B2518E1C7BEC73DC0B
+:1006E0004FD2C5E2E8C7F59E39303FFBE4A0A13602
+:1006F0000A1FAF2E50FC5046A65F50FE6B88E637AF
+:100700006A7D7915899B9F525EC0E8DCDACFE4F4FC
+:10071000E07A86E7F7926779E0175743320FED6F7B
+:10072000849267732FF9ECA011F4A94029E6F18CAB
+:10073000581E443E40E78BF8797C630AF247F22862
+:10074000C3D7F93F3222FF984FE507F367B0BC42A9
+:10075000F228CB1F3AF19013F1B97C45B01CE9C1E6
+:100760004EDCA047BDD6F1A1CCD3FAB93BB852C8F4
+:100770009B9CDBE1443BF0EE5D4EDCDF890A5FAF22
+:10078000337A304F923CC3E29C773D518FE334265D
+:10079000133B8FFAB5DF007AC4C21D1CC6C32706FF
+:1007A00018FF6F108207414FD7E6FD107F6CBE0126
+:1007B000C82312A5C783FC211ABB2B76DFE54BD2D9
+:1007C00017B472667141427DE1EFA4C77F337D614A
+:1007D0005981AAC7C7EA0B60FF17303C64726D27C6
+:1007E000C7F89CA22F3482BE00BAB022A75539BFE9
+:1007F0004091F32778A667CC37AEC5E79A0296E713
+:1008000070370929790E6103E87F89F0788D322FDE
+:10081000158FBB008FC747F0B8E164B0CF887E0763
+:10082000F76EC8D368584E82566AB7CF175A509E93
+:100830000D118988F9AFD53E9C57E6126AAF51BCBD
+:100840009C0FB1FC7197AFC70CD25B34FA8A3A6F38
+:1008500015AFB5FAF5C4E57E1EE28BBE9104DFABA1
+:100860004F91044A61BE352666DFD4982C411EFCA8
+:100870000F93F567A2EDCF1AC1F322E33BC3EC2738
+:1008800046234B23D0EF74A7E737A3D2237A7B729A
+:100890005978E563B43F3D29D1015F57C7373B2BFA
+:1008A0003F298638AFD08FF62BC962F92C478A19B9
+:1008B0005C93E93E6CA570D50B32C24F6F12ED6DA3
+:1008C00076D8FF7E8CD385D309FA6DD5FDDA622503
+:1008D00032E4151F2966787FA458C4276D8FF9006C
+:1008E0007A176D4FFBAFDA67463E727EAFD50FFACF
+:1008F00004959323ECB43EE34FD40EA4E5B3FBACD4
+:10090000A8579D55E49B43F5DF9395B8FFEF2A78F0
+:100910002393AAA160EF11EE86A174EE44B5431AA9
+:10092000ED89E2DA4ABDB3FF5686BF46D46FCEDB0F
+:1009300043F74199CE0773E0FA14BC6ADE555DFABD
+:1009400000C81BAFC5CDA0EE2B057DCDC82FBDD5F2
+:1009500044813D955F1E5E06783FDC221A6993C98B
+:10096000233EF8FD6C5AFE68979E18017FB6DD9411
+:100970001284668227CB3B66F07CEAFDFAA3A128AD
+:10098000BEB368476CB931105B6E26C2D15094BCBF
+:100990006AFDA0FED76F45E1DBB902AB03F08048EA
+:1009A000C47D91D2D3F107F7906320BBF93B52800D
+:1009B0009FDF45D9563C7AFFFCC185BF7E8B7E27E1
+:1009C00018AA3E2F40FD5232007DD5523D279E9DF4
+:1009D000BF4DE16B4663CBC9AD143EC6D78DEE3635
+:1009E000DAAAB7C0470AD3C13E0EF7C1BE1A479C68
+:1009F0002981F846D5882F30BFE4FCBF1037C0E905
+:100A0000BCB912F1E9FC46B3047E80EE1C0BF3CBBB
+:100A1000BFC1F9396617CE184FEDE9853815E0BB2F
+:100A2000E1951B41AE4C308A2B445CAE4987FB4DAF
+:100A3000AD63FAEC36C82BC1CFDE4D0DF43637D896
+:100A4000D1FD362086A98512CB9FE05F3498E89FC0
+:100A5000CE0E4F511BFD6E91378940DEACF0A5E004
+:100A6000053C7B18BA8AB22B8715323ED3680A1927
+:100A70002AE977CD5F2C9D96AE8BC47D8C7A9F67DB
+:100A8000289DB77E4F6970287DB5A0B51AED672AFD
+:100A90001F185F3CC0F8E2826595F89E9B390DD720
+:100AA0007B82AE17E0F2E64623AEF7C4700BFA3352
+:100AB0004E6CE1B0BC403460DE2DD5A7D22A1DF0CB
+:100AC0005E2F1AC96078346F7878E5465AFF6E3623
+:100AD0004F388AFF7FD9FC738C4FFD85B0F1E55DFF
+:100AE0003CEA697F11C3E54180A7D4628BB6D71772
+:100AF0006CE1BDC02F176CB9F7DD0900B799B79548
+:100B0000013C26D99766489648BDAA9F0AA915DBDD
+:100B1000812E277D59DD3F09F4C42D946EE8BC0574
+:100B20001DF181BDF4D696EFA27DB0A026C90EEBD3
+:100B300093366F9B0AF2F82F354374B8AE9738227C
+:100B4000023CECAD19F07E012778E3E1D5E1021E0D
+:100B5000F1AA7284C50DF271C1EF78C4174A67B764
+:100B6000425CA9718B1EED8FB7661EFEFD6C47843B
+:100B7000CEB8991B664C84EF7FACC7EF07F4BFCDAE
+:100B80001F7F007E17F84735119043083F2DDD1970
+:100B9000472C2F847969E96FC18A964296EF717963
+:100BA000744836333AF41572C8A7BF011D2E2CBC09
+:100BB0000C3A24C35263F48EC17C4F46BC55E3E526
+:100BC0002637F16CB3607E9487A3FC7A6DA180F523
+:100BD0006B0B999D29FCF59E1DBFA2704A2BF4FD5D
+:100BE000A010E42BF194827C96C26215B8E62D8A9F
+:100BF0009E4B36B3F318600FC1FEAF4F27DB3BA30C
+:100C0000FC5F8F417FE9C817DAA19FB37FFCA20F79
+:100C1000F6AB29E74C09D801CD17FE0BF36C2CFB82
+:100C2000597E96C51DC6BC35BDC38BF8A8F2FD66BE
+:100C3000379343DA755D28D4333EED08633F635C38
+:100C40008C3ED5F8F4A6D6248C136E72F8CDCC8FDA
+:100C500045F553DAFFF4321EF98CA9AC9D801C23B4
+:100C6000153CC6F7267DF16B02F1D077AFAD7683E8
+:100C70001E6C297B5348837556E895FA9FAECAA52A
+:100C8000F5BFBE760ADA73F764F112E853D3CBF2FC
+:100C900064949F1E96273FE98B14A4C319F5335023
+:100CA0000F56E7EB2526C942F1642625D6E8F30462
+:100CB00033AE354B9628FCFAB48B9BC6EC0029E585
+:100CC000E631CCEF162866F23C1A0EF7641970FC78
+:100CD000D905952F01BE4CBA8EEDC3A9978CFE1590
+:100CE00074DC53E6F8FADDFE42E647C815AE47BEAF
+:100CF000B4F42523E66B9CE6E27F7FF72A1EF3CC53
+:100D0000EA5771C44FC73BF5FC6B39C0D73FDAF6E1
+:100D10005A4E6DD47C12B5FF6361227F76F0AE68C7
+:100D2000FFC074038B139171C6187FFF749B721EF2
+:100D3000E612E35FFF9430EEF38B6130DF5F0DC4AA
+:100D40007DDE19161DFF1A8863BA59DC471BBFCC1C
+:100D5000AFF83765BEECFC41ABA0CCD76D6471AC8D
+:100D6000792C4F62C98134C4BBE986F0E318DF7C7B
+:100D70008317953897C784EDB3587D8275118F27F7
+:100D8000DF518EFE319C0FB7870B5A6DDF627D8479
+:100D9000C5B5B4EBABDDCFC78DD336BB585E48725B
+:100DA0007118EDC0A3EF3C0B991803F86EDEEFD479
+:100DB000459F5B19D06715FCBE09F09BAECFBC8A7E
+:100DC0009513E175227EF5A822B755FC3EBA2A2F6D
+:100DD00005F0ED215353A88FC2CFC3A710F3105ACB
+:100DE00056F241E40FACC88778052E4491835B3EF0
+:100DF000B0A27DD6AE6F7906CED9C96D02D946DFD5
+:100E00003B929AFC6DB42CE9AD9847777FD28CADBC
+:100E1000608786A882CBD1F2E74947B6829E404CD4
+:100E200029444FC791AB94F60693D84EF58BA79201
+:100E30006DC85F5AEF2228BF334990E32840DC2376
+:100E400073991F7CD16E0EF3E729C583DEE7CE8B45
+:100E5000AF8F168C64FCFB8F905045D7EBAE8EFFA6
+:100E60009D7BA4EAF7137CA128BBF461CE2D29F960
+:100E7000E404F265F5A47F36F265AAC7FF9ACA8337
+:100E8000A1FC2BE8FF3EF6A0EF9978E792D4E75D4E
+:100E9000D5F1FD0A1394715D5D9C5F6F43FAD56DCA
+:100EA0008DA15F25AE6BCD70530903F17C16B7CDD4
+:100EB00027EAF9940D10171952C1E668F38408E87F
+:100EC00017595DD7135F1AD0D3C44C906F4BE6C54A
+:100ED000DAB959B5ABB2D10F597BDF0C90DF1BF4F7
+:100EE00096555C0A3C63FD871B34FEC3AFE30B5988
+:100EF00009E9664216F8633644E2C1883FED73455E
+:100F00003FCFE12A48749E4346BBD4E7033DA8D2B5
+:100F1000E4EE710FA61F52E1CE8275BDA8EE9B4292
+:100F2000CFCD0A6A72FB39B44B07F343059E8DC3DC
+:100F3000109EE6AEFBD16E4A2E657EF7E4FA5A1F8C
+:100F4000F09F64CA7FC08E33185A38DCFF89CC6E9C
+:100F50005BC2B1F2924A5194E9F7069B923F7D033E
+:100F6000ADB7039C7CBE68BFC335BA7B2AA3F3B47C
+:100F70004542DB031F9EC5C69B6E5ACEF2C47D540C
+:100F800047CA8EC0B14A81637E45123B6771AF0983
+:100F9000FD719BCD5D385F9DC4ECECDA4E33F2BB46
+:100FA000A1BC0BE352BD7A861FB2D584F4EAEE7D74
+:100FB0001FF305875E9D25F1CE28FC59CAEA55BC72
+:100FC000209A3C138341EA037F239D881BF2949669
+:100FD00070525F15AE4B0CCB6E58B7C2974B9298C0
+:100FE0001CA1E66616832B8B3B6AF68BE20D8B0306
+:100FF0008CB1303F17F149A87769D63B186FF6BA24
+:1010000080DFF60EE0CD1E573C7EBBC62EF5F544C4
+:10101000E30B9156821FF8111D0977C6C31F77ACE9
+:101020009DAFCD9BD4DAFB4DADD55EC5FE904DB8DE
+:101030009F06B43F9A96557A99FDE16A037F59F36A
+:10104000722AA9689BEAFD9C09FA6B9E6543FBBB6B
+:1010500079CF4ECCA7689A46DC308D5AC59FADAE8D
+:10106000F3A89EC549A9CC0A403E47B73DF4349C3D
+:1010700083EDAE57F3BA589E93BC8753F2BAD43C73
+:10108000C0F011F0D7767312FA6D07CED3D2FD6798
+:10109000F95C979717682DF63AC112FF69C17FFC7A
+:1010A0002629FD32F2AAE582755F9D579D742BD4E7
+:1010B0009B602F947A4003AA2FAB658F59827CAE38
+:1010C00048BD40ED4ED31E8EB597D7DC3245C07378
+:1010D000704AF9F327E1BCEB1A3389192F7A7E8223
+:1010E000A67F302D2D92FAFD1F664EC9C73C48657C
+:1010F000FE154F7A86D1FEF4B1FD21CA28EDA1A0DC
+:101100008EF7C2E863DD8F0E8BE8ED548FFF6CE441
+:10111000F888FEFEF0E1E95D63E958C9E26778EE20
+:1011200050D5C39B1D2CCF5A8BE77F53E414B58752
+:10113000A7826AFDF0ACC55EE877200F72FF5C0FF6
+:10114000D8C16A1E64F3722F9E3FA47ABFCE057980
+:10115000D57F3C73E220013BF314FA039A2F08CCAD
+:101160004F4EED078EE28B69FF5AC41FB243EF0763
+:10117000D74EB75D26808FDD07B8F1805F84B4E479
+:10118000DC42617F9BCB9384FD25C83FC873313F10
+:1011900077B3AB6A6321C0FA398E803EDEE9FA1478
+:1011A000ED8AA6BD53C6479F97ADDFB38E9DBBDCCE
+:1011B000A18FBBEE3C17CB776CDAFB2AC67B4EF9CE
+:1011C00039A4B985827F35D89B0B17EAC0B2226556
+:1011D000FEB998374D661908CCDFACD821CD3B6EEF
+:1011E00092E1FC6E33FD8F9200D9E49D8FFAF6A652
+:1011F00059260BE40934BB6A1723BF13933C60CA1A
+:1012000069E739900FB92C09F3AA3AF7E8A7819D4D
+:10121000544EE9E26716E0ABEF39B702FF4C1BC74B
+:10122000B78B90771A5FFF2E1AC5E45007E795FF3A
+:10123000B90CE338243ABF7DC41E667F4D74196231
+:10124000FD932E66175E2BF75703AEBD218492C126
+:101250001E6E269E4FC0EF45BC1609E3582480FE43
+:1012600040C78312DA4D2647E891B1507FAD8076B2
+:1012700093EA4738BB3713F5B1975DBEEFC23E9690
+:10128000F3A127FF19E0F688A0C4C3185FC9B9C944
+:10129000320EEC2BBD83E93366AACFC0B9A1EB5661
+:1012A0001FFF6535F0568717F50842851CDCEF50A7
+:1012B0006DE2583C48A33713D13D19DA4F55FCD2A3
+:1012C0000574B74E9810353B2EA6813FC32103BC51
+:1012D000DFA10B48A3F55388A783ED0BDBBFF50611
+:1012E000A6AFAFD799505F57F5E164473FDA898DD4
+:1012F000010EC76974BD82E7471629E71406CE0BB5
+:1013000008213C3F51EB4A56E2B01D0C3F493FFAE1
+:10131000C3C88B6C1FA8E689E72A54B8ABE70CD486
+:10132000FE0C4A7CB751F1E75280317A74A9F1DDA5
+:1013300015CA533D07C2C62582541EED775C5F4334
+:10134000483FCE4BB2C17C1FC9F0DEE7A2DF1FA52C
+:10135000780C78767455B29F708047FD1E88D3C88C
+:10136000A52CFEA2C5A7475C9C72CE2C3C15F3F0C1
+:10137000F6263867B627F69C19E50F8BDFA6E394AF
+:10138000951D76037EAFB12BEDAF2778BE407BCEA7
+:10139000AC4BD987FF73E7CCDC9CA7873EB7BAEC90
+:1013A000B1E7CCDC6CBFD43C19EDF9B2B3D94181C3
+:1013B0009D07093DBD0DE5A511EDC2D73FEEEB0040
+:1013C0003FF3B952831BCED564DCF64E07E62B7192
+:1013D000420BC44FB5FAC0EF9CD53F01FA5977CB09
+:1013E0006E37E68F6BF481447E008CED46F9890EF2
+:1013F000B8AEAC1FC0DCF5B90DF0ED34177E1CF2B1
+:101400009AE5037CDCBCE60F5C89E2629E59D1FA66
+:1014100069879AFF674F8AC987ED4890FF9748EF21
+:101420001712E6FD5D8FFA5BC740DEDF34557F8B18
+:10143000CD6B1693BED25E56C79F1672C6E4117C62
+:1014400072C9EB54EC9804EB4B64B75D6E5E841686
+:101450000E1D09E4E85F5D03F13F4D5E8447843C67
+:10146000820EC823A04F812332FACF760EE44504C2
+:10147000D15FFCEA48F47B1913E645B0FC3EE1C0BD
+:101480004809BE7B58EFF5803D23EFD42B72C0FF97
+:101490003CF84D3A0E64A39F8DB84225C01F05FB52
+:1014A000D42CD0AB3A14FC6CB8F4BC88B4A2387914
+:1014B000115BFDE31ECF65F6737F32D5CBB61226E6
+:1014C000A7E4FDCCAF49E78D7EBDF063C3515FE576
+:1014D000669A701DC7DE30F618510F77639E436D14
+:1014E000162F827CE9AE293F01F2EB18555C818E04
+:1014F000EBEE5E8EF66BA2FDA95B151B7756DF5FE8
+:10150000EA3E8D2B62FB7414EC7B14B432FA8B1719
+:10151000AEE20E62FEB626EE5D56441439119BC74C
+:1015200070DE5C89F1D8FB9EA8C138EC7CD282CFFA
+:1015300085A44B89CBB2788BB44A403921EDE0FCCD
+:10154000929391890E6D7B5187F7F550F1B609445E
+:10155000A24CA9E66AFA9AD371A0A74A1DB49C4985
+:10156000D7B55A90B3E8775BDF4F46FFEBC30E4920
+:101570003957C3EC2FF9510EF53FDA2FDACF720746
+:10158000C51BDACFCD452C2ED050C4FCC91445FC68
+:10159000381FE5D9A1E47DA8E3B5115D109E3A8E10
+:1015A0003D1F168569F1F43BB5BF0E7D8B09E22D19
+:1015B000E1E13A8C679E377866613C30B59080BD3A
+:1015C000D8616D59358DD5230F3D6F0E7BB1FE3B34
+:1015D00002331488940AF3BD41D90FEDBECEEB8AD5
+:1015E0002D6BF313B4F77ED411DFC8ECBCC1F760E8
+:1015F000DC50C4E4E1F94EA7B22F6E8C9777E8A5D2
+:10160000DF38413EAE16500EB70D6370D30D67CF75
+:101610005CFBE4592887ED543FC5F9B2F9E77EC772
+:10162000C101FD75D8197E7DDB796BE7BBB4A810CD
+:10163000F7AD038C063A5EC76ACECFE0C5E67DA95A
+:10164000FEEA278AAEAC9C3AC6B9B70701CF2CFE9A
+:101650001F81DFAFAECD28023F3BCD29F4BF9A47B3
+:101660007EB669612A968FAE2A403FD000DD9E5C2F
+:10167000B918EE33B9D47C8AE714BC7857E387AB4A
+:10168000ADE0DE837EB47007841254F9439B56DFCD
+:10169000543C15F863938E4899A00FACD2E4B3681C
+:1016A000E8798AE47BA508EC0F437F1FE353A1424E
+:1016B00001F56FB31BE0B64E776CE7CF015F769A0A
+:1016C000313FB26979783BF82B3325DF5E68776666
+:1016D000D9E1A99C84DDA19E74EEC048BC1FA7B6C9
+:1016E00043738FC7A3B1793464552ACBFBE88E7D51
+:1016F0000FF737C4B41B945FC3F4D6F5065F11D857
+:101700001793AE6379891FD7EB08E0C5C766863F9C
+:10171000F2635645CEB80BA3F5DADF6BF1E3313354
+:10172000E2479D72EE4DBB1F8D801F74DF1A14FCC3
+:10173000F8F8D5AB0B013FCEECBCBA10F063BDBEE0
+:10174000CB03F4B53BDF7718E0717C8AB74FC7F85D
+:1017500052E1E5E0ED4757186F2F55BF328D4A141F
+:101760006F91EE888EB7F4EA999F4C36C79E1BEBBB
+:10177000BD4CBF6A62FF58517EAC7FCC951F57BFEE
+:101780003299BF52BFBAFC75103C37A8C6617AAD1A
+:10179000E1C7B747C16B8999E5A32C291245B91454
+:1017A000D6579B87E710FF6872F77057749D317E9C
+:1017B000C037BEC85BD905F3F030BFE51B82D477D4
+:1017C0000D1DF70DC2FC96DA75DFA8C46154BB5B32
+:1017D000B503B5E3978C627AE6A4519E52B00B260E
+:1017E0007D7111FD0827E11E2C3AAEC9FF33B4E725
+:1017F000C87E4EC4738C128B8336ED9DF72CF85D3A
+:10180000EBFD4AFC721787F67AFD739F60FDD93DA8
+:1018100075586FD9CF05210EDA3C4C87725BCD7FAE
+:1018200050FD3FCDFB4BD1EFA3FA7FE83CC6805D76
+:1018300099EC081B906F817D49DB35092CBEDBE4F8
+:10184000206E1958ED9E58BF899A1FB5C96B407A12
+:10185000DFB49FF3833D9E61F03987213C87892760
+:1018600092237C63FA28CF4AC87352F3EEE0FE9FBE
+:1018700051E3D10F9A83E710F4EA7D2FB1F7F324F7
+:10188000C2E70509E986CC89C6B790260E11BA626F
+:1018900079CCB351DFFE6FE2457DDBA7C1B75002C3
+:1018A000F9D23C4ACD63BE15F57DB5FDE0FC7E3F27
+:1018B000CBEF1FC8CF6379FC0DD309E9B4B332DC99
+:1018C000EBD408F73AB999BC0F6AE47D7419F2E1D8
+:1018D00082517CBE41E8C77302EA3D4E901F17FD5E
+:1018E0007D139CDBC963797231FD28FC3F93BF07F0
+:1018F000E35571E2C47744DB4B8754BBB0543D17CA
+:101900001636803F6A499B230C718F4356E5BCBA5B
+:1019100092AFBCC41C3E06FE9A25CF67E279A201B5
+:101920007BE425A3E2EF6774DAC0FE24CD0B8FA21F
+:101930005FA219EEA5E022FB363DA11DF98B7C8844
+:101940001F1D1AB023DFC987F363AA5C687033FEDA
+:10195000D6B08763E70803B1E7C85E1E7565E58406
+:10196000FA5DA2F6874625B24BBF0ECE0CDF0F25DF
+:101970003A7FA7F075158E5ABCBF5CF8A9F503F045
+:10198000A37C08E583067E5ABF9FEABF231D22FA87
+:10199000F7A80E1580FC53D57F77A9F2FB43054EBF
+:1019A0007F6FF94D4627E243DF6E7F12F1A3CBDD57
+:1019B0009741F21BF6A724B1FCCEAFF83765DEDA0B
+:1019C000BC0965DE9ABC8943FAF00C760F0B858F53
+:1019D0007370DE4442FCFB9ABC896FB04E4DDEC48E
+:1019E00057AF539B37F1CC81A76C105A84F38BE02F
+:1019F00027E9DDA6C77C81A9BCC5C3F2D97896FFCB
+:101A00004A3C785F6FB3C98CFE106DBE1FE5542B46
+:101A10005B401FAEA0760A9C97DAD28E7A4463367A
+:101A20008FBE55C86F14A538F9A4424D4A501A9C70
+:101A3000D706E70BF05E8BCBCC6BBB66B4D581F2DF
+:101A40005722CE6F985F5A3D1AFD0F5F9DD7F65C07
+:101A500001C3FF372D9FA545DFA75B552C13885386
+:101A6000253A0751339A1BC85BC6F38A824CA2E51C
+:101A700071A276B34733FBEC4D43F8FD00E881B427
+:101A80001B88D36619A8F55F16B9AFE13697F7F64C
+:101A9000D1E9A83FE1FE9EDDFB078C4F3C934D440E
+:101AA0003897F08C5EC67D96D309E2B59A7FA18EF9
+:101AB000734E89A35D2AFF593CFAEF2B171EFFBF17
+:101AC000CE7706E569317AFC06FC06E96F809FE86F
+:101AD00059FC4ABDAFE56BE5DC95E6339AFC9244D0
+:101AE000EB6A065AA4F8F3CA68EF8B8C8E3CE817B1
+:101AF000BD5CF9975C46F52180C72EA304A466520D
+:101B0000EE65218F66AB7E5C769FE79AE1A82F7F1A
+:101B10006C66F355EF9B51D7F3B6163FBFA5DDFDBD
+:101B200078BEF7E7405FC72B3D780EFC612BD3DB17
+:101B3000C2CFB33C7DEDFD29946ED87D32CABDE0A5
+:101B4000DA7B20FE38FA1F23BF2F8CFEDFD1AFFED9
+:101B500051F2FBF2D7116B7F1FB2B23CC888FDFD7A
+:101B6000BFB6AECB92D76A5E747955BF129FE008BC
+:101B7000C427D4719AFBD9B9A2A1CA7916F5FD8DF3
+:101B80008A5E7867B167189C9F292B0B3E0DE76B27
+:101B90009A880D7FD7A02970FF8E5F39D8F9662CFF
+:101BA000BB587C95782D785E3FADD057588CF41B90
+:101BB0005A09F439C241CA21CED1E99A49EA2C988E
+:101BC00037310AEA472C0F3DFDAB32CC1B6B017A53
+:101BD00055F3A6CB2F7EB6725A19CE17FDD50E63DC
+:101BE000ECBD333716337B507D4E53E64FB73D1B6C
+:101BF000E67366213BEFDBECF088E0F756E3F4C9CF
+:101C0000523FE63934ED62465139D88A50FFC03030
+:101C1000A4AFA65D95A510BF25017329DE07FE2799
+:101C2000760FFF996543D03FFAB2CB5709F3B696CA
+:101C3000F9AF07BB7F041D07E2BC67765E5FEA8BE6
+:101C4000C33733F95419E2E0993C093C2946F816A8
+:101C5000B5F767A37F7B6518FD6EA5C5EC7DB383E3
+:101C6000C9F5E6FD35649E2552B63862CF8B4D1A14
+:101C700035A514E6515A2C2879A42C6FD549D530B6
+:101C8000F0736AF1C9A9E4ADD62879D9443645F292
+:101C9000B173BF3E6F559D9F5A56F356932F30BF79
+:101CA00043AE68C03C17EB2AC657C97282718E6B6F
+:101CB000C3FDD529144EF9DDC16B014E290076BC58
+:101CC0006F39F4C858FADE91265C0BFE9BA75BC700
+:101CD000F582FE2BACEEFF0E6C89D42556814B3479
+:101CE000ADD0DB887824B4B8802F55FD4ECFCE55CB
+:101CF000AD4E46BDB23BA701CF559D3D6C8C7B2FB1
+:101D000085FA94C98A2C8893E4AEFA77CC63B0EE56
+:101D1000E2E29EBF7BB7D8A29CBB5A91057117EB3C
+:101D2000AA7EB982F69FFB184714333A9BCB027FF9
+:101D3000B6A003F95AB787DDCF58D765AF32A1BC3B
+:101D400061FE2572AD03E588B0FA461DF009A18D4C
+:101D50006AB1749D6F17B3787A41B7A80339F5AFAC
+:101D60005FF271E35E4F1447CEE700B81A8DE1BE13
+:101D70002C67242F493D97A3FAA706E4CFAEB9E814
+:101D80009FBAFC3CF4F0ED98E7F86506C683A6DB45
+:101D9000983D420591723F516CFB41F713297A8BB4
+:101DA0006A176BE9409BD79D5F3104E982F2D1C08D
+:101DB000263186EFC5CDEF6E1598DE4DD7615802FE
+:101DC000F3A8CC72833FF152F3E9B5F6F4809EA3F9
+:101DD000E825EABCBF69FEB95ADF0079E771FC1F4C
+:101DE000AA5ED3A19E33FF92DD1F3742B1278E76C4
+:101DF000FEBF12764FA79AE7E267E754F4947F227A
+:101E0000FE84AE93010F76D9754DC5180F6BC27E57
+:101E100056B3DFFF18B12A6F4545193C45C25178CA
+:101E20001FDDB76804C69B295D14C4A18BC5C5EC32
+:101E3000FE06617532E2B1B09660D6A660CF403C36
+:101E400016D6317C5DA4D0BD9A67A7C62DEF2CF6BF
+:101E50001D2B4E8FBAA7A53589DDD3A2E4AB5B5B02
+:101E60000FBF04F79F3CADC4AD7BDF183D13E38982
+:101E7000AB050EECC3F3F6B923C07F7756E1DF560E
+:101E8000A19F8896687AEDC5F38EB907D8392D41A0
+:101E9000C9AB15563BB6027E9A9D3E3CD7F99D8E46
+:101EA000208F795BE2F127A7496077840D906777EF
+:101EB000AA4D08AFB0A3FE14E327D3FABD8810C023
+:101EC0003C22DD982BAB47A9DF256A2F8D49A83F1F
+:101ED0007DABF322E46BFC53DF16AF13F9A72E7F23
+:101EE0001DDA7322CC3E216FB07CAC38EB8AF15FF7
+:101EF0005EF175A97E4B6D7EDD203A66FE0FD51E24
+:101F000052E325C423C7E4BFF7EAC520E83D904F5C
+:101F1000FCAA1BF4EA1F9BA3F3DFAE1FA38BBDB784
+:101F200092F8CD701F429D723E9A08EE5510B7BDD3
+:101F30009FB776817DD70EE71240BF04F87251E754
+:101F4000333EB0629E46ABC0CE6F10999DFF5832B3
+:101F5000AFE5C7D07E495BA608F097AB5A7E8AE70B
+:101F60003B74C4DB4E9F9F2BBF87A3CE473DAF90F2
+:101F7000487E0E3AAFF035E72DB2139CB758A0E07B
+:101F8000BDEB2E82E72DC82ACF569857779B40206D
+:101F90003E9D3A8D95470826FC7D2633E47DA7E1DA
+:101FA000F958CCCF0E5378429EB919F2BED3E03C1B
+:101FB0000CBBA7939B390DF12F95C207F482763D98
+:101FC000BB9753BEC582F8543D8DC55B53BD06E437
+:101FD0003FE7881BCF09C8707F9F03F06C05E2675D
+:101FE000D89A81F1E2D47CA6479ABD069DC9897929
+:101FF000DD88AF614ECDEB667CAF7BAE84F9F60336
+:10200000F774CE23B83FAB0BA666C3EF920CB9C9E9
+:10201000C0417C499533550A7E746F55DA37B2F664
+:10202000708F27CC8F2C61ED07EEF1FC3EAB6F1566
+:102030004278AF14D561947B2459FD92D919483F59
+:10204000BC722E97DCA69C2BE0D83D644B660F61DA
+:10205000F536C607C9DD498A3C57DADF9BEA57E205
+:1020600005EC7C40BD4EB9EFA08B44C79F553AD3D9
+:10207000FE3E4784CED8F9922722E704909EDBAF3C
+:1020800017310F52BD87B4CA6260E7CE4CB17435C8
+:10209000694C2AC3FB0AB709C65DEBF4FC644C5CCF
+:1020A0003F8D7F6E345F19A2F295BB0D1ABB2C9346
+:1020B000C1D5167E9A9D4F335E965D96380EFA7C9A
+:1020C000766C1C744776741C54DDDFAA8506E42BFD
+:1020D000DD76E92DC897DA44410BF73A6AD7BD6936
+:1020E000E07E76BF19F452AD3D7828415ED4E931E7
+:1020F0004C3F7427F0439C1E93C8CF9520AE5C6A7A
+:10210000FC5F8A8F33FEDB9BE03CE200BC54BDC920
+:10211000A48D7BC897E5F7E935FD10F9A0A75D20F0
+:10212000E6EB6859737E8EF241E48BF20AA3D8EE97
+:10213000003EFA43E48BADD4723546F1456A8E5EBB
+:102140000DFCB8F74117FEDED55B0FBAF179CECCA6
+:1021500005F8B1F00CCF018DE993970DDF83FBCD2E
+:10216000CF59C33970BF794A207516DC577E2E3D92
+:102170007C04CAB69FDEC1CA05E1A7E1BEF3FC9F9D
+:10218000FEF27B58061A1B42975B12FC9E5C0CF712
+:10219000EE8756F6837E5FA63977A0B97F19CEC742
+:1021A000C27A322D068C53672AE792C964C53F0470
+:1021B00099694077D9A598576821D2AE7EA81FC6E5
+:1021C000E42EAD6F83FB7DDB0B9C2C6E4E181F2025
+:1021D000C394BC131292C11FD5EEB463FB01FD6E14
+:1021E0009751C95B63E3BFF72ABB37493D6F4D8801
+:1021F000381CEC468B4462CAEA7DE6441087C3FD76
+:10220000C3ED6ABC5A291FC8F48D2A89B25FDE9BD0
+:10221000727F31ACF3E3DD0FE4833EF55DE577E2F9
+:10222000B478F5D7B14C8EAC48FEDB1CE0E3EFF39D
+:102230003637F80F9666FACAA0BF798EB6F1768A5D
+:102240003F93C54AFC3DAA89F26C0EF88AFD6636BA
+:102250003FFB642F37AF38F23B55E93E01FDF4C434
+:10226000D7CD83BE9D7EDC2B027C1A4CE11C81F60F
+:10227000F381C33709FA3D3FF7C3FB308F70C87B4A
+:1022800047E05ED4F7F45DD536C027A7720F36114C
+:10229000F01C50DFD0113DCAEF6DB1F340059C1228
+:1022A000870D4E06B9700361780B65A8BF51B987D9
+:1022B0006EAAC8EE8D9D5AE6C4DF4F9C41C202E073
+:1022C000C3D4F7BD3602F471B3AF2CDE3D1BEA93E5
+:1022D00064E9A568FAB95E8A2A13C8B7882DFF9306
+:1022E0003BB6FCCF155F8E8C2ED7089E3B60DDAFD2
+:1022F000734CFEC81398FC11496005C8C7175AC42F
+:102300007118577770329447BF3604F3A84816CB3C
+:10231000BF1865CBF53338E46D867585A99CEF71E0
+:10232000C0EFB0B1FBC532DE376C85FB2088246D71
+:10233000063ADCAD77619E6986A5F6676DA8CF5831
+:102340004901F2296933E2B5D524C1EF961CB4B234
+:10235000FC89F6B53A8C37713693CE43BFE37B04E4
+:1023600026FFAD0BABA19E2FA71B426575AF9DFD50
+:10237000AE5BFB78A25F510AFBE67E1FF522AB093C
+:10238000CF274CB6B9EE807ADE66C0FB2B0E5ACB57
+:102390007DCA7804FA7FCEBA10DB038FD653FAEDEC
+:1023A0003533FF3A4FEDE3156C7CFCFD46FE1EA273
+:1023B0008C6F220628D7123C6FD06B17D97CEFD5D3
+:1023C000613C04EAAFC3F999B05EBDCF3272BEB7CB
+:1023D00052C0DF21E088121F6BC3F2530A1F6CD773
+:1023E0008B07014FE58F0881FD986CBB8074C0EBB3
+:1023F0006C6EBC1FC843F21D1984F92CE8F77C866B
+:102400001884FC7BFE1E1BDACDA0F940FD50F813AA
+:10241000E95AF09072C53583E3798E021E8FE08809
+:1024200017F6E354492EF2A36775EF6DC0FC0A8BD3
+:10243000D7E8A6E3186E23B8BFEEE4F8E77AF7967C
+:10244000303A1DBC7FE55990C7C1D92A2478B65BC4
+:102450002B2438A7D46B776779A3CA71F6C50F7898
+:1024600013D91753505702FBE19640BFF8FAFE68A4
+:10247000BD05D623E1BCF8216E09ECD07C1BED87AD
+:10248000F27D775AFC759C52D61150EE2DD4D6FFB2
+:10249000BE4477A5D7A9C1BF6FB9CE8CD8755EC130
+:1024A0007986B82B304F3E87CECF12991FFD13EFA0
+:1024B00051BBC1A243FCBA41BD1FCA157B4E447B30
+:1024C0002E8490E51B81CF7C57C977AD4AFE17F467
+:1024D000E35F4FF57C906B7DC93FCC877CD3A92906
+:1024E0006D1D8C385ACECC037E6CE290EFDC4882B6
+:1024F0002BE1FDB94ADF33F63CE4FB7F2B190FF7E4
+:10250000E9FA46A6D2F2C7FAAEFCC54EE48B1781B3
+:102510002F5A4818E9EE06F8BD46A0BBE9FE0E2882
+:10252000D3315AF09E304A8740B72A1D0E9E3FA5F0
+:102530004BFAFDD0161B9EDFDA428278002F8B7497
+:1025400071CCDFD282728B48C323EBA4443BD5D439
+:1025500082EBF8799B8CF2E1BBF6270528DF5CEA79
+:10256000738CA5F39A35F613FCBD0792357724D802
+:102570009D74BEE963FF81F31D7CAEFEABF3C8FE24
+:102580005EF6E884B1B1F6A823E96F9807277136A3
+:1025900037A1FAE3807DAA37615E42E41C72B80E6F
+:1025A000CF3B73295E9067EA39642DDF9D741DE38C
+:1025B000BB1F2FB6B957E03D923BD02E6DBED9A2BE
+:1025C0009E5346FDAB79A14E39A7CCA15C6922266A
+:1025D000BC2769E0F72CE93F2E23F2BB34FBE0BCBB
+:1025E00072D9579D5796F03CB4BC9CC5E907ECBB2B
+:1025F0004691D9AFEAEF9BDC9BABFE0E05D3531699
+:10260000934BB26FE39C6346BD91A4E814FB95E93C
+:102610000BDD13245126185F657AF86C03D6AF4F93
+:10262000F2E3EF05D5F15D88240D63EDCAFD0F7E61
+:1026300033FEAE98C15D087C428DB3EECEF7358F88
+:10264000A5FB34AFD893C3D1A5D41958FC94D2C1FB
+:10265000E67EDA6A1A69790E7E6FEE7AD2F25B5DF7
+:102660001ED2C1BDF0FDACD19FB0DFA18BD0C17D2A
+:10267000400726C2FC01372871A2D73FDEDE01FBEE
+:102680007E8E23EC3C9A4B7B1ECDFBC3B12C9EA5CA
+:10269000FC9E542CDF899AC7713D9B8783E7711E8E
+:1026A0002BE3CD63101D123F8E4FF7B705CFCB6BD9
+:1026B000F0483B1F6EFFFD789E6FF3ED44E42780EA
+:1026C0001CEF37033C870146E4C13A7DEB609DD99E
+:1026D0009062099354ECEA41F3E62DB8AFB7CE1EF1
+:1026E000C8D399915D0E712236EE53C94DEBC0EF00
+:1026F000D17CBB1EF97BCDFE31A8A7F5C94611924E
+:1027000020C964965FE3A6FF8379CD229E2976DAFD
+:10271000CF4D620DDE0B77F3746D5E8EFC500B6D4A
+:102720007F8B92E773EBCDFAA3D1FAE639FDA37A5A
+:1027300080835C6769E127427F42A4BD73305C06F9
+:10274000DD4BD5C1F813A17A0EF4DF5E1140FE9483
+:10275000884FED1D3B709FDCC86F98EF73702CE2C3
+:10276000ED57E7FB6C57EEB17A4B1FC6FB51DF4EBE
+:102770005FB079315DE7C81F15E3EF1B4FC9A87F34
+:102780006E2D2DFF78D3282CBF9D71FBD2F7A0FEB4
+:10279000E9422C4FD67D3207E8C1553EFB06F85D75
+:1027A000E8B7CCAC9FAC245F770DFD2EAB24771C33
+:1027B0005C6033D910C6EF6E1CDB7815F8632627F2
+:1027C000B1F2A1D23F8CC372AE521EF7FA2828BFD5
+:1027D000C57D32271E5F1CEDE2824554DE4E4E65FC
+:1027E000DF4F1FF7FC10B0E32757B1F26877E5EA37
+:1027F0003CA8D77D3A279EBE7456E1AB93BE38D72E
+:1028000091E680B030FBBDE2D73C1FE2EFCB78A968
+:10281000BC85FB06BC152C0EE7F5940AF07B6655CB
+:102820001E56AEB6B465031F9CE1339441DC55B42B
+:10283000383B44DA2EA5A2723CEC7B3555B721CE4D
+:1028400049E9EB53A4AFAB3FC9B1A15EAAD297A8A7
+:10285000477A4F7CAFE4E76CDF62E981F6F705CA9F
+:10286000CF6B62E5E7207AD5E0E1FF008B7F42C5C0
+:1028700000800000000000001F8B08000000000026
+:10288000000BED7D0B785445D2769F3973CB7D429A
+:102890004248088409F74BC01912205C1D02645994
+:1028A000050C171514E1041002B98DE0EEA2EB9AA5
+:1028B0000901441777E38ACA2AE88080A0C80E0A73
+:1028C000C86A644764237EBA1AAFEBED631345E52B
+:1028D0004E0CA2B89FFFFAD75B7D0E99338405BFDB
+:1028E000CBF3ECF7FC3F3E3E9D3ADDE77475557542
+:1028F00055757575CF55CE4EE15FE60921FC891EF1
+:10290000473E95BD6D271A7B0BFEF74357592A6941
+:10291000427410FABF9521457413A2930870B95EF2
+:10292000D42A421562B2558BF70C12C26E6970E35D
+:102930007917C5D3D745CF45BEC759D41F2F764A7F
+:10294000FEA29F4053F1C395429CB67D922D5285C5
+:1029500008D00375383DF489EEA9D48F82A66ED9CC
+:102960009595E04CA35FA1B85C69E857D62B757FBD
+:10297000E5F7D739E8FD0CEEBF93A73DF093F8AC2F
+:1029800057FC5CBA84F6B8A0F155A40BD73D5EBCE9
+:10299000DCB8324CEFA5D388EFF110B8D73CDE9A03
+:1029A0007CCFA264F5427C2DCEE65961FACE3491FB
+:1029B000E851E9FDF79616B5F712B2D709BF0DE356
+:1029C0007D282E31904CCF2BE724041DF47C670723
+:1029D0006D00E8A15A022F36127CB3F0D9D16EB245
+:1029E000D577059EC70BF9BD0AFADE3D289D448FB9
+:1029F0003C898723A30D7A44E1193DFE56BE346419
+:102A0000A0CC107E86D3856795DAC67884D57F778B
+:102A100023BDFF0B35A1F61E2A1FB2FA2C1BA8FFFF
+:102A2000C0EBB6E06685C72380CFD24F12363AB2EC
+:102A3000A9B40A8685C7C1F54B6E26FCE9BD254AB7
+:102A4000962740CF6B12FC8FE17BCDD556B1311567
+:102A5000DFF76D00FC7A757781F1458F27BDF6A70A
+:102A6000424BA17AC5FF04DA05AA1DAECDD4EEDB38
+:102A7000D87FCCDDC874482AB265111C3369432362
+:102A8000C18ADDE9528869E973D2595ED7DE427C9A
+:102A900020FE050A42DDE603EF475551E38AA40311
+:102AA0006192DD2A9FEB3D44B4F69063831E0105DD
+:102AB0007269B728B38BE28926F877656BB9DE6354
+:102AC0001182F8D43DBFA30FE35EE2151EC80FD1FB
+:102AD0004101DDC55E45A703C913EA15973FE0BA7A
+:102AE000904F4B1BB36F45FD7E0BE14B6501F12B06
+:102AF00005EFC7A9F27DC5D32199FA2F4812FE1020
+:102B0000954B62DCB746D275B8C532BB28477ECF3D
+:102B100049F49BADCF0603CF396B55A1E50A31C609
+:102B200039F7B1C3B9C0775887A28488FA7BFAE431
+:102B3000CCA1F75FB689E9F8BE677FEF9CE21C1E67
+:102B4000872F94C37C5C1102FEA3D33D010FF06B71
+:102B50005EE1017EAA68DEEC011E014716F089C91C
+:102B6000F40404F0AC15B7E545E01F43F803BF3BA0
+:102B7000C6F922C76DE07D313CA3E97D313C2139A6
+:102B8000CEC154AFCBCD1C675C933200A51A7690B2
+:102B9000888A55D4AF33525F45C9B90830DF272E34
+:102BA0001D537498E42DD54E8F20A7B725043712F6
+:102BB000FE136F1BCDCF9529E7589EDBD17C745057
+:102BC0003966BC5B69243CDAE5BD6515FD21A78447
+:102BD00017F0B1360E9A4CF43DD6557B12FAC6C0AA
+:102BE000FF2F839EF06A547FC8224A4239178E6FA6
+:102BF000B72E4F2ED16887DC5538E3C3EA800BE54A
+:102C0000E562F8BFD8A1E839E88D934AC36054560D
+:102C1000F676F17321B46C7C2FD9953D3A197AE29E
+:102C20007BEA6F30F414FDA379D0B7BBF627BC77ED
+:102C3000BD281A67A5F1B61BAFD9341AD738359E0F
+:102C4000E773CB7685F5D5585F8C0574A93C680B86
+:102C500006095EFCAACA745ABC5E0D62D2B608CFE1
+:102C60005ACCC39680C305B97C286EC06F4750F913
+:102C7000D97A9BC7817E03BEB77B53BFF3743EF501
+:102C80005A6B116E832FF47F9F60AC70F76E85FBDB
+:102C90006D6D6782FB873A9ADA5FB1B7ABA9DE1B2D
+:102CA000EE6BAACF3D38D0040F6A18666A3FE48302
+:102CB00002133CB4F12A53FBE147A698E091CD37CB
+:102CC00098DA5F796E8EA9BE34B1B07E298DB73E99
+:102CD0005D150AD9C9D1A2D4D4BE542DB30B62B1AB
+:102CE000A8B57D0A79F4D37FCC4F75A615743EBB89
+:102CF000571129A48F16AC95F5C67B2575F7AD84C1
+:102D00008D5B18343F2F15D65618FAF793856F1E32
+:102D100088E8AF576AB12599CABF7B1252212F624A
+:102D20008818F283CA7CF540DFB4BCAB7A1C42370A
+:102D3000A5042F7E5A09DE437CEC297A3C04BE119F
+:102D40009F45D00DBECAFA96756A3040FD7C5B5532
+:102D5000F2E6011BC10773D7422F2F20BD0CBDE542
+:102D60004837F333C66DE6675C6F333F133C667ECE
+:102D700026E59BF999EC33F33365BC999FED8BCC39
+:102D8000FCEC30DDCCCF0CCDCCCFCC12333F3BFBB9
+:102D9000CDFCECB2D4CCCFECC022537DB4FC765B3E
+:102DA000B5D854FF50DCBE2F34A2436A47D5E5A006
+:102DB000A9D7A3F676D3F7843AC1BE82E8559AA97B
+:102DC0000AD5D52A0701FA4FCE6B3FCFAFF92407BA
+:102DD0000F131FCE8AD5F599EE0BE5A162EF7D7634
+:102DE000CCCF1F2B0FC3BD663920B94BD2DAB06BE5
+:102DF0004669F099FC91D15ED20FD3BCDA582FE925
+:102E000093E9BDBECAB292DE1045C5BD60472EC76C
+:102E10004FB10EFE117ECAA410DBE38BFA29EECE71
+:102E2000ADFA8F9DBF80057AF9C3793696DF65715B
+:102E300003B6432E3FA8917279064D860A71830826
+:102E4000B11FF661EC239DD15F01115C198ACADACA
+:102E50009B80FF4CE04FF6EC26D168C3C7C98EDAE1
+:102E600051160B37977375FFEC66115E89C17C9222
+:102E7000AACD075D2A54AD4B1AE8D1A9218BFDD804
+:102E8000D75380F445E96AE8EB77F027B57BC45B5C
+:102E90005481EF8C71BA6F7DC00D3F80EC03F1451A
+:102EA0004C4861BC85B5A8FF94FE6D7D6719DB8B2E
+:102EB00017144D03BD03194E0FECAD480F3DA3D0C1
+:102EC000F8FAB6730FBC27B9B5FDAFBC867D21C734
+:102ED00086DA3FB92B96E9D5AFC3867618D78FED42
+:102EE000F76EAF6F39F036DA5F6ABC76BB67D1CF69
+:102EF000A8DF6645F8371212EFEA7CC974483F3103
+:102F0000534DF4D4806F71B3EADB131D6EEDA0FD59
+:102F10000EDF9F7EFD4F570256F6A7B817137EA708
+:102F20008B1B07035FA2FF83A82F7312FD6968271D
+:102F30003B6BBD9220144592FEF447FFA236F197F9
+:102F4000F81CD0E9FF6207ED31C8F57E4B439607C8
+:102F50007CB4360C663EBAE4B84EDA255D2E468760
+:102F600082B8CE3341FF790E8747257A1628F2BB07
+:102F7000879366CFAA24BC6FB614A5855513DE4F80
+:102F8000A3BFB2F8E22E19C0DBA6E3ED6CAFD3DD30
+:102F90009D13E99F45E35D83EFC31FFE15F997D9A4
+:102FA000781EDE06F839E1E2F58BC322ED7273B5C7
+:102FB00012DC48F56FEA745E6FA37698974ED1AE37
+:102FC0009AF0BB66E48A0D68F76BCDC9786F169EE0
+:102FD000BE6BB2C10FC1FA3EF32E2558930DBFCA86
+:102FE000C3723F4F1465EDA276AF79B57AE0FFB7B3
+:102FF000B87F0CCAB6F0341EF42E7D67CFB20E9E99
+:103000007B008DB83CF9EF4D9A03FD4F9928EDCE2A
+:10301000CD3ADDA689229EA7C6BA8926FCC90A6ACE
+:10302000379DFEE2F59870F7077E33007B5BE7F58E
+:103030004CD1C0E52CE1E2F5D4DBD51D7E761BB585
+:10304000996269CEB2AB98A7346FB399FEFF0EB9FF
+:10305000F966DC5B8714D0FD0ED263E0F79AF69731
+:1030600025C79315494F9AB79FEBF3360F53EBFCE7
+:10307000FC19DB5ECA9FD5D5E39FCD1F528C891901
+:10308000E4AFFF44AA42F1D09944914AE36CE8AA24
+:1030900006B19E1AA7DE61DD45E36C207FC2817117
+:1030A000FB8A3B9EA6FAF1646FEF91FA352140F05E
+:1030B000249F2AEE6139685CBE909EBF9E4FF5D476
+:1030C000FE956A919047F02B5E9BA786E470DC39F1
+:1030D000ED4012959348EF87A9F555E9F78D857F67
+:1030E00030BE13D991083B715577334C13A113F8B7
+:1030F00074B54EEF093966BB330976C768DF86DDE4
+:1031000021FDAA82BE710375FBD357F485FD79B901
+:103110006AAFF88CEC8B6187C608B9DEB8981DB22F
+:10312000DA0B5206B23FEBB6637ECCC1FA04F476FA
+:10313000691D2747CC97D2210AF3C94D86C742E3C0
+:103140007FF3A01A047DACBEF070D06FF18B0ACB78
+:10315000E9D503B5AC81C48753B6C6F9909B8611F7
+:10316000B94982FAFFB48A10E945F3B7CA297C3419
+:1031700017BEA872317CA42A9DCB63556E2E4F5486
+:10318000F5E6FA53551E86CB0716F5027E73567D7B
+:1031900065859FEF167EF68F96D07A17FC5A92B00F
+:1031A00058C236A70B4AF8AECEF5963882EF0A2AF7
+:1031B0001ED8C585BB822BE308AFD23A9F3D9EE067
+:1031C000259DDB8D8947FB071496FAF907FDF51855
+:1031D000EEA9773FBD6EA2681D6FF93985D7C9EF9B
+:1031E0000FF20D46FF5F56E5335E47AB7C8C97AF21
+:1031F000AEA93E85BE77BC6A3CC3770D2C1A81719F
+:10320000FBC457EC474CDCDE64859F31CEA7F8C089
+:10321000E7513E110C12BDD6DAA45D594B76057A02
+:103220006074FF29EB6F15D0FB5A21DEBFB6DDDCE1
+:1032300071F05727E517B3FF7AFDF782FD5743FE7C
+:103240002F358FDCA2E15426F5773220E9D3B2EB9B
+:103250001D865BAC441F1AF1BE5DA5A582FC83965A
+:10326000736FCBE7D48EFDD4DDB2DD629B6CB77893
+:10327000F7AFDBF9002BA25944ACB78E131F85239F
+:10328000027EFA17E95A847C1D6F17FAE623E8C913
+:103290007FB77836B29C6A9F3D0F3DBADCC57AE6AF
+:1032A000942DF4C5C3D0B39DC9AE72BD3F6E0AC99B
+:1032B00059855D682C7742EB07F878ACE0F800FAA6
+:1032C00073F792CF218F3D773CD4F597EED6FEB6BB
+:1032D0003CFDFB96E7DDA80FF2FCDFB6637DC74738
+:1032E000082ADBB92216787D76EF7399185F2F557F
+:1032F000F8559A67737FF3C7CC3F52FF4F906E41EA
+:103300001CE3059BE7D45EE0B39EF0A1EF3C716F38
+:10331000F940E8B779BF5BD817EF07065A98AE4F68
+:103320003DB793ED3FC998670CE9A9FE6B5E5A96CD
+:1033300041EDAF58D764E948A577935283B274FB47
+:10334000CEB7ABA9BF5C97C50F7F74C54037BF3FF1
+:1033500030B461A302BDFEFDE31D31CF72D67C55B2
+:10336000D0515CDC6F782AEB8396621E572D8F6BF1
+:1033700077DDD4776E14F04BC82301BEC5760FDB22
+:10338000291AB60DFCDED56D03DEDF6309B0FD0939
+:10339000CC917ECBC9A2C0EF31FE726A1F20B8DC8F
+:1033A000DBD0741BD597277715883B1C092E998194
+:1033B0007A9ADE2ED0A762D703851D093E3942785E
+:1033C00014EABF64F79942B66F9DC9F7C6F776D580
+:1033D000A4DD00FB96533048A5FA2235C4FD894A86
+:1033E000D95F65DD4EA7E0F5BC68A792224CAE1B05
+:1033F000FD7266047F2C8DBFC9B6D2F7DA937D04C7
+:10340000BE6BB30319FEF8567BFA9AB7680BEB2331
+:10341000D7FDC5F8CEE78417FCADCBB57F768B7FA3
+:1034200021E3932E5C81A1ADDFED6C092FC43848F8
+:10343000DA5D01FACE6657C30C6E47F06FB95F6D67
+:103440000FE65FA64A544F95F6BA06FDBAA6668106
+:103450005F97DBFF4371FF60BFABD292E871E4B5C9
+:10346000FA2DD3536A5E6C247E6DE8A0EDC7F88C0C
+:10347000B8A4B07ADCD0E3810EBE97F1BCCC49761B
+:10348000D5C2F6F415C0861F7CDE0F735E9E3DDD4F
+:10349000D9C1F717A6E365B677EB7186F37AF5EC39
+:1034A00040935EAD49B00B2F3DAF59E3E0B884388F
+:1034B0006029ABA7F5C7487CC2D2FABD2509033BFA
+:1034C00040DFD708D126BDF6D17CD688B661B203DD
+:1034D0001ACDEB51E79A558DE77DC3CB4979D09F43
+:1034E000C297E0461CC022B4087B17FD1DE2D70935
+:1034F000F06BB488135A84DDF489643BE6AD886FC1
+:103500007799E30E3F6EB627FB1F8F1CF788960F47
+:10351000E2E052113D3AA0BCD8B85ED4C7F5278C82
+:103520008BCA79438AFE01FC467EEDB2627C23ADF4
+:1035300093B3BC5D196F6B2EF53BEA6B8B19EFEF04
+:10354000634DF0E5E2FF3385166A90E3AFEC1C179C
+:10355000AC83EDA771D42DCC0962BEEFB18B801383
+:10356000EB982976F66BEB1202097D51AFB84288D1
+:1035700027BD606B9821D739C2B5D90BF97DE3110E
+:10358000C8FF0D2D7605F1A98E0EF105FC25A126AB
+:1035900089CDA911DF6FEFE2B885EACC5C8FB86204
+:1035A000DD50FDF90C3B3FAFB109B67B8119B18C01
+:1035B000D79A64FF6BFDA97E4DB58C677E2082ABE8
+:1035C000BAA2FE0E95EDC070CBC6CD0F621D333989
+:1035D0009DEDC69AE4706625DA2FECEB09903CEC81
+:1035E000F987CAF6608DD797D12E1E7A50C605D7B7
+:1035F0004CF665C4A6A24CB360BC1D49CFF3F36C76
+:103600006A47E54736D9EE439D6F44E90CE8DB870E
+:10361000E7F510D03F57E7168CCC65FF47C63BAFA8
+:10362000952C10336E7E80E3AD0F6B6A50CD065D36
+:103630007E736F4F826F98A3BA1077BBB62486E370
+:10364000A1D76A7A3C749A390E7B75AE6F642EF1FD
+:10365000BF3CD4A7DBE108399E71738F9F433F7C49
+:103660002A645CFAD769DA38B4137BBDDC6E2F3973
+:103670002B3FC04E38DD03D87F9E67AC1BC3734120
+:10368000DF7DCD4EF64B2F260F42789C7DE9FB0F58
+:103690005A4408F2DC05FC4961B90DC06F0B846225
+:1036A000580EC64F71727CBD25DEC2FB0C8F11BF58
+:1036B00060DF02BBE53E03294AE6DF83FB3AB35DE8
+:1036C0009AADEBB19AE9B1FC5ECD4E5BD0023E2BD8
+:1036D000C16D5BF0DE8B316C3FCBF4386FD9F3FDFD
+:1036E000580EF6D87DD92BD0EF3E07F3B92CD19DDB
+:1036F000C4F5FF962250FF821E772E8B0DF7443CB7
+:10370000BB5B7B6D3EE84172C771F932BB7C7E28A2
+:1037100058C0FB1A82FC95B851040B1FEF4F04C828
+:10372000AFD9EC91FC035E5A4DE78DC057233CC0E6
+:103730006771BB8C971FA2B98CF11DF27766BC94A0
+:1037400029E3336EA6FACF16C7711CF55051FD5907
+:10375000F80187D2559EF7A4A1EE1D42F564731BB4
+:10376000EE21B872E1A76F0CA1A715351F66ED75A4
+:10377000B7D27DE6B2F20982E460E6A23B2689C4B4
+:103780008BCFD799650EAC115BE7B7B063B12661FB
+:10379000D2EB6B727D3590C350AEB612E3AFCC2145
+:1037A000FF99E4E894BDE151C4498EBAB5BB517F9D
+:1037B000FA8F5F6EC173616DEEC9F2E16C2C449CAF
+:1037C000A5CC22E344A3F3B4DFE6B29D4D64FE55DD
+:1037D000861CCCBFB89C06A917EFB83C7B70AC6EBA
+:1037E000F31E85FA298DADABE0520D0E80BD3AAEC9
+:1037F0008413956E4C5F0DF3EA842B9C08FE6816CB
+:10380000E9BF956E8D1EA7DC4F2CC51FBCEE0CD9F1
+:1038100087135E8B48F53EECC2737B6BFBEC563E28
+:10382000D277988F22FE9359BF44FB6D7D06DE430D
+:10383000742F4DDEFB9BE1D917D22F1A36C67321A8
+:103840003EFA3C290A27629E1C57E43C3921A4FE1B
+:103850000A6C8DD1D7FF128F537FECC078A4E9F3A7
+:10386000E894A2B7DBE690ED48F6E0CF94FE41CABB
+:10387000DD8336CF5AB9AF66657D599A22E152474A
+:10388000BA0BFE5647356089855C56099E2F841B0E
+:10389000CFCBE33B32F97D43AF892221A0D74A77D2
+:1038A000646C947E9DBE0EC600A8FDA2A7647F80B6
+:1038B000A1FF8F3D99A9F72FE753345FA3E9F07E6D
+:1038C000AE8C5BD5240CEEF0CFE295BDD33F5E0706
+:1038D00015F4A04DCEEB4082B423E4B7A44FEE8F95
+:1038E000FD06BBE9BBA712ECB37DF1D877303F37BB
+:1038F000BEF769AE5C477689E27B47B5F925F84BA0
+:10390000E271C17A221A8FA3788FF07DF2C9F37C1D
+:103910005625DF49900CF97233FD840DFCF9D06E09
+:10392000F0F1D64CD2EBA5A055D7563AEEF16A99F4
+:10393000B023A7F47DA33DC904E7C0DF92F6C3809E
+:103940000D7E44CBE9B20FE767629F2A2D4FAE0F81
+:103950006A6212078824945941E8816AA22BEAC955
+:103960000EF27EDCB1AAF1F71FB6B58EE78B2A9F67
+:103970008F4CD07978FE5AAF13F373C13AAF734EC0
+:10398000043F6AB6E61E7413DD4F6CB562274BD454
+:103990005883BF19968AE76A2820B8DE097A9F887B
+:1039A000DFFF06DACD5F973C508DD04F0BD68EF3FC
+:1039B000CD8BE043BFAD66BEF40F99E12BF69A6163
+:1039C000377832E8C7BFE70D9BE1DC8366F8B9FCC6
+:1039D00066F507D8A7784BD0A9A06C517F807E0FE1
+:1039E000AA41AC33BADC51347522C147D6CDF5803B
+:1039F000CD0BDE5B3618FC3BB9FBAE3DE5F4DE914A
+:103A000076160FD657C745E8FD89C48FF975F7D9E3
+:103A1000AD6E8CD72CE77B2CBADC3E29E37A0B8386
+:103A2000E6FA0BF543B51E4712BD23E52A9AFFD4EB
+:103A3000EF753E42AC6CE9D4FBE1FF944C2081274A
+:103A4000FC8686EEB38BF8CBE927C072634D14E198
+:103A500074C2AFE9AE048EA70C5B3A467C46DF2BFE
+:103A6000B7BA0663BF7D8E5371617FDB889337EDF4
+:103A7000CCA8803DDDECB278904CE1CAF7D767E680
+:103A8000613D21422E0FE2F477AEC43ABEC49FC816
+:103A9000F45928821C679FB3DCD1AA1FE9FF79ABD8
+:103AA000A3F05913514FE32859676EBF68D30F8EA7
+:103AB00048D858970EABDBA062BC37EB78AB0199C6
+:103AC00037304C8F3F1C4653B2377FEB56549C87A0
+:103AD000F66B46CB7AAB53B7B33E5EE795C7DBDDFB
+:103AE000ACCFAC6FADE4FD1A9A87B00F0713E6FFB9
+:103AF0001CFAEE8C53B81C9C47A231FC458A5C171B
+:103B0000F23E04B53FB34E61BB5E9E22E1F2C79523
+:103B10002062BAE508C2027E42C65DCB747A404E8E
+:103B20007C11E301BF2261516BC4BBC3BCFEADF08D
+:103B30000B0FFC00417CF499F6BDC3F623B0B30132
+:103B400025F4B017FE9EF93B957B7F7044C2E7E3F6
+:103B5000C5C4BA6AFE7E90E9A8DA850F7A5CBD33E7
+:103B600096FD763200B1B0EF36DDBF16AB82ED6167
+:103B7000AFD6C05E51B942F7C303F7497BB526D92A
+:103B8000D7D385FAFB323CA0C30D8ABEBE855F9FAA
+:103B90000CFF7A3FF7DBACB85C1B93D15E0462523A
+:103BA000D9BF96EB847FA86CEF9AC97FC7FEFC1A39
+:103BB0006F280C7CD63C90CDFEFA0B86DDBB3746D9
+:103BC000FAF317FADDEC5F89FBA5FFF891E0BEC5BB
+:103BD0009EEEDA863C92F3B96A116F2ECD5BE6CB8E
+:103BE000C077E74DB15BC00F517279FB1C9BF53C70
+:103BF00098661A2FE2EF8795A27A4B841FFC4C9EA1
+:103C0000B40F830B7C5BF4761EB49B67798BE93031
+:103C1000CF225C58CF6F3EA70A2BC19B6B1DC1659D
+:103C2000F4CABCAEBE9E8B73F09E8C371DF24A7DEB
+:103C30001F97277C41E87FFDBB2FE4594CA5182B2B
+:103C4000E32C8763A41CCE1445851CEF770B53FE31
+:103C50008551BE9227EDDE3C7B83199F4F5E66BE89
+:103C600090CD732D837C8F957EC7E15B14B6E734CE
+:103C70009E9E2E8207FF2E86E38587757B64D097F4
+:103C8000E487F3220CBD95ACCBCB9ABB83DB628877
+:103C9000DEF7D9486EC037921BE4F910DFD92F5CEC
+:103CA00033238DF97E83CE57716F02F36DB8C52231
+:103CB000E97C6F06D399DA8BBFE3BD716EE9CF5F04
+:103CC000E63A8CF8FE37F03D7A3D66F05B58838328
+:103CD000FED97E4CF9734FEF0990FC2FFAC303898C
+:103CE00082DA1DB5D6A679E8FDB2CD2B127D541E21
+:103CF000B106125DD4FFD1A03A3ED806BD3B0F52AB
+:103D0000F4F5902F11797415BA1E3FF6E47FACBC20
+:103D10009DF0FC4611CDD08F15BBBE5B793B8DAFBE
+:103D2000DEE76C863E3D626D2C84DE5D581CEFAF95
+:103D3000F660FE9AE3F28B9E7820CDCDF40E645AA5
+:103D4000D279FE67E2BD8A4D360FD67515EFAA1EF1
+:103D500037E6BD685E09FCA2DFAF0C7D6607FD5D3E
+:103D600016D1DC69781BF5A291F57CE5AE5F7FA5E5
+:103D700026A23CFA11D6179551FB0125FA7E49F48B
+:103D8000BE40C2A084D42F10F0D6F7A3893E9C97E2
+:103D90001020BC7AB0B8C83872CDB6870634C16F6F
+:103DA000D8F45AA292D3BA1F60ECA3B484E63E863C
+:103DB000B8EAC5E6E5A9A838B0A1C7DC7B1599B477
+:103DC0005827CB325B3811FE7ED9061BEB91B2A788
+:103DD0001FDFF230E4ED4387A7871BF0193BF44166
+:103DE00099E26B5658BF8B4465702BBF4A9FFEBC4F
+:103DF000F011F8D719AA9840FC5AF4EC59D9DE27EB
+:103E00009A63A87DE9CEA642AC0FCAB478BFB30DC1
+:103E10007E8D09BD646F8C6F835FA1A6428E536D4A
+:103E2000FB96F971749F223A645FF87EC986CFEDE4
+:103E300042AE0F9A539225BD60EF2A436AB13DE925
+:103E4000C2F6F4FD49CFE771BD0BEB954BF1F124C0
+:103E500068C1F29E2090C758F291233801FCDDB171
+:103E60002411F94F5F5AFD52EED7AF48839F576236
+:103E70000BA4B9B894CF4B1EFD19CBE302C59FE646
+:103E8000E2BC2DD2AFF93CDE0C8CF3E675D7F238EC
+:103E9000E70B8DE5B164BD5A14A4F2AC558CDFD9A3
+:103EA000C6BC796890D4770E71CB00CC93B3F4255F
+:103EB000D8F12FF5757DE06DB99E7688294991FB83
+:103EC000432583A45E0C88E021D881CA061BC7293C
+:103ED000D4B7CE16E23BB7665BFDC8DFA0F107742E
+:103EE0007A293FC8F58B1B790C95F88BECE998B7CC
+:103EF000C67568CCC1F75BEC3751BF5F639DE83195
+:103F0000BDC774FB72A32356B982CAB4B6F3BEEA26
+:103F1000CFCF7FF1B68890A7CAAD5FB23C89745508
+:103F200024A54B18FB11AE39F1FE24A2DBD7EF7E9E
+:103F30006647FC3B906A113D806FC3E70C0B4F7BDB
+:103F400037DA1BDFAFDCEB10E1C879BBE9F3A87906
+:103F50006DAE17C2CFF4AC14496ED8EF2FEDCD85FE
+:103F60002FA01FEA7733F5339FFCAFB0C9BF6A2E8D
+:103F70007C04FA64AFDDC5F107F23FC31172737EB2
+:103F8000BF53DFE75BA0EB83683A44EB87FBA2F407
+:103F900083F1BE58D7F6FE52AB5E08303DCB6C22A3
+:103FA000003FA3EC4307DB8FB2A7E57C14A44F7B53
+:103FB000D0FC38BEFDE5F76FC07A36644B9DC0BDBE
+:103FC0009AF56FC9339FF3B8E612FD633CD0BFDFAB
+:103FD000DAB1FE4D1F239A1D84FFF1D55E3BE4FE4E
+:103FE00082794CCFDB9CC7AB15D66FFF55BD4BF428
+:103FF000E6FCC04BCDD70517D1BB7551743D2B7274
+:1040000092905E2D5CC55D78FF208ABE065DA3F5AB
+:10401000E8B441EE36F528FD7B5F44D051884696E2
+:10402000E36F482F625FAD62D3776CD788ACCDC8A1
+:1040300027AF087EC5F00AD835865F9A8678E58571
+:10404000E336D333BAFE4EC818FD5FF4471BFB05B9
+:104050006575326F91DEE3754725E2F5DCBAB63E51
+:104060003335120E46C1A1A8F6BE28B828AABD163F
+:1040700005FB4DEDCBF6BECCEB2CC2DBD4CEB1F4C0
+:104080006A5E875CE85704791C95BBBEB207201FA7
+:104090009D9AEDD08BB665229040EF37BFA8B2DF76
+:1040A0007BDADD9C083F65458CF4E34EBB7438D960
+:1040B00080C5EC62C2E37460800B7902CD3132DEE0
+:1040C00072BAA839313962DDDE54A726BAA97D63F8
+:1040D000508C6F3BCFA586E753A3B858BDF4E7C615
+:1040E000A9DFEF90F99F5681FCD8C6EA6F77209E32
+:1040F0007498D64FF05FE6555F9F88FD97D375DDC6
+:10410000AE998E75E0ABAA9069D63E3BF220E64AA6
+:10411000568A2322F0E0081A9F9A9057FF02D6573A
+:104120002428D8FF9CB73ACABF11454961ACA7D72C
+:1041300044E72B04EDF06F16909D853E2A5967AE3B
+:104140005F54779CE7CBA2A8F9A2E971E3E8F9D222
+:1041500075B09EB7E0155E3D7F92F3F44E1F545943
+:10416000BE5A96DBC4CA5499278BFC92963A997F23
+:10417000D3B257C222A0E7F5E8F3D6A0DB09CCA75B
+:104180005E17F75B4EECFEF7C1BF84FCECF97800DC
+:10419000F6894FECF9B0E70B809FFB6BD6C7E2C204
+:1041A000F663F67D378BF1DAE710C0EBF4BE57B259
+:1041B000E06F9C7EDEC1F905A79739D85F0FEC4B05
+:1041C000E0B8C5E9CED21FAE79F1DB018D6C8F97D7
+:1041D000331F270EB64BBFAAEE3FD83EB6D439DC0C
+:1041E0001847E5BE389E5795CFC7F0BEDAE917BF2E
+:1041F0001D1C198FFBAF8EC7D8573F9D20A63F03CC
+:10420000F9D5FDFFCA17863E5E8DF5F2AE97EC73C9
+:104210009127F2A7FF3300FAF5F4332FB1FE3D6585
+:104220006B7C14B1CDE97B321EB10D455C8F3ED65F
+:104230005188AFF6CCB811F3E742BA483A9C263A17
+:10424000605C449712F8E517A347E5BF2C3DBE9A82
+:1042500025F5DC10817D9F56BA283EF93C81E35557
+:10426000347EF97CDFB703A0872E35DE7BFF1F1B72
+:10427000EF53186FFB7FC5F14A79CF1DEC66FCA2A6
+:10428000E5FE42B97EEEE70CEF48F030BE9739DF2D
+:104290005FFB971DFFFF0CBF8FFECB8EF752FC7E9E
+:1042A00055E777820BFBA0A75FFC3F59E2478CDB09
+:1042B00039E45F755EFFF3711BFE7C81EA39E8A586
+:1042C000F6AF89D0BB9E6CF64ADAF447060D518CE6
+:1042D000B838AFA7C6E02F37DA0F5C8E734C01F207
+:1042E00027B08EA9891F78E02D825F213F41E57DAF
+:1042F00059194F7A25DD1B94F15DBF403CABE0AF0F
+:1043000073197EDDFB9303C82B2954653CE6E56AEF
+:10431000CFA6061AC7CBC91637CE958DED34F7F068
+:104320004EAA7775545D589FD574CA75BA23F01B91
+:104330001B6F5E675D1DB54EFAA9DB5C3F5E3C936B
+:104340008AFDBAF1393681F33685681FB1AE4C1952
+:1043500022CFF7FC54D42E77C5FF783ACDD5E94467
+:1043600074E17D9B402755CF7333D34D806EA9A058
+:104370004B2EFBEF01E139F016C156DDBF12FAFEFC
+:1043800063A133610BD6D10E51100E127CD66DE5B0
+:10439000F3935641EB61394E5E4747D34DE8EB6AE4
+:1043A000ABCE82B19DC68441673CEF926E7A9FC7C7
+:1043B0001D4DE71F4FD7FD9D9680AEE9099E20E475
+:1043C000A2D3B3A988B3D6109D15A5959E069DA22C
+:1043D000E99E8FCDF541ADF4EE64F55A31CF46EA52
+:1043E000FEFC586BB2843B35A8F25C5E90DB8FF923
+:1043F000DA63853F323A3E99F343857E6E42D5F7C4
+:10440000C39161C778D0FA1479B693ADDA92219C42
+:104410005FEF120558B7168810E2B74ADD2BDF614F
+:104420007D84F32245BCAF59FF01E05E382F86FC46
+:104430008E75D613A6F36E51E72526E5EF1C0D7E8B
+:10444000CD594ACF10C772B9EB311F8BEF77B8C186
+:10445000BF4ED606AEA7B596AB7A2876AB430CC74F
+:10446000CE234F3F03ED5E19CDED970897928C74E4
+:10447000BB109F778C77C97C355ABC7E03D8BE3C75
+:10448000C15D23E32602F2D41D65577C5FB64F1F42
+:104490004BDF43BE9BD0D85F8EEDCE9120D1552906
+:1044A000E2FDF72EDD645E44F30A07AF778AEFEA98
+:1044B000DC137A694281396EFDC510B9AF69945336
+:1044C000F3DD729FC2E249C777E62CEFC3EB2F35CD
+:1044D000B6A87C37E8B8238EE5BC78E54D1307D144
+:1044E000F78B77A47880E6B1493B07CBF6337EF6AD
+:1044F0001E3DD7B6C6F0F39FE76B8F0F419E81E25A
+:104500009EB59B1ECCB9F6657B3A75A185269F4466
+:10451000DC715260E71BD8E79C344DE5F69384CC00
+:104520002B15CBE378DF7C62E02B6B3A7D6F222D7D
+:104530006A50DF14E3CABA85F02FD6E3CD7FD0E707
+:10454000A11A2BB467E28157E79E5DE9F94421F394
+:104550009BA3E7ED71BD7D97311E772AE8A3C4B810
+:10456000701ED6688FEFE0BB5FE9F4785E2F0D9880
+:10457000E8CA71F179AB1C4DDD1251DAC2BDA8EC6D
+:1045800033AC601FE46D425751B816DFBD4D151BAB
+:1045900019DFE6628EB327F476830F9AD0CF77AE19
+:1045A000E9C1FB394DA305CB4FD37DD906BF393FB8
+:1045B000C958CF358DF6D4237FAB79B4D3B3D1832B
+:1045C000FC9650187194436BE57E4D979A7077E88E
+:1045D000D966AFDC07F97C69AE1B7272F303531323
+:1045E000A13FE7AE51C30EC8FB6A73DE9270793803
+:1045F0000F7C6EED683BD6AFF3E27D768CEB4CBE64
+:10460000F611F8659C73EC0B9C708EA7B6F875AC30
+:10461000FBD4449ACF987F567722D6D5D1794F953F
+:104620007A7E9301FF3A4DFB0CDF9B93E4DE01F9A8
+:10463000F87469378EAB76CBD7CF575AC3DD419F1D
+:1046400047692E607E3E3844CADF8476AE9EF12CE8
+:10465000BF3102E36AB2B97A429E9B56C45840A762
+:1046600009CBA41CDF6D95F32BE8735B02F4FEB35A
+:10467000789FBE3BB3DA5AB481FAE9E414D6847663
+:10468000B4CE1DA63D0FFE4C0C541FC2FA7AAE6E7E
+:10469000AFE6AE96E7C1BA8C917C15D686B129F407
+:1046A000FCC8E6EC81C87337E466FEB082BF0F89B0
+:1046B000E0FF84025F617BFACE048BBB057A78DE73
+:1046C00034E5A56E520E7E18C2EBF93A9EE72DA492
+:1046D000271CC93807D82061E4AB426FD43EE4738D
+:1046E00046ACDBED6217D7DBE7C97CD42EF670351C
+:1046F000E75FDD225CCB08DE427E84D526C4D62A65
+:1047000027974F5691BEEB21C4F6AA74867754B909
+:10471000B90C55F5E6E7CF547918DE5595CFF09EE4
+:104720002A1FC37BABC673F97C55113F8FD63F73ED
+:10473000E3E7B33E71F5245E0FBD506E66B9092FF5
+:10474000E81FA770DD85F34742EABBE4DE52FF08AD
+:104750005D1F75ED23EF03E8962FF9615B35DAC233
+:10476000E737AD8D1990BB71EA89A79F43BCA3249D
+:104770009EF3B25A4423CF931661E173D9D03F0E12
+:1047800092BB2E778ECF8ECC3BBFB14411D608F9A9
+:10479000BAC91F23AC11F669F6D264133C73E93B26
+:1047A0007FEE40DFBFB1AB96974F781CBAF38BF525
+:1047B0007FA5E78FDD79AC873CA7FBFD86C8B84BAA
+:1047C0008B6896B0D5C9FBF18FDD9E9196A2DFD3A1
+:1047D000007E19E7A4BBD89B8F3E8179B842F52CA7
+:1047E00023F823F087E8F989CE9FE215DD56FE0213
+:1047F000F3DAE7F428F49D43B7F72BCCA7F68FE95B
+:10480000FB51179CAB4E97F6EB53D8AF6469CF0AB8
+:10481000A047C3D26E7DFAABB4C05DA8BF25D183DB
+:10482000130DDAAA0E810504AFF6DA3D2AE27A7595
+:1048300082EF5D201A4BBF226033DBB1C64EC988C0
+:104840005B1AE79EE3F2824E3E77451D613F664E5E
+:10485000EFFD22037AA9567161BF06E7349DEDA0F2
+:10486000DF14DE1F451ED034B29737E5AB3C3F7FE7
+:104870003FC4CAE559D873A26B8CF0707C66DE6ABF
+:104880006A0FFD58EBB5CF8FD0BF73F4E7737B5B36
+:10489000B8349E97E17BD83F5CE59D0EF9E888FA35
+:1048A0001C9403A703BF8EF185562562FF777EBE59
+:1048B00055EF5FF67B169392E07B7A77B5DF9CC36A
+:1048C000E7ADD86E19FDCCE93D706557D8EBD5A39F
+:1048D000411D5163F3A4A752BBCAF3DF71497FC4E2
+:1048E00029F3B3CB2E62378C38DD11FC29CF3DF292
+:1048F0007817ED786A07CE3D2CFAD8C1F66BD11542
+:10490000D22E899CE0E0A91CD034C7C5C73E75B241
+:10491000FE2EC2E724CE2521DEBFEB333BF24369F6
+:10492000DAF8933200AB4DC8338D8ECF1ED8F171BB
+:10493000629B71F15DEAE5C5C595EF1361178CF1D6
+:104940008C7BF16C1AFCAC4AE51CEF3355BEB822E7
+:10495000ADADFCB0E8B8F8F9F8B958FD15CED757A9
+:10496000DE71A4CDF879741CF0F1FCE8FD88F80242
+:10497000E889B307D520F6D35B823D92441BFD1B2B
+:10498000F1F3CAB5F4520AE6A53B09FB61A72FE291
+:10499000971FC997F6FDA41E6F3FBD5DE5F5D2E9EF
+:1049A000ED0941F8A715DBEFAFC73E65C52685DDEC
+:1049B000F372D1C0F4223A0A67A41D43BE5B0A9C7D
+:1049C0006B7712F495815FE953097EC8D5C290E2F6
+:1049D000DB4C78B438DD49ED23F03800B96A8F3C00
+:1049E000C0D060A6AB8EF7F3BA1E34DA2DACBB9FF5
+:1049F000E3D2D4EE14FB3B7F88139C27289ADF0078
+:104A00007EC7D7E57AB0AFB830B4B382F33BB6C750
+:104A1000B9108738A6E7391BDF69D0FB6BC897FE52
+:104A2000C9717DFFEEF80E79DE1C78623E1D53CC15
+:104A3000F982EFEBEFBD9F2FF7CFEEC05EE2A0D67D
+:104A4000F60B434D89DDA9FD977BDFE1B2516FBFC6
+:104A500030BE6100ECEE97BBE2783FFECB5D8F1479
+:104A600022CE7C32343A15F26F7CFF54BE8DDB9F30
+:104A70005CA78E07BD4450E6D99483AEB99178A661
+:104A80006C086447CE33996F747CD7B389969C5673
+:104A90003E963BFD4E9CF7ACDC754B11E4B8DE2630
+:104AA000E969DF35398063CC95755E01F9E5799662
+:104AB000C1ED575922DA396C1EF68B6D7B8B7D6800
+:104AC0006FC4A117EFB6F179C15957B8AFBF11F351
+:104AD000F0351BF361711FF7F59C8FD4A072FEF2C5
+:104AE000E26C1186FFB1E4B6840DD80F33F09D95CA
+:104AF0002BE77BD92A45F8685C6541790F4747E287
+:104B00007B00394AE98D83903FD9941DBCBB672A4D
+:104B10009FDF0DE3FE1623CF94E6714F9C73EC30BC
+:104B2000B41D8FFBC119856CEF0ED945007A21F0B9
+:104B30008CCCC329EB2AF3A31F86DCA3BF76E19EAE
+:104B40002934DE133A5FCBA6847B222FA3EC990C89
+:104B5000CECB386197FBA5788EFDE2B281F47E3C26
+:104B6000DFCFA119EF2747C851D91C8F1BEDD47691
+:104B70001EB7371EF8BA4EB1DFBA3B41C06FB53C25
+:104B800097A0E757C5701EB9F15EBFA152EE8C7BAE
+:104B90003FC40D321FF3419BCC577D707306DF7706
+:104BA00061B47FD0A6CD80FF8471C05F5F68AFED38
+:104BB000897D1703DF8589B58CE7095DCE17C6D6D9
+:104BC000CABC70FD1C31DA036ED2F3D89BB73938FA
+:104BD0007FE55846C337C0F7D8B63EC88101BDE768
+:104BE000EFE57AF21F899F8B9E7484517F749B8CB2
+:104BF0005B1FB505BF811E3EBA3E85CF471D6D1FA9
+:104C00001CCCF9018ACB02FFECA8A2C33617FB9596
+:104C10005DEC0453FBD4586141FECEF8296B67214B
+:104C2000BFA1659303E2298E6D79288DD735C29D8A
+:104C3000C47936075501BE1D7BF23FFA44FA2F4670
+:104C4000B9689339EFAE295B98EEC9B97AA89C97F9
+:104C500057EBF4BD66A8B453E571A107BBF2F82485
+:104C6000BD893FBCBEA3199AC0F9134FF750A037B6
+:104C70001E16C19F7F9CC7AB6C37F2E6CB9ED9F660
+:104C800006F66B8F594403FC0FE5CEAD3FC77D1B85
+:104C9000A9BF49623B24C4261EDF51973CA74A1393
+:104CA00096C7BFB08384174DDDDA13703DD91C85DC
+:104CB000E6D7228BC2FD2FDAD39FF3ED881F16DED5
+:104CC00027DBA9EAF8904F09FA6D91F9CA13DA05C2
+:104CD000B7C0DF6B5EDF4DE0FCFA3875DD00F0EF4A
+:104CE000CCA6380BE4A9FCAEE149C341B737550166
+:104CF000FFE38CD5D321328E104DAFE83CF0E0506D
+:104D0000A99FCA700F0ECDABD23DEBF9BE9052C831
+:104D100025E8F2A4C2FBD8A52B873FC472FA864DC2
+:104D2000F4A07E4F84EE4F8CE4CF3D43A55F70FE30
+:104D30003B760FB72FA5F6F2FDD71219CF2D36CE41
+:104D40006B89E6EB65BFFFA47A59EF9F1F7F88FC54
+:104D5000820117D2E18C68F8F9C7F4FDAFB7C7F04C
+:104D60007A9056007C8EEDB82D341FE33EFE740C15
+:104D7000EBAFE3C9524F7C49FA34D00B785CFD5B52
+:104D800096D3B7A7F279BF0541F3778D7E7F3B5469
+:104D9000EAF1F2144F12D69DE56F4A7D48FCBA86BF
+:104DA000DF7FD3C6EF478FA3427FEFFC3C7D3A8E77
+:104DB000E5E27847C98FE33B7AB17D6A4A76099686
+:104DC0009B6D36596F0B65C10F3EFE742F6F4DC43E
+:104DD000778F2787B25C11CF9B6CC19543A43E6D42
+:104DE000C6BA588449D50E467E91603D6FBC57EADD
+:104DF0005CDD003F05F9BD8307721976B4BB304F07
+:104E000077423BB99EFC529F779CB39AA6E793B337
+:104E1000DF13B2438F6BBA7F58B63D3ACF57D6D720
+:104E20001BEFD3BC4B35F28A2DC037644FE7788334
+:104E3000703F43F8962EBF6521F2C74BFDF7DD08A2
+:104E4000FFA9D42AC6DB09AF2645653C9A62C4ECAB
+:104E500029F02323FB89F0DFDE6AED47E0DEB6327E
+:104E6000FC41F3E0BDA16E293FB0A4F4BDB2E5CA98
+:104E70006A7CDFD02F1C284C6BA513F25A91DFD32C
+:104E8000345AAFBFC8B89B6CB23E7ADC063E478747
+:104E9000CABCA0A66CF76F47802F7F51F97CD799C9
+:104EA000EF7393DAB5E1A7B5DA7B7B6B9E2DE1FF5B
+:104EB0000D7C6BFACEF3BABE2B25FC8067CF75E66E
+:104EC000BCF2DE9BCC70DFED66386797191E506729
+:104ED000863D07CCF021BD5FACB3710E19EB6C942D
+:104EE0005867BB1D729D0D18EB6C945867E339D65B
+:104EF000D980B1CE068C75366083DE586F03C67AD2
+:104F00001BF5BD86497D2E7CE134E46B5658649ECA
+:104F10002FF1C3C7E79866D84DE7524EBF28CFA5FB
+:104F2000903C487DBF309EE7C9C36831147649CEB6
+:104F3000A7D4E71DC165F4DE38B7963C0C7662ED68
+:104F400057F32177155D1B39EFB569C52B3DEFA7E9
+:104F5000768D4A82805F51B1F6AB59F0A33AB8B56D
+:104F60000EC3089FCAD8869543386E1F66FDD15878
+:104F7000ED7EF34AC9478EBF14ABB8F982EA4BDA2B
+:104F8000B5993F149D772E569BF3CC2F95771E2D08
+:104F900007861FF898AD39C3C5EBF4118F22CEBB3D
+:104FA000584970619DFE598C5886FB8002AFCA3CFF
+:104FB000B59683369937B05AD92822FC93413ABD29
+:104FC0000D78EEB95CF6C7CFC3AB158BB84288EE4F
+:104FD0005A7313D6D7674A2CEC779F2929286C0F70
+:104FE000FF8FD6659813B86F2B125FDCB715293F7A
+:104FF000B86FCB7C6EA2A3A93DEEDB329F9BE86B22
+:10500000AA9FBA3AD7543FAF68B8A9BEBB90F82D53
+:105010005928F19B47F6C197027819E72D2E01EF29
+:10502000C84FC952022B592F6F50F8DCB87BE9AA40
+:1050300042D0E5048933E20886DCCCD5ED8BB0069E
+:10504000EC90BBB3A9B2FEA8D2F0C55DF4DE496F07
+:10505000ED165C8572D2B2EEC1116EE4D76FC872E4
+:10506000D13CBC5509A541F5140CD234C8D9616BAB
+:10507000E364DE4FDCD9BE5D35FCCE8383DEC847FA
+:105080007FDB55CE9B30E425CB26E3741B689D0166
+:10509000FF6A43ADCCE7DD509B12DB3D62FFC518D4
+:1050A000670BF820502E4B4BE5B89068C038C86F9E
+:1050B0005F06BFEDCC41E9B71BE3E9BE3CDC690903
+:1050C000D5DFBA3386E973585F379CE8F3D20037EF
+:1050D000CE6F54EDCD52E10F58B66FC13A22215533
+:1050E0005B0AB92FD9D0E3AFB8AF6BD17BAAC07937
+:1050F0009ACFD78C491C4ADF39F6B4CD3381E0BB57
+:105100006A1FB7639DBCC81AB4731EE6B60D76E479
+:1051100025FF64EB067E3E7F6B31E75D2E107E5EE1
+:10512000471ED1CF6519E32E2950D6B948BE3E1A85
+:1051300026F56349ACDCCF2379FE33C67566ABE256
+:1051400085FF38AD68A7BD989EDFA7B7734F9F3E18
+:105150000EF2D71292F76DB4BCAECA7BC4A6A932C8
+:105160002FE622F7F34C3D97CDF23DED5C3F5E67B5
+:105170005D1BEE23D7B139527FB4D4A9BC1FD7F23F
+:10518000FACBA953F1BD3A1BEFDE95D81BE4F97FAA
+:105190008BF0E31C817B7A8394AB6CE187FFB7E4EF
+:1051A0002FEFD463DE2DC976BA311F8A46A826F9BF
+:1051B000AC1C1B6792DFE9A29DE91CCD75482A89CA
+:1051C00080A74DE8666A7FFDB47E51FA60606B3D52
+:1051D000EB836151E7000B4C70399577403F89AB09
+:1051E0004CEF958B29ADEDB01EDE24FDD6F25DC9E6
+:1051F0001BB12F5E6291EBA1E99A7C5EB1573E171D
+:1052000022F6FCB9749CC7477CC0746E5BDFE74331
+:10521000BF1C0FECD6C0719DE60CD29744D1F2DED4
+:105220008D76C4D3C85D6E469CB43C4030FAF58997
+:10523000E61A9C1FB14AFAC67B5C5D9765B4CA4505
+:10524000C52E73BE55C5C177B89D91CF185D4F9ED1
+:10525000EFCA8EC07B82E2E57393DB9BEC88074D3F
+:10526000D33AF1BD14D1F79F95859A18CF6BF7A665
+:10527000B9B06F5B1175EF59A7E16E699FF4F83F04
+:10528000EE0D927E42835DC66DE3F75B78FEC97BCF
+:1052900076CECB658945DE1710459709DEF7B8BF96
+:1052A0008E19320F0D74B146D0255A8E40276B04EB
+:1052B0009DE60B49A7F9A44D820477849C45D2E76B
+:1052C00047D26B01FEA0FA057B9520F2DFA2E933FD
+:1052D0005F6B64FACDD7E2FD41D785E3A9B8E383DC
+:1052E0007AE8A71D19F29EC268FA2D100D2BB1EEB7
+:1052F0005D4076239CCC726177F23A4DF1C06EBB73
+:10530000F31BED36A9CF38CEDBF2FA3B3CEF5A3C2B
+:1053100034AB211782EAA97DBCCFDDBCAC8D3CDF6C
+:1053200029E764FCE4BA73562EA74D30CFBB6BCF90
+:10533000A5F1F31F4B970AD019728EB85E621BF766
+:10534000E621CE9778E1788DFD10430FB7FA75E628
+:10535000BCE58BF97FD171C2DEC3F538E12031C8DD
+:1053600094B77C11BF233A6FD9B0E32DF1D24E8EA2
+:105370005373DEC4D9C6E257555EA7BBA78FB7F0FB
+:10538000F9F157E57D77DA8AB34D904F2DC1C27A96
+:1053900070714257BED742D3E376463F59D529694B
+:1053A00088FF15C7B8381FBFB85A2D82FD2AA676C8
+:1053B000EE88762B9777CB825DF8F4EE5E8F0668E9
+:1053C000BE7C7A5B6A1AE2FE9FADB0A592E63CDF36
+:1053D000EED315E3B2909FF1D97D8EE9C136E85343
+:1053E000345CDA81F23B3F60BB75D2F27AE2747AC8
+:1053F000BF6CC5EE4484EA4A57BC33D8452EC5E19C
+:105400003CED9AE1BCBFBA610BDF07EDDAC0F709EA
+:1054100068484A6E8F7D8815CCF7458ADCAFBE554B
+:10542000097F7125B53B11735FE2F46CDC6E2A389D
+:105430004FE3ECA604FD3C5A35E70D9D88257F809F
+:10544000DA1F8991F43CB233C1C37762780259BC48
+:105450007E6B2FF7774A2D75D7019F6B52356DF80C
+:1054600020E011DC92AE723B3EB7AE55F7486A2B96
+:10547000FE61945B743B0D7F1B25FC6DE4CBC0DFAC
+:10548000060C7F1B25FC6D3CAF5C6BF6DF6ED7F71F
+:10549000FB8C7870979A662FFCDD4081E8ED673BC6
+:1054A0003BA1E0F7B05BAF4A7F6189E259D5C8FE06
+:1054B00052422DD69D3556E967073E91E7A22082DC
+:1054C000D04FBF50FB7AB09FFF50DC9D8FA1FD52A3
+:1054D000EC0FE5E11E53F2BD22E4F5CA734E1179DB
+:1054E000EE7634396191F0186786A9FD3857B6A970
+:1054F000FE27E97D4CF53F757B4DF0D5BD879ADAE7
+:105500004FF48C36C1D7E4FFD4D47EB26FB2099E7B
+:105510003A7E86A9FDB545C5A6FAEBA72F34D5CFAF
+:10552000D06E31C13796DC666A7F93BFDA542F8420
+:10553000FF09D0C71790F7AAD561FDE4C0FD2F4E33
+:105540002EA9FE0FC8631E4D22CDF7AEFCE5677C89
+:105550008FF57EE435D38C1B31C6E26F2B8EFF07AF
+:105560005DFE6347FAB60DE7756E03DF8B89D82DB4
+:10557000E46E1FECD4A0D6E79DAC46DCAA2143DE46
+:10558000876E6E7FB17623E2F69F7193C8F5AC3BD0
+:10559000739395F4D78821FB73BB21EF79C4E0594D
+:1055A00056D2372386EF7FB62BC1FEBA3B6771FD1B
+:1055B00015FBCFA0FE1F75C3243C55B06B72FB8852
+:1055C000BFDD84FC941157765DED91719136CFB7B4
+:1055D0001B25E88473E1A013CA30C93DCAFD24F736
+:1055E000280F90DCCF23BD564F728FF220AD33F1E0
+:1055F000FCDF689D89F2755A67A27C83D697281BC9
+:10560000687D89F2EDAAE95CBE5BA5F17BEF579559
+:1056100070F941959F9F7F54B594CB4FAA02FCFC33
+:10562000C3E1328E108F7B9313FEC9BDC97E17DF95
+:105630007F50A3DB2D51A7E7D5ECA7F52BE8D96860
+:105640004DFEC2D9BABF78F1F5BE557C11E1B74D18
+:10565000B6FA3E97FCEDE462BDAF3F2FF56AC7A0F6
+:105660004FDECB9EDA235785BDF3FF3989EADEB3DF
+:10567000B47D9FE43E5D5E3E1EE13B8DEF8D741E6A
+:10568000E2FD74770679ABC31956C07F65A08C5FC5
+:105690008EB436D4A0BEE63BE1C6BAF9A584F7794C
+:1056A0001FBC86DC659C3F56CEC9F5CA287DFFBE6F
+:1056B000E63BB97F3F0AB853FD4897ACAFB9992C88
+:1056C0009D17F521FEFE289C7696E7DB4C793B631F
+:1056D000CF358CE1FA78BB1BF9A6A39C61F93DA7F5
+:1056E0007021BEFC52C21ED9FF38D9FFA6EFC2FC02
+:1056F0007DAC3E91973DD2D98ACF32C6AF41DE37DD
+:105700009723DBD7E8ED4769D47F32F0F34BFC8A6F
+:10571000A9BDC49FF5DC287C3319AB6D591F9B2EA6
+:10572000CF278F3DA7D77BE4783B58258C3325A81E
+:10573000CF4CD1848FFACBCC141EC4DF46A536647F
+:10574000707B3D9F21C12ABF97E491F77175FFBB24
+:1057500026F7038800C0DFC84B32E66DE776E10C20
+:10576000F8799D17DBF97B99EA4E2FF4F5A75EAD2A
+:10577000EF08AAB73A2D3CBE1A9F3C2FFFD68BEEFE
+:10578000CEB85F74B2EEAFFF13FE5F81F7473AF712
+:1057900049FEE392B7CC5658994FFF0F6D93FF9295
+:1057A0005E242F183FF19FF9017EEAFC570CFAE8BE
+:1057B000FC3FCFAF6591F5BA7C5CC8FF90E4B72E93
+:1057C0004FA39C326F02EDC1FF9156290F35313244
+:1057D000DFE3A584C287714F16D1A608F1F991863F
+:1057E000BCF8E5F9E1FFADFCCFB3CA7BE41C654E24
+:1057F000BEA7EE52F230BB5914E2DECD8D03B57D6B
+:1058000098D7C5E7DCF580E78AD18570CF8DFAA7F8
+:105810002E52AF7DDD6C036C3C7F1BED06B5D65B75
+:105820009D6FC741EF19DF31DA7DA57FAFB5DD4050
+:10583000FE9D8D25E342EB60BFC6575B396E4D9EE2
+:1058400009C307C99EC97C4E5FA2372D32FFD373AF
+:1058500060711EEE0B95E7B744BCF4ABDDF41FF4AA
+:105860006AE1F745CBD19F50B75BB1EE388B7C5ADC
+:10587000FA4E61AAD93F1F1FB5BF7E55CE97EC8F58
+:105880005F75897BAB7F3742F7A7B345F67FF2DEC2
+:10589000D08747B07EBEBC7B437B8B3A9683B1C535
+:1058A000329F8BC66F1988B88D4FF801170ABF1544
+:1058B00072305ED45AE5BAD277A2228F57ED4C9F50
+:1058C000AB45989F4F24830263720D890FE097E3E5
+:1058D00026CDC47DC06372C774C7F388FBF3FE0096
+:1058E000FC2A54ED6FAE88FBF3F68F95F36DF1B59E
+:1058F00032DEB4DFD9AD4D3FF455B2B7DD7B802E3B
+:1059000082CB3F933DEE4EE37E85EC31E0AB7A57A0
+:105910000BBC57E836E71D19EF5FED1A23AC2917CA
+:10592000B777570FF86327D0F9B5E45E63C1AFD7F7
+:1059300092878C453CFEB5E40E16593AEC5CF67F36
+:10594000AE7B5BF819F3A3B5BF42EECFB8FF776C1F
+:105950007B79FF6F345DAF1221137D27E8F4FD11D1
+:1059600074FD087A349AAEFBF475C57EE73B7B8CF8
+:10597000BC29C493BB2F6F60F8569B9C07E5CF4DA5
+:105980002C405EF4E2F7647EC751A002BBBB7438C2
+:10599000E33F6AE95061CDE5FDA800E85DE6947457
+:1059A0003C19786900EE29AF4FD18E83AF5FAE53BB
+:1059B000F9BCFDC96762381E7724F86C22E869C813
+:1059C0007199EA5ECDBFA7F19A2AEF59FAFEE52C4C
+:1059D000DC2B7A31B92679FE7AC4A036E4399EE40C
+:1059E000B9FF85F22C36C97B0CCA9C856DF2D9585B
+:1059F00077BE30D0C7FAC225C2B740FE2B845C1FE9
+:105A000055385F97F754128C73AFD17ED5E0586A42
+:105A10004FF576A7CC1736F89DE990F75866C6097A
+:105A200017E22042CBED0B7CFB76F7C58DE4FCC280
+:105A30009CED91796BA3C2FD78DF79FC4195F3DD94
+:105A40005F8995F7B837123F14F24F7FD2CF1FDF2F
+:105A500095F8983C444B1B8971A9DFABE8F7F51E1C
+:105A60008A48E1F8796E3CAFB37FE47A3D6BA4AE2F
+:105A70005F068801FFF4F711DACB7B8417BF9A1B0E
+:105A800004DE8BABC9AAA5F2EF5CF03D7135589FDF
+:105A900067B7EA9D51A227FFFEC598541BE799FFFF
+:105AA0006FFB7D844CA1F1FCFBCFFE4EC278F9E880
+:105AB00082DF49C84C5C75404B6DFD9D8CE8DF4929
+:105AC000C8D4EFA7166E693F8CDF47B852F8382F5D
+:105AD0007F5CBAD9AE8C718D3EE0E2D21CEFC9BCBE
+:105AE000443ED74D23F5739D97E27BB9D0F92ECF75
+:105AF00075420EF4DF3B09423E8DDF3B31F86EFC10
+:105B0000EE494D7BF9BB27FF6ABF7312CD9FE8DFDB
+:105B10003D89E64FF4EFA08CD262994E63CAE259F8
+:105B2000AE0D3E4DA7FFD81FC0B95CE5BF9F5FF724
+:105B300047CDD3B362F520DC537ABA58EAF58BD956
+:105B4000FF695EDFEFA16FB6E97ABFC629E321BE28
+:105B50001AAB881925703F21E7CBFEA246DE03551C
+:105B60006395F18000F115F7E27D1BFB0F799F2310
+:105B7000F947B68E88CBF8F9FD80DDE9AAF144FC3F
+:105B80000ED652791EF89045FE9ED4EC1CBF82FDC5
+:105B9000CB4E5DB5A7A0AFD245D1CEF91C97F70F7C
+:105BA000817E9FF5274716EA677591F7478A1CF9AA
+:105BB000BB4106FEB332655ED6B323753DEE9179E7
+:105BC000587B46CAFDC0048F8BCF3514E7083DBF14
+:105BD0005564CDEA0F39FE84FDF816B7F4AB1B6DA2
+:105BE000F21ECBC0AB329F679DFF6DF6FB37935F14
+:105BF000AB4AFF66EDBD1C674814D8C77D2CA6399B
+:105C000019F8F75A2B4CFE429FA0D39497DC6FAB48
+:105C1000CB04F70FA59BDA5FB1D76DAAF7867B9B04
+:105C2000EA730F7A4CF0A0867C53FB211FF84CF0EE
+:105C3000D0C6F1A6F6C38F1499E05323BB4A3A416C
+:105C400026693CB396B882F25E7C1927E96297FE1A
+:105C500054CD6D723D61E4AF6BFA3C88CE5FEF6C62
+:105C600095F9EB76BFB46B5ABC5CDFBADA0997CA18
+:105C7000E7621A18C6DD109C371E30E7997772CAA2
+:105C8000F59565AC5C7FD8F53CF3D8DEF2DC8B9102
+:105C9000574EEB0A1FE8DD5D34CEE0DF2FD0EF1367
+:105CA0008D96E7BF8FD4EF738AC2BB8B5D9EA7AB87
+:105CB000B9CDCEFBE75ABCBD4949BC109F6E7A7E78
+:105CC000E46667DBF73E39474939BB21AF488CA210
+:105CD000768F92D962FFEB82FE3C8DD07735BFB2D2
+:105CE00073DEF8A5FA9B75851CCF4C8B65F6E41C1A
+:105CF0005E0FF23940A3DF74F44BEDFAF874398F7C
+:105D0000EA6F565233DFBB2692EC6EC8AF16BF92D5
+:105D10006157AC4856DBA07BEBB90C99A77FD3EA5F
+:105D2000D0BDBD08CF99F65A9BBC702068833C4C0F
+:105D300028203FD28BF8EB43EBE3891F8FE207EC7F
+:105D4000C8CFE8B2AFDDEC4077F899CD2C0F4844CE
+:105D5000C17E22FC4F75602BDE6BAE9479DFBE51A5
+:105D6000C2B8FF80F16AD1E3232D2274FEFC44A067
+:105D70000D79D3E2EBF91C826BB194A7CE11E7AC9D
+:105D8000B0FEFC9F3A2F21B0434AFDD86A853CE71C
+:105D90007809FA19E754DCB7D88A36C6E3BC881804
+:105DA000AF44D0E1892BA55C2E061DDACB76D04717
+:105DB000176B477E5F12F6175A843BC97589B8FA8C
+:105DC000FFC4F833AD32CE90E594E7453A5B35D663
+:105DD00017F6DEFA3D7717C8BBAE37F4385927AB54
+:105DE0009CF79D3C725E5FA8170EF0F7ED9ABC37EA
+:105DF0002D9ABEFC2F22AE629C5F891D2BF588A1D7
+:105E000017CE9F43E921D7A1365D3F04BB5B38EF36
+:105E1000E0AE04F33C7E7C94A46FA13E8FC9CE27F4
+:105E20007A079BF484C0BE5ECD0A95F504E9C97A71
+:105E30008DF02CC6BD2CAED6DF7BBBF90169C74601
+:105E4000F98A1EC4BEC99C3536B181F715E4FDB090
+:105E50000BF438797120EA7E16DD1F3FBB5A71E1E1
+:105E60007720E6AE32D72F88FFE213AC1F6F8EBECD
+:105E7000A7C6D8AFBB441CE0FE51BAFDF7088F9E01
+:105E80007FBF0CF89D0DCA7BAFCF9F57D2E33F2D4C
+:105E9000C167257C87E07851B45F60C06EEC9345A4
+:105EA000DCC342F48DED0DFBBEDCDA667EA341DF80
+:105EB000F3791EFA3E1D95CB56F07A46E637903EB2
+:105EC000E07DB913540F3FF044E00CB73FB12B868F
+:105ED000F34A4E7A1B0660FFD6D8A7EBAEC97DAC5D
+:105EE000965D0932BF21DE22E1ADF21EFB457F0F38
+:105EF0000EC03AB631F0ACE99C83D668DEE78B2E53
+:105F0000B5EADDBCDE3C9CA7D58D427EBDD5E3F471
+:105F1000107C77FC7EBEA76B02AD1FA1D79097B215
+:105F20002255E2CFFA2B7046D2CF2FE9770D397A7E
+:105F30009C9F27487B228E2968554B65717828F7EE
+:105F4000FF63F7C1A69EF3CAFDDF73C3F97D6DD56C
+:105F500050867B079B477F40FD5EA7C5BB1147BAB4
+:105F6000B6E617E362E9D38DBF8F5FC16567F3F9CA
+:105F700001A3FC58B7238DB6B6EB27E8FA67E19585
+:105F800086BE96F2BEB85AE17DB5C59071C0F7CA1B
+:105F9000FB390DF84CAD0E8F93F092151286698285
+:105FA0001F3C47FFDDB32D7AFC05E34789F1232E23
+:105FB000B05D8FCF60FC28317E3C87BE020C7D0532
+:105FC00018FA0A30F4154AE82B3CFF3C790CEF6BC9
+:105FD00063DF6E6CC47CC2BEDDD888F9817DBB48AE
+:105FE00018FB7691EDB16F17598F7DBBC87AECDB4A
+:105FF00045C2D8B78B6C8F7DBB4858E4FFB415867B
+:106000005EF34D36C153693D3036623E63DF2EF29A
+:10601000FBD8B7337D4FBBC5F4FE8D62A9E97DEC9B
+:10602000DB45B69FBD5431EDEB09D1CC767DEEDA80
+:106030001496A3D7BC451957B6E7DFA9FA99AD2B3B
+:10604000EB078E632C2E8FF5487ED78E97FCB7C852
+:10605000F3114A33FFBEC0993BEC121E67CEDF3608
+:106060004AEC7B8DB5C97D2F94D8F742897D2F945A
+:10607000D8F71ADB43EE7BA1C4BE179E63DF0B2566
+:10608000F6BD5062DF0B25F6BD5062DF0B25F6BD75
+:10609000F01EF6BD5062DF0BCFB1EF8512FB5E78CC
+:1060A0007E88F09817A1C7E0AF7737AD33490E4D22
+:1060B000EB4C970986BF1ED91EFE7A643DFCF5C8DD
+:1060C0007AF8EB9130FCF5C8F6F0D723E11B46B91E
+:1060D000799EC16F8F7C0F7E7B24DCBF36F067C456
+:1060E000D626AE3B7500656382F228CE1BDE70E5D6
+:1060F000B6D9D8BF6C8C51B29249A7DBAA77CC1E17
+:106100000B7BABE73F0E10CD16E81F0D8BC93C3E55
+:1061100067C879A5FDBFCBE0FADBF5FB11F81FF1ED
+:10612000DDBB4BF0EFCE18FBEDC6FB1E32DB288D3E
+:10613000F6AD70DBEDA2FB37DA716E55041E38D177
+:106140008CBC19EF1DF103B10ED9A2FF8EF096653C
+:10615000322F3A5AAE7EABEBA72D969DFB710EA661
+:10616000B958F1E0DC47F75A8DCF99F59F292CAA51
+:10617000B7753CBD1E4BE4BCDA5F5C29ED9181BF75
+:10618000111F257DC1E7074734378C49A2F65A60B5
+:1061900034FF0ECE04BBD07F2FD83F0CEBC97E015D
+:1061A000C5B73142CEABF5EF690189C7138F4D9268
+:1061B000EFC5CAF79E782C91FB9FB45CE13CB3110C
+:1061C000DB850FE794EFD1F1EFB73DACA2BFE2E57D
+:1061D000B23FE3BBC5EBB2EC38CF6DD0AB58348ED9
+:1061E000C57DD2224FC19DB2A2A75563BFB4C34C97
+:1061F00097057ED0E59E831A99973C0E7988A24E2A
+:10620000F0BDA113F3DE328D97C93518BF6B2A7824
+:106210006DA8056EB1A0DF49448014C49309C67807
+:10622000344DF8B389BED74D2F667AF79E2914D026
+:10623000BBCFCC0D96547AAF9FF69205FE5AFFDA8B
+:10624000462E8D71784624AB8027D85CE380FF848E
+:10625000710AEB8FE83C1EF8070C2FB7B13D37FCF5
+:1062600087C509E7F37CFE8A3C9F33076D9CE77383
+:1062700066F959AE2FDE1DC3793DDA5A85F59AE1EC
+:106280003718793B65B7BC3718F439961DDC92DCBA
+:106290008DEDFC1FAF441E4BD79D89381A7762F9EC
+:1062A000EEEBE0529E59BE5BFEFEACBEBF63FC8EC1
+:1062B000A9C8F1713E98E1070AB5CE1EB98F63FCFB
+:1062C0001E1AE94F6E7766AFDDC5BF47A7FF7EA9EF
+:1062D00011F729FE4B6E3DE85ABC5EFE9ED99C55D7
+:1062E000F7154E2778BECF19C6EFA147E7632D8C6F
+:1062F000F2032FF5FBA5C267F6FF2EE6EFFCFFF2D7
+:10630000BFB7FCBF73A5703700800000000000001D
+:106310001F8B080000000000000BED7D0B58556539
+:10632000BAF0B7F6DA37606F5C080AA8E002454DAC
+:10633000C936225EBA2EB9282AE206C4B441DC204E
+:106340002676AC21B3911ACA8D7B4348D6C04469E6
+:106350008ED5D6D433534DD1654A27EB6CB59A2EE2
+:106360009A263975A682ED25B53BE9F1D49CC799EB
+:10637000CEFBBEDF5AB2D776836633E73FFFFFFC22
+:106380007B9E66F1ADEFFE7EEFFD7DBF25136D06B2
+:10639000369EB1337B459F98C258C5BE3DA52C8E15
+:1063A000B1533526C6A05C562F322CB367992F4DBA
+:1063B000C0728E2102CA657F501C82CCD877ABAAEE
+:1063C000F7BF064DF7AF823616C68ABF1FCC5826D8
+:1063D000631DAB642A977E3F86B158C60A0211F44A
+:1063E0007EEEF789F4BCFEFBCBE87DB10DFAC1FC73
+:1063F000811DCCB71AE63BE5B650F9D44EE6C3F999
+:10640000F1173781B111F8070C99C1A43C368CB152
+:10641000D18AB007BAB359DF5F45E3CDFB3E83C6EF
+:10642000BB667C45C300E80FBD1D69D07ED6F8F77A
+:1064300072FAC17A5DEE295922948B8DFE39387E2D
+:10644000B1C3C4DC29F8FE564302D417325613EB0D
+:1064500080F650C6FDBA5CAC468861ECCE89D06946
+:10646000009459CDEB03100E5B98632BBC9AE7AAFE
+:10647000C8C67663CA9820C2D4E551ACA61DF7629F
+:106480000B64155DCED80FF8BB0EDEE322AFC4C59A
+:1064900027BA14A82FEF077F0EA26D29CCCA983D0A
+:1064A0009DD75FA924BABCC3E1EF96758A7520CE4B
+:1064B000C77F43CDD00EE611EF34FB5603FC5D36AB
+:1064C000EB61612C54B8F394C028DEE68754C6868D
+:1064D0004D823FB2E05C0C86854E9867C18A0C7392
+:1064E000657ACF3ACCD9D9F3A6C03EF2F0BC61BCF4
+:1064F000E56B4C3E4B0A3ED3E299ADA75DE87311C4
+:10650000C0578EC575076E17003EF314A6E4C25C33
+:10651000F399B62FE667B08E1BD4B2D7AF049A6C4E
+:10652000040F2ACFF18F70B9611D375B03530193BC
+:10653000D8CFD36BF2130D8CBD61E270B5985CCAF5
+:10654000605887697B867FB08CFB90E83D330612EC
+:106550009D76D8C7DAF6FB46C27BAF22F3FD995B86
+:106560004C0C07623E9313E0BC289D293E84BB91EE
+:10657000E3D191352F3DDD2CF4ACFF8889CD6B0F35
+:10658000B3BF3AC540F36C03BC954732F6DB5556B2
+:106590007A3EB14A6232A0E053AB12A8FC34E0313B
+:1065A0003EDB578DA2F7CFAD7250F9855593A8FC0D
+:1065B000E22A85CADB57E5D3F38FAB9CF4BE60B407
+:1065C000EB1605D6FB9041397C0FEC6F90D8C210CA
+:1065D0006FF1DCAD137ACE37A2E5BB0A3C8F2A9B64
+:1065E00059C6755701685CB08F4AC5EAA8075000C4
+:1065F0006C1B13A05C2EB2EE6647B873E7707C6C20
+:10660000FE7F2D3540BBC7EE8A24BAD5E057663EE3
+:10661000F0BA35A5077E1FD5FEDAC40C746C69325A
+:10662000CC7B434D84A33905F1C3E9C1F546A53BB5
+:10663000CC2E80D7BC298CC6BD32D5D988EF6F5EF1
+:10664000BBEBD10FF0FC76A6985D709E15DB331A7C
+:106650001364ECE7BA5781761536C98C78778B3797
+:10666000C62CE3F9C7033D206EB3EEE4627B0FDC7A
+:10667000B728028D7B7D361FFF1B3C1F6AD7622A1D
+:10668000D2B5E3E7733E3D1C9882F0F200FB581D43
+:1066900083F4F0E2143C77E94EA091C9B01EF63EB7
+:1066A000D59B1398E489391F5E83D90101EB13014F
+:1066B00096EEC93DF06B1E55497CCE043428C604C5
+:1066C000C38F113D85E2CFFBB80F804BE50A6175A2
+:1066D00003CC5FD526FA0401E9ABE00DA2AF564129
+:1066E00026FA7A70983991E84D90907F15F497A723
+:1066F000C643FBEEFB0469B38CF40A738DEB19B748
+:106700006AFD64A2B72A1F3C337BA7CB9FB5EE4935
+:10671000DA21E3312A665C6795A498FB07D1FBA2D6
+:106720001681E822B4FC9A22723A626F9A106E6562
+:10673000C365C19381FBE1F8B160458AB9D286F5A2
+:10674000CC6F807515A4B237B05D772BAC3785CF91
+:10675000332E68DC4A1C37685E68BFD009E57715C0
+:106760003BC1B54292CD8928572489D657B9629743
+:1067700009E1B308E02C64203C1C661B8EBF14C6E4
+:1067800007F8DD20F9F3B0FE867499D5C339547A41
+:1067900033CCC89F5C6BF93CAEA618F3E550AE3025
+:1067A0004AE624289745323A37589F0FFB57013C59
+:1067B000FADB705CB610654B285C2AD4F556B5C47C
+:1067C0009817EBDEB79AE474E26B4A387E214EE10B
+:1067D000785BE92D4A5E87E7EDB64B44B746C5ECDA
+:1067E000C075A9F09DDFB6CE9412D4FF5B158FC59E
+:1067F000291CCF0A52FD6902EEF7D60807AE77BE14
+:10680000D46242789E83F3831C0E8B257F1A8EBF41
+:10681000D8CAE1700E3FDAF4E7DAB33E0EEFAAB65B
+:106820000AA2BF1B8DCEE475D0FF4658A71B9EF36E
+:10683000D7EF4A13F009F42E207F905CC9CE207A5E
+:106840003BFEE0F5C9B47F583FC2DBEE90A722DFE4
+:1068500001BC21B9ABE14F7926A76BADDFE029463A
+:106860009A77F0944BA3D7AAB5EF51FD22A0579485
+:10687000B766F68280F5666084E1E837094786F6F8
+:1068800036C01F77620FFDCE6781F9C85F17AD2D47
+:1068900062AE20FE03F2B6E6B930F09A87EBCD2265
+:1068A000B945E70D74F81AEBDF539FAD9E7759AAEF
+:1068B0009EFE713C1CD7A1D567FBD36E4DEF69AF2F
+:1068C000CD5BD69FF7437A403C74A8F0C1F6CBA9C4
+:1068D0003D2F833C5EDD80FCE13ED16711F0F9780D
+:1068E000C3402C3F0BD216B6F6C5F297DE9D0BCFF8
+:1068F000CF1FDA548EFBD3D6B118F41DE41337AA98
+:10690000F2B9CA1F9E5FFC6292EBBA295941F8F3B3
+:10691000C0EF4720FFFEE2E977D210CE1FDB39BF80
+:10692000FBD9EF1F37B1D49EF55736BD67AAB00526
+:10693000C38BF3BBE65107E9FC168DE2FD1679BF68
+:1069400025F9C5407EA5A59C7FFE15DE6779FB5A1B
+:1069500007B577D9FECCCF7F1093C4C40B9FB77611
+:10696000BEA1E7FEA8C9E94F407D34B54547FFA168
+:10697000FBAF50D75D3585F3B71B543CBEA1BA952C
+:10698000FA5536553C8E7AEF7C8D7EABF4EFB5F33D
+:1069900039B5D644E7736A6D5A23EA8BA7DAF9F959
+:1069A000FC8BD83E7625B4FB62D9D65B1253492FB7
+:1069B0004946BD04CF07F5D21B55FD74099C0FEA6B
+:1069C000A761CEE736D4CBB4F292C7F8F92C7A7A25
+:1069D000DF277F9409FFF8FEEEB3F890FF56B63F2D
+:1069E0007BE84A783FBFA9D59402ED3C5352083E5C
+:1069F000E7F87C4D86C4A2617F4D9B4CC8073CDA0A
+:106A0000BE43F05C832B33723EF328E8F0CD315C5B
+:106A10001E09FD7BDACF674A3CF211E61EC2B6C6FC
+:106A20009DBFFEA7553A2A48759849AE3544B1CD69
+:106A300012AEA3E27E36B677F9753482D305485D8F
+:106A400005E9F3E8144732D285A6BF86B6DFAAD29D
+:106A5000D7E0A8F6F9B8DEC1B120DF01C4BF895480
+:106A6000B251EFF9CD9556C9E3C0FE2E19EB2D5664
+:106A700026A17CDF6C90C7117E827E7F4F22C232BE
+:106A800090857C6FF8B2C0B7B83E44A78871FC69A6
+:106A9000877DBFA3C20B55F181FCBD1F9F49C67600
+:106AA000E25391B51CFF42F50CAD5FA87E11AA57C9
+:106AB000F4B6BF3D17B9BFA3292E1FC98908266D9B
+:106AC0008EA1FD2DC7F2B9FD8D628A01FA97FFF202
+:106AD000F24DA84F1EAD57769BA1FEE81D36EAFF8A
+:106AE0008FDA6FE83EE75755E8F6798E6E5A44B272
+:106AF000334EB56426935D07360F83FAA3B7461865
+:106B000010FE4753B8BE0016A01DF5C46DAA1D891E
+:106B1000FA383E511F6723B93E8EE5A755BB12F5E3
+:106B2000717C7F5CC5BFB248251AE57277BD5DDA1E
+:106B30008CF0F073BAE9AC1D4670003D81F36355EB
+:106B40002FE89402F6FE417C1AE4C77D28EF58ED49
+:106B50003086F65D67CB51BB211DF192AF4F6BBF05
+:106B6000C2D4C2EEC0760F0BBEAD306ED48AF7F23F
+:106B7000E2514EB7A56408D06F41ED69E2870B6C16
+:106B800003658672DCE66A9C88F5EB53A4D5D02DAC
+:106B9000AA2DA3B316FA2FF68E24FB798520937EB7
+:106BA000CFEA05B22B996A1F2CC1BFA0BCC4F6C6A0
+:106BB00070955F1A905F2EBAFF8EC644281F36B0BC
+:106BC0006E11405360289A8AE5820D310E0FCA5B20
+:106BD0000FDF0FDB087CD4DAC3474F4F72B26CA4CF
+:106BE000F7B3806F30FE68581BDA512B4CED0AAEBC
+:106BF0009F81DEB195E17A9DA4C7AF52F1A2B3EDBA
+:106C0000B05D56CF07F5F3E1AEEEC3F7E0B9DA0CAD
+:106C10008E6619E5BBBC5F46B8BF2532D4678733A3
+:106C20005EBFDCCEEBE149FAF1F24DA28F917E5CC2
+:106C3000363080FAD77A91F8E2E24D250351DF58D9
+:106C40000C65945F1B702AC0A7C6B61CDEAE35EF7C
+:106C50002137F0D3648139911F1D33068A101E2716
+:106C600037C5F7AF477DEF66CF0806F5559BEE4970
+:106C7000C6E7C94D11F3908FE74A45B931A8FF6CBB
+:106C80008CC940BB5FA3B3F46C2E0F6EBA39271EBC
+:106C9000E5DDB2BFEF795402B9BA187054423F48EB
+:106CA0007B94CF0D4D96ADDA9E2C026AD9E35C231E
+:106CB000116EFF62D8397732CA61C1B72D91DACB34
+:106CC000F1521F76F371B42B014F6FBEFB431AE7ED
+:106CD0002BC3DEC2F9D07FD9CDCF47E338FFF260B6
+:106CE000C70409DE1F1BEFCAC4F13F17366D93D0EE
+:106CF000AE5DBF692CCA8FF1AA7D54D0DF39773ED3
+:106D000087AF63B3DCFB7CD5DB0582A7565EE0EB87
+:106D10006766A897FA9959C2A7C4480F3E29B25A84
+:106D200094EF9A5EA2BD9F96CDF9CFC97E2DC9780A
+:106D3000FE4BB7AD4B46F9F1999D975D5BFEB4F8FC
+:106D40004E5887ABCD2031C03B979191DEBBC8CD6B
+:106D5000F569560DCC24B167FEA2EC2882F3D2F57A
+:106D6000993AB9878E197CFF9991E5E33A867ABA08
+:106D700033507FFAC8E85F8CE7FA11E8A7E8974933
+:106D8000CFE6F8F7518B3815DFBB57080CFD4F1FC6
+:106D9000B53C6F1FCEFD28E4C7602F9B7C5BA1BD77
+:106DA0007D7CBB1FF9DECD2FC48C4330E689E9F131
+:106DB000883FCB7798A60EE6FA145AD36C99D16F18
+:106DC0000E776E37A97AD4B9F20BCF9A11EF973DAF
+:106DD000D54A7E0550537CA8DF2C6B7FF68D413061
+:106DE000DE2DDB2B32711EADFD2D2F703844B080AF
+:106DF000B92448AFAE18D5BF7130F0C8E5D9F9AEA7
+:106E000007511FC273BA12D424655245BD119F1297
+:106E1000ED9319BB491F07FD8AECEB9BBD7CBC9B26
+:106E2000471D6C4CA57D15C5B2A0F3BF2DDB44E713
+:106E3000A5F5877D533F8FF5EEC702B05EC563644D
+:106E400011D742D9C83EDE86F063D1D256DC879195
+:106E50001D7B039E2BC57EAC199E1B6B96FF2BB52D
+:106E6000AFB748223C3D37D73D1380F964913919BB
+:106E7000F47767D7D0786E33973FEBA29E7EF846C3
+:106E800028D7CEB13900BDA11C4DF0D9F90B03F1C3
+:106E9000F944D6BDC700CF78065404001A92EA6AB6
+:106EA00021BEC3383F5E799BEC437E0C1C5C403CAA
+:106EB000FFE6951399B8EE6B87064E235E99EAA715
+:106EC00057E402FDAFCF56E1921EC8C4760376ABFD
+:106ED0007CCD7880E4A32941EE8FFA8A1FC7C2F5E2
+:106EE000FDD54078B053F03F8EF36A70DAA7D2FB3D
+:106EF0007319AE4DD9F05404D3ED7E683F5B8876AC
+:106F0000E07E0FF417D3C60D433FC4C72938AE1B2C
+:106F1000D0561CDCA3C766AB4B370F9AB41EE132C8
+:106F20000500CAAE065B26BD3F3342F95E66E8B691
+:106F3000C03AB2BBFFB2A91ECAD2AFFB3111449511
+:106F400027229965C3F8C26ED828EC6777FAEE4518
+:106F5000B8CE7BBBAD0CE1C4AC7A3DD76C48F4FF36
+:106F600012F1B926DAC112500EB567203F62B7D8C8
+:106F7000C83FB3E06C20EDE72897FEBA97F4F49F82
+:106F8000A5BA5E46B80E1295C32EA8BF57F20FFBE6
+:106F9000158E5F1BE5A8E7728405AF7FE71D7F8D27
+:106FA0008E857EDF748F303E03EDBE51AC0EF4E76C
+:106FB00075DE39E6B5ABA07CB52A4F42D7F54D82D8
+:106FC0006C44BBE39B6EAB1FF5906F6C06F2736471
+:106FD000EFDCF321FA21B3AD36BF188DFD4C5F060F
+:106FE000CB1B762029E6F8181231EC0780E74055D4
+:106FF0002E5DDB4F6F3F7666733BA853E53F46D966
+:1070000041703EE536B266C44306659CD768959AE2
+:10701000617DAFDAB62D40FFD5A9EF53FBA1DC3877
+:10702000B573583F96DE3B5FEC407D02F484884C9C
+:10703000E5533C7F4DBE96AA708968B9DE84F0F0B6
+:10704000003CD0BF566A33F82DE85F9DA38703ABA1
+:10705000ED2E47BC61866807D20D9E2F9EBF2C186F
+:10706000BAD955E79FF7756725FF2FA1BC00CE134E
+:10707000E15A7EEAF8E5BF62746EDFE23AE01C1B7B
+:10708000AE603DE7F7BFEDBC98D1D184E7B052B414
+:10709000B7E039788C5CDF73036E6D8DA16EDBF029
+:1070A0005C567A86D3390DF4009F403B0598DAE6AA
+:1070B00038E42B07A9FD56CD9F36AA86F84CB9C7F0
+:1070C0002221FCBE8B8CA6FE0CCED534281C9FE161
+:1070D0007CA5B68A115F59985E23E0B927E00CB011
+:1070E0009F4E43C08EFB0C44801609CF6B725255E5
+:1070F000FD1B3882EA67C5FE8FDC61DF8CFC46B47D
+:107100000E7EE4188822D6D41D3D1AD6D526B07638
+:10711000DA9749E51F4B6DA4CFB5C5F888BFB59583
+:107120000E71E05EBF616A7D7524F197AB0C062A93
+:1071300077CF1F48F6585B0CB0561C6FFE68D21B09
+:107140005EFC3B8F9774A7315E9FC146ACC7FAA225
+:107150005134DECB1ABFBACF4EE3B515298991540D
+:107160003FD080FD5B535C137388AE793B503CA8E5
+:10717000DD860D4A229EE7866233B57B4870CE5F7E
+:107180008CE35C6E23BD31303FF2E96DFC38FDE8E5
+:107190005FEAACE5FBD6E840F3AB0F751F7E18F94C
+:1071A000873B1B4E04ED43EBD70B10AF1531DA01D3
+:1071B000287CDE397F770ECF59370097C545769208
+:1071C000BD2EA73104369C9FC4B2114FF6003CA1DE
+:1071D000BDDB04E71CC7CF79751C9E73E1A6E07385
+:1071E00086F1DC2BE1BDB03CDA214CA2731E85E3B5
+:1071F000D7B24807DAD7E7CEEF555F063E4583237F
+:10720000C102B0F83CD5353F27AB478E3CF209ECC4
+:107210000FE0526E0964B5A07E6E60D5ED61F8C0D6
+:10722000A21C6E1F48ACDB84F275A186FF7521F8A5
+:107230001F1812733C4AC57FE8F74ABC73319EC3DE
+:107240005742C7047CB9F76FE2BC70E3DF9CC3F917
+:10725000D68138E7325CDF70E3EE21B7A1BE7187DB
+:1072600085F45F7676CF109CF77729CE9FE378116F
+:10727000C3BBC9BFDE99D86DC2FD75CEFF3C09F511
+:10728000AC85B57F22FABCD8F5AD8E1A6B42B91920
+:10729000939F610A40FFF8FC8CD7F15C0ECEB2C818
+:1072A00096307E905DB32626A13ED4317D6212F2E7
+:1072B000CB8E245833C953871DF9A869FBE5765C4A
+:1072C00067477E26956526ABE5923EF9EB17C05FD2
+:1072D000FDA0087C06F61A3E4F80BDE6077EFB291E
+:1072E000D86BF83C0AF61ABE3F0CF61A3EBB56396C
+:1072F000E87D47FEB0ED8817675AB81F6591D11138
+:10730000562F5BF694C8FC1A7F83FF6EDA12A52B0A
+:10731000576F8CD5956F6C030CB2F694ABD60ED329
+:107320009535FDB3D23B46F7DE5597A92BFF3F03BA
+:10733000DF260E5FF497FF6F822FFED682BC2BC133
+:107340003F00BFF7654D233EDA21B09A5878C64812
+:107350009CFF199D02F9DDF0D70272BB18FF00BA3D
+:1073600031DAE406ACF742FB5F435BB47DD1FE60EB
+:10737000CC61AA80F7A5F91112CAF3B9AC86E86C02
+:107380001E6BA1E70DAC9D9E65EC003DCB19A7C31C
+:107390006F2A0213F0F9719CEB53A4D36556D7639F
+:1073A0007168B725B946C6223FB2F527BBB4B7739B
+:1073B000420D9BA97AAE6D82BA2FF8CDC1B543BFFD
+:1073C0008351636FBF5DEE99471B1FE63B8D7CE3E6
+:1073D0002B139F675FD6C424E40FCC3940674FF569
+:1073E000365FAB2A272BF2399CD0678BE563A50269
+:1073F000C58B77B55ACCE85F38B6C6A4EAEB77936D
+:107400009D7BF810F7CB1C6B98968CF857DF3A32BF
+:1074100019F1FC98496EA805F81F9B0CFCDB417E16
+:107420001C07CA8723F976EA0F92223A03CE6D91A0
+:10743000BABF23B2C37C07B42F4D1499DB81F1F49A
+:1074400094685CBFB6EFD07557AEB5E8F060F6242F
+:107450007DB994997BF02D05CFDBDC538F7A925860
+:10746000D6CFD587DD5DFBF1D2FDAF05E16B72AE06
+:107470003D0EF51A36914DFC41ECE9DF1B7CB57CE5
+:10748000060DBE1A5E7D9FE31C999B45AF29DE86E3
+:10749000717494C71DDB391C5BA3AEBDEF2A80431A
+:1074A000F1FB22E3702E777F84F8BC83FBF543E782
+:1074B00009205D8F447AE5745DE17D8FECB78575B9
+:1074C00045265C5FB1AD3B09FD4EBBEE1A9984E7E2
+:1074D0007270D6C824E41B7BA68F7C64058CDB55B8
+:1074E000203A2C804FBB0A4EDF87E58E3A51C27995
+:1074F000BBB69F56F94BF7BE89B0BEAFF34D24879C
+:10750000BAB6FF73F84CF10EE03330FF191FE733C2
+:107510004B8C4ED608F32E01B8A01DFFCFE63717CF
+:10752000E233074DCE3CCCDBE8AA171CE87FAB9FCB
+:107530006E21FDE120D08785E353C30AE49393C015
+:10754000FE9510DF9C596853766C1F3600E1C5DC50
+:10755000CAC151137AF07D51DD9202F4AFB3B5A6E2
+:1075600023A877A33304E57331331E0904E1A9EBA3
+:1075700005534F99F0DA78241084D7A1787A1BE26A
+:1075800069540F9E9E616793CDA9BCFEC0C01EBE0C
+:1075900087BF60FE728BE86FC478BF86B7FF39FD86
+:1075A000BD72541280AFDC9D0BF8FB8B7129AF04C8
+:1075B0008420BE72917CAC35EAEF24F7D645FD9D60
+:1075C000E4DEA1E95CEEED9A7EFDEEBF20DEDFC5D4
+:1075D000F1BEA37422E1658709E419C0EB605D6622
+:1075E00034968FAE2D213AD3E827749E2E15FFB521
+:1075F000760B8DDD264718FC74D589BAF34C7B6178
+:10760000413FE7E5BDAF5F1B576BA78DBB3024AE95
+:107610001B3AEE13B9DC0E4DDB52D6E7F86000F6EC
+:10762000F4A33C94C81E7C15510FB89EB9013E5D71
+:10763000F91C3E5D05D7133D1ECAD7E8D2C5301EE2
+:107640007B708EE843FDB52BFF34D1E919A0531AA6
+:10765000A397794FAAF4795CA5CF632A7D6AF5E2F6
+:10766000D607E7DE80E3D689C4A70FCEC91C80F316
+:107670007DB6258DE685F550DED15BAF2DACAC1F18
+:107680004EFCC18EFCEB10C001ED8492D212B2A769
+:107690004B4C8E01E1F484D07D878EB76B9685F2DA
+:1076A000C8603CE277C57795B046E40B0007C4CFCD
+:1076B00043D81EEA8BB7723FF01E6C1F170CA791C0
+:1076C000A4AF1CFAADE040D161DAFE373B9EC35255
+:1076D0009F9E5F2C591FA53BB7C52DB1BA72F1749F
+:1076E000BE8F4375C30684CB6BBAD0F969FD2FF604
+:1076F000FC6F52FBE39A7F203DA5BF6E3C04927E57
+:10770000BED490FAD121F5E374E50BE1E361152FC6
+:1077100034397238425E102EBED45568A90ECED3CD
+:1077200088CEE3764B749E1AB7FF917235224FCF05
+:10773000AF2ED45FE34F9FE738A53C94A3FE12CA57
+:10774000DFBA587E14248713F270BD01C18CFD5B33
+:1077500055395BDDCEF16E5DD4FD947FF395AAA71C
+:10776000035E12BFFF5AE5F75FFF412DFF5E20BCAD
+:10777000DCB3636534EAED27B68F8C463BEC48BB3F
+:10778000271AF9BECCDCD157023E7EE904F909D3B1
+:107790009D6CEF5B7E7EA6F29D13780E2437253A12
+:1077A0008FA3AAFC3C8CF293E4FD287A1E44F909CD
+:1077B000F5739E55F5F4DF0A44FF4B8D2DE1FDD3A3
+:1077C0005BF4FCAA7A6354889CD4CBCDAAB58375AC
+:1077D000E54AEF305DD955A7979B796219F1F5130A
+:1077E0003E0EC792FC4C5DFB13B21C2D117C381C65
+:1077F000BE36C9D18867477CB1D1C1F4A2F1DF831D
+:10780000217038867040FCF496F4892747D5FE5ADB
+:1078100019EC4213CE5B6275BC1E877E84B5820371
+:10782000E35498EF3709CEF1C09C8CC79B83F48C4E
+:10783000F7F344C297C3DE3DE5987775060C30F444
+:10784000F3FEA96E4F32FA572B9E8A22BD2974DEB1
+:10785000AA023D9FF9B2A128FB23E857F2BEE8B384
+:10786000223C0A62887FCD7956F48950EEAACB89F2
+:107870000EDEC709950E35B9B3C45813F61CAB37E5
+:10788000EACFB1A4A09EC6E978506817FAC173D7B1
+:107890006490A4E7F72B31F2FD2F794A24FFEE1212
+:1078A000EFB7FB30AEB804F4405413FED4E42944DF
+:1078B000BC3EEC3419889FB6C716227CDC7344CAE0
+:1078C00083DDDB348CF0FC4853CE409CAF4985D33C
+:1078D00089ED168370053C9D26E6277BD54FE7F999
+:1078E000A5B784E4C609840BEA414689E8E2813CF5
+:1078F000EE973F0CE360BD01E804F5E12E9F98EFA1
+:107900000B431F0FA8F31C3DFB2BC29F377C7BA2B0
+:1079100051AF38DCCEC73F5A2745637CEA1D6FA6BE
+:107920009DD65700E3A2DEBBE37A929327BC1C1FCF
+:10793000719D641F3671F9D1E15D74FF6480C75792
+:107940006B45D23BBF6A2A299C8CE7BDD644E59C97
+:10795000A2528A6F74F8B87C39E43B5A8EE777C23A
+:107960000BA70FE5FA1D13F78D8FC37336113E5425
+:107970003DA53F97D2B57AFA825F74C604CACFA4F8
+:10798000B82CA81353D14EAA4C00F909947BB8A087
+:1079900084F22A8BDD7A7964614526C43BD42FB109
+:1079A0005DE52325597EA43FB740F272E10B3CEF21
+:1079B000DAB4E56A9277152D16DDBCC5757AFBA899
+:1079C00032C41E0AB5977EB4BC30D5948793171D78
+:1079D0009A5C60D25484FB1130AC9B33E0FD0B22E7
+:1079E000E5239FF14610FFAC5878EA1A552FBD16D3
+:1079F000F18039DC6C9266A707D159A5570CD1D319
+:107A0000F5F005FDF938EAC74DB1AA1C759790BF8E
+:107A1000EEF31CE510F1FB8BB5BF2F5ABF2D57F5C8
+:107A2000DB72D26F3B4A2D94AF79109B04F5DF5582
+:107A30007A3DF9750ECDBA9EF4DC43E7FC3A4ED59B
+:107A4000AF730D9DDBA102C067921B0EADDCA71EBC
+:107A5000A1F18B4FD57338AAF2C9C32A9FEC52ED1E
+:107A6000AD46555E78557971A840B5B7E218C90B97
+:107A7000A3516117C3676E6C8B0A910FB12176D445
+:107A8000E090F3D1CB8B6545AEC8A940F79684D181
+:107A9000BAF726699CAE9CB66527F98FCFC83C9F84
+:107AA000E81EC4098C9794F2FC2C666D27FF71A91F
+:107AB00043A6FAC1182784F66852611E89869FDAA8
+:107AC0007B298EBFD7CAFD61D7F5D82EA59DCA9E4A
+:107AD00052C6300F66B8360E80A31EF484C1E8C7C4
+:107AE000867912C040C3F61ABE0F99D34AEDB2ABE5
+:107AF000992440BBF4A929C4CF129842FC65E03216
+:107B0000A660BE0BF33D4FED1EBF1BF601781FF0C4
+:107B10005C47767989359AC7BB413EF68D67F53C5F
+:107B20007E991F4B7ACB102347CD5EF1566D77219E
+:107B3000BC0DD283264F25FA34903FA2356AAC099A
+:107B4000F1B4D8E624BF01E0F582DBD15FF98A9970
+:107B5000FB094AB97FF2E0F4898FA0BD3BF6191BFF
+:107B6000F9920F2E067C26FEDECDED84BA1237CABE
+:107B7000BD3FE7733937E6992FE97E44D776E6C0F3
+:107B8000F29EBAE74FBD8DF43247203BA3A32E8768
+:107B9000F365C69C98BFD9919FB39ACA93C030CE63
+:107BA000407A50561B711D00D766AA5F745FD67865
+:107BB000BA6F42F89BA0E6194978AE893DE5384591
+:107BC0002DB3ED544E28E0F9817F54F58376F53CD2
+:107BD0007FA7DA41DB54BA6953E9E6D72ADDAC095D
+:107BE000F5876EE47433C2E8B82F0ACA23DC7692B4
+:107BF00033FB0B8ED2BA81FE258CE7A64C179BC7B0
+:107C000003DCC65802C4A74B40ECAD86FD4C29A846
+:107C1000A7FCC51217A37845F19C7A5A5F00634B05
+:107C200057A1DE542F886A3DF2C731B17E6A5F6C7E
+:107C30006512F62FC97F7617E6E196BA003450CE6A
+:107C40009D532F107C2A603C68BFABEE011AEF50A9
+:107C5000355FC7413BEFDF51C1243794D358FEEE67
+:107C6000157C9D4E8C871EAA7B7E17C17B0E87F7E5
+:107C700055270D3A7ACCF047EAE87AF496FEBAFA3C
+:107C800091EB07E9CA039CA9BAF6B1F97A7A8F1C7D
+:107C90003E4E57DF915F6240397B668E96DFC3FDB3
+:107CA000629A5D37E5199B01E1317796A8F9710D6C
+:107CB0006C205A5D8CFCBE4DAA9EC85A8631CCDF22
+:107CC00078FC4E03E507AC99E3B162DEC3997623F5
+:107CD0009D178C4B7CE4D04E238D6B4DF10AE8C789
+:107CE000BC17E02C06E97F4D9A7C53FDEAB81E6371
+:107CF000D07AFACB0C33C6CEB56F53F1E901751DBE
+:107D0000C0B7A798705E27C793D802663041FF01BD
+:107D100073B89C0EA5CB76B5FFEFD4FEDB547CEC9C
+:107D2000CA7F7C7524C2651E237D244F5CB63A024F
+:107D3000D751C0881EDBFDBB2383F5C73FF636CE87
+:107D40009CCC3C1AC7CDF9E8E8D9822702CF7563ED
+:107D5000E0F377E1F9F2578DABA361BD4F08AC1D9D
+:107D6000294AE39F9AFE7DD5D74D543F7A1C9868E7
+:107D700050FFF2D7CDBCFD0426A3BFEB8FAADC6970
+:107D800052E9276D4B3AF917CFAC3793DDB3AD709D
+:107D9000C9E63658EFC899773DF102E24BE15D7FC5
+:107DA0007941EED1F34B0A133B317F7FC42A3B4329
+:107DB000FEA0CD9BB6E5CB6C5AB7646488A74F6E26
+:107DC0007DB112C7FBDDB6488302E33FB9D948FC59
+:107DD000E5B27B1FD9BC9E9DEF8F29C9D7DBF9BFC8
+:107DE0005BB3EE89EDF8BEF6F9C78E05E5E974CC14
+:107DF000BA2709FDA6075755B7E5A6F5CE3F4BCCE8
+:107E0000CC85F1BBFC97BF7CEE1D98FF03D765E3E3
+:107E100082ED80CFA7727DE7E0AADAB65CB0534767
+:107E20008BEAFD15A37B35C263F44B0365D4DF8079
+:107E3000148C2E8065FE8C088302FBFBC067DC443B
+:107E40007C60C69A343CCFEC270B769FC4733EA46B
+:107E5000E27B2FFAC841F59CCE954D32C1DDFD8AFB
+:107E600095DB378A9C44F6B1434E2A0ED2E70EDEEC
+:107E7000A5C5971C9F201F2F2E8BA2B8B216771175
+:107E8000F3BF6D403EBF70524D9644EBD7C7F1072C
+:107E900021FC3231CECBE3F56EB791515E106C0D03
+:107EA000E964A5389AF24D3E5CFA0B8AD7BBEB2DFC
+:107EB000525A1CC50D9EC1722DF01DCB788AE3FA73
+:107EC0005068274DE37E84D3F33C8F98E5DEE1EFE5
+:107ED000BDC0F998D4F3097D9F348D9F8B07CF25C2
+:107EE0004D772EBBF19ED479E7126D25FCD2CE459D
+:107EF0008C6EA2736156DB28CCFB88E72885FBD902
+:107F00008772A8F310F7977D50765BFD4A289F3A59
+:107F1000DB8F215D687195F2049E7F4047027CCB28
+:107F2000A4F68F57F56EE463A87797AB7197CE05EB
+:107F30008CE22EDA78676AFB497CBC5B486F2EAF17
+:107F400001FA475912F52AE9170DC3787E44B9ADF5
+:107F50007B01E5AB0A0607C6CDE343F47A37ABA154
+:107F6000F5C6BF2F923FDF10B596FAC70378F0FE33
+:107F70002166E8B260BF1218AD984F42570DE52058
+:107F80003D4BCDD78DAF7D89EB4739D03351379FEE
+:107F9000F003ADDFF3A9887CA0D62223DFC3DC2C5D
+:107FA000E4DB04BF14C4A375D45FBA8949788F8316
+:107FB000294CC67B9A823A5FE8FA613CAE17827E12
+:107FC00086FB15EAF8FC1B67F27B206C279383ED98
+:107FD0001616BC9E61BAB2EA27D3974D09669D9CDE
+:107FE000FAE06C49BF9A3EFC35A1FD0DB2B36FBFFC
+:107FF0006F7590DD95DAD35ECB13D3E03CA8D672D3
+:108000005888EEBDDFB222E5E7D3804E6DCC99FDF6
+:1080100036C0C3F5BE48F2CE10B597E01188E0F047
+:1080200039A7CFCEE3FA2E68E7F5946F0DF20ECFA5
+:108030000FF3B44700BE33B73E4F409B578B2F75AD
+:10804000AAFC38901258E00C038F46A4DF2CE4E71A
+:10805000DF50BCBB1CF55BC0E5C0EA2F74F73F4E98
+:10806000164D69C47587E621687AA976AFB4D3CD79
+:10807000E56CA73B93F8CE19666F21FD3F94DF189E
+:1080800019E57DAC14231DCDE4B7BB9BF2466ADD38
+:1080900016C902CF590EBD3F66F624BD3C28526278
+:1080A00043E485DEDF55EAD4C78986B7DD41FCEBC2
+:1080B0000CEA4DC4EFF87A8C6A5E9909EF978868EC
+:1080C000AFBBE9B957E5CFEFAA7A6604F257781F3C
+:1080D0008589E5808F7616A0723F44F96198D22E8B
+:1080E00053BE632C53A83C80B9A8ACE54126321F8F
+:1080F0003DB5FC962416A0F250D487442429999EBD
+:10810000C3D00E19867A9EE35CBC87F22673522890
+:108110005E50C4944FB05D41E65724F70AAE67EA5B
+:108120003DDC138B14287796B29E7BB9986792C773
+:1081300054E4FC7411DE3FEE9CAE958FF3F214DE36
+:10814000FECD3F7DF138DED305FEA5D67FC6EBCF51
+:10815000954F2E9A82659381CAEF637B280FC8538F
+:10816000DE9A06E7FFC9344678E4C955DE092E0FCA
+:10817000CF55F621DE68E5095395FDC1E59539CA6D
+:108180007BC1E5C773948EE0FE5D79CA215ECFF3B3
+:1081900097DE37294968EFC2EFB7C2048E87F87BB4
+:1081A000C3E4FA04DB294F09042F0BF0ED66E2DB90
+:1081B0004E86740A6463C53C22E033E6DBA19E8DE3
+:1081C0003353BE9F21CA96DC973F3294BE0226B637
+:1081D0001DFD744546D717440F217C4F70FFE9AF52
+:1081E00098C703F4908D7A7E408D8704EAB83F40AB
+:1081F000A313ED7DE87C17C27BA604F979537BC6F7
+:10820000ED6DFDA1787C40D5F70EAAFADEFBAA5FE2
+:10821000FADC7E03C698E3D61EFAEE9D7F1AD9F1EA
+:1082200020FE79FE7E8F2E3071F921A1BCE88C08EA
+:108230007F0FBBB7F5EDCF991A974FF95E43248AAC
+:1082400033308DEF737ED3897F021F1CD34FB35F12
+:108250001D5684431A4B98310AE66DCD67A4BF7A48
+:10826000727717D3F70DCA4082C1BA8EAE38861422
+:10827000C78467B83DD192C468BDF6142902F5A53C
+:1082800006956F5A58CCF4E1B8FE214692B7A1EB9F
+:108290006E88F60918571CE48FE0FE8D38E68B8057
+:1082A0007106E53BF2296FC52D4AF9582E6385A367
+:1082B000A05CD926CAF930CE9EB6125605E3564DBB
+:1082C000023E4719E93C9FA2BF8AC7632C8CF22D5E
+:1082D000D60DB051BCDABB66E4AEC5C837134596BF
+:1082E00006EDD31BC6E5A3DFD363EBDF9F624EEA47
+:1082F0007A3C36C79B780FC32D19F83D1249B162FD
+:108300001EFAA615C67CE4E749CF8E8F1683E07F60
+:10831000D47B2A02F3DB1F930C54FF585DB6F5465D
+:108320001BDE23F42B9467201D516C30EF0668137D
+:108330000FE3DD5F7DA46504EB1D1FA2F3CD3A3C86
+:108340008D729843FCA07ABFA529443F28C957F3F2
+:108350003426B00978CE573C71D6847AEE429B4CD5
+:108360007EF4EC2681F25302BB1CC9784E47EF1B0A
+:10837000497E736F93A8FAAD1DE4B70E24B164BCB7
+:108380005F53D122905E2C7ABFADC77E4347C98927
+:1083900038CED0F1DD89C1FEB2C7EEFA4504F25104
+:1083A0006F9941F573331A4796156B0AECFF53AF7B
+:1083B000C0F3274C9280F798ED0F8A11B8AE2E13B8
+:1083C000F75334033FC5FBB9CD538AFBA443D3F71E
+:1083D000B0CE20BBA5212E3512E7EDC15F85FCEBA9
+:1083E000C75A32293EB2B9299BF24142C7B9771523
+:1083F0006B47FBA46195959EE7D5273B931DD0FF66
+:10840000D3D6298D20A4D8A7BB9626E0FDA0C52DE4
+:10841000161611068F8FB54EA4F916E33D669CB76C
+:10842000A5C88C72645ADB1433C2EDDE55CAB3C1E1
+:10843000F31416BBD6205D46B53C4B7862637E379D
+:10844000C2F3DFAE519251BF3896C6C2E6493E90A4
+:10845000CFED8477AE71D27D924F93C2B75B97CF49
+:10846000F335A3A7CBFCFEB891BDBB04E05C01F4DF
+:10847000540FAF8E36654623DE9AD83262521F946F
+:1084800095B8D19E3B8D7A3BF0F3C6BBE6AEAF828A
+:10849000760D778FD88FECE30A33D79BD99F45A20F
+:1084A0000BD00B2B903EFF638E55F204F15FD41F6F
+:1084B000155D7E1A971BA626D16F067E6EDA79FCB3
+:1084C0006F68EF20DE2A41784CBF09AA5DA0E66BF9
+:1084D000244C206D9C7E0D33E6FAFC0CE32E8BAC15
+:1084E000789EA17AFA797872DE3A82C6473D37974C
+:1084F000291141EB0096E0277FB98BCF7BAE9D5AC7
+:108500006F0406F34390FE1E5AAFED63E47A3DBD5F
+:10851000BE93CFF542806F9FF1BACB7CFA7E9FE588
+:10852000333AB7D1A2B2FB38CAD97522E5558F5973
+:10853000C7E3FF678630F213F5369EC67FF1671CEE
+:10854000A8C211E0DA18574CE7D95B3FB3EF80922D
+:1085500032B6C73EBC2C41BF2EADDD67E7F6751BBA
+:108560008BE4FA603BDA67161FF0BDB1F83CA0A0BF
+:10857000FC1EB56985D4D7BE43F919FE6458EF6275
+:10858000F5C864C035E40F9FAE17543D84250C9F99
+:1085900040571749FE607F2588FF015FE1797B3EE8
+:1085A00081E0D3DC7A74F3BDE487B13B782B7E5E47
+:1085B00063992607791E90764F9061686A604F7CB8
+:1085C0004A83E3C9DFAE7EFA097875E2A9E55FE385
+:1085D000D332A0321AE1794FDC9C6B13A1DD58B382
+:1085E0002F01F9E9129FE53CBCB36AF89282F7F3D8
+:1085F000F4F59684A0F5C37FCD3B9E585F89726ADF
+:1086000087D581A9E1885F6E1D7C02A9F85D9CAECB
+:10861000BBFE95EEE7474AA716507E7B9D85EE751B
+:1086200085C27789CA07987A5F43A3A78896910C79
+:10863000FD8B4754BBE9C85AB053A1DC586796F18B
+:10864000BB065D8E222521CC78E63A33FF6E4EB014
+:108650009D98DAB34F6DFC2E37F74336C2F84218B7
+:108660007FDF85C6DB53A48C990EF8BFB7C879F9B4
+:10867000F42CCC6F5A44FBADDD5ED7F536B4B97738
+:10868000A02B03EB8FAC1D36414047A451A6FB7EC7
+:108690005EEF73244F5AF03B3E60CFB7B41B2350BC
+:1086A000FF707B0D14BF6D698F8B1C8E72CA6608BC
+:1086B0001B675D349DC3AB479E38A383F5A1E65C81
+:1086C000AE0F09CF94DD9F0AF0F21EE2798A9AFE7E
+:1086D00021A97833C622117F96BC3CCFAD471FE25B
+:1086E0007AF519D4AB515FCAAA9282E5534334FF9D
+:1086F0000E4655AEC38DF730736C8CE4C750BCACDE
+:10870000807E0B1BF34D4BC1EF643818E6E7F6078C
+:10871000FD4706CC8E6FE3FA4EA4CDE650108F15C0
+:108720004E5756F81FC2337294C2701E63887E6122
+:108730000ED11FC490F282E97A7D42668E6884B3BE
+:10874000FDBEBEF338347F2EE84D74CFCCCD00FE95
+:1087500088A756379D4F34181244CF8A22C70DEC94
+:10876000D1FBF13E1BF7AF48142F129446F2DB6F9A
+:10877000CCE4FE8D44C6E35E83146ECF8F9DE4A6E9
+:1087800032D80F148762AFB248E4CBCB8A5CB723F0
+:108790007EA4001B40FBAF7F3A1388DC2F512F676C
+:1087A000B5171757FACD6EEEFFF31A221D9BC3E0E3
+:1087B000FDAF0BB81F2E720FEC0DF5DBEBAD74BFE8
+:1087C000254F7CAA89F069BC81FCDA5E7640427E46
+:1087D000F2ABE95CDE1F2A72DE3F9DE2B2CE14846A
+:1087E0007F82112C2A5076CDAA1F37E9F6D448D4BF
+:1087F0008B3F4C7C91E0E106D8A5C17F9B6AE3FAF0
+:108800008F82F78FD6AE26B8CA03B89F4CBB771EAF
+:108810002BF1FBFDCDCE536EBCDFBBA22095AFAFDD
+:10882000C8382315CA43EB0202D2DD3D76651EEA45
+:10883000254DF273741E2919B201FD65838DEC4D2F
+:10884000CB38C69E8EE1F5DAF7A31EB20FDC149C7E
+:108850004F52ADEEFB2121BCBE725501DF67E70E22
+:1088600000643FB48F996A7FDB16933D7EAE0C7037
+:1088700043B8B8B9FDFCC274DB62F770B28B78BD47
+:10888000FB2ADE1EE3A5502FBDFD7E15DAE38FA681
+:10889000849FF74B75DE47DFEA7E04E358FF59CF2C
+:1088A000E358BD9FB39F1980B76CB0B3647605F0F1
+:1088B000B9A5E679E1BE2373CD2CCE473A6DED0420
+:1088C0002F06F23CFA2ABA471FAAAF5A918E4E4B96
+:1088D0009BEB27CA9C8F644DA0ABFD1CF742C6BD25
+:1088E000B0DEEA4840FDD3B3B4BB01F98767D7D205
+:1088F0000FF15E7A799999F4D67263CDBFA31D64A6
+:10890000DCCBF35FF01B13880783801FE17DD36905
+:10891000D5FCFC164ADC5F2B3CF3B13307FDB18973
+:1089200046C24B4D8F1D6351DCE897DDA0E6B7339F
+:1089300071483DDEF7320E16C9EF1B55077A2DEE52
+:108940002F97E7EB2AF03FE4439A9E6B4B37EAF20E
+:108950007ACD2179BDC6903CE0AFA7AB79722A1FD2
+:10896000B2678DEF539F7A15EC605CE74EE043F8F9
+:10897000F4833D8CCFDD60AFE3F335B0D7D10FFE8C
+:10898000C6AA51F47C739583DEBFBD6A123DAF4B1E
+:108990000E98109FC91FCDBF33E717C8AFA7E19945
+:1089A00098966DC3EF76F0FA21331BFFD57D35D451
+:1089B000C7A9EDDDAEC5F49D3AADCCD62ECE4E277F
+:1089C0003F38959B67342F46BFCFE652C53A03F038
+:1089D0006480C15981DF7960775A286E11BA9F0788
+:1089E0006768723CBC1DCFF013067A3FCEC0197D7C
+:1089F000F8711E12F83AAEDAFBFE16A48F7E4546D9
+:108A000027E27172AA3E7EB07206D7F35E579FC905
+:108A10006FBB86F6755F5FA38FDEEA3D3B0005FA0C
+:108A2000F55EEFB5B36BB1DE13139EAE06AA74D537
+:108A3000EBF8366E4FB219406F83B11C6A1F0628DF
+:108A4000BFE4746D8E9FC8ED27D35B7712D25B575E
+:108A50008CAF1EEDC4AE5D4BD7E3774244A4372400
+:108A60000BA4378C7F68F456CBCF6321D21BFC3923
+:108A7000ADEE3D670ED26302A72FE1999DCB291F72
+:108A8000E32E9E47A3D15B8C9A2F1F25B593BD483B
+:108A90001FE6C07E407B1B04BCC773FC634AFE100C
+:108AA0000B1CAE7074F723E9AD6CC64FA3B77FBB48
+:108AB0002640F9139D294A02EA335EF5FB813F9671
+:108AC0000ECFCC3073B970B92F11C7D9A08E336DCA
+:108AD000C861F2FF15581D22CAB37C99C3356F7C5B
+:108AE000267D6FC8A7F6DBED5456CC80E780B9270A
+:108AF000C9CF3BC0C0E9F7C1B7CD8B11EF931A0EB8
+:108B0000164D437CB943247D3B745F1F14AA713317
+:108B100081CF0B9A5762701CF11E952EE53B3A38B7
+:108B20009F8F61521AAC27C12D15E7635CE86A0379
+:108B30007D4FA45FD1C11894CFDA78707009986F17
+:108B400082AAAF75DCF9F408BF76D3401D3DB7E0CB
+:108B50003E7AA3E70BF10FFB0C41E31394EFEB52CA
+:108B6000EF49FE58BF6DAF7EC4CBC3FB25AB66712A
+:108B7000BEE131F1FC0F682DE177019A8A5C4FE28A
+:108B80007ECED3FF764A7E17EE637934F995138C47
+:108B90005CDFC36F24F2EFE5B809CE5AFC4DD31762
+:108BA0006585E7172517BBFE80E36E62F22E94679A
+:108BB00036079B47F13590678817CB8A9417675023
+:108BC000FCE5D2F4C02F8B9457895FF7824F03AE38
+:108BD0005776F7856F538AFE63CF0F48FF65DC5FDA
+:108BE000BAB0AC8672B306819D84EB9DAAE6677825
+:108BF00086F07ACDBFEA1DA0C54F9542CC9F8C561A
+:108C0000E135C6E26415D0BF0BE530DEDFDB1BF0DB
+:108C1000E3BD600BDE2393D08FCAA87F4CADE093F9
+:108C2000B1BFF8E5EB182F32E5D0E744189BC4ED4F
+:108C300001EDFE8D94FBE3FC8D87353E318E8D4733
+:108C4000F8241BE40726C3FBCC87F33AF078B21E66
+:108C5000591C8BE272E2A68612FCDED6D2AD9F6E64
+:108C6000427FE8E47FB7303C0FD01FFDC6B0F95C0F
+:108C7000FF303942743570563CD71353C2E3E9E3F1
+:108C8000B354FD13F1344E87A76C66783C25FDE79D
+:108C900027E069E44C3D9E1684E06914CD7BE978B9
+:108CA0001A3B13F0F4559083B8AF17E72A0366F622
+:108CB0008197DF952A897DD507C507C8EE1BC12698
+:108CC0005983BF7BA83D5B515EF6919FD07FCD114C
+:108CD000CA8FF3D49EA63CE52EDB917D6807FD4745
+:108CE000AD450EF66781FEAED3D75B40AEB8C19EF0
+:108CF000DC304B247EB2E70E8BFF3AD46BEBF87D71
+:108D000084F2BA4D02E67B0FAAAE115CC0DFE21519
+:108D1000301DA17F8C62E8F19FC07F57980E903E76
+:108D2000BB0EE4B19BD817BF97A6C9FF31969AB77F
+:108D3000D04EF5FCCDE8588DE7CCA45DC88FA603D6
+:108D40003D617CF39A6E906F41E3BDB56312F9D536
+:108D5000AEFB1EE45F901F670A8C185CCEB126EA5A
+:108D6000FAE54929BAFA690997E9EA35BAEF8C5167
+:108D7000E32A595B72117FC40A9EA7305DCED0B53D
+:108D80005F57964DDF03B86232BF7F3773D464DD1F
+:108D9000F8A17AC1D5F03FA47731440F08D513422A
+:108DA000F5828533F5F740D71803D9C49F18CFABA8
+:108DB0001B7AF6DF880ED6C91CCFBD65A7281FC356
+:108DC00003F63FFA9B0607E597225D8C3507C83FFF
+:108DD000B761BE95CE63C38E27E8BB119AFF0BE83F
+:108DE00086E8686CB64479AEE9F65F537FB694CBFB
+:108DF000D950BA14EA5E22FD6FE36CD81B7E6F6D0A
+:108E0000760A977B3B03E48760779A19CA4DAF6473
+:108E1000A0BCB1DF08FE086118D2AF42F28925304C
+:108E2000C94BF992EFF1EF2932E6589388A6BF4279
+:108E3000798D80F6DD6FA979B488B711F9CCB17A54
+:108E4000327EEF97D377FFF1FC7C6C0E5E96AEE638
+:108E500065CDDE8E49602D98173B18C783B671B576
+:108E60004CF2905FC34FF543F2D9010FCDCFFBC752
+:108E70005731671394C51A45F537BBD4F87A37C50F
+:108E8000BD53054724FA3786894E8A7B473389E2EA
+:108E9000E283580D3DA3043F671E97C847AE00000C
+:108EA000A0BC603799E9FB19D94FDA187DDF68A9B2
+:108EB0007933E5650564F223DE7388DFC3DB60FF89
+:108EC00005C5099AF6F1FB04F724B93FC478E6A07A
+:108ED0003A81BE132E56F33882F8A6E89806F5625A
+:108EE0005D2B7D072EBEDA407EAD2BCC35BBE81C5A
+:108EF000EEB6D0F7E3BAA03FFAB9D6D90D8CE81593
+:108F000098C7397F2AFCBAAE7152DCA2EB6FFD48DC
+:108F1000DEB1103FA7C7C5F56F4F9C99E397EDD41D
+:108F200027C8B71BE322E97EDCBC6B6BF6211FD997
+:108F3000F09EE858ADFA9FD1FF3F14FFC0FC03B389
+:108F40003305F54E7375783FA59939F767A1BFF4DE
+:108F5000AE25097DE951BDC6456C06BF39FAE2E38D
+:108F6000220DE53C0EA2AD53DB67A36DB95029E39A
+:108F70005F3F312E52D64B5C24502320BF1F8AF511
+:108F800063113EDC6F7DA971919AC24B8B8B68FB9C
+:108F90009EA5FE5D0088ADE677505C80CECDD0B357
+:108FA000BE20386EC1F595E35F327F8F7186D96A36
+:108FB00079DF5307BF44BFFEDEDFEE7E0A9FD79DF9
+:108FC0007DAC6C39E045D1243BF97BF7FF32E641BB
+:108FD0003E9C3E7E30CB61D1F9EFF187F849EB1032
+:108FE000F8BDFCE0FAA29075651BF5F1805C9BBEB4
+:108FF000FDD4387D7DFE107DD9CC6A084F43F7BB88
+:109000003AEA6ECA936BBC8D39788678D079881726
+:109010002E9B8798C3EE4BC337E64821BA5FF73ED5
+:10902000A77BE72B2BDE5A4976AC81EECF9F9ED7EC
+:1090300070CF3B32E28799B9699C7C05F1E8BBDFD0
+:10904000A7BF4B311DC9E5BE11DA57E6F0EF459DCC
+:10905000174F50FDF9436B77B5E706C57BEF1DE869
+:10906000721400DE0CB59D12500F195AFB1AD5CFA1
+:109070009D9FD5271EA5D5EE69CF0DFAAE5F9AD17B
+:1090800069403F465AED1BF4BE37BDC720BB79FE91
+:109090005E9959267B4BCD534B53F126AD8CFB5B30
+:1090A000A5542E6F3698B87C7343B57815FC5F5B7A
+:1090B00068BE1BE7EB6726F17B1D0CB810F22B6D29
+:1090C000BC5079A6C9019BC2F5C8B4B287B85CD1BF
+:1090D000F205DB42F3E25C73113E427523B5DB9887
+:1090E000A3B6DBC9F5533683492897619F61F344E2
+:1090F00017A87EDADEF2D398663FCE79F343CCCF61
+:10910000FBD1F6632FE35E971C087BDFF636D56E46
+:10911000ED8C082439B81F38ACFE3EA374EAAD05C7
+:109120007DE8AF98578B30EDD55EB8C4BCDA8D6A58
+:10913000BC488B976AF9B5CCE81B87DFF91C65FB47
+:10914000F30D1407ED25AFF61EBB2380F7DCBD152C
+:10915000118ECDECD2FDEB5BA7737E5A5DC0E81992
+:109160001A5F085DF78602DEFE5091F3E1823EE26F
+:109170000A5AFB0F13C3FBE3BE2DE4FB3F775F29C5
+:109180009FEB7D8A4961E1F240B57CF7D0F7600F33
+:109190003D89EBD0CAAEFA34F2DB794C1C6FDD327C
+:1091A000FF9EA0A63FDA507F243DAA85EAA3ABB973
+:1091B0003EA9E959921AD708A527A08F3FE23C8221
+:1091C0008DD3ADA6279EA38FB9401F409743188F1C
+:1091D0002B19D4BCD121569E827EA97AD4F9F6D31C
+:1091E000F7F64BB29FEAB74690FD54BDF92DD4ABCC
+:1091F000D6D5723F61A7BDE62DFCFE81FB3D91F403
+:10920000A6DEFA6B76D447857A3B0AE38A888FF12B
+:10921000369F205F8E7654C0E482F595A31D65C30A
+:10922000BC555700E1166A4F75DDFD05E5BB82BDF3
+:1092300079B820EB1FC01F42FC4B8DD3393EEF1A8B
+:109240007E8AFC26622DB7F7C45A1E0F3596F1B8F8
+:109250008551E17E1433C82374056A7E940D0EBDDA
+:109260001FA52B89FB51E2736BFCA8079A26592492
+:1092700085E423F7AB6879ED632CBEB7F03E862713
+:10928000C3C8300F1D1455B2032D6A7C03FF410B78
+:1092900094579ADF24346FDA16E22709F5A358674A
+:1092A000E9FD268F0AF2BD93619EE7D7E7BD83688B
+:1092B000FB878D8BA3D06FF292AF61A6EA37791846
+:1092C000D7B3E343EE37E9DAC1ED22172A305785E9
+:1092D000C3BFF3E254E407B966DFE12AF483687E92
+:1092E000A8F86A151E6ADC07E18BF014F3393C63B9
+:1092F00042E0E91DA2C58554780EE0F02D2F709252
+:10930000DF4942784A3DF0D4FC54DEBDEDF47D6D7A
+:10931000CB1D16D94DF0FC92EC5513C213E1FF138F
+:10932000FD50E342E039EEE1CC07F03BC1E31F29F9
+:10933000E9C0E7844DB7C5DE00CF495B1F28C127D0
+:109340007B93C709FE7316E75798D91D4C8F636747
+:10935000C8BA3883064F0D0F7BFC778CFCB1E51241
+:10936000F7E797AB789886700BF6E739F470DBA0D7
+:10937000E64B1A736BDC68EF0E0D819B86871E84AB
+:109380001BF2BB18B3EC26FF5D9D80F6506F78385A
+:10939000B4EDC7E1E1FC59AA3DAFC2EDB9F599F7CB
+:1093A00022BC5ED858F20E3E5FF4DD1685F0DABEC0
+:1093B000E58199BDC02D3198CFEF991E1E6E5B8B54
+:1093C0005DD5B3E0FD750E9F91F82CE01BDABD9BD7
+:1093D0009BC659F5F1198D3FE65BC3C98F0BFB970F
+:1093E00096535EA1A76C39F1C7AE73FCB1DB8E79E1
+:1093F0008817CB1F2D85FCBE7D79ED77AF5F077099
+:10940000CDA93D4CF46704FAA373AB3B6C50F33128
+:109410005804C88BF832E6C7F8F12066F545099480
+:109420009F407CD38B79CEF881D2503F85F4C65FC4
+:1094300005220E261812808F63EED4152407EF9FA5
+:109440001586CFAE2B3390FF67B3EA1F944B9D2D4B
+:10945000D84E8B6F2D2B525A67FD347FE1C3D85FF6
+:10946000F31776C6B073FE35FC3E784EED2601F359
+:109470005006D5DD4AF221BE4C61281FB266CAFCF7
+:109480007BB3B912EDF77C7F5B770EDA099D78A389
+:109490003D83F0E077384F67EDE38407572CE5FE16
+:1094A00091CEDAD3B1E1F1A036E2D2FC8C9B757299
+:1094B000D25BCBBF63D26957DE4CFB11783042C51B
+:1094C000034D4EA2BC417C3296051E463FF620C09D
+:1094D00087881494979C1F8BA0FF44C17EC45EFCB8
+:1094E0008F1A3D74C1DA2CFDF09E70683E400DADC0
+:1094F000FB7459B67F621FEBBBE83C00352EE95187
+:10950000E3920B6B79FE6AE71DDFE5E17A4F978105
+:109510007D0070D95CE660787ED340B10AD882E7DE
+:10952000392F6F358074ACC521B578FED662E7114E
+:109530003CD7EB00A712FA635EAF1AEF19A27E07C1
+:109540003A04FF01CF3FC77130DE837240F3A3338B
+:10955000D41BED88DFCA17583FD65C9328117EBB19
+:10956000BA71FC753BEEA4FC851EFF20CF87FBC9BA
+:10957000FEAD6833E5576AFE2DAF9DFBB72A5880D4
+:10958000FE9D3C8A2320DF6EB5D0F71AAA04D98C41
+:10959000EFF717BB8C85A4F738291FD635C72A915A
+:1095A0001F6CE9B644E417E58D22C9EBDEEC92F3BB
+:1095B000E9EC47F21995EE2E81CF0C2EBC383E9384
+:1095C00054A8E733C9853F217EB67E969EBFA0DEB4
+:1095D000590FF3E4A8F4746EDF6A1C1FE3571119E6
+:1095E00041FAA8BADF503A3A4F2FFDBF8FAE66223C
+:1095F0009CC3D0D5ACC21F4757A58503FAA4ABB90D
+:10960000857ABAFA1996FF17D2D5CF691F17A02B02
+:109610006321D3E749C7F2EF3C8F8935F03CCBFF9C
+:10962000C379D25FCDE4FE8BD03C69C66AA85C00EA
+:109630006743E7A3960BC73319E34C964DAFAD1DB7
+:109640002DF3F182FD9D2CC4CFC942FC9AA1FA5D95
+:10965000183FA8CEEFB9F789BFEC1D0D7F3EF9F496
+:109660007F915EBB6FAA40F7C90B477EB71375D0D9
+:10967000A23595EA3C7DFB3DFFD97E4EFC05FB55AE
+:1096800043F7D51875B77A6FE0C7F93999E356FAF9
+:10969000BEF9BA1AE640B85FC8EFB9AE8EE74D6BB7
+:1096A00079CDCE57AA1E2C1DCFF3E9D0EF19EAEFE2
+:1096B000D4F2953DB64AD2F38F2856EE8F0DF1774E
+:1096C00056C6CAB7D03DC6F3FD9DEF16FE03FC9DFE
+:1096D000930A64FE5DC610BF677CBEF261611F7EA7
+:1096E000B3CE1807437E9763F30918AF656733C994
+:1096F000AF33C816A0EF6B95D74E213DF06491EBC8
+:10970000535CA731B7FBAB97C653BE8103870AE50D
+:10971000CBA0671E2FFC27FA09FE597E3E5F01F79A
+:10972000735DECFD791FC23BAB8F7BF472E0912837
+:1097300078FF68BD9DBEAFB552D5A33B4DDD492D29
+:1097400050BFFFAE13BBD13FE16B3330BCDF76B10E
+:10975000FEA3860BE8C5E610FB68C339BDD8F7D673
+:10976000C420BDB86155FE8E6361C6D1F4E29B662C
+:10977000EBF5E2721BD78BCB6DDD26B40FCAE3BECF
+:109780007F1DF34E8DD5AC1DE5E220A586F4E17872
+:1097900089513EF1FF8FCBB37F685CBE78B63E2E19
+:1097A0003F56CD47411E8FDFFFE9D2FCA893B8DEBC
+:1097B000B0C6C8ED15AF02EFC2C4D143E3F243CF48
+:1097C0003E4371F975DBAD748F6FC38E663EDE1458
+:1097D00026619E792253F5B502EE2F0DD53F1E3539
+:1097E00029D694F188EF06BA4F88F704C92FB2DD65
+:1097F000BA09FD4DE9769ECF6DDEFFF256B73148CE
+:109800003F043D94F4E2B2007D97A95C7230E23BE4
+:109810007193FC141FAF1308BF46CCE6F4B330D7E6
+:1098200047FAE1A03249E0F7C4DCDC8E4FE671E78D
+:1098300048C42F682A8EE2715FE980E8C0B8F37DE2
+:10984000D87432DE5F65FC7B15930DF4EF50AC13DA
+:10985000BA13902FB70A4A223E4167A27B8F4FC7A7
+:109860002803F1DF93F22419E8DF93DA93D7988085
+:10987000EB6BAA6F4D40BD70CD6C1E4769CD3B4E62
+:10988000F90FA674D00753E819F6DF1D9DEB14D429
+:10989000BCC0F604FA1E026BF990F06A9499F17F4D
+:1098A000E7C7E15F84F474CC46FAC2AF041FBF2758
+:1098B00064B7D27DBC96CBCC8955B09E66BB99B4BB
+:1098C00009EF65530FA4C0FBE6015234C601BC2961
+:1098D000A912FA8FBC318D6FA21FA439259561BEE4
+:1098E0007F53D9048A9F379D0506033D3DA347EC6E
+:1098F000CF82F76B84007D37C83DD9C0309FB0ED73
+:10990000B2A989C1F7324529544E3A482E88B2810E
+:10991000EEF9896A3C5B3C2F9EAD8F4F7F3F9BEFFA
+:109920005B662DF3E81E689C59C2FD965F56FC21CC
+:10993000DD738B33535E50B989F1EF7E5CC6E85C12
+:1099400042E1E759A58F2B186DFAF5ADC1C034E59A
+:10995000619F5D82F8D18030A53CEEAF96205F6AB2
+:1099600038577F92D747F0F2CED94797A01C941969
+:10997000FFF7491A46F1BCCBF201C5C487CB4D8134
+:10998000B0DFF9BDD07A64E653D4F1D8FFE4786B48
+:109990002E33CFF3A55F78BC9E7301F5F912C6D5BF
+:1099A000DA858E1BDAEF7FAA7D6FFBFC68F6B9FBC8
+:1099B000719407412AA27A9F0DF564A3CA0F3DD97D
+:1099C000137C7E19F9819BD3458C419767FBDFA6F9
+:1099D000F2D6B800800000001F8B080000000000D5
+:1099E000000BCD3B0D545CD599DF9BF7E6CD10669F
+:1099F000E00D0CC910093E082831045F1288A04907
+:109A000079046240A94EF809B825E944A346DBB3BE
+:109A10009DBAD6923DD932094320989009A9256E66
+:109A20006D8BA9D9B5B547A9DBEDAA47BB9398F5CE
+:109A3000F81FDA5AAB7B3C16539BDDF6B83DF42792
+:109A4000969ED336FB7DDF7D0F6626432069F69C0C
+:109A50009D1C72E7BE77EF77EFFDFE7FEE9C3B87A4
+:109A60009F5A8073562B6B2A9865C09F73607DD672
+:109A7000E0736AF93FD0FD0B0114FAE6C047DD4DF3
+:109A8000F1A24AF1BC25404370BE1B4003889F935E
+:109A9000F0A9050F5FBD74AE182014C4877902AC1D
+:109AA000B67006EE4FBB56C7EFF4039C4538B9C6F7
+:109AB0000C1CDE47113040B0C763FF5A35FCEE9DE9
+:109AC000B4EE35601CD367C62BD6BA571F51216E32
+:109AD000CFC7BFCF5AEBFEB4AB353BE499396F6AC1
+:109AE000BB6C3479DE8774065C27E283D163F83D72
+:109AF000FA6E4CE24D3C837FB8DFE84A6D74109FEC
+:109B00003F688FF3E2B822315FC7FD66C0CC47598A
+:109B1000C878B05E428903E7EFBBBAE2519AFFF022
+:109B2000E3C3DFFA363E3EF29D3DBFA4764149C510
+:109B30005035C2CB341C86403B044A900E4EFA8608
+:109B400078F47CEAC814A21FFBC978DA5B7E678CC4
+:109B5000C99748471C7FC77EC9D4703D97C77354C7
+:109B6000A6FDB92593F62B1F5EC4FB0F6C4FA6FB19
+:109B70008864BE1DC0F19103121CC37E8691B00E95
+:109B8000FEA905C9E39B09BF55D44B18871B3F2885
+:109B900041E7581A7C3F1874303D886E9184FD1F50
+:109BA00072EAB7105E0FED932182200FED74012C45
+:109BB00006F846F0DFEFDE5D02F0853E27E37D64C8
+:109BC0009D3A2AE1FB11AFB6B993FA4B1CC6511D61
+:109BD0000463E2B90EAEB88ACF65AF3778ABCEEB8F
+:109BE000C5D6A9F9E0A1719381A097F9E88D2AE281
+:109BF000A3B765E6A3D4FDA7F2DD5C7C5618CCB113
+:109C0000F0300AC115C89EB279E20CEE0FAE763084
+:109C1000FF2CBFDAC1FB3B5B8003A4D9F9B0AF07CF
+:109C200017B87A866F548BEE7BFD2DA708FC6CF37A
+:109C3000D4D171B3A882D685F05839F27320797FD8
+:109C4000F6B8926979F83B5850C9723726E3595DE6
+:109C5000A371132AA81D37256CCB1EBD5FBB90BC1A
+:109C6000B820017E11C1053E7FAAFC3A21C448DC20
+:109C70009359781B9DBF6FA30AB29406DF73F40F4C
+:109C8000EDBCDB24FA473E0F4629EA096720992FED
+:109C9000832F9430FFC80332B8A444FE6A34895E2F
+:109CA0005FBAD539AD7FDCB61E23BA1B45E0C07D57
+:109CB0001D7E4B66BE391CDCFB0B99E4BB51D525E0
+:109CC000DC7F46ECEE87DAF1FDA1D765631087777C
+:109CD0003FB3EB67AF627BBABA788D544C44322302
+:109CE000DB71FCE9F56E63D010F2378D97626E4C34
+:109CF000F79A99F50E5517F37A515C4FBA001F2861
+:109D00008DEA0744875478D3FABAFBF858C3EA04BB
+:109D1000B95A187A2188E71BF2E0263CF4FE24BFEA
+:109D2000874AE4CBFCD9D7418C325E7E465F71DC3A
+:109D30005F5ACD9304A7A9B42A9249E7826C207C8C
+:109D40007CE8356EF4E190F79D86DB289F99DF1B58
+:109D50007342BC9CF080EB62DB0C135B5A88EF4BC8
+:109D60009CAC3F64FF4A7EBEDD1B541CB8AFFF0CA9
+:109D700016F37AF6FC26F8B2721FBEBFD639DA4067
+:109D8000FC11DD0E5A04A76CF3C614EA6FA00DE2B5
+:109D9000C21BF53A7711C26D7C9E1602A8F50DFB29
+:109DA000C90E553C77A42044EB47CC1F95219E7DDE
+:109DB0000255B0DC351EACC7F9BD6FC8C61E7EA209
+:109DC0001D0FE17C252003D1497A6A6D6002F7A35B
+:109DD00078CEBC075900EB26011A12F8A976CA0DF5
+:109DE0000D097AAE0E2127F6EBDDF949E337684518
+:109DF00049EF65308D38D277636059D2386F55A5F9
+:109E000046FB6DD257263DBFB9AC26693E3428A724
+:109E100027B0BF16FF11DD65107D5BAE3CE5D84F66
+:109E200098AF40421FDFFF25E8F59FC9C4CE75708B
+:109E30001DC94F33189D241F68BC8D63889785CF3B
+:109E4000B92732C9909826DB75C9E2CFAA4D454C97
+:109E50001FC973C641F87F0461C8C81715DA848327
+:109E6000E804DA98C4CF516F0C22B2038AC9E3D058
+:109E7000C069511C77056A6F0DFBDE00C4A8BF04E2
+:109E8000623C1E3FB1C335C8166E313FAB058C83B3
+:109E9000F83EB33C2249D8CF69044346781E635C40
+:109EA000A27D6A385F5E492C19E77E41238CF73228
+:109EB0007C730FCDCFEF06AD2F9FF997DF8F7641E3
+:109EC00084F6F32818E092091FA890969216097359
+:109ED0007B25E839A487BE09C62AEA97C204EB2588
+:109EE00034EF12F517C19826947D9CF5374C28BEA7
+:109EF000336EA1FFD3C9CD8CFC2870C6A60B0EBE55
+:109F0000FF56B37C13EAC1CDB7555DD0DF50BA5FC1
+:109F10004C92DFBB37E98C77A57B23CB8BD2FD122C
+:109F2000BF1FD814BC6E133E2755E05E75F1F8AF25
+:109F300050053EA31218E8CB40F4D99B02DBC85F62
+:109F400079D66D94B2C8233E892FAADD93AFD48809
+:109F5000F9440F3FD283F09D530E12E16009D10105
+:109F60009FAB48877D4CC718C32D0C83B1DB5A9734
+:109F7000FAF94807A2CB28680B08AF72F8E2E8C0EC
+:109F80001F84B3E81937FB470AD165E965A1CBA760
+:109F9000098F174B97547AC0AE5C809AB9F5E95790
+:109FA000A57886B494C882F4C1F348481FC26700FC
+:109FB000043DD0AE1B84A774F8A77E4625E87BB885
+:109FC0002FC6133D233533FC9F8DFC2FFA42BE7CF8
+:109FD0004807D11774F293BC603F101CE3F939DBDA
+:109FE0002178209FE86132F26CBBEC8249F66B8BE2
+:109FF0002583E9B55446070DFB9952DC727E46D99C
+:10A00000AE6781C6F4590C616EFDCEC9E3E7485FC7
+:10A010007B1CA391226A9FAEA3757A9B51C390CA01
+:10A02000F70ED7315FDE035A29F25DA16AB2FE2E28
+:10A03000BC4631227A22BEF608BF49378F90BD292F
+:10A04000747861B07266DDA8D308C4905EA7BC675F
+:10A050004E84F0F9827CB4EFC60C9E4F3BC5F908E4
+:10A06000A67C05C983908F4035EEC577BE7E0B2850
+:10A07000826F3D3B107F888FADF402F1240DFC1BF5
+:10A080003F7FA45EE8BBCF6E0A3D4EFC42FA89F1E9
+:10A09000678246FA493380F5A6438FB09F7076C039
+:10A0A000A5139F426CC424BF629BB5CEB601D707EF
+:10A0B0005256C239A3AE243BEED083D9CCCF86040E
+:10A0C000E41FCC77DEA5F23F74E7CDCB0FA87B6A07
+:10A0D0006DF644F9ECE354928FDCC479824EAA3FCA
+:10A0E000C47E874A72923B371C678AFF62C371063F
+:10A0F000820CC769FB2F64B7909E77A1DD1A447C60
+:10A100007FDA448788F972F23FC89EDF1ECE62BFB5
+:10A110008B5184E3EE8849A383C88F774258253E4C
+:10A1200095A02442F4DB1A91D87F2BDEB73D8BFD3E
+:10A130000568D0083F52FC06F9DCF28BC0A385A766
+:10A14000ADF15F3A752FE1D50B3F4F88B7ECF7BF04
+:10A15000EB5A7AAA4A27A5ED2923FA665AF445B59F
+:10A160001D790DF7E9FC53360C6AE4177FE98D5A27
+:10A17000DC5FDF8F6583E2B34C10F1D50210763CD3
+:10A1800093E47429F1CB58FC33C46FDDD91A9DD701
+:10A190001E07D6B80884D83FCE443D40701D99FBB9
+:10A1A000993F33B354DDF6B721F11C6E89FD608F02
+:10A1B000A572F3D4789CE42B0FFDD8DDC9F02511EE
+:10A1C000CF03C7437C0EE9FCF55758FE3ABEAA3BC5
+:10A1D000370FFF3ED57F87C47890C663DC194FC028
+:10A1E000EBB4BC587266EFDBE35193E525659E4DF9
+:10A1F0008F72A7E08FC5187FEDC6FD0E0C1CAD2336
+:10A200007D3392073A469AD0BFF59F248AB3D693FE
+:10A210002E26FBD300A3144778401F2CC3BEB3C027
+:10A22000C3FCB3E8BF83F1CF209CBBAB5D9A8E38F3
+:10A2300059FC91A9D5E1FBBB0ADC8689F48D5AE370
+:10A24000230DE86789E5DF26BFF44E6BBF4C0B9406
+:10A2500043B3A588F95DF1B5ED7D8DE2DEC532C869
+:10A26000A4D7E42E83ECD39D1830E4A2EB0E5F76E6
+:10A27000B2DF87FE1D9FC7D590ECF7DDF58833A9C7
+:10A28000EF4CF1136B5B92FDC0A616E075693FB908
+:10A29000ABFE7AF8E0F1B3FE5CA18C3BB43476D52A
+:10A2A000C6BFF49487F1FF421EE295F32441F37395
+:10A2B000D877211E895F11235955882793BEEAE478
+:10A2C000277FEF3E1AEF3A8BFC4BE3654FC3E788DD
+:10A2D0000E57587802B12F13FFD1BE53FD61578A34
+:10A2E0003F9CBA6F9B0E77D8F859036B083FE89FE5
+:10A2F000B37F609F2BF53CCF637CDE80BCF4831E74
+:10A3000037B7F11E8DDB133D016E4FF6E8D0808E1E
+:10A31000D54B3D65DCBEDC63F0F3577BAAB9B5F1E4
+:10A32000319BBEF1E639D85F38B4CBC17902A55C68
+:10A330007BE56AE2DBB764561F1AE819CA52B643D6
+:10A34000A0E0B82B1B955193CE62C53F8B2C3E5B92
+:10A35000EE9A3CEEC279B17C30F6D044B4DBDB2B14
+:10A3600067E29F75938E1939018A771624E50BEA07
+:10A370002037A95FEFBE2269FC066D69D27B9BBEC8
+:10A38000DFA81372B331B03C69FCA186F5F1BBC9FB
+:10A39000AFAF7169946F68D25727BDBFB9EC8624FF
+:10A3A0007820371BA4A773BA12E8C6E74FA6ABBA4A
+:10A3B000E3C271904DE7D11439988DBEA97C6BE34F
+:10A3C00035671AAF22AE8C525CA9D3B9CBA56D0804
+:10A3D0006A68DA2F3181F24BF6BA4A35C69715977B
+:10A3E0003FBECCA2F8B2285D7CF921E76DE68C2F48
+:10A3F0001B93E3CBAC14BCCD155FBE7A89F8DC5A55
+:10A4000028F26E39AFCBEC07CA8D61B67FB9E3B2E3
+:10A41000B191424FCB1FF392CCE3B8AD552AFB97D5
+:10A420008760220022AF984FF630B7DCC8277DF353
+:10A43000A4CF5C781BC5F94D0EE3284E79B1EE2B05
+:10A4400001F23BF6ED7E34804609FEA7C5C1FA2E27
+:10A450005677660BC995A2A31F27716B8EA6F14F85
+:10A46000ECF176BEF1E016916F3C68E51B0F5AEBFC
+:10A470002042D8DE8E54897CE3AF5B742BFF17E15A
+:10A48000FCE2E12D6BAC7C23F657D07083EDF8A095
+:10A49000D730EF20FEF9850722F8E880A4654964EB
+:10A4A0002FB63834CA1F8F34AE7A97F249FB3CAAD4
+:10A4B00041021FF5ADC927FE92B7A2DB83FDE1C6BD
+:10A4C000E19769BE52EAE07E74CB559C171CC9D354
+:10A4D0009A8A29CEDB504C9806F9993FF5505E23B5
+:10A4E000EA3B13A0F9BDD78BF9B3D12735FF2F93E2
+:10A4F00026A6F8ADC41157118EFCFC993F13BCF38E
+:10A50000F2F3297EC5A04FE5BC6DFE8FF77E2B527E
+:10A5100042AADCE47CF308CA3CE169EB96966C8ABB
+:10A52000A7B63A27F2D2D90B3BFF39ED6FFA93FD6C
+:10A530008454F8FCB1F36B0ED1D5EDBC2D7EA2B7DF
+:10A54000DC381A27BC41ACB198E25E8FB0CBB3E1E6
+:10A5500041F15CB80E22776798190978B0EB1DD7E6
+:10A56000B68A3CB8D1AADB79C6A47A89D2E8E07968
+:10A57000B67EB0F3E3A975127B1F35AD224F7BFD8C
+:10A580000CBCA4BA89BC56B5E0191C17A7E6B3E702
+:10A59000AAA3CC95CF6EB6CE73B175937B5B81E7E2
+:10A5A000FD7FCD7FDFDBFA7F93FF3EBF5E34CAF2D3
+:10A5B00003CF4CFE9CE43BBA6CA13E28EA4349F52C
+:10A5C0009CD43ACE60868033BC52F8A9C3563FB2C1
+:10A5D00042C04DADEF6458799548EB521187812107
+:10A5E00088AC9885C4171EE5BB110DF96181E71091
+:10A5F000F8B075F9B745A8AD2DD487AA715FC3CB64
+:10A600001C6CC786BDA147FB480F2DF3A4958F8313
+:10A61000AD422F0E10DF72FC04A683E44EB2850417
+:10A62000420EA4D708733EC0D1569FC86769B1EAED
+:10A63000DB118F5F25BEC8E3F3F0FC54F85F3B1FCE
+:10A64000FE63C4AF510B38C1D98670BED93A5D479D
+:10A650008CD07BB7B59E5B8F5593BFF058AB26F47B
+:10A66000B0B2D2A0F30FFBD2AFF798B59EE9084B7A
+:10A67000346E5197980F6E31EFA034D9795AD09338
+:10A68000E589D6A7F79946B27E48859B5176E17A4F
+:10A69000D9D3D3FB4F8E870E48E9F7F9634B0E6B86
+:10A6A0000B81ED11F1C59E347C912AEF2AE53F1113
+:10A6B000EE098B0EB6DEF128E3EB332BC9BE83D156
+:10A6C000CB883DCEE7DD93790BC7C97D378B3C87BF
+:10A6D000AA08BD5DD089606AA8BED210E1BAE1FDCA
+:10A6E000A0B97CE7E3E162E33DB2379184F93FB181
+:10A6F000F823B52E18A3BA20F9B15417A4FE4E576B
+:10A70000673ABBFD6E8BD3B2BFE9EB3B47A8BE8374
+:10A71000F38F545BF59DA0A8EFD43DF508ECC4F78A
+:10A72000BF331DECB74ED7771A8AD7480E9623A0B1
+:10A73000FAF47CEB3BB18679D67782175DDFF9635B
+:10A740002BE2E79047D459A6EB3B6DFE79E5757493
+:10A7500088C5BB49AF7401E3C1DB340C3B299F10B2
+:10A760001071C6892A97E0AF9D92159F4103D87A50
+:10A770000A3FCD5DFAC3B9645FDE714129BE5FFF58
+:10A78000C4EB0AF587F31D6B287EBE569D78F05A00
+:10A790007ABFC6C9FAA30E29194FE28FB8CBC145BB
+:10A7A000F0886AB5B268E312B5F5EECC247DBD4100
+:10A7B0004B8E3F86A64EC8D9C49F1A1812E279A8BC
+:10A7C000CE30B349F71813BDF47C68836E0CEAE40D
+:10A7D0000F27C729434DAAD0A745C2EE0C1FD71F8C
+:10A7E00026FFAABF3B83FDCF03050E71EE1218258D
+:10A7F0007E68D293E39AE1B1E27D2524673127E7B1
+:10A80000CBBF3326C66FDFBD7294E252CDF257B78D
+:10A81000E7AF673F14FAC4B89BCB96A79C7F5C2335
+:10A82000BE88ED7402E1BFBFE0F601CA877E1075F5
+:10A83000AE2671196AD3997F6DBA6DEBBB93EB4469
+:10A840007D2A70DD74688BCAFC3F94F7C1913B4848
+:10A850004FE72D603C8F6C51F34309F270A2CDC5D8
+:10A86000F41ED922FC8B3C0784C6D2BC3FD126F40F
+:10A87000D027EF013E4F16DA651D1FE94A38EE2258
+:10A880007C1400FC231D27F0E1437CFE460794E284
+:10A890001687FD5DECBFA5F2D9785B69525CEBAA27
+:10A8A0007624E1D1E90A8639CF7D33E8A4AF1A1ABC
+:10A8B000B14FF17D970AC46FAEC0FD7CCE1CEC6732
+:10A8C00060DFDD188B28D87797845693DFFAE2CEC5
+:10A8D0008E01CAB3B8FC0E8DF8CDD57557B095C6AC
+:10A8E000573A2103DFF7812E05689F1109485FEB76
+:10A8F000106A247F7D38E0D0286FD31C6DDF41EBD8
+:10A9000037FB1700D1796B9383D73B6BAA9CB4CAF2
+:10A91000234783F25F0B3D6C77DF77861FEEC0F134
+:10A92000EF23BD223073AE5D6DC54CA70C3D397E63
+:10A9300076438CEDF05A73BC8BD6595BAD52450310
+:10A940004ED49C3942FEFA4895CB70E1BE466A244B
+:10A95000C6F7C755CE51BAE7F003755CA6757FF010
+:10A9600031F246513AF9BDB0DCA48E1FAA6E7113C4
+:10A970003FEC458A107E22530EB65FA9E3FE6CD1F0
+:10A980007F2FE285F01CC1FD96525C34897285D020
+:10A990007D53C1C7EFC076559BC2E3BE90EF885090
+:10A9A0005DA8BF496539E9F78606E8FE4F3FF23BEF
+:10A9B000C743FE10F3F370BE9FE5D05E67B86673C1
+:10A9C00019F1CB1B5519ECB757B535DE4B7EFB7A29
+:10A9D000F9A37F798AE2A70295E9D9EF0CC65F2532
+:10A9E000BE6E12FEE2C9250FB0DCF575DD0E8437B0
+:10A9F0008884DFA1BA555F650DC3B7F30DC34B441F
+:10AA00003EA9CF7F5F84F21BF16A915F30F38E72B3
+:10AA10003ECFCE2BD5597A6CB92BFC4A29CDBB47FA
+:10AA2000117561B9204AFAC04579259AA724E7BB78
+:10AA3000D64D26C7C18B53E2E0D43C13B8C74B5A5E
+:10AA4000D19E3ED986F1F17298CE2BD111588E2B22
+:10AA50005D1C2F8E548B3828E60CE76BE5E7CBF1B5
+:10AA60009B961F3CDEE3460E00F8518FC6FD2CF38B
+:10AA700037BB7311D45B3D017E7EEBDA47A5C47909
+:10AA80004395ED6E9DF5C64480E0A6EA8B543E5892
+:10AA9000DBB6C0B20F26107D872681F1EBAD5915CC
+:10AAA000273E3DFB7BE038F4130DE31E283E7F7EFE
+:10AAB0009CF6E9A2FC97D8E749DAA78BF25F627FA0
+:10AAC0002FF7E8DCBEDA53C6ED827610797E5B1F85
+:10AAD0005C89FA00F1D65020FA24FF648773FCB732
+:10AAE0000789BF5C014523F97617C4E252823E18FC
+:10AAF000F186DF25BBDC9FE761FE4BDDD7AFDA1CBB
+:10AB0000D6B9C2B711DC21844B787F71E77F3DB4A1
+:10AB100094D6794B66BECAE9DABC83F50EEA850C99
+:10AB2000F637843E8CE57938EF30B2B354A2FB504F
+:10AB30005B770B47774EB9C7754671DE09D4D7D41A
+:10AB4000EF4739A7F3F4D77CF0195AE7E33F2EE03B
+:10AB5000FB4D235BDE66B97F030390DCCB28F7B6A1
+:10AB60009CC5DE5AFC6D117F073B9E11E7673D389F
+:10AB7000E21D8FD1F9FB7F22433ABC5D2A5DC19C67
+:10AB80009F1F32AA4C1E3FE74F53373445DDB07745
+:10AB9000EC7BDC8F34039462FFEB4ED34D7CF0F5FD
+:10ABA000DD8E0BD60DBFBEFBC275C3D12F3BC0A53A
+:10ABB000CDECE30A98E03C2B85F05407ECA357D882
+:10ABC00066B787AE6E673F52D415F51ACA39505F23
+:10ABD0005B40FEF3C026B38CDFFB73D8EE0794B165
+:10ABE00038D9F500D5CB75BABF10E1BA27E567E9CA
+:10ABF000FE42EAF97B9D13EBF97C3884EA95A9F5CE
+:10AC000049C9F37D51DF5F2AEA90767DB2429D38D3
+:10AC1000FA20E1E93637E3A1F7D9EBDFA1FA975D36
+:10AC2000C70F5875606D0768BBC539CC76F2FB9FBE
+:10AC300017F550B81ECFB192169928DEB482EB9B5F
+:10AC40001BE81C73ED7FBE75C3664BBF2173F33DDC
+:10AC5000C89F59F8B4C7FD4DBB90C76B5591B786D7
+:10AC60002C95F5FCFA273C2093BFEC558F929C6CF9
+:10AC700083890D244FBD3EE1B7450F39D96FFB5491
+:10AC8000BBCE74CD534DBEBF90F7F719C66E0413FB
+:10AC90003DAE65511EE92FADE6A7DA791FB1B616B4
+:10ACA000DAC780CCFAEEFDD20D7C8FA949CA66794D
+:10ACB0005434B330515FEE6A4F7F1FA9B670B2852E
+:10ACC000D7F73A80E2AD6886F1B24EF87E4161B8BE
+:10ACD0004D20EE2BC1764D1AC073F67A4E337D6A45
+:10ACE0004B5D2B493FED6A17715BD49B3EAE7BA059
+:10ACF0005DC49F852DA12F101D6E82C97AD26F2849
+:10AD0000DA4684EFB588786D17E94B11EFEE72AC37
+:10AD100099C96BBDE40CEDA2F39ADF11FE842B20E0
+:10AD2000FC7A8CD4381F74ACC5FC0782DB4C7C5E8B
+:10AD3000C98A0A8EAD3C7F1F519B2EED662FC13B09
+:10AD40006CE9E70ACDE4BA6B05388C5E7F425D5D45
+:10AD50009F5F5D5DD2BE2FEAE937083E86E723821A
+:10AD60000FD78346F284FC7798D6B3EF97543CB75D
+:10AD7000A388EB2E9758DF3ED5627E95E0BDB829BB
+:10AD8000F8353AF7FB3B3B80E1CDF3BE466D6138C9
+:10AD900010443AF56708BFF9C93AA3339890FF7990
+:10ADA000D3A2D79B165D97233B8D8B7B6F6CC7AF70
+:10ADB000826A37D12B157E5F0F8C511D68B6F5D591
+:10ADC0007DF7B9294FDC5BB0DE4DF7D1A29EF5D9F6
+:10ADD000D4EF2F3003B47E5F4FE3B31F96121F09E9
+:10ADE000BE8F2C11F98818EAE748429EF4C576997F
+:10ADF000F7555F0071CAA7BB3CC22F7261BCA8AFF8
+:10AE000020BFB99AED393E1FA3D4C16B963CC9A6A9
+:10AE10000126DD172C0089F0853A727A3E99BCFA3A
+:10AE20008230D0BE66832337E07C8A470B34F643FA
+:10AE30007EDDAE313E7DA663268E87F9E3EBD01C26
+:10AE4000F8CA99035FD37C6DC95D2A9ECE109E8897
+:10AE50004F7C0FF0B9E04FF52C672E547854CFFF9C
+:10AE6000C8C68BC7849097C37F89F013A50B36E5BE
+:10AE700033F8455F91F12B6B619EE72A3020B48255
+:10AE8000F0A149848FD4F3573CF77803E1ED956D39
+:10AE900042AFD62A96FE08E359903F6FB2D605CB53
+:10AEA0002E356508BBD30C3FF488BCB6E0D30A74DA
+:10AEB000C7DD39E7EB57BB7D72967BD74F6ECE105F
+:10AEC000FE903EC6FABDB751C0F77A851F7A74600E
+:10AED00015FB0F37E6972E48D48F97BB4E985A171D
+:10AEE0009CAB0E38C337A69BF6F93BEDBE085D95CB
+:10AEF0009B8D3F1E24FE7192DCB8B93DEF7D613021
+:10AF000060905C2D31238074DBEB0B07887FFA8E19
+:10AF1000EF7C87EA24CAEBB241FEA6A20481C6DD1B
+:10AF2000981766F9D8586002D5951EEC31BF9B087A
+:10AF3000F7969650F966A45BA63666121C0FC423DA
+:10AF4000648F6ECA35C3C13474A8DE2CF4C7B196C1
+:10AF5000E02A9A574BBA7315C0C39BCCD5D49FAF88
+:10AF6000BE3A5F9E1ADDA4F72F5D9E5ADC74BEFECA
+:10AF70008220DFD3EAFFA14C1ED6F4B87E4B9EFAA6
+:10AF8000973C00A104B90A6E4ED13B7E4BEFF84DC1
+:10AF9000968BCD9B752B0F1C64F970923C9527E81E
+:10AFA00019BFAD674C9647C56FCB93257F244F1EC5
+:10AFB000BA1F3C594F7E4A1F887B8CA9F2156E0937
+:10AFC0006DD94C762CEFB7AD45FACCFD4F5D17F23D
+:10AFD000D45F60F1FB92A799FFCF22FFD365E15EBA
+:10AFE0004F7112BFDBEDDA2919E2488A755312B7A7
+:10AFF0009F98CAE4B6762A835B732A97DBBA291F27
+:10B00000B7EBA7AEE0B67E2A9FDB8629E4FBD5C866
+:10B01000FF5345DCDE38B59CDB8D53CBB86D9C5AB5
+:10B02000CDE39AA656727BD3D40DDCDE3C5523D6F5
+:10B03000A19A504E5AFEA772D665E07F2342F5D101
+:10B04000BEE3F7BC43F8716A2AE751A2BE355CEF54
+:10B05000712A61E6FFA30542BF6FF408FAA4F2FF6C
+:10B06000B196D0FE74FC0F4E716F4BA17B5B95ECDB
+:10B07000E70C337F9FE7EFBEF447CA83A2FF7198C6
+:10B08000DF5FA2FD9FF62B1726FB95FD79C97E6534
+:10B09000DF12DBAF748D521D6CBBA4F33DB1532D99
+:10B0A000A17FE6F521B88DDE87DADC1AF95351DF8E
+:10B0B0008D010FF6B7EE9581F27DE85F7C8BF80C81
+:10B0C000503F90DD98AFBC3EBCC9D2EFD6F80A38ED
+:10B0D000ED085F847FF23E7DAD395FEE679B67CB05
+:10B0E000FD55509691CECEE638EB85DC6B42EEA353
+:10B0F00005C101CAB74453E4DEB6A3888724B93F2B
+:10B1000065CBBD25C7397E71EF2387E41EF9EA2799
+:10B110009BC579D1DF4EB2A38A35DED928EA5BF52B
+:10B120007EA1579546A12F142DD98E22DFBC4B74DA
+:10B130004995F78822FCE3A6D27F9DB667645773D2
+:10B14000FC3E291B97D67E3F11A13CD6716529CBC9
+:10B1500077AA1C45B555CCE7C7957A4827FFF396E3
+:10B16000239F6D474CB623A9E36C79EA3BDEC47894
+:10B17000B1EDCA713CB799604F366A020F684F3E15
+:10B1800026FE4A95A7DA4233144CB34FB543F8A5CF
+:10B19000AFAD0B0A7F11FD44F253A2CEF47E80DAEC
+:10B1A00021FC9F9C46EBF7153A8473510F3636C647
+:10B1B000EBA98681F2AC7620BC75E6442FC960AF5E
+:10B1C00067D84FFB47F97475FC15F2F9D126E117E2
+:10B1D00042772EFB2D763B17DFDBFE8ECDFFA9E3FA
+:10B1E0009E2C323BD3E1E5F3165E8E0E3C9DC41FD0
+:10B1F00043CAD29B0C3DAD5E358DCBA257E7E757D6
+:10B200001C473BC77A7576BFE2BA8E347C309B5FB1
+:10B21000F1890E91CF45BF621DCDAB2D177EC5E7DD
+:10B220003BE0F2FA0B35F731BE2ED55FD86CF1DF7B
+:10B230006CFE425787AD37C2AC375C96DEB8587F9C
+:10B24000218D7F703BF32F4CCA54FF43541B221FA8
+:10B2500022F408EA99BBE83DC6F1EC2F1CF5087E04
+:10B26000312D3D736D7B7007E175A85AF80B974B34
+:10B270000ED0EFBBAF236FFEF230DF71A58FAD1D97
+:10B2800098203F07BC31BA37DD4BF795287E7CCF3D
+:10B290002BEE11009451DEFF8BF23506D9B991CC1B
+:10B2A0002F7D83C6774714A07B83433D22FFF7C5DC
+:10B2B000055947017967C8197E6AC2CFBF770D1E4D
+:10B2C000C5F60F1985A39070EFF6B0256F2ED8C282
+:10B2D000F774B3B45B9EFD3037DDFEC4FD5CBABAD3
+:10B2E000728E7FD751A0F13D320B3F596A10227EFA
+:10B2F000922307D747D0DB83EA84BC475F4D5727AB
+:10B30000C7C1F922EF25837286F2EF03B49638178E
+:10B310009FB37FB1FB513A970E218677D0EFE0BC07
+:10B320007BFF5A11EFF47BC26E2D8DDED8D7937C54
+:10B33000FF28B595973D16A33BC287038A4169CF85
+:10B34000C1B2CA26CA4F4635AE0083EA7304D3D5CC
+:10B35000A7C72DF9D4C1607BAC7CB2253B9DBDB0A5
+:10B36000DB010BFF76DF5D326612DFA94566907F59
+:10B3700087E3F34B9184BCF11316FCBD9211AF45EA
+:10B3800064EDF50AFDEFD66326FDDEB82FEF2EAE95
+:10B3900033BAF5089CA1E72531F839E9A77C77E7AE
+:10B3A000689A7DBCD521E294BDCE10AFB7375FE17E
+:10B3B000FAE3DEA2F4F9ACE73B441E49F5AD0F72A7
+:10B3C0005EDFA7709D3875DC53169FF4AB6640E3D3
+:10B3D000B8FA81323A577409708E72EC9D379FD853
+:10B3E0008DFDFD3D41CE7B0C51FE0385B5BFF05E6A
+:10B3F000C6FBFE6B1C1A9D6383FC11DF47385C0D96
+:10B4000006E98FEC6A1C9710471E86D101BA0F77A8
+:10B41000782D70BED46B0493DEF723038E93FFA5C3
+:10B420004CB03E734237D7010EF855BEA73354795E
+:10B430009AFD231DC6394F315429E865D793FC1670
+:10B440003FFAFD773527CAC1018B6E0F52DE9CEFA4
+:10B45000318D41A2FF75A0709CEDF38175E39D5481
+:10B4600017CCF2BB0D0A45F6D70481E474A8CA9143
+:10B47000F67ED450D569DE67EA7E9C277EC9FA2F16
+:10B480004B99E0FC4456D96FD9AE3C64ED63E35A66
+:10B49000E0CD66570B3D9BDD1606FA7D58DE5BF26C
+:10B4A000A88EFDDD85BF8A38493E6E0358A4D37E41
+:10B4B0002778BF879B9F8EF3FEACFBBA203FCFF768
+:10B4C000712128E4D7BE77BDB04D4D8ADFB352EE6F
+:10B4D0004565A6F441EEBAE07DB2EEF7EE3975327D
+:10B4E00001DEA2CEE4FBD973CDFF43CF8E5327916B
+:10B4F0005F0E575E58BE0E59758D584F35D3C9E64D
+:10B50000339BEFB2E88839B3CF1FF28D75A6B3C372
+:10B510001D9D420E52F93195FF34D718DBF143EBF4
+:10B5200092E1DCD029E4F8060B4E4EA19E4FEFEDE0
+:10B530007B4C747FEAE934EB7EBA53E5F1337C6DE2
+:10B54000DBF9772ECDCE2F6B1176DEBF2A83EC3C54
+:10B55000E2F365BAC7F67B940F4890EB3E6FB29F5B
+:10B5600069DBF9C73B457CF062DE5512D9E91CCF97
+:10B5700004FBBF59D5C97980543BAD3A431C37AA67
+:10B58000F9AAAD6FB89EF55AC7FB4F4410CEFEF82E
+:10B590003EAE0F6522FF66484CA7483A3A4179F221
+:10B5A000BD9AF24E10BF63D3855EC85AAB70BD63BF
+:10B5B000C8F15EF587D82AB130042DB883CCB7FB2B
+:10B5C000C7F97E8EC5F773D1933E7F5A63FD2E85F2
+:10B5D000EA88F56F56A78B2BEC96EE4F25DF77BFE9
+:10B5E00038B9F8FB4EABBE9C0119422E9A1D7D6402
+:10B5F000EF9B1D7C2F85AEEF2A6BACD201D5F56990
+:10B6000067F8DE4FF77F24AB5EB474465EE0567198
+:10B61000AFE5EC0E714F867F47B8947EF739C1BF16
+:10B620000FBC926EB1CAEC07B3DC9C850207D583D0
+:10B6300023272469DA0FBA82AE341A0E9A570241D0
+:10B640006E53F77D1584F97919C4B8BD06C6B82DB7
+:10B6500087716E2B60925B9326E07E8D93A2AEB1D4
+:10B660000A0C999E574290DB3510E6B61A62DC7ED2
+:10B67000A5FE6F7F733B4EF9DA797811784D23DFA1
+:10B6800071043A7D7E1BCFAD9D3AF3C95CF4EEF3B5
+:10B690004DB01F5F5F3DCE7EA8D71364FE76FA05DE
+:10B6A0007FDB709CB3E4836D3F49253F69751AFECB
+:10B6B0009DC34F4AFD1DC9FF0229F7D0B3D04500F5
+:10B6C0000000000000000000000000180000000062
+:10B6D000000000000000004000000000000000002A
+:10B6E0000000002800000000000000000000001022
+:10B6F000000000000000000000000020000000002A
+:10B700000000000000000010000000000000000029
+:10B710000000000800000000000000000000000021
+:10B7200000000000000000000000003900000000E0
+:10B7300000000000000000380000000000000000D1
+:10B7400000000000000000000000000000000008F1
+:10B7500000000000000000000000000000000000E9
+:10B76000000000000000000C0000000000000000CD
+:10B770000000000E000000000000000000000004B7
+:10B7800000000000000000000000001800000000A1
+:10B79000000000000000001C00000000000000008D
+:10B7A0000000001C0000000000000000000000136A
+:10B7B00000000000000000000000003A000000004F
+:10B7C0000000000000000001000000000000000078
+:10B7D0000000000200000000000000000000000166
+:10B7E0000000000000000000000000100000000049
+:10B7F00000000000000000500000000000000000F9
+:10B800000000000000000000000000000000000335
+:10B810000000000000000000000000AB000000007D
+:10B820000000000000000008000000000000000010
+:10B830000000C00000100000000000080000C00868
+:10B8400000100000000000020000C0000010000016
+:10B850000000001000009FB0000000000000000881
+:10B860000000C08000100000000000040000C0883C
+:10B8700000100000000000020000C0800010000066
+:10B8800000000010000091200000000000000008EF
+:10B8900000009340000100040000000100009348F4
+:10B8A00000000000000000020000935000000000B3
+:10B8B0000000000800009354000000000000000297
+:10B8C00000009418000000000000000800009358D9
+:10B8D000000800000000000800009AB000400000CE
+:10B8E00000000040000093980008000000000008DD
+:10B8F000000093D800080000000000080000942019
+:10B9000000C8000000000098000095B000980000FA
+:10B9100000000028000095F00098000000000028BA
+:10B920000000C480054000300000054000009D205C
+:10B93000000800000000000100009D210008000038
+:10B9400000000001000020080010000000000010AE
+:10B9500000002000000000000000000800009CD84B
+:10B96000000800000000000200009D180000000018
+:10B9700000000001000000010000000000000000C5
+:10B9800000000009000000000000000000000002AC
+:10B9900000000000000000000000CF2000000000B8
+:10B9A000000000200000CF46000000000000000161
+:10B9B0000000600000200000000000200000730074
+:10B9C000000800000000000800009FA00000000028
+:10B9D0000000000100009FA800000000000000011E
+:10B9E00000009F60000000000000001000009F6346
+:10B9F000000000000000000100009F610000000046
+:10BA00000000000100009F6600000000000000012F
+:10BA100000009F67000000000000000000009F6819
+:10BA2000000000000000000400009F6C0000000007
+:10BA300000000004000000520000000000000000B0
+:10BA400000000003000000000000000000000003F0
+:10BA500000000000000000000000000500000000E1
+:10BA600000000000000000020000000000000000D4
+:10BA700000060000000000000000002000009F7091
+:10BA8000000000000000000100009F900000000086
+:10BA9000000000080000005300000000000000004B
+:10BAA00000009F98000000000000000200009F9C22
+:10BAB000000000000000000100009F9D0000000049
+:10BAC000000000010000000900000000000000006C
+:10BAD0000000000100000000000000000000004421
+:10BAE0000000000000000000000000010000000055
+:10BAF00000000000000000500000000000000000F6
+:10BB0000000000890000000000000000000012C8D2
+:10BB10000080000000000080000000010000000024
+:10BB2000000000000000A000071000000000071047
+:10BB300000001AC800000000000000080000AEC0AD
+:10BB400000080000000000080000AE4000080000EF
+:10BB5000000000080000AE8000080000000000089F
+:10BB6000000020080010000000000010000020006D
+:10BB700000000000000000080000A01007100040B6
+:10BB80000000004000001BF8000800000000000159
+:10BB900000001BF9000800000000000100001AD09E
+:10BBA000000000000000000100001AD800000000A2
+:10BBB0000000000200001ADA00000000000000028D
+:10BBC0008000000000000000000000000000AF0046
+:10BBD000000000000000002000001B78002800008A
+:10BBE000000000040000E000002000000000002031
+:10BBF0000000F300000800000000000800001AF038
+:10BC0000000000000000010800001B3700000000D9
+:10BC10000000000100001B0F0000000000000001F8
+:10BC200000001B70000000000000000400001B74F6
+:10BC300000000000000000040000005000000000B0
+:10BC400000000000000000030000000000000000F1
+:10BC500000000005000000000000000000000006D9
+:10BC600000000000000000000000000700000000CD
+:10BC70000000000000001BC80000000000000001E0
+:10BC800000001BE800000000000000080000005158
+:10BC9000000000000000000000001BD000000000B9
+:10BCA0000000000400001BD400000000000000049D
+:10BCB00000001BD8000000000000000400001BDC96
+:10BCC00000000000000000080000B00000180000A4
+:10BCD000000000180000C00000400000000000400C
+:10BCE0000000C00000400002000000010000C00190
+:10BCF00000400002000000000000E2000020000000
+:10BD0000000000200000E204000200080020000201
+:10BD10008000000000000000000000000000E200C1
+:10BD200000080020000000040000F40000280000CB
+:10BD3000000000280000F540001000000000001086
+:10BD40000000F5C000200000000000200000F5C049
+:10BD500000020020000000020000F30000200000AC
+:10BD6000000000200000200800100000000000106B
+:10BD70000000200000000000000000080000110882
+:10BD80000008000000000008000011680008000022
+:10BD900000000008000011A80008000000000008D2
+:10BDA00000001240000800000000000100001241E5
+:10BDB0000008000000000001000040000020000416
+:10BDC00000000010000059000030001800000010B2
+:10BDD0000000590800300018000000020000570061
+:10BDE00000080000000000010000570100080000EA
+:10BDF00000000001000011E8000000000000000148
+:10BE0000000011F00000000000000001000011F827
+:10BE100000000000000000100000124400080000B4
+:10BE2000000000040000400000200000000000208E
+:10BE30000000530000100000000000100000153842
+:10BE400000000000000000010000000300000000EE
+:10BE500000000000000000000000000000000000E2
+:10BE600000000001000000000000000000000004CD
+:10BE700000000000000000000000150800000000A5
+:10BE8000000000010000152800000000000000086C
+:10BE900000000050000000000000000000008308C7
+:10BEA0000080000000000080000000010000000091
+:10BEB000000000000000200800100000000000103A
+:10BEC00000002000000000000000000800008410B6
+:10BED0000008000000000008000084700008000056
+:10BEE0000000000800060000046000280000046054
+:10BEF00000008520000800000000000100008521EE
+:10BF000000080000000000018000000000000000A8
+:10BF10000000000000008408000000000000000194
+:10BF2000000084F40008000000000002000084F615
+:10BF3000000800000000000200008504001000005E
+:10BF400000000004000087600000000000000020E6
+:10BF500000006000002000000000002000007300CE
+:10BF600000080000000000080000000300000000BE
+:10BF700000000000000000050000000000000000BC
+:10BF800000000006000000000000000000000007A4
+:10BF90000000000000000000000088080000000011
+:10BFA00000000001000088280000000000000008D8
+:10BFB0000000005000000000000000000000881099
+:10BFC00000000000000000040000881400000000D1
+:10BFD00000000004000088180000000000000004B9
+:10BFE0000000881C00000000000000080000300075
+:10BFF0000040000000000008000030080040000081
+:10C00000000000280000339001C00010000000086C
+:10C010000000320000200000000000200000372057
+:10C02000000000000000000800001020062000387A
+:10C03000000000080000A000000000000000200038
+:10C0400000003EA9000000000000000100003EC802
+:10C05000000000000000000280000000000000005E
+:10C060000000000000006000002000000000000848
+:10C070000000400000080000000000010000400136
+:10C08000000800000000000100004040000800041B
+:10C0900000000002000040600008000400000004EE
+:10C0A0000000400000080000000000040000400400
+:10C0B00000080000000000040000404000000000F4
+:10C0C00000000008000040480000000000000008D8
+:10C0D0000000800000000000000000100000504040
+:10C0E00000010004000000010000500000000000FA
+:10C0F00000000020000050080010000000000004B4
+:10C100000000500C0010000000000001000052C7A9
+:10C110000000000000000001000052C60000000006
+:10C120000000000100003000003000180000000492
+:10C130000000300400300018000000040000300847
+:10C1400000300018000000020000300A0030001823
+:10C15000000000020000300C003000180000000158
+:10C160000000300D00300018000000010000300E0B
+:10C1700000300018000000010000301000300018EE
+:10C18000000000040000301400300018000000041B
+:10C19000000050000100008000080004000050046E
+:10C1A00001000080000800040000000A00000000F8
+:10C1B0000000000000005068010000800000000145
+:10C1C0000000506901000080000000010000506C78
+:10C1D00001000080000000020000506E010000809D
+:10C1E0000000000200005070010000800000000408
+:10C1F0000000507401000080000000040000506640
+:10C200000100008000000002000050640100008076
+:10C2100000000001000050600100008000000002EA
+:10C220000000506201000080000000020000505039
+:10C230000100008000000004000050540100008054
+:10C2400000000004000050580100008000000004BD
+:10C250000000505C01000080000000040000507CE1
+:10C2600001000080000000010000507D01000080FE
+:10C270000000000100004018001000000000000451
+:10C2800000004090001000000000000400004098F2
+:10C290000010000000000004000041100000000039
+:10C2A0000000000200004112000000000000000237
+:10C2B00000004114000000000000000200004116D0
+:10C2C00000000000000000020000604000080000C4
+:10C2D00000000002000060420008000000000002B0
+:10C2E00000006044000800000000000400006080BE
+:10C2F0000008000000000008000060C000400008C6
+:10C3000000000008000060000008000000000002BB
+:10C31000000060020008000000000001000060044E
+:10C320000008000000000002000063400008000058
+:10C330000000000800006380000800000000000406
+:10C34000000063840008000000000001000063C0DA
+:10C350000008000000000002000063C400080000A4
+:10C36000000000020000640000080000000000045B
+:10C3700000007000001000000000000400007004C5
+:10C380000010000000000004000070080010000011
+:10C3900000000004000090000008000000000002FF
+:10C3A000000090020008000000000001000090045E
+:10C3B000000800000000000200009040000800009B
+:10C3C000000000020000904400080000000000028D
+:10C3D000000090460008000000000002000096489F
+:10C3E0000008000000000008000090800008000025
+:10C3F000000000020000908400080000000000021D
+:10C40000000096880008000000000008000080403E
+:10C41000000800000000000100008041000800004A
+:10C420000000000100008042000800000000000140
+:10C4300000008043000800000000000100008000B0
+:10C440000008000000000002000080020008000058
+:10C45000000000010000800400080000000000024D
+:10C46000000080C00008000000000002000080C240
+:10C470000008000000000002000080C40008000066
+:10C4800000000002000080800008000000000001A1
+:10C490000000808100080000000000010000808290
+:10C4A0000008000000000001000080830008000078
+:10C4B000000000010000808400080000000000016E
+:10C4C0000000808500080000000000010000808658
+:10C4D00000080000000000010000600000080000EB
+:10C4E00000000002000060020008000000000001DF
+:10C4F000000060040008000000000002000060422C
+:10C5000000C00018000000020000604000C00018D9
+:10C51000000000020000604C00C00018000000088D
+:10C520000000604400C000180000000800006057D0
+:10C5300000C00018000000010000605400C0001896
+:10C54000000000020000605600C00018000000015A
+:10C55000000066400008000000000008000066803F
+:10C560000008000000000008000066C0000800008D
+:10C57000000000080000DA4200180000000000027D
+:10C580000000DE4000000000000000000000E000AD
+:10C5900000000000000000040000D0C00000000007
+:10C5A000000000040000D0C40000000000000004EF
+:10C5B0000000D0C800000000000000040000D0CC43
+:10C5C00000000000000000040000D0D000000000C7
+:10C5D000000000040000D0D40000000000000004AF
+:10C5E0000000D0D800000000000000040000D0C00F
+:10C5F00000000000000000200000DB000000000040
+:10C60000000000040000DB000000000000000068E3
+:10C610000000B94800000000000000000000D00049
+:10C6200000000000000000040000B0C00000000096
+:10C63000000000040000B0C400000000000000047E
+:10C640000000B0C800000000000000040000B0C0FE
+:10C6500000000000000000100000D6B00000000044
+:10C66000000000040000D6B4000000000000000438
+:10C670000000D6B800000000000000040000D6BC96
+:10C6800000000000000000040000D6B00000000020
+:10C69000000000100000D348000000000000000867
+:10C6A0000000D358000000000000008000000010CF
+:10C6B00000000000000000000000D358000000004F
+:10C6C0000000000800000000060209000000000051
+:00000001FF
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 5147bdd..257b00e 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1102,6 +1102,7 @@
if (!bdev->bd_part)
goto out_clear;
+ ret = 0;
if (disk->fops->open) {
ret = disk->fops->open(bdev, mode);
if (ret == -ERESTARTSYS) {
@@ -1118,9 +1119,18 @@
put_disk(disk);
goto restart;
}
- if (ret)
- goto out_clear;
}
+ /*
+ * If the device is invalidated, rescan partition
+ * if open succeeded or failed with -ENOMEDIUM.
+ * The latter is necessary to prevent ghost
+ * partitions on a removed medium.
+ */
+ if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
+ rescan_partitions(disk, bdev);
+ if (ret)
+ goto out_clear;
+
if (!bdev->bd_openers) {
bd_set_size(bdev,(loff_t)get_capacity(disk)<<9);
bdi = blk_get_backing_dev_info(bdev);
@@ -1128,8 +1138,6 @@
bdi = &default_backing_dev_info;
bdev_inode_switch_bdi(bdev->bd_inode, bdi);
}
- if (bdev->bd_invalidated)
- rescan_partitions(disk, bdev);
} else {
struct block_device *whole;
whole = bdget_disk(disk, 0);
@@ -1153,13 +1161,14 @@
}
} else {
if (bdev->bd_contains == bdev) {
- if (bdev->bd_disk->fops->open) {
+ ret = 0;
+ if (bdev->bd_disk->fops->open)
ret = bdev->bd_disk->fops->open(bdev, mode);
- if (ret)
- goto out_unlock_bdev;
- }
- if (bdev->bd_invalidated)
+ /* the same as first opener case, read comment there */
+ if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
rescan_partitions(bdev->bd_disk, bdev);
+ if (ret)
+ goto out_unlock_bdev;
}
/* only one opener holds refs to the module and disk */
module_put(disk->fops->owner);
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 5d505aa..44ea5b9 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -178,12 +178,13 @@
if (value) {
acl = posix_acl_from_xattr(value, size);
+ if (IS_ERR(acl))
+ return PTR_ERR(acl);
+
if (acl) {
ret = posix_acl_valid(acl);
if (ret)
goto out;
- } else if (IS_ERR(acl)) {
- return PTR_ERR(acl);
}
}
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index cd52f7f..9ee6bd5 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8856,23 +8856,38 @@
int btrfs_init_space_info(struct btrfs_fs_info *fs_info)
{
struct btrfs_space_info *space_info;
+ struct btrfs_super_block *disk_super;
+ u64 features;
+ u64 flags;
+ int mixed = 0;
int ret;
- ret = update_space_info(fs_info, BTRFS_BLOCK_GROUP_SYSTEM, 0, 0,
- &space_info);
- if (ret)
- return ret;
+ disk_super = &fs_info->super_copy;
+ if (!btrfs_super_root(disk_super))
+ return 1;
- ret = update_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA, 0, 0,
- &space_info);
- if (ret)
- return ret;
+ features = btrfs_super_incompat_flags(disk_super);
+ if (features & BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS)
+ mixed = 1;
- ret = update_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA, 0, 0,
- &space_info);
+ flags = BTRFS_BLOCK_GROUP_SYSTEM;
+ ret = update_space_info(fs_info, flags, 0, 0, &space_info);
if (ret)
- return ret;
+ goto out;
+ if (mixed) {
+ flags = BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA;
+ ret = update_space_info(fs_info, flags, 0, 0, &space_info);
+ } else {
+ flags = BTRFS_BLOCK_GROUP_METADATA;
+ ret = update_space_info(fs_info, flags, 0, 0, &space_info);
+ if (ret)
+ goto out;
+
+ flags = BTRFS_BLOCK_GROUP_DATA;
+ ret = update_space_info(fs_info, flags, 0, 0, &space_info);
+ }
+out:
return ret;
}
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index ba41da5..96fcfa5 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -10,6 +10,7 @@
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/pagevec.h>
+#include <linux/prefetch.h>
#include "extent_io.h"
#include "extent_map.h"
#include "compat.h"
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index ffb48d6c..2616f7e 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -81,6 +81,13 @@
iflags |= FS_NOATIME_FL;
if (flags & BTRFS_INODE_DIRSYNC)
iflags |= FS_DIRSYNC_FL;
+ if (flags & BTRFS_INODE_NODATACOW)
+ iflags |= FS_NOCOW_FL;
+
+ if ((flags & BTRFS_INODE_COMPRESS) && !(flags & BTRFS_INODE_NOCOMPRESS))
+ iflags |= FS_COMPR_FL;
+ else if (flags & BTRFS_INODE_NOCOMPRESS)
+ iflags |= FS_NOCOMP_FL;
return iflags;
}
@@ -144,16 +151,13 @@
if (flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | \
FS_NOATIME_FL | FS_NODUMP_FL | \
FS_SYNC_FL | FS_DIRSYNC_FL | \
- FS_NOCOMP_FL | FS_COMPR_FL | \
- FS_NOCOW_FL | FS_COW_FL))
+ FS_NOCOMP_FL | FS_COMPR_FL |
+ FS_NOCOW_FL))
return -EOPNOTSUPP;
if ((flags & FS_NOCOMP_FL) && (flags & FS_COMPR_FL))
return -EINVAL;
- if ((flags & FS_NOCOW_FL) && (flags & FS_COW_FL))
- return -EINVAL;
-
return 0;
}
@@ -218,6 +222,10 @@
ip->flags |= BTRFS_INODE_DIRSYNC;
else
ip->flags &= ~BTRFS_INODE_DIRSYNC;
+ if (flags & FS_NOCOW_FL)
+ ip->flags |= BTRFS_INODE_NODATACOW;
+ else
+ ip->flags &= ~BTRFS_INODE_NODATACOW;
/*
* The COMPRESS flag can only be changed by users, while the NOCOMPRESS
@@ -230,11 +238,9 @@
} else if (flags & FS_COMPR_FL) {
ip->flags |= BTRFS_INODE_COMPRESS;
ip->flags &= ~BTRFS_INODE_NOCOMPRESS;
+ } else {
+ ip->flags &= ~(BTRFS_INODE_COMPRESS | BTRFS_INODE_NOCOMPRESS);
}
- if (flags & FS_NOCOW_FL)
- ip->flags |= BTRFS_INODE_NODATACOW;
- else if (flags & FS_COW_FL)
- ip->flags &= ~BTRFS_INODE_NODATACOW;
trans = btrfs_join_transaction(root, 1);
BUG_ON(IS_ERR(trans));
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index e159c52..38b8ab5 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -775,6 +775,13 @@
ci->i_truncate_seq,
ci->i_truncate_size,
&inode->i_mtime, true, 1, 0);
+
+ if (!req) {
+ rc = -ENOMEM;
+ unlock_page(page);
+ break;
+ }
+
max_pages = req->r_num_pages;
alloc_page_vec(fsc, req);
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 5323c33..2a5404c 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -819,7 +819,7 @@
used |= CEPH_CAP_FILE_CACHE;
if (ci->i_wr_ref)
used |= CEPH_CAP_FILE_WR;
- if (ci->i_wrbuffer_ref)
+ if (ci->i_wb_ref || ci->i_wrbuffer_ref)
used |= CEPH_CAP_FILE_BUFFER;
return used;
}
@@ -1331,10 +1331,11 @@
}
/*
- * Mark caps dirty. If inode is newly dirty, add to the global dirty
- * list.
+ * Mark caps dirty. If inode is newly dirty, return the dirty flags.
+ * Caller is then responsible for calling __mark_inode_dirty with the
+ * returned flags value.
*/
-void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
+int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
{
struct ceph_mds_client *mdsc =
ceph_sb_to_client(ci->vfs_inode.i_sb)->mdsc;
@@ -1357,7 +1358,7 @@
list_add(&ci->i_dirty_item, &mdsc->cap_dirty);
spin_unlock(&mdsc->cap_dirty_lock);
if (ci->i_flushing_caps == 0) {
- igrab(inode);
+ ihold(inode);
dirty |= I_DIRTY_SYNC;
}
}
@@ -1365,9 +1366,8 @@
if (((was | ci->i_flushing_caps) & CEPH_CAP_FILE_BUFFER) &&
(mask & CEPH_CAP_FILE_BUFFER))
dirty |= I_DIRTY_DATASYNC;
- if (dirty)
- __mark_inode_dirty(inode, dirty);
__cap_delay_requeue(mdsc, ci);
+ return dirty;
}
/*
@@ -1990,11 +1990,11 @@
if (got & CEPH_CAP_FILE_WR)
ci->i_wr_ref++;
if (got & CEPH_CAP_FILE_BUFFER) {
- if (ci->i_wrbuffer_ref == 0)
- igrab(&ci->vfs_inode);
- ci->i_wrbuffer_ref++;
- dout("__take_cap_refs %p wrbuffer %d -> %d (?)\n",
- &ci->vfs_inode, ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref);
+ if (ci->i_wb_ref == 0)
+ ihold(&ci->vfs_inode);
+ ci->i_wb_ref++;
+ dout("__take_cap_refs %p wb %d -> %d (?)\n",
+ &ci->vfs_inode, ci->i_wb_ref-1, ci->i_wb_ref);
}
}
@@ -2169,12 +2169,12 @@
if (--ci->i_rdcache_ref == 0)
last++;
if (had & CEPH_CAP_FILE_BUFFER) {
- if (--ci->i_wrbuffer_ref == 0) {
+ if (--ci->i_wb_ref == 0) {
last++;
put++;
}
- dout("put_cap_refs %p wrbuffer %d -> %d (?)\n",
- inode, ci->i_wrbuffer_ref+1, ci->i_wrbuffer_ref);
+ dout("put_cap_refs %p wb %d -> %d (?)\n",
+ inode, ci->i_wb_ref+1, ci->i_wb_ref);
}
if (had & CEPH_CAP_FILE_WR)
if (--ci->i_wr_ref == 0) {
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 159b512..203252d 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -734,9 +734,12 @@
}
}
if (ret >= 0) {
+ int dirty;
spin_lock(&inode->i_lock);
- __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
+ dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
spin_unlock(&inode->i_lock);
+ if (dirty)
+ __mark_inode_dirty(inode, dirty);
}
out:
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index b54c97da..70b6a48 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -355,6 +355,7 @@
ci->i_rd_ref = 0;
ci->i_rdcache_ref = 0;
ci->i_wr_ref = 0;
+ ci->i_wb_ref = 0;
ci->i_wrbuffer_ref = 0;
ci->i_wrbuffer_ref_head = 0;
ci->i_shared_gen = 0;
@@ -1567,6 +1568,7 @@
int release = 0, dirtied = 0;
int mask = 0;
int err = 0;
+ int inode_dirty_flags = 0;
if (ceph_snap(inode) != CEPH_NOSNAP)
return -EROFS;
@@ -1725,13 +1727,16 @@
dout("setattr %p ATTR_FILE ... hrm!\n", inode);
if (dirtied) {
- __ceph_mark_dirty_caps(ci, dirtied);
+ inode_dirty_flags = __ceph_mark_dirty_caps(ci, dirtied);
inode->i_ctime = CURRENT_TIME;
}
release &= issued;
spin_unlock(&inode->i_lock);
+ if (inode_dirty_flags)
+ __mark_inode_dirty(inode, inode_dirty_flags);
+
if (mask) {
req->r_inode = igrab(inode);
req->r_inode_drop = release;
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index f60b07b..d0fae4c 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -3304,8 +3304,8 @@
{
struct ceph_mds_session *s = con->private;
+ dout("mdsc con_put %p (%d)\n", s, atomic_read(&s->s_ref) - 1);
ceph_put_mds_session(s);
- dout("mdsc con_put %p (%d)\n", s, atomic_read(&s->s_ref));
}
/*
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index e86ec11..24067d6 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -206,7 +206,7 @@
up_write(&mdsc->snap_rwsem);
} else {
spin_lock(&mdsc->snap_empty_lock);
- list_add(&mdsc->snap_empty, &realm->empty_item);
+ list_add(&realm->empty_item, &mdsc->snap_empty);
spin_unlock(&mdsc->snap_empty_lock);
}
}
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 619fe71..f5cabef 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -293,7 +293,7 @@
/* held references to caps */
int i_pin_ref;
- int i_rd_ref, i_rdcache_ref, i_wr_ref;
+ int i_rd_ref, i_rdcache_ref, i_wr_ref, i_wb_ref;
int i_wrbuffer_ref, i_wrbuffer_ref_head;
u32 i_shared_gen; /* increment each time we get FILE_SHARED */
u32 i_rdcache_gen; /* incremented each time we get FILE_CACHE. */
@@ -506,7 +506,7 @@
{
return ci->i_dirty_caps | ci->i_flushing_caps;
}
-extern void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
+extern int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
extern int ceph_caps_revoking(struct ceph_inode_info *ci, int mask);
extern int __ceph_caps_used(struct ceph_inode_info *ci);
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 8c9eba6..f2b6286 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -703,6 +703,7 @@
struct ceph_inode_xattr *xattr = NULL;
int issued;
int required_blob_size;
+ int dirty;
if (ceph_snap(inode) != CEPH_NOSNAP)
return -EROFS;
@@ -763,11 +764,12 @@
dout("setxattr %p issued %s\n", inode, ceph_cap_string(issued));
err = __set_xattr(ci, newname, name_len, newval,
val_len, 1, 1, 1, &xattr);
- __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+ dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
ci->i_xattrs.dirty = true;
inode->i_ctime = CURRENT_TIME;
spin_unlock(&inode->i_lock);
-
+ if (dirty)
+ __mark_inode_dirty(inode, dirty);
return err;
do_sync:
@@ -810,6 +812,7 @@
struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
int issued;
int err;
+ int dirty;
if (ceph_snap(inode) != CEPH_NOSNAP)
return -EROFS;
@@ -833,12 +836,13 @@
goto do_sync;
err = __remove_xattr_by_name(ceph_inode(inode), name);
- __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+ dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
ci->i_xattrs.dirty = true;
inode->i_ctime = CURRENT_TIME;
spin_unlock(&inode->i_lock);
-
+ if (dirty)
+ __mark_inode_dirty(inode, dirty);
return err;
do_sync:
spin_unlock(&inode->i_lock);
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 7cb0f7f..75c47cd8 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -7,6 +7,7 @@
select CRYPTO_MD5
select CRYPTO_HMAC
select CRYPTO_ARC4
+ select CRYPTO_DES
help
This is the client VFS module for the Common Internet File System
(CIFS) protocol which is the successor to the Server Message Block
@@ -152,16 +153,28 @@
Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
is handed over to the application/caller.
-config CIFS_EXPERIMENTAL
- bool "CIFS Experimental Features (EXPERIMENTAL)"
+config CIFS_SMB2
+ bool "SMB2 network file system support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && INET && BROKEN
+ select NLS
+ select KEYS
+ select FSCACHE
+ select DNS_RESOLVER
+
+ help
+ This enables experimental support for the SMB2 (Server Message Block
+ version 2) protocol. The SMB2 protocol is the successor to the
+ popular CIFS and SMB network file sharing protocols. SMB2 is the
+ native file sharing mechanism for recent versions of Windows
+ operating systems (since Vista). SMB2 enablement will eventually
+ allow users better performance, security and features, than would be
+ possible with cifs. Note that smb2 mount options also are simpler
+ (compared to cifs) due to protocol improvements.
+
+ Unless you are a developer or tester, say N.
+
+config CIFS_NFSD_EXPORT
+ bool "Allow nfsd to export CIFS file system (EXPERIMENTAL)"
depends on CIFS && EXPERIMENTAL
help
- Enables cifs features under testing. These features are
- experimental and currently include DFS support and directory
- change notification ie fcntl(F_DNOTIFY), as well as the upcall
- mechanism which will be used for Kerberos session negotiation
- and uid remapping. Some of these features also may depend on
- setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
- (which is disabled by default). See the file fs/cifs/README
- for more details. If unsure, say N.
-
+ Allows NFS server to export a CIFS mounted share (nfsd over cifs)
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index d875584..005d524 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_CIFS) += cifs.o
cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
- link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
+ link.o misc.o netmisc.o smbencrypt.o transport.o asn1.o \
cifs_unicode.o nterr.o xattr.o cifsencrypt.o \
readdir.o ioctl.o sess.o export.o
diff --git a/fs/cifs/README b/fs/cifs/README
index 74ab165f..4a3ca0e 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -704,18 +704,6 @@
echo 1 > /proc/fs/cifs/traceSMB
-Two other experimental features are under development. To test these
-requires enabling CONFIG_CIFS_EXPERIMENTAL
-
- cifsacl support needed to retrieve approximated mode bits based on
- the contents on the CIFS ACL.
-
- lease support: cifs will check the oplock state before calling into
- the vfs to see if we can grant a lease on a file.
-
- DNOTIFY fcntl: needed for support of directory change
- notification and perhaps later for file leases)
-
Per share (per client mount) statistics are available in /proc/fs/cifs/Stats
if the kernel was configured with cifs statistics enabled. The statistics
represent the number of successful (ie non-zero return code from the server)
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 30d01bc..18f4272 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -63,7 +63,7 @@
cERROR(1, "Cmd: %d Err: 0x%x Flags: 0x%x Flgs2: 0x%x Mid: %d Pid: %d",
smb->Command, smb->Status.CifsError,
smb->Flags, smb->Flags2, smb->Mid, smb->Pid);
- cERROR(1, "smb buf %p len %d", smb, smbCalcSize_LE(smb));
+ cERROR(1, "smb buf %p len %d", smb, smbCalcSize(smb));
}
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index ac51cd2..a9d5692 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -58,9 +58,7 @@
unsigned int mnt_cifs_flags;
int prepathlen;
char *prepath; /* relative path under the share to mount to */
-#ifdef CONFIG_CIFS_DFS_UPCALL
- char *mountdata; /* mount options received at mount time */
-#endif
+ char *mountdata; /* options received at mount time or via DFS refs */
struct backing_dev_info bdi;
struct delayed_work prune_tlinks;
};
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 23d43cd..1b2e180 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -277,6 +277,7 @@
for (i = 0, j = 0; i < srclen; j++) {
src_char = source[i];
+ charlen = 1;
switch (src_char) {
case 0:
put_unaligned(0, &target[j]);
@@ -316,16 +317,13 @@
dst_char = cpu_to_le16(0x003f);
charlen = 1;
}
- /*
- * character may take more than one byte in the source
- * string, but will take exactly two bytes in the
- * target string
- */
- i += charlen;
- continue;
}
+ /*
+ * character may take more than one byte in the source string,
+ * but will take exactly two bytes in the target string
+ */
+ i += charlen;
put_unaligned(dst_char, &target[j]);
- i++; /* move to next char in source string */
}
ctoUCS_out:
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 644dd882..6d02fd5 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -82,6 +82,9 @@
char *cifs_strndup_from_ucs(const char *src, const int maxlen,
const bool is_unicode,
const struct nls_table *codepage);
+extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
+ const struct nls_table *cp, int mapChars);
+
#endif
/*
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index beeebf1..f3c6fb9 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -23,24 +23,16 @@
#include <linux/fs.h>
#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
+#include <keys/user-type.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifsacl.h"
#include "cifsproto.h"
#include "cifs_debug.h"
-
-static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
- {{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
- {{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
- {{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"},
- {{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
- {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(544), 0, 0, 0} }, "root"},
- {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(545), 0, 0, 0} }, "users"},
- {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(546), 0, 0, 0} }, "guest"} }
-;
-
-
/* security id for everyone/world system group */
static const struct cifs_sid sid_everyone = {
1, 1, {0, 0, 0, 0, 0, 1}, {0} };
@@ -50,50 +42,385 @@
/* group users */
static const struct cifs_sid sid_user = {1, 2 , {0, 0, 0, 0, 0, 5}, {} };
+const struct cred *root_cred;
-int match_sid(struct cifs_sid *ctsid)
+static void
+shrink_idmap_tree(struct rb_root *root, int nr_to_scan, int *nr_rem,
+ int *nr_del)
{
- int i, j;
- int num_subauth, num_sat, num_saw;
- struct cifs_sid *cwsid;
+ struct rb_node *node;
+ struct rb_node *tmp;
+ struct cifs_sid_id *psidid;
- if (!ctsid)
- return -1;
-
- for (i = 0; i < NUM_WK_SIDS; ++i) {
- cwsid = &(wksidarr[i].cifssid);
-
- /* compare the revision */
- if (ctsid->revision != cwsid->revision)
- continue;
-
- /* compare all of the six auth values */
- for (j = 0; j < 6; ++j) {
- if (ctsid->authority[j] != cwsid->authority[j])
- break;
+ node = rb_first(root);
+ while (node) {
+ tmp = node;
+ node = rb_next(tmp);
+ psidid = rb_entry(tmp, struct cifs_sid_id, rbnode);
+ if (nr_to_scan == 0 || *nr_del == nr_to_scan)
+ ++(*nr_rem);
+ else {
+ if (time_after(jiffies, psidid->time + SID_MAP_EXPIRE)
+ && psidid->refcount == 0) {
+ rb_erase(tmp, root);
+ ++(*nr_del);
+ } else
+ ++(*nr_rem);
}
- if (j < 6)
- continue; /* all of the auth values did not match */
+ }
+}
- /* compare all of the subauth values if any */
- num_sat = ctsid->num_subauth;
- num_saw = cwsid->num_subauth;
- num_subauth = num_sat < num_saw ? num_sat : num_saw;
- if (num_subauth) {
- for (j = 0; j < num_subauth; ++j) {
- if (ctsid->sub_auth[j] != cwsid->sub_auth[j])
- break;
- }
- if (j < num_subauth)
- continue; /* all sub_auth values do not match */
+/*
+ * Run idmap cache shrinker.
+ */
+static int
+cifs_idmap_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
+{
+ int nr_del = 0;
+ int nr_rem = 0;
+ struct rb_root *root;
+
+ root = &uidtree;
+ spin_lock(&siduidlock);
+ shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
+ spin_unlock(&siduidlock);
+
+ root = &gidtree;
+ spin_lock(&sidgidlock);
+ shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
+ spin_unlock(&sidgidlock);
+
+ return nr_rem;
+}
+
+static struct shrinker cifs_shrinker = {
+ .shrink = cifs_idmap_shrinker,
+ .seeks = DEFAULT_SEEKS,
+};
+
+static int
+cifs_idmap_key_instantiate(struct key *key, const void *data, size_t datalen)
+{
+ char *payload;
+
+ payload = kmalloc(datalen, GFP_KERNEL);
+ if (!payload)
+ return -ENOMEM;
+
+ memcpy(payload, data, datalen);
+ key->payload.data = payload;
+ return 0;
+}
+
+static inline void
+cifs_idmap_key_destroy(struct key *key)
+{
+ kfree(key->payload.data);
+}
+
+struct key_type cifs_idmap_key_type = {
+ .name = "cifs.idmap",
+ .instantiate = cifs_idmap_key_instantiate,
+ .destroy = cifs_idmap_key_destroy,
+ .describe = user_describe,
+ .match = user_match,
+};
+
+static void
+sid_to_str(struct cifs_sid *sidptr, char *sidstr)
+{
+ int i;
+ unsigned long saval;
+ char *strptr;
+
+ strptr = sidstr;
+
+ sprintf(strptr, "%s", "S");
+ strptr = sidstr + strlen(sidstr);
+
+ sprintf(strptr, "-%d", sidptr->revision);
+ strptr = sidstr + strlen(sidstr);
+
+ for (i = 0; i < 6; ++i) {
+ if (sidptr->authority[i]) {
+ sprintf(strptr, "-%d", sidptr->authority[i]);
+ strptr = sidstr + strlen(sidstr);
}
-
- cFYI(1, "matching sid: %s\n", wksidarr[i].sidname);
- return 0; /* sids compare/match */
}
- cFYI(1, "No matching sid");
- return -1;
+ for (i = 0; i < sidptr->num_subauth; ++i) {
+ saval = le32_to_cpu(sidptr->sub_auth[i]);
+ sprintf(strptr, "-%ld", saval);
+ strptr = sidstr + strlen(sidstr);
+ }
+}
+
+static void
+id_rb_insert(struct rb_root *root, struct cifs_sid *sidptr,
+ struct cifs_sid_id **psidid, char *typestr)
+{
+ int rc;
+ char *strptr;
+ struct rb_node *node = root->rb_node;
+ struct rb_node *parent = NULL;
+ struct rb_node **linkto = &(root->rb_node);
+ struct cifs_sid_id *lsidid;
+
+ while (node) {
+ lsidid = rb_entry(node, struct cifs_sid_id, rbnode);
+ parent = node;
+ rc = compare_sids(sidptr, &((lsidid)->sid));
+ if (rc > 0) {
+ linkto = &(node->rb_left);
+ node = node->rb_left;
+ } else if (rc < 0) {
+ linkto = &(node->rb_right);
+ node = node->rb_right;
+ }
+ }
+
+ memcpy(&(*psidid)->sid, sidptr, sizeof(struct cifs_sid));
+ (*psidid)->time = jiffies - (SID_MAP_RETRY + 1);
+ (*psidid)->refcount = 0;
+
+ sprintf((*psidid)->sidstr, "%s", typestr);
+ strptr = (*psidid)->sidstr + strlen((*psidid)->sidstr);
+ sid_to_str(&(*psidid)->sid, strptr);
+
+ clear_bit(SID_ID_PENDING, &(*psidid)->state);
+ clear_bit(SID_ID_MAPPED, &(*psidid)->state);
+
+ rb_link_node(&(*psidid)->rbnode, parent, linkto);
+ rb_insert_color(&(*psidid)->rbnode, root);
+}
+
+static struct cifs_sid_id *
+id_rb_search(struct rb_root *root, struct cifs_sid *sidptr)
+{
+ int rc;
+ struct rb_node *node = root->rb_node;
+ struct cifs_sid_id *lsidid;
+
+ while (node) {
+ lsidid = rb_entry(node, struct cifs_sid_id, rbnode);
+ rc = compare_sids(sidptr, &((lsidid)->sid));
+ if (rc > 0) {
+ node = node->rb_left;
+ } else if (rc < 0) {
+ node = node->rb_right;
+ } else /* node found */
+ return lsidid;
+ }
+
+ return NULL;
+}
+
+static int
+sidid_pending_wait(void *unused)
+{
+ schedule();
+ return signal_pending(current) ? -ERESTARTSYS : 0;
+}
+
+static int
+sid_to_id(struct cifs_sb_info *cifs_sb, struct cifs_sid *psid,
+ struct cifs_fattr *fattr, uint sidtype)
+{
+ int rc;
+ unsigned long cid;
+ struct key *idkey;
+ const struct cred *saved_cred;
+ struct cifs_sid_id *psidid, *npsidid;
+ struct rb_root *cidtree;
+ spinlock_t *cidlock;
+
+ if (sidtype == SIDOWNER) {
+ cid = cifs_sb->mnt_uid; /* default uid, in case upcall fails */
+ cidlock = &siduidlock;
+ cidtree = &uidtree;
+ } else if (sidtype == SIDGROUP) {
+ cid = cifs_sb->mnt_gid; /* default gid, in case upcall fails */
+ cidlock = &sidgidlock;
+ cidtree = &gidtree;
+ } else
+ return -ENOENT;
+
+ spin_lock(cidlock);
+ psidid = id_rb_search(cidtree, psid);
+
+ if (!psidid) { /* node does not exist, allocate one & attempt adding */
+ spin_unlock(cidlock);
+ npsidid = kzalloc(sizeof(struct cifs_sid_id), GFP_KERNEL);
+ if (!npsidid)
+ return -ENOMEM;
+
+ npsidid->sidstr = kmalloc(SIDLEN, GFP_KERNEL);
+ if (!npsidid->sidstr) {
+ kfree(npsidid);
+ return -ENOMEM;
+ }
+
+ spin_lock(cidlock);
+ psidid = id_rb_search(cidtree, psid);
+ if (psidid) { /* node happened to get inserted meanwhile */
+ ++psidid->refcount;
+ spin_unlock(cidlock);
+ kfree(npsidid->sidstr);
+ kfree(npsidid);
+ } else {
+ psidid = npsidid;
+ id_rb_insert(cidtree, psid, &psidid,
+ sidtype == SIDOWNER ? "os:" : "gs:");
+ ++psidid->refcount;
+ spin_unlock(cidlock);
+ }
+ } else {
+ ++psidid->refcount;
+ spin_unlock(cidlock);
+ }
+
+ /*
+ * If we are here, it is safe to access psidid and its fields
+ * since a reference was taken earlier while holding the spinlock.
+ * A reference on the node is put without holding the spinlock
+ * and it is OK to do so in this case, shrinker will not erase
+ * this node until all references are put and we do not access
+ * any fields of the node after a reference is put .
+ */
+ if (test_bit(SID_ID_MAPPED, &psidid->state)) {
+ cid = psidid->id;
+ psidid->time = jiffies; /* update ts for accessing */
+ goto sid_to_id_out;
+ }
+
+ if (time_after(psidid->time + SID_MAP_RETRY, jiffies))
+ goto sid_to_id_out;
+
+ if (!test_and_set_bit(SID_ID_PENDING, &psidid->state)) {
+ saved_cred = override_creds(root_cred);
+ idkey = request_key(&cifs_idmap_key_type, psidid->sidstr, "");
+ if (IS_ERR(idkey))
+ cFYI(1, "%s: Can't map SID to an id", __func__);
+ else {
+ cid = *(unsigned long *)idkey->payload.value;
+ psidid->id = cid;
+ set_bit(SID_ID_MAPPED, &psidid->state);
+ key_put(idkey);
+ kfree(psidid->sidstr);
+ }
+ revert_creds(saved_cred);
+ psidid->time = jiffies; /* update ts for accessing */
+ clear_bit(SID_ID_PENDING, &psidid->state);
+ wake_up_bit(&psidid->state, SID_ID_PENDING);
+ } else {
+ rc = wait_on_bit(&psidid->state, SID_ID_PENDING,
+ sidid_pending_wait, TASK_INTERRUPTIBLE);
+ if (rc) {
+ cFYI(1, "%s: sidid_pending_wait interrupted %d",
+ __func__, rc);
+ --psidid->refcount; /* decremented without spinlock */
+ return rc;
+ }
+ if (test_bit(SID_ID_MAPPED, &psidid->state))
+ cid = psidid->id;
+ }
+
+sid_to_id_out:
+ --psidid->refcount; /* decremented without spinlock */
+ if (sidtype == SIDOWNER)
+ fattr->cf_uid = cid;
+ else
+ fattr->cf_gid = cid;
+
+ return 0;
+}
+
+int
+init_cifs_idmap(void)
+{
+ struct cred *cred;
+ struct key *keyring;
+ int ret;
+
+ cFYI(1, "Registering the %s key type\n", cifs_idmap_key_type.name);
+
+ /* create an override credential set with a special thread keyring in
+ * which requests are cached
+ *
+ * this is used to prevent malicious redirections from being installed
+ * with add_key().
+ */
+ cred = prepare_kernel_cred(NULL);
+ if (!cred)
+ return -ENOMEM;
+
+ keyring = key_alloc(&key_type_keyring, ".cifs_idmap", 0, 0, cred,
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ,
+ KEY_ALLOC_NOT_IN_QUOTA);
+ if (IS_ERR(keyring)) {
+ ret = PTR_ERR(keyring);
+ goto failed_put_cred;
+ }
+
+ ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+ if (ret < 0)
+ goto failed_put_key;
+
+ ret = register_key_type(&cifs_idmap_key_type);
+ if (ret < 0)
+ goto failed_put_key;
+
+ /* instruct request_key() to use this special keyring as a cache for
+ * the results it looks up */
+ cred->thread_keyring = keyring;
+ cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+ root_cred = cred;
+
+ spin_lock_init(&siduidlock);
+ uidtree = RB_ROOT;
+ spin_lock_init(&sidgidlock);
+ gidtree = RB_ROOT;
+
+ register_shrinker(&cifs_shrinker);
+
+ cFYI(1, "cifs idmap keyring: %d\n", key_serial(keyring));
+ return 0;
+
+failed_put_key:
+ key_put(keyring);
+failed_put_cred:
+ put_cred(cred);
+ return ret;
+}
+
+void
+exit_cifs_idmap(void)
+{
+ key_revoke(root_cred->thread_keyring);
+ unregister_key_type(&cifs_idmap_key_type);
+ put_cred(root_cred);
+ unregister_shrinker(&cifs_shrinker);
+ cFYI(1, "Unregistered %s key type\n", cifs_idmap_key_type.name);
+}
+
+void
+cifs_destroy_idmaptrees(void)
+{
+ struct rb_root *root;
+ struct rb_node *node;
+
+ root = &uidtree;
+ spin_lock(&siduidlock);
+ while ((node = rb_first(root)))
+ rb_erase(node, root);
+ spin_unlock(&siduidlock);
+
+ root = &gidtree;
+ spin_lock(&sidgidlock);
+ while ((node = rb_first(root)))
+ rb_erase(node, root);
+ spin_unlock(&sidgidlock);
}
/* if the two SIDs (roughly equivalent to a UUID for a user or group) are
@@ -104,16 +431,24 @@
int num_subauth, num_sat, num_saw;
if ((!ctsid) || (!cwsid))
- return 0;
+ return 1;
/* compare the revision */
- if (ctsid->revision != cwsid->revision)
- return 0;
+ if (ctsid->revision != cwsid->revision) {
+ if (ctsid->revision > cwsid->revision)
+ return 1;
+ else
+ return -1;
+ }
/* compare all of the six auth values */
for (i = 0; i < 6; ++i) {
- if (ctsid->authority[i] != cwsid->authority[i])
- return 0;
+ if (ctsid->authority[i] != cwsid->authority[i]) {
+ if (ctsid->authority[i] > cwsid->authority[i])
+ return 1;
+ else
+ return -1;
+ }
}
/* compare all of the subauth values if any */
@@ -122,12 +457,16 @@
num_subauth = num_sat < num_saw ? num_sat : num_saw;
if (num_subauth) {
for (i = 0; i < num_subauth; ++i) {
- if (ctsid->sub_auth[i] != cwsid->sub_auth[i])
- return 0;
+ if (ctsid->sub_auth[i] != cwsid->sub_auth[i]) {
+ if (ctsid->sub_auth[i] > cwsid->sub_auth[i])
+ return 1;
+ else
+ return -1;
+ }
}
}
- return 1; /* sids compare/match */
+ return 0; /* sids compare/match */
}
@@ -382,22 +721,22 @@
#ifdef CONFIG_CIFS_DEBUG2
dump_ace(ppace[i], end_of_acl);
#endif
- if (compare_sids(&(ppace[i]->sid), pownersid))
+ if (compare_sids(&(ppace[i]->sid), pownersid) == 0)
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
&fattr->cf_mode,
&user_mask);
- if (compare_sids(&(ppace[i]->sid), pgrpsid))
+ if (compare_sids(&(ppace[i]->sid), pgrpsid) == 0)
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
&fattr->cf_mode,
&group_mask);
- if (compare_sids(&(ppace[i]->sid), &sid_everyone))
+ if (compare_sids(&(ppace[i]->sid), &sid_everyone) == 0)
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
&fattr->cf_mode,
&other_mask);
- if (compare_sids(&(ppace[i]->sid), &sid_authusers))
+ if (compare_sids(&(ppace[i]->sid), &sid_authusers) == 0)
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
&fattr->cf_mode,
@@ -475,10 +814,10 @@
/* Convert CIFS ACL to POSIX form */
-static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
- struct cifs_fattr *fattr)
+static int parse_sec_desc(struct cifs_sb_info *cifs_sb,
+ struct cifs_ntsd *pntsd, int acl_len, struct cifs_fattr *fattr)
{
- int rc;
+ int rc = 0;
struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
struct cifs_acl *dacl_ptr; /* no need for SACL ptr */
char *end_of_acl = ((char *)pntsd) + acl_len;
@@ -500,12 +839,26 @@
le32_to_cpu(pntsd->sacloffset), dacloffset);
/* cifs_dump_mem("owner_sid: ", owner_sid_ptr, 64); */
rc = parse_sid(owner_sid_ptr, end_of_acl);
- if (rc)
+ if (rc) {
+ cFYI(1, "%s: Error %d parsing Owner SID", __func__, rc);
return rc;
+ }
+ rc = sid_to_id(cifs_sb, owner_sid_ptr, fattr, SIDOWNER);
+ if (rc) {
+ cFYI(1, "%s: Error %d mapping Owner SID to uid", __func__, rc);
+ return rc;
+ }
rc = parse_sid(group_sid_ptr, end_of_acl);
- if (rc)
+ if (rc) {
+ cFYI(1, "%s: Error %d mapping Owner SID to gid", __func__, rc);
return rc;
+ }
+ rc = sid_to_id(cifs_sb, group_sid_ptr, fattr, SIDGROUP);
+ if (rc) {
+ cFYI(1, "%s: Error %d mapping Group SID to gid", __func__, rc);
+ return rc;
+ }
if (dacloffset)
parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr,
@@ -520,7 +873,7 @@
memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
sizeof(struct cifs_sid)); */
- return 0;
+ return rc;
}
@@ -688,7 +1041,7 @@
}
/* Set an ACL on the server */
-static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
+int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
struct inode *inode, const char *path)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
@@ -727,7 +1080,7 @@
rc = PTR_ERR(pntsd);
cERROR(1, "%s: error %d getting sec desc", __func__, rc);
} else {
- rc = parse_sec_desc(pntsd, acllen, fattr);
+ rc = parse_sec_desc(cifs_sb, pntsd, acllen, fattr);
kfree(pntsd);
if (rc)
cERROR(1, "parse sec desc failed rc = %d", rc);
diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h
index c4ae7d0..5c902c7 100644
--- a/fs/cifs/cifsacl.h
+++ b/fs/cifs/cifsacl.h
@@ -39,6 +39,15 @@
#define ACCESS_ALLOWED 0
#define ACCESS_DENIED 1
+#define SIDOWNER 1
+#define SIDGROUP 2
+#define SIDLEN 150 /* S- 1 revision- 6 authorities- max 5 sub authorities */
+
+#define SID_ID_MAPPED 0
+#define SID_ID_PENDING 1
+#define SID_MAP_EXPIRE (3600 * HZ) /* map entry expires after one hour */
+#define SID_MAP_RETRY (300 * HZ) /* wait 5 minutes for next attempt to map */
+
struct cifs_ntsd {
__le16 revision; /* revision level */
__le16 type;
@@ -74,7 +83,21 @@
char sidname[SIDNAMELENGTH];
} __attribute__((packed));
-extern int match_sid(struct cifs_sid *);
+struct cifs_sid_id {
+ unsigned int refcount; /* increment with spinlock, decrement without */
+ unsigned long id;
+ unsigned long time;
+ unsigned long state;
+ char *sidstr;
+ struct rb_node rbnode;
+ struct cifs_sid sid;
+};
+
+#ifdef __KERNEL__
+extern struct key_type cifs_idmap_key_type;
+extern const struct cred *root_cred;
+#endif /* KERNEL */
+
extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
#endif /* _CIFSACL_H */
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index d1a016b..45c3f78 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -60,7 +60,7 @@
server->session_key.response, server->session_key.len);
crypto_shash_update(&server->secmech.sdescmd5->shash,
- cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
+ cifs_pdu->Protocol, be32_to_cpu(cifs_pdu->smb_buf_length));
rc = crypto_shash_final(&server->secmech.sdescmd5->shash, signature);
@@ -268,10 +268,11 @@
}
#ifdef CONFIG_CIFS_WEAK_PW_HASH
-void calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
+int calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
char *lnm_session_key)
{
int i;
+ int rc;
char password_with_pad[CIFS_ENCPWD_SIZE];
memset(password_with_pad, 0, CIFS_ENCPWD_SIZE);
@@ -282,7 +283,7 @@
memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
memcpy(lnm_session_key, password_with_pad,
CIFS_ENCPWD_SIZE);
- return;
+ return 0;
}
/* calculate old style session key */
@@ -299,10 +300,9 @@
for (i = 0; i < CIFS_ENCPWD_SIZE; i++)
password_with_pad[i] = toupper(password_with_pad[i]);
- SMBencrypt(password_with_pad, cryptkey, lnm_session_key);
+ rc = SMBencrypt(password_with_pad, cryptkey, lnm_session_key);
- /* clear password before we return/free memory */
- memset(password_with_pad, 0, CIFS_ENCPWD_SIZE);
+ return rc;
}
#endif /* CIFS_WEAK_PW_HASH */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 5c412b3..493b74c 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -128,29 +128,22 @@
}
cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages;
-#ifdef CONFIG_CIFS_DFS_UPCALL
- /* copy mount params to sb for use in submounts */
- /* BB: should we move this after the mount so we
- * do not have to do the copy on failed mounts?
- * BB: May be it is better to do simple copy before
- * complex operation (mount), and in case of fail
- * just exit instead of doing mount and attempting
- * undo it if this copy fails?*/
+ /*
+ * Copy mount params to sb for use in submounts. Better to do
+ * the copy here and deal with the error before cleanup gets
+ * complicated post-mount.
+ */
if (data) {
- int len = strlen(data);
- cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
+ cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL);
if (cifs_sb->mountdata == NULL) {
bdi_destroy(&cifs_sb->bdi);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
return -ENOMEM;
}
- strncpy(cifs_sb->mountdata, data, len + 1);
- cifs_sb->mountdata[len] = '\0';
}
-#endif
- rc = cifs_mount(sb, cifs_sb, data, devname);
+ rc = cifs_mount(sb, cifs_sb, devname);
if (rc) {
if (!silent)
@@ -163,7 +156,7 @@
sb->s_bdi = &cifs_sb->bdi;
sb->s_blocksize = CIFS_MAX_MSGSIZE;
sb->s_blocksize_bits = 14; /* default 2**14 = CIFS_MAX_MSGSIZE */
- inode = cifs_root_iget(sb, ROOT_I);
+ inode = cifs_root_iget(sb);
if (IS_ERR(inode)) {
rc = PTR_ERR(inode);
@@ -184,12 +177,12 @@
else
sb->s_d_op = &cifs_dentry_ops;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CIFS_NFSD_EXPORT
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
cFYI(1, "export ops supported");
sb->s_export_op = &cifs_export_ops;
}
-#endif /* EXPERIMENTAL */
+#endif /* CIFS_NFSD_EXPORT */
return 0;
@@ -202,12 +195,10 @@
out_mount_failed:
if (cifs_sb) {
-#ifdef CONFIG_CIFS_DFS_UPCALL
if (cifs_sb->mountdata) {
kfree(cifs_sb->mountdata);
cifs_sb->mountdata = NULL;
}
-#endif
unload_nls(cifs_sb->local_nls);
bdi_destroy(&cifs_sb->bdi);
kfree(cifs_sb);
@@ -231,12 +222,10 @@
rc = cifs_umount(sb, cifs_sb);
if (rc)
cERROR(1, "cifs_umount failed with return code %d", rc);
-#ifdef CONFIG_CIFS_DFS_UPCALL
if (cifs_sb->mountdata) {
kfree(cifs_sb->mountdata);
cifs_sb->mountdata = NULL;
}
-#endif
unload_nls(cifs_sb->local_nls);
bdi_destroy(&cifs_sb->bdi);
@@ -618,16 +607,31 @@
{
/* origin == SEEK_END => we must revalidate the cached file length */
if (origin == SEEK_END) {
- int retval;
+ int rc;
+ struct inode *inode = file->f_path.dentry->d_inode;
- /* some applications poll for the file length in this strange
- way so we must seek to end on non-oplocked files by
- setting the revalidate time to zero */
- CIFS_I(file->f_path.dentry->d_inode)->time = 0;
+ /*
+ * We need to be sure that all dirty pages are written and the
+ * server has the newest file length.
+ */
+ if (!CIFS_I(inode)->clientCanCacheRead && inode->i_mapping &&
+ inode->i_mapping->nrpages != 0) {
+ rc = filemap_fdatawait(inode->i_mapping);
+ if (rc) {
+ mapping_set_error(inode->i_mapping, rc);
+ return rc;
+ }
+ }
+ /*
+ * Some applications poll for the file length in this strange
+ * way so we must seek to end on non-oplocked files by
+ * setting the revalidate time to zero.
+ */
+ CIFS_I(inode)->time = 0;
- retval = cifs_revalidate_file(file);
- if (retval < 0)
- return (loff_t)retval;
+ rc = cifs_revalidate_file_attr(file);
+ if (rc < 0)
+ return (loff_t)rc;
}
return generic_file_llseek_unlocked(file, offset, origin);
}
@@ -760,10 +764,11 @@
};
const struct file_operations cifs_file_direct_ops = {
- /* no aio, no readv -
- BB reevaluate whether they can be done with directio, no cache */
- .read = cifs_user_read,
- .write = cifs_user_write,
+ /* BB reevaluate whether they can be done with directio, no cache */
+ .read = do_sync_read,
+ .write = do_sync_write,
+ .aio_read = cifs_user_readv,
+ .aio_write = cifs_user_writev,
.open = cifs_open,
.release = cifs_close,
.lock = cifs_lock,
@@ -815,10 +820,11 @@
};
const struct file_operations cifs_file_direct_nobrl_ops = {
- /* no mmap, no aio, no readv -
- BB reevaluate whether they can be done with directio, no cache */
- .read = cifs_user_read,
- .write = cifs_user_write,
+ /* BB reevaluate whether they can be done with directio, no cache */
+ .read = do_sync_read,
+ .write = do_sync_write,
+ .aio_read = cifs_user_readv,
+ .aio_write = cifs_user_writev,
.open = cifs_open,
.release = cifs_close,
.fsync = cifs_fsync,
@@ -981,10 +987,10 @@
int rc = 0;
cifs_proc_init();
INIT_LIST_HEAD(&cifs_tcp_ses_list);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */
INIT_LIST_HEAD(&GlobalDnotifyReqList);
INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
-#endif
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
/*
* Initialize Global counters
*/
@@ -1033,22 +1039,33 @@
if (rc)
goto out_destroy_mids;
- rc = register_filesystem(&cifs_fs_type);
- if (rc)
- goto out_destroy_request_bufs;
#ifdef CONFIG_CIFS_UPCALL
rc = register_key_type(&cifs_spnego_key_type);
if (rc)
- goto out_unregister_filesystem;
-#endif
+ goto out_destroy_request_bufs;
+#endif /* CONFIG_CIFS_UPCALL */
+
+#ifdef CONFIG_CIFS_ACL
+ rc = init_cifs_idmap();
+ if (rc)
+ goto out_register_key_type;
+#endif /* CONFIG_CIFS_ACL */
+
+ rc = register_filesystem(&cifs_fs_type);
+ if (rc)
+ goto out_init_cifs_idmap;
return 0;
-#ifdef CONFIG_CIFS_UPCALL
-out_unregister_filesystem:
- unregister_filesystem(&cifs_fs_type);
+out_init_cifs_idmap:
+#ifdef CONFIG_CIFS_ACL
+ exit_cifs_idmap();
+out_register_key_type:
#endif
+#ifdef CONFIG_CIFS_UPCALL
+ unregister_key_type(&cifs_spnego_key_type);
out_destroy_request_bufs:
+#endif
cifs_destroy_request_bufs();
out_destroy_mids:
cifs_destroy_mids();
@@ -1070,6 +1087,10 @@
#ifdef CONFIG_CIFS_DFS_UPCALL
cifs_dfs_release_automount_timer();
#endif
+#ifdef CONFIG_CIFS_ACL
+ cifs_destroy_idmaptrees();
+ exit_cifs_idmap();
+#endif
#ifdef CONFIG_CIFS_UPCALL
unregister_key_type(&cifs_spnego_key_type);
#endif
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index a9371b6..64313f7 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -47,7 +47,7 @@
/* Functions related to inodes */
extern const struct inode_operations cifs_dir_inode_ops;
-extern struct inode *cifs_root_iget(struct super_block *, unsigned long);
+extern struct inode *cifs_root_iget(struct super_block *);
extern int cifs_create(struct inode *, struct dentry *, int,
struct nameidata *);
extern struct dentry *cifs_lookup(struct inode *, struct dentry *,
@@ -59,9 +59,11 @@
extern int cifs_rmdir(struct inode *, struct dentry *);
extern int cifs_rename(struct inode *, struct dentry *, struct inode *,
struct dentry *);
+extern int cifs_revalidate_file_attr(struct file *filp);
+extern int cifs_revalidate_dentry_attr(struct dentry *);
extern int cifs_revalidate_file(struct file *filp);
extern int cifs_revalidate_dentry(struct dentry *);
-extern void cifs_invalidate_mapping(struct inode *inode);
+extern int cifs_invalidate_mapping(struct inode *inode);
extern int cifs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int cifs_setattr(struct dentry *, struct iattr *);
@@ -80,12 +82,12 @@
extern int cifs_open(struct inode *inode, struct file *file);
extern int cifs_close(struct inode *inode, struct file *file);
extern int cifs_closedir(struct inode *inode, struct file *file);
-extern ssize_t cifs_user_read(struct file *file, char __user *read_data,
- size_t read_size, loff_t *poffset);
+extern ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos);
extern ssize_t cifs_strict_readv(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
-extern ssize_t cifs_user_write(struct file *file, const char __user *write_data,
- size_t write_size, loff_t *poffset);
+extern ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos);
extern ssize_t cifs_strict_writev(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
extern int cifs_lock(struct file *, int, struct file_lock *);
@@ -123,9 +125,9 @@
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CIFS_NFSD_EXPORT
extern const struct export_operations cifs_export_ops;
-#endif /* EXPERIMENTAL */
+#endif /* CIFS_NFSD_EXPORT */
-#define CIFS_VERSION "1.71"
+#define CIFS_VERSION "1.72"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a5d1106..76b4517 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -274,7 +274,8 @@
int capabilities;
char serverName[SERVER_NAME_LEN_WITH_NULL * 2]; /* BB make bigger for
TCP names - will ipv6 and sctp addresses fit? */
- char *user_name;
+ char *user_name; /* must not be null except during init of sess
+ and after mount option parsing we fill it */
char *domainName;
char *password;
struct session_key auth_key;
@@ -780,10 +781,12 @@
*/
GLOBAL_EXTERN spinlock_t cifs_file_list_lock;
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */
/* Outstanding dir notify requests */
GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
/* DirNotify response queue */
GLOBAL_EXTERN struct list_head GlobalDnotifyRsp_Q;
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
/*
* Global transaction id (XID) information
@@ -830,6 +833,11 @@
/* reconnect after this many failed echo attempts */
GLOBAL_EXTERN unsigned short echo_retries;
+GLOBAL_EXTERN struct rb_root uidtree;
+GLOBAL_EXTERN struct rb_root gidtree;
+GLOBAL_EXTERN spinlock_t siduidlock;
+GLOBAL_EXTERN spinlock_t sidgidlock;
+
void cifs_oplock_break(struct work_struct *work);
void cifs_oplock_break_get(struct cifsFileInfo *cfile);
void cifs_oplock_break_put(struct cifsFileInfo *cfile);
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index b5c8cc5..de3aa28 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -397,9 +397,9 @@
#define GETU32(var) (*((__u32 *)var)) /* BB check for endian issues */
struct smb_hdr {
- __u32 smb_buf_length; /* big endian on wire *//* BB length is only two
- or three bytes - with one or two byte type preceding it that are
- zero - we could mask the type byte off just in case BB */
+ __be32 smb_buf_length; /* BB length is only two (rarely three) bytes,
+ with one or two byte "type" preceding it that will be
+ zero - we could mask the type byte off */
__u8 Protocol[4];
__u8 Command;
union {
@@ -428,43 +428,28 @@
__u8 WordCount;
} __attribute__((packed));
-/* given a pointer to an smb_hdr retrieve a char pointer to the byte count */
-#define BCC(smb_var) ((unsigned char *)(smb_var) + sizeof(struct smb_hdr) + \
- (2 * (smb_var)->WordCount))
+/* given a pointer to an smb_hdr, retrieve a void pointer to the ByteCount */
+static inline void *
+BCC(struct smb_hdr *smb)
+{
+ return (void *)smb + sizeof(*smb) + 2 * smb->WordCount;
+}
/* given a pointer to an smb_hdr retrieve the pointer to the byte area */
#define pByteArea(smb_var) (BCC(smb_var) + 2)
-/* get the converted ByteCount for a SMB packet and return it */
-static inline __u16
-get_bcc(struct smb_hdr *hdr)
-{
- __u16 *bc_ptr = (__u16 *)BCC(hdr);
-
- return get_unaligned(bc_ptr);
-}
-
/* get the unconverted ByteCount for a SMB packet and return it */
static inline __u16
-get_bcc_le(struct smb_hdr *hdr)
+get_bcc(struct smb_hdr *hdr)
{
__le16 *bc_ptr = (__le16 *)BCC(hdr);
return get_unaligned_le16(bc_ptr);
}
-/* set the ByteCount for a SMB packet in host-byte order */
-static inline void
-put_bcc(__u16 count, struct smb_hdr *hdr)
-{
- __u16 *bc_ptr = (__u16 *)BCC(hdr);
-
- put_unaligned(count, bc_ptr);
-}
-
/* set the ByteCount for a SMB packet in little-endian */
static inline void
-put_bcc_le(__u16 count, struct smb_hdr *hdr)
+put_bcc(__u16 count, struct smb_hdr *hdr)
{
__le16 *bc_ptr = (__le16 *)BCC(hdr);
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 8096f27..6e69e06 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -53,6 +53,9 @@
cFYI(1, "CIFS VFS: leaving %s (xid = %d) rc = %d", \
__func__, curr_xid, (int)rc); \
} while (0)
+extern int init_cifs_idmap(void);
+extern void exit_cifs_idmap(void);
+extern void cifs_destroy_idmaptrees(void);
extern char *build_path_from_dentry(struct dentry *);
extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
struct cifsTconInfo *tcon);
@@ -90,7 +93,6 @@
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool);
extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool);
extern unsigned int smbCalcSize(struct smb_hdr *ptr);
-extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
struct TCP_Server_Info *server);
extern int cifs_convert_address(struct sockaddr *dst, const char *src, int len);
@@ -143,8 +145,10 @@
extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
const char *, u32 *);
+extern int set_cifs_acl(struct cifs_ntsd *, __u32, struct inode *,
+ const char *);
-extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
+extern int cifs_mount(struct super_block *, struct cifs_sb_info *,
const char *);
extern int cifs_umount(struct super_block *, struct cifs_sb_info *);
extern void cifs_dfs_release_automount_timer(void);
@@ -304,12 +308,13 @@
struct cifsTconInfo *tcon,
const unsigned char *searchName, char **syminfo,
const struct nls_table *nls_codepage);
+#ifdef CONFIG_CIFS_SYMLINK_EXPERIMENTAL
extern int CIFSSMBQueryReparseLinkInfo(const int xid,
struct cifsTconInfo *tcon,
const unsigned char *searchName,
char *symlinkinfo, const int buflen, __u16 fid,
const struct nls_table *nls_codepage);
-
+#endif /* temporarily unused until cifs_symlink fixed */
extern int CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int disposition,
const int access_flags, const int omode,
@@ -348,8 +353,6 @@
const unsigned char *searchName, __u64 *inode_number,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
- const struct nls_table *cp, int mapChars);
extern int CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
const __u16 netfid, const __u64 len,
@@ -383,9 +386,15 @@
extern int calc_seckey(struct cifsSesInfo *);
#ifdef CONFIG_CIFS_WEAK_PW_HASH
-extern void calc_lanman_hash(const char *password, const char *cryptkey,
+extern int calc_lanman_hash(const char *password, const char *cryptkey,
bool encrypt, char *lnm_session_key);
#endif /* CIFS_WEAK_PW_HASH */
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */
+extern int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
+ const int notify_subdirs, const __u16 netfid,
+ __u32 filter, struct file *file, int multishot,
+ const struct nls_table *nls_codepage);
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
extern int CIFSSMBCopy(int xid,
struct cifsTconInfo *source_tcon,
const char *fromName,
@@ -393,10 +402,6 @@
const char *toName, const int flags,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
- const int notify_subdirs, const __u16 netfid,
- __u32 filter, struct file *file, int multishot,
- const struct nls_table *nls_codepage);
extern ssize_t CIFSSMBQAllEAs(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
const unsigned char *ea_name, char *EAData,
@@ -427,9 +432,6 @@
struct cifs_sb_info *cifs_sb, int xid);
extern int mdfour(unsigned char *, unsigned char *, int);
extern int E_md4hash(const unsigned char *passwd, unsigned char *p16);
-extern void SMBencrypt(unsigned char *passwd, const unsigned char *c8,
- unsigned char *p24);
-extern void E_P16(unsigned char *p14, unsigned char *p16);
-extern void E_P24(unsigned char *p21, const unsigned char *c8,
+extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8,
unsigned char *p24);
#endif /* _CIFSPROTO_H */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index df959ba..83df937 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -339,12 +339,13 @@
get_unaligned_le16(&pSMB->t2_rsp.DataOffset) > 1024)
goto vt2_err;
- /* check that bcc is at least as big as parms + data */
- /* check that bcc is less than negotiated smb buffer */
total_size = get_unaligned_le16(&pSMB->t2_rsp.ParameterCount);
if (total_size >= 512)
goto vt2_err;
+ /* check that bcc is at least as big as parms + data, and that it is
+ * less than negotiated smb buffer
+ */
total_size += get_unaligned_le16(&pSMB->t2_rsp.DataCount);
if (total_size > get_bcc(&pSMB->hdr) ||
total_size >= CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
@@ -357,6 +358,13 @@
return -EINVAL;
}
+static inline void inc_rfc1001_len(void *pSMB, int count)
+{
+ struct smb_hdr *hdr = (struct smb_hdr *)pSMB;
+
+ be32_add_cpu(&hdr->smb_buf_length, count);
+}
+
int
CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
{
@@ -409,7 +417,7 @@
count += strlen(protocols[i].name) + 1;
/* null at end of source and target buffers anyway */
}
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
@@ -541,10 +549,6 @@
server->secType = RawNTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
-/* #ifdef CONFIG_CIFS_EXPERIMENTAL
- else if (secFlags & CIFSSEC_MAY_PLNTXT)
- server->secType = ??
-#endif */
else {
rc = -EOPNOTSUPP;
cERROR(1, "Invalid security type");
@@ -578,7 +582,7 @@
if ((pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC) &&
(server->capabilities & CAP_EXTENDED_SECURITY)) {
- count = pSMBr->ByteCount;
+ count = get_bcc(&pSMBr->hdr);
if (count < 16) {
rc = -EIO;
goto neg_err_exit;
@@ -732,9 +736,9 @@
smb->hdr.Tid = 0xffff;
smb->hdr.WordCount = 1;
put_unaligned_le16(1, &smb->EchoCount);
- put_bcc_le(1, &smb->hdr);
+ put_bcc(1, &smb->hdr);
smb->Data[0] = 'a';
- smb->hdr.smb_buf_length += 3;
+ inc_rfc1001_len(smb, 3);
rc = cifs_call_async(server, (struct smb_hdr *)smb,
cifs_echo_callback, server);
@@ -852,7 +856,7 @@
pSMB->TotalParameterCount = pSMB->ParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_POSIX_UNLINK);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -898,7 +902,7 @@
pSMB->SearchAttributes =
cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM);
pSMB->BufferFormat = 0x04;
- pSMB->hdr.smb_buf_length += name_len + 1;
+ inc_rfc1001_len(pSMB, name_len + 1);
pSMB->ByteCount = cpu_to_le16(name_len + 1);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -942,7 +946,7 @@
}
pSMB->BufferFormat = 0x04;
- pSMB->hdr.smb_buf_length += name_len + 1;
+ inc_rfc1001_len(pSMB, name_len + 1);
pSMB->ByteCount = cpu_to_le16(name_len + 1);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -985,7 +989,7 @@
}
pSMB->BufferFormat = 0x04;
- pSMB->hdr.smb_buf_length += name_len + 1;
+ inc_rfc1001_len(pSMB, name_len + 1);
pSMB->ByteCount = cpu_to_le16(name_len + 1);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -1063,7 +1067,7 @@
pSMB->TotalParameterCount = pSMB->ParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_POSIX_OPEN);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -1075,7 +1079,7 @@
cFYI(1, "copying inode info");
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < sizeof(OPEN_PSX_RSP))) {
+ if (rc || get_bcc(&pSMBr->hdr) < sizeof(OPEN_PSX_RSP)) {
rc = -EIO; /* bad smb */
goto psx_create_err;
}
@@ -1096,7 +1100,7 @@
pRetData->Type = cpu_to_le32(-1); /* unknown */
cFYI(DBG2, "unknown type");
} else {
- if (pSMBr->ByteCount < sizeof(OPEN_PSX_RSP)
+ if (get_bcc(&pSMBr->hdr) < sizeof(OPEN_PSX_RSP)
+ sizeof(FILE_UNIX_BASIC_INFO)) {
cERROR(1, "Open response data too small");
pRetData->Type = cpu_to_le32(-1);
@@ -1228,7 +1232,7 @@
pSMB->Sattr = cpu_to_le16(ATTR_HIDDEN | ATTR_SYSTEM | ATTR_DIRECTORY);
pSMB->OpenFunction = cpu_to_le16(convert_disposition(openDisposition));
count += name_len;
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
/* long_op set to 1 to allow for oplock break timeouts */
@@ -1341,7 +1345,7 @@
SECURITY_CONTEXT_TRACKING | SECURITY_EFFECTIVE_ONLY;
count += name_len;
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
/* long_op set to 1 to allow for oplock break timeouts */
@@ -1426,7 +1430,7 @@
}
iov[0].iov_base = (char *)pSMB;
- iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+ iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4;
rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovecs */,
&resp_buf_type, CIFS_LOG_ERROR);
cifs_stats_inc(&tcon->num_reads);
@@ -1560,7 +1564,7 @@
pSMB->DataLengthLow = cpu_to_le16(bytes_sent & 0xFFFF);
pSMB->DataLengthHigh = cpu_to_le16(bytes_sent >> 16);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
if (wct == 14)
pSMB->ByteCount = cpu_to_le16(byte_count);
@@ -1644,11 +1648,12 @@
pSMB->DataLengthLow = cpu_to_le16(count & 0xFFFF);
pSMB->DataLengthHigh = cpu_to_le16(count >> 16);
- smb_hdr_len = pSMB->hdr.smb_buf_length + 1; /* hdr + 1 byte pad */
+ /* header + 1 byte pad */
+ smb_hdr_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 1;
if (wct == 14)
- pSMB->hdr.smb_buf_length += count+1;
+ inc_rfc1001_len(pSMB, count + 1);
else /* wct == 12 */
- pSMB->hdr.smb_buf_length += count+5; /* smb data starts later */
+ inc_rfc1001_len(pSMB, count + 5); /* smb data starts later */
if (wct == 14)
pSMB->ByteCount = cpu_to_le16(count + 1);
else /* wct == 12 */ /* bigger pad, smaller smb hdr, keep offset ok */ {
@@ -1748,7 +1753,7 @@
/* oplock break */
count = 0;
}
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
if (waitFlag) {
@@ -1839,14 +1844,14 @@
pSMB->Fid = smb_file_id;
pSMB->InformationLevel = cpu_to_le16(SMB_SET_POSIX_LOCK);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
if (waitFlag) {
rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned);
} else {
iov[0].iov_base = (char *)pSMB;
- iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+ iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4;
rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovecs */,
&resp_buf_type, timeout);
pSMB = NULL; /* request buf already freed by SendReceive2. Do
@@ -1862,7 +1867,7 @@
__u16 data_count;
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < sizeof(struct cifs_posix_lock))) {
+ if (rc || get_bcc(&pSMBr->hdr) < sizeof(*parm_data)) {
rc = -EIO; /* bad smb */
goto plk_err_exit;
}
@@ -2012,7 +2017,7 @@
}
count = 1 /* 1st signature byte */ + name_len + name_len2;
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2092,7 +2097,7 @@
pSMB->InformationLevel =
cpu_to_le16(SMB_SET_FILE_RENAME_INFORMATION);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, pTcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2159,7 +2164,7 @@
}
count = 1 /* 1st signature byte */ + name_len + name_len2;
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2249,7 +2254,7 @@
pSMB->DataOffset = cpu_to_le16(offset);
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_LINK);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2335,7 +2340,7 @@
pSMB->DataOffset = cpu_to_le16(offset);
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_HLINK);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2406,7 +2411,7 @@
}
count = 1 /* string type byte */ + name_len + name_len2;
- pSMB->hdr.smb_buf_length += count;
+ inc_rfc1001_len(pSMB, count);
pSMB->ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2477,7 +2482,7 @@
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_LINK);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2489,7 +2494,7 @@
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
/* BB also check enough total bytes returned */
- if (rc || (pSMBr->ByteCount < 2))
+ if (rc || get_bcc(&pSMBr->hdr) < 2)
rc = -EIO;
else {
bool is_unicode;
@@ -2516,7 +2521,17 @@
return rc;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_SYMLINK_EXPERIMENTAL
+/*
+ * Recent Windows versions now create symlinks more frequently
+ * and they use the "reparse point" mechanism below. We can of course
+ * do symlinks nicely to Samba and other servers which support the
+ * CIFS Unix Extensions and we can also do SFU symlinks and "client only"
+ * "MF" symlinks optionally, but for recent Windows we really need to
+ * reenable the code below and fix the cifs_symlink callers to handle this.
+ * In the interim this code has been moved to its own config option so
+ * it is not compiled in by default until callers fixed up and more tested.
+ */
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
@@ -2561,14 +2576,14 @@
} else { /* decode response */
__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
__u32 data_count = le32_to_cpu(pSMBr->DataCount);
- if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
- /* BB also check enough total bytes returned */
+ if (get_bcc(&pSMBr->hdr) < 2 || data_offset > 512) {
+ /* BB also check enough total bytes returned */
rc = -EIO; /* bad smb */
goto qreparse_out;
}
if (data_count && (data_count < 2048)) {
char *end_of_smb = 2 /* sizeof byte count */ +
- pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
+ get_bcc(&pSMBr->hdr) + (char *)&pSMBr->ByteCount;
struct reparse_data *reparse_buf =
(struct reparse_data *)
@@ -2618,7 +2633,7 @@
return rc;
}
-#endif /* CIFS_EXPERIMENTAL */
+#endif /* CIFS_SYMLINK_EXPERIMENTAL */ /* BB temporarily unused */
#ifdef CONFIG_CIFS_POSIX
@@ -2814,7 +2829,7 @@
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_POSIX_ACL);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2826,8 +2841,8 @@
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
+ if (rc || get_bcc(&pSMBr->hdr) < 2)
rc = -EIO; /* bad smb */
else {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -2908,7 +2923,7 @@
pSMB->ParameterCount = cpu_to_le16(params);
pSMB->TotalParameterCount = pSMB->ParameterCount;
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2966,7 +2981,7 @@
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_ATTR_FLAGS);
pSMB->Pad = 0;
pSMB->Fid = netfid;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->t2.ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2976,8 +2991,8 @@
} else {
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
+ if (rc || get_bcc(&pSMBr->hdr) < 2)
/* If rc should we check for EOPNOSUPP and
disable the srvino flag? or in caller? */
rc = -EIO; /* bad smb */
@@ -3052,6 +3067,7 @@
char *end_of_smb;
__u32 data_count, data_offset, parm_count, parm_offset;
struct smb_com_ntransact_rsp *pSMBr;
+ u16 bcc;
*pdatalen = 0;
*pparmlen = 0;
@@ -3061,8 +3077,8 @@
pSMBr = (struct smb_com_ntransact_rsp *)buf;
- /* ByteCount was converted from little endian in SendReceive */
- end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
+ bcc = get_bcc(&pSMBr->hdr);
+ end_of_smb = 2 /* sizeof byte count */ + bcc +
(char *)&pSMBr->ByteCount;
data_offset = le32_to_cpu(pSMBr->DataOffset);
@@ -3088,7 +3104,7 @@
*ppdata, data_count, (data_count + *ppdata),
end_of_smb, pSMBr);
return -EINVAL;
- } else if (parm_count + data_count > pSMBr->ByteCount) {
+ } else if (parm_count + data_count > bcc) {
cFYI(1, "parm count and data count larger than SMB");
return -EINVAL;
}
@@ -3124,9 +3140,9 @@
pSMB->AclFlags = cpu_to_le32(CIFS_ACL_OWNER | CIFS_ACL_GROUP |
CIFS_ACL_DACL);
pSMB->ByteCount = cpu_to_le16(11); /* 3 bytes pad + 8 bytes parm */
- pSMB->hdr.smb_buf_length += 11;
+ inc_rfc1001_len(pSMB, 11);
iov[0].iov_base = (char *)pSMB;
- iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+ iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4;
rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovec */, &buf_type,
0);
@@ -3235,10 +3251,9 @@
memcpy((char *) &pSMBr->hdr.Protocol + data_offset,
(char *) pntsd,
acllen);
- pSMB->hdr.smb_buf_length += (byte_count + data_count);
-
+ inc_rfc1001_len(pSMB, byte_count + data_count);
} else
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -3289,7 +3304,7 @@
}
pSMB->BufferFormat = 0x04;
name_len++; /* account for buffer type byte */
- pSMB->hdr.smb_buf_length += (__u16) name_len;
+ inc_rfc1001_len(pSMB, (__u16)name_len);
pSMB->ByteCount = cpu_to_le16(name_len);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3364,7 +3379,7 @@
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_ALL_INFO);
pSMB->Pad = 0;
pSMB->Fid = netfid;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -3375,7 +3390,7 @@
if (rc) /* BB add auto retry on EOPNOTSUPP? */
rc = -EIO;
- else if (pSMBr->ByteCount < 40)
+ else if (get_bcc(&pSMBr->hdr) < 40)
rc = -EIO; /* bad smb */
else if (pFindData) {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -3451,7 +3466,7 @@
else
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_ALL_INFO);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3463,9 +3478,9 @@
if (rc) /* BB add auto retry on EOPNOTSUPP? */
rc = -EIO;
- else if (!legacy && (pSMBr->ByteCount < 40))
+ else if (!legacy && get_bcc(&pSMBr->hdr) < 40)
rc = -EIO; /* bad smb */
- else if (legacy && (pSMBr->ByteCount < 24))
+ else if (legacy && get_bcc(&pSMBr->hdr) < 24)
rc = -EIO; /* 24 or 26 expected but we do not read
last field */
else if (pFindData) {
@@ -3532,7 +3547,7 @@
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC);
pSMB->Pad = 0;
pSMB->Fid = netfid;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -3541,7 +3556,7 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < sizeof(FILE_UNIX_BASIC_INFO))) {
+ if (rc || get_bcc(&pSMBr->hdr) < sizeof(FILE_UNIX_BASIC_INFO)) {
cERROR(1, "Malformed FILE_UNIX_BASIC_INFO response.\n"
"Unix Extensions can be disabled on mount "
"by specifying the nosfu mount option.");
@@ -3617,7 +3632,7 @@
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3627,7 +3642,7 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < sizeof(FILE_UNIX_BASIC_INFO))) {
+ if (rc || get_bcc(&pSMBr->hdr) < sizeof(FILE_UNIX_BASIC_INFO)) {
cERROR(1, "Malformed FILE_UNIX_BASIC_INFO response.\n"
"Unix Extensions can be disabled on mount "
"by specifying the nosfu mount option.");
@@ -3731,7 +3746,7 @@
/* BB what should we set StorageType to? Does it matter? BB */
pSMB->SearchStorageType = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3860,7 +3875,7 @@
byte_count = params + 1 /* pad */ ;
pSMB->TotalParameterCount = cpu_to_le16(params);
pSMB->ParameterCount = pSMB->TotalParameterCount;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4022,7 +4037,7 @@
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_INTERNAL_INFO);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4032,8 +4047,8 @@
} else {
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
+ if (rc || get_bcc(&pSMBr->hdr) < 2)
/* If rc should we check for EOPNOSUPP and
disable the srvino flag? or in caller? */
rc = -EIO; /* bad smb */
@@ -4246,7 +4261,7 @@
pSMB->ParameterCount = cpu_to_le16(params);
pSMB->TotalParameterCount = pSMB->ParameterCount;
pSMB->MaxReferralLevel = cpu_to_le16(3);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
@@ -4258,13 +4273,13 @@
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
/* BB Also check if enough total bytes returned? */
- if (rc || (pSMBr->ByteCount < 17)) {
+ if (rc || get_bcc(&pSMBr->hdr) < 17) {
rc = -EIO; /* bad smb */
goto GetDFSRefExit;
}
cFYI(1, "Decoding GetDFSRefer response BCC: %d Offset %d",
- pSMBr->ByteCount,
+ get_bcc(&pSMBr->hdr),
le16_to_cpu(pSMBr->t2.DataOffset));
/* parse returned result into more usable form */
@@ -4320,7 +4335,7 @@
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
pSMB->InformationLevel = cpu_to_le16(SMB_INFO_ALLOCATION);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4330,12 +4345,12 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 18))
+ if (rc || get_bcc(&pSMBr->hdr) < 18)
rc = -EIO; /* bad smb */
else {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
cFYI(1, "qfsinf resp BCC: %d Offset %d",
- pSMBr->ByteCount, data_offset);
+ get_bcc(&pSMBr->hdr), data_offset);
response_data = (FILE_SYSTEM_ALLOC_INFO *)
(((char *) &pSMBr->hdr.Protocol) + data_offset);
@@ -4399,7 +4414,7 @@
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_SIZE_INFO);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4409,7 +4424,7 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 24))
+ if (rc || get_bcc(&pSMBr->hdr) < 24)
rc = -EIO; /* bad smb */
else {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4479,7 +4494,7 @@
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_ATTRIBUTE_INFO);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4489,7 +4504,7 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 13)) {
+ if (rc || get_bcc(&pSMBr->hdr) < 13) {
/* BB also check if enough bytes returned */
rc = -EIO; /* bad smb */
} else {
@@ -4550,7 +4565,7 @@
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_DEVICE_INFO);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4560,7 +4575,8 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < sizeof(FILE_SYSTEM_DEVICE_INFO)))
+ if (rc || get_bcc(&pSMBr->hdr) <
+ sizeof(FILE_SYSTEM_DEVICE_INFO))
rc = -EIO; /* bad smb */
else {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4619,7 +4635,7 @@
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_CIFS_UNIX_INFO);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4629,7 +4645,7 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 13)) {
+ if (rc || get_bcc(&pSMBr->hdr) < 13) {
rc = -EIO; /* bad smb */
} else {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4702,7 +4718,7 @@
pSMB->ClientUnixMinor = cpu_to_le16(CIFS_UNIX_MINOR_VERSION);
pSMB->ClientUnixCap = cpu_to_le64(cap);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4764,7 +4780,7 @@
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_POSIX_FS_INFO);
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4774,7 +4790,7 @@
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 13)) {
+ if (rc || get_bcc(&pSMBr->hdr) < 13) {
rc = -EIO; /* bad smb */
} else {
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4890,7 +4906,7 @@
pSMB->ParameterCount = cpu_to_le16(params);
pSMB->TotalParameterCount = pSMB->ParameterCount;
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
parm_data->FileSize = cpu_to_le64(size);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4969,7 +4985,7 @@
cpu_to_le16(SMB_SET_FILE_END_OF_FILE_INFO);
}
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
if (rc) {
@@ -5037,7 +5053,7 @@
else
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_BASIC_INFO);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
memcpy(data_offset, data, sizeof(FILE_BASIC_INFO));
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
@@ -5096,7 +5112,7 @@
pSMB->Fid = fid;
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_DISPOSITION_INFO);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
*data_offset = delete_file ? 1 : 0;
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
@@ -5169,7 +5185,7 @@
else
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_BASIC_INFO);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
memcpy(data_offset, data, sizeof(FILE_BASIC_INFO));
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -5221,7 +5237,7 @@
}
pSMB->attr = cpu_to_le16(dos_attrs);
pSMB->BufferFormat = 0x04;
- pSMB->hdr.smb_buf_length += name_len + 1;
+ inc_rfc1001_len(pSMB, name_len + 1);
pSMB->ByteCount = cpu_to_le16(name_len + 1);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -5326,7 +5342,7 @@
pSMB->Fid = fid;
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
cifs_fill_unix_set_info(data_offset, args);
@@ -5402,7 +5418,7 @@
pSMB->TotalDataCount = pSMB->DataCount;
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
cifs_fill_unix_set_info(data_offset, args);
@@ -5418,79 +5434,6 @@
return rc;
}
-int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
- const int notify_subdirs, const __u16 netfid,
- __u32 filter, struct file *pfile, int multishot,
- const struct nls_table *nls_codepage)
-{
- int rc = 0;
- struct smb_com_transaction_change_notify_req *pSMB = NULL;
- struct smb_com_ntransaction_change_notify_rsp *pSMBr = NULL;
- struct dir_notify_req *dnotify_req;
- int bytes_returned;
-
- cFYI(1, "In CIFSSMBNotify for file handle %d", (int)netfid);
- rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
- (void **) &pSMBr);
- if (rc)
- return rc;
-
- pSMB->TotalParameterCount = 0 ;
- pSMB->TotalDataCount = 0;
- pSMB->MaxParameterCount = cpu_to_le32(2);
- /* BB find exact data count max from sess structure BB */
- pSMB->MaxDataCount = 0; /* same in little endian or be */
-/* BB VERIFY verify which is correct for above BB */
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
-
- pSMB->MaxSetupCount = 4;
- pSMB->Reserved = 0;
- pSMB->ParameterOffset = 0;
- pSMB->DataCount = 0;
- pSMB->DataOffset = 0;
- pSMB->SetupCount = 4; /* single byte does not need le conversion */
- pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_NOTIFY_CHANGE);
- pSMB->ParameterCount = pSMB->TotalParameterCount;
- if (notify_subdirs)
- pSMB->WatchTree = 1; /* one byte - no le conversion needed */
- pSMB->Reserved2 = 0;
- pSMB->CompletionFilter = cpu_to_le32(filter);
- pSMB->Fid = netfid; /* file handle always le */
- pSMB->ByteCount = 0;
-
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *)pSMBr, &bytes_returned,
- CIFS_ASYNC_OP);
- if (rc) {
- cFYI(1, "Error in Notify = %d", rc);
- } else {
- /* Add file to outstanding requests */
- /* BB change to kmem cache alloc */
- dnotify_req = kmalloc(
- sizeof(struct dir_notify_req),
- GFP_KERNEL);
- if (dnotify_req) {
- dnotify_req->Pid = pSMB->hdr.Pid;
- dnotify_req->PidHigh = pSMB->hdr.PidHigh;
- dnotify_req->Mid = pSMB->hdr.Mid;
- dnotify_req->Tid = pSMB->hdr.Tid;
- dnotify_req->Uid = pSMB->hdr.Uid;
- dnotify_req->netfid = netfid;
- dnotify_req->pfile = pfile;
- dnotify_req->filter = filter;
- dnotify_req->multishot = multishot;
- spin_lock(&GlobalMid_Lock);
- list_add_tail(&dnotify_req->lhead,
- &GlobalDnotifyReqList);
- spin_unlock(&GlobalMid_Lock);
- } else
- rc = -ENOMEM;
- }
- cifs_buf_release(pSMB);
- return rc;
-}
-
#ifdef CONFIG_CIFS_XATTR
/*
* Do a path-based QUERY_ALL_EAS call and parse the result. This is a common
@@ -5560,7 +5503,7 @@
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->InformationLevel = cpu_to_le16(SMB_INFO_QUERY_ALL_EAS);
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -5576,7 +5519,7 @@
of these trans2 responses */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 4)) {
+ if (rc || get_bcc(&pSMBr->hdr) < 4) {
rc = -EIO; /* bad smb */
goto QAllEAsOut;
}
@@ -5773,7 +5716,7 @@
pSMB->ParameterCount = cpu_to_le16(params);
pSMB->TotalParameterCount = pSMB->ParameterCount;
pSMB->Reserved4 = 0;
- pSMB->hdr.smb_buf_length += byte_count;
+ inc_rfc1001_len(pSMB, byte_count);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -5787,5 +5730,99 @@
return rc;
}
-
#endif
+
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* BB unused temporarily */
+/*
+ * Years ago the kernel added a "dnotify" function for Samba server,
+ * to allow network clients (such as Windows) to display updated
+ * lists of files in directory listings automatically when
+ * files are added by one user when another user has the
+ * same directory open on their desktop. The Linux cifs kernel
+ * client hooked into the kernel side of this interface for
+ * the same reason, but ironically when the VFS moved from
+ * "dnotify" to "inotify" it became harder to plug in Linux
+ * network file system clients (the most obvious use case
+ * for notify interfaces is when multiple users can update
+ * the contents of the same directory - exactly what network
+ * file systems can do) although the server (Samba) could
+ * still use it. For the short term we leave the worker
+ * function ifdeffed out (below) until inotify is fixed
+ * in the VFS to make it easier to plug in network file
+ * system clients. If inotify turns out to be permanently
+ * incompatible for network fs clients, we could instead simply
+ * expose this config flag by adding a future cifs (and smb2) notify ioctl.
+ */
+int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
+ const int notify_subdirs, const __u16 netfid,
+ __u32 filter, struct file *pfile, int multishot,
+ const struct nls_table *nls_codepage)
+{
+ int rc = 0;
+ struct smb_com_transaction_change_notify_req *pSMB = NULL;
+ struct smb_com_ntransaction_change_notify_rsp *pSMBr = NULL;
+ struct dir_notify_req *dnotify_req;
+ int bytes_returned;
+
+ cFYI(1, "In CIFSSMBNotify for file handle %d", (int)netfid);
+ rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
+ (void **) &pSMBr);
+ if (rc)
+ return rc;
+
+ pSMB->TotalParameterCount = 0 ;
+ pSMB->TotalDataCount = 0;
+ pSMB->MaxParameterCount = cpu_to_le32(2);
+ /* BB find exact data count max from sess structure BB */
+ pSMB->MaxDataCount = 0; /* same in little endian or be */
+/* BB VERIFY verify which is correct for above BB */
+ pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
+ MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+
+ pSMB->MaxSetupCount = 4;
+ pSMB->Reserved = 0;
+ pSMB->ParameterOffset = 0;
+ pSMB->DataCount = 0;
+ pSMB->DataOffset = 0;
+ pSMB->SetupCount = 4; /* single byte does not need le conversion */
+ pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_NOTIFY_CHANGE);
+ pSMB->ParameterCount = pSMB->TotalParameterCount;
+ if (notify_subdirs)
+ pSMB->WatchTree = 1; /* one byte - no le conversion needed */
+ pSMB->Reserved2 = 0;
+ pSMB->CompletionFilter = cpu_to_le32(filter);
+ pSMB->Fid = netfid; /* file handle always le */
+ pSMB->ByteCount = 0;
+
+ rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+ (struct smb_hdr *)pSMBr, &bytes_returned,
+ CIFS_ASYNC_OP);
+ if (rc) {
+ cFYI(1, "Error in Notify = %d", rc);
+ } else {
+ /* Add file to outstanding requests */
+ /* BB change to kmem cache alloc */
+ dnotify_req = kmalloc(
+ sizeof(struct dir_notify_req),
+ GFP_KERNEL);
+ if (dnotify_req) {
+ dnotify_req->Pid = pSMB->hdr.Pid;
+ dnotify_req->PidHigh = pSMB->hdr.PidHigh;
+ dnotify_req->Mid = pSMB->hdr.Mid;
+ dnotify_req->Tid = pSMB->hdr.Tid;
+ dnotify_req->Uid = pSMB->hdr.Uid;
+ dnotify_req->netfid = netfid;
+ dnotify_req->pfile = pfile;
+ dnotify_req->filter = filter;
+ dnotify_req->multishot = multishot;
+ spin_lock(&GlobalMid_Lock);
+ list_add_tail(&dnotify_req->lhead,
+ &GlobalDnotifyReqList);
+ spin_unlock(&GlobalMid_Lock);
+ } else
+ rc = -ENOMEM;
+ }
+ cifs_buf_release(pSMB);
+ return rc;
+}
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4bc862a..da284e3 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -102,6 +102,7 @@
bool fsc:1; /* enable fscache */
bool mfsymlinks:1; /* use Minshall+French Symlinks */
bool multiuser:1;
+ bool use_smb2:1; /* force smb2 use on mount instead of cifs */
unsigned int rsize;
unsigned int wsize;
bool sockopt_tcp_nodelay:1;
@@ -274,7 +275,8 @@
char *data_area_of_target;
char *data_area_of_buf2;
int remaining;
- __u16 byte_count, total_data_size, total_in_buf, total_in_buf2;
+ unsigned int byte_count, total_in_buf;
+ __u16 total_data_size, total_in_buf2;
total_data_size = get_unaligned_le16(&pSMBt->t2_rsp.TotalDataCount);
@@ -287,7 +289,7 @@
remaining = total_data_size - total_in_buf;
if (remaining < 0)
- return -EINVAL;
+ return -EPROTO;
if (remaining == 0) /* nothing to do, ignore */
return 0;
@@ -308,19 +310,28 @@
data_area_of_target += total_in_buf;
/* copy second buffer into end of first buffer */
- memcpy(data_area_of_target, data_area_of_buf2, total_in_buf2);
total_in_buf += total_in_buf2;
+ /* is the result too big for the field? */
+ if (total_in_buf > USHRT_MAX)
+ return -EPROTO;
put_unaligned_le16(total_in_buf, &pSMBt->t2_rsp.DataCount);
- byte_count = get_bcc_le(pTargetSMB);
+
+ /* fix up the BCC */
+ byte_count = get_bcc(pTargetSMB);
byte_count += total_in_buf2;
- put_bcc_le(byte_count, pTargetSMB);
+ /* is the result too big for the field? */
+ if (byte_count > USHRT_MAX)
+ return -EPROTO;
+ put_bcc(byte_count, pTargetSMB);
- byte_count = pTargetSMB->smb_buf_length;
+ byte_count = be32_to_cpu(pTargetSMB->smb_buf_length);
byte_count += total_in_buf2;
+ /* don't allow buffer to overflow */
+ if (byte_count > CIFSMaxBufSize)
+ return -ENOBUFS;
+ pTargetSMB->smb_buf_length = cpu_to_be32(byte_count);
- /* BB also add check that we are not beyond maximum buffer size */
-
- pTargetSMB->smb_buf_length = byte_count;
+ memcpy(data_area_of_target, data_area_of_buf2, total_in_buf2);
if (remaining == total_in_buf2) {
cFYI(1, "found the last secondary response");
@@ -485,8 +496,7 @@
/* Note that FC 1001 length is big endian on the wire,
but we convert it here so it is always manipulated
as host byte order */
- pdu_length = be32_to_cpu((__force __be32)smb_buffer->smb_buf_length);
- smb_buffer->smb_buf_length = pdu_length;
+ pdu_length = be32_to_cpu(smb_buffer->smb_buf_length);
cFYI(1, "rfc1002 length 0x%x", pdu_length+4);
@@ -607,59 +617,63 @@
list_for_each_safe(tmp, tmp2, &server->pending_mid_q) {
mid_entry = list_entry(tmp, struct mid_q_entry, qhead);
- if ((mid_entry->mid == smb_buffer->Mid) &&
- (mid_entry->midState == MID_REQUEST_SUBMITTED) &&
- (mid_entry->command == smb_buffer->Command)) {
- if (length == 0 &&
- check2ndT2(smb_buffer, server->maxBuf) > 0) {
- /* We have a multipart transact2 resp */
- isMultiRsp = true;
- if (mid_entry->resp_buf) {
- /* merge response - fix up 1st*/
- if (coalesce_t2(smb_buffer,
- mid_entry->resp_buf)) {
- mid_entry->multiRsp =
- true;
- break;
- } else {
- /* all parts received */
- mid_entry->multiEnd =
- true;
- goto multi_t2_fnd;
- }
+ if (mid_entry->mid != smb_buffer->Mid ||
+ mid_entry->midState != MID_REQUEST_SUBMITTED ||
+ mid_entry->command != smb_buffer->Command) {
+ mid_entry = NULL;
+ continue;
+ }
+
+ if (length == 0 &&
+ check2ndT2(smb_buffer, server->maxBuf) > 0) {
+ /* We have a multipart transact2 resp */
+ isMultiRsp = true;
+ if (mid_entry->resp_buf) {
+ /* merge response - fix up 1st*/
+ length = coalesce_t2(smb_buffer,
+ mid_entry->resp_buf);
+ if (length > 0) {
+ length = 0;
+ mid_entry->multiRsp = true;
+ break;
} else {
- if (!isLargeBuf) {
- cERROR(1, "1st trans2 resp needs bigbuf");
- /* BB maybe we can fix this up, switch
- to already allocated large buffer? */
- } else {
- /* Have first buffer */
- mid_entry->resp_buf =
- smb_buffer;
- mid_entry->largeBuf =
- true;
- bigbuf = NULL;
- }
+ /* all parts received or
+ * packet is malformed
+ */
+ mid_entry->multiEnd = true;
+ goto multi_t2_fnd;
}
- break;
+ } else {
+ if (!isLargeBuf) {
+ /*
+ * FIXME: switch to already
+ * allocated largebuf?
+ */
+ cERROR(1, "1st trans2 resp "
+ "needs bigbuf");
+ } else {
+ /* Have first buffer */
+ mid_entry->resp_buf =
+ smb_buffer;
+ mid_entry->largeBuf = true;
+ bigbuf = NULL;
+ }
}
- mid_entry->resp_buf = smb_buffer;
- mid_entry->largeBuf = isLargeBuf;
-multi_t2_fnd:
- if (length == 0)
- mid_entry->midState =
- MID_RESPONSE_RECEIVED;
- else
- mid_entry->midState =
- MID_RESPONSE_MALFORMED;
-#ifdef CONFIG_CIFS_STATS2
- mid_entry->when_received = jiffies;
-#endif
- list_del_init(&mid_entry->qhead);
- mid_entry->callback(mid_entry);
break;
}
- mid_entry = NULL;
+ mid_entry->resp_buf = smb_buffer;
+ mid_entry->largeBuf = isLargeBuf;
+multi_t2_fnd:
+ if (length == 0)
+ mid_entry->midState = MID_RESPONSE_RECEIVED;
+ else
+ mid_entry->midState = MID_RESPONSE_MALFORMED;
+#ifdef CONFIG_CIFS_STATS2
+ mid_entry->when_received = jiffies;
+#endif
+ list_del_init(&mid_entry->qhead);
+ mid_entry->callback(mid_entry);
+ break;
}
spin_unlock(&GlobalMid_Lock);
@@ -721,7 +735,7 @@
sock_release(csocket);
server->ssocket = NULL;
}
- /* buffer usuallly freed in free_mid - need to free it here on exit */
+ /* buffer usually freed in free_mid - need to free it here on exit */
cifs_buf_release(bigbuf);
if (smallbuf) /* no sense logging a debug message if NULL */
cifs_small_buf_release(smallbuf);
@@ -804,10 +818,11 @@
}
static int
-cifs_parse_mount_options(char *options, const char *devname,
+cifs_parse_mount_options(const char *mountdata, const char *devname,
struct smb_vol *vol)
{
char *value, *data, *end;
+ char *mountdata_copy, *options;
unsigned int temp_len, i, j;
char separator[2];
short int override_uid = -1;
@@ -847,9 +862,14 @@
vol->actimeo = CIFS_DEF_ACTIMEO;
- if (!options)
- return 1;
+ if (!mountdata)
+ goto cifs_parse_mount_err;
+ mountdata_copy = kstrndup(mountdata, PAGE_SIZE, GFP_KERNEL);
+ if (!mountdata_copy)
+ goto cifs_parse_mount_err;
+
+ options = mountdata_copy;
end = options + strlen(options);
if (strncmp(options, "sep=", 4) == 0) {
if (options[4] != 0) {
@@ -875,17 +895,22 @@
if (!value) {
printk(KERN_WARNING
"CIFS: invalid or missing username\n");
- return 1; /* needs_arg; */
+ goto cifs_parse_mount_err;
} else if (!*value) {
/* null user, ie anonymous, authentication */
vol->nullauth = 1;
}
if (strnlen(value, MAX_USERNAME_SIZE) <
MAX_USERNAME_SIZE) {
- vol->username = value;
+ vol->username = kstrdup(value, GFP_KERNEL);
+ if (!vol->username) {
+ printk(KERN_WARNING "CIFS: no memory "
+ "for username\n");
+ goto cifs_parse_mount_err;
+ }
} else {
printk(KERN_WARNING "CIFS: username too long\n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else if (strnicmp(data, "pass", 4) == 0) {
if (!value) {
@@ -949,7 +974,7 @@
if (vol->password == NULL) {
printk(KERN_WARNING "CIFS: no memory "
"for password\n");
- return 1;
+ goto cifs_parse_mount_err;
}
for (i = 0, j = 0; i < temp_len; i++, j++) {
vol->password[j] = value[i];
@@ -965,7 +990,7 @@
if (vol->password == NULL) {
printk(KERN_WARNING "CIFS: no memory "
"for password\n");
- return 1;
+ goto cifs_parse_mount_err;
}
strcpy(vol->password, value);
}
@@ -975,11 +1000,16 @@
vol->UNCip = NULL;
} else if (strnlen(value, INET6_ADDRSTRLEN) <
INET6_ADDRSTRLEN) {
- vol->UNCip = value;
+ vol->UNCip = kstrdup(value, GFP_KERNEL);
+ if (!vol->UNCip) {
+ printk(KERN_WARNING "CIFS: no memory "
+ "for UNC IP\n");
+ goto cifs_parse_mount_err;
+ }
} else {
printk(KERN_WARNING "CIFS: ip address "
"too long\n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else if (strnicmp(data, "sec", 3) == 0) {
if (!value || !*value) {
@@ -992,7 +1022,7 @@
/* vol->secFlg |= CIFSSEC_MUST_SEAL |
CIFSSEC_MAY_KRB5; */
cERROR(1, "Krb5 cifs privacy not supported");
- return 1;
+ goto cifs_parse_mount_err;
} else if (strnicmp(value, "krb5", 4) == 0) {
vol->secFlg |= CIFSSEC_MAY_KRB5;
} else if (strnicmp(value, "ntlmsspi", 8) == 0) {
@@ -1022,7 +1052,23 @@
vol->nullauth = 1;
} else {
cERROR(1, "bad security option: %s", value);
- return 1;
+ goto cifs_parse_mount_err;
+ }
+ } else if (strnicmp(data, "vers", 3) == 0) {
+ if (!value || !*value) {
+ cERROR(1, "no protocol version specified"
+ " after vers= mount option");
+ } else if ((strnicmp(value, "cifs", 4) == 0) ||
+ (strnicmp(value, "1", 1) == 0)) {
+ /* this is the default */
+ continue;
+ } else if ((strnicmp(value, "smb2", 4) == 0) ||
+ (strnicmp(value, "2", 1) == 0)) {
+#ifdef CONFIG_CIFS_SMB2
+ vol->use_smb2 = true;
+#else
+ cERROR(1, "smb2 support not enabled");
+#endif /* CONFIG_CIFS_SMB2 */
}
} else if ((strnicmp(data, "unc", 3) == 0)
|| (strnicmp(data, "target", 6) == 0)
@@ -1030,12 +1076,12 @@
if (!value || !*value) {
printk(KERN_WARNING "CIFS: invalid path to "
"network resource\n");
- return 1; /* needs_arg; */
+ goto cifs_parse_mount_err;
}
if ((temp_len = strnlen(value, 300)) < 300) {
vol->UNC = kmalloc(temp_len+1, GFP_KERNEL);
if (vol->UNC == NULL)
- return 1;
+ goto cifs_parse_mount_err;
strcpy(vol->UNC, value);
if (strncmp(vol->UNC, "//", 2) == 0) {
vol->UNC[0] = '\\';
@@ -1044,27 +1090,32 @@
printk(KERN_WARNING
"CIFS: UNC Path does not begin "
"with // or \\\\ \n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else {
printk(KERN_WARNING "CIFS: UNC name too long\n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else if ((strnicmp(data, "domain", 3) == 0)
|| (strnicmp(data, "workgroup", 5) == 0)) {
if (!value || !*value) {
printk(KERN_WARNING "CIFS: invalid domain name\n");
- return 1; /* needs_arg; */
+ goto cifs_parse_mount_err;
}
/* BB are there cases in which a comma can be valid in
a domain name and need special handling? */
if (strnlen(value, 256) < 256) {
- vol->domainname = value;
+ vol->domainname = kstrdup(value, GFP_KERNEL);
+ if (!vol->domainname) {
+ printk(KERN_WARNING "CIFS: no memory "
+ "for domainname\n");
+ goto cifs_parse_mount_err;
+ }
cFYI(1, "Domain name set");
} else {
printk(KERN_WARNING "CIFS: domain name too "
"long\n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else if (strnicmp(data, "srcaddr", 7) == 0) {
vol->srcaddr.ss_family = AF_UNSPEC;
@@ -1072,7 +1123,7 @@
if (!value || !*value) {
printk(KERN_WARNING "CIFS: srcaddr value"
" not specified.\n");
- return 1; /* needs_arg; */
+ goto cifs_parse_mount_err;
}
i = cifs_convert_address((struct sockaddr *)&vol->srcaddr,
value, strlen(value));
@@ -1080,20 +1131,20 @@
printk(KERN_WARNING "CIFS: Could not parse"
" srcaddr: %s\n",
value);
- return 1;
+ goto cifs_parse_mount_err;
}
} else if (strnicmp(data, "prefixpath", 10) == 0) {
if (!value || !*value) {
printk(KERN_WARNING
"CIFS: invalid path prefix\n");
- return 1; /* needs_argument */
+ goto cifs_parse_mount_err;
}
if ((temp_len = strnlen(value, 1024)) < 1024) {
if (value[0] != '/')
temp_len++; /* missing leading slash */
vol->prepath = kmalloc(temp_len+1, GFP_KERNEL);
if (vol->prepath == NULL)
- return 1;
+ goto cifs_parse_mount_err;
if (value[0] != '/') {
vol->prepath[0] = '/';
strcpy(vol->prepath+1, value);
@@ -1102,24 +1153,33 @@
cFYI(1, "prefix path %s", vol->prepath);
} else {
printk(KERN_WARNING "CIFS: prefix too long\n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else if (strnicmp(data, "iocharset", 9) == 0) {
if (!value || !*value) {
printk(KERN_WARNING "CIFS: invalid iocharset "
"specified\n");
- return 1; /* needs_arg; */
+ goto cifs_parse_mount_err;
}
if (strnlen(value, 65) < 65) {
- if (strnicmp(value, "default", 7))
- vol->iocharset = value;
+ if (strnicmp(value, "default", 7)) {
+ vol->iocharset = kstrdup(value,
+ GFP_KERNEL);
+
+ if (!vol->iocharset) {
+ printk(KERN_WARNING "CIFS: no "
+ "memory for"
+ "charset\n");
+ goto cifs_parse_mount_err;
+ }
+ }
/* if iocharset not set then load_nls_default
is used by caller */
cFYI(1, "iocharset set to %s", value);
} else {
printk(KERN_WARNING "CIFS: iocharset name "
"too long.\n");
- return 1;
+ goto cifs_parse_mount_err;
}
} else if (!strnicmp(data, "uid", 3) && value && *value) {
vol->linux_uid = simple_strtoul(value, &value, 0);
@@ -1232,7 +1292,7 @@
if (vol->actimeo > CIFS_MAX_ACTIMEO) {
cERROR(1, "CIFS: attribute cache"
"timeout too large");
- return 1;
+ goto cifs_parse_mount_err;
}
}
} else if (strnicmp(data, "credentials", 4) == 0) {
@@ -1376,7 +1436,7 @@
#ifndef CONFIG_CIFS_FSCACHE
cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
"kernel config option set");
- return 1;
+ goto cifs_parse_mount_err;
#endif
vol->fsc = true;
} else if (strnicmp(data, "mfsymlinks", 10) == 0) {
@@ -1391,12 +1451,12 @@
if (devname == NULL) {
printk(KERN_WARNING "CIFS: Missing UNC name for mount "
"target\n");
- return 1;
+ goto cifs_parse_mount_err;
}
if ((temp_len = strnlen(devname, 300)) < 300) {
vol->UNC = kmalloc(temp_len+1, GFP_KERNEL);
if (vol->UNC == NULL)
- return 1;
+ goto cifs_parse_mount_err;
strcpy(vol->UNC, devname);
if (strncmp(vol->UNC, "//", 2) == 0) {
vol->UNC[0] = '\\';
@@ -1404,21 +1464,21 @@
} else if (strncmp(vol->UNC, "\\\\", 2) != 0) {
printk(KERN_WARNING "CIFS: UNC Path does not "
"begin with // or \\\\ \n");
- return 1;
+ goto cifs_parse_mount_err;
}
value = strpbrk(vol->UNC+2, "/\\");
if (value)
*value = '\\';
} else {
printk(KERN_WARNING "CIFS: UNC name too long\n");
- return 1;
+ goto cifs_parse_mount_err;
}
}
if (vol->multiuser && !(vol->secFlg & CIFSSEC_MAY_KRB5)) {
cERROR(1, "Multiuser mounts currently require krb5 "
"authentication!");
- return 1;
+ goto cifs_parse_mount_err;
}
if (vol->UNCip == NULL)
@@ -1436,7 +1496,12 @@
printk(KERN_NOTICE "CIFS: ignoring forcegid mount option "
"specified with no gid= option.\n");
+ kfree(mountdata_copy);
return 0;
+
+cifs_parse_mount_err:
+ kfree(mountdata_copy);
+ return 1;
}
/** Returns true if srcaddr isn't specified and rhs isn't
@@ -2266,7 +2331,7 @@
smb_buf = (struct smb_hdr *)ses_init_buf;
/* sizeof RFC1002_SESSION_REQUEST with no scope */
- smb_buf->smb_buf_length = 0x81000044;
+ smb_buf->smb_buf_length = cpu_to_be32(0x81000044);
rc = smb_send(server, smb_buf, 0x44);
kfree(ses_init_buf);
/*
@@ -2659,6 +2724,11 @@
0 /* not legacy */, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+ if (rc == -EOPNOTSUPP || rc == -EINVAL)
+ rc = SMBQueryInformation(xid, tcon, full_path, pfile_info,
+ cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
kfree(pfile_info);
return rc;
}
@@ -2672,8 +2742,12 @@
return;
volume_info = *pvolume_info;
+ kfree(volume_info->username);
kzfree(volume_info->password);
kfree(volume_info->UNC);
+ kfree(volume_info->UNCip);
+ kfree(volume_info->domainname);
+ kfree(volume_info->iocharset);
kfree(volume_info->prepath);
kfree(volume_info);
*pvolume_info = NULL;
@@ -2710,11 +2784,65 @@
full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
return full_path;
}
+
+/*
+ * Perform a dfs referral query for a share and (optionally) prefix
+ *
+ * If a referral is found, cifs_sb->mountdata will be (re-)allocated
+ * to a string containing updated options for the submount. Otherwise it
+ * will be left untouched.
+ *
+ * Returns the rc from get_dfs_path to the caller, which can be used to
+ * determine whether there were referrals.
+ */
+static int
+expand_dfs_referral(int xid, struct cifsSesInfo *pSesInfo,
+ struct smb_vol *volume_info, struct cifs_sb_info *cifs_sb,
+ int check_prefix)
+{
+ int rc;
+ unsigned int num_referrals = 0;
+ struct dfs_info3_param *referrals = NULL;
+ char *full_path = NULL, *ref_path = NULL, *mdata = NULL;
+
+ full_path = build_unc_path_to_root(volume_info, cifs_sb);
+ if (IS_ERR(full_path))
+ return PTR_ERR(full_path);
+
+ /* For DFS paths, skip the first '\' of the UNC */
+ ref_path = check_prefix ? full_path + 1 : volume_info->UNC + 1;
+
+ rc = get_dfs_path(xid, pSesInfo , ref_path, cifs_sb->local_nls,
+ &num_referrals, &referrals,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+ if (!rc && num_referrals > 0) {
+ char *fake_devname = NULL;
+
+ mdata = cifs_compose_mount_options(cifs_sb->mountdata,
+ full_path + 1, referrals,
+ &fake_devname);
+
+ free_dfs_info_array(referrals, num_referrals);
+ kfree(fake_devname);
+
+ if (cifs_sb->mountdata != NULL)
+ kfree(cifs_sb->mountdata);
+
+ if (IS_ERR(mdata)) {
+ rc = PTR_ERR(mdata);
+ mdata = NULL;
+ }
+ cifs_sb->mountdata = mdata;
+ }
+ kfree(full_path);
+ return rc;
+}
#endif
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
- char *mount_data_global, const char *devname)
+ const char *devname)
{
int rc;
int xid;
@@ -2723,13 +2851,20 @@
struct cifsTconInfo *tcon;
struct TCP_Server_Info *srvTcp;
char *full_path;
- char *mount_data = mount_data_global;
struct tcon_link *tlink;
#ifdef CONFIG_CIFS_DFS_UPCALL
- struct dfs_info3_param *referrals = NULL;
- unsigned int num_referrals = 0;
int referral_walks_count = 0;
try_mount_again:
+ /* cleanup activities if we're chasing a referral */
+ if (referral_walks_count) {
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+
+ cleanup_volume_info(&volume_info);
+ FreeXid(xid);
+ }
#endif
rc = 0;
tcon = NULL;
@@ -2746,7 +2881,8 @@
goto out;
}
- if (cifs_parse_mount_options(mount_data, devname, volume_info)) {
+ if (cifs_parse_mount_options(cifs_sb->mountdata, devname,
+ volume_info)) {
rc = -EINVAL;
goto out;
}
@@ -2842,6 +2978,24 @@
(tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
remote_path_check:
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ /*
+ * Perform an unconditional check for whether there are DFS
+ * referrals for this path without prefix, to provide support
+ * for DFS referrals from w2k8 servers which don't seem to respond
+ * with PATH_NOT_COVERED to requests that include the prefix.
+ * Chase the referral if found, otherwise continue normally.
+ */
+ if (referral_walks_count == 0) {
+ int refrc = expand_dfs_referral(xid, pSesInfo, volume_info,
+ cifs_sb, false);
+ if (!refrc) {
+ referral_walks_count++;
+ goto try_mount_again;
+ }
+ }
+#endif
+
/* check if a whole path (including prepath) is not remote */
if (!rc && tcon) {
/* build_path_to_root works only when we have a valid tcon */
@@ -2875,46 +3029,15 @@
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
convert_delimiter(cifs_sb->prepath,
CIFS_DIR_SEP(cifs_sb));
- full_path = build_unc_path_to_root(volume_info, cifs_sb);
- if (IS_ERR(full_path)) {
- rc = PTR_ERR(full_path);
- goto mount_fail_check;
- }
- cFYI(1, "Getting referral for: %s", full_path);
- rc = get_dfs_path(xid, pSesInfo , full_path + 1,
- cifs_sb->local_nls, &num_referrals, &referrals,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (!rc && num_referrals > 0) {
- char *fake_devname = NULL;
+ rc = expand_dfs_referral(xid, pSesInfo, volume_info, cifs_sb,
+ true);
- if (mount_data != mount_data_global)
- kfree(mount_data);
-
- mount_data = cifs_compose_mount_options(
- cifs_sb->mountdata, full_path + 1,
- referrals, &fake_devname);
-
- free_dfs_info_array(referrals, num_referrals);
- kfree(fake_devname);
- kfree(full_path);
-
- if (IS_ERR(mount_data)) {
- rc = PTR_ERR(mount_data);
- mount_data = NULL;
- goto mount_fail_check;
- }
-
- if (tcon)
- cifs_put_tcon(tcon);
- else if (pSesInfo)
- cifs_put_smb_ses(pSesInfo);
-
- cleanup_volume_info(&volume_info);
+ if (!rc) {
referral_walks_count++;
- FreeXid(xid);
goto try_mount_again;
}
+ goto mount_fail_check;
#else /* No DFS support, return error on mount */
rc = -EOPNOTSUPP;
#endif
@@ -2947,8 +3070,6 @@
mount_fail_check:
/* on error free sesinfo and tcon struct if needed */
if (rc) {
- if (mount_data != mount_data_global)
- kfree(mount_data);
/* If find_unc succeeded then rc == 0 so we can not end */
/* up accidentally freeing someone elses tcon struct */
if (tcon)
@@ -3064,7 +3185,8 @@
bcc_ptr += strlen("?????");
bcc_ptr += 1;
count = bcc_ptr - &pSMB->Password[0];
- pSMB->hdr.smb_buf_length += count;
+ pSMB->hdr.smb_buf_length = cpu_to_be32(be32_to_cpu(
+ pSMB->hdr.smb_buf_length) + count);
pSMB->ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
@@ -3239,7 +3361,9 @@
struct cifsSesInfo *ses;
struct cifsTconInfo *tcon = NULL;
struct smb_vol *vol_info;
- char username[MAX_USERNAME_SIZE + 1];
+ char username[28]; /* big enough for "krb50x" + hex of ULONG_MAX 6+16 */
+ /* We used to have this as MAX_USERNAME which is */
+ /* way too big now (256 instead of 32) */
vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL);
if (vol_info == NULL) {
diff --git a/fs/cifs/export.c b/fs/cifs/export.c
index 993f820..55d87ac 100644
--- a/fs/cifs/export.c
+++ b/fs/cifs/export.c
@@ -45,7 +45,7 @@
#include "cifs_debug.h"
#include "cifsfs.h"
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CIFS_NFSD_EXPORT
static struct dentry *cifs_get_parent(struct dentry *dentry)
{
/* BB need to add code here eventually to enable export via NFSD */
@@ -63,5 +63,5 @@
.encode_fs = */
};
-#endif /* EXPERIMENTAL */
+#endif /* CIFS_NFSD_EXPORT */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index faf5952..c672afe 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -857,95 +857,6 @@
cifsi->server_eof = end_of_write;
}
-ssize_t cifs_user_write(struct file *file, const char __user *write_data,
- size_t write_size, loff_t *poffset)
-{
- struct inode *inode = file->f_path.dentry->d_inode;
- int rc = 0;
- unsigned int bytes_written = 0;
- unsigned int total_written;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
- int xid;
- struct cifsFileInfo *open_file;
- struct cifsInodeInfo *cifsi = CIFS_I(inode);
-
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
-
- /* cFYI(1, " write %d bytes to offset %lld of %s", write_size,
- *poffset, file->f_path.dentry->d_name.name); */
-
- if (file->private_data == NULL)
- return -EBADF;
-
- open_file = file->private_data;
- pTcon = tlink_tcon(open_file->tlink);
-
- rc = generic_write_checks(file, poffset, &write_size, 0);
- if (rc)
- return rc;
-
- xid = GetXid();
-
- for (total_written = 0; write_size > total_written;
- total_written += bytes_written) {
- rc = -EAGAIN;
- while (rc == -EAGAIN) {
- if (file->private_data == NULL) {
- /* file has been closed on us */
- FreeXid(xid);
- /* if we have gotten here we have written some data
- and blocked, and the file has been freed on us while
- we blocked so return what we managed to write */
- return total_written;
- }
- if (open_file->invalidHandle) {
- /* we could deadlock if we called
- filemap_fdatawait from here so tell
- reopen_file not to flush data to server
- now */
- rc = cifs_reopen_file(open_file, false);
- if (rc != 0)
- break;
- }
-
- rc = CIFSSMBWrite(xid, pTcon,
- open_file->netfid,
- min_t(const int, cifs_sb->wsize,
- write_size - total_written),
- *poffset, &bytes_written,
- NULL, write_data + total_written, 0);
- }
- if (rc || (bytes_written == 0)) {
- if (total_written)
- break;
- else {
- FreeXid(xid);
- return rc;
- }
- } else {
- cifs_update_eof(cifsi, *poffset, bytes_written);
- *poffset += bytes_written;
- }
- }
-
- cifs_stats_bytes_written(pTcon, total_written);
-
-/* Do not update local mtime - server will set its actual value on write
- * inode->i_ctime = inode->i_mtime =
- * current_fs_time(inode->i_sb);*/
- if (total_written > 0) {
- spin_lock(&inode->i_lock);
- if (*poffset > inode->i_size)
- i_size_write(inode, *poffset);
- spin_unlock(&inode->i_lock);
- }
- mark_inode_dirty_sync(inode);
-
- FreeXid(xid);
- return total_written;
-}
-
static ssize_t cifs_write(struct cifsFileInfo *open_file,
const char *write_data, size_t write_size,
loff_t *poffset)
@@ -1420,9 +1331,10 @@
return rc;
}
-static int cifs_writepage(struct page *page, struct writeback_control *wbc)
+static int
+cifs_writepage_locked(struct page *page, struct writeback_control *wbc)
{
- int rc = -EFAULT;
+ int rc;
int xid;
xid = GetXid();
@@ -1442,15 +1354,29 @@
* to fail to update with the state of the page correctly.
*/
set_page_writeback(page);
+retry_write:
rc = cifs_partialpagewrite(page, 0, PAGE_CACHE_SIZE);
- SetPageUptodate(page); /* BB add check for error and Clearuptodate? */
- unlock_page(page);
+ if (rc == -EAGAIN && wbc->sync_mode == WB_SYNC_ALL)
+ goto retry_write;
+ else if (rc == -EAGAIN)
+ redirty_page_for_writepage(wbc, page);
+ else if (rc != 0)
+ SetPageError(page);
+ else
+ SetPageUptodate(page);
end_page_writeback(page);
page_cache_release(page);
FreeXid(xid);
return rc;
}
+static int cifs_writepage(struct page *page, struct writeback_control *wbc)
+{
+ int rc = cifs_writepage_locked(page, wbc);
+ unlock_page(page);
+ return rc;
+}
+
static int cifs_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
@@ -1519,8 +1445,13 @@
cFYI(1, "Sync file - name: %s datasync: 0x%x",
file->f_path.dentry->d_name.name, datasync);
- if (!CIFS_I(inode)->clientCanCacheRead)
- cifs_invalidate_mapping(inode);
+ if (!CIFS_I(inode)->clientCanCacheRead) {
+ rc = cifs_invalidate_mapping(inode);
+ if (rc) {
+ cFYI(1, "rc: %d during invalidate phase", rc);
+ rc = 0; /* don't care about it in fsync */
+ }
+ }
tcon = tlink_tcon(smbfile->tlink);
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOSSYNC))
@@ -1726,7 +1657,7 @@
return total_written;
}
-static ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov,
+ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
ssize_t written;
@@ -1849,17 +1780,7 @@
return total_read;
}
-ssize_t cifs_user_read(struct file *file, char __user *read_data,
- size_t read_size, loff_t *poffset)
-{
- struct iovec iov;
- iov.iov_base = read_data;
- iov.iov_len = read_size;
-
- return cifs_iovec_read(file, &iov, 1, poffset);
-}
-
-static ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
+ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
ssize_t read;
@@ -1987,8 +1908,11 @@
xid = GetXid();
- if (!CIFS_I(inode)->clientCanCacheRead)
- cifs_invalidate_mapping(inode);
+ if (!CIFS_I(inode)->clientCanCacheRead) {
+ rc = cifs_invalidate_mapping(inode);
+ if (rc)
+ return rc;
+ }
rc = generic_file_mmap(file, vma);
if (rc == 0)
@@ -2415,6 +2339,27 @@
cifs_fscache_invalidate_page(page, &cifsi->vfs_inode);
}
+static int cifs_launder_page(struct page *page)
+{
+ int rc = 0;
+ loff_t range_start = page_offset(page);
+ loff_t range_end = range_start + (loff_t)(PAGE_CACHE_SIZE - 1);
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL,
+ .nr_to_write = 0,
+ .range_start = range_start,
+ .range_end = range_end,
+ };
+
+ cFYI(1, "Launder page: %p", page);
+
+ if (clear_page_dirty_for_io(page))
+ rc = cifs_writepage_locked(page, &wbc);
+
+ cifs_fscache_invalidate_page(page, page->mapping->host);
+ return rc;
+}
+
void cifs_oplock_break(struct work_struct *work)
{
struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
@@ -2486,7 +2431,7 @@
.set_page_dirty = __set_page_dirty_nobuffers,
.releasepage = cifs_release_page,
.invalidatepage = cifs_invalidate_page,
- /* .direct_IO = */
+ .launder_page = cifs_launder_page,
};
/*
@@ -2503,5 +2448,5 @@
.set_page_dirty = __set_page_dirty_nobuffers,
.releasepage = cifs_release_page,
.invalidatepage = cifs_invalidate_page,
- /* .direct_IO = */
+ .launder_page = cifs_launder_page,
};
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 8852470..de02ed5 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -878,7 +878,7 @@
}
/* gets root inode */
-struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
+struct inode *cifs_root_iget(struct super_block *sb)
{
int xid;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -1683,71 +1683,70 @@
/*
* Zap the cache. Called when invalid_mapping flag is set.
*/
-void
+int
cifs_invalidate_mapping(struct inode *inode)
{
- int rc;
+ int rc = 0;
struct cifsInodeInfo *cifs_i = CIFS_I(inode);
cifs_i->invalid_mapping = false;
- /* write back any cached data */
if (inode->i_mapping && inode->i_mapping->nrpages != 0) {
- rc = filemap_write_and_wait(inode->i_mapping);
- mapping_set_error(inode->i_mapping, rc);
+ rc = invalidate_inode_pages2(inode->i_mapping);
+ if (rc) {
+ cERROR(1, "%s: could not invalidate inode %p", __func__,
+ inode);
+ cifs_i->invalid_mapping = true;
+ }
}
- invalidate_remote_inode(inode);
+
cifs_fscache_reset_inode_cookie(inode);
+ return rc;
}
-int cifs_revalidate_file(struct file *filp)
+int cifs_revalidate_file_attr(struct file *filp)
{
int rc = 0;
struct inode *inode = filp->f_path.dentry->d_inode;
struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
if (!cifs_inode_needs_reval(inode))
- goto check_inval;
+ return rc;
if (tlink_tcon(cfile->tlink)->unix_ext)
rc = cifs_get_file_info_unix(filp);
else
rc = cifs_get_file_info(filp);
-check_inval:
- if (CIFS_I(inode)->invalid_mapping)
- cifs_invalidate_mapping(inode);
-
return rc;
}
-/* revalidate a dentry's inode attributes */
-int cifs_revalidate_dentry(struct dentry *dentry)
+int cifs_revalidate_dentry_attr(struct dentry *dentry)
{
int xid;
int rc = 0;
- char *full_path = NULL;
struct inode *inode = dentry->d_inode;
struct super_block *sb = dentry->d_sb;
+ char *full_path = NULL;
if (inode == NULL)
return -ENOENT;
- xid = GetXid();
-
if (!cifs_inode_needs_reval(inode))
- goto check_inval;
+ return rc;
+
+ xid = GetXid();
/* can not safely grab the rename sem here if rename calls revalidate
since that would deadlock */
full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
rc = -ENOMEM;
- goto check_inval;
+ goto out;
}
- cFYI(1, "Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
- "jiffies %ld", full_path, inode, inode->i_count.counter,
+ cFYI(1, "Update attributes: %s inode 0x%p count %d dentry: 0x%p d_time "
+ "%ld jiffies %ld", full_path, inode, inode->i_count.counter,
dentry, dentry->d_time, jiffies);
if (cifs_sb_master_tcon(CIFS_SB(sb))->unix_ext)
@@ -1756,41 +1755,83 @@
rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
xid, NULL);
-check_inval:
- if (CIFS_I(inode)->invalid_mapping)
- cifs_invalidate_mapping(inode);
-
+out:
kfree(full_path);
FreeXid(xid);
return rc;
}
+int cifs_revalidate_file(struct file *filp)
+{
+ int rc;
+ struct inode *inode = filp->f_path.dentry->d_inode;
+
+ rc = cifs_revalidate_file_attr(filp);
+ if (rc)
+ return rc;
+
+ if (CIFS_I(inode)->invalid_mapping)
+ rc = cifs_invalidate_mapping(inode);
+ return rc;
+}
+
+/* revalidate a dentry's inode attributes */
+int cifs_revalidate_dentry(struct dentry *dentry)
+{
+ int rc;
+ struct inode *inode = dentry->d_inode;
+
+ rc = cifs_revalidate_dentry_attr(dentry);
+ if (rc)
+ return rc;
+
+ if (CIFS_I(inode)->invalid_mapping)
+ rc = cifs_invalidate_mapping(inode);
+ return rc;
+}
+
int cifs_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(dentry->d_sb);
struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
- int err = cifs_revalidate_dentry(dentry);
+ struct inode *inode = dentry->d_inode;
+ int rc;
- if (!err) {
- generic_fillattr(dentry->d_inode, stat);
- stat->blksize = CIFS_MAX_MSGSIZE;
- stat->ino = CIFS_I(dentry->d_inode)->uniqueid;
-
- /*
- * If on a multiuser mount without unix extensions, and the
- * admin hasn't overridden them, set the ownership to the
- * fsuid/fsgid of the current process.
- */
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) &&
- !tcon->unix_ext) {
- if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID))
- stat->uid = current_fsuid();
- if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID))
- stat->gid = current_fsgid();
+ /*
+ * We need to be sure that all dirty pages are written and the server
+ * has actual ctime, mtime and file length.
+ */
+ if (!CIFS_I(inode)->clientCanCacheRead && inode->i_mapping &&
+ inode->i_mapping->nrpages != 0) {
+ rc = filemap_fdatawait(inode->i_mapping);
+ if (rc) {
+ mapping_set_error(inode->i_mapping, rc);
+ return rc;
}
}
- return err;
+
+ rc = cifs_revalidate_dentry_attr(dentry);
+ if (rc)
+ return rc;
+
+ generic_fillattr(inode, stat);
+ stat->blksize = CIFS_MAX_MSGSIZE;
+ stat->ino = CIFS_I(inode)->uniqueid;
+
+ /*
+ * If on a multiuser mount without unix extensions, and the admin hasn't
+ * overridden them, set the ownership to the fsuid/fsgid of the current
+ * process.
+ */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) &&
+ !tcon->unix_ext) {
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID))
+ stat->uid = current_fsuid();
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID))
+ stat->gid = current_fsgid();
+ }
+ return rc;
}
static int cifs_truncate_page(struct address_space *mapping, loff_t from)
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 0c684ae..907531a 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -304,12 +304,10 @@
memset(temp, 0, 256); /* bigger than MAX_CIFS_HDR_SIZE */
- buffer->smb_buf_length =
+ buffer->smb_buf_length = cpu_to_be32(
(2 * word_count) + sizeof(struct smb_hdr) -
4 /* RFC 1001 length field does not count */ +
- 2 /* for bcc field itself */ ;
- /* Note that this is the only network field that has to be converted
- to big endian and it is done just before we send it */
+ 2 /* for bcc field itself */) ;
buffer->Protocol[0] = 0xFF;
buffer->Protocol[1] = 'S';
@@ -424,7 +422,7 @@
int
checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length)
{
- __u32 len = smb->smb_buf_length;
+ __u32 len = be32_to_cpu(smb->smb_buf_length);
__u32 clc_len; /* calculated length */
cFYI(0, "checkSMB Length: 0x%x, smb_buf_length: 0x%x", length, len);
@@ -464,7 +462,7 @@
if (check_smb_hdr(smb, mid))
return 1;
- clc_len = smbCalcSize_LE(smb);
+ clc_len = smbCalcSize(smb);
if (4 + len != length) {
cERROR(1, "Length read does not match RFC1001 length %d",
@@ -521,7 +519,7 @@
(struct smb_com_transaction_change_notify_rsp *)buf;
struct file_notify_information *pnotify;
__u32 data_offset = 0;
- if (get_bcc_le(buf) > sizeof(struct file_notify_information)) {
+ if (get_bcc(buf) > sizeof(struct file_notify_information)) {
data_offset = le32_to_cpu(pSMBr->DataOffset);
pnotify = (struct file_notify_information *)
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 79f641e..79b71c2 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -919,13 +919,6 @@
2 /* size of the bcc field */ + get_bcc(ptr));
}
-unsigned int
-smbCalcSize_LE(struct smb_hdr *ptr)
-{
- return (sizeof(struct smb_hdr) + (2 * ptr->WordCount) +
- 2 /* size of the bcc field */ + get_bcc_le(ptr));
-}
-
/* The following are taken from fs/ntfs/util.c */
#define NTFS_TIME_OFFSET ((u64)(369*365 + 89) * 24 * 3600 * 10000000)
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index f6728eb..7dd4621 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -276,7 +276,7 @@
}
static void
-decode_unicode_ssetup(char **pbcc_area, __u16 bleft, struct cifsSesInfo *ses,
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
const struct nls_table *nls_cp)
{
int len;
@@ -284,19 +284,6 @@
cFYI(1, "bleft %d", bleft);
- /*
- * Windows servers do not always double null terminate their final
- * Unicode string. Check to see if there are an uneven number of bytes
- * left. If so, then add an extra NULL pad byte to the end of the
- * response.
- *
- * See section 2.7.2 in "Implementing CIFS" for details
- */
- if (bleft % 2) {
- data[bleft] = 0;
- ++bleft;
- }
-
kfree(ses->serverOS);
ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
cFYI(1, "serverOS=%s", ses->serverOS);
@@ -634,7 +621,7 @@
and rest of bcc area. This allows us to avoid
a large buffer 17K allocation */
iov[0].iov_base = (char *)pSMB;
- iov[0].iov_len = smb_buf->smb_buf_length + 4;
+ iov[0].iov_len = be32_to_cpu(smb_buf->smb_buf_length) + 4;
/* setting this here allows the code at the end of the function
to free the request buffer if there's an error */
@@ -669,7 +656,7 @@
* to use challenge/response method (i.e. Password bit is 1).
*/
- calc_lanman_hash(ses->password, ses->server->cryptkey,
+ rc = calc_lanman_hash(ses->password, ses->server->cryptkey,
ses->server->secMode & SECMODE_PW_ENCRYPT ?
true : false, lnm_session_key);
@@ -872,9 +859,10 @@
iov[2].iov_len = (long) bcc_ptr - (long) str_area;
count = iov[1].iov_len + iov[2].iov_len;
- smb_buf->smb_buf_length += count;
+ smb_buf->smb_buf_length =
+ cpu_to_be32(be32_to_cpu(smb_buf->smb_buf_length) + count);
- put_bcc_le(count, smb_buf);
+ put_bcc(count, smb_buf);
rc = SendReceive2(xid, ses, iov, 3 /* num_iovecs */, &resp_buf_type,
CIFS_LOG_ERROR);
@@ -929,7 +917,9 @@
}
/* BB check if Unicode and decode strings */
- if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+ if (bytes_remaining == 0) {
+ /* no string area to decode, do nothing */
+ } else if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
/* unicode string area must be word-aligned */
if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
++bcc_ptr;
diff --git a/fs/cifs/smbdes.c b/fs/cifs/smbdes.c
deleted file mode 100644
index 0472148..0000000
--- a/fs/cifs/smbdes.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- Unix SMB/Netbios implementation.
- Version 1.9.
-
- a partial implementation of DES designed for use in the
- SMB authentication protocol
-
- Copyright (C) Andrew Tridgell 1998
- Modified by Steve French (sfrench@us.ibm.com) 2002,2004
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* NOTES:
-
- This code makes no attempt to be fast! In fact, it is a very
- slow implementation
-
- This code is NOT a complete DES implementation. It implements only
- the minimum necessary for SMB authentication, as used by all SMB
- products (including every copy of Microsoft Windows95 ever sold)
-
- In particular, it can only do a unchained forward DES pass. This
- means it is not possible to use this code for encryption/decryption
- of data, instead it is only useful as a "hash" algorithm.
-
- There is no entry point into this code that allows normal DES operation.
-
- I believe this means that this code does not come under ITAR
- regulations but this is NOT a legal opinion. If you are concerned
- about the applicability of ITAR regulations to this code then you
- should confirm it for yourself (and maybe let me know if you come
- up with a different answer to the one above)
-*/
-#include <linux/slab.h>
-#define uchar unsigned char
-
-static uchar perm1[56] = { 57, 49, 41, 33, 25, 17, 9,
- 1, 58, 50, 42, 34, 26, 18,
- 10, 2, 59, 51, 43, 35, 27,
- 19, 11, 3, 60, 52, 44, 36,
- 63, 55, 47, 39, 31, 23, 15,
- 7, 62, 54, 46, 38, 30, 22,
- 14, 6, 61, 53, 45, 37, 29,
- 21, 13, 5, 28, 20, 12, 4
-};
-
-static uchar perm2[48] = { 14, 17, 11, 24, 1, 5,
- 3, 28, 15, 6, 21, 10,
- 23, 19, 12, 4, 26, 8,
- 16, 7, 27, 20, 13, 2,
- 41, 52, 31, 37, 47, 55,
- 30, 40, 51, 45, 33, 48,
- 44, 49, 39, 56, 34, 53,
- 46, 42, 50, 36, 29, 32
-};
-
-static uchar perm3[64] = { 58, 50, 42, 34, 26, 18, 10, 2,
- 60, 52, 44, 36, 28, 20, 12, 4,
- 62, 54, 46, 38, 30, 22, 14, 6,
- 64, 56, 48, 40, 32, 24, 16, 8,
- 57, 49, 41, 33, 25, 17, 9, 1,
- 59, 51, 43, 35, 27, 19, 11, 3,
- 61, 53, 45, 37, 29, 21, 13, 5,
- 63, 55, 47, 39, 31, 23, 15, 7
-};
-
-static uchar perm4[48] = { 32, 1, 2, 3, 4, 5,
- 4, 5, 6, 7, 8, 9,
- 8, 9, 10, 11, 12, 13,
- 12, 13, 14, 15, 16, 17,
- 16, 17, 18, 19, 20, 21,
- 20, 21, 22, 23, 24, 25,
- 24, 25, 26, 27, 28, 29,
- 28, 29, 30, 31, 32, 1
-};
-
-static uchar perm5[32] = { 16, 7, 20, 21,
- 29, 12, 28, 17,
- 1, 15, 23, 26,
- 5, 18, 31, 10,
- 2, 8, 24, 14,
- 32, 27, 3, 9,
- 19, 13, 30, 6,
- 22, 11, 4, 25
-};
-
-static uchar perm6[64] = { 40, 8, 48, 16, 56, 24, 64, 32,
- 39, 7, 47, 15, 55, 23, 63, 31,
- 38, 6, 46, 14, 54, 22, 62, 30,
- 37, 5, 45, 13, 53, 21, 61, 29,
- 36, 4, 44, 12, 52, 20, 60, 28,
- 35, 3, 43, 11, 51, 19, 59, 27,
- 34, 2, 42, 10, 50, 18, 58, 26,
- 33, 1, 41, 9, 49, 17, 57, 25
-};
-
-static uchar sc[16] = { 1, 1, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 1 };
-
-static uchar sbox[8][4][16] = {
- {{14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7},
- {0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8},
- {4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0},
- {15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13} },
-
- {{15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10},
- {3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5},
- {0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15},
- {13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9} },
-
- {{10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8},
- {13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1},
- {13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7},
- {1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12} },
-
- {{7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15},
- {13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9},
- {10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4},
- {3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14} },
-
- {{2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9},
- {14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6},
- {4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14},
- {11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3} },
-
- {{12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11},
- {10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8},
- {9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6},
- {4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13} },
-
- {{4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1},
- {13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6},
- {1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2},
- {6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12} },
-
- {{13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7},
- {1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2},
- {7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8},
- {2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11} }
-};
-
-static void
-permute(char *out, char *in, uchar *p, int n)
-{
- int i;
- for (i = 0; i < n; i++)
- out[i] = in[p[i] - 1];
-}
-
-static void
-lshift(char *d, int count, int n)
-{
- char out[64];
- int i;
- for (i = 0; i < n; i++)
- out[i] = d[(i + count) % n];
- for (i = 0; i < n; i++)
- d[i] = out[i];
-}
-
-static void
-concat(char *out, char *in1, char *in2, int l1, int l2)
-{
- while (l1--)
- *out++ = *in1++;
- while (l2--)
- *out++ = *in2++;
-}
-
-static void
-xor(char *out, char *in1, char *in2, int n)
-{
- int i;
- for (i = 0; i < n; i++)
- out[i] = in1[i] ^ in2[i];
-}
-
-static void
-dohash(char *out, char *in, char *key, int forw)
-{
- int i, j, k;
- char *pk1;
- char c[28];
- char d[28];
- char *cd;
- char (*ki)[48];
- char *pd1;
- char l[32], r[32];
- char *rl;
-
- /* Have to reduce stack usage */
- pk1 = kmalloc(56+56+64+64, GFP_KERNEL);
- if (pk1 == NULL)
- return;
-
- ki = kmalloc(16*48, GFP_KERNEL);
- if (ki == NULL) {
- kfree(pk1);
- return;
- }
-
- cd = pk1 + 56;
- pd1 = cd + 56;
- rl = pd1 + 64;
-
- permute(pk1, key, perm1, 56);
-
- for (i = 0; i < 28; i++)
- c[i] = pk1[i];
- for (i = 0; i < 28; i++)
- d[i] = pk1[i + 28];
-
- for (i = 0; i < 16; i++) {
- lshift(c, sc[i], 28);
- lshift(d, sc[i], 28);
-
- concat(cd, c, d, 28, 28);
- permute(ki[i], cd, perm2, 48);
- }
-
- permute(pd1, in, perm3, 64);
-
- for (j = 0; j < 32; j++) {
- l[j] = pd1[j];
- r[j] = pd1[j + 32];
- }
-
- for (i = 0; i < 16; i++) {
- char *er; /* er[48] */
- char *erk; /* erk[48] */
- char b[8][6];
- char *cb; /* cb[32] */
- char *pcb; /* pcb[32] */
- char *r2; /* r2[32] */
-
- er = kmalloc(48+48+32+32+32, GFP_KERNEL);
- if (er == NULL) {
- kfree(pk1);
- kfree(ki);
- return;
- }
- erk = er+48;
- cb = erk+48;
- pcb = cb+32;
- r2 = pcb+32;
-
- permute(er, r, perm4, 48);
-
- xor(erk, er, ki[forw ? i : 15 - i], 48);
-
- for (j = 0; j < 8; j++)
- for (k = 0; k < 6; k++)
- b[j][k] = erk[j * 6 + k];
-
- for (j = 0; j < 8; j++) {
- int m, n;
- m = (b[j][0] << 1) | b[j][5];
-
- n = (b[j][1] << 3) | (b[j][2] << 2) | (b[j][3] <<
- 1) | b[j][4];
-
- for (k = 0; k < 4; k++)
- b[j][k] =
- (sbox[j][m][n] & (1 << (3 - k))) ? 1 : 0;
- }
-
- for (j = 0; j < 8; j++)
- for (k = 0; k < 4; k++)
- cb[j * 4 + k] = b[j][k];
- permute(pcb, cb, perm5, 32);
-
- xor(r2, l, pcb, 32);
-
- for (j = 0; j < 32; j++)
- l[j] = r[j];
-
- for (j = 0; j < 32; j++)
- r[j] = r2[j];
-
- kfree(er);
- }
-
- concat(rl, r, l, 32, 32);
-
- permute(out, rl, perm6, 64);
- kfree(pk1);
- kfree(ki);
-}
-
-static void
-str_to_key(unsigned char *str, unsigned char *key)
-{
- int i;
-
- key[0] = str[0] >> 1;
- key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2);
- key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3);
- key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4);
- key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5);
- key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6);
- key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7);
- key[7] = str[6] & 0x7F;
- for (i = 0; i < 8; i++)
- key[i] = (key[i] << 1);
-}
-
-static void
-smbhash(unsigned char *out, const unsigned char *in, unsigned char *key,
- int forw)
-{
- int i;
- char *outb; /* outb[64] */
- char *inb; /* inb[64] */
- char *keyb; /* keyb[64] */
- unsigned char key2[8];
-
- outb = kmalloc(64 * 3, GFP_KERNEL);
- if (outb == NULL)
- return;
-
- inb = outb + 64;
- keyb = inb + 64;
-
- str_to_key(key, key2);
-
- for (i = 0; i < 64; i++) {
- inb[i] = (in[i / 8] & (1 << (7 - (i % 8)))) ? 1 : 0;
- keyb[i] = (key2[i / 8] & (1 << (7 - (i % 8)))) ? 1 : 0;
- outb[i] = 0;
- }
-
- dohash(outb, inb, keyb, forw);
-
- for (i = 0; i < 8; i++)
- out[i] = 0;
-
- for (i = 0; i < 64; i++) {
- if (outb[i])
- out[i / 8] |= (1 << (7 - (i % 8)));
- }
- kfree(outb);
-}
-
-void
-E_P16(unsigned char *p14, unsigned char *p16)
-{
- unsigned char sp8[8] =
- { 0x4b, 0x47, 0x53, 0x21, 0x40, 0x23, 0x24, 0x25 };
- smbhash(p16, sp8, p14, 1);
- smbhash(p16 + 8, sp8, p14 + 7, 1);
-}
-
-void
-E_P24(unsigned char *p21, const unsigned char *c8, unsigned char *p24)
-{
- smbhash(p24, c8, p21, 1);
- smbhash(p24 + 8, c8, p21 + 7, 1);
- smbhash(p24 + 16, c8, p21 + 14, 1);
-}
-
-#if 0 /* currently unused */
-static void
-D_P16(unsigned char *p14, unsigned char *in, unsigned char *out)
-{
- smbhash(out, in, p14, 0);
- smbhash(out + 8, in + 8, p14 + 7, 0);
-}
-
-static void
-E_old_pw_hash(unsigned char *p14, unsigned char *in, unsigned char *out)
-{
- smbhash(out, in, p14, 1);
- smbhash(out + 8, in + 8, p14 + 7, 1);
-}
-/* these routines are currently unneeded, but may be
- needed later */
-void
-cred_hash1(unsigned char *out, unsigned char *in, unsigned char *key)
-{
- unsigned char buf[8];
-
- smbhash(buf, in, key, 1);
- smbhash(out, buf, key + 9, 1);
-}
-
-void
-cred_hash2(unsigned char *out, unsigned char *in, unsigned char *key)
-{
- unsigned char buf[8];
- static unsigned char key2[8];
-
- smbhash(buf, in, key, 1);
- key2[0] = key[7];
- smbhash(out, buf, key2, 1);
-}
-
-void
-cred_hash3(unsigned char *out, unsigned char *in, unsigned char *key, int forw)
-{
- static unsigned char key2[8];
-
- smbhash(out, in, key, forw);
- key2[0] = key[7];
- smbhash(out + 8, in + 8, key2, forw);
-}
-#endif /* unneeded routines */
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index b5041c8..1525d5e 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -47,6 +47,88 @@
#define SSVALX(buf,pos,val) (CVAL(buf,pos)=(val)&0xFF,CVAL(buf,pos+1)=(val)>>8)
#define SSVAL(buf,pos,val) SSVALX((buf),(pos),((__u16)(val)))
+static void
+str_to_key(unsigned char *str, unsigned char *key)
+{
+ int i;
+
+ key[0] = str[0] >> 1;
+ key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2);
+ key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3);
+ key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4);
+ key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5);
+ key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6);
+ key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7);
+ key[7] = str[6] & 0x7F;
+ for (i = 0; i < 8; i++)
+ key[i] = (key[i] << 1);
+}
+
+static int
+smbhash(unsigned char *out, const unsigned char *in, unsigned char *key)
+{
+ int rc;
+ unsigned char key2[8];
+ struct crypto_blkcipher *tfm_des;
+ struct scatterlist sgin, sgout;
+ struct blkcipher_desc desc;
+
+ str_to_key(key, key2);
+
+ tfm_des = crypto_alloc_blkcipher("ecb(des)", 0, CRYPTO_ALG_ASYNC);
+ if (IS_ERR(tfm_des)) {
+ rc = PTR_ERR(tfm_des);
+ cERROR(1, "could not allocate des crypto API\n");
+ goto smbhash_err;
+ }
+
+ desc.tfm = tfm_des;
+
+ crypto_blkcipher_setkey(tfm_des, key2, 8);
+
+ sg_init_one(&sgin, in, 8);
+ sg_init_one(&sgout, out, 8);
+
+ rc = crypto_blkcipher_encrypt(&desc, &sgout, &sgin, 8);
+ if (rc) {
+ cERROR(1, "could not encrypt crypt key rc: %d\n", rc);
+ crypto_free_blkcipher(tfm_des);
+ goto smbhash_err;
+ }
+
+smbhash_err:
+ return rc;
+}
+
+static int
+E_P16(unsigned char *p14, unsigned char *p16)
+{
+ int rc;
+ unsigned char sp8[8] =
+ { 0x4b, 0x47, 0x53, 0x21, 0x40, 0x23, 0x24, 0x25 };
+
+ rc = smbhash(p16, sp8, p14);
+ if (rc)
+ return rc;
+ rc = smbhash(p16 + 8, sp8, p14 + 7);
+ return rc;
+}
+
+static int
+E_P24(unsigned char *p21, const unsigned char *c8, unsigned char *p24)
+{
+ int rc;
+
+ rc = smbhash(p24, c8, p21);
+ if (rc)
+ return rc;
+ rc = smbhash(p24 + 8, c8, p21 + 7);
+ if (rc)
+ return rc;
+ rc = smbhash(p24 + 16, c8, p21 + 14);
+ return rc;
+}
+
/* produce a md4 message digest from data of length n bytes */
int
mdfour(unsigned char *md4_hash, unsigned char *link_str, int link_len)
@@ -87,40 +169,30 @@
return rc;
}
-/* Does the des encryption from the NT or LM MD4 hash. */
-static void
-SMBOWFencrypt(unsigned char passwd[16], const unsigned char *c8,
- unsigned char p24[24])
-{
- unsigned char p21[21];
-
- memset(p21, '\0', 21);
-
- memcpy(p21, passwd, 16);
- E_P24(p21, c8, p24);
-}
-
/*
This implements the X/Open SMB password encryption
It takes a password, a 8 byte "crypt key" and puts 24 bytes of
encrypted password into p24 */
/* Note that password must be uppercased and null terminated */
-void
+int
SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24)
{
- unsigned char p14[15], p21[21];
+ int rc;
+ unsigned char p14[14], p16[16], p21[21];
- memset(p21, '\0', 21);
memset(p14, '\0', 14);
- strncpy((char *) p14, (char *) passwd, 14);
+ memset(p16, '\0', 16);
+ memset(p21, '\0', 21);
-/* strupper((char *)p14); *//* BB at least uppercase the easy range */
- E_P16(p14, p21);
+ memcpy(p14, passwd, 14);
+ rc = E_P16(p14, p16);
+ if (rc)
+ return rc;
- SMBOWFencrypt(p21, c8, p24);
+ memcpy(p21, p16, 16);
+ rc = E_P24(p21, c8, p24);
- memset(p14, 0, 15);
- memset(p21, 0, 21);
+ return rc;
}
/* Routines for Windows NT MD4 Hash functions. */
@@ -279,16 +351,18 @@
SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
{
int rc;
- unsigned char p21[21];
+ unsigned char p16[16], p21[21];
+ memset(p16, '\0', 16);
memset(p21, '\0', 21);
- rc = E_md4hash(passwd, p21);
+ rc = E_md4hash(passwd, p16);
if (rc) {
cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc);
return rc;
}
- SMBOWFencrypt(p21, c8, p24);
+ memcpy(p21, p16, 16);
+ rc = E_P24(p21, c8, p24);
return rc;
}
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 46d8756f..f2513fb 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -129,7 +129,7 @@
unsigned int len = iov[0].iov_len;
unsigned int total_len;
int first_vec = 0;
- unsigned int smb_buf_length = smb_buffer->smb_buf_length;
+ unsigned int smb_buf_length = be32_to_cpu(smb_buffer->smb_buf_length);
struct socket *ssocket = server->ssocket;
if (ssocket == NULL)
@@ -144,17 +144,10 @@
else
smb_msg.msg_flags = MSG_NOSIGNAL;
- /* smb header is converted in header_assemble. bcc and rest of SMB word
- area, and byte area if necessary, is converted to littleendian in
- cifssmb.c and RFC1001 len is converted to bigendian in smb_send
- Flags2 is converted in SendReceive */
-
-
total_len = 0;
for (i = 0; i < n_vec; i++)
total_len += iov[i].iov_len;
- smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length);
cFYI(1, "Sending smb: total_len %d", total_len);
dump_smb(smb_buffer, len);
@@ -243,7 +236,7 @@
/* Don't want to modify the buffer as a
side effect of this call. */
- smb_buffer->smb_buf_length = smb_buf_length;
+ smb_buffer->smb_buf_length = cpu_to_be32(smb_buf_length);
return rc;
}
@@ -387,7 +380,7 @@
#ifdef CONFIG_CIFS_STATS2
atomic_inc(&server->inSend);
#endif
- rc = smb_send(server, in_buf, in_buf->smb_buf_length);
+ rc = smb_send(server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
#ifdef CONFIG_CIFS_STATS2
atomic_dec(&server->inSend);
mid->when_sent = jiffies;
@@ -422,7 +415,7 @@
int resp_buf_type;
iov[0].iov_base = (char *)in_buf;
- iov[0].iov_len = in_buf->smb_buf_length + 4;
+ iov[0].iov_len = be32_to_cpu(in_buf->smb_buf_length) + 4;
flags |= CIFS_NO_RESP;
rc = SendReceive2(xid, ses, iov, 1, &resp_buf_type, flags);
cFYI(DBG2, "SendRcvNoRsp flags %d rc %d", flags, rc);
@@ -488,10 +481,10 @@
int rc = 0;
/* -4 for RFC1001 length and +2 for BCC field */
- in_buf->smb_buf_length = sizeof(struct smb_hdr) - 4 + 2;
+ in_buf->smb_buf_length = cpu_to_be32(sizeof(struct smb_hdr) - 4 + 2);
in_buf->Command = SMB_COM_NT_CANCEL;
in_buf->WordCount = 0;
- put_bcc_le(0, in_buf);
+ put_bcc(0, in_buf);
mutex_lock(&server->srv_mutex);
rc = cifs_sign_smb(in_buf, server, &mid->sequence_number);
@@ -499,7 +492,7 @@
mutex_unlock(&server->srv_mutex);
return rc;
}
- rc = smb_send(server, in_buf, in_buf->smb_buf_length);
+ rc = smb_send(server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
mutex_unlock(&server->srv_mutex);
cFYI(1, "issued NT_CANCEL for mid %u, rc = %d",
@@ -612,7 +605,7 @@
return rc;
}
- receive_len = midQ->resp_buf->smb_buf_length;
+ receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
cERROR(1, "Frame too large received. Length: %d Xid: %d",
@@ -651,11 +644,6 @@
rc = map_smb_to_linux_error(midQ->resp_buf,
flags & CIFS_LOG_ERROR);
- /* convert ByteCount if necessary */
- if (receive_len >= sizeof(struct smb_hdr) - 4
- /* do not count RFC1001 header */ +
- (2 * midQ->resp_buf->WordCount) + 2 /* bcc */ )
- put_bcc(get_bcc_le(midQ->resp_buf), midQ->resp_buf);
if ((flags & CIFS_NO_RESP) == 0)
midQ->resp_buf = NULL; /* mark it so buf will
not be freed by
@@ -698,9 +686,10 @@
to the same server. We may make this configurable later or
use ses->maxReq */
- if (in_buf->smb_buf_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+ if (be32_to_cpu(in_buf->smb_buf_length) > CIFSMaxBufSize +
+ MAX_CIFS_HDR_SIZE - 4) {
cERROR(1, "Illegal length, greater than maximum frame, %d",
- in_buf->smb_buf_length);
+ be32_to_cpu(in_buf->smb_buf_length));
return -EIO;
}
@@ -733,7 +722,7 @@
#ifdef CONFIG_CIFS_STATS2
atomic_inc(&ses->server->inSend);
#endif
- rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
+ rc = smb_send(ses->server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
#ifdef CONFIG_CIFS_STATS2
atomic_dec(&ses->server->inSend);
midQ->when_sent = jiffies;
@@ -768,7 +757,7 @@
return rc;
}
- receive_len = midQ->resp_buf->smb_buf_length;
+ receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
cERROR(1, "Frame too large received. Length: %d Xid: %d",
@@ -781,7 +770,7 @@
if (midQ->resp_buf && out_buf
&& (midQ->midState == MID_RESPONSE_RECEIVED)) {
- out_buf->smb_buf_length = receive_len;
+ out_buf->smb_buf_length = cpu_to_be32(receive_len);
memcpy((char *)out_buf + 4,
(char *)midQ->resp_buf + 4,
receive_len);
@@ -800,16 +789,10 @@
}
}
- *pbytes_returned = out_buf->smb_buf_length;
+ *pbytes_returned = be32_to_cpu(out_buf->smb_buf_length);
/* BB special case reconnect tid and uid here? */
rc = map_smb_to_linux_error(out_buf, 0 /* no log */ );
-
- /* convert ByteCount if necessary */
- if (receive_len >= sizeof(struct smb_hdr) - 4
- /* do not count RFC1001 header */ +
- (2 * out_buf->WordCount) + 2 /* bcc */ )
- put_bcc(get_bcc_le(midQ->resp_buf), midQ->resp_buf);
} else {
rc = -EIO;
cERROR(1, "Bad MID state?");
@@ -877,9 +860,10 @@
to the same server. We may make this configurable later or
use ses->maxReq */
- if (in_buf->smb_buf_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+ if (be32_to_cpu(in_buf->smb_buf_length) > CIFSMaxBufSize +
+ MAX_CIFS_HDR_SIZE - 4) {
cERROR(1, "Illegal length, greater than maximum frame, %d",
- in_buf->smb_buf_length);
+ be32_to_cpu(in_buf->smb_buf_length));
return -EIO;
}
@@ -910,7 +894,7 @@
#ifdef CONFIG_CIFS_STATS2
atomic_inc(&ses->server->inSend);
#endif
- rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
+ rc = smb_send(ses->server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
#ifdef CONFIG_CIFS_STATS2
atomic_dec(&ses->server->inSend);
midQ->when_sent = jiffies;
@@ -977,7 +961,7 @@
if (rc != 0)
return rc;
- receive_len = midQ->resp_buf->smb_buf_length;
+ receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
cERROR(1, "Frame too large received. Length: %d Xid: %d",
receive_len, xid);
@@ -993,7 +977,7 @@
goto out;
}
- out_buf->smb_buf_length = receive_len;
+ out_buf->smb_buf_length = cpu_to_be32(receive_len);
memcpy((char *)out_buf + 4,
(char *)midQ->resp_buf + 4,
receive_len);
@@ -1012,17 +996,11 @@
}
}
- *pbytes_returned = out_buf->smb_buf_length;
+ *pbytes_returned = be32_to_cpu(out_buf->smb_buf_length);
/* BB special case reconnect tid and uid here? */
rc = map_smb_to_linux_error(out_buf, 0 /* no log */ );
- /* convert ByteCount if necessary */
- if (receive_len >= sizeof(struct smb_hdr) - 4
- /* do not count RFC1001 header */ +
- (2 * out_buf->WordCount) + 2 /* bcc */ )
- put_bcc(get_bcc_le(out_buf), out_buf);
-
out:
delete_mid(midQ);
if (rstart && rc == -EACCES)
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index eae2a14..912995e 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -112,6 +112,7 @@
struct cifsTconInfo *pTcon;
struct super_block *sb;
char *full_path;
+ struct cifs_ntsd *pacl;
if (direntry == NULL)
return -EIO;
@@ -166,6 +167,25 @@
rc = CIFSSMBSetEA(xid, pTcon, full_path, ea_name, ea_value,
(__u16)value_size, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ } else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL,
+ strlen(CIFS_XATTR_CIFS_ACL)) == 0) {
+ pacl = kmalloc(value_size, GFP_KERNEL);
+ if (!pacl) {
+ cFYI(1, "%s: Can't allocate memory for ACL",
+ __func__);
+ rc = -ENOMEM;
+ } else {
+#ifdef CONFIG_CIFS_ACL
+ memcpy(pacl, ea_value, value_size);
+ rc = set_cifs_acl(pacl, value_size,
+ direntry->d_inode, full_path);
+ if (rc == 0) /* force revalidate of the inode */
+ CIFS_I(direntry->d_inode)->time = 0;
+ kfree(pacl);
+#else
+ cFYI(1, "Set CIFS ACL not supported yet");
+#endif /* CONFIG_CIFS_ACL */
+ }
} else {
int temp;
temp = strncmp(ea_name, POSIX_ACL_XATTR_ACCESS,
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 3313dd1..9a37a9b 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -53,11 +53,14 @@
static void configfs_d_iput(struct dentry * dentry,
struct inode * inode)
{
- struct configfs_dirent * sd = dentry->d_fsdata;
+ struct configfs_dirent *sd = dentry->d_fsdata;
if (sd) {
BUG_ON(sd->s_dentry != dentry);
+ /* Coordinate with configfs_readdir */
+ spin_lock(&configfs_dirent_lock);
sd->s_dentry = NULL;
+ spin_unlock(&configfs_dirent_lock);
configfs_put(sd);
}
iput(inode);
@@ -689,7 +692,8 @@
sd = child->d_fsdata;
sd->s_type |= CONFIGFS_USET_DEFAULT;
} else {
- d_delete(child);
+ BUG_ON(child->d_inode);
+ d_drop(child);
dput(child);
}
}
@@ -1545,7 +1549,7 @@
struct configfs_dirent * parent_sd = dentry->d_fsdata;
struct configfs_dirent *cursor = filp->private_data;
struct list_head *p, *q = &cursor->s_sibling;
- ino_t ino;
+ ino_t ino = 0;
int i = filp->f_pos;
switch (i) {
@@ -1573,6 +1577,7 @@
struct configfs_dirent *next;
const char * name;
int len;
+ struct inode *inode = NULL;
next = list_entry(p, struct configfs_dirent,
s_sibling);
@@ -1581,9 +1586,28 @@
name = configfs_get_name(next);
len = strlen(name);
- if (next->s_dentry)
- ino = next->s_dentry->d_inode->i_ino;
- else
+
+ /*
+ * We'll have a dentry and an inode for
+ * PINNED items and for open attribute
+ * files. We lock here to prevent a race
+ * with configfs_d_iput() clearing
+ * s_dentry before calling iput().
+ *
+ * Why do we go to the trouble? If
+ * someone has an attribute file open,
+ * the inode number should match until
+ * they close it. Beyond that, we don't
+ * care.
+ */
+ spin_lock(&configfs_dirent_lock);
+ dentry = next->s_dentry;
+ if (dentry)
+ inode = dentry->d_inode;
+ if (inode)
+ ino = inode->i_ino;
+ spin_unlock(&configfs_dirent_lock);
+ if (!inode)
ino = iunique(configfs_sb, 2);
if (filldir(dirent, name, len, filp->f_pos, ino,
@@ -1683,7 +1707,8 @@
err = configfs_attach_group(sd->s_element, &group->cg_item,
dentry);
if (err) {
- d_delete(dentry);
+ BUG_ON(dentry->d_inode);
+ d_drop(dentry);
dput(dentry);
} else {
spin_lock(&configfs_dirent_lock);
diff --git a/fs/dcache.c b/fs/dcache.c
index 22a0ef4..18b2a1f 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -35,6 +35,7 @@
#include <linux/hardirq.h>
#include <linux/bit_spinlock.h>
#include <linux/rculist_bl.h>
+#include <linux/prefetch.h>
#include "internal.h"
/*
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 89d394d..90f7657 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -428,26 +428,17 @@
size_t count, loff_t *ppos)
{
char buf[32];
- int buf_size;
+ size_t buf_size;
+ bool bv;
u32 *val = file->private_data;
buf_size = min(count, (sizeof(buf)-1));
if (copy_from_user(buf, user_buf, buf_size))
return -EFAULT;
- switch (buf[0]) {
- case 'y':
- case 'Y':
- case '1':
- *val = 1;
- break;
- case 'n':
- case 'N':
- case '0':
- *val = 0;
- break;
- }
-
+ if (strtobool(buf, &bv) == 0)
+ *val = bv;
+
return count;
}
diff --git a/fs/exec.c b/fs/exec.c
index 5e62d26..8328beb 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1659,6 +1659,7 @@
t = start;
do {
+ task_clear_group_stop_pending(t);
if (t != current && t->mm) {
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index c6ba49b..b32eb29 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -174,7 +174,7 @@
if (!inode)
return 0;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && (nd->flags & LOOKUP_RCU))
return -ECHILD;
fc = get_fuse_conn(inode);
diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile
index f3d23ef..8612820 100644
--- a/fs/gfs2/Makefile
+++ b/fs/gfs2/Makefile
@@ -1,9 +1,9 @@
ccflags-y := -I$(src)
obj-$(CONFIG_GFS2_FS) += gfs2.o
gfs2-y := acl.o bmap.o dir.o xattr.o glock.o \
- glops.o inode.o log.o lops.o main.o meta_io.o \
+ glops.o log.o lops.o main.o meta_io.o \
aops.o dentry.o export.o file.o \
- ops_fstype.o ops_inode.o quota.o \
+ ops_fstype.o inode.o quota.o \
recovery.o rgrp.o super.o sys.o trans.o util.o
gfs2-$(CONFIG_GFS2_FS_LOCKING_DLM) += lock_dlm.o
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 0f5c4f9..802ac5e 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -1076,8 +1076,8 @@
bd = bh->b_private;
if (bd && bd->bd_ail)
goto cannot_release;
- gfs2_assert_warn(sdp, !buffer_pinned(bh));
- gfs2_assert_warn(sdp, !buffer_dirty(bh));
+ if (buffer_pinned(bh) || buffer_dirty(bh))
+ goto not_possible;
bh = bh->b_this_page;
} while(bh != head);
gfs2_log_unlock(sdp);
@@ -1107,6 +1107,10 @@
} while (bh != head);
return try_to_free_buffers(page);
+
+not_possible: /* Should never happen */
+ WARN_ON(buffer_dirty(bh));
+ WARN_ON(buffer_pinned(bh));
cannot_release:
gfs2_log_unlock(sdp);
return 0;
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index f789c57..091ee47 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -82,12 +82,9 @@
struct qstr gfs2_qdot __read_mostly;
struct qstr gfs2_qdotdot __read_mostly;
-typedef int (*leaf_call_t) (struct gfs2_inode *dip, u32 index, u32 len,
- u64 leaf_no, void *data);
typedef int (*gfs2_dscan_t)(const struct gfs2_dirent *dent,
const struct qstr *name, void *opaque);
-
int gfs2_dir_get_new_buffer(struct gfs2_inode *ip, u64 block,
struct buffer_head **bhp)
{
@@ -1600,7 +1597,7 @@
*/
int gfs2_dir_add(struct inode *inode, const struct qstr *name,
- const struct gfs2_inode *nip, unsigned type)
+ const struct gfs2_inode *nip)
{
struct gfs2_inode *ip = GFS2_I(inode);
struct buffer_head *bh;
@@ -1616,7 +1613,7 @@
return PTR_ERR(dent);
dent = gfs2_init_dirent(inode, dent, name, bh);
gfs2_inum_out(nip, dent);
- dent->de_type = cpu_to_be16(type);
+ dent->de_type = cpu_to_be16(IF2DT(nip->i_inode.i_mode));
if (ip->i_diskflags & GFS2_DIF_EXHASH) {
leaf = (struct gfs2_leaf *)bh->b_data;
be16_add_cpu(&leaf->lf_entries, 1);
@@ -1628,6 +1625,8 @@
gfs2_trans_add_bh(ip->i_gl, bh, 1);
ip->i_entries++;
ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
+ if (S_ISDIR(nip->i_inode.i_mode))
+ inc_nlink(&ip->i_inode);
gfs2_dinode_out(ip, bh->b_data);
brelse(bh);
error = 0;
@@ -1672,8 +1671,9 @@
* Returns: 0 on success, error code on failure
*/
-int gfs2_dir_del(struct gfs2_inode *dip, const struct qstr *name)
+int gfs2_dir_del(struct gfs2_inode *dip, const struct dentry *dentry)
{
+ const struct qstr *name = &dentry->d_name;
struct gfs2_dirent *dent, *prev = NULL;
struct buffer_head *bh;
int error;
@@ -1714,6 +1714,8 @@
gfs2_trans_add_bh(dip->i_gl, bh, 1);
dip->i_entries--;
dip->i_inode.i_mtime = dip->i_inode.i_ctime = CURRENT_TIME;
+ if (S_ISDIR(dentry->d_inode->i_mode))
+ drop_nlink(&dip->i_inode);
gfs2_dinode_out(dip, bh->b_data);
brelse(bh);
mark_inode_dirty(&dip->i_inode);
@@ -1768,25 +1770,159 @@
}
/**
- * foreach_leaf - call a function for each leaf in a directory
+ * leaf_dealloc - Deallocate a directory leaf
* @dip: the directory
- * @lc: the function to call for each each
- * @data: private data to pass to it
+ * @index: the hash table offset in the directory
+ * @len: the number of pointers to this leaf
+ * @leaf_no: the leaf number
+ * @leaf_bh: buffer_head for the starting leaf
+ * last_dealloc: 1 if this is the final dealloc for the leaf, else 0
*
* Returns: errno
*/
-static int foreach_leaf(struct gfs2_inode *dip, leaf_call_t lc, void *data)
+static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
+ u64 leaf_no, struct buffer_head *leaf_bh,
+ int last_dealloc)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
+ struct gfs2_leaf *tmp_leaf;
+ struct gfs2_rgrp_list rlist;
+ struct buffer_head *bh, *dibh;
+ u64 blk, nblk;
+ unsigned int rg_blocks = 0, l_blocks = 0;
+ char *ht;
+ unsigned int x, size = len * sizeof(u64);
+ int error;
+
+ memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
+
+ ht = kzalloc(size, GFP_NOFS);
+ if (!ht)
+ return -ENOMEM;
+
+ if (!gfs2_alloc_get(dip)) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ error = gfs2_quota_hold(dip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
+ if (error)
+ goto out_put;
+
+ error = gfs2_rindex_hold(sdp, &dip->i_alloc->al_ri_gh);
+ if (error)
+ goto out_qs;
+
+ /* Count the number of leaves */
+ bh = leaf_bh;
+
+ for (blk = leaf_no; blk; blk = nblk) {
+ if (blk != leaf_no) {
+ error = get_leaf(dip, blk, &bh);
+ if (error)
+ goto out_rlist;
+ }
+ tmp_leaf = (struct gfs2_leaf *)bh->b_data;
+ nblk = be64_to_cpu(tmp_leaf->lf_next);
+ if (blk != leaf_no)
+ brelse(bh);
+
+ gfs2_rlist_add(sdp, &rlist, blk);
+ l_blocks++;
+ }
+
+ gfs2_rlist_alloc(&rlist, LM_ST_EXCLUSIVE);
+
+ for (x = 0; x < rlist.rl_rgrps; x++) {
+ struct gfs2_rgrpd *rgd;
+ rgd = rlist.rl_ghs[x].gh_gl->gl_object;
+ rg_blocks += rgd->rd_length;
+ }
+
+ error = gfs2_glock_nq_m(rlist.rl_rgrps, rlist.rl_ghs);
+ if (error)
+ goto out_rlist;
+
+ error = gfs2_trans_begin(sdp,
+ rg_blocks + (DIV_ROUND_UP(size, sdp->sd_jbsize) + 1) +
+ RES_DINODE + RES_STATFS + RES_QUOTA, l_blocks);
+ if (error)
+ goto out_rg_gunlock;
+
+ bh = leaf_bh;
+
+ for (blk = leaf_no; blk; blk = nblk) {
+ if (blk != leaf_no) {
+ error = get_leaf(dip, blk, &bh);
+ if (error)
+ goto out_end_trans;
+ }
+ tmp_leaf = (struct gfs2_leaf *)bh->b_data;
+ nblk = be64_to_cpu(tmp_leaf->lf_next);
+ if (blk != leaf_no)
+ brelse(bh);
+
+ gfs2_free_meta(dip, blk, 1);
+ gfs2_add_inode_blocks(&dip->i_inode, -1);
+ }
+
+ error = gfs2_dir_write_data(dip, ht, index * sizeof(u64), size);
+ if (error != size) {
+ if (error >= 0)
+ error = -EIO;
+ goto out_end_trans;
+ }
+
+ error = gfs2_meta_inode_buffer(dip, &dibh);
+ if (error)
+ goto out_end_trans;
+
+ gfs2_trans_add_bh(dip->i_gl, dibh, 1);
+ /* On the last dealloc, make this a regular file in case we crash.
+ (We don't want to free these blocks a second time.) */
+ if (last_dealloc)
+ dip->i_inode.i_mode = S_IFREG;
+ gfs2_dinode_out(dip, dibh->b_data);
+ brelse(dibh);
+
+out_end_trans:
+ gfs2_trans_end(sdp);
+out_rg_gunlock:
+ gfs2_glock_dq_m(rlist.rl_rgrps, rlist.rl_ghs);
+out_rlist:
+ gfs2_rlist_free(&rlist);
+ gfs2_glock_dq_uninit(&dip->i_alloc->al_ri_gh);
+out_qs:
+ gfs2_quota_unhold(dip);
+out_put:
+ gfs2_alloc_put(dip);
+out:
+ kfree(ht);
+ return error;
+}
+
+/**
+ * gfs2_dir_exhash_dealloc - free all the leaf blocks in a directory
+ * @dip: the directory
+ *
+ * Dealloc all on-disk directory leaves to FREEMETA state
+ * Change on-disk inode type to "regular file"
+ *
+ * Returns: errno
+ */
+
+int gfs2_dir_exhash_dealloc(struct gfs2_inode *dip)
{
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
struct buffer_head *bh;
struct gfs2_leaf *leaf;
u32 hsize, len;
u32 ht_offset, lp_offset, ht_offset_cur = -1;
- u32 index = 0;
+ u32 index = 0, next_index;
__be64 *lp;
u64 leaf_no;
- int error = 0;
+ int error = 0, last;
hsize = 1 << dip->i_depth;
if (hsize * sizeof(u64) != i_size_read(&dip->i_inode)) {
@@ -1821,13 +1957,15 @@
goto out;
leaf = (struct gfs2_leaf *)bh->b_data;
len = 1 << (dip->i_depth - be16_to_cpu(leaf->lf_depth));
- brelse(bh);
- error = lc(dip, index, len, leaf_no, data);
+ next_index = (index & ~(len - 1)) + len;
+ last = ((next_index >= hsize) ? 1 : 0);
+ error = leaf_dealloc(dip, index, len, leaf_no, bh,
+ last);
+ brelse(bh);
if (error)
goto out;
-
- index = (index & ~(len - 1)) + len;
+ index = next_index;
} else
index++;
}
@@ -1844,165 +1982,6 @@
}
/**
- * leaf_dealloc - Deallocate a directory leaf
- * @dip: the directory
- * @index: the hash table offset in the directory
- * @len: the number of pointers to this leaf
- * @leaf_no: the leaf number
- * @data: not used
- *
- * Returns: errno
- */
-
-static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
- u64 leaf_no, void *data)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
- struct gfs2_leaf *tmp_leaf;
- struct gfs2_rgrp_list rlist;
- struct buffer_head *bh, *dibh;
- u64 blk, nblk;
- unsigned int rg_blocks = 0, l_blocks = 0;
- char *ht;
- unsigned int x, size = len * sizeof(u64);
- int error;
-
- memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
-
- ht = kzalloc(size, GFP_NOFS);
- if (!ht)
- return -ENOMEM;
-
- if (!gfs2_alloc_get(dip)) {
- error = -ENOMEM;
- goto out;
- }
-
- error = gfs2_quota_hold(dip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
- if (error)
- goto out_put;
-
- error = gfs2_rindex_hold(sdp, &dip->i_alloc->al_ri_gh);
- if (error)
- goto out_qs;
-
- /* Count the number of leaves */
-
- for (blk = leaf_no; blk; blk = nblk) {
- error = get_leaf(dip, blk, &bh);
- if (error)
- goto out_rlist;
- tmp_leaf = (struct gfs2_leaf *)bh->b_data;
- nblk = be64_to_cpu(tmp_leaf->lf_next);
- brelse(bh);
-
- gfs2_rlist_add(sdp, &rlist, blk);
- l_blocks++;
- }
-
- gfs2_rlist_alloc(&rlist, LM_ST_EXCLUSIVE);
-
- for (x = 0; x < rlist.rl_rgrps; x++) {
- struct gfs2_rgrpd *rgd;
- rgd = rlist.rl_ghs[x].gh_gl->gl_object;
- rg_blocks += rgd->rd_length;
- }
-
- error = gfs2_glock_nq_m(rlist.rl_rgrps, rlist.rl_ghs);
- if (error)
- goto out_rlist;
-
- error = gfs2_trans_begin(sdp,
- rg_blocks + (DIV_ROUND_UP(size, sdp->sd_jbsize) + 1) +
- RES_DINODE + RES_STATFS + RES_QUOTA, l_blocks);
- if (error)
- goto out_rg_gunlock;
-
- for (blk = leaf_no; blk; blk = nblk) {
- error = get_leaf(dip, blk, &bh);
- if (error)
- goto out_end_trans;
- tmp_leaf = (struct gfs2_leaf *)bh->b_data;
- nblk = be64_to_cpu(tmp_leaf->lf_next);
- brelse(bh);
-
- gfs2_free_meta(dip, blk, 1);
- gfs2_add_inode_blocks(&dip->i_inode, -1);
- }
-
- error = gfs2_dir_write_data(dip, ht, index * sizeof(u64), size);
- if (error != size) {
- if (error >= 0)
- error = -EIO;
- goto out_end_trans;
- }
-
- error = gfs2_meta_inode_buffer(dip, &dibh);
- if (error)
- goto out_end_trans;
-
- gfs2_trans_add_bh(dip->i_gl, dibh, 1);
- gfs2_dinode_out(dip, dibh->b_data);
- brelse(dibh);
-
-out_end_trans:
- gfs2_trans_end(sdp);
-out_rg_gunlock:
- gfs2_glock_dq_m(rlist.rl_rgrps, rlist.rl_ghs);
-out_rlist:
- gfs2_rlist_free(&rlist);
- gfs2_glock_dq_uninit(&dip->i_alloc->al_ri_gh);
-out_qs:
- gfs2_quota_unhold(dip);
-out_put:
- gfs2_alloc_put(dip);
-out:
- kfree(ht);
- return error;
-}
-
-/**
- * gfs2_dir_exhash_dealloc - free all the leaf blocks in a directory
- * @dip: the directory
- *
- * Dealloc all on-disk directory leaves to FREEMETA state
- * Change on-disk inode type to "regular file"
- *
- * Returns: errno
- */
-
-int gfs2_dir_exhash_dealloc(struct gfs2_inode *dip)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
- struct buffer_head *bh;
- int error;
-
- /* Dealloc on-disk leaves to FREEMETA state */
- error = foreach_leaf(dip, leaf_dealloc, NULL);
- if (error)
- return error;
-
- /* Make this a regular file in case we crash.
- (We don't want to free these blocks a second time.) */
-
- error = gfs2_trans_begin(sdp, RES_DINODE, 0);
- if (error)
- return error;
-
- error = gfs2_meta_inode_buffer(dip, &bh);
- if (!error) {
- gfs2_trans_add_bh(dip->i_gl, bh, 1);
- ((struct gfs2_dinode *)bh->b_data)->di_mode =
- cpu_to_be32(S_IFREG);
- brelse(bh);
- }
-
- gfs2_trans_end(sdp);
-
- return error;
-}
-
-/**
* gfs2_diradd_alloc_required - find if adding entry will require an allocation
* @ip: the file being written to
* @filname: the filename that's going to be added
diff --git a/fs/gfs2/dir.h b/fs/gfs2/dir.h
index a98f644..e686af1 100644
--- a/fs/gfs2/dir.h
+++ b/fs/gfs2/dir.h
@@ -22,8 +22,8 @@
extern int gfs2_dir_check(struct inode *dir, const struct qstr *filename,
const struct gfs2_inode *ip);
extern int gfs2_dir_add(struct inode *inode, const struct qstr *filename,
- const struct gfs2_inode *ip, unsigned int type);
-extern int gfs2_dir_del(struct gfs2_inode *dip, const struct qstr *filename);
+ const struct gfs2_inode *ip);
+extern int gfs2_dir_del(struct gfs2_inode *dip, const struct dentry *dentry);
extern int gfs2_dir_read(struct inode *inode, u64 *offset, void *opaque,
filldir_t filldir);
extern int gfs2_dir_mvino(struct gfs2_inode *dip, const struct qstr *filename,
diff --git a/fs/gfs2/export.c b/fs/gfs2/export.c
index b5a5e60..fe9945f 100644
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -139,7 +139,7 @@
struct gfs2_sbd *sdp = sb->s_fs_info;
struct inode *inode;
- inode = gfs2_ilookup(sb, inum->no_addr);
+ inode = gfs2_ilookup(sb, inum->no_addr, 0);
if (inode) {
if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
iput(inode);
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index e483108..a9f5cbe 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -545,18 +545,10 @@
/**
* gfs2_fsync - sync the dirty data for a file (across the cluster)
* @file: the file that points to the dentry (we ignore this)
- * @dentry: the dentry that points to the inode to sync
+ * @datasync: set if we can ignore timestamp changes
*
- * The VFS will flush "normal" data for us. We only need to worry
- * about metadata here. For journaled data, we just do a log flush
- * as we can't avoid it. Otherwise we can just bale out if datasync
- * is set. For stuffed inodes we must flush the log in order to
- * ensure that all data is on disk.
- *
- * The call to write_inode_now() is there to write back metadata and
- * the inode itself. It does also try and write the data, but thats
- * (hopefully) a no-op due to the VFS having already called filemap_fdatawrite()
- * for us.
+ * The VFS will flush data for us. We only need to worry
+ * about metadata here.
*
* Returns: errno
*/
@@ -565,22 +557,20 @@
{
struct inode *inode = file->f_mapping->host;
int sync_state = inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC);
- int ret = 0;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ int ret;
- if (gfs2_is_jdata(GFS2_I(inode))) {
- gfs2_log_flush(GFS2_SB(inode), GFS2_I(inode)->i_gl);
- return 0;
+ if (datasync)
+ sync_state &= ~I_DIRTY_SYNC;
+
+ if (sync_state) {
+ ret = sync_inode_metadata(inode, 1);
+ if (ret)
+ return ret;
+ gfs2_ail_flush(ip->i_gl);
}
- if (sync_state != 0) {
- if (!datasync)
- ret = write_inode_now(inode, 0);
-
- if (gfs2_is_stuffed(GFS2_I(inode)))
- gfs2_log_flush(GFS2_SB(inode), GFS2_I(inode)->i_gl);
- }
-
- return ret;
+ return 0;
}
/**
@@ -826,6 +816,7 @@
loff_t bytes, max_bytes;
struct gfs2_alloc *al;
int error;
+ loff_t bsize_mask = ~((loff_t)sdp->sd_sb.sb_bsize - 1);
loff_t next = (offset + len - 1) >> sdp->sd_sb.sb_bsize_shift;
next = (next + 1) << sdp->sd_sb.sb_bsize_shift;
@@ -833,13 +824,15 @@
if (mode & ~FALLOC_FL_KEEP_SIZE)
return -EOPNOTSUPP;
- offset = (offset >> sdp->sd_sb.sb_bsize_shift) <<
- sdp->sd_sb.sb_bsize_shift;
+ offset &= bsize_mask;
len = next - offset;
bytes = sdp->sd_max_rg_data * sdp->sd_sb.sb_bsize / 2;
if (!bytes)
bytes = UINT_MAX;
+ bytes &= bsize_mask;
+ if (bytes == 0)
+ bytes = sdp->sd_sb.sb_bsize;
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &ip->i_gh);
error = gfs2_glock_nq(&ip->i_gh);
@@ -870,6 +863,9 @@
if (error) {
if (error == -ENOSPC && bytes > sdp->sd_sb.sb_bsize) {
bytes >>= 1;
+ bytes &= bsize_mask;
+ if (bytes == 0)
+ bytes = sdp->sd_sb.sb_bsize;
goto retry;
}
goto out_qunlock;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 7a4fb63..a2a6abb 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -143,14 +143,9 @@
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
- /* assert_spin_locked(&gl->gl_spin); */
-
if (gl->gl_state == LM_ST_UNLOCKED)
return 0;
- if (test_bit(GLF_LFLUSH, &gl->gl_flags))
- return 0;
- if ((gl->gl_name.ln_type != LM_TYPE_INODE) &&
- !list_empty(&gl->gl_holders))
+ if (!list_empty(&gl->gl_holders))
return 0;
if (glops->go_demote_ok)
return glops->go_demote_ok(gl);
@@ -158,6 +153,31 @@
}
+void gfs2_glock_add_to_lru(struct gfs2_glock *gl)
+{
+ spin_lock(&lru_lock);
+
+ if (!list_empty(&gl->gl_lru))
+ list_del_init(&gl->gl_lru);
+ else
+ atomic_inc(&lru_count);
+
+ list_add_tail(&gl->gl_lru, &lru_list);
+ set_bit(GLF_LRU, &gl->gl_flags);
+ spin_unlock(&lru_lock);
+}
+
+static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
+{
+ spin_lock(&lru_lock);
+ if (!list_empty(&gl->gl_lru)) {
+ list_del_init(&gl->gl_lru);
+ atomic_dec(&lru_count);
+ clear_bit(GLF_LRU, &gl->gl_flags);
+ }
+ spin_unlock(&lru_lock);
+}
+
/**
* __gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
* @gl: the glock
@@ -168,24 +188,8 @@
static void __gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
{
- if (demote_ok(gl)) {
- spin_lock(&lru_lock);
-
- if (!list_empty(&gl->gl_lru))
- list_del_init(&gl->gl_lru);
- else
- atomic_inc(&lru_count);
-
- list_add_tail(&gl->gl_lru, &lru_list);
- spin_unlock(&lru_lock);
- }
-}
-
-void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
-{
- spin_lock(&gl->gl_spin);
- __gfs2_glock_schedule_for_reclaim(gl);
- spin_unlock(&gl->gl_spin);
+ if (demote_ok(gl))
+ gfs2_glock_add_to_lru(gl);
}
/**
@@ -217,12 +221,7 @@
spin_lock_bucket(gl->gl_hash);
hlist_bl_del_rcu(&gl->gl_list);
spin_unlock_bucket(gl->gl_hash);
- spin_lock(&lru_lock);
- if (!list_empty(&gl->gl_lru)) {
- list_del_init(&gl->gl_lru);
- atomic_dec(&lru_count);
- }
- spin_unlock(&lru_lock);
+ gfs2_glock_remove_from_lru(gl);
GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
trace_gfs2_glock_put(gl);
@@ -542,11 +541,6 @@
clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
gfs2_glock_hold(gl);
- if (target != LM_ST_UNLOCKED && (gl->gl_state == LM_ST_SHARED ||
- gl->gl_state == LM_ST_DEFERRED) &&
- !(lck_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
- lck_flags |= LM_FLAG_TRY_1CB;
-
if (sdp->sd_lockstruct.ls_ops->lm_lock) {
/* lock_dlm */
ret = sdp->sd_lockstruct.ls_ops->lm_lock(gl, target, lck_flags);
@@ -648,7 +642,7 @@
/* Note: Unsafe to dereference ip as we don't hold right refs/locks */
if (ip)
- inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+ inode = gfs2_ilookup(sdp->sd_vfs, no_addr, 1);
else
inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
if (inode && !IS_ERR(inode)) {
@@ -1025,6 +1019,9 @@
if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
return -EIO;
+ if (test_bit(GLF_LRU, &gl->gl_flags))
+ gfs2_glock_remove_from_lru(gl);
+
spin_lock(&gl->gl_spin);
add_to_queue(gh);
if ((LM_FLAG_NOEXP & gh->gh_flags) &&
@@ -1082,7 +1079,8 @@
!test_bit(GLF_DEMOTE, &gl->gl_flags))
fast_path = 1;
}
- __gfs2_glock_schedule_for_reclaim(gl);
+ if (!test_bit(GLF_LFLUSH, &gl->gl_flags))
+ __gfs2_glock_schedule_for_reclaim(gl);
trace_gfs2_glock_queue(gh, 0);
spin_unlock(&gl->gl_spin);
if (likely(fast_path))
@@ -1365,6 +1363,7 @@
while(nr && !list_empty(&lru_list)) {
gl = list_entry(lru_list.next, struct gfs2_glock, gl_lru);
list_del_init(&gl->gl_lru);
+ clear_bit(GLF_LRU, &gl->gl_flags);
atomic_dec(&lru_count);
/* Test for being demotable */
@@ -1387,6 +1386,7 @@
}
nr_skipped++;
list_add(&gl->gl_lru, &skipped);
+ set_bit(GLF_LRU, &gl->gl_flags);
}
list_splice(&skipped, &lru_list);
atomic_add(nr_skipped, &lru_count);
@@ -1459,12 +1459,7 @@
static void clear_glock(struct gfs2_glock *gl)
{
- spin_lock(&lru_lock);
- if (!list_empty(&gl->gl_lru)) {
- list_del_init(&gl->gl_lru);
- atomic_dec(&lru_count);
- }
- spin_unlock(&lru_lock);
+ gfs2_glock_remove_from_lru(gl);
spin_lock(&gl->gl_spin);
if (gl->gl_state != LM_ST_UNLOCKED)
@@ -1599,9 +1594,11 @@
return 0;
}
-static const char *gflags2str(char *buf, const unsigned long *gflags)
+static const char *gflags2str(char *buf, const struct gfs2_glock *gl)
{
+ const unsigned long *gflags = &gl->gl_flags;
char *p = buf;
+
if (test_bit(GLF_LOCK, gflags))
*p++ = 'l';
if (test_bit(GLF_DEMOTE, gflags))
@@ -1624,6 +1621,10 @@
*p++ = 'F';
if (test_bit(GLF_QUEUED, gflags))
*p++ = 'q';
+ if (test_bit(GLF_LRU, gflags))
+ *p++ = 'L';
+ if (gl->gl_object)
+ *p++ = 'o';
*p = 0;
return buf;
}
@@ -1658,14 +1659,15 @@
dtime *= 1000000/HZ; /* demote time in uSec */
if (!test_bit(GLF_DEMOTE, &gl->gl_flags))
dtime = 0;
- gfs2_print_dbg(seq, "G: s:%s n:%u/%llx f:%s t:%s d:%s/%llu a:%d r:%d\n",
+ gfs2_print_dbg(seq, "G: s:%s n:%u/%llx f:%s t:%s d:%s/%llu a:%d v:%d r:%d\n",
state2str(gl->gl_state),
gl->gl_name.ln_type,
(unsigned long long)gl->gl_name.ln_number,
- gflags2str(gflags_buf, &gl->gl_flags),
+ gflags2str(gflags_buf, gl),
state2str(gl->gl_target),
state2str(gl->gl_demote_state), dtime,
atomic_read(&gl->gl_ail_count),
+ atomic_read(&gl->gl_revokes),
atomic_read(&gl->gl_ref));
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index aea1606..6b2f757 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -225,11 +225,10 @@
extern void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state);
extern void gfs2_glock_complete(struct gfs2_glock *gl, int ret);
-extern void gfs2_reclaim_glock(struct gfs2_sbd *sdp);
extern void gfs2_gl_hash_clear(struct gfs2_sbd *sdp);
extern void gfs2_glock_finish_truncate(struct gfs2_inode *ip);
extern void gfs2_glock_thaw(struct gfs2_sbd *sdp);
-extern void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl);
+extern void gfs2_glock_add_to_lru(struct gfs2_glock *gl);
extern void gfs2_glock_free(struct gfs2_glock *gl);
extern int __init gfs2_glock_init(void);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 25eeb2b..8ef70f4 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -28,33 +28,18 @@
#include "trans.h"
/**
- * ail_empty_gl - remove all buffers for a given lock from the AIL
+ * __gfs2_ail_flush - remove all buffers for a given lock from the AIL
* @gl: the glock
*
* None of the buffers should be dirty, locked, or pinned.
*/
-static void gfs2_ail_empty_gl(struct gfs2_glock *gl)
+static void __gfs2_ail_flush(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
struct list_head *head = &gl->gl_ail_list;
struct gfs2_bufdata *bd;
struct buffer_head *bh;
- struct gfs2_trans tr;
-
- memset(&tr, 0, sizeof(tr));
- tr.tr_revokes = atomic_read(&gl->gl_ail_count);
-
- if (!tr.tr_revokes)
- return;
-
- /* A shortened, inline version of gfs2_trans_begin() */
- tr.tr_reserved = 1 + gfs2_struct2blk(sdp, tr.tr_revokes, sizeof(u64));
- tr.tr_ip = (unsigned long)__builtin_return_address(0);
- INIT_LIST_HEAD(&tr.tr_list_buf);
- gfs2_log_reserve(sdp, tr.tr_reserved);
- BUG_ON(current->journal_info);
- current->journal_info = &tr;
spin_lock(&sdp->sd_ail_lock);
while (!list_empty(head)) {
@@ -76,7 +61,47 @@
}
gfs2_assert_withdraw(sdp, !atomic_read(&gl->gl_ail_count));
spin_unlock(&sdp->sd_ail_lock);
+}
+
+static void gfs2_ail_empty_gl(struct gfs2_glock *gl)
+{
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ struct gfs2_trans tr;
+
+ memset(&tr, 0, sizeof(tr));
+ tr.tr_revokes = atomic_read(&gl->gl_ail_count);
+
+ if (!tr.tr_revokes)
+ return;
+
+ /* A shortened, inline version of gfs2_trans_begin() */
+ tr.tr_reserved = 1 + gfs2_struct2blk(sdp, tr.tr_revokes, sizeof(u64));
+ tr.tr_ip = (unsigned long)__builtin_return_address(0);
+ INIT_LIST_HEAD(&tr.tr_list_buf);
+ gfs2_log_reserve(sdp, tr.tr_reserved);
+ BUG_ON(current->journal_info);
+ current->journal_info = &tr;
+
+ __gfs2_ail_flush(gl);
+
+ gfs2_trans_end(sdp);
+ gfs2_log_flush(sdp, NULL);
+}
+
+void gfs2_ail_flush(struct gfs2_glock *gl)
+{
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ unsigned int revokes = atomic_read(&gl->gl_ail_count);
+ int ret;
+
+ if (!revokes)
+ return;
+
+ ret = gfs2_trans_begin(sdp, 0, revokes);
+ if (ret)
+ return;
+ __gfs2_ail_flush(gl);
gfs2_trans_end(sdp);
gfs2_log_flush(sdp, NULL);
}
@@ -227,6 +252,119 @@
}
/**
+ * gfs2_set_nlink - Set the inode's link count based on on-disk info
+ * @inode: The inode in question
+ * @nlink: The link count
+ *
+ * If the link count has hit zero, it must never be raised, whatever the
+ * on-disk inode might say. When new struct inodes are created the link
+ * count is set to 1, so that we can safely use this test even when reading
+ * in on disk information for the first time.
+ */
+
+static void gfs2_set_nlink(struct inode *inode, u32 nlink)
+{
+ /*
+ * We will need to review setting the nlink count here in the
+ * light of the forthcoming ro bind mount work. This is a reminder
+ * to do that.
+ */
+ if ((inode->i_nlink != nlink) && (inode->i_nlink != 0)) {
+ if (nlink == 0)
+ clear_nlink(inode);
+ else
+ inode->i_nlink = nlink;
+ }
+}
+
+static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
+{
+ const struct gfs2_dinode *str = buf;
+ struct timespec atime;
+ u16 height, depth;
+
+ if (unlikely(ip->i_no_addr != be64_to_cpu(str->di_num.no_addr)))
+ goto corrupt;
+ ip->i_no_formal_ino = be64_to_cpu(str->di_num.no_formal_ino);
+ ip->i_inode.i_mode = be32_to_cpu(str->di_mode);
+ ip->i_inode.i_rdev = 0;
+ switch (ip->i_inode.i_mode & S_IFMT) {
+ case S_IFBLK:
+ case S_IFCHR:
+ ip->i_inode.i_rdev = MKDEV(be32_to_cpu(str->di_major),
+ be32_to_cpu(str->di_minor));
+ break;
+ };
+
+ ip->i_inode.i_uid = be32_to_cpu(str->di_uid);
+ ip->i_inode.i_gid = be32_to_cpu(str->di_gid);
+ gfs2_set_nlink(&ip->i_inode, be32_to_cpu(str->di_nlink));
+ i_size_write(&ip->i_inode, be64_to_cpu(str->di_size));
+ gfs2_set_inode_blocks(&ip->i_inode, be64_to_cpu(str->di_blocks));
+ atime.tv_sec = be64_to_cpu(str->di_atime);
+ atime.tv_nsec = be32_to_cpu(str->di_atime_nsec);
+ if (timespec_compare(&ip->i_inode.i_atime, &atime) < 0)
+ ip->i_inode.i_atime = atime;
+ ip->i_inode.i_mtime.tv_sec = be64_to_cpu(str->di_mtime);
+ ip->i_inode.i_mtime.tv_nsec = be32_to_cpu(str->di_mtime_nsec);
+ ip->i_inode.i_ctime.tv_sec = be64_to_cpu(str->di_ctime);
+ ip->i_inode.i_ctime.tv_nsec = be32_to_cpu(str->di_ctime_nsec);
+
+ ip->i_goal = be64_to_cpu(str->di_goal_meta);
+ ip->i_generation = be64_to_cpu(str->di_generation);
+
+ ip->i_diskflags = be32_to_cpu(str->di_flags);
+ gfs2_set_inode_flags(&ip->i_inode);
+ height = be16_to_cpu(str->di_height);
+ if (unlikely(height > GFS2_MAX_META_HEIGHT))
+ goto corrupt;
+ ip->i_height = (u8)height;
+
+ depth = be16_to_cpu(str->di_depth);
+ if (unlikely(depth > GFS2_DIR_MAX_DEPTH))
+ goto corrupt;
+ ip->i_depth = (u8)depth;
+ ip->i_entries = be32_to_cpu(str->di_entries);
+
+ ip->i_eattr = be64_to_cpu(str->di_eattr);
+ if (S_ISREG(ip->i_inode.i_mode))
+ gfs2_set_aops(&ip->i_inode);
+
+ return 0;
+corrupt:
+ gfs2_consist_inode(ip);
+ return -EIO;
+}
+
+/**
+ * gfs2_inode_refresh - Refresh the incore copy of the dinode
+ * @ip: The GFS2 inode
+ *
+ * Returns: errno
+ */
+
+int gfs2_inode_refresh(struct gfs2_inode *ip)
+{
+ struct buffer_head *dibh;
+ int error;
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error)
+ return error;
+
+ if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), dibh, GFS2_METATYPE_DI)) {
+ brelse(dibh);
+ return -EIO;
+ }
+
+ error = gfs2_dinode_in(ip, dibh->b_data);
+ brelse(dibh);
+ clear_bit(GIF_INVALID, &ip->i_flags);
+
+ return error;
+}
+
+/**
* inode_go_lock - operation done after an inode lock is locked by a process
* @gl: the glock
* @flags:
diff --git a/fs/gfs2/glops.h b/fs/gfs2/glops.h
index b3aa2e3..6fce409 100644
--- a/fs/gfs2/glops.h
+++ b/fs/gfs2/glops.h
@@ -23,4 +23,6 @@
extern const struct gfs2_glock_operations gfs2_journal_glops;
extern const struct gfs2_glock_operations *gfs2_glops_list[];
+extern void gfs2_ail_flush(struct gfs2_glock *gl);
+
#endif /* __GLOPS_DOT_H__ */
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 870a89d..0a064e9 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -20,7 +20,6 @@
#define DIO_WAIT 0x00000010
#define DIO_METADATA 0x00000020
-#define DIO_ALL 0x00000100
struct gfs2_log_operations;
struct gfs2_log_element;
@@ -200,6 +199,8 @@
GLF_INITIAL = 10,
GLF_FROZEN = 11,
GLF_QUEUED = 12,
+ GLF_LRU = 13,
+ GLF_OBJECT = 14, /* Used only for tracing */
};
struct gfs2_glock {
@@ -234,6 +235,7 @@
struct list_head gl_ail_list;
atomic_t gl_ail_count;
+ atomic_t gl_revokes;
struct delayed_work gl_work;
struct work_struct gl_delete;
struct rcu_head gl_rcu;
@@ -374,8 +376,6 @@
unsigned int ai_first;
struct list_head ai_ail1_list;
struct list_head ai_ail2_list;
-
- u64 ai_sync_gen;
};
struct gfs2_journal_extent {
@@ -488,7 +488,6 @@
char sb_lockproto[GFS2_LOCKNAME_LEN];
char sb_locktable[GFS2_LOCKNAME_LEN];
- u8 sb_uuid[16];
};
/*
@@ -654,7 +653,6 @@
spinlock_t sd_ail_lock;
struct list_head sd_ail1_list;
struct list_head sd_ail2_list;
- u64 sd_ail_sync_gen;
/* Replay stuff */
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 9134dcb..03e0c52 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -1,23 +1,25 @@
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License version 2.
*/
-#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
+#include <linux/namei.h>
+#include <linux/mm.h>
+#include <linux/xattr.h>
#include <linux/posix_acl.h>
-#include <linux/sort.h>
#include <linux/gfs2_ondisk.h>
#include <linux/crc32.h>
+#include <linux/fiemap.h>
#include <linux/security.h>
-#include <linux/time.h>
+#include <asm/uaccess.h>
#include "gfs2.h"
#include "incore.h"
@@ -26,19 +28,14 @@
#include "dir.h"
#include "xattr.h"
#include "glock.h"
-#include "glops.h"
#include "inode.h"
-#include "log.h"
#include "meta_io.h"
#include "quota.h"
#include "rgrp.h"
#include "trans.h"
#include "util.h"
-
-struct gfs2_inum_range_host {
- u64 ir_start;
- u64 ir_length;
-};
+#include "super.h"
+#include "glops.h"
struct gfs2_skip_data {
u64 no_addr;
@@ -74,14 +71,14 @@
return 0;
}
-struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr)
+struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr, int non_block)
{
unsigned long hash = (unsigned long)no_addr;
struct gfs2_skip_data data;
data.no_addr = no_addr;
data.skipped = 0;
- data.non_block = 0;
+ data.non_block = non_block;
return ilookup5(sb, hash, iget_test, &data);
}
@@ -248,203 +245,6 @@
goto fail;
}
-static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
-{
- const struct gfs2_dinode *str = buf;
- struct timespec atime;
- u16 height, depth;
-
- if (unlikely(ip->i_no_addr != be64_to_cpu(str->di_num.no_addr)))
- goto corrupt;
- ip->i_no_formal_ino = be64_to_cpu(str->di_num.no_formal_ino);
- ip->i_inode.i_mode = be32_to_cpu(str->di_mode);
- ip->i_inode.i_rdev = 0;
- switch (ip->i_inode.i_mode & S_IFMT) {
- case S_IFBLK:
- case S_IFCHR:
- ip->i_inode.i_rdev = MKDEV(be32_to_cpu(str->di_major),
- be32_to_cpu(str->di_minor));
- break;
- };
-
- ip->i_inode.i_uid = be32_to_cpu(str->di_uid);
- ip->i_inode.i_gid = be32_to_cpu(str->di_gid);
- /*
- * We will need to review setting the nlink count here in the
- * light of the forthcoming ro bind mount work. This is a reminder
- * to do that.
- */
- ip->i_inode.i_nlink = be32_to_cpu(str->di_nlink);
- i_size_write(&ip->i_inode, be64_to_cpu(str->di_size));
- gfs2_set_inode_blocks(&ip->i_inode, be64_to_cpu(str->di_blocks));
- atime.tv_sec = be64_to_cpu(str->di_atime);
- atime.tv_nsec = be32_to_cpu(str->di_atime_nsec);
- if (timespec_compare(&ip->i_inode.i_atime, &atime) < 0)
- ip->i_inode.i_atime = atime;
- ip->i_inode.i_mtime.tv_sec = be64_to_cpu(str->di_mtime);
- ip->i_inode.i_mtime.tv_nsec = be32_to_cpu(str->di_mtime_nsec);
- ip->i_inode.i_ctime.tv_sec = be64_to_cpu(str->di_ctime);
- ip->i_inode.i_ctime.tv_nsec = be32_to_cpu(str->di_ctime_nsec);
-
- ip->i_goal = be64_to_cpu(str->di_goal_meta);
- ip->i_generation = be64_to_cpu(str->di_generation);
-
- ip->i_diskflags = be32_to_cpu(str->di_flags);
- gfs2_set_inode_flags(&ip->i_inode);
- height = be16_to_cpu(str->di_height);
- if (unlikely(height > GFS2_MAX_META_HEIGHT))
- goto corrupt;
- ip->i_height = (u8)height;
-
- depth = be16_to_cpu(str->di_depth);
- if (unlikely(depth > GFS2_DIR_MAX_DEPTH))
- goto corrupt;
- ip->i_depth = (u8)depth;
- ip->i_entries = be32_to_cpu(str->di_entries);
-
- ip->i_eattr = be64_to_cpu(str->di_eattr);
- if (S_ISREG(ip->i_inode.i_mode))
- gfs2_set_aops(&ip->i_inode);
-
- return 0;
-corrupt:
- if (gfs2_consist_inode(ip))
- gfs2_dinode_print(ip);
- return -EIO;
-}
-
-/**
- * gfs2_inode_refresh - Refresh the incore copy of the dinode
- * @ip: The GFS2 inode
- *
- * Returns: errno
- */
-
-int gfs2_inode_refresh(struct gfs2_inode *ip)
-{
- struct buffer_head *dibh;
- int error;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (error)
- return error;
-
- if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), dibh, GFS2_METATYPE_DI)) {
- brelse(dibh);
- return -EIO;
- }
-
- error = gfs2_dinode_in(ip, dibh->b_data);
- brelse(dibh);
- clear_bit(GIF_INVALID, &ip->i_flags);
-
- return error;
-}
-
-int gfs2_dinode_dealloc(struct gfs2_inode *ip)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct gfs2_alloc *al;
- struct gfs2_rgrpd *rgd;
- int error;
-
- if (gfs2_get_inode_blocks(&ip->i_inode) != 1) {
- if (gfs2_consist_inode(ip))
- gfs2_dinode_print(ip);
- return -EIO;
- }
-
- al = gfs2_alloc_get(ip);
- if (!al)
- return -ENOMEM;
-
- error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
- if (error)
- goto out;
-
- error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
- if (error)
- goto out_qs;
-
- rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
- if (!rgd) {
- gfs2_consist_inode(ip);
- error = -EIO;
- goto out_rindex_relse;
- }
-
- error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
- &al->al_rgd_gh);
- if (error)
- goto out_rindex_relse;
-
- error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_STATFS + RES_QUOTA, 1);
- if (error)
- goto out_rg_gunlock;
-
- set_bit(GLF_DIRTY, &ip->i_gl->gl_flags);
- set_bit(GLF_LFLUSH, &ip->i_gl->gl_flags);
-
- gfs2_free_di(rgd, ip);
-
- gfs2_trans_end(sdp);
-
-out_rg_gunlock:
- gfs2_glock_dq_uninit(&al->al_rgd_gh);
-out_rindex_relse:
- gfs2_glock_dq_uninit(&al->al_ri_gh);
-out_qs:
- gfs2_quota_unhold(ip);
-out:
- gfs2_alloc_put(ip);
- return error;
-}
-
-/**
- * gfs2_change_nlink - Change nlink count on inode
- * @ip: The GFS2 inode
- * @diff: The change in the nlink count required
- *
- * Returns: errno
- */
-int gfs2_change_nlink(struct gfs2_inode *ip, int diff)
-{
- struct buffer_head *dibh;
- u32 nlink;
- int error;
-
- BUG_ON(diff != 1 && diff != -1);
- nlink = ip->i_inode.i_nlink + diff;
-
- /* If we are reducing the nlink count, but the new value ends up being
- bigger than the old one, we must have underflowed. */
- if (diff < 0 && nlink > ip->i_inode.i_nlink) {
- if (gfs2_consist_inode(ip))
- gfs2_dinode_print(ip);
- return -EIO;
- }
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (error)
- return error;
-
- if (diff > 0)
- inc_nlink(&ip->i_inode);
- else
- drop_nlink(&ip->i_inode);
-
- ip->i_inode.i_ctime = CURRENT_TIME;
-
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- mark_inode_dirty(&ip->i_inode);
-
- if (ip->i_inode.i_nlink == 0)
- gfs2_unlink_di(&ip->i_inode); /* mark inode unlinked */
-
- return error;
-}
struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
{
@@ -543,7 +343,7 @@
/* Don't create entries in an unlinked directory */
if (!dip->i_inode.i_nlink)
- return -EPERM;
+ return -ENOENT;
error = gfs2_dir_check(&dip->i_inode, name, NULL);
switch (error) {
@@ -613,21 +413,44 @@
return error;
}
+static void gfs2_init_dir(struct buffer_head *dibh,
+ const struct gfs2_inode *parent)
+{
+ struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+ struct gfs2_dirent *dent = (struct gfs2_dirent *)(di+1);
+
+ gfs2_qstr2dirent(&gfs2_qdot, GFS2_DIRENT_SIZE(gfs2_qdot.len), dent);
+ dent->de_inum = di->di_num; /* already GFS2 endian */
+ dent->de_type = cpu_to_be16(DT_DIR);
+
+ dent = (struct gfs2_dirent *)((char*)dent + GFS2_DIRENT_SIZE(1));
+ gfs2_qstr2dirent(&gfs2_qdotdot, dibh->b_size - GFS2_DIRENT_SIZE(1) - sizeof(struct gfs2_dinode), dent);
+ gfs2_inum_out(parent, dent);
+ dent->de_type = cpu_to_be16(DT_DIR);
+
+}
+
/**
* init_dinode - Fill in a new dinode structure
- * @dip: the directory this inode is being created in
+ * @dip: The directory this inode is being created in
* @gl: The glock covering the new inode
- * @inum: the inode number
- * @mode: the file permissions
- * @uid:
- * @gid:
+ * @inum: The inode number
+ * @mode: The file permissions
+ * @uid: The uid of the new inode
+ * @gid: The gid of the new inode
+ * @generation: The generation number of the new inode
+ * @dev: The device number (if a device node)
+ * @symname: The symlink destination (if a symlink)
+ * @size: The inode size (ignored for directories)
+ * @bhp: The buffer head (returned to caller)
*
*/
static void init_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
const struct gfs2_inum_host *inum, unsigned int mode,
unsigned int uid, unsigned int gid,
- const u64 *generation, dev_t dev, struct buffer_head **bhp)
+ const u64 *generation, dev_t dev, const char *symname,
+ unsigned size, struct buffer_head **bhp)
{
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
struct gfs2_dinode *di;
@@ -646,7 +469,7 @@
di->di_uid = cpu_to_be32(uid);
di->di_gid = cpu_to_be32(gid);
di->di_nlink = 0;
- di->di_size = 0;
+ di->di_size = cpu_to_be64(size);
di->di_blocks = cpu_to_be64(1);
di->di_atime = di->di_mtime = di->di_ctime = cpu_to_be64(tv.tv_sec);
di->di_major = cpu_to_be32(MAJOR(dev));
@@ -654,16 +477,6 @@
di->di_goal_meta = di->di_goal_data = cpu_to_be64(inum->no_addr);
di->di_generation = cpu_to_be64(*generation);
di->di_flags = 0;
-
- if (S_ISREG(mode)) {
- if ((dip->i_diskflags & GFS2_DIF_INHERIT_JDATA) ||
- gfs2_tune_get(sdp, gt_new_files_jdata))
- di->di_flags |= cpu_to_be32(GFS2_DIF_JDATA);
- } else if (S_ISDIR(mode)) {
- di->di_flags |= cpu_to_be32(dip->i_diskflags &
- GFS2_DIF_INHERIT_JDATA);
- }
-
di->__pad1 = 0;
di->di_payload_format = cpu_to_be32(S_ISDIR(mode) ? GFS2_FORMAT_DE : 0);
di->di_height = 0;
@@ -677,7 +490,26 @@
di->di_mtime_nsec = cpu_to_be32(tv.tv_nsec);
di->di_ctime_nsec = cpu_to_be32(tv.tv_nsec);
memset(&di->di_reserved, 0, sizeof(di->di_reserved));
-
+
+ switch(mode & S_IFMT) {
+ case S_IFREG:
+ if ((dip->i_diskflags & GFS2_DIF_INHERIT_JDATA) ||
+ gfs2_tune_get(sdp, gt_new_files_jdata))
+ di->di_flags |= cpu_to_be32(GFS2_DIF_JDATA);
+ break;
+ case S_IFDIR:
+ di->di_flags |= cpu_to_be32(dip->i_diskflags &
+ GFS2_DIF_INHERIT_JDATA);
+ di->di_flags |= cpu_to_be32(GFS2_DIF_JDATA);
+ di->di_size = cpu_to_be64(sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode));
+ di->di_entries = cpu_to_be32(2);
+ gfs2_init_dir(dibh, dip);
+ break;
+ case S_IFLNK:
+ memcpy(dibh->b_data + sizeof(struct gfs2_dinode), symname, size);
+ break;
+ }
+
set_buffer_uptodate(dibh);
*bhp = dibh;
@@ -685,7 +517,8 @@
static int make_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
unsigned int mode, const struct gfs2_inum_host *inum,
- const u64 *generation, dev_t dev, struct buffer_head **bhp)
+ const u64 *generation, dev_t dev, const char *symname,
+ unsigned int size, struct buffer_head **bhp)
{
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
unsigned int uid, gid;
@@ -707,7 +540,7 @@
if (error)
goto out_quota;
- init_dinode(dip, gl, inum, mode, uid, gid, generation, dev, bhp);
+ init_dinode(dip, gl, inum, mode, uid, gid, generation, dev, symname, size, bhp);
gfs2_quota_change(dip, +1, uid, gid);
gfs2_trans_end(sdp);
@@ -761,14 +594,16 @@
goto fail_quota_locks;
}
- error = gfs2_dir_add(&dip->i_inode, name, ip, IF2DT(ip->i_inode.i_mode));
+ error = gfs2_dir_add(&dip->i_inode, name, ip);
if (error)
goto fail_end_trans;
error = gfs2_meta_inode_buffer(ip, &dibh);
if (error)
goto fail_end_trans;
- ip->i_inode.i_nlink = 1;
+ inc_nlink(&ip->i_inode);
+ if (S_ISDIR(ip->i_inode.i_mode))
+ inc_nlink(&ip->i_inode);
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
@@ -815,27 +650,25 @@
}
/**
- * gfs2_createi - Create a new inode
- * @ghs: An array of two holders
- * @name: The name of the new file
- * @mode: the permissions on the new inode
+ * gfs2_create_inode - Create a new inode
+ * @dir: The parent directory
+ * @dentry: The new dentry
+ * @mode: The permissions on the new inode
+ * @dev: For device nodes, this is the device number
+ * @symname: For symlinks, this is the link destination
+ * @size: The initial size of the inode (ignored for directories)
*
- * @ghs[0] is an initialized holder for the directory
- * @ghs[1] is the holder for the inode lock
- *
- * If the return value is not NULL, the glocks on both the directory and the new
- * file are held. A transaction has been started and an inplace reservation
- * is held, as well.
- *
- * Returns: An inode
+ * Returns: 0 on success, or error code
*/
-struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
- unsigned int mode, dev_t dev)
+static int gfs2_create_inode(struct inode *dir, struct dentry *dentry,
+ unsigned int mode, dev_t dev, const char *symname,
+ unsigned int size)
{
+ const struct qstr *name = &dentry->d_name;
+ struct gfs2_holder ghs[2];
struct inode *inode = NULL;
- struct gfs2_inode *dip = ghs->gh_gl->gl_object;
- struct inode *dir = &dip->i_inode;
+ struct gfs2_inode *dip = GFS2_I(dir);
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
struct gfs2_inum_host inum = { .no_addr = 0, .no_formal_ino = 0 };
int error;
@@ -843,10 +676,9 @@
struct buffer_head *bh = NULL;
if (!name->len || name->len > GFS2_FNAMESIZE)
- return ERR_PTR(-ENAMETOOLONG);
+ return -ENAMETOOLONG;
- gfs2_holder_reinit(LM_ST_EXCLUSIVE, 0, ghs);
- error = gfs2_glock_nq(ghs);
+ error = gfs2_glock_nq_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
if (error)
goto fail;
@@ -864,7 +696,7 @@
if (error)
goto fail_gunlock;
- error = make_dinode(dip, ghs[1].gh_gl, mode, &inum, &generation, dev, &bh);
+ error = make_dinode(dip, ghs[1].gh_gl, mode, &inum, &generation, dev, symname, size, &bh);
if (error)
goto fail_gunlock2;
@@ -891,18 +723,852 @@
if (bh)
brelse(bh);
- return inode;
+
+ gfs2_trans_end(sdp);
+ if (dip->i_alloc->al_rgd)
+ gfs2_inplace_release(dip);
+ gfs2_quota_unlock(dip);
+ gfs2_alloc_put(dip);
+ gfs2_glock_dq_uninit_m(2, ghs);
+ mark_inode_dirty(inode);
+ d_instantiate(dentry, inode);
+ return 0;
fail_gunlock2:
gfs2_glock_dq_uninit(ghs + 1);
if (inode && !IS_ERR(inode))
iput(inode);
fail_gunlock:
- gfs2_glock_dq(ghs);
+ gfs2_glock_dq_uninit(ghs);
fail:
if (bh)
brelse(bh);
- return ERR_PTR(error);
+ return error;
+}
+
+/**
+ * gfs2_create - Create a file
+ * @dir: The directory in which to create the file
+ * @dentry: The dentry of the new file
+ * @mode: The mode of the new file
+ *
+ * Returns: errno
+ */
+
+static int gfs2_create(struct inode *dir, struct dentry *dentry,
+ int mode, struct nameidata *nd)
+{
+ struct inode *inode;
+ int ret;
+
+ for (;;) {
+ ret = gfs2_create_inode(dir, dentry, S_IFREG | mode, 0, NULL, 0);
+ if (ret != -EEXIST || (nd && (nd->flags & LOOKUP_EXCL)))
+ return ret;
+
+ inode = gfs2_lookupi(dir, &dentry->d_name, 0);
+ if (inode) {
+ if (!IS_ERR(inode))
+ break;
+ return PTR_ERR(inode);
+ }
+ }
+
+ d_instantiate(dentry, inode);
+ return 0;
+}
+
+/**
+ * gfs2_lookup - Look up a filename in a directory and return its inode
+ * @dir: The directory inode
+ * @dentry: The dentry of the new inode
+ * @nd: passed from Linux VFS, ignored by us
+ *
+ * Called by the VFS layer. Lock dir and call gfs2_lookupi()
+ *
+ * Returns: errno
+ */
+
+static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
+ struct nameidata *nd)
+{
+ struct inode *inode = NULL;
+
+ inode = gfs2_lookupi(dir, &dentry->d_name, 0);
+ if (inode && IS_ERR(inode))
+ return ERR_CAST(inode);
+
+ if (inode) {
+ struct gfs2_glock *gl = GFS2_I(inode)->i_gl;
+ struct gfs2_holder gh;
+ int error;
+ error = gfs2_glock_nq_init(gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+ if (error) {
+ iput(inode);
+ return ERR_PTR(error);
+ }
+ gfs2_glock_dq_uninit(&gh);
+ return d_splice_alias(inode, dentry);
+ }
+ d_add(dentry, inode);
+
+ return NULL;
+}
+
+/**
+ * gfs2_link - Link to a file
+ * @old_dentry: The inode to link
+ * @dir: Add link to this directory
+ * @dentry: The name of the link
+ *
+ * Link the inode in "old_dentry" into the directory "dir" with the
+ * name in "dentry".
+ *
+ * Returns: errno
+ */
+
+static int gfs2_link(struct dentry *old_dentry, struct inode *dir,
+ struct dentry *dentry)
+{
+ struct gfs2_inode *dip = GFS2_I(dir);
+ struct gfs2_sbd *sdp = GFS2_SB(dir);
+ struct inode *inode = old_dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder ghs[2];
+ struct buffer_head *dibh;
+ int alloc_required;
+ int error;
+
+ if (S_ISDIR(inode->i_mode))
+ return -EPERM;
+
+ gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
+
+ error = gfs2_glock_nq(ghs); /* parent */
+ if (error)
+ goto out_parent;
+
+ error = gfs2_glock_nq(ghs + 1); /* child */
+ if (error)
+ goto out_child;
+
+ error = -ENOENT;
+ if (inode->i_nlink == 0)
+ goto out_gunlock;
+
+ error = gfs2_permission(dir, MAY_WRITE | MAY_EXEC, 0);
+ if (error)
+ goto out_gunlock;
+
+ error = gfs2_dir_check(dir, &dentry->d_name, NULL);
+ switch (error) {
+ case -ENOENT:
+ break;
+ case 0:
+ error = -EEXIST;
+ default:
+ goto out_gunlock;
+ }
+
+ error = -EINVAL;
+ if (!dip->i_inode.i_nlink)
+ goto out_gunlock;
+ error = -EFBIG;
+ if (dip->i_entries == (u32)-1)
+ goto out_gunlock;
+ error = -EPERM;
+ if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+ goto out_gunlock;
+ error = -EINVAL;
+ if (!ip->i_inode.i_nlink)
+ goto out_gunlock;
+ error = -EMLINK;
+ if (ip->i_inode.i_nlink == (u32)-1)
+ goto out_gunlock;
+
+ alloc_required = error = gfs2_diradd_alloc_required(dir, &dentry->d_name);
+ if (error < 0)
+ goto out_gunlock;
+ error = 0;
+
+ if (alloc_required) {
+ struct gfs2_alloc *al = gfs2_alloc_get(dip);
+ if (!al) {
+ error = -ENOMEM;
+ goto out_gunlock;
+ }
+
+ error = gfs2_quota_lock_check(dip);
+ if (error)
+ goto out_alloc;
+
+ al->al_requested = sdp->sd_max_dirres;
+
+ error = gfs2_inplace_reserve(dip);
+ if (error)
+ goto out_gunlock_q;
+
+ error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
+ gfs2_rg_blocks(al) +
+ 2 * RES_DINODE + RES_STATFS +
+ RES_QUOTA, 0);
+ if (error)
+ goto out_ipres;
+ } else {
+ error = gfs2_trans_begin(sdp, 2 * RES_DINODE + RES_LEAF, 0);
+ if (error)
+ goto out_ipres;
+ }
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error)
+ goto out_end_trans;
+
+ error = gfs2_dir_add(dir, &dentry->d_name, ip);
+ if (error)
+ goto out_brelse;
+
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ inc_nlink(&ip->i_inode);
+ ip->i_inode.i_ctime = CURRENT_TIME;
+ gfs2_dinode_out(ip, dibh->b_data);
+ mark_inode_dirty(&ip->i_inode);
+
+out_brelse:
+ brelse(dibh);
+out_end_trans:
+ gfs2_trans_end(sdp);
+out_ipres:
+ if (alloc_required)
+ gfs2_inplace_release(dip);
+out_gunlock_q:
+ if (alloc_required)
+ gfs2_quota_unlock(dip);
+out_alloc:
+ if (alloc_required)
+ gfs2_alloc_put(dip);
+out_gunlock:
+ gfs2_glock_dq(ghs + 1);
+out_child:
+ gfs2_glock_dq(ghs);
+out_parent:
+ gfs2_holder_uninit(ghs);
+ gfs2_holder_uninit(ghs + 1);
+ if (!error) {
+ ihold(inode);
+ d_instantiate(dentry, inode);
+ mark_inode_dirty(inode);
+ }
+ return error;
+}
+
+/*
+ * gfs2_unlink_ok - check to see that a inode is still in a directory
+ * @dip: the directory
+ * @name: the name of the file
+ * @ip: the inode
+ *
+ * Assumes that the lock on (at least) @dip is held.
+ *
+ * Returns: 0 if the parent/child relationship is correct, errno if it isn't
+ */
+
+static int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
+ const struct gfs2_inode *ip)
+{
+ int error;
+
+ if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
+ return -EPERM;
+
+ if ((dip->i_inode.i_mode & S_ISVTX) &&
+ dip->i_inode.i_uid != current_fsuid() &&
+ ip->i_inode.i_uid != current_fsuid() && !capable(CAP_FOWNER))
+ return -EPERM;
+
+ if (IS_APPEND(&dip->i_inode))
+ return -EPERM;
+
+ error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC, 0);
+ if (error)
+ return error;
+
+ error = gfs2_dir_check(&dip->i_inode, name, ip);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+/**
+ * gfs2_unlink_inode - Removes an inode from its parent dir and unlinks it
+ * @dip: The parent directory
+ * @name: The name of the entry in the parent directory
+ * @bh: The inode buffer for the inode to be removed
+ * @inode: The inode to be removed
+ *
+ * Called with all the locks and in a transaction. This will only be
+ * called for a directory after it has been checked to ensure it is empty.
+ *
+ * Returns: 0 on success, or an error
+ */
+
+static int gfs2_unlink_inode(struct gfs2_inode *dip,
+ const struct dentry *dentry,
+ struct buffer_head *bh)
+{
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ int error;
+
+ error = gfs2_dir_del(dip, dentry);
+ if (error)
+ return error;
+
+ ip->i_entries = 0;
+ inode->i_ctime = CURRENT_TIME;
+ if (S_ISDIR(inode->i_mode))
+ clear_nlink(inode);
+ else
+ drop_nlink(inode);
+ gfs2_trans_add_bh(ip->i_gl, bh, 1);
+ gfs2_dinode_out(ip, bh->b_data);
+ mark_inode_dirty(inode);
+ if (inode->i_nlink == 0)
+ gfs2_unlink_di(inode);
+ return 0;
+}
+
+
+/**
+ * gfs2_unlink - Unlink an inode (this does rmdir as well)
+ * @dir: The inode of the directory containing the inode to unlink
+ * @dentry: The file itself
+ *
+ * This routine uses the type of the inode as a flag to figure out
+ * whether this is an unlink or an rmdir.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_unlink(struct inode *dir, struct dentry *dentry)
+{
+ struct gfs2_inode *dip = GFS2_I(dir);
+ struct gfs2_sbd *sdp = GFS2_SB(dir);
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct buffer_head *bh;
+ struct gfs2_holder ghs[3];
+ struct gfs2_rgrpd *rgd;
+ struct gfs2_holder ri_gh;
+ int error;
+
+ error = gfs2_rindex_hold(sdp, &ri_gh);
+ if (error)
+ return error;
+
+ gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
+
+ rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
+ gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
+
+
+ error = gfs2_glock_nq(ghs); /* parent */
+ if (error)
+ goto out_parent;
+
+ error = gfs2_glock_nq(ghs + 1); /* child */
+ if (error)
+ goto out_child;
+
+ error = -ENOENT;
+ if (inode->i_nlink == 0)
+ goto out_rgrp;
+
+ if (S_ISDIR(inode->i_mode)) {
+ error = -ENOTEMPTY;
+ if (ip->i_entries > 2 || inode->i_nlink > 2)
+ goto out_rgrp;
+ }
+
+ error = gfs2_glock_nq(ghs + 2); /* rgrp */
+ if (error)
+ goto out_rgrp;
+
+ error = gfs2_unlink_ok(dip, &dentry->d_name, ip);
+ if (error)
+ goto out_gunlock;
+
+ error = gfs2_trans_begin(sdp, 2*RES_DINODE + 3*RES_LEAF + RES_RG_BIT, 0);
+ if (error)
+ goto out_gunlock;
+
+ error = gfs2_meta_inode_buffer(ip, &bh);
+ if (error)
+ goto out_end_trans;
+
+ error = gfs2_unlink_inode(dip, dentry, bh);
+ brelse(bh);
+
+out_end_trans:
+ gfs2_trans_end(sdp);
+out_gunlock:
+ gfs2_glock_dq(ghs + 2);
+out_rgrp:
+ gfs2_holder_uninit(ghs + 2);
+ gfs2_glock_dq(ghs + 1);
+out_child:
+ gfs2_holder_uninit(ghs + 1);
+ gfs2_glock_dq(ghs);
+out_parent:
+ gfs2_holder_uninit(ghs);
+ gfs2_glock_dq_uninit(&ri_gh);
+ return error;
+}
+
+/**
+ * gfs2_symlink - Create a symlink
+ * @dir: The directory to create the symlink in
+ * @dentry: The dentry to put the symlink in
+ * @symname: The thing which the link points to
+ *
+ * Returns: errno
+ */
+
+static int gfs2_symlink(struct inode *dir, struct dentry *dentry,
+ const char *symname)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(dir);
+ unsigned int size;
+
+ size = strlen(symname);
+ if (size > sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode) - 1)
+ return -ENAMETOOLONG;
+
+ return gfs2_create_inode(dir, dentry, S_IFLNK | S_IRWXUGO, 0, symname, size);
+}
+
+/**
+ * gfs2_mkdir - Make a directory
+ * @dir: The parent directory of the new one
+ * @dentry: The dentry of the new directory
+ * @mode: The mode of the new directory
+ *
+ * Returns: errno
+ */
+
+static int gfs2_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+ return gfs2_create_inode(dir, dentry, S_IFDIR | mode, 0, NULL, 0);
+}
+
+/**
+ * gfs2_mknod - Make a special file
+ * @dir: The directory in which the special file will reside
+ * @dentry: The dentry of the special file
+ * @mode: The mode of the special file
+ * @dev: The device specification of the special file
+ *
+ */
+
+static int gfs2_mknod(struct inode *dir, struct dentry *dentry, int mode,
+ dev_t dev)
+{
+ return gfs2_create_inode(dir, dentry, mode, dev, NULL, 0);
+}
+
+/*
+ * gfs2_ok_to_move - check if it's ok to move a directory to another directory
+ * @this: move this
+ * @to: to here
+ *
+ * Follow @to back to the root and make sure we don't encounter @this
+ * Assumes we already hold the rename lock.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_ok_to_move(struct gfs2_inode *this, struct gfs2_inode *to)
+{
+ struct inode *dir = &to->i_inode;
+ struct super_block *sb = dir->i_sb;
+ struct inode *tmp;
+ int error = 0;
+
+ igrab(dir);
+
+ for (;;) {
+ if (dir == &this->i_inode) {
+ error = -EINVAL;
+ break;
+ }
+ if (dir == sb->s_root->d_inode) {
+ error = 0;
+ break;
+ }
+
+ tmp = gfs2_lookupi(dir, &gfs2_qdotdot, 1);
+ if (IS_ERR(tmp)) {
+ error = PTR_ERR(tmp);
+ break;
+ }
+
+ iput(dir);
+ dir = tmp;
+ }
+
+ iput(dir);
+
+ return error;
+}
+
+/**
+ * gfs2_rename - Rename a file
+ * @odir: Parent directory of old file name
+ * @odentry: The old dentry of the file
+ * @ndir: Parent directory of new file name
+ * @ndentry: The new dentry of the file
+ *
+ * Returns: errno
+ */
+
+static int gfs2_rename(struct inode *odir, struct dentry *odentry,
+ struct inode *ndir, struct dentry *ndentry)
+{
+ struct gfs2_inode *odip = GFS2_I(odir);
+ struct gfs2_inode *ndip = GFS2_I(ndir);
+ struct gfs2_inode *ip = GFS2_I(odentry->d_inode);
+ struct gfs2_inode *nip = NULL;
+ struct gfs2_sbd *sdp = GFS2_SB(odir);
+ struct gfs2_holder ghs[5], r_gh = { .gh_gl = NULL, }, ri_gh;
+ struct gfs2_rgrpd *nrgd;
+ unsigned int num_gh;
+ int dir_rename = 0;
+ int alloc_required = 0;
+ unsigned int x;
+ int error;
+
+ if (ndentry->d_inode) {
+ nip = GFS2_I(ndentry->d_inode);
+ if (ip == nip)
+ return 0;
+ }
+
+ error = gfs2_rindex_hold(sdp, &ri_gh);
+ if (error)
+ return error;
+
+ if (odip != ndip) {
+ error = gfs2_glock_nq_init(sdp->sd_rename_gl, LM_ST_EXCLUSIVE,
+ 0, &r_gh);
+ if (error)
+ goto out;
+
+ if (S_ISDIR(ip->i_inode.i_mode)) {
+ dir_rename = 1;
+ /* don't move a dirctory into it's subdir */
+ error = gfs2_ok_to_move(ip, ndip);
+ if (error)
+ goto out_gunlock_r;
+ }
+ }
+
+ num_gh = 1;
+ gfs2_holder_init(odip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
+ if (odip != ndip) {
+ gfs2_holder_init(ndip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
+ num_gh++;
+ }
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
+ num_gh++;
+
+ if (nip) {
+ gfs2_holder_init(nip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
+ num_gh++;
+ /* grab the resource lock for unlink flag twiddling
+ * this is the case of the target file already existing
+ * so we unlink before doing the rename
+ */
+ nrgd = gfs2_blk2rgrpd(sdp, nip->i_no_addr);
+ if (nrgd)
+ gfs2_holder_init(nrgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh++);
+ }
+
+ for (x = 0; x < num_gh; x++) {
+ error = gfs2_glock_nq(ghs + x);
+ if (error)
+ goto out_gunlock;
+ }
+
+ error = -ENOENT;
+ if (ip->i_inode.i_nlink == 0)
+ goto out_gunlock;
+
+ /* Check out the old directory */
+
+ error = gfs2_unlink_ok(odip, &odentry->d_name, ip);
+ if (error)
+ goto out_gunlock;
+
+ /* Check out the new directory */
+
+ if (nip) {
+ error = gfs2_unlink_ok(ndip, &ndentry->d_name, nip);
+ if (error)
+ goto out_gunlock;
+
+ if (nip->i_inode.i_nlink == 0) {
+ error = -EAGAIN;
+ goto out_gunlock;
+ }
+
+ if (S_ISDIR(nip->i_inode.i_mode)) {
+ if (nip->i_entries < 2) {
+ gfs2_consist_inode(nip);
+ error = -EIO;
+ goto out_gunlock;
+ }
+ if (nip->i_entries > 2) {
+ error = -ENOTEMPTY;
+ goto out_gunlock;
+ }
+ }
+ } else {
+ error = gfs2_permission(ndir, MAY_WRITE | MAY_EXEC, 0);
+ if (error)
+ goto out_gunlock;
+
+ error = gfs2_dir_check(ndir, &ndentry->d_name, NULL);
+ switch (error) {
+ case -ENOENT:
+ error = 0;
+ break;
+ case 0:
+ error = -EEXIST;
+ default:
+ goto out_gunlock;
+ };
+
+ if (odip != ndip) {
+ if (!ndip->i_inode.i_nlink) {
+ error = -ENOENT;
+ goto out_gunlock;
+ }
+ if (ndip->i_entries == (u32)-1) {
+ error = -EFBIG;
+ goto out_gunlock;
+ }
+ if (S_ISDIR(ip->i_inode.i_mode) &&
+ ndip->i_inode.i_nlink == (u32)-1) {
+ error = -EMLINK;
+ goto out_gunlock;
+ }
+ }
+ }
+
+ /* Check out the dir to be renamed */
+
+ if (dir_rename) {
+ error = gfs2_permission(odentry->d_inode, MAY_WRITE, 0);
+ if (error)
+ goto out_gunlock;
+ }
+
+ if (nip == NULL)
+ alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
+ error = alloc_required;
+ if (error < 0)
+ goto out_gunlock;
+ error = 0;
+
+ if (alloc_required) {
+ struct gfs2_alloc *al = gfs2_alloc_get(ndip);
+ if (!al) {
+ error = -ENOMEM;
+ goto out_gunlock;
+ }
+
+ error = gfs2_quota_lock_check(ndip);
+ if (error)
+ goto out_alloc;
+
+ al->al_requested = sdp->sd_max_dirres;
+
+ error = gfs2_inplace_reserve_ri(ndip);
+ if (error)
+ goto out_gunlock_q;
+
+ error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
+ gfs2_rg_blocks(al) +
+ 4 * RES_DINODE + 4 * RES_LEAF +
+ RES_STATFS + RES_QUOTA + 4, 0);
+ if (error)
+ goto out_ipreserv;
+ } else {
+ error = gfs2_trans_begin(sdp, 4 * RES_DINODE +
+ 5 * RES_LEAF + 4, 0);
+ if (error)
+ goto out_gunlock;
+ }
+
+ /* Remove the target file, if it exists */
+
+ if (nip) {
+ struct buffer_head *bh;
+ error = gfs2_meta_inode_buffer(nip, &bh);
+ if (error)
+ goto out_end_trans;
+ error = gfs2_unlink_inode(ndip, ndentry, bh);
+ brelse(bh);
+ }
+
+ if (dir_rename) {
+ error = gfs2_dir_mvino(ip, &gfs2_qdotdot, ndip, DT_DIR);
+ if (error)
+ goto out_end_trans;
+ } else {
+ struct buffer_head *dibh;
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error)
+ goto out_end_trans;
+ ip->i_inode.i_ctime = CURRENT_TIME;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+ error = gfs2_dir_del(odip, odentry);
+ if (error)
+ goto out_end_trans;
+
+ error = gfs2_dir_add(ndir, &ndentry->d_name, ip);
+ if (error)
+ goto out_end_trans;
+
+out_end_trans:
+ gfs2_trans_end(sdp);
+out_ipreserv:
+ if (alloc_required)
+ gfs2_inplace_release(ndip);
+out_gunlock_q:
+ if (alloc_required)
+ gfs2_quota_unlock(ndip);
+out_alloc:
+ if (alloc_required)
+ gfs2_alloc_put(ndip);
+out_gunlock:
+ while (x--) {
+ gfs2_glock_dq(ghs + x);
+ gfs2_holder_uninit(ghs + x);
+ }
+out_gunlock_r:
+ if (r_gh.gh_gl)
+ gfs2_glock_dq_uninit(&r_gh);
+out:
+ gfs2_glock_dq_uninit(&ri_gh);
+ return error;
+}
+
+/**
+ * gfs2_follow_link - Follow a symbolic link
+ * @dentry: The dentry of the link
+ * @nd: Data that we pass to vfs_follow_link()
+ *
+ * This can handle symlinks of any size.
+ *
+ * Returns: 0 on success or error code
+ */
+
+static void *gfs2_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+ struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
+ struct gfs2_holder i_gh;
+ struct buffer_head *dibh;
+ unsigned int size;
+ char *buf;
+ int error;
+
+ gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
+ error = gfs2_glock_nq(&i_gh);
+ if (error) {
+ gfs2_holder_uninit(&i_gh);
+ nd_set_link(nd, ERR_PTR(error));
+ return NULL;
+ }
+
+ size = (unsigned int)i_size_read(&ip->i_inode);
+ if (size == 0) {
+ gfs2_consist_inode(ip);
+ buf = ERR_PTR(-EIO);
+ goto out;
+ }
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error) {
+ buf = ERR_PTR(error);
+ goto out;
+ }
+
+ buf = kzalloc(size + 1, GFP_NOFS);
+ if (!buf)
+ buf = ERR_PTR(-ENOMEM);
+ else
+ memcpy(buf, dibh->b_data + sizeof(struct gfs2_dinode), size);
+ brelse(dibh);
+out:
+ gfs2_glock_dq_uninit(&i_gh);
+ nd_set_link(nd, buf);
+ return NULL;
+}
+
+static void gfs2_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
+{
+ char *s = nd_get_link(nd);
+ if (!IS_ERR(s))
+ kfree(s);
+}
+
+/**
+ * gfs2_permission -
+ * @inode: The inode
+ * @mask: The mask to be tested
+ * @flags: Indicates whether this is an RCU path walk or not
+ *
+ * This may be called from the VFS directly, or from within GFS2 with the
+ * inode locked, so we look to see if the glock is already locked and only
+ * lock the glock if its not already been done.
+ *
+ * Returns: errno
+ */
+
+int gfs2_permission(struct inode *inode, int mask, unsigned int flags)
+{
+ struct gfs2_inode *ip;
+ struct gfs2_holder i_gh;
+ int error;
+ int unlock = 0;
+
+
+ ip = GFS2_I(inode);
+ if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
+ if (flags & IPERM_FLAG_RCU)
+ return -ECHILD;
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+ if (error)
+ return error;
+ unlock = 1;
+ }
+
+ if ((mask & MAY_WRITE) && IS_IMMUTABLE(inode))
+ error = -EACCES;
+ else
+ error = generic_permission(inode, mask, flags, gfs2_check_acl);
+ if (unlock)
+ gfs2_glock_dq_uninit(&i_gh);
+
+ return error;
}
static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
@@ -928,8 +1594,6 @@
* @ip:
* @attr:
*
- * Called with a reference on the vnode.
- *
* Returns: errno
*/
@@ -949,60 +1613,280 @@
return error;
}
-void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf)
+static int setattr_chown(struct inode *inode, struct iattr *attr)
{
- struct gfs2_dinode *str = buf;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+ u32 ouid, ogid, nuid, ngid;
+ int error;
- str->di_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
- str->di_header.mh_type = cpu_to_be32(GFS2_METATYPE_DI);
- str->di_header.mh_format = cpu_to_be32(GFS2_FORMAT_DI);
- str->di_num.no_addr = cpu_to_be64(ip->i_no_addr);
- str->di_num.no_formal_ino = cpu_to_be64(ip->i_no_formal_ino);
- str->di_mode = cpu_to_be32(ip->i_inode.i_mode);
- str->di_uid = cpu_to_be32(ip->i_inode.i_uid);
- str->di_gid = cpu_to_be32(ip->i_inode.i_gid);
- str->di_nlink = cpu_to_be32(ip->i_inode.i_nlink);
- str->di_size = cpu_to_be64(i_size_read(&ip->i_inode));
- str->di_blocks = cpu_to_be64(gfs2_get_inode_blocks(&ip->i_inode));
- str->di_atime = cpu_to_be64(ip->i_inode.i_atime.tv_sec);
- str->di_mtime = cpu_to_be64(ip->i_inode.i_mtime.tv_sec);
- str->di_ctime = cpu_to_be64(ip->i_inode.i_ctime.tv_sec);
+ ouid = inode->i_uid;
+ ogid = inode->i_gid;
+ nuid = attr->ia_uid;
+ ngid = attr->ia_gid;
- str->di_goal_meta = cpu_to_be64(ip->i_goal);
- str->di_goal_data = cpu_to_be64(ip->i_goal);
- str->di_generation = cpu_to_be64(ip->i_generation);
+ if (!(attr->ia_valid & ATTR_UID) || ouid == nuid)
+ ouid = nuid = NO_QUOTA_CHANGE;
+ if (!(attr->ia_valid & ATTR_GID) || ogid == ngid)
+ ogid = ngid = NO_QUOTA_CHANGE;
- str->di_flags = cpu_to_be32(ip->i_diskflags);
- str->di_height = cpu_to_be16(ip->i_height);
- str->di_payload_format = cpu_to_be32(S_ISDIR(ip->i_inode.i_mode) &&
- !(ip->i_diskflags & GFS2_DIF_EXHASH) ?
- GFS2_FORMAT_DE : 0);
- str->di_depth = cpu_to_be16(ip->i_depth);
- str->di_entries = cpu_to_be32(ip->i_entries);
+ if (!gfs2_alloc_get(ip))
+ return -ENOMEM;
- str->di_eattr = cpu_to_be64(ip->i_eattr);
- str->di_atime_nsec = cpu_to_be32(ip->i_inode.i_atime.tv_nsec);
- str->di_mtime_nsec = cpu_to_be32(ip->i_inode.i_mtime.tv_nsec);
- str->di_ctime_nsec = cpu_to_be32(ip->i_inode.i_ctime.tv_nsec);
+ error = gfs2_quota_lock(ip, nuid, ngid);
+ if (error)
+ goto out_alloc;
+
+ if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
+ error = gfs2_quota_check(ip, nuid, ngid);
+ if (error)
+ goto out_gunlock_q;
+ }
+
+ error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_QUOTA, 0);
+ if (error)
+ goto out_gunlock_q;
+
+ error = gfs2_setattr_simple(ip, attr);
+ if (error)
+ goto out_end_trans;
+
+ if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
+ u64 blocks = gfs2_get_inode_blocks(&ip->i_inode);
+ gfs2_quota_change(ip, -blocks, ouid, ogid);
+ gfs2_quota_change(ip, blocks, nuid, ngid);
+ }
+
+out_end_trans:
+ gfs2_trans_end(sdp);
+out_gunlock_q:
+ gfs2_quota_unlock(ip);
+out_alloc:
+ gfs2_alloc_put(ip);
+ return error;
}
-void gfs2_dinode_print(const struct gfs2_inode *ip)
+/**
+ * gfs2_setattr - Change attributes on an inode
+ * @dentry: The dentry which is changing
+ * @attr: The structure describing the change
+ *
+ * The VFS layer wants to change one or more of an inodes attributes. Write
+ * that change out to disk.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_setattr(struct dentry *dentry, struct iattr *attr)
{
- printk(KERN_INFO " no_formal_ino = %llu\n",
- (unsigned long long)ip->i_no_formal_ino);
- printk(KERN_INFO " no_addr = %llu\n",
- (unsigned long long)ip->i_no_addr);
- printk(KERN_INFO " i_size = %llu\n",
- (unsigned long long)i_size_read(&ip->i_inode));
- printk(KERN_INFO " blocks = %llu\n",
- (unsigned long long)gfs2_get_inode_blocks(&ip->i_inode));
- printk(KERN_INFO " i_goal = %llu\n",
- (unsigned long long)ip->i_goal);
- printk(KERN_INFO " i_diskflags = 0x%.8X\n", ip->i_diskflags);
- printk(KERN_INFO " i_height = %u\n", ip->i_height);
- printk(KERN_INFO " i_depth = %u\n", ip->i_depth);
- printk(KERN_INFO " i_entries = %u\n", ip->i_entries);
- printk(KERN_INFO " i_eattr = %llu\n",
- (unsigned long long)ip->i_eattr);
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder i_gh;
+ int error;
+
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
+ if (error)
+ return error;
+
+ error = -EPERM;
+ if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+ goto out;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ goto out;
+
+ if (attr->ia_valid & ATTR_SIZE)
+ error = gfs2_setattr_size(inode, attr->ia_size);
+ else if (attr->ia_valid & (ATTR_UID | ATTR_GID))
+ error = setattr_chown(inode, attr);
+ else if ((attr->ia_valid & ATTR_MODE) && IS_POSIXACL(inode))
+ error = gfs2_acl_chmod(ip, attr);
+ else
+ error = gfs2_setattr_simple(ip, attr);
+
+out:
+ gfs2_glock_dq_uninit(&i_gh);
+ if (!error)
+ mark_inode_dirty(inode);
+ return error;
}
+/**
+ * gfs2_getattr - Read out an inode's attributes
+ * @mnt: The vfsmount the inode is being accessed from
+ * @dentry: The dentry to stat
+ * @stat: The inode's stats
+ *
+ * This may be called from the VFS directly, or from within GFS2 with the
+ * inode locked, so we look to see if the glock is already locked and only
+ * lock the glock if its not already been done. Note that its the NFS
+ * readdirplus operation which causes this to be called (from filldir)
+ * with the glock already held.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int error;
+ int unlock = 0;
+
+ if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+ if (error)
+ return error;
+ unlock = 1;
+ }
+
+ generic_fillattr(inode, stat);
+ if (unlock)
+ gfs2_glock_dq_uninit(&gh);
+
+ return 0;
+}
+
+static int gfs2_setxattr(struct dentry *dentry, const char *name,
+ const void *data, size_t size, int flags)
+{
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret == 0) {
+ ret = generic_setxattr(dentry, name, data, size, flags);
+ gfs2_glock_dq(&gh);
+ }
+ gfs2_holder_uninit(&gh);
+ return ret;
+}
+
+static ssize_t gfs2_getxattr(struct dentry *dentry, const char *name,
+ void *data, size_t size)
+{
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret == 0) {
+ ret = generic_getxattr(dentry, name, data, size);
+ gfs2_glock_dq(&gh);
+ }
+ gfs2_holder_uninit(&gh);
+ return ret;
+}
+
+static int gfs2_removexattr(struct dentry *dentry, const char *name)
+{
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret == 0) {
+ ret = generic_removexattr(dentry, name);
+ gfs2_glock_dq(&gh);
+ }
+ gfs2_holder_uninit(&gh);
+ return ret;
+}
+
+static int gfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
+ u64 start, u64 len)
+{
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
+ if (ret)
+ return ret;
+
+ mutex_lock(&inode->i_mutex);
+
+ ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
+ if (ret)
+ goto out;
+
+ if (gfs2_is_stuffed(ip)) {
+ u64 phys = ip->i_no_addr << inode->i_blkbits;
+ u64 size = i_size_read(inode);
+ u32 flags = FIEMAP_EXTENT_LAST|FIEMAP_EXTENT_NOT_ALIGNED|
+ FIEMAP_EXTENT_DATA_INLINE;
+ phys += sizeof(struct gfs2_dinode);
+ phys += start;
+ if (start + len > size)
+ len = size - start;
+ if (start < size)
+ ret = fiemap_fill_next_extent(fieinfo, start, phys,
+ len, flags);
+ if (ret == 1)
+ ret = 0;
+ } else {
+ ret = __generic_block_fiemap(inode, fieinfo, start, len,
+ gfs2_block_map);
+ }
+
+ gfs2_glock_dq_uninit(&gh);
+out:
+ mutex_unlock(&inode->i_mutex);
+ return ret;
+}
+
+const struct inode_operations gfs2_file_iops = {
+ .permission = gfs2_permission,
+ .setattr = gfs2_setattr,
+ .getattr = gfs2_getattr,
+ .setxattr = gfs2_setxattr,
+ .getxattr = gfs2_getxattr,
+ .listxattr = gfs2_listxattr,
+ .removexattr = gfs2_removexattr,
+ .fiemap = gfs2_fiemap,
+};
+
+const struct inode_operations gfs2_dir_iops = {
+ .create = gfs2_create,
+ .lookup = gfs2_lookup,
+ .link = gfs2_link,
+ .unlink = gfs2_unlink,
+ .symlink = gfs2_symlink,
+ .mkdir = gfs2_mkdir,
+ .rmdir = gfs2_unlink,
+ .mknod = gfs2_mknod,
+ .rename = gfs2_rename,
+ .permission = gfs2_permission,
+ .setattr = gfs2_setattr,
+ .getattr = gfs2_getattr,
+ .setxattr = gfs2_setxattr,
+ .getxattr = gfs2_getxattr,
+ .listxattr = gfs2_listxattr,
+ .removexattr = gfs2_removexattr,
+ .fiemap = gfs2_fiemap,
+};
+
+const struct inode_operations gfs2_symlink_iops = {
+ .readlink = generic_readlink,
+ .follow_link = gfs2_follow_link,
+ .put_link = gfs2_put_link,
+ .permission = gfs2_permission,
+ .setattr = gfs2_setattr,
+ .getattr = gfs2_getattr,
+ .setxattr = gfs2_setxattr,
+ .getxattr = gfs2_getxattr,
+ .listxattr = gfs2_listxattr,
+ .removexattr = gfs2_removexattr,
+ .fiemap = gfs2_fiemap,
+};
+
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 099ca30..3160607 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -102,22 +102,16 @@
extern struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
u64 *no_formal_ino,
unsigned int blktype);
-extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
+extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr, int nonblock);
extern int gfs2_inode_refresh(struct gfs2_inode *ip);
-extern int gfs2_dinode_dealloc(struct gfs2_inode *inode);
-extern int gfs2_change_nlink(struct gfs2_inode *ip, int diff);
extern struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
int is_root);
-extern struct inode *gfs2_createi(struct gfs2_holder *ghs,
- const struct qstr *name,
- unsigned int mode, dev_t dev);
extern int gfs2_permission(struct inode *inode, int mask, unsigned int flags);
extern int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr);
extern struct inode *gfs2_lookup_simple(struct inode *dip, const char *name);
extern void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf);
-extern void gfs2_dinode_print(const struct gfs2_inode *ip);
extern const struct inode_operations gfs2_file_iops;
extern const struct inode_operations gfs2_dir_iops;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 5b102c1..cec26c0 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -18,6 +18,7 @@
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/bio.h>
+#include <linux/writeback.h>
#include "gfs2.h"
#include "incore.h"
@@ -83,55 +84,97 @@
/**
* gfs2_ail1_start_one - Start I/O on a part of the AIL
* @sdp: the filesystem
- * @tr: the part of the AIL
+ * @wbc: The writeback control structure
+ * @ai: The ail structure
*
*/
-static void gfs2_ail1_start_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
+static int gfs2_ail1_start_one(struct gfs2_sbd *sdp,
+ struct writeback_control *wbc,
+ struct gfs2_ail *ai)
__releases(&sdp->sd_ail_lock)
__acquires(&sdp->sd_ail_lock)
{
+ struct gfs2_glock *gl = NULL;
+ struct address_space *mapping;
struct gfs2_bufdata *bd, *s;
struct buffer_head *bh;
- int retry;
- do {
- retry = 0;
+ list_for_each_entry_safe_reverse(bd, s, &ai->ai_ail1_list, bd_ail_st_list) {
+ bh = bd->bd_bh;
- list_for_each_entry_safe_reverse(bd, s, &ai->ai_ail1_list,
- bd_ail_st_list) {
- bh = bd->bd_bh;
+ gfs2_assert(sdp, bd->bd_ail == ai);
- gfs2_assert(sdp, bd->bd_ail == ai);
-
- if (!buffer_busy(bh)) {
- if (!buffer_uptodate(bh))
- gfs2_io_error_bh(sdp, bh);
- list_move(&bd->bd_ail_st_list, &ai->ai_ail2_list);
- continue;
- }
-
- if (!buffer_dirty(bh))
- continue;
-
- list_move(&bd->bd_ail_st_list, &ai->ai_ail1_list);
-
- get_bh(bh);
- spin_unlock(&sdp->sd_ail_lock);
- lock_buffer(bh);
- if (test_clear_buffer_dirty(bh)) {
- bh->b_end_io = end_buffer_write_sync;
- submit_bh(WRITE_SYNC, bh);
- } else {
- unlock_buffer(bh);
- brelse(bh);
- }
- spin_lock(&sdp->sd_ail_lock);
-
- retry = 1;
- break;
+ if (!buffer_busy(bh)) {
+ if (!buffer_uptodate(bh))
+ gfs2_io_error_bh(sdp, bh);
+ list_move(&bd->bd_ail_st_list, &ai->ai_ail2_list);
+ continue;
}
- } while (retry);
+
+ if (!buffer_dirty(bh))
+ continue;
+ if (gl == bd->bd_gl)
+ continue;
+ gl = bd->bd_gl;
+ list_move(&bd->bd_ail_st_list, &ai->ai_ail1_list);
+ mapping = bh->b_page->mapping;
+ if (!mapping)
+ continue;
+ spin_unlock(&sdp->sd_ail_lock);
+ generic_writepages(mapping, wbc);
+ spin_lock(&sdp->sd_ail_lock);
+ if (wbc->nr_to_write <= 0)
+ break;
+ return 1;
+ }
+
+ return 0;
+}
+
+
+/**
+ * gfs2_ail1_flush - start writeback of some ail1 entries
+ * @sdp: The super block
+ * @wbc: The writeback control structure
+ *
+ * Writes back some ail1 entries, according to the limits in the
+ * writeback control structure
+ */
+
+void gfs2_ail1_flush(struct gfs2_sbd *sdp, struct writeback_control *wbc)
+{
+ struct list_head *head = &sdp->sd_ail1_list;
+ struct gfs2_ail *ai;
+
+ trace_gfs2_ail_flush(sdp, wbc, 1);
+ spin_lock(&sdp->sd_ail_lock);
+restart:
+ list_for_each_entry_reverse(ai, head, ai_list) {
+ if (wbc->nr_to_write <= 0)
+ break;
+ if (gfs2_ail1_start_one(sdp, wbc, ai))
+ goto restart;
+ }
+ spin_unlock(&sdp->sd_ail_lock);
+ trace_gfs2_ail_flush(sdp, wbc, 0);
+}
+
+/**
+ * gfs2_ail1_start - start writeback of all ail1 entries
+ * @sdp: The superblock
+ */
+
+static void gfs2_ail1_start(struct gfs2_sbd *sdp)
+{
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_NONE,
+ .nr_to_write = LONG_MAX,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ };
+
+ return gfs2_ail1_flush(sdp, &wbc);
}
/**
@@ -141,7 +184,7 @@
*
*/
-static int gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai, int flags)
+static void gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
{
struct gfs2_bufdata *bd, *s;
struct buffer_head *bh;
@@ -149,71 +192,37 @@
list_for_each_entry_safe_reverse(bd, s, &ai->ai_ail1_list,
bd_ail_st_list) {
bh = bd->bd_bh;
-
gfs2_assert(sdp, bd->bd_ail == ai);
-
- if (buffer_busy(bh)) {
- if (flags & DIO_ALL)
- continue;
- else
- break;
- }
-
+ if (buffer_busy(bh))
+ continue;
if (!buffer_uptodate(bh))
gfs2_io_error_bh(sdp, bh);
-
list_move(&bd->bd_ail_st_list, &ai->ai_ail2_list);
}
- return list_empty(&ai->ai_ail1_list);
}
-static void gfs2_ail1_start(struct gfs2_sbd *sdp)
-{
- struct list_head *head;
- u64 sync_gen;
- struct gfs2_ail *ai;
- int done = 0;
+/**
+ * gfs2_ail1_empty - Try to empty the ail1 lists
+ * @sdp: The superblock
+ *
+ * Tries to empty the ail1 lists, starting with the oldest first
+ */
- spin_lock(&sdp->sd_ail_lock);
- head = &sdp->sd_ail1_list;
- if (list_empty(head)) {
- spin_unlock(&sdp->sd_ail_lock);
- return;
- }
- sync_gen = sdp->sd_ail_sync_gen++;
-
- while(!done) {
- done = 1;
- list_for_each_entry_reverse(ai, head, ai_list) {
- if (ai->ai_sync_gen >= sync_gen)
- continue;
- ai->ai_sync_gen = sync_gen;
- gfs2_ail1_start_one(sdp, ai); /* This may drop ail lock */
- done = 0;
- break;
- }
- }
-
- spin_unlock(&sdp->sd_ail_lock);
-}
-
-static int gfs2_ail1_empty(struct gfs2_sbd *sdp, int flags)
+static int gfs2_ail1_empty(struct gfs2_sbd *sdp)
{
struct gfs2_ail *ai, *s;
int ret;
spin_lock(&sdp->sd_ail_lock);
-
list_for_each_entry_safe_reverse(ai, s, &sdp->sd_ail1_list, ai_list) {
- if (gfs2_ail1_empty_one(sdp, ai, flags))
+ gfs2_ail1_empty_one(sdp, ai);
+ if (list_empty(&ai->ai_ail1_list))
list_move(&ai->ai_list, &sdp->sd_ail2_list);
- else if (!(flags & DIO_ALL))
+ else
break;
}
-
ret = list_empty(&sdp->sd_ail1_list);
-
spin_unlock(&sdp->sd_ail_lock);
return ret;
@@ -574,7 +583,7 @@
set_buffer_uptodate(bh);
clear_buffer_dirty(bh);
- gfs2_ail1_empty(sdp, 0);
+ gfs2_ail1_empty(sdp);
tail = current_tail(sdp);
lh = (struct gfs2_log_header *)bh->b_data;
@@ -869,7 +878,7 @@
gfs2_log_flush(sdp, NULL);
for (;;) {
gfs2_ail1_start(sdp);
- if (gfs2_ail1_empty(sdp, DIO_ALL))
+ if (gfs2_ail1_empty(sdp))
break;
msleep(10);
}
@@ -905,17 +914,15 @@
preflush = atomic_read(&sdp->sd_log_pinned);
if (gfs2_jrnl_flush_reqd(sdp) || t == 0) {
- gfs2_ail1_empty(sdp, DIO_ALL);
+ gfs2_ail1_empty(sdp);
gfs2_log_flush(sdp, NULL);
- gfs2_ail1_empty(sdp, DIO_ALL);
}
if (gfs2_ail_flush_reqd(sdp)) {
gfs2_ail1_start(sdp);
io_schedule();
- gfs2_ail1_empty(sdp, 0);
+ gfs2_ail1_empty(sdp);
gfs2_log_flush(sdp, NULL);
- gfs2_ail1_empty(sdp, DIO_ALL);
}
wake_up(&sdp->sd_log_waitq);
diff --git a/fs/gfs2/log.h b/fs/gfs2/log.h
index 0d007f9..ab06216 100644
--- a/fs/gfs2/log.h
+++ b/fs/gfs2/log.h
@@ -12,6 +12,7 @@
#include <linux/list.h>
#include <linux/spinlock.h>
+#include <linux/writeback.h>
#include "incore.h"
/**
@@ -59,6 +60,7 @@
extern void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl);
extern void gfs2_log_commit(struct gfs2_sbd *sdp, struct gfs2_trans *trans);
extern void gfs2_remove_from_ail(struct gfs2_bufdata *bd);
+extern void gfs2_ail1_flush(struct gfs2_sbd *sdp, struct writeback_control *wbc);
extern void gfs2_log_shutdown(struct gfs2_sbd *sdp);
extern void gfs2_meta_syncfs(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 51d27f0..05bbb12 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -40,7 +40,7 @@
{
struct gfs2_bufdata *bd;
- gfs2_assert_withdraw(sdp, test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags));
+ BUG_ON(!current->journal_info);
clear_buffer_dirty(bh);
if (test_set_buffer_pinned(bh))
@@ -65,6 +65,7 @@
* @sdp: the filesystem the buffer belongs to
* @bh: The buffer to unpin
* @ai:
+ * @flags: The inode dirty flags
*
*/
@@ -73,10 +74,8 @@
{
struct gfs2_bufdata *bd = bh->b_private;
- gfs2_assert_withdraw(sdp, buffer_uptodate(bh));
-
- if (!buffer_pinned(bh))
- gfs2_assert_withdraw(sdp, 0);
+ BUG_ON(!buffer_uptodate(bh));
+ BUG_ON(!buffer_pinned(bh));
lock_buffer(bh);
mark_buffer_dirty(bh);
@@ -95,8 +94,7 @@
list_add(&bd->bd_ail_st_list, &ai->ai_ail1_list);
spin_unlock(&sdp->sd_ail_lock);
- if (test_and_clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags))
- gfs2_glock_schedule_for_reclaim(bd->bd_gl);
+ clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
trace_gfs2_pin(bd, 0);
unlock_buffer(bh);
atomic_dec(&sdp->sd_log_pinned);
@@ -322,12 +320,16 @@
static void revoke_lo_add(struct gfs2_sbd *sdp, struct gfs2_log_element *le)
{
+ struct gfs2_bufdata *bd = container_of(le, struct gfs2_bufdata, bd_le);
+ struct gfs2_glock *gl = bd->bd_gl;
struct gfs2_trans *tr;
tr = current->journal_info;
tr->tr_touched = 1;
tr->tr_num_revoke++;
sdp->sd_log_num_revoke++;
+ atomic_inc(&gl->gl_revokes);
+ set_bit(GLF_LFLUSH, &gl->gl_flags);
list_add(&le->le_list, &sdp->sd_log_le_revoke);
}
@@ -350,9 +352,7 @@
ld->ld_data1 = cpu_to_be32(sdp->sd_log_num_revoke);
offset = sizeof(struct gfs2_log_descriptor);
- while (!list_empty(head)) {
- bd = list_entry(head->next, struct gfs2_bufdata, bd_le.le_list);
- list_del_init(&bd->bd_le.le_list);
+ list_for_each_entry(bd, head, bd_le.le_list) {
sdp->sd_log_num_revoke--;
if (offset + sizeof(u64) > sdp->sd_sb.sb_bsize) {
@@ -367,8 +367,6 @@
}
*(__be64 *)(bh->b_data + offset) = cpu_to_be64(bd->bd_blkno);
- kmem_cache_free(gfs2_bufdata_cachep, bd);
-
offset += sizeof(u64);
}
gfs2_assert_withdraw(sdp, !sdp->sd_log_num_revoke);
@@ -376,6 +374,22 @@
submit_bh(WRITE_SYNC, bh);
}
+static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
+{
+ struct list_head *head = &sdp->sd_log_le_revoke;
+ struct gfs2_bufdata *bd;
+ struct gfs2_glock *gl;
+
+ while (!list_empty(head)) {
+ bd = list_entry(head->next, struct gfs2_bufdata, bd_le.le_list);
+ list_del_init(&bd->bd_le.le_list);
+ gl = bd->bd_gl;
+ atomic_dec(&gl->gl_revokes);
+ clear_bit(GLF_LFLUSH, &gl->gl_flags);
+ kmem_cache_free(gfs2_bufdata_cachep, bd);
+ }
+}
+
static void revoke_lo_before_scan(struct gfs2_jdesc *jd,
struct gfs2_log_header_host *head, int pass)
{
@@ -749,6 +763,7 @@
const struct gfs2_log_operations gfs2_revoke_lops = {
.lo_add = revoke_lo_add,
.lo_before_commit = revoke_lo_before_commit,
+ .lo_after_commit = revoke_lo_after_commit,
.lo_before_scan = revoke_lo_before_scan,
.lo_scan_elements = revoke_lo_scan_elements,
.lo_after_scan = revoke_lo_after_scan,
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index 888a5f5..cfa327d 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -53,6 +53,7 @@
INIT_LIST_HEAD(&gl->gl_lru);
INIT_LIST_HEAD(&gl->gl_ail_list);
atomic_set(&gl->gl_ail_count, 0);
+ atomic_set(&gl->gl_revokes, 0);
}
static void gfs2_init_gl_aspace_once(void *foo)
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 675349b..747238c 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -31,6 +31,7 @@
#include "rgrp.h"
#include "trans.h"
#include "util.h"
+#include "trace_gfs2.h"
static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wbc)
{
@@ -310,6 +311,7 @@
struct gfs2_bufdata *bd = bh->b_private;
if (test_clear_buffer_pinned(bh)) {
+ trace_gfs2_pin(bd, 0);
atomic_dec(&sdp->sd_log_pinned);
list_del_init(&bd->bd_le.le_list);
if (meta) {
diff --git a/fs/gfs2/meta_io.h b/fs/gfs2/meta_io.h
index 6a1d9ba..22c5265 100644
--- a/fs/gfs2/meta_io.h
+++ b/fs/gfs2/meta_io.h
@@ -77,8 +77,6 @@
#define buffer_busy(bh) \
((bh)->b_state & ((1ul << BH_Dirty) | (1ul << BH_Lock) | (1ul << BH_Pinned)))
-#define buffer_in_io(bh) \
-((bh)->b_state & ((1ul << BH_Dirty) | (1ul << BH_Lock)))
#endif /* __DIO_DOT_H__ */
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index d3c69eb..8ac9ae1 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -126,8 +126,10 @@
* changed.
*/
-static int gfs2_check_sb(struct gfs2_sbd *sdp, struct gfs2_sb_host *sb, int silent)
+static int gfs2_check_sb(struct gfs2_sbd *sdp, int silent)
{
+ struct gfs2_sb_host *sb = &sdp->sd_sb;
+
if (sb->sb_magic != GFS2_MAGIC ||
sb->sb_type != GFS2_METATYPE_SB) {
if (!silent)
@@ -157,8 +159,10 @@
unlock_page(page);
}
-static void gfs2_sb_in(struct gfs2_sb_host *sb, const void *buf)
+static void gfs2_sb_in(struct gfs2_sbd *sdp, const void *buf)
{
+ struct gfs2_sb_host *sb = &sdp->sd_sb;
+ struct super_block *s = sdp->sd_vfs;
const struct gfs2_sb *str = buf;
sb->sb_magic = be32_to_cpu(str->sb_header.mh_magic);
@@ -175,7 +179,7 @@
memcpy(sb->sb_lockproto, str->sb_lockproto, GFS2_LOCKNAME_LEN);
memcpy(sb->sb_locktable, str->sb_locktable, GFS2_LOCKNAME_LEN);
- memcpy(sb->sb_uuid, str->sb_uuid, 16);
+ memcpy(s->s_uuid, str->sb_uuid, 16);
}
/**
@@ -197,7 +201,7 @@
* Returns: 0 on success or error
*/
-static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector)
+static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector, int silent)
{
struct super_block *sb = sdp->sd_vfs;
struct gfs2_sb *p;
@@ -227,10 +231,10 @@
return -EIO;
}
p = kmap(page);
- gfs2_sb_in(&sdp->sd_sb, p);
+ gfs2_sb_in(sdp, p);
kunmap(page);
__free_page(page);
- return 0;
+ return gfs2_check_sb(sdp, silent);
}
/**
@@ -247,17 +251,13 @@
unsigned int x;
int error;
- error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift);
+ error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift, silent);
if (error) {
if (!silent)
fs_err(sdp, "can't read superblock\n");
return error;
}
- error = gfs2_check_sb(sdp, &sdp->sd_sb, silent);
- if (error)
- return error;
-
sdp->sd_fsb2bb_shift = sdp->sd_sb.sb_bsize_shift -
GFS2_BASIC_BLOCK_SHIFT;
sdp->sd_fsb2bb = 1 << sdp->sd_fsb2bb_shift;
@@ -340,14 +340,10 @@
/* Try to autodetect */
if (!proto[0] || !table[0]) {
- error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift);
+ error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift, silent);
if (error)
return error;
- error = gfs2_check_sb(sdp, &sdp->sd_sb, silent);
- if (error)
- goto out;
-
if (!proto[0])
proto = sdp->sd_sb.sb_lockproto;
if (!table[0])
@@ -364,7 +360,6 @@
while ((table = strchr(table, '/')))
*table = '_';
-out:
return error;
}
@@ -1119,8 +1114,7 @@
if (sdp->sd_args.ar_statfs_quantum) {
sdp->sd_tune.gt_statfs_slow = 0;
sdp->sd_tune.gt_statfs_quantum = sdp->sd_args.ar_statfs_quantum;
- }
- else {
+ } else {
sdp->sd_tune.gt_statfs_slow = 1;
sdp->sd_tune.gt_statfs_quantum = 30;
}
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
deleted file mode 100644
index 09e436a..0000000
--- a/fs/gfs2/ops_inode.c
+++ /dev/null
@@ -1,1344 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/buffer_head.h>
-#include <linux/namei.h>
-#include <linux/mm.h>
-#include <linux/xattr.h>
-#include <linux/posix_acl.h>
-#include <linux/gfs2_ondisk.h>
-#include <linux/crc32.h>
-#include <linux/fiemap.h>
-#include <asm/uaccess.h>
-
-#include "gfs2.h"
-#include "incore.h"
-#include "acl.h"
-#include "bmap.h"
-#include "dir.h"
-#include "xattr.h"
-#include "glock.h"
-#include "inode.h"
-#include "meta_io.h"
-#include "quota.h"
-#include "rgrp.h"
-#include "trans.h"
-#include "util.h"
-#include "super.h"
-
-/**
- * gfs2_create - Create a file
- * @dir: The directory in which to create the file
- * @dentry: The dentry of the new file
- * @mode: The mode of the new file
- *
- * Returns: errno
- */
-
-static int gfs2_create(struct inode *dir, struct dentry *dentry,
- int mode, struct nameidata *nd)
-{
- struct gfs2_inode *dip = GFS2_I(dir);
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct gfs2_holder ghs[2];
- struct inode *inode;
-
- gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
- for (;;) {
- inode = gfs2_createi(ghs, &dentry->d_name, S_IFREG | mode, 0);
- if (!IS_ERR(inode)) {
- gfs2_trans_end(sdp);
- if (dip->i_alloc->al_rgd)
- gfs2_inplace_release(dip);
- gfs2_quota_unlock(dip);
- gfs2_alloc_put(dip);
- gfs2_glock_dq_uninit_m(2, ghs);
- mark_inode_dirty(inode);
- break;
- } else if (PTR_ERR(inode) != -EEXIST ||
- (nd && nd->flags & LOOKUP_EXCL)) {
- gfs2_holder_uninit(ghs);
- return PTR_ERR(inode);
- }
-
- inode = gfs2_lookupi(dir, &dentry->d_name, 0);
- if (inode) {
- if (!IS_ERR(inode)) {
- gfs2_holder_uninit(ghs);
- break;
- } else {
- gfs2_holder_uninit(ghs);
- return PTR_ERR(inode);
- }
- }
- }
-
- d_instantiate(dentry, inode);
-
- return 0;
-}
-
-/**
- * gfs2_lookup - Look up a filename in a directory and return its inode
- * @dir: The directory inode
- * @dentry: The dentry of the new inode
- * @nd: passed from Linux VFS, ignored by us
- *
- * Called by the VFS layer. Lock dir and call gfs2_lookupi()
- *
- * Returns: errno
- */
-
-static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
-{
- struct inode *inode = NULL;
-
- inode = gfs2_lookupi(dir, &dentry->d_name, 0);
- if (inode && IS_ERR(inode))
- return ERR_CAST(inode);
-
- if (inode) {
- struct gfs2_glock *gl = GFS2_I(inode)->i_gl;
- struct gfs2_holder gh;
- int error;
- error = gfs2_glock_nq_init(gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
- if (error) {
- iput(inode);
- return ERR_PTR(error);
- }
- gfs2_glock_dq_uninit(&gh);
- return d_splice_alias(inode, dentry);
- }
- d_add(dentry, inode);
-
- return NULL;
-}
-
-/**
- * gfs2_link - Link to a file
- * @old_dentry: The inode to link
- * @dir: Add link to this directory
- * @dentry: The name of the link
- *
- * Link the inode in "old_dentry" into the directory "dir" with the
- * name in "dentry".
- *
- * Returns: errno
- */
-
-static int gfs2_link(struct dentry *old_dentry, struct inode *dir,
- struct dentry *dentry)
-{
- struct gfs2_inode *dip = GFS2_I(dir);
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct inode *inode = old_dentry->d_inode;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder ghs[2];
- int alloc_required;
- int error;
-
- if (S_ISDIR(inode->i_mode))
- return -EPERM;
-
- gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
-
- error = gfs2_glock_nq(ghs); /* parent */
- if (error)
- goto out_parent;
-
- error = gfs2_glock_nq(ghs + 1); /* child */
- if (error)
- goto out_child;
-
- error = gfs2_permission(dir, MAY_WRITE | MAY_EXEC, 0);
- if (error)
- goto out_gunlock;
-
- error = gfs2_dir_check(dir, &dentry->d_name, NULL);
- switch (error) {
- case -ENOENT:
- break;
- case 0:
- error = -EEXIST;
- default:
- goto out_gunlock;
- }
-
- error = -EINVAL;
- if (!dip->i_inode.i_nlink)
- goto out_gunlock;
- error = -EFBIG;
- if (dip->i_entries == (u32)-1)
- goto out_gunlock;
- error = -EPERM;
- if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
- goto out_gunlock;
- error = -EINVAL;
- if (!ip->i_inode.i_nlink)
- goto out_gunlock;
- error = -EMLINK;
- if (ip->i_inode.i_nlink == (u32)-1)
- goto out_gunlock;
-
- alloc_required = error = gfs2_diradd_alloc_required(dir, &dentry->d_name);
- if (error < 0)
- goto out_gunlock;
- error = 0;
-
- if (alloc_required) {
- struct gfs2_alloc *al = gfs2_alloc_get(dip);
- if (!al) {
- error = -ENOMEM;
- goto out_gunlock;
- }
-
- error = gfs2_quota_lock_check(dip);
- if (error)
- goto out_alloc;
-
- al->al_requested = sdp->sd_max_dirres;
-
- error = gfs2_inplace_reserve(dip);
- if (error)
- goto out_gunlock_q;
-
- error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
- gfs2_rg_blocks(al) +
- 2 * RES_DINODE + RES_STATFS +
- RES_QUOTA, 0);
- if (error)
- goto out_ipres;
- } else {
- error = gfs2_trans_begin(sdp, 2 * RES_DINODE + RES_LEAF, 0);
- if (error)
- goto out_ipres;
- }
-
- error = gfs2_dir_add(dir, &dentry->d_name, ip, IF2DT(inode->i_mode));
- if (error)
- goto out_end_trans;
-
- error = gfs2_change_nlink(ip, +1);
-
-out_end_trans:
- gfs2_trans_end(sdp);
-out_ipres:
- if (alloc_required)
- gfs2_inplace_release(dip);
-out_gunlock_q:
- if (alloc_required)
- gfs2_quota_unlock(dip);
-out_alloc:
- if (alloc_required)
- gfs2_alloc_put(dip);
-out_gunlock:
- gfs2_glock_dq(ghs + 1);
-out_child:
- gfs2_glock_dq(ghs);
-out_parent:
- gfs2_holder_uninit(ghs);
- gfs2_holder_uninit(ghs + 1);
- if (!error) {
- ihold(inode);
- d_instantiate(dentry, inode);
- mark_inode_dirty(inode);
- }
- return error;
-}
-
-/*
- * gfs2_unlink_ok - check to see that a inode is still in a directory
- * @dip: the directory
- * @name: the name of the file
- * @ip: the inode
- *
- * Assumes that the lock on (at least) @dip is held.
- *
- * Returns: 0 if the parent/child relationship is correct, errno if it isn't
- */
-
-static int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
- const struct gfs2_inode *ip)
-{
- int error;
-
- if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
- return -EPERM;
-
- if ((dip->i_inode.i_mode & S_ISVTX) &&
- dip->i_inode.i_uid != current_fsuid() &&
- ip->i_inode.i_uid != current_fsuid() && !capable(CAP_FOWNER))
- return -EPERM;
-
- if (IS_APPEND(&dip->i_inode))
- return -EPERM;
-
- error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC, 0);
- if (error)
- return error;
-
- error = gfs2_dir_check(&dip->i_inode, name, ip);
- if (error)
- return error;
-
- return 0;
-}
-
-/**
- * gfs2_unlink - Unlink a file
- * @dir: The inode of the directory containing the file to unlink
- * @dentry: The file itself
- *
- * Unlink a file. Call gfs2_unlinki()
- *
- * Returns: errno
- */
-
-static int gfs2_unlink(struct inode *dir, struct dentry *dentry)
-{
- struct gfs2_inode *dip = GFS2_I(dir);
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_holder ghs[3];
- struct gfs2_rgrpd *rgd;
- struct gfs2_holder ri_gh;
- int error;
-
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- return error;
-
- gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
-
- rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
- gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
-
-
- error = gfs2_glock_nq(ghs); /* parent */
- if (error)
- goto out_parent;
-
- error = gfs2_glock_nq(ghs + 1); /* child */
- if (error)
- goto out_child;
-
- error = gfs2_glock_nq(ghs + 2); /* rgrp */
- if (error)
- goto out_rgrp;
-
- error = gfs2_unlink_ok(dip, &dentry->d_name, ip);
- if (error)
- goto out_gunlock;
-
- error = gfs2_trans_begin(sdp, 2*RES_DINODE + RES_LEAF + RES_RG_BIT, 0);
- if (error)
- goto out_gunlock;
-
- error = gfs2_dir_del(dip, &dentry->d_name);
- if (error)
- goto out_end_trans;
-
- error = gfs2_change_nlink(ip, -1);
-
-out_end_trans:
- gfs2_trans_end(sdp);
-out_gunlock:
- gfs2_glock_dq(ghs + 2);
-out_rgrp:
- gfs2_holder_uninit(ghs + 2);
- gfs2_glock_dq(ghs + 1);
-out_child:
- gfs2_holder_uninit(ghs + 1);
- gfs2_glock_dq(ghs);
-out_parent:
- gfs2_holder_uninit(ghs);
- gfs2_glock_dq_uninit(&ri_gh);
- return error;
-}
-
-/**
- * gfs2_symlink - Create a symlink
- * @dir: The directory to create the symlink in
- * @dentry: The dentry to put the symlink in
- * @symname: The thing which the link points to
- *
- * Returns: errno
- */
-
-static int gfs2_symlink(struct inode *dir, struct dentry *dentry,
- const char *symname)
-{
- struct gfs2_inode *dip = GFS2_I(dir), *ip;
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct gfs2_holder ghs[2];
- struct inode *inode;
- struct buffer_head *dibh;
- int size;
- int error;
-
- /* Must be stuffed with a null terminator for gfs2_follow_link() */
- size = strlen(symname);
- if (size > sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode) - 1)
- return -ENAMETOOLONG;
-
- gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
- inode = gfs2_createi(ghs, &dentry->d_name, S_IFLNK | S_IRWXUGO, 0);
- if (IS_ERR(inode)) {
- gfs2_holder_uninit(ghs);
- return PTR_ERR(inode);
- }
-
- ip = ghs[1].gh_gl->gl_object;
-
- i_size_write(inode, size);
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
-
- if (!gfs2_assert_withdraw(sdp, !error)) {
- gfs2_dinode_out(ip, dibh->b_data);
- memcpy(dibh->b_data + sizeof(struct gfs2_dinode), symname,
- size);
- brelse(dibh);
- }
-
- gfs2_trans_end(sdp);
- if (dip->i_alloc->al_rgd)
- gfs2_inplace_release(dip);
- gfs2_quota_unlock(dip);
- gfs2_alloc_put(dip);
-
- gfs2_glock_dq_uninit_m(2, ghs);
-
- d_instantiate(dentry, inode);
- mark_inode_dirty(inode);
-
- return 0;
-}
-
-/**
- * gfs2_mkdir - Make a directory
- * @dir: The parent directory of the new one
- * @dentry: The dentry of the new directory
- * @mode: The mode of the new directory
- *
- * Returns: errno
- */
-
-static int gfs2_mkdir(struct inode *dir, struct dentry *dentry, int mode)
-{
- struct gfs2_inode *dip = GFS2_I(dir), *ip;
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct gfs2_holder ghs[2];
- struct inode *inode;
- struct buffer_head *dibh;
- int error;
-
- gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
- inode = gfs2_createi(ghs, &dentry->d_name, S_IFDIR | mode, 0);
- if (IS_ERR(inode)) {
- gfs2_holder_uninit(ghs);
- return PTR_ERR(inode);
- }
-
- ip = ghs[1].gh_gl->gl_object;
-
- ip->i_inode.i_nlink = 2;
- i_size_write(inode, sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode));
- ip->i_diskflags |= GFS2_DIF_JDATA;
- ip->i_entries = 2;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
-
- if (!gfs2_assert_withdraw(sdp, !error)) {
- struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
- struct gfs2_dirent *dent = (struct gfs2_dirent *)(di+1);
-
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_qstr2dirent(&gfs2_qdot, GFS2_DIRENT_SIZE(gfs2_qdot.len), dent);
- dent->de_inum = di->di_num; /* already GFS2 endian */
- dent->de_type = cpu_to_be16(DT_DIR);
- di->di_entries = cpu_to_be32(1);
-
- dent = (struct gfs2_dirent *)((char*)dent + GFS2_DIRENT_SIZE(1));
- gfs2_qstr2dirent(&gfs2_qdotdot, dibh->b_size - GFS2_DIRENT_SIZE(1) - sizeof(struct gfs2_dinode), dent);
-
- gfs2_inum_out(dip, dent);
- dent->de_type = cpu_to_be16(DT_DIR);
-
- gfs2_dinode_out(ip, di);
-
- brelse(dibh);
- }
-
- error = gfs2_change_nlink(dip, +1);
- gfs2_assert_withdraw(sdp, !error); /* dip already pinned */
-
- gfs2_trans_end(sdp);
- if (dip->i_alloc->al_rgd)
- gfs2_inplace_release(dip);
- gfs2_quota_unlock(dip);
- gfs2_alloc_put(dip);
-
- gfs2_glock_dq_uninit_m(2, ghs);
-
- d_instantiate(dentry, inode);
- mark_inode_dirty(inode);
-
- return 0;
-}
-
-/**
- * gfs2_rmdiri - Remove a directory
- * @dip: The parent directory of the directory to be removed
- * @name: The name of the directory to be removed
- * @ip: The GFS2 inode of the directory to be removed
- *
- * Assumes Glocks on dip and ip are held
- *
- * Returns: errno
- */
-
-static int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
- struct gfs2_inode *ip)
-{
- int error;
-
- if (ip->i_entries != 2) {
- if (gfs2_consist_inode(ip))
- gfs2_dinode_print(ip);
- return -EIO;
- }
-
- error = gfs2_dir_del(dip, name);
- if (error)
- return error;
-
- error = gfs2_change_nlink(dip, -1);
- if (error)
- return error;
-
- error = gfs2_dir_del(ip, &gfs2_qdot);
- if (error)
- return error;
-
- error = gfs2_dir_del(ip, &gfs2_qdotdot);
- if (error)
- return error;
-
- /* It looks odd, but it really should be done twice */
- error = gfs2_change_nlink(ip, -1);
- if (error)
- return error;
-
- error = gfs2_change_nlink(ip, -1);
- if (error)
- return error;
-
- return error;
-}
-
-/**
- * gfs2_rmdir - Remove a directory
- * @dir: The parent directory of the directory to be removed
- * @dentry: The dentry of the directory to remove
- *
- * Remove a directory. Call gfs2_rmdiri()
- *
- * Returns: errno
- */
-
-static int gfs2_rmdir(struct inode *dir, struct dentry *dentry)
-{
- struct gfs2_inode *dip = GFS2_I(dir);
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_holder ghs[3];
- struct gfs2_rgrpd *rgd;
- struct gfs2_holder ri_gh;
- int error;
-
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- return error;
- gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
-
- rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
- gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
-
- error = gfs2_glock_nq(ghs); /* parent */
- if (error)
- goto out_parent;
-
- error = gfs2_glock_nq(ghs + 1); /* child */
- if (error)
- goto out_child;
-
- error = gfs2_glock_nq(ghs + 2); /* rgrp */
- if (error)
- goto out_rgrp;
-
- error = gfs2_unlink_ok(dip, &dentry->d_name, ip);
- if (error)
- goto out_gunlock;
-
- if (ip->i_entries < 2) {
- if (gfs2_consist_inode(ip))
- gfs2_dinode_print(ip);
- error = -EIO;
- goto out_gunlock;
- }
- if (ip->i_entries > 2) {
- error = -ENOTEMPTY;
- goto out_gunlock;
- }
-
- error = gfs2_trans_begin(sdp, 2 * RES_DINODE + 3 * RES_LEAF + RES_RG_BIT, 0);
- if (error)
- goto out_gunlock;
-
- error = gfs2_rmdiri(dip, &dentry->d_name, ip);
-
- gfs2_trans_end(sdp);
-
-out_gunlock:
- gfs2_glock_dq(ghs + 2);
-out_rgrp:
- gfs2_holder_uninit(ghs + 2);
- gfs2_glock_dq(ghs + 1);
-out_child:
- gfs2_holder_uninit(ghs + 1);
- gfs2_glock_dq(ghs);
-out_parent:
- gfs2_holder_uninit(ghs);
- gfs2_glock_dq_uninit(&ri_gh);
- return error;
-}
-
-/**
- * gfs2_mknod - Make a special file
- * @dir: The directory in which the special file will reside
- * @dentry: The dentry of the special file
- * @mode: The mode of the special file
- * @rdev: The device specification of the special file
- *
- */
-
-static int gfs2_mknod(struct inode *dir, struct dentry *dentry, int mode,
- dev_t dev)
-{
- struct gfs2_inode *dip = GFS2_I(dir);
- struct gfs2_sbd *sdp = GFS2_SB(dir);
- struct gfs2_holder ghs[2];
- struct inode *inode;
-
- gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
- inode = gfs2_createi(ghs, &dentry->d_name, mode, dev);
- if (IS_ERR(inode)) {
- gfs2_holder_uninit(ghs);
- return PTR_ERR(inode);
- }
-
- gfs2_trans_end(sdp);
- if (dip->i_alloc->al_rgd)
- gfs2_inplace_release(dip);
- gfs2_quota_unlock(dip);
- gfs2_alloc_put(dip);
-
- gfs2_glock_dq_uninit_m(2, ghs);
-
- d_instantiate(dentry, inode);
- mark_inode_dirty(inode);
-
- return 0;
-}
-
-/*
- * gfs2_ok_to_move - check if it's ok to move a directory to another directory
- * @this: move this
- * @to: to here
- *
- * Follow @to back to the root and make sure we don't encounter @this
- * Assumes we already hold the rename lock.
- *
- * Returns: errno
- */
-
-static int gfs2_ok_to_move(struct gfs2_inode *this, struct gfs2_inode *to)
-{
- struct inode *dir = &to->i_inode;
- struct super_block *sb = dir->i_sb;
- struct inode *tmp;
- int error = 0;
-
- igrab(dir);
-
- for (;;) {
- if (dir == &this->i_inode) {
- error = -EINVAL;
- break;
- }
- if (dir == sb->s_root->d_inode) {
- error = 0;
- break;
- }
-
- tmp = gfs2_lookupi(dir, &gfs2_qdotdot, 1);
- if (IS_ERR(tmp)) {
- error = PTR_ERR(tmp);
- break;
- }
-
- iput(dir);
- dir = tmp;
- }
-
- iput(dir);
-
- return error;
-}
-
-/**
- * gfs2_rename - Rename a file
- * @odir: Parent directory of old file name
- * @odentry: The old dentry of the file
- * @ndir: Parent directory of new file name
- * @ndentry: The new dentry of the file
- *
- * Returns: errno
- */
-
-static int gfs2_rename(struct inode *odir, struct dentry *odentry,
- struct inode *ndir, struct dentry *ndentry)
-{
- struct gfs2_inode *odip = GFS2_I(odir);
- struct gfs2_inode *ndip = GFS2_I(ndir);
- struct gfs2_inode *ip = GFS2_I(odentry->d_inode);
- struct gfs2_inode *nip = NULL;
- struct gfs2_sbd *sdp = GFS2_SB(odir);
- struct gfs2_holder ghs[5], r_gh = { .gh_gl = NULL, }, ri_gh;
- struct gfs2_rgrpd *nrgd;
- unsigned int num_gh;
- int dir_rename = 0;
- int alloc_required = 0;
- unsigned int x;
- int error;
-
- if (ndentry->d_inode) {
- nip = GFS2_I(ndentry->d_inode);
- if (ip == nip)
- return 0;
- }
-
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- return error;
-
- if (odip != ndip) {
- error = gfs2_glock_nq_init(sdp->sd_rename_gl, LM_ST_EXCLUSIVE,
- 0, &r_gh);
- if (error)
- goto out;
-
- if (S_ISDIR(ip->i_inode.i_mode)) {
- dir_rename = 1;
- /* don't move a dirctory into it's subdir */
- error = gfs2_ok_to_move(ip, ndip);
- if (error)
- goto out_gunlock_r;
- }
- }
-
- num_gh = 1;
- gfs2_holder_init(odip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
- if (odip != ndip) {
- gfs2_holder_init(ndip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
- num_gh++;
- }
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
- num_gh++;
-
- if (nip) {
- gfs2_holder_init(nip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
- num_gh++;
- /* grab the resource lock for unlink flag twiddling
- * this is the case of the target file already existing
- * so we unlink before doing the rename
- */
- nrgd = gfs2_blk2rgrpd(sdp, nip->i_no_addr);
- if (nrgd)
- gfs2_holder_init(nrgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh++);
- }
-
- for (x = 0; x < num_gh; x++) {
- error = gfs2_glock_nq(ghs + x);
- if (error)
- goto out_gunlock;
- }
-
- /* Check out the old directory */
-
- error = gfs2_unlink_ok(odip, &odentry->d_name, ip);
- if (error)
- goto out_gunlock;
-
- /* Check out the new directory */
-
- if (nip) {
- error = gfs2_unlink_ok(ndip, &ndentry->d_name, nip);
- if (error)
- goto out_gunlock;
-
- if (S_ISDIR(nip->i_inode.i_mode)) {
- if (nip->i_entries < 2) {
- if (gfs2_consist_inode(nip))
- gfs2_dinode_print(nip);
- error = -EIO;
- goto out_gunlock;
- }
- if (nip->i_entries > 2) {
- error = -ENOTEMPTY;
- goto out_gunlock;
- }
- }
- } else {
- error = gfs2_permission(ndir, MAY_WRITE | MAY_EXEC, 0);
- if (error)
- goto out_gunlock;
-
- error = gfs2_dir_check(ndir, &ndentry->d_name, NULL);
- switch (error) {
- case -ENOENT:
- error = 0;
- break;
- case 0:
- error = -EEXIST;
- default:
- goto out_gunlock;
- };
-
- if (odip != ndip) {
- if (!ndip->i_inode.i_nlink) {
- error = -EINVAL;
- goto out_gunlock;
- }
- if (ndip->i_entries == (u32)-1) {
- error = -EFBIG;
- goto out_gunlock;
- }
- if (S_ISDIR(ip->i_inode.i_mode) &&
- ndip->i_inode.i_nlink == (u32)-1) {
- error = -EMLINK;
- goto out_gunlock;
- }
- }
- }
-
- /* Check out the dir to be renamed */
-
- if (dir_rename) {
- error = gfs2_permission(odentry->d_inode, MAY_WRITE, 0);
- if (error)
- goto out_gunlock;
- }
-
- if (nip == NULL)
- alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
- error = alloc_required;
- if (error < 0)
- goto out_gunlock;
- error = 0;
-
- if (alloc_required) {
- struct gfs2_alloc *al = gfs2_alloc_get(ndip);
- if (!al) {
- error = -ENOMEM;
- goto out_gunlock;
- }
-
- error = gfs2_quota_lock_check(ndip);
- if (error)
- goto out_alloc;
-
- al->al_requested = sdp->sd_max_dirres;
-
- error = gfs2_inplace_reserve_ri(ndip);
- if (error)
- goto out_gunlock_q;
-
- error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
- gfs2_rg_blocks(al) +
- 4 * RES_DINODE + 4 * RES_LEAF +
- RES_STATFS + RES_QUOTA + 4, 0);
- if (error)
- goto out_ipreserv;
- } else {
- error = gfs2_trans_begin(sdp, 4 * RES_DINODE +
- 5 * RES_LEAF + 4, 0);
- if (error)
- goto out_gunlock;
- }
-
- /* Remove the target file, if it exists */
-
- if (nip) {
- if (S_ISDIR(nip->i_inode.i_mode))
- error = gfs2_rmdiri(ndip, &ndentry->d_name, nip);
- else {
- error = gfs2_dir_del(ndip, &ndentry->d_name);
- if (error)
- goto out_end_trans;
- error = gfs2_change_nlink(nip, -1);
- }
- if (error)
- goto out_end_trans;
- }
-
- if (dir_rename) {
- error = gfs2_change_nlink(ndip, +1);
- if (error)
- goto out_end_trans;
- error = gfs2_change_nlink(odip, -1);
- if (error)
- goto out_end_trans;
-
- error = gfs2_dir_mvino(ip, &gfs2_qdotdot, ndip, DT_DIR);
- if (error)
- goto out_end_trans;
- } else {
- struct buffer_head *dibh;
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (error)
- goto out_end_trans;
- ip->i_inode.i_ctime = CURRENT_TIME;
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
- error = gfs2_dir_del(odip, &odentry->d_name);
- if (error)
- goto out_end_trans;
-
- error = gfs2_dir_add(ndir, &ndentry->d_name, ip, IF2DT(ip->i_inode.i_mode));
- if (error)
- goto out_end_trans;
-
-out_end_trans:
- gfs2_trans_end(sdp);
-out_ipreserv:
- if (alloc_required)
- gfs2_inplace_release(ndip);
-out_gunlock_q:
- if (alloc_required)
- gfs2_quota_unlock(ndip);
-out_alloc:
- if (alloc_required)
- gfs2_alloc_put(ndip);
-out_gunlock:
- while (x--) {
- gfs2_glock_dq(ghs + x);
- gfs2_holder_uninit(ghs + x);
- }
-out_gunlock_r:
- if (r_gh.gh_gl)
- gfs2_glock_dq_uninit(&r_gh);
-out:
- gfs2_glock_dq_uninit(&ri_gh);
- return error;
-}
-
-/**
- * gfs2_follow_link - Follow a symbolic link
- * @dentry: The dentry of the link
- * @nd: Data that we pass to vfs_follow_link()
- *
- * This can handle symlinks of any size.
- *
- * Returns: 0 on success or error code
- */
-
-static void *gfs2_follow_link(struct dentry *dentry, struct nameidata *nd)
-{
- struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_holder i_gh;
- struct buffer_head *dibh;
- unsigned int x, size;
- char *buf;
- int error;
-
- gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
- error = gfs2_glock_nq(&i_gh);
- if (error) {
- gfs2_holder_uninit(&i_gh);
- nd_set_link(nd, ERR_PTR(error));
- return NULL;
- }
-
- size = (unsigned int)i_size_read(&ip->i_inode);
- if (size == 0) {
- gfs2_consist_inode(ip);
- buf = ERR_PTR(-EIO);
- goto out;
- }
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (error) {
- buf = ERR_PTR(error);
- goto out;
- }
-
- x = size + 1;
- buf = kmalloc(x, GFP_NOFS);
- if (!buf)
- buf = ERR_PTR(-ENOMEM);
- else
- memcpy(buf, dibh->b_data + sizeof(struct gfs2_dinode), x);
- brelse(dibh);
-out:
- gfs2_glock_dq_uninit(&i_gh);
- nd_set_link(nd, buf);
- return NULL;
-}
-
-static void gfs2_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
-{
- char *s = nd_get_link(nd);
- if (!IS_ERR(s))
- kfree(s);
-}
-
-/**
- * gfs2_permission -
- * @inode: The inode
- * @mask: The mask to be tested
- * @flags: Indicates whether this is an RCU path walk or not
- *
- * This may be called from the VFS directly, or from within GFS2 with the
- * inode locked, so we look to see if the glock is already locked and only
- * lock the glock if its not already been done.
- *
- * Returns: errno
- */
-
-int gfs2_permission(struct inode *inode, int mask, unsigned int flags)
-{
- struct gfs2_inode *ip;
- struct gfs2_holder i_gh;
- int error;
- int unlock = 0;
-
-
- ip = GFS2_I(inode);
- if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- if (error)
- return error;
- unlock = 1;
- }
-
- if ((mask & MAY_WRITE) && IS_IMMUTABLE(inode))
- error = -EACCES;
- else
- error = generic_permission(inode, mask, flags, gfs2_check_acl);
- if (unlock)
- gfs2_glock_dq_uninit(&i_gh);
-
- return error;
-}
-
-static int setattr_chown(struct inode *inode, struct iattr *attr)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_sbd *sdp = GFS2_SB(inode);
- u32 ouid, ogid, nuid, ngid;
- int error;
-
- ouid = inode->i_uid;
- ogid = inode->i_gid;
- nuid = attr->ia_uid;
- ngid = attr->ia_gid;
-
- if (!(attr->ia_valid & ATTR_UID) || ouid == nuid)
- ouid = nuid = NO_QUOTA_CHANGE;
- if (!(attr->ia_valid & ATTR_GID) || ogid == ngid)
- ogid = ngid = NO_QUOTA_CHANGE;
-
- if (!gfs2_alloc_get(ip))
- return -ENOMEM;
-
- error = gfs2_quota_lock(ip, nuid, ngid);
- if (error)
- goto out_alloc;
-
- if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
- error = gfs2_quota_check(ip, nuid, ngid);
- if (error)
- goto out_gunlock_q;
- }
-
- error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_QUOTA, 0);
- if (error)
- goto out_gunlock_q;
-
- error = gfs2_setattr_simple(ip, attr);
- if (error)
- goto out_end_trans;
-
- if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
- u64 blocks = gfs2_get_inode_blocks(&ip->i_inode);
- gfs2_quota_change(ip, -blocks, ouid, ogid);
- gfs2_quota_change(ip, blocks, nuid, ngid);
- }
-
-out_end_trans:
- gfs2_trans_end(sdp);
-out_gunlock_q:
- gfs2_quota_unlock(ip);
-out_alloc:
- gfs2_alloc_put(ip);
- return error;
-}
-
-/**
- * gfs2_setattr - Change attributes on an inode
- * @dentry: The dentry which is changing
- * @attr: The structure describing the change
- *
- * The VFS layer wants to change one or more of an inodes attributes. Write
- * that change out to disk.
- *
- * Returns: errno
- */
-
-static int gfs2_setattr(struct dentry *dentry, struct iattr *attr)
-{
- struct inode *inode = dentry->d_inode;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder i_gh;
- int error;
-
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
- if (error)
- return error;
-
- error = -EPERM;
- if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
- goto out;
-
- error = inode_change_ok(inode, attr);
- if (error)
- goto out;
-
- if (attr->ia_valid & ATTR_SIZE)
- error = gfs2_setattr_size(inode, attr->ia_size);
- else if (attr->ia_valid & (ATTR_UID | ATTR_GID))
- error = setattr_chown(inode, attr);
- else if ((attr->ia_valid & ATTR_MODE) && IS_POSIXACL(inode))
- error = gfs2_acl_chmod(ip, attr);
- else
- error = gfs2_setattr_simple(ip, attr);
-
-out:
- gfs2_glock_dq_uninit(&i_gh);
- if (!error)
- mark_inode_dirty(inode);
- return error;
-}
-
-/**
- * gfs2_getattr - Read out an inode's attributes
- * @mnt: The vfsmount the inode is being accessed from
- * @dentry: The dentry to stat
- * @stat: The inode's stats
- *
- * This may be called from the VFS directly, or from within GFS2 with the
- * inode locked, so we look to see if the glock is already locked and only
- * lock the glock if its not already been done. Note that its the NFS
- * readdirplus operation which causes this to be called (from filldir)
- * with the glock already held.
- *
- * Returns: errno
- */
-
-static int gfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
- struct kstat *stat)
-{
- struct inode *inode = dentry->d_inode;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder gh;
- int error;
- int unlock = 0;
-
- if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
- if (error)
- return error;
- unlock = 1;
- }
-
- generic_fillattr(inode, stat);
- if (unlock)
- gfs2_glock_dq_uninit(&gh);
-
- return 0;
-}
-
-static int gfs2_setxattr(struct dentry *dentry, const char *name,
- const void *data, size_t size, int flags)
-{
- struct inode *inode = dentry->d_inode;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder gh;
- int ret;
-
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
- ret = gfs2_glock_nq(&gh);
- if (ret == 0) {
- ret = generic_setxattr(dentry, name, data, size, flags);
- gfs2_glock_dq(&gh);
- }
- gfs2_holder_uninit(&gh);
- return ret;
-}
-
-static ssize_t gfs2_getxattr(struct dentry *dentry, const char *name,
- void *data, size_t size)
-{
- struct inode *inode = dentry->d_inode;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder gh;
- int ret;
-
- gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
- ret = gfs2_glock_nq(&gh);
- if (ret == 0) {
- ret = generic_getxattr(dentry, name, data, size);
- gfs2_glock_dq(&gh);
- }
- gfs2_holder_uninit(&gh);
- return ret;
-}
-
-static int gfs2_removexattr(struct dentry *dentry, const char *name)
-{
- struct inode *inode = dentry->d_inode;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder gh;
- int ret;
-
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
- ret = gfs2_glock_nq(&gh);
- if (ret == 0) {
- ret = generic_removexattr(dentry, name);
- gfs2_glock_dq(&gh);
- }
- gfs2_holder_uninit(&gh);
- return ret;
-}
-
-static int gfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
- u64 start, u64 len)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
- struct gfs2_holder gh;
- int ret;
-
- ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
- if (ret)
- return ret;
-
- mutex_lock(&inode->i_mutex);
-
- ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
- if (ret)
- goto out;
-
- if (gfs2_is_stuffed(ip)) {
- u64 phys = ip->i_no_addr << inode->i_blkbits;
- u64 size = i_size_read(inode);
- u32 flags = FIEMAP_EXTENT_LAST|FIEMAP_EXTENT_NOT_ALIGNED|
- FIEMAP_EXTENT_DATA_INLINE;
- phys += sizeof(struct gfs2_dinode);
- phys += start;
- if (start + len > size)
- len = size - start;
- if (start < size)
- ret = fiemap_fill_next_extent(fieinfo, start, phys,
- len, flags);
- if (ret == 1)
- ret = 0;
- } else {
- ret = __generic_block_fiemap(inode, fieinfo, start, len,
- gfs2_block_map);
- }
-
- gfs2_glock_dq_uninit(&gh);
-out:
- mutex_unlock(&inode->i_mutex);
- return ret;
-}
-
-const struct inode_operations gfs2_file_iops = {
- .permission = gfs2_permission,
- .setattr = gfs2_setattr,
- .getattr = gfs2_getattr,
- .setxattr = gfs2_setxattr,
- .getxattr = gfs2_getxattr,
- .listxattr = gfs2_listxattr,
- .removexattr = gfs2_removexattr,
- .fiemap = gfs2_fiemap,
-};
-
-const struct inode_operations gfs2_dir_iops = {
- .create = gfs2_create,
- .lookup = gfs2_lookup,
- .link = gfs2_link,
- .unlink = gfs2_unlink,
- .symlink = gfs2_symlink,
- .mkdir = gfs2_mkdir,
- .rmdir = gfs2_rmdir,
- .mknod = gfs2_mknod,
- .rename = gfs2_rename,
- .permission = gfs2_permission,
- .setattr = gfs2_setattr,
- .getattr = gfs2_getattr,
- .setxattr = gfs2_setxattr,
- .getxattr = gfs2_getxattr,
- .listxattr = gfs2_listxattr,
- .removexattr = gfs2_removexattr,
- .fiemap = gfs2_fiemap,
-};
-
-const struct inode_operations gfs2_symlink_iops = {
- .readlink = generic_readlink,
- .follow_link = gfs2_follow_link,
- .put_link = gfs2_put_link,
- .permission = gfs2_permission,
- .setattr = gfs2_setattr,
- .getattr = gfs2_getattr,
- .setxattr = gfs2_setxattr,
- .getxattr = gfs2_getxattr,
- .listxattr = gfs2_listxattr,
- .removexattr = gfs2_removexattr,
- .fiemap = gfs2_fiemap,
-};
-
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 6fcae84..7273ad3 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -78,10 +78,11 @@
static inline void gfs2_setbit(struct gfs2_rgrpd *rgd, unsigned char *buf1,
unsigned char *buf2, unsigned int offset,
- unsigned int buflen, u32 block,
+ struct gfs2_bitmap *bi, u32 block,
unsigned char new_state)
{
unsigned char *byte1, *byte2, *end, cur_state;
+ unsigned int buflen = bi->bi_len;
const unsigned int bit = (block % GFS2_NBBY) * GFS2_BIT_SIZE;
byte1 = buf1 + offset + (block / GFS2_NBBY);
@@ -92,6 +93,16 @@
cur_state = (*byte1 >> bit) & GFS2_BIT_MASK;
if (unlikely(!valid_change[new_state * 4 + cur_state])) {
+ printk(KERN_WARNING "GFS2: buf_blk = 0x%llx old_state=%d, "
+ "new_state=%d\n",
+ (unsigned long long)block, cur_state, new_state);
+ printk(KERN_WARNING "GFS2: rgrp=0x%llx bi_start=0x%lx\n",
+ (unsigned long long)rgd->rd_addr,
+ (unsigned long)bi->bi_start);
+ printk(KERN_WARNING "GFS2: bi_offset=0x%lx bi_len=0x%lx\n",
+ (unsigned long)bi->bi_offset,
+ (unsigned long)bi->bi_len);
+ dump_stack();
gfs2_consist_rgrpd(rgd);
return;
}
@@ -381,6 +392,7 @@
if (gl) {
gl->gl_object = NULL;
+ gfs2_glock_add_to_lru(gl);
gfs2_glock_put(gl);
}
@@ -1365,7 +1377,7 @@
gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone, bi->bi_offset,
- bi->bi_len, blk, new_state);
+ bi, blk, new_state);
goal = blk;
while (*n < elen) {
goal++;
@@ -1375,7 +1387,7 @@
GFS2_BLKST_FREE)
break;
gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone, bi->bi_offset,
- bi->bi_len, goal, new_state);
+ bi, goal, new_state);
(*n)++;
}
out:
@@ -1432,7 +1444,7 @@
}
gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
gfs2_setbit(rgd, bi->bi_bh->b_data, NULL, bi->bi_offset,
- bi->bi_len, buf_blk, new_state);
+ bi, buf_blk, new_state);
}
return rgd;
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index b9f28e6..ed540e7 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -23,6 +23,7 @@
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/writeback.h>
+#include <linux/backing-dev.h>
#include "gfs2.h"
#include "incore.h"
@@ -700,11 +701,47 @@
mutex_unlock(&sdp->sd_freeze_lock);
}
+void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf)
+{
+ struct gfs2_dinode *str = buf;
+
+ str->di_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
+ str->di_header.mh_type = cpu_to_be32(GFS2_METATYPE_DI);
+ str->di_header.mh_format = cpu_to_be32(GFS2_FORMAT_DI);
+ str->di_num.no_addr = cpu_to_be64(ip->i_no_addr);
+ str->di_num.no_formal_ino = cpu_to_be64(ip->i_no_formal_ino);
+ str->di_mode = cpu_to_be32(ip->i_inode.i_mode);
+ str->di_uid = cpu_to_be32(ip->i_inode.i_uid);
+ str->di_gid = cpu_to_be32(ip->i_inode.i_gid);
+ str->di_nlink = cpu_to_be32(ip->i_inode.i_nlink);
+ str->di_size = cpu_to_be64(i_size_read(&ip->i_inode));
+ str->di_blocks = cpu_to_be64(gfs2_get_inode_blocks(&ip->i_inode));
+ str->di_atime = cpu_to_be64(ip->i_inode.i_atime.tv_sec);
+ str->di_mtime = cpu_to_be64(ip->i_inode.i_mtime.tv_sec);
+ str->di_ctime = cpu_to_be64(ip->i_inode.i_ctime.tv_sec);
+
+ str->di_goal_meta = cpu_to_be64(ip->i_goal);
+ str->di_goal_data = cpu_to_be64(ip->i_goal);
+ str->di_generation = cpu_to_be64(ip->i_generation);
+
+ str->di_flags = cpu_to_be32(ip->i_diskflags);
+ str->di_height = cpu_to_be16(ip->i_height);
+ str->di_payload_format = cpu_to_be32(S_ISDIR(ip->i_inode.i_mode) &&
+ !(ip->i_diskflags & GFS2_DIF_EXHASH) ?
+ GFS2_FORMAT_DE : 0);
+ str->di_depth = cpu_to_be16(ip->i_depth);
+ str->di_entries = cpu_to_be32(ip->i_entries);
+
+ str->di_eattr = cpu_to_be64(ip->i_eattr);
+ str->di_atime_nsec = cpu_to_be32(ip->i_inode.i_atime.tv_nsec);
+ str->di_mtime_nsec = cpu_to_be32(ip->i_inode.i_mtime.tv_nsec);
+ str->di_ctime_nsec = cpu_to_be32(ip->i_inode.i_ctime.tv_nsec);
+}
/**
* gfs2_write_inode - Make sure the inode is stable on the disk
* @inode: The inode
- * @sync: synchronous write flag
+ * @wbc: The writeback control structure
*
* Returns: errno
*/
@@ -713,15 +750,17 @@
{
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct address_space *metamapping = gfs2_glock2aspace(ip->i_gl);
+ struct backing_dev_info *bdi = metamapping->backing_dev_info;
struct gfs2_holder gh;
struct buffer_head *bh;
struct timespec atime;
struct gfs2_dinode *di;
- int ret = 0;
+ int ret = -EAGAIN;
- /* Check this is a "normal" inode, etc */
+ /* Skip timestamp update, if this is from a memalloc */
if (current->flags & PF_MEMALLOC)
- return 0;
+ goto do_flush;
ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
if (ret)
goto do_flush;
@@ -745,6 +784,13 @@
do_flush:
if (wbc->sync_mode == WB_SYNC_ALL)
gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
+ filemap_fdatawrite(metamapping);
+ if (bdi->dirty_exceeded)
+ gfs2_ail1_flush(sdp, wbc);
+ if (!ret && (wbc->sync_mode == WB_SYNC_ALL))
+ ret = filemap_fdatawait(metamapping);
+ if (ret)
+ mark_inode_dirty_sync(inode);
return ret;
}
@@ -874,8 +920,9 @@
static int gfs2_sync_fs(struct super_block *sb, int wait)
{
- if (wait && sb->s_fs_info)
- gfs2_log_flush(sb->s_fs_info, NULL);
+ struct gfs2_sbd *sdp = sb->s_fs_info;
+ if (wait && sdp)
+ gfs2_log_flush(sdp, NULL);
return 0;
}
@@ -1308,6 +1355,78 @@
return 0;
}
+static void gfs2_final_release_pages(struct gfs2_inode *ip)
+{
+ struct inode *inode = &ip->i_inode;
+ struct gfs2_glock *gl = ip->i_gl;
+
+ truncate_inode_pages(gfs2_glock2aspace(ip->i_gl), 0);
+ truncate_inode_pages(&inode->i_data, 0);
+
+ if (atomic_read(&gl->gl_revokes) == 0) {
+ clear_bit(GLF_LFLUSH, &gl->gl_flags);
+ clear_bit(GLF_DIRTY, &gl->gl_flags);
+ }
+}
+
+static int gfs2_dinode_dealloc(struct gfs2_inode *ip)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct gfs2_alloc *al;
+ struct gfs2_rgrpd *rgd;
+ int error;
+
+ if (gfs2_get_inode_blocks(&ip->i_inode) != 1) {
+ gfs2_consist_inode(ip);
+ return -EIO;
+ }
+
+ al = gfs2_alloc_get(ip);
+ if (!al)
+ return -ENOMEM;
+
+ error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
+ if (error)
+ goto out;
+
+ error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
+ if (error)
+ goto out_qs;
+
+ rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
+ if (!rgd) {
+ gfs2_consist_inode(ip);
+ error = -EIO;
+ goto out_rindex_relse;
+ }
+
+ error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
+ &al->al_rgd_gh);
+ if (error)
+ goto out_rindex_relse;
+
+ error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_STATFS + RES_QUOTA,
+ sdp->sd_jdesc->jd_blocks);
+ if (error)
+ goto out_rg_gunlock;
+
+ gfs2_free_di(rgd, ip);
+
+ gfs2_final_release_pages(ip);
+
+ gfs2_trans_end(sdp);
+
+out_rg_gunlock:
+ gfs2_glock_dq_uninit(&al->al_rgd_gh);
+out_rindex_relse:
+ gfs2_glock_dq_uninit(&al->al_ri_gh);
+out_qs:
+ gfs2_quota_unhold(ip);
+out:
+ gfs2_alloc_put(ip);
+ return error;
+}
+
/*
* We have to (at the moment) hold the inodes main lock to cover
* the gap between unlocking the shared lock on the iopen lock and
@@ -1371,15 +1490,13 @@
}
error = gfs2_dinode_dealloc(ip);
- if (error)
- goto out_unlock;
+ goto out_unlock;
out_truncate:
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
goto out_unlock;
- /* Needs to be done before glock release & also in a transaction */
- truncate_inode_pages(&inode->i_data, 0);
+ gfs2_final_release_pages(ip);
gfs2_trans_end(sdp);
out_unlock:
@@ -1394,6 +1511,7 @@
end_writeback(inode);
ip->i_gl->gl_object = NULL;
+ gfs2_glock_add_to_lru(ip->i_gl);
gfs2_glock_put(ip->i_gl);
ip->i_gl = NULL;
if (ip->i_iopen_gh.gh_gl) {
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 748ccb5..e20eab3 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -81,7 +81,8 @@
static ssize_t uuid_show(struct gfs2_sbd *sdp, char *buf)
{
- const u8 *uuid = sdp->sd_sb.sb_uuid;
+ struct super_block *s = sdp->sd_vfs;
+ const u8 *uuid = s->s_uuid;
buf[0] = '\0';
if (!gfs2_uuid_valid(uuid))
return 0;
@@ -616,7 +617,8 @@
struct kobj_uevent_env *env)
{
struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
- const u8 *uuid = sdp->sd_sb.sb_uuid;
+ struct super_block *s = sdp->sd_vfs;
+ const u8 *uuid = s->s_uuid;
add_uevent_var(env, "LOCKTABLE=%s", sdp->sd_table_name);
add_uevent_var(env, "LOCKPROTO=%s", sdp->sd_proto_name);
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
index cedb0bb..5d07609 100644
--- a/fs/gfs2/trace_gfs2.h
+++ b/fs/gfs2/trace_gfs2.h
@@ -10,6 +10,7 @@
#include <linux/buffer_head.h>
#include <linux/dlmconstants.h>
#include <linux/gfs2_ondisk.h>
+#include <linux/writeback.h>
#include "incore.h"
#include "glock.h"
@@ -40,7 +41,9 @@
{(1UL << GLF_REPLY_PENDING), "r" }, \
{(1UL << GLF_INITIAL), "I" }, \
{(1UL << GLF_FROZEN), "F" }, \
- {(1UL << GLF_QUEUED), "q" })
+ {(1UL << GLF_QUEUED), "q" }, \
+ {(1UL << GLF_LRU), "L" }, \
+ {(1UL << GLF_OBJECT), "o" })
#ifndef NUMPTY
#define NUMPTY
@@ -94,7 +97,7 @@
__entry->new_state = glock_trace_state(new_state);
__entry->tgt_state = glock_trace_state(gl->gl_target);
__entry->dmt_state = glock_trace_state(gl->gl_demote_state);
- __entry->flags = gl->gl_flags;
+ __entry->flags = gl->gl_flags | (gl->gl_object ? (1UL<<GLF_OBJECT) : 0);
),
TP_printk("%u,%u glock %d:%lld state %s to %s tgt:%s dmt:%s flags:%s",
@@ -127,7 +130,7 @@
__entry->gltype = gl->gl_name.ln_type;
__entry->glnum = gl->gl_name.ln_number;
__entry->cur_state = glock_trace_state(gl->gl_state);
- __entry->flags = gl->gl_flags;
+ __entry->flags = gl->gl_flags | (gl->gl_object ? (1UL<<GLF_OBJECT) : 0);
),
TP_printk("%u,%u glock %d:%lld state %s => %s flags:%s",
@@ -161,7 +164,7 @@
__entry->glnum = gl->gl_name.ln_number;
__entry->cur_state = glock_trace_state(gl->gl_state);
__entry->dmt_state = glock_trace_state(gl->gl_demote_state);
- __entry->flags = gl->gl_flags;
+ __entry->flags = gl->gl_flags | (gl->gl_object ? (1UL<<GLF_OBJECT) : 0);
),
TP_printk("%u,%u glock %d:%lld demote %s to %s flags:%s",
@@ -318,6 +321,33 @@
MINOR(__entry->dev), __entry->blocks)
);
+/* Writing back the AIL */
+TRACE_EVENT(gfs2_ail_flush,
+
+ TP_PROTO(const struct gfs2_sbd *sdp, const struct writeback_control *wbc, int start),
+
+ TP_ARGS(sdp, wbc, start),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( int, start )
+ __field( int, sync_mode )
+ __field( long, nr_to_write )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = sdp->sd_vfs->s_dev;
+ __entry->start = start;
+ __entry->sync_mode = wbc->sync_mode;
+ __entry->nr_to_write = wbc->nr_to_write;
+ ),
+
+ TP_printk("%u,%u ail flush %s %s %ld", MAJOR(__entry->dev),
+ MINOR(__entry->dev), __entry->start ? "start" : "end",
+ __entry->sync_mode == WB_SYNC_ALL ? "all" : "none",
+ __entry->nr_to_write)
+);
+
/* Section 3 - bmap
*
* Objectives:
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
index 0c39dc3..56bd15c 100644
--- a/fs/hpfs/Kconfig
+++ b/fs/hpfs/Kconfig
@@ -1,7 +1,6 @@
config HPFS_FS
tristate "OS/2 HPFS file system support"
depends on BLOCK
- depends on BROKEN || !PREEMPT
help
OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
is the file system used for organizing files on OS/2 hard disk
diff --git a/fs/hpfs/alloc.c b/fs/hpfs/alloc.c
index 5503e2c..7a5eb2c 100644
--- a/fs/hpfs/alloc.c
+++ b/fs/hpfs/alloc.c
@@ -8,8 +8,6 @@
#include "hpfs_fn.h"
-static int hpfs_alloc_if_possible_nolock(struct super_block *s, secno sec);
-
/*
* Check if a sector is allocated in bitmap
* This is really slow. Turned on only if chk==2
@@ -18,9 +16,9 @@
static int chk_if_allocated(struct super_block *s, secno sec, char *msg)
{
struct quad_buffer_head qbh;
- unsigned *bmp;
+ u32 *bmp;
if (!(bmp = hpfs_map_bitmap(s, sec >> 14, &qbh, "chk"))) goto fail;
- if ((bmp[(sec & 0x3fff) >> 5] >> (sec & 0x1f)) & 1) {
+ if ((cpu_to_le32(bmp[(sec & 0x3fff) >> 5]) >> (sec & 0x1f)) & 1) {
hpfs_error(s, "sector '%s' - %08x not allocated in bitmap", msg, sec);
goto fail1;
}
@@ -28,7 +26,7 @@
if (sec >= hpfs_sb(s)->sb_dirband_start && sec < hpfs_sb(s)->sb_dirband_start + hpfs_sb(s)->sb_dirband_size) {
unsigned ssec = (sec - hpfs_sb(s)->sb_dirband_start) / 4;
if (!(bmp = hpfs_map_dnode_bitmap(s, &qbh))) goto fail;
- if ((bmp[ssec >> 5] >> (ssec & 0x1f)) & 1) {
+ if ((le32_to_cpu(bmp[ssec >> 5]) >> (ssec & 0x1f)) & 1) {
hpfs_error(s, "sector '%s' - %08x not allocated in directory bitmap", msg, sec);
goto fail1;
}
@@ -75,7 +73,6 @@
hpfs_error(s, "Bad allocation size: %d", n);
return 0;
}
- lock_super(s);
if (bs != ~0x3fff) {
if (!(bmp = hpfs_map_bitmap(s, near >> 14, &qbh, "aib"))) goto uls;
} else {
@@ -85,10 +82,6 @@
ret = bs + nr;
goto rt;
}
- /*if (!tstbits(bmp, nr + n, n + forward)) {
- ret = bs + nr + n;
- goto rt;
- }*/
q = nr + n; b = 0;
while ((a = tstbits(bmp, q, n + forward)) != 0) {
q += a;
@@ -105,14 +98,14 @@
goto rt;
}
nr >>= 5;
- /*for (i = nr + 1; i != nr; i++, i &= 0x1ff) {*/
+ /*for (i = nr + 1; i != nr; i++, i &= 0x1ff) */
i = nr;
do {
- if (!bmp[i]) goto cont;
- if (n + forward >= 0x3f && bmp[i] != -1) goto cont;
+ if (!le32_to_cpu(bmp[i])) goto cont;
+ if (n + forward >= 0x3f && le32_to_cpu(bmp[i]) != 0xffffffff) goto cont;
q = i<<5;
if (i > 0) {
- unsigned k = bmp[i-1];
+ unsigned k = le32_to_cpu(bmp[i-1]);
while (k & 0x80000000) {
q--; k <<= 1;
}
@@ -132,18 +125,17 @@
} while (i != nr);
rt:
if (ret) {
- if (hpfs_sb(s)->sb_chk && ((ret >> 14) != (bs >> 14) || (bmp[(ret & 0x3fff) >> 5] | ~(((1 << n) - 1) << (ret & 0x1f))) != 0xffffffff)) {
+ if (hpfs_sb(s)->sb_chk && ((ret >> 14) != (bs >> 14) || (le32_to_cpu(bmp[(ret & 0x3fff) >> 5]) | ~(((1 << n) - 1) << (ret & 0x1f))) != 0xffffffff)) {
hpfs_error(s, "Allocation doesn't work! Wanted %d, allocated at %08x", n, ret);
ret = 0;
goto b;
}
- bmp[(ret & 0x3fff) >> 5] &= ~(((1 << n) - 1) << (ret & 0x1f));
+ bmp[(ret & 0x3fff) >> 5] &= cpu_to_le32(~(((1 << n) - 1) << (ret & 0x1f)));
hpfs_mark_4buffers_dirty(&qbh);
}
b:
hpfs_brelse4(&qbh);
uls:
- unlock_super(s);
return ret;
}
@@ -155,7 +147,7 @@
* sectors
*/
-secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forward, int lock)
+secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forward)
{
secno sec;
int i;
@@ -167,7 +159,6 @@
forward = -forward;
f_p = 1;
}
- if (lock) hpfs_lock_creation(s);
n_bmps = (sbi->sb_fs_size + 0x4000 - 1) >> 14;
if (near && near < sbi->sb_fs_size) {
if ((sec = alloc_in_bmp(s, near, n, f_p ? forward : forward/4))) goto ret;
@@ -214,18 +205,17 @@
ret:
if (sec && f_p) {
for (i = 0; i < forward; i++) {
- if (!hpfs_alloc_if_possible_nolock(s, sec + i + 1)) {
+ if (!hpfs_alloc_if_possible(s, sec + i + 1)) {
hpfs_error(s, "Prealloc doesn't work! Wanted %d, allocated at %08x, can't allocate %d", forward, sec, i);
sec = 0;
break;
}
}
}
- if (lock) hpfs_unlock_creation(s);
return sec;
}
-static secno alloc_in_dirband(struct super_block *s, secno near, int lock)
+static secno alloc_in_dirband(struct super_block *s, secno near)
{
unsigned nr = near;
secno sec;
@@ -236,49 +226,35 @@
nr = sbi->sb_dirband_start + sbi->sb_dirband_size - 4;
nr -= sbi->sb_dirband_start;
nr >>= 2;
- if (lock) hpfs_lock_creation(s);
sec = alloc_in_bmp(s, (~0x3fff) | nr, 1, 0);
- if (lock) hpfs_unlock_creation(s);
if (!sec) return 0;
return ((sec & 0x3fff) << 2) + sbi->sb_dirband_start;
}
/* Alloc sector if it's free */
-static int hpfs_alloc_if_possible_nolock(struct super_block *s, secno sec)
+int hpfs_alloc_if_possible(struct super_block *s, secno sec)
{
struct quad_buffer_head qbh;
- unsigned *bmp;
- lock_super(s);
+ u32 *bmp;
if (!(bmp = hpfs_map_bitmap(s, sec >> 14, &qbh, "aip"))) goto end;
- if (bmp[(sec & 0x3fff) >> 5] & (1 << (sec & 0x1f))) {
- bmp[(sec & 0x3fff) >> 5] &= ~(1 << (sec & 0x1f));
+ if (le32_to_cpu(bmp[(sec & 0x3fff) >> 5]) & (1 << (sec & 0x1f))) {
+ bmp[(sec & 0x3fff) >> 5] &= cpu_to_le32(~(1 << (sec & 0x1f)));
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
- unlock_super(s);
return 1;
}
hpfs_brelse4(&qbh);
end:
- unlock_super(s);
return 0;
}
-int hpfs_alloc_if_possible(struct super_block *s, secno sec)
-{
- int r;
- hpfs_lock_creation(s);
- r = hpfs_alloc_if_possible_nolock(s, sec);
- hpfs_unlock_creation(s);
- return r;
-}
-
/* Free sectors in bitmaps */
void hpfs_free_sectors(struct super_block *s, secno sec, unsigned n)
{
struct quad_buffer_head qbh;
- unsigned *bmp;
+ u32 *bmp;
struct hpfs_sb_info *sbi = hpfs_sb(s);
/*printk("2 - ");*/
if (!n) return;
@@ -286,26 +262,22 @@
hpfs_error(s, "Trying to free reserved sector %08x", sec);
return;
}
- lock_super(s);
sbi->sb_max_fwd_alloc += n > 0xffff ? 0xffff : n;
if (sbi->sb_max_fwd_alloc > 0xffffff) sbi->sb_max_fwd_alloc = 0xffffff;
new_map:
if (!(bmp = hpfs_map_bitmap(s, sec >> 14, &qbh, "free"))) {
- unlock_super(s);
return;
}
new_tst:
- if ((bmp[(sec & 0x3fff) >> 5] >> (sec & 0x1f) & 1)) {
+ if ((le32_to_cpu(bmp[(sec & 0x3fff) >> 5]) >> (sec & 0x1f) & 1)) {
hpfs_error(s, "sector %08x not allocated", sec);
hpfs_brelse4(&qbh);
- unlock_super(s);
return;
}
- bmp[(sec & 0x3fff) >> 5] |= 1 << (sec & 0x1f);
+ bmp[(sec & 0x3fff) >> 5] |= cpu_to_le32(1 << (sec & 0x1f));
if (!--n) {
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
- unlock_super(s);
return;
}
if (!(++sec & 0x3fff)) {
@@ -327,13 +299,13 @@
int n_bmps = (hpfs_sb(s)->sb_fs_size + 0x4000 - 1) >> 14;
int b = hpfs_sb(s)->sb_c_bitmap & 0x0fffffff;
int i, j;
- unsigned *bmp;
+ u32 *bmp;
struct quad_buffer_head qbh;
if ((bmp = hpfs_map_dnode_bitmap(s, &qbh))) {
for (j = 0; j < 512; j++) {
unsigned k;
- if (!bmp[j]) continue;
- for (k = bmp[j]; k; k >>= 1) if (k & 1) if (!--n) {
+ if (!le32_to_cpu(bmp[j])) continue;
+ for (k = le32_to_cpu(bmp[j]); k; k >>= 1) if (k & 1) if (!--n) {
hpfs_brelse4(&qbh);
return 0;
}
@@ -352,10 +324,10 @@
chk_bmp:
if (bmp) {
for (j = 0; j < 512; j++) {
- unsigned k;
- if (!bmp[j]) continue;
+ u32 k;
+ if (!le32_to_cpu(bmp[j])) continue;
for (k = 0xf; k; k <<= 4)
- if ((bmp[j] & k) == k) {
+ if ((le32_to_cpu(bmp[j]) & k) == k) {
if (!--n) {
hpfs_brelse4(&qbh);
return 0;
@@ -379,44 +351,40 @@
hpfs_free_sectors(s, dno, 4);
} else {
struct quad_buffer_head qbh;
- unsigned *bmp;
+ u32 *bmp;
unsigned ssec = (dno - hpfs_sb(s)->sb_dirband_start) / 4;
- lock_super(s);
if (!(bmp = hpfs_map_dnode_bitmap(s, &qbh))) {
- unlock_super(s);
return;
}
- bmp[ssec >> 5] |= 1 << (ssec & 0x1f);
+ bmp[ssec >> 5] |= cpu_to_le32(1 << (ssec & 0x1f));
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
- unlock_super(s);
}
}
struct dnode *hpfs_alloc_dnode(struct super_block *s, secno near,
- dnode_secno *dno, struct quad_buffer_head *qbh,
- int lock)
+ dnode_secno *dno, struct quad_buffer_head *qbh)
{
struct dnode *d;
if (hpfs_count_one_bitmap(s, hpfs_sb(s)->sb_dmap) > FREE_DNODES_ADD) {
- if (!(*dno = alloc_in_dirband(s, near, lock)))
- if (!(*dno = hpfs_alloc_sector(s, near, 4, 0, lock))) return NULL;
+ if (!(*dno = alloc_in_dirband(s, near)))
+ if (!(*dno = hpfs_alloc_sector(s, near, 4, 0))) return NULL;
} else {
- if (!(*dno = hpfs_alloc_sector(s, near, 4, 0, lock)))
- if (!(*dno = alloc_in_dirband(s, near, lock))) return NULL;
+ if (!(*dno = hpfs_alloc_sector(s, near, 4, 0)))
+ if (!(*dno = alloc_in_dirband(s, near))) return NULL;
}
if (!(d = hpfs_get_4sectors(s, *dno, qbh))) {
hpfs_free_dnode(s, *dno);
return NULL;
}
memset(d, 0, 2048);
- d->magic = DNODE_MAGIC;
- d->first_free = 52;
+ d->magic = cpu_to_le32(DNODE_MAGIC);
+ d->first_free = cpu_to_le32(52);
d->dirent[0] = 32;
d->dirent[2] = 8;
d->dirent[30] = 1;
d->dirent[31] = 255;
- d->self = *dno;
+ d->self = cpu_to_le32(*dno);
return d;
}
@@ -424,16 +392,16 @@
struct buffer_head **bh)
{
struct fnode *f;
- if (!(*fno = hpfs_alloc_sector(s, near, 1, FNODE_ALLOC_FWD, 1))) return NULL;
+ if (!(*fno = hpfs_alloc_sector(s, near, 1, FNODE_ALLOC_FWD))) return NULL;
if (!(f = hpfs_get_sector(s, *fno, bh))) {
hpfs_free_sectors(s, *fno, 1);
return NULL;
}
memset(f, 0, 512);
- f->magic = FNODE_MAGIC;
- f->ea_offs = 0xc4;
+ f->magic = cpu_to_le32(FNODE_MAGIC);
+ f->ea_offs = cpu_to_le16(0xc4);
f->btree.n_free_nodes = 8;
- f->btree.first_free = 8;
+ f->btree.first_free = cpu_to_le16(8);
return f;
}
@@ -441,16 +409,16 @@
struct buffer_head **bh)
{
struct anode *a;
- if (!(*ano = hpfs_alloc_sector(s, near, 1, ANODE_ALLOC_FWD, 1))) return NULL;
+ if (!(*ano = hpfs_alloc_sector(s, near, 1, ANODE_ALLOC_FWD))) return NULL;
if (!(a = hpfs_get_sector(s, *ano, bh))) {
hpfs_free_sectors(s, *ano, 1);
return NULL;
}
memset(a, 0, 512);
- a->magic = ANODE_MAGIC;
- a->self = *ano;
+ a->magic = cpu_to_le32(ANODE_MAGIC);
+ a->self = cpu_to_le32(*ano);
a->btree.n_free_nodes = 40;
a->btree.n_used_nodes = 0;
- a->btree.first_free = 8;
+ a->btree.first_free = cpu_to_le16(8);
return a;
}
diff --git a/fs/hpfs/anode.c b/fs/hpfs/anode.c
index 6a2f04b..08b503e8 100644
--- a/fs/hpfs/anode.c
+++ b/fs/hpfs/anode.c
@@ -22,8 +22,8 @@
if (hpfs_sb(s)->sb_chk) if (hpfs_stop_cycles(s, a, &c1, &c2, "hpfs_bplus_lookup")) return -1;
if (btree->internal) {
for (i = 0; i < btree->n_used_nodes; i++)
- if (btree->u.internal[i].file_secno > sec) {
- a = btree->u.internal[i].down;
+ if (le32_to_cpu(btree->u.internal[i].file_secno) > sec) {
+ a = le32_to_cpu(btree->u.internal[i].down);
brelse(bh);
if (!(anode = hpfs_map_anode(s, a, &bh))) return -1;
btree = &anode->btree;
@@ -34,18 +34,18 @@
return -1;
}
for (i = 0; i < btree->n_used_nodes; i++)
- if (btree->u.external[i].file_secno <= sec &&
- btree->u.external[i].file_secno + btree->u.external[i].length > sec) {
- a = btree->u.external[i].disk_secno + sec - btree->u.external[i].file_secno;
+ if (le32_to_cpu(btree->u.external[i].file_secno) <= sec &&
+ le32_to_cpu(btree->u.external[i].file_secno) + le32_to_cpu(btree->u.external[i].length) > sec) {
+ a = le32_to_cpu(btree->u.external[i].disk_secno) + sec - le32_to_cpu(btree->u.external[i].file_secno);
if (hpfs_sb(s)->sb_chk) if (hpfs_chk_sectors(s, a, 1, "data")) {
brelse(bh);
return -1;
}
if (inode) {
struct hpfs_inode_info *hpfs_inode = hpfs_i(inode);
- hpfs_inode->i_file_sec = btree->u.external[i].file_secno;
- hpfs_inode->i_disk_sec = btree->u.external[i].disk_secno;
- hpfs_inode->i_n_secs = btree->u.external[i].length;
+ hpfs_inode->i_file_sec = le32_to_cpu(btree->u.external[i].file_secno);
+ hpfs_inode->i_disk_sec = le32_to_cpu(btree->u.external[i].disk_secno);
+ hpfs_inode->i_n_secs = le32_to_cpu(btree->u.external[i].length);
}
brelse(bh);
return a;
@@ -83,8 +83,8 @@
return -1;
}
if (btree->internal) {
- a = btree->u.internal[n].down;
- btree->u.internal[n].file_secno = -1;
+ a = le32_to_cpu(btree->u.internal[n].down);
+ btree->u.internal[n].file_secno = cpu_to_le32(-1);
mark_buffer_dirty(bh);
brelse(bh);
if (hpfs_sb(s)->sb_chk)
@@ -94,15 +94,15 @@
goto go_down;
}
if (n >= 0) {
- if (btree->u.external[n].file_secno + btree->u.external[n].length != fsecno) {
+ if (le32_to_cpu(btree->u.external[n].file_secno) + le32_to_cpu(btree->u.external[n].length) != fsecno) {
hpfs_error(s, "allocated size %08x, trying to add sector %08x, %cnode %08x",
- btree->u.external[n].file_secno + btree->u.external[n].length, fsecno,
+ le32_to_cpu(btree->u.external[n].file_secno) + le32_to_cpu(btree->u.external[n].length), fsecno,
fnod?'f':'a', node);
brelse(bh);
return -1;
}
- if (hpfs_alloc_if_possible(s, se = btree->u.external[n].disk_secno + btree->u.external[n].length)) {
- btree->u.external[n].length++;
+ if (hpfs_alloc_if_possible(s, se = le32_to_cpu(btree->u.external[n].disk_secno) + le32_to_cpu(btree->u.external[n].length))) {
+ btree->u.external[n].length = cpu_to_le32(le32_to_cpu(btree->u.external[n].length) + 1);
mark_buffer_dirty(bh);
brelse(bh);
return se;
@@ -115,20 +115,20 @@
}
se = !fnod ? node : (node + 16384) & ~16383;
}
- if (!(se = hpfs_alloc_sector(s, se, 1, fsecno*ALLOC_M>ALLOC_FWD_MAX ? ALLOC_FWD_MAX : fsecno*ALLOC_M<ALLOC_FWD_MIN ? ALLOC_FWD_MIN : fsecno*ALLOC_M, 1))) {
+ if (!(se = hpfs_alloc_sector(s, se, 1, fsecno*ALLOC_M>ALLOC_FWD_MAX ? ALLOC_FWD_MAX : fsecno*ALLOC_M<ALLOC_FWD_MIN ? ALLOC_FWD_MIN : fsecno*ALLOC_M))) {
brelse(bh);
return -1;
}
- fs = n < 0 ? 0 : btree->u.external[n].file_secno + btree->u.external[n].length;
+ fs = n < 0 ? 0 : le32_to_cpu(btree->u.external[n].file_secno) + le32_to_cpu(btree->u.external[n].length);
if (!btree->n_free_nodes) {
- up = a != node ? anode->up : -1;
+ up = a != node ? le32_to_cpu(anode->up) : -1;
if (!(anode = hpfs_alloc_anode(s, a, &na, &bh1))) {
brelse(bh);
hpfs_free_sectors(s, se, 1);
return -1;
}
if (a == node && fnod) {
- anode->up = node;
+ anode->up = cpu_to_le32(node);
anode->btree.fnode_parent = 1;
anode->btree.n_used_nodes = btree->n_used_nodes;
anode->btree.first_free = btree->first_free;
@@ -137,9 +137,9 @@
btree->internal = 1;
btree->n_free_nodes = 11;
btree->n_used_nodes = 1;
- btree->first_free = (char *)&(btree->u.internal[1]) - (char *)btree;
- btree->u.internal[0].file_secno = -1;
- btree->u.internal[0].down = na;
+ btree->first_free = cpu_to_le16((char *)&(btree->u.internal[1]) - (char *)btree);
+ btree->u.internal[0].file_secno = cpu_to_le32(-1);
+ btree->u.internal[0].down = cpu_to_le32(na);
mark_buffer_dirty(bh);
} else if (!(ranode = hpfs_alloc_anode(s, /*a*/0, &ra, &bh2))) {
brelse(bh);
@@ -153,15 +153,15 @@
btree = &anode->btree;
}
btree->n_free_nodes--; n = btree->n_used_nodes++;
- btree->first_free += 12;
- btree->u.external[n].disk_secno = se;
- btree->u.external[n].file_secno = fs;
- btree->u.external[n].length = 1;
+ btree->first_free = cpu_to_le16(le16_to_cpu(btree->first_free) + 12);
+ btree->u.external[n].disk_secno = cpu_to_le32(se);
+ btree->u.external[n].file_secno = cpu_to_le32(fs);
+ btree->u.external[n].length = cpu_to_le32(1);
mark_buffer_dirty(bh);
brelse(bh);
if ((a == node && fnod) || na == -1) return se;
c2 = 0;
- while (up != -1) {
+ while (up != (anode_secno)-1) {
struct anode *new_anode;
if (hpfs_sb(s)->sb_chk)
if (hpfs_stop_cycles(s, up, &c1, &c2, "hpfs_add_sector_to_btree #2")) return -1;
@@ -174,47 +174,47 @@
}
if (btree->n_free_nodes) {
btree->n_free_nodes--; n = btree->n_used_nodes++;
- btree->first_free += 8;
- btree->u.internal[n].file_secno = -1;
- btree->u.internal[n].down = na;
- btree->u.internal[n-1].file_secno = fs;
+ btree->first_free = cpu_to_le16(le16_to_cpu(btree->first_free) + 8);
+ btree->u.internal[n].file_secno = cpu_to_le32(-1);
+ btree->u.internal[n].down = cpu_to_le32(na);
+ btree->u.internal[n-1].file_secno = cpu_to_le32(fs);
mark_buffer_dirty(bh);
brelse(bh);
brelse(bh2);
hpfs_free_sectors(s, ra, 1);
if ((anode = hpfs_map_anode(s, na, &bh))) {
- anode->up = up;
+ anode->up = cpu_to_le32(up);
anode->btree.fnode_parent = up == node && fnod;
mark_buffer_dirty(bh);
brelse(bh);
}
return se;
}
- up = up != node ? anode->up : -1;
- btree->u.internal[btree->n_used_nodes - 1].file_secno = /*fs*/-1;
+ up = up != node ? le32_to_cpu(anode->up) : -1;
+ btree->u.internal[btree->n_used_nodes - 1].file_secno = cpu_to_le32(/*fs*/-1);
mark_buffer_dirty(bh);
brelse(bh);
a = na;
if ((new_anode = hpfs_alloc_anode(s, a, &na, &bh))) {
anode = new_anode;
- /*anode->up = up != -1 ? up : ra;*/
+ /*anode->up = cpu_to_le32(up != -1 ? up : ra);*/
anode->btree.internal = 1;
anode->btree.n_used_nodes = 1;
anode->btree.n_free_nodes = 59;
- anode->btree.first_free = 16;
- anode->btree.u.internal[0].down = a;
- anode->btree.u.internal[0].file_secno = -1;
+ anode->btree.first_free = cpu_to_le16(16);
+ anode->btree.u.internal[0].down = cpu_to_le32(a);
+ anode->btree.u.internal[0].file_secno = cpu_to_le32(-1);
mark_buffer_dirty(bh);
brelse(bh);
if ((anode = hpfs_map_anode(s, a, &bh))) {
- anode->up = na;
+ anode->up = cpu_to_le32(na);
mark_buffer_dirty(bh);
brelse(bh);
}
} else na = a;
}
if ((anode = hpfs_map_anode(s, na, &bh))) {
- anode->up = node;
+ anode->up = cpu_to_le32(node);
if (fnod) anode->btree.fnode_parent = 1;
mark_buffer_dirty(bh);
brelse(bh);
@@ -232,14 +232,14 @@
}
btree = &fnode->btree;
}
- ranode->up = node;
- memcpy(&ranode->btree, btree, btree->first_free);
+ ranode->up = cpu_to_le32(node);
+ memcpy(&ranode->btree, btree, le16_to_cpu(btree->first_free));
if (fnod) ranode->btree.fnode_parent = 1;
ranode->btree.n_free_nodes = (ranode->btree.internal ? 60 : 40) - ranode->btree.n_used_nodes;
if (ranode->btree.internal) for (n = 0; n < ranode->btree.n_used_nodes; n++) {
struct anode *unode;
- if ((unode = hpfs_map_anode(s, ranode->u.internal[n].down, &bh1))) {
- unode->up = ra;
+ if ((unode = hpfs_map_anode(s, le32_to_cpu(ranode->u.internal[n].down), &bh1))) {
+ unode->up = cpu_to_le32(ra);
unode->btree.fnode_parent = 0;
mark_buffer_dirty(bh1);
brelse(bh1);
@@ -248,11 +248,11 @@
btree->internal = 1;
btree->n_free_nodes = fnod ? 10 : 58;
btree->n_used_nodes = 2;
- btree->first_free = (char *)&btree->u.internal[2] - (char *)btree;
- btree->u.internal[0].file_secno = fs;
- btree->u.internal[0].down = ra;
- btree->u.internal[1].file_secno = -1;
- btree->u.internal[1].down = na;
+ btree->first_free = cpu_to_le16((char *)&btree->u.internal[2] - (char *)btree);
+ btree->u.internal[0].file_secno = cpu_to_le32(fs);
+ btree->u.internal[0].down = cpu_to_le32(ra);
+ btree->u.internal[1].file_secno = cpu_to_le32(-1);
+ btree->u.internal[1].down = cpu_to_le32(na);
mark_buffer_dirty(bh);
brelse(bh);
mark_buffer_dirty(bh2);
@@ -279,7 +279,7 @@
go_down:
d2 = 0;
while (btree1->internal) {
- ano = btree1->u.internal[pos].down;
+ ano = le32_to_cpu(btree1->u.internal[pos].down);
if (level) brelse(bh);
if (hpfs_sb(s)->sb_chk)
if (hpfs_stop_cycles(s, ano, &d1, &d2, "hpfs_remove_btree #1"))
@@ -290,7 +290,7 @@
pos = 0;
}
for (i = 0; i < btree1->n_used_nodes; i++)
- hpfs_free_sectors(s, btree1->u.external[i].disk_secno, btree1->u.external[i].length);
+ hpfs_free_sectors(s, le32_to_cpu(btree1->u.external[i].disk_secno), le32_to_cpu(btree1->u.external[i].length));
go_up:
if (!level) return;
brelse(bh);
@@ -298,13 +298,13 @@
if (hpfs_stop_cycles(s, ano, &c1, &c2, "hpfs_remove_btree #2")) return;
hpfs_free_sectors(s, ano, 1);
oano = ano;
- ano = anode->up;
+ ano = le32_to_cpu(anode->up);
if (--level) {
if (!(anode = hpfs_map_anode(s, ano, &bh))) return;
btree1 = &anode->btree;
} else btree1 = btree;
for (i = 0; i < btree1->n_used_nodes; i++) {
- if (btree1->u.internal[i].down == oano) {
+ if (le32_to_cpu(btree1->u.internal[i].down) == oano) {
if ((pos = i + 1) < btree1->n_used_nodes)
goto go_down;
else
@@ -411,7 +411,7 @@
if (fno) {
btree->n_free_nodes = 8;
btree->n_used_nodes = 0;
- btree->first_free = 8;
+ btree->first_free = cpu_to_le16(8);
btree->internal = 0;
mark_buffer_dirty(bh);
} else hpfs_free_sectors(s, f, 1);
@@ -421,22 +421,22 @@
while (btree->internal) {
nodes = btree->n_used_nodes + btree->n_free_nodes;
for (i = 0; i < btree->n_used_nodes; i++)
- if (btree->u.internal[i].file_secno >= secs) goto f;
+ if (le32_to_cpu(btree->u.internal[i].file_secno) >= secs) goto f;
brelse(bh);
hpfs_error(s, "internal btree %08x doesn't end with -1", node);
return;
f:
for (j = i + 1; j < btree->n_used_nodes; j++)
- hpfs_ea_remove(s, btree->u.internal[j].down, 1, 0);
+ hpfs_ea_remove(s, le32_to_cpu(btree->u.internal[j].down), 1, 0);
btree->n_used_nodes = i + 1;
btree->n_free_nodes = nodes - btree->n_used_nodes;
- btree->first_free = 8 + 8 * btree->n_used_nodes;
+ btree->first_free = cpu_to_le16(8 + 8 * btree->n_used_nodes);
mark_buffer_dirty(bh);
- if (btree->u.internal[i].file_secno == secs) {
+ if (btree->u.internal[i].file_secno == cpu_to_le32(secs)) {
brelse(bh);
return;
}
- node = btree->u.internal[i].down;
+ node = le32_to_cpu(btree->u.internal[i].down);
brelse(bh);
if (hpfs_sb(s)->sb_chk)
if (hpfs_stop_cycles(s, node, &c1, &c2, "hpfs_truncate_btree"))
@@ -446,25 +446,25 @@
}
nodes = btree->n_used_nodes + btree->n_free_nodes;
for (i = 0; i < btree->n_used_nodes; i++)
- if (btree->u.external[i].file_secno + btree->u.external[i].length >= secs) goto ff;
+ if (le32_to_cpu(btree->u.external[i].file_secno) + le32_to_cpu(btree->u.external[i].length) >= secs) goto ff;
brelse(bh);
return;
ff:
- if (secs <= btree->u.external[i].file_secno) {
+ if (secs <= le32_to_cpu(btree->u.external[i].file_secno)) {
hpfs_error(s, "there is an allocation error in file %08x, sector %08x", f, secs);
if (i) i--;
}
- else if (btree->u.external[i].file_secno + btree->u.external[i].length > secs) {
- hpfs_free_sectors(s, btree->u.external[i].disk_secno + secs -
- btree->u.external[i].file_secno, btree->u.external[i].length
- - secs + btree->u.external[i].file_secno); /* I hope gcc optimizes this :-) */
- btree->u.external[i].length = secs - btree->u.external[i].file_secno;
+ else if (le32_to_cpu(btree->u.external[i].file_secno) + le32_to_cpu(btree->u.external[i].length) > secs) {
+ hpfs_free_sectors(s, le32_to_cpu(btree->u.external[i].disk_secno) + secs -
+ le32_to_cpu(btree->u.external[i].file_secno), le32_to_cpu(btree->u.external[i].length)
+ - secs + le32_to_cpu(btree->u.external[i].file_secno)); /* I hope gcc optimizes this :-) */
+ btree->u.external[i].length = cpu_to_le32(secs - le32_to_cpu(btree->u.external[i].file_secno));
}
for (j = i + 1; j < btree->n_used_nodes; j++)
- hpfs_free_sectors(s, btree->u.external[j].disk_secno, btree->u.external[j].length);
+ hpfs_free_sectors(s, le32_to_cpu(btree->u.external[j].disk_secno), le32_to_cpu(btree->u.external[j].length));
btree->n_used_nodes = i + 1;
btree->n_free_nodes = nodes - btree->n_used_nodes;
- btree->first_free = 8 + 12 * btree->n_used_nodes;
+ btree->first_free = cpu_to_le16(8 + 12 * btree->n_used_nodes);
mark_buffer_dirty(bh);
brelse(bh);
}
@@ -480,12 +480,12 @@
struct extended_attribute *ea_end;
if (!(fnode = hpfs_map_fnode(s, fno, &bh))) return;
if (!fnode->dirflag) hpfs_remove_btree(s, &fnode->btree);
- else hpfs_remove_dtree(s, fnode->u.external[0].disk_secno);
+ else hpfs_remove_dtree(s, le32_to_cpu(fnode->u.external[0].disk_secno));
ea_end = fnode_end_ea(fnode);
for (ea = fnode_ea(fnode); ea < ea_end; ea = next_ea(ea))
if (ea->indirect)
hpfs_ea_remove(s, ea_sec(ea), ea->anode, ea_len(ea));
- hpfs_ea_ext_remove(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l);
+ hpfs_ea_ext_remove(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l));
brelse(bh);
hpfs_free_sectors(s, fno, 1);
}
diff --git a/fs/hpfs/buffer.c b/fs/hpfs/buffer.c
index 793cb9d..9ecde27 100644
--- a/fs/hpfs/buffer.c
+++ b/fs/hpfs/buffer.c
@@ -9,22 +9,6 @@
#include <linux/slab.h>
#include "hpfs_fn.h"
-void hpfs_lock_creation(struct super_block *s)
-{
-#ifdef DEBUG_LOCKS
- printk("lock creation\n");
-#endif
- mutex_lock(&hpfs_sb(s)->hpfs_creation_de);
-}
-
-void hpfs_unlock_creation(struct super_block *s)
-{
-#ifdef DEBUG_LOCKS
- printk("unlock creation\n");
-#endif
- mutex_unlock(&hpfs_sb(s)->hpfs_creation_de);
-}
-
/* Map a sector into a buffer and return pointers to it and to the buffer. */
void *hpfs_map_sector(struct super_block *s, unsigned secno, struct buffer_head **bhp,
@@ -32,6 +16,8 @@
{
struct buffer_head *bh;
+ hpfs_lock_assert(s);
+
cond_resched();
*bhp = bh = sb_bread(s, secno);
@@ -50,6 +36,8 @@
struct buffer_head *bh;
/*return hpfs_map_sector(s, secno, bhp, 0);*/
+ hpfs_lock_assert(s);
+
cond_resched();
if ((*bhp = bh = sb_getblk(s, secno)) != NULL) {
@@ -70,6 +58,8 @@
struct buffer_head *bh;
char *data;
+ hpfs_lock_assert(s);
+
cond_resched();
if (secno & 3) {
@@ -125,6 +115,8 @@
{
cond_resched();
+ hpfs_lock_assert(s);
+
if (secno & 3) {
printk("HPFS: hpfs_get_4sectors: unaligned read\n");
return NULL;
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index b3d7c0d..f46ae02 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -88,9 +88,9 @@
hpfs_error(inode->i_sb, "not a directory, fnode %08lx",
(unsigned long)inode->i_ino);
}
- if (hpfs_inode->i_dno != fno->u.external[0].disk_secno) {
+ if (hpfs_inode->i_dno != le32_to_cpu(fno->u.external[0].disk_secno)) {
e = 1;
- hpfs_error(inode->i_sb, "corrupted inode: i_dno == %08x, fnode -> dnode == %08x", hpfs_inode->i_dno, fno->u.external[0].disk_secno);
+ hpfs_error(inode->i_sb, "corrupted inode: i_dno == %08x, fnode -> dnode == %08x", hpfs_inode->i_dno, le32_to_cpu(fno->u.external[0].disk_secno));
}
brelse(bh);
if (e) {
@@ -156,7 +156,7 @@
goto again;
}
tempname = hpfs_translate_name(inode->i_sb, de->name, de->namelen, lc, de->not_8x3);
- if (filldir(dirent, tempname, de->namelen, old_pos, de->fnode, DT_UNKNOWN) < 0) {
+ if (filldir(dirent, tempname, de->namelen, old_pos, le32_to_cpu(de->fnode), DT_UNKNOWN) < 0) {
filp->f_pos = old_pos;
if (tempname != de->name) kfree(tempname);
hpfs_brelse4(&qbh);
@@ -221,7 +221,7 @@
* Get inode number, what we're after.
*/
- ino = de->fnode;
+ ino = le32_to_cpu(de->fnode);
/*
* Go find or make an inode.
@@ -236,7 +236,7 @@
hpfs_init_inode(result);
if (de->directory)
hpfs_read_inode(result);
- else if (de->ea_size && hpfs_sb(dir->i_sb)->sb_eas)
+ else if (le32_to_cpu(de->ea_size) && hpfs_sb(dir->i_sb)->sb_eas)
hpfs_read_inode(result);
else {
result->i_mode |= S_IFREG;
@@ -250,8 +250,6 @@
hpfs_result = hpfs_i(result);
if (!de->directory) hpfs_result->i_parent_dir = dir->i_ino;
- hpfs_decide_conv(result, name, len);
-
if (de->has_acl || de->has_xtd_perm) if (!(dir->i_sb->s_flags & MS_RDONLY)) {
hpfs_error(result->i_sb, "ACLs or XPERM found. This is probably HPFS386. This driver doesn't support it now. Send me some info on these structures");
goto bail1;
@@ -263,19 +261,19 @@
*/
if (!result->i_ctime.tv_sec) {
- if (!(result->i_ctime.tv_sec = local_to_gmt(dir->i_sb, de->creation_date)))
+ if (!(result->i_ctime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(de->creation_date))))
result->i_ctime.tv_sec = 1;
result->i_ctime.tv_nsec = 0;
- result->i_mtime.tv_sec = local_to_gmt(dir->i_sb, de->write_date);
+ result->i_mtime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(de->write_date));
result->i_mtime.tv_nsec = 0;
- result->i_atime.tv_sec = local_to_gmt(dir->i_sb, de->read_date);
+ result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(de->read_date));
result->i_atime.tv_nsec = 0;
- hpfs_result->i_ea_size = de->ea_size;
+ hpfs_result->i_ea_size = le32_to_cpu(de->ea_size);
if (!hpfs_result->i_ea_mode && de->read_only)
result->i_mode &= ~0222;
if (!de->directory) {
if (result->i_size == -1) {
- result->i_size = de->file_size;
+ result->i_size = le32_to_cpu(de->file_size);
result->i_data.a_ops = &hpfs_aops;
hpfs_i(result)->mmu_private = result->i_size;
/*
diff --git a/fs/hpfs/dnode.c b/fs/hpfs/dnode.c
index 9b2ffad..1e0e2ac 100644
--- a/fs/hpfs/dnode.c
+++ b/fs/hpfs/dnode.c
@@ -14,11 +14,11 @@
struct hpfs_dirent *de_end = dnode_end_de(d);
int i = 1;
for (de = dnode_first_de(d); de < de_end; de = de_next_de(de)) {
- if (de == fde) return ((loff_t) d->self << 4) | (loff_t)i;
+ if (de == fde) return ((loff_t) le32_to_cpu(d->self) << 4) | (loff_t)i;
i++;
}
printk("HPFS: get_pos: not_found\n");
- return ((loff_t)d->self << 4) | (loff_t)1;
+ return ((loff_t)le32_to_cpu(d->self) << 4) | (loff_t)1;
}
void hpfs_add_pos(struct inode *inode, loff_t *pos)
@@ -130,29 +130,30 @@
{
struct hpfs_dirent *de;
if (!(de = dnode_last_de(d))) {
- hpfs_error(s, "set_last_pointer: empty dnode %08x", d->self);
+ hpfs_error(s, "set_last_pointer: empty dnode %08x", le32_to_cpu(d->self));
return;
}
if (hpfs_sb(s)->sb_chk) {
if (de->down) {
hpfs_error(s, "set_last_pointer: dnode %08x has already last pointer %08x",
- d->self, de_down_pointer(de));
+ le32_to_cpu(d->self), de_down_pointer(de));
return;
}
- if (de->length != 32) {
- hpfs_error(s, "set_last_pointer: bad last dirent in dnode %08x", d->self);
+ if (le16_to_cpu(de->length) != 32) {
+ hpfs_error(s, "set_last_pointer: bad last dirent in dnode %08x", le32_to_cpu(d->self));
return;
}
}
if (ptr) {
- if ((d->first_free += 4) > 2048) {
- hpfs_error(s,"set_last_pointer: too long dnode %08x", d->self);
- d->first_free -= 4;
+ d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) + 4);
+ if (le32_to_cpu(d->first_free) > 2048) {
+ hpfs_error(s, "set_last_pointer: too long dnode %08x", le32_to_cpu(d->self));
+ d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) - 4);
return;
}
- de->length = 36;
+ de->length = cpu_to_le16(36);
de->down = 1;
- *(dnode_secno *)((char *)de + 32) = ptr;
+ *(dnode_secno *)((char *)de + 32) = cpu_to_le32(ptr);
}
}
@@ -168,7 +169,7 @@
for (de = dnode_first_de(d); de < de_end; de = de_next_de(de)) {
int c = hpfs_compare_names(s, name, namelen, de->name, de->namelen, de->last);
if (!c) {
- hpfs_error(s, "name (%c,%d) already exists in dnode %08x", *name, namelen, d->self);
+ hpfs_error(s, "name (%c,%d) already exists in dnode %08x", *name, namelen, le32_to_cpu(d->self));
return NULL;
}
if (c < 0) break;
@@ -176,15 +177,14 @@
memmove((char *)de + d_size, de, (char *)de_end - (char *)de);
memset(de, 0, d_size);
if (down_ptr) {
- *(int *)((char *)de + d_size - 4) = down_ptr;
+ *(dnode_secno *)((char *)de + d_size - 4) = cpu_to_le32(down_ptr);
de->down = 1;
}
- de->length = d_size;
- if (down_ptr) de->down = 1;
+ de->length = cpu_to_le16(d_size);
de->not_8x3 = hpfs_is_name_long(name, namelen);
de->namelen = namelen;
memcpy(de->name, name, namelen);
- d->first_free += d_size;
+ d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) + d_size);
return de;
}
@@ -194,25 +194,25 @@
struct hpfs_dirent *de)
{
if (de->last) {
- hpfs_error(s, "attempt to delete last dirent in dnode %08x", d->self);
+ hpfs_error(s, "attempt to delete last dirent in dnode %08x", le32_to_cpu(d->self));
return;
}
- d->first_free -= de->length;
- memmove(de, de_next_de(de), d->first_free + (char *)d - (char *)de);
+ d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) - le16_to_cpu(de->length));
+ memmove(de, de_next_de(de), le32_to_cpu(d->first_free) + (char *)d - (char *)de);
}
static void fix_up_ptrs(struct super_block *s, struct dnode *d)
{
struct hpfs_dirent *de;
struct hpfs_dirent *de_end = dnode_end_de(d);
- dnode_secno dno = d->self;
+ dnode_secno dno = le32_to_cpu(d->self);
for (de = dnode_first_de(d); de < de_end; de = de_next_de(de))
if (de->down) {
struct quad_buffer_head qbh;
struct dnode *dd;
if ((dd = hpfs_map_dnode(s, de_down_pointer(de), &qbh))) {
- if (dd->up != dno || dd->root_dnode) {
- dd->up = dno;
+ if (le32_to_cpu(dd->up) != dno || dd->root_dnode) {
+ dd->up = cpu_to_le32(dno);
dd->root_dnode = 0;
hpfs_mark_4buffers_dirty(&qbh);
}
@@ -262,7 +262,7 @@
kfree(nname);
return 1;
}
- if (d->first_free + de_size(namelen, down_ptr) <= 2048) {
+ if (le32_to_cpu(d->first_free) + de_size(namelen, down_ptr) <= 2048) {
loff_t t;
copy_de(de=hpfs_add_de(i->i_sb, d, name, namelen, down_ptr), new_de);
t = get_pos(d, de);
@@ -286,11 +286,11 @@
kfree(nname);
return 1;
}
- memcpy(nd, d, d->first_free);
+ memcpy(nd, d, le32_to_cpu(d->first_free));
copy_de(de = hpfs_add_de(i->i_sb, nd, name, namelen, down_ptr), new_de);
for_all_poss(i, hpfs_pos_ins, get_pos(nd, de), 1);
h = ((char *)dnode_last_de(nd) - (char *)nd) / 2 + 10;
- if (!(ad = hpfs_alloc_dnode(i->i_sb, d->up, &adno, &qbh1, 0))) {
+ if (!(ad = hpfs_alloc_dnode(i->i_sb, le32_to_cpu(d->up), &adno, &qbh1))) {
hpfs_error(i->i_sb, "unable to alloc dnode - dnode tree will be corrupted");
hpfs_brelse4(&qbh);
kfree(nd);
@@ -313,20 +313,21 @@
down_ptr = adno;
set_last_pointer(i->i_sb, ad, de->down ? de_down_pointer(de) : 0);
de = de_next_de(de);
- memmove((char *)nd + 20, de, nd->first_free + (char *)nd - (char *)de);
- nd->first_free -= (char *)de - (char *)nd - 20;
- memcpy(d, nd, nd->first_free);
+ memmove((char *)nd + 20, de, le32_to_cpu(nd->first_free) + (char *)nd - (char *)de);
+ nd->first_free = cpu_to_le32(le32_to_cpu(nd->first_free) - ((char *)de - (char *)nd - 20));
+ memcpy(d, nd, le32_to_cpu(nd->first_free));
for_all_poss(i, hpfs_pos_del, (loff_t)dno << 4, pos);
fix_up_ptrs(i->i_sb, ad);
if (!d->root_dnode) {
- dno = ad->up = d->up;
+ ad->up = d->up;
+ dno = le32_to_cpu(ad->up);
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
hpfs_mark_4buffers_dirty(&qbh1);
hpfs_brelse4(&qbh1);
goto go_up;
}
- if (!(rd = hpfs_alloc_dnode(i->i_sb, d->up, &rdno, &qbh2, 0))) {
+ if (!(rd = hpfs_alloc_dnode(i->i_sb, le32_to_cpu(d->up), &rdno, &qbh2))) {
hpfs_error(i->i_sb, "unable to alloc dnode - dnode tree will be corrupted");
hpfs_brelse4(&qbh);
hpfs_brelse4(&qbh1);
@@ -338,7 +339,7 @@
i->i_blocks += 4;
rd->root_dnode = 1;
rd->up = d->up;
- if (!(fnode = hpfs_map_fnode(i->i_sb, d->up, &bh))) {
+ if (!(fnode = hpfs_map_fnode(i->i_sb, le32_to_cpu(d->up), &bh))) {
hpfs_free_dnode(i->i_sb, rdno);
hpfs_brelse4(&qbh);
hpfs_brelse4(&qbh1);
@@ -347,10 +348,11 @@
kfree(nname);
return 1;
}
- fnode->u.external[0].disk_secno = rdno;
+ fnode->u.external[0].disk_secno = cpu_to_le32(rdno);
mark_buffer_dirty(bh);
brelse(bh);
- d->up = ad->up = hpfs_i(i)->i_dno = rdno;
+ hpfs_i(i)->i_dno = rdno;
+ d->up = ad->up = cpu_to_le32(rdno);
d->root_dnode = ad->root_dnode = 0;
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
@@ -373,7 +375,7 @@
int hpfs_add_dirent(struct inode *i,
const unsigned char *name, unsigned namelen,
- struct hpfs_dirent *new_de, int cdepth)
+ struct hpfs_dirent *new_de)
{
struct hpfs_inode_info *hpfs_inode = hpfs_i(i);
struct dnode *d;
@@ -403,7 +405,6 @@
}
}
hpfs_brelse4(&qbh);
- if (!cdepth) hpfs_lock_creation(i->i_sb);
if (hpfs_check_free_dnodes(i->i_sb, FREE_DNODES_ADD)) {
c = 1;
goto ret;
@@ -411,7 +412,6 @@
i->i_version++;
c = hpfs_add_to_dnode(i, dno, name, namelen, new_de, 0);
ret:
- if (!cdepth) hpfs_unlock_creation(i->i_sb);
return c;
}
@@ -437,9 +437,9 @@
return 0;
if (!(dnode = hpfs_map_dnode(i->i_sb, dno, &qbh))) return 0;
if (hpfs_sb(i->i_sb)->sb_chk) {
- if (dnode->up != chk_up) {
+ if (le32_to_cpu(dnode->up) != chk_up) {
hpfs_error(i->i_sb, "move_to_top: up pointer from %08x should be %08x, is %08x",
- dno, chk_up, dnode->up);
+ dno, chk_up, le32_to_cpu(dnode->up));
hpfs_brelse4(&qbh);
return 0;
}
@@ -455,7 +455,7 @@
hpfs_brelse4(&qbh);
}
while (!(de = dnode_pre_last_de(dnode))) {
- dnode_secno up = dnode->up;
+ dnode_secno up = le32_to_cpu(dnode->up);
hpfs_brelse4(&qbh);
hpfs_free_dnode(i->i_sb, dno);
i->i_size -= 2048;
@@ -474,8 +474,8 @@
hpfs_brelse4(&qbh);
return 0;
}
- dnode->first_free -= 4;
- de->length -= 4;
+ dnode->first_free = cpu_to_le32(le32_to_cpu(dnode->first_free) - 4);
+ de->length = cpu_to_le16(le16_to_cpu(de->length) - 4);
de->down = 0;
hpfs_mark_4buffers_dirty(&qbh);
dno = up;
@@ -483,12 +483,12 @@
t = get_pos(dnode, de);
for_all_poss(i, hpfs_pos_subst, t, 4);
for_all_poss(i, hpfs_pos_subst, t + 1, 5);
- if (!(nde = kmalloc(de->length, GFP_NOFS))) {
+ if (!(nde = kmalloc(le16_to_cpu(de->length), GFP_NOFS))) {
hpfs_error(i->i_sb, "out of memory for dirent - directory will be corrupted");
hpfs_brelse4(&qbh);
return 0;
}
- memcpy(nde, de, de->length);
+ memcpy(nde, de, le16_to_cpu(de->length));
ddno = de->down ? de_down_pointer(de) : 0;
hpfs_delete_de(i->i_sb, dnode, de);
set_last_pointer(i->i_sb, dnode, ddno);
@@ -517,11 +517,11 @@
try_it_again:
if (hpfs_stop_cycles(i->i_sb, dno, &c1, &c2, "delete_empty_dnode")) return;
if (!(dnode = hpfs_map_dnode(i->i_sb, dno, &qbh))) return;
- if (dnode->first_free > 56) goto end;
- if (dnode->first_free == 52 || dnode->first_free == 56) {
+ if (le32_to_cpu(dnode->first_free) > 56) goto end;
+ if (le32_to_cpu(dnode->first_free) == 52 || le32_to_cpu(dnode->first_free) == 56) {
struct hpfs_dirent *de_end;
int root = dnode->root_dnode;
- up = dnode->up;
+ up = le32_to_cpu(dnode->up);
de = dnode_first_de(dnode);
down = de->down ? de_down_pointer(de) : 0;
if (hpfs_sb(i->i_sb)->sb_chk) if (root && !down) {
@@ -545,13 +545,13 @@
return;
}
if ((d1 = hpfs_map_dnode(i->i_sb, down, &qbh1))) {
- d1->up = up;
+ d1->up = cpu_to_le32(up);
d1->root_dnode = 1;
hpfs_mark_4buffers_dirty(&qbh1);
hpfs_brelse4(&qbh1);
}
if ((fnode = hpfs_map_fnode(i->i_sb, up, &bh))) {
- fnode->u.external[0].disk_secno = down;
+ fnode->u.external[0].disk_secno = cpu_to_le32(down);
mark_buffer_dirty(bh);
brelse(bh);
}
@@ -570,22 +570,22 @@
for_all_poss(i, hpfs_pos_subst, ((loff_t)dno << 4) | 1, ((loff_t)up << 4) | p);
if (!down) {
de->down = 0;
- de->length -= 4;
- dnode->first_free -= 4;
+ de->length = cpu_to_le16(le16_to_cpu(de->length) - 4);
+ dnode->first_free = cpu_to_le32(le32_to_cpu(dnode->first_free) - 4);
memmove(de_next_de(de), (char *)de_next_de(de) + 4,
- (char *)dnode + dnode->first_free - (char *)de_next_de(de));
+ (char *)dnode + le32_to_cpu(dnode->first_free) - (char *)de_next_de(de));
} else {
struct dnode *d1;
struct quad_buffer_head qbh1;
- *(dnode_secno *) ((void *) de + de->length - 4) = down;
+ *(dnode_secno *) ((void *) de + le16_to_cpu(de->length) - 4) = down;
if ((d1 = hpfs_map_dnode(i->i_sb, down, &qbh1))) {
- d1->up = up;
+ d1->up = cpu_to_le32(up);
hpfs_mark_4buffers_dirty(&qbh1);
hpfs_brelse4(&qbh1);
}
}
} else {
- hpfs_error(i->i_sb, "delete_empty_dnode: dnode %08x, first_free == %03x", dno, dnode->first_free);
+ hpfs_error(i->i_sb, "delete_empty_dnode: dnode %08x, first_free == %03x", dno, le32_to_cpu(dnode->first_free));
goto end;
}
@@ -596,18 +596,18 @@
struct quad_buffer_head qbh1;
if (!de_next->down) goto endm;
ndown = de_down_pointer(de_next);
- if (!(de_cp = kmalloc(de->length, GFP_NOFS))) {
+ if (!(de_cp = kmalloc(le16_to_cpu(de->length), GFP_NOFS))) {
printk("HPFS: out of memory for dtree balancing\n");
goto endm;
}
- memcpy(de_cp, de, de->length);
+ memcpy(de_cp, de, le16_to_cpu(de->length));
hpfs_delete_de(i->i_sb, dnode, de);
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
for_all_poss(i, hpfs_pos_subst, ((loff_t)up << 4) | p, 4);
for_all_poss(i, hpfs_pos_del, ((loff_t)up << 4) | p, 1);
if (de_cp->down) if ((d1 = hpfs_map_dnode(i->i_sb, de_down_pointer(de_cp), &qbh1))) {
- d1->up = ndown;
+ d1->up = cpu_to_le32(ndown);
hpfs_mark_4buffers_dirty(&qbh1);
hpfs_brelse4(&qbh1);
}
@@ -635,7 +635,7 @@
struct hpfs_dirent *del = dnode_last_de(d1);
dlp = del->down ? de_down_pointer(del) : 0;
if (!dlp && down) {
- if (d1->first_free > 2044) {
+ if (le32_to_cpu(d1->first_free) > 2044) {
if (hpfs_sb(i->i_sb)->sb_chk >= 2) {
printk("HPFS: warning: unbalanced dnode tree, see hpfs.txt 4 more info\n");
printk("HPFS: warning: terminating balancing operation\n");
@@ -647,38 +647,38 @@
printk("HPFS: warning: unbalanced dnode tree, see hpfs.txt 4 more info\n");
printk("HPFS: warning: goin'on\n");
}
- del->length += 4;
+ del->length = cpu_to_le16(le16_to_cpu(del->length) + 4);
del->down = 1;
- d1->first_free += 4;
+ d1->first_free = cpu_to_le32(le32_to_cpu(d1->first_free) + 4);
}
if (dlp && !down) {
- del->length -= 4;
+ del->length = cpu_to_le16(le16_to_cpu(del->length) - 4);
del->down = 0;
- d1->first_free -= 4;
+ d1->first_free = cpu_to_le32(le32_to_cpu(d1->first_free) - 4);
} else if (down)
- *(dnode_secno *) ((void *) del + del->length - 4) = down;
+ *(dnode_secno *) ((void *) del + le16_to_cpu(del->length) - 4) = cpu_to_le32(down);
} else goto endm;
- if (!(de_cp = kmalloc(de_prev->length, GFP_NOFS))) {
+ if (!(de_cp = kmalloc(le16_to_cpu(de_prev->length), GFP_NOFS))) {
printk("HPFS: out of memory for dtree balancing\n");
hpfs_brelse4(&qbh1);
goto endm;
}
hpfs_mark_4buffers_dirty(&qbh1);
hpfs_brelse4(&qbh1);
- memcpy(de_cp, de_prev, de_prev->length);
+ memcpy(de_cp, de_prev, le16_to_cpu(de_prev->length));
hpfs_delete_de(i->i_sb, dnode, de_prev);
if (!de_prev->down) {
- de_prev->length += 4;
+ de_prev->length = cpu_to_le16(le16_to_cpu(de_prev->length) + 4);
de_prev->down = 1;
- dnode->first_free += 4;
+ dnode->first_free = cpu_to_le32(le32_to_cpu(dnode->first_free) + 4);
}
- *(dnode_secno *) ((void *) de_prev + de_prev->length - 4) = ndown;
+ *(dnode_secno *) ((void *) de_prev + le16_to_cpu(de_prev->length) - 4) = cpu_to_le32(ndown);
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
for_all_poss(i, hpfs_pos_subst, ((loff_t)up << 4) | (p - 1), 4);
for_all_poss(i, hpfs_pos_subst, ((loff_t)up << 4) | p, ((loff_t)up << 4) | (p - 1));
if (down) if ((d1 = hpfs_map_dnode(i->i_sb, de_down_pointer(de), &qbh1))) {
- d1->up = ndown;
+ d1->up = cpu_to_le32(ndown);
hpfs_mark_4buffers_dirty(&qbh1);
hpfs_brelse4(&qbh1);
}
@@ -701,7 +701,6 @@
{
struct dnode *dnode = qbh->data;
dnode_secno down = 0;
- int lock = 0;
loff_t t;
if (de->first || de->last) {
hpfs_error(i->i_sb, "hpfs_remove_dirent: attempt to delete first or last dirent in dnode %08x", dno);
@@ -710,11 +709,8 @@
}
if (de->down) down = de_down_pointer(de);
if (depth && (de->down || (de == dnode_first_de(dnode) && de_next_de(de)->last))) {
- lock = 1;
- hpfs_lock_creation(i->i_sb);
if (hpfs_check_free_dnodes(i->i_sb, FREE_DNODES_DEL)) {
hpfs_brelse4(qbh);
- hpfs_unlock_creation(i->i_sb);
return 2;
}
}
@@ -727,11 +723,9 @@
dnode_secno a = move_to_top(i, down, dno);
for_all_poss(i, hpfs_pos_subst, 5, t);
if (a) delete_empty_dnode(i, a);
- if (lock) hpfs_unlock_creation(i->i_sb);
return !a;
}
delete_empty_dnode(i, dno);
- if (lock) hpfs_unlock_creation(i->i_sb);
return 0;
}
@@ -751,8 +745,8 @@
ptr = 0;
go_up:
if (!(dnode = hpfs_map_dnode(s, dno, &qbh))) return;
- if (hpfs_sb(s)->sb_chk) if (odno && odno != -1 && dnode->up != odno)
- hpfs_error(s, "hpfs_count_dnodes: bad up pointer; dnode %08x, down %08x points to %08x", odno, dno, dnode->up);
+ if (hpfs_sb(s)->sb_chk) if (odno && odno != -1 && le32_to_cpu(dnode->up) != odno)
+ hpfs_error(s, "hpfs_count_dnodes: bad up pointer; dnode %08x, down %08x points to %08x", odno, dno, le32_to_cpu(dnode->up));
de = dnode_first_de(dnode);
if (ptr) while(1) {
if (de->down) if (de_down_pointer(de) == ptr) goto process_de;
@@ -776,7 +770,7 @@
if (!de->first && !de->last && n_items) (*n_items)++;
if ((de = de_next_de(de)) < dnode_end_de(dnode)) goto next_de;
ptr = dno;
- dno = dnode->up;
+ dno = le32_to_cpu(dnode->up);
if (dnode->root_dnode) {
hpfs_brelse4(&qbh);
return;
@@ -824,8 +818,8 @@
return d;
if (!(de = map_nth_dirent(s, d, 1, &qbh, NULL))) return dno;
if (hpfs_sb(s)->sb_chk)
- if (up && ((struct dnode *)qbh.data)->up != up)
- hpfs_error(s, "hpfs_de_as_down_as_possible: bad up pointer; dnode %08x, down %08x points to %08x", up, d, ((struct dnode *)qbh.data)->up);
+ if (up && le32_to_cpu(((struct dnode *)qbh.data)->up) != up)
+ hpfs_error(s, "hpfs_de_as_down_as_possible: bad up pointer; dnode %08x, down %08x points to %08x", up, d, le32_to_cpu(((struct dnode *)qbh.data)->up));
if (!de->down) {
hpfs_brelse4(&qbh);
return d;
@@ -874,7 +868,7 @@
/* Going up */
if (dnode->root_dnode) goto bail;
- if (!(up_dnode = hpfs_map_dnode(inode->i_sb, dnode->up, &qbh0)))
+ if (!(up_dnode = hpfs_map_dnode(inode->i_sb, le32_to_cpu(dnode->up), &qbh0)))
goto bail;
end_up_de = dnode_end_de(up_dnode);
@@ -882,16 +876,16 @@
for (up_de = dnode_first_de(up_dnode); up_de < end_up_de;
up_de = de_next_de(up_de)) {
if (!(++c & 077)) hpfs_error(inode->i_sb,
- "map_pos_dirent: pos crossed dnode boundary; dnode = %08x", dnode->up);
+ "map_pos_dirent: pos crossed dnode boundary; dnode = %08x", le32_to_cpu(dnode->up));
if (up_de->down && de_down_pointer(up_de) == dno) {
- *posp = ((loff_t) dnode->up << 4) + c;
+ *posp = ((loff_t) le32_to_cpu(dnode->up) << 4) + c;
hpfs_brelse4(&qbh0);
return de;
}
}
hpfs_error(inode->i_sb, "map_pos_dirent: pointer to dnode %08x not found in parent dnode %08x",
- dno, dnode->up);
+ dno, le32_to_cpu(dnode->up));
hpfs_brelse4(&qbh0);
bail:
@@ -1017,17 +1011,17 @@
/*name2[15] = 0xff;*/
name1len = 15; name2len = 256;
}
- if (!(upf = hpfs_map_fnode(s, f->up, &bh))) {
+ if (!(upf = hpfs_map_fnode(s, le32_to_cpu(f->up), &bh))) {
kfree(name2);
return NULL;
}
if (!upf->dirflag) {
brelse(bh);
- hpfs_error(s, "fnode %08x has non-directory parent %08x", fno, f->up);
+ hpfs_error(s, "fnode %08x has non-directory parent %08x", fno, le32_to_cpu(f->up));
kfree(name2);
return NULL;
}
- dno = upf->u.external[0].disk_secno;
+ dno = le32_to_cpu(upf->u.external[0].disk_secno);
brelse(bh);
go_down:
downd = 0;
@@ -1049,7 +1043,7 @@
return NULL;
}
next_de:
- if (de->fnode == fno) {
+ if (le32_to_cpu(de->fnode) == fno) {
kfree(name2);
return de;
}
@@ -1065,7 +1059,7 @@
goto go_down;
}
f:
- if (de->fnode == fno) {
+ if (le32_to_cpu(de->fnode) == fno) {
kfree(name2);
return de;
}
@@ -1074,7 +1068,7 @@
if ((de = de_next_de(de)) < de_end) goto next_de;
if (d->root_dnode) goto not_found;
downd = dno;
- dno = d->up;
+ dno = le32_to_cpu(d->up);
hpfs_brelse4(qbh);
if (hpfs_sb(s)->sb_chk)
if (hpfs_stop_cycles(s, downd, &d1, &d2, "map_fnode_dirent #2")) {
diff --git a/fs/hpfs/ea.c b/fs/hpfs/ea.c
index 45e53d9..d8b84d1 100644
--- a/fs/hpfs/ea.c
+++ b/fs/hpfs/ea.c
@@ -24,7 +24,7 @@
}
if (hpfs_ea_read(s, a, ano, pos, 4, ex)) return;
if (ea->indirect) {
- if (ea->valuelen != 8) {
+ if (ea_valuelen(ea) != 8) {
hpfs_error(s, "ea->indirect set while ea->valuelen!=8, %s %08x, pos %08x",
ano ? "anode" : "sectors", a, pos);
return;
@@ -33,7 +33,7 @@
return;
hpfs_ea_remove(s, ea_sec(ea), ea->anode, ea_len(ea));
}
- pos += ea->namelen + ea->valuelen + 5;
+ pos += ea->namelen + ea_valuelen(ea) + 5;
}
if (!ano) hpfs_free_sectors(s, a, (len+511) >> 9);
else {
@@ -76,24 +76,24 @@
unsigned pos;
int ano, len;
secno a;
+ char ex[4 + 255 + 1 + 8];
struct extended_attribute *ea;
struct extended_attribute *ea_end = fnode_end_ea(fnode);
for (ea = fnode_ea(fnode); ea < ea_end; ea = next_ea(ea))
if (!strcmp(ea->name, key)) {
if (ea->indirect)
goto indirect;
- if (ea->valuelen >= size)
+ if (ea_valuelen(ea) >= size)
return -EINVAL;
- memcpy(buf, ea_data(ea), ea->valuelen);
- buf[ea->valuelen] = 0;
+ memcpy(buf, ea_data(ea), ea_valuelen(ea));
+ buf[ea_valuelen(ea)] = 0;
return 0;
}
- a = fnode->ea_secno;
- len = fnode->ea_size_l;
+ a = le32_to_cpu(fnode->ea_secno);
+ len = le32_to_cpu(fnode->ea_size_l);
ano = fnode->ea_anode;
pos = 0;
while (pos < len) {
- char ex[4 + 255 + 1 + 8];
ea = (struct extended_attribute *)ex;
if (pos + 4 > len) {
hpfs_error(s, "EAs don't end correctly, %s %08x, len %08x",
@@ -106,14 +106,14 @@
if (!strcmp(ea->name, key)) {
if (ea->indirect)
goto indirect;
- if (ea->valuelen >= size)
+ if (ea_valuelen(ea) >= size)
return -EINVAL;
- if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea->valuelen, buf))
+ if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea_valuelen(ea), buf))
return -EIO;
- buf[ea->valuelen] = 0;
+ buf[ea_valuelen(ea)] = 0;
return 0;
}
- pos += ea->namelen + ea->valuelen + 5;
+ pos += ea->namelen + ea_valuelen(ea) + 5;
}
return -ENOENT;
indirect:
@@ -138,16 +138,16 @@
if (!strcmp(ea->name, key)) {
if (ea->indirect)
return get_indirect_ea(s, ea->anode, ea_sec(ea), *size = ea_len(ea));
- if (!(ret = kmalloc((*size = ea->valuelen) + 1, GFP_NOFS))) {
+ if (!(ret = kmalloc((*size = ea_valuelen(ea)) + 1, GFP_NOFS))) {
printk("HPFS: out of memory for EA\n");
return NULL;
}
- memcpy(ret, ea_data(ea), ea->valuelen);
- ret[ea->valuelen] = 0;
+ memcpy(ret, ea_data(ea), ea_valuelen(ea));
+ ret[ea_valuelen(ea)] = 0;
return ret;
}
- a = fnode->ea_secno;
- len = fnode->ea_size_l;
+ a = le32_to_cpu(fnode->ea_secno);
+ len = le32_to_cpu(fnode->ea_size_l);
ano = fnode->ea_anode;
pos = 0;
while (pos < len) {
@@ -164,18 +164,18 @@
if (!strcmp(ea->name, key)) {
if (ea->indirect)
return get_indirect_ea(s, ea->anode, ea_sec(ea), *size = ea_len(ea));
- if (!(ret = kmalloc((*size = ea->valuelen) + 1, GFP_NOFS))) {
+ if (!(ret = kmalloc((*size = ea_valuelen(ea)) + 1, GFP_NOFS))) {
printk("HPFS: out of memory for EA\n");
return NULL;
}
- if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea->valuelen, ret)) {
+ if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea_valuelen(ea), ret)) {
kfree(ret);
return NULL;
}
- ret[ea->valuelen] = 0;
+ ret[ea_valuelen(ea)] = 0;
return ret;
}
- pos += ea->namelen + ea->valuelen + 5;
+ pos += ea->namelen + ea_valuelen(ea) + 5;
}
return NULL;
}
@@ -202,13 +202,13 @@
if (ea->indirect) {
if (ea_len(ea) == size)
set_indirect_ea(s, ea->anode, ea_sec(ea), data, size);
- } else if (ea->valuelen == size) {
+ } else if (ea_valuelen(ea) == size) {
memcpy(ea_data(ea), data, size);
}
return;
}
- a = fnode->ea_secno;
- len = fnode->ea_size_l;
+ a = le32_to_cpu(fnode->ea_secno);
+ len = le32_to_cpu(fnode->ea_size_l);
ano = fnode->ea_anode;
pos = 0;
while (pos < len) {
@@ -228,68 +228,70 @@
set_indirect_ea(s, ea->anode, ea_sec(ea), data, size);
}
else {
- if (ea->valuelen == size)
+ if (ea_valuelen(ea) == size)
hpfs_ea_write(s, a, ano, pos + 4 + ea->namelen + 1, size, data);
}
return;
}
- pos += ea->namelen + ea->valuelen + 5;
+ pos += ea->namelen + ea_valuelen(ea) + 5;
}
- if (!fnode->ea_offs) {
- /*if (fnode->ea_size_s) {
+ if (!le16_to_cpu(fnode->ea_offs)) {
+ /*if (le16_to_cpu(fnode->ea_size_s)) {
hpfs_error(s, "fnode %08x: ea_size_s == %03x, ea_offs == 0",
- inode->i_ino, fnode->ea_size_s);
+ inode->i_ino, le16_to_cpu(fnode->ea_size_s));
return;
}*/
- fnode->ea_offs = 0xc4;
+ fnode->ea_offs = cpu_to_le16(0xc4);
}
- if (fnode->ea_offs < 0xc4 || fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s > 0x200) {
+ if (le16_to_cpu(fnode->ea_offs) < 0xc4 || le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s) > 0x200) {
hpfs_error(s, "fnode %08lx: ea_offs == %03x, ea_size_s == %03x",
(unsigned long)inode->i_ino,
- fnode->ea_offs, fnode->ea_size_s);
+ le32_to_cpu(fnode->ea_offs), le16_to_cpu(fnode->ea_size_s));
return;
}
- if ((fnode->ea_size_s || !fnode->ea_size_l) &&
- fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s + strlen(key) + size + 5 <= 0x200) {
+ if ((le16_to_cpu(fnode->ea_size_s) || !le32_to_cpu(fnode->ea_size_l)) &&
+ le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s) + strlen(key) + size + 5 <= 0x200) {
ea = fnode_end_ea(fnode);
*(char *)ea = 0;
ea->namelen = strlen(key);
- ea->valuelen = size;
+ ea->valuelen_lo = size;
+ ea->valuelen_hi = size >> 8;
strcpy(ea->name, key);
memcpy(ea_data(ea), data, size);
- fnode->ea_size_s += strlen(key) + size + 5;
+ fnode->ea_size_s = cpu_to_le16(le16_to_cpu(fnode->ea_size_s) + strlen(key) + size + 5);
goto ret;
}
/* Most the code here is 99.9993422% unused. I hope there are no bugs.
But what .. HPFS.IFS has also bugs in ea management. */
- if (fnode->ea_size_s && !fnode->ea_size_l) {
+ if (le16_to_cpu(fnode->ea_size_s) && !le32_to_cpu(fnode->ea_size_l)) {
secno n;
struct buffer_head *bh;
char *data;
- if (!(n = hpfs_alloc_sector(s, fno, 1, 0, 1))) return;
+ if (!(n = hpfs_alloc_sector(s, fno, 1, 0))) return;
if (!(data = hpfs_get_sector(s, n, &bh))) {
hpfs_free_sectors(s, n, 1);
return;
}
- memcpy(data, fnode_ea(fnode), fnode->ea_size_s);
- fnode->ea_size_l = fnode->ea_size_s;
- fnode->ea_size_s = 0;
- fnode->ea_secno = n;
- fnode->ea_anode = 0;
+ memcpy(data, fnode_ea(fnode), le16_to_cpu(fnode->ea_size_s));
+ fnode->ea_size_l = cpu_to_le32(le16_to_cpu(fnode->ea_size_s));
+ fnode->ea_size_s = cpu_to_le16(0);
+ fnode->ea_secno = cpu_to_le32(n);
+ fnode->ea_anode = cpu_to_le32(0);
mark_buffer_dirty(bh);
brelse(bh);
}
- pos = fnode->ea_size_l + 5 + strlen(key) + size;
- len = (fnode->ea_size_l + 511) >> 9;
+ pos = le32_to_cpu(fnode->ea_size_l) + 5 + strlen(key) + size;
+ len = (le32_to_cpu(fnode->ea_size_l) + 511) >> 9;
if (pos >= 30000) goto bail;
while (((pos + 511) >> 9) > len) {
if (!len) {
- if (!(fnode->ea_secno = hpfs_alloc_sector(s, fno, 1, 0, 1)))
- goto bail;
+ secno q = hpfs_alloc_sector(s, fno, 1, 0);
+ if (!q) goto bail;
+ fnode->ea_secno = cpu_to_le32(q);
fnode->ea_anode = 0;
len++;
} else if (!fnode->ea_anode) {
- if (hpfs_alloc_if_possible(s, fnode->ea_secno + len)) {
+ if (hpfs_alloc_if_possible(s, le32_to_cpu(fnode->ea_secno) + len)) {
len++;
} else {
/* Aargh... don't know how to create ea anodes :-( */
@@ -298,26 +300,26 @@
anode_secno a_s;
if (!(anode = hpfs_alloc_anode(s, fno, &a_s, &bh)))
goto bail;
- anode->up = fno;
+ anode->up = cpu_to_le32(fno);
anode->btree.fnode_parent = 1;
anode->btree.n_free_nodes--;
anode->btree.n_used_nodes++;
- anode->btree.first_free += 12;
- anode->u.external[0].disk_secno = fnode->ea_secno;
- anode->u.external[0].file_secno = 0;
- anode->u.external[0].length = len;
+ anode->btree.first_free = cpu_to_le16(le16_to_cpu(anode->btree.first_free) + 12);
+ anode->u.external[0].disk_secno = cpu_to_le32(le32_to_cpu(fnode->ea_secno));
+ anode->u.external[0].file_secno = cpu_to_le32(0);
+ anode->u.external[0].length = cpu_to_le32(len);
mark_buffer_dirty(bh);
brelse(bh);
fnode->ea_anode = 1;
- fnode->ea_secno = a_s;*/
+ fnode->ea_secno = cpu_to_le32(a_s);*/
secno new_sec;
int i;
- if (!(new_sec = hpfs_alloc_sector(s, fno, 1, 1 - ((pos + 511) >> 9), 1)))
+ if (!(new_sec = hpfs_alloc_sector(s, fno, 1, 1 - ((pos + 511) >> 9))))
goto bail;
for (i = 0; i < len; i++) {
struct buffer_head *bh1, *bh2;
void *b1, *b2;
- if (!(b1 = hpfs_map_sector(s, fnode->ea_secno + i, &bh1, len - i - 1))) {
+ if (!(b1 = hpfs_map_sector(s, le32_to_cpu(fnode->ea_secno) + i, &bh1, len - i - 1))) {
hpfs_free_sectors(s, new_sec, (pos + 511) >> 9);
goto bail;
}
@@ -331,13 +333,13 @@
mark_buffer_dirty(bh2);
brelse(bh2);
}
- hpfs_free_sectors(s, fnode->ea_secno, len);
- fnode->ea_secno = new_sec;
+ hpfs_free_sectors(s, le32_to_cpu(fnode->ea_secno), len);
+ fnode->ea_secno = cpu_to_le32(new_sec);
len = (pos + 511) >> 9;
}
}
if (fnode->ea_anode) {
- if (hpfs_add_sector_to_btree(s, fnode->ea_secno,
+ if (hpfs_add_sector_to_btree(s, le32_to_cpu(fnode->ea_secno),
0, len) != -1) {
len++;
} else {
@@ -349,17 +351,17 @@
h[1] = strlen(key);
h[2] = size & 0xff;
h[3] = size >> 8;
- if (hpfs_ea_write(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l, 4, h)) goto bail;
- if (hpfs_ea_write(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l + 4, h[1] + 1, key)) goto bail;
- if (hpfs_ea_write(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l + 5 + h[1], size, data)) goto bail;
- fnode->ea_size_l = pos;
+ if (hpfs_ea_write(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l), 4, h)) goto bail;
+ if (hpfs_ea_write(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l) + 4, h[1] + 1, key)) goto bail;
+ if (hpfs_ea_write(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l) + 5 + h[1], size, data)) goto bail;
+ fnode->ea_size_l = cpu_to_le32(pos);
ret:
hpfs_i(inode)->i_ea_size += 5 + strlen(key) + size;
return;
bail:
- if (fnode->ea_secno)
- if (fnode->ea_anode) hpfs_truncate_btree(s, fnode->ea_secno, 1, (fnode->ea_size_l + 511) >> 9);
- else hpfs_free_sectors(s, fnode->ea_secno + ((fnode->ea_size_l + 511) >> 9), len - ((fnode->ea_size_l + 511) >> 9));
- else fnode->ea_secno = fnode->ea_size_l = 0;
+ if (le32_to_cpu(fnode->ea_secno))
+ if (fnode->ea_anode) hpfs_truncate_btree(s, le32_to_cpu(fnode->ea_secno), 1, (le32_to_cpu(fnode->ea_size_l) + 511) >> 9);
+ else hpfs_free_sectors(s, le32_to_cpu(fnode->ea_secno) + ((le32_to_cpu(fnode->ea_size_l) + 511) >> 9), len - ((le32_to_cpu(fnode->ea_size_l) + 511) >> 9));
+ else fnode->ea_secno = fnode->ea_size_l = cpu_to_le32(0);
}
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 9b9eb69..89c500e 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -20,8 +20,8 @@
int hpfs_file_fsync(struct file *file, int datasync)
{
- /*return file_fsync(file, datasync);*/
- return 0; /* Don't fsync :-) */
+ struct inode *inode = file->f_mapping->host;
+ return sync_blockdev(inode->i_sb->s_bdev);
}
/*
@@ -48,38 +48,46 @@
static void hpfs_truncate(struct inode *i)
{
if (IS_IMMUTABLE(i)) return /*-EPERM*/;
- hpfs_lock(i->i_sb);
+ hpfs_lock_assert(i->i_sb);
+
hpfs_i(i)->i_n_secs = 0;
i->i_blocks = 1 + ((i->i_size + 511) >> 9);
hpfs_i(i)->mmu_private = i->i_size;
hpfs_truncate_btree(i->i_sb, i->i_ino, 1, ((i->i_size + 511) >> 9));
hpfs_write_inode(i);
hpfs_i(i)->i_n_secs = 0;
- hpfs_unlock(i->i_sb);
}
static int hpfs_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
{
+ int r;
secno s;
+ hpfs_lock(inode->i_sb);
s = hpfs_bmap(inode, iblock);
if (s) {
map_bh(bh_result, inode->i_sb, s);
- return 0;
+ goto ret_0;
}
- if (!create) return 0;
+ if (!create) goto ret_0;
if (iblock<<9 != hpfs_i(inode)->mmu_private) {
BUG();
- return -EIO;
+ r = -EIO;
+ goto ret_r;
}
if ((s = hpfs_add_sector_to_btree(inode->i_sb, inode->i_ino, 1, inode->i_blocks - 1)) == -1) {
hpfs_truncate_btree(inode->i_sb, inode->i_ino, 1, inode->i_blocks - 1);
- return -ENOSPC;
+ r = -ENOSPC;
+ goto ret_r;
}
inode->i_blocks++;
hpfs_i(inode)->mmu_private += 512;
set_buffer_new(bh_result);
map_bh(bh_result, inode->i_sb, s);
- return 0;
+ ret_0:
+ r = 0;
+ ret_r:
+ hpfs_unlock(inode->i_sb);
+ return r;
}
static int hpfs_writepage(struct page *page, struct writeback_control *wbc)
@@ -130,8 +138,11 @@
ssize_t retval;
retval = do_sync_write(file, buf, count, ppos);
- if (retval > 0)
+ if (retval > 0) {
+ hpfs_lock(file->f_path.dentry->d_sb);
hpfs_i(file->f_path.dentry->d_inode)->i_dirty = 1;
+ hpfs_unlock(file->f_path.dentry->d_sb);
+ }
return retval;
}
diff --git a/fs/hpfs/hpfs.h b/fs/hpfs/hpfs.h
index 0e84c73..8b0650a 100644
--- a/fs/hpfs/hpfs.h
+++ b/fs/hpfs/hpfs.h
@@ -19,9 +19,13 @@
For definitive information on HPFS, ask somebody else -- this is guesswork.
There are certain to be many mistakes. */
+#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+#error unknown endian
+#endif
+
/* Notation */
-typedef unsigned secno; /* sector number, partition relative */
+typedef u32 secno; /* sector number, partition relative */
typedef secno dnode_secno; /* sector number of a dnode */
typedef secno fnode_secno; /* sector number of an fnode */
@@ -38,28 +42,28 @@
struct hpfs_boot_block
{
- unsigned char jmp[3];
- unsigned char oem_id[8];
- unsigned char bytes_per_sector[2]; /* 512 */
- unsigned char sectors_per_cluster;
- unsigned char n_reserved_sectors[2];
- unsigned char n_fats;
- unsigned char n_rootdir_entries[2];
- unsigned char n_sectors_s[2];
- unsigned char media_byte;
- unsigned short sectors_per_fat;
- unsigned short sectors_per_track;
- unsigned short heads_per_cyl;
- unsigned int n_hidden_sectors;
- unsigned int n_sectors_l; /* size of partition */
- unsigned char drive_number;
- unsigned char mbz;
- unsigned char sig_28h; /* 28h */
- unsigned char vol_serno[4];
- unsigned char vol_label[11];
- unsigned char sig_hpfs[8]; /* "HPFS " */
- unsigned char pad[448];
- unsigned short magic; /* aa55 */
+ u8 jmp[3];
+ u8 oem_id[8];
+ u8 bytes_per_sector[2]; /* 512 */
+ u8 sectors_per_cluster;
+ u8 n_reserved_sectors[2];
+ u8 n_fats;
+ u8 n_rootdir_entries[2];
+ u8 n_sectors_s[2];
+ u8 media_byte;
+ u16 sectors_per_fat;
+ u16 sectors_per_track;
+ u16 heads_per_cyl;
+ u32 n_hidden_sectors;
+ u32 n_sectors_l; /* size of partition */
+ u8 drive_number;
+ u8 mbz;
+ u8 sig_28h; /* 28h */
+ u8 vol_serno[4];
+ u8 vol_label[11];
+ u8 sig_hpfs[8]; /* "HPFS " */
+ u8 pad[448];
+ u16 magic; /* aa55 */
};
@@ -71,31 +75,29 @@
struct hpfs_super_block
{
- unsigned magic; /* f995 e849 */
- unsigned magic1; /* fa53 e9c5, more magic? */
- /*unsigned huh202;*/ /* ?? 202 = N. of B. in 1.00390625 S.*/
- char version; /* version of a filesystem usually 2 */
- char funcversion; /* functional version - oldest version
+ u32 magic; /* f995 e849 */
+ u32 magic1; /* fa53 e9c5, more magic? */
+ u8 version; /* version of a filesystem usually 2 */
+ u8 funcversion; /* functional version - oldest version
of filesystem that can understand
this disk */
- unsigned short int zero; /* 0 */
+ u16 zero; /* 0 */
fnode_secno root; /* fnode of root directory */
secno n_sectors; /* size of filesystem */
- unsigned n_badblocks; /* number of bad blocks */
+ u32 n_badblocks; /* number of bad blocks */
secno bitmaps; /* pointers to free space bit maps */
- unsigned zero1; /* 0 */
+ u32 zero1; /* 0 */
secno badblocks; /* bad block list */
- unsigned zero3; /* 0 */
+ u32 zero3; /* 0 */
time32_t last_chkdsk; /* date last checked, 0 if never */
- /*unsigned zero4;*/ /* 0 */
- time32_t last_optimize; /* date last optimized, 0 if never */
+ time32_t last_optimize; /* date last optimized, 0 if never */
secno n_dir_band; /* number of sectors in dir band */
secno dir_band_start; /* first sector in dir band */
secno dir_band_end; /* last sector in dir band */
secno dir_band_bitmap; /* free space map, 1 dnode per bit */
- char volume_name[32]; /* not used */
+ u8 volume_name[32]; /* not used */
secno user_id_table; /* 8 preallocated sectors - user id */
- unsigned zero6[103]; /* 0 */
+ u32 zero6[103]; /* 0 */
};
@@ -107,44 +109,65 @@
struct hpfs_spare_block
{
- unsigned magic; /* f991 1849 */
- unsigned magic1; /* fa52 29c5, more magic? */
+ u32 magic; /* f991 1849 */
+ u32 magic1; /* fa52 29c5, more magic? */
- unsigned dirty: 1; /* 0 clean, 1 "improperly stopped" */
- /*unsigned flag1234: 4;*/ /* unknown flags */
- unsigned sparedir_used: 1; /* spare dirblks used */
- unsigned hotfixes_used: 1; /* hotfixes used */
- unsigned bad_sector: 1; /* bad sector, corrupted disk (???) */
- unsigned bad_bitmap: 1; /* bad bitmap */
- unsigned fast: 1; /* partition was fast formatted */
- unsigned old_wrote: 1; /* old version wrote to partion */
- unsigned old_wrote_1: 1; /* old version wrote to partion (?) */
- unsigned install_dasd_limits: 1; /* HPFS386 flags */
- unsigned resynch_dasd_limits: 1;
- unsigned dasd_limits_operational: 1;
- unsigned multimedia_active: 1;
- unsigned dce_acls_active: 1;
- unsigned dasd_limits_dirty: 1;
- unsigned flag67: 2;
- unsigned char mm_contlgulty;
- unsigned char unused;
+#ifdef __LITTLE_ENDIAN
+ u8 dirty: 1; /* 0 clean, 1 "improperly stopped" */
+ u8 sparedir_used: 1; /* spare dirblks used */
+ u8 hotfixes_used: 1; /* hotfixes used */
+ u8 bad_sector: 1; /* bad sector, corrupted disk (???) */
+ u8 bad_bitmap: 1; /* bad bitmap */
+ u8 fast: 1; /* partition was fast formatted */
+ u8 old_wrote: 1; /* old version wrote to partion */
+ u8 old_wrote_1: 1; /* old version wrote to partion (?) */
+#else
+ u8 old_wrote_1: 1; /* old version wrote to partion (?) */
+ u8 old_wrote: 1; /* old version wrote to partion */
+ u8 fast: 1; /* partition was fast formatted */
+ u8 bad_bitmap: 1; /* bad bitmap */
+ u8 bad_sector: 1; /* bad sector, corrupted disk (???) */
+ u8 hotfixes_used: 1; /* hotfixes used */
+ u8 sparedir_used: 1; /* spare dirblks used */
+ u8 dirty: 1; /* 0 clean, 1 "improperly stopped" */
+#endif
+
+#ifdef __LITTLE_ENDIAN
+ u8 install_dasd_limits: 1; /* HPFS386 flags */
+ u8 resynch_dasd_limits: 1;
+ u8 dasd_limits_operational: 1;
+ u8 multimedia_active: 1;
+ u8 dce_acls_active: 1;
+ u8 dasd_limits_dirty: 1;
+ u8 flag67: 2;
+#else
+ u8 flag67: 2;
+ u8 dasd_limits_dirty: 1;
+ u8 dce_acls_active: 1;
+ u8 multimedia_active: 1;
+ u8 dasd_limits_operational: 1;
+ u8 resynch_dasd_limits: 1;
+ u8 install_dasd_limits: 1; /* HPFS386 flags */
+#endif
+
+ u8 mm_contlgulty;
+ u8 unused;
secno hotfix_map; /* info about remapped bad sectors */
- unsigned n_spares_used; /* number of hotfixes */
- unsigned n_spares; /* number of spares in hotfix map */
- unsigned n_dnode_spares_free; /* spare dnodes unused */
- unsigned n_dnode_spares; /* length of spare_dnodes[] list,
+ u32 n_spares_used; /* number of hotfixes */
+ u32 n_spares; /* number of spares in hotfix map */
+ u32 n_dnode_spares_free; /* spare dnodes unused */
+ u32 n_dnode_spares; /* length of spare_dnodes[] list,
follows in this block*/
secno code_page_dir; /* code page directory block */
- unsigned n_code_pages; /* number of code pages */
- /*unsigned large_numbers[2];*/ /* ?? */
- unsigned super_crc; /* on HPFS386 and LAN Server this is
+ u32 n_code_pages; /* number of code pages */
+ u32 super_crc; /* on HPFS386 and LAN Server this is
checksum of superblock, on normal
OS/2 unused */
- unsigned spare_crc; /* on HPFS386 checksum of spareblock */
- unsigned zero1[15]; /* unused */
+ u32 spare_crc; /* on HPFS386 checksum of spareblock */
+ u32 zero1[15]; /* unused */
dnode_secno spare_dnodes[100]; /* emergency free dnode list */
- unsigned zero2[1]; /* room for more? */
+ u32 zero2[1]; /* room for more? */
};
/* The bad block list is 4 sectors long. The first word must be zero,
@@ -179,18 +202,18 @@
struct code_page_directory
{
- unsigned magic; /* 4945 21f7 */
- unsigned n_code_pages; /* number of pointers following */
- unsigned zero1[2];
+ u32 magic; /* 4945 21f7 */
+ u32 n_code_pages; /* number of pointers following */
+ u32 zero1[2];
struct {
- unsigned short ix; /* index */
- unsigned short code_page_number; /* code page number */
- unsigned bounds; /* matches corresponding word
+ u16 ix; /* index */
+ u16 code_page_number; /* code page number */
+ u32 bounds; /* matches corresponding word
in data block */
secno code_page_data; /* sector number of a code_page_data
containing c.p. array */
- unsigned short index; /* index in c.p. array in that sector*/
- unsigned short unknown; /* some unknown value; usually 0;
+ u16 index; /* index in c.p. array in that sector*/
+ u16 unknown; /* some unknown value; usually 0;
2 in Japanese version */
} array[31]; /* unknown length */
};
@@ -201,21 +224,21 @@
struct code_page_data
{
- unsigned magic; /* 8945 21f7 */
- unsigned n_used; /* # elements used in c_p_data[] */
- unsigned bounds[3]; /* looks a bit like
+ u32 magic; /* 8945 21f7 */
+ u32 n_used; /* # elements used in c_p_data[] */
+ u32 bounds[3]; /* looks a bit like
(beg1,end1), (beg2,end2)
one byte each */
- unsigned short offs[3]; /* offsets from start of sector
+ u16 offs[3]; /* offsets from start of sector
to start of c_p_data[ix] */
struct {
- unsigned short ix; /* index */
- unsigned short code_page_number; /* code page number */
- unsigned short unknown; /* the same as in cp directory */
- unsigned char map[128]; /* upcase table for chars 80..ff */
- unsigned short zero2;
+ u16 ix; /* index */
+ u16 code_page_number; /* code page number */
+ u16 unknown; /* the same as in cp directory */
+ u8 map[128]; /* upcase table for chars 80..ff */
+ u16 zero2;
} code_page[3];
- unsigned char incognita[78];
+ u8 incognita[78];
};
@@ -255,50 +278,84 @@
#define DNODE_MAGIC 0x77e40aae
struct dnode {
- unsigned magic; /* 77e4 0aae */
- unsigned first_free; /* offset from start of dnode to
+ u32 magic; /* 77e4 0aae */
+ u32 first_free; /* offset from start of dnode to
first free dir entry */
- unsigned root_dnode:1; /* Is it root dnode? */
- unsigned increment_me:31; /* some kind of activity counter?
- Neither HPFS.IFS nor CHKDSK cares
+#ifdef __LITTLE_ENDIAN
+ u8 root_dnode: 1; /* Is it root dnode? */
+ u8 increment_me: 7; /* some kind of activity counter? */
+ /* Neither HPFS.IFS nor CHKDSK cares
if you change this word */
+#else
+ u8 increment_me: 7; /* some kind of activity counter? */
+ /* Neither HPFS.IFS nor CHKDSK cares
+ if you change this word */
+ u8 root_dnode: 1; /* Is it root dnode? */
+#endif
+ u8 increment_me2[3];
secno up; /* (root dnode) directory's fnode
(nonroot) parent dnode */
dnode_secno self; /* pointer to this dnode */
- unsigned char dirent[2028]; /* one or more dirents */
+ u8 dirent[2028]; /* one or more dirents */
};
struct hpfs_dirent {
- unsigned short length; /* offset to next dirent */
- unsigned first: 1; /* set on phony ^A^A (".") entry */
- unsigned has_acl: 1;
- unsigned down: 1; /* down pointer present (after name) */
- unsigned last: 1; /* set on phony \377 entry */
- unsigned has_ea: 1; /* entry has EA */
- unsigned has_xtd_perm: 1; /* has extended perm list (???) */
- unsigned has_explicit_acl: 1;
- unsigned has_needea: 1; /* ?? some EA has NEEDEA set
+ u16 length; /* offset to next dirent */
+
+#ifdef __LITTLE_ENDIAN
+ u8 first: 1; /* set on phony ^A^A (".") entry */
+ u8 has_acl: 1;
+ u8 down: 1; /* down pointer present (after name) */
+ u8 last: 1; /* set on phony \377 entry */
+ u8 has_ea: 1; /* entry has EA */
+ u8 has_xtd_perm: 1; /* has extended perm list (???) */
+ u8 has_explicit_acl: 1;
+ u8 has_needea: 1; /* ?? some EA has NEEDEA set
I have no idea why this is
interesting in a dir entry */
- unsigned read_only: 1; /* dos attrib */
- unsigned hidden: 1; /* dos attrib */
- unsigned system: 1; /* dos attrib */
- unsigned flag11: 1; /* would be volume label dos attrib */
- unsigned directory: 1; /* dos attrib */
- unsigned archive: 1; /* dos attrib */
- unsigned not_8x3: 1; /* name is not 8.3 */
- unsigned flag15: 1;
+#else
+ u8 has_needea: 1; /* ?? some EA has NEEDEA set
+ I have no idea why this is
+ interesting in a dir entry */
+ u8 has_explicit_acl: 1;
+ u8 has_xtd_perm: 1; /* has extended perm list (???) */
+ u8 has_ea: 1; /* entry has EA */
+ u8 last: 1; /* set on phony \377 entry */
+ u8 down: 1; /* down pointer present (after name) */
+ u8 has_acl: 1;
+ u8 first: 1; /* set on phony ^A^A (".") entry */
+#endif
+
+#ifdef __LITTLE_ENDIAN
+ u8 read_only: 1; /* dos attrib */
+ u8 hidden: 1; /* dos attrib */
+ u8 system: 1; /* dos attrib */
+ u8 flag11: 1; /* would be volume label dos attrib */
+ u8 directory: 1; /* dos attrib */
+ u8 archive: 1; /* dos attrib */
+ u8 not_8x3: 1; /* name is not 8.3 */
+ u8 flag15: 1;
+#else
+ u8 flag15: 1;
+ u8 not_8x3: 1; /* name is not 8.3 */
+ u8 archive: 1; /* dos attrib */
+ u8 directory: 1; /* dos attrib */
+ u8 flag11: 1; /* would be volume label dos attrib */
+ u8 system: 1; /* dos attrib */
+ u8 hidden: 1; /* dos attrib */
+ u8 read_only: 1; /* dos attrib */
+#endif
+
fnode_secno fnode; /* fnode giving allocation info */
time32_t write_date; /* mtime */
- unsigned file_size; /* file length, bytes */
+ u32 file_size; /* file length, bytes */
time32_t read_date; /* atime */
time32_t creation_date; /* ctime */
- unsigned ea_size; /* total EA length, bytes */
- unsigned char no_of_acls : 3; /* number of ACL's */
- unsigned char reserver : 5;
- unsigned char ix; /* code page index (of filename), see
+ u32 ea_size; /* total EA length, bytes */
+ u8 no_of_acls; /* number of ACL's (low 3 bits) */
+ u8 ix; /* code page index (of filename), see
struct code_page_data */
- unsigned char namelen, name[1]; /* file name */
+ u8 namelen, name[1]; /* file name */
/* dnode_secno down; btree down pointer, if present,
follows name on next word boundary, or maybe it
precedes next dirent, which is on a word boundary. */
@@ -318,38 +375,50 @@
struct bplus_leaf_node
{
- unsigned file_secno; /* first file sector in extent */
- unsigned length; /* length, sectors */
+ u32 file_secno; /* first file sector in extent */
+ u32 length; /* length, sectors */
secno disk_secno; /* first corresponding disk sector */
};
struct bplus_internal_node
{
- unsigned file_secno; /* subtree maps sectors < this */
+ u32 file_secno; /* subtree maps sectors < this */
anode_secno down; /* pointer to subtree */
};
struct bplus_header
{
- unsigned hbff: 1; /* high bit of first free entry offset */
- unsigned flag1: 1;
- unsigned flag2: 1;
- unsigned flag3: 1;
- unsigned flag4: 1;
- unsigned fnode_parent: 1; /* ? we're pointed to by an fnode,
+#ifdef __LITTLE_ENDIAN
+ u8 hbff: 1; /* high bit of first free entry offset */
+ u8 flag1234: 4;
+ u8 fnode_parent: 1; /* ? we're pointed to by an fnode,
the data btree or some ea or the
main ea bootage pointer ea_secno */
/* also can get set in fnodes, which
may be a chkdsk glitch or may mean
this bit is irrelevant in fnodes,
or this interpretation is all wet */
- unsigned binary_search: 1; /* suggest binary search (unused) */
- unsigned internal: 1; /* 1 -> (internal) tree of anodes
+ u8 binary_search: 1; /* suggest binary search (unused) */
+ u8 internal: 1; /* 1 -> (internal) tree of anodes
0 -> (leaf) list of extents */
- unsigned char fill[3];
- unsigned char n_free_nodes; /* free nodes in following array */
- unsigned char n_used_nodes; /* used nodes in following array */
- unsigned short first_free; /* offset from start of header to
+#else
+ u8 internal: 1; /* 1 -> (internal) tree of anodes
+ 0 -> (leaf) list of extents */
+ u8 binary_search: 1; /* suggest binary search (unused) */
+ u8 fnode_parent: 1; /* ? we're pointed to by an fnode,
+ the data btree or some ea or the
+ main ea bootage pointer ea_secno */
+ /* also can get set in fnodes, which
+ may be a chkdsk glitch or may mean
+ this bit is irrelevant in fnodes,
+ or this interpretation is all wet */
+ u8 flag1234: 4;
+ u8 hbff: 1; /* high bit of first free entry offset */
+#endif
+ u8 fill[3];
+ u8 n_free_nodes; /* free nodes in following array */
+ u8 n_used_nodes; /* used nodes in following array */
+ u16 first_free; /* offset from start of header to
first free node in array */
union {
struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
@@ -369,37 +438,38 @@
struct fnode
{
- unsigned magic; /* f7e4 0aae */
- unsigned zero1[2]; /* read history */
- unsigned char len, name[15]; /* true length, truncated name */
+ u32 magic; /* f7e4 0aae */
+ u32 zero1[2]; /* read history */
+ u8 len, name[15]; /* true length, truncated name */
fnode_secno up; /* pointer to file's directory fnode */
- /*unsigned zero2[3];*/
secno acl_size_l;
secno acl_secno;
- unsigned short acl_size_s;
- char acl_anode;
- char zero2; /* history bit count */
- unsigned ea_size_l; /* length of disk-resident ea's */
+ u16 acl_size_s;
+ u8 acl_anode;
+ u8 zero2; /* history bit count */
+ u32 ea_size_l; /* length of disk-resident ea's */
secno ea_secno; /* first sector of disk-resident ea's*/
- unsigned short ea_size_s; /* length of fnode-resident ea's */
+ u16 ea_size_s; /* length of fnode-resident ea's */
- unsigned flag0: 1;
- unsigned ea_anode: 1; /* 1 -> ea_secno is an anode */
- unsigned flag2: 1;
- unsigned flag3: 1;
- unsigned flag4: 1;
- unsigned flag5: 1;
- unsigned flag6: 1;
- unsigned flag7: 1;
- unsigned dirflag: 1; /* 1 -> directory. first & only extent
+#ifdef __LITTLE_ENDIAN
+ u8 flag0: 1;
+ u8 ea_anode: 1; /* 1 -> ea_secno is an anode */
+ u8 flag234567: 6;
+#else
+ u8 flag234567: 6;
+ u8 ea_anode: 1; /* 1 -> ea_secno is an anode */
+ u8 flag0: 1;
+#endif
+
+#ifdef __LITTLE_ENDIAN
+ u8 dirflag: 1; /* 1 -> directory. first & only extent
points to dnode. */
- unsigned flag9: 1;
- unsigned flag10: 1;
- unsigned flag11: 1;
- unsigned flag12: 1;
- unsigned flag13: 1;
- unsigned flag14: 1;
- unsigned flag15: 1;
+ u8 flag9012345: 7;
+#else
+ u8 flag9012345: 7;
+ u8 dirflag: 1; /* 1 -> directory. first & only extent
+ points to dnode. */
+#endif
struct bplus_header btree; /* b+ tree, 8 extents or 12 subtrees */
union {
@@ -407,17 +477,16 @@
struct bplus_internal_node internal[12];
} u;
- unsigned file_size; /* file length, bytes */
- unsigned n_needea; /* number of EA's with NEEDEA set */
- char user_id[16]; /* unused */
- unsigned short ea_offs; /* offset from start of fnode
+ u32 file_size; /* file length, bytes */
+ u32 n_needea; /* number of EA's with NEEDEA set */
+ u8 user_id[16]; /* unused */
+ u16 ea_offs; /* offset from start of fnode
to first fnode-resident ea */
- char dasd_limit_treshhold;
- char dasd_limit_delta;
- unsigned dasd_limit;
- unsigned dasd_usage;
- /*unsigned zero5[2];*/
- unsigned char ea[316]; /* zero or more EA's, packed together
+ u8 dasd_limit_treshhold;
+ u8 dasd_limit_delta;
+ u32 dasd_limit;
+ u32 dasd_usage;
+ u8 ea[316]; /* zero or more EA's, packed together
with no alignment padding.
(Do not use this name, get here
via fnode + ea_offs. I think.) */
@@ -430,7 +499,7 @@
struct anode
{
- unsigned magic; /* 37e4 0aae */
+ u32 magic; /* 37e4 0aae */
anode_secno self; /* pointer to this anode */
secno up; /* parent anode or fnode */
@@ -440,7 +509,7 @@
struct bplus_internal_node internal[60];
} u;
- unsigned fill[3]; /* unused */
+ u32 fill[3]; /* unused */
};
@@ -461,25 +530,31 @@
struct extended_attribute
{
- unsigned indirect: 1; /* 1 -> value gives sector number
+#ifdef __LITTLE_ENDIAN
+ u8 indirect: 1; /* 1 -> value gives sector number
where real value starts */
- unsigned anode: 1; /* 1 -> sector is an anode
+ u8 anode: 1; /* 1 -> sector is an anode
that points to fragmented value */
- unsigned flag2: 1;
- unsigned flag3: 1;
- unsigned flag4: 1;
- unsigned flag5: 1;
- unsigned flag6: 1;
- unsigned needea: 1; /* required ea */
- unsigned char namelen; /* length of name, bytes */
- unsigned short valuelen; /* length of value, bytes */
- unsigned char name[0];
+ u8 flag23456: 5;
+ u8 needea: 1; /* required ea */
+#else
+ u8 needea: 1; /* required ea */
+ u8 flag23456: 5;
+ u8 anode: 1; /* 1 -> sector is an anode
+ that points to fragmented value */
+ u8 indirect: 1; /* 1 -> value gives sector number
+ where real value starts */
+#endif
+ u8 namelen; /* length of name, bytes */
+ u8 valuelen_lo; /* length of value, bytes */
+ u8 valuelen_hi; /* length of value, bytes */
+ u8 name[0];
/*
- unsigned char name[namelen]; ascii attrib name
- unsigned char nul; terminating '\0', not counted
- unsigned char value[valuelen]; value, arbitrary
+ u8 name[namelen]; ascii attrib name
+ u8 nul; terminating '\0', not counted
+ u8 value[valuelen]; value, arbitrary
if this.indirect, valuelen is 8 and the value is
- unsigned length; real length of value, bytes
+ u32 length; real length of value, bytes
secno secno; sector address where it starts
if this.anode, the above sector number is the root of an anode tree
which points to the value.
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c15adbc..dd552f8 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -13,6 +13,7 @@
#include <linux/pagemap.h>
#include <linux/buffer_head.h>
#include <linux/slab.h>
+#include <asm/unaligned.h>
#include "hpfs.h"
@@ -51,18 +52,16 @@
unsigned i_disk_sec; /* (files) minimalist cache of alloc info */
unsigned i_n_secs; /* (files) minimalist cache of alloc info */
unsigned i_ea_size; /* size of extended attributes */
- unsigned i_conv : 2; /* (files) crlf->newline hackery */
unsigned i_ea_mode : 1; /* file's permission is stored in ea */
unsigned i_ea_uid : 1; /* file's uid is stored in ea */
unsigned i_ea_gid : 1; /* file's gid is stored in ea */
unsigned i_dirty : 1;
- struct mutex i_mutex;
- struct mutex i_parent_mutex;
loff_t **i_rddir_off;
struct inode vfs_inode;
};
struct hpfs_sb_info {
+ struct mutex hpfs_mutex; /* global hpfs lock */
ino_t sb_root; /* inode number of root dir */
unsigned sb_fs_size; /* file system size, sectors */
unsigned sb_bitmaps; /* sector number of bitmap list */
@@ -74,7 +73,6 @@
uid_t sb_uid; /* uid from mount options */
gid_t sb_gid; /* gid from mount options */
umode_t sb_mode; /* mode from mount options */
- unsigned sb_conv : 2; /* crlf->newline hackery */
unsigned sb_eas : 2; /* eas: 0-ignore, 1-ro, 2-rw */
unsigned sb_err : 2; /* on errs: 0-cont, 1-ro, 2-panic */
unsigned sb_chk : 2; /* checks: 0-no, 1-normal, 2-strict */
@@ -87,20 +85,9 @@
unsigned *sb_bmp_dir; /* main bitmap directory */
unsigned sb_c_bitmap; /* current bitmap */
unsigned sb_max_fwd_alloc; /* max forwad allocation */
- struct mutex hpfs_creation_de; /* when creating dirents, nobody else
- can alloc blocks */
- /*unsigned sb_mounting : 1;*/
int sb_timeshift;
};
-/*
- * conv= options
- */
-
-#define CONV_BINARY 0 /* no conversion */
-#define CONV_TEXT 1 /* crlf->newline */
-#define CONV_AUTO 2 /* decide based on file contents */
-
/* Four 512-byte buffers and the 2k block obtained by concatenating them */
struct quad_buffer_head {
@@ -113,7 +100,7 @@
static inline dnode_secno de_down_pointer (struct hpfs_dirent *de)
{
CHKCOND(de->down,("HPFS: de_down_pointer: !de->down\n"));
- return *(dnode_secno *) ((void *) de + de->length - 4);
+ return le32_to_cpu(*(dnode_secno *) ((void *) de + le16_to_cpu(de->length) - 4));
}
/* The first dir entry in a dnode */
@@ -127,41 +114,46 @@
static inline struct hpfs_dirent *dnode_end_de (struct dnode *dnode)
{
- CHKCOND(dnode->first_free>=0x14 && dnode->first_free<=0xa00,("HPFS: dnode_end_de: dnode->first_free = %d\n",(int)dnode->first_free));
- return (void *) dnode + dnode->first_free;
+ CHKCOND(le32_to_cpu(dnode->first_free)>=0x14 && le32_to_cpu(dnode->first_free)<=0xa00,("HPFS: dnode_end_de: dnode->first_free = %x\n",(unsigned)le32_to_cpu(dnode->first_free)));
+ return (void *) dnode + le32_to_cpu(dnode->first_free);
}
/* The dir entry after dir entry de */
static inline struct hpfs_dirent *de_next_de (struct hpfs_dirent *de)
{
- CHKCOND(de->length>=0x20 && de->length<0x800,("HPFS: de_next_de: de->length = %d\n",(int)de->length));
- return (void *) de + de->length;
+ CHKCOND(le16_to_cpu(de->length)>=0x20 && le16_to_cpu(de->length)<0x800,("HPFS: de_next_de: de->length = %x\n",(unsigned)le16_to_cpu(de->length)));
+ return (void *) de + le16_to_cpu(de->length);
}
static inline struct extended_attribute *fnode_ea(struct fnode *fnode)
{
- return (struct extended_attribute *)((char *)fnode + fnode->ea_offs + fnode->acl_size_s);
+ return (struct extended_attribute *)((char *)fnode + le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s));
}
static inline struct extended_attribute *fnode_end_ea(struct fnode *fnode)
{
- return (struct extended_attribute *)((char *)fnode + fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s);
+ return (struct extended_attribute *)((char *)fnode + le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s));
+}
+
+static unsigned ea_valuelen(struct extended_attribute *ea)
+{
+ return ea->valuelen_lo + 256 * ea->valuelen_hi;
}
static inline struct extended_attribute *next_ea(struct extended_attribute *ea)
{
- return (struct extended_attribute *)((char *)ea + 5 + ea->namelen + ea->valuelen);
+ return (struct extended_attribute *)((char *)ea + 5 + ea->namelen + ea_valuelen(ea));
}
static inline secno ea_sec(struct extended_attribute *ea)
{
- return *(secno *)((char *)ea + 9 + ea->namelen);
+ return le32_to_cpu(get_unaligned((secno *)((char *)ea + 9 + ea->namelen)));
}
static inline secno ea_len(struct extended_attribute *ea)
{
- return *(secno *)((char *)ea + 5 + ea->namelen);
+ return le32_to_cpu(get_unaligned((secno *)((char *)ea + 5 + ea->namelen)));
}
static inline char *ea_data(struct extended_attribute *ea)
@@ -186,13 +178,13 @@
dst->not_8x3 = n;
}
-static inline unsigned tstbits(unsigned *bmp, unsigned b, unsigned n)
+static inline unsigned tstbits(u32 *bmp, unsigned b, unsigned n)
{
int i;
if ((b >= 0x4000) || (b + n - 1 >= 0x4000)) return n;
- if (!((bmp[(b & 0x3fff) >> 5] >> (b & 0x1f)) & 1)) return 1;
+ if (!((le32_to_cpu(bmp[(b & 0x3fff) >> 5]) >> (b & 0x1f)) & 1)) return 1;
for (i = 1; i < n; i++)
- if (/*b+i < 0x4000 &&*/ !((bmp[((b+i) & 0x3fff) >> 5] >> ((b+i) & 0x1f)) & 1))
+ if (!((le32_to_cpu(bmp[((b+i) & 0x3fff) >> 5]) >> ((b+i) & 0x1f)) & 1))
return i + 1;
return 0;
}
@@ -200,12 +192,12 @@
/* alloc.c */
int hpfs_chk_sectors(struct super_block *, secno, int, char *);
-secno hpfs_alloc_sector(struct super_block *, secno, unsigned, int, int);
+secno hpfs_alloc_sector(struct super_block *, secno, unsigned, int);
int hpfs_alloc_if_possible(struct super_block *, secno);
void hpfs_free_sectors(struct super_block *, secno, unsigned);
int hpfs_check_free_dnodes(struct super_block *, int);
void hpfs_free_dnode(struct super_block *, secno);
-struct dnode *hpfs_alloc_dnode(struct super_block *, secno, dnode_secno *, struct quad_buffer_head *, int);
+struct dnode *hpfs_alloc_dnode(struct super_block *, secno, dnode_secno *, struct quad_buffer_head *);
struct fnode *hpfs_alloc_fnode(struct super_block *, secno, fnode_secno *, struct buffer_head **);
struct anode *hpfs_alloc_anode(struct super_block *, secno, anode_secno *, struct buffer_head **);
@@ -222,8 +214,6 @@
/* buffer.c */
-void hpfs_lock_creation(struct super_block *);
-void hpfs_unlock_creation(struct super_block *);
void *hpfs_map_sector(struct super_block *, unsigned, struct buffer_head **, int);
void *hpfs_get_sector(struct super_block *, unsigned, struct buffer_head **);
void *hpfs_map_4sectors(struct super_block *, unsigned, struct quad_buffer_head *, int);
@@ -247,7 +237,7 @@
struct hpfs_dirent *hpfs_add_de(struct super_block *, struct dnode *,
const unsigned char *, unsigned, secno);
int hpfs_add_dirent(struct inode *, const unsigned char *, unsigned,
- struct hpfs_dirent *, int);
+ struct hpfs_dirent *);
int hpfs_remove_dirent(struct inode *, dnode_secno, struct hpfs_dirent *, struct quad_buffer_head *, int);
void hpfs_count_dnodes(struct super_block *, dnode_secno, int *, int *, int *);
dnode_secno hpfs_de_as_down_as_possible(struct super_block *, dnode_secno dno);
@@ -303,7 +293,6 @@
const unsigned char *, unsigned, int);
int hpfs_is_name_long(const unsigned char *, unsigned);
void hpfs_adjust_length(const unsigned char *, unsigned *);
-void hpfs_decide_conv(struct inode *, const unsigned char *, unsigned);
/* namei.c */
@@ -346,21 +335,26 @@
/*
* Locking:
*
- * hpfs_lock() is a leftover from the big kernel lock.
- * Right now, these functions are empty and only left
- * for documentation purposes. The file system no longer
- * works on SMP systems, so the lock is not needed
- * any more.
+ * hpfs_lock() locks the whole filesystem. It must be taken
+ * on any method called by the VFS.
*
- * If someone is interested in making it work again, this
- * would be the place to start by adding a per-superblock
- * mutex and fixing all the bugs and performance issues
- * caused by that.
+ * We don't do any per-file locking anymore, it is hard to
+ * review and HPFS is not performance-sensitive anyway.
*/
static inline void hpfs_lock(struct super_block *s)
{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ mutex_lock(&sbi->hpfs_mutex);
}
static inline void hpfs_unlock(struct super_block *s)
{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ mutex_unlock(&sbi->hpfs_mutex);
+}
+
+static inline void hpfs_lock_assert(struct super_block *s)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ WARN_ON(!mutex_is_locked(&sbi->hpfs_mutex));
}
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 87f1f78..338cd83 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -17,7 +17,6 @@
i->i_uid = hpfs_sb(sb)->sb_uid;
i->i_gid = hpfs_sb(sb)->sb_gid;
i->i_mode = hpfs_sb(sb)->sb_mode;
- hpfs_inode->i_conv = hpfs_sb(sb)->sb_conv;
i->i_size = -1;
i->i_blocks = -1;
@@ -116,8 +115,8 @@
i->i_mode |= S_IFDIR;
i->i_op = &hpfs_dir_iops;
i->i_fop = &hpfs_dir_ops;
- hpfs_inode->i_parent_dir = fnode->up;
- hpfs_inode->i_dno = fnode->u.external[0].disk_secno;
+ hpfs_inode->i_parent_dir = le32_to_cpu(fnode->up);
+ hpfs_inode->i_dno = le32_to_cpu(fnode->u.external[0].disk_secno);
if (hpfs_sb(sb)->sb_chk >= 2) {
struct buffer_head *bh0;
if (hpfs_map_fnode(sb, hpfs_inode->i_parent_dir, &bh0)) brelse(bh0);
@@ -133,7 +132,7 @@
i->i_op = &hpfs_file_iops;
i->i_fop = &hpfs_file_ops;
i->i_nlink = 1;
- i->i_size = fnode->file_size;
+ i->i_size = le32_to_cpu(fnode->file_size);
i->i_blocks = ((i->i_size + 511) >> 9) + 1;
i->i_data.a_ops = &hpfs_aops;
hpfs_i(i)->mmu_private = i->i_size;
@@ -144,7 +143,7 @@
static void hpfs_write_inode_ea(struct inode *i, struct fnode *fnode)
{
struct hpfs_inode_info *hpfs_inode = hpfs_i(i);
- /*if (fnode->acl_size_l || fnode->acl_size_s) {
+ /*if (le32_to_cpu(fnode->acl_size_l) || le16_to_cpu(fnode->acl_size_s)) {
Some unknown structures like ACL may be in fnode,
we'd better not overwrite them
hpfs_error(i->i_sb, "fnode %08x has some unknown HPFS386 stuctures", i->i_ino);
@@ -187,9 +186,7 @@
kfree(hpfs_inode->i_rddir_off);
hpfs_inode->i_rddir_off = NULL;
}
- mutex_lock(&hpfs_inode->i_parent_mutex);
if (!i->i_nlink) {
- mutex_unlock(&hpfs_inode->i_parent_mutex);
return;
}
parent = iget_locked(i->i_sb, hpfs_inode->i_parent_dir);
@@ -200,14 +197,9 @@
hpfs_read_inode(parent);
unlock_new_inode(parent);
}
- mutex_lock(&hpfs_inode->i_mutex);
hpfs_write_inode_nolock(i);
- mutex_unlock(&hpfs_inode->i_mutex);
iput(parent);
- } else {
- mark_inode_dirty(i);
}
- mutex_unlock(&hpfs_inode->i_parent_mutex);
}
void hpfs_write_inode_nolock(struct inode *i)
@@ -226,30 +218,30 @@
}
} else de = NULL;
if (S_ISREG(i->i_mode)) {
- fnode->file_size = i->i_size;
- if (de) de->file_size = i->i_size;
+ fnode->file_size = cpu_to_le32(i->i_size);
+ if (de) de->file_size = cpu_to_le32(i->i_size);
} else if (S_ISDIR(i->i_mode)) {
- fnode->file_size = 0;
- if (de) de->file_size = 0;
+ fnode->file_size = cpu_to_le32(0);
+ if (de) de->file_size = cpu_to_le32(0);
}
hpfs_write_inode_ea(i, fnode);
if (de) {
- de->write_date = gmt_to_local(i->i_sb, i->i_mtime.tv_sec);
- de->read_date = gmt_to_local(i->i_sb, i->i_atime.tv_sec);
- de->creation_date = gmt_to_local(i->i_sb, i->i_ctime.tv_sec);
+ de->write_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_mtime.tv_sec));
+ de->read_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_atime.tv_sec));
+ de->creation_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_ctime.tv_sec));
de->read_only = !(i->i_mode & 0222);
- de->ea_size = hpfs_inode->i_ea_size;
+ de->ea_size = cpu_to_le32(hpfs_inode->i_ea_size);
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
}
if (S_ISDIR(i->i_mode)) {
if ((de = map_dirent(i, hpfs_inode->i_dno, "\001\001", 2, NULL, &qbh))) {
- de->write_date = gmt_to_local(i->i_sb, i->i_mtime.tv_sec);
- de->read_date = gmt_to_local(i->i_sb, i->i_atime.tv_sec);
- de->creation_date = gmt_to_local(i->i_sb, i->i_ctime.tv_sec);
+ de->write_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_mtime.tv_sec));
+ de->read_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_atime.tv_sec));
+ de->creation_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_ctime.tv_sec));
de->read_only = !(i->i_mode & 0222);
- de->ea_size = /*hpfs_inode->i_ea_size*/0;
- de->file_size = 0;
+ de->ea_size = cpu_to_le32(/*hpfs_inode->i_ea_size*/0);
+ de->file_size = cpu_to_le32(0);
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
} else
@@ -269,6 +261,10 @@
hpfs_lock(inode->i_sb);
if (inode->i_ino == hpfs_sb(inode->i_sb)->sb_root)
goto out_unlock;
+ if ((attr->ia_valid & ATTR_UID) && attr->ia_uid >= 0x10000)
+ goto out_unlock;
+ if ((attr->ia_valid & ATTR_GID) && attr->ia_gid >= 0x10000)
+ goto out_unlock;
if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size > inode->i_size)
goto out_unlock;
@@ -284,7 +280,6 @@
}
setattr_copy(inode, attr);
- mark_inode_dirty(inode);
hpfs_write_inode(inode);
diff --git a/fs/hpfs/map.c b/fs/hpfs/map.c
index 840d033..a790821 100644
--- a/fs/hpfs/map.c
+++ b/fs/hpfs/map.c
@@ -21,7 +21,7 @@
hpfs_error(s, "hpfs_map_bitmap called with bad parameter: %08x at %s", bmp_block, id);
return NULL;
}
- sec = hpfs_sb(s)->sb_bmp_dir[bmp_block];
+ sec = le32_to_cpu(hpfs_sb(s)->sb_bmp_dir[bmp_block]);
if (!sec || sec > hpfs_sb(s)->sb_fs_size-4) {
hpfs_error(s, "invalid bitmap block pointer %08x -> %08x at %s", bmp_block, sec, id);
return NULL;
@@ -46,18 +46,18 @@
struct code_page_data *cpd;
struct code_page_directory *cp = hpfs_map_sector(s, cps, &bh, 0);
if (!cp) return NULL;
- if (cp->magic != CP_DIR_MAGIC) {
- printk("HPFS: Code page directory magic doesn't match (magic = %08x)\n", cp->magic);
+ if (le32_to_cpu(cp->magic) != CP_DIR_MAGIC) {
+ printk("HPFS: Code page directory magic doesn't match (magic = %08x)\n", le32_to_cpu(cp->magic));
brelse(bh);
return NULL;
}
- if (!cp->n_code_pages) {
+ if (!le32_to_cpu(cp->n_code_pages)) {
printk("HPFS: n_code_pages == 0\n");
brelse(bh);
return NULL;
}
- cpds = cp->array[0].code_page_data;
- cpi = cp->array[0].index;
+ cpds = le32_to_cpu(cp->array[0].code_page_data);
+ cpi = le16_to_cpu(cp->array[0].index);
brelse(bh);
if (cpi >= 3) {
@@ -66,12 +66,12 @@
}
if (!(cpd = hpfs_map_sector(s, cpds, &bh, 0))) return NULL;
- if ((unsigned)cpd->offs[cpi] > 0x178) {
+ if (le16_to_cpu(cpd->offs[cpi]) > 0x178) {
printk("HPFS: Code page index out of sector\n");
brelse(bh);
return NULL;
}
- ptr = (unsigned char *)cpd + cpd->offs[cpi] + 6;
+ ptr = (unsigned char *)cpd + le16_to_cpu(cpd->offs[cpi]) + 6;
if (!(cp_table = kmalloc(256, GFP_KERNEL))) {
printk("HPFS: out of memory for code page table\n");
brelse(bh);
@@ -125,7 +125,7 @@
if (hpfs_sb(s)->sb_chk) {
struct extended_attribute *ea;
struct extended_attribute *ea_end;
- if (fnode->magic != FNODE_MAGIC) {
+ if (le32_to_cpu(fnode->magic) != FNODE_MAGIC) {
hpfs_error(s, "bad magic on fnode %08lx",
(unsigned long)ino);
goto bail;
@@ -138,7 +138,7 @@
(unsigned long)ino);
goto bail;
}
- if (fnode->btree.first_free !=
+ if (le16_to_cpu(fnode->btree.first_free) !=
8 + fnode->btree.n_used_nodes * (fnode->btree.internal ? 8 : 12)) {
hpfs_error(s,
"bad first_free pointer in fnode %08lx",
@@ -146,12 +146,12 @@
goto bail;
}
}
- if (fnode->ea_size_s && ((signed int)fnode->ea_offs < 0xc4 ||
- (signed int)fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s > 0x200)) {
+ if (le16_to_cpu(fnode->ea_size_s) && (le16_to_cpu(fnode->ea_offs) < 0xc4 ||
+ le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s) > 0x200)) {
hpfs_error(s,
"bad EA info in fnode %08lx: ea_offs == %04x ea_size_s == %04x",
(unsigned long)ino,
- fnode->ea_offs, fnode->ea_size_s);
+ le16_to_cpu(fnode->ea_offs), le16_to_cpu(fnode->ea_size_s));
goto bail;
}
ea = fnode_ea(fnode);
@@ -178,16 +178,20 @@
if (hpfs_sb(s)->sb_chk) if (hpfs_chk_sectors(s, ano, 1, "anode")) return NULL;
if ((anode = hpfs_map_sector(s, ano, bhp, ANODE_RD_AHEAD)))
if (hpfs_sb(s)->sb_chk) {
- if (anode->magic != ANODE_MAGIC || anode->self != ano) {
+ if (le32_to_cpu(anode->magic) != ANODE_MAGIC) {
hpfs_error(s, "bad magic on anode %08x", ano);
goto bail;
}
+ if (le32_to_cpu(anode->self) != ano) {
+ hpfs_error(s, "self pointer invalid on anode %08x", ano);
+ goto bail;
+ }
if ((unsigned)anode->btree.n_used_nodes + (unsigned)anode->btree.n_free_nodes !=
(anode->btree.internal ? 60 : 40)) {
hpfs_error(s, "bad number of nodes in anode %08x", ano);
goto bail;
}
- if (anode->btree.first_free !=
+ if (le16_to_cpu(anode->btree.first_free) !=
8 + anode->btree.n_used_nodes * (anode->btree.internal ? 8 : 12)) {
hpfs_error(s, "bad first_free pointer in anode %08x", ano);
goto bail;
@@ -219,26 +223,26 @@
unsigned p, pp = 0;
unsigned char *d = (unsigned char *)dnode;
int b = 0;
- if (dnode->magic != DNODE_MAGIC) {
+ if (le32_to_cpu(dnode->magic) != DNODE_MAGIC) {
hpfs_error(s, "bad magic on dnode %08x", secno);
goto bail;
}
- if (dnode->self != secno)
- hpfs_error(s, "bad self pointer on dnode %08x self = %08x", secno, dnode->self);
+ if (le32_to_cpu(dnode->self) != secno)
+ hpfs_error(s, "bad self pointer on dnode %08x self = %08x", secno, le32_to_cpu(dnode->self));
/* Check dirents - bad dirents would cause infinite
loops or shooting to memory */
- if (dnode->first_free > 2048/* || dnode->first_free < 84*/) {
- hpfs_error(s, "dnode %08x has first_free == %08x", secno, dnode->first_free);
+ if (le32_to_cpu(dnode->first_free) > 2048) {
+ hpfs_error(s, "dnode %08x has first_free == %08x", secno, le32_to_cpu(dnode->first_free));
goto bail;
}
- for (p = 20; p < dnode->first_free; p += d[p] + (d[p+1] << 8)) {
+ for (p = 20; p < le32_to_cpu(dnode->first_free); p += d[p] + (d[p+1] << 8)) {
struct hpfs_dirent *de = (struct hpfs_dirent *)((char *)dnode + p);
- if (de->length > 292 || (de->length < 32) || (de->length & 3) || p + de->length > 2048) {
+ if (le16_to_cpu(de->length) > 292 || (le16_to_cpu(de->length) < 32) || (le16_to_cpu(de->length) & 3) || p + le16_to_cpu(de->length) > 2048) {
hpfs_error(s, "bad dirent size in dnode %08x, dirent %03x, last %03x", secno, p, pp);
goto bail;
}
- if (((31 + de->namelen + de->down*4 + 3) & ~3) != de->length) {
- if (((31 + de->namelen + de->down*4 + 3) & ~3) < de->length && s->s_flags & MS_RDONLY) goto ok;
+ if (((31 + de->namelen + de->down*4 + 3) & ~3) != le16_to_cpu(de->length)) {
+ if (((31 + de->namelen + de->down*4 + 3) & ~3) < le16_to_cpu(de->length) && s->s_flags & MS_RDONLY) goto ok;
hpfs_error(s, "namelen does not match dirent size in dnode %08x, dirent %03x, last %03x", secno, p, pp);
goto bail;
}
@@ -251,7 +255,7 @@
pp = p;
}
- if (p != dnode->first_free) {
+ if (p != le32_to_cpu(dnode->first_free)) {
hpfs_error(s, "size on last dirent does not match first_free; dnode %08x", secno);
goto bail;
}
@@ -277,7 +281,7 @@
if (!fnode)
return 0;
- dno = fnode->u.external[0].disk_secno;
+ dno = le32_to_cpu(fnode->u.external[0].disk_secno);
brelse(bh);
return dno;
}
diff --git a/fs/hpfs/name.c b/fs/hpfs/name.c
index f24736d..9acdf33 100644
--- a/fs/hpfs/name.c
+++ b/fs/hpfs/name.c
@@ -8,39 +8,6 @@
#include "hpfs_fn.h"
-static const char *text_postfix[]={
-".ASM", ".BAS", ".BAT", ".C", ".CC", ".CFG", ".CMD", ".CON", ".CPP", ".DEF",
-".DOC", ".DPR", ".ERX", ".H", ".HPP", ".HTM", ".HTML", ".JAVA", ".LOG", ".PAS",
-".RC", ".TEX", ".TXT", ".Y", ""};
-
-static const char *text_prefix[]={
-"AUTOEXEC.", "CHANGES", "COPYING", "CONFIG.", "CREDITS", "FAQ", "FILE_ID.DIZ",
-"MAKEFILE", "READ.ME", "README", "TERMCAP", ""};
-
-void hpfs_decide_conv(struct inode *inode, const unsigned char *name, unsigned len)
-{
- struct hpfs_inode_info *hpfs_inode = hpfs_i(inode);
- int i;
- if (hpfs_inode->i_conv != CONV_AUTO) return;
- for (i = 0; *text_postfix[i]; i++) {
- int l = strlen(text_postfix[i]);
- if (l <= len)
- if (!hpfs_compare_names(inode->i_sb, text_postfix[i], l, name + len - l, l, 0))
- goto text;
- }
- for (i = 0; *text_prefix[i]; i++) {
- int l = strlen(text_prefix[i]);
- if (l <= len)
- if (!hpfs_compare_names(inode->i_sb, text_prefix[i], l, name, l, 0))
- goto text;
- }
- hpfs_inode->i_conv = CONV_BINARY;
- return;
- text:
- hpfs_inode->i_conv = CONV_TEXT;
- return;
-}
-
static inline int not_allowed_char(unsigned char c)
{
return c<' ' || c=='"' || c=='*' || c=='/' || c==':' || c=='<' ||
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index d5f8c8a..1f05839 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -29,7 +29,7 @@
fnode = hpfs_alloc_fnode(dir->i_sb, hpfs_i(dir)->i_dno, &fno, &bh);
if (!fnode)
goto bail;
- dnode = hpfs_alloc_dnode(dir->i_sb, fno, &dno, &qbh0, 1);
+ dnode = hpfs_alloc_dnode(dir->i_sb, fno, &dno, &qbh0);
if (!dnode)
goto bail1;
memset(&dee, 0, sizeof dee);
@@ -37,8 +37,8 @@
if (!(mode & 0222)) dee.read_only = 1;
/*dee.archive = 0;*/
dee.hidden = name[0] == '.';
- dee.fnode = fno;
- dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+ dee.fnode = cpu_to_le32(fno);
+ dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
result = new_inode(dir->i_sb);
if (!result)
goto bail2;
@@ -46,7 +46,7 @@
result->i_ino = fno;
hpfs_i(result)->i_parent_dir = dir->i_ino;
hpfs_i(result)->i_dno = dno;
- result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+ result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
result->i_ctime.tv_nsec = 0;
result->i_mtime.tv_nsec = 0;
result->i_atime.tv_nsec = 0;
@@ -60,8 +60,7 @@
if (dee.read_only)
result->i_mode &= ~0222;
- mutex_lock(&hpfs_i(dir)->i_mutex);
- r = hpfs_add_dirent(dir, name, len, &dee, 0);
+ r = hpfs_add_dirent(dir, name, len, &dee);
if (r == 1)
goto bail3;
if (r == -1) {
@@ -70,21 +69,21 @@
}
fnode->len = len;
memcpy(fnode->name, name, len > 15 ? 15 : len);
- fnode->up = dir->i_ino;
+ fnode->up = cpu_to_le32(dir->i_ino);
fnode->dirflag = 1;
fnode->btree.n_free_nodes = 7;
fnode->btree.n_used_nodes = 1;
- fnode->btree.first_free = 0x14;
- fnode->u.external[0].disk_secno = dno;
- fnode->u.external[0].file_secno = -1;
+ fnode->btree.first_free = cpu_to_le16(0x14);
+ fnode->u.external[0].disk_secno = cpu_to_le32(dno);
+ fnode->u.external[0].file_secno = cpu_to_le32(-1);
dnode->root_dnode = 1;
- dnode->up = fno;
+ dnode->up = cpu_to_le32(fno);
de = hpfs_add_de(dir->i_sb, dnode, "\001\001", 2, 0);
- de->creation_date = de->write_date = de->read_date = gmt_to_local(dir->i_sb, get_seconds());
+ de->creation_date = de->write_date = de->read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
if (!(mode & 0222)) de->read_only = 1;
de->first = de->directory = 1;
/*de->hidden = de->system = 0;*/
- de->fnode = fno;
+ de->fnode = cpu_to_le32(fno);
mark_buffer_dirty(bh);
brelse(bh);
hpfs_mark_4buffers_dirty(&qbh0);
@@ -101,11 +100,9 @@
hpfs_write_inode_nolock(result);
}
d_instantiate(dentry, result);
- mutex_unlock(&hpfs_i(dir)->i_mutex);
hpfs_unlock(dir->i_sb);
return 0;
bail3:
- mutex_unlock(&hpfs_i(dir)->i_mutex);
iput(result);
bail2:
hpfs_brelse4(&qbh0);
@@ -140,8 +137,8 @@
if (!(mode & 0222)) dee.read_only = 1;
dee.archive = 1;
dee.hidden = name[0] == '.';
- dee.fnode = fno;
- dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+ dee.fnode = cpu_to_le32(fno);
+ dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
result = new_inode(dir->i_sb);
if (!result)
@@ -154,9 +151,8 @@
result->i_op = &hpfs_file_iops;
result->i_fop = &hpfs_file_ops;
result->i_nlink = 1;
- hpfs_decide_conv(result, name, len);
hpfs_i(result)->i_parent_dir = dir->i_ino;
- result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+ result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
result->i_ctime.tv_nsec = 0;
result->i_mtime.tv_nsec = 0;
result->i_atime.tv_nsec = 0;
@@ -168,8 +164,7 @@
result->i_data.a_ops = &hpfs_aops;
hpfs_i(result)->mmu_private = 0;
- mutex_lock(&hpfs_i(dir)->i_mutex);
- r = hpfs_add_dirent(dir, name, len, &dee, 0);
+ r = hpfs_add_dirent(dir, name, len, &dee);
if (r == 1)
goto bail2;
if (r == -1) {
@@ -178,7 +173,7 @@
}
fnode->len = len;
memcpy(fnode->name, name, len > 15 ? 15 : len);
- fnode->up = dir->i_ino;
+ fnode->up = cpu_to_le32(dir->i_ino);
mark_buffer_dirty(bh);
brelse(bh);
@@ -193,12 +188,10 @@
hpfs_write_inode_nolock(result);
}
d_instantiate(dentry, result);
- mutex_unlock(&hpfs_i(dir)->i_mutex);
hpfs_unlock(dir->i_sb);
return 0;
bail2:
- mutex_unlock(&hpfs_i(dir)->i_mutex);
iput(result);
bail1:
brelse(bh);
@@ -232,8 +225,8 @@
if (!(mode & 0222)) dee.read_only = 1;
dee.archive = 1;
dee.hidden = name[0] == '.';
- dee.fnode = fno;
- dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+ dee.fnode = cpu_to_le32(fno);
+ dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
result = new_inode(dir->i_sb);
if (!result)
@@ -242,7 +235,7 @@
hpfs_init_inode(result);
result->i_ino = fno;
hpfs_i(result)->i_parent_dir = dir->i_ino;
- result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+ result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
result->i_ctime.tv_nsec = 0;
result->i_mtime.tv_nsec = 0;
result->i_atime.tv_nsec = 0;
@@ -254,8 +247,7 @@
result->i_blocks = 1;
init_special_inode(result, mode, rdev);
- mutex_lock(&hpfs_i(dir)->i_mutex);
- r = hpfs_add_dirent(dir, name, len, &dee, 0);
+ r = hpfs_add_dirent(dir, name, len, &dee);
if (r == 1)
goto bail2;
if (r == -1) {
@@ -264,19 +256,17 @@
}
fnode->len = len;
memcpy(fnode->name, name, len > 15 ? 15 : len);
- fnode->up = dir->i_ino;
+ fnode->up = cpu_to_le32(dir->i_ino);
mark_buffer_dirty(bh);
insert_inode_hash(result);
hpfs_write_inode_nolock(result);
d_instantiate(dentry, result);
- mutex_unlock(&hpfs_i(dir)->i_mutex);
brelse(bh);
hpfs_unlock(dir->i_sb);
return 0;
bail2:
- mutex_unlock(&hpfs_i(dir)->i_mutex);
iput(result);
bail1:
brelse(bh);
@@ -310,8 +300,8 @@
memset(&dee, 0, sizeof dee);
dee.archive = 1;
dee.hidden = name[0] == '.';
- dee.fnode = fno;
- dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+ dee.fnode = cpu_to_le32(fno);
+ dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
result = new_inode(dir->i_sb);
if (!result)
@@ -319,7 +309,7 @@
result->i_ino = fno;
hpfs_init_inode(result);
hpfs_i(result)->i_parent_dir = dir->i_ino;
- result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+ result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
result->i_ctime.tv_nsec = 0;
result->i_mtime.tv_nsec = 0;
result->i_atime.tv_nsec = 0;
@@ -333,8 +323,7 @@
result->i_op = &page_symlink_inode_operations;
result->i_data.a_ops = &hpfs_symlink_aops;
- mutex_lock(&hpfs_i(dir)->i_mutex);
- r = hpfs_add_dirent(dir, name, len, &dee, 0);
+ r = hpfs_add_dirent(dir, name, len, &dee);
if (r == 1)
goto bail2;
if (r == -1) {
@@ -343,7 +332,7 @@
}
fnode->len = len;
memcpy(fnode->name, name, len > 15 ? 15 : len);
- fnode->up = dir->i_ino;
+ fnode->up = cpu_to_le32(dir->i_ino);
hpfs_set_ea(result, fnode, "SYMLINK", symlink, strlen(symlink));
mark_buffer_dirty(bh);
brelse(bh);
@@ -352,11 +341,9 @@
hpfs_write_inode_nolock(result);
d_instantiate(dentry, result);
- mutex_unlock(&hpfs_i(dir)->i_mutex);
hpfs_unlock(dir->i_sb);
return 0;
bail2:
- mutex_unlock(&hpfs_i(dir)->i_mutex);
iput(result);
bail1:
brelse(bh);
@@ -374,7 +361,6 @@
struct hpfs_dirent *de;
struct inode *inode = dentry->d_inode;
dnode_secno dno;
- fnode_secno fno;
int r;
int rep = 0;
int err;
@@ -382,8 +368,6 @@
hpfs_lock(dir->i_sb);
hpfs_adjust_length(name, &len);
again:
- mutex_lock(&hpfs_i(inode)->i_parent_mutex);
- mutex_lock(&hpfs_i(dir)->i_mutex);
err = -ENOENT;
de = map_dirent(dir, hpfs_i(dir)->i_dno, name, len, &dno, &qbh);
if (!de)
@@ -397,7 +381,6 @@
if (de->directory)
goto out1;
- fno = de->fnode;
r = hpfs_remove_dirent(dir, dno, de, &qbh, 1);
switch (r) {
case 1:
@@ -410,8 +393,6 @@
if (rep++)
break;
- mutex_unlock(&hpfs_i(dir)->i_mutex);
- mutex_unlock(&hpfs_i(inode)->i_parent_mutex);
dentry_unhash(dentry);
if (!d_unhashed(dentry)) {
dput(dentry);
@@ -445,8 +426,6 @@
out1:
hpfs_brelse4(&qbh);
out:
- mutex_unlock(&hpfs_i(dir)->i_mutex);
- mutex_unlock(&hpfs_i(inode)->i_parent_mutex);
hpfs_unlock(dir->i_sb);
return err;
}
@@ -459,15 +438,12 @@
struct hpfs_dirent *de;
struct inode *inode = dentry->d_inode;
dnode_secno dno;
- fnode_secno fno;
int n_items = 0;
int err;
int r;
hpfs_adjust_length(name, &len);
hpfs_lock(dir->i_sb);
- mutex_lock(&hpfs_i(inode)->i_parent_mutex);
- mutex_lock(&hpfs_i(dir)->i_mutex);
err = -ENOENT;
de = map_dirent(dir, hpfs_i(dir)->i_dno, name, len, &dno, &qbh);
if (!de)
@@ -486,7 +462,6 @@
if (n_items)
goto out1;
- fno = de->fnode;
r = hpfs_remove_dirent(dir, dno, de, &qbh, 1);
switch (r) {
case 1:
@@ -505,8 +480,6 @@
out1:
hpfs_brelse4(&qbh);
out:
- mutex_unlock(&hpfs_i(dir)->i_mutex);
- mutex_unlock(&hpfs_i(inode)->i_parent_mutex);
hpfs_unlock(dir->i_sb);
return err;
}
@@ -568,12 +541,6 @@
hpfs_lock(i->i_sb);
/* order doesn't matter, due to VFS exclusion */
- mutex_lock(&hpfs_i(i)->i_parent_mutex);
- if (new_inode)
- mutex_lock(&hpfs_i(new_inode)->i_parent_mutex);
- mutex_lock(&hpfs_i(old_dir)->i_mutex);
- if (new_dir != old_dir)
- mutex_lock(&hpfs_i(new_dir)->i_mutex);
/* Erm? Moving over the empty non-busy directory is perfectly legal */
if (new_inode && S_ISDIR(new_inode->i_mode)) {
@@ -610,9 +577,7 @@
if (new_dir == old_dir) hpfs_brelse4(&qbh);
- hpfs_lock_creation(i->i_sb);
- if ((r = hpfs_add_dirent(new_dir, new_name, new_len, &de, 1))) {
- hpfs_unlock_creation(i->i_sb);
+ if ((r = hpfs_add_dirent(new_dir, new_name, new_len, &de))) {
if (r == -1) hpfs_error(new_dir->i_sb, "hpfs_rename: dirent already exists!");
err = r == 1 ? -ENOSPC : -EFSERROR;
if (new_dir != old_dir) hpfs_brelse4(&qbh);
@@ -621,20 +586,17 @@
if (new_dir == old_dir)
if (!(dep = map_dirent(old_dir, hpfs_i(old_dir)->i_dno, old_name, old_len, &dno, &qbh))) {
- hpfs_unlock_creation(i->i_sb);
hpfs_error(i->i_sb, "lookup succeeded but map dirent failed at #2");
err = -ENOENT;
goto end1;
}
if ((r = hpfs_remove_dirent(old_dir, dno, dep, &qbh, 0))) {
- hpfs_unlock_creation(i->i_sb);
hpfs_error(i->i_sb, "hpfs_rename: could not remove dirent");
err = r == 2 ? -ENOSPC : -EFSERROR;
goto end1;
}
- hpfs_unlock_creation(i->i_sb);
-
+
end:
hpfs_i(i)->i_parent_dir = new_dir->i_ino;
if (S_ISDIR(i->i_mode)) {
@@ -642,22 +604,14 @@
drop_nlink(old_dir);
}
if ((fnode = hpfs_map_fnode(i->i_sb, i->i_ino, &bh))) {
- fnode->up = new_dir->i_ino;
+ fnode->up = cpu_to_le32(new_dir->i_ino);
fnode->len = new_len;
memcpy(fnode->name, new_name, new_len>15?15:new_len);
if (new_len < 15) memset(&fnode->name[new_len], 0, 15 - new_len);
mark_buffer_dirty(bh);
brelse(bh);
}
- hpfs_i(i)->i_conv = hpfs_sb(i->i_sb)->sb_conv;
- hpfs_decide_conv(i, new_name, new_len);
end1:
- if (old_dir != new_dir)
- mutex_unlock(&hpfs_i(new_dir)->i_mutex);
- mutex_unlock(&hpfs_i(old_dir)->i_mutex);
- mutex_unlock(&hpfs_i(i)->i_parent_mutex);
- if (new_inode)
- mutex_unlock(&hpfs_i(new_inode)->i_parent_mutex);
hpfs_unlock(i->i_sb);
return err;
}
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index c89b408..98580a3 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -18,15 +18,16 @@
/* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
-static void mark_dirty(struct super_block *s)
+static void mark_dirty(struct super_block *s, int remount)
{
- if (hpfs_sb(s)->sb_chkdsk && !(s->s_flags & MS_RDONLY)) {
+ if (hpfs_sb(s)->sb_chkdsk && (remount || !(s->s_flags & MS_RDONLY))) {
struct buffer_head *bh;
struct hpfs_spare_block *sb;
if ((sb = hpfs_map_sector(s, 17, &bh, 0))) {
sb->dirty = 1;
sb->old_wrote = 0;
mark_buffer_dirty(bh);
+ sync_dirty_buffer(bh);
brelse(bh);
}
}
@@ -40,10 +41,12 @@
struct buffer_head *bh;
struct hpfs_spare_block *sb;
if (s->s_flags & MS_RDONLY) return;
+ sync_blockdev(s->s_bdev);
if ((sb = hpfs_map_sector(s, 17, &bh, 0))) {
sb->dirty = hpfs_sb(s)->sb_chkdsk > 1 - hpfs_sb(s)->sb_was_error;
sb->old_wrote = hpfs_sb(s)->sb_chkdsk >= 2 && !hpfs_sb(s)->sb_was_error;
mark_buffer_dirty(bh);
+ sync_dirty_buffer(bh);
brelse(bh);
}
}
@@ -63,13 +66,13 @@
if (!hpfs_sb(s)->sb_was_error) {
if (hpfs_sb(s)->sb_err == 2) {
printk("; crashing the system because you wanted it\n");
- mark_dirty(s);
+ mark_dirty(s, 0);
panic("HPFS panic");
} else if (hpfs_sb(s)->sb_err == 1) {
if (s->s_flags & MS_RDONLY) printk("; already mounted read-only\n");
else {
printk("; remounting read-only\n");
- mark_dirty(s);
+ mark_dirty(s, 0);
s->s_flags |= MS_RDONLY;
}
} else if (s->s_flags & MS_RDONLY) printk("; going on - but anything won't be destroyed because it's read-only\n");
@@ -102,9 +105,12 @@
{
struct hpfs_sb_info *sbi = hpfs_sb(s);
+ hpfs_lock(s);
+ unmark_dirty(s);
+ hpfs_unlock(s);
+
kfree(sbi->sb_cp_table);
kfree(sbi->sb_bmp_dir);
- unmark_dirty(s);
s->s_fs_info = NULL;
kfree(sbi);
}
@@ -129,7 +135,7 @@
n_bands = (hpfs_sb(s)->sb_fs_size + 0x3fff) >> 14;
count = 0;
for (n = 0; n < n_bands; n++)
- count += hpfs_count_one_bitmap(s, hpfs_sb(s)->sb_bmp_dir[n]);
+ count += hpfs_count_one_bitmap(s, le32_to_cpu(hpfs_sb(s)->sb_bmp_dir[n]));
return count;
}
@@ -188,8 +194,6 @@
{
struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo;
- mutex_init(&ei->i_mutex);
- mutex_init(&ei->i_parent_mutex);
inode_init_once(&ei->vfs_inode);
}
@@ -218,7 +222,6 @@
enum {
Opt_help, Opt_uid, Opt_gid, Opt_umask, Opt_case_lower, Opt_case_asis,
- Opt_conv_binary, Opt_conv_text, Opt_conv_auto,
Opt_check_none, Opt_check_normal, Opt_check_strict,
Opt_err_cont, Opt_err_ro, Opt_err_panic,
Opt_eas_no, Opt_eas_ro, Opt_eas_rw,
@@ -233,9 +236,6 @@
{Opt_umask, "umask=%o"},
{Opt_case_lower, "case=lower"},
{Opt_case_asis, "case=asis"},
- {Opt_conv_binary, "conv=binary"},
- {Opt_conv_text, "conv=text"},
- {Opt_conv_auto, "conv=auto"},
{Opt_check_none, "check=none"},
{Opt_check_normal, "check=normal"},
{Opt_check_strict, "check=strict"},
@@ -253,7 +253,7 @@
};
static int parse_opts(char *opts, uid_t *uid, gid_t *gid, umode_t *umask,
- int *lowercase, int *conv, int *eas, int *chk, int *errs,
+ int *lowercase, int *eas, int *chk, int *errs,
int *chkdsk, int *timeshift)
{
char *p;
@@ -295,15 +295,6 @@
case Opt_case_asis:
*lowercase = 0;
break;
- case Opt_conv_binary:
- *conv = CONV_BINARY;
- break;
- case Opt_conv_text:
- *conv = CONV_TEXT;
- break;
- case Opt_conv_auto:
- *conv = CONV_AUTO;
- break;
case Opt_check_none:
*chk = 0;
break;
@@ -370,9 +361,6 @@
umask=xxx set mode of files that don't have mode specified in eas\n\
case=lower lowercase all files\n\
case=asis do not lowercase files (default)\n\
- conv=binary do not convert CR/LF -> LF (default)\n\
- conv=auto convert only files with known text extensions\n\
- conv=text convert all files\n\
check=none no fs checks - kernel may crash on corrupted filesystem\n\
check=normal do some checks - it should not crash (default)\n\
check=strict do extra time-consuming checks, used for debugging\n\
@@ -394,7 +382,7 @@
uid_t uid;
gid_t gid;
umode_t umask;
- int lowercase, conv, eas, chk, errs, chkdsk, timeshift;
+ int lowercase, eas, chk, errs, chkdsk, timeshift;
int o;
struct hpfs_sb_info *sbi = hpfs_sb(s);
char *new_opts = kstrdup(data, GFP_KERNEL);
@@ -405,11 +393,11 @@
lock_super(s);
uid = sbi->sb_uid; gid = sbi->sb_gid;
umask = 0777 & ~sbi->sb_mode;
- lowercase = sbi->sb_lowercase; conv = sbi->sb_conv;
+ lowercase = sbi->sb_lowercase;
eas = sbi->sb_eas; chk = sbi->sb_chk; chkdsk = sbi->sb_chkdsk;
errs = sbi->sb_err; timeshift = sbi->sb_timeshift;
- if (!(o = parse_opts(data, &uid, &gid, &umask, &lowercase, &conv,
+ if (!(o = parse_opts(data, &uid, &gid, &umask, &lowercase,
&eas, &chk, &errs, &chkdsk, ×hift))) {
printk("HPFS: bad mount options.\n");
goto out_err;
@@ -427,11 +415,11 @@
sbi->sb_uid = uid; sbi->sb_gid = gid;
sbi->sb_mode = 0777 & ~umask;
- sbi->sb_lowercase = lowercase; sbi->sb_conv = conv;
+ sbi->sb_lowercase = lowercase;
sbi->sb_eas = eas; sbi->sb_chk = chk; sbi->sb_chkdsk = chkdsk;
sbi->sb_err = errs; sbi->sb_timeshift = timeshift;
- if (!(*flags & MS_RDONLY)) mark_dirty(s);
+ if (!(*flags & MS_RDONLY)) mark_dirty(s, 1);
replace_mount_options(s, new_opts);
@@ -471,7 +459,7 @@
uid_t uid;
gid_t gid;
umode_t umask;
- int lowercase, conv, eas, chk, errs, chkdsk, timeshift;
+ int lowercase, eas, chk, errs, chkdsk, timeshift;
dnode_secno root_dno;
struct hpfs_dirent *de = NULL;
@@ -479,11 +467,6 @@
int o;
- if (num_possible_cpus() > 1) {
- printk(KERN_ERR "HPFS is not SMP safe\n");
- return -EINVAL;
- }
-
save_mount_options(s, options);
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
@@ -495,20 +478,20 @@
sbi->sb_bmp_dir = NULL;
sbi->sb_cp_table = NULL;
- mutex_init(&sbi->hpfs_creation_de);
+ mutex_init(&sbi->hpfs_mutex);
+ hpfs_lock(s);
uid = current_uid();
gid = current_gid();
umask = current_umask();
lowercase = 0;
- conv = CONV_BINARY;
eas = 2;
chk = 1;
errs = 1;
chkdsk = 1;
timeshift = 0;
- if (!(o = parse_opts(options, &uid, &gid, &umask, &lowercase, &conv,
+ if (!(o = parse_opts(options, &uid, &gid, &umask, &lowercase,
&eas, &chk, &errs, &chkdsk, ×hift))) {
printk("HPFS: bad mount options.\n");
goto bail0;
@@ -526,9 +509,9 @@
if (!(spareblock = hpfs_map_sector(s, 17, &bh2, 0))) goto bail3;
/* Check magics */
- if (/*bootblock->magic != BB_MAGIC
- ||*/ superblock->magic != SB_MAGIC
- || spareblock->magic != SP_MAGIC) {
+ if (/*le16_to_cpu(bootblock->magic) != BB_MAGIC
+ ||*/ le32_to_cpu(superblock->magic) != SB_MAGIC
+ || le32_to_cpu(spareblock->magic) != SP_MAGIC) {
if (!silent) printk("HPFS: Bad magic ... probably not HPFS\n");
goto bail4;
}
@@ -549,19 +532,18 @@
s->s_op = &hpfs_sops;
s->s_d_op = &hpfs_dentry_operations;
- sbi->sb_root = superblock->root;
- sbi->sb_fs_size = superblock->n_sectors;
- sbi->sb_bitmaps = superblock->bitmaps;
- sbi->sb_dirband_start = superblock->dir_band_start;
- sbi->sb_dirband_size = superblock->n_dir_band;
- sbi->sb_dmap = superblock->dir_band_bitmap;
+ sbi->sb_root = le32_to_cpu(superblock->root);
+ sbi->sb_fs_size = le32_to_cpu(superblock->n_sectors);
+ sbi->sb_bitmaps = le32_to_cpu(superblock->bitmaps);
+ sbi->sb_dirband_start = le32_to_cpu(superblock->dir_band_start);
+ sbi->sb_dirband_size = le32_to_cpu(superblock->n_dir_band);
+ sbi->sb_dmap = le32_to_cpu(superblock->dir_band_bitmap);
sbi->sb_uid = uid;
sbi->sb_gid = gid;
sbi->sb_mode = 0777 & ~umask;
sbi->sb_n_free = -1;
sbi->sb_n_free_dnodes = -1;
sbi->sb_lowercase = lowercase;
- sbi->sb_conv = conv;
sbi->sb_eas = eas;
sbi->sb_chk = chk;
sbi->sb_chkdsk = chkdsk;
@@ -573,7 +555,7 @@
sbi->sb_max_fwd_alloc = 0xffffff;
/* Load bitmap directory */
- if (!(sbi->sb_bmp_dir = hpfs_load_bitmap_directory(s, superblock->bitmaps)))
+ if (!(sbi->sb_bmp_dir = hpfs_load_bitmap_directory(s, le32_to_cpu(superblock->bitmaps))))
goto bail4;
/* Check for general fs errors*/
@@ -591,20 +573,20 @@
mark_buffer_dirty(bh2);
}
- if (spareblock->hotfixes_used || spareblock->n_spares_used) {
+ if (le32_to_cpu(spareblock->hotfixes_used) || le32_to_cpu(spareblock->n_spares_used)) {
if (errs >= 2) {
printk("HPFS: Hotfixes not supported here, try chkdsk\n");
- mark_dirty(s);
+ mark_dirty(s, 0);
goto bail4;
}
hpfs_error(s, "hotfixes not supported here, try chkdsk");
if (errs == 0) printk("HPFS: Proceeding, but your filesystem will be probably corrupted by this driver...\n");
else printk("HPFS: This driver may read bad files or crash when operating on disk with hotfixes.\n");
}
- if (spareblock->n_dnode_spares != spareblock->n_dnode_spares_free) {
+ if (le32_to_cpu(spareblock->n_dnode_spares) != le32_to_cpu(spareblock->n_dnode_spares_free)) {
if (errs >= 2) {
printk("HPFS: Spare dnodes used, try chkdsk\n");
- mark_dirty(s);
+ mark_dirty(s, 0);
goto bail4;
}
hpfs_error(s, "warning: spare dnodes used, try chkdsk");
@@ -612,26 +594,26 @@
}
if (chk) {
unsigned a;
- if (superblock->dir_band_end - superblock->dir_band_start + 1 != superblock->n_dir_band ||
- superblock->dir_band_end < superblock->dir_band_start || superblock->n_dir_band > 0x4000) {
+ if (le32_to_cpu(superblock->dir_band_end) - le32_to_cpu(superblock->dir_band_start) + 1 != le32_to_cpu(superblock->n_dir_band) ||
+ le32_to_cpu(superblock->dir_band_end) < le32_to_cpu(superblock->dir_band_start) || le32_to_cpu(superblock->n_dir_band) > 0x4000) {
hpfs_error(s, "dir band size mismatch: dir_band_start==%08x, dir_band_end==%08x, n_dir_band==%08x",
- superblock->dir_band_start, superblock->dir_band_end, superblock->n_dir_band);
+ le32_to_cpu(superblock->dir_band_start), le32_to_cpu(superblock->dir_band_end), le32_to_cpu(superblock->n_dir_band));
goto bail4;
}
a = sbi->sb_dirband_size;
sbi->sb_dirband_size = 0;
- if (hpfs_chk_sectors(s, superblock->dir_band_start, superblock->n_dir_band, "dir_band") ||
- hpfs_chk_sectors(s, superblock->dir_band_bitmap, 4, "dir_band_bitmap") ||
- hpfs_chk_sectors(s, superblock->bitmaps, 4, "bitmaps")) {
- mark_dirty(s);
+ if (hpfs_chk_sectors(s, le32_to_cpu(superblock->dir_band_start), le32_to_cpu(superblock->n_dir_band), "dir_band") ||
+ hpfs_chk_sectors(s, le32_to_cpu(superblock->dir_band_bitmap), 4, "dir_band_bitmap") ||
+ hpfs_chk_sectors(s, le32_to_cpu(superblock->bitmaps), 4, "bitmaps")) {
+ mark_dirty(s, 0);
goto bail4;
}
sbi->sb_dirband_size = a;
} else printk("HPFS: You really don't want any checks? You are crazy...\n");
/* Load code page table */
- if (spareblock->n_code_pages)
- if (!(sbi->sb_cp_table = hpfs_load_code_page(s, spareblock->code_page_dir)))
+ if (le32_to_cpu(spareblock->n_code_pages))
+ if (!(sbi->sb_cp_table = hpfs_load_code_page(s, le32_to_cpu(spareblock->code_page_dir))))
printk("HPFS: Warning: code page support is disabled\n");
brelse(bh2);
@@ -660,13 +642,13 @@
if (!de)
hpfs_error(s, "unable to find root dir");
else {
- root->i_atime.tv_sec = local_to_gmt(s, de->read_date);
+ root->i_atime.tv_sec = local_to_gmt(s, le32_to_cpu(de->read_date));
root->i_atime.tv_nsec = 0;
- root->i_mtime.tv_sec = local_to_gmt(s, de->write_date);
+ root->i_mtime.tv_sec = local_to_gmt(s, le32_to_cpu(de->write_date));
root->i_mtime.tv_nsec = 0;
- root->i_ctime.tv_sec = local_to_gmt(s, de->creation_date);
+ root->i_ctime.tv_sec = local_to_gmt(s, le32_to_cpu(de->creation_date));
root->i_ctime.tv_nsec = 0;
- hpfs_i(root)->i_ea_size = de->ea_size;
+ hpfs_i(root)->i_ea_size = le16_to_cpu(de->ea_size);
hpfs_i(root)->i_parent_dir = root->i_ino;
if (root->i_size == -1)
root->i_size = 2048;
@@ -674,6 +656,7 @@
root->i_blocks = 5;
hpfs_brelse4(&qbh);
}
+ hpfs_unlock(s);
return 0;
bail4: brelse(bh2);
@@ -681,6 +664,7 @@
bail2: brelse(bh0);
bail1:
bail0:
+ hpfs_unlock(s);
kfree(sbi->sb_bmp_dir);
kfree(sbi->sb_cp_table);
s->s_fs_info = NULL;
diff --git a/fs/inode.c b/fs/inode.c
index 33c963d..05f4fa5 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -24,6 +24,7 @@
#include <linux/mount.h>
#include <linux/async.h>
#include <linux/posix_acl.h>
+#include <linux/prefetch.h>
#include <linux/ima.h>
#include <linux/cred.h>
#include "internal.h"
diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c
index 1adc8d4..df0de27 100644
--- a/fs/logfs/dev_bdev.c
+++ b/fs/logfs/dev_bdev.c
@@ -10,6 +10,7 @@
#include <linux/blkdev.h>
#include <linux/buffer_head.h>
#include <linux/gfp.h>
+#include <linux/prefetch.h>
#define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1))
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index 33435e4..ce03a18 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -480,10 +480,6 @@
!read_only)
return -EIO;
- mutex_init(&super->s_dirop_mutex);
- mutex_init(&super->s_object_alias_mutex);
- INIT_LIST_HEAD(&super->s_freeing_list);
-
ret = logfs_init_rw(sb);
if (ret)
return ret;
@@ -601,6 +597,10 @@
if (!super)
return ERR_PTR(-ENOMEM);
+ mutex_init(&super->s_dirop_mutex);
+ mutex_init(&super->s_object_alias_mutex);
+ INIT_LIST_HEAD(&super->s_freeing_list);
+
if (!devname)
err = logfs_get_sb_bdev(super, type, devname);
else if (strncmp(devname, "mtd", 3))
diff --git a/fs/namei.c b/fs/namei.c
index 54fc993..6ff858c 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -179,7 +179,7 @@
static int acl_permission_check(struct inode *inode, int mask, unsigned int flags,
int (*check_acl)(struct inode *inode, int mask, unsigned int flags))
{
- umode_t mode = inode->i_mode;
+ unsigned int mode = inode->i_mode;
mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
@@ -1378,12 +1378,12 @@
{
int res;
- BUG_ON(nd->depth >= MAX_NESTED_LINKS);
if (unlikely(current->link_count >= MAX_NESTED_LINKS)) {
path_put_conditional(path, nd);
path_put(&nd->path);
return -ELOOP;
}
+ BUG_ON(nd->depth >= MAX_NESTED_LINKS);
nd->depth++;
current->link_count++;
diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c
index 6f8192f..be79dc9 100644
--- a/fs/nfs/nfs4filelayout.c
+++ b/fs/nfs/nfs4filelayout.c
@@ -117,6 +117,8 @@
case -EKEYEXPIRED:
rpc_delay(task, FILELAYOUT_POLL_RETRY_MAX);
break;
+ case -NFS4ERR_RETRY_UNCACHED_REP:
+ break;
default:
dprintk("%s DS error. Retry through MDS %d\n", __func__,
task->tk_status);
@@ -416,7 +418,8 @@
filelayout_check_layout(struct pnfs_layout_hdr *lo,
struct nfs4_filelayout_segment *fl,
struct nfs4_layoutget_res *lgr,
- struct nfs4_deviceid *id)
+ struct nfs4_deviceid *id,
+ gfp_t gfp_flags)
{
struct nfs4_file_layout_dsaddr *dsaddr;
int status = -EINVAL;
@@ -439,7 +442,7 @@
/* find and reference the deviceid */
dsaddr = nfs4_fl_find_get_deviceid(id);
if (dsaddr == NULL) {
- dsaddr = get_device_info(lo->plh_inode, id);
+ dsaddr = get_device_info(lo->plh_inode, id, gfp_flags);
if (dsaddr == NULL)
goto out;
}
@@ -500,7 +503,8 @@
filelayout_decode_layout(struct pnfs_layout_hdr *flo,
struct nfs4_filelayout_segment *fl,
struct nfs4_layoutget_res *lgr,
- struct nfs4_deviceid *id)
+ struct nfs4_deviceid *id,
+ gfp_t gfp_flags)
{
struct xdr_stream stream;
struct xdr_buf buf = {
@@ -516,7 +520,7 @@
dprintk("%s: set_layout_map Begin\n", __func__);
- scratch = alloc_page(GFP_KERNEL);
+ scratch = alloc_page(gfp_flags);
if (!scratch)
return -ENOMEM;
@@ -554,13 +558,13 @@
goto out_err;
fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *),
- GFP_KERNEL);
+ gfp_flags);
if (!fl->fh_array)
goto out_err;
for (i = 0; i < fl->num_fh; i++) {
/* Do we want to use a mempool here? */
- fl->fh_array[i] = kmalloc(sizeof(struct nfs_fh), GFP_KERNEL);
+ fl->fh_array[i] = kmalloc(sizeof(struct nfs_fh), gfp_flags);
if (!fl->fh_array[i])
goto out_err_free;
@@ -605,19 +609,20 @@
static struct pnfs_layout_segment *
filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid,
- struct nfs4_layoutget_res *lgr)
+ struct nfs4_layoutget_res *lgr,
+ gfp_t gfp_flags)
{
struct nfs4_filelayout_segment *fl;
int rc;
struct nfs4_deviceid id;
dprintk("--> %s\n", __func__);
- fl = kzalloc(sizeof(*fl), GFP_KERNEL);
+ fl = kzalloc(sizeof(*fl), gfp_flags);
if (!fl)
return NULL;
- rc = filelayout_decode_layout(layoutid, fl, lgr, &id);
- if (rc != 0 || filelayout_check_layout(layoutid, fl, lgr, &id)) {
+ rc = filelayout_decode_layout(layoutid, fl, lgr, &id, gfp_flags);
+ if (rc != 0 || filelayout_check_layout(layoutid, fl, lgr, &id, gfp_flags)) {
_filelayout_free_lseg(fl);
return NULL;
}
@@ -633,7 +638,7 @@
int size = (fl->stripe_type == STRIPE_SPARSE) ?
fl->dsaddr->ds_num : fl->dsaddr->stripe_count;
- fl->commit_buckets = kcalloc(size, sizeof(struct list_head), GFP_KERNEL);
+ fl->commit_buckets = kcalloc(size, sizeof(struct list_head), gfp_flags);
if (!fl->commit_buckets) {
filelayout_free_lseg(&fl->generic_hdr);
return NULL;
diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h
index 7c44579..2b461d7 100644
--- a/fs/nfs/nfs4filelayout.h
+++ b/fs/nfs/nfs4filelayout.h
@@ -104,6 +104,6 @@
nfs4_fl_find_get_deviceid(struct nfs4_deviceid *dev_id);
extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr);
struct nfs4_file_layout_dsaddr *
-get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id);
+get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags);
#endif /* FS_NFS_NFS4FILELAYOUT_H */
diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c
index de5350f..db07c7a 100644
--- a/fs/nfs/nfs4filelayoutdev.c
+++ b/fs/nfs/nfs4filelayoutdev.c
@@ -225,11 +225,11 @@
}
static struct nfs4_pnfs_ds *
-nfs4_pnfs_ds_add(struct inode *inode, u32 ip_addr, u32 port)
+nfs4_pnfs_ds_add(struct inode *inode, u32 ip_addr, u32 port, gfp_t gfp_flags)
{
struct nfs4_pnfs_ds *tmp_ds, *ds;
- ds = kzalloc(sizeof(*tmp_ds), GFP_KERNEL);
+ ds = kzalloc(sizeof(*tmp_ds), gfp_flags);
if (!ds)
goto out;
@@ -261,7 +261,7 @@
* Currently only support ipv4, and one multi-path address.
*/
static struct nfs4_pnfs_ds *
-decode_and_add_ds(struct xdr_stream *streamp, struct inode *inode)
+decode_and_add_ds(struct xdr_stream *streamp, struct inode *inode, gfp_t gfp_flags)
{
struct nfs4_pnfs_ds *ds = NULL;
char *buf;
@@ -303,7 +303,7 @@
rlen);
goto out_err;
}
- buf = kmalloc(rlen + 1, GFP_KERNEL);
+ buf = kmalloc(rlen + 1, gfp_flags);
if (!buf) {
dprintk("%s: Not enough memory\n", __func__);
goto out_err;
@@ -333,7 +333,7 @@
sscanf(pstr, "-%d-%d", &tmp[0], &tmp[1]);
port = htons((tmp[0] << 8) | (tmp[1]));
- ds = nfs4_pnfs_ds_add(inode, ip_addr, port);
+ ds = nfs4_pnfs_ds_add(inode, ip_addr, port, gfp_flags);
dprintk("%s: Decoded address and port %s\n", __func__, buf);
out_free:
kfree(buf);
@@ -343,7 +343,7 @@
/* Decode opaque device data and return the result */
static struct nfs4_file_layout_dsaddr*
-decode_device(struct inode *ino, struct pnfs_device *pdev)
+decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags)
{
int i;
u32 cnt, num;
@@ -362,7 +362,7 @@
struct page *scratch;
/* set up xdr stream */
- scratch = alloc_page(GFP_KERNEL);
+ scratch = alloc_page(gfp_flags);
if (!scratch)
goto out_err;
@@ -384,7 +384,7 @@
}
/* read stripe indices */
- stripe_indices = kcalloc(cnt, sizeof(u8), GFP_KERNEL);
+ stripe_indices = kcalloc(cnt, sizeof(u8), gfp_flags);
if (!stripe_indices)
goto out_err_free_scratch;
@@ -423,7 +423,7 @@
dsaddr = kzalloc(sizeof(*dsaddr) +
(sizeof(struct nfs4_pnfs_ds *) * (num - 1)),
- GFP_KERNEL);
+ gfp_flags);
if (!dsaddr)
goto out_err_free_stripe_indices;
@@ -452,7 +452,7 @@
for (j = 0; j < mp_count; j++) {
if (j == 0) {
dsaddr->ds_list[i] = decode_and_add_ds(&stream,
- ino);
+ ino, gfp_flags);
if (dsaddr->ds_list[i] == NULL)
goto out_err_free_deviceid;
} else {
@@ -503,12 +503,12 @@
* available devices.
*/
static struct nfs4_file_layout_dsaddr *
-decode_and_add_device(struct inode *inode, struct pnfs_device *dev)
+decode_and_add_device(struct inode *inode, struct pnfs_device *dev, gfp_t gfp_flags)
{
struct nfs4_file_layout_dsaddr *d, *new;
long hash;
- new = decode_device(inode, dev);
+ new = decode_device(inode, dev, gfp_flags);
if (!new) {
printk(KERN_WARNING "%s: Could not decode or add device\n",
__func__);
@@ -537,7 +537,7 @@
* of available devices, and return it.
*/
struct nfs4_file_layout_dsaddr *
-get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id)
+get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags)
{
struct pnfs_device *pdev = NULL;
u32 max_resp_sz;
@@ -556,17 +556,17 @@
dprintk("%s inode %p max_resp_sz %u max_pages %d\n",
__func__, inode, max_resp_sz, max_pages);
- pdev = kzalloc(sizeof(struct pnfs_device), GFP_KERNEL);
+ pdev = kzalloc(sizeof(struct pnfs_device), gfp_flags);
if (pdev == NULL)
return NULL;
- pages = kzalloc(max_pages * sizeof(struct page *), GFP_KERNEL);
+ pages = kzalloc(max_pages * sizeof(struct page *), gfp_flags);
if (pages == NULL) {
kfree(pdev);
return NULL;
}
for (i = 0; i < max_pages; i++) {
- pages[i] = alloc_page(GFP_KERNEL);
+ pages[i] = alloc_page(gfp_flags);
if (!pages[i])
goto out_free;
}
@@ -587,7 +587,7 @@
* Found new device, need to decode it and then add it to the
* list of known devices for this mountpoint.
*/
- dsaddr = decode_and_add_device(inode, pdev);
+ dsaddr = decode_and_add_device(inode, pdev, gfp_flags);
out_free:
for (i = 0; i < max_pages; i++)
__free_page(pages[i]);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 69c0f3c..cf1b339 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -300,6 +300,7 @@
ret = nfs4_delay(server->client, &exception->timeout);
if (ret != 0)
break;
+ case -NFS4ERR_RETRY_UNCACHED_REP:
case -NFS4ERR_OLD_STATEID:
exception->retry = 1;
break;
@@ -3695,6 +3696,7 @@
rpc_delay(task, NFS4_POLL_RETRY_MAX);
task->tk_status = 0;
return -EAGAIN;
+ case -NFS4ERR_RETRY_UNCACHED_REP:
case -NFS4ERR_OLD_STATEID:
task->tk_status = 0;
return -EAGAIN;
@@ -4844,6 +4846,8 @@
dprintk("%s Retry: tk_status %d\n", __func__, task->tk_status);
rpc_delay(task, NFS4_POLL_RETRY_MIN);
task->tk_status = 0;
+ /* fall through */
+ case -NFS4ERR_RETRY_UNCACHED_REP:
nfs_restart_rpc(task, data->clp);
return;
}
@@ -5479,6 +5483,8 @@
break;
case -NFS4ERR_DELAY:
rpc_delay(task, NFS4_POLL_RETRY_MAX);
+ /* fall through */
+ case -NFS4ERR_RETRY_UNCACHED_REP:
return -EAGAIN;
default:
nfs4_schedule_lease_recovery(clp);
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index ff681ab..f57f528 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -383,6 +383,7 @@
plh_layouts);
dprintk("%s freeing layout for inode %lu\n", __func__,
lo->plh_inode->i_ino);
+ list_del_init(&lo->plh_layouts);
pnfs_destroy_layout(NFS_I(lo->plh_inode));
}
}
@@ -466,7 +467,8 @@
static struct pnfs_layout_segment *
send_layoutget(struct pnfs_layout_hdr *lo,
struct nfs_open_context *ctx,
- u32 iomode)
+ u32 iomode,
+ gfp_t gfp_flags)
{
struct inode *ino = lo->plh_inode;
struct nfs_server *server = NFS_SERVER(ino);
@@ -479,7 +481,7 @@
dprintk("--> %s\n", __func__);
BUG_ON(ctx == NULL);
- lgp = kzalloc(sizeof(*lgp), GFP_KERNEL);
+ lgp = kzalloc(sizeof(*lgp), gfp_flags);
if (lgp == NULL)
return NULL;
@@ -487,12 +489,12 @@
max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
max_pages = max_resp_sz >> PAGE_SHIFT;
- pages = kzalloc(max_pages * sizeof(struct page *), GFP_KERNEL);
+ pages = kzalloc(max_pages * sizeof(struct page *), gfp_flags);
if (!pages)
goto out_err_free;
for (i = 0; i < max_pages; i++) {
- pages[i] = alloc_page(GFP_KERNEL);
+ pages[i] = alloc_page(gfp_flags);
if (!pages[i])
goto out_err_free;
}
@@ -508,6 +510,7 @@
lgp->args.layout.pages = pages;
lgp->args.layout.pglen = max_pages * PAGE_SIZE;
lgp->lsegpp = &lseg;
+ lgp->gfp_flags = gfp_flags;
/* Synchronously retrieve layout information from server and
* store in lseg.
@@ -665,11 +668,11 @@
}
static struct pnfs_layout_hdr *
-alloc_init_layout_hdr(struct inode *ino)
+alloc_init_layout_hdr(struct inode *ino, gfp_t gfp_flags)
{
struct pnfs_layout_hdr *lo;
- lo = kzalloc(sizeof(struct pnfs_layout_hdr), GFP_KERNEL);
+ lo = kzalloc(sizeof(struct pnfs_layout_hdr), gfp_flags);
if (!lo)
return NULL;
atomic_set(&lo->plh_refcount, 1);
@@ -681,7 +684,7 @@
}
static struct pnfs_layout_hdr *
-pnfs_find_alloc_layout(struct inode *ino)
+pnfs_find_alloc_layout(struct inode *ino, gfp_t gfp_flags)
{
struct nfs_inode *nfsi = NFS_I(ino);
struct pnfs_layout_hdr *new = NULL;
@@ -696,7 +699,7 @@
return nfsi->layout;
}
spin_unlock(&ino->i_lock);
- new = alloc_init_layout_hdr(ino);
+ new = alloc_init_layout_hdr(ino, gfp_flags);
spin_lock(&ino->i_lock);
if (likely(nfsi->layout == NULL)) /* Won the race? */
@@ -756,7 +759,8 @@
struct pnfs_layout_segment *
pnfs_update_layout(struct inode *ino,
struct nfs_open_context *ctx,
- enum pnfs_iomode iomode)
+ enum pnfs_iomode iomode,
+ gfp_t gfp_flags)
{
struct nfs_inode *nfsi = NFS_I(ino);
struct nfs_client *clp = NFS_SERVER(ino)->nfs_client;
@@ -767,7 +771,7 @@
if (!pnfs_enabled_sb(NFS_SERVER(ino)))
return NULL;
spin_lock(&ino->i_lock);
- lo = pnfs_find_alloc_layout(ino);
+ lo = pnfs_find_alloc_layout(ino, gfp_flags);
if (lo == NULL) {
dprintk("%s ERROR: can't get pnfs_layout_hdr\n", __func__);
goto out_unlock;
@@ -807,7 +811,7 @@
spin_unlock(&clp->cl_lock);
}
- lseg = send_layoutget(lo, ctx, iomode);
+ lseg = send_layoutget(lo, ctx, iomode, gfp_flags);
if (!lseg && first) {
spin_lock(&clp->cl_lock);
list_del_init(&lo->plh_layouts);
@@ -846,7 +850,7 @@
goto out;
}
/* Inject layout blob into I/O device driver */
- lseg = NFS_SERVER(ino)->pnfs_curr_ld->alloc_lseg(lo, res);
+ lseg = NFS_SERVER(ino)->pnfs_curr_ld->alloc_lseg(lo, res, lgp->gfp_flags);
if (!lseg || IS_ERR(lseg)) {
if (!lseg)
status = -ENOMEM;
@@ -899,7 +903,8 @@
/* This is first coelesce call for a series of nfs_pages */
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
prev->wb_context,
- IOMODE_READ);
+ IOMODE_READ,
+ GFP_KERNEL);
}
return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req);
}
@@ -921,7 +926,8 @@
/* This is first coelesce call for a series of nfs_pages */
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
prev->wb_context,
- IOMODE_RW);
+ IOMODE_RW,
+ GFP_NOFS);
}
return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req);
}
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index bc48272..0c015ba 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -70,7 +70,7 @@
const u32 id;
const char *name;
struct module *owner;
- struct pnfs_layout_segment * (*alloc_lseg) (struct pnfs_layout_hdr *layoutid, struct nfs4_layoutget_res *lgr);
+ struct pnfs_layout_segment * (*alloc_lseg) (struct pnfs_layout_hdr *layoutid, struct nfs4_layoutget_res *lgr, gfp_t gfp_flags);
void (*free_lseg) (struct pnfs_layout_segment *lseg);
/* test for nfs page cache coalescing */
@@ -126,7 +126,7 @@
void put_lseg(struct pnfs_layout_segment *lseg);
struct pnfs_layout_segment *
pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx,
- enum pnfs_iomode access_type);
+ enum pnfs_iomode access_type, gfp_t gfp_flags);
void set_pnfs_layoutdriver(struct nfs_server *, u32 id);
void unset_pnfs_layoutdriver(struct nfs_server *);
enum pnfs_try_status pnfs_try_to_write_data(struct nfs_write_data *,
@@ -245,7 +245,7 @@
static inline struct pnfs_layout_segment *
pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx,
- enum pnfs_iomode access_type)
+ enum pnfs_iomode access_type, gfp_t gfp_flags)
{
return NULL;
}
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 7cded2b..2bcf0dc 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -288,7 +288,7 @@
atomic_set(&req->wb_complete, requests);
BUG_ON(desc->pg_lseg != NULL);
- lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ);
+ lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ, GFP_KERNEL);
ClearPageError(page);
offset = 0;
nbytes = desc->pg_count;
@@ -351,7 +351,7 @@
}
req = nfs_list_entry(data->pages.next);
if ((!lseg) && list_is_singular(&data->pages))
- lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ);
+ lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ, GFP_KERNEL);
ret = nfs_read_rpcsetup(req, data, &nfs_read_full_ops, desc->pg_count,
0, lseg);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 3bd5d7e..49c715b 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -939,7 +939,7 @@
atomic_set(&req->wb_complete, requests);
BUG_ON(desc->pg_lseg);
- lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW);
+ lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW, GFP_NOFS);
ClearPageError(page);
offset = 0;
nbytes = desc->pg_count;
@@ -1013,7 +1013,7 @@
}
req = nfs_list_entry(data->pages.next);
if ((!lseg) && list_is_singular(&data->pages))
- lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW);
+ lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW, GFP_NOFS);
if ((desc->pg_ioflags & FLUSH_COND_STABLE) &&
(desc->pg_moreio || NFS_I(desc->pg_inode)->ncommit))
diff --git a/fs/nilfs2/alloc.c b/fs/nilfs2/alloc.c
index 0a0a66d..f768448 100644
--- a/fs/nilfs2/alloc.c
+++ b/fs/nilfs2/alloc.c
@@ -646,7 +646,7 @@
unsigned long group, group_offset;
int i, j, n, ret;
- for (i = 0; i < nitems; i += n) {
+ for (i = 0; i < nitems; i = j) {
group = nilfs_palloc_group(inode, entry_nrs[i], &group_offset);
ret = nilfs_palloc_get_desc_block(inode, group, 0, &desc_bh);
if (ret < 0)
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 6437202..9a3e6bb 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -539,25 +539,41 @@
/* We want to make sure that nobody is heartbeating on top of us --
* this will help detect an invalid configuration. */
-static int o2hb_check_last_timestamp(struct o2hb_region *reg)
+static void o2hb_check_last_timestamp(struct o2hb_region *reg)
{
- int node_num, ret;
struct o2hb_disk_slot *slot;
struct o2hb_disk_heartbeat_block *hb_block;
+ char *errstr;
- node_num = o2nm_this_node();
-
- ret = 1;
- slot = ®->hr_slots[node_num];
+ slot = ®->hr_slots[o2nm_this_node()];
/* Don't check on our 1st timestamp */
- if (slot->ds_last_time) {
- hb_block = slot->ds_raw_block;
+ if (!slot->ds_last_time)
+ return;
- if (le64_to_cpu(hb_block->hb_seq) != slot->ds_last_time)
- ret = 0;
- }
+ hb_block = slot->ds_raw_block;
+ if (le64_to_cpu(hb_block->hb_seq) == slot->ds_last_time &&
+ le64_to_cpu(hb_block->hb_generation) == slot->ds_last_generation &&
+ hb_block->hb_node == slot->ds_node_num)
+ return;
- return ret;
+#define ERRSTR1 "Another node is heartbeating on device"
+#define ERRSTR2 "Heartbeat generation mismatch on device"
+#define ERRSTR3 "Heartbeat sequence mismatch on device"
+
+ if (hb_block->hb_node != slot->ds_node_num)
+ errstr = ERRSTR1;
+ else if (le64_to_cpu(hb_block->hb_generation) !=
+ slot->ds_last_generation)
+ errstr = ERRSTR2;
+ else
+ errstr = ERRSTR3;
+
+ mlog(ML_ERROR, "%s (%s): expected(%u:0x%llx, 0x%llx), "
+ "ondisk(%u:0x%llx, 0x%llx)\n", errstr, reg->hr_dev_name,
+ slot->ds_node_num, (unsigned long long)slot->ds_last_generation,
+ (unsigned long long)slot->ds_last_time, hb_block->hb_node,
+ (unsigned long long)le64_to_cpu(hb_block->hb_generation),
+ (unsigned long long)le64_to_cpu(hb_block->hb_seq));
}
static inline void o2hb_prepare_block(struct o2hb_region *reg,
@@ -983,9 +999,7 @@
/* With an up to date view of the slots, we can check that no
* other node has been improperly configured to heartbeat in
* our slot. */
- if (!o2hb_check_last_timestamp(reg))
- mlog(ML_ERROR, "Device \"%s\": another node is heartbeating "
- "in our slot!\n", reg->hr_dev_name);
+ o2hb_check_last_timestamp(reg);
/* fill in the proper info for our next heartbeat */
o2hb_prepare_block(reg, reg->hr_generation);
@@ -999,8 +1013,8 @@
}
i = -1;
- while((i = find_next_bit(configured_nodes, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) {
-
+ while((i = find_next_bit(configured_nodes,
+ O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) {
change |= o2hb_check_slot(reg, ®->hr_slots[i]);
}
@@ -1690,6 +1704,7 @@
struct file *filp = NULL;
struct inode *inode = NULL;
ssize_t ret = -EINVAL;
+ int live_threshold;
if (reg->hr_bdev)
goto out;
@@ -1766,8 +1781,18 @@
* A node is considered live after it has beat LIVE_THRESHOLD
* times. We're not steady until we've given them a chance
* _after_ our first read.
+ * The default threshold is bare minimum so as to limit the delay
+ * during mounts. For global heartbeat, the threshold doubled for the
+ * first region.
*/
- atomic_set(®->hr_steady_iterations, O2HB_LIVE_THRESHOLD + 1);
+ live_threshold = O2HB_LIVE_THRESHOLD;
+ if (o2hb_global_heartbeat_active()) {
+ spin_lock(&o2hb_live_lock);
+ if (o2hb_pop_count(&o2hb_region_bitmap, O2NM_MAX_REGIONS) == 1)
+ live_threshold <<= 1;
+ spin_unlock(&o2hb_live_lock);
+ }
+ atomic_set(®->hr_steady_iterations, live_threshold + 1);
hb_task = kthread_run(o2hb_thread, reg, "o2hb-%s",
reg->hr_item.ci_name);
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 9fe5b8fd..8582e3f 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2868,7 +2868,7 @@
bytes = blocks_wanted << sb->s_blocksize_bits;
struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
struct ocfs2_inode_info *oi = OCFS2_I(dir);
- struct ocfs2_alloc_context *data_ac;
+ struct ocfs2_alloc_context *data_ac = NULL;
struct ocfs2_alloc_context *meta_ac = NULL;
struct buffer_head *dirdata_bh = NULL;
struct buffer_head *dx_root_bh = NULL;
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 7540a49..3b179d6 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1614,7 +1614,8 @@
spin_unlock(&dlm->spinlock);
/* Support for global heartbeat and node info was added in 1.1 */
- if (dlm_protocol.pv_major > 1 || dlm_protocol.pv_minor > 0) {
+ if (dlm->dlm_locking_proto.pv_major > 1 ||
+ dlm->dlm_locking_proto.pv_minor > 0) {
status = dlm_send_nodeinfo(dlm, ctxt->yes_resp_map);
if (status) {
mlog_errno(status);
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index fede57e..84d1663 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2574,6 +2574,9 @@
res->state &= ~DLM_LOCK_RES_MIGRATING;
wake = 1;
spin_unlock(&res->spinlock);
+ if (dlm_is_host_down(ret))
+ dlm_wait_for_node_death(dlm, target,
+ DLM_NODE_DEATH_WAIT_MAX);
goto leave;
}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 41565ae..89659d6 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1607,6 +1607,9 @@
range = le32_to_cpu(rec->e_cpos) + ocfs2_rec_clusters(el, rec);
if (le32_to_cpu(rec->e_cpos) >= trunc_start) {
+ /*
+ * remove an entire extent record.
+ */
*trunc_cpos = le32_to_cpu(rec->e_cpos);
/*
* Skip holes if any.
@@ -1617,7 +1620,16 @@
*blkno = le64_to_cpu(rec->e_blkno);
*trunc_end = le32_to_cpu(rec->e_cpos);
} else if (range > trunc_start) {
+ /*
+ * remove a partial extent record, which means we're
+ * removing the last extent record.
+ */
*trunc_cpos = trunc_start;
+ /*
+ * skip hole if any.
+ */
+ if (range < *trunc_end)
+ *trunc_end = range;
*trunc_len = *trunc_end - trunc_start;
coff = trunc_start - le32_to_cpu(rec->e_cpos);
*blkno = le64_to_cpu(rec->e_blkno) +
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index b141a44..295d564 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1260,6 +1260,9 @@
{
struct ocfs2_journal *journal = osb->journal;
+ if (ocfs2_is_hard_readonly(osb))
+ return;
+
/* No need to queue up our truncate_log as regular cleanup will catch
* that */
ocfs2_queue_recovery_completion(journal, osb->slot_num,
diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index ac0ccb5..19d6750 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -348,6 +348,12 @@
goto fail;
}
+ /* Check that sizeof_partition_entry has the correct value */
+ if (le32_to_cpu((*gpt)->sizeof_partition_entry) != sizeof(gpt_entry)) {
+ pr_debug("GUID Partitition Entry Size check failed.\n");
+ goto fail;
+ }
+
if (!(*ptes = alloc_read_gpt_entries(state, *gpt)))
goto fail;
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index ce4f624..a29d5cc 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -1335,6 +1335,11 @@
list_add_tail (&f->list, frags);
found:
+ if (rec >= f->num) {
+ ldm_error("REC value (%d) exceeds NUM value (%d)", rec, f->num);
+ return false;
+ }
+
if (f->map & (1 << rec)) {
ldm_error ("Duplicate VBLK, part %d.", rec);
f->map &= 0x7F; /* Mark the group as broken */
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 2e7addf..318d865 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -214,7 +214,7 @@
int flags = vma->vm_flags;
unsigned long ino = 0;
unsigned long long pgoff = 0;
- unsigned long start;
+ unsigned long start, end;
dev_t dev = 0;
int len;
@@ -227,13 +227,15 @@
/* We don't show the stack guard page in /proc/maps */
start = vma->vm_start;
- if (vma->vm_flags & VM_GROWSDOWN)
- if (!vma_stack_continue(vma->vm_prev, vma->vm_start))
- start += PAGE_SIZE;
+ if (stack_guard_page_start(vma, start))
+ start += PAGE_SIZE;
+ end = vma->vm_end;
+ if (stack_guard_page_end(vma, end))
+ end -= PAGE_SIZE;
seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
start,
- vma->vm_end,
+ end,
flags & VM_READ ? 'r' : '-',
flags & VM_WRITE ? 'w' : '-',
flags & VM_EXEC ? 'x' : '-',
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index f835a25..f2c3ff2 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -152,21 +152,27 @@
void pstore_get_records(void)
{
struct pstore_info *psi = psinfo;
- size_t size;
+ ssize_t size;
u64 id;
enum pstore_type_id type;
struct timespec time;
- int failed = 0;
+ int failed = 0, rc;
if (!psi)
return;
mutex_lock(&psinfo->buf_mutex);
+ rc = psi->open(psi);
+ if (rc)
+ goto out;
+
while ((size = psi->read(&id, &type, &time)) > 0) {
- if (pstore_mkfile(type, psi->name, id, psi->buf, size,
+ if (pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
time, psi->erase))
failed++;
}
+ psi->close(psi);
+out:
mutex_unlock(&psinfo->buf_mutex);
if (failed)
diff --git a/fs/super.c b/fs/super.c
index 8a06881..c04f7e0 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -948,8 +948,7 @@
* filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
* but s_maxbytes was an unsigned long long for many releases. Throw
* this warning for a little while to try and catch filesystems that
- * violate this rule. This warning should be either removed or
- * converted to a BUG() in 2.6.34.
+ * violate this rule.
*/
WARN((sb->s_maxbytes < 0), "%s set sb->s_maxbytes to "
"negative value (%lld)\n", type->name, sb->s_maxbytes);
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index da3fefe..1ad8c93 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -24,13 +24,6 @@
#include "sysfs.h"
-/* used in crash dumps to help with debugging */
-static char last_sysfs_file[PATH_MAX];
-void sysfs_printk_last_file(void)
-{
- printk(KERN_EMERG "last sysfs file: %s\n", last_sysfs_file);
-}
-
/*
* There's one sysfs_buffer for each open file and one
* sysfs_open_dirent for each sysfs_dirent with one or more open
@@ -337,11 +330,6 @@
struct sysfs_buffer *buffer;
const struct sysfs_ops *ops;
int error = -EACCES;
- char *p;
-
- p = d_path(&file->f_path, last_sysfs_file, sizeof(last_sysfs_file));
- if (!IS_ERR(p))
- memmove(last_sysfs_file, p, strlen(p) + 1);
/* need attr_sd for attr and ops, its parent for kobj */
if (!sysfs_get_active(attr_sd))
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index c8769dc2..194414f 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -101,9 +101,9 @@
}
/**
- * sysfs_update_group - given a directory kobject, create an attribute group
- * @kobj: The kobject to create the group on
- * @grp: The attribute group to create
+ * sysfs_update_group - given a directory kobject, update an attribute group
+ * @kobj: The kobject to update the group on
+ * @grp: The attribute group to update
*
* This function updates an attribute group. Unlike
* sysfs_create_group(), it will explicitly not warn or error if any
diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c
index 4d0cb12..40fa780 100644
--- a/fs/ubifs/log.c
+++ b/fs/ubifs/log.c
@@ -175,26 +175,6 @@
}
/**
- * ubifs_create_buds_lists - create journal head buds lists for remount rw.
- * @c: UBIFS file-system description object
- */
-void ubifs_create_buds_lists(struct ubifs_info *c)
-{
- struct rb_node *p;
-
- spin_lock(&c->buds_lock);
- p = rb_first(&c->buds);
- while (p) {
- struct ubifs_bud *bud = rb_entry(p, struct ubifs_bud, rb);
- struct ubifs_jhead *jhead = &c->jheads[bud->jhead];
-
- list_add_tail(&bud->list, &jhead->buds_list);
- p = rb_next(p);
- }
- spin_unlock(&c->buds_lock);
-}
-
-/**
* ubifs_add_bud_to_log - add a new bud to the log.
* @c: UBIFS file-system description object
* @jhead: journal head the bud belongs to
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index eed0fcf..d3d6d36 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -59,6 +59,7 @@
* @new_size: truncation new size
* @free: amount of free space in a bud
* @dirty: amount of dirty space in a bud from padding and deletion nodes
+ * @jhead: journal head number of the bud
*
* UBIFS journal replay must compare node sequence numbers, which means it must
* build a tree of node information to insert into the TNC.
@@ -80,6 +81,7 @@
struct {
int free;
int dirty;
+ int jhead;
};
};
};
@@ -159,6 +161,11 @@
err = PTR_ERR(lp);
goto out;
}
+
+ /* Make sure the journal head points to the latest bud */
+ err = ubifs_wbuf_seek_nolock(&c->jheads[r->jhead].wbuf, r->lnum,
+ c->leb_size - r->free, UBI_SHORTTERM);
+
out:
ubifs_release_lprops(c);
return err;
@@ -627,10 +634,6 @@
ubifs_assert(sleb->endpt - offs >= used);
ubifs_assert(sleb->endpt % c->min_io_size == 0);
- if (sleb->endpt + c->min_io_size <= c->leb_size && !c->ro_mount)
- err = ubifs_wbuf_seek_nolock(&c->jheads[jhead].wbuf, lnum,
- sleb->endpt, UBI_SHORTTERM);
-
*dirty = sleb->endpt - offs - used;
*free = c->leb_size - sleb->endpt;
@@ -653,12 +656,14 @@
* @sqnum: sequence number
* @free: amount of free space in bud
* @dirty: amount of dirty space from padding and deletion nodes
+ * @jhead: journal head number for the bud
*
* This function inserts a reference node to the replay tree and returns zero
* in case of success or a negative error code in case of failure.
*/
static int insert_ref_node(struct ubifs_info *c, int lnum, int offs,
- unsigned long long sqnum, int free, int dirty)
+ unsigned long long sqnum, int free, int dirty,
+ int jhead)
{
struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL;
struct replay_entry *r;
@@ -688,6 +693,7 @@
r->flags = REPLAY_REF;
r->free = free;
r->dirty = dirty;
+ r->jhead = jhead;
rb_link_node(&r->rb, parent, p);
rb_insert_color(&r->rb, &c->replay_tree);
@@ -712,7 +718,7 @@
if (err)
return err;
err = insert_ref_node(c, b->bud->lnum, b->bud->start, b->sqnum,
- free, dirty);
+ free, dirty, b->bud->jhead);
if (err)
return err;
}
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index be6c7b0..04ad07f 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1257,12 +1257,12 @@
goto out_free;
}
+ err = alloc_wbufs(c);
+ if (err)
+ goto out_cbuf;
+
sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
if (!c->ro_mount) {
- err = alloc_wbufs(c);
- if (err)
- goto out_cbuf;
-
/* Create background thread */
c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name);
if (IS_ERR(c->bgt)) {
@@ -1631,12 +1631,6 @@
if (err)
goto out;
- err = alloc_wbufs(c);
- if (err)
- goto out;
-
- ubifs_create_buds_lists(c);
-
/* Create background thread */
c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name);
if (IS_ERR(c->bgt)) {
@@ -1744,7 +1738,6 @@
if (err)
ubifs_ro_mode(c, err);
- free_wbufs(c);
vfree(c->orph_buf);
c->orph_buf = NULL;
kfree(c->write_reserve_buf);
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index e4f9c1b..3e898a4 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -926,6 +926,7 @@
XFS_LOOKUP_BATCH,
XFS_ICI_RECLAIM_TAG);
if (!nr_found) {
+ done = 1;
rcu_read_unlock();
break;
}
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index acdb92f..5fc2380 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -346,20 +346,23 @@
*/
STATIC void
xfs_ail_worker(
- struct work_struct *work)
+ struct work_struct *work)
{
- struct xfs_ail *ailp = container_of(to_delayed_work(work),
+ struct xfs_ail *ailp = container_of(to_delayed_work(work),
struct xfs_ail, xa_work);
- long tout;
- xfs_lsn_t target = ailp->xa_target;
- xfs_lsn_t lsn;
- xfs_log_item_t *lip;
- int flush_log, count, stuck;
- xfs_mount_t *mp = ailp->xa_mount;
+ xfs_mount_t *mp = ailp->xa_mount;
struct xfs_ail_cursor *cur = &ailp->xa_cursors;
- int push_xfsbufd = 0;
+ xfs_log_item_t *lip;
+ xfs_lsn_t lsn;
+ xfs_lsn_t target;
+ long tout = 10;
+ int flush_log = 0;
+ int stuck = 0;
+ int count = 0;
+ int push_xfsbufd = 0;
spin_lock(&ailp->xa_lock);
+ target = ailp->xa_target;
xfs_trans_ail_cursor_init(ailp, cur);
lip = xfs_trans_ail_cursor_first(ailp, cur, ailp->xa_last_pushed_lsn);
if (!lip || XFS_FORCED_SHUTDOWN(mp)) {
@@ -368,8 +371,7 @@
*/
xfs_trans_ail_cursor_done(ailp, cur);
spin_unlock(&ailp->xa_lock);
- ailp->xa_last_pushed_lsn = 0;
- return;
+ goto out_done;
}
XFS_STATS_INC(xs_push_ail);
@@ -386,8 +388,7 @@
* lots of contention on the AIL lists.
*/
lsn = lip->li_lsn;
- flush_log = stuck = count = 0;
- while ((XFS_LSN_CMP(lip->li_lsn, target) < 0)) {
+ while ((XFS_LSN_CMP(lip->li_lsn, target) <= 0)) {
int lock_result;
/*
* If we can lock the item without sleeping, unlock the AIL
@@ -480,21 +481,25 @@
}
/* assume we have more work to do in a short while */
- tout = 10;
+out_done:
if (!count) {
/* We're past our target or empty, so idle */
ailp->xa_last_pushed_lsn = 0;
/*
- * Check for an updated push target before clearing the
- * XFS_AIL_PUSHING_BIT. If the target changed, we've got more
- * work to do. Wait a bit longer before starting that work.
+ * We clear the XFS_AIL_PUSHING_BIT first before checking
+ * whether the target has changed. If the target has changed,
+ * this pushes the requeue race directly onto the result of the
+ * atomic test/set bit, so we are guaranteed that either the
+ * the pusher that changed the target or ourselves will requeue
+ * the work (but not both).
*/
+ clear_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags);
smp_rmb();
- if (ailp->xa_target == target) {
- clear_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags);
+ if (XFS_LSN_CMP(ailp->xa_target, target) == 0 ||
+ test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
return;
- }
+
tout = 50;
} else if (XFS_LSN_CMP(lsn, target) >= 0) {
/*
@@ -553,7 +558,7 @@
* the XFS_AIL_PUSHING_BIT.
*/
smp_wmb();
- ailp->xa_target = threshold_lsn;
+ xfs_trans_ail_copy_lsn(ailp, &ailp->xa_target, &threshold_lsn);
if (!test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
queue_delayed_work(xfs_syncd_wq, &ailp->xa_work, 0);
}
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index bd297a2..077c00d 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -170,6 +170,10 @@
STRUCT_ALIGN(); \
*(__tracepoints) \
/* implement dynamic printk debug */ \
+ . = ALIGN(8); \
+ VMLINUX_SYMBOL(__start___jump_table) = .; \
+ *(__jump_table) \
+ VMLINUX_SYMBOL(__stop___jump_table) = .; \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___verbose) = .; \
*(__verbose) \
@@ -228,8 +232,6 @@
\
BUG_TABLE \
\
- JUMP_TABLE \
- \
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
@@ -274,70 +276,70 @@
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
- *(__ksymtab) \
+ *(SORT(___ksymtab+*)) \
VMLINUX_SYMBOL(__stop___ksymtab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
- *(__ksymtab_gpl) \
+ *(SORT(___ksymtab_gpl+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
- *(__ksymtab_unused) \
+ *(SORT(___ksymtab_unused+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
- *(__ksymtab_unused_gpl) \
+ *(SORT(___ksymtab_unused_gpl+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
- *(__ksymtab_gpl_future) \
+ *(SORT(___ksymtab_gpl_future+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
} \
\
/* Kernel symbol table: Normal symbols */ \
__kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab) = .; \
- *(__kcrctab) \
+ *(SORT(___kcrctab+*)) \
VMLINUX_SYMBOL(__stop___kcrctab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
- *(__kcrctab_gpl) \
+ *(SORT(___kcrctab_gpl+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused) = .; \
- *(__kcrctab_unused) \
+ *(SORT(___kcrctab_unused+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
- *(__kcrctab_unused_gpl) \
+ *(SORT(___kcrctab_unused_gpl+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
- *(__kcrctab_gpl_future) \
+ *(SORT(___kcrctab_gpl_future+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
} \
\
@@ -589,14 +591,6 @@
#define BUG_TABLE
#endif
-#define JUMP_TABLE \
- . = ALIGN(8); \
- __jump_table : AT(ADDR(__jump_table) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___jump_table) = .; \
- *(__jump_table) \
- VMLINUX_SYMBOL(__stop___jump_table) = .; \
- }
-
#ifdef CONFIG_PM_TRACE
#define TRACEDATA \
. = ALIGN(4); \
diff --git a/include/asm-generic/xor.h b/include/asm-generic/xor.h
index aaab875..6028fb8 100644
--- a/include/asm-generic/xor.h
+++ b/include/asm-generic/xor.h
@@ -13,7 +13,7 @@
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <asm/processor.h>
+#include <linux/prefetch.h>
static void
xor_8regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index ade09d7b..c99c3d3 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -127,7 +127,7 @@
int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
-bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
+int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper);
int drm_fb_helper_debug_enter(struct fb_info *info);
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index c2f93a8..564b14a 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -86,7 +86,7 @@
}
#define drm_mm_for_each_node(entry, mm) list_for_each_entry(entry, \
&(mm)->head_node.node_list, \
- node_list);
+ node_list)
#define drm_mm_for_each_scanned_node_reverse(entry, n, mm) \
for (entry = (mm)->prev_scanned_node, \
next = entry ? list_entry(entry->node_list.next, \
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 816e30c..f04b2a3 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -155,6 +155,7 @@
{0x1002, 0x6719, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x671c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x671d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x671f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6721, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6722, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
@@ -167,6 +168,7 @@
{0x1002, 0x6729, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6739, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x673e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6740, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6741, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6742, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -199,6 +201,7 @@
{0x1002, 0x688D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6898, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6899, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x689b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x689c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
{0x1002, 0x689d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
{0x1002, 0x689e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
@@ -209,7 +212,9 @@
{0x1002, 0x68b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68b8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68b9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x68ba, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68be, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x68bf, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68c7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 7aa5ddd..787f7b6 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -910,6 +910,7 @@
#define RADEON_INFO_CLOCK_CRYSTAL_FREQ 0x09 /* clock crystal frequency */
#define RADEON_INFO_NUM_BACKENDS 0x0a /* DB/backends for r600+ - need for OQ */
#define RADEON_INFO_NUM_TILE_PIPES 0x0b /* tile pipes for r600+ */
+#define RADEON_INFO_FUSION_GART_WORKING 0x0c /* fusion writes to GTT were broken before this */
struct drm_radeon_info {
uint32_t request;
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h
new file mode 100644
index 0000000..c5d6095
--- /dev/null
+++ b/include/linux/alarmtimer.h
@@ -0,0 +1,40 @@
+#ifndef _LINUX_ALARMTIMER_H
+#define _LINUX_ALARMTIMER_H
+
+#include <linux/time.h>
+#include <linux/hrtimer.h>
+#include <linux/timerqueue.h>
+#include <linux/rtc.h>
+
+enum alarmtimer_type {
+ ALARM_REALTIME,
+ ALARM_BOOTTIME,
+
+ ALARM_NUMTYPE,
+};
+
+/**
+ * struct alarm - Alarm timer structure
+ * @node: timerqueue node for adding to the event list this value
+ * also includes the expiration time.
+ * @period: Period for recuring alarms
+ * @function: Function pointer to be executed when the timer fires.
+ * @type: Alarm type (BOOTTIME/REALTIME)
+ * @enabled: Flag that represents if the alarm is set to fire or not
+ * @data: Internal data value.
+ */
+struct alarm {
+ struct timerqueue_node node;
+ ktime_t period;
+ void (*function)(struct alarm *);
+ enum alarmtimer_type type;
+ bool enabled;
+ void *data;
+};
+
+void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
+ void (*function)(struct alarm *));
+void alarm_start(struct alarm *alarm, ktime_t start, ktime_t period);
+void alarm_cancel(struct alarm *alarm);
+
+#endif
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
index b847fc7..60a7c49 100644
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -23,6 +23,13 @@
struct ath9k_platform_data {
u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+ u8 *macaddr;
+
+ int led_pin;
+ u32 gpio_mask;
+ u32 gpio_val;
+
+ bool is_clk_25mhz;
};
#endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 0000000..08763e4
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+ BCMA_HOSTTYPE_NONE,
+ BCMA_HOSTTYPE_PCI,
+ BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+ u16 id;
+ u8 rev;
+ u8 pkg;
+};
+
+struct bcma_host_ops {
+ u8 (*read8)(struct bcma_device *core, u16 offset);
+ u16 (*read16)(struct bcma_device *core, u16 offset);
+ u32 (*read32)(struct bcma_device *core, u16 offset);
+ void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+ void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+ void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+ /* Agent ops */
+ u32 (*aread32)(struct bcma_device *core, u16 offset);
+ void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM 0x43B
+#define BCMA_MANUF_MIPS 0x4A7
+#define BCMA_MANUF_BCM 0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM 0x0
+#define BCMA_CL_EROM 0x1
+#define BCMA_CL_CORESIGHT 0x9
+#define BCMA_CL_VERIF 0xB
+#define BCMA_CL_OPTIMO 0xD
+#define BCMA_CL_GEN 0xE
+#define BCMA_CL_PRIMECELL 0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
+#define BCMA_CORE_INVALID 0x700
+#define BCMA_CORE_CHIPCOMMON 0x800
+#define BCMA_CORE_ILINE20 0x801
+#define BCMA_CORE_SRAM 0x802
+#define BCMA_CORE_SDRAM 0x803
+#define BCMA_CORE_PCI 0x804
+#define BCMA_CORE_MIPS 0x805
+#define BCMA_CORE_ETHERNET 0x806
+#define BCMA_CORE_V90 0x807
+#define BCMA_CORE_USB11_HOSTDEV 0x808
+#define BCMA_CORE_ADSL 0x809
+#define BCMA_CORE_ILINE100 0x80A
+#define BCMA_CORE_IPSEC 0x80B
+#define BCMA_CORE_UTOPIA 0x80C
+#define BCMA_CORE_PCMCIA 0x80D
+#define BCMA_CORE_INTERNAL_MEM 0x80E
+#define BCMA_CORE_MEMC_SDRAM 0x80F
+#define BCMA_CORE_OFDM 0x810
+#define BCMA_CORE_EXTIF 0x811
+#define BCMA_CORE_80211 0x812
+#define BCMA_CORE_PHY_A 0x813
+#define BCMA_CORE_PHY_B 0x814
+#define BCMA_CORE_PHY_G 0x815
+#define BCMA_CORE_MIPS_3302 0x816
+#define BCMA_CORE_USB11_HOST 0x817
+#define BCMA_CORE_USB11_DEV 0x818
+#define BCMA_CORE_USB20_HOST 0x819
+#define BCMA_CORE_USB20_DEV 0x81A
+#define BCMA_CORE_SDIO_HOST 0x81B
+#define BCMA_CORE_ROBOSWITCH 0x81C
+#define BCMA_CORE_PARA_ATA 0x81D
+#define BCMA_CORE_SATA_XORDMA 0x81E
+#define BCMA_CORE_ETHERNET_GBIT 0x81F
+#define BCMA_CORE_PCIE 0x820
+#define BCMA_CORE_PHY_N 0x821
+#define BCMA_CORE_SRAM_CTL 0x822
+#define BCMA_CORE_MINI_MACPHY 0x823
+#define BCMA_CORE_ARM_1176 0x824
+#define BCMA_CORE_ARM_7TDMI 0x825
+#define BCMA_CORE_PHY_LP 0x826
+#define BCMA_CORE_PMU 0x827
+#define BCMA_CORE_PHY_SSN 0x828
+#define BCMA_CORE_SDIO_DEV 0x829
+#define BCMA_CORE_ARM_CM3 0x82A
+#define BCMA_CORE_PHY_HT 0x82B
+#define BCMA_CORE_MIPS_74K 0x82C
+#define BCMA_CORE_MAC_GBIT 0x82D
+#define BCMA_CORE_DDR12_MEM_CTL 0x82E
+#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE 0x830
+#define BCMA_CORE_SHARED_COMMON 0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE 0x832
+#define BCMA_CORE_SPI_HOST 0x833
+#define BCMA_CORE_I2S 0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT 0xFFF
+
+#define BCMA_MAX_NR_CORES 16
+
+struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
+
+ struct device dev;
+ bool dev_registered;
+
+ u8 core_index;
+
+ u32 addr;
+ u32 wrap;
+
+ void *drvdata;
+ struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+ return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+ core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+ const char *name;
+ const struct bcma_device_id *id_table;
+
+ int (*probe)(struct bcma_device *dev);
+ void (*remove)(struct bcma_device *dev);
+ int (*suspend)(struct bcma_device *dev, pm_message_t state);
+ int (*resume)(struct bcma_device *dev);
+ void (*shutdown)(struct bcma_device *dev);
+
+ struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+ return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+ /* The MMIO area. */
+ void __iomem *mmio;
+
+ const struct bcma_host_ops *ops;
+
+ enum bcma_hosttype hosttype;
+ union {
+ /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+ struct pci_dev *host_pci;
+ /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+ struct sdio_func *host_sdio;
+ };
+
+ struct bcma_chipinfo chipinfo;
+
+ struct bcma_device *mapped_core;
+ struct list_head cores;
+ u8 nr_cores;
+
+ struct bcma_drv_cc drv_cc;
+ struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 0000000..083c3b6
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,302 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID 0x0000
+#define BCMA_CC_ID_ID 0x0000FFFF
+#define BCMA_CC_ID_ID_SHIFT 0
+#define BCMA_CC_ID_REV 0x000F0000
+#define BCMA_CC_ID_REV_SHIFT 16
+#define BCMA_CC_ID_PKG 0x00F00000
+#define BCMA_CC_ID_PKG_SHIFT 20
+#define BCMA_CC_ID_NRCORES 0x0F000000
+#define BCMA_CC_ID_NRCORES_SHIFT 24
+#define BCMA_CC_ID_TYPE 0xF0000000
+#define BCMA_CC_ID_TYPE_SHIFT 28
+#define BCMA_CC_CAP 0x0004 /* Capabilities */
+#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
+#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
+#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
+#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
+#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
+#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
+#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
+#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+#define BCMA_PLLTYPE_NONE 0x00000000
+#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
+#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
+#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
+#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
+#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
+#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
+#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
+#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
+#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
+#define BCMA_CC_CAP_OTPS_SHIFT 19
+#define BCMA_CC_CAP_OTPS_BASE 5
+#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
+#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
+#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
+#define BCMA_CC_CORECTL 0x0008
+#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST 0x000C
+#define BCMA_CC_OTPS 0x0010 /* OTP status */
+#define BCMA_CC_OTPS_PROGFAIL 0x80000000
+#define BCMA_CC_OTPS_PROTECT 0x00000007
+#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
+#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
+#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
+#define BCMA_CC_OTPC 0x0014 /* OTP control */
+#define BCMA_CC_OTPC_RECWAIT 0xFF000000
+#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
+#define BCMA_CC_OTPC_PRW_SHIFT 8
+#define BCMA_CC_OTPC_MAXFAIL 0x00000038
+#define BCMA_CC_OTPC_VSEL 0x00000006
+#define BCMA_CC_OTPC_SELVL 0x00000001
+#define BCMA_CC_OTPP 0x0018 /* OTP prog */
+#define BCMA_CC_OTPP_COL 0x000000FF
+#define BCMA_CC_OTPP_ROW 0x0000FF00
+#define BCMA_CC_OTPP_ROW_SHIFT 8
+#define BCMA_CC_OTPP_READERR 0x10000000
+#define BCMA_CC_OTPP_VALUE 0x20000000
+#define BCMA_CC_OTPP_READ 0x40000000
+#define BCMA_CC_OTPP_START 0x80000000
+#define BCMA_CC_OTPP_BUSY 0x80000000
+#define BCMA_CC_IRQSTAT 0x0020
+#define BCMA_CC_IRQMASK 0x0024
+#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
+#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
+#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
+#define BCMA_CC_JCMD_START 0x80000000
+#define BCMA_CC_JCMD_BUSY 0x80000000
+#define BCMA_CC_JCMD_PAUSE 0x40000000
+#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
+#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
+#define BCMA_CC_JCMD0_ACC_DR 0x00001000
+#define BCMA_CC_JCMD0_ACC_IR 0x00002000
+#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
+#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
+#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
+#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
+#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
+#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
+#define BCMA_CC_JCMD_ACC_DR 0x00010000
+#define BCMA_CC_JCMD_ACC_IR 0x00020000
+#define BCMA_CC_JCMD_ACC_RESET 0x00030000
+#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
+#define BCMA_CC_JCMD_ACC_PDR 0x00050000
+#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
+#define BCMA_CC_JCMD_IRW_SHIFT 8
+#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
+#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
+#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
+#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
+#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
+#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+#define BCMA_CC_FLASHCTL 0x0040
+#define BCMA_CC_FLASHCTL_START 0x80000000
+#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR 0x0044
+#define BCMA_CC_FLASHDATA 0x0048
+#define BCMA_CC_BCAST_ADDR 0x0050
+#define BCMA_CC_BCAST_DATA 0x0054
+#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
+#define BCMA_CC_GPIOIN 0x0060
+#define BCMA_CC_GPIOOUT 0x0064
+#define BCMA_CC_GPIOOUTEN 0x0068
+#define BCMA_CC_GPIOCTL 0x006C
+#define BCMA_CC_GPIOPOL 0x0070
+#define BCMA_CC_GPIOIRQ 0x0074
+#define BCMA_CC_WATCHDOG 0x0080
+#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF
+#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0
+#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000
+#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
+#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N 0x0090
+#define BCMA_CC_CLOCK_SB 0x0094
+#define BCMA_CC_CLOCK_PCI 0x0098
+#define BCMA_CC_CLOCK_M2 0x009C
+#define BCMA_CC_CLOCK_MIPS 0x00A0
+#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
+#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
+#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
+#define BCMA_CC_CLKDIV_OTP 0x000F0000
+#define BCMA_CC_CLKDIV_OTP_SHIFT 16
+#define BCMA_CC_CLKDIV_JTAG 0x00000F00
+#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
+#define BCMA_CC_CLKDIV_UART 0x000000FF
+#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
+#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
+#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
+#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
+#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
+#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
+#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
+#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
+#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
+#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
+#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
+#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
+#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
+#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
+#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
+#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
+#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
+#define BCMA_CC_EROM 0x00FC
+#define BCMA_CC_PCMCIA_CFG 0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
+#define BCMA_CC_PCMCIA_IOWAIT 0x010C
+#define BCMA_CC_IDE_CFG 0x0110
+#define BCMA_CC_IDE_MEMWAIT 0x0114
+#define BCMA_CC_IDE_ATTRWAIT 0x0118
+#define BCMA_CC_IDE_IOWAIT 0x011C
+#define BCMA_CC_PROG_CFG 0x0120
+#define BCMA_CC_PROG_WAITCNT 0x0124
+#define BCMA_CC_FLASH_CFG 0x0128
+#define BCMA_CC_FLASH_WAITCNT 0x012C
+#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
+#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
+#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
+#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
+#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA 0x0300
+#define BCMA_CC_UART0_IMR 0x0304
+#define BCMA_CC_UART0_FCR 0x0308
+#define BCMA_CC_UART0_LCR 0x030C
+#define BCMA_CC_UART0_MCR 0x0310
+#define BCMA_CC_UART0_LSR 0x0314
+#define BCMA_CC_UART0_MSR 0x0318
+#define BCMA_CC_UART0_SCRATCH 0x031C
+#define BCMA_CC_UART1_DATA 0x0400
+#define BCMA_CC_UART1_IMR 0x0404
+#define BCMA_CC_UART1_FCR 0x0408
+#define BCMA_CC_UART1_LCR 0x040C
+#define BCMA_CC_UART1_MCR 0x0410
+#define BCMA_CC_UART1_LSR 0x0414
+#define BCMA_CC_UART1_MSR 0x0418
+#define BCMA_CC_UART1_SCRATCH 0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
+#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
+#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
+#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
+#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
+#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
+#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
+#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
+#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR 0x0650
+#define BCMA_CC_CHIPCTL_DATA 0x0654
+#define BCMA_CC_REGCTL_ADDR 0x0658
+#define BCMA_CC_REGCTL_DATA 0x065C
+#define BCMA_CC_PLLCTL_ADDR 0x0660
+#define BCMA_CC_PLLCTL_DATA 0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+ u8 rev; /* PMU revision */
+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+ struct bcma_device *core;
+ u32 status;
+ u32 capabilities;
+ u32 capabilities_ext;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+ bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+ bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+ u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 0000000..b7e191c
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
+#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
+#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
+#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
+#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
+#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
+#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
+#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
+#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
+#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
+#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
+#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
+#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
+#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
+#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
+#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
+#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
+#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
+#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
+#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
+#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
+#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
+#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
+#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+ struct bcma_device *core;
+ u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 0000000..f82d88a
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL 0x0408
+#define BCMA_IOCTL_CLK 0x0001
+#define BCMA_IOCTL_FGC 0x0002
+#define BCMA_IOCTL_CORE_BITS 0x3FFC
+#define BCMA_IOCTL_PME_EN 0x4000
+#define BCMA_IOCTL_BIST_EN 0x8000
+#define BCMA_RESET_CTL 0x0800
+#define BCMA_RESET_CTL_RESET 0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR 0x44
+#define BCMA_PCI_PE 0x100
+#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */
+#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */
+#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */
+#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2 0xAC
+#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
+#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
+#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
+#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index b8613e8..01eca17 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -111,6 +111,8 @@
__alloc_bootmem_nopanic(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_node(pgdat, x) \
__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_node_nopanic(pgdat, x) \
+ __alloc_bootmem_node_nopanic(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_pages_node(pgdat, x) \
__alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_pages_node_nopanic(pgdat, x) \
diff --git a/include/linux/bsearch.h b/include/linux/bsearch.h
new file mode 100644
index 0000000..90b1aa8
--- /dev/null
+++ b/include/linux/bsearch.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_BSEARCH_H
+#define _LINUX_BSEARCH_H
+
+#include <linux/types.h>
+
+void *bsearch(const void *key, const void *base, size_t num, size_t size,
+ int (*cmp)(const void *key, const void *elt));
+
+#endif /* _LINUX_BSEARCH_H */
diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index 6f70a6d..5ce6b5d 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -44,8 +44,8 @@
/* function prototypes for the CAN networklayer core (af_can.c) */
-extern int can_proto_register(struct can_proto *cp);
-extern void can_proto_unregister(struct can_proto *cp);
+extern int can_proto_register(const struct can_proto *cp);
+extern void can_proto_unregister(const struct can_proto *cp);
extern int can_rx_register(struct net_device *dev, canid_t can_id,
canid_t mask,
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 16ee8b4..4554db0 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -355,7 +355,12 @@
#define CAP_SYSLOG 34
-#define CAP_LAST_CAP CAP_SYSLOG
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM 35
+
+
+#define CAP_LAST_CAP CAP_WAKE_ALARM
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
@@ -546,18 +551,7 @@
extern bool capable(int cap);
extern bool ns_capable(struct user_namespace *ns, int cap);
extern bool task_ns_capable(struct task_struct *t, int cap);
-
-/**
- * nsown_capable - Check superior capability to one's own user_ns
- * @cap: The capability in question
- *
- * Return true if the current task has the given superior capability
- * targeted at its own user namespace.
- */
-static inline bool nsown_capable(int cap)
-{
- return ns_capable(current_user_ns(), cap);
-}
+extern bool nsown_capable(int cap);
/* audit system wants to get cap info from files as well */
extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index fc53492..d6733e2 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -56,46 +56,52 @@
/**
* struct clock_event_device - clock event device descriptor
- * @name: ptr to clock event name
- * @features: features
+ * @event_handler: Assigned by the framework to be called by the low
+ * level handler of the event source
+ * @set_next_event: set next event function
+ * @next_event: local storage for the next event in oneshot mode
* @max_delta_ns: maximum delta value in ns
* @min_delta_ns: minimum delta value in ns
* @mult: nanosecond to cycles multiplier
* @shift: nanoseconds to cycles divisor (power of two)
+ * @mode: operating mode assigned by the management code
+ * @features: features
+ * @retries: number of forced programming retries
+ * @set_mode: set mode function
+ * @broadcast: function to broadcast events
+ * @min_delta_ticks: minimum delta value in ticks stored for reconfiguration
+ * @max_delta_ticks: maximum delta value in ticks stored for reconfiguration
+ * @name: ptr to clock event name
* @rating: variable to rate clock event devices
* @irq: IRQ number (only for non CPU local devices)
* @cpumask: cpumask to indicate for which CPUs this device works
- * @set_next_event: set next event function
- * @set_mode: set mode function
- * @event_handler: Assigned by the framework to be called by the low
- * level handler of the event source
- * @broadcast: function to broadcast events
* @list: list head for the management code
- * @mode: operating mode assigned by the management code
- * @next_event: local storage for the next event in oneshot mode
- * @retries: number of forced programming retries
*/
struct clock_event_device {
- const char *name;
- unsigned int features;
+ void (*event_handler)(struct clock_event_device *);
+ int (*set_next_event)(unsigned long evt,
+ struct clock_event_device *);
+ ktime_t next_event;
u64 max_delta_ns;
u64 min_delta_ns;
u32 mult;
u32 shift;
+ enum clock_event_mode mode;
+ unsigned int features;
+ unsigned long retries;
+
+ void (*broadcast)(const struct cpumask *mask);
+ void (*set_mode)(enum clock_event_mode mode,
+ struct clock_event_device *);
+ unsigned long min_delta_ticks;
+ unsigned long max_delta_ticks;
+
+ const char *name;
int rating;
int irq;
const struct cpumask *cpumask;
- int (*set_next_event)(unsigned long evt,
- struct clock_event_device *);
- void (*set_mode)(enum clock_event_mode mode,
- struct clock_event_device *);
- void (*event_handler)(struct clock_event_device *);
- void (*broadcast)(const struct cpumask *mask);
struct list_head list;
- enum clock_event_mode mode;
- ktime_t next_event;
- unsigned long retries;
-};
+} ____cacheline_aligned;
/*
* Calculate a multiplication factor for scaled math, which is used to convert
@@ -122,6 +128,12 @@
struct clock_event_device *evt);
extern void clockevents_register_device(struct clock_event_device *dev);
+extern void clockevents_config_and_register(struct clock_event_device *dev,
+ u32 freq, unsigned long min_delta,
+ unsigned long max_delta);
+
+extern int clockevents_update_freq(struct clock_event_device *ce, u32 freq);
+
extern void clockevents_exchange_device(struct clock_event_device *old,
struct clock_event_device *new);
extern void clockevents_set_mode(struct clock_event_device *dev,
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c37b21a..d4646b4 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -159,42 +159,38 @@
*/
struct clocksource {
/*
- * First part of structure is read mostly
+ * Hotpath data, fits in a single cache line when the
+ * clocksource itself is cacheline aligned.
*/
- char *name;
- struct list_head list;
- int rating;
cycle_t (*read)(struct clocksource *cs);
- int (*enable)(struct clocksource *cs);
- void (*disable)(struct clocksource *cs);
+ cycle_t cycle_last;
cycle_t mask;
u32 mult;
u32 shift;
u64 max_idle_ns;
- unsigned long flags;
- cycle_t (*vread)(void);
- void (*suspend)(struct clocksource *cs);
- void (*resume)(struct clocksource *cs);
+
#ifdef CONFIG_IA64
void *fsys_mmio; /* used by fsyscall asm code */
#define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr))
#else
#define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0)
#endif
-
- /*
- * Second part is written at each timer interrupt
- * Keep it in a different cache line to dirty no
- * more than one cache line.
- */
- cycle_t cycle_last ____cacheline_aligned_in_smp;
+ const char *name;
+ struct list_head list;
+ int rating;
+ cycle_t (*vread)(void);
+ int (*enable)(struct clocksource *cs);
+ void (*disable)(struct clocksource *cs);
+ unsigned long flags;
+ void (*suspend)(struct clocksource *cs);
+ void (*resume)(struct clocksource *cs);
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
cycle_t wd_last;
#endif
-};
+} ____cacheline_aligned;
/*
* Clock source flags bits::
@@ -341,4 +337,14 @@
extern void timekeeping_notify(struct clocksource *clock);
+extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_down(struct clocksource *);
+
+extern int clocksource_mmio_init(void __iomem *, const char *,
+ unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));
+
+extern int clocksource_i8253_init(void);
+
#endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 9343dd3..11be48e 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001 Russell King
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -56,9 +56,9 @@
#define CPUFREQ_POLICY_POWERSAVE (1)
#define CPUFREQ_POLICY_PERFORMANCE (2)
-/* Frequency values here are CPU kHz so that hardware which doesn't run
- * with some frequencies can complain without having to guess what per
- * cent / per mille means.
+/* Frequency values here are CPU kHz so that hardware which doesn't run
+ * with some frequencies can complain without having to guess what per
+ * cent / per mille means.
* Maximum transition latency is in nanoseconds - if it's unknown,
* CPUFREQ_ETERNAL shall be used.
*/
@@ -72,13 +72,15 @@
struct cpufreq_cpuinfo {
unsigned int max_freq;
unsigned int min_freq;
- unsigned int transition_latency; /* in 10^(-9) s = nanoseconds */
+
+ /* in 10^(-9) s = nanoseconds */
+ unsigned int transition_latency;
};
struct cpufreq_real_policy {
unsigned int min; /* in kHz */
unsigned int max; /* in kHz */
- unsigned int policy; /* see above */
+ unsigned int policy; /* see above */
struct cpufreq_governor *governor; /* see below */
};
@@ -94,7 +96,7 @@
unsigned int max; /* in kHz */
unsigned int cur; /* in kHz, only needed if cpufreq
* governors are used */
- unsigned int policy; /* see above */
+ unsigned int policy; /* see above */
struct cpufreq_governor *governor; /* see below */
struct work_struct update; /* if update_policy() needs to be
@@ -167,11 +169,11 @@
struct cpufreq_governor {
char name[CPUFREQ_NAME_LEN];
- int (*governor) (struct cpufreq_policy *policy,
+ int (*governor) (struct cpufreq_policy *policy,
unsigned int event);
ssize_t (*show_setspeed) (struct cpufreq_policy *policy,
char *buf);
- int (*store_setspeed) (struct cpufreq_policy *policy,
+ int (*store_setspeed) (struct cpufreq_policy *policy,
unsigned int freq);
unsigned int max_transition_latency; /* HW must be able to switch to
next freq faster than this value in nano secs or we
@@ -180,7 +182,8 @@
struct module *owner;
};
-/* pass a target to the cpufreq driver
+/*
+ * Pass a target to the cpufreq driver.
*/
extern int cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
@@ -237,9 +240,9 @@
/* flags */
-#define CPUFREQ_STICKY 0x01 /* the driver isn't removed even if
+#define CPUFREQ_STICKY 0x01 /* the driver isn't removed even if
* all ->init() calls failed */
-#define CPUFREQ_CONST_LOOPS 0x02 /* loops_per_jiffy or other kernel
+#define CPUFREQ_CONST_LOOPS 0x02 /* loops_per_jiffy or other kernel
* "constants" aren't affected by
* frequency transitions */
#define CPUFREQ_PM_NO_WARN 0x04 /* don't warn on suspend/resume speed
@@ -252,7 +255,7 @@
void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state);
-static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max)
+static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max)
{
if (policy->min < min)
policy->min = min;
@@ -386,34 +389,15 @@
/* the following 3 funtions are for cpufreq core use only */
struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
-void cpufreq_cpu_put (struct cpufreq_policy *data);
+void cpufreq_cpu_put(struct cpufreq_policy *data);
/* the following are really really optional */
extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
-void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
+void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
unsigned int cpu);
void cpufreq_frequency_table_put_attr(unsigned int cpu);
-/*********************************************************************
- * UNIFIED DEBUG HELPERS *
- *********************************************************************/
-
-#define CPUFREQ_DEBUG_CORE 1
-#define CPUFREQ_DEBUG_DRIVER 2
-#define CPUFREQ_DEBUG_GOVERNOR 4
-
-#ifdef CONFIG_CPU_FREQ_DEBUG
-
-extern void cpufreq_debug_printk(unsigned int type, const char *prefix,
- const char *fmt, ...);
-
-#else
-
-#define cpufreq_debug_printk(msg...) do { } while(0)
-
-#endif /* CONFIG_CPU_FREQ_DEBUG */
-
#endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 9aeeb0b..be16b61 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -146,6 +146,7 @@
void *security; /* subjective LSM security */
#endif
struct user_struct *user; /* real user ID subscription */
+ struct user_namespace *user_ns; /* cached user->user_ns */
struct group_info *group_info; /* supplementary groups for euid/fsgid */
struct rcu_head rcu; /* RCU deletion hook */
};
@@ -354,10 +355,15 @@
#define current_fsgid() (current_cred_xxx(fsgid))
#define current_cap() (current_cred_xxx(cap_effective))
#define current_user() (current_cred_xxx(user))
-#define _current_user_ns() (current_cred_xxx(user)->user_ns)
#define current_security() (current_cred_xxx(security))
-extern struct user_namespace *current_user_ns(void);
+#ifdef CONFIG_USER_NS
+#define current_user_ns() (current_cred_xxx(user_ns))
+#else
+extern struct user_namespace init_user_ns;
+#define current_user_ns() (&init_user_ns)
+#endif
+
#define current_uid_gid(_uid, _gid) \
do { \
diff --git a/include/linux/device.h b/include/linux/device.h
index ab8dfc0..c66111a 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -47,6 +47,38 @@
struct bus_attribute *);
extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
+/**
+ * struct bus_type - The bus type of the device
+ *
+ * @name: The name of the bus.
+ * @bus_attrs: Default attributes of the bus.
+ * @dev_attrs: Default attributes of the devices on the bus.
+ * @drv_attrs: Default attributes of the device drivers on the bus.
+ * @match: Called, perhaps multiple times, whenever a new device or driver
+ * is added for this bus. It should return a nonzero value if the
+ * given device can be handled by the given driver.
+ * @uevent: Called when a device is added, removed, or a few other things
+ * that generate uevents to add the environment variables.
+ * @probe: Called when a new device or driver add to this bus, and callback
+ * the specific driver's probe to initial the matched device.
+ * @remove: Called when a device removed from this bus.
+ * @shutdown: Called at shut-down time to quiesce the device.
+ * @suspend: Called when a device on this bus wants to go to sleep mode.
+ * @resume: Called to bring a device on this bus out of sleep mode.
+ * @pm: Power management operations of this bus, callback the specific
+ * device driver's pm-ops.
+ * @p: The private data of the driver core, only the driver core can
+ * touch this.
+ *
+ * A bus is a channel between the processor and one or more devices. For the
+ * purposes of the device model, all devices are connected via a bus, even if
+ * it is an internal, virtual, "platform" bus. Buses can plug into each other.
+ * A USB controller is usually a PCI device, for example. The device model
+ * represents the actual connections between buses and the devices they control.
+ * A bus is represented by the bus_type structure. It contains the name, the
+ * default attributes, the bus' methods, PM operations, and the driver core's
+ * private data.
+ */
struct bus_type {
const char *name;
struct bus_attribute *bus_attrs;
@@ -119,6 +151,37 @@
extern struct kset *bus_get_kset(struct bus_type *bus);
extern struct klist *bus_get_device_klist(struct bus_type *bus);
+/**
+ * struct device_driver - The basic device driver structure
+ * @name: Name of the device driver.
+ * @bus: The bus which the device of this driver belongs to.
+ * @owner: The module owner.
+ * @mod_name: Used for built-in modules.
+ * @suppress_bind_attrs: Disables bind/unbind via sysfs.
+ * @of_match_table: The open firmware table.
+ * @probe: Called to query the existence of a specific device,
+ * whether this driver can work with it, and bind the driver
+ * to a specific device.
+ * @remove: Called when the device is removed from the system to
+ * unbind a device from this driver.
+ * @shutdown: Called at shut-down time to quiesce the device.
+ * @suspend: Called to put the device to sleep mode. Usually to a
+ * low power state.
+ * @resume: Called to bring a device from sleep mode.
+ * @groups: Default attributes that get created by the driver core
+ * automatically.
+ * @pm: Power management operations of the device which matched
+ * this driver.
+ * @p: Driver core's private data, no one other than the driver
+ * core can touch this.
+ *
+ * The device driver-model tracks all of the drivers known to the system.
+ * The main reason for this tracking is to enable the driver core to match
+ * up drivers with new devices. Once drivers are known objects within the
+ * system, however, a number of other things become possible. Device drivers
+ * can export information and configuration variables that are independent
+ * of any specific device.
+ */
struct device_driver {
const char *name;
struct bus_type *bus;
@@ -185,8 +248,34 @@
struct device *start, void *data,
int (*match)(struct device *dev, void *data));
-/*
- * device classes
+/**
+ * struct class - device classes
+ * @name: Name of the class.
+ * @owner: The module owner.
+ * @class_attrs: Default attributes of this class.
+ * @dev_attrs: Default attributes of the devices belong to the class.
+ * @dev_bin_attrs: Default binary attributes of the devices belong to the class.
+ * @dev_kobj: The kobject that represents this class and links it into the hierarchy.
+ * @dev_uevent: Called when a device is added, removed from this class, or a
+ * few other things that generate uevents to add the environment
+ * variables.
+ * @devnode: Callback to provide the devtmpfs.
+ * @class_release: Called to release this class.
+ * @dev_release: Called to release the device.
+ * @suspend: Used to put the device to sleep mode, usually to a low power
+ * state.
+ * @resume: Used to bring the device from the sleep mode.
+ * @ns_type: Callbacks so sysfs can detemine namespaces.
+ * @namespace: Namespace of the device belongs to this class.
+ * @pm: The default device power management operations of this class.
+ * @p: The private data of the driver core, no one other than the
+ * driver core can touch this.
+ *
+ * A class is a higher-level view of a device that abstracts out low-level
+ * implementation details. Drivers may see a SCSI disk or an ATA disk, but,
+ * at the class level, they are all simply disks. Classes allow user space
+ * to work with devices based on what they do, rather than how they are
+ * connected or how they work.
*/
struct class {
const char *name;
@@ -401,6 +490,65 @@
unsigned long segment_boundary_mask;
};
+/**
+ * struct device - The basic device structure
+ * @parent: The device's "parent" device, the device to which it is attached.
+ * In most cases, a parent device is some sort of bus or host
+ * controller. If parent is NULL, the device, is a top-level device,
+ * which is not usually what you want.
+ * @p: Holds the private data of the driver core portions of the device.
+ * See the comment of the struct device_private for detail.
+ * @kobj: A top-level, abstract class from which other classes are derived.
+ * @init_name: Initial name of the device.
+ * @type: The type of device.
+ * This identifies the device type and carries type-specific
+ * information.
+ * @mutex: Mutex to synchronize calls to its driver.
+ * @bus: Type of bus device is on.
+ * @driver: Which driver has allocated this
+ * @platform_data: Platform data specific to the device.
+ * Example: For devices on custom boards, as typical of embedded
+ * and SOC based hardware, Linux often uses platform_data to point
+ * to board-specific structures describing devices and how they
+ * are wired. That can include what ports are available, chip
+ * variants, which GPIO pins act in what additional roles, and so
+ * on. This shrinks the "Board Support Packages" (BSPs) and
+ * minimizes board-specific #ifdefs in drivers.
+ * @power: For device power management.
+ * See Documentation/power/devices.txt for details.
+ * @pwr_domain: Provide callbacks that are executed during system suspend,
+ * hibernation, system resume and during runtime PM transitions
+ * along with subsystem-level and driver-level callbacks.
+ * @numa_node: NUMA node this device is close to.
+ * @dma_mask: Dma mask (if dma'ble device).
+ * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
+ * hardware supports 64-bit addresses for consistent allocations
+ * such descriptors.
+ * @dma_parms: A low level driver may set these to teach IOMMU code about
+ * segment limitations.
+ * @dma_pools: Dma pools (if dma'ble device).
+ * @dma_mem: Internal for coherent mem override.
+ * @archdata: For arch-specific additions.
+ * @of_node: Associated device tree node.
+ * @of_match: Matching of_device_id from driver.
+ * @devt: For creating the sysfs "dev".
+ * @devres_lock: Spinlock to protect the resource of the device.
+ * @devres_head: The resources list of the device.
+ * @knode_class: The node used to add the device to the class list.
+ * @class: The class of the device.
+ * @groups: Optional attribute groups.
+ * @release: Callback to free the device after all references have
+ * gone away. This should be set by the allocator of the
+ * device (i.e. the bus driver that discovered the device).
+ *
+ * At the lowest level, every device in a Linux system is represented by an
+ * instance of struct device. The device structure contains the information
+ * that the device model core needs to model the system. Most subsystems,
+ * however, track additional information about the devices they host. As a
+ * result, it is rare for devices to be represented by bare device structures;
+ * instead, that structure, like kobject structures, is usually embedded within
+ * a higher-level representation of the device.
+ */
struct device {
struct device *parent;
@@ -408,7 +556,7 @@
struct kobject kobj;
const char *init_name; /* initial name of the device */
- struct device_type *type;
+ const struct device_type *type;
struct mutex mutex; /* mutex to synchronize calls to
* its driver.
@@ -442,7 +590,6 @@
struct dev_archdata archdata;
struct device_node *of_node; /* associated device tree node */
- const struct of_device_id *of_match; /* matching of_device_id from driver */
dev_t devt; /* dev_t, creates the sysfs "dev" */
@@ -557,7 +704,7 @@
extern const char *device_get_devnode(struct device *dev,
mode_t *mode, const char **tmp);
extern void *dev_get_drvdata(const struct device *dev);
-extern void dev_set_drvdata(struct device *dev, void *data);
+extern int dev_set_drvdata(struct device *dev, void *data);
/*
* Root device objects for grouping under /sys/devices
@@ -611,7 +758,7 @@
extern int (*platform_notify_remove)(struct device *dev);
-/**
+/*
* get_device - atomically increment the reference count for the device.
*
*/
@@ -633,13 +780,6 @@
/* drivers/base/power/shutdown.c */
extern void device_shutdown(void);
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-/* drivers/base/sys.c */
-extern void sysdev_shutdown(void);
-#else
-static inline void sysdev_shutdown(void) { }
-#endif
-
/* debugging and troubleshooting/diagnostic helpers. */
extern const char *dev_driver_string(const struct device *dev);
@@ -742,13 +882,17 @@
#endif
/*
- * dev_WARN() acts like dev_printk(), but with the key difference
+ * dev_WARN*() acts like dev_printk(), but with the key difference
* of using a WARN/WARN_ON to get the message out, including the
* file/line information and a backtrace.
*/
#define dev_WARN(dev, format, arg...) \
WARN(1, "Device: %s\n" format, dev_driver_string(dev), ## arg);
+#define dev_WARN_ONCE(dev, condition, format, arg...) \
+ WARN_ONCE(condition, "Device %s\n" format, \
+ dev_driver_string(dev), ## arg)
+
/* Create alias, so I can be autoloaded. */
#define MODULE_ALIAS_CHARDEV(major,minor) \
MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index 0c9653f..e747ecd 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -1,8 +1,6 @@
#ifndef _DYNAMIC_DEBUG_H
#define _DYNAMIC_DEBUG_H
-#include <linux/jump_label.h>
-
/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which
* bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
* use independent hash functions, to reduce the chance of false positives.
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index dc80d82..c6a850a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -24,7 +24,10 @@
__u32 cmd;
__u32 supported; /* Features this interface supports */
__u32 advertising; /* Features this interface advertises */
- __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
+ __u16 speed; /* The forced speed (lower bits) in
+ * Mbps. Please use
+ * ethtool_cmd_speed()/_set() to
+ * access it */
__u8 duplex; /* Duplex, half or full */
__u8 port; /* Which connector port */
__u8 phy_address;
@@ -33,7 +36,10 @@
__u8 mdio_support;
__u32 maxtxpkt; /* Tx pkts before generating tx int */
__u32 maxrxpkt; /* Rx pkts before generating rx int */
- __u16 speed_hi;
+ __u16 speed_hi; /* The forced speed (upper
+ * bits) in Mbps. Please use
+ * ethtool_cmd_speed()/_set() to
+ * access it */
__u8 eth_tp_mdix;
__u8 reserved2;
__u32 lp_advertising; /* Features the link partner advertises */
@@ -41,14 +47,14 @@
};
static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
- __u32 speed)
+ __u32 speed)
{
ep->speed = (__u16)speed;
ep->speed_hi = (__u16)(speed >> 16);
}
-static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
{
return (ep->speed_hi << 16) | ep->speed;
}
@@ -229,6 +235,34 @@
__u32 tx_pending;
};
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ * support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+ __u32 cmd;
+ __u32 max_rx;
+ __u32 max_tx;
+ __u32 max_other;
+ __u32 max_combined;
+ __u32 rx_count;
+ __u32 tx_count;
+ __u32 other_count;
+ __u32 combined_count;
+};
+
/* for configuring link flow control parameters */
struct ethtool_pauseparam {
__u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
@@ -380,27 +414,42 @@
__u8 proto;
};
+union ethtool_flow_union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[60];
+};
+
+struct ethtool_flow_ext {
+ __be16 vlan_etype;
+ __be16 vlan_tci;
+ __be32 data[2];
+};
+
/**
* struct ethtool_rx_flow_spec - specification for RX flow filter
* @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
* @h_u: Flow fields to match (dependent on @flow_type)
- * @m_u: Masks for flow field bits to be ignored
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ * Note, all additional fields must be ignored unless @flow_type
+ * includes the %FLOW_EXT flag.
* @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
* if packets should be discarded
* @location: Index of filter in hardware table
*/
struct ethtool_rx_flow_spec {
__u32 flow_type;
- union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[72];
- } h_u, m_u;
+ union ethtool_flow_union h_u;
+ struct ethtool_flow_ext h_ext;
+ union ethtool_flow_union m_u;
+ struct ethtool_flow_ext m_ext;
__u64 ring_cookie;
__u32 location;
};
@@ -458,16 +507,10 @@
struct compat_ethtool_rx_flow_spec {
u32 flow_type;
- union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- u8 hdata[72];
- } h_u, m_u;
+ union ethtool_flow_union h_u;
+ struct ethtool_flow_ext h_ext;
+ union ethtool_flow_union m_u;
+ struct ethtool_flow_ext m_ext;
compat_u64 ring_cookie;
u32 location;
};
@@ -558,6 +601,26 @@
char data[ETHTOOL_FLASH_MAX_FILENAME];
};
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * %ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * get and filled in by ethtool for set operation
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+ __u32 cmd;
+ __u32 version;
+ __u32 flag;
+ __u32 len;
+ __u8 data[0];
+};
+
/* for returning and changing feature sets */
/**
@@ -663,6 +726,22 @@
unsigned int count;
};
+/**
+ * enum ethtool_phys_id_state - indicator state for physical identification
+ * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
+ * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
+ * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
+ * is not supported)
+ * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
+ * is not supported)
+ */
+enum ethtool_phys_id_state {
+ ETHTOOL_ID_INACTIVE,
+ ETHTOOL_ID_ACTIVE,
+ ETHTOOL_ID_ON,
+ ETHTOOL_ID_OFF
+};
+
struct net_device;
/* Some generic methods drivers may use in their ethtool_ops */
@@ -683,63 +762,131 @@
bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
/**
- * ðtool_ops - Alter and report network device settings
- * get_settings: Get device-specific settings
- * set_settings: Set device-specific settings
- * get_drvinfo: Report driver information
- * get_regs: Get device registers
- * get_wol: Report whether Wake-on-Lan is enabled
- * set_wol: Turn Wake-on-Lan on or off
- * get_msglevel: Report driver message level
- * set_msglevel: Set driver message level
- * nway_reset: Restart autonegotiation
- * get_link: Get link status
- * get_eeprom: Read data from the device EEPROM
- * set_eeprom: Write data to the device EEPROM
- * get_coalesce: Get interrupt coalescing parameters
- * set_coalesce: Set interrupt coalescing parameters
- * get_ringparam: Report ring sizes
- * set_ringparam: Set ring sizes
- * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause parameters
- * get_rx_csum: Report whether receive checksums are turned on or off
- * set_rx_csum: Turn receive checksum on or off
- * get_tx_csum: Report whether transmit checksums are turned on or off
- * set_tx_csum: Turn transmit checksums on or off
- * get_sg: Report whether scatter-gather is enabled
- * set_sg: Turn scatter-gather on or off
- * get_tso: Report whether TCP segmentation offload is enabled
- * set_tso: Turn TCP segmentation offload on or off
- * get_ufo: Report whether UDP fragmentation offload is enabled
- * set_ufo: Turn UDP fragmentation offload on or off
- * self_test: Run specified self-tests
- * get_strings: Return a set of strings that describe the requested objects
- * phys_id: Identify the device
- * get_stats: Return statistics about the device
- * get_flags: get 32-bit flags bitmap
- * set_flags: set 32-bit flags bitmap
- *
- * Description:
- *
- * get_settings:
- * @get_settings is passed an ðtool_cmd to fill in. It returns
- * an negative errno or zero.
- *
- * set_settings:
- * @set_settings is passed an ðtool_cmd and should attempt to set
- * all the settings this device supports. It may return an error value
- * if something goes wrong (otherwise 0).
- *
- * get_eeprom:
+ * struct ethtool_ops - optional netdev operations
+ * @get_settings: Get various device settings including Ethernet link
+ * settings. The @cmd parameter is expected to have been cleared
+ * before get_settings is called. Returns a negative error code or
+ * zero.
+ * @set_settings: Set various device settings including Ethernet link
+ * settings. Returns a negative error code or zero.
+ * @get_drvinfo: Report driver/device information. Should only set the
+ * @driver, @version, @fw_version and @bus_info fields. If not
+ * implemented, the @driver and @bus_info fields will be filled in
+ * according to the netdev's parent device.
+ * @get_regs_len: Get buffer length required for @get_regs
+ * @get_regs: Get device registers
+ * @get_wol: Report whether Wake-on-Lan is enabled
+ * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code
+ * or zero.
+ * @get_msglevel: Report driver message level. This should be the value
+ * of the @msg_enable field used by netif logging functions.
+ * @set_msglevel: Set driver message level
+ * @nway_reset: Restart autonegotiation. Returns a negative error code
+ * or zero.
+ * @get_link: Report whether physical link is up. Will only be called if
+ * the netdev is up. Should usually be set to ethtool_op_get_link(),
+ * which uses netif_carrier_ok().
+ * @get_eeprom: Read data from the device EEPROM.
* Should fill in the magic field. Don't need to check len for zero
* or wraparound. Fill in the data argument with the eeprom values
* from offset to offset + len. Update len to the amount read.
* Returns an error or zero.
- *
- * set_eeprom:
+ * @set_eeprom: Write data to the device EEPROM.
* Should validate the magic field. Don't need to check len for zero
* or wraparound. Update len to the amount written. Returns an error
* or zero.
+ * @get_coalesce: Get interrupt coalescing parameters. Returns a negative
+ * error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters. Returns a negative
+ * error code or zero.
+ * @get_ringparam: Report ring sizes
+ * @set_ringparam: Set ring sizes. Returns a negative error code or zero.
+ * @get_pauseparam: Report pause parameters
+ * @set_pauseparam: Set pause parameters. Returns a negative error code
+ * or zero.
+ * @get_rx_csum: Deprecated in favour of the netdev feature %NETIF_F_RXCSUM.
+ * Report whether receive checksums are turned on or off.
+ * @set_rx_csum: Deprecated in favour of generic netdev features. Turn
+ * receive checksum on or off. Returns a negative error code or zero.
+ * @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
+ * are turned on or off.
+ * @set_tx_csum: Deprecated in favour of generic netdev features. Turn
+ * transmit checksums on or off. Returns a egative error code or zero.
+ * @get_sg: Deprecated as redundant. Report whether scatter-gather is
+ * enabled.
+ * @set_sg: Deprecated in favour of generic netdev features. Turn
+ * scatter-gather on or off. Returns a negative error code or zero.
+ * @get_tso: Deprecated as redundant. Report whether TCP segmentation
+ * offload is enabled.
+ * @set_tso: Deprecated in favour of generic netdev features. Turn TCP
+ * segmentation offload on or off. Returns a negative error code or zero.
+ * @self_test: Run specified self-tests
+ * @get_strings: Return a set of strings that describe the requested objects
+ * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
+ * attached to it. The implementation may update the indicator
+ * asynchronously or synchronously, but in either case it must return
+ * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE,
+ * and must either activate asynchronous updates and return zero, return
+ * a negative error or return a positive frequency for synchronous
+ * indication (e.g. 1 for one on/off cycle per second). If it returns
+ * a frequency then it will be called again at intervals with the
+ * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
+ * the indicator accordingly. Finally, it is called with the argument
+ * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a
+ * negative error code or zero.
+ * @get_ethtool_stats: Return extended statistics about the device.
+ * This is only useful if the device maintains statistics not
+ * included in &struct rtnl_link_stats64.
+ * @begin: Function to be called before any other operation. Returns a
+ * negative error code or zero.
+ * @complete: Function to be called after any other operation except
+ * @begin. Will be called even if the other operation failed.
+ * @get_ufo: Deprecated as redundant. Report whether UDP fragmentation
+ * offload is enabled.
+ * @set_ufo: Deprecated in favour of generic netdev features. Turn UDP
+ * fragmentation offload on or off. Returns a negative error code or zero.
+ * @get_flags: Deprecated as redundant. Report features included in
+ * &enum ethtool_flags that are enabled.
+ * @set_flags: Deprecated in favour of generic netdev features. Turn
+ * features included in &enum ethtool_flags on or off. Returns a
+ * negative error code or zero.
+ * @get_priv_flags: Report driver-specific feature flags.
+ * @set_priv_flags: Set driver-specific feature flags. Returns a negative
+ * error code or zero.
+ * @get_sset_count: Get number of strings that @get_strings will write.
+ * @get_rxnfc: Get RX flow classification rules. Returns a negative
+ * error code or zero.
+ * @set_rxnfc: Set RX flow classification rules. Returns a negative
+ * error code or zero.
+ * @flash_device: Write a firmware image to device's flash memory.
+ * Returns a negative error code or zero.
+ * @reset: Reset (part of) the device, as specified by a bitmask of
+ * flags from &enum ethtool_reset_flags. Returns a negative
+ * error code or zero.
+ * @set_rx_ntuple: Set an RX n-tuple rule. Returns a negative error code
+ * or zero.
+ * @get_rx_ntuple: Deprecated.
+ * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
+ * Returns a negative error code or zero.
+ * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
+ * Returns a negative error code or zero.
+ * @get_channels: Get number of channels.
+ * @set_channels: Set number of channels. Returns a negative error code or
+ * zero.
+ * @get_dump_flag: Get dump flag indicating current dump length, version,
+ * and flag of the device.
+ * @get_dump_data: Get dump data.
+ * @set_dump: Set dump specific flags to the device.
+ *
+ * All operations are optional (i.e. the function pointer may be set
+ * to %NULL) and callers must take this into account. Callers must
+ * hold the RTNL, except that for @get_drvinfo the caller may or may
+ * not hold the RTNL.
+ *
+ * See the structures used by these operations for further documentation.
+ *
+ * See &struct net_device and &struct net_device_ops for documentation
+ * of the generic netdev features interface.
*/
struct ethtool_ops {
int (*get_settings)(struct net_device *, struct ethtool_cmd *);
@@ -778,7 +925,7 @@
int (*set_tso)(struct net_device *, u32);
void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
void (*get_strings)(struct net_device *, u32 stringset, u8 *);
- int (*phys_id)(struct net_device *, u32);
+ int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
void (*get_ethtool_stats)(struct net_device *,
struct ethtool_stats *, u64 *);
int (*begin)(struct net_device *);
@@ -802,6 +949,13 @@
struct ethtool_rxfh_indir *);
int (*set_rxfh_indir)(struct net_device *,
const struct ethtool_rxfh_indir *);
+ void (*get_channels)(struct net_device *, struct ethtool_channels *);
+ int (*set_channels)(struct net_device *, struct ethtool_channels *);
+ int (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
+ int (*get_dump_data)(struct net_device *,
+ struct ethtool_dump *, void *);
+ int (*set_dump)(struct net_device *, struct ethtool_dump *);
+
};
#endif /* __KERNEL__ */
@@ -870,6 +1024,11 @@
#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
@@ -897,6 +1056,8 @@
#define SUPPORTED_10000baseKX4_Full (1 << 18)
#define SUPPORTED_10000baseKR_Full (1 << 19)
#define SUPPORTED_10000baseR_FEC (1 << 20)
+#define SUPPORTED_20000baseMLD2_Full (1 << 21)
+#define SUPPORTED_20000baseKR2_Full (1 << 22)
/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
@@ -920,6 +1081,8 @@
#define ADVERTISED_10000baseKX4_Full (1 << 18)
#define ADVERTISED_10000baseKR_Full (1 << 19)
#define ADVERTISED_10000baseR_FEC (1 << 20)
+#define ADVERTISED_20000baseMLD2_Full (1 << 21)
+#define ADVERTISED_20000baseKR2_Full (1 << 22)
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
@@ -992,6 +1155,8 @@
#define IPV4_FLOW 0x10 /* hash only */
#define IPV6_FLOW 0x11 /* hash only */
#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define FLOW_EXT 0x80000000
/* L3-L4 network traffic flow hash options */
#define RXH_L2DA (1 << 1)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index df728c1..6a82748 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -832,6 +832,7 @@
#define FBINFO_CAN_FORCE_OUTPUT 0x200000
struct fb_info {
+ atomic_t count;
int node;
int flags;
struct mutex lock; /* Lock for open/release/ioctl funcs */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 45266b7..4609b85 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -135,6 +135,8 @@
{
atomic_t refcnt;
unsigned int len; /* Number of filter blocks */
+ unsigned int (*bpf_func)(const struct sk_buff *skb,
+ const struct sock_filter *filter);
struct rcu_head rcu;
struct sock_filter insns[0];
};
@@ -153,6 +155,80 @@
extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
extern int sk_detach_filter(struct sock *sk);
extern int sk_chk_filter(struct sock_filter *filter, int flen);
+
+#ifdef CONFIG_BPF_JIT
+extern void bpf_jit_compile(struct sk_filter *fp);
+extern void bpf_jit_free(struct sk_filter *fp);
+#define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
+#else
+static inline void bpf_jit_compile(struct sk_filter *fp)
+{
+}
+static inline void bpf_jit_free(struct sk_filter *fp)
+{
+}
+#define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
+#endif
+
+enum {
+ BPF_S_RET_K = 1,
+ BPF_S_RET_A,
+ BPF_S_ALU_ADD_K,
+ BPF_S_ALU_ADD_X,
+ BPF_S_ALU_SUB_K,
+ BPF_S_ALU_SUB_X,
+ BPF_S_ALU_MUL_K,
+ BPF_S_ALU_MUL_X,
+ BPF_S_ALU_DIV_X,
+ BPF_S_ALU_AND_K,
+ BPF_S_ALU_AND_X,
+ BPF_S_ALU_OR_K,
+ BPF_S_ALU_OR_X,
+ BPF_S_ALU_LSH_K,
+ BPF_S_ALU_LSH_X,
+ BPF_S_ALU_RSH_K,
+ BPF_S_ALU_RSH_X,
+ BPF_S_ALU_NEG,
+ BPF_S_LD_W_ABS,
+ BPF_S_LD_H_ABS,
+ BPF_S_LD_B_ABS,
+ BPF_S_LD_W_LEN,
+ BPF_S_LD_W_IND,
+ BPF_S_LD_H_IND,
+ BPF_S_LD_B_IND,
+ BPF_S_LD_IMM,
+ BPF_S_LDX_W_LEN,
+ BPF_S_LDX_B_MSH,
+ BPF_S_LDX_IMM,
+ BPF_S_MISC_TAX,
+ BPF_S_MISC_TXA,
+ BPF_S_ALU_DIV_K,
+ BPF_S_LD_MEM,
+ BPF_S_LDX_MEM,
+ BPF_S_ST,
+ BPF_S_STX,
+ BPF_S_JMP_JA,
+ BPF_S_JMP_JEQ_K,
+ BPF_S_JMP_JEQ_X,
+ BPF_S_JMP_JGE_K,
+ BPF_S_JMP_JGE_X,
+ BPF_S_JMP_JGT_K,
+ BPF_S_JMP_JGT_X,
+ BPF_S_JMP_JSET_K,
+ BPF_S_JMP_JSET_X,
+ /* Ancillary data */
+ BPF_S_ANC_PROTOCOL,
+ BPF_S_ANC_PKTTYPE,
+ BPF_S_ANC_IFINDEX,
+ BPF_S_ANC_NLATTR,
+ BPF_S_ANC_NLATTR_NEST,
+ BPF_S_ANC_MARK,
+ BPF_S_ANC_QUEUE,
+ BPF_S_ANC_HATYPE,
+ BPF_S_ANC_RXHASH,
+ BPF_S_ANC_CPU,
+};
+
#endif /* __KERNEL__ */
#endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index c64f368..5e6f427 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -125,7 +125,6 @@
struct delayed_work bm_work; /* bus manager job */
int bm_retries;
int bm_generation;
- __be32 bm_transaction_data[2];
int bm_node_id;
bool bm_abdicate;
@@ -441,12 +440,15 @@
struct fw_iso_packet *packet,
struct fw_iso_buffer *buffer,
unsigned long payload);
+void fw_iso_context_queue_flush(struct fw_iso_context *ctx);
int fw_iso_context_start(struct fw_iso_context *ctx,
int cycle, int sync, int tags);
int fw_iso_context_stop(struct fw_iso_context *ctx);
void fw_iso_context_destroy(struct fw_iso_context *ctx);
void fw_iso_resource_manage(struct fw_card *card, int generation,
u64 channels_mask, int *channel, int *bandwidth,
- bool allocate, __be32 buffer[2]);
+ bool allocate);
+
+extern struct workqueue_struct *fw_workqueue;
#endif /* _LINUX_FIREWIRE_H */
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
index 70e4efa..ebeb2f3 100644
--- a/include/linux/flex_array.h
+++ b/include/linux/flex_array.h
@@ -61,7 +61,7 @@
struct flex_array *flex_array_alloc(int element_size, unsigned int total,
gfp_t flags);
int flex_array_prealloc(struct flex_array *fa, unsigned int start,
- unsigned int end, gfp_t flags);
+ unsigned int nr_elements, gfp_t flags);
void flex_array_free(struct flex_array *fa);
void flex_array_free_parts(struct flex_array *fa);
int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
diff --git a/include/linux/fs.h b/include/linux/fs.h
index dbd860a..cdf9495 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -358,7 +358,6 @@
#define FS_EXTENT_FL 0x00080000 /* Extents */
#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
-#define FS_COW_FL 0x02000000 /* Cow file */
#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index ca29e03..9d88e1c 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -29,9 +29,22 @@
typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
+struct ftrace_hash;
+
+enum {
+ FTRACE_OPS_FL_ENABLED = 1 << 0,
+ FTRACE_OPS_FL_GLOBAL = 1 << 1,
+ FTRACE_OPS_FL_DYNAMIC = 1 << 2,
+};
+
struct ftrace_ops {
- ftrace_func_t func;
- struct ftrace_ops *next;
+ ftrace_func_t func;
+ struct ftrace_ops *next;
+ unsigned long flags;
+#ifdef CONFIG_DYNAMIC_FTRACE
+ struct ftrace_hash *notrace_hash;
+ struct ftrace_hash *filter_hash;
+#endif
};
extern int function_trace_stop;
@@ -146,14 +159,13 @@
extern int ftrace_text_reserved(void *start, void *end);
enum {
- FTRACE_FL_FREE = (1 << 0),
- FTRACE_FL_FAILED = (1 << 1),
- FTRACE_FL_FILTER = (1 << 2),
- FTRACE_FL_ENABLED = (1 << 3),
- FTRACE_FL_NOTRACE = (1 << 4),
- FTRACE_FL_CONVERTED = (1 << 5),
+ FTRACE_FL_ENABLED = (1 << 30),
+ FTRACE_FL_FREE = (1 << 31),
};
+#define FTRACE_FL_MASK (0x3UL << 30)
+#define FTRACE_REF_MAX ((1 << 30) - 1)
+
struct dyn_ftrace {
union {
unsigned long ip; /* address of mcount call-site */
@@ -167,7 +179,12 @@
};
int ftrace_force_update(void);
-void ftrace_set_filter(unsigned char *buf, int len, int reset);
+void ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
+ int len, int reset);
+void ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
+ int len, int reset);
+void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
+void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
int register_ftrace_command(struct ftrace_func_command *cmd);
int unregister_ftrace_command(struct ftrace_func_command *cmd);
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 22b32af..b5a550a 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -37,6 +37,7 @@
unsigned char flags;
unsigned char preempt_count;
int pid;
+ int padding;
};
#define FTRACE_MAX_EVENT \
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index bfb8f93..56d8fc8 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -353,6 +353,8 @@
void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
void free_pages_exact(void *virt, size_t size);
+/* This is different from alloc_pages_exact_node !!! */
+void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask);
#define __get_free_page(gfp_mask) \
__get_free_pages((gfp_mask), 0)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 2d1c611..b2eee58 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -884,6 +884,15 @@
#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
+/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
+#define IEEE80211_HT_EXT_CAP_PCO 0x0001
+#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006
+#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1
+#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300
+#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8
+#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400
+#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800
+
/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
@@ -993,6 +1002,11 @@
#define WLAN_CAPABILITY_ESS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
+
+/* A mesh STA sets the ESS and IBSS capability bits to zero */
+#define WLAN_CAPABILITY_IS_MBSS(cap) \
+ (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
#define WLAN_CAPABILITY_PRIVACY (1<<4)
@@ -1252,9 +1266,8 @@
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
WLAN_CATEGORY_SELF_PROTECTED = 15,
WLAN_CATEGORY_WMM = 17,
- /* TODO: remove MESH_PLINK and MESH_PATH_SEL after */
- /* mesh is updated to current 802.11s draft */
- WLAN_CATEGORY_MESH_PLINK = 30,
+ /* TODO: remove MESH_PATH_SEL after mesh is updated
+ * to current 802.11s draft */
WLAN_CATEGORY_MESH_PATH_SEL = 32,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
@@ -1507,6 +1520,7 @@
category = ((u8 *) hdr) + 24;
return *category != WLAN_CATEGORY_PUBLIC &&
*category != WLAN_CATEGORY_HT &&
+ *category != WLAN_CATEGORY_SELF_PROTECTED &&
*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
}
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index be69043..0f1325d 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -136,6 +136,7 @@
extern struct ctl_table ether_table[];
#endif
+int mac_pton(const char *s, u8 *mac);
extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
#endif
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 635e1fa..290bd8a 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -86,7 +86,6 @@
* the vlan is attached to.
*/
unsigned int nr_vlans;
- int killall;
struct hlist_node hlist; /* linked list */
struct net_device **vlan_devices_arrays[VLAN_GROUP_ARRAY_SPLIT_PARTS];
struct rcu_head rcu;
@@ -132,7 +131,8 @@
extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
u16 vlan_tci, int polling);
-extern bool vlan_hwaccel_do_receive(struct sk_buff **skb);
+extern bool vlan_do_receive(struct sk_buff **skb);
+extern struct sk_buff *vlan_untag(struct sk_buff *skb);
extern gro_result_t
vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci, struct sk_buff *skb);
@@ -166,13 +166,18 @@
return NET_XMIT_SUCCESS;
}
-static inline bool vlan_hwaccel_do_receive(struct sk_buff **skb)
+static inline bool vlan_do_receive(struct sk_buff **skb)
{
if ((*skb)->vlan_tci & VLAN_VID_MASK)
(*skb)->pkt_type = PACKET_OTHERHOST;
return false;
}
+static inline struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+ return skb;
+}
+
static inline gro_result_t
vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci, struct sk_buff *skb)
diff --git a/include/linux/init.h b/include/linux/init.h
index 577671c..9146f39 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -79,29 +79,29 @@
#define __exitused __used
#endif
-#define __exit __section(.exit.text) __exitused __cold
+#define __exit __section(.exit.text) __exitused __cold notrace
/* Used for HOTPLUG */
-#define __devinit __section(.devinit.text) __cold
+#define __devinit __section(.devinit.text) __cold notrace
#define __devinitdata __section(.devinit.data)
#define __devinitconst __section(.devinit.rodata)
-#define __devexit __section(.devexit.text) __exitused __cold
+#define __devexit __section(.devexit.text) __exitused __cold notrace
#define __devexitdata __section(.devexit.data)
#define __devexitconst __section(.devexit.rodata)
/* Used for HOTPLUG_CPU */
-#define __cpuinit __section(.cpuinit.text) __cold
+#define __cpuinit __section(.cpuinit.text) __cold notrace
#define __cpuinitdata __section(.cpuinit.data)
#define __cpuinitconst __section(.cpuinit.rodata)
-#define __cpuexit __section(.cpuexit.text) __exitused __cold
+#define __cpuexit __section(.cpuexit.text) __exitused __cold notrace
#define __cpuexitdata __section(.cpuexit.data)
#define __cpuexitconst __section(.cpuexit.rodata)
/* Used for MEMORY_HOTPLUG */
-#define __meminit __section(.meminit.text) __cold
+#define __meminit __section(.meminit.text) __cold notrace
#define __meminitdata __section(.meminit.data)
#define __meminitconst __section(.meminit.rodata)
-#define __memexit __section(.memexit.text) __exitused __cold
+#define __memexit __section(.memexit.text) __exitused __cold notrace
#define __memexitdata __section(.memexit.data)
#define __memexitconst __section(.memexit.rodata)
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index caa151f..689496b 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -134,7 +134,6 @@
.stack = &init_thread_info, \
.usage = ATOMIC_INIT(2), \
.flags = PF_KTHREAD, \
- .lock_depth = -1, \
.prio = MAX_PRIO-20, \
.static_prio = MAX_PRIO-20, \
.normal_prio = MAX_PRIO-20, \
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index bea0ac7..6c12989 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -414,7 +414,6 @@
TASKLET_SOFTIRQ,
SCHED_SOFTIRQ,
HRTIMER_SOFTIRQ,
- RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
NR_SOFTIRQS
};
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 09a3080..8b45384 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -53,12 +53,13 @@
* Bits which can be modified via irq_set/clear/modify_status_flags()
* IRQ_LEVEL - Interrupt is level type. Will be also
* updated in the code when the above trigger
- * bits are modified via set_irq_type()
+ * bits are modified via irq_set_irq_type()
* IRQ_PER_CPU - Mark an interrupt PER_CPU. Will protect
* it from affinity setting
* IRQ_NOPROBE - Interrupt cannot be probed by autoprobing
* IRQ_NOREQUEST - Interrupt cannot be requested via
* request_irq()
+ * IRQ_NOTHREAD - Interrupt cannot be threaded
* IRQ_NOAUTOEN - Interrupt is not automatically enabled in
* request/setup_irq()
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
@@ -85,6 +86,7 @@
IRQ_NO_BALANCING = (1 << 13),
IRQ_MOVE_PCNTXT = (1 << 14),
IRQ_NESTED_THREAD = (1 << 15),
+ IRQ_NOTHREAD = (1 << 16),
};
#define IRQF_MODIFY_MASK \
@@ -261,23 +263,6 @@
* struct irq_chip - hardware interrupt chip descriptor
*
* @name: name for /proc/interrupts
- * @startup: deprecated, replaced by irq_startup
- * @shutdown: deprecated, replaced by irq_shutdown
- * @enable: deprecated, replaced by irq_enable
- * @disable: deprecated, replaced by irq_disable
- * @ack: deprecated, replaced by irq_ack
- * @mask: deprecated, replaced by irq_mask
- * @mask_ack: deprecated, replaced by irq_mask_ack
- * @unmask: deprecated, replaced by irq_unmask
- * @eoi: deprecated, replaced by irq_eoi
- * @end: deprecated, will go away with __do_IRQ()
- * @set_affinity: deprecated, replaced by irq_set_affinity
- * @retrigger: deprecated, replaced by irq_retrigger
- * @set_type: deprecated, replaced by irq_set_type
- * @set_wake: deprecated, replaced by irq_wake
- * @bus_lock: deprecated, replaced by irq_bus_lock
- * @bus_sync_unlock: deprecated, replaced by irq_bus_sync_unlock
- *
* @irq_startup: start up the interrupt (defaults to ->enable if NULL)
* @irq_shutdown: shut down the interrupt (defaults to ->disable if NULL)
* @irq_enable: enable the interrupt (defaults to chip->unmask if NULL)
@@ -295,6 +280,9 @@
* @irq_bus_sync_unlock:function to sync and unlock slow bus (i2c) chips
* @irq_cpu_online: configure an interrupt source for a secondary CPU
* @irq_cpu_offline: un-configure an interrupt source for a secondary CPU
+ * @irq_suspend: function called from core code on suspend once per chip
+ * @irq_resume: function called from core code on resume once per chip
+ * @irq_pm_shutdown: function called from core code on shutdown once per chip
* @irq_print_chip: optional to print special chip info in show_interrupts
* @flags: chip specific flags
*
@@ -324,6 +312,10 @@
void (*irq_cpu_online)(struct irq_data *data);
void (*irq_cpu_offline)(struct irq_data *data);
+ void (*irq_suspend)(struct irq_data *data);
+ void (*irq_resume)(struct irq_data *data);
+ void (*irq_pm_shutdown)(struct irq_data *data);
+
void (*irq_print_chip)(struct irq_data *data, struct seq_file *p);
unsigned long flags;
@@ -439,7 +431,7 @@
/*
* Set a highlevel chained flow handler for a given IRQ.
* (a chained handler is automatically enabled and set to
- * IRQ_NOREQUEST and IRQ_NOPROBE)
+ * IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD)
*/
static inline void
irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle)
@@ -469,6 +461,16 @@
irq_modify_status(irq, IRQ_NOPROBE, 0);
}
+static inline void irq_set_nothread(unsigned int irq)
+{
+ irq_modify_status(irq, 0, IRQ_NOTHREAD);
+}
+
+static inline void irq_set_thread(unsigned int irq)
+{
+ irq_modify_status(irq, IRQ_NOTHREAD, 0);
+}
+
static inline void irq_set_nested_thread(unsigned int irq, bool nest)
{
if (nest)
@@ -573,6 +575,145 @@
return irq_reserve_irqs(irq, 1);
}
+#ifndef irq_reg_writel
+# define irq_reg_writel(val, addr) writel(val, addr)
+#endif
+#ifndef irq_reg_readl
+# define irq_reg_readl(addr) readl(addr)
+#endif
+
+/**
+ * struct irq_chip_regs - register offsets for struct irq_gci
+ * @enable: Enable register offset to reg_base
+ * @disable: Disable register offset to reg_base
+ * @mask: Mask register offset to reg_base
+ * @ack: Ack register offset to reg_base
+ * @eoi: Eoi register offset to reg_base
+ * @type: Type configuration register offset to reg_base
+ * @polarity: Polarity configuration register offset to reg_base
+ */
+struct irq_chip_regs {
+ unsigned long enable;
+ unsigned long disable;
+ unsigned long mask;
+ unsigned long ack;
+ unsigned long eoi;
+ unsigned long type;
+ unsigned long polarity;
+};
+
+/**
+ * struct irq_chip_type - Generic interrupt chip instance for a flow type
+ * @chip: The real interrupt chip which provides the callbacks
+ * @regs: Register offsets for this chip
+ * @handler: Flow handler associated with this chip
+ * @type: Chip can handle these flow types
+ *
+ * A irq_generic_chip can have several instances of irq_chip_type when
+ * it requires different functions and register offsets for different
+ * flow types.
+ */
+struct irq_chip_type {
+ struct irq_chip chip;
+ struct irq_chip_regs regs;
+ irq_flow_handler_t handler;
+ u32 type;
+};
+
+/**
+ * struct irq_chip_generic - Generic irq chip data structure
+ * @lock: Lock to protect register and cache data access
+ * @reg_base: Register base address (virtual)
+ * @irq_base: Interrupt base nr for this chip
+ * @irq_cnt: Number of interrupts handled by this chip
+ * @mask_cache: Cached mask register
+ * @type_cache: Cached type register
+ * @polarity_cache: Cached polarity register
+ * @wake_enabled: Interrupt can wakeup from suspend
+ * @wake_active: Interrupt is marked as an wakeup from suspend source
+ * @num_ct: Number of available irq_chip_type instances (usually 1)
+ * @private: Private data for non generic chip callbacks
+ * @list: List head for keeping track of instances
+ * @chip_types: Array of interrupt irq_chip_types
+ *
+ * Note, that irq_chip_generic can have multiple irq_chip_type
+ * implementations which can be associated to a particular irq line of
+ * an irq_chip_generic instance. That allows to share and protect
+ * state in an irq_chip_generic instance when we need to implement
+ * different flow mechanisms (level/edge) for it.
+ */
+struct irq_chip_generic {
+ raw_spinlock_t lock;
+ void __iomem *reg_base;
+ unsigned int irq_base;
+ unsigned int irq_cnt;
+ u32 mask_cache;
+ u32 type_cache;
+ u32 polarity_cache;
+ u32 wake_enabled;
+ u32 wake_active;
+ unsigned int num_ct;
+ void *private;
+ struct list_head list;
+ struct irq_chip_type chip_types[0];
+};
+
+/**
+ * enum irq_gc_flags - Initialization flags for generic irq chips
+ * @IRQ_GC_INIT_MASK_CACHE: Initialize the mask_cache by reading mask reg
+ * @IRQ_GC_INIT_NESTED_LOCK: Set the lock class of the irqs to nested for
+ * irq chips which need to call irq_set_wake() on
+ * the parent irq. Usually GPIO implementations
+ */
+enum irq_gc_flags {
+ IRQ_GC_INIT_MASK_CACHE = 1 << 0,
+ IRQ_GC_INIT_NESTED_LOCK = 1 << 1,
+};
+
+/* Generic chip callback functions */
+void irq_gc_noop(struct irq_data *d);
+void irq_gc_mask_disable_reg(struct irq_data *d);
+void irq_gc_mask_set_bit(struct irq_data *d);
+void irq_gc_mask_clr_bit(struct irq_data *d);
+void irq_gc_unmask_enable_reg(struct irq_data *d);
+void irq_gc_ack(struct irq_data *d);
+void irq_gc_mask_disable_reg_and_ack(struct irq_data *d);
+void irq_gc_eoi(struct irq_data *d);
+int irq_gc_set_wake(struct irq_data *d, unsigned int on);
+
+/* Setup functions for irq_chip_generic */
+struct irq_chip_generic *
+irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base,
+ void __iomem *reg_base, irq_flow_handler_t handler);
+void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
+ enum irq_gc_flags flags, unsigned int clr,
+ unsigned int set);
+int irq_setup_alt_chip(struct irq_data *d, unsigned int type);
+void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
+ unsigned int clr, unsigned int set);
+
+static inline struct irq_chip_type *irq_data_get_chip_type(struct irq_data *d)
+{
+ return container_of(d->chip, struct irq_chip_type, chip);
+}
+
+#define IRQ_MSK(n) (u32)((n) < 32 ? ((1 << (n)) - 1) : UINT_MAX)
+
+#ifdef CONFIG_SMP
+static inline void irq_gc_lock(struct irq_chip_generic *gc)
+{
+ raw_spin_lock(&gc->lock);
+}
+
+static inline void irq_gc_unlock(struct irq_chip_generic *gc)
+{
+ raw_spin_unlock(&gc->lock);
+}
+#else
+static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
+static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
+#endif
+
#endif /* CONFIG_GENERIC_HARDIRQS */
#endif /* !CONFIG_S390 */
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index a082905..2d921b3 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -16,16 +16,18 @@
* @irq_data: per irq and chip data passed down to chip functions
* @timer_rand_state: pointer to timer rand state struct
* @kstat_irqs: irq stats per cpu
- * @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
+ * @handle_irq: highlevel irq-events handler
+ * @preflow_handler: handler called before the flow handler (currently used by sparc)
* @action: the irq action chain
* @status: status information
* @core_internal_state__do_not_mess_with_it: core internal status information
* @depth: disable-depth, for nested irq_disable() calls
- * @wake_depth: enable depth, for multiple set_irq_wake() callers
+ * @wake_depth: enable depth, for multiple irq_set_irq_wake() callers
* @irq_count: stats field to detect stalled irqs
* @last_unhandled: aging timer for unhandled count
* @irqs_unhandled: stats field for spurious unhandled interrupts
* @lock: locking for SMP
+ * @affinity_hint: hint to user space for preferred irq affinity
* @affinity_notify: context for notification of affinity changes
* @pending_mask: pending rebalanced interrupts
* @threads_oneshot: bitfield to handle shared oneshot threads
@@ -109,10 +111,7 @@
desc->handle_irq(irq, desc);
}
-static inline void generic_handle_irq(unsigned int irq)
-{
- generic_handle_irq_desc(irq, irq_to_desc(irq));
-}
+int generic_handle_irq(unsigned int irq);
/* Test to see if a driver has successfully requested an irq */
static inline int irq_has_action(unsigned int irq)
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index 7880f18..83e745f 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -1,20 +1,43 @@
#ifndef _LINUX_JUMP_LABEL_H
#define _LINUX_JUMP_LABEL_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
+
+struct jump_label_key {
+ atomic_t enabled;
+ struct jump_entry *entries;
+#ifdef CONFIG_MODULES
+ struct jump_label_mod *next;
+#endif
+};
+
# include <asm/jump_label.h>
# define HAVE_JUMP_LABEL
#endif
enum jump_label_type {
+ JUMP_LABEL_DISABLE = 0,
JUMP_LABEL_ENABLE,
- JUMP_LABEL_DISABLE
};
struct module;
#ifdef HAVE_JUMP_LABEL
+#ifdef CONFIG_MODULES
+#define JUMP_LABEL_INIT {{ 0 }, NULL, NULL}
+#else
+#define JUMP_LABEL_INIT {{ 0 }, NULL}
+#endif
+
+static __always_inline bool static_branch(struct jump_label_key *key)
+{
+ return arch_static_branch(key);
+}
+
extern struct jump_entry __start___jump_table[];
extern struct jump_entry __stop___jump_table[];
@@ -23,37 +46,37 @@
extern void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type);
extern void arch_jump_label_text_poke_early(jump_label_t addr);
-extern void jump_label_update(unsigned long key, enum jump_label_type type);
-extern void jump_label_apply_nops(struct module *mod);
extern int jump_label_text_reserved(void *start, void *end);
-
-#define jump_label_enable(key) \
- jump_label_update((unsigned long)key, JUMP_LABEL_ENABLE);
-
-#define jump_label_disable(key) \
- jump_label_update((unsigned long)key, JUMP_LABEL_DISABLE);
+extern void jump_label_inc(struct jump_label_key *key);
+extern void jump_label_dec(struct jump_label_key *key);
+extern bool jump_label_enabled(struct jump_label_key *key);
+extern void jump_label_apply_nops(struct module *mod);
#else
-#define JUMP_LABEL(key, label) \
-do { \
- if (unlikely(*key)) \
- goto label; \
-} while (0)
+#include <asm/atomic.h>
-#define jump_label_enable(cond_var) \
-do { \
- *(cond_var) = 1; \
-} while (0)
+#define JUMP_LABEL_INIT {ATOMIC_INIT(0)}
-#define jump_label_disable(cond_var) \
-do { \
- *(cond_var) = 0; \
-} while (0)
+struct jump_label_key {
+ atomic_t enabled;
+};
-static inline int jump_label_apply_nops(struct module *mod)
+static __always_inline bool static_branch(struct jump_label_key *key)
{
- return 0;
+ if (unlikely(atomic_read(&key->enabled)))
+ return true;
+ return false;
+}
+
+static inline void jump_label_inc(struct jump_label_key *key)
+{
+ atomic_inc(&key->enabled);
+}
+
+static inline void jump_label_dec(struct jump_label_key *key)
+{
+ atomic_dec(&key->enabled);
}
static inline int jump_label_text_reserved(void *start, void *end)
@@ -64,16 +87,16 @@
static inline void jump_label_lock(void) {}
static inline void jump_label_unlock(void) {}
-#endif
+static inline bool jump_label_enabled(struct jump_label_key *key)
+{
+ return !!atomic_read(&key->enabled);
+}
-#define COND_STMT(key, stmt) \
-do { \
- __label__ jl_enabled; \
- JUMP_LABEL(key, jl_enabled); \
- if (0) { \
-jl_enabled: \
- stmt; \
- } \
-} while (0)
+static inline int jump_label_apply_nops(struct module *mod)
+{
+ return 0;
+}
+
+#endif
#endif
diff --git a/include/linux/jump_label_ref.h b/include/linux/jump_label_ref.h
deleted file mode 100644
index e5d012a..0000000
--- a/include/linux/jump_label_ref.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_JUMP_LABEL_REF_H
-#define _LINUX_JUMP_LABEL_REF_H
-
-#include <linux/jump_label.h>
-#include <asm/atomic.h>
-
-#ifdef HAVE_JUMP_LABEL
-
-static inline void jump_label_inc(atomic_t *key)
-{
- if (atomic_add_return(1, key) == 1)
- jump_label_enable(key);
-}
-
-static inline void jump_label_dec(atomic_t *key)
-{
- if (atomic_dec_and_test(key))
- jump_label_disable(key);
-}
-
-#else /* !HAVE_JUMP_LABEL */
-
-static inline void jump_label_inc(atomic_t *key)
-{
- atomic_inc(key);
-}
-
-static inline void jump_label_dec(atomic_t *key)
-{
- atomic_dec(key);
-}
-
-#undef JUMP_LABEL
-#define JUMP_LABEL(key, label) \
-do { \
- if (unlikely(__builtin_choose_expr( \
- __builtin_types_compatible_p(typeof(key), atomic_t *), \
- atomic_read((atomic_t *)(key)), *(key)))) \
- goto label; \
-} while (0)
-
-#endif /* HAVE_JUMP_LABEL */
-
-#endif /* _LINUX_JUMP_LABEL_REF_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 00cec4d..f37ba71 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -283,6 +283,7 @@
extern unsigned long long memparse(const char *ptr, char **retptr);
extern int core_kernel_text(unsigned long addr);
+extern int core_kernel_data(unsigned long addr);
extern int __kernel_text_address(unsigned long addr);
extern int kernel_text_address(unsigned long addr);
extern int func_ptr_is_kernel_text(void *ptr);
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 6efd7a7..3102318 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -113,5 +113,6 @@
extern int usermodehelper_disable(void);
extern void usermodehelper_enable(void);
+extern bool usermodehelper_is_disabled(void);
#endif /* __LINUX_KMOD_H__ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 04f32a3..5a9926b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1151,6 +1151,7 @@
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset);
extern void ata_std_error_handler(struct ata_port *ap);
+extern int ata_link_nr_enabled(struct ata_link *link);
/*
* Base operations to inherit from and initializers for sht
diff --git a/include/linux/list.h b/include/linux/list.h
index 3a54266..cc6d2aa 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -4,7 +4,7 @@
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/poison.h>
-#include <linux/prefetch.h>
+#include <linux/const.h>
/*
* Simple doubly linked list implementation.
@@ -367,18 +367,15 @@
* @head: the head for your list.
*/
#define list_for_each(pos, head) \
- for (pos = (head)->next; prefetch(pos->next), pos != (head); \
- pos = pos->next)
+ for (pos = (head)->next; pos != (head); pos = pos->next)
/**
* __list_for_each - iterate over a list
* @pos: the &struct list_head to use as a loop cursor.
* @head: the head for your list.
*
- * This variant differs from list_for_each() in that it's the
- * simplest possible list iteration code, no prefetching is done.
- * Use this for code that knows the list to be very short (empty
- * or 1 entry) most of the time.
+ * This variant doesn't differ from list_for_each() any more.
+ * We don't do prefetching in either case.
*/
#define __list_for_each(pos, head) \
for (pos = (head)->next; pos != (head); pos = pos->next)
@@ -389,8 +386,7 @@
* @head: the head for your list.
*/
#define list_for_each_prev(pos, head) \
- for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \
- pos = pos->prev)
+ for (pos = (head)->prev; pos != (head); pos = pos->prev)
/**
* list_for_each_safe - iterate over a list safe against removal of list entry
@@ -410,7 +406,7 @@
*/
#define list_for_each_prev_safe(pos, n, head) \
for (pos = (head)->prev, n = pos->prev; \
- prefetch(pos->prev), pos != (head); \
+ pos != (head); \
pos = n, n = pos->prev)
/**
@@ -421,7 +417,7 @@
*/
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member); \
- prefetch(pos->member.next), &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member))
/**
@@ -432,7 +428,7 @@
*/
#define list_for_each_entry_reverse(pos, head, member) \
for (pos = list_entry((head)->prev, typeof(*pos), member); \
- prefetch(pos->member.prev), &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry(pos->member.prev, typeof(*pos), member))
/**
@@ -457,7 +453,7 @@
*/
#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member); \
- prefetch(pos->member.next), &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member))
/**
@@ -471,7 +467,7 @@
*/
#define list_for_each_entry_continue_reverse(pos, head, member) \
for (pos = list_entry(pos->member.prev, typeof(*pos), member); \
- prefetch(pos->member.prev), &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry(pos->member.prev, typeof(*pos), member))
/**
@@ -483,7 +479,7 @@
* Iterate over list of given type, continuing from current position.
*/
#define list_for_each_entry_from(pos, head, member) \
- for (; prefetch(pos->member.next), &pos->member != (head); \
+ for (; &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member))
/**
@@ -664,8 +660,7 @@
#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
#define hlist_for_each(pos, head) \
- for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \
- pos = pos->next)
+ for (pos = (head)->first; pos ; pos = pos->next)
#define hlist_for_each_safe(pos, n, head) \
for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
@@ -680,7 +675,7 @@
*/
#define hlist_for_each_entry(tpos, pos, head, member) \
for (pos = (head)->first; \
- pos && ({ prefetch(pos->next); 1;}) && \
+ pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
pos = pos->next)
@@ -692,7 +687,7 @@
*/
#define hlist_for_each_entry_continue(tpos, pos, member) \
for (pos = (pos)->next; \
- pos && ({ prefetch(pos->next); 1;}) && \
+ pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
pos = pos->next)
@@ -703,7 +698,7 @@
* @member: the name of the hlist_node within the struct.
*/
#define hlist_for_each_entry_from(tpos, pos, member) \
- for (; pos && ({ prefetch(pos->next); 1;}) && \
+ for (; pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
pos = pos->next)
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index afe4db4..632d156 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -81,7 +81,9 @@
int rpu; /** Pen down sensitivity resistor divider */
int pressure; /** Report pressure (boolean) */
unsigned int data_irq; /** Touch data ready IRQ */
+ int data_irqf; /** IRQ flags for data ready IRQ */
unsigned int pd_irq; /** Touch pendown detect IRQ */
+ int pd_irqf; /** IRQ flags for pen down IRQ */
};
enum wm831x_watchdog_action {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2348db2..6507dde 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1011,11 +1011,33 @@
int clear_page_dirty_for_io(struct page *page);
/* Is the vma a continuation of the stack vma above it? */
-static inline int vma_stack_continue(struct vm_area_struct *vma, unsigned long addr)
+static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr)
{
return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN);
}
+static inline int stack_guard_page_start(struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ return (vma->vm_flags & VM_GROWSDOWN) &&
+ (vma->vm_start == addr) &&
+ !vma_growsdown(vma->vm_prev, addr);
+}
+
+/* Is the vma a continuation of the stack vma below it? */
+static inline int vma_growsup(struct vm_area_struct *vma, unsigned long addr)
+{
+ return vma && (vma->vm_start == addr) && (vma->vm_flags & VM_GROWSUP);
+}
+
+static inline int stack_guard_page_end(struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ return (vma->vm_flags & VM_GROWSUP) &&
+ (vma->vm_end == addr) &&
+ !vma_growsup(vma->vm_next, addr);
+}
+
extern unsigned long move_page_tables(struct vm_area_struct *vma,
unsigned long old_addr, struct vm_area_struct *new_vma,
unsigned long new_addr, unsigned long len);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48c007d..ae28e93 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -382,6 +382,23 @@
#define SSB_ANY_ID 0xFFFF
#define SSB_ANY_REV 0xFF
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+ __u16 manuf;
+ __u16 id;
+ __u8 rev;
+ __u8 class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class) \
+ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END \
+ { 0, },
+
+#define BCMA_ANY_MANUF 0xFFFF
+#define BCMA_ANY_ID 0xFFFF
+#define BCMA_ANY_REV 0xFF
+#define BCMA_ANY_CLASS 0xFF
+
struct virtio_device_id {
__u32 device;
__u32 vendor;
diff --git a/include/linux/module.h b/include/linux/module.h
index 5de4204..d9ca2d5 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -64,6 +64,9 @@
const char *version;
} __attribute__ ((__aligned__(sizeof(void *))));
+extern ssize_t __modver_version_show(struct module_attribute *,
+ struct module *, char *);
+
struct module_kobject
{
struct kobject kobj;
@@ -172,12 +175,7 @@
#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
#else
#define MODULE_VERSION(_version) \
- extern ssize_t __modver_version_show(struct module_attribute *, \
- struct module *, char *); \
- static struct module_version_attribute __modver_version_attr \
- __used \
- __attribute__ ((__section__ ("__modver"),aligned(sizeof(void *)))) \
- = { \
+ static struct module_version_attribute ___modver_attr = { \
.mattr = { \
.attr = { \
.name = "version", \
@@ -187,7 +185,10 @@
}, \
.module_name = KBUILD_MODNAME, \
.version = _version, \
- }
+ }; \
+ static const struct module_version_attribute \
+ __used __attribute__ ((__section__ ("__modver"))) \
+ * __moduleparam_const __modver_attr = &___modver_attr
#endif
/* Optional firmware file (or files) needed by the module
@@ -223,7 +224,7 @@
extern void *__crc_##sym __attribute__((weak)); \
static const unsigned long __kcrctab_##sym \
__used \
- __attribute__((section("__kcrctab" sec), unused)) \
+ __attribute__((section("___kcrctab" sec "+" #sym), unused)) \
= (unsigned long) &__crc_##sym;
#else
#define __CRC_SYMBOL(sym, sec)
@@ -238,7 +239,7 @@
= MODULE_SYMBOL_PREFIX #sym; \
static const struct kernel_symbol __ksymtab_##sym \
__used \
- __attribute__((section("__ksymtab" sec), unused)) \
+ __attribute__((section("___ksymtab" sec "+" #sym), unused)) \
= { (unsigned long)&sym, __kstrtab_##sym }
#define EXPORT_SYMBOL(sym) \
@@ -367,34 +368,35 @@
struct module_notes_attrs *notes_attrs;
#endif
+ /* The command line arguments (may be mangled). People like
+ keeping pointers to this stuff */
+ char *args;
+
#ifdef CONFIG_SMP
/* Per-cpu data. */
void __percpu *percpu;
unsigned int percpu_size;
#endif
- /* The command line arguments (may be mangled). People like
- keeping pointers to this stuff */
- char *args;
#ifdef CONFIG_TRACEPOINTS
- struct tracepoint * const *tracepoints_ptrs;
unsigned int num_tracepoints;
+ struct tracepoint * const *tracepoints_ptrs;
#endif
#ifdef HAVE_JUMP_LABEL
struct jump_entry *jump_entries;
unsigned int num_jump_entries;
#endif
#ifdef CONFIG_TRACING
- const char **trace_bprintk_fmt_start;
unsigned int num_trace_bprintk_fmt;
+ const char **trace_bprintk_fmt_start;
#endif
#ifdef CONFIG_EVENT_TRACING
struct ftrace_event_call **trace_events;
unsigned int num_trace_events;
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
- unsigned long *ftrace_callsites;
unsigned int num_ftrace_callsites;
+ unsigned long *ftrace_callsites;
#endif
#ifdef CONFIG_MODULE_UNLOAD
@@ -475,8 +477,9 @@
bool warn);
/* Walk the exported symbol table */
-bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner,
- unsigned int symnum, void *data), void *data);
+bool each_symbol_section(bool (*fn)(const struct symsearch *arr,
+ struct module *owner,
+ void *data), void *data);
/* Returns 0 and fills in value, defined and namebuf, or -ERANGE if
symnum out of range. */
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 07b4195..ddaae98 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -67,9 +67,9 @@
struct kparam_array
{
unsigned int max;
+ unsigned int elemsize;
unsigned int *num;
const struct kernel_param_ops *ops;
- unsigned int elemsize;
void *elem;
};
@@ -371,8 +371,9 @@
*/
#define module_param_array_named(name, array, type, nump, perm) \
static const struct kparam_array __param_arr_##name \
- = { ARRAY_SIZE(array), nump, ¶m_ops_##type, \
- sizeof(array[0]), array }; \
+ = { .max = ARRAY_SIZE(array), .num = nump, \
+ .ops = ¶m_ops_##type, \
+ .elemsize = sizeof(array[0]), .elem = array }; \
__module_param_call(MODULE_PARAM_PREFIX, name, \
¶m_array_ops, \
.arr = &__param_arr_##name, \
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index b21d567..46caaf4 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -244,6 +244,7 @@
#ifdef __KERNEL__
struct rtmsg;
extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
+ __be32 saddr, __be32 daddr,
struct rtmsg *rtm, int nowait);
#endif
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index bcfd9f7..49b9590 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -22,7 +22,9 @@
struct physmap_flash_data {
unsigned int width;
- void (*set_vpp)(struct map_info *, int);
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
+ void (*set_vpp)(struct platform_device *, int);
unsigned int nr_parts;
unsigned int pfow_base;
char *probe_type;
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 94b48bd..c75471db 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -51,7 +51,7 @@
spinlock_t wait_lock;
struct list_head wait_list;
#if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP)
- struct thread_info *owner;
+ struct task_struct *owner;
#endif
#ifdef CONFIG_DEBUG_MUTEXES
const char *name;
diff --git a/include/linux/net.h b/include/linux/net.h
index 94de83c..1da55e9 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -42,6 +42,7 @@
#define SYS_RECVMSG 17 /* sys_recvmsg(2) */
#define SYS_ACCEPT4 18 /* sys_accept4(2) */
#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */
+#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */
typedef enum {
SS_FREE = 0, /* not allocated */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 0249fe7..ca333e7 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1020,9 +1020,6 @@
* part of the usual set specified in Space.c.
*/
- unsigned char if_port; /* Selectable AUI, TP,..*/
- unsigned char dma; /* DMA channel */
-
unsigned long state;
struct list_head dev_list;
@@ -1035,7 +1032,7 @@
u32 hw_features;
/* user-requested features */
u32 wanted_features;
- /* VLAN feature mask */
+ /* mask of features inheritable by VLAN devices */
u32 vlan_features;
/* Net device feature bits; if you change something,
@@ -1066,6 +1063,8 @@
#define NETIF_F_NTUPLE (1 << 27) /* N-tuple filters supported */
#define NETIF_F_RXHASH (1 << 28) /* Receive hashing offload */
#define NETIF_F_RXCSUM (1 << 29) /* Receive checksumming offload */
+#define NETIF_F_NOCACHE_COPY (1 << 30) /* Use no-cache copyfromuser */
+#define NETIF_F_LOOPBACK (1 << 31) /* Enable loopback */
/* Segmentation offload features */
#define NETIF_F_GSO_SHIFT 16
@@ -1079,9 +1078,9 @@
/* Features valid for ethtool to change */
/* = all defined minus driver/device-class-related */
-#define NETIF_F_NEVER_CHANGE (NETIF_F_HIGHDMA | NETIF_F_VLAN_CHALLENGED | \
+#define NETIF_F_NEVER_CHANGE (NETIF_F_VLAN_CHALLENGED | \
NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
-#define NETIF_F_ETHTOOL_BITS (0x3f3fffff & ~NETIF_F_NEVER_CHANGE)
+#define NETIF_F_ETHTOOL_BITS (0xff3fffff & ~NETIF_F_NEVER_CHANGE)
/* List of features with software fallbacks. */
#define NETIF_F_GSO_SOFTWARE (NETIF_F_TSO | NETIF_F_TSO_ECN | \
@@ -1095,9 +1094,14 @@
#define NETIF_F_ALL_TSO (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
+#define NETIF_F_ALL_FCOE (NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \
+ NETIF_F_FSO)
+
#define NETIF_F_ALL_TX_OFFLOADS (NETIF_F_ALL_CSUM | NETIF_F_SG | \
NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
- NETIF_F_SCTP_CSUM | NETIF_F_FCOE_CRC)
+ NETIF_F_HIGHDMA | \
+ NETIF_F_SCTP_CSUM | \
+ NETIF_F_ALL_FCOE)
/*
* If one device supports one of these features, then enable them
@@ -1105,7 +1109,12 @@
*/
#define NETIF_F_ONE_FOR_ALL (NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
NETIF_F_SG | NETIF_F_HIGHDMA | \
- NETIF_F_FRAGLIST)
+ NETIF_F_FRAGLIST | NETIF_F_VLAN_CHALLENGED)
+ /*
+ * If one device doesn't support one of these features, then disable it
+ * for all in netdev_increment_features.
+ */
+#define NETIF_F_ALL_FOR_ALL (NETIF_F_NOCACHE_COPY | NETIF_F_FSO)
/* changeable features with no special hardware requirements */
#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO)
@@ -1134,13 +1143,16 @@
const struct header_ops *header_ops;
unsigned int flags; /* interface flags (a la BSD) */
+ unsigned int priv_flags; /* Like 'flags' but invisible to userspace. */
unsigned short gflags;
- unsigned int priv_flags; /* Like 'flags' but invisible to userspace. */
unsigned short padded; /* How much padding added by alloc_netdev() */
unsigned char operstate; /* RFC2863 operstate */
unsigned char link_mode; /* mapping policy to operstate */
+ unsigned char if_port; /* Selectable AUI, TP,..*/
+ unsigned char dma; /* DMA channel */
+
unsigned int mtu; /* interface MTU value */
unsigned short type; /* interface hardware type */
unsigned short hard_header_len; /* hardware hdr length */
@@ -1281,7 +1293,9 @@
NETREG_UNREGISTERED, /* completed unregister todo */
NETREG_RELEASED, /* called free_netdev */
NETREG_DUMMY, /* dummy device for NAPI poll */
- } reg_state:16;
+ } reg_state:8;
+
+ bool dismantle; /* device is going do be freed */
enum {
RTNL_LINK_INITIALIZED,
@@ -2513,6 +2527,7 @@
extern int netdev_max_backlog;
extern int netdev_tstamp_prequeue;
extern int weight_p;
+extern int bpf_jit_enable;
extern int netdev_set_master(struct net_device *dev, struct net_device *master);
extern int netdev_set_bond_master(struct net_device *dev,
struct net_device *master);
@@ -2550,7 +2565,9 @@
}
u32 netdev_increment_features(u32 all, u32 one, u32 mask);
u32 netdev_fix_features(struct net_device *dev, u32 features);
+int __netdev_update_features(struct net_device *dev);
void netdev_update_features(struct net_device *dev);
+void netdev_change_features(struct net_device *dev);
void netif_stacked_transfer_operstate(const struct net_device *rootdev,
struct net_device *dev);
@@ -2588,13 +2605,8 @@
extern struct pernet_operations __net_initdata loopback_net_ops;
-static inline int dev_ethtool_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
- return -EOPNOTSUPP;
- return dev->ethtool_ops->get_settings(dev, cmd);
-}
+int dev_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd);
static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
{
diff --git a/include/linux/netfilter/ipset/ip_set_getport.h b/include/linux/netfilter/ipset/ip_set_getport.h
index 5aebd17..90d0930 100644
--- a/include/linux/netfilter/ipset/ip_set_getport.h
+++ b/include/linux/netfilter/ipset/ip_set_getport.h
@@ -22,7 +22,9 @@
{
switch (proto) {
case IPPROTO_TCP:
+ case IPPROTO_SCTP:
case IPPROTO_UDP:
+ case IPPROTO_UDPLITE:
return true;
}
return false;
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 3721952..32cddf7 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -456,72 +456,60 @@
extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
extern void xt_free_table_info(struct xt_table_info *info);
-/*
- * Per-CPU spinlock associated with per-cpu table entries, and
- * with a counter for the "reading" side that allows a recursive
- * reader to avoid taking the lock and deadlocking.
- *
- * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu.
- * It needs to ensure that the rules are not being changed while the packet
- * is being processed. In some cases, the read lock will be acquired
- * twice on the same CPU; this is okay because of the count.
- *
- * "writing" is used when reading counters.
- * During replace any readers that are using the old tables have to complete
- * before freeing the old table. This is handled by the write locking
- * necessary for reading the counters.
+/**
+ * xt_recseq - recursive seqcount for netfilter use
+ *
+ * Packet processing changes the seqcount only if no recursion happened
+ * get_counters() can use read_seqcount_begin()/read_seqcount_retry(),
+ * because we use the normal seqcount convention :
+ * Low order bit set to 1 if a writer is active.
*/
-struct xt_info_lock {
- seqlock_t lock;
- unsigned char readers;
-};
-DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
+DECLARE_PER_CPU(seqcount_t, xt_recseq);
-/*
- * Note: we need to ensure that preemption is disabled before acquiring
- * the per-cpu-variable, so we do it as a two step process rather than
- * using "spin_lock_bh()".
+/**
+ * xt_write_recseq_begin - start of a write section
*
- * We _also_ need to disable bottom half processing before updating our
- * nesting count, to make sure that the only kind of re-entrancy is this
- * code being called by itself: since the count+lock is not an atomic
- * operation, we can allow no races.
- *
- * _Only_ that special combination of being per-cpu and never getting
- * re-entered asynchronously means that the count is safe.
+ * Begin packet processing : all readers must wait the end
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add())
+ * Returns :
+ * 1 if no recursion on this cpu
+ * 0 if recursion detected
*/
-static inline void xt_info_rdlock_bh(void)
+static inline unsigned int xt_write_recseq_begin(void)
{
- struct xt_info_lock *lock;
+ unsigned int addend;
- local_bh_disable();
- lock = &__get_cpu_var(xt_info_locks);
- if (likely(!lock->readers++))
- write_seqlock(&lock->lock);
+ /*
+ * Low order bit of sequence is set if we already
+ * called xt_write_recseq_begin().
+ */
+ addend = (__this_cpu_read(xt_recseq.sequence) + 1) & 1;
+
+ /*
+ * This is kind of a write_seqcount_begin(), but addend is 0 or 1
+ * We dont check addend value to avoid a test and conditional jump,
+ * since addend is most likely 1
+ */
+ __this_cpu_add(xt_recseq.sequence, addend);
+ smp_wmb();
+
+ return addend;
}
-static inline void xt_info_rdunlock_bh(void)
-{
- struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
-
- if (likely(!--lock->readers))
- write_sequnlock(&lock->lock);
- local_bh_enable();
-}
-
-/*
- * The "writer" side needs to get exclusive access to the lock,
- * regardless of readers. This must be called with bottom half
- * processing (and thus also preemption) disabled.
+/**
+ * xt_write_recseq_end - end of a write section
+ * @addend: return value from previous xt_write_recseq_begin()
+ *
+ * End packet processing : all readers can proceed
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add())
*/
-static inline void xt_info_wrlock(unsigned int cpu)
+static inline void xt_write_recseq_end(unsigned int addend)
{
- write_seqlock(&per_cpu(xt_info_locks, cpu).lock);
-}
-
-static inline void xt_info_wrunlock(unsigned int cpu)
-{
- write_sequnlock(&per_cpu(xt_info_locks, cpu).lock);
+ /* this is kind of a write_seqcount_end(), but addend is 0 or 1 */
+ smp_wmb();
+ __this_cpu_add(xt_recseq.sequence, addend);
}
/*
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 890dce2..7e371f7 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -233,6 +233,7 @@
struct nfs4_layoutget_args args;
struct nfs4_layoutget_res res;
struct pnfs_layout_segment **lsegpp;
+ gfp_t gfp_flags;
};
struct nfs4_getdeviceinfo_args {
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index bbfa109..c7ccaae 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -77,6 +77,39 @@
*/
/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -203,6 +236,28 @@
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
* partial scan results may be available
*
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ * are passed, they are used in the probe requests. For
+ * broadcast, a broadcast SSID must be passed (ie. an empty
+ * string). If no SSID is passed, no probe requests are sent and
+ * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
+ * if passed, define which channels should be scanned; if not
+ * passed, all channels allowed for the current regulatory domain
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ * results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ * stopped. The driver may issue this event at any time during a
+ * scheduled scan. One reason for stopping the scan is if the hardware
+ * does not support starting an association or a normal scan while running
+ * a scheduled scan. This event is also sent when the
+ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ * is brought down while a scheduled scan was running.
+ *
* @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
* or noise level
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
@@ -410,6 +465,24 @@
* notification. This event is used to indicate that an unprotected
* disassociation frame was dropped when MFP is in use.
*
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ * beacon or probe response from a compatible mesh peer. This is only
+ * sent while no station information (sta_info) exists for the new peer
+ * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
+ * reception of this notification, userspace may decide to create a new
+ * station (@NL80211_CMD_NEW_STATION). To stop this notification from
+ * reoccurring, the userspace authentication daemon may want to create the
+ * new station with the AUTHENTICATED flag unset and maybe change it later
+ * depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ * Since wireless is more complex than wired ethernet, it supports
+ * various triggers. These triggers can be configured through this
+ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ * more background information, see
+ * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -522,6 +595,16 @@
NL80211_CMD_UNPROT_DEAUTHENTICATE,
NL80211_CMD_UNPROT_DISASSOCIATE,
+ NL80211_CMD_NEW_PEER_CANDIDATE,
+
+ NL80211_CMD_GET_WOWLAN,
+ NL80211_CMD_SET_WOWLAN,
+
+ NL80211_CMD_START_SCHED_SCAN,
+ NL80211_CMD_STOP_SCHED_SCAN,
+ NL80211_CMD_SCHED_SCAN_RESULTS,
+ NL80211_CMD_SCHED_SCAN_STOPPED,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -545,6 +628,7 @@
/* source-level API compatibility */
#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
/**
* enum nl80211_attrs - nl80211 netlink attributes
@@ -886,6 +970,31 @@
* changed once the mesh is active.
* @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
* containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ * allows auth frames in a mesh to be passed to userspace for processing via
+ * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ * defined in &enum nl80211_plink_state. Used when userspace is
+ * driving the peer link management state machine.
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
+ * the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ * indicate which WoW triggers should be enabled. This is also
+ * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ * triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ * cycles, in msecs.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ * interface combinations. In each nested item, it contains attributes
+ * defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ * are managed in software: interfaces of these types aren't subject to
+ * any restrictions in their number or combinations.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1074,6 +1183,17 @@
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+ NL80211_ATTR_SUPPORT_MESH_AUTH,
+ NL80211_ATTR_STA_PLINK_STATE,
+
+ NL80211_ATTR_WOWLAN_TRIGGERS,
+ NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+ NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+ NL80211_ATTR_INTERFACE_COMBINATIONS,
+ NL80211_ATTR_SOFTWARE_IFTYPES,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1126,7 +1246,9 @@
* @NL80211_IFTYPE_ADHOC: independent BSS member
* @NL80211_IFTYPE_STATION: managed BSS member
* @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ * are a bit special in that they must always be tied to a pre-existing
+ * AP type interface.
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
@@ -1168,6 +1290,7 @@
* with short barker preamble
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -1177,6 +1300,7 @@
NL80211_STA_FLAG_SHORT_PREAMBLE,
NL80211_STA_FLAG_WME,
NL80211_STA_FLAG_MFP,
+ NL80211_STA_FLAG_AUTHENTICATED,
/* keep last */
__NL80211_STA_FLAG_AFTER_LAST,
@@ -1222,6 +1346,36 @@
};
/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
+ * (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
+ * (flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+ __NL80211_STA_BSS_PARAM_INVALID,
+ NL80211_STA_BSS_PARAM_CTS_PROT,
+ NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+ NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+ NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+ NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+ /* keep last */
+ __NL80211_STA_BSS_PARAM_AFTER_LAST,
+ NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_sta_info - station information
*
* These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -1233,7 +1387,7 @@
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_sta_info_txrate.
+ * containing info as possible, see &enum nl80211_rate_info
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
* station)
@@ -1243,8 +1397,12 @@
* @NL80211_STA_INFO_LLID: the station's mesh LLID
* @NL80211_STA_INFO_PLID: the station's mesh PLID
* @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * (see %enum nl80211_plink_state)
* @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
* attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ * containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -1264,6 +1422,8 @@
NL80211_STA_INFO_TX_FAILED,
NL80211_STA_INFO_SIGNAL_AVG,
NL80211_STA_INFO_RX_BITRATE,
+ NL80211_STA_INFO_BSS_PARAM,
+ NL80211_STA_INFO_CONNECTED_TIME,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -1686,9 +1846,21 @@
* vendor specific path metric or disable it to use the default Airtime
* metric.
*
- * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information
- * element that vendors will use to identify the path selection methods and
- * metrics in use.
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames. AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon. When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management). When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
*
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -1697,7 +1869,9 @@
__NL80211_MESH_SETUP_INVALID,
NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
- NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE,
+ NL80211_MESH_SETUP_IE,
+ NL80211_MESH_SETUP_USERSPACE_AUTH,
+ NL80211_MESH_SETUP_USERSPACE_AMPE,
/* keep last */
__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -2002,4 +2176,189 @@
NL80211_TX_POWER_FIXED,
};
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ * a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ * a bit for each byte in the pattern. The lowest-order bit corresponds
+ * to the first byte of the pattern, but the bytes of the pattern are
+ * in a little-endian-like format, i.e. the 9th byte of the pattern
+ * corresponds to the lowest-order bit in the second byte of the mask.
+ * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ * xx indicates "don't care") would be represented by a pattern of
+ * twelve zero bytes, and a mask of "0xed,0x07".
+ * Note that the pattern matching is done as though frames were not
+ * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ * first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+ __NL80211_WOWLAN_PKTPAT_INVALID,
+ NL80211_WOWLAN_PKTPAT_MASK,
+ NL80211_WOWLAN_PKTPAT_PATTERN,
+
+ NUM_NL80211_WOWLAN_PKTPAT,
+ MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+ __u32 max_patterns;
+ __u32 min_pattern_len;
+ __u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ * the chip into a special state -- works best with chips that have
+ * support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ * is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ * by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ * which are passed in an array of nested attributes, each nested attribute
+ * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ * Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ * i.e. as though the packet was an 802.3 packet, so the pattern matching
+ * is done after the packet is converted to the MSDU.
+ *
+ * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ * carrying a &struct nl80211_wowlan_pattern_support.
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+ __NL80211_WOWLAN_TRIG_INVALID,
+ NL80211_WOWLAN_TRIG_ANY,
+ NL80211_WOWLAN_TRIG_DISCONNECT,
+ NL80211_WOWLAN_TRIG_MAGIC_PKT,
+ NL80211_WOWLAN_TRIG_PKT_PATTERN,
+
+ /* keep last */
+ NUM_NL80211_WOWLAN_TRIG,
+ MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ * can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ * flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+ NL80211_IFACE_LIMIT_UNSPEC,
+ NL80211_IFACE_LIMIT_MAX,
+ NL80211_IFACE_LIMIT_TYPES,
+
+ /* keep last */
+ NUM_NL80211_IFACE_LIMIT,
+ MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ * for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ * interfaces that can be created in this group. This number doesn't
+ * apply to interfaces purely managed in software, which are listed
+ * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ * beacon intervals within this group must be all the same even for
+ * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ * the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ * different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ * => allows an AP and a STA that must match BIs
+ *
+ * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ * => allows 8 of AP/GO
+ *
+ * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ * => allows two STAs on different channels
+ *
+ * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ * => allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+ NL80211_IFACE_COMB_UNSPEC,
+ NL80211_IFACE_COMB_LIMITS,
+ NL80211_IFACE_COMB_MAXNUM,
+ NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+ NL80211_IFACE_COMB_NUM_CHANNELS,
+
+ /* keep last */
+ NUM_NL80211_IFACE_COMB,
+ MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ * state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ * this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ * from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ * received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ * plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+ NL80211_PLINK_LISTEN,
+ NL80211_PLINK_OPN_SNT,
+ NL80211_PLINK_OPN_RCVD,
+ NL80211_PLINK_CNF_RCVD,
+ NL80211_PLINK_ESTAB,
+ NL80211_PLINK_HOLDING,
+ NL80211_PLINK_BLOCKED,
+
+ /* keep last */
+ NUM_NL80211_PLINK_STATES,
+ MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 8bfe6c1..ae56384 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -21,8 +21,7 @@
static inline int of_driver_match_device(struct device *dev,
const struct device_driver *drv)
{
- dev->of_match = of_match_device(drv->of_match_table, dev);
- return dev->of_match != NULL;
+ return of_match_device(drv->of_match_table, dev) != NULL;
}
extern struct platform_device *of_dev_get(struct platform_device *dev);
@@ -58,6 +57,11 @@
static inline void of_device_node_put(struct device *dev) { }
+static inline const struct of_device_id *of_match_device(
+ const struct of_device_id *matches, const struct device *dev)
+{
+ return NULL;
+}
#endif /* CONFIG_OF_DEVICE */
#endif /* _LINUX_OF_DEVICE_H */
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 109e013..e6955f5 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -68,6 +68,7 @@
extern int of_irq_count(struct device_node *dev);
extern int of_irq_to_resource_table(struct device_node *dev,
struct resource *res, int nr_irqs);
+extern struct device_node *of_irq_find_parent(struct device_node *child);
#endif /* CONFIG_OF_IRQ */
#endif /* CONFIG_OF */
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
new file mode 100644
index 0000000..655824f
--- /dev/null
+++ b/include/linux/pci-ats.h
@@ -0,0 +1,52 @@
+#ifndef LINUX_PCI_ATS_H
+#define LINUX_PCI_ATS_H
+
+/* Address Translation Service */
+struct pci_ats {
+ int pos; /* capability position */
+ int stu; /* Smallest Translation Unit */
+ int qdep; /* Invalidate Queue Depth */
+ int ref_cnt; /* Physical Function reference count */
+ unsigned int is_enabled:1; /* Enable bit is set */
+};
+
+#ifdef CONFIG_PCI_IOV
+
+extern int pci_enable_ats(struct pci_dev *dev, int ps);
+extern void pci_disable_ats(struct pci_dev *dev);
+extern int pci_ats_queue_depth(struct pci_dev *dev);
+/**
+ * pci_ats_enabled - query the ATS status
+ * @dev: the PCI device
+ *
+ * Returns 1 if ATS capability is enabled, or 0 if not.
+ */
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+ return dev->ats && dev->ats->is_enabled;
+}
+
+#else /* CONFIG_PCI_IOV */
+
+static inline int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+ return -ENODEV;
+}
+
+static inline void pci_disable_ats(struct pci_dev *dev)
+{
+}
+
+static inline int pci_ats_queue_depth(struct pci_dev *dev)
+{
+ return -ENODEV;
+}
+
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_PCI_IOV */
+
+#endif /* LINUX_PCI_ATS_H*/
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4e2c915..8652a4f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -608,6 +608,8 @@
#define PCI_DEVICE_ID_MATROX_G550 0x2527
#define PCI_DEVICE_ID_MATROX_VIA 0x4536
+#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2
+
#define PCI_VENDOR_ID_CT 0x102c
#define PCI_DEVICE_ID_CT_69000 0x00c0
#define PCI_DEVICE_ID_CT_65545 0x00d8
@@ -2477,15 +2479,12 @@
#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21
#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
#define PCI_DEVICE_ID_INTEL_IOAT 0x1a38
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
@@ -2696,7 +2695,6 @@
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0
#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 3a5c444..8b97308 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -948,7 +948,7 @@
irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
# endif
# define irqsafe_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) \
- __pcpu_double_call_return_int(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
+ __pcpu_double_call_return_bool(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
#endif
#endif /* __LINUX_PERCPU_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index ee9f1e7..3412684 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -2,8 +2,8 @@
* Performance events:
*
* Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra
+ * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
*
* Data type definitions, declarations, prototypes.
*
@@ -52,6 +52,8 @@
PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4,
PERF_COUNT_HW_BRANCH_MISSES = 5,
PERF_COUNT_HW_BUS_CYCLES = 6,
+ PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7,
+ PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8,
PERF_COUNT_HW_MAX, /* non-ABI */
};
@@ -468,9 +470,9 @@
PERF_CONTEXT_MAX = (__u64)-4095,
};
-#define PERF_FLAG_FD_NO_GROUP (1U << 0)
-#define PERF_FLAG_FD_OUTPUT (1U << 1)
-#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */
+#define PERF_FLAG_FD_NO_GROUP (1U << 0)
+#define PERF_FLAG_FD_OUTPUT (1U << 1)
+#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */
#ifdef __KERNEL__
/*
@@ -484,9 +486,9 @@
#endif
struct perf_guest_info_callbacks {
- int (*is_in_guest) (void);
- int (*is_user_mode) (void);
- unsigned long (*get_guest_ip) (void);
+ int (*is_in_guest)(void);
+ int (*is_user_mode)(void);
+ unsigned long (*get_guest_ip)(void);
};
#ifdef CONFIG_HAVE_HW_BREAKPOINT
@@ -505,7 +507,7 @@
#include <linux/ftrace.h>
#include <linux/cpu.h>
#include <linux/irq_work.h>
-#include <linux/jump_label_ref.h>
+#include <linux/jump_label.h>
#include <asm/atomic.h>
#include <asm/local.h>
@@ -652,19 +654,19 @@
* Start the transaction, after this ->add() doesn't need to
* do schedulability tests.
*/
- void (*start_txn) (struct pmu *pmu); /* optional */
+ void (*start_txn) (struct pmu *pmu); /* optional */
/*
* If ->start_txn() disabled the ->add() schedulability test
* then ->commit_txn() is required to perform one. On success
* the transaction is closed. On error the transaction is kept
* open until ->cancel_txn() is called.
*/
- int (*commit_txn) (struct pmu *pmu); /* optional */
+ int (*commit_txn) (struct pmu *pmu); /* optional */
/*
* Will cancel the transaction, assumes ->del() is called
* for each successful ->add() during the transaction.
*/
- void (*cancel_txn) (struct pmu *pmu); /* optional */
+ void (*cancel_txn) (struct pmu *pmu); /* optional */
};
/**
@@ -712,15 +714,15 @@
struct pt_regs *regs);
enum perf_group_flag {
- PERF_GROUP_SOFTWARE = 0x1,
+ PERF_GROUP_SOFTWARE = 0x1,
};
-#define SWEVENT_HLIST_BITS 8
-#define SWEVENT_HLIST_SIZE (1 << SWEVENT_HLIST_BITS)
+#define SWEVENT_HLIST_BITS 8
+#define SWEVENT_HLIST_SIZE (1 << SWEVENT_HLIST_BITS)
struct swevent_hlist {
- struct hlist_head heads[SWEVENT_HLIST_SIZE];
- struct rcu_head rcu_head;
+ struct hlist_head heads[SWEVENT_HLIST_SIZE];
+ struct rcu_head rcu_head;
};
#define PERF_ATTACH_CONTEXT 0x01
@@ -733,13 +735,13 @@
* This is a per-cpu dynamically allocated data structure.
*/
struct perf_cgroup_info {
- u64 time;
- u64 timestamp;
+ u64 time;
+ u64 timestamp;
};
struct perf_cgroup {
- struct cgroup_subsys_state css;
- struct perf_cgroup_info *info; /* timing info, one per cpu */
+ struct cgroup_subsys_state css;
+ struct perf_cgroup_info *info; /* timing info, one per cpu */
};
#endif
@@ -923,7 +925,7 @@
/*
* Number of contexts where an event can trigger:
- * task, softirq, hardirq, nmi.
+ * task, softirq, hardirq, nmi.
*/
#define PERF_NR_CONTEXTS 4
@@ -1001,8 +1003,7 @@
struct perf_raw_record *raw;
};
-static inline
-void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
+static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
{
data->addr = addr;
data->raw = NULL;
@@ -1034,13 +1035,12 @@
return event->pmu->task_ctx_nr == perf_sw_context;
}
-extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
+extern struct jump_label_key perf_swevent_enabled[PERF_COUNT_SW_MAX];
extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64);
#ifndef perf_arch_fetch_caller_regs
-static inline void
-perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
+static inline void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
#endif
/*
@@ -1063,26 +1063,24 @@
{
struct pt_regs hot_regs;
- JUMP_LABEL(&perf_swevent_enabled[event_id], have_event);
- return;
-
-have_event:
- if (!regs) {
- perf_fetch_caller_regs(&hot_regs);
- regs = &hot_regs;
+ if (static_branch(&perf_swevent_enabled[event_id])) {
+ if (!regs) {
+ perf_fetch_caller_regs(&hot_regs);
+ regs = &hot_regs;
+ }
+ __perf_sw_event(event_id, nr, nmi, regs, addr);
}
- __perf_sw_event(event_id, nr, nmi, regs, addr);
}
-extern atomic_t perf_sched_events;
+extern struct jump_label_key perf_sched_events;
static inline void perf_event_task_sched_in(struct task_struct *task)
{
- COND_STMT(&perf_sched_events, __perf_event_task_sched_in(task));
+ if (static_branch(&perf_sched_events))
+ __perf_event_task_sched_in(task);
}
-static inline
-void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+static inline void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
{
perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
@@ -1100,14 +1098,10 @@
/* Callchains */
DECLARE_PER_CPU(struct perf_callchain_entry, perf_callchain_entry);
-extern void perf_callchain_user(struct perf_callchain_entry *entry,
- struct pt_regs *regs);
-extern void perf_callchain_kernel(struct perf_callchain_entry *entry,
- struct pt_regs *regs);
+extern void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs);
+extern void perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs);
-
-static inline void
-perf_callchain_store(struct perf_callchain_entry *entry, u64 ip)
+static inline void perf_callchain_store(struct perf_callchain_entry *entry, u64 ip)
{
if (entry->nr < PERF_MAX_STACK_DEPTH)
entry->ip[entry->nr++] = ip;
@@ -1143,9 +1137,9 @@
extern void perf_bp_event(struct perf_event *event, void *data);
#ifndef perf_misc_flags
-#define perf_misc_flags(regs) (user_mode(regs) ? PERF_RECORD_MISC_USER : \
- PERF_RECORD_MISC_KERNEL)
-#define perf_instruction_pointer(regs) instruction_pointer(regs)
+# define perf_misc_flags(regs) \
+ (user_mode(regs) ? PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL)
+# define perf_instruction_pointer(regs) instruction_pointer(regs)
#endif
extern int perf_output_begin(struct perf_output_handle *handle,
@@ -1180,9 +1174,9 @@
perf_bp_event(struct perf_event *event, void *data) { }
static inline int perf_register_guest_info_callbacks
-(struct perf_guest_info_callbacks *callbacks) { return 0; }
+(struct perf_guest_info_callbacks *callbacks) { return 0; }
static inline int perf_unregister_guest_info_callbacks
-(struct perf_guest_info_callbacks *callbacks) { return 0; }
+(struct perf_guest_info_callbacks *callbacks) { return 0; }
static inline void perf_event_mmap(struct vm_area_struct *vma) { }
static inline void perf_event_comm(struct task_struct *tsk) { }
@@ -1195,23 +1189,22 @@
static inline void perf_event_task_tick(void) { }
#endif
-#define perf_output_put(handle, x) \
- perf_output_copy((handle), &(x), sizeof(x))
+#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
/*
* This has to have a higher priority than migration_notifier in sched.c.
*/
-#define perf_cpu_notifier(fn) \
-do { \
- static struct notifier_block fn##_nb __cpuinitdata = \
- { .notifier_call = fn, .priority = CPU_PRI_PERF }; \
- fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \
- (void *)(unsigned long)smp_processor_id()); \
- fn(&fn##_nb, (unsigned long)CPU_STARTING, \
- (void *)(unsigned long)smp_processor_id()); \
- fn(&fn##_nb, (unsigned long)CPU_ONLINE, \
- (void *)(unsigned long)smp_processor_id()); \
- register_cpu_notifier(&fn##_nb); \
+#define perf_cpu_notifier(fn) \
+do { \
+ static struct notifier_block fn##_nb __cpuinitdata = \
+ { .notifier_call = fn, .priority = CPU_PRI_PERF }; \
+ fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \
+ (void *)(unsigned long)smp_processor_id()); \
+ fn(&fn##_nb, (unsigned long)CPU_STARTING, \
+ (void *)(unsigned long)smp_processor_id()); \
+ fn(&fn##_nb, (unsigned long)CPU_ONLINE, \
+ (void *)(unsigned long)smp_processor_id()); \
+ register_cpu_notifier(&fn##_nb); \
} while (0)
#endif /* __KERNEL__ */
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index 3a02e02..c533670 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -588,4 +588,19 @@
#define SFB_MAX_PROB 0xFFFF
+/* QFQ */
+enum {
+ TCA_QFQ_UNSPEC,
+ TCA_QFQ_WEIGHT,
+ TCA_QFQ_LMAX,
+ __TCA_QFQ_MAX
+};
+
+#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1)
+
+struct tc_qfq_stats {
+ __u32 weight;
+ __u32 lmax;
+};
+
#endif
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 744942c..ede1a80 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -150,9 +150,6 @@
struct resource *res, unsigned int n_res,
const void *data, size_t size);
-extern const struct dev_pm_ops * platform_bus_get_pm_ops(void);
-extern void platform_bus_set_pm_ops(const struct dev_pm_ops *pm);
-
/* early platform driver interface */
struct early_platform_driver {
const char *class_str;
@@ -205,4 +202,64 @@
}
#endif /* MODULE */
+#ifdef CONFIG_PM_SLEEP
+extern int platform_pm_prepare(struct device *dev);
+extern void platform_pm_complete(struct device *dev);
+#else
+#define platform_pm_prepare NULL
+#define platform_pm_complete NULL
+#endif
+
+#ifdef CONFIG_SUSPEND
+extern int platform_pm_suspend(struct device *dev);
+extern int platform_pm_suspend_noirq(struct device *dev);
+extern int platform_pm_resume(struct device *dev);
+extern int platform_pm_resume_noirq(struct device *dev);
+#else
+#define platform_pm_suspend NULL
+#define platform_pm_resume NULL
+#define platform_pm_suspend_noirq NULL
+#define platform_pm_resume_noirq NULL
+#endif
+
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+extern int platform_pm_freeze(struct device *dev);
+extern int platform_pm_freeze_noirq(struct device *dev);
+extern int platform_pm_thaw(struct device *dev);
+extern int platform_pm_thaw_noirq(struct device *dev);
+extern int platform_pm_poweroff(struct device *dev);
+extern int platform_pm_poweroff_noirq(struct device *dev);
+extern int platform_pm_restore(struct device *dev);
+extern int platform_pm_restore_noirq(struct device *dev);
+#else
+#define platform_pm_freeze NULL
+#define platform_pm_thaw NULL
+#define platform_pm_poweroff NULL
+#define platform_pm_restore NULL
+#define platform_pm_freeze_noirq NULL
+#define platform_pm_thaw_noirq NULL
+#define platform_pm_poweroff_noirq NULL
+#define platform_pm_restore_noirq NULL
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+#define USE_PLATFORM_PM_SLEEP_OPS \
+ .prepare = platform_pm_prepare, \
+ .complete = platform_pm_complete, \
+ .suspend = platform_pm_suspend, \
+ .resume = platform_pm_resume, \
+ .freeze = platform_pm_freeze, \
+ .thaw = platform_pm_thaw, \
+ .poweroff = platform_pm_poweroff, \
+ .restore = platform_pm_restore, \
+ .suspend_noirq = platform_pm_suspend_noirq, \
+ .resume_noirq = platform_pm_resume_noirq, \
+ .freeze_noirq = platform_pm_freeze_noirq, \
+ .thaw_noirq = platform_pm_thaw_noirq, \
+ .poweroff_noirq = platform_pm_poweroff_noirq, \
+ .restore_noirq = platform_pm_restore_noirq,
+#else
+#define USE_PLATFORM_PM_SLEEP_OPS
+#endif
+
#endif /* _PLATFORM_DEVICE_H_ */
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 512e091..3160648 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -460,6 +460,7 @@
unsigned long active_jiffies;
unsigned long suspended_jiffies;
unsigned long accounting_timestamp;
+ void *subsys_data; /* Owned by the subsystem. */
#endif
};
@@ -529,21 +530,17 @@
*/
#ifdef CONFIG_PM_SLEEP
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-extern int sysdev_suspend(pm_message_t state);
-extern int sysdev_resume(void);
-#else
-static inline int sysdev_suspend(pm_message_t state) { return 0; }
-static inline int sysdev_resume(void) { return 0; }
-#endif
-
extern void device_pm_lock(void);
extern void dpm_resume_noirq(pm_message_t state);
extern void dpm_resume_end(pm_message_t state);
+extern void dpm_resume(pm_message_t state);
+extern void dpm_complete(pm_message_t state);
extern void device_pm_unlock(void);
extern int dpm_suspend_noirq(pm_message_t state);
extern int dpm_suspend_start(pm_message_t state);
+extern int dpm_suspend(pm_message_t state);
+extern int dpm_prepare(pm_message_t state);
extern void __suspend_report_result(const char *function, void *fn, int ret);
@@ -553,6 +550,16 @@
} while (0)
extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
+
+extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume(struct device *dev);
+extern int pm_generic_freeze(struct device *dev);
+extern int pm_generic_thaw(struct device *dev);
+extern int pm_generic_restore(struct device *dev);
+extern int pm_generic_poweroff(struct device *dev);
+extern void pm_generic_complete(struct device *dev);
+
#else /* !CONFIG_PM_SLEEP */
#define device_pm_lock() do {} while (0)
@@ -569,6 +576,15 @@
{
return 0;
}
+
+#define pm_generic_prepare NULL
+#define pm_generic_suspend NULL
+#define pm_generic_resume NULL
+#define pm_generic_freeze NULL
+#define pm_generic_thaw NULL
+#define pm_generic_restore NULL
+#define pm_generic_poweroff NULL
+#define pm_generic_complete NULL
#endif /* !CONFIG_PM_SLEEP */
/* How to reorder dpm_list after device_move() */
@@ -579,11 +595,4 @@
DPM_ORDER_DEV_LAST,
};
-extern int pm_generic_suspend(struct device *dev);
-extern int pm_generic_resume(struct device *dev);
-extern int pm_generic_freeze(struct device *dev);
-extern int pm_generic_thaw(struct device *dev);
-extern int pm_generic_restore(struct device *dev);
-extern int pm_generic_poweroff(struct device *dev);
-
#endif /* _LINUX_PM_H */
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 8de9aa6..878cf84 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -245,4 +245,46 @@
__pm_runtime_use_autosuspend(dev, false);
}
+struct pm_clk_notifier_block {
+ struct notifier_block nb;
+ struct dev_power_domain *pwr_domain;
+ char *con_ids[];
+};
+
+#ifdef CONFIG_PM_RUNTIME_CLK
+extern int pm_runtime_clk_init(struct device *dev);
+extern void pm_runtime_clk_destroy(struct device *dev);
+extern int pm_runtime_clk_add(struct device *dev, const char *con_id);
+extern void pm_runtime_clk_remove(struct device *dev, const char *con_id);
+extern int pm_runtime_clk_suspend(struct device *dev);
+extern int pm_runtime_clk_resume(struct device *dev);
+#else
+static inline int pm_runtime_clk_init(struct device *dev)
+{
+ return -EINVAL;
+}
+static inline void pm_runtime_clk_destroy(struct device *dev)
+{
+}
+static inline int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+ return -EINVAL;
+}
+static inline void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+}
+#define pm_runtime_clock_suspend NULL
+#define pm_runtime_clock_resume NULL
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+extern void pm_runtime_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb);
+#else
+static inline void pm_runtime_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb)
+{
+}
+#endif
+
#endif
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index d51243a..808227d 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -5,6 +5,7 @@
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/timex.h>
+#include <linux/alarmtimer.h>
union cpu_time_count {
cputime_t cpu;
@@ -80,6 +81,7 @@
unsigned long incr;
unsigned long expires;
} mmtimer;
+ struct alarm alarmtimer;
} it;
};
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 838c114..eaf4350 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -208,6 +208,8 @@
struct proc_dir_entry *parent,const char *dest) {return NULL;}
static inline struct proc_dir_entry *proc_mkdir(const char *name,
struct proc_dir_entry *parent) {return NULL;}
+static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
+ mode_t mode, struct proc_dir_entry *parent) { return NULL; }
static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
mode_t mode, struct proc_dir_entry *base,
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index 4197773..2455ef2 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -35,7 +35,9 @@
struct mutex buf_mutex; /* serialize access to 'buf' */
char *buf;
size_t bufsize;
- size_t (*read)(u64 *id, enum pstore_type_id *type,
+ int (*open)(struct pstore_info *psi);
+ int (*close)(struct pstore_info *psi);
+ ssize_t (*read)(u64 *id, enum pstore_type_id *type,
struct timespec *time);
u64 (*write)(enum pstore_type_id type, size_t size);
int (*erase)(u64 id);
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index a1147e5..9178d5c 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -189,6 +189,10 @@
child->ptrace = current->ptrace;
__ptrace_link(child, current->parent);
}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ atomic_set(&child->ptrace_bp_refcnt, 1);
+#endif
}
/**
@@ -350,6 +354,13 @@
unsigned long args[6], unsigned int maxargs,
unsigned long *sp, unsigned long *pc);
-#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern int ptrace_get_breakpoints(struct task_struct *tsk);
+extern void ptrace_put_breakpoints(struct task_struct *tsk);
+#else
+static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+#endif /* __KERNEL */
#endif
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index 7066acb..033b507 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -136,6 +136,14 @@
#define RB_EMPTY_NODE(node) (rb_parent(node) == node)
#define RB_CLEAR_NODE(node) (rb_set_parent(node, node))
+static inline void rb_init_node(struct rb_node *rb)
+{
+ rb->rb_parent_color = 0;
+ rb->rb_right = NULL;
+ rb->rb_left = NULL;
+ RB_CLEAR_NODE(rb);
+}
+
extern void rb_insert_color(struct rb_node *, struct rb_root *);
extern void rb_erase(struct rb_node *, struct rb_root *);
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index 2dea94f..e3beb31 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -253,7 +253,7 @@
*/
#define list_for_each_entry_rcu(pos, head, member) \
for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
- prefetch(pos->member.next), &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
@@ -270,7 +270,7 @@
*/
#define list_for_each_continue_rcu(pos, head) \
for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \
- prefetch((pos)->next), (pos) != (head); \
+ (pos) != (head); \
(pos) = rcu_dereference_raw(list_next_rcu(pos)))
/**
@@ -284,7 +284,7 @@
*/
#define list_for_each_entry_continue_rcu(pos, head, member) \
for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \
- prefetch(pos->member.next), &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
/**
@@ -427,7 +427,7 @@
#define __hlist_for_each_rcu(pos, head) \
for (pos = rcu_dereference(hlist_first_rcu(head)); \
- pos && ({ prefetch(pos->next); 1; }); \
+ pos; \
pos = rcu_dereference(hlist_next_rcu(pos)))
/**
@@ -443,7 +443,7 @@
*/
#define hlist_for_each_entry_rcu(tpos, pos, head, member) \
for (pos = rcu_dereference_raw(hlist_first_rcu(head)); \
- pos && ({ prefetch(pos->next); 1; }) && \
+ pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
pos = rcu_dereference_raw(hlist_next_rcu(pos)))
@@ -460,7 +460,7 @@
*/
#define hlist_for_each_entry_rcu_bh(tpos, pos, head, member) \
for (pos = rcu_dereference_bh((head)->first); \
- pos && ({ prefetch(pos->next); 1; }) && \
+ pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
pos = rcu_dereference_bh(pos->next))
@@ -472,7 +472,7 @@
*/
#define hlist_for_each_entry_continue_rcu(tpos, pos, member) \
for (pos = rcu_dereference((pos)->next); \
- pos && ({ prefetch(pos->next); 1; }) && \
+ pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
pos = rcu_dereference(pos->next))
@@ -484,7 +484,7 @@
*/
#define hlist_for_each_entry_continue_rcu_bh(tpos, pos, member) \
for (pos = rcu_dereference_bh((pos)->next); \
- pos && ({ prefetch(pos->next); 1; }) && \
+ pos && \
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
pos = rcu_dereference_bh(pos->next))
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index ff422d2..99f9aa7 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -47,6 +47,18 @@
extern int rcutorture_runnable; /* for sysctl */
#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+extern void rcutorture_record_test_transition(void);
+extern void rcutorture_record_progress(unsigned long vernum);
+#else
+static inline void rcutorture_record_test_transition(void)
+{
+}
+static inline void rcutorture_record_progress(unsigned long vernum)
+{
+}
+#endif
+
#define UINT_CMP_GE(a, b) (UINT_MAX / 2 >= (a) - (b))
#define UINT_CMP_LT(a, b) (UINT_MAX / 2 < (a) - (b))
#define ULONG_CMP_GE(a, b) (ULONG_MAX / 2 >= (a) - (b))
@@ -68,7 +80,6 @@
extern void synchronize_sched(void);
extern void rcu_barrier_bh(void);
extern void rcu_barrier_sched(void);
-extern int sched_expedited_torture_stats(char *page);
static inline void __rcu_read_lock_bh(void)
{
@@ -774,6 +785,7 @@
static inline void debug_rcu_head_queue(struct rcu_head *head)
{
+ WARN_ON_ONCE((unsigned long)head & 0x3);
debug_object_activate(head, &rcuhead_debug_descr);
debug_object_active_state(head, &rcuhead_debug_descr,
STATE_RCU_HEAD_READY,
@@ -797,4 +809,60 @@
}
#endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+static __always_inline bool __is_kfree_rcu_offset(unsigned long offset)
+{
+ return offset < 4096;
+}
+
+static __always_inline
+void __kfree_rcu(struct rcu_head *head, unsigned long offset)
+{
+ typedef void (*rcu_callback)(struct rcu_head *);
+
+ BUILD_BUG_ON(!__builtin_constant_p(offset));
+
+ /* See the kfree_rcu() header comment. */
+ BUILD_BUG_ON(!__is_kfree_rcu_offset(offset));
+
+ call_rcu(head, (rcu_callback)offset);
+}
+
+extern void kfree(const void *);
+
+static inline void __rcu_reclaim(struct rcu_head *head)
+{
+ unsigned long offset = (unsigned long)head->func;
+
+ if (__is_kfree_rcu_offset(offset))
+ kfree((void *)head - offset);
+ else
+ head->func(head);
+}
+
+/**
+ * kfree_rcu() - kfree an object after a grace period.
+ * @ptr: pointer to kfree
+ * @rcu_head: the name of the struct rcu_head within the type of @ptr.
+ *
+ * Many rcu callbacks functions just call kfree() on the base structure.
+ * These functions are trivial, but their size adds up, and furthermore
+ * when they are used in a kernel module, that module must invoke the
+ * high-latency rcu_barrier() function at module-unload time.
+ *
+ * The kfree_rcu() function handles this issue. Rather than encoding a
+ * function address in the embedded rcu_head structure, kfree_rcu() instead
+ * encodes the offset of the rcu_head structure within the base structure.
+ * Because the functions are not allowed in the low-order 4096 bytes of
+ * kernel virtual memory, offsets up to 4095 bytes can be accommodated.
+ * If the offset is larger than 4095 bytes, a compile-time error will
+ * be generated in __kfree_rcu(). If this error is triggered, you can
+ * either fall back to use of call_rcu() or rearrange the structure to
+ * position the rcu_head structure into the first 4096 bytes.
+ *
+ * Note that the allowable offset might decrease in the future, for example,
+ * to allow something like kmem_cache_free_rcu().
+ */
+#define kfree_rcu(ptr, rcu_head) \
+ __kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
+
#endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index 30ebd7c..52b3e02 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -100,6 +100,14 @@
}
/*
+ * Take advantage of the fact that there is only one CPU, which
+ * allows us to ignore virtualization-based context switches.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+}
+
+/*
* Return the number of grace periods.
*/
static inline long rcu_batches_completed(void)
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 3a93348..e65d066 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -35,6 +35,16 @@
extern int rcu_needs_cpu(int cpu);
extern void rcu_cpu_stall_reset(void);
+/*
+ * Note a virtualization-based context switch. This is simply a
+ * wrapper around rcu_note_context_switch(), which allows TINY_RCU
+ * to save a few bytes.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+ rcu_note_context_switch(cpu);
+}
+
#ifdef CONFIG_TREE_PREEMPT_RCU
extern void exit_rcu(void);
@@ -58,9 +68,12 @@
extern void rcu_barrier(void);
+extern unsigned long rcutorture_testseq;
+extern unsigned long rcutorture_vernum;
extern long rcu_batches_completed(void);
extern long rcu_batches_completed_bh(void);
extern long rcu_batches_completed_sched(void);
+
extern void rcu_force_quiescent_state(void);
extern void rcu_bh_force_quiescent_state(void);
extern void rcu_sched_force_quiescent_state(void);
diff --git a/include/linux/rfkill-regulator.h b/include/linux/rfkill-regulator.h
new file mode 100644
index 0000000..aca36bc
--- /dev/null
+++ b/include/linux/rfkill-regulator.h
@@ -0,0 +1,48 @@
+/*
+ * rfkill-regulator.c - Regulator consumer driver for rfkill
+ *
+ * Copyright (C) 2009 Guiming Zhuo <gmzhuo@gmail.com>
+ * Copyright (C) 2011 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_RFKILL_REGULATOR_H
+#define __LINUX_RFKILL_REGULATOR_H
+
+/*
+ * Use "vrfkill" as supply id when declaring the regulator consumer:
+ *
+ * static struct regulator_consumer_supply pcap_regulator_V6_consumers [] = {
+ * { .dev_name = "rfkill-regulator.0", .supply = "vrfkill" },
+ * };
+ *
+ * If you have several regulator driven rfkill, you can append a numerical id to
+ * .dev_name as done above, and use the same id when declaring the platform
+ * device:
+ *
+ * static struct rfkill_regulator_platform_data ezx_rfkill_bt_data = {
+ * .name = "ezx-bluetooth",
+ * .type = RFKILL_TYPE_BLUETOOTH,
+ * };
+ *
+ * static struct platform_device a910_rfkill = {
+ * .name = "rfkill-regulator",
+ * .id = 0,
+ * .dev = {
+ * .platform_data = &ezx_rfkill_bt_data,
+ * },
+ * };
+ */
+
+#include <linux/rfkill.h>
+
+struct rfkill_regulator_platform_data {
+ char *name; /* the name for the rfkill switch */
+ enum rfkill_type type; /* the type as specified in rfkill.h */
+};
+
+#endif /* __LINUX_RFKILL_REGULATOR_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 18d63ce..885c4f2 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -360,7 +360,7 @@
extern signed long schedule_timeout_killable(signed long timeout);
extern signed long schedule_timeout_uninterruptible(signed long timeout);
asmlinkage void schedule(void);
-extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner);
+extern int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner);
struct nsproxy;
struct user_namespace;
@@ -653,9 +653,8 @@
* Bits in flags field of signal_struct.
*/
#define SIGNAL_STOP_STOPPED 0x00000001 /* job control stop in effect */
-#define SIGNAL_STOP_DEQUEUED 0x00000002 /* stop signal dequeued */
-#define SIGNAL_STOP_CONTINUED 0x00000004 /* SIGCONT since WCONTINUED reap */
-#define SIGNAL_GROUP_EXIT 0x00000008 /* group exit in progress */
+#define SIGNAL_STOP_CONTINUED 0x00000002 /* SIGCONT since WCONTINUED reap */
+#define SIGNAL_GROUP_EXIT 0x00000004 /* group exit in progress */
/*
* Pending notifications to parent.
*/
@@ -731,10 +730,6 @@
/* timestamps */
unsigned long long last_arrival,/* when we last ran on a cpu */
last_queued; /* when we were last queued to run */
-#ifdef CONFIG_SCHEDSTATS
- /* BKL stats */
- unsigned int bkl_count;
-#endif
};
#endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
@@ -868,6 +863,7 @@
struct sched_group {
struct sched_group *next; /* Must be a circular list */
+ atomic_t ref;
/*
* CPU power of this group, SCHED_LOAD_SCALE being max power for a
@@ -882,9 +878,6 @@
* NOTE: this field is variable length. (Allocated dynamically
* by attaching extra space to the end of the structure,
* depending on how many CPUs the kernel has booted up with)
- *
- * It is also be embedded into static data structures at build
- * time. (See 'struct static_sched_group' in kernel/sched.c)
*/
unsigned long cpumask[0];
};
@@ -894,17 +887,6 @@
return to_cpumask(sg->cpumask);
}
-enum sched_domain_level {
- SD_LV_NONE = 0,
- SD_LV_SIBLING,
- SD_LV_MC,
- SD_LV_BOOK,
- SD_LV_CPU,
- SD_LV_NODE,
- SD_LV_ALLNODES,
- SD_LV_MAX
-};
-
struct sched_domain_attr {
int relax_domain_level;
};
@@ -913,6 +895,8 @@
.relax_domain_level = -1, \
}
+extern int sched_domain_level_max;
+
struct sched_domain {
/* These fields must be setup */
struct sched_domain *parent; /* top domain must be null terminated */
@@ -930,7 +914,7 @@
unsigned int forkexec_idx;
unsigned int smt_gain;
int flags; /* See SD_* */
- enum sched_domain_level level;
+ int level;
/* Runtime fields. */
unsigned long last_balance; /* init to jiffies. units in jiffies */
@@ -973,6 +957,10 @@
#ifdef CONFIG_SCHED_DEBUG
char *name;
#endif
+ union {
+ void *private; /* used during construction */
+ struct rcu_head rcu; /* used during destruction */
+ };
unsigned int span_weight;
/*
@@ -981,9 +969,6 @@
* NOTE: this field is variable length. (Allocated dynamically
* by attaching extra space to the end of the structure,
* depending on how many CPUs the kernel has booted up with)
- *
- * It is also be embedded into static data structures at build
- * time. (See 'struct static_sched_domain' in kernel/sched.c)
*/
unsigned long span[0];
};
@@ -1048,8 +1033,12 @@
#define WF_FORK 0x02 /* child wakeup after fork */
#define ENQUEUE_WAKEUP 1
-#define ENQUEUE_WAKING 2
-#define ENQUEUE_HEAD 4
+#define ENQUEUE_HEAD 2
+#ifdef CONFIG_SMP
+#define ENQUEUE_WAKING 4 /* sched_class::task_waking was called */
+#else
+#define ENQUEUE_WAKING 0
+#endif
#define DEQUEUE_SLEEP 1
@@ -1067,12 +1056,11 @@
void (*put_prev_task) (struct rq *rq, struct task_struct *p);
#ifdef CONFIG_SMP
- int (*select_task_rq)(struct rq *rq, struct task_struct *p,
- int sd_flag, int flags);
+ int (*select_task_rq)(struct task_struct *p, int sd_flag, int flags);
void (*pre_schedule) (struct rq *this_rq, struct task_struct *task);
void (*post_schedule) (struct rq *this_rq);
- void (*task_waking) (struct rq *this_rq, struct task_struct *task);
+ void (*task_waking) (struct task_struct *task);
void (*task_woken) (struct rq *this_rq, struct task_struct *task);
void (*set_cpus_allowed)(struct task_struct *p,
@@ -1197,13 +1185,11 @@
unsigned int flags; /* per process flags, defined below */
unsigned int ptrace;
- int lock_depth; /* BKL lock depth */
-
#ifdef CONFIG_SMP
-#ifdef __ARCH_WANT_UNLOCKED_CTXSW
- int oncpu;
+ struct task_struct *wake_entry;
+ int on_cpu;
#endif
-#endif
+ int on_rq;
int prio, static_prio, normal_prio;
unsigned int rt_priority;
@@ -1264,6 +1250,7 @@
int exit_state;
int exit_code, exit_signal;
int pdeath_signal; /* The signal sent when the parent dies */
+ unsigned int group_stop; /* GROUP_STOP_*, siglock protected */
/* ??? */
unsigned int personality;
unsigned did_exec:1;
@@ -1274,6 +1261,7 @@
/* Revert to default priority/policy when forking */
unsigned sched_reset_on_fork:1;
+ unsigned sched_contributes_to_load:1;
pid_t pid;
pid_t tgid;
@@ -1537,6 +1525,9 @@
unsigned long memsw_nr_pages; /* uncharged mem+swap usage */
} memcg_batch;
#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ atomic_t ptrace_bp_refcnt;
+#endif
};
/* Future-safe accessor for struct task_struct's cpus_allowed. */
@@ -1780,6 +1771,17 @@
#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
#define used_math() tsk_used_math(current)
+/*
+ * task->group_stop flags
+ */
+#define GROUP_STOP_SIGMASK 0xffff /* signr of the last group stop */
+#define GROUP_STOP_PENDING (1 << 16) /* task should stop for group stop */
+#define GROUP_STOP_CONSUME (1 << 17) /* consume group stop count */
+#define GROUP_STOP_TRAPPING (1 << 18) /* switching from STOPPED to TRACED */
+#define GROUP_STOP_DEQUEUED (1 << 19) /* stop signal dequeued */
+
+extern void task_clear_group_stop_pending(struct task_struct *task);
+
#ifdef CONFIG_PREEMPT_RCU
#define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
@@ -2060,14 +2062,13 @@
extern int wake_up_state(struct task_struct *tsk, unsigned int state);
extern int wake_up_process(struct task_struct *tsk);
-extern void wake_up_new_task(struct task_struct *tsk,
- unsigned long clone_flags);
+extern void wake_up_new_task(struct task_struct *tsk);
#ifdef CONFIG_SMP
extern void kick_process(struct task_struct *tsk);
#else
static inline void kick_process(struct task_struct *tsk) { }
#endif
-extern void sched_fork(struct task_struct *p, int clone_flags);
+extern void sched_fork(struct task_struct *p);
extern void sched_dead(struct task_struct *p);
extern void proc_caches_init(void);
@@ -2192,8 +2193,10 @@
extern char *get_task_comm(char *to, struct task_struct *tsk);
#ifdef CONFIG_SMP
+void scheduler_ipi(void);
extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
#else
+static inline void scheduler_ipi(void) { }
static inline unsigned long wait_task_inactive(struct task_struct *p,
long match_state)
{
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index e98cd2e..06d6964 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -88,12 +88,12 @@
unsigned ret;
repeat:
- ret = sl->sequence;
- smp_rmb();
+ ret = ACCESS_ONCE(sl->sequence);
if (unlikely(ret & 1)) {
cpu_relax();
goto repeat;
}
+ smp_rmb();
return ret;
}
diff --git a/include/linux/signal.h b/include/linux/signal.h
index fcd2b14..a822300 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -7,6 +7,8 @@
#ifdef __KERNEL__
#include <linux/list.h>
+struct task_struct;
+
/* for sysctl */
extern int print_fatal_signals;
/*
@@ -123,13 +125,13 @@
#define _sig_and(x,y) ((x) & (y))
_SIG_SET_BINOP(sigandsets, _sig_and)
-#define _sig_nand(x,y) ((x) & ~(y))
-_SIG_SET_BINOP(signandsets, _sig_nand)
+#define _sig_andn(x,y) ((x) & ~(y))
+_SIG_SET_BINOP(sigandnsets, _sig_andn)
#undef _SIG_SET_BINOP
#undef _sig_or
#undef _sig_and
-#undef _sig_nand
+#undef _sig_andn
#define _SIG_SET_OP(name, op) \
static inline void name(sigset_t *set) \
@@ -234,6 +236,9 @@
return sig <= _NSIG ? 1 : 0;
}
+struct timespec;
+struct pt_regs;
+
extern int next_signal(struct sigpending *pending, sigset_t *mask);
extern int do_send_sig_info(int sig, struct siginfo *info,
struct task_struct *p, bool group);
@@ -242,10 +247,12 @@
extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
siginfo_t *info);
extern long do_sigpending(void __user *, unsigned long);
+extern int do_sigtimedwait(const sigset_t *, siginfo_t *,
+ const struct timespec *);
extern int sigprocmask(int, sigset_t *, sigset_t *);
+extern void set_current_blocked(const sigset_t *);
extern int show_unhandled_signals;
-struct pt_regs;
extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
extern void exit_signals(struct task_struct *tsk);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d0ae90a..79aafbb 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -391,8 +391,8 @@
__u32 rxhash;
+ __u16 queue_mapping;
kmemcheck_bitfield_begin(flags2);
- __u16 queue_mapping:16;
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 7144e8a..4dde70e 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -29,6 +29,7 @@
unsigned int irq_polarity;
unsigned int irq_type;
unsigned int flags;
+ unsigned int shift;
phy_interface_t phy_interface;
unsigned char mac[6];
};
diff --git a/include/linux/socket.h b/include/linux/socket.h
index d2b5e98..4ef98e4 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -333,5 +333,7 @@
extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
unsigned int flags, struct timespec *timeout);
+extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
+ unsigned int vlen, unsigned int flags);
#endif /* not kernel and not glibc */
#endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/spinlock_up.h b/include/linux/spinlock_up.h
index b14f6a9..a26e2fb 100644
--- a/include/linux/spinlock_up.h
+++ b/include/linux/spinlock_up.h
@@ -5,6 +5,8 @@
# error "please don't include this file directly"
#endif
+#include <asm/processor.h> /* for cpu_relax() */
+
/*
* include/linux/spinlock_up.h - UP-debug version of spinlocks.
*
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 9659eff5..252e4482 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -308,7 +308,7 @@
/* ID information about the Chip. */
u16 chip_id;
- u16 chip_rev;
+ u8 chip_rev;
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
@@ -404,7 +404,9 @@
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+extern int ssb_arch_register_fallback_sprom(
+ int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out));
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
@@ -518,6 +520,7 @@
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+extern void ssb_commit_settings(struct ssb_bus *bus);
/* Various helper functions */
extern u32 ssb_admatch_base(u32 adm);
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 2cdf249..a08d693 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -123,6 +123,8 @@
#define SSB_CHIPCO_FLASHDATA 0x0048
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
+#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
#define SSB_CHIPCO_GPIOIN 0x0060
#define SSB_CHIPCO_GPIOOUT 0x0064
#define SSB_CHIPCO_GPIOOUTEN 0x0068
@@ -131,6 +133,9 @@
#define SSB_CHIPCO_GPIOIRQ 0x0074
#define SSB_CHIPCO_WATCHDOG 0x0080
#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
+#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
+#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
#define SSB_CHIPCO_CLOCK_N 0x0090
@@ -189,8 +194,10 @@
#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
+#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
+#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define SSB_CHIPCO_UART0_DATA 0x0300
#define SSB_CHIPCO_UART0_IMR 0x0304
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 402955a..efbf459 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,7 +97,7 @@
#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
#define SSB_TMSLOW 0x0F98 /* SB Target State Low */
#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
+#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index f29197a..9529e49 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -26,6 +26,8 @@
#ifndef __STMMAC_PLATFORM_DATA
#define __STMMAC_PLATFORM_DATA
+#include <linux/platform_device.h>
+
/* platform data for platform device structure's platform_data field */
/* Private data for the STM on-board ethernet driver */
diff --git a/include/linux/string.h b/include/linux/string.h
index a716ee2..a176db2 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -123,6 +123,7 @@
extern void argv_free(char **argv);
extern bool sysfs_streq(const char *s1, const char *s2);
+extern int strtobool(const char *s, bool *res);
#ifdef CONFIG_BINARY_PRINTF
int vbin_printf(u32 *bin_buf, size_t size, const char *fmt, va_list args);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 83ecc17..ab71447 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -610,6 +610,8 @@
asmlinkage long sys_sendto(int, void __user *, size_t, unsigned,
struct sockaddr __user *, int);
asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg,
+ unsigned int vlen, unsigned flags);
asmlinkage long sys_recv(int, void __user *, size_t, unsigned);
asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
struct sockaddr __user *, int __user *);
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index dfb078d..d35e783 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -34,12 +34,6 @@
struct list_head drivers;
struct sysdev_class_attribute **attrs;
struct kset kset;
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
- /* Default operations for these types of devices */
- int (*shutdown)(struct sys_device *);
- int (*suspend)(struct sys_device *, pm_message_t state);
- int (*resume)(struct sys_device *);
-#endif
};
struct sysdev_class_attribute {
@@ -77,11 +71,6 @@
struct list_head entry;
int (*add)(struct sys_device *);
int (*remove)(struct sys_device *);
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
- int (*shutdown)(struct sys_device *);
- int (*suspend)(struct sys_device *, pm_message_t state);
- int (*resume)(struct sys_device *);
-#endif
};
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 30b8815..c3acda6 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -176,7 +176,6 @@
const unsigned char *name);
struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
void sysfs_put(struct sysfs_dirent *sd);
-void sysfs_printk_last_file(void);
/* Called to clear a ns tag when it is no longer valid */
void sysfs_exit_ns(enum kobj_ns_type type, const void *tag);
@@ -348,10 +347,6 @@
return 0;
}
-static inline void sysfs_printk_last_file(void)
-{
-}
-
#endif /* CONFIG_SYSFS */
#endif /* _SYSFS_H_ */
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 7071ec5..b004e55 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -140,12 +140,12 @@
*/
struct st_data_s {
unsigned long st_state;
- struct tty_struct *tty;
struct sk_buff *tx_skb;
#define ST_TX_SENDING 1
#define ST_TX_WAKEUP 2
unsigned long tx_state;
struct st_proto_s *list[ST_MAX_CHANNELS];
+ bool is_registered[ST_MAX_CHANNELS];
unsigned long rx_state;
unsigned long rx_count;
struct sk_buff *rx_skb;
@@ -155,6 +155,7 @@
unsigned char protos_registered;
unsigned long ll_state;
void *kim_data;
+ struct tty_struct *tty;
};
/*
diff --git a/include/linux/time.h b/include/linux/time.h
index 454a2620..b306178 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -126,6 +126,7 @@
struct timespec get_monotonic_coarse(void);
void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
struct timespec *wtom, struct timespec *sleep);
+void timekeeping_inject_sleeptime(struct timespec *delta);
#define CURRENT_TIME (current_kernel_time())
#define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 })
@@ -294,6 +295,8 @@
#define CLOCK_REALTIME_COARSE 5
#define CLOCK_MONOTONIC_COARSE 6
#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
/*
* The IDs of various hardware clocks:
diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h
index a520fd7..5088727 100644
--- a/include/linux/timerqueue.h
+++ b/include/linux/timerqueue.h
@@ -39,7 +39,7 @@
static inline void timerqueue_init(struct timerqueue_node *node)
{
- RB_CLEAR_NODE(&node->node);
+ rb_init_node(&node->node);
}
static inline void timerqueue_init_head(struct timerqueue_head *head)
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index a5b994a..f2d9009 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -101,7 +101,7 @@
* Limiting values for messages
*/
-#define TIPC_MAX_USER_MSG_SIZE 66000
+#define TIPC_MAX_USER_MSG_SIZE 66000U
/*
* Message importance levels
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index ebcfa4e..e95f523 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -469,33 +469,6 @@
}
/**
- * tracehook_notify_jctl - report about job control stop/continue
- * @notify: zero, %CLD_STOPPED or %CLD_CONTINUED
- * @why: %CLD_STOPPED or %CLD_CONTINUED
- *
- * This is called when we might call do_notify_parent_cldstop().
- *
- * @notify is zero if we would not ordinarily send a %SIGCHLD,
- * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD.
- *
- * @why is %CLD_STOPPED when about to stop for job control;
- * we are already in %TASK_STOPPED state, about to call schedule().
- * It might also be that we have just exited (check %PF_EXITING),
- * but need to report that a group-wide stop is complete.
- *
- * @why is %CLD_CONTINUED when waking up after job control stop and
- * ready to make a delayed @notify report.
- *
- * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal.
- *
- * Called with the siglock held.
- */
-static inline int tracehook_notify_jctl(int notify, int why)
-{
- return notify ?: (current->ptrace & PT_PTRACED) ? why : 0;
-}
-
-/**
* tracehook_finish_jctl - report about return from job control stop
*
* This is called by do_signal_stop() after wakeup.
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 97c84a5..d530a44 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -29,7 +29,7 @@
struct tracepoint {
const char *name; /* Tracepoint name */
- int state; /* State. */
+ struct jump_label_key key;
void (*regfunc)(void);
void (*unregfunc)(void);
struct tracepoint_func __rcu *funcs;
@@ -146,9 +146,7 @@
extern struct tracepoint __tracepoint_##name; \
static inline void trace_##name(proto) \
{ \
- JUMP_LABEL(&__tracepoint_##name.state, do_trace); \
- return; \
-do_trace: \
+ if (static_branch(&__tracepoint_##name.key)) \
__DO_TRACE(&__tracepoint_##name, \
TP_PROTO(data_proto), \
TP_ARGS(data_args), \
@@ -176,14 +174,14 @@
* structures, so we create an array of pointers that will be used for iteration
* on the tracepoints.
*/
-#define DEFINE_TRACE_FN(name, reg, unreg) \
- static const char __tpstrtab_##name[] \
- __attribute__((section("__tracepoints_strings"))) = #name; \
- struct tracepoint __tracepoint_##name \
- __attribute__((section("__tracepoints"))) = \
- { __tpstrtab_##name, 0, reg, unreg, NULL }; \
- static struct tracepoint * const __tracepoint_ptr_##name __used \
- __attribute__((section("__tracepoints_ptrs"))) = \
+#define DEFINE_TRACE_FN(name, reg, unreg) \
+ static const char __tpstrtab_##name[] \
+ __attribute__((section("__tracepoints_strings"))) = #name; \
+ struct tracepoint __tracepoint_##name \
+ __attribute__((section("__tracepoints"))) = \
+ { __tpstrtab_##name, JUMP_LABEL_INIT, reg, unreg, NULL };\
+ static struct tracepoint * const __tracepoint_ptr_##name __used \
+ __attribute__((section("__tracepoints_ptrs"))) = \
&__tracepoint_##name;
#define DEFINE_TRACE(name) \
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 05ef528..88fceb7 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -256,6 +256,8 @@
#define FLAG_RNDIS_PHYM_NOT_WIRELESS 0x0001
#define FLAG_RNDIS_PHYM_WIRELESS 0x0002
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS 1 /* poll status before control */
extern void rndis_status(struct usbnet *dev, struct urb *urb);
extern int
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 0e18550..605b0aa 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -68,6 +68,7 @@
# define EVENT_RX_PAUSED 5
# define EVENT_DEV_WAKING 6
# define EVENT_DEV_ASLEEP 7
+# define EVENT_DEV_OPEN 8
};
static inline struct usb_driver *driver_of(struct usb_interface *intf)
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index bebb8ef..4b69739 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -24,12 +24,26 @@
#ifndef _LINUX_WL12XX_H
#define _LINUX_WL12XX_H
-/* The board reference clock values */
+/* Reference clock values */
enum {
- WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
- WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
- WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
- WL12XX_REFCLOCK_54 = 3, /* 54 MHz */
+ WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
+ WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
+ WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
+ WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
+ WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+ WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+ WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
+ WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
+ WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
+ WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
+ WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
+ WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
+ WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
+ WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
};
struct wl12xx_platform_data {
@@ -38,8 +52,13 @@
int irq;
bool use_eeprom;
int board_ref_clock;
+ int board_tcxo_clock;
+ unsigned long platform_quirks;
};
+/* Platform does not support level trigger interrupts */
+#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0)
+
#ifdef CONFIG_WL12XX_PLATFORM_DATA
int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 23710aa..582e4ae 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -42,8 +42,6 @@
};
-#ifdef __KERNEL__
-
#include <linux/netdevice.h>
#include <net/if_inet6.h>
#include <net/ipv6.h>
@@ -61,16 +59,16 @@
void __user *arg);
extern int ipv6_chk_addr(struct net *net,
- struct in6_addr *addr,
+ const struct in6_addr *addr,
struct net_device *dev,
int strict);
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
extern int ipv6_chk_home_addr(struct net *net,
- struct in6_addr *addr);
+ const struct in6_addr *addr);
#endif
-extern int ipv6_chk_prefix(struct in6_addr *addr,
+extern int ipv6_chk_prefix(const struct in6_addr *addr,
struct net_device *dev);
extern struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net,
@@ -89,9 +87,9 @@
extern int ipv6_rcv_saddr_equal(const struct sock *sk,
const struct sock *sk2);
extern void addrconf_join_solict(struct net_device *dev,
- struct in6_addr *addr);
+ const struct in6_addr *addr);
extern void addrconf_leave_solict(struct inet6_dev *idev,
- struct in6_addr *addr);
+ const struct in6_addr *addr);
static inline unsigned long addrconf_timeout_fixup(u32 timeout,
unsigned unit)
@@ -158,15 +156,15 @@
/*
* anycast prototypes (anycast.c)
*/
-extern int ipv6_sock_ac_join(struct sock *sk,int ifindex,struct in6_addr *addr);
-extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex,struct in6_addr *addr);
+extern int ipv6_sock_ac_join(struct sock *sk,int ifindex, const struct in6_addr *addr);
+extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex, const struct in6_addr *addr);
extern void ipv6_sock_ac_close(struct sock *sk);
-extern int inet6_ac_check(struct sock *sk, struct in6_addr *addr, int ifindex);
+extern int inet6_ac_check(struct sock *sk, const struct in6_addr *addr, int ifindex);
-extern int ipv6_dev_ac_inc(struct net_device *dev, struct in6_addr *addr);
-extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, struct in6_addr *addr);
+extern int ipv6_dev_ac_inc(struct net_device *dev, const struct in6_addr *addr);
+extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr);
extern int ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
- struct in6_addr *addr);
+ const struct in6_addr *addr);
/* Device notifier */
@@ -285,4 +283,3 @@
#endif
#endif
-#endif
diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h
index 00c2eaa..03e6e94 100644
--- a/include/net/af_rxrpc.h
+++ b/include/net/af_rxrpc.h
@@ -12,8 +12,6 @@
#ifndef _NET_RXRPC_H
#define _NET_RXRPC_H
-#ifdef __KERNEL__
-
#include <linux/rxrpc.h>
struct rxrpc_call;
@@ -53,5 +51,4 @@
unsigned long);
extern int rxrpc_kernel_reject_call(struct socket *);
-#endif /* __KERNEL__ */
#endif /* _NET_RXRPC_H */
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 18e5c3f..91ab5b0 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -41,7 +41,6 @@
spin_lock_nested(&unix_sk(s)->lock, \
SINGLE_DEPTH_NESTING)
-#ifdef __KERNEL__
/* The AF_UNIX socket */
struct unix_sock {
/* WARNING: sk has to be the first member */
@@ -72,4 +71,3 @@
static inline void unix_sysctl_unregister(struct net *net) {}
#endif
#endif
-#endif
diff --git a/include/net/atmclip.h b/include/net/atmclip.h
index 467c531..497ef64 100644
--- a/include/net/atmclip.h
+++ b/include/net/atmclip.h
@@ -54,8 +54,6 @@
};
-#ifdef __KERNEL__
extern struct neigh_table *clip_tbl_hook;
-#endif
#endif
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 2c0d309..0c20227 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -246,6 +246,15 @@
#define HCI_AT_GENERAL_BONDING 0x04
#define HCI_AT_GENERAL_BONDING_MITM 0x05
+/* Link Key types */
+#define HCI_LK_COMBINATION 0x00
+#define HCI_LK_LOCAL_UNIT 0x01
+#define HCI_LK_REMOTE_UNIT 0x02
+#define HCI_LK_DEBUG_COMBINATION 0x03
+#define HCI_LK_UNAUTH_COMBINATION 0x04
+#define HCI_LK_AUTH_COMBINATION 0x05
+#define HCI_LK_CHANGED_COMBINATION 0x06
+
/* ----- HCI Commands ---- */
#define HCI_OP_NOP 0x0000
@@ -428,6 +437,18 @@
#define HCI_OP_USER_CONFIRM_NEG_REPLY 0x042d
+#define HCI_OP_REMOTE_OOB_DATA_REPLY 0x0430
+struct hci_cp_remote_oob_data_reply {
+ bdaddr_t bdaddr;
+ __u8 hash[16];
+ __u8 randomizer[16];
+} __packed;
+
+#define HCI_OP_REMOTE_OOB_DATA_NEG_REPLY 0x0433
+struct hci_cp_remote_oob_data_neg_reply {
+ bdaddr_t bdaddr;
+} __packed;
+
#define HCI_OP_IO_CAPABILITY_NEG_REPLY 0x0434
struct hci_cp_io_capability_neg_reply {
bdaddr_t bdaddr;
@@ -537,15 +558,17 @@
__u8 delete_all;
} __packed;
+#define HCI_MAX_NAME_LENGTH 248
+
#define HCI_OP_WRITE_LOCAL_NAME 0x0c13
struct hci_cp_write_local_name {
- __u8 name[248];
+ __u8 name[HCI_MAX_NAME_LENGTH];
} __packed;
#define HCI_OP_READ_LOCAL_NAME 0x0c14
struct hci_rp_read_local_name {
__u8 status;
- __u8 name[248];
+ __u8 name[HCI_MAX_NAME_LENGTH];
} __packed;
#define HCI_OP_WRITE_CA_TIMEOUT 0x0c16
@@ -602,6 +625,14 @@
#define HCI_OP_WRITE_INQUIRY_MODE 0x0c45
+#define HCI_MAX_EIR_LENGTH 240
+
+#define HCI_OP_WRITE_EIR 0x0c52
+struct hci_cp_write_eir {
+ uint8_t fec;
+ uint8_t data[HCI_MAX_EIR_LENGTH];
+} __packed;
+
#define HCI_OP_READ_SSP_MODE 0x0c55
struct hci_rp_read_ssp_mode {
__u8 status;
@@ -613,6 +644,13 @@
__u8 mode;
} __packed;
+#define HCI_OP_READ_LOCAL_OOB_DATA 0x0c57
+struct hci_rp_read_local_oob_data {
+ __u8 status;
+ __u8 hash[16];
+ __u8 randomizer[16];
+} __packed;
+
#define HCI_OP_READ_INQ_RSP_TX_POWER 0x0c58
#define HCI_OP_READ_LOCAL_VERSION 0x1001
@@ -747,7 +785,7 @@
struct hci_ev_remote_name {
__u8 status;
bdaddr_t bdaddr;
- __u8 name[248];
+ __u8 name[HCI_MAX_NAME_LENGTH];
} __packed;
#define HCI_EV_ENCRYPT_CHANGE 0x08
@@ -955,6 +993,11 @@
__le32 passkey;
} __packed;
+#define HCI_EV_REMOTE_OOB_DATA_REQUEST 0x35
+struct hci_ev_remote_oob_data_request {
+ bdaddr_t bdaddr;
+} __packed;
+
#define HCI_EV_SIMPLE_PAIR_COMPLETE 0x36
struct hci_ev_simple_pair_complete {
__u8 status;
@@ -1033,7 +1076,6 @@
__u8 dlen;
} __packed;
-#ifdef __KERNEL__
#include <linux/skbuff.h>
static inline struct hci_event_hdr *hci_event_hdr(const struct sk_buff *skb)
{
@@ -1049,7 +1091,6 @@
{
return (struct hci_sco_hdr *) skb->data;
}
-#endif
/* Command opcode pack/unpack */
#define hci_opcode_pack(ogf, ocf) (__u16) ((ocf & 0x03ff)|(ogf << 10))
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 441dadb..6c994c0 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -82,6 +82,13 @@
u8 pin_len;
};
+struct oob_data {
+ struct list_head list;
+ bdaddr_t bdaddr;
+ u8 hash[16];
+ u8 randomizer[16];
+};
+
#define NUM_REASSEMBLY 4
struct hci_dev {
struct list_head list;
@@ -94,7 +101,8 @@
__u8 bus;
__u8 dev_type;
bdaddr_t bdaddr;
- __u8 dev_name[248];
+ __u8 dev_name[HCI_MAX_NAME_LENGTH];
+ __u8 eir[HCI_MAX_EIR_LENGTH];
__u8 dev_class[3];
__u8 major_class;
__u8 minor_class;
@@ -118,6 +126,8 @@
__u16 sniff_min_interval;
__u16 sniff_max_interval;
+ unsigned int auto_accept_delay;
+
unsigned long quirks;
atomic_t cmd_cnt;
@@ -169,6 +179,8 @@
struct list_head link_keys;
+ struct list_head remote_oob_data;
+
struct hci_dev_stats stat;
struct sk_buff_head driver_init;
@@ -216,6 +228,7 @@
__u16 pkt_type;
__u16 link_policy;
__u32 link_mode;
+ __u8 key_type;
__u8 auth_type;
__u8 sec_level;
__u8 pending_sec_level;
@@ -235,6 +248,7 @@
struct timer_list disc_timer;
struct timer_list idle_timer;
+ struct timer_list auto_accept_timer;
struct work_struct work_add;
struct work_struct work_del;
@@ -408,6 +422,7 @@
struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
int hci_conn_check_link_mode(struct hci_conn *conn);
+int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
int hci_conn_change_link_key(struct hci_conn *conn);
int hci_conn_switch_role(struct hci_conn *conn, __u8 role);
@@ -501,10 +516,17 @@
int hci_link_keys_clear(struct hci_dev *hdev);
struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr);
-int hci_add_link_key(struct hci_dev *hdev, int new_key, bdaddr_t *bdaddr,
- u8 *key, u8 type, u8 pin_len);
+int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key,
+ bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len);
int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_remote_oob_data_clear(struct hci_dev *hdev);
+struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev,
+ bdaddr_t *bdaddr);
+int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash,
+ u8 *randomizer);
+int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
void hci_del_off_timer(struct hci_dev *hdev);
void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
@@ -754,19 +776,27 @@
int mgmt_powered(u16 index, u8 powered);
int mgmt_discoverable(u16 index, u8 discoverable);
int mgmt_connectable(u16 index, u8 connectable);
-int mgmt_new_key(u16 index, struct link_key *key, u8 old_key_type);
+int mgmt_new_key(u16 index, struct link_key *key, u8 persistent);
int mgmt_connected(u16 index, bdaddr_t *bdaddr);
int mgmt_disconnected(u16 index, bdaddr_t *bdaddr);
int mgmt_disconnect_failed(u16 index);
int mgmt_connect_failed(u16 index, bdaddr_t *bdaddr, u8 status);
-int mgmt_pin_code_request(u16 index, bdaddr_t *bdaddr);
+int mgmt_pin_code_request(u16 index, bdaddr_t *bdaddr, u8 secure);
int mgmt_pin_code_reply_complete(u16 index, bdaddr_t *bdaddr, u8 status);
int mgmt_pin_code_neg_reply_complete(u16 index, bdaddr_t *bdaddr, u8 status);
-int mgmt_user_confirm_request(u16 index, bdaddr_t *bdaddr, __le32 value);
+int mgmt_user_confirm_request(u16 index, bdaddr_t *bdaddr, __le32 value,
+ u8 confirm_hint);
int mgmt_user_confirm_reply_complete(u16 index, bdaddr_t *bdaddr, u8 status);
int mgmt_user_confirm_neg_reply_complete(u16 index, bdaddr_t *bdaddr,
u8 status);
int mgmt_auth_failed(u16 index, bdaddr_t *bdaddr, u8 status);
+int mgmt_set_local_name_complete(u16 index, u8 *name, u8 status);
+int mgmt_read_local_oob_data_reply_complete(u16 index, u8 *hash, u8 *randomizer,
+ u8 status);
+int mgmt_device_found(u16 index, bdaddr_t *bdaddr, u8 *dev_class, s8 rssi,
+ u8 *eir);
+int mgmt_remote_name(u16 index, bdaddr_t *bdaddr, u8 *name);
+int mgmt_discovering(u16 index, u8 discovering);
/* HCI info for socket */
#define hci_pi(sk) ((struct hci_pinfo *) sk)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 4f4bff1..d09c9b1 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -276,11 +276,81 @@
#define L2CAP_CONN_PARAM_ACCEPTED 0x0000
#define L2CAP_CONN_PARAM_REJECTED 0x0001
-/* ----- L2CAP connections ----- */
-struct l2cap_chan_list {
- struct sock *head;
- rwlock_t lock;
- long num;
+/* ----- L2CAP channels and connections ----- */
+struct srej_list {
+ __u8 tx_seq;
+ struct list_head list;
+};
+
+struct l2cap_chan {
+ struct sock *sk;
+
+ struct l2cap_conn *conn;
+
+ __le16 psm;
+ __u16 dcid;
+ __u16 scid;
+
+ __u16 imtu;
+ __u16 omtu;
+ __u16 flush_to;
+ __u8 mode;
+
+ __le16 sport;
+
+ __u8 sec_level;
+ __u8 role_switch;
+ __u8 force_reliable;
+ __u8 flushable;
+
+ __u8 ident;
+
+ __u8 conf_req[64];
+ __u8 conf_len;
+ __u8 num_conf_req;
+ __u8 num_conf_rsp;
+
+ __u8 fcs;
+
+ __u8 tx_win;
+ __u8 max_tx;
+ __u16 retrans_timeout;
+ __u16 monitor_timeout;
+ __u16 mps;
+
+ __u8 conf_state;
+ __u16 conn_state;
+
+ __u8 next_tx_seq;
+ __u8 expected_ack_seq;
+ __u8 expected_tx_seq;
+ __u8 buffer_seq;
+ __u8 buffer_seq_srej;
+ __u8 srej_save_reqseq;
+ __u8 frames_sent;
+ __u8 unacked_frames;
+ __u8 retry_count;
+ __u8 num_acked;
+ __u16 sdu_len;
+ __u16 partial_sdu_len;
+ struct sk_buff *sdu;
+
+ __u8 remote_tx_win;
+ __u8 remote_max_tx;
+ __u16 remote_mps;
+
+ struct timer_list retrans_timer;
+ struct timer_list monitor_timer;
+ struct timer_list ack_timer;
+ struct sk_buff *tx_send_head;
+ struct sk_buff_head tx_q;
+ struct sk_buff_head srej_q;
+ struct sk_buff_head busy_q;
+ struct work_struct busy_work;
+ struct list_head srej_l;
+
+ struct list_head list;
+ struct list_head global_l;
};
struct l2cap_conn {
@@ -302,97 +372,24 @@
struct sk_buff *rx_skb;
__u32 rx_len;
- __u8 rx_ident;
__u8 tx_ident;
__u8 disc_reason;
- struct l2cap_chan_list chan_list;
-};
-
-struct sock_del_list {
- struct sock *sk;
- struct list_head list;
+ struct list_head chan_l;
+ rwlock_t chan_lock;
};
#define L2CAP_INFO_CL_MTU_REQ_SENT 0x01
#define L2CAP_INFO_FEAT_MASK_REQ_SENT 0x04
#define L2CAP_INFO_FEAT_MASK_REQ_DONE 0x08
-/* ----- L2CAP channel and socket info ----- */
+/* ----- L2CAP socket info ----- */
#define l2cap_pi(sk) ((struct l2cap_pinfo *) sk)
-#define TX_QUEUE(sk) (&l2cap_pi(sk)->tx_queue)
-#define SREJ_QUEUE(sk) (&l2cap_pi(sk)->srej_queue)
-#define BUSY_QUEUE(sk) (&l2cap_pi(sk)->busy_queue)
-#define SREJ_LIST(sk) (&l2cap_pi(sk)->srej_l.list)
-
-struct srej_list {
- __u8 tx_seq;
- struct list_head list;
-};
struct l2cap_pinfo {
struct bt_sock bt;
- __le16 psm;
- __u16 dcid;
- __u16 scid;
-
- __u16 imtu;
- __u16 omtu;
- __u16 flush_to;
- __u8 mode;
- __u8 num_conf_req;
- __u8 num_conf_rsp;
-
- __u8 fcs;
- __u8 sec_level;
- __u8 role_switch;
- __u8 force_reliable;
- __u8 flushable;
-
- __u8 conf_req[64];
- __u8 conf_len;
- __u8 conf_state;
- __u16 conn_state;
-
- __u8 next_tx_seq;
- __u8 expected_ack_seq;
- __u8 expected_tx_seq;
- __u8 buffer_seq;
- __u8 buffer_seq_srej;
- __u8 srej_save_reqseq;
- __u8 frames_sent;
- __u8 unacked_frames;
- __u8 retry_count;
- __u8 num_acked;
- __u16 sdu_len;
- __u16 partial_sdu_len;
- struct sk_buff *sdu;
-
- __u8 ident;
-
- __u8 tx_win;
- __u8 max_tx;
- __u8 remote_tx_win;
- __u8 remote_max_tx;
- __u16 retrans_timeout;
- __u16 monitor_timeout;
- __u16 remote_mps;
- __u16 mps;
-
- __le16 sport;
-
- struct timer_list retrans_timer;
- struct timer_list monitor_timer;
- struct timer_list ack_timer;
- struct sk_buff_head tx_queue;
- struct sk_buff_head srej_queue;
- struct sk_buff_head busy_queue;
- struct work_struct busy_work;
- struct srej_list srej_l;
- struct l2cap_conn *conn;
- struct sock *next_c;
- struct sock *prev_c;
+ struct l2cap_chan *chan;
};
#define L2CAP_CONF_REQ_SENT 0x01
@@ -419,24 +416,23 @@
#define L2CAP_CONN_RNR_SENT 0x0200
#define L2CAP_CONN_SAR_RETRY 0x0400
-#define __mod_retrans_timer() mod_timer(&l2cap_pi(sk)->retrans_timer, \
+#define __mod_retrans_timer() mod_timer(&chan->retrans_timer, \
jiffies + msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
-#define __mod_monitor_timer() mod_timer(&l2cap_pi(sk)->monitor_timer, \
+#define __mod_monitor_timer() mod_timer(&chan->monitor_timer, \
jiffies + msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
-#define __mod_ack_timer() mod_timer(&l2cap_pi(sk)->ack_timer, \
+#define __mod_ack_timer() mod_timer(&chan->ack_timer, \
jiffies + msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO));
-static inline int l2cap_tx_window_full(struct sock *sk)
+static inline int l2cap_tx_window_full(struct l2cap_chan *ch)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
int sub;
- sub = (pi->next_tx_seq - pi->expected_ack_seq) % 64;
+ sub = (ch->next_tx_seq - ch->expected_ack_seq) % 64;
if (sub < 0)
sub += 64;
- return sub == pi->remote_tx_win;
+ return sub == ch->remote_tx_win;
}
#define __get_txseq(ctrl) (((ctrl) & L2CAP_CTRL_TXSEQ) >> 1)
@@ -446,24 +442,24 @@
#define __is_sar_start(ctrl) (((ctrl) & L2CAP_CTRL_SAR) == L2CAP_SDU_START)
extern int disable_ertm;
-extern const struct proto_ops l2cap_sock_ops;
-extern struct bt_sock_list l2cap_sk_list;
int l2cap_init_sockets(void);
void l2cap_cleanup_sockets(void);
-u8 l2cap_get_ident(struct l2cap_conn *conn);
void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len, void *data);
-int l2cap_build_conf_req(struct sock *sk, void *data);
+void __l2cap_connect_rsp_defer(struct l2cap_chan *chan);
int __l2cap_wait_ack(struct sock *sk);
-struct sk_buff *l2cap_create_connless_pdu(struct sock *sk, struct msghdr *msg, size_t len);
-struct sk_buff *l2cap_create_basic_pdu(struct sock *sk, struct msghdr *msg, size_t len);
-struct sk_buff *l2cap_create_iframe_pdu(struct sock *sk, struct msghdr *msg, size_t len, u16 control, u16 sdulen);
-int l2cap_sar_segment_sdu(struct sock *sk, struct msghdr *msg, size_t len);
-void l2cap_do_send(struct sock *sk, struct sk_buff *skb);
-void l2cap_streaming_send(struct sock *sk);
-int l2cap_ertm_send(struct sock *sk);
+struct sk_buff *l2cap_create_connless_pdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len);
+struct sk_buff *l2cap_create_basic_pdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len);
+struct sk_buff *l2cap_create_iframe_pdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len, u16 control, u16 sdulen);
+int l2cap_sar_segment_sdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len);
+void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb);
+void l2cap_streaming_send(struct l2cap_chan *chan);
+int l2cap_ertm_send(struct l2cap_chan *chan);
+
+int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm);
+int l2cap_add_scid(struct l2cap_chan *chan, __u16 scid);
void l2cap_sock_set_timer(struct sock *sk, long timeout);
void l2cap_sock_clear_timer(struct sock *sk);
@@ -472,8 +468,10 @@
void l2cap_sock_init(struct sock *sk, struct sock *parent);
struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock,
int proto, gfp_t prio);
-void l2cap_send_disconn_req(struct l2cap_conn *conn, struct sock *sk, int err);
-void l2cap_chan_del(struct sock *sk, int err);
-int l2cap_do_connect(struct sock *sk);
+void l2cap_send_disconn_req(struct l2cap_conn *conn, struct l2cap_chan *chan, int err);
+struct l2cap_chan *l2cap_chan_create(struct sock *sk);
+void l2cap_chan_del(struct l2cap_chan *chan, int err);
+void l2cap_chan_destroy(struct l2cap_chan *chan);
+int l2cap_chan_connect(struct l2cap_chan *chan);
#endif /* __L2CAP_H */
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index 5fabfa8..4899286 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -41,6 +41,10 @@
__le16 index[0];
} __packed;
+/* Reserve one extra byte for names in management messages so that they
+ * are always guaranteed to be nul-terminated */
+#define MGMT_MAX_NAME_LENGTH (HCI_MAX_NAME_LENGTH + 1)
+
#define MGMT_OP_READ_INFO 0x0004
struct mgmt_rp_read_info {
__u8 type;
@@ -55,6 +59,7 @@
__u16 manufacturer;
__u8 hci_ver;
__u16 hci_rev;
+ __u8 name[MGMT_MAX_NAME_LENGTH];
} __packed;
struct mgmt_mode {
@@ -167,6 +172,33 @@
#define MGMT_OP_USER_CONFIRM_NEG_REPLY 0x0016
+#define MGMT_OP_SET_LOCAL_NAME 0x0017
+struct mgmt_cp_set_local_name {
+ __u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+#define MGMT_OP_READ_LOCAL_OOB_DATA 0x0018
+struct mgmt_rp_read_local_oob_data {
+ __u8 hash[16];
+ __u8 randomizer[16];
+} __packed;
+
+#define MGMT_OP_ADD_REMOTE_OOB_DATA 0x0019
+struct mgmt_cp_add_remote_oob_data {
+ bdaddr_t bdaddr;
+ __u8 hash[16];
+ __u8 randomizer[16];
+} __packed;
+
+#define MGMT_OP_REMOVE_REMOTE_OOB_DATA 0x001A
+struct mgmt_cp_remove_remote_oob_data {
+ bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_OP_START_DISCOVERY 0x001B
+
+#define MGMT_OP_STOP_DISCOVERY 0x001C
+
#define MGMT_EV_CMD_COMPLETE 0x0001
struct mgmt_ev_cmd_complete {
__le16 opcode;
@@ -198,8 +230,8 @@
#define MGMT_EV_NEW_KEY 0x000A
struct mgmt_ev_new_key {
+ __u8 store_hint;
struct mgmt_key_info key;
- __u8 old_key_type;
} __packed;
#define MGMT_EV_CONNECTED 0x000B
@@ -221,11 +253,13 @@
#define MGMT_EV_PIN_CODE_REQUEST 0x000E
struct mgmt_ev_pin_code_request {
bdaddr_t bdaddr;
+ __u8 secure;
} __packed;
#define MGMT_EV_USER_CONFIRM_REQUEST 0x000F
struct mgmt_ev_user_confirm_request {
bdaddr_t bdaddr;
+ __u8 confirm_hint;
__le32 value;
} __packed;
@@ -234,3 +268,24 @@
bdaddr_t bdaddr;
__u8 status;
} __packed;
+
+#define MGMT_EV_LOCAL_NAME_CHANGED 0x0011
+struct mgmt_ev_local_name_changed {
+ __u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+#define MGMT_EV_DEVICE_FOUND 0x0012
+struct mgmt_ev_device_found {
+ bdaddr_t bdaddr;
+ __u8 dev_class[3];
+ __s8 rssi;
+ __u8 eir[HCI_MAX_EIR_LENGTH];
+} __packed;
+
+#define MGMT_EV_REMOTE_NAME 0x0013
+struct mgmt_ev_remote_name {
+ bdaddr_t bdaddr;
+ __u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+#define MGMT_EV_DISCOVERING 0x0014
diff --git a/include/net/caif/caif_dev.h b/include/net/caif/caif_dev.h
index 8eff83b..c011281 100644
--- a/include/net/caif/caif_dev.h
+++ b/include/net/caif/caif_dev.h
@@ -11,6 +11,7 @@
#include <net/caif/cfcnfg.h>
#include <linux/caif/caif_socket.h>
#include <linux/if.h>
+#include <linux/net.h>
/**
* struct caif_param - CAIF parameters.
@@ -62,46 +63,45 @@
* E.g. CAIF Socket will call this function for each socket it connects
* and have one client_layer instance for each socket.
*/
-int caif_connect_client(struct caif_connect_request *conn_req,
+int caif_connect_client(struct net *net,
+ struct caif_connect_request *conn_req,
struct cflayer *client_layer, int *ifindex,
int *headroom, int *tailroom);
/**
* caif_disconnect_client - Disconnects a client from the CAIF stack.
*
+ * @client_layer: Client layer to be disconnected.
+ */
+int caif_disconnect_client(struct net *net, struct cflayer *client_layer);
+
+
+/**
+ * caif_client_register_refcnt - register ref-count functions provided by client.
+ *
+ * @adapt_layer: Client layer using CAIF Stack.
+ * @hold: Function provided by client layer increasing ref-count
+ * @put: Function provided by client layer decreasing ref-count
+ *
+ * Client of the CAIF Stack must register functions for reference counting.
+ * These functions are called by the CAIF Stack for every upstream packet,
+ * and must therefore be implemented efficiently.
+ *
+ * Client should call caif_free_client when reference count degrease to zero.
+ */
+
+void caif_client_register_refcnt(struct cflayer *adapt_layer,
+ void (*hold)(struct cflayer *lyr),
+ void (*put)(struct cflayer *lyr));
+/**
+ * caif_free_client - Free memory used to manage the client in the CAIF Stack.
+ *
* @client_layer: Client layer to be removed.
- */
-int caif_disconnect_client(struct cflayer *client_layer);
-
-/**
- * caif_release_client - Release adaptation layer reference to client.
*
- * @client_layer: Client layer.
- *
- * Releases a client/adaptation layer use of the caif stack.
- * This function must be used after caif_disconnect_client to
- * decrease the reference count of the service layer.
+ * This function must be called from client layer in order to free memory.
+ * Caller must guarantee that no packets are in flight upstream when calling
+ * this function.
*/
-void caif_release_client(struct cflayer *client_layer);
-
-/**
- * connect_req_to_link_param - Translate configuration parameters
- * from socket format to internal format.
- * @cnfg: Pointer to configuration handler
- * @con_req: Configuration parameters supplied in function
- * caif_connect_client
- * @channel_setup_param: Parameters supplied to the CAIF Core stack for
- * setting up channels.
- *
- */
-int connect_req_to_link_param(struct cfcnfg *cnfg,
- struct caif_connect_request *con_req,
- struct cfctrl_link_param *channel_setup_param);
-
-/**
- * get_caif_conf() - Get the configuration handler.
- */
-struct cfcnfg *get_caif_conf(void);
-
+void caif_free_client(struct cflayer *adap_layer);
#endif /* CAIF_DEV_H_ */
diff --git a/include/net/caif/cfcnfg.h b/include/net/caif/cfcnfg.h
index f33d363..3e93a4a 100644
--- a/include/net/caif/cfcnfg.h
+++ b/include/net/caif/cfcnfg.h
@@ -46,6 +46,12 @@
};
/**
+ * cfcnfg_create() - Get the CAIF configuration object given network.
+ * @net: Network for the CAIF configuration object.
+ */
+struct cfcnfg *get_cfcnfg(struct net *net);
+
+/**
* cfcnfg_create() - Create the CAIF configuration object.
*/
struct cfcnfg *cfcnfg_create(void);
@@ -65,17 +71,15 @@
* @dev: Pointer to link layer device
* @phy_layer: Specify the physical layer. The transmit function
* MUST be set in the structure.
- * @phyid: The assigned physical ID for this layer, used in
- * cfcnfg_add_adapt_layer to specify PHY for the link.
* @pref: The phy (link layer) preference.
* @fcs: Specify if checksum is used in CAIF Framing Layer.
- * @stx: Specify if Start Of Frame extension is used.
+ * @stx: Specify if Start Of Frame eXtention is used.
*/
void
cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
struct net_device *dev, struct cflayer *phy_layer,
- u16 *phyid, enum cfcnfg_phy_preference pref,
+ enum cfcnfg_phy_preference pref,
bool fcs, bool stx);
/**
@@ -88,61 +92,12 @@
int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer);
/**
- * cfcnfg_disconn_adapt_layer - Disconnects an adaptation layer.
- *
- * @cnfg: Pointer to a CAIF configuration object, created by
- * cfcnfg_create().
- * @adap_layer: Adaptation layer to be removed.
- */
-int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg,
- struct cflayer *adap_layer);
-
-/**
- * cfcnfg_release_adap_layer - Used by client to release the adaptation layer.
- *
- * @adap_layer: Adaptation layer.
- */
-void cfcnfg_release_adap_layer(struct cflayer *adap_layer);
-
-/**
- * cfcnfg_add_adaptation_layer - Add an adaptation layer to the CAIF stack.
- *
- * The adaptation Layer is where the interface to application or higher-level
- * driver functionality is implemented.
- *
- * @cnfg: Pointer to a CAIF configuration object, created by
- * cfcnfg_create().
- * @param: Link setup parameters.
- * @adap_layer: Specify the adaptation layer; the receive and
- * flow-control functions MUST be set in the structure.
- * @ifindex: Link layer interface index used for this connection.
- * @proto_head: Protocol head-space needed by CAIF protocol,
- * excluding link layer.
- * @proto_tail: Protocol tail-space needed by CAIF protocol,
- * excluding link layer.
- */
-int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg,
- struct cfctrl_link_param *param,
- struct cflayer *adap_layer,
- int *ifindex,
- int *proto_head,
- int *proto_tail);
-
-/**
- * cfcnfg_get_phyid() - Get physical ID, given type.
- * Returns one of the physical interfaces matching the given type.
- * Zero if no match is found.
+ * cfcnfg_set_phy_state() - Set the state of the physical interface device.
* @cnfg: Configuration object
- * @phy_pref: Caif Link Layer preference
+ * @phy_layer: Physical Layer representation
+ * @up: State of device
*/
-struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
- enum cfcnfg_phy_preference phy_pref);
+int cfcnfg_set_phy_state(struct cfcnfg *cnfg, struct cflayer *phy_layer,
+ bool up);
-/**
- * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex,
- * it matches caif physical id with the kernel interface id.
- * @cnfg: Configuration object
- * @ifi: ifindex obtained from socket.c bindtodevice.
- */
-int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi);
#endif /* CFCNFG_H_ */
diff --git a/include/net/caif/cfctrl.h b/include/net/caif/cfctrl.h
index e54f639..9e5425b 100644
--- a/include/net/caif/cfctrl.h
+++ b/include/net/caif/cfctrl.h
@@ -121,19 +121,10 @@
struct cflayer *user_layer);
int cfctrl_linkdown_req(struct cflayer *cfctrl, u8 linkid,
struct cflayer *client);
-void cfctrl_sleep_req(struct cflayer *cfctrl);
-void cfctrl_wake_req(struct cflayer *cfctrl);
-void cfctrl_getstartreason_req(struct cflayer *cfctrl);
+
struct cflayer *cfctrl_create(void);
-void cfctrl_set_dnlayer(struct cflayer *this, struct cflayer *dn);
-void cfctrl_set_uplayer(struct cflayer *this, struct cflayer *up);
struct cfctrl_rsp *cfctrl_get_respfuncs(struct cflayer *layer);
-bool cfctrl_req_eq(struct cfctrl_request_info *r1,
- struct cfctrl_request_info *r2);
-void cfctrl_insert_req(struct cfctrl *ctrl,
- struct cfctrl_request_info *req);
-struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
- struct cfctrl_request_info *req);
-void cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer);
+int cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer);
+void cfctrl_remove(struct cflayer *layr);
#endif /* CFCTRL_H_ */
diff --git a/include/net/caif/cffrml.h b/include/net/caif/cffrml.h
index 3f14d2e..afac1a4 100644
--- a/include/net/caif/cffrml.h
+++ b/include/net/caif/cffrml.h
@@ -7,10 +7,15 @@
#ifndef CFFRML_H_
#define CFFRML_H_
#include <net/caif/caif_layer.h>
+#include <linux/netdevice.h>
struct cffrml;
-struct cflayer *cffrml_create(u16 phyid, bool DoFCS);
+struct cflayer *cffrml_create(u16 phyid, bool use_fcs);
+void cffrml_free(struct cflayer *layr);
void cffrml_set_uplayer(struct cflayer *this, struct cflayer *up);
void cffrml_set_dnlayer(struct cflayer *this, struct cflayer *dn);
+void cffrml_put(struct cflayer *layr);
+void cffrml_hold(struct cflayer *layr);
+int cffrml_refcnt_read(struct cflayer *layr);
#endif /* CFFRML_H_ */
diff --git a/include/net/caif/cfmuxl.h b/include/net/caif/cfmuxl.h
index 4e1b4f3..5847a19 100644
--- a/include/net/caif/cfmuxl.h
+++ b/include/net/caif/cfmuxl.h
@@ -16,7 +16,5 @@
struct cflayer *cfmuxl_remove_dnlayer(struct cflayer *layr, u8 phyid);
int cfmuxl_set_dnlayer(struct cflayer *layr, struct cflayer *up, u8 phyid);
struct cflayer *cfmuxl_remove_uplayer(struct cflayer *layr, u8 linkid);
-bool cfmuxl_is_phy_inuse(struct cflayer *layr, u8 phyid);
-u8 cfmuxl_get_phyid(struct cflayer *layr, u8 channel_id);
#endif /* CFMUXL_H_ */
diff --git a/include/net/caif/cfpkt.h b/include/net/caif/cfpkt.h
index fbc681b..6bd200a 100644
--- a/include/net/caif/cfpkt.h
+++ b/include/net/caif/cfpkt.h
@@ -16,12 +16,6 @@
*/
struct cfpkt *cfpkt_create(u16 len);
-/* Create a CAIF packet.
- * data Data to copy.
- * len Length of packet to be created
- * @return New packet.
- */
-struct cfpkt *cfpkt_create_uplink(const unsigned char *data, unsigned int len);
/*
* Destroy a CAIF Packet.
* pkt Packet to be destoyed.
@@ -181,22 +175,6 @@
u16 (*iter_func)(u16 chks, void *buf, u16 len),
u16 data);
-/* Append by giving user access to packet buffer
- * cfpkt Packet to append to
- * buf Buffer inside pkt that user shall copy data into
- * buflen Length of buffer and number of bytes added to packet
- * @return 0 on error, 1 on success
- */
-int cfpkt_raw_append(struct cfpkt *cfpkt, void **buf, unsigned int buflen);
-
-/* Extract by giving user access to packet buffer
- * cfpkt Packet to extract from
- * buf Buffer inside pkt that user shall copy data from
- * buflen Length of buffer and number of bytes removed from packet
- * @return 0 on error, 1 on success
- */
-int cfpkt_raw_extract(struct cfpkt *cfpkt, void **buf, unsigned int buflen);
-
/* Map from a "native" packet (e.g. Linux Socket Buffer) to a CAIF packet.
* dir - Direction indicating whether this packet is to be sent or received.
* nativepkt - The native packet to be transformed to a CAIF packet
@@ -210,59 +188,6 @@
*/
void *cfpkt_tonative(struct cfpkt *pkt);
-/*
- * Insert a packet in the packet queue.
- * pktq Packet queue to insert into
- * pkt Packet to be inserted in queue
- * prio Priority of packet
- */
-void cfpkt_queue(struct cfpktq *pktq, struct cfpkt *pkt,
- unsigned short prio);
-
-/*
- * Remove a packet from the packet queue.
- * pktq Packet queue to fetch packets from.
- * @return Dequeued packet.
- */
-struct cfpkt *cfpkt_dequeue(struct cfpktq *pktq);
-
-/*
- * Peek into a packet from the packet queue.
- * pktq Packet queue to fetch packets from.
- * @return Peeked packet.
- */
-struct cfpkt *cfpkt_qpeek(struct cfpktq *pktq);
-
-/*
- * Initiates the packet queue.
- * @return Pointer to new packet queue.
- */
-struct cfpktq *cfpktq_create(void);
-
-/*
- * Get the number of packets in the queue.
- * pktq Packet queue to fetch count from.
- * @return Number of packets in queue.
- */
-int cfpkt_qcount(struct cfpktq *pktq);
-
-/*
- * Put content of packet into buffer for debuging purposes.
- * pkt Packet to copy data from
- * buf Buffer to copy data into
- * buflen Length of data to copy
- * @return Pointer to copied data
- */
-char *cfpkt_log_pkt(struct cfpkt *pkt, char *buf, int buflen);
-
-/*
- * Clones a packet and releases the original packet.
- * This is used for taking ownership of a packet e.g queueing.
- * pkt Packet to clone and release.
- * @return Cloned packet.
- */
-struct cfpkt *cfpkt_clone_release(struct cfpkt *pkt);
-
/*
* Returns packet information for a packet.
@@ -270,5 +195,4 @@
* @return Packet information
*/
struct caif_payload_info *cfpkt_info(struct cfpkt *pkt);
-/*! @} */
#endif /* CFPKT_H_ */
diff --git a/include/net/caif/cfsrvl.h b/include/net/caif/cfsrvl.h
index b1fa87e..0f59052 100644
--- a/include/net/caif/cfsrvl.h
+++ b/include/net/caif/cfsrvl.h
@@ -10,6 +10,7 @@
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/kref.h>
+#include <linux/rculist.h>
struct cfsrvl {
struct cflayer layer;
@@ -17,12 +18,13 @@
bool phy_flow_on;
bool modem_flow_on;
bool supports_flowctrl;
- void (*release)(struct kref *);
+ void (*release)(struct cflayer *layer);
struct dev_info dev_info;
- struct kref ref;
+ void (*hold)(struct cflayer *lyr);
+ void (*put)(struct cflayer *lyr);
+ struct rcu_head rcu;
};
-void cfsrvl_release(struct kref *kref);
struct cflayer *cfvei_create(u8 linkid, struct dev_info *dev_info);
struct cflayer *cfdgml_create(u8 linkid, struct dev_info *dev_info);
struct cflayer *cfutill_create(u8 linkid, struct dev_info *dev_info);
@@ -30,8 +32,12 @@
struct cflayer *cfrfml_create(u8 linkid, struct dev_info *dev_info,
int mtu_size);
struct cflayer *cfdbgl_create(u8 linkid, struct dev_info *dev_info);
+
+void cfsrvl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
+ int phyid);
+
bool cfsrvl_phyid_match(struct cflayer *layer, int phyid);
-void cfservl_destroy(struct cflayer *layer);
+
void cfsrvl_init(struct cfsrvl *service,
u8 channel_id,
struct dev_info *dev_info,
@@ -41,23 +47,19 @@
static inline void cfsrvl_get(struct cflayer *layr)
{
- struct cfsrvl *s;
- if (layr == NULL)
+ struct cfsrvl *s = container_of(layr, struct cfsrvl, layer);
+ if (layr == NULL || layr->up == NULL || s->hold == NULL)
return;
- s = container_of(layr, struct cfsrvl, layer);
- kref_get(&s->ref);
+
+ s->hold(layr->up);
}
static inline void cfsrvl_put(struct cflayer *layr)
{
- struct cfsrvl *s;
- if (layr == NULL)
+ struct cfsrvl *s = container_of(layr, struct cfsrvl, layer);
+ if (layr == NULL || layr->up == NULL || s->hold == NULL)
return;
- s = container_of(layr, struct cfsrvl, layer);
- WARN_ON(!s->release);
- if (s->release)
- kref_put(&s->ref, s->release);
+ s->put(layr->up);
}
-
#endif /* CFSRVL_H_ */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index b2b9d28..bfd6557 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -387,6 +387,7 @@
* @listen_interval: listen interval or -1 for no change
* @aid: AID or zero for no change
* @plink_action: plink action to take
+ * @plink_state: set the peer link state for a station
* @ht_capa: HT capabilities of station
*/
struct station_parameters {
@@ -397,6 +398,7 @@
u16 aid;
u8 supported_rates_len;
u8 plink_action;
+ u8 plink_state;
struct ieee80211_ht_cap *ht_capa;
};
@@ -422,6 +424,8 @@
* @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
* @STATION_INFO_SIGNAL_AVG: @signal_avg filled
* @STATION_INFO_RX_BITRATE: @rxrate fields are filled
+ * @STATION_INFO_BSS_PARAM: @bss_param filled
+ * @STATION_INFO_CONNECTED_TIME: @connected_time filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
@@ -439,6 +443,8 @@
STATION_INFO_RX_DROP_MISC = 1<<12,
STATION_INFO_SIGNAL_AVG = 1<<13,
STATION_INFO_RX_BITRATE = 1<<14,
+ STATION_INFO_BSS_PARAM = 1<<15,
+ STATION_INFO_CONNECTED_TIME = 1<<16
};
/**
@@ -473,11 +479,43 @@
};
/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
+ * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
+ * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
+ */
+enum bss_param_flags {
+ BSS_PARAM_FLAGS_CTS_PROT = 1<<0,
+ BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1,
+ BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2,
+};
+
+/**
+ * struct sta_bss_parameters - BSS parameters for the attached station
+ *
+ * Information about the currently associated BSS
+ *
+ * @flags: bitflag of flags from &enum bss_param_flags
+ * @dtim_period: DTIM period for the BSS
+ * @beacon_interval: beacon interval
+ */
+struct sta_bss_parameters {
+ u8 flags;
+ u8 dtim_period;
+ u16 beacon_interval;
+};
+
+/**
* struct station_info - station information
*
* Station information filled by driver for get_station() and dump_station.
*
* @filled: bitflag of flags from &enum station_info_flags
+ * @connected_time: time(in secs) since a station is last connected
* @inactive_time: time since last station activity (tx/rx) in milliseconds
* @rx_bytes: bytes received from this station
* @tx_bytes: bytes transmitted to this station
@@ -500,6 +538,7 @@
*/
struct station_info {
u32 filled;
+ u32 connected_time;
u32 inactive_time;
u32 rx_bytes;
u32 tx_bytes;
@@ -515,6 +554,7 @@
u32 tx_retries;
u32 tx_failed;
u32 rx_dropped_misc;
+ struct sta_bss_parameters bss_param;
int generation;
};
@@ -655,8 +695,10 @@
* @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
* @path_sel_proto: which path selection protocol to use
* @path_metric: which metric to use
- * @vendor_ie: vendor information elements (optional)
- * @vendor_ie_len: length of vendor information elements
+ * @ie: vendor information elements (optional)
+ * @ie_len: length of vendor information elements
+ * @is_authenticated: this mesh requires authentication
+ * @is_secure: this mesh uses security
*
* These parameters are fixed when the mesh is created.
*/
@@ -665,8 +707,10 @@
u8 mesh_id_len;
u8 path_sel_proto;
u8 path_metric;
- const u8 *vendor_ie;
- u8 vendor_ie_len;
+ const u8 *ie;
+ u8 ie_len;
+ bool is_authenticated;
+ bool is_secure;
};
/**
@@ -753,6 +797,35 @@
};
/**
+ * struct cfg80211_sched_scan_request - scheduled scan request description
+ *
+ * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
+ * @n_ssids: number of SSIDs
+ * @n_channels: total number of channels to scan
+ * @interval: interval between each scheduled scan cycle
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @channels: channels to scan
+ */
+struct cfg80211_sched_scan_request {
+ struct cfg80211_ssid *ssids;
+ int n_ssids;
+ u32 n_channels;
+ u32 interval;
+ const u8 *ie;
+ size_t ie_len;
+
+ /* internal */
+ struct wiphy *wiphy;
+ struct net_device *dev;
+
+ /* keep last */
+ struct ieee80211_channel *channels[0];
+};
+
+/**
* enum cfg80211_signal_type - signal type
*
* @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
@@ -1048,6 +1121,38 @@
};
/**
+ * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
+ * @mask: bitmask where to match pattern and where to ignore bytes,
+ * one bit per byte, in same format as nl80211
+ * @pattern: bytes to match where bitmask is 1
+ * @pattern_len: length of pattern (in bytes)
+ *
+ * Internal note: @mask and @pattern are allocated in one chunk of
+ * memory, free @mask only!
+ */
+struct cfg80211_wowlan_trig_pkt_pattern {
+ u8 *mask, *pattern;
+ int pattern_len;
+};
+
+/**
+ * struct cfg80211_wowlan - Wake on Wireless-LAN support info
+ *
+ * This structure defines the enabled WoWLAN triggers for the device.
+ * @any: wake up on any activity -- special trigger if device continues
+ * operating as normal during suspend
+ * @disconnect: wake up if getting disconnected
+ * @magic_pkt: wake up on receiving magic packet
+ * @patterns: wake up on receiving packet matching a pattern
+ * @n_patterns: number of patterns
+ */
+struct cfg80211_wowlan {
+ bool any, disconnect, magic_pkt;
+ struct cfg80211_wowlan_trig_pkt_pattern *patterns;
+ int n_patterns;
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -1060,7 +1165,9 @@
* wireless extensions but this is subject to reevaluation as soon as this
* code is used more widely and we have a first user without wext.
*
- * @suspend: wiphy device needs to be suspended
+ * @suspend: wiphy device needs to be suspended. The variable @wow will
+ * be %NULL or contain the enabled Wake-on-Wireless triggers that are
+ * configured for the device.
* @resume: wiphy device needs to be resumed
*
* @add_virtual_intf: create a new virtual interface with the given name,
@@ -1187,6 +1294,10 @@
* @set_power_mgmt: Configure WLAN power management. A timeout value of -1
* allows the driver to adjust the dynamic ps timeout value.
* @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ * @sched_scan_start: Tell the driver to start a scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
+ * scan. The driver_initiated flag specifies whether the driver
+ * itself has informed that the scan has stopped.
*
* @mgmt_frame_register: Notify driver that a management frame type was
* registered. Note that this callback may not sleep, and cannot run
@@ -1204,7 +1315,7 @@
* @get_ringparam: Get tx and rx ring current and maximum sizes.
*/
struct cfg80211_ops {
- int (*suspend)(struct wiphy *wiphy);
+ int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
int (*resume)(struct wiphy *wiphy);
struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
@@ -1373,6 +1484,11 @@
int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
void (*get_ringparam)(struct wiphy *wiphy,
u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+
+ int (*sched_scan_start)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_sched_scan_request *request);
+ int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
};
/*
@@ -1404,6 +1520,10 @@
* hints read the documenation for regulatory_hint_found_beacon()
* @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
* wiphy at all
+ * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface
+ * combinations for this device. This flag is used for backward
+ * compatibility only until all drivers advertise combinations and
+ * they will always be enforced.
* @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
* by default -- this flag will be set depending on the kernel's default
* on wiphy_new(), but can be changed by the driver if it has a good
@@ -1415,8 +1535,9 @@
* control port protocol ethertype. The device also honours the
* control_port_no_encrypt flag.
* @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
- * @WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS: The device supports separate
- * unicast and multicast TX keys.
+ * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
+ * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
+ * @WIPHY_FLAG_SCHED_SCAN: The device supports scheduled scans.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1428,7 +1549,83 @@
WIPHY_FLAG_4ADDR_STATION = BIT(6),
WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
WIPHY_FLAG_IBSS_RSN = BIT(8),
- WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS= BIT(9),
+ WIPHY_FLAG_MESH_AUTH = BIT(10),
+ WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11),
+ WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12),
+};
+
+/**
+ * struct ieee80211_iface_limit - limit on certain interface types
+ * @max: maximum number of interfaces of these types
+ * @types: interface types (bits)
+ */
+struct ieee80211_iface_limit {
+ u16 max;
+ u16 types;
+};
+
+/**
+ * struct ieee80211_iface_combination - possible interface combination
+ * @limits: limits for the given interface types
+ * @n_limits: number of limitations
+ * @num_different_channels: can use up to this many different channels
+ * @max_interfaces: maximum number of interfaces in total allowed in this
+ * group
+ * @beacon_int_infra_match: In this combination, the beacon intervals
+ * between infrastructure and AP types must match. This is required
+ * only in special cases.
+ *
+ * These examples can be expressed as follows:
+ *
+ * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ *
+ * struct ieee80211_iface_limit limits1[] = {
+ * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, },
+ * };
+ * struct ieee80211_iface_combination combination1 = {
+ * .limits = limits1,
+ * .n_limits = ARRAY_SIZE(limits1),
+ * .max_interfaces = 2,
+ * .beacon_int_infra_match = true,
+ * };
+ *
+ *
+ * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ *
+ * struct ieee80211_iface_limit limits2[] = {
+ * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
+ * BIT(NL80211_IFTYPE_P2P_GO), },
+ * };
+ * struct ieee80211_iface_combination combination2 = {
+ * .limits = limits2,
+ * .n_limits = ARRAY_SIZE(limits2),
+ * .max_interfaces = 8,
+ * .num_different_channels = 1,
+ * };
+ *
+ *
+ * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * This allows for an infrastructure connection and three P2P connections.
+ *
+ * struct ieee80211_iface_limit limits3[] = {
+ * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) |
+ * BIT(NL80211_IFTYPE_P2P_CLIENT), },
+ * };
+ * struct ieee80211_iface_combination combination3 = {
+ * .limits = limits3,
+ * .n_limits = ARRAY_SIZE(limits3),
+ * .max_interfaces = 4,
+ * .num_different_channels = 2,
+ * };
+ */
+struct ieee80211_iface_combination {
+ const struct ieee80211_iface_limit *limits;
+ u32 num_different_channels;
+ u16 max_interfaces;
+ u8 n_limits;
+ bool beacon_int_infra_match;
};
struct mac_address {
@@ -1440,6 +1637,38 @@
};
/**
+ * enum wiphy_wowlan_support_flags - WoWLAN support flags
+ * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any"
+ * trigger that keeps the device operating as-is and
+ * wakes up the host on any activity, for example a
+ * received packet that passed filtering; note that the
+ * packet should be preserved in that case
+ * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
+ * (see nl80211.h)
+ * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ */
+enum wiphy_wowlan_support_flags {
+ WIPHY_WOWLAN_ANY = BIT(0),
+ WIPHY_WOWLAN_MAGIC_PKT = BIT(1),
+ WIPHY_WOWLAN_DISCONNECT = BIT(2),
+};
+
+/**
+ * struct wiphy_wowlan_support - WoWLAN support data
+ * @flags: see &enum wiphy_wowlan_support_flags
+ * @n_patterns: number of supported wakeup patterns
+ * (see nl80211.h for the pattern definition)
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ */
+struct wiphy_wowlan_support {
+ u32 flags;
+ int n_patterns;
+ int pattern_max_len;
+ int pattern_min_len;
+};
+
+/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback,
* note that if your driver uses wiphy_apply_custom_regulatory()
@@ -1476,6 +1705,11 @@
* @priv: driver private data (sized according to wiphy_new() parameter)
* @interface_modes: bitmask of interfaces types valid for this wiphy,
* must be set by driver
+ * @iface_combinations: Valid interface combinations array, should not
+ * list single interface types.
+ * @n_iface_combinations: number of entries in @iface_combinations array.
+ * @software_iftypes: bitmask of software interface types, these are not
+ * subject to any restrictions since they are purely managed in SW.
* @flags: wiphy flags, see &enum wiphy_flags
* @bss_priv_size: each BSS struct has private data allocated with it,
* this variable determines its size
@@ -1506,6 +1740,8 @@
*
* @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
* may request, if implemented.
+ *
+ * @wowlan: WoWLAN support information
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1518,6 +1754,10 @@
const struct ieee80211_txrx_stypes *mgmt_stypes;
+ const struct ieee80211_iface_combination *iface_combinations;
+ int n_iface_combinations;
+ u16 software_iftypes;
+
u16 n_addresses;
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
@@ -1543,6 +1783,8 @@
char fw_version[ETHTOOL_BUSINFO_LEN];
u32 hw_version;
+ struct wiphy_wowlan_support wowlan;
+
u16 max_remain_on_channel_duration;
u8 max_num_pmkids;
@@ -1726,6 +1968,8 @@
* @mgmt_registrations_lock: lock for the list
* @mtx: mutex used to lock data in this struct
* @cleanup_work: work struct used for cleanup that can't be done directly
+ * @beacon_interval: beacon interval used on this device for transmitting
+ * beacons, 0 when not valid
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -1766,6 +2010,8 @@
bool ps;
int ps_timeout;
+ int beacon_interval;
+
#ifdef CONFIG_CFG80211_WEXT
/* wext data */
struct {
@@ -1991,10 +2237,12 @@
* @addr: The device MAC address.
* @iftype: The device interface type.
* @extra_headroom: The hardware extra headroom for SKBs in the @list.
+ * @has_80211_header: Set it true if SKB is with IEEE 802.11 header.
*/
void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
const u8 *addr, enum nl80211_iftype iftype,
- const unsigned int extra_headroom);
+ const unsigned int extra_headroom,
+ bool has_80211_header);
/**
* cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
@@ -2214,6 +2462,24 @@
void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
/**
+ * cfg80211_sched_scan_results - notify that new scan results are available
+ *
+ * @wiphy: the wiphy which got scheduled scan results
+ */
+void cfg80211_sched_scan_results(struct wiphy *wiphy);
+
+/**
+ * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
+ *
+ * @wiphy: the wiphy on which the scheduled scan stopped
+ *
+ * The driver can call this function to inform cfg80211 that the
+ * scheduled scan had to be stopped, for whatever reason. The driver
+ * is then called back via the sched_scan_stop operation when done.
+ */
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+
+/**
* cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
*
* @wiphy: the wiphy reporting the BSS
@@ -2450,6 +2716,22 @@
void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
/**
+ * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
+ *
+ * @dev: network device
+ * @macaddr: the MAC address of the new candidate
+ * @ie: information elements advertised by the peer candidate
+ * @ie_len: lenght of the information elements buffer
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the mesh peer candidate has been
+ * detected, most likely via a beacon or, less likely, via a probe response.
+ * cfg80211 then sends a notification to userspace.
+ */
+void cfg80211_notify_new_peer_candidate(struct net_device *dev,
+ const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp);
+
+/**
* DOC: RFkill integration
*
* RFkill integration in cfg80211 is almost invisible to drivers,
@@ -2667,6 +2949,15 @@
struct station_info *sinfo, gfp_t gfp);
/**
+ * cfg80211_del_sta - notify userspace about deletion of a station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @gfp: allocation flags
+ */
+void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
+
+/**
* cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
diff --git a/include/net/compat.h b/include/net/compat.h
index 28d5428..9ee75ed 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -43,6 +43,8 @@
extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr *, int);
extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_sendmmsg(int, struct compat_mmsghdr __user *,
+ unsigned, unsigned);
extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
extern asmlinkage long compat_sys_recvmmsg(int, struct compat_mmsghdr __user *,
unsigned, unsigned,
diff --git a/include/net/dst.h b/include/net/dst.h
index 75b95df..07a0402 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -16,13 +16,6 @@
#include <net/neighbour.h>
#include <asm/processor.h>
-/*
- * 0 - no debugging messages
- * 1 - rare events and bugs (default)
- * 2 - trace mode.
- */
-#define RT_CACHE_DEBUG 0
-
#define DST_GC_MIN (HZ/10)
#define DST_GC_INC (HZ/2)
#define DST_GC_MAX (120*HZ)
@@ -92,8 +85,6 @@
};
};
-#ifdef __KERNEL__
-
extern u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old);
extern const u32 dst_default_metrics[RTAX_MAX];
@@ -352,7 +343,8 @@
}
extern int dst_discard(struct sk_buff *skb);
-extern void *dst_alloc(struct dst_ops * ops, int initial_ref);
+extern void *dst_alloc(struct dst_ops * ops, struct net_device *dev,
+ int initial_ref, int initial_obsolete, int flags);
extern void __dst_free(struct dst_entry * dst);
extern struct dst_entry *dst_destroy(struct dst_entry * dst);
@@ -438,6 +430,5 @@
const struct flowi *fl, struct sock *sk,
int flags);
#endif
-#endif
#endif /* _NET_DST_H */
diff --git a/include/net/flow.h b/include/net/flow.h
index 7fe5a0f..c6d5fe5 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -26,8 +26,8 @@
union flowi_uli {
struct {
- __be16 sport;
__be16 dport;
+ __be16 sport;
} ports;
struct {
@@ -36,8 +36,8 @@
} icmpt;
struct {
- __le16 sport;
__le16 dport;
+ __le16 sport;
} dnports;
__be32 spi;
@@ -70,6 +70,27 @@
#define fl4_gre_key uli.gre_key
};
+static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
+ __u32 mark, __u8 tos, __u8 scope,
+ __u8 proto, __u8 flags,
+ __be32 daddr, __be32 saddr,
+ __be16 dport, __be32 sport)
+{
+ fl4->flowi4_oif = oif;
+ fl4->flowi4_iif = 0;
+ fl4->flowi4_mark = mark;
+ fl4->flowi4_tos = tos;
+ fl4->flowi4_scope = scope;
+ fl4->flowi4_proto = proto;
+ fl4->flowi4_flags = flags;
+ fl4->flowi4_secid = 0;
+ fl4->daddr = daddr;
+ fl4->saddr = saddr;
+ fl4->fl4_dport = dport;
+ fl4->fl4_sport = sport;
+}
+
+
struct flowi6 {
struct flowi_common __fl_common;
#define flowi6_oif __fl_common.flowic_oif
diff --git a/include/net/garp.h b/include/net/garp.h
index f4c2959..834d8ad 100644
--- a/include/net/garp.h
+++ b/include/net/garp.h
@@ -104,10 +104,12 @@
struct sk_buff_head queue;
struct sk_buff *pdu;
struct rb_root gid;
+ struct rcu_head rcu;
};
struct garp_port {
struct garp_applicant __rcu *applicants[GARP_APPLICATION_MAX + 1];
+ struct rcu_head rcu;
};
extern int garp_register_application(struct garp_application *app);
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index fccc218..11cf373 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -30,8 +30,6 @@
#define IF_PREFIX_ONLINK 0x01
#define IF_PREFIX_AUTOCONF 0x02
-#ifdef __KERNEL__
-
enum {
INET6_IFADDR_STATE_DAD,
INET6_IFADDR_STATE_POSTDAD,
@@ -156,8 +154,8 @@
struct ipv6_devstat {
struct proc_dir_entry *proc_dir_entry;
DEFINE_SNMP_STAT(struct ipstats_mib, ipv6);
- DEFINE_SNMP_STAT(struct icmpv6_mib, icmpv6);
- DEFINE_SNMP_STAT(struct icmpv6msg_mib, icmpv6msg);
+ DEFINE_SNMP_STAT_ATOMIC(struct icmpv6_mib_device, icmpv6dev);
+ DEFINE_SNMP_STAT_ATOMIC(struct icmpv6msg_mib_device, icmpv6msgdev);
};
struct inet6_dev {
@@ -196,7 +194,7 @@
struct rcu_head rcu;
};
-static inline void ipv6_eth_mc_map(struct in6_addr *addr, char *buf)
+static inline void ipv6_eth_mc_map(const struct in6_addr *addr, char *buf)
{
/*
* +-------+-------+-------+-------+-------+-------+
@@ -210,7 +208,7 @@
memcpy(buf + 2, &addr->s6_addr32[3], sizeof(__u32));
}
-static inline void ipv6_tr_mc_map(struct in6_addr *addr, char *buf)
+static inline void ipv6_tr_mc_map(const struct in6_addr *addr, char *buf)
{
/* All nodes FF01::1, FF02::1, FF02::1:FFxx:xxxx */
@@ -303,4 +301,3 @@
}
#endif
-#endif
diff --git a/include/net/inet6_connection_sock.h b/include/net/inet6_connection_sock.h
index ff01350..3207e58 100644
--- a/include/net/inet6_connection_sock.h
+++ b/include/net/inet6_connection_sock.h
@@ -41,5 +41,5 @@
extern void inet6_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr);
-extern int inet6_csk_xmit(struct sk_buff *skb);
+extern int inet6_csk_xmit(struct sk_buff *skb, struct flowi *fl);
#endif /* _INET6_CONNECTION_SOCK_H */
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index 6ac4e3b..e6db62e 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -36,7 +36,7 @@
* (i.e. things that depend on the address family)
*/
struct inet_connection_sock_af_ops {
- int (*queue_xmit)(struct sk_buff *skb);
+ int (*queue_xmit)(struct sk_buff *skb, struct flowi *fl);
void (*send_check)(struct sock *sk, struct sk_buff *skb);
int (*rebuild_header)(struct sock *sk);
int (*conn_request)(struct sock *sk, struct sk_buff *skb);
@@ -249,7 +249,11 @@
extern int inet_csk_get_port(struct sock *sk, unsigned short snum);
extern struct dst_entry* inet_csk_route_req(struct sock *sk,
+ struct flowi4 *fl4,
const struct request_sock *req);
+extern struct dst_entry* inet_csk_route_child_sock(struct sock *sk,
+ struct sock *newsk,
+ const struct request_sock *req);
static inline void inet_csk_reqsk_queue_add(struct sock *sk,
struct request_sock *req,
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index 88bdd01..2fa8d13 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -38,9 +38,19 @@
return outer;
}
-#define INET_ECN_xmit(sk) do { inet_sk(sk)->tos |= INET_ECN_ECT_0; } while (0)
-#define INET_ECN_dontxmit(sk) \
- do { inet_sk(sk)->tos &= ~INET_ECN_MASK; } while (0)
+static inline void INET_ECN_xmit(struct sock *sk)
+{
+ inet_sk(sk)->tos |= INET_ECN_ECT_0;
+ if (inet6_sk(sk) != NULL)
+ inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
+static inline void INET_ECN_dontxmit(struct sock *sk)
+{
+ inet_sk(sk)->tos &= ~INET_ECN_MASK;
+ if (inet6_sk(sk) != NULL)
+ inet6_sk(sk)->tclass &= ~INET_ECN_MASK;
+}
#define IP6_ECN_flow_init(label) do { \
(label) &= ~htonl(INET_ECN_MASK << 20); \
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 7a37369..caaff5f 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -57,7 +57,15 @@
unsigned char __data[0];
};
-#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+struct ip_options_rcu {
+ struct rcu_head rcu;
+ struct ip_options opt;
+};
+
+struct ip_options_data {
+ struct ip_options_rcu opt;
+ char data[40];
+};
struct inet_request_sock {
struct request_sock req;
@@ -78,7 +86,7 @@
acked : 1,
no_srccheck: 1;
kmemcheck_bitfield_end(flags);
- struct ip_options *opt;
+ struct ip_options_rcu *opt;
};
static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk)
@@ -88,17 +96,21 @@
struct inet_cork {
unsigned int flags;
- unsigned int fragsize;
+ __be32 addr;
struct ip_options *opt;
+ unsigned int fragsize;
struct dst_entry *dst;
int length; /* Total length of all frames */
- __be32 addr;
- struct flowi fl;
struct page *page;
u32 off;
u8 tx_flags;
};
+struct inet_cork_full {
+ struct inet_cork base;
+ struct flowi fl;
+};
+
struct ip_mc_socklist;
struct ipv6_pinfo;
struct rtable;
@@ -140,7 +152,7 @@
__be16 inet_sport;
__u16 inet_id;
- struct ip_options *opt;
+ struct ip_options_rcu __rcu *inet_opt;
__u8 tos;
__u8 min_ttl;
__u8 mc_ttl;
@@ -156,7 +168,7 @@
int mc_index;
__be32 mc_addr;
struct ip_mc_socklist __rcu *mc_list;
- struct inet_cork cork;
+ struct inet_cork_full cork;
};
#define IPCORK_OPT 1 /* ip-options has been held in ipcork.opt */
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index e6dd8da6..8a159cc 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -80,7 +80,7 @@
return inet_getpeer(&daddr, create);
}
-static inline struct inet_peer *inet_getpeer_v6(struct in6_addr *v6daddr, int create)
+static inline struct inet_peer *inet_getpeer_v6(const struct in6_addr *v6daddr, int create)
{
struct inetpeer_addr daddr;
diff --git a/include/net/ip.h b/include/net/ip.h
index 7c41658..66dd491 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -52,7 +52,7 @@
struct ipcm_cookie {
__be32 addr;
int oif;
- struct ip_options *opt;
+ struct ip_options_rcu *opt;
__u8 tx_flags;
};
@@ -92,7 +92,7 @@
extern int ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
__be32 saddr, __be32 daddr,
- struct ip_options *opt);
+ struct ip_options_rcu *opt);
extern int ip_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);
extern int ip_local_deliver(struct sk_buff *skb);
@@ -104,9 +104,9 @@
extern void ip_send_check(struct iphdr *ip);
extern int __ip_local_out(struct sk_buff *skb);
extern int ip_local_out(struct sk_buff *skb);
-extern int ip_queue_xmit(struct sk_buff *skb);
+extern int ip_queue_xmit(struct sk_buff *skb, struct flowi *fl);
extern void ip_init(void);
-extern int ip_append_data(struct sock *sk,
+extern int ip_append_data(struct sock *sk, struct flowi4 *fl4,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int len, int protolen,
@@ -114,15 +114,17 @@
struct rtable **rt,
unsigned int flags);
extern int ip_generic_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb);
-extern ssize_t ip_append_page(struct sock *sk, struct page *page,
+extern ssize_t ip_append_page(struct sock *sk, struct flowi4 *fl4, struct page *page,
int offset, size_t size, int flags);
extern struct sk_buff *__ip_make_skb(struct sock *sk,
+ struct flowi4 *fl4,
struct sk_buff_head *queue,
struct inet_cork *cork);
extern int ip_send_skb(struct sk_buff *skb);
-extern int ip_push_pending_frames(struct sock *sk);
+extern int ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4);
extern void ip_flush_pending_frames(struct sock *sk);
extern struct sk_buff *ip_make_skb(struct sock *sk,
+ struct flowi4 *fl4,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int length, int transhdrlen,
@@ -130,9 +132,9 @@
struct rtable **rtp,
unsigned int flags);
-static inline struct sk_buff *ip_finish_skb(struct sock *sk)
+static inline struct sk_buff *ip_finish_skb(struct sock *sk, struct flowi4 *fl4)
{
- return __ip_make_skb(sk, &sk->sk_write_queue, &inet_sk(sk)->cork);
+ return __ip_make_skb(sk, fl4, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
}
/* datagram.c */
@@ -172,8 +174,8 @@
return (arg->flags & IP_REPLY_ARG_NOSRCCHECK) ? FLOWI_FLAG_ANYSRC : 0;
}
-void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
- unsigned int len);
+void ip_send_reply(struct sock *sk, struct sk_buff *skb, __be32 daddr,
+ struct ip_reply_arg *arg, unsigned int len);
struct ipv4_config {
int log_martians;
@@ -416,14 +418,15 @@
* Functions provided by ip_options.c
*/
-extern void ip_options_build(struct sk_buff *skb, struct ip_options *opt, __be32 daddr, struct rtable *rt, int is_frag);
+extern void ip_options_build(struct sk_buff *skb, struct ip_options *opt,
+ __be32 daddr, struct rtable *rt, int is_frag);
extern int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb);
extern void ip_options_fragment(struct sk_buff *skb);
extern int ip_options_compile(struct net *net,
struct ip_options *opt, struct sk_buff *skb);
-extern int ip_options_get(struct net *net, struct ip_options **optp,
+extern int ip_options_get(struct net *net, struct ip_options_rcu **optp,
unsigned char *data, int optlen);
-extern int ip_options_get_from_user(struct net *net, struct ip_options **optp,
+extern int ip_options_get_from_user(struct net *net, struct ip_options_rcu **optp,
unsigned char __user *data, int optlen);
extern void ip_options_undo(struct ip_options * opt);
extern void ip_forward_options(struct sk_buff *skb);
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index bc3cde0..477ef75 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -13,8 +13,6 @@
#ifndef _IP6_FIB_H
#define _IP6_FIB_H
-#ifdef __KERNEL__
-
#include <linux/ipv6_route.h>
#include <linux/rtnetlink.h>
#include <linux/spinlock.h>
@@ -42,6 +40,7 @@
struct in6_addr fc_dst;
struct in6_addr fc_src;
+ struct in6_addr fc_prefsrc;
struct in6_addr fc_gateway;
unsigned long fc_expires;
@@ -107,6 +106,7 @@
struct rt6key rt6i_dst ____cacheline_aligned_in_smp;
u32 rt6i_flags;
struct rt6key rt6i_src;
+ struct rt6key rt6i_prefsrc;
u32 rt6i_metric;
u32 rt6i_peer_genid;
@@ -196,12 +196,12 @@
pol_lookup_t lookup);
extern struct fib6_node *fib6_lookup(struct fib6_node *root,
- struct in6_addr *daddr,
- struct in6_addr *saddr);
+ const struct in6_addr *daddr,
+ const struct in6_addr *saddr);
struct fib6_node *fib6_locate(struct fib6_node *root,
- struct in6_addr *daddr, int dst_len,
- struct in6_addr *saddr, int src_len);
+ const struct in6_addr *daddr, int dst_len,
+ const struct in6_addr *saddr, int src_len);
extern void fib6_clean_all(struct net *net,
int (*func)(struct rt6_info *, void *arg),
@@ -238,4 +238,3 @@
}
#endif
#endif
-#endif
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index c850e5f..5e91b72 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -21,8 +21,6 @@
__u8 prefix[0]; /* 0,8 or 16 */
};
-#ifdef __KERNEL__
-
#include <net/flow.h>
#include <net/ip6_fib.h>
#include <net/sock.h>
@@ -84,6 +82,12 @@
extern int ip6_ins_rt(struct rt6_info *);
extern int ip6_del_rt(struct rt6_info *);
+extern int ip6_route_get_saddr(struct net *net,
+ struct rt6_info *rt,
+ const struct in6_addr *daddr,
+ unsigned int prefs,
+ struct in6_addr *saddr);
+
extern struct rt6_info *rt6_lookup(struct net *net,
const struct in6_addr *daddr,
const struct in6_addr *saddr,
@@ -106,9 +110,9 @@
* support functions for ND
*
*/
-extern struct rt6_info * rt6_get_dflt_router(struct in6_addr *addr,
+extern struct rt6_info * rt6_get_dflt_router(const struct in6_addr *addr,
struct net_device *dev);
-extern struct rt6_info * rt6_add_dflt_router(struct in6_addr *gwaddr,
+extern struct rt6_info * rt6_add_dflt_router(const struct in6_addr *gwaddr,
struct net_device *dev,
unsigned int pref);
@@ -116,17 +120,17 @@
extern int rt6_route_rcv(struct net_device *dev,
u8 *opt, int len,
- struct in6_addr *gwaddr);
+ const struct in6_addr *gwaddr);
-extern void rt6_redirect(struct in6_addr *dest,
- struct in6_addr *src,
- struct in6_addr *saddr,
+extern void rt6_redirect(const struct in6_addr *dest,
+ const struct in6_addr *src,
+ const struct in6_addr *saddr,
struct neighbour *neigh,
u8 *lladdr,
int on_link);
-extern void rt6_pmtu_discovery(struct in6_addr *daddr,
- struct in6_addr *saddr,
+extern void rt6_pmtu_discovery(const struct in6_addr *daddr,
+ const struct in6_addr *saddr,
struct net_device *dev,
u32 pmtu);
@@ -141,6 +145,7 @@
extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
extern void rt6_ifdown(struct net *net, struct net_device *dev);
extern void rt6_mtu_change(struct net_device *dev, unsigned mtu);
+extern void rt6_remove_prefsrc(struct inet6_ifaddr *ifp);
/*
@@ -186,4 +191,3 @@
}
#endif
-#endif
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index e5d66ec..10422ef 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -160,7 +160,8 @@
struct hlist_node tb_hlist;
u32 tb_id;
int tb_default;
- unsigned char tb_data[0];
+ int tb_num_default;
+ unsigned long tb_data[0];
};
extern int fib_table_lookup(struct fib_table *tb, const struct flowi4 *flp,
@@ -227,9 +228,9 @@
/* Exported by fib_frontend.c */
extern const struct nla_policy rtm_ipv4_policy[];
extern void ip_fib_init(void);
-extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
- struct net_device *dev, __be32 *spec_dst,
- u32 *itag, u32 mark);
+extern int fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst,
+ u8 tos, int oif, struct net_device *dev,
+ __be32 *spec_dst, u32 *itag);
extern void fib_select_default(struct fib_result *res);
/* Exported by fib_semantics.c */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index d516f00..4fff432 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -8,9 +8,6 @@
#include <linux/ip_vs.h> /* definitions shared with userland */
-/* old ipvsadm versions still include this file directly */
-#ifdef __KERNEL__
-
#include <asm/types.h> /* for __uXX types */
#include <linux/sysctl.h> /* for ctl_path */
@@ -668,9 +665,7 @@
struct dst_entry *dst_cache; /* destination cache entry */
u32 dst_rtos; /* RT_TOS(tos) for dst */
u32 dst_cookie;
-#ifdef CONFIG_IP_VS_IPV6
- struct in6_addr dst_saddr;
-#endif
+ union nf_inet_addr dst_saddr;
/* for virtual service */
struct ip_vs_service *svc; /* service it belongs to */
@@ -791,6 +786,7 @@
/* IPVS in network namespace */
struct netns_ipvs {
int gen; /* Generation */
+ int enable; /* enable like nf_hooks do */
/*
* Hash table: for real service lookups
*/
@@ -1089,6 +1085,22 @@
atomic_inc(&ctl_cp->n_control);
}
+/*
+ * IPVS netns init & cleanup functions
+ */
+extern int __ip_vs_estimator_init(struct net *net);
+extern int __ip_vs_control_init(struct net *net);
+extern int __ip_vs_protocol_init(struct net *net);
+extern int __ip_vs_app_init(struct net *net);
+extern int __ip_vs_conn_init(struct net *net);
+extern int __ip_vs_sync_init(struct net *net);
+extern void __ip_vs_conn_cleanup(struct net *net);
+extern void __ip_vs_app_cleanup(struct net *net);
+extern void __ip_vs_protocol_cleanup(struct net *net);
+extern void __ip_vs_control_cleanup(struct net *net);
+extern void __ip_vs_estimator_cleanup(struct net *net);
+extern void __ip_vs_sync_cleanup(struct net *net);
+extern void __ip_vs_service_cleanup(struct net *net);
/*
* IPVS application functions
@@ -1239,7 +1251,8 @@
extern int ip_vs_dr_xmit
(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
extern int ip_vs_icmp_xmit
-(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, int offset);
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp,
+ int offset, unsigned int hooknum);
extern void ip_vs_dst_reset(struct ip_vs_dest *dest);
#ifdef CONFIG_IP_VS_IPV6
@@ -1253,7 +1266,7 @@
(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
extern int ip_vs_icmp_xmit_v6
(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp,
- int offset);
+ int offset, unsigned int hooknum);
#endif
#ifdef CONFIG_SYSCTL
@@ -1415,6 +1428,4 @@
atomic_read(&dest->inactconns);
}
-#endif /* __KERNEL__ */
-
#endif /* _NET_IP_VS_H */
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 34200f9..c033ed0 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -77,11 +77,9 @@
/*
* Addr scopes
*/
-#ifdef __KERNEL__
#define IPV6_ADDR_MC_SCOPE(a) \
((a)->s6_addr[1] & 0x0f) /* nonstandard */
#define __IPV6_ADDR_SCOPE_INVALID -1
-#endif
#define IPV6_ADDR_SCOPE_NODELOCAL 0x01
#define IPV6_ADDR_SCOPE_LINKLOCAL 0x02
#define IPV6_ADDR_SCOPE_SITELOCAL 0x05
@@ -91,14 +89,12 @@
/*
* Addr flags
*/
-#ifdef __KERNEL__
#define IPV6_ADDR_MC_FLAG_TRANSIENT(a) \
((a)->s6_addr[1] & 0x10)
#define IPV6_ADDR_MC_FLAG_PREFIX(a) \
((a)->s6_addr[1] & 0x20)
#define IPV6_ADDR_MC_FLAG_RENDEZVOUS(a) \
((a)->s6_addr[1] & 0x40)
-#endif
/*
* fragmentation header
@@ -113,8 +109,6 @@
#define IP6_MF 0x0001
-#ifdef __KERNEL__
-
#include <net/sock.h>
/* sysctls */
@@ -129,6 +123,15 @@
SNMP_INC_STATS##modifier((net)->mib.statname##_statistics, (field));\
})
+/* per device counters are atomic_long_t */
+#define _DEVINCATOMIC(net, statname, modifier, idev, field) \
+({ \
+ struct inet6_dev *_idev = (idev); \
+ if (likely(_idev != NULL)) \
+ SNMP_INC_STATS_ATOMIC_LONG((_idev)->stats.statname##dev, (field)); \
+ SNMP_INC_STATS##modifier((net)->mib.statname##_statistics, (field));\
+})
+
#define _DEVADD(net, statname, modifier, idev, field, val) \
({ \
struct inet6_dev *_idev = (idev); \
@@ -160,16 +163,16 @@
#define IP6_UPD_PO_STATS_BH(net, idev,field,val) \
_DEVUPD(net, ipv6, 64_BH, idev, field, val)
#define ICMP6_INC_STATS(net, idev, field) \
- _DEVINC(net, icmpv6, , idev, field)
+ _DEVINCATOMIC(net, icmpv6, , idev, field)
#define ICMP6_INC_STATS_BH(net, idev, field) \
- _DEVINC(net, icmpv6, _BH, idev, field)
+ _DEVINCATOMIC(net, icmpv6, _BH, idev, field)
#define ICMP6MSGOUT_INC_STATS(net, idev, field) \
- _DEVINC(net, icmpv6msg, , idev, field +256)
+ _DEVINCATOMIC(net, icmpv6msg, , idev, field +256)
#define ICMP6MSGOUT_INC_STATS_BH(net, idev, field) \
- _DEVINC(net, icmpv6msg, _BH, idev, field +256)
+ _DEVINCATOMIC(net, icmpv6msg, _BH, idev, field +256)
#define ICMP6MSGIN_INC_STATS_BH(net, idev, field) \
- _DEVINC(net, icmpv6msg, _BH, idev, field)
+ _DEVINCATOMIC(net, icmpv6msg, _BH, idev, field)
struct ip6_ra_chain {
struct ip6_ra_chain *next;
@@ -376,8 +379,8 @@
struct ip6_create_arg {
__be32 id;
u32 user;
- struct in6_addr *src;
- struct in6_addr *dst;
+ const struct in6_addr *src;
+ const struct in6_addr *dst;
};
void ip6_frag_init(struct inet_frag_queue *q, void *a);
@@ -667,5 +670,4 @@
extern void ipv6_static_sysctl_unregister(void);
#endif
-#endif /* __KERNEL__ */
#endif /* _NET_IPV6_H */
diff --git a/include/net/ipx.h b/include/net/ipx.h
index 05d7e4a..c1fec6b 100644
--- a/include/net/ipx.h
+++ b/include/net/ipx.h
@@ -80,7 +80,6 @@
atomic_t refcnt;
};
-#ifdef __KERNEL__
struct ipx_cb {
u8 ipx_tctrl;
__be32 ipx_dest_net;
@@ -116,7 +115,6 @@
}
#define IPX_SKB_CB(__skb) ((struct ipx_cb *)&((__skb)->cb[0]))
-#endif
#define IPX_MIN_EPHEMERAL_SOCKET 0x4000
#define IPX_MAX_EPHEMERAL_SOCKET 0x7fff
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index 75b8e296..f57e7d4 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -199,7 +199,7 @@
u8 ssap;
u8 ctrl_1;
u8 ctrl_2;
-};
+} __packed;
static inline struct llc_pdu_sn *llc_pdu_sn_hdr(struct sk_buff *skb)
{
@@ -211,7 +211,7 @@
u8 dsap;
u8 ssap;
u8 ctrl_1;
-};
+} __packed;
static inline struct llc_pdu_un *llc_pdu_un_hdr(struct sk_buff *skb)
{
@@ -359,7 +359,7 @@
u8 fmt_id; /* always 0x81 for LLC */
u8 type; /* different if NULL/non-NULL LSAP */
u8 rw; /* sender receive window */
-};
+} __packed;
/**
* llc_pdu_init_as_xid_cmd - sets bytes 3, 4 & 5 of LLC header as XID
@@ -415,7 +415,7 @@
u8 curr_ssv; /* current send state variable val */
u8 curr_rsv; /* current receive state variable */
u8 ind_bits; /* indicator bits set with macro */
-};
+} __packed;
extern void llc_pdu_set_cmd_rsp(struct sk_buff *skb, u8 type);
extern void llc_pdu_set_pf_bit(struct sk_buff *skb, u8 bit_value);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 025d4cc..8c7189c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -537,6 +537,21 @@
};
};
+/**
+ * ieee80211_sched_scan_ies - scheduled scan IEs
+ *
+ * This structure is used to pass the appropriate IEs to be used in scheduled
+ * scans for all bands. It contains both the IEs passed from the userspace
+ * and the ones generated by mac80211.
+ *
+ * @ie: array with the IEs for each supported band
+ * @len: array with the total length of the IEs for each band
+ */
+struct ieee80211_sched_scan_ies {
+ u8 *ie[IEEE80211_NUM_BANDS];
+ size_t len[IEEE80211_NUM_BANDS];
+};
+
static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
{
return (struct ieee80211_tx_info *)skb->cb;
@@ -1606,6 +1621,18 @@
* you should ensure to cancel it on this callback.
* Must be implemented and can sleep.
*
+ * @suspend: Suspend the device; mac80211 itself will quiesce before and
+ * stop transmitting and doing any other configuration, and then
+ * ask the device to suspend. This is only invoked when WoWLAN is
+ * configured, otherwise the device is deconfigured completely and
+ * reconfigured at resume time.
+ *
+ * @resume: If WoWLAN was configured, this indicates that mac80211 is
+ * now resuming its operation, after this the device must be fully
+ * functional again. If this returns an error, the only way out is
+ * to also unregister the device. If it returns 1, then mac80211
+ * will also go through the regular complete restart on resume.
+ *
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented.
@@ -1681,6 +1708,13 @@
* any error unless this callback returned a negative error code.
* The callback can sleep.
*
+ * @sched_scan_start: Ask the hardware to start scanning repeatedly at
+ * specific intervals. The driver must call the
+ * ieee80211_sched_scan_results() function whenever it finds results.
+ * This process will continue until sched_scan_stop is called.
+ *
+ * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
* The callback can sleep.
@@ -1819,11 +1853,22 @@
* @set_ringparam: Set tx and rx ring sizes.
*
* @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tx_frames_pending: Check if there is any pending frame in the hardware
+ * queues before entering power save.
+ *
+ * @set_bitrate_mask: Set a mask of rates to be used for rate control selection
+ * when transmitting a frame. Currently only legacy rates are handled.
+ * The callback can sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
+#ifdef CONFIG_PM
+ int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
+ int (*resume)(struct ieee80211_hw *hw);
+#endif
int (*add_interface)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
int (*change_interface)(struct ieee80211_hw *hw,
@@ -1854,6 +1899,12 @@
u32 iv32, u16 *phase1key);
int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct cfg80211_scan_request *req);
+ int (*sched_scan_start)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies);
+ void (*sched_scan_stop)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
void (*sw_scan_start)(struct ieee80211_hw *hw);
void (*sw_scan_complete)(struct ieee80211_hw *hw);
int (*get_stats)(struct ieee80211_hw *hw,
@@ -1906,6 +1957,9 @@
int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
void (*get_ringparam)(struct ieee80211_hw *hw,
u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+ bool (*tx_frames_pending)(struct ieee80211_hw *hw);
+ int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ const struct cfg80211_bitrate_mask *mask);
};
/**
@@ -2223,6 +2277,18 @@
#define IEEE80211_TX_STATUS_HEADROOM 13
/**
+ * ieee80211_sta_set_tim - set the TIM bit for a sleeping station
+ *
+ * If a driver buffers frames for a powersave station instead of passing
+ * them back to mac80211 for retransmission, the station needs to be told
+ * to wake up using the TIM bitmap in the beacon.
+ *
+ * This function sets the station's TIM bit - it will be cleared when the
+ * station wakes up.
+ */
+void ieee80211_sta_set_tim(struct ieee80211_sta *sta);
+
+/**
* ieee80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
@@ -2276,6 +2342,17 @@
struct sk_buff *skb);
/**
+ * ieee80211_report_low_ack - report non-responding station
+ *
+ * When operating in AP-mode, call this function to report a non-responding
+ * connected STA.
+ *
+ * @sta: the non-responding connected sta
+ * @num_packets: number of packets sent to @sta without a response
+ */
+void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
+
+/**
* ieee80211_beacon_get_tim - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
@@ -2545,6 +2622,28 @@
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
/**
+ * ieee80211_sched_scan_results - got results from scheduled scan
+ *
+ * When a scheduled scan is running, this function needs to be called by the
+ * driver whenever there are new scan results available.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped
+ *
+ * When a scheduled scan is running, this function can be called by
+ * the driver if it needs to stop the scan to perform another task.
+ * Usual scenarios are drivers that cannot continue the scheduled scan
+ * while associating, for instance.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
+
+/**
* ieee80211_iterate_active_interfaces - iterate active interfaces
*
* This function iterates over the interfaces associated with a given
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
index e0e594f..62beeb9 100644
--- a/include/net/ndisc.h
+++ b/include/net/ndisc.h
@@ -42,8 +42,6 @@
#define ND_REACHABLE_TIME (30*HZ)
#define ND_RETRANS_TIMER HZ
-#ifdef __KERNEL__
-
#include <linux/compiler.h>
#include <linux/icmpv6.h>
#include <linux/in6.h>
@@ -102,7 +100,8 @@
struct neighbour *neigh,
const struct in6_addr *target);
-extern int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int dir);
+extern int ndisc_mc_map(const struct in6_addr *addr, char *buf,
+ struct net_device *dev, int dir);
extern struct sk_buff *ndisc_build_skb(struct net_device *dev,
const struct in6_addr *daddr,
@@ -155,8 +154,4 @@
return ERR_PTR(-ENODEV);
}
-
-#endif /* __KERNEL__ */
-
-
#endif
diff --git a/include/net/netevent.h b/include/net/netevent.h
index 22b239c..086f8a5 100644
--- a/include/net/netevent.h
+++ b/include/net/netevent.h
@@ -10,7 +10,6 @@
*
* Changes:
*/
-#ifdef __KERNEL__
struct dst_entry;
@@ -29,4 +28,3 @@
extern int call_netevent_notifiers(unsigned long val, void *v);
#endif
-#endif
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index d0d1337..c7c42e7 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -14,7 +14,6 @@
#include <linux/netfilter/nf_conntrack_common.h>
-#ifdef __KERNEL__
#include <linux/bitops.h>
#include <linux/compiler.h>
#include <asm/atomic.h>
@@ -326,5 +325,4 @@
#define MODULE_ALIAS_NFCT_HELPER(helper) \
MODULE_ALIAS("nfct-helper-" helper)
-#endif /* __KERNEL__ */
#endif /* _NF_CONNTRACK_H */
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
index 4ee44c8..7ca6bdd 100644
--- a/include/net/netfilter/nf_conntrack_tuple.h
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -104,8 +104,6 @@
} src;
};
-#ifdef __KERNEL__
-
static inline void nf_ct_dump_tuple_ip(const struct nf_conntrack_tuple *t)
{
#ifdef DEBUG
@@ -148,8 +146,6 @@
struct nf_conntrack_tuple tuple;
};
-#endif /* __KERNEL__ */
-
static inline bool __nf_ct_tuple_src_equal(const struct nf_conntrack_tuple *t1,
const struct nf_conntrack_tuple *t2)
{
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index aff80b1..0346b00 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -48,7 +48,6 @@
struct nf_nat_range range[1];
};
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/netfilter/nf_conntrack_pptp.h>
#include <net/netfilter/nf_conntrack_extend.h>
@@ -93,7 +92,4 @@
#endif
}
-#else /* !__KERNEL__: iptables wants this to compile. */
-#define nf_nat_multi_range nf_nat_multi_range_compat
-#endif /*__KERNEL__*/
#endif
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 542195d..d786b4f 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -54,6 +54,8 @@
int sysctl_rt_cache_rebuild_count;
int current_rt_cache_rebuild_count;
+ unsigned int sysctl_ping_group_range[2];
+
atomic_t rt_genid;
atomic_t dev_addr_genid;
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 13649eb..8639de5 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -51,7 +51,7 @@
int phonet_route_add(struct net_device *dev, u8 daddr);
int phonet_route_del(struct net_device *dev, u8 daddr);
void rtm_phonet_notify(int event, struct net_device *dev, u8 dst);
-struct net_device *phonet_route_get(struct net *net, u8 daddr);
+struct net_device *phonet_route_get_rcu(struct net *net, u8 daddr);
struct net_device *phonet_route_output(struct net *net, u8 daddr);
#define PN_NO_ADDR 0xff
diff --git a/include/net/ping.h b/include/net/ping.h
new file mode 100644
index 0000000..682b5ae
--- /dev/null
+++ b/include/net/ping.h
@@ -0,0 +1,55 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions for the "ping" module.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _PING_H
+#define _PING_H
+
+#include <net/netns/hash.h>
+
+/* PING_HTABLE_SIZE must be power of 2 */
+#define PING_HTABLE_SIZE 64
+#define PING_HTABLE_MASK (PING_HTABLE_SIZE-1)
+
+#define ping_portaddr_for_each_entry(__sk, node, list) \
+ hlist_nulls_for_each_entry(__sk, node, list, sk_nulls_node)
+
+/*
+ * gid_t is either uint or ushort. We want to pass it to
+ * proc_dointvec_minmax(), so it must not be larger than MAX_INT
+ */
+#define GID_T_MAX (((gid_t)~0U) >> 1)
+
+struct ping_table {
+ struct hlist_nulls_head hash[PING_HTABLE_SIZE];
+ rwlock_t lock;
+};
+
+struct ping_iter_state {
+ struct seq_net_private p;
+ int bucket;
+};
+
+extern struct proto ping_prot;
+
+
+extern void ping_rcv(struct sk_buff *);
+extern void ping_err(struct sk_buff *, u32 info);
+
+#ifdef CONFIG_PROC_FS
+extern int __init ping_proc_init(void);
+extern void ping_proc_exit(void);
+#endif
+
+void __init ping_init(void);
+
+
+#endif /* _PING_H */
diff --git a/include/net/rawv6.h b/include/net/rawv6.h
index f6b9b83..cf75772 100644
--- a/include/net/rawv6.h
+++ b/include/net/rawv6.h
@@ -1,8 +1,6 @@
#ifndef _NET_RAWV6_H
#define _NET_RAWV6_H
-#ifdef __KERNEL__
-
#include <net/protocol.h>
void raw6_icmp_error(struct sk_buff *, int nexthdr,
@@ -20,5 +18,3 @@
#endif
#endif
-
-#endif
diff --git a/include/net/route.h b/include/net/route.h
index 8fce062..db7b343 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -35,16 +35,8 @@
#include <linux/cache.h>
#include <linux/security.h>
-#ifndef __KERNEL__
-#warning This file is not supposed to be used outside of kernel.
-#endif
-
#define RTO_ONLINK 0x01
-#define RTO_CONN 0
-/* RTO_CONN is not used (being alias for 0), but preserved not to break
- * some modules referring to it. */
-
#define RT_CONN_FLAGS(sk) (RT_TOS(inet_sk(sk)->tos) | sock_flag(sk, SOCK_LOCALROUTE))
struct fib_nh;
@@ -60,7 +52,7 @@
int rt_genid;
unsigned rt_flags;
__u16 rt_type;
- __u8 rt_tos;
+ __u8 rt_key_tos;
__be32 rt_dst; /* Path destination */
__be32 rt_src; /* Path source */
@@ -123,7 +115,7 @@
__be32 src, struct net_device *dev);
extern void rt_cache_flush(struct net *net, int how);
extern void rt_cache_flush_batch(struct net *net);
-extern struct rtable *__ip_route_output_key(struct net *, const struct flowi4 *flp);
+extern struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp);
extern struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp,
struct sock *sk);
extern struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_orig);
@@ -145,40 +137,33 @@
return ip_route_output_key(net, &fl4);
}
-static inline struct rtable *ip_route_output_ports(struct net *net, struct sock *sk,
+static inline struct rtable *ip_route_output_ports(struct net *net, struct flowi4 *fl4,
+ struct sock *sk,
__be32 daddr, __be32 saddr,
__be16 dport, __be16 sport,
__u8 proto, __u8 tos, int oif)
{
- struct flowi4 fl4 = {
- .flowi4_oif = oif,
- .flowi4_flags = sk ? inet_sk_flowi_flags(sk) : 0,
- .flowi4_mark = sk ? sk->sk_mark : 0,
- .daddr = daddr,
- .saddr = saddr,
- .flowi4_tos = tos,
- .flowi4_proto = proto,
- .fl4_dport = dport,
- .fl4_sport = sport,
- };
+ flowi4_init_output(fl4, oif, sk ? sk->sk_mark : 0, tos,
+ RT_SCOPE_UNIVERSE, proto,
+ sk ? inet_sk_flowi_flags(sk) : 0,
+ daddr, saddr, dport, sport);
if (sk)
- security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
- return ip_route_output_flow(net, &fl4, sk);
+ security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+ return ip_route_output_flow(net, fl4, sk);
}
-static inline struct rtable *ip_route_output_gre(struct net *net,
+static inline struct rtable *ip_route_output_gre(struct net *net, struct flowi4 *fl4,
__be32 daddr, __be32 saddr,
__be32 gre_key, __u8 tos, int oif)
{
- struct flowi4 fl4 = {
- .flowi4_oif = oif,
- .daddr = daddr,
- .saddr = saddr,
- .flowi4_tos = tos,
- .flowi4_proto = IPPROTO_GRE,
- .fl4_gre_key = gre_key,
- };
- return ip_route_output_key(net, &fl4);
+ memset(fl4, 0, sizeof(*fl4));
+ fl4->flowi4_oif = oif;
+ fl4->daddr = daddr;
+ fl4->saddr = saddr;
+ fl4->flowi4_tos = tos;
+ fl4->flowi4_proto = IPPROTO_GRE;
+ fl4->fl4_gre_key = gre_key;
+ return ip_route_output_key(net, fl4);
}
extern int ip_route_input_common(struct sk_buff *skb, __be32 dst, __be32 src,
@@ -196,14 +181,15 @@
return ip_route_input_common(skb, dst, src, tos, devin, true);
}
-extern unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph, unsigned short new_mtu, struct net_device *dev);
+extern unsigned short ip_rt_frag_needed(struct net *net, const struct iphdr *iph,
+ unsigned short new_mtu, struct net_device *dev);
extern void ip_rt_send_redirect(struct sk_buff *skb);
extern unsigned inet_addr_type(struct net *net, __be32 addr);
extern unsigned inet_dev_addr_type(struct net *net, const struct net_device *dev, __be32 addr);
extern void ip_rt_multicast_event(struct in_device *);
extern int ip_rt_ioctl(struct net *, unsigned int cmd, void __user *arg);
-extern void ip_rt_get_source(u8 *src, struct rtable *rt);
+extern void ip_rt_get_source(u8 *src, struct sk_buff *skb, struct rtable *rt);
extern int ip_rt_dump(struct sk_buff *skb, struct netlink_callback *cb);
struct in_ifaddr;
@@ -225,78 +211,93 @@
return ip_tos2prio[IPTOS_TOS(tos)>>1];
}
-static inline struct rtable *ip_route_connect(__be32 dst, __be32 src, u32 tos,
+/* ip_route_connect() and ip_route_newports() work in tandem whilst
+ * binding a socket for a new outgoing connection.
+ *
+ * In order to use IPSEC properly, we must, in the end, have a
+ * route that was looked up using all available keys including source
+ * and destination ports.
+ *
+ * However, if a source port needs to be allocated (the user specified
+ * a wildcard source port) we need to obtain addressing information
+ * in order to perform that allocation.
+ *
+ * So ip_route_connect() looks up a route using wildcarded source and
+ * destination ports in the key, simply so that we can get a pair of
+ * addresses to use for port allocation.
+ *
+ * Later, once the ports are allocated, ip_route_newports() will make
+ * another route lookup if needed to make sure we catch any IPSEC
+ * rules keyed on the port information.
+ *
+ * The callers allocate the flow key on their stack, and must pass in
+ * the same flowi4 object to both the ip_route_connect() and the
+ * ip_route_newports() calls.
+ */
+
+static inline void ip_route_connect_init(struct flowi4 *fl4, __be32 dst, __be32 src,
+ u32 tos, int oif, u8 protocol,
+ __be16 sport, __be16 dport,
+ struct sock *sk, bool can_sleep)
+{
+ __u8 flow_flags = 0;
+
+ if (inet_sk(sk)->transparent)
+ flow_flags |= FLOWI_FLAG_ANYSRC;
+ if (protocol == IPPROTO_TCP)
+ flow_flags |= FLOWI_FLAG_PRECOW_METRICS;
+ if (can_sleep)
+ flow_flags |= FLOWI_FLAG_CAN_SLEEP;
+
+ flowi4_init_output(fl4, oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE,
+ protocol, flow_flags, dst, src, dport, sport);
+}
+
+static inline struct rtable *ip_route_connect(struct flowi4 *fl4,
+ __be32 dst, __be32 src, u32 tos,
int oif, u8 protocol,
__be16 sport, __be16 dport,
struct sock *sk, bool can_sleep)
{
- struct flowi4 fl4 = {
- .flowi4_oif = oif,
- .flowi4_mark = sk->sk_mark,
- .daddr = dst,
- .saddr = src,
- .flowi4_tos = tos,
- .flowi4_proto = protocol,
- .fl4_sport = sport,
- .fl4_dport = dport,
- };
struct net *net = sock_net(sk);
struct rtable *rt;
- if (inet_sk(sk)->transparent)
- fl4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
- if (protocol == IPPROTO_TCP)
- fl4.flowi4_flags |= FLOWI_FLAG_PRECOW_METRICS;
- if (can_sleep)
- fl4.flowi4_flags |= FLOWI_FLAG_CAN_SLEEP;
+ ip_route_connect_init(fl4, dst, src, tos, oif, protocol,
+ sport, dport, sk, can_sleep);
if (!dst || !src) {
- rt = __ip_route_output_key(net, &fl4);
+ rt = __ip_route_output_key(net, fl4);
if (IS_ERR(rt))
return rt;
- fl4.daddr = rt->rt_dst;
- fl4.saddr = rt->rt_src;
ip_rt_put(rt);
}
- security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
- return ip_route_output_flow(net, &fl4, sk);
+ security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+ return ip_route_output_flow(net, fl4, sk);
}
-static inline struct rtable *ip_route_newports(struct rtable *rt,
- u8 protocol, __be16 orig_sport,
- __be16 orig_dport, __be16 sport,
- __be16 dport, struct sock *sk)
+static inline struct rtable *ip_route_newports(struct flowi4 *fl4, struct rtable *rt,
+ __be16 orig_sport, __be16 orig_dport,
+ __be16 sport, __be16 dport,
+ struct sock *sk)
{
if (sport != orig_sport || dport != orig_dport) {
- struct flowi4 fl4 = {
- .flowi4_oif = rt->rt_oif,
- .flowi4_mark = rt->rt_mark,
- .daddr = rt->rt_dst,
- .saddr = rt->rt_src,
- .flowi4_tos = rt->rt_tos,
- .flowi4_proto = protocol,
- .fl4_sport = sport,
- .fl4_dport = dport
- };
- if (inet_sk(sk)->transparent)
- fl4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
- if (protocol == IPPROTO_TCP)
- fl4.flowi4_flags |= FLOWI_FLAG_PRECOW_METRICS;
+ fl4->fl4_dport = dport;
+ fl4->fl4_sport = sport;
ip_rt_put(rt);
- security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
- return ip_route_output_flow(sock_net(sk), &fl4, sk);
+ security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+ return ip_route_output_flow(sock_net(sk), fl4, sk);
}
return rt;
}
-extern void rt_bind_peer(struct rtable *rt, int create);
+extern void rt_bind_peer(struct rtable *rt, __be32 daddr, int create);
-static inline struct inet_peer *rt_get_peer(struct rtable *rt)
+static inline struct inet_peer *rt_get_peer(struct rtable *rt, __be32 daddr)
{
if (rt->peer)
return rt->peer;
- rt_bind_peer(rt, 0);
+ rt_bind_peer(rt, daddr, 0);
return rt->peer;
}
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index c01dc99..2b44764 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -73,7 +73,6 @@
SCTP_CMD_INIT_FAILED, /* High level, do init failure work. */
SCTP_CMD_REPORT_DUP, /* Report a duplicate TSN. */
SCTP_CMD_STRIKE, /* Mark a strike against a transport. */
- SCTP_CMD_TRANSMIT, /* Transmit the outqueue. */
SCTP_CMD_HB_TIMERS_START, /* Start the heartbeat timers. */
SCTP_CMD_HB_TIMER_UPDATE, /* Update a heartbeat timers. */
SCTP_CMD_HB_TIMERS_STOP, /* Stop the heartbeat timers. */
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index c70d8cc..942b864 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -150,7 +150,6 @@
SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE, sctp_event_primitive_t, primitive)
-#define sctp_chunk_is_control(a) (a->chunk_hdr->type != SCTP_CID_DATA)
#define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA)
/* Calculate the actual data size in a data chunk */
@@ -188,15 +187,14 @@
/* SCTP state defines for internal state machine */
typedef enum {
- SCTP_STATE_EMPTY = 0,
- SCTP_STATE_CLOSED = 1,
- SCTP_STATE_COOKIE_WAIT = 2,
- SCTP_STATE_COOKIE_ECHOED = 3,
- SCTP_STATE_ESTABLISHED = 4,
- SCTP_STATE_SHUTDOWN_PENDING = 5,
- SCTP_STATE_SHUTDOWN_SENT = 6,
- SCTP_STATE_SHUTDOWN_RECEIVED = 7,
- SCTP_STATE_SHUTDOWN_ACK_SENT = 8,
+ SCTP_STATE_CLOSED = 0,
+ SCTP_STATE_COOKIE_WAIT = 1,
+ SCTP_STATE_COOKIE_ECHOED = 2,
+ SCTP_STATE_ESTABLISHED = 3,
+ SCTP_STATE_SHUTDOWN_PENDING = 4,
+ SCTP_STATE_SHUTDOWN_SENT = 5,
+ SCTP_STATE_SHUTDOWN_RECEIVED = 6,
+ SCTP_STATE_SHUTDOWN_ACK_SENT = 7,
} sctp_state_t;
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 505845d..b2c2366 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -115,7 +115,6 @@
* sctp/protocol.c
*/
extern struct sock *sctp_get_ctl_sock(void);
-extern void sctp_local_addr_free(struct rcu_head *head);
extern int sctp_copy_local_addr_list(struct sctp_bind_addr *,
sctp_scope_t, gfp_t gfp,
int flags);
@@ -531,7 +530,6 @@
#define _sctp_walk_params(pos, chunk, end, member)\
for (pos.v = chunk->member;\
- pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\
pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
pos.v += WORD_ROUND(ntohs(pos.p->length)))
@@ -542,7 +540,6 @@
#define _sctp_walk_errors(err, chunk_hdr, end)\
for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
sizeof(sctp_chunkhdr_t));\
- (void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\
(void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
ntohs(err->length) >= sizeof(sctp_errhdr_t); \
err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 9352d12..9148632 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -165,6 +165,7 @@
sctp_state_fn_t sctp_sf_do_prm_asconf;
/* Prototypes for other event state functions. */
+sctp_state_fn_t sctp_sf_do_no_pending_tsn;
sctp_state_fn_t sctp_sf_do_9_2_start_shutdown;
sctp_state_fn_t sctp_sf_do_9_2_shutdown_ack;
sctp_state_fn_t sctp_sf_ignore_other;
@@ -232,9 +233,7 @@
const struct sctp_chunk *,
struct sctp_paramhdr *);
struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
- const struct sctp_transport *,
- const void *payload,
- const size_t paylen);
+ const struct sctp_transport *);
struct sctp_chunk *sctp_make_heartbeat_ack(const struct sctp_association *,
const struct sctp_chunk *,
const void *payload,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 0f6e60a..795f488 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -564,19 +564,15 @@
int optname,
char __user *optval,
int __user *optlen);
- struct dst_entry *(*get_dst) (struct sctp_association *asoc,
- union sctp_addr *daddr,
- union sctp_addr *saddr);
+ void (*get_dst) (struct sctp_transport *t,
+ union sctp_addr *saddr,
+ struct flowi *fl,
+ struct sock *sk);
void (*get_saddr) (struct sctp_sock *sk,
- struct sctp_association *asoc,
- struct dst_entry *dst,
- union sctp_addr *daddr,
- union sctp_addr *saddr);
+ struct sctp_transport *t,
+ struct flowi *fl);
void (*copy_addrlist) (struct list_head *,
struct net_device *);
- void (*dst_saddr) (union sctp_addr *saddr,
- struct dst_entry *dst,
- __be16 port);
int (*cmp_addr) (const union sctp_addr *addr1,
const union sctp_addr *addr2);
void (*addr_copy) (union sctp_addr *dst,
@@ -898,6 +894,7 @@
/* Is this structure kfree()able? */
malloced:1;
+ struct flowi fl;
/* This is the peer's IP address and port. */
union sctp_addr ipaddr;
@@ -1061,7 +1058,7 @@
struct sctp_association *);
void sctp_transport_route(struct sctp_transport *, union sctp_addr *,
struct sctp_sock *);
-void sctp_transport_pmtu(struct sctp_transport *);
+void sctp_transport_pmtu(struct sctp_transport *, struct sock *sk);
void sctp_transport_free(struct sctp_transport *);
void sctp_transport_reset_timers(struct sctp_transport *);
void sctp_transport_hold(struct sctp_transport *);
@@ -1400,7 +1397,7 @@
int sctp_verify_init(const struct sctp_association *asoc, sctp_cid_t,
sctp_init_chunk_t *peer_init, struct sctp_chunk *chunk,
struct sctp_chunk **err_chunk);
-int sctp_process_init(struct sctp_association *, sctp_cid_t cid,
+int sctp_process_init(struct sctp_association *, struct sctp_chunk *chunk,
const union sctp_addr *peer,
sctp_init_chunk_t *init, gfp_t gfp);
__u32 sctp_generate_tag(const struct sctp_endpoint *);
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 7ea12e8..99b027b 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -132,6 +132,9 @@
const struct sctp_association *asoc, __u16 key_id,
__u32 indication, gfp_t gfp);
+struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
+ const struct sctp_association *asoc, gfp_t gfp);
+
void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
struct msghdr *);
__u16 sctp_ulpevent_get_notification_type(const struct sctp_ulpevent *event);
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index e73ebda..32fd512 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -91,6 +91,7 @@
#define SCTP_PEER_AUTH_CHUNKS 26 /* Read only */
#define SCTP_LOCAL_AUTH_CHUNKS 27 /* Read only */
#define SCTP_GET_ASSOC_NUMBER 28 /* Read only */
+#define SCTP_GET_ASSOC_ID_LIST 29 /* Read only */
/* Internal Socket Options. Some of the sctp library functions are
* implemented using these socket options.
@@ -353,6 +354,20 @@
enum { SCTP_AUTH_NEWKEY = 0, };
+/*
+ * 6.1.9. SCTP_SENDER_DRY_EVENT
+ *
+ * When the SCTP stack has no more user data to send or retransmit, this
+ * notification is given to the user. Also, at the time when a user app
+ * subscribes to this event, if there is no data to be sent or
+ * retransmit, the stack will immediately send up this notification.
+ */
+struct sctp_sender_dry_event {
+ __u16 sender_dry_type;
+ __u16 sender_dry_flags;
+ __u32 sender_dry_length;
+ sctp_assoc_t sender_dry_assoc_id;
+};
/*
* Described in Section 7.3
@@ -368,6 +383,7 @@
__u8 sctp_partial_delivery_event;
__u8 sctp_adaptation_layer_event;
__u8 sctp_authentication_event;
+ __u8 sctp_sender_dry_event;
};
/*
@@ -391,6 +407,7 @@
struct sctp_adaptation_event sn_adaptation_event;
struct sctp_pdapi_event sn_pdapi_event;
struct sctp_authkey_event sn_authkey_event;
+ struct sctp_sender_dry_event sn_sender_dry_event;
};
/* Section 5.3.1
@@ -407,7 +424,9 @@
SCTP_SHUTDOWN_EVENT,
SCTP_PARTIAL_DELIVERY_EVENT,
SCTP_ADAPTATION_INDICATION,
- SCTP_AUTHENTICATION_INDICATION,
+ SCTP_AUTHENTICATION_EVENT,
+#define SCTP_AUTHENTICATION_INDICATION SCTP_AUTHENTICATION_EVENT
+ SCTP_SENDER_DRY_EVENT,
};
/* Notification error codes used to fill up the error fields in some
@@ -669,6 +688,18 @@
};
/*
+ * 8.2.6. Get the Current Identifiers of Associations
+ * (SCTP_GET_ASSOC_ID_LIST)
+ *
+ * This option gets the current list of SCTP association identifiers of
+ * the SCTP associations handled by a one-to-many style socket.
+ */
+struct sctp_assoc_ids {
+ __u32 gaids_number_of_ids;
+ sctp_assoc_t gaids_assoc_id[];
+};
+
+/*
* 8.3, 8.5 get all peer/local addresses in an association.
* This parameter struct is used by SCTP_GET_PEER_ADDRS and
* SCTP_GET_LOCAL_ADDRS socket options used internally to implement
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 27461d6..479083a 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -72,14 +72,24 @@
/* ICMP6 (IPv6-ICMP) */
#define ICMP6_MIB_MAX __ICMP6_MIB_MAX
+/* per network ns counters */
struct icmpv6_mib {
unsigned long mibs[ICMP6_MIB_MAX];
};
+/* per device counters, (shared on all cpus) */
+struct icmpv6_mib_device {
+ atomic_long_t mibs[ICMP6_MIB_MAX];
+};
#define ICMP6MSG_MIB_MAX __ICMP6MSG_MIB_MAX
+/* per network ns counters */
struct icmpv6msg_mib {
unsigned long mibs[ICMP6MSG_MIB_MAX];
};
+/* per device counters, (shared on all cpus) */
+struct icmpv6msg_mib_device {
+ atomic_long_t mibs[ICMP6MSG_MIB_MAX];
+};
/* TCP */
@@ -114,6 +124,8 @@
*/
#define DEFINE_SNMP_STAT(type, name) \
__typeof__(type) __percpu *name[2]
+#define DEFINE_SNMP_STAT_ATOMIC(type, name) \
+ __typeof__(type) *name
#define DECLARE_SNMP_STAT(type, name) \
extern __typeof__(type) __percpu *name[2]
@@ -124,6 +136,8 @@
__this_cpu_inc(mib[0]->mibs[field])
#define SNMP_INC_STATS_USER(mib, field) \
this_cpu_inc(mib[1]->mibs[field])
+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) \
+ atomic_long_inc(&mib->mibs[field])
#define SNMP_INC_STATS(mib, field) \
this_cpu_inc(mib[!in_softirq()]->mibs[field])
#define SNMP_DEC_STATS(mib, field) \
diff --git a/include/net/sock.h b/include/net/sock.h
index 01810a3..f2046e4 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -52,6 +52,7 @@
#include <linux/mm.h>
#include <linux/security.h>
#include <linux/slab.h>
+#include <linux/uaccess.h>
#include <linux/filter.h>
#include <linux/rculist_nulls.h>
@@ -1389,6 +1390,59 @@
sk->sk_route_caps &= ~flags;
}
+static inline int skb_do_copy_data_nocache(struct sock *sk, struct sk_buff *skb,
+ char __user *from, char *to,
+ int copy, int offset)
+{
+ if (skb->ip_summed == CHECKSUM_NONE) {
+ int err = 0;
+ __wsum csum = csum_and_copy_from_user(from, to, copy, 0, &err);
+ if (err)
+ return err;
+ skb->csum = csum_block_add(skb->csum, csum, offset);
+ } else if (sk->sk_route_caps & NETIF_F_NOCACHE_COPY) {
+ if (!access_ok(VERIFY_READ, from, copy) ||
+ __copy_from_user_nocache(to, from, copy))
+ return -EFAULT;
+ } else if (copy_from_user(to, from, copy))
+ return -EFAULT;
+
+ return 0;
+}
+
+static inline int skb_add_data_nocache(struct sock *sk, struct sk_buff *skb,
+ char __user *from, int copy)
+{
+ int err, offset = skb->len;
+
+ err = skb_do_copy_data_nocache(sk, skb, from, skb_put(skb, copy),
+ copy, offset);
+ if (err)
+ __skb_trim(skb, offset);
+
+ return err;
+}
+
+static inline int skb_copy_to_page_nocache(struct sock *sk, char __user *from,
+ struct sk_buff *skb,
+ struct page *page,
+ int off, int copy)
+{
+ int err;
+
+ err = skb_do_copy_data_nocache(sk, skb, from, page_address(page) + off,
+ copy, skb->len);
+ if (err)
+ return err;
+
+ skb->len += copy;
+ skb->data_len += copy;
+ skb->truesize += copy;
+ sk->sk_wmem_queued += copy;
+ sk_mem_charge(sk, copy);
+ return 0;
+}
+
static inline int skb_copy_to_page(struct sock *sk, char __user *from,
struct sk_buff *skb, struct page *page,
int off, int copy)
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index a8122dc..5271a74 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -7,8 +7,6 @@
* IPv6 transport protocols
*/
-#ifdef __KERNEL__
-
extern struct proto rawv6_prot;
extern struct proto udpv6_prot;
extern struct proto udplitev6_prot;
@@ -57,5 +55,3 @@
extern void inet6_destroy_sock(struct sock *sk);
#endif
-
-#endif
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c799ba7..7328d50 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -250,7 +250,6 @@
#ifndef __NET__WIMAX_H__
#define __NET__WIMAX_H__
-#ifdef __KERNEL__
#include <linux/wimax.h>
#include <net/genetlink.h>
@@ -518,8 +517,4 @@
extern int wimax_rfkill(struct wimax_dev *, enum wimax_rf_state);
extern int wimax_reset(struct wimax_dev *);
-#else
-/* You might be looking for linux/wimax.h */
-#error This file should not be included from user space.
-#endif /* #ifdef __KERNEL__ */
#endif /* #ifndef __NET__WIMAX_H__ */
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6ae4bc5..b203e14 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -324,6 +324,7 @@
int (*tmpl_sort)(struct xfrm_tmpl **dst, struct xfrm_tmpl **src, int n);
int (*state_sort)(struct xfrm_state **dst, struct xfrm_state **src, int n);
int (*output)(struct sk_buff *skb);
+ int (*output_finish)(struct sk_buff *skb);
int (*extract_input)(struct xfrm_state *x,
struct sk_buff *skb);
int (*extract_output)(struct xfrm_state *x,
@@ -957,6 +958,15 @@
struct xfrm_state *xvec[XFRM_MAX_DEPTH];
};
+static inline int secpath_exists(struct sk_buff *skb)
+{
+#ifdef CONFIG_XFRM
+ return skb->sp != NULL;
+#else
+ return 0;
+#endif
+}
+
static inline struct sec_path *
secpath_get(struct sec_path *sp)
{
@@ -1454,6 +1464,7 @@
extern int xfrm4_extract_output(struct xfrm_state *x, struct sk_buff *skb);
extern int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
extern int xfrm4_output(struct sk_buff *skb);
+extern int xfrm4_output_finish(struct sk_buff *skb);
extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family);
extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family);
extern int xfrm6_extract_header(struct sk_buff *skb);
@@ -1466,10 +1477,11 @@
extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family);
extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family);
extern __be32 xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr);
-extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr);
+extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr);
extern int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb);
extern int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
extern int xfrm6_output(struct sk_buff *skb);
+extern int xfrm6_output_finish(struct sk_buff *skb);
extern int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
u8 **prevhdr);
@@ -1560,8 +1572,8 @@
case AF_INET:
return (__force u32)a->a4 - (__force u32)b->a4;
case AF_INET6:
- return ipv6_addr_cmp((struct in6_addr *)a,
- (struct in6_addr *)b);
+ return ipv6_addr_cmp((const struct in6_addr *)a,
+ (const struct in6_addr *)b);
}
}
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index b5fc9f3..ae8c68f 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -217,18 +217,19 @@
static inline int iboe_get_rate(struct net_device *dev)
{
struct ethtool_cmd cmd;
+ u32 speed;
- if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings ||
- dev->ethtool_ops->get_settings(dev, &cmd))
+ if (dev_ethtool_get_settings(dev, &cmd))
return IB_RATE_PORT_CURRENT;
- if (cmd.speed >= 40000)
+ speed = ethtool_cmd_speed(&cmd);
+ if (speed >= 40000)
return IB_RATE_40_GBPS;
- else if (cmd.speed >= 30000)
+ else if (speed >= 30000)
return IB_RATE_30_GBPS;
- else if (cmd.speed >= 20000)
+ else if (speed >= 20000)
return IB_RATE_20_GBPS;
- else if (cmd.speed >= 10000)
+ else if (speed >= 10000)
return IB_RATE_10_GBPS;
else
return IB_RATE_PORT_CURRENT;
diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h
index cbb822e..2d0191c 100644
--- a/include/rdma/iw_cm.h
+++ b/include/rdma/iw_cm.h
@@ -46,18 +46,9 @@
IW_CM_EVENT_CLOSE /* close complete */
};
-enum iw_cm_event_status {
- IW_CM_EVENT_STATUS_OK = 0, /* request successful */
- IW_CM_EVENT_STATUS_ACCEPTED = 0, /* connect request accepted */
- IW_CM_EVENT_STATUS_REJECTED, /* connect request rejected */
- IW_CM_EVENT_STATUS_TIMEOUT, /* the operation timed out */
- IW_CM_EVENT_STATUS_RESET, /* reset from remote peer */
- IW_CM_EVENT_STATUS_EINVAL, /* asynchronous failure for bad parm */
-};
-
struct iw_cm_event {
enum iw_cm_event_type event;
- enum iw_cm_event_status status;
+ int status;
struct sockaddr_in local_addr;
struct sockaddr_in remote_addr;
void *private_data;
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 4fae903..169f7a5 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -329,4 +329,14 @@
*/
void rdma_set_service_type(struct rdma_cm_id *id, int tos);
+/**
+ * rdma_set_reuseaddr - Allow the reuse of local addresses when binding
+ * the rdma_cm_id.
+ * @id: Communication identifier to configure.
+ * @reuse: Value indicating if the bound address is reusable.
+ *
+ * Reuse must be set before an address is bound to the id.
+ */
+int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse);
+
#endif /* RDMA_CM_H */
diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h
index 1d16502..fc82c18 100644
--- a/include/rdma/rdma_user_cm.h
+++ b/include/rdma/rdma_user_cm.h
@@ -221,8 +221,9 @@
/* Option details */
enum {
- RDMA_OPTION_ID_TOS = 0,
- RDMA_OPTION_IB_PATH = 1
+ RDMA_OPTION_ID_TOS = 0,
+ RDMA_OPTION_ID_REUSEADDR = 1,
+ RDMA_OPTION_IB_PATH = 1
};
struct rdma_ucm_set_option {
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 2d3ec50..dd82e02 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -169,6 +169,7 @@
sdev_dev;
struct execute_work ew; /* used to get process context on put */
+ struct work_struct requeue_work;
struct scsi_dh_data *scsi_dh_data;
enum scsi_device_state sdev_state;
diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h
index e3615c0..9fe3a36 100644
--- a/include/trace/events/gfpflags.h
+++ b/include/trace/events/gfpflags.h
@@ -10,6 +10,7 @@
*/
#define show_gfp_flags(flags) \
(flags) ? __print_flags(flags, "|", \
+ {(unsigned long)GFP_TRANSHUGE, "GFP_TRANSHUGE"}, \
{(unsigned long)GFP_HIGHUSER_MOVABLE, "GFP_HIGHUSER_MOVABLE"}, \
{(unsigned long)GFP_HIGHUSER, "GFP_HIGHUSER"}, \
{(unsigned long)GFP_USER, "GFP_USER"}, \
@@ -32,6 +33,9 @@
{(unsigned long)__GFP_HARDWALL, "GFP_HARDWALL"}, \
{(unsigned long)__GFP_THISNODE, "GFP_THISNODE"}, \
{(unsigned long)__GFP_RECLAIMABLE, "GFP_RECLAIMABLE"}, \
- {(unsigned long)__GFP_MOVABLE, "GFP_MOVABLE"} \
+ {(unsigned long)__GFP_MOVABLE, "GFP_MOVABLE"}, \
+ {(unsigned long)__GFP_NOTRACK, "GFP_NOTRACK"}, \
+ {(unsigned long)__GFP_NO_KSWAPD, "GFP_NO_KSWAPD"}, \
+ {(unsigned long)__GFP_OTHER_NODE, "GFP_OTHER_NODE"} \
) : "GFP_NOWAIT"
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index 1c09820..ae045ca 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -20,8 +20,7 @@
softirq_name(BLOCK_IOPOLL), \
softirq_name(TASKLET), \
softirq_name(SCHED), \
- softirq_name(HRTIMER), \
- softirq_name(RCU))
+ softirq_name(HRTIMER))
/**
* irq_handler_entry - called immediately before the irq action handler
diff --git a/include/xen/events.h b/include/xen/events.h
index f1b87ad..9af21e1 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -85,7 +85,8 @@
int xen_allocate_pirq_msi(struct pci_dev *dev, struct msi_desc *msidesc);
/* Bind an PSI pirq to an irq. */
int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
- int pirq, int vector, const char *name);
+ int pirq, int vector, const char *name,
+ domid_t domid);
#endif
/* De-allocates the above mentioned physical interrupt. */
@@ -94,4 +95,10 @@
/* Return irq from pirq */
int xen_irq_from_pirq(unsigned pirq);
+/* Return the pirq allocated to the irq. */
+int xen_pirq_from_irq(unsigned irq);
+
+/* Determine whether to ignore this IRQ if it is passed to a guest. */
+int xen_test_irq_shared(int irq);
+
#endif /* _XEN_EVENTS_H */
diff --git a/init/Kconfig b/init/Kconfig
index d886b1e..4986ecc 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -485,7 +485,7 @@
config RCU_BOOST
bool "Enable RCU priority boosting"
- depends on RT_MUTEXES && TINY_PREEMPT_RCU
+ depends on RT_MUTEXES && PREEMPT_RCU
default n
help
This option boosts the priority of preempted RCU readers that
@@ -827,6 +827,11 @@
desktop applications. Task group autogeneration is currently based
upon task session.
+config SCHED_TTWU_QUEUE
+ bool
+ depends on !SPARC32
+ default y
+
config MM_OWNER
bool
@@ -1226,7 +1231,6 @@
per cpu and per node queues.
config SLUB
- depends on BROKEN || NUMA || !DISCONTIGMEM
bool "SLUB (Unqueued Allocator)"
help
SLUB is a slab allocator that minimizes cache line usage
diff --git a/init/main.c b/init/main.c
index 4a9479e..48df882 100644
--- a/init/main.c
+++ b/init/main.c
@@ -580,8 +580,8 @@
#endif
page_cgroup_init();
enable_debug_pagealloc();
- kmemleak_init();
debug_objects_mem_init();
+ kmemleak_init();
setup_per_cpu_pageset();
numa_policy_init();
if (late_time_init)
diff --git a/kernel/Makefile b/kernel/Makefile
index 85cbfb3..e9cf191 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -21,7 +21,6 @@
CFLAGS_REMOVE_rtmutex-debug.o = -pg
CFLAGS_REMOVE_cgroup-debug.o = -pg
CFLAGS_REMOVE_sched_clock.o = -pg
-CFLAGS_REMOVE_perf_event.o = -pg
CFLAGS_REMOVE_irq_work.o = -pg
endif
@@ -103,8 +102,9 @@
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
+
+obj-$(CONFIG_PERF_EVENTS) += events/
+
obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
obj-$(CONFIG_PADATA) += padata.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
diff --git a/kernel/capability.c b/kernel/capability.c
index bf0c734..32a80e0 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -399,3 +399,15 @@
return ns_capable(task_cred_xxx(t, user)->user_ns, cap);
}
EXPORT_SYMBOL(task_ns_capable);
+
+/**
+ * nsown_capable - Check superior capability to one's own user_ns
+ * @cap: The capability in question
+ *
+ * Return true if the current task has the given superior capability
+ * targeted at its own user namespace.
+ */
+bool nsown_capable(int cap)
+{
+ return ns_capable(current_user_ns(), cap);
+}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 25c7eb5..909a355 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -326,12 +326,6 @@
return &css_set_table[index];
}
-static void free_css_set_rcu(struct rcu_head *obj)
-{
- struct css_set *cg = container_of(obj, struct css_set, rcu_head);
- kfree(cg);
-}
-
/* We don't maintain the lists running through each css_set to its
* task until after the first call to cgroup_iter_start(). This
* reduces the fork()/exit() overhead for people who have cgroups
@@ -375,7 +369,7 @@
}
write_unlock(&css_set_lock);
- call_rcu(&cg->rcu_head, free_css_set_rcu);
+ kfree_rcu(cg, rcu_head);
}
/*
@@ -812,13 +806,6 @@
return ret;
}
-static void free_cgroup_rcu(struct rcu_head *obj)
-{
- struct cgroup *cgrp = container_of(obj, struct cgroup, rcu_head);
-
- kfree(cgrp);
-}
-
static void cgroup_diput(struct dentry *dentry, struct inode *inode)
{
/* is dentry a directory ? if so, kfree() associated cgroup */
@@ -856,7 +843,7 @@
*/
BUG_ON(!list_empty(&cgrp->pidlists));
- call_rcu(&cgrp->rcu_head, free_cgroup_rcu);
+ kfree_rcu(cgrp, rcu_head);
}
iput(inode);
}
@@ -4623,14 +4610,6 @@
return ret;
}
-static void __free_css_id_cb(struct rcu_head *head)
-{
- struct css_id *id;
-
- id = container_of(head, struct css_id, rcu_head);
- kfree(id);
-}
-
void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css)
{
struct css_id *id = css->id;
@@ -4645,7 +4624,7 @@
spin_lock(&ss->id_lock);
idr_remove(&ss->idr, id->id);
spin_unlock(&ss->id_lock);
- call_rcu(&id->rcu_head, __free_css_id_cb);
+ kfree_rcu(id, rcu_head);
}
EXPORT_SYMBOL_GPL(free_css_id);
diff --git a/kernel/compat.c b/kernel/compat.c
index 38b1d2c..9214dcd 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -890,10 +890,9 @@
{
compat_sigset_t s32;
sigset_t s;
- int sig;
struct timespec t;
siginfo_t info;
- long ret, timeout = 0;
+ long ret;
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
@@ -901,51 +900,19 @@
if (copy_from_user(&s32, uthese, sizeof(compat_sigset_t)))
return -EFAULT;
sigset_from_compat(&s, &s32);
- sigdelsetmask(&s,sigmask(SIGKILL)|sigmask(SIGSTOP));
- signotset(&s);
if (uts) {
- if (get_compat_timespec (&t, uts))
+ if (get_compat_timespec(&t, uts))
return -EFAULT;
- if (t.tv_nsec >= 1000000000L || t.tv_nsec < 0
- || t.tv_sec < 0)
- return -EINVAL;
}
- spin_lock_irq(¤t->sighand->siglock);
- sig = dequeue_signal(current, &s, &info);
- if (!sig) {
- timeout = MAX_SCHEDULE_TIMEOUT;
- if (uts)
- timeout = timespec_to_jiffies(&t)
- +(t.tv_sec || t.tv_nsec);
- if (timeout) {
- current->real_blocked = current->blocked;
- sigandsets(¤t->blocked, ¤t->blocked, &s);
+ ret = do_sigtimedwait(&s, &info, uts ? &t : NULL);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- timeout = schedule_timeout_interruptible(timeout);
-
- spin_lock_irq(¤t->sighand->siglock);
- sig = dequeue_signal(current, &s, &info);
- current->blocked = current->real_blocked;
- siginitset(¤t->real_blocked, 0);
- recalc_sigpending();
- }
+ if (ret > 0 && uinfo) {
+ if (copy_siginfo_to_user32(uinfo, &info))
+ ret = -EFAULT;
}
- spin_unlock_irq(¤t->sighand->siglock);
- if (sig) {
- ret = sig;
- if (uinfo) {
- if (copy_siginfo_to_user32(uinfo, &info))
- ret = -EFAULT;
- }
- }else {
- ret = timeout?-EINTR:-EAGAIN;
- }
return ret;
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 33eee16..2bb8c2e 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1159,7 +1159,7 @@
static int update_relax_domain_level(struct cpuset *cs, s64 val)
{
#ifdef CONFIG_SMP
- if (val < -1 || val >= SD_LV_MAX)
+ if (val < -1 || val >= sched_domain_level_max)
return -EINVAL;
#endif
diff --git a/kernel/cred.c b/kernel/cred.c
index 5557b55..8093c16 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -54,6 +54,7 @@
.cap_effective = CAP_INIT_EFF_SET,
.cap_bset = CAP_INIT_BSET,
.user = INIT_USER,
+ .user_ns = &init_user_ns,
.group_info = &init_groups,
#ifdef CONFIG_KEYS
.tgcred = &init_tgcred,
@@ -410,6 +411,11 @@
goto error_put;
}
+ /* cache user_ns in cred. Doesn't need a refcount because it will
+ * stay pinned by cred->user
+ */
+ new->user_ns = new->user->user_ns;
+
#ifdef CONFIG_KEYS
/* new threads get their own thread keyrings if their parent already
* had one */
@@ -741,12 +747,6 @@
}
EXPORT_SYMBOL(set_create_files_as);
-struct user_namespace *current_user_ns(void)
-{
- return _current_user_ns();
-}
-EXPORT_SYMBOL(current_user_ns);
-
#ifdef CONFIG_DEBUG_CREDENTIALS
bool creds_are_invalid(const struct cred *cred)
diff --git a/kernel/events/Makefile b/kernel/events/Makefile
new file mode 100644
index 0000000..1ce23d3
--- /dev/null
+++ b/kernel/events/Makefile
@@ -0,0 +1,6 @@
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_core.o = -pg
+endif
+
+obj-y := core.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
diff --git a/kernel/perf_event.c b/kernel/events/core.c
similarity index 98%
rename from kernel/perf_event.c
rename to kernel/events/core.c
index 8e81a98..c09767f 100644
--- a/kernel/perf_event.c
+++ b/kernel/events/core.c
@@ -2,8 +2,8 @@
* Performance events core code:
*
* Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar
+ * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
* Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
*
* For licensing details see kernel-base/COPYING
@@ -39,10 +39,10 @@
#include <asm/irq_regs.h>
struct remote_function_call {
- struct task_struct *p;
- int (*func)(void *info);
- void *info;
- int ret;
+ struct task_struct *p;
+ int (*func)(void *info);
+ void *info;
+ int ret;
};
static void remote_function(void *data)
@@ -76,10 +76,10 @@
task_function_call(struct task_struct *p, int (*func) (void *info), void *info)
{
struct remote_function_call data = {
- .p = p,
- .func = func,
- .info = info,
- .ret = -ESRCH, /* No such (running) process */
+ .p = p,
+ .func = func,
+ .info = info,
+ .ret = -ESRCH, /* No such (running) process */
};
if (task_curr(p))
@@ -100,10 +100,10 @@
static int cpu_function_call(int cpu, int (*func) (void *info), void *info)
{
struct remote_function_call data = {
- .p = NULL,
- .func = func,
- .info = info,
- .ret = -ENXIO, /* No such CPU */
+ .p = NULL,
+ .func = func,
+ .info = info,
+ .ret = -ENXIO, /* No such CPU */
};
smp_call_function_single(cpu, remote_function, &data, 1);
@@ -125,7 +125,7 @@
* perf_sched_events : >0 events exist
* perf_cgroup_events: >0 per-cpu cgroup events exist on this cpu
*/
-atomic_t perf_sched_events __read_mostly;
+struct jump_label_key perf_sched_events __read_mostly;
static DEFINE_PER_CPU(atomic_t, perf_cgroup_events);
static atomic_t nr_mmap_events __read_mostly;
@@ -586,14 +586,6 @@
WARN_ON(!atomic_inc_not_zero(&ctx->refcount));
}
-static void free_ctx(struct rcu_head *head)
-{
- struct perf_event_context *ctx;
-
- ctx = container_of(head, struct perf_event_context, rcu_head);
- kfree(ctx);
-}
-
static void put_ctx(struct perf_event_context *ctx)
{
if (atomic_dec_and_test(&ctx->refcount)) {
@@ -601,7 +593,7 @@
put_ctx(ctx->parent_ctx);
if (ctx->task)
put_task_struct(ctx->task);
- call_rcu(&ctx->rcu_head, free_ctx);
+ kfree_rcu(ctx, rcu_head);
}
}
@@ -5331,14 +5323,6 @@
lockdep_is_held(&swhash->hlist_mutex));
}
-static void swevent_hlist_release_rcu(struct rcu_head *rcu_head)
-{
- struct swevent_hlist *hlist;
-
- hlist = container_of(rcu_head, struct swevent_hlist, rcu_head);
- kfree(hlist);
-}
-
static void swevent_hlist_release(struct swevent_htable *swhash)
{
struct swevent_hlist *hlist = swevent_hlist_deref(swhash);
@@ -5347,7 +5331,7 @@
return;
rcu_assign_pointer(swhash->swevent_hlist, NULL);
- call_rcu(&hlist->rcu_head, swevent_hlist_release_rcu);
+ kfree_rcu(hlist, rcu_head);
}
static void swevent_hlist_put_cpu(struct perf_event *event, int cpu)
@@ -5429,7 +5413,7 @@
return err;
}
-atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
+struct jump_label_key perf_swevent_enabled[PERF_COUNT_SW_MAX];
static void sw_perf_event_destroy(struct perf_event *event)
{
@@ -7445,11 +7429,11 @@
}
struct cgroup_subsys perf_subsys = {
- .name = "perf_event",
- .subsys_id = perf_subsys_id,
- .create = perf_cgroup_create,
- .destroy = perf_cgroup_destroy,
- .exit = perf_cgroup_exit,
- .attach = perf_cgroup_attach,
+ .name = "perf_event",
+ .subsys_id = perf_subsys_id,
+ .create = perf_cgroup_create,
+ .destroy = perf_cgroup_destroy,
+ .exit = perf_cgroup_exit,
+ .attach = perf_cgroup_attach,
};
#endif /* CONFIG_CGROUP_PERF */
diff --git a/kernel/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
similarity index 100%
rename from kernel/hw_breakpoint.c
rename to kernel/events/hw_breakpoint.c
diff --git a/kernel/exit.c b/kernel/exit.c
index f5d2f63..20a4064 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1016,7 +1016,7 @@
/*
* FIXME: do that only when needed, using sched_exit tracepoint
*/
- flush_ptrace_hw_breakpoint(tsk);
+ ptrace_put_breakpoints(tsk);
exit_notify(tsk, group_dead);
#ifdef CONFIG_NUMA
@@ -1377,11 +1377,23 @@
return NULL;
}
-/*
- * Handle sys_wait4 work for one task in state TASK_STOPPED. We hold
- * read_lock(&tasklist_lock) on entry. If we return zero, we still hold
- * the lock and this task is uninteresting. If we return nonzero, we have
- * released the lock and the system call should return.
+/**
+ * wait_task_stopped - Wait for %TASK_STOPPED or %TASK_TRACED
+ * @wo: wait options
+ * @ptrace: is the wait for ptrace
+ * @p: task to wait for
+ *
+ * Handle sys_wait4() work for %p in state %TASK_STOPPED or %TASK_TRACED.
+ *
+ * CONTEXT:
+ * read_lock(&tasklist_lock), which is released if return value is
+ * non-zero. Also, grabs and releases @p->sighand->siglock.
+ *
+ * RETURNS:
+ * 0 if wait condition didn't exist and search for other wait conditions
+ * should continue. Non-zero return, -errno on failure and @p's pid on
+ * success, implies that tasklist_lock is released and wait condition
+ * search should terminate.
*/
static int wait_task_stopped(struct wait_opts *wo,
int ptrace, struct task_struct *p)
@@ -1397,6 +1409,9 @@
if (!ptrace && !(wo->wo_flags & WUNTRACED))
return 0;
+ if (!task_stopped_code(p, ptrace))
+ return 0;
+
exit_code = 0;
spin_lock_irq(&p->sighand->siglock);
@@ -1538,33 +1553,84 @@
return 0;
}
- if (likely(!ptrace) && unlikely(task_ptrace(p))) {
- /*
- * This child is hidden by ptrace.
- * We aren't allowed to see it now, but eventually we will.
- */
- wo->notask_error = 0;
- return 0;
- }
-
+ /* dead body doesn't have much to contribute */
if (p->exit_state == EXIT_DEAD)
return 0;
- /*
- * We don't reap group leaders with subthreads.
- */
- if (p->exit_state == EXIT_ZOMBIE && !delay_group_leader(p))
- return wait_task_zombie(wo, p);
+ /* slay zombie? */
+ if (p->exit_state == EXIT_ZOMBIE) {
+ /*
+ * A zombie ptracee is only visible to its ptracer.
+ * Notification and reaping will be cascaded to the real
+ * parent when the ptracer detaches.
+ */
+ if (likely(!ptrace) && unlikely(task_ptrace(p))) {
+ /* it will become visible, clear notask_error */
+ wo->notask_error = 0;
+ return 0;
+ }
+
+ /* we don't reap group leaders with subthreads */
+ if (!delay_group_leader(p))
+ return wait_task_zombie(wo, p);
+
+ /*
+ * Allow access to stopped/continued state via zombie by
+ * falling through. Clearing of notask_error is complex.
+ *
+ * When !@ptrace:
+ *
+ * If WEXITED is set, notask_error should naturally be
+ * cleared. If not, subset of WSTOPPED|WCONTINUED is set,
+ * so, if there are live subthreads, there are events to
+ * wait for. If all subthreads are dead, it's still safe
+ * to clear - this function will be called again in finite
+ * amount time once all the subthreads are released and
+ * will then return without clearing.
+ *
+ * When @ptrace:
+ *
+ * Stopped state is per-task and thus can't change once the
+ * target task dies. Only continued and exited can happen.
+ * Clear notask_error if WCONTINUED | WEXITED.
+ */
+ if (likely(!ptrace) || (wo->wo_flags & (WCONTINUED | WEXITED)))
+ wo->notask_error = 0;
+ } else {
+ /*
+ * If @p is ptraced by a task in its real parent's group,
+ * hide group stop/continued state when looking at @p as
+ * the real parent; otherwise, a single stop can be
+ * reported twice as group and ptrace stops.
+ *
+ * If a ptracer wants to distinguish the two events for its
+ * own children, it should create a separate process which
+ * takes the role of real parent.
+ */
+ if (likely(!ptrace) && task_ptrace(p) &&
+ same_thread_group(p->parent, p->real_parent))
+ return 0;
+
+ /*
+ * @p is alive and it's gonna stop, continue or exit, so
+ * there always is something to wait for.
+ */
+ wo->notask_error = 0;
+ }
/*
- * It's stopped or running now, so it might
- * later continue, exit, or stop again.
+ * Wait for stopped. Depending on @ptrace, different stopped state
+ * is used and the two don't interact with each other.
*/
- wo->notask_error = 0;
+ ret = wait_task_stopped(wo, ptrace, p);
+ if (ret)
+ return ret;
- if (task_stopped_code(p, ptrace))
- return wait_task_stopped(wo, ptrace, p);
-
+ /*
+ * Wait for continued. There's only one continued state and the
+ * ptracer can consume it which can confuse the real parent. Don't
+ * use WCONTINUED from ptracer. You don't need or want it.
+ */
return wait_task_continued(wo, p);
}
diff --git a/kernel/extable.c b/kernel/extable.c
index 7f8f263..5339705 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -72,6 +72,24 @@
return 0;
}
+/**
+ * core_kernel_data - tell if addr points to kernel data
+ * @addr: address to test
+ *
+ * Returns true if @addr passed in is from the core kernel data
+ * section.
+ *
+ * Note: On some archs it may return true for core RODATA, and false
+ * for others. But will always be true for core RW data.
+ */
+int core_kernel_data(unsigned long addr)
+{
+ if (addr >= (unsigned long)_sdata &&
+ addr < (unsigned long)_edata)
+ return 1;
+ return 0;
+}
+
int __kernel_text_address(unsigned long addr)
{
if (core_kernel_text(addr))
diff --git a/kernel/fork.c b/kernel/fork.c
index e7548de..2b44d82 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1103,7 +1103,6 @@
posix_cpu_timers_init(p);
- p->lock_depth = -1; /* -1 = no lock */
do_posix_clock_monotonic_gettime(&p->start_time);
p->real_start_time = p->start_time;
monotonic_to_bootbased(&p->real_start_time);
@@ -1153,7 +1152,7 @@
#endif
/* Perform scheduler related setup. Assign this task to a CPU. */
- sched_fork(p, clone_flags);
+ sched_fork(p);
retval = perf_event_init_task(p);
if (retval)
@@ -1464,7 +1463,7 @@
*/
p->flags &= ~PF_STARTING;
- wake_up_new_task(p, clone_flags);
+ wake_up_new_task(p);
tracehook_report_clone_complete(trace, regs,
clone_flags, nr, p);
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 66ecd2e..7b01de98 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -17,7 +17,7 @@
{
if (!unlikely(current->flags & PF_NOFREEZE)) {
current->flags |= PF_FROZEN;
- wmb();
+ smp_wmb();
}
clear_freeze_flag(current);
}
@@ -93,7 +93,7 @@
* the task as frozen and next clears its TIF_FREEZE.
*/
if (!freezing(p)) {
- rmb();
+ smp_rmb();
if (frozen(p))
return false;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 87fdb3f..dbbbf7d 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -81,7 +81,7 @@
}
};
-static int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
+static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
[CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
[CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
[CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index 53ead17..ea640120 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -33,7 +33,7 @@
/*
* Zero means infinite timeout - no checking done:
*/
-unsigned long __read_mostly sysctl_hung_task_timeout_secs = 120;
+unsigned long __read_mostly sysctl_hung_task_timeout_secs = CONFIG_DEFAULT_HUNG_TASK_TIMEOUT;
unsigned long __read_mostly sysctl_hung_task_warnings = 10;
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index c574f9a..d1d051b3 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -48,6 +48,10 @@
config IRQ_EDGE_EOI_HANDLER
bool
+# Generic configurable interrupt chip implementation
+config GENERIC_IRQ_CHIP
+ bool
+
# Support forced irq threading
config IRQ_FORCED_THREADING
bool
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
index 54329cd..7329005 100644
--- a/kernel/irq/Makefile
+++ b/kernel/irq/Makefile
@@ -1,5 +1,6 @@
obj-y := irqdesc.o handle.o manage.o spurious.o resend.o chip.o dummychip.o devres.o
+obj-$(CONFIG_GENERIC_IRQ_CHIP) += generic-chip.o
obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 4af1e2b..d5a3009 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -310,6 +310,7 @@
out_unlock:
raw_spin_unlock(&desc->lock);
}
+EXPORT_SYMBOL_GPL(handle_simple_irq);
/**
* handle_level_irq - Level type irq handler
@@ -573,6 +574,7 @@
if (handle != handle_bad_irq && is_chained) {
irq_settings_set_noprobe(desc);
irq_settings_set_norequest(desc);
+ irq_settings_set_nothread(desc);
irq_startup(desc);
}
out:
@@ -612,6 +614,7 @@
irq_put_desc_unlock(desc, flags);
}
+EXPORT_SYMBOL_GPL(irq_modify_status);
/**
* irq_cpu_online - Invoke all irq_cpu_online functions.
diff --git a/kernel/irq/debug.h b/kernel/irq/debug.h
index 306cba3..97a8bfa 100644
--- a/kernel/irq/debug.h
+++ b/kernel/irq/debug.h
@@ -27,6 +27,7 @@
P(IRQ_PER_CPU);
P(IRQ_NOPROBE);
P(IRQ_NOREQUEST);
+ P(IRQ_NOTHREAD);
P(IRQ_NOAUTOEN);
PS(IRQS_AUTODETECT);
diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c
new file mode 100644
index 0000000..31a9db7
--- /dev/null
+++ b/kernel/irq/generic-chip.c
@@ -0,0 +1,354 @@
+/*
+ * Library implementing the most common irq chip callback functions
+ *
+ * Copyright (C) 2011, Thomas Gleixner
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/syscore_ops.h>
+
+#include "internals.h"
+
+static LIST_HEAD(gc_list);
+static DEFINE_RAW_SPINLOCK(gc_lock);
+
+static inline struct irq_chip_regs *cur_regs(struct irq_data *d)
+{
+ return &container_of(d->chip, struct irq_chip_type, chip)->regs;
+}
+
+/**
+ * irq_gc_noop - NOOP function
+ * @d: irq_data
+ */
+void irq_gc_noop(struct irq_data *d)
+{
+}
+
+/**
+ * irq_gc_mask_disable_reg - Mask chip via disable register
+ * @d: irq_data
+ *
+ * Chip has separate enable/disable registers instead of a single mask
+ * register.
+ */
+void irq_gc_mask_disable_reg(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->disable);
+ gc->mask_cache &= ~mask;
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_mask_set_mask_bit - Mask chip via setting bit in mask register
+ * @d: irq_data
+ *
+ * Chip has a single mask register. Values of this register are cached
+ * and protected by gc->lock
+ */
+void irq_gc_mask_set_bit(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ gc->mask_cache |= mask;
+ irq_reg_writel(gc->mask_cache, gc->reg_base + cur_regs(d)->mask);
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_mask_set_mask_bit - Mask chip via clearing bit in mask register
+ * @d: irq_data
+ *
+ * Chip has a single mask register. Values of this register are cached
+ * and protected by gc->lock
+ */
+void irq_gc_mask_clr_bit(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ gc->mask_cache &= ~mask;
+ irq_reg_writel(gc->mask_cache, gc->reg_base + cur_regs(d)->mask);
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_unmask_enable_reg - Unmask chip via enable register
+ * @d: irq_data
+ *
+ * Chip has separate enable/disable registers instead of a single mask
+ * register.
+ */
+void irq_gc_unmask_enable_reg(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->enable);
+ gc->mask_cache |= mask;
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_ack - Ack pending interrupt
+ * @d: irq_data
+ */
+void irq_gc_ack(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->ack);
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_mask_disable_reg_and_ack- Mask and ack pending interrupt
+ * @d: irq_data
+ */
+void irq_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->mask);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->ack);
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_eoi - EOI interrupt
+ * @d: irq_data
+ */
+void irq_gc_eoi(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->eoi);
+ irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_set_wake - Set/clr wake bit for an interrupt
+ * @d: irq_data
+ *
+ * For chips where the wake from suspend functionality is not
+ * configured in a separate register and the wakeup active state is
+ * just stored in a bitmask.
+ */
+int irq_gc_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ if (!(mask & gc->wake_enabled))
+ return -EINVAL;
+
+ irq_gc_lock(gc);
+ if (on)
+ gc->wake_active |= mask;
+ else
+ gc->wake_active &= ~mask;
+ irq_gc_unlock(gc);
+ return 0;
+}
+
+/**
+ * irq_alloc_generic_chip - Allocate a generic chip and initialize it
+ * @name: Name of the irq chip
+ * @num_ct: Number of irq_chip_type instances associated with this
+ * @irq_base: Interrupt base nr for this chip
+ * @reg_base: Register base address (virtual)
+ * @handler: Default flow handler associated with this chip
+ *
+ * Returns an initialized irq_chip_generic structure. The chip defaults
+ * to the primary (index 0) irq_chip_type and @handler
+ */
+struct irq_chip_generic *
+irq_alloc_generic_chip(const char *name, int num_ct, unsigned int irq_base,
+ void __iomem *reg_base, irq_flow_handler_t handler)
+{
+ struct irq_chip_generic *gc;
+ unsigned long sz = sizeof(*gc) + num_ct * sizeof(struct irq_chip_type);
+
+ gc = kzalloc(sz, GFP_KERNEL);
+ if (gc) {
+ raw_spin_lock_init(&gc->lock);
+ gc->num_ct = num_ct;
+ gc->irq_base = irq_base;
+ gc->reg_base = reg_base;
+ gc->chip_types->chip.name = name;
+ gc->chip_types->handler = handler;
+ }
+ return gc;
+}
+
+/*
+ * Separate lockdep class for interrupt chip which can nest irq_desc
+ * lock.
+ */
+static struct lock_class_key irq_nested_lock_class;
+
+/**
+ * irq_setup_generic_chip - Setup a range of interrupts with a generic chip
+ * @gc: Generic irq chip holding all data
+ * @msk: Bitmask holding the irqs to initialize relative to gc->irq_base
+ * @flags: Flags for initialization
+ * @clr: IRQ_* bits to clear
+ * @set: IRQ_* bits to set
+ *
+ * Set up max. 32 interrupts starting from gc->irq_base. Note, this
+ * initializes all interrupts to the primary irq_chip_type and its
+ * associated handler.
+ */
+void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
+ enum irq_gc_flags flags, unsigned int clr,
+ unsigned int set)
+{
+ struct irq_chip_type *ct = gc->chip_types;
+ unsigned int i;
+
+ raw_spin_lock(&gc_lock);
+ list_add_tail(&gc->list, &gc_list);
+ raw_spin_unlock(&gc_lock);
+
+ /* Init mask cache ? */
+ if (flags & IRQ_GC_INIT_MASK_CACHE)
+ gc->mask_cache = irq_reg_readl(gc->reg_base + ct->regs.mask);
+
+ for (i = gc->irq_base; msk; msk >>= 1, i++) {
+ if (!msk & 0x01)
+ continue;
+
+ if (flags & IRQ_GC_INIT_NESTED_LOCK)
+ irq_set_lockdep_class(i, &irq_nested_lock_class);
+
+ irq_set_chip_and_handler(i, &ct->chip, ct->handler);
+ irq_set_chip_data(i, gc);
+ irq_modify_status(i, clr, set);
+ }
+ gc->irq_cnt = i - gc->irq_base;
+}
+
+/**
+ * irq_setup_alt_chip - Switch to alternative chip
+ * @d: irq_data for this interrupt
+ * @type Flow type to be initialized
+ *
+ * Only to be called from chip->irq_set_type() callbacks.
+ */
+int irq_setup_alt_chip(struct irq_data *d, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ unsigned int i;
+
+ for (i = 0; i < gc->num_ct; i++, ct++) {
+ if (ct->type & type) {
+ d->chip = &ct->chip;
+ irq_data_to_desc(d)->handle_irq = ct->handler;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+/**
+ * irq_remove_generic_chip - Remove a chip
+ * @gc: Generic irq chip holding all data
+ * @msk: Bitmask holding the irqs to initialize relative to gc->irq_base
+ * @clr: IRQ_* bits to clear
+ * @set: IRQ_* bits to set
+ *
+ * Remove up to 32 interrupts starting from gc->irq_base.
+ */
+void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
+ unsigned int clr, unsigned int set)
+{
+ unsigned int i = gc->irq_base;
+
+ raw_spin_lock(&gc_lock);
+ list_del(&gc->list);
+ raw_spin_unlock(&gc_lock);
+
+ for (; msk; msk >>= 1, i++) {
+ if (!msk & 0x01)
+ continue;
+
+ /* Remove handler first. That will mask the irq line */
+ irq_set_handler(i, NULL);
+ irq_set_chip(i, &no_irq_chip);
+ irq_set_chip_data(i, NULL);
+ irq_modify_status(i, clr, set);
+ }
+}
+
+#ifdef CONFIG_PM
+static int irq_gc_suspend(void)
+{
+ struct irq_chip_generic *gc;
+
+ list_for_each_entry(gc, &gc_list, list) {
+ struct irq_chip_type *ct = gc->chip_types;
+
+ if (ct->chip.irq_suspend)
+ ct->chip.irq_suspend(irq_get_irq_data(gc->irq_base));
+ }
+ return 0;
+}
+
+static void irq_gc_resume(void)
+{
+ struct irq_chip_generic *gc;
+
+ list_for_each_entry(gc, &gc_list, list) {
+ struct irq_chip_type *ct = gc->chip_types;
+
+ if (ct->chip.irq_resume)
+ ct->chip.irq_resume(irq_get_irq_data(gc->irq_base));
+ }
+}
+#else
+#define irq_gc_suspend NULL
+#define irq_gc_resume NULL
+#endif
+
+static void irq_gc_shutdown(void)
+{
+ struct irq_chip_generic *gc;
+
+ list_for_each_entry(gc, &gc_list, list) {
+ struct irq_chip_type *ct = gc->chip_types;
+
+ if (ct->chip.irq_pm_shutdown)
+ ct->chip.irq_pm_shutdown(irq_get_irq_data(gc->irq_base));
+ }
+}
+
+static struct syscore_ops irq_gc_syscore_ops = {
+ .suspend = irq_gc_suspend,
+ .resume = irq_gc_resume,
+ .shutdown = irq_gc_shutdown,
+};
+
+static int __init irq_gc_init_ops(void)
+{
+ register_syscore_ops(&irq_gc_syscore_ops);
+ return 0;
+}
+device_initcall(irq_gc_init_ops);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 2c039c9..886e803 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -22,7 +22,7 @@
*/
static struct lock_class_key irq_desc_lock_class;
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+#if defined(CONFIG_SMP)
static void __init init_irq_default_affinity(void)
{
alloc_cpumask_var(&irq_default_affinity, GFP_NOWAIT);
@@ -290,6 +290,22 @@
#endif /* !CONFIG_SPARSE_IRQ */
+/**
+ * generic_handle_irq - Invoke the handler for a particular irq
+ * @irq: The irq number to handle
+ *
+ */
+int generic_handle_irq(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return -EINVAL;
+ generic_handle_irq_desc(irq, desc);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(generic_handle_irq);
+
/* Dynamic interrupt handling */
/**
@@ -311,6 +327,7 @@
bitmap_clear(allocated_irqs, from, cnt);
mutex_unlock(&sparse_irq_lock);
}
+EXPORT_SYMBOL_GPL(irq_free_descs);
/**
* irq_alloc_descs - allocate and initialize a range of irq descriptors
@@ -351,6 +368,7 @@
mutex_unlock(&sparse_irq_lock);
return ret;
}
+EXPORT_SYMBOL_GPL(irq_alloc_descs);
/**
* irq_reserve_irqs - mark irqs allocated
@@ -430,7 +448,6 @@
*per_cpu_ptr(desc->kstat_irqs, cpu) : 0;
}
-#ifdef CONFIG_GENERIC_HARDIRQS
unsigned int kstat_irqs(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
@@ -443,4 +460,3 @@
sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
return sum;
}
-#endif /* CONFIG_GENERIC_HARDIRQS */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 07c1611..f7ce002 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -900,7 +900,8 @@
*/
new->handler = irq_nested_primary_handler;
} else {
- irq_setup_forced_threading(new);
+ if (irq_settings_can_thread(desc))
+ irq_setup_forced_threading(new);
}
/*
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index dd201bd..834899f 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -419,7 +419,7 @@
} else {
seq_printf(p, " %8s", "None");
}
-#ifdef CONFIG_GENIRC_IRQ_SHOW_LEVEL
+#ifdef CONFIG_GENERIC_IRQ_SHOW_LEVEL
seq_printf(p, " %-8s", irqd_is_level_type(&desc->irq_data) ? "Level" : "Edge");
#endif
if (desc->name)
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index 0d91730..f166783 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -8,6 +8,7 @@
_IRQ_LEVEL = IRQ_LEVEL,
_IRQ_NOPROBE = IRQ_NOPROBE,
_IRQ_NOREQUEST = IRQ_NOREQUEST,
+ _IRQ_NOTHREAD = IRQ_NOTHREAD,
_IRQ_NOAUTOEN = IRQ_NOAUTOEN,
_IRQ_MOVE_PCNTXT = IRQ_MOVE_PCNTXT,
_IRQ_NO_BALANCING = IRQ_NO_BALANCING,
@@ -20,6 +21,7 @@
#define IRQ_LEVEL GOT_YOU_MORON
#define IRQ_NOPROBE GOT_YOU_MORON
#define IRQ_NOREQUEST GOT_YOU_MORON
+#define IRQ_NOTHREAD GOT_YOU_MORON
#define IRQ_NOAUTOEN GOT_YOU_MORON
#define IRQ_NESTED_THREAD GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
@@ -94,6 +96,21 @@
desc->status_use_accessors |= _IRQ_NOREQUEST;
}
+static inline bool irq_settings_can_thread(struct irq_desc *desc)
+{
+ return !(desc->status_use_accessors & _IRQ_NOTHREAD);
+}
+
+static inline void irq_settings_clr_nothread(struct irq_desc *desc)
+{
+ desc->status_use_accessors &= ~_IRQ_NOTHREAD;
+}
+
+static inline void irq_settings_set_nothread(struct irq_desc *desc)
+{
+ desc->status_use_accessors |= _IRQ_NOTHREAD;
+}
+
static inline bool irq_settings_can_probe(struct irq_desc *desc)
{
return !(desc->status_use_accessors & _IRQ_NOPROBE);
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 3b79bd9..74d1c09 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -2,43 +2,23 @@
* jump label support
*
* Copyright (C) 2009 Jason Baron <jbaron@redhat.com>
+ * Copyright (C) 2011 Peter Zijlstra <pzijlstr@redhat.com>
*
*/
-#include <linux/jump_label.h>
#include <linux/memory.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/list.h>
-#include <linux/jhash.h>
#include <linux/slab.h>
#include <linux/sort.h>
#include <linux/err.h>
+#include <linux/jump_label.h>
#ifdef HAVE_JUMP_LABEL
-#define JUMP_LABEL_HASH_BITS 6
-#define JUMP_LABEL_TABLE_SIZE (1 << JUMP_LABEL_HASH_BITS)
-static struct hlist_head jump_label_table[JUMP_LABEL_TABLE_SIZE];
-
/* mutex to protect coming/going of the the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
-struct jump_label_entry {
- struct hlist_node hlist;
- struct jump_entry *table;
- int nr_entries;
- /* hang modules off here */
- struct hlist_head modules;
- unsigned long key;
-};
-
-struct jump_label_module_entry {
- struct hlist_node hlist;
- struct jump_entry *table;
- int nr_entries;
- struct module *mod;
-};
-
void jump_label_lock(void)
{
mutex_lock(&jump_label_mutex);
@@ -49,6 +29,11 @@
mutex_unlock(&jump_label_mutex);
}
+bool jump_label_enabled(struct jump_label_key *key)
+{
+ return !!atomic_read(&key->enabled);
+}
+
static int jump_label_cmp(const void *a, const void *b)
{
const struct jump_entry *jea = a;
@@ -64,7 +49,7 @@
}
static void
-sort_jump_label_entries(struct jump_entry *start, struct jump_entry *stop)
+jump_label_sort_entries(struct jump_entry *start, struct jump_entry *stop)
{
unsigned long size;
@@ -73,118 +58,25 @@
sort(start, size, sizeof(struct jump_entry), jump_label_cmp, NULL);
}
-static struct jump_label_entry *get_jump_label_entry(jump_label_t key)
+static void jump_label_update(struct jump_label_key *key, int enable);
+
+void jump_label_inc(struct jump_label_key *key)
{
- struct hlist_head *head;
- struct hlist_node *node;
- struct jump_label_entry *e;
- u32 hash = jhash((void *)&key, sizeof(jump_label_t), 0);
-
- head = &jump_label_table[hash & (JUMP_LABEL_TABLE_SIZE - 1)];
- hlist_for_each_entry(e, node, head, hlist) {
- if (key == e->key)
- return e;
- }
- return NULL;
-}
-
-static struct jump_label_entry *
-add_jump_label_entry(jump_label_t key, int nr_entries, struct jump_entry *table)
-{
- struct hlist_head *head;
- struct jump_label_entry *e;
- u32 hash;
-
- e = get_jump_label_entry(key);
- if (e)
- return ERR_PTR(-EEXIST);
-
- e = kmalloc(sizeof(struct jump_label_entry), GFP_KERNEL);
- if (!e)
- return ERR_PTR(-ENOMEM);
-
- hash = jhash((void *)&key, sizeof(jump_label_t), 0);
- head = &jump_label_table[hash & (JUMP_LABEL_TABLE_SIZE - 1)];
- e->key = key;
- e->table = table;
- e->nr_entries = nr_entries;
- INIT_HLIST_HEAD(&(e->modules));
- hlist_add_head(&e->hlist, head);
- return e;
-}
-
-static int
-build_jump_label_hashtable(struct jump_entry *start, struct jump_entry *stop)
-{
- struct jump_entry *iter, *iter_begin;
- struct jump_label_entry *entry;
- int count;
-
- sort_jump_label_entries(start, stop);
- iter = start;
- while (iter < stop) {
- entry = get_jump_label_entry(iter->key);
- if (!entry) {
- iter_begin = iter;
- count = 0;
- while ((iter < stop) &&
- (iter->key == iter_begin->key)) {
- iter++;
- count++;
- }
- entry = add_jump_label_entry(iter_begin->key,
- count, iter_begin);
- if (IS_ERR(entry))
- return PTR_ERR(entry);
- } else {
- WARN_ONCE(1, KERN_ERR "build_jump_hashtable: unexpected entry!\n");
- return -1;
- }
- }
- return 0;
-}
-
-/***
- * jump_label_update - update jump label text
- * @key - key value associated with a a jump label
- * @type - enum set to JUMP_LABEL_ENABLE or JUMP_LABEL_DISABLE
- *
- * Will enable/disable the jump for jump label @key, depending on the
- * value of @type.
- *
- */
-
-void jump_label_update(unsigned long key, enum jump_label_type type)
-{
- struct jump_entry *iter;
- struct jump_label_entry *entry;
- struct hlist_node *module_node;
- struct jump_label_module_entry *e_module;
- int count;
+ if (atomic_inc_not_zero(&key->enabled))
+ return;
jump_label_lock();
- entry = get_jump_label_entry((jump_label_t)key);
- if (entry) {
- count = entry->nr_entries;
- iter = entry->table;
- while (count--) {
- if (kernel_text_address(iter->code))
- arch_jump_label_transform(iter, type);
- iter++;
- }
- /* eanble/disable jump labels in modules */
- hlist_for_each_entry(e_module, module_node, &(entry->modules),
- hlist) {
- count = e_module->nr_entries;
- iter = e_module->table;
- while (count--) {
- if (iter->key &&
- kernel_text_address(iter->code))
- arch_jump_label_transform(iter, type);
- iter++;
- }
- }
- }
+ if (atomic_add_return(1, &key->enabled) == 1)
+ jump_label_update(key, JUMP_LABEL_ENABLE);
+ jump_label_unlock();
+}
+
+void jump_label_dec(struct jump_label_key *key)
+{
+ if (!atomic_dec_and_mutex_lock(&key->enabled, &jump_label_mutex))
+ return;
+
+ jump_label_update(key, JUMP_LABEL_DISABLE);
jump_label_unlock();
}
@@ -197,41 +89,254 @@
return 0;
}
-#ifdef CONFIG_MODULES
-
-static int module_conflict(void *start, void *end)
+static int __jump_label_text_reserved(struct jump_entry *iter_start,
+ struct jump_entry *iter_stop, void *start, void *end)
{
- struct hlist_head *head;
- struct hlist_node *node, *node_next, *module_node, *module_node_next;
- struct jump_label_entry *e;
- struct jump_label_module_entry *e_module;
struct jump_entry *iter;
- int i, count;
- int conflict = 0;
- for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
- head = &jump_label_table[i];
- hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
- hlist_for_each_entry_safe(e_module, module_node,
- module_node_next,
- &(e->modules), hlist) {
- count = e_module->nr_entries;
- iter = e_module->table;
- while (count--) {
- if (addr_conflict(iter, start, end)) {
- conflict = 1;
- goto out;
- }
- iter++;
- }
- }
- }
+ iter = iter_start;
+ while (iter < iter_stop) {
+ if (addr_conflict(iter, start, end))
+ return 1;
+ iter++;
}
-out:
- return conflict;
+
+ return 0;
}
+static void __jump_label_update(struct jump_label_key *key,
+ struct jump_entry *entry, int enable)
+{
+ for (; entry->key == (jump_label_t)(unsigned long)key; entry++) {
+ /*
+ * entry->code set to 0 invalidates module init text sections
+ * kernel_text_address() verifies we are not in core kernel
+ * init code, see jump_label_invalidate_module_init().
+ */
+ if (entry->code && kernel_text_address(entry->code))
+ arch_jump_label_transform(entry, enable);
+ }
+}
+
+/*
+ * Not all archs need this.
+ */
+void __weak arch_jump_label_text_poke_early(jump_label_t addr)
+{
+}
+
+static __init int jump_label_init(void)
+{
+ struct jump_entry *iter_start = __start___jump_table;
+ struct jump_entry *iter_stop = __stop___jump_table;
+ struct jump_label_key *key = NULL;
+ struct jump_entry *iter;
+
+ jump_label_lock();
+ jump_label_sort_entries(iter_start, iter_stop);
+
+ for (iter = iter_start; iter < iter_stop; iter++) {
+ arch_jump_label_text_poke_early(iter->code);
+ if (iter->key == (jump_label_t)(unsigned long)key)
+ continue;
+
+ key = (struct jump_label_key *)(unsigned long)iter->key;
+ atomic_set(&key->enabled, 0);
+ key->entries = iter;
+#ifdef CONFIG_MODULES
+ key->next = NULL;
#endif
+ }
+ jump_label_unlock();
+
+ return 0;
+}
+early_initcall(jump_label_init);
+
+#ifdef CONFIG_MODULES
+
+struct jump_label_mod {
+ struct jump_label_mod *next;
+ struct jump_entry *entries;
+ struct module *mod;
+};
+
+static int __jump_label_mod_text_reserved(void *start, void *end)
+{
+ struct module *mod;
+
+ mod = __module_text_address((unsigned long)start);
+ if (!mod)
+ return 0;
+
+ WARN_ON_ONCE(__module_text_address((unsigned long)end) != mod);
+
+ return __jump_label_text_reserved(mod->jump_entries,
+ mod->jump_entries + mod->num_jump_entries,
+ start, end);
+}
+
+static void __jump_label_mod_update(struct jump_label_key *key, int enable)
+{
+ struct jump_label_mod *mod = key->next;
+
+ while (mod) {
+ __jump_label_update(key, mod->entries, enable);
+ mod = mod->next;
+ }
+}
+
+/***
+ * apply_jump_label_nops - patch module jump labels with arch_get_jump_label_nop()
+ * @mod: module to patch
+ *
+ * Allow for run-time selection of the optimal nops. Before the module
+ * loads patch these with arch_get_jump_label_nop(), which is specified by
+ * the arch specific jump label code.
+ */
+void jump_label_apply_nops(struct module *mod)
+{
+ struct jump_entry *iter_start = mod->jump_entries;
+ struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+ struct jump_entry *iter;
+
+ /* if the module doesn't have jump label entries, just return */
+ if (iter_start == iter_stop)
+ return;
+
+ for (iter = iter_start; iter < iter_stop; iter++)
+ arch_jump_label_text_poke_early(iter->code);
+}
+
+static int jump_label_add_module(struct module *mod)
+{
+ struct jump_entry *iter_start = mod->jump_entries;
+ struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+ struct jump_entry *iter;
+ struct jump_label_key *key = NULL;
+ struct jump_label_mod *jlm;
+
+ /* if the module doesn't have jump label entries, just return */
+ if (iter_start == iter_stop)
+ return 0;
+
+ jump_label_sort_entries(iter_start, iter_stop);
+
+ for (iter = iter_start; iter < iter_stop; iter++) {
+ if (iter->key == (jump_label_t)(unsigned long)key)
+ continue;
+
+ key = (struct jump_label_key *)(unsigned long)iter->key;
+
+ if (__module_address(iter->key) == mod) {
+ atomic_set(&key->enabled, 0);
+ key->entries = iter;
+ key->next = NULL;
+ continue;
+ }
+
+ jlm = kzalloc(sizeof(struct jump_label_mod), GFP_KERNEL);
+ if (!jlm)
+ return -ENOMEM;
+
+ jlm->mod = mod;
+ jlm->entries = iter;
+ jlm->next = key->next;
+ key->next = jlm;
+
+ if (jump_label_enabled(key))
+ __jump_label_update(key, iter, JUMP_LABEL_ENABLE);
+ }
+
+ return 0;
+}
+
+static void jump_label_del_module(struct module *mod)
+{
+ struct jump_entry *iter_start = mod->jump_entries;
+ struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+ struct jump_entry *iter;
+ struct jump_label_key *key = NULL;
+ struct jump_label_mod *jlm, **prev;
+
+ for (iter = iter_start; iter < iter_stop; iter++) {
+ if (iter->key == (jump_label_t)(unsigned long)key)
+ continue;
+
+ key = (struct jump_label_key *)(unsigned long)iter->key;
+
+ if (__module_address(iter->key) == mod)
+ continue;
+
+ prev = &key->next;
+ jlm = key->next;
+
+ while (jlm && jlm->mod != mod) {
+ prev = &jlm->next;
+ jlm = jlm->next;
+ }
+
+ if (jlm) {
+ *prev = jlm->next;
+ kfree(jlm);
+ }
+ }
+}
+
+static void jump_label_invalidate_module_init(struct module *mod)
+{
+ struct jump_entry *iter_start = mod->jump_entries;
+ struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+ struct jump_entry *iter;
+
+ for (iter = iter_start; iter < iter_stop; iter++) {
+ if (within_module_init(iter->code, mod))
+ iter->code = 0;
+ }
+}
+
+static int
+jump_label_module_notify(struct notifier_block *self, unsigned long val,
+ void *data)
+{
+ struct module *mod = data;
+ int ret = 0;
+
+ switch (val) {
+ case MODULE_STATE_COMING:
+ jump_label_lock();
+ ret = jump_label_add_module(mod);
+ if (ret)
+ jump_label_del_module(mod);
+ jump_label_unlock();
+ break;
+ case MODULE_STATE_GOING:
+ jump_label_lock();
+ jump_label_del_module(mod);
+ jump_label_unlock();
+ break;
+ case MODULE_STATE_LIVE:
+ jump_label_lock();
+ jump_label_invalidate_module_init(mod);
+ jump_label_unlock();
+ break;
+ }
+
+ return notifier_from_errno(ret);
+}
+
+struct notifier_block jump_label_module_nb = {
+ .notifier_call = jump_label_module_notify,
+ .priority = 1, /* higher than tracepoints */
+};
+
+static __init int jump_label_init_module(void)
+{
+ return register_module_notifier(&jump_label_module_nb);
+}
+early_initcall(jump_label_init_module);
+
+#endif /* CONFIG_MODULES */
/***
* jump_label_text_reserved - check if addr range is reserved
@@ -248,237 +353,29 @@
*/
int jump_label_text_reserved(void *start, void *end)
{
- struct jump_entry *iter;
- struct jump_entry *iter_start = __start___jump_table;
- struct jump_entry *iter_stop = __start___jump_table;
- int conflict = 0;
+ int ret = __jump_label_text_reserved(__start___jump_table,
+ __stop___jump_table, start, end);
- iter = iter_start;
- while (iter < iter_stop) {
- if (addr_conflict(iter, start, end)) {
- conflict = 1;
- goto out;
- }
- iter++;
- }
+ if (ret)
+ return ret;
- /* now check modules */
#ifdef CONFIG_MODULES
- conflict = module_conflict(start, end);
+ ret = __jump_label_mod_text_reserved(start, end);
#endif
-out:
- return conflict;
-}
-
-/*
- * Not all archs need this.
- */
-void __weak arch_jump_label_text_poke_early(jump_label_t addr)
-{
-}
-
-static __init int init_jump_label(void)
-{
- int ret;
- struct jump_entry *iter_start = __start___jump_table;
- struct jump_entry *iter_stop = __stop___jump_table;
- struct jump_entry *iter;
-
- jump_label_lock();
- ret = build_jump_label_hashtable(__start___jump_table,
- __stop___jump_table);
- iter = iter_start;
- while (iter < iter_stop) {
- arch_jump_label_text_poke_early(iter->code);
- iter++;
- }
- jump_label_unlock();
return ret;
}
-early_initcall(init_jump_label);
+
+static void jump_label_update(struct jump_label_key *key, int enable)
+{
+ struct jump_entry *entry = key->entries;
+
+ /* if there are no users, entry can be NULL */
+ if (entry)
+ __jump_label_update(key, entry, enable);
#ifdef CONFIG_MODULES
-
-static struct jump_label_module_entry *
-add_jump_label_module_entry(struct jump_label_entry *entry,
- struct jump_entry *iter_begin,
- int count, struct module *mod)
-{
- struct jump_label_module_entry *e;
-
- e = kmalloc(sizeof(struct jump_label_module_entry), GFP_KERNEL);
- if (!e)
- return ERR_PTR(-ENOMEM);
- e->mod = mod;
- e->nr_entries = count;
- e->table = iter_begin;
- hlist_add_head(&e->hlist, &entry->modules);
- return e;
+ __jump_label_mod_update(key, enable);
+#endif
}
-static int add_jump_label_module(struct module *mod)
-{
- struct jump_entry *iter, *iter_begin;
- struct jump_label_entry *entry;
- struct jump_label_module_entry *module_entry;
- int count;
-
- /* if the module doesn't have jump label entries, just return */
- if (!mod->num_jump_entries)
- return 0;
-
- sort_jump_label_entries(mod->jump_entries,
- mod->jump_entries + mod->num_jump_entries);
- iter = mod->jump_entries;
- while (iter < mod->jump_entries + mod->num_jump_entries) {
- entry = get_jump_label_entry(iter->key);
- iter_begin = iter;
- count = 0;
- while ((iter < mod->jump_entries + mod->num_jump_entries) &&
- (iter->key == iter_begin->key)) {
- iter++;
- count++;
- }
- if (!entry) {
- entry = add_jump_label_entry(iter_begin->key, 0, NULL);
- if (IS_ERR(entry))
- return PTR_ERR(entry);
- }
- module_entry = add_jump_label_module_entry(entry, iter_begin,
- count, mod);
- if (IS_ERR(module_entry))
- return PTR_ERR(module_entry);
- }
- return 0;
-}
-
-static void remove_jump_label_module(struct module *mod)
-{
- struct hlist_head *head;
- struct hlist_node *node, *node_next, *module_node, *module_node_next;
- struct jump_label_entry *e;
- struct jump_label_module_entry *e_module;
- int i;
-
- /* if the module doesn't have jump label entries, just return */
- if (!mod->num_jump_entries)
- return;
-
- for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
- head = &jump_label_table[i];
- hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
- hlist_for_each_entry_safe(e_module, module_node,
- module_node_next,
- &(e->modules), hlist) {
- if (e_module->mod == mod) {
- hlist_del(&e_module->hlist);
- kfree(e_module);
- }
- }
- if (hlist_empty(&e->modules) && (e->nr_entries == 0)) {
- hlist_del(&e->hlist);
- kfree(e);
- }
- }
- }
-}
-
-static void remove_jump_label_module_init(struct module *mod)
-{
- struct hlist_head *head;
- struct hlist_node *node, *node_next, *module_node, *module_node_next;
- struct jump_label_entry *e;
- struct jump_label_module_entry *e_module;
- struct jump_entry *iter;
- int i, count;
-
- /* if the module doesn't have jump label entries, just return */
- if (!mod->num_jump_entries)
- return;
-
- for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
- head = &jump_label_table[i];
- hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
- hlist_for_each_entry_safe(e_module, module_node,
- module_node_next,
- &(e->modules), hlist) {
- if (e_module->mod != mod)
- continue;
- count = e_module->nr_entries;
- iter = e_module->table;
- while (count--) {
- if (within_module_init(iter->code, mod))
- iter->key = 0;
- iter++;
- }
- }
- }
- }
-}
-
-static int
-jump_label_module_notify(struct notifier_block *self, unsigned long val,
- void *data)
-{
- struct module *mod = data;
- int ret = 0;
-
- switch (val) {
- case MODULE_STATE_COMING:
- jump_label_lock();
- ret = add_jump_label_module(mod);
- if (ret)
- remove_jump_label_module(mod);
- jump_label_unlock();
- break;
- case MODULE_STATE_GOING:
- jump_label_lock();
- remove_jump_label_module(mod);
- jump_label_unlock();
- break;
- case MODULE_STATE_LIVE:
- jump_label_lock();
- remove_jump_label_module_init(mod);
- jump_label_unlock();
- break;
- }
- return ret;
-}
-
-/***
- * apply_jump_label_nops - patch module jump labels with arch_get_jump_label_nop()
- * @mod: module to patch
- *
- * Allow for run-time selection of the optimal nops. Before the module
- * loads patch these with arch_get_jump_label_nop(), which is specified by
- * the arch specific jump label code.
- */
-void jump_label_apply_nops(struct module *mod)
-{
- struct jump_entry *iter;
-
- /* if the module doesn't have jump label entries, just return */
- if (!mod->num_jump_entries)
- return;
-
- iter = mod->jump_entries;
- while (iter < mod->jump_entries + mod->num_jump_entries) {
- arch_jump_label_text_poke_early(iter->code);
- iter++;
- }
-}
-
-struct notifier_block jump_label_module_nb = {
- .notifier_call = jump_label_module_notify,
- .priority = 0,
-};
-
-static __init int init_jump_label_module(void)
-{
- return register_module_notifier(&jump_label_module_nb);
-}
-early_initcall(init_jump_label_module);
-
-#endif /* CONFIG_MODULES */
-
#endif
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 87b77de..8d814cb 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1531,13 +1531,7 @@
if (error)
goto Enable_cpus;
local_irq_disable();
- /* Suspend system devices */
- error = sysdev_suspend(PMSG_FREEZE);
- if (!error) {
- error = syscore_suspend();
- if (error)
- sysdev_resume();
- }
+ error = syscore_suspend();
if (error)
goto Enable_irqs;
} else
@@ -1553,7 +1547,6 @@
#ifdef CONFIG_KEXEC_JUMP
if (kexec_image->preserve_context) {
syscore_resume();
- sysdev_resume();
Enable_irqs:
local_irq_enable();
Enable_cpus:
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 9cd0591..5ae0ff3 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -245,7 +245,6 @@
}
}
-#ifdef CONFIG_PM_SLEEP
/*
* If set, call_usermodehelper_exec() will exit immediately returning -EBUSY
* (used for preventing user land processes from being created after the user
@@ -301,6 +300,15 @@
usermodehelper_disabled = 0;
}
+/**
+ * usermodehelper_is_disabled - check if new helpers are allowed to be started
+ */
+bool usermodehelper_is_disabled(void)
+{
+ return usermodehelper_disabled;
+}
+EXPORT_SYMBOL_GPL(usermodehelper_is_disabled);
+
static void helper_lock(void)
{
atomic_inc(&running_helpers);
@@ -312,12 +320,6 @@
if (atomic_dec_and_test(&running_helpers))
wake_up(&running_helpers_waitq);
}
-#else /* CONFIG_PM_SLEEP */
-#define usermodehelper_disabled 0
-
-static inline void helper_lock(void) {}
-static inline void helper_unlock(void) {}
-#endif /* CONFIG_PM_SLEEP */
/**
* call_usermodehelper_setup - prepare to call a usermode helper
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 0b624e7..3b053c0 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -16,6 +16,7 @@
#include <linux/kexec.h>
#include <linux/profile.h>
#include <linux/sched.h>
+#include <linux/capability.h>
#define KERNEL_ATTR_RO(_name) \
static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
@@ -131,6 +132,14 @@
#endif /* CONFIG_KEXEC */
+/* whether file capabilities are enabled */
+static ssize_t fscaps_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", file_caps_enabled);
+}
+KERNEL_ATTR_RO(fscaps);
+
/*
* Make /sys/kernel/notes give the raw contents of our kernel .notes section.
*/
@@ -158,6 +167,7 @@
EXPORT_SYMBOL_GPL(kernel_kobj);
static struct attribute * kernel_attrs[] = {
+ &fscaps_attr.attr,
#if defined(CONFIG_HOTPLUG)
&uevent_seqnum_attr.attr,
&uevent_helper_attr.attr,
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 53a6895..63437d0 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -490,6 +490,18 @@
usage[i] = '\0';
}
+static int __print_lock_name(struct lock_class *class)
+{
+ char str[KSYM_NAME_LEN];
+ const char *name;
+
+ name = class->name;
+ if (!name)
+ name = __get_key_name(class->key, str);
+
+ return printk("%s", name);
+}
+
static void print_lock_name(struct lock_class *class)
{
char str[KSYM_NAME_LEN], usage[LOCK_USAGE_CHARS];
@@ -1053,6 +1065,56 @@
return 0;
}
+static void
+print_circular_lock_scenario(struct held_lock *src,
+ struct held_lock *tgt,
+ struct lock_list *prt)
+{
+ struct lock_class *source = hlock_class(src);
+ struct lock_class *target = hlock_class(tgt);
+ struct lock_class *parent = prt->class;
+
+ /*
+ * A direct locking problem where unsafe_class lock is taken
+ * directly by safe_class lock, then all we need to show
+ * is the deadlock scenario, as it is obvious that the
+ * unsafe lock is taken under the safe lock.
+ *
+ * But if there is a chain instead, where the safe lock takes
+ * an intermediate lock (middle_class) where this lock is
+ * not the same as the safe lock, then the lock chain is
+ * used to describe the problem. Otherwise we would need
+ * to show a different CPU case for each link in the chain
+ * from the safe_class lock to the unsafe_class lock.
+ */
+ if (parent != source) {
+ printk("Chain exists of:\n ");
+ __print_lock_name(source);
+ printk(" --> ");
+ __print_lock_name(parent);
+ printk(" --> ");
+ __print_lock_name(target);
+ printk("\n\n");
+ }
+
+ printk(" Possible unsafe locking scenario:\n\n");
+ printk(" CPU0 CPU1\n");
+ printk(" ---- ----\n");
+ printk(" lock(");
+ __print_lock_name(target);
+ printk(");\n");
+ printk(" lock(");
+ __print_lock_name(parent);
+ printk(");\n");
+ printk(" lock(");
+ __print_lock_name(target);
+ printk(");\n");
+ printk(" lock(");
+ __print_lock_name(source);
+ printk(");\n");
+ printk("\n *** DEADLOCK ***\n\n");
+}
+
/*
* When a circular dependency is detected, print the
* header first:
@@ -1096,6 +1158,7 @@
{
struct task_struct *curr = current;
struct lock_list *parent;
+ struct lock_list *first_parent;
int depth;
if (!debug_locks_off_graph_unlock() || debug_locks_silent)
@@ -1109,6 +1172,7 @@
print_circular_bug_header(target, depth, check_src, check_tgt);
parent = get_lock_parent(target);
+ first_parent = parent;
while (parent) {
print_circular_bug_entry(parent, --depth);
@@ -1116,6 +1180,9 @@
}
printk("\nother info that might help us debug this:\n\n");
+ print_circular_lock_scenario(check_src, check_tgt,
+ first_parent);
+
lockdep_print_held_locks(curr);
printk("\nstack backtrace:\n");
@@ -1314,7 +1381,7 @@
printk("\n");
if (depth == 0 && (entry != root)) {
- printk("lockdep:%s bad BFS generated tree\n", __func__);
+ printk("lockdep:%s bad path found in chain graph\n", __func__);
break;
}
@@ -1325,6 +1392,62 @@
return;
}
+static void
+print_irq_lock_scenario(struct lock_list *safe_entry,
+ struct lock_list *unsafe_entry,
+ struct lock_class *prev_class,
+ struct lock_class *next_class)
+{
+ struct lock_class *safe_class = safe_entry->class;
+ struct lock_class *unsafe_class = unsafe_entry->class;
+ struct lock_class *middle_class = prev_class;
+
+ if (middle_class == safe_class)
+ middle_class = next_class;
+
+ /*
+ * A direct locking problem where unsafe_class lock is taken
+ * directly by safe_class lock, then all we need to show
+ * is the deadlock scenario, as it is obvious that the
+ * unsafe lock is taken under the safe lock.
+ *
+ * But if there is a chain instead, where the safe lock takes
+ * an intermediate lock (middle_class) where this lock is
+ * not the same as the safe lock, then the lock chain is
+ * used to describe the problem. Otherwise we would need
+ * to show a different CPU case for each link in the chain
+ * from the safe_class lock to the unsafe_class lock.
+ */
+ if (middle_class != unsafe_class) {
+ printk("Chain exists of:\n ");
+ __print_lock_name(safe_class);
+ printk(" --> ");
+ __print_lock_name(middle_class);
+ printk(" --> ");
+ __print_lock_name(unsafe_class);
+ printk("\n\n");
+ }
+
+ printk(" Possible interrupt unsafe locking scenario:\n\n");
+ printk(" CPU0 CPU1\n");
+ printk(" ---- ----\n");
+ printk(" lock(");
+ __print_lock_name(unsafe_class);
+ printk(");\n");
+ printk(" local_irq_disable();\n");
+ printk(" lock(");
+ __print_lock_name(safe_class);
+ printk(");\n");
+ printk(" lock(");
+ __print_lock_name(middle_class);
+ printk(");\n");
+ printk(" <Interrupt>\n");
+ printk(" lock(");
+ __print_lock_name(safe_class);
+ printk(");\n");
+ printk("\n *** DEADLOCK ***\n\n");
+}
+
static int
print_bad_irq_dependency(struct task_struct *curr,
struct lock_list *prev_root,
@@ -1376,6 +1499,9 @@
print_stack_trace(forwards_entry->class->usage_traces + bit2, 1);
printk("\nother info that might help us debug this:\n\n");
+ print_irq_lock_scenario(backwards_entry, forwards_entry,
+ hlock_class(prev), hlock_class(next));
+
lockdep_print_held_locks(curr);
printk("\nthe dependencies between %s-irq-safe lock", irqclass);
@@ -1539,6 +1665,26 @@
#endif
+static void
+print_deadlock_scenario(struct held_lock *nxt,
+ struct held_lock *prv)
+{
+ struct lock_class *next = hlock_class(nxt);
+ struct lock_class *prev = hlock_class(prv);
+
+ printk(" Possible unsafe locking scenario:\n\n");
+ printk(" CPU0\n");
+ printk(" ----\n");
+ printk(" lock(");
+ __print_lock_name(prev);
+ printk(");\n");
+ printk(" lock(");
+ __print_lock_name(next);
+ printk(");\n");
+ printk("\n *** DEADLOCK ***\n\n");
+ printk(" May be due to missing lock nesting notation\n\n");
+}
+
static int
print_deadlock_bug(struct task_struct *curr, struct held_lock *prev,
struct held_lock *next)
@@ -1557,6 +1703,7 @@
print_lock(prev);
printk("\nother info that might help us debug this:\n");
+ print_deadlock_scenario(next, prev);
lockdep_print_held_locks(curr);
printk("\nstack backtrace:\n");
@@ -1826,7 +1973,7 @@
struct list_head *hash_head = chainhashentry(chain_key);
struct lock_chain *chain;
struct held_lock *hlock_curr, *hlock_next;
- int i, j, n, cn;
+ int i, j;
if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
return 0;
@@ -1886,15 +2033,9 @@
}
i++;
chain->depth = curr->lockdep_depth + 1 - i;
- cn = nr_chain_hlocks;
- while (cn + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS) {
- n = cmpxchg(&nr_chain_hlocks, cn, cn + chain->depth);
- if (n == cn)
- break;
- cn = n;
- }
- if (likely(cn + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
- chain->base = cn;
+ if (likely(nr_chain_hlocks + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
+ chain->base = nr_chain_hlocks;
+ nr_chain_hlocks += chain->depth;
for (j = 0; j < chain->depth - 1; j++, i++) {
int lock_id = curr->held_locks[i].class_idx - 1;
chain_hlocks[chain->base + j] = lock_id;
@@ -2011,6 +2152,24 @@
#endif
}
+static void
+print_usage_bug_scenario(struct held_lock *lock)
+{
+ struct lock_class *class = hlock_class(lock);
+
+ printk(" Possible unsafe locking scenario:\n\n");
+ printk(" CPU0\n");
+ printk(" ----\n");
+ printk(" lock(");
+ __print_lock_name(class);
+ printk(");\n");
+ printk(" <Interrupt>\n");
+ printk(" lock(");
+ __print_lock_name(class);
+ printk(");\n");
+ printk("\n *** DEADLOCK ***\n\n");
+}
+
static int
print_usage_bug(struct task_struct *curr, struct held_lock *this,
enum lock_usage_bit prev_bit, enum lock_usage_bit new_bit)
@@ -2039,6 +2198,8 @@
print_irqtrace_events(curr);
printk("\nother info that might help us debug this:\n");
+ print_usage_bug_scenario(this);
+
lockdep_print_held_locks(curr);
printk("\nstack backtrace:\n");
@@ -2073,6 +2234,10 @@
struct held_lock *this, int forwards,
const char *irqclass)
{
+ struct lock_list *entry = other;
+ struct lock_list *middle = NULL;
+ int depth;
+
if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
@@ -2091,6 +2256,25 @@
printk("\n\nand interrupts could create inverse lock ordering between them.\n\n");
printk("\nother info that might help us debug this:\n");
+
+ /* Find a middle lock (if one exists) */
+ depth = get_lock_depth(other);
+ do {
+ if (depth == 0 && (entry != root)) {
+ printk("lockdep:%s bad path found in chain graph\n", __func__);
+ break;
+ }
+ middle = entry;
+ entry = get_lock_parent(entry);
+ depth--;
+ } while (entry && entry != root && (depth >= 0));
+ if (forwards)
+ print_irq_lock_scenario(root, other,
+ middle ? middle->class : root->class, other->class);
+ else
+ print_irq_lock_scenario(other, root,
+ middle ? middle->class : other->class, root->class);
+
lockdep_print_held_locks(curr);
printk("\nthe shortest dependencies between 2nd lock and 1st lock:\n");
diff --git a/kernel/module.c b/kernel/module.c
index d5938a5..2287972 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -57,6 +57,7 @@
#include <linux/kmemleak.h>
#include <linux/jump_label.h>
#include <linux/pfn.h>
+#include <linux/bsearch.h>
#define CREATE_TRACE_POINTS
#include <trace/events/module.h>
@@ -240,23 +241,24 @@
struct module *owner,
bool (*fn)(const struct symsearch *syms,
struct module *owner,
- unsigned int symnum, void *data),
+ void *data),
void *data)
{
- unsigned int i, j;
+ unsigned int j;
for (j = 0; j < arrsize; j++) {
- for (i = 0; i < arr[j].stop - arr[j].start; i++)
- if (fn(&arr[j], owner, i, data))
- return true;
+ if (fn(&arr[j], owner, data))
+ return true;
}
return false;
}
/* Returns true as soon as fn returns true, otherwise false. */
-bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner,
- unsigned int symnum, void *data), void *data)
+bool each_symbol_section(bool (*fn)(const struct symsearch *arr,
+ struct module *owner,
+ void *data),
+ void *data)
{
struct module *mod;
static const struct symsearch arr[] = {
@@ -309,7 +311,7 @@
}
return false;
}
-EXPORT_SYMBOL_GPL(each_symbol);
+EXPORT_SYMBOL_GPL(each_symbol_section);
struct find_symbol_arg {
/* Input */
@@ -323,15 +325,12 @@
const struct kernel_symbol *sym;
};
-static bool find_symbol_in_section(const struct symsearch *syms,
- struct module *owner,
- unsigned int symnum, void *data)
+static bool check_symbol(const struct symsearch *syms,
+ struct module *owner,
+ unsigned int symnum, void *data)
{
struct find_symbol_arg *fsa = data;
- if (strcmp(syms->start[symnum].name, fsa->name) != 0)
- return false;
-
if (!fsa->gplok) {
if (syms->licence == GPL_ONLY)
return false;
@@ -365,6 +364,30 @@
return true;
}
+static int cmp_name(const void *va, const void *vb)
+{
+ const char *a;
+ const struct kernel_symbol *b;
+ a = va; b = vb;
+ return strcmp(a, b->name);
+}
+
+static bool find_symbol_in_section(const struct symsearch *syms,
+ struct module *owner,
+ void *data)
+{
+ struct find_symbol_arg *fsa = data;
+ struct kernel_symbol *sym;
+
+ sym = bsearch(fsa->name, syms->start, syms->stop - syms->start,
+ sizeof(struct kernel_symbol), cmp_name);
+
+ if (sym != NULL && check_symbol(syms, owner, sym - syms->start, data))
+ return true;
+
+ return false;
+}
+
/* Find a symbol and return it, along with, (optional) crc and
* (optional) module which owns it. Needs preempt disabled or module_mutex. */
const struct kernel_symbol *find_symbol(const char *name,
@@ -379,7 +402,7 @@
fsa.gplok = gplok;
fsa.warn = warn;
- if (each_symbol(find_symbol_in_section, &fsa)) {
+ if (each_symbol_section(find_symbol_in_section, &fsa)) {
if (owner)
*owner = fsa.owner;
if (crc)
@@ -1607,27 +1630,28 @@
}
}
-/* Setting memory back to RW+NX before releasing it */
-void unset_section_ro_nx(struct module *mod, void *module_region)
+static void unset_module_core_ro_nx(struct module *mod)
{
- unsigned long total_pages;
+ set_page_attributes(mod->module_core + mod->core_text_size,
+ mod->module_core + mod->core_size,
+ set_memory_x);
+ set_page_attributes(mod->module_core,
+ mod->module_core + mod->core_ro_size,
+ set_memory_rw);
+}
- if (mod->module_core == module_region) {
- /* Set core as NX+RW */
- total_pages = MOD_NUMBER_OF_PAGES(mod->module_core, mod->core_size);
- set_memory_nx((unsigned long)mod->module_core, total_pages);
- set_memory_rw((unsigned long)mod->module_core, total_pages);
-
- } else if (mod->module_init == module_region) {
- /* Set init as NX+RW */
- total_pages = MOD_NUMBER_OF_PAGES(mod->module_init, mod->init_size);
- set_memory_nx((unsigned long)mod->module_init, total_pages);
- set_memory_rw((unsigned long)mod->module_init, total_pages);
- }
+static void unset_module_init_ro_nx(struct module *mod)
+{
+ set_page_attributes(mod->module_init + mod->init_text_size,
+ mod->module_init + mod->init_size,
+ set_memory_x);
+ set_page_attributes(mod->module_init,
+ mod->module_init + mod->init_ro_size,
+ set_memory_rw);
}
/* Iterate through all modules and set each module's text as RW */
-void set_all_modules_text_rw()
+void set_all_modules_text_rw(void)
{
struct module *mod;
@@ -1648,7 +1672,7 @@
}
/* Iterate through all modules and set each module's text as RO */
-void set_all_modules_text_ro()
+void set_all_modules_text_ro(void)
{
struct module *mod;
@@ -1669,7 +1693,8 @@
}
#else
static inline void set_section_ro_nx(void *base, unsigned long text_size, unsigned long ro_size, unsigned long total_size) { }
-static inline void unset_section_ro_nx(struct module *mod, void *module_region) { }
+static void unset_module_core_ro_nx(struct module *mod) { }
+static void unset_module_init_ro_nx(struct module *mod) { }
#endif
/* Free a module, remove from lists, etc. */
@@ -1696,7 +1721,7 @@
destroy_params(mod->kp, mod->num_kp);
/* This may be NULL, but that's OK */
- unset_section_ro_nx(mod, mod->module_init);
+ unset_module_init_ro_nx(mod);
module_free(mod, mod->module_init);
kfree(mod->args);
percpu_modfree(mod);
@@ -1705,7 +1730,7 @@
lockdep_free_key_range(mod->module_core, mod->core_size);
/* Finally, free the core (containing the module structure) */
- unset_section_ro_nx(mod, mod->module_core);
+ unset_module_core_ro_nx(mod);
module_free(mod, mod->module_core);
#ifdef CONFIG_MPU
@@ -2030,11 +2055,8 @@
const struct kernel_symbol *start,
const struct kernel_symbol *stop)
{
- const struct kernel_symbol *ks = start;
- for (; ks < stop; ks++)
- if (strcmp(ks->name, name) == 0)
- return ks;
- return NULL;
+ return bsearch(name, start, stop - start,
+ sizeof(struct kernel_symbol), cmp_name);
}
static int is_exported(const char *name, unsigned long value,
@@ -2931,10 +2953,11 @@
mod->symtab = mod->core_symtab;
mod->strtab = mod->core_strtab;
#endif
- unset_section_ro_nx(mod, mod->module_init);
+ unset_module_init_ro_nx(mod);
module_free(mod, mod->module_init);
mod->module_init = NULL;
mod->init_size = 0;
+ mod->init_ro_size = 0;
mod->init_text_size = 0;
mutex_unlock(&module_mutex);
diff --git a/kernel/mutex-debug.c b/kernel/mutex-debug.c
index ec815a9..73da83a 100644
--- a/kernel/mutex-debug.c
+++ b/kernel/mutex-debug.c
@@ -75,7 +75,7 @@
return;
DEBUG_LOCKS_WARN_ON(lock->magic != lock);
- DEBUG_LOCKS_WARN_ON(lock->owner != current_thread_info());
+ DEBUG_LOCKS_WARN_ON(lock->owner != current);
DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
mutex_clear_owner(lock);
}
diff --git a/kernel/mutex-debug.h b/kernel/mutex-debug.h
index 57d527a..0799fd3 100644
--- a/kernel/mutex-debug.h
+++ b/kernel/mutex-debug.h
@@ -29,7 +29,7 @@
static inline void mutex_set_owner(struct mutex *lock)
{
- lock->owner = current_thread_info();
+ lock->owner = current;
}
static inline void mutex_clear_owner(struct mutex *lock)
diff --git a/kernel/mutex.c b/kernel/mutex.c
index c4195fa..2c938e2 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -160,14 +160,7 @@
*/
for (;;) {
- struct thread_info *owner;
-
- /*
- * If we own the BKL, then don't spin. The owner of
- * the mutex might be waiting on us to release the BKL.
- */
- if (unlikely(current->lock_depth >= 0))
- break;
+ struct task_struct *owner;
/*
* If there's an owner, wait for it to either
diff --git a/kernel/mutex.h b/kernel/mutex.h
index 67578ca..4115fbf 100644
--- a/kernel/mutex.h
+++ b/kernel/mutex.h
@@ -19,7 +19,7 @@
#ifdef CONFIG_SMP
static inline void mutex_set_owner(struct mutex *lock)
{
- lock->owner = current_thread_info();
+ lock->owner = current;
}
static inline void mutex_clear_owner(struct mutex *lock)
diff --git a/kernel/params.c b/kernel/params.c
index 7ab388a..ed72e13 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -297,21 +297,15 @@
int param_set_bool(const char *val, const struct kernel_param *kp)
{
bool v;
+ int ret;
/* No equals means "set"... */
if (!val) val = "1";
/* One of =[yYnN01] */
- switch (val[0]) {
- case 'y': case 'Y': case '1':
- v = true;
- break;
- case 'n': case 'N': case '0':
- v = false;
- break;
- default:
- return -EINVAL;
- }
+ ret = strtobool(val, &v);
+ if (ret)
+ return ret;
if (kp->flags & KPARAM_ISBOOL)
*(bool *)kp->arg = v;
@@ -821,15 +815,18 @@
return sprintf(buf, "%s\n", vattr->version);
}
-extern struct module_version_attribute __start___modver[], __stop___modver[];
+extern const struct module_version_attribute *__start___modver[];
+extern const struct module_version_attribute *__stop___modver[];
static void __init version_sysfs_builtin(void)
{
- const struct module_version_attribute *vattr;
+ const struct module_version_attribute **p;
struct module_kobject *mk;
int err;
- for (vattr = __start___modver; vattr < __stop___modver; vattr++) {
+ for (p = __start___modver; p < __stop___modver; p++) {
+ const struct module_version_attribute *vattr = *p;
+
mk = locate_module_kobject(vattr->module_name);
if (mk) {
err = sysfs_create_file(&mk->kobj, &vattr->mattr.attr);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 6de9a8f..87f4d24 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -125,12 +125,6 @@
code. This is helpful when debugging and reporting PM bugs, like
suspend support.
-config PM_VERBOSE
- bool "Verbose Power Management debugging"
- depends on PM_DEBUG
- ---help---
- This option enables verbose messages from the Power Management code.
-
config PM_ADVANCED_DEBUG
bool "Extra PM attributes in sysfs for low-level debugging/testing"
depends on PM_DEBUG
@@ -229,3 +223,7 @@
representing individual voltage domains and provides SOC
implementations a ready to use framework to manage OPPs.
For more information, read <file:Documentation/power/opp.txt>
+
+config PM_RUNTIME_CLK
+ def_bool y
+ depends on PM_RUNTIME && HAVE_CLK
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 50aae66..f9bec56 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -272,12 +272,7 @@
local_irq_disable();
- error = sysdev_suspend(PMSG_FREEZE);
- if (!error) {
- error = syscore_suspend();
- if (error)
- sysdev_resume();
- }
+ error = syscore_suspend();
if (error) {
printk(KERN_ERR "PM: Some system devices failed to power down, "
"aborting hibernation\n");
@@ -302,7 +297,6 @@
Power_up:
syscore_resume();
- sysdev_resume();
/* NOTE: dpm_resume_noirq() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
@@ -333,20 +327,25 @@
int hibernation_snapshot(int platform_mode)
{
+ pm_message_t msg = PMSG_RECOVER;
int error;
error = platform_begin(platform_mode);
if (error)
goto Close;
+ error = dpm_prepare(PMSG_FREEZE);
+ if (error)
+ goto Complete_devices;
+
/* Preallocate image memory before shutting down devices. */
error = hibernate_preallocate_memory();
if (error)
- goto Close;
+ goto Complete_devices;
suspend_console();
pm_restrict_gfp_mask();
- error = dpm_suspend_start(PMSG_FREEZE);
+ error = dpm_suspend(PMSG_FREEZE);
if (error)
goto Recover_platform;
@@ -364,13 +363,17 @@
if (error || !in_suspend)
swsusp_free();
- dpm_resume_end(in_suspend ?
- (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+ msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
+ dpm_resume(msg);
if (error || !in_suspend)
pm_restore_gfp_mask();
resume_console();
+
+ Complete_devices:
+ dpm_complete(msg);
+
Close:
platform_end(platform_mode);
return error;
@@ -409,12 +412,7 @@
local_irq_disable();
- error = sysdev_suspend(PMSG_QUIESCE);
- if (!error) {
- error = syscore_suspend();
- if (error)
- sysdev_resume();
- }
+ error = syscore_suspend();
if (error)
goto Enable_irqs;
@@ -442,7 +440,6 @@
touch_softlockup_watchdog();
syscore_resume();
- sysdev_resume();
Enable_irqs:
local_irq_enable();
@@ -528,7 +525,6 @@
goto Platform_finish;
local_irq_disable();
- sysdev_suspend(PMSG_HIBERNATE);
syscore_suspend();
if (pm_wakeup_pending()) {
error = -EAGAIN;
@@ -541,7 +537,6 @@
Power_up:
syscore_resume();
- sysdev_resume();
local_irq_enable();
enable_nonboot_cpus();
@@ -982,10 +977,33 @@
power_attr(image_size);
+static ssize_t reserved_size_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", reserved_size);
+}
+
+static ssize_t reserved_size_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned long size;
+
+ if (sscanf(buf, "%lu", &size) == 1) {
+ reserved_size = size;
+ return n;
+ }
+
+ return -EINVAL;
+}
+
+power_attr(reserved_size);
+
static struct attribute * g[] = {
&disk_attr.attr,
&resume_attr.attr,
&image_size_attr.attr,
+ &reserved_size_attr.attr,
NULL,
};
diff --git a/kernel/power/main.c b/kernel/power/main.c
index de9aef8..2981af4 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -337,6 +337,7 @@
if (error)
return error;
hibernate_image_size_init();
+ hibernate_reserved_size_init();
power_kobj = kobject_create_and_add("power", NULL);
if (!power_kobj)
return -ENOMEM;
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 03634be..9a00a0a 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -15,6 +15,7 @@
#ifdef CONFIG_HIBERNATION
/* kernel/power/snapshot.c */
+extern void __init hibernate_reserved_size_init(void);
extern void __init hibernate_image_size_init(void);
#ifdef CONFIG_ARCH_HIBERNATION_HEADER
@@ -55,6 +56,7 @@
#else /* !CONFIG_HIBERNATION */
+static inline void hibernate_reserved_size_init(void) {}
static inline void hibernate_image_size_init(void) {}
#endif /* !CONFIG_HIBERNATION */
@@ -72,6 +74,8 @@
/* Preferred image size in bytes (default 500 MB) */
extern unsigned long image_size;
+/* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
+extern unsigned long reserved_size;
extern int in_suspend;
extern dev_t swsusp_resume_device;
extern sector_t swsusp_resume_block;
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index ca0aacc..ace5588 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -41,16 +41,28 @@
static void swsusp_unset_page_forbidden(struct page *);
/*
+ * Number of bytes to reserve for memory allocations made by device drivers
+ * from their ->freeze() and ->freeze_noirq() callbacks so that they don't
+ * cause image creation to fail (tunable via /sys/power/reserved_size).
+ */
+unsigned long reserved_size;
+
+void __init hibernate_reserved_size_init(void)
+{
+ reserved_size = SPARE_PAGES * PAGE_SIZE;
+}
+
+/*
* Preferred image size in bytes (tunable via /sys/power/image_size).
- * When it is set to N, the image creating code will do its best to
- * ensure the image size will not exceed N bytes, but if that is
- * impossible, it will try to create the smallest image possible.
+ * When it is set to N, swsusp will do its best to ensure the image
+ * size will not exceed N bytes, but if that is impossible, it will
+ * try to create the smallest image possible.
*/
unsigned long image_size;
void __init hibernate_image_size_init(void)
{
- image_size = (totalram_pages / 3) * PAGE_SIZE;
+ image_size = ((totalram_pages * 2) / 5) * PAGE_SIZE;
}
/* List of PBEs needed for restoring the pages that were allocated before
@@ -1263,11 +1275,13 @@
* frame in use. We also need a number of page frames to be free during
* hibernation for allocations made while saving the image and for device
* drivers, in case they need to allocate memory from their hibernation
- * callbacks (these two numbers are given by PAGES_FOR_IO and SPARE_PAGES,
- * respectively, both of which are rough estimates). To make this happen, we
- * compute the total number of available page frames and allocate at least
+ * callbacks (these two numbers are given by PAGES_FOR_IO (which is a rough
+ * estimate) and reserverd_size divided by PAGE_SIZE (which is tunable through
+ * /sys/power/reserved_size, respectively). To make this happen, we compute the
+ * total number of available page frames and allocate at least
*
- * ([page frames total] + PAGES_FOR_IO + [metadata pages]) / 2 + 2 * SPARE_PAGES
+ * ([page frames total] + PAGES_FOR_IO + [metadata pages]) / 2
+ * + 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE)
*
* of them, which corresponds to the maximum size of a hibernation image.
*
@@ -1322,7 +1336,8 @@
count -= totalreserve_pages;
/* Compute the maximum number of saveable pages to leave in memory. */
- max_size = (count - (size + PAGES_FOR_IO)) / 2 - 2 * SPARE_PAGES;
+ max_size = (count - (size + PAGES_FOR_IO)) / 2
+ - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);
/* Compute the desired number of image pages specified by image_size. */
size = DIV_ROUND_UP(image_size, PAGE_SIZE);
if (size > max_size)
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 8935369..1c41ba2 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -163,19 +163,13 @@
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
- error = sysdev_suspend(PMSG_SUSPEND);
- if (!error) {
- error = syscore_suspend();
- if (error)
- sysdev_resume();
- }
+ error = syscore_suspend();
if (!error) {
if (!(suspend_test(TEST_CORE) || pm_wakeup_pending())) {
error = suspend_ops->enter(state);
events_check_enabled = false;
}
syscore_resume();
- sysdev_resume();
}
arch_suspend_enable_irqs();
@@ -216,7 +210,6 @@
goto Close;
}
suspend_console();
- pm_restrict_gfp_mask();
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
@@ -227,13 +220,12 @@
if (suspend_test(TEST_DEVICES))
goto Recover_platform;
- suspend_enter(state);
+ error = suspend_enter(state);
Resume_devices:
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
- pm_restore_gfp_mask();
resume_console();
Close:
if (suspend_ops->end)
@@ -294,7 +286,9 @@
goto Finish;
pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+ pm_restrict_gfp_mask();
error = suspend_devices_and_enter(state);
+ pm_restore_gfp_mask();
Finish:
pr_debug("PM: Finishing wakeup.\n");
diff --git a/kernel/power/user.c b/kernel/power/user.c
index c36c3b9..7d02d33 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -135,8 +135,10 @@
free_basic_memory_bitmaps();
data = filp->private_data;
free_all_swap_pages(data->swap);
- if (data->frozen)
+ if (data->frozen) {
+ pm_restore_gfp_mask();
thaw_processes();
+ }
pm_notifier_call_chain(data->mode == O_RDONLY ?
PM_POST_HIBERNATION : PM_POST_RESTORE);
atomic_inc(&snapshot_device_available);
@@ -379,6 +381,7 @@
* PM_HIBERNATION_PREPARE
*/
error = suspend_devices_and_enter(PM_SUSPEND_MEM);
+ data->ready = 0;
break;
case SNAPSHOT_PLATFORM_SUPPORT:
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 0fc1eed..7a81fc0 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -22,6 +22,7 @@
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
/*
@@ -37,35 +38,33 @@
child->parent = new_parent;
}
-/*
- * Turn a tracing stop into a normal stop now, since with no tracer there
- * would be no way to wake it up with SIGCONT or SIGKILL. If there was a
- * signal sent that would resume the child, but didn't because it was in
- * TASK_TRACED, resume it now.
- * Requires that irqs be disabled.
- */
-static void ptrace_untrace(struct task_struct *child)
-{
- spin_lock(&child->sighand->siglock);
- if (task_is_traced(child)) {
- /*
- * If the group stop is completed or in progress,
- * this thread was already counted as stopped.
- */
- if (child->signal->flags & SIGNAL_STOP_STOPPED ||
- child->signal->group_stop_count)
- __set_task_state(child, TASK_STOPPED);
- else
- signal_wake_up(child, 1);
- }
- spin_unlock(&child->sighand->siglock);
-}
-
-/*
- * unptrace a task: move it back to its original parent and
- * remove it from the ptrace list.
+/**
+ * __ptrace_unlink - unlink ptracee and restore its execution state
+ * @child: ptracee to be unlinked
*
- * Must be called with the tasklist lock write-held.
+ * Remove @child from the ptrace list, move it back to the original parent,
+ * and restore the execution state so that it conforms to the group stop
+ * state.
+ *
+ * Unlinking can happen via two paths - explicit PTRACE_DETACH or ptracer
+ * exiting. For PTRACE_DETACH, unless the ptracee has been killed between
+ * ptrace_check_attach() and here, it's guaranteed to be in TASK_TRACED.
+ * If the ptracer is exiting, the ptracee can be in any state.
+ *
+ * After detach, the ptracee should be in a state which conforms to the
+ * group stop. If the group is stopped or in the process of stopping, the
+ * ptracee should be put into TASK_STOPPED; otherwise, it should be woken
+ * up from TASK_TRACED.
+ *
+ * If the ptracee is in TASK_TRACED and needs to be moved to TASK_STOPPED,
+ * it goes through TRACED -> RUNNING -> STOPPED transition which is similar
+ * to but in the opposite direction of what happens while attaching to a
+ * stopped task. However, in this direction, the intermediate RUNNING
+ * state is not hidden even from the current ptracer and if it immediately
+ * re-attaches and performs a WNOHANG wait(2), it may fail.
+ *
+ * CONTEXT:
+ * write_lock_irq(tasklist_lock)
*/
void __ptrace_unlink(struct task_struct *child)
{
@@ -75,8 +74,27 @@
child->parent = child->real_parent;
list_del_init(&child->ptrace_entry);
- if (task_is_traced(child))
- ptrace_untrace(child);
+ spin_lock(&child->sighand->siglock);
+
+ /*
+ * Reinstate GROUP_STOP_PENDING if group stop is in effect and
+ * @child isn't dead.
+ */
+ if (!(child->flags & PF_EXITING) &&
+ (child->signal->flags & SIGNAL_STOP_STOPPED ||
+ child->signal->group_stop_count))
+ child->group_stop |= GROUP_STOP_PENDING;
+
+ /*
+ * If transition to TASK_STOPPED is pending or in TASK_TRACED, kick
+ * @child in the butt. Note that @resume should be used iff @child
+ * is in TASK_TRACED; otherwise, we might unduly disrupt
+ * TASK_KILLABLE sleeps.
+ */
+ if (child->group_stop & GROUP_STOP_PENDING || task_is_traced(child))
+ signal_wake_up(child, task_is_traced(child));
+
+ spin_unlock(&child->sighand->siglock);
}
/*
@@ -95,16 +113,14 @@
*/
read_lock(&tasklist_lock);
if ((child->ptrace & PT_PTRACED) && child->parent == current) {
- ret = 0;
/*
* child->sighand can't be NULL, release_task()
* does ptrace_unlink() before __exit_signal().
*/
spin_lock_irq(&child->sighand->siglock);
- if (task_is_stopped(child))
- child->state = TASK_TRACED;
- else if (!task_is_traced(child) && !kill)
- ret = -ESRCH;
+ WARN_ON_ONCE(task_is_stopped(child));
+ if (task_is_traced(child) || kill)
+ ret = 0;
spin_unlock_irq(&child->sighand->siglock);
}
read_unlock(&tasklist_lock);
@@ -168,6 +184,7 @@
static int ptrace_attach(struct task_struct *task)
{
+ bool wait_trap = false;
int retval;
audit_ptrace(task);
@@ -207,12 +224,42 @@
__ptrace_link(task, current);
send_sig_info(SIGSTOP, SEND_SIG_FORCED, task);
+ spin_lock(&task->sighand->siglock);
+
+ /*
+ * If the task is already STOPPED, set GROUP_STOP_PENDING and
+ * TRAPPING, and kick it so that it transits to TRACED. TRAPPING
+ * will be cleared if the child completes the transition or any
+ * event which clears the group stop states happens. We'll wait
+ * for the transition to complete before returning from this
+ * function.
+ *
+ * This hides STOPPED -> RUNNING -> TRACED transition from the
+ * attaching thread but a different thread in the same group can
+ * still observe the transient RUNNING state. IOW, if another
+ * thread's WNOHANG wait(2) on the stopped tracee races against
+ * ATTACH, the wait(2) may fail due to the transient RUNNING.
+ *
+ * The following task_is_stopped() test is safe as both transitions
+ * in and out of STOPPED are protected by siglock.
+ */
+ if (task_is_stopped(task)) {
+ task->group_stop |= GROUP_STOP_PENDING | GROUP_STOP_TRAPPING;
+ signal_wake_up(task, 1);
+ wait_trap = true;
+ }
+
+ spin_unlock(&task->sighand->siglock);
+
retval = 0;
unlock_tasklist:
write_unlock_irq(&tasklist_lock);
unlock_creds:
mutex_unlock(&task->signal->cred_guard_mutex);
out:
+ if (wait_trap)
+ wait_event(current->signal->wait_chldexit,
+ !(task->group_stop & GROUP_STOP_TRAPPING));
return retval;
}
@@ -315,8 +362,6 @@
if (child->ptrace) {
child->exit_code = data;
dead = __ptrace_detach(current, child);
- if (!child->exit_state)
- wake_up_state(child, TASK_TRACED | TASK_STOPPED);
}
write_unlock_irq(&tasklist_lock);
@@ -879,3 +924,19 @@
return ret;
}
#endif /* CONFIG_COMPAT */
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+int ptrace_get_breakpoints(struct task_struct *tsk)
+{
+ if (atomic_inc_not_zero(&tsk->ptrace_bp_refcnt))
+ return 0;
+
+ return -1;
+}
+
+void ptrace_put_breakpoints(struct task_struct *tsk)
+{
+ if (atomic_dec_and_test(&tsk->ptrace_bp_refcnt))
+ flush_ptrace_hw_breakpoint(tsk);
+}
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index f3240e9..7784bd2 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -142,10 +142,17 @@
* Ensure that queued callbacks are all executed.
* If we detect that we are nested in a RCU read-side critical
* section, we should simply fail, otherwise we would deadlock.
+ * In !PREEMPT configurations, there is no way to tell if we are
+ * in a RCU read-side critical section or not, so we never
+ * attempt any fixup and just print a warning.
*/
+#ifndef CONFIG_PREEMPT
+ WARN_ON_ONCE(1);
+ return 0;
+#endif
if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
irqs_disabled()) {
- WARN_ON(1);
+ WARN_ON_ONCE(1);
return 0;
}
rcu_barrier();
@@ -184,10 +191,17 @@
* Ensure that queued callbacks are all executed.
* If we detect that we are nested in a RCU read-side critical
* section, we should simply fail, otherwise we would deadlock.
+ * In !PREEMPT configurations, there is no way to tell if we are
+ * in a RCU read-side critical section or not, so we never
+ * attempt any fixup and just print a warning.
*/
+#ifndef CONFIG_PREEMPT
+ WARN_ON_ONCE(1);
+ return 0;
+#endif
if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
irqs_disabled()) {
- WARN_ON(1);
+ WARN_ON_ONCE(1);
return 0;
}
rcu_barrier();
@@ -214,15 +228,17 @@
* Ensure that queued callbacks are all executed.
* If we detect that we are nested in a RCU read-side critical
* section, we should simply fail, otherwise we would deadlock.
- * Note that the machinery to reliably determine whether
- * or not we are in an RCU read-side critical section
- * exists only in the preemptible RCU implementations
- * (TINY_PREEMPT_RCU and TREE_PREEMPT_RCU), which is why
- * DEBUG_OBJECTS_RCU_HEAD is disallowed if !PREEMPT.
+ * In !PREEMPT configurations, there is no way to tell if we are
+ * in a RCU read-side critical section or not, so we never
+ * attempt any fixup and just print a warning.
*/
+#ifndef CONFIG_PREEMPT
+ WARN_ON_ONCE(1);
+ return 0;
+#endif
if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
irqs_disabled()) {
- WARN_ON(1);
+ WARN_ON_ONCE(1);
return 0;
}
rcu_barrier();
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index 0c343b9..7bbac7d 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -35,15 +35,16 @@
#include <linux/init.h>
#include <linux/time.h>
#include <linux/cpu.h>
+#include <linux/prefetch.h>
/* Controls for rcu_kthread() kthread, replacing RCU_SOFTIRQ used previously. */
static struct task_struct *rcu_kthread_task;
static DECLARE_WAIT_QUEUE_HEAD(rcu_kthread_wq);
static unsigned long have_rcu_kthread_work;
-static void invoke_rcu_kthread(void);
/* Forward declarations for rcutiny_plugin.h. */
struct rcu_ctrlblk;
+static void invoke_rcu_kthread(void);
static void rcu_process_callbacks(struct rcu_ctrlblk *rcp);
static int rcu_kthread(void *arg);
static void __call_rcu(struct rcu_head *head,
@@ -79,36 +80,45 @@
#endif /* #ifdef CONFIG_NO_HZ */
/*
- * Helper function for rcu_qsctr_inc() and rcu_bh_qsctr_inc().
- * Also disable irqs to avoid confusion due to interrupt handlers
+ * Helper function for rcu_sched_qs() and rcu_bh_qs().
+ * Also irqs are disabled to avoid confusion due to interrupt handlers
* invoking call_rcu().
*/
static int rcu_qsctr_help(struct rcu_ctrlblk *rcp)
{
- unsigned long flags;
-
- local_irq_save(flags);
if (rcp->rcucblist != NULL &&
rcp->donetail != rcp->curtail) {
rcp->donetail = rcp->curtail;
- local_irq_restore(flags);
return 1;
}
- local_irq_restore(flags);
return 0;
}
/*
+ * Wake up rcu_kthread() to process callbacks now eligible for invocation
+ * or to boost readers.
+ */
+static void invoke_rcu_kthread(void)
+{
+ have_rcu_kthread_work = 1;
+ wake_up(&rcu_kthread_wq);
+}
+
+/*
* Record an rcu quiescent state. And an rcu_bh quiescent state while we
* are at it, given that any rcu quiescent state is also an rcu_bh
* quiescent state. Use "+" instead of "||" to defeat short circuiting.
*/
void rcu_sched_qs(int cpu)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
if (rcu_qsctr_help(&rcu_sched_ctrlblk) +
rcu_qsctr_help(&rcu_bh_ctrlblk))
invoke_rcu_kthread();
+ local_irq_restore(flags);
}
/*
@@ -116,8 +126,12 @@
*/
void rcu_bh_qs(int cpu)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
if (rcu_qsctr_help(&rcu_bh_ctrlblk))
invoke_rcu_kthread();
+ local_irq_restore(flags);
}
/*
@@ -167,7 +181,7 @@
prefetch(next);
debug_rcu_head_unqueue(list);
local_bh_disable();
- list->func(list);
+ __rcu_reclaim(list);
local_bh_enable();
list = next;
RCU_TRACE(cb_count++);
@@ -208,20 +222,6 @@
}
/*
- * Wake up rcu_kthread() to process callbacks now eligible for invocation
- * or to boost readers.
- */
-static void invoke_rcu_kthread(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- have_rcu_kthread_work = 1;
- wake_up(&rcu_kthread_wq);
- local_irq_restore(flags);
-}
-
-/*
* Wait for a grace period to elapse. But it is illegal to invoke
* synchronize_sched() from within an RCU read-side critical section.
* Therefore, any legal call to synchronize_sched() is a quiescent
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcutiny_plugin.h
index 3cb8e36..f259c67 100644
--- a/kernel/rcutiny_plugin.h
+++ b/kernel/rcutiny_plugin.h
@@ -100,23 +100,28 @@
u8 completed; /* Last grace period completed. */
/* If all three are equal, RCU is idle. */
#ifdef CONFIG_RCU_BOOST
- s8 boosted_this_gp; /* Has boosting already happened? */
unsigned long boost_time; /* When to start boosting (jiffies) */
#endif /* #ifdef CONFIG_RCU_BOOST */
#ifdef CONFIG_RCU_TRACE
unsigned long n_grace_periods;
#ifdef CONFIG_RCU_BOOST
unsigned long n_tasks_boosted;
+ /* Total number of tasks boosted. */
unsigned long n_exp_boosts;
+ /* Number of tasks boosted for expedited GP. */
unsigned long n_normal_boosts;
- unsigned long n_normal_balk_blkd_tasks;
- unsigned long n_normal_balk_gp_tasks;
- unsigned long n_normal_balk_boost_tasks;
- unsigned long n_normal_balk_boosted;
- unsigned long n_normal_balk_notyet;
- unsigned long n_normal_balk_nos;
- unsigned long n_exp_balk_blkd_tasks;
- unsigned long n_exp_balk_nos;
+ /* Number of tasks boosted for normal GP. */
+ unsigned long n_balk_blkd_tasks;
+ /* Refused to boost: no blocked tasks. */
+ unsigned long n_balk_exp_gp_tasks;
+ /* Refused to boost: nothing blocking GP. */
+ unsigned long n_balk_boost_tasks;
+ /* Refused to boost: already boosting. */
+ unsigned long n_balk_notyet;
+ /* Refused to boost: not yet time. */
+ unsigned long n_balk_nos;
+ /* Refused to boost: not sure why, though. */
+ /* This can happen due to race conditions. */
#endif /* #ifdef CONFIG_RCU_BOOST */
#endif /* #ifdef CONFIG_RCU_TRACE */
};
@@ -201,7 +206,6 @@
#ifdef CONFIG_RCU_BOOST
static void rcu_initiate_boost_trace(void);
-static void rcu_initiate_exp_boost_trace(void);
#endif /* #ifdef CONFIG_RCU_BOOST */
/*
@@ -219,41 +223,21 @@
"N."[!rcu_preempt_ctrlblk.gp_tasks],
"E."[!rcu_preempt_ctrlblk.exp_tasks]);
#ifdef CONFIG_RCU_BOOST
- seq_printf(m, " ttb=%c btg=",
- "B."[!rcu_preempt_ctrlblk.boost_tasks]);
- switch (rcu_preempt_ctrlblk.boosted_this_gp) {
- case -1:
- seq_puts(m, "exp");
- break;
- case 0:
- seq_puts(m, "no");
- break;
- case 1:
- seq_puts(m, "begun");
- break;
- case 2:
- seq_puts(m, "done");
- break;
- default:
- seq_printf(m, "?%d?", rcu_preempt_ctrlblk.boosted_this_gp);
- }
- seq_printf(m, " ntb=%lu neb=%lu nnb=%lu j=%04x bt=%04x\n",
+ seq_printf(m, "%sttb=%c ntb=%lu neb=%lu nnb=%lu j=%04x bt=%04x\n",
+ " ",
+ "B."[!rcu_preempt_ctrlblk.boost_tasks],
rcu_preempt_ctrlblk.n_tasks_boosted,
rcu_preempt_ctrlblk.n_exp_boosts,
rcu_preempt_ctrlblk.n_normal_boosts,
(int)(jiffies & 0xffff),
(int)(rcu_preempt_ctrlblk.boost_time & 0xffff));
- seq_printf(m, " %s: nt=%lu gt=%lu bt=%lu b=%lu ny=%lu nos=%lu\n",
- "normal balk",
- rcu_preempt_ctrlblk.n_normal_balk_blkd_tasks,
- rcu_preempt_ctrlblk.n_normal_balk_gp_tasks,
- rcu_preempt_ctrlblk.n_normal_balk_boost_tasks,
- rcu_preempt_ctrlblk.n_normal_balk_boosted,
- rcu_preempt_ctrlblk.n_normal_balk_notyet,
- rcu_preempt_ctrlblk.n_normal_balk_nos);
- seq_printf(m, " exp balk: bt=%lu nos=%lu\n",
- rcu_preempt_ctrlblk.n_exp_balk_blkd_tasks,
- rcu_preempt_ctrlblk.n_exp_balk_nos);
+ seq_printf(m, "%s: nt=%lu egt=%lu bt=%lu ny=%lu nos=%lu\n",
+ " balk",
+ rcu_preempt_ctrlblk.n_balk_blkd_tasks,
+ rcu_preempt_ctrlblk.n_balk_exp_gp_tasks,
+ rcu_preempt_ctrlblk.n_balk_boost_tasks,
+ rcu_preempt_ctrlblk.n_balk_notyet,
+ rcu_preempt_ctrlblk.n_balk_nos);
#endif /* #ifdef CONFIG_RCU_BOOST */
}
@@ -271,25 +255,59 @@
{
unsigned long flags;
struct rt_mutex mtx;
- struct list_head *np;
struct task_struct *t;
+ struct list_head *tb;
- if (rcu_preempt_ctrlblk.boost_tasks == NULL)
+ if (rcu_preempt_ctrlblk.boost_tasks == NULL &&
+ rcu_preempt_ctrlblk.exp_tasks == NULL)
return 0; /* Nothing to boost. */
+
raw_local_irq_save(flags);
- rcu_preempt_ctrlblk.boosted_this_gp++;
- t = container_of(rcu_preempt_ctrlblk.boost_tasks, struct task_struct,
- rcu_node_entry);
- np = rcu_next_node_entry(t);
+
+ /*
+ * Recheck with irqs disabled: all tasks in need of boosting
+ * might exit their RCU read-side critical sections on their own
+ * if we are preempted just before disabling irqs.
+ */
+ if (rcu_preempt_ctrlblk.boost_tasks == NULL &&
+ rcu_preempt_ctrlblk.exp_tasks == NULL) {
+ raw_local_irq_restore(flags);
+ return 0;
+ }
+
+ /*
+ * Preferentially boost tasks blocking expedited grace periods.
+ * This cannot starve the normal grace periods because a second
+ * expedited grace period must boost all blocked tasks, including
+ * those blocking the pre-existing normal grace period.
+ */
+ if (rcu_preempt_ctrlblk.exp_tasks != NULL) {
+ tb = rcu_preempt_ctrlblk.exp_tasks;
+ RCU_TRACE(rcu_preempt_ctrlblk.n_exp_boosts++);
+ } else {
+ tb = rcu_preempt_ctrlblk.boost_tasks;
+ RCU_TRACE(rcu_preempt_ctrlblk.n_normal_boosts++);
+ }
+ RCU_TRACE(rcu_preempt_ctrlblk.n_tasks_boosted++);
+
+ /*
+ * We boost task t by manufacturing an rt_mutex that appears to
+ * be held by task t. We leave a pointer to that rt_mutex where
+ * task t can find it, and task t will release the mutex when it
+ * exits its outermost RCU read-side critical section. Then
+ * simply acquiring this artificial rt_mutex will boost task
+ * t's priority. (Thanks to tglx for suggesting this approach!)
+ */
+ t = container_of(tb, struct task_struct, rcu_node_entry);
rt_mutex_init_proxy_locked(&mtx, t);
t->rcu_boost_mutex = &mtx;
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED;
raw_local_irq_restore(flags);
rt_mutex_lock(&mtx);
- RCU_TRACE(rcu_preempt_ctrlblk.n_tasks_boosted++);
- rcu_preempt_ctrlblk.boosted_this_gp++;
- rt_mutex_unlock(&mtx);
- return rcu_preempt_ctrlblk.boost_tasks != NULL;
+ rt_mutex_unlock(&mtx); /* Keep lockdep happy. */
+
+ return rcu_preempt_ctrlblk.boost_tasks != NULL ||
+ rcu_preempt_ctrlblk.exp_tasks != NULL;
}
/*
@@ -304,42 +322,25 @@
*/
static int rcu_initiate_boost(void)
{
- if (!rcu_preempt_blocked_readers_cgp()) {
- RCU_TRACE(rcu_preempt_ctrlblk.n_normal_balk_blkd_tasks++);
+ if (!rcu_preempt_blocked_readers_cgp() &&
+ rcu_preempt_ctrlblk.exp_tasks == NULL) {
+ RCU_TRACE(rcu_preempt_ctrlblk.n_balk_exp_gp_tasks++);
return 0;
}
- if (rcu_preempt_ctrlblk.gp_tasks != NULL &&
- rcu_preempt_ctrlblk.boost_tasks == NULL &&
- rcu_preempt_ctrlblk.boosted_this_gp == 0 &&
- ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time)) {
- rcu_preempt_ctrlblk.boost_tasks = rcu_preempt_ctrlblk.gp_tasks;
+ if (rcu_preempt_ctrlblk.exp_tasks != NULL ||
+ (rcu_preempt_ctrlblk.gp_tasks != NULL &&
+ rcu_preempt_ctrlblk.boost_tasks == NULL &&
+ ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time))) {
+ if (rcu_preempt_ctrlblk.exp_tasks == NULL)
+ rcu_preempt_ctrlblk.boost_tasks =
+ rcu_preempt_ctrlblk.gp_tasks;
invoke_rcu_kthread();
- RCU_TRACE(rcu_preempt_ctrlblk.n_normal_boosts++);
} else
RCU_TRACE(rcu_initiate_boost_trace());
return 1;
}
-/*
- * Initiate boosting for an expedited grace period.
- */
-static void rcu_initiate_expedited_boost(void)
-{
- unsigned long flags;
-
- raw_local_irq_save(flags);
- if (!list_empty(&rcu_preempt_ctrlblk.blkd_tasks)) {
- rcu_preempt_ctrlblk.boost_tasks =
- rcu_preempt_ctrlblk.blkd_tasks.next;
- rcu_preempt_ctrlblk.boosted_this_gp = -1;
- invoke_rcu_kthread();
- RCU_TRACE(rcu_preempt_ctrlblk.n_exp_boosts++);
- } else
- RCU_TRACE(rcu_initiate_exp_boost_trace());
- raw_local_irq_restore(flags);
-}
-
-#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000);
+#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
/*
* Do priority-boost accounting for the start of a new grace period.
@@ -347,8 +348,6 @@
static void rcu_preempt_boost_start_gp(void)
{
rcu_preempt_ctrlblk.boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
- if (rcu_preempt_ctrlblk.boosted_this_gp > 0)
- rcu_preempt_ctrlblk.boosted_this_gp = 0;
}
#else /* #ifdef CONFIG_RCU_BOOST */
@@ -372,13 +371,6 @@
}
/*
- * If there is no RCU priority boosting, we don't initiate expedited boosting.
- */
-static void rcu_initiate_expedited_boost(void)
-{
-}
-
-/*
* If there is no RCU priority boosting, nothing to do at grace-period start.
*/
static void rcu_preempt_boost_start_gp(void)
@@ -418,7 +410,7 @@
if (!rcu_preempt_gp_in_progress())
return;
/*
- * Check up on boosting. If there are no readers blocking the
+ * Check up on boosting. If there are readers blocking the
* current grace period, leave.
*/
if (rcu_initiate_boost())
@@ -578,7 +570,7 @@
empty = !rcu_preempt_blocked_readers_cgp();
empty_exp = rcu_preempt_ctrlblk.exp_tasks == NULL;
np = rcu_next_node_entry(t);
- list_del(&t->rcu_node_entry);
+ list_del_init(&t->rcu_node_entry);
if (&t->rcu_node_entry == rcu_preempt_ctrlblk.gp_tasks)
rcu_preempt_ctrlblk.gp_tasks = np;
if (&t->rcu_node_entry == rcu_preempt_ctrlblk.exp_tasks)
@@ -587,7 +579,6 @@
if (&t->rcu_node_entry == rcu_preempt_ctrlblk.boost_tasks)
rcu_preempt_ctrlblk.boost_tasks = np;
#endif /* #ifdef CONFIG_RCU_BOOST */
- INIT_LIST_HEAD(&t->rcu_node_entry);
/*
* If this was the last task on the current list, and if
@@ -812,13 +803,16 @@
rpcp->exp_tasks = rpcp->blkd_tasks.next;
if (rpcp->exp_tasks == &rpcp->blkd_tasks)
rpcp->exp_tasks = NULL;
- local_irq_restore(flags);
/* Wait for tail of ->blkd_tasks list to drain. */
- if (rcu_preempted_readers_exp())
- rcu_initiate_expedited_boost();
+ if (!rcu_preempted_readers_exp())
+ local_irq_restore(flags);
+ else {
+ rcu_initiate_boost();
+ local_irq_restore(flags);
wait_event(sync_rcu_preempt_exp_wq,
!rcu_preempted_readers_exp());
+ }
/* Clean up and exit. */
barrier(); /* ensure expedited GP seen before counter increment. */
@@ -931,24 +925,17 @@
static void rcu_initiate_boost_trace(void)
{
- if (rcu_preempt_ctrlblk.gp_tasks == NULL)
- rcu_preempt_ctrlblk.n_normal_balk_gp_tasks++;
- else if (rcu_preempt_ctrlblk.boost_tasks != NULL)
- rcu_preempt_ctrlblk.n_normal_balk_boost_tasks++;
- else if (rcu_preempt_ctrlblk.boosted_this_gp != 0)
- rcu_preempt_ctrlblk.n_normal_balk_boosted++;
- else if (!ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time))
- rcu_preempt_ctrlblk.n_normal_balk_notyet++;
- else
- rcu_preempt_ctrlblk.n_normal_balk_nos++;
-}
-
-static void rcu_initiate_exp_boost_trace(void)
-{
if (list_empty(&rcu_preempt_ctrlblk.blkd_tasks))
- rcu_preempt_ctrlblk.n_exp_balk_blkd_tasks++;
+ rcu_preempt_ctrlblk.n_balk_blkd_tasks++;
+ else if (rcu_preempt_ctrlblk.gp_tasks == NULL &&
+ rcu_preempt_ctrlblk.exp_tasks == NULL)
+ rcu_preempt_ctrlblk.n_balk_exp_gp_tasks++;
+ else if (rcu_preempt_ctrlblk.boost_tasks != NULL)
+ rcu_preempt_ctrlblk.n_balk_boost_tasks++;
+ else if (!ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time))
+ rcu_preempt_ctrlblk.n_balk_notyet++;
else
- rcu_preempt_ctrlblk.n_exp_balk_nos++;
+ rcu_preempt_ctrlblk.n_balk_nos++;
}
#endif /* #ifdef CONFIG_RCU_BOOST */
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index c224da4..2e138db 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -131,7 +131,7 @@
static LIST_HEAD(rcu_torture_freelist);
static struct rcu_torture __rcu *rcu_torture_current;
-static long rcu_torture_current_version;
+static unsigned long rcu_torture_current_version;
static struct rcu_torture rcu_tortures[10 * RCU_TORTURE_PIPE_LEN];
static DEFINE_SPINLOCK(rcu_torture_lock);
static DEFINE_PER_CPU(long [RCU_TORTURE_PIPE_LEN + 1], rcu_torture_count) =
@@ -146,8 +146,6 @@
static atomic_t n_rcu_torture_error;
static long n_rcu_torture_boost_ktrerror;
static long n_rcu_torture_boost_rterror;
-static long n_rcu_torture_boost_allocerror;
-static long n_rcu_torture_boost_afferror;
static long n_rcu_torture_boost_failure;
static long n_rcu_torture_boosts;
static long n_rcu_torture_timers;
@@ -163,11 +161,11 @@
#endif
int rcutorture_runnable = RCUTORTURE_RUNNABLE_INIT;
-#ifdef CONFIG_RCU_BOOST
+#if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU)
#define rcu_can_boost() 1
-#else /* #ifdef CONFIG_RCU_BOOST */
+#else /* #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */
#define rcu_can_boost() 0
-#endif /* #else #ifdef CONFIG_RCU_BOOST */
+#endif /* #else #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */
static unsigned long boost_starttime; /* jiffies of next boost test start. */
DEFINE_MUTEX(boost_mutex); /* protect setting boost_starttime */
@@ -751,6 +749,7 @@
n_rcu_torture_boost_rterror++;
}
+ init_rcu_head_on_stack(&rbi.rcu);
/* Each pass through the following loop does one boost-test cycle. */
do {
/* Wait for the next test interval. */
@@ -810,6 +809,7 @@
/* Clean up and exit. */
VERBOSE_PRINTK_STRING("rcu_torture_boost task stopping");
+ destroy_rcu_head_on_stack(&rbi.rcu);
rcutorture_shutdown_absorb("rcu_torture_boost");
while (!kthread_should_stop() || rbi.inflight)
schedule_timeout_uninterruptible(1);
@@ -886,7 +886,7 @@
old_rp->rtort_pipe_count++;
cur_ops->deferred_free(old_rp);
}
- rcu_torture_current_version++;
+ rcutorture_record_progress(++rcu_torture_current_version);
oldbatch = cur_ops->completed();
rcu_stutter_wait("rcu_torture_writer");
} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
@@ -1066,8 +1066,8 @@
}
cnt += sprintf(&page[cnt], "%s%s ", torture_type, TORTURE_FLAG);
cnt += sprintf(&page[cnt],
- "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
- "rtmbe: %d rtbke: %ld rtbre: %ld rtbae: %ld rtbafe: %ld "
+ "rtc: %p ver: %lu tfle: %d rta: %d rtaf: %d rtf: %d "
+ "rtmbe: %d rtbke: %ld rtbre: %ld "
"rtbf: %ld rtb: %ld nt: %ld",
rcu_torture_current,
rcu_torture_current_version,
@@ -1078,16 +1078,12 @@
atomic_read(&n_rcu_torture_mberror),
n_rcu_torture_boost_ktrerror,
n_rcu_torture_boost_rterror,
- n_rcu_torture_boost_allocerror,
- n_rcu_torture_boost_afferror,
n_rcu_torture_boost_failure,
n_rcu_torture_boosts,
n_rcu_torture_timers);
if (atomic_read(&n_rcu_torture_mberror) != 0 ||
n_rcu_torture_boost_ktrerror != 0 ||
n_rcu_torture_boost_rterror != 0 ||
- n_rcu_torture_boost_allocerror != 0 ||
- n_rcu_torture_boost_afferror != 0 ||
n_rcu_torture_boost_failure != 0)
cnt += sprintf(&page[cnt], " !!!");
cnt += sprintf(&page[cnt], "\n%s%s ", torture_type, TORTURE_FLAG);
@@ -1331,6 +1327,7 @@
int i;
mutex_lock(&fullstop_mutex);
+ rcutorture_record_test_transition();
if (fullstop == FULLSTOP_SHUTDOWN) {
printk(KERN_WARNING /* but going down anyway, so... */
"Concurrent 'rmmod rcutorture' and shutdown illegal!\n");
@@ -1486,8 +1483,6 @@
atomic_set(&n_rcu_torture_error, 0);
n_rcu_torture_boost_ktrerror = 0;
n_rcu_torture_boost_rterror = 0;
- n_rcu_torture_boost_allocerror = 0;
- n_rcu_torture_boost_afferror = 0;
n_rcu_torture_boost_failure = 0;
n_rcu_torture_boosts = 0;
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
@@ -1624,6 +1619,7 @@
}
}
register_reboot_notifier(&rcutorture_shutdown_nb);
+ rcutorture_record_test_transition();
mutex_unlock(&fullstop_mutex);
return 0;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index dd4aea8..f07d2f0 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -47,6 +47,9 @@
#include <linux/mutex.h>
#include <linux/time.h>
#include <linux/kernel_stat.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/prefetch.h>
#include "rcutree.h"
@@ -79,10 +82,41 @@
struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
+static struct rcu_state *rcu_state;
+
int rcu_scheduler_active __read_mostly;
EXPORT_SYMBOL_GPL(rcu_scheduler_active);
/*
+ * Control variables for per-CPU and per-rcu_node kthreads. These
+ * handle all flavors of RCU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
+DEFINE_PER_CPU(int, rcu_cpu_kthread_cpu);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
+static DEFINE_PER_CPU(wait_queue_head_t, rcu_cpu_wq);
+DEFINE_PER_CPU(char, rcu_cpu_has_work);
+static char rcu_kthreads_spawnable;
+
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
+static void invoke_rcu_cpu_kthread(void);
+
+#define RCU_KTHREAD_PRIO 1 /* RT priority for per-CPU kthreads. */
+
+/*
+ * Track the rcutorture test sequence number and the update version
+ * number within a given test. The rcutorture_testseq is incremented
+ * on every rcutorture module load and unload, so has an odd value
+ * when a test is running. The rcutorture_vernum is set to zero
+ * when rcutorture starts and is incremented on each rcutorture update.
+ * These variables enable correlating rcutorture output with the
+ * RCU tracing information.
+ */
+unsigned long rcutorture_testseq;
+unsigned long rcutorture_vernum;
+
+/*
* Return true if an RCU grace period is in progress. The ACCESS_ONCE()s
* permit this function to be invoked without holding the root rcu_node
* structure's ->lock, but of course results can be subject to change.
@@ -124,6 +158,7 @@
rcu_sched_qs(cpu);
rcu_preempt_note_context_switch(cpu);
}
+EXPORT_SYMBOL_GPL(rcu_note_context_switch);
#ifdef CONFIG_NO_HZ
DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
@@ -140,10 +175,8 @@
module_param(qhimark, int, 0);
module_param(qlowmark, int, 0);
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-int rcu_cpu_stall_suppress __read_mostly = RCU_CPU_STALL_SUPPRESS_INIT;
+int rcu_cpu_stall_suppress __read_mostly;
module_param(rcu_cpu_stall_suppress, int, 0644);
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
static void force_quiescent_state(struct rcu_state *rsp, int relaxed);
static int rcu_pending(int cpu);
@@ -176,6 +209,31 @@
EXPORT_SYMBOL_GPL(rcu_bh_force_quiescent_state);
/*
+ * Record the number of times rcutorture tests have been initiated and
+ * terminated. This information allows the debugfs tracing stats to be
+ * correlated to the rcutorture messages, even when the rcutorture module
+ * is being repeatedly loaded and unloaded. In other words, we cannot
+ * store this state in rcutorture itself.
+ */
+void rcutorture_record_test_transition(void)
+{
+ rcutorture_testseq++;
+ rcutorture_vernum = 0;
+}
+EXPORT_SYMBOL_GPL(rcutorture_record_test_transition);
+
+/*
+ * Record the number of writer passes through the current rcutorture test.
+ * This is also used to correlate debugfs tracing stats with the rcutorture
+ * messages.
+ */
+void rcutorture_record_progress(unsigned long vernum)
+{
+ rcutorture_vernum++;
+}
+EXPORT_SYMBOL_GPL(rcutorture_record_progress);
+
+/*
* Force a quiescent state for RCU-sched.
*/
void rcu_sched_force_quiescent_state(void)
@@ -234,8 +292,8 @@
return 1;
}
- /* If preemptable RCU, no point in sending reschedule IPI. */
- if (rdp->preemptable)
+ /* If preemptible RCU, no point in sending reschedule IPI. */
+ if (rdp->preemptible)
return 0;
/* The CPU is online, so send it a reschedule IPI. */
@@ -450,8 +508,6 @@
#endif /* #else #ifdef CONFIG_NO_HZ */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
int rcu_cpu_stall_suppress __read_mostly;
static void record_gp_stall_check_time(struct rcu_state *rsp)
@@ -537,21 +593,24 @@
static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
{
- long delta;
+ unsigned long j;
+ unsigned long js;
struct rcu_node *rnp;
if (rcu_cpu_stall_suppress)
return;
- delta = jiffies - ACCESS_ONCE(rsp->jiffies_stall);
+ j = ACCESS_ONCE(jiffies);
+ js = ACCESS_ONCE(rsp->jiffies_stall);
rnp = rdp->mynode;
- if ((ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && delta >= 0) {
+ if ((ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && ULONG_CMP_GE(j, js)) {
/* We haven't checked in, so go dump stack. */
print_cpu_stall(rsp);
- } else if (rcu_gp_in_progress(rsp) && delta >= RCU_STALL_RAT_DELAY) {
+ } else if (rcu_gp_in_progress(rsp) &&
+ ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY)) {
- /* They had two time units to dump stack, so complain. */
+ /* They had a few time units to dump stack, so complain. */
print_other_cpu_stall(rsp);
}
}
@@ -587,26 +646,6 @@
atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block);
}
-#else /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-static void record_gp_stall_check_time(struct rcu_state *rsp)
-{
-}
-
-static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
-{
-}
-
-void rcu_cpu_stall_reset(void)
-{
-}
-
-static void __init check_cpu_stall_init(void)
-{
-}
-
-#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
/*
* Update CPU-local rcu_data state to record the newly noticed grace period.
* This is used both when we started the grace period and when we notice
@@ -809,6 +848,7 @@
rnp->completed = rsp->completed;
rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state OK. */
rcu_start_gp_per_cpu(rsp, rnp, rdp);
+ rcu_preempt_boost_start_gp(rnp);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return;
}
@@ -844,6 +884,7 @@
rnp->completed = rsp->completed;
if (rnp == rdp->mynode)
rcu_start_gp_per_cpu(rsp, rnp, rdp);
+ rcu_preempt_boost_start_gp(rnp);
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
@@ -864,7 +905,12 @@
static void rcu_report_qs_rsp(struct rcu_state *rsp, unsigned long flags)
__releases(rcu_get_root(rsp)->lock)
{
+ unsigned long gp_duration;
+
WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
+ gp_duration = jiffies - rsp->gp_start;
+ if (gp_duration > rsp->gp_max)
+ rsp->gp_max = gp_duration;
rsp->completed = rsp->gpnum;
rsp->signaled = RCU_GP_IDLE;
rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */
@@ -894,7 +940,7 @@
return;
}
rnp->qsmask &= ~mask;
- if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
+ if (rnp->qsmask != 0 || rcu_preempt_blocked_readers_cgp(rnp)) {
/* Other bits still set at this level, so done. */
raw_spin_unlock_irqrestore(&rnp->lock, flags);
@@ -1037,6 +1083,8 @@
/*
* Remove the outgoing CPU from the bitmasks in the rcu_node hierarchy
* and move all callbacks from the outgoing CPU to the current one.
+ * There can only be one CPU hotplug operation at a time, so no other
+ * CPU can be attempting to update rcu_cpu_kthread_task.
*/
static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
{
@@ -1045,6 +1093,14 @@
int need_report = 0;
struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
struct rcu_node *rnp;
+ struct task_struct *t;
+
+ /* Stop the CPU's kthread. */
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t != NULL) {
+ per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
+ kthread_stop(t);
+ }
/* Exclude any attempts to start a new grace period. */
raw_spin_lock_irqsave(&rsp->onofflock, flags);
@@ -1082,6 +1138,7 @@
raw_spin_unlock_irqrestore(&rnp->lock, flags);
if (need_report & RCU_OFL_TASKS_EXP_GP)
rcu_report_exp_rnp(rsp, rnp);
+ rcu_node_kthread_setaffinity(rnp, -1);
}
/*
@@ -1143,7 +1200,7 @@
next = list->next;
prefetch(next);
debug_rcu_head_unqueue(list);
- list->func(list);
+ __rcu_reclaim(list);
list = next;
if (++count >= rdp->blimit)
break;
@@ -1179,7 +1236,7 @@
/* Re-raise the RCU softirq if there are callbacks remaining. */
if (cpu_has_callbacks_ready_to_invoke(rdp))
- raise_softirq(RCU_SOFTIRQ);
+ invoke_rcu_cpu_kthread();
}
/*
@@ -1225,7 +1282,7 @@
}
rcu_preempt_check_callbacks(cpu);
if (rcu_pending(cpu))
- raise_softirq(RCU_SOFTIRQ);
+ invoke_rcu_cpu_kthread();
}
#ifdef CONFIG_SMP
@@ -1233,6 +1290,8 @@
/*
* Scan the leaf rcu_node structures, processing dyntick state for any that
* have not yet encountered a quiescent state, using the function specified.
+ * Also initiate boosting for any threads blocked on the root rcu_node.
+ *
* The caller must have suppressed start of new grace periods.
*/
static void force_qs_rnp(struct rcu_state *rsp, int (*f)(struct rcu_data *))
@@ -1251,7 +1310,7 @@
return;
}
if (rnp->qsmask == 0) {
- raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ rcu_initiate_boost(rnp, flags); /* releases rnp->lock */
continue;
}
cpu = rnp->grplo;
@@ -1269,6 +1328,11 @@
}
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
+ rnp = rcu_get_root(rsp);
+ if (rnp->qsmask == 0) {
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
+ }
}
/*
@@ -1389,7 +1453,7 @@
/*
* Do softirq processing for the current CPU.
*/
-static void rcu_process_callbacks(struct softirq_action *unused)
+static void rcu_process_callbacks(void)
{
/*
* Memory references from any prior RCU read-side critical sections
@@ -1414,6 +1478,347 @@
rcu_needs_cpu_flush();
}
+/*
+ * Wake up the current CPU's kthread. This replaces raise_softirq()
+ * in earlier versions of RCU. Note that because we are running on
+ * the current CPU with interrupts disabled, the rcu_cpu_kthread_task
+ * cannot disappear out from under us.
+ */
+static void invoke_rcu_cpu_kthread(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __this_cpu_write(rcu_cpu_has_work, 1);
+ if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) {
+ local_irq_restore(flags);
+ return;
+ }
+ wake_up(&__get_cpu_var(rcu_cpu_wq));
+ local_irq_restore(flags);
+}
+
+/*
+ * Wake up the specified per-rcu_node-structure kthread.
+ * Because the per-rcu_node kthreads are immortal, we don't need
+ * to do anything to keep them alive.
+ */
+static void invoke_rcu_node_kthread(struct rcu_node *rnp)
+{
+ struct task_struct *t;
+
+ t = rnp->node_kthread_task;
+ if (t != NULL)
+ wake_up_process(t);
+}
+
+/*
+ * Set the specified CPU's kthread to run RT or not, as specified by
+ * the to_rt argument. The CPU-hotplug locks are held, so the task
+ * is not going away.
+ */
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
+{
+ int policy;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t == NULL)
+ return;
+ if (to_rt) {
+ policy = SCHED_FIFO;
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ } else {
+ policy = SCHED_NORMAL;
+ sp.sched_priority = 0;
+ }
+ sched_setscheduler_nocheck(t, policy, &sp);
+}
+
+/*
+ * Timer handler to initiate the waking up of per-CPU kthreads that
+ * have yielded the CPU due to excess numbers of RCU callbacks.
+ * We wake up the per-rcu_node kthread, which in turn will wake up
+ * the booster kthread.
+ */
+static void rcu_cpu_kthread_timer(unsigned long arg)
+{
+ unsigned long flags;
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
+ struct rcu_node *rnp = rdp->mynode;
+
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ rnp->wakemask |= rdp->grpmask;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ invoke_rcu_node_kthread(rnp);
+}
+
+/*
+ * Drop to non-real-time priority and yield, but only after posting a
+ * timer that will cause us to regain our real-time priority if we
+ * remain preempted. Either way, we restore our real-time priority
+ * before returning.
+ */
+static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
+{
+ struct sched_param sp;
+ struct timer_list yield_timer;
+
+ setup_timer_on_stack(&yield_timer, f, arg);
+ mod_timer(&yield_timer, jiffies + 2);
+ sp.sched_priority = 0;
+ sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp);
+ set_user_nice(current, 19);
+ schedule();
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
+ del_timer(&yield_timer);
+}
+
+/*
+ * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
+ * This can happen while the corresponding CPU is either coming online
+ * or going offline. We cannot wait until the CPU is fully online
+ * before starting the kthread, because the various notifier functions
+ * can wait for RCU grace periods. So we park rcu_cpu_kthread() until
+ * the corresponding CPU is online.
+ *
+ * Return 1 if the kthread needs to stop, 0 otherwise.
+ *
+ * Caller must disable bh. This function can momentarily enable it.
+ */
+static int rcu_cpu_kthread_should_stop(int cpu)
+{
+ while (cpu_is_offline(cpu) ||
+ !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) ||
+ smp_processor_id() != cpu) {
+ if (kthread_should_stop())
+ return 1;
+ per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
+ local_bh_enable();
+ schedule_timeout_uninterruptible(1);
+ if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)))
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
+ local_bh_disable();
+ }
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+ return 0;
+}
+
+/*
+ * Per-CPU kernel thread that invokes RCU callbacks. This replaces the
+ * earlier RCU softirq.
+ */
+static int rcu_cpu_kthread(void *arg)
+{
+ int cpu = (int)(long)arg;
+ unsigned long flags;
+ int spincnt = 0;
+ unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
+ wait_queue_head_t *wqp = &per_cpu(rcu_cpu_wq, cpu);
+ char work;
+ char *workp = &per_cpu(rcu_cpu_has_work, cpu);
+
+ for (;;) {
+ *statusp = RCU_KTHREAD_WAITING;
+ wait_event_interruptible(*wqp,
+ *workp != 0 || kthread_should_stop());
+ local_bh_disable();
+ if (rcu_cpu_kthread_should_stop(cpu)) {
+ local_bh_enable();
+ break;
+ }
+ *statusp = RCU_KTHREAD_RUNNING;
+ per_cpu(rcu_cpu_kthread_loops, cpu)++;
+ local_irq_save(flags);
+ work = *workp;
+ *workp = 0;
+ local_irq_restore(flags);
+ if (work)
+ rcu_process_callbacks();
+ local_bh_enable();
+ if (*workp != 0)
+ spincnt++;
+ else
+ spincnt = 0;
+ if (spincnt > 10) {
+ *statusp = RCU_KTHREAD_YIELDING;
+ rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
+ spincnt = 0;
+ }
+ }
+ *statusp = RCU_KTHREAD_STOPPED;
+ return 0;
+}
+
+/*
+ * Spawn a per-CPU kthread, setting up affinity and priority.
+ * Because the CPU hotplug lock is held, no other CPU will be attempting
+ * to manipulate rcu_cpu_kthread_task. There might be another CPU
+ * attempting to access it during boot, but the locking in kthread_bind()
+ * will enforce sufficient ordering.
+ */
+static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
+{
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (!rcu_kthreads_spawnable ||
+ per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
+ return 0;
+ t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ kthread_bind(t, cpu);
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+ WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
+ per_cpu(rcu_cpu_kthread_task, cpu) = t;
+ wake_up_process(t);
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ return 0;
+}
+
+/*
+ * Per-rcu_node kthread, which is in charge of waking up the per-CPU
+ * kthreads when needed. We ignore requests to wake up kthreads
+ * for offline CPUs, which is OK because force_quiescent_state()
+ * takes care of this case.
+ */
+static int rcu_node_kthread(void *arg)
+{
+ int cpu;
+ unsigned long flags;
+ unsigned long mask;
+ struct rcu_node *rnp = (struct rcu_node *)arg;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ for (;;) {
+ rnp->node_kthread_status = RCU_KTHREAD_WAITING;
+ wait_event_interruptible(rnp->node_wq, rnp->wakemask != 0);
+ rnp->node_kthread_status = RCU_KTHREAD_RUNNING;
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ mask = rnp->wakemask;
+ rnp->wakemask = 0;
+ rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) {
+ if ((mask & 0x1) == 0)
+ continue;
+ preempt_disable();
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (!cpu_online(cpu) || t == NULL) {
+ preempt_enable();
+ continue;
+ }
+ per_cpu(rcu_cpu_has_work, cpu) = 1;
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ preempt_enable();
+ }
+ }
+ /* NOTREACHED */
+ rnp->node_kthread_status = RCU_KTHREAD_STOPPED;
+ return 0;
+}
+
+/*
+ * Set the per-rcu_node kthread's affinity to cover all CPUs that are
+ * served by the rcu_node in question. The CPU hotplug lock is still
+ * held, so the value of rnp->qsmaskinit will be stable.
+ *
+ * We don't include outgoingcpu in the affinity set, use -1 if there is
+ * no outgoing CPU. If there are no CPUs left in the affinity set,
+ * this function allows the kthread to execute on any CPU.
+ */
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
+{
+ cpumask_var_t cm;
+ int cpu;
+ unsigned long mask = rnp->qsmaskinit;
+
+ if (rnp->node_kthread_task == NULL)
+ return;
+ if (!alloc_cpumask_var(&cm, GFP_KERNEL))
+ return;
+ cpumask_clear(cm);
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
+ if ((mask & 0x1) && cpu != outgoingcpu)
+ cpumask_set_cpu(cpu, cm);
+ if (cpumask_weight(cm) == 0) {
+ cpumask_setall(cm);
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
+ cpumask_clear_cpu(cpu, cm);
+ WARN_ON_ONCE(cpumask_weight(cm) == 0);
+ }
+ set_cpus_allowed_ptr(rnp->node_kthread_task, cm);
+ rcu_boost_kthread_setaffinity(rnp, cm);
+ free_cpumask_var(cm);
+}
+
+/*
+ * Spawn a per-rcu_node kthread, setting priority and affinity.
+ * Called during boot before online/offline can happen, or, if
+ * during runtime, with the main CPU-hotplug locks held. So only
+ * one of these can be executing at a time.
+ */
+static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+ unsigned long flags;
+ int rnp_index = rnp - &rsp->node[0];
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (!rcu_kthreads_spawnable ||
+ rnp->qsmaskinit == 0)
+ return 0;
+ if (rnp->node_kthread_task == NULL) {
+ t = kthread_create(rcu_node_kthread, (void *)rnp,
+ "rcun%d", rnp_index);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ rnp->node_kthread_task = t;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ wake_up_process(t);
+ sp.sched_priority = 99;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ }
+ return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
+}
+
+/*
+ * Spawn all kthreads -- called as soon as the scheduler is running.
+ */
+static int __init rcu_spawn_kthreads(void)
+{
+ int cpu;
+ struct rcu_node *rnp;
+
+ rcu_kthreads_spawnable = 1;
+ for_each_possible_cpu(cpu) {
+ init_waitqueue_head(&per_cpu(rcu_cpu_wq, cpu));
+ per_cpu(rcu_cpu_has_work, cpu) = 0;
+ if (cpu_online(cpu))
+ (void)rcu_spawn_one_cpu_kthread(cpu);
+ }
+ rnp = rcu_get_root(rcu_state);
+ init_waitqueue_head(&rnp->node_wq);
+ rcu_init_boost_waitqueue(rnp);
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ if (NUM_RCU_NODES > 1)
+ rcu_for_each_leaf_node(rcu_state, rnp) {
+ init_waitqueue_head(&rnp->node_wq);
+ rcu_init_boost_waitqueue(rnp);
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ }
+ return 0;
+}
+early_initcall(rcu_spawn_kthreads);
+
static void
__call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
struct rcu_state *rsp)
@@ -1439,6 +1844,13 @@
/* Add the callback to our list. */
*rdp->nxttail[RCU_NEXT_TAIL] = head;
rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
+ rdp->qlen++;
+
+ /* If interrupts were disabled, don't dive into RCU core. */
+ if (irqs_disabled_flags(flags)) {
+ local_irq_restore(flags);
+ return;
+ }
/*
* Force the grace period if too many callbacks or too long waiting.
@@ -1447,7 +1859,7 @@
* invoking force_quiescent_state() if the newly enqueued callback
* is the only one waiting for a grace period to complete.
*/
- if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
+ if (unlikely(rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
/* Are we ignoring a completed grace period? */
rcu_process_gp_end(rsp, rdp);
@@ -1583,7 +1995,7 @@
* or RCU-bh, force a local reschedule.
*/
rdp->n_rp_qs_pending++;
- if (!rdp->preemptable &&
+ if (!rdp->preemptible &&
ULONG_CMP_LT(ACCESS_ONCE(rsp->jiffies_force_qs) - 1,
jiffies))
set_need_resched();
@@ -1760,7 +2172,7 @@
* that this CPU cannot possibly have any RCU callbacks in flight yet.
*/
static void __cpuinit
-rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
+rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
{
unsigned long flags;
unsigned long mask;
@@ -1772,7 +2184,7 @@
rdp->passed_quiesc = 0; /* We could be racing with new GP, */
rdp->qs_pending = 1; /* so set up to respond to current GP. */
rdp->beenonline = 1; /* We have now been online. */
- rdp->preemptable = preemptable;
+ rdp->preemptible = preemptible;
rdp->qlen_last_fqs_check = 0;
rdp->n_force_qs_snap = rsp->n_force_qs;
rdp->blimit = blimit;
@@ -1813,6 +2225,19 @@
rcu_preempt_init_percpu_data(cpu);
}
+static void __cpuinit rcu_online_kthreads(int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+ struct rcu_node *rnp = rdp->mynode;
+
+ /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
+ if (rcu_kthreads_spawnable) {
+ (void)rcu_spawn_one_cpu_kthread(cpu);
+ if (rnp->node_kthread_task == NULL)
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ }
+}
+
/*
* Handle CPU online/offline notification events.
*/
@@ -1820,11 +2245,23 @@
unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+ struct rcu_node *rnp = rdp->mynode;
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
rcu_online_cpu(cpu);
+ rcu_online_kthreads(cpu);
+ break;
+ case CPU_ONLINE:
+ case CPU_DOWN_FAILED:
+ rcu_node_kthread_setaffinity(rnp, -1);
+ rcu_cpu_kthread_setrt(cpu, 1);
+ break;
+ case CPU_DOWN_PREPARE:
+ rcu_node_kthread_setaffinity(rnp, cpu);
+ rcu_cpu_kthread_setrt(cpu, 0);
break;
case CPU_DYING:
case CPU_DYING_FROZEN:
@@ -1943,10 +2380,7 @@
j / rsp->levelspread[i - 1];
}
rnp->level = i;
- INIT_LIST_HEAD(&rnp->blocked_tasks[0]);
- INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
- INIT_LIST_HEAD(&rnp->blocked_tasks[2]);
- INIT_LIST_HEAD(&rnp->blocked_tasks[3]);
+ INIT_LIST_HEAD(&rnp->blkd_tasks);
}
}
@@ -1968,7 +2402,6 @@
rcu_init_one(&rcu_sched_state, &rcu_sched_data);
rcu_init_one(&rcu_bh_state, &rcu_bh_data);
__rcu_init_preempt();
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
/*
* We don't need protection against CPU-hotplug here because
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index e8f057e..2576648 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -91,6 +91,14 @@
/* remains even for nmi from irq handler. */
};
+/* RCU's kthread states for tracing. */
+#define RCU_KTHREAD_STOPPED 0
+#define RCU_KTHREAD_RUNNING 1
+#define RCU_KTHREAD_WAITING 2
+#define RCU_KTHREAD_OFFCPU 3
+#define RCU_KTHREAD_YIELDING 4
+#define RCU_KTHREAD_MAX 4
+
/*
* Definition for node within the RCU grace-period-detection hierarchy.
*/
@@ -109,10 +117,11 @@
/* an rcu_data structure, otherwise, each */
/* bit corresponds to a child rcu_node */
/* structure. */
- unsigned long expmask; /* Groups that have ->blocked_tasks[] */
+ unsigned long expmask; /* Groups that have ->blkd_tasks */
/* elements that need to drain to allow the */
/* current expedited grace period to */
/* complete (only for TREE_PREEMPT_RCU). */
+ unsigned long wakemask; /* CPUs whose kthread needs to be awakened. */
unsigned long qsmaskinit;
/* Per-GP initial value for qsmask & expmask. */
unsigned long grpmask; /* Mask to apply to parent qsmask. */
@@ -122,11 +131,68 @@
u8 grpnum; /* CPU/group number for next level up. */
u8 level; /* root is at level 0. */
struct rcu_node *parent;
- struct list_head blocked_tasks[4];
- /* Tasks blocked in RCU read-side critsect. */
- /* Grace period number (->gpnum) x blocked */
- /* by tasks on the (x & 0x1) element of the */
- /* blocked_tasks[] array. */
+ struct list_head blkd_tasks;
+ /* Tasks blocked in RCU read-side critical */
+ /* section. Tasks are placed at the head */
+ /* of this list and age towards the tail. */
+ struct list_head *gp_tasks;
+ /* Pointer to the first task blocking the */
+ /* current grace period, or NULL if there */
+ /* is no such task. */
+ struct list_head *exp_tasks;
+ /* Pointer to the first task blocking the */
+ /* current expedited grace period, or NULL */
+ /* if there is no such task. If there */
+ /* is no current expedited grace period, */
+ /* then there can cannot be any such task. */
+#ifdef CONFIG_RCU_BOOST
+ struct list_head *boost_tasks;
+ /* Pointer to first task that needs to be */
+ /* priority boosted, or NULL if no priority */
+ /* boosting is needed for this rcu_node */
+ /* structure. If there are no tasks */
+ /* queued on this rcu_node structure that */
+ /* are blocking the current grace period, */
+ /* there can be no such task. */
+ unsigned long boost_time;
+ /* When to start boosting (jiffies). */
+ struct task_struct *boost_kthread_task;
+ /* kthread that takes care of priority */
+ /* boosting for this rcu_node structure. */
+ wait_queue_head_t boost_wq;
+ /* Wait queue on which to park the boost */
+ /* kthread. */
+ unsigned int boost_kthread_status;
+ /* State of boost_kthread_task for tracing. */
+ unsigned long n_tasks_boosted;
+ /* Total number of tasks boosted. */
+ unsigned long n_exp_boosts;
+ /* Number of tasks boosted for expedited GP. */
+ unsigned long n_normal_boosts;
+ /* Number of tasks boosted for normal GP. */
+ unsigned long n_balk_blkd_tasks;
+ /* Refused to boost: no blocked tasks. */
+ unsigned long n_balk_exp_gp_tasks;
+ /* Refused to boost: nothing blocking GP. */
+ unsigned long n_balk_boost_tasks;
+ /* Refused to boost: already boosting. */
+ unsigned long n_balk_notblocked;
+ /* Refused to boost: RCU RS CS still running. */
+ unsigned long n_balk_notyet;
+ /* Refused to boost: not yet time. */
+ unsigned long n_balk_nos;
+ /* Refused to boost: not sure why, though. */
+ /* This can happen due to race conditions. */
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ struct task_struct *node_kthread_task;
+ /* kthread that takes care of this rcu_node */
+ /* structure, for example, awakening the */
+ /* per-CPU kthreads as needed. */
+ wait_queue_head_t node_wq;
+ /* Wait queue on which to park the per-node */
+ /* kthread. */
+ unsigned int node_kthread_status;
+ /* State of node_kthread_task for tracing. */
} ____cacheline_internodealigned_in_smp;
/*
@@ -175,7 +241,7 @@
bool passed_quiesc; /* User-mode/idle loop etc. */
bool qs_pending; /* Core waits for quiesc state. */
bool beenonline; /* CPU online at least once. */
- bool preemptable; /* Preemptable RCU? */
+ bool preemptible; /* Preemptible RCU? */
struct rcu_node *mynode; /* This CPU's leaf of hierarchy */
unsigned long grpmask; /* Mask to apply to leaf qsmask. */
@@ -254,7 +320,6 @@
#endif /* #else #ifdef CONFIG_NO_HZ */
#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
#ifdef CONFIG_PROVE_RCU
#define RCU_STALL_DELAY_DELTA (5 * HZ)
@@ -272,13 +337,6 @@
/* scheduling clock irq */
/* before ratting on them. */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE
-#define RCU_CPU_STALL_SUPPRESS_INIT 0
-#else
-#define RCU_CPU_STALL_SUPPRESS_INIT 1
-#endif
-
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
/*
* RCU global state, including node hierarchy. This hierarchy is
@@ -325,12 +383,12 @@
/* due to lock unavailable. */
unsigned long n_force_qs_ngp; /* Number of calls leaving */
/* due to no GP active. */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
unsigned long gp_start; /* Time at which GP started, */
/* but in jiffies. */
unsigned long jiffies_stall; /* Time at which to check */
/* for CPU stalls. */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+ unsigned long gp_max; /* Maximum GP duration in */
+ /* jiffies. */
char *name; /* Name of structure. */
};
@@ -361,16 +419,14 @@
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
static void rcu_preempt_note_context_switch(int cpu);
-static int rcu_preempted_readers(struct rcu_node *rnp);
+static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
unsigned long flags);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
static void rcu_print_detail_task_stall(struct rcu_state *rsp);
static void rcu_print_task_stall(struct rcu_node *rnp);
static void rcu_preempt_stall_reset(void);
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
@@ -390,5 +446,13 @@
static void rcu_preempt_send_cbs_to_online(void);
static void __init __rcu_init_preempt(void);
static void rcu_needs_cpu_flush(void);
+static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp);
+static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
+static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
+ cpumask_var_t cm);
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
+static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ int rnp_index);
#endif /* #ifndef RCU_TREE_NONCORE */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index a363871..3f6559a 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1,7 +1,7 @@
/*
* Read-Copy Update mechanism for mutual exclusion (tree-based version)
* Internal non-public definitions that provide either classic
- * or preemptable semantics.
+ * or preemptible semantics.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -54,10 +54,6 @@
#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
printk(KERN_INFO "\tRCU torture testing starts during boot.\n");
#endif
-#ifndef CONFIG_RCU_CPU_STALL_DETECTOR
- printk(KERN_INFO
- "\tRCU-based detection of stalled CPUs is disabled.\n");
-#endif
#if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE)
printk(KERN_INFO "\tVerbose stalled-CPUs detection is disabled.\n");
#endif
@@ -70,6 +66,7 @@
struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
+static struct rcu_state *rcu_state = &rcu_preempt_state;
static int rcu_preempted_readers_exp(struct rcu_node *rnp);
@@ -78,7 +75,7 @@
*/
static void __init rcu_bootup_announce(void)
{
- printk(KERN_INFO "Preemptable hierarchical RCU implementation.\n");
+ printk(KERN_INFO "Preemptible hierarchical RCU implementation.\n");
rcu_bootup_announce_oddness();
}
@@ -111,7 +108,7 @@
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
- * Record a preemptable-RCU quiescent state for the specified CPU. Note
+ * Record a preemptible-RCU quiescent state for the specified CPU. Note
* that this just means that the task currently running on the CPU is
* not in a quiescent state. There might be any number of tasks blocked
* while in an RCU read-side critical section.
@@ -134,12 +131,12 @@
* We have entered the scheduler, and the current task might soon be
* context-switched away from. If this task is in an RCU read-side
* critical section, we will no longer be able to rely on the CPU to
- * record that fact, so we enqueue the task on the appropriate entry
- * of the blocked_tasks[] array. The task will dequeue itself when
- * it exits the outermost enclosing RCU read-side critical section.
- * Therefore, the current grace period cannot be permitted to complete
- * until the blocked_tasks[] entry indexed by the low-order bit of
- * rnp->gpnum empties.
+ * record that fact, so we enqueue the task on the blkd_tasks list.
+ * The task will dequeue itself when it exits the outermost enclosing
+ * RCU read-side critical section. Therefore, the current grace period
+ * cannot be permitted to complete until the blkd_tasks list entries
+ * predating the current grace period drain, in other words, until
+ * rnp->gp_tasks becomes NULL.
*
* Caller must disable preemption.
*/
@@ -147,7 +144,6 @@
{
struct task_struct *t = current;
unsigned long flags;
- int phase;
struct rcu_data *rdp;
struct rcu_node *rnp;
@@ -169,15 +165,30 @@
* (i.e., this CPU has not yet passed through a quiescent
* state for the current grace period), then as long
* as that task remains queued, the current grace period
- * cannot end.
+ * cannot end. Note that there is some uncertainty as
+ * to exactly when the current grace period started.
+ * We take a conservative approach, which can result
+ * in unnecessarily waiting on tasks that started very
+ * slightly after the current grace period began. C'est
+ * la vie!!!
*
* But first, note that the current CPU must still be
* on line!
*/
WARN_ON_ONCE((rdp->grpmask & rnp->qsmaskinit) == 0);
WARN_ON_ONCE(!list_empty(&t->rcu_node_entry));
- phase = (rnp->gpnum + !(rnp->qsmask & rdp->grpmask)) & 0x1;
- list_add(&t->rcu_node_entry, &rnp->blocked_tasks[phase]);
+ if ((rnp->qsmask & rdp->grpmask) && rnp->gp_tasks != NULL) {
+ list_add(&t->rcu_node_entry, rnp->gp_tasks->prev);
+ rnp->gp_tasks = &t->rcu_node_entry;
+#ifdef CONFIG_RCU_BOOST
+ if (rnp->boost_tasks != NULL)
+ rnp->boost_tasks = rnp->gp_tasks;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ } else {
+ list_add(&t->rcu_node_entry, &rnp->blkd_tasks);
+ if (rnp->qsmask & rdp->grpmask)
+ rnp->gp_tasks = &t->rcu_node_entry;
+ }
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
@@ -196,7 +207,7 @@
}
/*
- * Tree-preemptable RCU implementation for rcu_read_lock().
+ * Tree-preemptible RCU implementation for rcu_read_lock().
* Just increment ->rcu_read_lock_nesting, shared state will be updated
* if we block.
*/
@@ -212,12 +223,9 @@
* for the specified rcu_node structure. If the caller needs a reliable
* answer, it must hold the rcu_node's ->lock.
*/
-static int rcu_preempted_readers(struct rcu_node *rnp)
+static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
{
- int phase = rnp->gpnum & 0x1;
-
- return !list_empty(&rnp->blocked_tasks[phase]) ||
- !list_empty(&rnp->blocked_tasks[phase + 2]);
+ return rnp->gp_tasks != NULL;
}
/*
@@ -233,7 +241,7 @@
unsigned long mask;
struct rcu_node *rnp_p;
- if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
+ if (rnp->qsmask != 0 || rcu_preempt_blocked_readers_cgp(rnp)) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
return; /* Still need more quiescent states! */
}
@@ -257,6 +265,21 @@
}
/*
+ * Advance a ->blkd_tasks-list pointer to the next entry, instead
+ * returning NULL if at the end of the list.
+ */
+static struct list_head *rcu_next_node_entry(struct task_struct *t,
+ struct rcu_node *rnp)
+{
+ struct list_head *np;
+
+ np = t->rcu_node_entry.next;
+ if (np == &rnp->blkd_tasks)
+ np = NULL;
+ return np;
+}
+
+/*
* Handle special cases during rcu_read_unlock(), such as needing to
* notify RCU core processing or task having blocked during the RCU
* read-side critical section.
@@ -266,6 +289,7 @@
int empty;
int empty_exp;
unsigned long flags;
+ struct list_head *np;
struct rcu_node *rnp;
int special;
@@ -306,10 +330,19 @@
break;
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
- empty = !rcu_preempted_readers(rnp);
+ empty = !rcu_preempt_blocked_readers_cgp(rnp);
empty_exp = !rcu_preempted_readers_exp(rnp);
smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */
+ np = rcu_next_node_entry(t, rnp);
list_del_init(&t->rcu_node_entry);
+ if (&t->rcu_node_entry == rnp->gp_tasks)
+ rnp->gp_tasks = np;
+ if (&t->rcu_node_entry == rnp->exp_tasks)
+ rnp->exp_tasks = np;
+#ifdef CONFIG_RCU_BOOST
+ if (&t->rcu_node_entry == rnp->boost_tasks)
+ rnp->boost_tasks = np;
+#endif /* #ifdef CONFIG_RCU_BOOST */
t->rcu_blocked_node = NULL;
/*
@@ -322,6 +355,15 @@
else
rcu_report_unblock_qs_rnp(rnp, flags);
+#ifdef CONFIG_RCU_BOOST
+ /* Unboost if we were boosted. */
+ if (special & RCU_READ_UNLOCK_BOOSTED) {
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BOOSTED;
+ rt_mutex_unlock(t->rcu_boost_mutex);
+ t->rcu_boost_mutex = NULL;
+ }
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
/*
* If this was the last task on the expedited lists,
* then we need to report up the rcu_node hierarchy.
@@ -334,7 +376,7 @@
}
/*
- * Tree-preemptable RCU implementation for rcu_read_unlock().
+ * Tree-preemptible RCU implementation for rcu_read_unlock().
* Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
* rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
* invoke rcu_read_unlock_special() to clean up after a context switch
@@ -356,8 +398,6 @@
}
EXPORT_SYMBOL_GPL(__rcu_read_unlock);
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
#ifdef CONFIG_RCU_CPU_STALL_VERBOSE
/*
@@ -367,18 +407,16 @@
static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp)
{
unsigned long flags;
- struct list_head *lp;
- int phase;
struct task_struct *t;
- if (rcu_preempted_readers(rnp)) {
- raw_spin_lock_irqsave(&rnp->lock, flags);
- phase = rnp->gpnum & 0x1;
- lp = &rnp->blocked_tasks[phase];
- list_for_each_entry(t, lp, rcu_node_entry)
- sched_show_task(t);
- raw_spin_unlock_irqrestore(&rnp->lock, flags);
- }
+ if (!rcu_preempt_blocked_readers_cgp(rnp))
+ return;
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ t = list_entry(rnp->gp_tasks,
+ struct task_struct, rcu_node_entry);
+ list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry)
+ sched_show_task(t);
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
/*
@@ -408,16 +446,14 @@
*/
static void rcu_print_task_stall(struct rcu_node *rnp)
{
- struct list_head *lp;
- int phase;
struct task_struct *t;
- if (rcu_preempted_readers(rnp)) {
- phase = rnp->gpnum & 0x1;
- lp = &rnp->blocked_tasks[phase];
- list_for_each_entry(t, lp, rcu_node_entry)
- printk(" P%d", t->pid);
- }
+ if (!rcu_preempt_blocked_readers_cgp(rnp))
+ return;
+ t = list_entry(rnp->gp_tasks,
+ struct task_struct, rcu_node_entry);
+ list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry)
+ printk(" P%d", t->pid);
}
/*
@@ -430,18 +466,21 @@
rcu_preempt_state.jiffies_stall = jiffies + ULONG_MAX / 2;
}
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
/*
* Check that the list of blocked tasks for the newly completed grace
* period is in fact empty. It is a serious bug to complete a grace
* period that still has RCU readers blocked! This function must be
* invoked -before- updating this rnp's ->gpnum, and the rnp's ->lock
* must be held by the caller.
+ *
+ * Also, if there are blocked tasks on the list, they automatically
+ * block the newly created grace period, so set up ->gp_tasks accordingly.
*/
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
- WARN_ON_ONCE(rcu_preempted_readers(rnp));
+ WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp(rnp));
+ if (!list_empty(&rnp->blkd_tasks))
+ rnp->gp_tasks = rnp->blkd_tasks.next;
WARN_ON_ONCE(rnp->qsmask);
}
@@ -465,50 +504,68 @@
struct rcu_node *rnp,
struct rcu_data *rdp)
{
- int i;
struct list_head *lp;
struct list_head *lp_root;
int retval = 0;
struct rcu_node *rnp_root = rcu_get_root(rsp);
- struct task_struct *tp;
+ struct task_struct *t;
if (rnp == rnp_root) {
WARN_ONCE(1, "Last CPU thought to be offlined?");
return 0; /* Shouldn't happen: at least one CPU online. */
}
- WARN_ON_ONCE(rnp != rdp->mynode &&
- (!list_empty(&rnp->blocked_tasks[0]) ||
- !list_empty(&rnp->blocked_tasks[1]) ||
- !list_empty(&rnp->blocked_tasks[2]) ||
- !list_empty(&rnp->blocked_tasks[3])));
+
+ /* If we are on an internal node, complain bitterly. */
+ WARN_ON_ONCE(rnp != rdp->mynode);
/*
- * Move tasks up to root rcu_node. Rely on the fact that the
- * root rcu_node can be at most one ahead of the rest of the
- * rcu_nodes in terms of gp_num value. This fact allows us to
- * move the blocked_tasks[] array directly, element by element.
+ * Move tasks up to root rcu_node. Don't try to get fancy for
+ * this corner-case operation -- just put this node's tasks
+ * at the head of the root node's list, and update the root node's
+ * ->gp_tasks and ->exp_tasks pointers to those of this node's,
+ * if non-NULL. This might result in waiting for more tasks than
+ * absolutely necessary, but this is a good performance/complexity
+ * tradeoff.
*/
- if (rcu_preempted_readers(rnp))
+ if (rcu_preempt_blocked_readers_cgp(rnp))
retval |= RCU_OFL_TASKS_NORM_GP;
if (rcu_preempted_readers_exp(rnp))
retval |= RCU_OFL_TASKS_EXP_GP;
- for (i = 0; i < 4; i++) {
- lp = &rnp->blocked_tasks[i];
- lp_root = &rnp_root->blocked_tasks[i];
- while (!list_empty(lp)) {
- tp = list_entry(lp->next, typeof(*tp), rcu_node_entry);
- raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
- list_del(&tp->rcu_node_entry);
- tp->rcu_blocked_node = rnp_root;
- list_add(&tp->rcu_node_entry, lp_root);
- raw_spin_unlock(&rnp_root->lock); /* irqs remain disabled */
- }
+ lp = &rnp->blkd_tasks;
+ lp_root = &rnp_root->blkd_tasks;
+ while (!list_empty(lp)) {
+ t = list_entry(lp->next, typeof(*t), rcu_node_entry);
+ raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
+ list_del(&t->rcu_node_entry);
+ t->rcu_blocked_node = rnp_root;
+ list_add(&t->rcu_node_entry, lp_root);
+ if (&t->rcu_node_entry == rnp->gp_tasks)
+ rnp_root->gp_tasks = rnp->gp_tasks;
+ if (&t->rcu_node_entry == rnp->exp_tasks)
+ rnp_root->exp_tasks = rnp->exp_tasks;
+#ifdef CONFIG_RCU_BOOST
+ if (&t->rcu_node_entry == rnp->boost_tasks)
+ rnp_root->boost_tasks = rnp->boost_tasks;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ raw_spin_unlock(&rnp_root->lock); /* irqs still disabled */
}
+
+#ifdef CONFIG_RCU_BOOST
+ /* In case root is being boosted and leaf is not. */
+ raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
+ if (rnp_root->boost_tasks != NULL &&
+ rnp_root->boost_tasks != rnp_root->gp_tasks)
+ rnp_root->boost_tasks = rnp_root->gp_tasks;
+ raw_spin_unlock(&rnp_root->lock); /* irqs still disabled */
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
+ rnp->gp_tasks = NULL;
+ rnp->exp_tasks = NULL;
return retval;
}
/*
- * Do CPU-offline processing for preemptable RCU.
+ * Do CPU-offline processing for preemptible RCU.
*/
static void rcu_preempt_offline_cpu(int cpu)
{
@@ -537,7 +594,7 @@
}
/*
- * Process callbacks for preemptable RCU.
+ * Process callbacks for preemptible RCU.
*/
static void rcu_preempt_process_callbacks(void)
{
@@ -546,7 +603,7 @@
}
/*
- * Queue a preemptable-RCU callback for invocation after a grace period.
+ * Queue a preemptible-RCU callback for invocation after a grace period.
*/
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
{
@@ -594,8 +651,7 @@
*/
static int rcu_preempted_readers_exp(struct rcu_node *rnp)
{
- return !list_empty(&rnp->blocked_tasks[2]) ||
- !list_empty(&rnp->blocked_tasks[3]);
+ return rnp->exp_tasks != NULL;
}
/*
@@ -655,13 +711,17 @@
static void
sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp)
{
- int must_wait;
+ unsigned long flags;
+ int must_wait = 0;
- raw_spin_lock(&rnp->lock); /* irqs already disabled */
- list_splice_init(&rnp->blocked_tasks[0], &rnp->blocked_tasks[2]);
- list_splice_init(&rnp->blocked_tasks[1], &rnp->blocked_tasks[3]);
- must_wait = rcu_preempted_readers_exp(rnp);
- raw_spin_unlock(&rnp->lock); /* irqs remain disabled */
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ if (list_empty(&rnp->blkd_tasks))
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ else {
+ rnp->exp_tasks = rnp->blkd_tasks.next;
+ rcu_initiate_boost(rnp, flags); /* releases rnp->lock */
+ must_wait = 1;
+ }
if (!must_wait)
rcu_report_exp_rnp(rsp, rnp);
}
@@ -669,9 +729,7 @@
/*
* Wait for an rcu-preempt grace period, but expedite it. The basic idea
* is to invoke synchronize_sched_expedited() to push all the tasks to
- * the ->blocked_tasks[] lists, move all entries from the first set of
- * ->blocked_tasks[] lists to the second set, and finally wait for this
- * second set to drain.
+ * the ->blkd_tasks lists and wait for this list to drain.
*/
void synchronize_rcu_expedited(void)
{
@@ -703,7 +761,7 @@
if ((ACCESS_ONCE(sync_rcu_preempt_exp_count) - snap) > 0)
goto unlock_mb_ret; /* Others did our work for us. */
- /* force all RCU readers onto blocked_tasks[]. */
+ /* force all RCU readers onto ->blkd_tasks lists. */
synchronize_sched_expedited();
raw_spin_lock_irqsave(&rsp->onofflock, flags);
@@ -715,7 +773,7 @@
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
- /* Snapshot current state of ->blocked_tasks[] lists. */
+ /* Snapshot current state of ->blkd_tasks lists. */
rcu_for_each_leaf_node(rsp, rnp)
sync_rcu_preempt_exp_init(rsp, rnp);
if (NUM_RCU_NODES > 1)
@@ -723,7 +781,7 @@
raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
- /* Wait for snapshotted ->blocked_tasks[] lists to drain. */
+ /* Wait for snapshotted ->blkd_tasks lists to drain. */
rnp = rcu_get_root(rsp);
wait_event(sync_rcu_preempt_exp_wq,
sync_rcu_preempt_exp_done(rnp));
@@ -739,7 +797,7 @@
EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
/*
- * Check to see if there is any immediate preemptable-RCU-related work
+ * Check to see if there is any immediate preemptible-RCU-related work
* to be done.
*/
static int rcu_preempt_pending(int cpu)
@@ -749,7 +807,7 @@
}
/*
- * Does preemptable RCU need the CPU to stay out of dynticks mode?
+ * Does preemptible RCU need the CPU to stay out of dynticks mode?
*/
static int rcu_preempt_needs_cpu(int cpu)
{
@@ -766,7 +824,7 @@
EXPORT_SYMBOL_GPL(rcu_barrier);
/*
- * Initialize preemptable RCU's per-CPU data.
+ * Initialize preemptible RCU's per-CPU data.
*/
static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
{
@@ -774,7 +832,7 @@
}
/*
- * Move preemptable RCU's callbacks from dying CPU to other online CPU.
+ * Move preemptible RCU's callbacks from dying CPU to other online CPU.
*/
static void rcu_preempt_send_cbs_to_online(void)
{
@@ -782,7 +840,7 @@
}
/*
- * Initialize preemptable RCU's state structures.
+ * Initialize preemptible RCU's state structures.
*/
static void __init __rcu_init_preempt(void)
{
@@ -790,7 +848,7 @@
}
/*
- * Check for a task exiting while in a preemptable-RCU read-side
+ * Check for a task exiting while in a preemptible-RCU read-side
* critical section, clean up if so. No need to issue warnings,
* as debug_check_no_locks_held() already does this if lockdep
* is enabled.
@@ -802,11 +860,13 @@
if (t->rcu_read_lock_nesting == 0)
return;
t->rcu_read_lock_nesting = 1;
- rcu_read_unlock();
+ __rcu_read_unlock();
}
#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+static struct rcu_state *rcu_state = &rcu_sched_state;
+
/*
* Tell them what RCU they are running.
*/
@@ -836,7 +896,7 @@
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
- * Because preemptable RCU does not exist, we never have to check for
+ * Because preemptible RCU does not exist, we never have to check for
* CPUs being in quiescent states.
*/
static void rcu_preempt_note_context_switch(int cpu)
@@ -844,10 +904,10 @@
}
/*
- * Because preemptable RCU does not exist, there are never any preempted
+ * Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
*/
-static int rcu_preempted_readers(struct rcu_node *rnp)
+static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
{
return 0;
}
@@ -862,10 +922,8 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
/*
- * Because preemptable RCU does not exist, we never have to check for
+ * Because preemptible RCU does not exist, we never have to check for
* tasks blocked within RCU read-side critical sections.
*/
static void rcu_print_detail_task_stall(struct rcu_state *rsp)
@@ -873,7 +931,7 @@
}
/*
- * Because preemptable RCU does not exist, we never have to check for
+ * Because preemptible RCU does not exist, we never have to check for
* tasks blocked within RCU read-side critical sections.
*/
static void rcu_print_task_stall(struct rcu_node *rnp)
@@ -888,10 +946,8 @@
{
}
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
/*
- * Because there is no preemptable RCU, there can be no readers blocked,
+ * Because there is no preemptible RCU, there can be no readers blocked,
* so there is no need to check for blocked tasks. So check only for
* bogus qsmask values.
*/
@@ -903,7 +959,7 @@
#ifdef CONFIG_HOTPLUG_CPU
/*
- * Because preemptable RCU does not exist, it never needs to migrate
+ * Because preemptible RCU does not exist, it never needs to migrate
* tasks that were blocked within RCU read-side critical sections, and
* such non-existent tasks cannot possibly have been blocking the current
* grace period.
@@ -916,7 +972,7 @@
}
/*
- * Because preemptable RCU does not exist, it never needs CPU-offline
+ * Because preemptible RCU does not exist, it never needs CPU-offline
* processing.
*/
static void rcu_preempt_offline_cpu(int cpu)
@@ -926,7 +982,7 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
- * Because preemptable RCU does not exist, it never has any callbacks
+ * Because preemptible RCU does not exist, it never has any callbacks
* to check.
*/
static void rcu_preempt_check_callbacks(int cpu)
@@ -934,7 +990,7 @@
}
/*
- * Because preemptable RCU does not exist, it never has any callbacks
+ * Because preemptible RCU does not exist, it never has any callbacks
* to process.
*/
static void rcu_preempt_process_callbacks(void)
@@ -943,7 +999,7 @@
/*
* Wait for an rcu-preempt grace period, but make it happen quickly.
- * But because preemptable RCU does not exist, map to rcu-sched.
+ * But because preemptible RCU does not exist, map to rcu-sched.
*/
void synchronize_rcu_expedited(void)
{
@@ -954,7 +1010,7 @@
#ifdef CONFIG_HOTPLUG_CPU
/*
- * Because preemptable RCU does not exist, there is never any need to
+ * Because preemptible RCU does not exist, there is never any need to
* report on tasks preempted in RCU read-side critical sections during
* expedited RCU grace periods.
*/
@@ -966,7 +1022,7 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
- * Because preemptable RCU does not exist, it never has any work to do.
+ * Because preemptible RCU does not exist, it never has any work to do.
*/
static int rcu_preempt_pending(int cpu)
{
@@ -974,7 +1030,7 @@
}
/*
- * Because preemptable RCU does not exist, it never needs any CPU.
+ * Because preemptible RCU does not exist, it never needs any CPU.
*/
static int rcu_preempt_needs_cpu(int cpu)
{
@@ -982,7 +1038,7 @@
}
/*
- * Because preemptable RCU does not exist, rcu_barrier() is just
+ * Because preemptible RCU does not exist, rcu_barrier() is just
* another name for rcu_barrier_sched().
*/
void rcu_barrier(void)
@@ -992,7 +1048,7 @@
EXPORT_SYMBOL_GPL(rcu_barrier);
/*
- * Because preemptable RCU does not exist, there is no per-CPU
+ * Because preemptible RCU does not exist, there is no per-CPU
* data to initialize.
*/
static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
@@ -1000,14 +1056,14 @@
}
/*
- * Because there is no preemptable RCU, there are no callbacks to move.
+ * Because there is no preemptible RCU, there are no callbacks to move.
*/
static void rcu_preempt_send_cbs_to_online(void)
{
}
/*
- * Because preemptable RCU does not exist, it need not be initialized.
+ * Because preemptible RCU does not exist, it need not be initialized.
*/
static void __init __rcu_init_preempt(void)
{
@@ -1015,6 +1071,276 @@
#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+#ifdef CONFIG_RCU_BOOST
+
+#include "rtmutex_common.h"
+
+#ifdef CONFIG_RCU_TRACE
+
+static void rcu_initiate_boost_trace(struct rcu_node *rnp)
+{
+ if (list_empty(&rnp->blkd_tasks))
+ rnp->n_balk_blkd_tasks++;
+ else if (rnp->exp_tasks == NULL && rnp->gp_tasks == NULL)
+ rnp->n_balk_exp_gp_tasks++;
+ else if (rnp->gp_tasks != NULL && rnp->boost_tasks != NULL)
+ rnp->n_balk_boost_tasks++;
+ else if (rnp->gp_tasks != NULL && rnp->qsmask != 0)
+ rnp->n_balk_notblocked++;
+ else if (rnp->gp_tasks != NULL &&
+ ULONG_CMP_LT(jiffies, rnp->boost_time))
+ rnp->n_balk_notyet++;
+ else
+ rnp->n_balk_nos++;
+}
+
+#else /* #ifdef CONFIG_RCU_TRACE */
+
+static void rcu_initiate_boost_trace(struct rcu_node *rnp)
+{
+}
+
+#endif /* #else #ifdef CONFIG_RCU_TRACE */
+
+/*
+ * Carry out RCU priority boosting on the task indicated by ->exp_tasks
+ * or ->boost_tasks, advancing the pointer to the next task in the
+ * ->blkd_tasks list.
+ *
+ * Note that irqs must be enabled: boosting the task can block.
+ * Returns 1 if there are more tasks needing to be boosted.
+ */
+static int rcu_boost(struct rcu_node *rnp)
+{
+ unsigned long flags;
+ struct rt_mutex mtx;
+ struct task_struct *t;
+ struct list_head *tb;
+
+ if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL)
+ return 0; /* Nothing left to boost. */
+
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+
+ /*
+ * Recheck under the lock: all tasks in need of boosting
+ * might exit their RCU read-side critical sections on their own.
+ */
+ if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL) {
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ return 0;
+ }
+
+ /*
+ * Preferentially boost tasks blocking expedited grace periods.
+ * This cannot starve the normal grace periods because a second
+ * expedited grace period must boost all blocked tasks, including
+ * those blocking the pre-existing normal grace period.
+ */
+ if (rnp->exp_tasks != NULL) {
+ tb = rnp->exp_tasks;
+ rnp->n_exp_boosts++;
+ } else {
+ tb = rnp->boost_tasks;
+ rnp->n_normal_boosts++;
+ }
+ rnp->n_tasks_boosted++;
+
+ /*
+ * We boost task t by manufacturing an rt_mutex that appears to
+ * be held by task t. We leave a pointer to that rt_mutex where
+ * task t can find it, and task t will release the mutex when it
+ * exits its outermost RCU read-side critical section. Then
+ * simply acquiring this artificial rt_mutex will boost task
+ * t's priority. (Thanks to tglx for suggesting this approach!)
+ *
+ * Note that task t must acquire rnp->lock to remove itself from
+ * the ->blkd_tasks list, which it will do from exit() if from
+ * nowhere else. We therefore are guaranteed that task t will
+ * stay around at least until we drop rnp->lock. Note that
+ * rnp->lock also resolves races between our priority boosting
+ * and task t's exiting its outermost RCU read-side critical
+ * section.
+ */
+ t = container_of(tb, struct task_struct, rcu_node_entry);
+ rt_mutex_init_proxy_locked(&mtx, t);
+ t->rcu_boost_mutex = &mtx;
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ rt_mutex_lock(&mtx); /* Side effect: boosts task t's priority. */
+ rt_mutex_unlock(&mtx); /* Keep lockdep happy. */
+
+ return rnp->exp_tasks != NULL || rnp->boost_tasks != NULL;
+}
+
+/*
+ * Timer handler to initiate waking up of boost kthreads that
+ * have yielded the CPU due to excessive numbers of tasks to
+ * boost. We wake up the per-rcu_node kthread, which in turn
+ * will wake up the booster kthread.
+ */
+static void rcu_boost_kthread_timer(unsigned long arg)
+{
+ invoke_rcu_node_kthread((struct rcu_node *)arg);
+}
+
+/*
+ * Priority-boosting kthread. One per leaf rcu_node and one for the
+ * root rcu_node.
+ */
+static int rcu_boost_kthread(void *arg)
+{
+ struct rcu_node *rnp = (struct rcu_node *)arg;
+ int spincnt = 0;
+ int more2boost;
+
+ for (;;) {
+ rnp->boost_kthread_status = RCU_KTHREAD_WAITING;
+ wait_event_interruptible(rnp->boost_wq, rnp->boost_tasks ||
+ rnp->exp_tasks);
+ rnp->boost_kthread_status = RCU_KTHREAD_RUNNING;
+ more2boost = rcu_boost(rnp);
+ if (more2boost)
+ spincnt++;
+ else
+ spincnt = 0;
+ if (spincnt > 10) {
+ rcu_yield(rcu_boost_kthread_timer, (unsigned long)rnp);
+ spincnt = 0;
+ }
+ }
+ /* NOTREACHED */
+ return 0;
+}
+
+/*
+ * Check to see if it is time to start boosting RCU readers that are
+ * blocking the current grace period, and, if so, tell the per-rcu_node
+ * kthread to start boosting them. If there is an expedited grace
+ * period in progress, it is always time to boost.
+ *
+ * The caller must hold rnp->lock, which this function releases,
+ * but irqs remain disabled. The ->boost_kthread_task is immortal,
+ * so we don't need to worry about it going away.
+ */
+static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
+{
+ struct task_struct *t;
+
+ if (!rcu_preempt_blocked_readers_cgp(rnp) && rnp->exp_tasks == NULL) {
+ rnp->n_balk_exp_gp_tasks++;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ return;
+ }
+ if (rnp->exp_tasks != NULL ||
+ (rnp->gp_tasks != NULL &&
+ rnp->boost_tasks == NULL &&
+ rnp->qsmask == 0 &&
+ ULONG_CMP_GE(jiffies, rnp->boost_time))) {
+ if (rnp->exp_tasks == NULL)
+ rnp->boost_tasks = rnp->gp_tasks;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ t = rnp->boost_kthread_task;
+ if (t != NULL)
+ wake_up_process(t);
+ } else {
+ rcu_initiate_boost_trace(rnp);
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ }
+}
+
+/*
+ * Set the affinity of the boost kthread. The CPU-hotplug locks are
+ * held, so no one should be messing with the existence of the boost
+ * kthread.
+ */
+static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
+ cpumask_var_t cm)
+{
+ struct task_struct *t;
+
+ t = rnp->boost_kthread_task;
+ if (t != NULL)
+ set_cpus_allowed_ptr(rnp->boost_kthread_task, cm);
+}
+
+#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
+
+/*
+ * Do priority-boost accounting for the start of a new grace period.
+ */
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
+{
+ rnp->boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
+}
+
+/*
+ * Initialize the RCU-boost waitqueue.
+ */
+static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp)
+{
+ init_waitqueue_head(&rnp->boost_wq);
+}
+
+/*
+ * Create an RCU-boost kthread for the specified node if one does not
+ * already exist. We only create this kthread for preemptible RCU.
+ * Returns zero if all is well, a negated errno otherwise.
+ */
+static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ int rnp_index)
+{
+ unsigned long flags;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (&rcu_preempt_state != rsp)
+ return 0;
+ if (rnp->boost_kthread_task != NULL)
+ return 0;
+ t = kthread_create(rcu_boost_kthread, (void *)rnp,
+ "rcub%d", rnp_index);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ rnp->boost_kthread_task = t;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ wake_up_process(t);
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ return 0;
+}
+
+#else /* #ifdef CONFIG_RCU_BOOST */
+
+static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
+{
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+}
+
+static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
+ cpumask_var_t cm)
+{
+}
+
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
+{
+}
+
+static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp)
+{
+}
+
+static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ int rnp_index)
+{
+ return 0;
+}
+
+#endif /* #else #ifdef CONFIG_RCU_BOOST */
+
#ifndef CONFIG_SMP
void synchronize_sched_expedited(void)
@@ -1187,8 +1513,8 @@
*
* Because it is not legal to invoke rcu_process_callbacks() with irqs
* disabled, we do one pass of force_quiescent_state(), then do a
- * raise_softirq() to cause rcu_process_callbacks() to be invoked later.
- * The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * invoke_rcu_cpu_kthread() to cause rcu_process_callbacks() to be invoked
+ * later. The per-cpu rcu_dyntick_drain variable controls the sequencing.
*/
int rcu_needs_cpu(int cpu)
{
@@ -1239,7 +1565,7 @@
/* If RCU callbacks are still pending, RCU still needs this CPU. */
if (c)
- raise_softirq(RCU_SOFTIRQ);
+ invoke_rcu_cpu_kthread();
return c;
}
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index c8e9785..aa0fd72 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -46,6 +46,18 @@
#define RCU_TREE_NONCORE
#include "rcutree.h"
+DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
+DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_cpu);
+DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
+DECLARE_PER_CPU(char, rcu_cpu_has_work);
+
+static char convert_kthread_status(unsigned int kthread_status)
+{
+ if (kthread_status > RCU_KTHREAD_MAX)
+ return '?';
+ return "SRWOY"[kthread_status];
+}
+
static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
{
if (!rdp->beenonline)
@@ -64,7 +76,21 @@
rdp->dynticks_fqs);
#endif /* #ifdef CONFIG_NO_HZ */
seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi);
- seq_printf(m, " ql=%ld b=%ld", rdp->qlen, rdp->blimit);
+ seq_printf(m, " ql=%ld qs=%c%c%c%c kt=%d/%c/%d ktl=%x b=%ld",
+ rdp->qlen,
+ ".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
+ rdp->nxttail[RCU_NEXT_TAIL]],
+ ".R"[rdp->nxttail[RCU_WAIT_TAIL] !=
+ rdp->nxttail[RCU_NEXT_READY_TAIL]],
+ ".W"[rdp->nxttail[RCU_DONE_TAIL] !=
+ rdp->nxttail[RCU_WAIT_TAIL]],
+ ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+ per_cpu(rcu_cpu_has_work, rdp->cpu),
+ convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
+ rdp->cpu)),
+ per_cpu(rcu_cpu_kthread_cpu, rdp->cpu),
+ per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff,
+ rdp->blimit);
seq_printf(m, " ci=%lu co=%lu ca=%lu\n",
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
@@ -121,7 +147,18 @@
rdp->dynticks_fqs);
#endif /* #ifdef CONFIG_NO_HZ */
seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi);
- seq_printf(m, ",%ld,%ld", rdp->qlen, rdp->blimit);
+ seq_printf(m, ",%ld,\"%c%c%c%c\",%d,\"%c\",%ld", rdp->qlen,
+ ".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
+ rdp->nxttail[RCU_NEXT_TAIL]],
+ ".R"[rdp->nxttail[RCU_WAIT_TAIL] !=
+ rdp->nxttail[RCU_NEXT_READY_TAIL]],
+ ".W"[rdp->nxttail[RCU_DONE_TAIL] !=
+ rdp->nxttail[RCU_WAIT_TAIL]],
+ ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+ per_cpu(rcu_cpu_has_work, rdp->cpu),
+ convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
+ rdp->cpu)),
+ rdp->blimit);
seq_printf(m, ",%lu,%lu,%lu\n",
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
@@ -157,11 +194,76 @@
.release = single_release,
};
+#ifdef CONFIG_RCU_BOOST
+
+static void print_one_rcu_node_boost(struct seq_file *m, struct rcu_node *rnp)
+{
+ seq_printf(m, "%d:%d tasks=%c%c%c%c kt=%c ntb=%lu neb=%lu nnb=%lu "
+ "j=%04x bt=%04x\n",
+ rnp->grplo, rnp->grphi,
+ "T."[list_empty(&rnp->blkd_tasks)],
+ "N."[!rnp->gp_tasks],
+ "E."[!rnp->exp_tasks],
+ "B."[!rnp->boost_tasks],
+ convert_kthread_status(rnp->boost_kthread_status),
+ rnp->n_tasks_boosted, rnp->n_exp_boosts,
+ rnp->n_normal_boosts,
+ (int)(jiffies & 0xffff),
+ (int)(rnp->boost_time & 0xffff));
+ seq_printf(m, "%s: nt=%lu egt=%lu bt=%lu nb=%lu ny=%lu nos=%lu\n",
+ " balk",
+ rnp->n_balk_blkd_tasks,
+ rnp->n_balk_exp_gp_tasks,
+ rnp->n_balk_boost_tasks,
+ rnp->n_balk_notblocked,
+ rnp->n_balk_notyet,
+ rnp->n_balk_nos);
+}
+
+static int show_rcu_node_boost(struct seq_file *m, void *unused)
+{
+ struct rcu_node *rnp;
+
+ rcu_for_each_leaf_node(&rcu_preempt_state, rnp)
+ print_one_rcu_node_boost(m, rnp);
+ return 0;
+}
+
+static int rcu_node_boost_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_rcu_node_boost, NULL);
+}
+
+static const struct file_operations rcu_node_boost_fops = {
+ .owner = THIS_MODULE,
+ .open = rcu_node_boost_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * Create the rcuboost debugfs entry. Standard error return.
+ */
+static int rcu_boost_trace_create_file(struct dentry *rcudir)
+{
+ return !debugfs_create_file("rcuboost", 0444, rcudir, NULL,
+ &rcu_node_boost_fops);
+}
+
+#else /* #ifdef CONFIG_RCU_BOOST */
+
+static int rcu_boost_trace_create_file(struct dentry *rcudir)
+{
+ return 0; /* There cannot be an error if we didn't create it! */
+}
+
+#endif /* #else #ifdef CONFIG_RCU_BOOST */
+
static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
{
unsigned long gpnum;
int level = 0;
- int phase;
struct rcu_node *rnp;
gpnum = rsp->gpnum;
@@ -178,13 +280,11 @@
seq_puts(m, "\n");
level = rnp->level;
}
- phase = gpnum & 0x1;
- seq_printf(m, "%lx/%lx %c%c>%c%c %d:%d ^%d ",
+ seq_printf(m, "%lx/%lx %c%c>%c %d:%d ^%d ",
rnp->qsmask, rnp->qsmaskinit,
- "T."[list_empty(&rnp->blocked_tasks[phase])],
- "E."[list_empty(&rnp->blocked_tasks[phase + 2])],
- "T."[list_empty(&rnp->blocked_tasks[!phase])],
- "E."[list_empty(&rnp->blocked_tasks[!phase + 2])],
+ ".G"[rnp->gp_tasks != NULL],
+ ".E"[rnp->exp_tasks != NULL],
+ ".T"[!list_empty(&rnp->blkd_tasks)],
rnp->grplo, rnp->grphi, rnp->grpnum);
}
seq_puts(m, "\n");
@@ -216,16 +316,35 @@
.release = single_release,
};
+static void show_one_rcugp(struct seq_file *m, struct rcu_state *rsp)
+{
+ unsigned long flags;
+ unsigned long completed;
+ unsigned long gpnum;
+ unsigned long gpage;
+ unsigned long gpmax;
+ struct rcu_node *rnp = &rsp->node[0];
+
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ completed = rsp->completed;
+ gpnum = rsp->gpnum;
+ if (rsp->completed == rsp->gpnum)
+ gpage = 0;
+ else
+ gpage = jiffies - rsp->gp_start;
+ gpmax = rsp->gp_max;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ seq_printf(m, "%s: completed=%ld gpnum=%lu age=%ld max=%ld\n",
+ rsp->name, completed, gpnum, gpage, gpmax);
+}
+
static int show_rcugp(struct seq_file *m, void *unused)
{
#ifdef CONFIG_TREE_PREEMPT_RCU
- seq_printf(m, "rcu_preempt: completed=%ld gpnum=%lu\n",
- rcu_preempt_state.completed, rcu_preempt_state.gpnum);
+ show_one_rcugp(m, &rcu_preempt_state);
#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
- seq_printf(m, "rcu_sched: completed=%ld gpnum=%lu\n",
- rcu_sched_state.completed, rcu_sched_state.gpnum);
- seq_printf(m, "rcu_bh: completed=%ld gpnum=%lu\n",
- rcu_bh_state.completed, rcu_bh_state.gpnum);
+ show_one_rcugp(m, &rcu_sched_state);
+ show_one_rcugp(m, &rcu_bh_state);
return 0;
}
@@ -298,6 +417,29 @@
.release = single_release,
};
+static int show_rcutorture(struct seq_file *m, void *unused)
+{
+ seq_printf(m, "rcutorture test sequence: %lu %s\n",
+ rcutorture_testseq >> 1,
+ (rcutorture_testseq & 0x1) ? "(test in progress)" : "");
+ seq_printf(m, "rcutorture update version number: %lu\n",
+ rcutorture_vernum);
+ return 0;
+}
+
+static int rcutorture_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_rcutorture, NULL);
+}
+
+static const struct file_operations rcutorture_fops = {
+ .owner = THIS_MODULE,
+ .open = rcutorture_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static struct dentry *rcudir;
static int __init rcutree_trace_init(void)
@@ -318,6 +460,9 @@
if (!retval)
goto free_out;
+ if (rcu_boost_trace_create_file(rcudir))
+ goto free_out;
+
retval = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
if (!retval)
goto free_out;
@@ -331,6 +476,11 @@
NULL, &rcu_pending_fops);
if (!retval)
goto free_out;
+
+ retval = debugfs_create_file("rcutorture", 0444, rcudir,
+ NULL, &rcutorture_fops);
+ if (!retval)
+ goto free_out;
return 0;
free_out:
debugfs_remove_recursive(rcudir);
diff --git a/kernel/sched.c b/kernel/sched.c
index 312f8b9..c62acf4 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -231,7 +231,7 @@
#endif
/*
- * sched_domains_mutex serializes calls to arch_init_sched_domains,
+ * sched_domains_mutex serializes calls to init_sched_domains,
* detach_destroy_domains and partition_sched_domains.
*/
static DEFINE_MUTEX(sched_domains_mutex);
@@ -312,6 +312,9 @@
u64 exec_clock;
u64 min_vruntime;
+#ifndef CONFIG_64BIT
+ u64 min_vruntime_copy;
+#endif
struct rb_root tasks_timeline;
struct rb_node *rb_leftmost;
@@ -325,7 +328,9 @@
*/
struct sched_entity *curr, *next, *last, *skip;
+#ifdef CONFIG_SCHED_DEBUG
unsigned int nr_spread_over;
+#endif
#ifdef CONFIG_FAIR_GROUP_SCHED
struct rq *rq; /* cpu runqueue to which this cfs_rq is attached */
@@ -417,6 +422,7 @@
*/
struct root_domain {
atomic_t refcount;
+ struct rcu_head rcu;
cpumask_var_t span;
cpumask_var_t online;
@@ -460,7 +466,7 @@
u64 nohz_stamp;
unsigned char nohz_balance_kick;
#endif
- unsigned int skip_clock_update;
+ int skip_clock_update;
/* capture load from *all* tasks on this cpu: */
struct load_weight load;
@@ -553,6 +559,10 @@
unsigned int ttwu_count;
unsigned int ttwu_local;
#endif
+
+#ifdef CONFIG_SMP
+ struct task_struct *wake_list;
+#endif
};
static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
@@ -571,7 +581,7 @@
#define rcu_dereference_check_sched_domain(p) \
rcu_dereference_check((p), \
- rcu_read_lock_sched_held() || \
+ rcu_read_lock_held() || \
lockdep_is_held(&sched_domains_mutex))
/*
@@ -596,7 +606,7 @@
* Return the group to which this tasks belongs.
*
* We use task_subsys_state_check() and extend the RCU verification
- * with lockdep_is_held(&task_rq(p)->lock) because cpu_cgroup_attach()
+ * with lockdep_is_held(&p->pi_lock) because cpu_cgroup_attach()
* holds that lock for each task it moves into the cgroup. Therefore
* by holding that lock, we pin the task to the current cgroup.
*/
@@ -606,7 +616,7 @@
struct cgroup_subsys_state *css;
css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
- lockdep_is_held(&task_rq(p)->lock));
+ lockdep_is_held(&p->pi_lock));
tg = container_of(css, struct task_group, css);
return autogroup_task_group(p, tg);
@@ -642,7 +652,7 @@
{
s64 delta;
- if (rq->skip_clock_update)
+ if (rq->skip_clock_update > 0)
return;
delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
@@ -838,18 +848,39 @@
return rq->curr == p;
}
-#ifndef __ARCH_WANT_UNLOCKED_CTXSW
static inline int task_running(struct rq *rq, struct task_struct *p)
{
+#ifdef CONFIG_SMP
+ return p->on_cpu;
+#else
return task_current(rq, p);
+#endif
}
+#ifndef __ARCH_WANT_UNLOCKED_CTXSW
static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
{
+#ifdef CONFIG_SMP
+ /*
+ * We can optimise this out completely for !SMP, because the
+ * SMP rebalancing from interrupt is the only thing that cares
+ * here.
+ */
+ next->on_cpu = 1;
+#endif
}
static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
{
+#ifdef CONFIG_SMP
+ /*
+ * After ->on_cpu is cleared, the task can be moved to a different CPU.
+ * We must ensure this doesn't happen until the switch is completely
+ * finished.
+ */
+ smp_wmb();
+ prev->on_cpu = 0;
+#endif
#ifdef CONFIG_DEBUG_SPINLOCK
/* this is a valid case when another task releases the spinlock */
rq->lock.owner = current;
@@ -865,15 +896,6 @@
}
#else /* __ARCH_WANT_UNLOCKED_CTXSW */
-static inline int task_running(struct rq *rq, struct task_struct *p)
-{
-#ifdef CONFIG_SMP
- return p->oncpu;
-#else
- return task_current(rq, p);
-#endif
-}
-
static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
{
#ifdef CONFIG_SMP
@@ -882,7 +904,7 @@
* SMP rebalancing from interrupt is the only thing that cares
* here.
*/
- next->oncpu = 1;
+ next->on_cpu = 1;
#endif
#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
raw_spin_unlock_irq(&rq->lock);
@@ -895,12 +917,12 @@
{
#ifdef CONFIG_SMP
/*
- * After ->oncpu is cleared, the task can be moved to a different CPU.
+ * After ->on_cpu is cleared, the task can be moved to a different CPU.
* We must ensure this doesn't happen until the switch is completely
* finished.
*/
smp_wmb();
- prev->oncpu = 0;
+ prev->on_cpu = 0;
#endif
#ifndef __ARCH_WANT_INTERRUPTS_ON_CTXSW
local_irq_enable();
@@ -909,23 +931,15 @@
#endif /* __ARCH_WANT_UNLOCKED_CTXSW */
/*
- * Check whether the task is waking, we use this to synchronize ->cpus_allowed
- * against ttwu().
- */
-static inline int task_is_waking(struct task_struct *p)
-{
- return unlikely(p->state == TASK_WAKING);
-}
-
-/*
- * __task_rq_lock - lock the runqueue a given task resides on.
- * Must be called interrupts disabled.
+ * __task_rq_lock - lock the rq @p resides on.
*/
static inline struct rq *__task_rq_lock(struct task_struct *p)
__acquires(rq->lock)
{
struct rq *rq;
+ lockdep_assert_held(&p->pi_lock);
+
for (;;) {
rq = task_rq(p);
raw_spin_lock(&rq->lock);
@@ -936,22 +950,22 @@
}
/*
- * task_rq_lock - lock the runqueue a given task resides on and disable
- * interrupts. Note the ordering: we can safely lookup the task_rq without
- * explicitly disabling preemption.
+ * task_rq_lock - lock p->pi_lock and lock the rq @p resides on.
*/
static struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags)
+ __acquires(p->pi_lock)
__acquires(rq->lock)
{
struct rq *rq;
for (;;) {
- local_irq_save(*flags);
+ raw_spin_lock_irqsave(&p->pi_lock, *flags);
rq = task_rq(p);
raw_spin_lock(&rq->lock);
if (likely(rq == task_rq(p)))
return rq;
- raw_spin_unlock_irqrestore(&rq->lock, *flags);
+ raw_spin_unlock(&rq->lock);
+ raw_spin_unlock_irqrestore(&p->pi_lock, *flags);
}
}
@@ -961,10 +975,13 @@
raw_spin_unlock(&rq->lock);
}
-static inline void task_rq_unlock(struct rq *rq, unsigned long *flags)
+static inline void
+task_rq_unlock(struct rq *rq, struct task_struct *p, unsigned long *flags)
__releases(rq->lock)
+ __releases(p->pi_lock)
{
- raw_spin_unlock_irqrestore(&rq->lock, *flags);
+ raw_spin_unlock(&rq->lock);
+ raw_spin_unlock_irqrestore(&p->pi_lock, *flags);
}
/*
@@ -1193,11 +1210,17 @@
int i;
struct sched_domain *sd;
+ rcu_read_lock();
for_each_domain(cpu, sd) {
- for_each_cpu(i, sched_domain_span(sd))
- if (!idle_cpu(i))
- return i;
+ for_each_cpu(i, sched_domain_span(sd)) {
+ if (!idle_cpu(i)) {
+ cpu = i;
+ goto unlock;
+ }
+ }
}
+unlock:
+ rcu_read_unlock();
return cpu;
}
/*
@@ -1307,15 +1330,15 @@
{
u64 tmp;
+ tmp = (u64)delta_exec * weight;
+
if (!lw->inv_weight) {
if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST))
lw->inv_weight = 1;
else
- lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)
- / (lw->weight+1);
+ lw->inv_weight = WMULT_CONST / lw->weight;
}
- tmp = (u64)delta_exec * weight;
/*
* Check whether we'd overflow the 64-bit multiplication:
*/
@@ -1773,7 +1796,6 @@
update_rq_clock(rq);
sched_info_queued(p);
p->sched_class->enqueue_task(rq, p, flags);
- p->se.on_rq = 1;
}
static void dequeue_task(struct rq *rq, struct task_struct *p, int flags)
@@ -1781,7 +1803,6 @@
update_rq_clock(rq);
sched_info_dequeued(p);
p->sched_class->dequeue_task(rq, p, flags);
- p->se.on_rq = 0;
}
/*
@@ -2116,7 +2137,7 @@
* A queue event has occurred, and we're going to schedule. In
* this case, we can save a useless back to back clock update.
*/
- if (rq->curr->se.on_rq && test_tsk_need_resched(rq->curr))
+ if (rq->curr->on_rq && test_tsk_need_resched(rq->curr))
rq->skip_clock_update = 1;
}
@@ -2162,6 +2183,11 @@
*/
WARN_ON_ONCE(p->state != TASK_RUNNING && p->state != TASK_WAKING &&
!(task_thread_info(p)->preempt_count & PREEMPT_ACTIVE));
+
+#ifdef CONFIG_LOCKDEP
+ WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) ||
+ lockdep_is_held(&task_rq(p)->lock)));
+#endif
#endif
trace_sched_migrate_task(p, new_cpu);
@@ -2182,19 +2208,6 @@
static int migration_cpu_stop(void *data);
/*
- * The task's runqueue lock must be held.
- * Returns true if you have to wait for migration thread.
- */
-static bool migrate_task(struct task_struct *p, struct rq *rq)
-{
- /*
- * If the task is not on a runqueue (and not running), then
- * the next wake-up will properly place the task.
- */
- return p->se.on_rq || task_running(rq, p);
-}
-
-/*
* wait_task_inactive - wait for a thread to unschedule.
*
* If @match_state is nonzero, it's the @p->state value just checked and
@@ -2251,11 +2264,11 @@
rq = task_rq_lock(p, &flags);
trace_sched_wait_task(p);
running = task_running(rq, p);
- on_rq = p->se.on_rq;
+ on_rq = p->on_rq;
ncsw = 0;
if (!match_state || p->state == match_state)
ncsw = p->nvcsw | LONG_MIN; /* sets MSB */
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
/*
* If it changed from the expected state, bail out now.
@@ -2330,7 +2343,7 @@
#ifdef CONFIG_SMP
/*
- * ->cpus_allowed is protected by either TASK_WAKING or rq->lock held.
+ * ->cpus_allowed is protected by both rq->lock and p->pi_lock
*/
static int select_fallback_rq(int cpu, struct task_struct *p)
{
@@ -2363,12 +2376,12 @@
}
/*
- * The caller (fork, wakeup) owns TASK_WAKING, ->cpus_allowed is stable.
+ * The caller (fork, wakeup) owns p->pi_lock, ->cpus_allowed is stable.
*/
static inline
-int select_task_rq(struct rq *rq, struct task_struct *p, int sd_flags, int wake_flags)
+int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags)
{
- int cpu = p->sched_class->select_task_rq(rq, p, sd_flags, wake_flags);
+ int cpu = p->sched_class->select_task_rq(p, sd_flags, wake_flags);
/*
* In order not to call set_task_cpu() on a blocking task we need
@@ -2394,27 +2407,62 @@
}
#endif
-static inline void ttwu_activate(struct task_struct *p, struct rq *rq,
- bool is_sync, bool is_migrate, bool is_local,
- unsigned long en_flags)
+static void
+ttwu_stat(struct task_struct *p, int cpu, int wake_flags)
{
- schedstat_inc(p, se.statistics.nr_wakeups);
- if (is_sync)
- schedstat_inc(p, se.statistics.nr_wakeups_sync);
- if (is_migrate)
- schedstat_inc(p, se.statistics.nr_wakeups_migrate);
- if (is_local)
- schedstat_inc(p, se.statistics.nr_wakeups_local);
- else
- schedstat_inc(p, se.statistics.nr_wakeups_remote);
+#ifdef CONFIG_SCHEDSTATS
+ struct rq *rq = this_rq();
- activate_task(rq, p, en_flags);
+#ifdef CONFIG_SMP
+ int this_cpu = smp_processor_id();
+
+ if (cpu == this_cpu) {
+ schedstat_inc(rq, ttwu_local);
+ schedstat_inc(p, se.statistics.nr_wakeups_local);
+ } else {
+ struct sched_domain *sd;
+
+ schedstat_inc(p, se.statistics.nr_wakeups_remote);
+ rcu_read_lock();
+ for_each_domain(this_cpu, sd) {
+ if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
+ schedstat_inc(sd, ttwu_wake_remote);
+ break;
+ }
+ }
+ rcu_read_unlock();
+ }
+#endif /* CONFIG_SMP */
+
+ schedstat_inc(rq, ttwu_count);
+ schedstat_inc(p, se.statistics.nr_wakeups);
+
+ if (wake_flags & WF_SYNC)
+ schedstat_inc(p, se.statistics.nr_wakeups_sync);
+
+ if (cpu != task_cpu(p))
+ schedstat_inc(p, se.statistics.nr_wakeups_migrate);
+
+#endif /* CONFIG_SCHEDSTATS */
}
-static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq,
- int wake_flags, bool success)
+static void ttwu_activate(struct rq *rq, struct task_struct *p, int en_flags)
{
- trace_sched_wakeup(p, success);
+ activate_task(rq, p, en_flags);
+ p->on_rq = 1;
+
+ /* if a worker is waking up, notify workqueue */
+ if (p->flags & PF_WQ_WORKER)
+ wq_worker_waking_up(p, cpu_of(rq));
+}
+
+/*
+ * Mark the task runnable and perform wakeup-preemption.
+ */
+static void
+ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags)
+{
+ trace_sched_wakeup(p, true);
check_preempt_curr(rq, p, wake_flags);
p->state = TASK_RUNNING;
@@ -2433,9 +2481,99 @@
rq->idle_stamp = 0;
}
#endif
- /* if a worker is waking up, notify workqueue */
- if ((p->flags & PF_WQ_WORKER) && success)
- wq_worker_waking_up(p, cpu_of(rq));
+}
+
+static void
+ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags)
+{
+#ifdef CONFIG_SMP
+ if (p->sched_contributes_to_load)
+ rq->nr_uninterruptible--;
+#endif
+
+ ttwu_activate(rq, p, ENQUEUE_WAKEUP | ENQUEUE_WAKING);
+ ttwu_do_wakeup(rq, p, wake_flags);
+}
+
+/*
+ * Called in case the task @p isn't fully descheduled from its runqueue,
+ * in this case we must do a remote wakeup. Its a 'light' wakeup though,
+ * since all we need to do is flip p->state to TASK_RUNNING, since
+ * the task is still ->on_rq.
+ */
+static int ttwu_remote(struct task_struct *p, int wake_flags)
+{
+ struct rq *rq;
+ int ret = 0;
+
+ rq = __task_rq_lock(p);
+ if (p->on_rq) {
+ ttwu_do_wakeup(rq, p, wake_flags);
+ ret = 1;
+ }
+ __task_rq_unlock(rq);
+
+ return ret;
+}
+
+#ifdef CONFIG_SMP
+static void sched_ttwu_pending(void)
+{
+ struct rq *rq = this_rq();
+ struct task_struct *list = xchg(&rq->wake_list, NULL);
+
+ if (!list)
+ return;
+
+ raw_spin_lock(&rq->lock);
+
+ while (list) {
+ struct task_struct *p = list;
+ list = list->wake_entry;
+ ttwu_do_activate(rq, p, 0);
+ }
+
+ raw_spin_unlock(&rq->lock);
+}
+
+void scheduler_ipi(void)
+{
+ sched_ttwu_pending();
+}
+
+static void ttwu_queue_remote(struct task_struct *p, int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ struct task_struct *next = rq->wake_list;
+
+ for (;;) {
+ struct task_struct *old = next;
+
+ p->wake_entry = next;
+ next = cmpxchg(&rq->wake_list, old, p);
+ if (next == old)
+ break;
+ }
+
+ if (!next)
+ smp_send_reschedule(cpu);
+}
+#endif
+
+static void ttwu_queue(struct task_struct *p, int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_SCHED_TTWU_QUEUE)
+ if (sched_feat(TTWU_QUEUE) && cpu != smp_processor_id()) {
+ ttwu_queue_remote(p, cpu);
+ return;
+ }
+#endif
+
+ raw_spin_lock(&rq->lock);
+ ttwu_do_activate(rq, p, 0);
+ raw_spin_unlock(&rq->lock);
}
/**
@@ -2453,92 +2591,64 @@
* Returns %true if @p was woken up, %false if it was already running
* or @state didn't match @p's state.
*/
-static int try_to_wake_up(struct task_struct *p, unsigned int state,
- int wake_flags)
+static int
+try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
{
- int cpu, orig_cpu, this_cpu, success = 0;
unsigned long flags;
- unsigned long en_flags = ENQUEUE_WAKEUP;
- struct rq *rq;
-
- this_cpu = get_cpu();
+ int cpu, success = 0;
smp_wmb();
- rq = task_rq_lock(p, &flags);
+ raw_spin_lock_irqsave(&p->pi_lock, flags);
if (!(p->state & state))
goto out;
- if (p->se.on_rq)
- goto out_running;
-
+ success = 1; /* we're going to change ->state */
cpu = task_cpu(p);
- orig_cpu = cpu;
+
+ if (p->on_rq && ttwu_remote(p, wake_flags))
+ goto stat;
#ifdef CONFIG_SMP
- if (unlikely(task_running(rq, p)))
- goto out_activate;
-
/*
- * In order to handle concurrent wakeups and release the rq->lock
- * we put the task in TASK_WAKING state.
- *
- * First fix up the nr_uninterruptible count:
+ * If the owning (remote) cpu is still in the middle of schedule() with
+ * this task as prev, wait until its done referencing the task.
*/
- if (task_contributes_to_load(p)) {
- if (likely(cpu_online(orig_cpu)))
- rq->nr_uninterruptible--;
- else
- this_rq()->nr_uninterruptible--;
+ while (p->on_cpu) {
+#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
+ /*
+ * If called from interrupt context we could have landed in the
+ * middle of schedule(), in this case we should take care not
+ * to spin on ->on_cpu if p is current, since that would
+ * deadlock.
+ */
+ if (p == current) {
+ ttwu_queue(p, cpu);
+ goto stat;
+ }
+#endif
+ cpu_relax();
}
+ /*
+ * Pairs with the smp_wmb() in finish_lock_switch().
+ */
+ smp_rmb();
+
+ p->sched_contributes_to_load = !!task_contributes_to_load(p);
p->state = TASK_WAKING;
- if (p->sched_class->task_waking) {
- p->sched_class->task_waking(rq, p);
- en_flags |= ENQUEUE_WAKING;
- }
+ if (p->sched_class->task_waking)
+ p->sched_class->task_waking(p);
- cpu = select_task_rq(rq, p, SD_BALANCE_WAKE, wake_flags);
- if (cpu != orig_cpu)
+ cpu = select_task_rq(p, SD_BALANCE_WAKE, wake_flags);
+ if (task_cpu(p) != cpu)
set_task_cpu(p, cpu);
- __task_rq_unlock(rq);
-
- rq = cpu_rq(cpu);
- raw_spin_lock(&rq->lock);
-
- /*
- * We migrated the task without holding either rq->lock, however
- * since the task is not on the task list itself, nobody else
- * will try and migrate the task, hence the rq should match the
- * cpu we just moved it to.
- */
- WARN_ON(task_cpu(p) != cpu);
- WARN_ON(p->state != TASK_WAKING);
-
-#ifdef CONFIG_SCHEDSTATS
- schedstat_inc(rq, ttwu_count);
- if (cpu == this_cpu)
- schedstat_inc(rq, ttwu_local);
- else {
- struct sched_domain *sd;
- for_each_domain(this_cpu, sd) {
- if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
- schedstat_inc(sd, ttwu_wake_remote);
- break;
- }
- }
- }
-#endif /* CONFIG_SCHEDSTATS */
-
-out_activate:
#endif /* CONFIG_SMP */
- ttwu_activate(p, rq, wake_flags & WF_SYNC, orig_cpu != cpu,
- cpu == this_cpu, en_flags);
- success = 1;
-out_running:
- ttwu_post_activation(p, rq, wake_flags, success);
+
+ ttwu_queue(p, cpu);
+stat:
+ ttwu_stat(p, cpu, wake_flags);
out:
- task_rq_unlock(rq, &flags);
- put_cpu();
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
return success;
}
@@ -2547,31 +2657,34 @@
* try_to_wake_up_local - try to wake up a local task with rq lock held
* @p: the thread to be awakened
*
- * Put @p on the run-queue if it's not already there. The caller must
+ * Put @p on the run-queue if it's not already there. The caller must
* ensure that this_rq() is locked, @p is bound to this_rq() and not
- * the current task. this_rq() stays locked over invocation.
+ * the current task.
*/
static void try_to_wake_up_local(struct task_struct *p)
{
struct rq *rq = task_rq(p);
- bool success = false;
BUG_ON(rq != this_rq());
BUG_ON(p == current);
lockdep_assert_held(&rq->lock);
- if (!(p->state & TASK_NORMAL))
- return;
-
- if (!p->se.on_rq) {
- if (likely(!task_running(rq, p))) {
- schedstat_inc(rq, ttwu_count);
- schedstat_inc(rq, ttwu_local);
- }
- ttwu_activate(p, rq, false, false, true, ENQUEUE_WAKEUP);
- success = true;
+ if (!raw_spin_trylock(&p->pi_lock)) {
+ raw_spin_unlock(&rq->lock);
+ raw_spin_lock(&p->pi_lock);
+ raw_spin_lock(&rq->lock);
}
- ttwu_post_activation(p, rq, 0, success);
+
+ if (!(p->state & TASK_NORMAL))
+ goto out;
+
+ if (!p->on_rq)
+ ttwu_activate(rq, p, ENQUEUE_WAKEUP);
+
+ ttwu_do_wakeup(rq, p, 0);
+ ttwu_stat(p, smp_processor_id(), 0);
+out:
+ raw_spin_unlock(&p->pi_lock);
}
/**
@@ -2604,19 +2717,21 @@
*/
static void __sched_fork(struct task_struct *p)
{
+ p->on_rq = 0;
+
+ p->se.on_rq = 0;
p->se.exec_start = 0;
p->se.sum_exec_runtime = 0;
p->se.prev_sum_exec_runtime = 0;
p->se.nr_migrations = 0;
p->se.vruntime = 0;
+ INIT_LIST_HEAD(&p->se.group_node);
#ifdef CONFIG_SCHEDSTATS
memset(&p->se.statistics, 0, sizeof(p->se.statistics));
#endif
INIT_LIST_HEAD(&p->rt.run_list);
- p->se.on_rq = 0;
- INIT_LIST_HEAD(&p->se.group_node);
#ifdef CONFIG_PREEMPT_NOTIFIERS
INIT_HLIST_HEAD(&p->preempt_notifiers);
@@ -2626,8 +2741,9 @@
/*
* fork()/clone()-time setup:
*/
-void sched_fork(struct task_struct *p, int clone_flags)
+void sched_fork(struct task_struct *p)
{
+ unsigned long flags;
int cpu = get_cpu();
__sched_fork(p);
@@ -2678,16 +2794,16 @@
*
* Silence PROVE_RCU.
*/
- rcu_read_lock();
+ raw_spin_lock_irqsave(&p->pi_lock, flags);
set_task_cpu(p, cpu);
- rcu_read_unlock();
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
if (likely(sched_info_on()))
memset(&p->sched_info, 0, sizeof(p->sched_info));
#endif
-#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
- p->oncpu = 0;
+#if defined(CONFIG_SMP)
+ p->on_cpu = 0;
#endif
#ifdef CONFIG_PREEMPT
/* Want to start with kernel preemption disabled. */
@@ -2707,41 +2823,31 @@
* that must be done for every newly created context, then puts the task
* on the runqueue and wakes it.
*/
-void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
+void wake_up_new_task(struct task_struct *p)
{
unsigned long flags;
struct rq *rq;
- int cpu __maybe_unused = get_cpu();
+ raw_spin_lock_irqsave(&p->pi_lock, flags);
#ifdef CONFIG_SMP
- rq = task_rq_lock(p, &flags);
- p->state = TASK_WAKING;
-
/*
* Fork balancing, do it here and not earlier because:
* - cpus_allowed can change in the fork path
* - any previously selected cpu might disappear through hotplug
- *
- * We set TASK_WAKING so that select_task_rq() can drop rq->lock
- * without people poking at ->cpus_allowed.
*/
- cpu = select_task_rq(rq, p, SD_BALANCE_FORK, 0);
- set_task_cpu(p, cpu);
-
- p->state = TASK_RUNNING;
- task_rq_unlock(rq, &flags);
+ set_task_cpu(p, select_task_rq(p, SD_BALANCE_FORK, 0));
#endif
- rq = task_rq_lock(p, &flags);
+ rq = __task_rq_lock(p);
activate_task(rq, p, 0);
- trace_sched_wakeup_new(p, 1);
+ p->on_rq = 1;
+ trace_sched_wakeup_new(p, true);
check_preempt_curr(rq, p, WF_FORK);
#ifdef CONFIG_SMP
if (p->sched_class->task_woken)
p->sched_class->task_woken(rq, p);
#endif
- task_rq_unlock(rq, &flags);
- put_cpu();
+ task_rq_unlock(rq, p, &flags);
}
#ifdef CONFIG_PREEMPT_NOTIFIERS
@@ -3450,27 +3556,22 @@
{
struct task_struct *p = current;
unsigned long flags;
- struct rq *rq;
int dest_cpu;
- rq = task_rq_lock(p, &flags);
- dest_cpu = p->sched_class->select_task_rq(rq, p, SD_BALANCE_EXEC, 0);
+ raw_spin_lock_irqsave(&p->pi_lock, flags);
+ dest_cpu = p->sched_class->select_task_rq(p, SD_BALANCE_EXEC, 0);
if (dest_cpu == smp_processor_id())
goto unlock;
- /*
- * select_task_rq() can race against ->cpus_allowed
- */
- if (cpumask_test_cpu(dest_cpu, &p->cpus_allowed) &&
- likely(cpu_active(dest_cpu)) && migrate_task(p, rq)) {
+ if (likely(cpu_active(dest_cpu))) {
struct migration_arg arg = { p, dest_cpu };
- task_rq_unlock(rq, &flags);
- stop_one_cpu(cpu_of(rq), migration_cpu_stop, &arg);
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ stop_one_cpu(task_cpu(p), migration_cpu_stop, &arg);
return;
}
unlock:
- task_rq_unlock(rq, &flags);
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
}
#endif
@@ -3507,7 +3608,7 @@
rq = task_rq_lock(p, &flags);
ns = do_task_delta_exec(p, rq);
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
return ns;
}
@@ -3525,7 +3626,7 @@
rq = task_rq_lock(p, &flags);
ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq);
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
return ns;
}
@@ -3549,7 +3650,7 @@
rq = task_rq_lock(p, &flags);
thread_group_cputime(p, &totals);
ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
return ns;
}
@@ -3903,9 +4004,6 @@
/*
* This function gets called by the timer code, with HZ frequency.
* We call it with interrupts disabled.
- *
- * It also gets called by the fork code, when changing the parent's
- * timeslices.
*/
void scheduler_tick(void)
{
@@ -4025,17 +4123,11 @@
profile_hit(SCHED_PROFILING, __builtin_return_address(0));
schedstat_inc(this_rq(), sched_count);
-#ifdef CONFIG_SCHEDSTATS
- if (unlikely(prev->lock_depth >= 0)) {
- schedstat_inc(this_rq(), rq_sched_info.bkl_count);
- schedstat_inc(prev, sched_info.bkl_count);
- }
-#endif
}
static void put_prev_task(struct rq *rq, struct task_struct *prev)
{
- if (prev->se.on_rq)
+ if (prev->on_rq || rq->skip_clock_update < 0)
update_rq_clock(rq);
prev->sched_class->put_prev_task(rq, prev);
}
@@ -4097,11 +4189,13 @@
if (unlikely(signal_pending_state(prev->state, prev))) {
prev->state = TASK_RUNNING;
} else {
+ deactivate_task(rq, prev, DEQUEUE_SLEEP);
+ prev->on_rq = 0;
+
/*
- * If a worker is going to sleep, notify and
- * ask workqueue whether it wants to wake up a
- * task to maintain concurrency. If so, wake
- * up the task.
+ * If a worker went to sleep, notify and ask workqueue
+ * whether it wants to wake up a task to maintain
+ * concurrency.
*/
if (prev->flags & PF_WQ_WORKER) {
struct task_struct *to_wakeup;
@@ -4110,11 +4204,10 @@
if (to_wakeup)
try_to_wake_up_local(to_wakeup);
}
- deactivate_task(rq, prev, DEQUEUE_SLEEP);
/*
- * If we are going to sleep and we have plugged IO queued, make
- * sure to submit it to avoid deadlocks.
+ * If we are going to sleep and we have plugged IO
+ * queued, make sure to submit it to avoid deadlocks.
*/
if (blk_needs_flush_plug(prev)) {
raw_spin_unlock(&rq->lock);
@@ -4161,70 +4254,53 @@
EXPORT_SYMBOL(schedule);
#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
+
+static inline bool owner_running(struct mutex *lock, struct task_struct *owner)
+{
+ bool ret = false;
+
+ rcu_read_lock();
+ if (lock->owner != owner)
+ goto fail;
+
+ /*
+ * Ensure we emit the owner->on_cpu, dereference _after_ checking
+ * lock->owner still matches owner, if that fails, owner might
+ * point to free()d memory, if it still matches, the rcu_read_lock()
+ * ensures the memory stays valid.
+ */
+ barrier();
+
+ ret = owner->on_cpu;
+fail:
+ rcu_read_unlock();
+
+ return ret;
+}
+
/*
* Look out! "owner" is an entirely speculative pointer
* access and not reliable.
*/
-int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner)
+int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner)
{
- unsigned int cpu;
- struct rq *rq;
-
if (!sched_feat(OWNER_SPIN))
return 0;
-#ifdef CONFIG_DEBUG_PAGEALLOC
- /*
- * Need to access the cpu field knowing that
- * DEBUG_PAGEALLOC could have unmapped it if
- * the mutex owner just released it and exited.
- */
- if (probe_kernel_address(&owner->cpu, cpu))
- return 0;
-#else
- cpu = owner->cpu;
-#endif
-
- /*
- * Even if the access succeeded (likely case),
- * the cpu field may no longer be valid.
- */
- if (cpu >= nr_cpumask_bits)
- return 0;
-
- /*
- * We need to validate that we can do a
- * get_cpu() and that we have the percpu area.
- */
- if (!cpu_online(cpu))
- return 0;
-
- rq = cpu_rq(cpu);
-
- for (;;) {
- /*
- * Owner changed, break to re-assess state.
- */
- if (lock->owner != owner) {
- /*
- * If the lock has switched to a different owner,
- * we likely have heavy contention. Return 0 to quit
- * optimistic spinning and not contend further:
- */
- if (lock->owner)
- return 0;
- break;
- }
-
- /*
- * Is that owner really running on that cpu?
- */
- if (task_thread_info(rq->curr) != owner || need_resched())
+ while (owner_running(lock, owner)) {
+ if (need_resched())
return 0;
arch_mutex_cpu_relax();
}
+ /*
+ * If the owner changed to another task there is likely
+ * heavy contention, stop spinning.
+ */
+ if (lock->owner)
+ return 0;
+
return 1;
}
#endif
@@ -4684,19 +4760,18 @@
*/
void rt_mutex_setprio(struct task_struct *p, int prio)
{
- unsigned long flags;
int oldprio, on_rq, running;
struct rq *rq;
const struct sched_class *prev_class;
BUG_ON(prio < 0 || prio > MAX_PRIO);
- rq = task_rq_lock(p, &flags);
+ rq = __task_rq_lock(p);
trace_sched_pi_setprio(p, prio);
oldprio = p->prio;
prev_class = p->sched_class;
- on_rq = p->se.on_rq;
+ on_rq = p->on_rq;
running = task_current(rq, p);
if (on_rq)
dequeue_task(rq, p, 0);
@@ -4716,7 +4791,7 @@
enqueue_task(rq, p, oldprio < prio ? ENQUEUE_HEAD : 0);
check_class_changed(rq, p, prev_class, oldprio);
- task_rq_unlock(rq, &flags);
+ __task_rq_unlock(rq);
}
#endif
@@ -4744,7 +4819,7 @@
p->static_prio = NICE_TO_PRIO(nice);
goto out_unlock;
}
- on_rq = p->se.on_rq;
+ on_rq = p->on_rq;
if (on_rq)
dequeue_task(rq, p, 0);
@@ -4764,7 +4839,7 @@
resched_task(rq->curr);
}
out_unlock:
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
}
EXPORT_SYMBOL(set_user_nice);
@@ -4878,8 +4953,6 @@
static void
__setscheduler(struct rq *rq, struct task_struct *p, int policy, int prio)
{
- BUG_ON(p->se.on_rq);
-
p->policy = policy;
p->rt_priority = prio;
p->normal_prio = normal_prio(p);
@@ -4994,20 +5067,17 @@
/*
* make sure no PI-waiters arrive (or leave) while we are
* changing the priority of the task:
- */
- raw_spin_lock_irqsave(&p->pi_lock, flags);
- /*
+ *
* To be able to change p->policy safely, the appropriate
* runqueue lock must be held.
*/
- rq = __task_rq_lock(p);
+ rq = task_rq_lock(p, &flags);
/*
* Changing the policy of the stop threads its a very bad idea
*/
if (p == rq->stop) {
- __task_rq_unlock(rq);
- raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ task_rq_unlock(rq, p, &flags);
return -EINVAL;
}
@@ -5031,8 +5101,7 @@
if (rt_bandwidth_enabled() && rt_policy(policy) &&
task_group(p)->rt_bandwidth.rt_runtime == 0 &&
!task_group_is_autogroup(task_group(p))) {
- __task_rq_unlock(rq);
- raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ task_rq_unlock(rq, p, &flags);
return -EPERM;
}
}
@@ -5041,11 +5110,10 @@
/* recheck policy now with rq lock held */
if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
policy = oldpolicy = -1;
- __task_rq_unlock(rq);
- raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ task_rq_unlock(rq, p, &flags);
goto recheck;
}
- on_rq = p->se.on_rq;
+ on_rq = p->on_rq;
running = task_current(rq, p);
if (on_rq)
deactivate_task(rq, p, 0);
@@ -5064,8 +5132,7 @@
activate_task(rq, p, 0);
check_class_changed(rq, p, prev_class, oldprio);
- __task_rq_unlock(rq);
- raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ task_rq_unlock(rq, p, &flags);
rt_mutex_adjust_pi(p);
@@ -5316,7 +5383,6 @@
{
struct task_struct *p;
unsigned long flags;
- struct rq *rq;
int retval;
get_online_cpus();
@@ -5331,9 +5397,9 @@
if (retval)
goto out_unlock;
- rq = task_rq_lock(p, &flags);
+ raw_spin_lock_irqsave(&p->pi_lock, flags);
cpumask_and(mask, &p->cpus_allowed, cpu_online_mask);
- task_rq_unlock(rq, &flags);
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
out_unlock:
rcu_read_unlock();
@@ -5658,7 +5724,7 @@
rq = task_rq_lock(p, &flags);
time_slice = p->sched_class->get_rr_interval(rq, p);
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
rcu_read_unlock();
jiffies_to_timespec(time_slice, &t);
@@ -5776,17 +5842,14 @@
rcu_read_unlock();
rq->curr = rq->idle = idle;
-#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
- idle->oncpu = 1;
+#if defined(CONFIG_SMP)
+ idle->on_cpu = 1;
#endif
raw_spin_unlock_irqrestore(&rq->lock, flags);
/* Set the preempt count _outside_ the spinlocks! */
-#if defined(CONFIG_PREEMPT)
- task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0);
-#else
task_thread_info(idle)->preempt_count = 0;
-#endif
+
/*
* The idle tasks have their own, simple scheduling class:
*/
@@ -5881,26 +5944,17 @@
unsigned int dest_cpu;
int ret = 0;
- /*
- * Serialize against TASK_WAKING so that ttwu() and wunt() can
- * drop the rq->lock and still rely on ->cpus_allowed.
- */
-again:
- while (task_is_waking(p))
- cpu_relax();
rq = task_rq_lock(p, &flags);
- if (task_is_waking(p)) {
- task_rq_unlock(rq, &flags);
- goto again;
- }
+
+ if (cpumask_equal(&p->cpus_allowed, new_mask))
+ goto out;
if (!cpumask_intersects(new_mask, cpu_active_mask)) {
ret = -EINVAL;
goto out;
}
- if (unlikely((p->flags & PF_THREAD_BOUND) && p != current &&
- !cpumask_equal(&p->cpus_allowed, new_mask))) {
+ if (unlikely((p->flags & PF_THREAD_BOUND) && p != current)) {
ret = -EINVAL;
goto out;
}
@@ -5917,16 +5971,16 @@
goto out;
dest_cpu = cpumask_any_and(cpu_active_mask, new_mask);
- if (migrate_task(p, rq)) {
+ if (p->on_rq) {
struct migration_arg arg = { p, dest_cpu };
/* Need help from migration thread: drop lock and wait. */
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
stop_one_cpu(cpu_of(rq), migration_cpu_stop, &arg);
tlb_migrate_finish(p->mm);
return 0;
}
out:
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, p, &flags);
return ret;
}
@@ -5954,6 +6008,7 @@
rq_src = cpu_rq(src_cpu);
rq_dest = cpu_rq(dest_cpu);
+ raw_spin_lock(&p->pi_lock);
double_rq_lock(rq_src, rq_dest);
/* Already moved. */
if (task_cpu(p) != src_cpu)
@@ -5966,7 +6021,7 @@
* If we're not on a rq, the next wake-up will ensure we're
* placed properly.
*/
- if (p->se.on_rq) {
+ if (p->on_rq) {
deactivate_task(rq_src, p, 0);
set_task_cpu(p, dest_cpu);
activate_task(rq_dest, p, 0);
@@ -5976,6 +6031,7 @@
ret = 1;
fail:
double_rq_unlock(rq_src, rq_dest);
+ raw_spin_unlock(&p->pi_lock);
return ret;
}
@@ -6316,6 +6372,7 @@
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DYING:
+ sched_ttwu_pending();
/* Update our root-domain */
raw_spin_lock_irqsave(&rq->lock, flags);
if (rq->rd) {
@@ -6394,6 +6451,8 @@
#ifdef CONFIG_SMP
+static cpumask_var_t sched_domains_tmpmask; /* sched_domains_mutex */
+
#ifdef CONFIG_SCHED_DEBUG
static __read_mostly int sched_domain_debug_enabled;
@@ -6489,7 +6548,6 @@
static void sched_domain_debug(struct sched_domain *sd, int cpu)
{
- cpumask_var_t groupmask;
int level = 0;
if (!sched_domain_debug_enabled)
@@ -6502,20 +6560,14 @@
printk(KERN_DEBUG "CPU%d attaching sched-domain:\n", cpu);
- if (!alloc_cpumask_var(&groupmask, GFP_KERNEL)) {
- printk(KERN_DEBUG "Cannot load-balance (out of memory)\n");
- return;
- }
-
for (;;) {
- if (sched_domain_debug_one(sd, cpu, level, groupmask))
+ if (sched_domain_debug_one(sd, cpu, level, sched_domains_tmpmask))
break;
level++;
sd = sd->parent;
if (!sd)
break;
}
- free_cpumask_var(groupmask);
}
#else /* !CONFIG_SCHED_DEBUG */
# define sched_domain_debug(sd, cpu) do { } while (0)
@@ -6572,12 +6624,11 @@
return 1;
}
-static void free_rootdomain(struct root_domain *rd)
+static void free_rootdomain(struct rcu_head *rcu)
{
- synchronize_sched();
+ struct root_domain *rd = container_of(rcu, struct root_domain, rcu);
cpupri_cleanup(&rd->cpupri);
-
free_cpumask_var(rd->rto_mask);
free_cpumask_var(rd->online);
free_cpumask_var(rd->span);
@@ -6618,7 +6669,7 @@
raw_spin_unlock_irqrestore(&rq->lock, flags);
if (old_rd)
- free_rootdomain(old_rd);
+ call_rcu_sched(&old_rd->rcu, free_rootdomain);
}
static int init_rootdomain(struct root_domain *rd)
@@ -6669,6 +6720,25 @@
return rd;
}
+static void free_sched_domain(struct rcu_head *rcu)
+{
+ struct sched_domain *sd = container_of(rcu, struct sched_domain, rcu);
+ if (atomic_dec_and_test(&sd->groups->ref))
+ kfree(sd->groups);
+ kfree(sd);
+}
+
+static void destroy_sched_domain(struct sched_domain *sd, int cpu)
+{
+ call_rcu(&sd->rcu, free_sched_domain);
+}
+
+static void destroy_sched_domains(struct sched_domain *sd, int cpu)
+{
+ for (; sd; sd = sd->parent)
+ destroy_sched_domain(sd, cpu);
+}
+
/*
* Attach the domain 'sd' to 'cpu' as its base domain. Callers must
* hold the hotplug lock.
@@ -6679,9 +6749,6 @@
struct rq *rq = cpu_rq(cpu);
struct sched_domain *tmp;
- for (tmp = sd; tmp; tmp = tmp->parent)
- tmp->span_weight = cpumask_weight(sched_domain_span(tmp));
-
/* Remove the sched domains which do not contribute to scheduling. */
for (tmp = sd; tmp; ) {
struct sched_domain *parent = tmp->parent;
@@ -6692,12 +6759,15 @@
tmp->parent = parent->parent;
if (parent->parent)
parent->parent->child = tmp;
+ destroy_sched_domain(parent, cpu);
} else
tmp = tmp->parent;
}
if (sd && sd_degenerate(sd)) {
+ tmp = sd;
sd = sd->parent;
+ destroy_sched_domain(tmp, cpu);
if (sd)
sd->child = NULL;
}
@@ -6705,7 +6775,9 @@
sched_domain_debug(sd, cpu);
rq_attach_root(rq, rd);
+ tmp = rq->sd;
rcu_assign_pointer(rq->sd, sd);
+ destroy_sched_domains(tmp, cpu);
}
/* cpus with isolated domains */
@@ -6721,56 +6793,6 @@
__setup("isolcpus=", isolated_cpu_setup);
-/*
- * init_sched_build_groups takes the cpumask we wish to span, and a pointer
- * to a function which identifies what group(along with sched group) a CPU
- * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
- * (due to the fact that we keep track of groups covered with a struct cpumask).
- *
- * init_sched_build_groups will build a circular linked list of the groups
- * covered by the given span, and will set each group's ->cpumask correctly,
- * and ->cpu_power to 0.
- */
-static void
-init_sched_build_groups(const struct cpumask *span,
- const struct cpumask *cpu_map,
- int (*group_fn)(int cpu, const struct cpumask *cpu_map,
- struct sched_group **sg,
- struct cpumask *tmpmask),
- struct cpumask *covered, struct cpumask *tmpmask)
-{
- struct sched_group *first = NULL, *last = NULL;
- int i;
-
- cpumask_clear(covered);
-
- for_each_cpu(i, span) {
- struct sched_group *sg;
- int group = group_fn(i, cpu_map, &sg, tmpmask);
- int j;
-
- if (cpumask_test_cpu(i, covered))
- continue;
-
- cpumask_clear(sched_group_cpus(sg));
- sg->cpu_power = 0;
-
- for_each_cpu(j, span) {
- if (group_fn(j, cpu_map, NULL, tmpmask) != group)
- continue;
-
- cpumask_set_cpu(j, covered);
- cpumask_set_cpu(j, sched_group_cpus(sg));
- }
- if (!first)
- first = sg;
- if (last)
- last->next = sg;
- last = sg;
- }
- last->next = first;
-}
-
#define SD_NODES_PER_DOMAIN 16
#ifdef CONFIG_NUMA
@@ -6787,7 +6809,7 @@
*/
static int find_next_best_node(int node, nodemask_t *used_nodes)
{
- int i, n, val, min_val, best_node = 0;
+ int i, n, val, min_val, best_node = -1;
min_val = INT_MAX;
@@ -6811,7 +6833,8 @@
}
}
- node_set(best_node, *used_nodes);
+ if (best_node != -1)
+ node_set(best_node, *used_nodes);
return best_node;
}
@@ -6837,315 +6860,130 @@
for (i = 1; i < SD_NODES_PER_DOMAIN; i++) {
int next_node = find_next_best_node(node, &used_nodes);
-
+ if (next_node < 0)
+ break;
cpumask_or(span, span, cpumask_of_node(next_node));
}
}
+
+static const struct cpumask *cpu_node_mask(int cpu)
+{
+ lockdep_assert_held(&sched_domains_mutex);
+
+ sched_domain_node_span(cpu_to_node(cpu), sched_domains_tmpmask);
+
+ return sched_domains_tmpmask;
+}
+
+static const struct cpumask *cpu_allnodes_mask(int cpu)
+{
+ return cpu_possible_mask;
+}
#endif /* CONFIG_NUMA */
+static const struct cpumask *cpu_cpu_mask(int cpu)
+{
+ return cpumask_of_node(cpu_to_node(cpu));
+}
+
int sched_smt_power_savings = 0, sched_mc_power_savings = 0;
-/*
- * The cpus mask in sched_group and sched_domain hangs off the end.
- *
- * ( See the the comments in include/linux/sched.h:struct sched_group
- * and struct sched_domain. )
- */
-struct static_sched_group {
- struct sched_group sg;
- DECLARE_BITMAP(cpus, CONFIG_NR_CPUS);
-};
-
-struct static_sched_domain {
- struct sched_domain sd;
- DECLARE_BITMAP(span, CONFIG_NR_CPUS);
+struct sd_data {
+ struct sched_domain **__percpu sd;
+ struct sched_group **__percpu sg;
};
struct s_data {
-#ifdef CONFIG_NUMA
- int sd_allnodes;
- cpumask_var_t domainspan;
- cpumask_var_t covered;
- cpumask_var_t notcovered;
-#endif
- cpumask_var_t nodemask;
- cpumask_var_t this_sibling_map;
- cpumask_var_t this_core_map;
- cpumask_var_t this_book_map;
- cpumask_var_t send_covered;
- cpumask_var_t tmpmask;
- struct sched_group **sched_group_nodes;
+ struct sched_domain ** __percpu sd;
struct root_domain *rd;
};
enum s_alloc {
- sa_sched_groups = 0,
sa_rootdomain,
- sa_tmpmask,
- sa_send_covered,
- sa_this_book_map,
- sa_this_core_map,
- sa_this_sibling_map,
- sa_nodemask,
- sa_sched_group_nodes,
-#ifdef CONFIG_NUMA
- sa_notcovered,
- sa_covered,
- sa_domainspan,
-#endif
+ sa_sd,
+ sa_sd_storage,
sa_none,
};
-/*
- * SMT sched-domains:
- */
-#ifdef CONFIG_SCHED_SMT
-static DEFINE_PER_CPU(struct static_sched_domain, cpu_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_groups);
+struct sched_domain_topology_level;
-static int
-cpu_to_cpu_group(int cpu, const struct cpumask *cpu_map,
- struct sched_group **sg, struct cpumask *unused)
+typedef struct sched_domain *(*sched_domain_init_f)(struct sched_domain_topology_level *tl, int cpu);
+typedef const struct cpumask *(*sched_domain_mask_f)(int cpu);
+
+struct sched_domain_topology_level {
+ sched_domain_init_f init;
+ sched_domain_mask_f mask;
+ struct sd_data data;
+};
+
+/*
+ * Assumes the sched_domain tree is fully constructed
+ */
+static int get_group(int cpu, struct sd_data *sdd, struct sched_group **sg)
{
+ struct sched_domain *sd = *per_cpu_ptr(sdd->sd, cpu);
+ struct sched_domain *child = sd->child;
+
+ if (child)
+ cpu = cpumask_first(sched_domain_span(child));
+
if (sg)
- *sg = &per_cpu(sched_groups, cpu).sg;
+ *sg = *per_cpu_ptr(sdd->sg, cpu);
+
return cpu;
}
-#endif /* CONFIG_SCHED_SMT */
/*
- * multi-core sched-domains:
+ * build_sched_groups takes the cpumask we wish to span, and a pointer
+ * to a function which identifies what group(along with sched group) a CPU
+ * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
+ * (due to the fact that we keep track of groups covered with a struct cpumask).
+ *
+ * build_sched_groups will build a circular linked list of the groups
+ * covered by the given span, and will set each group's ->cpumask correctly,
+ * and ->cpu_power to 0.
*/
-#ifdef CONFIG_SCHED_MC
-static DEFINE_PER_CPU(struct static_sched_domain, core_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_core);
-
-static int
-cpu_to_core_group(int cpu, const struct cpumask *cpu_map,
- struct sched_group **sg, struct cpumask *mask)
+static void
+build_sched_groups(struct sched_domain *sd)
{
- int group;
-#ifdef CONFIG_SCHED_SMT
- cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
- group = cpumask_first(mask);
-#else
- group = cpu;
-#endif
- if (sg)
- *sg = &per_cpu(sched_group_core, group).sg;
- return group;
-}
-#endif /* CONFIG_SCHED_MC */
+ struct sched_group *first = NULL, *last = NULL;
+ struct sd_data *sdd = sd->private;
+ const struct cpumask *span = sched_domain_span(sd);
+ struct cpumask *covered;
+ int i;
-/*
- * book sched-domains:
- */
-#ifdef CONFIG_SCHED_BOOK
-static DEFINE_PER_CPU(struct static_sched_domain, book_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_book);
+ lockdep_assert_held(&sched_domains_mutex);
+ covered = sched_domains_tmpmask;
-static int
-cpu_to_book_group(int cpu, const struct cpumask *cpu_map,
- struct sched_group **sg, struct cpumask *mask)
-{
- int group = cpu;
-#ifdef CONFIG_SCHED_MC
- cpumask_and(mask, cpu_coregroup_mask(cpu), cpu_map);
- group = cpumask_first(mask);
-#elif defined(CONFIG_SCHED_SMT)
- cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
- group = cpumask_first(mask);
-#endif
- if (sg)
- *sg = &per_cpu(sched_group_book, group).sg;
- return group;
-}
-#endif /* CONFIG_SCHED_BOOK */
+ cpumask_clear(covered);
-static DEFINE_PER_CPU(struct static_sched_domain, phys_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_phys);
+ for_each_cpu(i, span) {
+ struct sched_group *sg;
+ int group = get_group(i, sdd, &sg);
+ int j;
-static int
-cpu_to_phys_group(int cpu, const struct cpumask *cpu_map,
- struct sched_group **sg, struct cpumask *mask)
-{
- int group;
-#ifdef CONFIG_SCHED_BOOK
- cpumask_and(mask, cpu_book_mask(cpu), cpu_map);
- group = cpumask_first(mask);
-#elif defined(CONFIG_SCHED_MC)
- cpumask_and(mask, cpu_coregroup_mask(cpu), cpu_map);
- group = cpumask_first(mask);
-#elif defined(CONFIG_SCHED_SMT)
- cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
- group = cpumask_first(mask);
-#else
- group = cpu;
-#endif
- if (sg)
- *sg = &per_cpu(sched_group_phys, group).sg;
- return group;
-}
-
-#ifdef CONFIG_NUMA
-/*
- * The init_sched_build_groups can't handle what we want to do with node
- * groups, so roll our own. Now each node has its own list of groups which
- * gets dynamically allocated.
- */
-static DEFINE_PER_CPU(struct static_sched_domain, node_domains);
-static struct sched_group ***sched_group_nodes_bycpu;
-
-static DEFINE_PER_CPU(struct static_sched_domain, allnodes_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_allnodes);
-
-static int cpu_to_allnodes_group(int cpu, const struct cpumask *cpu_map,
- struct sched_group **sg,
- struct cpumask *nodemask)
-{
- int group;
-
- cpumask_and(nodemask, cpumask_of_node(cpu_to_node(cpu)), cpu_map);
- group = cpumask_first(nodemask);
-
- if (sg)
- *sg = &per_cpu(sched_group_allnodes, group).sg;
- return group;
-}
-
-static void init_numa_sched_groups_power(struct sched_group *group_head)
-{
- struct sched_group *sg = group_head;
- int j;
-
- if (!sg)
- return;
- do {
- for_each_cpu(j, sched_group_cpus(sg)) {
- struct sched_domain *sd;
-
- sd = &per_cpu(phys_domains, j).sd;
- if (j != group_first_cpu(sd->groups)) {
- /*
- * Only add "power" once for each
- * physical package.
- */
- continue;
- }
-
- sg->cpu_power += sd->groups->cpu_power;
- }
- sg = sg->next;
- } while (sg != group_head);
-}
-
-static int build_numa_sched_groups(struct s_data *d,
- const struct cpumask *cpu_map, int num)
-{
- struct sched_domain *sd;
- struct sched_group *sg, *prev;
- int n, j;
-
- cpumask_clear(d->covered);
- cpumask_and(d->nodemask, cpumask_of_node(num), cpu_map);
- if (cpumask_empty(d->nodemask)) {
- d->sched_group_nodes[num] = NULL;
- goto out;
- }
-
- sched_domain_node_span(num, d->domainspan);
- cpumask_and(d->domainspan, d->domainspan, cpu_map);
-
- sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
- GFP_KERNEL, num);
- if (!sg) {
- printk(KERN_WARNING "Can not alloc domain group for node %d\n",
- num);
- return -ENOMEM;
- }
- d->sched_group_nodes[num] = sg;
-
- for_each_cpu(j, d->nodemask) {
- sd = &per_cpu(node_domains, j).sd;
- sd->groups = sg;
- }
-
- sg->cpu_power = 0;
- cpumask_copy(sched_group_cpus(sg), d->nodemask);
- sg->next = sg;
- cpumask_or(d->covered, d->covered, d->nodemask);
-
- prev = sg;
- for (j = 0; j < nr_node_ids; j++) {
- n = (num + j) % nr_node_ids;
- cpumask_complement(d->notcovered, d->covered);
- cpumask_and(d->tmpmask, d->notcovered, cpu_map);
- cpumask_and(d->tmpmask, d->tmpmask, d->domainspan);
- if (cpumask_empty(d->tmpmask))
- break;
- cpumask_and(d->tmpmask, d->tmpmask, cpumask_of_node(n));
- if (cpumask_empty(d->tmpmask))
+ if (cpumask_test_cpu(i, covered))
continue;
- sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
- GFP_KERNEL, num);
- if (!sg) {
- printk(KERN_WARNING
- "Can not alloc domain group for node %d\n", j);
- return -ENOMEM;
- }
+
+ cpumask_clear(sched_group_cpus(sg));
sg->cpu_power = 0;
- cpumask_copy(sched_group_cpus(sg), d->tmpmask);
- sg->next = prev->next;
- cpumask_or(d->covered, d->covered, d->tmpmask);
- prev->next = sg;
- prev = sg;
- }
-out:
- return 0;
-}
-#endif /* CONFIG_NUMA */
-#ifdef CONFIG_NUMA
-/* Free memory allocated for various sched_group structures */
-static void free_sched_groups(const struct cpumask *cpu_map,
- struct cpumask *nodemask)
-{
- int cpu, i;
-
- for_each_cpu(cpu, cpu_map) {
- struct sched_group **sched_group_nodes
- = sched_group_nodes_bycpu[cpu];
-
- if (!sched_group_nodes)
- continue;
-
- for (i = 0; i < nr_node_ids; i++) {
- struct sched_group *oldsg, *sg = sched_group_nodes[i];
-
- cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
- if (cpumask_empty(nodemask))
+ for_each_cpu(j, span) {
+ if (get_group(j, sdd, NULL) != group)
continue;
- if (sg == NULL)
- continue;
- sg = sg->next;
-next_sg:
- oldsg = sg;
- sg = sg->next;
- kfree(oldsg);
- if (oldsg != sched_group_nodes[i])
- goto next_sg;
+ cpumask_set_cpu(j, covered);
+ cpumask_set_cpu(j, sched_group_cpus(sg));
}
- kfree(sched_group_nodes);
- sched_group_nodes_bycpu[cpu] = NULL;
+
+ if (!first)
+ first = sg;
+ if (last)
+ last->next = sg;
+ last = sg;
}
+ last->next = first;
}
-#else /* !CONFIG_NUMA */
-static void free_sched_groups(const struct cpumask *cpu_map,
- struct cpumask *nodemask)
-{
-}
-#endif /* CONFIG_NUMA */
/*
* Initialize sched groups cpu_power.
@@ -7159,11 +6997,6 @@
*/
static void init_sched_groups_power(int cpu, struct sched_domain *sd)
{
- struct sched_domain *child;
- struct sched_group *group;
- long power;
- int weight;
-
WARN_ON(!sd || !sd->groups);
if (cpu != group_first_cpu(sd->groups))
@@ -7171,36 +7004,7 @@
sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups));
- child = sd->child;
-
- sd->groups->cpu_power = 0;
-
- if (!child) {
- power = SCHED_LOAD_SCALE;
- weight = cpumask_weight(sched_domain_span(sd));
- /*
- * SMT siblings share the power of a single core.
- * Usually multiple threads get a better yield out of
- * that one core than a single thread would have,
- * reflect that in sd->smt_gain.
- */
- if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
- power *= sd->smt_gain;
- power /= weight;
- power >>= SCHED_LOAD_SHIFT;
- }
- sd->groups->cpu_power += power;
- return;
- }
-
- /*
- * Add cpu_power of each child group to this groups cpu_power.
- */
- group = child->groups;
- do {
- sd->groups->cpu_power += group->cpu_power;
- group = group->next;
- } while (group != child->groups);
+ update_group_power(sd, cpu);
}
/*
@@ -7214,15 +7018,15 @@
# define SD_INIT_NAME(sd, type) do { } while (0)
#endif
-#define SD_INIT(sd, type) sd_init_##type(sd)
-
-#define SD_INIT_FUNC(type) \
-static noinline void sd_init_##type(struct sched_domain *sd) \
-{ \
- memset(sd, 0, sizeof(*sd)); \
- *sd = SD_##type##_INIT; \
- sd->level = SD_LV_##type; \
- SD_INIT_NAME(sd, type); \
+#define SD_INIT_FUNC(type) \
+static noinline struct sched_domain * \
+sd_init_##type(struct sched_domain_topology_level *tl, int cpu) \
+{ \
+ struct sched_domain *sd = *per_cpu_ptr(tl->data.sd, cpu); \
+ *sd = SD_##type##_INIT; \
+ SD_INIT_NAME(sd, type); \
+ sd->private = &tl->data; \
+ return sd; \
}
SD_INIT_FUNC(CPU)
@@ -7241,13 +7045,14 @@
#endif
static int default_relax_domain_level = -1;
+int sched_domain_level_max;
static int __init setup_relax_domain_level(char *str)
{
unsigned long val;
val = simple_strtoul(str, NULL, 0);
- if (val < SD_LV_MAX)
+ if (val < sched_domain_level_max)
default_relax_domain_level = val;
return 1;
@@ -7275,37 +7080,20 @@
}
}
+static void __sdt_free(const struct cpumask *cpu_map);
+static int __sdt_alloc(const struct cpumask *cpu_map);
+
static void __free_domain_allocs(struct s_data *d, enum s_alloc what,
const struct cpumask *cpu_map)
{
switch (what) {
- case sa_sched_groups:
- free_sched_groups(cpu_map, d->tmpmask); /* fall through */
- d->sched_group_nodes = NULL;
case sa_rootdomain:
- free_rootdomain(d->rd); /* fall through */
- case sa_tmpmask:
- free_cpumask_var(d->tmpmask); /* fall through */
- case sa_send_covered:
- free_cpumask_var(d->send_covered); /* fall through */
- case sa_this_book_map:
- free_cpumask_var(d->this_book_map); /* fall through */
- case sa_this_core_map:
- free_cpumask_var(d->this_core_map); /* fall through */
- case sa_this_sibling_map:
- free_cpumask_var(d->this_sibling_map); /* fall through */
- case sa_nodemask:
- free_cpumask_var(d->nodemask); /* fall through */
- case sa_sched_group_nodes:
-#ifdef CONFIG_NUMA
- kfree(d->sched_group_nodes); /* fall through */
- case sa_notcovered:
- free_cpumask_var(d->notcovered); /* fall through */
- case sa_covered:
- free_cpumask_var(d->covered); /* fall through */
- case sa_domainspan:
- free_cpumask_var(d->domainspan); /* fall through */
-#endif
+ if (!atomic_read(&d->rd->refcount))
+ free_rootdomain(&d->rd->rcu); /* fall through */
+ case sa_sd:
+ free_percpu(d->sd); /* fall through */
+ case sa_sd_storage:
+ __sdt_free(cpu_map); /* fall through */
case sa_none:
break;
}
@@ -7314,308 +7102,212 @@
static enum s_alloc __visit_domain_allocation_hell(struct s_data *d,
const struct cpumask *cpu_map)
{
-#ifdef CONFIG_NUMA
- if (!alloc_cpumask_var(&d->domainspan, GFP_KERNEL))
- return sa_none;
- if (!alloc_cpumask_var(&d->covered, GFP_KERNEL))
- return sa_domainspan;
- if (!alloc_cpumask_var(&d->notcovered, GFP_KERNEL))
- return sa_covered;
- /* Allocate the per-node list of sched groups */
- d->sched_group_nodes = kcalloc(nr_node_ids,
- sizeof(struct sched_group *), GFP_KERNEL);
- if (!d->sched_group_nodes) {
- printk(KERN_WARNING "Can not alloc sched group node list\n");
- return sa_notcovered;
- }
- sched_group_nodes_bycpu[cpumask_first(cpu_map)] = d->sched_group_nodes;
-#endif
- if (!alloc_cpumask_var(&d->nodemask, GFP_KERNEL))
- return sa_sched_group_nodes;
- if (!alloc_cpumask_var(&d->this_sibling_map, GFP_KERNEL))
- return sa_nodemask;
- if (!alloc_cpumask_var(&d->this_core_map, GFP_KERNEL))
- return sa_this_sibling_map;
- if (!alloc_cpumask_var(&d->this_book_map, GFP_KERNEL))
- return sa_this_core_map;
- if (!alloc_cpumask_var(&d->send_covered, GFP_KERNEL))
- return sa_this_book_map;
- if (!alloc_cpumask_var(&d->tmpmask, GFP_KERNEL))
- return sa_send_covered;
+ memset(d, 0, sizeof(*d));
+
+ if (__sdt_alloc(cpu_map))
+ return sa_sd_storage;
+ d->sd = alloc_percpu(struct sched_domain *);
+ if (!d->sd)
+ return sa_sd_storage;
d->rd = alloc_rootdomain();
- if (!d->rd) {
- printk(KERN_WARNING "Cannot alloc root domain\n");
- return sa_tmpmask;
- }
+ if (!d->rd)
+ return sa_sd;
return sa_rootdomain;
}
-static struct sched_domain *__build_numa_sched_domains(struct s_data *d,
- const struct cpumask *cpu_map, struct sched_domain_attr *attr, int i)
+/*
+ * NULL the sd_data elements we've used to build the sched_domain and
+ * sched_group structure so that the subsequent __free_domain_allocs()
+ * will not free the data we're using.
+ */
+static void claim_allocations(int cpu, struct sched_domain *sd)
{
- struct sched_domain *sd = NULL;
-#ifdef CONFIG_NUMA
- struct sched_domain *parent;
+ struct sd_data *sdd = sd->private;
+ struct sched_group *sg = sd->groups;
- d->sd_allnodes = 0;
- if (cpumask_weight(cpu_map) >
- SD_NODES_PER_DOMAIN * cpumask_weight(d->nodemask)) {
- sd = &per_cpu(allnodes_domains, i).sd;
- SD_INIT(sd, ALLNODES);
- set_domain_attribute(sd, attr);
- cpumask_copy(sched_domain_span(sd), cpu_map);
- cpu_to_allnodes_group(i, cpu_map, &sd->groups, d->tmpmask);
- d->sd_allnodes = 1;
+ WARN_ON_ONCE(*per_cpu_ptr(sdd->sd, cpu) != sd);
+ *per_cpu_ptr(sdd->sd, cpu) = NULL;
+
+ if (cpu == cpumask_first(sched_group_cpus(sg))) {
+ WARN_ON_ONCE(*per_cpu_ptr(sdd->sg, cpu) != sg);
+ *per_cpu_ptr(sdd->sg, cpu) = NULL;
}
- parent = sd;
-
- sd = &per_cpu(node_domains, i).sd;
- SD_INIT(sd, NODE);
- set_domain_attribute(sd, attr);
- sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
- sd->parent = parent;
- if (parent)
- parent->child = sd;
- cpumask_and(sched_domain_span(sd), sched_domain_span(sd), cpu_map);
-#endif
- return sd;
}
-static struct sched_domain *__build_cpu_sched_domain(struct s_data *d,
- const struct cpumask *cpu_map, struct sched_domain_attr *attr,
- struct sched_domain *parent, int i)
-{
- struct sched_domain *sd;
- sd = &per_cpu(phys_domains, i).sd;
- SD_INIT(sd, CPU);
- set_domain_attribute(sd, attr);
- cpumask_copy(sched_domain_span(sd), d->nodemask);
- sd->parent = parent;
- if (parent)
- parent->child = sd;
- cpu_to_phys_group(i, cpu_map, &sd->groups, d->tmpmask);
- return sd;
-}
-
-static struct sched_domain *__build_book_sched_domain(struct s_data *d,
- const struct cpumask *cpu_map, struct sched_domain_attr *attr,
- struct sched_domain *parent, int i)
-{
- struct sched_domain *sd = parent;
-#ifdef CONFIG_SCHED_BOOK
- sd = &per_cpu(book_domains, i).sd;
- SD_INIT(sd, BOOK);
- set_domain_attribute(sd, attr);
- cpumask_and(sched_domain_span(sd), cpu_map, cpu_book_mask(i));
- sd->parent = parent;
- parent->child = sd;
- cpu_to_book_group(i, cpu_map, &sd->groups, d->tmpmask);
-#endif
- return sd;
-}
-
-static struct sched_domain *__build_mc_sched_domain(struct s_data *d,
- const struct cpumask *cpu_map, struct sched_domain_attr *attr,
- struct sched_domain *parent, int i)
-{
- struct sched_domain *sd = parent;
-#ifdef CONFIG_SCHED_MC
- sd = &per_cpu(core_domains, i).sd;
- SD_INIT(sd, MC);
- set_domain_attribute(sd, attr);
- cpumask_and(sched_domain_span(sd), cpu_map, cpu_coregroup_mask(i));
- sd->parent = parent;
- parent->child = sd;
- cpu_to_core_group(i, cpu_map, &sd->groups, d->tmpmask);
-#endif
- return sd;
-}
-
-static struct sched_domain *__build_smt_sched_domain(struct s_data *d,
- const struct cpumask *cpu_map, struct sched_domain_attr *attr,
- struct sched_domain *parent, int i)
-{
- struct sched_domain *sd = parent;
#ifdef CONFIG_SCHED_SMT
- sd = &per_cpu(cpu_domains, i).sd;
- SD_INIT(sd, SIBLING);
- set_domain_attribute(sd, attr);
- cpumask_and(sched_domain_span(sd), cpu_map, topology_thread_cpumask(i));
- sd->parent = parent;
- parent->child = sd;
- cpu_to_cpu_group(i, cpu_map, &sd->groups, d->tmpmask);
-#endif
- return sd;
-}
-
-static void build_sched_groups(struct s_data *d, enum sched_domain_level l,
- const struct cpumask *cpu_map, int cpu)
+static const struct cpumask *cpu_smt_mask(int cpu)
{
- switch (l) {
+ return topology_thread_cpumask(cpu);
+}
+#endif
+
+/*
+ * Topology list, bottom-up.
+ */
+static struct sched_domain_topology_level default_topology[] = {
#ifdef CONFIG_SCHED_SMT
- case SD_LV_SIBLING: /* set up CPU (sibling) groups */
- cpumask_and(d->this_sibling_map, cpu_map,
- topology_thread_cpumask(cpu));
- if (cpu == cpumask_first(d->this_sibling_map))
- init_sched_build_groups(d->this_sibling_map, cpu_map,
- &cpu_to_cpu_group,
- d->send_covered, d->tmpmask);
- break;
+ { sd_init_SIBLING, cpu_smt_mask, },
#endif
#ifdef CONFIG_SCHED_MC
- case SD_LV_MC: /* set up multi-core groups */
- cpumask_and(d->this_core_map, cpu_map, cpu_coregroup_mask(cpu));
- if (cpu == cpumask_first(d->this_core_map))
- init_sched_build_groups(d->this_core_map, cpu_map,
- &cpu_to_core_group,
- d->send_covered, d->tmpmask);
- break;
+ { sd_init_MC, cpu_coregroup_mask, },
#endif
#ifdef CONFIG_SCHED_BOOK
- case SD_LV_BOOK: /* set up book groups */
- cpumask_and(d->this_book_map, cpu_map, cpu_book_mask(cpu));
- if (cpu == cpumask_first(d->this_book_map))
- init_sched_build_groups(d->this_book_map, cpu_map,
- &cpu_to_book_group,
- d->send_covered, d->tmpmask);
- break;
+ { sd_init_BOOK, cpu_book_mask, },
#endif
- case SD_LV_CPU: /* set up physical groups */
- cpumask_and(d->nodemask, cpumask_of_node(cpu), cpu_map);
- if (!cpumask_empty(d->nodemask))
- init_sched_build_groups(d->nodemask, cpu_map,
- &cpu_to_phys_group,
- d->send_covered, d->tmpmask);
- break;
+ { sd_init_CPU, cpu_cpu_mask, },
#ifdef CONFIG_NUMA
- case SD_LV_ALLNODES:
- init_sched_build_groups(cpu_map, cpu_map, &cpu_to_allnodes_group,
- d->send_covered, d->tmpmask);
- break;
+ { sd_init_NODE, cpu_node_mask, },
+ { sd_init_ALLNODES, cpu_allnodes_mask, },
#endif
- default:
- break;
+ { NULL, },
+};
+
+static struct sched_domain_topology_level *sched_domain_topology = default_topology;
+
+static int __sdt_alloc(const struct cpumask *cpu_map)
+{
+ struct sched_domain_topology_level *tl;
+ int j;
+
+ for (tl = sched_domain_topology; tl->init; tl++) {
+ struct sd_data *sdd = &tl->data;
+
+ sdd->sd = alloc_percpu(struct sched_domain *);
+ if (!sdd->sd)
+ return -ENOMEM;
+
+ sdd->sg = alloc_percpu(struct sched_group *);
+ if (!sdd->sg)
+ return -ENOMEM;
+
+ for_each_cpu(j, cpu_map) {
+ struct sched_domain *sd;
+ struct sched_group *sg;
+
+ sd = kzalloc_node(sizeof(struct sched_domain) + cpumask_size(),
+ GFP_KERNEL, cpu_to_node(j));
+ if (!sd)
+ return -ENOMEM;
+
+ *per_cpu_ptr(sdd->sd, j) = sd;
+
+ sg = kzalloc_node(sizeof(struct sched_group) + cpumask_size(),
+ GFP_KERNEL, cpu_to_node(j));
+ if (!sg)
+ return -ENOMEM;
+
+ *per_cpu_ptr(sdd->sg, j) = sg;
+ }
}
+
+ return 0;
+}
+
+static void __sdt_free(const struct cpumask *cpu_map)
+{
+ struct sched_domain_topology_level *tl;
+ int j;
+
+ for (tl = sched_domain_topology; tl->init; tl++) {
+ struct sd_data *sdd = &tl->data;
+
+ for_each_cpu(j, cpu_map) {
+ kfree(*per_cpu_ptr(sdd->sd, j));
+ kfree(*per_cpu_ptr(sdd->sg, j));
+ }
+ free_percpu(sdd->sd);
+ free_percpu(sdd->sg);
+ }
+}
+
+struct sched_domain *build_sched_domain(struct sched_domain_topology_level *tl,
+ struct s_data *d, const struct cpumask *cpu_map,
+ struct sched_domain_attr *attr, struct sched_domain *child,
+ int cpu)
+{
+ struct sched_domain *sd = tl->init(tl, cpu);
+ if (!sd)
+ return child;
+
+ set_domain_attribute(sd, attr);
+ cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
+ if (child) {
+ sd->level = child->level + 1;
+ sched_domain_level_max = max(sched_domain_level_max, sd->level);
+ child->parent = sd;
+ }
+ sd->child = child;
+
+ return sd;
}
/*
* Build sched domains for a given set of cpus and attach the sched domains
* to the individual cpus
*/
-static int __build_sched_domains(const struct cpumask *cpu_map,
- struct sched_domain_attr *attr)
+static int build_sched_domains(const struct cpumask *cpu_map,
+ struct sched_domain_attr *attr)
{
enum s_alloc alloc_state = sa_none;
- struct s_data d;
struct sched_domain *sd;
- int i;
-#ifdef CONFIG_NUMA
- d.sd_allnodes = 0;
-#endif
+ struct s_data d;
+ int i, ret = -ENOMEM;
alloc_state = __visit_domain_allocation_hell(&d, cpu_map);
if (alloc_state != sa_rootdomain)
goto error;
- alloc_state = sa_sched_groups;
- /*
- * Set up domains for cpus specified by the cpu_map.
- */
+ /* Set up domains for cpus specified by the cpu_map. */
for_each_cpu(i, cpu_map) {
- cpumask_and(d.nodemask, cpumask_of_node(cpu_to_node(i)),
- cpu_map);
+ struct sched_domain_topology_level *tl;
- sd = __build_numa_sched_domains(&d, cpu_map, attr, i);
- sd = __build_cpu_sched_domain(&d, cpu_map, attr, sd, i);
- sd = __build_book_sched_domain(&d, cpu_map, attr, sd, i);
- sd = __build_mc_sched_domain(&d, cpu_map, attr, sd, i);
- sd = __build_smt_sched_domain(&d, cpu_map, attr, sd, i);
+ sd = NULL;
+ for (tl = sched_domain_topology; tl->init; tl++)
+ sd = build_sched_domain(tl, &d, cpu_map, attr, sd, i);
+
+ while (sd->child)
+ sd = sd->child;
+
+ *per_cpu_ptr(d.sd, i) = sd;
}
+ /* Build the groups for the domains */
for_each_cpu(i, cpu_map) {
- build_sched_groups(&d, SD_LV_SIBLING, cpu_map, i);
- build_sched_groups(&d, SD_LV_BOOK, cpu_map, i);
- build_sched_groups(&d, SD_LV_MC, cpu_map, i);
+ for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) {
+ sd->span_weight = cpumask_weight(sched_domain_span(sd));
+ get_group(i, sd->private, &sd->groups);
+ atomic_inc(&sd->groups->ref);
+
+ if (i != cpumask_first(sched_domain_span(sd)))
+ continue;
+
+ build_sched_groups(sd);
+ }
}
- /* Set up physical groups */
- for (i = 0; i < nr_node_ids; i++)
- build_sched_groups(&d, SD_LV_CPU, cpu_map, i);
-
-#ifdef CONFIG_NUMA
- /* Set up node groups */
- if (d.sd_allnodes)
- build_sched_groups(&d, SD_LV_ALLNODES, cpu_map, 0);
-
- for (i = 0; i < nr_node_ids; i++)
- if (build_numa_sched_groups(&d, cpu_map, i))
- goto error;
-#endif
-
/* Calculate CPU power for physical packages and nodes */
-#ifdef CONFIG_SCHED_SMT
- for_each_cpu(i, cpu_map) {
- sd = &per_cpu(cpu_domains, i).sd;
- init_sched_groups_power(i, sd);
- }
-#endif
-#ifdef CONFIG_SCHED_MC
- for_each_cpu(i, cpu_map) {
- sd = &per_cpu(core_domains, i).sd;
- init_sched_groups_power(i, sd);
- }
-#endif
-#ifdef CONFIG_SCHED_BOOK
- for_each_cpu(i, cpu_map) {
- sd = &per_cpu(book_domains, i).sd;
- init_sched_groups_power(i, sd);
- }
-#endif
+ for (i = nr_cpumask_bits-1; i >= 0; i--) {
+ if (!cpumask_test_cpu(i, cpu_map))
+ continue;
- for_each_cpu(i, cpu_map) {
- sd = &per_cpu(phys_domains, i).sd;
- init_sched_groups_power(i, sd);
+ for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) {
+ claim_allocations(i, sd);
+ init_sched_groups_power(i, sd);
+ }
}
-#ifdef CONFIG_NUMA
- for (i = 0; i < nr_node_ids; i++)
- init_numa_sched_groups_power(d.sched_group_nodes[i]);
-
- if (d.sd_allnodes) {
- struct sched_group *sg;
-
- cpu_to_allnodes_group(cpumask_first(cpu_map), cpu_map, &sg,
- d.tmpmask);
- init_numa_sched_groups_power(sg);
- }
-#endif
-
/* Attach the domains */
+ rcu_read_lock();
for_each_cpu(i, cpu_map) {
-#ifdef CONFIG_SCHED_SMT
- sd = &per_cpu(cpu_domains, i).sd;
-#elif defined(CONFIG_SCHED_MC)
- sd = &per_cpu(core_domains, i).sd;
-#elif defined(CONFIG_SCHED_BOOK)
- sd = &per_cpu(book_domains, i).sd;
-#else
- sd = &per_cpu(phys_domains, i).sd;
-#endif
+ sd = *per_cpu_ptr(d.sd, i);
cpu_attach_domain(sd, d.rd, i);
}
+ rcu_read_unlock();
- d.sched_group_nodes = NULL; /* don't free this we still need it */
- __free_domain_allocs(&d, sa_tmpmask, cpu_map);
- return 0;
-
+ ret = 0;
error:
__free_domain_allocs(&d, alloc_state, cpu_map);
- return -ENOMEM;
-}
-
-static int build_sched_domains(const struct cpumask *cpu_map)
-{
- return __build_sched_domains(cpu_map, NULL);
+ return ret;
}
static cpumask_var_t *doms_cur; /* current sched domains */
@@ -7670,7 +7362,7 @@
* For now this just excludes isolated cpus, but could be used to
* exclude other special cases in the future.
*/
-static int arch_init_sched_domains(const struct cpumask *cpu_map)
+static int init_sched_domains(const struct cpumask *cpu_map)
{
int err;
@@ -7681,32 +7373,24 @@
doms_cur = &fallback_doms;
cpumask_andnot(doms_cur[0], cpu_map, cpu_isolated_map);
dattr_cur = NULL;
- err = build_sched_domains(doms_cur[0]);
+ err = build_sched_domains(doms_cur[0], NULL);
register_sched_domain_sysctl();
return err;
}
-static void arch_destroy_sched_domains(const struct cpumask *cpu_map,
- struct cpumask *tmpmask)
-{
- free_sched_groups(cpu_map, tmpmask);
-}
-
/*
* Detach sched domains from a group of cpus specified in cpu_map
* These cpus will now be attached to the NULL domain
*/
static void detach_destroy_domains(const struct cpumask *cpu_map)
{
- /* Save because hotplug lock held. */
- static DECLARE_BITMAP(tmpmask, CONFIG_NR_CPUS);
int i;
+ rcu_read_lock();
for_each_cpu(i, cpu_map)
cpu_attach_domain(NULL, &def_root_domain, i);
- synchronize_sched();
- arch_destroy_sched_domains(cpu_map, to_cpumask(tmpmask));
+ rcu_read_unlock();
}
/* handle null as "default" */
@@ -7795,8 +7479,7 @@
goto match2;
}
/* no match - add a new doms_new */
- __build_sched_domains(doms_new[i],
- dattr_new ? dattr_new + i : NULL);
+ build_sched_domains(doms_new[i], dattr_new ? dattr_new + i : NULL);
match2:
;
}
@@ -7815,7 +7498,7 @@
}
#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-static void arch_reinit_sched_domains(void)
+static void reinit_sched_domains(void)
{
get_online_cpus();
@@ -7848,7 +7531,7 @@
else
sched_mc_power_savings = level;
- arch_reinit_sched_domains();
+ reinit_sched_domains();
return count;
}
@@ -7967,14 +7650,9 @@
alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL);
alloc_cpumask_var(&fallback_doms, GFP_KERNEL);
-#if defined(CONFIG_NUMA)
- sched_group_nodes_bycpu = kzalloc(nr_cpu_ids * sizeof(void **),
- GFP_KERNEL);
- BUG_ON(sched_group_nodes_bycpu == NULL);
-#endif
get_online_cpus();
mutex_lock(&sched_domains_mutex);
- arch_init_sched_domains(cpu_active_mask);
+ init_sched_domains(cpu_active_mask);
cpumask_andnot(non_isolated_cpus, cpu_possible_mask, cpu_isolated_map);
if (cpumask_empty(non_isolated_cpus))
cpumask_set_cpu(smp_processor_id(), non_isolated_cpus);
@@ -8281,6 +7959,7 @@
/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
#ifdef CONFIG_SMP
+ zalloc_cpumask_var(&sched_domains_tmpmask, GFP_NOWAIT);
#ifdef CONFIG_NO_HZ
zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT);
alloc_cpumask_var(&nohz.grp_idle_mask, GFP_NOWAIT);
@@ -8340,7 +8019,7 @@
int old_prio = p->prio;
int on_rq;
- on_rq = p->se.on_rq;
+ on_rq = p->on_rq;
if (on_rq)
deactivate_task(rq, p, 0);
__setscheduler(rq, p, SCHED_NORMAL, 0);
@@ -8553,7 +8232,6 @@
{
struct rt_rq *rt_rq;
struct sched_rt_entity *rt_se;
- struct rq *rq;
int i;
tg->rt_rq = kzalloc(sizeof(rt_rq) * nr_cpu_ids, GFP_KERNEL);
@@ -8567,8 +8245,6 @@
ktime_to_ns(def_rt_bandwidth.rt_period), 0);
for_each_possible_cpu(i) {
- rq = cpu_rq(i);
-
rt_rq = kzalloc_node(sizeof(struct rt_rq),
GFP_KERNEL, cpu_to_node(i));
if (!rt_rq)
@@ -8683,7 +8359,7 @@
rq = task_rq_lock(tsk, &flags);
running = task_current(rq, tsk);
- on_rq = tsk->se.on_rq;
+ on_rq = tsk->on_rq;
if (on_rq)
dequeue_task(rq, tsk, 0);
@@ -8702,7 +8378,7 @@
if (on_rq)
enqueue_task(rq, tsk, 0);
- task_rq_unlock(rq, &flags);
+ task_rq_unlock(rq, tsk, &flags);
}
#endif /* CONFIG_CGROUP_SCHED */
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 7bacd83..a6710a1 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -152,7 +152,7 @@
read_lock_irqsave(&tasklist_lock, flags);
do_each_thread(g, p) {
- if (!p->se.on_rq || task_cpu(p) != rq_cpu)
+ if (!p->on_rq || task_cpu(p) != rq_cpu)
continue;
print_task(m, rq, p);
@@ -296,9 +296,6 @@
P(ttwu_count);
P(ttwu_local);
- SEQ_printf(m, " .%-30s: %d\n", "bkl_count",
- rq->rq_sched_info.bkl_count);
-
#undef P
#undef P64
#endif
@@ -441,7 +438,6 @@
P(se.statistics.wait_count);
PN(se.statistics.iowait_sum);
P(se.statistics.iowait_count);
- P(sched_info.bkl_count);
P(se.nr_migrations);
P(se.statistics.nr_migrations_cold);
P(se.statistics.nr_failed_migrations_affine);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 6fa833a..37f2262 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -358,6 +358,10 @@
}
cfs_rq->min_vruntime = max_vruntime(cfs_rq->min_vruntime, vruntime);
+#ifndef CONFIG_64BIT
+ smp_wmb();
+ cfs_rq->min_vruntime_copy = cfs_rq->min_vruntime;
+#endif
}
/*
@@ -1340,6 +1344,8 @@
hrtick_update(rq);
}
+static void set_next_buddy(struct sched_entity *se);
+
/*
* The dequeue_task method is called before nr_running is
* decreased. We remove the task from the rbtree and
@@ -1349,14 +1355,22 @@
{
struct cfs_rq *cfs_rq;
struct sched_entity *se = &p->se;
+ int task_sleep = flags & DEQUEUE_SLEEP;
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
dequeue_entity(cfs_rq, se, flags);
/* Don't dequeue parent if it has other entities besides us */
- if (cfs_rq->load.weight)
+ if (cfs_rq->load.weight) {
+ /*
+ * Bias pick_next to pick a task from this cfs_rq, as
+ * p is sleeping when it is within its sched_slice.
+ */
+ if (task_sleep && parent_entity(se))
+ set_next_buddy(parent_entity(se));
break;
+ }
flags |= DEQUEUE_SLEEP;
}
@@ -1372,12 +1386,25 @@
#ifdef CONFIG_SMP
-static void task_waking_fair(struct rq *rq, struct task_struct *p)
+static void task_waking_fair(struct task_struct *p)
{
struct sched_entity *se = &p->se;
struct cfs_rq *cfs_rq = cfs_rq_of(se);
+ u64 min_vruntime;
- se->vruntime -= cfs_rq->min_vruntime;
+#ifndef CONFIG_64BIT
+ u64 min_vruntime_copy;
+
+ do {
+ min_vruntime_copy = cfs_rq->min_vruntime_copy;
+ smp_rmb();
+ min_vruntime = cfs_rq->min_vruntime;
+ } while (min_vruntime != min_vruntime_copy);
+#else
+ min_vruntime = cfs_rq->min_vruntime;
+#endif
+
+ se->vruntime -= min_vruntime;
}
#ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1622,6 +1649,7 @@
/*
* Otherwise, iterate the domains and find an elegible idle cpu.
*/
+ rcu_read_lock();
for_each_domain(target, sd) {
if (!(sd->flags & SD_SHARE_PKG_RESOURCES))
break;
@@ -1641,6 +1669,7 @@
cpumask_test_cpu(prev_cpu, sched_domain_span(sd)))
break;
}
+ rcu_read_unlock();
return target;
}
@@ -1657,7 +1686,7 @@
* preempt must be disabled.
*/
static int
-select_task_rq_fair(struct rq *rq, struct task_struct *p, int sd_flag, int wake_flags)
+select_task_rq_fair(struct task_struct *p, int sd_flag, int wake_flags)
{
struct sched_domain *tmp, *affine_sd = NULL, *sd = NULL;
int cpu = smp_processor_id();
@@ -1673,6 +1702,7 @@
new_cpu = prev_cpu;
}
+ rcu_read_lock();
for_each_domain(cpu, tmp) {
if (!(tmp->flags & SD_LOAD_BALANCE))
continue;
@@ -1723,9 +1753,10 @@
if (affine_sd) {
if (cpu == prev_cpu || wake_affine(affine_sd, p, sync))
- return select_idle_sibling(p, cpu);
- else
- return select_idle_sibling(p, prev_cpu);
+ prev_cpu = cpu;
+
+ new_cpu = select_idle_sibling(p, prev_cpu);
+ goto unlock;
}
while (sd) {
@@ -1766,6 +1797,8 @@
}
/* while loop will break here if sd == NULL */
}
+unlock:
+ rcu_read_unlock();
return new_cpu;
}
@@ -1789,10 +1822,7 @@
* This is especially important for buddies when the leftmost
* task is higher priority than the buddy.
*/
- if (unlikely(se->load.weight != NICE_0_LOAD))
- gran = calc_delta_fair(gran, se);
-
- return gran;
+ return calc_delta_fair(gran, se);
}
/*
@@ -1826,26 +1856,26 @@
static void set_last_buddy(struct sched_entity *se)
{
- if (likely(task_of(se)->policy != SCHED_IDLE)) {
- for_each_sched_entity(se)
- cfs_rq_of(se)->last = se;
- }
+ if (entity_is_task(se) && unlikely(task_of(se)->policy == SCHED_IDLE))
+ return;
+
+ for_each_sched_entity(se)
+ cfs_rq_of(se)->last = se;
}
static void set_next_buddy(struct sched_entity *se)
{
- if (likely(task_of(se)->policy != SCHED_IDLE)) {
- for_each_sched_entity(se)
- cfs_rq_of(se)->next = se;
- }
+ if (entity_is_task(se) && unlikely(task_of(se)->policy == SCHED_IDLE))
+ return;
+
+ for_each_sched_entity(se)
+ cfs_rq_of(se)->next = se;
}
static void set_skip_buddy(struct sched_entity *se)
{
- if (likely(task_of(se)->policy != SCHED_IDLE)) {
- for_each_sched_entity(se)
- cfs_rq_of(se)->skip = se;
- }
+ for_each_sched_entity(se)
+ cfs_rq_of(se)->skip = se;
}
/*
@@ -1857,12 +1887,15 @@
struct sched_entity *se = &curr->se, *pse = &p->se;
struct cfs_rq *cfs_rq = task_cfs_rq(curr);
int scale = cfs_rq->nr_running >= sched_nr_latency;
+ int next_buddy_marked = 0;
if (unlikely(se == pse))
return;
- if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK))
+ if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK)) {
set_next_buddy(pse);
+ next_buddy_marked = 1;
+ }
/*
* We can come here with TIF_NEED_RESCHED already set from new task
@@ -1890,8 +1923,15 @@
update_curr(cfs_rq);
find_matching_se(&se, &pse);
BUG_ON(!pse);
- if (wakeup_preempt_entity(se, pse) == 1)
+ if (wakeup_preempt_entity(se, pse) == 1) {
+ /*
+ * Bias pick_next to pick the sched entity that is
+ * triggering this preemption.
+ */
+ if (!next_buddy_marked)
+ set_next_buddy(pse);
goto preempt;
+ }
return;
@@ -2102,7 +2142,7 @@
balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
unsigned long max_load_move, struct sched_domain *sd,
enum cpu_idle_type idle, int *all_pinned,
- int *this_best_prio, struct cfs_rq *busiest_cfs_rq)
+ struct cfs_rq *busiest_cfs_rq)
{
int loops = 0, pulled = 0;
long rem_load_move = max_load_move;
@@ -2140,9 +2180,6 @@
*/
if (rem_load_move <= 0)
break;
-
- if (p->prio < *this_best_prio)
- *this_best_prio = p->prio;
}
out:
/*
@@ -2202,7 +2239,7 @@
load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
unsigned long max_load_move,
struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
+ int *all_pinned)
{
long rem_load_move = max_load_move;
int busiest_cpu = cpu_of(busiest);
@@ -2227,7 +2264,7 @@
rem_load = div_u64(rem_load, busiest_h_load + 1);
moved_load = balance_tasks(this_rq, this_cpu, busiest,
- rem_load, sd, idle, all_pinned, this_best_prio,
+ rem_load, sd, idle, all_pinned,
busiest_cfs_rq);
if (!moved_load)
@@ -2253,11 +2290,11 @@
load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
unsigned long max_load_move,
struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
+ int *all_pinned)
{
return balance_tasks(this_rq, this_cpu, busiest,
max_load_move, sd, idle, all_pinned,
- this_best_prio, &busiest->cfs);
+ &busiest->cfs);
}
#endif
@@ -2274,12 +2311,11 @@
int *all_pinned)
{
unsigned long total_load_moved = 0, load_moved;
- int this_best_prio = this_rq->curr->prio;
do {
load_moved = load_balance_fair(this_rq, this_cpu, busiest,
max_load_move - total_load_moved,
- sd, idle, all_pinned, &this_best_prio);
+ sd, idle, all_pinned);
total_load_moved += load_moved;
@@ -2648,7 +2684,7 @@
/*
* Only siblings can have significantly less than SCHED_LOAD_SCALE
*/
- if (sd->level != SD_LV_SIBLING)
+ if (!(sd->flags & SD_SHARE_CPUPOWER))
return 0;
/*
@@ -3465,6 +3501,7 @@
raw_spin_unlock(&this_rq->lock);
update_shares(this_cpu);
+ rcu_read_lock();
for_each_domain(this_cpu, sd) {
unsigned long interval;
int balance = 1;
@@ -3486,6 +3523,7 @@
break;
}
}
+ rcu_read_unlock();
raw_spin_lock(&this_rq->lock);
@@ -3534,6 +3572,7 @@
double_lock_balance(busiest_rq, target_rq);
/* Search for an sd spanning us and the target CPU. */
+ rcu_read_lock();
for_each_domain(target_cpu, sd) {
if ((sd->flags & SD_LOAD_BALANCE) &&
cpumask_test_cpu(busiest_cpu, sched_domain_span(sd)))
@@ -3549,6 +3588,7 @@
else
schedstat_inc(sd, alb_failed);
}
+ rcu_read_unlock();
double_unlock_balance(busiest_rq, target_rq);
out_unlock:
busiest_rq->active_balance = 0;
@@ -3675,6 +3715,7 @@
{
struct sched_domain *sd;
struct sched_group *ilb_group;
+ int ilb = nr_cpu_ids;
/*
* Have idle load balancer selection from semi-idle packages only
@@ -3690,20 +3731,25 @@
if (cpumask_weight(nohz.idle_cpus_mask) < 2)
goto out_done;
+ rcu_read_lock();
for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
ilb_group = sd->groups;
do {
- if (is_semi_idle_group(ilb_group))
- return cpumask_first(nohz.grp_idle_mask);
+ if (is_semi_idle_group(ilb_group)) {
+ ilb = cpumask_first(nohz.grp_idle_mask);
+ goto unlock;
+ }
ilb_group = ilb_group->next;
} while (ilb_group != sd->groups);
}
+unlock:
+ rcu_read_unlock();
out_done:
- return nr_cpu_ids;
+ return ilb;
}
#else /* (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
static inline int find_new_ilb(int call_cpu)
@@ -3848,6 +3894,7 @@
update_shares(cpu);
+ rcu_read_lock();
for_each_domain(cpu, sd) {
if (!(sd->flags & SD_LOAD_BALANCE))
continue;
@@ -3893,6 +3940,7 @@
if (!balance)
break;
}
+ rcu_read_unlock();
/*
* next_balance will be updated only when there is a need.
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 68e69ac..be40f73 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -64,3 +64,9 @@
* Decrement CPU power based on irq activity
*/
SCHED_FEAT(NONIRQ_POWER, 1)
+
+/*
+ * Queue remote wakeups on the target CPU and process them
+ * using the scheduler IPI. Reduces rq->lock contention/bounces.
+ */
+SCHED_FEAT(TTWU_QUEUE, 1)
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index a776a63..0a51882 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -7,7 +7,7 @@
#ifdef CONFIG_SMP
static int
-select_task_rq_idle(struct rq *rq, struct task_struct *p, int sd_flag, int flags)
+select_task_rq_idle(struct task_struct *p, int sd_flag, int flags)
{
return task_cpu(p); /* IDLE tasks as never migrated */
}
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index e7cebdc..64b2a37 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -183,6 +183,14 @@
return ktime_to_ns(rt_rq->tg->rt_bandwidth.rt_period);
}
+typedef struct task_group *rt_rq_iter_t;
+
+#define for_each_rt_rq(rt_rq, iter, rq) \
+ for (iter = list_entry_rcu(task_groups.next, typeof(*iter), list); \
+ (&iter->list != &task_groups) && \
+ (rt_rq = iter->rt_rq[cpu_of(rq)]); \
+ iter = list_entry_rcu(iter->list.next, typeof(*iter), list))
+
static inline void list_add_leaf_rt_rq(struct rt_rq *rt_rq)
{
list_add_rcu(&rt_rq->leaf_rt_rq_list,
@@ -288,6 +296,11 @@
return ktime_to_ns(def_rt_bandwidth.rt_period);
}
+typedef struct rt_rq *rt_rq_iter_t;
+
+#define for_each_rt_rq(rt_rq, iter, rq) \
+ for ((void) iter, rt_rq = &rq->rt; rt_rq; rt_rq = NULL)
+
static inline void list_add_leaf_rt_rq(struct rt_rq *rt_rq)
{
}
@@ -402,12 +415,13 @@
static void __disable_runtime(struct rq *rq)
{
struct root_domain *rd = rq->rd;
+ rt_rq_iter_t iter;
struct rt_rq *rt_rq;
if (unlikely(!scheduler_running))
return;
- for_each_leaf_rt_rq(rt_rq, rq) {
+ for_each_rt_rq(rt_rq, iter, rq) {
struct rt_bandwidth *rt_b = sched_rt_bandwidth(rt_rq);
s64 want;
int i;
@@ -487,6 +501,7 @@
static void __enable_runtime(struct rq *rq)
{
+ rt_rq_iter_t iter;
struct rt_rq *rt_rq;
if (unlikely(!scheduler_running))
@@ -495,7 +510,7 @@
/*
* Reset each runqueue's bandwidth settings
*/
- for_each_leaf_rt_rq(rt_rq, rq) {
+ for_each_rt_rq(rt_rq, iter, rq) {
struct rt_bandwidth *rt_b = sched_rt_bandwidth(rt_rq);
raw_spin_lock(&rt_b->rt_runtime_lock);
@@ -562,6 +577,13 @@
if (rt_rq->rt_throttled && rt_rq->rt_time < runtime) {
rt_rq->rt_throttled = 0;
enqueue = 1;
+
+ /*
+ * Force a clock update if the CPU was idle,
+ * lest wakeup -> unthrottle time accumulate.
+ */
+ if (rt_rq->rt_nr_running && rq->curr == rq->idle)
+ rq->skip_clock_update = -1;
}
if (rt_rq->rt_time || rt_rq->rt_nr_running)
idle = 0;
@@ -977,13 +999,23 @@
static int find_lowest_rq(struct task_struct *task);
static int
-select_task_rq_rt(struct rq *rq, struct task_struct *p, int sd_flag, int flags)
+select_task_rq_rt(struct task_struct *p, int sd_flag, int flags)
{
+ struct task_struct *curr;
+ struct rq *rq;
+ int cpu;
+
if (sd_flag != SD_BALANCE_WAKE)
return smp_processor_id();
+ cpu = task_cpu(p);
+ rq = cpu_rq(cpu);
+
+ rcu_read_lock();
+ curr = ACCESS_ONCE(rq->curr); /* unlocked access */
+
/*
- * If the current task is an RT task, then
+ * If the current task on @p's runqueue is an RT task, then
* try to see if we can wake this RT task up on another
* runqueue. Otherwise simply start this RT task
* on its current runqueue.
@@ -997,21 +1029,25 @@
* lock?
*
* For equal prio tasks, we just let the scheduler sort it out.
- */
- if (unlikely(rt_task(rq->curr)) &&
- (rq->curr->rt.nr_cpus_allowed < 2 ||
- rq->curr->prio < p->prio) &&
- (p->rt.nr_cpus_allowed > 1)) {
- int cpu = find_lowest_rq(p);
-
- return (cpu == -1) ? task_cpu(p) : cpu;
- }
-
- /*
+ *
* Otherwise, just let it ride on the affined RQ and the
* post-schedule router will push the preempted task away
+ *
+ * This test is optimistic, if we get it wrong the load-balancer
+ * will have to sort it out.
*/
- return task_cpu(p);
+ if (curr && unlikely(rt_task(curr)) &&
+ (curr->rt.nr_cpus_allowed < 2 ||
+ curr->prio < p->prio) &&
+ (p->rt.nr_cpus_allowed > 1)) {
+ int target = find_lowest_rq(p);
+
+ if (target != -1)
+ cpu = target;
+ }
+ rcu_read_unlock();
+
+ return cpu;
}
static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
@@ -1136,7 +1172,7 @@
* The previous task needs to be made eligible for pushing
* if it is still active
*/
- if (p->se.on_rq && p->rt.nr_cpus_allowed > 1)
+ if (on_rt_rq(&p->rt) && p->rt.nr_cpus_allowed > 1)
enqueue_pushable_task(rq, p);
}
@@ -1287,7 +1323,7 @@
!cpumask_test_cpu(lowest_rq->cpu,
&task->cpus_allowed) ||
task_running(rq, task) ||
- !task->se.on_rq)) {
+ !task->on_rq)) {
raw_spin_unlock(&lowest_rq->lock);
lowest_rq = NULL;
@@ -1321,7 +1357,7 @@
BUG_ON(task_current(rq, p));
BUG_ON(p->rt.nr_cpus_allowed <= 1);
- BUG_ON(!p->se.on_rq);
+ BUG_ON(!p->on_rq);
BUG_ON(!rt_task(p));
return p;
@@ -1467,7 +1503,7 @@
*/
if (p && (p->prio < this_rq->rt.highest_prio.curr)) {
WARN_ON(p == src_rq->curr);
- WARN_ON(!p->se.on_rq);
+ WARN_ON(!p->on_rq);
/*
* There's a chance that p is higher in priority
@@ -1538,7 +1574,7 @@
* Update the migration status of the RQ if we have an RT task
* which is running AND changing its weight value.
*/
- if (p->se.on_rq && (weight != p->rt.nr_cpus_allowed)) {
+ if (p->on_rq && (weight != p->rt.nr_cpus_allowed)) {
struct rq *rq = task_rq(p);
if (!task_current(rq, p)) {
@@ -1608,7 +1644,7 @@
* we may need to handle the pulling of RT tasks
* now.
*/
- if (p->se.on_rq && !rq->rt.rt_nr_running)
+ if (p->on_rq && !rq->rt.rt_nr_running)
pull_rt_task(rq);
}
@@ -1638,7 +1674,7 @@
* If that current running task is also an RT task
* then see if we can move to another run queue.
*/
- if (p->se.on_rq && rq->curr != p) {
+ if (p->on_rq && rq->curr != p) {
#ifdef CONFIG_SMP
if (rq->rt.overloaded && push_rt_task(rq) &&
/* Don't resched if we changed runqueues */
@@ -1657,7 +1693,7 @@
static void
prio_changed_rt(struct rq *rq, struct task_struct *p, int oldprio)
{
- if (!p->se.on_rq)
+ if (!p->on_rq)
return;
if (rq->curr == p) {
@@ -1796,10 +1832,11 @@
static void print_rt_stats(struct seq_file *m, int cpu)
{
+ rt_rq_iter_t iter;
struct rt_rq *rt_rq;
rcu_read_lock();
- for_each_leaf_rt_rq(rt_rq, cpu_rq(cpu))
+ for_each_rt_rq(rt_rq, iter, cpu_rq(cpu))
print_rt_rq(m, cpu, rt_rq);
rcu_read_unlock();
}
diff --git a/kernel/sched_stoptask.c b/kernel/sched_stoptask.c
index 1ba2bd4..6f43763 100644
--- a/kernel/sched_stoptask.c
+++ b/kernel/sched_stoptask.c
@@ -9,8 +9,7 @@
#ifdef CONFIG_SMP
static int
-select_task_rq_stop(struct rq *rq, struct task_struct *p,
- int sd_flag, int flags)
+select_task_rq_stop(struct task_struct *p, int sd_flag, int flags)
{
return task_cpu(p); /* stop tasks as never migrate */
}
@@ -26,7 +25,7 @@
{
struct task_struct *stop = rq->stop;
- if (stop && stop->se.on_rq)
+ if (stop && stop->on_rq)
return stop;
return NULL;
diff --git a/kernel/signal.c b/kernel/signal.c
index 7165af5..ad5e818 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -124,7 +124,7 @@
static int recalc_sigpending_tsk(struct task_struct *t)
{
- if (t->signal->group_stop_count > 0 ||
+ if ((t->group_stop & GROUP_STOP_PENDING) ||
PENDING(&t->pending, &t->blocked) ||
PENDING(&t->signal->shared_pending, &t->blocked)) {
set_tsk_thread_flag(t, TIF_SIGPENDING);
@@ -223,6 +223,83 @@
current->comm, current->pid, sig);
}
+/**
+ * task_clear_group_stop_trapping - clear group stop trapping bit
+ * @task: target task
+ *
+ * If GROUP_STOP_TRAPPING is set, a ptracer is waiting for us. Clear it
+ * and wake up the ptracer. Note that we don't need any further locking.
+ * @task->siglock guarantees that @task->parent points to the ptracer.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ */
+static void task_clear_group_stop_trapping(struct task_struct *task)
+{
+ if (unlikely(task->group_stop & GROUP_STOP_TRAPPING)) {
+ task->group_stop &= ~GROUP_STOP_TRAPPING;
+ __wake_up_sync_key(&task->parent->signal->wait_chldexit,
+ TASK_UNINTERRUPTIBLE, 1, task);
+ }
+}
+
+/**
+ * task_clear_group_stop_pending - clear pending group stop
+ * @task: target task
+ *
+ * Clear group stop states for @task.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ */
+void task_clear_group_stop_pending(struct task_struct *task)
+{
+ task->group_stop &= ~(GROUP_STOP_PENDING | GROUP_STOP_CONSUME |
+ GROUP_STOP_DEQUEUED);
+}
+
+/**
+ * task_participate_group_stop - participate in a group stop
+ * @task: task participating in a group stop
+ *
+ * @task has GROUP_STOP_PENDING set and is participating in a group stop.
+ * Group stop states are cleared and the group stop count is consumed if
+ * %GROUP_STOP_CONSUME was set. If the consumption completes the group
+ * stop, the appropriate %SIGNAL_* flags are set.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ *
+ * RETURNS:
+ * %true if group stop completion should be notified to the parent, %false
+ * otherwise.
+ */
+static bool task_participate_group_stop(struct task_struct *task)
+{
+ struct signal_struct *sig = task->signal;
+ bool consume = task->group_stop & GROUP_STOP_CONSUME;
+
+ WARN_ON_ONCE(!(task->group_stop & GROUP_STOP_PENDING));
+
+ task_clear_group_stop_pending(task);
+
+ if (!consume)
+ return false;
+
+ if (!WARN_ON_ONCE(sig->group_stop_count == 0))
+ sig->group_stop_count--;
+
+ /*
+ * Tell the caller to notify completion iff we are entering into a
+ * fresh group stop. Read comment in do_signal_stop() for details.
+ */
+ if (!sig->group_stop_count && !(sig->flags & SIGNAL_STOP_STOPPED)) {
+ sig->flags = SIGNAL_STOP_STOPPED;
+ return true;
+ }
+ return false;
+}
+
/*
* allocate a new signal queue record
* - this may be called without locks if and only if t == current, otherwise an
@@ -527,7 +604,7 @@
* is to alert stop-signal processing code when another
* processor has come along and cleared the flag.
*/
- tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
+ current->group_stop |= GROUP_STOP_DEQUEUED;
}
if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
/*
@@ -592,7 +669,7 @@
if (sigisemptyset(&m))
return 0;
- signandsets(&s->signal, &s->signal, mask);
+ sigandnsets(&s->signal, &s->signal, mask);
list_for_each_entry_safe(q, n, &s->list, list) {
if (sigismember(mask, q->info.si_signo)) {
list_del_init(&q->list);
@@ -727,34 +804,14 @@
} else if (sig == SIGCONT) {
unsigned int why;
/*
- * Remove all stop signals from all queues,
- * and wake all threads.
+ * Remove all stop signals from all queues, wake all threads.
*/
rm_from_queue(SIG_KERNEL_STOP_MASK, &signal->shared_pending);
t = p;
do {
- unsigned int state;
+ task_clear_group_stop_pending(t);
rm_from_queue(SIG_KERNEL_STOP_MASK, &t->pending);
- /*
- * If there is a handler for SIGCONT, we must make
- * sure that no thread returns to user mode before
- * we post the signal, in case it was the only
- * thread eligible to run the signal handler--then
- * it must not do anything between resuming and
- * running the handler. With the TIF_SIGPENDING
- * flag set, the thread will pause and acquire the
- * siglock that we hold now and until we've queued
- * the pending signal.
- *
- * Wake up the stopped thread _after_ setting
- * TIF_SIGPENDING
- */
- state = __TASK_STOPPED;
- if (sig_user_defined(t, SIGCONT) && !sigismember(&t->blocked, SIGCONT)) {
- set_tsk_thread_flag(t, TIF_SIGPENDING);
- state |= TASK_INTERRUPTIBLE;
- }
- wake_up_state(t, state);
+ wake_up_state(t, __TASK_STOPPED);
} while_each_thread(p, t);
/*
@@ -780,13 +837,6 @@
signal->flags = why | SIGNAL_STOP_CONTINUED;
signal->group_stop_count = 0;
signal->group_exit_code = 0;
- } else {
- /*
- * We are not stopped, but there could be a stop
- * signal in the middle of being processed after
- * being removed from the queue. Clear that too.
- */
- signal->flags &= ~SIGNAL_STOP_DEQUEUED;
}
}
@@ -875,6 +925,7 @@
signal->group_stop_count = 0;
t = p;
do {
+ task_clear_group_stop_pending(t);
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
} while_each_thread(p, t);
@@ -1109,6 +1160,7 @@
p->signal->group_stop_count = 0;
while_each_thread(p, t) {
+ task_clear_group_stop_pending(t);
count++;
/* Don't bother with already dead threads */
@@ -1536,16 +1588,30 @@
return ret;
}
-static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
+/**
+ * do_notify_parent_cldstop - notify parent of stopped/continued state change
+ * @tsk: task reporting the state change
+ * @for_ptracer: the notification is for ptracer
+ * @why: CLD_{CONTINUED|STOPPED|TRAPPED} to report
+ *
+ * Notify @tsk's parent that the stopped/continued state has changed. If
+ * @for_ptracer is %false, @tsk's group leader notifies to its real parent.
+ * If %true, @tsk reports to @tsk->parent which should be the ptracer.
+ *
+ * CONTEXT:
+ * Must be called with tasklist_lock at least read locked.
+ */
+static void do_notify_parent_cldstop(struct task_struct *tsk,
+ bool for_ptracer, int why)
{
struct siginfo info;
unsigned long flags;
struct task_struct *parent;
struct sighand_struct *sighand;
- if (task_ptrace(tsk))
+ if (for_ptracer) {
parent = tsk->parent;
- else {
+ } else {
tsk = tsk->group_leader;
parent = tsk->real_parent;
}
@@ -1621,6 +1687,15 @@
}
/*
+ * Test whether the target task of the usual cldstop notification - the
+ * real_parent of @child - is in the same group as the ptracer.
+ */
+static bool real_parent_is_ptracer(struct task_struct *child)
+{
+ return same_thread_group(child->parent, child->real_parent);
+}
+
+/*
* This must be called with current->sighand->siglock held.
*
* This should be the path for all ptrace stops.
@@ -1631,10 +1706,12 @@
* If we actually decide not to stop at all because the tracer
* is gone, we keep current->exit_code unless clear_code.
*/
-static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
+static void ptrace_stop(int exit_code, int why, int clear_code, siginfo_t *info)
__releases(¤t->sighand->siglock)
__acquires(¤t->sighand->siglock)
{
+ bool gstop_done = false;
+
if (arch_ptrace_stop_needed(exit_code, info)) {
/*
* The arch code has something special to do before a
@@ -1655,21 +1732,49 @@
}
/*
- * If there is a group stop in progress,
- * we must participate in the bookkeeping.
+ * If @why is CLD_STOPPED, we're trapping to participate in a group
+ * stop. Do the bookkeeping. Note that if SIGCONT was delievered
+ * while siglock was released for the arch hook, PENDING could be
+ * clear now. We act as if SIGCONT is received after TASK_TRACED
+ * is entered - ignore it.
*/
- if (current->signal->group_stop_count > 0)
- --current->signal->group_stop_count;
+ if (why == CLD_STOPPED && (current->group_stop & GROUP_STOP_PENDING))
+ gstop_done = task_participate_group_stop(current);
current->last_siginfo = info;
current->exit_code = exit_code;
- /* Let the debugger run. */
- __set_current_state(TASK_TRACED);
+ /*
+ * TRACED should be visible before TRAPPING is cleared; otherwise,
+ * the tracer might fail do_wait().
+ */
+ set_current_state(TASK_TRACED);
+
+ /*
+ * We're committing to trapping. Clearing GROUP_STOP_TRAPPING and
+ * transition to TASK_TRACED should be atomic with respect to
+ * siglock. This hsould be done after the arch hook as siglock is
+ * released and regrabbed across it.
+ */
+ task_clear_group_stop_trapping(current);
+
spin_unlock_irq(¤t->sighand->siglock);
read_lock(&tasklist_lock);
if (may_ptrace_stop()) {
- do_notify_parent_cldstop(current, CLD_TRAPPED);
+ /*
+ * Notify parents of the stop.
+ *
+ * While ptraced, there are two parents - the ptracer and
+ * the real_parent of the group_leader. The ptracer should
+ * know about every stop while the real parent is only
+ * interested in the completion of group stop. The states
+ * for the two don't interact with each other. Notify
+ * separately unless they're gonna be duplicates.
+ */
+ do_notify_parent_cldstop(current, true, why);
+ if (gstop_done && !real_parent_is_ptracer(current))
+ do_notify_parent_cldstop(current, false, why);
+
/*
* Don't want to allow preemption here, because
* sys_ptrace() needs this task to be inactive.
@@ -1684,7 +1789,16 @@
/*
* By the time we got the lock, our tracer went away.
* Don't drop the lock yet, another tracer may come.
+ *
+ * If @gstop_done, the ptracer went away between group stop
+ * completion and here. During detach, it would have set
+ * GROUP_STOP_PENDING on us and we'll re-enter TASK_STOPPED
+ * in do_signal_stop() on return, so notifying the real
+ * parent of the group stop completion is enough.
*/
+ if (gstop_done)
+ do_notify_parent_cldstop(current, false, why);
+
__set_current_state(TASK_RUNNING);
if (clear_code)
current->exit_code = 0;
@@ -1728,7 +1842,7 @@
/* Let the debugger run. */
spin_lock_irq(¤t->sighand->siglock);
- ptrace_stop(exit_code, 1, &info);
+ ptrace_stop(exit_code, CLD_TRAPPED, 1, &info);
spin_unlock_irq(¤t->sighand->siglock);
}
@@ -1741,66 +1855,115 @@
static int do_signal_stop(int signr)
{
struct signal_struct *sig = current->signal;
- int notify;
- if (!sig->group_stop_count) {
+ if (!(current->group_stop & GROUP_STOP_PENDING)) {
+ unsigned int gstop = GROUP_STOP_PENDING | GROUP_STOP_CONSUME;
struct task_struct *t;
- if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
+ /* signr will be recorded in task->group_stop for retries */
+ WARN_ON_ONCE(signr & ~GROUP_STOP_SIGMASK);
+
+ if (!likely(current->group_stop & GROUP_STOP_DEQUEUED) ||
unlikely(signal_group_exit(sig)))
return 0;
/*
- * There is no group stop already in progress.
- * We must initiate one now.
+ * There is no group stop already in progress. We must
+ * initiate one now.
+ *
+ * While ptraced, a task may be resumed while group stop is
+ * still in effect and then receive a stop signal and
+ * initiate another group stop. This deviates from the
+ * usual behavior as two consecutive stop signals can't
+ * cause two group stops when !ptraced. That is why we
+ * also check !task_is_stopped(t) below.
+ *
+ * The condition can be distinguished by testing whether
+ * SIGNAL_STOP_STOPPED is already set. Don't generate
+ * group_exit_code in such case.
+ *
+ * This is not necessary for SIGNAL_STOP_CONTINUED because
+ * an intervening stop signal is required to cause two
+ * continued events regardless of ptrace.
*/
- sig->group_exit_code = signr;
+ if (!(sig->flags & SIGNAL_STOP_STOPPED))
+ sig->group_exit_code = signr;
+ else
+ WARN_ON_ONCE(!task_ptrace(current));
+ current->group_stop &= ~GROUP_STOP_SIGMASK;
+ current->group_stop |= signr | gstop;
sig->group_stop_count = 1;
- for (t = next_thread(current); t != current; t = next_thread(t))
+ for (t = next_thread(current); t != current;
+ t = next_thread(t)) {
+ t->group_stop &= ~GROUP_STOP_SIGMASK;
/*
* Setting state to TASK_STOPPED for a group
* stop is always done with the siglock held,
* so this check has no races.
*/
- if (!(t->flags & PF_EXITING) &&
- !task_is_stopped_or_traced(t)) {
+ if (!(t->flags & PF_EXITING) && !task_is_stopped(t)) {
+ t->group_stop |= signr | gstop;
sig->group_stop_count++;
signal_wake_up(t, 0);
}
+ }
}
- /*
- * If there are no other threads in the group, or if there is
- * a group stop in progress and we are the last to stop, report
- * to the parent. When ptraced, every thread reports itself.
- */
- notify = sig->group_stop_count == 1 ? CLD_STOPPED : 0;
- notify = tracehook_notify_jctl(notify, CLD_STOPPED);
- /*
- * tracehook_notify_jctl() can drop and reacquire siglock, so
- * we keep ->group_stop_count != 0 before the call. If SIGCONT
- * or SIGKILL comes in between ->group_stop_count == 0.
- */
- if (sig->group_stop_count) {
- if (!--sig->group_stop_count)
- sig->flags = SIGNAL_STOP_STOPPED;
- current->exit_code = sig->group_exit_code;
+retry:
+ if (likely(!task_ptrace(current))) {
+ int notify = 0;
+
+ /*
+ * If there are no other threads in the group, or if there
+ * is a group stop in progress and we are the last to stop,
+ * report to the parent.
+ */
+ if (task_participate_group_stop(current))
+ notify = CLD_STOPPED;
+
__set_current_state(TASK_STOPPED);
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ /*
+ * Notify the parent of the group stop completion. Because
+ * we're not holding either the siglock or tasklist_lock
+ * here, ptracer may attach inbetween; however, this is for
+ * group stop and should always be delivered to the real
+ * parent of the group leader. The new ptracer will get
+ * its notification when this task transitions into
+ * TASK_TRACED.
+ */
+ if (notify) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(current, false, notify);
+ read_unlock(&tasklist_lock);
+ }
+
+ /* Now we don't run again until woken by SIGCONT or SIGKILL */
+ schedule();
+
+ spin_lock_irq(¤t->sighand->siglock);
+ } else {
+ ptrace_stop(current->group_stop & GROUP_STOP_SIGMASK,
+ CLD_STOPPED, 0, NULL);
+ current->exit_code = 0;
}
+
+ /*
+ * GROUP_STOP_PENDING could be set if another group stop has
+ * started since being woken up or ptrace wants us to transit
+ * between TASK_STOPPED and TRACED. Retry group stop.
+ */
+ if (current->group_stop & GROUP_STOP_PENDING) {
+ WARN_ON_ONCE(!(current->group_stop & GROUP_STOP_SIGMASK));
+ goto retry;
+ }
+
+ /* PTRACE_ATTACH might have raced with task killing, clear trapping */
+ task_clear_group_stop_trapping(current);
+
spin_unlock_irq(¤t->sighand->siglock);
- if (notify) {
- read_lock(&tasklist_lock);
- do_notify_parent_cldstop(current, notify);
- read_unlock(&tasklist_lock);
- }
-
- /* Now we don't run again until woken by SIGCONT or SIGKILL */
- do {
- schedule();
- } while (try_to_freeze());
-
tracehook_finish_jctl();
- current->exit_code = 0;
return 1;
}
@@ -1814,7 +1977,7 @@
ptrace_signal_deliver(regs, cookie);
/* Let the debugger run. */
- ptrace_stop(signr, 0, info);
+ ptrace_stop(signr, CLD_TRAPPED, 0, info);
/* We're back. Did the debugger cancel the sig? */
signr = current->exit_code;
@@ -1869,18 +2032,36 @@
* the CLD_ si_code into SIGNAL_CLD_MASK bits.
*/
if (unlikely(signal->flags & SIGNAL_CLD_MASK)) {
- int why = (signal->flags & SIGNAL_STOP_CONTINUED)
- ? CLD_CONTINUED : CLD_STOPPED;
+ struct task_struct *leader;
+ int why;
+
+ if (signal->flags & SIGNAL_CLD_CONTINUED)
+ why = CLD_CONTINUED;
+ else
+ why = CLD_STOPPED;
+
signal->flags &= ~SIGNAL_CLD_MASK;
- why = tracehook_notify_jctl(why, CLD_CONTINUED);
spin_unlock_irq(&sighand->siglock);
- if (why) {
- read_lock(&tasklist_lock);
- do_notify_parent_cldstop(current->group_leader, why);
- read_unlock(&tasklist_lock);
- }
+ /*
+ * Notify the parent that we're continuing. This event is
+ * always per-process and doesn't make whole lot of sense
+ * for ptracers, who shouldn't consume the state via
+ * wait(2) either, but, for backward compatibility, notify
+ * the ptracer of the group leader too unless it's gonna be
+ * a duplicate.
+ */
+ read_lock(&tasklist_lock);
+
+ do_notify_parent_cldstop(current, false, why);
+
+ leader = current->group_leader;
+ if (task_ptrace(leader) && !real_parent_is_ptracer(leader))
+ do_notify_parent_cldstop(leader, true, why);
+
+ read_unlock(&tasklist_lock);
+
goto relock;
}
@@ -1897,8 +2078,8 @@
if (unlikely(signr != 0))
ka = return_ka;
else {
- if (unlikely(signal->group_stop_count > 0) &&
- do_signal_stop(0))
+ if (unlikely(current->group_stop &
+ GROUP_STOP_PENDING) && do_signal_stop(0))
goto relock;
signr = dequeue_signal(current, ¤t->blocked,
@@ -2017,10 +2198,42 @@
return signr;
}
+/*
+ * It could be that complete_signal() picked us to notify about the
+ * group-wide signal. Other threads should be notified now to take
+ * the shared signals in @which since we will not.
+ */
+static void retarget_shared_pending(struct task_struct *tsk, sigset_t *which)
+{
+ sigset_t retarget;
+ struct task_struct *t;
+
+ sigandsets(&retarget, &tsk->signal->shared_pending.signal, which);
+ if (sigisemptyset(&retarget))
+ return;
+
+ t = tsk;
+ while_each_thread(tsk, t) {
+ if (t->flags & PF_EXITING)
+ continue;
+
+ if (!has_pending_signals(&retarget, &t->blocked))
+ continue;
+ /* Remove the signals this thread can handle. */
+ sigandsets(&retarget, &retarget, &t->blocked);
+
+ if (!signal_pending(t))
+ signal_wake_up(t, 0);
+
+ if (sigisemptyset(&retarget))
+ break;
+ }
+}
+
void exit_signals(struct task_struct *tsk)
{
int group_stop = 0;
- struct task_struct *t;
+ sigset_t unblocked;
if (thread_group_empty(tsk) || signal_group_exit(tsk->signal)) {
tsk->flags |= PF_EXITING;
@@ -2036,26 +2249,23 @@
if (!signal_pending(tsk))
goto out;
- /*
- * It could be that __group_complete_signal() choose us to
- * notify about group-wide signal. Another thread should be
- * woken now to take the signal since we will not.
- */
- for (t = tsk; (t = next_thread(t)) != tsk; )
- if (!signal_pending(t) && !(t->flags & PF_EXITING))
- recalc_sigpending_and_wake(t);
+ unblocked = tsk->blocked;
+ signotset(&unblocked);
+ retarget_shared_pending(tsk, &unblocked);
- if (unlikely(tsk->signal->group_stop_count) &&
- !--tsk->signal->group_stop_count) {
- tsk->signal->flags = SIGNAL_STOP_STOPPED;
- group_stop = tracehook_notify_jctl(CLD_STOPPED, CLD_STOPPED);
- }
+ if (unlikely(tsk->group_stop & GROUP_STOP_PENDING) &&
+ task_participate_group_stop(tsk))
+ group_stop = CLD_STOPPED;
out:
spin_unlock_irq(&tsk->sighand->siglock);
+ /*
+ * If group stop has completed, deliver the notification. This
+ * should always go to the real parent of the group leader.
+ */
if (unlikely(group_stop)) {
read_lock(&tasklist_lock);
- do_notify_parent_cldstop(tsk, group_stop);
+ do_notify_parent_cldstop(tsk, false, group_stop);
read_unlock(&tasklist_lock);
}
}
@@ -2089,11 +2299,33 @@
return -EINTR;
}
-/*
- * We don't need to get the kernel lock - this is all local to this
- * particular thread.. (and that's good, because this is _heavily_
- * used by various programs)
+static void __set_task_blocked(struct task_struct *tsk, const sigset_t *newset)
+{
+ if (signal_pending(tsk) && !thread_group_empty(tsk)) {
+ sigset_t newblocked;
+ /* A set of now blocked but previously unblocked signals. */
+ sigandnsets(&newblocked, newset, ¤t->blocked);
+ retarget_shared_pending(tsk, &newblocked);
+ }
+ tsk->blocked = *newset;
+ recalc_sigpending();
+}
+
+/**
+ * set_current_blocked - change current->blocked mask
+ * @newset: new mask
+ *
+ * It is wrong to change ->blocked directly, this helper should be used
+ * to ensure the process can't miss a shared signal we are going to block.
*/
+void set_current_blocked(const sigset_t *newset)
+{
+ struct task_struct *tsk = current;
+
+ spin_lock_irq(&tsk->sighand->siglock);
+ __set_task_blocked(tsk, newset);
+ spin_unlock_irq(&tsk->sighand->siglock);
+}
/*
* This is also useful for kernel threads that want to temporarily
@@ -2105,30 +2337,29 @@
*/
int sigprocmask(int how, sigset_t *set, sigset_t *oldset)
{
- int error;
+ struct task_struct *tsk = current;
+ sigset_t newset;
- spin_lock_irq(¤t->sighand->siglock);
+ /* Lockless, only current can change ->blocked, never from irq */
if (oldset)
- *oldset = current->blocked;
+ *oldset = tsk->blocked;
- error = 0;
switch (how) {
case SIG_BLOCK:
- sigorsets(¤t->blocked, ¤t->blocked, set);
+ sigorsets(&newset, &tsk->blocked, set);
break;
case SIG_UNBLOCK:
- signandsets(¤t->blocked, ¤t->blocked, set);
+ sigandnsets(&newset, &tsk->blocked, set);
break;
case SIG_SETMASK:
- current->blocked = *set;
+ newset = *set;
break;
default:
- error = -EINVAL;
+ return -EINVAL;
}
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- return error;
+ set_current_blocked(&newset);
+ return 0;
}
/**
@@ -2138,40 +2369,34 @@
* @oset: previous value of signal mask if non-null
* @sigsetsize: size of sigset_t type
*/
-SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
+SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, nset,
sigset_t __user *, oset, size_t, sigsetsize)
{
- int error = -EINVAL;
sigset_t old_set, new_set;
+ int error;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
- goto out;
+ return -EINVAL;
- if (set) {
- error = -EFAULT;
- if (copy_from_user(&new_set, set, sizeof(*set)))
- goto out;
+ old_set = current->blocked;
+
+ if (nset) {
+ if (copy_from_user(&new_set, nset, sizeof(sigset_t)))
+ return -EFAULT;
sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP));
- error = sigprocmask(how, &new_set, &old_set);
+ error = sigprocmask(how, &new_set, NULL);
if (error)
- goto out;
- if (oset)
- goto set_old;
- } else if (oset) {
- spin_lock_irq(¤t->sighand->siglock);
- old_set = current->blocked;
- spin_unlock_irq(¤t->sighand->siglock);
-
- set_old:
- error = -EFAULT;
- if (copy_to_user(oset, &old_set, sizeof(*oset)))
- goto out;
+ return error;
}
- error = 0;
-out:
- return error;
+
+ if (oset) {
+ if (copy_to_user(oset, &old_set, sizeof(sigset_t)))
+ return -EFAULT;
+ }
+
+ return 0;
}
long do_sigpending(void __user *set, unsigned long sigsetsize)
@@ -2284,6 +2509,66 @@
#endif
/**
+ * do_sigtimedwait - wait for queued signals specified in @which
+ * @which: queued signals to wait for
+ * @info: if non-null, the signal's siginfo is returned here
+ * @ts: upper bound on process time suspension
+ */
+int do_sigtimedwait(const sigset_t *which, siginfo_t *info,
+ const struct timespec *ts)
+{
+ struct task_struct *tsk = current;
+ long timeout = MAX_SCHEDULE_TIMEOUT;
+ sigset_t mask = *which;
+ int sig;
+
+ if (ts) {
+ if (!timespec_valid(ts))
+ return -EINVAL;
+ timeout = timespec_to_jiffies(ts);
+ /*
+ * We can be close to the next tick, add another one
+ * to ensure we will wait at least the time asked for.
+ */
+ if (ts->tv_sec || ts->tv_nsec)
+ timeout++;
+ }
+
+ /*
+ * Invert the set of allowed signals to get those we want to block.
+ */
+ sigdelsetmask(&mask, sigmask(SIGKILL) | sigmask(SIGSTOP));
+ signotset(&mask);
+
+ spin_lock_irq(&tsk->sighand->siglock);
+ sig = dequeue_signal(tsk, &mask, info);
+ if (!sig && timeout) {
+ /*
+ * None ready, temporarily unblock those we're interested
+ * while we are sleeping in so that we'll be awakened when
+ * they arrive. Unblocking is always fine, we can avoid
+ * set_current_blocked().
+ */
+ tsk->real_blocked = tsk->blocked;
+ sigandsets(&tsk->blocked, &tsk->blocked, &mask);
+ recalc_sigpending();
+ spin_unlock_irq(&tsk->sighand->siglock);
+
+ timeout = schedule_timeout_interruptible(timeout);
+
+ spin_lock_irq(&tsk->sighand->siglock);
+ __set_task_blocked(tsk, &tsk->real_blocked);
+ siginitset(&tsk->real_blocked, 0);
+ sig = dequeue_signal(tsk, &mask, info);
+ }
+ spin_unlock_irq(&tsk->sighand->siglock);
+
+ if (sig)
+ return sig;
+ return timeout ? -EINTR : -EAGAIN;
+}
+
+/**
* sys_rt_sigtimedwait - synchronously wait for queued signals specified
* in @uthese
* @uthese: queued signals to wait for
@@ -2295,11 +2580,10 @@
siginfo_t __user *, uinfo, const struct timespec __user *, uts,
size_t, sigsetsize)
{
- int ret, sig;
sigset_t these;
struct timespec ts;
siginfo_t info;
- long timeout = 0;
+ int ret;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
@@ -2308,61 +2592,16 @@
if (copy_from_user(&these, uthese, sizeof(these)))
return -EFAULT;
- /*
- * Invert the set of allowed signals to get those we
- * want to block.
- */
- sigdelsetmask(&these, sigmask(SIGKILL)|sigmask(SIGSTOP));
- signotset(&these);
-
if (uts) {
if (copy_from_user(&ts, uts, sizeof(ts)))
return -EFAULT;
- if (ts.tv_nsec >= 1000000000L || ts.tv_nsec < 0
- || ts.tv_sec < 0)
- return -EINVAL;
}
- spin_lock_irq(¤t->sighand->siglock);
- sig = dequeue_signal(current, &these, &info);
- if (!sig) {
- timeout = MAX_SCHEDULE_TIMEOUT;
- if (uts)
- timeout = (timespec_to_jiffies(&ts)
- + (ts.tv_sec || ts.tv_nsec));
+ ret = do_sigtimedwait(&these, &info, uts ? &ts : NULL);
- if (timeout) {
- /*
- * None ready -- temporarily unblock those we're
- * interested while we are sleeping in so that we'll
- * be awakened when they arrive.
- */
- current->real_blocked = current->blocked;
- sigandsets(¤t->blocked, ¤t->blocked, &these);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- timeout = schedule_timeout_interruptible(timeout);
-
- spin_lock_irq(¤t->sighand->siglock);
- sig = dequeue_signal(current, &these, &info);
- current->blocked = current->real_blocked;
- siginitset(¤t->real_blocked, 0);
- recalc_sigpending();
- }
- }
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (sig) {
- ret = sig;
- if (uinfo) {
- if (copy_siginfo_to_user(uinfo, &info))
- ret = -EFAULT;
- }
- } else {
- ret = -EAGAIN;
- if (timeout)
- ret = -EINTR;
+ if (ret > 0 && uinfo) {
+ if (copy_siginfo_to_user(uinfo, &info))
+ ret = -EFAULT;
}
return ret;
@@ -2650,60 +2889,51 @@
/**
* sys_sigprocmask - examine and change blocked signals
* @how: whether to add, remove, or set signals
- * @set: signals to add or remove (if non-null)
+ * @nset: signals to add or remove (if non-null)
* @oset: previous value of signal mask if non-null
*
* Some platforms have their own version with special arguments;
* others support only sys_rt_sigprocmask.
*/
-SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
+SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, nset,
old_sigset_t __user *, oset)
{
- int error;
old_sigset_t old_set, new_set;
+ sigset_t new_blocked;
- if (set) {
- error = -EFAULT;
- if (copy_from_user(&new_set, set, sizeof(*set)))
- goto out;
+ old_set = current->blocked.sig[0];
+
+ if (nset) {
+ if (copy_from_user(&new_set, nset, sizeof(*nset)))
+ return -EFAULT;
new_set &= ~(sigmask(SIGKILL) | sigmask(SIGSTOP));
- spin_lock_irq(¤t->sighand->siglock);
- old_set = current->blocked.sig[0];
+ new_blocked = current->blocked;
- error = 0;
switch (how) {
- default:
- error = -EINVAL;
- break;
case SIG_BLOCK:
- sigaddsetmask(¤t->blocked, new_set);
+ sigaddsetmask(&new_blocked, new_set);
break;
case SIG_UNBLOCK:
- sigdelsetmask(¤t->blocked, new_set);
+ sigdelsetmask(&new_blocked, new_set);
break;
case SIG_SETMASK:
- current->blocked.sig[0] = new_set;
+ new_blocked.sig[0] = new_set;
break;
+ default:
+ return -EINVAL;
}
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- if (error)
- goto out;
- if (oset)
- goto set_old;
- } else if (oset) {
- old_set = current->blocked.sig[0];
- set_old:
- error = -EFAULT;
- if (copy_to_user(oset, &old_set, sizeof(*oset)))
- goto out;
+ set_current_blocked(&new_blocked);
}
- error = 0;
-out:
- return error;
+
+ if (oset) {
+ if (copy_to_user(oset, &old_set, sizeof(*oset)))
+ return -EFAULT;
+ }
+
+ return 0;
}
#endif /* __ARCH_WANT_SYS_SIGPROCMASK */
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 174f976..1396017 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -58,7 +58,7 @@
char *softirq_to_name[NR_SOFTIRQS] = {
"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL",
- "TASKLET", "SCHED", "HRTIMER", "RCU"
+ "TASKLET", "SCHED", "HRTIMER"
};
/*
diff --git a/kernel/sys.c b/kernel/sys.c
index af468ed..e4128b2 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -314,8 +314,8 @@
{
blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
system_state = SYSTEM_RESTART;
+ usermodehelper_disable();
device_shutdown();
- sysdev_shutdown();
syscore_shutdown();
}
@@ -344,6 +344,7 @@
blocking_notifier_call_chain(&reboot_notifier_list,
(state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
system_state = state;
+ usermodehelper_disable();
device_shutdown();
}
/**
@@ -354,7 +355,6 @@
void kernel_halt(void)
{
kernel_shutdown_prepare(SYSTEM_HALT);
- sysdev_shutdown();
syscore_shutdown();
printk(KERN_EMERG "System halted.\n");
kmsg_dump(KMSG_DUMP_HALT);
@@ -374,7 +374,6 @@
if (pm_power_off_prepare)
pm_power_off_prepare();
disable_nonboot_cpus();
- sysdev_shutdown();
syscore_shutdown();
printk(KERN_EMERG "Power down.\n");
kmsg_dump(KMSG_DUMP_POWEROFF);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 25cc41c..62cbc88 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -46,7 +46,9 @@
cond_syscall(compat_sys_getsockopt);
cond_syscall(sys_shutdown);
cond_syscall(sys_sendmsg);
+cond_syscall(sys_sendmmsg);
cond_syscall(compat_sys_sendmsg);
+cond_syscall(compat_sys_sendmmsg);
cond_syscall(sys_recvmsg);
cond_syscall(sys_recvmmsg);
cond_syscall(compat_sys_recvmsg);
@@ -69,15 +71,22 @@
cond_syscall(sys_semget);
cond_syscall(sys_semop);
cond_syscall(sys_semtimedop);
+cond_syscall(compat_sys_semtimedop);
cond_syscall(sys_semctl);
+cond_syscall(compat_sys_semctl);
cond_syscall(sys_msgget);
cond_syscall(sys_msgsnd);
+cond_syscall(compat_sys_msgsnd);
cond_syscall(sys_msgrcv);
+cond_syscall(compat_sys_msgrcv);
cond_syscall(sys_msgctl);
+cond_syscall(compat_sys_msgctl);
cond_syscall(sys_shmget);
cond_syscall(sys_shmat);
+cond_syscall(compat_sys_shmat);
cond_syscall(sys_shmdt);
cond_syscall(sys_shmctl);
+cond_syscall(compat_sys_shmctl);
cond_syscall(sys_mq_open);
cond_syscall(sys_mq_unlink);
cond_syscall(sys_mq_timedsend);
diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index b042599..e2fd74b 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -1,5 +1,5 @@
obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o
-obj-y += timeconv.o posix-clock.o
+obj-y += timeconv.o posix-clock.o alarmtimer.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD) += clockevents.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS) += tick-common.o
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
new file mode 100644
index 0000000..9265014
--- /dev/null
+++ b/kernel/time/alarmtimer.c
@@ -0,0 +1,694 @@
+/*
+ * Alarmtimer interface
+ *
+ * This interface provides a timer which is similarto hrtimers,
+ * but triggers a RTC alarm if the box is suspend.
+ *
+ * This interface is influenced by the Android RTC Alarm timer
+ * interface.
+ *
+ * Copyright (C) 2010 IBM Corperation
+ *
+ * Author: John Stultz <john.stultz@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/time.h>
+#include <linux/hrtimer.h>
+#include <linux/timerqueue.h>
+#include <linux/rtc.h>
+#include <linux/alarmtimer.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/posix-timers.h>
+#include <linux/workqueue.h>
+#include <linux/freezer.h>
+
+/**
+ * struct alarm_base - Alarm timer bases
+ * @lock: Lock for syncrhonized access to the base
+ * @timerqueue: Timerqueue head managing the list of events
+ * @timer: hrtimer used to schedule events while running
+ * @gettime: Function to read the time correlating to the base
+ * @base_clockid: clockid for the base
+ */
+static struct alarm_base {
+ spinlock_t lock;
+ struct timerqueue_head timerqueue;
+ struct hrtimer timer;
+ ktime_t (*gettime)(void);
+ clockid_t base_clockid;
+} alarm_bases[ALARM_NUMTYPE];
+
+#ifdef CONFIG_RTC_CLASS
+/* rtc timer and device for setting alarm wakeups at suspend */
+static struct rtc_timer rtctimer;
+static struct rtc_device *rtcdev;
+#endif
+
+/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */
+static ktime_t freezer_delta;
+static DEFINE_SPINLOCK(freezer_delta_lock);
+
+
+/**
+ * alarmtimer_enqueue - Adds an alarm timer to an alarm_base timerqueue
+ * @base: pointer to the base where the timer is being run
+ * @alarm: pointer to alarm being enqueued.
+ *
+ * Adds alarm to a alarm_base timerqueue and if necessary sets
+ * an hrtimer to run.
+ *
+ * Must hold base->lock when calling.
+ */
+static void alarmtimer_enqueue(struct alarm_base *base, struct alarm *alarm)
+{
+ timerqueue_add(&base->timerqueue, &alarm->node);
+ if (&alarm->node == timerqueue_getnext(&base->timerqueue)) {
+ hrtimer_try_to_cancel(&base->timer);
+ hrtimer_start(&base->timer, alarm->node.expires,
+ HRTIMER_MODE_ABS);
+ }
+}
+
+/**
+ * alarmtimer_remove - Removes an alarm timer from an alarm_base timerqueue
+ * @base: pointer to the base where the timer is running
+ * @alarm: pointer to alarm being removed
+ *
+ * Removes alarm to a alarm_base timerqueue and if necessary sets
+ * a new timer to run.
+ *
+ * Must hold base->lock when calling.
+ */
+static void alarmtimer_remove(struct alarm_base *base, struct alarm *alarm)
+{
+ struct timerqueue_node *next = timerqueue_getnext(&base->timerqueue);
+
+ timerqueue_del(&base->timerqueue, &alarm->node);
+ if (next == &alarm->node) {
+ hrtimer_try_to_cancel(&base->timer);
+ next = timerqueue_getnext(&base->timerqueue);
+ if (!next)
+ return;
+ hrtimer_start(&base->timer, next->expires, HRTIMER_MODE_ABS);
+ }
+}
+
+
+/**
+ * alarmtimer_fired - Handles alarm hrtimer being fired.
+ * @timer: pointer to hrtimer being run
+ *
+ * When a alarm timer fires, this runs through the timerqueue to
+ * see which alarms expired, and runs those. If there are more alarm
+ * timers queued for the future, we set the hrtimer to fire when
+ * when the next future alarm timer expires.
+ */
+static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer)
+{
+ struct alarm_base *base = container_of(timer, struct alarm_base, timer);
+ struct timerqueue_node *next;
+ unsigned long flags;
+ ktime_t now;
+ int ret = HRTIMER_NORESTART;
+
+ spin_lock_irqsave(&base->lock, flags);
+ now = base->gettime();
+ while ((next = timerqueue_getnext(&base->timerqueue))) {
+ struct alarm *alarm;
+ ktime_t expired = next->expires;
+
+ if (expired.tv64 >= now.tv64)
+ break;
+
+ alarm = container_of(next, struct alarm, node);
+
+ timerqueue_del(&base->timerqueue, &alarm->node);
+ alarm->enabled = 0;
+ /* Re-add periodic timers */
+ if (alarm->period.tv64) {
+ alarm->node.expires = ktime_add(expired, alarm->period);
+ timerqueue_add(&base->timerqueue, &alarm->node);
+ alarm->enabled = 1;
+ }
+ spin_unlock_irqrestore(&base->lock, flags);
+ if (alarm->function)
+ alarm->function(alarm);
+ spin_lock_irqsave(&base->lock, flags);
+ }
+
+ if (next) {
+ hrtimer_set_expires(&base->timer, next->expires);
+ ret = HRTIMER_RESTART;
+ }
+ spin_unlock_irqrestore(&base->lock, flags);
+
+ return ret;
+
+}
+
+#ifdef CONFIG_RTC_CLASS
+/**
+ * alarmtimer_suspend - Suspend time callback
+ * @dev: unused
+ * @state: unused
+ *
+ * When we are going into suspend, we look through the bases
+ * to see which is the soonest timer to expire. We then
+ * set an rtc timer to fire that far into the future, which
+ * will wake us from suspend.
+ */
+static int alarmtimer_suspend(struct device *dev)
+{
+ struct rtc_time tm;
+ ktime_t min, now;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&freezer_delta_lock, flags);
+ min = freezer_delta;
+ freezer_delta = ktime_set(0, 0);
+ spin_unlock_irqrestore(&freezer_delta_lock, flags);
+
+ /* If we have no rtcdev, just return */
+ if (!rtcdev)
+ return 0;
+
+ /* Find the soonest timer to expire*/
+ for (i = 0; i < ALARM_NUMTYPE; i++) {
+ struct alarm_base *base = &alarm_bases[i];
+ struct timerqueue_node *next;
+ ktime_t delta;
+
+ spin_lock_irqsave(&base->lock, flags);
+ next = timerqueue_getnext(&base->timerqueue);
+ spin_unlock_irqrestore(&base->lock, flags);
+ if (!next)
+ continue;
+ delta = ktime_sub(next->expires, base->gettime());
+ if (!min.tv64 || (delta.tv64 < min.tv64))
+ min = delta;
+ }
+ if (min.tv64 == 0)
+ return 0;
+
+ /* XXX - Should we enforce a minimum sleep time? */
+ WARN_ON(min.tv64 < NSEC_PER_SEC);
+
+ /* Setup an rtc timer to fire that far in the future */
+ rtc_timer_cancel(rtcdev, &rtctimer);
+ rtc_read_time(rtcdev, &tm);
+ now = rtc_tm_to_ktime(tm);
+ now = ktime_add(now, min);
+
+ rtc_timer_start(rtcdev, &rtctimer, now, ktime_set(0, 0));
+
+ return 0;
+}
+#else
+static int alarmtimer_suspend(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static void alarmtimer_freezerset(ktime_t absexp, enum alarmtimer_type type)
+{
+ ktime_t delta;
+ unsigned long flags;
+ struct alarm_base *base = &alarm_bases[type];
+
+ delta = ktime_sub(absexp, base->gettime());
+
+ spin_lock_irqsave(&freezer_delta_lock, flags);
+ if (!freezer_delta.tv64 || (delta.tv64 < freezer_delta.tv64))
+ freezer_delta = delta;
+ spin_unlock_irqrestore(&freezer_delta_lock, flags);
+}
+
+
+/**
+ * alarm_init - Initialize an alarm structure
+ * @alarm: ptr to alarm to be initialized
+ * @type: the type of the alarm
+ * @function: callback that is run when the alarm fires
+ */
+void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
+ void (*function)(struct alarm *))
+{
+ timerqueue_init(&alarm->node);
+ alarm->period = ktime_set(0, 0);
+ alarm->function = function;
+ alarm->type = type;
+ alarm->enabled = 0;
+}
+
+/**
+ * alarm_start - Sets an alarm to fire
+ * @alarm: ptr to alarm to set
+ * @start: time to run the alarm
+ * @period: period at which the alarm will recur
+ */
+void alarm_start(struct alarm *alarm, ktime_t start, ktime_t period)
+{
+ struct alarm_base *base = &alarm_bases[alarm->type];
+ unsigned long flags;
+
+ spin_lock_irqsave(&base->lock, flags);
+ if (alarm->enabled)
+ alarmtimer_remove(base, alarm);
+ alarm->node.expires = start;
+ alarm->period = period;
+ alarmtimer_enqueue(base, alarm);
+ alarm->enabled = 1;
+ spin_unlock_irqrestore(&base->lock, flags);
+}
+
+/**
+ * alarm_cancel - Tries to cancel an alarm timer
+ * @alarm: ptr to alarm to be canceled
+ */
+void alarm_cancel(struct alarm *alarm)
+{
+ struct alarm_base *base = &alarm_bases[alarm->type];
+ unsigned long flags;
+
+ spin_lock_irqsave(&base->lock, flags);
+ if (alarm->enabled)
+ alarmtimer_remove(base, alarm);
+ alarm->enabled = 0;
+ spin_unlock_irqrestore(&base->lock, flags);
+}
+
+
+/**
+ * clock2alarm - helper that converts from clockid to alarmtypes
+ * @clockid: clockid.
+ */
+static enum alarmtimer_type clock2alarm(clockid_t clockid)
+{
+ if (clockid == CLOCK_REALTIME_ALARM)
+ return ALARM_REALTIME;
+ if (clockid == CLOCK_BOOTTIME_ALARM)
+ return ALARM_BOOTTIME;
+ return -1;
+}
+
+/**
+ * alarm_handle_timer - Callback for posix timers
+ * @alarm: alarm that fired
+ *
+ * Posix timer callback for expired alarm timers.
+ */
+static void alarm_handle_timer(struct alarm *alarm)
+{
+ struct k_itimer *ptr = container_of(alarm, struct k_itimer,
+ it.alarmtimer);
+ if (posix_timer_event(ptr, 0) != 0)
+ ptr->it_overrun++;
+}
+
+/**
+ * alarm_clock_getres - posix getres interface
+ * @which_clock: clockid
+ * @tp: timespec to fill
+ *
+ * Returns the granularity of underlying alarm base clock
+ */
+static int alarm_clock_getres(const clockid_t which_clock, struct timespec *tp)
+{
+ clockid_t baseid = alarm_bases[clock2alarm(which_clock)].base_clockid;
+
+ return hrtimer_get_res(baseid, tp);
+}
+
+/**
+ * alarm_clock_get - posix clock_get interface
+ * @which_clock: clockid
+ * @tp: timespec to fill.
+ *
+ * Provides the underlying alarm base time.
+ */
+static int alarm_clock_get(clockid_t which_clock, struct timespec *tp)
+{
+ struct alarm_base *base = &alarm_bases[clock2alarm(which_clock)];
+
+ *tp = ktime_to_timespec(base->gettime());
+ return 0;
+}
+
+/**
+ * alarm_timer_create - posix timer_create interface
+ * @new_timer: k_itimer pointer to manage
+ *
+ * Initializes the k_itimer structure.
+ */
+static int alarm_timer_create(struct k_itimer *new_timer)
+{
+ enum alarmtimer_type type;
+ struct alarm_base *base;
+
+ if (!capable(CAP_WAKE_ALARM))
+ return -EPERM;
+
+ type = clock2alarm(new_timer->it_clock);
+ base = &alarm_bases[type];
+ alarm_init(&new_timer->it.alarmtimer, type, alarm_handle_timer);
+ return 0;
+}
+
+/**
+ * alarm_timer_get - posix timer_get interface
+ * @new_timer: k_itimer pointer
+ * @cur_setting: itimerspec data to fill
+ *
+ * Copies the itimerspec data out from the k_itimer
+ */
+static void alarm_timer_get(struct k_itimer *timr,
+ struct itimerspec *cur_setting)
+{
+ cur_setting->it_interval =
+ ktime_to_timespec(timr->it.alarmtimer.period);
+ cur_setting->it_value =
+ ktime_to_timespec(timr->it.alarmtimer.node.expires);
+ return;
+}
+
+/**
+ * alarm_timer_del - posix timer_del interface
+ * @timr: k_itimer pointer to be deleted
+ *
+ * Cancels any programmed alarms for the given timer.
+ */
+static int alarm_timer_del(struct k_itimer *timr)
+{
+ alarm_cancel(&timr->it.alarmtimer);
+ return 0;
+}
+
+/**
+ * alarm_timer_set - posix timer_set interface
+ * @timr: k_itimer pointer to be deleted
+ * @flags: timer flags
+ * @new_setting: itimerspec to be used
+ * @old_setting: itimerspec being replaced
+ *
+ * Sets the timer to new_setting, and starts the timer.
+ */
+static int alarm_timer_set(struct k_itimer *timr, int flags,
+ struct itimerspec *new_setting,
+ struct itimerspec *old_setting)
+{
+ /* Save old values */
+ old_setting->it_interval =
+ ktime_to_timespec(timr->it.alarmtimer.period);
+ old_setting->it_value =
+ ktime_to_timespec(timr->it.alarmtimer.node.expires);
+
+ /* If the timer was already set, cancel it */
+ alarm_cancel(&timr->it.alarmtimer);
+
+ /* start the timer */
+ alarm_start(&timr->it.alarmtimer,
+ timespec_to_ktime(new_setting->it_value),
+ timespec_to_ktime(new_setting->it_interval));
+ return 0;
+}
+
+/**
+ * alarmtimer_nsleep_wakeup - Wakeup function for alarm_timer_nsleep
+ * @alarm: ptr to alarm that fired
+ *
+ * Wakes up the task that set the alarmtimer
+ */
+static void alarmtimer_nsleep_wakeup(struct alarm *alarm)
+{
+ struct task_struct *task = (struct task_struct *)alarm->data;
+
+ alarm->data = NULL;
+ if (task)
+ wake_up_process(task);
+}
+
+/**
+ * alarmtimer_do_nsleep - Internal alarmtimer nsleep implementation
+ * @alarm: ptr to alarmtimer
+ * @absexp: absolute expiration time
+ *
+ * Sets the alarm timer and sleeps until it is fired or interrupted.
+ */
+static int alarmtimer_do_nsleep(struct alarm *alarm, ktime_t absexp)
+{
+ alarm->data = (void *)current;
+ do {
+ set_current_state(TASK_INTERRUPTIBLE);
+ alarm_start(alarm, absexp, ktime_set(0, 0));
+ if (likely(alarm->data))
+ schedule();
+
+ alarm_cancel(alarm);
+ } while (alarm->data && !signal_pending(current));
+
+ __set_current_state(TASK_RUNNING);
+
+ return (alarm->data == NULL);
+}
+
+
+/**
+ * update_rmtp - Update remaining timespec value
+ * @exp: expiration time
+ * @type: timer type
+ * @rmtp: user pointer to remaining timepsec value
+ *
+ * Helper function that fills in rmtp value with time between
+ * now and the exp value
+ */
+static int update_rmtp(ktime_t exp, enum alarmtimer_type type,
+ struct timespec __user *rmtp)
+{
+ struct timespec rmt;
+ ktime_t rem;
+
+ rem = ktime_sub(exp, alarm_bases[type].gettime());
+
+ if (rem.tv64 <= 0)
+ return 0;
+ rmt = ktime_to_timespec(rem);
+
+ if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
+ return -EFAULT;
+
+ return 1;
+
+}
+
+/**
+ * alarm_timer_nsleep_restart - restartblock alarmtimer nsleep
+ * @restart: ptr to restart block
+ *
+ * Handles restarted clock_nanosleep calls
+ */
+static long __sched alarm_timer_nsleep_restart(struct restart_block *restart)
+{
+ enum alarmtimer_type type = restart->nanosleep.index;
+ ktime_t exp;
+ struct timespec __user *rmtp;
+ struct alarm alarm;
+ int ret = 0;
+
+ exp.tv64 = restart->nanosleep.expires;
+ alarm_init(&alarm, type, alarmtimer_nsleep_wakeup);
+
+ if (alarmtimer_do_nsleep(&alarm, exp))
+ goto out;
+
+ if (freezing(current))
+ alarmtimer_freezerset(exp, type);
+
+ rmtp = restart->nanosleep.rmtp;
+ if (rmtp) {
+ ret = update_rmtp(exp, type, rmtp);
+ if (ret <= 0)
+ goto out;
+ }
+
+
+ /* The other values in restart are already filled in */
+ ret = -ERESTART_RESTARTBLOCK;
+out:
+ return ret;
+}
+
+/**
+ * alarm_timer_nsleep - alarmtimer nanosleep
+ * @which_clock: clockid
+ * @flags: determins abstime or relative
+ * @tsreq: requested sleep time (abs or rel)
+ * @rmtp: remaining sleep time saved
+ *
+ * Handles clock_nanosleep calls against _ALARM clockids
+ */
+static int alarm_timer_nsleep(const clockid_t which_clock, int flags,
+ struct timespec *tsreq, struct timespec __user *rmtp)
+{
+ enum alarmtimer_type type = clock2alarm(which_clock);
+ struct alarm alarm;
+ ktime_t exp;
+ int ret = 0;
+ struct restart_block *restart;
+
+ if (!capable(CAP_WAKE_ALARM))
+ return -EPERM;
+
+ alarm_init(&alarm, type, alarmtimer_nsleep_wakeup);
+
+ exp = timespec_to_ktime(*tsreq);
+ /* Convert (if necessary) to absolute time */
+ if (flags != TIMER_ABSTIME) {
+ ktime_t now = alarm_bases[type].gettime();
+ exp = ktime_add(now, exp);
+ }
+
+ if (alarmtimer_do_nsleep(&alarm, exp))
+ goto out;
+
+ if (freezing(current))
+ alarmtimer_freezerset(exp, type);
+
+ /* abs timers don't set remaining time or restart */
+ if (flags == TIMER_ABSTIME) {
+ ret = -ERESTARTNOHAND;
+ goto out;
+ }
+
+ if (rmtp) {
+ ret = update_rmtp(exp, type, rmtp);
+ if (ret <= 0)
+ goto out;
+ }
+
+ restart = ¤t_thread_info()->restart_block;
+ restart->fn = alarm_timer_nsleep_restart;
+ restart->nanosleep.index = type;
+ restart->nanosleep.expires = exp.tv64;
+ restart->nanosleep.rmtp = rmtp;
+ ret = -ERESTART_RESTARTBLOCK;
+
+out:
+ return ret;
+}
+
+
+/* Suspend hook structures */
+static const struct dev_pm_ops alarmtimer_pm_ops = {
+ .suspend = alarmtimer_suspend,
+};
+
+static struct platform_driver alarmtimer_driver = {
+ .driver = {
+ .name = "alarmtimer",
+ .pm = &alarmtimer_pm_ops,
+ }
+};
+
+/**
+ * alarmtimer_init - Initialize alarm timer code
+ *
+ * This function initializes the alarm bases and registers
+ * the posix clock ids.
+ */
+static int __init alarmtimer_init(void)
+{
+ int error = 0;
+ int i;
+ struct k_clock alarm_clock = {
+ .clock_getres = alarm_clock_getres,
+ .clock_get = alarm_clock_get,
+ .timer_create = alarm_timer_create,
+ .timer_set = alarm_timer_set,
+ .timer_del = alarm_timer_del,
+ .timer_get = alarm_timer_get,
+ .nsleep = alarm_timer_nsleep,
+ };
+
+ posix_timers_register_clock(CLOCK_REALTIME_ALARM, &alarm_clock);
+ posix_timers_register_clock(CLOCK_BOOTTIME_ALARM, &alarm_clock);
+
+ /* Initialize alarm bases */
+ alarm_bases[ALARM_REALTIME].base_clockid = CLOCK_REALTIME;
+ alarm_bases[ALARM_REALTIME].gettime = &ktime_get_real;
+ alarm_bases[ALARM_BOOTTIME].base_clockid = CLOCK_BOOTTIME;
+ alarm_bases[ALARM_BOOTTIME].gettime = &ktime_get_boottime;
+ for (i = 0; i < ALARM_NUMTYPE; i++) {
+ timerqueue_init_head(&alarm_bases[i].timerqueue);
+ spin_lock_init(&alarm_bases[i].lock);
+ hrtimer_init(&alarm_bases[i].timer,
+ alarm_bases[i].base_clockid,
+ HRTIMER_MODE_ABS);
+ alarm_bases[i].timer.function = alarmtimer_fired;
+ }
+ error = platform_driver_register(&alarmtimer_driver);
+ platform_device_register_simple("alarmtimer", -1, NULL, 0);
+
+ return error;
+}
+device_initcall(alarmtimer_init);
+
+#ifdef CONFIG_RTC_CLASS
+/**
+ * has_wakealarm - check rtc device has wakealarm ability
+ * @dev: current device
+ * @name_ptr: name to be returned
+ *
+ * This helper function checks to see if the rtc device can wake
+ * from suspend.
+ */
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ *(const char **)name_ptr = dev_name(dev);
+ return 1;
+}
+
+/**
+ * alarmtimer_init_late - Late initializing of alarmtimer code
+ *
+ * This function locates a rtc device to use for wakealarms.
+ * Run as late_initcall to make sure rtc devices have been
+ * registered.
+ */
+static int __init alarmtimer_init_late(void)
+{
+ char *str;
+
+ /* Find an rtc device and init the rtc_timer */
+ class_find_device(rtc_class, NULL, &str, has_wakealarm);
+ if (str)
+ rtcdev = rtc_class_open(str);
+ if (!rtcdev) {
+ printk(KERN_WARNING "No RTC device found, ALARM timers will"
+ " not wake from suspend");
+ }
+ rtc_timer_init(&rtctimer, NULL, NULL);
+
+ return 0;
+}
+#else
+static int __init alarmtimer_init_late(void)
+{
+ printk(KERN_WARNING "Kernel not built with RTC support, ALARM timers"
+ " will not wake from suspend");
+ return 0;
+}
+#endif
+late_initcall(alarmtimer_init_late);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 0d74b9b..c027d4f6 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -194,6 +194,70 @@
}
EXPORT_SYMBOL_GPL(clockevents_register_device);
+static void clockevents_config(struct clock_event_device *dev,
+ u32 freq)
+{
+ u64 sec;
+
+ if (!(dev->features & CLOCK_EVT_FEAT_ONESHOT))
+ return;
+
+ /*
+ * Calculate the maximum number of seconds we can sleep. Limit
+ * to 10 minutes for hardware which can program more than
+ * 32bit ticks so we still get reasonable conversion values.
+ */
+ sec = dev->max_delta_ticks;
+ do_div(sec, freq);
+ if (!sec)
+ sec = 1;
+ else if (sec > 600 && dev->max_delta_ticks > UINT_MAX)
+ sec = 600;
+
+ clockevents_calc_mult_shift(dev, freq, sec);
+ dev->min_delta_ns = clockevent_delta2ns(dev->min_delta_ticks, dev);
+ dev->max_delta_ns = clockevent_delta2ns(dev->max_delta_ticks, dev);
+}
+
+/**
+ * clockevents_config_and_register - Configure and register a clock event device
+ * @dev: device to register
+ * @freq: The clock frequency
+ * @min_delta: The minimum clock ticks to program in oneshot mode
+ * @max_delta: The maximum clock ticks to program in oneshot mode
+ *
+ * min/max_delta can be 0 for devices which do not support oneshot mode.
+ */
+void clockevents_config_and_register(struct clock_event_device *dev,
+ u32 freq, unsigned long min_delta,
+ unsigned long max_delta)
+{
+ dev->min_delta_ticks = min_delta;
+ dev->max_delta_ticks = max_delta;
+ clockevents_config(dev, freq);
+ clockevents_register_device(dev);
+}
+
+/**
+ * clockevents_update_freq - Update frequency and reprogram a clock event device.
+ * @dev: device to modify
+ * @freq: new device frequency
+ *
+ * Reconfigure and reprogram a clock event device in oneshot
+ * mode. Must be called on the cpu for which the device delivers per
+ * cpu timer events with interrupts disabled! Returns 0 on success,
+ * -ETIME when the event is in the past.
+ */
+int clockevents_update_freq(struct clock_event_device *dev, u32 freq)
+{
+ clockevents_config(dev, freq);
+
+ if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
+ return 0;
+
+ return clockevents_program_event(dev, dev->next_event, ktime_get());
+}
+
/*
* Noop handler when we shut down an event device
*/
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 6519cf62..1c95fd6 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -626,19 +626,6 @@
list_add(&cs->list, entry);
}
-
-/*
- * Maximum time we expect to go between ticks. This includes idle
- * tickless time. It provides the trade off between selecting a
- * mult/shift pair that is very precise but can only handle a short
- * period of time, vs. a mult/shift pair that can handle long periods
- * of time but isn't as precise.
- *
- * This is a subsystem constant, and actual hardware limitations
- * may override it (ie: clocksources that wrap every 3 seconds).
- */
-#define MAX_UPDATE_LENGTH 5 /* Seconds */
-
/**
* __clocksource_updatefreq_scale - Used update clocksource with new freq
* @t: clocksource to be registered
@@ -652,15 +639,28 @@
*/
void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
{
+ u64 sec;
+
/*
- * Ideally we want to use some of the limits used in
- * clocksource_max_deferment, to provide a more informed
- * MAX_UPDATE_LENGTH. But for now this just gets the
- * register interface working properly.
+ * Calc the maximum number of seconds which we can run before
+ * wrapping around. For clocksources which have a mask > 32bit
+ * we need to limit the max sleep time to have a good
+ * conversion precision. 10 minutes is still a reasonable
+ * amount. That results in a shift value of 24 for a
+ * clocksource with mask >= 40bit and f >= 4GHz. That maps to
+ * ~ 0.06ppm granularity for NTP. We apply the same 12.5%
+ * margin as we do in clocksource_max_deferment()
*/
+ sec = (cs->mask - (cs->mask >> 5));
+ do_div(sec, freq);
+ do_div(sec, scale);
+ if (!sec)
+ sec = 1;
+ else if (sec > 600 && cs->mask > UINT_MAX)
+ sec = 600;
+
clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
- NSEC_PER_SEC/scale,
- MAX_UPDATE_LENGTH*scale);
+ NSEC_PER_SEC / scale, sec * scale);
cs->max_idle_ns = clocksource_max_deferment(cs);
}
EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
@@ -685,8 +685,8 @@
/* Add clocksource to the clcoksource list */
mutex_lock(&clocksource_mutex);
clocksource_enqueue(cs);
- clocksource_select();
clocksource_enqueue_watchdog(cs);
+ clocksource_select();
mutex_unlock(&clocksource_mutex);
return 0;
}
@@ -706,8 +706,8 @@
mutex_lock(&clocksource_mutex);
clocksource_enqueue(cs);
- clocksource_select();
clocksource_enqueue_watchdog(cs);
+ clocksource_select();
mutex_unlock(&clocksource_mutex);
return 0;
}
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index da800ff..723c763 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -522,10 +522,11 @@
*/
void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
+ int cpu = smp_processor_id();
+
/* Set it up only once ! */
if (bc->event_handler != tick_handle_oneshot_broadcast) {
int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC;
- int cpu = smp_processor_id();
bc->event_handler = tick_handle_oneshot_broadcast;
clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
@@ -551,6 +552,15 @@
tick_broadcast_set_event(tick_next_period, 1);
} else
bc->next_event.tv64 = KTIME_MAX;
+ } else {
+ /*
+ * The first cpu which switches to oneshot mode sets
+ * the bit for all other cpus which are in the general
+ * (periodic) broadcast mask. So the bit is set and
+ * would prevent the first broadcast enter after this
+ * to program the bc device.
+ */
+ tick_broadcast_clear_oneshot(cpu);
}
}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8ad5d57..8e6a05a 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -596,6 +596,58 @@
static struct timespec timekeeping_suspend_time;
/**
+ * __timekeeping_inject_sleeptime - Internal function to add sleep interval
+ * @delta: pointer to a timespec delta value
+ *
+ * Takes a timespec offset measuring a suspend interval and properly
+ * adds the sleep offset to the timekeeping variables.
+ */
+static void __timekeeping_inject_sleeptime(struct timespec *delta)
+{
+ xtime = timespec_add(xtime, *delta);
+ wall_to_monotonic = timespec_sub(wall_to_monotonic, *delta);
+ total_sleep_time = timespec_add(total_sleep_time, *delta);
+}
+
+
+/**
+ * timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values
+ * @delta: pointer to a timespec delta value
+ *
+ * This hook is for architectures that cannot support read_persistent_clock
+ * because their RTC/persistent clock is only accessible when irqs are enabled.
+ *
+ * This function should only be called by rtc_resume(), and allows
+ * a suspend offset to be injected into the timekeeping values.
+ */
+void timekeeping_inject_sleeptime(struct timespec *delta)
+{
+ unsigned long flags;
+ struct timespec ts;
+
+ /* Make sure we don't set the clock twice */
+ read_persistent_clock(&ts);
+ if (!(ts.tv_sec == 0 && ts.tv_nsec == 0))
+ return;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+ timekeeping_forward_now();
+
+ __timekeeping_inject_sleeptime(delta);
+
+ timekeeper.ntp_error = 0;
+ ntp_clear();
+ update_vsyscall(&xtime, &wall_to_monotonic, timekeeper.clock,
+ timekeeper.mult);
+
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
+ /* signal hrtimers about time change */
+ clock_was_set();
+}
+
+
+/**
* timekeeping_resume - Resumes the generic timekeeping subsystem.
*
* This is for the generic clocksource timekeeping.
@@ -615,9 +667,7 @@
if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
ts = timespec_sub(ts, timekeeping_suspend_time);
- xtime = timespec_add(xtime, ts);
- wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
- total_sleep_time = timespec_add(total_sleep_time, ts);
+ __timekeeping_inject_sleeptime(&ts);
}
/* re-base the last cycle value */
timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index ee24fa1..d017c2c 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -39,20 +39,26 @@
#include "trace_stat.h"
#define FTRACE_WARN_ON(cond) \
- do { \
- if (WARN_ON(cond)) \
+ ({ \
+ int ___r = cond; \
+ if (WARN_ON(___r)) \
ftrace_kill(); \
- } while (0)
+ ___r; \
+ })
#define FTRACE_WARN_ON_ONCE(cond) \
- do { \
- if (WARN_ON_ONCE(cond)) \
+ ({ \
+ int ___r = cond; \
+ if (WARN_ON_ONCE(___r)) \
ftrace_kill(); \
- } while (0)
+ ___r; \
+ })
/* hash bits for specific function selection */
#define FTRACE_HASH_BITS 7
#define FTRACE_FUNC_HASHSIZE (1 << FTRACE_HASH_BITS)
+#define FTRACE_HASH_DEFAULT_BITS 10
+#define FTRACE_HASH_MAX_BITS 12
/* ftrace_enabled is a method to turn ftrace on or off */
int ftrace_enabled __read_mostly;
@@ -81,23 +87,29 @@
.func = ftrace_stub,
};
-static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end;
+static struct ftrace_ops *ftrace_global_list __read_mostly = &ftrace_list_end;
+static struct ftrace_ops *ftrace_ops_list __read_mostly = &ftrace_list_end;
ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub;
ftrace_func_t __ftrace_trace_function __read_mostly = ftrace_stub;
ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub;
+static struct ftrace_ops global_ops;
+
+static void
+ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip);
/*
- * Traverse the ftrace_list, invoking all entries. The reason that we
+ * Traverse the ftrace_global_list, invoking all entries. The reason that we
* can use rcu_dereference_raw() is that elements removed from this list
* are simply leaked, so there is no need to interact with a grace-period
* mechanism. The rcu_dereference_raw() calls are needed to handle
- * concurrent insertions into the ftrace_list.
+ * concurrent insertions into the ftrace_global_list.
*
* Silly Alpha and silly pointer-speculation compiler optimizations!
*/
-static void ftrace_list_func(unsigned long ip, unsigned long parent_ip)
+static void ftrace_global_list_func(unsigned long ip,
+ unsigned long parent_ip)
{
- struct ftrace_ops *op = rcu_dereference_raw(ftrace_list); /*see above*/
+ struct ftrace_ops *op = rcu_dereference_raw(ftrace_global_list); /*see above*/
while (op != &ftrace_list_end) {
op->func(ip, parent_ip);
@@ -147,46 +159,69 @@
}
#endif
-static int __register_ftrace_function(struct ftrace_ops *ops)
+static void update_global_ops(void)
{
- ops->next = ftrace_list;
+ ftrace_func_t func;
+
/*
- * We are entering ops into the ftrace_list but another
- * CPU might be walking that list. We need to make sure
- * the ops->next pointer is valid before another CPU sees
- * the ops pointer included into the ftrace_list.
+ * If there's only one function registered, then call that
+ * function directly. Otherwise, we need to iterate over the
+ * registered callers.
*/
- rcu_assign_pointer(ftrace_list, ops);
+ if (ftrace_global_list == &ftrace_list_end ||
+ ftrace_global_list->next == &ftrace_list_end)
+ func = ftrace_global_list->func;
+ else
+ func = ftrace_global_list_func;
- if (ftrace_enabled) {
- ftrace_func_t func;
-
- if (ops->next == &ftrace_list_end)
- func = ops->func;
- else
- func = ftrace_list_func;
-
- if (!list_empty(&ftrace_pids)) {
- set_ftrace_pid_function(func);
- func = ftrace_pid_func;
- }
-
- /*
- * For one func, simply call it directly.
- * For more than one func, call the chain.
- */
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
- ftrace_trace_function = func;
-#else
- __ftrace_trace_function = func;
- ftrace_trace_function = ftrace_test_stop_func;
-#endif
+ /* If we filter on pids, update to use the pid function */
+ if (!list_empty(&ftrace_pids)) {
+ set_ftrace_pid_function(func);
+ func = ftrace_pid_func;
}
- return 0;
+ global_ops.func = func;
}
-static int __unregister_ftrace_function(struct ftrace_ops *ops)
+static void update_ftrace_function(void)
+{
+ ftrace_func_t func;
+
+ update_global_ops();
+
+ /*
+ * If we are at the end of the list and this ops is
+ * not dynamic, then have the mcount trampoline call
+ * the function directly
+ */
+ if (ftrace_ops_list == &ftrace_list_end ||
+ (ftrace_ops_list->next == &ftrace_list_end &&
+ !(ftrace_ops_list->flags & FTRACE_OPS_FL_DYNAMIC)))
+ func = ftrace_ops_list->func;
+ else
+ func = ftrace_ops_list_func;
+
+#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ ftrace_trace_function = func;
+#else
+ __ftrace_trace_function = func;
+ ftrace_trace_function = ftrace_test_stop_func;
+#endif
+}
+
+static void add_ftrace_ops(struct ftrace_ops **list, struct ftrace_ops *ops)
+{
+ ops->next = *list;
+ /*
+ * We are entering ops into the list but another
+ * CPU might be walking that list. We need to make sure
+ * the ops->next pointer is valid before another CPU sees
+ * the ops pointer included into the list.
+ */
+ rcu_assign_pointer(*list, ops);
+}
+
+static int remove_ftrace_ops(struct ftrace_ops **list, struct ftrace_ops *ops)
{
struct ftrace_ops **p;
@@ -194,13 +229,12 @@
* If we are removing the last function, then simply point
* to the ftrace_stub.
*/
- if (ftrace_list == ops && ops->next == &ftrace_list_end) {
- ftrace_trace_function = ftrace_stub;
- ftrace_list = &ftrace_list_end;
+ if (*list == ops && ops->next == &ftrace_list_end) {
+ *list = &ftrace_list_end;
return 0;
}
- for (p = &ftrace_list; *p != &ftrace_list_end; p = &(*p)->next)
+ for (p = list; *p != &ftrace_list_end; p = &(*p)->next)
if (*p == ops)
break;
@@ -208,53 +242,83 @@
return -1;
*p = (*p)->next;
+ return 0;
+}
- if (ftrace_enabled) {
- /* If we only have one func left, then call that directly */
- if (ftrace_list->next == &ftrace_list_end) {
- ftrace_func_t func = ftrace_list->func;
+static int __register_ftrace_function(struct ftrace_ops *ops)
+{
+ if (ftrace_disabled)
+ return -ENODEV;
- if (!list_empty(&ftrace_pids)) {
- set_ftrace_pid_function(func);
- func = ftrace_pid_func;
- }
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
- ftrace_trace_function = func;
-#else
- __ftrace_trace_function = func;
-#endif
- }
- }
+ if (FTRACE_WARN_ON(ops == &global_ops))
+ return -EINVAL;
+
+ if (WARN_ON(ops->flags & FTRACE_OPS_FL_ENABLED))
+ return -EBUSY;
+
+ if (!core_kernel_data((unsigned long)ops))
+ ops->flags |= FTRACE_OPS_FL_DYNAMIC;
+
+ if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+ int first = ftrace_global_list == &ftrace_list_end;
+ add_ftrace_ops(&ftrace_global_list, ops);
+ ops->flags |= FTRACE_OPS_FL_ENABLED;
+ if (first)
+ add_ftrace_ops(&ftrace_ops_list, &global_ops);
+ } else
+ add_ftrace_ops(&ftrace_ops_list, ops);
+
+ if (ftrace_enabled)
+ update_ftrace_function();
+
+ return 0;
+}
+
+static int __unregister_ftrace_function(struct ftrace_ops *ops)
+{
+ int ret;
+
+ if (ftrace_disabled)
+ return -ENODEV;
+
+ if (WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED)))
+ return -EBUSY;
+
+ if (FTRACE_WARN_ON(ops == &global_ops))
+ return -EINVAL;
+
+ if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+ ret = remove_ftrace_ops(&ftrace_global_list, ops);
+ if (!ret && ftrace_global_list == &ftrace_list_end)
+ ret = remove_ftrace_ops(&ftrace_ops_list, &global_ops);
+ if (!ret)
+ ops->flags &= ~FTRACE_OPS_FL_ENABLED;
+ } else
+ ret = remove_ftrace_ops(&ftrace_ops_list, ops);
+
+ if (ret < 0)
+ return ret;
+
+ if (ftrace_enabled)
+ update_ftrace_function();
+
+ /*
+ * Dynamic ops may be freed, we must make sure that all
+ * callers are done before leaving this function.
+ */
+ if (ops->flags & FTRACE_OPS_FL_DYNAMIC)
+ synchronize_sched();
return 0;
}
static void ftrace_update_pid_func(void)
{
- ftrace_func_t func;
-
+ /* Only do something if we are tracing something */
if (ftrace_trace_function == ftrace_stub)
return;
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
- func = ftrace_trace_function;
-#else
- func = __ftrace_trace_function;
-#endif
-
- if (!list_empty(&ftrace_pids)) {
- set_ftrace_pid_function(func);
- func = ftrace_pid_func;
- } else {
- if (func == ftrace_pid_func)
- func = ftrace_pid_function;
- }
-
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
- ftrace_trace_function = func;
-#else
- __ftrace_trace_function = func;
-#endif
+ update_ftrace_function();
}
#ifdef CONFIG_FUNCTION_PROFILER
@@ -888,8 +952,35 @@
FTRACE_START_FUNC_RET = (1 << 3),
FTRACE_STOP_FUNC_RET = (1 << 4),
};
+struct ftrace_func_entry {
+ struct hlist_node hlist;
+ unsigned long ip;
+};
-static int ftrace_filtered;
+struct ftrace_hash {
+ unsigned long size_bits;
+ struct hlist_head *buckets;
+ unsigned long count;
+ struct rcu_head rcu;
+};
+
+/*
+ * We make these constant because no one should touch them,
+ * but they are used as the default "empty hash", to avoid allocating
+ * it all the time. These are in a read only section such that if
+ * anyone does try to modify it, it will cause an exception.
+ */
+static const struct hlist_head empty_buckets[1];
+static const struct ftrace_hash empty_hash = {
+ .buckets = (struct hlist_head *)empty_buckets,
+};
+#define EMPTY_HASH ((struct ftrace_hash *)&empty_hash)
+
+static struct ftrace_ops global_ops = {
+ .func = ftrace_stub,
+ .notrace_hash = EMPTY_HASH,
+ .filter_hash = EMPTY_HASH,
+};
static struct dyn_ftrace *ftrace_new_addrs;
@@ -912,6 +1003,269 @@
static struct dyn_ftrace *ftrace_free_records;
+static struct ftrace_func_entry *
+ftrace_lookup_ip(struct ftrace_hash *hash, unsigned long ip)
+{
+ unsigned long key;
+ struct ftrace_func_entry *entry;
+ struct hlist_head *hhd;
+ struct hlist_node *n;
+
+ if (!hash->count)
+ return NULL;
+
+ if (hash->size_bits > 0)
+ key = hash_long(ip, hash->size_bits);
+ else
+ key = 0;
+
+ hhd = &hash->buckets[key];
+
+ hlist_for_each_entry_rcu(entry, n, hhd, hlist) {
+ if (entry->ip == ip)
+ return entry;
+ }
+ return NULL;
+}
+
+static void __add_hash_entry(struct ftrace_hash *hash,
+ struct ftrace_func_entry *entry)
+{
+ struct hlist_head *hhd;
+ unsigned long key;
+
+ if (hash->size_bits)
+ key = hash_long(entry->ip, hash->size_bits);
+ else
+ key = 0;
+
+ hhd = &hash->buckets[key];
+ hlist_add_head(&entry->hlist, hhd);
+ hash->count++;
+}
+
+static int add_hash_entry(struct ftrace_hash *hash, unsigned long ip)
+{
+ struct ftrace_func_entry *entry;
+
+ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->ip = ip;
+ __add_hash_entry(hash, entry);
+
+ return 0;
+}
+
+static void
+free_hash_entry(struct ftrace_hash *hash,
+ struct ftrace_func_entry *entry)
+{
+ hlist_del(&entry->hlist);
+ kfree(entry);
+ hash->count--;
+}
+
+static void
+remove_hash_entry(struct ftrace_hash *hash,
+ struct ftrace_func_entry *entry)
+{
+ hlist_del(&entry->hlist);
+ hash->count--;
+}
+
+static void ftrace_hash_clear(struct ftrace_hash *hash)
+{
+ struct hlist_head *hhd;
+ struct hlist_node *tp, *tn;
+ struct ftrace_func_entry *entry;
+ int size = 1 << hash->size_bits;
+ int i;
+
+ if (!hash->count)
+ return;
+
+ for (i = 0; i < size; i++) {
+ hhd = &hash->buckets[i];
+ hlist_for_each_entry_safe(entry, tp, tn, hhd, hlist)
+ free_hash_entry(hash, entry);
+ }
+ FTRACE_WARN_ON(hash->count);
+}
+
+static void free_ftrace_hash(struct ftrace_hash *hash)
+{
+ if (!hash || hash == EMPTY_HASH)
+ return;
+ ftrace_hash_clear(hash);
+ kfree(hash->buckets);
+ kfree(hash);
+}
+
+static void __free_ftrace_hash_rcu(struct rcu_head *rcu)
+{
+ struct ftrace_hash *hash;
+
+ hash = container_of(rcu, struct ftrace_hash, rcu);
+ free_ftrace_hash(hash);
+}
+
+static void free_ftrace_hash_rcu(struct ftrace_hash *hash)
+{
+ if (!hash || hash == EMPTY_HASH)
+ return;
+ call_rcu_sched(&hash->rcu, __free_ftrace_hash_rcu);
+}
+
+static struct ftrace_hash *alloc_ftrace_hash(int size_bits)
+{
+ struct ftrace_hash *hash;
+ int size;
+
+ hash = kzalloc(sizeof(*hash), GFP_KERNEL);
+ if (!hash)
+ return NULL;
+
+ size = 1 << size_bits;
+ hash->buckets = kzalloc(sizeof(*hash->buckets) * size, GFP_KERNEL);
+
+ if (!hash->buckets) {
+ kfree(hash);
+ return NULL;
+ }
+
+ hash->size_bits = size_bits;
+
+ return hash;
+}
+
+static struct ftrace_hash *
+alloc_and_copy_ftrace_hash(int size_bits, struct ftrace_hash *hash)
+{
+ struct ftrace_func_entry *entry;
+ struct ftrace_hash *new_hash;
+ struct hlist_node *tp;
+ int size;
+ int ret;
+ int i;
+
+ new_hash = alloc_ftrace_hash(size_bits);
+ if (!new_hash)
+ return NULL;
+
+ /* Empty hash? */
+ if (!hash || !hash->count)
+ return new_hash;
+
+ size = 1 << hash->size_bits;
+ for (i = 0; i < size; i++) {
+ hlist_for_each_entry(entry, tp, &hash->buckets[i], hlist) {
+ ret = add_hash_entry(new_hash, entry->ip);
+ if (ret < 0)
+ goto free_hash;
+ }
+ }
+
+ FTRACE_WARN_ON(new_hash->count != hash->count);
+
+ return new_hash;
+
+ free_hash:
+ free_ftrace_hash(new_hash);
+ return NULL;
+}
+
+static int
+ftrace_hash_move(struct ftrace_hash **dst, struct ftrace_hash *src)
+{
+ struct ftrace_func_entry *entry;
+ struct hlist_node *tp, *tn;
+ struct hlist_head *hhd;
+ struct ftrace_hash *old_hash;
+ struct ftrace_hash *new_hash;
+ unsigned long key;
+ int size = src->count;
+ int bits = 0;
+ int i;
+
+ /*
+ * If the new source is empty, just free dst and assign it
+ * the empty_hash.
+ */
+ if (!src->count) {
+ free_ftrace_hash_rcu(*dst);
+ rcu_assign_pointer(*dst, EMPTY_HASH);
+ return 0;
+ }
+
+ /*
+ * Make the hash size about 1/2 the # found
+ */
+ for (size /= 2; size; size >>= 1)
+ bits++;
+
+ /* Don't allocate too much */
+ if (bits > FTRACE_HASH_MAX_BITS)
+ bits = FTRACE_HASH_MAX_BITS;
+
+ new_hash = alloc_ftrace_hash(bits);
+ if (!new_hash)
+ return -ENOMEM;
+
+ size = 1 << src->size_bits;
+ for (i = 0; i < size; i++) {
+ hhd = &src->buckets[i];
+ hlist_for_each_entry_safe(entry, tp, tn, hhd, hlist) {
+ if (bits > 0)
+ key = hash_long(entry->ip, bits);
+ else
+ key = 0;
+ remove_hash_entry(src, entry);
+ __add_hash_entry(new_hash, entry);
+ }
+ }
+
+ old_hash = *dst;
+ rcu_assign_pointer(*dst, new_hash);
+ free_ftrace_hash_rcu(old_hash);
+
+ return 0;
+}
+
+/*
+ * Test the hashes for this ops to see if we want to call
+ * the ops->func or not.
+ *
+ * It's a match if the ip is in the ops->filter_hash or
+ * the filter_hash does not exist or is empty,
+ * AND
+ * the ip is not in the ops->notrace_hash.
+ *
+ * This needs to be called with preemption disabled as
+ * the hashes are freed with call_rcu_sched().
+ */
+static int
+ftrace_ops_test(struct ftrace_ops *ops, unsigned long ip)
+{
+ struct ftrace_hash *filter_hash;
+ struct ftrace_hash *notrace_hash;
+ int ret;
+
+ filter_hash = rcu_dereference_raw(ops->filter_hash);
+ notrace_hash = rcu_dereference_raw(ops->notrace_hash);
+
+ if ((!filter_hash || !filter_hash->count ||
+ ftrace_lookup_ip(filter_hash, ip)) &&
+ (!notrace_hash || !notrace_hash->count ||
+ !ftrace_lookup_ip(notrace_hash, ip)))
+ ret = 1;
+ else
+ ret = 0;
+
+ return ret;
+}
+
/*
* This is a double for. Do not use 'break' to break out of the loop,
* you must use a goto.
@@ -926,6 +1280,105 @@
} \
}
+static void __ftrace_hash_rec_update(struct ftrace_ops *ops,
+ int filter_hash,
+ bool inc)
+{
+ struct ftrace_hash *hash;
+ struct ftrace_hash *other_hash;
+ struct ftrace_page *pg;
+ struct dyn_ftrace *rec;
+ int count = 0;
+ int all = 0;
+
+ /* Only update if the ops has been registered */
+ if (!(ops->flags & FTRACE_OPS_FL_ENABLED))
+ return;
+
+ /*
+ * In the filter_hash case:
+ * If the count is zero, we update all records.
+ * Otherwise we just update the items in the hash.
+ *
+ * In the notrace_hash case:
+ * We enable the update in the hash.
+ * As disabling notrace means enabling the tracing,
+ * and enabling notrace means disabling, the inc variable
+ * gets inversed.
+ */
+ if (filter_hash) {
+ hash = ops->filter_hash;
+ other_hash = ops->notrace_hash;
+ if (!hash || !hash->count)
+ all = 1;
+ } else {
+ inc = !inc;
+ hash = ops->notrace_hash;
+ other_hash = ops->filter_hash;
+ /*
+ * If the notrace hash has no items,
+ * then there's nothing to do.
+ */
+ if (hash && !hash->count)
+ return;
+ }
+
+ do_for_each_ftrace_rec(pg, rec) {
+ int in_other_hash = 0;
+ int in_hash = 0;
+ int match = 0;
+
+ if (all) {
+ /*
+ * Only the filter_hash affects all records.
+ * Update if the record is not in the notrace hash.
+ */
+ if (!other_hash || !ftrace_lookup_ip(other_hash, rec->ip))
+ match = 1;
+ } else {
+ in_hash = hash && !!ftrace_lookup_ip(hash, rec->ip);
+ in_other_hash = other_hash && !!ftrace_lookup_ip(other_hash, rec->ip);
+
+ /*
+ *
+ */
+ if (filter_hash && in_hash && !in_other_hash)
+ match = 1;
+ else if (!filter_hash && in_hash &&
+ (in_other_hash || !other_hash->count))
+ match = 1;
+ }
+ if (!match)
+ continue;
+
+ if (inc) {
+ rec->flags++;
+ if (FTRACE_WARN_ON((rec->flags & ~FTRACE_FL_MASK) == FTRACE_REF_MAX))
+ return;
+ } else {
+ if (FTRACE_WARN_ON((rec->flags & ~FTRACE_FL_MASK) == 0))
+ return;
+ rec->flags--;
+ }
+ count++;
+ /* Shortcut, if we handled all records, we are done. */
+ if (!all && count == hash->count)
+ return;
+ } while_for_each_ftrace_rec();
+}
+
+static void ftrace_hash_rec_disable(struct ftrace_ops *ops,
+ int filter_hash)
+{
+ __ftrace_hash_rec_update(ops, filter_hash, 0);
+}
+
+static void ftrace_hash_rec_enable(struct ftrace_ops *ops,
+ int filter_hash)
+{
+ __ftrace_hash_rec_update(ops, filter_hash, 1);
+}
+
static void ftrace_free_rec(struct dyn_ftrace *rec)
{
rec->freelist = ftrace_free_records;
@@ -1047,18 +1500,18 @@
ftrace_addr = (unsigned long)FTRACE_ADDR;
/*
- * If this record is not to be traced or we want to disable it,
- * then disable it.
+ * If we are enabling tracing:
*
- * If we want to enable it and filtering is off, then enable it.
+ * If the record has a ref count, then we need to enable it
+ * because someone is using it.
*
- * If we want to enable it and filtering is on, enable it only if
- * it's filtered
+ * Otherwise we make sure its disabled.
+ *
+ * If we are disabling tracing, then disable all records that
+ * are enabled.
*/
- if (enable && !(rec->flags & FTRACE_FL_NOTRACE)) {
- if (!ftrace_filtered || (rec->flags & FTRACE_FL_FILTER))
- flag = FTRACE_FL_ENABLED;
- }
+ if (enable && (rec->flags & ~FTRACE_FL_MASK))
+ flag = FTRACE_FL_ENABLED;
/* If the state of this record hasn't changed, then do nothing */
if ((rec->flags & FTRACE_FL_ENABLED) == flag)
@@ -1079,19 +1532,16 @@
struct ftrace_page *pg;
int failed;
+ if (unlikely(ftrace_disabled))
+ return;
+
do_for_each_ftrace_rec(pg, rec) {
- /*
- * Skip over free records, records that have
- * failed and not converted.
- */
- if (rec->flags & FTRACE_FL_FREE ||
- rec->flags & FTRACE_FL_FAILED ||
- !(rec->flags & FTRACE_FL_CONVERTED))
+ /* Skip over free records */
+ if (rec->flags & FTRACE_FL_FREE)
continue;
failed = __ftrace_replace_code(rec, enable);
if (failed) {
- rec->flags |= FTRACE_FL_FAILED;
ftrace_bug(failed, rec->ip);
/* Stop processing */
return;
@@ -1107,10 +1557,12 @@
ip = rec->ip;
+ if (unlikely(ftrace_disabled))
+ return 0;
+
ret = ftrace_make_nop(mod, rec, MCOUNT_ADDR);
if (ret) {
ftrace_bug(ret, ip);
- rec->flags |= FTRACE_FL_FAILED;
return 0;
}
return 1;
@@ -1171,6 +1623,7 @@
static ftrace_func_t saved_ftrace_func;
static int ftrace_start_up;
+static int global_start_up;
static void ftrace_startup_enable(int command)
{
@@ -1185,19 +1638,36 @@
ftrace_run_update_code(command);
}
-static void ftrace_startup(int command)
+static void ftrace_startup(struct ftrace_ops *ops, int command)
{
+ bool hash_enable = true;
+
if (unlikely(ftrace_disabled))
return;
ftrace_start_up++;
command |= FTRACE_ENABLE_CALLS;
+ /* ops marked global share the filter hashes */
+ if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+ ops = &global_ops;
+ /* Don't update hash if global is already set */
+ if (global_start_up)
+ hash_enable = false;
+ global_start_up++;
+ }
+
+ ops->flags |= FTRACE_OPS_FL_ENABLED;
+ if (hash_enable)
+ ftrace_hash_rec_enable(ops, 1);
+
ftrace_startup_enable(command);
}
-static void ftrace_shutdown(int command)
+static void ftrace_shutdown(struct ftrace_ops *ops, int command)
{
+ bool hash_disable = true;
+
if (unlikely(ftrace_disabled))
return;
@@ -1209,6 +1679,23 @@
*/
WARN_ON_ONCE(ftrace_start_up < 0);
+ if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+ ops = &global_ops;
+ global_start_up--;
+ WARN_ON_ONCE(global_start_up < 0);
+ /* Don't update hash if global still has users */
+ if (global_start_up) {
+ WARN_ON_ONCE(!ftrace_start_up);
+ hash_disable = false;
+ }
+ }
+
+ if (hash_disable)
+ ftrace_hash_rec_disable(ops, 1);
+
+ if (ops != &global_ops || !global_start_up)
+ ops->flags &= ~FTRACE_OPS_FL_ENABLED;
+
if (!ftrace_start_up)
command |= FTRACE_DISABLE_CALLS;
@@ -1273,10 +1760,10 @@
*/
if (!ftrace_code_disable(mod, p)) {
ftrace_free_rec(p);
- continue;
+ /* Game over */
+ break;
}
- p->flags |= FTRACE_FL_CONVERTED;
ftrace_update_cnt++;
/*
@@ -1351,9 +1838,9 @@
enum {
FTRACE_ITER_FILTER = (1 << 0),
FTRACE_ITER_NOTRACE = (1 << 1),
- FTRACE_ITER_FAILURES = (1 << 2),
- FTRACE_ITER_PRINTALL = (1 << 3),
- FTRACE_ITER_HASH = (1 << 4),
+ FTRACE_ITER_PRINTALL = (1 << 2),
+ FTRACE_ITER_HASH = (1 << 3),
+ FTRACE_ITER_ENABLED = (1 << 4),
};
#define FTRACE_BUFF_MAX (KSYM_SYMBOL_LEN+4) /* room for wildcards */
@@ -1365,6 +1852,8 @@
struct dyn_ftrace *func;
struct ftrace_func_probe *probe;
struct trace_parser parser;
+ struct ftrace_hash *hash;
+ struct ftrace_ops *ops;
int hidx;
int idx;
unsigned flags;
@@ -1461,8 +1950,12 @@
t_next(struct seq_file *m, void *v, loff_t *pos)
{
struct ftrace_iterator *iter = m->private;
+ struct ftrace_ops *ops = &global_ops;
struct dyn_ftrace *rec = NULL;
+ if (unlikely(ftrace_disabled))
+ return NULL;
+
if (iter->flags & FTRACE_ITER_HASH)
return t_hash_next(m, pos);
@@ -1483,17 +1976,15 @@
rec = &iter->pg->records[iter->idx++];
if ((rec->flags & FTRACE_FL_FREE) ||
- (!(iter->flags & FTRACE_ITER_FAILURES) &&
- (rec->flags & FTRACE_FL_FAILED)) ||
-
- ((iter->flags & FTRACE_ITER_FAILURES) &&
- !(rec->flags & FTRACE_FL_FAILED)) ||
-
((iter->flags & FTRACE_ITER_FILTER) &&
- !(rec->flags & FTRACE_FL_FILTER)) ||
+ !(ftrace_lookup_ip(ops->filter_hash, rec->ip))) ||
((iter->flags & FTRACE_ITER_NOTRACE) &&
- !(rec->flags & FTRACE_FL_NOTRACE))) {
+ !ftrace_lookup_ip(ops->notrace_hash, rec->ip)) ||
+
+ ((iter->flags & FTRACE_ITER_ENABLED) &&
+ !(rec->flags & ~FTRACE_FL_MASK))) {
+
rec = NULL;
goto retry;
}
@@ -1517,10 +2008,15 @@
static void *t_start(struct seq_file *m, loff_t *pos)
{
struct ftrace_iterator *iter = m->private;
+ struct ftrace_ops *ops = &global_ops;
void *p = NULL;
loff_t l;
mutex_lock(&ftrace_lock);
+
+ if (unlikely(ftrace_disabled))
+ return NULL;
+
/*
* If an lseek was done, then reset and start from beginning.
*/
@@ -1532,7 +2028,7 @@
* off, we can short cut and just print out that all
* functions are enabled.
*/
- if (iter->flags & FTRACE_ITER_FILTER && !ftrace_filtered) {
+ if (iter->flags & FTRACE_ITER_FILTER && !ops->filter_hash->count) {
if (*pos > 0)
return t_hash_start(m, pos);
iter->flags |= FTRACE_ITER_PRINTALL;
@@ -1590,7 +2086,11 @@
if (!rec)
return 0;
- seq_printf(m, "%ps\n", (void *)rec->ip);
+ seq_printf(m, "%ps", (void *)rec->ip);
+ if (iter->flags & FTRACE_ITER_ENABLED)
+ seq_printf(m, " (%ld)",
+ rec->flags & ~FTRACE_FL_MASK);
+ seq_printf(m, "\n");
return 0;
}
@@ -1630,44 +2130,46 @@
}
static int
-ftrace_failures_open(struct inode *inode, struct file *file)
+ftrace_enabled_open(struct inode *inode, struct file *file)
{
- int ret;
- struct seq_file *m;
struct ftrace_iterator *iter;
+ int ret;
- ret = ftrace_avail_open(inode, file);
+ if (unlikely(ftrace_disabled))
+ return -ENODEV;
+
+ iter = kzalloc(sizeof(*iter), GFP_KERNEL);
+ if (!iter)
+ return -ENOMEM;
+
+ iter->pg = ftrace_pages_start;
+ iter->flags = FTRACE_ITER_ENABLED;
+
+ ret = seq_open(file, &show_ftrace_seq_ops);
if (!ret) {
- m = file->private_data;
- iter = m->private;
- iter->flags = FTRACE_ITER_FAILURES;
+ struct seq_file *m = file->private_data;
+
+ m->private = iter;
+ } else {
+ kfree(iter);
}
return ret;
}
-
-static void ftrace_filter_reset(int enable)
+static void ftrace_filter_reset(struct ftrace_hash *hash)
{
- struct ftrace_page *pg;
- struct dyn_ftrace *rec;
- unsigned long type = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
-
mutex_lock(&ftrace_lock);
- if (enable)
- ftrace_filtered = 0;
- do_for_each_ftrace_rec(pg, rec) {
- if (rec->flags & FTRACE_FL_FAILED)
- continue;
- rec->flags &= ~type;
- } while_for_each_ftrace_rec();
+ ftrace_hash_clear(hash);
mutex_unlock(&ftrace_lock);
}
static int
-ftrace_regex_open(struct inode *inode, struct file *file, int enable)
+ftrace_regex_open(struct ftrace_ops *ops, int flag,
+ struct inode *inode, struct file *file)
{
struct ftrace_iterator *iter;
+ struct ftrace_hash *hash;
int ret = 0;
if (unlikely(ftrace_disabled))
@@ -1682,21 +2184,42 @@
return -ENOMEM;
}
+ if (flag & FTRACE_ITER_NOTRACE)
+ hash = ops->notrace_hash;
+ else
+ hash = ops->filter_hash;
+
+ iter->ops = ops;
+ iter->flags = flag;
+
+ if (file->f_mode & FMODE_WRITE) {
+ mutex_lock(&ftrace_lock);
+ iter->hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, hash);
+ mutex_unlock(&ftrace_lock);
+
+ if (!iter->hash) {
+ trace_parser_put(&iter->parser);
+ kfree(iter);
+ return -ENOMEM;
+ }
+ }
+
mutex_lock(&ftrace_regex_lock);
+
if ((file->f_mode & FMODE_WRITE) &&
(file->f_flags & O_TRUNC))
- ftrace_filter_reset(enable);
+ ftrace_filter_reset(iter->hash);
if (file->f_mode & FMODE_READ) {
iter->pg = ftrace_pages_start;
- iter->flags = enable ? FTRACE_ITER_FILTER :
- FTRACE_ITER_NOTRACE;
ret = seq_open(file, &show_ftrace_seq_ops);
if (!ret) {
struct seq_file *m = file->private_data;
m->private = iter;
} else {
+ /* Failed */
+ free_ftrace_hash(iter->hash);
trace_parser_put(&iter->parser);
kfree(iter);
}
@@ -1710,13 +2233,15 @@
static int
ftrace_filter_open(struct inode *inode, struct file *file)
{
- return ftrace_regex_open(inode, file, 1);
+ return ftrace_regex_open(&global_ops, FTRACE_ITER_FILTER,
+ inode, file);
}
static int
ftrace_notrace_open(struct inode *inode, struct file *file)
{
- return ftrace_regex_open(inode, file, 0);
+ return ftrace_regex_open(&global_ops, FTRACE_ITER_NOTRACE,
+ inode, file);
}
static loff_t
@@ -1761,86 +2286,99 @@
}
static int
-ftrace_match_record(struct dyn_ftrace *rec, char *regex, int len, int type)
+enter_record(struct ftrace_hash *hash, struct dyn_ftrace *rec, int not)
{
- char str[KSYM_SYMBOL_LEN];
+ struct ftrace_func_entry *entry;
+ int ret = 0;
- kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
- return ftrace_match(str, regex, len, type);
-}
+ entry = ftrace_lookup_ip(hash, rec->ip);
+ if (not) {
+ /* Do nothing if it doesn't exist */
+ if (!entry)
+ return 0;
-static int ftrace_match_records(char *buff, int len, int enable)
-{
- unsigned int search_len;
- struct ftrace_page *pg;
- struct dyn_ftrace *rec;
- unsigned long flag;
- char *search;
- int type;
- int not;
- int found = 0;
+ free_hash_entry(hash, entry);
+ } else {
+ /* Do nothing if it exists */
+ if (entry)
+ return 0;
- flag = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
- type = filter_parse_regex(buff, len, &search, ¬);
-
- search_len = strlen(search);
-
- mutex_lock(&ftrace_lock);
- do_for_each_ftrace_rec(pg, rec) {
-
- if (rec->flags & FTRACE_FL_FAILED)
- continue;
-
- if (ftrace_match_record(rec, search, search_len, type)) {
- if (not)
- rec->flags &= ~flag;
- else
- rec->flags |= flag;
- found = 1;
- }
- /*
- * Only enable filtering if we have a function that
- * is filtered on.
- */
- if (enable && (rec->flags & FTRACE_FL_FILTER))
- ftrace_filtered = 1;
- } while_for_each_ftrace_rec();
- mutex_unlock(&ftrace_lock);
-
- return found;
+ ret = add_hash_entry(hash, rec->ip);
+ }
+ return ret;
}
static int
-ftrace_match_module_record(struct dyn_ftrace *rec, char *mod,
- char *regex, int len, int type)
+ftrace_match_record(struct dyn_ftrace *rec, char *mod,
+ char *regex, int len, int type)
{
char str[KSYM_SYMBOL_LEN];
char *modname;
kallsyms_lookup(rec->ip, NULL, NULL, &modname, str);
- if (!modname || strcmp(modname, mod))
- return 0;
+ if (mod) {
+ /* module lookup requires matching the module */
+ if (!modname || strcmp(modname, mod))
+ return 0;
- /* blank search means to match all funcs in the mod */
- if (len)
- return ftrace_match(str, regex, len, type);
- else
- return 1;
+ /* blank search means to match all funcs in the mod */
+ if (!len)
+ return 1;
+ }
+
+ return ftrace_match(str, regex, len, type);
}
-static int ftrace_match_module_records(char *buff, char *mod, int enable)
+static int
+match_records(struct ftrace_hash *hash, char *buff,
+ int len, char *mod, int not)
{
unsigned search_len = 0;
struct ftrace_page *pg;
struct dyn_ftrace *rec;
int type = MATCH_FULL;
char *search = buff;
- unsigned long flag;
- int not = 0;
int found = 0;
+ int ret;
- flag = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
+ if (len) {
+ type = filter_parse_regex(buff, len, &search, ¬);
+ search_len = strlen(search);
+ }
+
+ mutex_lock(&ftrace_lock);
+
+ if (unlikely(ftrace_disabled))
+ goto out_unlock;
+
+ do_for_each_ftrace_rec(pg, rec) {
+
+ if (ftrace_match_record(rec, mod, search, search_len, type)) {
+ ret = enter_record(hash, rec, not);
+ if (ret < 0) {
+ found = ret;
+ goto out_unlock;
+ }
+ found = 1;
+ }
+ } while_for_each_ftrace_rec();
+ out_unlock:
+ mutex_unlock(&ftrace_lock);
+
+ return found;
+}
+
+static int
+ftrace_match_records(struct ftrace_hash *hash, char *buff, int len)
+{
+ return match_records(hash, buff, len, NULL, 0);
+}
+
+static int
+ftrace_match_module_records(struct ftrace_hash *hash, char *buff, char *mod)
+{
+ int not = 0;
/* blank or '*' mean the same */
if (strcmp(buff, "*") == 0)
@@ -1852,32 +2390,7 @@
not = 1;
}
- if (strlen(buff)) {
- type = filter_parse_regex(buff, strlen(buff), &search, ¬);
- search_len = strlen(search);
- }
-
- mutex_lock(&ftrace_lock);
- do_for_each_ftrace_rec(pg, rec) {
-
- if (rec->flags & FTRACE_FL_FAILED)
- continue;
-
- if (ftrace_match_module_record(rec, mod,
- search, search_len, type)) {
- if (not)
- rec->flags &= ~flag;
- else
- rec->flags |= flag;
- found = 1;
- }
- if (enable && (rec->flags & FTRACE_FL_FILTER))
- ftrace_filtered = 1;
-
- } while_for_each_ftrace_rec();
- mutex_unlock(&ftrace_lock);
-
- return found;
+ return match_records(hash, buff, strlen(buff), mod, not);
}
/*
@@ -1888,7 +2401,10 @@
static int
ftrace_mod_callback(char *func, char *cmd, char *param, int enable)
{
+ struct ftrace_ops *ops = &global_ops;
+ struct ftrace_hash *hash;
char *mod;
+ int ret = -EINVAL;
/*
* cmd == 'mod' because we only registered this func
@@ -1900,15 +2416,24 @@
/* we must have a module name */
if (!param)
- return -EINVAL;
+ return ret;
mod = strsep(¶m, ":");
if (!strlen(mod))
- return -EINVAL;
+ return ret;
- if (ftrace_match_module_records(func, mod, enable))
- return 0;
- return -EINVAL;
+ if (enable)
+ hash = ops->filter_hash;
+ else
+ hash = ops->notrace_hash;
+
+ ret = ftrace_match_module_records(hash, func, mod);
+ if (!ret)
+ ret = -EINVAL;
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static struct ftrace_func_command ftrace_mod_cmd = {
@@ -1959,6 +2484,7 @@
static void __enable_ftrace_function_probe(void)
{
+ int ret;
int i;
if (ftrace_probe_registered)
@@ -1973,13 +2499,16 @@
if (i == FTRACE_FUNC_HASHSIZE)
return;
- __register_ftrace_function(&trace_probe_ops);
- ftrace_startup(0);
+ ret = __register_ftrace_function(&trace_probe_ops);
+ if (!ret)
+ ftrace_startup(&trace_probe_ops, 0);
+
ftrace_probe_registered = 1;
}
static void __disable_ftrace_function_probe(void)
{
+ int ret;
int i;
if (!ftrace_probe_registered)
@@ -1992,8 +2521,10 @@
}
/* no more funcs left */
- __unregister_ftrace_function(&trace_probe_ops);
- ftrace_shutdown(0);
+ ret = __unregister_ftrace_function(&trace_probe_ops);
+ if (!ret)
+ ftrace_shutdown(&trace_probe_ops, 0);
+
ftrace_probe_registered = 0;
}
@@ -2029,12 +2560,13 @@
return -EINVAL;
mutex_lock(&ftrace_lock);
+
+ if (unlikely(ftrace_disabled))
+ goto out_unlock;
+
do_for_each_ftrace_rec(pg, rec) {
- if (rec->flags & FTRACE_FL_FAILED)
- continue;
-
- if (!ftrace_match_record(rec, search, len, type))
+ if (!ftrace_match_record(rec, NULL, search, len, type))
continue;
entry = kmalloc(sizeof(*entry), GFP_KERNEL);
@@ -2195,18 +2727,22 @@
return ret;
}
-static int ftrace_process_regex(char *buff, int len, int enable)
+static int ftrace_process_regex(struct ftrace_hash *hash,
+ char *buff, int len, int enable)
{
char *func, *command, *next = buff;
struct ftrace_func_command *p;
- int ret = -EINVAL;
+ int ret;
func = strsep(&next, ":");
if (!next) {
- if (ftrace_match_records(func, len, enable))
- return 0;
- return ret;
+ ret = ftrace_match_records(hash, func, len);
+ if (!ret)
+ ret = -EINVAL;
+ if (ret < 0)
+ return ret;
+ return 0;
}
/* command found */
@@ -2239,6 +2775,10 @@
mutex_lock(&ftrace_regex_lock);
+ ret = -ENODEV;
+ if (unlikely(ftrace_disabled))
+ goto out_unlock;
+
if (file->f_mode & FMODE_READ) {
struct seq_file *m = file->private_data;
iter = m->private;
@@ -2250,7 +2790,7 @@
if (read >= 0 && trace_parser_loaded(parser) &&
!trace_parser_cont(parser)) {
- ret = ftrace_process_regex(parser->buffer,
+ ret = ftrace_process_regex(iter->hash, parser->buffer,
parser->idx, enable);
trace_parser_clear(parser);
if (ret)
@@ -2278,22 +2818,49 @@
return ftrace_regex_write(file, ubuf, cnt, ppos, 0);
}
-static void
-ftrace_set_regex(unsigned char *buf, int len, int reset, int enable)
+static int
+ftrace_set_regex(struct ftrace_ops *ops, unsigned char *buf, int len,
+ int reset, int enable)
{
+ struct ftrace_hash **orig_hash;
+ struct ftrace_hash *hash;
+ int ret;
+
+ /* All global ops uses the global ops filters */
+ if (ops->flags & FTRACE_OPS_FL_GLOBAL)
+ ops = &global_ops;
+
if (unlikely(ftrace_disabled))
- return;
+ return -ENODEV;
+
+ if (enable)
+ orig_hash = &ops->filter_hash;
+ else
+ orig_hash = &ops->notrace_hash;
+
+ hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, *orig_hash);
+ if (!hash)
+ return -ENOMEM;
mutex_lock(&ftrace_regex_lock);
if (reset)
- ftrace_filter_reset(enable);
+ ftrace_filter_reset(hash);
if (buf)
- ftrace_match_records(buf, len, enable);
+ ftrace_match_records(hash, buf, len);
+
+ mutex_lock(&ftrace_lock);
+ ret = ftrace_hash_move(orig_hash, hash);
+ mutex_unlock(&ftrace_lock);
+
mutex_unlock(&ftrace_regex_lock);
+
+ free_ftrace_hash(hash);
+ return ret;
}
/**
* ftrace_set_filter - set a function to filter on in ftrace
+ * @ops - the ops to set the filter with
* @buf - the string that holds the function filter text.
* @len - the length of the string.
* @reset - non zero to reset all filters before applying this filter.
@@ -2301,13 +2868,16 @@
* Filters denote which functions should be enabled when tracing is enabled.
* If @buf is NULL and reset is set, all functions will be enabled for tracing.
*/
-void ftrace_set_filter(unsigned char *buf, int len, int reset)
+void ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
+ int len, int reset)
{
- ftrace_set_regex(buf, len, reset, 1);
+ ftrace_set_regex(ops, buf, len, reset, 1);
}
+EXPORT_SYMBOL_GPL(ftrace_set_filter);
/**
* ftrace_set_notrace - set a function to not trace in ftrace
+ * @ops - the ops to set the notrace filter with
* @buf - the string that holds the function notrace text.
* @len - the length of the string.
* @reset - non zero to reset all filters before applying this filter.
@@ -2316,10 +2886,44 @@
* is enabled. If @buf is NULL and reset is set, all functions will be enabled
* for tracing.
*/
-void ftrace_set_notrace(unsigned char *buf, int len, int reset)
+void ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
+ int len, int reset)
{
- ftrace_set_regex(buf, len, reset, 0);
+ ftrace_set_regex(ops, buf, len, reset, 0);
}
+EXPORT_SYMBOL_GPL(ftrace_set_notrace);
+/**
+ * ftrace_set_filter - set a function to filter on in ftrace
+ * @ops - the ops to set the filter with
+ * @buf - the string that holds the function filter text.
+ * @len - the length of the string.
+ * @reset - non zero to reset all filters before applying this filter.
+ *
+ * Filters denote which functions should be enabled when tracing is enabled.
+ * If @buf is NULL and reset is set, all functions will be enabled for tracing.
+ */
+void ftrace_set_global_filter(unsigned char *buf, int len, int reset)
+{
+ ftrace_set_regex(&global_ops, buf, len, reset, 1);
+}
+EXPORT_SYMBOL_GPL(ftrace_set_global_filter);
+
+/**
+ * ftrace_set_notrace - set a function to not trace in ftrace
+ * @ops - the ops to set the notrace filter with
+ * @buf - the string that holds the function notrace text.
+ * @len - the length of the string.
+ * @reset - non zero to reset all filters before applying this filter.
+ *
+ * Notrace Filters denote which functions should not be enabled when tracing
+ * is enabled. If @buf is NULL and reset is set, all functions will be enabled
+ * for tracing.
+ */
+void ftrace_set_global_notrace(unsigned char *buf, int len, int reset)
+{
+ ftrace_set_regex(&global_ops, buf, len, reset, 0);
+}
+EXPORT_SYMBOL_GPL(ftrace_set_global_notrace);
/*
* command line interface to allow users to set filters on boot up.
@@ -2370,22 +2974,23 @@
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-static void __init set_ftrace_early_filter(char *buf, int enable)
+static void __init
+set_ftrace_early_filter(struct ftrace_ops *ops, char *buf, int enable)
{
char *func;
while (buf) {
func = strsep(&buf, ",");
- ftrace_set_regex(func, strlen(func), 0, enable);
+ ftrace_set_regex(ops, func, strlen(func), 0, enable);
}
}
static void __init set_ftrace_early_filters(void)
{
if (ftrace_filter_buf[0])
- set_ftrace_early_filter(ftrace_filter_buf, 1);
+ set_ftrace_early_filter(&global_ops, ftrace_filter_buf, 1);
if (ftrace_notrace_buf[0])
- set_ftrace_early_filter(ftrace_notrace_buf, 0);
+ set_ftrace_early_filter(&global_ops, ftrace_notrace_buf, 0);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
if (ftrace_graph_buf[0])
set_ftrace_early_graph(ftrace_graph_buf);
@@ -2393,11 +2998,14 @@
}
static int
-ftrace_regex_release(struct inode *inode, struct file *file, int enable)
+ftrace_regex_release(struct inode *inode, struct file *file)
{
struct seq_file *m = (struct seq_file *)file->private_data;
struct ftrace_iterator *iter;
+ struct ftrace_hash **orig_hash;
struct trace_parser *parser;
+ int filter_hash;
+ int ret;
mutex_lock(&ftrace_regex_lock);
if (file->f_mode & FMODE_READ) {
@@ -2410,33 +3018,41 @@
parser = &iter->parser;
if (trace_parser_loaded(parser)) {
parser->buffer[parser->idx] = 0;
- ftrace_match_records(parser->buffer, parser->idx, enable);
+ ftrace_match_records(iter->hash, parser->buffer, parser->idx);
}
- mutex_lock(&ftrace_lock);
- if (ftrace_start_up && ftrace_enabled)
- ftrace_run_update_code(FTRACE_ENABLE_CALLS);
- mutex_unlock(&ftrace_lock);
-
trace_parser_put(parser);
+
+ if (file->f_mode & FMODE_WRITE) {
+ filter_hash = !!(iter->flags & FTRACE_ITER_FILTER);
+
+ if (filter_hash)
+ orig_hash = &iter->ops->filter_hash;
+ else
+ orig_hash = &iter->ops->notrace_hash;
+
+ mutex_lock(&ftrace_lock);
+ /*
+ * Remove the current set, update the hash and add
+ * them back.
+ */
+ ftrace_hash_rec_disable(iter->ops, filter_hash);
+ ret = ftrace_hash_move(orig_hash, iter->hash);
+ if (!ret) {
+ ftrace_hash_rec_enable(iter->ops, filter_hash);
+ if (iter->ops->flags & FTRACE_OPS_FL_ENABLED
+ && ftrace_enabled)
+ ftrace_run_update_code(FTRACE_ENABLE_CALLS);
+ }
+ mutex_unlock(&ftrace_lock);
+ }
+ free_ftrace_hash(iter->hash);
kfree(iter);
mutex_unlock(&ftrace_regex_lock);
return 0;
}
-static int
-ftrace_filter_release(struct inode *inode, struct file *file)
-{
- return ftrace_regex_release(inode, file, 1);
-}
-
-static int
-ftrace_notrace_release(struct inode *inode, struct file *file)
-{
- return ftrace_regex_release(inode, file, 0);
-}
-
static const struct file_operations ftrace_avail_fops = {
.open = ftrace_avail_open,
.read = seq_read,
@@ -2444,8 +3060,8 @@
.release = seq_release_private,
};
-static const struct file_operations ftrace_failures_fops = {
- .open = ftrace_failures_open,
+static const struct file_operations ftrace_enabled_fops = {
+ .open = ftrace_enabled_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_private,
@@ -2456,7 +3072,7 @@
.read = seq_read,
.write = ftrace_filter_write,
.llseek = ftrace_regex_lseek,
- .release = ftrace_filter_release,
+ .release = ftrace_regex_release,
};
static const struct file_operations ftrace_notrace_fops = {
@@ -2464,7 +3080,7 @@
.read = seq_read,
.write = ftrace_notrace_write,
.llseek = ftrace_regex_lseek,
- .release = ftrace_notrace_release,
+ .release = ftrace_regex_release,
};
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -2573,9 +3189,6 @@
bool exists;
int i;
- if (ftrace_disabled)
- return -ENODEV;
-
/* decode regex */
type = filter_parse_regex(buffer, strlen(buffer), &search, ¬);
if (!not && *idx >= FTRACE_GRAPH_MAX_FUNCS)
@@ -2584,12 +3197,18 @@
search_len = strlen(search);
mutex_lock(&ftrace_lock);
+
+ if (unlikely(ftrace_disabled)) {
+ mutex_unlock(&ftrace_lock);
+ return -ENODEV;
+ }
+
do_for_each_ftrace_rec(pg, rec) {
- if (rec->flags & (FTRACE_FL_FAILED | FTRACE_FL_FREE))
+ if (rec->flags & FTRACE_FL_FREE)
continue;
- if (ftrace_match_record(rec, search, search_len, type)) {
+ if (ftrace_match_record(rec, NULL, search, search_len, type)) {
/* if it is in the array */
exists = false;
for (i = 0; i < *idx; i++) {
@@ -2679,8 +3298,8 @@
trace_create_file("available_filter_functions", 0444,
d_tracer, NULL, &ftrace_avail_fops);
- trace_create_file("failures", 0444,
- d_tracer, NULL, &ftrace_failures_fops);
+ trace_create_file("enabled_functions", 0444,
+ d_tracer, NULL, &ftrace_enabled_fops);
trace_create_file("set_ftrace_filter", 0644, d_tracer,
NULL, &ftrace_filter_fops);
@@ -2703,7 +3322,6 @@
{
unsigned long *p;
unsigned long addr;
- unsigned long flags;
mutex_lock(&ftrace_lock);
p = start;
@@ -2720,10 +3338,7 @@
ftrace_record_ip(addr);
}
- /* disable interrupts to prevent kstop machine */
- local_irq_save(flags);
ftrace_update_code(mod);
- local_irq_restore(flags);
mutex_unlock(&ftrace_lock);
return 0;
@@ -2735,10 +3350,11 @@
struct dyn_ftrace *rec;
struct ftrace_page *pg;
- if (ftrace_disabled)
- return;
-
mutex_lock(&ftrace_lock);
+
+ if (ftrace_disabled)
+ goto out_unlock;
+
do_for_each_ftrace_rec(pg, rec) {
if (within_module_core(rec->ip, mod)) {
/*
@@ -2749,6 +3365,7 @@
ftrace_free_rec(rec);
}
} while_for_each_ftrace_rec();
+ out_unlock:
mutex_unlock(&ftrace_lock);
}
@@ -2835,6 +3452,10 @@
#else
+static struct ftrace_ops global_ops = {
+ .func = ftrace_stub,
+};
+
static int __init ftrace_nodyn_init(void)
{
ftrace_enabled = 1;
@@ -2845,12 +3466,38 @@
static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; }
static inline void ftrace_startup_enable(int command) { }
/* Keep as macros so we do not need to define the commands */
-# define ftrace_startup(command) do { } while (0)
-# define ftrace_shutdown(command) do { } while (0)
+# define ftrace_startup(ops, command) do { } while (0)
+# define ftrace_shutdown(ops, command) do { } while (0)
# define ftrace_startup_sysctl() do { } while (0)
# define ftrace_shutdown_sysctl() do { } while (0)
+
+static inline int
+ftrace_ops_test(struct ftrace_ops *ops, unsigned long ip)
+{
+ return 1;
+}
+
#endif /* CONFIG_DYNAMIC_FTRACE */
+static void
+ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip)
+{
+ struct ftrace_ops *op;
+
+ /*
+ * Some of the ops may be dynamically allocated,
+ * they must be freed after a synchronize_sched().
+ */
+ preempt_disable_notrace();
+ op = rcu_dereference_raw(ftrace_ops_list);
+ while (op != &ftrace_list_end) {
+ if (ftrace_ops_test(op, ip))
+ op->func(ip, parent_ip);
+ op = rcu_dereference_raw(op->next);
+ };
+ preempt_enable_notrace();
+}
+
static void clear_ftrace_swapper(void)
{
struct task_struct *p;
@@ -3143,19 +3790,23 @@
*/
int register_ftrace_function(struct ftrace_ops *ops)
{
- int ret;
-
- if (unlikely(ftrace_disabled))
- return -1;
+ int ret = -1;
mutex_lock(&ftrace_lock);
- ret = __register_ftrace_function(ops);
- ftrace_startup(0);
+ if (unlikely(ftrace_disabled))
+ goto out_unlock;
+ ret = __register_ftrace_function(ops);
+ if (!ret)
+ ftrace_startup(ops, 0);
+
+
+ out_unlock:
mutex_unlock(&ftrace_lock);
return ret;
}
+EXPORT_SYMBOL_GPL(register_ftrace_function);
/**
* unregister_ftrace_function - unregister a function for profiling.
@@ -3169,25 +3820,27 @@
mutex_lock(&ftrace_lock);
ret = __unregister_ftrace_function(ops);
- ftrace_shutdown(0);
+ if (!ret)
+ ftrace_shutdown(ops, 0);
mutex_unlock(&ftrace_lock);
return ret;
}
+EXPORT_SYMBOL_GPL(unregister_ftrace_function);
int
ftrace_enable_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
- int ret;
-
- if (unlikely(ftrace_disabled))
- return -ENODEV;
+ int ret = -ENODEV;
mutex_lock(&ftrace_lock);
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (unlikely(ftrace_disabled))
+ goto out;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
goto out;
@@ -3199,11 +3852,11 @@
ftrace_startup_sysctl();
/* we are starting ftrace again */
- if (ftrace_list != &ftrace_list_end) {
- if (ftrace_list->next == &ftrace_list_end)
- ftrace_trace_function = ftrace_list->func;
+ if (ftrace_ops_list != &ftrace_list_end) {
+ if (ftrace_ops_list->next == &ftrace_list_end)
+ ftrace_trace_function = ftrace_ops_list->func;
else
- ftrace_trace_function = ftrace_list_func;
+ ftrace_trace_function = ftrace_ops_list_func;
}
} else {
@@ -3392,7 +4045,7 @@
ftrace_graph_return = retfunc;
ftrace_graph_entry = entryfunc;
- ftrace_startup(FTRACE_START_FUNC_RET);
+ ftrace_startup(&global_ops, FTRACE_START_FUNC_RET);
out:
mutex_unlock(&ftrace_lock);
@@ -3409,7 +4062,7 @@
ftrace_graph_active--;
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
- ftrace_shutdown(FTRACE_STOP_FUNC_RET);
+ ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index d38c16a..ee9c921 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1110,6 +1110,7 @@
entry->preempt_count = pc & 0xff;
entry->pid = (tsk) ? tsk->pid : 0;
+ entry->padding = 0;
entry->flags =
#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
(irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) |
@@ -2013,9 +2014,10 @@
{
enum print_line_t ret;
- if (iter->lost_events)
- trace_seq_printf(&iter->seq, "CPU:%d [LOST %lu EVENTS]\n",
- iter->cpu, iter->lost_events);
+ if (iter->lost_events &&
+ !trace_seq_printf(&iter->seq, "CPU:%d [LOST %lu EVENTS]\n",
+ iter->cpu, iter->lost_events))
+ return TRACE_TYPE_PARTIAL_LINE;
if (iter->trace && iter->trace->print_line) {
ret = iter->trace->print_line(iter);
@@ -3229,6 +3231,14 @@
if (iter->seq.len >= cnt)
break;
+
+ /*
+ * Setting the full flag means we reached the trace_seq buffer
+ * size and we should leave by partial output condition above.
+ * One of the trace_seq_* functions is not used properly.
+ */
+ WARN_ONCE(iter->seq.full, "full flag set for trace type %d",
+ iter->ent->type);
}
trace_access_unlock(iter->cpu_file);
trace_event_read_unlock();
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 5e9dfc6..6b69c4b 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -419,6 +419,8 @@
extern unsigned long ftrace_update_tot_cnt;
#define DYN_FTRACE_TEST_NAME trace_selftest_dynamic_test_func
extern int DYN_FTRACE_TEST_NAME(void);
+#define DYN_FTRACE_TEST_NAME2 trace_selftest_dynamic_test_func2
+extern int DYN_FTRACE_TEST_NAME2(void);
#endif
extern int ring_buffer_expanded;
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index e88f74f..2fe1103 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -116,6 +116,7 @@
__common_field(unsigned char, flags);
__common_field(unsigned char, preempt_count);
__common_field(int, pid);
+ __common_field(int, padding);
return ret;
}
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 16aee4d..8d0e1cc 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -149,11 +149,13 @@
static struct ftrace_ops trace_ops __read_mostly =
{
.func = function_trace_call,
+ .flags = FTRACE_OPS_FL_GLOBAL,
};
static struct ftrace_ops trace_stack_ops __read_mostly =
{
.func = function_stack_trace_call,
+ .flags = FTRACE_OPS_FL_GLOBAL,
};
/* Our two options */
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index a4969b4..c77424b 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -153,6 +153,7 @@
static struct ftrace_ops trace_ops __read_mostly =
{
.func = irqsoff_tracer_call,
+ .flags = FTRACE_OPS_FL_GLOBAL,
};
#endif /* CONFIG_FUNCTION_TRACER */
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 35d55a3..f925c45 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -53,7 +53,6 @@
"common_preempt_count",
"common_pid",
"common_tgid",
- "common_lock_depth",
FIELD_STRING_IP,
FIELD_STRING_RETIP,
FIELD_STRING_FUNC,
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 456be90..cf535cc 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -830,6 +830,9 @@
enum print_line_t trace_nop_print(struct trace_iterator *iter, int flags,
struct trace_event *event)
{
+ if (!trace_seq_printf(&iter->seq, "type: %d\n", iter->ent->type))
+ return TRACE_TYPE_PARTIAL_LINE;
+
return TRACE_TYPE_HANDLED;
}
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index 2547d88..dff763b 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -32,7 +32,7 @@
struct trace_bprintk_fmt {
struct list_head list;
- char fmt[0];
+ const char *fmt;
};
static inline struct trace_bprintk_fmt *lookup_format(const char *fmt)
@@ -49,6 +49,7 @@
void hold_module_trace_bprintk_format(const char **start, const char **end)
{
const char **iter;
+ char *fmt;
mutex_lock(&btrace_mutex);
for (iter = start; iter < end; iter++) {
@@ -58,14 +59,18 @@
continue;
}
- tb_fmt = kmalloc(offsetof(struct trace_bprintk_fmt, fmt)
- + strlen(*iter) + 1, GFP_KERNEL);
- if (tb_fmt) {
+ tb_fmt = kmalloc(sizeof(*tb_fmt), GFP_KERNEL);
+ if (tb_fmt)
+ fmt = kmalloc(strlen(*iter) + 1, GFP_KERNEL);
+ if (tb_fmt && fmt) {
list_add_tail(&tb_fmt->list, &trace_bprintk_fmt_list);
- strcpy(tb_fmt->fmt, *iter);
+ strcpy(fmt, *iter);
+ tb_fmt->fmt = fmt;
*iter = tb_fmt->fmt;
- } else
+ } else {
+ kfree(tb_fmt);
*iter = NULL;
+ }
}
mutex_unlock(&btrace_mutex);
}
@@ -84,6 +89,76 @@
return 0;
}
+/*
+ * The debugfs/tracing/printk_formats file maps the addresses with
+ * the ASCII formats that are used in the bprintk events in the
+ * buffer. For userspace tools to be able to decode the events from
+ * the buffer, they need to be able to map the address with the format.
+ *
+ * The addresses of the bprintk formats are in their own section
+ * __trace_printk_fmt. But for modules we copy them into a link list.
+ * The code to print the formats and their addresses passes around the
+ * address of the fmt string. If the fmt address passed into the seq
+ * functions is within the kernel core __trace_printk_fmt section, then
+ * it simply uses the next pointer in the list.
+ *
+ * When the fmt pointer is outside the kernel core __trace_printk_fmt
+ * section, then we need to read the link list pointers. The trick is
+ * we pass the address of the string to the seq function just like
+ * we do for the kernel core formats. To get back the structure that
+ * holds the format, we simply use containerof() and then go to the
+ * next format in the list.
+ */
+static const char **
+find_next_mod_format(int start_index, void *v, const char **fmt, loff_t *pos)
+{
+ struct trace_bprintk_fmt *mod_fmt;
+
+ if (list_empty(&trace_bprintk_fmt_list))
+ return NULL;
+
+ /*
+ * v will point to the address of the fmt record from t_next
+ * v will be NULL from t_start.
+ * If this is the first pointer or called from start
+ * then we need to walk the list.
+ */
+ if (!v || start_index == *pos) {
+ struct trace_bprintk_fmt *p;
+
+ /* search the module list */
+ list_for_each_entry(p, &trace_bprintk_fmt_list, list) {
+ if (start_index == *pos)
+ return &p->fmt;
+ start_index++;
+ }
+ /* pos > index */
+ return NULL;
+ }
+
+ /*
+ * v points to the address of the fmt field in the mod list
+ * structure that holds the module print format.
+ */
+ mod_fmt = container_of(v, typeof(*mod_fmt), fmt);
+ if (mod_fmt->list.next == &trace_bprintk_fmt_list)
+ return NULL;
+
+ mod_fmt = container_of(mod_fmt->list.next, typeof(*mod_fmt), list);
+
+ return &mod_fmt->fmt;
+}
+
+static void format_mod_start(void)
+{
+ mutex_lock(&btrace_mutex);
+}
+
+static void format_mod_stop(void)
+{
+ mutex_unlock(&btrace_mutex);
+}
+
#else /* !CONFIG_MODULES */
__init static int
module_trace_bprintk_format_notify(struct notifier_block *self,
@@ -91,6 +166,13 @@
{
return 0;
}
+static inline const char **
+find_next_mod_format(int start_index, void *v, const char **fmt, loff_t *pos)
+{
+ return NULL;
+}
+static inline void format_mod_start(void) { }
+static inline void format_mod_stop(void) { }
#endif /* CONFIG_MODULES */
@@ -153,20 +235,33 @@
}
EXPORT_SYMBOL_GPL(__ftrace_vprintk);
+static const char **find_next(void *v, loff_t *pos)
+{
+ const char **fmt = v;
+ int start_index;
+
+ if (!fmt)
+ fmt = __start___trace_bprintk_fmt + *pos;
+
+ start_index = __stop___trace_bprintk_fmt - __start___trace_bprintk_fmt;
+
+ if (*pos < start_index)
+ return fmt;
+
+ return find_next_mod_format(start_index, v, fmt, pos);
+}
+
static void *
t_start(struct seq_file *m, loff_t *pos)
{
- const char **fmt = __start___trace_bprintk_fmt + *pos;
-
- if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
- return NULL;
- return fmt;
+ format_mod_start();
+ return find_next(NULL, pos);
}
static void *t_next(struct seq_file *m, void * v, loff_t *pos)
{
(*pos)++;
- return t_start(m, pos);
+ return find_next(v, pos);
}
static int t_show(struct seq_file *m, void *v)
@@ -205,6 +300,7 @@
static void t_stop(struct seq_file *m, void *p)
{
+ format_mod_stop();
}
static const struct seq_operations show_format_seq_ops = {
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 7319559..f029dd4 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -129,6 +129,7 @@
static struct ftrace_ops trace_ops __read_mostly =
{
.func = wakeup_tracer_call,
+ .flags = FTRACE_OPS_FL_GLOBAL,
};
#endif /* CONFIG_FUNCTION_TRACER */
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 659732e..288541f 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -101,6 +101,206 @@
#ifdef CONFIG_DYNAMIC_FTRACE
+static int trace_selftest_test_probe1_cnt;
+static void trace_selftest_test_probe1_func(unsigned long ip,
+ unsigned long pip)
+{
+ trace_selftest_test_probe1_cnt++;
+}
+
+static int trace_selftest_test_probe2_cnt;
+static void trace_selftest_test_probe2_func(unsigned long ip,
+ unsigned long pip)
+{
+ trace_selftest_test_probe2_cnt++;
+}
+
+static int trace_selftest_test_probe3_cnt;
+static void trace_selftest_test_probe3_func(unsigned long ip,
+ unsigned long pip)
+{
+ trace_selftest_test_probe3_cnt++;
+}
+
+static int trace_selftest_test_global_cnt;
+static void trace_selftest_test_global_func(unsigned long ip,
+ unsigned long pip)
+{
+ trace_selftest_test_global_cnt++;
+}
+
+static int trace_selftest_test_dyn_cnt;
+static void trace_selftest_test_dyn_func(unsigned long ip,
+ unsigned long pip)
+{
+ trace_selftest_test_dyn_cnt++;
+}
+
+static struct ftrace_ops test_probe1 = {
+ .func = trace_selftest_test_probe1_func,
+};
+
+static struct ftrace_ops test_probe2 = {
+ .func = trace_selftest_test_probe2_func,
+};
+
+static struct ftrace_ops test_probe3 = {
+ .func = trace_selftest_test_probe3_func,
+};
+
+static struct ftrace_ops test_global = {
+ .func = trace_selftest_test_global_func,
+ .flags = FTRACE_OPS_FL_GLOBAL,
+};
+
+static void print_counts(void)
+{
+ printk("(%d %d %d %d %d) ",
+ trace_selftest_test_probe1_cnt,
+ trace_selftest_test_probe2_cnt,
+ trace_selftest_test_probe3_cnt,
+ trace_selftest_test_global_cnt,
+ trace_selftest_test_dyn_cnt);
+}
+
+static void reset_counts(void)
+{
+ trace_selftest_test_probe1_cnt = 0;
+ trace_selftest_test_probe2_cnt = 0;
+ trace_selftest_test_probe3_cnt = 0;
+ trace_selftest_test_global_cnt = 0;
+ trace_selftest_test_dyn_cnt = 0;
+}
+
+static int trace_selftest_ops(int cnt)
+{
+ int save_ftrace_enabled = ftrace_enabled;
+ struct ftrace_ops *dyn_ops;
+ char *func1_name;
+ char *func2_name;
+ int len1;
+ int len2;
+ int ret = -1;
+
+ printk(KERN_CONT "PASSED\n");
+ pr_info("Testing dynamic ftrace ops #%d: ", cnt);
+
+ ftrace_enabled = 1;
+ reset_counts();
+
+ /* Handle PPC64 '.' name */
+ func1_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
+ func2_name = "*" __stringify(DYN_FTRACE_TEST_NAME2);
+ len1 = strlen(func1_name);
+ len2 = strlen(func2_name);
+
+ /*
+ * Probe 1 will trace function 1.
+ * Probe 2 will trace function 2.
+ * Probe 3 will trace functions 1 and 2.
+ */
+ ftrace_set_filter(&test_probe1, func1_name, len1, 1);
+ ftrace_set_filter(&test_probe2, func2_name, len2, 1);
+ ftrace_set_filter(&test_probe3, func1_name, len1, 1);
+ ftrace_set_filter(&test_probe3, func2_name, len2, 0);
+
+ register_ftrace_function(&test_probe1);
+ register_ftrace_function(&test_probe2);
+ register_ftrace_function(&test_probe3);
+ register_ftrace_function(&test_global);
+
+ DYN_FTRACE_TEST_NAME();
+
+ print_counts();
+
+ if (trace_selftest_test_probe1_cnt != 1)
+ goto out;
+ if (trace_selftest_test_probe2_cnt != 0)
+ goto out;
+ if (trace_selftest_test_probe3_cnt != 1)
+ goto out;
+ if (trace_selftest_test_global_cnt == 0)
+ goto out;
+
+ DYN_FTRACE_TEST_NAME2();
+
+ print_counts();
+
+ if (trace_selftest_test_probe1_cnt != 1)
+ goto out;
+ if (trace_selftest_test_probe2_cnt != 1)
+ goto out;
+ if (trace_selftest_test_probe3_cnt != 2)
+ goto out;
+
+ /* Add a dynamic probe */
+ dyn_ops = kzalloc(sizeof(*dyn_ops), GFP_KERNEL);
+ if (!dyn_ops) {
+ printk("MEMORY ERROR ");
+ goto out;
+ }
+
+ dyn_ops->func = trace_selftest_test_dyn_func;
+
+ register_ftrace_function(dyn_ops);
+
+ trace_selftest_test_global_cnt = 0;
+
+ DYN_FTRACE_TEST_NAME();
+
+ print_counts();
+
+ if (trace_selftest_test_probe1_cnt != 2)
+ goto out_free;
+ if (trace_selftest_test_probe2_cnt != 1)
+ goto out_free;
+ if (trace_selftest_test_probe3_cnt != 3)
+ goto out_free;
+ if (trace_selftest_test_global_cnt == 0)
+ goto out;
+ if (trace_selftest_test_dyn_cnt == 0)
+ goto out_free;
+
+ DYN_FTRACE_TEST_NAME2();
+
+ print_counts();
+
+ if (trace_selftest_test_probe1_cnt != 2)
+ goto out_free;
+ if (trace_selftest_test_probe2_cnt != 2)
+ goto out_free;
+ if (trace_selftest_test_probe3_cnt != 4)
+ goto out_free;
+
+ ret = 0;
+ out_free:
+ unregister_ftrace_function(dyn_ops);
+ kfree(dyn_ops);
+
+ out:
+ /* Purposely unregister in the same order */
+ unregister_ftrace_function(&test_probe1);
+ unregister_ftrace_function(&test_probe2);
+ unregister_ftrace_function(&test_probe3);
+ unregister_ftrace_function(&test_global);
+
+ /* Make sure everything is off */
+ reset_counts();
+ DYN_FTRACE_TEST_NAME();
+ DYN_FTRACE_TEST_NAME();
+
+ if (trace_selftest_test_probe1_cnt ||
+ trace_selftest_test_probe2_cnt ||
+ trace_selftest_test_probe3_cnt ||
+ trace_selftest_test_global_cnt ||
+ trace_selftest_test_dyn_cnt)
+ ret = -1;
+
+ ftrace_enabled = save_ftrace_enabled;
+
+ return ret;
+}
+
/* Test dynamic code modification and ftrace filters */
int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
struct trace_array *tr,
@@ -131,7 +331,7 @@
func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
/* filter only on our function */
- ftrace_set_filter(func_name, strlen(func_name), 1);
+ ftrace_set_global_filter(func_name, strlen(func_name), 1);
/* enable tracing */
ret = tracer_init(trace, tr);
@@ -166,22 +366,30 @@
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
- trace->reset(tr);
tracing_start();
/* we should only have one item */
if (!ret && count != 1) {
+ trace->reset(tr);
printk(KERN_CONT ".. filter failed count=%ld ..", count);
ret = -1;
goto out;
}
+ /* Test the ops with global tracing running */
+ ret = trace_selftest_ops(1);
+ trace->reset(tr);
+
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
/* Enable tracing on all functions again */
- ftrace_set_filter(NULL, 0, 1);
+ ftrace_set_global_filter(NULL, 0, 1);
+
+ /* Test the ops with global tracing off */
+ if (!ret)
+ ret = trace_selftest_ops(2);
return ret;
}
diff --git a/kernel/trace/trace_selftest_dynamic.c b/kernel/trace/trace_selftest_dynamic.c
index 54dd77c..b4c475a 100644
--- a/kernel/trace/trace_selftest_dynamic.c
+++ b/kernel/trace/trace_selftest_dynamic.c
@@ -5,3 +5,9 @@
/* used to call mcount */
return 0;
}
+
+int DYN_FTRACE_TEST_NAME2(void)
+{
+ /* used to call mcount */
+ return 0;
+}
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 4c5dead..b0b53b8 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -133,6 +133,7 @@
static struct ftrace_ops trace_ops __read_mostly =
{
.func = stack_trace_call,
+ .flags = FTRACE_OPS_FL_GLOBAL,
};
static ssize_t
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index 68187af..b219f14 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -251,9 +251,9 @@
{
WARN_ON(strcmp((*entry)->name, elem->name) != 0);
- if (elem->regfunc && !elem->state && active)
+ if (elem->regfunc && !jump_label_enabled(&elem->key) && active)
elem->regfunc();
- else if (elem->unregfunc && elem->state && !active)
+ else if (elem->unregfunc && jump_label_enabled(&elem->key) && !active)
elem->unregfunc();
/*
@@ -264,13 +264,10 @@
* is used.
*/
rcu_assign_pointer(elem->funcs, (*entry)->funcs);
- if (!elem->state && active) {
- jump_label_enable(&elem->state);
- elem->state = active;
- } else if (elem->state && !active) {
- jump_label_disable(&elem->state);
- elem->state = active;
- }
+ if (active && !jump_label_enabled(&elem->key))
+ jump_label_inc(&elem->key);
+ else if (!active && jump_label_enabled(&elem->key))
+ jump_label_dec(&elem->key);
}
/*
@@ -281,13 +278,11 @@
*/
static void disable_tracepoint(struct tracepoint *elem)
{
- if (elem->unregfunc && elem->state)
+ if (elem->unregfunc && jump_label_enabled(&elem->key))
elem->unregfunc();
- if (elem->state) {
- jump_label_disable(&elem->state);
- elem->state = 0;
- }
+ if (jump_label_enabled(&elem->key))
+ jump_label_dec(&elem->key);
rcu_assign_pointer(elem->funcs, NULL);
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index c768bcd..10ef619 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -238,6 +238,21 @@
enabled then all held locks will also be reported. This
feature has negligible overhead.
+config DEFAULT_HUNG_TASK_TIMEOUT
+ int "Default timeout for hung task detection (in seconds)"
+ depends on DETECT_HUNG_TASK
+ default 120
+ help
+ This option controls the default timeout (in seconds) used
+ to determine when a task has become non-responsive and should
+ be considered hung.
+
+ It can be adjusted at runtime via the kernel.hung_task_timeout
+ sysctl or by writing a value to /proc/sys/kernel/hung_task_timeout.
+
+ A timeout of 0 disables the check. The default is two minutes.
+ Keeping the default should be fine in most cases.
+
config BOOTPARAM_HUNG_TASK_PANIC
bool "Panic (Reboot) On Hung Tasks"
depends on DETECT_HUNG_TASK
@@ -337,7 +352,7 @@
config DEBUG_OBJECTS_RCU_HEAD
bool "Debug RCU callbacks objects"
- depends on DEBUG_OBJECTS && PREEMPT
+ depends on DEBUG_OBJECTS
help
Enable this to turn on debugging of RCU list heads (call_rcu() usage).
@@ -398,9 +413,9 @@
config DEBUG_KMEMLEAK
bool "Kernel memory leak detector"
depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
- (X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE)
+ (X86 || ARM || PPC || MIPS || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE)
- select DEBUG_FS if SYSFS
+ select DEBUG_FS
select STACKTRACE if STACKTRACE_SUPPORT
select KALLSYMS
select CRC32
@@ -875,22 +890,9 @@
Say N here if you want the RCU torture tests to start only
after being manually enabled via /proc.
-config RCU_CPU_STALL_DETECTOR
- bool "Check for stalled CPUs delaying RCU grace periods"
- depends on TREE_RCU || TREE_PREEMPT_RCU
- default y
- help
- This option causes RCU to printk information on which
- CPUs are delaying the current grace period, but only when
- the grace period extends for excessive time periods.
-
- Say N if you want to disable such checks.
-
- Say Y if you are unsure.
-
config RCU_CPU_STALL_TIMEOUT
int "RCU CPU stall timeout in seconds"
- depends on RCU_CPU_STALL_DETECTOR
+ depends on TREE_RCU || TREE_PREEMPT_RCU
range 3 300
default 60
help
@@ -899,22 +901,9 @@
RCU grace period persists, additional CPU stall warnings are
printed at more widely spaced intervals.
-config RCU_CPU_STALL_DETECTOR_RUNNABLE
- bool "RCU CPU stall checking starts automatically at boot"
- depends on RCU_CPU_STALL_DETECTOR
- default y
- help
- If set, start checking for RCU CPU stalls immediately on
- boot. Otherwise, RCU CPU stall checking must be manually
- enabled.
-
- Say Y if you are unsure.
-
- Say N if you wish to suppress RCU CPU stall checking during boot.
-
config RCU_CPU_STALL_VERBOSE
bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR"
- depends on RCU_CPU_STALL_DETECTOR && TREE_PREEMPT_RCU
+ depends on TREE_PREEMPT_RCU
default y
help
This option causes RCU to printk detailed per-task information
diff --git a/lib/Makefile b/lib/Makefile
index ef0f285..4b49a24 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,8 @@
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o
+ string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o \
+ bsearch.o
obj-y += kstrtox.o
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
diff --git a/lib/bsearch.c b/lib/bsearch.c
new file mode 100644
index 0000000..5b54758e
--- /dev/null
+++ b/lib/bsearch.c
@@ -0,0 +1,53 @@
+/*
+ * A generic implementation of binary search for the Linux kernel
+ *
+ * Copyright (C) 2008-2009 Ksplice, Inc.
+ * Author: Tim Abbott <tabbott@ksplice.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/bsearch.h>
+
+/*
+ * bsearch - binary search an array of elements
+ * @key: pointer to item being searched for
+ * @base: pointer to first element to search
+ * @num: number of elements
+ * @size: size of each element
+ * @cmp: pointer to comparison function
+ *
+ * This function does a binary search on the given array. The
+ * contents of the array should already be in ascending sorted order
+ * under the provided comparison function.
+ *
+ * Note that the key need not have the same type as the elements in
+ * the array, e.g. key could be a string and the comparison function
+ * could compare the string with the struct's name field. However, if
+ * the key and elements in the array are of the same type, you can use
+ * the same comparison function for both sort() and bsearch().
+ */
+void *bsearch(const void *key, const void *base, size_t num, size_t size,
+ int (*cmp)(const void *key, const void *elt))
+{
+ size_t start = 0, end = num;
+ int result;
+
+ while (start < end) {
+ size_t mid = start + (end - start) / 2;
+
+ result = cmp(key, base + mid * size);
+ if (result < 0)
+ end = mid;
+ else if (result > 0)
+ start = mid + 1;
+ else
+ return (void *)base + mid * size;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(bsearch);
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 4bfb047..db07bfd 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -649,7 +649,7 @@
return -ENOMEM;
}
-static int device_dma_allocations(struct device *dev)
+static int device_dma_allocations(struct device *dev, struct dma_debug_entry **out_entry)
{
struct dma_debug_entry *entry;
unsigned long flags;
@@ -660,8 +660,10 @@
for (i = 0; i < HASH_SIZE; ++i) {
spin_lock(&dma_entry_hash[i].lock);
list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
- if (entry->dev == dev)
+ if (entry->dev == dev) {
count += 1;
+ *out_entry = entry;
+ }
}
spin_unlock(&dma_entry_hash[i].lock);
}
@@ -674,6 +676,7 @@
static int dma_debug_device_change(struct notifier_block *nb, unsigned long action, void *data)
{
struct device *dev = data;
+ struct dma_debug_entry *uninitialized_var(entry);
int count;
if (global_disable)
@@ -681,12 +684,17 @@
switch (action) {
case BUS_NOTIFY_UNBOUND_DRIVER:
- count = device_dma_allocations(dev);
+ count = device_dma_allocations(dev, &entry);
if (count == 0)
break;
- err_printk(dev, NULL, "DMA-API: device driver has pending "
+ err_printk(dev, entry, "DMA-API: device driver has pending "
"DMA allocations while released from device "
- "[count=%d]\n", count);
+ "[count=%d]\n"
+ "One of leaked entries details: "
+ "[device address=0x%016llx] [size=%llu bytes] "
+ "[mapped with %s] [mapped as %s]\n",
+ count, entry->dev_addr, entry->size,
+ dir2name[entry->direction], type2name[entry->type]);
break;
default:
break;
diff --git a/lib/flex_array.c b/lib/flex_array.c
index c0ea40b..854b57b 100644
--- a/lib/flex_array.c
+++ b/lib/flex_array.c
@@ -232,10 +232,10 @@
/**
* flex_array_prealloc - guarantee that array space exists
- * @fa: the flex array for which to preallocate parts
- * @start: index of first array element for which space is allocated
- * @end: index of last (inclusive) element for which space is allocated
- * @flags: page allocation flags
+ * @fa: the flex array for which to preallocate parts
+ * @start: index of first array element for which space is allocated
+ * @nr_elements: number of elements for which space is allocated
+ * @flags: page allocation flags
*
* This will guarantee that no future calls to flex_array_put()
* will allocate memory. It can be used if you are expecting to
@@ -245,14 +245,24 @@
* Locking must be provided by the caller.
*/
int flex_array_prealloc(struct flex_array *fa, unsigned int start,
- unsigned int end, gfp_t flags)
+ unsigned int nr_elements, gfp_t flags)
{
int start_part;
int end_part;
int part_nr;
+ unsigned int end;
struct flex_array_part *part;
- if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+ if (!start && !nr_elements)
+ return 0;
+ if (start >= fa->total_nr_elements)
+ return -ENOSPC;
+ if (!nr_elements)
+ return 0;
+
+ end = start + nr_elements - 1;
+
+ if (end >= fa->total_nr_elements)
return -ENOSPC;
if (elements_fit_in_base(fa))
return 0;
@@ -343,6 +353,8 @@
int part_nr;
int ret = 0;
+ if (!fa->total_nr_elements)
+ return 0;
if (elements_fit_in_base(fa))
return ret;
for (part_nr = 0; part_nr < FLEX_ARRAY_NR_BASE_PTRS; part_nr++) {
diff --git a/lib/string.c b/lib/string.c
index f71bead..01fad9b 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -535,6 +535,35 @@
}
EXPORT_SYMBOL(sysfs_streq);
+/**
+ * strtobool - convert common user inputs into boolean values
+ * @s: input string
+ * @res: result
+ *
+ * This routine returns 0 iff the first character is one of 'Yy1Nn0'.
+ * Otherwise it will return -EINVAL. Value pointed to by res is
+ * updated upon finding a match.
+ */
+int strtobool(const char *s, bool *res)
+{
+ switch (s[0]) {
+ case 'y':
+ case 'Y':
+ case '1':
+ *res = true;
+ break;
+ case 'n':
+ case 'N':
+ case '0':
+ *res = false;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(strtobool);
+
#ifndef __HAVE_ARCH_MEMSET
/**
* memset - Fill a region of memory with the given value
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index bc0ac6b..dfd6019 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -797,7 +797,7 @@
return string(buf, end, uuid, spec);
}
-int kptr_restrict = 1;
+int kptr_restrict __read_mostly;
/*
* Show a '%p' thing. A kernel extension is that the '%p' is followed
diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c
index ea5fa4f..a6cdc96 100644
--- a/lib/xz/xz_dec_lzma2.c
+++ b/lib/xz/xz_dec_lzma2.c
@@ -969,6 +969,9 @@
*/
tmp = b->in[b->in_pos++];
+ if (tmp == 0x00)
+ return XZ_STREAM_END;
+
if (tmp >= 0xE0 || tmp == 0x01) {
s->lzma2.need_props = true;
s->lzma2.need_dict_reset = false;
@@ -1001,9 +1004,6 @@
lzma_reset(s);
}
} else {
- if (tmp == 0x00)
- return XZ_STREAM_END;
-
if (tmp > 0x02)
return XZ_DATA_ERROR;
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c1d5867..aacee45 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1414,9 +1414,12 @@
++(*pos);
list_for_each_continue_rcu(n, &object_list) {
- next_obj = list_entry(n, struct kmemleak_object, object_list);
- if (get_object(next_obj))
+ struct kmemleak_object *obj =
+ list_entry(n, struct kmemleak_object, object_list);
+ if (get_object(obj)) {
+ next_obj = obj;
break;
+ }
}
put_object(prev_obj);
diff --git a/mm/memory.c b/mm/memory.c
index 607098d4..61e66f0 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1359,7 +1359,7 @@
*/
mark_page_accessed(page);
}
- if (flags & FOLL_MLOCK) {
+ if ((flags & FOLL_MLOCK) && (vma->vm_flags & VM_LOCKED)) {
/*
* The preliminary mapping check is mainly to avoid the
* pointless overhead of lock_page on the ZERO_PAGE
@@ -1412,9 +1412,8 @@
static inline int stack_guard_page(struct vm_area_struct *vma, unsigned long addr)
{
- return (vma->vm_flags & VM_GROWSDOWN) &&
- (vma->vm_start == addr) &&
- !vma_stack_continue(vma->vm_prev, addr);
+ return stack_guard_page_start(vma, addr) ||
+ stack_guard_page_end(vma, addr+PAGE_SIZE);
}
/**
@@ -1551,13 +1550,6 @@
continue;
}
- /*
- * If we don't actually want the page itself,
- * and it's the stack guard page, just skip it.
- */
- if (!pages && stack_guard_page(vma, start))
- goto next_page;
-
do {
struct page *page;
unsigned int foll_flags = gup_flags;
@@ -1574,6 +1566,11 @@
int ret;
unsigned int fault_flags = 0;
+ /* For mlock, just skip the stack guard page. */
+ if (foll_flags & FOLL_MLOCK) {
+ if (stack_guard_page(vma, start))
+ goto next_page;
+ }
if (foll_flags & FOLL_WRITE)
fault_flags |= FAULT_FLAG_WRITE;
if (nonblocking)
diff --git a/mm/mlock.c b/mm/mlock.c
index 6b55e3e..516b2c2 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -162,7 +162,7 @@
VM_BUG_ON(end > vma->vm_end);
VM_BUG_ON(!rwsem_is_locked(&mm->mmap_sem));
- gup_flags = FOLL_TOUCH;
+ gup_flags = FOLL_TOUCH | FOLL_MLOCK;
/*
* We want to touch writable mappings with a write fault in order
* to break COW, except for shared mappings because these don't COW
@@ -178,9 +178,6 @@
if (vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))
gup_flags |= FOLL_FORCE;
- if (vma->vm_flags & VM_LOCKED)
- gup_flags |= FOLL_MLOCK;
-
return __get_user_pages(current, mm, addr, nr_pages, gup_flags,
NULL, NULL, nonblocking);
}
diff --git a/mm/mmap.c b/mm/mmap.c
index e27e0cf..772140c 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1767,10 +1767,13 @@
size = address - vma->vm_start;
grow = (address - vma->vm_end) >> PAGE_SHIFT;
- error = acct_stack_growth(vma, size, grow);
- if (!error) {
- vma->vm_end = address;
- perf_event_mmap(vma);
+ error = -ENOMEM;
+ if (vma->vm_pgoff + (size >> PAGE_SHIFT) >= vma->vm_pgoff) {
+ error = acct_stack_growth(vma, size, grow);
+ if (!error) {
+ vma->vm_end = address;
+ perf_event_mmap(vma);
+ }
}
}
vma_unlock_anon_vma(vma);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 9f8a97b..d49df78 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -54,6 +54,7 @@
#include <trace/events/kmem.h>
#include <linux/ftrace_event.h>
#include <linux/memcontrol.h>
+#include <linux/prefetch.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
@@ -2317,6 +2318,21 @@
EXPORT_SYMBOL(free_pages);
+static void *make_alloc_exact(unsigned long addr, unsigned order, size_t size)
+{
+ if (addr) {
+ unsigned long alloc_end = addr + (PAGE_SIZE << order);
+ unsigned long used = addr + PAGE_ALIGN(size);
+
+ split_page(virt_to_page((void *)addr), order);
+ while (used < alloc_end) {
+ free_page(used);
+ used += PAGE_SIZE;
+ }
+ }
+ return (void *)addr;
+}
+
/**
* alloc_pages_exact - allocate an exact number physically-contiguous pages.
* @size: the number of bytes to allocate
@@ -2336,22 +2352,33 @@
unsigned long addr;
addr = __get_free_pages(gfp_mask, order);
- if (addr) {
- unsigned long alloc_end = addr + (PAGE_SIZE << order);
- unsigned long used = addr + PAGE_ALIGN(size);
-
- split_page(virt_to_page((void *)addr), order);
- while (used < alloc_end) {
- free_page(used);
- used += PAGE_SIZE;
- }
- }
-
- return (void *)addr;
+ return make_alloc_exact(addr, order, size);
}
EXPORT_SYMBOL(alloc_pages_exact);
/**
+ * alloc_pages_exact_nid - allocate an exact number of physically-contiguous
+ * pages on a node.
+ * @nid: the preferred node ID where memory should be allocated
+ * @size: the number of bytes to allocate
+ * @gfp_mask: GFP flags for the allocation
+ *
+ * Like alloc_pages_exact(), but try to allocate on node nid first before falling
+ * back.
+ * Note this is not alloc_pages_exact_node() which allocates on a specific node,
+ * but is not exact.
+ */
+void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask)
+{
+ unsigned order = get_order(size);
+ struct page *p = alloc_pages_node(nid, gfp_mask, order);
+ if (!p)
+ return NULL;
+ return make_alloc_exact((unsigned long)page_address(p), order, size);
+}
+EXPORT_SYMBOL(alloc_pages_exact_nid);
+
+/**
* free_pages_exact - release memory allocated via alloc_pages_exact()
* @virt: the value returned by alloc_pages_exact.
* @size: size of allocation, same value as passed to alloc_pages_exact().
@@ -3564,7 +3591,7 @@
if (!slab_is_available()) {
zone->wait_table = (wait_queue_head_t *)
- alloc_bootmem_node(pgdat, alloc_size);
+ alloc_bootmem_node_nopanic(pgdat, alloc_size);
} else {
/*
* This case means that a zone whose size was 0 gets new memory
@@ -4141,7 +4168,8 @@
unsigned long usemapsize = usemap_size(zonesize);
zone->pageblock_flags = NULL;
if (usemapsize)
- zone->pageblock_flags = alloc_bootmem_node(pgdat, usemapsize);
+ zone->pageblock_flags = alloc_bootmem_node_nopanic(pgdat,
+ usemapsize);
}
#else
static inline void setup_usemap(struct pglist_data *pgdat,
@@ -4307,7 +4335,7 @@
size = (end - start) * sizeof(struct page);
map = alloc_remap(pgdat->node_id, size);
if (!map)
- map = alloc_bootmem_node(pgdat, size);
+ map = alloc_bootmem_node_nopanic(pgdat, size);
pgdat->node_mem_map = map + (pgdat->node_start_pfn - start);
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 9905501..2daadc3 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -134,7 +134,7 @@
{
void *addr = NULL;
- addr = alloc_pages_exact(size, GFP_KERNEL | __GFP_NOWARN);
+ addr = alloc_pages_exact_nid(nid, size, GFP_KERNEL | __GFP_NOWARN);
if (addr)
return addr;
diff --git a/mm/prio_tree.c b/mm/prio_tree.c
index 603ae98..799dcfd 100644
--- a/mm/prio_tree.c
+++ b/mm/prio_tree.c
@@ -13,6 +13,7 @@
#include <linux/mm.h>
#include <linux/prio_tree.h>
+#include <linux/prefetch.h>
/*
* See lib/prio_tree.c for details on the general radix priority search tree
diff --git a/mm/shmem.c b/mm/shmem.c
index 8fa27e4..ba4ad28 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -852,7 +852,7 @@
static int shmem_unuse_inode(struct shmem_inode_info *info, swp_entry_t entry, struct page *page)
{
- struct inode *inode;
+ struct address_space *mapping;
unsigned long idx;
unsigned long size;
unsigned long limit;
@@ -875,8 +875,10 @@
if (size > SHMEM_NR_DIRECT)
size = SHMEM_NR_DIRECT;
offset = shmem_find_swp(entry, ptr, ptr+size);
- if (offset >= 0)
+ if (offset >= 0) {
+ shmem_swp_balance_unmap();
goto found;
+ }
if (!info->i_indirect)
goto lost2;
@@ -917,6 +919,7 @@
shmem_swp_unmap(ptr);
if (offset >= 0) {
shmem_dir_unmap(dir);
+ ptr = shmem_swp_map(subdir);
goto found;
}
}
@@ -928,8 +931,7 @@
return 0;
found:
idx += offset;
- inode = igrab(&info->vfs_inode);
- spin_unlock(&info->lock);
+ ptr += offset;
/*
* Move _head_ to start search for next from here.
@@ -940,37 +942,18 @@
*/
if (shmem_swaplist.next != &info->swaplist)
list_move_tail(&shmem_swaplist, &info->swaplist);
- mutex_unlock(&shmem_swaplist_mutex);
- error = 1;
- if (!inode)
- goto out;
/*
- * Charge page using GFP_KERNEL while we can wait.
- * Charged back to the user(not to caller) when swap account is used.
- * add_to_page_cache() will be called with GFP_NOWAIT.
+ * We rely on shmem_swaplist_mutex, not only to protect the swaplist,
+ * but also to hold up shmem_evict_inode(): so inode cannot be freed
+ * beneath us (pagelock doesn't help until the page is in pagecache).
*/
- error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
- if (error)
- goto out;
- error = radix_tree_preload(GFP_KERNEL);
- if (error) {
- mem_cgroup_uncharge_cache_page(page);
- goto out;
- }
- error = 1;
-
- spin_lock(&info->lock);
- ptr = shmem_swp_entry(info, idx, NULL);
- if (ptr && ptr->val == entry.val) {
- error = add_to_page_cache_locked(page, inode->i_mapping,
- idx, GFP_NOWAIT);
- /* does mem_cgroup_uncharge_cache_page on error */
- } else /* we must compensate for our precharge above */
- mem_cgroup_uncharge_cache_page(page);
+ mapping = info->vfs_inode.i_mapping;
+ error = add_to_page_cache_locked(page, mapping, idx, GFP_NOWAIT);
+ /* which does mem_cgroup_uncharge_cache_page on error */
if (error == -EEXIST) {
- struct page *filepage = find_get_page(inode->i_mapping, idx);
+ struct page *filepage = find_get_page(mapping, idx);
error = 1;
if (filepage) {
/*
@@ -990,14 +973,8 @@
swap_free(entry);
error = 1; /* not an error, but entry was found */
}
- if (ptr)
- shmem_swp_unmap(ptr);
+ shmem_swp_unmap(ptr);
spin_unlock(&info->lock);
- radix_tree_preload_end();
-out:
- unlock_page(page);
- page_cache_release(page);
- iput(inode); /* allows for NULL */
return error;
}
@@ -1009,6 +986,26 @@
struct list_head *p, *next;
struct shmem_inode_info *info;
int found = 0;
+ int error;
+
+ /*
+ * Charge page using GFP_KERNEL while we can wait, before taking
+ * the shmem_swaplist_mutex which might hold up shmem_writepage().
+ * Charged back to the user (not to caller) when swap account is used.
+ * add_to_page_cache() will be called with GFP_NOWAIT.
+ */
+ error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
+ if (error)
+ goto out;
+ /*
+ * Try to preload while we can wait, to not make a habit of
+ * draining atomic reserves; but don't latch on to this cpu,
+ * it's okay if sometimes we get rescheduled after this.
+ */
+ error = radix_tree_preload(GFP_KERNEL);
+ if (error)
+ goto uncharge;
+ radix_tree_preload_end();
mutex_lock(&shmem_swaplist_mutex);
list_for_each_safe(p, next, &shmem_swaplist) {
@@ -1016,17 +1013,19 @@
found = shmem_unuse_inode(info, entry, page);
cond_resched();
if (found)
- goto out;
+ break;
}
mutex_unlock(&shmem_swaplist_mutex);
- /*
- * Can some race bring us here? We've been holding page lock,
- * so I think not; but would rather try again later than BUG()
- */
+
+uncharge:
+ if (!found)
+ mem_cgroup_uncharge_cache_page(page);
+ if (found < 0)
+ error = found;
+out:
unlock_page(page);
page_cache_release(page);
-out:
- return (found < 0) ? found : 0;
+ return error;
}
/*
@@ -1064,7 +1063,25 @@
else
swap.val = 0;
+ /*
+ * Add inode to shmem_unuse()'s list of swapped-out inodes,
+ * if it's not already there. Do it now because we cannot take
+ * mutex while holding spinlock, and must do so before the page
+ * is moved to swap cache, when its pagelock no longer protects
+ * the inode from eviction. But don't unlock the mutex until
+ * we've taken the spinlock, because shmem_unuse_inode() will
+ * prune a !swapped inode from the swaplist under both locks.
+ */
+ if (swap.val) {
+ mutex_lock(&shmem_swaplist_mutex);
+ if (list_empty(&info->swaplist))
+ list_add_tail(&info->swaplist, &shmem_swaplist);
+ }
+
spin_lock(&info->lock);
+ if (swap.val)
+ mutex_unlock(&shmem_swaplist_mutex);
+
if (index >= info->next_index) {
BUG_ON(!(info->flags & SHMEM_TRUNCATE));
goto unlock;
@@ -1084,21 +1101,10 @@
delete_from_page_cache(page);
shmem_swp_set(info, entry, swap.val);
shmem_swp_unmap(entry);
- if (list_empty(&info->swaplist))
- inode = igrab(inode);
- else
- inode = NULL;
spin_unlock(&info->lock);
swap_shmem_alloc(swap);
BUG_ON(page_mapped(page));
swap_writepage(page, wbc);
- if (inode) {
- mutex_lock(&shmem_swaplist_mutex);
- /* move instead of add in case we're racing */
- list_move_tail(&info->swaplist, &shmem_swaplist);
- mutex_unlock(&shmem_swaplist_mutex);
- iput(inode);
- }
return 0;
}
@@ -1400,20 +1406,14 @@
if (sbinfo->max_blocks) {
if (percpu_counter_compare(&sbinfo->used_blocks,
sbinfo->max_blocks) >= 0 ||
- shmem_acct_block(info->flags)) {
- spin_unlock(&info->lock);
- error = -ENOSPC;
- goto failed;
- }
+ shmem_acct_block(info->flags))
+ goto nospace;
percpu_counter_inc(&sbinfo->used_blocks);
spin_lock(&inode->i_lock);
inode->i_blocks += BLOCKS_PER_PAGE;
spin_unlock(&inode->i_lock);
- } else if (shmem_acct_block(info->flags)) {
- spin_unlock(&info->lock);
- error = -ENOSPC;
- goto failed;
- }
+ } else if (shmem_acct_block(info->flags))
+ goto nospace;
if (!filepage) {
int ret;
@@ -1493,6 +1493,24 @@
error = 0;
goto out;
+nospace:
+ /*
+ * Perhaps the page was brought in from swap between find_lock_page
+ * and taking info->lock? We allow for that at add_to_page_cache_lru,
+ * but must also avoid reporting a spurious ENOSPC while working on a
+ * full tmpfs. (When filepage has been passed in to shmem_getpage, it
+ * is already in page cache, which prevents this race from occurring.)
+ */
+ if (!filepage) {
+ struct page *page = find_get_page(mapping, idx);
+ if (page) {
+ spin_unlock(&info->lock);
+ page_cache_release(page);
+ goto repeat;
+ }
+ }
+ spin_unlock(&info->lock);
+ error = -ENOSPC;
failed:
if (*pagep != filepage) {
unlock_page(filepage);
diff --git a/mm/slab.c b/mm/slab.c
index 46a9c16..bcfa498 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -115,6 +115,7 @@
#include <linux/debugobjects.h>
#include <linux/kmemcheck.h>
#include <linux/memory.h>
+#include <linux/prefetch.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
diff --git a/mm/slub.c b/mm/slub.c
index 94d2a33..9d2e5e4 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1940,7 +1940,7 @@
* Since this is without lock semantics the protection is only against
* code executing on this cpu *not* from access by other cpus.
*/
- if (unlikely(!this_cpu_cmpxchg_double(
+ if (unlikely(!irqsafe_cpu_cmpxchg_double(
s->cpu_slab->freelist, s->cpu_slab->tid,
object, tid,
get_freepointer(s, object), next_tid(tid)))) {
@@ -2145,7 +2145,7 @@
set_freepointer(s, object, c->freelist);
#ifdef CONFIG_CMPXCHG_LOCAL
- if (unlikely(!this_cpu_cmpxchg_double(
+ if (unlikely(!irqsafe_cpu_cmpxchg_double(
s->cpu_slab->freelist, s->cpu_slab->tid,
c->freelist, tid,
object, next_tid(tid)))) {
diff --git a/mm/swap.c b/mm/swap.c
index a448db3..5602f1a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -396,6 +396,9 @@
if (!PageLRU(page))
return;
+ if (PageUnevictable(page))
+ return;
+
/* Some processes are using the page */
if (page_mapped(page))
return;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index f6b435c..c917720 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -42,6 +42,7 @@
#include <linux/delayacct.h>
#include <linux/sysctl.h>
#include <linux/oom.h>
+#include <linux/prefetch.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
@@ -937,7 +938,7 @@
* back off and wait for congestion to clear because further reclaim
* will encounter the same problem
*/
- if (nr_dirty == nr_congested && nr_dirty != 0)
+ if (nr_dirty && nr_dirty == nr_congested && scanning_global_lru(sc))
zone_set_flag(zone, ZONE_CONGESTED);
free_page_list(&free_pages);
diff --git a/net/802/garp.c b/net/802/garp.c
index c1df2da..1610295 100644
--- a/net/802/garp.c
+++ b/net/802/garp.c
@@ -554,8 +554,7 @@
return;
}
rcu_assign_pointer(dev->garp_port, NULL);
- synchronize_rcu();
- kfree(port);
+ kfree_rcu(port, rcu);
}
int garp_init_applicant(struct net_device *dev, struct garp_application *appl)
@@ -607,7 +606,6 @@
ASSERT_RTNL();
rcu_assign_pointer(port->applicants[appl->type], NULL);
- synchronize_rcu();
/* Delete timer and generate a final TRANSMIT_PDU event to flush out
* all pending messages before the applicant is gone. */
@@ -617,7 +615,7 @@
garp_queue_xmit(app);
dev_mc_del(dev, appl->proto.group_address);
- kfree(app);
+ kfree_rcu(app, rcu);
garp_release_port(dev);
}
EXPORT_SYMBOL_GPL(garp_uninit_applicant);
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 7850412..b2274d1 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -49,11 +49,6 @@
static const char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
static const char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";
-static struct packet_type vlan_packet_type __read_mostly = {
- .type = cpu_to_be16(ETH_P_8021Q),
- .func = vlan_skb_recv, /* VLAN receive method */
-};
-
/* End of global variables definitions. */
static void vlan_group_free(struct vlan_group *grp)
@@ -124,10 +119,14 @@
grp->nr_vlans--;
- vlan_group_set_device(grp, vlan_id, NULL);
- if (!grp->killall)
- synchronize_net();
+ if (vlan->flags & VLAN_FLAG_GVRP)
+ vlan_gvrp_request_leave(dev);
+ vlan_group_set_device(grp, vlan_id, NULL);
+ /* Because unregister_netdevice_queue() makes sure at least one rcu
+ * grace period is respected before device freeing,
+ * we dont need to call synchronize_net() here.
+ */
unregister_netdevice_queue(dev, head);
/* If the group is now empty, kill off the group. */
@@ -327,10 +326,6 @@
static void vlan_transfer_features(struct net_device *dev,
struct net_device *vlandev)
{
- u32 old_features = vlandev->features;
-
- vlandev->features &= ~dev->vlan_features;
- vlandev->features |= dev->features & dev->vlan_features;
vlandev->gso_max_size = dev->gso_max_size;
if (dev->features & NETIF_F_HW_VLAN_TX)
@@ -341,8 +336,8 @@
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
#endif
- if (old_features != vlandev->features)
- netdev_features_change(vlandev);
+
+ netdev_update_features(vlandev);
}
static void __vlan_device_event(struct net_device *dev, unsigned long event)
@@ -487,9 +482,6 @@
if (dev->reg_state != NETREG_UNREGISTERING)
break;
- /* Delete all VLANs for this dev. */
- grp->killall = 1;
-
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
@@ -508,6 +500,18 @@
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
return NOTIFY_BAD;
+
+ case NETDEV_NOTIFY_PEERS:
+ case NETDEV_BONDING_FAILOVER:
+ /* Propagate to vlan devices */
+ for (i = 0; i < VLAN_N_VID; i++) {
+ vlandev = vlan_group_get_device(grp, i);
+ if (!vlandev)
+ continue;
+
+ call_netdevice_notifiers(event, vlandev);
+ }
+ break;
}
out:
@@ -688,7 +692,6 @@
if (err < 0)
goto err4;
- dev_add_pack(&vlan_packet_type);
vlan_ioctl_set(vlan_ioctl_handler);
return 0;
@@ -709,8 +712,6 @@
unregister_netdevice_notifier(&vlan_notifier_block);
- dev_remove_pack(&vlan_packet_type);
-
unregister_pernet_subsys(&vlan_net_ops);
rcu_barrier(); /* Wait for completion of call_rcu()'s */
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 5687c9b..c3408de 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -75,8 +75,6 @@
}
/* found in vlan_dev.c */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *ptype, struct net_device *orig_dev);
void vlan_dev_set_ingress_priority(const struct net_device *dev,
u32 skb_prio, u16 vlan_prio);
int vlan_dev_set_egress_priority(const struct net_device *dev,
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index ce8e3ab..41495dc2 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -4,7 +4,7 @@
#include <linux/netpoll.h>
#include "vlan.h"
-bool vlan_hwaccel_do_receive(struct sk_buff **skbp)
+bool vlan_do_receive(struct sk_buff **skbp)
{
struct sk_buff *skb = *skbp;
u16 vlan_id = skb->vlan_tci & VLAN_VID_MASK;
@@ -88,3 +88,86 @@
return napi_gro_frags(napi);
}
EXPORT_SYMBOL(vlan_gro_frags);
+
+static struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+{
+ if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
+ if (skb_cow(skb, skb_headroom(skb)) < 0)
+ skb = NULL;
+ if (skb) {
+ /* Lifted from Gleb's VLAN code... */
+ memmove(skb->data - ETH_HLEN,
+ skb->data - VLAN_ETH_HLEN, 12);
+ skb->mac_header += VLAN_HLEN;
+ }
+ }
+ return skb;
+}
+
+static void vlan_set_encap_proto(struct sk_buff *skb, struct vlan_hdr *vhdr)
+{
+ __be16 proto;
+ unsigned char *rawp;
+
+ /*
+ * Was a VLAN packet, grab the encapsulated protocol, which the layer
+ * three protocols care about.
+ */
+
+ proto = vhdr->h_vlan_encapsulated_proto;
+ if (ntohs(proto) >= 1536) {
+ skb->protocol = proto;
+ return;
+ }
+
+ rawp = skb->data;
+ if (*(unsigned short *) rawp == 0xFFFF)
+ /*
+ * This is a magic hack to spot IPX packets. Older Novell
+ * breaks the protocol design and runs IPX over 802.3 without
+ * an 802.2 LLC layer. We look for FFFF which isn't a used
+ * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
+ * but does for the rest.
+ */
+ skb->protocol = htons(ETH_P_802_3);
+ else
+ /*
+ * Real 802.2 LLC
+ */
+ skb->protocol = htons(ETH_P_802_2);
+}
+
+struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+ struct vlan_hdr *vhdr;
+ u16 vlan_tci;
+
+ if (unlikely(vlan_tx_tag_present(skb))) {
+ /* vlan_tci is already set-up so leave this for another time */
+ return skb;
+ }
+
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ if (unlikely(!skb))
+ goto err_free;
+
+ if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
+ goto err_free;
+
+ vhdr = (struct vlan_hdr *) skb->data;
+ vlan_tci = ntohs(vhdr->h_vlan_TCI);
+ __vlan_hwaccel_put_tag(skb, vlan_tci);
+
+ skb_pull_rcsum(skb, VLAN_HLEN);
+ vlan_set_encap_proto(skb, vhdr);
+
+ skb = vlan_check_reorder_header(skb);
+ if (unlikely(!skb))
+ goto err_free;
+
+ return skb;
+
+err_free:
+ kfree_skb(skb);
+ return NULL;
+}
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index e34ea9e..f247f5b 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -65,179 +65,6 @@
return 0;
}
-static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
-{
- if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
- if (skb_cow(skb, skb_headroom(skb)) < 0)
- skb = NULL;
- if (skb) {
- /* Lifted from Gleb's VLAN code... */
- memmove(skb->data - ETH_HLEN,
- skb->data - VLAN_ETH_HLEN, 12);
- skb->mac_header += VLAN_HLEN;
- }
- }
-
- return skb;
-}
-
-static inline void vlan_set_encap_proto(struct sk_buff *skb,
- struct vlan_hdr *vhdr)
-{
- __be16 proto;
- unsigned char *rawp;
-
- /*
- * Was a VLAN packet, grab the encapsulated protocol, which the layer
- * three protocols care about.
- */
-
- proto = vhdr->h_vlan_encapsulated_proto;
- if (ntohs(proto) >= 1536) {
- skb->protocol = proto;
- return;
- }
-
- rawp = skb->data;
- if (*(unsigned short *)rawp == 0xFFFF)
- /*
- * This is a magic hack to spot IPX packets. Older Novell
- * breaks the protocol design and runs IPX over 802.3 without
- * an 802.2 LLC layer. We look for FFFF which isn't a used
- * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
- * but does for the rest.
- */
- skb->protocol = htons(ETH_P_802_3);
- else
- /*
- * Real 802.2 LLC
- */
- skb->protocol = htons(ETH_P_802_2);
-}
-
-/*
- * Determine the packet's protocol ID. The rule here is that we
- * assume 802.3 if the type field is short enough to be a length.
- * This is normal practice and works for any 'now in use' protocol.
- *
- * Also, at this point we assume that we ARE dealing exclusively with
- * VLAN packets, or packets that should be made into VLAN packets based
- * on a default VLAN ID.
- *
- * NOTE: Should be similar to ethernet/eth.c.
- *
- * SANITY NOTE: This method is called when a packet is moving up the stack
- * towards userland. To get here, it would have already passed
- * through the ethernet/eth.c eth_type_trans() method.
- * SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be
- * stored UNALIGNED in the memory. RISC systems don't like
- * such cases very much...
- * SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be
- * aligned, so there doesn't need to be any of the unaligned
- * stuff. It has been commented out now... --Ben
- *
- */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *ptype, struct net_device *orig_dev)
-{
- struct vlan_hdr *vhdr;
- struct vlan_pcpu_stats *rx_stats;
- struct net_device *vlan_dev;
- u16 vlan_id;
- u16 vlan_tci;
-
- skb = skb_share_check(skb, GFP_ATOMIC);
- if (skb == NULL)
- goto err_free;
-
- if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
- goto err_free;
-
- vhdr = (struct vlan_hdr *)skb->data;
- vlan_tci = ntohs(vhdr->h_vlan_TCI);
- vlan_id = vlan_tci & VLAN_VID_MASK;
-
- rcu_read_lock();
- vlan_dev = vlan_find_dev(dev, vlan_id);
-
- /* If the VLAN device is defined, we use it.
- * If not, and the VID is 0, it is a 802.1p packet (not
- * really a VLAN), so we will just netif_rx it later to the
- * original interface, but with the skb->proto set to the
- * wrapped proto: we do nothing here.
- */
-
- if (!vlan_dev) {
- if (vlan_id) {
- pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s\n",
- __func__, vlan_id, dev->name);
- goto err_unlock;
- }
- rx_stats = NULL;
- } else {
- skb->dev = vlan_dev;
-
- rx_stats = this_cpu_ptr(vlan_dev_info(skb->dev)->vlan_pcpu_stats);
-
- u64_stats_update_begin(&rx_stats->syncp);
- rx_stats->rx_packets++;
- rx_stats->rx_bytes += skb->len;
-
- skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci);
-
- pr_debug("%s: priority: %u for TCI: %hu\n",
- __func__, skb->priority, vlan_tci);
-
- switch (skb->pkt_type) {
- case PACKET_BROADCAST:
- /* Yeah, stats collect these together.. */
- /* stats->broadcast ++; // no such counter :-( */
- break;
-
- case PACKET_MULTICAST:
- rx_stats->rx_multicast++;
- break;
-
- case PACKET_OTHERHOST:
- /* Our lower layer thinks this is not local, let's make
- * sure.
- * This allows the VLAN to have a different MAC than the
- * underlying device, and still route correctly.
- */
- if (!compare_ether_addr(eth_hdr(skb)->h_dest,
- skb->dev->dev_addr))
- skb->pkt_type = PACKET_HOST;
- break;
- default:
- break;
- }
- u64_stats_update_end(&rx_stats->syncp);
- }
-
- skb_pull_rcsum(skb, VLAN_HLEN);
- vlan_set_encap_proto(skb, vhdr);
-
- if (vlan_dev) {
- skb = vlan_check_reorder_header(skb);
- if (!skb) {
- rx_stats->rx_errors++;
- goto err_unlock;
- }
- }
-
- netif_rx(skb);
-
- rcu_read_unlock();
- return NET_RX_SUCCESS;
-
-err_unlock:
- rcu_read_unlock();
-err_free:
- atomic_long_inc(&dev->rx_dropped);
- kfree_skb(skb);
- return NET_RX_DROP;
-}
-
static inline u16
vlan_dev_get_egress_qos_mask(struct net_device *dev, struct sk_buff *skb)
{
@@ -487,9 +314,6 @@
struct vlan_dev_info *vlan = vlan_dev_info(dev);
struct net_device *real_dev = vlan->real_dev;
- if (vlan->flags & VLAN_FLAG_GVRP)
- vlan_gvrp_request_leave(dev);
-
dev_mc_unsync(real_dev, dev);
dev_uc_unsync(real_dev, dev);
if (dev->flags & IFF_ALLMULTI)
@@ -704,8 +528,8 @@
(1<<__LINK_STATE_DORMANT))) |
(1<<__LINK_STATE_PRESENT);
- dev->features |= real_dev->features & real_dev->vlan_features;
- dev->features |= NETIF_F_LLTX;
+ dev->hw_features = NETIF_F_ALL_TX_OFFLOADS;
+ dev->features |= real_dev->vlan_features | NETIF_F_LLTX;
dev->gso_max_size = real_dev->gso_max_size;
/* ipv6 shared card related stuff */
@@ -759,6 +583,19 @@
}
}
+static u32 vlan_dev_fix_features(struct net_device *dev, u32 features)
+{
+ struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+
+ features &= real_dev->features;
+ features &= real_dev->vlan_features;
+ if (dev_ethtool_get_rx_csum(real_dev))
+ features |= NETIF_F_RXCSUM;
+ features |= NETIF_F_LLTX;
+
+ return features;
+}
+
static int vlan_ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
@@ -774,18 +611,6 @@
strcpy(info->fw_version, "N/A");
}
-static u32 vlan_ethtool_get_rx_csum(struct net_device *dev)
-{
- const struct vlan_dev_info *vlan = vlan_dev_info(dev);
- return dev_ethtool_get_rx_csum(vlan->real_dev);
-}
-
-static u32 vlan_ethtool_get_flags(struct net_device *dev)
-{
- const struct vlan_dev_info *vlan = vlan_dev_info(dev);
- return dev_ethtool_get_flags(vlan->real_dev);
-}
-
static struct rtnl_link_stats64 *vlan_dev_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
{
@@ -823,32 +648,10 @@
return stats;
}
-static int vlan_ethtool_set_tso(struct net_device *dev, u32 data)
-{
- if (data) {
- struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
-
- /* Underlying device must support TSO for VLAN-tagged packets
- * and must have TSO enabled now.
- */
- if (!(real_dev->vlan_features & NETIF_F_TSO))
- return -EOPNOTSUPP;
- if (!(real_dev->features & NETIF_F_TSO))
- return -EINVAL;
- dev->features |= NETIF_F_TSO;
- } else {
- dev->features &= ~NETIF_F_TSO;
- }
- return 0;
-}
-
static const struct ethtool_ops vlan_ethtool_ops = {
.get_settings = vlan_ethtool_get_settings,
.get_drvinfo = vlan_ethtool_get_drvinfo,
.get_link = ethtool_op_get_link,
- .get_rx_csum = vlan_ethtool_get_rx_csum,
- .get_flags = vlan_ethtool_get_flags,
- .set_tso = vlan_ethtool_set_tso,
};
static const struct net_device_ops vlan_netdev_ops = {
@@ -874,6 +677,7 @@
.ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
.ndo_fcoe_ddp_target = vlan_dev_fcoe_ddp_target,
#endif
+ .ndo_fix_features = vlan_dev_fix_features,
};
void vlan_setup(struct net_device *dev)
diff --git a/net/9p/client.c b/net/9p/client.c
index 7736774..ceab943 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -614,7 +614,7 @@
err = c->trans_mod->request(c, req);
if (err < 0) {
- if (err != -ERESTARTSYS)
+ if (err != -ERESTARTSYS && err != -EFAULT)
c->status = Disconnected;
goto reterr;
}
@@ -1281,7 +1281,7 @@
p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset,
u32 count)
{
- int err, rsize, total;
+ int err, rsize;
struct p9_client *clnt;
struct p9_req_t *req;
char *dataptr;
@@ -1290,7 +1290,6 @@
(long long unsigned) offset, count);
err = 0;
clnt = fid->clnt;
- total = 0;
rsize = fid->iounit;
if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
@@ -1346,7 +1345,7 @@
p9_client_write(struct p9_fid *fid, char *data, const char __user *udata,
u64 offset, u32 count)
{
- int err, rsize, total;
+ int err, rsize;
struct p9_client *clnt;
struct p9_req_t *req;
@@ -1354,7 +1353,6 @@
fid->fid, (long long unsigned) offset, count);
err = 0;
clnt = fid->clnt;
- total = 0;
rsize = fid->iounit;
if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
@@ -1745,7 +1743,7 @@
int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset)
{
- int err, rsize, total;
+ int err, rsize;
struct p9_client *clnt;
struct p9_req_t *req;
char *dataptr;
@@ -1755,7 +1753,6 @@
err = 0;
clnt = fid->clnt;
- total = 0;
rsize = fid->iounit;
if (!rsize || rsize > clnt->msize-P9_READDIRHDRSZ)
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index b58a501..a873277 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -674,6 +674,7 @@
}
strcpy(dirent->d_name, nameptr);
+ kfree(nameptr);
out:
return fake_pdu.offset;
diff --git a/net/9p/trans_common.c b/net/9p/trans_common.c
index e883172..9a70ebd 100644
--- a/net/9p/trans_common.c
+++ b/net/9p/trans_common.c
@@ -63,7 +63,7 @@
int nr_pages, u8 rw)
{
uint32_t first_page_bytes = 0;
- uint32_t pdata_mapped_pages;
+ int32_t pdata_mapped_pages;
struct trans_rpage_info *rpinfo;
*pdata_off = (__force size_t)req->tc->pubuf & (PAGE_SIZE-1);
@@ -75,14 +75,9 @@
rpinfo = req->tc->private;
pdata_mapped_pages = get_user_pages_fast((unsigned long)req->tc->pubuf,
nr_pages, rw, &rpinfo->rp_data[0]);
+ if (pdata_mapped_pages <= 0)
+ return pdata_mapped_pages;
- if (pdata_mapped_pages < 0) {
- printk(KERN_ERR "get_user_pages_fast failed:%d udata:%p"
- "nr_pages:%d\n", pdata_mapped_pages,
- req->tc->pubuf, nr_pages);
- pdata_mapped_pages = 0;
- return -EIO;
- }
rpinfo->rp_nr_pages = pdata_mapped_pages;
if (*pdata_off) {
*pdata_len = first_page_bytes;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index aa5672b..4a90843 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -716,7 +716,6 @@
substring_t args[MAX_OPT_ARGS];
int option;
char *options, *tmp_options;
- int ret;
opts->port = P9_PORT;
opts->rfd = ~0;
@@ -744,7 +743,6 @@
if (r < 0) {
P9_DPRINTK(P9_DEBUG_ERROR,
"integer field, but no integer?\n");
- ret = r;
continue;
}
}
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 150e0c4..844a7a5 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -167,7 +167,6 @@
substring_t args[MAX_OPT_ARGS];
int option;
char *options, *tmp_options;
- int ret;
opts->port = P9_PORT;
opts->sq_depth = P9_RDMA_SQ_DEPTH;
@@ -195,7 +194,6 @@
if (r < 0) {
P9_DPRINTK(P9_DEBUG_ERROR,
"integer field, but no integer?\n");
- ret = r;
continue;
}
switch (token) {
diff --git a/net/Kconfig b/net/Kconfig
index 79cabf1..878151c 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -232,6 +232,20 @@
depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS
default y
+config HAVE_BPF_JIT
+ bool
+
+config BPF_JIT
+ bool "enable BPF Just In Time compiler"
+ depends on HAVE_BPF_JIT
+ depends on MODULES
+ ---help---
+ Berkeley Packet Filter filtering capabilities are normally handled
+ by an interpreter. This option allows kernel to generate a native
+ code when filter is loaded in memory. This should speedup
+ packet sniffing (libpcap/tcpdump). Note : Admin should enable
+ this feature changing /proc/sys/net/core/bpf_jit_enable
+
menu "Network testing"
config NET_PKTGEN
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 38754fd..25073b6 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -129,7 +129,6 @@
#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
static void lec_handle_bridge(struct sk_buff *skb, struct net_device *dev)
{
- struct ethhdr *eth;
char *buff;
struct lec_priv *priv;
@@ -138,7 +137,6 @@
* LE_TOPOLOGY_REQUEST with the same value of Topology Change bit
* as the Config BPDU has
*/
- eth = (struct ethhdr *)skb->data;
buff = skb->data + skb->dev->hard_header_len;
if (*buff++ == 0x42 && *buff++ == 0x42 && *buff++ == 0x03) {
struct sock *sk;
@@ -1180,7 +1178,6 @@
static void __exit lane_module_cleanup(void)
{
int i;
- struct lec_priv *priv;
remove_proc_entry("lec", atm_proc_root);
@@ -1188,7 +1185,6 @@
for (i = 0; i < MAX_LEC_ITF; i++) {
if (dev_lec[i] != NULL) {
- priv = netdev_priv(dev_lec[i]);
unregister_netdev(dev_lec[i]);
free_netdev(dev_lec[i]);
dev_lec[i] = NULL;
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 6da5dae..e7c69f4 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1538,8 +1538,6 @@
}
/* Build a packet */
- SOCK_DEBUG(sk, "AX.25: sendto: Addresses built. Building packet.\n");
-
/* Assume the worst case */
size = len + ax25->ax25_dev->dev->hard_header_len;
@@ -1549,8 +1547,6 @@
skb_reserve(skb, size - len);
- SOCK_DEBUG(sk, "AX.25: Appending user data\n");
-
/* User data follows immediately after the AX.25 data */
if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
err = -EFAULT;
@@ -1564,8 +1560,6 @@
if (!ax25->pidincl)
*skb_push(skb, 1) = sk->sk_protocol;
- SOCK_DEBUG(sk, "AX.25: Transmitting buffer\n");
-
if (sk->sk_type == SOCK_SEQPACKET) {
/* Connected mode sockets go via the LAPB machine */
if (sk->sk_state != TCP_ESTABLISHED) {
@@ -1583,22 +1577,14 @@
skb_push(skb, 1 + ax25_addr_size(dp));
- SOCK_DEBUG(sk, "Building AX.25 Header (dp=%p).\n", dp);
-
- if (dp != NULL)
- SOCK_DEBUG(sk, "Num digipeaters=%d\n", dp->ndigi);
+ /* Building AX.25 Header */
/* Build an AX.25 header */
lv = ax25_addr_build(skb->data, &ax25->source_addr, &sax.sax25_call,
dp, AX25_COMMAND, AX25_MODULUS);
- SOCK_DEBUG(sk, "Built header (%d bytes)\n",lv);
-
skb_set_transport_header(skb, lv);
- SOCK_DEBUG(sk, "base=%p pos=%p\n",
- skb->data, skb_transport_header(skb));
-
*skb_transport_header(skb) = AX25_UI;
/* Datagram frames go straight out of the door as UI */
diff --git a/net/ax25/ax25_iface.c b/net/ax25/ax25_iface.c
index 5a0dda8..60b545e 100644
--- a/net/ax25/ax25_iface.c
+++ b/net/ax25/ax25_iface.c
@@ -58,7 +58,7 @@
void ax25_protocol_release(unsigned int pid)
{
- struct ax25_protocol *s, *protocol;
+ struct ax25_protocol *protocol;
write_lock_bh(&protocol_list_lock);
protocol = protocol_list;
@@ -72,7 +72,6 @@
while (protocol != NULL && protocol->next != NULL) {
if (protocol->next->pid == pid) {
- s = protocol->next;
protocol->next = protocol->next->next;
goto out;
}
diff --git a/net/batman-adv/aggregation.c b/net/batman-adv/aggregation.c
index af45d6b..a8c3203 100644
--- a/net/batman-adv/aggregation.c
+++ b/net/batman-adv/aggregation.c
@@ -23,11 +23,12 @@
#include "aggregation.h"
#include "send.h"
#include "routing.h"
+#include "hard-interface.h"
-/* calculate the size of the hna information for a given packet */
-static int hna_len(struct batman_packet *batman_packet)
+/* calculate the size of the tt information for a given packet */
+static int tt_len(struct batman_packet *batman_packet)
{
- return batman_packet->num_hna * ETH_ALEN;
+ return batman_packet->num_tt * ETH_ALEN;
}
/* return true if new_packet can be aggregated with forw_packet */
@@ -95,7 +96,6 @@
return false;
}
-#define atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
/* create a new aggregated packet and add this packet to it */
static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
unsigned long send_time, bool direct_link,
@@ -106,12 +106,15 @@
struct forw_packet *forw_packet_aggr;
unsigned char *skb_buff;
+ if (!atomic_inc_not_zero(&if_incoming->refcount))
+ return;
+
/* own packet should always be scheduled */
if (!own_packet) {
if (!atomic_dec_not_zero(&bat_priv->batman_queue_left)) {
bat_dbg(DBG_BATMAN, bat_priv,
"batman packet queue full\n");
- return;
+ goto out;
}
}
@@ -119,7 +122,7 @@
if (!forw_packet_aggr) {
if (!own_packet)
atomic_inc(&bat_priv->batman_queue_left);
- return;
+ goto out;
}
if ((atomic_read(&bat_priv->aggregated_ogms)) &&
@@ -134,7 +137,7 @@
if (!own_packet)
atomic_inc(&bat_priv->batman_queue_left);
kfree(forw_packet_aggr);
- return;
+ goto out;
}
skb_reserve(forw_packet_aggr->skb, sizeof(struct ethhdr));
@@ -165,6 +168,10 @@
queue_delayed_work(bat_event_workqueue,
&forw_packet_aggr->delayed_work,
send_time - jiffies);
+
+ return;
+out:
+ hardif_free_ref(if_incoming);
}
/* aggregate a new packet into the existing aggregation */
@@ -251,7 +258,7 @@
{
struct batman_packet *batman_packet;
int buff_pos = 0;
- unsigned char *hna_buff;
+ unsigned char *tt_buff;
batman_packet = (struct batman_packet *)packet_buff;
@@ -260,14 +267,14 @@
orig_interval. */
batman_packet->seqno = ntohl(batman_packet->seqno);
- hna_buff = packet_buff + buff_pos + BAT_PACKET_LEN;
+ tt_buff = packet_buff + buff_pos + BAT_PACKET_LEN;
receive_bat_packet(ethhdr, batman_packet,
- hna_buff, hna_len(batman_packet),
+ tt_buff, tt_len(batman_packet),
if_incoming);
- buff_pos += BAT_PACKET_LEN + hna_len(batman_packet);
+ buff_pos += BAT_PACKET_LEN + tt_len(batman_packet);
batman_packet = (struct batman_packet *)
(packet_buff + buff_pos);
} while (aggregated_packet(buff_pos, packet_len,
- batman_packet->num_hna));
+ batman_packet->num_tt));
}
diff --git a/net/batman-adv/aggregation.h b/net/batman-adv/aggregation.h
index 0622042..7e6d72f 100644
--- a/net/batman-adv/aggregation.h
+++ b/net/batman-adv/aggregation.h
@@ -25,9 +25,9 @@
#include "main.h"
/* is there another aggregated packet here? */
-static inline int aggregated_packet(int buff_pos, int packet_len, int num_hna)
+static inline int aggregated_packet(int buff_pos, int packet_len, int num_tt)
{
- int next_buff_pos = buff_pos + BAT_PACKET_LEN + (num_hna * ETH_ALEN);
+ int next_buff_pos = buff_pos + BAT_PACKET_LEN + (num_tt * ETH_ALEN);
return (next_buff_pos <= packet_len) &&
(next_buff_pos <= MAX_AGGREGATION_BYTES);
diff --git a/net/batman-adv/bat_debugfs.c b/net/batman-adv/bat_debugfs.c
index 0e9d435..abaeec5 100644
--- a/net/batman-adv/bat_debugfs.c
+++ b/net/batman-adv/bat_debugfs.c
@@ -241,13 +241,13 @@
static int transtable_global_open(struct inode *inode, struct file *file)
{
struct net_device *net_dev = (struct net_device *)inode->i_private;
- return single_open(file, hna_global_seq_print_text, net_dev);
+ return single_open(file, tt_global_seq_print_text, net_dev);
}
static int transtable_local_open(struct inode *inode, struct file *file)
{
struct net_device *net_dev = (struct net_device *)inode->i_private;
- return single_open(file, hna_local_seq_print_text, net_dev);
+ return single_open(file, tt_local_seq_print_text, net_dev);
}
static int vis_data_open(struct inode *inode, struct file *file)
diff --git a/net/batman-adv/bat_sysfs.c b/net/batman-adv/bat_sysfs.c
index e449bf6..497a070 100644
--- a/net/batman-adv/bat_sysfs.c
+++ b/net/batman-adv/bat_sysfs.c
@@ -488,22 +488,24 @@
(strncmp(hard_iface->soft_iface->name, buff, IFNAMSIZ) == 0))
goto out;
- if (status_tmp == IF_NOT_IN_USE) {
- rtnl_lock();
- hardif_disable_interface(hard_iface);
- rtnl_unlock();
+ if (!rtnl_trylock()) {
+ ret = -ERESTARTSYS;
goto out;
}
- /* if the interface already is in use */
- if (hard_iface->if_status != IF_NOT_IN_USE) {
- rtnl_lock();
+ if (status_tmp == IF_NOT_IN_USE) {
hardif_disable_interface(hard_iface);
- rtnl_unlock();
+ goto unlock;
}
+ /* if the interface already is in use */
+ if (hard_iface->if_status != IF_NOT_IN_USE)
+ hardif_disable_interface(hard_iface);
+
ret = hardif_enable_interface(hard_iface, buff);
+unlock:
+ rtnl_unlock();
out:
hardif_free_ref(hard_iface);
return ret;
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
index 3cc4355..61605a0 100644
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -23,80 +23,88 @@
#include "gateway_client.h"
#include "gateway_common.h"
#include "hard-interface.h"
+#include "originator.h"
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/udp.h>
#include <linux/if_vlan.h>
-static void gw_node_free_rcu(struct rcu_head *rcu)
-{
- struct gw_node *gw_node;
-
- gw_node = container_of(rcu, struct gw_node, rcu);
- kfree(gw_node);
-}
-
static void gw_node_free_ref(struct gw_node *gw_node)
{
if (atomic_dec_and_test(&gw_node->refcount))
- call_rcu(&gw_node->rcu, gw_node_free_rcu);
+ kfree_rcu(gw_node, rcu);
}
-void *gw_get_selected(struct bat_priv *bat_priv)
+static struct gw_node *gw_get_selected_gw_node(struct bat_priv *bat_priv)
{
- struct gw_node *curr_gateway_tmp;
- struct orig_node *orig_node = NULL;
+ struct gw_node *gw_node;
rcu_read_lock();
- curr_gateway_tmp = rcu_dereference(bat_priv->curr_gw);
- if (!curr_gateway_tmp)
+ gw_node = rcu_dereference(bat_priv->curr_gw);
+ if (!gw_node)
goto out;
- orig_node = curr_gateway_tmp->orig_node;
- if (!orig_node)
+ if (!atomic_inc_not_zero(&gw_node->refcount))
+ gw_node = NULL;
+
+out:
+ rcu_read_unlock();
+ return gw_node;
+}
+
+struct orig_node *gw_get_selected_orig(struct bat_priv *bat_priv)
+{
+ struct gw_node *gw_node;
+ struct orig_node *orig_node = NULL;
+
+ gw_node = gw_get_selected_gw_node(bat_priv);
+ if (!gw_node)
goto out;
+ rcu_read_lock();
+ orig_node = gw_node->orig_node;
+ if (!orig_node)
+ goto unlock;
+
if (!atomic_inc_not_zero(&orig_node->refcount))
orig_node = NULL;
-out:
+unlock:
rcu_read_unlock();
- return orig_node;
-}
-
-void gw_deselect(struct bat_priv *bat_priv)
-{
- struct gw_node *gw_node;
-
- spin_lock_bh(&bat_priv->gw_list_lock);
- gw_node = rcu_dereference(bat_priv->curr_gw);
- rcu_assign_pointer(bat_priv->curr_gw, NULL);
- spin_unlock_bh(&bat_priv->gw_list_lock);
-
+out:
if (gw_node)
gw_node_free_ref(gw_node);
+ return orig_node;
}
static void gw_select(struct bat_priv *bat_priv, struct gw_node *new_gw_node)
{
struct gw_node *curr_gw_node;
+ spin_lock_bh(&bat_priv->gw_list_lock);
+
if (new_gw_node && !atomic_inc_not_zero(&new_gw_node->refcount))
new_gw_node = NULL;
- spin_lock_bh(&bat_priv->gw_list_lock);
- curr_gw_node = rcu_dereference(bat_priv->curr_gw);
+ curr_gw_node = bat_priv->curr_gw;
rcu_assign_pointer(bat_priv->curr_gw, new_gw_node);
- spin_unlock_bh(&bat_priv->gw_list_lock);
if (curr_gw_node)
gw_node_free_ref(curr_gw_node);
+
+ spin_unlock_bh(&bat_priv->gw_list_lock);
+}
+
+void gw_deselect(struct bat_priv *bat_priv)
+{
+ gw_select(bat_priv, NULL);
}
void gw_election(struct bat_priv *bat_priv)
{
struct hlist_node *node;
- struct gw_node *gw_node, *curr_gw, *curr_gw_tmp = NULL;
+ struct gw_node *gw_node, *curr_gw = NULL, *curr_gw_tmp = NULL;
+ struct neigh_node *router;
uint8_t max_tq = 0;
uint32_t max_gw_factor = 0, tmp_gw_factor = 0;
int down, up;
@@ -110,32 +118,25 @@
if (atomic_read(&bat_priv->gw_mode) != GW_MODE_CLIENT)
return;
+ curr_gw = gw_get_selected_gw_node(bat_priv);
+ if (curr_gw)
+ goto out;
+
rcu_read_lock();
- curr_gw = rcu_dereference(bat_priv->curr_gw);
- if (curr_gw) {
- rcu_read_unlock();
- return;
- }
-
if (hlist_empty(&bat_priv->gw_list)) {
-
- if (curr_gw) {
- rcu_read_unlock();
- bat_dbg(DBG_BATMAN, bat_priv,
- "Removing selected gateway - "
- "no gateway in range\n");
- gw_deselect(bat_priv);
- } else
- rcu_read_unlock();
-
- return;
+ bat_dbg(DBG_BATMAN, bat_priv,
+ "Removing selected gateway - "
+ "no gateway in range\n");
+ gw_deselect(bat_priv);
+ goto unlock;
}
hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
- if (!gw_node->orig_node->router)
+ if (gw_node->deleted)
continue;
- if (gw_node->deleted)
+ router = orig_node_get_router(gw_node->orig_node);
+ if (!router)
continue;
switch (atomic_read(&bat_priv->gw_sel_class)) {
@@ -143,15 +144,14 @@
gw_bandwidth_to_kbit(gw_node->orig_node->gw_flags,
&down, &up);
- tmp_gw_factor = (gw_node->orig_node->router->tq_avg *
- gw_node->orig_node->router->tq_avg *
+ tmp_gw_factor = (router->tq_avg * router->tq_avg *
down * 100 * 100) /
(TQ_LOCAL_WINDOW_SIZE *
TQ_LOCAL_WINDOW_SIZE * 64);
if ((tmp_gw_factor > max_gw_factor) ||
((tmp_gw_factor == max_gw_factor) &&
- (gw_node->orig_node->router->tq_avg > max_tq)))
+ (router->tq_avg > max_tq)))
curr_gw_tmp = gw_node;
break;
@@ -163,19 +163,25 @@
* soon as a better gateway appears which has
* $routing_class more tq points)
**/
- if (gw_node->orig_node->router->tq_avg > max_tq)
+ if (router->tq_avg > max_tq)
curr_gw_tmp = gw_node;
break;
}
- if (gw_node->orig_node->router->tq_avg > max_tq)
- max_tq = gw_node->orig_node->router->tq_avg;
+ if (router->tq_avg > max_tq)
+ max_tq = router->tq_avg;
if (tmp_gw_factor > max_gw_factor)
max_gw_factor = tmp_gw_factor;
+
+ neigh_node_free_ref(router);
}
if (curr_gw != curr_gw_tmp) {
+ router = orig_node_get_router(curr_gw_tmp->orig_node);
+ if (!router)
+ goto unlock;
+
if ((curr_gw) && (!curr_gw_tmp))
bat_dbg(DBG_BATMAN, bat_priv,
"Removing selected gateway - "
@@ -186,48 +192,50 @@
"(gw_flags: %i, tq: %i)\n",
curr_gw_tmp->orig_node->orig,
curr_gw_tmp->orig_node->gw_flags,
- curr_gw_tmp->orig_node->router->tq_avg);
+ router->tq_avg);
else
bat_dbg(DBG_BATMAN, bat_priv,
"Changing route to gateway %pM "
"(gw_flags: %i, tq: %i)\n",
curr_gw_tmp->orig_node->orig,
curr_gw_tmp->orig_node->gw_flags,
- curr_gw_tmp->orig_node->router->tq_avg);
+ router->tq_avg);
+ neigh_node_free_ref(router);
gw_select(bat_priv, curr_gw_tmp);
}
+unlock:
rcu_read_unlock();
+out:
+ if (curr_gw)
+ gw_node_free_ref(curr_gw);
}
void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node)
{
- struct gw_node *curr_gateway_tmp;
+ struct orig_node *curr_gw_orig;
+ struct neigh_node *router_gw = NULL, *router_orig = NULL;
uint8_t gw_tq_avg, orig_tq_avg;
- rcu_read_lock();
- curr_gateway_tmp = rcu_dereference(bat_priv->curr_gw);
- if (!curr_gateway_tmp)
- goto out_rcu;
+ curr_gw_orig = gw_get_selected_orig(bat_priv);
+ if (!curr_gw_orig)
+ goto deselect;
- if (!curr_gateway_tmp->orig_node)
- goto deselect_rcu;
-
- if (!curr_gateway_tmp->orig_node->router)
- goto deselect_rcu;
+ router_gw = orig_node_get_router(curr_gw_orig);
+ if (!router_gw)
+ goto deselect;
/* this node already is the gateway */
- if (curr_gateway_tmp->orig_node == orig_node)
- goto out_rcu;
+ if (curr_gw_orig == orig_node)
+ goto out;
- if (!orig_node->router)
- goto out_rcu;
+ router_orig = orig_node_get_router(orig_node);
+ if (!router_orig)
+ goto out;
- gw_tq_avg = curr_gateway_tmp->orig_node->router->tq_avg;
- rcu_read_unlock();
-
- orig_tq_avg = orig_node->router->tq_avg;
+ gw_tq_avg = router_gw->tq_avg;
+ orig_tq_avg = router_orig->tq_avg;
/* the TQ value has to be better */
if (orig_tq_avg < gw_tq_avg)
@@ -245,16 +253,17 @@
"Restarting gateway selection: better gateway found (tq curr: "
"%i, tq new: %i)\n",
gw_tq_avg, orig_tq_avg);
- goto deselect;
-out_rcu:
- rcu_read_unlock();
- goto out;
-deselect_rcu:
- rcu_read_unlock();
deselect:
gw_deselect(bat_priv);
out:
+ if (curr_gw_orig)
+ orig_node_free_ref(curr_gw_orig);
+ if (router_gw)
+ neigh_node_free_ref(router_gw);
+ if (router_orig)
+ neigh_node_free_ref(router_orig);
+
return;
}
@@ -291,7 +300,15 @@
struct orig_node *orig_node, uint8_t new_gwflags)
{
struct hlist_node *node;
- struct gw_node *gw_node;
+ struct gw_node *gw_node, *curr_gw;
+
+ /**
+ * Note: We don't need a NULL check here, since curr_gw never gets
+ * dereferenced. If curr_gw is NULL we also should not exit as we may
+ * have this gateway in our list (duplication check!) even though we
+ * have no currently selected gateway.
+ */
+ curr_gw = gw_get_selected_gw_node(bat_priv);
rcu_read_lock();
hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
@@ -312,22 +329,26 @@
"Gateway %pM removed from gateway list\n",
orig_node->orig);
- if (gw_node == rcu_dereference(bat_priv->curr_gw)) {
- rcu_read_unlock();
- gw_deselect(bat_priv);
- return;
- }
+ if (gw_node == curr_gw)
+ goto deselect;
}
- rcu_read_unlock();
- return;
+ goto unlock;
}
- rcu_read_unlock();
if (new_gwflags == 0)
- return;
+ goto unlock;
gw_node_add(bat_priv, orig_node, new_gwflags);
+ goto unlock;
+
+deselect:
+ gw_deselect(bat_priv);
+unlock:
+ rcu_read_unlock();
+
+ if (curr_gw)
+ gw_node_free_ref(curr_gw);
}
void gw_node_delete(struct bat_priv *bat_priv, struct orig_node *orig_node)
@@ -337,9 +358,12 @@
void gw_node_purge(struct bat_priv *bat_priv)
{
- struct gw_node *gw_node;
+ struct gw_node *gw_node, *curr_gw;
struct hlist_node *node, *node_tmp;
unsigned long timeout = 2 * PURGE_TIMEOUT * HZ;
+ char do_deselect = 0;
+
+ curr_gw = gw_get_selected_gw_node(bat_priv);
spin_lock_bh(&bat_priv->gw_list_lock);
@@ -350,41 +374,56 @@
atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE)
continue;
- if (rcu_dereference(bat_priv->curr_gw) == gw_node)
- gw_deselect(bat_priv);
+ if (curr_gw == gw_node)
+ do_deselect = 1;
hlist_del_rcu(&gw_node->list);
gw_node_free_ref(gw_node);
}
-
spin_unlock_bh(&bat_priv->gw_list_lock);
+
+ /* gw_deselect() needs to acquire the gw_list_lock */
+ if (do_deselect)
+ gw_deselect(bat_priv);
+
+ if (curr_gw)
+ gw_node_free_ref(curr_gw);
}
+/**
+ * fails if orig_node has no router
+ */
static int _write_buffer_text(struct bat_priv *bat_priv,
struct seq_file *seq, struct gw_node *gw_node)
{
struct gw_node *curr_gw;
- int down, up, ret;
+ struct neigh_node *router;
+ int down, up, ret = -1;
gw_bandwidth_to_kbit(gw_node->orig_node->gw_flags, &down, &up);
- rcu_read_lock();
- curr_gw = rcu_dereference(bat_priv->curr_gw);
+ router = orig_node_get_router(gw_node->orig_node);
+ if (!router)
+ goto out;
+
+ curr_gw = gw_get_selected_gw_node(bat_priv);
ret = seq_printf(seq, "%s %pM (%3i) %pM [%10s]: %3i - %i%s/%i%s\n",
- (curr_gw == gw_node ? "=>" : " "),
- gw_node->orig_node->orig,
- gw_node->orig_node->router->tq_avg,
- gw_node->orig_node->router->addr,
- gw_node->orig_node->router->if_incoming->net_dev->name,
- gw_node->orig_node->gw_flags,
- (down > 2048 ? down / 1024 : down),
- (down > 2048 ? "MBit" : "KBit"),
- (up > 2048 ? up / 1024 : up),
- (up > 2048 ? "MBit" : "KBit"));
+ (curr_gw == gw_node ? "=>" : " "),
+ gw_node->orig_node->orig,
+ router->tq_avg, router->addr,
+ router->if_incoming->net_dev->name,
+ gw_node->orig_node->gw_flags,
+ (down > 2048 ? down / 1024 : down),
+ (down > 2048 ? "MBit" : "KBit"),
+ (up > 2048 ? up / 1024 : up),
+ (up > 2048 ? "MBit" : "KBit"));
- rcu_read_unlock();
+ neigh_node_free_ref(router);
+ if (curr_gw)
+ gw_node_free_ref(curr_gw);
+out:
return ret;
}
@@ -392,40 +431,42 @@
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct bat_priv *bat_priv = netdev_priv(net_dev);
+ struct hard_iface *primary_if;
struct gw_node *gw_node;
struct hlist_node *node;
- int gw_count = 0;
+ int gw_count = 0, ret = 0;
- if (!bat_priv->primary_if) {
-
- return seq_printf(seq, "BATMAN mesh %s disabled - please "
- "specify interfaces to enable it\n",
- net_dev->name);
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - please "
+ "specify interfaces to enable it\n",
+ net_dev->name);
+ goto out;
}
- if (bat_priv->primary_if->if_status != IF_ACTIVE) {
-
- return seq_printf(seq, "BATMAN mesh %s disabled - "
- "primary interface not active\n",
- net_dev->name);
+ if (primary_if->if_status != IF_ACTIVE) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+ "primary interface not active\n",
+ net_dev->name);
+ goto out;
}
seq_printf(seq, " %-12s (%s/%i) %17s [%10s]: gw_class ... "
"[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%pM (%s)]\n",
"Gateway", "#", TQ_MAX_VALUE, "Nexthop",
"outgoingIF", SOURCE_VERSION, REVISION_VERSION_STR,
- bat_priv->primary_if->net_dev->name,
- bat_priv->primary_if->net_dev->dev_addr, net_dev->name);
+ primary_if->net_dev->name,
+ primary_if->net_dev->dev_addr, net_dev->name);
rcu_read_lock();
hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
if (gw_node->deleted)
continue;
- if (!gw_node->orig_node->router)
+ /* fails if orig_node has no router */
+ if (_write_buffer_text(bat_priv, seq, gw_node) < 0)
continue;
- _write_buffer_text(bat_priv, seq, gw_node);
gw_count++;
}
rcu_read_unlock();
@@ -433,7 +474,10 @@
if (gw_count == 0)
seq_printf(seq, "No gateways in range ...\n");
- return 0;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
}
int gw_is_target(struct bat_priv *bat_priv, struct sk_buff *skb)
@@ -442,6 +486,7 @@
struct iphdr *iphdr;
struct ipv6hdr *ipv6hdr;
struct udphdr *udphdr;
+ struct gw_node *curr_gw;
unsigned int header_len = 0;
if (atomic_read(&bat_priv->gw_mode) == GW_MODE_OFF)
@@ -506,12 +551,11 @@
if (atomic_read(&bat_priv->gw_mode) == GW_MODE_SERVER)
return -1;
- rcu_read_lock();
- if (!rcu_dereference(bat_priv->curr_gw)) {
- rcu_read_unlock();
+ curr_gw = gw_get_selected_gw_node(bat_priv);
+ if (!curr_gw)
return 0;
- }
- rcu_read_unlock();
+ if (curr_gw)
+ gw_node_free_ref(curr_gw);
return 1;
}
diff --git a/net/batman-adv/gateway_client.h b/net/batman-adv/gateway_client.h
index 2aa4391..1ce8c60 100644
--- a/net/batman-adv/gateway_client.h
+++ b/net/batman-adv/gateway_client.h
@@ -24,7 +24,7 @@
void gw_deselect(struct bat_priv *bat_priv);
void gw_election(struct bat_priv *bat_priv);
-void *gw_get_selected(struct bat_priv *bat_priv);
+struct orig_node *gw_get_selected_orig(struct bat_priv *bat_priv);
void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node);
void gw_node_update(struct bat_priv *bat_priv,
struct orig_node *orig_node, uint8_t new_gwflags);
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index b3058e4..dfbfccc 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -31,9 +31,6 @@
#include <linux/if_arp.h>
-/* protect update critical side of hardif_list - but not the content */
-static DEFINE_SPINLOCK(hardif_list_lock);
-
static int batman_skb_recv(struct sk_buff *skb,
struct net_device *dev,
@@ -110,47 +107,57 @@
return hard_iface;
}
-static void update_primary_addr(struct bat_priv *bat_priv)
+static void primary_if_update_addr(struct bat_priv *bat_priv)
{
struct vis_packet *vis_packet;
+ struct hard_iface *primary_if;
+
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ goto out;
vis_packet = (struct vis_packet *)
bat_priv->my_vis_info->skb_packet->data;
- memcpy(vis_packet->vis_orig,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ memcpy(vis_packet->vis_orig, primary_if->net_dev->dev_addr, ETH_ALEN);
memcpy(vis_packet->sender_orig,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ primary_if->net_dev->dev_addr, ETH_ALEN);
+
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
}
-static void set_primary_if(struct bat_priv *bat_priv,
- struct hard_iface *hard_iface)
+static void primary_if_select(struct bat_priv *bat_priv,
+ struct hard_iface *new_hard_iface)
{
+ struct hard_iface *curr_hard_iface;
struct batman_packet *batman_packet;
- struct hard_iface *old_if;
- if (hard_iface && !atomic_inc_not_zero(&hard_iface->refcount))
- hard_iface = NULL;
+ ASSERT_RTNL();
- old_if = bat_priv->primary_if;
- bat_priv->primary_if = hard_iface;
+ if (new_hard_iface && !atomic_inc_not_zero(&new_hard_iface->refcount))
+ new_hard_iface = NULL;
- if (old_if)
- hardif_free_ref(old_if);
+ curr_hard_iface = bat_priv->primary_if;
+ rcu_assign_pointer(bat_priv->primary_if, new_hard_iface);
- if (!bat_priv->primary_if)
+ if (curr_hard_iface)
+ hardif_free_ref(curr_hard_iface);
+
+ if (!new_hard_iface)
return;
- batman_packet = (struct batman_packet *)(hard_iface->packet_buff);
+ batman_packet = (struct batman_packet *)(new_hard_iface->packet_buff);
batman_packet->flags = PRIMARIES_FIRST_HOP;
batman_packet->ttl = TTL;
- update_primary_addr(bat_priv);
+ primary_if_update_addr(bat_priv);
/***
- * hacky trick to make sure that we send the HNA information via
+ * hacky trick to make sure that we send the TT information via
* our new primary interface
*/
- atomic_set(&bat_priv->hna_local_changed, 1);
+ atomic_set(&bat_priv->tt_local_changed, 1);
}
static bool hardif_is_iface_up(struct hard_iface *hard_iface)
@@ -236,9 +243,10 @@
static void hardif_activate_interface(struct hard_iface *hard_iface)
{
struct bat_priv *bat_priv;
+ struct hard_iface *primary_if = NULL;
if (hard_iface->if_status != IF_INACTIVE)
- return;
+ goto out;
bat_priv = netdev_priv(hard_iface->soft_iface);
@@ -249,14 +257,18 @@
* the first active interface becomes our primary interface or
* the next active interface after the old primay interface was removed
*/
- if (!bat_priv->primary_if)
- set_primary_if(bat_priv, hard_iface);
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ primary_if_select(bat_priv, hard_iface);
bat_info(hard_iface->soft_iface, "Interface activated: %s\n",
hard_iface->net_dev->name);
update_min_mtu(hard_iface->soft_iface);
- return;
+
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
}
static void hardif_deactivate_interface(struct hard_iface *hard_iface)
@@ -327,7 +339,7 @@
batman_packet->flags = 0;
batman_packet->ttl = 2;
batman_packet->tq = TQ_MAX_VALUE;
- batman_packet->num_hna = 0;
+ batman_packet->num_tt = 0;
hard_iface->if_num = bat_priv->num_ifaces;
bat_priv->num_ifaces++;
@@ -386,12 +398,13 @@
void hardif_disable_interface(struct hard_iface *hard_iface)
{
struct bat_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
+ struct hard_iface *primary_if = NULL;
if (hard_iface->if_status == IF_ACTIVE)
hardif_deactivate_interface(hard_iface);
if (hard_iface->if_status != IF_INACTIVE)
- return;
+ goto out;
bat_info(hard_iface->soft_iface, "Removing interface: %s\n",
hard_iface->net_dev->name);
@@ -400,11 +413,12 @@
bat_priv->num_ifaces--;
orig_hash_del_if(hard_iface, bat_priv->num_ifaces);
- if (hard_iface == bat_priv->primary_if) {
+ primary_if = primary_if_get_selected(bat_priv);
+ if (hard_iface == primary_if) {
struct hard_iface *new_if;
new_if = hardif_get_active(hard_iface->soft_iface);
- set_primary_if(bat_priv, new_if);
+ primary_if_select(bat_priv, new_if);
if (new_if)
hardif_free_ref(new_if);
@@ -425,6 +439,10 @@
hard_iface->soft_iface = NULL;
hardif_free_ref(hard_iface);
+
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
}
static struct hard_iface *hardif_add_interface(struct net_device *net_dev)
@@ -432,6 +450,8 @@
struct hard_iface *hard_iface;
int ret;
+ ASSERT_RTNL();
+
ret = is_valid_iface(net_dev);
if (ret != 1)
goto out;
@@ -458,10 +478,7 @@
atomic_set(&hard_iface->refcount, 2);
check_known_mac_addr(hard_iface->net_dev);
-
- spin_lock(&hardif_list_lock);
list_add_tail_rcu(&hard_iface->list, &hardif_list);
- spin_unlock(&hardif_list_lock);
return hard_iface;
@@ -475,6 +492,8 @@
static void hardif_remove_interface(struct hard_iface *hard_iface)
{
+ ASSERT_RTNL();
+
/* first deactivate interface */
if (hard_iface->if_status != IF_NOT_IN_USE)
hardif_disable_interface(hard_iface);
@@ -490,20 +509,11 @@
void hardif_remove_interfaces(void)
{
struct hard_iface *hard_iface, *hard_iface_tmp;
- struct list_head if_queue;
- INIT_LIST_HEAD(&if_queue);
-
- spin_lock(&hardif_list_lock);
+ rtnl_lock();
list_for_each_entry_safe(hard_iface, hard_iface_tmp,
&hardif_list, list) {
list_del_rcu(&hard_iface->list);
- list_add_tail(&hard_iface->list, &if_queue);
- }
- spin_unlock(&hardif_list_lock);
-
- rtnl_lock();
- list_for_each_entry_safe(hard_iface, hard_iface_tmp, &if_queue, list) {
hardif_remove_interface(hard_iface);
}
rtnl_unlock();
@@ -514,6 +524,7 @@
{
struct net_device *net_dev = (struct net_device *)ptr;
struct hard_iface *hard_iface = hardif_get_by_netdev(net_dev);
+ struct hard_iface *primary_if = NULL;
struct bat_priv *bat_priv;
if (!hard_iface && event == NETDEV_REGISTER)
@@ -531,9 +542,7 @@
hardif_deactivate_interface(hard_iface);
break;
case NETDEV_UNREGISTER:
- spin_lock(&hardif_list_lock);
list_del_rcu(&hard_iface->list);
- spin_unlock(&hardif_list_lock);
hardif_remove_interface(hard_iface);
break;
@@ -549,8 +558,12 @@
update_mac_addresses(hard_iface);
bat_priv = netdev_priv(hard_iface->soft_iface);
- if (hard_iface == bat_priv->primary_if)
- update_primary_addr(bat_priv);
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ goto hardif_put;
+
+ if (hard_iface == primary_if)
+ primary_if_update_addr(bat_priv);
break;
default:
break;
@@ -559,6 +572,8 @@
hardif_put:
hardif_free_ref(hard_iface);
out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
return NOTIFY_DONE;
}
diff --git a/net/batman-adv/hard-interface.h b/net/batman-adv/hard-interface.h
index a9ddf36..6426599 100644
--- a/net/batman-adv/hard-interface.h
+++ b/net/batman-adv/hard-interface.h
@@ -45,4 +45,22 @@
call_rcu(&hard_iface->rcu, hardif_free_rcu);
}
+static inline struct hard_iface *primary_if_get_selected(
+ struct bat_priv *bat_priv)
+{
+ struct hard_iface *hard_iface;
+
+ rcu_read_lock();
+ hard_iface = rcu_dereference(bat_priv->primary_if);
+ if (!hard_iface)
+ goto out;
+
+ if (!atomic_inc_not_zero(&hard_iface->refcount))
+ hard_iface = NULL;
+
+out:
+ rcu_read_unlock();
+ return hard_iface;
+}
+
#endif /* _NET_BATMAN_ADV_HARD_INTERFACE_H_ */
diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c
index 34ce56c..fa22ba2 100644
--- a/net/batman-adv/icmp_socket.c
+++ b/net/batman-adv/icmp_socket.c
@@ -153,6 +153,7 @@
{
struct socket_client *socket_client = file->private_data;
struct bat_priv *bat_priv = socket_client->bat_priv;
+ struct hard_iface *primary_if = NULL;
struct sk_buff *skb;
struct icmp_packet_rr *icmp_packet;
@@ -167,15 +168,21 @@
return -EINVAL;
}
- if (!bat_priv->primary_if)
- return -EFAULT;
+ primary_if = primary_if_get_selected(bat_priv);
+
+ if (!primary_if) {
+ len = -EFAULT;
+ goto out;
+ }
if (len >= sizeof(struct icmp_packet_rr))
packet_len = sizeof(struct icmp_packet_rr);
skb = dev_alloc_skb(packet_len + sizeof(struct ethhdr));
- if (!skb)
- return -ENOMEM;
+ if (!skb) {
+ len = -ENOMEM;
+ goto out;
+ }
skb_reserve(skb, sizeof(struct ethhdr));
icmp_packet = (struct icmp_packet_rr *)skb_put(skb, packet_len);
@@ -218,23 +225,13 @@
if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
goto dst_unreach;
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, icmp_packet->dst);
-
if (!orig_node)
- goto unlock;
+ goto dst_unreach;
- neigh_node = orig_node->router;
-
+ neigh_node = orig_node_get_router(orig_node);
if (!neigh_node)
- goto unlock;
-
- if (!atomic_inc_not_zero(&neigh_node->refcount)) {
- neigh_node = NULL;
- goto unlock;
- }
-
- rcu_read_unlock();
+ goto dst_unreach;
if (!neigh_node->if_incoming)
goto dst_unreach;
@@ -243,7 +240,7 @@
goto dst_unreach;
memcpy(icmp_packet->orig,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ primary_if->net_dev->dev_addr, ETH_ALEN);
if (packet_len == sizeof(struct icmp_packet_rr))
memcpy(icmp_packet->rr,
@@ -252,14 +249,14 @@
send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
goto out;
-unlock:
- rcu_read_unlock();
dst_unreach:
icmp_packet->msg_type = DESTINATION_UNREACHABLE;
bat_socket_add_packet(socket_client, icmp_packet, packet_len);
free_skb:
kfree_skb(skb);
out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
if (neigh_node)
neigh_node_free_ref(neigh_node);
if (orig_node)
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index 709b33b..0a7cee0 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -33,6 +33,9 @@
#include "vis.h"
#include "hash.h"
+
+/* List manipulations on hardif_list have to be rtnl_lock()'ed,
+ * list traversals just rcu-locked */
struct list_head hardif_list;
unsigned char broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
@@ -81,28 +84,29 @@
spin_lock_init(&bat_priv->forw_bat_list_lock);
spin_lock_init(&bat_priv->forw_bcast_list_lock);
- spin_lock_init(&bat_priv->hna_lhash_lock);
- spin_lock_init(&bat_priv->hna_ghash_lock);
+ spin_lock_init(&bat_priv->tt_lhash_lock);
+ spin_lock_init(&bat_priv->tt_ghash_lock);
spin_lock_init(&bat_priv->gw_list_lock);
spin_lock_init(&bat_priv->vis_hash_lock);
spin_lock_init(&bat_priv->vis_list_lock);
spin_lock_init(&bat_priv->softif_neigh_lock);
+ spin_lock_init(&bat_priv->softif_neigh_vid_lock);
INIT_HLIST_HEAD(&bat_priv->forw_bat_list);
INIT_HLIST_HEAD(&bat_priv->forw_bcast_list);
INIT_HLIST_HEAD(&bat_priv->gw_list);
- INIT_HLIST_HEAD(&bat_priv->softif_neigh_list);
+ INIT_HLIST_HEAD(&bat_priv->softif_neigh_vids);
if (originator_init(bat_priv) < 1)
goto err;
- if (hna_local_init(bat_priv) < 1)
+ if (tt_local_init(bat_priv) < 1)
goto err;
- if (hna_global_init(bat_priv) < 1)
+ if (tt_global_init(bat_priv) < 1)
goto err;
- hna_local_add(soft_iface, soft_iface->dev_addr);
+ tt_local_add(soft_iface, soft_iface->dev_addr);
if (vis_init(bat_priv) < 1)
goto err;
@@ -133,8 +137,8 @@
gw_node_purge(bat_priv);
originator_free(bat_priv);
- hna_local_free(bat_priv);
- hna_global_free(bat_priv);
+ tt_local_free(bat_priv);
+ tt_global_free(bat_priv);
softif_neigh_purge(bat_priv);
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index dc24869..148b49e 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -34,16 +34,18 @@
#define TQ_MAX_VALUE 255
#define JITTER 20
-#define TTL 50 /* Time To Live of broadcast messages */
-#define PURGE_TIMEOUT 200 /* purge originators after time in seconds if no
- * valid packet comes in -> TODO: check
- * influence on TQ_LOCAL_WINDOW_SIZE */
-#define LOCAL_HNA_TIMEOUT 3600 /* in seconds */
+ /* Time To Live of broadcast messages */
+#define TTL 50
-#define TQ_LOCAL_WINDOW_SIZE 64 /* sliding packet range of received originator
- * messages in squence numbers (should be a
- * multiple of our word size) */
+/* purge originators after time in seconds if no valid packet comes in
+ * -> TODO: check influence on TQ_LOCAL_WINDOW_SIZE */
+#define PURGE_TIMEOUT 200
+#define TT_LOCAL_TIMEOUT 3600 /* in seconds */
+
+/* sliding packet range of received originator messages in squence numbers
+ * (should be a multiple of our word size) */
+#define TQ_LOCAL_WINDOW_SIZE 64
#define TQ_GLOBAL_WINDOW_SIZE 5
#define TQ_LOCAL_BIDRECT_SEND_MINIMUM 1
#define TQ_LOCAL_BIDRECT_RECV_MINIMUM 1
@@ -55,21 +57,20 @@
#define VIS_INTERVAL 5000 /* 5 seconds */
-/* how much worse secondary interfaces may be to
- * to be considered as bonding candidates */
-
+/* how much worse secondary interfaces may be to be considered as bonding
+ * candidates */
#define BONDING_TQ_THRESHOLD 50
-#define MAX_AGGREGATION_BYTES 512 /* should not be bigger than 512 bytes or
- * change the size of
- * forw_packet->direct_link_flags */
+/* should not be bigger than 512 bytes or change the size of
+ * forw_packet->direct_link_flags */
+#define MAX_AGGREGATION_BYTES 512
#define MAX_AGGREGATION_MS 100
#define SOFTIF_NEIGH_TIMEOUT 180000 /* 3 minutes */
+/* don't reset again within 30 seconds */
#define RESET_PROTECTION_MS 30000
#define EXPECTED_SEQNO_RANGE 65536
-/* don't reset again within 30 seconds */
#define MESH_INACTIVE 0
#define MESH_ACTIVE 1
@@ -84,12 +85,13 @@
#ifdef pr_fmt
#undef pr_fmt
#endif
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt /* Append 'batman-adv: ' before
- * kernel messages */
+/* Append 'batman-adv: ' before kernel messages */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define DBG_BATMAN 1 /* all messages related to routing / flooding /
- * broadcasting / etc */
-#define DBG_ROUTES 2 /* route or hna added / changed / deleted */
+/* all messages related to routing / flooding / broadcasting / etc */
+#define DBG_BATMAN 1
+/* route or tt entry added / changed / deleted */
+#define DBG_ROUTES 2
#define DBG_ALL 3
@@ -175,4 +177,6 @@
return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
}
+#define atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
+
#endif /* _NET_BATMAN_ADV_MAIN_H_ */
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index 0b91330..40a30bb 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -19,8 +19,6 @@
*
*/
-/* increase the reference counter for this originator */
-
#include "main.h"
#include "originator.h"
#include "hash.h"
@@ -56,18 +54,25 @@
return 0;
}
-static void neigh_node_free_rcu(struct rcu_head *rcu)
-{
- struct neigh_node *neigh_node;
-
- neigh_node = container_of(rcu, struct neigh_node, rcu);
- kfree(neigh_node);
-}
-
void neigh_node_free_ref(struct neigh_node *neigh_node)
{
if (atomic_dec_and_test(&neigh_node->refcount))
- call_rcu(&neigh_node->rcu, neigh_node_free_rcu);
+ kfree_rcu(neigh_node, rcu);
+}
+
+/* increases the refcounter of a found router */
+struct neigh_node *orig_node_get_router(struct orig_node *orig_node)
+{
+ struct neigh_node *router;
+
+ rcu_read_lock();
+ router = rcu_dereference(orig_node->router);
+
+ if (router && !atomic_inc_not_zero(&router->refcount))
+ router = NULL;
+
+ rcu_read_unlock();
+ return router;
}
struct neigh_node *create_neighbor(struct orig_node *orig_node,
@@ -87,6 +92,7 @@
INIT_HLIST_NODE(&neigh_node->list);
INIT_LIST_HEAD(&neigh_node->bonding_list);
+ spin_lock_init(&neigh_node->tq_lock);
memcpy(neigh_node->addr, neigh, ETH_ALEN);
neigh_node->orig_node = orig_neigh_node;
@@ -128,7 +134,7 @@
spin_unlock_bh(&orig_node->neigh_list_lock);
frag_list_free(&orig_node->frag_list);
- hna_global_del_orig(orig_node->bat_priv, orig_node,
+ tt_global_del_orig(orig_node->bat_priv, orig_node,
"originator timed out");
kfree(orig_node->bcast_own);
@@ -206,7 +212,7 @@
orig_node->bat_priv = bat_priv;
memcpy(orig_node->orig, addr, ETH_ALEN);
orig_node->router = NULL;
- orig_node->hna_buff = NULL;
+ orig_node->tt_buff = NULL;
orig_node->bcast_seqno_reset = jiffies - 1
- msecs_to_jiffies(RESET_PROTECTION_MS);
orig_node->batman_seqno_reset = jiffies - 1
@@ -317,8 +323,8 @@
&best_neigh_node)) {
update_routes(bat_priv, orig_node,
best_neigh_node,
- orig_node->hna_buff,
- orig_node->hna_buff_len);
+ orig_node->tt_buff,
+ orig_node->tt_buff_len);
}
}
@@ -389,29 +395,34 @@
struct hashtable_t *hash = bat_priv->orig_hash;
struct hlist_node *node, *node_tmp;
struct hlist_head *head;
+ struct hard_iface *primary_if;
struct orig_node *orig_node;
- struct neigh_node *neigh_node;
+ struct neigh_node *neigh_node, *neigh_node_tmp;
int batman_count = 0;
int last_seen_secs;
int last_seen_msecs;
- int i;
+ int i, ret = 0;
- if ((!bat_priv->primary_if) ||
- (bat_priv->primary_if->if_status != IF_ACTIVE)) {
- if (!bat_priv->primary_if)
- return seq_printf(seq, "BATMAN mesh %s disabled - "
- "please specify interfaces to enable it\n",
- net_dev->name);
+ primary_if = primary_if_get_selected(bat_priv);
- return seq_printf(seq, "BATMAN mesh %s "
- "disabled - primary interface not active\n",
- net_dev->name);
+ if (!primary_if) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+ "please specify interfaces to enable it\n",
+ net_dev->name);
+ goto out;
+ }
+
+ if (primary_if->if_status != IF_ACTIVE) {
+ ret = seq_printf(seq, "BATMAN mesh %s "
+ "disabled - primary interface not active\n",
+ net_dev->name);
+ goto out;
}
seq_printf(seq, "[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%pM (%s)]\n",
SOURCE_VERSION, REVISION_VERSION_STR,
- bat_priv->primary_if->net_dev->name,
- bat_priv->primary_if->net_dev->dev_addr, net_dev->name);
+ primary_if->net_dev->name,
+ primary_if->net_dev->dev_addr, net_dev->name);
seq_printf(seq, " %-15s %s (%s/%i) %17s [%10s]: %20s ...\n",
"Originator", "last-seen", "#", TQ_MAX_VALUE, "Nexthop",
"outgoingIF", "Potential nexthops");
@@ -421,40 +432,47 @@
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
- if (!orig_node->router)
+ neigh_node = orig_node_get_router(orig_node);
+ if (!neigh_node)
continue;
- if (orig_node->router->tq_avg == 0)
- continue;
+ if (neigh_node->tq_avg == 0)
+ goto next;
last_seen_secs = jiffies_to_msecs(jiffies -
orig_node->last_valid) / 1000;
last_seen_msecs = jiffies_to_msecs(jiffies -
orig_node->last_valid) % 1000;
- neigh_node = orig_node->router;
seq_printf(seq, "%pM %4i.%03is (%3i) %pM [%10s]:",
orig_node->orig, last_seen_secs,
last_seen_msecs, neigh_node->tq_avg,
neigh_node->addr,
neigh_node->if_incoming->net_dev->name);
- hlist_for_each_entry_rcu(neigh_node, node_tmp,
+ hlist_for_each_entry_rcu(neigh_node_tmp, node_tmp,
&orig_node->neigh_list, list) {
- seq_printf(seq, " %pM (%3i)", neigh_node->addr,
- neigh_node->tq_avg);
+ seq_printf(seq, " %pM (%3i)",
+ neigh_node_tmp->addr,
+ neigh_node_tmp->tq_avg);
}
seq_printf(seq, "\n");
batman_count++;
+
+next:
+ neigh_node_free_ref(neigh_node);
}
rcu_read_unlock();
}
- if ((batman_count == 0))
+ if (batman_count == 0)
seq_printf(seq, "No batman nodes in range ...\n");
- return 0;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
}
static int orig_node_add_if(struct orig_node *orig_node, int max_if_num)
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h
index 5cc0110..e1d641f 100644
--- a/net/batman-adv/originator.h
+++ b/net/batman-adv/originator.h
@@ -34,6 +34,7 @@
uint8_t *neigh,
struct hard_iface *if_incoming);
void neigh_node_free_ref(struct neigh_node *neigh_node);
+struct neigh_node *orig_node_get_router(struct orig_node *orig_node);
int orig_seq_print_text(struct seq_file *seq, void *offset);
int orig_hash_add_if(struct hard_iface *hard_iface, int max_if_num);
int orig_hash_del_if(struct hard_iface *hard_iface, int max_if_num);
diff --git a/net/batman-adv/packet.h b/net/batman-adv/packet.h
index e757187..eda9965 100644
--- a/net/batman-adv/packet.h
+++ b/net/batman-adv/packet.h
@@ -61,7 +61,7 @@
uint8_t orig[6];
uint8_t prev_sender[6];
uint8_t ttl;
- uint8_t num_hna;
+ uint8_t num_tt;
uint8_t gw_flags; /* flags related to gateway class */
uint8_t align;
} __packed;
@@ -128,8 +128,7 @@
uint8_t entries; /* number of entries behind this struct */
uint32_t seqno; /* sequence number */
uint8_t ttl; /* TTL */
- uint8_t vis_orig[6]; /* originator that informs about its
- * neighbors */
+ uint8_t vis_orig[6]; /* originator that announces its neighbors */
uint8_t target_orig[6]; /* who should receive this packet */
uint8_t sender_orig[6]; /* who sent or rebroadcasted this packet */
} __packed;
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index c172f5d..bb1c3ec 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -64,80 +64,97 @@
}
}
-static void update_HNA(struct bat_priv *bat_priv, struct orig_node *orig_node,
- unsigned char *hna_buff, int hna_buff_len)
+static void update_TT(struct bat_priv *bat_priv, struct orig_node *orig_node,
+ unsigned char *tt_buff, int tt_buff_len)
{
- if ((hna_buff_len != orig_node->hna_buff_len) ||
- ((hna_buff_len > 0) &&
- (orig_node->hna_buff_len > 0) &&
- (memcmp(orig_node->hna_buff, hna_buff, hna_buff_len) != 0))) {
+ if ((tt_buff_len != orig_node->tt_buff_len) ||
+ ((tt_buff_len > 0) &&
+ (orig_node->tt_buff_len > 0) &&
+ (memcmp(orig_node->tt_buff, tt_buff, tt_buff_len) != 0))) {
- if (orig_node->hna_buff_len > 0)
- hna_global_del_orig(bat_priv, orig_node,
- "originator changed hna");
+ if (orig_node->tt_buff_len > 0)
+ tt_global_del_orig(bat_priv, orig_node,
+ "originator changed tt");
- if ((hna_buff_len > 0) && (hna_buff))
- hna_global_add_orig(bat_priv, orig_node,
- hna_buff, hna_buff_len);
+ if ((tt_buff_len > 0) && (tt_buff))
+ tt_global_add_orig(bat_priv, orig_node,
+ tt_buff, tt_buff_len);
}
}
static void update_route(struct bat_priv *bat_priv,
struct orig_node *orig_node,
struct neigh_node *neigh_node,
- unsigned char *hna_buff, int hna_buff_len)
+ unsigned char *tt_buff, int tt_buff_len)
{
- struct neigh_node *neigh_node_tmp;
+ struct neigh_node *curr_router;
+
+ curr_router = orig_node_get_router(orig_node);
/* route deleted */
- if ((orig_node->router) && (!neigh_node)) {
+ if ((curr_router) && (!neigh_node)) {
bat_dbg(DBG_ROUTES, bat_priv, "Deleting route towards: %pM\n",
orig_node->orig);
- hna_global_del_orig(bat_priv, orig_node,
+ tt_global_del_orig(bat_priv, orig_node,
"originator timed out");
- /* route added */
- } else if ((!orig_node->router) && (neigh_node)) {
+ /* route added */
+ } else if ((!curr_router) && (neigh_node)) {
bat_dbg(DBG_ROUTES, bat_priv,
"Adding route towards: %pM (via %pM)\n",
orig_node->orig, neigh_node->addr);
- hna_global_add_orig(bat_priv, orig_node,
- hna_buff, hna_buff_len);
+ tt_global_add_orig(bat_priv, orig_node,
+ tt_buff, tt_buff_len);
- /* route changed */
+ /* route changed */
} else {
bat_dbg(DBG_ROUTES, bat_priv,
"Changing route towards: %pM "
"(now via %pM - was via %pM)\n",
orig_node->orig, neigh_node->addr,
- orig_node->router->addr);
+ curr_router->addr);
}
+ if (curr_router)
+ neigh_node_free_ref(curr_router);
+
+ /* increase refcount of new best neighbor */
if (neigh_node && !atomic_inc_not_zero(&neigh_node->refcount))
neigh_node = NULL;
- neigh_node_tmp = orig_node->router;
- orig_node->router = neigh_node;
- if (neigh_node_tmp)
- neigh_node_free_ref(neigh_node_tmp);
+
+ spin_lock_bh(&orig_node->neigh_list_lock);
+ rcu_assign_pointer(orig_node->router, neigh_node);
+ spin_unlock_bh(&orig_node->neigh_list_lock);
+
+ /* decrease refcount of previous best neighbor */
+ if (curr_router)
+ neigh_node_free_ref(curr_router);
}
void update_routes(struct bat_priv *bat_priv, struct orig_node *orig_node,
- struct neigh_node *neigh_node, unsigned char *hna_buff,
- int hna_buff_len)
+ struct neigh_node *neigh_node, unsigned char *tt_buff,
+ int tt_buff_len)
{
+ struct neigh_node *router = NULL;
if (!orig_node)
- return;
+ goto out;
- if (orig_node->router != neigh_node)
+ router = orig_node_get_router(orig_node);
+
+ if (router != neigh_node)
update_route(bat_priv, orig_node, neigh_node,
- hna_buff, hna_buff_len);
- /* may be just HNA changed */
+ tt_buff, tt_buff_len);
+ /* may be just TT changed */
else
- update_HNA(bat_priv, orig_node, hna_buff, hna_buff_len);
+ update_TT(bat_priv, orig_node, tt_buff, tt_buff_len);
+
+out:
+ if (router)
+ neigh_node_free_ref(router);
}
static int is_bidirectional_neigh(struct orig_node *orig_node,
@@ -152,65 +169,41 @@
uint8_t orig_eq_count, neigh_rq_count, tq_own;
int tq_asym_penalty, ret = 0;
- if (orig_node == orig_neigh_node) {
- rcu_read_lock();
- hlist_for_each_entry_rcu(tmp_neigh_node, node,
- &orig_node->neigh_list, list) {
+ /* find corresponding one hop neighbor */
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(tmp_neigh_node, node,
+ &orig_neigh_node->neigh_list, list) {
- if (!compare_eth(tmp_neigh_node->addr,
- orig_neigh_node->orig))
- continue;
+ if (!compare_eth(tmp_neigh_node->addr, orig_neigh_node->orig))
+ continue;
- if (tmp_neigh_node->if_incoming != if_incoming)
- continue;
+ if (tmp_neigh_node->if_incoming != if_incoming)
+ continue;
- if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
- continue;
+ if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
+ continue;
- neigh_node = tmp_neigh_node;
- }
- rcu_read_unlock();
-
- if (!neigh_node)
- neigh_node = create_neighbor(orig_node,
- orig_neigh_node,
- orig_neigh_node->orig,
- if_incoming);
- if (!neigh_node)
- goto out;
-
- neigh_node->last_valid = jiffies;
- } else {
- /* find packet count of corresponding one hop neighbor */
- rcu_read_lock();
- hlist_for_each_entry_rcu(tmp_neigh_node, node,
- &orig_neigh_node->neigh_list, list) {
-
- if (!compare_eth(tmp_neigh_node->addr,
- orig_neigh_node->orig))
- continue;
-
- if (tmp_neigh_node->if_incoming != if_incoming)
- continue;
-
- if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
- continue;
-
- neigh_node = tmp_neigh_node;
- }
- rcu_read_unlock();
-
- if (!neigh_node)
- neigh_node = create_neighbor(orig_neigh_node,
- orig_neigh_node,
- orig_neigh_node->orig,
- if_incoming);
- if (!neigh_node)
- goto out;
+ neigh_node = tmp_neigh_node;
+ break;
}
+ rcu_read_unlock();
+
+ if (!neigh_node)
+ neigh_node = create_neighbor(orig_neigh_node,
+ orig_neigh_node,
+ orig_neigh_node->orig,
+ if_incoming);
+
+ if (!neigh_node)
+ goto out;
+
+ /* if orig_node is direct neighbour update neigh_node last_valid */
+ if (orig_node == orig_neigh_node)
+ neigh_node->last_valid = jiffies;
orig_node->last_valid = jiffies;
+ /* find packet count of corresponding one hop neighbor */
spin_lock_bh(&orig_node->ogm_cnt_lock);
orig_eq_count = orig_neigh_node->bcast_own_sum[if_incoming->if_num];
neigh_rq_count = neigh_node->real_packet_count;
@@ -288,8 +281,8 @@
struct neigh_node *neigh_node)
{
struct hlist_node *node;
- struct neigh_node *tmp_neigh_node;
- uint8_t best_tq, interference_candidate = 0;
+ struct neigh_node *tmp_neigh_node, *router = NULL;
+ uint8_t interference_candidate = 0;
spin_lock_bh(&orig_node->neigh_list_lock);
@@ -298,13 +291,12 @@
neigh_node->orig_node->primary_addr))
goto candidate_del;
- if (!orig_node->router)
+ router = orig_node_get_router(orig_node);
+ if (!router)
goto candidate_del;
- best_tq = orig_node->router->tq_avg;
-
/* ... and is good enough to be considered */
- if (neigh_node->tq_avg < best_tq - BONDING_TQ_THRESHOLD)
+ if (neigh_node->tq_avg < router->tq_avg - BONDING_TQ_THRESHOLD)
goto candidate_del;
/**
@@ -350,7 +342,9 @@
out:
spin_unlock_bh(&orig_node->neigh_list_lock);
- return;
+
+ if (router)
+ neigh_node_free_ref(router);
}
/* copy primary address for bonding */
@@ -369,13 +363,14 @@
struct ethhdr *ethhdr,
struct batman_packet *batman_packet,
struct hard_iface *if_incoming,
- unsigned char *hna_buff, int hna_buff_len,
+ unsigned char *tt_buff, int tt_buff_len,
char is_duplicate)
{
struct neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL;
+ struct neigh_node *router = NULL;
struct orig_node *orig_node_tmp;
struct hlist_node *node;
- int tmp_hna_buff_len;
+ int tmp_tt_buff_len;
uint8_t bcast_own_sum_orig, bcast_own_sum_neigh;
bat_dbg(DBG_BATMAN, bat_priv, "update_originator(): "
@@ -396,10 +391,12 @@
if (is_duplicate)
continue;
+ spin_lock_bh(&tmp_neigh_node->tq_lock);
ring_buffer_set(tmp_neigh_node->tq_recv,
&tmp_neigh_node->tq_index, 0);
tmp_neigh_node->tq_avg =
ring_buffer_avg(tmp_neigh_node->tq_recv);
+ spin_unlock_bh(&tmp_neigh_node->tq_lock);
}
if (!neigh_node) {
@@ -424,10 +421,12 @@
orig_node->flags = batman_packet->flags;
neigh_node->last_valid = jiffies;
+ spin_lock_bh(&neigh_node->tq_lock);
ring_buffer_set(neigh_node->tq_recv,
&neigh_node->tq_index,
batman_packet->tq);
neigh_node->tq_avg = ring_buffer_avg(neigh_node->tq_recv);
+ spin_unlock_bh(&neigh_node->tq_lock);
if (!is_duplicate) {
orig_node->last_ttl = batman_packet->ttl;
@@ -436,24 +435,23 @@
bonding_candidate_add(orig_node, neigh_node);
- tmp_hna_buff_len = (hna_buff_len > batman_packet->num_hna * ETH_ALEN ?
- batman_packet->num_hna * ETH_ALEN : hna_buff_len);
+ tmp_tt_buff_len = (tt_buff_len > batman_packet->num_tt * ETH_ALEN ?
+ batman_packet->num_tt * ETH_ALEN : tt_buff_len);
/* if this neighbor already is our next hop there is nothing
* to change */
- if (orig_node->router == neigh_node)
- goto update_hna;
+ router = orig_node_get_router(orig_node);
+ if (router == neigh_node)
+ goto update_tt;
/* if this neighbor does not offer a better TQ we won't consider it */
- if ((orig_node->router) &&
- (orig_node->router->tq_avg > neigh_node->tq_avg))
- goto update_hna;
+ if (router && (router->tq_avg > neigh_node->tq_avg))
+ goto update_tt;
/* if the TQ is the same and the link not more symetric we
* won't consider it either */
- if ((orig_node->router) &&
- (neigh_node->tq_avg == orig_node->router->tq_avg)) {
- orig_node_tmp = orig_node->router->orig_node;
+ if (router && (neigh_node->tq_avg == router->tq_avg)) {
+ orig_node_tmp = router->orig_node;
spin_lock_bh(&orig_node_tmp->ogm_cnt_lock);
bcast_own_sum_orig =
orig_node_tmp->bcast_own_sum[if_incoming->if_num];
@@ -466,16 +464,16 @@
spin_unlock_bh(&orig_node_tmp->ogm_cnt_lock);
if (bcast_own_sum_orig >= bcast_own_sum_neigh)
- goto update_hna;
+ goto update_tt;
}
update_routes(bat_priv, orig_node, neigh_node,
- hna_buff, tmp_hna_buff_len);
+ tt_buff, tmp_tt_buff_len);
goto update_gw;
-update_hna:
- update_routes(bat_priv, orig_node, orig_node->router,
- hna_buff, tmp_hna_buff_len);
+update_tt:
+ update_routes(bat_priv, orig_node, router,
+ tt_buff, tmp_tt_buff_len);
update_gw:
if (orig_node->gw_flags != batman_packet->gw_flags)
@@ -496,6 +494,8 @@
out:
if (neigh_node)
neigh_node_free_ref(neigh_node);
+ if (router)
+ neigh_node_free_ref(router);
}
/* checks whether the host restarted and is in the protection time.
@@ -597,12 +597,14 @@
void receive_bat_packet(struct ethhdr *ethhdr,
struct batman_packet *batman_packet,
- unsigned char *hna_buff, int hna_buff_len,
+ unsigned char *tt_buff, int tt_buff_len,
struct hard_iface *if_incoming)
{
struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
struct hard_iface *hard_iface;
struct orig_node *orig_neigh_node, *orig_node;
+ struct neigh_node *router = NULL, *router_router = NULL;
+ struct neigh_node *orig_neigh_router = NULL;
char has_directlink_flag;
char is_my_addr = 0, is_my_orig = 0, is_my_oldorig = 0;
char is_broadcast = 0, is_bidirectional, is_single_hop_neigh;
@@ -747,14 +749,15 @@
goto out;
}
+ router = orig_node_get_router(orig_node);
+ if (router)
+ router_router = orig_node_get_router(router->orig_node);
+
/* avoid temporary routing loops */
- if ((orig_node->router) &&
- (orig_node->router->orig_node->router) &&
- (compare_eth(orig_node->router->addr,
- batman_packet->prev_sender)) &&
+ if (router && router_router &&
+ (compare_eth(router->addr, batman_packet->prev_sender)) &&
!(compare_eth(batman_packet->orig, batman_packet->prev_sender)) &&
- (compare_eth(orig_node->router->addr,
- orig_node->router->orig_node->router->addr))) {
+ (compare_eth(router->addr, router_router->addr))) {
bat_dbg(DBG_BATMAN, bat_priv,
"Drop packet: ignoring all rebroadcast packets that "
"may make me loop (sender: %pM)\n", ethhdr->h_source);
@@ -769,9 +772,11 @@
if (!orig_neigh_node)
goto out;
+ orig_neigh_router = orig_node_get_router(orig_neigh_node);
+
/* drop packet if sender is not a direct neighbor and if we
* don't route towards it */
- if (!is_single_hop_neigh && (!orig_neigh_node->router)) {
+ if (!is_single_hop_neigh && (!orig_neigh_router)) {
bat_dbg(DBG_BATMAN, bat_priv,
"Drop packet: OGM via unknown neighbor!\n");
goto out_neigh;
@@ -789,14 +794,14 @@
((orig_node->last_real_seqno == batman_packet->seqno) &&
(orig_node->last_ttl - 3 <= batman_packet->ttl))))
update_orig(bat_priv, orig_node, ethhdr, batman_packet,
- if_incoming, hna_buff, hna_buff_len, is_duplicate);
+ if_incoming, tt_buff, tt_buff_len, is_duplicate);
/* is single hop (direct) neighbor */
if (is_single_hop_neigh) {
/* mark direct link on incoming interface */
schedule_forward_packet(orig_node, ethhdr, batman_packet,
- 1, hna_buff_len, if_incoming);
+ 1, tt_buff_len, if_incoming);
bat_dbg(DBG_BATMAN, bat_priv, "Forwarding packet: "
"rebroadcast neighbor packet with direct link flag\n");
@@ -819,12 +824,19 @@
bat_dbg(DBG_BATMAN, bat_priv,
"Forwarding packet: rebroadcast originator packet\n");
schedule_forward_packet(orig_node, ethhdr, batman_packet,
- 0, hna_buff_len, if_incoming);
+ 0, tt_buff_len, if_incoming);
out_neigh:
if ((orig_neigh_node) && (!is_single_hop_neigh))
orig_node_free_ref(orig_neigh_node);
out:
+ if (router)
+ neigh_node_free_ref(router);
+ if (router_router)
+ neigh_node_free_ref(router_router);
+ if (orig_neigh_router)
+ neigh_node_free_ref(orig_neigh_router);
+
orig_node_free_ref(orig_node);
}
@@ -868,8 +880,9 @@
static int recv_my_icmp_packet(struct bat_priv *bat_priv,
struct sk_buff *skb, size_t icmp_len)
{
+ struct hard_iface *primary_if = NULL;
struct orig_node *orig_node = NULL;
- struct neigh_node *neigh_node = NULL;
+ struct neigh_node *router = NULL;
struct icmp_packet_rr *icmp_packet;
int ret = NET_RX_DROP;
@@ -881,28 +894,19 @@
goto out;
}
- if (!bat_priv->primary_if)
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
goto out;
/* answer echo request (ping) */
/* get routing information */
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, icmp_packet->orig);
-
if (!orig_node)
- goto unlock;
+ goto out;
- neigh_node = orig_node->router;
-
- if (!neigh_node)
- goto unlock;
-
- if (!atomic_inc_not_zero(&neigh_node->refcount)) {
- neigh_node = NULL;
- goto unlock;
- }
-
- rcu_read_unlock();
+ router = orig_node_get_router(orig_node);
+ if (!router)
+ goto out;
/* create a copy of the skb, if needed, to modify it. */
if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
@@ -911,20 +915,18 @@
icmp_packet = (struct icmp_packet_rr *)skb->data;
memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
- memcpy(icmp_packet->orig,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ memcpy(icmp_packet->orig, primary_if->net_dev->dev_addr, ETH_ALEN);
icmp_packet->msg_type = ECHO_REPLY;
icmp_packet->ttl = TTL;
- send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
+ send_skb_packet(skb, router->if_incoming, router->addr);
ret = NET_RX_SUCCESS;
- goto out;
-unlock:
- rcu_read_unlock();
out:
- if (neigh_node)
- neigh_node_free_ref(neigh_node);
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ if (router)
+ neigh_node_free_ref(router);
if (orig_node)
orig_node_free_ref(orig_node);
return ret;
@@ -933,8 +935,9 @@
static int recv_icmp_ttl_exceeded(struct bat_priv *bat_priv,
struct sk_buff *skb)
{
+ struct hard_iface *primary_if = NULL;
struct orig_node *orig_node = NULL;
- struct neigh_node *neigh_node = NULL;
+ struct neigh_node *router = NULL;
struct icmp_packet *icmp_packet;
int ret = NET_RX_DROP;
@@ -948,27 +951,18 @@
goto out;
}
- if (!bat_priv->primary_if)
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
goto out;
/* get routing information */
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, icmp_packet->orig);
-
if (!orig_node)
- goto unlock;
+ goto out;
- neigh_node = orig_node->router;
-
- if (!neigh_node)
- goto unlock;
-
- if (!atomic_inc_not_zero(&neigh_node->refcount)) {
- neigh_node = NULL;
- goto unlock;
- }
-
- rcu_read_unlock();
+ router = orig_node_get_router(orig_node);
+ if (!router)
+ goto out;
/* create a copy of the skb, if needed, to modify it. */
if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
@@ -977,20 +971,18 @@
icmp_packet = (struct icmp_packet *)skb->data;
memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
- memcpy(icmp_packet->orig,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ memcpy(icmp_packet->orig, primary_if->net_dev->dev_addr, ETH_ALEN);
icmp_packet->msg_type = TTL_EXCEEDED;
icmp_packet->ttl = TTL;
- send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
+ send_skb_packet(skb, router->if_incoming, router->addr);
ret = NET_RX_SUCCESS;
- goto out;
-unlock:
- rcu_read_unlock();
out:
- if (neigh_node)
- neigh_node_free_ref(neigh_node);
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ if (router)
+ neigh_node_free_ref(router);
if (orig_node)
orig_node_free_ref(orig_node);
return ret;
@@ -1003,7 +995,7 @@
struct icmp_packet_rr *icmp_packet;
struct ethhdr *ethhdr;
struct orig_node *orig_node = NULL;
- struct neigh_node *neigh_node = NULL;
+ struct neigh_node *router = NULL;
int hdr_size = sizeof(struct icmp_packet);
int ret = NET_RX_DROP;
@@ -1050,23 +1042,13 @@
return recv_icmp_ttl_exceeded(bat_priv, skb);
/* get routing information */
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, icmp_packet->dst);
-
if (!orig_node)
- goto unlock;
+ goto out;
- neigh_node = orig_node->router;
-
- if (!neigh_node)
- goto unlock;
-
- if (!atomic_inc_not_zero(&neigh_node->refcount)) {
- neigh_node = NULL;
- goto unlock;
- }
-
- rcu_read_unlock();
+ router = orig_node_get_router(orig_node);
+ if (!router)
+ goto out;
/* create a copy of the skb, if needed, to modify it. */
if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
@@ -1078,20 +1060,117 @@
icmp_packet->ttl--;
/* route it */
- send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
+ send_skb_packet(skb, router->if_incoming, router->addr);
ret = NET_RX_SUCCESS;
- goto out;
-unlock:
- rcu_read_unlock();
out:
- if (neigh_node)
- neigh_node_free_ref(neigh_node);
+ if (router)
+ neigh_node_free_ref(router);
if (orig_node)
orig_node_free_ref(orig_node);
return ret;
}
+/* In the bonding case, send the packets in a round
+ * robin fashion over the remaining interfaces.
+ *
+ * This method rotates the bonding list and increases the
+ * returned router's refcount. */
+static struct neigh_node *find_bond_router(struct orig_node *primary_orig,
+ struct hard_iface *recv_if)
+{
+ struct neigh_node *tmp_neigh_node;
+ struct neigh_node *router = NULL, *first_candidate = NULL;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(tmp_neigh_node, &primary_orig->bond_list,
+ bonding_list) {
+ if (!first_candidate)
+ first_candidate = tmp_neigh_node;
+
+ /* recv_if == NULL on the first node. */
+ if (tmp_neigh_node->if_incoming == recv_if)
+ continue;
+
+ if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
+ continue;
+
+ router = tmp_neigh_node;
+ break;
+ }
+
+ /* use the first candidate if nothing was found. */
+ if (!router && first_candidate &&
+ atomic_inc_not_zero(&first_candidate->refcount))
+ router = first_candidate;
+
+ if (!router)
+ goto out;
+
+ /* selected should point to the next element
+ * after the current router */
+ spin_lock_bh(&primary_orig->neigh_list_lock);
+ /* this is a list_move(), which unfortunately
+ * does not exist as rcu version */
+ list_del_rcu(&primary_orig->bond_list);
+ list_add_rcu(&primary_orig->bond_list,
+ &router->bonding_list);
+ spin_unlock_bh(&primary_orig->neigh_list_lock);
+
+out:
+ rcu_read_unlock();
+ return router;
+}
+
+/* Interface Alternating: Use the best of the
+ * remaining candidates which are not using
+ * this interface.
+ *
+ * Increases the returned router's refcount */
+static struct neigh_node *find_ifalter_router(struct orig_node *primary_orig,
+ struct hard_iface *recv_if)
+{
+ struct neigh_node *tmp_neigh_node;
+ struct neigh_node *router = NULL, *first_candidate = NULL;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(tmp_neigh_node, &primary_orig->bond_list,
+ bonding_list) {
+ if (!first_candidate)
+ first_candidate = tmp_neigh_node;
+
+ /* recv_if == NULL on the first node. */
+ if (tmp_neigh_node->if_incoming == recv_if)
+ continue;
+
+ if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
+ continue;
+
+ /* if we don't have a router yet
+ * or this one is better, choose it. */
+ if ((!router) ||
+ (tmp_neigh_node->tq_avg > router->tq_avg)) {
+ /* decrement refcount of
+ * previously selected router */
+ if (router)
+ neigh_node_free_ref(router);
+
+ router = tmp_neigh_node;
+ atomic_inc_not_zero(&router->refcount);
+ }
+
+ neigh_node_free_ref(tmp_neigh_node);
+ }
+
+ /* use the first candidate if nothing was found. */
+ if (!router && first_candidate &&
+ atomic_inc_not_zero(&first_candidate->refcount))
+ router = first_candidate;
+
+ rcu_read_unlock();
+ return router;
+}
+
/* find a suitable router for this originator, and use
* bonding if possible. increases the found neighbors
* refcount.*/
@@ -1101,15 +1180,16 @@
{
struct orig_node *primary_orig_node;
struct orig_node *router_orig;
- struct neigh_node *router, *first_candidate, *tmp_neigh_node;
+ struct neigh_node *router;
static uint8_t zero_mac[ETH_ALEN] = {0, 0, 0, 0, 0, 0};
int bonding_enabled;
if (!orig_node)
return NULL;
- if (!orig_node->router)
- return NULL;
+ router = orig_node_get_router(orig_node);
+ if (!router)
+ goto err;
/* without bonding, the first node should
* always choose the default router. */
@@ -1117,12 +1197,9 @@
rcu_read_lock();
/* select default router to output */
- router = orig_node->router;
- router_orig = orig_node->router->orig_node;
- if (!router_orig || !atomic_inc_not_zero(&router->refcount)) {
- rcu_read_unlock();
- return NULL;
- }
+ router_orig = router->orig_node;
+ if (!router_orig)
+ goto err_unlock;
if ((!recv_if) && (!bonding_enabled))
goto return_router;
@@ -1151,91 +1228,26 @@
if (atomic_read(&primary_orig_node->bond_candidates) < 2)
goto return_router;
-
/* all nodes between should choose a candidate which
* is is not on the interface where the packet came
* in. */
neigh_node_free_ref(router);
- first_candidate = NULL;
- router = NULL;
- if (bonding_enabled) {
- /* in the bonding case, send the packets in a round
- * robin fashion over the remaining interfaces. */
+ if (bonding_enabled)
+ router = find_bond_router(primary_orig_node, recv_if);
+ else
+ router = find_ifalter_router(primary_orig_node, recv_if);
- list_for_each_entry_rcu(tmp_neigh_node,
- &primary_orig_node->bond_list, bonding_list) {
- if (!first_candidate)
- first_candidate = tmp_neigh_node;
- /* recv_if == NULL on the first node. */
- if (tmp_neigh_node->if_incoming != recv_if &&
- atomic_inc_not_zero(&tmp_neigh_node->refcount)) {
- router = tmp_neigh_node;
- break;
- }
- }
-
- /* use the first candidate if nothing was found. */
- if (!router && first_candidate &&
- atomic_inc_not_zero(&first_candidate->refcount))
- router = first_candidate;
-
- if (!router) {
- rcu_read_unlock();
- return NULL;
- }
-
- /* selected should point to the next element
- * after the current router */
- spin_lock_bh(&primary_orig_node->neigh_list_lock);
- /* this is a list_move(), which unfortunately
- * does not exist as rcu version */
- list_del_rcu(&primary_orig_node->bond_list);
- list_add_rcu(&primary_orig_node->bond_list,
- &router->bonding_list);
- spin_unlock_bh(&primary_orig_node->neigh_list_lock);
-
- } else {
- /* if bonding is disabled, use the best of the
- * remaining candidates which are not using
- * this interface. */
- list_for_each_entry_rcu(tmp_neigh_node,
- &primary_orig_node->bond_list, bonding_list) {
- if (!first_candidate)
- first_candidate = tmp_neigh_node;
-
- /* recv_if == NULL on the first node. */
- if (tmp_neigh_node->if_incoming == recv_if)
- continue;
-
- if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
- continue;
-
- /* if we don't have a router yet
- * or this one is better, choose it. */
- if ((!router) ||
- (tmp_neigh_node->tq_avg > router->tq_avg)) {
- /* decrement refcount of
- * previously selected router */
- if (router)
- neigh_node_free_ref(router);
-
- router = tmp_neigh_node;
- atomic_inc_not_zero(&router->refcount);
- }
-
- neigh_node_free_ref(tmp_neigh_node);
- }
-
- /* use the first candidate if nothing was found. */
- if (!router && first_candidate &&
- atomic_inc_not_zero(&first_candidate->refcount))
- router = first_candidate;
- }
return_router:
rcu_read_unlock();
return router;
+err_unlock:
+ rcu_read_unlock();
+err:
+ if (router)
+ neigh_node_free_ref(router);
+ return NULL;
}
static int check_unicast_packet(struct sk_buff *skb, int hdr_size)
@@ -1284,13 +1296,10 @@
}
/* get routing information */
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, unicast_packet->dest);
if (!orig_node)
- goto unlock;
-
- rcu_read_unlock();
+ goto out;
/* find_router() increases neigh_nodes refcount if found. */
neigh_node = find_router(bat_priv, orig_node, recv_if);
@@ -1336,10 +1345,7 @@
/* route it */
send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
ret = NET_RX_SUCCESS;
- goto out;
-unlock:
- rcu_read_unlock();
out:
if (neigh_node)
neigh_node_free_ref(neigh_node);
@@ -1438,13 +1444,10 @@
if (bcast_packet->ttl < 2)
goto out;
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, bcast_packet->orig);
if (!orig_node)
- goto rcu_unlock;
-
- rcu_read_unlock();
+ goto out;
spin_lock_bh(&orig_node->bcast_seqno_lock);
@@ -1475,9 +1478,6 @@
ret = NET_RX_SUCCESS;
goto out;
-rcu_unlock:
- rcu_read_unlock();
- goto out;
spin_unlock:
spin_unlock_bh(&orig_node->bcast_seqno_lock);
out:
diff --git a/net/batman-adv/routing.h b/net/batman-adv/routing.h
index b5a064c..870f298 100644
--- a/net/batman-adv/routing.h
+++ b/net/batman-adv/routing.h
@@ -25,11 +25,11 @@
void slide_own_bcast_window(struct hard_iface *hard_iface);
void receive_bat_packet(struct ethhdr *ethhdr,
struct batman_packet *batman_packet,
- unsigned char *hna_buff, int hna_buff_len,
+ unsigned char *tt_buff, int tt_buff_len,
struct hard_iface *if_incoming);
void update_routes(struct bat_priv *bat_priv, struct orig_node *orig_node,
- struct neigh_node *neigh_node, unsigned char *hna_buff,
- int hna_buff_len);
+ struct neigh_node *neigh_node, unsigned char *tt_buff,
+ int tt_buff_len);
int route_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if);
int recv_icmp_packet(struct sk_buff *skb, struct hard_iface *recv_if);
int recv_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if);
diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c
index d49e54d..3377927 100644
--- a/net/batman-adv/send.c
+++ b/net/batman-adv/send.c
@@ -121,7 +121,7 @@
/* adjust all flags and log packets */
while (aggregated_packet(buff_pos,
forw_packet->packet_len,
- batman_packet->num_hna)) {
+ batman_packet->num_tt)) {
/* we might have aggregated direct link packets with an
* ordinary base packet */
@@ -146,7 +146,7 @@
hard_iface->net_dev->dev_addr);
buff_pos += sizeof(struct batman_packet) +
- (batman_packet->num_hna * ETH_ALEN);
+ (batman_packet->num_tt * ETH_ALEN);
packet_num++;
batman_packet = (struct batman_packet *)
(forw_packet->skb->data + buff_pos);
@@ -222,7 +222,7 @@
struct batman_packet *batman_packet;
new_len = sizeof(struct batman_packet) +
- (bat_priv->num_local_hna * ETH_ALEN);
+ (bat_priv->num_local_tt * ETH_ALEN);
new_buff = kmalloc(new_len, GFP_ATOMIC);
/* keep old buffer if kmalloc should fail */
@@ -231,7 +231,7 @@
sizeof(struct batman_packet));
batman_packet = (struct batman_packet *)new_buff;
- batman_packet->num_hna = hna_local_fill_buffer(bat_priv,
+ batman_packet->num_tt = tt_local_fill_buffer(bat_priv,
new_buff + sizeof(struct batman_packet),
new_len - sizeof(struct batman_packet));
@@ -244,6 +244,7 @@
void schedule_own_packet(struct hard_iface *hard_iface)
{
struct bat_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
+ struct hard_iface *primary_if;
unsigned long send_time;
struct batman_packet *batman_packet;
int vis_server;
@@ -253,6 +254,7 @@
return;
vis_server = atomic_read(&bat_priv->vis_mode);
+ primary_if = primary_if_get_selected(bat_priv);
/**
* the interface gets activated here to avoid race conditions between
@@ -264,9 +266,9 @@
if (hard_iface->if_status == IF_TO_BE_ACTIVATED)
hard_iface->if_status = IF_ACTIVE;
- /* if local hna has changed and interface is a primary interface */
- if ((atomic_read(&bat_priv->hna_local_changed)) &&
- (hard_iface == bat_priv->primary_if))
+ /* if local tt has changed and interface is a primary interface */
+ if ((atomic_read(&bat_priv->tt_local_changed)) &&
+ (hard_iface == primary_if))
rebuild_batman_packet(bat_priv, hard_iface);
/**
@@ -284,7 +286,7 @@
else
batman_packet->flags &= ~VIS_SERVER;
- if ((hard_iface == bat_priv->primary_if) &&
+ if ((hard_iface == primary_if) &&
(atomic_read(&bat_priv->gw_mode) == GW_MODE_SERVER))
batman_packet->gw_flags =
(uint8_t)atomic_read(&bat_priv->gw_bandwidth);
@@ -299,15 +301,19 @@
hard_iface->packet_buff,
hard_iface->packet_len,
hard_iface, 1, send_time);
+
+ if (primary_if)
+ hardif_free_ref(primary_if);
}
void schedule_forward_packet(struct orig_node *orig_node,
struct ethhdr *ethhdr,
struct batman_packet *batman_packet,
- uint8_t directlink, int hna_buff_len,
+ uint8_t directlink, int tt_buff_len,
struct hard_iface *if_incoming)
{
struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+ struct neigh_node *router;
unsigned char in_tq, in_ttl, tq_avg = 0;
unsigned long send_time;
@@ -316,6 +322,8 @@
return;
}
+ router = orig_node_get_router(orig_node);
+
in_tq = batman_packet->tq;
in_ttl = batman_packet->ttl;
@@ -324,20 +332,22 @@
/* rebroadcast tq of our best ranking neighbor to ensure the rebroadcast
* of our best tq value */
- if ((orig_node->router) && (orig_node->router->tq_avg != 0)) {
+ if (router && router->tq_avg != 0) {
/* rebroadcast ogm of best ranking neighbor as is */
- if (!compare_eth(orig_node->router->addr, ethhdr->h_source)) {
- batman_packet->tq = orig_node->router->tq_avg;
+ if (!compare_eth(router->addr, ethhdr->h_source)) {
+ batman_packet->tq = router->tq_avg;
- if (orig_node->router->last_ttl)
- batman_packet->ttl = orig_node->router->last_ttl
- - 1;
+ if (router->last_ttl)
+ batman_packet->ttl = router->last_ttl - 1;
}
- tq_avg = orig_node->router->tq_avg;
+ tq_avg = router->tq_avg;
}
+ if (router)
+ neigh_node_free_ref(router);
+
/* apply hop penalty */
batman_packet->tq = hop_penalty(batman_packet->tq, bat_priv);
@@ -359,7 +369,7 @@
send_time = forward_send_time();
add_bat_packet_to_list(bat_priv,
(unsigned char *)batman_packet,
- sizeof(struct batman_packet) + hna_buff_len,
+ sizeof(struct batman_packet) + tt_buff_len,
if_incoming, 0, send_time);
}
@@ -367,6 +377,8 @@
{
if (forw_packet->skb)
kfree_skb(forw_packet->skb);
+ if (forw_packet->if_incoming)
+ hardif_free_ref(forw_packet->if_incoming);
kfree(forw_packet);
}
@@ -388,7 +400,6 @@
send_time);
}
-#define atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
/* add a broadcast packet to the queue and setup timers. broadcast packets
* are sent multiple times to increase probability for beeing received.
*
@@ -399,6 +410,7 @@
* skb is freed. */
int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb)
{
+ struct hard_iface *primary_if = NULL;
struct forw_packet *forw_packet;
struct bcast_packet *bcast_packet;
@@ -407,8 +419,9 @@
goto out;
}
- if (!bat_priv->primary_if)
- goto out;
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ goto out_and_inc;
forw_packet = kmalloc(sizeof(struct forw_packet), GFP_ATOMIC);
@@ -426,7 +439,7 @@
skb_reset_mac_header(skb);
forw_packet->skb = skb;
- forw_packet->if_incoming = bat_priv->primary_if;
+ forw_packet->if_incoming = primary_if;
/* how often did we send the bcast packet ? */
forw_packet->num_packets = 0;
@@ -439,6 +452,8 @@
out_and_inc:
atomic_inc(&bat_priv->bcast_queue_left);
out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
return NETDEV_TX_BUSY;
}
@@ -526,6 +541,7 @@
{
struct forw_packet *forw_packet;
struct hlist_node *tmp_node, *safe_tmp_node;
+ bool pending;
if (hard_iface)
bat_dbg(DBG_BATMAN, bat_priv,
@@ -554,8 +570,13 @@
* send_outstanding_bcast_packet() will lock the list to
* delete the item from the list
*/
- cancel_delayed_work_sync(&forw_packet->delayed_work);
+ pending = cancel_delayed_work_sync(&forw_packet->delayed_work);
spin_lock_bh(&bat_priv->forw_bcast_list_lock);
+
+ if (pending) {
+ hlist_del(&forw_packet->list);
+ forw_packet_free(forw_packet);
+ }
}
spin_unlock_bh(&bat_priv->forw_bcast_list_lock);
@@ -578,8 +599,13 @@
* send_outstanding_bat_packet() will lock the list to
* delete the item from the list
*/
- cancel_delayed_work_sync(&forw_packet->delayed_work);
+ pending = cancel_delayed_work_sync(&forw_packet->delayed_work);
spin_lock_bh(&bat_priv->forw_bat_list_lock);
+
+ if (pending) {
+ hlist_del(&forw_packet->list);
+ forw_packet_free(forw_packet);
+ }
}
spin_unlock_bh(&bat_priv->forw_bat_list_lock);
}
diff --git a/net/batman-adv/send.h b/net/batman-adv/send.h
index 7b2ff19..247172d 100644
--- a/net/batman-adv/send.h
+++ b/net/batman-adv/send.h
@@ -29,7 +29,7 @@
void schedule_forward_packet(struct orig_node *orig_node,
struct ethhdr *ethhdr,
struct batman_packet *batman_packet,
- uint8_t directlink, int hna_buff_len,
+ uint8_t directlink, int tt_buff_len,
struct hard_iface *if_outgoing);
int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb);
void send_outstanding_bat_packet(struct work_struct *work);
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 824e1f6..d5aa609 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -43,8 +43,6 @@
static u32 bat_get_msglevel(struct net_device *dev);
static void bat_set_msglevel(struct net_device *dev, u32 value);
static u32 bat_get_link(struct net_device *dev);
-static u32 bat_get_rx_csum(struct net_device *dev);
-static int bat_set_rx_csum(struct net_device *dev, u32 data);
static const struct ethtool_ops bat_ethtool_ops = {
.get_settings = bat_get_settings,
@@ -52,8 +50,6 @@
.get_msglevel = bat_get_msglevel,
.set_msglevel = bat_set_msglevel,
.get_link = bat_get_link,
- .get_rx_csum = bat_get_rx_csum,
- .set_rx_csum = bat_set_rx_csum
};
int my_skb_head_push(struct sk_buff *skb, unsigned int len)
@@ -76,120 +72,371 @@
return 0;
}
-static void softif_neigh_free_rcu(struct rcu_head *rcu)
-{
- struct softif_neigh *softif_neigh;
-
- softif_neigh = container_of(rcu, struct softif_neigh, rcu);
- kfree(softif_neigh);
-}
-
static void softif_neigh_free_ref(struct softif_neigh *softif_neigh)
{
if (atomic_dec_and_test(&softif_neigh->refcount))
- call_rcu(&softif_neigh->rcu, softif_neigh_free_rcu);
+ kfree_rcu(softif_neigh, rcu);
}
-void softif_neigh_purge(struct bat_priv *bat_priv)
+static void softif_neigh_vid_free_rcu(struct rcu_head *rcu)
{
- struct softif_neigh *softif_neigh, *softif_neigh_tmp;
+ struct softif_neigh_vid *softif_neigh_vid;
+ struct softif_neigh *softif_neigh;
struct hlist_node *node, *node_tmp;
+ struct bat_priv *bat_priv;
+
+ softif_neigh_vid = container_of(rcu, struct softif_neigh_vid, rcu);
+ bat_priv = softif_neigh_vid->bat_priv;
spin_lock_bh(&bat_priv->softif_neigh_lock);
-
hlist_for_each_entry_safe(softif_neigh, node, node_tmp,
- &bat_priv->softif_neigh_list, list) {
-
- if ((!time_after(jiffies, softif_neigh->last_seen +
- msecs_to_jiffies(SOFTIF_NEIGH_TIMEOUT))) &&
- (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE))
- continue;
-
+ &softif_neigh_vid->softif_neigh_list, list) {
hlist_del_rcu(&softif_neigh->list);
-
- if (bat_priv->softif_neigh == softif_neigh) {
- bat_dbg(DBG_ROUTES, bat_priv,
- "Current mesh exit point '%pM' vanished "
- "(vid: %d).\n",
- softif_neigh->addr, softif_neigh->vid);
- softif_neigh_tmp = bat_priv->softif_neigh;
- bat_priv->softif_neigh = NULL;
- softif_neigh_free_ref(softif_neigh_tmp);
- }
-
softif_neigh_free_ref(softif_neigh);
}
-
spin_unlock_bh(&bat_priv->softif_neigh_lock);
+
+ kfree(softif_neigh_vid);
+}
+
+static void softif_neigh_vid_free_ref(struct softif_neigh_vid *softif_neigh_vid)
+{
+ if (atomic_dec_and_test(&softif_neigh_vid->refcount))
+ call_rcu(&softif_neigh_vid->rcu, softif_neigh_vid_free_rcu);
+}
+
+static struct softif_neigh_vid *softif_neigh_vid_get(struct bat_priv *bat_priv,
+ short vid)
+{
+ struct softif_neigh_vid *softif_neigh_vid;
+ struct hlist_node *node;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(softif_neigh_vid, node,
+ &bat_priv->softif_neigh_vids, list) {
+ if (softif_neigh_vid->vid != vid)
+ continue;
+
+ if (!atomic_inc_not_zero(&softif_neigh_vid->refcount))
+ continue;
+
+ goto out;
+ }
+
+ softif_neigh_vid = kzalloc(sizeof(struct softif_neigh_vid),
+ GFP_ATOMIC);
+ if (!softif_neigh_vid)
+ goto out;
+
+ softif_neigh_vid->vid = vid;
+ softif_neigh_vid->bat_priv = bat_priv;
+
+ /* initialize with 2 - caller decrements counter by one */
+ atomic_set(&softif_neigh_vid->refcount, 2);
+ INIT_HLIST_HEAD(&softif_neigh_vid->softif_neigh_list);
+ INIT_HLIST_NODE(&softif_neigh_vid->list);
+ spin_lock_bh(&bat_priv->softif_neigh_vid_lock);
+ hlist_add_head_rcu(&softif_neigh_vid->list,
+ &bat_priv->softif_neigh_vids);
+ spin_unlock_bh(&bat_priv->softif_neigh_vid_lock);
+
+out:
+ rcu_read_unlock();
+ return softif_neigh_vid;
}
static struct softif_neigh *softif_neigh_get(struct bat_priv *bat_priv,
uint8_t *addr, short vid)
{
- struct softif_neigh *softif_neigh;
+ struct softif_neigh_vid *softif_neigh_vid;
+ struct softif_neigh *softif_neigh = NULL;
struct hlist_node *node;
+ softif_neigh_vid = softif_neigh_vid_get(bat_priv, vid);
+ if (!softif_neigh_vid)
+ goto out;
+
rcu_read_lock();
hlist_for_each_entry_rcu(softif_neigh, node,
- &bat_priv->softif_neigh_list, list) {
+ &softif_neigh_vid->softif_neigh_list,
+ list) {
if (!compare_eth(softif_neigh->addr, addr))
continue;
- if (softif_neigh->vid != vid)
- continue;
-
if (!atomic_inc_not_zero(&softif_neigh->refcount))
continue;
softif_neigh->last_seen = jiffies;
- goto out;
+ goto unlock;
}
softif_neigh = kzalloc(sizeof(struct softif_neigh), GFP_ATOMIC);
if (!softif_neigh)
- goto out;
+ goto unlock;
memcpy(softif_neigh->addr, addr, ETH_ALEN);
- softif_neigh->vid = vid;
softif_neigh->last_seen = jiffies;
/* initialize with 2 - caller decrements counter by one */
atomic_set(&softif_neigh->refcount, 2);
INIT_HLIST_NODE(&softif_neigh->list);
spin_lock_bh(&bat_priv->softif_neigh_lock);
- hlist_add_head_rcu(&softif_neigh->list, &bat_priv->softif_neigh_list);
+ hlist_add_head_rcu(&softif_neigh->list,
+ &softif_neigh_vid->softif_neigh_list);
+ spin_unlock_bh(&bat_priv->softif_neigh_lock);
+
+unlock:
+ rcu_read_unlock();
+out:
+ if (softif_neigh_vid)
+ softif_neigh_vid_free_ref(softif_neigh_vid);
+ return softif_neigh;
+}
+
+static struct softif_neigh *softif_neigh_get_selected(
+ struct softif_neigh_vid *softif_neigh_vid)
+{
+ struct softif_neigh *softif_neigh;
+
+ rcu_read_lock();
+ softif_neigh = rcu_dereference(softif_neigh_vid->softif_neigh);
+
+ if (softif_neigh && !atomic_inc_not_zero(&softif_neigh->refcount))
+ softif_neigh = NULL;
+
+ rcu_read_unlock();
+ return softif_neigh;
+}
+
+static struct softif_neigh *softif_neigh_vid_get_selected(
+ struct bat_priv *bat_priv,
+ short vid)
+{
+ struct softif_neigh_vid *softif_neigh_vid;
+ struct softif_neigh *softif_neigh = NULL;
+
+ softif_neigh_vid = softif_neigh_vid_get(bat_priv, vid);
+ if (!softif_neigh_vid)
+ goto out;
+
+ softif_neigh = softif_neigh_get_selected(softif_neigh_vid);
+out:
+ if (softif_neigh_vid)
+ softif_neigh_vid_free_ref(softif_neigh_vid);
+ return softif_neigh;
+}
+
+static void softif_neigh_vid_select(struct bat_priv *bat_priv,
+ struct softif_neigh *new_neigh,
+ short vid)
+{
+ struct softif_neigh_vid *softif_neigh_vid;
+ struct softif_neigh *curr_neigh;
+
+ softif_neigh_vid = softif_neigh_vid_get(bat_priv, vid);
+ if (!softif_neigh_vid)
+ goto out;
+
+ spin_lock_bh(&bat_priv->softif_neigh_lock);
+
+ if (new_neigh && !atomic_inc_not_zero(&new_neigh->refcount))
+ new_neigh = NULL;
+
+ curr_neigh = softif_neigh_vid->softif_neigh;
+ rcu_assign_pointer(softif_neigh_vid->softif_neigh, new_neigh);
+
+ if ((curr_neigh) && (!new_neigh))
+ bat_dbg(DBG_ROUTES, bat_priv,
+ "Removing mesh exit point on vid: %d (prev: %pM).\n",
+ vid, curr_neigh->addr);
+ else if ((curr_neigh) && (new_neigh))
+ bat_dbg(DBG_ROUTES, bat_priv,
+ "Changing mesh exit point on vid: %d from %pM "
+ "to %pM.\n", vid, curr_neigh->addr, new_neigh->addr);
+ else if ((!curr_neigh) && (new_neigh))
+ bat_dbg(DBG_ROUTES, bat_priv,
+ "Setting mesh exit point on vid: %d to %pM.\n",
+ vid, new_neigh->addr);
+
+ if (curr_neigh)
+ softif_neigh_free_ref(curr_neigh);
+
spin_unlock_bh(&bat_priv->softif_neigh_lock);
out:
+ if (softif_neigh_vid)
+ softif_neigh_vid_free_ref(softif_neigh_vid);
+}
+
+static void softif_neigh_vid_deselect(struct bat_priv *bat_priv,
+ struct softif_neigh_vid *softif_neigh_vid)
+{
+ struct softif_neigh *curr_neigh;
+ struct softif_neigh *softif_neigh = NULL, *softif_neigh_tmp;
+ struct hard_iface *primary_if = NULL;
+ struct hlist_node *node;
+
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ goto out;
+
+ /* find new softif_neigh immediately to avoid temporary loops */
+ rcu_read_lock();
+ curr_neigh = rcu_dereference(softif_neigh_vid->softif_neigh);
+
+ hlist_for_each_entry_rcu(softif_neigh_tmp, node,
+ &softif_neigh_vid->softif_neigh_list,
+ list) {
+ if (softif_neigh_tmp == curr_neigh)
+ continue;
+
+ /* we got a neighbor but its mac is 'bigger' than ours */
+ if (memcmp(primary_if->net_dev->dev_addr,
+ softif_neigh_tmp->addr, ETH_ALEN) < 0)
+ continue;
+
+ if (!atomic_inc_not_zero(&softif_neigh_tmp->refcount))
+ continue;
+
+ softif_neigh = softif_neigh_tmp;
+ goto unlock;
+ }
+
+unlock:
rcu_read_unlock();
- return softif_neigh;
+out:
+ softif_neigh_vid_select(bat_priv, softif_neigh, softif_neigh_vid->vid);
+
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ if (softif_neigh)
+ softif_neigh_free_ref(softif_neigh);
}
int softif_neigh_seq_print_text(struct seq_file *seq, void *offset)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct bat_priv *bat_priv = netdev_priv(net_dev);
+ struct softif_neigh_vid *softif_neigh_vid;
struct softif_neigh *softif_neigh;
- struct hlist_node *node;
+ struct hard_iface *primary_if;
+ struct hlist_node *node, *node_tmp;
+ struct softif_neigh *curr_softif_neigh;
+ int ret = 0, last_seen_secs, last_seen_msecs;
- if (!bat_priv->primary_if) {
- return seq_printf(seq, "BATMAN mesh %s disabled - "
- "please specify interfaces to enable it\n",
- net_dev->name);
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+ "please specify interfaces to enable it\n",
+ net_dev->name);
+ goto out;
+ }
+
+ if (primary_if->if_status != IF_ACTIVE) {
+ ret = seq_printf(seq, "BATMAN mesh %s "
+ "disabled - primary interface not active\n",
+ net_dev->name);
+ goto out;
}
seq_printf(seq, "Softif neighbor list (%s)\n", net_dev->name);
rcu_read_lock();
- hlist_for_each_entry_rcu(softif_neigh, node,
- &bat_priv->softif_neigh_list, list)
- seq_printf(seq, "%s %pM (vid: %d)\n",
- bat_priv->softif_neigh == softif_neigh
- ? "=>" : " ", softif_neigh->addr,
- softif_neigh->vid);
+ hlist_for_each_entry_rcu(softif_neigh_vid, node,
+ &bat_priv->softif_neigh_vids, list) {
+ seq_printf(seq, " %-15s %s on vid: %d\n",
+ "Originator", "last-seen", softif_neigh_vid->vid);
+
+ curr_softif_neigh = softif_neigh_get_selected(softif_neigh_vid);
+
+ hlist_for_each_entry_rcu(softif_neigh, node_tmp,
+ &softif_neigh_vid->softif_neigh_list,
+ list) {
+ last_seen_secs = jiffies_to_msecs(jiffies -
+ softif_neigh->last_seen) / 1000;
+ last_seen_msecs = jiffies_to_msecs(jiffies -
+ softif_neigh->last_seen) % 1000;
+ seq_printf(seq, "%s %pM %3i.%03is\n",
+ curr_softif_neigh == softif_neigh
+ ? "=>" : " ", softif_neigh->addr,
+ last_seen_secs, last_seen_msecs);
+ }
+
+ if (curr_softif_neigh)
+ softif_neigh_free_ref(curr_softif_neigh);
+
+ seq_printf(seq, "\n");
+ }
rcu_read_unlock();
- return 0;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
+}
+
+void softif_neigh_purge(struct bat_priv *bat_priv)
+{
+ struct softif_neigh *softif_neigh, *curr_softif_neigh;
+ struct softif_neigh_vid *softif_neigh_vid;
+ struct hlist_node *node, *node_tmp, *node_tmp2;
+ char do_deselect;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(softif_neigh_vid, node,
+ &bat_priv->softif_neigh_vids, list) {
+ if (!atomic_inc_not_zero(&softif_neigh_vid->refcount))
+ continue;
+
+ curr_softif_neigh = softif_neigh_get_selected(softif_neigh_vid);
+ do_deselect = 0;
+
+ spin_lock_bh(&bat_priv->softif_neigh_lock);
+ hlist_for_each_entry_safe(softif_neigh, node_tmp, node_tmp2,
+ &softif_neigh_vid->softif_neigh_list,
+ list) {
+ if ((!time_after(jiffies, softif_neigh->last_seen +
+ msecs_to_jiffies(SOFTIF_NEIGH_TIMEOUT))) &&
+ (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE))
+ continue;
+
+ if (curr_softif_neigh == softif_neigh) {
+ bat_dbg(DBG_ROUTES, bat_priv,
+ "Current mesh exit point on vid: %d "
+ "'%pM' vanished.\n",
+ softif_neigh_vid->vid,
+ softif_neigh->addr);
+ do_deselect = 1;
+ }
+
+ hlist_del_rcu(&softif_neigh->list);
+ softif_neigh_free_ref(softif_neigh);
+ }
+ spin_unlock_bh(&bat_priv->softif_neigh_lock);
+
+ /* soft_neigh_vid_deselect() needs to acquire the
+ * softif_neigh_lock */
+ if (do_deselect)
+ softif_neigh_vid_deselect(bat_priv, softif_neigh_vid);
+
+ if (curr_softif_neigh)
+ softif_neigh_free_ref(curr_softif_neigh);
+
+ softif_neigh_vid_free_ref(softif_neigh_vid);
+ }
+ rcu_read_unlock();
+
+ spin_lock_bh(&bat_priv->softif_neigh_vid_lock);
+ hlist_for_each_entry_safe(softif_neigh_vid, node, node_tmp,
+ &bat_priv->softif_neigh_vids, list) {
+ if (!hlist_empty(&softif_neigh_vid->softif_neigh_list))
+ continue;
+
+ hlist_del_rcu(&softif_neigh_vid->list);
+ softif_neigh_vid_free_ref(softif_neigh_vid);
+ }
+ spin_unlock_bh(&bat_priv->softif_neigh_vid_lock);
+
}
static void softif_batman_recv(struct sk_buff *skb, struct net_device *dev,
@@ -198,7 +445,9 @@
struct bat_priv *bat_priv = netdev_priv(dev);
struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
struct batman_packet *batman_packet;
- struct softif_neigh *softif_neigh, *softif_neigh_tmp;
+ struct softif_neigh *softif_neigh = NULL;
+ struct hard_iface *primary_if = NULL;
+ struct softif_neigh *curr_softif_neigh = NULL;
if (ntohs(ethhdr->h_proto) == ETH_P_8021Q)
batman_packet = (struct batman_packet *)
@@ -207,63 +456,52 @@
batman_packet = (struct batman_packet *)(skb->data + ETH_HLEN);
if (batman_packet->version != COMPAT_VERSION)
- goto err;
+ goto out;
if (batman_packet->packet_type != BAT_PACKET)
- goto err;
+ goto out;
if (!(batman_packet->flags & PRIMARIES_FIRST_HOP))
- goto err;
+ goto out;
if (is_my_mac(batman_packet->orig))
- goto err;
+ goto out;
softif_neigh = softif_neigh_get(bat_priv, batman_packet->orig, vid);
-
if (!softif_neigh)
- goto err;
+ goto out;
- if (bat_priv->softif_neigh == softif_neigh)
+ curr_softif_neigh = softif_neigh_vid_get_selected(bat_priv, vid);
+ if (curr_softif_neigh == softif_neigh)
+ goto out;
+
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
goto out;
/* we got a neighbor but its mac is 'bigger' than ours */
- if (memcmp(bat_priv->primary_if->net_dev->dev_addr,
+ if (memcmp(primary_if->net_dev->dev_addr,
softif_neigh->addr, ETH_ALEN) < 0)
goto out;
- /* switch to new 'smallest neighbor' */
- if ((bat_priv->softif_neigh) &&
- (memcmp(softif_neigh->addr, bat_priv->softif_neigh->addr,
- ETH_ALEN) < 0)) {
- bat_dbg(DBG_ROUTES, bat_priv,
- "Changing mesh exit point from %pM (vid: %d) "
- "to %pM (vid: %d).\n",
- bat_priv->softif_neigh->addr,
- bat_priv->softif_neigh->vid,
- softif_neigh->addr, softif_neigh->vid);
- softif_neigh_tmp = bat_priv->softif_neigh;
- bat_priv->softif_neigh = softif_neigh;
- softif_neigh_free_ref(softif_neigh_tmp);
- /* we need to hold the additional reference */
- goto err;
+ /* close own batX device and use softif_neigh as exit node */
+ if (!curr_softif_neigh) {
+ softif_neigh_vid_select(bat_priv, softif_neigh, vid);
+ goto out;
}
- /* close own batX device and use softif_neigh as exit node */
- if ((!bat_priv->softif_neigh) &&
- (memcmp(softif_neigh->addr,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN) < 0)) {
- bat_dbg(DBG_ROUTES, bat_priv,
- "Setting mesh exit point to %pM (vid: %d).\n",
- softif_neigh->addr, softif_neigh->vid);
- bat_priv->softif_neigh = softif_neigh;
- /* we need to hold the additional reference */
- goto err;
- }
+ /* switch to new 'smallest neighbor' */
+ if (memcmp(softif_neigh->addr, curr_softif_neigh->addr, ETH_ALEN) < 0)
+ softif_neigh_vid_select(bat_priv, softif_neigh, vid);
out:
- softif_neigh_free_ref(softif_neigh);
-err:
kfree_skb(skb);
+ if (softif_neigh)
+ softif_neigh_free_ref(softif_neigh);
+ if (curr_softif_neigh)
+ softif_neigh_free_ref(curr_softif_neigh);
+ if (primary_if)
+ hardif_free_ref(primary_if);
return;
}
@@ -293,11 +531,11 @@
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- /* only modify hna-table if it has been initialised before */
+ /* only modify transtable if it has been initialised before */
if (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE) {
- hna_local_remove(bat_priv, dev->dev_addr,
+ tt_local_remove(bat_priv, dev->dev_addr,
"mac address changed");
- hna_local_add(dev, addr->sa_data);
+ tt_local_add(dev, addr->sa_data);
}
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
@@ -319,8 +557,10 @@
{
struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
struct bat_priv *bat_priv = netdev_priv(soft_iface);
+ struct hard_iface *primary_if = NULL;
struct bcast_packet *bcast_packet;
struct vlan_ethhdr *vhdr;
+ struct softif_neigh *curr_softif_neigh = NULL;
int data_len = skb->len, ret;
short vid = -1;
bool do_bcast = false;
@@ -348,11 +588,12 @@
* if we have a another chosen mesh exit node in range
* it will transport the packets to the mesh
*/
- if ((bat_priv->softif_neigh) && (bat_priv->softif_neigh->vid == vid))
+ curr_softif_neigh = softif_neigh_vid_get_selected(bat_priv, vid);
+ if (curr_softif_neigh)
goto dropped;
/* TODO: check this for locks */
- hna_local_add(soft_iface, ethhdr->h_source);
+ tt_local_add(soft_iface, ethhdr->h_source);
if (is_multicast_ether_addr(ethhdr->h_dest)) {
ret = gw_is_target(bat_priv, skb);
@@ -366,7 +607,8 @@
/* ethernet packet should be broadcasted */
if (do_bcast) {
- if (!bat_priv->primary_if)
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
goto dropped;
if (my_skb_head_push(skb, sizeof(struct bcast_packet)) < 0)
@@ -382,7 +624,7 @@
/* hw address of first interface is the orig mac because only
* this mac is known throughout the mesh */
memcpy(bcast_packet->orig,
- bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ primary_if->net_dev->dev_addr, ETH_ALEN);
/* set broadcast sequence number */
bcast_packet->seqno =
@@ -410,6 +652,10 @@
dropped_freed:
bat_priv->stats.tx_dropped++;
end:
+ if (curr_softif_neigh)
+ softif_neigh_free_ref(curr_softif_neigh);
+ if (primary_if)
+ hardif_free_ref(primary_if);
return NETDEV_TX_OK;
}
@@ -421,6 +667,7 @@
struct unicast_packet *unicast_packet;
struct ethhdr *ethhdr;
struct vlan_ethhdr *vhdr;
+ struct softif_neigh *curr_softif_neigh = NULL;
short vid = -1;
int ret;
@@ -450,7 +697,8 @@
* if we have a another chosen mesh exit node in range
* it will transport the packets to the non-mesh network
*/
- if ((bat_priv->softif_neigh) && (bat_priv->softif_neigh->vid == vid)) {
+ curr_softif_neigh = softif_neigh_vid_get_selected(bat_priv, vid);
+ if (curr_softif_neigh) {
skb_push(skb, hdr_size);
unicast_packet = (struct unicast_packet *)skb->data;
@@ -461,7 +709,7 @@
skb_reset_mac_header(skb);
memcpy(unicast_packet->dest,
- bat_priv->softif_neigh->addr, ETH_ALEN);
+ curr_softif_neigh->addr, ETH_ALEN);
ret = route_unicast_packet(skb, recv_if);
if (ret == NET_RX_DROP)
goto dropped;
@@ -486,11 +734,13 @@
soft_iface->last_rx = jiffies;
netif_rx(skb);
- return;
+ goto out;
dropped:
kfree_skb(skb);
out:
+ if (curr_softif_neigh)
+ softif_neigh_free_ref(curr_softif_neigh);
return;
}
@@ -524,14 +774,15 @@
dev->hard_start_xmit = interface_tx;
#endif
dev->destructor = free_netdev;
+ dev->tx_queue_len = 0;
/**
* can't call min_mtu, because the needed variables
* have not been initialized yet
*/
dev->mtu = ETH_DATA_LEN;
- dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the
- * skbuff for our header */
+ /* reserve more space in the skbuff for our header */
+ dev->hard_header_len = BAT_HEADER_LEN;
/* generate random address */
random_ether_addr(dev_addr);
@@ -556,7 +807,7 @@
goto out;
}
- ret = register_netdev(soft_iface);
+ ret = register_netdevice(soft_iface);
if (ret < 0) {
pr_err("Unable to register the batman interface '%s': %i\n",
name, ret);
@@ -580,11 +831,10 @@
atomic_set(&bat_priv->mesh_state, MESH_INACTIVE);
atomic_set(&bat_priv->bcast_seqno, 1);
- atomic_set(&bat_priv->hna_local_changed, 0);
+ atomic_set(&bat_priv->tt_local_changed, 0);
bat_priv->primary_if = NULL;
bat_priv->num_ifaces = 0;
- bat_priv->softif_neigh = NULL;
ret = sysfs_add_meshif(soft_iface);
if (ret < 0)
@@ -640,7 +890,7 @@
{
cmd->supported = 0;
cmd->advertising = 0;
- cmd->speed = SPEED_10;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_TP;
cmd->phy_address = 0;
@@ -675,12 +925,3 @@
return 1;
}
-static u32 bat_get_rx_csum(struct net_device *dev)
-{
- return 0;
-}
-
-static int bat_set_rx_csum(struct net_device *dev, u32 data)
-{
- return -EOPNOTSUPP;
-}
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 8d15b48..7b72966 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -22,43 +22,44 @@
#include "main.h"
#include "translation-table.h"
#include "soft-interface.h"
+#include "hard-interface.h"
#include "hash.h"
#include "originator.h"
-static void hna_local_purge(struct work_struct *work);
-static void _hna_global_del_orig(struct bat_priv *bat_priv,
- struct hna_global_entry *hna_global_entry,
+static void tt_local_purge(struct work_struct *work);
+static void _tt_global_del_orig(struct bat_priv *bat_priv,
+ struct tt_global_entry *tt_global_entry,
char *message);
/* returns 1 if they are the same mac addr */
-static int compare_lhna(struct hlist_node *node, void *data2)
+static int compare_ltt(struct hlist_node *node, void *data2)
{
- void *data1 = container_of(node, struct hna_local_entry, hash_entry);
+ void *data1 = container_of(node, struct tt_local_entry, hash_entry);
return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
}
/* returns 1 if they are the same mac addr */
-static int compare_ghna(struct hlist_node *node, void *data2)
+static int compare_gtt(struct hlist_node *node, void *data2)
{
- void *data1 = container_of(node, struct hna_global_entry, hash_entry);
+ void *data1 = container_of(node, struct tt_global_entry, hash_entry);
return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
}
-static void hna_local_start_timer(struct bat_priv *bat_priv)
+static void tt_local_start_timer(struct bat_priv *bat_priv)
{
- INIT_DELAYED_WORK(&bat_priv->hna_work, hna_local_purge);
- queue_delayed_work(bat_event_workqueue, &bat_priv->hna_work, 10 * HZ);
+ INIT_DELAYED_WORK(&bat_priv->tt_work, tt_local_purge);
+ queue_delayed_work(bat_event_workqueue, &bat_priv->tt_work, 10 * HZ);
}
-static struct hna_local_entry *hna_local_hash_find(struct bat_priv *bat_priv,
+static struct tt_local_entry *tt_local_hash_find(struct bat_priv *bat_priv,
void *data)
{
- struct hashtable_t *hash = bat_priv->hna_local_hash;
+ struct hashtable_t *hash = bat_priv->tt_local_hash;
struct hlist_head *head;
struct hlist_node *node;
- struct hna_local_entry *hna_local_entry, *hna_local_entry_tmp = NULL;
+ struct tt_local_entry *tt_local_entry, *tt_local_entry_tmp = NULL;
int index;
if (!hash)
@@ -68,26 +69,26 @@
head = &hash->table[index];
rcu_read_lock();
- hlist_for_each_entry_rcu(hna_local_entry, node, head, hash_entry) {
- if (!compare_eth(hna_local_entry, data))
+ hlist_for_each_entry_rcu(tt_local_entry, node, head, hash_entry) {
+ if (!compare_eth(tt_local_entry, data))
continue;
- hna_local_entry_tmp = hna_local_entry;
+ tt_local_entry_tmp = tt_local_entry;
break;
}
rcu_read_unlock();
- return hna_local_entry_tmp;
+ return tt_local_entry_tmp;
}
-static struct hna_global_entry *hna_global_hash_find(struct bat_priv *bat_priv,
+static struct tt_global_entry *tt_global_hash_find(struct bat_priv *bat_priv,
void *data)
{
- struct hashtable_t *hash = bat_priv->hna_global_hash;
+ struct hashtable_t *hash = bat_priv->tt_global_hash;
struct hlist_head *head;
struct hlist_node *node;
- struct hna_global_entry *hna_global_entry;
- struct hna_global_entry *hna_global_entry_tmp = NULL;
+ struct tt_global_entry *tt_global_entry;
+ struct tt_global_entry *tt_global_entry_tmp = NULL;
int index;
if (!hash)
@@ -97,125 +98,125 @@
head = &hash->table[index];
rcu_read_lock();
- hlist_for_each_entry_rcu(hna_global_entry, node, head, hash_entry) {
- if (!compare_eth(hna_global_entry, data))
+ hlist_for_each_entry_rcu(tt_global_entry, node, head, hash_entry) {
+ if (!compare_eth(tt_global_entry, data))
continue;
- hna_global_entry_tmp = hna_global_entry;
+ tt_global_entry_tmp = tt_global_entry;
break;
}
rcu_read_unlock();
- return hna_global_entry_tmp;
+ return tt_global_entry_tmp;
}
-int hna_local_init(struct bat_priv *bat_priv)
+int tt_local_init(struct bat_priv *bat_priv)
{
- if (bat_priv->hna_local_hash)
+ if (bat_priv->tt_local_hash)
return 1;
- bat_priv->hna_local_hash = hash_new(1024);
+ bat_priv->tt_local_hash = hash_new(1024);
- if (!bat_priv->hna_local_hash)
+ if (!bat_priv->tt_local_hash)
return 0;
- atomic_set(&bat_priv->hna_local_changed, 0);
- hna_local_start_timer(bat_priv);
+ atomic_set(&bat_priv->tt_local_changed, 0);
+ tt_local_start_timer(bat_priv);
return 1;
}
-void hna_local_add(struct net_device *soft_iface, uint8_t *addr)
+void tt_local_add(struct net_device *soft_iface, uint8_t *addr)
{
struct bat_priv *bat_priv = netdev_priv(soft_iface);
- struct hna_local_entry *hna_local_entry;
- struct hna_global_entry *hna_global_entry;
+ struct tt_local_entry *tt_local_entry;
+ struct tt_global_entry *tt_global_entry;
int required_bytes;
- spin_lock_bh(&bat_priv->hna_lhash_lock);
- hna_local_entry = hna_local_hash_find(bat_priv, addr);
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
+ tt_local_entry = tt_local_hash_find(bat_priv, addr);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
- if (hna_local_entry) {
- hna_local_entry->last_seen = jiffies;
+ if (tt_local_entry) {
+ tt_local_entry->last_seen = jiffies;
return;
}
/* only announce as many hosts as possible in the batman-packet and
- space in batman_packet->num_hna That also should give a limit to
+ space in batman_packet->num_tt That also should give a limit to
MAC-flooding. */
- required_bytes = (bat_priv->num_local_hna + 1) * ETH_ALEN;
+ required_bytes = (bat_priv->num_local_tt + 1) * ETH_ALEN;
required_bytes += BAT_PACKET_LEN;
if ((required_bytes > ETH_DATA_LEN) ||
(atomic_read(&bat_priv->aggregated_ogms) &&
required_bytes > MAX_AGGREGATION_BYTES) ||
- (bat_priv->num_local_hna + 1 > 255)) {
+ (bat_priv->num_local_tt + 1 > 255)) {
bat_dbg(DBG_ROUTES, bat_priv,
- "Can't add new local hna entry (%pM): "
- "number of local hna entries exceeds packet size\n",
+ "Can't add new local tt entry (%pM): "
+ "number of local tt entries exceeds packet size\n",
addr);
return;
}
bat_dbg(DBG_ROUTES, bat_priv,
- "Creating new local hna entry: %pM\n", addr);
+ "Creating new local tt entry: %pM\n", addr);
- hna_local_entry = kmalloc(sizeof(struct hna_local_entry), GFP_ATOMIC);
- if (!hna_local_entry)
+ tt_local_entry = kmalloc(sizeof(struct tt_local_entry), GFP_ATOMIC);
+ if (!tt_local_entry)
return;
- memcpy(hna_local_entry->addr, addr, ETH_ALEN);
- hna_local_entry->last_seen = jiffies;
+ memcpy(tt_local_entry->addr, addr, ETH_ALEN);
+ tt_local_entry->last_seen = jiffies;
/* the batman interface mac address should never be purged */
if (compare_eth(addr, soft_iface->dev_addr))
- hna_local_entry->never_purge = 1;
+ tt_local_entry->never_purge = 1;
else
- hna_local_entry->never_purge = 0;
+ tt_local_entry->never_purge = 0;
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
- hash_add(bat_priv->hna_local_hash, compare_lhna, choose_orig,
- hna_local_entry, &hna_local_entry->hash_entry);
- bat_priv->num_local_hna++;
- atomic_set(&bat_priv->hna_local_changed, 1);
+ hash_add(bat_priv->tt_local_hash, compare_ltt, choose_orig,
+ tt_local_entry, &tt_local_entry->hash_entry);
+ bat_priv->num_local_tt++;
+ atomic_set(&bat_priv->tt_local_changed, 1);
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
/* remove address from global hash if present */
- spin_lock_bh(&bat_priv->hna_ghash_lock);
+ spin_lock_bh(&bat_priv->tt_ghash_lock);
- hna_global_entry = hna_global_hash_find(bat_priv, addr);
+ tt_global_entry = tt_global_hash_find(bat_priv, addr);
- if (hna_global_entry)
- _hna_global_del_orig(bat_priv, hna_global_entry,
- "local hna received");
+ if (tt_global_entry)
+ _tt_global_del_orig(bat_priv, tt_global_entry,
+ "local tt received");
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
}
-int hna_local_fill_buffer(struct bat_priv *bat_priv,
+int tt_local_fill_buffer(struct bat_priv *bat_priv,
unsigned char *buff, int buff_len)
{
- struct hashtable_t *hash = bat_priv->hna_local_hash;
- struct hna_local_entry *hna_local_entry;
+ struct hashtable_t *hash = bat_priv->tt_local_hash;
+ struct tt_local_entry *tt_local_entry;
struct hlist_node *node;
struct hlist_head *head;
int i, count = 0;
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
rcu_read_lock();
- hlist_for_each_entry_rcu(hna_local_entry, node,
+ hlist_for_each_entry_rcu(tt_local_entry, node,
head, hash_entry) {
if (buff_len < (count + 1) * ETH_ALEN)
break;
- memcpy(buff + (count * ETH_ALEN), hna_local_entry->addr,
+ memcpy(buff + (count * ETH_ALEN), tt_local_entry->addr,
ETH_ALEN);
count++;
@@ -223,37 +224,47 @@
rcu_read_unlock();
}
- /* if we did not get all new local hnas see you next time ;-) */
- if (count == bat_priv->num_local_hna)
- atomic_set(&bat_priv->hna_local_changed, 0);
+ /* if we did not get all new local tts see you next time ;-) */
+ if (count == bat_priv->num_local_tt)
+ atomic_set(&bat_priv->tt_local_changed, 0);
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
return count;
}
-int hna_local_seq_print_text(struct seq_file *seq, void *offset)
+int tt_local_seq_print_text(struct seq_file *seq, void *offset)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct bat_priv *bat_priv = netdev_priv(net_dev);
- struct hashtable_t *hash = bat_priv->hna_local_hash;
- struct hna_local_entry *hna_local_entry;
+ struct hashtable_t *hash = bat_priv->tt_local_hash;
+ struct tt_local_entry *tt_local_entry;
+ struct hard_iface *primary_if;
struct hlist_node *node;
struct hlist_head *head;
size_t buf_size, pos;
char *buff;
- int i;
+ int i, ret = 0;
- if (!bat_priv->primary_if) {
- return seq_printf(seq, "BATMAN mesh %s disabled - "
- "please specify interfaces to enable it\n",
- net_dev->name);
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+ "please specify interfaces to enable it\n",
+ net_dev->name);
+ goto out;
+ }
+
+ if (primary_if->if_status != IF_ACTIVE) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+ "primary interface not active\n",
+ net_dev->name);
+ goto out;
}
seq_printf(seq, "Locally retrieved addresses (from %s) "
- "announced via HNA:\n",
+ "announced via TT:\n",
net_dev->name);
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
buf_size = 1;
/* Estimate length for: " * xx:xx:xx:xx:xx:xx\n" */
@@ -268,8 +279,9 @@
buff = kmalloc(buf_size, GFP_ATOMIC);
if (!buff) {
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
- return -ENOMEM;
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
+ ret = -ENOMEM;
+ goto out;
}
buff[0] = '\0';
@@ -279,211 +291,225 @@
head = &hash->table[i];
rcu_read_lock();
- hlist_for_each_entry_rcu(hna_local_entry, node,
+ hlist_for_each_entry_rcu(tt_local_entry, node,
head, hash_entry) {
pos += snprintf(buff + pos, 22, " * %pM\n",
- hna_local_entry->addr);
+ tt_local_entry->addr);
}
rcu_read_unlock();
}
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
seq_printf(seq, "%s", buff);
kfree(buff);
- return 0;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
}
-static void _hna_local_del(struct hlist_node *node, void *arg)
+static void _tt_local_del(struct hlist_node *node, void *arg)
{
struct bat_priv *bat_priv = (struct bat_priv *)arg;
- void *data = container_of(node, struct hna_local_entry, hash_entry);
+ void *data = container_of(node, struct tt_local_entry, hash_entry);
kfree(data);
- bat_priv->num_local_hna--;
- atomic_set(&bat_priv->hna_local_changed, 1);
+ bat_priv->num_local_tt--;
+ atomic_set(&bat_priv->tt_local_changed, 1);
}
-static void hna_local_del(struct bat_priv *bat_priv,
- struct hna_local_entry *hna_local_entry,
+static void tt_local_del(struct bat_priv *bat_priv,
+ struct tt_local_entry *tt_local_entry,
char *message)
{
- bat_dbg(DBG_ROUTES, bat_priv, "Deleting local hna entry (%pM): %s\n",
- hna_local_entry->addr, message);
+ bat_dbg(DBG_ROUTES, bat_priv, "Deleting local tt entry (%pM): %s\n",
+ tt_local_entry->addr, message);
- hash_remove(bat_priv->hna_local_hash, compare_lhna, choose_orig,
- hna_local_entry->addr);
- _hna_local_del(&hna_local_entry->hash_entry, bat_priv);
+ hash_remove(bat_priv->tt_local_hash, compare_ltt, choose_orig,
+ tt_local_entry->addr);
+ _tt_local_del(&tt_local_entry->hash_entry, bat_priv);
}
-void hna_local_remove(struct bat_priv *bat_priv,
+void tt_local_remove(struct bat_priv *bat_priv,
uint8_t *addr, char *message)
{
- struct hna_local_entry *hna_local_entry;
+ struct tt_local_entry *tt_local_entry;
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
- hna_local_entry = hna_local_hash_find(bat_priv, addr);
+ tt_local_entry = tt_local_hash_find(bat_priv, addr);
- if (hna_local_entry)
- hna_local_del(bat_priv, hna_local_entry, message);
+ if (tt_local_entry)
+ tt_local_del(bat_priv, tt_local_entry, message);
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
}
-static void hna_local_purge(struct work_struct *work)
+static void tt_local_purge(struct work_struct *work)
{
struct delayed_work *delayed_work =
container_of(work, struct delayed_work, work);
struct bat_priv *bat_priv =
- container_of(delayed_work, struct bat_priv, hna_work);
- struct hashtable_t *hash = bat_priv->hna_local_hash;
- struct hna_local_entry *hna_local_entry;
+ container_of(delayed_work, struct bat_priv, tt_work);
+ struct hashtable_t *hash = bat_priv->tt_local_hash;
+ struct tt_local_entry *tt_local_entry;
struct hlist_node *node, *node_tmp;
struct hlist_head *head;
unsigned long timeout;
int i;
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
- hlist_for_each_entry_safe(hna_local_entry, node, node_tmp,
+ hlist_for_each_entry_safe(tt_local_entry, node, node_tmp,
head, hash_entry) {
- if (hna_local_entry->never_purge)
+ if (tt_local_entry->never_purge)
continue;
- timeout = hna_local_entry->last_seen;
- timeout += LOCAL_HNA_TIMEOUT * HZ;
+ timeout = tt_local_entry->last_seen;
+ timeout += TT_LOCAL_TIMEOUT * HZ;
if (time_before(jiffies, timeout))
continue;
- hna_local_del(bat_priv, hna_local_entry,
+ tt_local_del(bat_priv, tt_local_entry,
"address timed out");
}
}
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
- hna_local_start_timer(bat_priv);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
+ tt_local_start_timer(bat_priv);
}
-void hna_local_free(struct bat_priv *bat_priv)
+void tt_local_free(struct bat_priv *bat_priv)
{
- if (!bat_priv->hna_local_hash)
+ if (!bat_priv->tt_local_hash)
return;
- cancel_delayed_work_sync(&bat_priv->hna_work);
- hash_delete(bat_priv->hna_local_hash, _hna_local_del, bat_priv);
- bat_priv->hna_local_hash = NULL;
+ cancel_delayed_work_sync(&bat_priv->tt_work);
+ hash_delete(bat_priv->tt_local_hash, _tt_local_del, bat_priv);
+ bat_priv->tt_local_hash = NULL;
}
-int hna_global_init(struct bat_priv *bat_priv)
+int tt_global_init(struct bat_priv *bat_priv)
{
- if (bat_priv->hna_global_hash)
+ if (bat_priv->tt_global_hash)
return 1;
- bat_priv->hna_global_hash = hash_new(1024);
+ bat_priv->tt_global_hash = hash_new(1024);
- if (!bat_priv->hna_global_hash)
+ if (!bat_priv->tt_global_hash)
return 0;
return 1;
}
-void hna_global_add_orig(struct bat_priv *bat_priv,
+void tt_global_add_orig(struct bat_priv *bat_priv,
struct orig_node *orig_node,
- unsigned char *hna_buff, int hna_buff_len)
+ unsigned char *tt_buff, int tt_buff_len)
{
- struct hna_global_entry *hna_global_entry;
- struct hna_local_entry *hna_local_entry;
- int hna_buff_count = 0;
- unsigned char *hna_ptr;
+ struct tt_global_entry *tt_global_entry;
+ struct tt_local_entry *tt_local_entry;
+ int tt_buff_count = 0;
+ unsigned char *tt_ptr;
- while ((hna_buff_count + 1) * ETH_ALEN <= hna_buff_len) {
- spin_lock_bh(&bat_priv->hna_ghash_lock);
+ while ((tt_buff_count + 1) * ETH_ALEN <= tt_buff_len) {
+ spin_lock_bh(&bat_priv->tt_ghash_lock);
- hna_ptr = hna_buff + (hna_buff_count * ETH_ALEN);
- hna_global_entry = hna_global_hash_find(bat_priv, hna_ptr);
+ tt_ptr = tt_buff + (tt_buff_count * ETH_ALEN);
+ tt_global_entry = tt_global_hash_find(bat_priv, tt_ptr);
- if (!hna_global_entry) {
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
+ if (!tt_global_entry) {
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
- hna_global_entry =
- kmalloc(sizeof(struct hna_global_entry),
+ tt_global_entry =
+ kmalloc(sizeof(struct tt_global_entry),
GFP_ATOMIC);
- if (!hna_global_entry)
+ if (!tt_global_entry)
break;
- memcpy(hna_global_entry->addr, hna_ptr, ETH_ALEN);
+ memcpy(tt_global_entry->addr, tt_ptr, ETH_ALEN);
bat_dbg(DBG_ROUTES, bat_priv,
- "Creating new global hna entry: "
+ "Creating new global tt entry: "
"%pM (via %pM)\n",
- hna_global_entry->addr, orig_node->orig);
+ tt_global_entry->addr, orig_node->orig);
- spin_lock_bh(&bat_priv->hna_ghash_lock);
- hash_add(bat_priv->hna_global_hash, compare_ghna,
- choose_orig, hna_global_entry,
- &hna_global_entry->hash_entry);
+ spin_lock_bh(&bat_priv->tt_ghash_lock);
+ hash_add(bat_priv->tt_global_hash, compare_gtt,
+ choose_orig, tt_global_entry,
+ &tt_global_entry->hash_entry);
}
- hna_global_entry->orig_node = orig_node;
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
+ tt_global_entry->orig_node = orig_node;
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
/* remove address from local hash if present */
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
- hna_ptr = hna_buff + (hna_buff_count * ETH_ALEN);
- hna_local_entry = hna_local_hash_find(bat_priv, hna_ptr);
+ tt_ptr = tt_buff + (tt_buff_count * ETH_ALEN);
+ tt_local_entry = tt_local_hash_find(bat_priv, tt_ptr);
- if (hna_local_entry)
- hna_local_del(bat_priv, hna_local_entry,
- "global hna received");
+ if (tt_local_entry)
+ tt_local_del(bat_priv, tt_local_entry,
+ "global tt received");
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
- hna_buff_count++;
+ tt_buff_count++;
}
/* initialize, and overwrite if malloc succeeds */
- orig_node->hna_buff = NULL;
- orig_node->hna_buff_len = 0;
+ orig_node->tt_buff = NULL;
+ orig_node->tt_buff_len = 0;
- if (hna_buff_len > 0) {
- orig_node->hna_buff = kmalloc(hna_buff_len, GFP_ATOMIC);
- if (orig_node->hna_buff) {
- memcpy(orig_node->hna_buff, hna_buff, hna_buff_len);
- orig_node->hna_buff_len = hna_buff_len;
+ if (tt_buff_len > 0) {
+ orig_node->tt_buff = kmalloc(tt_buff_len, GFP_ATOMIC);
+ if (orig_node->tt_buff) {
+ memcpy(orig_node->tt_buff, tt_buff, tt_buff_len);
+ orig_node->tt_buff_len = tt_buff_len;
}
}
}
-int hna_global_seq_print_text(struct seq_file *seq, void *offset)
+int tt_global_seq_print_text(struct seq_file *seq, void *offset)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct bat_priv *bat_priv = netdev_priv(net_dev);
- struct hashtable_t *hash = bat_priv->hna_global_hash;
- struct hna_global_entry *hna_global_entry;
+ struct hashtable_t *hash = bat_priv->tt_global_hash;
+ struct tt_global_entry *tt_global_entry;
+ struct hard_iface *primary_if;
struct hlist_node *node;
struct hlist_head *head;
size_t buf_size, pos;
char *buff;
- int i;
+ int i, ret = 0;
- if (!bat_priv->primary_if) {
- return seq_printf(seq, "BATMAN mesh %s disabled - "
- "please specify interfaces to enable it\n",
- net_dev->name);
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - please "
+ "specify interfaces to enable it\n",
+ net_dev->name);
+ goto out;
}
- seq_printf(seq, "Globally announced HNAs received via the mesh %s\n",
+ if (primary_if->if_status != IF_ACTIVE) {
+ ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+ "primary interface not active\n",
+ net_dev->name);
+ goto out;
+ }
+
+ seq_printf(seq,
+ "Globally announced TT entries received via the mesh %s\n",
net_dev->name);
- spin_lock_bh(&bat_priv->hna_ghash_lock);
+ spin_lock_bh(&bat_priv->tt_ghash_lock);
buf_size = 1;
/* Estimate length for: " * xx:xx:xx:xx:xx:xx via xx:xx:xx:xx:xx:xx\n"*/
@@ -498,8 +524,9 @@
buff = kmalloc(buf_size, GFP_ATOMIC);
if (!buff) {
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
- return -ENOMEM;
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
+ ret = -ENOMEM;
+ goto out;
}
buff[0] = '\0';
pos = 0;
@@ -508,101 +535,104 @@
head = &hash->table[i];
rcu_read_lock();
- hlist_for_each_entry_rcu(hna_global_entry, node,
+ hlist_for_each_entry_rcu(tt_global_entry, node,
head, hash_entry) {
pos += snprintf(buff + pos, 44,
" * %pM via %pM\n",
- hna_global_entry->addr,
- hna_global_entry->orig_node->orig);
+ tt_global_entry->addr,
+ tt_global_entry->orig_node->orig);
}
rcu_read_unlock();
}
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
seq_printf(seq, "%s", buff);
kfree(buff);
- return 0;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
}
-static void _hna_global_del_orig(struct bat_priv *bat_priv,
- struct hna_global_entry *hna_global_entry,
+static void _tt_global_del_orig(struct bat_priv *bat_priv,
+ struct tt_global_entry *tt_global_entry,
char *message)
{
bat_dbg(DBG_ROUTES, bat_priv,
- "Deleting global hna entry %pM (via %pM): %s\n",
- hna_global_entry->addr, hna_global_entry->orig_node->orig,
+ "Deleting global tt entry %pM (via %pM): %s\n",
+ tt_global_entry->addr, tt_global_entry->orig_node->orig,
message);
- hash_remove(bat_priv->hna_global_hash, compare_ghna, choose_orig,
- hna_global_entry->addr);
- kfree(hna_global_entry);
+ hash_remove(bat_priv->tt_global_hash, compare_gtt, choose_orig,
+ tt_global_entry->addr);
+ kfree(tt_global_entry);
}
-void hna_global_del_orig(struct bat_priv *bat_priv,
+void tt_global_del_orig(struct bat_priv *bat_priv,
struct orig_node *orig_node, char *message)
{
- struct hna_global_entry *hna_global_entry;
- int hna_buff_count = 0;
- unsigned char *hna_ptr;
+ struct tt_global_entry *tt_global_entry;
+ int tt_buff_count = 0;
+ unsigned char *tt_ptr;
- if (orig_node->hna_buff_len == 0)
+ if (orig_node->tt_buff_len == 0)
return;
- spin_lock_bh(&bat_priv->hna_ghash_lock);
+ spin_lock_bh(&bat_priv->tt_ghash_lock);
- while ((hna_buff_count + 1) * ETH_ALEN <= orig_node->hna_buff_len) {
- hna_ptr = orig_node->hna_buff + (hna_buff_count * ETH_ALEN);
- hna_global_entry = hna_global_hash_find(bat_priv, hna_ptr);
+ while ((tt_buff_count + 1) * ETH_ALEN <= orig_node->tt_buff_len) {
+ tt_ptr = orig_node->tt_buff + (tt_buff_count * ETH_ALEN);
+ tt_global_entry = tt_global_hash_find(bat_priv, tt_ptr);
- if ((hna_global_entry) &&
- (hna_global_entry->orig_node == orig_node))
- _hna_global_del_orig(bat_priv, hna_global_entry,
+ if ((tt_global_entry) &&
+ (tt_global_entry->orig_node == orig_node))
+ _tt_global_del_orig(bat_priv, tt_global_entry,
message);
- hna_buff_count++;
+ tt_buff_count++;
}
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
- orig_node->hna_buff_len = 0;
- kfree(orig_node->hna_buff);
- orig_node->hna_buff = NULL;
+ orig_node->tt_buff_len = 0;
+ kfree(orig_node->tt_buff);
+ orig_node->tt_buff = NULL;
}
-static void hna_global_del(struct hlist_node *node, void *arg)
+static void tt_global_del(struct hlist_node *node, void *arg)
{
- void *data = container_of(node, struct hna_global_entry, hash_entry);
+ void *data = container_of(node, struct tt_global_entry, hash_entry);
kfree(data);
}
-void hna_global_free(struct bat_priv *bat_priv)
+void tt_global_free(struct bat_priv *bat_priv)
{
- if (!bat_priv->hna_global_hash)
+ if (!bat_priv->tt_global_hash)
return;
- hash_delete(bat_priv->hna_global_hash, hna_global_del, NULL);
- bat_priv->hna_global_hash = NULL;
+ hash_delete(bat_priv->tt_global_hash, tt_global_del, NULL);
+ bat_priv->tt_global_hash = NULL;
}
struct orig_node *transtable_search(struct bat_priv *bat_priv, uint8_t *addr)
{
- struct hna_global_entry *hna_global_entry;
+ struct tt_global_entry *tt_global_entry;
struct orig_node *orig_node = NULL;
- spin_lock_bh(&bat_priv->hna_ghash_lock);
- hna_global_entry = hna_global_hash_find(bat_priv, addr);
+ spin_lock_bh(&bat_priv->tt_ghash_lock);
+ tt_global_entry = tt_global_hash_find(bat_priv, addr);
- if (!hna_global_entry)
+ if (!tt_global_entry)
goto out;
- if (!atomic_inc_not_zero(&hna_global_entry->orig_node->refcount))
+ if (!atomic_inc_not_zero(&tt_global_entry->orig_node->refcount))
goto out;
- orig_node = hna_global_entry->orig_node;
+ orig_node = tt_global_entry->orig_node;
out:
- spin_unlock_bh(&bat_priv->hna_ghash_lock);
+ spin_unlock_bh(&bat_priv->tt_ghash_lock);
return orig_node;
}
diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h
index f19931c..46152c3 100644
--- a/net/batman-adv/translation-table.h
+++ b/net/batman-adv/translation-table.h
@@ -22,22 +22,22 @@
#ifndef _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
#define _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
-int hna_local_init(struct bat_priv *bat_priv);
-void hna_local_add(struct net_device *soft_iface, uint8_t *addr);
-void hna_local_remove(struct bat_priv *bat_priv,
+int tt_local_init(struct bat_priv *bat_priv);
+void tt_local_add(struct net_device *soft_iface, uint8_t *addr);
+void tt_local_remove(struct bat_priv *bat_priv,
uint8_t *addr, char *message);
-int hna_local_fill_buffer(struct bat_priv *bat_priv,
+int tt_local_fill_buffer(struct bat_priv *bat_priv,
unsigned char *buff, int buff_len);
-int hna_local_seq_print_text(struct seq_file *seq, void *offset);
-void hna_local_free(struct bat_priv *bat_priv);
-int hna_global_init(struct bat_priv *bat_priv);
-void hna_global_add_orig(struct bat_priv *bat_priv,
+int tt_local_seq_print_text(struct seq_file *seq, void *offset);
+void tt_local_free(struct bat_priv *bat_priv);
+int tt_global_init(struct bat_priv *bat_priv);
+void tt_global_add_orig(struct bat_priv *bat_priv,
struct orig_node *orig_node,
- unsigned char *hna_buff, int hna_buff_len);
-int hna_global_seq_print_text(struct seq_file *seq, void *offset);
-void hna_global_del_orig(struct bat_priv *bat_priv,
+ unsigned char *tt_buff, int tt_buff_len);
+int tt_global_seq_print_text(struct seq_file *seq, void *offset);
+void tt_global_del_orig(struct bat_priv *bat_priv,
struct orig_node *orig_node, char *message);
-void hna_global_free(struct bat_priv *bat_priv);
+void tt_global_free(struct bat_priv *bat_priv);
struct orig_node *transtable_search(struct bat_priv *bat_priv, uint8_t *addr);
#endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 83445cf..fab70e8 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -67,7 +67,7 @@
struct orig_node {
uint8_t orig[ETH_ALEN];
uint8_t primary_addr[ETH_ALEN];
- struct neigh_node *router;
+ struct neigh_node __rcu *router; /* rcu protected pointer */
unsigned long *bcast_own;
uint8_t *bcast_own_sum;
unsigned long last_valid;
@@ -75,25 +75,25 @@
unsigned long batman_seqno_reset;
uint8_t gw_flags;
uint8_t flags;
- unsigned char *hna_buff;
- int16_t hna_buff_len;
+ unsigned char *tt_buff;
+ int16_t tt_buff_len;
uint32_t last_real_seqno;
uint8_t last_ttl;
unsigned long bcast_bits[NUM_WORDS];
uint32_t last_bcast_seqno;
struct hlist_head neigh_list;
struct list_head frag_list;
- spinlock_t neigh_list_lock; /* protects neighbor list */
+ spinlock_t neigh_list_lock; /* protects neigh_list and router */
atomic_t refcount;
struct rcu_head rcu;
struct hlist_node hash_entry;
struct bat_priv *bat_priv;
unsigned long last_frag_packet;
- spinlock_t ogm_cnt_lock; /* protects: bcast_own, bcast_own_sum,
- * neigh_node->real_bits,
- * neigh_node->real_packet_count */
- spinlock_t bcast_seqno_lock; /* protects bcast_bits,
- * last_bcast_seqno */
+ /* ogm_cnt_lock protects: bcast_own, bcast_own_sum,
+ * neigh_node->real_bits, neigh_node->real_packet_count */
+ spinlock_t ogm_cnt_lock;
+ /* bcast_seqno_lock protects bcast_bits, last_bcast_seqno */
+ spinlock_t bcast_seqno_lock;
atomic_t bond_candidates;
struct list_head bond_list;
};
@@ -125,6 +125,7 @@
struct rcu_head rcu;
struct orig_node *orig_node;
struct hard_iface *if_incoming;
+ spinlock_t tq_lock; /* protects: tq_recv, tq_index */
};
@@ -145,34 +146,34 @@
atomic_t bcast_queue_left;
atomic_t batman_queue_left;
char num_ifaces;
- struct hlist_head softif_neigh_list;
- struct softif_neigh *softif_neigh;
struct debug_log *debug_log;
- struct hard_iface *primary_if;
struct kobject *mesh_obj;
struct dentry *debug_dir;
struct hlist_head forw_bat_list;
struct hlist_head forw_bcast_list;
struct hlist_head gw_list;
+ struct hlist_head softif_neigh_vids;
struct list_head vis_send_list;
struct hashtable_t *orig_hash;
- struct hashtable_t *hna_local_hash;
- struct hashtable_t *hna_global_hash;
+ struct hashtable_t *tt_local_hash;
+ struct hashtable_t *tt_global_hash;
struct hashtable_t *vis_hash;
spinlock_t forw_bat_list_lock; /* protects forw_bat_list */
spinlock_t forw_bcast_list_lock; /* protects */
- spinlock_t hna_lhash_lock; /* protects hna_local_hash */
- spinlock_t hna_ghash_lock; /* protects hna_global_hash */
+ spinlock_t tt_lhash_lock; /* protects tt_local_hash */
+ spinlock_t tt_ghash_lock; /* protects tt_global_hash */
spinlock_t gw_list_lock; /* protects gw_list and curr_gw */
spinlock_t vis_hash_lock; /* protects vis_hash */
spinlock_t vis_list_lock; /* protects vis_info::recv_list */
spinlock_t softif_neigh_lock; /* protects soft-interface neigh list */
- int16_t num_local_hna;
- atomic_t hna_local_changed;
- struct delayed_work hna_work;
+ spinlock_t softif_neigh_vid_lock; /* protects soft-interface vid list */
+ int16_t num_local_tt;
+ atomic_t tt_local_changed;
+ struct delayed_work tt_work;
struct delayed_work orig_work;
struct delayed_work vis_work;
struct gw_node __rcu *curr_gw; /* rcu protected pointer */
+ struct hard_iface __rcu *primary_if; /* rcu protected pointer */
struct vis_info *my_vis_info;
};
@@ -191,14 +192,14 @@
struct icmp_packet_rr icmp_packet;
};
-struct hna_local_entry {
+struct tt_local_entry {
uint8_t addr[ETH_ALEN];
unsigned long last_seen;
char never_purge;
struct hlist_node hash_entry;
};
-struct hna_global_entry {
+struct tt_global_entry {
uint8_t addr[ETH_ALEN];
struct orig_node *orig_node;
struct hlist_node hash_entry;
@@ -261,7 +262,7 @@
struct vis_info_entry {
uint8_t src[ETH_ALEN];
uint8_t dest[ETH_ALEN];
- uint8_t quality; /* quality = 0 means HNA */
+ uint8_t quality; /* quality = 0 client */
} __packed;
struct recvlist_node {
@@ -269,11 +270,20 @@
uint8_t mac[ETH_ALEN];
};
+struct softif_neigh_vid {
+ struct hlist_node list;
+ struct bat_priv *bat_priv;
+ short vid;
+ atomic_t refcount;
+ struct softif_neigh __rcu *softif_neigh;
+ struct rcu_head rcu;
+ struct hlist_head softif_neigh_list;
+};
+
struct softif_neigh {
struct hlist_node list;
uint8_t addr[ETH_ALEN];
unsigned long last_seen;
- short vid;
atomic_t refcount;
struct rcu_head rcu;
};
diff --git a/net/batman-adv/unicast.c b/net/batman-adv/unicast.c
index 19f84bd..19c3daf 100644
--- a/net/batman-adv/unicast.c
+++ b/net/batman-adv/unicast.c
@@ -221,15 +221,17 @@
struct hard_iface *hard_iface, uint8_t dstaddr[])
{
struct unicast_packet tmp_uc, *unicast_packet;
+ struct hard_iface *primary_if;
struct sk_buff *frag_skb;
struct unicast_frag_packet *frag1, *frag2;
int uc_hdr_len = sizeof(struct unicast_packet);
int ucf_hdr_len = sizeof(struct unicast_frag_packet);
int data_len = skb->len - uc_hdr_len;
- int large_tail = 0;
+ int large_tail = 0, ret = NET_RX_DROP;
uint16_t seqno;
- if (!bat_priv->primary_if)
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
goto dropped;
frag_skb = dev_alloc_skb(data_len - (data_len / 2) + ucf_hdr_len);
@@ -254,7 +256,7 @@
frag1->version = COMPAT_VERSION;
frag1->packet_type = BAT_UNICAST_FRAG;
- memcpy(frag1->orig, bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+ memcpy(frag1->orig, primary_if->net_dev->dev_addr, ETH_ALEN);
memcpy(frag2, frag1, sizeof(struct unicast_frag_packet));
if (data_len & 1)
@@ -269,13 +271,17 @@
send_skb_packet(skb, hard_iface, dstaddr);
send_skb_packet(frag_skb, hard_iface, dstaddr);
- return NET_RX_SUCCESS;
+ ret = NET_RX_SUCCESS;
+ goto out;
drop_frag:
kfree_skb(frag_skb);
dropped:
kfree_skb(skb);
- return NET_RX_DROP;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
}
int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv)
@@ -289,12 +295,12 @@
/* get routing information */
if (is_multicast_ether_addr(ethhdr->h_dest)) {
- orig_node = (struct orig_node *)gw_get_selected(bat_priv);
+ orig_node = (struct orig_node *)gw_get_selected_orig(bat_priv);
if (orig_node)
goto find_router;
}
- /* check for hna host - increases orig_node refcount */
+ /* check for tt host - increases orig_node refcount */
orig_node = transtable_search(bat_priv, ethhdr->h_dest);
find_router:
diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c
index f90212f..c39f20c 100644
--- a/net/batman-adv/vis.c
+++ b/net/batman-adv/vis.c
@@ -194,7 +194,7 @@
{
/* maximal length: max(4+17+2, 3+17+1+3+2) == 26 */
if (primary && entry->quality == 0)
- return sprintf(buff, "HNA %pM, ", entry->dest);
+ return sprintf(buff, "TT %pM, ", entry->dest);
else if (compare_eth(entry->src, src))
return sprintf(buff, "TQ %pM %d, ", entry->dest,
entry->quality);
@@ -204,6 +204,7 @@
int vis_seq_print_text(struct seq_file *seq, void *offset)
{
+ struct hard_iface *primary_if;
struct hlist_node *node;
struct hlist_head *head;
struct vis_info *info;
@@ -215,15 +216,18 @@
HLIST_HEAD(vis_if_list);
struct if_list_entry *entry;
struct hlist_node *pos, *n;
- int i, j;
+ int i, j, ret = 0;
int vis_server = atomic_read(&bat_priv->vis_mode);
size_t buff_pos, buf_size;
char *buff;
int compare;
- if ((!bat_priv->primary_if) ||
- (vis_server == VIS_TYPE_CLIENT_UPDATE))
- return 0;
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ goto out;
+
+ if (vis_server == VIS_TYPE_CLIENT_UPDATE)
+ goto out;
buf_size = 1;
/* Estimate length */
@@ -270,7 +274,8 @@
buff = kmalloc(buf_size, GFP_ATOMIC);
if (!buff) {
spin_unlock_bh(&bat_priv->vis_hash_lock);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
buff[0] = '\0';
buff_pos = 0;
@@ -328,7 +333,10 @@
seq_printf(seq, "%s", buff);
kfree(buff);
- return 0;
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
+ return ret;
}
/* add the info packet to the send list, if it was not
@@ -558,6 +566,7 @@
struct vis_info *info)
{
struct hashtable_t *hash = bat_priv->orig_hash;
+ struct neigh_node *router;
struct hlist_node *node;
struct hlist_head *head;
struct orig_node *orig_node;
@@ -571,13 +580,17 @@
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
- if ((orig_node) && (orig_node->router) &&
- (orig_node->flags & VIS_SERVER) &&
- (orig_node->router->tq_avg > best_tq)) {
- best_tq = orig_node->router->tq_avg;
+ router = orig_node_get_router(orig_node);
+ if (!router)
+ continue;
+
+ if ((orig_node->flags & VIS_SERVER) &&
+ (router->tq_avg > best_tq)) {
+ best_tq = router->tq_avg;
memcpy(packet->target_orig, orig_node->orig,
ETH_ALEN);
}
+ neigh_node_free_ref(router);
}
rcu_read_unlock();
}
@@ -605,11 +618,11 @@
struct hlist_node *node;
struct hlist_head *head;
struct orig_node *orig_node;
- struct neigh_node *neigh_node;
+ struct neigh_node *router;
struct vis_info *info = (struct vis_info *)bat_priv->my_vis_info;
struct vis_packet *packet = (struct vis_packet *)info->skb_packet->data;
struct vis_info_entry *entry;
- struct hna_local_entry *hna_local_entry;
+ struct tt_local_entry *tt_local_entry;
int best_tq = -1, i;
info->first_seen = jiffies;
@@ -633,59 +646,61 @@
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
- neigh_node = orig_node->router;
-
- if (!neigh_node)
+ router = orig_node_get_router(orig_node);
+ if (!router)
continue;
- if (!compare_eth(neigh_node->addr, orig_node->orig))
- continue;
+ if (!compare_eth(router->addr, orig_node->orig))
+ goto next;
- if (neigh_node->if_incoming->if_status != IF_ACTIVE)
- continue;
+ if (router->if_incoming->if_status != IF_ACTIVE)
+ goto next;
- if (neigh_node->tq_avg < 1)
- continue;
+ if (router->tq_avg < 1)
+ goto next;
/* fill one entry into buffer. */
entry = (struct vis_info_entry *)
skb_put(info->skb_packet, sizeof(*entry));
memcpy(entry->src,
- neigh_node->if_incoming->net_dev->dev_addr,
+ router->if_incoming->net_dev->dev_addr,
ETH_ALEN);
memcpy(entry->dest, orig_node->orig, ETH_ALEN);
- entry->quality = neigh_node->tq_avg;
+ entry->quality = router->tq_avg;
packet->entries++;
+next:
+ neigh_node_free_ref(router);
+
if (vis_packet_full(info))
goto unlock;
}
rcu_read_unlock();
}
- hash = bat_priv->hna_local_hash;
+ hash = bat_priv->tt_local_hash;
- spin_lock_bh(&bat_priv->hna_lhash_lock);
+ spin_lock_bh(&bat_priv->tt_lhash_lock);
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
- hlist_for_each_entry(hna_local_entry, node, head, hash_entry) {
+ hlist_for_each_entry(tt_local_entry, node, head, hash_entry) {
entry = (struct vis_info_entry *)
skb_put(info->skb_packet,
sizeof(*entry));
memset(entry->src, 0, ETH_ALEN);
- memcpy(entry->dest, hna_local_entry->addr, ETH_ALEN);
- entry->quality = 0; /* 0 means HNA */
+ memcpy(entry->dest, tt_local_entry->addr, ETH_ALEN);
+ entry->quality = 0; /* 0 means TT */
packet->entries++;
if (vis_packet_full(info)) {
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
return 0;
}
}
}
- spin_unlock_bh(&bat_priv->hna_lhash_lock);
+ spin_unlock_bh(&bat_priv->tt_lhash_lock);
return 0;
unlock:
@@ -725,6 +740,7 @@
static void broadcast_vis_packet(struct bat_priv *bat_priv,
struct vis_info *info)
{
+ struct neigh_node *router;
struct hashtable_t *hash = bat_priv->orig_hash;
struct hlist_node *node;
struct hlist_head *head;
@@ -745,19 +761,26 @@
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
/* if it's a vis server and reachable, send it. */
- if ((!orig_node) || (!orig_node->router))
- continue;
if (!(orig_node->flags & VIS_SERVER))
continue;
- /* don't send it if we already received the packet from
- * this node. */
- if (recv_list_is_in(bat_priv, &info->recv_list,
- orig_node->orig))
+
+ router = orig_node_get_router(orig_node);
+ if (!router)
continue;
+ /* don't send it if we already received the packet from
+ * this node. */
+ if (recv_list_is_in(bat_priv, &info->recv_list,
+ orig_node->orig)) {
+ neigh_node_free_ref(router);
+ continue;
+ }
+
memcpy(packet->target_orig, orig_node->orig, ETH_ALEN);
- hard_iface = orig_node->router->if_incoming;
- memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+ hard_iface = router->if_incoming;
+ memcpy(dstaddr, router->addr, ETH_ALEN);
+
+ neigh_node_free_ref(router);
skb = skb_clone(info->skb_packet, GFP_ATOMIC);
if (skb)
@@ -772,60 +795,48 @@
struct vis_info *info)
{
struct orig_node *orig_node;
- struct neigh_node *neigh_node = NULL;
+ struct neigh_node *router = NULL;
struct sk_buff *skb;
struct vis_packet *packet;
packet = (struct vis_packet *)info->skb_packet->data;
- rcu_read_lock();
orig_node = orig_hash_find(bat_priv, packet->target_orig);
-
if (!orig_node)
- goto unlock;
+ goto out;
- neigh_node = orig_node->router;
-
- if (!neigh_node)
- goto unlock;
-
- if (!atomic_inc_not_zero(&neigh_node->refcount)) {
- neigh_node = NULL;
- goto unlock;
- }
-
- rcu_read_unlock();
+ router = orig_node_get_router(orig_node);
+ if (!router)
+ goto out;
skb = skb_clone(info->skb_packet, GFP_ATOMIC);
if (skb)
- send_skb_packet(skb, neigh_node->if_incoming,
- neigh_node->addr);
+ send_skb_packet(skb, router->if_incoming, router->addr);
- goto out;
-
-unlock:
- rcu_read_unlock();
out:
- if (neigh_node)
- neigh_node_free_ref(neigh_node);
+ if (router)
+ neigh_node_free_ref(router);
if (orig_node)
orig_node_free_ref(orig_node);
- return;
}
/* only send one vis packet. called from send_vis_packets() */
static void send_vis_packet(struct bat_priv *bat_priv, struct vis_info *info)
{
+ struct hard_iface *primary_if;
struct vis_packet *packet;
+ primary_if = primary_if_get_selected(bat_priv);
+ if (!primary_if)
+ goto out;
+
packet = (struct vis_packet *)info->skb_packet->data;
if (packet->ttl < 2) {
pr_debug("Error - can't send vis packet: ttl exceeded\n");
- return;
+ goto out;
}
- memcpy(packet->sender_orig, bat_priv->primary_if->net_dev->dev_addr,
- ETH_ALEN);
+ memcpy(packet->sender_orig, primary_if->net_dev->dev_addr, ETH_ALEN);
packet->ttl--;
if (is_broadcast_ether_addr(packet->target_orig))
@@ -833,6 +844,10 @@
else
unicast_vis_packet(bat_priv, info);
packet->ttl++; /* restore TTL */
+
+out:
+ if (primary_if)
+ hardif_free_ref(primary_if);
}
/* called from timer; send (and maybe generate) vis packet. */
@@ -859,8 +874,7 @@
kref_get(&info->refcount);
spin_unlock_bh(&bat_priv->vis_hash_lock);
- if (bat_priv->primary_if)
- send_vis_packet(bat_priv, info);
+ send_vis_packet(bat_priv, info);
spin_lock_bh(&bat_priv->vis_hash_lock);
send_list_del(info);
diff --git a/net/bluetooth/bnep/bnep.h b/net/bluetooth/bnep/bnep.h
index 70672544..8e6c061 100644
--- a/net/bluetooth/bnep/bnep.h
+++ b/net/bluetooth/bnep/bnep.h
@@ -23,88 +23,88 @@
#include <linux/crc32.h>
#include <net/bluetooth/bluetooth.h>
-// Limits
-#define BNEP_MAX_PROTO_FILTERS 5
-#define BNEP_MAX_MULTICAST_FILTERS 20
+/* Limits */
+#define BNEP_MAX_PROTO_FILTERS 5
+#define BNEP_MAX_MULTICAST_FILTERS 20
-// UUIDs
-#define BNEP_BASE_UUID 0x0000000000001000800000805F9B34FB
-#define BNEP_UUID16 0x02
-#define BNEP_UUID32 0x04
-#define BNEP_UUID128 0x16
+/* UUIDs */
+#define BNEP_BASE_UUID 0x0000000000001000800000805F9B34FB
+#define BNEP_UUID16 0x02
+#define BNEP_UUID32 0x04
+#define BNEP_UUID128 0x16
-#define BNEP_SVC_PANU 0x1115
-#define BNEP_SVC_NAP 0x1116
-#define BNEP_SVC_GN 0x1117
+#define BNEP_SVC_PANU 0x1115
+#define BNEP_SVC_NAP 0x1116
+#define BNEP_SVC_GN 0x1117
-// Packet types
-#define BNEP_GENERAL 0x00
-#define BNEP_CONTROL 0x01
-#define BNEP_COMPRESSED 0x02
-#define BNEP_COMPRESSED_SRC_ONLY 0x03
-#define BNEP_COMPRESSED_DST_ONLY 0x04
+/* Packet types */
+#define BNEP_GENERAL 0x00
+#define BNEP_CONTROL 0x01
+#define BNEP_COMPRESSED 0x02
+#define BNEP_COMPRESSED_SRC_ONLY 0x03
+#define BNEP_COMPRESSED_DST_ONLY 0x04
-// Control types
-#define BNEP_CMD_NOT_UNDERSTOOD 0x00
-#define BNEP_SETUP_CONN_REQ 0x01
-#define BNEP_SETUP_CONN_RSP 0x02
-#define BNEP_FILTER_NET_TYPE_SET 0x03
-#define BNEP_FILTER_NET_TYPE_RSP 0x04
-#define BNEP_FILTER_MULTI_ADDR_SET 0x05
-#define BNEP_FILTER_MULTI_ADDR_RSP 0x06
+/* Control types */
+#define BNEP_CMD_NOT_UNDERSTOOD 0x00
+#define BNEP_SETUP_CONN_REQ 0x01
+#define BNEP_SETUP_CONN_RSP 0x02
+#define BNEP_FILTER_NET_TYPE_SET 0x03
+#define BNEP_FILTER_NET_TYPE_RSP 0x04
+#define BNEP_FILTER_MULTI_ADDR_SET 0x05
+#define BNEP_FILTER_MULTI_ADDR_RSP 0x06
-// Extension types
-#define BNEP_EXT_CONTROL 0x00
+/* Extension types */
+#define BNEP_EXT_CONTROL 0x00
-// Response messages
-#define BNEP_SUCCESS 0x00
+/* Response messages */
+#define BNEP_SUCCESS 0x00
-#define BNEP_CONN_INVALID_DST 0x01
-#define BNEP_CONN_INVALID_SRC 0x02
-#define BNEP_CONN_INVALID_SVC 0x03
-#define BNEP_CONN_NOT_ALLOWED 0x04
+#define BNEP_CONN_INVALID_DST 0x01
+#define BNEP_CONN_INVALID_SRC 0x02
+#define BNEP_CONN_INVALID_SVC 0x03
+#define BNEP_CONN_NOT_ALLOWED 0x04
-#define BNEP_FILTER_UNSUPPORTED_REQ 0x01
-#define BNEP_FILTER_INVALID_RANGE 0x02
-#define BNEP_FILTER_INVALID_MCADDR 0x02
-#define BNEP_FILTER_LIMIT_REACHED 0x03
-#define BNEP_FILTER_DENIED_SECURITY 0x04
+#define BNEP_FILTER_UNSUPPORTED_REQ 0x01
+#define BNEP_FILTER_INVALID_RANGE 0x02
+#define BNEP_FILTER_INVALID_MCADDR 0x02
+#define BNEP_FILTER_LIMIT_REACHED 0x03
+#define BNEP_FILTER_DENIED_SECURITY 0x04
-// L2CAP settings
-#define BNEP_MTU 1691
-#define BNEP_PSM 0x0f
-#define BNEP_FLUSH_TO 0xffff
-#define BNEP_CONNECT_TO 15
-#define BNEP_FILTER_TO 15
+/* L2CAP settings */
+#define BNEP_MTU 1691
+#define BNEP_PSM 0x0f
+#define BNEP_FLUSH_TO 0xffff
+#define BNEP_CONNECT_TO 15
+#define BNEP_FILTER_TO 15
-// Headers
-#define BNEP_TYPE_MASK 0x7f
-#define BNEP_EXT_HEADER 0x80
+/* Headers */
+#define BNEP_TYPE_MASK 0x7f
+#define BNEP_EXT_HEADER 0x80
struct bnep_setup_conn_req {
- __u8 type;
- __u8 ctrl;
- __u8 uuid_size;
- __u8 service[0];
+ __u8 type;
+ __u8 ctrl;
+ __u8 uuid_size;
+ __u8 service[0];
} __packed;
struct bnep_set_filter_req {
- __u8 type;
- __u8 ctrl;
+ __u8 type;
+ __u8 ctrl;
__be16 len;
- __u8 list[0];
+ __u8 list[0];
} __packed;
struct bnep_control_rsp {
- __u8 type;
- __u8 ctrl;
+ __u8 type;
+ __u8 ctrl;
__be16 resp;
} __packed;
struct bnep_ext_hdr {
- __u8 type;
- __u8 len;
- __u8 data[0];
+ __u8 type;
+ __u8 len;
+ __u8 data[0];
} __packed;
/* BNEP ioctl defines */
@@ -114,10 +114,10 @@
#define BNEPGETCONNINFO _IOR('B', 211, int)
struct bnep_connadd_req {
- int sock; // Connected socket
+ int sock; /* Connected socket */
__u32 flags;
__u16 role;
- char device[16]; // Name of the Ethernet device
+ char device[16]; /* Name of the Ethernet device */
};
struct bnep_conndel_req {
@@ -148,14 +148,14 @@
int bnep_get_connlist(struct bnep_connlist_req *req);
int bnep_get_conninfo(struct bnep_conninfo *ci);
-// BNEP sessions
+/* BNEP sessions */
struct bnep_session {
struct list_head list;
unsigned int role;
unsigned long state;
unsigned long flags;
- atomic_t killed;
+ struct task_struct *task;
struct ethhdr eh;
struct msghdr msg;
@@ -173,7 +173,7 @@
static inline int bnep_mc_hash(__u8 *addr)
{
- return (crc32_be(~0, addr, ETH_ALEN) >> 26);
+ return crc32_be(~0, addr, ETH_ALEN) >> 26;
}
#endif
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 03d4d12..ca39fcf 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -36,6 +36,7 @@
#include <linux/errno.h>
#include <linux/net.h>
#include <linux/slab.h>
+#include <linux/kthread.h>
#include <net/sock.h>
#include <linux/socket.h>
@@ -131,7 +132,8 @@
return -EILSEQ;
n = get_unaligned_be16(data);
- data++; len -= 2;
+ data++;
+ len -= 2;
if (len < n)
return -EILSEQ;
@@ -176,7 +178,8 @@
return -EILSEQ;
n = get_unaligned_be16(data);
- data += 2; len -= 2;
+ data += 2;
+ len -= 2;
if (len < n)
return -EILSEQ;
@@ -187,6 +190,8 @@
n /= (ETH_ALEN * 2);
if (n > 0) {
+ int i;
+
s->mc_filter = 0;
/* Always send broadcast */
@@ -196,18 +201,22 @@
for (; n > 0; n--) {
u8 a1[6], *a2;
- memcpy(a1, data, ETH_ALEN); data += ETH_ALEN;
- a2 = data; data += ETH_ALEN;
+ memcpy(a1, data, ETH_ALEN);
+ data += ETH_ALEN;
+ a2 = data;
+ data += ETH_ALEN;
BT_DBG("mc filter %s -> %s",
batostr((void *) a1), batostr((void *) a2));
- #define INCA(a) { int i = 5; while (i >=0 && ++a[i--] == 0); }
-
/* Iterate from a1 to a2 */
set_bit(bnep_mc_hash(a1), (ulong *) &s->mc_filter);
while (memcmp(a1, a2, 6) < 0 && s->mc_filter != ~0LL) {
- INCA(a1);
+ /* Increment a1 */
+ i = 5;
+ while (i >= 0 && ++a1[i--] == 0)
+ ;
+
set_bit(bnep_mc_hash(a1), (ulong *) &s->mc_filter);
}
}
@@ -227,7 +236,8 @@
u8 cmd = *(u8 *)data;
int err = 0;
- data++; len--;
+ data++;
+ len--;
switch (cmd) {
case BNEP_CMD_NOT_UNDERSTOOD:
@@ -302,7 +312,6 @@
ETH_ALEN + 2, /* BNEP_COMPRESSED_SRC_ONLY */
ETH_ALEN + 2 /* BNEP_COMPRESSED_DST_ONLY */
};
-#define BNEP_RX_TYPES (sizeof(__bnep_rx_hlen) - 1)
static inline int bnep_rx_frame(struct bnep_session *s, struct sk_buff *skb)
{
@@ -312,9 +321,10 @@
dev->stats.rx_bytes += skb->len;
- type = *(u8 *) skb->data; skb_pull(skb, 1);
+ type = *(u8 *) skb->data;
+ skb_pull(skb, 1);
- if ((type & BNEP_TYPE_MASK) > BNEP_RX_TYPES)
+ if ((type & BNEP_TYPE_MASK) >= sizeof(__bnep_rx_hlen))
goto badframe;
if ((type & BNEP_TYPE_MASK) == BNEP_CONTROL) {
@@ -367,14 +377,14 @@
case BNEP_COMPRESSED_DST_ONLY:
memcpy(__skb_put(nskb, ETH_ALEN), skb_mac_header(skb),
- ETH_ALEN);
+ ETH_ALEN);
memcpy(__skb_put(nskb, ETH_ALEN + 2), s->eh.h_source,
- ETH_ALEN + 2);
+ ETH_ALEN + 2);
break;
case BNEP_GENERAL:
memcpy(__skb_put(nskb, ETH_ALEN * 2), skb_mac_header(skb),
- ETH_ALEN * 2);
+ ETH_ALEN * 2);
put_unaligned(s->eh.h_proto, (__be16 *) __skb_put(nskb, 2));
break;
}
@@ -470,15 +480,14 @@
BT_DBG("");
- daemonize("kbnepd %s", dev->name);
set_user_nice(current, -15);
init_waitqueue_entry(&wait, current);
add_wait_queue(sk_sleep(sk), &wait);
- while (!atomic_read(&s->killed)) {
+ while (!kthread_should_stop()) {
set_current_state(TASK_INTERRUPTIBLE);
- // RX
+ /* RX */
while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
skb_orphan(skb);
bnep_rx_frame(s, skb);
@@ -487,7 +496,7 @@
if (sk->sk_state != BT_CONNECTED)
break;
- // TX
+ /* TX */
while ((skb = skb_dequeue(&sk->sk_write_queue)))
if (bnep_tx_frame(s, skb))
break;
@@ -555,8 +564,8 @@
/* session struct allocated as private part of net_device */
dev = alloc_netdev(sizeof(struct bnep_session),
- (*req->device) ? req->device : "bnep%d",
- bnep_net_setup);
+ (*req->device) ? req->device : "bnep%d",
+ bnep_net_setup);
if (!dev)
return -ENOMEM;
@@ -571,7 +580,7 @@
s = netdev_priv(dev);
/* This is rx header therefore addresses are swapped.
- * ie eh.h_dest is our local address. */
+ * ie. eh.h_dest is our local address. */
memcpy(s->eh.h_dest, &src, ETH_ALEN);
memcpy(s->eh.h_source, &dst, ETH_ALEN);
memcpy(dev->dev_addr, s->eh.h_dest, ETH_ALEN);
@@ -597,17 +606,17 @@
SET_NETDEV_DEVTYPE(dev, &bnep_type);
err = register_netdev(dev);
- if (err) {
+ if (err)
goto failed;
- }
__bnep_link_session(s);
- err = kernel_thread(bnep_session, s, CLONE_KERNEL);
- if (err < 0) {
+ s->task = kthread_run(bnep_session, s, "kbnepd %s", dev->name);
+ if (IS_ERR(s->task)) {
/* Session thread start failed, gotta cleanup. */
unregister_netdev(dev);
__bnep_unlink_session(s);
+ err = PTR_ERR(s->task);
goto failed;
}
@@ -631,15 +640,9 @@
down_read(&bnep_session_sem);
s = __bnep_get_session(req->dst);
- if (s) {
- /* Wakeup user-space which is polling for socket errors.
- * This is temporary hack until we have shutdown in L2CAP */
- s->sock->sk->sk_err = EUNATCH;
-
- /* Kill session thread */
- atomic_inc(&s->killed);
- wake_up_interruptible(sk_sleep(s->sock->sk));
- } else
+ if (s)
+ kthread_stop(s->task);
+ else
err = -ENOENT;
up_read(&bnep_session_sem);
diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c
index d935da7..17800b1 100644
--- a/net/bluetooth/bnep/sock.c
+++ b/net/bluetooth/bnep/sock.c
@@ -39,10 +39,10 @@
#include <linux/init.h>
#include <linux/compat.h>
#include <linux/gfp.h>
+#include <linux/uaccess.h>
#include <net/sock.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
#include "bnep.h"
diff --git a/net/bluetooth/cmtp/capi.c b/net/bluetooth/cmtp/capi.c
index 67cff810..744233c 100644
--- a/net/bluetooth/cmtp/capi.c
+++ b/net/bluetooth/cmtp/capi.c
@@ -35,6 +35,7 @@
#include <linux/ioctl.h>
#include <linux/file.h>
#include <linux/wait.h>
+#include <linux/kthread.h>
#include <net/sock.h>
#include <linux/isdn/capilli.h>
@@ -143,7 +144,7 @@
skb_queue_tail(&session->transmit, skb);
- cmtp_schedule(session);
+ wake_up_interruptible(sk_sleep(session->sock->sk));
}
static void cmtp_send_interopmsg(struct cmtp_session *session,
@@ -386,8 +387,7 @@
capi_ctr_down(ctrl);
- atomic_inc(&session->terminate);
- cmtp_schedule(session);
+ kthread_stop(session->task);
}
static void cmtp_register_appl(struct capi_ctr *ctrl, __u16 appl, capi_register_params *rp)
diff --git a/net/bluetooth/cmtp/cmtp.h b/net/bluetooth/cmtp/cmtp.h
index 785e79e..db43b54 100644
--- a/net/bluetooth/cmtp/cmtp.h
+++ b/net/bluetooth/cmtp/cmtp.h
@@ -37,7 +37,7 @@
#define CMTP_LOOPBACK 0
struct cmtp_connadd_req {
- int sock; // Connected socket
+ int sock; /* Connected socket */
__u32 flags;
};
@@ -81,7 +81,7 @@
char name[BTNAMSIZ];
- atomic_t terminate;
+ struct task_struct *task;
wait_queue_head_t wait;
@@ -121,13 +121,6 @@
void cmtp_recv_capimsg(struct cmtp_session *session, struct sk_buff *skb);
-static inline void cmtp_schedule(struct cmtp_session *session)
-{
- struct sock *sk = session->sock->sk;
-
- wake_up_interruptible(sk_sleep(sk));
-}
-
/* CMTP init defines */
int cmtp_init_sockets(void);
void cmtp_cleanup_sockets(void);
diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c
index 964ea91..c5b11af 100644
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -35,6 +35,7 @@
#include <linux/ioctl.h>
#include <linux/file.h>
#include <linux/init.h>
+#include <linux/kthread.h>
#include <net/sock.h>
#include <linux/isdn/capilli.h>
@@ -235,9 +236,12 @@
size = min_t(uint, ((tail < 258) ? (tail - 2) : (tail - 3)), skb->len);
- if ((scb->id < 0) && ((scb->id = cmtp_alloc_block_id(session)) < 0)) {
- skb_queue_head(&session->transmit, skb);
- break;
+ if (scb->id < 0) {
+ scb->id = cmtp_alloc_block_id(session);
+ if (scb->id < 0) {
+ skb_queue_head(&session->transmit, skb);
+ break;
+ }
}
if (size < 256) {
@@ -284,12 +288,11 @@
BT_DBG("session %p", session);
- daemonize("kcmtpd_ctr_%d", session->num);
set_user_nice(current, -15);
init_waitqueue_entry(&wait, current);
add_wait_queue(sk_sleep(sk), &wait);
- while (!atomic_read(&session->terminate)) {
+ while (!kthread_should_stop()) {
set_current_state(TASK_INTERRUPTIBLE);
if (sk->sk_state != BT_CONNECTED)
@@ -343,7 +346,8 @@
bacpy(&session->bdaddr, &bt_sk(sock->sk)->dst);
- session->mtu = min_t(uint, l2cap_pi(sock->sk)->omtu, l2cap_pi(sock->sk)->imtu);
+ session->mtu = min_t(uint, l2cap_pi(sock->sk)->chan->omtu,
+ l2cap_pi(sock->sk)->chan->imtu);
BT_DBG("mtu %d", session->mtu);
@@ -367,9 +371,12 @@
__cmtp_link_session(session);
- err = kernel_thread(cmtp_session, session, CLONE_KERNEL);
- if (err < 0)
+ session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
+ session->num);
+ if (IS_ERR(session->task)) {
+ err = PTR_ERR(session->task);
goto unlink;
+ }
if (!(session->flags & (1 << CMTP_LOOPBACK))) {
err = cmtp_attach_device(session);
@@ -406,9 +413,8 @@
/* Flush the transmit queue */
skb_queue_purge(&session->transmit);
- /* Kill session thread */
- atomic_inc(&session->terminate);
- cmtp_schedule(session);
+ /* Stop session thread */
+ kthread_stop(session->task);
} else
err = -ENOENT;
diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c
index 7ea1979..3f2dd5c 100644
--- a/net/bluetooth/cmtp/sock.c
+++ b/net/bluetooth/cmtp/sock.c
@@ -34,12 +34,12 @@
#include <linux/file.h>
#include <linux/compat.h>
#include <linux/gfp.h>
+#include <linux/uaccess.h>
#include <net/sock.h>
#include <linux/isdn/capilli.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
#include "cmtp.h"
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 7a6f56b..3163330 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -269,6 +269,19 @@
hci_conn_enter_sniff_mode(conn);
}
+static void hci_conn_auto_accept(unsigned long arg)
+{
+ struct hci_conn *conn = (void *) arg;
+ struct hci_dev *hdev = conn->hdev;
+
+ hci_dev_lock(hdev);
+
+ hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
+ &conn->dst);
+
+ hci_dev_unlock(hdev);
+}
+
struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
{
struct hci_conn *conn;
@@ -287,6 +300,7 @@
conn->auth_type = HCI_AT_GENERAL_BONDING;
conn->io_capability = hdev->io_capability;
conn->remote_auth = 0xff;
+ conn->key_type = 0xff;
conn->power_save = 1;
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
@@ -311,6 +325,8 @@
setup_timer(&conn->disc_timer, hci_conn_timeout, (unsigned long)conn);
setup_timer(&conn->idle_timer, hci_conn_idle, (unsigned long)conn);
+ setup_timer(&conn->auto_accept_timer, hci_conn_auto_accept,
+ (unsigned long) conn);
atomic_set(&conn->refcnt, 0);
@@ -341,6 +357,8 @@
del_timer(&conn->disc_timer);
+ del_timer(&conn->auto_accept_timer);
+
if (conn->type == ACL_LINK) {
struct hci_conn *sco = conn->link;
if (sco)
@@ -535,36 +553,93 @@
return 0;
}
+/* Encrypt the the link */
+static void hci_conn_encrypt(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
+ struct hci_cp_set_conn_encrypt cp;
+ cp.handle = cpu_to_le16(conn->handle);
+ cp.encrypt = 0x01;
+ hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
+ &cp);
+ }
+}
+
/* Enable security */
int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
{
BT_DBG("conn %p", conn);
+ /* For sdp we don't need the link key. */
if (sec_level == BT_SECURITY_SDP)
return 1;
+ /* For non 2.1 devices and low security level we don't need the link
+ key. */
if (sec_level == BT_SECURITY_LOW &&
(!conn->ssp_mode || !conn->hdev->ssp_mode))
return 1;
- if (conn->link_mode & HCI_LM_ENCRYPT)
- return hci_conn_auth(conn, sec_level, auth_type);
+ /* For other security levels we need the link key. */
+ if (!(conn->link_mode & HCI_LM_AUTH))
+ goto auth;
+ /* An authenticated combination key has sufficient security for any
+ security level. */
+ if (conn->key_type == HCI_LK_AUTH_COMBINATION)
+ goto encrypt;
+
+ /* An unauthenticated combination key has sufficient security for
+ security level 1 and 2. */
+ if (conn->key_type == HCI_LK_UNAUTH_COMBINATION &&
+ (sec_level == BT_SECURITY_MEDIUM ||
+ sec_level == BT_SECURITY_LOW))
+ goto encrypt;
+
+ /* A combination key has always sufficient security for the security
+ levels 1 or 2. High security level requires the combination key
+ is generated using maximum PIN code length (16).
+ For pre 2.1 units. */
+ if (conn->key_type == HCI_LK_COMBINATION &&
+ (sec_level != BT_SECURITY_HIGH ||
+ conn->pin_length == 16))
+ goto encrypt;
+
+auth:
if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
- if (hci_conn_auth(conn, sec_level, auth_type)) {
- struct hci_cp_set_conn_encrypt cp;
- cp.handle = cpu_to_le16(conn->handle);
- cp.encrypt = 1;
- hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT,
- sizeof(cp), &cp);
- }
+ hci_conn_auth(conn, sec_level, auth_type);
+ return 0;
+encrypt:
+ if (conn->link_mode & HCI_LM_ENCRYPT)
+ return 1;
+
+ hci_conn_encrypt(conn);
return 0;
}
EXPORT_SYMBOL(hci_conn_security);
+/* Check secure link requirement */
+int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
+{
+ BT_DBG("conn %p", conn);
+
+ if (sec_level != BT_SECURITY_HIGH)
+ return 1; /* Accept if non-secure is required */
+
+ if (conn->key_type == HCI_LK_AUTH_COMBINATION ||
+ (conn->key_type == HCI_LK_COMBINATION &&
+ conn->pin_length == 16))
+ return 1;
+
+ return 0; /* Reject not secure link */
+}
+EXPORT_SYMBOL(hci_conn_check_secure);
+
/* Change link key */
int hci_conn_change_link_key(struct hci_conn *conn)
{
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index c83f618..815269b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -56,7 +56,6 @@
static void hci_cmd_task(unsigned long arg);
static void hci_rx_task(unsigned long arg);
static void hci_tx_task(unsigned long arg);
-static void hci_notify(struct hci_dev *hdev, int event);
static DEFINE_RWLOCK(hci_task_lock);
@@ -587,10 +586,8 @@
hci_req_cancel(hdev, ENODEV);
hci_req_lock(hdev);
- /* Stop timer, it might be running */
- del_timer_sync(&hdev->cmd_timer);
-
if (!test_and_clear_bit(HCI_UP, &hdev->flags)) {
+ del_timer_sync(&hdev->cmd_timer);
hci_req_unlock(hdev);
return 0;
}
@@ -629,6 +626,7 @@
/* Drop last sent command */
if (hdev->sent_cmd) {
+ del_timer_sync(&hdev->cmd_timer);
kfree_skb(hdev->sent_cmd);
hdev->sent_cmd = NULL;
}
@@ -1022,18 +1020,54 @@
return NULL;
}
-int hci_add_link_key(struct hci_dev *hdev, int new_key, bdaddr_t *bdaddr,
- u8 *val, u8 type, u8 pin_len)
+static int hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn,
+ u8 key_type, u8 old_key_type)
+{
+ /* Legacy key */
+ if (key_type < 0x03)
+ return 1;
+
+ /* Debug keys are insecure so don't store them persistently */
+ if (key_type == HCI_LK_DEBUG_COMBINATION)
+ return 0;
+
+ /* Changed combination key and there's no previous one */
+ if (key_type == HCI_LK_CHANGED_COMBINATION && old_key_type == 0xff)
+ return 0;
+
+ /* Security mode 3 case */
+ if (!conn)
+ return 1;
+
+ /* Neither local nor remote side had no-bonding as requirement */
+ if (conn->auth_type > 0x01 && conn->remote_auth > 0x01)
+ return 1;
+
+ /* Local side had dedicated bonding as requirement */
+ if (conn->auth_type == 0x02 || conn->auth_type == 0x03)
+ return 1;
+
+ /* Remote side had dedicated bonding as requirement */
+ if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03)
+ return 1;
+
+ /* If none of the above criteria match, then don't store the key
+ * persistently */
+ return 0;
+}
+
+int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key,
+ bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len)
{
struct link_key *key, *old_key;
- u8 old_key_type;
+ u8 old_key_type, persistent;
old_key = hci_find_link_key(hdev, bdaddr);
if (old_key) {
old_key_type = old_key->type;
key = old_key;
} else {
- old_key_type = 0xff;
+ old_key_type = conn ? conn->key_type : 0xff;
key = kzalloc(sizeof(*key), GFP_ATOMIC);
if (!key)
return -ENOMEM;
@@ -1042,16 +1076,37 @@
BT_DBG("%s key for %s type %u", hdev->name, batostr(bdaddr), type);
+ /* Some buggy controller combinations generate a changed
+ * combination key for legacy pairing even when there's no
+ * previous key */
+ if (type == HCI_LK_CHANGED_COMBINATION &&
+ (!conn || conn->remote_auth == 0xff) &&
+ old_key_type == 0xff) {
+ type = HCI_LK_COMBINATION;
+ if (conn)
+ conn->key_type = type;
+ }
+
bacpy(&key->bdaddr, bdaddr);
memcpy(key->val, val, 16);
- key->type = type;
key->pin_len = pin_len;
- if (new_key)
- mgmt_new_key(hdev->id, key, old_key_type);
-
- if (type == 0x06)
+ if (type == HCI_LK_CHANGED_COMBINATION)
key->type = old_key_type;
+ else
+ key->type = type;
+
+ if (!new_key)
+ return 0;
+
+ persistent = hci_persistent_key(hdev, conn, type, old_key_type);
+
+ mgmt_new_key(hdev->id, key, persistent);
+
+ if (!persistent) {
+ list_del(&key->list);
+ kfree(key);
+ }
return 0;
}
@@ -1083,6 +1138,70 @@
tasklet_schedule(&hdev->cmd_task);
}
+struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev,
+ bdaddr_t *bdaddr)
+{
+ struct oob_data *data;
+
+ list_for_each_entry(data, &hdev->remote_oob_data, list)
+ if (bacmp(bdaddr, &data->bdaddr) == 0)
+ return data;
+
+ return NULL;
+}
+
+int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr)
+{
+ struct oob_data *data;
+
+ data = hci_find_remote_oob_data(hdev, bdaddr);
+ if (!data)
+ return -ENOENT;
+
+ BT_DBG("%s removing %s", hdev->name, batostr(bdaddr));
+
+ list_del(&data->list);
+ kfree(data);
+
+ return 0;
+}
+
+int hci_remote_oob_data_clear(struct hci_dev *hdev)
+{
+ struct oob_data *data, *n;
+
+ list_for_each_entry_safe(data, n, &hdev->remote_oob_data, list) {
+ list_del(&data->list);
+ kfree(data);
+ }
+
+ return 0;
+}
+
+int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash,
+ u8 *randomizer)
+{
+ struct oob_data *data;
+
+ data = hci_find_remote_oob_data(hdev, bdaddr);
+
+ if (!data) {
+ data = kmalloc(sizeof(*data), GFP_ATOMIC);
+ if (!data)
+ return -ENOMEM;
+
+ bacpy(&data->bdaddr, bdaddr);
+ list_add(&data->list, &hdev->remote_oob_data);
+ }
+
+ memcpy(data->hash, hash, sizeof(data->hash));
+ memcpy(data->randomizer, randomizer, sizeof(data->randomizer));
+
+ BT_DBG("%s for %s", hdev->name, batostr(bdaddr));
+
+ return 0;
+}
+
/* Register HCI device */
int hci_register_dev(struct hci_dev *hdev)
{
@@ -1147,6 +1266,8 @@
INIT_LIST_HEAD(&hdev->link_keys);
+ INIT_LIST_HEAD(&hdev->remote_oob_data);
+
INIT_WORK(&hdev->power_on, hci_power_on);
INIT_WORK(&hdev->power_off, hci_power_off);
setup_timer(&hdev->off_timer, hci_auto_off, (unsigned long) hdev);
@@ -1226,6 +1347,7 @@
hci_blacklist_clear(hdev);
hci_uuids_clear(hdev);
hci_link_keys_clear(hdev);
+ hci_remote_oob_data_clear(hdev);
hci_dev_unlock_bh(hdev);
__hci_dev_put(hdev);
@@ -1275,7 +1397,7 @@
EXPORT_SYMBOL(hci_recv_frame);
static int hci_reassembly(struct hci_dev *hdev, int type, void *data,
- int count, __u8 index, gfp_t gfp_mask)
+ int count, __u8 index)
{
int len = 0;
int hlen = 0;
@@ -1305,7 +1427,7 @@
break;
}
- skb = bt_skb_alloc(len, gfp_mask);
+ skb = bt_skb_alloc(len, GFP_ATOMIC);
if (!skb)
return -ENOMEM;
@@ -1391,8 +1513,7 @@
return -EILSEQ;
while (count) {
- rem = hci_reassembly(hdev, type, data, count,
- type - 1, GFP_ATOMIC);
+ rem = hci_reassembly(hdev, type, data, count, type - 1);
if (rem < 0)
return rem;
@@ -1426,8 +1547,8 @@
} else
type = bt_cb(skb)->pkt_type;
- rem = hci_reassembly(hdev, type, data,
- count, STREAM_REASSEMBLY, GFP_ATOMIC);
+ rem = hci_reassembly(hdev, type, data, count,
+ STREAM_REASSEMBLY);
if (rem < 0)
return rem;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index cebe7588..f13ddbf 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -56,7 +56,9 @@
if (status)
return;
- clear_bit(HCI_INQUIRY, &hdev->flags);
+ if (test_bit(HCI_MGMT, &hdev->flags) &&
+ test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ mgmt_discovering(hdev->id, 0);
hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status);
@@ -72,7 +74,9 @@
if (status)
return;
- clear_bit(HCI_INQUIRY, &hdev->flags);
+ if (test_bit(HCI_MGMT, &hdev->flags) &&
+ test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ mgmt_discovering(hdev->id, 0);
hci_conn_check_pending(hdev);
}
@@ -195,14 +199,17 @@
BT_DBG("%s status 0x%x", hdev->name, status);
- if (status)
- return;
-
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LOCAL_NAME);
if (!sent)
return;
- memcpy(hdev->dev_name, sent, 248);
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_set_local_name_complete(hdev->id, sent, status);
+
+ if (status)
+ return;
+
+ memcpy(hdev->dev_name, sent, HCI_MAX_NAME_LENGTH);
}
static void hci_cc_read_local_name(struct hci_dev *hdev, struct sk_buff *skb)
@@ -214,7 +221,7 @@
if (rp->status)
return;
- memcpy(hdev->dev_name, rp->name, 248);
+ memcpy(hdev->dev_name, rp->name, HCI_MAX_NAME_LENGTH);
}
static void hci_cc_write_auth_enable(struct hci_dev *hdev, struct sk_buff *skb)
@@ -821,16 +828,31 @@
rp->status);
}
+static void hci_cc_read_local_oob_data_reply(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_rp_read_local_oob_data *rp = (void *) skb->data;
+
+ BT_DBG("%s status 0x%x", hdev->name, rp->status);
+
+ mgmt_read_local_oob_data_reply_complete(hdev->id, rp->hash,
+ rp->randomizer, rp->status);
+}
+
static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
{
BT_DBG("%s status 0x%x", hdev->name, status);
if (status) {
hci_req_complete(hdev, HCI_OP_INQUIRY, status);
-
hci_conn_check_pending(hdev);
- } else
- set_bit(HCI_INQUIRY, &hdev->flags);
+ return;
+ }
+
+ if (test_bit(HCI_MGMT, &hdev->flags) &&
+ !test_and_set_bit(HCI_INQUIRY,
+ &hdev->flags))
+ mgmt_discovering(hdev->id, 1);
}
static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
@@ -999,12 +1021,19 @@
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
- if (conn && hci_outgoing_auth_needed(hdev, conn)) {
+ if (!conn)
+ goto unlock;
+
+ if (!hci_outgoing_auth_needed(hdev, conn))
+ goto unlock;
+
+ if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) {
struct hci_cp_auth_requested cp;
cp.handle = __cpu_to_le16(conn->handle);
hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp);
}
+unlock:
hci_dev_unlock(hdev);
}
@@ -1194,7 +1223,9 @@
BT_DBG("%s status %d", hdev->name, status);
- clear_bit(HCI_INQUIRY, &hdev->flags);
+ if (test_bit(HCI_MGMT, &hdev->flags) &&
+ test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ mgmt_discovering(hdev->id, 0);
hci_req_complete(hdev, HCI_OP_INQUIRY, status);
@@ -1214,7 +1245,13 @@
hci_dev_lock(hdev);
- for (; num_rsp; num_rsp--) {
+ if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags)) {
+
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_discovering(hdev->id, 1);
+ }
+
+ for (; num_rsp; num_rsp--, info++) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
@@ -1223,8 +1260,9 @@
data.clock_offset = info->clock_offset;
data.rssi = 0x00;
data.ssp_mode = 0x00;
- info++;
hci_inquiry_cache_update(hdev, &data);
+ mgmt_device_found(hdev->id, &info->bdaddr, info->dev_class, 0,
+ NULL);
}
hci_dev_unlock(hdev);
@@ -1402,7 +1440,7 @@
conn->state = BT_CLOSED;
- if (conn->type == ACL_LINK)
+ if (conn->type == ACL_LINK || conn->type == LE_LINK)
mgmt_disconnected(hdev->id, &conn->dst);
hci_proto_disconn_cfm(conn, ev->reason);
@@ -1428,7 +1466,6 @@
conn->sec_level = conn->pending_sec_level;
} else {
mgmt_auth_failed(hdev->id, &conn->dst, ev->status);
- conn->sec_level = BT_SECURITY_LOW;
}
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
@@ -1482,13 +1519,23 @@
hci_dev_lock(hdev);
+ if (ev->status == 0 && test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_remote_name(hdev->id, &ev->bdaddr, ev->name);
+
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
- if (conn && hci_outgoing_auth_needed(hdev, conn)) {
+ if (!conn)
+ goto unlock;
+
+ if (!hci_outgoing_auth_needed(hdev, conn))
+ goto unlock;
+
+ if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) {
struct hci_cp_auth_requested cp;
cp.handle = __cpu_to_le16(conn->handle);
hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp);
}
+unlock:
hci_dev_unlock(hdev);
}
@@ -1751,6 +1798,10 @@
hci_cc_pin_code_neg_reply(hdev, skb);
break;
+ case HCI_OP_READ_LOCAL_OOB_DATA:
+ hci_cc_read_local_oob_data_reply(hdev, skb);
+ break;
+
case HCI_OP_LE_READ_BUFFER_SIZE:
hci_cc_le_read_buffer_size(hdev, skb);
break;
@@ -1984,9 +2035,16 @@
if (!test_bit(HCI_PAIRABLE, &hdev->flags))
hci_send_cmd(hdev, HCI_OP_PIN_CODE_NEG_REPLY,
sizeof(ev->bdaddr), &ev->bdaddr);
+ else if (test_bit(HCI_MGMT, &hdev->flags)) {
+ u8 secure;
- if (test_bit(HCI_MGMT, &hdev->flags))
- mgmt_pin_code_request(hdev->id, &ev->bdaddr);
+ if (conn->pending_sec_level == BT_SECURITY_HIGH)
+ secure = 1;
+ else
+ secure = 0;
+
+ mgmt_pin_code_request(hdev->id, &ev->bdaddr, secure);
+ }
hci_dev_unlock(hdev);
}
@@ -2015,17 +2073,30 @@
BT_DBG("%s found key type %u for %s", hdev->name, key->type,
batostr(&ev->bdaddr));
- if (!test_bit(HCI_DEBUG_KEYS, &hdev->flags) && key->type == 0x03) {
+ if (!test_bit(HCI_DEBUG_KEYS, &hdev->flags) &&
+ key->type == HCI_LK_DEBUG_COMBINATION) {
BT_DBG("%s ignoring debug key", hdev->name);
goto not_found;
}
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+ if (conn) {
+ if (key->type == HCI_LK_UNAUTH_COMBINATION &&
+ conn->auth_type != 0xff &&
+ (conn->auth_type & 0x01)) {
+ BT_DBG("%s ignoring unauthenticated key", hdev->name);
+ goto not_found;
+ }
- if (key->type == 0x04 && conn && conn->auth_type != 0xff &&
- (conn->auth_type & 0x01)) {
- BT_DBG("%s ignoring unauthenticated key", hdev->name);
- goto not_found;
+ if (key->type == HCI_LK_COMBINATION && key->pin_len < 16 &&
+ conn->pending_sec_level == BT_SECURITY_HIGH) {
+ BT_DBG("%s ignoring key unauthenticated for high \
+ security", hdev->name);
+ goto not_found;
+ }
+
+ conn->key_type = key->type;
+ conn->pin_length = key->pin_len;
}
bacpy(&cp.bdaddr, &ev->bdaddr);
@@ -2057,11 +2128,15 @@
hci_conn_hold(conn);
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
pin_len = conn->pin_length;
+
+ if (ev->key_type != HCI_LK_CHANGED_COMBINATION)
+ conn->key_type = ev->key_type;
+
hci_conn_put(conn);
}
if (test_bit(HCI_LINK_KEYS, &hdev->flags))
- hci_add_link_key(hdev, 1, &ev->bdaddr, ev->link_key,
+ hci_add_link_key(hdev, conn, 1, &ev->bdaddr, ev->link_key,
ev->key_type, pin_len);
hci_dev_unlock(hdev);
@@ -2136,11 +2211,17 @@
hci_dev_lock(hdev);
+ if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags)) {
+
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_discovering(hdev->id, 1);
+ }
+
if ((skb->len - 1) / num_rsp != sizeof(struct inquiry_info_with_rssi)) {
struct inquiry_info_with_rssi_and_pscan_mode *info;
info = (void *) (skb->data + 1);
- for (; num_rsp; num_rsp--) {
+ for (; num_rsp; num_rsp--, info++) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
@@ -2149,13 +2230,15 @@
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
data.ssp_mode = 0x00;
- info++;
hci_inquiry_cache_update(hdev, &data);
+ mgmt_device_found(hdev->id, &info->bdaddr,
+ info->dev_class, info->rssi,
+ NULL);
}
} else {
struct inquiry_info_with_rssi *info = (void *) (skb->data + 1);
- for (; num_rsp; num_rsp--) {
+ for (; num_rsp; num_rsp--, info++) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
@@ -2164,8 +2247,10 @@
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
data.ssp_mode = 0x00;
- info++;
hci_inquiry_cache_update(hdev, &data);
+ mgmt_device_found(hdev->id, &info->bdaddr,
+ info->dev_class, info->rssi,
+ NULL);
}
}
@@ -2294,9 +2379,15 @@
if (!num_rsp)
return;
+ if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags)) {
+
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_discovering(hdev->id, 1);
+ }
+
hci_dev_lock(hdev);
- for (; num_rsp; num_rsp--) {
+ for (; num_rsp; num_rsp--, info++) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
@@ -2305,8 +2396,9 @@
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
data.ssp_mode = 0x01;
- info++;
hci_inquiry_cache_update(hdev, &data);
+ mgmt_device_found(hdev->id, &info->bdaddr, info->dev_class,
+ info->rssi, info->data);
}
hci_dev_unlock(hdev);
@@ -2326,7 +2418,7 @@
/* If remote requests no-bonding follow that lead */
if (conn->remote_auth == 0x00 || conn->remote_auth == 0x01)
- return 0x00;
+ return conn->remote_auth | (conn->auth_type & 0x01);
return conn->auth_type;
}
@@ -2355,8 +2447,14 @@
bacpy(&cp.bdaddr, &ev->bdaddr);
cp.capability = conn->io_capability;
- cp.oob_data = 0;
- cp.authentication = hci_get_auth_req(conn);
+ conn->auth_type = hci_get_auth_req(conn);
+ cp.authentication = conn->auth_type;
+
+ if ((conn->out == 0x01 || conn->remote_oob == 0x01) &&
+ hci_find_remote_oob_data(hdev, &conn->dst))
+ cp.oob_data = 0x01;
+ else
+ cp.oob_data = 0x00;
hci_send_cmd(hdev, HCI_OP_IO_CAPABILITY_REPLY,
sizeof(cp), &cp);
@@ -2364,7 +2462,7 @@
struct hci_cp_io_capability_neg_reply cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
- cp.reason = 0x16; /* Pairing not allowed */
+ cp.reason = 0x18; /* Pairing not allowed */
hci_send_cmd(hdev, HCI_OP_IO_CAPABILITY_NEG_REPLY,
sizeof(cp), &cp);
@@ -2387,8 +2485,6 @@
if (!conn)
goto unlock;
- hci_conn_hold(conn);
-
conn->remote_cap = ev->capability;
conn->remote_oob = ev->oob_data;
conn->remote_auth = ev->authentication;
@@ -2401,14 +2497,67 @@
struct sk_buff *skb)
{
struct hci_ev_user_confirm_req *ev = (void *) skb->data;
+ int loc_mitm, rem_mitm, confirm_hint = 0;
+ struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
- if (test_bit(HCI_MGMT, &hdev->flags))
- mgmt_user_confirm_request(hdev->id, &ev->bdaddr, ev->passkey);
+ if (!test_bit(HCI_MGMT, &hdev->flags))
+ goto unlock;
+ conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+ if (!conn)
+ goto unlock;
+
+ loc_mitm = (conn->auth_type & 0x01);
+ rem_mitm = (conn->remote_auth & 0x01);
+
+ /* If we require MITM but the remote device can't provide that
+ * (it has NoInputNoOutput) then reject the confirmation
+ * request. The only exception is when we're dedicated bonding
+ * initiators (connect_cfm_cb set) since then we always have the MITM
+ * bit set. */
+ if (!conn->connect_cfm_cb && loc_mitm && conn->remote_cap == 0x03) {
+ BT_DBG("Rejecting request: remote device can't provide MITM");
+ hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_NEG_REPLY,
+ sizeof(ev->bdaddr), &ev->bdaddr);
+ goto unlock;
+ }
+
+ /* If no side requires MITM protection; auto-accept */
+ if ((!loc_mitm || conn->remote_cap == 0x03) &&
+ (!rem_mitm || conn->io_capability == 0x03)) {
+
+ /* If we're not the initiators request authorization to
+ * proceed from user space (mgmt_user_confirm with
+ * confirm_hint set to 1). */
+ if (!test_bit(HCI_CONN_AUTH_PEND, &conn->pend)) {
+ BT_DBG("Confirming auto-accept as acceptor");
+ confirm_hint = 1;
+ goto confirm;
+ }
+
+ BT_DBG("Auto-accept of user confirmation with %ums delay",
+ hdev->auto_accept_delay);
+
+ if (hdev->auto_accept_delay > 0) {
+ int delay = msecs_to_jiffies(hdev->auto_accept_delay);
+ mod_timer(&conn->auto_accept_timer, jiffies + delay);
+ goto unlock;
+ }
+
+ hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_REPLY,
+ sizeof(ev->bdaddr), &ev->bdaddr);
+ goto unlock;
+ }
+
+confirm:
+ mgmt_user_confirm_request(hdev->id, &ev->bdaddr, ev->passkey,
+ confirm_hint);
+
+unlock:
hci_dev_unlock(hdev);
}
@@ -2455,6 +2604,41 @@
hci_dev_unlock(hdev);
}
+static inline void hci_remote_oob_data_request_evt(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_ev_remote_oob_data_request *ev = (void *) skb->data;
+ struct oob_data *data;
+
+ BT_DBG("%s", hdev->name);
+
+ hci_dev_lock(hdev);
+
+ if (!test_bit(HCI_MGMT, &hdev->flags))
+ goto unlock;
+
+ data = hci_find_remote_oob_data(hdev, &ev->bdaddr);
+ if (data) {
+ struct hci_cp_remote_oob_data_reply cp;
+
+ bacpy(&cp.bdaddr, &ev->bdaddr);
+ memcpy(cp.hash, data->hash, sizeof(cp.hash));
+ memcpy(cp.randomizer, data->randomizer, sizeof(cp.randomizer));
+
+ hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_DATA_REPLY, sizeof(cp),
+ &cp);
+ } else {
+ struct hci_cp_remote_oob_data_neg_reply cp;
+
+ bacpy(&cp.bdaddr, &ev->bdaddr);
+ hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_DATA_NEG_REPLY, sizeof(cp),
+ &cp);
+ }
+
+unlock:
+ hci_dev_unlock(hdev);
+}
+
static inline void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_le_conn_complete *ev = (void *) skb->data;
@@ -2475,12 +2659,15 @@
}
if (ev->status) {
+ mgmt_connect_failed(hdev->id, &ev->bdaddr, ev->status);
hci_proto_connect_cfm(conn, ev->status);
conn->state = BT_CLOSED;
hci_conn_del(conn);
goto unlock;
}
+ mgmt_connected(hdev->id, &ev->bdaddr);
+
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
@@ -2657,6 +2844,10 @@
hci_le_meta_evt(hdev, skb);
break;
+ case HCI_EV_REMOTE_OOB_DATA_REQUEST:
+ hci_remote_oob_data_request_evt(hdev, skb);
+ break;
+
default:
BT_DBG("%s event 0x%x", hdev->name, event);
break;
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 3c838a6..a6c3aa8 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -216,13 +216,13 @@
static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
{
struct hci_dev *hdev = dev_get_drvdata(dev);
- char name[249];
+ char name[HCI_MAX_NAME_LENGTH + 1];
int i;
- for (i = 0; i < 248; i++)
+ for (i = 0; i < HCI_MAX_NAME_LENGTH; i++)
name[i] = hdev->dev_name[i];
- name[248] = '\0';
+ name[HCI_MAX_NAME_LENGTH] = '\0';
return sprintf(buf, "%s\n", name);
}
@@ -277,10 +277,12 @@
static ssize_t store_idle_timeout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct hci_dev *hdev = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
+ int rv;
- if (strict_strtoul(buf, 0, &val) < 0)
- return -EINVAL;
+ rv = kstrtouint(buf, 0, &val);
+ if (rv < 0)
+ return rv;
if (val != 0 && (val < 500 || val > 3600000))
return -EINVAL;
@@ -299,15 +301,14 @@
static ssize_t store_sniff_max_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct hci_dev *hdev = dev_get_drvdata(dev);
- unsigned long val;
+ u16 val;
+ int rv;
- if (strict_strtoul(buf, 0, &val) < 0)
- return -EINVAL;
+ rv = kstrtou16(buf, 0, &val);
+ if (rv < 0)
+ return rv;
- if (val < 0x0002 || val > 0xFFFE || val % 2)
- return -EINVAL;
-
- if (val < hdev->sniff_min_interval)
+ if (val == 0 || val % 2 || val < hdev->sniff_min_interval)
return -EINVAL;
hdev->sniff_max_interval = val;
@@ -324,15 +325,14 @@
static ssize_t store_sniff_min_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct hci_dev *hdev = dev_get_drvdata(dev);
- unsigned long val;
+ u16 val;
+ int rv;
- if (strict_strtoul(buf, 0, &val) < 0)
- return -EINVAL;
+ rv = kstrtou16(buf, 0, &val);
+ if (rv < 0)
+ return rv;
- if (val < 0x0002 || val > 0xFFFE || val % 2)
- return -EINVAL;
-
- if (val > hdev->sniff_max_interval)
+ if (val == 0 || val % 2 || val > hdev->sniff_max_interval)
return -EINVAL;
hdev->sniff_min_interval = val;
@@ -511,6 +511,35 @@
.release = single_release,
};
+static int auto_accept_delay_set(void *data, u64 val)
+{
+ struct hci_dev *hdev = data;
+
+ hci_dev_lock_bh(hdev);
+
+ hdev->auto_accept_delay = val;
+
+ hci_dev_unlock_bh(hdev);
+
+ return 0;
+}
+
+static int auto_accept_delay_get(void *data, u64 *val)
+{
+ struct hci_dev *hdev = data;
+
+ hci_dev_lock_bh(hdev);
+
+ *val = hdev->auto_accept_delay;
+
+ hci_dev_unlock_bh(hdev);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(auto_accept_delay_fops, auto_accept_delay_get,
+ auto_accept_delay_set, "%llu\n");
+
int hci_register_sysfs(struct hci_dev *hdev)
{
struct device *dev = &hdev->dev;
@@ -545,6 +574,8 @@
debugfs_create_file("uuids", 0444, hdev->debugfs, hdev, &uuids_fops);
+ debugfs_create_file("auto_accept_delay", 0444, hdev->debugfs, hdev,
+ &auto_accept_delay_fops);
return 0;
}
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 5ec1297..c405a95 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -37,6 +37,7 @@
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <linux/kthread.h>
#include <net/sock.h>
#include <linux/input.h>
@@ -55,22 +56,24 @@
static LIST_HEAD(hidp_session_list);
static unsigned char hidp_keycode[256] = {
- 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
- 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3,
- 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26,
- 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
- 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106,
- 105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
- 72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190,
- 191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113,
- 115,114, 0, 0, 0,121, 0, 89, 93,124, 92, 94, 95, 0, 0, 0,
- 122,123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
- 150,158,159,128,136,177,178,176,142,152,173,140
+ 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36,
+ 37, 38, 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45,
+ 21, 44, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 28, 1,
+ 14, 15, 57, 12, 13, 26, 27, 43, 43, 39, 40, 41, 51, 52,
+ 53, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 87, 88,
+ 99, 70, 119, 110, 102, 104, 111, 107, 109, 106, 105, 108, 103, 69,
+ 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71, 72, 73,
+ 82, 83, 86, 127, 116, 117, 183, 184, 185, 186, 187, 188, 189, 190,
+ 191, 192, 193, 194, 134, 138, 130, 132, 128, 129, 131, 137, 133, 135,
+ 136, 113, 115, 114, 0, 0, 0, 121, 0, 89, 93, 124, 92, 94,
+ 95, 0, 0, 0, 122, 123, 90, 91, 85, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 29, 42, 56, 125, 97, 54, 100, 126, 164, 166, 165, 163, 161, 115,
+ 114, 113, 150, 158, 159, 128, 136, 177, 178, 176, 142, 152, 173, 140
};
static unsigned char hidp_mkeyspat[] = { 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 };
@@ -461,8 +464,7 @@
{
struct hidp_session *session = (struct hidp_session *) arg;
- atomic_inc(&session->terminate);
- hidp_schedule(session);
+ kthread_stop(session->task);
}
static void hidp_set_timer(struct hidp_session *session)
@@ -533,9 +535,7 @@
skb_queue_purge(&session->ctrl_transmit);
skb_queue_purge(&session->intr_transmit);
- /* Kill session thread */
- atomic_inc(&session->terminate);
- hidp_schedule(session);
+ kthread_stop(session->task);
}
}
@@ -694,22 +694,10 @@
struct sock *ctrl_sk = session->ctrl_sock->sk;
struct sock *intr_sk = session->intr_sock->sk;
struct sk_buff *skb;
- int vendor = 0x0000, product = 0x0000;
wait_queue_t ctrl_wait, intr_wait;
BT_DBG("session %p", session);
- if (session->input) {
- vendor = session->input->id.vendor;
- product = session->input->id.product;
- }
-
- if (session->hid) {
- vendor = session->hid->vendor;
- product = session->hid->product;
- }
-
- daemonize("khidpd_%04x%04x", vendor, product);
set_user_nice(current, -15);
init_waitqueue_entry(&ctrl_wait, current);
@@ -718,10 +706,11 @@
add_wait_queue(sk_sleep(intr_sk), &intr_wait);
session->waiting_for_startup = 0;
wake_up_interruptible(&session->startup_queue);
- while (!atomic_read(&session->terminate)) {
+ while (!kthread_should_stop()) {
set_current_state(TASK_INTERRUPTIBLE);
- if (ctrl_sk->sk_state != BT_CONNECTED || intr_sk->sk_state != BT_CONNECTED)
+ if (ctrl_sk->sk_state != BT_CONNECTED ||
+ intr_sk->sk_state != BT_CONNECTED)
break;
while ((skb = skb_dequeue(&ctrl_sk->sk_receive_queue))) {
@@ -965,6 +954,7 @@
int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, struct socket *intr_sock)
{
struct hidp_session *session, *s;
+ int vendor, product;
int err;
BT_DBG("");
@@ -989,8 +979,10 @@
bacpy(&session->bdaddr, &bt_sk(ctrl_sock->sk)->dst);
- session->ctrl_mtu = min_t(uint, l2cap_pi(ctrl_sock->sk)->omtu, l2cap_pi(ctrl_sock->sk)->imtu);
- session->intr_mtu = min_t(uint, l2cap_pi(intr_sock->sk)->omtu, l2cap_pi(intr_sock->sk)->imtu);
+ session->ctrl_mtu = min_t(uint, l2cap_pi(ctrl_sock->sk)->chan->omtu,
+ l2cap_pi(ctrl_sock->sk)->chan->imtu);
+ session->intr_mtu = min_t(uint, l2cap_pi(intr_sock->sk)->chan->omtu,
+ l2cap_pi(intr_sock->sk)->chan->imtu);
BT_DBG("ctrl mtu %d intr mtu %d", session->ctrl_mtu, session->intr_mtu);
@@ -1026,9 +1018,24 @@
hidp_set_timer(session);
- err = kernel_thread(hidp_session, session, CLONE_KERNEL);
- if (err < 0)
+ if (session->hid) {
+ vendor = session->hid->vendor;
+ product = session->hid->product;
+ } else if (session->input) {
+ vendor = session->input->id.vendor;
+ product = session->input->id.product;
+ } else {
+ vendor = 0x0000;
+ product = 0x0000;
+ }
+
+ session->task = kthread_run(hidp_session, session, "khidpd_%04x%04x",
+ vendor, product);
+ if (IS_ERR(session->task)) {
+ err = PTR_ERR(session->task);
goto unlink;
+ }
+
while (session->waiting_for_startup) {
wait_event_interruptible(session->startup_queue,
!session->waiting_for_startup);
@@ -1053,8 +1060,7 @@
err_add_device:
hid_destroy_device(session->hid);
session->hid = NULL;
- atomic_inc(&session->terminate);
- hidp_schedule(session);
+ kthread_stop(session->task);
unlink:
hidp_del_timer(session);
@@ -1105,13 +1111,7 @@
skb_queue_purge(&session->ctrl_transmit);
skb_queue_purge(&session->intr_transmit);
- /* Wakeup user-space polling for socket errors */
- session->intr_sock->sk->sk_err = EUNATCH;
- session->ctrl_sock->sk->sk_err = EUNATCH;
-
- /* Kill session thread */
- atomic_inc(&session->terminate);
- hidp_schedule(session);
+ kthread_stop(session->task);
}
} else
err = -ENOENT;
diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h
index 13de5fa..12822cd 100644
--- a/net/bluetooth/hidp/hidp.h
+++ b/net/bluetooth/hidp/hidp.h
@@ -84,8 +84,8 @@
#define HIDP_WAITING_FOR_SEND_ACK 11
struct hidp_connadd_req {
- int ctrl_sock; // Connected control socket
- int intr_sock; // Connteted interrupt socket
+ int ctrl_sock; /* Connected control socket */
+ int intr_sock; /* Connected interrupt socket */
__u16 parser;
__u16 rd_size;
__u8 __user *rd_data;
@@ -142,7 +142,7 @@
uint ctrl_mtu;
uint intr_mtu;
- atomic_t terminate;
+ struct task_struct *task;
unsigned char keys[8];
unsigned char leds;
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 250dfd4..178ac7f 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -85,7 +85,8 @@
return err;
}
- if (csock->sk->sk_state != BT_CONNECTED || isock->sk->sk_state != BT_CONNECTED) {
+ if (csock->sk->sk_state != BT_CONNECTED ||
+ isock->sk->sk_state != BT_CONNECTED) {
sockfd_put(csock);
sockfd_put(isock);
return -EBADFD;
@@ -140,8 +141,8 @@
#ifdef CONFIG_COMPAT
struct compat_hidp_connadd_req {
- int ctrl_sock; // Connected control socket
- int intr_sock; // Connteted interrupt socket
+ int ctrl_sock; /* Connected control socket */
+ int intr_sock; /* Connected interrupt socket */
__u16 parser;
__u16 rd_size;
compat_uptr_t rd_data;
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index ca27f3a..a86f9ba 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -62,168 +62,233 @@
static struct workqueue_struct *_busy_wq;
-struct bt_sock_list l2cap_sk_list = {
- .lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
-};
+LIST_HEAD(chan_list);
+DEFINE_RWLOCK(chan_list_lock);
static void l2cap_busy_work(struct work_struct *work);
static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
u8 code, u8 ident, u16 dlen, void *data);
+static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data);
static int l2cap_ertm_data_rcv(struct sock *sk, struct sk_buff *skb);
/* ---- L2CAP channels ---- */
-static struct sock *__l2cap_get_chan_by_dcid(struct l2cap_chan_list *l, u16 cid)
+static struct l2cap_chan *__l2cap_get_chan_by_dcid(struct l2cap_conn *conn, u16 cid)
{
- struct sock *s;
- for (s = l->head; s; s = l2cap_pi(s)->next_c) {
- if (l2cap_pi(s)->dcid == cid)
- break;
+ struct l2cap_chan *c;
+
+ list_for_each_entry(c, &conn->chan_l, list) {
+ if (c->dcid == cid)
+ return c;
}
- return s;
+ return NULL;
+
}
-static struct sock *__l2cap_get_chan_by_scid(struct l2cap_chan_list *l, u16 cid)
+static struct l2cap_chan *__l2cap_get_chan_by_scid(struct l2cap_conn *conn, u16 cid)
{
- struct sock *s;
- for (s = l->head; s; s = l2cap_pi(s)->next_c) {
- if (l2cap_pi(s)->scid == cid)
- break;
+ struct l2cap_chan *c;
+
+ list_for_each_entry(c, &conn->chan_l, list) {
+ if (c->scid == cid)
+ return c;
}
- return s;
+ return NULL;
}
/* Find channel with given SCID.
* Returns locked socket */
-static inline struct sock *l2cap_get_chan_by_scid(struct l2cap_chan_list *l, u16 cid)
+static struct l2cap_chan *l2cap_get_chan_by_scid(struct l2cap_conn *conn, u16 cid)
{
- struct sock *s;
- read_lock(&l->lock);
- s = __l2cap_get_chan_by_scid(l, cid);
- if (s)
- bh_lock_sock(s);
- read_unlock(&l->lock);
- return s;
+ struct l2cap_chan *c;
+
+ read_lock(&conn->chan_lock);
+ c = __l2cap_get_chan_by_scid(conn, cid);
+ if (c)
+ bh_lock_sock(c->sk);
+ read_unlock(&conn->chan_lock);
+ return c;
}
-static struct sock *__l2cap_get_chan_by_ident(struct l2cap_chan_list *l, u8 ident)
+static struct l2cap_chan *__l2cap_get_chan_by_ident(struct l2cap_conn *conn, u8 ident)
{
- struct sock *s;
- for (s = l->head; s; s = l2cap_pi(s)->next_c) {
- if (l2cap_pi(s)->ident == ident)
- break;
+ struct l2cap_chan *c;
+
+ list_for_each_entry(c, &conn->chan_l, list) {
+ if (c->ident == ident)
+ return c;
}
- return s;
+ return NULL;
}
-static inline struct sock *l2cap_get_chan_by_ident(struct l2cap_chan_list *l, u8 ident)
+static inline struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn, u8 ident)
{
- struct sock *s;
- read_lock(&l->lock);
- s = __l2cap_get_chan_by_ident(l, ident);
- if (s)
- bh_lock_sock(s);
- read_unlock(&l->lock);
- return s;
+ struct l2cap_chan *c;
+
+ read_lock(&conn->chan_lock);
+ c = __l2cap_get_chan_by_ident(conn, ident);
+ if (c)
+ bh_lock_sock(c->sk);
+ read_unlock(&conn->chan_lock);
+ return c;
}
-static u16 l2cap_alloc_cid(struct l2cap_chan_list *l)
+static struct l2cap_chan *__l2cap_global_chan_by_addr(__le16 psm, bdaddr_t *src)
+{
+ struct l2cap_chan *c;
+
+ list_for_each_entry(c, &chan_list, global_l) {
+ if (c->sport == psm && !bacmp(&bt_sk(c->sk)->src, src))
+ goto found;
+ }
+
+ c = NULL;
+found:
+ return c;
+}
+
+int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
+{
+ int err;
+
+ write_lock_bh(&chan_list_lock);
+
+ if (psm && __l2cap_global_chan_by_addr(psm, src)) {
+ err = -EADDRINUSE;
+ goto done;
+ }
+
+ if (psm) {
+ chan->psm = psm;
+ chan->sport = psm;
+ err = 0;
+ } else {
+ u16 p;
+
+ err = -EINVAL;
+ for (p = 0x1001; p < 0x1100; p += 2)
+ if (!__l2cap_global_chan_by_addr(cpu_to_le16(p), src)) {
+ chan->psm = cpu_to_le16(p);
+ chan->sport = cpu_to_le16(p);
+ err = 0;
+ break;
+ }
+ }
+
+done:
+ write_unlock_bh(&chan_list_lock);
+ return err;
+}
+
+int l2cap_add_scid(struct l2cap_chan *chan, __u16 scid)
+{
+ write_lock_bh(&chan_list_lock);
+
+ chan->scid = scid;
+
+ write_unlock_bh(&chan_list_lock);
+
+ return 0;
+}
+
+static u16 l2cap_alloc_cid(struct l2cap_conn *conn)
{
u16 cid = L2CAP_CID_DYN_START;
for (; cid < L2CAP_CID_DYN_END; cid++) {
- if (!__l2cap_get_chan_by_scid(l, cid))
+ if (!__l2cap_get_chan_by_scid(conn, cid))
return cid;
}
return 0;
}
-static inline void __l2cap_chan_link(struct l2cap_chan_list *l, struct sock *sk)
+struct l2cap_chan *l2cap_chan_create(struct sock *sk)
{
- sock_hold(sk);
+ struct l2cap_chan *chan;
- if (l->head)
- l2cap_pi(l->head)->prev_c = sk;
+ chan = kzalloc(sizeof(*chan), GFP_ATOMIC);
+ if (!chan)
+ return NULL;
- l2cap_pi(sk)->next_c = l->head;
- l2cap_pi(sk)->prev_c = NULL;
- l->head = sk;
+ chan->sk = sk;
+
+ write_lock_bh(&chan_list_lock);
+ list_add(&chan->global_l, &chan_list);
+ write_unlock_bh(&chan_list_lock);
+
+ return chan;
}
-static inline void l2cap_chan_unlink(struct l2cap_chan_list *l, struct sock *sk)
+void l2cap_chan_destroy(struct l2cap_chan *chan)
{
- struct sock *next = l2cap_pi(sk)->next_c, *prev = l2cap_pi(sk)->prev_c;
+ write_lock_bh(&chan_list_lock);
+ list_del(&chan->global_l);
+ write_unlock_bh(&chan_list_lock);
- write_lock_bh(&l->lock);
- if (sk == l->head)
- l->head = next;
-
- if (next)
- l2cap_pi(next)->prev_c = prev;
- if (prev)
- l2cap_pi(prev)->next_c = next;
- write_unlock_bh(&l->lock);
-
- __sock_put(sk);
+ kfree(chan);
}
-static void __l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct sock *parent)
+static void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan)
{
- struct l2cap_chan_list *l = &conn->chan_list;
+ struct sock *sk = chan->sk;
BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn,
- l2cap_pi(sk)->psm, l2cap_pi(sk)->dcid);
+ chan->psm, chan->dcid);
conn->disc_reason = 0x13;
- l2cap_pi(sk)->conn = conn;
+ chan->conn = conn;
if (sk->sk_type == SOCK_SEQPACKET || sk->sk_type == SOCK_STREAM) {
if (conn->hcon->type == LE_LINK) {
/* LE connection */
- l2cap_pi(sk)->omtu = L2CAP_LE_DEFAULT_MTU;
- l2cap_pi(sk)->scid = L2CAP_CID_LE_DATA;
- l2cap_pi(sk)->dcid = L2CAP_CID_LE_DATA;
+ chan->omtu = L2CAP_LE_DEFAULT_MTU;
+ chan->scid = L2CAP_CID_LE_DATA;
+ chan->dcid = L2CAP_CID_LE_DATA;
} else {
/* Alloc CID for connection-oriented socket */
- l2cap_pi(sk)->scid = l2cap_alloc_cid(l);
- l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
+ chan->scid = l2cap_alloc_cid(conn);
+ chan->omtu = L2CAP_DEFAULT_MTU;
}
} else if (sk->sk_type == SOCK_DGRAM) {
/* Connectionless socket */
- l2cap_pi(sk)->scid = L2CAP_CID_CONN_LESS;
- l2cap_pi(sk)->dcid = L2CAP_CID_CONN_LESS;
- l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
+ chan->scid = L2CAP_CID_CONN_LESS;
+ chan->dcid = L2CAP_CID_CONN_LESS;
+ chan->omtu = L2CAP_DEFAULT_MTU;
} else {
/* Raw socket can send/recv signalling messages only */
- l2cap_pi(sk)->scid = L2CAP_CID_SIGNALING;
- l2cap_pi(sk)->dcid = L2CAP_CID_SIGNALING;
- l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
+ chan->scid = L2CAP_CID_SIGNALING;
+ chan->dcid = L2CAP_CID_SIGNALING;
+ chan->omtu = L2CAP_DEFAULT_MTU;
}
- __l2cap_chan_link(l, sk);
+ sock_hold(sk);
- if (parent)
- bt_accept_enqueue(parent, sk);
+ list_add(&chan->list, &conn->chan_l);
}
/* Delete channel.
* Must be called on the locked socket. */
-void l2cap_chan_del(struct sock *sk, int err)
+void l2cap_chan_del(struct l2cap_chan *chan, int err)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sock *sk = chan->sk;
+ struct l2cap_conn *conn = chan->conn;
struct sock *parent = bt_sk(sk)->parent;
l2cap_sock_clear_timer(sk);
- BT_DBG("sk %p, conn %p, err %d", sk, conn, err);
+ BT_DBG("chan %p, conn %p, err %d", chan, conn, err);
if (conn) {
- /* Unlink from channel list */
- l2cap_chan_unlink(&conn->chan_list, sk);
- l2cap_pi(sk)->conn = NULL;
+ /* Delete from channel list */
+ write_lock_bh(&conn->chan_lock);
+ list_del(&chan->list);
+ write_unlock_bh(&conn->chan_lock);
+ __sock_put(sk);
+
+ chan->conn = NULL;
hci_conn_put(conn->hcon);
}
@@ -239,29 +304,35 @@
} else
sk->sk_state_change(sk);
- skb_queue_purge(TX_QUEUE(sk));
+ if (!(chan->conf_state & L2CAP_CONF_OUTPUT_DONE &&
+ chan->conf_state & L2CAP_CONF_INPUT_DONE))
+ return;
- if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM) {
+ skb_queue_purge(&chan->tx_q);
+
+ if (chan->mode == L2CAP_MODE_ERTM) {
struct srej_list *l, *tmp;
- del_timer(&l2cap_pi(sk)->retrans_timer);
- del_timer(&l2cap_pi(sk)->monitor_timer);
- del_timer(&l2cap_pi(sk)->ack_timer);
+ del_timer(&chan->retrans_timer);
+ del_timer(&chan->monitor_timer);
+ del_timer(&chan->ack_timer);
- skb_queue_purge(SREJ_QUEUE(sk));
- skb_queue_purge(BUSY_QUEUE(sk));
+ skb_queue_purge(&chan->srej_q);
+ skb_queue_purge(&chan->busy_q);
- list_for_each_entry_safe(l, tmp, SREJ_LIST(sk), list) {
+ list_for_each_entry_safe(l, tmp, &chan->srej_l, list) {
list_del(&l->list);
kfree(l);
}
}
}
-static inline u8 l2cap_get_auth_type(struct sock *sk)
+static inline u8 l2cap_get_auth_type(struct l2cap_chan *chan)
{
+ struct sock *sk = chan->sk;
+
if (sk->sk_type == SOCK_RAW) {
- switch (l2cap_pi(sk)->sec_level) {
+ switch (chan->sec_level) {
case BT_SECURITY_HIGH:
return HCI_AT_DEDICATED_BONDING_MITM;
case BT_SECURITY_MEDIUM:
@@ -269,16 +340,16 @@
default:
return HCI_AT_NO_BONDING;
}
- } else if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001)) {
- if (l2cap_pi(sk)->sec_level == BT_SECURITY_LOW)
- l2cap_pi(sk)->sec_level = BT_SECURITY_SDP;
+ } else if (chan->psm == cpu_to_le16(0x0001)) {
+ if (chan->sec_level == BT_SECURITY_LOW)
+ chan->sec_level = BT_SECURITY_SDP;
- if (l2cap_pi(sk)->sec_level == BT_SECURITY_HIGH)
+ if (chan->sec_level == BT_SECURITY_HIGH)
return HCI_AT_NO_BONDING_MITM;
else
return HCI_AT_NO_BONDING;
} else {
- switch (l2cap_pi(sk)->sec_level) {
+ switch (chan->sec_level) {
case BT_SECURITY_HIGH:
return HCI_AT_GENERAL_BONDING_MITM;
case BT_SECURITY_MEDIUM:
@@ -290,15 +361,14 @@
}
/* Service level security */
-static inline int l2cap_check_security(struct sock *sk)
+static inline int l2cap_check_security(struct l2cap_chan *chan)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct l2cap_conn *conn = chan->conn;
__u8 auth_type;
- auth_type = l2cap_get_auth_type(sk);
+ auth_type = l2cap_get_auth_type(chan);
- return hci_conn_security(conn->hcon, l2cap_pi(sk)->sec_level,
- auth_type);
+ return hci_conn_security(conn->hcon, chan->sec_level, auth_type);
}
u8 l2cap_get_ident(struct l2cap_conn *conn)
@@ -341,11 +411,12 @@
hci_send_acl(conn->hcon, skb, flags);
}
-static inline void l2cap_send_sframe(struct l2cap_pinfo *pi, u16 control)
+static inline void l2cap_send_sframe(struct l2cap_chan *chan, u16 control)
{
struct sk_buff *skb;
struct l2cap_hdr *lh;
- struct l2cap_conn *conn = pi->conn;
+ struct l2cap_pinfo *pi = l2cap_pi(chan->sk);
+ struct l2cap_conn *conn = chan->conn;
struct sock *sk = (struct sock *)pi;
int count, hlen = L2CAP_HDR_SIZE + 2;
u8 flags;
@@ -353,22 +424,22 @@
if (sk->sk_state != BT_CONNECTED)
return;
- if (pi->fcs == L2CAP_FCS_CRC16)
+ if (chan->fcs == L2CAP_FCS_CRC16)
hlen += 2;
- BT_DBG("pi %p, control 0x%2.2x", pi, control);
+ BT_DBG("chan %p, control 0x%2.2x", chan, control);
count = min_t(unsigned int, conn->mtu, hlen);
control |= L2CAP_CTRL_FRAME_TYPE;
- if (pi->conn_state & L2CAP_CONN_SEND_FBIT) {
+ if (chan->conn_state & L2CAP_CONN_SEND_FBIT) {
control |= L2CAP_CTRL_FINAL;
- pi->conn_state &= ~L2CAP_CONN_SEND_FBIT;
+ chan->conn_state &= ~L2CAP_CONN_SEND_FBIT;
}
- if (pi->conn_state & L2CAP_CONN_SEND_PBIT) {
+ if (chan->conn_state & L2CAP_CONN_SEND_PBIT) {
control |= L2CAP_CTRL_POLL;
- pi->conn_state &= ~L2CAP_CONN_SEND_PBIT;
+ chan->conn_state &= ~L2CAP_CONN_SEND_PBIT;
}
skb = bt_skb_alloc(count, GFP_ATOMIC);
@@ -377,10 +448,10 @@
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->len = cpu_to_le16(hlen - L2CAP_HDR_SIZE);
- lh->cid = cpu_to_le16(pi->dcid);
+ lh->cid = cpu_to_le16(chan->dcid);
put_unaligned_le16(control, skb_put(skb, 2));
- if (pi->fcs == L2CAP_FCS_CRC16) {
+ if (chan->fcs == L2CAP_FCS_CRC16) {
u16 fcs = crc16(0, (u8 *)lh, count - 2);
put_unaligned_le16(fcs, skb_put(skb, 2));
}
@@ -390,45 +461,46 @@
else
flags = ACL_START;
- hci_send_acl(pi->conn->hcon, skb, flags);
+ hci_send_acl(chan->conn->hcon, skb, flags);
}
-static inline void l2cap_send_rr_or_rnr(struct l2cap_pinfo *pi, u16 control)
+static inline void l2cap_send_rr_or_rnr(struct l2cap_chan *chan, u16 control)
{
- if (pi->conn_state & L2CAP_CONN_LOCAL_BUSY) {
+ if (chan->conn_state & L2CAP_CONN_LOCAL_BUSY) {
control |= L2CAP_SUPER_RCV_NOT_READY;
- pi->conn_state |= L2CAP_CONN_RNR_SENT;
+ chan->conn_state |= L2CAP_CONN_RNR_SENT;
} else
control |= L2CAP_SUPER_RCV_READY;
- control |= pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ control |= chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
- l2cap_send_sframe(pi, control);
+ l2cap_send_sframe(chan, control);
}
-static inline int __l2cap_no_conn_pending(struct sock *sk)
+static inline int __l2cap_no_conn_pending(struct l2cap_chan *chan)
{
- return !(l2cap_pi(sk)->conf_state & L2CAP_CONF_CONNECT_PEND);
+ return !(chan->conf_state & L2CAP_CONF_CONNECT_PEND);
}
-static void l2cap_do_start(struct sock *sk)
+static void l2cap_do_start(struct l2cap_chan *chan)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct l2cap_conn *conn = chan->conn;
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) {
if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
return;
- if (l2cap_check_security(sk) && __l2cap_no_conn_pending(sk)) {
+ if (l2cap_check_security(chan) &&
+ __l2cap_no_conn_pending(chan)) {
struct l2cap_conn_req req;
- req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
- req.psm = l2cap_pi(sk)->psm;
+ req.scid = cpu_to_le16(chan->scid);
+ req.psm = chan->psm;
- l2cap_pi(sk)->ident = l2cap_get_ident(conn);
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
+ chan->ident = l2cap_get_ident(conn);
+ chan->conf_state |= L2CAP_CONF_CONNECT_PEND;
- l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
- L2CAP_CONN_REQ, sizeof(req), &req);
+ l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ,
+ sizeof(req), &req);
}
} else {
struct l2cap_info_req req;
@@ -461,23 +533,24 @@
}
}
-void l2cap_send_disconn_req(struct l2cap_conn *conn, struct sock *sk, int err)
+void l2cap_send_disconn_req(struct l2cap_conn *conn, struct l2cap_chan *chan, int err)
{
+ struct sock *sk;
struct l2cap_disconn_req req;
if (!conn)
return;
- skb_queue_purge(TX_QUEUE(sk));
+ sk = chan->sk;
- if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM) {
- del_timer(&l2cap_pi(sk)->retrans_timer);
- del_timer(&l2cap_pi(sk)->monitor_timer);
- del_timer(&l2cap_pi(sk)->ack_timer);
+ if (chan->mode == L2CAP_MODE_ERTM) {
+ del_timer(&chan->retrans_timer);
+ del_timer(&chan->monitor_timer);
+ del_timer(&chan->ack_timer);
}
- req.dcid = cpu_to_le16(l2cap_pi(sk)->dcid);
- req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
+ req.dcid = cpu_to_le16(chan->dcid);
+ req.scid = cpu_to_le16(chan->scid);
l2cap_send_cmd(conn, l2cap_get_ident(conn),
L2CAP_DISCONN_REQ, sizeof(req), &req);
@@ -488,17 +561,15 @@
/* ---- L2CAP connections ---- */
static void l2cap_conn_start(struct l2cap_conn *conn)
{
- struct l2cap_chan_list *l = &conn->chan_list;
- struct sock_del_list del, *tmp1, *tmp2;
- struct sock *sk;
+ struct l2cap_chan *chan, *tmp;
BT_DBG("conn %p", conn);
- INIT_LIST_HEAD(&del.list);
+ read_lock(&conn->chan_lock);
- read_lock(&l->lock);
+ list_for_each_entry_safe(chan, tmp, &conn->chan_l, list) {
+ struct sock *sk = chan->sk;
- for (sk = l->head; sk; sk = l2cap_pi(sk)->next_c) {
bh_lock_sock(sk);
if (sk->sk_type != SOCK_SEQPACKET &&
@@ -510,40 +581,41 @@
if (sk->sk_state == BT_CONNECT) {
struct l2cap_conn_req req;
- if (!l2cap_check_security(sk) ||
- !__l2cap_no_conn_pending(sk)) {
+ if (!l2cap_check_security(chan) ||
+ !__l2cap_no_conn_pending(chan)) {
bh_unlock_sock(sk);
continue;
}
- if (!l2cap_mode_supported(l2cap_pi(sk)->mode,
+ if (!l2cap_mode_supported(chan->mode,
conn->feat_mask)
- && l2cap_pi(sk)->conf_state &
+ && chan->conf_state &
L2CAP_CONF_STATE2_DEVICE) {
- tmp1 = kzalloc(sizeof(struct sock_del_list),
- GFP_ATOMIC);
- tmp1->sk = sk;
- list_add_tail(&tmp1->list, &del.list);
+ /* __l2cap_sock_close() calls list_del(chan)
+ * so release the lock */
+ read_unlock_bh(&conn->chan_lock);
+ __l2cap_sock_close(sk, ECONNRESET);
+ read_lock_bh(&conn->chan_lock);
bh_unlock_sock(sk);
continue;
}
- req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
- req.psm = l2cap_pi(sk)->psm;
+ req.scid = cpu_to_le16(chan->scid);
+ req.psm = chan->psm;
- l2cap_pi(sk)->ident = l2cap_get_ident(conn);
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
+ chan->ident = l2cap_get_ident(conn);
+ chan->conf_state |= L2CAP_CONF_CONNECT_PEND;
- l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
- L2CAP_CONN_REQ, sizeof(req), &req);
+ l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ,
+ sizeof(req), &req);
} else if (sk->sk_state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
char buf[128];
- rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
- rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
+ rsp.scid = cpu_to_le16(chan->dcid);
+ rsp.dcid = cpu_to_le16(chan->scid);
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(chan)) {
if (bt_sk(sk)->defer_setup) {
struct sock *parent = bt_sk(sk)->parent;
rsp.result = cpu_to_le16(L2CAP_CR_PEND);
@@ -560,80 +632,77 @@
rsp.status = cpu_to_le16(L2CAP_CS_AUTHEN_PEND);
}
- l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
- L2CAP_CONN_RSP, sizeof(rsp), &rsp);
+ l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
+ sizeof(rsp), &rsp);
- if (l2cap_pi(sk)->conf_state & L2CAP_CONF_REQ_SENT ||
+ if (chan->conf_state & L2CAP_CONF_REQ_SENT ||
rsp.result != L2CAP_CR_SUCCESS) {
bh_unlock_sock(sk);
continue;
}
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
+ chan->conf_state |= L2CAP_CONF_REQ_SENT;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
- l2cap_build_conf_req(sk, buf), buf);
- l2cap_pi(sk)->num_conf_req++;
+ l2cap_build_conf_req(chan, buf), buf);
+ chan->num_conf_req++;
}
bh_unlock_sock(sk);
}
- read_unlock(&l->lock);
-
- list_for_each_entry_safe(tmp1, tmp2, &del.list, list) {
- bh_lock_sock(tmp1->sk);
- __l2cap_sock_close(tmp1->sk, ECONNRESET);
- bh_unlock_sock(tmp1->sk);
- list_del(&tmp1->list);
- kfree(tmp1);
- }
+ read_unlock(&conn->chan_lock);
}
/* Find socket with cid and source bdaddr.
* Returns closest match, locked.
*/
-static struct sock *l2cap_get_sock_by_scid(int state, __le16 cid, bdaddr_t *src)
+static struct l2cap_chan *l2cap_global_chan_by_scid(int state, __le16 cid, bdaddr_t *src)
{
- struct sock *s, *sk = NULL, *sk1 = NULL;
- struct hlist_node *node;
+ struct l2cap_chan *c, *c1 = NULL;
- read_lock(&l2cap_sk_list.lock);
+ read_lock(&chan_list_lock);
- sk_for_each(sk, node, &l2cap_sk_list.head) {
+ list_for_each_entry(c, &chan_list, global_l) {
+ struct sock *sk = c->sk;
+
if (state && sk->sk_state != state)
continue;
- if (l2cap_pi(sk)->scid == cid) {
+ if (c->scid == cid) {
/* Exact match. */
- if (!bacmp(&bt_sk(sk)->src, src))
- break;
+ if (!bacmp(&bt_sk(sk)->src, src)) {
+ read_unlock(&chan_list_lock);
+ return c;
+ }
/* Closest match */
if (!bacmp(&bt_sk(sk)->src, BDADDR_ANY))
- sk1 = sk;
+ c1 = c;
}
}
- s = node ? sk : sk1;
- if (s)
- bh_lock_sock(s);
- read_unlock(&l2cap_sk_list.lock);
- return s;
+ read_unlock(&chan_list_lock);
+
+ return c1;
}
static void l2cap_le_conn_ready(struct l2cap_conn *conn)
{
- struct l2cap_chan_list *list = &conn->chan_list;
- struct sock *parent, *uninitialized_var(sk);
+ struct sock *parent, *sk;
+ struct l2cap_chan *chan, *pchan;
BT_DBG("");
/* Check if we have socket listening on cid */
- parent = l2cap_get_sock_by_scid(BT_LISTEN, L2CAP_CID_LE_DATA,
+ pchan = l2cap_global_chan_by_scid(BT_LISTEN, L2CAP_CID_LE_DATA,
conn->src);
- if (!parent)
+ if (!pchan)
return;
+ parent = pchan->sk;
+
+ bh_lock_sock(parent);
+
/* Check for backlog size */
if (sk_acceptq_is_full(parent)) {
BT_DBG("backlog full %d", parent->sk_ack_backlog);
@@ -644,22 +713,33 @@
if (!sk)
goto clean;
- write_lock_bh(&list->lock);
+ chan = l2cap_chan_create(sk);
+ if (!chan) {
+ l2cap_sock_kill(sk);
+ goto clean;
+ }
+
+ l2cap_pi(sk)->chan = chan;
+
+ write_lock_bh(&conn->chan_lock);
hci_conn_hold(conn->hcon);
l2cap_sock_init(sk, parent);
+
bacpy(&bt_sk(sk)->src, conn->src);
bacpy(&bt_sk(sk)->dst, conn->dst);
- __l2cap_chan_add(conn, sk, parent);
+ bt_accept_enqueue(parent, sk);
+
+ __l2cap_chan_add(conn, chan);
l2cap_sock_set_timer(sk, sk->sk_sndtimeo);
sk->sk_state = BT_CONNECTED;
parent->sk_data_ready(parent, 0);
- write_unlock_bh(&list->lock);
+ write_unlock_bh(&conn->chan_lock);
clean:
bh_unlock_sock(parent);
@@ -667,17 +747,18 @@
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
- struct l2cap_chan_list *l = &conn->chan_list;
- struct sock *sk;
+ struct l2cap_chan *chan;
BT_DBG("conn %p", conn);
if (!conn->hcon->out && conn->hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
- read_lock(&l->lock);
+ read_lock(&conn->chan_lock);
- for (sk = l->head; sk; sk = l2cap_pi(sk)->next_c) {
+ list_for_each_entry(chan, &conn->chan_l, list) {
+ struct sock *sk = chan->sk;
+
bh_lock_sock(sk);
if (conn->hcon->type == LE_LINK) {
@@ -692,30 +773,31 @@
sk->sk_state = BT_CONNECTED;
sk->sk_state_change(sk);
} else if (sk->sk_state == BT_CONNECT)
- l2cap_do_start(sk);
+ l2cap_do_start(chan);
bh_unlock_sock(sk);
}
- read_unlock(&l->lock);
+ read_unlock(&conn->chan_lock);
}
/* Notify sockets that we cannot guaranty reliability anymore */
static void l2cap_conn_unreliable(struct l2cap_conn *conn, int err)
{
- struct l2cap_chan_list *l = &conn->chan_list;
- struct sock *sk;
+ struct l2cap_chan *chan;
BT_DBG("conn %p", conn);
- read_lock(&l->lock);
+ read_lock(&conn->chan_lock);
- for (sk = l->head; sk; sk = l2cap_pi(sk)->next_c) {
- if (l2cap_pi(sk)->force_reliable)
+ list_for_each_entry(chan, &conn->chan_l, list) {
+ struct sock *sk = chan->sk;
+
+ if (chan->force_reliable)
sk->sk_err = err;
}
- read_unlock(&l->lock);
+ read_unlock(&conn->chan_lock);
}
static void l2cap_info_timeout(unsigned long arg)
@@ -755,7 +837,9 @@
conn->feat_mask = 0;
spin_lock_init(&conn->lock);
- rwlock_init(&conn->chan_list.lock);
+ rwlock_init(&conn->chan_lock);
+
+ INIT_LIST_HEAD(&conn->chan_l);
if (hcon->type != LE_LINK)
setup_timer(&conn->info_timer, l2cap_info_timeout,
@@ -769,6 +853,7 @@
static void l2cap_conn_del(struct hci_conn *hcon, int err)
{
struct l2cap_conn *conn = hcon->l2cap_data;
+ struct l2cap_chan *chan, *l;
struct sock *sk;
if (!conn)
@@ -779,9 +864,10 @@
kfree_skb(conn->rx_skb);
/* Kill channels */
- while ((sk = conn->chan_list.head)) {
+ list_for_each_entry_safe(chan, l, &conn->chan_l, list) {
+ sk = chan->sk;
bh_lock_sock(sk);
- l2cap_chan_del(sk, err);
+ l2cap_chan_del(chan, err);
bh_unlock_sock(sk);
l2cap_sock_kill(sk);
}
@@ -793,12 +879,11 @@
kfree(conn);
}
-static inline void l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct sock *parent)
+static inline void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan)
{
- struct l2cap_chan_list *l = &conn->chan_list;
- write_lock_bh(&l->lock);
- __l2cap_chan_add(conn, sk, parent);
- write_unlock_bh(&l->lock);
+ write_lock_bh(&conn->chan_lock);
+ __l2cap_chan_add(conn, chan);
+ write_unlock_bh(&conn->chan_lock);
}
/* ---- Socket interface ---- */
@@ -806,35 +891,39 @@
/* Find socket with psm and source bdaddr.
* Returns closest match.
*/
-static struct sock *l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t *src)
+static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr_t *src)
{
- struct sock *sk = NULL, *sk1 = NULL;
- struct hlist_node *node;
+ struct l2cap_chan *c, *c1 = NULL;
- read_lock(&l2cap_sk_list.lock);
+ read_lock(&chan_list_lock);
- sk_for_each(sk, node, &l2cap_sk_list.head) {
+ list_for_each_entry(c, &chan_list, global_l) {
+ struct sock *sk = c->sk;
+
if (state && sk->sk_state != state)
continue;
- if (l2cap_pi(sk)->psm == psm) {
+ if (c->psm == psm) {
/* Exact match. */
- if (!bacmp(&bt_sk(sk)->src, src))
- break;
+ if (!bacmp(&bt_sk(sk)->src, src)) {
+ read_unlock_bh(&chan_list_lock);
+ return c;
+ }
/* Closest match */
if (!bacmp(&bt_sk(sk)->src, BDADDR_ANY))
- sk1 = sk;
+ c1 = c;
}
}
- read_unlock(&l2cap_sk_list.lock);
+ read_unlock(&chan_list_lock);
- return node ? sk : sk1;
+ return c1;
}
-int l2cap_do_connect(struct sock *sk)
+int l2cap_chan_connect(struct l2cap_chan *chan)
{
+ struct sock *sk = chan->sk;
bdaddr_t *src = &bt_sk(sk)->src;
bdaddr_t *dst = &bt_sk(sk)->dst;
struct l2cap_conn *conn;
@@ -844,7 +933,7 @@
int err;
BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst),
- l2cap_pi(sk)->psm);
+ chan->psm);
hdev = hci_get_route(dst, src);
if (!hdev)
@@ -852,14 +941,14 @@
hci_dev_lock_bh(hdev);
- auth_type = l2cap_get_auth_type(sk);
+ auth_type = l2cap_get_auth_type(chan);
- if (l2cap_pi(sk)->dcid == L2CAP_CID_LE_DATA)
+ if (chan->dcid == L2CAP_CID_LE_DATA)
hcon = hci_connect(hdev, LE_LINK, dst,
- l2cap_pi(sk)->sec_level, auth_type);
+ chan->sec_level, auth_type);
else
hcon = hci_connect(hdev, ACL_LINK, dst,
- l2cap_pi(sk)->sec_level, auth_type);
+ chan->sec_level, auth_type);
if (IS_ERR(hcon)) {
err = PTR_ERR(hcon);
@@ -876,7 +965,7 @@
/* Update source addr of the socket */
bacpy(src, conn->src);
- l2cap_chan_add(conn, sk, NULL);
+ l2cap_chan_add(conn, chan);
sk->sk_state = BT_CONNECT;
l2cap_sock_set_timer(sk, sk->sk_sndtimeo);
@@ -885,10 +974,10 @@
if (sk->sk_type != SOCK_SEQPACKET &&
sk->sk_type != SOCK_STREAM) {
l2cap_sock_clear_timer(sk);
- if (l2cap_check_security(sk))
+ if (l2cap_check_security(chan))
sk->sk_state = BT_CONNECTED;
} else
- l2cap_do_start(sk);
+ l2cap_do_start(chan);
}
err = 0;
@@ -901,12 +990,13 @@
int __l2cap_wait_ack(struct sock *sk)
{
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
DECLARE_WAITQUEUE(wait, current);
int err = 0;
int timeo = HZ/5;
add_wait_queue(sk_sleep(sk), &wait);
- while ((l2cap_pi(sk)->unacked_frames > 0 && l2cap_pi(sk)->conn)) {
+ while ((chan->unacked_frames > 0 && chan->conn)) {
set_current_state(TASK_INTERRUPTIBLE);
if (!timeo)
@@ -932,68 +1022,69 @@
static void l2cap_monitor_timeout(unsigned long arg)
{
- struct sock *sk = (void *) arg;
+ struct l2cap_chan *chan = (void *) arg;
+ struct sock *sk = chan->sk;
- BT_DBG("sk %p", sk);
+ BT_DBG("chan %p", chan);
bh_lock_sock(sk);
- if (l2cap_pi(sk)->retry_count >= l2cap_pi(sk)->remote_max_tx) {
- l2cap_send_disconn_req(l2cap_pi(sk)->conn, sk, ECONNABORTED);
+ if (chan->retry_count >= chan->remote_max_tx) {
+ l2cap_send_disconn_req(chan->conn, chan, ECONNABORTED);
bh_unlock_sock(sk);
return;
}
- l2cap_pi(sk)->retry_count++;
+ chan->retry_count++;
__mod_monitor_timer();
- l2cap_send_rr_or_rnr(l2cap_pi(sk), L2CAP_CTRL_POLL);
+ l2cap_send_rr_or_rnr(chan, L2CAP_CTRL_POLL);
bh_unlock_sock(sk);
}
static void l2cap_retrans_timeout(unsigned long arg)
{
- struct sock *sk = (void *) arg;
+ struct l2cap_chan *chan = (void *) arg;
+ struct sock *sk = chan->sk;
- BT_DBG("sk %p", sk);
+ BT_DBG("chan %p", chan);
bh_lock_sock(sk);
- l2cap_pi(sk)->retry_count = 1;
+ chan->retry_count = 1;
__mod_monitor_timer();
- l2cap_pi(sk)->conn_state |= L2CAP_CONN_WAIT_F;
+ chan->conn_state |= L2CAP_CONN_WAIT_F;
- l2cap_send_rr_or_rnr(l2cap_pi(sk), L2CAP_CTRL_POLL);
+ l2cap_send_rr_or_rnr(chan, L2CAP_CTRL_POLL);
bh_unlock_sock(sk);
}
-static void l2cap_drop_acked_frames(struct sock *sk)
+static void l2cap_drop_acked_frames(struct l2cap_chan *chan)
{
struct sk_buff *skb;
- while ((skb = skb_peek(TX_QUEUE(sk))) &&
- l2cap_pi(sk)->unacked_frames) {
- if (bt_cb(skb)->tx_seq == l2cap_pi(sk)->expected_ack_seq)
+ while ((skb = skb_peek(&chan->tx_q)) &&
+ chan->unacked_frames) {
+ if (bt_cb(skb)->tx_seq == chan->expected_ack_seq)
break;
- skb = skb_dequeue(TX_QUEUE(sk));
+ skb = skb_dequeue(&chan->tx_q);
kfree_skb(skb);
- l2cap_pi(sk)->unacked_frames--;
+ chan->unacked_frames--;
}
- if (!l2cap_pi(sk)->unacked_frames)
- del_timer(&l2cap_pi(sk)->retrans_timer);
+ if (!chan->unacked_frames)
+ del_timer(&chan->retrans_timer);
}
-void l2cap_do_send(struct sock *sk, struct sk_buff *skb)
+void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
- struct hci_conn *hcon = pi->conn->hcon;
+ struct hci_conn *hcon = chan->conn->hcon;
u16 flags;
- BT_DBG("sk %p, skb %p len %d", sk, skb, skb->len);
+ BT_DBG("chan %p, skb %p len %d", chan, skb, skb->len);
- if (!pi->flushable && lmp_no_flush_capable(hcon->hdev))
+ if (!chan->flushable && lmp_no_flush_capable(hcon->hdev))
flags = ACL_START_NO_FLUSH;
else
flags = ACL_START;
@@ -1001,35 +1092,33 @@
hci_send_acl(hcon, skb, flags);
}
-void l2cap_streaming_send(struct sock *sk)
+void l2cap_streaming_send(struct l2cap_chan *chan)
{
struct sk_buff *skb;
- struct l2cap_pinfo *pi = l2cap_pi(sk);
u16 control, fcs;
- while ((skb = skb_dequeue(TX_QUEUE(sk)))) {
+ while ((skb = skb_dequeue(&chan->tx_q))) {
control = get_unaligned_le16(skb->data + L2CAP_HDR_SIZE);
- control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
+ control |= chan->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
put_unaligned_le16(control, skb->data + L2CAP_HDR_SIZE);
- if (pi->fcs == L2CAP_FCS_CRC16) {
+ if (chan->fcs == L2CAP_FCS_CRC16) {
fcs = crc16(0, (u8 *)skb->data, skb->len - 2);
put_unaligned_le16(fcs, skb->data + skb->len - 2);
}
- l2cap_do_send(sk, skb);
+ l2cap_do_send(chan, skb);
- pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
+ chan->next_tx_seq = (chan->next_tx_seq + 1) % 64;
}
}
-static void l2cap_retransmit_one_frame(struct sock *sk, u8 tx_seq)
+static void l2cap_retransmit_one_frame(struct l2cap_chan *chan, u8 tx_seq)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct sk_buff *skb, *tx_skb;
u16 control, fcs;
- skb = skb_peek(TX_QUEUE(sk));
+ skb = skb_peek(&chan->tx_q);
if (!skb)
return;
@@ -1037,54 +1126,55 @@
if (bt_cb(skb)->tx_seq == tx_seq)
break;
- if (skb_queue_is_last(TX_QUEUE(sk), skb))
+ if (skb_queue_is_last(&chan->tx_q, skb))
return;
- } while ((skb = skb_queue_next(TX_QUEUE(sk), skb)));
+ } while ((skb = skb_queue_next(&chan->tx_q, skb)));
- if (pi->remote_max_tx &&
- bt_cb(skb)->retries == pi->remote_max_tx) {
- l2cap_send_disconn_req(pi->conn, sk, ECONNABORTED);
+ if (chan->remote_max_tx &&
+ bt_cb(skb)->retries == chan->remote_max_tx) {
+ l2cap_send_disconn_req(chan->conn, chan, ECONNABORTED);
return;
}
tx_skb = skb_clone(skb, GFP_ATOMIC);
bt_cb(skb)->retries++;
control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+ control &= L2CAP_CTRL_SAR;
- if (pi->conn_state & L2CAP_CONN_SEND_FBIT) {
+ if (chan->conn_state & L2CAP_CONN_SEND_FBIT) {
control |= L2CAP_CTRL_FINAL;
- pi->conn_state &= ~L2CAP_CONN_SEND_FBIT;
+ chan->conn_state &= ~L2CAP_CONN_SEND_FBIT;
}
- control |= (pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT)
+ control |= (chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT)
| (tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
- if (pi->fcs == L2CAP_FCS_CRC16) {
+ if (chan->fcs == L2CAP_FCS_CRC16) {
fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
}
- l2cap_do_send(sk, tx_skb);
+ l2cap_do_send(chan, tx_skb);
}
-int l2cap_ertm_send(struct sock *sk)
+int l2cap_ertm_send(struct l2cap_chan *chan)
{
struct sk_buff *skb, *tx_skb;
- struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct sock *sk = chan->sk;
u16 control, fcs;
int nsent = 0;
if (sk->sk_state != BT_CONNECTED)
return -ENOTCONN;
- while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk))) {
+ while ((skb = chan->tx_send_head) && (!l2cap_tx_window_full(chan))) {
- if (pi->remote_max_tx &&
- bt_cb(skb)->retries == pi->remote_max_tx) {
- l2cap_send_disconn_req(pi->conn, sk, ECONNABORTED);
+ if (chan->remote_max_tx &&
+ bt_cb(skb)->retries == chan->remote_max_tx) {
+ l2cap_send_disconn_req(chan->conn, chan, ECONNABORTED);
break;
}
@@ -1095,36 +1185,36 @@
control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
control &= L2CAP_CTRL_SAR;
- if (pi->conn_state & L2CAP_CONN_SEND_FBIT) {
+ if (chan->conn_state & L2CAP_CONN_SEND_FBIT) {
control |= L2CAP_CTRL_FINAL;
- pi->conn_state &= ~L2CAP_CONN_SEND_FBIT;
+ chan->conn_state &= ~L2CAP_CONN_SEND_FBIT;
}
- control |= (pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT)
- | (pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
+ control |= (chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT)
+ | (chan->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
- if (pi->fcs == L2CAP_FCS_CRC16) {
+ if (chan->fcs == L2CAP_FCS_CRC16) {
fcs = crc16(0, (u8 *)skb->data, tx_skb->len - 2);
put_unaligned_le16(fcs, skb->data + tx_skb->len - 2);
}
- l2cap_do_send(sk, tx_skb);
+ l2cap_do_send(chan, tx_skb);
__mod_retrans_timer();
- bt_cb(skb)->tx_seq = pi->next_tx_seq;
- pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
+ bt_cb(skb)->tx_seq = chan->next_tx_seq;
+ chan->next_tx_seq = (chan->next_tx_seq + 1) % 64;
if (bt_cb(skb)->retries == 1)
- pi->unacked_frames++;
+ chan->unacked_frames++;
- pi->frames_sent++;
+ chan->frames_sent++;
- if (skb_queue_is_last(TX_QUEUE(sk), skb))
- sk->sk_send_head = NULL;
+ if (skb_queue_is_last(&chan->tx_q, skb))
+ chan->tx_send_head = NULL;
else
- sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
+ chan->tx_send_head = skb_queue_next(&chan->tx_q, skb);
nsent++;
}
@@ -1132,41 +1222,39 @@
return nsent;
}
-static int l2cap_retransmit_frames(struct sock *sk)
+static int l2cap_retransmit_frames(struct l2cap_chan *chan)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
int ret;
- if (!skb_queue_empty(TX_QUEUE(sk)))
- sk->sk_send_head = TX_QUEUE(sk)->next;
+ if (!skb_queue_empty(&chan->tx_q))
+ chan->tx_send_head = chan->tx_q.next;
- pi->next_tx_seq = pi->expected_ack_seq;
- ret = l2cap_ertm_send(sk);
+ chan->next_tx_seq = chan->expected_ack_seq;
+ ret = l2cap_ertm_send(chan);
return ret;
}
-static void l2cap_send_ack(struct l2cap_pinfo *pi)
+static void l2cap_send_ack(struct l2cap_chan *chan)
{
- struct sock *sk = (struct sock *)pi;
u16 control = 0;
- control |= pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ control |= chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
- if (pi->conn_state & L2CAP_CONN_LOCAL_BUSY) {
+ if (chan->conn_state & L2CAP_CONN_LOCAL_BUSY) {
control |= L2CAP_SUPER_RCV_NOT_READY;
- pi->conn_state |= L2CAP_CONN_RNR_SENT;
- l2cap_send_sframe(pi, control);
+ chan->conn_state |= L2CAP_CONN_RNR_SENT;
+ l2cap_send_sframe(chan, control);
return;
}
- if (l2cap_ertm_send(sk) > 0)
+ if (l2cap_ertm_send(chan) > 0)
return;
control |= L2CAP_SUPER_RCV_READY;
- l2cap_send_sframe(pi, control);
+ l2cap_send_sframe(chan, control);
}
-static void l2cap_send_srejtail(struct sock *sk)
+static void l2cap_send_srejtail(struct l2cap_chan *chan)
{
struct srej_list *tail;
u16 control;
@@ -1174,15 +1262,15 @@
control = L2CAP_SUPER_SELECT_REJECT;
control |= L2CAP_CTRL_FINAL;
- tail = list_entry(SREJ_LIST(sk)->prev, struct srej_list, list);
+ tail = list_entry((&chan->srej_l)->prev, struct srej_list, list);
control |= tail->tx_seq << L2CAP_CTRL_REQSEQ_SHIFT;
- l2cap_send_sframe(l2cap_pi(sk), control);
+ l2cap_send_sframe(chan, control);
}
static inline int l2cap_skbuff_fromiovec(struct sock *sk, struct msghdr *msg, int len, int count, struct sk_buff *skb)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;
struct sk_buff **frag;
int err, sent = 0;
@@ -1212,9 +1300,10 @@
return sent;
}
-struct sk_buff *l2cap_create_connless_pdu(struct sock *sk, struct msghdr *msg, size_t len)
+struct sk_buff *l2cap_create_connless_pdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sock *sk = chan->sk;
+ struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count, hlen = L2CAP_HDR_SIZE + 2;
struct l2cap_hdr *lh;
@@ -1229,9 +1318,9 @@
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
- lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
- put_unaligned_le16(l2cap_pi(sk)->psm, skb_put(skb, 2));
+ put_unaligned_le16(chan->psm, skb_put(skb, 2));
err = l2cap_skbuff_fromiovec(sk, msg, len, count, skb);
if (unlikely(err < 0)) {
@@ -1241,9 +1330,10 @@
return skb;
}
-struct sk_buff *l2cap_create_basic_pdu(struct sock *sk, struct msghdr *msg, size_t len)
+struct sk_buff *l2cap_create_basic_pdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sock *sk = chan->sk;
+ struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count, hlen = L2CAP_HDR_SIZE;
struct l2cap_hdr *lh;
@@ -1258,7 +1348,7 @@
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
- lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
err = l2cap_skbuff_fromiovec(sk, msg, len, count, skb);
@@ -1269,9 +1359,10 @@
return skb;
}
-struct sk_buff *l2cap_create_iframe_pdu(struct sock *sk, struct msghdr *msg, size_t len, u16 control, u16 sdulen)
+struct sk_buff *l2cap_create_iframe_pdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len, u16 control, u16 sdulen)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sock *sk = chan->sk;
+ struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count, hlen = L2CAP_HDR_SIZE + 2;
struct l2cap_hdr *lh;
@@ -1284,7 +1375,7 @@
if (sdulen)
hlen += 2;
- if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16)
+ if (chan->fcs == L2CAP_FCS_CRC16)
hlen += 2;
count = min_t(unsigned int, (conn->mtu - hlen), len);
@@ -1295,7 +1386,7 @@
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
- lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
put_unaligned_le16(control, skb_put(skb, 2));
if (sdulen)
@@ -1307,16 +1398,15 @@
return ERR_PTR(err);
}
- if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16)
+ if (chan->fcs == L2CAP_FCS_CRC16)
put_unaligned_le16(0, skb_put(skb, 2));
bt_cb(skb)->retries = 0;
return skb;
}
-int l2cap_sar_segment_sdu(struct sock *sk, struct msghdr *msg, size_t len)
+int l2cap_sar_segment_sdu(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct sk_buff *skb;
struct sk_buff_head sar_queue;
u16 control;
@@ -1324,26 +1414,26 @@
skb_queue_head_init(&sar_queue);
control = L2CAP_SDU_START;
- skb = l2cap_create_iframe_pdu(sk, msg, pi->remote_mps, control, len);
+ skb = l2cap_create_iframe_pdu(chan, msg, chan->remote_mps, control, len);
if (IS_ERR(skb))
return PTR_ERR(skb);
__skb_queue_tail(&sar_queue, skb);
- len -= pi->remote_mps;
- size += pi->remote_mps;
+ len -= chan->remote_mps;
+ size += chan->remote_mps;
while (len > 0) {
size_t buflen;
- if (len > pi->remote_mps) {
+ if (len > chan->remote_mps) {
control = L2CAP_SDU_CONTINUE;
- buflen = pi->remote_mps;
+ buflen = chan->remote_mps;
} else {
control = L2CAP_SDU_END;
buflen = len;
}
- skb = l2cap_create_iframe_pdu(sk, msg, buflen, control, 0);
+ skb = l2cap_create_iframe_pdu(chan, msg, buflen, control, 0);
if (IS_ERR(skb)) {
skb_queue_purge(&sar_queue);
return PTR_ERR(skb);
@@ -1353,9 +1443,9 @@
len -= buflen;
size += buflen;
}
- skb_queue_splice_tail(&sar_queue, TX_QUEUE(sk));
- if (sk->sk_send_head == NULL)
- sk->sk_send_head = sar_queue.next;
+ skb_queue_splice_tail(&sar_queue, &chan->tx_q);
+ if (chan->tx_send_head == NULL)
+ chan->tx_send_head = sar_queue.next;
return size;
}
@@ -1363,10 +1453,11 @@
static void l2cap_chan_ready(struct sock *sk)
{
struct sock *parent = bt_sk(sk)->parent;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
BT_DBG("sk %p, parent %p", sk, parent);
- l2cap_pi(sk)->conf_state = 0;
+ chan->conf_state = 0;
l2cap_sock_clear_timer(sk);
if (!parent) {
@@ -1386,14 +1477,14 @@
/* Copy frame to all raw sockets on that connection */
static void l2cap_raw_recv(struct l2cap_conn *conn, struct sk_buff *skb)
{
- struct l2cap_chan_list *l = &conn->chan_list;
struct sk_buff *nskb;
- struct sock *sk;
+ struct l2cap_chan *chan;
BT_DBG("conn %p", conn);
- read_lock(&l->lock);
- for (sk = l->head; sk; sk = l2cap_pi(sk)->next_c) {
+ read_lock(&conn->chan_lock);
+ list_for_each_entry(chan, &conn->chan_l, list) {
+ struct sock *sk = chan->sk;
if (sk->sk_type != SOCK_RAW)
continue;
@@ -1407,7 +1498,7 @@
if (sock_queue_rcv_skb(sk, nskb))
kfree_skb(nskb);
}
- read_unlock(&l->lock);
+ read_unlock(&conn->chan_lock);
}
/* ---- L2CAP signalling commands ---- */
@@ -1539,32 +1630,35 @@
static void l2cap_ack_timeout(unsigned long arg)
{
- struct sock *sk = (void *) arg;
+ struct l2cap_chan *chan = (void *) arg;
- bh_lock_sock(sk);
- l2cap_send_ack(l2cap_pi(sk));
- bh_unlock_sock(sk);
+ bh_lock_sock(chan->sk);
+ l2cap_send_ack(chan);
+ bh_unlock_sock(chan->sk);
}
-static inline void l2cap_ertm_init(struct sock *sk)
+static inline void l2cap_ertm_init(struct l2cap_chan *chan)
{
- l2cap_pi(sk)->expected_ack_seq = 0;
- l2cap_pi(sk)->unacked_frames = 0;
- l2cap_pi(sk)->buffer_seq = 0;
- l2cap_pi(sk)->num_acked = 0;
- l2cap_pi(sk)->frames_sent = 0;
+ struct sock *sk = chan->sk;
- setup_timer(&l2cap_pi(sk)->retrans_timer,
- l2cap_retrans_timeout, (unsigned long) sk);
- setup_timer(&l2cap_pi(sk)->monitor_timer,
- l2cap_monitor_timeout, (unsigned long) sk);
- setup_timer(&l2cap_pi(sk)->ack_timer,
- l2cap_ack_timeout, (unsigned long) sk);
+ chan->expected_ack_seq = 0;
+ chan->unacked_frames = 0;
+ chan->buffer_seq = 0;
+ chan->num_acked = 0;
+ chan->frames_sent = 0;
- __skb_queue_head_init(SREJ_QUEUE(sk));
- __skb_queue_head_init(BUSY_QUEUE(sk));
+ setup_timer(&chan->retrans_timer, l2cap_retrans_timeout,
+ (unsigned long) chan);
+ setup_timer(&chan->monitor_timer, l2cap_monitor_timeout,
+ (unsigned long) chan);
+ setup_timer(&chan->ack_timer, l2cap_ack_timeout, (unsigned long) chan);
- INIT_WORK(&l2cap_pi(sk)->busy_work, l2cap_busy_work);
+ skb_queue_head_init(&chan->srej_q);
+ skb_queue_head_init(&chan->busy_q);
+
+ INIT_LIST_HEAD(&chan->srej_l);
+
+ INIT_WORK(&chan->busy_work, l2cap_busy_work);
sk->sk_backlog_rcv = l2cap_ertm_data_rcv;
}
@@ -1582,38 +1676,37 @@
}
}
-int l2cap_build_conf_req(struct sock *sk, void *data)
+static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct l2cap_conf_req *req = data;
- struct l2cap_conf_rfc rfc = { .mode = pi->mode };
+ struct l2cap_conf_rfc rfc = { .mode = chan->mode };
void *ptr = req->data;
- BT_DBG("sk %p", sk);
+ BT_DBG("chan %p", chan);
- if (pi->num_conf_req || pi->num_conf_rsp)
+ if (chan->num_conf_req || chan->num_conf_rsp)
goto done;
- switch (pi->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_STREAMING:
case L2CAP_MODE_ERTM:
- if (pi->conf_state & L2CAP_CONF_STATE2_DEVICE)
+ if (chan->conf_state & L2CAP_CONF_STATE2_DEVICE)
break;
/* fall through */
default:
- pi->mode = l2cap_select_mode(rfc.mode, pi->conn->feat_mask);
+ chan->mode = l2cap_select_mode(rfc.mode, chan->conn->feat_mask);
break;
}
done:
- if (pi->imtu != L2CAP_DEFAULT_MTU)
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
+ if (chan->imtu != L2CAP_DEFAULT_MTU)
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->imtu);
- switch (pi->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_BASIC:
- if (!(pi->conn->feat_mask & L2CAP_FEAT_ERTM) &&
- !(pi->conn->feat_mask & L2CAP_FEAT_STREAMING))
+ if (!(chan->conn->feat_mask & L2CAP_FEAT_ERTM) &&
+ !(chan->conn->feat_mask & L2CAP_FEAT_STREAMING))
break;
rfc.mode = L2CAP_MODE_BASIC;
@@ -1629,24 +1722,24 @@
case L2CAP_MODE_ERTM:
rfc.mode = L2CAP_MODE_ERTM;
- rfc.txwin_size = pi->tx_win;
- rfc.max_transmit = pi->max_tx;
+ rfc.txwin_size = chan->tx_win;
+ rfc.max_transmit = chan->max_tx;
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
- if (L2CAP_DEFAULT_MAX_PDU_SIZE > pi->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
+ if (L2CAP_DEFAULT_MAX_PDU_SIZE > chan->conn->mtu - 10)
+ rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
- if (!(pi->conn->feat_mask & L2CAP_FEAT_FCS))
+ if (!(chan->conn->feat_mask & L2CAP_FEAT_FCS))
break;
- if (pi->fcs == L2CAP_FCS_NONE ||
- pi->conf_state & L2CAP_CONF_NO_FCS_RECV) {
- pi->fcs = L2CAP_FCS_NONE;
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, pi->fcs);
+ if (chan->fcs == L2CAP_FCS_NONE ||
+ chan->conf_state & L2CAP_CONF_NO_FCS_RECV) {
+ chan->fcs = L2CAP_FCS_NONE;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, chan->fcs);
}
break;
@@ -1657,43 +1750,42 @@
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
- if (L2CAP_DEFAULT_MAX_PDU_SIZE > pi->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
+ if (L2CAP_DEFAULT_MAX_PDU_SIZE > chan->conn->mtu - 10)
+ rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
- if (!(pi->conn->feat_mask & L2CAP_FEAT_FCS))
+ if (!(chan->conn->feat_mask & L2CAP_FEAT_FCS))
break;
- if (pi->fcs == L2CAP_FCS_NONE ||
- pi->conf_state & L2CAP_CONF_NO_FCS_RECV) {
- pi->fcs = L2CAP_FCS_NONE;
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, pi->fcs);
+ if (chan->fcs == L2CAP_FCS_NONE ||
+ chan->conf_state & L2CAP_CONF_NO_FCS_RECV) {
+ chan->fcs = L2CAP_FCS_NONE;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, chan->fcs);
}
break;
}
- req->dcid = cpu_to_le16(pi->dcid);
+ req->dcid = cpu_to_le16(chan->dcid);
req->flags = cpu_to_le16(0);
return ptr - data;
}
-static int l2cap_parse_conf_req(struct sock *sk, void *data)
+static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct l2cap_conf_rsp *rsp = data;
void *ptr = rsp->data;
- void *req = pi->conf_req;
- int len = pi->conf_len;
+ void *req = chan->conf_req;
+ int len = chan->conf_len;
int type, hint, olen;
unsigned long val;
struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
u16 mtu = L2CAP_DEFAULT_MTU;
u16 result = L2CAP_CONF_SUCCESS;
- BT_DBG("sk %p", sk);
+ BT_DBG("chan %p", chan);
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
@@ -1707,7 +1799,7 @@
break;
case L2CAP_CONF_FLUSH_TO:
- pi->flush_to = val;
+ chan->flush_to = val;
break;
case L2CAP_CONF_QOS:
@@ -1720,7 +1812,7 @@
case L2CAP_CONF_FCS:
if (val == L2CAP_FCS_NONE)
- pi->conf_state |= L2CAP_CONF_NO_FCS_RECV;
+ chan->conf_state |= L2CAP_CONF_NO_FCS_RECV;
break;
@@ -1734,30 +1826,30 @@
}
}
- if (pi->num_conf_rsp || pi->num_conf_req > 1)
+ if (chan->num_conf_rsp || chan->num_conf_req > 1)
goto done;
- switch (pi->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_STREAMING:
case L2CAP_MODE_ERTM:
- if (!(pi->conf_state & L2CAP_CONF_STATE2_DEVICE)) {
- pi->mode = l2cap_select_mode(rfc.mode,
- pi->conn->feat_mask);
+ if (!(chan->conf_state & L2CAP_CONF_STATE2_DEVICE)) {
+ chan->mode = l2cap_select_mode(rfc.mode,
+ chan->conn->feat_mask);
break;
}
- if (pi->mode != rfc.mode)
+ if (chan->mode != rfc.mode)
return -ECONNREFUSED;
break;
}
done:
- if (pi->mode != rfc.mode) {
+ if (chan->mode != rfc.mode) {
result = L2CAP_CONF_UNACCEPT;
- rfc.mode = pi->mode;
+ rfc.mode = chan->mode;
- if (pi->num_conf_rsp == 1)
+ if (chan->num_conf_rsp == 1)
return -ECONNREFUSED;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
@@ -1772,32 +1864,32 @@
if (mtu < L2CAP_DEFAULT_MIN_MTU)
result = L2CAP_CONF_UNACCEPT;
else {
- pi->omtu = mtu;
- pi->conf_state |= L2CAP_CONF_MTU_DONE;
+ chan->omtu = mtu;
+ chan->conf_state |= L2CAP_CONF_MTU_DONE;
}
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->omtu);
switch (rfc.mode) {
case L2CAP_MODE_BASIC:
- pi->fcs = L2CAP_FCS_NONE;
- pi->conf_state |= L2CAP_CONF_MODE_DONE;
+ chan->fcs = L2CAP_FCS_NONE;
+ chan->conf_state |= L2CAP_CONF_MODE_DONE;
break;
case L2CAP_MODE_ERTM:
- pi->remote_tx_win = rfc.txwin_size;
- pi->remote_max_tx = rfc.max_transmit;
+ chan->remote_tx_win = rfc.txwin_size;
+ chan->remote_max_tx = rfc.max_transmit;
- if (le16_to_cpu(rfc.max_pdu_size) > pi->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
+ if (le16_to_cpu(rfc.max_pdu_size) > chan->conn->mtu - 10)
+ rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
- pi->remote_mps = le16_to_cpu(rfc.max_pdu_size);
+ chan->remote_mps = le16_to_cpu(rfc.max_pdu_size);
rfc.retrans_timeout =
le16_to_cpu(L2CAP_DEFAULT_RETRANS_TO);
rfc.monitor_timeout =
le16_to_cpu(L2CAP_DEFAULT_MONITOR_TO);
- pi->conf_state |= L2CAP_CONF_MODE_DONE;
+ chan->conf_state |= L2CAP_CONF_MODE_DONE;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
sizeof(rfc), (unsigned long) &rfc);
@@ -1805,12 +1897,12 @@
break;
case L2CAP_MODE_STREAMING:
- if (le16_to_cpu(rfc.max_pdu_size) > pi->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
+ if (le16_to_cpu(rfc.max_pdu_size) > chan->conn->mtu - 10)
+ rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
- pi->remote_mps = le16_to_cpu(rfc.max_pdu_size);
+ chan->remote_mps = le16_to_cpu(rfc.max_pdu_size);
- pi->conf_state |= L2CAP_CONF_MODE_DONE;
+ chan->conf_state |= L2CAP_CONF_MODE_DONE;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
sizeof(rfc), (unsigned long) &rfc);
@@ -1821,29 +1913,28 @@
result = L2CAP_CONF_UNACCEPT;
memset(&rfc, 0, sizeof(rfc));
- rfc.mode = pi->mode;
+ rfc.mode = chan->mode;
}
if (result == L2CAP_CONF_SUCCESS)
- pi->conf_state |= L2CAP_CONF_OUTPUT_DONE;
+ chan->conf_state |= L2CAP_CONF_OUTPUT_DONE;
}
- rsp->scid = cpu_to_le16(pi->dcid);
+ rsp->scid = cpu_to_le16(chan->dcid);
rsp->result = cpu_to_le16(result);
rsp->flags = cpu_to_le16(0x0000);
return ptr - data;
}
-static int l2cap_parse_conf_rsp(struct sock *sk, void *rsp, int len, void *data, u16 *result)
+static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len, void *data, u16 *result)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct l2cap_conf_req *req = data;
void *ptr = req->data;
int type, olen;
unsigned long val;
struct l2cap_conf_rfc rfc;
- BT_DBG("sk %p, rsp %p, len %d, req %p", sk, rsp, len, data);
+ BT_DBG("chan %p, rsp %p, len %d, req %p", chan, rsp, len, data);
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
@@ -1852,27 +1943,27 @@
case L2CAP_CONF_MTU:
if (val < L2CAP_DEFAULT_MIN_MTU) {
*result = L2CAP_CONF_UNACCEPT;
- pi->imtu = L2CAP_DEFAULT_MIN_MTU;
+ chan->imtu = L2CAP_DEFAULT_MIN_MTU;
} else
- pi->imtu = val;
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
+ chan->imtu = val;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->imtu);
break;
case L2CAP_CONF_FLUSH_TO:
- pi->flush_to = val;
+ chan->flush_to = val;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_FLUSH_TO,
- 2, pi->flush_to);
+ 2, chan->flush_to);
break;
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *)val, olen);
- if ((pi->conf_state & L2CAP_CONF_STATE2_DEVICE) &&
- rfc.mode != pi->mode)
+ if ((chan->conf_state & L2CAP_CONF_STATE2_DEVICE) &&
+ rfc.mode != chan->mode)
return -ECONNREFUSED;
- pi->fcs = 0;
+ chan->fcs = 0;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
sizeof(rfc), (unsigned long) &rfc);
@@ -1880,53 +1971,74 @@
}
}
- if (pi->mode == L2CAP_MODE_BASIC && pi->mode != rfc.mode)
+ if (chan->mode == L2CAP_MODE_BASIC && chan->mode != rfc.mode)
return -ECONNREFUSED;
- pi->mode = rfc.mode;
+ chan->mode = rfc.mode;
if (*result == L2CAP_CONF_SUCCESS) {
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
- pi->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
- pi->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
- pi->mps = le16_to_cpu(rfc.max_pdu_size);
+ chan->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
+ chan->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
+ chan->mps = le16_to_cpu(rfc.max_pdu_size);
break;
case L2CAP_MODE_STREAMING:
- pi->mps = le16_to_cpu(rfc.max_pdu_size);
+ chan->mps = le16_to_cpu(rfc.max_pdu_size);
}
}
- req->dcid = cpu_to_le16(pi->dcid);
+ req->dcid = cpu_to_le16(chan->dcid);
req->flags = cpu_to_le16(0x0000);
return ptr - data;
}
-static int l2cap_build_conf_rsp(struct sock *sk, void *data, u16 result, u16 flags)
+static int l2cap_build_conf_rsp(struct l2cap_chan *chan, void *data, u16 result, u16 flags)
{
struct l2cap_conf_rsp *rsp = data;
void *ptr = rsp->data;
- BT_DBG("sk %p", sk);
+ BT_DBG("chan %p", chan);
- rsp->scid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ rsp->scid = cpu_to_le16(chan->dcid);
rsp->result = cpu_to_le16(result);
rsp->flags = cpu_to_le16(flags);
return ptr - data;
}
-static void l2cap_conf_rfc_get(struct sock *sk, void *rsp, int len)
+void __l2cap_connect_rsp_defer(struct l2cap_chan *chan)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct l2cap_conn_rsp rsp;
+ struct l2cap_conn *conn = chan->conn;
+ u8 buf[128];
+
+ rsp.scid = cpu_to_le16(chan->dcid);
+ rsp.dcid = cpu_to_le16(chan->scid);
+ rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
+ l2cap_send_cmd(conn, chan->ident,
+ L2CAP_CONN_RSP, sizeof(rsp), &rsp);
+
+ if (chan->conf_state & L2CAP_CONF_REQ_SENT)
+ return;
+
+ chan->conf_state |= L2CAP_CONF_REQ_SENT;
+ l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
+ l2cap_build_conf_req(chan, buf), buf);
+ chan->num_conf_req++;
+}
+
+static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)
+{
int type, olen;
unsigned long val;
struct l2cap_conf_rfc rfc;
- BT_DBG("sk %p, rsp %p, len %d", sk, rsp, len);
+ BT_DBG("chan %p, rsp %p, len %d", chan, rsp, len);
- if ((pi->mode != L2CAP_MODE_ERTM) && (pi->mode != L2CAP_MODE_STREAMING))
+ if ((chan->mode != L2CAP_MODE_ERTM) && (chan->mode != L2CAP_MODE_STREAMING))
return;
while (len >= L2CAP_CONF_OPT_SIZE) {
@@ -1943,12 +2055,12 @@
done:
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
- pi->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
- pi->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
- pi->mps = le16_to_cpu(rfc.max_pdu_size);
+ chan->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
+ chan->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
+ chan->mps = le16_to_cpu(rfc.max_pdu_size);
break;
case L2CAP_MODE_STREAMING:
- pi->mps = le16_to_cpu(rfc.max_pdu_size);
+ chan->mps = le16_to_cpu(rfc.max_pdu_size);
}
}
@@ -1974,9 +2086,9 @@
static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
{
- struct l2cap_chan_list *list = &conn->chan_list;
struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
struct l2cap_conn_rsp rsp;
+ struct l2cap_chan *chan = NULL, *pchan;
struct sock *parent, *sk = NULL;
int result, status = L2CAP_CS_NO_INFO;
@@ -1986,12 +2098,14 @@
BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
/* Check if we have socket listening on psm */
- parent = l2cap_get_sock_by_psm(BT_LISTEN, psm, conn->src);
- if (!parent) {
+ pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, conn->src);
+ if (!pchan) {
result = L2CAP_CR_BAD_PSM;
goto sendresp;
}
+ parent = pchan->sk;
+
bh_lock_sock(parent);
/* Check if the ACL is secure enough (if not SDP) */
@@ -2014,11 +2128,19 @@
if (!sk)
goto response;
- write_lock_bh(&list->lock);
+ chan = l2cap_chan_create(sk);
+ if (!chan) {
+ l2cap_sock_kill(sk);
+ goto response;
+ }
+
+ l2cap_pi(sk)->chan = chan;
+
+ write_lock_bh(&conn->chan_lock);
/* Check if we already have channel with that dcid */
- if (__l2cap_get_chan_by_dcid(list, scid)) {
- write_unlock_bh(&list->lock);
+ if (__l2cap_get_chan_by_dcid(conn, scid)) {
+ write_unlock_bh(&conn->chan_lock);
sock_set_flag(sk, SOCK_ZAPPED);
l2cap_sock_kill(sk);
goto response;
@@ -2029,18 +2151,21 @@
l2cap_sock_init(sk, parent);
bacpy(&bt_sk(sk)->src, conn->src);
bacpy(&bt_sk(sk)->dst, conn->dst);
- l2cap_pi(sk)->psm = psm;
- l2cap_pi(sk)->dcid = scid;
+ chan->psm = psm;
+ chan->dcid = scid;
- __l2cap_chan_add(conn, sk, parent);
- dcid = l2cap_pi(sk)->scid;
+ bt_accept_enqueue(parent, sk);
+
+ __l2cap_chan_add(conn, chan);
+
+ dcid = chan->scid;
l2cap_sock_set_timer(sk, sk->sk_sndtimeo);
- l2cap_pi(sk)->ident = cmd->ident;
+ chan->ident = cmd->ident;
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE) {
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(chan)) {
if (bt_sk(sk)->defer_setup) {
sk->sk_state = BT_CONNECT2;
result = L2CAP_CR_PEND;
@@ -2062,7 +2187,7 @@
status = L2CAP_CS_NO_INFO;
}
- write_unlock_bh(&list->lock);
+ write_unlock_bh(&conn->chan_lock);
response:
bh_unlock_sock(parent);
@@ -2088,13 +2213,13 @@
L2CAP_INFO_REQ, sizeof(info), &info);
}
- if (sk && !(l2cap_pi(sk)->conf_state & L2CAP_CONF_REQ_SENT) &&
+ if (chan && !(chan->conf_state & L2CAP_CONF_REQ_SENT) &&
result == L2CAP_CR_SUCCESS) {
u8 buf[128];
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
+ chan->conf_state |= L2CAP_CONF_REQ_SENT;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
- l2cap_build_conf_req(sk, buf), buf);
- l2cap_pi(sk)->num_conf_req++;
+ l2cap_build_conf_req(chan, buf), buf);
+ chan->num_conf_req++;
}
return 0;
@@ -2104,6 +2229,7 @@
{
struct l2cap_conn_rsp *rsp = (struct l2cap_conn_rsp *) data;
u16 scid, dcid, result, status;
+ struct l2cap_chan *chan;
struct sock *sk;
u8 req[128];
@@ -2115,34 +2241,36 @@
BT_DBG("dcid 0x%4.4x scid 0x%4.4x result 0x%2.2x status 0x%2.2x", dcid, scid, result, status);
if (scid) {
- sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
- if (!sk)
+ chan = l2cap_get_chan_by_scid(conn, scid);
+ if (!chan)
return -EFAULT;
} else {
- sk = l2cap_get_chan_by_ident(&conn->chan_list, cmd->ident);
- if (!sk)
+ chan = l2cap_get_chan_by_ident(conn, cmd->ident);
+ if (!chan)
return -EFAULT;
}
+ sk = chan->sk;
+
switch (result) {
case L2CAP_CR_SUCCESS:
sk->sk_state = BT_CONFIG;
- l2cap_pi(sk)->ident = 0;
- l2cap_pi(sk)->dcid = dcid;
- l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_CONNECT_PEND;
+ chan->ident = 0;
+ chan->dcid = dcid;
+ chan->conf_state &= ~L2CAP_CONF_CONNECT_PEND;
- if (l2cap_pi(sk)->conf_state & L2CAP_CONF_REQ_SENT)
+ if (chan->conf_state & L2CAP_CONF_REQ_SENT)
break;
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
+ chan->conf_state |= L2CAP_CONF_REQ_SENT;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
- l2cap_build_conf_req(sk, req), req);
- l2cap_pi(sk)->num_conf_req++;
+ l2cap_build_conf_req(chan, req), req);
+ chan->num_conf_req++;
break;
case L2CAP_CR_PEND:
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
+ chan->conf_state |= L2CAP_CONF_CONNECT_PEND;
break;
default:
@@ -2154,7 +2282,7 @@
break;
}
- l2cap_chan_del(sk, ECONNREFUSED);
+ l2cap_chan_del(chan, ECONNREFUSED);
break;
}
@@ -2162,15 +2290,17 @@
return 0;
}
-static inline void set_default_fcs(struct l2cap_pinfo *pi)
+static inline void set_default_fcs(struct l2cap_chan *chan)
{
+ struct l2cap_pinfo *pi = l2cap_pi(chan->sk);
+
/* FCS is enabled only in ERTM or streaming mode, if one or both
* sides request it.
*/
- if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING)
- pi->fcs = L2CAP_FCS_NONE;
- else if (!(pi->conf_state & L2CAP_CONF_NO_FCS_RECV))
- pi->fcs = L2CAP_FCS_CRC16;
+ if (chan->mode != L2CAP_MODE_ERTM && chan->mode != L2CAP_MODE_STREAMING)
+ chan->fcs = L2CAP_FCS_NONE;
+ else if (!(pi->chan->conf_state & L2CAP_CONF_NO_FCS_RECV))
+ chan->fcs = L2CAP_FCS_CRC16;
}
static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
@@ -2178,6 +2308,7 @@
struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
u16 dcid, flags;
u8 rsp[64];
+ struct l2cap_chan *chan;
struct sock *sk;
int len;
@@ -2186,10 +2317,12 @@
BT_DBG("dcid 0x%4.4x flags 0x%2.2x", dcid, flags);
- sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid);
- if (!sk)
+ chan = l2cap_get_chan_by_scid(conn, dcid);
+ if (!chan)
return -ENOENT;
+ sk = chan->sk;
+
if (sk->sk_state != BT_CONFIG) {
struct l2cap_cmd_rej rej;
@@ -2201,62 +2334,62 @@
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
- if (l2cap_pi(sk)->conf_len + len > sizeof(l2cap_pi(sk)->conf_req)) {
+ if (chan->conf_len + len > sizeof(chan->conf_req)) {
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP,
- l2cap_build_conf_rsp(sk, rsp,
+ l2cap_build_conf_rsp(chan, rsp,
L2CAP_CONF_REJECT, flags), rsp);
goto unlock;
}
/* Store config. */
- memcpy(l2cap_pi(sk)->conf_req + l2cap_pi(sk)->conf_len, req->data, len);
- l2cap_pi(sk)->conf_len += len;
+ memcpy(chan->conf_req + chan->conf_len, req->data, len);
+ chan->conf_len += len;
if (flags & 0x0001) {
/* Incomplete config. Send empty response. */
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP,
- l2cap_build_conf_rsp(sk, rsp,
+ l2cap_build_conf_rsp(chan, rsp,
L2CAP_CONF_SUCCESS, 0x0001), rsp);
goto unlock;
}
/* Complete config. */
- len = l2cap_parse_conf_req(sk, rsp);
+ len = l2cap_parse_conf_req(chan, rsp);
if (len < 0) {
- l2cap_send_disconn_req(conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto unlock;
}
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
- l2cap_pi(sk)->num_conf_rsp++;
+ chan->num_conf_rsp++;
/* Reset config buffer. */
- l2cap_pi(sk)->conf_len = 0;
+ chan->conf_len = 0;
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE))
+ if (!(chan->conf_state & L2CAP_CONF_OUTPUT_DONE))
goto unlock;
- if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
- set_default_fcs(l2cap_pi(sk));
+ if (chan->conf_state & L2CAP_CONF_INPUT_DONE) {
+ set_default_fcs(chan);
sk->sk_state = BT_CONNECTED;
- l2cap_pi(sk)->next_tx_seq = 0;
- l2cap_pi(sk)->expected_tx_seq = 0;
- __skb_queue_head_init(TX_QUEUE(sk));
- if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM)
- l2cap_ertm_init(sk);
+ chan->next_tx_seq = 0;
+ chan->expected_tx_seq = 0;
+ skb_queue_head_init(&chan->tx_q);
+ if (chan->mode == L2CAP_MODE_ERTM)
+ l2cap_ertm_init(chan);
l2cap_chan_ready(sk);
goto unlock;
}
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_REQ_SENT)) {
+ if (!(chan->conf_state & L2CAP_CONF_REQ_SENT)) {
u8 buf[64];
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
+ chan->conf_state |= L2CAP_CONF_REQ_SENT;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
- l2cap_build_conf_req(sk, buf), buf);
- l2cap_pi(sk)->num_conf_req++;
+ l2cap_build_conf_req(chan, buf), buf);
+ chan->num_conf_req++;
}
unlock:
@@ -2268,6 +2401,7 @@
{
struct l2cap_conf_rsp *rsp = (struct l2cap_conf_rsp *)data;
u16 scid, flags, result;
+ struct l2cap_chan *chan;
struct sock *sk;
int len = cmd->len - sizeof(*rsp);
@@ -2278,36 +2412,38 @@
BT_DBG("scid 0x%4.4x flags 0x%2.2x result 0x%2.2x",
scid, flags, result);
- sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
- if (!sk)
+ chan = l2cap_get_chan_by_scid(conn, scid);
+ if (!chan)
return 0;
+ sk = chan->sk;
+
switch (result) {
case L2CAP_CONF_SUCCESS:
- l2cap_conf_rfc_get(sk, rsp->data, len);
+ l2cap_conf_rfc_get(chan, rsp->data, len);
break;
case L2CAP_CONF_UNACCEPT:
- if (l2cap_pi(sk)->num_conf_rsp <= L2CAP_CONF_MAX_CONF_RSP) {
+ if (chan->num_conf_rsp <= L2CAP_CONF_MAX_CONF_RSP) {
char req[64];
if (len > sizeof(req) - sizeof(struct l2cap_conf_req)) {
- l2cap_send_disconn_req(conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
/* throw out any old stored conf requests */
result = L2CAP_CONF_SUCCESS;
- len = l2cap_parse_conf_rsp(sk, rsp->data,
- len, req, &result);
+ len = l2cap_parse_conf_rsp(chan, rsp->data, len,
+ req, &result);
if (len < 0) {
- l2cap_send_disconn_req(conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
l2cap_send_cmd(conn, l2cap_get_ident(conn),
L2CAP_CONF_REQ, len, req);
- l2cap_pi(sk)->num_conf_req++;
+ chan->num_conf_req++;
if (result != L2CAP_CONF_SUCCESS)
goto done;
break;
@@ -2316,24 +2452,24 @@
default:
sk->sk_err = ECONNRESET;
l2cap_sock_set_timer(sk, HZ * 5);
- l2cap_send_disconn_req(conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
if (flags & 0x01)
goto done;
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
+ chan->conf_state |= L2CAP_CONF_INPUT_DONE;
- if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
- set_default_fcs(l2cap_pi(sk));
+ if (chan->conf_state & L2CAP_CONF_OUTPUT_DONE) {
+ set_default_fcs(chan);
sk->sk_state = BT_CONNECTED;
- l2cap_pi(sk)->next_tx_seq = 0;
- l2cap_pi(sk)->expected_tx_seq = 0;
- __skb_queue_head_init(TX_QUEUE(sk));
- if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM)
- l2cap_ertm_init(sk);
+ chan->next_tx_seq = 0;
+ chan->expected_tx_seq = 0;
+ skb_queue_head_init(&chan->tx_q);
+ if (chan->mode == L2CAP_MODE_ERTM)
+ l2cap_ertm_init(chan);
l2cap_chan_ready(sk);
}
@@ -2348,6 +2484,7 @@
struct l2cap_disconn_req *req = (struct l2cap_disconn_req *) data;
struct l2cap_disconn_rsp rsp;
u16 dcid, scid;
+ struct l2cap_chan *chan;
struct sock *sk;
scid = __le16_to_cpu(req->scid);
@@ -2355,12 +2492,14 @@
BT_DBG("scid 0x%4.4x dcid 0x%4.4x", scid, dcid);
- sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid);
- if (!sk)
+ chan = l2cap_get_chan_by_scid(conn, dcid);
+ if (!chan)
return 0;
- rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
- rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ sk = chan->sk;
+
+ rsp.dcid = cpu_to_le16(chan->scid);
+ rsp.scid = cpu_to_le16(chan->dcid);
l2cap_send_cmd(conn, cmd->ident, L2CAP_DISCONN_RSP, sizeof(rsp), &rsp);
sk->sk_shutdown = SHUTDOWN_MASK;
@@ -2374,7 +2513,7 @@
return 0;
}
- l2cap_chan_del(sk, ECONNRESET);
+ l2cap_chan_del(chan, ECONNRESET);
bh_unlock_sock(sk);
l2cap_sock_kill(sk);
@@ -2385,6 +2524,7 @@
{
struct l2cap_disconn_rsp *rsp = (struct l2cap_disconn_rsp *) data;
u16 dcid, scid;
+ struct l2cap_chan *chan;
struct sock *sk;
scid = __le16_to_cpu(rsp->scid);
@@ -2392,10 +2532,12 @@
BT_DBG("dcid 0x%4.4x scid 0x%4.4x", dcid, scid);
- sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
- if (!sk)
+ chan = l2cap_get_chan_by_scid(conn, scid);
+ if (!chan)
return 0;
+ sk = chan->sk;
+
/* don't delete l2cap channel if sk is owned by user */
if (sock_owned_by_user(sk)) {
sk->sk_state = BT_DISCONN;
@@ -2405,7 +2547,7 @@
return 0;
}
- l2cap_chan_del(sk, 0);
+ l2cap_chan_del(chan, 0);
bh_unlock_sock(sk);
l2cap_sock_kill(sk);
@@ -2462,6 +2604,11 @@
BT_DBG("type 0x%4.4x result 0x%2.2x", type, result);
+ /* L2CAP Info req/rsp are unbound to channels, add extra checks */
+ if (cmd->ident != conn->info_ident ||
+ conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)
+ return 0;
+
del_timer(&conn->info_timer);
if (result != L2CAP_IR_SUCCESS) {
@@ -2672,7 +2819,8 @@
if (err) {
struct l2cap_cmd_rej rej;
- BT_DBG("error %d", err);
+
+ BT_ERR("Wrong link type (%d)", err);
/* FIXME: Map err to a valid reason */
rej.reason = cpu_to_le16(0);
@@ -2686,12 +2834,12 @@
kfree_skb(skb);
}
-static int l2cap_check_fcs(struct l2cap_pinfo *pi, struct sk_buff *skb)
+static int l2cap_check_fcs(struct l2cap_chan *chan, struct sk_buff *skb)
{
u16 our_fcs, rcv_fcs;
int hdr_size = L2CAP_HDR_SIZE + 2;
- if (pi->fcs == L2CAP_FCS_CRC16) {
+ if (chan->fcs == L2CAP_FCS_CRC16) {
skb_trim(skb, skb->len - 2);
rcv_fcs = get_unaligned_le16(skb->data + skb->len);
our_fcs = crc16(0, skb->data - hdr_size, skb->len + hdr_size);
@@ -2702,49 +2850,47 @@
return 0;
}
-static inline void l2cap_send_i_or_rr_or_rnr(struct sock *sk)
+static inline void l2cap_send_i_or_rr_or_rnr(struct l2cap_chan *chan)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
u16 control = 0;
- pi->frames_sent = 0;
+ chan->frames_sent = 0;
- control |= pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ control |= chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
- if (pi->conn_state & L2CAP_CONN_LOCAL_BUSY) {
+ if (chan->conn_state & L2CAP_CONN_LOCAL_BUSY) {
control |= L2CAP_SUPER_RCV_NOT_READY;
- l2cap_send_sframe(pi, control);
- pi->conn_state |= L2CAP_CONN_RNR_SENT;
+ l2cap_send_sframe(chan, control);
+ chan->conn_state |= L2CAP_CONN_RNR_SENT;
}
- if (pi->conn_state & L2CAP_CONN_REMOTE_BUSY)
- l2cap_retransmit_frames(sk);
+ if (chan->conn_state & L2CAP_CONN_REMOTE_BUSY)
+ l2cap_retransmit_frames(chan);
- l2cap_ertm_send(sk);
+ l2cap_ertm_send(chan);
- if (!(pi->conn_state & L2CAP_CONN_LOCAL_BUSY) &&
- pi->frames_sent == 0) {
+ if (!(chan->conn_state & L2CAP_CONN_LOCAL_BUSY) &&
+ chan->frames_sent == 0) {
control |= L2CAP_SUPER_RCV_READY;
- l2cap_send_sframe(pi, control);
+ l2cap_send_sframe(chan, control);
}
}
-static int l2cap_add_to_srej_queue(struct sock *sk, struct sk_buff *skb, u8 tx_seq, u8 sar)
+static int l2cap_add_to_srej_queue(struct l2cap_chan *chan, struct sk_buff *skb, u8 tx_seq, u8 sar)
{
struct sk_buff *next_skb;
- struct l2cap_pinfo *pi = l2cap_pi(sk);
int tx_seq_offset, next_tx_seq_offset;
bt_cb(skb)->tx_seq = tx_seq;
bt_cb(skb)->sar = sar;
- next_skb = skb_peek(SREJ_QUEUE(sk));
+ next_skb = skb_peek(&chan->srej_q);
if (!next_skb) {
- __skb_queue_tail(SREJ_QUEUE(sk), skb);
+ __skb_queue_tail(&chan->srej_q, skb);
return 0;
}
- tx_seq_offset = (tx_seq - pi->buffer_seq) % 64;
+ tx_seq_offset = (tx_seq - chan->buffer_seq) % 64;
if (tx_seq_offset < 0)
tx_seq_offset += 64;
@@ -2753,53 +2899,52 @@
return -EINVAL;
next_tx_seq_offset = (bt_cb(next_skb)->tx_seq -
- pi->buffer_seq) % 64;
+ chan->buffer_seq) % 64;
if (next_tx_seq_offset < 0)
next_tx_seq_offset += 64;
if (next_tx_seq_offset > tx_seq_offset) {
- __skb_queue_before(SREJ_QUEUE(sk), next_skb, skb);
+ __skb_queue_before(&chan->srej_q, next_skb, skb);
return 0;
}
- if (skb_queue_is_last(SREJ_QUEUE(sk), next_skb))
+ if (skb_queue_is_last(&chan->srej_q, next_skb))
break;
- } while ((next_skb = skb_queue_next(SREJ_QUEUE(sk), next_skb)));
+ } while ((next_skb = skb_queue_next(&chan->srej_q, next_skb)));
- __skb_queue_tail(SREJ_QUEUE(sk), skb);
+ __skb_queue_tail(&chan->srej_q, skb);
return 0;
}
-static int l2cap_ertm_reassembly_sdu(struct sock *sk, struct sk_buff *skb, u16 control)
+static int l2cap_ertm_reassembly_sdu(struct l2cap_chan *chan, struct sk_buff *skb, u16 control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct sk_buff *_skb;
int err;
switch (control & L2CAP_CTRL_SAR) {
case L2CAP_SDU_UNSEGMENTED:
- if (pi->conn_state & L2CAP_CONN_SAR_SDU)
+ if (chan->conn_state & L2CAP_CONN_SAR_SDU)
goto drop;
- err = sock_queue_rcv_skb(sk, skb);
+ err = sock_queue_rcv_skb(chan->sk, skb);
if (!err)
return err;
break;
case L2CAP_SDU_START:
- if (pi->conn_state & L2CAP_CONN_SAR_SDU)
+ if (chan->conn_state & L2CAP_CONN_SAR_SDU)
goto drop;
- pi->sdu_len = get_unaligned_le16(skb->data);
+ chan->sdu_len = get_unaligned_le16(skb->data);
- if (pi->sdu_len > pi->imtu)
+ if (chan->sdu_len > chan->imtu)
goto disconnect;
- pi->sdu = bt_skb_alloc(pi->sdu_len, GFP_ATOMIC);
- if (!pi->sdu)
+ chan->sdu = bt_skb_alloc(chan->sdu_len, GFP_ATOMIC);
+ if (!chan->sdu)
return -ENOMEM;
/* pull sdu_len bytes only after alloc, because of Local Busy
@@ -2807,63 +2952,63 @@
* only once, i.e., when alloc does not fail */
skb_pull(skb, 2);
- memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+ memcpy(skb_put(chan->sdu, skb->len), skb->data, skb->len);
- pi->conn_state |= L2CAP_CONN_SAR_SDU;
- pi->partial_sdu_len = skb->len;
+ chan->conn_state |= L2CAP_CONN_SAR_SDU;
+ chan->partial_sdu_len = skb->len;
break;
case L2CAP_SDU_CONTINUE:
- if (!(pi->conn_state & L2CAP_CONN_SAR_SDU))
+ if (!(chan->conn_state & L2CAP_CONN_SAR_SDU))
goto disconnect;
- if (!pi->sdu)
+ if (!chan->sdu)
goto disconnect;
- pi->partial_sdu_len += skb->len;
- if (pi->partial_sdu_len > pi->sdu_len)
+ chan->partial_sdu_len += skb->len;
+ if (chan->partial_sdu_len > chan->sdu_len)
goto drop;
- memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+ memcpy(skb_put(chan->sdu, skb->len), skb->data, skb->len);
break;
case L2CAP_SDU_END:
- if (!(pi->conn_state & L2CAP_CONN_SAR_SDU))
+ if (!(chan->conn_state & L2CAP_CONN_SAR_SDU))
goto disconnect;
- if (!pi->sdu)
+ if (!chan->sdu)
goto disconnect;
- if (!(pi->conn_state & L2CAP_CONN_SAR_RETRY)) {
- pi->partial_sdu_len += skb->len;
+ if (!(chan->conn_state & L2CAP_CONN_SAR_RETRY)) {
+ chan->partial_sdu_len += skb->len;
- if (pi->partial_sdu_len > pi->imtu)
+ if (chan->partial_sdu_len > chan->imtu)
goto drop;
- if (pi->partial_sdu_len != pi->sdu_len)
+ if (chan->partial_sdu_len != chan->sdu_len)
goto drop;
- memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+ memcpy(skb_put(chan->sdu, skb->len), skb->data, skb->len);
}
- _skb = skb_clone(pi->sdu, GFP_ATOMIC);
+ _skb = skb_clone(chan->sdu, GFP_ATOMIC);
if (!_skb) {
- pi->conn_state |= L2CAP_CONN_SAR_RETRY;
+ chan->conn_state |= L2CAP_CONN_SAR_RETRY;
return -ENOMEM;
}
- err = sock_queue_rcv_skb(sk, _skb);
+ err = sock_queue_rcv_skb(chan->sk, _skb);
if (err < 0) {
kfree_skb(_skb);
- pi->conn_state |= L2CAP_CONN_SAR_RETRY;
+ chan->conn_state |= L2CAP_CONN_SAR_RETRY;
return err;
}
- pi->conn_state &= ~L2CAP_CONN_SAR_RETRY;
- pi->conn_state &= ~L2CAP_CONN_SAR_SDU;
+ chan->conn_state &= ~L2CAP_CONN_SAR_RETRY;
+ chan->conn_state &= ~L2CAP_CONN_SAR_SDU;
- kfree_skb(pi->sdu);
+ kfree_skb(chan->sdu);
break;
}
@@ -2871,51 +3016,50 @@
return 0;
drop:
- kfree_skb(pi->sdu);
- pi->sdu = NULL;
+ kfree_skb(chan->sdu);
+ chan->sdu = NULL;
disconnect:
- l2cap_send_disconn_req(pi->conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
kfree_skb(skb);
return 0;
}
-static int l2cap_try_push_rx_skb(struct sock *sk)
+static int l2cap_try_push_rx_skb(struct l2cap_chan *chan)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct sk_buff *skb;
u16 control;
int err;
- while ((skb = skb_dequeue(BUSY_QUEUE(sk)))) {
+ while ((skb = skb_dequeue(&chan->busy_q))) {
control = bt_cb(skb)->sar << L2CAP_CTRL_SAR_SHIFT;
- err = l2cap_ertm_reassembly_sdu(sk, skb, control);
+ err = l2cap_ertm_reassembly_sdu(chan, skb, control);
if (err < 0) {
- skb_queue_head(BUSY_QUEUE(sk), skb);
+ skb_queue_head(&chan->busy_q, skb);
return -EBUSY;
}
- pi->buffer_seq = (pi->buffer_seq + 1) % 64;
+ chan->buffer_seq = (chan->buffer_seq + 1) % 64;
}
- if (!(pi->conn_state & L2CAP_CONN_RNR_SENT))
+ if (!(chan->conn_state & L2CAP_CONN_RNR_SENT))
goto done;
- control = pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ control = chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
control |= L2CAP_SUPER_RCV_READY | L2CAP_CTRL_POLL;
- l2cap_send_sframe(pi, control);
- l2cap_pi(sk)->retry_count = 1;
+ l2cap_send_sframe(chan, control);
+ chan->retry_count = 1;
- del_timer(&pi->retrans_timer);
+ del_timer(&chan->retrans_timer);
__mod_monitor_timer();
- l2cap_pi(sk)->conn_state |= L2CAP_CONN_WAIT_F;
+ chan->conn_state |= L2CAP_CONN_WAIT_F;
done:
- pi->conn_state &= ~L2CAP_CONN_LOCAL_BUSY;
- pi->conn_state &= ~L2CAP_CONN_RNR_SENT;
+ chan->conn_state &= ~L2CAP_CONN_LOCAL_BUSY;
+ chan->conn_state &= ~L2CAP_CONN_RNR_SENT;
- BT_DBG("sk %p, Exit local busy", sk);
+ BT_DBG("chan %p, Exit local busy", chan);
return 0;
}
@@ -2923,21 +3067,21 @@
static void l2cap_busy_work(struct work_struct *work)
{
DECLARE_WAITQUEUE(wait, current);
- struct l2cap_pinfo *pi =
- container_of(work, struct l2cap_pinfo, busy_work);
- struct sock *sk = (struct sock *)pi;
+ struct l2cap_chan *chan =
+ container_of(work, struct l2cap_chan, busy_work);
+ struct sock *sk = chan->sk;
int n_tries = 0, timeo = HZ/5, err;
struct sk_buff *skb;
lock_sock(sk);
add_wait_queue(sk_sleep(sk), &wait);
- while ((skb = skb_peek(BUSY_QUEUE(sk)))) {
+ while ((skb = skb_peek(&chan->busy_q))) {
set_current_state(TASK_INTERRUPTIBLE);
if (n_tries++ > L2CAP_LOCAL_BUSY_TRIES) {
err = -EBUSY;
- l2cap_send_disconn_req(pi->conn, sk, EBUSY);
+ l2cap_send_disconn_req(chan->conn, chan, EBUSY);
break;
}
@@ -2957,7 +3101,7 @@
if (err)
break;
- if (l2cap_try_push_rx_skb(sk) == 0)
+ if (l2cap_try_push_rx_skb(chan) == 0)
break;
}
@@ -2967,48 +3111,46 @@
release_sock(sk);
}
-static int l2cap_push_rx_skb(struct sock *sk, struct sk_buff *skb, u16 control)
+static int l2cap_push_rx_skb(struct l2cap_chan *chan, struct sk_buff *skb, u16 control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
int sctrl, err;
- if (pi->conn_state & L2CAP_CONN_LOCAL_BUSY) {
+ if (chan->conn_state & L2CAP_CONN_LOCAL_BUSY) {
bt_cb(skb)->sar = control >> L2CAP_CTRL_SAR_SHIFT;
- __skb_queue_tail(BUSY_QUEUE(sk), skb);
- return l2cap_try_push_rx_skb(sk);
+ __skb_queue_tail(&chan->busy_q, skb);
+ return l2cap_try_push_rx_skb(chan);
}
- err = l2cap_ertm_reassembly_sdu(sk, skb, control);
+ err = l2cap_ertm_reassembly_sdu(chan, skb, control);
if (err >= 0) {
- pi->buffer_seq = (pi->buffer_seq + 1) % 64;
+ chan->buffer_seq = (chan->buffer_seq + 1) % 64;
return err;
}
/* Busy Condition */
- BT_DBG("sk %p, Enter local busy", sk);
+ BT_DBG("chan %p, Enter local busy", chan);
- pi->conn_state |= L2CAP_CONN_LOCAL_BUSY;
+ chan->conn_state |= L2CAP_CONN_LOCAL_BUSY;
bt_cb(skb)->sar = control >> L2CAP_CTRL_SAR_SHIFT;
- __skb_queue_tail(BUSY_QUEUE(sk), skb);
+ __skb_queue_tail(&chan->busy_q, skb);
- sctrl = pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ sctrl = chan->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
sctrl |= L2CAP_SUPER_RCV_NOT_READY;
- l2cap_send_sframe(pi, sctrl);
+ l2cap_send_sframe(chan, sctrl);
- pi->conn_state |= L2CAP_CONN_RNR_SENT;
+ chan->conn_state |= L2CAP_CONN_RNR_SENT;
- del_timer(&pi->ack_timer);
+ del_timer(&chan->ack_timer);
- queue_work(_busy_wq, &pi->busy_work);
+ queue_work(_busy_wq, &chan->busy_work);
return err;
}
-static int l2cap_streaming_reassembly_sdu(struct sock *sk, struct sk_buff *skb, u16 control)
+static int l2cap_streaming_reassembly_sdu(struct l2cap_chan *chan, struct sk_buff *skb, u16 control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct sk_buff *_skb;
int err = -EINVAL;
@@ -3019,80 +3161,80 @@
switch (control & L2CAP_CTRL_SAR) {
case L2CAP_SDU_UNSEGMENTED:
- if (pi->conn_state & L2CAP_CONN_SAR_SDU) {
- kfree_skb(pi->sdu);
+ if (chan->conn_state & L2CAP_CONN_SAR_SDU) {
+ kfree_skb(chan->sdu);
break;
}
- err = sock_queue_rcv_skb(sk, skb);
+ err = sock_queue_rcv_skb(chan->sk, skb);
if (!err)
return 0;
break;
case L2CAP_SDU_START:
- if (pi->conn_state & L2CAP_CONN_SAR_SDU) {
- kfree_skb(pi->sdu);
+ if (chan->conn_state & L2CAP_CONN_SAR_SDU) {
+ kfree_skb(chan->sdu);
break;
}
- pi->sdu_len = get_unaligned_le16(skb->data);
+ chan->sdu_len = get_unaligned_le16(skb->data);
skb_pull(skb, 2);
- if (pi->sdu_len > pi->imtu) {
+ if (chan->sdu_len > chan->imtu) {
err = -EMSGSIZE;
break;
}
- pi->sdu = bt_skb_alloc(pi->sdu_len, GFP_ATOMIC);
- if (!pi->sdu) {
+ chan->sdu = bt_skb_alloc(chan->sdu_len, GFP_ATOMIC);
+ if (!chan->sdu) {
err = -ENOMEM;
break;
}
- memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+ memcpy(skb_put(chan->sdu, skb->len), skb->data, skb->len);
- pi->conn_state |= L2CAP_CONN_SAR_SDU;
- pi->partial_sdu_len = skb->len;
+ chan->conn_state |= L2CAP_CONN_SAR_SDU;
+ chan->partial_sdu_len = skb->len;
err = 0;
break;
case L2CAP_SDU_CONTINUE:
- if (!(pi->conn_state & L2CAP_CONN_SAR_SDU))
+ if (!(chan->conn_state & L2CAP_CONN_SAR_SDU))
break;
- memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+ memcpy(skb_put(chan->sdu, skb->len), skb->data, skb->len);
- pi->partial_sdu_len += skb->len;
- if (pi->partial_sdu_len > pi->sdu_len)
- kfree_skb(pi->sdu);
+ chan->partial_sdu_len += skb->len;
+ if (chan->partial_sdu_len > chan->sdu_len)
+ kfree_skb(chan->sdu);
else
err = 0;
break;
case L2CAP_SDU_END:
- if (!(pi->conn_state & L2CAP_CONN_SAR_SDU))
+ if (!(chan->conn_state & L2CAP_CONN_SAR_SDU))
break;
- memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+ memcpy(skb_put(chan->sdu, skb->len), skb->data, skb->len);
- pi->conn_state &= ~L2CAP_CONN_SAR_SDU;
- pi->partial_sdu_len += skb->len;
+ chan->conn_state &= ~L2CAP_CONN_SAR_SDU;
+ chan->partial_sdu_len += skb->len;
- if (pi->partial_sdu_len > pi->imtu)
+ if (chan->partial_sdu_len > chan->imtu)
goto drop;
- if (pi->partial_sdu_len == pi->sdu_len) {
- _skb = skb_clone(pi->sdu, GFP_ATOMIC);
- err = sock_queue_rcv_skb(sk, _skb);
+ if (chan->partial_sdu_len == chan->sdu_len) {
+ _skb = skb_clone(chan->sdu, GFP_ATOMIC);
+ err = sock_queue_rcv_skb(chan->sk, _skb);
if (err < 0)
kfree_skb(_skb);
}
err = 0;
drop:
- kfree_skb(pi->sdu);
+ kfree_skb(chan->sdu);
break;
}
@@ -3100,31 +3242,30 @@
return err;
}
-static void l2cap_check_srej_gap(struct sock *sk, u8 tx_seq)
+static void l2cap_check_srej_gap(struct l2cap_chan *chan, u8 tx_seq)
{
struct sk_buff *skb;
u16 control;
- while ((skb = skb_peek(SREJ_QUEUE(sk)))) {
+ while ((skb = skb_peek(&chan->srej_q))) {
if (bt_cb(skb)->tx_seq != tx_seq)
break;
- skb = skb_dequeue(SREJ_QUEUE(sk));
+ skb = skb_dequeue(&chan->srej_q);
control = bt_cb(skb)->sar << L2CAP_CTRL_SAR_SHIFT;
- l2cap_ertm_reassembly_sdu(sk, skb, control);
- l2cap_pi(sk)->buffer_seq_srej =
- (l2cap_pi(sk)->buffer_seq_srej + 1) % 64;
+ l2cap_ertm_reassembly_sdu(chan, skb, control);
+ chan->buffer_seq_srej =
+ (chan->buffer_seq_srej + 1) % 64;
tx_seq = (tx_seq + 1) % 64;
}
}
-static void l2cap_resend_srejframe(struct sock *sk, u8 tx_seq)
+static void l2cap_resend_srejframe(struct l2cap_chan *chan, u8 tx_seq)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct srej_list *l, *tmp;
u16 control;
- list_for_each_entry_safe(l, tmp, SREJ_LIST(sk), list) {
+ list_for_each_entry_safe(l, tmp, &chan->srej_l, list) {
if (l->tx_seq == tx_seq) {
list_del(&l->list);
kfree(l);
@@ -3132,107 +3273,105 @@
}
control = L2CAP_SUPER_SELECT_REJECT;
control |= l->tx_seq << L2CAP_CTRL_REQSEQ_SHIFT;
- l2cap_send_sframe(pi, control);
+ l2cap_send_sframe(chan, control);
list_del(&l->list);
- list_add_tail(&l->list, SREJ_LIST(sk));
+ list_add_tail(&l->list, &chan->srej_l);
}
}
-static void l2cap_send_srejframe(struct sock *sk, u8 tx_seq)
+static void l2cap_send_srejframe(struct l2cap_chan *chan, u8 tx_seq)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
struct srej_list *new;
u16 control;
- while (tx_seq != pi->expected_tx_seq) {
+ while (tx_seq != chan->expected_tx_seq) {
control = L2CAP_SUPER_SELECT_REJECT;
- control |= pi->expected_tx_seq << L2CAP_CTRL_REQSEQ_SHIFT;
- l2cap_send_sframe(pi, control);
+ control |= chan->expected_tx_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ l2cap_send_sframe(chan, control);
new = kzalloc(sizeof(struct srej_list), GFP_ATOMIC);
- new->tx_seq = pi->expected_tx_seq;
- pi->expected_tx_seq = (pi->expected_tx_seq + 1) % 64;
- list_add_tail(&new->list, SREJ_LIST(sk));
+ new->tx_seq = chan->expected_tx_seq;
+ chan->expected_tx_seq = (chan->expected_tx_seq + 1) % 64;
+ list_add_tail(&new->list, &chan->srej_l);
}
- pi->expected_tx_seq = (pi->expected_tx_seq + 1) % 64;
+ chan->expected_tx_seq = (chan->expected_tx_seq + 1) % 64;
}
-static inline int l2cap_data_channel_iframe(struct sock *sk, u16 rx_control, struct sk_buff *skb)
+static inline int l2cap_data_channel_iframe(struct l2cap_chan *chan, u16 rx_control, struct sk_buff *skb)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
u8 tx_seq = __get_txseq(rx_control);
u8 req_seq = __get_reqseq(rx_control);
u8 sar = rx_control >> L2CAP_CTRL_SAR_SHIFT;
int tx_seq_offset, expected_tx_seq_offset;
- int num_to_ack = (pi->tx_win/6) + 1;
+ int num_to_ack = (chan->tx_win/6) + 1;
int err = 0;
- BT_DBG("sk %p len %d tx_seq %d rx_control 0x%4.4x", sk, skb->len, tx_seq,
- rx_control);
+ BT_DBG("chan %p len %d tx_seq %d rx_control 0x%4.4x", chan, skb->len,
+ tx_seq, rx_control);
if (L2CAP_CTRL_FINAL & rx_control &&
- l2cap_pi(sk)->conn_state & L2CAP_CONN_WAIT_F) {
- del_timer(&pi->monitor_timer);
- if (pi->unacked_frames > 0)
+ chan->conn_state & L2CAP_CONN_WAIT_F) {
+ del_timer(&chan->monitor_timer);
+ if (chan->unacked_frames > 0)
__mod_retrans_timer();
- pi->conn_state &= ~L2CAP_CONN_WAIT_F;
+ chan->conn_state &= ~L2CAP_CONN_WAIT_F;
}
- pi->expected_ack_seq = req_seq;
- l2cap_drop_acked_frames(sk);
+ chan->expected_ack_seq = req_seq;
+ l2cap_drop_acked_frames(chan);
- if (tx_seq == pi->expected_tx_seq)
+ if (tx_seq == chan->expected_tx_seq)
goto expected;
- tx_seq_offset = (tx_seq - pi->buffer_seq) % 64;
+ tx_seq_offset = (tx_seq - chan->buffer_seq) % 64;
if (tx_seq_offset < 0)
tx_seq_offset += 64;
/* invalid tx_seq */
- if (tx_seq_offset >= pi->tx_win) {
- l2cap_send_disconn_req(pi->conn, sk, ECONNRESET);
+ if (tx_seq_offset >= chan->tx_win) {
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
goto drop;
}
- if (pi->conn_state == L2CAP_CONN_LOCAL_BUSY)
+ if (chan->conn_state == L2CAP_CONN_LOCAL_BUSY)
goto drop;
- if (pi->conn_state & L2CAP_CONN_SREJ_SENT) {
+ if (chan->conn_state & L2CAP_CONN_SREJ_SENT) {
struct srej_list *first;
- first = list_first_entry(SREJ_LIST(sk),
+ first = list_first_entry(&chan->srej_l,
struct srej_list, list);
if (tx_seq == first->tx_seq) {
- l2cap_add_to_srej_queue(sk, skb, tx_seq, sar);
- l2cap_check_srej_gap(sk, tx_seq);
+ l2cap_add_to_srej_queue(chan, skb, tx_seq, sar);
+ l2cap_check_srej_gap(chan, tx_seq);
list_del(&first->list);
kfree(first);
- if (list_empty(SREJ_LIST(sk))) {
- pi->buffer_seq = pi->buffer_seq_srej;
- pi->conn_state &= ~L2CAP_CONN_SREJ_SENT;
- l2cap_send_ack(pi);
- BT_DBG("sk %p, Exit SREJ_SENT", sk);
+ if (list_empty(&chan->srej_l)) {
+ chan->buffer_seq = chan->buffer_seq_srej;
+ chan->conn_state &= ~L2CAP_CONN_SREJ_SENT;
+ l2cap_send_ack(chan);
+ BT_DBG("chan %p, Exit SREJ_SENT", chan);
}
} else {
struct srej_list *l;
/* duplicated tx_seq */
- if (l2cap_add_to_srej_queue(sk, skb, tx_seq, sar) < 0)
+ if (l2cap_add_to_srej_queue(chan, skb, tx_seq, sar) < 0)
goto drop;
- list_for_each_entry(l, SREJ_LIST(sk), list) {
+ list_for_each_entry(l, &chan->srej_l, list) {
if (l->tx_seq == tx_seq) {
- l2cap_resend_srejframe(sk, tx_seq);
+ l2cap_resend_srejframe(chan, tx_seq);
return 0;
}
}
- l2cap_send_srejframe(sk, tx_seq);
+ l2cap_send_srejframe(chan, tx_seq);
}
} else {
expected_tx_seq_offset =
- (pi->expected_tx_seq - pi->buffer_seq) % 64;
+ (chan->expected_tx_seq - chan->buffer_seq) % 64;
if (expected_tx_seq_offset < 0)
expected_tx_seq_offset += 64;
@@ -3240,51 +3379,51 @@
if (tx_seq_offset < expected_tx_seq_offset)
goto drop;
- pi->conn_state |= L2CAP_CONN_SREJ_SENT;
+ chan->conn_state |= L2CAP_CONN_SREJ_SENT;
- BT_DBG("sk %p, Enter SREJ", sk);
+ BT_DBG("chan %p, Enter SREJ", chan);
- INIT_LIST_HEAD(SREJ_LIST(sk));
- pi->buffer_seq_srej = pi->buffer_seq;
+ INIT_LIST_HEAD(&chan->srej_l);
+ chan->buffer_seq_srej = chan->buffer_seq;
- __skb_queue_head_init(SREJ_QUEUE(sk));
- __skb_queue_head_init(BUSY_QUEUE(sk));
- l2cap_add_to_srej_queue(sk, skb, tx_seq, sar);
+ __skb_queue_head_init(&chan->srej_q);
+ __skb_queue_head_init(&chan->busy_q);
+ l2cap_add_to_srej_queue(chan, skb, tx_seq, sar);
- pi->conn_state |= L2CAP_CONN_SEND_PBIT;
+ chan->conn_state |= L2CAP_CONN_SEND_PBIT;
- l2cap_send_srejframe(sk, tx_seq);
+ l2cap_send_srejframe(chan, tx_seq);
- del_timer(&pi->ack_timer);
+ del_timer(&chan->ack_timer);
}
return 0;
expected:
- pi->expected_tx_seq = (pi->expected_tx_seq + 1) % 64;
+ chan->expected_tx_seq = (chan->expected_tx_seq + 1) % 64;
- if (pi->conn_state & L2CAP_CONN_SREJ_SENT) {
+ if (chan->conn_state & L2CAP_CONN_SREJ_SENT) {
bt_cb(skb)->tx_seq = tx_seq;
bt_cb(skb)->sar = sar;
- __skb_queue_tail(SREJ_QUEUE(sk), skb);
+ __skb_queue_tail(&chan->srej_q, skb);
return 0;
}
- err = l2cap_push_rx_skb(sk, skb, rx_control);
+ err = l2cap_push_rx_skb(chan, skb, rx_control);
if (err < 0)
return 0;
if (rx_control & L2CAP_CTRL_FINAL) {
- if (pi->conn_state & L2CAP_CONN_REJ_ACT)
- pi->conn_state &= ~L2CAP_CONN_REJ_ACT;
+ if (chan->conn_state & L2CAP_CONN_REJ_ACT)
+ chan->conn_state &= ~L2CAP_CONN_REJ_ACT;
else
- l2cap_retransmit_frames(sk);
+ l2cap_retransmit_frames(chan);
}
__mod_ack_timer();
- pi->num_acked = (pi->num_acked + 1) % num_to_ack;
- if (pi->num_acked == num_to_ack - 1)
- l2cap_send_ack(pi);
+ chan->num_acked = (chan->num_acked + 1) % num_to_ack;
+ if (chan->num_acked == num_to_ack - 1)
+ l2cap_send_ack(chan);
return 0;
@@ -3293,165 +3432,160 @@
return 0;
}
-static inline void l2cap_data_channel_rrframe(struct sock *sk, u16 rx_control)
+static inline void l2cap_data_channel_rrframe(struct l2cap_chan *chan, u16 rx_control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
-
- BT_DBG("sk %p, req_seq %d ctrl 0x%4.4x", sk, __get_reqseq(rx_control),
+ BT_DBG("chan %p, req_seq %d ctrl 0x%4.4x", chan, __get_reqseq(rx_control),
rx_control);
- pi->expected_ack_seq = __get_reqseq(rx_control);
- l2cap_drop_acked_frames(sk);
+ chan->expected_ack_seq = __get_reqseq(rx_control);
+ l2cap_drop_acked_frames(chan);
if (rx_control & L2CAP_CTRL_POLL) {
- pi->conn_state |= L2CAP_CONN_SEND_FBIT;
- if (pi->conn_state & L2CAP_CONN_SREJ_SENT) {
- if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
- (pi->unacked_frames > 0))
+ chan->conn_state |= L2CAP_CONN_SEND_FBIT;
+ if (chan->conn_state & L2CAP_CONN_SREJ_SENT) {
+ if ((chan->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
+ (chan->unacked_frames > 0))
__mod_retrans_timer();
- pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
- l2cap_send_srejtail(sk);
+ chan->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ l2cap_send_srejtail(chan);
} else {
- l2cap_send_i_or_rr_or_rnr(sk);
+ l2cap_send_i_or_rr_or_rnr(chan);
}
} else if (rx_control & L2CAP_CTRL_FINAL) {
- pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ chan->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
- if (pi->conn_state & L2CAP_CONN_REJ_ACT)
- pi->conn_state &= ~L2CAP_CONN_REJ_ACT;
+ if (chan->conn_state & L2CAP_CONN_REJ_ACT)
+ chan->conn_state &= ~L2CAP_CONN_REJ_ACT;
else
- l2cap_retransmit_frames(sk);
+ l2cap_retransmit_frames(chan);
} else {
- if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
- (pi->unacked_frames > 0))
+ if ((chan->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
+ (chan->unacked_frames > 0))
__mod_retrans_timer();
- pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
- if (pi->conn_state & L2CAP_CONN_SREJ_SENT)
- l2cap_send_ack(pi);
+ chan->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ if (chan->conn_state & L2CAP_CONN_SREJ_SENT)
+ l2cap_send_ack(chan);
else
- l2cap_ertm_send(sk);
+ l2cap_ertm_send(chan);
}
}
-static inline void l2cap_data_channel_rejframe(struct sock *sk, u16 rx_control)
+static inline void l2cap_data_channel_rejframe(struct l2cap_chan *chan, u16 rx_control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
u8 tx_seq = __get_reqseq(rx_control);
- BT_DBG("sk %p, req_seq %d ctrl 0x%4.4x", sk, tx_seq, rx_control);
+ BT_DBG("chan %p, req_seq %d ctrl 0x%4.4x", chan, tx_seq, rx_control);
- pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ chan->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
- pi->expected_ack_seq = tx_seq;
- l2cap_drop_acked_frames(sk);
+ chan->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(chan);
if (rx_control & L2CAP_CTRL_FINAL) {
- if (pi->conn_state & L2CAP_CONN_REJ_ACT)
- pi->conn_state &= ~L2CAP_CONN_REJ_ACT;
+ if (chan->conn_state & L2CAP_CONN_REJ_ACT)
+ chan->conn_state &= ~L2CAP_CONN_REJ_ACT;
else
- l2cap_retransmit_frames(sk);
+ l2cap_retransmit_frames(chan);
} else {
- l2cap_retransmit_frames(sk);
+ l2cap_retransmit_frames(chan);
- if (pi->conn_state & L2CAP_CONN_WAIT_F)
- pi->conn_state |= L2CAP_CONN_REJ_ACT;
+ if (chan->conn_state & L2CAP_CONN_WAIT_F)
+ chan->conn_state |= L2CAP_CONN_REJ_ACT;
}
}
-static inline void l2cap_data_channel_srejframe(struct sock *sk, u16 rx_control)
+static inline void l2cap_data_channel_srejframe(struct l2cap_chan *chan, u16 rx_control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
u8 tx_seq = __get_reqseq(rx_control);
- BT_DBG("sk %p, req_seq %d ctrl 0x%4.4x", sk, tx_seq, rx_control);
+ BT_DBG("chan %p, req_seq %d ctrl 0x%4.4x", chan, tx_seq, rx_control);
- pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ chan->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
if (rx_control & L2CAP_CTRL_POLL) {
- pi->expected_ack_seq = tx_seq;
- l2cap_drop_acked_frames(sk);
+ chan->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(chan);
- pi->conn_state |= L2CAP_CONN_SEND_FBIT;
- l2cap_retransmit_one_frame(sk, tx_seq);
+ chan->conn_state |= L2CAP_CONN_SEND_FBIT;
+ l2cap_retransmit_one_frame(chan, tx_seq);
- l2cap_ertm_send(sk);
+ l2cap_ertm_send(chan);
- if (pi->conn_state & L2CAP_CONN_WAIT_F) {
- pi->srej_save_reqseq = tx_seq;
- pi->conn_state |= L2CAP_CONN_SREJ_ACT;
+ if (chan->conn_state & L2CAP_CONN_WAIT_F) {
+ chan->srej_save_reqseq = tx_seq;
+ chan->conn_state |= L2CAP_CONN_SREJ_ACT;
}
} else if (rx_control & L2CAP_CTRL_FINAL) {
- if ((pi->conn_state & L2CAP_CONN_SREJ_ACT) &&
- pi->srej_save_reqseq == tx_seq)
- pi->conn_state &= ~L2CAP_CONN_SREJ_ACT;
+ if ((chan->conn_state & L2CAP_CONN_SREJ_ACT) &&
+ chan->srej_save_reqseq == tx_seq)
+ chan->conn_state &= ~L2CAP_CONN_SREJ_ACT;
else
- l2cap_retransmit_one_frame(sk, tx_seq);
+ l2cap_retransmit_one_frame(chan, tx_seq);
} else {
- l2cap_retransmit_one_frame(sk, tx_seq);
- if (pi->conn_state & L2CAP_CONN_WAIT_F) {
- pi->srej_save_reqseq = tx_seq;
- pi->conn_state |= L2CAP_CONN_SREJ_ACT;
+ l2cap_retransmit_one_frame(chan, tx_seq);
+ if (chan->conn_state & L2CAP_CONN_WAIT_F) {
+ chan->srej_save_reqseq = tx_seq;
+ chan->conn_state |= L2CAP_CONN_SREJ_ACT;
}
}
}
-static inline void l2cap_data_channel_rnrframe(struct sock *sk, u16 rx_control)
+static inline void l2cap_data_channel_rnrframe(struct l2cap_chan *chan, u16 rx_control)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
u8 tx_seq = __get_reqseq(rx_control);
- BT_DBG("sk %p, req_seq %d ctrl 0x%4.4x", sk, tx_seq, rx_control);
+ BT_DBG("chan %p, req_seq %d ctrl 0x%4.4x", chan, tx_seq, rx_control);
- pi->conn_state |= L2CAP_CONN_REMOTE_BUSY;
- pi->expected_ack_seq = tx_seq;
- l2cap_drop_acked_frames(sk);
+ chan->conn_state |= L2CAP_CONN_REMOTE_BUSY;
+ chan->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(chan);
if (rx_control & L2CAP_CTRL_POLL)
- pi->conn_state |= L2CAP_CONN_SEND_FBIT;
+ chan->conn_state |= L2CAP_CONN_SEND_FBIT;
- if (!(pi->conn_state & L2CAP_CONN_SREJ_SENT)) {
- del_timer(&pi->retrans_timer);
+ if (!(chan->conn_state & L2CAP_CONN_SREJ_SENT)) {
+ del_timer(&chan->retrans_timer);
if (rx_control & L2CAP_CTRL_POLL)
- l2cap_send_rr_or_rnr(pi, L2CAP_CTRL_FINAL);
+ l2cap_send_rr_or_rnr(chan, L2CAP_CTRL_FINAL);
return;
}
if (rx_control & L2CAP_CTRL_POLL)
- l2cap_send_srejtail(sk);
+ l2cap_send_srejtail(chan);
else
- l2cap_send_sframe(pi, L2CAP_SUPER_RCV_READY);
+ l2cap_send_sframe(chan, L2CAP_SUPER_RCV_READY);
}
-static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, struct sk_buff *skb)
+static inline int l2cap_data_channel_sframe(struct l2cap_chan *chan, u16 rx_control, struct sk_buff *skb)
{
- BT_DBG("sk %p rx_control 0x%4.4x len %d", sk, rx_control, skb->len);
+ BT_DBG("chan %p rx_control 0x%4.4x len %d", chan, rx_control, skb->len);
if (L2CAP_CTRL_FINAL & rx_control &&
- l2cap_pi(sk)->conn_state & L2CAP_CONN_WAIT_F) {
- del_timer(&l2cap_pi(sk)->monitor_timer);
- if (l2cap_pi(sk)->unacked_frames > 0)
+ chan->conn_state & L2CAP_CONN_WAIT_F) {
+ del_timer(&chan->monitor_timer);
+ if (chan->unacked_frames > 0)
__mod_retrans_timer();
- l2cap_pi(sk)->conn_state &= ~L2CAP_CONN_WAIT_F;
+ chan->conn_state &= ~L2CAP_CONN_WAIT_F;
}
switch (rx_control & L2CAP_CTRL_SUPERVISE) {
case L2CAP_SUPER_RCV_READY:
- l2cap_data_channel_rrframe(sk, rx_control);
+ l2cap_data_channel_rrframe(chan, rx_control);
break;
case L2CAP_SUPER_REJECT:
- l2cap_data_channel_rejframe(sk, rx_control);
+ l2cap_data_channel_rejframe(chan, rx_control);
break;
case L2CAP_SUPER_SELECT_REJECT:
- l2cap_data_channel_srejframe(sk, rx_control);
+ l2cap_data_channel_srejframe(chan, rx_control);
break;
case L2CAP_SUPER_RCV_NOT_READY:
- l2cap_data_channel_rnrframe(sk, rx_control);
+ l2cap_data_channel_rnrframe(chan, rx_control);
break;
}
@@ -3461,7 +3595,7 @@
static int l2cap_ertm_data_rcv(struct sock *sk, struct sk_buff *skb)
{
- struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
u16 control;
u8 req_seq;
int len, next_tx_seq_offset, req_seq_offset;
@@ -3475,51 +3609,51 @@
* Receiver will miss it and start proper recovery
* procedures and ask retransmission.
*/
- if (l2cap_check_fcs(pi, skb))
+ if (l2cap_check_fcs(chan, skb))
goto drop;
if (__is_sar_start(control) && __is_iframe(control))
len -= 2;
- if (pi->fcs == L2CAP_FCS_CRC16)
+ if (chan->fcs == L2CAP_FCS_CRC16)
len -= 2;
- if (len > pi->mps) {
- l2cap_send_disconn_req(pi->conn, sk, ECONNRESET);
+ if (len > chan->mps) {
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
goto drop;
}
req_seq = __get_reqseq(control);
- req_seq_offset = (req_seq - pi->expected_ack_seq) % 64;
+ req_seq_offset = (req_seq - chan->expected_ack_seq) % 64;
if (req_seq_offset < 0)
req_seq_offset += 64;
next_tx_seq_offset =
- (pi->next_tx_seq - pi->expected_ack_seq) % 64;
+ (chan->next_tx_seq - chan->expected_ack_seq) % 64;
if (next_tx_seq_offset < 0)
next_tx_seq_offset += 64;
/* check for invalid req-seq */
if (req_seq_offset > next_tx_seq_offset) {
- l2cap_send_disconn_req(pi->conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
goto drop;
}
if (__is_iframe(control)) {
if (len < 0) {
- l2cap_send_disconn_req(pi->conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
goto drop;
}
- l2cap_data_channel_iframe(sk, control, skb);
+ l2cap_data_channel_iframe(chan, control, skb);
} else {
if (len != 0) {
BT_ERR("%d", len);
- l2cap_send_disconn_req(pi->conn, sk, ECONNRESET);
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
goto drop;
}
- l2cap_data_channel_sframe(sk, control, skb);
+ l2cap_data_channel_sframe(chan, control, skb);
}
return 0;
@@ -3531,33 +3665,35 @@
static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk_buff *skb)
{
- struct sock *sk;
+ struct l2cap_chan *chan;
+ struct sock *sk = NULL;
struct l2cap_pinfo *pi;
u16 control;
u8 tx_seq;
int len;
- sk = l2cap_get_chan_by_scid(&conn->chan_list, cid);
- if (!sk) {
+ chan = l2cap_get_chan_by_scid(conn, cid);
+ if (!chan) {
BT_DBG("unknown cid 0x%4.4x", cid);
goto drop;
}
+ sk = chan->sk;
pi = l2cap_pi(sk);
- BT_DBG("sk %p, len %d", sk, skb->len);
+ BT_DBG("chan %p, len %d", chan, skb->len);
if (sk->sk_state != BT_CONNECTED)
goto drop;
- switch (pi->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_BASIC:
/* If socket recv buffers overflows we drop data here
* which is *bad* because L2CAP has to be reliable.
* But we don't have any other choice. L2CAP doesn't
* provide flow control mechanism. */
- if (pi->imtu < skb->len)
+ if (chan->imtu < skb->len)
goto drop;
if (!sock_queue_rcv_skb(sk, skb))
@@ -3579,31 +3715,31 @@
skb_pull(skb, 2);
len = skb->len;
- if (l2cap_check_fcs(pi, skb))
+ if (l2cap_check_fcs(chan, skb))
goto drop;
if (__is_sar_start(control))
len -= 2;
- if (pi->fcs == L2CAP_FCS_CRC16)
+ if (chan->fcs == L2CAP_FCS_CRC16)
len -= 2;
- if (len > pi->mps || len < 0 || __is_sframe(control))
+ if (len > chan->mps || len < 0 || __is_sframe(control))
goto drop;
tx_seq = __get_txseq(control);
- if (pi->expected_tx_seq == tx_seq)
- pi->expected_tx_seq = (pi->expected_tx_seq + 1) % 64;
+ if (chan->expected_tx_seq == tx_seq)
+ chan->expected_tx_seq = (chan->expected_tx_seq + 1) % 64;
else
- pi->expected_tx_seq = (tx_seq + 1) % 64;
+ chan->expected_tx_seq = (tx_seq + 1) % 64;
- l2cap_streaming_reassembly_sdu(sk, skb, control);
+ l2cap_streaming_reassembly_sdu(chan, skb, control);
goto done;
default:
- BT_DBG("sk %p: bad mode 0x%2.2x", sk, pi->mode);
+ BT_DBG("chan %p: bad mode 0x%2.2x", chan, chan->mode);
break;
}
@@ -3619,12 +3755,15 @@
static inline int l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm, struct sk_buff *skb)
{
- struct sock *sk;
+ struct sock *sk = NULL;
+ struct l2cap_chan *chan;
- sk = l2cap_get_sock_by_psm(0, psm, conn->src);
- if (!sk)
+ chan = l2cap_global_chan_by_psm(0, psm, conn->src);
+ if (!chan)
goto drop;
+ sk = chan->sk;
+
bh_lock_sock(sk);
BT_DBG("sk %p, len %d", sk, skb->len);
@@ -3632,7 +3771,40 @@
if (sk->sk_state != BT_BOUND && sk->sk_state != BT_CONNECTED)
goto drop;
- if (l2cap_pi(sk)->imtu < skb->len)
+ if (l2cap_pi(sk)->chan->imtu < skb->len)
+ goto drop;
+
+ if (!sock_queue_rcv_skb(sk, skb))
+ goto done;
+
+drop:
+ kfree_skb(skb);
+
+done:
+ if (sk)
+ bh_unlock_sock(sk);
+ return 0;
+}
+
+static inline int l2cap_att_channel(struct l2cap_conn *conn, __le16 cid, struct sk_buff *skb)
+{
+ struct sock *sk = NULL;
+ struct l2cap_chan *chan;
+
+ chan = l2cap_global_chan_by_scid(0, cid, conn->src);
+ if (!chan)
+ goto drop;
+
+ sk = chan->sk;
+
+ bh_lock_sock(sk);
+
+ BT_DBG("sk %p, len %d", sk, skb->len);
+
+ if (sk->sk_state != BT_BOUND && sk->sk_state != BT_CONNECTED)
+ goto drop;
+
+ if (l2cap_pi(sk)->chan->imtu < skb->len)
goto drop;
if (!sock_queue_rcv_skb(sk, skb))
@@ -3676,6 +3848,10 @@
l2cap_conless_channel(conn, psm, skb);
break;
+ case L2CAP_CID_LE_DATA:
+ l2cap_att_channel(conn, cid, skb);
+ break;
+
default:
l2cap_data_channel(conn, cid, skb);
break;
@@ -3687,8 +3863,7 @@
static int l2cap_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type)
{
int exact = 0, lm1 = 0, lm2 = 0;
- register struct sock *sk;
- struct hlist_node *node;
+ struct l2cap_chan *c;
if (type != ACL_LINK)
return -EINVAL;
@@ -3696,23 +3871,25 @@
BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr));
/* Find listening sockets and check their link_mode */
- read_lock(&l2cap_sk_list.lock);
- sk_for_each(sk, node, &l2cap_sk_list.head) {
+ read_lock(&chan_list_lock);
+ list_for_each_entry(c, &chan_list, global_l) {
+ struct sock *sk = c->sk;
+
if (sk->sk_state != BT_LISTEN)
continue;
if (!bacmp(&bt_sk(sk)->src, &hdev->bdaddr)) {
lm1 |= HCI_LM_ACCEPT;
- if (l2cap_pi(sk)->role_switch)
+ if (c->role_switch)
lm1 |= HCI_LM_MASTER;
exact++;
} else if (!bacmp(&bt_sk(sk)->src, BDADDR_ANY)) {
lm2 |= HCI_LM_ACCEPT;
- if (l2cap_pi(sk)->role_switch)
+ if (c->role_switch)
lm2 |= HCI_LM_MASTER;
}
}
- read_unlock(&l2cap_sk_list.lock);
+ read_unlock(&chan_list_lock);
return exact ? lm1 : lm2;
}
@@ -3760,49 +3937,50 @@
return 0;
}
-static inline void l2cap_check_encryption(struct sock *sk, u8 encrypt)
+static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt)
{
+ struct sock *sk = chan->sk;
+
if (sk->sk_type != SOCK_SEQPACKET && sk->sk_type != SOCK_STREAM)
return;
if (encrypt == 0x00) {
- if (l2cap_pi(sk)->sec_level == BT_SECURITY_MEDIUM) {
+ if (chan->sec_level == BT_SECURITY_MEDIUM) {
l2cap_sock_clear_timer(sk);
l2cap_sock_set_timer(sk, HZ * 5);
- } else if (l2cap_pi(sk)->sec_level == BT_SECURITY_HIGH)
+ } else if (chan->sec_level == BT_SECURITY_HIGH)
__l2cap_sock_close(sk, ECONNREFUSED);
} else {
- if (l2cap_pi(sk)->sec_level == BT_SECURITY_MEDIUM)
+ if (chan->sec_level == BT_SECURITY_MEDIUM)
l2cap_sock_clear_timer(sk);
}
}
static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
{
- struct l2cap_chan_list *l;
struct l2cap_conn *conn = hcon->l2cap_data;
- struct sock *sk;
+ struct l2cap_chan *chan;
if (!conn)
return 0;
- l = &conn->chan_list;
-
BT_DBG("conn %p", conn);
- read_lock(&l->lock);
+ read_lock(&conn->chan_lock);
- for (sk = l->head; sk; sk = l2cap_pi(sk)->next_c) {
+ list_for_each_entry(chan, &conn->chan_l, list) {
+ struct sock *sk = chan->sk;
+
bh_lock_sock(sk);
- if (l2cap_pi(sk)->conf_state & L2CAP_CONF_CONNECT_PEND) {
+ if (chan->conf_state & L2CAP_CONF_CONNECT_PEND) {
bh_unlock_sock(sk);
continue;
}
if (!status && (sk->sk_state == BT_CONNECTED ||
sk->sk_state == BT_CONFIG)) {
- l2cap_check_encryption(sk, encrypt);
+ l2cap_check_encryption(chan, encrypt);
bh_unlock_sock(sk);
continue;
}
@@ -3810,13 +3988,13 @@
if (sk->sk_state == BT_CONNECT) {
if (!status) {
struct l2cap_conn_req req;
- req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
- req.psm = l2cap_pi(sk)->psm;
+ req.scid = cpu_to_le16(chan->scid);
+ req.psm = chan->psm;
- l2cap_pi(sk)->ident = l2cap_get_ident(conn);
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
+ chan->ident = l2cap_get_ident(conn);
+ chan->conf_state |= L2CAP_CONF_CONNECT_PEND;
- l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
+ l2cap_send_cmd(conn, chan->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
} else {
l2cap_sock_clear_timer(sk);
@@ -3835,18 +4013,18 @@
result = L2CAP_CR_SEC_BLOCK;
}
- rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
- rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
+ rsp.scid = cpu_to_le16(chan->dcid);
+ rsp.dcid = cpu_to_le16(chan->scid);
rsp.result = cpu_to_le16(result);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
- l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
- L2CAP_CONN_RSP, sizeof(rsp), &rsp);
+ l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
+ sizeof(rsp), &rsp);
}
bh_unlock_sock(sk);
}
- read_unlock(&l->lock);
+ read_unlock(&conn->chan_lock);
return 0;
}
@@ -3865,7 +4043,7 @@
if (!(flags & ACL_CONT)) {
struct l2cap_hdr *hdr;
- struct sock *sk;
+ struct l2cap_chan *chan;
u16 cid;
int len;
@@ -3903,19 +4081,22 @@
goto drop;
}
- sk = l2cap_get_chan_by_scid(&conn->chan_list, cid);
+ chan = l2cap_get_chan_by_scid(conn, cid);
- if (sk && l2cap_pi(sk)->imtu < len - L2CAP_HDR_SIZE) {
- BT_ERR("Frame exceeding recv MTU (len %d, MTU %d)",
- len, l2cap_pi(sk)->imtu);
+ if (chan && chan->sk) {
+ struct sock *sk = chan->sk;
+
+ if (chan->imtu < len - L2CAP_HDR_SIZE) {
+ BT_ERR("Frame exceeding recv MTU (len %d, "
+ "MTU %d)", len,
+ chan->imtu);
+ bh_unlock_sock(sk);
+ l2cap_conn_unreliable(conn, ECOMM);
+ goto drop;
+ }
bh_unlock_sock(sk);
- l2cap_conn_unreliable(conn, ECOMM);
- goto drop;
}
- if (sk)
- bh_unlock_sock(sk);
-
/* Allocate skb for the complete frame (with header) */
conn->rx_skb = bt_skb_alloc(len, GFP_ATOMIC);
if (!conn->rx_skb)
@@ -3961,24 +4142,22 @@
static int l2cap_debugfs_show(struct seq_file *f, void *p)
{
- struct sock *sk;
- struct hlist_node *node;
+ struct l2cap_chan *c;
- read_lock_bh(&l2cap_sk_list.lock);
+ read_lock_bh(&chan_list_lock);
- sk_for_each(sk, node, &l2cap_sk_list.head) {
- struct l2cap_pinfo *pi = l2cap_pi(sk);
+ list_for_each_entry(c, &chan_list, global_l) {
+ struct sock *sk = c->sk;
seq_printf(f, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d %d %d\n",
batostr(&bt_sk(sk)->src),
batostr(&bt_sk(sk)->dst),
- sk->sk_state, __le16_to_cpu(pi->psm),
- pi->scid, pi->dcid,
- pi->imtu, pi->omtu, pi->sec_level,
- pi->mode);
+ sk->sk_state, __le16_to_cpu(c->psm),
+ c->scid, c->dcid, c->imtu, c->omtu,
+ c->sec_level, c->mode);
}
- read_unlock_bh(&l2cap_sk_list.lock);
+ read_unlock_bh(&chan_list_lock);
return 0;
}
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 299fe56..18dc9888 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -30,6 +30,8 @@
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
+static const struct proto_ops l2cap_sock_ops;
+
/* ---- L2CAP timers ---- */
static void l2cap_sock_timeout(unsigned long arg)
{
@@ -51,7 +53,7 @@
if (sk->sk_state == BT_CONNECTED || sk->sk_state == BT_CONFIG)
reason = ECONNREFUSED;
else if (sk->sk_state == BT_CONNECT &&
- l2cap_pi(sk)->sec_level != BT_SECURITY_SDP)
+ l2cap_pi(sk)->chan->sec_level != BT_SECURITY_SDP)
reason = ECONNREFUSED;
else
reason = ETIMEDOUT;
@@ -76,21 +78,10 @@
sk_stop_timer(sk, &sk->sk_timer);
}
-static struct sock *__l2cap_get_sock_by_addr(__le16 psm, bdaddr_t *src)
-{
- struct sock *sk;
- struct hlist_node *node;
- sk_for_each(sk, node, &l2cap_sk_list.head)
- if (l2cap_pi(sk)->sport == psm && !bacmp(&bt_sk(sk)->src, src))
- goto found;
- sk = NULL;
-found:
- return sk;
-}
-
static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct sockaddr_l2 la;
int len, err = 0;
@@ -129,26 +120,20 @@
}
}
- write_lock_bh(&l2cap_sk_list.lock);
-
- if (la.l2_psm && __l2cap_get_sock_by_addr(la.l2_psm, &la.l2_bdaddr)) {
- err = -EADDRINUSE;
- } else {
- /* Save source address */
- bacpy(&bt_sk(sk)->src, &la.l2_bdaddr);
- l2cap_pi(sk)->psm = la.l2_psm;
- l2cap_pi(sk)->sport = la.l2_psm;
- sk->sk_state = BT_BOUND;
-
- if (__le16_to_cpu(la.l2_psm) == 0x0001 ||
- __le16_to_cpu(la.l2_psm) == 0x0003)
- l2cap_pi(sk)->sec_level = BT_SECURITY_SDP;
- }
-
if (la.l2_cid)
- l2cap_pi(sk)->scid = la.l2_cid;
+ err = l2cap_add_scid(chan, la.l2_cid);
+ else
+ err = l2cap_add_psm(chan, &la.l2_bdaddr, la.l2_psm);
- write_unlock_bh(&l2cap_sk_list.lock);
+ if (err < 0)
+ goto done;
+
+ if (__le16_to_cpu(la.l2_psm) == 0x0001 ||
+ __le16_to_cpu(la.l2_psm) == 0x0003)
+ chan->sec_level = BT_SECURITY_SDP;
+
+ bacpy(&bt_sk(sk)->src, &la.l2_bdaddr);
+ sk->sk_state = BT_BOUND;
done:
release_sock(sk);
@@ -158,6 +143,7 @@
static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct sockaddr_l2 la;
int len, err = 0;
@@ -182,7 +168,7 @@
goto done;
}
- switch (l2cap_pi(sk)->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_BASIC:
break;
case L2CAP_MODE_ERTM:
@@ -226,10 +212,10 @@
/* Set destination address and psm */
bacpy(&bt_sk(sk)->dst, &la.l2_bdaddr);
- l2cap_pi(sk)->psm = la.l2_psm;
- l2cap_pi(sk)->dcid = la.l2_cid;
+ chan->psm = la.l2_psm;
+ chan->dcid = la.l2_cid;
- err = l2cap_do_connect(sk);
+ err = l2cap_chan_connect(l2cap_pi(sk)->chan);
if (err)
goto done;
@@ -244,6 +230,7 @@
static int l2cap_sock_listen(struct socket *sock, int backlog)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
int err = 0;
BT_DBG("sk %p backlog %d", sk, backlog);
@@ -256,7 +243,7 @@
goto done;
}
- switch (l2cap_pi(sk)->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_BASIC:
break;
case L2CAP_MODE_ERTM:
@@ -269,28 +256,6 @@
goto done;
}
- if (!l2cap_pi(sk)->psm && !l2cap_pi(sk)->dcid) {
- bdaddr_t *src = &bt_sk(sk)->src;
- u16 psm;
-
- err = -EINVAL;
-
- write_lock_bh(&l2cap_sk_list.lock);
-
- for (psm = 0x1001; psm < 0x1100; psm += 2)
- if (!__l2cap_get_sock_by_addr(cpu_to_le16(psm), src)) {
- l2cap_pi(sk)->psm = cpu_to_le16(psm);
- l2cap_pi(sk)->sport = cpu_to_le16(psm);
- err = 0;
- break;
- }
-
- write_unlock_bh(&l2cap_sk_list.lock);
-
- if (err < 0)
- goto done;
- }
-
sk->sk_max_ack_backlog = backlog;
sk->sk_ack_backlog = 0;
sk->sk_state = BT_LISTEN;
@@ -360,6 +325,7 @@
{
struct sockaddr_l2 *la = (struct sockaddr_l2 *) addr;
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
BT_DBG("sock %p, sk %p", sock, sk);
@@ -367,13 +333,13 @@
*len = sizeof(struct sockaddr_l2);
if (peer) {
- la->l2_psm = l2cap_pi(sk)->psm;
+ la->l2_psm = chan->psm;
bacpy(&la->l2_bdaddr, &bt_sk(sk)->dst);
- la->l2_cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ la->l2_cid = cpu_to_le16(chan->dcid);
} else {
- la->l2_psm = l2cap_pi(sk)->sport;
+ la->l2_psm = chan->sport;
bacpy(&la->l2_bdaddr, &bt_sk(sk)->src);
- la->l2_cid = cpu_to_le16(l2cap_pi(sk)->scid);
+ la->l2_cid = cpu_to_le16(chan->scid);
}
return 0;
@@ -382,6 +348,7 @@
static int l2cap_sock_getsockopt_old(struct socket *sock, int optname, char __user *optval, int __user *optlen)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct l2cap_options opts;
struct l2cap_conninfo cinfo;
int len, err = 0;
@@ -397,13 +364,13 @@
switch (optname) {
case L2CAP_OPTIONS:
memset(&opts, 0, sizeof(opts));
- opts.imtu = l2cap_pi(sk)->imtu;
- opts.omtu = l2cap_pi(sk)->omtu;
- opts.flush_to = l2cap_pi(sk)->flush_to;
- opts.mode = l2cap_pi(sk)->mode;
- opts.fcs = l2cap_pi(sk)->fcs;
- opts.max_tx = l2cap_pi(sk)->max_tx;
- opts.txwin_size = (__u16)l2cap_pi(sk)->tx_win;
+ opts.imtu = chan->imtu;
+ opts.omtu = chan->omtu;
+ opts.flush_to = chan->flush_to;
+ opts.mode = chan->mode;
+ opts.fcs = chan->fcs;
+ opts.max_tx = chan->max_tx;
+ opts.txwin_size = (__u16)chan->tx_win;
len = min_t(unsigned int, len, sizeof(opts));
if (copy_to_user(optval, (char *) &opts, len))
@@ -412,7 +379,7 @@
break;
case L2CAP_LM:
- switch (l2cap_pi(sk)->sec_level) {
+ switch (chan->sec_level) {
case BT_SECURITY_LOW:
opt = L2CAP_LM_AUTH;
break;
@@ -428,10 +395,10 @@
break;
}
- if (l2cap_pi(sk)->role_switch)
+ if (chan->role_switch)
opt |= L2CAP_LM_MASTER;
- if (l2cap_pi(sk)->force_reliable)
+ if (chan->force_reliable)
opt |= L2CAP_LM_RELIABLE;
if (put_user(opt, (u32 __user *) optval))
@@ -446,8 +413,8 @@
break;
}
- cinfo.hci_handle = l2cap_pi(sk)->conn->hcon->handle;
- memcpy(cinfo.dev_class, l2cap_pi(sk)->conn->hcon->dev_class, 3);
+ cinfo.hci_handle = chan->conn->hcon->handle;
+ memcpy(cinfo.dev_class, chan->conn->hcon->dev_class, 3);
len = min_t(unsigned int, len, sizeof(cinfo));
if (copy_to_user(optval, (char *) &cinfo, len))
@@ -467,6 +434,7 @@
static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct bt_security sec;
int len, err = 0;
@@ -491,7 +459,7 @@
break;
}
- sec.level = l2cap_pi(sk)->sec_level;
+ sec.level = chan->sec_level;
len = min_t(unsigned int, len, sizeof(sec));
if (copy_to_user(optval, (char *) &sec, len))
@@ -511,7 +479,7 @@
break;
case BT_FLUSHABLE:
- if (put_user(l2cap_pi(sk)->flushable, (u32 __user *) optval))
+ if (put_user(chan->flushable, (u32 __user *) optval))
err = -EFAULT;
break;
@@ -528,6 +496,7 @@
static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct l2cap_options opts;
int len, err = 0;
u32 opt;
@@ -543,13 +512,13 @@
break;
}
- opts.imtu = l2cap_pi(sk)->imtu;
- opts.omtu = l2cap_pi(sk)->omtu;
- opts.flush_to = l2cap_pi(sk)->flush_to;
- opts.mode = l2cap_pi(sk)->mode;
- opts.fcs = l2cap_pi(sk)->fcs;
- opts.max_tx = l2cap_pi(sk)->max_tx;
- opts.txwin_size = (__u16)l2cap_pi(sk)->tx_win;
+ opts.imtu = chan->imtu;
+ opts.omtu = chan->omtu;
+ opts.flush_to = chan->flush_to;
+ opts.mode = chan->mode;
+ opts.fcs = chan->fcs;
+ opts.max_tx = chan->max_tx;
+ opts.txwin_size = (__u16)chan->tx_win;
len = min_t(unsigned int, sizeof(opts), optlen);
if (copy_from_user((char *) &opts, optval, len)) {
@@ -562,10 +531,10 @@
break;
}
- l2cap_pi(sk)->mode = opts.mode;
- switch (l2cap_pi(sk)->mode) {
+ chan->mode = opts.mode;
+ switch (chan->mode) {
case L2CAP_MODE_BASIC:
- l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_STATE2_DEVICE;
+ chan->conf_state &= ~L2CAP_CONF_STATE2_DEVICE;
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
@@ -577,11 +546,11 @@
break;
}
- l2cap_pi(sk)->imtu = opts.imtu;
- l2cap_pi(sk)->omtu = opts.omtu;
- l2cap_pi(sk)->fcs = opts.fcs;
- l2cap_pi(sk)->max_tx = opts.max_tx;
- l2cap_pi(sk)->tx_win = (__u8)opts.txwin_size;
+ chan->imtu = opts.imtu;
+ chan->omtu = opts.omtu;
+ chan->fcs = opts.fcs;
+ chan->max_tx = opts.max_tx;
+ chan->tx_win = (__u8)opts.txwin_size;
break;
case L2CAP_LM:
@@ -591,14 +560,14 @@
}
if (opt & L2CAP_LM_AUTH)
- l2cap_pi(sk)->sec_level = BT_SECURITY_LOW;
+ chan->sec_level = BT_SECURITY_LOW;
if (opt & L2CAP_LM_ENCRYPT)
- l2cap_pi(sk)->sec_level = BT_SECURITY_MEDIUM;
+ chan->sec_level = BT_SECURITY_MEDIUM;
if (opt & L2CAP_LM_SECURE)
- l2cap_pi(sk)->sec_level = BT_SECURITY_HIGH;
+ chan->sec_level = BT_SECURITY_HIGH;
- l2cap_pi(sk)->role_switch = (opt & L2CAP_LM_MASTER);
- l2cap_pi(sk)->force_reliable = (opt & L2CAP_LM_RELIABLE);
+ chan->role_switch = (opt & L2CAP_LM_MASTER);
+ chan->force_reliable = (opt & L2CAP_LM_RELIABLE);
break;
default:
@@ -613,6 +582,7 @@
static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct bt_security sec;
int len, err = 0;
u32 opt;
@@ -649,7 +619,7 @@
break;
}
- l2cap_pi(sk)->sec_level = sec.level;
+ chan->sec_level = sec.level;
break;
case BT_DEFER_SETUP:
@@ -678,7 +648,7 @@
}
if (opt == BT_FLUSHABLE_OFF) {
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct l2cap_conn *conn = chan->conn;
/* proceed further only when we have l2cap_conn and
No Flush support in the LM */
if (!conn || !lmp_no_flush_capable(conn->hcon->hdev)) {
@@ -687,7 +657,7 @@
}
}
- l2cap_pi(sk)->flushable = opt;
+ chan->flushable = opt;
break;
default:
@@ -702,7 +672,7 @@
static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
- struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct sk_buff *skb;
u16 control;
int err;
@@ -725,74 +695,77 @@
/* Connectionless channel */
if (sk->sk_type == SOCK_DGRAM) {
- skb = l2cap_create_connless_pdu(sk, msg, len);
+ skb = l2cap_create_connless_pdu(chan, msg, len);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
} else {
- l2cap_do_send(sk, skb);
+ l2cap_do_send(chan, skb);
err = len;
}
goto done;
}
- switch (pi->mode) {
+ switch (chan->mode) {
case L2CAP_MODE_BASIC:
/* Check outgoing MTU */
- if (len > pi->omtu) {
+ if (len > chan->omtu) {
err = -EMSGSIZE;
goto done;
}
/* Create a basic PDU */
- skb = l2cap_create_basic_pdu(sk, msg, len);
+ skb = l2cap_create_basic_pdu(chan, msg, len);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
goto done;
}
- l2cap_do_send(sk, skb);
+ l2cap_do_send(chan, skb);
err = len;
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
/* Entire SDU fits into one PDU */
- if (len <= pi->remote_mps) {
+ if (len <= chan->remote_mps) {
control = L2CAP_SDU_UNSEGMENTED;
- skb = l2cap_create_iframe_pdu(sk, msg, len, control, 0);
+ skb = l2cap_create_iframe_pdu(chan, msg, len, control,
+ 0);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
goto done;
}
- __skb_queue_tail(TX_QUEUE(sk), skb);
+ __skb_queue_tail(&chan->tx_q, skb);
- if (sk->sk_send_head == NULL)
- sk->sk_send_head = skb;
+ if (chan->tx_send_head == NULL)
+ chan->tx_send_head = skb;
} else {
/* Segment SDU into multiples PDUs */
- err = l2cap_sar_segment_sdu(sk, msg, len);
+ err = l2cap_sar_segment_sdu(chan, msg, len);
if (err < 0)
goto done;
}
- if (pi->mode == L2CAP_MODE_STREAMING) {
- l2cap_streaming_send(sk);
- } else {
- if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
- (pi->conn_state & L2CAP_CONN_WAIT_F)) {
- err = len;
- break;
- }
- err = l2cap_ertm_send(sk);
+ if (chan->mode == L2CAP_MODE_STREAMING) {
+ l2cap_streaming_send(chan);
+ err = len;
+ break;
}
+ if ((chan->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
+ (chan->conn_state & L2CAP_CONN_WAIT_F)) {
+ err = len;
+ break;
+ }
+ err = l2cap_ertm_send(chan);
+
if (err >= 0)
err = len;
break;
default:
- BT_DBG("bad state %1.1x", pi->mode);
+ BT_DBG("bad state %1.1x", chan->mode);
err = -EBADFD;
}
@@ -808,29 +781,9 @@
lock_sock(sk);
if (sk->sk_state == BT_CONNECT2 && bt_sk(sk)->defer_setup) {
- struct l2cap_conn_rsp rsp;
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
- u8 buf[128];
-
sk->sk_state = BT_CONFIG;
- rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
- rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
- rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
- rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
- l2cap_send_cmd(l2cap_pi(sk)->conn, l2cap_pi(sk)->ident,
- L2CAP_CONN_RSP, sizeof(rsp), &rsp);
-
- if (l2cap_pi(sk)->conf_state & L2CAP_CONF_REQ_SENT) {
- release_sock(sk);
- return 0;
- }
-
- l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
- l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
- l2cap_build_conf_req(sk, buf), buf);
- l2cap_pi(sk)->num_conf_req++;
-
+ __l2cap_connect_rsp_defer(l2cap_pi(sk)->chan);
release_sock(sk);
return 0;
}
@@ -854,7 +807,8 @@
BT_DBG("sk %p state %d", sk, sk->sk_state);
/* Kill poor orphan */
- bt_sock_unlink(&l2cap_sk_list, sk);
+
+ l2cap_chan_destroy(l2cap_pi(sk)->chan);
sock_set_flag(sk, SOCK_DEAD);
sock_put(sk);
}
@@ -885,7 +839,8 @@
void __l2cap_sock_close(struct sock *sk, int reason)
{
- struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+ struct l2cap_conn *conn = chan->conn;
BT_DBG("sk %p state %d socket %p", sk, sk->sk_state, sk->sk_socket);
@@ -900,9 +855,9 @@
sk->sk_type == SOCK_STREAM) &&
conn->hcon->type == ACL_LINK) {
l2cap_sock_set_timer(sk, sk->sk_sndtimeo);
- l2cap_send_disconn_req(conn, sk, reason);
+ l2cap_send_disconn_req(conn, chan, reason);
} else
- l2cap_chan_del(sk, reason);
+ l2cap_chan_del(chan, reason);
break;
case BT_CONNECT2:
@@ -917,20 +872,20 @@
else
result = L2CAP_CR_BAD_PSM;
- rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
- rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
+ rsp.scid = cpu_to_le16(chan->dcid);
+ rsp.dcid = cpu_to_le16(chan->scid);
rsp.result = cpu_to_le16(result);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
- l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
- L2CAP_CONN_RSP, sizeof(rsp), &rsp);
+ l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
+ sizeof(rsp), &rsp);
}
- l2cap_chan_del(sk, reason);
+ l2cap_chan_del(chan, reason);
break;
case BT_CONNECT:
case BT_DISCONN:
- l2cap_chan_del(sk, reason);
+ l2cap_chan_del(chan, reason);
break;
default:
@@ -942,6 +897,7 @@
static int l2cap_sock_shutdown(struct socket *sock, int how)
{
struct sock *sk = sock->sk;
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
int err = 0;
BT_DBG("sock %p, sk %p", sock, sk);
@@ -951,7 +907,7 @@
lock_sock(sk);
if (!sk->sk_shutdown) {
- if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM)
+ if (chan->mode == L2CAP_MODE_ERTM)
err = __l2cap_wait_ack(sk);
sk->sk_shutdown = SHUTDOWN_MASK;
@@ -998,49 +954,47 @@
void l2cap_sock_init(struct sock *sk, struct sock *parent)
{
struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct l2cap_chan *chan = pi->chan;
BT_DBG("sk %p", sk);
if (parent) {
+ struct l2cap_chan *pchan = l2cap_pi(parent)->chan;
+
sk->sk_type = parent->sk_type;
bt_sk(sk)->defer_setup = bt_sk(parent)->defer_setup;
- pi->imtu = l2cap_pi(parent)->imtu;
- pi->omtu = l2cap_pi(parent)->omtu;
- pi->conf_state = l2cap_pi(parent)->conf_state;
- pi->mode = l2cap_pi(parent)->mode;
- pi->fcs = l2cap_pi(parent)->fcs;
- pi->max_tx = l2cap_pi(parent)->max_tx;
- pi->tx_win = l2cap_pi(parent)->tx_win;
- pi->sec_level = l2cap_pi(parent)->sec_level;
- pi->role_switch = l2cap_pi(parent)->role_switch;
- pi->force_reliable = l2cap_pi(parent)->force_reliable;
- pi->flushable = l2cap_pi(parent)->flushable;
+ chan->imtu = pchan->imtu;
+ chan->omtu = pchan->omtu;
+ chan->conf_state = pchan->conf_state;
+ chan->mode = pchan->mode;
+ chan->fcs = pchan->fcs;
+ chan->max_tx = pchan->max_tx;
+ chan->tx_win = pchan->tx_win;
+ chan->sec_level = pchan->sec_level;
+ chan->role_switch = pchan->role_switch;
+ chan->force_reliable = pchan->force_reliable;
+ chan->flushable = pchan->flushable;
} else {
- pi->imtu = L2CAP_DEFAULT_MTU;
- pi->omtu = 0;
+ chan->imtu = L2CAP_DEFAULT_MTU;
+ chan->omtu = 0;
if (!disable_ertm && sk->sk_type == SOCK_STREAM) {
- pi->mode = L2CAP_MODE_ERTM;
- pi->conf_state |= L2CAP_CONF_STATE2_DEVICE;
+ chan->mode = L2CAP_MODE_ERTM;
+ chan->conf_state |= L2CAP_CONF_STATE2_DEVICE;
} else {
- pi->mode = L2CAP_MODE_BASIC;
+ chan->mode = L2CAP_MODE_BASIC;
}
- pi->max_tx = L2CAP_DEFAULT_MAX_TX;
- pi->fcs = L2CAP_FCS_CRC16;
- pi->tx_win = L2CAP_DEFAULT_TX_WINDOW;
- pi->sec_level = BT_SECURITY_LOW;
- pi->role_switch = 0;
- pi->force_reliable = 0;
- pi->flushable = BT_FLUSHABLE_OFF;
+ chan->max_tx = L2CAP_DEFAULT_MAX_TX;
+ chan->fcs = L2CAP_FCS_CRC16;
+ chan->tx_win = L2CAP_DEFAULT_TX_WINDOW;
+ chan->sec_level = BT_SECURITY_LOW;
+ chan->role_switch = 0;
+ chan->force_reliable = 0;
+ chan->flushable = BT_FLUSHABLE_OFF;
}
/* Default config options */
- pi->conf_len = 0;
- pi->flush_to = L2CAP_DEFAULT_FLUSH_TO;
- skb_queue_head_init(TX_QUEUE(sk));
- skb_queue_head_init(SREJ_QUEUE(sk));
- skb_queue_head_init(BUSY_QUEUE(sk));
- INIT_LIST_HEAD(SREJ_LIST(sk));
+ chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
}
static struct proto l2cap_proto = {
@@ -1070,7 +1024,6 @@
setup_timer(&sk->sk_timer, l2cap_sock_timeout, (unsigned long) sk);
- bt_sock_link(&l2cap_sk_list, sk);
return sk;
}
@@ -1078,6 +1031,7 @@
int kern)
{
struct sock *sk;
+ struct l2cap_chan *chan;
BT_DBG("sock %p", sock);
@@ -1096,11 +1050,19 @@
if (!sk)
return -ENOMEM;
+ chan = l2cap_chan_create(sk);
+ if (!chan) {
+ l2cap_sock_kill(sk);
+ return -ENOMEM;
+ }
+
+ l2cap_pi(sk)->chan = chan;
+
l2cap_sock_init(sk, NULL);
return 0;
}
-const struct proto_ops l2cap_sock_ops = {
+static const struct proto_ops l2cap_sock_ops = {
.family = PF_BLUETOOTH,
.owner = THIS_MODULE,
.release = l2cap_sock_release,
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 4476d8e..dae382c 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -36,7 +36,7 @@
struct list_head list;
__u16 opcode;
int index;
- void *cmd;
+ void *param;
struct sock *sk;
void *user_data;
};
@@ -179,10 +179,12 @@
hci_del_off_timer(hdev);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
set_bit(HCI_MGMT, &hdev->flags);
+ memset(&rp, 0, sizeof(rp));
+
rp.type = hdev->dev_type;
rp.powered = test_bit(HCI_UP, &hdev->flags);
@@ -204,7 +206,9 @@
rp.hci_ver = hdev->hci_ver;
put_unaligned_le16(hdev->hci_rev, &rp.hci_rev);
- hci_dev_unlock_bh(hdev);
+ memcpy(rp.name, hdev->dev_name, sizeof(hdev->dev_name));
+
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return cmd_complete(sk, index, MGMT_OP_READ_INFO, &rp, sizeof(rp));
@@ -213,7 +217,7 @@
static void mgmt_pending_free(struct pending_cmd *cmd)
{
sock_put(cmd->sk);
- kfree(cmd->cmd);
+ kfree(cmd->param);
kfree(cmd);
}
@@ -229,13 +233,14 @@
cmd->opcode = opcode;
cmd->index = index;
- cmd->cmd = kmalloc(len, GFP_ATOMIC);
- if (!cmd->cmd) {
+ cmd->param = kmalloc(len, GFP_ATOMIC);
+ if (!cmd->param) {
kfree(cmd);
return NULL;
}
- memcpy(cmd->cmd, data, len);
+ if (data)
+ memcpy(cmd->param, data, len);
cmd->sk = sk;
sock_hold(sk);
@@ -311,7 +316,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_POWERED, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
up = test_bit(HCI_UP, &hdev->flags);
if ((cp->val && up) || (!cp->val && !up)) {
@@ -338,7 +343,7 @@
err = 0;
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
}
@@ -363,7 +368,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_DISCOVERABLE, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (!test_bit(HCI_UP, &hdev->flags)) {
err = cmd_status(sk, index, MGMT_OP_SET_DISCOVERABLE, ENETDOWN);
@@ -398,7 +403,7 @@
mgmt_pending_remove(cmd);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -424,7 +429,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_CONNECTABLE, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (!test_bit(HCI_UP, &hdev->flags)) {
err = cmd_status(sk, index, MGMT_OP_SET_CONNECTABLE, ENETDOWN);
@@ -458,7 +463,7 @@
mgmt_pending_remove(cmd);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -517,7 +522,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_PAIRABLE, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (cp->val)
set_bit(HCI_PAIRABLE, &hdev->flags);
@@ -533,12 +538,156 @@
err = mgmt_event(MGMT_EV_PAIRABLE, index, &ev, sizeof(ev), sk);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
}
+#define EIR_FLAGS 0x01 /* flags */
+#define EIR_UUID16_SOME 0x02 /* 16-bit UUID, more available */
+#define EIR_UUID16_ALL 0x03 /* 16-bit UUID, all listed */
+#define EIR_UUID32_SOME 0x04 /* 32-bit UUID, more available */
+#define EIR_UUID32_ALL 0x05 /* 32-bit UUID, all listed */
+#define EIR_UUID128_SOME 0x06 /* 128-bit UUID, more available */
+#define EIR_UUID128_ALL 0x07 /* 128-bit UUID, all listed */
+#define EIR_NAME_SHORT 0x08 /* shortened local name */
+#define EIR_NAME_COMPLETE 0x09 /* complete local name */
+#define EIR_TX_POWER 0x0A /* transmit power level */
+#define EIR_DEVICE_ID 0x10 /* device ID */
+
+#define PNP_INFO_SVCLASS_ID 0x1200
+
+static u8 bluetooth_base_uuid[] = {
+ 0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80,
+ 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static u16 get_uuid16(u8 *uuid128)
+{
+ u32 val;
+ int i;
+
+ for (i = 0; i < 12; i++) {
+ if (bluetooth_base_uuid[i] != uuid128[i])
+ return 0;
+ }
+
+ memcpy(&val, &uuid128[12], 4);
+
+ val = le32_to_cpu(val);
+ if (val > 0xffff)
+ return 0;
+
+ return (u16) val;
+}
+
+static void create_eir(struct hci_dev *hdev, u8 *data)
+{
+ u8 *ptr = data;
+ u16 eir_len = 0;
+ u16 uuid16_list[HCI_MAX_EIR_LENGTH / sizeof(u16)];
+ int i, truncated = 0;
+ struct list_head *p;
+ size_t name_len;
+
+ name_len = strlen(hdev->dev_name);
+
+ if (name_len > 0) {
+ /* EIR Data type */
+ if (name_len > 48) {
+ name_len = 48;
+ ptr[1] = EIR_NAME_SHORT;
+ } else
+ ptr[1] = EIR_NAME_COMPLETE;
+
+ /* EIR Data length */
+ ptr[0] = name_len + 1;
+
+ memcpy(ptr + 2, hdev->dev_name, name_len);
+
+ eir_len += (name_len + 2);
+ ptr += (name_len + 2);
+ }
+
+ memset(uuid16_list, 0, sizeof(uuid16_list));
+
+ /* Group all UUID16 types */
+ list_for_each(p, &hdev->uuids) {
+ struct bt_uuid *uuid = list_entry(p, struct bt_uuid, list);
+ u16 uuid16;
+
+ uuid16 = get_uuid16(uuid->uuid);
+ if (uuid16 == 0)
+ return;
+
+ if (uuid16 < 0x1100)
+ continue;
+
+ if (uuid16 == PNP_INFO_SVCLASS_ID)
+ continue;
+
+ /* Stop if not enough space to put next UUID */
+ if (eir_len + 2 + sizeof(u16) > HCI_MAX_EIR_LENGTH) {
+ truncated = 1;
+ break;
+ }
+
+ /* Check for duplicates */
+ for (i = 0; uuid16_list[i] != 0; i++)
+ if (uuid16_list[i] == uuid16)
+ break;
+
+ if (uuid16_list[i] == 0) {
+ uuid16_list[i] = uuid16;
+ eir_len += sizeof(u16);
+ }
+ }
+
+ if (uuid16_list[0] != 0) {
+ u8 *length = ptr;
+
+ /* EIR Data type */
+ ptr[1] = truncated ? EIR_UUID16_SOME : EIR_UUID16_ALL;
+
+ ptr += 2;
+ eir_len += 2;
+
+ for (i = 0; uuid16_list[i] != 0; i++) {
+ *ptr++ = (uuid16_list[i] & 0x00ff);
+ *ptr++ = (uuid16_list[i] & 0xff00) >> 8;
+ }
+
+ /* EIR Data length */
+ *length = (i * sizeof(u16)) + 1;
+ }
+}
+
+static int update_eir(struct hci_dev *hdev)
+{
+ struct hci_cp_write_eir cp;
+
+ if (!(hdev->features[6] & LMP_EXT_INQ))
+ return 0;
+
+ if (hdev->ssp_mode == 0)
+ return 0;
+
+ if (test_bit(HCI_SERVICE_CACHE, &hdev->flags))
+ return 0;
+
+ memset(&cp, 0, sizeof(cp));
+
+ create_eir(hdev, cp.data);
+
+ if (memcmp(cp.data, hdev->eir, sizeof(cp.data)) == 0)
+ return 0;
+
+ memcpy(hdev->eir, cp.data, sizeof(cp.data));
+
+ return hci_send_cmd(hdev, HCI_OP_WRITE_EIR, sizeof(cp), &cp);
+}
+
static u8 get_service_classes(struct hci_dev *hdev)
{
struct list_head *p;
@@ -590,7 +739,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_ADD_UUID, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
uuid = kmalloc(sizeof(*uuid), GFP_ATOMIC);
if (!uuid) {
@@ -607,10 +756,14 @@
if (err < 0)
goto failed;
+ err = update_eir(hdev);
+ if (err < 0)
+ goto failed;
+
err = cmd_complete(sk, index, MGMT_OP_ADD_UUID, NULL, 0);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -635,7 +788,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_REMOVE_UUID, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (memcmp(cp->uuid, bt_uuid_any, 16) == 0) {
err = hci_uuids_clear(hdev);
@@ -663,10 +816,14 @@
if (err < 0)
goto unlock;
+ err = update_eir(hdev);
+ if (err < 0)
+ goto unlock;
+
err = cmd_complete(sk, index, MGMT_OP_REMOVE_UUID, NULL, 0);
unlock:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -690,7 +847,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_DEV_CLASS, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
hdev->major_class = cp->major;
hdev->minor_class = cp->minor;
@@ -700,7 +857,7 @@
if (err == 0)
err = cmd_complete(sk, index, MGMT_OP_SET_DEV_CLASS, NULL, 0);
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -722,7 +879,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_SERVICE_CACHE, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
BT_DBG("hci%u enable %d", index, cp->enable);
@@ -732,13 +889,15 @@
} else {
clear_bit(HCI_SERVICE_CACHE, &hdev->flags);
err = update_class(hdev);
+ if (err == 0)
+ err = update_eir(hdev);
}
if (err == 0)
err = cmd_complete(sk, index, MGMT_OP_SET_SERVICE_CACHE, NULL,
0);
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -772,7 +931,7 @@
BT_DBG("hci%u debug_keys %u key_count %u", index, cp->debug_keys,
key_count);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
hci_link_keys_clear(hdev);
@@ -786,11 +945,11 @@
for (i = 0; i < key_count; i++) {
struct mgmt_key_info *key = &cp->keys[i];
- hci_add_link_key(hdev, 0, &key->bdaddr, key->val, key->type,
+ hci_add_link_key(hdev, NULL, 0, &key->bdaddr, key->val, key->type,
key->pin_len);
}
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return 0;
@@ -812,7 +971,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_REMOVE_KEY, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
err = hci_remove_link_key(hdev, &cp->bdaddr);
if (err < 0) {
@@ -835,7 +994,7 @@
}
unlock:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -861,7 +1020,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_DISCONNECT, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (!test_bit(HCI_UP, &hdev->flags)) {
err = cmd_status(sk, index, MGMT_OP_DISCONNECT, ENETDOWN);
@@ -874,6 +1033,9 @@
}
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
+ if (!conn)
+ conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->bdaddr);
+
if (!conn) {
err = cmd_status(sk, index, MGMT_OP_DISCONNECT, ENOTCONN);
goto failed;
@@ -893,7 +1055,7 @@
mgmt_pending_remove(cmd);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -914,7 +1076,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_GET_CONNECTIONS, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
count = 0;
list_for_each(p, &hdev->conn_hash.list) {
@@ -945,7 +1107,7 @@
unlock:
kfree(rp);
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
}
@@ -970,7 +1132,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_PIN_CODE_REPLY, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (!test_bit(HCI_UP, &hdev->flags)) {
err = cmd_status(sk, index, MGMT_OP_PIN_CODE_REPLY, ENETDOWN);
@@ -992,7 +1154,7 @@
mgmt_pending_remove(cmd);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -1019,7 +1181,7 @@
return cmd_status(sk, index, MGMT_OP_PIN_CODE_NEG_REPLY,
ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (!test_bit(HCI_UP, &hdev->flags)) {
err = cmd_status(sk, index, MGMT_OP_PIN_CODE_NEG_REPLY,
@@ -1040,7 +1202,7 @@
mgmt_pending_remove(cmd);
failed:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -1063,14 +1225,14 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_SET_IO_CAPABILITY, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
hdev->io_capability = cp->io_capability;
BT_DBG("%s IO capability set to 0x%02x", hdev->name,
hdev->io_capability);
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return cmd_complete(sk, index, MGMT_OP_SET_IO_CAPABILITY, NULL, 0);
@@ -1156,7 +1318,7 @@
if (!hdev)
return cmd_status(sk, index, MGMT_OP_PAIR_DEVICE, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (cp->io_cap == 0x03) {
sec_level = BT_SECURITY_MEDIUM;
@@ -1198,7 +1360,7 @@
err = 0;
unlock:
- hci_dev_unlock_bh(hdev);
+ hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
@@ -1230,7 +1392,7 @@
if (!hdev)
return cmd_status(sk, index, mgmt_op, ENODEV);
- hci_dev_lock_bh(hdev);
+ hci_dev_lock(hdev);
if (!test_bit(HCI_UP, &hdev->flags)) {
err = cmd_status(sk, index, mgmt_op, ENETDOWN);
@@ -1248,6 +1410,231 @@
mgmt_pending_remove(cmd);
failed:
+ hci_dev_unlock(hdev);
+ hci_dev_put(hdev);
+
+ return err;
+}
+
+static int set_local_name(struct sock *sk, u16 index, unsigned char *data,
+ u16 len)
+{
+ struct mgmt_cp_set_local_name *mgmt_cp = (void *) data;
+ struct hci_cp_write_local_name hci_cp;
+ struct hci_dev *hdev;
+ struct pending_cmd *cmd;
+ int err;
+
+ BT_DBG("");
+
+ if (len != sizeof(*mgmt_cp))
+ return cmd_status(sk, index, MGMT_OP_SET_LOCAL_NAME, EINVAL);
+
+ hdev = hci_dev_get(index);
+ if (!hdev)
+ return cmd_status(sk, index, MGMT_OP_SET_LOCAL_NAME, ENODEV);
+
+ hci_dev_lock(hdev);
+
+ cmd = mgmt_pending_add(sk, MGMT_OP_SET_LOCAL_NAME, index, data, len);
+ if (!cmd) {
+ err = -ENOMEM;
+ goto failed;
+ }
+
+ memcpy(hci_cp.name, mgmt_cp->name, sizeof(hci_cp.name));
+ err = hci_send_cmd(hdev, HCI_OP_WRITE_LOCAL_NAME, sizeof(hci_cp),
+ &hci_cp);
+ if (err < 0)
+ mgmt_pending_remove(cmd);
+
+failed:
+ hci_dev_unlock(hdev);
+ hci_dev_put(hdev);
+
+ return err;
+}
+
+static int read_local_oob_data(struct sock *sk, u16 index)
+{
+ struct hci_dev *hdev;
+ struct pending_cmd *cmd;
+ int err;
+
+ BT_DBG("hci%u", index);
+
+ hdev = hci_dev_get(index);
+ if (!hdev)
+ return cmd_status(sk, index, MGMT_OP_READ_LOCAL_OOB_DATA,
+ ENODEV);
+
+ hci_dev_lock(hdev);
+
+ if (!test_bit(HCI_UP, &hdev->flags)) {
+ err = cmd_status(sk, index, MGMT_OP_READ_LOCAL_OOB_DATA,
+ ENETDOWN);
+ goto unlock;
+ }
+
+ if (!(hdev->features[6] & LMP_SIMPLE_PAIR)) {
+ err = cmd_status(sk, index, MGMT_OP_READ_LOCAL_OOB_DATA,
+ EOPNOTSUPP);
+ goto unlock;
+ }
+
+ if (mgmt_pending_find(MGMT_OP_READ_LOCAL_OOB_DATA, index)) {
+ err = cmd_status(sk, index, MGMT_OP_READ_LOCAL_OOB_DATA, EBUSY);
+ goto unlock;
+ }
+
+ cmd = mgmt_pending_add(sk, MGMT_OP_READ_LOCAL_OOB_DATA, index, NULL, 0);
+ if (!cmd) {
+ err = -ENOMEM;
+ goto unlock;
+ }
+
+ err = hci_send_cmd(hdev, HCI_OP_READ_LOCAL_OOB_DATA, 0, NULL);
+ if (err < 0)
+ mgmt_pending_remove(cmd);
+
+unlock:
+ hci_dev_unlock(hdev);
+ hci_dev_put(hdev);
+
+ return err;
+}
+
+static int add_remote_oob_data(struct sock *sk, u16 index, unsigned char *data,
+ u16 len)
+{
+ struct hci_dev *hdev;
+ struct mgmt_cp_add_remote_oob_data *cp = (void *) data;
+ int err;
+
+ BT_DBG("hci%u ", index);
+
+ if (len != sizeof(*cp))
+ return cmd_status(sk, index, MGMT_OP_ADD_REMOTE_OOB_DATA,
+ EINVAL);
+
+ hdev = hci_dev_get(index);
+ if (!hdev)
+ return cmd_status(sk, index, MGMT_OP_ADD_REMOTE_OOB_DATA,
+ ENODEV);
+
+ hci_dev_lock(hdev);
+
+ err = hci_add_remote_oob_data(hdev, &cp->bdaddr, cp->hash,
+ cp->randomizer);
+ if (err < 0)
+ err = cmd_status(sk, index, MGMT_OP_ADD_REMOTE_OOB_DATA, -err);
+ else
+ err = cmd_complete(sk, index, MGMT_OP_ADD_REMOTE_OOB_DATA, NULL,
+ 0);
+
+ hci_dev_unlock(hdev);
+ hci_dev_put(hdev);
+
+ return err;
+}
+
+static int remove_remote_oob_data(struct sock *sk, u16 index,
+ unsigned char *data, u16 len)
+{
+ struct hci_dev *hdev;
+ struct mgmt_cp_remove_remote_oob_data *cp = (void *) data;
+ int err;
+
+ BT_DBG("hci%u ", index);
+
+ if (len != sizeof(*cp))
+ return cmd_status(sk, index, MGMT_OP_REMOVE_REMOTE_OOB_DATA,
+ EINVAL);
+
+ hdev = hci_dev_get(index);
+ if (!hdev)
+ return cmd_status(sk, index, MGMT_OP_REMOVE_REMOTE_OOB_DATA,
+ ENODEV);
+
+ hci_dev_lock(hdev);
+
+ err = hci_remove_remote_oob_data(hdev, &cp->bdaddr);
+ if (err < 0)
+ err = cmd_status(sk, index, MGMT_OP_REMOVE_REMOTE_OOB_DATA,
+ -err);
+ else
+ err = cmd_complete(sk, index, MGMT_OP_REMOVE_REMOTE_OOB_DATA,
+ NULL, 0);
+
+ hci_dev_unlock(hdev);
+ hci_dev_put(hdev);
+
+ return err;
+}
+
+static int start_discovery(struct sock *sk, u16 index)
+{
+ u8 lap[3] = { 0x33, 0x8b, 0x9e };
+ struct hci_cp_inquiry cp;
+ struct pending_cmd *cmd;
+ struct hci_dev *hdev;
+ int err;
+
+ BT_DBG("hci%u", index);
+
+ hdev = hci_dev_get(index);
+ if (!hdev)
+ return cmd_status(sk, index, MGMT_OP_START_DISCOVERY, ENODEV);
+
+ hci_dev_lock_bh(hdev);
+
+ cmd = mgmt_pending_add(sk, MGMT_OP_START_DISCOVERY, index, NULL, 0);
+ if (!cmd) {
+ err = -ENOMEM;
+ goto failed;
+ }
+
+ memset(&cp, 0, sizeof(cp));
+ memcpy(&cp.lap, lap, 3);
+ cp.length = 0x08;
+ cp.num_rsp = 0x00;
+
+ err = hci_send_cmd(hdev, HCI_OP_INQUIRY, sizeof(cp), &cp);
+ if (err < 0)
+ mgmt_pending_remove(cmd);
+
+failed:
+ hci_dev_unlock_bh(hdev);
+ hci_dev_put(hdev);
+
+ return err;
+}
+
+static int stop_discovery(struct sock *sk, u16 index)
+{
+ struct hci_dev *hdev;
+ struct pending_cmd *cmd;
+ int err;
+
+ BT_DBG("hci%u", index);
+
+ hdev = hci_dev_get(index);
+ if (!hdev)
+ return cmd_status(sk, index, MGMT_OP_STOP_DISCOVERY, ENODEV);
+
+ hci_dev_lock_bh(hdev);
+
+ cmd = mgmt_pending_add(sk, MGMT_OP_STOP_DISCOVERY, index, NULL, 0);
+ if (!cmd) {
+ err = -ENOMEM;
+ goto failed;
+ }
+
+ err = hci_send_cmd(hdev, HCI_OP_INQUIRY_CANCEL, 0, NULL);
+ if (err < 0)
+ mgmt_pending_remove(cmd);
+
+failed:
hci_dev_unlock_bh(hdev);
hci_dev_put(hdev);
@@ -1266,7 +1653,7 @@
if (msglen < sizeof(*hdr))
return -EINVAL;
- buf = kmalloc(msglen, GFP_ATOMIC);
+ buf = kmalloc(msglen, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -1349,6 +1736,25 @@
case MGMT_OP_USER_CONFIRM_NEG_REPLY:
err = user_confirm_reply(sk, index, buf + sizeof(*hdr), len, 0);
break;
+ case MGMT_OP_SET_LOCAL_NAME:
+ err = set_local_name(sk, index, buf + sizeof(*hdr), len);
+ break;
+ case MGMT_OP_READ_LOCAL_OOB_DATA:
+ err = read_local_oob_data(sk, index);
+ break;
+ case MGMT_OP_ADD_REMOTE_OOB_DATA:
+ err = add_remote_oob_data(sk, index, buf + sizeof(*hdr), len);
+ break;
+ case MGMT_OP_REMOVE_REMOTE_OOB_DATA:
+ err = remove_remote_oob_data(sk, index, buf + sizeof(*hdr),
+ len);
+ break;
+ case MGMT_OP_START_DISCOVERY:
+ err = start_discovery(sk, index);
+ break;
+ case MGMT_OP_STOP_DISCOVERY:
+ err = stop_discovery(sk, index);
+ break;
default:
BT_DBG("Unknown op %u", opcode);
err = cmd_status(sk, index, opcode, 0x01);
@@ -1382,7 +1788,7 @@
static void mode_rsp(struct pending_cmd *cmd, void *data)
{
- struct mgmt_mode *cp = cmd->cmd;
+ struct mgmt_mode *cp = cmd->param;
struct cmd_lookup *match = data;
if (cp->val != match->val)
@@ -1455,17 +1861,17 @@
return ret;
}
-int mgmt_new_key(u16 index, struct link_key *key, u8 old_key_type)
+int mgmt_new_key(u16 index, struct link_key *key, u8 persistent)
{
struct mgmt_ev_new_key ev;
memset(&ev, 0, sizeof(ev));
+ ev.store_hint = persistent;
bacpy(&ev.key.bdaddr, &key->bdaddr);
ev.key.type = key->type;
memcpy(ev.key.val, key->val, 16);
ev.key.pin_len = key->pin_len;
- ev.old_key_type = old_key_type;
return mgmt_event(MGMT_EV_NEW_KEY, index, &ev, sizeof(ev), NULL);
}
@@ -1481,7 +1887,7 @@
static void disconnect_rsp(struct pending_cmd *cmd, void *data)
{
- struct mgmt_cp_disconnect *cp = cmd->cmd;
+ struct mgmt_cp_disconnect *cp = cmd->param;
struct sock **sk = data;
struct mgmt_rp_disconnect rp;
@@ -1539,11 +1945,12 @@
return mgmt_event(MGMT_EV_CONNECT_FAILED, index, &ev, sizeof(ev), NULL);
}
-int mgmt_pin_code_request(u16 index, bdaddr_t *bdaddr)
+int mgmt_pin_code_request(u16 index, bdaddr_t *bdaddr, u8 secure)
{
struct mgmt_ev_pin_code_request ev;
bacpy(&ev.bdaddr, bdaddr);
+ ev.secure = secure;
return mgmt_event(MGMT_EV_PIN_CODE_REQUEST, index, &ev, sizeof(ev),
NULL);
@@ -1591,13 +1998,15 @@
return err;
}
-int mgmt_user_confirm_request(u16 index, bdaddr_t *bdaddr, __le32 value)
+int mgmt_user_confirm_request(u16 index, bdaddr_t *bdaddr, __le32 value,
+ u8 confirm_hint)
{
struct mgmt_ev_user_confirm_request ev;
BT_DBG("hci%u", index);
bacpy(&ev.bdaddr, bdaddr);
+ ev.confirm_hint = confirm_hint;
put_unaligned_le32(value, &ev.value);
return mgmt_event(MGMT_EV_USER_CONFIRM_REQUEST, index, &ev, sizeof(ev),
@@ -1645,3 +2054,110 @@
return mgmt_event(MGMT_EV_AUTH_FAILED, index, &ev, sizeof(ev), NULL);
}
+
+int mgmt_set_local_name_complete(u16 index, u8 *name, u8 status)
+{
+ struct pending_cmd *cmd;
+ struct hci_dev *hdev;
+ struct mgmt_cp_set_local_name ev;
+ int err;
+
+ memset(&ev, 0, sizeof(ev));
+ memcpy(ev.name, name, HCI_MAX_NAME_LENGTH);
+
+ cmd = mgmt_pending_find(MGMT_OP_SET_LOCAL_NAME, index);
+ if (!cmd)
+ goto send_event;
+
+ if (status) {
+ err = cmd_status(cmd->sk, index, MGMT_OP_SET_LOCAL_NAME, EIO);
+ goto failed;
+ }
+
+ hdev = hci_dev_get(index);
+ if (hdev) {
+ hci_dev_lock_bh(hdev);
+ update_eir(hdev);
+ hci_dev_unlock_bh(hdev);
+ hci_dev_put(hdev);
+ }
+
+ err = cmd_complete(cmd->sk, index, MGMT_OP_SET_LOCAL_NAME, &ev,
+ sizeof(ev));
+ if (err < 0)
+ goto failed;
+
+send_event:
+ err = mgmt_event(MGMT_EV_LOCAL_NAME_CHANGED, index, &ev, sizeof(ev),
+ cmd ? cmd->sk : NULL);
+
+failed:
+ if (cmd)
+ mgmt_pending_remove(cmd);
+ return err;
+}
+
+int mgmt_read_local_oob_data_reply_complete(u16 index, u8 *hash, u8 *randomizer,
+ u8 status)
+{
+ struct pending_cmd *cmd;
+ int err;
+
+ BT_DBG("hci%u status %u", index, status);
+
+ cmd = mgmt_pending_find(MGMT_OP_READ_LOCAL_OOB_DATA, index);
+ if (!cmd)
+ return -ENOENT;
+
+ if (status) {
+ err = cmd_status(cmd->sk, index, MGMT_OP_READ_LOCAL_OOB_DATA,
+ EIO);
+ } else {
+ struct mgmt_rp_read_local_oob_data rp;
+
+ memcpy(rp.hash, hash, sizeof(rp.hash));
+ memcpy(rp.randomizer, randomizer, sizeof(rp.randomizer));
+
+ err = cmd_complete(cmd->sk, index, MGMT_OP_READ_LOCAL_OOB_DATA,
+ &rp, sizeof(rp));
+ }
+
+ mgmt_pending_remove(cmd);
+
+ return err;
+}
+
+int mgmt_device_found(u16 index, bdaddr_t *bdaddr, u8 *dev_class, s8 rssi,
+ u8 *eir)
+{
+ struct mgmt_ev_device_found ev;
+
+ memset(&ev, 0, sizeof(ev));
+
+ bacpy(&ev.bdaddr, bdaddr);
+ memcpy(ev.dev_class, dev_class, sizeof(ev.dev_class));
+ ev.rssi = rssi;
+
+ if (eir)
+ memcpy(ev.eir, eir, sizeof(ev.eir));
+
+ return mgmt_event(MGMT_EV_DEVICE_FOUND, index, &ev, sizeof(ev), NULL);
+}
+
+int mgmt_remote_name(u16 index, bdaddr_t *bdaddr, u8 *name)
+{
+ struct mgmt_ev_remote_name ev;
+
+ memset(&ev, 0, sizeof(ev));
+
+ bacpy(&ev.bdaddr, bdaddr);
+ memcpy(ev.name, name, HCI_MAX_NAME_LENGTH);
+
+ return mgmt_event(MGMT_EV_REMOTE_NAME, index, &ev, sizeof(ev), NULL);
+}
+
+int mgmt_discovering(u16 index, u8 discovering)
+{
+ return mgmt_event(MGMT_EV_DISCOVERING, index, &discovering,
+ sizeof(discovering), NULL);
+}
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index c997393..5759bb7 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -232,6 +232,8 @@
static inline int rfcomm_check_security(struct rfcomm_dlc *d)
{
struct sock *sk = d->session->sock->sk;
+ struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;
+
__u8 auth_type;
switch (d->sec_level) {
@@ -246,8 +248,7 @@
break;
}
- return hci_conn_security(l2cap_pi(sk)->conn->hcon, d->sec_level,
- auth_type);
+ return hci_conn_security(conn->hcon, d->sec_level, auth_type);
}
static void rfcomm_session_timeout(unsigned long arg)
@@ -710,10 +711,10 @@
/* Set L2CAP options */
sk = sock->sk;
lock_sock(sk);
- l2cap_pi(sk)->imtu = l2cap_mtu;
- l2cap_pi(sk)->sec_level = sec_level;
+ l2cap_pi(sk)->chan->imtu = l2cap_mtu;
+ l2cap_pi(sk)->chan->sec_level = sec_level;
if (l2cap_ertm)
- l2cap_pi(sk)->mode = L2CAP_MODE_ERTM;
+ l2cap_pi(sk)->chan->mode = L2CAP_MODE_ERTM;
release_sock(sk);
s = rfcomm_session_add(sock, BT_BOUND);
@@ -1241,6 +1242,7 @@
void rfcomm_dlc_accept(struct rfcomm_dlc *d)
{
struct sock *sk = d->session->sock->sk;
+ struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;
BT_DBG("dlc %p", d);
@@ -1254,7 +1256,7 @@
rfcomm_dlc_unlock(d);
if (d->role_switch)
- hci_conn_switch_role(l2cap_pi(sk)->conn->hcon, 0x00);
+ hci_conn_switch_role(conn->hcon, 0x00);
rfcomm_send_msc(d->session, 1, d->dlci, d->v24_sig);
}
@@ -1890,7 +1892,8 @@
/* We should adjust MTU on incoming sessions.
* L2CAP MTU minus UIH header and FCS. */
- s->mtu = min(l2cap_pi(nsock->sk)->omtu, l2cap_pi(nsock->sk)->imtu) - 5;
+ s->mtu = min(l2cap_pi(nsock->sk)->chan->omtu,
+ l2cap_pi(nsock->sk)->chan->imtu) - 5;
rfcomm_schedule();
} else
@@ -1909,7 +1912,7 @@
/* We can adjust MTU on outgoing sessions.
* L2CAP MTU minus UIH header and FCS. */
- s->mtu = min(l2cap_pi(sk)->omtu, l2cap_pi(sk)->imtu) - 5;
+ s->mtu = min(l2cap_pi(sk)->chan->omtu, l2cap_pi(sk)->chan->imtu) - 5;
rfcomm_send_sabm(s, 0);
break;
@@ -1992,7 +1995,7 @@
/* Set L2CAP options */
sk = sock->sk;
lock_sock(sk);
- l2cap_pi(sk)->imtu = l2cap_mtu;
+ l2cap_pi(sk)->chan->imtu = l2cap_mtu;
release_sock(sk);
/* Start listening on the socket */
@@ -2093,7 +2096,7 @@
if (!test_and_clear_bit(RFCOMM_AUTH_PENDING, &d->flags))
continue;
- if (!status)
+ if (!status && hci_conn_check_secure(conn, d->sec_level))
set_bit(RFCOMM_AUTH_ACCEPT, &d->flags);
else
set_bit(RFCOMM_AUTH_REJECT, &d->flags);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 66cc1f0..386cfaf 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -743,6 +743,7 @@
struct sock *sk = sock->sk;
struct sock *l2cap_sk;
struct rfcomm_conninfo cinfo;
+ struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;
int len, err = 0;
u32 opt;
@@ -787,8 +788,8 @@
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
- cinfo.hci_handle = l2cap_pi(l2cap_sk)->conn->hcon->handle;
- memcpy(cinfo.dev_class, l2cap_pi(l2cap_sk)->conn->hcon->dev_class, 3);
+ cinfo.hci_handle = conn->hcon->handle;
+ memcpy(cinfo.dev_class, conn->hcon->dev_class, 3);
len = min_t(unsigned int, len, sizeof(cinfo));
if (copy_to_user(optval, (char *) &cinfo, len))
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 84bbb82..f20c4fd 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -104,3 +104,4 @@
module_exit(br_deinit)
MODULE_LICENSE("GPL");
MODULE_VERSION(BR_VERSION);
+MODULE_ALIAS_RTNL_LINK("bridge");
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 21e5901..a6b2f863 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -74,13 +74,23 @@
return NETDEV_TX_OK;
}
+static int br_dev_init(struct net_device *dev)
+{
+ struct net_bridge *br = netdev_priv(dev);
+
+ br->stats = alloc_percpu(struct br_cpu_netstats);
+ if (!br->stats)
+ return -ENOMEM;
+
+ return 0;
+}
+
static int br_dev_open(struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
netif_carrier_off(dev);
-
- br_features_recompute(br);
+ netdev_update_features(dev);
netif_start_queue(dev);
br_stp_enable_bridge(br);
br_multicast_open(br);
@@ -177,48 +187,11 @@
strcpy(info->bus_info, "N/A");
}
-static int br_set_sg(struct net_device *dev, u32 data)
+static u32 br_fix_features(struct net_device *dev, u32 features)
{
struct net_bridge *br = netdev_priv(dev);
- if (data)
- br->feature_mask |= NETIF_F_SG;
- else
- br->feature_mask &= ~NETIF_F_SG;
-
- br_features_recompute(br);
- return 0;
-}
-
-static int br_set_tso(struct net_device *dev, u32 data)
-{
- struct net_bridge *br = netdev_priv(dev);
-
- if (data)
- br->feature_mask |= NETIF_F_TSO;
- else
- br->feature_mask &= ~NETIF_F_TSO;
-
- br_features_recompute(br);
- return 0;
-}
-
-static int br_set_tx_csum(struct net_device *dev, u32 data)
-{
- struct net_bridge *br = netdev_priv(dev);
-
- if (data)
- br->feature_mask |= NETIF_F_NO_CSUM;
- else
- br->feature_mask &= ~NETIF_F_ALL_CSUM;
-
- br_features_recompute(br);
- return 0;
-}
-
-static int br_set_flags(struct net_device *netdev, u32 data)
-{
- return ethtool_op_set_flags(netdev, data, ETH_FLAG_TXVLAN);
+ return br_features_recompute(br, features);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -319,21 +292,12 @@
static const struct ethtool_ops br_ethtool_ops = {
.get_drvinfo = br_getinfo,
.get_link = ethtool_op_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = br_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = br_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = br_set_tso,
- .get_ufo = ethtool_op_get_ufo,
- .set_ufo = ethtool_op_set_ufo,
- .get_flags = ethtool_op_get_flags,
- .set_flags = br_set_flags,
};
static const struct net_device_ops br_netdev_ops = {
.ndo_open = br_dev_open,
.ndo_stop = br_dev_stop,
+ .ndo_init = br_dev_init,
.ndo_start_xmit = br_dev_xmit,
.ndo_get_stats64 = br_get_stats64,
.ndo_set_mac_address = br_set_mac_address,
@@ -347,6 +311,7 @@
#endif
.ndo_add_slave = br_add_slave,
.ndo_del_slave = br_del_slave,
+ .ndo_fix_features = br_fix_features,
};
static void br_dev_free(struct net_device *dev)
@@ -357,18 +322,49 @@
free_netdev(dev);
}
+static struct device_type br_type = {
+ .name = "bridge",
+};
+
void br_dev_setup(struct net_device *dev)
{
+ struct net_bridge *br = netdev_priv(dev);
+
random_ether_addr(dev->dev_addr);
ether_setup(dev);
dev->netdev_ops = &br_netdev_ops;
dev->destructor = br_dev_free;
SET_ETHTOOL_OPS(dev, &br_ethtool_ops);
+ SET_NETDEV_DEVTYPE(dev, &br_type);
dev->tx_queue_len = 0;
dev->priv_flags = IFF_EBRIDGE;
dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
NETIF_F_GSO_MASK | NETIF_F_NO_CSUM | NETIF_F_LLTX |
- NETIF_F_NETNS_LOCAL | NETIF_F_GSO | NETIF_F_HW_VLAN_TX;
+ NETIF_F_NETNS_LOCAL | NETIF_F_HW_VLAN_TX;
+ dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
+ NETIF_F_GSO_MASK | NETIF_F_NO_CSUM |
+ NETIF_F_HW_VLAN_TX;
+
+ br->dev = dev;
+ spin_lock_init(&br->lock);
+ INIT_LIST_HEAD(&br->port_list);
+ spin_lock_init(&br->hash_lock);
+
+ br->bridge_id.prio[0] = 0x80;
+ br->bridge_id.prio[1] = 0x00;
+
+ memcpy(br->group_addr, br_group_address, ETH_ALEN);
+
+ br->stp_enabled = BR_NO_STP;
+ br->designated_root = br->bridge_id;
+ br->bridge_max_age = br->max_age = 20 * HZ;
+ br->bridge_hello_time = br->hello_time = 2 * HZ;
+ br->bridge_forward_delay = br->forward_delay = 15 * HZ;
+ br->ageing_time = 300 * HZ;
+
+ br_netfilter_rtable_init(br);
+ br_stp_timer_init(br);
+ br_multicast_init(br);
}
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index cc4d3c5..e0dfbc1 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -28,6 +28,7 @@
static struct kmem_cache *br_fdb_cache __read_mostly;
static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr);
+static void fdb_notify(const struct net_bridge_fdb_entry *, int);
static u32 fdb_salt __read_mostly;
@@ -62,7 +63,7 @@
const struct net_bridge_fdb_entry *fdb)
{
return !fdb->is_static &&
- time_before_eq(fdb->ageing_timer + hold_time(br), jiffies);
+ time_before_eq(fdb->updated + hold_time(br), jiffies);
}
static inline int br_mac_hash(const unsigned char *mac)
@@ -81,6 +82,7 @@
static inline void fdb_delete(struct net_bridge_fdb_entry *f)
{
+ fdb_notify(f, RTM_DELNEIGH);
hlist_del_rcu(&f->hlist);
call_rcu(&f->rcu, fdb_rcu_free);
}
@@ -140,7 +142,7 @@
unsigned long this_timer;
if (f->is_static)
continue;
- this_timer = f->ageing_timer + delay;
+ this_timer = f->updated + delay;
if (time_before_eq(this_timer, jiffies))
fdb_delete(f);
else if (time_before(this_timer, next_timer))
@@ -293,7 +295,7 @@
fe->is_local = f->is_local;
if (!f->is_static)
- fe->ageing_timer_value = jiffies_to_clock_t(jiffies - f->ageing_timer);
+ fe->ageing_timer_value = jiffies_to_clock_t(jiffies - f->updated);
++fe;
++num;
}
@@ -305,8 +307,21 @@
return num;
}
-static inline struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
- const unsigned char *addr)
+static struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
+ const unsigned char *addr)
+{
+ struct hlist_node *h;
+ struct net_bridge_fdb_entry *fdb;
+
+ hlist_for_each_entry(fdb, h, head, hlist) {
+ if (!compare_ether_addr(fdb->addr.addr, addr))
+ return fdb;
+ }
+ return NULL;
+}
+
+static struct net_bridge_fdb_entry *fdb_find_rcu(struct hlist_head *head,
+ const unsigned char *addr)
{
struct hlist_node *h;
struct net_bridge_fdb_entry *fdb;
@@ -320,8 +335,7 @@
static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head,
struct net_bridge_port *source,
- const unsigned char *addr,
- int is_local)
+ const unsigned char *addr)
{
struct net_bridge_fdb_entry *fdb;
@@ -329,11 +343,11 @@
if (fdb) {
memcpy(fdb->addr.addr, addr, ETH_ALEN);
fdb->dst = source;
- fdb->is_local = is_local;
- fdb->is_static = is_local;
- fdb->ageing_timer = jiffies;
-
+ fdb->is_local = 0;
+ fdb->is_static = 0;
+ fdb->updated = fdb->used = jiffies;
hlist_add_head_rcu(&fdb->hlist, head);
+ fdb_notify(fdb, RTM_NEWNEIGH);
}
return fdb;
}
@@ -360,12 +374,15 @@
fdb_delete(fdb);
}
- if (!fdb_create(head, source, addr, 1))
+ fdb = fdb_create(head, source, addr);
+ if (!fdb)
return -ENOMEM;
+ fdb->is_local = fdb->is_static = 1;
return 0;
}
+/* Add entry for local address of interface */
int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr)
{
@@ -392,7 +409,7 @@
source->state == BR_STATE_FORWARDING))
return;
- fdb = fdb_find(head, addr);
+ fdb = fdb_find_rcu(head, addr);
if (likely(fdb)) {
/* attempt to update an entry for a local interface */
if (unlikely(fdb->is_local)) {
@@ -403,15 +420,277 @@
} else {
/* fastpath: update of existing entry */
fdb->dst = source;
- fdb->ageing_timer = jiffies;
+ fdb->updated = jiffies;
}
} else {
spin_lock(&br->hash_lock);
- if (!fdb_find(head, addr))
- fdb_create(head, source, addr, 0);
+ if (likely(!fdb_find(head, addr)))
+ fdb_create(head, source, addr);
+
/* else we lose race and someone else inserts
* it first, don't bother updating
*/
spin_unlock(&br->hash_lock);
}
}
+
+static int fdb_to_nud(const struct net_bridge_fdb_entry *fdb)
+{
+ if (fdb->is_local)
+ return NUD_PERMANENT;
+ else if (fdb->is_static)
+ return NUD_NOARP;
+ else if (has_expired(fdb->dst->br, fdb))
+ return NUD_STALE;
+ else
+ return NUD_REACHABLE;
+}
+
+static int fdb_fill_info(struct sk_buff *skb,
+ const struct net_bridge_fdb_entry *fdb,
+ u32 pid, u32 seq, int type, unsigned int flags)
+{
+ unsigned long now = jiffies;
+ struct nda_cacheinfo ci;
+ struct nlmsghdr *nlh;
+ struct ndmsg *ndm;
+
+ nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), flags);
+ if (nlh == NULL)
+ return -EMSGSIZE;
+
+
+ ndm = nlmsg_data(nlh);
+ ndm->ndm_family = AF_BRIDGE;
+ ndm->ndm_pad1 = 0;
+ ndm->ndm_pad2 = 0;
+ ndm->ndm_flags = 0;
+ ndm->ndm_type = 0;
+ ndm->ndm_ifindex = fdb->dst->dev->ifindex;
+ ndm->ndm_state = fdb_to_nud(fdb);
+
+ NLA_PUT(skb, NDA_LLADDR, ETH_ALEN, &fdb->addr);
+
+ ci.ndm_used = jiffies_to_clock_t(now - fdb->used);
+ ci.ndm_confirmed = 0;
+ ci.ndm_updated = jiffies_to_clock_t(now - fdb->updated);
+ ci.ndm_refcnt = 0;
+ NLA_PUT(skb, NDA_CACHEINFO, sizeof(ci), &ci);
+
+ return nlmsg_end(skb, nlh);
+
+nla_put_failure:
+ nlmsg_cancel(skb, nlh);
+ return -EMSGSIZE;
+}
+
+static inline size_t fdb_nlmsg_size(void)
+{
+ return NLMSG_ALIGN(sizeof(struct ndmsg))
+ + nla_total_size(ETH_ALEN) /* NDA_LLADDR */
+ + nla_total_size(sizeof(struct nda_cacheinfo));
+}
+
+static void fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
+{
+ struct net *net = dev_net(fdb->dst->dev);
+ struct sk_buff *skb;
+ int err = -ENOBUFS;
+
+ skb = nlmsg_new(fdb_nlmsg_size(), GFP_ATOMIC);
+ if (skb == NULL)
+ goto errout;
+
+ err = fdb_fill_info(skb, fdb, 0, 0, type, 0);
+ if (err < 0) {
+ /* -EMSGSIZE implies BUG in fdb_nlmsg_size() */
+ WARN_ON(err == -EMSGSIZE);
+ kfree_skb(skb);
+ goto errout;
+ }
+ rtnl_notify(skb, net, 0, RTNLGRP_NEIGH, NULL, GFP_ATOMIC);
+ return;
+errout:
+ if (err < 0)
+ rtnl_set_sk_err(net, RTNLGRP_NEIGH, err);
+}
+
+/* Dump information about entries, in response to GETNEIGH */
+int br_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb)
+{
+ struct net *net = sock_net(skb->sk);
+ struct net_device *dev;
+ int idx = 0;
+
+ rcu_read_lock();
+ for_each_netdev_rcu(net, dev) {
+ struct net_bridge *br = netdev_priv(dev);
+ int i;
+
+ if (!(dev->priv_flags & IFF_EBRIDGE))
+ continue;
+
+ for (i = 0; i < BR_HASH_SIZE; i++) {
+ struct hlist_node *h;
+ struct net_bridge_fdb_entry *f;
+
+ hlist_for_each_entry_rcu(f, h, &br->hash[i], hlist) {
+ if (idx < cb->args[0])
+ goto skip;
+
+ if (fdb_fill_info(skb, f,
+ NETLINK_CB(cb->skb).pid,
+ cb->nlh->nlmsg_seq,
+ RTM_NEWNEIGH,
+ NLM_F_MULTI) < 0)
+ break;
+skip:
+ ++idx;
+ }
+ }
+ }
+ rcu_read_unlock();
+
+ cb->args[0] = idx;
+
+ return skb->len;
+}
+
+/* Create new static fdb entry */
+static int fdb_add_entry(struct net_bridge_port *source, const __u8 *addr,
+ __u16 state)
+{
+ struct net_bridge *br = source->br;
+ struct hlist_head *head = &br->hash[br_mac_hash(addr)];
+ struct net_bridge_fdb_entry *fdb;
+
+ fdb = fdb_find(head, addr);
+ if (fdb)
+ return -EEXIST;
+
+ fdb = fdb_create(head, source, addr);
+ if (!fdb)
+ return -ENOMEM;
+
+ if (state & NUD_PERMANENT)
+ fdb->is_local = fdb->is_static = 1;
+ else if (state & NUD_NOARP)
+ fdb->is_static = 1;
+ return 0;
+}
+
+/* Add new permanent fdb entry with RTM_NEWNEIGH */
+int br_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+ struct net *net = sock_net(skb->sk);
+ struct ndmsg *ndm;
+ struct nlattr *tb[NDA_MAX+1];
+ struct net_device *dev;
+ struct net_bridge_port *p;
+ const __u8 *addr;
+ int err;
+
+ ASSERT_RTNL();
+ err = nlmsg_parse(nlh, sizeof(*ndm), tb, NDA_MAX, NULL);
+ if (err < 0)
+ return err;
+
+ ndm = nlmsg_data(nlh);
+ if (ndm->ndm_ifindex == 0) {
+ pr_info("bridge: RTM_NEWNEIGH with invalid ifindex\n");
+ return -EINVAL;
+ }
+
+ dev = __dev_get_by_index(net, ndm->ndm_ifindex);
+ if (dev == NULL) {
+ pr_info("bridge: RTM_NEWNEIGH with unknown ifindex\n");
+ return -ENODEV;
+ }
+
+ if (!tb[NDA_LLADDR] || nla_len(tb[NDA_LLADDR]) != ETH_ALEN) {
+ pr_info("bridge: RTM_NEWNEIGH with invalid address\n");
+ return -EINVAL;
+ }
+
+ addr = nla_data(tb[NDA_LLADDR]);
+ if (!is_valid_ether_addr(addr)) {
+ pr_info("bridge: RTM_NEWNEIGH with invalid ether address\n");
+ return -EINVAL;
+ }
+
+ p = br_port_get_rtnl(dev);
+ if (p == NULL) {
+ pr_info("bridge: RTM_NEWNEIGH %s not a bridge port\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ spin_lock_bh(&p->br->hash_lock);
+ err = fdb_add_entry(p, addr, ndm->ndm_state);
+ spin_unlock_bh(&p->br->hash_lock);
+
+ return err;
+}
+
+static int fdb_delete_by_addr(struct net_bridge_port *p, const u8 *addr)
+{
+ struct net_bridge *br = p->br;
+ struct hlist_head *head = &br->hash[br_mac_hash(addr)];
+ struct net_bridge_fdb_entry *fdb;
+
+ fdb = fdb_find(head, addr);
+ if (!fdb)
+ return -ENOENT;
+
+ fdb_delete(fdb);
+ return 0;
+}
+
+/* Remove neighbor entry with RTM_DELNEIGH */
+int br_fdb_delete(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+ struct net *net = sock_net(skb->sk);
+ struct ndmsg *ndm;
+ struct net_bridge_port *p;
+ struct nlattr *llattr;
+ const __u8 *addr;
+ struct net_device *dev;
+ int err;
+
+ ASSERT_RTNL();
+ if (nlmsg_len(nlh) < sizeof(*ndm))
+ return -EINVAL;
+
+ ndm = nlmsg_data(nlh);
+ if (ndm->ndm_ifindex == 0) {
+ pr_info("bridge: RTM_DELNEIGH with invalid ifindex\n");
+ return -EINVAL;
+ }
+
+ dev = __dev_get_by_index(net, ndm->ndm_ifindex);
+ if (dev == NULL) {
+ pr_info("bridge: RTM_DELNEIGH with unknown ifindex\n");
+ return -ENODEV;
+ }
+
+ llattr = nlmsg_find_attr(nlh, sizeof(*ndm), NDA_LLADDR);
+ if (llattr == NULL || nla_len(llattr) != ETH_ALEN) {
+ pr_info("bridge: RTM_DELNEIGH with invalid address\n");
+ return -EINVAL;
+ }
+
+ addr = nla_data(llattr);
+
+ p = br_port_get_rtnl(dev);
+ if (p == NULL) {
+ pr_info("bridge: RTM_DELNEIGH %s not a bridge port\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ spin_lock_bh(&p->br->hash_lock);
+ err = fdb_delete_by_addr(p, addr);
+ spin_unlock_bh(&p->br->hash_lock);
+
+ return err;
+}
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 718b603..5dbdfdf 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -36,8 +36,8 @@
if (dev->ethtool_ops && dev->ethtool_ops->get_settings) {
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET, };
- if (!dev->ethtool_ops->get_settings(dev, &ecmd)) {
- switch(ecmd.speed) {
+ if (!dev_ethtool_get_settings(dev, &ecmd)) {
+ switch (ethtool_cmd_speed(&ecmd)) {
case SPEED_10000:
return 2;
case SPEED_1000:
@@ -175,56 +175,6 @@
unregister_netdevice_queue(br->dev, head);
}
-static struct net_device *new_bridge_dev(struct net *net, const char *name)
-{
- struct net_bridge *br;
- struct net_device *dev;
-
- dev = alloc_netdev(sizeof(struct net_bridge), name,
- br_dev_setup);
-
- if (!dev)
- return NULL;
- dev_net_set(dev, net);
-
- br = netdev_priv(dev);
- br->dev = dev;
-
- br->stats = alloc_percpu(struct br_cpu_netstats);
- if (!br->stats) {
- free_netdev(dev);
- return NULL;
- }
-
- spin_lock_init(&br->lock);
- INIT_LIST_HEAD(&br->port_list);
- spin_lock_init(&br->hash_lock);
-
- br->bridge_id.prio[0] = 0x80;
- br->bridge_id.prio[1] = 0x00;
-
- memcpy(br->group_addr, br_group_address, ETH_ALEN);
-
- br->feature_mask = dev->features;
- br->stp_enabled = BR_NO_STP;
- br->designated_root = br->bridge_id;
- br->root_path_cost = 0;
- br->root_port = 0;
- br->bridge_max_age = br->max_age = 20 * HZ;
- br->bridge_hello_time = br->hello_time = 2 * HZ;
- br->bridge_forward_delay = br->forward_delay = 15 * HZ;
- br->topology_change = 0;
- br->topology_change_detected = 0;
- br->ageing_time = 300 * HZ;
-
- br_netfilter_rtable_init(br);
-
- br_stp_timer_init(br);
- br_multicast_init(br);
-
- return dev;
-}
-
/* find an available port number */
static int find_portno(struct net_bridge *br)
{
@@ -277,42 +227,19 @@
return p;
}
-static struct device_type br_type = {
- .name = "bridge",
-};
-
int br_add_bridge(struct net *net, const char *name)
{
struct net_device *dev;
- int ret;
- dev = new_bridge_dev(net, name);
+ dev = alloc_netdev(sizeof(struct net_bridge), name,
+ br_dev_setup);
+
if (!dev)
return -ENOMEM;
- rtnl_lock();
- if (strchr(dev->name, '%')) {
- ret = dev_alloc_name(dev, dev->name);
- if (ret < 0)
- goto out_free;
- }
+ dev_net_set(dev, net);
- SET_NETDEV_DEVTYPE(dev, &br_type);
-
- ret = register_netdevice(dev);
- if (ret)
- goto out_free;
-
- ret = br_sysfs_addbr(dev);
- if (ret)
- unregister_netdevice(dev);
- out:
- rtnl_unlock();
- return ret;
-
-out_free:
- free_netdev(dev);
- goto out;
+ return register_netdev(dev);
}
int br_del_bridge(struct net *net, const char *name)
@@ -364,15 +291,15 @@
/*
* Recomputes features using slave's features
*/
-void br_features_recompute(struct net_bridge *br)
+u32 br_features_recompute(struct net_bridge *br, u32 features)
{
struct net_bridge_port *p;
- u32 features, mask;
+ u32 mask;
- features = mask = br->feature_mask;
if (list_empty(&br->port_list))
- goto done;
+ return features;
+ mask = features;
features &= ~NETIF_F_ONE_FOR_ALL;
list_for_each_entry(p, &br->port_list, list) {
@@ -380,8 +307,7 @@
p->dev->features, mask);
}
-done:
- br->dev->features = netdev_fix_features(br->dev, features);
+ return features;
}
/* called with RTNL */
@@ -446,9 +372,10 @@
list_add_rcu(&p->list, &br->port_list);
+ netdev_update_features(br->dev);
+
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
- br_features_recompute(br);
if ((dev->flags & IFF_UP) && netif_carrier_ok(dev) &&
(br->dev->flags & IFF_UP))
@@ -496,9 +423,10 @@
spin_lock_bh(&br->lock);
br_stp_recalculate_bridge_id(br);
- br_features_recompute(br);
spin_unlock_bh(&br->lock);
+ netdev_update_features(br->dev);
+
return 0;
}
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index e216079..f3ac1e8 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -98,9 +98,10 @@
}
if (skb) {
- if (dst)
+ if (dst) {
+ dst->used = jiffies;
br_forward(dst->dst, skb, skb2);
- else
+ } else
br_flood_forward(br, skb, skb2);
}
@@ -164,7 +165,7 @@
goto drop;
/* If STP is turned off, then forward */
- if (p->br->stp_enabled == BR_NO_STP)
+ if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
goto forward;
if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index 3d9fca0..7222fe1 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -181,40 +181,19 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_bh(&br->lock);
- br->bridge_forward_delay = clock_t_to_jiffies(args[1]);
- if (br_is_root_bridge(br))
- br->forward_delay = br->bridge_forward_delay;
- spin_unlock_bh(&br->lock);
- return 0;
+ return br_set_forward_delay(br, args[1]);
case BRCTL_SET_BRIDGE_HELLO_TIME:
- {
- unsigned long t = clock_t_to_jiffies(args[1]);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- if (t < HZ)
- return -EINVAL;
-
- spin_lock_bh(&br->lock);
- br->bridge_hello_time = t;
- if (br_is_root_bridge(br))
- br->hello_time = br->bridge_hello_time;
- spin_unlock_bh(&br->lock);
- return 0;
- }
+ return br_set_hello_time(br, args[1]);
case BRCTL_SET_BRIDGE_MAX_AGE:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_bh(&br->lock);
- br->bridge_max_age = clock_t_to_jiffies(args[1]);
- if (br_is_root_bridge(br))
- br->max_age = br->bridge_max_age;
- spin_unlock_bh(&br->lock);
- return 0;
+ return br_set_max_age(br, args[1]);
case BRCTL_SET_AGEING_TIME:
if (!capable(CAP_NET_ADMIN))
@@ -275,19 +254,16 @@
case BRCTL_SET_PORT_PRIORITY:
{
struct net_bridge_port *p;
- int ret = 0;
+ int ret;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- if (args[2] >= (1<<(16-BR_PORT_BITS)))
- return -ERANGE;
-
spin_lock_bh(&br->lock);
if ((p = br_get_port(br, args[1])) == NULL)
ret = -EINVAL;
else
- br_stp_set_port_priority(p, args[2]);
+ ret = br_stp_set_port_priority(p, args[2]);
spin_unlock_bh(&br->lock);
return ret;
}
@@ -295,15 +271,17 @@
case BRCTL_SET_PATH_COST:
{
struct net_bridge_port *p;
- int ret = 0;
+ int ret;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ spin_lock_bh(&br->lock);
if ((p = br_get_port(br, args[1])) == NULL)
ret = -EINVAL;
else
- br_stp_set_path_cost(p, args[2]);
+ ret = br_stp_set_path_cost(p, args[2]);
+ spin_unlock_bh(&br->lock);
return ret;
}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 59660c9..2f14eaf 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -413,7 +413,7 @@
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br,
- struct in6_addr *group)
+ const struct in6_addr *group)
{
struct sk_buff *skb;
struct ipv6hdr *ip6h;
@@ -1115,7 +1115,7 @@
struct net_bridge_port *port,
struct sk_buff *skb)
{
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
struct igmphdr *ih = igmp_hdr(skb);
struct net_bridge_mdb_entry *mp;
struct igmpv3_query *ih3;
@@ -1190,7 +1190,7 @@
struct net_bridge_port *port,
struct sk_buff *skb)
{
- struct ipv6hdr *ip6h = ipv6_hdr(skb);
+ const struct ipv6hdr *ip6h = ipv6_hdr(skb);
struct mld_msg *mld = (struct mld_msg *) icmp6_hdr(skb);
struct net_bridge_mdb_entry *mp;
struct mld2_query *mld2q;
@@ -1198,7 +1198,7 @@
struct net_bridge_port_group __rcu **pp;
unsigned long max_delay;
unsigned long now = jiffies;
- struct in6_addr *group = NULL;
+ const struct in6_addr *group = NULL;
int err = 0;
spin_lock(&br->multicast_lock);
@@ -1356,7 +1356,7 @@
struct sk_buff *skb)
{
struct sk_buff *skb2 = skb;
- struct iphdr *iph;
+ const struct iphdr *iph;
struct igmphdr *ih;
unsigned len;
unsigned offset;
@@ -1452,7 +1452,7 @@
struct sk_buff *skb)
{
struct sk_buff *skb2;
- struct ipv6hdr *ip6h;
+ const struct ipv6hdr *ip6h;
struct icmp6hdr *icmp6h;
u8 nexthdr;
unsigned len;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index f3bc322..e1f5ec7 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -219,7 +219,7 @@
static int br_parse_ip_options(struct sk_buff *skb)
{
struct ip_options *opt;
- struct iphdr *iph;
+ const struct iphdr *iph;
struct net_device *dev = skb->dev;
u32 len;
@@ -554,7 +554,7 @@
const struct net_device *out,
int (*okfn)(struct sk_buff *))
{
- struct ipv6hdr *hdr;
+ const struct ipv6hdr *hdr;
u32 pkt_len;
if (skb->len < sizeof(struct ipv6hdr))
@@ -737,7 +737,7 @@
nf_bridge->mask |= BRNF_PKT_TYPE;
}
- if (br_parse_ip_options(skb))
+ if (pf == PF_INET && br_parse_ip_options(skb))
return NF_DROP;
/* The physdev module checks on this */
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index f8bf4c7..ffb0dc4 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -12,9 +12,11 @@
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/etherdevice.h>
#include <net/rtnetlink.h>
#include <net/net_namespace.h>
#include <net/sock.h>
+
#include "br_private.h"
static inline size_t br_nlmsg_size(void)
@@ -118,8 +120,9 @@
int idx;
idx = 0;
- for_each_netdev(net, dev) {
- struct net_bridge_port *port = br_port_get_rtnl(dev);
+ rcu_read_lock();
+ for_each_netdev_rcu(net, dev) {
+ struct net_bridge_port *port = br_port_get_rcu(dev);
/* not a bridge port */
if (!port || idx < cb->args[0])
@@ -133,7 +136,7 @@
skip:
++idx;
}
-
+ rcu_read_unlock();
cb->args[0] = idx;
return skb->len;
@@ -188,20 +191,61 @@
return 0;
}
-
-int __init br_netlink_init(void)
+static int br_validate(struct nlattr *tb[], struct nlattr *data[])
{
- if (__rtnl_register(PF_BRIDGE, RTM_GETLINK, NULL, br_dump_ifinfo))
- return -ENOBUFS;
-
- /* Only the first call to __rtnl_register can fail */
- __rtnl_register(PF_BRIDGE, RTM_SETLINK, br_rtm_setlink, NULL);
+ if (tb[IFLA_ADDRESS]) {
+ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+ return -EINVAL;
+ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+ return -EADDRNOTAVAIL;
+ }
return 0;
}
-void __exit br_netlink_fini(void)
+static struct rtnl_link_ops br_link_ops __read_mostly = {
+ .kind = "bridge",
+ .priv_size = sizeof(struct net_bridge),
+ .setup = br_dev_setup,
+ .validate = br_validate,
+};
+
+int __init br_netlink_init(void)
{
+ int err;
+
+ err = rtnl_link_register(&br_link_ops);
+ if (err < 0)
+ goto err1;
+
+ err = __rtnl_register(PF_BRIDGE, RTM_GETLINK, NULL, br_dump_ifinfo);
+ if (err)
+ goto err2;
+ err = __rtnl_register(PF_BRIDGE, RTM_SETLINK, br_rtm_setlink, NULL);
+ if (err)
+ goto err3;
+ err = __rtnl_register(PF_BRIDGE, RTM_NEWNEIGH, br_fdb_add, NULL);
+ if (err)
+ goto err3;
+ err = __rtnl_register(PF_BRIDGE, RTM_DELNEIGH, br_fdb_delete, NULL);
+ if (err)
+ goto err3;
+ err = __rtnl_register(PF_BRIDGE, RTM_GETNEIGH, NULL, br_fdb_dump);
+ if (err)
+ goto err3;
+
+ return 0;
+
+err3:
rtnl_unregister_all(PF_BRIDGE);
+err2:
+ rtnl_link_unregister(&br_link_ops);
+err1:
+ return err;
}
+void __exit br_netlink_fini(void)
+{
+ rtnl_link_unregister(&br_link_ops);
+ rtnl_unregister_all(PF_BRIDGE);
+}
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index 7d337c9..6545ee9 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -36,6 +36,12 @@
struct net_bridge *br;
int err;
+ /* register of bridge completed, add sysfs entries */
+ if ((dev->priv_flags & IFF_EBRIDGE) && event == NETDEV_REGISTER) {
+ br_sysfs_addbr(dev);
+ return NOTIFY_DONE;
+ }
+
/* not a port of a bridge */
p = br_port_get_rtnl(dev);
if (!p)
@@ -60,10 +66,7 @@
break;
case NETDEV_FEAT_CHANGE:
- spin_lock_bh(&br->lock);
- if (netif_running(br->dev))
- br_features_recompute(br);
- spin_unlock_bh(&br->lock);
+ netdev_update_features(br->dev);
break;
case NETDEV_DOWN:
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 387013d..54578f2 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -64,7 +64,8 @@
struct net_bridge_port *dst;
struct rcu_head rcu;
- unsigned long ageing_timer;
+ unsigned long updated;
+ unsigned long used;
mac_addr addr;
unsigned char is_local;
unsigned char is_static;
@@ -182,7 +183,6 @@
struct br_cpu_netstats __percpu *stats;
spinlock_t hash_lock;
struct hlist_head hash[BR_HASH_SIZE];
- u32 feature_mask;
#ifdef CONFIG_BRIDGE_NETFILTER
struct rtable fake_rtable;
bool nf_call_iptables;
@@ -353,6 +353,9 @@
extern void br_fdb_update(struct net_bridge *br,
struct net_bridge_port *source,
const unsigned char *addr);
+extern int br_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb);
+extern int br_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int br_fdb_delete(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
/* br_forward.c */
extern void br_deliver(const struct net_bridge_port *to,
@@ -375,7 +378,7 @@
extern int br_del_if(struct net_bridge *br,
struct net_device *dev);
extern int br_min_mtu(const struct net_bridge *br);
-extern void br_features_recompute(struct net_bridge *br);
+extern u32 br_features_recompute(struct net_bridge *br, u32 features);
/* br_input.c */
extern int br_handle_frame_finish(struct sk_buff *skb);
@@ -491,6 +494,11 @@
extern void br_init_port(struct net_bridge_port *p);
extern void br_become_designated_port(struct net_bridge_port *p);
+extern int br_set_forward_delay(struct net_bridge *br, unsigned long x);
+extern int br_set_hello_time(struct net_bridge *br, unsigned long x);
+extern int br_set_max_age(struct net_bridge *br, unsigned long x);
+
+
/* br_stp_if.c */
extern void br_stp_enable_bridge(struct net_bridge *br);
extern void br_stp_disable_bridge(struct net_bridge *br);
@@ -501,10 +509,10 @@
extern void br_stp_change_bridge_id(struct net_bridge *br, const unsigned char *a);
extern void br_stp_set_bridge_priority(struct net_bridge *br,
u16 newprio);
-extern void br_stp_set_port_priority(struct net_bridge_port *p,
- u8 newprio);
-extern void br_stp_set_path_cost(struct net_bridge_port *p,
- u32 path_cost);
+extern int br_stp_set_port_priority(struct net_bridge_port *p,
+ unsigned long newprio);
+extern int br_stp_set_path_cost(struct net_bridge_port *p,
+ unsigned long path_cost);
extern ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id);
/* br_stp_bpdu.c */
diff --git a/net/bridge/br_private_stp.h b/net/bridge/br_private_stp.h
index 8b650f7..642ef47 100644
--- a/net/bridge/br_private_stp.h
+++ b/net/bridge/br_private_stp.h
@@ -16,6 +16,19 @@
#define BPDU_TYPE_CONFIG 0
#define BPDU_TYPE_TCN 0x80
+/* IEEE 802.1D-1998 timer values */
+#define BR_MIN_HELLO_TIME (1*HZ)
+#define BR_MAX_HELLO_TIME (10*HZ)
+
+#define BR_MIN_FORWARD_DELAY (2*HZ)
+#define BR_MAX_FORWARD_DELAY (30*HZ)
+
+#define BR_MIN_MAX_AGE (6*HZ)
+#define BR_MAX_MAX_AGE (40*HZ)
+
+#define BR_MIN_PATH_COST 1
+#define BR_MAX_PATH_COST 65535
+
struct br_config_bpdu
{
unsigned topology_change:1;
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 7370d14..bb4383e 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -484,3 +484,51 @@
br_topology_change_acknowledge(p);
}
}
+
+/* Change bridge STP parameter */
+int br_set_hello_time(struct net_bridge *br, unsigned long val)
+{
+ unsigned long t = clock_t_to_jiffies(val);
+
+ if (t < BR_MIN_HELLO_TIME || t > BR_MAX_HELLO_TIME)
+ return -ERANGE;
+
+ spin_lock_bh(&br->lock);
+ br->bridge_hello_time = t;
+ if (br_is_root_bridge(br))
+ br->hello_time = br->bridge_hello_time;
+ spin_unlock_bh(&br->lock);
+ return 0;
+}
+
+int br_set_max_age(struct net_bridge *br, unsigned long val)
+{
+ unsigned long t = clock_t_to_jiffies(val);
+
+ if (t < BR_MIN_MAX_AGE || t > BR_MAX_MAX_AGE)
+ return -ERANGE;
+
+ spin_lock_bh(&br->lock);
+ br->bridge_max_age = t;
+ if (br_is_root_bridge(br))
+ br->max_age = br->bridge_max_age;
+ spin_unlock_bh(&br->lock);
+ return 0;
+
+}
+
+int br_set_forward_delay(struct net_bridge *br, unsigned long val)
+{
+ unsigned long t = clock_t_to_jiffies(val);
+
+ if (br->stp_enabled != BR_NO_STP &&
+ (t < BR_MIN_FORWARD_DELAY || t > BR_MAX_FORWARD_DELAY))
+ return -ERANGE;
+
+ spin_lock_bh(&br->lock);
+ br->bridge_forward_delay = t;
+ if (br_is_root_bridge(br))
+ br->forward_delay = br->bridge_forward_delay;
+ spin_unlock_bh(&br->lock);
+ return 0;
+}
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 9b61d09..6f615b8 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -20,7 +20,7 @@
/* Port id is composed of priority and port number.
- * NB: least significant bits of priority are dropped to
+ * NB: some bits of priority are dropped to
* make room for more ports.
*/
static inline port_id br_make_port_id(__u8 priority, __u16 port_no)
@@ -29,6 +29,8 @@
| (port_no & ((1<<BR_PORT_BITS)-1));
}
+#define BR_MAX_PORT_PRIORITY ((u16)~0 >> BR_PORT_BITS)
+
/* called under bridge lock */
void br_init_port(struct net_bridge_port *p)
{
@@ -255,10 +257,14 @@
}
/* called under bridge lock */
-void br_stp_set_port_priority(struct net_bridge_port *p, u8 newprio)
+int br_stp_set_port_priority(struct net_bridge_port *p, unsigned long newprio)
{
- port_id new_port_id = br_make_port_id(newprio, p->port_no);
+ port_id new_port_id;
+ if (newprio > BR_MAX_PORT_PRIORITY)
+ return -ERANGE;
+
+ new_port_id = br_make_port_id(newprio, p->port_no);
if (br_is_designated_port(p))
p->designated_port = new_port_id;
@@ -269,14 +275,21 @@
br_become_designated_port(p);
br_port_state_selection(p->br);
}
+
+ return 0;
}
/* called under bridge lock */
-void br_stp_set_path_cost(struct net_bridge_port *p, u32 path_cost)
+int br_stp_set_path_cost(struct net_bridge_port *p, unsigned long path_cost)
{
+ if (path_cost < BR_MIN_PATH_COST ||
+ path_cost > BR_MAX_PATH_COST)
+ return -ERANGE;
+
p->path_cost = path_cost;
br_configuration_update(p->br);
br_port_state_selection(p->br);
+ return 0;
}
ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id)
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 5c1e555..68b893e 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -43,9 +43,7 @@
if (endp == buf)
return -EINVAL;
- spin_lock_bh(&br->lock);
err = (*set)(br, val);
- spin_unlock_bh(&br->lock);
return err ? err : len;
}
@@ -57,20 +55,11 @@
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
}
-static int set_forward_delay(struct net_bridge *br, unsigned long val)
-{
- unsigned long delay = clock_t_to_jiffies(val);
- br->forward_delay = delay;
- if (br_is_root_bridge(br))
- br->bridge_forward_delay = delay;
- return 0;
-}
-
static ssize_t store_forward_delay(struct device *d,
struct device_attribute *attr,
const char *buf, size_t len)
{
- return store_bridge_parm(d, buf, len, set_forward_delay);
+ return store_bridge_parm(d, buf, len, br_set_forward_delay);
}
static DEVICE_ATTR(forward_delay, S_IRUGO | S_IWUSR,
show_forward_delay, store_forward_delay);
@@ -82,24 +71,11 @@
jiffies_to_clock_t(to_bridge(d)->hello_time));
}
-static int set_hello_time(struct net_bridge *br, unsigned long val)
-{
- unsigned long t = clock_t_to_jiffies(val);
-
- if (t < HZ)
- return -EINVAL;
-
- br->hello_time = t;
- if (br_is_root_bridge(br))
- br->bridge_hello_time = t;
- return 0;
-}
-
static ssize_t store_hello_time(struct device *d,
struct device_attribute *attr, const char *buf,
size_t len)
{
- return store_bridge_parm(d, buf, len, set_hello_time);
+ return store_bridge_parm(d, buf, len, br_set_hello_time);
}
static DEVICE_ATTR(hello_time, S_IRUGO | S_IWUSR, show_hello_time,
store_hello_time);
@@ -111,19 +87,10 @@
jiffies_to_clock_t(to_bridge(d)->max_age));
}
-static int set_max_age(struct net_bridge *br, unsigned long val)
-{
- unsigned long t = clock_t_to_jiffies(val);
- br->max_age = t;
- if (br_is_root_bridge(br))
- br->bridge_max_age = t;
- return 0;
-}
-
static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
const char *buf, size_t len)
{
- return store_bridge_parm(d, buf, len, set_max_age);
+ return store_bridge_parm(d, buf, len, br_set_max_age);
}
static DEVICE_ATTR(max_age, S_IRUGO | S_IWUSR, show_max_age, store_max_age);
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index fd5799c..6229b62 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -23,7 +23,7 @@
struct brport_attribute {
struct attribute attr;
ssize_t (*show)(struct net_bridge_port *, char *);
- ssize_t (*store)(struct net_bridge_port *, unsigned long);
+ int (*store)(struct net_bridge_port *, unsigned long);
};
#define BRPORT_ATTR(_name,_mode,_show,_store) \
@@ -38,27 +38,17 @@
{
return sprintf(buf, "%d\n", p->path_cost);
}
-static ssize_t store_path_cost(struct net_bridge_port *p, unsigned long v)
-{
- br_stp_set_path_cost(p, v);
- return 0;
-}
+
static BRPORT_ATTR(path_cost, S_IRUGO | S_IWUSR,
- show_path_cost, store_path_cost);
+ show_path_cost, br_stp_set_path_cost);
static ssize_t show_priority(struct net_bridge_port *p, char *buf)
{
return sprintf(buf, "%d\n", p->priority);
}
-static ssize_t store_priority(struct net_bridge_port *p, unsigned long v)
-{
- if (v >= (1<<(16-BR_PORT_BITS)))
- return -ERANGE;
- br_stp_set_port_priority(p, v);
- return 0;
-}
+
static BRPORT_ATTR(priority, S_IRUGO | S_IWUSR,
- show_priority, store_priority);
+ show_priority, br_stp_set_port_priority);
static ssize_t show_designated_root(struct net_bridge_port *p, char *buf)
{
@@ -136,7 +126,7 @@
}
static BRPORT_ATTR(hold_timer, S_IRUGO, show_hold_timer, NULL);
-static ssize_t store_flush(struct net_bridge_port *p, unsigned long v)
+static int store_flush(struct net_bridge_port *p, unsigned long v)
{
br_fdb_delete_by_port(p->br, p, 0); // Don't delete local entry
return 0;
@@ -148,7 +138,7 @@
int hairpin_mode = (p->flags & BR_HAIRPIN_MODE) ? 1 : 0;
return sprintf(buf, "%d\n", hairpin_mode);
}
-static ssize_t store_hairpin_mode(struct net_bridge_port *p, unsigned long v)
+static int store_hairpin_mode(struct net_bridge_port *p, unsigned long v)
{
if (v)
p->flags |= BR_HAIRPIN_MODE;
@@ -165,7 +155,7 @@
return sprintf(buf, "%d\n", p->multicast_router);
}
-static ssize_t store_multicast_router(struct net_bridge_port *p,
+static int store_multicast_router(struct net_bridge_port *p,
unsigned long v)
{
return br_multicast_set_port_router(p, v);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 893669c..1a92b36 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1766,7 +1766,7 @@
newinfo->entries_size = size;
- xt_compat_init_offsets(AF_INET, info->nentries);
+ xt_compat_init_offsets(NFPROTO_BRIDGE, info->nentries);
return EBT_ENTRY_ITERATE(entries, size, compat_calc_entry, info,
entries, newinfo);
}
@@ -1882,7 +1882,7 @@
struct xt_match *match;
struct xt_target *wt;
void *dst = NULL;
- int off, pad = 0, ret = 0;
+ int off, pad = 0;
unsigned int size_kern, entry_offset, match_size = mwt->match_size;
strlcpy(name, mwt->u.name, sizeof(name));
@@ -1935,13 +1935,6 @@
break;
}
- if (!dst) {
- ret = xt_compat_add_offset(NFPROTO_BRIDGE, entry_offset,
- off + ebt_compat_entry_padsize());
- if (ret < 0)
- return ret;
- }
-
state->buf_kern_offset += match_size + off;
state->buf_user_offset += match_size;
pad = XT_ALIGN(size_kern) - size_kern;
@@ -2016,50 +2009,6 @@
return growth;
}
-#define EBT_COMPAT_WATCHER_ITERATE(e, fn, args...) \
-({ \
- unsigned int __i; \
- int __ret = 0; \
- struct compat_ebt_entry_mwt *__watcher; \
- \
- for (__i = e->watchers_offset; \
- __i < (e)->target_offset; \
- __i += __watcher->watcher_size + \
- sizeof(struct compat_ebt_entry_mwt)) { \
- __watcher = (void *)(e) + __i; \
- __ret = fn(__watcher , ## args); \
- if (__ret != 0) \
- break; \
- } \
- if (__ret == 0) { \
- if (__i != (e)->target_offset) \
- __ret = -EINVAL; \
- } \
- __ret; \
-})
-
-#define EBT_COMPAT_MATCH_ITERATE(e, fn, args...) \
-({ \
- unsigned int __i; \
- int __ret = 0; \
- struct compat_ebt_entry_mwt *__match; \
- \
- for (__i = sizeof(struct ebt_entry); \
- __i < (e)->watchers_offset; \
- __i += __match->match_size + \
- sizeof(struct compat_ebt_entry_mwt)) { \
- __match = (void *)(e) + __i; \
- __ret = fn(__match , ## args); \
- if (__ret != 0) \
- break; \
- } \
- if (__ret == 0) { \
- if (__i != (e)->watchers_offset) \
- __ret = -EINVAL; \
- } \
- __ret; \
-})
-
/* called for all ebt_entry structures. */
static int size_entry_mwt(struct ebt_entry *entry, const unsigned char *base,
unsigned int *total,
@@ -2132,6 +2081,14 @@
}
}
+ if (state->buf_kern_start == NULL) {
+ unsigned int offset = buf_start - (char *) base;
+
+ ret = xt_compat_add_offset(NFPROTO_BRIDGE, offset, new_offset);
+ if (ret < 0)
+ return ret;
+ }
+
startoff = state->buf_user_offset - startoff;
BUG_ON(*total < startoff);
@@ -2240,6 +2197,7 @@
xt_compat_lock(NFPROTO_BRIDGE);
+ xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries);
ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state);
if (ret < 0)
goto out_unlock;
diff --git a/net/caif/Makefile b/net/caif/Makefile
index 9d38e40..ebcd4e7 100644
--- a/net/caif/Makefile
+++ b/net/caif/Makefile
@@ -5,7 +5,7 @@
cffrml.o cfveil.o cfdbgl.o\
cfserl.o cfdgml.o \
cfrfml.o cfvidl.o cfutill.o \
- cfsrvl.o cfpkt_skbuff.o caif_config_util.o
+ cfsrvl.o cfpkt_skbuff.o
obj-$(CONFIG_CAIF) += caif.o
obj-$(CONFIG_CAIF_NETDEV) += chnl_net.o
diff --git a/net/caif/caif_config_util.c b/net/caif/caif_config_util.c
deleted file mode 100644
index d522d8c..0000000
--- a/net/caif/caif_config_util.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Author: Sjur Brendeland sjur.brandeland@stericsson.com
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <net/caif/cfctrl.h>
-#include <net/caif/cfcnfg.h>
-#include <net/caif/caif_dev.h>
-
-int connect_req_to_link_param(struct cfcnfg *cnfg,
- struct caif_connect_request *s,
- struct cfctrl_link_param *l)
-{
- struct dev_info *dev_info;
- enum cfcnfg_phy_preference pref;
- int res;
-
- memset(l, 0, sizeof(*l));
- /* In caif protocol low value is high priority */
- l->priority = CAIF_PRIO_MAX - s->priority + 1;
-
- if (s->ifindex != 0){
- res = cfcnfg_get_id_from_ifi(cnfg, s->ifindex);
- if (res < 0)
- return res;
- l->phyid = res;
- }
- else {
- switch (s->link_selector) {
- case CAIF_LINK_HIGH_BANDW:
- pref = CFPHYPREF_HIGH_BW;
- break;
- case CAIF_LINK_LOW_LATENCY:
- pref = CFPHYPREF_LOW_LAT;
- break;
- default:
- return -EINVAL;
- }
- dev_info = cfcnfg_get_phyid(cnfg, pref);
- if (dev_info == NULL)
- return -ENODEV;
- l->phyid = dev_info->id;
- }
- switch (s->protocol) {
- case CAIFPROTO_AT:
- l->linktype = CFCTRL_SRV_VEI;
- if (s->sockaddr.u.at.type == CAIF_ATTYPE_PLAIN)
- l->chtype = 0x02;
- else
- l->chtype = s->sockaddr.u.at.type;
- l->endpoint = 0x00;
- break;
- case CAIFPROTO_DATAGRAM:
- l->linktype = CFCTRL_SRV_DATAGRAM;
- l->chtype = 0x00;
- l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
- break;
- case CAIFPROTO_DATAGRAM_LOOP:
- l->linktype = CFCTRL_SRV_DATAGRAM;
- l->chtype = 0x03;
- l->endpoint = 0x00;
- l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
- break;
- case CAIFPROTO_RFM:
- l->linktype = CFCTRL_SRV_RFM;
- l->u.datagram.connid = s->sockaddr.u.rfm.connection_id;
- strncpy(l->u.rfm.volume, s->sockaddr.u.rfm.volume,
- sizeof(l->u.rfm.volume)-1);
- l->u.rfm.volume[sizeof(l->u.rfm.volume)-1] = 0;
- break;
- case CAIFPROTO_UTIL:
- l->linktype = CFCTRL_SRV_UTIL;
- l->endpoint = 0x00;
- l->chtype = 0x00;
- strncpy(l->u.utility.name, s->sockaddr.u.util.service,
- sizeof(l->u.utility.name)-1);
- l->u.utility.name[sizeof(l->u.utility.name)-1] = 0;
- caif_assert(sizeof(l->u.utility.name) > 10);
- l->u.utility.paramlen = s->param.size;
- if (l->u.utility.paramlen > sizeof(l->u.utility.params))
- l->u.utility.paramlen = sizeof(l->u.utility.params);
-
- memcpy(l->u.utility.params, s->param.data,
- l->u.utility.paramlen);
-
- break;
- case CAIFPROTO_DEBUG:
- l->linktype = CFCTRL_SRV_DBG;
- l->endpoint = s->sockaddr.u.dbg.service;
- l->chtype = s->sockaddr.u.dbg.type;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index a42a408..366ca0f 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -12,49 +12,51 @@
#define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__
#include <linux/version.h>
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/net.h>
#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
+#include <linux/mutex.h>
#include <net/netns/generic.h>
#include <net/net_namespace.h>
#include <net/pkt_sched.h>
#include <net/caif/caif_device.h>
-#include <net/caif/caif_dev.h>
#include <net/caif/caif_layer.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cfcnfg.h>
MODULE_LICENSE("GPL");
-#define TIMEOUT (HZ*5)
/* Used for local tracking of the CAIF net devices */
struct caif_device_entry {
struct cflayer layer;
struct list_head list;
- atomic_t in_use;
- atomic_t state;
- u16 phyid;
struct net_device *netdev;
- wait_queue_head_t event;
+ int __percpu *pcpu_refcnt;
};
struct caif_device_entry_list {
struct list_head list;
/* Protects simulanous deletes in list */
- spinlock_t lock;
+ struct mutex lock;
};
struct caif_net {
+ struct cfcnfg *cfg;
struct caif_device_entry_list caifdevs;
};
static int caif_net_id;
-static struct cfcnfg *cfg;
+
+struct cfcnfg *get_cfcnfg(struct net *net)
+{
+ struct caif_net *caifn;
+ BUG_ON(!net);
+ caifn = net_generic(net, caif_net_id);
+ BUG_ON(!caifn);
+ return caifn->cfg;
+}
+EXPORT_SYMBOL(get_cfcnfg);
static struct caif_device_entry_list *caif_device_list(struct net *net)
{
@@ -65,19 +67,39 @@
return &caifn->caifdevs;
}
+static void caifd_put(struct caif_device_entry *e)
+{
+ irqsafe_cpu_dec(*e->pcpu_refcnt);
+}
+
+static void caifd_hold(struct caif_device_entry *e)
+{
+ irqsafe_cpu_inc(*e->pcpu_refcnt);
+}
+
+static int caifd_refcnt_read(struct caif_device_entry *e)
+{
+ int i, refcnt = 0;
+ for_each_possible_cpu(i)
+ refcnt += *per_cpu_ptr(e->pcpu_refcnt, i);
+ return refcnt;
+}
+
/* Allocate new CAIF device. */
static struct caif_device_entry *caif_device_alloc(struct net_device *dev)
{
struct caif_device_entry_list *caifdevs;
struct caif_device_entry *caifd;
+
caifdevs = caif_device_list(dev_net(dev));
BUG_ON(!caifdevs);
+
caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC);
if (!caifd)
return NULL;
+ caifd->pcpu_refcnt = alloc_percpu(int);
caifd->netdev = dev;
- list_add(&caifd->list, &caifdevs->list);
- init_waitqueue_head(&caifd->event);
+ dev_hold(dev);
return caifd;
}
@@ -87,98 +109,60 @@
caif_device_list(dev_net(dev));
struct caif_device_entry *caifd;
BUG_ON(!caifdevs);
- list_for_each_entry(caifd, &caifdevs->list, list) {
+ list_for_each_entry_rcu(caifd, &caifdevs->list, list) {
if (caifd->netdev == dev)
return caifd;
}
return NULL;
}
-static void caif_device_destroy(struct net_device *dev)
-{
- struct caif_device_entry_list *caifdevs =
- caif_device_list(dev_net(dev));
- struct caif_device_entry *caifd;
- ASSERT_RTNL();
- if (dev->type != ARPHRD_CAIF)
- return;
-
- spin_lock_bh(&caifdevs->lock);
- caifd = caif_get(dev);
- if (caifd == NULL) {
- spin_unlock_bh(&caifdevs->lock);
- return;
- }
-
- list_del(&caifd->list);
- spin_unlock_bh(&caifdevs->lock);
-
- kfree(caifd);
-}
-
static int transmit(struct cflayer *layer, struct cfpkt *pkt)
{
+ int err;
struct caif_device_entry *caifd =
container_of(layer, struct caif_device_entry, layer);
- struct sk_buff *skb, *skb2;
- int ret = -EINVAL;
+ struct sk_buff *skb;
+
skb = cfpkt_tonative(pkt);
skb->dev = caifd->netdev;
- /*
- * Don't allow SKB to be destroyed upon error, but signal resend
- * notification to clients. We can't rely on the return value as
- * congestion (NET_XMIT_CN) sometimes drops the packet, sometimes don't.
- */
- if (netif_queue_stopped(caifd->netdev))
- return -EAGAIN;
- skb2 = skb_get(skb);
- ret = dev_queue_xmit(skb2);
+ err = dev_queue_xmit(skb);
+ if (err > 0)
+ err = -EIO;
- if (!ret)
- kfree_skb(skb);
- else
- return -EAGAIN;
-
- return 0;
-}
-
-static int modemcmd(struct cflayer *layr, enum caif_modemcmd ctrl)
-{
- struct caif_device_entry *caifd;
- struct caif_dev_common *caifdev;
- caifd = container_of(layr, struct caif_device_entry, layer);
- caifdev = netdev_priv(caifd->netdev);
- if (ctrl == _CAIF_MODEMCMD_PHYIF_USEFULL) {
- atomic_set(&caifd->in_use, 1);
- wake_up_interruptible(&caifd->event);
-
- } else if (ctrl == _CAIF_MODEMCMD_PHYIF_USELESS) {
- atomic_set(&caifd->in_use, 0);
- wake_up_interruptible(&caifd->event);
- }
- return 0;
+ return err;
}
/*
- * Stuff received packets to associated sockets.
+ * Stuff received packets into the CAIF stack.
* On error, returns non-zero and releases the skb.
*/
static int receive(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pkttype, struct net_device *orig_dev)
{
- struct net *net;
struct cfpkt *pkt;
struct caif_device_entry *caifd;
- net = dev_net(dev);
+
pkt = cfpkt_fromnative(CAIF_DIR_IN, skb);
+
+ rcu_read_lock();
caifd = caif_get(dev);
- if (!caifd || !caifd->layer.up || !caifd->layer.up->receive)
- return NET_RX_DROP;
- if (caifd->layer.up->receive(caifd->layer.up, pkt))
+ if (!caifd || !caifd->layer.up || !caifd->layer.up->receive ||
+ !netif_oper_up(caifd->netdev)) {
+ rcu_read_unlock();
+ kfree_skb(skb);
return NET_RX_DROP;
+ }
+ /* Hold reference to netdevice while using CAIF stack */
+ caifd_hold(caifd);
+ rcu_read_unlock();
+
+ caifd->layer.up->receive(caifd->layer.up, pkt);
+
+ /* Release reference to stack upwards */
+ caifd_put(caifd);
return 0;
}
@@ -189,15 +173,25 @@
static void dev_flowctrl(struct net_device *dev, int on)
{
- struct caif_device_entry *caifd = caif_get(dev);
- if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd)
+ struct caif_device_entry *caifd;
+
+ rcu_read_lock();
+
+ caifd = caif_get(dev);
+ if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd) {
+ rcu_read_unlock();
return;
+ }
+
+ caifd_hold(caifd);
+ rcu_read_unlock();
caifd->layer.up->ctrlcmd(caifd->layer.up,
on ?
_CAIF_CTRLCMD_PHYIF_FLOW_ON_IND :
_CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND,
caifd->layer.id);
+ caifd_put(caifd);
}
/* notify Caif of device events */
@@ -208,37 +202,28 @@
struct caif_device_entry *caifd = NULL;
struct caif_dev_common *caifdev;
enum cfcnfg_phy_preference pref;
- int res = -EINVAL;
enum cfcnfg_phy_type phy_type;
+ struct cfcnfg *cfg;
+ struct caif_device_entry_list *caifdevs =
+ caif_device_list(dev_net(dev));
if (dev->type != ARPHRD_CAIF)
return 0;
+ cfg = get_cfcnfg(dev_net(dev));
+ if (cfg == NULL)
+ return 0;
+
switch (what) {
case NETDEV_REGISTER:
- netdev_info(dev, "register\n");
caifd = caif_device_alloc(dev);
- if (caifd == NULL)
- break;
+ if (!caifd)
+ return 0;
+
caifdev = netdev_priv(dev);
caifdev->flowctrl = dev_flowctrl;
- atomic_set(&caifd->state, what);
- res = 0;
- break;
- case NETDEV_UP:
- netdev_info(dev, "up\n");
- caifd = caif_get(dev);
- if (caifd == NULL)
- break;
- caifdev = netdev_priv(dev);
- if (atomic_read(&caifd->state) == NETDEV_UP) {
- netdev_info(dev, "already up\n");
- break;
- }
- atomic_set(&caifd->state, what);
caifd->layer.transmit = transmit;
- caifd->layer.modemcmd = modemcmd;
if (caifdev->use_frag)
phy_type = CFPHYTYPE_FRAG;
@@ -256,62 +241,94 @@
pref = CFPHYPREF_HIGH_BW;
break;
}
- dev_hold(dev);
- cfcnfg_add_phy_layer(get_caif_conf(),
- phy_type,
- dev,
- &caifd->layer,
- &caifd->phyid,
- pref,
- caifdev->use_fcs,
- caifdev->use_stx);
strncpy(caifd->layer.name, dev->name,
sizeof(caifd->layer.name) - 1);
caifd->layer.name[sizeof(caifd->layer.name) - 1] = 0;
+
+ mutex_lock(&caifdevs->lock);
+ list_add_rcu(&caifd->list, &caifdevs->list);
+
+ cfcnfg_add_phy_layer(cfg,
+ phy_type,
+ dev,
+ &caifd->layer,
+ pref,
+ caifdev->use_fcs,
+ caifdev->use_stx);
+ mutex_unlock(&caifdevs->lock);
break;
- case NETDEV_GOING_DOWN:
+ case NETDEV_UP:
+ rcu_read_lock();
+
caifd = caif_get(dev);
- if (caifd == NULL)
+ if (caifd == NULL) {
+ rcu_read_unlock();
break;
- netdev_info(dev, "going down\n");
+ }
- if (atomic_read(&caifd->state) == NETDEV_GOING_DOWN ||
- atomic_read(&caifd->state) == NETDEV_DOWN)
- break;
+ cfcnfg_set_phy_state(cfg, &caifd->layer, true);
+ rcu_read_unlock();
- atomic_set(&caifd->state, what);
- if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd)
- return -EINVAL;
- caifd->layer.up->ctrlcmd(caifd->layer.up,
- _CAIF_CTRLCMD_PHYIF_DOWN_IND,
- caifd->layer.id);
- might_sleep();
- res = wait_event_interruptible_timeout(caifd->event,
- atomic_read(&caifd->in_use) == 0,
- TIMEOUT);
break;
case NETDEV_DOWN:
+ rcu_read_lock();
+
caifd = caif_get(dev);
- if (caifd == NULL)
- break;
- netdev_info(dev, "down\n");
- if (atomic_read(&caifd->in_use))
- netdev_warn(dev,
- "Unregistering an active CAIF device\n");
- cfcnfg_del_phy_layer(get_caif_conf(), &caifd->layer);
- dev_put(dev);
- atomic_set(&caifd->state, what);
+ if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd) {
+ rcu_read_unlock();
+ return -EINVAL;
+ }
+
+ cfcnfg_set_phy_state(cfg, &caifd->layer, false);
+ caifd_hold(caifd);
+ rcu_read_unlock();
+
+ caifd->layer.up->ctrlcmd(caifd->layer.up,
+ _CAIF_CTRLCMD_PHYIF_DOWN_IND,
+ caifd->layer.id);
+ caifd_put(caifd);
break;
case NETDEV_UNREGISTER:
+ mutex_lock(&caifdevs->lock);
+
caifd = caif_get(dev);
- if (caifd == NULL)
+ if (caifd == NULL) {
+ mutex_unlock(&caifdevs->lock);
break;
- netdev_info(dev, "unregister\n");
- atomic_set(&caifd->state, what);
- caif_device_destroy(dev);
+ }
+ list_del_rcu(&caifd->list);
+
+ /*
+ * NETDEV_UNREGISTER is called repeatedly until all reference
+ * counts for the net-device are released. If references to
+ * caifd is taken, simply ignore NETDEV_UNREGISTER and wait for
+ * the next call to NETDEV_UNREGISTER.
+ *
+ * If any packets are in flight down the CAIF Stack,
+ * cfcnfg_del_phy_layer will return nonzero.
+ * If no packets are in flight, the CAIF Stack associated
+ * with the net-device un-registering is freed.
+ */
+
+ if (caifd_refcnt_read(caifd) != 0 ||
+ cfcnfg_del_phy_layer(cfg, &caifd->layer) != 0) {
+
+ pr_info("Wait for device inuse\n");
+ /* Enrole device if CAIF Stack is still in use */
+ list_add_rcu(&caifd->list, &caifdevs->list);
+ mutex_unlock(&caifdevs->lock);
+ break;
+ }
+
+ synchronize_rcu();
+ dev_put(caifd->netdev);
+ free_percpu(caifd->pcpu_refcnt);
+ kfree(caifd);
+
+ mutex_unlock(&caifdevs->lock);
break;
}
return 0;
@@ -322,61 +339,60 @@
.priority = 0,
};
-
-struct cfcnfg *get_caif_conf(void)
-{
- return cfg;
-}
-EXPORT_SYMBOL(get_caif_conf);
-
-int caif_connect_client(struct caif_connect_request *conn_req,
- struct cflayer *client_layer, int *ifindex,
- int *headroom, int *tailroom)
-{
- struct cfctrl_link_param param;
- int ret;
- ret = connect_req_to_link_param(get_caif_conf(), conn_req, ¶m);
- if (ret)
- return ret;
- /* Hook up the adaptation layer. */
- return cfcnfg_add_adaptation_layer(get_caif_conf(), ¶m,
- client_layer, ifindex,
- headroom, tailroom);
-}
-EXPORT_SYMBOL(caif_connect_client);
-
-int caif_disconnect_client(struct cflayer *adap_layer)
-{
- return cfcnfg_disconn_adapt_layer(get_caif_conf(), adap_layer);
-}
-EXPORT_SYMBOL(caif_disconnect_client);
-
-void caif_release_client(struct cflayer *adap_layer)
-{
- cfcnfg_release_adap_layer(adap_layer);
-}
-EXPORT_SYMBOL(caif_release_client);
-
/* Per-namespace Caif devices handling */
static int caif_init_net(struct net *net)
{
struct caif_net *caifn = net_generic(net, caif_net_id);
+ BUG_ON(!caifn);
INIT_LIST_HEAD(&caifn->caifdevs.list);
- spin_lock_init(&caifn->caifdevs.lock);
+ mutex_init(&caifn->caifdevs.lock);
+
+ caifn->cfg = cfcnfg_create();
+ if (!caifn->cfg) {
+ pr_warn("can't create cfcnfg\n");
+ return -ENOMEM;
+ }
+
return 0;
}
static void caif_exit_net(struct net *net)
{
- struct net_device *dev;
- int res;
+ struct caif_device_entry *caifd, *tmp;
+ struct caif_device_entry_list *caifdevs =
+ caif_device_list(net);
+ struct cfcnfg *cfg;
+
rtnl_lock();
- for_each_netdev(net, dev) {
- if (dev->type != ARPHRD_CAIF)
- continue;
- res = dev_close(dev);
- caif_device_destroy(dev);
+ mutex_lock(&caifdevs->lock);
+
+ cfg = get_cfcnfg(net);
+ if (cfg == NULL) {
+ mutex_unlock(&caifdevs->lock);
+ return;
}
+
+ list_for_each_entry_safe(caifd, tmp, &caifdevs->list, list) {
+ int i = 0;
+ list_del_rcu(&caifd->list);
+ cfcnfg_set_phy_state(cfg, &caifd->layer, false);
+
+ while (i < 10 &&
+ (caifd_refcnt_read(caifd) != 0 ||
+ cfcnfg_del_phy_layer(cfg, &caifd->layer) != 0)) {
+
+ pr_info("Wait for device inuse\n");
+ msleep(250);
+ i++;
+ }
+ synchronize_rcu();
+ dev_put(caifd->netdev);
+ free_percpu(caifd->pcpu_refcnt);
+ kfree(caifd);
+ }
+ cfcnfg_remove(cfg);
+
+ mutex_unlock(&caifdevs->lock);
rtnl_unlock();
}
@@ -391,32 +407,23 @@
static int __init caif_device_init(void)
{
int result;
- cfg = cfcnfg_create();
- if (!cfg) {
- pr_warn("can't create cfcnfg\n");
- goto err_cfcnfg_create_failed;
- }
+
result = register_pernet_device(&caif_net_ops);
- if (result) {
- kfree(cfg);
- cfg = NULL;
+ if (result)
return result;
- }
- dev_add_pack(&caif_packet_type);
+
register_netdevice_notifier(&caif_device_notifier);
+ dev_add_pack(&caif_packet_type);
return result;
-err_cfcnfg_create_failed:
- return -ENODEV;
}
static void __exit caif_device_exit(void)
{
- dev_remove_pack(&caif_packet_type);
unregister_pernet_device(&caif_net_ops);
unregister_netdevice_notifier(&caif_device_notifier);
- cfcnfg_remove(cfg);
+ dev_remove_pack(&caif_packet_type);
}
module_init(caif_device_init);
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 37a4034..b840395 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -48,6 +48,7 @@
#ifdef CONFIG_DEBUG_FS
struct debug_fs_counter {
atomic_t caif_nr_socks;
+ atomic_t caif_sock_create;
atomic_t num_connect_req;
atomic_t num_connect_resp;
atomic_t num_connect_fail_resp;
@@ -59,11 +60,11 @@
atomic_t num_rx_flow_on;
};
static struct debug_fs_counter cnt;
-#define dbfs_atomic_inc(v) atomic_inc(v)
-#define dbfs_atomic_dec(v) atomic_dec(v)
+#define dbfs_atomic_inc(v) atomic_inc_return(v)
+#define dbfs_atomic_dec(v) atomic_dec_return(v)
#else
-#define dbfs_atomic_inc(v)
-#define dbfs_atomic_dec(v)
+#define dbfs_atomic_inc(v) 0
+#define dbfs_atomic_dec(v) 0
#endif
struct caifsock {
@@ -155,9 +156,10 @@
if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
(unsigned)sk->sk_rcvbuf && rx_flow_is_on(cf_sk)) {
- pr_debug("sending flow OFF (queue len = %d %d)\n",
- atomic_read(&cf_sk->sk.sk_rmem_alloc),
- sk_rcvbuf_lowwater(cf_sk));
+ if (net_ratelimit())
+ pr_debug("sending flow OFF (queue len = %d %d)\n",
+ atomic_read(&cf_sk->sk.sk_rmem_alloc),
+ sk_rcvbuf_lowwater(cf_sk));
set_rx_flow_off(cf_sk);
dbfs_atomic_inc(&cnt.num_rx_flow_off);
caif_flow_ctrl(sk, CAIF_MODEMCMD_FLOW_OFF_REQ);
@@ -168,7 +170,8 @@
return err;
if (!sk_rmem_schedule(sk, skb->truesize) && rx_flow_is_on(cf_sk)) {
set_rx_flow_off(cf_sk);
- pr_debug("sending flow OFF due to rmem_schedule\n");
+ if (net_ratelimit())
+ pr_debug("sending flow OFF due to rmem_schedule\n");
dbfs_atomic_inc(&cnt.num_rx_flow_off);
caif_flow_ctrl(sk, CAIF_MODEMCMD_FLOW_OFF_REQ);
}
@@ -202,13 +205,25 @@
skb = cfpkt_tonative(pkt);
if (unlikely(cf_sk->sk.sk_state != CAIF_CONNECTED)) {
- cfpkt_destroy(pkt);
+ kfree_skb(skb);
return 0;
}
caif_queue_rcv_skb(&cf_sk->sk, skb);
return 0;
}
+static void cfsk_hold(struct cflayer *layr)
+{
+ struct caifsock *cf_sk = container_of(layr, struct caifsock, layer);
+ sock_hold(&cf_sk->sk);
+}
+
+static void cfsk_put(struct cflayer *layr)
+{
+ struct caifsock *cf_sk = container_of(layr, struct caifsock, layer);
+ sock_put(&cf_sk->sk);
+}
+
/* Packet Control Callback function called from CAIF */
static void caif_ctrl_cb(struct cflayer *layr,
enum caif_ctrlcmd flow,
@@ -232,6 +247,8 @@
case CAIF_CTRLCMD_INIT_RSP:
/* We're now connected */
+ caif_client_register_refcnt(&cf_sk->layer,
+ cfsk_hold, cfsk_put);
dbfs_atomic_inc(&cnt.num_connect_resp);
cf_sk->sk.sk_state = CAIF_CONNECTED;
set_tx_flow_on(cf_sk);
@@ -242,7 +259,6 @@
/* We're now disconnected */
cf_sk->sk.sk_state = CAIF_DISCONNECTED;
cf_sk->sk.sk_state_change(&cf_sk->sk);
- cfcnfg_release_adap_layer(&cf_sk->layer);
break;
case CAIF_CTRLCMD_INIT_FAIL_RSP:
@@ -519,43 +535,14 @@
int noblock, long timeo)
{
struct cfpkt *pkt;
- int ret, loopcnt = 0;
pkt = cfpkt_fromnative(CAIF_DIR_OUT, skb);
- memset(cfpkt_info(pkt), 0, sizeof(struct caif_payload_info));
- do {
+ memset(skb->cb, 0, sizeof(struct caif_payload_info));
- ret = -ETIMEDOUT;
+ if (cf_sk->layer.dn == NULL)
+ return -EINVAL;
- /* Slight paranoia, probably not needed. */
- if (unlikely(loopcnt++ > 1000)) {
- pr_warn("transmit retries failed, error = %d\n", ret);
- break;
- }
-
- if (cf_sk->layer.dn != NULL)
- ret = cf_sk->layer.dn->transmit(cf_sk->layer.dn, pkt);
- if (likely(ret >= 0))
- break;
- /* if transmit return -EAGAIN, then retry */
- if (noblock && ret == -EAGAIN)
- break;
- timeo = caif_wait_for_flow_on(cf_sk, 0, timeo, &ret);
- if (signal_pending(current)) {
- ret = sock_intr_errno(timeo);
- break;
- }
- if (ret)
- break;
- if (cf_sk->sk.sk_state != CAIF_CONNECTED ||
- sock_flag(&cf_sk->sk, SOCK_DEAD) ||
- (cf_sk->sk.sk_shutdown & RCV_SHUTDOWN)) {
- ret = -EPIPE;
- cf_sk->sk.sk_err = EPIPE;
- break;
- }
- } while (ret == -EAGAIN);
- return ret;
+ return cf_sk->layer.dn->transmit(cf_sk->layer.dn, pkt);
}
/* Copied from af_unix:unix_dgram_sendmsg, and adapted to CAIF */
@@ -620,7 +607,9 @@
goto err;
ret = transmit_skb(skb, cf_sk, noblock, timeo);
if (ret < 0)
- goto err;
+ /* skb is already freed */
+ return ret;
+
return len;
err:
kfree_skb(skb);
@@ -826,7 +815,7 @@
sk->sk_state == CAIF_DISCONNECTED);
if (sk->sk_shutdown & SHUTDOWN_MASK) {
/* Allow re-connect after SHUTDOWN_IND */
- caif_disconnect_client(&cf_sk->layer);
+ caif_disconnect_client(sock_net(sk), &cf_sk->layer);
break;
}
/* No reconnect on a seqpacket socket */
@@ -852,7 +841,7 @@
sock->state = SS_CONNECTING;
sk->sk_state = CAIF_CONNECTING;
- /* Check priority value coming from socket */
+ /* Check priority value comming from socket */
/* if priority value is out of range it will be ajusted */
if (cf_sk->sk.sk_priority > CAIF_PRIO_MAX)
cf_sk->conn_req.priority = CAIF_PRIO_MAX;
@@ -866,8 +855,10 @@
dbfs_atomic_inc(&cnt.num_connect_req);
cf_sk->layer.receive = caif_sktrecv_cb;
- err = caif_connect_client(&cf_sk->conn_req,
+
+ err = caif_connect_client(sock_net(sk), &cf_sk->conn_req,
&cf_sk->layer, &ifindex, &headroom, &tailroom);
+
if (err < 0) {
cf_sk->sk.sk_socket->state = SS_UNCONNECTED;
cf_sk->sk.sk_state = CAIF_DISCONNECTED;
@@ -947,13 +938,14 @@
* caif_queue_rcv_skb checks SOCK_DEAD holding the queue lock,
* this ensures no packets when sock is dead.
*/
- spin_lock(&sk->sk_receive_queue.lock);
+ spin_lock_bh(&sk->sk_receive_queue.lock);
sock_set_flag(sk, SOCK_DEAD);
- spin_unlock(&sk->sk_receive_queue.lock);
+ spin_unlock_bh(&sk->sk_receive_queue.lock);
sock->sk = NULL;
dbfs_atomic_inc(&cnt.num_disconnect);
+ WARN_ON(IS_ERR(cf_sk->debugfs_socket_dir));
if (cf_sk->debugfs_socket_dir != NULL)
debugfs_remove_recursive(cf_sk->debugfs_socket_dir);
@@ -963,13 +955,12 @@
if (cf_sk->sk.sk_socket->state == SS_CONNECTED ||
cf_sk->sk.sk_socket->state == SS_CONNECTING)
- res = caif_disconnect_client(&cf_sk->layer);
+ res = caif_disconnect_client(sock_net(sk), &cf_sk->layer);
cf_sk->sk.sk_socket->state = SS_DISCONNECTING;
wake_up_interruptible_poll(sk_sleep(sk), POLLERR|POLLHUP);
sock_orphan(sk);
- cf_sk->layer.dn = NULL;
sk_stream_kill_queues(&cf_sk->sk);
release_sock(sk);
sock_put(sk);
@@ -1060,16 +1051,18 @@
caif_assert(sk_unhashed(sk));
caif_assert(!sk->sk_socket);
if (!sock_flag(sk, SOCK_DEAD)) {
- pr_info("Attempt to release alive CAIF socket: %p\n", sk);
+ pr_debug("Attempt to release alive CAIF socket: %p\n", sk);
return;
}
sk_stream_kill_queues(&cf_sk->sk);
dbfs_atomic_dec(&cnt.caif_nr_socks);
+ caif_free_client(&cf_sk->layer);
}
static int caif_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
+ int num;
struct sock *sk = NULL;
struct caifsock *cf_sk = NULL;
static struct proto prot = {.name = "PF_CAIF",
@@ -1132,14 +1125,16 @@
cf_sk->conn_req.protocol = protocol;
/* Increase the number of sockets created. */
dbfs_atomic_inc(&cnt.caif_nr_socks);
+ num = dbfs_atomic_inc(&cnt.caif_sock_create);
#ifdef CONFIG_DEBUG_FS
if (!IS_ERR(debugfsdir)) {
+
/* Fill in some information concerning the misc socket. */
- snprintf(cf_sk->name, sizeof(cf_sk->name), "cfsk%d",
- atomic_read(&cnt.caif_nr_socks));
+ snprintf(cf_sk->name, sizeof(cf_sk->name), "cfsk%d", num);
cf_sk->debugfs_socket_dir =
debugfs_create_dir(cf_sk->name, debugfsdir);
+
debugfs_create_u32("sk_state", S_IRUSR | S_IWUSR,
cf_sk->debugfs_socket_dir,
(u32 *) &cf_sk->sk.sk_state);
@@ -1183,6 +1178,9 @@
debugfs_create_u32("num_sockets", S_IRUSR | S_IWUSR,
debugfsdir,
(u32 *) &cnt.caif_nr_socks);
+ debugfs_create_u32("num_create", S_IRUSR | S_IWUSR,
+ debugfsdir,
+ (u32 *) &cnt.caif_sock_create);
debugfs_create_u32("num_connect_req", S_IRUSR | S_IWUSR,
debugfsdir,
(u32 *) &cnt.num_connect_req);
diff --git a/net/caif/cfcnfg.c b/net/caif/cfcnfg.c
index f1f98d9..351c2ca 100644
--- a/net/caif/cfcnfg.c
+++ b/net/caif/cfcnfg.c
@@ -10,6 +10,7 @@
#include <linux/stddef.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
+#include <linux/module.h>
#include <net/caif/caif_layer.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cfcnfg.h>
@@ -18,11 +19,7 @@
#include <net/caif/cffrml.h>
#include <net/caif/cfserl.h>
#include <net/caif/cfsrvl.h>
-
-#include <linux/module.h>
-#include <asm/atomic.h>
-
-#define MAX_PHY_LAYERS 7
+#include <net/caif/caif_dev.h>
#define container_obj(layr) container_of(layr, struct cfcnfg, layer)
@@ -30,6 +27,9 @@
* to manage physical interfaces
*/
struct cfcnfg_phyinfo {
+ struct list_head node;
+ bool up;
+
/* Pointer to the layer below the MUX (framing layer) */
struct cflayer *frm_layer;
/* Pointer to the lowest actual physical layer */
@@ -39,9 +39,6 @@
/* Preference of the physical in interface */
enum cfcnfg_phy_preference pref;
- /* Reference count, number of channels using the device */
- int phy_ref_count;
-
/* Information about the physical device */
struct dev_info dev_info;
@@ -59,8 +56,8 @@
struct cflayer layer;
struct cflayer *ctrl;
struct cflayer *mux;
- u8 last_phyid;
- struct cfcnfg_phyinfo phy_layers[MAX_PHY_LAYERS];
+ struct list_head phys;
+ struct mutex lock;
};
static void cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id,
@@ -76,6 +73,9 @@
{
struct cfcnfg *this;
struct cfctrl_rsp *resp;
+
+ might_sleep();
+
/* Initiate this layer */
this = kzalloc(sizeof(struct cfcnfg), GFP_ATOMIC);
if (!this) {
@@ -99,27 +99,33 @@
resp->radioset_rsp = cfctrl_resp_func;
resp->linksetup_rsp = cfcnfg_linkup_rsp;
resp->reject_rsp = cfcnfg_reject_rsp;
-
- this->last_phyid = 1;
+ INIT_LIST_HEAD(&this->phys);
cfmuxl_set_uplayer(this->mux, this->ctrl, 0);
layer_set_dn(this->ctrl, this->mux);
layer_set_up(this->ctrl, this);
+ mutex_init(&this->lock);
+
return this;
out_of_mem:
pr_warn("Out of memory\n");
+
+ synchronize_rcu();
+
kfree(this->mux);
kfree(this->ctrl);
kfree(this);
return NULL;
}
-EXPORT_SYMBOL(cfcnfg_create);
void cfcnfg_remove(struct cfcnfg *cfg)
{
+ might_sleep();
if (cfg) {
+ synchronize_rcu();
+
kfree(cfg->mux);
- kfree(cfg->ctrl);
+ cfctrl_remove(cfg->ctrl);
kfree(cfg);
}
}
@@ -128,132 +134,96 @@
{
}
+static struct cfcnfg_phyinfo *cfcnfg_get_phyinfo_rcu(struct cfcnfg *cnfg,
+ u8 phyid)
+{
+ struct cfcnfg_phyinfo *phy;
+
+ list_for_each_entry_rcu(phy, &cnfg->phys, node)
+ if (phy->id == phyid)
+ return phy;
+ return NULL;
+}
+
static void cfctrl_enum_resp(void)
{
}
-struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
+static struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
enum cfcnfg_phy_preference phy_pref)
{
- u16 i;
-
/* Try to match with specified preference */
- for (i = 1; i < MAX_PHY_LAYERS; i++) {
- if (cnfg->phy_layers[i].id == i &&
- cnfg->phy_layers[i].pref == phy_pref &&
- cnfg->phy_layers[i].frm_layer != NULL) {
- caif_assert(cnfg->phy_layers != NULL);
- caif_assert(cnfg->phy_layers[i].id == i);
- return &cnfg->phy_layers[i].dev_info;
- }
+ struct cfcnfg_phyinfo *phy;
+
+ list_for_each_entry_rcu(phy, &cnfg->phys, node) {
+ if (phy->up && phy->pref == phy_pref &&
+ phy->frm_layer != NULL)
+
+ return &phy->dev_info;
}
+
/* Otherwise just return something */
- for (i = 1; i < MAX_PHY_LAYERS; i++) {
- if (cnfg->phy_layers[i].id == i) {
- caif_assert(cnfg->phy_layers != NULL);
- caif_assert(cnfg->phy_layers[i].id == i);
- return &cnfg->phy_layers[i].dev_info;
- }
- }
+ list_for_each_entry_rcu(phy, &cnfg->phys, node)
+ if (phy->up)
+ return &phy->dev_info;
return NULL;
}
-static struct cfcnfg_phyinfo *cfcnfg_get_phyinfo(struct cfcnfg *cnfg,
- u8 phyid)
+static int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi)
{
- int i;
- /* Try to match with specified preference */
- for (i = 0; i < MAX_PHY_LAYERS; i++)
- if (cnfg->phy_layers[i].frm_layer != NULL &&
- cnfg->phy_layers[i].id == phyid)
- return &cnfg->phy_layers[i];
- return NULL;
-}
+ struct cfcnfg_phyinfo *phy;
-
-int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi)
-{
- int i;
- for (i = 0; i < MAX_PHY_LAYERS; i++)
- if (cnfg->phy_layers[i].frm_layer != NULL &&
- cnfg->phy_layers[i].ifindex == ifi)
- return i;
+ list_for_each_entry_rcu(phy, &cnfg->phys, node)
+ if (phy->ifindex == ifi && phy->up)
+ return phy->id;
return -ENODEV;
}
-int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg, struct cflayer *adap_layer)
+int caif_disconnect_client(struct net *net, struct cflayer *adap_layer)
{
u8 channel_id = 0;
int ret = 0;
struct cflayer *servl = NULL;
- struct cfcnfg_phyinfo *phyinfo = NULL;
- u8 phyid = 0;
+ struct cfcnfg *cfg = get_cfcnfg(net);
caif_assert(adap_layer != NULL);
+
channel_id = adap_layer->id;
if (adap_layer->dn == NULL || channel_id == 0) {
pr_err("adap_layer->dn == NULL or adap_layer->id is 0\n");
ret = -ENOTCONN;
goto end;
}
- servl = cfmuxl_remove_uplayer(cnfg->mux, channel_id);
+
+ servl = cfmuxl_remove_uplayer(cfg->mux, channel_id);
if (servl == NULL) {
- pr_err("PROTOCOL ERROR - Error removing service_layer Channel_Id(%d)",
- channel_id);
+ pr_err("PROTOCOL ERROR - "
+ "Error removing service_layer Channel_Id(%d)",
+ channel_id);
ret = -EINVAL;
goto end;
}
- layer_set_up(servl, NULL);
- ret = cfctrl_linkdown_req(cnfg->ctrl, channel_id, adap_layer);
- if (ret)
- goto end;
- caif_assert(channel_id == servl->id);
- if (adap_layer->dn != NULL) {
- phyid = cfsrvl_getphyid(adap_layer->dn);
- phyinfo = cfcnfg_get_phyinfo(cnfg, phyid);
- if (phyinfo == NULL) {
- pr_warn("No interface to send disconnect to\n");
- ret = -ENODEV;
- goto end;
- }
- if (phyinfo->id != phyid ||
- phyinfo->phy_layer->id != phyid ||
- phyinfo->frm_layer->id != phyid) {
- pr_err("Inconsistency in phy registration\n");
- ret = -EINVAL;
- goto end;
- }
- }
- if (phyinfo != NULL && --phyinfo->phy_ref_count == 0 &&
- phyinfo->phy_layer != NULL &&
- phyinfo->phy_layer->modemcmd != NULL) {
- phyinfo->phy_layer->modemcmd(phyinfo->phy_layer,
- _CAIF_MODEMCMD_PHYIF_USELESS);
- }
+ ret = cfctrl_linkdown_req(cfg->ctrl, channel_id, adap_layer);
+
end:
- cfsrvl_put(servl);
- cfctrl_cancel_req(cnfg->ctrl, adap_layer);
+ cfctrl_cancel_req(cfg->ctrl, adap_layer);
+
+ /* Do RCU sync before initiating cleanup */
+ synchronize_rcu();
if (adap_layer->ctrlcmd != NULL)
adap_layer->ctrlcmd(adap_layer, CAIF_CTRLCMD_DEINIT_RSP, 0);
return ret;
}
-EXPORT_SYMBOL(cfcnfg_disconn_adapt_layer);
-
-void cfcnfg_release_adap_layer(struct cflayer *adap_layer)
-{
- if (adap_layer->dn)
- cfsrvl_put(adap_layer->dn);
-}
-EXPORT_SYMBOL(cfcnfg_release_adap_layer);
+EXPORT_SYMBOL(caif_disconnect_client);
static void cfcnfg_linkdestroy_rsp(struct cflayer *layer, u8 channel_id)
{
}
-int protohead[CFCTRL_SRV_MASK] = {
+static const int protohead[CFCTRL_SRV_MASK] = {
[CFCTRL_SRV_VEI] = 4,
[CFCTRL_SRV_DATAGRAM] = 7,
[CFCTRL_SRV_UTIL] = 4,
@@ -261,49 +231,157 @@
[CFCTRL_SRV_DBG] = 3,
};
-int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg,
- struct cfctrl_link_param *param,
- struct cflayer *adap_layer,
- int *ifindex,
+
+static int caif_connect_req_to_link_param(struct cfcnfg *cnfg,
+ struct caif_connect_request *s,
+ struct cfctrl_link_param *l)
+{
+ struct dev_info *dev_info;
+ enum cfcnfg_phy_preference pref;
+ int res;
+
+ memset(l, 0, sizeof(*l));
+ /* In caif protocol low value is high priority */
+ l->priority = CAIF_PRIO_MAX - s->priority + 1;
+
+ if (s->ifindex != 0) {
+ res = cfcnfg_get_id_from_ifi(cnfg, s->ifindex);
+ if (res < 0)
+ return res;
+ l->phyid = res;
+ } else {
+ switch (s->link_selector) {
+ case CAIF_LINK_HIGH_BANDW:
+ pref = CFPHYPREF_HIGH_BW;
+ break;
+ case CAIF_LINK_LOW_LATENCY:
+ pref = CFPHYPREF_LOW_LAT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ dev_info = cfcnfg_get_phyid(cnfg, pref);
+ if (dev_info == NULL)
+ return -ENODEV;
+ l->phyid = dev_info->id;
+ }
+ switch (s->protocol) {
+ case CAIFPROTO_AT:
+ l->linktype = CFCTRL_SRV_VEI;
+ l->endpoint = (s->sockaddr.u.at.type >> 2) & 0x3;
+ l->chtype = s->sockaddr.u.at.type & 0x3;
+ break;
+ case CAIFPROTO_DATAGRAM:
+ l->linktype = CFCTRL_SRV_DATAGRAM;
+ l->chtype = 0x00;
+ l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
+ break;
+ case CAIFPROTO_DATAGRAM_LOOP:
+ l->linktype = CFCTRL_SRV_DATAGRAM;
+ l->chtype = 0x03;
+ l->endpoint = 0x00;
+ l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
+ break;
+ case CAIFPROTO_RFM:
+ l->linktype = CFCTRL_SRV_RFM;
+ l->u.datagram.connid = s->sockaddr.u.rfm.connection_id;
+ strncpy(l->u.rfm.volume, s->sockaddr.u.rfm.volume,
+ sizeof(l->u.rfm.volume)-1);
+ l->u.rfm.volume[sizeof(l->u.rfm.volume)-1] = 0;
+ break;
+ case CAIFPROTO_UTIL:
+ l->linktype = CFCTRL_SRV_UTIL;
+ l->endpoint = 0x00;
+ l->chtype = 0x00;
+ strncpy(l->u.utility.name, s->sockaddr.u.util.service,
+ sizeof(l->u.utility.name)-1);
+ l->u.utility.name[sizeof(l->u.utility.name)-1] = 0;
+ caif_assert(sizeof(l->u.utility.name) > 10);
+ l->u.utility.paramlen = s->param.size;
+ if (l->u.utility.paramlen > sizeof(l->u.utility.params))
+ l->u.utility.paramlen = sizeof(l->u.utility.params);
+
+ memcpy(l->u.utility.params, s->param.data,
+ l->u.utility.paramlen);
+
+ break;
+ case CAIFPROTO_DEBUG:
+ l->linktype = CFCTRL_SRV_DBG;
+ l->endpoint = s->sockaddr.u.dbg.service;
+ l->chtype = s->sockaddr.u.dbg.type;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int caif_connect_client(struct net *net, struct caif_connect_request *conn_req,
+ struct cflayer *adap_layer, int *ifindex,
int *proto_head,
int *proto_tail)
{
struct cflayer *frml;
+ struct cfcnfg_phyinfo *phy;
+ int err;
+ struct cfctrl_link_param param;
+ struct cfcnfg *cfg = get_cfcnfg(net);
+ caif_assert(cfg != NULL);
+
+ rcu_read_lock();
+ err = caif_connect_req_to_link_param(cfg, conn_req, ¶m);
+ if (err)
+ goto unlock;
+
+ phy = cfcnfg_get_phyinfo_rcu(cfg, param.phyid);
+ if (!phy) {
+ err = -ENODEV;
+ goto unlock;
+ }
+ err = -EINVAL;
+
if (adap_layer == NULL) {
pr_err("adap_layer is zero\n");
- return -EINVAL;
+ goto unlock;
}
if (adap_layer->receive == NULL) {
pr_err("adap_layer->receive is NULL\n");
- return -EINVAL;
+ goto unlock;
}
if (adap_layer->ctrlcmd == NULL) {
pr_err("adap_layer->ctrlcmd == NULL\n");
- return -EINVAL;
+ goto unlock;
}
- frml = cnfg->phy_layers[param->phyid].frm_layer;
+
+ err = -ENODEV;
+ frml = phy->frm_layer;
if (frml == NULL) {
pr_err("Specified PHY type does not exist!\n");
- return -ENODEV;
+ goto unlock;
}
- caif_assert(param->phyid == cnfg->phy_layers[param->phyid].id);
- caif_assert(cnfg->phy_layers[param->phyid].frm_layer->id ==
- param->phyid);
- caif_assert(cnfg->phy_layers[param->phyid].phy_layer->id ==
- param->phyid);
+ caif_assert(param.phyid == phy->id);
+ caif_assert(phy->frm_layer->id ==
+ param.phyid);
+ caif_assert(phy->phy_layer->id ==
+ param.phyid);
- *ifindex = cnfg->phy_layers[param->phyid].ifindex;
- *proto_head =
- protohead[param->linktype]+
- (cnfg->phy_layers[param->phyid].use_stx ? 1 : 0);
-
+ *ifindex = phy->ifindex;
*proto_tail = 2;
+ *proto_head =
+
+ protohead[param.linktype] + (phy->use_stx ? 1 : 0);
+
+ rcu_read_unlock();
/* FIXME: ENUMERATE INITIALLY WHEN ACTIVATING PHYSICAL INTERFACE */
- cfctrl_enum_req(cnfg->ctrl, param->phyid);
- return cfctrl_linkup_request(cnfg->ctrl, param, adap_layer);
+ cfctrl_enum_req(cfg->ctrl, param.phyid);
+ return cfctrl_linkup_request(cfg->ctrl, ¶m, adap_layer);
+
+unlock:
+ rcu_read_unlock();
+ return err;
}
-EXPORT_SYMBOL(cfcnfg_add_adaptation_layer);
+EXPORT_SYMBOL(caif_connect_client);
static void cfcnfg_reject_rsp(struct cflayer *layer, u8 channel_id,
struct cflayer *adapt_layer)
@@ -315,32 +393,37 @@
static void
cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id, enum cfctrl_srv serv,
- u8 phyid, struct cflayer *adapt_layer)
+ u8 phyid, struct cflayer *adapt_layer)
{
struct cfcnfg *cnfg = container_obj(layer);
struct cflayer *servicel = NULL;
struct cfcnfg_phyinfo *phyinfo;
struct net_device *netdev;
+ rcu_read_lock();
+
if (adapt_layer == NULL) {
- pr_debug("link setup response but no client exist, send linkdown back\n");
+ pr_debug("link setup response but no client exist,"
+ "send linkdown back\n");
cfctrl_linkdown_req(cnfg->ctrl, channel_id, NULL);
- return;
+ goto unlock;
}
caif_assert(cnfg != NULL);
caif_assert(phyid != 0);
- phyinfo = &cnfg->phy_layers[phyid];
+
+ phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phyid);
+ if (phyinfo == NULL) {
+ pr_err("ERROR: Link Layer Device dissapeared"
+ "while connecting\n");
+ goto unlock;
+ }
+
+ caif_assert(phyinfo != NULL);
caif_assert(phyinfo->id == phyid);
caif_assert(phyinfo->phy_layer != NULL);
caif_assert(phyinfo->phy_layer->id == phyid);
- phyinfo->phy_ref_count++;
- if (phyinfo->phy_ref_count == 1 &&
- phyinfo->phy_layer->modemcmd != NULL) {
- phyinfo->phy_layer->modemcmd(phyinfo->phy_layer,
- _CAIF_MODEMCMD_PHYIF_USEFULL);
- }
adapt_layer->id = channel_id;
switch (serv) {
@@ -348,7 +431,8 @@
servicel = cfvei_create(channel_id, &phyinfo->dev_info);
break;
case CFCTRL_SRV_DATAGRAM:
- servicel = cfdgml_create(channel_id, &phyinfo->dev_info);
+ servicel = cfdgml_create(channel_id,
+ &phyinfo->dev_info);
break;
case CFCTRL_SRV_RFM:
netdev = phyinfo->dev_info.dev;
@@ -365,94 +449,93 @@
servicel = cfdbgl_create(channel_id, &phyinfo->dev_info);
break;
default:
- pr_err("Protocol error. Link setup response - unknown channel type\n");
- return;
+ pr_err("Protocol error. Link setup response "
+ "- unknown channel type\n");
+ goto unlock;
}
if (!servicel) {
pr_warn("Out of memory\n");
- return;
+ goto unlock;
}
layer_set_dn(servicel, cnfg->mux);
cfmuxl_set_uplayer(cnfg->mux, servicel, channel_id);
layer_set_up(servicel, adapt_layer);
layer_set_dn(adapt_layer, servicel);
- cfsrvl_get(servicel);
+
+ rcu_read_unlock();
+
servicel->ctrlcmd(servicel, CAIF_CTRLCMD_INIT_RSP, 0);
+ return;
+unlock:
+ rcu_read_unlock();
}
void
cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
struct net_device *dev, struct cflayer *phy_layer,
- u16 *phyid, enum cfcnfg_phy_preference pref,
+ enum cfcnfg_phy_preference pref,
bool fcs, bool stx)
{
struct cflayer *frml;
struct cflayer *phy_driver = NULL;
+ struct cfcnfg_phyinfo *phyinfo;
int i;
+ u8 phyid;
+ mutex_lock(&cnfg->lock);
- if (cnfg->phy_layers[cnfg->last_phyid].frm_layer == NULL) {
- *phyid = cnfg->last_phyid;
-
- /* range: * 1..(MAX_PHY_LAYERS-1) */
- cnfg->last_phyid =
- (cnfg->last_phyid % (MAX_PHY_LAYERS - 1)) + 1;
- } else {
- *phyid = 0;
- for (i = 1; i < MAX_PHY_LAYERS; i++) {
- if (cnfg->phy_layers[i].frm_layer == NULL) {
- *phyid = i;
- break;
- }
- }
+ /* CAIF protocol allow maximum 6 link-layers */
+ for (i = 0; i < 7; i++) {
+ phyid = (dev->ifindex + i) & 0x7;
+ if (phyid == 0)
+ continue;
+ if (cfcnfg_get_phyinfo_rcu(cnfg, phyid) == NULL)
+ goto got_phyid;
}
- if (*phyid == 0) {
- pr_err("No Available PHY ID\n");
- return;
- }
+ pr_warn("Too many CAIF Link Layers (max 6)\n");
+ goto out;
+
+got_phyid:
+ phyinfo = kzalloc(sizeof(struct cfcnfg_phyinfo), GFP_ATOMIC);
switch (phy_type) {
case CFPHYTYPE_FRAG:
phy_driver =
- cfserl_create(CFPHYTYPE_FRAG, *phyid, stx);
+ cfserl_create(CFPHYTYPE_FRAG, phyid, stx);
if (!phy_driver) {
pr_warn("Out of memory\n");
- return;
+ goto out;
}
-
break;
case CFPHYTYPE_CAIF:
phy_driver = NULL;
break;
default:
- pr_err("%d\n", phy_type);
- return;
- break;
+ goto out;
}
-
- phy_layer->id = *phyid;
- cnfg->phy_layers[*phyid].pref = pref;
- cnfg->phy_layers[*phyid].id = *phyid;
- cnfg->phy_layers[*phyid].dev_info.id = *phyid;
- cnfg->phy_layers[*phyid].dev_info.dev = dev;
- cnfg->phy_layers[*phyid].phy_layer = phy_layer;
- cnfg->phy_layers[*phyid].phy_ref_count = 0;
- cnfg->phy_layers[*phyid].ifindex = dev->ifindex;
- cnfg->phy_layers[*phyid].use_stx = stx;
- cnfg->phy_layers[*phyid].use_fcs = fcs;
+ phy_layer->id = phyid;
+ phyinfo->pref = pref;
+ phyinfo->id = phyid;
+ phyinfo->dev_info.id = phyid;
+ phyinfo->dev_info.dev = dev;
+ phyinfo->phy_layer = phy_layer;
+ phyinfo->ifindex = dev->ifindex;
+ phyinfo->use_stx = stx;
+ phyinfo->use_fcs = fcs;
phy_layer->type = phy_type;
- frml = cffrml_create(*phyid, fcs);
+ frml = cffrml_create(phyid, fcs);
+
if (!frml) {
pr_warn("Out of memory\n");
- return;
+ kfree(phyinfo);
+ goto out;
}
- cnfg->phy_layers[*phyid].frm_layer = frml;
- cfmuxl_set_dnlayer(cnfg->mux, frml, *phyid);
+ phyinfo->frm_layer = frml;
layer_set_up(frml, cnfg->mux);
if (phy_driver != NULL) {
- phy_driver->id = *phyid;
+ phy_driver->id = phyid;
layer_set_dn(frml, phy_driver);
layer_set_up(phy_driver, frml);
layer_set_dn(phy_driver, phy_layer);
@@ -461,33 +544,95 @@
layer_set_dn(frml, phy_layer);
layer_set_up(phy_layer, frml);
}
+
+ list_add_rcu(&phyinfo->node, &cnfg->phys);
+out:
+ mutex_unlock(&cnfg->lock);
}
EXPORT_SYMBOL(cfcnfg_add_phy_layer);
+int cfcnfg_set_phy_state(struct cfcnfg *cnfg, struct cflayer *phy_layer,
+ bool up)
+{
+ struct cfcnfg_phyinfo *phyinfo;
+
+ rcu_read_lock();
+ phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phy_layer->id);
+ if (phyinfo == NULL) {
+ rcu_read_unlock();
+ return -ENODEV;
+ }
+
+ if (phyinfo->up == up) {
+ rcu_read_unlock();
+ return 0;
+ }
+ phyinfo->up = up;
+
+ if (up) {
+ cffrml_hold(phyinfo->frm_layer);
+ cfmuxl_set_dnlayer(cnfg->mux, phyinfo->frm_layer,
+ phy_layer->id);
+ } else {
+ cfmuxl_remove_dnlayer(cnfg->mux, phy_layer->id);
+ cffrml_put(phyinfo->frm_layer);
+ }
+
+ rcu_read_unlock();
+ return 0;
+}
+EXPORT_SYMBOL(cfcnfg_set_phy_state);
+
int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer)
{
struct cflayer *frml, *frml_dn;
u16 phyid;
- phyid = phy_layer->id;
- caif_assert(phyid == cnfg->phy_layers[phyid].id);
- caif_assert(phy_layer == cnfg->phy_layers[phyid].phy_layer);
- caif_assert(phy_layer->id == phyid);
- caif_assert(cnfg->phy_layers[phyid].frm_layer->id == phyid);
+ struct cfcnfg_phyinfo *phyinfo;
- memset(&cnfg->phy_layers[phy_layer->id], 0,
- sizeof(struct cfcnfg_phyinfo));
- frml = cfmuxl_remove_dnlayer(cnfg->mux, phy_layer->id);
+ might_sleep();
+
+ mutex_lock(&cnfg->lock);
+
+ phyid = phy_layer->id;
+ phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phyid);
+
+ if (phyinfo == NULL) {
+ mutex_unlock(&cnfg->lock);
+ return 0;
+ }
+ caif_assert(phyid == phyinfo->id);
+ caif_assert(phy_layer == phyinfo->phy_layer);
+ caif_assert(phy_layer->id == phyid);
+ caif_assert(phyinfo->frm_layer->id == phyid);
+
+ list_del_rcu(&phyinfo->node);
+ synchronize_rcu();
+
+ /* Fail if reference count is not zero */
+ if (cffrml_refcnt_read(phyinfo->frm_layer) != 0) {
+ pr_info("Wait for device inuse\n");
+ list_add_rcu(&phyinfo->node, &cnfg->phys);
+ mutex_unlock(&cnfg->lock);
+ return -EAGAIN;
+ }
+
+ frml = phyinfo->frm_layer;
frml_dn = frml->dn;
cffrml_set_uplayer(frml, NULL);
cffrml_set_dnlayer(frml, NULL);
- kfree(frml);
-
if (phy_layer != frml_dn) {
layer_set_up(frml_dn, NULL);
layer_set_dn(frml_dn, NULL);
- kfree(frml_dn);
}
layer_set_up(phy_layer, NULL);
+
+ if (phyinfo->phy_layer != frml_dn)
+ kfree(frml_dn);
+
+ cffrml_free(frml);
+ kfree(phyinfo);
+ mutex_unlock(&cnfg->lock);
+
return 0;
}
EXPORT_SYMBOL(cfcnfg_del_phy_layer);
diff --git a/net/caif/cfctrl.c b/net/caif/cfctrl.c
index 3cd8f97..0c00a60 100644
--- a/net/caif/cfctrl.c
+++ b/net/caif/cfctrl.c
@@ -17,7 +17,6 @@
#define UTILITY_NAME_LENGTH 16
#define CFPKT_CTRL_PKT_LEN 20
-
#ifdef CAIF_NO_LOOP
static int handle_loop(struct cfctrl *ctrl,
int cmd, struct cfpkt *pkt){
@@ -51,14 +50,31 @@
this->serv.layer.receive = cfctrl_recv;
sprintf(this->serv.layer.name, "ctrl");
this->serv.layer.ctrlcmd = cfctrl_ctrlcmd;
+#ifndef CAIF_NO_LOOP
spin_lock_init(&this->loop_linkid_lock);
+ this->loop_linkid = 1;
+#endif
spin_lock_init(&this->info_list_lock);
INIT_LIST_HEAD(&this->list);
- this->loop_linkid = 1;
return &this->serv.layer;
}
-static bool param_eq(struct cfctrl_link_param *p1, struct cfctrl_link_param *p2)
+void cfctrl_remove(struct cflayer *layer)
+{
+ struct cfctrl_request_info *p, *tmp;
+ struct cfctrl *ctrl = container_obj(layer);
+
+ spin_lock_bh(&ctrl->info_list_lock);
+ list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
+ list_del(&p->list);
+ kfree(p);
+ }
+ spin_unlock_bh(&ctrl->info_list_lock);
+ kfree(layer);
+}
+
+static bool param_eq(const struct cfctrl_link_param *p1,
+ const struct cfctrl_link_param *p2)
{
bool eq =
p1->linktype == p2->linktype &&
@@ -100,8 +116,8 @@
return false;
}
-bool cfctrl_req_eq(struct cfctrl_request_info *r1,
- struct cfctrl_request_info *r2)
+static bool cfctrl_req_eq(const struct cfctrl_request_info *r1,
+ const struct cfctrl_request_info *r2)
{
if (r1->cmd != r2->cmd)
return false;
@@ -112,23 +128,22 @@
}
/* Insert request at the end */
-void cfctrl_insert_req(struct cfctrl *ctrl,
+static void cfctrl_insert_req(struct cfctrl *ctrl,
struct cfctrl_request_info *req)
{
- spin_lock(&ctrl->info_list_lock);
+ spin_lock_bh(&ctrl->info_list_lock);
atomic_inc(&ctrl->req_seq_no);
req->sequence_no = atomic_read(&ctrl->req_seq_no);
list_add_tail(&req->list, &ctrl->list);
- spin_unlock(&ctrl->info_list_lock);
+ spin_unlock_bh(&ctrl->info_list_lock);
}
/* Compare and remove request */
-struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
- struct cfctrl_request_info *req)
+static struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
+ struct cfctrl_request_info *req)
{
struct cfctrl_request_info *p, *tmp, *first;
- spin_lock(&ctrl->info_list_lock);
first = list_first_entry(&ctrl->list, struct cfctrl_request_info, list);
list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
@@ -144,7 +159,6 @@
}
p = NULL;
out:
- spin_unlock(&ctrl->info_list_lock);
return p;
}
@@ -154,16 +168,6 @@
return &this->res;
}
-void cfctrl_set_dnlayer(struct cflayer *this, struct cflayer *dn)
-{
- this->dn = dn;
-}
-
-void cfctrl_set_uplayer(struct cflayer *this, struct cflayer *up)
-{
- this->up = up;
-}
-
static void init_info(struct caif_payload_info *info, struct cfctrl *cfctrl)
{
info->hdr_len = 0;
@@ -188,10 +192,6 @@
cfpkt_addbdy(pkt, physlinkid);
ret =
cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
- if (ret < 0) {
- pr_err("Could not transmit enum message\n");
- cfpkt_destroy(pkt);
- }
}
int cfctrl_linkup_request(struct cflayer *layer,
@@ -205,14 +205,23 @@
struct cfctrl_request_info *req;
int ret;
char utility_name[16];
- struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
+ struct cfpkt *pkt;
+
+ if (cfctrl_cancel_req(layer, user_layer) > 0) {
+ /* Slight Paranoia, check if already connecting */
+ pr_err("Duplicate connect request for same client\n");
+ WARN_ON(1);
+ return -EALREADY;
+ }
+
+ pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
if (!pkt) {
pr_warn("Out of memory\n");
return -ENOMEM;
}
cfpkt_addbdy(pkt, CFCTRL_CMD_LINK_SETUP);
- cfpkt_addbdy(pkt, (param->chtype << 4) + param->linktype);
- cfpkt_addbdy(pkt, (param->priority << 3) + param->phyid);
+ cfpkt_addbdy(pkt, (param->chtype << 4) | param->linktype);
+ cfpkt_addbdy(pkt, (param->priority << 3) | param->phyid);
cfpkt_addbdy(pkt, param->endpoint & 0x03);
switch (param->linktype) {
@@ -275,9 +284,13 @@
ret =
cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
if (ret < 0) {
- pr_err("Could not transmit linksetup request\n");
- cfpkt_destroy(pkt);
- return -ENODEV;
+ int count;
+
+ count = cfctrl_cancel_req(&cfctrl->serv.layer,
+ user_layer);
+ if (count != 1)
+ pr_err("Could not remove request (%d)", count);
+ return -ENODEV;
}
return 0;
}
@@ -297,80 +310,29 @@
init_info(cfpkt_info(pkt), cfctrl);
ret =
cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
- if (ret < 0) {
- pr_err("Could not transmit link-down request\n");
- cfpkt_destroy(pkt);
- }
+#ifndef CAIF_NO_LOOP
+ cfctrl->loop_linkused[channelid] = 0;
+#endif
return ret;
}
-void cfctrl_sleep_req(struct cflayer *layer)
-{
- int ret;
- struct cfctrl *cfctrl = container_obj(layer);
- struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
- if (!pkt) {
- pr_warn("Out of memory\n");
- return;
- }
- cfpkt_addbdy(pkt, CFCTRL_CMD_SLEEP);
- init_info(cfpkt_info(pkt), cfctrl);
- ret =
- cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
- if (ret < 0)
- cfpkt_destroy(pkt);
-}
-
-void cfctrl_wake_req(struct cflayer *layer)
-{
- int ret;
- struct cfctrl *cfctrl = container_obj(layer);
- struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
- if (!pkt) {
- pr_warn("Out of memory\n");
- return;
- }
- cfpkt_addbdy(pkt, CFCTRL_CMD_WAKE);
- init_info(cfpkt_info(pkt), cfctrl);
- ret =
- cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
- if (ret < 0)
- cfpkt_destroy(pkt);
-}
-
-void cfctrl_getstartreason_req(struct cflayer *layer)
-{
- int ret;
- struct cfctrl *cfctrl = container_obj(layer);
- struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
- if (!pkt) {
- pr_warn("Out of memory\n");
- return;
- }
- cfpkt_addbdy(pkt, CFCTRL_CMD_START_REASON);
- init_info(cfpkt_info(pkt), cfctrl);
- ret =
- cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
- if (ret < 0)
- cfpkt_destroy(pkt);
-}
-
-
-void cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer)
+int cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer)
{
struct cfctrl_request_info *p, *tmp;
struct cfctrl *ctrl = container_obj(layr);
- spin_lock(&ctrl->info_list_lock);
+ int found = 0;
+ spin_lock_bh(&ctrl->info_list_lock);
list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
if (p->client_layer == adap_layer) {
- pr_debug("cancel req :%d\n", p->sequence_no);
list_del(&p->list);
kfree(p);
+ found++;
}
}
- spin_unlock(&ctrl->info_list_lock);
+ spin_unlock_bh(&ctrl->info_list_lock);
+ return found;
}
static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
@@ -522,6 +484,7 @@
rsp.cmd = cmd;
rsp.param = linkparam;
+ spin_lock_bh(&cfctrl->info_list_lock);
req = cfctrl_remove_req(cfctrl, &rsp);
if (CFCTRL_ERR_BIT == (CFCTRL_ERR_BIT & cmdrsp) ||
@@ -541,6 +504,8 @@
if (req != NULL)
kfree(req);
+
+ spin_unlock_bh(&cfctrl->info_list_lock);
}
break;
case CFCTRL_CMD_LINK_DESTROY:
@@ -584,12 +549,29 @@
switch (ctrl) {
case _CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND:
case CAIF_CTRLCMD_FLOW_OFF_IND:
- spin_lock(&this->info_list_lock);
+ spin_lock_bh(&this->info_list_lock);
if (!list_empty(&this->list)) {
pr_debug("Received flow off in control layer\n");
}
- spin_unlock(&this->info_list_lock);
+ spin_unlock_bh(&this->info_list_lock);
break;
+ case _CAIF_CTRLCMD_PHYIF_DOWN_IND: {
+ struct cfctrl_request_info *p, *tmp;
+
+ /* Find all connect request and report failure */
+ spin_lock_bh(&this->info_list_lock);
+ list_for_each_entry_safe(p, tmp, &this->list, list) {
+ if (p->param.phyid == phyid) {
+ list_del(&p->list);
+ p->client_layer->ctrlcmd(p->client_layer,
+ CAIF_CTRLCMD_INIT_FAIL_RSP,
+ phyid);
+ kfree(p);
+ }
+ }
+ spin_unlock_bh(&this->info_list_lock);
+ break;
+ }
default:
break;
}
@@ -599,27 +581,33 @@
static int handle_loop(struct cfctrl *ctrl, int cmd, struct cfpkt *pkt)
{
static int last_linkid;
+ static int dec;
u8 linkid, linktype, tmp;
switch (cmd) {
case CFCTRL_CMD_LINK_SETUP:
- spin_lock(&ctrl->loop_linkid_lock);
- for (linkid = last_linkid + 1; linkid < 255; linkid++)
- if (!ctrl->loop_linkused[linkid])
- goto found;
+ spin_lock_bh(&ctrl->loop_linkid_lock);
+ if (!dec) {
+ for (linkid = last_linkid + 1; linkid < 255; linkid++)
+ if (!ctrl->loop_linkused[linkid])
+ goto found;
+ }
+ dec = 1;
for (linkid = last_linkid - 1; linkid > 0; linkid--)
if (!ctrl->loop_linkused[linkid])
goto found;
- spin_unlock(&ctrl->loop_linkid_lock);
- pr_err("Out of link-ids\n");
- return -EINVAL;
+ spin_unlock_bh(&ctrl->loop_linkid_lock);
+
found:
+ if (linkid < 10)
+ dec = 0;
+
if (!ctrl->loop_linkused[linkid])
ctrl->loop_linkused[linkid] = 1;
last_linkid = linkid;
cfpkt_add_trail(pkt, &linkid, 1);
- spin_unlock(&ctrl->loop_linkid_lock);
+ spin_unlock_bh(&ctrl->loop_linkid_lock);
cfpkt_peek_head(pkt, &linktype, 1);
if (linktype == CFCTRL_SRV_UTIL) {
tmp = 0x01;
@@ -629,10 +617,10 @@
break;
case CFCTRL_CMD_LINK_DESTROY:
- spin_lock(&ctrl->loop_linkid_lock);
+ spin_lock_bh(&ctrl->loop_linkid_lock);
cfpkt_peek_head(pkt, &linkid, 1);
ctrl->loop_linkused[linkid] = 0;
- spin_unlock(&ctrl->loop_linkid_lock);
+ spin_unlock_bh(&ctrl->loop_linkid_lock);
break;
default:
break;
diff --git a/net/caif/cfdgml.c b/net/caif/cfdgml.c
index 054fdb5..0382dec 100644
--- a/net/caif/cfdgml.c
+++ b/net/caif/cfdgml.c
@@ -108,10 +108,5 @@
*/
info->hdr_len = 4;
info->dev_info = &service->dev_info;
- ret = layr->dn->transmit(layr->dn, pkt);
- if (ret < 0) {
- u32 tmp32;
- cfpkt_extr_head(pkt, &tmp32, 4);
- }
- return ret;
+ return layr->dn->transmit(layr->dn, pkt);
}
diff --git a/net/caif/cffrml.c b/net/caif/cffrml.c
index a445043..04204b2 100644
--- a/net/caif/cffrml.c
+++ b/net/caif/cffrml.c
@@ -12,6 +12,7 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/crc-ccitt.h>
+#include <linux/netdevice.h>
#include <net/caif/caif_layer.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cffrml.h>
@@ -21,6 +22,7 @@
struct cffrml {
struct cflayer layer;
bool dofcs; /* !< FCS active */
+ int __percpu *pcpu_refcnt;
};
static int cffrml_receive(struct cflayer *layr, struct cfpkt *pkt);
@@ -37,6 +39,12 @@
pr_warn("Out of memory\n");
return NULL;
}
+ this->pcpu_refcnt = alloc_percpu(int);
+ if (this->pcpu_refcnt == NULL) {
+ kfree(this);
+ return NULL;
+ }
+
caif_assert(offsetof(struct cffrml, layer) == 0);
memset(this, 0, sizeof(struct cflayer));
@@ -49,6 +57,13 @@
return (struct cflayer *) this;
}
+void cffrml_free(struct cflayer *layer)
+{
+ struct cffrml *this = container_obj(layer);
+ free_percpu(this->pcpu_refcnt);
+ kfree(layer);
+}
+
void cffrml_set_uplayer(struct cflayer *this, struct cflayer *up)
{
this->up = up;
@@ -112,6 +127,13 @@
cfpkt_destroy(pkt);
return -EPROTO;
}
+
+ if (layr->up == NULL) {
+ pr_err("Layr up is missing!\n");
+ cfpkt_destroy(pkt);
+ return -EINVAL;
+ }
+
return layr->up->receive(layr->up, pkt);
}
@@ -120,7 +142,6 @@
int tmp;
u16 chks;
u16 len;
- int ret;
struct cffrml *this = container_obj(layr);
if (this->dofcs) {
chks = cfpkt_iterate(pkt, cffrml_checksum, 0xffff);
@@ -135,19 +156,44 @@
cfpkt_info(pkt)->hdr_len += 2;
if (cfpkt_erroneous(pkt)) {
pr_err("Packet is erroneous!\n");
+ cfpkt_destroy(pkt);
return -EPROTO;
}
- ret = layr->dn->transmit(layr->dn, pkt);
- if (ret < 0) {
- /* Remove header on faulty packet. */
- cfpkt_extr_head(pkt, &tmp, 2);
+
+ if (layr->dn == NULL) {
+ cfpkt_destroy(pkt);
+ return -ENODEV;
+
}
- return ret;
+ return layr->dn->transmit(layr->dn, pkt);
}
static void cffrml_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
int phyid)
{
- if (layr->up->ctrlcmd)
+ if (layr->up && layr->up->ctrlcmd)
layr->up->ctrlcmd(layr->up, ctrl, layr->id);
}
+
+void cffrml_put(struct cflayer *layr)
+{
+ struct cffrml *this = container_obj(layr);
+ if (layr != NULL && this->pcpu_refcnt != NULL)
+ irqsafe_cpu_dec(*this->pcpu_refcnt);
+}
+
+void cffrml_hold(struct cflayer *layr)
+{
+ struct cffrml *this = container_obj(layr);
+ if (layr != NULL && this->pcpu_refcnt != NULL)
+ irqsafe_cpu_inc(*this->pcpu_refcnt);
+}
+
+int cffrml_refcnt_read(struct cflayer *layr)
+{
+ int i, refcnt = 0;
+ struct cffrml *this = container_obj(layr);
+ for_each_possible_cpu(i)
+ refcnt += *per_cpu_ptr(this->pcpu_refcnt, i);
+ return refcnt;
+}
diff --git a/net/caif/cfmuxl.c b/net/caif/cfmuxl.c
index 24f1ffa..2a56df7 100644
--- a/net/caif/cfmuxl.c
+++ b/net/caif/cfmuxl.c
@@ -9,6 +9,7 @@
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
+#include <linux/rculist.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cfmuxl.h>
#include <net/caif/cfsrvl.h>
@@ -64,66 +65,31 @@
int cfmuxl_set_uplayer(struct cflayer *layr, struct cflayer *up, u8 linkid)
{
struct cfmuxl *muxl = container_obj(layr);
- spin_lock(&muxl->receive_lock);
- cfsrvl_get(up);
- list_add(&up->node, &muxl->srvl_list);
- spin_unlock(&muxl->receive_lock);
+
+ spin_lock_bh(&muxl->receive_lock);
+ list_add_rcu(&up->node, &muxl->srvl_list);
+ spin_unlock_bh(&muxl->receive_lock);
return 0;
}
-bool cfmuxl_is_phy_inuse(struct cflayer *layr, u8 phyid)
-{
- struct list_head *node;
- struct cflayer *layer;
- struct cfmuxl *muxl = container_obj(layr);
- bool match = false;
- spin_lock(&muxl->receive_lock);
-
- list_for_each(node, &muxl->srvl_list) {
- layer = list_entry(node, struct cflayer, node);
- if (cfsrvl_phyid_match(layer, phyid)) {
- match = true;
- break;
- }
-
- }
- spin_unlock(&muxl->receive_lock);
- return match;
-}
-
-u8 cfmuxl_get_phyid(struct cflayer *layr, u8 channel_id)
-{
- struct cflayer *up;
- int phyid;
- struct cfmuxl *muxl = container_obj(layr);
- spin_lock(&muxl->receive_lock);
- up = get_up(muxl, channel_id);
- if (up != NULL)
- phyid = cfsrvl_getphyid(up);
- else
- phyid = 0;
- spin_unlock(&muxl->receive_lock);
- return phyid;
-}
-
int cfmuxl_set_dnlayer(struct cflayer *layr, struct cflayer *dn, u8 phyid)
{
struct cfmuxl *muxl = (struct cfmuxl *) layr;
- spin_lock(&muxl->transmit_lock);
- list_add(&dn->node, &muxl->frml_list);
- spin_unlock(&muxl->transmit_lock);
+
+ spin_lock_bh(&muxl->transmit_lock);
+ list_add_rcu(&dn->node, &muxl->frml_list);
+ spin_unlock_bh(&muxl->transmit_lock);
return 0;
}
static struct cflayer *get_from_id(struct list_head *list, u16 id)
{
- struct list_head *node;
- struct cflayer *layer;
- list_for_each(node, list) {
- layer = list_entry(node, struct cflayer, node);
- if (layer->id == id)
- return layer;
+ struct cflayer *lyr;
+ list_for_each_entry_rcu(lyr, list, node) {
+ if (lyr->id == id)
+ return lyr;
}
+
return NULL;
}
@@ -131,41 +97,45 @@
{
struct cfmuxl *muxl = container_obj(layr);
struct cflayer *dn;
- spin_lock(&muxl->transmit_lock);
- memset(muxl->dn_cache, 0, sizeof(muxl->dn_cache));
+ int idx = phyid % DN_CACHE_SIZE;
+
+ spin_lock_bh(&muxl->transmit_lock);
+ rcu_assign_pointer(muxl->dn_cache[idx], NULL);
dn = get_from_id(&muxl->frml_list, phyid);
- if (dn == NULL) {
- spin_unlock(&muxl->transmit_lock);
- return NULL;
- }
- list_del(&dn->node);
+ if (dn == NULL)
+ goto out;
+
+ list_del_rcu(&dn->node);
caif_assert(dn != NULL);
- spin_unlock(&muxl->transmit_lock);
+out:
+ spin_unlock_bh(&muxl->transmit_lock);
return dn;
}
-/* Invariant: lock is taken */
static struct cflayer *get_up(struct cfmuxl *muxl, u16 id)
{
struct cflayer *up;
int idx = id % UP_CACHE_SIZE;
- up = muxl->up_cache[idx];
+ up = rcu_dereference(muxl->up_cache[idx]);
if (up == NULL || up->id != id) {
+ spin_lock_bh(&muxl->receive_lock);
up = get_from_id(&muxl->srvl_list, id);
- muxl->up_cache[idx] = up;
+ rcu_assign_pointer(muxl->up_cache[idx], up);
+ spin_unlock_bh(&muxl->receive_lock);
}
return up;
}
-/* Invariant: lock is taken */
static struct cflayer *get_dn(struct cfmuxl *muxl, struct dev_info *dev_info)
{
struct cflayer *dn;
int idx = dev_info->id % DN_CACHE_SIZE;
- dn = muxl->dn_cache[idx];
+ dn = rcu_dereference(muxl->dn_cache[idx]);
if (dn == NULL || dn->id != dev_info->id) {
+ spin_lock_bh(&muxl->transmit_lock);
dn = get_from_id(&muxl->frml_list, dev_info->id);
- muxl->dn_cache[idx] = dn;
+ rcu_assign_pointer(muxl->dn_cache[idx], dn);
+ spin_unlock_bh(&muxl->transmit_lock);
}
return dn;
}
@@ -174,15 +144,17 @@
{
struct cflayer *up;
struct cfmuxl *muxl = container_obj(layr);
- spin_lock(&muxl->receive_lock);
- up = get_up(muxl, id);
+ int idx = id % UP_CACHE_SIZE;
+
+ spin_lock_bh(&muxl->receive_lock);
+ up = get_from_id(&muxl->srvl_list, id);
if (up == NULL)
goto out;
- memset(muxl->up_cache, 0, sizeof(muxl->up_cache));
- list_del(&up->node);
- cfsrvl_put(up);
+
+ rcu_assign_pointer(muxl->up_cache[idx], NULL);
+ list_del_rcu(&up->node);
out:
- spin_unlock(&muxl->receive_lock);
+ spin_unlock_bh(&muxl->receive_lock);
return up;
}
@@ -197,58 +169,78 @@
cfpkt_destroy(pkt);
return -EPROTO;
}
-
- spin_lock(&muxl->receive_lock);
+ rcu_read_lock();
up = get_up(muxl, id);
- spin_unlock(&muxl->receive_lock);
+
if (up == NULL) {
- pr_info("Received data on unknown link ID = %d (0x%x) up == NULL",
- id, id);
+ pr_debug("Received data on unknown link ID = %d (0x%x)"
+ " up == NULL", id, id);
cfpkt_destroy(pkt);
/*
* Don't return ERROR, since modem misbehaves and sends out
* flow on before linksetup response.
*/
+
+ rcu_read_unlock();
return /* CFGLU_EPROT; */ 0;
}
+
+ /* We can't hold rcu_lock during receive, so take a ref count instead */
cfsrvl_get(up);
+ rcu_read_unlock();
+
ret = up->receive(up, pkt);
+
cfsrvl_put(up);
return ret;
}
static int cfmuxl_transmit(struct cflayer *layr, struct cfpkt *pkt)
{
- int ret;
struct cfmuxl *muxl = container_obj(layr);
+ int err;
u8 linkid;
struct cflayer *dn;
struct caif_payload_info *info = cfpkt_info(pkt);
- dn = get_dn(muxl, cfpkt_info(pkt)->dev_info);
+ BUG_ON(!info);
+
+ rcu_read_lock();
+
+ dn = get_dn(muxl, info->dev_info);
if (dn == NULL) {
- pr_warn("Send data on unknown phy ID = %d (0x%x)\n",
+ pr_debug("Send data on unknown phy ID = %d (0x%x)\n",
info->dev_info->id, info->dev_info->id);
+ rcu_read_unlock();
+ cfpkt_destroy(pkt);
return -ENOTCONN;
}
+
info->hdr_len += 1;
linkid = info->channel_id;
cfpkt_add_head(pkt, &linkid, 1);
- ret = dn->transmit(dn, pkt);
- /* Remove MUX protocol header upon error. */
- if (ret < 0)
- cfpkt_extr_head(pkt, &linkid, 1);
- return ret;
+
+ /* We can't hold rcu_lock during receive, so take a ref count instead */
+ cffrml_hold(dn);
+
+ rcu_read_unlock();
+
+ err = dn->transmit(dn, pkt);
+
+ cffrml_put(dn);
+ return err;
}
static void cfmuxl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
int phyid)
{
struct cfmuxl *muxl = container_obj(layr);
- struct list_head *node, *next;
struct cflayer *layer;
- list_for_each_safe(node, next, &muxl->srvl_list) {
- layer = list_entry(node, struct cflayer, node);
- if (cfsrvl_phyid_match(layer, phyid))
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(layer, &muxl->srvl_list, node) {
+ if (cfsrvl_phyid_match(layer, phyid) && layer->ctrlcmd)
+ /* NOTE: ctrlcmd is not allowed to block */
layer->ctrlcmd(layer, ctrl, phyid);
}
+ rcu_read_unlock();
}
diff --git a/net/caif/cfpkt_skbuff.c b/net/caif/cfpkt_skbuff.c
index d7e865e..75d4bfa 100644
--- a/net/caif/cfpkt_skbuff.c
+++ b/net/caif/cfpkt_skbuff.c
@@ -42,22 +42,22 @@
bool erronous;
};
-inline struct cfpkt_priv_data *cfpkt_priv(struct cfpkt *pkt)
+static inline struct cfpkt_priv_data *cfpkt_priv(struct cfpkt *pkt)
{
return (struct cfpkt_priv_data *) pkt->skb.cb;
}
-inline bool is_erronous(struct cfpkt *pkt)
+static inline bool is_erronous(struct cfpkt *pkt)
{
return cfpkt_priv(pkt)->erronous;
}
-inline struct sk_buff *pkt_to_skb(struct cfpkt *pkt)
+static inline struct sk_buff *pkt_to_skb(struct cfpkt *pkt)
{
return &pkt->skb;
}
-inline struct cfpkt *skb_to_pkt(struct sk_buff *skb)
+static inline struct cfpkt *skb_to_pkt(struct sk_buff *skb)
{
return (struct cfpkt *) skb;
}
@@ -97,21 +97,20 @@
{
return cfpkt_create_pfx(len + PKT_POSTFIX, PKT_PREFIX);
}
-EXPORT_SYMBOL(cfpkt_create);
void cfpkt_destroy(struct cfpkt *pkt)
{
struct sk_buff *skb = pkt_to_skb(pkt);
kfree_skb(skb);
}
-EXPORT_SYMBOL(cfpkt_destroy);
+
inline bool cfpkt_more(struct cfpkt *pkt)
{
struct sk_buff *skb = pkt_to_skb(pkt);
return skb->len > 0;
}
-EXPORT_SYMBOL(cfpkt_more);
+
int cfpkt_peek_head(struct cfpkt *pkt, void *data, u16 len)
{
@@ -123,7 +122,6 @@
return !cfpkt_extr_head(pkt, data, len) &&
!cfpkt_add_head(pkt, data, len);
}
-EXPORT_SYMBOL(cfpkt_peek_head);
int cfpkt_extr_head(struct cfpkt *pkt, void *data, u16 len)
{
@@ -148,7 +146,6 @@
memcpy(data, from, len);
return 0;
}
-EXPORT_SYMBOL(cfpkt_extr_head);
int cfpkt_extr_trail(struct cfpkt *pkt, void *dta, u16 len)
{
@@ -171,13 +168,13 @@
memcpy(data, from, len);
return 0;
}
-EXPORT_SYMBOL(cfpkt_extr_trail);
+
int cfpkt_pad_trail(struct cfpkt *pkt, u16 len)
{
return cfpkt_add_body(pkt, NULL, len);
}
-EXPORT_SYMBOL(cfpkt_pad_trail);
+
int cfpkt_add_body(struct cfpkt *pkt, const void *data, u16 len)
{
@@ -226,13 +223,11 @@
memcpy(to, data, len);
return 0;
}
-EXPORT_SYMBOL(cfpkt_add_body);
inline int cfpkt_addbdy(struct cfpkt *pkt, u8 data)
{
return cfpkt_add_body(pkt, &data, 1);
}
-EXPORT_SYMBOL(cfpkt_addbdy);
int cfpkt_add_head(struct cfpkt *pkt, const void *data2, u16 len)
{
@@ -259,20 +254,20 @@
memcpy(to, data, len);
return 0;
}
-EXPORT_SYMBOL(cfpkt_add_head);
+
inline int cfpkt_add_trail(struct cfpkt *pkt, const void *data, u16 len)
{
return cfpkt_add_body(pkt, data, len);
}
-EXPORT_SYMBOL(cfpkt_add_trail);
+
inline u16 cfpkt_getlen(struct cfpkt *pkt)
{
struct sk_buff *skb = pkt_to_skb(pkt);
return skb->len;
}
-EXPORT_SYMBOL(cfpkt_getlen);
+
inline u16 cfpkt_iterate(struct cfpkt *pkt,
u16 (*iter_func)(u16, void *, u16),
@@ -290,7 +285,7 @@
}
return iter_func(data, pkt->skb.data, cfpkt_getlen(pkt));
}
-EXPORT_SYMBOL(cfpkt_iterate);
+
int cfpkt_setlen(struct cfpkt *pkt, u16 len)
{
@@ -315,18 +310,6 @@
return cfpkt_getlen(pkt);
}
-EXPORT_SYMBOL(cfpkt_setlen);
-
-struct cfpkt *cfpkt_create_uplink(const unsigned char *data, unsigned int len)
-{
- struct cfpkt *pkt = cfpkt_create_pfx(len + PKT_POSTFIX, PKT_PREFIX);
- if (!pkt)
- return NULL;
- if (unlikely(data != NULL))
- cfpkt_add_body(pkt, data, len);
- return pkt;
-}
-EXPORT_SYMBOL(cfpkt_create_uplink);
struct cfpkt *cfpkt_append(struct cfpkt *dstpkt,
struct cfpkt *addpkt,
@@ -368,7 +351,6 @@
dst->len += addlen;
return skb_to_pkt(dst);
}
-EXPORT_SYMBOL(cfpkt_append);
struct cfpkt *cfpkt_split(struct cfpkt *pkt, u16 pos)
{
@@ -406,174 +388,13 @@
skb2->len += len2nd;
return skb_to_pkt(skb2);
}
-EXPORT_SYMBOL(cfpkt_split);
-char *cfpkt_log_pkt(struct cfpkt *pkt, char *buf, int buflen)
-{
- struct sk_buff *skb = pkt_to_skb(pkt);
- char *p = buf;
- int i;
-
- /*
- * Sanity check buffer length, it needs to be at least as large as
- * the header info: ~=50+ bytes
- */
- if (buflen < 50)
- return NULL;
-
- snprintf(buf, buflen, "%s: pkt:%p len:%ld(%ld+%ld) {%ld,%ld} data: [",
- is_erronous(pkt) ? "ERRONOUS-SKB" :
- (skb->data_len != 0 ? "COMPLEX-SKB" : "SKB"),
- skb,
- (long) skb->len,
- (long) (skb_tail_pointer(skb) - skb->data),
- (long) skb->data_len,
- (long) (skb->data - skb->head),
- (long) (skb_tail_pointer(skb) - skb->head));
- p = buf + strlen(buf);
-
- for (i = 0; i < skb_tail_pointer(skb) - skb->data && i < 300; i++) {
- if (p > buf + buflen - 10) {
- sprintf(p, "...");
- p = buf + strlen(buf);
- break;
- }
- sprintf(p, "%02x,", skb->data[i]);
- p = buf + strlen(buf);
- }
- sprintf(p, "]\n");
- return buf;
-}
-EXPORT_SYMBOL(cfpkt_log_pkt);
-
-int cfpkt_raw_append(struct cfpkt *pkt, void **buf, unsigned int buflen)
-{
- struct sk_buff *skb = pkt_to_skb(pkt);
- struct sk_buff *lastskb;
-
- caif_assert(buf != NULL);
- if (unlikely(is_erronous(pkt)))
- return -EPROTO;
- /* Make sure SKB is writable */
- if (unlikely(skb_cow_data(skb, 0, &lastskb) < 0)) {
- PKT_ERROR(pkt, "skb_cow_data failed\n");
- return -EPROTO;
- }
-
- if (unlikely(skb_linearize(skb) != 0)) {
- PKT_ERROR(pkt, "linearize failed\n");
- return -EPROTO;
- }
-
- if (unlikely(skb_tailroom(skb) < buflen)) {
- PKT_ERROR(pkt, "buffer too short - failed\n");
- return -EPROTO;
- }
-
- *buf = skb_put(skb, buflen);
- return 1;
-}
-EXPORT_SYMBOL(cfpkt_raw_append);
-
-int cfpkt_raw_extract(struct cfpkt *pkt, void **buf, unsigned int buflen)
-{
- struct sk_buff *skb = pkt_to_skb(pkt);
-
- caif_assert(buf != NULL);
- if (unlikely(is_erronous(pkt)))
- return -EPROTO;
-
- if (unlikely(buflen > skb->len)) {
- PKT_ERROR(pkt, "buflen too large - failed\n");
- return -EPROTO;
- }
-
- if (unlikely(buflen > skb_headlen(skb))) {
- if (unlikely(skb_linearize(skb) != 0)) {
- PKT_ERROR(pkt, "linearize failed\n");
- return -EPROTO;
- }
- }
-
- *buf = skb->data;
- skb_pull(skb, buflen);
-
- return 1;
-}
-EXPORT_SYMBOL(cfpkt_raw_extract);
-
-inline bool cfpkt_erroneous(struct cfpkt *pkt)
+bool cfpkt_erroneous(struct cfpkt *pkt)
{
return cfpkt_priv(pkt)->erronous;
}
-EXPORT_SYMBOL(cfpkt_erroneous);
-
-struct cfpktq *cfpktq_create(void)
-{
- struct cfpktq *q = kmalloc(sizeof(struct cfpktq), GFP_ATOMIC);
- if (!q)
- return NULL;
- skb_queue_head_init(&q->head);
- atomic_set(&q->count, 0);
- spin_lock_init(&q->lock);
- return q;
-}
-EXPORT_SYMBOL(cfpktq_create);
-
-void cfpkt_queue(struct cfpktq *pktq, struct cfpkt *pkt, unsigned short prio)
-{
- atomic_inc(&pktq->count);
- spin_lock(&pktq->lock);
- skb_queue_tail(&pktq->head, pkt_to_skb(pkt));
- spin_unlock(&pktq->lock);
-
-}
-EXPORT_SYMBOL(cfpkt_queue);
-
-struct cfpkt *cfpkt_qpeek(struct cfpktq *pktq)
-{
- struct cfpkt *tmp;
- spin_lock(&pktq->lock);
- tmp = skb_to_pkt(skb_peek(&pktq->head));
- spin_unlock(&pktq->lock);
- return tmp;
-}
-EXPORT_SYMBOL(cfpkt_qpeek);
-
-struct cfpkt *cfpkt_dequeue(struct cfpktq *pktq)
-{
- struct cfpkt *pkt;
- spin_lock(&pktq->lock);
- pkt = skb_to_pkt(skb_dequeue(&pktq->head));
- if (pkt) {
- atomic_dec(&pktq->count);
- caif_assert(atomic_read(&pktq->count) >= 0);
- }
- spin_unlock(&pktq->lock);
- return pkt;
-}
-EXPORT_SYMBOL(cfpkt_dequeue);
-
-int cfpkt_qcount(struct cfpktq *pktq)
-{
- return atomic_read(&pktq->count);
-}
-EXPORT_SYMBOL(cfpkt_qcount);
-
-struct cfpkt *cfpkt_clone_release(struct cfpkt *pkt)
-{
- struct cfpkt *clone;
- clone = skb_to_pkt(skb_clone(pkt_to_skb(pkt), GFP_ATOMIC));
- /* Free original packet. */
- cfpkt_destroy(pkt);
- if (!clone)
- return NULL;
- return clone;
-}
-EXPORT_SYMBOL(cfpkt_clone_release);
struct caif_payload_info *cfpkt_info(struct cfpkt *pkt)
{
return (struct caif_payload_info *)&pkt_to_skb(pkt)->cb;
}
-EXPORT_SYMBOL(cfpkt_info);
diff --git a/net/caif/cfrfml.c b/net/caif/cfrfml.c
index e2fb5fa..0deabb4 100644
--- a/net/caif/cfrfml.c
+++ b/net/caif/cfrfml.c
@@ -31,9 +31,9 @@
spinlock_t sync;
};
-static void cfrfml_release(struct kref *kref)
+static void cfrfml_release(struct cflayer *layer)
{
- struct cfsrvl *srvl = container_of(kref, struct cfsrvl, ref);
+ struct cfsrvl *srvl = container_of(layer, struct cfsrvl, layer);
struct cfrfml *rfml = container_obj(&srvl->layer);
if (rfml->incomplete_frm)
diff --git a/net/caif/cfserl.c b/net/caif/cfserl.c
index 8303fe3..2715c84 100644
--- a/net/caif/cfserl.c
+++ b/net/caif/cfserl.c
@@ -179,15 +179,10 @@
static int cfserl_transmit(struct cflayer *layer, struct cfpkt *newpkt)
{
struct cfserl *layr = container_obj(layer);
- int ret;
u8 tmp8 = CFSERL_STX;
if (layr->usestx)
cfpkt_add_head(newpkt, &tmp8, 1);
- ret = layer->dn->transmit(layer->dn, newpkt);
- if (ret < 0)
- cfpkt_extr_head(newpkt, &tmp8, 1);
-
- return ret;
+ return layer->dn->transmit(layer->dn, newpkt);
}
static void cfserl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
diff --git a/net/caif/cfsrvl.c b/net/caif/cfsrvl.c
index ab5e542..535a1e7 100644
--- a/net/caif/cfsrvl.c
+++ b/net/caif/cfsrvl.c
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/caif/caif_layer.h>
#include <net/caif/cfsrvl.h>
#include <net/caif/cfpkt.h>
@@ -27,8 +28,8 @@
{
struct cfsrvl *service = container_obj(layr);
- caif_assert(layr->up != NULL);
- caif_assert(layr->up->ctrlcmd != NULL);
+ if (layr->up == NULL || layr->up->ctrlcmd == NULL)
+ return;
switch (ctrl) {
case CAIF_CTRLCMD_INIT_RSP:
@@ -151,14 +152,9 @@
return -EINVAL;
}
-void cfservl_destroy(struct cflayer *layer)
+static void cfsrvl_release(struct cflayer *layer)
{
- kfree(layer);
-}
-
-void cfsrvl_release(struct kref *kref)
-{
- struct cfsrvl *service = container_of(kref, struct cfsrvl, ref);
+ struct cfsrvl *service = container_of(layer, struct cfsrvl, layer);
kfree(service);
}
@@ -178,10 +174,8 @@
service->dev_info = *dev_info;
service->supports_flowctrl = supports_flowctrl;
service->release = cfsrvl_release;
- kref_init(&service->ref);
}
-
bool cfsrvl_ready(struct cfsrvl *service, int *err)
{
if (service->open && service->modem_flow_on && service->phy_flow_on)
@@ -194,6 +188,7 @@
*err = -EAGAIN;
return false;
}
+
u8 cfsrvl_getphyid(struct cflayer *layer)
{
struct cfsrvl *servl = container_obj(layer);
@@ -205,3 +200,26 @@
struct cfsrvl *servl = container_obj(layer);
return servl->dev_info.id == phyid;
}
+
+void caif_free_client(struct cflayer *adap_layer)
+{
+ struct cfsrvl *servl;
+ if (adap_layer == NULL || adap_layer->dn == NULL)
+ return;
+ servl = container_obj(adap_layer->dn);
+ servl->release(&servl->layer);
+}
+EXPORT_SYMBOL(caif_free_client);
+
+void caif_client_register_refcnt(struct cflayer *adapt_layer,
+ void (*hold)(struct cflayer *lyr),
+ void (*put)(struct cflayer *lyr))
+{
+ struct cfsrvl *service;
+ service = container_of(adapt_layer->dn, struct cfsrvl, layer);
+
+ WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL);
+ service->hold = hold;
+ service->put = put;
+}
+EXPORT_SYMBOL(caif_client_register_refcnt);
diff --git a/net/caif/cfutill.c b/net/caif/cfutill.c
index 315c0d6..98e027d 100644
--- a/net/caif/cfutill.c
+++ b/net/caif/cfutill.c
@@ -100,10 +100,5 @@
*/
info->hdr_len = 1;
info->dev_info = &service->dev_info;
- ret = layr->dn->transmit(layr->dn, pkt);
- if (ret < 0) {
- u32 tmp32;
- cfpkt_extr_head(pkt, &tmp32, 4);
- }
- return ret;
+ return layr->dn->transmit(layr->dn, pkt);
}
diff --git a/net/caif/cfveil.c b/net/caif/cfveil.c
index c3b1dec..3ec83fb 100644
--- a/net/caif/cfveil.c
+++ b/net/caif/cfveil.c
@@ -82,13 +82,14 @@
int ret;
struct cfsrvl *service = container_obj(layr);
if (!cfsrvl_ready(service, &ret))
- return ret;
+ goto err;
caif_assert(layr->dn != NULL);
caif_assert(layr->dn->transmit != NULL);
if (cfpkt_add_head(pkt, &tmp, 1) < 0) {
pr_err("Packet is erroneous!\n");
- return -EPROTO;
+ ret = -EPROTO;
+ goto err;
}
/* Add info-> for MUX-layer to route the packet out. */
@@ -96,8 +97,8 @@
info->channel_id = service->layer.id;
info->hdr_len = 1;
info->dev_info = &service->dev_info;
- ret = layr->dn->transmit(layr->dn, pkt);
- if (ret < 0)
- cfpkt_extr_head(pkt, &tmp, 1);
+ return layr->dn->transmit(layr->dn, pkt);
+err:
+ cfpkt_destroy(pkt);
return ret;
}
diff --git a/net/caif/cfvidl.c b/net/caif/cfvidl.c
index bf6fef2..b2f5989 100644
--- a/net/caif/cfvidl.c
+++ b/net/caif/cfvidl.c
@@ -60,8 +60,5 @@
info = cfpkt_info(pkt);
info->channel_id = service->layer.id;
info->dev_info = &service->dev_info;
- ret = layr->dn->transmit(layr->dn, pkt);
- if (ret < 0)
- cfpkt_extr_head(pkt, &videoheader, 4);
- return ret;
+ return layr->dn->transmit(layr->dn, pkt);
}
diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c
index 6008d6d..649ebac 100644
--- a/net/caif/chnl_net.c
+++ b/net/caif/chnl_net.c
@@ -20,7 +20,6 @@
#include <linux/caif/if_caif.h>
#include <net/rtnetlink.h>
#include <net/caif/caif_layer.h>
-#include <net/caif/cfcnfg.h>
#include <net/caif/cfpkt.h>
#include <net/caif/caif_dev.h>
@@ -84,10 +83,11 @@
if (!priv)
return -EINVAL;
- /* Get length of CAIF packet. */
- pktlen = cfpkt_getlen(pkt);
-
skb = (struct sk_buff *) cfpkt_tonative(pkt);
+
+ /* Get length of CAIF packet. */
+ pktlen = skb->len;
+
/* Pass some minimum information and
* send the packet to the net stack.
*/
@@ -153,6 +153,18 @@
}
static DECLARE_WORK(close_worker, close_work);
+static void chnl_hold(struct cflayer *lyr)
+{
+ struct chnl_net *priv = container_of(lyr, struct chnl_net, chnl);
+ dev_hold(priv->netdev);
+}
+
+static void chnl_put(struct cflayer *lyr)
+{
+ struct chnl_net *priv = container_of(lyr, struct chnl_net, chnl);
+ dev_put(priv->netdev);
+}
+
static void chnl_flowctrl_cb(struct cflayer *layr, enum caif_ctrlcmd flow,
int phyid)
{
@@ -190,6 +202,7 @@
netif_wake_queue(priv->netdev);
break;
case CAIF_CTRLCMD_INIT_RSP:
+ caif_client_register_refcnt(&priv->chnl, chnl_hold, chnl_put);
priv->state = CAIF_CONNECTED;
priv->flowenabled = true;
netif_wake_queue(priv->netdev);
@@ -257,8 +270,9 @@
if (priv->state != CAIF_CONNECTING) {
priv->state = CAIF_CONNECTING;
- result = caif_connect_client(&priv->conn_req, &priv->chnl,
- &llifindex, &headroom, &tailroom);
+ result = caif_connect_client(dev_net(dev), &priv->conn_req,
+ &priv->chnl, &llifindex,
+ &headroom, &tailroom);
if (result != 0) {
pr_debug("err: "
"Unable to register and open device,"
@@ -314,7 +328,7 @@
if (result == 0) {
pr_debug("connect timeout\n");
- caif_disconnect_client(&priv->chnl);
+ caif_disconnect_client(dev_net(dev), &priv->chnl);
priv->state = CAIF_DISCONNECTED;
pr_debug("state disconnected\n");
result = -ETIMEDOUT;
@@ -330,7 +344,7 @@
return 0;
error:
- caif_disconnect_client(&priv->chnl);
+ caif_disconnect_client(dev_net(dev), &priv->chnl);
priv->state = CAIF_DISCONNECTED;
pr_debug("state disconnected\n");
return result;
@@ -344,7 +358,7 @@
ASSERT_RTNL();
priv = netdev_priv(dev);
priv->state = CAIF_DISCONNECTED;
- caif_disconnect_client(&priv->chnl);
+ caif_disconnect_client(dev_net(dev), &priv->chnl);
return 0;
}
@@ -373,11 +387,18 @@
.ndo_start_xmit = chnl_net_start_xmit,
};
+static void chnl_net_destructor(struct net_device *dev)
+{
+ struct chnl_net *priv = netdev_priv(dev);
+ caif_free_client(&priv->chnl);
+ free_netdev(dev);
+}
+
static void ipcaif_net_setup(struct net_device *dev)
{
struct chnl_net *priv;
dev->netdev_ops = &netdev_ops;
- dev->destructor = free_netdev;
+ dev->destructor = chnl_net_destructor;
dev->flags |= IFF_NOARP;
dev->flags |= IFF_POINTOPOINT;
dev->mtu = GPRS_PDP_MTU;
@@ -391,7 +412,7 @@
priv->conn_req.link_selector = CAIF_LINK_HIGH_BANDW;
priv->conn_req.priority = CAIF_PRIO_LOW;
/* Insert illegal value */
- priv->conn_req.sockaddr.u.dgm.connection_id = -1;
+ priv->conn_req.sockaddr.u.dgm.connection_id = 0;
priv->flowenabled = false;
init_waitqueue_head(&priv->netmgmt_wq);
@@ -453,6 +474,10 @@
pr_warn("device rtml registration failed\n");
else
list_add(&caifdev->list_field, &chnl_net_list);
+
+ /* Take ifindex as connection-id if null */
+ if (caifdev->conn_req.sockaddr.u.dgm.connection_id == 0)
+ caifdev->conn_req.sockaddr.u.dgm.connection_id = dev->ifindex;
return ret;
}
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 733d66f..094fc53 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -84,8 +84,8 @@
static struct kmem_cache *rcv_cache __read_mostly;
/* table of registered CAN protocols */
-static struct can_proto *proto_tab[CAN_NPROTO] __read_mostly;
-static DEFINE_SPINLOCK(proto_tab_lock);
+static const struct can_proto *proto_tab[CAN_NPROTO] __read_mostly;
+static DEFINE_MUTEX(proto_tab_lock);
struct timer_list can_stattimer; /* timer for statistics update */
struct s_stats can_stats; /* packet statistics */
@@ -115,11 +115,29 @@
skb_queue_purge(&sk->sk_receive_queue);
}
+static const struct can_proto *can_get_proto(int protocol)
+{
+ const struct can_proto *cp;
+
+ rcu_read_lock();
+ cp = rcu_dereference(proto_tab[protocol]);
+ if (cp && !try_module_get(cp->prot->owner))
+ cp = NULL;
+ rcu_read_unlock();
+
+ return cp;
+}
+
+static inline void can_put_proto(const struct can_proto *cp)
+{
+ module_put(cp->prot->owner);
+}
+
static int can_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
struct sock *sk;
- struct can_proto *cp;
+ const struct can_proto *cp;
int err = 0;
sock->state = SS_UNCONNECTED;
@@ -130,9 +148,12 @@
if (!net_eq(net, &init_net))
return -EAFNOSUPPORT;
+ cp = can_get_proto(protocol);
+
#ifdef CONFIG_MODULES
- /* try to load protocol module kernel is modular */
- if (!proto_tab[protocol]) {
+ if (!cp) {
+ /* try to load protocol module if kernel is modular */
+
err = request_module("can-proto-%d", protocol);
/*
@@ -143,22 +164,18 @@
if (err && printk_ratelimit())
printk(KERN_ERR "can: request_module "
"(can-proto-%d) failed.\n", protocol);
+
+ cp = can_get_proto(protocol);
}
#endif
- spin_lock(&proto_tab_lock);
- cp = proto_tab[protocol];
- if (cp && !try_module_get(cp->prot->owner))
- cp = NULL;
- spin_unlock(&proto_tab_lock);
-
/* check for available protocol and correct usage */
if (!cp)
return -EPROTONOSUPPORT;
if (cp->type != sock->type) {
- err = -EPROTONOSUPPORT;
+ err = -EPROTOTYPE;
goto errout;
}
@@ -183,7 +200,7 @@
}
errout:
- module_put(cp->prot->owner);
+ can_put_proto(cp);
return err;
}
@@ -679,7 +696,7 @@
* -EBUSY protocol already in use
* -ENOBUF if proto_register() fails
*/
-int can_proto_register(struct can_proto *cp)
+int can_proto_register(const struct can_proto *cp)
{
int proto = cp->protocol;
int err = 0;
@@ -694,15 +711,16 @@
if (err < 0)
return err;
- spin_lock(&proto_tab_lock);
+ mutex_lock(&proto_tab_lock);
+
if (proto_tab[proto]) {
printk(KERN_ERR "can: protocol %d already registered\n",
proto);
err = -EBUSY;
} else
- proto_tab[proto] = cp;
+ rcu_assign_pointer(proto_tab[proto], cp);
- spin_unlock(&proto_tab_lock);
+ mutex_unlock(&proto_tab_lock);
if (err < 0)
proto_unregister(cp->prot);
@@ -715,17 +733,16 @@
* can_proto_unregister - unregister CAN transport protocol
* @cp: pointer to CAN protocol structure
*/
-void can_proto_unregister(struct can_proto *cp)
+void can_proto_unregister(const struct can_proto *cp)
{
int proto = cp->protocol;
- spin_lock(&proto_tab_lock);
- if (!proto_tab[proto]) {
- printk(KERN_ERR "BUG: can: protocol %d is not registered\n",
- proto);
- }
- proto_tab[proto] = NULL;
- spin_unlock(&proto_tab_lock);
+ mutex_lock(&proto_tab_lock);
+ BUG_ON(proto_tab[proto] != cp);
+ rcu_assign_pointer(proto_tab[proto], NULL);
+ mutex_unlock(&proto_tab_lock);
+
+ synchronize_rcu();
proto_unregister(cp->prot);
}
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 57b1aed..cced806 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -1427,9 +1427,14 @@
static int bcm_release(struct socket *sock)
{
struct sock *sk = sock->sk;
- struct bcm_sock *bo = bcm_sk(sk);
+ struct bcm_sock *bo;
struct bcm_op *op, *next;
+ if (sk == NULL)
+ return 0;
+
+ bo = bcm_sk(sk);
+
/* remove bcm_ops, timer, rx_unregister(), etc. */
unregister_netdevice_notifier(&bo->notifier);
@@ -1596,7 +1601,7 @@
.init = bcm_init,
};
-static struct can_proto bcm_can_proto __read_mostly = {
+static const struct can_proto bcm_can_proto = {
.type = SOCK_DGRAM,
.protocol = CAN_BCM,
.ops = &bcm_ops,
diff --git a/net/can/raw.c b/net/can/raw.c
index 649acfa..dea99a6 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -305,7 +305,12 @@
static int raw_release(struct socket *sock)
{
struct sock *sk = sock->sk;
- struct raw_sock *ro = raw_sk(sk);
+ struct raw_sock *ro;
+
+ if (!sk)
+ return 0;
+
+ ro = raw_sk(sk);
unregister_netdevice_notifier(&ro->notifier);
@@ -769,7 +774,7 @@
.init = raw_init,
};
-static struct can_proto raw_can_proto __read_mostly = {
+static const struct can_proto raw_can_proto = {
.type = SOCK_RAW,
.protocol = CAN_RAW,
.ops = &raw_ops,
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 05f3578..e15a82c 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2267,6 +2267,19 @@
m->more_to_follow = false;
m->pool = NULL;
+ /* middle */
+ m->middle = NULL;
+
+ /* data */
+ m->nr_pages = 0;
+ m->page_alignment = 0;
+ m->pages = NULL;
+ m->pagelist = NULL;
+ m->bio = NULL;
+ m->bio_iter = NULL;
+ m->bio_seg = 0;
+ m->trail = NULL;
+
/* front */
if (front_len) {
if (front_len > PAGE_CACHE_SIZE) {
@@ -2286,19 +2299,6 @@
}
m->front.iov_len = front_len;
- /* middle */
- m->middle = NULL;
-
- /* data */
- m->nr_pages = 0;
- m->page_alignment = 0;
- m->pages = NULL;
- m->pagelist = NULL;
- m->bio = NULL;
- m->bio_iter = NULL;
- m->bio_seg = 0;
- m->trail = NULL;
-
dout("ceph_msg_new %p front %d\n", m, front_len);
return m;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 5a80f41..6b5dda1 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -470,8 +470,8 @@
snapc, ops,
use_mempool,
GFP_NOFS, NULL, NULL);
- if (IS_ERR(req))
- return req;
+ if (!req)
+ return NULL;
/* calculate max write size */
calc_layout(osdc, vino, layout, off, plen, req, ops);
diff --git a/net/compat.c b/net/compat.c
index 3649d58..c578d93 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -722,11 +722,11 @@
/* Argument list sizes for compat_sys_socketcall */
#define AL(x) ((x) * sizeof(u32))
-static unsigned char nas[20] = {
+static unsigned char nas[21] = {
AL(0), AL(3), AL(3), AL(3), AL(2), AL(3),
AL(3), AL(3), AL(4), AL(4), AL(4), AL(6),
AL(6), AL(2), AL(5), AL(5), AL(3), AL(3),
- AL(4), AL(5)
+ AL(4), AL(5), AL(4)
};
#undef AL
@@ -735,6 +735,13 @@
return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
}
+asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+ unsigned vlen, unsigned int flags)
+{
+ return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
+ flags | MSG_CMSG_COMPAT);
+}
+
asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
{
return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
@@ -780,7 +787,7 @@
u32 a[6];
u32 a0, a1;
- if (call < SYS_SOCKET || call > SYS_RECVMMSG)
+ if (call < SYS_SOCKET || call > SYS_SENDMMSG)
return -EINVAL;
if (copy_from_user(a, args, nas[call]))
return -EFAULT;
@@ -839,6 +846,9 @@
case SYS_SENDMSG:
ret = compat_sys_sendmsg(a0, compat_ptr(a1), a[2]);
break;
+ case SYS_SENDMMSG:
+ ret = compat_sys_sendmmsg(a0, compat_ptr(a1), a[2], a[3]);
+ break;
case SYS_RECVMSG:
ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
break;
diff --git a/net/core/dev.c b/net/core/dev.c
index c2ac599..d945379 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -948,7 +948,7 @@
}
EXPORT_SYMBOL(dev_alloc_name);
-static int dev_get_valid_name(struct net_device *dev, const char *name, bool fmt)
+static int dev_get_valid_name(struct net_device *dev, const char *name)
{
struct net *net;
@@ -958,7 +958,7 @@
if (!dev_valid_name(name))
return -EINVAL;
- if (fmt && strchr(name, '%'))
+ if (strchr(name, '%'))
return dev_alloc_name(dev, name);
else if (__dev_get_by_name(net, name))
return -EEXIST;
@@ -995,7 +995,7 @@
memcpy(oldname, dev->name, IFNAMSIZ);
- err = dev_get_valid_name(dev, newname, 1);
+ err = dev_get_valid_name(dev, newname);
if (err < 0)
return err;
@@ -1007,7 +1007,7 @@
}
write_lock_bh(&dev_base_lock);
- hlist_del(&dev->name_hlist);
+ hlist_del_rcu(&dev->name_hlist);
write_unlock_bh(&dev_base_lock);
synchronize_rcu();
@@ -1284,11 +1284,13 @@
*/
int dev_close(struct net_device *dev)
{
- LIST_HEAD(single);
+ if (dev->flags & IFF_UP) {
+ LIST_HEAD(single);
- list_add(&dev->unreg_list, &single);
- dev_close_many(&single);
- list_del(&single);
+ list_add(&dev->unreg_list, &single);
+ dev_close_many(&single);
+ list_del(&single);
+ }
return 0;
}
EXPORT_SYMBOL(dev_close);
@@ -1315,7 +1317,8 @@
return;
__ethtool_set_flags(dev, flags & ~ETH_FLAG_LRO);
- WARN_ON(dev->features & NETIF_F_LRO);
+ if (unlikely(dev->features & NETIF_F_LRO))
+ netdev_WARN(dev, "failed to disable LRO!\n");
}
EXPORT_SYMBOL(dev_disable_lro);
@@ -2502,8 +2505,8 @@
__u32 __skb_get_rxhash(struct sk_buff *skb)
{
int nhoff, hash = 0, poff;
- struct ipv6hdr *ip6;
- struct iphdr *ip;
+ const struct ipv6hdr *ip6;
+ const struct iphdr *ip;
u8 ip_proto;
u32 addr1, addr2, ihl;
union {
@@ -2518,7 +2521,7 @@
if (!pskb_may_pull(skb, sizeof(*ip) + nhoff))
goto done;
- ip = (struct iphdr *) (skb->data + nhoff);
+ ip = (const struct iphdr *) (skb->data + nhoff);
if (ip->frag_off & htons(IP_MF | IP_OFFSET))
ip_proto = 0;
else
@@ -2531,7 +2534,7 @@
if (!pskb_may_pull(skb, sizeof(*ip6) + nhoff))
goto done;
- ip6 = (struct ipv6hdr *) (skb->data + nhoff);
+ ip6 = (const struct ipv6hdr *) (skb->data + nhoff);
ip_proto = ip6->nexthdr;
addr1 = (__force u32) ip6->saddr.s6_addr32[3];
addr2 = (__force u32) ip6->daddr.s6_addr32[3];
@@ -3076,25 +3079,6 @@
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
-static void vlan_on_bond_hook(struct sk_buff *skb)
-{
- /*
- * Make sure ARP frames received on VLAN interfaces stacked on
- * bonding interfaces still make their way to any base bonding
- * device that may have registered for a specific ptype.
- */
- if (skb->dev->priv_flags & IFF_802_1Q_VLAN &&
- vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING &&
- skb->protocol == htons(ETH_P_ARP)) {
- struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
-
- if (!skb2)
- return;
- skb2->dev = vlan_dev_real_dev(skb->dev);
- netif_rx(skb2);
- }
-}
-
static int __netif_receive_skb(struct sk_buff *skb)
{
struct packet_type *ptype, *pt_prev;
@@ -3130,6 +3114,12 @@
__this_cpu_inc(softnet_data.processed);
+ if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
+ skb = vlan_untag(skb);
+ if (unlikely(!skb))
+ goto out;
+ }
+
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -3177,15 +3167,13 @@
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = NULL;
}
- if (vlan_hwaccel_do_receive(&skb)) {
+ if (vlan_do_receive(&skb)) {
ret = __netif_receive_skb(skb);
goto out;
} else if (unlikely(!skb))
goto out;
}
- vlan_on_bond_hook(skb);
-
/* deliver only exact match when indicated */
null_or_dev = deliver_exact ? skb->dev : NULL;
@@ -4510,6 +4498,30 @@
}
/**
+ * dev_ethtool_get_settings - call device's ethtool_ops::get_settings()
+ * @dev: device
+ * @cmd: memory area for ethtool_ops::get_settings() result
+ *
+ * The cmd arg is initialized properly (cleared and
+ * ethtool_cmd::cmd field set to ETHTOOL_GSET).
+ *
+ * Return device's ethtool_ops::get_settings() result value or
+ * -EOPNOTSUPP when device doesn't expose
+ * ethtool_ops::get_settings() operation.
+ */
+int dev_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+ return -EOPNOTSUPP;
+
+ memset(cmd, 0, sizeof(struct ethtool_cmd));
+ cmd->cmd = ETHTOOL_GSET;
+ return dev->ethtool_ops->get_settings(dev, cmd);
+}
+EXPORT_SYMBOL(dev_ethtool_get_settings);
+
+/**
* dev_get_flags - get flags reported to userspace
* @dev: device
*
@@ -4773,7 +4785,7 @@
* is never reached
*/
WARN_ON(1);
- err = -EINVAL;
+ err = -ENOTTY;
break;
}
@@ -5041,7 +5053,7 @@
/* Set the per device memory buffer space.
* Not applicable in our case */
case SIOCSIFLINK:
- return -EINVAL;
+ return -ENOTTY;
/*
* Unknown or private ioctl.
@@ -5062,7 +5074,7 @@
/* Take care of Wireless Extensions */
if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
return wext_handle_ioctl(net, &ifr, cmd, arg);
- return -EINVAL;
+ return -ENOTTY;
}
}
@@ -5114,7 +5126,7 @@
list_del(&dev->unreg_list);
continue;
}
-
+ dev->dismantle = true;
BUG_ON(dev->reg_state != NETREG_REGISTERED);
}
@@ -5184,27 +5196,27 @@
/* Fix illegal checksum combinations */
if ((features & NETIF_F_HW_CSUM) &&
(features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
- netdev_info(dev, "mixed HW and IP checksum settings.\n");
+ netdev_warn(dev, "mixed HW and IP checksum settings.\n");
features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM);
}
if ((features & NETIF_F_NO_CSUM) &&
(features & (NETIF_F_HW_CSUM|NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
- netdev_info(dev, "mixed no checksumming and other settings.\n");
+ netdev_warn(dev, "mixed no checksumming and other settings.\n");
features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM|NETIF_F_HW_CSUM);
}
/* Fix illegal SG+CSUM combinations. */
if ((features & NETIF_F_SG) &&
!(features & NETIF_F_ALL_CSUM)) {
- netdev_info(dev,
- "Dropping NETIF_F_SG since no checksum feature.\n");
+ netdev_dbg(dev,
+ "Dropping NETIF_F_SG since no checksum feature.\n");
features &= ~NETIF_F_SG;
}
/* TSO requires that SG is present as well. */
if ((features & NETIF_F_ALL_TSO) && !(features & NETIF_F_SG)) {
- netdev_info(dev, "Dropping TSO features since no SG feature.\n");
+ netdev_dbg(dev, "Dropping TSO features since no SG feature.\n");
features &= ~NETIF_F_ALL_TSO;
}
@@ -5214,7 +5226,7 @@
/* Software GSO depends on SG. */
if ((features & NETIF_F_GSO) && !(features & NETIF_F_SG)) {
- netdev_info(dev, "Dropping NETIF_F_GSO since no SG feature.\n");
+ netdev_dbg(dev, "Dropping NETIF_F_GSO since no SG feature.\n");
features &= ~NETIF_F_GSO;
}
@@ -5224,13 +5236,13 @@
if (!((features & NETIF_F_GEN_CSUM) ||
(features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))
== (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
- netdev_info(dev,
+ netdev_dbg(dev,
"Dropping NETIF_F_UFO since no checksum offload features.\n");
features &= ~NETIF_F_UFO;
}
if (!(features & NETIF_F_SG)) {
- netdev_info(dev,
+ netdev_dbg(dev,
"Dropping NETIF_F_UFO since no NETIF_F_SG feature.\n");
features &= ~NETIF_F_UFO;
}
@@ -5240,11 +5252,13 @@
}
EXPORT_SYMBOL(netdev_fix_features);
-void netdev_update_features(struct net_device *dev)
+int __netdev_update_features(struct net_device *dev)
{
u32 features;
int err = 0;
+ ASSERT_RTNL();
+
features = netdev_get_wanted_features(dev);
if (dev->netdev_ops->ndo_fix_features)
@@ -5254,24 +5268,60 @@
features = netdev_fix_features(dev, features);
if (dev->features == features)
- return;
+ return 0;
- netdev_info(dev, "Features changed: 0x%08x -> 0x%08x\n",
+ netdev_dbg(dev, "Features changed: 0x%08x -> 0x%08x\n",
dev->features, features);
if (dev->netdev_ops->ndo_set_features)
err = dev->netdev_ops->ndo_set_features(dev, features);
- if (!err)
- dev->features = features;
- else if (err < 0)
+ if (unlikely(err < 0)) {
netdev_err(dev,
"set_features() failed (%d); wanted 0x%08x, left 0x%08x\n",
err, features, dev->features);
+ return -1;
+ }
+
+ if (!err)
+ dev->features = features;
+
+ return 1;
+}
+
+/**
+ * netdev_update_features - recalculate device features
+ * @dev: the device to check
+ *
+ * Recalculate dev->features set and send notifications if it
+ * has changed. Should be called after driver or hardware dependent
+ * conditions might have changed that influence the features.
+ */
+void netdev_update_features(struct net_device *dev)
+{
+ if (__netdev_update_features(dev))
+ netdev_features_change(dev);
}
EXPORT_SYMBOL(netdev_update_features);
/**
+ * netdev_change_features - recalculate device features
+ * @dev: the device to check
+ *
+ * Recalculate dev->features set and send notifications even
+ * if they have not changed. Should be called instead of
+ * netdev_update_features() if also dev->vlan_features might
+ * have changed to allow the changes to be propagated to stacked
+ * VLAN devices.
+ */
+void netdev_change_features(struct net_device *dev)
+{
+ __netdev_update_features(dev);
+ netdev_features_change(dev);
+}
+EXPORT_SYMBOL(netdev_change_features);
+
+/**
* netif_stacked_transfer_operstate - transfer operstate
* @rootdev: the root or lower level device to transfer state from
* @dev: the device to transfer operstate to
@@ -5387,6 +5437,10 @@
dev->iflink = -1;
+ ret = dev_get_valid_name(dev, dev->name);
+ if (ret < 0)
+ goto out;
+
/* Init, if this function is available */
if (dev->netdev_ops->ndo_init) {
ret = dev->netdev_ops->ndo_init(dev);
@@ -5397,10 +5451,6 @@
}
}
- ret = dev_get_valid_name(dev, dev->name, 0);
- if (ret)
- goto err_uninit;
-
dev->ifindex = dev_new_index(net);
if (dev->iflink == -1)
dev->iflink = dev->ifindex;
@@ -5412,10 +5462,12 @@
dev->features |= NETIF_F_SOFT_FEATURES;
dev->wanted_features = dev->features & dev->hw_features;
- /* Avoid warning from netdev_fix_features() for GSO without SG */
- if (!(dev->wanted_features & NETIF_F_SG)) {
- dev->wanted_features &= ~NETIF_F_GSO;
- dev->features &= ~NETIF_F_GSO;
+ /* Turn on no cache copy if HW is doing checksum */
+ dev->hw_features |= NETIF_F_NOCACHE_COPY;
+ if ((dev->features & NETIF_F_ALL_CSUM) &&
+ !(dev->features & NETIF_F_NO_CSUM)) {
+ dev->wanted_features |= NETIF_F_NOCACHE_COPY;
+ dev->features |= NETIF_F_NOCACHE_COPY;
}
/* Enable GRO and NETIF_F_HIGHDMA for vlans by default,
@@ -5434,7 +5486,7 @@
goto err_uninit;
dev->reg_state = NETREG_REGISTERED;
- netdev_update_features(dev);
+ __netdev_update_features(dev);
/*
* Default initial state at registry is that the
@@ -5531,19 +5583,7 @@
int err;
rtnl_lock();
-
- /*
- * If the name is a format string the caller wants us to do a
- * name allocation.
- */
- if (strchr(dev->name, '%')) {
- err = dev_alloc_name(dev, dev->name);
- if (err < 0)
- goto out;
- }
-
err = register_netdevice(dev);
-out:
rtnl_unlock();
return err;
}
@@ -6025,7 +6065,7 @@
/* We get here if we can't use the current device name */
if (!pat)
goto out;
- if (dev_get_valid_name(dev, pat, 1))
+ if (dev_get_valid_name(dev, pat) < 0)
goto out;
}
@@ -6157,29 +6197,20 @@
*/
u32 netdev_increment_features(u32 all, u32 one, u32 mask)
{
+ if (mask & NETIF_F_GEN_CSUM)
+ mask |= NETIF_F_ALL_CSUM;
+ mask |= NETIF_F_VLAN_CHALLENGED;
+
+ all |= one & (NETIF_F_ONE_FOR_ALL|NETIF_F_ALL_CSUM) & mask;
+ all &= one | ~NETIF_F_ALL_FOR_ALL;
+
/* If device needs checksumming, downgrade to it. */
- if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
- all ^= NETIF_F_NO_CSUM | (one & NETIF_F_ALL_CSUM);
- else if (mask & NETIF_F_ALL_CSUM) {
- /* If one device supports v4/v6 checksumming, set for all. */
- if (one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) &&
- !(all & NETIF_F_GEN_CSUM)) {
- all &= ~NETIF_F_ALL_CSUM;
- all |= one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
- }
+ if (all & (NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM))
+ all &= ~NETIF_F_NO_CSUM;
- /* If one device supports hw checksumming, set for all. */
- if (one & NETIF_F_GEN_CSUM && !(all & NETIF_F_GEN_CSUM)) {
- all &= ~NETIF_F_ALL_CSUM;
- all |= NETIF_F_HW_CSUM;
- }
- }
-
- one |= NETIF_F_ALL_CSUM;
-
- one |= all & NETIF_F_ONE_FOR_ALL;
- all &= one | NETIF_F_LLTX | NETIF_F_GSO | NETIF_F_UFO;
- all |= one & mask & NETIF_F_ONE_FOR_ALL;
+ /* If one device supports hw checksumming, set for all. */
+ if (all & NETIF_F_GEN_CSUM)
+ all &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_GEN_CSUM);
return all;
}
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 7b39f3e..e2e6693 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -68,14 +68,6 @@
return __hw_addr_add_ex(list, addr, addr_len, addr_type, false);
}
-static void ha_rcu_free(struct rcu_head *head)
-{
- struct netdev_hw_addr *ha;
-
- ha = container_of(head, struct netdev_hw_addr, rcu_head);
- kfree(ha);
-}
-
static int __hw_addr_del_ex(struct netdev_hw_addr_list *list,
unsigned char *addr, int addr_len,
unsigned char addr_type, bool global)
@@ -94,7 +86,7 @@
if (--ha->refcount)
return 0;
list_del_rcu(&ha->list);
- call_rcu(&ha->rcu_head, ha_rcu_free);
+ kfree_rcu(ha, rcu_head);
list->count--;
return 0;
}
@@ -197,7 +189,7 @@
list_for_each_entry_safe(ha, tmp, &list->list, list) {
list_del_rcu(&ha->list);
- call_rcu(&ha->rcu_head, ha_rcu_free);
+ kfree_rcu(ha, rcu_head);
}
list->count = 0;
}
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 706502f..7f36b38 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -207,14 +207,6 @@
rcu_read_unlock();
}
-
-static void free_dm_hw_stat(struct rcu_head *head)
-{
- struct dm_hw_stat_delta *n;
- n = container_of(head, struct dm_hw_stat_delta, rcu);
- kfree(n);
-}
-
static int set_all_monitor_traces(int state)
{
int rc = 0;
@@ -245,7 +237,7 @@
list_for_each_entry_safe(new_stat, temp, &hw_stats_list, list) {
if (new_stat->dev == NULL) {
list_del_rcu(&new_stat->list);
- call_rcu(&new_stat->rcu, free_dm_hw_stat);
+ kfree_rcu(new_stat, rcu);
}
}
break;
@@ -314,7 +306,7 @@
new_stat->dev = NULL;
if (trace_state == TRACE_OFF) {
list_del_rcu(&new_stat->list);
- call_rcu(&new_stat->rcu, free_dm_hw_stat);
+ kfree_rcu(new_stat, rcu);
break;
}
}
diff --git a/net/core/dst.c b/net/core/dst.c
index 91104d3..81a4fa1 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -19,6 +19,7 @@
#include <linux/types.h>
#include <net/net_namespace.h>
#include <linux/sched.h>
+#include <linux/prefetch.h>
#include <net/dst.h>
@@ -33,9 +34,6 @@
* 3) This list is guarded by a mutex,
* so that the gc_task and dst_dev_event() can be synchronized.
*/
-#if RT_CACHE_DEBUG >= 2
-static atomic_t dst_total = ATOMIC_INIT(0);
-#endif
/*
* We want to keep lock & list close together
@@ -69,10 +67,6 @@
unsigned long expires = ~0L;
struct dst_entry *dst, *next, head;
struct dst_entry *last = &head;
-#if RT_CACHE_DEBUG >= 2
- ktime_t time_start = ktime_get();
- struct timespec elapsed;
-#endif
mutex_lock(&dst_gc_mutex);
next = dst_busy_list;
@@ -146,15 +140,6 @@
spin_unlock_bh(&dst_garbage.lock);
mutex_unlock(&dst_gc_mutex);
-#if RT_CACHE_DEBUG >= 2
- elapsed = ktime_to_timespec(ktime_sub(ktime_get(), time_start));
- printk(KERN_DEBUG "dst_total: %d delayed: %d work_perf: %d"
- " expires: %lu elapsed: %lu us\n",
- atomic_read(&dst_total), delayed, work_performed,
- expires,
- elapsed.tv_sec * USEC_PER_SEC +
- elapsed.tv_nsec / NSEC_PER_USEC);
-#endif
}
int dst_discard(struct sk_buff *skb)
@@ -166,7 +151,8 @@
const u32 dst_default_metrics[RTAX_MAX];
-void *dst_alloc(struct dst_ops *ops, int initial_ref)
+void *dst_alloc(struct dst_ops *ops, struct net_device *dev,
+ int initial_ref, int initial_obsolete, int flags)
{
struct dst_entry *dst;
@@ -174,18 +160,36 @@
if (ops->gc(ops))
return NULL;
}
- dst = kmem_cache_zalloc(ops->kmem_cachep, GFP_ATOMIC);
+ dst = kmem_cache_alloc(ops->kmem_cachep, GFP_ATOMIC);
if (!dst)
return NULL;
- atomic_set(&dst->__refcnt, initial_ref);
+ dst->child = NULL;
+ dst->dev = dev;
+ if (dev)
+ dev_hold(dev);
dst->ops = ops;
- dst->lastuse = jiffies;
- dst->path = dst;
- dst->input = dst->output = dst_discard;
dst_init_metrics(dst, dst_default_metrics, true);
-#if RT_CACHE_DEBUG >= 2
- atomic_inc(&dst_total);
+ dst->expires = 0UL;
+ dst->path = dst;
+ dst->neighbour = NULL;
+ dst->hh = NULL;
+#ifdef CONFIG_XFRM
+ dst->xfrm = NULL;
#endif
+ dst->input = dst_discard;
+ dst->output = dst_discard;
+ dst->error = 0;
+ dst->obsolete = initial_obsolete;
+ dst->header_len = 0;
+ dst->trailer_len = 0;
+#ifdef CONFIG_IP_ROUTE_CLASSID
+ dst->tclassid = 0;
+#endif
+ atomic_set(&dst->__refcnt, initial_ref);
+ dst->__use = 0;
+ dst->lastuse = jiffies;
+ dst->flags = flags;
+ dst->next = NULL;
dst_entries_add(ops, 1);
return dst;
}
@@ -245,9 +249,6 @@
dst->ops->destroy(dst);
if (dst->dev)
dev_put(dst->dev);
-#if RT_CACHE_DEBUG >= 2
- atomic_dec(&dst_total);
-#endif
kmem_cache_free(dst->ops->kmem_cachep, dst);
dst = child;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 74ead9e..84e7304 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -21,6 +21,8 @@
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/sched.h>
/*
* Some useful ethtool_ops methods that're device independent.
@@ -317,7 +319,7 @@
dev->wanted_features &= ~features[0].valid;
dev->wanted_features |= features[0].valid & features[0].requested;
- netdev_update_features(dev);
+ __netdev_update_features(dev);
if ((dev->wanted_features ^ dev->features) & features[0].valid)
ret |= ETHTOOL_F_WISH;
@@ -330,7 +332,7 @@
/* NETIF_F_IP_CSUM */ "tx-checksum-ipv4",
/* NETIF_F_NO_CSUM */ "tx-checksum-unneeded",
/* NETIF_F_HW_CSUM */ "tx-checksum-ip-generic",
- /* NETIF_F_IPV6_CSUM */ "tx_checksum-ipv6",
+ /* NETIF_F_IPV6_CSUM */ "tx-checksum-ipv6",
/* NETIF_F_HIGHDMA */ "highdma",
/* NETIF_F_FRAGLIST */ "tx-scatter-gather-fraglist",
/* NETIF_F_HW_VLAN_TX */ "tx-vlan-hw-insert",
@@ -359,8 +361,8 @@
/* NETIF_F_NTUPLE */ "rx-ntuple-filter",
/* NETIF_F_RXHASH */ "rx-hashing",
/* NETIF_F_RXCSUM */ "rx-checksum",
- "",
- "",
+ /* NETIF_F_NOCACHE_COPY */ "tx-nocache-copy",
+ /* NETIF_F_LOOPBACK */ "loopback",
};
static int __ethtool_get_sset_count(struct net_device *dev, int sset)
@@ -499,7 +501,7 @@
else
dev->wanted_features &= ~mask;
- netdev_update_features(dev);
+ __netdev_update_features(dev);
return 0;
}
@@ -544,14 +546,14 @@
}
/* allow changing only bits set in hw_features */
- changed = (data ^ dev->wanted_features) & flags_dup_features;
+ changed = (data ^ dev->features) & flags_dup_features;
if (changed & ~dev->hw_features)
return (changed & dev->hw_features) ? -EINVAL : -EOPNOTSUPP;
dev->wanted_features =
- (dev->wanted_features & ~changed) | data;
+ (dev->wanted_features & ~changed) | (data & dev->hw_features);
- netdev_update_features(dev);
+ __netdev_update_features(dev);
return 0;
}
@@ -908,6 +910,9 @@
struct ethtool_rx_ntuple_flow_spec_container *fsc = NULL;
int ret;
+ if (!ops->set_rx_ntuple)
+ return -EOPNOTSUPP;
+
if (!(dev->features & NETIF_F_NTUPLE))
return -EINVAL;
@@ -1441,6 +1446,35 @@
return dev->ethtool_ops->set_ringparam(dev, &ringparam);
}
+static noinline_for_stack int ethtool_get_channels(struct net_device *dev,
+ void __user *useraddr)
+{
+ struct ethtool_channels channels = { .cmd = ETHTOOL_GCHANNELS };
+
+ if (!dev->ethtool_ops->get_channels)
+ return -EOPNOTSUPP;
+
+ dev->ethtool_ops->get_channels(dev, &channels);
+
+ if (copy_to_user(useraddr, &channels, sizeof(channels)))
+ return -EFAULT;
+ return 0;
+}
+
+static noinline_for_stack int ethtool_set_channels(struct net_device *dev,
+ void __user *useraddr)
+{
+ struct ethtool_channels channels;
+
+ if (!dev->ethtool_ops->set_channels)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&channels, useraddr, sizeof(channels)))
+ return -EFAULT;
+
+ return dev->ethtool_ops->set_channels(dev, &channels);
+}
+
static int ethtool_get_pauseparam(struct net_device *dev, void __user *useraddr)
{
struct ethtool_pauseparam pauseparam = { ETHTOOL_GPAUSEPARAM };
@@ -1618,14 +1652,60 @@
static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
{
struct ethtool_value id;
+ static bool busy;
+ int rc;
- if (!dev->ethtool_ops->phys_id)
+ if (!dev->ethtool_ops->set_phys_id)
return -EOPNOTSUPP;
+ if (busy)
+ return -EBUSY;
+
if (copy_from_user(&id, useraddr, sizeof(id)))
return -EFAULT;
- return dev->ethtool_ops->phys_id(dev, id.data);
+ rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
+ if (rc < 0)
+ return rc;
+
+ /* Drop the RTNL lock while waiting, but prevent reentry or
+ * removal of the device.
+ */
+ busy = true;
+ dev_hold(dev);
+ rtnl_unlock();
+
+ if (rc == 0) {
+ /* Driver will handle this itself */
+ schedule_timeout_interruptible(
+ id.data ? (id.data * HZ) : MAX_SCHEDULE_TIMEOUT);
+ } else {
+ /* Driver expects to be called at twice the frequency in rc */
+ int n = rc * 2, i, interval = HZ / n;
+
+ /* Count down seconds */
+ do {
+ /* Count down iterations per second */
+ i = n;
+ do {
+ rtnl_lock();
+ rc = dev->ethtool_ops->set_phys_id(dev,
+ (i & 1) ? ETHTOOL_ID_OFF : ETHTOOL_ID_ON);
+ rtnl_unlock();
+ if (rc)
+ break;
+ schedule_timeout_interruptible(interval);
+ } while (!signal_pending(current) && --i != 0);
+ } while (!signal_pending(current) &&
+ (id.data == 0 || --id.data != 0));
+ }
+
+ rtnl_lock();
+ dev_put(dev);
+ busy = false;
+
+ (void)dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE);
+ return rc;
}
static int ethtool_get_stats(struct net_device *dev, void __user *useraddr)
@@ -1743,6 +1823,87 @@
return dev->ethtool_ops->flash_device(dev, &efl);
}
+static int ethtool_set_dump(struct net_device *dev,
+ void __user *useraddr)
+{
+ struct ethtool_dump dump;
+
+ if (!dev->ethtool_ops->set_dump)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&dump, useraddr, sizeof(dump)))
+ return -EFAULT;
+
+ return dev->ethtool_ops->set_dump(dev, &dump);
+}
+
+static int ethtool_get_dump_flag(struct net_device *dev,
+ void __user *useraddr)
+{
+ int ret;
+ struct ethtool_dump dump;
+ const struct ethtool_ops *ops = dev->ethtool_ops;
+
+ if (!dev->ethtool_ops->get_dump_flag)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&dump, useraddr, sizeof(dump)))
+ return -EFAULT;
+
+ ret = ops->get_dump_flag(dev, &dump);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(useraddr, &dump, sizeof(dump)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_get_dump_data(struct net_device *dev,
+ void __user *useraddr)
+{
+ int ret;
+ __u32 len;
+ struct ethtool_dump dump, tmp;
+ const struct ethtool_ops *ops = dev->ethtool_ops;
+ void *data = NULL;
+
+ if (!dev->ethtool_ops->get_dump_data ||
+ !dev->ethtool_ops->get_dump_flag)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&dump, useraddr, sizeof(dump)))
+ return -EFAULT;
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.cmd = ETHTOOL_GET_DUMP_FLAG;
+ ret = ops->get_dump_flag(dev, &tmp);
+ if (ret)
+ return ret;
+
+ len = (tmp.len > dump.len) ? dump.len : tmp.len;
+ if (!len)
+ return -EFAULT;
+
+ data = vzalloc(tmp.len);
+ if (!data)
+ return -ENOMEM;
+ ret = ops->get_dump_data(dev, &dump, data);
+ if (ret)
+ goto out;
+
+ if (copy_to_user(useraddr, &dump, sizeof(dump))) {
+ ret = -EFAULT;
+ goto out;
+ }
+ useraddr += offsetof(struct ethtool_dump, data);
+ if (copy_to_user(useraddr, data, len))
+ ret = -EFAULT;
+out:
+ vfree(data);
+ return ret;
+}
+
/* The main entry point in this file. Called from net/core/dev.c */
int dev_ethtool(struct net *net, struct ifreq *ifr)
@@ -1953,6 +2114,21 @@
case ETHTOOL_SGRO:
rc = ethtool_set_one_feature(dev, useraddr, ethcmd);
break;
+ case ETHTOOL_GCHANNELS:
+ rc = ethtool_get_channels(dev, useraddr);
+ break;
+ case ETHTOOL_SCHANNELS:
+ rc = ethtool_set_channels(dev, useraddr);
+ break;
+ case ETHTOOL_SET_DUMP:
+ rc = ethtool_set_dump(dev, useraddr);
+ break;
+ case ETHTOOL_GET_DUMP_FLAG:
+ rc = ethtool_get_dump_flag(dev, useraddr);
+ break;
+ case ETHTOOL_GET_DUMP_DATA:
+ rc = ethtool_get_dump_data(dev, useraddr);
+ break;
default:
rc = -EOPNOTSUPP;
}
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 8248ebb..3911586 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -590,7 +590,8 @@
int idx = 0;
struct fib_rule *rule;
- list_for_each_entry(rule, &ops->rules_list, list) {
+ rcu_read_lock();
+ list_for_each_entry_rcu(rule, &ops->rules_list, list) {
if (idx < cb->args[1])
goto skip;
diff --git a/net/core/filter.c b/net/core/filter.c
index afb8afb..0eb8c44 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -39,65 +39,6 @@
#include <linux/filter.h>
#include <linux/reciprocal_div.h>
-enum {
- BPF_S_RET_K = 1,
- BPF_S_RET_A,
- BPF_S_ALU_ADD_K,
- BPF_S_ALU_ADD_X,
- BPF_S_ALU_SUB_K,
- BPF_S_ALU_SUB_X,
- BPF_S_ALU_MUL_K,
- BPF_S_ALU_MUL_X,
- BPF_S_ALU_DIV_X,
- BPF_S_ALU_AND_K,
- BPF_S_ALU_AND_X,
- BPF_S_ALU_OR_K,
- BPF_S_ALU_OR_X,
- BPF_S_ALU_LSH_K,
- BPF_S_ALU_LSH_X,
- BPF_S_ALU_RSH_K,
- BPF_S_ALU_RSH_X,
- BPF_S_ALU_NEG,
- BPF_S_LD_W_ABS,
- BPF_S_LD_H_ABS,
- BPF_S_LD_B_ABS,
- BPF_S_LD_W_LEN,
- BPF_S_LD_W_IND,
- BPF_S_LD_H_IND,
- BPF_S_LD_B_IND,
- BPF_S_LD_IMM,
- BPF_S_LDX_W_LEN,
- BPF_S_LDX_B_MSH,
- BPF_S_LDX_IMM,
- BPF_S_MISC_TAX,
- BPF_S_MISC_TXA,
- BPF_S_ALU_DIV_K,
- BPF_S_LD_MEM,
- BPF_S_LDX_MEM,
- BPF_S_ST,
- BPF_S_STX,
- BPF_S_JMP_JA,
- BPF_S_JMP_JEQ_K,
- BPF_S_JMP_JEQ_X,
- BPF_S_JMP_JGE_K,
- BPF_S_JMP_JGE_X,
- BPF_S_JMP_JGT_K,
- BPF_S_JMP_JGT_X,
- BPF_S_JMP_JSET_K,
- BPF_S_JMP_JSET_X,
- /* Ancillary data */
- BPF_S_ANC_PROTOCOL,
- BPF_S_ANC_PKTTYPE,
- BPF_S_ANC_IFINDEX,
- BPF_S_ANC_NLATTR,
- BPF_S_ANC_NLATTR_NEST,
- BPF_S_ANC_MARK,
- BPF_S_ANC_QUEUE,
- BPF_S_ANC_HATYPE,
- BPF_S_ANC_RXHASH,
- BPF_S_ANC_CPU,
-};
-
/* No hurry in this branch */
static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size)
{
@@ -145,7 +86,7 @@
rcu_read_lock();
filter = rcu_dereference(sk->sk_filter);
if (filter) {
- unsigned int pkt_len = sk_run_filter(skb, filter->insns);
+ unsigned int pkt_len = SK_RUN_FILTER(filter, skb);
err = pkt_len ? pskb_trim(skb, pkt_len) : -EPERM;
}
@@ -638,6 +579,7 @@
{
struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
+ bpf_jit_free(fp);
kfree(fp);
}
EXPORT_SYMBOL(sk_filter_release_rcu);
@@ -672,6 +614,7 @@
atomic_set(&fp->refcnt, 1);
fp->len = fprog->len;
+ fp->bpf_func = sk_run_filter;
err = sk_chk_filter(fp->insns, fp->len);
if (err) {
@@ -679,6 +622,8 @@
return err;
}
+ bpf_jit_compile(fp);
+
old_fp = rcu_dereference_protected(sk->sk_filter,
sock_owned_by_user(sk));
rcu_assign_pointer(sk->sk_filter, fp);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 7c23733..43b03dd 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -249,13 +249,6 @@
}
EXPORT_SYMBOL(gen_new_estimator);
-static void __gen_kill_estimator(struct rcu_head *head)
-{
- struct gen_estimator *e = container_of(head,
- struct gen_estimator, e_rcu);
- kfree(e);
-}
-
/**
* gen_kill_estimator - remove a rate estimator
* @bstats: basic statistics
@@ -279,7 +272,7 @@
write_unlock(&est_lock);
list_del_rcu(&e->list);
- call_rcu(&e->e_rcu, __gen_kill_estimator);
+ kfree_rcu(e, e_rcu);
}
spin_unlock_bh(&est_tree_lock);
}
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 5ceb257..11b98bc 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -28,6 +28,7 @@
static const char fmt_hex[] = "%#x\n";
static const char fmt_long_hex[] = "%#lx\n";
static const char fmt_dec[] = "%d\n";
+static const char fmt_udec[] = "%u\n";
static const char fmt_ulong[] = "%lu\n";
static const char fmt_u64[] = "%llu\n";
@@ -145,13 +146,10 @@
if (!rtnl_trylock())
return restart_syscall();
- if (netif_running(netdev) &&
- netdev->ethtool_ops &&
- netdev->ethtool_ops->get_settings) {
- struct ethtool_cmd cmd = { ETHTOOL_GSET };
-
- if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
- ret = sprintf(buf, fmt_dec, ethtool_cmd_speed(&cmd));
+ if (netif_running(netdev)) {
+ struct ethtool_cmd cmd;
+ if (!dev_ethtool_get_settings(netdev, &cmd))
+ ret = sprintf(buf, fmt_udec, ethtool_cmd_speed(&cmd));
}
rtnl_unlock();
return ret;
@@ -166,13 +164,11 @@
if (!rtnl_trylock())
return restart_syscall();
- if (netif_running(netdev) &&
- netdev->ethtool_ops &&
- netdev->ethtool_ops->get_settings) {
- struct ethtool_cmd cmd = { ETHTOOL_GSET };
-
- if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
- ret = sprintf(buf, "%s\n", cmd.duplex ? "full" : "half");
+ if (netif_running(netdev)) {
+ struct ethtool_cmd cmd;
+ if (!dev_ethtool_get_settings(netdev, &cmd))
+ ret = sprintf(buf, "%s\n",
+ cmd.duplex ? "full" : "half");
}
rtnl_unlock();
return ret;
@@ -565,13 +561,6 @@
return len;
}
-static void rps_map_release(struct rcu_head *rcu)
-{
- struct rps_map *map = container_of(rcu, struct rps_map, rcu);
-
- kfree(map);
-}
-
static ssize_t store_rps_map(struct netdev_rx_queue *queue,
struct rx_queue_attribute *attribute,
const char *buf, size_t len)
@@ -619,7 +608,7 @@
spin_unlock(&rps_map_lock);
if (old_map)
- call_rcu(&old_map->rcu, rps_map_release);
+ kfree_rcu(old_map, rcu);
free_cpumask_var(mask);
return len;
@@ -728,7 +717,7 @@
map = rcu_dereference_raw(queue->rps_map);
if (map) {
RCU_INIT_POINTER(queue->rps_map, NULL);
- call_rcu(&map->rcu, rps_map_release);
+ kfree_rcu(map, rcu);
}
flow_table = rcu_dereference_raw(queue->rps_flow_table);
@@ -898,21 +887,6 @@
return len;
}
-static void xps_map_release(struct rcu_head *rcu)
-{
- struct xps_map *map = container_of(rcu, struct xps_map, rcu);
-
- kfree(map);
-}
-
-static void xps_dev_maps_release(struct rcu_head *rcu)
-{
- struct xps_dev_maps *dev_maps =
- container_of(rcu, struct xps_dev_maps, rcu);
-
- kfree(dev_maps);
-}
-
static DEFINE_MUTEX(xps_map_mutex);
#define xmap_dereference(P) \
rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex))
@@ -968,7 +942,7 @@
} else
pos = map_len = alloc_len = 0;
- need_set = cpu_isset(cpu, *mask) && cpu_online(cpu);
+ need_set = cpumask_test_cpu(cpu, mask) && cpu_online(cpu);
#ifdef CONFIG_NUMA
if (need_set) {
if (numa_node == -2)
@@ -1009,7 +983,7 @@
map = dev_maps ?
xmap_dereference(dev_maps->cpu_map[cpu]) : NULL;
if (map && xmap_dereference(new_dev_maps->cpu_map[cpu]) != map)
- call_rcu(&map->rcu, xps_map_release);
+ kfree_rcu(map, rcu);
if (new_dev_maps->cpu_map[cpu])
nonempty = 1;
}
@@ -1022,7 +996,7 @@
}
if (dev_maps)
- call_rcu(&dev_maps->rcu, xps_dev_maps_release);
+ kfree_rcu(dev_maps, rcu);
netdev_queue_numa_node_write(queue, (numa_node >= 0) ? numa_node :
NUMA_NO_NODE);
@@ -1084,7 +1058,7 @@
else {
RCU_INIT_POINTER(dev_maps->cpu_map[i],
NULL);
- call_rcu(&map->rcu, xps_map_release);
+ kfree_rcu(map, rcu);
map = NULL;
}
}
@@ -1094,7 +1068,7 @@
if (!nonempty) {
RCU_INIT_POINTER(dev->xps_maps, NULL);
- call_rcu(&dev_maps->rcu, xps_dev_maps_release);
+ kfree_rcu(dev_maps, rcu);
}
}
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 3f86026..2e2dce6 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -27,14 +27,6 @@
#define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */
-static void net_generic_release(struct rcu_head *rcu)
-{
- struct net_generic *ng;
-
- ng = container_of(rcu, struct net_generic, rcu);
- kfree(ng);
-}
-
static int net_assign_generic(struct net *net, int id, void *data)
{
struct net_generic *ng, *old_ng;
@@ -68,7 +60,7 @@
memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
rcu_assign_pointer(net->gen, ng);
- call_rcu(&old_ng->rcu, net_generic_release);
+ kfree_rcu(old_ng, rcu);
assign:
ng->ptr[id - 1] = data;
return 0;
@@ -216,11 +208,14 @@
kmem_cache_free(net_cachep, net);
}
-static struct net *net_create(void)
+struct net *copy_net_ns(unsigned long flags, struct net *old_net)
{
struct net *net;
int rv;
+ if (!(flags & CLONE_NEWNET))
+ return get_net(old_net);
+
net = net_alloc();
if (!net)
return ERR_PTR(-ENOMEM);
@@ -239,13 +234,6 @@
return net;
}
-struct net *copy_net_ns(unsigned long flags, struct net *old_net)
-{
- if (!(flags & CLONE_NEWNET))
- return get_net(old_net);
- return net_create();
-}
-
static DEFINE_SPINLOCK(cleanup_list_lock);
static LIST_HEAD(cleanup_list); /* Must hold cleanup_list_lock to touch */
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 06be243..2d7d6d4 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -539,7 +539,7 @@
{
int proto, len, ulen;
int hits = 0;
- struct iphdr *iph;
+ const struct iphdr *iph;
struct udphdr *uh;
struct netpoll_info *npinfo = skb->dev->npinfo;
struct netpoll *np, *tmp;
@@ -698,32 +698,8 @@
if (*cur != 0) {
/* MAC address */
- if ((delim = strchr(cur, ':')) == NULL)
+ if (!mac_pton(cur, np->remote_mac))
goto parse_failed;
- *delim = 0;
- np->remote_mac[0] = simple_strtol(cur, NULL, 16);
- cur = delim + 1;
- if ((delim = strchr(cur, ':')) == NULL)
- goto parse_failed;
- *delim = 0;
- np->remote_mac[1] = simple_strtol(cur, NULL, 16);
- cur = delim + 1;
- if ((delim = strchr(cur, ':')) == NULL)
- goto parse_failed;
- *delim = 0;
- np->remote_mac[2] = simple_strtol(cur, NULL, 16);
- cur = delim + 1;
- if ((delim = strchr(cur, ':')) == NULL)
- goto parse_failed;
- *delim = 0;
- np->remote_mac[3] = simple_strtol(cur, NULL, 16);
- cur = delim + 1;
- if ((delim = strchr(cur, ':')) == NULL)
- goto parse_failed;
- *delim = 0;
- np->remote_mac[4] = simple_strtol(cur, NULL, 16);
- cur = delim + 1;
- np->remote_mac[5] = simple_strtol(cur, NULL, 16);
}
netpoll_print_options(np);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index aeeece7..67870e9 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -156,6 +156,7 @@
#include <linux/wait.h>
#include <linux/etherdevice.h>
#include <linux/kthread.h>
+#include <linux/prefetch.h>
#include <net/net_namespace.h>
#include <net/checksum.h>
#include <net/ipv6.h>
@@ -449,7 +450,6 @@
static void pktgen_clear_counters(struct pktgen_dev *pkt_dev);
static unsigned int scan_ip6(const char *s, char ip[16]);
-static unsigned int fmt_ip6(char *s, const char ip[16]);
/* Module parameters, defaults. */
static int pg_count_d __read_mostly = 1000;
@@ -556,21 +556,13 @@
pkt_dev->skb_priority);
if (pkt_dev->flags & F_IPV6) {
- char b1[128], b2[128], b3[128];
- fmt_ip6(b1, pkt_dev->in6_saddr.s6_addr);
- fmt_ip6(b2, pkt_dev->min_in6_saddr.s6_addr);
- fmt_ip6(b3, pkt_dev->max_in6_saddr.s6_addr);
seq_printf(seq,
- " saddr: %s min_saddr: %s max_saddr: %s\n", b1,
- b2, b3);
-
- fmt_ip6(b1, pkt_dev->in6_daddr.s6_addr);
- fmt_ip6(b2, pkt_dev->min_in6_daddr.s6_addr);
- fmt_ip6(b3, pkt_dev->max_in6_daddr.s6_addr);
- seq_printf(seq,
- " daddr: %s min_daddr: %s max_daddr: %s\n", b1,
- b2, b3);
-
+ " saddr: %pI6c min_saddr: %pI6c max_saddr: %pI6c\n"
+ " daddr: %pI6c min_daddr: %pI6c max_daddr: %pI6c\n",
+ &pkt_dev->in6_saddr,
+ &pkt_dev->min_in6_saddr, &pkt_dev->max_in6_saddr,
+ &pkt_dev->in6_daddr,
+ &pkt_dev->min_in6_daddr, &pkt_dev->max_in6_daddr);
} else {
seq_printf(seq,
" dst_min: %s dst_max: %s\n",
@@ -706,10 +698,9 @@
pkt_dev->cur_src_mac_offset);
if (pkt_dev->flags & F_IPV6) {
- char b1[128], b2[128];
- fmt_ip6(b1, pkt_dev->cur_in6_daddr.s6_addr);
- fmt_ip6(b2, pkt_dev->cur_in6_saddr.s6_addr);
- seq_printf(seq, " cur_saddr: %s cur_daddr: %s\n", b2, b1);
+ seq_printf(seq, " cur_saddr: %pI6c cur_daddr: %pI6c\n",
+ &pkt_dev->cur_in6_saddr,
+ &pkt_dev->cur_in6_daddr);
} else
seq_printf(seq, " cur_saddr: 0x%x cur_daddr: 0x%x\n",
pkt_dev->cur_saddr, pkt_dev->cur_daddr);
@@ -1309,7 +1300,7 @@
buf[len] = 0;
scan_ip6(buf, pkt_dev->in6_daddr.s6_addr);
- fmt_ip6(buf, pkt_dev->in6_daddr.s6_addr);
+ snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->in6_daddr);
ipv6_addr_copy(&pkt_dev->cur_in6_daddr, &pkt_dev->in6_daddr);
@@ -1332,7 +1323,7 @@
buf[len] = 0;
scan_ip6(buf, pkt_dev->min_in6_daddr.s6_addr);
- fmt_ip6(buf, pkt_dev->min_in6_daddr.s6_addr);
+ snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->min_in6_daddr);
ipv6_addr_copy(&pkt_dev->cur_in6_daddr,
&pkt_dev->min_in6_daddr);
@@ -1355,7 +1346,7 @@
buf[len] = 0;
scan_ip6(buf, pkt_dev->max_in6_daddr.s6_addr);
- fmt_ip6(buf, pkt_dev->max_in6_daddr.s6_addr);
+ snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->max_in6_daddr);
if (debug)
printk(KERN_DEBUG "pktgen: dst6_max set to: %s\n", buf);
@@ -1376,7 +1367,7 @@
buf[len] = 0;
scan_ip6(buf, pkt_dev->in6_saddr.s6_addr);
- fmt_ip6(buf, pkt_dev->in6_saddr.s6_addr);
+ snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->in6_saddr);
ipv6_addr_copy(&pkt_dev->cur_in6_saddr, &pkt_dev->in6_saddr);
@@ -1430,11 +1421,6 @@
return count;
}
if (!strcmp(name, "dst_mac")) {
- char *v = valstr;
- unsigned char old_dmac[ETH_ALEN];
- unsigned char *m = pkt_dev->dst_mac;
- memcpy(old_dmac, pkt_dev->dst_mac, ETH_ALEN);
-
len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
if (len < 0)
return len;
@@ -1442,35 +1428,16 @@
memset(valstr, 0, sizeof(valstr));
if (copy_from_user(valstr, &user_buffer[i], len))
return -EFAULT;
- i += len;
- for (*m = 0; *v && m < pkt_dev->dst_mac + 6; v++) {
- int value;
-
- value = hex_to_bin(*v);
- if (value >= 0)
- *m = *m * 16 + value;
-
- if (*v == ':') {
- m++;
- *m = 0;
- }
- }
-
+ if (!mac_pton(valstr, pkt_dev->dst_mac))
+ return -EINVAL;
/* Set up Dest MAC */
- if (compare_ether_addr(old_dmac, pkt_dev->dst_mac))
- memcpy(&(pkt_dev->hh[0]), pkt_dev->dst_mac, ETH_ALEN);
+ memcpy(&pkt_dev->hh[0], pkt_dev->dst_mac, ETH_ALEN);
- sprintf(pg_result, "OK: dstmac");
+ sprintf(pg_result, "OK: dstmac %pM", pkt_dev->dst_mac);
return count;
}
if (!strcmp(name, "src_mac")) {
- char *v = valstr;
- unsigned char old_smac[ETH_ALEN];
- unsigned char *m = pkt_dev->src_mac;
-
- memcpy(old_smac, pkt_dev->src_mac, ETH_ALEN);
-
len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
if (len < 0)
return len;
@@ -1478,26 +1445,13 @@
memset(valstr, 0, sizeof(valstr));
if (copy_from_user(valstr, &user_buffer[i], len))
return -EFAULT;
- i += len;
- for (*m = 0; *v && m < pkt_dev->src_mac + 6; v++) {
- int value;
-
- value = hex_to_bin(*v);
- if (value >= 0)
- *m = *m * 16 + value;
-
- if (*v == ':') {
- m++;
- *m = 0;
- }
- }
-
+ if (!mac_pton(valstr, pkt_dev->src_mac))
+ return -EINVAL;
/* Set up Src MAC */
- if (compare_ether_addr(old_smac, pkt_dev->src_mac))
- memcpy(&(pkt_dev->hh[6]), pkt_dev->src_mac, ETH_ALEN);
+ memcpy(&pkt_dev->hh[6], pkt_dev->src_mac, ETH_ALEN);
- sprintf(pg_result, "OK: srcmac");
+ sprintf(pg_result, "OK: srcmac %pM", pkt_dev->src_mac);
return count;
}
@@ -2514,7 +2468,6 @@
{
struct xfrm_state *x = pkt_dev->flows[pkt_dev->curfl].x;
int err = 0;
- struct iphdr *iph;
if (!x)
return 0;
@@ -2524,7 +2477,6 @@
return 0;
spin_lock(&x->lock);
- iph = ip_hdr(skb);
err = x->outer_mode->output(x, skb);
if (err)
@@ -2624,6 +2576,7 @@
} else {
int frags = pkt_dev->nfrags;
int i, len;
+ int frag_len;
if (frags > MAX_SKB_FRAGS)
@@ -2635,6 +2588,8 @@
}
i = 0;
+ frag_len = (datalen/frags) < PAGE_SIZE ?
+ (datalen/frags) : PAGE_SIZE;
while (datalen > 0) {
if (unlikely(!pkt_dev->page)) {
int node = numa_node_id();
@@ -2648,38 +2603,18 @@
skb_shinfo(skb)->frags[i].page = pkt_dev->page;
get_page(pkt_dev->page);
skb_shinfo(skb)->frags[i].page_offset = 0;
- skb_shinfo(skb)->frags[i].size =
- (datalen < PAGE_SIZE ? datalen : PAGE_SIZE);
+ /*last fragment, fill rest of data*/
+ if (i == (frags - 1))
+ skb_shinfo(skb)->frags[i].size =
+ (datalen < PAGE_SIZE ? datalen : PAGE_SIZE);
+ else
+ skb_shinfo(skb)->frags[i].size = frag_len;
datalen -= skb_shinfo(skb)->frags[i].size;
skb->len += skb_shinfo(skb)->frags[i].size;
skb->data_len += skb_shinfo(skb)->frags[i].size;
i++;
skb_shinfo(skb)->nr_frags = i;
}
-
- while (i < frags) {
- int rem;
-
- if (i == 0)
- break;
-
- rem = skb_shinfo(skb)->frags[i - 1].size / 2;
- if (rem == 0)
- break;
-
- skb_shinfo(skb)->frags[i - 1].size -= rem;
-
- skb_shinfo(skb)->frags[i] =
- skb_shinfo(skb)->frags[i - 1];
- get_page(skb_shinfo(skb)->frags[i].page);
- skb_shinfo(skb)->frags[i].page =
- skb_shinfo(skb)->frags[i - 1].page;
- skb_shinfo(skb)->frags[i].page_offset +=
- skb_shinfo(skb)->frags[i - 1].size;
- skb_shinfo(skb)->frags[i].size = rem;
- i++;
- skb_shinfo(skb)->nr_frags = i;
- }
}
/* Stamp the time, and sequence number,
@@ -2917,79 +2852,6 @@
return len;
}
-static char tohex(char hexdigit)
-{
- return hexdigit > 9 ? hexdigit + 'a' - 10 : hexdigit + '0';
-}
-
-static int fmt_xlong(char *s, unsigned int i)
-{
- char *bak = s;
- *s = tohex((i >> 12) & 0xf);
- if (s != bak || *s != '0')
- ++s;
- *s = tohex((i >> 8) & 0xf);
- if (s != bak || *s != '0')
- ++s;
- *s = tohex((i >> 4) & 0xf);
- if (s != bak || *s != '0')
- ++s;
- *s = tohex(i & 0xf);
- return s - bak + 1;
-}
-
-static unsigned int fmt_ip6(char *s, const char ip[16])
-{
- unsigned int len;
- unsigned int i;
- unsigned int temp;
- unsigned int compressing;
- int j;
-
- len = 0;
- compressing = 0;
- for (j = 0; j < 16; j += 2) {
-
-#ifdef V4MAPPEDPREFIX
- if (j == 12 && !memcmp(ip, V4mappedprefix, 12)) {
- inet_ntoa_r(*(struct in_addr *)(ip + 12), s);
- temp = strlen(s);
- return len + temp;
- }
-#endif
- temp = ((unsigned long)(unsigned char)ip[j] << 8) +
- (unsigned long)(unsigned char)ip[j + 1];
- if (temp == 0) {
- if (!compressing) {
- compressing = 1;
- if (j == 0) {
- *s++ = ':';
- ++len;
- }
- }
- } else {
- if (compressing) {
- compressing = 0;
- *s++ = ':';
- ++len;
- }
- i = fmt_xlong(s, temp);
- len += i;
- s += i;
- if (j < 14) {
- *s++ = ':';
- ++len;
- }
- }
- }
- if (compressing) {
- *s++ = ':';
- ++len;
- }
- *s = 0;
- return len;
-}
-
static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
struct pktgen_dev *pkt_dev)
{
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index d7c4bb4..d2ba259 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1007,10 +1007,11 @@
s_h = cb->args[0];
s_idx = cb->args[1];
+ rcu_read_lock();
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
- hlist_for_each_entry(dev, node, head, index_hlist) {
+ hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
if (idx < s_idx)
goto cont;
if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
@@ -1023,6 +1024,7 @@
}
}
out:
+ rcu_read_unlock();
cb->args[1] = idx;
cb->args[0] = h;
@@ -1499,6 +1501,7 @@
char ifname[IFNAMSIZ];
struct nlattr *tb[IFLA_MAX+1];
int err;
+ LIST_HEAD(list_kill);
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
if (err < 0)
@@ -1522,7 +1525,9 @@
if (!ops)
return -EOPNOTSUPP;
- ops->dellink(dev, NULL);
+ ops->dellink(dev, &list_kill);
+ unregister_netdevice_many(&list_kill);
+ list_del(&list_kill);
return 0;
}
@@ -1570,12 +1575,6 @@
dev->rtnl_link_state = RTNL_LINK_INITIALIZING;
dev->real_num_tx_queues = real_num_queues;
- if (strchr(dev->name, '%')) {
- err = dev_alloc_name(dev, dev->name);
- if (err < 0)
- goto err_free;
- }
-
if (tb[IFLA_MTU])
dev->mtu = nla_get_u32(tb[IFLA_MTU]);
if (tb[IFLA_ADDRESS])
@@ -1595,8 +1594,6 @@
return dev;
-err_free:
- free_netdev(dev);
err:
return ERR_PTR(err);
}
@@ -1879,7 +1876,6 @@
int min_len;
int family;
int type;
- int err;
type = nlh->nlmsg_type;
if (type > RTM_MAX)
@@ -1906,11 +1902,8 @@
if (dumpit == NULL)
return -EOPNOTSUPP;
- __rtnl_unlock();
rtnl = net->rtnl;
- err = netlink_dump_start(rtnl, skb, nlh, dumpit, NULL);
- rtnl_lock();
- return err;
+ return netlink_dump_start(rtnl, skb, nlh, dumpit, NULL);
}
memset(rta_buf, 0, (rtattr_max * sizeof(struct rtattr *)));
@@ -1980,7 +1973,7 @@
{
struct sock *sk;
sk = netlink_kernel_create(net, NETLINK_ROUTE, RTNLGRP_MAX,
- rtnetlink_rcv, &rtnl_mutex, THIS_MODULE);
+ rtnetlink_rcv, NULL, THIS_MODULE);
if (!sk)
return -ENOMEM;
net->rtnl = sk;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 7ebeed0..46cbd28 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -57,6 +57,7 @@
#include <linux/init.h>
#include <linux/scatterlist.h>
#include <linux/errqueue.h>
+#include <linux/prefetch.h>
#include <net/protocol.h>
#include <net/dst.h>
@@ -2993,6 +2994,9 @@
skb->destructor = sock_rmem_free;
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
+ /* before exiting rcu section, make sure dst is refcounted */
+ skb_dst_force(skb);
+
skb_queue_tail(&sk->sk_error_queue, skb);
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_data_ready(sk, skb->len);
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 385b609..a829e3f 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -122,6 +122,15 @@
.mode = 0644,
.proc_handler = proc_dointvec
},
+#ifdef CONFIG_BPF_JIT
+ {
+ .procname = "bpf_jit_enable",
+ .data = &bpf_jit_enable,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
+#endif
{
.procname = "netdev_tstamp_prequeue",
.data = &netdev_tstamp_prequeue,
diff --git a/net/core/utils.c b/net/core/utils.c
index 5fea0ab..2012bc7 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -296,3 +296,27 @@
csum_unfold(*sum)));
}
EXPORT_SYMBOL(inet_proto_csum_replace4);
+
+int mac_pton(const char *s, u8 *mac)
+{
+ int i;
+
+ /* XX:XX:XX:XX:XX:XX */
+ if (strlen(s) < 3 * ETH_ALEN - 1)
+ return 0;
+
+ /* Don't dirty result unless string is valid MAC. */
+ for (i = 0; i < ETH_ALEN; i++) {
+ if (!strchr("0123456789abcdefABCDEF", s[i * 3]))
+ return 0;
+ if (!strchr("0123456789abcdefABCDEF", s[i * 3 + 1]))
+ return 0;
+ if (i != ETH_ALEN - 1 && s[i * 3 + 2] != ':')
+ return 0;
+ }
+ for (i = 0; i < ETH_ALEN; i++) {
+ mac[i] = (hex_to_bin(s[i * 3]) << 4) | hex_to_bin(s[i * 3 + 1]);
+ }
+ return 1;
+}
+EXPORT_SYMBOL(mac_pton);
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index ae451c6..8c36adf 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -40,13 +40,15 @@
int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
+ const struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
struct inet_sock *inet = inet_sk(sk);
struct dccp_sock *dp = dccp_sk(sk);
- const struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
__be16 orig_sport, orig_dport;
- struct rtable *rt;
__be32 daddr, nexthop;
+ struct flowi4 *fl4;
+ struct rtable *rt;
int err;
+ struct ip_options_rcu *inet_opt;
dp->dccps_role = DCCP_ROLE_CLIENT;
@@ -57,15 +59,19 @@
return -EAFNOSUPPORT;
nexthop = daddr = usin->sin_addr.s_addr;
- if (inet->opt != NULL && inet->opt->srr) {
+
+ inet_opt = rcu_dereference_protected(inet->inet_opt,
+ sock_owned_by_user(sk));
+ if (inet_opt != NULL && inet_opt->opt.srr) {
if (daddr == 0)
return -EINVAL;
- nexthop = inet->opt->faddr;
+ nexthop = inet_opt->opt.faddr;
}
orig_sport = inet->inet_sport;
orig_dport = usin->sin_port;
- rt = ip_route_connect(nexthop, inet->inet_saddr,
+ fl4 = &inet->cork.fl.u.ip4;
+ rt = ip_route_connect(fl4, nexthop, inet->inet_saddr,
RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
IPPROTO_DCCP,
orig_sport, orig_dport, sk, true);
@@ -77,19 +83,19 @@
return -ENETUNREACH;
}
- if (inet->opt == NULL || !inet->opt->srr)
- daddr = rt->rt_dst;
+ if (inet_opt == NULL || !inet_opt->opt.srr)
+ daddr = fl4->daddr;
if (inet->inet_saddr == 0)
- inet->inet_saddr = rt->rt_src;
+ inet->inet_saddr = fl4->saddr;
inet->inet_rcv_saddr = inet->inet_saddr;
inet->inet_dport = usin->sin_port;
inet->inet_daddr = daddr;
inet_csk(sk)->icsk_ext_hdr_len = 0;
- if (inet->opt != NULL)
- inet_csk(sk)->icsk_ext_hdr_len = inet->opt->optlen;
+ if (inet_opt)
+ inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
/*
* Socket identity is still unknown (sport may be zero).
* However we set state to DCCP_REQUESTING and not releasing socket
@@ -101,8 +107,7 @@
if (err != 0)
goto failure;
- rt = ip_route_newports(rt, IPPROTO_DCCP,
- orig_sport, orig_dport,
+ rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
inet->inet_sport, inet->inet_dport, sk);
if (IS_ERR(rt)) {
rt = NULL;
@@ -391,32 +396,30 @@
if (sk_acceptq_is_full(sk))
goto exit_overflow;
- if (dst == NULL && (dst = inet_csk_route_req(sk, req)) == NULL)
- goto exit;
-
newsk = dccp_create_openreq_child(sk, req, skb);
if (newsk == NULL)
goto exit_nonewsk;
- sk_setup_caps(newsk, dst);
-
newinet = inet_sk(newsk);
ireq = inet_rsk(req);
newinet->inet_daddr = ireq->rmt_addr;
newinet->inet_rcv_saddr = ireq->loc_addr;
newinet->inet_saddr = ireq->loc_addr;
- newinet->opt = ireq->opt;
+ newinet->inet_opt = ireq->opt;
ireq->opt = NULL;
newinet->mc_index = inet_iif(skb);
newinet->mc_ttl = ip_hdr(skb)->ttl;
newinet->inet_id = jiffies;
+ if (dst == NULL && (dst = inet_csk_route_child_sock(sk, newsk, req)) == NULL)
+ goto put_and_exit;
+
+ sk_setup_caps(newsk, dst);
+
dccp_sync_mss(newsk, dst_mtu(dst));
- if (__inet_inherit_port(sk, newsk) < 0) {
- sock_put(newsk);
- goto exit;
- }
+ if (__inet_inherit_port(sk, newsk) < 0)
+ goto put_and_exit;
__inet_hash_nolisten(newsk, NULL);
return newsk;
@@ -428,6 +431,9 @@
exit:
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
+put_and_exit:
+ sock_put(newsk);
+ goto exit;
}
EXPORT_SYMBOL_GPL(dccp_v4_request_recv_sock);
@@ -491,8 +497,9 @@
int err = -1;
struct sk_buff *skb;
struct dst_entry *dst;
+ struct flowi4 fl4;
- dst = inet_csk_route_req(sk, req);
+ dst = inet_csk_route_req(sk, &fl4, req);
if (dst == NULL)
goto out;
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index de1b7e3..8dc4348 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -54,8 +54,8 @@
/* add pseudo-header to DCCP checksum stored in skb->csum */
static inline __sum16 dccp_v6_csum_finish(struct sk_buff *skb,
- struct in6_addr *saddr,
- struct in6_addr *daddr)
+ const struct in6_addr *saddr,
+ const struct in6_addr *daddr)
{
return csum_ipv6_magic(saddr, daddr, skb->len, IPPROTO_DCCP, skb->csum);
}
@@ -87,7 +87,7 @@
static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
u8 type, u8 code, int offset, __be32 info)
{
- struct ipv6hdr *hdr = (struct ipv6hdr *)skb->data;
+ const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
struct dccp_sock *dp;
struct ipv6_pinfo *np;
@@ -296,7 +296,7 @@
static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
{
- struct ipv6hdr *rxip6h;
+ const struct ipv6hdr *rxip6h;
struct sk_buff *skb;
struct flowi6 fl6;
struct net *net = dev_net(skb_dst(rxskb)->dev);
@@ -573,7 +573,7 @@
First: no IPv4 options.
*/
- newinet->opt = NULL;
+ newinet->inet_opt = NULL;
/* Clone RX bits */
newnp->rxopt.all = np->rxopt.all;
diff --git a/net/dccp/options.c b/net/dccp/options.c
index f06ffcf..4b2ab65 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -123,6 +123,8 @@
case DCCPO_CHANGE_L ... DCCPO_CONFIRM_R:
if (pkt_type == DCCP_PKT_DATA) /* RFC 4340, 6 */
break;
+ if (len == 0)
+ goto out_invalid_option;
rc = dccp_feat_parse_options(sk, dreq, mandatory, opt,
*value, value + 1, len - 1);
if (rc)
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 136d41c..fab108e 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -43,7 +43,7 @@
static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
{
if (likely(skb != NULL)) {
- const struct inet_sock *inet = inet_sk(sk);
+ struct inet_sock *inet = inet_sk(sk);
const struct inet_connection_sock *icsk = inet_csk(sk);
struct dccp_sock *dp = dccp_sk(sk);
struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
@@ -136,7 +136,7 @@
DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
- err = icsk->icsk_af_ops->queue_xmit(skb);
+ err = icsk->icsk_af_ops->queue_xmit(skb, &inet->cork.fl);
return net_xmit_eval(err);
}
return -ENOBUFS;
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 0dcaa90..cf26ac7 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -332,14 +332,9 @@
return ifa;
}
-static void dn_dev_free_ifa_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct dn_ifaddr, rcu));
-}
-
static void dn_dev_free_ifa(struct dn_ifaddr *ifa)
{
- call_rcu(&ifa->rcu, dn_dev_free_ifa_rcu);
+ kfree_rcu(ifa, rcu);
}
static void dn_dev_del_ifa(struct dn_dev *dn_db, struct dn_ifaddr __rcu **ifap, int destroy)
@@ -752,7 +747,8 @@
skip_naddr = cb->args[1];
idx = 0;
- for_each_netdev(&init_net, dev) {
+ rcu_read_lock();
+ for_each_netdev_rcu(&init_net, dev) {
if (idx < skip_ndevs)
goto cont;
else if (idx > skip_ndevs) {
@@ -761,11 +757,11 @@
skip_naddr = 0;
}
- if ((dn_db = rtnl_dereference(dev->dn_ptr)) == NULL)
+ if ((dn_db = rcu_dereference(dev->dn_ptr)) == NULL)
goto cont;
- for (ifa = rtnl_dereference(dn_db->ifa_list), dn_idx = 0; ifa;
- ifa = rtnl_dereference(ifa->ifa_next), dn_idx++) {
+ for (ifa = rcu_dereference(dn_db->ifa_list), dn_idx = 0; ifa;
+ ifa = rcu_dereference(ifa->ifa_next), dn_idx++) {
if (dn_idx < skip_naddr)
continue;
@@ -778,6 +774,7 @@
idx++;
}
done:
+ rcu_read_unlock();
cb->args[0] = idx;
cb->args[1] = dn_idx;
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 9f09d4f..74544bc 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -1125,13 +1125,11 @@
if (dev_out->flags & IFF_LOOPBACK)
flags |= RTCF_LOCAL;
- rt = dst_alloc(&dn_dst_ops, 0);
+ rt = dst_alloc(&dn_dst_ops, dev_out, 1, 0, DST_HOST);
if (rt == NULL)
goto e_nobufs;
- atomic_set(&rt->dst.__refcnt, 1);
- rt->dst.flags = DST_HOST;
-
+ memset(&rt->fld, 0, sizeof(rt->fld));
rt->fld.saddr = oldflp->saddr;
rt->fld.daddr = oldflp->daddr;
rt->fld.flowidn_oif = oldflp->flowidn_oif;
@@ -1146,8 +1144,6 @@
rt->rt_dst_map = fld.daddr;
rt->rt_src_map = fld.saddr;
- rt->dst.dev = dev_out;
- dev_hold(dev_out);
rt->dst.neighbour = neigh;
neigh = NULL;
@@ -1399,10 +1395,11 @@
}
make_route:
- rt = dst_alloc(&dn_dst_ops, 0);
+ rt = dst_alloc(&dn_dst_ops, out_dev, 0, 0, DST_HOST);
if (rt == NULL)
goto e_nobufs;
+ memset(&rt->fld, 0, sizeof(rt->fld));
rt->rt_saddr = fld.saddr;
rt->rt_daddr = fld.daddr;
rt->rt_gateway = fld.daddr;
@@ -1419,9 +1416,7 @@
rt->fld.flowidn_iif = in_dev->ifindex;
rt->fld.flowidn_mark = fld.flowidn_mark;
- rt->dst.flags = DST_HOST;
rt->dst.neighbour = neigh;
- rt->dst.dev = out_dev;
rt->dst.lastuse = jiffies;
rt->dst.output = dn_rt_bug;
switch(res.type) {
@@ -1440,8 +1435,6 @@
rt->dst.input = dst_discard;
}
rt->rt_flags = flags;
- if (rt->dst.dev)
- dev_hold(rt->dst.dev);
err = dn_rt_set_next_hop(rt, &res);
if (err)
diff --git a/net/decnet/dn_table.c b/net/decnet/dn_table.c
index 99d8d3a..bd0a52d 100644
--- a/net/decnet/dn_table.c
+++ b/net/decnet/dn_table.c
@@ -123,11 +123,11 @@
struct dn_fib_node **old_ht,
int old_divisor)
{
- int i;
struct dn_fib_node *f, **fp, *next;
+ int i;
for(i = 0; i < old_divisor; i++) {
- for(f = old_ht[i]; f; f = f->fn_next) {
+ for(f = old_ht[i]; f; f = next) {
next = f->fn_next;
for(fp = dn_chain_p(f->fn_key, dz);
*fp && dn_key_leq((*fp)->fn_key, f->fn_key);
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 87bb5f4..c53ded2 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -41,12 +41,12 @@
default n
config NET_DSA_MV88E6131
- bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
+ bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
select NET_DSA_MV88E6XXX
select NET_DSA_MV88E6XXX_NEED_PPU
select NET_DSA_TAG_DSA
---help---
- This enables support for the Marvell 88E6095/6095F/6131
+ This enables support for the Marvell 88E6085/6095/6095F/6131
ethernet switch chips.
config NET_DSA_MV88E6123_61_65
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
index 3da4188..45f7411 100644
--- a/net/dsa/mv88e6131.c
+++ b/net/dsa/mv88e6131.c
@@ -207,8 +207,15 @@
* mode, but do not enable forwarding of unknown unicasts.
*/
val = 0x0433;
- if (p == dsa_upstream_port(ds))
+ if (p == dsa_upstream_port(ds)) {
val |= 0x0104;
+ /*
+ * On 6085, unknown multicast forward is controlled
+ * here rather than in Port Control 2 register.
+ */
+ if (ps->id == ID_6085)
+ val |= 0x0008;
+ }
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
REG_WRITE(addr, 0x04, val);
@@ -251,10 +258,19 @@
* If this is the upstream port for this switch, enable
* forwarding of unknown multicast addresses.
*/
- val = 0x0080 | dsa_upstream_port(ds);
- if (p == dsa_upstream_port(ds))
- val |= 0x0040;
- REG_WRITE(addr, 0x08, val);
+ if (ps->id == ID_6085)
+ /*
+ * on 6085, bits 3:0 are reserved, bit 6 control ARP
+ * mirroring, and multicast forward is handled in
+ * Port Control register.
+ */
+ REG_WRITE(addr, 0x08, 0x0080);
+ else {
+ val = 0x0080 | dsa_upstream_port(ds);
+ if (p == dsa_upstream_port(ds))
+ val |= 0x0040;
+ REG_WRITE(addr, 0x08, val);
+ }
/*
* Rate Control: disable ingress rate limiting.
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 64ca2a6..0a47b6c 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -288,7 +288,6 @@
.get_drvinfo = dsa_slave_get_drvinfo,
.nway_reset = dsa_slave_nway_reset,
.get_link = dsa_slave_get_link,
- .set_sg = ethtool_op_set_sg,
.get_strings = dsa_slave_get_strings,
.get_ethtool_stats = dsa_slave_get_ethtool_stats,
.get_sset_count = dsa_slave_get_sset_count,
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 116d3fd..a1d9f37 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -935,7 +935,6 @@
struct sk_buff *skb;
unsigned char *data;
struct aunhdr *ah;
- struct iphdr *ip;
size_t len;
while ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL) {
@@ -949,7 +948,6 @@
data = skb_transport_header(skb) + sizeof(struct udphdr);
ah = (struct aunhdr *)data;
len = skb->len - sizeof(struct udphdr);
- ip = ip_hdr(skb);
switch (ah->code)
{
@@ -962,12 +960,6 @@
case 4:
aun_tx_ack(ah->handle, ECTYPE_TRANSMIT_NOT_LISTENING);
break;
-#if 0
- /* This isn't quite right yet. */
- case 5:
- aun_send_response(ip->saddr, ah->handle, 6, ah->cb);
- break;
-#endif
default:
printk(KERN_DEBUG "unknown AUN packet (type %d)\n", data[0]);
}
diff --git a/net/ipv4/Makefile b/net/ipv4/Makefile
index 0dc772d..f2dc69c 100644
--- a/net/ipv4/Makefile
+++ b/net/ipv4/Makefile
@@ -11,7 +11,7 @@
datagram.o raw.o udp.o udplite.o \
arp.o icmp.o devinet.o af_inet.o igmp.o \
fib_frontend.o fib_semantics.o fib_trie.o \
- inet_fragment.o
+ inet_fragment.o ping.o
obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
obj-$(CONFIG_PROC_FS) += proc.o
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 807d83c..cc14631 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -105,6 +105,7 @@
#include <net/tcp.h>
#include <net/udp.h>
#include <net/udplite.h>
+#include <net/ping.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <net/raw.h>
@@ -153,7 +154,7 @@
WARN_ON(sk->sk_wmem_queued);
WARN_ON(sk->sk_forward_alloc);
- kfree(inet->opt);
+ kfree(rcu_dereference_protected(inet->inet_opt, 1));
dst_release(rcu_dereference_check(sk->sk_dst_cache, 1));
sk_refcnt_debug_dec(sk);
}
@@ -1008,6 +1009,14 @@
.flags = INET_PROTOSW_PERMANENT,
},
+ {
+ .type = SOCK_DGRAM,
+ .protocol = IPPROTO_ICMP,
+ .prot = &ping_prot,
+ .ops = &inet_dgram_ops,
+ .no_check = UDP_CSUM_DEFAULT,
+ .flags = INET_PROTOSW_REUSE,
+ },
{
.type = SOCK_RAW,
@@ -1103,14 +1112,19 @@
struct inet_sock *inet = inet_sk(sk);
__be32 old_saddr = inet->inet_saddr;
__be32 daddr = inet->inet_daddr;
+ struct flowi4 *fl4;
struct rtable *rt;
__be32 new_saddr;
+ struct ip_options_rcu *inet_opt;
- if (inet->opt && inet->opt->srr)
- daddr = inet->opt->faddr;
+ inet_opt = rcu_dereference_protected(inet->inet_opt,
+ sock_owned_by_user(sk));
+ if (inet_opt && inet_opt->opt.srr)
+ daddr = inet_opt->opt.faddr;
/* Query new route. */
- rt = ip_route_connect(daddr, 0, RT_CONN_FLAGS(sk),
+ fl4 = &inet->cork.fl.u.ip4;
+ rt = ip_route_connect(fl4, daddr, 0, RT_CONN_FLAGS(sk),
sk->sk_bound_dev_if, sk->sk_protocol,
inet->inet_sport, inet->inet_dport, sk, false);
if (IS_ERR(rt))
@@ -1118,7 +1132,7 @@
sk_setup_caps(sk, &rt->dst);
- new_saddr = rt->rt_src;
+ new_saddr = fl4->saddr;
if (new_saddr == old_saddr)
return 0;
@@ -1147,6 +1161,8 @@
struct inet_sock *inet = inet_sk(sk);
struct rtable *rt = (struct rtable *)__sk_dst_check(sk, 0);
__be32 daddr;
+ struct ip_options_rcu *inet_opt;
+ struct flowi4 *fl4;
int err;
/* Route is OK, nothing to do. */
@@ -1154,10 +1170,14 @@
return 0;
/* Reroute. */
+ rcu_read_lock();
+ inet_opt = rcu_dereference(inet->inet_opt);
daddr = inet->inet_daddr;
- if (inet->opt && inet->opt->srr)
- daddr = inet->opt->faddr;
- rt = ip_route_output_ports(sock_net(sk), sk, daddr, inet->inet_saddr,
+ if (inet_opt && inet_opt->opt.srr)
+ daddr = inet_opt->opt.faddr;
+ rcu_read_unlock();
+ fl4 = &inet->cork.fl.u.ip4;
+ rt = ip_route_output_ports(sock_net(sk), fl4, sk, daddr, inet->inet_saddr,
inet->inet_dport, inet->inet_sport,
sk->sk_protocol, RT_CONN_FLAGS(sk),
sk->sk_bound_dev_if);
@@ -1186,7 +1206,7 @@
static int inet_gso_send_check(struct sk_buff *skb)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
const struct net_protocol *ops;
int proto;
int ihl;
@@ -1293,7 +1313,7 @@
const struct net_protocol *ops;
struct sk_buff **pp = NULL;
struct sk_buff *p;
- struct iphdr *iph;
+ const struct iphdr *iph;
unsigned int hlen;
unsigned int off;
unsigned int id;
@@ -1516,6 +1536,7 @@
static const struct net_protocol icmp_protocol = {
.handler = icmp_rcv,
+ .err_handler = ping_err,
.no_policy = 1,
.netns_ok = 1,
};
@@ -1631,6 +1652,10 @@
if (rc)
goto out_unregister_udp_proto;
+ rc = proto_register(&ping_prot, 1);
+ if (rc)
+ goto out_unregister_raw_proto;
+
/*
* Tell SOCKET that we are alive...
*/
@@ -1686,6 +1711,8 @@
/* Add UDP-Lite (RFC 3828) */
udplite4_register();
+ ping_init();
+
/*
* Set the ICMP layer up
*/
@@ -1716,6 +1743,8 @@
rc = 0;
out:
return rc;
+out_unregister_raw_proto:
+ proto_unregister(&raw_prot);
out_unregister_udp_proto:
proto_unregister(&udp_prot);
out_unregister_tcp_proto:
@@ -1740,11 +1769,15 @@
goto out_tcp;
if (udp4_proc_init())
goto out_udp;
+ if (ping_proc_init())
+ goto out_ping;
if (ip_misc_proc_init())
goto out_misc;
out:
return rc;
out_misc:
+ ping_proc_exit();
+out_ping:
udp4_proc_exit();
out_udp:
tcp4_proc_exit();
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index 4286fd3..c1f4154 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -73,7 +73,7 @@
* into IP header for icv calculation. Options are already checked
* for validity, so paranoia is not required. */
-static int ip_clear_mutable_options(struct iphdr *iph, __be32 *daddr)
+static int ip_clear_mutable_options(const struct iphdr *iph, __be32 *daddr)
{
unsigned char * optptr = (unsigned char*)(iph+1);
int l = iph->ihl*4 - sizeof(struct iphdr);
@@ -396,7 +396,7 @@
static void ah4_err(struct sk_buff *skb, u32 info)
{
struct net *net = dev_net(skb->dev);
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
struct ip_auth_hdr *ah = (struct ip_auth_hdr *)(skb->data+(iph->ihl<<2));
struct xfrm_state *x;
@@ -404,7 +404,8 @@
icmp_hdr(skb)->code != ICMP_FRAG_NEEDED)
return;
- x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, ah->spi, IPPROTO_AH, AF_INET);
+ x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+ ah->spi, IPPROTO_AH, AF_INET);
if (!x)
return;
printk(KERN_DEBUG "pmtu discovery on SA AH/%08x/%08x\n",
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index a0af7ea..2b3c23c 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1857,6 +1857,11 @@
return CIPSO_V4_HDR_LEN + ret_val;
}
+static void opt_kfree_rcu(struct rcu_head *head)
+{
+ kfree(container_of(head, struct ip_options_rcu, rcu));
+}
+
/**
* cipso_v4_sock_setattr - Add a CIPSO option to a socket
* @sk: the socket
@@ -1879,7 +1884,7 @@
unsigned char *buf = NULL;
u32 buf_len;
u32 opt_len;
- struct ip_options *opt = NULL;
+ struct ip_options_rcu *old, *opt = NULL;
struct inet_sock *sk_inet;
struct inet_connection_sock *sk_conn;
@@ -1915,22 +1920,25 @@
ret_val = -ENOMEM;
goto socket_setattr_failure;
}
- memcpy(opt->__data, buf, buf_len);
- opt->optlen = opt_len;
- opt->cipso = sizeof(struct iphdr);
+ memcpy(opt->opt.__data, buf, buf_len);
+ opt->opt.optlen = opt_len;
+ opt->opt.cipso = sizeof(struct iphdr);
kfree(buf);
buf = NULL;
sk_inet = inet_sk(sk);
+
+ old = rcu_dereference_protected(sk_inet->inet_opt, sock_owned_by_user(sk));
if (sk_inet->is_icsk) {
sk_conn = inet_csk(sk);
- if (sk_inet->opt)
- sk_conn->icsk_ext_hdr_len -= sk_inet->opt->optlen;
- sk_conn->icsk_ext_hdr_len += opt->optlen;
+ if (old)
+ sk_conn->icsk_ext_hdr_len -= old->opt.optlen;
+ sk_conn->icsk_ext_hdr_len += opt->opt.optlen;
sk_conn->icsk_sync_mss(sk, sk_conn->icsk_pmtu_cookie);
}
- opt = xchg(&sk_inet->opt, opt);
- kfree(opt);
+ rcu_assign_pointer(sk_inet->inet_opt, opt);
+ if (old)
+ call_rcu(&old->rcu, opt_kfree_rcu);
return 0;
@@ -1960,7 +1968,7 @@
unsigned char *buf = NULL;
u32 buf_len;
u32 opt_len;
- struct ip_options *opt = NULL;
+ struct ip_options_rcu *opt = NULL;
struct inet_request_sock *req_inet;
/* We allocate the maximum CIPSO option size here so we are probably
@@ -1988,15 +1996,16 @@
ret_val = -ENOMEM;
goto req_setattr_failure;
}
- memcpy(opt->__data, buf, buf_len);
- opt->optlen = opt_len;
- opt->cipso = sizeof(struct iphdr);
+ memcpy(opt->opt.__data, buf, buf_len);
+ opt->opt.optlen = opt_len;
+ opt->opt.cipso = sizeof(struct iphdr);
kfree(buf);
buf = NULL;
req_inet = inet_rsk(req);
opt = xchg(&req_inet->opt, opt);
- kfree(opt);
+ if (opt)
+ call_rcu(&opt->rcu, opt_kfree_rcu);
return 0;
@@ -2016,34 +2025,34 @@
* values on failure.
*
*/
-static int cipso_v4_delopt(struct ip_options **opt_ptr)
+static int cipso_v4_delopt(struct ip_options_rcu **opt_ptr)
{
int hdr_delta = 0;
- struct ip_options *opt = *opt_ptr;
+ struct ip_options_rcu *opt = *opt_ptr;
- if (opt->srr || opt->rr || opt->ts || opt->router_alert) {
+ if (opt->opt.srr || opt->opt.rr || opt->opt.ts || opt->opt.router_alert) {
u8 cipso_len;
u8 cipso_off;
unsigned char *cipso_ptr;
int iter;
int optlen_new;
- cipso_off = opt->cipso - sizeof(struct iphdr);
- cipso_ptr = &opt->__data[cipso_off];
+ cipso_off = opt->opt.cipso - sizeof(struct iphdr);
+ cipso_ptr = &opt->opt.__data[cipso_off];
cipso_len = cipso_ptr[1];
- if (opt->srr > opt->cipso)
- opt->srr -= cipso_len;
- if (opt->rr > opt->cipso)
- opt->rr -= cipso_len;
- if (opt->ts > opt->cipso)
- opt->ts -= cipso_len;
- if (opt->router_alert > opt->cipso)
- opt->router_alert -= cipso_len;
- opt->cipso = 0;
+ if (opt->opt.srr > opt->opt.cipso)
+ opt->opt.srr -= cipso_len;
+ if (opt->opt.rr > opt->opt.cipso)
+ opt->opt.rr -= cipso_len;
+ if (opt->opt.ts > opt->opt.cipso)
+ opt->opt.ts -= cipso_len;
+ if (opt->opt.router_alert > opt->opt.cipso)
+ opt->opt.router_alert -= cipso_len;
+ opt->opt.cipso = 0;
memmove(cipso_ptr, cipso_ptr + cipso_len,
- opt->optlen - cipso_off - cipso_len);
+ opt->opt.optlen - cipso_off - cipso_len);
/* determining the new total option length is tricky because of
* the padding necessary, the only thing i can think to do at
@@ -2052,21 +2061,21 @@
* from there we can determine the new total option length */
iter = 0;
optlen_new = 0;
- while (iter < opt->optlen)
- if (opt->__data[iter] != IPOPT_NOP) {
- iter += opt->__data[iter + 1];
+ while (iter < opt->opt.optlen)
+ if (opt->opt.__data[iter] != IPOPT_NOP) {
+ iter += opt->opt.__data[iter + 1];
optlen_new = iter;
} else
iter++;
- hdr_delta = opt->optlen;
- opt->optlen = (optlen_new + 3) & ~3;
- hdr_delta -= opt->optlen;
+ hdr_delta = opt->opt.optlen;
+ opt->opt.optlen = (optlen_new + 3) & ~3;
+ hdr_delta -= opt->opt.optlen;
} else {
/* only the cipso option was present on the socket so we can
* remove the entire option struct */
*opt_ptr = NULL;
- hdr_delta = opt->optlen;
- kfree(opt);
+ hdr_delta = opt->opt.optlen;
+ call_rcu(&opt->rcu, opt_kfree_rcu);
}
return hdr_delta;
@@ -2083,15 +2092,15 @@
void cipso_v4_sock_delattr(struct sock *sk)
{
int hdr_delta;
- struct ip_options *opt;
+ struct ip_options_rcu *opt;
struct inet_sock *sk_inet;
sk_inet = inet_sk(sk);
- opt = sk_inet->opt;
- if (opt == NULL || opt->cipso == 0)
+ opt = rcu_dereference_protected(sk_inet->inet_opt, 1);
+ if (opt == NULL || opt->opt.cipso == 0)
return;
- hdr_delta = cipso_v4_delopt(&sk_inet->opt);
+ hdr_delta = cipso_v4_delopt(&sk_inet->inet_opt);
if (sk_inet->is_icsk && hdr_delta > 0) {
struct inet_connection_sock *sk_conn = inet_csk(sk);
sk_conn->icsk_ext_hdr_len -= hdr_delta;
@@ -2109,12 +2118,12 @@
*/
void cipso_v4_req_delattr(struct request_sock *req)
{
- struct ip_options *opt;
+ struct ip_options_rcu *opt;
struct inet_request_sock *req_inet;
req_inet = inet_rsk(req);
opt = req_inet->opt;
- if (opt == NULL || opt->cipso == 0)
+ if (opt == NULL || opt->opt.cipso == 0)
return;
cipso_v4_delopt(&req_inet->opt);
@@ -2184,14 +2193,18 @@
*/
int cipso_v4_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr)
{
- struct ip_options *opt;
+ struct ip_options_rcu *opt;
+ int res = -ENOMSG;
- opt = inet_sk(sk)->opt;
- if (opt == NULL || opt->cipso == 0)
- return -ENOMSG;
-
- return cipso_v4_getattr(opt->__data + opt->cipso - sizeof(struct iphdr),
- secattr);
+ rcu_read_lock();
+ opt = rcu_dereference(inet_sk(sk)->inet_opt);
+ if (opt && opt->opt.cipso)
+ res = cipso_v4_getattr(opt->opt.__data +
+ opt->opt.cipso -
+ sizeof(struct iphdr),
+ secattr);
+ rcu_read_unlock();
+ return res;
}
/**
diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c
index 85bd24c..424fafb 100644
--- a/net/ipv4/datagram.c
+++ b/net/ipv4/datagram.c
@@ -24,6 +24,7 @@
{
struct inet_sock *inet = inet_sk(sk);
struct sockaddr_in *usin = (struct sockaddr_in *) uaddr;
+ struct flowi4 *fl4;
struct rtable *rt;
__be32 saddr;
int oif;
@@ -38,6 +39,8 @@
sk_dst_reset(sk);
+ lock_sock(sk);
+
oif = sk->sk_bound_dev_if;
saddr = inet->inet_saddr;
if (ipv4_is_multicast(usin->sin_addr.s_addr)) {
@@ -46,7 +49,8 @@
if (!saddr)
saddr = inet->mc_addr;
}
- rt = ip_route_connect(usin->sin_addr.s_addr, saddr,
+ fl4 = &inet->cork.fl.u.ip4;
+ rt = ip_route_connect(fl4, usin->sin_addr.s_addr, saddr,
RT_CONN_FLAGS(sk), oif,
sk->sk_protocol,
inet->inet_sport, usin->sin_port, sk, true);
@@ -54,26 +58,30 @@
err = PTR_ERR(rt);
if (err == -ENETUNREACH)
IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
- return err;
+ goto out;
}
if ((rt->rt_flags & RTCF_BROADCAST) && !sock_flag(sk, SOCK_BROADCAST)) {
ip_rt_put(rt);
- return -EACCES;
+ err = -EACCES;
+ goto out;
}
if (!inet->inet_saddr)
- inet->inet_saddr = rt->rt_src; /* Update source address */
+ inet->inet_saddr = fl4->saddr; /* Update source address */
if (!inet->inet_rcv_saddr) {
- inet->inet_rcv_saddr = rt->rt_src;
+ inet->inet_rcv_saddr = fl4->saddr;
if (sk->sk_prot->rehash)
sk->sk_prot->rehash(sk);
}
- inet->inet_daddr = rt->rt_dst;
+ inet->inet_daddr = fl4->daddr;
inet->inet_dport = usin->sin_port;
sk->sk_state = TCP_ESTABLISHED;
inet->inet_id = jiffies;
sk_dst_set(sk, &rt->dst);
- return 0;
+ err = 0;
+out:
+ release_sock(sk);
+ return err;
}
EXPORT_SYMBOL(ip4_datagram_connect);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 5345b0b..0d4a184 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1369,7 +1369,7 @@
static size_t inet_get_link_af_size(const struct net_device *dev)
{
- struct in_device *in_dev = __in_dev_get_rtnl(dev);
+ struct in_device *in_dev = rcu_dereference_rtnl(dev->ip_ptr);
if (!in_dev)
return 0;
@@ -1379,7 +1379,7 @@
static int inet_fill_link_af(struct sk_buff *skb, const struct net_device *dev)
{
- struct in_device *in_dev = __in_dev_get_rtnl(dev);
+ struct in_device *in_dev = rcu_dereference_rtnl(dev->ip_ptr);
struct nlattr *nla;
int i;
@@ -1680,7 +1680,7 @@
return;
cnf->sysctl = NULL;
- unregister_sysctl_table(t->sysctl_header);
+ unregister_net_sysctl_table(t->sysctl_header);
kfree(t->dev_name);
kfree(t);
}
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 03f994b..a5b4134 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -276,7 +276,7 @@
static int esp_input_done2(struct sk_buff *skb, int err)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
struct xfrm_state *x = xfrm_input_state(skb);
struct esp_data *esp = x->data;
struct crypto_aead *aead = esp->aead;
@@ -484,7 +484,7 @@
static void esp4_err(struct sk_buff *skb, u32 info)
{
struct net *net = dev_net(skb->dev);
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
struct ip_esp_hdr *esph = (struct ip_esp_hdr *)(skb->data+(iph->ihl<<2));
struct xfrm_state *x;
@@ -492,7 +492,8 @@
icmp_hdr(skb)->code != ICMP_FRAG_NEEDED)
return;
- x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, esph->spi, IPPROTO_ESP, AF_INET);
+ x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+ esph->spi, IPPROTO_ESP, AF_INET);
if (!x)
return;
NETDEBUG(KERN_DEBUG "pmtu discovery on SA ESP/%08x/%08x\n",
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 4510883..2252471 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -44,6 +44,7 @@
#include <net/arp.h>
#include <net/ip_fib.h>
#include <net/rtnetlink.h>
+#include <net/xfrm.h>
#ifndef CONFIG_IP_MULTIPLE_TABLES
@@ -188,9 +189,9 @@
* - check, that packet arrived from expected physical interface.
* called with rcu_read_lock()
*/
-int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
- struct net_device *dev, __be32 *spec_dst,
- u32 *itag, u32 mark)
+int fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst, u8 tos,
+ int oif, struct net_device *dev, __be32 *spec_dst,
+ u32 *itag)
{
struct in_device *in_dev;
struct flowi4 fl4;
@@ -202,7 +203,6 @@
fl4.flowi4_oif = 0;
fl4.flowi4_iif = oif;
- fl4.flowi4_mark = mark;
fl4.daddr = src;
fl4.saddr = dst;
fl4.flowi4_tos = tos;
@@ -212,10 +212,12 @@
in_dev = __in_dev_get_rcu(dev);
if (in_dev) {
no_addr = in_dev->ifa_list == NULL;
- rpf = IN_DEV_RPFILTER(in_dev);
+
+ /* Ignore rp_filter for packets protected by IPsec. */
+ rpf = secpath_exists(skb) ? 0 : IN_DEV_RPFILTER(in_dev);
+
accept_local = IN_DEV_ACCEPT_LOCAL(in_dev);
- if (mark && !IN_DEV_SRC_VMARK(in_dev))
- fl4.flowi4_mark = 0;
+ fl4.flowi4_mark = IN_DEV_SRC_VMARK(in_dev) ? skb->mark : 0;
}
if (in_dev == NULL)
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 641a5a2..33e2c35 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -141,18 +141,8 @@
},
};
-
/* Release a nexthop info record */
-static void free_fib_info_rcu(struct rcu_head *head)
-{
- struct fib_info *fi = container_of(head, struct fib_info, rcu);
-
- if (fi->fib_metrics != (u32 *) dst_default_metrics)
- kfree(fi->fib_metrics);
- kfree(fi);
-}
-
void free_fib_info(struct fib_info *fi)
{
if (fi->fib_dead == 0) {
@@ -166,7 +156,7 @@
} endfor_nexthops(fi);
fib_info_cnt--;
release_net(fi->fib_net);
- call_rcu(&fi->rcu, free_fib_info_rcu);
+ kfree_rcu(fi, rcu);
}
void fib_release_info(struct fib_info *fi)
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index e9013d6..c779ce9 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -126,7 +126,7 @@
struct work_struct work;
struct tnode *tnode_free;
};
- struct rt_trie_node *child[0];
+ struct rt_trie_node __rcu *child[0];
};
#ifdef CONFIG_IP_FIB_TRIE_STATS
@@ -151,7 +151,7 @@
};
struct trie {
- struct rt_trie_node *trie;
+ struct rt_trie_node __rcu *trie;
#ifdef CONFIG_IP_FIB_TRIE_STATS
struct trie_use_stats stats;
#endif
@@ -177,16 +177,29 @@
static struct kmem_cache *fn_alias_kmem __read_mostly;
static struct kmem_cache *trie_leaf_kmem __read_mostly;
-static inline struct tnode *node_parent(struct rt_trie_node *node)
+/*
+ * caller must hold RTNL
+ */
+static inline struct tnode *node_parent(const struct rt_trie_node *node)
{
- return (struct tnode *)(node->parent & ~NODE_TYPE_MASK);
+ unsigned long parent;
+
+ parent = rcu_dereference_index_check(node->parent, lockdep_rtnl_is_held());
+
+ return (struct tnode *)(parent & ~NODE_TYPE_MASK);
}
-static inline struct tnode *node_parent_rcu(struct rt_trie_node *node)
+/*
+ * caller must hold RCU read lock or RTNL
+ */
+static inline struct tnode *node_parent_rcu(const struct rt_trie_node *node)
{
- struct tnode *ret = node_parent(node);
+ unsigned long parent;
- return rcu_dereference_rtnl(ret);
+ parent = rcu_dereference_index_check(node->parent, rcu_read_lock_held() ||
+ lockdep_rtnl_is_held());
+
+ return (struct tnode *)(parent & ~NODE_TYPE_MASK);
}
/* Same as rcu_assign_pointer
@@ -198,18 +211,24 @@
node->parent = (unsigned long)ptr | NODE_TYPE(node);
}
-static inline struct rt_trie_node *tnode_get_child(struct tnode *tn, unsigned int i)
+/*
+ * caller must hold RTNL
+ */
+static inline struct rt_trie_node *tnode_get_child(const struct tnode *tn, unsigned int i)
{
BUG_ON(i >= 1U << tn->bits);
- return tn->child[i];
+ return rtnl_dereference(tn->child[i]);
}
-static inline struct rt_trie_node *tnode_get_child_rcu(struct tnode *tn, unsigned int i)
+/*
+ * caller must hold RCU read lock or RTNL
+ */
+static inline struct rt_trie_node *tnode_get_child_rcu(const struct tnode *tn, unsigned int i)
{
- struct rt_trie_node *ret = tnode_get_child(tn, i);
+ BUG_ON(i >= 1U << tn->bits);
- return rcu_dereference_rtnl(ret);
+ return rcu_dereference_rtnl(tn->child[i]);
}
static inline int tnode_child_length(const struct tnode *tn)
@@ -350,14 +369,9 @@
call_rcu_bh(&l->rcu, __leaf_free_rcu);
}
-static void __leaf_info_free_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct leaf_info, rcu));
-}
-
static inline void free_leaf_info(struct leaf_info *leaf)
{
- call_rcu(&leaf->rcu, __leaf_info_free_rcu);
+ kfree_rcu(leaf, rcu);
}
static struct tnode *tnode_alloc(size_t size)
@@ -487,7 +501,7 @@
static void tnode_put_child_reorg(struct tnode *tn, int i, struct rt_trie_node *n,
int wasfull)
{
- struct rt_trie_node *chi = tn->child[i];
+ struct rt_trie_node *chi = rtnl_dereference(tn->child[i]);
int isfull;
BUG_ON(i >= 1<<tn->bits);
@@ -665,7 +679,7 @@
for (i = 0; i < tnode_child_length(tn); i++) {
struct rt_trie_node *n;
- n = tn->child[i];
+ n = rtnl_dereference(tn->child[i]);
if (!n)
continue;
@@ -679,6 +693,20 @@
return (struct rt_trie_node *) tn;
}
+
+static void tnode_clean_free(struct tnode *tn)
+{
+ int i;
+ struct tnode *tofree;
+
+ for (i = 0; i < tnode_child_length(tn); i++) {
+ tofree = (struct tnode *)rtnl_dereference(tn->child[i]);
+ if (tofree)
+ tnode_free(tofree);
+ }
+ tnode_free(tn);
+}
+
static struct tnode *inflate(struct trie *t, struct tnode *tn)
{
struct tnode *oldtnode = tn;
@@ -755,8 +783,8 @@
inode = (struct tnode *) node;
if (inode->bits == 1) {
- put_child(t, tn, 2*i, inode->child[0]);
- put_child(t, tn, 2*i+1, inode->child[1]);
+ put_child(t, tn, 2*i, rtnl_dereference(inode->child[0]));
+ put_child(t, tn, 2*i+1, rtnl_dereference(inode->child[1]));
tnode_free_safe(inode);
continue;
@@ -797,8 +825,8 @@
size = tnode_child_length(left);
for (j = 0; j < size; j++) {
- put_child(t, left, j, inode->child[j]);
- put_child(t, right, j, inode->child[j + size]);
+ put_child(t, left, j, rtnl_dereference(inode->child[j]));
+ put_child(t, right, j, rtnl_dereference(inode->child[j + size]));
}
put_child(t, tn, 2*i, resize(t, left));
put_child(t, tn, 2*i+1, resize(t, right));
@@ -808,18 +836,8 @@
tnode_free_safe(oldtnode);
return tn;
nomem:
- {
- int size = tnode_child_length(tn);
- int j;
-
- for (j = 0; j < size; j++)
- if (tn->child[j])
- tnode_free((struct tnode *)tn->child[j]);
-
- tnode_free(tn);
-
- return ERR_PTR(-ENOMEM);
- }
+ tnode_clean_free(tn);
+ return ERR_PTR(-ENOMEM);
}
static struct tnode *halve(struct trie *t, struct tnode *tn)
@@ -890,18 +908,8 @@
tnode_free_safe(oldtnode);
return tn;
nomem:
- {
- int size = tnode_child_length(tn);
- int j;
-
- for (j = 0; j < size; j++)
- if (tn->child[j])
- tnode_free((struct tnode *)tn->child[j]);
-
- tnode_free(tn);
-
- return ERR_PTR(-ENOMEM);
- }
+ tnode_clean_free(tn);
+ return ERR_PTR(-ENOMEM);
}
/* readside must use rcu_read_lock currently dump routines
@@ -1033,7 +1041,7 @@
t_key cindex;
pos = 0;
- n = t->trie;
+ n = rtnl_dereference(t->trie);
/* If we point to NULL, stop. Either the tree is empty and we should
* just put a new leaf in if, or we have reached an empty child slot,
@@ -1319,6 +1327,9 @@
}
}
+ if (!plen)
+ tb->tb_num_default++;
+
list_add_tail_rcu(&new_fa->fa_list,
(fa ? &fa->fa_list : fa_head));
@@ -1684,6 +1695,9 @@
list_del_rcu(&fa->fa_list);
+ if (!plen)
+ tb->tb_num_default--;
+
if (list_empty(fa_head)) {
hlist_del_rcu(&li->hlist);
free_leaf_info(li);
@@ -1756,7 +1770,7 @@
continue;
if (IS_LEAF(c)) {
- prefetch(p->child[idx]);
+ prefetch(rcu_dereference_rtnl(p->child[idx]));
return (struct leaf *) c;
}
@@ -1974,13 +1988,11 @@
tb->tb_id = id;
tb->tb_default = -1;
+ tb->tb_num_default = 0;
t = (struct trie *) tb->tb_data;
memset(t, 0, sizeof(*t));
- if (id == RT_TABLE_LOCAL)
- pr_info("IPv4 FIB: Using LC-trie version %s\n", VERSION);
-
return tb;
}
@@ -2272,7 +2284,7 @@
/* walk rest of this hash chain */
h = tb->tb_id & (FIB_TABLE_HASHSZ - 1);
- while ( (tb_node = rcu_dereference(tb->tb_hlist.next)) ) {
+ while ((tb_node = rcu_dereference(hlist_next_rcu(&tb->tb_hlist)))) {
tb = hlist_entry(tb_node, struct fib_table, tb_hlist);
n = fib_trie_get_first(iter, (struct trie *) tb->tb_data);
if (n)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index e5f8a71..5395e45 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -83,6 +83,7 @@
#include <net/tcp.h>
#include <net/udp.h>
#include <net/raw.h>
+#include <net/ping.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/errno.h>
@@ -108,8 +109,7 @@
__be32 times[3];
} data;
int head_len;
- struct ip_options replyopts;
- unsigned char optbuf[40];
+ struct ip_options_data replyopts;
};
/* An array of errno for error messages from dest unreach. */
@@ -234,7 +234,7 @@
*/
static inline bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
- int type, int code)
+ struct flowi4 *fl4, int type, int code)
{
struct dst_entry *dst = &rt->dst;
bool rc = true;
@@ -253,7 +253,7 @@
/* Limit if icmp type is enabled in ratemask. */
if ((1 << type) & net->ipv4.sysctl_icmp_ratemask) {
if (!rt->peer)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, fl4->daddr, 1);
rc = inet_peer_xrlim_allow(rt->peer,
net->ipv4.sysctl_icmp_ratelimit);
}
@@ -291,13 +291,14 @@
}
static void icmp_push_reply(struct icmp_bxm *icmp_param,
+ struct flowi4 *fl4,
struct ipcm_cookie *ipc, struct rtable **rt)
{
struct sock *sk;
struct sk_buff *skb;
sk = icmp_sk(dev_net((*rt)->dst.dev));
- if (ip_append_data(sk, icmp_glue_bits, icmp_param,
+ if (ip_append_data(sk, fl4, icmp_glue_bits, icmp_param,
icmp_param->data_len+icmp_param->head_len,
icmp_param->head_len,
ipc, rt, MSG_DONTWAIT) < 0) {
@@ -316,7 +317,7 @@
icmp_param->head_len, csum);
icmph->checksum = csum_fold(csum);
skb->ip_summed = CHECKSUM_NONE;
- ip_push_pending_frames(sk);
+ ip_push_pending_frames(sk, fl4);
}
}
@@ -329,11 +330,12 @@
struct ipcm_cookie ipc;
struct rtable *rt = skb_rtable(skb);
struct net *net = dev_net(rt->dst.dev);
+ struct flowi4 fl4;
struct sock *sk;
struct inet_sock *inet;
__be32 daddr;
- if (ip_options_echo(&icmp_param->replyopts, skb))
+ if (ip_options_echo(&icmp_param->replyopts.opt.opt, skb))
return;
sk = icmp_xmit_lock(net);
@@ -344,65 +346,60 @@
icmp_param->data.icmph.checksum = 0;
inet->tos = ip_hdr(skb)->tos;
- daddr = ipc.addr = rt->rt_src;
+ daddr = ipc.addr = ip_hdr(skb)->saddr;
ipc.opt = NULL;
ipc.tx_flags = 0;
- if (icmp_param->replyopts.optlen) {
- ipc.opt = &icmp_param->replyopts;
- if (ipc.opt->srr)
- daddr = icmp_param->replyopts.faddr;
+ if (icmp_param->replyopts.opt.opt.optlen) {
+ ipc.opt = &icmp_param->replyopts.opt;
+ if (ipc.opt->opt.srr)
+ daddr = icmp_param->replyopts.opt.opt.faddr;
}
- {
- struct flowi4 fl4 = {
- .daddr = daddr,
- .saddr = rt->rt_spec_dst,
- .flowi4_tos = RT_TOS(ip_hdr(skb)->tos),
- .flowi4_proto = IPPROTO_ICMP,
- };
- security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
- rt = ip_route_output_key(net, &fl4);
- if (IS_ERR(rt))
- goto out_unlock;
- }
- if (icmpv4_xrlim_allow(net, rt, icmp_param->data.icmph.type,
+ memset(&fl4, 0, sizeof(fl4));
+ fl4.daddr = daddr;
+ fl4.saddr = rt->rt_spec_dst;
+ fl4.flowi4_tos = RT_TOS(ip_hdr(skb)->tos);
+ fl4.flowi4_proto = IPPROTO_ICMP;
+ security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
+ rt = ip_route_output_key(net, &fl4);
+ if (IS_ERR(rt))
+ goto out_unlock;
+ if (icmpv4_xrlim_allow(net, rt, &fl4, icmp_param->data.icmph.type,
icmp_param->data.icmph.code))
- icmp_push_reply(icmp_param, &ipc, &rt);
+ icmp_push_reply(icmp_param, &fl4, &ipc, &rt);
ip_rt_put(rt);
out_unlock:
icmp_xmit_unlock(sk);
}
-static struct rtable *icmp_route_lookup(struct net *net, struct sk_buff *skb_in,
- struct iphdr *iph,
+static struct rtable *icmp_route_lookup(struct net *net,
+ struct flowi4 *fl4,
+ struct sk_buff *skb_in,
+ const struct iphdr *iph,
__be32 saddr, u8 tos,
int type, int code,
struct icmp_bxm *param)
{
- struct flowi4 fl4 = {
- .daddr = (param->replyopts.srr ?
- param->replyopts.faddr : iph->saddr),
- .saddr = saddr,
- .flowi4_tos = RT_TOS(tos),
- .flowi4_proto = IPPROTO_ICMP,
- .fl4_icmp_type = type,
- .fl4_icmp_code = code,
- };
struct rtable *rt, *rt2;
int err;
- security_skb_classify_flow(skb_in, flowi4_to_flowi(&fl4));
- rt = __ip_route_output_key(net, &fl4);
+ memset(fl4, 0, sizeof(*fl4));
+ fl4->daddr = (param->replyopts.opt.opt.srr ?
+ param->replyopts.opt.opt.faddr : iph->saddr);
+ fl4->saddr = saddr;
+ fl4->flowi4_tos = RT_TOS(tos);
+ fl4->flowi4_proto = IPPROTO_ICMP;
+ fl4->fl4_icmp_type = type;
+ fl4->fl4_icmp_code = code;
+ security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
+ rt = __ip_route_output_key(net, fl4);
if (IS_ERR(rt))
return rt;
/* No need to clone since we're just using its address. */
rt2 = rt;
- if (!fl4.saddr)
- fl4.saddr = rt->rt_src;
-
rt = (struct rtable *) xfrm_lookup(net, &rt->dst,
- flowi4_to_flowi(&fl4), NULL, 0);
+ flowi4_to_flowi(fl4), NULL, 0);
if (!IS_ERR(rt)) {
if (rt != rt2)
return rt;
@@ -411,19 +408,19 @@
} else
return rt;
- err = xfrm_decode_session_reverse(skb_in, flowi4_to_flowi(&fl4), AF_INET);
+ err = xfrm_decode_session_reverse(skb_in, flowi4_to_flowi(fl4), AF_INET);
if (err)
goto relookup_failed;
- if (inet_addr_type(net, fl4.saddr) == RTN_LOCAL) {
- rt2 = __ip_route_output_key(net, &fl4);
+ if (inet_addr_type(net, fl4->saddr) == RTN_LOCAL) {
+ rt2 = __ip_route_output_key(net, fl4);
if (IS_ERR(rt2))
err = PTR_ERR(rt2);
} else {
struct flowi4 fl4_2 = {};
unsigned long orefdst;
- fl4_2.daddr = fl4.saddr;
+ fl4_2.daddr = fl4->saddr;
rt2 = ip_route_output_key(net, &fl4_2);
if (IS_ERR(rt2)) {
err = PTR_ERR(rt2);
@@ -431,7 +428,7 @@
}
/* Ugh! */
orefdst = skb_in->_skb_refdst; /* save old refdst */
- err = ip_route_input(skb_in, fl4.daddr, fl4.saddr,
+ err = ip_route_input(skb_in, fl4->daddr, fl4->saddr,
RT_TOS(tos), rt2->dst.dev);
dst_release(&rt2->dst);
@@ -443,7 +440,7 @@
goto relookup_failed;
rt2 = (struct rtable *) xfrm_lookup(net, &rt2->dst,
- flowi4_to_flowi(&fl4), NULL,
+ flowi4_to_flowi(fl4), NULL,
XFRM_LOOKUP_ICMP);
if (!IS_ERR(rt2)) {
dst_release(&rt->dst);
@@ -482,6 +479,7 @@
struct icmp_bxm icmp_param;
struct rtable *rt = skb_rtable(skb_in);
struct ipcm_cookie ipc;
+ struct flowi4 fl4;
__be32 saddr;
u8 tos;
struct net *net;
@@ -581,7 +579,7 @@
IPTOS_PREC_INTERNETCONTROL) :
iph->tos;
- if (ip_options_echo(&icmp_param.replyopts, skb_in))
+ if (ip_options_echo(&icmp_param.replyopts.opt.opt, skb_in))
goto out_unlock;
@@ -597,15 +595,15 @@
icmp_param.offset = skb_network_offset(skb_in);
inet_sk(sk)->tos = tos;
ipc.addr = iph->saddr;
- ipc.opt = &icmp_param.replyopts;
+ ipc.opt = &icmp_param.replyopts.opt;
ipc.tx_flags = 0;
- rt = icmp_route_lookup(net, skb_in, iph, saddr, tos,
+ rt = icmp_route_lookup(net, &fl4, skb_in, iph, saddr, tos,
type, code, &icmp_param);
if (IS_ERR(rt))
goto out_unlock;
- if (!icmpv4_xrlim_allow(net, rt, type, code))
+ if (!icmpv4_xrlim_allow(net, rt, &fl4, type, code))
goto ende;
/* RFC says return as much as we can without exceeding 576 bytes. */
@@ -613,7 +611,7 @@
room = dst_mtu(&rt->dst);
if (room > 576)
room = 576;
- room -= sizeof(struct iphdr) + icmp_param.replyopts.optlen;
+ room -= sizeof(struct iphdr) + icmp_param.replyopts.opt.opt.optlen;
room -= sizeof(struct icmphdr);
icmp_param.data_len = skb_in->len - icmp_param.offset;
@@ -621,7 +619,7 @@
icmp_param.data_len = room;
icmp_param.head_len = sizeof(struct icmphdr);
- icmp_push_reply(&icmp_param, &ipc, &rt);
+ icmp_push_reply(&icmp_param, &fl4, &ipc, &rt);
ende:
ip_rt_put(rt);
out_unlock:
@@ -637,7 +635,7 @@
static void icmp_unreach(struct sk_buff *skb)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
struct icmphdr *icmph;
int hash, protocol;
const struct net_protocol *ipprot;
@@ -656,7 +654,7 @@
goto out_err;
icmph = icmp_hdr(skb);
- iph = (struct iphdr *)skb->data;
+ iph = (const struct iphdr *)skb->data;
if (iph->ihl < 5) /* Mangled header, drop. */
goto out_err;
@@ -729,7 +727,7 @@
if (!pskb_may_pull(skb, iph->ihl * 4 + 8))
goto out;
- iph = (struct iphdr *)skb->data;
+ iph = (const struct iphdr *)skb->data;
protocol = iph->protocol;
/*
@@ -758,7 +756,7 @@
static void icmp_redirect(struct sk_buff *skb)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
if (skb->len < sizeof(struct iphdr))
goto out_err;
@@ -769,7 +767,7 @@
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
goto out;
- iph = (struct iphdr *)skb->data;
+ iph = (const struct iphdr *)skb->data;
switch (icmp_hdr(skb)->code & 7) {
case ICMP_REDIR_NET:
@@ -784,6 +782,15 @@
iph->saddr, skb->dev);
break;
}
+
+ /* Ping wants to see redirects.
+ * Let's pretend they are errors of sorts... */
+ if (iph->protocol == IPPROTO_ICMP &&
+ iph->ihl >= 5 &&
+ pskb_may_pull(skb, (iph->ihl<<2)+8)) {
+ ping_err(skb, icmp_hdr(skb)->un.gateway);
+ }
+
out:
return;
out_err:
@@ -933,12 +940,12 @@
BUG_ON(mp == NULL);
for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
if (*mp == ifa->ifa_mask &&
- inet_ifa_match(rt->rt_src, ifa))
+ inet_ifa_match(ip_hdr(skb)->saddr, ifa))
break;
}
if (!ifa && net_ratelimit()) {
printk(KERN_INFO "Wrong address mask %pI4 from %s/%pI4\n",
- mp, dev->name, &rt->rt_src);
+ mp, dev->name, &ip_hdr(skb)->saddr);
}
}
}
@@ -1044,7 +1051,7 @@
*/
static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
[ICMP_ECHOREPLY] = {
- .handler = icmp_discard,
+ .handler = ping_rcv,
},
[1] = {
.handler = icmp_discard,
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 1fd3d9c..672e476 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -149,17 +149,11 @@
static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
int sfcount, __be32 *psfsrc, int delta);
-
-static void ip_mc_list_reclaim(struct rcu_head *head)
-{
- kfree(container_of(head, struct ip_mc_list, rcu));
-}
-
static void ip_ma_put(struct ip_mc_list *im)
{
if (atomic_dec_and_test(&im->refcnt)) {
in_dev_put(im->interface);
- call_rcu(&im->rcu, ip_mc_list_reclaim);
+ kfree_rcu(im, rcu);
}
}
@@ -309,6 +303,7 @@
struct iphdr *pip;
struct igmpv3_report *pig;
struct net *net = dev_net(dev);
+ struct flowi4 fl4;
while (1) {
skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev),
@@ -321,18 +316,13 @@
}
igmp_skb_size(skb) = size;
- rt = ip_route_output_ports(net, NULL, IGMPV3_ALL_MCR, 0,
+ rt = ip_route_output_ports(net, &fl4, NULL, IGMPV3_ALL_MCR, 0,
0, 0,
IPPROTO_IGMP, 0, dev->ifindex);
if (IS_ERR(rt)) {
kfree_skb(skb);
return NULL;
}
- if (rt->rt_src == 0) {
- kfree_skb(skb);
- ip_rt_put(rt);
- return NULL;
- }
skb_dst_set(skb, &rt->dst);
skb->dev = dev;
@@ -348,8 +338,8 @@
pip->tos = 0xc0;
pip->frag_off = htons(IP_DF);
pip->ttl = 1;
- pip->daddr = rt->rt_dst;
- pip->saddr = rt->rt_src;
+ pip->daddr = fl4.daddr;
+ pip->saddr = fl4.saddr;
pip->protocol = IPPROTO_IGMP;
pip->tot_len = 0; /* filled in later */
ip_select_ident(pip, &rt->dst, NULL);
@@ -655,6 +645,7 @@
struct net_device *dev = in_dev->dev;
struct net *net = dev_net(dev);
__be32 group = pmc ? pmc->multiaddr : 0;
+ struct flowi4 fl4;
__be32 dst;
if (type == IGMPV3_HOST_MEMBERSHIP_REPORT)
@@ -664,17 +655,12 @@
else
dst = group;
- rt = ip_route_output_ports(net, NULL, dst, 0,
+ rt = ip_route_output_ports(net, &fl4, NULL, dst, 0,
0, 0,
IPPROTO_IGMP, 0, dev->ifindex);
if (IS_ERR(rt))
return -1;
- if (rt->rt_src == 0) {
- ip_rt_put(rt);
- return -1;
- }
-
skb = alloc_skb(IGMP_SIZE+LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
if (skb == NULL) {
ip_rt_put(rt);
@@ -695,7 +681,7 @@
iph->frag_off = htons(IP_DF);
iph->ttl = 1;
iph->daddr = dst;
- iph->saddr = rt->rt_src;
+ iph->saddr = fl4.saddr;
iph->protocol = IPPROTO_IGMP;
ip_select_ident(iph, &rt->dst, NULL);
((u8*)&iph[1])[0] = IPOPT_RA;
@@ -1836,12 +1822,6 @@
}
EXPORT_SYMBOL(ip_mc_join_group);
-static void ip_sf_socklist_reclaim(struct rcu_head *rp)
-{
- kfree(container_of(rp, struct ip_sf_socklist, rcu));
- /* sk_omem_alloc should have been decreased by the caller*/
-}
-
static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml,
struct in_device *in_dev)
{
@@ -1858,18 +1838,10 @@
rcu_assign_pointer(iml->sflist, NULL);
/* decrease mem now to avoid the memleak warning */
atomic_sub(IP_SFLSIZE(psf->sl_max), &sk->sk_omem_alloc);
- call_rcu(&psf->rcu, ip_sf_socklist_reclaim);
+ kfree_rcu(psf, rcu);
return err;
}
-
-static void ip_mc_socklist_reclaim(struct rcu_head *rp)
-{
- kfree(container_of(rp, struct ip_mc_socklist, rcu));
- /* sk_omem_alloc should have been decreased by the caller*/
-}
-
-
/*
* Ask a socket to leave a group.
*/
@@ -1909,7 +1881,7 @@
rtnl_unlock();
/* decrease mem now to avoid the memleak warning */
atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
- call_rcu(&iml->rcu, ip_mc_socklist_reclaim);
+ kfree_rcu(iml, rcu);
return 0;
}
if (!in_dev)
@@ -2026,7 +1998,7 @@
newpsl->sl_addr[i] = psl->sl_addr[i];
/* decrease mem now to avoid the memleak warning */
atomic_sub(IP_SFLSIZE(psl->sl_max), &sk->sk_omem_alloc);
- call_rcu(&psl->rcu, ip_sf_socklist_reclaim);
+ kfree_rcu(psl, rcu);
}
rcu_assign_pointer(pmc->sflist, newpsl);
psl = newpsl;
@@ -2127,7 +2099,7 @@
psl->sl_count, psl->sl_addr, 0);
/* decrease mem now to avoid the memleak warning */
atomic_sub(IP_SFLSIZE(psl->sl_max), &sk->sk_omem_alloc);
- call_rcu(&psl->rcu, ip_sf_socklist_reclaim);
+ kfree_rcu(psl, rcu);
} else
(void) ip_mc_del_src(in_dev, &msf->imsf_multiaddr, pmc->sfmode,
0, NULL, 0);
@@ -2324,7 +2296,7 @@
ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
/* decrease mem now to avoid the memleak warning */
atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
- call_rcu(&iml->rcu, ip_mc_socklist_reclaim);
+ kfree_rcu(iml, rcu);
}
rtnl_unlock();
}
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 38f23e7..61fac4c 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -350,30 +350,24 @@
EXPORT_SYMBOL(inet_csk_reset_keepalive_timer);
struct dst_entry *inet_csk_route_req(struct sock *sk,
+ struct flowi4 *fl4,
const struct request_sock *req)
{
struct rtable *rt;
const struct inet_request_sock *ireq = inet_rsk(req);
- struct ip_options *opt = inet_rsk(req)->opt;
- struct flowi4 fl4 = {
- .flowi4_oif = sk->sk_bound_dev_if,
- .flowi4_mark = sk->sk_mark,
- .daddr = ((opt && opt->srr) ?
- opt->faddr : ireq->rmt_addr),
- .saddr = ireq->loc_addr,
- .flowi4_tos = RT_CONN_FLAGS(sk),
- .flowi4_proto = sk->sk_protocol,
- .flowi4_flags = inet_sk_flowi_flags(sk),
- .fl4_sport = inet_sk(sk)->inet_sport,
- .fl4_dport = ireq->rmt_port,
- };
+ struct ip_options_rcu *opt = inet_rsk(req)->opt;
struct net *net = sock_net(sk);
- security_req_classify_flow(req, flowi4_to_flowi(&fl4));
- rt = ip_route_output_flow(net, &fl4, sk);
+ flowi4_init_output(fl4, sk->sk_bound_dev_if, sk->sk_mark,
+ RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE,
+ sk->sk_protocol, inet_sk_flowi_flags(sk),
+ (opt && opt->opt.srr) ? opt->opt.faddr : ireq->rmt_addr,
+ ireq->loc_addr, ireq->rmt_port, inet_sk(sk)->inet_sport);
+ security_req_classify_flow(req, flowi4_to_flowi(fl4));
+ rt = ip_route_output_flow(net, fl4, sk);
if (IS_ERR(rt))
goto no_route;
- if (opt && opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
+ if (opt && opt->opt.is_strictroute && fl4->daddr != rt->rt_gateway)
goto route_err;
return &rt->dst;
@@ -385,6 +379,39 @@
}
EXPORT_SYMBOL_GPL(inet_csk_route_req);
+struct dst_entry *inet_csk_route_child_sock(struct sock *sk,
+ struct sock *newsk,
+ const struct request_sock *req)
+{
+ const struct inet_request_sock *ireq = inet_rsk(req);
+ struct inet_sock *newinet = inet_sk(newsk);
+ struct ip_options_rcu *opt = ireq->opt;
+ struct net *net = sock_net(sk);
+ struct flowi4 *fl4;
+ struct rtable *rt;
+
+ fl4 = &newinet->cork.fl.u.ip4;
+ flowi4_init_output(fl4, sk->sk_bound_dev_if, sk->sk_mark,
+ RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE,
+ sk->sk_protocol, inet_sk_flowi_flags(sk),
+ (opt && opt->opt.srr) ? opt->opt.faddr : ireq->rmt_addr,
+ ireq->loc_addr, ireq->rmt_port, inet_sk(sk)->inet_sport);
+ security_req_classify_flow(req, flowi4_to_flowi(fl4));
+ rt = ip_route_output_flow(net, fl4, sk);
+ if (IS_ERR(rt))
+ goto no_route;
+ if (opt && opt->opt.is_strictroute && fl4->daddr != rt->rt_gateway)
+ goto route_err;
+ return &rt->dst;
+
+route_err:
+ ip_rt_put(rt);
+no_route:
+ IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(inet_csk_route_child_sock);
+
static inline u32 inet_synq_hash(const __be32 raddr, const __be16 rport,
const u32 rnd, const u32 synq_hsize)
{
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 2ada171..6ffe94c 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -124,7 +124,7 @@
#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
if (r->idiag_family == AF_INET6) {
- struct ipv6_pinfo *np = inet6_sk(sk);
+ const struct ipv6_pinfo *np = inet6_sk(sk);
ipv6_addr_copy((struct in6_addr *)r->id.idiag_src,
&np->rcv_saddr);
diff --git a/net/ipv4/inet_lro.c b/net/ipv4/inet_lro.c
index 47038cb..85a0f75 100644
--- a/net/ipv4/inet_lro.c
+++ b/net/ipv4/inet_lro.c
@@ -51,8 +51,8 @@
* Basic tcp checks whether packet is suitable for LRO
*/
-static int lro_tcp_ip_check(struct iphdr *iph, struct tcphdr *tcph,
- int len, struct net_lro_desc *lro_desc)
+static int lro_tcp_ip_check(const struct iphdr *iph, const struct tcphdr *tcph,
+ int len, const struct net_lro_desc *lro_desc)
{
/* check ip header: don't aggregate padded frames */
if (ntohs(iph->tot_len) != len)
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 99461f0..3b34d1c 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -84,7 +84,7 @@
rt = skb_rtable(skb);
- if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
+ if (opt->is_strictroute && ip_hdr(skb)->daddr != rt->rt_gateway)
goto sr_failed;
if (unlikely(skb->len > dst_mtu(&rt->dst) && !skb_is_gso(skb) &&
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index a1151b8..0ad6035 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -77,22 +77,40 @@
struct inet_peer *peer;
};
-#define IPFRAG_ECN_CLEAR 0x01 /* one frag had INET_ECN_NOT_ECT */
-#define IPFRAG_ECN_SET_CE 0x04 /* one frag had INET_ECN_CE */
+/* RFC 3168 support :
+ * We want to check ECN values of all fragments, do detect invalid combinations.
+ * In ipq->ecn, we store the OR value of each ip4_frag_ecn() fragment value.
+ */
+#define IPFRAG_ECN_NOT_ECT 0x01 /* one frag had ECN_NOT_ECT */
+#define IPFRAG_ECN_ECT_1 0x02 /* one frag had ECN_ECT_1 */
+#define IPFRAG_ECN_ECT_0 0x04 /* one frag had ECN_ECT_0 */
+#define IPFRAG_ECN_CE 0x08 /* one frag had ECN_CE */
static inline u8 ip4_frag_ecn(u8 tos)
{
- tos = (tos & INET_ECN_MASK) + 1;
- /*
- * After the last operation we have (in binary):
- * INET_ECN_NOT_ECT => 001
- * INET_ECN_ECT_1 => 010
- * INET_ECN_ECT_0 => 011
- * INET_ECN_CE => 100
- */
- return (tos & 2) ? 0 : tos;
+ return 1 << (tos & INET_ECN_MASK);
}
+/* Given the OR values of all fragments, apply RFC 3168 5.3 requirements
+ * Value : 0xff if frame should be dropped.
+ * 0 or INET_ECN_CE value, to be ORed in to final iph->tos field
+ */
+static const u8 ip4_frag_ecn_table[16] = {
+ /* at least one fragment had CE, and others ECT_0 or ECT_1 */
+ [IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0] = INET_ECN_CE,
+ [IPFRAG_ECN_CE | IPFRAG_ECN_ECT_1] = INET_ECN_CE,
+ [IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0 | IPFRAG_ECN_ECT_1] = INET_ECN_CE,
+
+ /* invalid combinations : drop frame */
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE] = 0xff,
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_ECT_0] = 0xff,
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_ECT_1] = 0xff,
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_ECT_0 | IPFRAG_ECN_ECT_1] = 0xff,
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0] = 0xff,
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE | IPFRAG_ECN_ECT_1] = 0xff,
+ [IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0 | IPFRAG_ECN_ECT_1] = 0xff,
+};
+
static struct inet_frags ip4_frags;
int ip_frag_nqueues(struct net *net)
@@ -223,31 +241,30 @@
if ((qp->q.last_in & INET_FRAG_FIRST_IN) && qp->q.fragments != NULL) {
struct sk_buff *head = qp->q.fragments;
+ const struct iphdr *iph;
+ int err;
rcu_read_lock();
head->dev = dev_get_by_index_rcu(net, qp->iif);
if (!head->dev)
goto out_rcu_unlock;
+ /* skb dst is stale, drop it, and perform route lookup again */
+ skb_dst_drop(head);
+ iph = ip_hdr(head);
+ err = ip_route_input_noref(head, iph->daddr, iph->saddr,
+ iph->tos, head->dev);
+ if (err)
+ goto out_rcu_unlock;
+
/*
- * Only search router table for the head fragment,
- * when defraging timeout at PRE_ROUTING HOOK.
+ * Only an end host needs to send an ICMP
+ * "Fragment Reassembly Timeout" message, per RFC792.
*/
- if (qp->user == IP_DEFRAG_CONNTRACK_IN && !skb_dst(head)) {
- const struct iphdr *iph = ip_hdr(head);
- int err = ip_route_input(head, iph->daddr, iph->saddr,
- iph->tos, head->dev);
- if (unlikely(err))
- goto out_rcu_unlock;
+ if (qp->user == IP_DEFRAG_CONNTRACK_IN &&
+ skb_rtable(head)->rt_type != RTN_LOCAL)
+ goto out_rcu_unlock;
- /*
- * Only an end host needs to send an ICMP
- * "Fragment Reassembly Timeout" message, per RFC792.
- */
- if (skb_rtable(head)->rt_type != RTN_LOCAL)
- goto out_rcu_unlock;
-
- }
/* Send an ICMP "Fragment Reassembly Timeout" message. */
icmp_send(head, ICMP_TIME_EXCEEDED, ICMP_EXC_FRAGTIME, 0);
@@ -525,9 +542,15 @@
int len;
int ihlen;
int err;
+ u8 ecn;
ipq_kill(qp);
+ ecn = ip4_frag_ecn_table[qp->ecn];
+ if (unlikely(ecn == 0xff)) {
+ err = -EINVAL;
+ goto out_fail;
+ }
/* Make the one we just received the head. */
if (prev) {
head = prev->next;
@@ -606,17 +629,7 @@
iph = ip_hdr(head);
iph->frag_off = 0;
iph->tot_len = htons(len);
- /* RFC3168 5.3 Fragmentation support
- * If one fragment had INET_ECN_NOT_ECT,
- * reassembled frame also has INET_ECN_NOT_ECT
- * Elif one fragment had INET_ECN_CE
- * reassembled frame also has INET_ECN_CE
- */
- if (qp->ecn & IPFRAG_ECN_CLEAR)
- iph->tos &= ~INET_ECN_MASK;
- else if (qp->ecn & IPFRAG_ECN_SET_CE)
- iph->tos |= INET_ECN_CE;
-
+ iph->tos |= ecn;
IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
qp->q.fragments = NULL;
qp->q.fragments_tail = NULL;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index da5941f..8871067 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -413,11 +413,6 @@
dev_net_set(dev, net);
- if (strchr(name, '%')) {
- if (dev_alloc_name(dev, name) < 0)
- goto failed_free;
- }
-
nt = netdev_priv(dev);
nt->parms = *parms;
dev->rtnl_link_ops = &ipgre_link_ops;
@@ -462,7 +457,7 @@
by themself???
*/
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
__be16 *p = (__be16*)(skb->data+(iph->ihl<<2));
int grehlen = (iph->ihl<<2) + 4;
const int type = icmp_hdr(skb)->type;
@@ -534,7 +529,7 @@
rcu_read_unlock();
}
-static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
+static inline void ipgre_ecn_decapsulate(const struct iphdr *iph, struct sk_buff *skb)
{
if (INET_ECN_is_ce(iph->tos)) {
if (skb->protocol == htons(ETH_P_IP)) {
@@ -546,19 +541,19 @@
}
static inline u8
-ipgre_ecn_encapsulate(u8 tos, struct iphdr *old_iph, struct sk_buff *skb)
+ipgre_ecn_encapsulate(u8 tos, const struct iphdr *old_iph, struct sk_buff *skb)
{
u8 inner = 0;
if (skb->protocol == htons(ETH_P_IP))
inner = old_iph->tos;
else if (skb->protocol == htons(ETH_P_IPV6))
- inner = ipv6_get_dsfield((struct ipv6hdr *)old_iph);
+ inner = ipv6_get_dsfield((const struct ipv6hdr *)old_iph);
return INET_ECN_encapsulate(tos, inner);
}
static int ipgre_rcv(struct sk_buff *skb)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
u8 *h;
__be16 flags;
__sum16 csum = 0;
@@ -697,8 +692,9 @@
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct pcpu_tstats *tstats;
- struct iphdr *old_iph = ip_hdr(skb);
- struct iphdr *tiph;
+ const struct iphdr *old_iph = ip_hdr(skb);
+ const struct iphdr *tiph;
+ struct flowi4 fl4;
u8 tos;
__be16 df;
struct rtable *rt; /* Route to the other host */
@@ -714,7 +710,7 @@
if (dev->header_ops && dev->type == ARPHRD_IPGRE) {
gre_hlen = 0;
- tiph = (struct iphdr *)skb->data;
+ tiph = (const struct iphdr *)skb->data;
} else {
gre_hlen = tunnel->hlen;
tiph = &tunnel->parms.iph;
@@ -735,14 +731,14 @@
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
else if (skb->protocol == htons(ETH_P_IPV6)) {
- struct in6_addr *addr6;
+ const struct in6_addr *addr6;
int addr_type;
struct neighbour *neigh = skb_dst(skb)->neighbour;
if (neigh == NULL)
goto tx_error;
- addr6 = (struct in6_addr *)&neigh->primary_key;
+ addr6 = (const struct in6_addr *)&neigh->primary_key;
addr_type = ipv6_addr_type(addr6);
if (addr_type == IPV6_ADDR_ANY) {
@@ -766,10 +762,10 @@
if (skb->protocol == htons(ETH_P_IP))
tos = old_iph->tos;
else if (skb->protocol == htons(ETH_P_IPV6))
- tos = ipv6_get_dsfield((struct ipv6hdr *)old_iph);
+ tos = ipv6_get_dsfield((const struct ipv6hdr *)old_iph);
}
- rt = ip_route_output_gre(dev_net(dev), dst, tiph->saddr,
+ rt = ip_route_output_gre(dev_net(dev), &fl4, dst, tiph->saddr,
tunnel->parms.o_key, RT_TOS(tos),
tunnel->parms.link);
if (IS_ERR(rt)) {
@@ -873,15 +869,15 @@
iph->frag_off = df;
iph->protocol = IPPROTO_GRE;
iph->tos = ipgre_ecn_encapsulate(tos, old_iph, skb);
- iph->daddr = rt->rt_dst;
- iph->saddr = rt->rt_src;
+ iph->daddr = fl4.daddr;
+ iph->saddr = fl4.saddr;
if ((iph->ttl = tiph->ttl) == 0) {
if (skb->protocol == htons(ETH_P_IP))
iph->ttl = old_iph->ttl;
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
else if (skb->protocol == htons(ETH_P_IPV6))
- iph->ttl = ((struct ipv6hdr *)old_iph)->hop_limit;
+ iph->ttl = ((const struct ipv6hdr *)old_iph)->hop_limit;
#endif
else
iph->ttl = ip4_dst_hoplimit(&rt->dst);
@@ -927,7 +923,7 @@
{
struct net_device *tdev = NULL;
struct ip_tunnel *tunnel;
- struct iphdr *iph;
+ const struct iphdr *iph;
int hlen = LL_MAX_HEADER;
int mtu = ETH_DATA_LEN;
int addend = sizeof(struct iphdr) + 4;
@@ -938,12 +934,14 @@
/* Guess output device to choose reasonable mtu and needed_headroom */
if (iph->daddr) {
- struct rtable *rt = ip_route_output_gre(dev_net(dev),
- iph->daddr, iph->saddr,
- tunnel->parms.o_key,
- RT_TOS(iph->tos),
- tunnel->parms.link);
+ struct flowi4 fl4;
+ struct rtable *rt;
+ rt = ip_route_output_gre(dev_net(dev), &fl4,
+ iph->daddr, iph->saddr,
+ tunnel->parms.o_key,
+ RT_TOS(iph->tos),
+ tunnel->parms.link);
if (!IS_ERR(rt)) {
tdev = rt->dst.dev;
ip_rt_put(rt);
@@ -1180,7 +1178,7 @@
static int ipgre_header_parse(const struct sk_buff *skb, unsigned char *haddr)
{
- struct iphdr *iph = (struct iphdr *) skb_mac_header(skb);
+ const struct iphdr *iph = (const struct iphdr *) skb_mac_header(skb);
memcpy(haddr, &iph->saddr, 4);
return 4;
}
@@ -1196,13 +1194,15 @@
struct ip_tunnel *t = netdev_priv(dev);
if (ipv4_is_multicast(t->parms.iph.daddr)) {
- struct rtable *rt = ip_route_output_gre(dev_net(dev),
- t->parms.iph.daddr,
- t->parms.iph.saddr,
- t->parms.o_key,
- RT_TOS(t->parms.iph.tos),
- t->parms.link);
+ struct flowi4 fl4;
+ struct rtable *rt;
+ rt = ip_route_output_gre(dev_net(dev), &fl4,
+ t->parms.iph.daddr,
+ t->parms.iph.saddr,
+ t->parms.o_key,
+ RT_TOS(t->parms.iph.tos),
+ t->parms.link);
if (IS_ERR(rt))
return -EADDRNOTAVAIL;
dev = rt->dst.dev;
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index d7b2b09..c8f48ef 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -268,7 +268,7 @@
static inline int ip_rcv_options(struct sk_buff *skb)
{
struct ip_options *opt;
- struct iphdr *iph;
+ const struct iphdr *iph;
struct net_device *dev = skb->dev;
/* It looks as overkill, because not all
@@ -374,7 +374,7 @@
*/
int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
u32 len;
/* When the interface is in promisc. mode, drop all the crap
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index 2391b24..c3118e1 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -36,8 +36,8 @@
* saddr is address of outgoing interface.
*/
-void ip_options_build(struct sk_buff * skb, struct ip_options * opt,
- __be32 daddr, struct rtable *rt, int is_frag)
+void ip_options_build(struct sk_buff *skb, struct ip_options *opt,
+ __be32 daddr, struct rtable *rt, int is_frag)
{
unsigned char *iph = skb_network_header(skb);
@@ -50,9 +50,9 @@
if (!is_frag) {
if (opt->rr_needaddr)
- ip_rt_get_source(iph+opt->rr+iph[opt->rr+2]-5, rt);
+ ip_rt_get_source(iph+opt->rr+iph[opt->rr+2]-5, skb, rt);
if (opt->ts_needaddr)
- ip_rt_get_source(iph+opt->ts+iph[opt->ts+2]-9, rt);
+ ip_rt_get_source(iph+opt->ts+iph[opt->ts+2]-9, skb, rt);
if (opt->ts_needtime) {
struct timespec tv;
__be32 midtime;
@@ -83,9 +83,9 @@
* NOTE: dopt cannot point to skb.
*/
-int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
+int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb)
{
- struct ip_options *sopt;
+ const struct ip_options *sopt;
unsigned char *sptr, *dptr;
int soffset, doffset;
int optlen;
@@ -95,10 +95,8 @@
sopt = &(IPCB(skb)->opt);
- if (sopt->optlen == 0) {
- dopt->optlen = 0;
+ if (sopt->optlen == 0)
return 0;
- }
sptr = skb_network_header(skb);
dptr = dopt->__data;
@@ -157,7 +155,7 @@
dopt->optlen += optlen;
}
if (sopt->srr) {
- unsigned char * start = sptr+sopt->srr;
+ unsigned char *start = sptr+sopt->srr;
__be32 faddr;
optlen = start[1];
@@ -499,19 +497,19 @@
}
}
-static struct ip_options *ip_options_get_alloc(const int optlen)
+static struct ip_options_rcu *ip_options_get_alloc(const int optlen)
{
- return kzalloc(sizeof(struct ip_options) + ((optlen + 3) & ~3),
+ return kzalloc(sizeof(struct ip_options_rcu) + ((optlen + 3) & ~3),
GFP_KERNEL);
}
-static int ip_options_get_finish(struct net *net, struct ip_options **optp,
- struct ip_options *opt, int optlen)
+static int ip_options_get_finish(struct net *net, struct ip_options_rcu **optp,
+ struct ip_options_rcu *opt, int optlen)
{
while (optlen & 3)
- opt->__data[optlen++] = IPOPT_END;
- opt->optlen = optlen;
- if (optlen && ip_options_compile(net, opt, NULL)) {
+ opt->opt.__data[optlen++] = IPOPT_END;
+ opt->opt.optlen = optlen;
+ if (optlen && ip_options_compile(net, &opt->opt, NULL)) {
kfree(opt);
return -EINVAL;
}
@@ -520,29 +518,29 @@
return 0;
}
-int ip_options_get_from_user(struct net *net, struct ip_options **optp,
+int ip_options_get_from_user(struct net *net, struct ip_options_rcu **optp,
unsigned char __user *data, int optlen)
{
- struct ip_options *opt = ip_options_get_alloc(optlen);
+ struct ip_options_rcu *opt = ip_options_get_alloc(optlen);
if (!opt)
return -ENOMEM;
- if (optlen && copy_from_user(opt->__data, data, optlen)) {
+ if (optlen && copy_from_user(opt->opt.__data, data, optlen)) {
kfree(opt);
return -EFAULT;
}
return ip_options_get_finish(net, optp, opt, optlen);
}
-int ip_options_get(struct net *net, struct ip_options **optp,
+int ip_options_get(struct net *net, struct ip_options_rcu **optp,
unsigned char *data, int optlen)
{
- struct ip_options *opt = ip_options_get_alloc(optlen);
+ struct ip_options_rcu *opt = ip_options_get_alloc(optlen);
if (!opt)
return -ENOMEM;
if (optlen)
- memcpy(opt->__data, data, optlen);
+ memcpy(opt->opt.__data, data, optlen);
return ip_options_get_finish(net, optp, opt, optlen);
}
@@ -555,7 +553,7 @@
if (opt->rr_needaddr) {
optptr = (unsigned char *)raw + opt->rr;
- ip_rt_get_source(&optptr[optptr[2]-5], rt);
+ ip_rt_get_source(&optptr[optptr[2]-5], skb, rt);
opt->is_changed = 1;
}
if (opt->srr_is_hit) {
@@ -569,19 +567,18 @@
) {
if (srrptr + 3 > srrspace)
break;
- if (memcmp(&rt->rt_dst, &optptr[srrptr-1], 4) == 0)
+ if (memcmp(&ip_hdr(skb)->daddr, &optptr[srrptr-1], 4) == 0)
break;
}
if (srrptr + 3 <= srrspace) {
opt->is_changed = 1;
- ip_rt_get_source(&optptr[srrptr-1], rt);
- ip_hdr(skb)->daddr = rt->rt_dst;
+ ip_rt_get_source(&optptr[srrptr-1], skb, rt);
optptr[2] = srrptr+4;
} else if (net_ratelimit())
printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n");
if (opt->ts_needaddr) {
optptr = raw + opt->ts;
- ip_rt_get_source(&optptr[optptr[2]-9], rt);
+ ip_rt_get_source(&optptr[optptr[2]-9], skb, rt);
opt->is_changed = 1;
}
}
@@ -603,7 +600,7 @@
unsigned long orefdst;
int err;
- if (!opt->srr || !rt)
+ if (!rt)
return 0;
if (skb->pkt_type != PACKET_HOST)
@@ -637,7 +634,7 @@
if (rt2->rt_type != RTN_LOCAL)
break;
/* Superfast 8) loopback forward */
- memcpy(&iph->daddr, &optptr[srrptr-1], 4);
+ iph->daddr = nexthop;
opt->is_changed = 1;
}
if (srrptr <= srrspace) {
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 459c011..98af369 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -140,14 +140,14 @@
*
*/
int ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
- __be32 saddr, __be32 daddr, struct ip_options *opt)
+ __be32 saddr, __be32 daddr, struct ip_options_rcu *opt)
{
struct inet_sock *inet = inet_sk(sk);
struct rtable *rt = skb_rtable(skb);
struct iphdr *iph;
/* Build the IP header. */
- skb_push(skb, sizeof(struct iphdr) + (opt ? opt->optlen : 0));
+ skb_push(skb, sizeof(struct iphdr) + (opt ? opt->opt.optlen : 0));
skb_reset_network_header(skb);
iph = ip_hdr(skb);
iph->version = 4;
@@ -158,14 +158,14 @@
else
iph->frag_off = 0;
iph->ttl = ip_select_ttl(inet, &rt->dst);
- iph->daddr = rt->rt_dst;
- iph->saddr = rt->rt_src;
+ iph->daddr = (opt && opt->opt.srr ? opt->opt.faddr : daddr);
+ iph->saddr = saddr;
iph->protocol = sk->sk_protocol;
ip_select_ident(iph, &rt->dst, sk);
- if (opt && opt->optlen) {
- iph->ihl += opt->optlen>>2;
- ip_options_build(skb, opt, daddr, rt, 0);
+ if (opt && opt->opt.optlen) {
+ iph->ihl += opt->opt.optlen>>2;
+ ip_options_build(skb, &opt->opt, daddr, rt, 0);
}
skb->priority = sk->sk_priority;
@@ -312,11 +312,12 @@
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
-int ip_queue_xmit(struct sk_buff *skb)
+int ip_queue_xmit(struct sk_buff *skb, struct flowi *fl)
{
struct sock *sk = skb->sk;
struct inet_sock *inet = inet_sk(sk);
- struct ip_options *opt = inet->opt;
+ struct ip_options_rcu *inet_opt;
+ struct flowi4 *fl4;
struct rtable *rt;
struct iphdr *iph;
int res;
@@ -325,6 +326,8 @@
* f.e. by something like SCTP.
*/
rcu_read_lock();
+ inet_opt = rcu_dereference(inet->inet_opt);
+ fl4 = &fl->u.ip4;
rt = skb_rtable(skb);
if (rt != NULL)
goto packet_routed;
@@ -336,14 +339,14 @@
/* Use correct destination address if we have options. */
daddr = inet->inet_daddr;
- if(opt && opt->srr)
- daddr = opt->faddr;
+ if (inet_opt && inet_opt->opt.srr)
+ daddr = inet_opt->opt.faddr;
/* If this fails, retransmit mechanism of transport layer will
* keep trying until route appears or the connection times
* itself out.
*/
- rt = ip_route_output_ports(sock_net(sk), sk,
+ rt = ip_route_output_ports(sock_net(sk), fl4, sk,
daddr, inet->inet_saddr,
inet->inet_dport,
inet->inet_sport,
@@ -357,11 +360,11 @@
skb_dst_set_noref(skb, &rt->dst);
packet_routed:
- if (opt && opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
+ if (inet_opt && inet_opt->opt.is_strictroute && fl4->daddr != rt->rt_gateway)
goto no_route;
/* OK, we know where to send it, allocate and build IP header. */
- skb_push(skb, sizeof(struct iphdr) + (opt ? opt->optlen : 0));
+ skb_push(skb, sizeof(struct iphdr) + (inet_opt ? inet_opt->opt.optlen : 0));
skb_reset_network_header(skb);
iph = ip_hdr(skb);
*((__be16 *)iph) = htons((4 << 12) | (5 << 8) | (inet->tos & 0xff));
@@ -371,13 +374,13 @@
iph->frag_off = 0;
iph->ttl = ip_select_ttl(inet, &rt->dst);
iph->protocol = sk->sk_protocol;
- iph->saddr = rt->rt_src;
- iph->daddr = rt->rt_dst;
+ iph->saddr = fl4->saddr;
+ iph->daddr = fl4->daddr;
/* Transport layer set skb->h.foo itself. */
- if (opt && opt->optlen) {
- iph->ihl += opt->optlen >> 2;
- ip_options_build(skb, opt, inet->inet_daddr, rt, 0);
+ if (inet_opt && inet_opt->opt.optlen) {
+ iph->ihl += inet_opt->opt.optlen >> 2;
+ ip_options_build(skb, &inet_opt->opt, inet->inet_daddr, rt, 0);
}
ip_select_ident_more(iph, &rt->dst, sk,
@@ -773,7 +776,9 @@
(length - transhdrlen));
}
-static int __ip_append_data(struct sock *sk, struct sk_buff_head *queue,
+static int __ip_append_data(struct sock *sk,
+ struct flowi4 *fl4,
+ struct sk_buff_head *queue,
struct inet_cork *cork,
int getfrag(void *from, char *to, int offset,
int len, int odd, struct sk_buff *skb),
@@ -805,7 +810,7 @@
maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
if (cork->length + length > 0xFFFF - fragheaderlen) {
- ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
+ ip_local_error(sk, EMSGSIZE, fl4->daddr, inet->inet_dport,
mtu-exthdrlen);
return -EMSGSIZE;
}
@@ -1033,7 +1038,7 @@
struct ipcm_cookie *ipc, struct rtable **rtp)
{
struct inet_sock *inet = inet_sk(sk);
- struct ip_options *opt;
+ struct ip_options_rcu *opt;
struct rtable *rt;
/*
@@ -1047,7 +1052,7 @@
if (unlikely(cork->opt == NULL))
return -ENOBUFS;
}
- memcpy(cork->opt, opt, sizeof(struct ip_options) + opt->optlen);
+ memcpy(cork->opt, &opt->opt, sizeof(struct ip_options) + opt->opt.optlen);
cork->flags |= IPCORK_OPT;
cork->addr = ipc->addr;
}
@@ -1080,7 +1085,7 @@
*
* LATER: length must be adjusted by pad at tail, when it is required.
*/
-int ip_append_data(struct sock *sk,
+int ip_append_data(struct sock *sk, struct flowi4 *fl4,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int length, int transhdrlen,
@@ -1094,24 +1099,25 @@
return 0;
if (skb_queue_empty(&sk->sk_write_queue)) {
- err = ip_setup_cork(sk, &inet->cork, ipc, rtp);
+ err = ip_setup_cork(sk, &inet->cork.base, ipc, rtp);
if (err)
return err;
} else {
transhdrlen = 0;
}
- return __ip_append_data(sk, &sk->sk_write_queue, &inet->cork, getfrag,
+ return __ip_append_data(sk, fl4, &sk->sk_write_queue, &inet->cork.base, getfrag,
from, length, transhdrlen, flags);
}
-ssize_t ip_append_page(struct sock *sk, struct page *page,
+ssize_t ip_append_page(struct sock *sk, struct flowi4 *fl4, struct page *page,
int offset, size_t size, int flags)
{
struct inet_sock *inet = inet_sk(sk);
struct sk_buff *skb;
struct rtable *rt;
struct ip_options *opt = NULL;
+ struct inet_cork *cork;
int hh_len;
int mtu;
int len;
@@ -1127,28 +1133,29 @@
if (skb_queue_empty(&sk->sk_write_queue))
return -EINVAL;
- rt = (struct rtable *)inet->cork.dst;
- if (inet->cork.flags & IPCORK_OPT)
- opt = inet->cork.opt;
+ cork = &inet->cork.base;
+ rt = (struct rtable *)cork->dst;
+ if (cork->flags & IPCORK_OPT)
+ opt = cork->opt;
if (!(rt->dst.dev->features&NETIF_F_SG))
return -EOPNOTSUPP;
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
- mtu = inet->cork.fragsize;
+ mtu = cork->fragsize;
fragheaderlen = sizeof(struct iphdr) + (opt ? opt->optlen : 0);
maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
- if (inet->cork.length + size > 0xFFFF - fragheaderlen) {
- ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport, mtu);
+ if (cork->length + size > 0xFFFF - fragheaderlen) {
+ ip_local_error(sk, EMSGSIZE, fl4->daddr, inet->inet_dport, mtu);
return -EMSGSIZE;
}
if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
return -EINVAL;
- inet->cork.length += size;
+ cork->length += size;
if ((size + skb->len > mtu) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO)) {
@@ -1243,7 +1250,7 @@
return 0;
error:
- inet->cork.length -= size;
+ cork->length -= size;
IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTDISCARDS);
return err;
}
@@ -1262,6 +1269,7 @@
* and push them out.
*/
struct sk_buff *__ip_make_skb(struct sock *sk,
+ struct flowi4 *fl4,
struct sk_buff_head *queue,
struct inet_cork *cork)
{
@@ -1319,17 +1327,18 @@
iph = (struct iphdr *)skb->data;
iph->version = 4;
iph->ihl = 5;
- if (opt) {
- iph->ihl += opt->optlen>>2;
- ip_options_build(skb, opt, cork->addr, rt, 0);
- }
iph->tos = inet->tos;
iph->frag_off = df;
ip_select_ident(iph, &rt->dst, sk);
iph->ttl = ttl;
iph->protocol = sk->sk_protocol;
- iph->saddr = rt->rt_src;
- iph->daddr = rt->rt_dst;
+ iph->saddr = fl4->saddr;
+ iph->daddr = fl4->daddr;
+
+ if (opt) {
+ iph->ihl += opt->optlen>>2;
+ ip_options_build(skb, opt, cork->addr, rt, 0);
+ }
skb->priority = sk->sk_priority;
skb->mark = sk->sk_mark;
@@ -1365,11 +1374,11 @@
return err;
}
-int ip_push_pending_frames(struct sock *sk)
+int ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4)
{
struct sk_buff *skb;
- skb = ip_finish_skb(sk);
+ skb = ip_finish_skb(sk, fl4);
if (!skb)
return 0;
@@ -1394,17 +1403,18 @@
void ip_flush_pending_frames(struct sock *sk)
{
- __ip_flush_pending_frames(sk, &sk->sk_write_queue, &inet_sk(sk)->cork);
+ __ip_flush_pending_frames(sk, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
}
struct sk_buff *ip_make_skb(struct sock *sk,
+ struct flowi4 *fl4,
int getfrag(void *from, char *to, int offset,
int len, int odd, struct sk_buff *skb),
void *from, int length, int transhdrlen,
struct ipcm_cookie *ipc, struct rtable **rtp,
unsigned int flags)
{
- struct inet_cork cork = {};
+ struct inet_cork cork;
struct sk_buff_head queue;
int err;
@@ -1413,18 +1423,21 @@
__skb_queue_head_init(&queue);
+ cork.flags = 0;
+ cork.addr = 0;
+ cork.opt = NULL;
err = ip_setup_cork(sk, &cork, ipc, rtp);
if (err)
return ERR_PTR(err);
- err = __ip_append_data(sk, &queue, &cork, getfrag,
+ err = __ip_append_data(sk, fl4, &queue, &cork, getfrag,
from, length, transhdrlen, flags);
if (err) {
__ip_flush_pending_frames(sk, &queue, &cork);
return ERR_PTR(err);
}
- return __ip_make_skb(sk, &queue, &cork);
+ return __ip_make_skb(sk, fl4, &queue, &cork);
}
/*
@@ -1447,48 +1460,39 @@
* Should run single threaded per socket because it uses the sock
* structure to pass arguments.
*/
-void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
- unsigned int len)
+void ip_send_reply(struct sock *sk, struct sk_buff *skb, __be32 daddr,
+ struct ip_reply_arg *arg, unsigned int len)
{
struct inet_sock *inet = inet_sk(sk);
- struct {
- struct ip_options opt;
- char data[40];
- } replyopts;
+ struct ip_options_data replyopts;
struct ipcm_cookie ipc;
- __be32 daddr;
+ struct flowi4 fl4;
struct rtable *rt = skb_rtable(skb);
- if (ip_options_echo(&replyopts.opt, skb))
+ if (ip_options_echo(&replyopts.opt.opt, skb))
return;
- daddr = ipc.addr = rt->rt_src;
+ ipc.addr = daddr;
ipc.opt = NULL;
ipc.tx_flags = 0;
- if (replyopts.opt.optlen) {
+ if (replyopts.opt.opt.optlen) {
ipc.opt = &replyopts.opt;
- if (ipc.opt->srr)
- daddr = replyopts.opt.faddr;
+ if (replyopts.opt.opt.srr)
+ daddr = replyopts.opt.opt.faddr;
}
- {
- struct flowi4 fl4 = {
- .flowi4_oif = arg->bound_dev_if,
- .daddr = daddr,
- .saddr = rt->rt_spec_dst,
- .flowi4_tos = RT_TOS(ip_hdr(skb)->tos),
- .fl4_sport = tcp_hdr(skb)->dest,
- .fl4_dport = tcp_hdr(skb)->source,
- .flowi4_proto = sk->sk_protocol,
- .flowi4_flags = ip_reply_arg_flowi_flags(arg),
- };
- security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
- rt = ip_route_output_key(sock_net(sk), &fl4);
- if (IS_ERR(rt))
- return;
- }
+ flowi4_init_output(&fl4, arg->bound_dev_if, 0,
+ RT_TOS(ip_hdr(skb)->tos),
+ RT_SCOPE_UNIVERSE, sk->sk_protocol,
+ ip_reply_arg_flowi_flags(arg),
+ daddr, rt->rt_spec_dst,
+ tcp_hdr(skb)->source, tcp_hdr(skb)->dest);
+ security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
+ rt = ip_route_output_key(sock_net(sk), &fl4);
+ if (IS_ERR(rt))
+ return;
/* And let IP do all the hard work.
@@ -1501,7 +1505,7 @@
sk->sk_priority = skb->priority;
sk->sk_protocol = ip_hdr(skb)->protocol;
sk->sk_bound_dev_if = arg->bound_dev_if;
- ip_append_data(sk, ip_reply_glue_bits, arg->iov->iov_base, len, 0,
+ ip_append_data(sk, &fl4, ip_reply_glue_bits, arg->iov->iov_base, len, 0,
&ipc, &rt, MSG_DONTWAIT);
if ((skb = skb_peek(&sk->sk_write_queue)) != NULL) {
if (arg->csumoffset >= 0)
@@ -1509,7 +1513,7 @@
arg->csumoffset) = csum_fold(csum_add(skb->csum,
arg->csum));
skb->ip_summed = CHECKSUM_NONE;
- ip_push_pending_frames(sk);
+ ip_push_pending_frames(sk, &fl4);
}
bh_unlock_sock(sk);
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 3948c86..ab0c9ef 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -131,7 +131,7 @@
static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb)
{
struct sockaddr_in sin;
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
__be16 *ports = (__be16 *)skb_transport_header(skb);
if (skb_transport_offset(skb) + 4 > skb->len)
@@ -451,6 +451,11 @@
}
+static void opt_kfree_rcu(struct rcu_head *head)
+{
+ kfree(container_of(head, struct ip_options_rcu, rcu));
+}
+
/*
* Socket option code for IP. This is the end of the line after any
* TCP,UDP etc options on an IP socket.
@@ -497,13 +502,16 @@
switch (optname) {
case IP_OPTIONS:
{
- struct ip_options *opt = NULL;
+ struct ip_options_rcu *old, *opt = NULL;
+
if (optlen > 40)
goto e_inval;
err = ip_options_get_from_user(sock_net(sk), &opt,
optval, optlen);
if (err)
break;
+ old = rcu_dereference_protected(inet->inet_opt,
+ sock_owned_by_user(sk));
if (inet->is_icsk) {
struct inet_connection_sock *icsk = inet_csk(sk);
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -512,17 +520,18 @@
(TCPF_LISTEN | TCPF_CLOSE)) &&
inet->inet_daddr != LOOPBACK4_IPV6)) {
#endif
- if (inet->opt)
- icsk->icsk_ext_hdr_len -= inet->opt->optlen;
+ if (old)
+ icsk->icsk_ext_hdr_len -= old->opt.optlen;
if (opt)
- icsk->icsk_ext_hdr_len += opt->optlen;
+ icsk->icsk_ext_hdr_len += opt->opt.optlen;
icsk->icsk_sync_mss(sk, icsk->icsk_pmtu_cookie);
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
}
#endif
}
- opt = xchg(&inet->opt, opt);
- kfree(opt);
+ rcu_assign_pointer(inet->inet_opt, opt);
+ if (old)
+ call_rcu(&old->rcu, opt_kfree_rcu);
break;
}
case IP_PKTINFO:
@@ -1081,12 +1090,16 @@
case IP_OPTIONS:
{
unsigned char optbuf[sizeof(struct ip_options)+40];
- struct ip_options * opt = (struct ip_options *)optbuf;
+ struct ip_options *opt = (struct ip_options *)optbuf;
+ struct ip_options_rcu *inet_opt;
+
+ inet_opt = rcu_dereference_protected(inet->inet_opt,
+ sock_owned_by_user(sk));
opt->optlen = 0;
- if (inet->opt)
- memcpy(optbuf, inet->opt,
- sizeof(struct ip_options)+
- inet->opt->optlen);
+ if (inet_opt)
+ memcpy(optbuf, &inet_opt->opt,
+ sizeof(struct ip_options) +
+ inet_opt->opt.optlen);
release_sock(sk);
if (opt->optlen == 0)
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index 6290675..c857f6f 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -27,7 +27,7 @@
{
struct net *net = dev_net(skb->dev);
__be32 spi;
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
struct ip_comp_hdr *ipch = (struct ip_comp_hdr *)(skb->data+(iph->ihl<<2));
struct xfrm_state *x;
@@ -36,7 +36,7 @@
return;
spi = htonl(ntohs(ipch->cpi));
- x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr,
+ x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
spi, IPPROTO_COMP, AF_INET);
if (!x)
return;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index cbff2ec..ab7e554 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -87,8 +87,8 @@
#endif
/* Define the friendly delay before and after opening net devices */
-#define CONF_PRE_OPEN 500 /* Before opening: 1/2 second */
-#define CONF_POST_OPEN 1 /* After opening: 1 second */
+#define CONF_POST_OPEN 10 /* After opening: 10 msecs */
+#define CONF_CARRIER_TIMEOUT 120000 /* Wait for carrier timeout */
/* Define the timeout for waiting for a DHCP/BOOTP/RARP reply */
#define CONF_OPEN_RETRIES 2 /* (Re)open devices twice */
@@ -188,14 +188,14 @@
static struct ic_device *ic_first_dev __initdata = NULL;/* List of open device */
static struct net_device *ic_dev __initdata = NULL; /* Selected device */
-static bool __init ic_device_match(struct net_device *dev)
+static bool __init ic_is_init_dev(struct net_device *dev)
{
- if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
+ if (dev->flags & IFF_LOOPBACK)
+ return false;
+ return user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
(!(dev->flags & IFF_LOOPBACK) &&
(dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
- strncmp(dev->name, "dummy", 5)))
- return true;
- return false;
+ strncmp(dev->name, "dummy", 5));
}
static int __init ic_open_devs(void)
@@ -203,6 +203,7 @@
struct ic_device *d, **last;
struct net_device *dev;
unsigned short oflags;
+ unsigned long start;
last = &ic_first_dev;
rtnl_lock();
@@ -216,9 +217,7 @@
}
for_each_netdev(&init_net, dev) {
- if (dev->flags & IFF_LOOPBACK)
- continue;
- if (ic_device_match(dev)) {
+ if (ic_is_init_dev(dev)) {
int able = 0;
if (dev->mtu >= 364)
able |= IC_BOOTP;
@@ -252,6 +251,17 @@
dev->name, able, d->xid));
}
}
+
+ /* wait for a carrier on at least one device */
+ start = jiffies;
+ while (jiffies - start < msecs_to_jiffies(CONF_CARRIER_TIMEOUT)) {
+ for_each_netdev(&init_net, dev)
+ if (ic_is_init_dev(dev) && netif_carrier_ok(dev))
+ goto have_carrier;
+
+ msleep(1);
+ }
+have_carrier:
rtnl_unlock();
*last = NULL;
@@ -1324,14 +1334,13 @@
{
int i;
- msleep(CONF_PRE_OPEN);
for (i = 0; i < DEVICE_WAIT_MAX; i++) {
struct net_device *dev;
int found = 0;
rtnl_lock();
for_each_netdev(&init_net, dev) {
- if (ic_device_match(dev)) {
+ if (ic_is_init_dev(dev)) {
found = 1;
break;
}
@@ -1378,7 +1387,7 @@
return err;
/* Give drivers a chance to settle */
- ssleep(CONF_POST_OPEN);
+ msleep(CONF_POST_OPEN);
/*
* If the config information is insufficient (e.g., our IP address or
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index bfc17c5..378b20b 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -276,11 +276,6 @@
dev_net_set(dev, net);
- if (strchr(name, '%')) {
- if (dev_alloc_name(dev, name) < 0)
- goto failed_free;
- }
-
nt = netdev_priv(dev);
nt->parms = *parms;
@@ -319,7 +314,7 @@
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct ip_tunnel *t;
@@ -433,15 +428,16 @@
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct pcpu_tstats *tstats;
- struct iphdr *tiph = &tunnel->parms.iph;
+ const struct iphdr *tiph = &tunnel->parms.iph;
u8 tos = tunnel->parms.iph.tos;
__be16 df = tiph->frag_off;
struct rtable *rt; /* Route to the other host */
struct net_device *tdev; /* Device to other host */
- struct iphdr *old_iph = ip_hdr(skb);
+ const struct iphdr *old_iph = ip_hdr(skb);
struct iphdr *iph; /* Our new IP header */
unsigned int max_headroom; /* The extra header space needed */
__be32 dst = tiph->daddr;
+ struct flowi4 fl4;
int mtu;
if (skb->protocol != htons(ETH_P_IP))
@@ -460,7 +456,7 @@
goto tx_error_icmp;
}
- rt = ip_route_output_ports(dev_net(dev), NULL,
+ rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
dst, tiph->saddr,
0, 0,
IPPROTO_IPIP, RT_TOS(tos),
@@ -549,8 +545,8 @@
iph->frag_off = df;
iph->protocol = IPPROTO_IPIP;
iph->tos = INET_ECN_encapsulate(tos, old_iph->tos);
- iph->daddr = rt->rt_dst;
- iph->saddr = rt->rt_src;
+ iph->daddr = fl4.daddr;
+ iph->saddr = fl4.saddr;
if ((iph->ttl = tiph->ttl) == 0)
iph->ttl = old_iph->ttl;
@@ -572,19 +568,21 @@
{
struct net_device *tdev = NULL;
struct ip_tunnel *tunnel;
- struct iphdr *iph;
+ const struct iphdr *iph;
tunnel = netdev_priv(dev);
iph = &tunnel->parms.iph;
if (iph->daddr) {
- struct rtable *rt = ip_route_output_ports(dev_net(dev), NULL,
- iph->daddr, iph->saddr,
- 0, 0,
- IPPROTO_IPIP,
- RT_TOS(iph->tos),
- tunnel->parms.link);
+ struct rtable *rt;
+ struct flowi4 fl4;
+ rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
+ iph->daddr, iph->saddr,
+ 0, 0,
+ IPPROTO_IPIP,
+ RT_TOS(iph->tos),
+ tunnel->parms.link);
if (!IS_ERR(rt)) {
tdev = rt->dst.dev;
ip_rt_put(rt);
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 1f62eae..30a7763 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1549,7 +1549,7 @@
static void ip_encap(struct sk_buff *skb, __be32 saddr, __be32 daddr)
{
struct iphdr *iph;
- struct iphdr *old_iph = ip_hdr(skb);
+ const struct iphdr *old_iph = ip_hdr(skb);
skb_push(skb, sizeof(struct iphdr));
skb->transport_header = skb->network_header;
@@ -1595,6 +1595,7 @@
struct vif_device *vif = &mrt->vif_table[vifi];
struct net_device *dev;
struct rtable *rt;
+ struct flowi4 fl4;
int encap = 0;
if (vif->dev == NULL)
@@ -1612,7 +1613,7 @@
#endif
if (vif->flags & VIFF_TUNNEL) {
- rt = ip_route_output_ports(net, NULL,
+ rt = ip_route_output_ports(net, &fl4, NULL,
vif->remote, vif->local,
0, 0,
IPPROTO_IPIP,
@@ -1621,7 +1622,7 @@
goto out_free;
encap = sizeof(struct iphdr);
} else {
- rt = ip_route_output_ports(net, NULL, iph->daddr, 0,
+ rt = ip_route_output_ports(net, &fl4, NULL, iph->daddr, 0,
0, 0,
IPPROTO_IPIP,
RT_TOS(iph->tos), vif->link);
@@ -1788,12 +1789,14 @@
return 0;
}
-static struct mr_table *ipmr_rt_fib_lookup(struct net *net, struct rtable *rt)
+static struct mr_table *ipmr_rt_fib_lookup(struct net *net, struct sk_buff *skb)
{
+ struct rtable *rt = skb_rtable(skb);
+ struct iphdr *iph = ip_hdr(skb);
struct flowi4 fl4 = {
- .daddr = rt->rt_key_dst,
- .saddr = rt->rt_key_src,
- .flowi4_tos = rt->rt_tos,
+ .daddr = iph->daddr,
+ .saddr = iph->saddr,
+ .flowi4_tos = iph->tos,
.flowi4_oif = rt->rt_oif,
.flowi4_iif = rt->rt_iif,
.flowi4_mark = rt->rt_mark,
@@ -1825,7 +1828,7 @@
if (IPCB(skb)->flags & IPSKB_FORWARDED)
goto dont_forward;
- mrt = ipmr_rt_fib_lookup(net, skb_rtable(skb));
+ mrt = ipmr_rt_fib_lookup(net, skb);
if (IS_ERR(mrt)) {
kfree_skb(skb);
return PTR_ERR(mrt);
@@ -1957,7 +1960,7 @@
pim = igmp_hdr(skb);
- mrt = ipmr_rt_fib_lookup(net, skb_rtable(skb));
+ mrt = ipmr_rt_fib_lookup(net, skb);
if (IS_ERR(mrt))
goto drop;
if (!mrt->mroute_do_pim ||
@@ -1989,7 +1992,7 @@
csum_fold(skb_checksum(skb, 0, skb->len, 0))))
goto drop;
- mrt = ipmr_rt_fib_lookup(net, skb_rtable(skb));
+ mrt = ipmr_rt_fib_lookup(net, skb);
if (IS_ERR(mrt))
goto drop;
if (__pim_rcv(mrt, skb, sizeof(*pim))) {
@@ -2038,20 +2041,20 @@
return -EMSGSIZE;
}
-int ipmr_get_route(struct net *net,
- struct sk_buff *skb, struct rtmsg *rtm, int nowait)
+int ipmr_get_route(struct net *net, struct sk_buff *skb,
+ __be32 saddr, __be32 daddr,
+ struct rtmsg *rtm, int nowait)
{
- int err;
- struct mr_table *mrt;
struct mfc_cache *cache;
- struct rtable *rt = skb_rtable(skb);
+ struct mr_table *mrt;
+ int err;
mrt = ipmr_get_table(net, RT_TABLE_DEFAULT);
if (mrt == NULL)
return -ENOENT;
rcu_read_lock();
- cache = ipmr_cache_find(mrt, rt->rt_src, rt->rt_dst);
+ cache = ipmr_cache_find(mrt, saddr, daddr);
if (cache == NULL) {
struct sk_buff *skb2;
@@ -2084,8 +2087,8 @@
skb_reset_network_header(skb2);
iph = ip_hdr(skb2);
iph->ihl = sizeof(struct iphdr) >> 2;
- iph->saddr = rt->rt_src;
- iph->daddr = rt->rt_dst;
+ iph->saddr = saddr;
+ iph->daddr = daddr;
iph->version = 0;
err = ipmr_cache_unresolved(mrt, vif, skb2);
read_unlock(&mrt_lock);
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 89bc7e6..fd7a3f6 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -260,6 +260,7 @@
void *table_base;
const struct xt_table_info *private;
struct xt_action_param acpar;
+ unsigned int addend;
if (!pskb_may_pull(skb, arp_hdr_len(skb->dev)))
return NF_DROP;
@@ -267,7 +268,8 @@
indev = in ? in->name : nulldevname;
outdev = out ? out->name : nulldevname;
- xt_info_rdlock_bh();
+ local_bh_disable();
+ addend = xt_write_recseq_begin();
private = table->private;
table_base = private->entries[smp_processor_id()];
@@ -338,7 +340,8 @@
/* Verdict */
break;
} while (!acpar.hotdrop);
- xt_info_rdunlock_bh();
+ xt_write_recseq_end(addend);
+ local_bh_enable();
if (acpar.hotdrop)
return NF_DROP;
@@ -712,7 +715,7 @@
unsigned int i;
for_each_possible_cpu(cpu) {
- seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+ seqcount_t *s = &per_cpu(xt_recseq, cpu);
i = 0;
xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -720,10 +723,10 @@
unsigned int start;
do {
- start = read_seqbegin(lock);
+ start = read_seqcount_begin(s);
bcnt = iter->counters.bcnt;
pcnt = iter->counters.pcnt;
- } while (read_seqretry(lock, start));
+ } while (read_seqcount_retry(s, start));
ADD_COUNTER(counters[i], bcnt, pcnt);
++i;
@@ -1115,6 +1118,7 @@
int ret = 0;
void *loc_cpu_entry;
struct arpt_entry *iter;
+ unsigned int addend;
#ifdef CONFIG_COMPAT
struct compat_xt_counters_info compat_tmp;
@@ -1171,12 +1175,12 @@
/* Choose the copy that is on our node */
curcpu = smp_processor_id();
loc_cpu_entry = private->entries[curcpu];
- xt_info_wrlock(curcpu);
+ addend = xt_write_recseq_begin();
xt_entry_foreach(iter, loc_cpu_entry, private->size) {
ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
++i;
}
- xt_info_wrunlock(curcpu);
+ xt_write_recseq_end(addend);
unlock_up_free:
local_bh_enable();
xt_table_unlock(t);
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 7049150..7647438 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -68,15 +68,6 @@
}
EXPORT_SYMBOL_GPL(ipt_alloc_initial_table);
-/*
- We keep a set of rules for each CPU, so we can avoid write-locking
- them in the softirq when updating the counters and therefore
- only need to read-lock in the softirq; doing a write_lock_bh() in user
- context stops packets coming through and allows user context to read
- the counters or update the rules.
-
- Hence the start of any table is given by get_table() below. */
-
/* Returns whether matches rule or not. */
/* Performance critical - called for every packet */
static inline bool
@@ -311,6 +302,7 @@
unsigned int *stackptr, origptr, cpu;
const struct xt_table_info *private;
struct xt_action_param acpar;
+ unsigned int addend;
/* Initialization */
ip = ip_hdr(skb);
@@ -331,7 +323,8 @@
acpar.hooknum = hook;
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
- xt_info_rdlock_bh();
+ local_bh_disable();
+ addend = xt_write_recseq_begin();
private = table->private;
cpu = smp_processor_id();
table_base = private->entries[cpu];
@@ -430,7 +423,9 @@
pr_debug("Exiting %s; resetting sp from %u to %u\n",
__func__, *stackptr, origptr);
*stackptr = origptr;
- xt_info_rdunlock_bh();
+ xt_write_recseq_end(addend);
+ local_bh_enable();
+
#ifdef DEBUG_ALLOW_ALL
return NF_ACCEPT;
#else
@@ -886,7 +881,7 @@
unsigned int i;
for_each_possible_cpu(cpu) {
- seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+ seqcount_t *s = &per_cpu(xt_recseq, cpu);
i = 0;
xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -894,10 +889,10 @@
unsigned int start;
do {
- start = read_seqbegin(lock);
+ start = read_seqcount_begin(s);
bcnt = iter->counters.bcnt;
pcnt = iter->counters.pcnt;
- } while (read_seqretry(lock, start));
+ } while (read_seqcount_retry(s, start));
ADD_COUNTER(counters[i], bcnt, pcnt);
++i; /* macro does multi eval of i */
@@ -1312,6 +1307,7 @@
int ret = 0;
void *loc_cpu_entry;
struct ipt_entry *iter;
+ unsigned int addend;
#ifdef CONFIG_COMPAT
struct compat_xt_counters_info compat_tmp;
@@ -1368,12 +1364,12 @@
/* Choose the copy that is on our node */
curcpu = smp_processor_id();
loc_cpu_entry = private->entries[curcpu];
- xt_info_wrlock(curcpu);
+ addend = xt_write_recseq_begin();
xt_entry_foreach(iter, loc_cpu_entry, private->size) {
ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
++i;
}
- xt_info_wrunlock(curcpu);
+ xt_write_recseq_end(addend);
unlock_up_free:
local_bh_enable();
xt_table_unlock(t);
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 31427fb..99cfa28 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -153,7 +153,7 @@
}
EXPORT_SYMBOL_GPL(nf_nat_set_seq_adjust);
-static void nf_nat_csum(struct sk_buff *skb, struct iphdr *iph, void *data,
+static void nf_nat_csum(struct sk_buff *skb, const struct iphdr *iph, void *data,
int datalen, __sum16 *check, int oldlen)
{
struct rtable *rt = skb_rtable(skb);
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
new file mode 100644
index 0000000..1f3bb11
--- /dev/null
+++ b/net/ipv4/ping.c
@@ -0,0 +1,935 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * "Ping" sockets
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on ipv4/udp.c code.
+ *
+ * Authors: Vasiliy Kulikov / Openwall (for Linux 2.6),
+ * Pavel Kankovsky (for Linux 2.4.32)
+ *
+ * Pavel gave all rights to bugs to Vasiliy,
+ * none of the bugs are Pavel's now.
+ *
+ */
+
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/in.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <net/snmp.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <net/icmp.h>
+#include <net/protocol.h>
+#include <linux/skbuff.h>
+#include <linux/proc_fs.h>
+#include <net/sock.h>
+#include <net/ping.h>
+#include <net/icmp.h>
+#include <net/udp.h>
+#include <net/route.h>
+#include <net/inet_common.h>
+#include <net/checksum.h>
+
+
+static struct ping_table ping_table;
+
+static u16 ping_port_rover;
+
+static inline int ping_hashfn(struct net *net, unsigned num, unsigned mask)
+{
+ int res = (num + net_hash_mix(net)) & mask;
+ pr_debug("hash(%d) = %d\n", num, res);
+ return res;
+}
+
+static inline struct hlist_nulls_head *ping_hashslot(struct ping_table *table,
+ struct net *net, unsigned num)
+{
+ return &table->hash[ping_hashfn(net, num, PING_HTABLE_MASK)];
+}
+
+static int ping_v4_get_port(struct sock *sk, unsigned short ident)
+{
+ struct hlist_nulls_node *node;
+ struct hlist_nulls_head *hlist;
+ struct inet_sock *isk, *isk2;
+ struct sock *sk2 = NULL;
+
+ isk = inet_sk(sk);
+ write_lock_bh(&ping_table.lock);
+ if (ident == 0) {
+ u32 i;
+ u16 result = ping_port_rover + 1;
+
+ for (i = 0; i < (1L << 16); i++, result++) {
+ if (!result)
+ result++; /* avoid zero */
+ hlist = ping_hashslot(&ping_table, sock_net(sk),
+ result);
+ ping_portaddr_for_each_entry(sk2, node, hlist) {
+ isk2 = inet_sk(sk2);
+
+ if (isk2->inet_num == result)
+ goto next_port;
+ }
+
+ /* found */
+ ping_port_rover = ident = result;
+ break;
+next_port:
+ ;
+ }
+ if (i >= (1L << 16))
+ goto fail;
+ } else {
+ hlist = ping_hashslot(&ping_table, sock_net(sk), ident);
+ ping_portaddr_for_each_entry(sk2, node, hlist) {
+ isk2 = inet_sk(sk2);
+
+ if ((isk2->inet_num == ident) &&
+ (sk2 != sk) &&
+ (!sk2->sk_reuse || !sk->sk_reuse))
+ goto fail;
+ }
+ }
+
+ pr_debug("found port/ident = %d\n", ident);
+ isk->inet_num = ident;
+ if (sk_unhashed(sk)) {
+ pr_debug("was not hashed\n");
+ sock_hold(sk);
+ hlist_nulls_add_head(&sk->sk_nulls_node, hlist);
+ sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+ }
+ write_unlock_bh(&ping_table.lock);
+ return 0;
+
+fail:
+ write_unlock_bh(&ping_table.lock);
+ return 1;
+}
+
+static void ping_v4_hash(struct sock *sk)
+{
+ pr_debug("ping_v4_hash(sk->port=%u)\n", inet_sk(sk)->inet_num);
+ BUG(); /* "Please do not press this button again." */
+}
+
+static void ping_v4_unhash(struct sock *sk)
+{
+ struct inet_sock *isk = inet_sk(sk);
+ pr_debug("ping_v4_unhash(isk=%p,isk->num=%u)\n", isk, isk->inet_num);
+ if (sk_hashed(sk)) {
+ struct hlist_nulls_head *hslot;
+
+ hslot = ping_hashslot(&ping_table, sock_net(sk), isk->inet_num);
+ write_lock_bh(&ping_table.lock);
+ hlist_nulls_del(&sk->sk_nulls_node);
+ sock_put(sk);
+ isk->inet_num = isk->inet_sport = 0;
+ sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+ write_unlock_bh(&ping_table.lock);
+ }
+}
+
+static struct sock *ping_v4_lookup(struct net *net, u32 saddr, u32 daddr,
+ u16 ident, int dif)
+{
+ struct hlist_nulls_head *hslot = ping_hashslot(&ping_table, net, ident);
+ struct sock *sk = NULL;
+ struct inet_sock *isk;
+ struct hlist_nulls_node *hnode;
+
+ pr_debug("try to find: num = %d, daddr = %ld, dif = %d\n",
+ (int)ident, (unsigned long)daddr, dif);
+ read_lock_bh(&ping_table.lock);
+
+ ping_portaddr_for_each_entry(sk, hnode, hslot) {
+ isk = inet_sk(sk);
+
+ pr_debug("found: %p: num = %d, daddr = %ld, dif = %d\n", sk,
+ (int)isk->inet_num, (unsigned long)isk->inet_rcv_saddr,
+ sk->sk_bound_dev_if);
+
+ pr_debug("iterate\n");
+ if (isk->inet_num != ident)
+ continue;
+ if (isk->inet_rcv_saddr && isk->inet_rcv_saddr != daddr)
+ continue;
+ if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)
+ continue;
+
+ sock_hold(sk);
+ goto exit;
+ }
+
+ sk = NULL;
+exit:
+ read_unlock_bh(&ping_table.lock);
+
+ return sk;
+}
+
+static void inet_get_ping_group_range_net(struct net *net, gid_t *low,
+ gid_t *high)
+{
+ gid_t *data = net->ipv4.sysctl_ping_group_range;
+ unsigned seq;
+ do {
+ seq = read_seqbegin(&sysctl_local_ports.lock);
+
+ *low = data[0];
+ *high = data[1];
+ } while (read_seqretry(&sysctl_local_ports.lock, seq));
+}
+
+
+static int ping_init_sock(struct sock *sk)
+{
+ struct net *net = sock_net(sk);
+ gid_t group = current_egid();
+ gid_t range[2];
+ struct group_info *group_info = get_current_groups();
+ int i, j, count = group_info->ngroups;
+
+ inet_get_ping_group_range_net(net, range, range+1);
+ if (range[0] <= group && group <= range[1])
+ return 0;
+
+ for (i = 0; i < group_info->nblocks; i++) {
+ int cp_count = min_t(int, NGROUPS_PER_BLOCK, count);
+
+ for (j = 0; j < cp_count; j++) {
+ group = group_info->blocks[i][j];
+ if (range[0] <= group && group <= range[1])
+ return 0;
+ }
+
+ count -= cp_count;
+ }
+
+ return -EACCES;
+}
+
+static void ping_close(struct sock *sk, long timeout)
+{
+ pr_debug("ping_close(sk=%p,sk->num=%u)\n",
+ inet_sk(sk), inet_sk(sk)->inet_num);
+ pr_debug("isk->refcnt = %d\n", sk->sk_refcnt.counter);
+
+ sk_common_release(sk);
+}
+
+/*
+ * We need our own bind because there are no privileged id's == local ports.
+ * Moreover, we don't allow binding to multi- and broadcast addresses.
+ */
+
+static int ping_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
+{
+ struct sockaddr_in *addr = (struct sockaddr_in *)uaddr;
+ struct inet_sock *isk = inet_sk(sk);
+ unsigned short snum;
+ int chk_addr_ret;
+ int err;
+
+ if (addr_len < sizeof(struct sockaddr_in))
+ return -EINVAL;
+
+ pr_debug("ping_v4_bind(sk=%p,sa_addr=%08x,sa_port=%d)\n",
+ sk, addr->sin_addr.s_addr, ntohs(addr->sin_port));
+
+ chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
+ if (addr->sin_addr.s_addr == INADDR_ANY)
+ chk_addr_ret = RTN_LOCAL;
+
+ if ((sysctl_ip_nonlocal_bind == 0 &&
+ isk->freebind == 0 && isk->transparent == 0 &&
+ chk_addr_ret != RTN_LOCAL) ||
+ chk_addr_ret == RTN_MULTICAST ||
+ chk_addr_ret == RTN_BROADCAST)
+ return -EADDRNOTAVAIL;
+
+ lock_sock(sk);
+
+ err = -EINVAL;
+ if (isk->inet_num != 0)
+ goto out;
+
+ err = -EADDRINUSE;
+ isk->inet_rcv_saddr = isk->inet_saddr = addr->sin_addr.s_addr;
+ snum = ntohs(addr->sin_port);
+ if (ping_v4_get_port(sk, snum) != 0) {
+ isk->inet_saddr = isk->inet_rcv_saddr = 0;
+ goto out;
+ }
+
+ pr_debug("after bind(): num = %d, daddr = %ld, dif = %d\n",
+ (int)isk->inet_num,
+ (unsigned long) isk->inet_rcv_saddr,
+ (int)sk->sk_bound_dev_if);
+
+ err = 0;
+ if (isk->inet_rcv_saddr)
+ sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
+ if (snum)
+ sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
+ isk->inet_sport = htons(isk->inet_num);
+ isk->inet_daddr = 0;
+ isk->inet_dport = 0;
+ sk_dst_reset(sk);
+out:
+ release_sock(sk);
+ pr_debug("ping_v4_bind -> %d\n", err);
+ return err;
+}
+
+/*
+ * Is this a supported type of ICMP message?
+ */
+
+static inline int ping_supported(int type, int code)
+{
+ if (type == ICMP_ECHO && code == 0)
+ return 1;
+ return 0;
+}
+
+/*
+ * This routine is called by the ICMP module when it gets some
+ * sort of error condition.
+ */
+
+static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
+
+void ping_err(struct sk_buff *skb, u32 info)
+{
+ struct iphdr *iph = (struct iphdr *)skb->data;
+ struct icmphdr *icmph = (struct icmphdr *)(skb->data+(iph->ihl<<2));
+ struct inet_sock *inet_sock;
+ int type = icmph->type;
+ int code = icmph->code;
+ struct net *net = dev_net(skb->dev);
+ struct sock *sk;
+ int harderr;
+ int err;
+
+ /* We assume the packet has already been checked by icmp_unreach */
+
+ if (!ping_supported(icmph->type, icmph->code))
+ return;
+
+ pr_debug("ping_err(type=%04x,code=%04x,id=%04x,seq=%04x)\n", type,
+ code, ntohs(icmph->un.echo.id), ntohs(icmph->un.echo.sequence));
+
+ sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
+ ntohs(icmph->un.echo.id), skb->dev->ifindex);
+ if (sk == NULL) {
+ ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
+ pr_debug("no socket, dropping\n");
+ return; /* No socket for error */
+ }
+ pr_debug("err on socket %p\n", sk);
+
+ err = 0;
+ harderr = 0;
+ inet_sock = inet_sk(sk);
+
+ switch (type) {
+ default:
+ case ICMP_TIME_EXCEEDED:
+ err = EHOSTUNREACH;
+ break;
+ case ICMP_SOURCE_QUENCH:
+ /* This is not a real error but ping wants to see it.
+ * Report it with some fake errno. */
+ err = EREMOTEIO;
+ break;
+ case ICMP_PARAMETERPROB:
+ err = EPROTO;
+ harderr = 1;
+ break;
+ case ICMP_DEST_UNREACH:
+ if (code == ICMP_FRAG_NEEDED) { /* Path MTU discovery */
+ if (inet_sock->pmtudisc != IP_PMTUDISC_DONT) {
+ err = EMSGSIZE;
+ harderr = 1;
+ break;
+ }
+ goto out;
+ }
+ err = EHOSTUNREACH;
+ if (code <= NR_ICMP_UNREACH) {
+ harderr = icmp_err_convert[code].fatal;
+ err = icmp_err_convert[code].errno;
+ }
+ break;
+ case ICMP_REDIRECT:
+ /* See ICMP_SOURCE_QUENCH */
+ err = EREMOTEIO;
+ break;
+ }
+
+ /*
+ * RFC1122: OK. Passes ICMP errors back to application, as per
+ * 4.1.3.3.
+ */
+ if (!inet_sock->recverr) {
+ if (!harderr || sk->sk_state != TCP_ESTABLISHED)
+ goto out;
+ } else {
+ ip_icmp_error(sk, skb, err, 0 /* no remote port */,
+ info, (u8 *)icmph);
+ }
+ sk->sk_err = err;
+ sk->sk_error_report(sk);
+out:
+ sock_put(sk);
+}
+
+/*
+ * Copy and checksum an ICMP Echo packet from user space into a buffer.
+ */
+
+struct pingfakehdr {
+ struct icmphdr icmph;
+ struct iovec *iov;
+ u32 wcheck;
+};
+
+static int ping_getfrag(void *from, char * to,
+ int offset, int fraglen, int odd, struct sk_buff *skb)
+{
+ struct pingfakehdr *pfh = (struct pingfakehdr *)from;
+
+ if (offset == 0) {
+ if (fraglen < sizeof(struct icmphdr))
+ BUG();
+ if (csum_partial_copy_fromiovecend(to + sizeof(struct icmphdr),
+ pfh->iov, 0, fraglen - sizeof(struct icmphdr),
+ &pfh->wcheck))
+ return -EFAULT;
+
+ return 0;
+ }
+ if (offset < sizeof(struct icmphdr))
+ BUG();
+ if (csum_partial_copy_fromiovecend
+ (to, pfh->iov, offset - sizeof(struct icmphdr),
+ fraglen, &pfh->wcheck))
+ return -EFAULT;
+ return 0;
+}
+
+static int ping_push_pending_frames(struct sock *sk, struct pingfakehdr *pfh,
+ struct flowi4 *fl4)
+{
+ struct sk_buff *skb = skb_peek(&sk->sk_write_queue);
+
+ pfh->wcheck = csum_partial((char *)&pfh->icmph,
+ sizeof(struct icmphdr), pfh->wcheck);
+ pfh->icmph.checksum = csum_fold(pfh->wcheck);
+ memcpy(icmp_hdr(skb), &pfh->icmph, sizeof(struct icmphdr));
+ skb->ip_summed = CHECKSUM_NONE;
+ return ip_push_pending_frames(sk, fl4);
+}
+
+static int ping_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+ size_t len)
+{
+ struct net *net = sock_net(sk);
+ struct flowi4 fl4;
+ struct inet_sock *inet = inet_sk(sk);
+ struct ipcm_cookie ipc;
+ struct icmphdr user_icmph;
+ struct pingfakehdr pfh;
+ struct rtable *rt = NULL;
+ struct ip_options_data opt_copy;
+ int free = 0;
+ u32 saddr, daddr, faddr;
+ u8 tos;
+ int err;
+
+ pr_debug("ping_sendmsg(sk=%p,sk->num=%u)\n", inet, inet->inet_num);
+
+
+ if (len > 0xFFFF)
+ return -EMSGSIZE;
+
+ /*
+ * Check the flags.
+ */
+
+ /* Mirror BSD error message compatibility */
+ if (msg->msg_flags & MSG_OOB)
+ return -EOPNOTSUPP;
+
+ /*
+ * Fetch the ICMP header provided by the userland.
+ * iovec is modified!
+ */
+
+ if (memcpy_fromiovec((u8 *)&user_icmph, msg->msg_iov,
+ sizeof(struct icmphdr)))
+ return -EFAULT;
+ if (!ping_supported(user_icmph.type, user_icmph.code))
+ return -EINVAL;
+
+ /*
+ * Get and verify the address.
+ */
+
+ if (msg->msg_name) {
+ struct sockaddr_in *usin = (struct sockaddr_in *)msg->msg_name;
+ if (msg->msg_namelen < sizeof(*usin))
+ return -EINVAL;
+ if (usin->sin_family != AF_INET)
+ return -EINVAL;
+ daddr = usin->sin_addr.s_addr;
+ /* no remote port */
+ } else {
+ if (sk->sk_state != TCP_ESTABLISHED)
+ return -EDESTADDRREQ;
+ daddr = inet->inet_daddr;
+ /* no remote port */
+ }
+
+ ipc.addr = inet->inet_saddr;
+ ipc.opt = NULL;
+ ipc.oif = sk->sk_bound_dev_if;
+ ipc.tx_flags = 0;
+ err = sock_tx_timestamp(sk, &ipc.tx_flags);
+ if (err)
+ return err;
+
+ if (msg->msg_controllen) {
+ err = ip_cmsg_send(sock_net(sk), msg, &ipc);
+ if (err)
+ return err;
+ if (ipc.opt)
+ free = 1;
+ }
+ if (!ipc.opt) {
+ struct ip_options_rcu *inet_opt;
+
+ rcu_read_lock();
+ inet_opt = rcu_dereference(inet->inet_opt);
+ if (inet_opt) {
+ memcpy(&opt_copy, inet_opt,
+ sizeof(*inet_opt) + inet_opt->opt.optlen);
+ ipc.opt = &opt_copy.opt;
+ }
+ rcu_read_unlock();
+ }
+
+ saddr = ipc.addr;
+ ipc.addr = faddr = daddr;
+
+ if (ipc.opt && ipc.opt->opt.srr) {
+ if (!daddr)
+ return -EINVAL;
+ faddr = ipc.opt->opt.faddr;
+ }
+ tos = RT_TOS(inet->tos);
+ if (sock_flag(sk, SOCK_LOCALROUTE) ||
+ (msg->msg_flags & MSG_DONTROUTE) ||
+ (ipc.opt && ipc.opt->opt.is_strictroute)) {
+ tos |= RTO_ONLINK;
+ }
+
+ if (ipv4_is_multicast(daddr)) {
+ if (!ipc.oif)
+ ipc.oif = inet->mc_index;
+ if (!saddr)
+ saddr = inet->mc_addr;
+ }
+
+ flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
+ RT_SCOPE_UNIVERSE, sk->sk_protocol,
+ inet_sk_flowi_flags(sk), faddr, saddr, 0, 0);
+
+ security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
+ rt = ip_route_output_flow(net, &fl4, sk);
+ if (IS_ERR(rt)) {
+ err = PTR_ERR(rt);
+ rt = NULL;
+ if (err == -ENETUNREACH)
+ IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+ goto out;
+ }
+
+ err = -EACCES;
+ if ((rt->rt_flags & RTCF_BROADCAST) &&
+ !sock_flag(sk, SOCK_BROADCAST))
+ goto out;
+
+ if (msg->msg_flags & MSG_CONFIRM)
+ goto do_confirm;
+back_from_confirm:
+
+ if (!ipc.addr)
+ ipc.addr = fl4.daddr;
+
+ lock_sock(sk);
+
+ pfh.icmph.type = user_icmph.type; /* already checked */
+ pfh.icmph.code = user_icmph.code; /* ditto */
+ pfh.icmph.checksum = 0;
+ pfh.icmph.un.echo.id = inet->inet_sport;
+ pfh.icmph.un.echo.sequence = user_icmph.un.echo.sequence;
+ pfh.iov = msg->msg_iov;
+ pfh.wcheck = 0;
+
+ err = ip_append_data(sk, &fl4, ping_getfrag, &pfh, len,
+ 0, &ipc, &rt, msg->msg_flags);
+ if (err)
+ ip_flush_pending_frames(sk);
+ else
+ err = ping_push_pending_frames(sk, &pfh, &fl4);
+ release_sock(sk);
+
+out:
+ ip_rt_put(rt);
+ if (free)
+ kfree(ipc.opt);
+ if (!err) {
+ icmp_out_count(sock_net(sk), user_icmph.type);
+ return len;
+ }
+ return err;
+
+do_confirm:
+ dst_confirm(&rt->dst);
+ if (!(msg->msg_flags & MSG_PROBE) || len)
+ goto back_from_confirm;
+ err = 0;
+ goto out;
+}
+
+static int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+ size_t len, int noblock, int flags, int *addr_len)
+{
+ struct inet_sock *isk = inet_sk(sk);
+ struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
+ struct sk_buff *skb;
+ int copied, err;
+
+ pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num);
+
+ if (flags & MSG_OOB)
+ goto out;
+
+ if (addr_len)
+ *addr_len = sizeof(*sin);
+
+ if (flags & MSG_ERRQUEUE)
+ return ip_recv_error(sk, msg, len);
+
+ skb = skb_recv_datagram(sk, flags, noblock, &err);
+ if (!skb)
+ goto out;
+
+ copied = skb->len;
+ if (copied > len) {
+ msg->msg_flags |= MSG_TRUNC;
+ copied = len;
+ }
+
+ /* Don't bother checking the checksum */
+ err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ if (err)
+ goto done;
+
+ sock_recv_timestamp(msg, sk, skb);
+
+ /* Copy the address. */
+ if (sin) {
+ sin->sin_family = AF_INET;
+ sin->sin_port = 0 /* skb->h.uh->source */;
+ sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
+ memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+ }
+ if (isk->cmsg_flags)
+ ip_cmsg_recv(msg, skb);
+ err = copied;
+
+done:
+ skb_free_datagram(sk, skb);
+out:
+ pr_debug("ping_recvmsg -> %d\n", err);
+ return err;
+}
+
+static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+ pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
+ inet_sk(sk), inet_sk(sk)->inet_num, skb);
+ if (sock_queue_rcv_skb(sk, skb) < 0) {
+ ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS);
+ kfree_skb(skb);
+ pr_debug("ping_queue_rcv_skb -> failed\n");
+ return -1;
+ }
+ return 0;
+}
+
+
+/*
+ * All we need to do is get the socket.
+ */
+
+void ping_rcv(struct sk_buff *skb)
+{
+ struct sock *sk;
+ struct net *net = dev_net(skb->dev);
+ struct iphdr *iph = ip_hdr(skb);
+ struct icmphdr *icmph = icmp_hdr(skb);
+ u32 saddr = iph->saddr;
+ u32 daddr = iph->daddr;
+
+ /* We assume the packet has already been checked by icmp_rcv */
+
+ pr_debug("ping_rcv(skb=%p,id=%04x,seq=%04x)\n",
+ skb, ntohs(icmph->un.echo.id), ntohs(icmph->un.echo.sequence));
+
+ /* Push ICMP header back */
+ skb_push(skb, skb->data - (u8 *)icmph);
+
+ sk = ping_v4_lookup(net, saddr, daddr, ntohs(icmph->un.echo.id),
+ skb->dev->ifindex);
+ if (sk != NULL) {
+ pr_debug("rcv on socket %p\n", sk);
+ ping_queue_rcv_skb(sk, skb_get(skb));
+ sock_put(sk);
+ return;
+ }
+ pr_debug("no socket, dropping\n");
+
+ /* We're called from icmp_rcv(). kfree_skb() is done there. */
+}
+
+struct proto ping_prot = {
+ .name = "PING",
+ .owner = THIS_MODULE,
+ .init = ping_init_sock,
+ .close = ping_close,
+ .connect = ip4_datagram_connect,
+ .disconnect = udp_disconnect,
+ .setsockopt = ip_setsockopt,
+ .getsockopt = ip_getsockopt,
+ .sendmsg = ping_sendmsg,
+ .recvmsg = ping_recvmsg,
+ .bind = ping_bind,
+ .backlog_rcv = ping_queue_rcv_skb,
+ .hash = ping_v4_hash,
+ .unhash = ping_v4_unhash,
+ .get_port = ping_v4_get_port,
+ .obj_size = sizeof(struct inet_sock),
+};
+EXPORT_SYMBOL(ping_prot);
+
+#ifdef CONFIG_PROC_FS
+
+static struct sock *ping_get_first(struct seq_file *seq, int start)
+{
+ struct sock *sk;
+ struct ping_iter_state *state = seq->private;
+ struct net *net = seq_file_net(seq);
+
+ for (state->bucket = start; state->bucket < PING_HTABLE_SIZE;
+ ++state->bucket) {
+ struct hlist_nulls_node *node;
+ struct hlist_nulls_head *hslot;
+
+ hslot = &ping_table.hash[state->bucket];
+
+ if (hlist_nulls_empty(hslot))
+ continue;
+
+ sk_nulls_for_each(sk, node, hslot) {
+ if (net_eq(sock_net(sk), net))
+ goto found;
+ }
+ }
+ sk = NULL;
+found:
+ return sk;
+}
+
+static struct sock *ping_get_next(struct seq_file *seq, struct sock *sk)
+{
+ struct ping_iter_state *state = seq->private;
+ struct net *net = seq_file_net(seq);
+
+ do {
+ sk = sk_nulls_next(sk);
+ } while (sk && (!net_eq(sock_net(sk), net)));
+
+ if (!sk)
+ return ping_get_first(seq, state->bucket + 1);
+ return sk;
+}
+
+static struct sock *ping_get_idx(struct seq_file *seq, loff_t pos)
+{
+ struct sock *sk = ping_get_first(seq, 0);
+
+ if (sk)
+ while (pos && (sk = ping_get_next(seq, sk)) != NULL)
+ --pos;
+ return pos ? NULL : sk;
+}
+
+static void *ping_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct ping_iter_state *state = seq->private;
+ state->bucket = 0;
+
+ read_lock_bh(&ping_table.lock);
+
+ return *pos ? ping_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
+}
+
+static void *ping_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct sock *sk;
+
+ if (v == SEQ_START_TOKEN)
+ sk = ping_get_idx(seq, 0);
+ else
+ sk = ping_get_next(seq, v);
+
+ ++*pos;
+ return sk;
+}
+
+static void ping_seq_stop(struct seq_file *seq, void *v)
+{
+ read_unlock_bh(&ping_table.lock);
+}
+
+static void ping_format_sock(struct sock *sp, struct seq_file *f,
+ int bucket, int *len)
+{
+ struct inet_sock *inet = inet_sk(sp);
+ __be32 dest = inet->inet_daddr;
+ __be32 src = inet->inet_rcv_saddr;
+ __u16 destp = ntohs(inet->inet_dport);
+ __u16 srcp = ntohs(inet->inet_sport);
+
+ seq_printf(f, "%5d: %08X:%04X %08X:%04X"
+ " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %pK %d%n",
+ bucket, src, srcp, dest, destp, sp->sk_state,
+ sk_wmem_alloc_get(sp),
+ sk_rmem_alloc_get(sp),
+ 0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
+ atomic_read(&sp->sk_refcnt), sp,
+ atomic_read(&sp->sk_drops), len);
+}
+
+static int ping_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_printf(seq, "%-127s\n",
+ " sl local_address rem_address st tx_queue "
+ "rx_queue tr tm->when retrnsmt uid timeout "
+ "inode ref pointer drops");
+ else {
+ struct ping_iter_state *state = seq->private;
+ int len;
+
+ ping_format_sock(v, seq, state->bucket, &len);
+ seq_printf(seq, "%*s\n", 127 - len, "");
+ }
+ return 0;
+}
+
+static const struct seq_operations ping_seq_ops = {
+ .show = ping_seq_show,
+ .start = ping_seq_start,
+ .next = ping_seq_next,
+ .stop = ping_seq_stop,
+};
+
+static int ping_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open_net(inode, file, &ping_seq_ops,
+ sizeof(struct ping_iter_state));
+}
+
+static const struct file_operations ping_seq_fops = {
+ .open = ping_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net,
+};
+
+static int ping_proc_register(struct net *net)
+{
+ struct proc_dir_entry *p;
+ int rc = 0;
+
+ p = proc_net_fops_create(net, "icmp", S_IRUGO, &ping_seq_fops);
+ if (!p)
+ rc = -ENOMEM;
+ return rc;
+}
+
+static void ping_proc_unregister(struct net *net)
+{
+ proc_net_remove(net, "icmp");
+}
+
+
+static int __net_init ping_proc_init_net(struct net *net)
+{
+ return ping_proc_register(net);
+}
+
+static void __net_exit ping_proc_exit_net(struct net *net)
+{
+ ping_proc_unregister(net);
+}
+
+static struct pernet_operations ping_net_ops = {
+ .init = ping_proc_init_net,
+ .exit = ping_proc_exit_net,
+};
+
+int __init ping_proc_init(void)
+{
+ return register_pernet_subsys(&ping_net_ops);
+}
+
+void ping_proc_exit(void)
+{
+ unregister_pernet_subsys(&ping_net_ops);
+}
+
+#endif
+
+void __init ping_init(void)
+{
+ int i;
+
+ for (i = 0; i < PING_HTABLE_SIZE; i++)
+ INIT_HLIST_NULLS_HEAD(&ping_table.hash[i], i);
+ rwlock_init(&ping_table.lock);
+}
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index bceaec4..11e17804 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -154,7 +154,7 @@
* RFC 1122: SHOULD pass TOS value up to the transport layer.
* -> It does. And not only TOS, but all IP header.
*/
-static int raw_v4_input(struct sk_buff *skb, struct iphdr *iph, int hash)
+static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash)
{
struct sock *sk;
struct hlist_head *head;
@@ -247,7 +247,7 @@
}
if (inet->recverr) {
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
u8 *payload = skb->data + (iph->ihl << 2);
if (inet->hdrincl)
@@ -265,7 +265,7 @@
{
int hash;
struct sock *raw_sk;
- struct iphdr *iph;
+ const struct iphdr *iph;
struct net *net;
hash = protocol & (RAW_HTABLE_SIZE - 1);
@@ -273,7 +273,7 @@
read_lock(&raw_v4_hashinfo.lock);
raw_sk = sk_head(&raw_v4_hashinfo.ht[hash]);
if (raw_sk != NULL) {
- iph = (struct iphdr *)skb->data;
+ iph = (const struct iphdr *)skb->data;
net = dev_net(skb->dev);
while ((raw_sk = __raw_v4_lookup(net, raw_sk, protocol,
@@ -281,7 +281,7 @@
skb->dev->ifindex)) != NULL) {
raw_err(raw_sk, skb, info);
raw_sk = sk_next(raw_sk);
- iph = (struct iphdr *)skb->data;
+ iph = (const struct iphdr *)skb->data;
}
}
read_unlock(&raw_v4_hashinfo.lock);
@@ -314,9 +314,10 @@
return 0;
}
-static int raw_send_hdrinc(struct sock *sk, void *from, size_t length,
- struct rtable **rtp,
- unsigned int flags)
+static int raw_send_hdrinc(struct sock *sk, struct flowi4 *fl4,
+ void *from, size_t length,
+ struct rtable **rtp,
+ unsigned int flags)
{
struct inet_sock *inet = inet_sk(sk);
struct net *net = sock_net(sk);
@@ -327,7 +328,7 @@
struct rtable *rt = *rtp;
if (length > rt->dst.dev->mtu) {
- ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
+ ip_local_error(sk, EMSGSIZE, fl4->daddr, inet->inet_dport,
rt->dst.dev->mtu);
return -EMSGSIZE;
}
@@ -372,7 +373,7 @@
if (iphlen >= sizeof(*iph)) {
if (!iph->saddr)
- iph->saddr = rt->rt_src;
+ iph->saddr = fl4->saddr;
iph->check = 0;
iph->tot_len = htons(length);
if (!iph->id)
@@ -455,11 +456,13 @@
struct inet_sock *inet = inet_sk(sk);
struct ipcm_cookie ipc;
struct rtable *rt = NULL;
+ struct flowi4 fl4;
int free = 0;
__be32 daddr;
__be32 saddr;
u8 tos;
int err;
+ struct ip_options_data opt_copy;
err = -EMSGSIZE;
if (len > 0xFFFF)
@@ -520,8 +523,18 @@
saddr = ipc.addr;
ipc.addr = daddr;
- if (!ipc.opt)
- ipc.opt = inet->opt;
+ if (!ipc.opt) {
+ struct ip_options_rcu *inet_opt;
+
+ rcu_read_lock();
+ inet_opt = rcu_dereference(inet->inet_opt);
+ if (inet_opt) {
+ memcpy(&opt_copy, inet_opt,
+ sizeof(*inet_opt) + inet_opt->opt.optlen);
+ ipc.opt = &opt_copy.opt;
+ }
+ rcu_read_unlock();
+ }
if (ipc.opt) {
err = -EINVAL;
@@ -530,10 +543,10 @@
*/
if (inet->hdrincl)
goto done;
- if (ipc.opt->srr) {
+ if (ipc.opt->opt.srr) {
if (!daddr)
goto done;
- daddr = ipc.opt->faddr;
+ daddr = ipc.opt->opt.faddr;
}
}
tos = RT_CONN_FLAGS(sk);
@@ -547,31 +560,23 @@
saddr = inet->mc_addr;
}
- {
- struct flowi4 fl4 = {
- .flowi4_oif = ipc.oif,
- .flowi4_mark = sk->sk_mark,
- .daddr = daddr,
- .saddr = saddr,
- .flowi4_tos = tos,
- .flowi4_proto = (inet->hdrincl ?
- IPPROTO_RAW :
- sk->sk_protocol),
- .flowi4_flags = FLOWI_FLAG_CAN_SLEEP,
- };
- if (!inet->hdrincl) {
- err = raw_probe_proto_opt(&fl4, msg);
- if (err)
- goto done;
- }
+ flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
+ RT_SCOPE_UNIVERSE,
+ inet->hdrincl ? IPPROTO_RAW : sk->sk_protocol,
+ FLOWI_FLAG_CAN_SLEEP, daddr, saddr, 0, 0);
- security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
- rt = ip_route_output_flow(sock_net(sk), &fl4, sk);
- if (IS_ERR(rt)) {
- err = PTR_ERR(rt);
- rt = NULL;
+ if (!inet->hdrincl) {
+ err = raw_probe_proto_opt(&fl4, msg);
+ if (err)
goto done;
- }
+ }
+
+ security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
+ rt = ip_route_output_flow(sock_net(sk), &fl4, sk);
+ if (IS_ERR(rt)) {
+ err = PTR_ERR(rt);
+ rt = NULL;
+ goto done;
}
err = -EACCES;
@@ -583,19 +588,20 @@
back_from_confirm:
if (inet->hdrincl)
- err = raw_send_hdrinc(sk, msg->msg_iov, len,
- &rt, msg->msg_flags);
+ err = raw_send_hdrinc(sk, &fl4, msg->msg_iov, len,
+ &rt, msg->msg_flags);
else {
if (!ipc.addr)
- ipc.addr = rt->rt_dst;
+ ipc.addr = fl4.daddr;
lock_sock(sk);
- err = ip_append_data(sk, ip_generic_getfrag, msg->msg_iov, len, 0,
- &ipc, &rt, msg->msg_flags);
+ err = ip_append_data(sk, &fl4, ip_generic_getfrag,
+ msg->msg_iov, len, 0,
+ &ipc, &rt, msg->msg_flags);
if (err)
ip_flush_pending_frames(sk);
else if (!(msg->msg_flags & MSG_MORE)) {
- err = ip_push_pending_frames(sk);
+ err = ip_push_pending_frames(sk, &fl4);
if (err == -ENOBUFS && !inet->recverr)
err = 0;
}
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index c1acf69..b24d58e 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -156,7 +156,7 @@
u32 *p = NULL;
if (!rt->peer)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
if (peer) {
@@ -424,7 +424,7 @@
dst_metric(&r->dst, RTAX_WINDOW),
(int)((dst_metric(&r->dst, RTAX_RTT) >> 3) +
dst_metric(&r->dst, RTAX_RTTVAR)),
- r->rt_tos,
+ r->rt_key_tos,
r->dst.hh ? atomic_read(&r->dst.hh->hh_refcnt) : -1,
r->dst.hh ? (r->dst.hh->hh_output ==
dev_queue_xmit) : 0,
@@ -724,7 +724,7 @@
return (((__force u32)rt1->rt_key_dst ^ (__force u32)rt2->rt_key_dst) |
((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) |
(rt1->rt_mark ^ rt2->rt_mark) |
- (rt1->rt_tos ^ rt2->rt_tos) |
+ (rt1->rt_key_tos ^ rt2->rt_key_tos) |
(rt1->rt_oif ^ rt2->rt_oif) |
(rt1->rt_iif ^ rt2->rt_iif)) == 0;
}
@@ -968,10 +968,6 @@
break;
expire >>= 1;
-#if RT_CACHE_DEBUG >= 2
- printk(KERN_DEBUG "expire>> %u %d %d %d\n", expire,
- dst_entries_get_fast(&ipv4_dst_ops), goal, i);
-#endif
if (dst_entries_get_fast(&ipv4_dst_ops) < ip_rt_max_size)
goto out;
@@ -992,10 +988,6 @@
dst_entries_get_fast(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh ||
dst_entries_get_slow(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh)
expire = ip_rt_gc_timeout;
-#if RT_CACHE_DEBUG >= 2
- printk(KERN_DEBUG "expire++ %u %d %d %d\n", expire,
- dst_entries_get_fast(&ipv4_dst_ops), goal, rover);
-#endif
out: return 0;
}
@@ -1179,16 +1171,6 @@
rt->dst.rt_next = rt_hash_table[hash].chain;
-#if RT_CACHE_DEBUG >= 2
- if (rt->dst.rt_next) {
- struct rtable *trt;
- printk(KERN_DEBUG "rt_cache @%02x: %pI4",
- hash, &rt->rt_dst);
- for (trt = rt->dst.rt_next; trt; trt = trt->dst.rt_next)
- printk(" . %pI4", &trt->rt_dst);
- printk("\n");
- }
-#endif
/*
* Since lookup is lockfree, we must make sure
* previous writes to rt are committed to memory
@@ -1211,11 +1193,11 @@
return atomic_read(&__rt_peer_genid);
}
-void rt_bind_peer(struct rtable *rt, int create)
+void rt_bind_peer(struct rtable *rt, __be32 daddr, int create)
{
struct inet_peer *peer;
- peer = inet_getpeer_v4(rt->rt_dst, create);
+ peer = inet_getpeer_v4(daddr, create);
if (peer && cmpxchg(&rt->peer, NULL, peer) != NULL)
inet_putpeer(peer);
@@ -1249,7 +1231,7 @@
if (rt) {
if (rt->peer == NULL)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, rt->rt_dst, 1);
/* If peer is attached to destination, it is never detached,
so that we need not to grab a lock to dereference it.
@@ -1347,10 +1329,6 @@
unsigned hash = rt_hash(rt->rt_key_dst, rt->rt_key_src,
rt->rt_oif,
rt_genid(dev_net(dst->dev)));
-#if RT_CACHE_DEBUG >= 1
- printk(KERN_DEBUG "ipv4_negative_advice: redirect to %pI4/%02x dropped\n",
- &rt->rt_dst, rt->rt_tos);
-#endif
rt_del(hash, rt);
ret = NULL;
} else if (rt->peer &&
@@ -1399,7 +1377,7 @@
rcu_read_unlock();
if (!rt->peer)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
if (!peer) {
icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, rt->rt_gateway);
@@ -1435,7 +1413,7 @@
peer->rate_tokens == ip_rt_redirect_number &&
net_ratelimit())
printk(KERN_WARNING "host %pI4/if%d ignores redirects for %pI4 to %pI4.\n",
- &rt->rt_src, rt->rt_iif,
+ &ip_hdr(skb)->saddr, rt->rt_iif,
&rt->rt_dst, &rt->rt_gateway);
#endif
}
@@ -1467,7 +1445,7 @@
}
if (!rt->peer)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
send = true;
@@ -1507,7 +1485,7 @@
return 68;
}
-unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
+unsigned short ip_rt_frag_needed(struct net *net, const struct iphdr *iph,
unsigned short new_mtu,
struct net_device *dev)
{
@@ -1574,7 +1552,7 @@
dst_confirm(dst);
if (!rt->peer)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
if (peer) {
if (mtu < ip_rt_min_pmtu)
@@ -1631,7 +1609,7 @@
struct inet_peer *peer;
if (!rt->peer)
- rt_bind_peer(rt, 0);
+ rt_bind_peer(rt, rt->rt_dst, 0);
peer = rt->peer;
if (peer && peer->pmtu_expires)
@@ -1699,22 +1677,26 @@
in IP options!
*/
-void ip_rt_get_source(u8 *addr, struct rtable *rt)
+void ip_rt_get_source(u8 *addr, struct sk_buff *skb, struct rtable *rt)
{
__be32 src;
- struct fib_result res;
if (rt_is_output_route(rt))
- src = rt->rt_src;
+ src = ip_hdr(skb)->saddr;
else {
- struct flowi4 fl4 = {
- .daddr = rt->rt_key_dst,
- .saddr = rt->rt_key_src,
- .flowi4_tos = rt->rt_tos,
- .flowi4_oif = rt->rt_oif,
- .flowi4_iif = rt->rt_iif,
- .flowi4_mark = rt->rt_mark,
- };
+ struct fib_result res;
+ struct flowi4 fl4;
+ struct iphdr *iph;
+
+ iph = ip_hdr(skb);
+
+ memset(&fl4, 0, sizeof(fl4));
+ fl4.daddr = iph->daddr;
+ fl4.saddr = iph->saddr;
+ fl4.flowi4_tos = iph->tos;
+ fl4.flowi4_oif = rt->dst.dev->ifindex;
+ fl4.flowi4_iif = skb->dev->ifindex;
+ fl4.flowi4_mark = skb->mark;
rcu_read_lock();
if (fib_lookup(dev_net(rt->dst.dev), &fl4, &res) == 0)
@@ -1767,7 +1749,7 @@
return mtu;
}
-static void rt_init_metrics(struct rtable *rt, const struct flowi4 *oldflp4,
+static void rt_init_metrics(struct rtable *rt, const struct flowi4 *fl4,
struct fib_info *fi)
{
struct inet_peer *peer;
@@ -1776,7 +1758,7 @@
/* If a peer entry exists for this destination, we must hook
* it up in order to get at cached metrics.
*/
- if (oldflp4 && (oldflp4->flowi4_flags & FLOWI_FLAG_PRECOW_METRICS))
+ if (fl4 && (fl4->flowi4_flags & FLOWI_FLAG_PRECOW_METRICS))
create = 1;
rt->peer = peer = inet_getpeer_v4(rt->rt_dst, create);
@@ -1803,7 +1785,7 @@
}
}
-static void rt_set_nexthop(struct rtable *rt, const struct flowi4 *oldflp4,
+static void rt_set_nexthop(struct rtable *rt, const struct flowi4 *fl4,
const struct fib_result *res,
struct fib_info *fi, u16 type, u32 itag)
{
@@ -1813,7 +1795,7 @@
if (FIB_RES_GW(*res) &&
FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
rt->rt_gateway = FIB_RES_GW(*res);
- rt_init_metrics(rt, oldflp4, fi);
+ rt_init_metrics(rt, fl4, fi);
#ifdef CONFIG_IP_ROUTE_CLASSID
dst->tclassid = FIB_RES_NH(*res).nh_tclassid;
#endif
@@ -1830,20 +1812,15 @@
#endif
set_class_tag(rt, itag);
#endif
- rt->rt_type = type;
}
-static struct rtable *rt_dst_alloc(bool nopolicy, bool noxfrm)
+static struct rtable *rt_dst_alloc(struct net_device *dev,
+ bool nopolicy, bool noxfrm)
{
- struct rtable *rt = dst_alloc(&ipv4_dst_ops, 1);
- if (rt) {
- rt->dst.obsolete = -1;
-
- rt->dst.flags = DST_HOST |
- (nopolicy ? DST_NOPOLICY : 0) |
- (noxfrm ? DST_NOXFRM : 0);
- }
- return rt;
+ return dst_alloc(&ipv4_dst_ops, dev, 1, -1,
+ DST_HOST |
+ (nopolicy ? DST_NOPOLICY : 0) |
+ (noxfrm ? DST_NOXFRM : 0));
}
/* called in rcu_read_lock() section */
@@ -1871,36 +1848,38 @@
goto e_inval;
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
} else {
- err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
- &itag, 0);
+ err = fib_validate_source(skb, saddr, 0, tos, 0, dev, &spec_dst,
+ &itag);
if (err < 0)
goto e_err;
}
- rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
+ rth = rt_dst_alloc(init_net.loopback_dev,
+ IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
if (!rth)
goto e_nobufs;
- rth->dst.output = ip_rt_bug;
-
- rth->rt_key_dst = daddr;
- rth->rt_dst = daddr;
- rth->rt_tos = tos;
- rth->rt_mark = skb->mark;
- rth->rt_key_src = saddr;
- rth->rt_src = saddr;
#ifdef CONFIG_IP_ROUTE_CLASSID
rth->dst.tclassid = itag;
#endif
- rth->rt_route_iif = dev->ifindex;
- rth->rt_iif = dev->ifindex;
- rth->dst.dev = init_net.loopback_dev;
- dev_hold(rth->dst.dev);
- rth->rt_oif = 0;
- rth->rt_gateway = daddr;
- rth->rt_spec_dst= spec_dst;
+ rth->dst.output = ip_rt_bug;
+
+ rth->rt_key_dst = daddr;
+ rth->rt_key_src = saddr;
rth->rt_genid = rt_genid(dev_net(dev));
rth->rt_flags = RTCF_MULTICAST;
rth->rt_type = RTN_MULTICAST;
+ rth->rt_key_tos = tos;
+ rth->rt_dst = daddr;
+ rth->rt_src = saddr;
+ rth->rt_route_iif = dev->ifindex;
+ rth->rt_iif = dev->ifindex;
+ rth->rt_oif = 0;
+ rth->rt_mark = skb->mark;
+ rth->rt_gateway = daddr;
+ rth->rt_spec_dst= spec_dst;
+ rth->rt_peer_genid = 0;
+ rth->peer = NULL;
+ rth->fi = NULL;
if (our) {
rth->dst.input= ip_local_deliver;
rth->rt_flags |= RTCF_LOCAL;
@@ -1981,8 +1960,8 @@
}
- err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res),
- in_dev->dev, &spec_dst, &itag, skb->mark);
+ err = fib_validate_source(skb, saddr, daddr, tos, FIB_RES_OIF(*res),
+ in_dev->dev, &spec_dst, &itag);
if (err < 0) {
ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr,
saddr);
@@ -2013,7 +1992,8 @@
}
}
- rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY),
+ rth = rt_dst_alloc(out_dev->dev,
+ IN_DEV_CONF_GET(in_dev, NOPOLICY),
IN_DEV_CONF_GET(out_dev, NOXFRM));
if (!rth) {
err = -ENOBUFS;
@@ -2021,27 +2001,28 @@
}
rth->rt_key_dst = daddr;
- rth->rt_dst = daddr;
- rth->rt_tos = tos;
- rth->rt_mark = skb->mark;
rth->rt_key_src = saddr;
+ rth->rt_genid = rt_genid(dev_net(rth->dst.dev));
+ rth->rt_flags = flags;
+ rth->rt_type = res->type;
+ rth->rt_key_tos = tos;
+ rth->rt_dst = daddr;
rth->rt_src = saddr;
- rth->rt_gateway = daddr;
rth->rt_route_iif = in_dev->dev->ifindex;
rth->rt_iif = in_dev->dev->ifindex;
- rth->dst.dev = (out_dev)->dev;
- dev_hold(rth->dst.dev);
rth->rt_oif = 0;
+ rth->rt_mark = skb->mark;
+ rth->rt_gateway = daddr;
rth->rt_spec_dst= spec_dst;
+ rth->rt_peer_genid = 0;
+ rth->peer = NULL;
+ rth->fi = NULL;
rth->dst.input = ip_forward;
rth->dst.output = ip_output;
- rth->rt_genid = rt_genid(dev_net(rth->dst.dev));
rt_set_nexthop(rth, NULL, res, res->fi, res->type, itag);
- rth->rt_flags = flags;
-
*result = rth;
err = 0;
cleanup:
@@ -2150,9 +2131,9 @@
goto brd_input;
if (res.type == RTN_LOCAL) {
- err = fib_validate_source(saddr, daddr, tos,
+ err = fib_validate_source(skb, saddr, daddr, tos,
net->loopback_dev->ifindex,
- dev, &spec_dst, &itag, skb->mark);
+ dev, &spec_dst, &itag);
if (err < 0)
goto martian_source_keep_err;
if (err)
@@ -2176,8 +2157,8 @@
if (ipv4_is_zeronet(saddr))
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
else {
- err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
- &itag, skb->mark);
+ err = fib_validate_source(skb, saddr, 0, tos, 0, dev, &spec_dst,
+ &itag);
if (err < 0)
goto martian_source_keep_err;
if (err)
@@ -2188,36 +2169,42 @@
RT_CACHE_STAT_INC(in_brd);
local_input:
- rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
+ rth = rt_dst_alloc(net->loopback_dev,
+ IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
if (!rth)
goto e_nobufs;
+ rth->dst.input= ip_local_deliver;
rth->dst.output= ip_rt_bug;
- rth->rt_genid = rt_genid(net);
+#ifdef CONFIG_IP_ROUTE_CLASSID
+ rth->dst.tclassid = itag;
+#endif
rth->rt_key_dst = daddr;
- rth->rt_dst = daddr;
- rth->rt_tos = tos;
- rth->rt_mark = skb->mark;
rth->rt_key_src = saddr;
+ rth->rt_genid = rt_genid(net);
+ rth->rt_flags = flags|RTCF_LOCAL;
+ rth->rt_type = res.type;
+ rth->rt_key_tos = tos;
+ rth->rt_dst = daddr;
rth->rt_src = saddr;
#ifdef CONFIG_IP_ROUTE_CLASSID
rth->dst.tclassid = itag;
#endif
rth->rt_route_iif = dev->ifindex;
rth->rt_iif = dev->ifindex;
- rth->dst.dev = net->loopback_dev;
- dev_hold(rth->dst.dev);
+ rth->rt_oif = 0;
+ rth->rt_mark = skb->mark;
rth->rt_gateway = daddr;
rth->rt_spec_dst= spec_dst;
- rth->dst.input= ip_local_deliver;
- rth->rt_flags = flags|RTCF_LOCAL;
+ rth->rt_peer_genid = 0;
+ rth->peer = NULL;
+ rth->fi = NULL;
if (res.type == RTN_UNREACHABLE) {
rth->dst.input= ip_error;
rth->dst.error= -err;
rth->rt_flags &= ~RTCF_LOCAL;
}
- rth->rt_type = res.type;
hash = rt_hash(daddr, saddr, fl4.flowi4_iif, rt_genid(net));
rth = rt_intern_hash(hash, rth, skb, fl4.flowi4_iif);
err = 0;
@@ -2288,7 +2275,7 @@
((__force u32)rth->rt_key_src ^ (__force u32)saddr) |
(rth->rt_iif ^ iif) |
rth->rt_oif |
- (rth->rt_tos ^ tos)) == 0 &&
+ (rth->rt_key_tos ^ tos)) == 0 &&
rth->rt_mark == skb->mark &&
net_eq(dev_net(rth->dst.dev), net) &&
!rt_is_expired(rth)) {
@@ -2349,12 +2336,12 @@
/* called with rcu_read_lock() */
static struct rtable *__mkroute_output(const struct fib_result *res,
const struct flowi4 *fl4,
- const struct flowi4 *oldflp4,
- struct net_device *dev_out,
+ __be32 orig_daddr, __be32 orig_saddr,
+ int orig_oif, struct net_device *dev_out,
unsigned int flags)
{
struct fib_info *fi = res->fi;
- u32 tos = RT_FL_TOS(oldflp4);
+ u32 tos = RT_FL_TOS(fl4);
struct in_device *in_dev;
u16 type = res->type;
struct rtable *rth;
@@ -2381,8 +2368,8 @@
fi = NULL;
} else if (type == RTN_MULTICAST) {
flags |= RTCF_MULTICAST | RTCF_LOCAL;
- if (!ip_check_mc_rcu(in_dev, oldflp4->daddr, oldflp4->saddr,
- oldflp4->flowi4_proto))
+ if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr,
+ fl4->flowi4_proto))
flags &= ~RTCF_LOCAL;
/* If multicast route do not exist use
* default one, but do not gateway in this case.
@@ -2392,29 +2379,31 @@
fi = NULL;
}
- rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY),
+ rth = rt_dst_alloc(dev_out,
+ IN_DEV_CONF_GET(in_dev, NOPOLICY),
IN_DEV_CONF_GET(in_dev, NOXFRM));
if (!rth)
return ERR_PTR(-ENOBUFS);
- rth->rt_key_dst = oldflp4->daddr;
- rth->rt_tos = tos;
- rth->rt_key_src = oldflp4->saddr;
- rth->rt_oif = oldflp4->flowi4_oif;
- rth->rt_mark = oldflp4->flowi4_mark;
+ rth->dst.output = ip_output;
+
+ rth->rt_key_dst = orig_daddr;
+ rth->rt_key_src = orig_saddr;
+ rth->rt_genid = rt_genid(dev_net(dev_out));
+ rth->rt_flags = flags;
+ rth->rt_type = type;
+ rth->rt_key_tos = tos;
rth->rt_dst = fl4->daddr;
rth->rt_src = fl4->saddr;
rth->rt_route_iif = 0;
- rth->rt_iif = oldflp4->flowi4_oif ? : dev_out->ifindex;
- /* get references to the devices that are to be hold by the routing
- cache entry */
- rth->dst.dev = dev_out;
- dev_hold(dev_out);
+ rth->rt_iif = orig_oif ? : dev_out->ifindex;
+ rth->rt_oif = orig_oif;
+ rth->rt_mark = fl4->flowi4_mark;
rth->rt_gateway = fl4->daddr;
rth->rt_spec_dst= fl4->saddr;
-
- rth->dst.output=ip_output;
- rth->rt_genid = rt_genid(dev_net(dev_out));
+ rth->rt_peer_genid = 0;
+ rth->peer = NULL;
+ rth->fi = NULL;
RT_CACHE_STAT_INC(out_slow_tot);
@@ -2432,7 +2421,7 @@
#ifdef CONFIG_IP_MROUTE
if (type == RTN_MULTICAST) {
if (IN_DEV_MFORWARD(in_dev) &&
- !ipv4_is_local_multicast(oldflp4->daddr)) {
+ !ipv4_is_local_multicast(fl4->daddr)) {
rth->dst.input = ip_mr_input;
rth->dst.output = ip_mc_output;
}
@@ -2440,9 +2429,8 @@
#endif
}
- rt_set_nexthop(rth, oldflp4, res, fi, type, 0);
+ rt_set_nexthop(rth, fl4, res, fi, type, 0);
- rth->rt_flags = flags;
return rth;
}
@@ -2451,36 +2439,37 @@
* called with rcu_read_lock();
*/
-static struct rtable *ip_route_output_slow(struct net *net,
- const struct flowi4 *oldflp4)
+static struct rtable *ip_route_output_slow(struct net *net, struct flowi4 *fl4)
{
- u32 tos = RT_FL_TOS(oldflp4);
- struct flowi4 fl4;
- struct fib_result res;
- unsigned int flags = 0;
struct net_device *dev_out = NULL;
+ u32 tos = RT_FL_TOS(fl4);
+ unsigned int flags = 0;
+ struct fib_result res;
struct rtable *rth;
+ __be32 orig_daddr;
+ __be32 orig_saddr;
+ int orig_oif;
res.fi = NULL;
#ifdef CONFIG_IP_MULTIPLE_TABLES
res.r = NULL;
#endif
- fl4.flowi4_oif = oldflp4->flowi4_oif;
- fl4.flowi4_iif = net->loopback_dev->ifindex;
- fl4.flowi4_mark = oldflp4->flowi4_mark;
- fl4.daddr = oldflp4->daddr;
- fl4.saddr = oldflp4->saddr;
- fl4.flowi4_tos = tos & IPTOS_RT_MASK;
- fl4.flowi4_scope = ((tos & RTO_ONLINK) ?
- RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
+ orig_daddr = fl4->daddr;
+ orig_saddr = fl4->saddr;
+ orig_oif = fl4->flowi4_oif;
+
+ fl4->flowi4_iif = net->loopback_dev->ifindex;
+ fl4->flowi4_tos = tos & IPTOS_RT_MASK;
+ fl4->flowi4_scope = ((tos & RTO_ONLINK) ?
+ RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
rcu_read_lock();
- if (oldflp4->saddr) {
+ if (fl4->saddr) {
rth = ERR_PTR(-EINVAL);
- if (ipv4_is_multicast(oldflp4->saddr) ||
- ipv4_is_lbcast(oldflp4->saddr) ||
- ipv4_is_zeronet(oldflp4->saddr))
+ if (ipv4_is_multicast(fl4->saddr) ||
+ ipv4_is_lbcast(fl4->saddr) ||
+ ipv4_is_zeronet(fl4->saddr))
goto out;
/* I removed check for oif == dev_out->oif here.
@@ -2491,11 +2480,11 @@
of another iface. --ANK
*/
- if (oldflp4->flowi4_oif == 0 &&
- (ipv4_is_multicast(oldflp4->daddr) ||
- ipv4_is_lbcast(oldflp4->daddr))) {
+ if (fl4->flowi4_oif == 0 &&
+ (ipv4_is_multicast(fl4->daddr) ||
+ ipv4_is_lbcast(fl4->daddr))) {
/* It is equivalent to inet_addr_type(saddr) == RTN_LOCAL */
- dev_out = __ip_dev_find(net, oldflp4->saddr, false);
+ dev_out = __ip_dev_find(net, fl4->saddr, false);
if (dev_out == NULL)
goto out;
@@ -2514,20 +2503,20 @@
Luckily, this hack is good workaround.
*/
- fl4.flowi4_oif = dev_out->ifindex;
+ fl4->flowi4_oif = dev_out->ifindex;
goto make_route;
}
- if (!(oldflp4->flowi4_flags & FLOWI_FLAG_ANYSRC)) {
+ if (!(fl4->flowi4_flags & FLOWI_FLAG_ANYSRC)) {
/* It is equivalent to inet_addr_type(saddr) == RTN_LOCAL */
- if (!__ip_dev_find(net, oldflp4->saddr, false))
+ if (!__ip_dev_find(net, fl4->saddr, false))
goto out;
}
}
- if (oldflp4->flowi4_oif) {
- dev_out = dev_get_by_index_rcu(net, oldflp4->flowi4_oif);
+ if (fl4->flowi4_oif) {
+ dev_out = dev_get_by_index_rcu(net, fl4->flowi4_oif);
rth = ERR_PTR(-ENODEV);
if (dev_out == NULL)
goto out;
@@ -2537,37 +2526,37 @@
rth = ERR_PTR(-ENETUNREACH);
goto out;
}
- if (ipv4_is_local_multicast(oldflp4->daddr) ||
- ipv4_is_lbcast(oldflp4->daddr)) {
- if (!fl4.saddr)
- fl4.saddr = inet_select_addr(dev_out, 0,
- RT_SCOPE_LINK);
+ if (ipv4_is_local_multicast(fl4->daddr) ||
+ ipv4_is_lbcast(fl4->daddr)) {
+ if (!fl4->saddr)
+ fl4->saddr = inet_select_addr(dev_out, 0,
+ RT_SCOPE_LINK);
goto make_route;
}
- if (!fl4.saddr) {
- if (ipv4_is_multicast(oldflp4->daddr))
- fl4.saddr = inet_select_addr(dev_out, 0,
- fl4.flowi4_scope);
- else if (!oldflp4->daddr)
- fl4.saddr = inet_select_addr(dev_out, 0,
- RT_SCOPE_HOST);
+ if (fl4->saddr) {
+ if (ipv4_is_multicast(fl4->daddr))
+ fl4->saddr = inet_select_addr(dev_out, 0,
+ fl4->flowi4_scope);
+ else if (!fl4->daddr)
+ fl4->saddr = inet_select_addr(dev_out, 0,
+ RT_SCOPE_HOST);
}
}
- if (!fl4.daddr) {
- fl4.daddr = fl4.saddr;
- if (!fl4.daddr)
- fl4.daddr = fl4.saddr = htonl(INADDR_LOOPBACK);
+ if (!fl4->daddr) {
+ fl4->daddr = fl4->saddr;
+ if (!fl4->daddr)
+ fl4->daddr = fl4->saddr = htonl(INADDR_LOOPBACK);
dev_out = net->loopback_dev;
- fl4.flowi4_oif = net->loopback_dev->ifindex;
+ fl4->flowi4_oif = net->loopback_dev->ifindex;
res.type = RTN_LOCAL;
flags |= RTCF_LOCAL;
goto make_route;
}
- if (fib_lookup(net, &fl4, &res)) {
+ if (fib_lookup(net, fl4, &res)) {
res.fi = NULL;
- if (oldflp4->flowi4_oif) {
+ if (fl4->flowi4_oif) {
/* Apparently, routing tables are wrong. Assume,
that the destination is on link.
@@ -2586,9 +2575,9 @@
likely IPv6, but we do not.
*/
- if (fl4.saddr == 0)
- fl4.saddr = inet_select_addr(dev_out, 0,
- RT_SCOPE_LINK);
+ if (fl4->saddr == 0)
+ fl4->saddr = inet_select_addr(dev_out, 0,
+ RT_SCOPE_LINK);
res.type = RTN_UNICAST;
goto make_route;
}
@@ -2597,42 +2586,45 @@
}
if (res.type == RTN_LOCAL) {
- if (!fl4.saddr) {
+ if (!fl4->saddr) {
if (res.fi->fib_prefsrc)
- fl4.saddr = res.fi->fib_prefsrc;
+ fl4->saddr = res.fi->fib_prefsrc;
else
- fl4.saddr = fl4.daddr;
+ fl4->saddr = fl4->daddr;
}
dev_out = net->loopback_dev;
- fl4.flowi4_oif = dev_out->ifindex;
+ fl4->flowi4_oif = dev_out->ifindex;
res.fi = NULL;
flags |= RTCF_LOCAL;
goto make_route;
}
#ifdef CONFIG_IP_ROUTE_MULTIPATH
- if (res.fi->fib_nhs > 1 && fl4.flowi4_oif == 0)
+ if (res.fi->fib_nhs > 1 && fl4->flowi4_oif == 0)
fib_select_multipath(&res);
else
#endif
- if (!res.prefixlen && res.type == RTN_UNICAST && !fl4.flowi4_oif)
+ if (!res.prefixlen &&
+ res.table->tb_num_default > 1 &&
+ res.type == RTN_UNICAST && !fl4->flowi4_oif)
fib_select_default(&res);
- if (!fl4.saddr)
- fl4.saddr = FIB_RES_PREFSRC(net, res);
+ if (!fl4->saddr)
+ fl4->saddr = FIB_RES_PREFSRC(net, res);
dev_out = FIB_RES_DEV(res);
- fl4.flowi4_oif = dev_out->ifindex;
+ fl4->flowi4_oif = dev_out->ifindex;
make_route:
- rth = __mkroute_output(&res, &fl4, oldflp4, dev_out, flags);
+ rth = __mkroute_output(&res, fl4, orig_daddr, orig_saddr, orig_oif,
+ dev_out, flags);
if (!IS_ERR(rth)) {
unsigned int hash;
- hash = rt_hash(oldflp4->daddr, oldflp4->saddr, oldflp4->flowi4_oif,
+ hash = rt_hash(orig_daddr, orig_saddr, orig_oif,
rt_genid(dev_net(dev_out)));
- rth = rt_intern_hash(hash, rth, NULL, oldflp4->flowi4_oif);
+ rth = rt_intern_hash(hash, rth, NULL, orig_oif);
}
out:
@@ -2640,7 +2632,7 @@
return rth;
}
-struct rtable *__ip_route_output_key(struct net *net, const struct flowi4 *flp4)
+struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4)
{
struct rtable *rth;
unsigned int hash;
@@ -2658,13 +2650,17 @@
rt_is_output_route(rth) &&
rth->rt_oif == flp4->flowi4_oif &&
rth->rt_mark == flp4->flowi4_mark &&
- !((rth->rt_tos ^ flp4->flowi4_tos) &
+ !((rth->rt_key_tos ^ flp4->flowi4_tos) &
(IPTOS_RT_MASK | RTO_ONLINK)) &&
net_eq(dev_net(rth->dst.dev), net) &&
!rt_is_expired(rth)) {
dst_use(&rth->dst, jiffies);
RT_CACHE_STAT_INC(out_hit);
rcu_read_unlock_bh();
+ if (!flp4->saddr)
+ flp4->saddr = rth->rt_src;
+ if (!flp4->daddr)
+ flp4->daddr = rth->rt_dst;
return rth;
}
RT_CACHE_STAT_INC(out_hlist_search);
@@ -2690,6 +2686,12 @@
{
}
+static u32 *ipv4_rt_blackhole_cow_metrics(struct dst_entry *dst,
+ unsigned long old)
+{
+ return NULL;
+}
+
static struct dst_ops ipv4_dst_blackhole_ops = {
.family = AF_INET,
.protocol = cpu_to_be16(ETH_P_IP),
@@ -2698,11 +2700,12 @@
.default_mtu = ipv4_blackhole_default_mtu,
.default_advmss = ipv4_default_advmss,
.update_pmtu = ipv4_rt_blackhole_update_pmtu,
+ .cow_metrics = ipv4_rt_blackhole_cow_metrics,
};
struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_orig)
{
- struct rtable *rt = dst_alloc(&ipv4_dst_blackhole_ops, 1);
+ struct rtable *rt = dst_alloc(&ipv4_dst_blackhole_ops, NULL, 1, 0, 0);
struct rtable *ort = (struct rtable *) dst_orig;
if (rt) {
@@ -2719,7 +2722,7 @@
rt->rt_key_dst = ort->rt_key_dst;
rt->rt_key_src = ort->rt_key_src;
- rt->rt_tos = ort->rt_tos;
+ rt->rt_key_tos = ort->rt_key_tos;
rt->rt_route_iif = ort->rt_route_iif;
rt->rt_iif = ort->rt_iif;
rt->rt_oif = ort->rt_oif;
@@ -2755,15 +2758,10 @@
if (IS_ERR(rt))
return rt;
- if (flp4->flowi4_proto) {
- if (!flp4->saddr)
- flp4->saddr = rt->rt_src;
- if (!flp4->daddr)
- flp4->daddr = rt->rt_dst;
+ if (flp4->flowi4_proto)
rt = (struct rtable *) xfrm_lookup(net, &rt->dst,
flowi4_to_flowi(flp4),
sk, 0);
- }
return rt;
}
@@ -2787,7 +2785,7 @@
r->rtm_family = AF_INET;
r->rtm_dst_len = 32;
r->rtm_src_len = 0;
- r->rtm_tos = rt->rt_tos;
+ r->rtm_tos = rt->rt_key_tos;
r->rtm_table = RT_TABLE_MAIN;
NLA_PUT_U32(skb, RTA_TABLE, RT_TABLE_MAIN);
r->rtm_type = rt->rt_type;
@@ -2841,7 +2839,9 @@
if (ipv4_is_multicast(dst) && !ipv4_is_local_multicast(dst) &&
IPV4_DEVCONF_ALL(net, MC_FORWARDING)) {
- int err = ipmr_get_route(net, skb, r, nowait);
+ int err = ipmr_get_route(net, skb,
+ rt->rt_src, rt->rt_dst,
+ r, nowait);
if (err <= 0) {
if (!nowait) {
if (err == 0)
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 8b44c6d..2646149 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -321,10 +321,10 @@
* the ACK carries the same options again (see RFC1122 4.2.3.8)
*/
if (opt && opt->optlen) {
- int opt_size = sizeof(struct ip_options) + opt->optlen;
+ int opt_size = sizeof(struct ip_options_rcu) + opt->optlen;
ireq->opt = kmalloc(opt_size, GFP_ATOMIC);
- if (ireq->opt != NULL && ip_options_echo(ireq->opt, skb)) {
+ if (ireq->opt != NULL && ip_options_echo(&ireq->opt->opt, skb)) {
kfree(ireq->opt);
ireq->opt = NULL;
}
@@ -345,17 +345,13 @@
* no easy way to do this.
*/
{
- struct flowi4 fl4 = {
- .flowi4_mark = sk->sk_mark,
- .daddr = ((opt && opt->srr) ?
- opt->faddr : ireq->rmt_addr),
- .saddr = ireq->loc_addr,
- .flowi4_tos = RT_CONN_FLAGS(sk),
- .flowi4_proto = IPPROTO_TCP,
- .flowi4_flags = inet_sk_flowi_flags(sk),
- .fl4_sport = th->dest,
- .fl4_dport = th->source,
- };
+ struct flowi4 fl4;
+
+ flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk),
+ RT_SCOPE_UNIVERSE, IPPROTO_TCP,
+ inet_sk_flowi_flags(sk),
+ (opt && opt->srr) ? opt->faddr : ireq->rmt_addr,
+ ireq->loc_addr, th->source, th->dest);
security_req_classify_flow(req, flowi4_to_flowi(&fl4));
rt = ip_route_output_key(sock_net(sk), &fl4);
if (IS_ERR(rt)) {
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 321e6e8..57d0752 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -13,6 +13,7 @@
#include <linux/seqlock.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/nsproxy.h>
#include <net/snmp.h>
#include <net/icmp.h>
#include <net/ip.h>
@@ -21,6 +22,7 @@
#include <net/udp.h>
#include <net/cipso_ipv4.h>
#include <net/inet_frag.h>
+#include <net/ping.h>
static int zero;
static int tcp_retr1_max = 255;
@@ -30,6 +32,8 @@
static int tcp_adv_win_scale_max = 31;
static int ip_ttl_min = 1;
static int ip_ttl_max = 255;
+static int ip_ping_group_range_min[] = { 0, 0 };
+static int ip_ping_group_range_max[] = { GID_T_MAX, GID_T_MAX };
/* Update system visible IP port range */
static void set_local_port_range(int range[2])
@@ -68,6 +72,53 @@
return ret;
}
+
+void inet_get_ping_group_range_table(struct ctl_table *table, gid_t *low, gid_t *high)
+{
+ gid_t *data = table->data;
+ unsigned seq;
+ do {
+ seq = read_seqbegin(&sysctl_local_ports.lock);
+
+ *low = data[0];
+ *high = data[1];
+ } while (read_seqretry(&sysctl_local_ports.lock, seq));
+}
+
+/* Update system visible IP port range */
+static void set_ping_group_range(struct ctl_table *table, int range[2])
+{
+ gid_t *data = table->data;
+ write_seqlock(&sysctl_local_ports.lock);
+ data[0] = range[0];
+ data[1] = range[1];
+ write_sequnlock(&sysctl_local_ports.lock);
+}
+
+/* Validate changes from /proc interface. */
+static int ipv4_ping_group_range(ctl_table *table, int write,
+ void __user *buffer,
+ size_t *lenp, loff_t *ppos)
+{
+ int ret;
+ gid_t range[2];
+ ctl_table tmp = {
+ .data = &range,
+ .maxlen = sizeof(range),
+ .mode = table->mode,
+ .extra1 = &ip_ping_group_range_min,
+ .extra2 = &ip_ping_group_range_max,
+ };
+
+ inet_get_ping_group_range_table(table, range, range + 1);
+ ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
+
+ if (write && ret == 0)
+ set_ping_group_range(table, range);
+
+ return ret;
+}
+
static int proc_tcp_congestion_control(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
@@ -677,6 +728,13 @@
.mode = 0644,
.proc_handler = proc_dointvec
},
+ {
+ .procname = "ping_group_range",
+ .data = &init_net.ipv4.sysctl_ping_group_range,
+ .maxlen = sizeof(init_net.ipv4.sysctl_ping_group_range),
+ .mode = 0644,
+ .proc_handler = ipv4_ping_group_range,
+ },
{ }
};
@@ -711,8 +769,18 @@
&net->ipv4.sysctl_icmp_ratemask;
table[6].data =
&net->ipv4.sysctl_rt_cache_rebuild_count;
+ table[7].data =
+ &net->ipv4.sysctl_ping_group_range;
+
}
+ /*
+ * Sane defaults - nobody may create ping sockets.
+ * Boot scripts should set this to distro-specific group.
+ */
+ net->ipv4.sysctl_ping_group_range[0] = 1;
+ net->ipv4.sysctl_ping_group_range[1] = 0;
+
net->ipv4.sysctl_rt_cache_rebuild_count = 4;
net->ipv4.ipv4_hdr = register_net_sysctl_table(net,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index b22d450..054a59d 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -999,7 +999,8 @@
/* We have some space in skb head. Superb! */
if (copy > skb_tailroom(skb))
copy = skb_tailroom(skb);
- if ((err = skb_add_data(skb, from, copy)) != 0)
+ err = skb_add_data_nocache(sk, skb, from, copy);
+ if (err)
goto do_fault;
} else {
int merge = 0;
@@ -1042,8 +1043,8 @@
/* Time to copy data. We are close to
* the end! */
- err = skb_copy_to_page(sk, from, skb, page,
- off, copy);
+ err = skb_copy_to_page_nocache(sk, from, skb,
+ page, off, copy);
if (err) {
/* If this page was new, give it to the
* socket so it does not get leaked.
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index 34340c9..f376b05 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -93,6 +93,7 @@
u32 ack_cnt; /* number of acks */
u32 tcp_cwnd; /* estimated tcp cwnd */
#define ACK_RATIO_SHIFT 4
+#define ACK_RATIO_LIMIT (32u << ACK_RATIO_SHIFT)
u16 delayed_ack; /* estimate the ratio of Packets/ACKs << 4 */
u8 sample_cnt; /* number of samples to decide curr_rtt */
u8 found; /* the exit point is found? */
@@ -398,8 +399,12 @@
u32 delay;
if (icsk->icsk_ca_state == TCP_CA_Open) {
- cnt -= ca->delayed_ack >> ACK_RATIO_SHIFT;
- ca->delayed_ack += cnt;
+ u32 ratio = ca->delayed_ack;
+
+ ratio -= ca->delayed_ack >> ACK_RATIO_SHIFT;
+ ratio += cnt;
+
+ ca->delayed_ack = min(ratio, ACK_RATIO_LIMIT);
}
/* Some calls are for duplicates without timetamps */
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index f7e6c2c..3c8d9b6 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -146,13 +146,15 @@
/* This will initiate an outgoing connection. */
int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
+ struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
struct inet_sock *inet = inet_sk(sk);
struct tcp_sock *tp = tcp_sk(sk);
- struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
__be16 orig_sport, orig_dport;
- struct rtable *rt;
__be32 daddr, nexthop;
+ struct flowi4 *fl4;
+ struct rtable *rt;
int err;
+ struct ip_options_rcu *inet_opt;
if (addr_len < sizeof(struct sockaddr_in))
return -EINVAL;
@@ -161,15 +163,18 @@
return -EAFNOSUPPORT;
nexthop = daddr = usin->sin_addr.s_addr;
- if (inet->opt && inet->opt->srr) {
+ inet_opt = rcu_dereference_protected(inet->inet_opt,
+ sock_owned_by_user(sk));
+ if (inet_opt && inet_opt->opt.srr) {
if (!daddr)
return -EINVAL;
- nexthop = inet->opt->faddr;
+ nexthop = inet_opt->opt.faddr;
}
orig_sport = inet->inet_sport;
orig_dport = usin->sin_port;
- rt = ip_route_connect(nexthop, inet->inet_saddr,
+ fl4 = &inet->cork.fl.u.ip4;
+ rt = ip_route_connect(fl4, nexthop, inet->inet_saddr,
RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
IPPROTO_TCP,
orig_sport, orig_dport, sk, true);
@@ -185,11 +190,11 @@
return -ENETUNREACH;
}
- if (!inet->opt || !inet->opt->srr)
- daddr = rt->rt_dst;
+ if (!inet_opt || !inet_opt->opt.srr)
+ daddr = fl4->daddr;
if (!inet->inet_saddr)
- inet->inet_saddr = rt->rt_src;
+ inet->inet_saddr = fl4->saddr;
inet->inet_rcv_saddr = inet->inet_saddr;
if (tp->rx_opt.ts_recent_stamp && inet->inet_daddr != daddr) {
@@ -200,8 +205,8 @@
}
if (tcp_death_row.sysctl_tw_recycle &&
- !tp->rx_opt.ts_recent_stamp && rt->rt_dst == daddr) {
- struct inet_peer *peer = rt_get_peer(rt);
+ !tp->rx_opt.ts_recent_stamp && fl4->daddr == daddr) {
+ struct inet_peer *peer = rt_get_peer(rt, fl4->daddr);
/*
* VJ's idea. We save last timestamp seen from
* the destination in peer table, when entering state
@@ -221,8 +226,8 @@
inet->inet_daddr = daddr;
inet_csk(sk)->icsk_ext_hdr_len = 0;
- if (inet->opt)
- inet_csk(sk)->icsk_ext_hdr_len = inet->opt->optlen;
+ if (inet_opt)
+ inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
tp->rx_opt.mss_clamp = TCP_MSS_DEFAULT;
@@ -236,8 +241,7 @@
if (err)
goto failure;
- rt = ip_route_newports(rt, IPPROTO_TCP,
- orig_sport, orig_dport,
+ rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
inet->inet_sport, inet->inet_dport, sk);
if (IS_ERR(rt)) {
err = PTR_ERR(rt);
@@ -279,7 +283,7 @@
/*
* This routine does path mtu discovery as defined in RFC1191.
*/
-static void do_pmtu_discovery(struct sock *sk, struct iphdr *iph, u32 mtu)
+static void do_pmtu_discovery(struct sock *sk, const struct iphdr *iph, u32 mtu)
{
struct dst_entry *dst;
struct inet_sock *inet = inet_sk(sk);
@@ -341,7 +345,7 @@
void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
{
- struct iphdr *iph = (struct iphdr *)icmp_skb->data;
+ const struct iphdr *iph = (const struct iphdr *)icmp_skb->data;
struct tcphdr *th = (struct tcphdr *)(icmp_skb->data + (iph->ihl << 2));
struct inet_connection_sock *icsk;
struct tcp_sock *tp;
@@ -647,7 +651,7 @@
arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
net = dev_net(skb_dst(skb)->dev);
- ip_send_reply(net->ipv4.tcp_sock, skb,
+ ip_send_reply(net->ipv4.tcp_sock, skb, ip_hdr(skb)->saddr,
&arg, arg.iov[0].iov_len);
TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
@@ -722,7 +726,7 @@
if (oif)
arg.bound_dev_if = oif;
- ip_send_reply(net->ipv4.tcp_sock, skb,
+ ip_send_reply(net->ipv4.tcp_sock, skb, ip_hdr(skb)->saddr,
&arg, arg.iov[0].iov_len);
TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
@@ -765,11 +769,12 @@
struct request_values *rvp)
{
const struct inet_request_sock *ireq = inet_rsk(req);
+ struct flowi4 fl4;
int err = -1;
struct sk_buff * skb;
/* First, grab a route. */
- if (!dst && (dst = inet_csk_route_req(sk, req)) == NULL)
+ if (!dst && (dst = inet_csk_route_req(sk, &fl4, req)) == NULL)
return -1;
skb = tcp_make_synack(sk, dst, req, rvp);
@@ -820,17 +825,18 @@
/*
* Save and compile IPv4 options into the request_sock if needed.
*/
-static struct ip_options *tcp_v4_save_options(struct sock *sk,
- struct sk_buff *skb)
+static struct ip_options_rcu *tcp_v4_save_options(struct sock *sk,
+ struct sk_buff *skb)
{
- struct ip_options *opt = &(IPCB(skb)->opt);
- struct ip_options *dopt = NULL;
+ const struct ip_options *opt = &(IPCB(skb)->opt);
+ struct ip_options_rcu *dopt = NULL;
if (opt && opt->optlen) {
- int opt_size = optlength(opt);
+ int opt_size = sizeof(*dopt) + opt->optlen;
+
dopt = kmalloc(opt_size, GFP_ATOMIC);
if (dopt) {
- if (ip_options_echo(dopt, skb)) {
+ if (ip_options_echo(&dopt->opt, skb)) {
kfree(dopt);
dopt = NULL;
}
@@ -1333,6 +1339,7 @@
req->cookie_ts = tmp_opt.tstamp_ok;
} else if (!isn) {
struct inet_peer *peer = NULL;
+ struct flowi4 fl4;
/* VJ's idea. We save last timestamp seen
* from the destination in peer table, when entering
@@ -1345,9 +1352,9 @@
*/
if (tmp_opt.saw_tstamp &&
tcp_death_row.sysctl_tw_recycle &&
- (dst = inet_csk_route_req(sk, req)) != NULL &&
- (peer = rt_get_peer((struct rtable *)dst)) != NULL &&
- peer->daddr.addr.a4 == saddr) {
+ (dst = inet_csk_route_req(sk, &fl4, req)) != NULL &&
+ fl4.daddr == saddr &&
+ (peer = rt_get_peer((struct rtable *)dst, fl4.daddr)) != NULL) {
inet_peer_refcheck(peer);
if ((u32)get_seconds() - peer->tcp_ts_stamp < TCP_PAWS_MSL &&
(s32)(peer->tcp_ts - req->ts_recent) >
@@ -1411,19 +1418,16 @@
#ifdef CONFIG_TCP_MD5SIG
struct tcp_md5sig_key *key;
#endif
+ struct ip_options_rcu *inet_opt;
if (sk_acceptq_is_full(sk))
goto exit_overflow;
- if (!dst && (dst = inet_csk_route_req(sk, req)) == NULL)
- goto exit;
-
newsk = tcp_create_openreq_child(sk, req, skb);
if (!newsk)
goto exit_nonewsk;
newsk->sk_gso_type = SKB_GSO_TCPV4;
- sk_setup_caps(newsk, dst);
newtp = tcp_sk(newsk);
newinet = inet_sk(newsk);
@@ -1431,15 +1435,21 @@
newinet->inet_daddr = ireq->rmt_addr;
newinet->inet_rcv_saddr = ireq->loc_addr;
newinet->inet_saddr = ireq->loc_addr;
- newinet->opt = ireq->opt;
+ inet_opt = ireq->opt;
+ rcu_assign_pointer(newinet->inet_opt, inet_opt);
ireq->opt = NULL;
newinet->mc_index = inet_iif(skb);
newinet->mc_ttl = ip_hdr(skb)->ttl;
inet_csk(newsk)->icsk_ext_hdr_len = 0;
- if (newinet->opt)
- inet_csk(newsk)->icsk_ext_hdr_len = newinet->opt->optlen;
+ if (inet_opt)
+ inet_csk(newsk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
newinet->inet_id = newtp->write_seq ^ jiffies;
+ if (!dst && (dst = inet_csk_route_child_sock(sk, newsk, req)) == NULL)
+ goto put_and_exit;
+
+ sk_setup_caps(newsk, dst);
+
tcp_mtup_init(newsk);
tcp_sync_mss(newsk, dst_mtu(dst));
newtp->advmss = dst_metric_advmss(dst);
@@ -1467,10 +1477,8 @@
}
#endif
- if (__inet_inherit_port(sk, newsk) < 0) {
- sock_put(newsk);
- goto exit;
- }
+ if (__inet_inherit_port(sk, newsk) < 0)
+ goto put_and_exit;
__inet_hash_nolisten(newsk, NULL);
return newsk;
@@ -1482,6 +1490,9 @@
exit:
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
+put_and_exit:
+ sock_put(newsk);
+ goto exit;
}
EXPORT_SYMBOL(tcp_v4_syn_recv_sock);
@@ -1764,12 +1775,13 @@
struct inet_sock *inet = inet_sk(sk);
struct inet_peer *peer;
- if (!rt || rt->rt_dst != inet->inet_daddr) {
+ if (!rt ||
+ inet->cork.fl.u.ip4.daddr != inet->inet_daddr) {
peer = inet_getpeer_v4(inet->inet_daddr, 1);
*release_it = true;
} else {
if (!rt->peer)
- rt_bind_peer(rt, 1);
+ rt_bind_peer(rt, inet->inet_daddr, 1);
peer = rt->peer;
*release_it = false;
}
@@ -2527,7 +2539,7 @@
struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff *skb)
{
- struct iphdr *iph = skb_gro_network_header(skb);
+ const struct iphdr *iph = skb_gro_network_header(skb);
switch (skb->ip_summed) {
case CHECKSUM_COMPLETE:
@@ -2548,7 +2560,7 @@
int tcp4_gro_complete(struct sk_buff *skb)
{
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
struct tcphdr *th = tcp_hdr(skb);
th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb),
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 17388c7..882e0b0 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -899,7 +899,7 @@
TCP_ADD_STATS(sock_net(sk), TCP_MIB_OUTSEGS,
tcp_skb_pcount(skb));
- err = icsk->icsk_af_ops->queue_xmit(skb);
+ err = icsk->icsk_af_ops->queue_xmit(skb, &inet->cork.fl);
if (likely(err <= 0))
return err;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index f87a8eb..599374f 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -578,7 +578,7 @@
void __udp4_lib_err(struct sk_buff *skb, u32 info, struct udp_table *udptable)
{
struct inet_sock *inet;
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
struct udphdr *uh = (struct udphdr *)(skb->data+(iph->ihl<<2));
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
@@ -706,12 +706,11 @@
}
}
-static int udp_send_skb(struct sk_buff *skb, __be32 daddr, __be32 dport)
+static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4)
{
struct sock *sk = skb->sk;
struct inet_sock *inet = inet_sk(sk);
struct udphdr *uh;
- struct rtable *rt = (struct rtable *)skb_dst(skb);
int err = 0;
int is_udplite = IS_UDPLITE(sk);
int offset = skb_transport_offset(skb);
@@ -723,7 +722,7 @@
*/
uh = udp_hdr(skb);
uh->source = inet->inet_sport;
- uh->dest = dport;
+ uh->dest = fl4->fl4_dport;
uh->len = htons(len);
uh->check = 0;
@@ -737,14 +736,14 @@
} else if (skb->ip_summed == CHECKSUM_PARTIAL) { /* UDP hardware csum */
- udp4_hwcsum(skb, rt->rt_src, daddr);
+ udp4_hwcsum(skb, fl4->saddr, fl4->daddr);
goto send;
} else
csum = udp_csum(skb);
/* add protocol-dependent pseudo-header */
- uh->check = csum_tcpudp_magic(rt->rt_src, daddr, len,
+ uh->check = csum_tcpudp_magic(fl4->saddr, fl4->daddr, len,
sk->sk_protocol, csum);
if (uh->check == 0)
uh->check = CSUM_MANGLED_0;
@@ -774,11 +773,11 @@
struct sk_buff *skb;
int err = 0;
- skb = ip_finish_skb(sk);
+ skb = ip_finish_skb(sk, fl4);
if (!skb)
goto out;
- err = udp_send_skb(skb, fl4->daddr, fl4->fl4_dport);
+ err = udp_send_skb(skb, fl4);
out:
up->len = 0;
@@ -791,6 +790,7 @@
{
struct inet_sock *inet = inet_sk(sk);
struct udp_sock *up = udp_sk(sk);
+ struct flowi4 fl4_stack;
struct flowi4 *fl4;
int ulen = len;
struct ipcm_cookie ipc;
@@ -804,6 +804,7 @@
int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
struct sk_buff *skb;
+ struct ip_options_data opt_copy;
if (len > 0xFFFF)
return -EMSGSIZE;
@@ -820,6 +821,7 @@
getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
+ fl4 = &inet->cork.fl.u.ip4;
if (up->pending) {
/*
* There are pending frames.
@@ -877,22 +879,32 @@
free = 1;
connected = 0;
}
- if (!ipc.opt)
- ipc.opt = inet->opt;
+ if (!ipc.opt) {
+ struct ip_options_rcu *inet_opt;
+
+ rcu_read_lock();
+ inet_opt = rcu_dereference(inet->inet_opt);
+ if (inet_opt) {
+ memcpy(&opt_copy, inet_opt,
+ sizeof(*inet_opt) + inet_opt->opt.optlen);
+ ipc.opt = &opt_copy.opt;
+ }
+ rcu_read_unlock();
+ }
saddr = ipc.addr;
ipc.addr = faddr = daddr;
- if (ipc.opt && ipc.opt->srr) {
+ if (ipc.opt && ipc.opt->opt.srr) {
if (!daddr)
return -EINVAL;
- faddr = ipc.opt->faddr;
+ faddr = ipc.opt->opt.faddr;
connected = 0;
}
tos = RT_TOS(inet->tos);
if (sock_flag(sk, SOCK_LOCALROUTE) ||
(msg->msg_flags & MSG_DONTROUTE) ||
- (ipc.opt && ipc.opt->is_strictroute)) {
+ (ipc.opt && ipc.opt->opt.is_strictroute)) {
tos |= RTO_ONLINK;
connected = 0;
}
@@ -909,22 +921,16 @@
rt = (struct rtable *)sk_dst_check(sk, 0);
if (rt == NULL) {
- struct flowi4 fl4 = {
- .flowi4_oif = ipc.oif,
- .flowi4_mark = sk->sk_mark,
- .daddr = faddr,
- .saddr = saddr,
- .flowi4_tos = tos,
- .flowi4_proto = sk->sk_protocol,
- .flowi4_flags = (inet_sk_flowi_flags(sk) |
- FLOWI_FLAG_CAN_SLEEP),
- .fl4_sport = inet->inet_sport,
- .fl4_dport = dport,
- };
struct net *net = sock_net(sk);
- security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
- rt = ip_route_output_flow(net, &fl4, sk);
+ fl4 = &fl4_stack;
+ flowi4_init_output(fl4, ipc.oif, sk->sk_mark, tos,
+ RT_SCOPE_UNIVERSE, sk->sk_protocol,
+ inet_sk_flowi_flags(sk)|FLOWI_FLAG_CAN_SLEEP,
+ faddr, saddr, dport, inet->inet_sport);
+
+ security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+ rt = ip_route_output_flow(net, fl4, sk);
if (IS_ERR(rt)) {
err = PTR_ERR(rt);
rt = NULL;
@@ -945,18 +951,18 @@
goto do_confirm;
back_from_confirm:
- saddr = rt->rt_src;
+ saddr = fl4->saddr;
if (!ipc.addr)
- daddr = ipc.addr = rt->rt_dst;
+ daddr = ipc.addr = fl4->daddr;
/* Lockless fast path for the non-corking case. */
if (!corkreq) {
- skb = ip_make_skb(sk, getfrag, msg->msg_iov, ulen,
+ skb = ip_make_skb(sk, fl4, getfrag, msg->msg_iov, ulen,
sizeof(struct udphdr), &ipc, &rt,
msg->msg_flags);
err = PTR_ERR(skb);
if (skb && !IS_ERR(skb))
- err = udp_send_skb(skb, daddr, dport);
+ err = udp_send_skb(skb, fl4);
goto out;
}
@@ -982,9 +988,9 @@
do_append_data:
up->len += ulen;
- err = ip_append_data(sk, getfrag, msg->msg_iov, ulen,
- sizeof(struct udphdr), &ipc, &rt,
- corkreq ? msg->msg_flags|MSG_MORE : msg->msg_flags);
+ err = ip_append_data(sk, fl4, getfrag, msg->msg_iov, ulen,
+ sizeof(struct udphdr), &ipc, &rt,
+ corkreq ? msg->msg_flags|MSG_MORE : msg->msg_flags);
if (err)
udp_flush_pending_frames(sk);
else if (!corkreq)
@@ -1024,6 +1030,7 @@
int udp_sendpage(struct sock *sk, struct page *page, int offset,
size_t size, int flags)
{
+ struct inet_sock *inet = inet_sk(sk);
struct udp_sock *up = udp_sk(sk);
int ret;
@@ -1048,7 +1055,8 @@
return -EINVAL;
}
- ret = ip_append_page(sk, page, offset, size, flags);
+ ret = ip_append_page(sk, &inet->cork.fl.u.ip4,
+ page, offset, size, flags);
if (ret == -EOPNOTSUPP) {
release_sock(sk);
return sock_no_sendpage(sk->sk_socket, page, offset,
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index 571aa96..2d51840 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -69,7 +69,7 @@
}
EXPORT_SYMBOL(xfrm4_prepare_output);
-static int xfrm4_output_finish(struct sk_buff *skb)
+int xfrm4_output_finish(struct sk_buff *skb)
{
#ifdef CONFIG_NETFILTER
if (!skb_dst(skb)->xfrm) {
@@ -86,7 +86,11 @@
int xfrm4_output(struct sk_buff *skb)
{
+ struct dst_entry *dst = skb_dst(skb);
+ struct xfrm_state *x = dst->xfrm;
+
return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING, skb,
- NULL, skb_dst(skb)->dev, xfrm4_output_finish,
+ NULL, dst->dev,
+ x->outer_mode->afinfo->output_finish,
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index d20a05e..981e43e 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -18,38 +18,46 @@
static struct xfrm_policy_afinfo xfrm4_policy_afinfo;
-static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
- const xfrm_address_t *saddr,
- const xfrm_address_t *daddr)
+static struct dst_entry *__xfrm4_dst_lookup(struct net *net, struct flowi4 *fl4,
+ int tos,
+ const xfrm_address_t *saddr,
+ const xfrm_address_t *daddr)
{
- struct flowi4 fl4 = {
- .daddr = daddr->a4,
- .flowi4_tos = tos,
- };
struct rtable *rt;
+ memset(fl4, 0, sizeof(*fl4));
+ fl4->daddr = daddr->a4;
+ fl4->flowi4_tos = tos;
if (saddr)
- fl4.saddr = saddr->a4;
+ fl4->saddr = saddr->a4;
- rt = __ip_route_output_key(net, &fl4);
+ rt = __ip_route_output_key(net, fl4);
if (!IS_ERR(rt))
return &rt->dst;
return ERR_CAST(rt);
}
+static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
+ const xfrm_address_t *saddr,
+ const xfrm_address_t *daddr)
+{
+ struct flowi4 fl4;
+
+ return __xfrm4_dst_lookup(net, &fl4, tos, saddr, daddr);
+}
+
static int xfrm4_get_saddr(struct net *net,
xfrm_address_t *saddr, xfrm_address_t *daddr)
{
struct dst_entry *dst;
- struct rtable *rt;
+ struct flowi4 fl4;
- dst = xfrm4_dst_lookup(net, 0, NULL, daddr);
+ dst = __xfrm4_dst_lookup(net, &fl4, 0, NULL, daddr);
if (IS_ERR(dst))
return -EHOSTUNREACH;
- rt = (struct rtable *)dst;
- saddr->a4 = rt->rt_src;
+ saddr->a4 = fl4.saddr;
dst_release(dst);
return 0;
}
@@ -73,7 +81,7 @@
rt->rt_key_dst = fl4->daddr;
rt->rt_key_src = fl4->saddr;
- rt->rt_tos = fl4->flowi4_tos;
+ rt->rt_key_tos = fl4->flowi4_tos;
rt->rt_route_iif = fl4->flowi4_iif;
rt->rt_iif = fl4->flowi4_iif;
rt->rt_oif = fl4->flowi4_oif;
@@ -102,7 +110,7 @@
static void
_decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
{
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
u8 *xprth = skb_network_header(skb) + iph->ihl * 4;
struct flowi4 *fl4 = &fl->u.ip4;
diff --git a/net/ipv4/xfrm4_state.c b/net/ipv4/xfrm4_state.c
index 1717c64..d9ac0a0 100644
--- a/net/ipv4/xfrm4_state.c
+++ b/net/ipv4/xfrm4_state.c
@@ -55,7 +55,7 @@
int xfrm4_extract_header(struct sk_buff *skb)
{
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
XFRM_MODE_SKB_CB(skb)->ihl = sizeof(*iph);
XFRM_MODE_SKB_CB(skb)->id = iph->id;
@@ -78,6 +78,7 @@
.init_tempsel = __xfrm4_init_tempsel,
.init_temprop = xfrm4_init_temprop,
.output = xfrm4_output,
+ .output_finish = xfrm4_output_finish,
.extract_input = xfrm4_extract_input,
.extract_output = xfrm4_extract_output,
.transport_finish = xfrm4_transport_finish,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 1493534..498b927 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -289,19 +289,19 @@
sizeof(struct ipstats_mib),
__alignof__(struct ipstats_mib)) < 0)
goto err_ip;
- if (snmp_mib_init((void __percpu **)idev->stats.icmpv6,
- sizeof(struct icmpv6_mib),
- __alignof__(struct icmpv6_mib)) < 0)
+ idev->stats.icmpv6dev = kzalloc(sizeof(struct icmpv6_mib_device),
+ GFP_KERNEL);
+ if (!idev->stats.icmpv6dev)
goto err_icmp;
- if (snmp_mib_init((void __percpu **)idev->stats.icmpv6msg,
- sizeof(struct icmpv6msg_mib),
- __alignof__(struct icmpv6msg_mib)) < 0)
+ idev->stats.icmpv6msgdev = kzalloc(sizeof(struct icmpv6msg_mib_device),
+ GFP_KERNEL);
+ if (!idev->stats.icmpv6msgdev)
goto err_icmpmsg;
return 0;
err_icmpmsg:
- snmp_mib_free((void __percpu **)idev->stats.icmpv6);
+ kfree(idev->stats.icmpv6dev);
err_icmp:
snmp_mib_free((void __percpu **)idev->stats.ipv6);
err_ip:
@@ -310,19 +310,13 @@
static void snmp6_free_dev(struct inet6_dev *idev)
{
- snmp_mib_free((void __percpu **)idev->stats.icmpv6msg);
- snmp_mib_free((void __percpu **)idev->stats.icmpv6);
+ kfree(idev->stats.icmpv6msgdev);
+ kfree(idev->stats.icmpv6dev);
snmp_mib_free((void __percpu **)idev->stats.ipv6);
}
/* Nobody refers to this device, we may destroy it. */
-static void in6_dev_finish_destroy_rcu(struct rcu_head *head)
-{
- struct inet6_dev *idev = container_of(head, struct inet6_dev, rcu);
- kfree(idev);
-}
-
void in6_dev_finish_destroy(struct inet6_dev *idev)
{
struct net_device *dev = idev->dev;
@@ -339,7 +333,7 @@
return;
}
snmp6_free_dev(idev);
- call_rcu(&idev->rcu, in6_dev_finish_destroy_rcu);
+ kfree_rcu(idev, rcu);
}
EXPORT_SYMBOL(in6_dev_finish_destroy);
@@ -535,12 +529,6 @@
}
#endif
-static void inet6_ifa_finish_destroy_rcu(struct rcu_head *head)
-{
- struct inet6_ifaddr *ifp = container_of(head, struct inet6_ifaddr, rcu);
- kfree(ifp);
-}
-
/* Nobody refers to this ifaddr, destroy it */
void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp)
{
@@ -561,7 +549,7 @@
}
dst_release(&ifp->rt->dst);
- call_rcu(&ifp->rcu, inet6_ifa_finish_destroy_rcu);
+ kfree_rcu(ifp, rcu);
}
static void
@@ -825,6 +813,8 @@
dst_release(&rt->dst);
}
+ /* clean up prefsrc entries */
+ rt6_remove_prefsrc(ifp);
out:
in6_ifa_put(ifp);
}
@@ -1281,7 +1271,7 @@
return cnt;
}
-int ipv6_chk_addr(struct net *net, struct in6_addr *addr,
+int ipv6_chk_addr(struct net *net, const struct in6_addr *addr,
struct net_device *dev, int strict)
{
struct inet6_ifaddr *ifp;
@@ -1324,7 +1314,7 @@
return false;
}
-int ipv6_chk_prefix(struct in6_addr *addr, struct net_device *dev)
+int ipv6_chk_prefix(const struct in6_addr *addr, struct net_device *dev)
{
struct inet6_dev *idev;
struct inet6_ifaddr *ifa;
@@ -1455,7 +1445,7 @@
/* Join to solicited addr multicast group. */
-void addrconf_join_solict(struct net_device *dev, struct in6_addr *addr)
+void addrconf_join_solict(struct net_device *dev, const struct in6_addr *addr)
{
struct in6_addr maddr;
@@ -1466,7 +1456,7 @@
ipv6_dev_mc_inc(dev, &maddr);
}
-void addrconf_leave_solict(struct inet6_dev *idev, struct in6_addr *addr)
+void addrconf_leave_solict(struct inet6_dev *idev, const struct in6_addr *addr)
{
struct in6_addr maddr;
@@ -2111,7 +2101,7 @@
/*
* Manual configuration of address on an interface
*/
-static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
+static int inet6_addr_add(struct net *net, int ifindex, const struct in6_addr *pfx,
unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
__u32 valid_lft)
{
@@ -2185,7 +2175,7 @@
return PTR_ERR(ifp);
}
-static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx,
+static int inet6_addr_del(struct net *net, int ifindex, const struct in6_addr *pfx,
unsigned int plen)
{
struct inet6_ifaddr *ifp;
@@ -2348,7 +2338,7 @@
add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
}
-static void addrconf_add_linklocal(struct inet6_dev *idev, struct in6_addr *addr)
+static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)
{
struct inet6_ifaddr * ifp;
u32 addr_flags = IFA_F_PERMANENT;
@@ -3119,7 +3109,7 @@
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
/* Check if address is a home address configured on any interface. */
-int ipv6_chk_home_addr(struct net *net, struct in6_addr *addr)
+int ipv6_chk_home_addr(struct net *net, const struct in6_addr *addr)
{
int ret = 0;
struct inet6_ifaddr *ifp = NULL;
@@ -3836,7 +3826,7 @@
+ nla_total_size(inet6_ifla6_size()); /* IFLA_PROTINFO */
}
-static inline void __snmp6_fill_stats(u64 *stats, void __percpu **mib,
+static inline void __snmp6_fill_statsdev(u64 *stats, atomic_long_t *mib,
int items, int bytes)
{
int i;
@@ -3846,7 +3836,7 @@
/* Use put_unaligned() because stats may not be aligned for u64. */
put_unaligned(items, &stats[0]);
for (i = 1; i < items; i++)
- put_unaligned(snmp_fold_field(mib, i), &stats[i]);
+ put_unaligned(atomic_long_read(&mib[i]), &stats[i]);
memset(&stats[items], 0, pad);
}
@@ -3875,7 +3865,7 @@
IPSTATS_MIB_MAX, bytes, offsetof(struct ipstats_mib, syncp));
break;
case IFLA_INET6_ICMP6STATS:
- __snmp6_fill_stats(stats, (void __percpu **)idev->stats.icmpv6, ICMP6_MIB_MAX, bytes);
+ __snmp6_fill_statsdev(stats, idev->stats.icmpv6dev->mibs, ICMP6_MIB_MAX, bytes);
break;
}
}
@@ -4537,7 +4527,7 @@
t = p->sysctl;
p->sysctl = NULL;
- unregister_sysctl_table(t->sysctl_header);
+ unregister_net_sysctl_table(t->sysctl_header);
kfree(t->dev_name);
kfree(t);
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index afcc709..b7919f9 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -740,7 +740,7 @@
static int ipv6_gso_send_check(struct sk_buff *skb)
{
- struct ipv6hdr *ipv6h;
+ const struct ipv6hdr *ipv6h;
const struct inet6_protocol *ops;
int err = -EINVAL;
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 0e5e943..674255f 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -44,7 +44,7 @@
#include <net/checksum.h>
-static int ipv6_dev_ac_dec(struct net_device *dev, struct in6_addr *addr);
+static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr);
/* Big ac list lock for all the sockets */
static DEFINE_RWLOCK(ipv6_sk_ac_lock);
@@ -54,7 +54,7 @@
* socket join an anycast group
*/
-int ipv6_sock_ac_join(struct sock *sk, int ifindex, struct in6_addr *addr)
+int ipv6_sock_ac_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct net_device *dev = NULL;
@@ -145,7 +145,7 @@
/*
* socket leave an anycast group
*/
-int ipv6_sock_ac_drop(struct sock *sk, int ifindex, struct in6_addr *addr)
+int ipv6_sock_ac_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct net_device *dev;
@@ -252,7 +252,7 @@
/*
* device anycast group inc (add if not found)
*/
-int ipv6_dev_ac_inc(struct net_device *dev, struct in6_addr *addr)
+int ipv6_dev_ac_inc(struct net_device *dev, const struct in6_addr *addr)
{
struct ifacaddr6 *aca;
struct inet6_dev *idev;
@@ -324,7 +324,7 @@
/*
* device anycast group decrement
*/
-int __ipv6_dev_ac_dec(struct inet6_dev *idev, struct in6_addr *addr)
+int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr)
{
struct ifacaddr6 *aca, *prev_aca;
@@ -358,7 +358,7 @@
}
/* called with rcu_read_lock() */
-static int ipv6_dev_ac_dec(struct net_device *dev, struct in6_addr *addr)
+static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr)
{
struct inet6_dev *idev = __in6_dev_get(dev);
@@ -371,7 +371,7 @@
* check if the interface has this anycast address
* called with rcu_read_lock()
*/
-static int ipv6_chk_acast_dev(struct net_device *dev, struct in6_addr *addr)
+static int ipv6_chk_acast_dev(struct net_device *dev, const struct in6_addr *addr)
{
struct inet6_dev *idev;
struct ifacaddr6 *aca;
@@ -392,7 +392,7 @@
* check if given interface (or any, if dev==0) has this anycast address
*/
int ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
- struct in6_addr *addr)
+ const struct in6_addr *addr)
{
int found = 0;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 5aa8ec8..1ac7938 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -371,7 +371,7 @@
iv = esp_tmp_iv(aead, tmp, seqhilen);
req = esp_tmp_req(aead, iv);
asg = esp_req_sg(aead, req);
- sg = asg + 1;
+ sg = asg + sglists;
skb->ip_summed = CHECKSUM_NONE;
@@ -430,7 +430,7 @@
u8 type, u8 code, int offset, __be32 info)
{
struct net *net = dev_net(skb->dev);
- struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
+ const struct ipv6hdr *iph = (const struct ipv6hdr *)skb->data;
struct ip_esp_hdr *esph = (struct ip_esp_hdr *)(skb->data + offset);
struct xfrm_state *x;
@@ -438,7 +438,8 @@
type != ICMPV6_PKT_TOOBIG)
return;
- x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, esph->spi, IPPROTO_ESP, AF_INET6);
+ x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+ esph->spi, IPPROTO_ESP, AF_INET6);
if (!x)
return;
printk(KERN_DEBUG "pmtu discovery on SA ESP/%08x/%pI6\n",
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 83cb4f9..1190041 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -372,7 +372,7 @@
struct ipv6hdr *hdr = ipv6_hdr(skb);
struct sock *sk;
struct ipv6_pinfo *np;
- struct in6_addr *saddr = NULL;
+ const struct in6_addr *saddr = NULL;
struct dst_entry *dst;
struct icmp6hdr tmp_hdr;
struct flowi6 fl6;
@@ -521,7 +521,7 @@
struct sock *sk;
struct inet6_dev *idev;
struct ipv6_pinfo *np;
- struct in6_addr *saddr = NULL;
+ const struct in6_addr *saddr = NULL;
struct icmp6hdr *icmph = icmp6_hdr(skb);
struct icmp6hdr tmp_hdr;
struct flowi6 fl6;
@@ -645,8 +645,8 @@
{
struct net_device *dev = skb->dev;
struct inet6_dev *idev = __in6_dev_get(dev);
- struct in6_addr *saddr, *daddr;
- struct ipv6hdr *orig_hdr;
+ const struct in6_addr *saddr, *daddr;
+ const struct ipv6hdr *orig_hdr;
struct icmp6hdr *hdr;
u8 type;
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index f2c5b0f..8a58e8c 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -203,7 +203,7 @@
return dst;
}
-int inet6_csk_xmit(struct sk_buff *skb)
+int inet6_csk_xmit(struct sk_buff *skb, struct flowi *fl_unused)
{
struct sock *sk = skb->sk;
struct inet_sock *inet = inet_sk(sk);
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 7548905..4076a0b 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -134,9 +134,9 @@
# define BITOP_BE32_SWIZZLE 0
#endif
-static __inline__ __be32 addr_bit_set(void *token, int fn_bit)
+static __inline__ __be32 addr_bit_set(const void *token, int fn_bit)
{
- __be32 *addr = token;
+ const __be32 *addr = token;
/*
* Here,
* 1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)
@@ -394,10 +394,11 @@
arg.net = net;
w->args = &arg;
+ rcu_read_lock();
for (h = s_h; h < FIB6_TABLE_HASHSZ; h++, s_e = 0) {
e = 0;
head = &net->ipv6.fib_table_hash[h];
- hlist_for_each_entry(tb, node, head, tb6_hlist) {
+ hlist_for_each_entry_rcu(tb, node, head, tb6_hlist) {
if (e < s_e)
goto next;
res = fib6_dump_table(tb, skb, cb);
@@ -408,6 +409,7 @@
}
}
out:
+ rcu_read_unlock();
cb->args[1] = e;
cb->args[0] = h;
@@ -822,7 +824,7 @@
struct lookup_args {
int offset; /* key offset on rt6_info */
- struct in6_addr *addr; /* search key */
+ const struct in6_addr *addr; /* search key */
};
static struct fib6_node * fib6_lookup_1(struct fib6_node *root,
@@ -881,8 +883,8 @@
return NULL;
}
-struct fib6_node * fib6_lookup(struct fib6_node *root, struct in6_addr *daddr,
- struct in6_addr *saddr)
+struct fib6_node * fib6_lookup(struct fib6_node *root, const struct in6_addr *daddr,
+ const struct in6_addr *saddr)
{
struct fib6_node *fn;
struct lookup_args args[] = {
@@ -916,7 +918,7 @@
static struct fib6_node * fib6_locate_1(struct fib6_node *root,
- struct in6_addr *addr,
+ const struct in6_addr *addr,
int plen, int offset)
{
struct fib6_node *fn;
@@ -946,8 +948,8 @@
}
struct fib6_node * fib6_locate(struct fib6_node *root,
- struct in6_addr *daddr, int dst_len,
- struct in6_addr *saddr, int src_len)
+ const struct in6_addr *daddr, int dst_len,
+ const struct in6_addr *saddr, int src_len)
{
struct fib6_node *fn;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index a83e920..027c7ff 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -57,7 +57,7 @@
int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
- struct ipv6hdr *hdr;
+ const struct ipv6hdr *hdr;
u32 pkt_len;
struct inet6_dev *idev;
struct net *net = dev_net(skb->dev);
@@ -186,7 +186,7 @@
int ret;
if (ipprot->flags & INET6_PROTO_FINAL) {
- struct ipv6hdr *hdr;
+ const struct ipv6hdr *hdr;
/* Free reference early: we don't need it any more,
and it may hold ip_conntrack module loaded
@@ -242,7 +242,7 @@
int ip6_mc_input(struct sk_buff *skb)
{
- struct ipv6hdr *hdr;
+ const struct ipv6hdr *hdr;
int deliver;
IP6_UPD_PO_STATS_BH(dev_net(skb_dst(skb)->dev),
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 46cf7be..9d4b165 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -869,9 +869,9 @@
return err;
}
-static inline int ip6_rt_check(struct rt6key *rt_key,
- struct in6_addr *fl_addr,
- struct in6_addr *addr_cache)
+static inline int ip6_rt_check(const struct rt6key *rt_key,
+ const struct in6_addr *fl_addr,
+ const struct in6_addr *addr_cache)
{
return (rt_key->plen != 128 || !ipv6_addr_equal(fl_addr, &rt_key->addr)) &&
(addr_cache == NULL || !ipv6_addr_equal(fl_addr, addr_cache));
@@ -879,7 +879,7 @@
static struct dst_entry *ip6_sk_dst_check(struct sock *sk,
struct dst_entry *dst,
- struct flowi6 *fl6)
+ const struct flowi6 *fl6)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct rt6_info *rt = (struct rt6_info *)dst;
@@ -930,10 +930,10 @@
goto out_err_release;
if (ipv6_addr_any(&fl6->saddr)) {
- err = ipv6_dev_get_saddr(net, ip6_dst_idev(*dst)->dev,
- &fl6->daddr,
- sk ? inet6_sk(sk)->srcprefs : 0,
- &fl6->saddr);
+ struct rt6_info *rt = (struct rt6_info *) *dst;
+ err = ip6_route_get_saddr(net, rt, &fl6->daddr,
+ sk ? inet6_sk(sk)->srcprefs : 0,
+ &fl6->saddr);
if (err)
goto out_err_release;
}
@@ -1150,6 +1150,7 @@
{
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
+ struct inet_cork *cork;
struct sk_buff *skb;
unsigned int maxfraglen, fragheaderlen;
int exthdrlen;
@@ -1163,6 +1164,7 @@
if (flags&MSG_PROBE)
return 0;
+ cork = &inet->cork.base;
if (skb_queue_empty(&sk->sk_write_queue)) {
/*
* setup for corking
@@ -1202,7 +1204,7 @@
/* need source address above miyazawa*/
}
dst_hold(&rt->dst);
- inet->cork.dst = &rt->dst;
+ cork->dst = &rt->dst;
inet->cork.fl.u.ip6 = *fl6;
np->cork.hop_limit = hlimit;
np->cork.tclass = tclass;
@@ -1212,10 +1214,10 @@
if (np->frag_size)
mtu = np->frag_size;
}
- inet->cork.fragsize = mtu;
+ cork->fragsize = mtu;
if (dst_allfrag(rt->dst.path))
- inet->cork.flags |= IPCORK_ALLFRAG;
- inet->cork.length = 0;
+ cork->flags |= IPCORK_ALLFRAG;
+ cork->length = 0;
sk->sk_sndmsg_page = NULL;
sk->sk_sndmsg_off = 0;
exthdrlen = rt->dst.header_len + (opt ? opt->opt_flen : 0) -
@@ -1223,12 +1225,12 @@
length += exthdrlen;
transhdrlen += exthdrlen;
} else {
- rt = (struct rt6_info *)inet->cork.dst;
+ rt = (struct rt6_info *)cork->dst;
fl6 = &inet->cork.fl.u.ip6;
opt = np->cork.opt;
transhdrlen = 0;
exthdrlen = 0;
- mtu = inet->cork.fragsize;
+ mtu = cork->fragsize;
}
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
@@ -1238,7 +1240,7 @@
maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen - sizeof(struct frag_hdr);
if (mtu <= sizeof(struct ipv6hdr) + IPV6_MAXPLEN) {
- if (inet->cork.length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
+ if (cork->length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
ipv6_local_error(sk, EMSGSIZE, fl6, mtu-exthdrlen);
return -EMSGSIZE;
}
@@ -1267,7 +1269,7 @@
* --yoshfuji
*/
- inet->cork.length += length;
+ cork->length += length;
if (length > mtu) {
int proto = sk->sk_protocol;
if (dontfrag && (proto == IPPROTO_UDP || proto == IPPROTO_RAW)){
@@ -1292,7 +1294,7 @@
while (length > 0) {
/* Check if the remaining data fits into current packet. */
- copy = (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
+ copy = (cork->length <= mtu && !(cork->flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
if (copy < length)
copy = maxfraglen - skb->len;
@@ -1317,7 +1319,7 @@
* we know we need more fragment(s).
*/
datalen = length + fraggap;
- if (datalen > (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - fragheaderlen)
+ if (datalen > (cork->length <= mtu && !(cork->flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - fragheaderlen)
datalen = maxfraglen - fragheaderlen;
fraglen = datalen + fragheaderlen;
@@ -1481,7 +1483,7 @@
}
return 0;
error:
- inet->cork.length -= length;
+ cork->length -= length;
IP6_INC_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
return err;
}
@@ -1497,10 +1499,10 @@
np->cork.opt = NULL;
}
- if (inet->cork.dst) {
- dst_release(inet->cork.dst);
- inet->cork.dst = NULL;
- inet->cork.flags &= ~IPCORK_ALLFRAG;
+ if (inet->cork.base.dst) {
+ dst_release(inet->cork.base.dst);
+ inet->cork.base.dst = NULL;
+ inet->cork.base.flags &= ~IPCORK_ALLFRAG;
}
memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
}
@@ -1515,7 +1517,7 @@
struct net *net = sock_net(sk);
struct ipv6hdr *hdr;
struct ipv6_txoptions *opt = np->cork.opt;
- struct rt6_info *rt = (struct rt6_info *)inet->cork.dst;
+ struct rt6_info *rt = (struct rt6_info *)inet->cork.base.dst;
struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
unsigned char proto = fl6->flowi6_proto;
int err = 0;
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index c1b1bd3..36c2842 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -162,7 +162,7 @@
for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
static struct ip6_tnl *
-ip6_tnl_lookup(struct net *net, struct in6_addr *remote, struct in6_addr *local)
+ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
{
unsigned int h0 = HASH(remote);
unsigned int h1 = HASH(local);
@@ -194,10 +194,10 @@
**/
static struct ip6_tnl __rcu **
-ip6_tnl_bucket(struct ip6_tnl_net *ip6n, struct ip6_tnl_parm *p)
+ip6_tnl_bucket(struct ip6_tnl_net *ip6n, const struct ip6_tnl_parm *p)
{
- struct in6_addr *remote = &p->raddr;
- struct in6_addr *local = &p->laddr;
+ const struct in6_addr *remote = &p->raddr;
+ const struct in6_addr *local = &p->laddr;
unsigned h = 0;
int prio = 0;
@@ -280,11 +280,6 @@
dev_net_set(dev, net);
- if (strchr(name, '%')) {
- if (dev_alloc_name(dev, name) < 0)
- goto failed_free;
- }
-
t = netdev_priv(dev);
t->parms = *p;
err = ip6_tnl_dev_init(dev);
@@ -321,8 +316,8 @@
static struct ip6_tnl *ip6_tnl_locate(struct net *net,
struct ip6_tnl_parm *p, int create)
{
- struct in6_addr *remote = &p->raddr;
- struct in6_addr *local = &p->laddr;
+ const struct in6_addr *remote = &p->raddr;
+ const struct in6_addr *local = &p->laddr;
struct ip6_tnl __rcu **tp;
struct ip6_tnl *t;
struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
@@ -374,7 +369,7 @@
static __u16
parse_tlv_tnl_enc_lim(struct sk_buff *skb, __u8 * raw)
{
- struct ipv6hdr *ipv6h = (struct ipv6hdr *) raw;
+ const struct ipv6hdr *ipv6h = (const struct ipv6hdr *) raw;
__u8 nexthdr = ipv6h->nexthdr;
__u16 off = sizeof (*ipv6h);
@@ -435,7 +430,7 @@
ip6_tnl_err(struct sk_buff *skb, __u8 ipproto, struct inet6_skb_parm *opt,
u8 *type, u8 *code, int *msg, __u32 *info, int offset)
{
- struct ipv6hdr *ipv6h = (struct ipv6hdr *) skb->data;
+ const struct ipv6hdr *ipv6h = (const struct ipv6hdr *) skb->data;
struct ip6_tnl *t;
int rel_msg = 0;
u8 rel_type = ICMPV6_DEST_UNREACH;
@@ -535,8 +530,9 @@
__u32 rel_info = ntohl(info);
int err;
struct sk_buff *skb2;
- struct iphdr *eiph;
+ const struct iphdr *eiph;
struct rtable *rt;
+ struct flowi4 fl4;
err = ip6_tnl_err(skb, IPPROTO_IPIP, opt, &rel_type, &rel_code,
&rel_msg, &rel_info, offset);
@@ -577,7 +573,7 @@
eiph = ip_hdr(skb2);
/* Try to guess incoming interface */
- rt = ip_route_output_ports(dev_net(skb->dev), NULL,
+ rt = ip_route_output_ports(dev_net(skb->dev), &fl4, NULL,
eiph->saddr, 0,
0, 0,
IPPROTO_IPIP, RT_TOS(eiph->tos), 0);
@@ -590,7 +586,7 @@
if (rt->rt_flags & RTCF_LOCAL) {
ip_rt_put(rt);
rt = NULL;
- rt = ip_route_output_ports(dev_net(skb->dev), NULL,
+ rt = ip_route_output_ports(dev_net(skb->dev), &fl4, NULL,
eiph->daddr, eiph->saddr,
0, 0,
IPPROTO_IPIP,
@@ -669,8 +665,8 @@
return 0;
}
-static void ip4ip6_dscp_ecn_decapsulate(struct ip6_tnl *t,
- struct ipv6hdr *ipv6h,
+static void ip4ip6_dscp_ecn_decapsulate(const struct ip6_tnl *t,
+ const struct ipv6hdr *ipv6h,
struct sk_buff *skb)
{
__u8 dsfield = ipv6_get_dsfield(ipv6h) & ~INET_ECN_MASK;
@@ -682,8 +678,8 @@
IP_ECN_set_ce(ip_hdr(skb));
}
-static void ip6ip6_dscp_ecn_decapsulate(struct ip6_tnl *t,
- struct ipv6hdr *ipv6h,
+static void ip6ip6_dscp_ecn_decapsulate(const struct ip6_tnl *t,
+ const struct ipv6hdr *ipv6h,
struct sk_buff *skb)
{
if (t->parms.flags & IP6_TNL_F_RCV_DSCP_COPY)
@@ -726,12 +722,12 @@
static int ip6_tnl_rcv(struct sk_buff *skb, __u16 protocol,
__u8 ipproto,
- void (*dscp_ecn_decapsulate)(struct ip6_tnl *t,
- struct ipv6hdr *ipv6h,
+ void (*dscp_ecn_decapsulate)(const struct ip6_tnl *t,
+ const struct ipv6hdr *ipv6h,
struct sk_buff *skb))
{
struct ip6_tnl *t;
- struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+ const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
rcu_read_lock();
@@ -828,7 +824,7 @@
**/
static inline int
-ip6_tnl_addr_conflict(struct ip6_tnl *t, struct ipv6hdr *hdr)
+ip6_tnl_addr_conflict(const struct ip6_tnl *t, const struct ipv6hdr *hdr)
{
return ipv6_addr_equal(&t->parms.raddr, &hdr->saddr);
}
@@ -1005,7 +1001,7 @@
ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip6_tnl *t = netdev_priv(dev);
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
int encap_limit = -1;
struct flowi6 fl6;
__u8 dsfield;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 29e4859..82a8099 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -989,8 +989,8 @@
}
static struct mfc6_cache *ip6mr_cache_find(struct mr6_table *mrt,
- struct in6_addr *origin,
- struct in6_addr *mcastgrp)
+ const struct in6_addr *origin,
+ const struct in6_addr *mcastgrp)
{
int line = MFC6_HASH(mcastgrp, origin);
struct mfc6_cache *c;
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 85cccd6..bba658d 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -55,7 +55,7 @@
{
struct net *net = dev_net(skb->dev);
__be32 spi;
- struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
+ const struct ipv6hdr *iph = (const struct ipv6hdr *)skb->data;
struct ip_comp_hdr *ipcomph =
(struct ip_comp_hdr *)(skb->data + offset);
struct xfrm_state *x;
@@ -64,7 +64,8 @@
return;
spi = htonl(ntohs(ipcomph->cpi));
- x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, spi, IPPROTO_COMP, AF_INET6);
+ x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+ spi, IPPROTO_COMP, AF_INET6);
if (!x)
return;
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 76b8937..3e6ebcd 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -92,16 +92,16 @@
static void mld_ifc_timer_expire(unsigned long data);
static void mld_ifc_event(struct inet6_dev *idev);
static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *pmc);
-static void mld_del_delrec(struct inet6_dev *idev, struct in6_addr *addr);
+static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *addr);
static void mld_clear_delrec(struct inet6_dev *idev);
static int sf_setstate(struct ifmcaddr6 *pmc);
static void sf_markstate(struct ifmcaddr6 *pmc);
static void ip6_mc_clear_src(struct ifmcaddr6 *pmc);
-static int ip6_mc_del_src(struct inet6_dev *idev, struct in6_addr *pmca,
- int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_del_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+ int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta);
-static int ip6_mc_add_src(struct inet6_dev *idev, struct in6_addr *pmca,
- int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+ int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta);
static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml,
struct inet6_dev *idev);
@@ -201,10 +201,6 @@
return 0;
}
-static void ipv6_mc_socklist_reclaim(struct rcu_head *head)
-{
- kfree(container_of(head, struct ipv6_mc_socklist, rcu));
-}
/*
* socket leave on multicast group
*/
@@ -239,7 +235,7 @@
(void) ip6_mc_leave_src(sk, mc_lst, NULL);
rcu_read_unlock();
atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
- call_rcu(&mc_lst->rcu, ipv6_mc_socklist_reclaim);
+ kfree_rcu(mc_lst, rcu);
return 0;
}
}
@@ -250,7 +246,7 @@
/* called with rcu_read_lock() */
static struct inet6_dev *ip6_mc_find_dev_rcu(struct net *net,
- struct in6_addr *group,
+ const struct in6_addr *group,
int ifindex)
{
struct net_device *dev = NULL;
@@ -307,7 +303,7 @@
rcu_read_unlock();
atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
- call_rcu(&mc_lst->rcu, ipv6_mc_socklist_reclaim);
+ kfree_rcu(mc_lst, rcu);
spin_lock(&ipv6_sk_mc_lock);
}
@@ -451,7 +447,7 @@
int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf)
{
- struct in6_addr *group;
+ const struct in6_addr *group;
struct ipv6_mc_socklist *pmc;
struct inet6_dev *idev;
struct ipv6_pinfo *inet6 = inet6_sk(sk);
@@ -542,7 +538,7 @@
struct group_filter __user *optval, int __user *optlen)
{
int err, i, count, copycount;
- struct in6_addr *group;
+ const struct in6_addr *group;
struct ipv6_mc_socklist *pmc;
struct inet6_dev *idev;
struct ipv6_pinfo *inet6 = inet6_sk(sk);
@@ -752,7 +748,7 @@
spin_unlock_bh(&idev->mc_lock);
}
-static void mld_del_delrec(struct inet6_dev *idev, struct in6_addr *pmca)
+static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *pmca)
{
struct ifmcaddr6 *pmc, *pmc_prev;
struct ip6_sf_list *psf, *psf_next;
@@ -1052,7 +1048,7 @@
/* mark EXCLUDE-mode sources */
static int mld_xmarksources(struct ifmcaddr6 *pmc, int nsrcs,
- struct in6_addr *srcs)
+ const struct in6_addr *srcs)
{
struct ip6_sf_list *psf;
int i, scount;
@@ -1080,7 +1076,7 @@
}
static int mld_marksources(struct ifmcaddr6 *pmc, int nsrcs,
- struct in6_addr *srcs)
+ const struct in6_addr *srcs)
{
struct ip6_sf_list *psf;
int i, scount;
@@ -1115,7 +1111,7 @@
{
struct mld2_query *mlh2 = NULL;
struct ifmcaddr6 *ma;
- struct in6_addr *group;
+ const struct in6_addr *group;
unsigned long max_delay;
struct inet6_dev *idev;
struct mld_msg *mld;
@@ -1821,7 +1817,7 @@
}
static int ip6_mc_del1_src(struct ifmcaddr6 *pmc, int sfmode,
- struct in6_addr *psfsrc)
+ const struct in6_addr *psfsrc)
{
struct ip6_sf_list *psf, *psf_prev;
int rv = 0;
@@ -1857,8 +1853,8 @@
return rv;
}
-static int ip6_mc_del_src(struct inet6_dev *idev, struct in6_addr *pmca,
- int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_del_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+ int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta)
{
struct ifmcaddr6 *pmc;
@@ -1918,7 +1914,7 @@
* Add multicast single-source filter to the interface list
*/
static int ip6_mc_add1_src(struct ifmcaddr6 *pmc, int sfmode,
- struct in6_addr *psfsrc, int delta)
+ const struct in6_addr *psfsrc, int delta)
{
struct ip6_sf_list *psf, *psf_prev;
@@ -2021,8 +2017,8 @@
/*
* Add multicast source filter list to the interface list
*/
-static int ip6_mc_add_src(struct inet6_dev *idev, struct in6_addr *pmca,
- int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+ int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta)
{
struct ifmcaddr6 *pmc;
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 9b21048..43242e6 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -126,7 +126,7 @@
static int mip6_destopt_input(struct xfrm_state *x, struct sk_buff *skb)
{
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
struct ipv6_destopt_hdr *destopt = (struct ipv6_destopt_hdr *)skb->data;
int err = destopt->nexthdr;
@@ -181,8 +181,8 @@
}
static inline int mip6_report_rl_allow(struct timeval *stamp,
- struct in6_addr *dst,
- struct in6_addr *src, int iif)
+ const struct in6_addr *dst,
+ const struct in6_addr *src, int iif)
{
int allow = 0;
@@ -349,7 +349,7 @@
static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
{
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
struct rt2_hdr *rt2 = (struct rt2_hdr *)skb->data;
int err = rt2->rt_hdr.nexthdr;
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 92f952d..7596f07 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -324,7 +324,7 @@
return lladdr + prepad;
}
-int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int dir)
+int ndisc_mc_map(const struct in6_addr *addr, char *buf, struct net_device *dev, int dir)
{
switch (dev->type) {
case ARPHRD_ETHER:
@@ -611,6 +611,29 @@
inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
}
+static void ndisc_send_unsol_na(struct net_device *dev)
+{
+ struct inet6_dev *idev;
+ struct inet6_ifaddr *ifa;
+ struct in6_addr mcaddr;
+
+ idev = in6_dev_get(dev);
+ if (!idev)
+ return;
+
+ read_lock_bh(&idev->lock);
+ list_for_each_entry(ifa, &idev->addr_list, if_list) {
+ addrconf_addr_solict_mult(&ifa->addr, &mcaddr);
+ ndisc_send_na(dev, NULL, &mcaddr, &ifa->addr,
+ /*router=*/ !!idev->cnf.forwarding,
+ /*solicited=*/ false, /*override=*/ true,
+ /*inc_opt=*/ true);
+ }
+ read_unlock_bh(&idev->lock);
+
+ in6_dev_put(idev);
+}
+
void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh,
const struct in6_addr *solicit,
const struct in6_addr *daddr, const struct in6_addr *saddr)
@@ -725,8 +748,8 @@
static void ndisc_recv_ns(struct sk_buff *skb)
{
struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
- struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
- struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
+ const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
+ const struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
u8 *lladdr = NULL;
u32 ndoptlen = skb->tail - (skb->transport_header +
offsetof(struct nd_msg, opt));
@@ -901,8 +924,8 @@
static void ndisc_recv_na(struct sk_buff *skb)
{
struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
- struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
- struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
+ const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
+ const struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
u8 *lladdr = NULL;
u32 ndoptlen = skb->tail - (skb->transport_header +
offsetof(struct nd_msg, opt));
@@ -945,9 +968,10 @@
}
ifp = ipv6_get_ifaddr(dev_net(dev), &msg->target, dev, 1);
if (ifp) {
- if (ifp->flags & IFA_F_TENTATIVE) {
- addrconf_dad_failure(ifp);
- return;
+ if (skb->pkt_type != PACKET_LOOPBACK
+ && (ifp->flags & IFA_F_TENTATIVE)) {
+ addrconf_dad_failure(ifp);
+ return;
}
/* What should we make now? The advertisement
is invalid, but ndisc specs say nothing
@@ -1014,7 +1038,7 @@
unsigned long ndoptlen = skb->len - sizeof(*rs_msg);
struct neighbour *neigh;
struct inet6_dev *idev;
- struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
+ const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
struct ndisc_options ndopts;
u8 *lladdr = NULL;
@@ -1411,8 +1435,8 @@
{
struct inet6_dev *in6_dev;
struct icmp6hdr *icmph;
- struct in6_addr *dest;
- struct in6_addr *target; /* new first hop to destination */
+ const struct in6_addr *dest;
+ const struct in6_addr *target; /* new first hop to destination */
struct neighbour *neigh;
int on_link = 0;
struct ndisc_options ndopts;
@@ -1445,7 +1469,7 @@
}
icmph = icmp6_hdr(skb);
- target = (struct in6_addr *) (icmph + 1);
+ target = (const struct in6_addr *) (icmph + 1);
dest = target + 1;
if (ipv6_addr_is_multicast(dest)) {
@@ -1722,6 +1746,9 @@
neigh_ifdown(&nd_tbl, dev);
fib6_run_gc(~0UL, net);
break;
+ case NETDEV_NOTIFY_PEERS:
+ ndisc_send_unsol_na(dev);
+ break;
default:
break;
}
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 28bc1f6..30fcee4 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -13,7 +13,7 @@
int ip6_route_me_harder(struct sk_buff *skb)
{
struct net *net = dev_net(skb_dst(skb)->dev);
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
struct dst_entry *dst;
struct flowi6 fl6 = {
.flowi6_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0,
@@ -67,7 +67,7 @@
struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);
if (entry->hook == NF_INET_LOCAL_OUT) {
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
rt_info->daddr = iph->daddr;
rt_info->saddr = iph->saddr;
@@ -81,7 +81,7 @@
struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);
if (entry->hook == NF_INET_LOCAL_OUT) {
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
if (!ipv6_addr_equal(&iph->daddr, &rt_info->daddr) ||
!ipv6_addr_equal(&iph->saddr, &rt_info->saddr) ||
skb->mark != rt_info->mark)
@@ -108,7 +108,7 @@
__sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
unsigned int dataoff, u_int8_t protocol)
{
- struct ipv6hdr *ip6h = ipv6_hdr(skb);
+ const struct ipv6hdr *ip6h = ipv6_hdr(skb);
__sum16 csum = 0;
switch (skb->ip_summed) {
@@ -142,7 +142,7 @@
unsigned int dataoff, unsigned int len,
u_int8_t protocol)
{
- struct ipv6hdr *ip6h = ipv6_hdr(skb);
+ const struct ipv6hdr *ip6h = ipv6_hdr(skb);
__wsum hsum;
__sum16 csum = 0;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 5a1c6f2..94874b0 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -340,6 +340,7 @@
unsigned int *stackptr, origptr, cpu;
const struct xt_table_info *private;
struct xt_action_param acpar;
+ unsigned int addend;
/* Initialization */
indev = in ? in->name : nulldevname;
@@ -358,7 +359,8 @@
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
- xt_info_rdlock_bh();
+ local_bh_disable();
+ addend = xt_write_recseq_begin();
private = table->private;
cpu = smp_processor_id();
table_base = private->entries[cpu];
@@ -442,7 +444,9 @@
} while (!acpar.hotdrop);
*stackptr = origptr;
- xt_info_rdunlock_bh();
+
+ xt_write_recseq_end(addend);
+ local_bh_enable();
#ifdef DEBUG_ALLOW_ALL
return NF_ACCEPT;
@@ -899,7 +903,7 @@
unsigned int i;
for_each_possible_cpu(cpu) {
- seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+ seqcount_t *s = &per_cpu(xt_recseq, cpu);
i = 0;
xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -907,10 +911,10 @@
unsigned int start;
do {
- start = read_seqbegin(lock);
+ start = read_seqcount_begin(s);
bcnt = iter->counters.bcnt;
pcnt = iter->counters.pcnt;
- } while (read_seqretry(lock, start));
+ } while (read_seqcount_retry(s, start));
ADD_COUNTER(counters[i], bcnt, pcnt);
++i;
@@ -1325,6 +1329,7 @@
int ret = 0;
const void *loc_cpu_entry;
struct ip6t_entry *iter;
+ unsigned int addend;
#ifdef CONFIG_COMPAT
struct compat_xt_counters_info compat_tmp;
@@ -1381,13 +1386,13 @@
i = 0;
/* Choose the copy that is on our node */
curcpu = smp_processor_id();
- xt_info_wrlock(curcpu);
+ addend = xt_write_recseq_begin();
loc_cpu_entry = private->entries[curcpu];
xt_entry_foreach(iter, loc_cpu_entry, private->size) {
ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
++i;
}
- xt_info_wrunlock(curcpu);
+ xt_write_recseq_end(addend);
unlock_up_free:
local_bh_enable();
@@ -1578,7 +1583,6 @@
struct xt_table_info *newinfo, unsigned char *base)
{
struct xt_entry_target *t;
- struct xt_target *target;
struct ip6t_entry *de;
unsigned int origsize;
int ret, h;
@@ -1600,7 +1604,6 @@
}
de->target_offset = e->target_offset - (origsize - *size);
t = compat_ip6t_get_target(e);
- target = t->u.kernel.target;
xt_compat_target_from_user(t, dstptr, size);
de->next_offset = e->next_offset - (origsize - *size);
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 28e7448..a5a4c5d 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -45,6 +45,8 @@
int tcphoff, needs_ack;
const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
struct ipv6hdr *ip6h;
+#define DEFAULT_TOS_VALUE 0x0U
+ const __u8 tclass = DEFAULT_TOS_VALUE;
struct dst_entry *dst = NULL;
u8 proto;
struct flowi6 fl6;
@@ -124,7 +126,7 @@
skb_put(nskb, sizeof(struct ipv6hdr));
skb_reset_network_header(nskb);
ip6h = ipv6_hdr(nskb);
- ip6h->version = 6;
+ *(__be32 *)ip6h = htonl(0x60000000 | (tclass << 20));
ip6h->hop_limit = ip6_dst_hoplimit(dst);
ip6h->nexthdr = IPPROTO_TCP;
ipv6_addr_copy(&ip6h->saddr, &oip6h->daddr);
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index 679a0a3..00d1917 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -64,7 +64,8 @@
(memcmp(&ipv6_hdr(skb)->saddr, &saddr, sizeof(saddr)) ||
memcmp(&ipv6_hdr(skb)->daddr, &daddr, sizeof(daddr)) ||
skb->mark != mark ||
- ipv6_hdr(skb)->hop_limit != hop_limit))
+ ipv6_hdr(skb)->hop_limit != hop_limit ||
+ flowlabel != *((u_int32_t *)ipv6_hdr(skb))))
return ip6_route_me_harder(skb) == 0 ? ret : NF_DROP;
return ret;
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 24b3558..18ff5df 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -141,7 +141,11 @@
SNMP_MIB_SENTINEL
};
-static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void __percpu **mib)
+/* can be called either with percpu mib (pcpumib != NULL),
+ * or shared one (smib != NULL)
+ */
+static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void __percpu **pcpumib,
+ atomic_long_t *smib)
{
char name[32];
int i;
@@ -158,14 +162,14 @@
snprintf(name, sizeof(name), "Icmp6%s%s",
i & 0x100 ? "Out" : "In", p);
seq_printf(seq, "%-32s\t%lu\n", name,
- snmp_fold_field(mib, i));
+ pcpumib ? snmp_fold_field(pcpumib, i) : atomic_long_read(smib + i));
}
/* print by number (nonzero only) - ICMPMsgStat format */
for (i = 0; i < ICMP6MSG_MIB_MAX; i++) {
unsigned long val;
- val = snmp_fold_field(mib, i);
+ val = pcpumib ? snmp_fold_field(pcpumib, i) : atomic_long_read(smib + i);
if (!val)
continue;
snprintf(name, sizeof(name), "Icmp6%sType%u",
@@ -174,14 +178,22 @@
}
}
-static void snmp6_seq_show_item(struct seq_file *seq, void __percpu **mib,
+/* can be called either with percpu mib (pcpumib != NULL),
+ * or shared one (smib != NULL)
+ */
+static void snmp6_seq_show_item(struct seq_file *seq, void __percpu **pcpumib,
+ atomic_long_t *smib,
const struct snmp_mib *itemlist)
{
int i;
+ unsigned long val;
- for (i = 0; itemlist[i].name; i++)
- seq_printf(seq, "%-32s\t%lu\n", itemlist[i].name,
- snmp_fold_field(mib, itemlist[i].entry));
+ for (i = 0; itemlist[i].name; i++) {
+ val = pcpumib ?
+ snmp_fold_field(pcpumib, itemlist[i].entry) :
+ atomic_long_read(smib + itemlist[i].entry);
+ seq_printf(seq, "%-32s\t%lu\n", itemlist[i].name, val);
+ }
}
static void snmp6_seq_show_item64(struct seq_file *seq, void __percpu **mib,
@@ -201,13 +213,13 @@
snmp6_seq_show_item64(seq, (void __percpu **)net->mib.ipv6_statistics,
snmp6_ipstats_list, offsetof(struct ipstats_mib, syncp));
snmp6_seq_show_item(seq, (void __percpu **)net->mib.icmpv6_statistics,
- snmp6_icmp6_list);
+ NULL, snmp6_icmp6_list);
snmp6_seq_show_icmpv6msg(seq,
- (void __percpu **)net->mib.icmpv6msg_statistics);
+ (void __percpu **)net->mib.icmpv6msg_statistics, NULL);
snmp6_seq_show_item(seq, (void __percpu **)net->mib.udp_stats_in6,
- snmp6_udp6_list);
+ NULL, snmp6_udp6_list);
snmp6_seq_show_item(seq, (void __percpu **)net->mib.udplite_stats_in6,
- snmp6_udplite6_list);
+ NULL, snmp6_udplite6_list);
return 0;
}
@@ -229,11 +241,11 @@
struct inet6_dev *idev = (struct inet6_dev *)seq->private;
seq_printf(seq, "%-32s\t%u\n", "ifIndex", idev->dev->ifindex);
- snmp6_seq_show_item(seq, (void __percpu **)idev->stats.ipv6,
+ snmp6_seq_show_item(seq, (void __percpu **)idev->stats.ipv6, NULL,
snmp6_ipstats_list);
- snmp6_seq_show_item(seq, (void __percpu **)idev->stats.icmpv6,
+ snmp6_seq_show_item(seq, NULL, idev->stats.icmpv6dev->mibs,
snmp6_icmp6_list);
- snmp6_seq_show_icmpv6msg(seq, (void __percpu **)idev->stats.icmpv6msg);
+ snmp6_seq_show_icmpv6msg(seq, NULL, idev->stats.icmpv6msgdev->mibs);
return 0;
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 4a1c3b4..ae64984 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -67,8 +67,8 @@
};
static struct sock *__raw_v6_lookup(struct net *net, struct sock *sk,
- unsigned short num, struct in6_addr *loc_addr,
- struct in6_addr *rmt_addr, int dif)
+ unsigned short num, const struct in6_addr *loc_addr,
+ const struct in6_addr *rmt_addr, int dif)
{
struct hlist_node *node;
int is_multicast = ipv6_addr_is_multicast(loc_addr);
@@ -154,8 +154,8 @@
*/
static int ipv6_raw_deliver(struct sk_buff *skb, int nexthdr)
{
- struct in6_addr *saddr;
- struct in6_addr *daddr;
+ const struct in6_addr *saddr;
+ const struct in6_addr *daddr;
struct sock *sk;
int delivered = 0;
__u8 hash;
@@ -348,7 +348,7 @@
{
struct sock *sk;
int hash;
- struct in6_addr *saddr, *daddr;
+ const struct in6_addr *saddr, *daddr;
struct net *net;
hash = nexthdr & (RAW_HTABLE_SIZE - 1);
@@ -357,7 +357,7 @@
sk = sk_head(&raw_v6_hashinfo.ht[hash]);
if (sk != NULL) {
/* Note: ipv6_hdr(skb) != skb->data */
- struct ipv6hdr *ip6h = (struct ipv6hdr *)skb->data;
+ const struct ipv6hdr *ip6h = (const struct ipv6hdr *)skb->data;
saddr = &ip6h->saddr;
daddr = &ip6h->daddr;
net = dev_net(skb->dev);
@@ -542,8 +542,8 @@
goto out;
offset = rp->offset;
- total_len = inet_sk(sk)->cork.length - (skb_network_header(skb) -
- skb->data);
+ total_len = inet_sk(sk)->cork.base.length - (skb_network_header(skb) -
+ skb->data);
if (offset >= total_len - 1) {
err = -EINVAL;
ip6_flush_pending_frames(sk);
@@ -1231,7 +1231,7 @@
static void raw6_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
{
struct ipv6_pinfo *np = inet6_sk(sp);
- struct in6_addr *dest, *src;
+ const struct in6_addr *dest, *src;
__u16 destp, srcp;
dest = &np->daddr;
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 07beeb0..7b954e2 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -224,7 +224,7 @@
}
static __inline__ struct frag_queue *
-fq_find(struct net *net, __be32 id, struct in6_addr *src, struct in6_addr *dst)
+fq_find(struct net *net, __be32 id, const struct in6_addr *src, const struct in6_addr *dst)
{
struct inet_frag_queue *q;
struct ip6_create_arg arg;
@@ -535,7 +535,7 @@
{
struct frag_hdr *fhdr;
struct frag_queue *fq;
- struct ipv6hdr *hdr = ipv6_hdr(skb);
+ const struct ipv6hdr *hdr = ipv6_hdr(skb);
struct net *net = dev_net(skb_dst(skb)->dev);
IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 843406f..de2b1de 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -89,12 +89,12 @@
#ifdef CONFIG_IPV6_ROUTE_INFO
static struct rt6_info *rt6_add_route_info(struct net *net,
- struct in6_addr *prefix, int prefixlen,
- struct in6_addr *gwaddr, int ifindex,
+ const struct in6_addr *prefix, int prefixlen,
+ const struct in6_addr *gwaddr, int ifindex,
unsigned pref);
static struct rt6_info *rt6_get_route_info(struct net *net,
- struct in6_addr *prefix, int prefixlen,
- struct in6_addr *gwaddr, int ifindex);
+ const struct in6_addr *prefix, int prefixlen,
+ const struct in6_addr *gwaddr, int ifindex);
#endif
static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old)
@@ -153,6 +153,12 @@
{
}
+static u32 *ip6_rt_blackhole_cow_metrics(struct dst_entry *dst,
+ unsigned long old)
+{
+ return NULL;
+}
+
static struct dst_ops ip6_dst_blackhole_ops = {
.family = AF_INET6,
.protocol = cpu_to_be16(ETH_P_IPV6),
@@ -161,6 +167,7 @@
.default_mtu = ip6_blackhole_default_mtu,
.default_advmss = ip6_default_advmss,
.update_pmtu = ip6_rt_blackhole_update_pmtu,
+ .cow_metrics = ip6_rt_blackhole_cow_metrics,
};
static const u32 ip6_template_metrics[RTAX_MAX] = {
@@ -220,9 +227,14 @@
#endif
/* allocate dst with ip6_dst_ops */
-static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops)
+static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops,
+ struct net_device *dev)
{
- return (struct rt6_info *)dst_alloc(ops, 0);
+ struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, 0);
+
+ memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+
+ return rt;
}
static void ip6_dst_destroy(struct dst_entry *dst)
@@ -283,7 +295,7 @@
time_after(jiffies, rt->rt6i_expires);
}
-static inline int rt6_need_strict(struct in6_addr *daddr)
+static inline int rt6_need_strict(const struct in6_addr *daddr)
{
return ipv6_addr_type(daddr) &
(IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK);
@@ -295,7 +307,7 @@
static inline struct rt6_info *rt6_device_match(struct net *net,
struct rt6_info *rt,
- struct in6_addr *saddr,
+ const struct in6_addr *saddr,
int oif,
int flags)
{
@@ -507,7 +519,7 @@
#ifdef CONFIG_IPV6_ROUTE_INFO
int rt6_route_rcv(struct net_device *dev, u8 *opt, int len,
- struct in6_addr *gwaddr)
+ const struct in6_addr *gwaddr)
{
struct net *net = dev_net(dev);
struct route_info *rinfo = (struct route_info *) opt;
@@ -670,8 +682,8 @@
return __ip6_ins_rt(rt, &info);
}
-static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, struct in6_addr *daddr,
- struct in6_addr *saddr)
+static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, const struct in6_addr *daddr,
+ const struct in6_addr *saddr)
{
struct rt6_info *rt;
@@ -739,7 +751,7 @@
return rt;
}
-static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, struct in6_addr *daddr)
+static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, const struct in6_addr *daddr)
{
struct rt6_info *rt = ip6_rt_copy(ort);
if (rt) {
@@ -830,7 +842,7 @@
void ip6_route_input(struct sk_buff *skb)
{
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
struct net *net = dev_net(skb->dev);
int flags = RT6_LOOKUP_F_HAS_SADDR;
struct flowi6 fl6 = {
@@ -874,11 +886,13 @@
struct dst_entry *ip6_blackhole_route(struct net *net, struct dst_entry *dst_orig)
{
- struct rt6_info *rt = dst_alloc(&ip6_dst_blackhole_ops, 1);
- struct rt6_info *ort = (struct rt6_info *) dst_orig;
+ struct rt6_info *rt, *ort = (struct rt6_info *) dst_orig;
struct dst_entry *new = NULL;
+ rt = dst_alloc(&ip6_dst_blackhole_ops, ort->dst.dev, 1, 0, 0);
if (rt) {
+ memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+
new = &rt->dst;
new->__use = 1;
@@ -886,9 +900,6 @@
new->output = dst_discard;
dst_copy_metrics(new, &ort->dst);
- new->dev = ort->dst.dev;
- if (new->dev)
- dev_hold(new->dev);
rt->rt6i_idev = ort->rt6i_idev;
if (rt->rt6i_idev)
in6_dev_hold(rt->rt6i_idev);
@@ -1031,13 +1042,12 @@
if (unlikely(idev == NULL))
return NULL;
- rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+ rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, dev);
if (unlikely(rt == NULL)) {
in6_dev_put(idev);
goto out;
}
- dev_hold(dev);
if (neigh)
neigh_hold(neigh);
else {
@@ -1046,7 +1056,6 @@
neigh = NULL;
}
- rt->rt6i_dev = dev;
rt->rt6i_idev = idev;
rt->rt6i_nexthop = neigh;
atomic_set(&rt->dst.__refcnt, 1);
@@ -1205,7 +1214,7 @@
goto out;
}
- rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+ rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, NULL);
if (rt == NULL) {
err = -ENOMEM;
@@ -1272,7 +1281,7 @@
}
if (cfg->fc_flags & RTF_GATEWAY) {
- struct in6_addr *gw_addr;
+ const struct in6_addr *gw_addr;
int gwa_type;
gw_addr = &cfg->fc_gateway;
@@ -1325,6 +1334,16 @@
if (dev == NULL)
goto out;
+ if (!ipv6_addr_any(&cfg->fc_prefsrc)) {
+ if (!ipv6_chk_addr(net, &cfg->fc_prefsrc, dev, 0)) {
+ err = -EINVAL;
+ goto out;
+ }
+ ipv6_addr_copy(&rt->rt6i_prefsrc.addr, &cfg->fc_prefsrc);
+ rt->rt6i_prefsrc.plen = 128;
+ } else
+ rt->rt6i_prefsrc.plen = 0;
+
if (cfg->fc_flags & (RTF_GATEWAY | RTF_NONEXTHOP)) {
rt->rt6i_nexthop = __neigh_lookup_errno(&nd_tbl, &rt->rt6i_gateway, dev);
if (IS_ERR(rt->rt6i_nexthop)) {
@@ -1502,9 +1521,9 @@
return rt;
};
-static struct rt6_info *ip6_route_redirect(struct in6_addr *dest,
- struct in6_addr *src,
- struct in6_addr *gateway,
+static struct rt6_info *ip6_route_redirect(const struct in6_addr *dest,
+ const struct in6_addr *src,
+ const struct in6_addr *gateway,
struct net_device *dev)
{
int flags = RT6_LOOKUP_F_HAS_SADDR;
@@ -1526,8 +1545,8 @@
flags, __ip6_route_redirect);
}
-void rt6_redirect(struct in6_addr *dest, struct in6_addr *src,
- struct in6_addr *saddr,
+void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src,
+ const struct in6_addr *saddr,
struct neighbour *neigh, u8 *lladdr, int on_link)
{
struct rt6_info *rt, *nrt = NULL;
@@ -1601,7 +1620,7 @@
* i.e. Path MTU discovery
*/
-static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
+static void rt6_do_pmtu_disc(const struct in6_addr *daddr, const struct in6_addr *saddr,
struct net *net, u32 pmtu, int ifindex)
{
struct rt6_info *rt, *nrt;
@@ -1686,7 +1705,7 @@
dst_release(&rt->dst);
}
-void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
+void rt6_pmtu_discovery(const struct in6_addr *daddr, const struct in6_addr *saddr,
struct net_device *dev, u32 pmtu)
{
struct net *net = dev_net(dev);
@@ -1714,7 +1733,8 @@
static struct rt6_info * ip6_rt_copy(struct rt6_info *ort)
{
struct net *net = dev_net(ort->rt6i_dev);
- struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+ struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops,
+ ort->dst.dev);
if (rt) {
rt->dst.input = ort->dst.input;
@@ -1722,9 +1742,6 @@
dst_copy_metrics(&rt->dst, &ort->dst);
rt->dst.error = ort->dst.error;
- rt->dst.dev = ort->dst.dev;
- if (rt->dst.dev)
- dev_hold(rt->dst.dev);
rt->rt6i_idev = ort->rt6i_idev;
if (rt->rt6i_idev)
in6_dev_hold(rt->rt6i_idev);
@@ -1739,6 +1756,7 @@
#ifdef CONFIG_IPV6_SUBTREES
memcpy(&rt->rt6i_src, &ort->rt6i_src, sizeof(struct rt6key));
#endif
+ memcpy(&rt->rt6i_prefsrc, &ort->rt6i_prefsrc, sizeof(struct rt6key));
rt->rt6i_table = ort->rt6i_table;
}
return rt;
@@ -1746,8 +1764,8 @@
#ifdef CONFIG_IPV6_ROUTE_INFO
static struct rt6_info *rt6_get_route_info(struct net *net,
- struct in6_addr *prefix, int prefixlen,
- struct in6_addr *gwaddr, int ifindex)
+ const struct in6_addr *prefix, int prefixlen,
+ const struct in6_addr *gwaddr, int ifindex)
{
struct fib6_node *fn;
struct rt6_info *rt = NULL;
@@ -1778,8 +1796,8 @@
}
static struct rt6_info *rt6_add_route_info(struct net *net,
- struct in6_addr *prefix, int prefixlen,
- struct in6_addr *gwaddr, int ifindex,
+ const struct in6_addr *prefix, int prefixlen,
+ const struct in6_addr *gwaddr, int ifindex,
unsigned pref)
{
struct fib6_config cfg = {
@@ -1807,7 +1825,7 @@
}
#endif
-struct rt6_info *rt6_get_dflt_router(struct in6_addr *addr, struct net_device *dev)
+struct rt6_info *rt6_get_dflt_router(const struct in6_addr *addr, struct net_device *dev)
{
struct rt6_info *rt;
struct fib6_table *table;
@@ -1829,7 +1847,7 @@
return rt;
}
-struct rt6_info *rt6_add_dflt_router(struct in6_addr *gwaddr,
+struct rt6_info *rt6_add_dflt_router(const struct in6_addr *gwaddr,
struct net_device *dev,
unsigned int pref)
{
@@ -1994,7 +2012,8 @@
int anycast)
{
struct net *net = dev_net(idev->dev);
- struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+ struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops,
+ net->loopback_dev);
struct neighbour *neigh;
if (rt == NULL) {
@@ -2004,15 +2023,12 @@
return ERR_PTR(-ENOMEM);
}
- dev_hold(net->loopback_dev);
in6_dev_hold(idev);
rt->dst.flags = DST_HOST;
rt->dst.input = ip6_input;
rt->dst.output = ip6_output;
- rt->rt6i_dev = net->loopback_dev;
rt->rt6i_idev = idev;
- dst_metric_set(&rt->dst, RTAX_HOPLIMIT, -1);
rt->dst.obsolete = -1;
rt->rt6i_flags = RTF_UP | RTF_NONEXTHOP;
@@ -2037,6 +2053,55 @@
return rt;
}
+int ip6_route_get_saddr(struct net *net,
+ struct rt6_info *rt,
+ const struct in6_addr *daddr,
+ unsigned int prefs,
+ struct in6_addr *saddr)
+{
+ struct inet6_dev *idev = ip6_dst_idev((struct dst_entry*)rt);
+ int err = 0;
+ if (rt->rt6i_prefsrc.plen)
+ ipv6_addr_copy(saddr, &rt->rt6i_prefsrc.addr);
+ else
+ err = ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
+ daddr, prefs, saddr);
+ return err;
+}
+
+/* remove deleted ip from prefsrc entries */
+struct arg_dev_net_ip {
+ struct net_device *dev;
+ struct net *net;
+ struct in6_addr *addr;
+};
+
+static int fib6_remove_prefsrc(struct rt6_info *rt, void *arg)
+{
+ struct net_device *dev = ((struct arg_dev_net_ip *)arg)->dev;
+ struct net *net = ((struct arg_dev_net_ip *)arg)->net;
+ struct in6_addr *addr = ((struct arg_dev_net_ip *)arg)->addr;
+
+ if (((void *)rt->rt6i_dev == dev || dev == NULL) &&
+ rt != net->ipv6.ip6_null_entry &&
+ ipv6_addr_equal(addr, &rt->rt6i_prefsrc.addr)) {
+ /* remove prefsrc entry */
+ rt->rt6i_prefsrc.plen = 0;
+ }
+ return 0;
+}
+
+void rt6_remove_prefsrc(struct inet6_ifaddr *ifp)
+{
+ struct net *net = dev_net(ifp->idev->dev);
+ struct arg_dev_net_ip adni = {
+ .dev = ifp->idev->dev,
+ .net = net,
+ .addr = &ifp->addr,
+ };
+ fib6_clean_all(net, fib6_remove_prefsrc, 0, &adni);
+}
+
struct arg_dev_net {
struct net_device *dev;
struct net *net;
@@ -2183,6 +2248,9 @@
nla_memcpy(&cfg->fc_src, tb[RTA_SRC], plen);
}
+ if (tb[RTA_PREFSRC])
+ nla_memcpy(&cfg->fc_prefsrc, tb[RTA_PREFSRC], 16);
+
if (tb[RTA_OIF])
cfg->fc_ifindex = nla_get_u32(tb[RTA_OIF]);
@@ -2325,13 +2393,17 @@
#endif
NLA_PUT_U32(skb, RTA_IIF, iif);
} else if (dst) {
- struct inet6_dev *idev = ip6_dst_idev(&rt->dst);
struct in6_addr saddr_buf;
- if (ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
- dst, 0, &saddr_buf) == 0)
+ if (ip6_route_get_saddr(net, rt, dst, 0, &saddr_buf) == 0)
NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
}
+ if (rt->rt6i_prefsrc.plen) {
+ struct in6_addr saddr_buf;
+ ipv6_addr_copy(&saddr_buf, &rt->rt6i_prefsrc.addr);
+ NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
+ }
+
if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0)
goto nla_put_failure;
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 43b3337..1cca576 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -250,11 +250,6 @@
dev_net_set(dev, net);
- if (strchr(name, '%')) {
- if (dev_alloc_name(dev, name) < 0)
- goto failed_free;
- }
-
nt = netdev_priv(dev);
nt->parms = *parms;
@@ -401,11 +396,6 @@
return err;
}
-static void prl_entry_destroy_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct ip_tunnel_prl_entry, rcu_head));
-}
-
static void prl_list_destroy_rcu(struct rcu_head *head)
{
struct ip_tunnel_prl_entry *p, *n;
@@ -433,7 +423,7 @@
p = &x->next) {
if (x->addr == a->addr) {
*p = x->next;
- call_rcu(&x->rcu_head, prl_entry_destroy_rcu);
+ kfree_rcu(x, rcu_head);
t->prl_count--;
goto out;
}
@@ -452,7 +442,7 @@
}
static int
-isatap_chksrc(struct sk_buff *skb, struct iphdr *iph, struct ip_tunnel *t)
+isatap_chksrc(struct sk_buff *skb, const struct iphdr *iph, struct ip_tunnel *t)
{
struct ip_tunnel_prl_entry *p;
int ok = 1;
@@ -465,7 +455,8 @@
else
skb->ndisc_nodetype = NDISC_NODETYPE_NODEFAULT;
} else {
- struct in6_addr *addr6 = &ipv6_hdr(skb)->saddr;
+ const struct in6_addr *addr6 = &ipv6_hdr(skb)->saddr;
+
if (ipv6_addr_is_isatap(addr6) &&
(addr6->s6_addr32[3] == iph->saddr) &&
ipv6_chk_prefix(addr6, t->dev))
@@ -499,7 +490,7 @@
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
- struct iphdr *iph = (struct iphdr*)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct ip_tunnel *t;
@@ -557,7 +548,7 @@
return err;
}
-static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
+static inline void ipip6_ecn_decapsulate(const struct iphdr *iph, struct sk_buff *skb)
{
if (INET_ECN_is_ce(iph->tos))
IP6_ECN_set_ce(ipv6_hdr(skb));
@@ -565,7 +556,7 @@
static int ipip6_rcv(struct sk_buff *skb)
{
- struct iphdr *iph;
+ const struct iphdr *iph;
struct ip_tunnel *tunnel;
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
@@ -621,7 +612,7 @@
* comes from 6rd / 6to4 (RFC 3056) addr space.
*/
static inline
-__be32 try_6rd(struct in6_addr *v6dst, struct ip_tunnel *tunnel)
+__be32 try_6rd(const struct in6_addr *v6dst, struct ip_tunnel *tunnel)
{
__be32 dst = 0;
@@ -664,8 +655,8 @@
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct pcpu_tstats *tstats;
- struct iphdr *tiph = &tunnel->parms.iph;
- struct ipv6hdr *iph6 = ipv6_hdr(skb);
+ const struct iphdr *tiph = &tunnel->parms.iph;
+ const struct ipv6hdr *iph6 = ipv6_hdr(skb);
u8 tos = tunnel->parms.iph.tos;
__be16 df = tiph->frag_off;
struct rtable *rt; /* Route to the other host */
@@ -673,8 +664,9 @@
struct iphdr *iph; /* Our new IP header */
unsigned int max_headroom; /* The extra header space needed */
__be32 dst = tiph->daddr;
+ struct flowi4 fl4;
int mtu;
- struct in6_addr *addr6;
+ const struct in6_addr *addr6;
int addr_type;
if (skb->protocol != htons(ETH_P_IPV6))
@@ -693,7 +685,7 @@
goto tx_error;
}
- addr6 = (struct in6_addr*)&neigh->primary_key;
+ addr6 = (const struct in6_addr*)&neigh->primary_key;
addr_type = ipv6_addr_type(addr6);
if ((addr_type & IPV6_ADDR_UNICAST) &&
@@ -718,7 +710,7 @@
goto tx_error;
}
- addr6 = (struct in6_addr*)&neigh->primary_key;
+ addr6 = (const struct in6_addr*)&neigh->primary_key;
addr_type = ipv6_addr_type(addr6);
if (addr_type == IPV6_ADDR_ANY) {
@@ -732,7 +724,7 @@
dst = addr6->s6_addr32[3];
}
- rt = ip_route_output_ports(dev_net(dev), NULL,
+ rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
dst, tiph->saddr,
0, 0,
IPPROTO_IPV6, RT_TOS(tos),
@@ -826,8 +818,8 @@
iph->frag_off = df;
iph->protocol = IPPROTO_IPV6;
iph->tos = INET_ECN_encapsulate(tos, ipv6_get_dsfield(iph6));
- iph->daddr = rt->rt_dst;
- iph->saddr = rt->rt_src;
+ iph->daddr = fl4.daddr;
+ iph->saddr = fl4.saddr;
if ((iph->ttl = tiph->ttl) == 0)
iph->ttl = iph6->hop_limit;
@@ -849,13 +841,14 @@
{
struct net_device *tdev = NULL;
struct ip_tunnel *tunnel;
- struct iphdr *iph;
+ const struct iphdr *iph;
+ struct flowi4 fl4;
tunnel = netdev_priv(dev);
iph = &tunnel->parms.iph;
if (iph->daddr) {
- struct rtable *rt = ip_route_output_ports(dev_net(dev), NULL,
+ struct rtable *rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
iph->daddr, iph->saddr,
0, 0,
IPPROTO_IPV6,
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 352c260..8b9644a 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -66,7 +66,7 @@
static DEFINE_PER_CPU(__u32 [16 + 5 + SHA_WORKSPACE_WORDS],
ipv6_cookie_scratch);
-static u32 cookie_hash(struct in6_addr *saddr, struct in6_addr *daddr,
+static u32 cookie_hash(const struct in6_addr *saddr, const struct in6_addr *daddr,
__be16 sport, __be16 dport, u32 count, int c)
{
__u32 *tmp = __get_cpu_var(ipv6_cookie_scratch);
@@ -86,7 +86,8 @@
return tmp[17];
}
-static __u32 secure_tcp_syn_cookie(struct in6_addr *saddr, struct in6_addr *daddr,
+static __u32 secure_tcp_syn_cookie(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
__be16 sport, __be16 dport, __u32 sseq,
__u32 count, __u32 data)
{
@@ -96,8 +97,8 @@
& COOKIEMASK));
}
-static __u32 check_tcp_syn_cookie(__u32 cookie, struct in6_addr *saddr,
- struct in6_addr *daddr, __be16 sport,
+static __u32 check_tcp_syn_cookie(__u32 cookie, const struct in6_addr *saddr,
+ const struct in6_addr *daddr, __be16 sport,
__be16 dport, __u32 sseq, __u32 count,
__u32 maxdiff)
{
@@ -116,7 +117,7 @@
__u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
{
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
const struct tcphdr *th = tcp_hdr(skb);
int mssind;
const __u16 mss = *mssp;
@@ -138,7 +139,7 @@
static inline int cookie_check(struct sk_buff *skb, __u32 cookie)
{
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
const struct tcphdr *th = tcp_hdr(skb);
__u32 seq = ntohl(th->seq) - 1;
__u32 mssind = check_tcp_syn_cookie(cookie, &iph->saddr, &iph->daddr,
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 4f49e5d..8683664 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -76,8 +76,8 @@
static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb);
static void __tcp_v6_send_check(struct sk_buff *skb,
- struct in6_addr *saddr,
- struct in6_addr *daddr);
+ const struct in6_addr *saddr,
+ const struct in6_addr *daddr);
static const struct inet_connection_sock_af_ops ipv6_mapped;
static const struct inet_connection_sock_af_ops ipv6_specific;
@@ -86,7 +86,7 @@
static const struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific;
#else
static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk,
- struct in6_addr *addr)
+ const struct in6_addr *addr)
{
return NULL;
}
@@ -106,8 +106,8 @@
}
static __inline__ __sum16 tcp_v6_check(int len,
- struct in6_addr *saddr,
- struct in6_addr *daddr,
+ const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
__wsum base)
{
return csum_ipv6_magic(saddr, daddr, len, IPPROTO_TCP, base);
@@ -331,7 +331,7 @@
static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
u8 type, u8 code, int offset, __be32 info)
{
- struct ipv6hdr *hdr = (struct ipv6hdr*)skb->data;
+ const struct ipv6hdr *hdr = (const struct ipv6hdr*)skb->data;
const struct tcphdr *th = (struct tcphdr *)(skb->data+offset);
struct ipv6_pinfo *np;
struct sock *sk;
@@ -551,7 +551,7 @@
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk,
- struct in6_addr *addr)
+ const struct in6_addr *addr)
{
struct tcp_sock *tp = tcp_sk(sk);
int i;
@@ -580,7 +580,7 @@
return tcp_v6_md5_do_lookup(sk, &inet6_rsk(req)->rmt_addr);
}
-static int tcp_v6_md5_do_add(struct sock *sk, struct in6_addr *peer,
+static int tcp_v6_md5_do_add(struct sock *sk, const struct in6_addr *peer,
char *newkey, u8 newkeylen)
{
/* Add key to the list */
@@ -645,7 +645,7 @@
newkey, newkeylen);
}
-static int tcp_v6_md5_do_del(struct sock *sk, struct in6_addr *peer)
+static int tcp_v6_md5_do_del(struct sock *sk, const struct in6_addr *peer)
{
struct tcp_sock *tp = tcp_sk(sk);
int i;
@@ -753,8 +753,8 @@
}
static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp,
- struct in6_addr *daddr,
- struct in6_addr *saddr, int nbytes)
+ const struct in6_addr *daddr,
+ const struct in6_addr *saddr, int nbytes)
{
struct tcp6_pseudohdr *bp;
struct scatterlist sg;
@@ -771,7 +771,7 @@
}
static int tcp_v6_md5_hash_hdr(char *md5_hash, struct tcp_md5sig_key *key,
- struct in6_addr *daddr, struct in6_addr *saddr,
+ const struct in6_addr *daddr, struct in6_addr *saddr,
struct tcphdr *th)
{
struct tcp_md5sig_pool *hp;
@@ -807,7 +807,7 @@
struct sock *sk, struct request_sock *req,
struct sk_buff *skb)
{
- struct in6_addr *saddr, *daddr;
+ const struct in6_addr *saddr, *daddr;
struct tcp_md5sig_pool *hp;
struct hash_desc *desc;
struct tcphdr *th = tcp_hdr(skb);
@@ -819,7 +819,7 @@
saddr = &inet6_rsk(req)->loc_addr;
daddr = &inet6_rsk(req)->rmt_addr;
} else {
- struct ipv6hdr *ip6h = ipv6_hdr(skb);
+ const struct ipv6hdr *ip6h = ipv6_hdr(skb);
saddr = &ip6h->saddr;
daddr = &ip6h->daddr;
}
@@ -857,7 +857,7 @@
{
__u8 *hash_location = NULL;
struct tcp_md5sig_key *hash_expected;
- struct ipv6hdr *ip6h = ipv6_hdr(skb);
+ const struct ipv6hdr *ip6h = ipv6_hdr(skb);
struct tcphdr *th = tcp_hdr(skb);
int genhash;
u8 newhash[16];
@@ -915,7 +915,7 @@
#endif
static void __tcp_v6_send_check(struct sk_buff *skb,
- struct in6_addr *saddr, struct in6_addr *daddr)
+ const struct in6_addr *saddr, const struct in6_addr *daddr)
{
struct tcphdr *th = tcp_hdr(skb);
@@ -939,7 +939,7 @@
static int tcp_v6_gso_send_check(struct sk_buff *skb)
{
- struct ipv6hdr *ipv6h;
+ const struct ipv6hdr *ipv6h;
struct tcphdr *th;
if (!pskb_may_pull(skb, sizeof(*th)))
@@ -957,7 +957,7 @@
static struct sk_buff **tcp6_gro_receive(struct sk_buff **head,
struct sk_buff *skb)
{
- struct ipv6hdr *iph = skb_gro_network_header(skb);
+ const struct ipv6hdr *iph = skb_gro_network_header(skb);
switch (skb->ip_summed) {
case CHECKSUM_COMPLETE:
@@ -978,7 +978,7 @@
static int tcp6_gro_complete(struct sk_buff *skb)
{
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
struct tcphdr *th = tcp_hdr(skb);
th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb),
@@ -1469,7 +1469,7 @@
First: no IPv4 options.
*/
- newinet->opt = NULL;
+ newinet->inet_opt = NULL;
newnp->ipv6_fl_list = NULL;
/* Clone RX bits */
@@ -1702,7 +1702,7 @@
static int tcp_v6_rcv(struct sk_buff *skb)
{
struct tcphdr *th;
- struct ipv6hdr *hdr;
+ const struct ipv6hdr *hdr;
struct sock *sk;
int ret;
struct net *net = dev_net(skb->dev);
@@ -2028,8 +2028,8 @@
struct sock *sk, struct request_sock *req, int i, int uid)
{
int ttd = req->expires - jiffies;
- struct in6_addr *src = &inet6_rsk(req)->loc_addr;
- struct in6_addr *dest = &inet6_rsk(req)->rmt_addr;
+ const struct in6_addr *src = &inet6_rsk(req)->loc_addr;
+ const struct in6_addr *dest = &inet6_rsk(req)->rmt_addr;
if (ttd < 0)
ttd = 0;
@@ -2057,7 +2057,7 @@
static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i)
{
- struct in6_addr *dest, *src;
+ const struct in6_addr *dest, *src;
__u16 destp, srcp;
int timer_active;
unsigned long timer_expires;
@@ -2114,7 +2114,7 @@
static void get_timewait6_sock(struct seq_file *seq,
struct inet_timewait_sock *tw, int i)
{
- struct in6_addr *dest, *src;
+ const struct in6_addr *dest, *src;
__u16 destp, srcp;
struct inet6_timewait_sock *tw6 = inet6_twsk((struct sock *)tw);
int ttd = tw->tw_ttd - jiffies;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 15c3774..fc0c42a 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -311,7 +311,7 @@
struct udp_table *udptable)
{
struct sock *sk;
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
if (unlikely(sk = skb_steal_sock(skb)))
return sk;
@@ -463,9 +463,9 @@
struct udp_table *udptable)
{
struct ipv6_pinfo *np;
- struct ipv6hdr *hdr = (struct ipv6hdr*)skb->data;
- struct in6_addr *saddr = &hdr->saddr;
- struct in6_addr *daddr = &hdr->daddr;
+ const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
+ const struct in6_addr *saddr = &hdr->saddr;
+ const struct in6_addr *daddr = &hdr->daddr;
struct udphdr *uh = (struct udphdr*)(skb->data+offset);
struct sock *sk;
int err;
@@ -553,8 +553,8 @@
}
static struct sock *udp_v6_mcast_next(struct net *net, struct sock *sk,
- __be16 loc_port, struct in6_addr *loc_addr,
- __be16 rmt_port, struct in6_addr *rmt_addr,
+ __be16 loc_port, const struct in6_addr *loc_addr,
+ __be16 rmt_port, const struct in6_addr *rmt_addr,
int dif)
{
struct hlist_nulls_node *node;
@@ -633,7 +633,7 @@
* so we don't need to lock the hashes.
*/
static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
- struct in6_addr *saddr, struct in6_addr *daddr,
+ const struct in6_addr *saddr, const struct in6_addr *daddr,
struct udp_table *udptable)
{
struct sock *sk, *stack[256 / sizeof(struct sock *)];
@@ -716,7 +716,7 @@
struct net *net = dev_net(skb->dev);
struct sock *sk;
struct udphdr *uh;
- struct in6_addr *saddr, *daddr;
+ const struct in6_addr *saddr, *daddr;
u32 ulen = 0;
if (!pskb_may_pull(skb, sizeof(struct udphdr)))
@@ -1278,7 +1278,7 @@
static int udp6_ufo_send_check(struct sk_buff *skb)
{
- struct ipv6hdr *ipv6h;
+ const struct ipv6hdr *ipv6h;
struct udphdr *uh;
if (!pskb_may_pull(skb, sizeof(*uh)))
@@ -1328,14 +1328,14 @@
/* Do software UFO. Complete and fill in the UDP checksum as HW cannot
* do checksum of UDP packets sent as multiple IP fragments.
*/
- offset = skb->csum_start - skb_headroom(skb);
+ offset = skb_checksum_start_offset(skb);
csum = skb_checksum(skb, offset, skb->len- offset, 0);
offset += skb->csum_offset;
*(__sum16 *)(skb->data + offset) = csum_fold(csum);
skb->ip_summed = CHECKSUM_NONE;
/* Check if there is enough headroom to insert fragment header. */
- if ((skb_headroom(skb) < frag_hdr_sz) &&
+ if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) &&
pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
goto out;
@@ -1382,7 +1382,7 @@
{
struct inet_sock *inet = inet_sk(sp);
struct ipv6_pinfo *np = inet6_sk(sp);
- struct in6_addr *dest, *src;
+ const struct in6_addr *dest, *src;
__u16 destp, srcp;
dest = &np->daddr;
diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c
index bbd48b1..3437d7d 100644
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -41,10 +41,8 @@
{
struct ipv6hdr *top_iph;
struct ip_beet_phdr *ph;
- struct iphdr *iphv4;
int optlen, hdr_len;
- iphv4 = ip_hdr(skb);
hdr_len = 0;
optlen = XFRM_MODE_SKB_CB(skb)->optlen;
if (unlikely(optlen))
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index 645cb96..4d6edff 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -20,7 +20,7 @@
static inline void ipip6_ecn_decapsulate(struct sk_buff *skb)
{
- struct ipv6hdr *outer_iph = ipv6_hdr(skb);
+ const struct ipv6hdr *outer_iph = ipv6_hdr(skb);
struct ipv6hdr *inner_iph = ipipv6_hdr(skb);
if (INET_ECN_is_ce(ipv6_get_dsfield(outer_iph)))
@@ -55,8 +55,8 @@
dsfield &= ~INET_ECN_MASK;
ipv6_change_dsfield(top_iph, 0, dsfield);
top_iph->hop_limit = ip6_dst_hoplimit(dst->child);
- ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr);
- ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr);
+ ipv6_addr_copy(&top_iph->saddr, (const struct in6_addr *)&x->props.saddr);
+ ipv6_addr_copy(&top_iph->daddr, (const struct in6_addr *)&x->id.daddr);
return 0;
}
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 8e688b3..49a91c5f 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -79,7 +79,7 @@
}
EXPORT_SYMBOL(xfrm6_prepare_output);
-static int xfrm6_output_finish(struct sk_buff *skb)
+int xfrm6_output_finish(struct sk_buff *skb)
{
#ifdef CONFIG_NETFILTER
IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
@@ -97,9 +97,9 @@
if ((x && x->props.mode == XFRM_MODE_TUNNEL) &&
((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
dst_allfrag(skb_dst(skb)))) {
- return ip6_fragment(skb, xfrm6_output_finish);
+ return ip6_fragment(skb, x->outer_mode->afinfo->output_finish);
}
- return xfrm6_output_finish(skb);
+ return x->outer_mode->afinfo->output_finish(skb);
}
int xfrm6_output(struct sk_buff *skb)
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 05e34c8..d879f7e 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -124,7 +124,7 @@
struct flowi6 *fl6 = &fl->u.ip6;
int onlyproto = 0;
u16 offset = skb_network_header_len(skb);
- struct ipv6hdr *hdr = ipv6_hdr(skb);
+ const struct ipv6hdr *hdr = ipv6_hdr(skb);
struct ipv6_opt_hdr *exthdr;
const unsigned char *nh = skb_network_header(skb);
u8 nexthdr = nh[IP6CB(skb)->nhoff];
diff --git a/net/ipv6/xfrm6_state.c b/net/ipv6/xfrm6_state.c
index afe941e..248f0b2 100644
--- a/net/ipv6/xfrm6_state.c
+++ b/net/ipv6/xfrm6_state.c
@@ -178,6 +178,7 @@
.tmpl_sort = __xfrm6_tmpl_sort,
.state_sort = __xfrm6_state_sort,
.output = xfrm6_output,
+ .output_finish = xfrm6_output_finish,
.extract_input = xfrm6_extract_input,
.extract_output = xfrm6_extract_output,
.transport_finish = xfrm6_transport_finish,
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 2969cad..a6770a0 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -68,7 +68,7 @@
static struct kmem_cache *xfrm6_tunnel_spi_kmem __read_mostly;
-static inline unsigned xfrm6_tunnel_spi_hash_byaddr(xfrm_address_t *addr)
+static inline unsigned xfrm6_tunnel_spi_hash_byaddr(const xfrm_address_t *addr)
{
unsigned h;
@@ -85,7 +85,7 @@
return spi % XFRM6_TUNNEL_SPI_BYSPI_HSIZE;
}
-static struct xfrm6_tunnel_spi *__xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr)
+static struct xfrm6_tunnel_spi *__xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr)
{
struct xfrm6_tunnel_net *xfrm6_tn = xfrm6_tunnel_pernet(net);
struct xfrm6_tunnel_spi *x6spi;
@@ -101,7 +101,7 @@
return NULL;
}
-__be32 xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr)
+__be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr)
{
struct xfrm6_tunnel_spi *x6spi;
u32 spi;
@@ -237,10 +237,10 @@
static int xfrm6_tunnel_rcv(struct sk_buff *skb)
{
struct net *net = dev_net(skb->dev);
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
__be32 spi;
- spi = xfrm6_tunnel_spi_lookup(net, (xfrm_address_t *)&iph->saddr);
+ spi = xfrm6_tunnel_spi_lookup(net, (const xfrm_address_t *)&iph->saddr);
return xfrm6_rcv_spi(skb, IPPROTO_IPV6, spi) > 0 ? : 0;
}
diff --git a/net/irda/ircomm/ircomm_core.c b/net/irda/ircomm/ircomm_core.c
index e970820..52079f1 100644
--- a/net/irda/ircomm/ircomm_core.c
+++ b/net/irda/ircomm/ircomm_core.c
@@ -244,14 +244,8 @@
void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb,
struct ircomm_info *info)
{
- int clen = 0;
-
IRDA_DEBUG(2, "%s()\n", __func__ );
- /* Check if the packet contains data on the control channel */
- if (skb->len > 0)
- clen = skb->data[0];
-
/*
* If there are any data hiding in the control channel, we must
* deliver it first. The side effect is that the control channel
diff --git a/net/irda/ircomm/ircomm_lmp.c b/net/irda/ircomm/ircomm_lmp.c
index 08fb54d..3b8095c 100644
--- a/net/irda/ircomm/ircomm_lmp.c
+++ b/net/irda/ircomm/ircomm_lmp.c
@@ -75,7 +75,6 @@
struct sk_buff *userdata)
{
struct sk_buff *tx_skb;
- int ret;
IRDA_DEBUG(0, "%s()\n", __func__ );
@@ -100,9 +99,7 @@
tx_skb = userdata;
}
- ret = irlmp_connect_response(self->lsap, tx_skb);
-
- return 0;
+ return irlmp_connect_response(self->lsap, tx_skb);
}
static int ircomm_lmp_disconnect_request(struct ircomm_cb *self,
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index a39cca8..b3cc8b3 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -38,6 +38,7 @@
#include <linux/seq_file.h>
#include <linux/termios.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/interrupt.h>
#include <linux/device.h> /* for MODULE_ALIAS_CHARDEV_MAJOR */
@@ -1132,7 +1133,6 @@
struct sk_buff *skb)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
- struct tty_ldisc *ld;
IRDA_DEBUG(2, "%s()\n", __func__ );
@@ -1161,15 +1161,11 @@
}
/*
- * Just give it over to the line discipline. There is no need to
- * involve the flip buffers, since we are not running in an interrupt
- * handler
+ * Use flip buffer functions since the code may be called from interrupt
+ * context
*/
-
- ld = tty_ldisc_ref(self->tty);
- if (ld)
- ld->ops->receive_buf(self->tty, skb->data, NULL, skb->len);
- tty_ldisc_deref(ld);
+ tty_insert_flip_string(self->tty, skb->data, skb->len);
+ tty_flip_buffer_push(self->tty);
/* No need to kfree_skb - see ircomm_ttp_data_indication() */
diff --git a/net/irda/irlan/irlan_filter.c b/net/irda/irlan/irlan_filter.c
index 9ff7823..7977be7 100644
--- a/net/irda/irlan/irlan_filter.c
+++ b/net/irda/irlan/irlan_filter.c
@@ -143,12 +143,8 @@
*/
void irlan_check_command_param(struct irlan_cb *self, char *param, char *value)
{
- __u8 *bytes;
-
IRDA_DEBUG(4, "%s()\n", __func__ );
- bytes = value;
-
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
diff --git a/net/irda/irlan/irlan_provider.c b/net/irda/irlan/irlan_provider.c
index 5cf5e6c..b8af74a 100644
--- a/net/irda/irlan/irlan_provider.c
+++ b/net/irda/irlan/irlan_provider.c
@@ -128,7 +128,6 @@
{
struct irlan_cb *self;
struct tsap_cb *tsap;
- __u32 saddr, daddr;
IRDA_DEBUG(0, "%s()\n", __func__ );
@@ -141,8 +140,6 @@
IRDA_ASSERT(tsap == self->provider.tsap_ctrl,return;);
IRDA_ASSERT(self->provider.state == IRLAN_IDLE, return;);
- daddr = irttp_get_daddr(tsap);
- saddr = irttp_get_saddr(tsap);
self->provider.max_sdu_size = max_sdu_size;
self->provider.max_header_size = max_header_size;
diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
index bb47021..ccd214f 100644
--- a/net/irda/irlap_event.c
+++ b/net/irda/irlap_event.c
@@ -2227,8 +2227,6 @@
static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
- int ret = 0;
-
IRDA_DEBUG(1, "%s()\n", __func__);
IRDA_ASSERT(self != NULL, return -ENODEV;);
@@ -2289,7 +2287,6 @@
IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __func__,
event, irlap_event[event]);
- ret = -EINVAL;
break;
}
diff --git a/net/irda/irproc.c b/net/irda/irproc.c
index 318766e..b9ac598 100644
--- a/net/irda/irproc.c
+++ b/net/irda/irproc.c
@@ -65,15 +65,14 @@
void __init irda_proc_register(void)
{
int i;
- struct proc_dir_entry *d;
proc_irda = proc_mkdir("irda", init_net.proc_net);
if (proc_irda == NULL)
return;
for (i = 0; i < ARRAY_SIZE(irda_dirs); i++)
- d = proc_create(irda_dirs[i].name, 0, proc_irda,
- irda_dirs[i].fops);
+ (void) proc_create(irda_dirs[i].name, 0, proc_irda,
+ irda_dirs[i].fops);
}
/*
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 986b2a5..e2013e4 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -190,7 +190,6 @@
*/
static int afiucv_pm_restore_thaw(struct device *dev)
{
- struct iucv_sock *iucv;
struct sock *sk;
struct hlist_node *node;
@@ -199,7 +198,6 @@
#endif
read_lock(&iucv_sk_list.lock);
sk_for_each(sk, node, &iucv_sk_list.head) {
- iucv = iucv_sk(sk);
switch (sk->sk_state) {
case IUCV_CONNECTED:
sk->sk_err = EPIPE;
@@ -381,7 +379,6 @@
{
unsigned char user_data[16];
struct iucv_sock *iucv = iucv_sk(sk);
- int err;
unsigned long timeo;
iucv_sock_clear_timer(sk);
@@ -394,8 +391,6 @@
case IUCV_CONNECTED:
case IUCV_DISCONN:
- err = 0;
-
sk->sk_state = IUCV_CLOSING;
sk->sk_state_change(sk);
@@ -404,7 +399,7 @@
timeo = sk->sk_lingertime;
else
timeo = IUCV_DISCONN_TIMEOUT;
- err = iucv_sock_wait(sk,
+ iucv_sock_wait(sk,
iucv_sock_in_state(sk, IUCV_CLOSED, 0),
timeo);
}
@@ -417,7 +412,7 @@
low_nmcpy(user_data, iucv->src_name);
high_nmcpy(user_data, iucv->dst_name);
ASCEBC(user_data, sizeof(user_data));
- err = iucv_path_sever(iucv->path, user_data);
+ iucv_path_sever(iucv->path, user_data);
iucv_path_free(iucv->path);
iucv->path = NULL;
}
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 8f156bd..a15c015 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -128,8 +128,8 @@
};
static struct iucv_irq_data *iucv_irq_data[NR_CPUS];
-static cpumask_t iucv_buffer_cpumask = CPU_MASK_NONE;
-static cpumask_t iucv_irq_cpumask = CPU_MASK_NONE;
+static cpumask_t iucv_buffer_cpumask = { CPU_BITS_NONE };
+static cpumask_t iucv_irq_cpumask = { CPU_BITS_NONE };
/*
* Queue of interrupt buffers lock for delivery via the tasklet
@@ -406,7 +406,7 @@
parm->set_mask.ipmask = 0xf8;
iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
/* Set indication that iucv interrupts are allowed for this cpu. */
- cpu_set(cpu, iucv_irq_cpumask);
+ cpumask_set_cpu(cpu, &iucv_irq_cpumask);
}
/**
@@ -426,7 +426,7 @@
iucv_call_b2f0(IUCV_SETMASK, parm);
/* Clear indication that iucv interrupts are allowed for this cpu. */
- cpu_clear(cpu, iucv_irq_cpumask);
+ cpumask_clear_cpu(cpu, &iucv_irq_cpumask);
}
/**
@@ -451,7 +451,7 @@
iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
/* Clear indication that iucv interrupts are allowed for this cpu. */
- cpu_clear(cpu, iucv_irq_cpumask);
+ cpumask_clear_cpu(cpu, &iucv_irq_cpumask);
}
/**
@@ -466,7 +466,7 @@
union iucv_param *parm;
int rc;
- if (cpu_isset(cpu, iucv_buffer_cpumask))
+ if (cpumask_test_cpu(cpu, &iucv_buffer_cpumask))
return;
/* Declare interrupt buffer. */
@@ -499,9 +499,9 @@
}
/* Set indication that an iucv buffer exists for this cpu. */
- cpu_set(cpu, iucv_buffer_cpumask);
+ cpumask_set_cpu(cpu, &iucv_buffer_cpumask);
- if (iucv_nonsmp_handler == 0 || cpus_empty(iucv_irq_cpumask))
+ if (iucv_nonsmp_handler == 0 || cpumask_empty(&iucv_irq_cpumask))
/* Enable iucv interrupts on this cpu. */
iucv_allow_cpu(NULL);
else
@@ -520,7 +520,7 @@
int cpu = smp_processor_id();
union iucv_param *parm;
- if (!cpu_isset(cpu, iucv_buffer_cpumask))
+ if (!cpumask_test_cpu(cpu, &iucv_buffer_cpumask))
return;
/* Block iucv interrupts. */
@@ -531,7 +531,7 @@
iucv_call_b2f0(IUCV_RETRIEVE_BUFFER, parm);
/* Clear indication that an iucv buffer exists for this cpu. */
- cpu_clear(cpu, iucv_buffer_cpumask);
+ cpumask_clear_cpu(cpu, &iucv_buffer_cpumask);
}
/**
@@ -546,8 +546,8 @@
get_online_cpus();
for_each_online_cpu(cpu)
/* Enable all cpus with a declared buffer. */
- if (cpu_isset(cpu, iucv_buffer_cpumask) &&
- !cpu_isset(cpu, iucv_irq_cpumask))
+ if (cpumask_test_cpu(cpu, &iucv_buffer_cpumask) &&
+ !cpumask_test_cpu(cpu, &iucv_irq_cpumask))
smp_call_function_single(cpu, iucv_allow_cpu,
NULL, 1);
put_online_cpus();
@@ -564,9 +564,9 @@
int cpu;
/* Disable all cpu but the first in cpu_irq_cpumask. */
- cpumask = iucv_irq_cpumask;
- cpu_clear(first_cpu(iucv_irq_cpumask), cpumask);
- for_each_cpu_mask_nr(cpu, cpumask)
+ cpumask_copy(&cpumask, &iucv_irq_cpumask);
+ cpumask_clear_cpu(cpumask_first(&iucv_irq_cpumask), &cpumask);
+ for_each_cpu(cpu, &cpumask)
smp_call_function_single(cpu, iucv_block_cpu, NULL, 1);
}
@@ -593,7 +593,7 @@
rc = -EIO;
for_each_online_cpu(cpu)
smp_call_function_single(cpu, iucv_declare_cpu, NULL, 1);
- if (cpus_empty(iucv_buffer_cpumask))
+ if (cpumask_empty(&iucv_buffer_cpumask))
/* No cpu could declare an iucv buffer. */
goto out;
put_online_cpus();
@@ -675,15 +675,16 @@
case CPU_DOWN_PREPARE_FROZEN:
if (!iucv_path_table)
break;
- cpumask = iucv_buffer_cpumask;
- cpu_clear(cpu, cpumask);
- if (cpus_empty(cpumask))
+ cpumask_copy(&cpumask, &iucv_buffer_cpumask);
+ cpumask_clear_cpu(cpu, &cpumask);
+ if (cpumask_empty(&cpumask))
/* Can't offline last IUCV enabled cpu. */
return notifier_from_errno(-EINVAL);
smp_call_function_single(cpu, iucv_retrieve_cpu, NULL, 1);
- if (cpus_empty(iucv_irq_cpumask))
- smp_call_function_single(first_cpu(iucv_buffer_cpumask),
- iucv_allow_cpu, NULL, 1);
+ if (cpumask_empty(&iucv_irq_cpumask))
+ smp_call_function_single(
+ cpumask_first(&iucv_buffer_cpumask),
+ iucv_allow_cpu, NULL, 1);
break;
}
return NOTIFY_OK;
@@ -828,14 +829,14 @@
static int iucv_reboot_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
- int i, rc;
+ int i;
get_online_cpus();
on_each_cpu(iucv_block_cpu, NULL, 1);
preempt_disable();
for (i = 0; i < iucv_max_pathid; i++) {
if (iucv_path_table[i])
- rc = iucv_sever_pathid(i, NULL);
+ iucv_sever_pathid(i, NULL);
}
preempt_enable();
put_online_cpus();
@@ -866,7 +867,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -915,7 +916,7 @@
spin_lock_bh(&iucv_table_lock);
iucv_cleanup_queue();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -975,7 +976,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1007,7 +1008,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1036,7 +1037,7 @@
int rc;
preempt_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1070,7 +1071,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1162,7 +1163,7 @@
if (msg->flags & IUCV_IPRMDATA)
return iucv_message_receive_iprmdata(path, msg, flags,
buffer, size, residual);
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1235,7 +1236,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1274,7 +1275,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1324,7 +1325,7 @@
union iucv_param *parm;
int rc;
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1411,7 +1412,7 @@
int rc;
local_bh_disable();
- if (cpus_empty(iucv_buffer_cpumask)) {
+ if (cpumask_empty(&iucv_buffer_cpumask)) {
rc = -EIO;
goto out;
}
@@ -1888,7 +1889,7 @@
printk(KERN_WARNING "iucv_pm_freeze\n");
#endif
if (iucv_pm_state != IUCV_PM_FREEZING) {
- for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
+ for_each_cpu(cpu, &iucv_irq_cpumask)
smp_call_function_single(cpu, iucv_block_cpu_almost,
NULL, 1);
cancel_work_sync(&iucv_work);
@@ -1928,7 +1929,7 @@
if (rc)
goto out;
}
- if (cpus_empty(iucv_irq_cpumask)) {
+ if (cpumask_empty(&iucv_irq_cpumask)) {
if (iucv_nonsmp_handler)
/* enable interrupts on one cpu */
iucv_allow_cpu(NULL);
@@ -1961,7 +1962,7 @@
pr_warning("Suspending Linux did not completely close all IUCV "
"connections\n");
iucv_pm_state = IUCV_PM_RESTORING;
- if (cpus_empty(iucv_irq_cpumask)) {
+ if (cpumask_empty(&iucv_irq_cpumask)) {
rc = iucv_query_maxconn();
rc = iucv_enable();
if (rc)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 7db86ff..d62401c 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -712,7 +712,7 @@
sin6->sin6_family = AF_INET6;
sin6->sin6_port = port;
sin6->sin6_flowinfo = 0;
- ipv6_addr_copy(&sin6->sin6_addr, (struct in6_addr *)xaddr->a6);
+ ipv6_addr_copy(&sin6->sin6_addr, (const struct in6_addr *)xaddr->a6);
sin6->sin6_scope_id = 0;
return 128;
}
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index c64ce0a..ed8a233 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -954,7 +954,7 @@
}
static int l2tp_xmit_core(struct l2tp_session *session, struct sk_buff *skb,
- size_t data_len)
+ struct flowi *fl, size_t data_len)
{
struct l2tp_tunnel *tunnel = session->tunnel;
unsigned int len = skb->len;
@@ -987,7 +987,7 @@
/* Queue the packet to IP for output */
skb->local_df = 1;
- error = ip_queue_xmit(skb);
+ error = ip_queue_xmit(skb, fl);
/* Update stats */
if (error >= 0) {
@@ -1028,6 +1028,7 @@
int data_len = skb->len;
struct l2tp_tunnel *tunnel = session->tunnel;
struct sock *sk = tunnel->sock;
+ struct flowi *fl;
struct udphdr *uh;
struct inet_sock *inet;
__wsum csum;
@@ -1060,14 +1061,21 @@
IPSKB_REROUTED);
nf_reset(skb);
+ bh_lock_sock(sk);
+ if (sock_owned_by_user(sk)) {
+ dev_kfree_skb(skb);
+ goto out_unlock;
+ }
+
/* Get routing info from the tunnel socket */
skb_dst_drop(skb);
skb_dst_set(skb, dst_clone(__sk_dst_get(sk)));
+ inet = inet_sk(sk);
+ fl = &inet->cork.fl;
switch (tunnel->encap) {
case L2TP_ENCAPTYPE_UDP:
/* Setup UDP header */
- inet = inet_sk(sk);
__skb_push(skb, sizeof(*uh));
skb_reset_transport_header(skb);
uh = udp_hdr(skb);
@@ -1105,7 +1113,9 @@
l2tp_skb_set_owner_w(skb, sk);
- l2tp_xmit_core(session, skb, data_len);
+ l2tp_xmit_core(session, skb, fl, data_len);
+out_unlock:
+ bh_unlock_sock(sk);
abort:
return 0;
@@ -1425,16 +1435,15 @@
/* Add tunnel to our list */
INIT_LIST_HEAD(&tunnel->list);
- spin_lock_bh(&pn->l2tp_tunnel_list_lock);
- list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list);
- spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
- synchronize_rcu();
atomic_inc(&l2tp_tunnel_count);
/* Bump the reference count. The tunnel context is deleted
- * only when this drops to zero.
+ * only when this drops to zero. Must be done before list insertion
*/
l2tp_tunnel_inc_refcount(tunnel);
+ spin_lock_bh(&pn->l2tp_tunnel_list_lock);
+ list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list);
+ spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
err = 0;
err:
@@ -1626,7 +1635,6 @@
hlist_add_head_rcu(&session->global_hlist,
l2tp_session_id_hash_2(pn, session_id));
spin_unlock_bh(&pn->l2tp_session_hlist_lock);
- synchronize_rcu();
}
/* Ignore management session in session count value */
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 5c04f3e..b6466e7 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -296,12 +296,12 @@
static int l2tp_ip_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
- int rc;
- struct inet_sock *inet = inet_sk(sk);
struct sockaddr_l2tpip *lsa = (struct sockaddr_l2tpip *) uaddr;
+ struct inet_sock *inet = inet_sk(sk);
+ struct flowi4 *fl4;
struct rtable *rt;
__be32 saddr;
- int oif;
+ int oif, rc;
rc = -EINVAL;
if (addr_len < sizeof(*lsa))
@@ -311,6 +311,8 @@
if (lsa->l2tp_family != AF_INET)
goto out;
+ lock_sock(sk);
+
sk_dst_reset(sk);
oif = sk->sk_bound_dev_if;
@@ -320,7 +322,8 @@
if (ipv4_is_multicast(lsa->l2tp_addr.s_addr))
goto out;
- rt = ip_route_connect(lsa->l2tp_addr.s_addr, saddr,
+ fl4 = &inet->cork.fl.u.ip4;
+ rt = ip_route_connect(fl4, lsa->l2tp_addr.s_addr, saddr,
RT_CONN_FLAGS(sk), oif,
IPPROTO_L2TP,
0, 0, sk, true);
@@ -340,10 +343,10 @@
l2tp_ip_sk(sk)->peer_conn_id = lsa->l2tp_conn_id;
if (!inet->inet_saddr)
- inet->inet_saddr = rt->rt_src;
+ inet->inet_saddr = fl4->saddr;
if (!inet->inet_rcv_saddr)
- inet->inet_rcv_saddr = rt->rt_src;
- inet->inet_daddr = rt->rt_dst;
+ inet->inet_rcv_saddr = fl4->saddr;
+ inet->inet_daddr = fl4->daddr;
sk->sk_state = TCP_ESTABLISHED;
inet->inet_id = jiffies;
@@ -356,6 +359,7 @@
rc = 0;
out:
+ release_sock(sk);
return rc;
}
@@ -416,23 +420,28 @@
int rc;
struct l2tp_ip_sock *lsa = l2tp_ip_sk(sk);
struct inet_sock *inet = inet_sk(sk);
- struct ip_options *opt = inet->opt;
struct rtable *rt = NULL;
+ struct flowi4 *fl4;
int connected = 0;
__be32 daddr;
+ lock_sock(sk);
+
+ rc = -ENOTCONN;
if (sock_flag(sk, SOCK_DEAD))
- return -ENOTCONN;
+ goto out;
/* Get and verify the address. */
if (msg->msg_name) {
struct sockaddr_l2tpip *lip = (struct sockaddr_l2tpip *) msg->msg_name;
+ rc = -EINVAL;
if (msg->msg_namelen < sizeof(*lip))
- return -EINVAL;
+ goto out;
if (lip->l2tp_family != AF_INET) {
+ rc = -EAFNOSUPPORT;
if (lip->l2tp_family != AF_UNSPEC)
- return -EAFNOSUPPORT;
+ goto out;
}
daddr = lip->l2tp_addr.s_addr;
@@ -467,19 +476,27 @@
goto error;
}
+ fl4 = &inet->cork.fl.u.ip4;
if (connected)
rt = (struct rtable *) __sk_dst_check(sk, 0);
if (rt == NULL) {
+ struct ip_options_rcu *inet_opt;
+
+ rcu_read_lock();
+ inet_opt = rcu_dereference(inet->inet_opt);
+
/* Use correct destination address if we have options. */
- if (opt && opt->srr)
- daddr = opt->faddr;
+ if (inet_opt && inet_opt->opt.srr)
+ daddr = inet_opt->opt.faddr;
+
+ rcu_read_unlock();
/* If this fails, retransmit mechanism of transport layer will
* keep trying until route appears or the connection times
* itself out.
*/
- rt = ip_route_output_ports(sock_net(sk), sk,
+ rt = ip_route_output_ports(sock_net(sk), fl4, sk,
daddr, inet->inet_saddr,
inet->inet_dport, inet->inet_sport,
sk->sk_protocol, RT_CONN_FLAGS(sk),
@@ -491,7 +508,7 @@
skb_dst_set(skb, dst_clone(&rt->dst));
/* Queue the packet to IP for output */
- rc = ip_queue_xmit(skb);
+ rc = ip_queue_xmit(skb, &inet->cork.fl);
error:
/* Update stats */
@@ -503,12 +520,15 @@
lsa->tx_errors++;
}
+out:
+ release_sock(sk);
return rc;
no_route:
IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
kfree_skb(skb);
- return -EHOSTUNREACH;
+ rc = -EHOSTUNREACH;
+ goto out;
}
static int l2tp_ip_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c
index 4c1e540..93a41a0 100644
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -795,11 +795,12 @@
goto out;
l2tp_nl_cmd_ops[pw_type] = ops;
+ ret = 0;
out:
genl_unlock();
err:
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(l2tp_nl_register_ops);
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 513f85c..f5fdfcbf 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -2,7 +2,6 @@
tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
depends on CFG80211
select CRYPTO
- select CRYPTO_ECB
select CRYPTO_ARC4
select CRYPTO_AES
select CRC32
diff --git a/net/mac80211/aes_ccm.c b/net/mac80211/aes_ccm.c
index 4bd6ef0..b9b595c 100644
--- a/net/mac80211/aes_ccm.c
+++ b/net/mac80211/aes_ccm.c
@@ -54,13 +54,12 @@
u8 *cdata, u8 *mic)
{
int i, j, last_len, num_blocks;
- u8 *pos, *cpos, *b, *s_0, *e, *b_0, *aad;
+ u8 *pos, *cpos, *b, *s_0, *e, *b_0;
b = scratch;
s_0 = scratch + AES_BLOCK_LEN;
e = scratch + 2 * AES_BLOCK_LEN;
b_0 = scratch + 3 * AES_BLOCK_LEN;
- aad = scratch + 4 * AES_BLOCK_LEN;
num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_LEN);
last_len = data_len % AES_BLOCK_LEN;
@@ -94,13 +93,12 @@
u8 *cdata, size_t data_len, u8 *mic, u8 *data)
{
int i, j, last_len, num_blocks;
- u8 *pos, *cpos, *b, *s_0, *a, *b_0, *aad;
+ u8 *pos, *cpos, *b, *s_0, *a, *b_0;
b = scratch;
s_0 = scratch + AES_BLOCK_LEN;
a = scratch + 2 * AES_BLOCK_LEN;
b_0 = scratch + 3 * AES_BLOCK_LEN;
- aad = scratch + 4 * AES_BLOCK_LEN;
num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_LEN);
last_len = data_len % AES_BLOCK_LEN;
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 0c9d0c0..9c0d76c 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -63,7 +63,8 @@
lockdep_assert_held(&sta->ampdu_mlme.mtx);
- tid_rx = sta->ampdu_mlme.tid_rx[tid];
+ tid_rx = rcu_dereference_protected(sta->ampdu_mlme.tid_rx[tid],
+ lockdep_is_held(&sta->ampdu_mlme.mtx));
if (!tid_rx)
return;
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 63d852c..c8be8ef 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -136,12 +136,12 @@
ieee80211_tx_skb(sdata, skb);
}
-static void kfree_tid_tx(struct rcu_head *rcu_head)
+void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
+ struct tid_ampdu_tx *tid_tx)
{
- struct tid_ampdu_tx *tid_tx =
- container_of(rcu_head, struct tid_ampdu_tx, rcu_head);
-
- kfree(tid_tx);
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
+ lockdep_assert_held(&sta->lock);
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
}
int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
@@ -149,21 +149,24 @@
bool tx)
{
struct ieee80211_local *local = sta->local;
- struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ struct tid_ampdu_tx *tid_tx;
int ret;
lockdep_assert_held(&sta->ampdu_mlme.mtx);
- if (!tid_tx)
- return -ENOENT;
-
spin_lock_bh(&sta->lock);
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+ if (!tid_tx) {
+ spin_unlock_bh(&sta->lock);
+ return -ENOENT;
+ }
+
if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
/* not even started yet! */
- rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ ieee80211_assign_tid_tx(sta, tid, NULL);
spin_unlock_bh(&sta->lock);
- call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ kfree_rcu(tid_tx, rcu_head);
return 0;
}
@@ -283,13 +286,13 @@
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
{
- struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ struct tid_ampdu_tx *tid_tx;
struct ieee80211_local *local = sta->local;
struct ieee80211_sub_if_data *sdata = sta->sdata;
u16 start_seq_num;
int ret;
- lockdep_assert_held(&sta->ampdu_mlme.mtx);
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
/*
* While we're asking the driver about the aggregation,
@@ -318,11 +321,11 @@
" tid %d\n", tid);
#endif
spin_lock_bh(&sta->lock);
- rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ ieee80211_assign_tid_tx(sta, tid, NULL);
spin_unlock_bh(&sta->lock);
ieee80211_wake_queue_agg(local, tid);
- call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ kfree_rcu(tid_tx, rcu_head);
return;
}
@@ -396,9 +399,9 @@
goto err_unlock_sta;
}
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
/* check if the TID is not in aggregation flow already */
- if (tid_tx) {
+ if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "BA request denied - session is not "
"idle on tid %u\n", tid);
@@ -433,8 +436,11 @@
sta->ampdu_mlme.dialog_token_allocator++;
tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
- /* finally, assign it to the array */
- rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
+ /*
+ * Finally, assign it to the start array; the work item will
+ * collect it and move it to the normal array.
+ */
+ sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
@@ -480,16 +486,19 @@
static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
struct sta_info *sta, u16 tid)
{
+ struct tid_ampdu_tx *tid_tx;
+
lockdep_assert_held(&sta->ampdu_mlme.mtx);
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Aggregation is on for tid %d\n", tid);
#endif
drv_ampdu_action(local, sta->sdata,
IEEE80211_AMPDU_TX_OPERATIONAL,
- &sta->sta, tid, NULL,
- sta->ampdu_mlme.tid_tx[tid]->buf_size);
+ &sta->sta, tid, NULL, tid_tx->buf_size);
/*
* synchronize with TX path, while splicing the TX path
@@ -497,13 +506,13 @@
*/
spin_lock_bh(&sta->lock);
- ieee80211_agg_splice_packets(local, sta->ampdu_mlme.tid_tx[tid], tid);
+ ieee80211_agg_splice_packets(local, tid_tx, tid);
/*
* Now mark as operational. This will be visible
* in the TX path, and lets it go lock-free in
* the common case.
*/
- set_bit(HT_AGG_STATE_OPERATIONAL, &sta->ampdu_mlme.tid_tx[tid]->state);
+ set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
ieee80211_agg_splice_finish(local, tid);
spin_unlock_bh(&sta->lock);
@@ -537,7 +546,7 @@
}
mutex_lock(&sta->ampdu_mlme.mtx);
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
if (WARN_ON(!tid_tx)) {
#ifdef CONFIG_MAC80211_HT_DEBUG
@@ -615,7 +624,7 @@
return -EINVAL;
spin_lock_bh(&sta->lock);
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
if (!tid_tx) {
ret = -ENOENT;
@@ -671,7 +680,7 @@
mutex_lock(&sta->ampdu_mlme.mtx);
spin_lock_bh(&sta->lock);
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
#ifdef CONFIG_MAC80211_HT_DEBUG
@@ -697,11 +706,11 @@
ieee80211_agg_splice_packets(local, tid_tx, tid);
/* future packets must not find the tid_tx struct any more */
- rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ ieee80211_assign_tid_tx(sta, tid, NULL);
ieee80211_agg_splice_finish(local, tid);
- call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ kfree_rcu(tid_tx, rcu_head);
unlock_sta:
spin_unlock_bh(&sta->lock);
@@ -752,7 +761,7 @@
mutex_lock(&sta->ampdu_mlme.mtx);
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
if (!tid_tx)
goto out;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 3342135..be70c70 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -136,7 +136,10 @@
mutex_lock(&sdata->local->sta_mtx);
if (mac_addr) {
- sta = sta_info_get_bss(sdata, mac_addr);
+ if (ieee80211_vif_is_mesh(&sdata->vif))
+ sta = sta_info_get(sdata, mac_addr);
+ else
+ sta = sta_info_get_bss(sdata, mac_addr);
if (!sta) {
ieee80211_key_free(sdata->local, key);
err = -ENOENT;
@@ -157,13 +160,14 @@
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, bool pairwise, const u8 *mac_addr)
{
- struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
+ struct ieee80211_key *key = NULL;
int ret;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- mutex_lock(&sdata->local->sta_mtx);
+ mutex_lock(&local->sta_mtx);
+ mutex_lock(&local->key_mtx);
if (mac_addr) {
ret = -ENOENT;
@@ -172,33 +176,24 @@
if (!sta)
goto out_unlock;
- if (pairwise) {
- if (sta->ptk) {
- ieee80211_key_free(sdata->local, sta->ptk);
- ret = 0;
- }
- } else {
- if (sta->gtk[key_idx]) {
- ieee80211_key_free(sdata->local,
- sta->gtk[key_idx]);
- ret = 0;
- }
- }
+ if (pairwise)
+ key = key_mtx_dereference(local, sta->ptk);
+ else
+ key = key_mtx_dereference(local, sta->gtk[key_idx]);
+ } else
+ key = key_mtx_dereference(local, sdata->keys[key_idx]);
- goto out_unlock;
- }
-
- if (!sdata->keys[key_idx]) {
+ if (!key) {
ret = -ENOENT;
goto out_unlock;
}
- ieee80211_key_free(sdata->local, sdata->keys[key_idx]);
- WARN_ON(sdata->keys[key_idx]);
+ __ieee80211_key_free(key);
ret = 0;
out_unlock:
- mutex_unlock(&sdata->local->sta_mtx);
+ mutex_unlock(&local->key_mtx);
+ mutex_unlock(&local->sta_mtx);
return ret;
}
@@ -228,11 +223,11 @@
goto out;
if (pairwise)
- key = sta->ptk;
+ key = rcu_dereference(sta->ptk);
else if (key_idx < NUM_DEFAULT_KEYS)
- key = sta->gtk[key_idx];
+ key = rcu_dereference(sta->gtk[key_idx]);
} else
- key = sdata->keys[key_idx];
+ key = rcu_dereference(sdata->keys[key_idx]);
if (!key)
goto out;
@@ -330,6 +325,7 @@
static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct timespec uptime;
sinfo->generation = sdata->local->sta_generation;
@@ -342,7 +338,12 @@
STATION_INFO_TX_FAILED |
STATION_INFO_TX_BITRATE |
STATION_INFO_RX_BITRATE |
- STATION_INFO_RX_DROP_MISC;
+ STATION_INFO_RX_DROP_MISC |
+ STATION_INFO_BSS_PARAM |
+ STATION_INFO_CONNECTED_TIME;
+
+ do_posix_clock_monotonic_gettime(&uptime);
+ sinfo->connected_time = uptime.tv_sec - sta->last_connected;
sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
sinfo->rx_bytes = sta->rx_bytes;
@@ -389,6 +390,16 @@
sinfo->plink_state = sta->plink_state;
#endif
}
+
+ sinfo->bss_param.flags = 0;
+ if (sdata->vif.bss_conf.use_cts_prot)
+ sinfo->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
+ if (sdata->vif.bss_conf.use_short_preamble)
+ sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
+ if (sdata->vif.bss_conf.use_short_slot)
+ sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
+ sinfo->bss_param.dtim_period = sdata->local->hw.conf.ps_dtim_period;
+ sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int;
}
@@ -452,7 +463,7 @@
int size;
int err = -EINVAL;
- old = sdata->u.ap.beacon;
+ old = rtnl_dereference(sdata->u.ap.beacon);
/* head must not be zero-length */
if (params->head && !params->head_len)
@@ -547,8 +558,7 @@
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- old = sdata->u.ap.beacon;
-
+ old = rtnl_dereference(sdata->u.ap.beacon);
if (old)
return -EALREADY;
@@ -563,8 +573,7 @@
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- old = sdata->u.ap.beacon;
-
+ old = rtnl_dereference(sdata->u.ap.beacon);
if (!old)
return -ENOENT;
@@ -578,8 +587,7 @@
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- old = sdata->u.ap.beacon;
-
+ old = rtnl_dereference(sdata->u.ap.beacon);
if (!old)
return -ENOENT;
@@ -675,6 +683,12 @@
if (set & BIT(NL80211_STA_FLAG_MFP))
sta->flags |= WLAN_STA_MFP;
}
+
+ if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) {
+ sta->flags &= ~WLAN_STA_AUTH;
+ if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED))
+ sta->flags |= WLAN_STA_AUTH;
+ }
spin_unlock_irqrestore(&sta->flaglock, flags);
/*
@@ -712,15 +726,29 @@
params->ht_capa,
&sta->sta.ht_cap);
- if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
- switch (params->plink_action) {
- case PLINK_ACTION_OPEN:
- mesh_plink_open(sta);
- break;
- case PLINK_ACTION_BLOCK:
- mesh_plink_block(sta);
- break;
- }
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+#ifdef CONFIG_MAC80211_MESH
+ if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
+ switch (params->plink_state) {
+ case NL80211_PLINK_LISTEN:
+ case NL80211_PLINK_ESTAB:
+ case NL80211_PLINK_BLOCKED:
+ sta->plink_state = params->plink_state;
+ break;
+ default:
+ /* nothing */
+ break;
+ }
+ else
+ switch (params->plink_action) {
+ case PLINK_ACTION_OPEN:
+ mesh_plink_open(sta);
+ break;
+ case PLINK_ACTION_BLOCK:
+ mesh_plink_block(sta);
+ break;
+ }
+#endif
}
}
@@ -921,8 +949,10 @@
static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
struct mpath_info *pinfo)
{
- if (mpath->next_hop)
- memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
+ struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop);
+
+ if (next_hop_sta)
+ memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN);
else
memset(next_hop, 0, ETH_ALEN);
@@ -1023,26 +1053,30 @@
u8 *new_ie;
const u8 *old_ie;
- /* first allocate the new vendor information element */
+ /* allocate information elements */
new_ie = NULL;
- old_ie = ifmsh->vendor_ie;
+ old_ie = ifmsh->ie;
- ifmsh->vendor_ie_len = setup->vendor_ie_len;
- if (setup->vendor_ie_len) {
- new_ie = kmemdup(setup->vendor_ie, setup->vendor_ie_len,
+ if (setup->ie_len) {
+ new_ie = kmemdup(setup->ie, setup->ie_len,
GFP_KERNEL);
if (!new_ie)
return -ENOMEM;
}
+ ifmsh->ie_len = setup->ie_len;
+ ifmsh->ie = new_ie;
+ kfree(old_ie);
/* now copy the rest of the setup parameters */
ifmsh->mesh_id_len = setup->mesh_id_len;
memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
ifmsh->mesh_pp_id = setup->path_sel_proto;
ifmsh->mesh_pm_id = setup->path_metric;
- ifmsh->vendor_ie = new_ie;
-
- kfree(old_ie);
+ ifmsh->security = IEEE80211_MESH_SEC_NONE;
+ if (setup->is_authenticated)
+ ifmsh->security |= IEEE80211_MESH_SEC_AUTHED;
+ if (setup->is_secure)
+ ifmsh->security |= IEEE80211_MESH_SEC_SECURED;
return 0;
}
@@ -1275,9 +1309,10 @@
}
#ifdef CONFIG_PM
-static int ieee80211_suspend(struct wiphy *wiphy)
+static int ieee80211_suspend(struct wiphy *wiphy,
+ struct cfg80211_wowlan *wowlan)
{
- return __ieee80211_suspend(wiphy_priv(wiphy));
+ return __ieee80211_suspend(wiphy_priv(wiphy), wowlan);
}
static int ieee80211_resume(struct wiphy *wiphy)
@@ -1320,6 +1355,30 @@
return ieee80211_request_scan(sdata, req);
}
+static int
+ieee80211_sched_scan_start(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_sched_scan_request *req)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ if (!sdata->local->ops->sched_scan_start)
+ return -EOPNOTSUPP;
+
+ return ieee80211_request_sched_scan_start(sdata, req);
+}
+
+static int
+ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ if (!sdata->local->ops->sched_scan_stop)
+ return -EOPNOTSUPP;
+
+ return ieee80211_request_sched_scan_stop(sdata);
+}
+
static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_auth_request *req)
{
@@ -1504,6 +1563,8 @@
enum ieee80211_smps_mode old_req;
int err;
+ lockdep_assert_held(&sdata->u.mgd.mtx);
+
old_req = sdata->u.mgd.req_smps;
sdata->u.mgd.req_smps = smps_mode;
@@ -1609,16 +1670,13 @@
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- int i;
+ int i, ret;
- /*
- * This _could_ be supported by providing a hook for
- * drivers for this function, but at this point it
- * doesn't seem worth bothering.
- */
- if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
- return -EOPNOTSUPP;
-
+ if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
+ ret = drv_set_bitrate_mask(local, sdata, mask);
+ if (ret)
+ return ret;
+ }
for (i = 0; i < IEEE80211_NUM_BANDS; i++)
sdata->rc_rateidx_mask[i] = mask->control[i].legacy;
@@ -2062,6 +2120,8 @@
.suspend = ieee80211_suspend,
.resume = ieee80211_resume,
.scan = ieee80211_scan,
+ .sched_scan_start = ieee80211_sched_scan_start,
+ .sched_scan_stop = ieee80211_sched_scan_stop,
.auth = ieee80211_auth,
.assoc = ieee80211_assoc,
.deauth = ieee80211_deauth,
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 51f0d78..186e02f 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -37,7 +37,7 @@
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
-#define DEBUGFS_READONLY_FILE(name, fmt, value...) \
+#define DEBUGFS_READONLY_FILE_FN(name, fmt, value...) \
static ssize_t name## _read(struct file *file, char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
@@ -45,14 +45,19 @@
\
return mac80211_format_buffer(userbuf, count, ppos, \
fmt "\n", ##value); \
-} \
- \
+}
+
+#define DEBUGFS_READONLY_FILE_OPS(name) \
static const struct file_operations name## _ops = { \
.read = name## _read, \
.open = mac80211_open_file_generic, \
.llseek = generic_file_llseek, \
};
+#define DEBUGFS_READONLY_FILE(name, fmt, value...) \
+ DEBUGFS_READONLY_FILE_FN(name, fmt, value) \
+ DEBUGFS_READONLY_FILE_OPS(name)
+
#define DEBUGFS_ADD(name) \
debugfs_create_file(#name, 0400, phyd, local, &name## _ops);
@@ -130,7 +135,7 @@
struct ieee80211_local *local = file->private_data;
rtnl_lock();
- __ieee80211_suspend(&local->hw);
+ __ieee80211_suspend(&local->hw, NULL);
__ieee80211_resume(&local->hw);
rtnl_unlock();
@@ -291,11 +296,70 @@
return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
}
-static const struct file_operations channel_type_ops = {
- .read = channel_type_read,
- .open = mac80211_open_file_generic,
- .llseek = default_llseek,
-};
+static ssize_t hwflags_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_local *local = file->private_data;
+ int mxln = 500;
+ ssize_t rv;
+ char *buf = kzalloc(mxln, GFP_KERNEL);
+ int sf = 0; /* how many written so far */
+
+ sf += snprintf(buf, mxln - sf, "0x%x\n", local->hw.flags);
+ if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+ sf += snprintf(buf + sf, mxln - sf, "HAS_RATE_CONTROL\n");
+ if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
+ sf += snprintf(buf + sf, mxln - sf, "RX_INCLUDES_FCS\n");
+ if (local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING)
+ sf += snprintf(buf + sf, mxln - sf,
+ "HOST_BCAST_PS_BUFFERING\n");
+ if (local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)
+ sf += snprintf(buf + sf, mxln - sf,
+ "2GHZ_SHORT_SLOT_INCAPABLE\n");
+ if (local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)
+ sf += snprintf(buf + sf, mxln - sf,
+ "2GHZ_SHORT_PREAMBLE_INCAPABLE\n");
+ if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
+ sf += snprintf(buf + sf, mxln - sf, "SIGNAL_UNSPEC\n");
+ if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ sf += snprintf(buf + sf, mxln - sf, "SIGNAL_DBM\n");
+ if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD)
+ sf += snprintf(buf + sf, mxln - sf, "NEED_DTIM_PERIOD\n");
+ if (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)
+ sf += snprintf(buf + sf, mxln - sf, "SPECTRUM_MGMT\n");
+ if (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION)
+ sf += snprintf(buf + sf, mxln - sf, "AMPDU_AGGREGATION\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_PS)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_PS\n");
+ if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+ sf += snprintf(buf + sf, mxln - sf, "PS_NULLFUNC_STACK\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n");
+ if (local->hw.flags & IEEE80211_HW_MFP_CAPABLE)
+ sf += snprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n");
+ if (local->hw.flags & IEEE80211_HW_BEACON_FILTER)
+ sf += snprintf(buf + sf, mxln - sf, "BEACON_FILTER\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_STATIC_SMPS\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_SMPS\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_UAPSD\n");
+ if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ sf += snprintf(buf + sf, mxln - sf, "REPORTS_TX_ACK_STATUS\n");
+ if (local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
+ sf += snprintf(buf + sf, mxln - sf, "CONNECTION_MONITOR\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_CQM_RSSI\n");
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_PER_STA_GTK)
+ sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_PER_STA_GTK\n");
+ if (local->hw.flags & IEEE80211_HW_AP_LINK_PS)
+ sf += snprintf(buf + sf, mxln - sf, "AP_LINK_PS\n");
+
+ rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
+ kfree(buf);
+ return rv;
+}
static ssize_t queues_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
@@ -315,11 +379,9 @@
return simple_read_from_buffer(user_buf, count, ppos, buf, res);
}
-static const struct file_operations queues_ops = {
- .read = queues_read,
- .open = mac80211_open_file_generic,
- .llseek = default_llseek,
-};
+DEBUGFS_READONLY_FILE_OPS(hwflags);
+DEBUGFS_READONLY_FILE_OPS(channel_type);
+DEBUGFS_READONLY_FILE_OPS(queues);
/* statistics stuff */
@@ -395,6 +457,7 @@
DEBUGFS_ADD(uapsd_queues);
DEBUGFS_ADD(uapsd_max_sp_len);
DEBUGFS_ADD(channel_type);
+ DEBUGFS_ADD(hwflags);
DEBUGFS_ADD(user_power);
DEBUGFS_ADD(power);
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index f7ef347..33c58b8 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -241,16 +241,12 @@
if (!key->debugfs.dir)
return;
- rcu_read_lock();
- sta = rcu_dereference(key->sta);
- if (sta)
+ sta = key->sta;
+ if (sta) {
sprintf(buf, "../../stations/%pM", sta->sta.addr);
- rcu_read_unlock();
-
- /* using sta as a boolean is fine outside RCU lock */
- if (sta)
key->debugfs.stalink =
debugfs_create_symlink("station", key->debugfs.dir, buf);
+ }
DEBUGFS_ADD(keylen);
DEBUGFS_ADD(flags);
@@ -286,7 +282,8 @@
lockdep_assert_held(&sdata->local->key_mtx);
if (sdata->default_unicast_key) {
- key = sdata->default_unicast_key;
+ key = key_mtx_dereference(sdata->local,
+ sdata->default_unicast_key);
sprintf(buf, "../keys/%d", key->debugfs.cnt);
sdata->debugfs.default_unicast_key =
debugfs_create_symlink("default_unicast_key",
@@ -297,7 +294,8 @@
}
if (sdata->default_multicast_key) {
- key = sdata->default_multicast_key;
+ key = key_mtx_dereference(sdata->local,
+ sdata->default_multicast_key);
sprintf(buf, "../keys/%d", key->debugfs.cnt);
sdata->debugfs.default_multicast_key =
debugfs_create_symlink("default_multicast_key",
@@ -316,9 +314,8 @@
if (!sdata->debugfs.dir)
return;
- /* this is running under the key lock */
-
- key = sdata->default_mgmt_key;
+ key = key_mtx_dereference(sdata->local,
+ sdata->default_mgmt_key);
if (key) {
sprintf(buf, "../keys/%d", key->debugfs.cnt);
sdata->debugfs.default_mgmt_key =
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index dacace6..9ea7c0d 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -177,9 +177,9 @@
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
- mutex_lock(&local->iflist_mtx);
+ mutex_lock(&sdata->u.mgd.mtx);
err = __ieee80211_request_smps(sdata, smps_mode);
- mutex_unlock(&local->iflist_mtx);
+ mutex_unlock(&sdata->u.mgd.mtx);
return err;
}
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index c04a139..a01d213 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -92,6 +92,31 @@
}
STA_OPS(inactive_ms);
+
+static ssize_t sta_connected_time_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct sta_info *sta = file->private_data;
+ struct timespec uptime;
+ struct tm result;
+ long connected_time_secs;
+ char buf[100];
+ int res;
+ do_posix_clock_monotonic_gettime(&uptime);
+ connected_time_secs = uptime.tv_sec - sta->last_connected;
+ time_to_tm(connected_time_secs, 0, &result);
+ result.tm_year -= 70;
+ result.tm_mday -= 1;
+ res = scnprintf(buf, sizeof(buf),
+ "years - %ld\nmonths - %d\ndays - %d\nclock - %d:%d:%d\n\n",
+ result.tm_year, result.tm_mon, result.tm_mday,
+ result.tm_hour, result.tm_min, result.tm_sec);
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+STA_OPS(connected_time);
+
+
+
static ssize_t sta_last_seq_ctrl_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
@@ -324,6 +349,7 @@
DEBUGFS_ADD(flags);
DEBUGFS_ADD(num_ps_buf_frames);
DEBUGFS_ADD(inactive_ms);
+ DEBUGFS_ADD(connected_time);
DEBUGFS_ADD(last_seq_ctrl);
DEBUGFS_ADD(agg_status);
DEBUGFS_ADD(dev);
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 9c0d62b..eebf7a6 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -41,6 +41,33 @@
local->started = false;
}
+#ifdef CONFIG_PM
+static inline int drv_suspend(struct ieee80211_local *local,
+ struct cfg80211_wowlan *wowlan)
+{
+ int ret;
+
+ might_sleep();
+
+ trace_drv_suspend(local);
+ ret = local->ops->suspend(&local->hw, wowlan);
+ trace_drv_return_int(local, ret);
+ return ret;
+}
+
+static inline int drv_resume(struct ieee80211_local *local)
+{
+ int ret;
+
+ might_sleep();
+
+ trace_drv_resume(local);
+ ret = local->ops->resume(&local->hw);
+ trace_drv_return_int(local, ret);
+ return ret;
+}
+#endif
+
static inline int drv_add_interface(struct ieee80211_local *local,
struct ieee80211_vif *vif)
{
@@ -185,12 +212,39 @@
might_sleep();
- trace_drv_hw_scan(local, sdata, req);
+ trace_drv_hw_scan(local, sdata);
ret = local->ops->hw_scan(&local->hw, &sdata->vif, req);
trace_drv_return_int(local, ret);
return ret;
}
+static inline int
+drv_sched_scan_start(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies)
+{
+ int ret;
+
+ might_sleep();
+
+ trace_drv_sched_scan_start(local, sdata);
+ ret = local->ops->sched_scan_start(&local->hw, &sdata->vif,
+ req, ies);
+ trace_drv_return_int(local, ret);
+ return ret;
+}
+
+static inline void drv_sched_scan_stop(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata)
+{
+ might_sleep();
+
+ trace_drv_sched_scan_stop(local, sdata);
+ local->ops->sched_scan_stop(&local->hw, &sdata->vif);
+ trace_drv_return_void(local);
+}
+
static inline void drv_sw_scan_start(struct ieee80211_local *local)
{
might_sleep();
@@ -552,4 +606,35 @@
trace_drv_return_void(local);
}
+static inline bool drv_tx_frames_pending(struct ieee80211_local *local)
+{
+ bool ret = false;
+
+ might_sleep();
+
+ trace_drv_tx_frames_pending(local);
+ if (local->ops->tx_frames_pending)
+ ret = local->ops->tx_frames_pending(&local->hw);
+ trace_drv_return_bool(local, ret);
+
+ return ret;
+}
+
+static inline int drv_set_bitrate_mask(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ int ret = -EOPNOTSUPP;
+
+ might_sleep();
+
+ trace_drv_set_bitrate_mask(local, sdata, mask);
+ if (local->ops->set_bitrate_mask)
+ ret = local->ops->set_bitrate_mask(&local->hw,
+ &sdata->vif, mask);
+ trace_drv_return_int(local, ret);
+
+ return ret;
+}
+
#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 45aab80..ed9edcb 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -55,6 +55,70 @@
TP_printk(LOCAL_PR_FMT, LOCAL_PR_ARG)
);
+DECLARE_EVENT_CLASS(local_sdata_addr_evt,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ __array(char, addr, 6)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ memcpy(__entry->addr, sdata->vif.addr, 6);
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " addr:%pM",
+ LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
+ )
+);
+
+DECLARE_EVENT_CLASS(local_u32_evt,
+ TP_PROTO(struct ieee80211_local *local, u32 value),
+ TP_ARGS(local, value),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u32, value)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->value = value;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " value:%d",
+ LOCAL_PR_ARG, __entry->value
+ )
+);
+
+DECLARE_EVENT_CLASS(local_sdata_evt,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT,
+ LOCAL_PR_ARG, VIF_PR_ARG
+ )
+);
+
DEFINE_EVENT(local_only_evt, drv_return_void,
TP_PROTO(struct ieee80211_local *local),
TP_ARGS(local)
@@ -74,6 +138,21 @@
TP_printk(LOCAL_PR_FMT " - %d", LOCAL_PR_ARG, __entry->ret)
);
+TRACE_EVENT(drv_return_bool,
+ TP_PROTO(struct ieee80211_local *local, bool ret),
+ TP_ARGS(local, ret),
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(bool, ret)
+ ),
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ ),
+ TP_printk(LOCAL_PR_FMT " - %s", LOCAL_PR_ARG, (__entry->ret) ?
+ "true" : "false")
+);
+
TRACE_EVENT(drv_return_u64,
TP_PROTO(struct ieee80211_local *local, u64 ret),
TP_ARGS(local, ret),
@@ -93,33 +172,25 @@
TP_ARGS(local)
);
+DEFINE_EVENT(local_only_evt, drv_suspend,
+ TP_PROTO(struct ieee80211_local *local),
+ TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, drv_resume,
+ TP_PROTO(struct ieee80211_local *local),
+ TP_ARGS(local)
+);
+
DEFINE_EVENT(local_only_evt, drv_stop,
TP_PROTO(struct ieee80211_local *local),
TP_ARGS(local)
);
-TRACE_EVENT(drv_add_interface,
+DEFINE_EVENT(local_sdata_addr_evt, drv_add_interface,
TP_PROTO(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata),
-
- TP_ARGS(local, sdata),
-
- TP_STRUCT__entry(
- LOCAL_ENTRY
- VIF_ENTRY
- __array(char, addr, 6)
- ),
-
- TP_fast_assign(
- LOCAL_ASSIGN;
- VIF_ASSIGN;
- memcpy(__entry->addr, sdata->vif.addr, 6);
- ),
-
- TP_printk(
- LOCAL_PR_FMT VIF_PR_FMT " addr:%pM",
- LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
- )
+ TP_ARGS(local, sdata)
);
TRACE_EVENT(drv_change_interface,
@@ -150,27 +221,10 @@
)
);
-TRACE_EVENT(drv_remove_interface,
- TP_PROTO(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata),
-
- TP_ARGS(local, sdata),
-
- TP_STRUCT__entry(
- LOCAL_ENTRY
- VIF_ENTRY
- __array(char, addr, 6)
- ),
-
- TP_fast_assign(
- LOCAL_ASSIGN;
- VIF_ASSIGN;
- memcpy(__entry->addr, sdata->vif.addr, 6);
- ),
-
- TP_printk(
- LOCAL_PR_FMT VIF_PR_FMT " addr:%pM",
- LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
- )
+DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata)
);
TRACE_EVENT(drv_config,
@@ -400,27 +454,22 @@
)
);
-TRACE_EVENT(drv_hw_scan,
+DEFINE_EVENT(local_sdata_evt, drv_hw_scan,
TP_PROTO(struct ieee80211_local *local,
- struct ieee80211_sub_if_data *sdata,
- struct cfg80211_scan_request *req),
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata)
+);
- TP_ARGS(local, sdata, req),
+DEFINE_EVENT(local_sdata_evt, drv_sched_scan_start,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata)
+);
- TP_STRUCT__entry(
- LOCAL_ENTRY
- VIF_ENTRY
- ),
-
- TP_fast_assign(
- LOCAL_ASSIGN;
- VIF_ASSIGN;
- ),
-
- TP_printk(
- LOCAL_PR_FMT VIF_PR_FMT,
- LOCAL_PR_ARG,VIF_PR_ARG
- )
+DEFINE_EVENT(local_sdata_evt, drv_sched_scan_stop,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata)
);
DEFINE_EVENT(local_only_evt, drv_sw_scan_start,
@@ -489,46 +538,14 @@
)
);
-TRACE_EVENT(drv_set_frag_threshold,
+DEFINE_EVENT(local_u32_evt, drv_set_frag_threshold,
TP_PROTO(struct ieee80211_local *local, u32 value),
-
- TP_ARGS(local, value),
-
- TP_STRUCT__entry(
- LOCAL_ENTRY
- __field(u32, value)
- ),
-
- TP_fast_assign(
- LOCAL_ASSIGN;
- __entry->value = value;
- ),
-
- TP_printk(
- LOCAL_PR_FMT " value:%d",
- LOCAL_PR_ARG, __entry->value
- )
+ TP_ARGS(local, value)
);
-TRACE_EVENT(drv_set_rts_threshold,
+DEFINE_EVENT(local_u32_evt, drv_set_rts_threshold,
TP_PROTO(struct ieee80211_local *local, u32 value),
-
- TP_ARGS(local, value),
-
- TP_STRUCT__entry(
- LOCAL_ENTRY
- __field(u32, value)
- ),
-
- TP_fast_assign(
- LOCAL_ASSIGN;
- __entry->value = value;
- ),
-
- TP_printk(
- LOCAL_PR_FMT " value:%d",
- LOCAL_PR_ARG, __entry->value
- )
+ TP_ARGS(local, value)
);
TRACE_EVENT(drv_set_coverage_class,
@@ -964,11 +981,43 @@
)
);
+DEFINE_EVENT(local_only_evt, drv_tx_frames_pending,
+ TP_PROTO(struct ieee80211_local *local),
+ TP_ARGS(local)
+);
+
DEFINE_EVENT(local_only_evt, drv_offchannel_tx_cancel_wait,
TP_PROTO(struct ieee80211_local *local),
TP_ARGS(local)
);
+TRACE_EVENT(drv_set_bitrate_mask,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ const struct cfg80211_bitrate_mask *mask),
+
+ TP_ARGS(local, sdata, mask),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ __field(u32, legacy_2g)
+ __field(u32, legacy_5g)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ __entry->legacy_2g = mask->control[IEEE80211_BAND_2GHZ].legacy;
+ __entry->legacy_5g = mask->control[IEEE80211_BAND_5GHZ].legacy;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " 2G Mask:0x%x 5G Mask:0x%x",
+ LOCAL_PR_ARG, VIF_PR_ARG, __entry->legacy_2g, __entry->legacy_5g
+ )
+);
+
/*
* Tracing for API calls that drivers call.
*/
@@ -1147,6 +1196,42 @@
)
);
+TRACE_EVENT(api_sched_scan_results,
+ TP_PROTO(struct ieee80211_local *local),
+
+ TP_ARGS(local),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(api_sched_scan_stopped,
+ TP_PROTO(struct ieee80211_local *local),
+
+ TP_ARGS(local),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
TRACE_EVENT(api_sta_block_awake,
TP_PROTO(struct ieee80211_local *local,
struct ieee80211_sta *sta, bool block),
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index b9e4b9b..591add2 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -140,14 +140,29 @@
sta, tid, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_TIMEOUT, true);
- tid_tx = sta->ampdu_mlme.tid_tx[tid];
- if (!tid_tx)
- continue;
+ tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
+ if (tid_tx) {
+ /*
+ * Assign it over to the normal tid_tx array
+ * where it "goes live".
+ */
+ spin_lock_bh(&sta->lock);
- if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state))
+ sta->ampdu_mlme.tid_start_tx[tid] = NULL;
+ /* could there be a race? */
+ if (sta->ampdu_mlme.tid_tx[tid])
+ kfree(tid_tx);
+ else
+ ieee80211_assign_tid_tx(sta, tid, tid_tx);
+ spin_unlock_bh(&sta->lock);
+
ieee80211_tx_ba_session_handle_start(sta, tid);
- else if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
- &tid_tx->state))
+ continue;
+ }
+
+ tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+ if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
+ &tid_tx->state))
___ieee80211_stop_tx_ba_session(sta, tid,
WLAN_BACK_INITIATOR,
true);
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 3e81af1f..421eaa6 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -40,7 +40,7 @@
struct ieee80211_mgmt *mgmt,
size_t len)
{
- u16 auth_alg, auth_transaction, status_code;
+ u16 auth_alg, auth_transaction;
lockdep_assert_held(&sdata->u.ibss.mtx);
@@ -49,7 +49,6 @@
auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
- status_code = le16_to_cpu(mgmt->u.auth.status_code);
/*
* IEEE 802.11 standard does not require authentication in IBSS
@@ -527,8 +526,6 @@
static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN];
u16 capability;
int i;
@@ -551,8 +548,6 @@
printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %pM\n",
sdata->name, bssid);
- sband = local->hw.wiphy->bands[ifibss->channel->band];
-
capability = WLAN_CAPABILITY_IBSS;
if (ifibss->privacy)
@@ -661,19 +656,22 @@
static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
struct sk_buff *req)
{
- struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(req);
struct ieee80211_mgmt *mgmt = (void *)req->data;
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
int tx_last_beacon, len = req->len;
struct sk_buff *skb;
struct ieee80211_mgmt *resp;
+ struct sk_buff *presp;
u8 *pos, *end;
lockdep_assert_held(&ifibss->mtx);
+ presp = rcu_dereference_protected(ifibss->presp,
+ lockdep_is_held(&ifibss->mtx));
+
if (ifibss->state != IEEE80211_IBSS_MLME_JOINED ||
- len < 24 + 2 || !ifibss->presp)
+ len < 24 + 2 || !presp)
return;
tx_last_beacon = drv_tx_last_beacon(local);
@@ -685,7 +683,7 @@
mgmt->bssid, tx_last_beacon);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
- if (!tx_last_beacon && !(rx_status->rx_flags & IEEE80211_RX_RA_MATCH))
+ if (!tx_last_beacon && is_multicast_ether_addr(mgmt->da))
return;
if (memcmp(mgmt->bssid, ifibss->bssid, ETH_ALEN) != 0 &&
@@ -711,7 +709,7 @@
}
/* Reply with ProbeResp */
- skb = skb_copy(ifibss->presp, GFP_KERNEL);
+ skb = skb_copy(presp, GFP_KERNEL);
if (!skb)
return;
@@ -991,7 +989,8 @@
/* remove beacon */
kfree(sdata->u.ibss.ie);
- skb = sdata->u.ibss.presp;
+ skb = rcu_dereference_protected(sdata->u.ibss.presp,
+ lockdep_is_held(&sdata->u.ibss.mtx));
rcu_assign_pointer(sdata->u.ibss.presp, NULL);
sdata->vif.bss_conf.ibss_joined = false;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c18396c..2025af5 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -214,7 +214,7 @@
};
struct ieee80211_if_ap {
- struct beacon_data *beacon;
+ struct beacon_data __rcu *beacon;
struct list_head vlans;
@@ -237,7 +237,7 @@
struct list_head list;
/* used for all tx if the VLAN is configured to 4-addr mode */
- struct sta_info *sta;
+ struct sta_info __rcu *sta;
};
struct mesh_stats {
@@ -442,7 +442,8 @@
unsigned long ibss_join_req;
/* probe response/beacon for IBSS */
- struct sk_buff *presp, *skb;
+ struct sk_buff __rcu *presp;
+ struct sk_buff *skb;
enum {
IEEE80211_IBSS_MLME_SEARCH,
@@ -488,8 +489,13 @@
struct mesh_config mshcfg;
u32 mesh_seqnum;
bool accepting_plinks;
- const u8 *vendor_ie;
- u8 vendor_ie_len;
+ const u8 *ie;
+ u8 ie_len;
+ enum {
+ IEEE80211_MESH_SEC_NONE = 0x0,
+ IEEE80211_MESH_SEC_AUTHED = 0x1,
+ IEEE80211_MESH_SEC_SECURED = 0x2,
+ } security;
};
#ifdef CONFIG_MAC80211_MESH
@@ -562,9 +568,10 @@
struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX];
unsigned int fragment_next;
- struct ieee80211_key *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
- struct ieee80211_key *default_unicast_key, *default_multicast_key;
- struct ieee80211_key *default_mgmt_key;
+ struct ieee80211_key __rcu *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
+ struct ieee80211_key __rcu *default_unicast_key;
+ struct ieee80211_key __rcu *default_multicast_key;
+ struct ieee80211_key __rcu *default_mgmt_key;
u16 sequence_number;
__be16 control_port_protocol;
@@ -763,8 +770,14 @@
/* device is started */
bool started;
+ /* wowlan is enabled -- don't reconfig on resume */
+ bool wowlan;
+
int tx_headroom; /* required headroom for hardware/radiotap */
+ /* count for keys needing tailroom space allocation */
+ int crypto_tx_tailroom_needed_cnt;
+
/* Tasklet and skb queue to process calls from IRQ mode. All frames
* added to skb_queue will be processed, but frames in
* skb_queue_unreliable may be dropped if the total length of these
@@ -794,7 +807,7 @@
spinlock_t sta_lock;
unsigned long num_sta;
struct list_head sta_list, sta_pending_list;
- struct sta_info *sta_hash[STA_HASH_SIZE];
+ struct sta_info __rcu *sta_hash[STA_HASH_SIZE];
struct timer_list sta_cleanup;
struct work_struct sta_finish_work;
int sta_generation;
@@ -809,8 +822,8 @@
struct rate_control_ref *rate_ctrl;
- struct crypto_blkcipher *wep_tx_tfm;
- struct crypto_blkcipher *wep_rx_tfm;
+ struct crypto_cipher *wep_tx_tfm;
+ struct crypto_cipher *wep_rx_tfm;
u32 wep_iv;
/* see iface.c */
@@ -836,6 +849,10 @@
int scan_channel_idx;
int scan_ies_len;
+ bool sched_scanning;
+ struct ieee80211_sched_scan_ies sched_scan_ies;
+ struct work_struct sched_scan_stopped_work;
+
unsigned long leave_oper_channel_time;
enum mac80211_scan_state next_scan_state;
struct delayed_work scan_work;
@@ -1143,6 +1160,12 @@
void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss);
+/* scheduled scan handling */
+int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_sched_scan_request *req);
+int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata);
+void ieee80211_sched_scan_stopped_work(struct work_struct *work);
+
/* off-channel helpers */
bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local);
void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
@@ -1246,7 +1269,8 @@
void ieee80211_stop_device(struct ieee80211_local *local);
#ifdef CONFIG_PM
-int __ieee80211_suspend(struct ieee80211_hw *hw);
+int __ieee80211_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan);
static inline int __ieee80211_resume(struct ieee80211_hw *hw)
{
@@ -1259,7 +1283,8 @@
return ieee80211_reconfig(hw_to_local(hw));
}
#else
-static inline int __ieee80211_suspend(struct ieee80211_hw *hw)
+static inline int __ieee80211_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
{
return 0;
}
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 4054399..7dfbe71 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -449,7 +449,8 @@
/* APs need special treatment */
if (sdata->vif.type == NL80211_IFTYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmpsdata;
- struct beacon_data *old_beacon = sdata->u.ap.beacon;
+ struct beacon_data *old_beacon =
+ rtnl_dereference(sdata->u.ap.beacon);
/* sdata_running will return false, so this will disable */
ieee80211_bss_info_change_notify(sdata,
@@ -1144,10 +1145,6 @@
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
- ret = dev_alloc_name(ndev, ndev->name);
- if (ret < 0)
- goto fail;
-
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index af3c564..31afd712 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -101,6 +101,11 @@
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
+
+ if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
+ key->local->crypto_tx_tailroom_needed_cnt--;
+
return 0;
}
@@ -156,6 +161,10 @@
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
+
+ if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
+ key->local->crypto_tx_tailroom_needed_cnt++;
}
void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
@@ -186,7 +195,7 @@
assert_key_lock(sdata->local);
if (idx >= 0 && idx < NUM_DEFAULT_KEYS)
- key = sdata->keys[idx];
+ key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
if (uni)
rcu_assign_pointer(sdata->default_unicast_key, key);
@@ -213,7 +222,7 @@
if (idx >= NUM_DEFAULT_KEYS &&
idx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS)
- key = sdata->keys[idx];
+ key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
rcu_assign_pointer(sdata->default_mgmt_key, key);
@@ -257,9 +266,15 @@
else
idx = new->conf.keyidx;
- defunikey = old && sdata->default_unicast_key == old;
- defmultikey = old && sdata->default_multicast_key == old;
- defmgmtkey = old && sdata->default_mgmt_key == old;
+ defunikey = old &&
+ old == key_mtx_dereference(sdata->local,
+ sdata->default_unicast_key);
+ defmultikey = old &&
+ old == key_mtx_dereference(sdata->local,
+ sdata->default_multicast_key);
+ defmgmtkey = old &&
+ old == key_mtx_dereference(sdata->local,
+ sdata->default_mgmt_key);
if (defunikey && !new)
__ieee80211_set_default_key(sdata, -1, true, false);
@@ -388,8 +403,10 @@
ieee80211_aes_key_free(key->u.ccmp.tfm);
if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
- if (key->local)
+ if (key->local) {
ieee80211_debugfs_key_remove(key);
+ key->local->crypto_tx_tailroom_needed_cnt--;
+ }
kfree(key);
}
@@ -440,17 +457,19 @@
mutex_lock(&sdata->local->key_mtx);
if (sta && pairwise)
- old_key = sta->ptk;
+ old_key = key_mtx_dereference(sdata->local, sta->ptk);
else if (sta)
- old_key = sta->gtk[idx];
+ old_key = key_mtx_dereference(sdata->local, sta->gtk[idx]);
else
- old_key = sdata->keys[idx];
+ old_key = key_mtx_dereference(sdata->local, sdata->keys[idx]);
__ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
__ieee80211_key_destroy(old_key);
ieee80211_debugfs_key_add(key);
+ key->local->crypto_tx_tailroom_needed_cnt++;
+
ret = ieee80211_key_enable_hw_accel(key);
mutex_unlock(&sdata->local->key_mtx);
@@ -458,8 +477,11 @@
return ret;
}
-static void __ieee80211_key_free(struct ieee80211_key *key)
+void __ieee80211_key_free(struct ieee80211_key *key)
{
+ if (!key)
+ return;
+
/*
* Replace key with nothingness if it was ever used.
*/
@@ -473,9 +495,6 @@
void ieee80211_key_free(struct ieee80211_local *local,
struct ieee80211_key *key)
{
- if (!key)
- return;
-
mutex_lock(&local->key_mtx);
__ieee80211_key_free(key);
mutex_unlock(&local->key_mtx);
@@ -492,8 +511,12 @@
mutex_lock(&sdata->local->key_mtx);
- list_for_each_entry(key, &sdata->key_list, list)
+ sdata->local->crypto_tx_tailroom_needed_cnt = 0;
+
+ list_for_each_entry(key, &sdata->key_list, list) {
+ sdata->local->crypto_tx_tailroom_needed_cnt++;
ieee80211_key_enable_hw_accel(key);
+ }
mutex_unlock(&sdata->local->key_mtx);
}
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index 4ddbe27..d801d53 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -135,6 +135,7 @@
int __must_check ieee80211_key_link(struct ieee80211_key *key,
struct ieee80211_sub_if_data *sdata,
struct sta_info *sta);
+void __ieee80211_key_free(struct ieee80211_key *key);
void ieee80211_key_free(struct ieee80211_local *local,
struct ieee80211_key *key);
void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx,
@@ -145,4 +146,7 @@
void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata);
void ieee80211_disable_keys(struct ieee80211_sub_if_data *sdata);
+#define key_mtx_dereference(local, ref) \
+ rcu_dereference_protected(ref, lockdep_is_held(&((local)->key_mtx)))
+
#endif /* IEEE80211_KEY_H */
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 562d298..0d7b08d 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -33,12 +33,6 @@
#include "cfg.h"
#include "debugfs.h"
-
-static bool ieee80211_disable_40mhz_24ghz;
-module_param(ieee80211_disable_40mhz_24ghz, bool, 0644);
-MODULE_PARM_DESC(ieee80211_disable_40mhz_24ghz,
- "Disable 40MHz support in the 2.4GHz band");
-
static struct lock_class_key ieee80211_rx_skb_queue_class;
void ieee80211_configure_filter(struct ieee80211_local *local)
@@ -364,7 +358,8 @@
flush_workqueue(local->workqueue);
mutex_lock(&local->mtx);
- WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
+ WARN(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
+ local->sched_scanning,
"%s called with hardware scan in progress\n", __func__);
mutex_unlock(&local->mtx);
@@ -545,7 +540,9 @@
},
[NL80211_IFTYPE_MESH_POINT] = {
.tx = 0xffff,
- .rx = BIT(IEEE80211_STYPE_ACTION >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4),
},
};
@@ -584,8 +581,7 @@
wiphy->flags |= WIPHY_FLAG_NETNS_OK |
WIPHY_FLAG_4ADDR_AP |
- WIPHY_FLAG_4ADDR_STATION |
- WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS;
+ WIPHY_FLAG_4ADDR_STATION;
if (!ops->set_key)
wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
@@ -656,6 +652,9 @@
setup_timer(&local->dynamic_ps_timer,
ieee80211_dynamic_ps_timer, (unsigned long) local);
+ INIT_WORK(&local->sched_scan_stopped_work,
+ ieee80211_sched_scan_stopped_work);
+
sta_info_init(local);
for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
@@ -686,7 +685,7 @@
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
- int result;
+ int result, i;
enum ieee80211_band band;
int channels, max_bitrates;
bool supp_ht;
@@ -701,6 +700,13 @@
WLAN_CIPHER_SUITE_AES_CMAC
};
+ if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns)
+#ifdef CONFIG_PM
+ && (!local->ops->suspend || !local->ops->resume)
+#endif
+ )
+ return -EINVAL;
+
if (hw->max_report_rates == 0)
hw->max_report_rates = hw->max_rates;
@@ -726,18 +732,6 @@
}
channels += sband->n_channels;
- /*
- * Since ieee80211_disable_40mhz_24ghz is global, we can
- * modify the sband's ht data even if the driver uses a
- * global structure for that.
- */
- if (ieee80211_disable_40mhz_24ghz &&
- band == IEEE80211_BAND_2GHZ &&
- sband->ht_cap.ht_supported) {
- sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
- }
-
if (max_bitrates < sband->n_bitrates)
max_bitrates = sband->n_bitrates;
supp_ht = supp_ht || sband->ht_cap.ht_supported;
@@ -749,17 +743,30 @@
return -ENOMEM;
/* if low-level driver supports AP, we also support VLAN */
- if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
- local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
+ hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+ hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
+ }
/* mac80211 always supports monitor */
- local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+ hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+ hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
+
+ /* mac80211 doesn't support more than 1 channel */
+ for (i = 0; i < hw->wiphy->n_iface_combinations; i++)
+ if (hw->wiphy->iface_combinations[i].num_different_channels > 1)
+ return -EINVAL;
#ifndef CONFIG_MAC80211_MESH
/* mesh depends on Kconfig, but drivers should set it if they want */
local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
#endif
+ /* if the underlying driver supports mesh, mac80211 will (at least)
+ * provide routing of mesh authentication frames to userspace */
+ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
+ local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
+
/* mac80211 supports control port protocol changing */
local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
@@ -838,6 +845,9 @@
if (!local->ops->remain_on_channel)
local->hw.wiphy->max_remain_on_channel_duration = 5000;
+ if (local->ops->sched_scan_start)
+ local->hw.wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
@@ -861,8 +871,10 @@
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
+#ifndef __CHECKER__
BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM !=
sizeof(struct ieee80211_tx_status_rtap_hdr));
+#endif
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
@@ -879,10 +891,6 @@
local->dynamic_ps_forced_timeout = -1;
- result = sta_info_start(local);
- if (result < 0)
- goto fail_sta_info;
-
result = ieee80211_wep_init(local);
if (result < 0)
wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
@@ -945,7 +953,6 @@
rtnl_unlock();
ieee80211_wep_free(local);
sta_info_stop(local);
- fail_sta_info:
destroy_workqueue(local->workqueue);
fail_workqueue:
wiphy_unregister(local->hw.wiphy);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 2a57cc0..29e9980 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -279,57 +279,14 @@
MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
*pos++ = 0x00;
- if (sdata->u.mesh.vendor_ie) {
- int len = sdata->u.mesh.vendor_ie_len;
- const u8 *data = sdata->u.mesh.vendor_ie;
+ if (sdata->u.mesh.ie) {
+ int len = sdata->u.mesh.ie_len;
+ const u8 *data = sdata->u.mesh.ie;
if (skb_tailroom(skb) > len)
memcpy(skb_put(skb, len), data, len);
}
}
-u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
-{
- /* Use last four bytes of hw addr and interface index as hash index */
- return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
- & tbl->hash_mask;
-}
-
-struct mesh_table *mesh_table_alloc(int size_order)
-{
- int i;
- struct mesh_table *newtbl;
-
- newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
- if (!newtbl)
- return NULL;
-
- newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
- (1 << size_order), GFP_KERNEL);
-
- if (!newtbl->hash_buckets) {
- kfree(newtbl);
- return NULL;
- }
-
- newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
- (1 << size_order), GFP_KERNEL);
- if (!newtbl->hashwlock) {
- kfree(newtbl->hash_buckets);
- kfree(newtbl);
- return NULL;
- }
-
- newtbl->size_order = size_order;
- newtbl->hash_mask = (1 << size_order) - 1;
- atomic_set(&newtbl->entries, 0);
- get_random_bytes(&newtbl->hash_rnd,
- sizeof(newtbl->hash_rnd));
- for (i = 0; i <= newtbl->hash_mask; i++)
- spin_lock_init(&newtbl->hashwlock[i]);
-
- return newtbl;
-}
-
static void ieee80211_mesh_path_timer(unsigned long data)
{
@@ -573,6 +530,10 @@
ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
&elems);
+ /* ignore beacons from secure mesh peers if our security is off */
+ if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE)
+ return;
+
if (elems.ds_params && elems.ds_params_len == 1)
freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
else
@@ -586,9 +547,7 @@
if (elems.mesh_id && elems.mesh_config &&
mesh_matches_local(&elems, sdata)) {
supp_rates = ieee80211_sta_get_rates(local, &elems, band);
-
- mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
- mesh_peer_accepts_plinks(&elems));
+ mesh_neighbour_update(mgmt->sa, supp_rates, sdata, &elems);
}
}
@@ -598,7 +557,7 @@
struct ieee80211_rx_status *rx_status)
{
switch (mgmt->u.action.category) {
- case WLAN_CATEGORY_MESH_PLINK:
+ case WLAN_CATEGORY_MESH_ACTION:
mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
break;
case WLAN_CATEGORY_MESH_PATH_SEL:
@@ -611,12 +570,9 @@
struct sk_buff *skb)
{
struct ieee80211_rx_status *rx_status;
- struct ieee80211_if_mesh *ifmsh;
struct ieee80211_mgmt *mgmt;
u16 stype;
- ifmsh = &sdata->u.mesh;
-
rx_status = IEEE80211_SKB_RXCB(skb);
mgmt = (struct ieee80211_mgmt *) skb->data;
stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index b99e230..e7c5fdd 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -92,7 +92,7 @@
u8 dst[ETH_ALEN];
u8 mpp[ETH_ALEN]; /* used for MPP or MAP */
struct ieee80211_sub_if_data *sdata;
- struct sta_info *next_hop;
+ struct sta_info __rcu *next_hop;
struct timer_list timer;
struct sk_buff_head frame_queue;
struct rcu_head rcu;
@@ -226,7 +226,8 @@
int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata);
/* Mesh plinks */
void mesh_neighbour_update(u8 *hw_addr, u32 rates,
- struct ieee80211_sub_if_data *sdata, bool add);
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee802_11_elems *ie);
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie);
void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
void mesh_plink_broken(struct sta_info *sta);
@@ -239,12 +240,8 @@
/* Private interfaces */
/* Mesh tables */
-struct mesh_table *mesh_table_alloc(int size_order);
-void mesh_table_free(struct mesh_table *tbl, bool free_leafs);
void mesh_mpath_table_grow(void);
void mesh_mpp_table_grow(void);
-u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
- struct mesh_table *tbl);
/* Mesh paths */
int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode,
const u8 *ra, struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 5bf64d7..2b18053 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -391,7 +391,6 @@
(mpath->flags & MESH_PATH_SN_VALID)) {
if (SN_GT(mpath->sn, orig_sn) ||
(mpath->sn == orig_sn &&
- action == MPATH_PREQ &&
new_metric >= mpath->metric)) {
process = false;
fresh_info = false;
@@ -561,6 +560,14 @@
}
+static inline struct sta_info *
+next_hop_deref_protected(struct mesh_path *mpath)
+{
+ return rcu_dereference_protected(mpath->next_hop,
+ lockdep_is_held(&mpath->state_lock));
+}
+
+
static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
u8 *prep_elem, u32 metric)
@@ -600,7 +607,7 @@
spin_unlock_bh(&mpath->state_lock);
goto fail;
}
- memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
+ memcpy(next_hop, next_hop_deref_protected(mpath)->sta.addr, ETH_ALEN);
spin_unlock_bh(&mpath->state_lock);
--ttl;
flags = PREP_IE_FLAGS(prep_elem);
@@ -633,7 +640,6 @@
struct mesh_path *mpath;
u8 ttl;
u8 *ta, *target_addr;
- u8 target_flags;
u32 target_sn;
u16 target_rcode;
@@ -644,7 +650,6 @@
return;
}
ttl--;
- target_flags = PERR_IE_TARGET_FLAGS(perr_elem);
target_addr = PERR_IE_TARGET_ADDR(perr_elem);
target_sn = PERR_IE_TARGET_SN(perr_elem);
target_rcode = PERR_IE_TARGET_RCODE(perr_elem);
@@ -654,7 +659,8 @@
if (mpath) {
spin_lock_bh(&mpath->state_lock);
if (mpath->flags & MESH_PATH_ACTIVE &&
- memcmp(ta, mpath->next_hop->sta.addr, ETH_ALEN) == 0 &&
+ memcmp(ta, next_hop_deref_protected(mpath)->sta.addr,
+ ETH_ALEN) == 0 &&
(!(mpath->flags & MESH_PATH_SN_VALID) ||
SN_GT(target_sn, mpath->sn))) {
mpath->flags &= ~MESH_PATH_ACTIVE;
@@ -675,12 +681,10 @@
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_path *mpath;
- u8 *ta;
u8 ttl, flags, hopcount;
u8 *orig_addr;
u32 orig_sn, metric;
- ta = mgmt->sa;
ttl = rann->rann_ttl;
if (ttl <= 1) {
ifmsh->mshstats.dropped_frames_ttl++;
@@ -918,6 +922,7 @@
{
struct sk_buff *skb_to_free = NULL;
struct mesh_path *mpath;
+ struct sta_info *next_hop;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
u8 *target_addr = hdr->addr3;
int err = 0;
@@ -945,7 +950,11 @@
mesh_queue_preq(mpath,
PREQ_Q_F_START | PREQ_Q_F_REFRESH);
}
- memcpy(hdr->addr1, mpath->next_hop->sta.addr, ETH_ALEN);
+ next_hop = rcu_dereference(mpath->next_hop);
+ if (next_hop)
+ memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN);
+ else
+ err = -ENOENT;
} else {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (!(mpath->flags & MESH_PATH_RESOLVING)) {
@@ -971,20 +980,11 @@
void mesh_path_timer(unsigned long data)
{
- struct ieee80211_sub_if_data *sdata;
- struct mesh_path *mpath;
+ struct mesh_path *mpath = (void *) data;
+ struct ieee80211_sub_if_data *sdata = mpath->sdata;
- rcu_read_lock();
- mpath = (struct mesh_path *) data;
- mpath = rcu_dereference(mpath);
- if (!mpath)
- goto endmpathtimer;
- sdata = mpath->sdata;
-
- if (sdata->local->quiescing) {
- rcu_read_unlock();
+ if (sdata->local->quiescing)
return;
- }
spin_lock_bh(&mpath->state_lock);
if (mpath->flags & MESH_PATH_RESOLVED ||
@@ -1001,8 +1001,6 @@
}
spin_unlock_bh(&mpath->state_lock);
-endmpathtimer:
- rcu_read_unlock();
}
void
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 336ca9d..83ce48e 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -40,6 +40,50 @@
static struct mesh_table *mpp_paths; /* Store paths for MPP&MAP */
int mesh_paths_generation;
+
+/* This lock will have the grow table function as writer and add / delete nodes
+ * as readers. When reading the table (i.e. doing lookups) we are well protected
+ * by RCU
+ */
+static DEFINE_RWLOCK(pathtbl_resize_lock);
+
+
+static struct mesh_table *mesh_table_alloc(int size_order)
+{
+ int i;
+ struct mesh_table *newtbl;
+
+ newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
+ if (!newtbl)
+ return NULL;
+
+ newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
+ (1 << size_order), GFP_KERNEL);
+
+ if (!newtbl->hash_buckets) {
+ kfree(newtbl);
+ return NULL;
+ }
+
+ newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
+ (1 << size_order), GFP_KERNEL);
+ if (!newtbl->hashwlock) {
+ kfree(newtbl->hash_buckets);
+ kfree(newtbl);
+ return NULL;
+ }
+
+ newtbl->size_order = size_order;
+ newtbl->hash_mask = (1 << size_order) - 1;
+ atomic_set(&newtbl->entries, 0);
+ get_random_bytes(&newtbl->hash_rnd,
+ sizeof(newtbl->hash_rnd));
+ for (i = 0; i <= newtbl->hash_mask; i++)
+ spin_lock_init(&newtbl->hashwlock[i]);
+
+ return newtbl;
+}
+
static void __mesh_table_free(struct mesh_table *tbl)
{
kfree(tbl->hash_buckets);
@@ -47,7 +91,7 @@
kfree(tbl);
}
-void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
+static void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
{
struct hlist_head *mesh_hash;
struct hlist_node *p, *q;
@@ -55,60 +99,56 @@
mesh_hash = tbl->hash_buckets;
for (i = 0; i <= tbl->hash_mask; i++) {
- spin_lock(&tbl->hashwlock[i]);
+ spin_lock_bh(&tbl->hashwlock[i]);
hlist_for_each_safe(p, q, &mesh_hash[i]) {
tbl->free_node(p, free_leafs);
atomic_dec(&tbl->entries);
}
- spin_unlock(&tbl->hashwlock[i]);
+ spin_unlock_bh(&tbl->hashwlock[i]);
}
__mesh_table_free(tbl);
}
-static struct mesh_table *mesh_table_grow(struct mesh_table *tbl)
+static int mesh_table_grow(struct mesh_table *oldtbl,
+ struct mesh_table *newtbl)
{
- struct mesh_table *newtbl;
struct hlist_head *oldhash;
struct hlist_node *p, *q;
int i;
- if (atomic_read(&tbl->entries)
- < tbl->mean_chain_len * (tbl->hash_mask + 1))
- goto endgrow;
+ if (atomic_read(&oldtbl->entries)
+ < oldtbl->mean_chain_len * (oldtbl->hash_mask + 1))
+ return -EAGAIN;
- newtbl = mesh_table_alloc(tbl->size_order + 1);
- if (!newtbl)
- goto endgrow;
+ newtbl->free_node = oldtbl->free_node;
+ newtbl->mean_chain_len = oldtbl->mean_chain_len;
+ newtbl->copy_node = oldtbl->copy_node;
+ atomic_set(&newtbl->entries, atomic_read(&oldtbl->entries));
- newtbl->free_node = tbl->free_node;
- newtbl->mean_chain_len = tbl->mean_chain_len;
- newtbl->copy_node = tbl->copy_node;
- atomic_set(&newtbl->entries, atomic_read(&tbl->entries));
-
- oldhash = tbl->hash_buckets;
- for (i = 0; i <= tbl->hash_mask; i++)
+ oldhash = oldtbl->hash_buckets;
+ for (i = 0; i <= oldtbl->hash_mask; i++)
hlist_for_each(p, &oldhash[i])
- if (tbl->copy_node(p, newtbl) < 0)
+ if (oldtbl->copy_node(p, newtbl) < 0)
goto errcopy;
- return newtbl;
+ return 0;
errcopy:
for (i = 0; i <= newtbl->hash_mask; i++) {
hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
- tbl->free_node(p, 0);
+ oldtbl->free_node(p, 0);
}
- __mesh_table_free(newtbl);
-endgrow:
- return NULL;
+ return -ENOMEM;
}
+static u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
+ struct mesh_table *tbl)
+{
+ /* Use last four bytes of hw addr and interface index as hash index */
+ return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
+ & tbl->hash_mask;
+}
-/* This lock will have the grow table function as writer and add / delete nodes
- * as readers. When reading the table (i.e. doing lookups) we are well protected
- * by RCU
- */
-static DEFINE_RWLOCK(pathtbl_resize_lock);
/**
*
@@ -280,7 +320,7 @@
if (!new_node)
goto err_node_alloc;
- read_lock(&pathtbl_resize_lock);
+ read_lock_bh(&pathtbl_resize_lock);
memcpy(new_mpath->dst, dst, ETH_ALEN);
new_mpath->sdata = sdata;
new_mpath->flags = 0;
@@ -295,7 +335,7 @@
hash_idx = mesh_table_hash(dst, sdata, mesh_paths);
bucket = &mesh_paths->hash_buckets[hash_idx];
- spin_lock(&mesh_paths->hashwlock[hash_idx]);
+ spin_lock_bh(&mesh_paths->hashwlock[hash_idx]);
err = -EEXIST;
hlist_for_each_entry(node, n, bucket, list) {
@@ -311,8 +351,8 @@
mesh_paths_generation++;
- spin_unlock(&mesh_paths->hashwlock[hash_idx]);
- read_unlock(&pathtbl_resize_lock);
+ spin_unlock_bh(&mesh_paths->hashwlock[hash_idx]);
+ read_unlock_bh(&pathtbl_resize_lock);
if (grow) {
set_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags);
ieee80211_queue_work(&local->hw, &sdata->work);
@@ -320,8 +360,8 @@
return 0;
err_exists:
- spin_unlock(&mesh_paths->hashwlock[hash_idx]);
- read_unlock(&pathtbl_resize_lock);
+ spin_unlock_bh(&mesh_paths->hashwlock[hash_idx]);
+ read_unlock_bh(&pathtbl_resize_lock);
kfree(new_node);
err_node_alloc:
kfree(new_mpath);
@@ -334,15 +374,21 @@
{
struct mesh_table *oldtbl, *newtbl;
- write_lock(&pathtbl_resize_lock);
+ rcu_read_lock();
+ newtbl = mesh_table_alloc(rcu_dereference(mesh_paths)->size_order + 1);
+ if (!newtbl)
+ return;
+ write_lock_bh(&pathtbl_resize_lock);
oldtbl = mesh_paths;
- newtbl = mesh_table_grow(mesh_paths);
- if (!newtbl) {
- write_unlock(&pathtbl_resize_lock);
+ if (mesh_table_grow(mesh_paths, newtbl) < 0) {
+ rcu_read_unlock();
+ __mesh_table_free(newtbl);
+ write_unlock_bh(&pathtbl_resize_lock);
return;
}
+ rcu_read_unlock();
rcu_assign_pointer(mesh_paths, newtbl);
- write_unlock(&pathtbl_resize_lock);
+ write_unlock_bh(&pathtbl_resize_lock);
synchronize_rcu();
mesh_table_free(oldtbl, false);
@@ -352,15 +398,21 @@
{
struct mesh_table *oldtbl, *newtbl;
- write_lock(&pathtbl_resize_lock);
+ rcu_read_lock();
+ newtbl = mesh_table_alloc(rcu_dereference(mpp_paths)->size_order + 1);
+ if (!newtbl)
+ return;
+ write_lock_bh(&pathtbl_resize_lock);
oldtbl = mpp_paths;
- newtbl = mesh_table_grow(mpp_paths);
- if (!newtbl) {
- write_unlock(&pathtbl_resize_lock);
+ if (mesh_table_grow(mpp_paths, newtbl) < 0) {
+ rcu_read_unlock();
+ __mesh_table_free(newtbl);
+ write_unlock_bh(&pathtbl_resize_lock);
return;
}
+ rcu_read_unlock();
rcu_assign_pointer(mpp_paths, newtbl);
- write_unlock(&pathtbl_resize_lock);
+ write_unlock_bh(&pathtbl_resize_lock);
synchronize_rcu();
mesh_table_free(oldtbl, false);
@@ -394,7 +446,7 @@
if (!new_node)
goto err_node_alloc;
- read_lock(&pathtbl_resize_lock);
+ read_lock_bh(&pathtbl_resize_lock);
memcpy(new_mpath->dst, dst, ETH_ALEN);
memcpy(new_mpath->mpp, mpp, ETH_ALEN);
new_mpath->sdata = sdata;
@@ -407,7 +459,7 @@
hash_idx = mesh_table_hash(dst, sdata, mpp_paths);
bucket = &mpp_paths->hash_buckets[hash_idx];
- spin_lock(&mpp_paths->hashwlock[hash_idx]);
+ spin_lock_bh(&mpp_paths->hashwlock[hash_idx]);
err = -EEXIST;
hlist_for_each_entry(node, n, bucket, list) {
@@ -421,8 +473,8 @@
mpp_paths->mean_chain_len * (mpp_paths->hash_mask + 1))
grow = 1;
- spin_unlock(&mpp_paths->hashwlock[hash_idx]);
- read_unlock(&pathtbl_resize_lock);
+ spin_unlock_bh(&mpp_paths->hashwlock[hash_idx]);
+ read_unlock_bh(&pathtbl_resize_lock);
if (grow) {
set_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags);
ieee80211_queue_work(&local->hw, &sdata->work);
@@ -430,8 +482,8 @@
return 0;
err_exists:
- spin_unlock(&mpp_paths->hashwlock[hash_idx]);
- read_unlock(&pathtbl_resize_lock);
+ spin_unlock_bh(&mpp_paths->hashwlock[hash_idx]);
+ read_unlock_bh(&pathtbl_resize_lock);
kfree(new_node);
err_node_alloc:
kfree(new_mpath);
@@ -544,11 +596,11 @@
int hash_idx;
int err = 0;
- read_lock(&pathtbl_resize_lock);
+ read_lock_bh(&pathtbl_resize_lock);
hash_idx = mesh_table_hash(addr, sdata, mesh_paths);
bucket = &mesh_paths->hash_buckets[hash_idx];
- spin_lock(&mesh_paths->hashwlock[hash_idx]);
+ spin_lock_bh(&mesh_paths->hashwlock[hash_idx]);
hlist_for_each_entry(node, n, bucket, list) {
mpath = node->mpath;
if (mpath->sdata == sdata &&
@@ -566,8 +618,8 @@
err = -ENXIO;
enddel:
mesh_paths_generation++;
- spin_unlock(&mesh_paths->hashwlock[hash_idx]);
- read_unlock(&pathtbl_resize_lock);
+ spin_unlock_bh(&mesh_paths->hashwlock[hash_idx]);
+ read_unlock_bh(&pathtbl_resize_lock);
return err;
}
@@ -719,7 +771,7 @@
struct hlist_node *p;
int i;
- read_lock(&pathtbl_resize_lock);
+ read_lock_bh(&pathtbl_resize_lock);
for_each_mesh_entry(mesh_paths, p, node, i) {
if (node->mpath->sdata != sdata)
continue;
@@ -734,7 +786,7 @@
} else
spin_unlock_bh(&mpath->state_lock);
}
- read_unlock(&pathtbl_resize_lock);
+ read_unlock_bh(&pathtbl_resize_lock);
}
void mesh_pathtbl_unregister(void)
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 44b5393..f4adc09 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -43,7 +43,7 @@
#define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks)
enum plink_frame_type {
- PLINK_OPEN = 0,
+ PLINK_OPEN = 1,
PLINK_CONFIRM,
PLINK_CLOSE
};
@@ -83,7 +83,7 @@
*/
static inline void mesh_plink_fsm_restart(struct sta_info *sta)
{
- sta->plink_state = PLINK_LISTEN;
+ sta->plink_state = NL80211_PLINK_LISTEN;
sta->llid = sta->plid = sta->reason = 0;
sta->plink_retries = 0;
}
@@ -105,7 +105,7 @@
if (!sta)
return NULL;
- sta->flags = WLAN_STA_AUTHORIZED;
+ sta->flags = WLAN_STA_AUTHORIZED | WLAN_STA_AUTH;
sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
rate_control_rate_init(sta);
@@ -126,11 +126,11 @@
struct ieee80211_sub_if_data *sdata = sta->sdata;
bool deactivated = false;
- if (sta->plink_state == PLINK_ESTAB) {
+ if (sta->plink_state == NL80211_PLINK_ESTAB) {
mesh_plink_dec_estab_count(sdata);
deactivated = true;
}
- sta->plink_state = PLINK_BLOCKED;
+ sta->plink_state = NL80211_PLINK_BLOCKED;
mesh_path_flush_by_nexthop(sta);
return deactivated;
@@ -161,7 +161,7 @@
__le16 reason) {
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 +
- sdata->u.mesh.vendor_ie_len);
+ sdata->u.mesh.ie_len);
struct ieee80211_mgmt *mgmt;
bool include_plid = false;
static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A };
@@ -181,8 +181,8 @@
IEEE80211_STYPE_ACTION);
memcpy(mgmt->da, da, ETH_ALEN);
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
- /* BSSID is left zeroed, wildcard value */
- mgmt->u.action.category = WLAN_CATEGORY_MESH_PLINK;
+ memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
+ mgmt->u.action.category = WLAN_CATEGORY_MESH_ACTION;
mgmt->u.action.u.plink_action.action_code = action;
if (action == PLINK_CLOSE)
@@ -237,8 +237,9 @@
return 0;
}
-void mesh_neighbour_update(u8 *hw_addr, u32 rates, struct ieee80211_sub_if_data *sdata,
- bool peer_accepting_plinks)
+void mesh_neighbour_update(u8 *hw_addr, u32 rates,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee802_11_elems *elems)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
@@ -248,8 +249,14 @@
sta = sta_info_get(sdata, hw_addr);
if (!sta) {
rcu_read_unlock();
-
- sta = mesh_plink_alloc(sdata, hw_addr, rates);
+ /* Userspace handles peer allocation when security is enabled
+ * */
+ if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED)
+ cfg80211_notify_new_peer_candidate(sdata->dev, hw_addr,
+ elems->ie_start, elems->total_len,
+ GFP_KERNEL);
+ else
+ sta = mesh_plink_alloc(sdata, hw_addr, rates);
if (!sta)
return;
if (sta_info_insert_rcu(sta)) {
@@ -260,7 +267,8 @@
sta->last_rx = jiffies;
sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
- if (peer_accepting_plinks && sta->plink_state == PLINK_LISTEN &&
+ if (mesh_peer_accepts_plinks(elems) &&
+ sta->plink_state == NL80211_PLINK_LISTEN &&
sdata->u.mesh.accepting_plinks &&
sdata->u.mesh.mshcfg.auto_open_plinks)
mesh_plink_open(sta);
@@ -300,8 +308,8 @@
sdata = sta->sdata;
switch (sta->plink_state) {
- case PLINK_OPN_RCVD:
- case PLINK_OPN_SNT:
+ case NL80211_PLINK_OPN_RCVD:
+ case NL80211_PLINK_OPN_SNT:
/* retry timer */
if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
u32 rand;
@@ -320,17 +328,17 @@
}
reason = cpu_to_le16(MESH_MAX_RETRIES);
/* fall through on else */
- case PLINK_CNF_RCVD:
+ case NL80211_PLINK_CNF_RCVD:
/* confirm timer */
if (!reason)
reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
- sta->plink_state = PLINK_HOLDING;
+ sta->plink_state = NL80211_PLINK_HOLDING;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
spin_unlock_bh(&sta->lock);
mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
reason);
break;
- case PLINK_HOLDING:
+ case NL80211_PLINK_HOLDING:
/* holding timer */
del_timer(&sta->plink_timer);
mesh_plink_fsm_restart(sta);
@@ -372,14 +380,17 @@
__le16 llid;
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ if (!test_sta_flags(sta, WLAN_STA_AUTH))
+ return -EPERM;
+
spin_lock_bh(&sta->lock);
get_random_bytes(&llid, 2);
sta->llid = llid;
- if (sta->plink_state != PLINK_LISTEN) {
+ if (sta->plink_state != NL80211_PLINK_LISTEN) {
spin_unlock_bh(&sta->lock);
return -EBUSY;
}
- sta->plink_state = PLINK_OPN_SNT;
+ sta->plink_state = NL80211_PLINK_OPN_SNT;
mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
spin_unlock_bh(&sta->lock);
mpl_dbg("Mesh plink: starting establishment with %pM\n",
@@ -396,7 +407,7 @@
spin_lock_bh(&sta->lock);
deactivated = __mesh_plink_deactivate(sta);
- sta->plink_state = PLINK_BLOCKED;
+ sta->plink_state = NL80211_PLINK_BLOCKED;
spin_unlock_bh(&sta->lock);
if (deactivated)
@@ -419,13 +430,13 @@
__le16 plid, llid, reason;
#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
static const char *mplstates[] = {
- [PLINK_LISTEN] = "LISTEN",
- [PLINK_OPN_SNT] = "OPN-SNT",
- [PLINK_OPN_RCVD] = "OPN-RCVD",
- [PLINK_CNF_RCVD] = "CNF_RCVD",
- [PLINK_ESTAB] = "ESTAB",
- [PLINK_HOLDING] = "HOLDING",
- [PLINK_BLOCKED] = "BLOCKED"
+ [NL80211_PLINK_LISTEN] = "LISTEN",
+ [NL80211_PLINK_OPN_SNT] = "OPN-SNT",
+ [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD",
+ [NL80211_PLINK_CNF_RCVD] = "CNF_RCVD",
+ [NL80211_PLINK_ESTAB] = "ESTAB",
+ [NL80211_PLINK_HOLDING] = "HOLDING",
+ [NL80211_PLINK_BLOCKED] = "BLOCKED"
};
#endif
@@ -449,6 +460,11 @@
mpl_dbg("Mesh plink: missing necessary peer link ie\n");
return;
}
+ if (elems.rsn_len &&
+ sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
+ mpl_dbg("Mesh plink: can't establish link with secure peer\n");
+ return;
+ }
ftype = mgmt->u.action.u.plink_action.action_code;
ie_len = elems.peer_link_len;
@@ -480,7 +496,13 @@
return;
}
- if (sta && sta->plink_state == PLINK_BLOCKED) {
+ if (sta && !test_sta_flags(sta, WLAN_STA_AUTH)) {
+ mpl_dbg("Mesh plink: Action frame from non-authed peer\n");
+ rcu_read_unlock();
+ return;
+ }
+
+ if (sta && sta->plink_state == NL80211_PLINK_BLOCKED) {
rcu_read_unlock();
return;
}
@@ -550,7 +572,7 @@
event = CNF_ACPT;
break;
case PLINK_CLOSE:
- if (sta->plink_state == PLINK_ESTAB)
+ if (sta->plink_state == NL80211_PLINK_ESTAB)
/* Do not check for llid or plid. This does not
* follow the standard but since multiple plinks
* per sta are not supported, it is necessary in
@@ -585,14 +607,14 @@
reason = 0;
switch (sta->plink_state) {
/* spin_unlock as soon as state is updated at each case */
- case PLINK_LISTEN:
+ case NL80211_PLINK_LISTEN:
switch (event) {
case CLS_ACPT:
mesh_plink_fsm_restart(sta);
spin_unlock_bh(&sta->lock);
break;
case OPN_ACPT:
- sta->plink_state = PLINK_OPN_RCVD;
+ sta->plink_state = NL80211_PLINK_OPN_RCVD;
sta->plid = plid;
get_random_bytes(&llid, 2);
sta->llid = llid;
@@ -609,7 +631,7 @@
}
break;
- case PLINK_OPN_SNT:
+ case NL80211_PLINK_OPN_SNT:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
@@ -618,7 +640,7 @@
if (!reason)
reason = cpu_to_le16(MESH_CLOSE_RCVD);
sta->reason = reason;
- sta->plink_state = PLINK_HOLDING;
+ sta->plink_state = NL80211_PLINK_HOLDING;
if (!mod_plink_timer(sta,
dot11MeshHoldingTimeout(sdata)))
sta->ignore_plink_timer = true;
@@ -630,7 +652,7 @@
break;
case OPN_ACPT:
/* retry timer is left untouched */
- sta->plink_state = PLINK_OPN_RCVD;
+ sta->plink_state = NL80211_PLINK_OPN_RCVD;
sta->plid = plid;
llid = sta->llid;
spin_unlock_bh(&sta->lock);
@@ -638,7 +660,7 @@
plid, 0);
break;
case CNF_ACPT:
- sta->plink_state = PLINK_CNF_RCVD;
+ sta->plink_state = NL80211_PLINK_CNF_RCVD;
if (!mod_plink_timer(sta,
dot11MeshConfirmTimeout(sdata)))
sta->ignore_plink_timer = true;
@@ -651,7 +673,7 @@
}
break;
- case PLINK_OPN_RCVD:
+ case NL80211_PLINK_OPN_RCVD:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
@@ -660,7 +682,7 @@
if (!reason)
reason = cpu_to_le16(MESH_CLOSE_RCVD);
sta->reason = reason;
- sta->plink_state = PLINK_HOLDING;
+ sta->plink_state = NL80211_PLINK_HOLDING;
if (!mod_plink_timer(sta,
dot11MeshHoldingTimeout(sdata)))
sta->ignore_plink_timer = true;
@@ -678,7 +700,7 @@
break;
case CNF_ACPT:
del_timer(&sta->plink_timer);
- sta->plink_state = PLINK_ESTAB;
+ sta->plink_state = NL80211_PLINK_ESTAB;
spin_unlock_bh(&sta->lock);
mesh_plink_inc_estab_count(sdata);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
@@ -691,7 +713,7 @@
}
break;
- case PLINK_CNF_RCVD:
+ case NL80211_PLINK_CNF_RCVD:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
@@ -700,7 +722,7 @@
if (!reason)
reason = cpu_to_le16(MESH_CLOSE_RCVD);
sta->reason = reason;
- sta->plink_state = PLINK_HOLDING;
+ sta->plink_state = NL80211_PLINK_HOLDING;
if (!mod_plink_timer(sta,
dot11MeshHoldingTimeout(sdata)))
sta->ignore_plink_timer = true;
@@ -712,7 +734,7 @@
break;
case OPN_ACPT:
del_timer(&sta->plink_timer);
- sta->plink_state = PLINK_ESTAB;
+ sta->plink_state = NL80211_PLINK_ESTAB;
spin_unlock_bh(&sta->lock);
mesh_plink_inc_estab_count(sdata);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
@@ -727,13 +749,13 @@
}
break;
- case PLINK_ESTAB:
+ case NL80211_PLINK_ESTAB:
switch (event) {
case CLS_ACPT:
reason = cpu_to_le16(MESH_CLOSE_RCVD);
sta->reason = reason;
deactivated = __mesh_plink_deactivate(sta);
- sta->plink_state = PLINK_HOLDING;
+ sta->plink_state = NL80211_PLINK_HOLDING;
llid = sta->llid;
mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
spin_unlock_bh(&sta->lock);
@@ -753,7 +775,7 @@
break;
}
break;
- case PLINK_HOLDING:
+ case NL80211_PLINK_HOLDING:
switch (event) {
case CLS_ACPT:
if (del_timer(&sta->plink_timer))
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 64d92d5a..4f6b267 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -90,20 +90,11 @@
/* no action required */
RX_MGMT_NONE,
- /* caller must call cfg80211_send_rx_auth() */
- RX_MGMT_CFG80211_AUTH,
-
- /* caller must call cfg80211_send_rx_assoc() */
- RX_MGMT_CFG80211_ASSOC,
-
/* caller must call cfg80211_send_deauth() */
RX_MGMT_CFG80211_DEAUTH,
/* caller must call cfg80211_send_disassoc() */
RX_MGMT_CFG80211_DISASSOC,
-
- /* caller must tell cfg80211 about internal error */
- RX_MGMT_CFG80211_ASSOC_ERROR,
};
/* utils */
@@ -759,6 +750,8 @@
dynamic_ps_enable_work);
struct ieee80211_sub_if_data *sdata = local->ps_sdata;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ unsigned long flags;
+ int q;
/* can only happen when PS was just disabled anyway */
if (!sdata)
@@ -767,18 +760,37 @@
if (local->hw.conf.flags & IEEE80211_CONF_PS)
return;
+ /*
+ * transmission can be stopped by others which leads to
+ * dynamic_ps_timer expiry. Postpond the ps timer if it
+ * is not the actual idle state.
+ */
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ for (q = 0; q < local->hw.queues; q++) {
+ if (local->queue_stop_reasons[q]) {
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock,
+ flags);
+ mod_timer(&local->dynamic_ps_timer, jiffies +
+ msecs_to_jiffies(
+ local->hw.conf.dynamic_ps_timeout));
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
(!(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED))) {
netif_tx_stop_all_queues(sdata->dev);
- /*
- * Flush all the frames queued in the driver before
- * going to power save
- */
- drv_flush(local, false);
- ieee80211_send_nullfunc(local, sdata, 1);
- /* Flush once again to get the tx status of nullfunc frame */
- drv_flush(local, false);
+ if (drv_tx_frames_pending(local))
+ mod_timer(&local->dynamic_ps_timer, jiffies +
+ msecs_to_jiffies(
+ local->hw.conf.dynamic_ps_timeout));
+ else {
+ ieee80211_send_nullfunc(local, sdata, 1);
+ /* Flush to get the tx status of nullfunc frame */
+ drv_flush(local, false);
+ }
}
if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
@@ -789,7 +801,7 @@
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
- netif_tx_start_all_queues(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
void ieee80211_dynamic_ps_timer(unsigned long data)
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index e373551..730778a 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -6,7 +6,7 @@
#include "driver-ops.h"
#include "led.h"
-int __ieee80211_suspend(struct ieee80211_hw *hw)
+int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
@@ -14,12 +14,23 @@
ieee80211_scan_cancel(local);
+ if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
+ mutex_lock(&local->sta_mtx);
+ list_for_each_entry(sta, &local->sta_list, list) {
+ set_sta_flags(sta, WLAN_STA_BLOCK_BA);
+ ieee80211_sta_tear_down_BA_sessions(sta, true);
+ }
+ mutex_unlock(&local->sta_mtx);
+ }
+
ieee80211_stop_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
/* flush out all packets */
synchronize_net();
+ drv_flush(local, false);
+
local->quiescing = true;
/* make quiescing visible to timers everywhere */
mb();
@@ -36,6 +47,16 @@
cancel_work_sync(&local->dynamic_ps_enable_work);
del_timer_sync(&local->dynamic_ps_timer);
+ local->wowlan = wowlan && local->open_count;
+ if (local->wowlan) {
+ int err = drv_suspend(local, wowlan);
+ if (err) {
+ local->quiescing = false;
+ return err;
+ }
+ goto suspend;
+ }
+
/* disable keys */
list_for_each_entry(sdata, &local->interfaces, list)
ieee80211_disable_keys(sdata);
@@ -43,11 +64,6 @@
/* tear down aggregation sessions and remove STAs */
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list) {
- if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
- set_sta_flags(sta, WLAN_STA_BLOCK_BA);
- ieee80211_sta_tear_down_BA_sessions(sta, true);
- }
-
if (sta->uploaded) {
sdata = sta->sdata;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
@@ -98,6 +114,7 @@
if (local->open_count)
ieee80211_stop_device(local);
+ suspend:
local->suspended = true;
/* need suspended to be visible before quiescing is false */
barrier();
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 778c604..8adac67 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -417,8 +417,8 @@
tx_time_single = mr->ack_time + mr->perfect_tx_time;
/* contention window */
- tx_time_single += t_slot + min(cw, mp->cw_max);
- cw = (cw << 1) | 1;
+ tx_time_single += (t_slot * cw) >> 1;
+ cw = min((cw << 1) | 1, mp->cw_max);
tx_time += tx_time_single;
tx_time_cts += tx_time_single + mi->sp_ack_dur;
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index c06aa3a..333b511 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -464,6 +464,7 @@
const struct mcs_group *group;
unsigned int tx_time, tx_time_rtscts, tx_time_data;
unsigned int cw = mp->cw_min;
+ unsigned int ctime = 0;
unsigned int t_slot = 9; /* FIXME */
unsigned int ampdu_len = MINSTREL_TRUNC(mi->avg_ampdu_len);
@@ -480,13 +481,27 @@
group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
tx_time_data = group->duration[index % MCS_GROUP_RATES] * ampdu_len;
- tx_time = 2 * (t_slot + mi->overhead + tx_time_data);
- tx_time_rtscts = 2 * (t_slot + mi->overhead_rtscts + tx_time_data);
+
+ /* Contention time for first 2 tries */
+ ctime = (t_slot * cw) >> 1;
+ cw = min((cw << 1) | 1, mp->cw_max);
+ ctime += (t_slot * cw) >> 1;
+ cw = min((cw << 1) | 1, mp->cw_max);
+
+ /* Total TX time for data and Contention after first 2 tries */
+ tx_time = ctime + 2 * (mi->overhead + tx_time_data);
+ tx_time_rtscts = ctime + 2 * (mi->overhead_rtscts + tx_time_data);
+
+ /* See how many more tries we can fit inside segment size */
do {
- cw = (cw << 1) | 1;
- cw = min(cw, mp->cw_max);
- tx_time += cw + t_slot + mi->overhead;
- tx_time_rtscts += cw + t_slot + mi->overhead_rtscts;
+ /* Contention time for this try */
+ ctime = (t_slot * cw) >> 1;
+ cw = min((cw << 1) | 1, mp->cw_max);
+
+ /* Total TX time after this try */
+ tx_time += ctime + mi->overhead + tx_time_data;
+ tx_time_rtscts += ctime + mi->overhead_rtscts + tx_time_data;
+
if (tx_time_rtscts < mp->segment_size)
mr->retry_count_rtscts++;
} while ((tx_time < mp->segment_size) &&
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c5d4530..7fa8c6b 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -143,7 +143,8 @@
if (status->flag & RX_FLAG_HT) {
/*
* MCS information is a separate field in radiotap,
- * added below.
+ * added below. The byte here is needed as padding
+ * for the channel though, so initialise it to 0.
*/
*pos = 0;
} else {
@@ -403,11 +404,13 @@
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
struct sk_buff *skb = rx->skb;
- if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN)))
+ if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
+ !local->sched_scanning))
return RX_CONTINUE;
if (test_bit(SCAN_HW_SCANNING, &local->scanning) ||
- test_bit(SCAN_SW_SCANNING, &local->scanning))
+ test_bit(SCAN_SW_SCANNING, &local->scanning) ||
+ local->sched_scanning)
return ieee80211_scan_rx(rx->sdata, skb);
/* scanning finished during invoking of handlers */
@@ -487,22 +490,26 @@
* establisment frame, beacon or probe, drop the frame.
*/
- if (!rx->sta || sta_plink_state(rx->sta) != PLINK_ESTAB) {
+ if (!rx->sta || sta_plink_state(rx->sta) != NL80211_PLINK_ESTAB) {
struct ieee80211_mgmt *mgmt;
if (!ieee80211_is_mgmt(hdr->frame_control))
return RX_DROP_MONITOR;
if (ieee80211_is_action(hdr->frame_control)) {
+ u8 category;
mgmt = (struct ieee80211_mgmt *)hdr;
- if (mgmt->u.action.category != WLAN_CATEGORY_MESH_PLINK)
+ category = mgmt->u.action.category;
+ if (category != WLAN_CATEGORY_MESH_ACTION &&
+ category != WLAN_CATEGORY_SELF_PROTECTED)
return RX_DROP_MONITOR;
return RX_CONTINUE;
}
if (ieee80211_is_probe_req(hdr->frame_control) ||
ieee80211_is_probe_resp(hdr->frame_control) ||
- ieee80211_is_beacon(hdr->frame_control))
+ ieee80211_is_beacon(hdr->frame_control) ||
+ ieee80211_is_auth(hdr->frame_control))
return RX_CONTINUE;
return RX_DROP_MONITOR;
@@ -650,7 +657,7 @@
set_release_timer:
mod_timer(&tid_agg_rx->reorder_timer,
- tid_agg_rx->reorder_time[j] +
+ tid_agg_rx->reorder_time[j] + 1 +
HT_RX_REORDER_BUF_TIMEOUT);
} else {
del_timer(&tid_agg_rx->reorder_timer);
@@ -707,6 +714,8 @@
/*
* If the current MPDU is in the right order and nothing else
* is stored we can process it directly, no need to buffer it.
+ * If it is first but there's something stored, we may be able
+ * to release frames after this one.
*/
if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
tid_agg_rx->stored_mpdu_num == 0) {
@@ -1583,7 +1592,7 @@
}
static int
-__ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
+__ieee80211_data_to_8023(struct ieee80211_rx_data *rx, bool *port_control)
{
struct ieee80211_sub_if_data *sdata = rx->sdata;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
@@ -1591,6 +1600,7 @@
struct ethhdr *ehdr;
int ret;
+ *port_control = false;
if (ieee80211_has_a4(hdr->frame_control) &&
sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta)
return -1;
@@ -1609,11 +1619,13 @@
return -1;
ret = ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type);
- if (ret < 0 || !check_port_control)
+ if (ret < 0)
return ret;
ehdr = (struct ethhdr *) rx->skb->data;
- if (ehdr->h_proto != rx->sdata->control_port_protocol)
+ if (ehdr->h_proto == rx->sdata->control_port_protocol)
+ *port_control = true;
+ else if (check_port_control)
return -1;
return 0;
@@ -1771,7 +1783,7 @@
ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
rx->sdata->vif.type,
- rx->local->hw.extra_tx_headroom);
+ rx->local->hw.extra_tx_headroom, true);
while (!skb_queue_empty(&frame_list)) {
rx->skb = __skb_dequeue(&frame_list);
@@ -1914,6 +1926,7 @@
struct net_device *dev = sdata->dev;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
__le16 fc = hdr->frame_control;
+ bool port_control;
int err;
if (unlikely(!ieee80211_is_data(hdr->frame_control)))
@@ -1930,13 +1943,21 @@
sdata->vif.type == NL80211_IFTYPE_AP)
return RX_DROP_MONITOR;
- err = __ieee80211_data_to_8023(rx);
+ err = __ieee80211_data_to_8023(rx, &port_control);
if (unlikely(err))
return RX_DROP_UNUSABLE;
if (!ieee80211_frame_allowed(rx, fc))
return RX_DROP_MONITOR;
+ if (rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
+ unlikely(port_control) && sdata->bss) {
+ sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
+ u.ap);
+ dev = sdata->dev;
+ rx->sdata = sdata;
+ }
+
rx->skb->dev = dev;
dev->stats.rx_packets++;
@@ -2189,7 +2210,7 @@
goto handled;
}
break;
- case WLAN_CATEGORY_MESH_PLINK:
+ case WLAN_CATEGORY_MESH_ACTION:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
goto queue;
@@ -2352,47 +2373,6 @@
return RX_QUEUED;
}
-static void ieee80211_rx_michael_mic_report(struct ieee80211_hdr *hdr,
- struct ieee80211_rx_data *rx)
-{
- int keyidx;
- unsigned int hdrlen;
-
- hdrlen = ieee80211_hdrlen(hdr->frame_control);
- if (rx->skb->len >= hdrlen + 4)
- keyidx = rx->skb->data[hdrlen + 3] >> 6;
- else
- keyidx = -1;
-
- if (!rx->sta) {
- /*
- * Some hardware seem to generate incorrect Michael MIC
- * reports; ignore them to avoid triggering countermeasures.
- */
- return;
- }
-
- if (!ieee80211_has_protected(hdr->frame_control))
- return;
-
- if (rx->sdata->vif.type == NL80211_IFTYPE_AP && keyidx) {
- /*
- * APs with pairwise keys should never receive Michael MIC
- * errors for non-zero keyidx because these are reserved for
- * group keys and only the AP is sending real multicast
- * frames in the BSS.
- */
- return;
- }
-
- if (!ieee80211_is_data(hdr->frame_control) &&
- !ieee80211_is_auth(hdr->frame_control))
- return;
-
- mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL,
- GFP_ATOMIC);
-}
-
/* TODO: use IEEE80211_RX_FRAGMENTED */
static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx,
struct ieee80211_rate *rate)
@@ -2736,12 +2716,6 @@
if (!prepares)
return false;
- if (status->flag & RX_FLAG_MMIC_ERROR) {
- if (status->rx_flags & IEEE80211_RX_RA_MATCH)
- ieee80211_rx_michael_mic_report(hdr, rx);
- return false;
- }
-
if (!consume) {
skb = skb_copy(skb, GFP_ATOMIC);
if (!skb) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 489b6ad..d20046b 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -15,6 +15,7 @@
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
#include <linux/pm_qos_params.h>
+#include <linux/slab.h>
#include <net/sch_generic.h>
#include <linux/slab.h>
#include <net/mac80211.h>
@@ -170,7 +171,7 @@
return RX_CONTINUE;
if (skb->len < 24)
- return RX_DROP_MONITOR;
+ return RX_CONTINUE;
presp = ieee80211_is_probe_resp(fc);
if (presp) {
@@ -850,3 +851,122 @@
}
mutex_unlock(&local->mtx);
}
+
+int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_sched_scan_request *req)
+{
+ struct ieee80211_local *local = sdata->local;
+ int ret, i;
+
+ mutex_lock(&sdata->local->mtx);
+
+ if (local->sched_scanning) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (!local->ops->sched_scan_start) {
+ ret = -ENOTSUPP;
+ goto out;
+ }
+
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+ local->sched_scan_ies.ie[i] = kzalloc(2 +
+ IEEE80211_MAX_SSID_LEN +
+ local->scan_ies_len,
+ GFP_KERNEL);
+ if (!local->sched_scan_ies.ie[i]) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ local->sched_scan_ies.len[i] =
+ ieee80211_build_preq_ies(local,
+ local->sched_scan_ies.ie[i],
+ req->ie, req->ie_len, i,
+ (u32) -1, 0);
+ }
+
+ ret = drv_sched_scan_start(local, sdata, req,
+ &local->sched_scan_ies);
+ if (ret == 0) {
+ local->sched_scanning = true;
+ goto out;
+ }
+
+out_free:
+ while (i > 0)
+ kfree(local->sched_scan_ies.ie[--i]);
+out:
+ mutex_unlock(&sdata->local->mtx);
+ return ret;
+}
+
+int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ int ret = 0, i;
+
+ mutex_lock(&sdata->local->mtx);
+
+ if (!local->ops->sched_scan_stop) {
+ ret = -ENOTSUPP;
+ goto out;
+ }
+
+ if (local->sched_scanning) {
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+ kfree(local->sched_scan_ies.ie[i]);
+
+ drv_sched_scan_stop(local, sdata);
+ local->sched_scanning = false;
+ }
+out:
+ mutex_unlock(&sdata->local->mtx);
+
+ return ret;
+}
+
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ trace_api_sched_scan_results(local);
+
+ cfg80211_sched_scan_results(hw->wiphy);
+}
+EXPORT_SYMBOL(ieee80211_sched_scan_results);
+
+void ieee80211_sched_scan_stopped_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local,
+ sched_scan_stopped_work);
+ int i;
+
+ mutex_lock(&local->mtx);
+
+ if (!local->sched_scanning) {
+ mutex_unlock(&local->mtx);
+ return;
+ }
+
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+ kfree(local->sched_scan_ies.ie[i]);
+
+ local->sched_scanning = false;
+
+ mutex_unlock(&local->mtx);
+
+ cfg80211_sched_scan_stopped(local->hw.wiphy);
+}
+
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ trace_api_sched_scan_stopped(local);
+
+ ieee80211_queue_work(&local->hw, &local->sched_scan_stopped_work);
+}
+EXPORT_SYMBOL(ieee80211_sched_scan_stopped);
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 13e8c30..b83870b 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -67,7 +67,8 @@
{
struct sta_info *s;
- s = local->sta_hash[STA_HASH(sta->sta.addr)];
+ s = rcu_dereference_protected(local->sta_hash[STA_HASH(sta->sta.addr)],
+ lockdep_is_held(&local->sta_lock));
if (!s)
return -ENOENT;
if (s == sta) {
@@ -76,9 +77,11 @@
return 0;
}
- while (s->hnext && s->hnext != sta)
- s = s->hnext;
- if (s->hnext) {
+ while (rcu_access_pointer(s->hnext) &&
+ rcu_access_pointer(s->hnext) != sta)
+ s = rcu_dereference_protected(s->hnext,
+ lockdep_is_held(&local->sta_lock));
+ if (rcu_access_pointer(s->hnext)) {
rcu_assign_pointer(s->hnext, sta->hnext);
return 0;
}
@@ -228,6 +231,7 @@
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
+ struct timespec uptime;
int i;
sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
@@ -245,6 +249,8 @@
sta->sdata = sdata;
sta->last_rx = jiffies;
+ do_posix_clock_monotonic_gettime(&uptime);
+ sta->last_connected = uptime.tv_sec;
ewma_init(&sta->avg_signal, 1024, 8);
if (sta_prepare_rate_control(local, sta, gfp)) {
@@ -271,7 +277,7 @@
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
#ifdef CONFIG_MAC80211_MESH
- sta->plink_state = PLINK_LISTEN;
+ sta->plink_state = NL80211_PLINK_LISTEN;
init_timer(&sta->plink_timer);
#endif
@@ -584,7 +590,6 @@
{
unsigned long flags;
struct sk_buff *skb;
- struct ieee80211_sub_if_data *sdata;
if (skb_queue_empty(&sta->ps_tx_buf))
return false;
@@ -601,7 +606,6 @@
if (!skb)
break;
- sdata = sta->sdata;
local->total_ps_buffered--;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "Buffered frame expired (STA %pM)\n",
@@ -609,7 +613,8 @@
#endif
dev_kfree_skb(skb);
- if (skb_queue_empty(&sta->ps_tx_buf))
+ if (skb_queue_empty(&sta->ps_tx_buf) &&
+ !test_sta_flags(sta, WLAN_STA_PS_DRIVER_BUF))
sta_info_clear_tim_bit(sta);
}
@@ -650,10 +655,12 @@
if (ret)
return ret;
+ mutex_lock(&local->key_mtx);
for (i = 0; i < NUM_DEFAULT_KEYS; i++)
- ieee80211_key_free(local, sta->gtk[i]);
+ __ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i]));
if (sta->ptk)
- ieee80211_key_free(local, sta->ptk);
+ __ieee80211_key_free(key_mtx_dereference(local, sta->ptk));
+ mutex_unlock(&local->key_mtx);
sta->dead = true;
@@ -698,6 +705,8 @@
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
cancel_work_sync(&sta->drv_unblock_wk);
+ cfg80211_del_sta(sdata->dev, sta->sta.addr, GFP_KERNEL);
+
rate_control_remove_sta_debugfs(sta);
ieee80211_sta_debugfs_remove(sta);
@@ -766,9 +775,8 @@
if (!timer_needed)
return;
- local->sta_cleanup.expires =
- round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
- add_timer(&local->sta_cleanup);
+ mod_timer(&local->sta_cleanup,
+ round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL));
}
void sta_info_init(struct ieee80211_local *local)
@@ -781,14 +789,6 @@
setup_timer(&local->sta_cleanup, sta_info_cleanup,
(unsigned long)local);
- local->sta_cleanup.expires =
- round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
-}
-
-int sta_info_start(struct ieee80211_local *local)
-{
- add_timer(&local->sta_cleanup);
- return 0;
}
void sta_info_stop(struct ieee80211_local *local)
@@ -900,6 +900,7 @@
struct ieee80211_local *local = sdata->local;
int sent, buffered;
+ clear_sta_flags(sta, WLAN_STA_PS_DRIVER_BUF);
if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta);
@@ -992,3 +993,12 @@
ieee80211_queue_work(hw, &sta->drv_unblock_wk);
}
EXPORT_SYMBOL(ieee80211_sta_block_awake);
+
+void ieee80211_sta_set_tim(struct ieee80211_sta *pubsta)
+{
+ struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+
+ set_sta_flags(sta, WLAN_STA_PS_DRIVER_BUF);
+ sta_info_set_tim_bit(sta);
+}
+EXPORT_SYMBOL(ieee80211_sta_set_tim);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index b2f9596..c6ae871 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -43,6 +43,8 @@
* be in the queues
* @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
* station in power-save mode, reply when the driver unblocks.
+ * @WLAN_STA_PS_DRIVER_BUF: Station has frames pending in driver internal
+ * buffers. Automatically cleared on station wake-up.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH = 1<<0,
@@ -58,6 +60,7 @@
WLAN_STA_BLOCK_BA = 1<<11,
WLAN_STA_PS_DRIVER = 1<<12,
WLAN_STA_PSPOLL = 1<<13,
+ WLAN_STA_PS_DRIVER_BUF = 1<<14,
};
#define STA_TID_NUM 16
@@ -149,6 +152,7 @@
*
* @tid_rx: aggregation info for Rx per TID -- RCU protected
* @tid_tx: aggregation info for Tx per TID
+ * @tid_start_tx: sessions where start was requested
* @addba_req_num: number of times addBA request has been sent.
* @dialog_token_allocator: dialog token enumerator for each new session;
* @work: work struct for starting/stopping aggregation
@@ -160,40 +164,18 @@
struct sta_ampdu_mlme {
struct mutex mtx;
/* rx */
- struct tid_ampdu_rx *tid_rx[STA_TID_NUM];
+ struct tid_ampdu_rx __rcu *tid_rx[STA_TID_NUM];
unsigned long tid_rx_timer_expired[BITS_TO_LONGS(STA_TID_NUM)];
/* tx */
struct work_struct work;
- struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
+ struct tid_ampdu_tx __rcu *tid_tx[STA_TID_NUM];
+ struct tid_ampdu_tx *tid_start_tx[STA_TID_NUM];
u8 addba_req_num[STA_TID_NUM];
u8 dialog_token_allocator;
};
/**
- * enum plink_state - state of a mesh peer link finite state machine
- *
- * @PLINK_LISTEN: initial state, considered the implicit state of non existent
- * mesh peer links
- * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh peer
- * @PLINK_OPN_RCVD: mesh plink open frame has been received from this mesh peer
- * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from this mesh
- * peer
- * @PLINK_ESTAB: mesh peer link is established
- * @PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @PLINK_BLOCKED: all frames transmitted from this mesh plink are discarded
- */
-enum plink_state {
- PLINK_LISTEN,
- PLINK_OPN_SNT,
- PLINK_OPN_RCVD,
- PLINK_CNF_RCVD,
- PLINK_ESTAB,
- PLINK_HOLDING,
- PLINK_BLOCKED
-};
-
-/**
* struct sta_info - STA information
*
* This structure collects information about a station that
@@ -226,6 +208,7 @@
* @rx_bytes: Number of bytes received from this STA
* @wep_weak_iv_count: number of weak WEP IVs received from this station
* @last_rx: time (in jiffies) when last frame was received from this STA
+ * @last_connected: time (in seconds) when a station got connected
* @num_duplicates: number of duplicate frames received from this STA
* @rx_fragments: number of received MPDUs
* @rx_dropped: number of dropped MPDUs from this STA
@@ -260,11 +243,11 @@
struct sta_info {
/* General information, mostly static */
struct list_head list;
- struct sta_info *hnext;
+ struct sta_info __rcu *hnext;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_key *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
- struct ieee80211_key *ptk;
+ struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
+ struct ieee80211_key __rcu *ptk;
struct rate_control_ref *rate_ctrl;
void *rate_ctrl_priv;
spinlock_t lock;
@@ -295,6 +278,7 @@
unsigned long rx_packets, rx_bytes;
unsigned long wep_weak_iv_count;
unsigned long last_rx;
+ long last_connected;
unsigned long num_duplicates;
unsigned long rx_fragments;
unsigned long rx_dropped;
@@ -334,7 +318,7 @@
u8 plink_retries;
bool ignore_plink_timer;
bool plink_timer_was_running;
- enum plink_state plink_state;
+ enum nl80211_plink_state plink_state;
u32 plink_timeout;
struct timer_list plink_timer;
#endif
@@ -352,12 +336,12 @@
struct ieee80211_sta sta;
};
-static inline enum plink_state sta_plink_state(struct sta_info *sta)
+static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
{
#ifdef CONFIG_MAC80211_MESH
return sta->plink_state;
#endif
- return PLINK_LISTEN;
+ return NL80211_PLINK_LISTEN;
}
static inline void set_sta_flags(struct sta_info *sta, const u32 flags)
@@ -416,7 +400,16 @@
return ret;
}
+void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
+ struct tid_ampdu_tx *tid_tx);
+static inline struct tid_ampdu_tx *
+rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid)
+{
+ return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid],
+ lockdep_is_held(&sta->lock) ||
+ lockdep_is_held(&sta->ampdu_mlme.mtx));
+}
#define STA_HASH_SIZE 256
#define STA_HASH(sta) (sta[5])
@@ -497,7 +490,6 @@
void sta_info_clear_tim_bit(struct sta_info *sta);
void sta_info_init(struct ieee80211_local *local);
-int sta_info_start(struct ieee80211_local *local);
void sta_info_stop(struct ieee80211_local *local);
int sta_info_flush(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index b936dd2..1658efa 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -189,16 +189,19 @@
bool acked;
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
- /* the HW cannot have attempted that rate */
- if (i >= hw->max_report_rates) {
+ if (info->status.rates[i].idx < 0) {
+ break;
+ } else if (i >= hw->max_report_rates) {
+ /* the HW cannot have attempted that rate */
info->status.rates[i].idx = -1;
info->status.rates[i].count = 0;
- } else if (info->status.rates[i].idx >= 0) {
- rates_idx = i;
+ break;
}
retry_count += info->status.rates[i].count;
}
+ rates_idx = i - 1;
+
if (retry_count < 0)
retry_count = 0;
@@ -443,3 +446,11 @@
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
+
+void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets)
+{
+ struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+ cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr,
+ num_packets, GFP_ATOMIC);
+}
+EXPORT_SYMBOL(ieee80211_report_low_ack);
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index e840c9c..757e4eb 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -202,7 +202,7 @@
* @payload_len is the length of payload (_not_ including IV/ICV length).
* @ta is the transmitter addresses.
*/
-int ieee80211_tkip_encrypt_data(struct crypto_blkcipher *tfm,
+int ieee80211_tkip_encrypt_data(struct crypto_cipher *tfm,
struct ieee80211_key *key,
u8 *pos, size_t payload_len, u8 *ta)
{
@@ -223,7 +223,7 @@
* beginning of the buffer containing IEEE 802.11 header payload, i.e.,
* including IV, Ext. IV, real data, Michael MIC, ICV. @payload_len is the
* length of payload, including IV, Ext. IV, MIC, ICV. */
-int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm,
+int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
struct ieee80211_key *key,
u8 *payload, size_t payload_len, u8 *ta,
u8 *ra, int only_iv, int queue,
diff --git a/net/mac80211/tkip.h b/net/mac80211/tkip.h
index 7e83dee..1cab9c8 100644
--- a/net/mac80211/tkip.h
+++ b/net/mac80211/tkip.h
@@ -15,7 +15,7 @@
u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key, u16 iv16);
-int ieee80211_tkip_encrypt_data(struct crypto_blkcipher *tfm,
+int ieee80211_tkip_encrypt_data(struct crypto_cipher *tfm,
struct ieee80211_key *key,
u8 *pos, size_t payload_len, u8 *ta);
enum {
@@ -24,7 +24,7 @@
TKIP_DECRYPT_INVALID_KEYIDX = -2,
TKIP_DECRYPT_REPLAY = -3,
};
-int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm,
+int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
struct ieee80211_key *key,
u8 *payload, size_t payload_len, u8 *ta,
u8 *ra, int only_iv, int queue,
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index ce4596e..64e0f75 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -237,6 +237,10 @@
&local->dynamic_ps_disable_work);
}
+ /* Don't restart the timer if we're not disassociated */
+ if (!ifmgd->associated)
+ return TX_CONTINUE;
+
mod_timer(&local->dynamic_ps_timer, jiffies +
msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
@@ -1036,14 +1040,11 @@
struct ieee80211_radiotap_iterator iterator;
struct ieee80211_radiotap_header *rthdr =
(struct ieee80211_radiotap_header *) skb->data;
- struct ieee80211_supported_band *sband;
bool hw_frag;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len,
NULL);
- sband = tx->local->hw.wiphy->bands[tx->channel->band];
-
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
tx->flags &= ~IEEE80211_TX_FRAGMENTED;
@@ -1150,7 +1151,7 @@
* packet pass through because splicing the frames
* back is already done.
*/
- tid_tx = tx->sta->ampdu_mlme.tid_tx[tid];
+ tid_tx = rcu_dereference_protected_tid_tx(tx->sta, tid);
if (!tid_tx) {
/* do nothing, let packet pass through */
@@ -1442,11 +1443,8 @@
struct ieee80211_tx_data tx;
ieee80211_tx_result res_prepare;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- u16 queue;
bool result = true;
- queue = skb_get_queue_mapping(skb);
-
if (unlikely(skb->len < 10)) {
dev_kfree_skb(skb);
return true;
@@ -1482,12 +1480,7 @@
{
int tail_need = 0;
- /*
- * This could be optimised, devices that do full hardware
- * crypto (including TKIP MMIC) need no tailroom... But we
- * have no drivers for such devices currently.
- */
- if (may_encrypt) {
+ if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) {
tail_need = IEEE80211_ENCRYPT_TAILROOM;
tail_need -= skb_tailroom(skb);
tail_need = max_t(int, tail_need, 0);
@@ -1762,6 +1755,7 @@
ret = NETDEV_TX_OK;
goto fail;
}
+ rcu_read_lock();
if (!is_multicast_ether_addr(skb->data))
mppath = mpp_path_lookup(skb->data, sdata);
@@ -1776,13 +1770,13 @@
!(mppath && compare_ether_addr(mppath->mpp, skb->data))) {
hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
skb->data, skb->data + ETH_ALEN);
+ rcu_read_unlock();
meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
sdata, NULL, NULL);
} else {
int is_mesh_mcast = 1;
const u8 *mesh_da;
- rcu_read_lock();
if (is_multicast_ether_addr(skb->data))
/* DA TA mSA AE:SA */
mesh_da = skb->data;
@@ -2262,7 +2256,7 @@
/* headroom, head length, tail length and maximum TIM length */
skb = dev_alloc_skb(local->tx_headroom + 400 +
- sdata->u.mesh.vendor_ie_len);
+ sdata->u.mesh.ie_len);
if (!skb)
goto out;
@@ -2485,7 +2479,6 @@
{
struct ieee80211_local *local = hw_to_local(hw);
struct sk_buff *skb = NULL;
- struct sta_info *sta;
struct ieee80211_tx_data tx;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_ap *bss = NULL;
@@ -2527,7 +2520,6 @@
info = IEEE80211_SKB_CB(skb);
- sta = tx.sta;
tx.flags |= IEEE80211_TX_PS_BUFFERED;
tx.channel = local->hw.conf.channel;
info->band = tx.channel->band;
@@ -2547,8 +2539,9 @@
skb_set_network_header(skb, 0);
skb_set_transport_header(skb, 0);
- /* send all internal mgmt frames on VO */
- skb_set_queue_mapping(skb, 0);
+ /* Send all internal mgmt frames on VO. Accordingly set TID to 7. */
+ skb_set_queue_mapping(skb, IEEE80211_AC_VO);
+ skb->priority = 7;
/*
* The other path calling ieee80211_xmit is from the tasklet,
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 556647a..d3fe2d2 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1125,9 +1125,27 @@
struct sta_info *sta;
int res;
+#ifdef CONFIG_PM
if (local->suspended)
local->resuming = true;
+ if (local->wowlan) {
+ local->wowlan = false;
+ res = drv_resume(local);
+ if (res < 0) {
+ local->resuming = false;
+ return res;
+ }
+ if (res == 0)
+ goto wake_up;
+ WARN_ON(res > 1);
+ /*
+ * res is 1, which means the driver requested
+ * to go through a regular reset on wakeup.
+ */
+ }
+#endif
+
/* restart hardware */
if (local->open_count) {
/*
@@ -1258,6 +1276,7 @@
if (ieee80211_sdata_running(sdata))
ieee80211_enable_keys(sdata);
+ wake_up:
ieee80211_wake_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
@@ -1290,7 +1309,7 @@
}
}
- add_timer(&local->sta_cleanup);
+ mod_timer(&local->sta_cleanup, jiffies + 1);
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list)
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 2ff6d1e..a1c6bfd 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -30,17 +30,15 @@
/* start WEP IV from a random value */
get_random_bytes(&local->wep_iv, WEP_IV_LEN);
- local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
- CRYPTO_ALG_ASYNC);
+ local->wep_tx_tfm = crypto_alloc_cipher("arc4", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(local->wep_tx_tfm)) {
local->wep_rx_tfm = ERR_PTR(-EINVAL);
return PTR_ERR(local->wep_tx_tfm);
}
- local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
- CRYPTO_ALG_ASYNC);
+ local->wep_rx_tfm = crypto_alloc_cipher("arc4", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(local->wep_rx_tfm)) {
- crypto_free_blkcipher(local->wep_tx_tfm);
+ crypto_free_cipher(local->wep_tx_tfm);
local->wep_tx_tfm = ERR_PTR(-EINVAL);
return PTR_ERR(local->wep_rx_tfm);
}
@@ -51,9 +49,9 @@
void ieee80211_wep_free(struct ieee80211_local *local)
{
if (!IS_ERR(local->wep_tx_tfm))
- crypto_free_blkcipher(local->wep_tx_tfm);
+ crypto_free_cipher(local->wep_tx_tfm);
if (!IS_ERR(local->wep_rx_tfm))
- crypto_free_blkcipher(local->wep_rx_tfm);
+ crypto_free_cipher(local->wep_rx_tfm);
}
static inline bool ieee80211_wep_weak_iv(u32 iv, int keylen)
@@ -127,12 +125,11 @@
/* Perform WEP encryption using given key. data buffer must have tailroom
* for 4-byte ICV. data_len must not include this ICV. Note: this function
* does _not_ add IV. data = RC4(data | CRC32(data)) */
-int ieee80211_wep_encrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key,
+int ieee80211_wep_encrypt_data(struct crypto_cipher *tfm, u8 *rc4key,
size_t klen, u8 *data, size_t data_len)
{
- struct blkcipher_desc desc = { .tfm = tfm };
- struct scatterlist sg;
__le32 icv;
+ int i;
if (IS_ERR(tfm))
return -1;
@@ -140,9 +137,9 @@
icv = cpu_to_le32(~crc32_le(~0, data, data_len));
put_unaligned(icv, (__le32 *)(data + data_len));
- crypto_blkcipher_setkey(tfm, rc4key, klen);
- sg_init_one(&sg, data, data_len + WEP_ICV_LEN);
- crypto_blkcipher_encrypt(&desc, &sg, &sg, sg.length);
+ crypto_cipher_setkey(tfm, rc4key, klen);
+ for (i = 0; i < data_len + WEP_ICV_LEN; i++)
+ crypto_cipher_encrypt_one(tfm, data + i, data + i);
return 0;
}
@@ -186,19 +183,18 @@
/* Perform WEP decryption using given key. data buffer includes encrypted
* payload, including 4-byte ICV, but _not_ IV. data_len must not include ICV.
* Return 0 on success and -1 on ICV mismatch. */
-int ieee80211_wep_decrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key,
+int ieee80211_wep_decrypt_data(struct crypto_cipher *tfm, u8 *rc4key,
size_t klen, u8 *data, size_t data_len)
{
- struct blkcipher_desc desc = { .tfm = tfm };
- struct scatterlist sg;
__le32 crc;
+ int i;
if (IS_ERR(tfm))
return -1;
- crypto_blkcipher_setkey(tfm, rc4key, klen);
- sg_init_one(&sg, data, data_len + WEP_ICV_LEN);
- crypto_blkcipher_decrypt(&desc, &sg, &sg, sg.length);
+ crypto_cipher_setkey(tfm, rc4key, klen);
+ for (i = 0; i < data_len + WEP_ICV_LEN; i++)
+ crypto_cipher_decrypt_one(tfm, data + i, data + i);
crc = cpu_to_le32(~crc32_le(~0, data, data_len));
if (memcmp(&crc, data + data_len, WEP_ICV_LEN) != 0)
diff --git a/net/mac80211/wep.h b/net/mac80211/wep.h
index 58654ee..01e5484 100644
--- a/net/mac80211/wep.h
+++ b/net/mac80211/wep.h
@@ -18,12 +18,12 @@
int ieee80211_wep_init(struct ieee80211_local *local);
void ieee80211_wep_free(struct ieee80211_local *local);
-int ieee80211_wep_encrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key,
+int ieee80211_wep_encrypt_data(struct crypto_cipher *tfm, u8 *rc4key,
size_t klen, u8 *data, size_t data_len);
int ieee80211_wep_encrypt(struct ieee80211_local *local,
struct sk_buff *skb,
const u8 *key, int keylen, int keyidx);
-int ieee80211_wep_decrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key,
+int ieee80211_wep_decrypt_data(struct crypto_cipher *tfm, u8 *rc4key,
size_t klen, u8 *data, size_t data_len);
bool ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key);
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index e73c8ca..d2e7f0e 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -65,17 +65,9 @@
mod_timer(&local->work_timer, timeout);
}
-static void work_free_rcu(struct rcu_head *head)
-{
- struct ieee80211_work *wk =
- container_of(head, struct ieee80211_work, rcu_head);
-
- kfree(wk);
-}
-
void free_work(struct ieee80211_work *wk)
{
- call_rcu(&wk->rcu_head, work_free_rcu);
+ kfree_rcu(wk, rcu_head);
}
static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len,
@@ -198,9 +190,8 @@
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos, qos_info;
- const u8 *ies;
size_t offset = 0, noffset;
- int i, len, count, rates_len, supp_rates_len;
+ int i, count, rates_len, supp_rates_len;
u16 capab;
struct ieee80211_supported_band *sband;
u32 rates = 0;
@@ -285,7 +276,7 @@
}
/* SSID */
- ies = pos = skb_put(skb, 2 + wk->assoc.ssid_len);
+ pos = skb_put(skb, 2 + wk->assoc.ssid_len);
*pos++ = WLAN_EID_SSID;
*pos++ = wk->assoc.ssid_len;
memcpy(pos, wk->assoc.ssid, wk->assoc.ssid_len);
@@ -295,7 +286,6 @@
if (supp_rates_len > 8)
supp_rates_len = 8;
- len = sband->n_bitrates;
pos = skb_put(skb, supp_rates_len + 2);
*pos++ = WLAN_EID_SUPP_RATES;
*pos++ = supp_rates_len;
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index f1765de..9dc3b5f 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -87,14 +87,50 @@
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- /* No way to verify the MIC if the hardware stripped it */
- if (status->flag & RX_FLAG_MMIC_STRIPPED)
+ /*
+ * it makes no sense to check for MIC errors on anything other
+ * than data frames.
+ */
+ if (!ieee80211_is_data_present(hdr->frame_control))
return RX_CONTINUE;
- if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_TKIP ||
- !ieee80211_has_protected(hdr->frame_control) ||
- !ieee80211_is_data_present(hdr->frame_control))
+ /*
+ * No way to verify the MIC if the hardware stripped it or
+ * the IV with the key index. In this case we have solely rely
+ * on the driver to set RX_FLAG_MMIC_ERROR in the event of a
+ * MIC failure report.
+ */
+ if (status->flag & (RX_FLAG_MMIC_STRIPPED | RX_FLAG_IV_STRIPPED)) {
+ if (status->flag & RX_FLAG_MMIC_ERROR)
+ goto mic_fail;
+
+ if (!(status->flag & RX_FLAG_IV_STRIPPED))
+ goto update_iv;
+
return RX_CONTINUE;
+ }
+
+ /*
+ * Some hardware seems to generate Michael MIC failure reports; even
+ * though, the frame was not encrypted with TKIP and therefore has no
+ * MIC. Ignore the flag them to avoid triggering countermeasures.
+ */
+ if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_TKIP ||
+ !(status->flag & RX_FLAG_DECRYPTED))
+ return RX_CONTINUE;
+
+ if (rx->sdata->vif.type == NL80211_IFTYPE_AP && rx->key->conf.keyidx) {
+ /*
+ * APs with pairwise keys should never receive Michael MIC
+ * errors for non-zero keyidx because these are reserved for
+ * group keys and only the AP is sending real multicast
+ * frames in the BSS. (
+ */
+ return RX_DROP_UNUSABLE;
+ }
+
+ if (status->flag & RX_FLAG_MMIC_ERROR)
+ goto mic_fail;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
if (skb->len < hdrlen + MICHAEL_MIC_LEN)
@@ -102,27 +138,25 @@
data = skb->data + hdrlen;
data_len = skb->len - hdrlen - MICHAEL_MIC_LEN;
-
key = &rx->key->conf.key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY];
michael_mic(key, hdr, data, data_len, mic);
- if (memcmp(mic, data + data_len, MICHAEL_MIC_LEN) != 0) {
- if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
- return RX_DROP_UNUSABLE;
-
- mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
- (void *) skb->data, NULL,
- GFP_ATOMIC);
- return RX_DROP_UNUSABLE;
- }
+ if (memcmp(mic, data + data_len, MICHAEL_MIC_LEN) != 0)
+ goto mic_fail;
/* remove Michael MIC from payload */
skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
+update_iv:
/* update IV in key information to be able to detect replays */
rx->key->u.tkip.rx[rx->queue].iv32 = rx->tkip_iv32;
rx->key->u.tkip.rx[rx->queue].iv16 = rx->tkip_iv16;
return RX_CONTINUE;
+
+mic_fail:
+ mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
+ (void *) skb->data, NULL, GFP_ATOMIC);
+ return RX_DROP_UNUSABLE;
}
diff --git a/net/netfilter/ipset/ip_set_getport.c b/net/netfilter/ipset/ip_set_getport.c
index 8d52272..757143b 100644
--- a/net/netfilter/ipset/ip_set_getport.c
+++ b/net/netfilter/ipset/ip_set_getport.c
@@ -11,6 +11,7 @@
#include <linux/skbuff.h>
#include <linux/icmp.h>
#include <linux/icmpv6.h>
+#include <linux/sctp.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
#include <net/ip.h>
#include <net/ipv6.h>
@@ -35,7 +36,20 @@
*port = src ? th->source : th->dest;
break;
}
- case IPPROTO_UDP: {
+ case IPPROTO_SCTP: {
+ sctp_sctphdr_t _sh;
+ const sctp_sctphdr_t *sh;
+
+ sh = skb_header_pointer(skb, protooff, sizeof(_sh), &_sh);
+ if (sh == NULL)
+ /* No choice either */
+ return false;
+
+ *port = src ? sh->source : sh->dest;
+ break;
+ }
+ case IPPROTO_UDP:
+ case IPPROTO_UDPLITE: {
struct udphdr _udph;
const struct udphdr *uh;
diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c
index b921414..14281b6 100644
--- a/net/netfilter/ipset/ip_set_hash_ipport.c
+++ b/net/netfilter/ipset/ip_set_hash_ipport.c
@@ -491,7 +491,7 @@
.features = IPSET_TYPE_IP | IPSET_TYPE_PORT,
.dimension = IPSET_DIM_TWO,
.family = AF_UNSPEC,
- .revision = 0,
+ .revision = 1,
.create = hash_ipport_create,
.create_policy = {
[IPSET_ATTR_HASHSIZE] = { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c
index 4642872..401c8a2 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportip.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportip.c
@@ -509,7 +509,7 @@
.features = IPSET_TYPE_IP | IPSET_TYPE_PORT | IPSET_TYPE_IP2,
.dimension = IPSET_DIM_THREE,
.family = AF_UNSPEC,
- .revision = 0,
+ .revision = 1,
.create = hash_ipportip_create,
.create_policy = {
[IPSET_ATTR_HASHSIZE] = { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index 2cb84a5..4743e54 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -574,7 +574,7 @@
.features = IPSET_TYPE_IP | IPSET_TYPE_PORT | IPSET_TYPE_IP2,
.dimension = IPSET_DIM_THREE,
.family = AF_UNSPEC,
- .revision = 0,
+ .revision = 1,
.create = hash_ipportnet_create,
.create_policy = {
[IPSET_ATTR_HASHSIZE] = { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_netport.c b/net/netfilter/ipset/ip_set_hash_netport.c
index 8598676..d2a4036 100644
--- a/net/netfilter/ipset/ip_set_hash_netport.c
+++ b/net/netfilter/ipset/ip_set_hash_netport.c
@@ -526,7 +526,7 @@
.features = IPSET_TYPE_IP | IPSET_TYPE_PORT,
.dimension = IPSET_DIM_TWO,
.family = AF_UNSPEC,
- .revision = 0,
+ .revision = 1,
.create = hash_netport_create,
.create_policy = {
[IPSET_ATTR_HASHSIZE] = { .type = NLA_U32 },
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index 2dc6de13..059af31 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -572,11 +572,11 @@
.open = ip_vs_app_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
#endif
-static int __net_init __ip_vs_app_init(struct net *net)
+int __net_init __ip_vs_app_init(struct net *net)
{
struct netns_ipvs *ipvs = net_ipvs(net);
@@ -585,26 +585,17 @@
return 0;
}
-static void __net_exit __ip_vs_app_cleanup(struct net *net)
+void __net_exit __ip_vs_app_cleanup(struct net *net)
{
proc_net_remove(net, "ip_vs_app");
}
-static struct pernet_operations ip_vs_app_ops = {
- .init = __ip_vs_app_init,
- .exit = __ip_vs_app_cleanup,
-};
-
int __init ip_vs_app_init(void)
{
- int rv;
-
- rv = register_pernet_subsys(&ip_vs_app_ops);
- return rv;
+ return 0;
}
void ip_vs_app_cleanup(void)
{
- unregister_pernet_subsys(&ip_vs_app_ops);
}
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index c97bd45..bf28ac2 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1046,7 +1046,7 @@
.open = ip_vs_conn_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
static const char *ip_vs_origin_name(unsigned flags)
@@ -1114,7 +1114,7 @@
.open = ip_vs_conn_sync_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
#endif
@@ -1258,22 +1258,17 @@
return 0;
}
-static void __net_exit __ip_vs_conn_cleanup(struct net *net)
+void __net_exit __ip_vs_conn_cleanup(struct net *net)
{
/* flush all the connection entries first */
ip_vs_conn_flush(net);
proc_net_remove(net, "ip_vs_conn");
proc_net_remove(net, "ip_vs_conn_sync");
}
-static struct pernet_operations ipvs_conn_ops = {
- .init = __ip_vs_conn_init,
- .exit = __ip_vs_conn_cleanup,
-};
int __init ip_vs_conn_init(void)
{
int idx;
- int retc;
/* Compute size and mask */
ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits;
@@ -1309,17 +1304,14 @@
rwlock_init(&__ip_vs_conntbl_lock_array[idx].l);
}
- retc = register_pernet_subsys(&ipvs_conn_ops);
-
/* calculate the random value for connection hash */
get_random_bytes(&ip_vs_conn_rnd, sizeof(ip_vs_conn_rnd));
- return retc;
+ return 0;
}
void ip_vs_conn_cleanup(void)
{
- unregister_pernet_subsys(&ipvs_conn_ops);
/* Release the empty cache */
kmem_cache_destroy(ip_vs_conn_cachep);
vfree(ip_vs_conn_tab);
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 07accf6..bfa808f 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1113,6 +1113,9 @@
return NF_ACCEPT;
net = skb_net(skb);
+ if (!net_ipvs(net)->enable)
+ return NF_ACCEPT;
+
ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
#ifdef CONFIG_IP_VS_IPV6
if (af == AF_INET6) {
@@ -1343,6 +1346,7 @@
return NF_ACCEPT; /* The packet looks wrong, ignore */
net = skb_net(skb);
+
pd = ip_vs_proto_data_get(net, cih->protocol);
if (!pd)
return NF_ACCEPT;
@@ -1378,15 +1382,7 @@
ip_vs_in_stats(cp, skb);
if (IPPROTO_TCP == cih->protocol || IPPROTO_UDP == cih->protocol)
offset += 2 * sizeof(__u16);
- verdict = ip_vs_icmp_xmit(skb, cp, pp, offset);
- /* LOCALNODE from FORWARD hook is not supported */
- if (verdict == NF_ACCEPT && hooknum == NF_INET_FORWARD &&
- skb_rtable(skb)->rt_flags & RTCF_LOCAL) {
- IP_VS_DBG(1, "%s(): "
- "local delivery to %pI4 but in FORWARD\n",
- __func__, &skb_rtable(skb)->rt_dst);
- verdict = NF_DROP;
- }
+ verdict = ip_vs_icmp_xmit(skb, cp, pp, offset, hooknum);
out:
__ip_vs_conn_put(cp);
@@ -1408,7 +1404,6 @@
struct ip_vs_protocol *pp;
struct ip_vs_proto_data *pd;
unsigned int offset, verdict;
- struct rt6_info *rt;
*related = 1;
@@ -1470,23 +1465,12 @@
if (!cp)
return NF_ACCEPT;
- verdict = NF_DROP;
-
/* do the statistics and put it back */
ip_vs_in_stats(cp, skb);
if (IPPROTO_TCP == cih->nexthdr || IPPROTO_UDP == cih->nexthdr ||
IPPROTO_SCTP == cih->nexthdr)
offset += 2 * sizeof(__u16);
- verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, offset);
- /* LOCALNODE from FORWARD hook is not supported */
- if (verdict == NF_ACCEPT && hooknum == NF_INET_FORWARD &&
- (rt = (struct rt6_info *) skb_dst(skb)) &&
- rt->rt6i_dev && rt->rt6i_dev->flags & IFF_LOOPBACK) {
- IP_VS_DBG(1, "%s(): "
- "local delivery to %pI6 but in FORWARD\n",
- __func__, &rt->rt6i_dst);
- verdict = NF_DROP;
- }
+ verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, offset, hooknum);
__ip_vs_conn_put(cp);
@@ -1529,6 +1513,11 @@
IP_VS_DBG_ADDR(af, &iph.daddr), hooknum);
return NF_ACCEPT;
}
+ /* ipvs enabled in this netns ? */
+ net = skb_net(skb);
+ if (!net_ipvs(net)->enable)
+ return NF_ACCEPT;
+
ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
/* Bad... Do not break raw sockets */
@@ -1562,7 +1551,6 @@
ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
}
- net = skb_net(skb);
/* Protocol supported? */
pd = ip_vs_proto_data_get(net, iph.protocol);
if (unlikely(!pd))
@@ -1588,7 +1576,6 @@
}
IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
- net = skb_net(skb);
ipvs = net_ipvs(net);
/* Check the server status */
if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
@@ -1743,10 +1730,16 @@
int (*okfn)(struct sk_buff *))
{
int r;
+ struct net *net;
if (ip_hdr(skb)->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
+ /* ipvs enabled in this netns ? */
+ net = skb_net(skb);
+ if (!net_ipvs(net)->enable)
+ return NF_ACCEPT;
+
return ip_vs_in_icmp(skb, &r, hooknum);
}
@@ -1757,10 +1750,16 @@
int (*okfn)(struct sk_buff *))
{
int r;
+ struct net *net;
if (ipv6_hdr(skb)->nexthdr != IPPROTO_ICMPV6)
return NF_ACCEPT;
+ /* ipvs enabled in this netns ? */
+ net = skb_net(skb);
+ if (!net_ipvs(net)->enable)
+ return NF_ACCEPT;
+
return ip_vs_in_icmp_v6(skb, &r, hooknum);
}
#endif
@@ -1884,19 +1883,70 @@
pr_err("%s(): no memory.\n", __func__);
return -ENOMEM;
}
+ /* Hold the beast until a service is registerd */
+ ipvs->enable = 0;
ipvs->net = net;
/* Counters used for creating unique names */
ipvs->gen = atomic_read(&ipvs_netns_cnt);
atomic_inc(&ipvs_netns_cnt);
net->ipvs = ipvs;
+
+ if (__ip_vs_estimator_init(net) < 0)
+ goto estimator_fail;
+
+ if (__ip_vs_control_init(net) < 0)
+ goto control_fail;
+
+ if (__ip_vs_protocol_init(net) < 0)
+ goto protocol_fail;
+
+ if (__ip_vs_app_init(net) < 0)
+ goto app_fail;
+
+ if (__ip_vs_conn_init(net) < 0)
+ goto conn_fail;
+
+ if (__ip_vs_sync_init(net) < 0)
+ goto sync_fail;
+
printk(KERN_INFO "IPVS: Creating netns size=%zu id=%d\n",
sizeof(struct netns_ipvs), ipvs->gen);
return 0;
+/*
+ * Error handling
+ */
+
+sync_fail:
+ __ip_vs_conn_cleanup(net);
+conn_fail:
+ __ip_vs_app_cleanup(net);
+app_fail:
+ __ip_vs_protocol_cleanup(net);
+protocol_fail:
+ __ip_vs_control_cleanup(net);
+control_fail:
+ __ip_vs_estimator_cleanup(net);
+estimator_fail:
+ return -ENOMEM;
}
static void __net_exit __ip_vs_cleanup(struct net *net)
{
- IP_VS_DBG(10, "ipvs netns %d released\n", net_ipvs(net)->gen);
+ __ip_vs_service_cleanup(net); /* ip_vs_flush() with locks */
+ __ip_vs_conn_cleanup(net);
+ __ip_vs_app_cleanup(net);
+ __ip_vs_protocol_cleanup(net);
+ __ip_vs_control_cleanup(net);
+ __ip_vs_estimator_cleanup(net);
+ IP_VS_DBG(2, "ipvs netns %d released\n", net_ipvs(net)->gen);
+}
+
+static void __net_exit __ip_vs_dev_cleanup(struct net *net)
+{
+ EnterFunction(2);
+ net_ipvs(net)->enable = 0; /* Disable packet reception */
+ __ip_vs_sync_cleanup(net);
+ LeaveFunction(2);
}
static struct pernet_operations ipvs_core_ops = {
@@ -1906,6 +1956,10 @@
.size = sizeof(struct netns_ipvs),
};
+static struct pernet_operations ipvs_core_dev_ops = {
+ .exit = __ip_vs_dev_cleanup,
+};
+
/*
* Initialize IP Virtual Server
*/
@@ -1913,10 +1967,6 @@
{
int ret;
- ret = register_pernet_subsys(&ipvs_core_ops); /* Alloc ip_vs struct */
- if (ret < 0)
- return ret;
-
ip_vs_estimator_init();
ret = ip_vs_control_init();
if (ret < 0) {
@@ -1944,15 +1994,28 @@
goto cleanup_conn;
}
+ ret = register_pernet_subsys(&ipvs_core_ops); /* Alloc ip_vs struct */
+ if (ret < 0)
+ goto cleanup_sync;
+
+ ret = register_pernet_device(&ipvs_core_dev_ops);
+ if (ret < 0)
+ goto cleanup_sub;
+
ret = nf_register_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
if (ret < 0) {
pr_err("can't register hooks.\n");
- goto cleanup_sync;
+ goto cleanup_dev;
}
pr_info("ipvs loaded.\n");
+
return ret;
+cleanup_dev:
+ unregister_pernet_device(&ipvs_core_dev_ops);
+cleanup_sub:
+ unregister_pernet_subsys(&ipvs_core_ops);
cleanup_sync:
ip_vs_sync_cleanup();
cleanup_conn:
@@ -1964,20 +2027,20 @@
ip_vs_control_cleanup();
cleanup_estimator:
ip_vs_estimator_cleanup();
- unregister_pernet_subsys(&ipvs_core_ops); /* free ip_vs struct */
return ret;
}
static void __exit ip_vs_cleanup(void)
{
nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
+ unregister_pernet_device(&ipvs_core_dev_ops);
+ unregister_pernet_subsys(&ipvs_core_ops); /* free ip_vs struct */
ip_vs_sync_cleanup();
ip_vs_conn_cleanup();
ip_vs_app_cleanup();
ip_vs_protocol_cleanup();
ip_vs_control_cleanup();
ip_vs_estimator_cleanup();
- unregister_pernet_subsys(&ipvs_core_ops); /* free ip_vs struct */
pr_info("ipvs unloaded.\n");
}
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index ae47090..699c79a 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -69,6 +69,11 @@
}
#endif
+
+/* Protos */
+static void __ip_vs_del_service(struct ip_vs_service *svc);
+
+
#ifdef CONFIG_IP_VS_IPV6
/* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
static int __ip_vs_addr_is_local_v6(struct net *net,
@@ -1214,6 +1219,8 @@
write_unlock_bh(&__ip_vs_svc_lock);
*svc_p = svc;
+ /* Now there is a service - full throttle */
+ ipvs->enable = 1;
return 0;
@@ -1472,6 +1479,84 @@
return 0;
}
+/*
+ * Delete service by {netns} in the service table.
+ * Called by __ip_vs_cleanup()
+ */
+void __ip_vs_service_cleanup(struct net *net)
+{
+ EnterFunction(2);
+ /* Check for "full" addressed entries */
+ mutex_lock(&__ip_vs_mutex);
+ ip_vs_flush(net);
+ mutex_unlock(&__ip_vs_mutex);
+ LeaveFunction(2);
+}
+/*
+ * Release dst hold by dst_cache
+ */
+static inline void
+__ip_vs_dev_reset(struct ip_vs_dest *dest, struct net_device *dev)
+{
+ spin_lock_bh(&dest->dst_lock);
+ if (dest->dst_cache && dest->dst_cache->dev == dev) {
+ IP_VS_DBG_BUF(3, "Reset dev:%s dest %s:%u ,dest->refcnt=%d\n",
+ dev->name,
+ IP_VS_DBG_ADDR(dest->af, &dest->addr),
+ ntohs(dest->port),
+ atomic_read(&dest->refcnt));
+ ip_vs_dst_reset(dest);
+ }
+ spin_unlock_bh(&dest->dst_lock);
+
+}
+/*
+ * Netdev event receiver
+ * Currently only NETDEV_UNREGISTER is handled, i.e. if we hold a reference to
+ * a device that is "unregister" it must be released.
+ */
+static int ip_vs_dst_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ struct net_device *dev = ptr;
+ struct net *net = dev_net(dev);
+ struct ip_vs_service *svc;
+ struct ip_vs_dest *dest;
+ unsigned int idx;
+
+ if (event != NETDEV_UNREGISTER)
+ return NOTIFY_DONE;
+ IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name);
+ EnterFunction(2);
+ mutex_lock(&__ip_vs_mutex);
+ for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
+ list_for_each_entry(svc, &ip_vs_svc_table[idx], s_list) {
+ if (net_eq(svc->net, net)) {
+ list_for_each_entry(dest, &svc->destinations,
+ n_list) {
+ __ip_vs_dev_reset(dest, dev);
+ }
+ }
+ }
+
+ list_for_each_entry(svc, &ip_vs_svc_fwm_table[idx], f_list) {
+ if (net_eq(svc->net, net)) {
+ list_for_each_entry(dest, &svc->destinations,
+ n_list) {
+ __ip_vs_dev_reset(dest, dev);
+ }
+ }
+
+ }
+ }
+
+ list_for_each_entry(dest, &net_ipvs(net)->dest_trash, n_list) {
+ __ip_vs_dev_reset(dest, dev);
+ }
+ mutex_unlock(&__ip_vs_mutex);
+ LeaveFunction(2);
+ return NOTIFY_DONE;
+}
/*
* Zero counters in a service or all services
@@ -1981,12 +2066,9 @@
.open = ip_vs_info_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release_private,
+ .release = seq_release_net,
};
-#endif
-
-#ifdef CONFIG_PROC_FS
static int ip_vs_stats_show(struct seq_file *seq, void *v)
{
struct net *net = seq_file_single_net(seq);
@@ -2024,7 +2106,7 @@
.open = ip_vs_stats_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = single_release,
+ .release = single_release_net,
};
static int ip_vs_stats_percpu_show(struct seq_file *seq, void *v)
@@ -2093,7 +2175,7 @@
.open = ip_vs_stats_percpu_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = single_release,
+ .release = single_release_net,
};
#endif
@@ -3588,6 +3670,10 @@
#endif
+static struct notifier_block ip_vs_dst_notifier = {
+ .notifier_call = ip_vs_dst_event,
+};
+
int __net_init __ip_vs_control_init(struct net *net)
{
int idx;
@@ -3626,7 +3712,7 @@
return -ENOMEM;
}
-static void __net_exit __ip_vs_control_cleanup(struct net *net)
+void __net_exit __ip_vs_control_cleanup(struct net *net)
{
struct netns_ipvs *ipvs = net_ipvs(net);
@@ -3639,11 +3725,6 @@
free_percpu(ipvs->tot_stats.cpustats);
}
-static struct pernet_operations ipvs_control_ops = {
- .init = __ip_vs_control_init,
- .exit = __ip_vs_control_cleanup,
-};
-
int __init ip_vs_control_init(void)
{
int idx;
@@ -3657,33 +3738,32 @@
INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]);
}
- ret = register_pernet_subsys(&ipvs_control_ops);
- if (ret) {
- pr_err("cannot register namespace.\n");
- goto err;
- }
-
smp_wmb(); /* Do we really need it now ? */
ret = nf_register_sockopt(&ip_vs_sockopts);
if (ret) {
pr_err("cannot register sockopt.\n");
- goto err_net;
+ goto err_sock;
}
ret = ip_vs_genl_register();
if (ret) {
pr_err("cannot register Generic Netlink interface.\n");
- nf_unregister_sockopt(&ip_vs_sockopts);
- goto err_net;
+ goto err_genl;
}
+ ret = register_netdevice_notifier(&ip_vs_dst_notifier);
+ if (ret < 0)
+ goto err_notf;
+
LeaveFunction(2);
return 0;
-err_net:
- unregister_pernet_subsys(&ipvs_control_ops);
-err:
+err_notf:
+ ip_vs_genl_unregister();
+err_genl:
+ nf_unregister_sockopt(&ip_vs_sockopts);
+err_sock:
return ret;
}
@@ -3691,7 +3771,6 @@
void ip_vs_control_cleanup(void)
{
EnterFunction(2);
- unregister_pernet_subsys(&ipvs_control_ops);
ip_vs_genl_unregister();
nf_unregister_sockopt(&ip_vs_sockopts);
LeaveFunction(2);
diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c
index 8c8766c..508cce9 100644
--- a/net/netfilter/ipvs/ip_vs_est.c
+++ b/net/netfilter/ipvs/ip_vs_est.c
@@ -192,7 +192,7 @@
dst->outbps = (e->outbps + 0xF) >> 5;
}
-static int __net_init __ip_vs_estimator_init(struct net *net)
+int __net_init __ip_vs_estimator_init(struct net *net)
{
struct netns_ipvs *ipvs = net_ipvs(net);
@@ -203,24 +203,16 @@
return 0;
}
-static void __net_exit __ip_vs_estimator_exit(struct net *net)
+void __net_exit __ip_vs_estimator_cleanup(struct net *net)
{
del_timer_sync(&net_ipvs(net)->est_timer);
}
-static struct pernet_operations ip_vs_app_ops = {
- .init = __ip_vs_estimator_init,
- .exit = __ip_vs_estimator_exit,
-};
int __init ip_vs_estimator_init(void)
{
- int rv;
-
- rv = register_pernet_subsys(&ip_vs_app_ops);
- return rv;
+ return 0;
}
void ip_vs_estimator_cleanup(void)
{
- unregister_pernet_subsys(&ip_vs_app_ops);
}
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index 17484a4..eb86028 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -316,7 +316,7 @@
/*
* per network name-space init
*/
-static int __net_init __ip_vs_protocol_init(struct net *net)
+int __net_init __ip_vs_protocol_init(struct net *net)
{
#ifdef CONFIG_IP_VS_PROTO_TCP
register_ip_vs_proto_netns(net, &ip_vs_protocol_tcp);
@@ -336,7 +336,7 @@
return 0;
}
-static void __net_exit __ip_vs_protocol_cleanup(struct net *net)
+void __net_exit __ip_vs_protocol_cleanup(struct net *net)
{
struct netns_ipvs *ipvs = net_ipvs(net);
struct ip_vs_proto_data *pd;
@@ -349,11 +349,6 @@
}
}
-static struct pernet_operations ipvs_proto_ops = {
- .init = __ip_vs_protocol_init,
- .exit = __ip_vs_protocol_cleanup,
-};
-
int __init ip_vs_protocol_init(void)
{
char protocols[64];
@@ -382,7 +377,6 @@
REGISTER_PROTOCOL(&ip_vs_protocol_esp);
#endif
pr_info("Registered protocols (%s)\n", &protocols[2]);
- return register_pernet_subsys(&ipvs_proto_ops);
return 0;
}
@@ -393,7 +387,6 @@
struct ip_vs_protocol *pp;
int i;
- unregister_pernet_subsys(&ipvs_proto_ops);
/* unregister all the ipvs protocols */
for (i = 0; i < IP_VS_PROTO_TAB_SIZE; i++) {
while ((pp = ip_vs_proto_table[i]) != NULL)
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 3e7961e..e292e5b 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1303,13 +1303,18 @@
struct socket *sock;
int result;
- /* First create a socket */
- result = __sock_create(net, PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock, 1);
+ /* First create a socket move it to right name space later */
+ result = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock);
if (result < 0) {
pr_err("Error during creation of socket; terminating\n");
return ERR_PTR(result);
}
-
+ /*
+ * Kernel sockets that are a part of a namespace, should not
+ * hold a reference to a namespace in order to allow to stop it.
+ * After sk_change_net should be released using sk_release_kernel.
+ */
+ sk_change_net(sock->sk, net);
result = set_mcast_if(sock->sk, ipvs->master_mcast_ifn);
if (result < 0) {
pr_err("Error setting outbound mcast interface\n");
@@ -1334,8 +1339,8 @@
return sock;
- error:
- sock_release(sock);
+error:
+ sk_release_kernel(sock->sk);
return ERR_PTR(result);
}
@@ -1350,12 +1355,17 @@
int result;
/* First create a socket */
- result = __sock_create(net, PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock, 1);
+ result = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock);
if (result < 0) {
pr_err("Error during creation of socket; terminating\n");
return ERR_PTR(result);
}
-
+ /*
+ * Kernel sockets that are a part of a namespace, should not
+ * hold a reference to a namespace in order to allow to stop it.
+ * After sk_change_net should be released using sk_release_kernel.
+ */
+ sk_change_net(sock->sk, net);
/* it is equivalent to the REUSEADDR option in user-space */
sock->sk->sk_reuse = 1;
@@ -1377,8 +1387,8 @@
return sock;
- error:
- sock_release(sock);
+error:
+ sk_release_kernel(sock->sk);
return ERR_PTR(result);
}
@@ -1473,7 +1483,7 @@
ip_vs_sync_buff_release(sb);
/* release the sending multicast socket */
- sock_release(tinfo->sock);
+ sk_release_kernel(tinfo->sock->sk);
kfree(tinfo);
return 0;
@@ -1513,7 +1523,7 @@
}
/* release the sending multicast socket */
- sock_release(tinfo->sock);
+ sk_release_kernel(tinfo->sock->sk);
kfree(tinfo->buf);
kfree(tinfo);
@@ -1601,7 +1611,7 @@
outbuf:
kfree(buf);
outsocket:
- sock_release(sock);
+ sk_release_kernel(sock->sk);
out:
return result;
}
@@ -1610,6 +1620,7 @@
int stop_sync_thread(struct net *net, int state)
{
struct netns_ipvs *ipvs = net_ipvs(net);
+ int retc = -EINVAL;
IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
@@ -1629,7 +1640,7 @@
spin_lock_bh(&ipvs->sync_lock);
ipvs->sync_state &= ~IP_VS_STATE_MASTER;
spin_unlock_bh(&ipvs->sync_lock);
- kthread_stop(ipvs->master_thread);
+ retc = kthread_stop(ipvs->master_thread);
ipvs->master_thread = NULL;
} else if (state == IP_VS_STATE_BACKUP) {
if (!ipvs->backup_thread)
@@ -1639,22 +1650,20 @@
task_pid_nr(ipvs->backup_thread));
ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
- kthread_stop(ipvs->backup_thread);
+ retc = kthread_stop(ipvs->backup_thread);
ipvs->backup_thread = NULL;
- } else {
- return -EINVAL;
}
/* decrease the module use count */
ip_vs_use_count_dec();
- return 0;
+ return retc;
}
/*
* Initialize data struct for each netns
*/
-static int __net_init __ip_vs_sync_init(struct net *net)
+int __net_init __ip_vs_sync_init(struct net *net)
{
struct netns_ipvs *ipvs = net_ipvs(net);
@@ -1668,24 +1677,24 @@
return 0;
}
-static void __ip_vs_sync_cleanup(struct net *net)
+void __ip_vs_sync_cleanup(struct net *net)
{
- stop_sync_thread(net, IP_VS_STATE_MASTER);
- stop_sync_thread(net, IP_VS_STATE_BACKUP);
+ int retc;
+
+ retc = stop_sync_thread(net, IP_VS_STATE_MASTER);
+ if (retc && retc != -ESRCH)
+ pr_err("Failed to stop Master Daemon\n");
+
+ retc = stop_sync_thread(net, IP_VS_STATE_BACKUP);
+ if (retc && retc != -ESRCH)
+ pr_err("Failed to stop Backup Daemon\n");
}
-static struct pernet_operations ipvs_sync_ops = {
- .init = __ip_vs_sync_init,
- .exit = __ip_vs_sync_cleanup,
-};
-
-
int __init ip_vs_sync_init(void)
{
- return register_pernet_subsys(&ipvs_sync_ops);
+ return 0;
}
void ip_vs_sync_cleanup(void)
{
- unregister_pernet_subsys(&ipvs_sync_ops);
}
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index 6132b21..ee319a4 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -87,7 +87,7 @@
/* Get route to destination or remote server */
static struct rtable *
__ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
- __be32 daddr, u32 rtos, int rt_mode)
+ __be32 daddr, u32 rtos, int rt_mode, __be32 *ret_saddr)
{
struct net *net = dev_net(skb_dst(skb)->dev);
struct rtable *rt; /* Route to the other host */
@@ -98,7 +98,12 @@
spin_lock(&dest->dst_lock);
if (!(rt = (struct rtable *)
__ip_vs_dst_check(dest, rtos))) {
- rt = ip_route_output(net, dest->addr.ip, 0, rtos, 0);
+ struct flowi4 fl4;
+
+ memset(&fl4, 0, sizeof(fl4));
+ fl4.daddr = dest->addr.ip;
+ fl4.flowi4_tos = rtos;
+ rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt)) {
spin_unlock(&dest->dst_lock);
IP_VS_DBG_RL("ip_route_output error, dest: %pI4\n",
@@ -106,18 +111,30 @@
return NULL;
}
__ip_vs_dst_set(dest, rtos, dst_clone(&rt->dst), 0);
- IP_VS_DBG(10, "new dst %pI4, refcnt=%d, rtos=%X\n",
- &dest->addr.ip,
+ dest->dst_saddr.ip = fl4.saddr;
+ IP_VS_DBG(10, "new dst %pI4, src %pI4, refcnt=%d, "
+ "rtos=%X\n",
+ &dest->addr.ip, &dest->dst_saddr.ip,
atomic_read(&rt->dst.__refcnt), rtos);
}
+ daddr = dest->addr.ip;
+ if (ret_saddr)
+ *ret_saddr = dest->dst_saddr.ip;
spin_unlock(&dest->dst_lock);
} else {
- rt = ip_route_output(net, daddr, 0, rtos, 0);
+ struct flowi4 fl4;
+
+ memset(&fl4, 0, sizeof(fl4));
+ fl4.daddr = daddr;
+ fl4.flowi4_tos = rtos;
+ rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt)) {
IP_VS_DBG_RL("ip_route_output error, dest: %pI4\n",
&daddr);
return NULL;
}
+ if (ret_saddr)
+ *ret_saddr = fl4.saddr;
}
local = rt->rt_flags & RTCF_LOCAL;
@@ -125,7 +142,7 @@
rt_mode)) {
IP_VS_DBG_RL("Stopping traffic to %s address, dest: %pI4\n",
(rt->rt_flags & RTCF_LOCAL) ?
- "local":"non-local", &rt->rt_dst);
+ "local":"non-local", &daddr);
ip_rt_put(rt);
return NULL;
}
@@ -133,14 +150,14 @@
!((ort = skb_rtable(skb)) && ort->rt_flags & RTCF_LOCAL)) {
IP_VS_DBG_RL("Redirect from non-local address %pI4 to local "
"requires NAT method, dest: %pI4\n",
- &ip_hdr(skb)->daddr, &rt->rt_dst);
+ &ip_hdr(skb)->daddr, &daddr);
ip_rt_put(rt);
return NULL;
}
if (unlikely(!local && ipv4_is_loopback(ip_hdr(skb)->saddr))) {
IP_VS_DBG_RL("Stopping traffic from loopback address %pI4 "
"to non-local address, dest: %pI4\n",
- &ip_hdr(skb)->saddr, &rt->rt_dst);
+ &ip_hdr(skb)->saddr, &daddr);
ip_rt_put(rt);
return NULL;
}
@@ -229,8 +246,6 @@
/*
* Get route to destination or remote server
- * rt_mode: flags, &1=Allow local dest, &2=Allow non-local dest,
- * &4=Allow redirect from remote daddr to local
*/
static struct rt6_info *
__ip_vs_get_out_rt_v6(struct sk_buff *skb, struct ip_vs_dest *dest,
@@ -250,7 +265,7 @@
u32 cookie;
dst = __ip_vs_route_output_v6(net, &dest->addr.in6,
- &dest->dst_saddr,
+ &dest->dst_saddr.in6,
do_xfrm);
if (!dst) {
spin_unlock(&dest->dst_lock);
@@ -260,11 +275,11 @@
cookie = rt->rt6i_node ? rt->rt6i_node->fn_sernum : 0;
__ip_vs_dst_set(dest, 0, dst_clone(&rt->dst), cookie);
IP_VS_DBG(10, "new dst %pI6, src %pI6, refcnt=%d\n",
- &dest->addr.in6, &dest->dst_saddr,
+ &dest->addr.in6, &dest->dst_saddr.in6,
atomic_read(&rt->dst.__refcnt));
}
if (ret_saddr)
- ipv6_addr_copy(ret_saddr, &dest->dst_saddr);
+ ipv6_addr_copy(ret_saddr, &dest->dst_saddr.in6);
spin_unlock(&dest->dst_lock);
} else {
dst = __ip_vs_route_output_v6(net, daddr, ret_saddr, do_xfrm);
@@ -274,13 +289,14 @@
}
local = __ip_vs_is_local_route6(rt);
- if (!((local ? 1 : 2) & rt_mode)) {
+ if (!((local ? IP_VS_RT_MODE_LOCAL : IP_VS_RT_MODE_NON_LOCAL) &
+ rt_mode)) {
IP_VS_DBG_RL("Stopping traffic to %s address, dest: %pI6\n",
local ? "local":"non-local", daddr);
dst_release(&rt->dst);
return NULL;
}
- if (local && !(rt_mode & 4) &&
+ if (local && !(rt_mode & IP_VS_RT_MODE_RDR) &&
!((ort = (struct rt6_info *) skb_dst(skb)) &&
__ip_vs_is_local_route6(ort))) {
IP_VS_DBG_RL("Redirect from non-local address %pI6 to local "
@@ -386,7 +402,7 @@
EnterFunction(10);
if (!(rt = __ip_vs_get_out_rt(skb, NULL, iph->daddr, RT_TOS(iph->tos),
- IP_VS_RT_MODE_NON_LOCAL)))
+ IP_VS_RT_MODE_NON_LOCAL, NULL)))
goto tx_error_icmp;
/* MTU checking */
@@ -440,7 +456,8 @@
EnterFunction(10);
- if (!(rt = __ip_vs_get_out_rt_v6(skb, NULL, &iph->daddr, NULL, 0, 2)))
+ if (!(rt = __ip_vs_get_out_rt_v6(skb, NULL, &iph->daddr, NULL, 0,
+ IP_VS_RT_MODE_NON_LOCAL)))
goto tx_error_icmp;
/* MTU checking */
@@ -517,7 +534,7 @@
RT_TOS(iph->tos),
IP_VS_RT_MODE_LOCAL |
IP_VS_RT_MODE_NON_LOCAL |
- IP_VS_RT_MODE_RDR)))
+ IP_VS_RT_MODE_RDR, NULL)))
goto tx_error_icmp;
local = rt->rt_flags & RTCF_LOCAL;
/*
@@ -539,7 +556,7 @@
#endif
/* From world but DNAT to loopback address? */
- if (local && ipv4_is_loopback(rt->rt_dst) &&
+ if (local && ipv4_is_loopback(cp->daddr.ip) &&
rt_is_input_route(skb_rtable(skb))) {
IP_VS_DBG_RL_PKT(1, AF_INET, pp, skb, 0, "ip_vs_nat_xmit(): "
"stopping DNAT to loopback address");
@@ -632,7 +649,9 @@
}
if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6, NULL,
- 0, 1|2|4)))
+ 0, (IP_VS_RT_MODE_LOCAL |
+ IP_VS_RT_MODE_NON_LOCAL |
+ IP_VS_RT_MODE_RDR))))
goto tx_error_icmp;
local = __ip_vs_is_local_route6(rt);
/*
@@ -748,6 +767,7 @@
struct ip_vs_protocol *pp)
{
struct rtable *rt; /* Route to the other host */
+ __be32 saddr; /* Source for tunnel */
struct net_device *tdev; /* Device to other host */
struct iphdr *old_iph = ip_hdr(skb);
u8 tos = old_iph->tos;
@@ -761,7 +781,8 @@
if (!(rt = __ip_vs_get_out_rt(skb, cp->dest, cp->daddr.ip,
RT_TOS(tos), IP_VS_RT_MODE_LOCAL |
- IP_VS_RT_MODE_NON_LOCAL)))
+ IP_VS_RT_MODE_NON_LOCAL,
+ &saddr)))
goto tx_error_icmp;
if (rt->rt_flags & RTCF_LOCAL) {
ip_rt_put(rt);
@@ -829,8 +850,8 @@
iph->frag_off = df;
iph->protocol = IPPROTO_IPIP;
iph->tos = tos;
- iph->daddr = rt->rt_dst;
- iph->saddr = rt->rt_src;
+ iph->daddr = cp->daddr.ip;
+ iph->saddr = saddr;
iph->ttl = old_iph->ttl;
ip_select_ident(iph, &rt->dst, NULL);
@@ -875,7 +896,8 @@
EnterFunction(10);
if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6,
- &saddr, 1, 1|2)))
+ &saddr, 1, (IP_VS_RT_MODE_LOCAL |
+ IP_VS_RT_MODE_NON_LOCAL))))
goto tx_error_icmp;
if (__ip_vs_is_local_route6(rt)) {
dst_release(&rt->dst);
@@ -992,7 +1014,7 @@
if (!(rt = __ip_vs_get_out_rt(skb, cp->dest, cp->daddr.ip,
RT_TOS(iph->tos),
IP_VS_RT_MODE_LOCAL |
- IP_VS_RT_MODE_NON_LOCAL)))
+ IP_VS_RT_MODE_NON_LOCAL, NULL)))
goto tx_error_icmp;
if (rt->rt_flags & RTCF_LOCAL) {
ip_rt_put(rt);
@@ -1050,7 +1072,8 @@
EnterFunction(10);
if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6, NULL,
- 0, 1|2)))
+ 0, (IP_VS_RT_MODE_LOCAL |
+ IP_VS_RT_MODE_NON_LOCAL))))
goto tx_error_icmp;
if (__ip_vs_is_local_route6(rt)) {
dst_release(&rt->dst);
@@ -1109,12 +1132,13 @@
*/
int
ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
- struct ip_vs_protocol *pp, int offset)
+ struct ip_vs_protocol *pp, int offset, unsigned int hooknum)
{
struct rtable *rt; /* Route to the other host */
int mtu;
int rc;
int local;
+ int rt_mode;
EnterFunction(10);
@@ -1135,11 +1159,13 @@
* mangle and send the packet here (only for VS/NAT)
*/
+ /* LOCALNODE from FORWARD hook is not supported */
+ rt_mode = (hooknum != NF_INET_FORWARD) ?
+ IP_VS_RT_MODE_LOCAL | IP_VS_RT_MODE_NON_LOCAL |
+ IP_VS_RT_MODE_RDR : IP_VS_RT_MODE_NON_LOCAL;
if (!(rt = __ip_vs_get_out_rt(skb, cp->dest, cp->daddr.ip,
RT_TOS(ip_hdr(skb)->tos),
- IP_VS_RT_MODE_LOCAL |
- IP_VS_RT_MODE_NON_LOCAL |
- IP_VS_RT_MODE_RDR)))
+ rt_mode, NULL)))
goto tx_error_icmp;
local = rt->rt_flags & RTCF_LOCAL;
@@ -1162,7 +1188,7 @@
#endif
/* From world but DNAT to loopback address? */
- if (local && ipv4_is_loopback(rt->rt_dst) &&
+ if (local && ipv4_is_loopback(cp->daddr.ip) &&
rt_is_input_route(skb_rtable(skb))) {
IP_VS_DBG(1, "%s(): "
"stopping DNAT to loopback %pI4\n",
@@ -1227,12 +1253,13 @@
#ifdef CONFIG_IP_VS_IPV6
int
ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
- struct ip_vs_protocol *pp, int offset)
+ struct ip_vs_protocol *pp, int offset, unsigned int hooknum)
{
struct rt6_info *rt; /* Route to the other host */
int mtu;
int rc;
int local;
+ int rt_mode;
EnterFunction(10);
@@ -1253,8 +1280,12 @@
* mangle and send the packet here (only for VS/NAT)
*/
+ /* LOCALNODE from FORWARD hook is not supported */
+ rt_mode = (hooknum != NF_INET_FORWARD) ?
+ IP_VS_RT_MODE_LOCAL | IP_VS_RT_MODE_NON_LOCAL |
+ IP_VS_RT_MODE_RDR : IP_VS_RT_MODE_NON_LOCAL;
if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6, NULL,
- 0, 1|2|4)))
+ 0, rt_mode)))
goto tx_error_icmp;
local = __ip_vs_is_local_route6(rt);
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 80a23ed..05ecdc2 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -68,12 +68,6 @@
return (void *)(*ext) + off;
}
-static void __nf_ct_ext_free_rcu(struct rcu_head *head)
-{
- struct nf_ct_ext *ext = container_of(head, struct nf_ct_ext, rcu);
- kfree(ext);
-}
-
void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
{
struct nf_ct_ext *old, *new;
@@ -114,7 +108,7 @@
(void *)old + old->offset[i]);
rcu_read_unlock();
}
- call_rcu(&old->rcu, __nf_ct_ext_free_rcu);
+ kfree_rcu(old, rcu);
ct->ext = new;
}
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 30bf8a1..482e90c 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1334,6 +1334,7 @@
struct nf_conn *ct;
int err = -EINVAL;
struct nf_conntrack_helper *helper;
+ struct nf_conn_tstamp *tstamp;
ct = nf_conntrack_alloc(net, zone, otuple, rtuple, GFP_ATOMIC);
if (IS_ERR(ct))
@@ -1451,6 +1452,9 @@
__set_bit(IPS_EXPECTED_BIT, &ct->status);
ct->master = master_ct;
}
+ tstamp = nf_conn_tstamp_find(ct);
+ if (tstamp)
+ tstamp->start = ktime_to_ns(ktime_get_real());
add_timer(&ct->timeout);
nf_conntrack_hash_insert(ct);
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 237cc19..cb5a285 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1419,6 +1419,7 @@
const char *dptr, *end;
s16 diff, tdiff = 0;
int ret = NF_ACCEPT;
+ bool term;
typeof(nf_nat_sip_seq_adjust_hook) nf_nat_sip_seq_adjust;
if (ctinfo != IP_CT_ESTABLISHED &&
@@ -1453,14 +1454,21 @@
if (dptr + matchoff == end)
break;
- if (end + strlen("\r\n\r\n") > dptr + datalen)
- break;
- if (end[0] != '\r' || end[1] != '\n' ||
- end[2] != '\r' || end[3] != '\n')
+ term = false;
+ for (; end + strlen("\r\n\r\n") <= dptr + datalen; end++) {
+ if (end[0] == '\r' && end[1] == '\n' &&
+ end[2] == '\r' && end[3] == '\n') {
+ term = true;
+ break;
+ }
+ }
+ if (!term)
break;
end += strlen("\r\n\r\n") + clen;
msglen = origlen = end - dptr;
+ if (msglen > datalen)
+ return NF_DROP;
ret = process_sip_msg(skb, ct, dataoff, &dptr, &msglen);
if (ret != NF_ACCEPT)
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 0ae1428..05e9feb 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -245,7 +245,7 @@
ret = 0;
release:
nf_ct_put(ct);
- return 0;
+ return ret;
}
static const struct seq_operations ct_seq_ops = {
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 985e9b7..e0ee010 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -381,7 +381,6 @@
struct nfulnl_msg_packet_hdr pmsg;
struct nlmsghdr *nlh;
struct nfgenmsg *nfmsg;
- __be32 tmp_uint;
sk_buff_data_t old_tail = inst->skb->tail;
nlh = NLMSG_PUT(inst->skb, 0, 0,
@@ -428,7 +427,6 @@
}
if (outdev) {
- tmp_uint = htonl(outdev->ifindex);
#ifndef CONFIG_BRIDGE_NETFILTER
NLA_PUT_BE32(inst->skb, NFULA_IFINDEX_OUTDEV,
htonl(outdev->ifindex));
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index a9adf4c..b0869fe 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -455,6 +455,7 @@
vfree(xt[af].compat_tab);
xt[af].compat_tab = NULL;
xt[af].number = 0;
+ xt[af].cur = 0;
}
}
EXPORT_SYMBOL_GPL(xt_compat_flush_offsets);
@@ -473,8 +474,7 @@
else
return mid ? tmp[mid - 1].delta : 0;
}
- WARN_ON_ONCE(1);
- return 0;
+ return left ? tmp[left - 1].delta : 0;
}
EXPORT_SYMBOL_GPL(xt_compat_calc_jump);
@@ -762,8 +762,8 @@
EXPORT_SYMBOL_GPL(xt_compat_unlock);
#endif
-DEFINE_PER_CPU(struct xt_info_lock, xt_info_locks);
-EXPORT_PER_CPU_SYMBOL_GPL(xt_info_locks);
+DEFINE_PER_CPU(seqcount_t, xt_recseq);
+EXPORT_PER_CPU_SYMBOL_GPL(xt_recseq);
static int xt_jumpstack_alloc(struct xt_table_info *i)
{
@@ -1362,10 +1362,7 @@
int rv;
for_each_possible_cpu(i) {
- struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
-
- seqlock_init(&lock->lock);
- lock->readers = 0;
+ seqcount_init(&per_cpu(xt_recseq, i));
}
xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
diff --git a/net/netfilter/xt_DSCP.c b/net/netfilter/xt_DSCP.c
index 0a22919..ae82716 100644
--- a/net/netfilter/xt_DSCP.c
+++ b/net/netfilter/xt_DSCP.c
@@ -99,7 +99,7 @@
u_int8_t orig, nv;
orig = ipv6_get_dsfield(iph);
- nv = (orig & info->tos_mask) ^ info->tos_value;
+ nv = (orig & ~info->tos_mask) ^ info->tos_value;
if (orig != nv) {
if (!skb_make_writable(skb, sizeof(struct iphdr)))
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 481a86f..61805d7 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -272,11 +272,6 @@
{
int ret;
- if (strcmp(par->table, "raw") == 0) {
- pr_info("state is undetermined at the time of raw table\n");
- return -EINVAL;
- }
-
ret = nf_ct_l3proto_try_module_get(par->family);
if (ret < 0)
pr_info("cannot load conntrack support for proto=%u\n",
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 4327e10..846f895 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -62,13 +62,6 @@
[OSF_ATTR_FINGER] = { .len = sizeof(struct xt_osf_user_finger) },
};
-static void xt_osf_finger_free_rcu(struct rcu_head *rcu_head)
-{
- struct xt_osf_finger *f = container_of(rcu_head, struct xt_osf_finger, rcu_head);
-
- kfree(f);
-}
-
static int xt_osf_add_callback(struct sock *ctnl, struct sk_buff *skb,
const struct nlmsghdr *nlh,
const struct nlattr * const osf_attrs[])
@@ -133,7 +126,7 @@
* We are protected by nfnl mutex.
*/
list_del_rcu(&sf->finger_entry);
- call_rcu(&sf->rcu_head, xt_osf_finger_free_rcu);
+ kfree_rcu(sf, rcu_head);
err = 0;
break;
@@ -414,7 +407,7 @@
list_for_each_entry_rcu(f, &xt_osf_fingers[i], finger_entry) {
list_del_rcu(&f->finger_entry);
- call_rcu(&f->rcu_head, xt_osf_finger_free_rcu);
+ kfree_rcu(f, rcu_head);
}
}
rcu_read_unlock();
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 5f14c84..bae5756 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -422,7 +422,6 @@
{
int ret_val = -EINVAL;
- const char *type_str = "(unknown)";
struct netlbl_audit audit_info;
if (!info->attrs[NLBL_CIPSOV4_A_DOI] ||
@@ -432,15 +431,12 @@
netlbl_netlink_auditinfo(skb, &audit_info);
switch (nla_get_u32(info->attrs[NLBL_CIPSOV4_A_MTYPE])) {
case CIPSO_V4_MAP_TRANS:
- type_str = "trans";
ret_val = netlbl_cipsov4_add_std(info, &audit_info);
break;
case CIPSO_V4_MAP_PASS:
- type_str = "pass";
ret_val = netlbl_cipsov4_add_pass(info, &audit_info);
break;
case CIPSO_V4_MAP_LOCAL:
- type_str = "local";
ret_val = netlbl_cipsov4_add_local(info, &audit_info);
break;
}
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index e2b0a680..9c38658 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -154,44 +154,6 @@
*/
/**
- * netlbl_unlhsh_free_addr4 - Frees an IPv4 address entry from the hash table
- * @entry: the entry's RCU field
- *
- * Description:
- * This function is designed to be used as a callback to the call_rcu()
- * function so that memory allocated to a hash table address entry can be
- * released safely.
- *
- */
-static void netlbl_unlhsh_free_addr4(struct rcu_head *entry)
-{
- struct netlbl_unlhsh_addr4 *ptr;
-
- ptr = container_of(entry, struct netlbl_unlhsh_addr4, rcu);
- kfree(ptr);
-}
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-/**
- * netlbl_unlhsh_free_addr6 - Frees an IPv6 address entry from the hash table
- * @entry: the entry's RCU field
- *
- * Description:
- * This function is designed to be used as a callback to the call_rcu()
- * function so that memory allocated to a hash table address entry can be
- * released safely.
- *
- */
-static void netlbl_unlhsh_free_addr6(struct rcu_head *entry)
-{
- struct netlbl_unlhsh_addr6 *ptr;
-
- ptr = container_of(entry, struct netlbl_unlhsh_addr6, rcu);
- kfree(ptr);
-}
-#endif /* IPv6 */
-
-/**
* netlbl_unlhsh_free_iface - Frees an interface entry from the hash table
* @entry: the entry's RCU field
*
@@ -568,7 +530,7 @@
if (entry == NULL)
return -ENOENT;
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+ kfree_rcu(entry, rcu);
return 0;
}
@@ -629,7 +591,7 @@
if (entry == NULL)
return -ENOENT;
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+ kfree_rcu(entry, rcu);
return 0;
}
#endif /* IPv6 */
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index c8f35b5..5fe4f3b 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1566,12 +1566,6 @@
}
EXPORT_SYMBOL(netlink_kernel_release);
-
-static void listeners_free_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct listeners, rcu));
-}
-
int __netlink_change_ngroups(struct sock *sk, unsigned int groups)
{
struct listeners *new, *old;
@@ -1588,7 +1582,7 @@
memcpy(new->masks, old->masks, NLGRPSZ(tbl->groups));
rcu_assign_pointer(tbl->listeners, new);
- call_rcu(&old->rcu, listeners_free_rcu);
+ kfree_rcu(old, rcu);
}
tbl->groups = groups;
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 06cb027..732152f 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -591,7 +591,6 @@
return -EINVAL;
}
if ((dev = nr_dev_get(&addr->fsa_ax25.sax25_call)) == NULL) {
- SOCK_DEBUG(sk, "NET/ROM: bind failed: invalid node callsign\n");
release_sock(sk);
return -EADDRNOTAVAIL;
}
@@ -632,7 +631,7 @@
sock_reset_flag(sk, SOCK_ZAPPED);
dev_put(dev);
release_sock(sk);
- SOCK_DEBUG(sk, "NET/ROM: socket is bound\n");
+
return 0;
}
@@ -1082,8 +1081,6 @@
sax.sax25_call = nr->dest_addr;
}
- SOCK_DEBUG(sk, "NET/ROM: sendto: Addresses built.\n");
-
/* Build a packet - the conventional user limit is 236 bytes. We can
do ludicrously large NetROM frames but must not overflow */
if (len > 65536) {
@@ -1091,7 +1088,6 @@
goto out;
}
- SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n");
size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN;
if ((skb = sock_alloc_send_skb(sk, size, msg->msg_flags & MSG_DONTWAIT, &err)) == NULL)
@@ -1105,7 +1101,6 @@
*/
asmptr = skb_push(skb, NR_TRANSPORT_LEN);
- SOCK_DEBUG(sk, "Building NET/ROM Header.\n");
/* Build a NET/ROM Transport header */
@@ -1114,15 +1109,12 @@
*asmptr++ = 0; /* To be filled in later */
*asmptr++ = 0; /* Ditto */
*asmptr++ = NR_INFO;
- SOCK_DEBUG(sk, "Built header.\n");
/*
* Put the data on the end
*/
skb_put(skb, len);
- SOCK_DEBUG(sk, "NET/ROM: Appending user data\n");
-
/* User data follows immediately after the NET/ROM transport header */
if (memcpy_fromiovec(skb_transport_header(skb), msg->msg_iov, len)) {
kfree_skb(skb);
@@ -1130,8 +1122,6 @@
goto out;
}
- SOCK_DEBUG(sk, "NET/ROM: Transmitting buffer\n");
-
if (sk->sk_state != TCP_ESTABLISHED) {
kfree_skb(skb);
err = -ENOTCONN;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index b5362e9..549527b 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -538,7 +538,7 @@
rcu_read_lock();
filter = rcu_dereference(sk->sk_filter);
if (filter != NULL)
- res = sk_run_filter(skb, filter->insns);
+ res = SK_RUN_FILTER(filter, skb);
rcu_read_unlock();
return res;
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 947038d..d2df8f3 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -162,14 +162,6 @@
return err;
}
-static void phonet_device_rcu_free(struct rcu_head *head)
-{
- struct phonet_device *pnd;
-
- pnd = container_of(head, struct phonet_device, rcu);
- kfree(pnd);
-}
-
int phonet_address_del(struct net_device *dev, u8 addr)
{
struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
@@ -188,7 +180,7 @@
mutex_unlock(&pndevs->lock);
if (pnd)
- call_rcu(&pnd->rcu, phonet_device_rcu_free);
+ kfree_rcu(pnd, rcu);
return err;
}
@@ -426,18 +418,14 @@
return 0;
}
-struct net_device *phonet_route_get(struct net *net, u8 daddr)
+struct net_device *phonet_route_get_rcu(struct net *net, u8 daddr)
{
struct phonet_net *pnn = phonet_pernet(net);
struct phonet_routes *routes = &pnn->routes;
struct net_device *dev;
- ASSERT_RTNL(); /* no need to hold the device */
-
daddr >>= 2;
- rcu_read_lock();
dev = rcu_dereference(routes->table[daddr]);
- rcu_read_unlock();
return dev;
}
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index 58b3b1f..438accb 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -264,10 +264,11 @@
struct net *net = sock_net(skb->sk);
u8 addr, addr_idx = 0, addr_start_idx = cb->args[0];
+ rcu_read_lock();
for (addr = 0; addr < 64; addr++) {
struct net_device *dev;
- dev = phonet_route_get(net, addr << 2);
+ dev = phonet_route_get_rcu(net, addr << 2);
if (!dev)
continue;
@@ -279,6 +280,7 @@
}
out:
+ rcu_read_unlock();
cb->args[0] = addr_idx;
cb->args[1] = 0;
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index b1adafa..8c5bfce 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -52,7 +52,7 @@
static struct {
struct hlist_head hlist[PN_HASHSIZE];
- spinlock_t lock;
+ struct mutex lock;
} pnsocks;
void __init pn_sock_init(void)
@@ -61,7 +61,7 @@
for (i = 0; i < PN_HASHSIZE; i++)
INIT_HLIST_HEAD(pnsocks.hlist + i);
- spin_lock_init(&pnsocks.lock);
+ mutex_init(&pnsocks.lock);
}
static struct hlist_head *pn_hash_list(u16 obj)
@@ -82,9 +82,8 @@
u8 res = spn->spn_resource;
struct hlist_head *hlist = pn_hash_list(obj);
- spin_lock_bh(&pnsocks.lock);
-
- sk_for_each(sknode, node, hlist) {
+ rcu_read_lock();
+ sk_for_each_rcu(sknode, node, hlist) {
struct pn_sock *pn = pn_sk(sknode);
BUG_ON(!pn->sobject); /* unbound socket */
@@ -107,8 +106,7 @@
sock_hold(sknode);
break;
}
-
- spin_unlock_bh(&pnsocks.lock);
+ rcu_read_unlock();
return rval;
}
@@ -119,7 +117,7 @@
struct hlist_head *hlist = pnsocks.hlist;
unsigned h;
- spin_lock(&pnsocks.lock);
+ rcu_read_lock();
for (h = 0; h < PN_HASHSIZE; h++) {
struct hlist_node *node;
struct sock *sknode;
@@ -140,25 +138,26 @@
}
hlist++;
}
- spin_unlock(&pnsocks.lock);
+ rcu_read_unlock();
}
void pn_sock_hash(struct sock *sk)
{
struct hlist_head *hlist = pn_hash_list(pn_sk(sk)->sobject);
- spin_lock_bh(&pnsocks.lock);
- sk_add_node(sk, hlist);
- spin_unlock_bh(&pnsocks.lock);
+ mutex_lock(&pnsocks.lock);
+ sk_add_node_rcu(sk, hlist);
+ mutex_unlock(&pnsocks.lock);
}
EXPORT_SYMBOL(pn_sock_hash);
void pn_sock_unhash(struct sock *sk)
{
- spin_lock_bh(&pnsocks.lock);
- sk_del_node_init(sk);
- spin_unlock_bh(&pnsocks.lock);
+ mutex_lock(&pnsocks.lock);
+ sk_del_node_init_rcu(sk);
+ mutex_unlock(&pnsocks.lock);
pn_sock_unbind_all_res(sk);
+ synchronize_rcu();
}
EXPORT_SYMBOL(pn_sock_unhash);
@@ -548,7 +547,7 @@
unsigned h;
for (h = 0; h < PN_HASHSIZE; h++) {
- sk_for_each(sknode, node, hlist) {
+ sk_for_each_rcu(sknode, node, hlist) {
if (!net_eq(net, sock_net(sknode)))
continue;
if (!pos)
@@ -572,9 +571,9 @@
}
static void *pn_sock_seq_start(struct seq_file *seq, loff_t *pos)
- __acquires(pnsocks.lock)
+ __acquires(rcu)
{
- spin_lock_bh(&pnsocks.lock);
+ rcu_read_lock();
return *pos ? pn_sock_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
}
@@ -591,9 +590,9 @@
}
static void pn_sock_seq_stop(struct seq_file *seq, void *v)
- __releases(pnsocks.lock)
+ __releases(rcu)
{
- spin_unlock_bh(&pnsocks.lock);
+ rcu_read_unlock();
}
static int pn_sock_seq_show(struct seq_file *seq, void *v)
@@ -721,13 +720,11 @@
}
mutex_unlock(&resource_mutex);
- if (match == 0)
- return;
- synchronize_rcu();
while (match > 0) {
- sock_put(sk);
+ __sock_put(sk);
match--;
}
+ /* Caller is responsible for RCU sync before final sock_put() */
}
#ifdef CONFIG_PROC_FS
diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig
index 7fce6df..48464ca 100644
--- a/net/rfkill/Kconfig
+++ b/net/rfkill/Kconfig
@@ -22,3 +22,14 @@
depends on RFKILL
depends on INPUT = y || RFKILL = INPUT
default y if !EXPERT
+
+config RFKILL_REGULATOR
+ tristate "Generic rfkill regulator driver"
+ depends on RFKILL || !RFKILL
+ depends on REGULATOR
+ help
+ This options enable controlling radio transmitters connected to
+ voltage regulator using the regulator framework.
+
+ To compile this driver as a module, choose M here: the module will
+ be called rfkill-regulator.
diff --git a/net/rfkill/Makefile b/net/rfkill/Makefile
index 6621053..d9a5a58 100644
--- a/net/rfkill/Makefile
+++ b/net/rfkill/Makefile
@@ -5,3 +5,4 @@
rfkill-y += core.o
rfkill-$(CONFIG_RFKILL_INPUT) += input.o
obj-$(CONFIG_RFKILL) += rfkill.o
+obj-$(CONFIG_RFKILL_REGULATOR) += rfkill-regulator.o
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 0198191..be90640 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -1024,7 +1024,6 @@
* start getting events from elsewhere but hold mtx to get
* startup events added first
*/
- list_add(&data->list, &rfkill_fds);
list_for_each_entry(rfkill, &rfkill_list, node) {
ev = kzalloc(sizeof(*ev), GFP_KERNEL);
@@ -1033,6 +1032,7 @@
rfkill_fill_event(&ev->ev, rfkill, RFKILL_OP_ADD);
list_add_tail(&ev->list, &data->events);
}
+ list_add(&data->list, &rfkill_fds);
mutex_unlock(&data->mtx);
mutex_unlock(&rfkill_global_mutex);
diff --git a/net/rfkill/rfkill-regulator.c b/net/rfkill/rfkill-regulator.c
new file mode 100644
index 0000000..18dc512
--- /dev/null
+++ b/net/rfkill/rfkill-regulator.c
@@ -0,0 +1,164 @@
+/*
+ * rfkill-regulator.c - Regulator consumer driver for rfkill
+ *
+ * Copyright (C) 2009 Guiming Zhuo <gmzhuo@gmail.com>
+ * Copyright (C) 2011 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * Implementation inspired by leds-regulator driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/rfkill.h>
+#include <linux/rfkill-regulator.h>
+
+struct rfkill_regulator_data {
+ struct rfkill *rf_kill;
+ bool reg_enabled;
+
+ struct regulator *vcc;
+};
+
+static int rfkill_regulator_set_block(void *data, bool blocked)
+{
+ struct rfkill_regulator_data *rfkill_data = data;
+
+ pr_debug("%s: blocked: %d\n", __func__, blocked);
+
+ if (blocked) {
+ if (rfkill_data->reg_enabled) {
+ regulator_disable(rfkill_data->vcc);
+ rfkill_data->reg_enabled = 0;
+ }
+ } else {
+ if (!rfkill_data->reg_enabled) {
+ regulator_enable(rfkill_data->vcc);
+ rfkill_data->reg_enabled = 1;
+ }
+ }
+
+ pr_debug("%s: regulator_is_enabled after set_block: %d\n", __func__,
+ regulator_is_enabled(rfkill_data->vcc));
+
+ return 0;
+}
+
+struct rfkill_ops rfkill_regulator_ops = {
+ .set_block = rfkill_regulator_set_block,
+};
+
+static int __devinit rfkill_regulator_probe(struct platform_device *pdev)
+{
+ struct rfkill_regulator_platform_data *pdata = pdev->dev.platform_data;
+ struct rfkill_regulator_data *rfkill_data;
+ struct regulator *vcc;
+ struct rfkill *rf_kill;
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ if (pdata->name == NULL || pdata->type == 0) {
+ dev_err(&pdev->dev, "invalid name or type in platform data\n");
+ return -EINVAL;
+ }
+
+ vcc = regulator_get_exclusive(&pdev->dev, "vrfkill");
+ if (IS_ERR(vcc)) {
+ dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
+ ret = PTR_ERR(vcc);
+ goto out;
+ }
+
+ rfkill_data = kzalloc(sizeof(*rfkill_data), GFP_KERNEL);
+ if (rfkill_data == NULL) {
+ ret = -ENOMEM;
+ goto err_data_alloc;
+ }
+
+ rf_kill = rfkill_alloc(pdata->name, &pdev->dev,
+ pdata->type,
+ &rfkill_regulator_ops, rfkill_data);
+ if (rf_kill == NULL) {
+ dev_err(&pdev->dev, "Cannot alloc rfkill device\n");
+ ret = -ENOMEM;
+ goto err_rfkill_alloc;
+ }
+
+ if (regulator_is_enabled(vcc)) {
+ dev_dbg(&pdev->dev, "Regulator already enabled\n");
+ rfkill_data->reg_enabled = 1;
+ }
+ rfkill_data->vcc = vcc;
+ rfkill_data->rf_kill = rf_kill;
+
+ ret = rfkill_register(rf_kill);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot register rfkill device\n");
+ goto err_rfkill_register;
+ }
+
+ platform_set_drvdata(pdev, rfkill_data);
+ dev_info(&pdev->dev, "%s initialized\n", pdata->name);
+
+ return 0;
+
+err_rfkill_register:
+ rfkill_destroy(rf_kill);
+err_rfkill_alloc:
+ kfree(rfkill_data);
+err_data_alloc:
+ regulator_put(vcc);
+out:
+ return ret;
+}
+
+static int __devexit rfkill_regulator_remove(struct platform_device *pdev)
+{
+ struct rfkill_regulator_data *rfkill_data = platform_get_drvdata(pdev);
+ struct rfkill *rf_kill = rfkill_data->rf_kill;
+
+ rfkill_unregister(rf_kill);
+ rfkill_destroy(rf_kill);
+ regulator_put(rfkill_data->vcc);
+ kfree(rfkill_data);
+
+ return 0;
+}
+
+static struct platform_driver rfkill_regulator_driver = {
+ .probe = rfkill_regulator_probe,
+ .remove = __devexit_p(rfkill_regulator_remove),
+ .driver = {
+ .name = "rfkill-regulator",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rfkill_regulator_init(void)
+{
+ return platform_driver_register(&rfkill_regulator_driver);
+}
+module_init(rfkill_regulator_init);
+
+static void __exit rfkill_regulator_exit(void)
+{
+ platform_driver_unregister(&rfkill_regulator_driver);
+}
+module_exit(rfkill_regulator_exit);
+
+MODULE_AUTHOR("Guiming Zhuo <gmzhuo@gmail.com>");
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("Regulator consumer driver for rfkill");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rfkill-regulator");
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index a80aef6e..f9ea925 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -682,10 +682,8 @@
if ((unsigned int) addr->srose_ndigis > ROSE_MAX_DIGIS)
return -EINVAL;
- if ((dev = rose_dev_get(&addr->srose_addr)) == NULL) {
- SOCK_DEBUG(sk, "ROSE: bind failed: invalid address\n");
+ if ((dev = rose_dev_get(&addr->srose_addr)) == NULL)
return -EADDRNOTAVAIL;
- }
source = &addr->srose_call;
@@ -716,7 +714,7 @@
rose_insert_socket(sk);
sock_reset_flag(sk, SOCK_ZAPPED);
- SOCK_DEBUG(sk, "ROSE: socket is bound\n");
+
return 0;
}
@@ -1109,10 +1107,7 @@
srose.srose_digis[n] = rose->dest_digis[n];
}
- SOCK_DEBUG(sk, "ROSE: sendto: Addresses built.\n");
-
/* Build a packet */
- SOCK_DEBUG(sk, "ROSE: sendto: building packet.\n");
/* Sanity check the packet size */
if (len > 65535)
return -EMSGSIZE;
@@ -1127,7 +1122,6 @@
/*
* Put the data on the end
*/
- SOCK_DEBUG(sk, "ROSE: Appending user data\n");
skb_reset_transport_header(skb);
skb_put(skb, len);
@@ -1152,8 +1146,6 @@
*/
asmptr = skb_push(skb, ROSE_MIN_LEN);
- SOCK_DEBUG(sk, "ROSE: Building Network Header.\n");
-
/* Build a ROSE Network header */
asmptr[0] = ((rose->lci >> 8) & 0x0F) | ROSE_GFI;
asmptr[1] = (rose->lci >> 0) & 0xFF;
@@ -1162,10 +1154,6 @@
if (qbit)
asmptr[0] |= ROSE_Q_BIT;
- SOCK_DEBUG(sk, "ROSE: Built header.\n");
-
- SOCK_DEBUG(sk, "ROSE: Transmitting buffer\n");
-
if (sk->sk_state != TCP_ESTABLISHED) {
kfree_skb(skb);
return -ENOTCONN;
diff --git a/net/rxrpc/ar-ack.c b/net/rxrpc/ar-ack.c
index b6ffe4e..f99cfce 100644
--- a/net/rxrpc/ar-ack.c
+++ b/net/rxrpc/ar-ack.c
@@ -375,7 +375,6 @@
*/
static void rxrpc_rotate_tx_window(struct rxrpc_call *call, u32 hard)
{
- struct rxrpc_skb_priv *sp;
unsigned long _skb;
int tail = call->acks_tail, old_tail;
int win = CIRC_CNT(call->acks_head, tail, call->acks_winsz);
@@ -387,7 +386,6 @@
while (call->acks_hard < hard) {
smp_read_barrier_depends();
_skb = call->acks_window[tail] & ~1;
- sp = rxrpc_skb((struct sk_buff *) _skb);
rxrpc_free_skb((struct sk_buff *) _skb);
old_tail = tail;
tail = (tail + 1) & (call->acks_winsz - 1);
diff --git a/net/rxrpc/ar-connevent.c b/net/rxrpc/ar-connevent.c
index 0505cdc..e7ed43a 100644
--- a/net/rxrpc/ar-connevent.c
+++ b/net/rxrpc/ar-connevent.c
@@ -259,7 +259,6 @@
{
struct rxrpc_connection *conn =
container_of(work, struct rxrpc_connection, processor);
- struct rxrpc_skb_priv *sp;
struct sk_buff *skb;
u32 abort_code = RX_PROTOCOL_ERROR;
int ret;
@@ -276,8 +275,6 @@
/* go through the conn-level event packets, releasing the ref on this
* connection that each one has when we've finished with it */
while ((skb = skb_dequeue(&conn->rx_queue))) {
- sp = rxrpc_skb(skb);
-
ret = rxrpc_process_event(conn, skb, &abort_code);
switch (ret) {
case -EPROTO:
diff --git a/net/rxrpc/ar-error.c b/net/rxrpc/ar-error.c
index d4d1ae2..5d6b572 100644
--- a/net/rxrpc/ar-error.c
+++ b/net/rxrpc/ar-error.c
@@ -139,7 +139,7 @@
struct rxrpc_transport *trans =
container_of(work, struct rxrpc_transport, error_handler);
struct sk_buff *skb;
- int local, err;
+ int err;
_enter("");
@@ -157,7 +157,6 @@
switch (ee->ee_origin) {
case SO_EE_ORIGIN_ICMP:
- local = 0;
switch (ee->ee_type) {
case ICMP_DEST_UNREACH:
switch (ee->ee_code) {
@@ -207,7 +206,6 @@
case SO_EE_ORIGIN_LOCAL:
_proto("Rx Received local error { error=%d }",
ee->ee_errno);
- local = 1;
break;
case SO_EE_ORIGIN_NONE:
@@ -215,7 +213,6 @@
default:
_proto("Rx Received error report { orig=%u }",
ee->ee_origin);
- local = 0;
break;
}
diff --git a/net/rxrpc/ar-peer.c b/net/rxrpc/ar-peer.c
index 55b93dc..2754f09 100644
--- a/net/rxrpc/ar-peer.c
+++ b/net/rxrpc/ar-peer.c
@@ -36,10 +36,11 @@
static void rxrpc_assess_MTU_size(struct rxrpc_peer *peer)
{
struct rtable *rt;
+ struct flowi4 fl4;
peer->if_mtu = 1500;
- rt = ip_route_output_ports(&init_net, NULL,
+ rt = ip_route_output_ports(&init_net, &fl4, NULL,
peer->srx.transport.sin.sin_addr.s_addr, 0,
htons(7000), htons(7001),
IPPROTO_UDP, 0, 0);
@@ -156,6 +157,7 @@
/* we can now add the new candidate to the list */
peer = candidate;
candidate = NULL;
+ usage = atomic_read(&peer->usage);
list_add_tail(&peer->link, &rxrpc_peers);
write_unlock_bh(&rxrpc_peer_lock);
@@ -170,7 +172,7 @@
&peer->srx.transport.sin.sin_addr,
ntohs(peer->srx.transport.sin.sin_port));
- _leave(" = %p {u=%d}", peer, atomic_read(&peer->usage));
+ _leave(" = %p {u=%d}", peer, usage);
return peer;
/* we found the peer in the list immediately */
diff --git a/net/rxrpc/ar-transport.c b/net/rxrpc/ar-transport.c
index 5e0226f..92df566 100644
--- a/net/rxrpc/ar-transport.c
+++ b/net/rxrpc/ar-transport.c
@@ -111,6 +111,7 @@
/* we can now add the new candidate to the list */
trans = candidate;
candidate = NULL;
+ usage = atomic_read(&trans->usage);
rxrpc_get_local(trans->local);
atomic_inc(&trans->peer->usage);
@@ -125,7 +126,7 @@
trans->local->debug_id,
trans->peer->debug_id);
- _leave(" = %p {u=%d}", trans, atomic_read(&trans->usage));
+ _leave(" = %p {u=%d}", trans, usage);
return trans;
/* we found the transport in the list immediately */
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index a7a5583d..2590e91 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -239,6 +239,17 @@
To compile this code as a module, choose M here: the
module will be called sch_choke.
+config NET_SCH_QFQ
+ tristate "Quick Fair Queueing scheduler (QFQ)"
+ help
+ Say Y here if you want to use the Quick Fair Queueing Scheduler (QFQ)
+ packet scheduling algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_qfq.
+
+ If unsure, say N.
+
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
depends on NET_CLS_ACT
@@ -277,6 +288,7 @@
config NET_CLS_ROUTE4
tristate "Routing decision (ROUTE)"
+ depends on INET
select IP_ROUTE_CLASSID
select NET_CLS
---help---
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 2e77b8d..dc5889c 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -35,6 +35,7 @@
obj-$(CONFIG_NET_SCH_DRR) += sch_drr.o
obj-$(CONFIG_NET_SCH_MQPRIO) += sch_mqprio.o
obj-$(CONFIG_NET_SCH_CHOKE) += sch_choke.o
+obj-$(CONFIG_NET_SCH_QFQ) += sch_qfq.o
obj-$(CONFIG_NET_CLS_U32) += cls_u32.o
obj-$(CONFIG_NET_CLS_ROUTE4) += cls_route.o
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 14b42f4..a606025 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -26,11 +26,6 @@
#include <net/act_api.h>
#include <net/netlink.h>
-static void tcf_common_free_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct tcf_common, tcfc_rcu));
-}
-
void tcf_hash_destroy(struct tcf_common *p, struct tcf_hashinfo *hinfo)
{
unsigned int h = tcf_hash(p->tcfc_index, hinfo->hmask);
@@ -47,7 +42,7 @@
* gen_estimator est_timer() might access p->tcfc_lock
* or bstats, wait a RCU grace period before freeing p
*/
- call_rcu(&p->tcfc_rcu, tcf_common_free_rcu);
+ kfree_rcu(p, tcfc_rcu);
return;
}
}
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 8a16307..b3b9b32 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -96,11 +96,6 @@
goto done;
}
-static void tcf_police_free_rcu(struct rcu_head *head)
-{
- kfree(container_of(head, struct tcf_police, tcf_rcu));
-}
-
static void tcf_police_destroy(struct tcf_police *p)
{
unsigned int h = tcf_hash(p->tcf_index, POL_TAB_MASK);
@@ -121,7 +116,7 @@
* gen_estimator est_timer() might access p->tcf_lock
* or bstats, wait a RCU grace period before freeing p
*/
- call_rcu(&p->tcf_rcu, tcf_police_free_rcu);
+ kfree_rcu(p, tcf_rcu);
return;
}
}
@@ -401,7 +396,6 @@
police_cleanup_module(void)
{
tcf_unregister_action(&act_police_ops);
- rcu_barrier(); /* Wait for completion of call_rcu()'s (tcf_police_free_rcu) */
}
module_init(police_init_module);
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 7490f3f..6b86276 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1673,10 +1673,8 @@
{
int err = 0;
#ifdef CONFIG_NET_CLS_ACT
- __be16 protocol;
struct tcf_proto *otp = tp;
reclassify:
- protocol = skb->protocol;
#endif
err = tc_classify_compat(skb, tp, res);
diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
new file mode 100644
index 0000000..1033434
--- /dev/null
+++ b/net/sched/sch_qfq.c
@@ -0,0 +1,1137 @@
+/*
+ * net/sched/sch_qfq.c Quick Fair Queueing Scheduler.
+ *
+ * Copyright (c) 2009 Fabio Checconi, Luigi Rizzo, and Paolo Valente.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/pkt_sched.h>
+#include <net/sch_generic.h>
+#include <net/pkt_sched.h>
+#include <net/pkt_cls.h>
+
+
+/* Quick Fair Queueing
+ ===================
+
+ Sources:
+
+ Fabio Checconi, Luigi Rizzo, and Paolo Valente: "QFQ: Efficient
+ Packet Scheduling with Tight Bandwidth Distribution Guarantees."
+
+ See also:
+ http://retis.sssup.it/~fabio/linux/qfq/
+ */
+
+/*
+
+ Virtual time computations.
+
+ S, F and V are all computed in fixed point arithmetic with
+ FRAC_BITS decimal bits.
+
+ QFQ_MAX_INDEX is the maximum index allowed for a group. We need
+ one bit per index.
+ QFQ_MAX_WSHIFT is the maximum power of two supported as a weight.
+
+ The layout of the bits is as below:
+
+ [ MTU_SHIFT ][ FRAC_BITS ]
+ [ MAX_INDEX ][ MIN_SLOT_SHIFT ]
+ ^.__grp->index = 0
+ *.__grp->slot_shift
+
+ where MIN_SLOT_SHIFT is derived by difference from the others.
+
+ The max group index corresponds to Lmax/w_min, where
+ Lmax=1<<MTU_SHIFT, w_min = 1 .
+ From this, and knowing how many groups (MAX_INDEX) we want,
+ we can derive the shift corresponding to each group.
+
+ Because we often need to compute
+ F = S + len/w_i and V = V + len/wsum
+ instead of storing w_i store the value
+ inv_w = (1<<FRAC_BITS)/w_i
+ so we can do F = S + len * inv_w * wsum.
+ We use W_TOT in the formulas so we can easily move between
+ static and adaptive weight sum.
+
+ The per-scheduler-instance data contain all the data structures
+ for the scheduler: bitmaps and bucket lists.
+
+ */
+
+/*
+ * Maximum number of consecutive slots occupied by backlogged classes
+ * inside a group.
+ */
+#define QFQ_MAX_SLOTS 32
+
+/*
+ * Shifts used for class<->group mapping. We allow class weights that are
+ * in the range [1, 2^MAX_WSHIFT], and we try to map each class i to the
+ * group with the smallest index that can support the L_i / r_i configured
+ * for the class.
+ *
+ * grp->index is the index of the group; and grp->slot_shift
+ * is the shift for the corresponding (scaled) sigma_i.
+ */
+#define QFQ_MAX_INDEX 19
+#define QFQ_MAX_WSHIFT 16
+
+#define QFQ_MAX_WEIGHT (1<<QFQ_MAX_WSHIFT)
+#define QFQ_MAX_WSUM (2*QFQ_MAX_WEIGHT)
+
+#define FRAC_BITS 30 /* fixed point arithmetic */
+#define ONE_FP (1UL << FRAC_BITS)
+#define IWSUM (ONE_FP/QFQ_MAX_WSUM)
+
+#define QFQ_MTU_SHIFT 11
+#define QFQ_MIN_SLOT_SHIFT (FRAC_BITS + QFQ_MTU_SHIFT - QFQ_MAX_INDEX)
+
+/*
+ * Possible group states. These values are used as indexes for the bitmaps
+ * array of struct qfq_queue.
+ */
+enum qfq_state { ER, IR, EB, IB, QFQ_MAX_STATE };
+
+struct qfq_group;
+
+struct qfq_class {
+ struct Qdisc_class_common common;
+
+ unsigned int refcnt;
+ unsigned int filter_cnt;
+
+ struct gnet_stats_basic_packed bstats;
+ struct gnet_stats_queue qstats;
+ struct gnet_stats_rate_est rate_est;
+ struct Qdisc *qdisc;
+
+ struct hlist_node next; /* Link for the slot list. */
+ u64 S, F; /* flow timestamps (exact) */
+
+ /* group we belong to. In principle we would need the index,
+ * which is log_2(lmax/weight), but we never reference it
+ * directly, only the group.
+ */
+ struct qfq_group *grp;
+
+ /* these are copied from the flowset. */
+ u32 inv_w; /* ONE_FP/weight */
+ u32 lmax; /* Max packet size for this flow. */
+};
+
+struct qfq_group {
+ u64 S, F; /* group timestamps (approx). */
+ unsigned int slot_shift; /* Slot shift. */
+ unsigned int index; /* Group index. */
+ unsigned int front; /* Index of the front slot. */
+ unsigned long full_slots; /* non-empty slots */
+
+ /* Array of RR lists of active classes. */
+ struct hlist_head slots[QFQ_MAX_SLOTS];
+};
+
+struct qfq_sched {
+ struct tcf_proto *filter_list;
+ struct Qdisc_class_hash clhash;
+
+ u64 V; /* Precise virtual time. */
+ u32 wsum; /* weight sum */
+
+ unsigned long bitmaps[QFQ_MAX_STATE]; /* Group bitmaps. */
+ struct qfq_group groups[QFQ_MAX_INDEX + 1]; /* The groups. */
+};
+
+static struct qfq_class *qfq_find_class(struct Qdisc *sch, u32 classid)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct Qdisc_class_common *clc;
+
+ clc = qdisc_class_find(&q->clhash, classid);
+ if (clc == NULL)
+ return NULL;
+ return container_of(clc, struct qfq_class, common);
+}
+
+static void qfq_purge_queue(struct qfq_class *cl)
+{
+ unsigned int len = cl->qdisc->q.qlen;
+
+ qdisc_reset(cl->qdisc);
+ qdisc_tree_decrease_qlen(cl->qdisc, len);
+}
+
+static const struct nla_policy qfq_policy[TCA_QFQ_MAX + 1] = {
+ [TCA_QFQ_WEIGHT] = { .type = NLA_U32 },
+ [TCA_QFQ_LMAX] = { .type = NLA_U32 },
+};
+
+/*
+ * Calculate a flow index, given its weight and maximum packet length.
+ * index = log_2(maxlen/weight) but we need to apply the scaling.
+ * This is used only once at flow creation.
+ */
+static int qfq_calc_index(u32 inv_w, unsigned int maxlen)
+{
+ u64 slot_size = (u64)maxlen * inv_w;
+ unsigned long size_map;
+ int index = 0;
+
+ size_map = slot_size >> QFQ_MIN_SLOT_SHIFT;
+ if (!size_map)
+ goto out;
+
+ index = __fls(size_map) + 1; /* basically a log_2 */
+ index -= !(slot_size - (1ULL << (index + QFQ_MIN_SLOT_SHIFT - 1)));
+
+ if (index < 0)
+ index = 0;
+out:
+ pr_debug("qfq calc_index: W = %lu, L = %u, I = %d\n",
+ (unsigned long) ONE_FP/inv_w, maxlen, index);
+
+ return index;
+}
+
+static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
+ struct nlattr **tca, unsigned long *arg)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_class *cl = (struct qfq_class *)*arg;
+ struct nlattr *tb[TCA_QFQ_MAX + 1];
+ u32 weight, lmax, inv_w;
+ int i, err;
+
+ if (tca[TCA_OPTIONS] == NULL) {
+ pr_notice("qfq: no options\n");
+ return -EINVAL;
+ }
+
+ err = nla_parse_nested(tb, TCA_QFQ_MAX, tca[TCA_OPTIONS], qfq_policy);
+ if (err < 0)
+ return err;
+
+ if (tb[TCA_QFQ_WEIGHT]) {
+ weight = nla_get_u32(tb[TCA_QFQ_WEIGHT]);
+ if (!weight || weight > (1UL << QFQ_MAX_WSHIFT)) {
+ pr_notice("qfq: invalid weight %u\n", weight);
+ return -EINVAL;
+ }
+ } else
+ weight = 1;
+
+ inv_w = ONE_FP / weight;
+ weight = ONE_FP / inv_w;
+ if (q->wsum + weight > QFQ_MAX_WSUM) {
+ pr_notice("qfq: total weight out of range (%u + %u)\n",
+ weight, q->wsum);
+ return -EINVAL;
+ }
+
+ if (tb[TCA_QFQ_LMAX]) {
+ lmax = nla_get_u32(tb[TCA_QFQ_LMAX]);
+ if (!lmax || lmax > (1UL << QFQ_MTU_SHIFT)) {
+ pr_notice("qfq: invalid max length %u\n", lmax);
+ return -EINVAL;
+ }
+ } else
+ lmax = 1UL << QFQ_MTU_SHIFT;
+
+ if (cl != NULL) {
+ if (tca[TCA_RATE]) {
+ err = gen_replace_estimator(&cl->bstats, &cl->rate_est,
+ qdisc_root_sleeping_lock(sch),
+ tca[TCA_RATE]);
+ if (err)
+ return err;
+ }
+
+ sch_tree_lock(sch);
+ if (tb[TCA_QFQ_WEIGHT]) {
+ q->wsum = weight - ONE_FP / cl->inv_w;
+ cl->inv_w = inv_w;
+ }
+ sch_tree_unlock(sch);
+
+ return 0;
+ }
+
+ cl = kzalloc(sizeof(struct qfq_class), GFP_KERNEL);
+ if (cl == NULL)
+ return -ENOBUFS;
+
+ cl->refcnt = 1;
+ cl->common.classid = classid;
+ cl->lmax = lmax;
+ cl->inv_w = inv_w;
+ i = qfq_calc_index(cl->inv_w, cl->lmax);
+
+ cl->grp = &q->groups[i];
+ q->wsum += weight;
+
+ cl->qdisc = qdisc_create_dflt(sch->dev_queue,
+ &pfifo_qdisc_ops, classid);
+ if (cl->qdisc == NULL)
+ cl->qdisc = &noop_qdisc;
+
+ if (tca[TCA_RATE]) {
+ err = gen_new_estimator(&cl->bstats, &cl->rate_est,
+ qdisc_root_sleeping_lock(sch),
+ tca[TCA_RATE]);
+ if (err) {
+ qdisc_destroy(cl->qdisc);
+ kfree(cl);
+ return err;
+ }
+ }
+
+ sch_tree_lock(sch);
+ qdisc_class_hash_insert(&q->clhash, &cl->common);
+ sch_tree_unlock(sch);
+
+ qdisc_class_hash_grow(sch, &q->clhash);
+
+ *arg = (unsigned long)cl;
+ return 0;
+}
+
+static void qfq_destroy_class(struct Qdisc *sch, struct qfq_class *cl)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+
+ if (cl->inv_w) {
+ q->wsum -= ONE_FP / cl->inv_w;
+ cl->inv_w = 0;
+ }
+
+ gen_kill_estimator(&cl->bstats, &cl->rate_est);
+ qdisc_destroy(cl->qdisc);
+ kfree(cl);
+}
+
+static int qfq_delete_class(struct Qdisc *sch, unsigned long arg)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_class *cl = (struct qfq_class *)arg;
+
+ if (cl->filter_cnt > 0)
+ return -EBUSY;
+
+ sch_tree_lock(sch);
+
+ qfq_purge_queue(cl);
+ qdisc_class_hash_remove(&q->clhash, &cl->common);
+
+ BUG_ON(--cl->refcnt == 0);
+ /*
+ * This shouldn't happen: we "hold" one cops->get() when called
+ * from tc_ctl_tclass; the destroy method is done from cops->put().
+ */
+
+ sch_tree_unlock(sch);
+ return 0;
+}
+
+static unsigned long qfq_get_class(struct Qdisc *sch, u32 classid)
+{
+ struct qfq_class *cl = qfq_find_class(sch, classid);
+
+ if (cl != NULL)
+ cl->refcnt++;
+
+ return (unsigned long)cl;
+}
+
+static void qfq_put_class(struct Qdisc *sch, unsigned long arg)
+{
+ struct qfq_class *cl = (struct qfq_class *)arg;
+
+ if (--cl->refcnt == 0)
+ qfq_destroy_class(sch, cl);
+}
+
+static struct tcf_proto **qfq_tcf_chain(struct Qdisc *sch, unsigned long cl)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+
+ if (cl)
+ return NULL;
+
+ return &q->filter_list;
+}
+
+static unsigned long qfq_bind_tcf(struct Qdisc *sch, unsigned long parent,
+ u32 classid)
+{
+ struct qfq_class *cl = qfq_find_class(sch, classid);
+
+ if (cl != NULL)
+ cl->filter_cnt++;
+
+ return (unsigned long)cl;
+}
+
+static void qfq_unbind_tcf(struct Qdisc *sch, unsigned long arg)
+{
+ struct qfq_class *cl = (struct qfq_class *)arg;
+
+ cl->filter_cnt--;
+}
+
+static int qfq_graft_class(struct Qdisc *sch, unsigned long arg,
+ struct Qdisc *new, struct Qdisc **old)
+{
+ struct qfq_class *cl = (struct qfq_class *)arg;
+
+ if (new == NULL) {
+ new = qdisc_create_dflt(sch->dev_queue,
+ &pfifo_qdisc_ops, cl->common.classid);
+ if (new == NULL)
+ new = &noop_qdisc;
+ }
+
+ sch_tree_lock(sch);
+ qfq_purge_queue(cl);
+ *old = cl->qdisc;
+ cl->qdisc = new;
+ sch_tree_unlock(sch);
+ return 0;
+}
+
+static struct Qdisc *qfq_class_leaf(struct Qdisc *sch, unsigned long arg)
+{
+ struct qfq_class *cl = (struct qfq_class *)arg;
+
+ return cl->qdisc;
+}
+
+static int qfq_dump_class(struct Qdisc *sch, unsigned long arg,
+ struct sk_buff *skb, struct tcmsg *tcm)
+{
+ struct qfq_class *cl = (struct qfq_class *)arg;
+ struct nlattr *nest;
+
+ tcm->tcm_parent = TC_H_ROOT;
+ tcm->tcm_handle = cl->common.classid;
+ tcm->tcm_info = cl->qdisc->handle;
+
+ nest = nla_nest_start(skb, TCA_OPTIONS);
+ if (nest == NULL)
+ goto nla_put_failure;
+ NLA_PUT_U32(skb, TCA_QFQ_WEIGHT, ONE_FP/cl->inv_w);
+ NLA_PUT_U32(skb, TCA_QFQ_LMAX, cl->lmax);
+ return nla_nest_end(skb, nest);
+
+nla_put_failure:
+ nla_nest_cancel(skb, nest);
+ return -EMSGSIZE;
+}
+
+static int qfq_dump_class_stats(struct Qdisc *sch, unsigned long arg,
+ struct gnet_dump *d)
+{
+ struct qfq_class *cl = (struct qfq_class *)arg;
+ struct tc_qfq_stats xstats;
+
+ memset(&xstats, 0, sizeof(xstats));
+ cl->qdisc->qstats.qlen = cl->qdisc->q.qlen;
+
+ xstats.weight = ONE_FP/cl->inv_w;
+ xstats.lmax = cl->lmax;
+
+ if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
+ gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
+ gnet_stats_copy_queue(d, &cl->qdisc->qstats) < 0)
+ return -1;
+
+ return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
+}
+
+static void qfq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_class *cl;
+ struct hlist_node *n;
+ unsigned int i;
+
+ if (arg->stop)
+ return;
+
+ for (i = 0; i < q->clhash.hashsize; i++) {
+ hlist_for_each_entry(cl, n, &q->clhash.hash[i], common.hnode) {
+ if (arg->count < arg->skip) {
+ arg->count++;
+ continue;
+ }
+ if (arg->fn(sch, (unsigned long)cl, arg) < 0) {
+ arg->stop = 1;
+ return;
+ }
+ arg->count++;
+ }
+ }
+}
+
+static struct qfq_class *qfq_classify(struct sk_buff *skb, struct Qdisc *sch,
+ int *qerr)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_class *cl;
+ struct tcf_result res;
+ int result;
+
+ if (TC_H_MAJ(skb->priority ^ sch->handle) == 0) {
+ pr_debug("qfq_classify: found %d\n", skb->priority);
+ cl = qfq_find_class(sch, skb->priority);
+ if (cl != NULL)
+ return cl;
+ }
+
+ *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
+ result = tc_classify(skb, q->filter_list, &res);
+ if (result >= 0) {
+#ifdef CONFIG_NET_CLS_ACT
+ switch (result) {
+ case TC_ACT_QUEUED:
+ case TC_ACT_STOLEN:
+ *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
+ case TC_ACT_SHOT:
+ return NULL;
+ }
+#endif
+ cl = (struct qfq_class *)res.class;
+ if (cl == NULL)
+ cl = qfq_find_class(sch, res.classid);
+ return cl;
+ }
+
+ return NULL;
+}
+
+/* Generic comparison function, handling wraparound. */
+static inline int qfq_gt(u64 a, u64 b)
+{
+ return (s64)(a - b) > 0;
+}
+
+/* Round a precise timestamp to its slotted value. */
+static inline u64 qfq_round_down(u64 ts, unsigned int shift)
+{
+ return ts & ~((1ULL << shift) - 1);
+}
+
+/* return the pointer to the group with lowest index in the bitmap */
+static inline struct qfq_group *qfq_ffs(struct qfq_sched *q,
+ unsigned long bitmap)
+{
+ int index = __ffs(bitmap);
+ return &q->groups[index];
+}
+/* Calculate a mask to mimic what would be ffs_from(). */
+static inline unsigned long mask_from(unsigned long bitmap, int from)
+{
+ return bitmap & ~((1UL << from) - 1);
+}
+
+/*
+ * The state computation relies on ER=0, IR=1, EB=2, IB=3
+ * First compute eligibility comparing grp->S, q->V,
+ * then check if someone is blocking us and possibly add EB
+ */
+static int qfq_calc_state(struct qfq_sched *q, const struct qfq_group *grp)
+{
+ /* if S > V we are not eligible */
+ unsigned int state = qfq_gt(grp->S, q->V);
+ unsigned long mask = mask_from(q->bitmaps[ER], grp->index);
+ struct qfq_group *next;
+
+ if (mask) {
+ next = qfq_ffs(q, mask);
+ if (qfq_gt(grp->F, next->F))
+ state |= EB;
+ }
+
+ return state;
+}
+
+
+/*
+ * In principle
+ * q->bitmaps[dst] |= q->bitmaps[src] & mask;
+ * q->bitmaps[src] &= ~mask;
+ * but we should make sure that src != dst
+ */
+static inline void qfq_move_groups(struct qfq_sched *q, unsigned long mask,
+ int src, int dst)
+{
+ q->bitmaps[dst] |= q->bitmaps[src] & mask;
+ q->bitmaps[src] &= ~mask;
+}
+
+static void qfq_unblock_groups(struct qfq_sched *q, int index, u64 old_F)
+{
+ unsigned long mask = mask_from(q->bitmaps[ER], index + 1);
+ struct qfq_group *next;
+
+ if (mask) {
+ next = qfq_ffs(q, mask);
+ if (!qfq_gt(next->F, old_F))
+ return;
+ }
+
+ mask = (1UL << index) - 1;
+ qfq_move_groups(q, mask, EB, ER);
+ qfq_move_groups(q, mask, IB, IR);
+}
+
+/*
+ * perhaps
+ *
+ old_V ^= q->V;
+ old_V >>= QFQ_MIN_SLOT_SHIFT;
+ if (old_V) {
+ ...
+ }
+ *
+ */
+static void qfq_make_eligible(struct qfq_sched *q, u64 old_V)
+{
+ unsigned long vslot = q->V >> QFQ_MIN_SLOT_SHIFT;
+ unsigned long old_vslot = old_V >> QFQ_MIN_SLOT_SHIFT;
+
+ if (vslot != old_vslot) {
+ unsigned long mask = (1UL << fls(vslot ^ old_vslot)) - 1;
+ qfq_move_groups(q, mask, IR, ER);
+ qfq_move_groups(q, mask, IB, EB);
+ }
+}
+
+
+/*
+ * XXX we should make sure that slot becomes less than 32.
+ * This is guaranteed by the input values.
+ * roundedS is always cl->S rounded on grp->slot_shift bits.
+ */
+static void qfq_slot_insert(struct qfq_group *grp, struct qfq_class *cl,
+ u64 roundedS)
+{
+ u64 slot = (roundedS - grp->S) >> grp->slot_shift;
+ unsigned int i = (grp->front + slot) % QFQ_MAX_SLOTS;
+
+ hlist_add_head(&cl->next, &grp->slots[i]);
+ __set_bit(slot, &grp->full_slots);
+}
+
+/* Maybe introduce hlist_first_entry?? */
+static struct qfq_class *qfq_slot_head(struct qfq_group *grp)
+{
+ return hlist_entry(grp->slots[grp->front].first,
+ struct qfq_class, next);
+}
+
+/*
+ * remove the entry from the slot
+ */
+static void qfq_front_slot_remove(struct qfq_group *grp)
+{
+ struct qfq_class *cl = qfq_slot_head(grp);
+
+ BUG_ON(!cl);
+ hlist_del(&cl->next);
+ if (hlist_empty(&grp->slots[grp->front]))
+ __clear_bit(0, &grp->full_slots);
+}
+
+/*
+ * Returns the first full queue in a group. As a side effect,
+ * adjust the bucket list so the first non-empty bucket is at
+ * position 0 in full_slots.
+ */
+static struct qfq_class *qfq_slot_scan(struct qfq_group *grp)
+{
+ unsigned int i;
+
+ pr_debug("qfq slot_scan: grp %u full %#lx\n",
+ grp->index, grp->full_slots);
+
+ if (grp->full_slots == 0)
+ return NULL;
+
+ i = __ffs(grp->full_slots); /* zero based */
+ if (i > 0) {
+ grp->front = (grp->front + i) % QFQ_MAX_SLOTS;
+ grp->full_slots >>= i;
+ }
+
+ return qfq_slot_head(grp);
+}
+
+/*
+ * adjust the bucket list. When the start time of a group decreases,
+ * we move the index down (modulo QFQ_MAX_SLOTS) so we don't need to
+ * move the objects. The mask of occupied slots must be shifted
+ * because we use ffs() to find the first non-empty slot.
+ * This covers decreases in the group's start time, but what about
+ * increases of the start time ?
+ * Here too we should make sure that i is less than 32
+ */
+static void qfq_slot_rotate(struct qfq_group *grp, u64 roundedS)
+{
+ unsigned int i = (grp->S - roundedS) >> grp->slot_shift;
+
+ grp->full_slots <<= i;
+ grp->front = (grp->front - i) % QFQ_MAX_SLOTS;
+}
+
+static void qfq_update_eligible(struct qfq_sched *q, u64 old_V)
+{
+ struct qfq_group *grp;
+ unsigned long ineligible;
+
+ ineligible = q->bitmaps[IR] | q->bitmaps[IB];
+ if (ineligible) {
+ if (!q->bitmaps[ER]) {
+ grp = qfq_ffs(q, ineligible);
+ if (qfq_gt(grp->S, q->V))
+ q->V = grp->S;
+ }
+ qfq_make_eligible(q, old_V);
+ }
+}
+
+/* What is length of next packet in queue (0 if queue is empty) */
+static unsigned int qdisc_peek_len(struct Qdisc *sch)
+{
+ struct sk_buff *skb;
+
+ skb = sch->ops->peek(sch);
+ return skb ? qdisc_pkt_len(skb) : 0;
+}
+
+/*
+ * Updates the class, returns true if also the group needs to be updated.
+ */
+static bool qfq_update_class(struct qfq_group *grp, struct qfq_class *cl)
+{
+ unsigned int len = qdisc_peek_len(cl->qdisc);
+
+ cl->S = cl->F;
+ if (!len)
+ qfq_front_slot_remove(grp); /* queue is empty */
+ else {
+ u64 roundedS;
+
+ cl->F = cl->S + (u64)len * cl->inv_w;
+ roundedS = qfq_round_down(cl->S, grp->slot_shift);
+ if (roundedS == grp->S)
+ return false;
+
+ qfq_front_slot_remove(grp);
+ qfq_slot_insert(grp, cl, roundedS);
+ }
+
+ return true;
+}
+
+static struct sk_buff *qfq_dequeue(struct Qdisc *sch)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_group *grp;
+ struct qfq_class *cl;
+ struct sk_buff *skb;
+ unsigned int len;
+ u64 old_V;
+
+ if (!q->bitmaps[ER])
+ return NULL;
+
+ grp = qfq_ffs(q, q->bitmaps[ER]);
+
+ cl = qfq_slot_head(grp);
+ skb = qdisc_dequeue_peeked(cl->qdisc);
+ if (!skb) {
+ WARN_ONCE(1, "qfq_dequeue: non-workconserving leaf\n");
+ return NULL;
+ }
+
+ sch->q.qlen--;
+ qdisc_bstats_update(sch, skb);
+
+ old_V = q->V;
+ len = qdisc_pkt_len(skb);
+ q->V += (u64)len * IWSUM;
+ pr_debug("qfq dequeue: len %u F %lld now %lld\n",
+ len, (unsigned long long) cl->F, (unsigned long long) q->V);
+
+ if (qfq_update_class(grp, cl)) {
+ u64 old_F = grp->F;
+
+ cl = qfq_slot_scan(grp);
+ if (!cl)
+ __clear_bit(grp->index, &q->bitmaps[ER]);
+ else {
+ u64 roundedS = qfq_round_down(cl->S, grp->slot_shift);
+ unsigned int s;
+
+ if (grp->S == roundedS)
+ goto skip_unblock;
+ grp->S = roundedS;
+ grp->F = roundedS + (2ULL << grp->slot_shift);
+ __clear_bit(grp->index, &q->bitmaps[ER]);
+ s = qfq_calc_state(q, grp);
+ __set_bit(grp->index, &q->bitmaps[s]);
+ }
+
+ qfq_unblock_groups(q, grp->index, old_F);
+ }
+
+skip_unblock:
+ qfq_update_eligible(q, old_V);
+
+ return skb;
+}
+
+/*
+ * Assign a reasonable start time for a new flow k in group i.
+ * Admissible values for \hat(F) are multiples of \sigma_i
+ * no greater than V+\sigma_i . Larger values mean that
+ * we had a wraparound so we consider the timestamp to be stale.
+ *
+ * If F is not stale and F >= V then we set S = F.
+ * Otherwise we should assign S = V, but this may violate
+ * the ordering in ER. So, if we have groups in ER, set S to
+ * the F_j of the first group j which would be blocking us.
+ * We are guaranteed not to move S backward because
+ * otherwise our group i would still be blocked.
+ */
+static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl)
+{
+ unsigned long mask;
+ uint32_t limit, roundedF;
+ int slot_shift = cl->grp->slot_shift;
+
+ roundedF = qfq_round_down(cl->F, slot_shift);
+ limit = qfq_round_down(q->V, slot_shift) + (1UL << slot_shift);
+
+ if (!qfq_gt(cl->F, q->V) || qfq_gt(roundedF, limit)) {
+ /* timestamp was stale */
+ mask = mask_from(q->bitmaps[ER], cl->grp->index);
+ if (mask) {
+ struct qfq_group *next = qfq_ffs(q, mask);
+ if (qfq_gt(roundedF, next->F)) {
+ cl->S = next->F;
+ return;
+ }
+ }
+ cl->S = q->V;
+ } else /* timestamp is not stale */
+ cl->S = cl->F;
+}
+
+static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_group *grp;
+ struct qfq_class *cl;
+ int err;
+ u64 roundedS;
+ int s;
+
+ cl = qfq_classify(skb, sch, &err);
+ if (cl == NULL) {
+ if (err & __NET_XMIT_BYPASS)
+ sch->qstats.drops++;
+ kfree_skb(skb);
+ return err;
+ }
+ pr_debug("qfq_enqueue: cl = %x\n", cl->common.classid);
+
+ err = qdisc_enqueue(skb, cl->qdisc);
+ if (unlikely(err != NET_XMIT_SUCCESS)) {
+ pr_debug("qfq_enqueue: enqueue failed %d\n", err);
+ if (net_xmit_drop_count(err)) {
+ cl->qstats.drops++;
+ sch->qstats.drops++;
+ }
+ return err;
+ }
+
+ bstats_update(&cl->bstats, skb);
+ ++sch->q.qlen;
+
+ /* If the new skb is not the head of queue, then done here. */
+ if (cl->qdisc->q.qlen != 1)
+ return err;
+
+ /* If reach this point, queue q was idle */
+ grp = cl->grp;
+ qfq_update_start(q, cl);
+
+ /* compute new finish time and rounded start. */
+ cl->F = cl->S + (u64)qdisc_pkt_len(skb) * cl->inv_w;
+ roundedS = qfq_round_down(cl->S, grp->slot_shift);
+
+ /*
+ * insert cl in the correct bucket.
+ * If cl->S >= grp->S we don't need to adjust the
+ * bucket list and simply go to the insertion phase.
+ * Otherwise grp->S is decreasing, we must make room
+ * in the bucket list, and also recompute the group state.
+ * Finally, if there were no flows in this group and nobody
+ * was in ER make sure to adjust V.
+ */
+ if (grp->full_slots) {
+ if (!qfq_gt(grp->S, cl->S))
+ goto skip_update;
+
+ /* create a slot for this cl->S */
+ qfq_slot_rotate(grp, roundedS);
+ /* group was surely ineligible, remove */
+ __clear_bit(grp->index, &q->bitmaps[IR]);
+ __clear_bit(grp->index, &q->bitmaps[IB]);
+ } else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V))
+ q->V = roundedS;
+
+ grp->S = roundedS;
+ grp->F = roundedS + (2ULL << grp->slot_shift);
+ s = qfq_calc_state(q, grp);
+ __set_bit(grp->index, &q->bitmaps[s]);
+
+ pr_debug("qfq enqueue: new state %d %#lx S %lld F %lld V %lld\n",
+ s, q->bitmaps[s],
+ (unsigned long long) cl->S,
+ (unsigned long long) cl->F,
+ (unsigned long long) q->V);
+
+skip_update:
+ qfq_slot_insert(grp, cl, roundedS);
+
+ return err;
+}
+
+
+static void qfq_slot_remove(struct qfq_sched *q, struct qfq_group *grp,
+ struct qfq_class *cl)
+{
+ unsigned int i, offset;
+ u64 roundedS;
+
+ roundedS = qfq_round_down(cl->S, grp->slot_shift);
+ offset = (roundedS - grp->S) >> grp->slot_shift;
+ i = (grp->front + offset) % QFQ_MAX_SLOTS;
+
+ hlist_del(&cl->next);
+ if (hlist_empty(&grp->slots[i]))
+ __clear_bit(offset, &grp->full_slots);
+}
+
+/*
+ * called to forcibly destroy a queue.
+ * If the queue is not in the front bucket, or if it has
+ * other queues in the front bucket, we can simply remove
+ * the queue with no other side effects.
+ * Otherwise we must propagate the event up.
+ */
+static void qfq_deactivate_class(struct qfq_sched *q, struct qfq_class *cl)
+{
+ struct qfq_group *grp = cl->grp;
+ unsigned long mask;
+ u64 roundedS;
+ int s;
+
+ cl->F = cl->S;
+ qfq_slot_remove(q, grp, cl);
+
+ if (!grp->full_slots) {
+ __clear_bit(grp->index, &q->bitmaps[IR]);
+ __clear_bit(grp->index, &q->bitmaps[EB]);
+ __clear_bit(grp->index, &q->bitmaps[IB]);
+
+ if (test_bit(grp->index, &q->bitmaps[ER]) &&
+ !(q->bitmaps[ER] & ~((1UL << grp->index) - 1))) {
+ mask = q->bitmaps[ER] & ((1UL << grp->index) - 1);
+ if (mask)
+ mask = ~((1UL << __fls(mask)) - 1);
+ else
+ mask = ~0UL;
+ qfq_move_groups(q, mask, EB, ER);
+ qfq_move_groups(q, mask, IB, IR);
+ }
+ __clear_bit(grp->index, &q->bitmaps[ER]);
+ } else if (hlist_empty(&grp->slots[grp->front])) {
+ cl = qfq_slot_scan(grp);
+ roundedS = qfq_round_down(cl->S, grp->slot_shift);
+ if (grp->S != roundedS) {
+ __clear_bit(grp->index, &q->bitmaps[ER]);
+ __clear_bit(grp->index, &q->bitmaps[IR]);
+ __clear_bit(grp->index, &q->bitmaps[EB]);
+ __clear_bit(grp->index, &q->bitmaps[IB]);
+ grp->S = roundedS;
+ grp->F = roundedS + (2ULL << grp->slot_shift);
+ s = qfq_calc_state(q, grp);
+ __set_bit(grp->index, &q->bitmaps[s]);
+ }
+ }
+
+ qfq_update_eligible(q, q->V);
+}
+
+static void qfq_qlen_notify(struct Qdisc *sch, unsigned long arg)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_class *cl = (struct qfq_class *)arg;
+
+ if (cl->qdisc->q.qlen == 0)
+ qfq_deactivate_class(q, cl);
+}
+
+static unsigned int qfq_drop(struct Qdisc *sch)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_group *grp;
+ unsigned int i, j, len;
+
+ for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+ grp = &q->groups[i];
+ for (j = 0; j < QFQ_MAX_SLOTS; j++) {
+ struct qfq_class *cl;
+ struct hlist_node *n;
+
+ hlist_for_each_entry(cl, n, &grp->slots[j], next) {
+
+ if (!cl->qdisc->ops->drop)
+ continue;
+
+ len = cl->qdisc->ops->drop(cl->qdisc);
+ if (len > 0) {
+ sch->q.qlen--;
+ if (!cl->qdisc->q.qlen)
+ qfq_deactivate_class(q, cl);
+
+ return len;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int qfq_init_qdisc(struct Qdisc *sch, struct nlattr *opt)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_group *grp;
+ int i, j, err;
+
+ err = qdisc_class_hash_init(&q->clhash);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+ grp = &q->groups[i];
+ grp->index = i;
+ grp->slot_shift = QFQ_MTU_SHIFT + FRAC_BITS
+ - (QFQ_MAX_INDEX - i);
+ for (j = 0; j < QFQ_MAX_SLOTS; j++)
+ INIT_HLIST_HEAD(&grp->slots[j]);
+ }
+
+ return 0;
+}
+
+static void qfq_reset_qdisc(struct Qdisc *sch)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_group *grp;
+ struct qfq_class *cl;
+ struct hlist_node *n, *tmp;
+ unsigned int i, j;
+
+ for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+ grp = &q->groups[i];
+ for (j = 0; j < QFQ_MAX_SLOTS; j++) {
+ hlist_for_each_entry_safe(cl, n, tmp,
+ &grp->slots[j], next) {
+ qfq_deactivate_class(q, cl);
+ }
+ }
+ }
+
+ for (i = 0; i < q->clhash.hashsize; i++) {
+ hlist_for_each_entry(cl, n, &q->clhash.hash[i], common.hnode)
+ qdisc_reset(cl->qdisc);
+ }
+ sch->q.qlen = 0;
+}
+
+static void qfq_destroy_qdisc(struct Qdisc *sch)
+{
+ struct qfq_sched *q = qdisc_priv(sch);
+ struct qfq_class *cl;
+ struct hlist_node *n, *next;
+ unsigned int i;
+
+ tcf_destroy_chain(&q->filter_list);
+
+ for (i = 0; i < q->clhash.hashsize; i++) {
+ hlist_for_each_entry_safe(cl, n, next, &q->clhash.hash[i],
+ common.hnode) {
+ qfq_destroy_class(sch, cl);
+ }
+ }
+ qdisc_class_hash_destroy(&q->clhash);
+}
+
+static const struct Qdisc_class_ops qfq_class_ops = {
+ .change = qfq_change_class,
+ .delete = qfq_delete_class,
+ .get = qfq_get_class,
+ .put = qfq_put_class,
+ .tcf_chain = qfq_tcf_chain,
+ .bind_tcf = qfq_bind_tcf,
+ .unbind_tcf = qfq_unbind_tcf,
+ .graft = qfq_graft_class,
+ .leaf = qfq_class_leaf,
+ .qlen_notify = qfq_qlen_notify,
+ .dump = qfq_dump_class,
+ .dump_stats = qfq_dump_class_stats,
+ .walk = qfq_walk,
+};
+
+static struct Qdisc_ops qfq_qdisc_ops __read_mostly = {
+ .cl_ops = &qfq_class_ops,
+ .id = "qfq",
+ .priv_size = sizeof(struct qfq_sched),
+ .enqueue = qfq_enqueue,
+ .dequeue = qfq_dequeue,
+ .peek = qdisc_peek_dequeued,
+ .drop = qfq_drop,
+ .init = qfq_init_qdisc,
+ .reset = qfq_reset_qdisc,
+ .destroy = qfq_destroy_qdisc,
+ .owner = THIS_MODULE,
+};
+
+static int __init qfq_init(void)
+{
+ return register_qdisc(&qfq_qdisc_ops);
+}
+
+static void __exit qfq_exit(void)
+{
+ unregister_qdisc(&qfq_qdisc_ops);
+}
+
+module_init(qfq_init);
+module_exit(qfq_exit);
+MODULE_LICENSE("GPL");
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index c2e628d..7ef87f9 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -169,7 +169,7 @@
}
case htons(ETH_P_IPV6):
{
- struct ipv6hdr *iph;
+ const struct ipv6hdr *iph;
int poff;
if (!pskb_network_may_pull(skb, sizeof(*iph)))
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index faf71d1..83e3011c 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -140,14 +140,12 @@
/* Dispose of the address list. */
static void sctp_bind_addr_clean(struct sctp_bind_addr *bp)
{
- struct sctp_sockaddr_entry *addr;
- struct list_head *pos, *temp;
+ struct sctp_sockaddr_entry *addr, *temp;
/* Empty the bind address list. */
- list_for_each_safe(pos, temp, &bp->address_list) {
- addr = list_entry(pos, struct sctp_sockaddr_entry, list);
- list_del(pos);
- kfree(addr);
+ list_for_each_entry_safe(addr, temp, &bp->address_list, list) {
+ list_del_rcu(&addr->list);
+ kfree_rcu(addr, rcu);
SCTP_DBG_OBJCNT_DEC(addr);
}
}
@@ -219,7 +217,7 @@
}
if (found) {
- call_rcu(&addr->rcu, sctp_local_addr_free);
+ kfree_rcu(addr, rcu);
SCTP_DBG_OBJCNT_DEC(addr);
return 0;
}
diff --git a/net/sctp/debug.c b/net/sctp/debug.c
index bf24fa6..ec997cf 100644
--- a/net/sctp/debug.c
+++ b/net/sctp/debug.c
@@ -98,7 +98,6 @@
/* These are printable forms of the states. */
const char *const sctp_state_tbl[SCTP_STATE_NUM_STATES] = {
- "STATE_EMPTY",
"STATE_CLOSED",
"STATE_COOKIE_WAIT",
"STATE_COOKIE_ECHOED",
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index e10acc0..c8cc24e 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -325,6 +325,7 @@
struct sctp_transport **transport)
{
struct sctp_association *asoc = NULL;
+ struct sctp_association *tmp;
struct sctp_transport *t = NULL;
struct sctp_hashbucket *head;
struct sctp_ep_common *epb;
@@ -333,25 +334,32 @@
int rport;
*transport = NULL;
+
+ /* If the local port is not set, there can't be any associations
+ * on this endpoint.
+ */
+ if (!ep->base.bind_addr.port)
+ goto out;
+
rport = ntohs(paddr->v4.sin_port);
hash = sctp_assoc_hashfn(ep->base.bind_addr.port, rport);
head = &sctp_assoc_hashtable[hash];
read_lock(&head->lock);
sctp_for_each_hentry(epb, node, &head->chain) {
- asoc = sctp_assoc(epb);
- if (asoc->ep != ep || rport != asoc->peer.port)
- goto next;
+ tmp = sctp_assoc(epb);
+ if (tmp->ep != ep || rport != tmp->peer.port)
+ continue;
- t = sctp_assoc_lookup_paddr(asoc, paddr);
+ t = sctp_assoc_lookup_paddr(tmp, paddr);
if (t) {
+ asoc = tmp;
*transport = t;
break;
}
-next:
- asoc = NULL;
}
read_unlock(&head->lock);
+out:
return asoc;
}
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 5436c69..741ed16 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -565,7 +565,7 @@
*/
void sctp_v4_err(struct sk_buff *skb, __u32 info)
{
- struct iphdr *iph = (struct iphdr *)skb->data;
+ const struct iphdr *iph = (const struct iphdr *)skb->data;
const int ihlen = iph->ihl * 4;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
@@ -661,7 +661,6 @@
{
sctp_chunkhdr_t *ch;
__u8 *ch_end;
- sctp_errhdr_t *err;
ch = (sctp_chunkhdr_t *) skb->data;
@@ -697,20 +696,6 @@
if (SCTP_CID_INIT == ch->type && (void *)ch != skb->data)
goto discard;
- /* RFC 8.4, 7) If the packet contains a "Stale cookie" ERROR
- * or a COOKIE ACK the SCTP Packet should be silently
- * discarded.
- */
- if (SCTP_CID_COOKIE_ACK == ch->type)
- goto discard;
-
- if (SCTP_CID_ERROR == ch->type) {
- sctp_walk_errors(err, ch) {
- if (SCTP_ERROR_STALE_COOKIE == err->cause)
- goto discard;
- }
- }
-
ch = (sctp_chunkhdr_t *) ch_end;
} while (ch_end < skb_tail_pointer(skb));
@@ -1017,7 +1002,7 @@
/* Skip over the ADDIP header and find the Address parameter */
param = (union sctp_addr_param *)(asconf + 1);
- af = sctp_get_af_specific(param_type2af(param->v4.param_hdr.type));
+ af = sctp_get_af_specific(param_type2af(param->p.type));
if (unlikely(!af))
return NULL;
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 865ce7b..0bb0d7c 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -80,6 +80,13 @@
#include <asm/uaccess.h>
+static inline int sctp_v6_addr_match_len(union sctp_addr *s1,
+ union sctp_addr *s2);
+static void sctp_v6_to_addr(union sctp_addr *addr, struct in6_addr *saddr,
+ __be16 port);
+static int sctp_v6_cmp_addr(const union sctp_addr *addr1,
+ const union sctp_addr *addr2);
+
/* Event handler for inet6 address addition/deletion events.
* The sctp_local_addr_list needs to be protocted by a spin lock since
* multiple notifiers (say IPv4 and IPv6) may be running at the same
@@ -123,7 +130,7 @@
}
spin_unlock_bh(&sctp_local_addr_lock);
if (found)
- call_rcu(&addr->rcu, sctp_local_addr_free);
+ kfree_rcu(addr, rcu);
break;
}
@@ -240,37 +247,107 @@
/* Returns the dst cache entry for the given source and destination ip
* addresses.
*/
-static struct dst_entry *sctp_v6_get_dst(struct sctp_association *asoc,
- union sctp_addr *daddr,
- union sctp_addr *saddr)
+static void sctp_v6_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
+ struct flowi *fl, struct sock *sk)
{
- struct dst_entry *dst;
- struct flowi6 fl6;
+ struct sctp_association *asoc = t->asoc;
+ struct dst_entry *dst = NULL;
+ struct flowi6 *fl6 = &fl->u.ip6;
+ struct sctp_bind_addr *bp;
+ struct sctp_sockaddr_entry *laddr;
+ union sctp_addr *baddr = NULL;
+ union sctp_addr *daddr = &t->ipaddr;
+ union sctp_addr dst_saddr;
+ __u8 matchlen = 0;
+ __u8 bmatchlen;
+ sctp_scope_t scope;
- memset(&fl6, 0, sizeof(fl6));
- ipv6_addr_copy(&fl6.daddr, &daddr->v6.sin6_addr);
+ memset(fl6, 0, sizeof(struct flowi6));
+ ipv6_addr_copy(&fl6->daddr, &daddr->v6.sin6_addr);
+ fl6->fl6_dport = daddr->v6.sin6_port;
+ fl6->flowi6_proto = IPPROTO_SCTP;
if (ipv6_addr_type(&daddr->v6.sin6_addr) & IPV6_ADDR_LINKLOCAL)
- fl6.flowi6_oif = daddr->v6.sin6_scope_id;
+ fl6->flowi6_oif = daddr->v6.sin6_scope_id;
+ SCTP_DEBUG_PRINTK("%s: DST=%pI6 ", __func__, &fl6->daddr);
- SCTP_DEBUG_PRINTK("%s: DST=%pI6 ", __func__, &fl6.daddr);
+ if (asoc)
+ fl6->fl6_sport = htons(asoc->base.bind_addr.port);
if (saddr) {
- ipv6_addr_copy(&fl6.saddr, &saddr->v6.sin6_addr);
- SCTP_DEBUG_PRINTK("SRC=%pI6 - ", &fl6.saddr);
+ ipv6_addr_copy(&fl6->saddr, &saddr->v6.sin6_addr);
+ fl6->fl6_sport = saddr->v6.sin6_port;
+ SCTP_DEBUG_PRINTK("SRC=%pI6 - ", &fl6->saddr);
}
- dst = ip6_route_output(&init_net, NULL, &fl6);
- if (!dst->error) {
+ dst = ip6_dst_lookup_flow(sk, fl6, NULL, false);
+ if (!asoc || saddr)
+ goto out;
+
+ bp = &asoc->base.bind_addr;
+ scope = sctp_scope(daddr);
+ /* ip6_dst_lookup has filled in the fl6->saddr for us. Check
+ * to see if we can use it.
+ */
+ if (!IS_ERR(dst)) {
+ /* Walk through the bind address list and look for a bind
+ * address that matches the source address of the returned dst.
+ */
+ sctp_v6_to_addr(&dst_saddr, &fl6->saddr, htons(bp->port));
+ rcu_read_lock();
+ list_for_each_entry_rcu(laddr, &bp->address_list, list) {
+ if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
+ continue;
+
+ /* Do not compare against v4 addrs */
+ if ((laddr->a.sa.sa_family == AF_INET6) &&
+ (sctp_v6_cmp_addr(&dst_saddr, &laddr->a))) {
+ rcu_read_unlock();
+ goto out;
+ }
+ }
+ rcu_read_unlock();
+ /* None of the bound addresses match the source address of the
+ * dst. So release it.
+ */
+ dst_release(dst);
+ dst = NULL;
+ }
+
+ /* Walk through the bind address list and try to get the
+ * best source address for a given destination.
+ */
+ rcu_read_lock();
+ list_for_each_entry_rcu(laddr, &bp->address_list, list) {
+ if (!laddr->valid && laddr->state != SCTP_ADDR_SRC)
+ continue;
+ if ((laddr->a.sa.sa_family == AF_INET6) &&
+ (scope <= sctp_scope(&laddr->a))) {
+ bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+ if (!baddr || (matchlen < bmatchlen)) {
+ baddr = &laddr->a;
+ matchlen = bmatchlen;
+ }
+ }
+ }
+ rcu_read_unlock();
+ if (baddr) {
+ ipv6_addr_copy(&fl6->saddr, &baddr->v6.sin6_addr);
+ fl6->fl6_sport = baddr->v6.sin6_port;
+ dst = ip6_dst_lookup_flow(sk, fl6, NULL, false);
+ }
+
+out:
+ if (!IS_ERR(dst)) {
struct rt6_info *rt;
rt = (struct rt6_info *)dst;
+ t->dst = dst;
SCTP_DEBUG_PRINTK("rt6_dst:%pI6 rt6_src:%pI6\n",
- &rt->rt6i_dst.addr, &rt->rt6i_src.addr);
- return dst;
+ &rt->rt6i_dst.addr, &fl6->saddr);
+ } else {
+ t->dst = NULL;
+ SCTP_DEBUG_PRINTK("NO ROUTE\n");
}
- SCTP_DEBUG_PRINTK("NO ROUTE\n");
- dst_release(dst);
- return NULL;
}
/* Returns the number of consecutive initial bits that match in the 2 ipv6
@@ -286,64 +363,18 @@
* and asoc's bind address list.
*/
static void sctp_v6_get_saddr(struct sctp_sock *sk,
- struct sctp_association *asoc,
- struct dst_entry *dst,
- union sctp_addr *daddr,
- union sctp_addr *saddr)
+ struct sctp_transport *t,
+ struct flowi *fl)
{
- struct sctp_bind_addr *bp;
- struct sctp_sockaddr_entry *laddr;
- sctp_scope_t scope;
- union sctp_addr *baddr = NULL;
- __u8 matchlen = 0;
- __u8 bmatchlen;
+ struct flowi6 *fl6 = &fl->u.ip6;
+ union sctp_addr *saddr = &t->saddr;
- SCTP_DEBUG_PRINTK("%s: asoc:%p dst:%p daddr:%pI6 ",
- __func__, asoc, dst, &daddr->v6.sin6_addr);
+ SCTP_DEBUG_PRINTK("%s: asoc:%p dst:%p\n", __func__, t->asoc, t->dst);
- if (!asoc) {
- ipv6_dev_get_saddr(sock_net(sctp_opt2sk(sk)),
- dst ? ip6_dst_idev(dst)->dev : NULL,
- &daddr->v6.sin6_addr,
- inet6_sk(&sk->inet.sk)->srcprefs,
- &saddr->v6.sin6_addr);
- SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: %pI6\n",
- &saddr->v6.sin6_addr);
- return;
+ if (t->dst) {
+ saddr->v6.sin6_family = AF_INET6;
+ ipv6_addr_copy(&saddr->v6.sin6_addr, &fl6->saddr);
}
-
- scope = sctp_scope(daddr);
-
- bp = &asoc->base.bind_addr;
-
- /* Go through the bind address list and find the best source address
- * that matches the scope of the destination address.
- */
- rcu_read_lock();
- list_for_each_entry_rcu(laddr, &bp->address_list, list) {
- if (!laddr->valid)
- continue;
- if ((laddr->state == SCTP_ADDR_SRC) &&
- (laddr->a.sa.sa_family == AF_INET6) &&
- (scope <= sctp_scope(&laddr->a))) {
- bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
- if (!baddr || (matchlen < bmatchlen)) {
- baddr = &laddr->a;
- matchlen = bmatchlen;
- }
- }
- }
-
- if (baddr) {
- memcpy(saddr, baddr, sizeof(union sctp_addr));
- SCTP_DEBUG_PRINTK("saddr: %pI6\n", &saddr->v6.sin6_addr);
- } else {
- pr_err("%s: asoc:%p Could not find a valid source "
- "address for the dest:%pI6\n",
- __func__, asoc, &daddr->v6.sin6_addr);
- }
-
- rcu_read_unlock();
}
/* Make a copy of all potential local addresses. */
@@ -465,14 +496,13 @@
return length;
}
-/* Initialize a sctp_addr from a dst_entry. */
-static void sctp_v6_dst_saddr(union sctp_addr *addr, struct dst_entry *dst,
+/* Initialize a sctp_addr from struct in6_addr. */
+static void sctp_v6_to_addr(union sctp_addr *addr, struct in6_addr *saddr,
__be16 port)
{
- struct rt6_info *rt = (struct rt6_info *)dst;
addr->sa.sa_family = AF_INET6;
addr->v6.sin6_port = port;
- ipv6_addr_copy(&addr->v6.sin6_addr, &rt->rt6i_src.addr);
+ ipv6_addr_copy(&addr->v6.sin6_addr, saddr);
}
/* Compare addresses exactly.
@@ -531,7 +561,7 @@
static int sctp_v6_available(union sctp_addr *addr, struct sctp_sock *sp)
{
int type;
- struct in6_addr *in6 = (struct in6_addr *)&addr->v6.sin6_addr;
+ const struct in6_addr *in6 = (const struct in6_addr *)&addr->v6.sin6_addr;
type = ipv6_addr_type(in6);
if (IPV6_ADDR_ANY == type)
@@ -959,7 +989,6 @@
.to_sk_daddr = sctp_v6_to_sk_daddr,
.from_addr_param = sctp_v6_from_addr_param,
.to_addr_param = sctp_v6_to_addr_param,
- .dst_saddr = sctp_v6_dst_saddr,
.cmp_addr = sctp_v6_cmp_addr,
.scope = sctp_v6_scope,
.addr_valid = sctp_v6_addr_valid,
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index bf92a5b..1c88c89 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -131,7 +131,8 @@
static inline int sctp_cacc_skip_3_1_f(struct sctp_transport *transport,
int count_of_newacks)
{
- if (count_of_newacks < 2 && !transport->cacc.cacc_saw_newack)
+ if (count_of_newacks < 2 &&
+ (transport && !transport->cacc.cacc_saw_newack))
return 1;
return 0;
}
@@ -319,7 +320,6 @@
* chunk.
*/
switch (q->asoc->state) {
- case SCTP_STATE_EMPTY:
case SCTP_STATE_CLOSED:
case SCTP_STATE_SHUTDOWN_PENDING:
case SCTP_STATE_SHUTDOWN_SENT:
@@ -577,6 +577,13 @@
* try to send as much as possible.
*/
list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) {
+ /* If the chunk is abandoned, move it to abandoned list. */
+ if (sctp_chunk_abandoned(chunk)) {
+ list_del_init(&chunk->transmitted_list);
+ sctp_insert_list(&q->abandoned,
+ &chunk->transmitted_list);
+ continue;
+ }
/* Make sure that Gap Acked TSNs are not retransmitted. A
* simple approach is just to move such TSNs out of the
@@ -618,9 +625,12 @@
/* If we are retransmitting, we should only
* send a single packet.
+ * Otherwise, try appending this chunk again.
*/
if (rtx_timeout || fast_rtx)
done = 1;
+ else
+ goto redo;
/* Bundle next chunk in the next round. */
break;
@@ -1683,8 +1693,9 @@
/* SFR-CACC may require us to skip marking
* this chunk as missing.
*/
- if (!transport || !sctp_cacc_skip(primary, transport,
- count_of_newacks, tsn)) {
+ if (!transport || !sctp_cacc_skip(primary,
+ chunk->transport,
+ count_of_newacks, tsn)) {
chunk->tsn_missing_report++;
SCTP_DEBUG_PRINTK(
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index d5bf91d..67380a2 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -230,13 +230,6 @@
}
}
-void sctp_local_addr_free(struct rcu_head *head)
-{
- struct sctp_sockaddr_entry *e = container_of(head,
- struct sctp_sockaddr_entry, rcu);
- kfree(e);
-}
-
/* Copy the local addresses which are valid for 'scope' into 'bp'. */
int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope,
gfp_t gfp, int copy_flags)
@@ -339,13 +332,12 @@
}
/* Initialize a sctp_addr from a dst_entry. */
-static void sctp_v4_dst_saddr(union sctp_addr *saddr, struct dst_entry *dst,
+static void sctp_v4_dst_saddr(union sctp_addr *saddr, struct flowi4 *fl4,
__be16 port)
{
- struct rtable *rt = (struct rtable *)dst;
saddr->v4.sin_family = AF_INET;
saddr->v4.sin_port = port;
- saddr->v4.sin_addr.s_addr = rt->rt_src;
+ saddr->v4.sin_addr.s_addr = fl4->saddr;
}
/* Compare two addresses exactly. */
@@ -463,35 +455,36 @@
* addresses. If an association is passed, trys to get a dst entry with a
* source address that matches an address in the bind address list.
*/
-static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc,
- union sctp_addr *daddr,
- union sctp_addr *saddr)
+static void sctp_v4_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
+ struct flowi *fl, struct sock *sk)
{
+ struct sctp_association *asoc = t->asoc;
struct rtable *rt;
- struct flowi4 fl4;
+ struct flowi4 *fl4 = &fl->u.ip4;
struct sctp_bind_addr *bp;
struct sctp_sockaddr_entry *laddr;
struct dst_entry *dst = NULL;
+ union sctp_addr *daddr = &t->ipaddr;
union sctp_addr dst_saddr;
- memset(&fl4, 0x0, sizeof(struct flowi4));
- fl4.daddr = daddr->v4.sin_addr.s_addr;
- fl4.fl4_dport = daddr->v4.sin_port;
- fl4.flowi4_proto = IPPROTO_SCTP;
+ memset(fl4, 0x0, sizeof(struct flowi4));
+ fl4->daddr = daddr->v4.sin_addr.s_addr;
+ fl4->fl4_dport = daddr->v4.sin_port;
+ fl4->flowi4_proto = IPPROTO_SCTP;
if (asoc) {
- fl4.flowi4_tos = RT_CONN_FLAGS(asoc->base.sk);
- fl4.flowi4_oif = asoc->base.sk->sk_bound_dev_if;
- fl4.fl4_sport = htons(asoc->base.bind_addr.port);
+ fl4->flowi4_tos = RT_CONN_FLAGS(asoc->base.sk);
+ fl4->flowi4_oif = asoc->base.sk->sk_bound_dev_if;
+ fl4->fl4_sport = htons(asoc->base.bind_addr.port);
}
if (saddr) {
- fl4.saddr = saddr->v4.sin_addr.s_addr;
- fl4.fl4_sport = saddr->v4.sin_port;
+ fl4->saddr = saddr->v4.sin_addr.s_addr;
+ fl4->fl4_sport = saddr->v4.sin_port;
}
SCTP_DEBUG_PRINTK("%s: DST:%pI4, SRC:%pI4 - ",
- __func__, &fl4.daddr, &fl4.saddr);
+ __func__, &fl4->daddr, &fl4->saddr);
- rt = ip_route_output_key(&init_net, &fl4);
+ rt = ip_route_output_key(&init_net, fl4);
if (!IS_ERR(rt))
dst = &rt->dst;
@@ -507,7 +500,7 @@
/* Walk through the bind address list and look for a bind
* address that matches the source address of the returned dst.
*/
- sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
+ sctp_v4_dst_saddr(&dst_saddr, fl4, htons(bp->port));
rcu_read_lock();
list_for_each_entry_rcu(laddr, &bp->address_list, list) {
if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
@@ -533,9 +526,9 @@
continue;
if ((laddr->state == SCTP_ADDR_SRC) &&
(AF_INET == laddr->a.sa.sa_family)) {
- fl4.saddr = laddr->a.v4.sin_addr.s_addr;
- fl4.fl4_sport = laddr->a.v4.sin_port;
- rt = ip_route_output_key(&init_net, &fl4);
+ fl4->saddr = laddr->a.v4.sin_addr.s_addr;
+ fl4->fl4_sport = laddr->a.v4.sin_port;
+ rt = ip_route_output_key(&init_net, fl4);
if (!IS_ERR(rt)) {
dst = &rt->dst;
goto out_unlock;
@@ -546,33 +539,27 @@
out_unlock:
rcu_read_unlock();
out:
+ t->dst = dst;
if (dst)
SCTP_DEBUG_PRINTK("rt_dst:%pI4, rt_src:%pI4\n",
- &rt->rt_dst, &rt->rt_src);
+ &fl4->daddr, &fl4->saddr);
else
SCTP_DEBUG_PRINTK("NO ROUTE\n");
-
- return dst;
}
/* For v4, the source address is cached in the route entry(dst). So no need
* to cache it separately and hence this is an empty routine.
*/
static void sctp_v4_get_saddr(struct sctp_sock *sk,
- struct sctp_association *asoc,
- struct dst_entry *dst,
- union sctp_addr *daddr,
- union sctp_addr *saddr)
+ struct sctp_transport *t,
+ struct flowi *fl)
{
- struct rtable *rt = (struct rtable *)dst;
-
- if (!asoc)
- return;
+ union sctp_addr *saddr = &t->saddr;
+ struct rtable *rt = (struct rtable *)t->dst;
if (rt) {
saddr->v4.sin_family = AF_INET;
- saddr->v4.sin_port = htons(asoc->base.bind_addr.port);
- saddr->v4.sin_addr.s_addr = rt->rt_src;
+ saddr->v4.sin_addr.s_addr = fl->u.ip4.saddr;
}
}
@@ -681,7 +668,7 @@
}
spin_unlock_bh(&sctp_local_addr_lock);
if (found)
- call_rcu(&addr->rcu, sctp_local_addr_free);
+ kfree_rcu(addr, rcu);
break;
}
@@ -854,14 +841,14 @@
SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, src:%pI4, dst:%pI4\n",
__func__, skb, skb->len,
- &skb_rtable(skb)->rt_src,
- &skb_rtable(skb)->rt_dst);
+ &transport->fl.u.ip4.saddr,
+ &transport->fl.u.ip4.daddr);
inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
- return ip_queue_xmit(skb);
+ return ip_queue_xmit(skb, &transport->fl);
}
static struct sctp_af sctp_af_inet;
@@ -950,7 +937,6 @@
.to_sk_daddr = sctp_v4_to_sk_daddr,
.from_addr_param = sctp_v4_from_addr_param,
.to_addr_param = sctp_v4_to_addr_param,
- .dst_saddr = sctp_v4_dst_saddr,
.cmp_addr = sctp_v4_cmp_addr,
.addr_valid = sctp_v4_addr_valid,
.inaddr_any = sctp_v4_inaddr_any,
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index b3434cc..58eb27f 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1075,20 +1075,28 @@
/* Make a HEARTBEAT chunk. */
struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *asoc,
- const struct sctp_transport *transport,
- const void *payload, const size_t paylen)
+ const struct sctp_transport *transport)
{
- struct sctp_chunk *retval = sctp_make_chunk(asoc, SCTP_CID_HEARTBEAT,
- 0, paylen);
+ struct sctp_chunk *retval;
+ sctp_sender_hb_info_t hbinfo;
+
+ retval = sctp_make_chunk(asoc, SCTP_CID_HEARTBEAT, 0, sizeof(hbinfo));
if (!retval)
goto nodata;
+ hbinfo.param_hdr.type = SCTP_PARAM_HEARTBEAT_INFO;
+ hbinfo.param_hdr.length = htons(sizeof(sctp_sender_hb_info_t));
+ hbinfo.daddr = transport->ipaddr;
+ hbinfo.sent_at = jiffies;
+ hbinfo.hb_nonce = transport->hb_nonce;
+
/* Cast away the 'const', as this is just telling the chunk
* what transport it belongs to.
*/
retval->transport = (struct sctp_transport *) transport;
- retval->subh.hbs_hdr = sctp_addto_chunk(retval, paylen, payload);
+ retval->subh.hbs_hdr = sctp_addto_chunk(retval, sizeof(hbinfo),
+ &hbinfo);
nodata:
return retval;
@@ -2242,14 +2250,17 @@
* Returns 0 on failure, else success.
* FIXME: This is an association method.
*/
-int sctp_process_init(struct sctp_association *asoc, sctp_cid_t cid,
+int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,
const union sctp_addr *peer_addr,
sctp_init_chunk_t *peer_init, gfp_t gfp)
{
union sctp_params param;
struct sctp_transport *transport;
struct list_head *pos, *temp;
+ struct sctp_af *af;
+ union sctp_addr addr;
char *cookie;
+ int src_match = 0;
/* We must include the address that the INIT packet came from.
* This is the only address that matters for an INIT packet.
@@ -2261,18 +2272,31 @@
* added as the primary transport. The source address seems to
* be a a better choice than any of the embedded addresses.
*/
- if (peer_addr) {
- if(!sctp_assoc_add_peer(asoc, peer_addr, gfp, SCTP_ACTIVE))
- goto nomem;
- }
+ if(!sctp_assoc_add_peer(asoc, peer_addr, gfp, SCTP_ACTIVE))
+ goto nomem;
+
+ if (sctp_cmp_addr_exact(sctp_source(chunk), peer_addr))
+ src_match = 1;
/* Process the initialization parameters. */
sctp_walk_params(param, peer_init, init_hdr.params) {
+ if (!src_match && (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
+ param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
+ af = sctp_get_af_specific(param_type2af(param.p->type));
+ af->from_addr_param(&addr, param.addr,
+ chunk->sctp_hdr->source, 0);
+ if (sctp_cmp_addr_exact(sctp_source(chunk), &addr))
+ src_match = 1;
+ }
if (!sctp_process_param(asoc, param, peer_addr, gfp))
goto clean_up;
}
+ /* source address of chunk may not match any valid address */
+ if (!src_match)
+ goto clean_up;
+
/* AUTH: After processing the parameters, make sure that we
* have all the required info to potentially do authentications.
*/
@@ -2923,7 +2947,7 @@
asconf_param->param_hdr.type != SCTP_PARAM_SET_PRIMARY)
return SCTP_ERROR_UNKNOWN_PARAM;
- switch (addr_param->v4.param_hdr.type) {
+ switch (addr_param->p.type) {
case SCTP_PARAM_IPV6_ADDRESS:
if (!asoc->peer.ipv6_address)
return SCTP_ERROR_DNS_FAILED;
@@ -2936,7 +2960,7 @@
return SCTP_ERROR_DNS_FAILED;
}
- af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
+ af = sctp_get_af_specific(param_type2af(addr_param->p.type));
if (unlikely(!af))
return SCTP_ERROR_DNS_FAILED;
@@ -3100,7 +3124,7 @@
/* Skip the address parameter and store a pointer to the first
* asconf parameter.
*/
- length = ntohs(addr_param->v4.param_hdr.length);
+ length = ntohs(addr_param->p.length);
asconf_param = (sctp_addip_param_t *)((void *)addr_param + length);
chunk_len -= length;
@@ -3177,7 +3201,7 @@
((void *)asconf_param + sizeof(sctp_addip_param_t));
/* We have checked the packet before, so we do not check again. */
- af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
+ af = sctp_get_af_specific(param_type2af(addr_param->p.type));
af->from_addr_param(&addr, addr_param, htons(bp->port), 0);
switch (asconf_param->param_hdr.type) {
@@ -3193,11 +3217,8 @@
local_bh_enable();
list_for_each_entry(transport, &asoc->peer.transport_addr_list,
transports) {
- if (transport->state == SCTP_ACTIVE)
- continue;
dst_release(transport->dst);
- sctp_transport_route(transport, NULL,
- sctp_sk(asoc->base.sk));
+ transport->dst = NULL;
}
break;
case SCTP_PARAM_DEL_IP:
@@ -3207,8 +3228,7 @@
list_for_each_entry(transport, &asoc->peer.transport_addr_list,
transports) {
dst_release(transport->dst);
- sctp_transport_route(transport, NULL,
- sctp_sk(asoc->base.sk));
+ transport->dst = NULL;
}
break;
default:
@@ -3304,7 +3324,7 @@
/* Skip the address parameter in the last asconf sent and store a
* pointer to the first asconf parameter.
*/
- length = ntohs(addr_param->v4.param_hdr.length);
+ length = ntohs(addr_param->p.length);
asconf_param = (sctp_addip_param_t *)((void *)addr_param + length);
asconf_len -= length;
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 5f86ee4b..d612ca1 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -595,8 +595,7 @@
* fail during INIT processing (due to malloc problems),
* just return the error and stop processing the stack.
*/
- if (!sctp_process_init(asoc, chunk->chunk_hdr->type,
- sctp_source(chunk), peer_init, gfp))
+ if (!sctp_process_init(asoc, chunk, sctp_source(chunk), peer_init, gfp))
error = -ENOMEM;
else
error = 0;
@@ -1415,12 +1414,6 @@
SCTP_RTXR_T3_RTX);
break;
- case SCTP_CMD_TRANSMIT:
- /* Kick start transmission. */
- error = sctp_outq_uncork(&asoc->outqueue);
- local_cork = 0;
- break;
-
case SCTP_CMD_ECN_CE:
/* Do delayed CE processing. */
sctp_do_ecn_ce_work(asoc, cmd->obj.u32);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 7679208..7f4a4f8 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -393,8 +393,7 @@
goto nomem_init;
/* The call, sctp_process_init(), can fail on memory allocation. */
- if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
- sctp_source(chunk),
+ if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk),
(sctp_init_chunk_t *)chunk->chunk_hdr,
GFP_ATOMIC))
goto nomem_init;
@@ -725,7 +724,7 @@
*/
peer_init = &chunk->subh.cookie_hdr->c.peer_init[0];
- if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
+ if (!sctp_process_init(new_asoc, chunk,
&chunk->subh.cookie_hdr->c.peer_addr,
peer_init, GFP_ATOMIC))
goto nomem_init;
@@ -942,18 +941,9 @@
{
struct sctp_transport *transport = (struct sctp_transport *) arg;
struct sctp_chunk *reply;
- sctp_sender_hb_info_t hbinfo;
- size_t paylen = 0;
-
- hbinfo.param_hdr.type = SCTP_PARAM_HEARTBEAT_INFO;
- hbinfo.param_hdr.length = htons(sizeof(sctp_sender_hb_info_t));
- hbinfo.daddr = transport->ipaddr;
- hbinfo.sent_at = jiffies;
- hbinfo.hb_nonce = transport->hb_nonce;
/* Send a heartbeat to our peer. */
- paylen = sizeof(sctp_sender_hb_info_t);
- reply = sctp_make_heartbeat(asoc, transport, &hbinfo, paylen);
+ reply = sctp_make_heartbeat(asoc, transport);
if (!reply)
return SCTP_DISPOSITION_NOMEM;
@@ -1464,8 +1454,7 @@
* Verification Tag and Peers Verification tag into a reserved
* place (local tie-tag and per tie-tag) within the state cookie.
*/
- if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
- sctp_source(chunk),
+ if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk),
(sctp_init_chunk_t *)chunk->chunk_hdr,
GFP_ATOMIC))
goto nomem;
@@ -1694,8 +1683,7 @@
*/
peer_init = &chunk->subh.cookie_hdr->c.peer_init[0];
- if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
- sctp_source(chunk), peer_init,
+ if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk), peer_init,
GFP_ATOMIC))
goto nomem;
@@ -1780,8 +1768,7 @@
* side effects--it is safe to run them here.
*/
peer_init = &chunk->subh.cookie_hdr->c.peer_init[0];
- if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
- sctp_source(chunk), peer_init,
+ if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk), peer_init,
GFP_ATOMIC))
goto nomem;
@@ -2412,8 +2399,15 @@
/* See if we have an error cause code in the chunk. */
len = ntohs(chunk->chunk_hdr->length);
- if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
+ if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr)) {
+
+ sctp_errhdr_t *err;
+ sctp_walk_errors(err, chunk->chunk_hdr);
+ if ((void *)err != (void *)chunk->chunk_end)
+ return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
+
error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
+ }
sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNRESET));
/* ASSOC_FAILED will DELETE_TCB. */
@@ -3204,6 +3198,7 @@
sctp_cmd_seq_t *commands)
{
struct sctp_chunk *chunk = arg;
+ sctp_errhdr_t *err;
if (!sctp_vtag_verify(chunk, asoc))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -3212,6 +3207,10 @@
if (!sctp_chunk_length_valid(chunk, sizeof(sctp_operr_chunk_t)))
return sctp_sf_violation_chunklen(ep, asoc, type, arg,
commands);
+ sctp_walk_errors(err, chunk->chunk_hdr);
+ if ((void *)err != (void *)chunk->chunk_end)
+ return sctp_sf_violation_paramlen(ep, asoc, type, arg,
+ (void *)err, commands);
sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
SCTP_CHUNK(chunk));
@@ -3320,8 +3319,10 @@
struct sctp_chunk *chunk = arg;
struct sk_buff *skb = chunk->skb;
sctp_chunkhdr_t *ch;
+ sctp_errhdr_t *err;
__u8 *ch_end;
int ootb_shut_ack = 0;
+ int ootb_cookie_ack = 0;
SCTP_INC_STATS(SCTP_MIB_OUTOFBLUES);
@@ -3346,6 +3347,23 @@
if (SCTP_CID_ABORT == ch->type)
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
+ /* RFC 8.4, 7) If the packet contains a "Stale cookie" ERROR
+ * or a COOKIE ACK the SCTP Packet should be silently
+ * discarded.
+ */
+
+ if (SCTP_CID_COOKIE_ACK == ch->type)
+ ootb_cookie_ack = 1;
+
+ if (SCTP_CID_ERROR == ch->type) {
+ sctp_walk_errors(err, ch) {
+ if (SCTP_ERROR_STALE_COOKIE == err->cause) {
+ ootb_cookie_ack = 1;
+ break;
+ }
+ }
+ }
+
/* Report violation if chunk len overflows */
ch_end = ((__u8 *)ch) + WORD_ROUND(ntohs(ch->length));
if (ch_end > skb_tail_pointer(skb))
@@ -3357,6 +3375,8 @@
if (ootb_shut_ack)
return sctp_sf_shut_8_4_5(ep, asoc, type, arg, commands);
+ else if (ootb_cookie_ack)
+ return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
else
return sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands);
}
@@ -4343,8 +4363,9 @@
/*
* Handle a protocol violation when the parameter length is invalid.
- * "Invalid" length is identified as smaller than the minimal length a
- * given parameter can be.
+ * If the length is smaller than the minimum length of a given parameter,
+ * or accumulated length in multi parameters exceeds the end of the chunk,
+ * the length is considered as invalid.
*/
static sctp_disposition_t sctp_sf_violation_paramlen(
const struct sctp_endpoint *ep,
@@ -5056,6 +5077,30 @@
***************************************************************************/
/*
+ * When the SCTP stack has no more user data to send or retransmit, this
+ * notification is given to the user. Also, at the time when a user app
+ * subscribes to this event, if there is no data to be sent or
+ * retransmit, the stack will immediately send up this notification.
+ */
+sctp_disposition_t sctp_sf_do_no_pending_tsn(
+ const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ const sctp_subtype_t type,
+ void *arg,
+ sctp_cmd_seq_t *commands)
+{
+ struct sctp_ulpevent *event;
+
+ event = sctp_ulpevent_make_sender_dry_event(asoc, GFP_ATOMIC);
+ if (!event)
+ return SCTP_DISPOSITION_NOMEM;
+
+ sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(event));
+
+ return SCTP_DISPOSITION_CONSUME;
+}
+
+/*
* Start the shutdown negotiation.
*
* From Section 9.2:
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index 546d4387..0338dc6 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -107,8 +107,6 @@
#define TYPE_SCTP_FUNC(func) {.fn = func, .name = #func}
#define TYPE_SCTP_DATA { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -128,8 +126,6 @@
} /* TYPE_SCTP_DATA */
#define TYPE_SCTP_INIT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_do_5_1B_init), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -149,8 +145,6 @@
} /* TYPE_SCTP_INIT */
#define TYPE_SCTP_INIT_ACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_do_5_2_3_initack), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -170,8 +164,6 @@
} /* TYPE_SCTP_INIT_ACK */
#define TYPE_SCTP_SACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -191,8 +183,6 @@
} /* TYPE_SCTP_SACK */
#define TYPE_SCTP_HEARTBEAT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -213,8 +203,6 @@
} /* TYPE_SCTP_HEARTBEAT */
#define TYPE_SCTP_HEARTBEAT_ACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -234,8 +222,6 @@
} /* TYPE_SCTP_HEARTBEAT_ACK */
#define TYPE_SCTP_ABORT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_pdiscard), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -255,8 +241,6 @@
} /* TYPE_SCTP_ABORT */
#define TYPE_SCTP_SHUTDOWN { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -276,8 +260,6 @@
} /* TYPE_SCTP_SHUTDOWN */
#define TYPE_SCTP_SHUTDOWN_ACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -297,8 +279,6 @@
} /* TYPE_SCTP_SHUTDOWN_ACK */
#define TYPE_SCTP_ERROR { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -318,8 +298,6 @@
} /* TYPE_SCTP_ERROR */
#define TYPE_SCTP_COOKIE_ECHO { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_do_5_1D_ce), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -339,8 +317,6 @@
} /* TYPE_SCTP_COOKIE_ECHO */
#define TYPE_SCTP_COOKIE_ACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -360,8 +336,6 @@
} /* TYPE_SCTP_COOKIE_ACK */
#define TYPE_SCTP_ECN_ECNE { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -381,8 +355,6 @@
} /* TYPE_SCTP_ECN_ECNE */
#define TYPE_SCTP_ECN_CWR { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -402,8 +374,6 @@
} /* TYPE_SCTP_ECN_CWR */
#define TYPE_SCTP_SHUTDOWN_COMPLETE { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -446,8 +416,6 @@
}; /* state_fn_t chunk_event_table[][] */
#define TYPE_SCTP_ASCONF { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -467,8 +435,6 @@
} /* TYPE_SCTP_ASCONF */
#define TYPE_SCTP_ASCONF_ACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -496,8 +462,6 @@
}; /*state_fn_t addip_chunk_event_table[][] */
#define TYPE_SCTP_FWD_TSN { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -524,8 +488,6 @@
}; /*state_fn_t prsctp_chunk_event_table[][] */
#define TYPE_SCTP_AUTH { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -553,8 +515,6 @@
static const sctp_sm_table_entry_t
chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
- /* SCTP_STATE_EMPTY */
- TYPE_SCTP_FUNC(sctp_sf_ootb),
/* SCTP_STATE_CLOSED */
TYPE_SCTP_FUNC(sctp_sf_ootb),
/* SCTP_STATE_COOKIE_WAIT */
@@ -575,8 +535,6 @@
#define TYPE_SCTP_PRIMITIVE_ASSOCIATE { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_do_prm_asoc), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -596,8 +554,6 @@
} /* TYPE_SCTP_PRIMITIVE_ASSOCIATE */
#define TYPE_SCTP_PRIMITIVE_SHUTDOWN { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_error_closed), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -617,8 +573,6 @@
} /* TYPE_SCTP_PRIMITIVE_SHUTDOWN */
#define TYPE_SCTP_PRIMITIVE_ABORT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_error_closed), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -638,8 +592,6 @@
} /* TYPE_SCTP_PRIMITIVE_ABORT */
#define TYPE_SCTP_PRIMITIVE_SEND { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_error_closed), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -659,8 +611,6 @@
} /* TYPE_SCTP_PRIMITIVE_SEND */
#define TYPE_SCTP_PRIMITIVE_REQUESTHEARTBEAT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_error_closed), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -680,8 +630,6 @@
} /* TYPE_SCTP_PRIMITIVE_REQUESTHEARTBEAT */
#define TYPE_SCTP_PRIMITIVE_ASCONF { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_error_closed), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -713,8 +661,6 @@
};
#define TYPE_SCTP_OTHER_NO_PENDING_TSN { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -722,7 +668,7 @@
/* SCTP_STATE_COOKIE_ECHOED */ \
TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
/* SCTP_STATE_ESTABLISHED */ \
- TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
+ TYPE_SCTP_FUNC(sctp_sf_do_no_pending_tsn), \
/* SCTP_STATE_SHUTDOWN_PENDING */ \
TYPE_SCTP_FUNC(sctp_sf_do_9_2_start_shutdown), \
/* SCTP_STATE_SHUTDOWN_SENT */ \
@@ -734,8 +680,6 @@
}
#define TYPE_SCTP_OTHER_ICMP_PROTO_UNREACH { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -760,8 +704,6 @@
};
#define TYPE_SCTP_EVENT_TIMEOUT_NONE { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -781,8 +723,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_T1_COOKIE { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -802,8 +742,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_T1_INIT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -823,8 +761,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_T2_SHUTDOWN { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -844,8 +780,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_T3_RTX { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -865,8 +799,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_T4_RTO { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -886,8 +818,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -907,8 +837,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_HEARTBEAT { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -928,8 +856,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_SACK { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_bug), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
@@ -949,8 +875,6 @@
}
#define TYPE_SCTP_EVENT_TIMEOUT_AUTOCLOSE { \
- /* SCTP_STATE_EMPTY */ \
- TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_COOKIE_WAIT */ \
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index deb82e3..6766913 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -658,11 +658,15 @@
goto err_bindx_rem;
}
- if (sa_addr->v4.sin_port != htons(bp->port)) {
+ if (sa_addr->v4.sin_port &&
+ sa_addr->v4.sin_port != htons(bp->port)) {
retval = -EINVAL;
goto err_bindx_rem;
}
+ if (!sa_addr->v4.sin_port)
+ sa_addr->v4.sin_port = htons(bp->port);
+
/* FIXME - There is probably a need to check if sk->sk_saddr and
* sk->sk_rcv_addr are currently set to one of the addresses to
* be removed. This is something which needs to be looked into
@@ -1492,7 +1496,7 @@
struct sctp_chunk *chunk;
union sctp_addr to;
struct sockaddr *msg_name = NULL;
- struct sctp_sndrcvinfo default_sinfo = { 0 };
+ struct sctp_sndrcvinfo default_sinfo;
struct sctp_sndrcvinfo *sinfo;
struct sctp_initmsg *sinit;
sctp_assoc_t associd = 0;
@@ -1756,6 +1760,7 @@
/* If the user didn't specify SNDRCVINFO, make up one with
* some defaults.
*/
+ memset(&default_sinfo, 0, sizeof(default_sinfo));
default_sinfo.sinfo_stream = asoc->default_stream;
default_sinfo.sinfo_flags = asoc->default_flags;
default_sinfo.sinfo_ppid = asoc->default_ppid;
@@ -1786,12 +1791,10 @@
goto out_free;
}
- if (sinfo) {
- /* Check for invalid stream. */
- if (sinfo->sinfo_stream >= asoc->c.sinit_num_ostreams) {
- err = -EINVAL;
- goto out_free;
- }
+ /* Check for invalid stream. */
+ if (sinfo->sinfo_stream >= asoc->c.sinit_num_ostreams) {
+ err = -EINVAL;
+ goto out_free;
}
timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
@@ -2283,7 +2286,7 @@
trans->param_flags =
(trans->param_flags & ~SPP_PMTUD) | pmtud_change;
if (update) {
- sctp_transport_pmtu(trans);
+ sctp_transport_pmtu(trans, sctp_opt2sk(sp));
sctp_assoc_sync_pmtu(asoc);
}
} else if (asoc) {
@@ -3215,14 +3218,9 @@
if (optlen < sizeof(struct sctp_hmacalgo))
return -EINVAL;
- hmacs = kmalloc(optlen, GFP_KERNEL);
- if (!hmacs)
- return -ENOMEM;
-
- if (copy_from_user(hmacs, optval, optlen)) {
- err = -EFAULT;
- goto out;
- }
+ hmacs= memdup_user(optval, optlen);
+ if (IS_ERR(hmacs))
+ return PTR_ERR(hmacs);
idents = hmacs->shmac_num_idents;
if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS ||
@@ -3257,14 +3255,9 @@
if (optlen <= sizeof(struct sctp_authkey))
return -EINVAL;
- authkey = kmalloc(optlen, GFP_KERNEL);
- if (!authkey)
- return -ENOMEM;
-
- if (copy_from_user(authkey, optval, optlen)) {
- ret = -EFAULT;
- goto out;
- }
+ authkey= memdup_user(optval, optlen);
+ if (IS_ERR(authkey))
+ return PTR_ERR(authkey);
if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) {
ret = -EINVAL;
@@ -5283,6 +5276,55 @@
return 0;
}
+/*
+ * 8.2.6. Get the Current Identifiers of Associations
+ * (SCTP_GET_ASSOC_ID_LIST)
+ *
+ * This option gets the current list of SCTP association identifiers of
+ * the SCTP associations handled by a one-to-many style socket.
+ */
+static int sctp_getsockopt_assoc_ids(struct sock *sk, int len,
+ char __user *optval, int __user *optlen)
+{
+ struct sctp_sock *sp = sctp_sk(sk);
+ struct sctp_association *asoc;
+ struct sctp_assoc_ids *ids;
+ u32 num = 0;
+
+ if (sctp_style(sk, TCP))
+ return -EOPNOTSUPP;
+
+ if (len < sizeof(struct sctp_assoc_ids))
+ return -EINVAL;
+
+ list_for_each_entry(asoc, &(sp->ep->asocs), asocs) {
+ num++;
+ }
+
+ if (len < sizeof(struct sctp_assoc_ids) + sizeof(sctp_assoc_t) * num)
+ return -EINVAL;
+
+ len = sizeof(struct sctp_assoc_ids) + sizeof(sctp_assoc_t) * num;
+
+ ids = kmalloc(len, GFP_KERNEL);
+ if (unlikely(!ids))
+ return -ENOMEM;
+
+ ids->gaids_number_of_ids = num;
+ num = 0;
+ list_for_each_entry(asoc, &(sp->ep->asocs), asocs) {
+ ids->gaids_assoc_id[num++] = asoc->assoc_id;
+ }
+
+ if (put_user(len, optlen) || copy_to_user(optval, ids, len)) {
+ kfree(ids);
+ return -EFAULT;
+ }
+
+ kfree(ids);
+ return 0;
+}
+
SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
@@ -5415,6 +5457,9 @@
case SCTP_GET_ASSOC_NUMBER:
retval = sctp_getsockopt_assoc_number(sk, len, optval, optlen);
break;
+ case SCTP_GET_ASSOC_ID_LIST:
+ retval = sctp_getsockopt_assoc_ids(sk, len, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index d3ae493..394c57c 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -211,15 +211,17 @@
}
/* Initialize the pmtu of a transport. */
-void sctp_transport_pmtu(struct sctp_transport *transport)
+void sctp_transport_pmtu(struct sctp_transport *transport, struct sock *sk)
{
- struct dst_entry *dst;
+ /* If we don't have a fresh route, look one up */
+ if (!transport->dst || transport->dst->obsolete > 1) {
+ dst_release(transport->dst);
+ transport->af_specific->get_dst(transport, &transport->saddr,
+ &transport->fl, sk);
+ }
- dst = transport->af_specific->get_dst(NULL, &transport->ipaddr, NULL);
-
- if (dst) {
- transport->pathmtu = dst_mtu(dst);
- dst_release(dst);
+ if (transport->dst) {
+ transport->pathmtu = dst_mtu(transport->dst);
} else
transport->pathmtu = SCTP_DEFAULT_MAXSEGMENT;
}
@@ -270,22 +272,19 @@
{
struct sctp_association *asoc = transport->asoc;
struct sctp_af *af = transport->af_specific;
- union sctp_addr *daddr = &transport->ipaddr;
- struct dst_entry *dst;
- dst = af->get_dst(asoc, daddr, saddr);
+ af->get_dst(transport, saddr, &transport->fl, sctp_opt2sk(opt));
if (saddr)
memcpy(&transport->saddr, saddr, sizeof(union sctp_addr));
else
- af->get_saddr(opt, asoc, dst, daddr, &transport->saddr);
+ af->get_saddr(opt, transport, &transport->fl);
- transport->dst = dst;
if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) {
return;
}
- if (dst) {
- transport->pathmtu = dst_mtu(dst);
+ if (transport->dst) {
+ transport->pathmtu = dst_mtu(transport->dst);
/* Initialize sk->sk_rcv_saddr, if the transport is the
* association's active path for getsockname().
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 61b1f5a..e70e5fc 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -843,7 +843,7 @@
ak = (struct sctp_authkey_event *)
skb_put(skb, sizeof(struct sctp_authkey_event));
- ak->auth_type = SCTP_AUTHENTICATION_INDICATION;
+ ak->auth_type = SCTP_AUTHENTICATION_EVENT;
ak->auth_flags = 0;
ak->auth_length = sizeof(struct sctp_authkey_event);
@@ -862,6 +862,34 @@
return NULL;
}
+/*
+ * Socket Extensions for SCTP
+ * 6.3.10. SCTP_SENDER_DRY_EVENT
+ */
+struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
+ const struct sctp_association *asoc, gfp_t gfp)
+{
+ struct sctp_ulpevent *event;
+ struct sctp_sender_dry_event *sdry;
+ struct sk_buff *skb;
+
+ event = sctp_ulpevent_new(sizeof(struct sctp_sender_dry_event),
+ MSG_NOTIFICATION, gfp);
+ if (!event)
+ return NULL;
+
+ skb = sctp_event2skb(event);
+ sdry = (struct sctp_sender_dry_event *)
+ skb_put(skb, sizeof(struct sctp_sender_dry_event));
+
+ sdry->sender_dry_type = SCTP_SENDER_DRY_EVENT;
+ sdry->sender_dry_flags = 0;
+ sdry->sender_dry_length = sizeof(struct sctp_sender_dry_event);
+ sctp_ulpevent_set_owner(event, asoc);
+ sdry->sender_dry_assoc_id = sctp_assoc2id(asoc);
+
+ return event;
+}
/* Return the notification type, assuming this is a notification
* event.
diff --git a/net/socket.c b/net/socket.c
index 310d16b..02dc82d 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -263,15 +263,6 @@
return &ei->vfs_inode;
}
-
-
-static void wq_free_rcu(struct rcu_head *head)
-{
- struct socket_wq *wq = container_of(head, struct socket_wq, rcu);
-
- kfree(wq);
-}
-
static void sock_destroy_inode(struct inode *inode)
{
struct socket_alloc *ei;
@@ -279,7 +270,7 @@
ei = container_of(inode, struct socket_alloc, vfs_inode);
wq = rcu_dereference_protected(ei->socket.wq, 1);
- call_rcu(&wq->rcu, wq_free_rcu);
+ kfree_rcu(wq, rcu);
kmem_cache_free(sock_inode_cachep, ei);
}
@@ -551,11 +542,10 @@
}
EXPORT_SYMBOL(sock_tx_timestamp);
-static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
- struct msghdr *msg, size_t size)
+static inline int __sock_sendmsg_nosec(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t size)
{
struct sock_iocb *si = kiocb_to_siocb(iocb);
- int err;
sock_update_classid(sock->sk);
@@ -564,13 +554,17 @@
si->msg = msg;
si->size = size;
- err = security_socket_sendmsg(sock, msg, size);
- if (err)
- return err;
-
return sock->ops->sendmsg(iocb, sock, msg, size);
}
+static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t size)
+{
+ int err = security_socket_sendmsg(sock, msg, size);
+
+ return err ?: __sock_sendmsg_nosec(iocb, sock, msg, size);
+}
+
int sock_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
{
struct kiocb iocb;
@@ -586,6 +580,20 @@
}
EXPORT_SYMBOL(sock_sendmsg);
+int sock_sendmsg_nosec(struct socket *sock, struct msghdr *msg, size_t size)
+{
+ struct kiocb iocb;
+ struct sock_iocb siocb;
+ int ret;
+
+ init_sync_kiocb(&iocb, NULL);
+ iocb.private = &siocb;
+ ret = __sock_sendmsg_nosec(&iocb, sock, msg, size);
+ if (-EIOCBQUEUED == ret)
+ ret = wait_on_sync_kiocb(&iocb);
+ return ret;
+}
+
int kernel_sendmsg(struct socket *sock, struct msghdr *msg,
struct kvec *vec, size_t num, size_t size)
{
@@ -1863,57 +1871,47 @@
#define COMPAT_NAMELEN(msg) COMPAT_MSG(msg, msg_namelen)
#define COMPAT_FLAGS(msg) COMPAT_MSG(msg, msg_flags)
-/*
- * BSD sendmsg interface
- */
-
-SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
+static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
+ struct msghdr *msg_sys, unsigned flags, int nosec)
{
struct compat_msghdr __user *msg_compat =
(struct compat_msghdr __user *)msg;
- struct socket *sock;
struct sockaddr_storage address;
struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
unsigned char ctl[sizeof(struct cmsghdr) + 20]
__attribute__ ((aligned(sizeof(__kernel_size_t))));
/* 20 is size of ipv6_pktinfo */
unsigned char *ctl_buf = ctl;
- struct msghdr msg_sys;
int err, ctl_len, iov_size, total_len;
- int fput_needed;
err = -EFAULT;
if (MSG_CMSG_COMPAT & flags) {
- if (get_compat_msghdr(&msg_sys, msg_compat))
+ if (get_compat_msghdr(msg_sys, msg_compat))
return -EFAULT;
- } else if (copy_from_user(&msg_sys, msg, sizeof(struct msghdr)))
+ } else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr)))
return -EFAULT;
- sock = sockfd_lookup_light(fd, &err, &fput_needed);
- if (!sock)
- goto out;
-
/* do not move before msg_sys is valid */
err = -EMSGSIZE;
- if (msg_sys.msg_iovlen > UIO_MAXIOV)
- goto out_put;
+ if (msg_sys->msg_iovlen > UIO_MAXIOV)
+ goto out;
/* Check whether to allocate the iovec area */
err = -ENOMEM;
- iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
- if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+ iov_size = msg_sys->msg_iovlen * sizeof(struct iovec);
+ if (msg_sys->msg_iovlen > UIO_FASTIOV) {
iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
if (!iov)
- goto out_put;
+ goto out;
}
/* This will also move the address data into kernel space */
if (MSG_CMSG_COMPAT & flags) {
- err = verify_compat_iovec(&msg_sys, iov,
+ err = verify_compat_iovec(msg_sys, iov,
(struct sockaddr *)&address,
VERIFY_READ);
} else
- err = verify_iovec(&msg_sys, iov,
+ err = verify_iovec(msg_sys, iov,
(struct sockaddr *)&address,
VERIFY_READ);
if (err < 0)
@@ -1922,17 +1920,17 @@
err = -ENOBUFS;
- if (msg_sys.msg_controllen > INT_MAX)
+ if (msg_sys->msg_controllen > INT_MAX)
goto out_freeiov;
- ctl_len = msg_sys.msg_controllen;
+ ctl_len = msg_sys->msg_controllen;
if ((MSG_CMSG_COMPAT & flags) && ctl_len) {
err =
- cmsghdr_from_user_compat_to_kern(&msg_sys, sock->sk, ctl,
+ cmsghdr_from_user_compat_to_kern(msg_sys, sock->sk, ctl,
sizeof(ctl));
if (err)
goto out_freeiov;
- ctl_buf = msg_sys.msg_control;
- ctl_len = msg_sys.msg_controllen;
+ ctl_buf = msg_sys->msg_control;
+ ctl_len = msg_sys->msg_controllen;
} else if (ctl_len) {
if (ctl_len > sizeof(ctl)) {
ctl_buf = sock_kmalloc(sock->sk, ctl_len, GFP_KERNEL);
@@ -1941,21 +1939,22 @@
}
err = -EFAULT;
/*
- * Careful! Before this, msg_sys.msg_control contains a user pointer.
+ * Careful! Before this, msg_sys->msg_control contains a user pointer.
* Afterwards, it will be a kernel pointer. Thus the compiler-assisted
* checking falls down on this.
*/
if (copy_from_user(ctl_buf,
- (void __user __force *)msg_sys.msg_control,
+ (void __user __force *)msg_sys->msg_control,
ctl_len))
goto out_freectl;
- msg_sys.msg_control = ctl_buf;
+ msg_sys->msg_control = ctl_buf;
}
- msg_sys.msg_flags = flags;
+ msg_sys->msg_flags = flags;
if (sock->file->f_flags & O_NONBLOCK)
- msg_sys.msg_flags |= MSG_DONTWAIT;
- err = sock_sendmsg(sock, &msg_sys, total_len);
+ msg_sys->msg_flags |= MSG_DONTWAIT;
+ err = (nosec ? sock_sendmsg_nosec : sock_sendmsg)(sock, msg_sys,
+ total_len);
out_freectl:
if (ctl_buf != ctl)
@@ -1963,12 +1962,114 @@
out_freeiov:
if (iov != iovstack)
sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
+out:
+ return err;
+}
+
+/*
+ * BSD sendmsg interface
+ */
+
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
+{
+ int fput_needed, err;
+ struct msghdr msg_sys;
+ struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed);
+
+ if (!sock)
+ goto out;
+
+ err = __sys_sendmsg(sock, msg, &msg_sys, flags, 0);
+
fput_light(sock->file, fput_needed);
out:
return err;
}
+/*
+ * Linux sendmmsg interface
+ */
+
+int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+ unsigned int flags)
+{
+ int fput_needed, err, datagrams;
+ struct socket *sock;
+ struct mmsghdr __user *entry;
+ struct compat_mmsghdr __user *compat_entry;
+ struct msghdr msg_sys;
+
+ datagrams = 0;
+
+ sock = sockfd_lookup_light(fd, &err, &fput_needed);
+ if (!sock)
+ return err;
+
+ err = sock_error(sock->sk);
+ if (err)
+ goto out_put;
+
+ entry = mmsg;
+ compat_entry = (struct compat_mmsghdr __user *)mmsg;
+
+ while (datagrams < vlen) {
+ /*
+ * No need to ask LSM for more than the first datagram.
+ */
+ if (MSG_CMSG_COMPAT & flags) {
+ err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
+ &msg_sys, flags, datagrams);
+ if (err < 0)
+ break;
+ err = __put_user(err, &compat_entry->msg_len);
+ ++compat_entry;
+ } else {
+ err = __sys_sendmsg(sock, (struct msghdr __user *)entry,
+ &msg_sys, flags, datagrams);
+ if (err < 0)
+ break;
+ err = put_user(err, &entry->msg_len);
+ ++entry;
+ }
+
+ if (err)
+ break;
+ ++datagrams;
+ }
+
+out_put:
+ fput_light(sock->file, fput_needed);
+
+ if (err == 0)
+ return datagrams;
+
+ if (datagrams != 0) {
+ /*
+ * We may send less entries than requested (vlen) if the
+ * sock is non blocking...
+ */
+ if (err != -EAGAIN) {
+ /*
+ * ... or if sendmsg returns an error after we
+ * send some datagrams, where we record the
+ * error to return on the next call or if the
+ * app asks about it using getsockopt(SO_ERROR).
+ */
+ sock->sk->sk_err = -err;
+ }
+
+ return datagrams;
+ }
+
+ return err;
+}
+
+SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg,
+ unsigned int, vlen, unsigned int, flags)
+{
+ return __sys_sendmmsg(fd, mmsg, vlen, flags);
+}
+
static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
struct msghdr *msg_sys, unsigned flags, int nosec)
{
@@ -2122,14 +2223,16 @@
*/
if (MSG_CMSG_COMPAT & flags) {
err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
- &msg_sys, flags, datagrams);
+ &msg_sys, flags & ~MSG_WAITFORONE,
+ datagrams);
if (err < 0)
break;
err = __put_user(err, &compat_entry->msg_len);
++compat_entry;
} else {
err = __sys_recvmsg(sock, (struct msghdr __user *)entry,
- &msg_sys, flags, datagrams);
+ &msg_sys, flags & ~MSG_WAITFORONE,
+ datagrams);
if (err < 0)
break;
err = put_user(err, &entry->msg_len);
@@ -2214,11 +2317,11 @@
#ifdef __ARCH_WANT_SYS_SOCKETCALL
/* Argument list sizes for sys_socketcall */
#define AL(x) ((x) * sizeof(unsigned long))
-static const unsigned char nargs[20] = {
+static const unsigned char nargs[21] = {
AL(0), AL(3), AL(3), AL(3), AL(2), AL(3),
AL(3), AL(3), AL(4), AL(4), AL(4), AL(6),
AL(6), AL(2), AL(5), AL(5), AL(3), AL(3),
- AL(4), AL(5)
+ AL(4), AL(5), AL(4)
};
#undef AL
@@ -2238,7 +2341,7 @@
int err;
unsigned int len;
- if (call < 1 || call > SYS_RECVMMSG)
+ if (call < 1 || call > SYS_SENDMMSG)
return -EINVAL;
len = nargs[call];
@@ -2313,6 +2416,9 @@
case SYS_SENDMSG:
err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]);
break;
+ case SYS_SENDMMSG:
+ err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]);
+ break;
case SYS_RECVMSG:
err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
break;
@@ -2643,13 +2749,13 @@
return -EFAULT;
if (convert_in) {
- /* We expect there to be holes between fs.m_u and
+ /* We expect there to be holes between fs.m_ext and
* fs.ring_cookie and at the end of fs, but nowhere else.
*/
- BUILD_BUG_ON(offsetof(struct compat_ethtool_rxnfc, fs.m_u) +
- sizeof(compat_rxnfc->fs.m_u) !=
- offsetof(struct ethtool_rxnfc, fs.m_u) +
- sizeof(rxnfc->fs.m_u));
+ BUILD_BUG_ON(offsetof(struct compat_ethtool_rxnfc, fs.m_ext) +
+ sizeof(compat_rxnfc->fs.m_ext) !=
+ offsetof(struct ethtool_rxnfc, fs.m_ext) +
+ sizeof(rxnfc->fs.m_ext));
BUILD_BUG_ON(
offsetof(struct compat_ethtool_rxnfc, fs.location) -
offsetof(struct compat_ethtool_rxnfc, fs.ring_cookie) !=
@@ -2657,7 +2763,7 @@
offsetof(struct ethtool_rxnfc, fs.ring_cookie));
if (copy_in_user(rxnfc, compat_rxnfc,
- (void *)(&rxnfc->fs.m_u + 1) -
+ (void *)(&rxnfc->fs.m_ext + 1) -
(void *)rxnfc) ||
copy_in_user(&rxnfc->fs.ring_cookie,
&compat_rxnfc->fs.ring_cookie,
@@ -2674,7 +2780,7 @@
if (convert_out) {
if (copy_in_user(compat_rxnfc, rxnfc,
- (const void *)(&rxnfc->fs.m_u + 1) -
+ (const void *)(&rxnfc->fs.m_ext + 1) -
(const void *)rxnfc) ||
copy_in_user(&compat_rxnfc->fs.ring_cookie,
&rxnfc->fs.ring_cookie,
diff --git a/net/tipc/addr.h b/net/tipc/addr.h
index 8971aba..e4f35af 100644
--- a/net/tipc/addr.h
+++ b/net/tipc/addr.h
@@ -37,14 +37,17 @@
#ifndef _TIPC_ADDR_H
#define _TIPC_ADDR_H
+#define TIPC_ZONE_MASK 0xff000000u
+#define TIPC_CLUSTER_MASK 0xfffff000u
+
static inline u32 tipc_zone_mask(u32 addr)
{
- return addr & 0xff000000u;
+ return addr & TIPC_ZONE_MASK;
}
static inline u32 tipc_cluster_mask(u32 addr)
{
- return addr & 0xfffff000u;
+ return addr & TIPC_CLUSTER_MASK;
}
static inline int in_own_cluster(u32 addr)
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index 7dc1dc7..fa68d1e 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -44,13 +44,6 @@
#define BCLINK_WIN_DEFAULT 20 /* bcast link window size (default) */
-/*
- * Loss rate for incoming broadcast frames; used to test retransmission code.
- * Set to N to cause every N'th frame to be discarded; 0 => don't discard any.
- */
-
-#define TIPC_BCAST_LOSS_RATE 0
-
/**
* struct bcbearer_pair - a pair of bearers used by broadcast link
* @primary: pointer to primary bearer
@@ -414,9 +407,7 @@
spin_lock_bh(&bc_lock);
res = tipc_link_send_buf(bcl, buf);
- if (unlikely(res == -ELINKCONG))
- buf_discard(buf);
- else
+ if (likely(res > 0))
bclink_set_last_sent();
bcl->stats.queue_sz_counts++;
@@ -434,9 +425,6 @@
void tipc_bclink_recv_pkt(struct sk_buff *buf)
{
-#if (TIPC_BCAST_LOSS_RATE)
- static int rx_count;
-#endif
struct tipc_msg *msg = buf_msg(buf);
struct tipc_node *node = tipc_node_find(msg_prevnode(msg));
u32 next_in;
@@ -470,14 +458,6 @@
return;
}
-#if (TIPC_BCAST_LOSS_RATE)
- if (++rx_count == TIPC_BCAST_LOSS_RATE) {
- rx_count = 0;
- buf_discard(buf);
- return;
- }
-#endif
-
tipc_node_lock(node);
receive:
deferred = node->bclink.deferred_head;
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 411719f..85209ea 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -46,6 +46,8 @@
struct tipc_bearer tipc_bearers[MAX_BEARERS];
+static void bearer_disable(struct tipc_bearer *b_ptr);
+
/**
* media_name_valid - validate media name
*
@@ -342,15 +344,15 @@
void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest)
{
tipc_nmap_add(&b_ptr->nodes, dest);
- tipc_disc_update_link_req(b_ptr->link_req);
tipc_bcbearer_sort();
+ tipc_disc_add_dest(b_ptr->link_req);
}
void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest)
{
tipc_nmap_remove(&b_ptr->nodes, dest);
- tipc_disc_update_link_req(b_ptr->link_req);
tipc_bcbearer_sort();
+ tipc_disc_remove_dest(b_ptr->link_req);
}
/*
@@ -493,8 +495,15 @@
warn("Bearer <%s> rejected, illegal name\n", name);
return -EINVAL;
}
- if (!tipc_addr_domain_valid(disc_domain) ||
- !tipc_in_scope(disc_domain, tipc_own_addr)) {
+ if (tipc_addr_domain_valid(disc_domain) &&
+ (disc_domain != tipc_own_addr)) {
+ if (tipc_in_scope(disc_domain, tipc_own_addr)) {
+ disc_domain = tipc_own_addr & TIPC_CLUSTER_MASK;
+ res = 0; /* accept any node in own cluster */
+ } else if (in_own_cluster(disc_domain))
+ res = 0; /* accept specified node in own cluster */
+ }
+ if (res) {
warn("Bearer <%s> rejected, illegal discovery domain\n", name);
return -EINVAL;
}
@@ -511,7 +520,7 @@
if (!m_ptr) {
warn("Bearer <%s> rejected, media <%s> not registered\n", name,
b_name.media_name);
- goto failed;
+ goto exit;
}
if (priority == TIPC_MEDIA_LINK_PRI)
@@ -527,14 +536,14 @@
}
if (!strcmp(name, tipc_bearers[i].name)) {
warn("Bearer <%s> rejected, already enabled\n", name);
- goto failed;
+ goto exit;
}
if ((tipc_bearers[i].priority == priority) &&
(++with_this_prio > 2)) {
if (priority-- == 0) {
warn("Bearer <%s> rejected, duplicate priority\n",
name);
- goto failed;
+ goto exit;
}
warn("Bearer <%s> priority adjustment required %u->%u\n",
name, priority + 1, priority);
@@ -544,7 +553,7 @@
if (bearer_id >= MAX_BEARERS) {
warn("Bearer <%s> rejected, bearer limit reached (%u)\n",
name, MAX_BEARERS);
- goto failed;
+ goto exit;
}
b_ptr = &tipc_bearers[bearer_id];
@@ -552,7 +561,7 @@
res = m_ptr->enable_bearer(b_ptr);
if (res) {
warn("Bearer <%s> rejected, enable failure (%d)\n", name, -res);
- goto failed;
+ goto exit;
}
b_ptr->identity = bearer_id;
@@ -562,14 +571,18 @@
b_ptr->priority = priority;
INIT_LIST_HEAD(&b_ptr->cong_links);
INIT_LIST_HEAD(&b_ptr->links);
- b_ptr->link_req = tipc_disc_init_link_req(b_ptr, &m_ptr->bcast_addr,
- disc_domain);
spin_lock_init(&b_ptr->lock);
- write_unlock_bh(&tipc_net_lock);
+
+ res = tipc_disc_create(b_ptr, &m_ptr->bcast_addr, disc_domain);
+ if (res) {
+ bearer_disable(b_ptr);
+ warn("Bearer <%s> rejected, discovery object creation failed\n",
+ name);
+ goto exit;
+ }
info("Enabled bearer <%s>, discovery domain %s, priority %u\n",
name, tipc_addr_string_fill(addr_string, disc_domain), priority);
- return 0;
-failed:
+exit:
write_unlock_bh(&tipc_net_lock);
return res;
}
@@ -620,14 +633,14 @@
struct link *temp_l_ptr;
info("Disabling bearer <%s>\n", b_ptr->name);
- tipc_disc_stop_link_req(b_ptr->link_req);
spin_lock_bh(&b_ptr->lock);
- b_ptr->link_req = NULL;
b_ptr->blocked = 1;
b_ptr->media->disable_bearer(b_ptr);
list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
tipc_link_delete(l_ptr);
}
+ if (b_ptr->link_req)
+ tipc_disc_delete(b_ptr->link_req);
spin_unlock_bh(&b_ptr->lock);
memset(b_ptr, 0, sizeof(struct tipc_bearer));
}
diff --git a/net/tipc/core.c b/net/tipc/core.c
index c9a73e7..943b6af 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -179,8 +179,7 @@
if (tipc_log_resize(CONFIG_TIPC_LOG) != 0)
warn("Unable to create log buffer\n");
- info("Activated (version " TIPC_MOD_VER
- " compiled " __DATE__ " " __TIME__ ")\n");
+ info("Activated (version " TIPC_MOD_VER ")\n");
tipc_own_addr = 0;
tipc_remote_management = 1;
diff --git a/net/tipc/discover.c b/net/tipc/discover.c
index 491eff5..0987933 100644
--- a/net/tipc/discover.c
+++ b/net/tipc/discover.c
@@ -39,19 +39,17 @@
#include "discover.h"
#define TIPC_LINK_REQ_INIT 125 /* min delay during bearer start up */
-#define TIPC_LINK_REQ_FAST 2000 /* normal delay if bearer has no links */
-#define TIPC_LINK_REQ_SLOW 600000 /* normal delay if bearer has links */
-
-/*
- * TODO: Most of the inter-cluster setup stuff should be
- * rewritten, and be made conformant with specification.
- */
+#define TIPC_LINK_REQ_FAST 1000 /* max delay if bearer has no links */
+#define TIPC_LINK_REQ_SLOW 60000 /* max delay if bearer has links */
+#define TIPC_LINK_REQ_INACTIVE 0xffffffff /* indicates no timer in use */
/**
* struct link_req - information about an ongoing link setup request
* @bearer: bearer issuing requests
* @dest: destination address for request messages
+ * @domain: network domain to which links can be established
+ * @num_nodes: number of nodes currently discovered (i.e. with an active link)
* @buf: request message to be (repeatedly) sent
* @timer: timer governing period between requests
* @timer_intv: current interval between requests (in ms)
@@ -59,6 +57,8 @@
struct link_req {
struct tipc_bearer *bearer;
struct tipc_media_addr dest;
+ u32 domain;
+ int num_nodes;
struct sk_buff *buf;
struct timer_list timer;
unsigned int timer_intv;
@@ -147,7 +147,7 @@
}
if (!tipc_in_scope(dest, tipc_own_addr))
return;
- if (!in_own_cluster(orig))
+ if (!tipc_in_scope(b_ptr->link_req->domain, orig))
return;
/* Locate structure corresponding to requesting node */
@@ -214,44 +214,54 @@
}
/**
- * tipc_disc_stop_link_req - stop sending periodic link setup requests
+ * disc_update - update frequency of periodic link setup requests
* @req: ptr to link request structure
+ *
+ * Reinitiates discovery process if discovery object has no associated nodes
+ * and is either not currently searching or is searching at a slow rate
*/
-void tipc_disc_stop_link_req(struct link_req *req)
+static void disc_update(struct link_req *req)
{
- if (!req)
- return;
-
- k_cancel_timer(&req->timer);
- k_term_timer(&req->timer);
- buf_discard(req->buf);
- kfree(req);
+ if (!req->num_nodes) {
+ if ((req->timer_intv == TIPC_LINK_REQ_INACTIVE) ||
+ (req->timer_intv > TIPC_LINK_REQ_FAST)) {
+ req->timer_intv = TIPC_LINK_REQ_INIT;
+ k_start_timer(&req->timer, req->timer_intv);
+ }
+ }
}
/**
- * tipc_disc_update_link_req - update frequency of periodic link setup requests
+ * tipc_disc_add_dest - increment set of discovered nodes
* @req: ptr to link request structure
*/
-void tipc_disc_update_link_req(struct link_req *req)
+void tipc_disc_add_dest(struct link_req *req)
{
- if (!req)
- return;
+ req->num_nodes++;
+}
- if (req->timer_intv == TIPC_LINK_REQ_SLOW) {
- if (!req->bearer->nodes.count) {
- req->timer_intv = TIPC_LINK_REQ_FAST;
- k_start_timer(&req->timer, req->timer_intv);
- }
- } else if (req->timer_intv == TIPC_LINK_REQ_FAST) {
- if (req->bearer->nodes.count) {
- req->timer_intv = TIPC_LINK_REQ_SLOW;
- k_start_timer(&req->timer, req->timer_intv);
- }
- } else {
- /* leave timer "as is" if haven't yet reached a "normal" rate */
- }
+/**
+ * tipc_disc_remove_dest - decrement set of discovered nodes
+ * @req: ptr to link request structure
+ */
+
+void tipc_disc_remove_dest(struct link_req *req)
+{
+ req->num_nodes--;
+ disc_update(req);
+}
+
+/**
+ * disc_send_msg - send link setup request message
+ * @req: ptr to link request structure
+ */
+
+static void disc_send_msg(struct link_req *req)
+{
+ if (!req->bearer->blocked)
+ tipc_bearer_send(req->bearer, req->buf, &req->dest);
}
/**
@@ -263,56 +273,86 @@
static void disc_timeout(struct link_req *req)
{
+ int max_delay;
+
spin_lock_bh(&req->bearer->lock);
- req->bearer->media->send_msg(req->buf, req->bearer, &req->dest);
+ /* Stop searching if only desired node has been found */
- if ((req->timer_intv == TIPC_LINK_REQ_SLOW) ||
- (req->timer_intv == TIPC_LINK_REQ_FAST)) {
- /* leave timer interval "as is" if already at a "normal" rate */
- } else {
- req->timer_intv *= 2;
- if (req->timer_intv > TIPC_LINK_REQ_FAST)
- req->timer_intv = TIPC_LINK_REQ_FAST;
- if ((req->timer_intv == TIPC_LINK_REQ_FAST) &&
- (req->bearer->nodes.count))
- req->timer_intv = TIPC_LINK_REQ_SLOW;
+ if (tipc_node(req->domain) && req->num_nodes) {
+ req->timer_intv = TIPC_LINK_REQ_INACTIVE;
+ goto exit;
}
- k_start_timer(&req->timer, req->timer_intv);
+ /*
+ * Send discovery message, then update discovery timer
+ *
+ * Keep doubling time between requests until limit is reached;
+ * hold at fast polling rate if don't have any associated nodes,
+ * otherwise hold at slow polling rate
+ */
+
+ disc_send_msg(req);
+
+ req->timer_intv *= 2;
+ if (req->num_nodes)
+ max_delay = TIPC_LINK_REQ_SLOW;
+ else
+ max_delay = TIPC_LINK_REQ_FAST;
+ if (req->timer_intv > max_delay)
+ req->timer_intv = max_delay;
+
+ k_start_timer(&req->timer, req->timer_intv);
+exit:
spin_unlock_bh(&req->bearer->lock);
}
/**
- * tipc_disc_init_link_req - start sending periodic link setup requests
+ * tipc_disc_create - create object to send periodic link setup requests
* @b_ptr: ptr to bearer issuing requests
* @dest: destination address for request messages
- * @dest_domain: network domain of node(s) which should respond to message
+ * @dest_domain: network domain to which links can be established
*
- * Returns pointer to link request structure, or NULL if unable to create.
+ * Returns 0 if successful, otherwise -errno.
*/
-struct link_req *tipc_disc_init_link_req(struct tipc_bearer *b_ptr,
- const struct tipc_media_addr *dest,
- u32 dest_domain)
+int tipc_disc_create(struct tipc_bearer *b_ptr,
+ struct tipc_media_addr *dest, u32 dest_domain)
{
struct link_req *req;
req = kmalloc(sizeof(*req), GFP_ATOMIC);
if (!req)
- return NULL;
+ return -ENOMEM;
req->buf = tipc_disc_init_msg(DSC_REQ_MSG, dest_domain, b_ptr);
if (!req->buf) {
kfree(req);
- return NULL;
+ return -ENOMSG;
}
memcpy(&req->dest, dest, sizeof(*dest));
req->bearer = b_ptr;
+ req->domain = dest_domain;
+ req->num_nodes = 0;
req->timer_intv = TIPC_LINK_REQ_INIT;
k_init_timer(&req->timer, (Handler)disc_timeout, (unsigned long)req);
k_start_timer(&req->timer, req->timer_intv);
- return req;
+ b_ptr->link_req = req;
+ disc_send_msg(req);
+ return 0;
+}
+
+/**
+ * tipc_disc_delete - destroy object sending periodic link setup requests
+ * @req: ptr to link request structure
+ */
+
+void tipc_disc_delete(struct link_req *req)
+{
+ k_cancel_timer(&req->timer);
+ k_term_timer(&req->timer);
+ buf_discard(req->buf);
+ kfree(req);
}
diff --git a/net/tipc/discover.h b/net/tipc/discover.h
index e48a167..a3af595 100644
--- a/net/tipc/discover.h
+++ b/net/tipc/discover.h
@@ -39,12 +39,11 @@
struct link_req;
-struct link_req *tipc_disc_init_link_req(struct tipc_bearer *b_ptr,
- const struct tipc_media_addr *dest,
- u32 dest_domain);
-void tipc_disc_update_link_req(struct link_req *req);
-void tipc_disc_stop_link_req(struct link_req *req);
-
+int tipc_disc_create(struct tipc_bearer *b_ptr, struct tipc_media_addr *dest,
+ u32 dest_domain);
+void tipc_disc_delete(struct link_req *req);
+void tipc_disc_add_dest(struct link_req *req);
+void tipc_disc_remove_dest(struct link_req *req);
void tipc_disc_recv_msg(struct sk_buff *buf, struct tipc_bearer *b_ptr);
#endif
diff --git a/net/tipc/link.c b/net/tipc/link.c
index ebf338f..5ed4b4f 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -92,7 +92,8 @@
static void link_set_supervision_props(struct link *l_ptr, u32 tolerance);
static int link_send_sections_long(struct tipc_port *sender,
struct iovec const *msg_sect,
- u32 num_sect, u32 destnode);
+ u32 num_sect, unsigned int total_len,
+ u32 destnode);
static void link_check_defragm_bufs(struct link *l_ptr);
static void link_state_event(struct link *l_ptr, u32 event);
static void link_reset_statistics(struct link *l_ptr);
@@ -842,6 +843,25 @@
l_ptr->stats.max_queue_sz = l_ptr->out_queue_size;
}
+static void link_add_chain_to_outqueue(struct link *l_ptr,
+ struct sk_buff *buf_chain,
+ u32 long_msgno)
+{
+ struct sk_buff *buf;
+ struct tipc_msg *msg;
+
+ if (!l_ptr->next_out)
+ l_ptr->next_out = buf_chain;
+ while (buf_chain) {
+ buf = buf_chain;
+ buf_chain = buf_chain->next;
+
+ msg = buf_msg(buf);
+ msg_set_long_msgno(msg, long_msgno);
+ link_add_to_outqueue(l_ptr, buf, msg);
+ }
+}
+
/*
* tipc_link_send_buf() is the 'full path' for messages, called from
* inside TIPC when the 'fast path' in tipc_send_buf
@@ -864,8 +884,9 @@
if (unlikely(queue_size >= queue_limit)) {
if (imp <= TIPC_CRITICAL_IMPORTANCE) {
- return link_schedule_port(l_ptr, msg_origport(msg),
- size);
+ link_schedule_port(l_ptr, msg_origport(msg), size);
+ buf_discard(buf);
+ return -ELINKCONG;
}
buf_discard(buf);
if (imp > CONN_MANAGER) {
@@ -1042,6 +1063,7 @@
int tipc_link_send_sections_fast(struct tipc_port *sender,
struct iovec const *msg_sect,
const u32 num_sect,
+ unsigned int total_len,
u32 destaddr)
{
struct tipc_msg *hdr = &sender->phdr;
@@ -1057,8 +1079,8 @@
* (Must not hold any locks while building message.)
*/
- res = tipc_msg_build(hdr, msg_sect, num_sect, sender->max_pkt,
- !sender->user_port, &buf);
+ res = tipc_msg_build(hdr, msg_sect, num_sect, total_len,
+ sender->max_pkt, !sender->user_port, &buf);
read_lock_bh(&tipc_net_lock);
node = tipc_node_find(destaddr);
@@ -1069,8 +1091,6 @@
if (likely(buf)) {
res = link_send_buf_fast(l_ptr, buf,
&sender->max_pkt);
- if (unlikely(res < 0))
- buf_discard(buf);
exit:
tipc_node_unlock(node);
read_unlock_bh(&tipc_net_lock);
@@ -1105,7 +1125,8 @@
goto again;
return link_send_sections_long(sender, msg_sect,
- num_sect, destaddr);
+ num_sect, total_len,
+ destaddr);
}
tipc_node_unlock(node);
}
@@ -1117,7 +1138,7 @@
return tipc_reject_msg(buf, TIPC_ERR_NO_NODE);
if (res >= 0)
return tipc_port_reject_sections(sender, hdr, msg_sect, num_sect,
- TIPC_ERR_NO_NODE);
+ total_len, TIPC_ERR_NO_NODE);
return res;
}
@@ -1138,12 +1159,13 @@
static int link_send_sections_long(struct tipc_port *sender,
struct iovec const *msg_sect,
u32 num_sect,
+ unsigned int total_len,
u32 destaddr)
{
struct link *l_ptr;
struct tipc_node *node;
struct tipc_msg *hdr = &sender->phdr;
- u32 dsz = msg_data_sz(hdr);
+ u32 dsz = total_len;
u32 max_pkt, fragm_sz, rest;
struct tipc_msg fragm_hdr;
struct sk_buff *buf, *buf_chain, *prev;
@@ -1169,7 +1191,6 @@
tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
INT_H_SIZE, msg_destnode(hdr));
- msg_set_link_selector(&fragm_hdr, sender->ref);
msg_set_size(&fragm_hdr, max_pkt);
msg_set_fragm_no(&fragm_hdr, 1);
@@ -1271,28 +1292,15 @@
buf_discard(buf_chain);
}
return tipc_port_reject_sections(sender, hdr, msg_sect, num_sect,
- TIPC_ERR_NO_NODE);
+ total_len, TIPC_ERR_NO_NODE);
}
- /* Append whole chain to send queue: */
+ /* Append chain of fragments to send queue & send them */
- buf = buf_chain;
- l_ptr->long_msg_seq_no = mod(l_ptr->long_msg_seq_no + 1);
- if (!l_ptr->next_out)
- l_ptr->next_out = buf_chain;
+ l_ptr->long_msg_seq_no++;
+ link_add_chain_to_outqueue(l_ptr, buf_chain, l_ptr->long_msg_seq_no);
+ l_ptr->stats.sent_fragments += fragm_no;
l_ptr->stats.sent_fragmented++;
- while (buf) {
- struct sk_buff *next = buf->next;
- struct tipc_msg *msg = buf_msg(buf);
-
- l_ptr->stats.sent_fragments++;
- msg_set_long_msgno(msg, l_ptr->long_msg_seq_no);
- link_add_to_outqueue(l_ptr, buf, msg);
- buf = next;
- }
-
- /* Send it, if possible: */
-
tipc_link_push_queue(l_ptr);
tipc_node_unlock(node);
return dsz;
@@ -2407,6 +2415,8 @@
*/
static int link_send_long_buf(struct link *l_ptr, struct sk_buff *buf)
{
+ struct sk_buff *buf_chain = NULL;
+ struct sk_buff *buf_chain_tail = (struct sk_buff *)&buf_chain;
struct tipc_msg *inmsg = buf_msg(buf);
struct tipc_msg fragm_hdr;
u32 insize = msg_size(inmsg);
@@ -2415,7 +2425,7 @@
u32 rest = insize;
u32 pack_sz = l_ptr->max_pkt;
u32 fragm_sz = pack_sz - INT_H_SIZE;
- u32 fragm_no = 1;
+ u32 fragm_no = 0;
u32 destaddr;
if (msg_short(inmsg))
@@ -2427,10 +2437,6 @@
tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
INT_H_SIZE, destaddr);
- msg_set_link_selector(&fragm_hdr, msg_link_selector(inmsg));
- msg_set_long_msgno(&fragm_hdr, mod(l_ptr->long_msg_seq_no++));
- msg_set_fragm_no(&fragm_hdr, fragm_no);
- l_ptr->stats.sent_fragmented++;
/* Chop up message: */
@@ -2443,27 +2449,37 @@
}
fragm = tipc_buf_acquire(fragm_sz + INT_H_SIZE);
if (fragm == NULL) {
- warn("Link unable to fragment message\n");
- dsz = -ENOMEM;
- goto exit;
+ buf_discard(buf);
+ while (buf_chain) {
+ buf = buf_chain;
+ buf_chain = buf_chain->next;
+ buf_discard(buf);
+ }
+ return -ENOMEM;
}
msg_set_size(&fragm_hdr, fragm_sz + INT_H_SIZE);
+ fragm_no++;
+ msg_set_fragm_no(&fragm_hdr, fragm_no);
skb_copy_to_linear_data(fragm, &fragm_hdr, INT_H_SIZE);
skb_copy_to_linear_data_offset(fragm, INT_H_SIZE, crs,
fragm_sz);
- /* Send queued messages first, if any: */
+ buf_chain_tail->next = fragm;
+ buf_chain_tail = fragm;
- l_ptr->stats.sent_fragments++;
- tipc_link_send_buf(l_ptr, fragm);
- if (!tipc_link_is_up(l_ptr))
- return dsz;
- msg_set_fragm_no(&fragm_hdr, ++fragm_no);
rest -= fragm_sz;
crs += fragm_sz;
msg_set_type(&fragm_hdr, FRAGMENT);
}
-exit:
buf_discard(buf);
+
+ /* Append chain of fragments to send queue & send them */
+
+ l_ptr->long_msg_seq_no++;
+ link_add_chain_to_outqueue(l_ptr, buf_chain, l_ptr->long_msg_seq_no);
+ l_ptr->stats.sent_fragments += fragm_no;
+ l_ptr->stats.sent_fragmented++;
+ tipc_link_push_queue(l_ptr);
+
return dsz;
}
diff --git a/net/tipc/link.h b/net/tipc/link.h
index e6a30db..74fbeca 100644
--- a/net/tipc/link.h
+++ b/net/tipc/link.h
@@ -228,6 +228,7 @@
int tipc_link_send_sections_fast(struct tipc_port *sender,
struct iovec const *msg_sect,
const u32 num_sect,
+ unsigned int total_len,
u32 destnode);
void tipc_link_recv_bundle(struct sk_buff *buf);
int tipc_link_recv_fragment(struct sk_buff **pending,
diff --git a/net/tipc/msg.c b/net/tipc/msg.c
index 6d92d17..03e57bf 100644
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -68,20 +68,6 @@
}
/**
- * tipc_msg_calc_data_size - determine total data size for message
- */
-
-int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect)
-{
- int dsz = 0;
- int i;
-
- for (i = 0; i < num_sect; i++)
- dsz += msg_sect[i].iov_len;
- return dsz;
-}
-
-/**
* tipc_msg_build - create message using specified header and data
*
* Note: Caller must not hold any locks in case copy_from_user() is interrupted!
@@ -89,18 +75,13 @@
* Returns message data size or errno
*/
-int tipc_msg_build(struct tipc_msg *hdr,
- struct iovec const *msg_sect, u32 num_sect,
+int tipc_msg_build(struct tipc_msg *hdr, struct iovec const *msg_sect,
+ u32 num_sect, unsigned int total_len,
int max_size, int usrmem, struct sk_buff **buf)
{
int dsz, sz, hsz, pos, res, cnt;
- dsz = tipc_msg_calc_data_size(msg_sect, num_sect);
- if (unlikely(dsz > TIPC_MAX_USER_MSG_SIZE)) {
- *buf = NULL;
- return -EINVAL;
- }
-
+ dsz = total_len;
pos = hsz = msg_hdr_sz(hdr);
sz = hsz + dsz;
msg_set_size(hdr, sz);
diff --git a/net/tipc/msg.h b/net/tipc/msg.h
index de02339..8452454 100644
--- a/net/tipc/msg.h
+++ b/net/tipc/msg.h
@@ -39,41 +39,24 @@
#include "bearer.h"
+/*
+ * Constants and routines used to read and write TIPC payload message headers
+ *
+ * Note: Some items are also used with TIPC internal message headers
+ */
+
#define TIPC_VERSION 2
/*
- * TIPC user data message header format, version 2:
- *
- *
- * 1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w0:|vers | user |hdr sz |n|d|s|-| message size |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w1:|mstyp| error |rer cnt|lsc|opt p| broadcast ack no |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w2:| link level ack no | broadcast/link level seq no |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w3:| previous node |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w4:| originating port |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w5:| destination port |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w6:| originating node |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w7:| destination node |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w8:| name type / transport sequence number |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w9:| name instance/multicast lower bound |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * wA:| multicast upper bound |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * / /
- * \ options \
- * / /
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
+ * Payload message users are defined in TIPC's public API:
+ * - TIPC_LOW_IMPORTANCE
+ * - TIPC_MEDIUM_IMPORTANCE
+ * - TIPC_HIGH_IMPORTANCE
+ * - TIPC_CRITICAL_IMPORTANCE
+ */
+
+/*
+ * Payload message types
*/
#define TIPC_CONN_MSG 0
@@ -81,6 +64,9 @@
#define TIPC_NAMED_MSG 2
#define TIPC_DIRECT_MSG 3
+/*
+ * Message header sizes
+ */
#define SHORT_H_SIZE 24 /* Connected, in-cluster messages */
#define DIR_MSG_H_SIZE 32 /* Directly addressed messages */
@@ -473,40 +459,11 @@
/*
- TIPC internal message header format, version 2
-
- 1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w0:|vers |msg usr|hdr sz |n|resrv| packet size |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w1:|m typ| sequence gap | broadcast ack no |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w2:| link level ack no/bc_gap_from | seq no / bcast_gap_to |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w3:| previous node |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w4:| next sent broadcast/fragm no | next sent pkt/ fragm msg no |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w5:| session no |rsv=0|r|berid|link prio|netpl|p|
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w6:| originating node |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w7:| destination node |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w8:| transport sequence number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- w9:| msg count / bcast tag | link tolerance |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- \ \
- / User Specific Data /
- \ \
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- NB: CONN_MANAGER use data message format. LINK_CONFIG has own format.
-*/
+ * Constants and routines used to read and write TIPC internal message headers
+ */
/*
- * Internal users
+ * Internal message users
*/
#define BCAST_PROTOCOL 5
@@ -520,7 +477,7 @@
#define LINK_CONFIG 13
/*
- * Connection management protocol messages
+ * Connection management protocol message types
*/
#define CONN_PROBE 0
@@ -528,12 +485,41 @@
#define CONN_ACK 2
/*
- * Name distributor messages
+ * Name distributor message types
*/
#define PUBLICATION 0
#define WITHDRAWAL 1
+/*
+ * Segmentation message types
+ */
+
+#define FIRST_FRAGMENT 0
+#define FRAGMENT 1
+#define LAST_FRAGMENT 2
+
+/*
+ * Link management protocol message types
+ */
+
+#define STATE_MSG 0
+#define RESET_MSG 1
+#define ACTIVATE_MSG 2
+
+/*
+ * Changeover tunnel message types
+ */
+#define DUPLICATE_MSG 0
+#define ORIGINAL_MSG 1
+
+/*
+ * Config protocol message types
+ */
+
+#define DSC_REQ_MSG 0
+#define DSC_RESP_MSG 1
+
/*
* Word 1
@@ -761,50 +747,11 @@
msg_set_bits(m, 9, 0, 0xffff, n);
}
-/*
- * Segmentation message types
- */
-
-#define FIRST_FRAGMENT 0
-#define FRAGMENT 1
-#define LAST_FRAGMENT 2
-
-/*
- * Link management protocol message types
- */
-
-#define STATE_MSG 0
-#define RESET_MSG 1
-#define ACTIVATE_MSG 2
-
-/*
- * Changeover tunnel message types
- */
-#define DUPLICATE_MSG 0
-#define ORIGINAL_MSG 1
-
-/*
- * Routing table message types
- */
-#define EXT_ROUTING_TABLE 0
-#define LOCAL_ROUTING_TABLE 1 /* obsoleted */
-#define SLAVE_ROUTING_TABLE 2
-#define ROUTE_ADDITION 3
-#define ROUTE_REMOVAL 4
-
-/*
- * Config protocol message types
- */
-
-#define DSC_REQ_MSG 0
-#define DSC_RESP_MSG 1
-
u32 tipc_msg_tot_importance(struct tipc_msg *m);
void tipc_msg_init(struct tipc_msg *m, u32 user, u32 type,
u32 hsize, u32 destnode);
-int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect);
-int tipc_msg_build(struct tipc_msg *hdr,
- struct iovec const *msg_sect, u32 num_sect,
+int tipc_msg_build(struct tipc_msg *hdr, struct iovec const *msg_sect,
+ u32 num_sect, unsigned int total_len,
int max_size, int usrmem, struct sk_buff **buf);
static inline void msg_set_media_addr(struct tipc_msg *m, struct tipc_media_addr *a)
diff --git a/net/tipc/port.c b/net/tipc/port.c
index 6ff78f9..c68dc95 100644
--- a/net/tipc/port.c
+++ b/net/tipc/port.c
@@ -74,7 +74,8 @@
*/
int tipc_multicast(u32 ref, struct tipc_name_seq const *seq,
- u32 num_sect, struct iovec const *msg_sect)
+ u32 num_sect, struct iovec const *msg_sect,
+ unsigned int total_len)
{
struct tipc_msg *hdr;
struct sk_buff *buf;
@@ -91,11 +92,14 @@
hdr = &oport->phdr;
msg_set_type(hdr, TIPC_MCAST_MSG);
+ msg_set_lookup_scope(hdr, TIPC_CLUSTER_SCOPE);
+ msg_set_destport(hdr, 0);
+ msg_set_destnode(hdr, 0);
msg_set_nametype(hdr, seq->type);
msg_set_namelower(hdr, seq->lower);
msg_set_nameupper(hdr, seq->upper);
msg_set_hdr_sz(hdr, MCAST_H_SIZE);
- res = tipc_msg_build(hdr, msg_sect, num_sect, MAX_MSG_SIZE,
+ res = tipc_msg_build(hdr, msg_sect, num_sect, total_len, MAX_MSG_SIZE,
!oport->user_port, &buf);
if (unlikely(!buf))
return res;
@@ -161,6 +165,7 @@
/* Deliver a copy of message to each destination port */
if (dp->count != 0) {
+ msg_set_destnode(msg, tipc_own_addr);
if (dp->count == 1) {
msg_set_destport(msg, dp->ports[0]);
tipc_port_recv_msg(buf);
@@ -414,12 +419,12 @@
int tipc_port_reject_sections(struct tipc_port *p_ptr, struct tipc_msg *hdr,
struct iovec const *msg_sect, u32 num_sect,
- int err)
+ unsigned int total_len, int err)
{
struct sk_buff *buf;
int res;
- res = tipc_msg_build(hdr, msg_sect, num_sect, MAX_MSG_SIZE,
+ res = tipc_msg_build(hdr, msg_sect, num_sect, total_len, MAX_MSG_SIZE,
!p_ptr->user_port, &buf);
if (!buf)
return res;
@@ -1065,6 +1070,7 @@
msg_set_orignode(msg, tipc_own_addr);
msg_set_origport(msg, p_ptr->ref);
msg_set_type(msg, TIPC_CONN_MSG);
+ msg_set_lookup_scope(msg, 0);
msg_set_hdr_sz(msg, SHORT_H_SIZE);
p_ptr->probing_interval = PROBING_INTERVAL;
@@ -1158,12 +1164,13 @@
*/
static int tipc_port_recv_sections(struct tipc_port *sender, unsigned int num_sect,
- struct iovec const *msg_sect)
+ struct iovec const *msg_sect,
+ unsigned int total_len)
{
struct sk_buff *buf;
int res;
- res = tipc_msg_build(&sender->phdr, msg_sect, num_sect,
+ res = tipc_msg_build(&sender->phdr, msg_sect, num_sect, total_len,
MAX_MSG_SIZE, !sender->user_port, &buf);
if (likely(buf))
tipc_port_recv_msg(buf);
@@ -1174,7 +1181,8 @@
* tipc_send - send message sections on connection
*/
-int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect)
+int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect,
+ unsigned int total_len)
{
struct tipc_port *p_ptr;
u32 destnode;
@@ -1189,9 +1197,10 @@
destnode = port_peernode(p_ptr);
if (likely(destnode != tipc_own_addr))
res = tipc_link_send_sections_fast(p_ptr, msg_sect, num_sect,
- destnode);
+ total_len, destnode);
else
- res = tipc_port_recv_sections(p_ptr, num_sect, msg_sect);
+ res = tipc_port_recv_sections(p_ptr, num_sect, msg_sect,
+ total_len);
if (likely(res != -ELINKCONG)) {
p_ptr->congested = 0;
@@ -1202,8 +1211,7 @@
}
if (port_unreliable(p_ptr)) {
p_ptr->congested = 0;
- /* Just calculate msg length and return */
- return tipc_msg_calc_data_size(msg_sect, num_sect);
+ return total_len;
}
return -ELINKCONG;
}
@@ -1213,7 +1221,8 @@
*/
int tipc_send2name(u32 ref, struct tipc_name const *name, unsigned int domain,
- unsigned int num_sect, struct iovec const *msg_sect)
+ unsigned int num_sect, struct iovec const *msg_sect,
+ unsigned int total_len)
{
struct tipc_port *p_ptr;
struct tipc_msg *msg;
@@ -1240,23 +1249,23 @@
if (likely(destport)) {
if (likely(destnode == tipc_own_addr))
res = tipc_port_recv_sections(p_ptr, num_sect,
- msg_sect);
+ msg_sect, total_len);
else
res = tipc_link_send_sections_fast(p_ptr, msg_sect,
- num_sect, destnode);
+ num_sect, total_len,
+ destnode);
if (likely(res != -ELINKCONG)) {
if (res > 0)
p_ptr->sent++;
return res;
}
if (port_unreliable(p_ptr)) {
- /* Just calculate msg length and return */
- return tipc_msg_calc_data_size(msg_sect, num_sect);
+ return total_len;
}
return -ELINKCONG;
}
return tipc_port_reject_sections(p_ptr, msg, msg_sect, num_sect,
- TIPC_ERR_NO_NAME);
+ total_len, TIPC_ERR_NO_NAME);
}
/**
@@ -1264,7 +1273,8 @@
*/
int tipc_send2port(u32 ref, struct tipc_portid const *dest,
- unsigned int num_sect, struct iovec const *msg_sect)
+ unsigned int num_sect, struct iovec const *msg_sect,
+ unsigned int total_len)
{
struct tipc_port *p_ptr;
struct tipc_msg *msg;
@@ -1276,6 +1286,7 @@
msg = &p_ptr->phdr;
msg_set_type(msg, TIPC_DIRECT_MSG);
+ msg_set_lookup_scope(msg, 0);
msg_set_orignode(msg, tipc_own_addr);
msg_set_origport(msg, ref);
msg_set_destnode(msg, dest->node);
@@ -1283,18 +1294,18 @@
msg_set_hdr_sz(msg, DIR_MSG_H_SIZE);
if (dest->node == tipc_own_addr)
- res = tipc_port_recv_sections(p_ptr, num_sect, msg_sect);
+ res = tipc_port_recv_sections(p_ptr, num_sect, msg_sect,
+ total_len);
else
res = tipc_link_send_sections_fast(p_ptr, msg_sect, num_sect,
- dest->node);
+ total_len, dest->node);
if (likely(res != -ELINKCONG)) {
if (res > 0)
p_ptr->sent++;
return res;
}
if (port_unreliable(p_ptr)) {
- /* Just calculate msg length and return */
- return tipc_msg_calc_data_size(msg_sect, num_sect);
+ return total_len;
}
return -ELINKCONG;
}
diff --git a/net/tipc/port.h b/net/tipc/port.h
index 87b9424..b9aa341 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -205,23 +205,27 @@
/*
* TIPC messaging routines
*/
-int tipc_send(u32 portref, unsigned int num_sect, struct iovec const *msg_sect);
+int tipc_send(u32 portref, unsigned int num_sect, struct iovec const *msg_sect,
+ unsigned int total_len);
int tipc_send2name(u32 portref, struct tipc_name const *name, u32 domain,
- unsigned int num_sect, struct iovec const *msg_sect);
+ unsigned int num_sect, struct iovec const *msg_sect,
+ unsigned int total_len);
int tipc_send2port(u32 portref, struct tipc_portid const *dest,
- unsigned int num_sect, struct iovec const *msg_sect);
+ unsigned int num_sect, struct iovec const *msg_sect,
+ unsigned int total_len);
int tipc_send_buf2port(u32 portref, struct tipc_portid const *dest,
struct sk_buff *buf, unsigned int dsz);
int tipc_multicast(u32 portref, struct tipc_name_seq const *seq,
- unsigned int section_count, struct iovec const *msg);
+ unsigned int section_count, struct iovec const *msg,
+ unsigned int total_len);
int tipc_port_reject_sections(struct tipc_port *p_ptr, struct tipc_msg *hdr,
struct iovec const *msg_sect, u32 num_sect,
- int err);
+ unsigned int total_len, int err);
struct sk_buff *tipc_port_get_ports(void);
void tipc_port_recv_proto_msg(struct sk_buff *buf);
void tipc_port_recv_mcast(struct sk_buff *buf, struct port_list *dp);
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 29d94d5..3388373 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -535,6 +535,9 @@
if (unlikely((m->msg_namelen < sizeof(*dest)) ||
(dest->family != AF_TIPC)))
return -EINVAL;
+ if ((total_len > TIPC_MAX_USER_MSG_SIZE) ||
+ (m->msg_iovlen > (unsigned)INT_MAX))
+ return -EMSGSIZE;
if (iocb)
lock_sock(sk);
@@ -573,12 +576,14 @@
&dest->addr.name.name,
dest->addr.name.domain,
m->msg_iovlen,
- m->msg_iov);
+ m->msg_iov,
+ total_len);
} else if (dest->addrtype == TIPC_ADDR_ID) {
res = tipc_send2port(tport->ref,
&dest->addr.id,
m->msg_iovlen,
- m->msg_iov);
+ m->msg_iov,
+ total_len);
} else if (dest->addrtype == TIPC_ADDR_MCAST) {
if (needs_conn) {
res = -EOPNOTSUPP;
@@ -590,7 +595,8 @@
res = tipc_multicast(tport->ref,
&dest->addr.nameseq,
m->msg_iovlen,
- m->msg_iov);
+ m->msg_iov,
+ total_len);
}
if (likely(res != -ELINKCONG)) {
if (needs_conn && (res >= 0))
@@ -640,6 +646,10 @@
if (unlikely(dest))
return send_msg(iocb, sock, m, total_len);
+ if ((total_len > TIPC_MAX_USER_MSG_SIZE) ||
+ (m->msg_iovlen > (unsigned)INT_MAX))
+ return -EMSGSIZE;
+
if (iocb)
lock_sock(sk);
@@ -652,7 +662,8 @@
break;
}
- res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov);
+ res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov,
+ total_len);
if (likely(res != -ELINKCONG))
break;
if (m->msg_flags & MSG_DONTWAIT) {
@@ -723,6 +734,12 @@
goto exit;
}
+ if ((total_len > (unsigned)INT_MAX) ||
+ (m->msg_iovlen > (unsigned)INT_MAX)) {
+ res = -EMSGSIZE;
+ goto exit;
+ }
+
/*
* Send each iovec entry using one or more messages
*
@@ -753,7 +770,7 @@
bytes_to_send = curr_left;
my_iov.iov_base = curr_start;
my_iov.iov_len = bytes_to_send;
- res = send_packet(NULL, sock, &my_msg, 0);
+ res = send_packet(NULL, sock, &my_msg, bytes_to_send);
if (res < 0) {
if (bytes_sent)
res = bytes_sent;
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index aae9eae..6cf7268 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -109,7 +109,7 @@
sub->evt.found_upper = htohl(found_upper, sub->swap);
sub->evt.port.ref = htohl(port_ref, sub->swap);
sub->evt.port.node = htohl(node, sub->swap);
- tipc_send(sub->server_ref, 1, &msg_sect);
+ tipc_send(sub->server_ref, 1, &msg_sect, msg_sect.iov_len);
}
/**
@@ -521,7 +521,7 @@
/* Send an ACK- to complete connection handshaking */
- tipc_send(server_port_ref, 0, NULL);
+ tipc_send(server_port_ref, 0, NULL, 0);
/* Handle optional subscription request */
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 3a43a83..b1d75be 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -524,6 +524,8 @@
int, int);
static int unix_seqpacket_sendmsg(struct kiocb *, struct socket *,
struct msghdr *, size_t);
+static int unix_seqpacket_recvmsg(struct kiocb *, struct socket *,
+ struct msghdr *, size_t, int);
static const struct proto_ops unix_stream_ops = {
.family = PF_UNIX,
@@ -583,7 +585,7 @@
.setsockopt = sock_no_setsockopt,
.getsockopt = sock_no_getsockopt,
.sendmsg = unix_seqpacket_sendmsg,
- .recvmsg = unix_dgram_recvmsg,
+ .recvmsg = unix_seqpacket_recvmsg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage,
};
@@ -1699,6 +1701,18 @@
return unix_dgram_sendmsg(kiocb, sock, msg, len);
}
+static int unix_seqpacket_recvmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t size,
+ int flags)
+{
+ struct sock *sk = sock->sk;
+
+ if (sk->sk_state != TCP_ESTABLISHED)
+ return -ENOTCONN;
+
+ return unix_dgram_recvmsg(iocb, sock, msg, size, flags);
+}
+
static void unix_copy_addr(struct msghdr *msg, struct sock *sk)
{
struct unix_sock *u = unix_sk(sk);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index fe01de2..c22ef34 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -46,6 +46,11 @@
/* for the cleanup, scan and event works */
struct workqueue_struct *cfg80211_wq;
+static bool cfg80211_disable_40mhz_24ghz;
+module_param(cfg80211_disable_40mhz_24ghz, bool, 0644);
+MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz,
+ "Disable 40MHz support in the 2.4GHz band");
+
/* requires cfg80211_mutex to be held! */
struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
{
@@ -365,7 +370,7 @@
spin_lock_init(&rdev->bss_lock);
INIT_LIST_HEAD(&rdev->bss_list);
INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
-
+ INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
#ifdef CONFIG_CFG80211_WEXT
rdev->wiphy.wext = &cfg80211_wext_handler;
#endif
@@ -411,6 +416,67 @@
}
EXPORT_SYMBOL(wiphy_new);
+static int wiphy_verify_combinations(struct wiphy *wiphy)
+{
+ const struct ieee80211_iface_combination *c;
+ int i, j;
+
+ /* If we have combinations enforce them */
+ if (wiphy->n_iface_combinations)
+ wiphy->flags |= WIPHY_FLAG_ENFORCE_COMBINATIONS;
+
+ for (i = 0; i < wiphy->n_iface_combinations; i++) {
+ u32 cnt = 0;
+ u16 all_iftypes = 0;
+
+ c = &wiphy->iface_combinations[i];
+
+ /* Combinations with just one interface aren't real */
+ if (WARN_ON(c->max_interfaces < 2))
+ return -EINVAL;
+
+ /* Need at least one channel */
+ if (WARN_ON(!c->num_different_channels))
+ return -EINVAL;
+
+ if (WARN_ON(!c->n_limits))
+ return -EINVAL;
+
+ for (j = 0; j < c->n_limits; j++) {
+ u16 types = c->limits[j].types;
+
+ /*
+ * interface types shouldn't overlap, this is
+ * used in cfg80211_can_change_interface()
+ */
+ if (WARN_ON(types & all_iftypes))
+ return -EINVAL;
+ all_iftypes |= types;
+
+ if (WARN_ON(!c->limits[j].max))
+ return -EINVAL;
+
+ /* Shouldn't list software iftypes in combinations! */
+ if (WARN_ON(wiphy->software_iftypes & types))
+ return -EINVAL;
+
+ cnt += c->limits[j].max;
+ /*
+ * Don't advertise an unsupported type
+ * in a combination.
+ */
+ if (WARN_ON((wiphy->interface_modes & types) != types))
+ return -EINVAL;
+ }
+
+ /* You can't even choose that many! */
+ if (WARN_ON(cnt < c->max_interfaces))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
@@ -439,6 +505,10 @@
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
+ res = wiphy_verify_combinations(wiphy);
+ if (res)
+ return res;
+
/* sanity check supported bands/channels */
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
sband = wiphy->bands[band];
@@ -451,6 +521,18 @@
return -EINVAL;
/*
+ * Since cfg80211_disable_40mhz_24ghz is global, we can
+ * modify the sband's ht data even if the driver uses a
+ * global structure for that.
+ */
+ if (cfg80211_disable_40mhz_24ghz &&
+ band == IEEE80211_BAND_2GHZ &&
+ sband->ht_cap.ht_supported) {
+ sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+
+ /*
* Since we use a u32 for rate bitmaps in
* ieee80211_get_response_rate, we cannot
* have more than 32 legacy rates.
@@ -476,6 +558,13 @@
return -EINVAL;
}
+ if (rdev->wiphy.wowlan.n_patterns) {
+ if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
+ rdev->wiphy.wowlan.pattern_min_len >
+ rdev->wiphy.wowlan.pattern_max_len))
+ return -EINVAL;
+ }
+
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
@@ -614,6 +703,7 @@
mutex_destroy(&rdev->devlist_mtx);
list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
cfg80211_put_bss(&scan->pub);
+ cfg80211_rdev_free_wowlan(rdev);
kfree(rdev);
}
@@ -647,6 +737,11 @@
___cfg80211_scan_done(rdev, true);
}
+ if (WARN_ON(rdev->sched_scan_req &&
+ rdev->sched_scan_req->dev == wdev->netdev)) {
+ __cfg80211_stop_sched_scan(rdev, false);
+ }
+
cfg80211_unlock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
@@ -668,6 +763,7 @@
struct net_device *dev = ndev;
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
+ int ret;
if (!wdev)
return NOTIFY_DONE;
@@ -734,6 +830,10 @@
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
+ cfg80211_lock_rdev(rdev);
+ __cfg80211_stop_sched_scan(rdev, false);
+ cfg80211_unlock_rdev(rdev);
+
wdev_lock(wdev);
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.ie);
@@ -752,6 +852,7 @@
default:
break;
}
+ wdev->beacon_interval = 0;
break;
case NETDEV_DOWN:
dev_hold(dev);
@@ -858,6 +959,9 @@
return notifier_from_errno(-EOPNOTSUPP);
if (rfkill_blocked(rdev->rfkill))
return notifier_from_errno(-ERFKILL);
+ ret = cfg80211_can_add_interface(rdev, wdev->iftype);
+ if (ret)
+ return notifier_from_errno(ret);
break;
}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 26a0a08..bf0fb40 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -60,8 +60,10 @@
struct rb_root bss_tree;
u32 bss_generation;
struct cfg80211_scan_request *scan_req; /* protected by RTNL */
+ struct cfg80211_sched_scan_request *sched_scan_req;
unsigned long suspend_at;
struct work_struct scan_done_wk;
+ struct work_struct sched_scan_results_wk;
#ifdef CONFIG_NL80211_TESTMODE
struct genl_info *testmode_info;
@@ -70,6 +72,8 @@
struct work_struct conn_work;
struct work_struct event_work;
+ struct cfg80211_wowlan *wowlan;
+
/* must be last because of the way we do wiphy_priv(),
* and it should at least be aligned to NETDEV_ALIGN */
struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -89,6 +93,18 @@
return wiphy_idx >= 0;
}
+static inline void
+cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev)
+{
+ int i;
+
+ if (!rdev->wowlan)
+ return;
+ for (i = 0; i < rdev->wowlan->n_patterns; i++)
+ kfree(rdev->wowlan->patterns[i].mask);
+ kfree(rdev->wowlan->patterns);
+ kfree(rdev->wowlan);
+}
extern struct workqueue_struct *cfg80211_wq;
extern struct mutex cfg80211_mutex;
@@ -397,12 +413,26 @@
void cfg80211_sme_disassoc(struct net_device *dev, int idx);
void __cfg80211_scan_done(struct work_struct *wk);
void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak);
+void __cfg80211_sched_scan_results(struct work_struct *wk);
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+ bool driver_initiated);
void cfg80211_upload_connect_keys(struct wireless_dev *wdev);
int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
struct net_device *dev, enum nl80211_iftype ntype,
u32 *flags, struct vif_params *params);
void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev);
+int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev,
+ enum nl80211_iftype iftype);
+
+static inline int
+cfg80211_can_add_interface(struct cfg80211_registered_device *rdev,
+ enum nl80211_iftype iftype)
+{
+ return cfg80211_can_change_interface(rdev, NULL, iftype);
+}
+
struct ieee80211_channel *
rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
int freq, enum nl80211_channel_type channel_type);
@@ -412,6 +442,9 @@
u16 cfg80211_calculate_bitrate(struct rate_info *rate);
+int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
+ u32 beacon_int);
+
#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
#define CFG80211_DEV_WARN_ON(cond) WARN_ON(cond)
#else
diff --git a/net/wireless/lib80211_crypt_wep.c b/net/wireless/lib80211_crypt_wep.c
index e2e8887..2f265e0 100644
--- a/net/wireless/lib80211_crypt_wep.c
+++ b/net/wireless/lib80211_crypt_wep.c
@@ -96,13 +96,12 @@
u8 *key, int keylen, void *priv)
{
struct lib80211_wep_data *wep = priv;
- u32 klen, len;
+ u32 klen;
u8 *pos;
if (skb_headroom(skb) < 4 || skb->len < hdr_len)
return -1;
- len = skb->len - hdr_len;
pos = skb_push(skb, 4);
memmove(pos, pos + 4, hdr_len);
pos += hdr_len;
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 73e39c1..5c11608 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -1,5 +1,6 @@
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
+#include "nl80211.h"
#include "core.h"
/* Default values, timeouts in ms */
@@ -53,8 +54,9 @@
const struct mesh_setup default_mesh_setup = {
.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
- .vendor_ie = NULL,
- .vendor_ie_len = 0,
+ .ie = NULL,
+ .ie_len = 0,
+ .is_secure = false,
};
int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
@@ -72,6 +74,10 @@
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
+ setup->is_secure)
+ return -EOPNOTSUPP;
+
if (wdev->mesh_id_len)
return -EALREADY;
@@ -105,6 +111,19 @@
return err;
}
+void cfg80211_notify_new_peer_candidate(struct net_device *dev,
+ const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_MESH_POINT))
+ return;
+
+ nl80211_send_new_peer_candidate(wiphy_to_dev(wdev->wiphy), dev,
+ macaddr, ie, ie_len, gfp);
+}
+EXPORT_SYMBOL(cfg80211_notify_new_peer_candidate);
+
static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev)
{
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index aa5df88..493b939 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -770,6 +770,15 @@
}
EXPORT_SYMBOL(cfg80211_new_sta);
+void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp)
+{
+ struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ nl80211_send_sta_del_event(rdev, dev, mac_addr, gfp);
+}
+EXPORT_SYMBOL(cfg80211_del_sta);
+
struct cfg80211_mgmt_registration {
struct list_head list;
@@ -954,6 +963,16 @@
if (memcmp(mgmt->bssid, dev->dev_addr, ETH_ALEN))
err = -EINVAL;
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ if (memcmp(mgmt->sa, mgmt->bssid, ETH_ALEN)) {
+ err = -EINVAL;
+ break;
+ }
+ /*
+ * check for mesh DA must be done by driver as
+ * cfg80211 doesn't track the stations
+ */
+ break;
default:
err = -EOPNOTSUPP;
break;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4ebce42..2222ce08 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -124,6 +124,7 @@
[NL80211_ATTR_BSS_HT_OPMODE] = { .type = NLA_U16 },
[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
+ [NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
.len = NL80211_HT_CAPABILITY_LEN },
@@ -172,6 +173,9 @@
[NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 },
[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
+ [NL80211_ATTR_WOWLAN_TRIGGERS] = { .type = NLA_NESTED },
+ [NL80211_ATTR_STA_PLINK_STATE] = { .type = NLA_U8 },
+ [NL80211_ATTR_SCHED_SCAN_INTERVAL] = { .type = NLA_U32 },
};
/* policy for the key attributes */
@@ -193,6 +197,15 @@
[NL80211_KEY_DEFAULT_TYPE_MULTICAST] = { .type = NLA_FLAG },
};
+/* policy for WoWLAN attributes */
+static const struct nla_policy
+nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = {
+ [NL80211_WOWLAN_TRIG_ANY] = { .type = NLA_FLAG },
+ [NL80211_WOWLAN_TRIG_DISCONNECT] = { .type = NLA_FLAG },
+ [NL80211_WOWLAN_TRIG_MAGIC_PKT] = { .type = NLA_FLAG },
+ [NL80211_WOWLAN_TRIG_PKT_PATTERN] = { .type = NLA_NESTED },
+};
+
/* ifidx get helper */
static int nl80211_get_ifidx(struct netlink_callback *cb)
{
@@ -533,6 +546,7 @@
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_MESH_POINT:
break;
case NL80211_IFTYPE_ADHOC:
if (!wdev->current_bss)
@@ -550,6 +564,88 @@
return 0;
}
+static int nl80211_put_iftypes(struct sk_buff *msg, u32 attr, u16 ifmodes)
+{
+ struct nlattr *nl_modes = nla_nest_start(msg, attr);
+ int i;
+
+ if (!nl_modes)
+ goto nla_put_failure;
+
+ i = 0;
+ while (ifmodes) {
+ if (ifmodes & 1)
+ NLA_PUT_FLAG(msg, i);
+ ifmodes >>= 1;
+ i++;
+ }
+
+ nla_nest_end(msg, nl_modes);
+ return 0;
+
+nla_put_failure:
+ return -ENOBUFS;
+}
+
+static int nl80211_put_iface_combinations(struct wiphy *wiphy,
+ struct sk_buff *msg)
+{
+ struct nlattr *nl_combis;
+ int i, j;
+
+ nl_combis = nla_nest_start(msg,
+ NL80211_ATTR_INTERFACE_COMBINATIONS);
+ if (!nl_combis)
+ goto nla_put_failure;
+
+ for (i = 0; i < wiphy->n_iface_combinations; i++) {
+ const struct ieee80211_iface_combination *c;
+ struct nlattr *nl_combi, *nl_limits;
+
+ c = &wiphy->iface_combinations[i];
+
+ nl_combi = nla_nest_start(msg, i + 1);
+ if (!nl_combi)
+ goto nla_put_failure;
+
+ nl_limits = nla_nest_start(msg, NL80211_IFACE_COMB_LIMITS);
+ if (!nl_limits)
+ goto nla_put_failure;
+
+ for (j = 0; j < c->n_limits; j++) {
+ struct nlattr *nl_limit;
+
+ nl_limit = nla_nest_start(msg, j + 1);
+ if (!nl_limit)
+ goto nla_put_failure;
+ NLA_PUT_U32(msg, NL80211_IFACE_LIMIT_MAX,
+ c->limits[j].max);
+ if (nl80211_put_iftypes(msg, NL80211_IFACE_LIMIT_TYPES,
+ c->limits[j].types))
+ goto nla_put_failure;
+ nla_nest_end(msg, nl_limit);
+ }
+
+ nla_nest_end(msg, nl_limits);
+
+ if (c->beacon_int_infra_match)
+ NLA_PUT_FLAG(msg,
+ NL80211_IFACE_COMB_STA_AP_BI_MATCH);
+ NLA_PUT_U32(msg, NL80211_IFACE_COMB_NUM_CHANNELS,
+ c->num_different_channels);
+ NLA_PUT_U32(msg, NL80211_IFACE_COMB_MAXNUM,
+ c->max_interfaces);
+
+ nla_nest_end(msg, nl_combi);
+ }
+
+ nla_nest_end(msg, nl_combis);
+
+ return 0;
+nla_put_failure:
+ return -ENOBUFS;
+}
+
static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *dev)
{
@@ -557,13 +653,11 @@
struct nlattr *nl_bands, *nl_band;
struct nlattr *nl_freqs, *nl_freq;
struct nlattr *nl_rates, *nl_rate;
- struct nlattr *nl_modes;
struct nlattr *nl_cmds;
enum ieee80211_band band;
struct ieee80211_channel *chan;
struct ieee80211_rate *rate;
int i;
- u16 ifmodes = dev->wiphy.interface_modes;
const struct ieee80211_txrx_stypes *mgmt_stypes =
dev->wiphy.mgmt_stypes;
@@ -594,6 +688,8 @@
if (dev->wiphy.flags & WIPHY_FLAG_IBSS_RSN)
NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_IBSS_RSN);
+ if (dev->wiphy.flags & WIPHY_FLAG_MESH_AUTH)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_MESH_AUTH);
NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
sizeof(u32) * dev->wiphy.n_cipher_suites,
@@ -621,20 +717,10 @@
}
}
- nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
- if (!nl_modes)
+ if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
+ dev->wiphy.interface_modes))
goto nla_put_failure;
- i = 0;
- while (ifmodes) {
- if (ifmodes & 1)
- NLA_PUT_FLAG(msg, i);
- ifmodes >>= 1;
- i++;
- }
-
- nla_nest_end(msg, nl_modes);
-
nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
if (!nl_bands)
goto nla_put_failure;
@@ -746,6 +832,8 @@
}
CMD(set_channel, SET_CHANNEL);
CMD(set_wds_peer, SET_WDS_PEER);
+ if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
+ CMD(sched_scan_start, START_SCHED_SCAN);
#undef CMD
@@ -818,6 +906,42 @@
nla_nest_end(msg, nl_ifs);
}
+ if (dev->wiphy.wowlan.flags || dev->wiphy.wowlan.n_patterns) {
+ struct nlattr *nl_wowlan;
+
+ nl_wowlan = nla_nest_start(msg,
+ NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED);
+ if (!nl_wowlan)
+ goto nla_put_failure;
+
+ if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_ANY)
+ NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_ANY);
+ if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_DISCONNECT)
+ NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_DISCONNECT);
+ if (dev->wiphy.wowlan.flags & WIPHY_WOWLAN_MAGIC_PKT)
+ NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT);
+ if (dev->wiphy.wowlan.n_patterns) {
+ struct nl80211_wowlan_pattern_support pat = {
+ .max_patterns = dev->wiphy.wowlan.n_patterns,
+ .min_pattern_len =
+ dev->wiphy.wowlan.pattern_min_len,
+ .max_pattern_len =
+ dev->wiphy.wowlan.pattern_max_len,
+ };
+ NLA_PUT(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN,
+ sizeof(pat), &pat);
+ }
+
+ nla_nest_end(msg, nl_wowlan);
+ }
+
+ if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
+ dev->wiphy.software_iftypes))
+ goto nla_put_failure;
+
+ if (nl80211_put_iface_combinations(&dev->wiphy, msg))
+ goto nla_put_failure;
+
return genlmsg_end(msg, hdr);
nla_put_failure:
@@ -1679,14 +1803,6 @@
if (err)
goto out;
- if (!(rdev->wiphy.flags &
- WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS)) {
- if (!key.def_uni || !key.def_multi) {
- err = -EOPNOTSUPP;
- goto out;
- }
- }
-
err = rdev->ops->set_default_key(&rdev->wiphy, dev, key.idx,
key.def_uni, key.def_multi);
@@ -1837,8 +1953,9 @@
struct beacon_parameters *info);
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
struct beacon_parameters params;
- int haveinfo = 0;
+ int haveinfo = 0, err;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_BEACON_TAIL]))
return -EINVAL;
@@ -1847,6 +1964,8 @@
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
+ memset(¶ms, 0, sizeof(params));
+
switch (info->genlhdr->cmd) {
case NL80211_CMD_NEW_BEACON:
/* these are required for NEW_BEACON */
@@ -1855,6 +1974,15 @@
!info->attrs[NL80211_ATTR_BEACON_HEAD])
return -EINVAL;
+ params.interval =
+ nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
+ params.dtim_period =
+ nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
+
+ err = cfg80211_validate_beacon_int(rdev, params.interval);
+ if (err)
+ return err;
+
call = rdev->ops->add_beacon;
break;
case NL80211_CMD_SET_BEACON:
@@ -1868,20 +1996,6 @@
if (!call)
return -EOPNOTSUPP;
- memset(¶ms, 0, sizeof(params));
-
- if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
- params.interval =
- nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
- haveinfo = 1;
- }
-
- if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) {
- params.dtim_period =
- nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
- haveinfo = 1;
- }
-
if (info->attrs[NL80211_ATTR_BEACON_HEAD]) {
params.head = nla_data(info->attrs[NL80211_ATTR_BEACON_HEAD]);
params.head_len =
@@ -1899,13 +2013,18 @@
if (!haveinfo)
return -EINVAL;
- return call(&rdev->wiphy, dev, ¶ms);
+ err = call(&rdev->wiphy, dev, ¶ms);
+ if (!err && params.interval)
+ wdev->beacon_interval = params.interval;
+ return err;
}
static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
if (!rdev->ops->del_beacon)
return -EOPNOTSUPP;
@@ -1914,7 +2033,10 @@
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EOPNOTSUPP;
- return rdev->ops->del_beacon(&rdev->wiphy, dev);
+ err = rdev->ops->del_beacon(&rdev->wiphy, dev);
+ if (!err)
+ wdev->beacon_interval = 0;
+ return err;
}
static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
@@ -1922,6 +2044,7 @@
[NL80211_STA_FLAG_SHORT_PREAMBLE] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_WME] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
+ [NL80211_STA_FLAG_AUTHENTICATED] = { .type = NLA_FLAG },
};
static int parse_station_flags(struct genl_info *info,
@@ -2002,7 +2125,7 @@
const u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
- struct nlattr *sinfoattr;
+ struct nlattr *sinfoattr, *bss_param;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
@@ -2016,6 +2139,9 @@
sinfoattr = nla_nest_start(msg, NL80211_ATTR_STA_INFO);
if (!sinfoattr)
goto nla_put_failure;
+ if (sinfo->filled & STATION_INFO_CONNECTED_TIME)
+ NLA_PUT_U32(msg, NL80211_STA_INFO_CONNECTED_TIME,
+ sinfo->connected_time);
if (sinfo->filled & STATION_INFO_INACTIVE_TIME)
NLA_PUT_U32(msg, NL80211_STA_INFO_INACTIVE_TIME,
sinfo->inactive_time);
@@ -2062,6 +2188,25 @@
if (sinfo->filled & STATION_INFO_TX_FAILED)
NLA_PUT_U32(msg, NL80211_STA_INFO_TX_FAILED,
sinfo->tx_failed);
+ if (sinfo->filled & STATION_INFO_BSS_PARAM) {
+ bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM);
+ if (!bss_param)
+ goto nla_put_failure;
+
+ if (sinfo->bss_param.flags & BSS_PARAM_FLAGS_CTS_PROT)
+ NLA_PUT_FLAG(msg, NL80211_STA_BSS_PARAM_CTS_PROT);
+ if (sinfo->bss_param.flags & BSS_PARAM_FLAGS_SHORT_PREAMBLE)
+ NLA_PUT_FLAG(msg, NL80211_STA_BSS_PARAM_SHORT_PREAMBLE);
+ if (sinfo->bss_param.flags & BSS_PARAM_FLAGS_SHORT_SLOT_TIME)
+ NLA_PUT_FLAG(msg,
+ NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME);
+ NLA_PUT_U8(msg, NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+ sinfo->bss_param.dtim_period);
+ NLA_PUT_U16(msg, NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+ sinfo->bss_param.beacon_interval);
+
+ nla_nest_end(msg, bss_param);
+ }
nla_nest_end(msg, sinfoattr);
return genlmsg_end(msg, hdr);
@@ -2190,6 +2335,7 @@
memset(¶ms, 0, sizeof(params));
params.listen_interval = -1;
+ params.plink_state = -1;
if (info->attrs[NL80211_ATTR_STA_AID])
return -EINVAL;
@@ -2221,6 +2367,10 @@
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
+ if (info->attrs[NL80211_ATTR_STA_PLINK_STATE])
+ params.plink_state =
+ nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
+
err = get_vlan(info, rdev, ¶ms.vlan);
if (err)
goto out;
@@ -2260,9 +2410,10 @@
err = -EINVAL;
if (params.listen_interval >= 0)
err = -EINVAL;
- if (params.supported_rates)
- err = -EINVAL;
- if (params.sta_flags_mask)
+ if (params.sta_flags_mask &
+ ~(BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+ BIT(NL80211_STA_FLAG_MFP) |
+ BIT(NL80211_STA_FLAG_AUTHORIZED)))
err = -EINVAL;
break;
default:
@@ -2324,11 +2475,16 @@
params.ht_capa =
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
+ if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
+ params.plink_action =
+ nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
+
if (parse_station_flags(info, ¶ms))
return -EINVAL;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
return -EINVAL;
@@ -2804,8 +2960,10 @@
nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
- [NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE] = { .type = NLA_BINARY,
+ [NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
+ [NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
+ [NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG },
};
static int nl80211_parse_mesh_config(struct genl_info *info,
@@ -2906,14 +3064,17 @@
IEEE80211_PATH_METRIC_VENDOR :
IEEE80211_PATH_METRIC_AIRTIME;
- if (tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE]) {
+
+ if (tb[NL80211_MESH_SETUP_IE]) {
struct nlattr *ieattr =
- tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE];
+ tb[NL80211_MESH_SETUP_IE];
if (!is_valid_ie_attr(ieattr))
return -EINVAL;
- setup->vendor_ie = nla_data(ieattr);
- setup->vendor_ie_len = nla_len(ieattr);
+ setup->ie = nla_data(ieattr);
+ setup->ie_len = nla_len(ieattr);
}
+ setup->is_authenticated = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AUTH]);
+ setup->is_secure = nla_get_flag(tb[NL80211_MESH_SETUP_USERSPACE_AMPE]);
return 0;
}
@@ -3282,6 +3443,188 @@
return err;
}
+static int nl80211_start_sched_scan(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_sched_scan_request *request;
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct cfg80211_ssid *ssid;
+ struct ieee80211_channel *channel;
+ struct nlattr *attr;
+ struct wiphy *wiphy;
+ int err, tmp, n_ssids = 0, n_channels, i;
+ u32 interval;
+ enum ieee80211_band band;
+ size_t ie_len;
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
+ !rdev->ops->sched_scan_start)
+ return -EOPNOTSUPP;
+
+ if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+ return -EINVAL;
+
+ if (rdev->sched_scan_req)
+ return -EINPROGRESS;
+
+ if (!info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+ return -EINVAL;
+
+ interval = nla_get_u32(info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
+ if (interval == 0)
+ return -EINVAL;
+
+ wiphy = &rdev->wiphy;
+
+ if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+ n_channels = validate_scan_freqs(
+ info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
+ if (!n_channels)
+ return -EINVAL;
+ } else {
+ n_channels = 0;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+ if (wiphy->bands[band])
+ n_channels += wiphy->bands[band]->n_channels;
+ }
+
+ if (info->attrs[NL80211_ATTR_SCAN_SSIDS])
+ nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
+ tmp)
+ n_ssids++;
+
+ if (n_ssids > wiphy->max_scan_ssids)
+ return -EINVAL;
+
+ if (info->attrs[NL80211_ATTR_IE])
+ ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ else
+ ie_len = 0;
+
+ if (ie_len > wiphy->max_scan_ie_len)
+ return -EINVAL;
+
+ request = kzalloc(sizeof(*request)
+ + sizeof(*ssid) * n_ssids
+ + sizeof(channel) * n_channels
+ + ie_len, GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+
+ if (n_ssids)
+ request->ssids = (void *)&request->channels[n_channels];
+ request->n_ssids = n_ssids;
+ if (ie_len) {
+ if (request->ssids)
+ request->ie = (void *)(request->ssids + n_ssids);
+ else
+ request->ie = (void *)(request->channels + n_channels);
+ }
+
+ i = 0;
+ if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+ /* user specified, bail out if channel not found */
+ nla_for_each_nested(attr,
+ info->attrs[NL80211_ATTR_SCAN_FREQUENCIES],
+ tmp) {
+ struct ieee80211_channel *chan;
+
+ chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
+
+ if (!chan) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ /* ignore disabled channels */
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ request->channels[i] = chan;
+ i++;
+ }
+ } else {
+ /* all channels */
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ int j;
+ if (!wiphy->bands[band])
+ continue;
+ for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+ struct ieee80211_channel *chan;
+
+ chan = &wiphy->bands[band]->channels[j];
+
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ request->channels[i] = chan;
+ i++;
+ }
+ }
+ }
+
+ if (!i) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ request->n_channels = i;
+
+ i = 0;
+ if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
+ nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
+ tmp) {
+ if (request->ssids[i].ssid_len >
+ IEEE80211_MAX_SSID_LEN) {
+ err = -EINVAL;
+ goto out_free;
+ }
+ memcpy(request->ssids[i].ssid, nla_data(attr),
+ nla_len(attr));
+ request->ssids[i].ssid_len = nla_len(attr);
+ i++;
+ }
+ }
+
+ if (info->attrs[NL80211_ATTR_IE]) {
+ request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ memcpy((void *)request->ie,
+ nla_data(info->attrs[NL80211_ATTR_IE]),
+ request->ie_len);
+ }
+
+ request->dev = dev;
+ request->wiphy = &rdev->wiphy;
+ request->interval = interval;
+
+ err = rdev->ops->sched_scan_start(&rdev->wiphy, dev, request);
+ if (!err) {
+ rdev->sched_scan_req = request;
+ nl80211_send_sched_scan(rdev, dev,
+ NL80211_CMD_START_SCHED_SCAN);
+ goto out;
+ }
+
+out_free:
+ kfree(request);
+out:
+ return err;
+}
+
+static int nl80211_stop_sched_scan(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
+ !rdev->ops->sched_scan_stop)
+ return -EOPNOTSUPP;
+
+ return __cfg80211_stop_sched_scan(rdev, false);
+}
+
static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
@@ -4780,6 +5123,194 @@
return cfg80211_leave_mesh(rdev, dev);
}
+static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct sk_buff *msg;
+ void *hdr;
+
+ if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns)
+ return -EOPNOTSUPP;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+ NL80211_CMD_GET_WOWLAN);
+ if (!hdr)
+ goto nla_put_failure;
+
+ if (rdev->wowlan) {
+ struct nlattr *nl_wowlan;
+
+ nl_wowlan = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS);
+ if (!nl_wowlan)
+ goto nla_put_failure;
+
+ if (rdev->wowlan->any)
+ NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_ANY);
+ if (rdev->wowlan->disconnect)
+ NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_DISCONNECT);
+ if (rdev->wowlan->magic_pkt)
+ NLA_PUT_FLAG(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT);
+ if (rdev->wowlan->n_patterns) {
+ struct nlattr *nl_pats, *nl_pat;
+ int i, pat_len;
+
+ nl_pats = nla_nest_start(msg,
+ NL80211_WOWLAN_TRIG_PKT_PATTERN);
+ if (!nl_pats)
+ goto nla_put_failure;
+
+ for (i = 0; i < rdev->wowlan->n_patterns; i++) {
+ nl_pat = nla_nest_start(msg, i + 1);
+ if (!nl_pat)
+ goto nla_put_failure;
+ pat_len = rdev->wowlan->patterns[i].pattern_len;
+ NLA_PUT(msg, NL80211_WOWLAN_PKTPAT_MASK,
+ DIV_ROUND_UP(pat_len, 8),
+ rdev->wowlan->patterns[i].mask);
+ NLA_PUT(msg, NL80211_WOWLAN_PKTPAT_PATTERN,
+ pat_len,
+ rdev->wowlan->patterns[i].pattern);
+ nla_nest_end(msg, nl_pat);
+ }
+ nla_nest_end(msg, nl_pats);
+ }
+
+ nla_nest_end(msg, nl_wowlan);
+ }
+
+ genlmsg_end(msg, hdr);
+ return genlmsg_reply(msg, info);
+
+nla_put_failure:
+ nlmsg_free(msg);
+ return -ENOBUFS;
+}
+
+static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct nlattr *tb[NUM_NL80211_WOWLAN_TRIG];
+ struct cfg80211_wowlan no_triggers = {};
+ struct cfg80211_wowlan new_triggers = {};
+ struct wiphy_wowlan_support *wowlan = &rdev->wiphy.wowlan;
+ int err, i;
+
+ if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS])
+ goto no_triggers;
+
+ err = nla_parse(tb, MAX_NL80211_WOWLAN_TRIG,
+ nla_data(info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]),
+ nla_len(info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]),
+ nl80211_wowlan_policy);
+ if (err)
+ return err;
+
+ if (tb[NL80211_WOWLAN_TRIG_ANY]) {
+ if (!(wowlan->flags & WIPHY_WOWLAN_ANY))
+ return -EINVAL;
+ new_triggers.any = true;
+ }
+
+ if (tb[NL80211_WOWLAN_TRIG_DISCONNECT]) {
+ if (!(wowlan->flags & WIPHY_WOWLAN_DISCONNECT))
+ return -EINVAL;
+ new_triggers.disconnect = true;
+ }
+
+ if (tb[NL80211_WOWLAN_TRIG_MAGIC_PKT]) {
+ if (!(wowlan->flags & WIPHY_WOWLAN_MAGIC_PKT))
+ return -EINVAL;
+ new_triggers.magic_pkt = true;
+ }
+
+ if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) {
+ struct nlattr *pat;
+ int n_patterns = 0;
+ int rem, pat_len, mask_len;
+ struct nlattr *pat_tb[NUM_NL80211_WOWLAN_PKTPAT];
+
+ nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
+ rem)
+ n_patterns++;
+ if (n_patterns > wowlan->n_patterns)
+ return -EINVAL;
+
+ new_triggers.patterns = kcalloc(n_patterns,
+ sizeof(new_triggers.patterns[0]),
+ GFP_KERNEL);
+ if (!new_triggers.patterns)
+ return -ENOMEM;
+
+ new_triggers.n_patterns = n_patterns;
+ i = 0;
+
+ nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN],
+ rem) {
+ nla_parse(pat_tb, MAX_NL80211_WOWLAN_PKTPAT,
+ nla_data(pat), nla_len(pat), NULL);
+ err = -EINVAL;
+ if (!pat_tb[NL80211_WOWLAN_PKTPAT_MASK] ||
+ !pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN])
+ goto error;
+ pat_len = nla_len(pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN]);
+ mask_len = DIV_ROUND_UP(pat_len, 8);
+ if (nla_len(pat_tb[NL80211_WOWLAN_PKTPAT_MASK]) !=
+ mask_len)
+ goto error;
+ if (pat_len > wowlan->pattern_max_len ||
+ pat_len < wowlan->pattern_min_len)
+ goto error;
+
+ new_triggers.patterns[i].mask =
+ kmalloc(mask_len + pat_len, GFP_KERNEL);
+ if (!new_triggers.patterns[i].mask) {
+ err = -ENOMEM;
+ goto error;
+ }
+ new_triggers.patterns[i].pattern =
+ new_triggers.patterns[i].mask + mask_len;
+ memcpy(new_triggers.patterns[i].mask,
+ nla_data(pat_tb[NL80211_WOWLAN_PKTPAT_MASK]),
+ mask_len);
+ new_triggers.patterns[i].pattern_len = pat_len;
+ memcpy(new_triggers.patterns[i].pattern,
+ nla_data(pat_tb[NL80211_WOWLAN_PKTPAT_PATTERN]),
+ pat_len);
+ i++;
+ }
+ }
+
+ if (memcmp(&new_triggers, &no_triggers, sizeof(new_triggers))) {
+ struct cfg80211_wowlan *ntrig;
+ ntrig = kmemdup(&new_triggers, sizeof(new_triggers),
+ GFP_KERNEL);
+ if (!ntrig) {
+ err = -ENOMEM;
+ goto error;
+ }
+ cfg80211_rdev_free_wowlan(rdev);
+ rdev->wowlan = ntrig;
+ } else {
+ no_triggers:
+ cfg80211_rdev_free_wowlan(rdev);
+ rdev->wowlan = NULL;
+ }
+
+ return 0;
+ error:
+ for (i = 0; i < new_triggers.n_patterns; i++)
+ kfree(new_triggers.patterns[i].mask);
+ kfree(new_triggers.patterns);
+ return err;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -5064,6 +5595,22 @@
.dumpit = nl80211_dump_scan,
},
{
+ .cmd = NL80211_CMD_START_SCHED_SCAN,
+ .doit = nl80211_start_sched_scan,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_STOP_SCHED_SCAN,
+ .doit = nl80211_stop_sched_scan,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
.cmd = NL80211_CMD_AUTHENTICATE,
.doit = nl80211_authenticate,
.policy = nl80211_policy,
@@ -5278,6 +5825,22 @@
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_GET_WOWLAN,
+ .doit = nl80211_get_wowlan,
+ .policy = nl80211_policy,
+ /* can be retrieved by unprivileged users */
+ .internal_flags = NL80211_FLAG_NEED_WIPHY |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_SET_WOWLAN,
+ .doit = nl80211_set_wowlan,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WIPHY |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
@@ -5373,6 +5936,28 @@
return -EMSGSIZE;
}
+static int
+nl80211_send_sched_scan_msg(struct sk_buff *msg,
+ struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ u32 pid, u32 seq, int flags, u32 cmd)
+{
+ void *hdr;
+
+ hdr = nl80211hdr_put(msg, pid, seq, flags, cmd);
+ if (!hdr)
+ return -1;
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+
+ return genlmsg_end(msg, hdr);
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
+}
+
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
struct net_device *netdev)
{
@@ -5430,6 +6015,43 @@
nl80211_scan_mcgrp.id, GFP_KERNEL);
}
+void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev)
+{
+ struct sk_buff *msg;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return;
+
+ if (nl80211_send_sched_scan_msg(msg, rdev, netdev, 0, 0, 0,
+ NL80211_CMD_SCHED_SCAN_RESULTS) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
+void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u32 cmd)
+{
+ struct sk_buff *msg;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg)
+ return;
+
+ if (nl80211_send_sched_scan_msg(msg, rdev, netdev, 0, 0, 0, cmd) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
/*
* This can happen on global regulatory changes or device specific settings
* based on custom world regulatory domains.
@@ -5785,6 +6407,44 @@
nlmsg_free(msg);
}
+void nl80211_send_new_peer_candidate(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *macaddr, const u8* ie, u8 ie_len,
+ gfp_t gfp)
+{
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NEW_PEER_CANDIDATE);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+ NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, macaddr);
+ if (ie_len && ie)
+ NLA_PUT(msg, NL80211_ATTR_IE, ie_len , ie);
+
+ if (genlmsg_end(msg, hdr) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+}
+
void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type, int key_id,
@@ -5966,6 +6626,40 @@
nl80211_mlme_mcgrp.id, gfp);
}
+void nl80211_send_sta_del_event(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *mac_addr,
+ gfp_t gfp)
+{
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_DEL_STATION);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+ NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
+
+ if (genlmsg_end(msg, hdr) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+}
+
int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 nlpid,
int freq, const u8 *buf, size_t len, gfp_t gfp)
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index e3f7fa8..2f1bfb8 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -12,6 +12,10 @@
struct net_device *netdev);
void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
struct net_device *netdev);
+void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u32 cmd);
+void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev);
void nl80211_send_reg_change_event(struct regulatory_request *request);
void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
@@ -50,6 +54,10 @@
struct net_device *netdev, u16 reason,
const u8 *ie, size_t ie_len, bool from_ap);
+void nl80211_send_new_peer_candidate(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *macaddr, const u8* ie, u8 ie_len,
+ gfp_t gfp);
void
nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
@@ -79,6 +87,9 @@
void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
+void nl80211_send_sta_del_event(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *mac_addr,
+ gfp_t gfp);
int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 nlpid, int freq,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index ab801a1..1ad0f39 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -106,6 +106,9 @@
static void reg_todo(struct work_struct *work);
static DECLARE_WORK(reg_work, reg_todo);
+static void reg_timeout_work(struct work_struct *work);
+static DECLARE_DELAYED_WORK(reg_timeout, reg_timeout_work);
+
/* We keep a static world regulatory domain in case of the absence of CRDA */
static const struct ieee80211_regdomain world_regdom = {
.n_reg_rules = 5,
@@ -669,11 +672,9 @@
for (i = 0; i < regd->n_reg_rules; i++) {
const struct ieee80211_reg_rule *rr;
const struct ieee80211_freq_range *fr = NULL;
- const struct ieee80211_power_rule *pr = NULL;
rr = ®d->reg_rules[i];
fr = &rr->freq_range;
- pr = &rr->power_rule;
/*
* We only need to know if one frequency rule was
@@ -1330,6 +1331,9 @@
need_more_processing = true;
spin_unlock(®_requests_lock);
+ if (last_request->initiator == NL80211_REGDOM_SET_BY_USER)
+ cancel_delayed_work_sync(®_timeout);
+
if (need_more_processing)
schedule_work(®_work);
}
@@ -1440,8 +1444,18 @@
r = __regulatory_hint(wiphy, reg_request);
/* This is required so that the orig_* parameters are saved */
if (r == -EALREADY && wiphy &&
- wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
+ wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) {
wiphy_update_regulatory(wiphy, initiator);
+ return;
+ }
+
+ /*
+ * We only time out user hints, given that they should be the only
+ * source of bogus requests.
+ */
+ if (r != -EALREADY &&
+ reg_request->initiator == NL80211_REGDOM_SET_BY_USER)
+ schedule_delayed_work(®_timeout, msecs_to_jiffies(3142));
}
/*
@@ -1744,6 +1758,8 @@
{
char alpha2[2];
struct reg_beacon *reg_beacon, *btmp;
+ struct regulatory_request *reg_request, *tmp;
+ LIST_HEAD(tmp_reg_req_list);
mutex_lock(&cfg80211_mutex);
mutex_lock(®_mutex);
@@ -1751,6 +1767,25 @@
reset_regdomains();
restore_alpha2(alpha2, reset_user);
+ /*
+ * If there's any pending requests we simply
+ * stash them to a temporary pending queue and
+ * add then after we've restored regulatory
+ * settings.
+ */
+ spin_lock(®_requests_lock);
+ if (!list_empty(®_requests_list)) {
+ list_for_each_entry_safe(reg_request, tmp,
+ ®_requests_list, list) {
+ if (reg_request->initiator !=
+ NL80211_REGDOM_SET_BY_USER)
+ continue;
+ list_del(®_request->list);
+ list_add_tail(®_request->list, &tmp_reg_req_list);
+ }
+ }
+ spin_unlock(®_requests_lock);
+
/* Clear beacon hints */
spin_lock_bh(®_pending_beacons_lock);
if (!list_empty(®_pending_beacons)) {
@@ -1785,8 +1820,31 @@
*/
if (is_an_alpha2(alpha2))
regulatory_hint_user(user_alpha2);
-}
+ if (list_empty(&tmp_reg_req_list))
+ return;
+
+ mutex_lock(&cfg80211_mutex);
+ mutex_lock(®_mutex);
+
+ spin_lock(®_requests_lock);
+ list_for_each_entry_safe(reg_request, tmp, &tmp_reg_req_list, list) {
+ REG_DBG_PRINT("Adding request for country %c%c back "
+ "into the queue\n",
+ reg_request->alpha2[0],
+ reg_request->alpha2[1]);
+ list_del(®_request->list);
+ list_add_tail(®_request->list, ®_requests_list);
+ }
+ spin_unlock(®_requests_lock);
+
+ mutex_unlock(®_mutex);
+ mutex_unlock(&cfg80211_mutex);
+
+ REG_DBG_PRINT("Kicking the queue\n");
+
+ schedule_work(®_work);
+}
void regulatory_hint_disconnect(void)
{
@@ -2125,6 +2183,13 @@
mutex_unlock(®_mutex);
}
+static void reg_timeout_work(struct work_struct *work)
+{
+ REG_DBG_PRINT("Timeout while waiting for CRDA to reply, "
+ "restoring regulatory settings");
+ restore_regulatory_settings(true);
+}
+
int __init regulatory_init(void)
{
int err = 0;
@@ -2178,6 +2243,7 @@
struct reg_beacon *reg_beacon, *btmp;
cancel_work_sync(®_work);
+ cancel_delayed_work_sync(®_timeout);
mutex_lock(&cfg80211_mutex);
mutex_lock(®_mutex);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index fbf6f33..73a441d 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -93,6 +93,69 @@
}
EXPORT_SYMBOL(cfg80211_scan_done);
+void __cfg80211_sched_scan_results(struct work_struct *wk)
+{
+ struct cfg80211_registered_device *rdev;
+
+ rdev = container_of(wk, struct cfg80211_registered_device,
+ sched_scan_results_wk);
+
+ cfg80211_lock_rdev(rdev);
+
+ /* we don't have sched_scan_req anymore if the scan is stopping */
+ if (rdev->sched_scan_req)
+ nl80211_send_sched_scan_results(rdev,
+ rdev->sched_scan_req->dev);
+
+ cfg80211_unlock_rdev(rdev);
+}
+
+void cfg80211_sched_scan_results(struct wiphy *wiphy)
+{
+ /* ignore if we're not scanning */
+ if (wiphy_to_dev(wiphy)->sched_scan_req)
+ queue_work(cfg80211_wq,
+ &wiphy_to_dev(wiphy)->sched_scan_results_wk);
+}
+EXPORT_SYMBOL(cfg80211_sched_scan_results);
+
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ cfg80211_lock_rdev(rdev);
+ __cfg80211_stop_sched_scan(rdev, true);
+ cfg80211_unlock_rdev(rdev);
+}
+EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
+
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+ bool driver_initiated)
+{
+ int err;
+ struct net_device *dev;
+
+ ASSERT_RDEV_LOCK(rdev);
+
+ if (!rdev->sched_scan_req)
+ return 0;
+
+ dev = rdev->sched_scan_req->dev;
+
+ if (!driver_initiated) {
+ err = rdev->ops->sched_scan_stop(&rdev->wiphy, dev);
+ if (err)
+ return err;
+ }
+
+ nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED);
+
+ kfree(rdev->sched_scan_req);
+ rdev->sched_scan_req = NULL;
+
+ return err;
+}
+
static void bss_release(struct kref *ref)
{
struct cfg80211_internal_bss *bss;
@@ -210,7 +273,7 @@
{
const u8 *ie;
- if (!is_zero_ether_addr(a->bssid))
+ if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
return false;
ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -248,11 +311,7 @@
if (a->channel != b->channel)
return b->channel->center_freq - a->channel->center_freq;
- r = memcmp(a->bssid, b->bssid, ETH_ALEN);
- if (r)
- return r;
-
- if (is_zero_ether_addr(a->bssid)) {
+ if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
r = cmp_ies(WLAN_EID_MESH_ID,
a->information_elements,
a->len_information_elements,
@@ -267,6 +326,10 @@
b->len_information_elements);
}
+ r = memcmp(a->bssid, b->bssid, ETH_ALEN);
+ if (r)
+ return r;
+
return cmp_ies(WLAN_EID_SSID,
a->information_elements,
a->len_information_elements,
@@ -407,7 +470,7 @@
res->ts = jiffies;
- if (is_zero_ether_addr(res->pub.bssid)) {
+ if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
/* must be mesh, verify */
meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
res->pub.information_elements,
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index 4294fa2..c6e4ca6 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -93,7 +93,7 @@
if (rdev->ops->suspend) {
rtnl_lock();
- ret = rdev->ops->suspend(&rdev->wiphy);
+ ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan);
rtnl_unlock();
}
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6a750bc..f0536d4 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -544,7 +544,8 @@
void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
const u8 *addr, enum nl80211_iftype iftype,
- const unsigned int extra_headroom)
+ const unsigned int extra_headroom,
+ bool has_80211_header)
{
struct sk_buff *frame = NULL;
u16 ethertype;
@@ -553,14 +554,18 @@
int remaining, err;
u8 dst[ETH_ALEN], src[ETH_ALEN];
- err = ieee80211_data_to_8023(skb, addr, iftype);
- if (err)
- goto out;
+ if (has_80211_header) {
+ err = ieee80211_data_to_8023(skb, addr, iftype);
+ if (err)
+ goto out;
- /* skip the wrapping header */
- eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
- if (!eth)
- goto out;
+ /* skip the wrapping header */
+ eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
+ if (!eth)
+ goto out;
+ } else {
+ eth = (struct ethhdr *) skb->data;
+ }
while (skb != frame) {
u8 padding;
@@ -803,6 +808,11 @@
return -EBUSY;
if (ntype != otype) {
+ err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
+ ntype);
+ if (err)
+ return err;
+
dev->ieee80211_ptr->use_4addr = false;
dev->ieee80211_ptr->mesh_id_up_len = 0;
@@ -896,3 +906,103 @@
/* do NOT round down here */
return (bitrate + 50000) / 100000;
}
+
+int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
+ u32 beacon_int)
+{
+ struct wireless_dev *wdev;
+ int res = 0;
+
+ if (!beacon_int)
+ return -EINVAL;
+
+ mutex_lock(&rdev->devlist_mtx);
+
+ list_for_each_entry(wdev, &rdev->netdev_list, list) {
+ if (!wdev->beacon_interval)
+ continue;
+ if (wdev->beacon_interval != beacon_int) {
+ res = -EINVAL;
+ break;
+ }
+ }
+
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return res;
+}
+
+int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev,
+ enum nl80211_iftype iftype)
+{
+ struct wireless_dev *wdev_iter;
+ int num[NUM_NL80211_IFTYPES];
+ int total = 1;
+ int i, j;
+
+ ASSERT_RTNL();
+
+ /* Always allow software iftypes */
+ if (rdev->wiphy.software_iftypes & BIT(iftype))
+ return 0;
+
+ /*
+ * Drivers will gradually all set this flag, until all
+ * have it we only enforce for those that set it.
+ */
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_ENFORCE_COMBINATIONS))
+ return 0;
+
+ memset(num, 0, sizeof(num));
+
+ num[iftype] = 1;
+
+ mutex_lock(&rdev->devlist_mtx);
+ list_for_each_entry(wdev_iter, &rdev->netdev_list, list) {
+ if (wdev_iter == wdev)
+ continue;
+ if (!netif_running(wdev_iter->netdev))
+ continue;
+
+ if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
+ continue;
+
+ num[wdev_iter->iftype]++;
+ total++;
+ }
+ mutex_unlock(&rdev->devlist_mtx);
+
+ for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
+ const struct ieee80211_iface_combination *c;
+ struct ieee80211_iface_limit *limits;
+
+ c = &rdev->wiphy.iface_combinations[i];
+
+ limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
+ GFP_KERNEL);
+ if (!limits)
+ return -ENOMEM;
+ if (total > c->max_interfaces)
+ goto cont;
+
+ for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
+ if (rdev->wiphy.software_iftypes & BIT(iftype))
+ continue;
+ for (j = 0; j < c->n_limits; j++) {
+ if (!(limits[j].types & iftype))
+ continue;
+ if (limits[j].max < num[iftype])
+ goto cont;
+ limits[j].max -= num[iftype];
+ }
+ }
+ /* yay, it fits */
+ kfree(limits);
+ return 0;
+ cont:
+ kfree(limits);
+ }
+
+ return -EBUSY;
+}
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 15792d8..9bec2e8 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1348,7 +1348,8 @@
default:
BUG();
}
- xdst = dst_alloc(dst_ops, 0);
+ xdst = dst_alloc(dst_ops, NULL, 0, 0, 0);
+ memset(&xdst->u.rt6.rt6i_table, 0, sizeof(*xdst) - sizeof(struct dst_entry));
xfrm_policy_put_afinfo(afinfo);
if (likely(xdst))
@@ -1406,6 +1407,7 @@
struct net *net = xp_net(policy);
unsigned long now = jiffies;
struct net_device *dev;
+ struct xfrm_mode *inner_mode;
struct dst_entry *dst_prev = NULL;
struct dst_entry *dst0 = NULL;
int i = 0;
@@ -1436,6 +1438,17 @@
goto put_states;
}
+ if (xfrm[i]->sel.family == AF_UNSPEC) {
+ inner_mode = xfrm_ip2inner_mode(xfrm[i],
+ xfrm_af2proto(family));
+ if (!inner_mode) {
+ err = -EAFNOSUPPORT;
+ dst_release(dst);
+ goto put_states;
+ }
+ } else
+ inner_mode = xfrm[i]->inner_mode;
+
if (!dst_prev)
dst0 = dst1;
else {
@@ -1464,7 +1477,7 @@
dst1->lastuse = now;
dst1->input = dst_discard;
- dst1->output = xfrm[i]->outer_mode->afinfo->output;
+ dst1->output = inner_mode->afinfo->output;
dst1->next = dst_prev;
dst_prev = dst1;
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index f218385..47f1b86 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -532,9 +532,12 @@
if (replay_esn) {
if (replay_esn->replay_window >
- replay_esn->bmp_len * sizeof(__u32))
+ replay_esn->bmp_len * sizeof(__u32) * 8)
return -EINVAL;
+ if ((x->props.flags & XFRM_STATE_ESN) && replay_esn->replay_window == 0)
+ return -EINVAL;
+
if ((x->props.flags & XFRM_STATE_ESN) && x->replay_esn)
x->repl = &xfrm_replay_esn;
else
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index dd78536..d70f85e 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1036,15 +1036,15 @@
case AF_INET6:
ipv6_addr_copy((struct in6_addr *)x->sel.daddr.a6,
- (struct in6_addr *)daddr);
+ (const struct in6_addr *)daddr);
ipv6_addr_copy((struct in6_addr *)x->sel.saddr.a6,
- (struct in6_addr *)saddr);
+ (const struct in6_addr *)saddr);
x->sel.prefixlen_d = 128;
x->sel.prefixlen_s = 128;
ipv6_addr_copy((struct in6_addr *)x->props.saddr.a6,
- (struct in6_addr *)saddr);
+ (const struct in6_addr *)saddr);
ipv6_addr_copy((struct in6_addr *)x->id.daddr.a6,
- (struct in6_addr *)daddr);
+ (const struct in6_addr *)daddr);
break;
}
@@ -2092,8 +2092,8 @@
static void xfrm_audit_helper_pktinfo(struct sk_buff *skb, u16 family,
struct audit_buffer *audit_buf)
{
- struct iphdr *iph4;
- struct ipv6hdr *iph6;
+ const struct iphdr *iph4;
+ const struct ipv6hdr *iph6;
switch (family) {
case AF_INET:
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 5d1d60d..c658cb3 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -124,6 +124,9 @@
{
struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL];
+ if ((p->flags & XFRM_STATE_ESN) && !rt)
+ return -EINVAL;
+
if (!rt)
return 0;
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index d5f925a..6165622 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -244,14 +244,19 @@
ifdef CONFIG_FTRACE_MCOUNT_RECORD
ifdef BUILD_C_RECORDMCOUNT
+ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
+ RECORDMCOUNT_FLAGS = -w
+endif
# Due to recursion, we must skip empty.o.
# The empty.o file is created in the make process in order to determine
# the target endianness and word size. It is made before all other C
# files, including recordmcount.
sub_cmd_record_mcount = \
if [ $(@) != "scripts/mod/empty.o" ]; then \
- $(objtree)/scripts/recordmcount "$(@)"; \
+ $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
fi;
+recordmcount_source := $(srctree)/scripts/recordmcount.c \
+ $(srctree)/scripts/recordmcount.h
else
sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
@@ -259,6 +264,7 @@
"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
"$(if $(part-of-module),1,0)" "$(@)";
+recordmcount_source := $(srctree)/scripts/recordmcount.pl
endif
cmd_record_mcount = \
if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then \
@@ -279,13 +285,13 @@
endef
# Built-in and composite module parts
-$(obj)/%.o: $(src)/%.c FORCE
+$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
# Single-part modules are special since we need to mark them in $(MODVERDIR)
-$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
+$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 88f3f07..e26e2fb 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -702,6 +702,24 @@
return 1;
}
+/* Looks like: bcma:mNidNrevNclN. */
+static int do_bcma_entry(const char *filename,
+ struct bcma_device_id *id, char *alias)
+{
+ id->manuf = TO_NATIVE(id->manuf);
+ id->id = TO_NATIVE(id->id);
+ id->rev = TO_NATIVE(id->rev);
+ id->class = TO_NATIVE(id->class);
+
+ strcpy(alias, "bcma:");
+ ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
+ ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
+ ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
+ ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
+ add_wildcard(alias);
+ return 1;
+}
+
/* Looks like: virtio:dNvN */
static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
char *alias)
@@ -968,6 +986,10 @@
do_table(symval, sym->st_size,
sizeof(struct ssb_device_id), "ssb",
do_ssb_entry, mod);
+ else if (sym_is(symname, "__mod_bcma_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct bcma_device_id), "bcma",
+ do_bcma_entry, mod);
else if (sym_is(symname, "__mod_virtio_device_table"))
do_table(symval, sym->st_size,
sizeof(struct virtio_device_id), "virtio",
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index cd104af..413c536 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -420,11 +420,10 @@
return 0;
}
- if (hdr->e_shnum == 0) {
+ if (hdr->e_shnum == SHN_UNDEF) {
/*
* There are more than 64k sections,
* read count from .sh_size.
- * note: it doesn't need shndx2secindex()
*/
info->num_sections = TO_NATIVE(sechdrs[0].sh_size);
}
@@ -432,8 +431,7 @@
info->num_sections = hdr->e_shnum;
}
if (hdr->e_shstrndx == SHN_XINDEX) {
- info->secindex_strings =
- shndx2secindex(TO_NATIVE(sechdrs[0].sh_link));
+ info->secindex_strings = TO_NATIVE(sechdrs[0].sh_link);
}
else {
info->secindex_strings = hdr->e_shstrndx;
@@ -489,7 +487,7 @@
sechdrs[i].sh_offset;
info->symtab_stop = (void *)hdr +
sechdrs[i].sh_offset + sechdrs[i].sh_size;
- sh_link_idx = shndx2secindex(sechdrs[i].sh_link);
+ sh_link_idx = sechdrs[i].sh_link;
info->strtab = (void *)hdr +
sechdrs[sh_link_idx].sh_offset;
}
@@ -516,11 +514,9 @@
if (symtab_shndx_idx != ~0U) {
Elf32_Word *p;
- if (symtab_idx !=
- shndx2secindex(sechdrs[symtab_shndx_idx].sh_link))
+ if (symtab_idx != sechdrs[symtab_shndx_idx].sh_link)
fatal("%s: SYMTAB_SHNDX has bad sh_link: %u!=%u\n",
- filename,
- shndx2secindex(sechdrs[symtab_shndx_idx].sh_link),
+ filename, sechdrs[symtab_shndx_idx].sh_link,
symtab_idx);
/* Fix endianness */
for (p = info->symtab_shndx_start; p < info->symtab_shndx_stop;
@@ -1446,7 +1442,7 @@
Elf_Shdr *sechdr, Elf_Rela *r)
{
Elf_Shdr *sechdrs = elf->sechdrs;
- int section = shndx2secindex(sechdr->sh_info);
+ int section = sechdr->sh_info;
return (void *)elf->hdr + sechdrs[section].sh_offset +
r->r_offset;
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 0388cfcc..2031119 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -145,33 +145,22 @@
return i != SHN_XINDEX && i >= SHN_LORESERVE && i <= SHN_HIRESERVE;
}
-/* shndx is in [0..SHN_LORESERVE) U (SHN_HIRESERVE, 0xfffffff], thus:
- * shndx == 0 <=> sechdrs[0]
- * ......
- * shndx == SHN_LORESERVE-1 <=> sechdrs[SHN_LORESERVE-1]
- * shndx == SHN_HIRESERVE+1 <=> sechdrs[SHN_LORESERVE]
- * shndx == SHN_HIRESERVE+2 <=> sechdrs[SHN_LORESERVE+1]
- * ......
- * fyi: sym->st_shndx is uint16, SHN_LORESERVE = ff00, SHN_HIRESERVE = ffff,
- * so basically we map 0000..feff -> 0000..feff
- * ff00..ffff -> (you are a bad boy, dont do it)
- * 10000..xxxx -> ff00..(xxxx-0x100)
+/*
+ * Move reserved section indices SHN_LORESERVE..SHN_HIRESERVE out of
+ * the way to -256..-1, to avoid conflicting with real section
+ * indices.
*/
-static inline unsigned int shndx2secindex(unsigned int i)
-{
- if (i <= SHN_HIRESERVE)
- return i;
- return i - (SHN_HIRESERVE + 1 - SHN_LORESERVE);
-}
+#define SPECIAL(i) ((i) - (SHN_HIRESERVE + 1))
/* Accessor for sym->st_shndx, hides ugliness of "64k sections" */
static inline unsigned int get_secindex(const struct elf_info *info,
const Elf_Sym *sym)
{
+ if (is_shndx_special(sym->st_shndx))
+ return SPECIAL(sym->st_shndx);
if (sym->st_shndx != SHN_XINDEX)
return sym->st_shndx;
- return shndx2secindex(info->symtab_shndx_start[sym -
- info->symtab_start]);
+ return info->symtab_shndx_start[sym - info->symtab_start];
}
/* file2alias.c */
diff --git a/scripts/module-common.lds b/scripts/module-common.lds
index 47a1f9a..0865b3e 100644
--- a/scripts/module-common.lds
+++ b/scripts/module-common.lds
@@ -5,4 +5,15 @@
*/
SECTIONS {
/DISCARD/ : { *(.discard) }
+
+ __ksymtab : { *(SORT(___ksymtab+*)) }
+ __ksymtab_gpl : { *(SORT(___ksymtab_gpl+*)) }
+ __ksymtab_unused : { *(SORT(___ksymtab_unused+*)) }
+ __ksymtab_unused_gpl : { *(SORT(___ksymtab_unused_gpl+*)) }
+ __ksymtab_gpl_future : { *(SORT(___ksymtab_gpl_future+*)) }
+ __kcrctab : { *(SORT(___kcrctab+*)) }
+ __kcrctab_gpl : { *(SORT(___kcrctab_gpl+*)) }
+ __kcrctab_unused : { *(SORT(___kcrctab_unused+*)) }
+ __kcrctab_unused_gpl : { *(SORT(___kcrctab_unused_gpl+*)) }
+ __kcrctab_gpl_future : { *(SORT(___kcrctab_gpl_future+*)) }
}
diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c
index f9f6f52..ee52cb8 100644
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -24,6 +24,7 @@
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
+#include <getopt.h>
#include <elf.h>
#include <fcntl.h>
#include <setjmp.h>
@@ -39,6 +40,7 @@
static struct stat sb; /* Remember .st_size, etc. */
static jmp_buf jmpenv; /* setjmp/longjmp per-file error escape */
static const char *altmcount; /* alternate mcount symbol name */
+static int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
/* setjmp() return values */
enum {
@@ -78,7 +80,7 @@
ulseek(int const fd, off_t const offset, int const whence)
{
off_t const w = lseek(fd, offset, whence);
- if ((off_t)-1 == w) {
+ if (w == (off_t)-1) {
perror("lseek");
fail_file();
}
@@ -111,13 +113,41 @@
umalloc(size_t size)
{
void *const addr = malloc(size);
- if (0 == addr) {
+ if (addr == 0) {
fprintf(stderr, "malloc failed: %zu bytes\n", size);
fail_file();
}
return addr;
}
+static unsigned char ideal_nop5_x86_64[5] = { 0x0f, 0x1f, 0x44, 0x00, 0x00 };
+static unsigned char ideal_nop5_x86_32[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
+static unsigned char *ideal_nop;
+
+static char rel_type_nop;
+
+static int (*make_nop)(void *map, size_t const offset);
+
+static int make_nop_x86(void *map, size_t const offset)
+{
+ uint32_t *ptr;
+ unsigned char *op;
+
+ /* Confirm we have 0xe8 0x0 0x0 0x0 0x0 */
+ ptr = map + offset;
+ if (*ptr != 0)
+ return -1;
+
+ op = map + offset - 1;
+ if (*op != 0xe8)
+ return -1;
+
+ /* convert to nop */
+ ulseek(fd_map, offset - 1, SEEK_SET);
+ uwrite(fd_map, ideal_nop, 5);
+ return 0;
+}
+
/*
* Get the whole file as a programming convenience in order to avoid
* malloc+lseek+read+free of many pieces. If successful, then mmap
@@ -136,7 +166,7 @@
void *addr;
fd_map = open(fname, O_RDWR);
- if (0 > fd_map || 0 > fstat(fd_map, &sb)) {
+ if (fd_map < 0 || fstat(fd_map, &sb) < 0) {
perror(fname);
fail_file();
}
@@ -147,7 +177,7 @@
addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
fd_map, 0);
mmap_failed = 0;
- if (MAP_FAILED == addr) {
+ if (addr == MAP_FAILED) {
mmap_failed = 1;
addr = umalloc(sb.st_size);
uread(fd_map, addr, sb.st_size);
@@ -206,12 +236,13 @@
static int
is_mcounted_section_name(char const *const txtname)
{
- return 0 == strcmp(".text", txtname) ||
- 0 == strcmp(".ref.text", txtname) ||
- 0 == strcmp(".sched.text", txtname) ||
- 0 == strcmp(".spinlock.text", txtname) ||
- 0 == strcmp(".irqentry.text", txtname) ||
- 0 == strcmp(".text.unlikely", txtname);
+ return strcmp(".text", txtname) == 0 ||
+ strcmp(".ref.text", txtname) == 0 ||
+ strcmp(".sched.text", txtname) == 0 ||
+ strcmp(".spinlock.text", txtname) == 0 ||
+ strcmp(".irqentry.text", txtname) == 0 ||
+ strcmp(".kprobes.text", txtname) == 0 ||
+ strcmp(".text.unlikely", txtname) == 0;
}
/* 32 bit and 64 bit are very similar */
@@ -264,43 +295,48 @@
w8 = w8nat;
switch (ehdr->e_ident[EI_DATA]) {
static unsigned int const endian = 1;
- default: {
+ default:
fprintf(stderr, "unrecognized ELF data encoding %d: %s\n",
ehdr->e_ident[EI_DATA], fname);
fail_file();
- } break;
- case ELFDATA2LSB: {
- if (1 != *(unsigned char const *)&endian) {
+ break;
+ case ELFDATA2LSB:
+ if (*(unsigned char const *)&endian != 1) {
/* main() is big endian, file.o is little endian. */
w = w4rev;
w2 = w2rev;
w8 = w8rev;
}
- } break;
- case ELFDATA2MSB: {
- if (0 != *(unsigned char const *)&endian) {
+ break;
+ case ELFDATA2MSB:
+ if (*(unsigned char const *)&endian != 0) {
/* main() is little endian, file.o is big endian. */
w = w4rev;
w2 = w2rev;
w8 = w8rev;
}
- } break;
+ break;
} /* end switch */
- if (0 != memcmp(ELFMAG, ehdr->e_ident, SELFMAG)
- || ET_REL != w2(ehdr->e_type)
- || EV_CURRENT != ehdr->e_ident[EI_VERSION]) {
+ if (memcmp(ELFMAG, ehdr->e_ident, SELFMAG) != 0
+ || w2(ehdr->e_type) != ET_REL
+ || ehdr->e_ident[EI_VERSION] != EV_CURRENT) {
fprintf(stderr, "unrecognized ET_REL file %s\n", fname);
fail_file();
}
gpfx = 0;
switch (w2(ehdr->e_machine)) {
- default: {
+ default:
fprintf(stderr, "unrecognized e_machine %d %s\n",
w2(ehdr->e_machine), fname);
fail_file();
- } break;
- case EM_386: reltype = R_386_32; break;
+ break;
+ case EM_386:
+ reltype = R_386_32;
+ make_nop = make_nop_x86;
+ ideal_nop = ideal_nop5_x86_32;
+ mcount_adjust_32 = -1;
+ break;
case EM_ARM: reltype = R_ARM_ABS32;
altmcount = "__gnu_mcount_nc";
break;
@@ -311,67 +347,91 @@
case EM_S390: /* reltype: e_class */ gpfx = '_'; break;
case EM_SH: reltype = R_SH_DIR32; break;
case EM_SPARCV9: reltype = R_SPARC_64; gpfx = '_'; break;
- case EM_X86_64: reltype = R_X86_64_64; break;
+ case EM_X86_64:
+ make_nop = make_nop_x86;
+ ideal_nop = ideal_nop5_x86_64;
+ reltype = R_X86_64_64;
+ mcount_adjust_64 = -1;
+ break;
} /* end switch */
switch (ehdr->e_ident[EI_CLASS]) {
- default: {
+ default:
fprintf(stderr, "unrecognized ELF class %d %s\n",
ehdr->e_ident[EI_CLASS], fname);
fail_file();
- } break;
- case ELFCLASS32: {
- if (sizeof(Elf32_Ehdr) != w2(ehdr->e_ehsize)
- || sizeof(Elf32_Shdr) != w2(ehdr->e_shentsize)) {
+ break;
+ case ELFCLASS32:
+ if (w2(ehdr->e_ehsize) != sizeof(Elf32_Ehdr)
+ || w2(ehdr->e_shentsize) != sizeof(Elf32_Shdr)) {
fprintf(stderr,
"unrecognized ET_REL file: %s\n", fname);
fail_file();
}
- if (EM_S390 == w2(ehdr->e_machine))
+ if (w2(ehdr->e_machine) == EM_S390) {
reltype = R_390_32;
- if (EM_MIPS == w2(ehdr->e_machine)) {
+ mcount_adjust_32 = -4;
+ }
+ if (w2(ehdr->e_machine) == EM_MIPS) {
reltype = R_MIPS_32;
is_fake_mcount32 = MIPS32_is_fake_mcount;
}
do32(ehdr, fname, reltype);
- } break;
+ break;
case ELFCLASS64: {
Elf64_Ehdr *const ghdr = (Elf64_Ehdr *)ehdr;
- if (sizeof(Elf64_Ehdr) != w2(ghdr->e_ehsize)
- || sizeof(Elf64_Shdr) != w2(ghdr->e_shentsize)) {
+ if (w2(ghdr->e_ehsize) != sizeof(Elf64_Ehdr)
+ || w2(ghdr->e_shentsize) != sizeof(Elf64_Shdr)) {
fprintf(stderr,
"unrecognized ET_REL file: %s\n", fname);
fail_file();
}
- if (EM_S390 == w2(ghdr->e_machine))
+ if (w2(ghdr->e_machine) == EM_S390) {
reltype = R_390_64;
- if (EM_MIPS == w2(ghdr->e_machine)) {
+ mcount_adjust_64 = -8;
+ }
+ if (w2(ghdr->e_machine) == EM_MIPS) {
reltype = R_MIPS_64;
Elf64_r_sym = MIPS64_r_sym;
Elf64_r_info = MIPS64_r_info;
is_fake_mcount64 = MIPS64_is_fake_mcount;
}
do64(ghdr, fname, reltype);
- } break;
+ break;
+ }
} /* end switch */
cleanup();
}
int
-main(int argc, char const *argv[])
+main(int argc, char *argv[])
{
const char ftrace[] = "/ftrace.o";
int ftrace_size = sizeof(ftrace) - 1;
int n_error = 0; /* gcc-4.3.0 false positive complaint */
+ int c;
+ int i;
- if (argc <= 1) {
- fprintf(stderr, "usage: recordmcount file.o...\n");
+ while ((c = getopt(argc, argv, "w")) >= 0) {
+ switch (c) {
+ case 'w':
+ warn_on_notrace_sect = 1;
+ break;
+ default:
+ fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
+ return 0;
+ }
+ }
+
+ if ((argc - optind) < 1) {
+ fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
return 0;
}
/* Process each file in turn, allowing deep failure. */
- for (--argc, ++argv; 0 < argc; --argc, ++argv) {
+ for (i = optind; i < argc; i++) {
+ char *file = argv[i];
int const sjval = setjmp(jmpenv);
int len;
@@ -380,29 +440,29 @@
* function but does not call it. Since ftrace.o should
* not be traced anyway, we just skip it.
*/
- len = strlen(argv[0]);
+ len = strlen(file);
if (len >= ftrace_size &&
- strcmp(argv[0] + (len - ftrace_size), ftrace) == 0)
+ strcmp(file + (len - ftrace_size), ftrace) == 0)
continue;
switch (sjval) {
- default: {
- fprintf(stderr, "internal error: %s\n", argv[0]);
+ default:
+ fprintf(stderr, "internal error: %s\n", file);
exit(1);
- } break;
- case SJ_SETJMP: { /* normal sequence */
+ break;
+ case SJ_SETJMP: /* normal sequence */
/* Avoid problems if early cleanup() */
fd_map = -1;
ehdr_curr = NULL;
mmap_failed = 1;
- do_file(argv[0]);
- } break;
- case SJ_FAIL: { /* error in do_file or below */
+ do_file(file);
+ break;
+ case SJ_FAIL: /* error in do_file or below */
++n_error;
- } break;
- case SJ_SUCCEED: { /* premature success */
+ break;
+ case SJ_SUCCEED: /* premature success */
/* do nothing */
- } break;
+ break;
} /* end switch */
}
return !!n_error;
diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index baf187b..4be60364 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -22,11 +22,15 @@
#undef is_fake_mcount
#undef fn_is_fake_mcount
#undef MIPS_is_fake_mcount
+#undef mcount_adjust
#undef sift_rel_mcount
+#undef nop_mcount
#undef find_secsym_ndx
#undef __has_rel_mcount
#undef has_rel_mcount
#undef tot_relsize
+#undef get_mcountsym
+#undef get_sym_str_and_relp
#undef do_func
#undef Elf_Addr
#undef Elf_Ehdr
@@ -49,14 +53,18 @@
#ifdef RECORD_MCOUNT_64
# define append_func append64
# define sift_rel_mcount sift64_rel_mcount
+# define nop_mcount nop_mcount_64
# define find_secsym_ndx find64_secsym_ndx
# define __has_rel_mcount __has64_rel_mcount
# define has_rel_mcount has64_rel_mcount
# define tot_relsize tot64_relsize
+# define get_sym_str_and_relp get_sym_str_and_relp_64
# define do_func do64
+# define get_mcountsym get_mcountsym_64
# define is_fake_mcount is_fake_mcount64
# define fn_is_fake_mcount fn_is_fake_mcount64
# define MIPS_is_fake_mcount MIPS64_is_fake_mcount
+# define mcount_adjust mcount_adjust_64
# define Elf_Addr Elf64_Addr
# define Elf_Ehdr Elf64_Ehdr
# define Elf_Shdr Elf64_Shdr
@@ -77,14 +85,18 @@
#else
# define append_func append32
# define sift_rel_mcount sift32_rel_mcount
+# define nop_mcount nop_mcount_32
# define find_secsym_ndx find32_secsym_ndx
# define __has_rel_mcount __has32_rel_mcount
# define has_rel_mcount has32_rel_mcount
# define tot_relsize tot32_relsize
+# define get_sym_str_and_relp get_sym_str_and_relp_32
# define do_func do32
+# define get_mcountsym get_mcountsym_32
# define is_fake_mcount is_fake_mcount32
# define fn_is_fake_mcount fn_is_fake_mcount32
# define MIPS_is_fake_mcount MIPS32_is_fake_mcount
+# define mcount_adjust mcount_adjust_32
# define Elf_Addr Elf32_Addr
# define Elf_Ehdr Elf32_Ehdr
# define Elf_Shdr Elf32_Shdr
@@ -123,6 +135,8 @@
}
static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO;
+static int mcount_adjust = 0;
+
/*
* MIPS mcount long call has 2 _mcount symbols, only the position of the 1st
* _mcount symbol is needed for dynamic function tracer, with it, to disable
@@ -234,6 +248,49 @@
uwrite(fd_map, ehdr, sizeof(*ehdr));
}
+static unsigned get_mcountsym(Elf_Sym const *const sym0,
+ Elf_Rel const *relp,
+ char const *const str0)
+{
+ unsigned mcountsym = 0;
+
+ Elf_Sym const *const symp =
+ &sym0[Elf_r_sym(relp)];
+ char const *symname = &str0[w(symp->st_name)];
+ char const *mcount = gpfx == '_' ? "_mcount" : "mcount";
+
+ if (symname[0] == '.')
+ ++symname; /* ppc64 hack */
+ if (strcmp(mcount, symname) == 0 ||
+ (altmcount && strcmp(altmcount, symname) == 0))
+ mcountsym = Elf_r_sym(relp);
+
+ return mcountsym;
+}
+
+static void get_sym_str_and_relp(Elf_Shdr const *const relhdr,
+ Elf_Ehdr const *const ehdr,
+ Elf_Sym const **sym0,
+ char const **str0,
+ Elf_Rel const **relp)
+{
+ Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff)
+ + (void *)ehdr);
+ unsigned const symsec_sh_link = w(relhdr->sh_link);
+ Elf_Shdr const *const symsec = &shdr0[symsec_sh_link];
+ Elf_Shdr const *const strsec = &shdr0[w(symsec->sh_link)];
+ Elf_Rel const *const rel0 = (Elf_Rel const *)(_w(relhdr->sh_offset)
+ + (void *)ehdr);
+
+ *sym0 = (Elf_Sym const *)(_w(symsec->sh_offset)
+ + (void *)ehdr);
+
+ *str0 = (char const *)(_w(strsec->sh_offset)
+ + (void *)ehdr);
+
+ *relp = rel0;
+}
+
/*
* Look at the relocations in order to find the calls to mcount.
* Accumulate the section offsets that are found, and their relocation info,
@@ -250,47 +307,27 @@
{
uint_t *const mloc0 = mlocp;
Elf_Rel *mrelp = *mrelpp;
- Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff)
- + (void *)ehdr);
- unsigned const symsec_sh_link = w(relhdr->sh_link);
- Elf_Shdr const *const symsec = &shdr0[symsec_sh_link];
- Elf_Sym const *const sym0 = (Elf_Sym const *)(_w(symsec->sh_offset)
- + (void *)ehdr);
-
- Elf_Shdr const *const strsec = &shdr0[w(symsec->sh_link)];
- char const *const str0 = (char const *)(_w(strsec->sh_offset)
- + (void *)ehdr);
-
- Elf_Rel const *const rel0 = (Elf_Rel const *)(_w(relhdr->sh_offset)
- + (void *)ehdr);
+ Elf_Sym const *sym0;
+ char const *str0;
+ Elf_Rel const *relp;
unsigned rel_entsize = _w(relhdr->sh_entsize);
unsigned const nrel = _w(relhdr->sh_size) / rel_entsize;
- Elf_Rel const *relp = rel0;
-
unsigned mcountsym = 0;
unsigned t;
- for (t = nrel; t; --t) {
- if (!mcountsym) {
- Elf_Sym const *const symp =
- &sym0[Elf_r_sym(relp)];
- char const *symname = &str0[w(symp->st_name)];
- char const *mcount = '_' == gpfx ? "_mcount" : "mcount";
+ get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
- if ('.' == symname[0])
- ++symname; /* ppc64 hack */
- if (0 == strcmp(mcount, symname) ||
- (altmcount && 0 == strcmp(altmcount, symname)))
- mcountsym = Elf_r_sym(relp);
- }
+ for (t = nrel; t; --t) {
+ if (!mcountsym)
+ mcountsym = get_mcountsym(sym0, relp, str0);
if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) {
- uint_t const addend = _w(_w(relp->r_offset) - recval);
-
+ uint_t const addend =
+ _w(_w(relp->r_offset) - recval + mcount_adjust);
mrelp->r_offset = _w(offbase
+ ((void *)mlocp - (void *)mloc0));
Elf_r_info(mrelp, recsym, reltype);
- if (sizeof(Elf_Rela) == rel_entsize) {
+ if (rel_entsize == sizeof(Elf_Rela)) {
((Elf_Rela *)mrelp)->r_addend = addend;
*mlocp++ = 0;
} else
@@ -304,6 +341,63 @@
return mlocp;
}
+/*
+ * Read the relocation table again, but this time its called on sections
+ * that are not going to be traced. The mcount calls here will be converted
+ * into nops.
+ */
+static void nop_mcount(Elf_Shdr const *const relhdr,
+ Elf_Ehdr const *const ehdr,
+ const char *const txtname)
+{
+ Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff)
+ + (void *)ehdr);
+ Elf_Sym const *sym0;
+ char const *str0;
+ Elf_Rel const *relp;
+ Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
+ unsigned rel_entsize = _w(relhdr->sh_entsize);
+ unsigned const nrel = _w(relhdr->sh_size) / rel_entsize;
+ unsigned mcountsym = 0;
+ unsigned t;
+ int once = 0;
+
+ get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
+
+ for (t = nrel; t; --t) {
+ int ret = -1;
+
+ if (!mcountsym)
+ mcountsym = get_mcountsym(sym0, relp, str0);
+
+ if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) {
+ if (make_nop)
+ ret = make_nop((void *)ehdr, shdr->sh_offset + relp->r_offset);
+ if (warn_on_notrace_sect && !once) {
+ printf("Section %s has mcount callers being ignored\n",
+ txtname);
+ once = 1;
+ /* just warn? */
+ if (!make_nop)
+ return;
+ }
+ }
+
+ /*
+ * If we successfully removed the mcount, mark the relocation
+ * as a nop (don't do anything with it).
+ */
+ if (!ret) {
+ Elf_Rel rel;
+ rel = *(Elf_Rel *)relp;
+ Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
+ ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
+ uwrite(fd_map, &rel, sizeof(rel));
+ }
+ relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
+ }
+}
+
/*
* Find a symbol in the given section, to be used as the base for relocating
@@ -354,13 +448,13 @@
Elf_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)];
char const *const txtname = &shstrtab[w(txthdr->sh_name)];
- if (0 == strcmp("__mcount_loc", txtname)) {
+ if (strcmp("__mcount_loc", txtname) == 0) {
fprintf(stderr, "warning: __mcount_loc already exists: %s\n",
fname);
succeed_file();
}
- if (SHT_PROGBITS != w(txthdr->sh_type) ||
- !is_mcounted_section_name(txtname))
+ if (w(txthdr->sh_type) != SHT_PROGBITS ||
+ !(w(txthdr->sh_flags) & SHF_EXECINSTR))
return NULL;
return txtname;
}
@@ -370,7 +464,7 @@
char const *const shstrtab,
char const *const fname)
{
- if (SHT_REL != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type))
+ if (w(relhdr->sh_type) != SHT_REL && w(relhdr->sh_type) != SHT_RELA)
return NULL;
return __has_rel_mcount(relhdr, shdr0, shstrtab, fname);
}
@@ -383,9 +477,11 @@
{
unsigned totrelsz = 0;
Elf_Shdr const *shdrp = shdr0;
+ char const *txtname;
for (; nhdr; --nhdr, ++shdrp) {
- if (has_rel_mcount(shdrp, shdr0, shstrtab, fname))
+ txtname = has_rel_mcount(shdrp, shdr0, shstrtab, fname);
+ if (txtname && is_mcounted_section_name(txtname))
totrelsz += _w(shdrp->sh_size);
}
return totrelsz;
@@ -421,7 +517,7 @@
for (relhdr = shdr0, k = nhdr; k; --k, ++relhdr) {
char const *const txtname = has_rel_mcount(relhdr, shdr0,
shstrtab, fname);
- if (txtname) {
+ if (txtname && is_mcounted_section_name(txtname)) {
uint_t recval = 0;
unsigned const recsym = find_secsym_ndx(
w(relhdr->sh_info), txtname, &recval,
@@ -432,6 +528,12 @@
mlocp = sift_rel_mcount(mlocp,
(void *)mlocp - (void *)mloc0, &mrelp,
relhdr, ehdr, recsym, recval, reltype);
+ } else if (txtname && (warn_on_notrace_sect || make_nop)) {
+ /*
+ * This section is ignored by ftrace, but still
+ * has mcount calls. Convert them to nops now.
+ */
+ nop_mcount(relhdr, ehdr, txtname);
}
}
if (mloc0 != mlocp) {
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 4be0dee..858966a 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -134,6 +134,7 @@
".sched.text" => 1,
".spinlock.text" => 1,
".irqentry.text" => 1,
+ ".kprobes.text" => 1,
".text.unlikely" => 1,
);
@@ -222,6 +223,7 @@
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount([+-]0x[0-9a-zA-Z]+)?\$";
$type = ".quad";
$alignment = 8;
+ $mcount_adjust = -1;
# force flags for this arch
$ld .= " -m elf_x86_64";
@@ -231,6 +233,7 @@
} elsif ($arch eq "i386") {
$alignment = 4;
+ $mcount_adjust = -1;
# force flags for this arch
$ld .= " -m elf_i386";
@@ -240,12 +243,14 @@
} elsif ($arch eq "s390" && $bits == 32) {
$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
+ $mcount_adjust = -4;
$alignment = 4;
$ld .= " -m elf_s390";
$cc .= " -m31";
} elsif ($arch eq "s390" && $bits == 64) {
$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
+ $mcount_adjust = -8;
$alignment = 8;
$type = ".quad";
$ld .= " -m elf64_s390";
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index c6ca866..f66baf4 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -69,18 +69,6 @@
EXPORT_SYMBOL_GPL(user_instantiate);
/*
- * dispose of the old data from an updated user defined key
- */
-static void user_update_rcu_disposal(struct rcu_head *rcu)
-{
- struct user_key_payload *upayload;
-
- upayload = container_of(rcu, struct user_key_payload, rcu);
-
- kfree(upayload);
-}
-
-/*
* update a user defined key
* - the key's semaphore is write-locked
*/
@@ -114,7 +102,7 @@
key->expiry = 0;
}
- call_rcu(&zap->rcu, user_update_rcu_disposal);
+ kfree_rcu(zap, rcu);
error:
return ret;
@@ -145,7 +133,7 @@
if (upayload) {
rcu_assign_pointer(key->payload.data, NULL);
- call_rcu(&upayload->rcu, user_update_rcu_disposal);
+ kfree_rcu(upayload, rcu);
}
}
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 1d027e2..3d2715f 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -38,11 +38,7 @@
#define AVC_CACHE_RECLAIM 16
#ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
-#define avc_cache_stats_incr(field) \
-do { \
- per_cpu(avc_cache_stats, get_cpu()).field++; \
- put_cpu(); \
-} while (0)
+#define avc_cache_stats_incr(field) this_cpu_inc(avc_cache_stats.field)
#else
#define avc_cache_stats_incr(field) do {} while (0)
#endif
@@ -347,11 +343,10 @@
node = avc_search_node(ssid, tsid, tclass);
if (node)
- avc_cache_stats_incr(hits);
- else
- avc_cache_stats_incr(misses);
+ return node;
- return node;
+ avc_cache_stats_incr(misses);
+ return NULL;
}
static int avc_latest_notif_update(int seqno, int is_insert)
@@ -769,7 +764,7 @@
rcu_read_lock();
node = avc_lookup(ssid, tsid, tclass);
- if (!node) {
+ if (unlikely(!node)) {
rcu_read_unlock();
if (in_avd)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index f7cf0ea..8fb2488 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1578,7 +1578,8 @@
return rc;
if (!newsid || !(sbsec->flags & SE_SBLABELSUPP)) {
- rc = security_transition_sid(sid, dsec->sid, tclass, NULL, &newsid);
+ rc = security_transition_sid(sid, dsec->sid, tclass,
+ &dentry->d_name, &newsid);
if (rc)
return rc;
}
diff --git a/security/selinux/include/avc.h b/security/selinux/include/avc.h
index e77b2ac..47fda96 100644
--- a/security/selinux/include/avc.h
+++ b/security/selinux/include/avc.h
@@ -41,7 +41,6 @@
*/
struct avc_cache_stats {
unsigned int lookups;
- unsigned int hits;
unsigned int misses;
unsigned int allocations;
unsigned int reclaims;
diff --git a/security/selinux/netif.c b/security/selinux/netif.c
index d6095d6..58cc481 100644
--- a/security/selinux/netif.c
+++ b/security/selinux/netif.c
@@ -104,22 +104,6 @@
}
/**
- * sel_netif_free - Frees an interface entry
- * @p: the entry's RCU field
- *
- * Description:
- * This function is designed to be used as a callback to the call_rcu()
- * function so that memory allocated to a hash table interface entry can be
- * released safely.
- *
- */
-static void sel_netif_free(struct rcu_head *p)
-{
- struct sel_netif *netif = container_of(p, struct sel_netif, rcu_head);
- kfree(netif);
-}
-
-/**
* sel_netif_destroy - Remove an interface record from the table
* @netif: the existing interface record
*
@@ -131,7 +115,7 @@
{
list_del_rcu(&netif->list);
sel_netif_total--;
- call_rcu(&netif->rcu_head, sel_netif_free);
+ kfree_rcu(netif, rcu_head);
}
/**
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index ea39cb7..c0e1a0f 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1380,10 +1380,14 @@
if (v == SEQ_START_TOKEN)
seq_printf(seq, "lookups hits misses allocations reclaims "
"frees\n");
- else
- seq_printf(seq, "%u %u %u %u %u %u\n", st->lookups,
- st->hits, st->misses, st->allocations,
+ else {
+ unsigned int lookups = st->lookups;
+ unsigned int misses = st->misses;
+ unsigned int hits = lookups - misses;
+ seq_printf(seq, "%u %u %u %u %u %u\n", lookups,
+ hits, misses, st->allocations,
st->reclaims, st->frees);
+ }
return 0;
}
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index e7b850a..7102457 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -502,7 +502,7 @@
goto out;
rc = flex_array_prealloc(p->type_val_to_struct_array, 0,
- p->p_types.nprim - 1, GFP_KERNEL | __GFP_ZERO);
+ p->p_types.nprim, GFP_KERNEL | __GFP_ZERO);
if (rc)
goto out;
@@ -519,7 +519,7 @@
goto out;
rc = flex_array_prealloc(p->sym_val_to_name[i],
- 0, p->symtab[i].nprim - 1,
+ 0, p->symtab[i].nprim,
GFP_KERNEL | __GFP_ZERO);
if (rc)
goto out;
@@ -1819,8 +1819,6 @@
goto out;
nel = le32_to_cpu(buf[0]);
- printk(KERN_ERR "%s: nel=%d\n", __func__, nel);
-
last = p->filename_trans;
while (last && last->next)
last = last->next;
@@ -1857,8 +1855,6 @@
goto out;
name[len] = 0;
- printk(KERN_ERR "%s: ft=%p ft->name=%p ft->name=%s\n", __func__, ft, ft->name, ft->name);
-
rc = next_entry(buf, fp, sizeof(u32) * 4);
if (rc)
goto out;
@@ -2375,7 +2371,7 @@
goto bad;
/* preallocate so we don't have to worry about the put ever failing */
- rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim - 1,
+ rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim,
GFP_KERNEL | __GFP_ZERO);
if (rc)
goto bad;
diff --git a/sound/firewire/amdtp.c b/sound/firewire/amdtp.c
index b18140f..87657dd 100644
--- a/sound/firewire/amdtp.c
+++ b/sound/firewire/amdtp.c
@@ -396,6 +396,7 @@
for (i = 0; i < packets; ++i)
queue_out_packet(s, ++cycle);
+ fw_iso_context_queue_flush(s->context);
}
static int queue_initial_skip_packets(struct amdtp_out_stream *s)
diff --git a/sound/firewire/cmp.c b/sound/firewire/cmp.c
index 4a37f3a..14cacbc 100644
--- a/sound/firewire/cmp.c
+++ b/sound/firewire/cmp.c
@@ -49,10 +49,9 @@
enum bus_reset_handling bus_reset_handling)
{
struct fw_device *device = fw_parent_device(c->resources.unit);
- __be32 *buffer = c->resources.buffer;
int generation = c->resources.generation;
int rcode, errors = 0;
- __be32 old_arg;
+ __be32 old_arg, buffer[2];
int err;
buffer[0] = c->last_pcr_value;
diff --git a/sound/firewire/iso-resources.c b/sound/firewire/iso-resources.c
index 775dbd5..bb9c0c1 100644
--- a/sound/firewire/iso-resources.c
+++ b/sound/firewire/iso-resources.c
@@ -11,7 +11,6 @@
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include "iso-resources.h"
@@ -25,10 +24,6 @@
*/
int fw_iso_resources_init(struct fw_iso_resources *r, struct fw_unit *unit)
{
- r->buffer = kmalloc(2 * 4, GFP_KERNEL);
- if (!r->buffer)
- return -ENOMEM;
-
r->channels_mask = ~0uLL;
r->unit = fw_unit_get(unit);
mutex_init(&r->mutex);
@@ -44,7 +39,6 @@
void fw_iso_resources_destroy(struct fw_iso_resources *r)
{
WARN_ON(r->allocated);
- kfree(r->buffer);
mutex_destroy(&r->mutex);
fw_unit_put(r->unit);
}
@@ -131,7 +125,7 @@
bandwidth = r->bandwidth + r->bandwidth_overhead;
fw_iso_resource_manage(card, r->generation, r->channels_mask,
- &channel, &bandwidth, true, r->buffer);
+ &channel, &bandwidth, true);
if (channel == -EAGAIN) {
mutex_unlock(&r->mutex);
goto retry_after_bus_reset;
@@ -184,7 +178,7 @@
bandwidth = r->bandwidth + r->bandwidth_overhead;
fw_iso_resource_manage(card, r->generation, 1uLL << r->channel,
- &channel, &bandwidth, true, r->buffer);
+ &channel, &bandwidth, true);
/*
* When another bus reset happens, pretend that the allocation
* succeeded; we will try again for the new generation later.
@@ -220,7 +214,7 @@
if (r->allocated) {
bandwidth = r->bandwidth + r->bandwidth_overhead;
fw_iso_resource_manage(card, r->generation, 1uLL << r->channel,
- &channel, &bandwidth, false, r->buffer);
+ &channel, &bandwidth, false);
if (channel < 0)
dev_err(&r->unit->device,
"isochronous resource deallocation failed\n");
diff --git a/sound/firewire/iso-resources.h b/sound/firewire/iso-resources.h
index 3f0730e4..5a9af7c 100644
--- a/sound/firewire/iso-resources.h
+++ b/sound/firewire/iso-resources.h
@@ -24,7 +24,6 @@
unsigned int bandwidth_overhead;
int generation; /* in which allocation is valid */
bool allocated;
- __be32 *buffer;
};
int fw_iso_resources_init(struct fw_iso_resources *r,
diff --git a/sound/pci/au88x0/au88x0_pcm.c b/sound/pci/au88x0/au88x0_pcm.c
index 33f0ba5..62e9591 100644
--- a/sound/pci/au88x0/au88x0_pcm.c
+++ b/sound/pci/au88x0/au88x0_pcm.c
@@ -44,10 +44,10 @@
.channels_min = 1,
.channels_max = 2,
.buffer_bytes_max = 0x10000,
- .period_bytes_min = 0x1,
+ .period_bytes_min = 0x20,
.period_bytes_max = 0x1000,
.periods_min = 2,
- .periods_max = 32,
+ .periods_max = 1024,
};
#ifndef CHIP_AU8820
@@ -140,6 +140,9 @@
SNDRV_PCM_HW_PARAM_PERIOD_BYTES)) < 0)
return err;
+ snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 64);
+
if (VORTEX_PCM_TYPE(substream->pcm) != VORTEX_PCM_WT) {
#ifndef CHIP_AU8820
if (VORTEX_PCM_TYPE(substream->pcm) == VORTEX_PCM_A3D) {
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d3bd2c1..c82979a 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1704,11 +1704,11 @@
codec->chip_name, fix->type);
break;
}
- if (!fix[id].chained)
+ if (!fix->chained)
break;
if (++depth > 10)
break;
- id = fix[id].chain_id;
+ id = fix->chain_id;
}
}
@@ -5645,6 +5645,7 @@
static struct snd_pci_quirk beep_white_list[] = {
SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
SND_PCI_QUIRK(0x1043, 0x83ce, "EeePC", 1),
+ SND_PCI_QUIRK(0x1043, 0x831a, "EeePC", 1),
SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
{}
};
@@ -9863,6 +9864,7 @@
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG),
@@ -10699,7 +10701,6 @@
PINFIX_LENOVO_Y530,
PINFIX_PB_M5210,
PINFIX_ACER_ASPIRE_7736,
- PINFIX_GIGABYTE_880GM,
};
static const struct alc_fixup alc882_fixups[] = {
@@ -10731,13 +10732,6 @@
.type = ALC_FIXUP_SKU,
.v.sku = ALC_FIXUP_SKU_IGNORE,
},
- [PINFIX_GIGABYTE_880GM] = {
- .type = ALC_FIXUP_PINS,
- .v.pins = (const struct alc_pincfg[]) {
- { 0x14, 0x1114410 }, /* set as speaker */
- { }
- }
- },
};
static struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -10745,7 +10739,6 @@
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", PINFIX_ACER_ASPIRE_7736),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", PINFIX_GIGABYTE_880GM),
{}
};
@@ -18805,6 +18798,8 @@
ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
+ ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x152d, 0x2304, "Quanta WH1", ALC663_ASUS_H13),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
@@ -19478,7 +19473,7 @@
ALC662_FIXUP_IDEAPAD,
ALC272_FIXUP_MARIO,
ALC662_FIXUP_CZC_P10T,
- ALC662_FIXUP_GIGABYTE,
+ ALC662_FIXUP_SKU_IGNORE,
};
static const struct alc_fixup alc662_fixups[] = {
@@ -19507,20 +19502,17 @@
{}
}
},
- [ALC662_FIXUP_GIGABYTE] = {
- .type = ALC_FIXUP_PINS,
- .v.pins = (const struct alc_pincfg[]) {
- { 0x14, 0x1114410 }, /* set as speaker */
- { }
- }
+ [ALC662_FIXUP_SKU_IGNORE] = {
+ .type = ALC_FIXUP_SKU,
+ .v.sku = ALC_FIXUP_SKU_IGNORE,
},
};
static struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
+ SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", ALC662_FIXUP_GIGABYTE),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 1371b57c..0997031 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1292,14 +1292,18 @@
{
int i;
struct snd_ctl_elem_id id;
- const char *labels[] = {"Mic", "Front Mic", "Line"};
+ const char *labels[] = {"Mic", "Front Mic", "Line", "Rear Mic"};
+ struct snd_kcontrol *ctl;
memset(&id, 0, sizeof(id));
id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
for (i = 0; i < ARRAY_SIZE(labels); i++) {
sprintf(id.name, "%s Playback Volume", labels[i]);
- snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE,
- &id);
+ ctl = snd_hda_find_mixer_ctl(codec, id.name);
+ if (ctl)
+ snd_ctl_notify(codec->bus->card,
+ SNDRV_CTL_EVENT_MASK_VALUE,
+ &ctl->id);
}
}
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 2727bef..b04d280 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -139,7 +139,7 @@
SOC_DOUBLE_R("Capture Switch", SSM2602_LINVOL, SSM2602_RINVOL, 7, 1, 1),
SOC_SINGLE("Mic Boost (+20dB)", SSM2602_APANA, 0, 1, 0),
-SOC_SINGLE("Mic Boost2 (+20dB)", SSM2602_APANA, 7, 1, 0),
+SOC_SINGLE("Mic Boost2 (+20dB)", SSM2602_APANA, 8, 1, 0),
SOC_SINGLE("Mic Switch", SSM2602_APANA, 1, 1, 1),
SOC_SINGLE("Sidetone Playback Volume", SSM2602_APANA, 6, 3, 1),
@@ -602,7 +602,7 @@
.read = ssm2602_read_reg_cache,
.write = ssm2602_write,
.set_bias_level = ssm2602_set_bias_level,
- .reg_cache_size = sizeof(ssm2602_reg),
+ .reg_cache_size = ARRAY_SIZE(ssm2602_reg),
.reg_word_size = sizeof(u16),
.reg_cache_default = ssm2602_reg,
};
@@ -614,7 +614,7 @@
* low = 0x1a
* high = 0x1b
*/
-static int ssm2602_i2c_probe(struct i2c_client *i2c,
+static int __devinit ssm2602_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct ssm2602_priv *ssm2602;
@@ -635,7 +635,7 @@
return ret;
}
-static int ssm2602_i2c_remove(struct i2c_client *client)
+static int __devexit ssm2602_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
kfree(i2c_get_clientdata(client));
@@ -655,7 +655,7 @@
.owner = THIS_MODULE,
},
.probe = ssm2602_i2c_probe,
- .remove = ssm2602_i2c_remove,
+ .remove = __devexit_p(ssm2602_i2c_remove),
.id_table = ssm2602_i2c_id,
};
#endif
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 48ffd40..a7b8f30 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -601,9 +601,7 @@
.reg_cache_step = 1,
.read = uda134x_read_reg_cache,
.write = uda134x_write,
-#ifdef POWER_OFF_ON_STANDBY
.set_bias_level = uda134x_set_bias_level,
-#endif
};
static int __devinit uda134x_codec_probe(struct platform_device *pdev)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index f52b623..824d1c8 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -692,7 +692,7 @@
SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
- WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
+ WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
SOC_ENUM("ADC Companding Mode", adc_companding),
SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index a5af834..4ddc6d3 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -434,17 +434,21 @@
mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
- mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x7 << 26));
+ mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG,
+ ACLKX | AHCLKX | AFSX);
break;
case SND_SOC_DAIFMT_CBM_CFS:
/* codec is clock master and frame slave */
- mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
- mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
- mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x2d << 26));
+ mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG,
+ ACLKX | ACLKR);
+ mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG,
+ AFSX | AFSR);
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* codec is clock and frame master */
@@ -454,7 +458,8 @@
mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
- mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG, (0x3f << 26));
+ mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG,
+ ACLKX | AHCLKX | AFSX | ACLKR | AHCLKR | AFSR);
break;
default:
@@ -644,7 +649,7 @@
mcasp_set_reg(dev->base + DAVINCI_MCASP_TXTDM_REG, mask);
mcasp_set_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXORD);
- if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+ if ((dev->tdm_slots >= 2) && (dev->tdm_slots <= 32))
mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMCTL_REG,
FSXMOD(dev->tdm_slots), FSXMOD(0x1FF));
else
@@ -660,7 +665,7 @@
AHCLKRE);
mcasp_set_reg(dev->base + DAVINCI_MCASP_RXTDM_REG, mask);
- if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+ if ((dev->tdm_slots >= 2) && (dev->tdm_slots <= 32))
mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMCTL_REG,
FSRMOD(dev->tdm_slots), FSRMOD(0x1FF));
else
diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index 419bf4f..cd22a54 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -133,7 +133,7 @@
struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
uint32_t conf;
- if (!dai->active)
+ if (dai->active)
return;
conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
diff --git a/sound/soc/mid-x86/sst_platform.c b/sound/soc/mid-x86/sst_platform.c
index d567c32..6b1f9d3 100644
--- a/sound/soc/mid-x86/sst_platform.c
+++ b/sound/soc/mid-x86/sst_platform.c
@@ -376,6 +376,11 @@
return 0;
}
+static int sst_platform_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_lib_free_pages(substream);
+}
+
static struct snd_pcm_ops sst_platform_ops = {
.open = sst_platform_open,
.close = sst_platform_close,
@@ -384,6 +389,7 @@
.trigger = sst_platform_pcm_trigger,
.pointer = sst_platform_pcm_pointer,
.hw_params = sst_platform_pcm_hw_params,
+ .hw_free = sst_platform_pcm_hw_free,
};
static void sst_pcm_free(struct snd_pcm *pcm)
diff --git a/sound/soc/samsung/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c
index f6b3a3c..0e80dae 100644
--- a/sound/soc/samsung/goni_wm8994.c
+++ b/sound/soc/samsung/goni_wm8994.c
@@ -236,18 +236,18 @@
.name = "WM8994",
.stream_name = "WM8994 HiFi",
.cpu_dai_name = "samsung-i2s.0",
- .codec_dai_name = "wm8994-hifi",
+ .codec_dai_name = "wm8994-aif1",
.platform_name = "samsung-audio",
- .codec_name = "wm8994-codec.0-0x1a",
+ .codec_name = "wm8994-codec.0-001a",
.init = goni_wm8994_init,
.ops = &goni_hifi_ops,
}, {
.name = "WM8994 Voice",
.stream_name = "Voice",
.cpu_dai_name = "goni-voice-dai",
- .codec_dai_name = "wm8994-voice",
+ .codec_dai_name = "wm8994-aif2",
.platform_name = "samsung-audio",
- .codec_name = "wm8994-codec.0-0x1a",
+ .codec_name = "wm8994-codec.0-001a",
.ops = &goni_voice_ops,
},
};
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index d8562ce..dd55d10 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3291,6 +3291,8 @@
if (!card->name || !card->dev)
return -EINVAL;
+ dev_set_drvdata(card->dev, card);
+
snd_soc_initialize_card_lists(card);
soc_init_card_debugfs(card);
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 5b792d2..f079b5e 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -176,9 +176,11 @@
if (!rate)
continue;
/* C-Media CM6501 mislabels its 96 kHz altsetting */
+ /* Terratec Aureon 7.1 USB C-Media 6206, too */
if (rate == 48000 && nr_rates == 1 &&
(chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
- chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
+ chip->usb_id == USB_ID(0x0d8c, 0x0102) ||
+ chip->usb_id == USB_ID(0x0ccd, 0x00b1)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
/* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index ec07e62..1b94ec3 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -533,6 +533,7 @@
case USB_ID(0x0d8c, 0x0102):
/* C-Media CM6206 / CM106-Like Sound Device */
+ case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
return snd_usb_cm6206_boot_quirk(dev);
case USB_ID(0x133e, 0x0815):
diff --git a/tools/perf/Documentation/perf-script-perl.txt b/tools/perf/Documentation/perf-script-perl.txt
index 5bb41e5..3152cca 100644
--- a/tools/perf/Documentation/perf-script-perl.txt
+++ b/tools/perf/Documentation/perf-script-perl.txt
@@ -63,7 +63,6 @@
field:unsigned char common_flags;
field:unsigned char common_preempt_count;
field:int common_pid;
- field:int common_lock_depth;
field:char comm[TASK_COMM_LEN];
field:pid_t pid;
diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt
index 36b3827..4710220 100644
--- a/tools/perf/Documentation/perf-script-python.txt
+++ b/tools/perf/Documentation/perf-script-python.txt
@@ -463,7 +463,6 @@
field:unsigned char common_flags;
field:unsigned char common_preempt_count;
field:int common_pid;
- field:int common_lock_depth;
field:char comm[TASK_COMM_LEN];
field:pid_t pid;
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index 66f040b..86c87e2 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -113,13 +113,61 @@
Do various checks like samples ordering and lost events.
-f::
---fields
+--fields::
Comma separated list of fields to print. Options are:
comm, tid, pid, time, cpu, event, trace, sym. Field
- list must be prepended with the type, trace, sw or hw,
+ list can be prepended with the type, trace, sw or hw,
to indicate to which event type the field list applies.
e.g., -f sw:comm,tid,time,sym and -f trace:time,cpu,trace
+ perf script -f <fields>
+
+ is equivalent to:
+
+ perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
+
+ i.e., the specified fields apply to all event types if the type string
+ is not given.
+
+ The arguments are processed in the order received. A later usage can
+ reset a prior request. e.g.:
+
+ -f trace: -f comm,tid,time,sym
+
+ The first -f suppresses trace events (field list is ""), but then the
+ second invocation sets the fields to comm,tid,time,sym. In this case a
+ warning is given to the user:
+
+ "Overriding previous field request for all events."
+
+ Alternativey, consider the order:
+
+ -f comm,tid,time,sym -f trace:
+
+ The first -f sets the fields for all events and the second -f
+ suppresses trace events. The user is given a warning message about
+ the override, and the result of the above is that only S/W and H/W
+ events are displayed with the given fields.
+
+ For the 'wildcard' option if a user selected field is invalid for an
+ event type, a message is displayed to the user that the option is
+ ignored for that type. For example:
+
+ $ perf script -f comm,tid,trace
+ 'trace' not valid for hardware events. Ignoring.
+ 'trace' not valid for software events. Ignoring.
+
+ Alternatively, if the type is given an invalid field is specified it
+ is an error. For example:
+
+ perf script -v -f sw:comm,tid,trace
+ 'trace' not valid for software events.
+
+ At this point usage is displayed, and perf-script exits.
+
+ Finally, a user may not set fields to none for all event types.
+ i.e., -f "" is not allowed.
+
-k::
--vmlinux=<file>::
vmlinux pathname
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 207dee5..1455413 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -5,6 +5,8 @@
# The default target of this Makefile is...
all:
+include config/utilities.mak
+
ifneq ($(OUTPUT),)
# check that the output directory actually exists
OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
@@ -13,6 +15,12 @@
# Define V to have a more verbose compile.
#
+# Define PYTHON to point to the python binary if the default
+# `python' is not correct; for example: PYTHON=python2
+#
+# Define PYTHON_CONFIG to point to the python-config binary if
+# the default `$(PYTHON)-config' is not correct.
+#
# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
#
# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
@@ -35,15 +43,21 @@
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh[234].*/sh/ )
+CC = $(CROSS_COMPILE)gcc
+AR = $(CROSS_COMPILE)ar
+
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
ARCH := x86
endif
ifeq ($(ARCH),x86_64)
- RAW_ARCH := x86_64
- ARCH := x86
- ARCH_CFLAGS := -DARCH_X86_64
- ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
+ ARCH := x86
+ IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -xc - | tail -n 1)
+ ifeq (${IS_X86_64}, 1)
+ RAW_ARCH := x86_64
+ ARCH_CFLAGS := -DARCH_X86_64
+ ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
+ endif
endif
#
@@ -119,8 +133,6 @@
export prefix bindir sharedir sysconfdir
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
RM = rm -f
MKDIR = mkdir
FIND = find
@@ -130,7 +142,7 @@
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
--include feature-tests.mak
+-include config/feature-tests.mak
ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
CFLAGS := $(CFLAGS) -fstack-protector-all
@@ -165,12 +177,10 @@
strip-libs = $(filter-out -l%,$(1))
$(OUTPUT)python/perf.so: $(PYRF_OBJS)
- $(QUIET_GEN)( \
- export CFLAGS="$(BASIC_CFLAGS)"; \
- python util/setup.py --quiet build_ext --build-lib='$(OUTPUT)python' \
- --build-temp='$(OUTPUT)python/temp' \
- )
-
+ $(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \
+ --quiet build_ext \
+ --build-lib='$(OUTPUT)python' \
+ --build-temp='$(OUTPUT)python/temp'
#
# No Perl scripts right now:
#
@@ -475,24 +485,74 @@
endif
endif
-ifdef NO_LIBPYTHON
- BASIC_CFLAGS += -DNO_LIBPYTHON
+disable-python = $(eval $(disable-python_code))
+define disable-python_code
+ BASIC_CFLAGS += -DNO_LIBPYTHON
+ $(if $(1),$(warning No $(1) was found))
+ $(warning Python support won't be built)
+endef
+
+override PYTHON := \
+ $(call get-executable-or-default,PYTHON,python)
+
+ifndef PYTHON
+ $(call disable-python,python interpreter)
+ python-clean :=
else
- PYTHON_EMBED_LDOPTS = $(shell python-config --ldflags 2>/dev/null)
- PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
- PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
- PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
- FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
- ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
- msg := $(warning No Python.h found, install python-dev[el] to have python support in 'perf script' and to build the python bindings)
- BASIC_CFLAGS += -DNO_LIBPYTHON
- else
- ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
- EXTLIBS += $(PYTHON_EMBED_LIBADD)
- LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
- LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
- LANG_BINDINGS += $(OUTPUT)python/perf.so
- endif
+
+ PYTHON_WORD := $(call shell-wordify,$(PYTHON))
+
+ python-clean := $(PYTHON_WORD) util/setup.py clean \
+ --build-lib='$(OUTPUT)python' \
+ --build-temp='$(OUTPUT)python/temp'
+
+ ifdef NO_LIBPYTHON
+ $(call disable-python)
+ else
+
+ override PYTHON_CONFIG := \
+ $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON)-config)
+
+ ifndef PYTHON_CONFIG
+ $(call disable-python,python-config tool)
+ else
+
+ PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
+
+ PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+ PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+ FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+
+ ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
+ $(call disable-python,Python.h (for Python 2.x))
+ else
+
+ ifneq ($(call try-cc,$(SOURCE_PYTHON_VERSION),$(FLAGS_PYTHON_EMBED)),y)
+ $(warning Python 3 is not yet supported; please set)
+ $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
+ $(warning If you also have Python 2 installed, then)
+ $(warning try something like:)
+ $(warning $(and ,))
+ $(warning $(and ,) make PYTHON=python2)
+ $(warning $(and ,))
+ $(warning Otherwise, disable Python support entirely:)
+ $(warning $(and ,))
+ $(warning $(and ,) make NO_LIBPYTHON=1)
+ $(warning $(and ,))
+ $(error $(and ,))
+ else
+ ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
+ EXTLIBS += $(PYTHON_EMBED_LIBADD)
+ LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
+ LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
+ LANG_BINDINGS += $(OUTPUT)python/perf.so
+ endif
+
+ endif
+ endif
+ endif
endif
ifdef NO_DEMANGLE
@@ -833,8 +893,7 @@
$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
$(MAKE) -C Documentation/ clean
$(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS
- @python util/setup.py clean --build-lib='$(OUTPUT)python' \
- --build-temp='$(OUTPUT)python/temp'
+ $(python-clean)
.PHONY: all install clean strip
.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 4165382..0974f95 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -427,7 +427,7 @@
{
int i;
- for (i = 0; i < evsel_list->cpus->nr; i++) {
+ for (i = 0; i < evsel_list->nr_mmaps; i++) {
if (evsel_list->mmap[i].base)
mmap_read(&evsel_list->mmap[i]);
}
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index ac574ea..974f6d3 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -49,57 +49,169 @@
};
/* default set to maintain compatibility with current format */
-static u64 output_fields[PERF_TYPE_MAX] = {
- [PERF_TYPE_HARDWARE] = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | \
- PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | \
- PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+static struct {
+ bool user_set;
+ bool wildcard_set;
+ u64 fields;
+ u64 invalid_fields;
+} output[PERF_TYPE_MAX] = {
- [PERF_TYPE_SOFTWARE] = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | \
- PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | \
- PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+ [PERF_TYPE_HARDWARE] = {
+ .user_set = false,
- [PERF_TYPE_TRACEPOINT] = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | \
- PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | \
- PERF_OUTPUT_EVNAME | PERF_OUTPUT_TRACE,
+ .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+ PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+ PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+
+ .invalid_fields = PERF_OUTPUT_TRACE,
+ },
+
+ [PERF_TYPE_SOFTWARE] = {
+ .user_set = false,
+
+ .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+ PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+ PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+
+ .invalid_fields = PERF_OUTPUT_TRACE,
+ },
+
+ [PERF_TYPE_TRACEPOINT] = {
+ .user_set = false,
+
+ .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+ PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+ PERF_OUTPUT_EVNAME | PERF_OUTPUT_TRACE,
+ },
+
+ [PERF_TYPE_RAW] = {
+ .user_set = false,
+
+ .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+ PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+ PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+
+ .invalid_fields = PERF_OUTPUT_TRACE,
+ },
};
-static bool output_set_by_user;
-
-#define PRINT_FIELD(x) (output_fields[attr->type] & PERF_OUTPUT_##x)
-
-static int perf_session__check_attr(struct perf_session *session,
- struct perf_event_attr *attr)
+static bool output_set_by_user(void)
{
+ int j;
+ for (j = 0; j < PERF_TYPE_MAX; ++j) {
+ if (output[j].user_set)
+ return true;
+ }
+ return false;
+}
+
+static const char *output_field2str(enum perf_output_field field)
+{
+ int i, imax = ARRAY_SIZE(all_output_options);
+ const char *str = "";
+
+ for (i = 0; i < imax; ++i) {
+ if (all_output_options[i].field == field) {
+ str = all_output_options[i].str;
+ break;
+ }
+ }
+ return str;
+}
+
+#define PRINT_FIELD(x) (output[attr->type].fields & PERF_OUTPUT_##x)
+
+static int perf_event_attr__check_stype(struct perf_event_attr *attr,
+ u64 sample_type, const char *sample_msg,
+ enum perf_output_field field)
+{
+ int type = attr->type;
+ const char *evname;
+
+ if (attr->sample_type & sample_type)
+ return 0;
+
+ if (output[type].user_set) {
+ evname = __event_name(attr->type, attr->config);
+ pr_err("Samples for '%s' event do not have %s attribute set. "
+ "Cannot print '%s' field.\n",
+ evname, sample_msg, output_field2str(field));
+ return -1;
+ }
+
+ /* user did not ask for it explicitly so remove from the default list */
+ output[type].fields &= ~field;
+ evname = __event_name(attr->type, attr->config);
+ pr_debug("Samples for '%s' event do not have %s attribute set. "
+ "Skipping '%s' field.\n",
+ evname, sample_msg, output_field2str(field));
+
+ return 0;
+}
+
+static int perf_evsel__check_attr(struct perf_evsel *evsel,
+ struct perf_session *session)
+{
+ struct perf_event_attr *attr = &evsel->attr;
+
if (PRINT_FIELD(TRACE) &&
!perf_session__has_traces(session, "record -R"))
return -EINVAL;
if (PRINT_FIELD(SYM)) {
- if (!(session->sample_type & PERF_SAMPLE_IP)) {
- pr_err("Samples do not contain IP data.\n");
+ if (perf_event_attr__check_stype(attr, PERF_SAMPLE_IP, "IP",
+ PERF_OUTPUT_SYM))
return -EINVAL;
- }
+
if (!no_callchain &&
- !(session->sample_type & PERF_SAMPLE_CALLCHAIN))
+ !(attr->sample_type & PERF_SAMPLE_CALLCHAIN))
symbol_conf.use_callchain = false;
}
if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
- !(session->sample_type & PERF_SAMPLE_TID)) {
- pr_err("Samples do not contain TID/PID data.\n");
+ perf_event_attr__check_stype(attr, PERF_SAMPLE_TID, "TID",
+ PERF_OUTPUT_TID|PERF_OUTPUT_PID))
return -EINVAL;
- }
if (PRINT_FIELD(TIME) &&
- !(session->sample_type & PERF_SAMPLE_TIME)) {
- pr_err("Samples do not contain timestamps.\n");
+ perf_event_attr__check_stype(attr, PERF_SAMPLE_TIME, "TIME",
+ PERF_OUTPUT_TIME))
return -EINVAL;
- }
if (PRINT_FIELD(CPU) &&
- !(session->sample_type & PERF_SAMPLE_CPU)) {
- pr_err("Samples do not contain cpu.\n");
+ perf_event_attr__check_stype(attr, PERF_SAMPLE_CPU, "CPU",
+ PERF_OUTPUT_CPU))
return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * verify all user requested events exist and the samples
+ * have the expected data
+ */
+static int perf_session__check_output_opt(struct perf_session *session)
+{
+ int j;
+ struct perf_evsel *evsel;
+
+ for (j = 0; j < PERF_TYPE_MAX; ++j) {
+ evsel = perf_session__find_first_evtype(session, j);
+
+ /*
+ * even if fields is set to 0 (ie., show nothing) event must
+ * exist if user explicitly includes it on the command line
+ */
+ if (!evsel && output[j].user_set && !output[j].wildcard_set) {
+ pr_err("%s events do not exist. "
+ "Remove corresponding -f option to proceed.\n",
+ event_type(j));
+ return -1;
+ }
+
+ if (evsel && output[j].fields &&
+ perf_evsel__check_attr(evsel, session))
+ return -1;
}
return 0;
@@ -168,10 +280,7 @@
{
struct perf_event_attr *attr = &evsel->attr;
- if (output_fields[attr->type] == 0)
- return;
-
- if (perf_session__check_attr(session, attr) < 0)
+ if (output[attr->type].fields == 0)
return;
print_sample_start(sample, thread, attr);
@@ -451,6 +560,7 @@
{
char *tok;
int i, imax = sizeof(all_output_options) / sizeof(struct output_option);
+ int j;
int rc = 0;
char *str = strdup(arg);
int type = -1;
@@ -458,52 +568,99 @@
if (!str)
return -ENOMEM;
- tok = strtok(str, ":");
- if (!tok) {
- fprintf(stderr,
- "Invalid field string - not prepended with type.");
- return -EINVAL;
- }
-
- /* first word should state which event type user
- * is specifying the fields
+ /* first word can state for which event type the user is specifying
+ * the fields. If no type exists, the specified fields apply to all
+ * event types found in the file minus the invalid fields for a type.
*/
- if (!strcmp(tok, "hw"))
- type = PERF_TYPE_HARDWARE;
- else if (!strcmp(tok, "sw"))
- type = PERF_TYPE_SOFTWARE;
- else if (!strcmp(tok, "trace"))
- type = PERF_TYPE_TRACEPOINT;
- else {
- fprintf(stderr, "Invalid event type in field string.");
- return -EINVAL;
+ tok = strchr(str, ':');
+ if (tok) {
+ *tok = '\0';
+ tok++;
+ if (!strcmp(str, "hw"))
+ type = PERF_TYPE_HARDWARE;
+ else if (!strcmp(str, "sw"))
+ type = PERF_TYPE_SOFTWARE;
+ else if (!strcmp(str, "trace"))
+ type = PERF_TYPE_TRACEPOINT;
+ else if (!strcmp(str, "raw"))
+ type = PERF_TYPE_RAW;
+ else {
+ fprintf(stderr, "Invalid event type in field string.\n");
+ return -EINVAL;
+ }
+
+ if (output[type].user_set)
+ pr_warning("Overriding previous field request for %s events.\n",
+ event_type(type));
+
+ output[type].fields = 0;
+ output[type].user_set = true;
+ output[type].wildcard_set = false;
+
+ } else {
+ tok = str;
+ if (strlen(str) == 0) {
+ fprintf(stderr,
+ "Cannot set fields to 'none' for all event types.\n");
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (output_set_by_user())
+ pr_warning("Overriding previous field request for all events.\n");
+
+ for (j = 0; j < PERF_TYPE_MAX; ++j) {
+ output[j].fields = 0;
+ output[j].user_set = true;
+ output[j].wildcard_set = true;
+ }
}
- output_fields[type] = 0;
- while (1) {
- tok = strtok(NULL, ",");
- if (!tok)
- break;
+ tok = strtok(tok, ",");
+ while (tok) {
for (i = 0; i < imax; ++i) {
- if (strcmp(tok, all_output_options[i].str) == 0) {
- output_fields[type] |= all_output_options[i].field;
+ if (strcmp(tok, all_output_options[i].str) == 0)
break;
- }
}
if (i == imax) {
- fprintf(stderr, "Invalid field requested.");
+ fprintf(stderr, "Invalid field requested.\n");
rc = -EINVAL;
- break;
+ goto out;
+ }
+
+ if (type == -1) {
+ /* add user option to all events types for
+ * which it is valid
+ */
+ for (j = 0; j < PERF_TYPE_MAX; ++j) {
+ if (output[j].invalid_fields & all_output_options[i].field) {
+ pr_warning("\'%s\' not valid for %s events. Ignoring.\n",
+ all_output_options[i].str, event_type(j));
+ } else
+ output[j].fields |= all_output_options[i].field;
+ }
+ } else {
+ if (output[type].invalid_fields & all_output_options[i].field) {
+ fprintf(stderr, "\'%s\' not valid for %s events.\n",
+ all_output_options[i].str, event_type(type));
+
+ rc = -EINVAL;
+ goto out;
+ }
+ output[type].fields |= all_output_options[i].field;
+ }
+
+ tok = strtok(NULL, ",");
+ }
+
+ if (type >= 0) {
+ if (output[type].fields == 0) {
+ pr_debug("No fields requested for %s type. "
+ "Events will not be displayed.\n", event_type(type));
}
}
- if (output_fields[type] == 0) {
- pr_debug("No fields requested for %s type. "
- "Events will not be displayed\n", event_type(type));
- }
-
- output_set_by_user = true;
-
+out:
free(str);
return rc;
}
@@ -829,7 +986,7 @@
OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
"Look for files with symbols relative to this directory"),
OPT_CALLBACK('f', "fields", NULL, "str",
- "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace. Fields: comm,tid,pid,time,cpu,event,trace,sym",
+ "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,sym",
parse_output_fields),
OPT_END()
@@ -1020,7 +1177,7 @@
struct stat perf_stat;
int input;
- if (output_set_by_user) {
+ if (output_set_by_user()) {
fprintf(stderr,
"custom fields not supported for generated scripts");
return -1;
@@ -1060,6 +1217,11 @@
pr_debug("perf script started with script %s\n\n", script_name);
}
+
+ err = perf_session__check_output_opt(session);
+ if (err < 0)
+ goto out;
+
err = __cmd_script(session);
perf_session__delete(session);
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 03f0e45..a9f0671 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -6,24 +6,28 @@
*
* Sample output:
- $ perf stat ~/hackbench 10
- Time: 0.104
+ $ perf stat ./hackbench 10
- Performance counter stats for '/home/mingo/hackbench':
+ Time: 0.118
- 1255.538611 task clock ticks # 10.143 CPU utilization factor
- 54011 context switches # 0.043 M/sec
- 385 CPU migrations # 0.000 M/sec
- 17755 pagefaults # 0.014 M/sec
- 3808323185 CPU cycles # 3033.219 M/sec
- 1575111190 instructions # 1254.530 M/sec
- 17367895 cache references # 13.833 M/sec
- 7674421 cache misses # 6.112 M/sec
+ Performance counter stats for './hackbench 10':
- Wall-clock time elapsed: 123.786620 msecs
+ 1708.761321 task-clock # 11.037 CPUs utilized
+ 41,190 context-switches # 0.024 M/sec
+ 6,735 CPU-migrations # 0.004 M/sec
+ 17,318 page-faults # 0.010 M/sec
+ 5,205,202,243 cycles # 3.046 GHz
+ 3,856,436,920 stalled-cycles-frontend # 74.09% frontend cycles idle
+ 1,600,790,871 stalled-cycles-backend # 30.75% backend cycles idle
+ 2,603,501,247 instructions # 0.50 insns per cycle
+ # 1.48 stalled cycles per insn
+ 484,357,498 branches # 283.455 M/sec
+ 6,388,934 branch-misses # 1.32% of all branches
+
+ 0.154822978 seconds time elapsed
*
- * Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
+ * Copyright (C) 2008-2011, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
*
* Improvements and fixes by:
*
@@ -46,6 +50,7 @@
#include "util/evlist.h"
#include "util/evsel.h"
#include "util/debug.h"
+#include "util/color.h"
#include "util/header.h"
#include "util/cpumap.h"
#include "util/thread.h"
@@ -65,14 +70,107 @@
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_FRONTEND },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_BACKEND },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES },
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
};
+/*
+ * Detailed stats (-d), covering the L1 and last level data caches:
+ */
+static struct perf_event_attr detailed_attrs[] = {
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_L1D << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_L1D << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_LL << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_LL << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) },
+};
+
+/*
+ * Very detailed stats (-d -d), covering the instruction cache and the TLB caches:
+ */
+static struct perf_event_attr very_detailed_attrs[] = {
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_L1I << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_L1I << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_DTLB << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_DTLB << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_ITLB << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_ITLB << 0 |
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) },
+
+};
+
+/*
+ * Very, very detailed stats (-d -d -d), adding prefetch events:
+ */
+static struct perf_event_attr very_very_detailed_attrs[] = {
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_L1D << 0 |
+ (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) },
+
+ { .type = PERF_TYPE_HW_CACHE,
+ .config =
+ PERF_COUNT_HW_CACHE_L1D << 0 |
+ (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) |
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) },
+};
+
+
+
struct perf_evlist *evsel_list;
static bool system_wide = false;
@@ -86,6 +184,8 @@
static pid_t target_tid = -1;
static pid_t child_pid = -1;
static bool null_run = false;
+static int detailed_run = 0;
+static bool sync_run = false;
static bool big_num = true;
static int big_num_opt = -1;
static const char *cpu_list;
@@ -156,7 +256,15 @@
struct stats runtime_nsecs_stats[MAX_NR_CPUS];
struct stats runtime_cycles_stats[MAX_NR_CPUS];
+struct stats runtime_stalled_cycles_front_stats[MAX_NR_CPUS];
+struct stats runtime_stalled_cycles_back_stats[MAX_NR_CPUS];
struct stats runtime_branches_stats[MAX_NR_CPUS];
+struct stats runtime_cacherefs_stats[MAX_NR_CPUS];
+struct stats runtime_l1_dcache_stats[MAX_NR_CPUS];
+struct stats runtime_l1_icache_stats[MAX_NR_CPUS];
+struct stats runtime_ll_cache_stats[MAX_NR_CPUS];
+struct stats runtime_itlb_cache_stats[MAX_NR_CPUS];
+struct stats runtime_dtlb_cache_stats[MAX_NR_CPUS];
struct stats walltime_nsecs_stats;
static int create_perf_stat_counter(struct perf_evsel *evsel)
@@ -193,6 +301,37 @@
}
/*
+ * Update various tracking values we maintain to print
+ * more semantic information such as miss/hit ratios,
+ * instruction rates, etc:
+ */
+static void update_shadow_stats(struct perf_evsel *counter, u64 *count)
+{
+ if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
+ update_stats(&runtime_nsecs_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
+ update_stats(&runtime_cycles_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND))
+ update_stats(&runtime_stalled_cycles_front_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND))
+ update_stats(&runtime_stalled_cycles_back_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
+ update_stats(&runtime_branches_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HARDWARE, HW_CACHE_REFERENCES))
+ update_stats(&runtime_cacherefs_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1D))
+ update_stats(&runtime_l1_dcache_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1I))
+ update_stats(&runtime_l1_icache_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_LL))
+ update_stats(&runtime_ll_cache_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_DTLB))
+ update_stats(&runtime_dtlb_cache_stats[0], count[0]);
+ else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB))
+ update_stats(&runtime_itlb_cache_stats[0], count[0]);
+}
+
+/*
* Read out the results of a single counter:
* aggregate counts across CPUs in system-wide mode
*/
@@ -217,12 +356,7 @@
/*
* Save the full runtime - to allow normalization during printout:
*/
- if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
- update_stats(&runtime_nsecs_stats[0], count[0]);
- if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
- update_stats(&runtime_cycles_stats[0], count[0]);
- if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
- update_stats(&runtime_branches_stats[0], count[0]);
+ update_shadow_stats(counter, count);
return 0;
}
@@ -242,12 +376,7 @@
count = counter->counts->cpu[cpu].values;
- if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
- update_stats(&runtime_nsecs_stats[cpu], count[0]);
- if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
- update_stats(&runtime_cycles_stats[cpu], count[0]);
- if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
- update_stats(&runtime_branches_stats[cpu], count[0]);
+ update_shadow_stats(counter, count);
}
return 0;
@@ -315,13 +444,18 @@
list_for_each_entry(counter, &evsel_list->entries, node) {
if (create_perf_stat_counter(counter) < 0) {
- if (errno == -EPERM || errno == -EACCES) {
+ if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) {
+ if (verbose)
+ ui__warning("%s event is not supported by the kernel.\n",
+ event_name(counter));
+ continue;
+ }
+
+ if (errno == EPERM || errno == EACCES) {
error("You may not have permission to collect %sstats.\n"
"\t Consider tweaking"
" /proc/sys/kernel/perf_event_paranoid or running as root.",
system_wide ? "system-wide " : "");
- } else if (errno == ENOENT) {
- error("%s event is not supported. ", event_name(counter));
} else {
error("open_counter returned with %d (%s). "
"/bin/dmesg may provide additional information.\n",
@@ -372,6 +506,16 @@
return WEXITSTATUS(status);
}
+static void print_noise_pct(double total, double avg)
+{
+ double pct = 0.0;
+
+ if (avg)
+ pct = 100.0*total/avg;
+
+ fprintf(stderr, " ( +-%6.2f%% )", pct);
+}
+
static void print_noise(struct perf_evsel *evsel, double avg)
{
struct perf_stat *ps;
@@ -380,15 +524,14 @@
return;
ps = evsel->priv;
- fprintf(stderr, " ( +- %7.3f%% )",
- 100 * stddev_stats(&ps->res_stats[0]) / avg);
+ print_noise_pct(stddev_stats(&ps->res_stats[0]), avg);
}
static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg)
{
double msecs = avg / 1e6;
char cpustr[16] = { '\0', };
- const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-24s";
+ const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-25s";
if (no_aggr)
sprintf(cpustr, "CPU%*d%s",
@@ -404,8 +547,191 @@
return;
if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK))
- fprintf(stderr, " # %10.3f CPUs ",
- avg / avg_stats(&walltime_nsecs_stats));
+ fprintf(stderr, " # %8.3f CPUs utilized ", avg / avg_stats(&walltime_nsecs_stats));
+}
+
+static void print_stalled_cycles_frontend(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_cycles_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 50.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 30.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " frontend cycles idle ");
+}
+
+static void print_stalled_cycles_backend(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_cycles_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 75.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 50.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 20.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " backend cycles idle ");
+}
+
+static void print_branch_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_branches_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 20.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 5.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " of all branches ");
+}
+
+static void print_l1_dcache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_l1_dcache_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 20.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 5.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " of all L1-dcache hits ");
+}
+
+static void print_l1_icache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_l1_icache_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 20.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 5.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " of all L1-icache hits ");
+}
+
+static void print_dtlb_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_dtlb_cache_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 20.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 5.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " of all dTLB cache hits ");
+}
+
+static void print_itlb_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_itlb_cache_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 20.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 5.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " of all iTLB cache hits ");
+}
+
+static void print_ll_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+ double total, ratio = 0.0;
+ const char *color;
+
+ total = avg_stats(&runtime_ll_cache_stats[cpu]);
+
+ if (total)
+ ratio = avg / total * 100.0;
+
+ color = PERF_COLOR_NORMAL;
+ if (ratio > 20.0)
+ color = PERF_COLOR_RED;
+ else if (ratio > 10.0)
+ color = PERF_COLOR_MAGENTA;
+ else if (ratio > 5.0)
+ color = PERF_COLOR_YELLOW;
+
+ fprintf(stderr, " # ");
+ color_fprintf(stderr, color, "%6.2f%%", ratio);
+ fprintf(stderr, " of all LL-cache hits ");
}
static void abs_printout(int cpu, struct perf_evsel *evsel, double avg)
@@ -417,9 +743,9 @@
if (csv_output)
fmt = "%s%.0f%s%s";
else if (big_num)
- fmt = "%s%'18.0f%s%-24s";
+ fmt = "%s%'18.0f%s%-25s";
else
- fmt = "%s%18.0f%s%-24s";
+ fmt = "%s%18.0f%s%-25s";
if (no_aggr)
sprintf(cpustr, "CPU%*d%s",
@@ -442,23 +768,83 @@
if (total)
ratio = avg / total;
- fprintf(stderr, " # %10.3f IPC ", ratio);
+ fprintf(stderr, " # %5.2f insns per cycle ", ratio);
+
+ total = avg_stats(&runtime_stalled_cycles_front_stats[cpu]);
+ total = max(total, avg_stats(&runtime_stalled_cycles_back_stats[cpu]));
+
+ if (total && avg) {
+ ratio = total / avg;
+ fprintf(stderr, "\n # %5.2f stalled cycles per insn", ratio);
+ }
+
} else if (perf_evsel__match(evsel, HARDWARE, HW_BRANCH_MISSES) &&
runtime_branches_stats[cpu].n != 0) {
- total = avg_stats(&runtime_branches_stats[cpu]);
+ print_branch_misses(cpu, evsel, avg);
+ } else if (
+ evsel->attr.type == PERF_TYPE_HW_CACHE &&
+ evsel->attr.config == ( PERF_COUNT_HW_CACHE_L1D |
+ ((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+ ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+ runtime_l1_dcache_stats[cpu].n != 0) {
+ print_l1_dcache_misses(cpu, evsel, avg);
+ } else if (
+ evsel->attr.type == PERF_TYPE_HW_CACHE &&
+ evsel->attr.config == ( PERF_COUNT_HW_CACHE_L1I |
+ ((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+ ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+ runtime_l1_icache_stats[cpu].n != 0) {
+ print_l1_icache_misses(cpu, evsel, avg);
+ } else if (
+ evsel->attr.type == PERF_TYPE_HW_CACHE &&
+ evsel->attr.config == ( PERF_COUNT_HW_CACHE_DTLB |
+ ((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+ ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+ runtime_dtlb_cache_stats[cpu].n != 0) {
+ print_dtlb_cache_misses(cpu, evsel, avg);
+ } else if (
+ evsel->attr.type == PERF_TYPE_HW_CACHE &&
+ evsel->attr.config == ( PERF_COUNT_HW_CACHE_ITLB |
+ ((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+ ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+ runtime_itlb_cache_stats[cpu].n != 0) {
+ print_itlb_cache_misses(cpu, evsel, avg);
+ } else if (
+ evsel->attr.type == PERF_TYPE_HW_CACHE &&
+ evsel->attr.config == ( PERF_COUNT_HW_CACHE_LL |
+ ((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+ ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+ runtime_ll_cache_stats[cpu].n != 0) {
+ print_ll_cache_misses(cpu, evsel, avg);
+ } else if (perf_evsel__match(evsel, HARDWARE, HW_CACHE_MISSES) &&
+ runtime_cacherefs_stats[cpu].n != 0) {
+ total = avg_stats(&runtime_cacherefs_stats[cpu]);
if (total)
ratio = avg * 100 / total;
- fprintf(stderr, " # %10.3f %% ", ratio);
+ fprintf(stderr, " # %8.3f %% of all cache refs ", ratio);
+ } else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_FRONTEND)) {
+ print_stalled_cycles_frontend(cpu, evsel, avg);
+ } else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_BACKEND)) {
+ print_stalled_cycles_backend(cpu, evsel, avg);
+ } else if (perf_evsel__match(evsel, HARDWARE, HW_CPU_CYCLES)) {
+ total = avg_stats(&runtime_nsecs_stats[cpu]);
+
+ if (total)
+ ratio = 1.0 * avg / total;
+
+ fprintf(stderr, " # %8.3f GHz ", ratio);
} else if (runtime_nsecs_stats[cpu].n != 0) {
total = avg_stats(&runtime_nsecs_stats[cpu]);
if (total)
ratio = 1000.0 * avg / total;
- fprintf(stderr, " # %10.3f M/sec", ratio);
+ fprintf(stderr, " # %8.3f M/sec ", ratio);
+ } else {
+ fprintf(stderr, " ");
}
}
@@ -505,8 +891,7 @@
avg_enabled = avg_stats(&ps->res_stats[1]);
avg_running = avg_stats(&ps->res_stats[2]);
- fprintf(stderr, " (scaled from %.2f%%)",
- 100 * avg_running / avg_enabled);
+ fprintf(stderr, " [%5.2f%%]", 100 * avg_running / avg_enabled);
}
fprintf(stderr, "\n");
}
@@ -548,10 +933,8 @@
if (!csv_output) {
print_noise(counter, 1.0);
- if (run != ena) {
- fprintf(stderr, " (scaled from %.2f%%)",
- 100.0 * run / ena);
- }
+ if (run != ena)
+ fprintf(stderr, " (%.2f%%)", 100.0 * run / ena);
}
fputc('\n', stderr);
}
@@ -591,13 +974,14 @@
}
if (!csv_output) {
- fprintf(stderr, "\n");
- fprintf(stderr, " %18.9f seconds time elapsed",
+ if (!null_run)
+ fprintf(stderr, "\n");
+ fprintf(stderr, " %17.9f seconds time elapsed",
avg_stats(&walltime_nsecs_stats)/1e9);
if (run_count > 1) {
- fprintf(stderr, " ( +- %7.3f%% )",
- 100*stddev_stats(&walltime_nsecs_stats) /
- avg_stats(&walltime_nsecs_stats));
+ fprintf(stderr, " ");
+ print_noise_pct(stddev_stats(&walltime_nsecs_stats),
+ avg_stats(&walltime_nsecs_stats));
}
fprintf(stderr, "\n\n");
}
@@ -659,6 +1043,10 @@
"repeat command and print average + stddev (max: 100)"),
OPT_BOOLEAN('n', "null", &null_run,
"null run - dont start any counters"),
+ OPT_INCR('d', "detailed", &detailed_run,
+ "detailed run - start a lot of events"),
+ OPT_BOOLEAN('S', "sync", &sync_run,
+ "call sync() before starting a run"),
OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL,
"print large numbers with thousands\' separators",
stat__set_big_num),
@@ -674,6 +1062,70 @@
OPT_END()
};
+/*
+ * Add default attributes, if there were no attributes specified or
+ * if -d/--detailed, -d -d or -d -d -d is used:
+ */
+static int add_default_attributes(void)
+{
+ struct perf_evsel *pos;
+ size_t attr_nr = 0;
+ size_t c;
+
+ /* Set attrs if no event is selected and !null_run: */
+ if (null_run)
+ return 0;
+
+ if (!evsel_list->nr_entries) {
+ for (c = 0; c < ARRAY_SIZE(default_attrs); c++) {
+ pos = perf_evsel__new(default_attrs + c, c + attr_nr);
+ if (pos == NULL)
+ return -1;
+ perf_evlist__add(evsel_list, pos);
+ }
+ attr_nr += c;
+ }
+
+ /* Detailed events get appended to the event list: */
+
+ if (detailed_run < 1)
+ return 0;
+
+ /* Append detailed run extra attributes: */
+ for (c = 0; c < ARRAY_SIZE(detailed_attrs); c++) {
+ pos = perf_evsel__new(detailed_attrs + c, c + attr_nr);
+ if (pos == NULL)
+ return -1;
+ perf_evlist__add(evsel_list, pos);
+ }
+ attr_nr += c;
+
+ if (detailed_run < 2)
+ return 0;
+
+ /* Append very detailed run extra attributes: */
+ for (c = 0; c < ARRAY_SIZE(very_detailed_attrs); c++) {
+ pos = perf_evsel__new(very_detailed_attrs + c, c + attr_nr);
+ if (pos == NULL)
+ return -1;
+ perf_evlist__add(evsel_list, pos);
+ }
+
+ if (detailed_run < 3)
+ return 0;
+
+ /* Append very, very detailed run extra attributes: */
+ for (c = 0; c < ARRAY_SIZE(very_very_detailed_attrs); c++) {
+ pos = perf_evsel__new(very_very_detailed_attrs + c, c + attr_nr);
+ if (pos == NULL)
+ return -1;
+ perf_evlist__add(evsel_list, pos);
+ }
+
+
+ return 0;
+}
+
int cmd_stat(int argc, const char **argv, const char *prefix __used)
{
struct perf_evsel *pos;
@@ -719,17 +1171,8 @@
usage_with_options(stat_usage, options);
}
- /* Set attrs and nr_counters if no event is selected and !null_run */
- if (!null_run && !evsel_list->nr_entries) {
- size_t c;
-
- for (c = 0; c < ARRAY_SIZE(default_attrs); ++c) {
- pos = perf_evsel__new(&default_attrs[c], c);
- if (pos == NULL)
- goto out;
- perf_evlist__add(evsel_list, pos);
- }
- }
+ if (add_default_attributes())
+ goto out;
if (target_pid != -1)
target_tid = target_pid;
@@ -773,6 +1216,10 @@
for (run_idx = 0; run_idx < run_count; run_idx++) {
if (run_count != 1 && verbose)
fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
+
+ if (sync_run)
+ sync();
+
status = run_perf_stat(argc, argv);
}
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 11e3c84..2f9a337 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -549,7 +549,7 @@
++foo;
}
- while ((event = perf_evlist__read_on_cpu(evlist, 0)) != NULL) {
+ while ((event = perf_evlist__mmap_read(evlist, 0)) != NULL) {
struct perf_sample sample;
if (event->header.type != PERF_RECORD_SAMPLE) {
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 7e3d6e3..ebfc7cf 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -801,12 +801,12 @@
}
}
-static void perf_session__mmap_read_cpu(struct perf_session *self, int cpu)
+static void perf_session__mmap_read_idx(struct perf_session *self, int idx)
{
struct perf_sample sample;
union perf_event *event;
- while ((event = perf_evlist__read_on_cpu(top.evlist, cpu)) != NULL) {
+ while ((event = perf_evlist__mmap_read(top.evlist, idx)) != NULL) {
perf_session__parse_sample(self, event, &sample);
if (event->header.type == PERF_RECORD_SAMPLE)
@@ -820,8 +820,8 @@
{
int i;
- for (i = 0; i < top.evlist->cpus->nr; i++)
- perf_session__mmap_read_cpu(self, i);
+ for (i = 0; i < top.evlist->nr_mmaps; i++)
+ perf_session__mmap_read_idx(self, i);
}
static void start_counters(struct perf_evlist *evlist)
diff --git a/tools/perf/feature-tests.mak b/tools/perf/config/feature-tests.mak
similarity index 85%
rename from tools/perf/feature-tests.mak
rename to tools/perf/config/feature-tests.mak
index b041ca6..6170fd2 100644
--- a/tools/perf/feature-tests.mak
+++ b/tools/perf/config/feature-tests.mak
@@ -79,9 +79,15 @@
endif
ifndef NO_LIBPYTHON
+define SOURCE_PYTHON_VERSION
+#include <Python.h>
+#if PY_VERSION_HEX >= 0x03000000
+ #error
+#endif
+int main(void){}
+endef
define SOURCE_PYTHON_EMBED
#include <Python.h>
-
int main(void)
{
Py_Initialize();
@@ -120,11 +126,3 @@
return 0;
}
endef
-
-# try-cc
-# Usage: option = $(call try-cc, source-to-build, cc-options)
-try-cc = $(shell sh -c \
- 'TMP="$(OUTPUT)$(TMPOUT).$$$$"; \
- echo "$(1)" | \
- $(CC) -x c - $(2) -o "$$TMP" > /dev/null 2>&1 && echo y; \
- rm -f "$$TMP"')
diff --git a/tools/perf/config/utilities.mak b/tools/perf/config/utilities.mak
new file mode 100644
index 0000000..8046182
--- /dev/null
+++ b/tools/perf/config/utilities.mak
@@ -0,0 +1,188 @@
+# This allows us to work with the newline character:
+define newline
+
+
+endef
+newline := $(newline)
+
+# nl-escape
+#
+# Usage: escape = $(call nl-escape[,escape])
+#
+# This is used as the common way to specify
+# what should replace a newline when escaping
+# newlines; the default is a bizarre string.
+#
+nl-escape = $(or $(1),m822df3020w6a44id34bt574ctac44eb9f4n)
+
+# escape-nl
+#
+# Usage: escaped-text = $(call escape-nl,text[,escape])
+#
+# GNU make's $(shell ...) function converts to a
+# single space each newline character in the output
+# produced during the expansion; this may not be
+# desirable.
+#
+# The only solution is to change each newline into
+# something that won't be converted, so that the
+# information can be recovered later with
+# $(call unescape-nl...)
+#
+escape-nl = $(subst $(newline),$(call nl-escape,$(2)),$(1))
+
+# unescape-nl
+#
+# Usage: text = $(call unescape-nl,escaped-text[,escape])
+#
+# See escape-nl.
+#
+unescape-nl = $(subst $(call nl-escape,$(2)),$(newline),$(1))
+
+# shell-escape-nl
+#
+# Usage: $(shell some-command | $(call shell-escape-nl[,escape]))
+#
+# Use this to escape newlines from within a shell call;
+# the default escape is a bizarre string.
+#
+# NOTE: The escape is used directly as a string constant
+# in an `awk' program that is delimited by shell
+# single-quotes, so be wary of the characters
+# that are chosen.
+#
+define shell-escape-nl
+awk 'NR==1 {t=$$0} NR>1 {t=t "$(nl-escape)" $$0} END {printf t}'
+endef
+
+# shell-unescape-nl
+#
+# Usage: $(shell some-command | $(call shell-unescape-nl[,escape]))
+#
+# Use this to unescape newlines from within a shell call;
+# the default escape is a bizarre string.
+#
+# NOTE: The escape is used directly as an extended regular
+# expression constant in an `awk' program that is
+# delimited by shell single-quotes, so be wary
+# of the characters that are chosen.
+#
+# (The bash shell has a bug where `{gsub(...),...}' is
+# misinterpreted as a brace expansion; this can be
+# overcome by putting a space between `{' and `gsub').
+#
+define shell-unescape-nl
+awk 'NR==1 {t=$$0} NR>1 {t=t "\n" $$0} END { gsub(/$(nl-escape)/,"\n",t); printf t }'
+endef
+
+# escape-for-shell-sq
+#
+# Usage: embeddable-text = $(call escape-for-shell-sq,text)
+#
+# This function produces text that is suitable for
+# embedding in a shell string that is delimited by
+# single-quotes.
+#
+escape-for-shell-sq = $(subst ','\'',$(1))
+
+# shell-sq
+#
+# Usage: single-quoted-and-escaped-text = $(call shell-sq,text)
+#
+shell-sq = '$(escape-for-shell-sq)'
+
+# shell-wordify
+#
+# Usage: wordified-text = $(call shell-wordify,text)
+#
+# For instance:
+#
+# |define text
+# |hello
+# |world
+# |endef
+# |
+# |target:
+# | echo $(call shell-wordify,$(text))
+#
+# At least GNU make gets confused by expanding a newline
+# within the context of a command line of a makefile rule
+# (this is in constrast to a `$(shell ...)' function call,
+# which can handle it just fine).
+#
+# This function avoids the problem by producing a string
+# that works as a shell word, regardless of whether or
+# not it contains a newline.
+#
+# If the text to be wordified contains a newline, then
+# an intrictate shell command substitution is constructed
+# to render the text as a single line; when the shell
+# processes the resulting escaped text, it transforms
+# it into the original unescaped text.
+#
+# If the text does not contain a newline, then this function
+# produces the same results as the `$(shell-sq)' function.
+#
+shell-wordify = $(if $(findstring $(newline),$(1)),$(_sw-esc-nl),$(shell-sq))
+define _sw-esc-nl
+"$$(echo $(call escape-nl,$(shell-sq),$(2)) | $(call shell-unescape-nl,$(2)))"
+endef
+
+# is-absolute
+#
+# Usage: bool-value = $(call is-absolute,path)
+#
+is-absolute = $(shell echo $(shell-sq) | grep ^/ -q && echo y)
+
+# lookup
+#
+# Usage: absolute-executable-path-or-empty = $(call lookup,path)
+#
+# (It's necessary to use `sh -c' because GNU make messes up by
+# trying too hard and getting things wrong).
+#
+lookup = $(call unescape-nl,$(shell sh -c $(_l-sh)))
+_l-sh = $(call shell-sq,command -v $(shell-sq) | $(call shell-escape-nl,))
+
+# is-executable
+#
+# Usage: bool-value = $(call is-executable,path)
+#
+# (It's necessary to use `sh -c' because GNU make messes up by
+# trying too hard and getting things wrong).
+#
+is-executable = $(call _is-executable-helper,$(shell-sq))
+_is-executable-helper = $(shell sh -c $(_is-executable-sh))
+_is-executable-sh = $(call shell-sq,test -f $(1) -a -x $(1) && echo y)
+
+# get-executable
+#
+# Usage: absolute-executable-path-or-empty = $(call get-executable,path)
+#
+# The goal is to get an absolute path for an executable;
+# the `command -v' is defined by POSIX, but it's not
+# necessarily very portable, so it's only used if
+# relative path resolution is requested, as determined
+# by the presence of a leading `/'.
+#
+get-executable = $(if $(1),$(if $(is-absolute),$(_ge-abspath),$(lookup)))
+_ge-abspath = $(if $(is-executable),$(1))
+
+# get-supplied-or-default-executable
+#
+# Usage: absolute-executable-path-or-empty = $(call get-executable-or-default,variable,default)
+#
+define get-executable-or-default
+$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2)))
+endef
+_ge_attempt = $(or $(get-executable),$(_gea_warn),$(call _gea_err,$(2)))
+_gea_warn = $(warning The path '$(1)' is not executable.)
+_gea_err = $(if $(1),$(error Please set '$(1)' appropriately))
+
+# try-cc
+# Usage: option = $(call try-cc, source-to-build, cc-options)
+try-cc = $(shell sh -c \
+ 'TMP="$(OUTPUT)$(TMPOUT).$$$$"; \
+ echo "$(1)" | \
+ $(CC) -x c - $(2) -o "$$TMP" > /dev/null 2>&1 && echo y; \
+ rm -f "$$TMP"')
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 45da8d1..23eb22b 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -166,11 +166,11 @@
return NULL;
}
-union perf_event *perf_evlist__read_on_cpu(struct perf_evlist *evlist, int cpu)
+union perf_event *perf_evlist__mmap_read(struct perf_evlist *evlist, int idx)
{
/* XXX Move this to perf.c, making it generally available */
unsigned int page_size = sysconf(_SC_PAGE_SIZE);
- struct perf_mmap *md = &evlist->mmap[cpu];
+ struct perf_mmap *md = &evlist->mmap[idx];
unsigned int head = perf_mmap__read_head(md);
unsigned int old = md->prev;
unsigned char *data = md->base + page_size;
@@ -235,31 +235,37 @@
void perf_evlist__munmap(struct perf_evlist *evlist)
{
- int cpu;
+ int i;
- for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
- if (evlist->mmap[cpu].base != NULL) {
- munmap(evlist->mmap[cpu].base, evlist->mmap_len);
- evlist->mmap[cpu].base = NULL;
+ for (i = 0; i < evlist->nr_mmaps; i++) {
+ if (evlist->mmap[i].base != NULL) {
+ munmap(evlist->mmap[i].base, evlist->mmap_len);
+ evlist->mmap[i].base = NULL;
}
}
+
+ free(evlist->mmap);
+ evlist->mmap = NULL;
}
int perf_evlist__alloc_mmap(struct perf_evlist *evlist)
{
- evlist->mmap = zalloc(evlist->cpus->nr * sizeof(struct perf_mmap));
+ evlist->nr_mmaps = evlist->cpus->nr;
+ if (evlist->cpus->map[0] == -1)
+ evlist->nr_mmaps = evlist->threads->nr;
+ evlist->mmap = zalloc(evlist->nr_mmaps * sizeof(struct perf_mmap));
return evlist->mmap != NULL ? 0 : -ENOMEM;
}
static int __perf_evlist__mmap(struct perf_evlist *evlist, struct perf_evsel *evsel,
- int cpu, int prot, int mask, int fd)
+ int idx, int prot, int mask, int fd)
{
- evlist->mmap[cpu].prev = 0;
- evlist->mmap[cpu].mask = mask;
- evlist->mmap[cpu].base = mmap(NULL, evlist->mmap_len, prot,
+ evlist->mmap[idx].prev = 0;
+ evlist->mmap[idx].mask = mask;
+ evlist->mmap[idx].base = mmap(NULL, evlist->mmap_len, prot,
MAP_SHARED, fd, 0);
- if (evlist->mmap[cpu].base == MAP_FAILED) {
- if (evlist->cpus->map[cpu] == -1 && evsel->attr.inherit)
+ if (evlist->mmap[idx].base == MAP_FAILED) {
+ if (evlist->cpus->map[idx] == -1 && evsel->attr.inherit)
ui__warning("Inherit is not allowed on per-task "
"events using mmap.\n");
return -1;
@@ -269,6 +275,86 @@
return 0;
}
+static int perf_evlist__mmap_per_cpu(struct perf_evlist *evlist, int prot, int mask)
+{
+ struct perf_evsel *evsel;
+ int cpu, thread;
+
+ for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+ int output = -1;
+
+ for (thread = 0; thread < evlist->threads->nr; thread++) {
+ list_for_each_entry(evsel, &evlist->entries, node) {
+ int fd = FD(evsel, cpu, thread);
+
+ if (output == -1) {
+ output = fd;
+ if (__perf_evlist__mmap(evlist, evsel, cpu,
+ prot, mask, output) < 0)
+ goto out_unmap;
+ } else {
+ if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, output) != 0)
+ goto out_unmap;
+ }
+
+ if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
+ perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
+ goto out_unmap;
+ }
+ }
+ }
+
+ return 0;
+
+out_unmap:
+ for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+ if (evlist->mmap[cpu].base != NULL) {
+ munmap(evlist->mmap[cpu].base, evlist->mmap_len);
+ evlist->mmap[cpu].base = NULL;
+ }
+ }
+ return -1;
+}
+
+static int perf_evlist__mmap_per_thread(struct perf_evlist *evlist, int prot, int mask)
+{
+ struct perf_evsel *evsel;
+ int thread;
+
+ for (thread = 0; thread < evlist->threads->nr; thread++) {
+ int output = -1;
+
+ list_for_each_entry(evsel, &evlist->entries, node) {
+ int fd = FD(evsel, 0, thread);
+
+ if (output == -1) {
+ output = fd;
+ if (__perf_evlist__mmap(evlist, evsel, thread,
+ prot, mask, output) < 0)
+ goto out_unmap;
+ } else {
+ if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, output) != 0)
+ goto out_unmap;
+ }
+
+ if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
+ perf_evlist__id_add_fd(evlist, evsel, 0, thread, fd) < 0)
+ goto out_unmap;
+ }
+ }
+
+ return 0;
+
+out_unmap:
+ for (thread = 0; thread < evlist->threads->nr; thread++) {
+ if (evlist->mmap[thread].base != NULL) {
+ munmap(evlist->mmap[thread].base, evlist->mmap_len);
+ evlist->mmap[thread].base = NULL;
+ }
+ }
+ return -1;
+}
+
/** perf_evlist__mmap - Create per cpu maps to receive events
*
* @evlist - list of events
@@ -287,11 +373,11 @@
int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite)
{
unsigned int page_size = sysconf(_SC_PAGE_SIZE);
- int mask = pages * page_size - 1, cpu;
- struct perf_evsel *first_evsel, *evsel;
+ int mask = pages * page_size - 1;
+ struct perf_evsel *evsel;
const struct cpu_map *cpus = evlist->cpus;
const struct thread_map *threads = evlist->threads;
- int thread, prot = PROT_READ | (overwrite ? 0 : PROT_WRITE);
+ int prot = PROT_READ | (overwrite ? 0 : PROT_WRITE);
if (evlist->mmap == NULL && perf_evlist__alloc_mmap(evlist) < 0)
return -ENOMEM;
@@ -301,43 +387,18 @@
evlist->overwrite = overwrite;
evlist->mmap_len = (pages + 1) * page_size;
- first_evsel = list_entry(evlist->entries.next, struct perf_evsel, node);
list_for_each_entry(evsel, &evlist->entries, node) {
if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
evsel->sample_id == NULL &&
perf_evsel__alloc_id(evsel, cpus->nr, threads->nr) < 0)
return -ENOMEM;
-
- for (cpu = 0; cpu < cpus->nr; cpu++) {
- for (thread = 0; thread < threads->nr; thread++) {
- int fd = FD(evsel, cpu, thread);
-
- if (evsel->idx || thread) {
- if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT,
- FD(first_evsel, cpu, 0)) != 0)
- goto out_unmap;
- } else if (__perf_evlist__mmap(evlist, evsel, cpu,
- prot, mask, fd) < 0)
- goto out_unmap;
-
- if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
- perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
- goto out_unmap;
- }
- }
}
- return 0;
+ if (evlist->cpus->map[0] == -1)
+ return perf_evlist__mmap_per_thread(evlist, prot, mask);
-out_unmap:
- for (cpu = 0; cpu < cpus->nr; cpu++) {
- if (evlist->mmap[cpu].base != NULL) {
- munmap(evlist->mmap[cpu].base, evlist->mmap_len);
- evlist->mmap[cpu].base = NULL;
- }
- }
- return -1;
+ return perf_evlist__mmap_per_cpu(evlist, prot, mask);
}
int perf_evlist__create_maps(struct perf_evlist *evlist, pid_t target_pid,
@@ -348,7 +409,7 @@
if (evlist->threads == NULL)
return -1;
- if (target_tid != -1)
+ if (cpu_list == NULL && target_tid != -1)
evlist->cpus = cpu_map__dummy_new();
else
evlist->cpus = cpu_map__new(cpu_list);
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 8b1cb7a..7109d7a 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -17,6 +17,7 @@
struct hlist_head heads[PERF_EVLIST__HLIST_SIZE];
int nr_entries;
int nr_fds;
+ int nr_mmaps;
int mmap_len;
bool overwrite;
union perf_event event_copy;
@@ -46,7 +47,7 @@
struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id);
-union perf_event *perf_evlist__read_on_cpu(struct perf_evlist *self, int cpu);
+union perf_event *perf_evlist__mmap_read(struct perf_evlist *self, int idx);
int perf_evlist__alloc_mmap(struct perf_evlist *evlist);
int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite);
diff --git a/tools/perf/util/include/asm/alternative-asm.h b/tools/perf/util/include/asm/alternative-asm.h
new file mode 100644
index 0000000..6789d788
--- /dev/null
+++ b/tools/perf/util/include/asm/alternative-asm.h
@@ -0,0 +1,8 @@
+#ifndef _PERF_ASM_ALTERNATIVE_ASM_H
+#define _PERF_ASM_ALTERNATIVE_ASM_H
+
+/* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */
+
+#define altinstruction_entry #
+
+#endif
diff --git a/tools/perf/util/include/linux/list.h b/tools/perf/util/include/linux/list.h
index 356c7e4..99358d6 100644
--- a/tools/perf/util/include/linux/list.h
+++ b/tools/perf/util/include/linux/list.h
@@ -23,5 +23,5 @@
* @head: the head for your list.
*/
#define list_for_each_from(pos, head) \
- for (; prefetch(pos->next), pos != (head); pos = pos->next)
+ for (; pos != (head); pos = pos->next)
#endif
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 952b4ae..41982c3 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -31,34 +31,36 @@
#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
static struct event_symbol event_symbols[] = {
- { CHW(CPU_CYCLES), "cpu-cycles", "cycles" },
- { CHW(INSTRUCTIONS), "instructions", "" },
- { CHW(CACHE_REFERENCES), "cache-references", "" },
- { CHW(CACHE_MISSES), "cache-misses", "" },
- { CHW(BRANCH_INSTRUCTIONS), "branch-instructions", "branches" },
- { CHW(BRANCH_MISSES), "branch-misses", "" },
- { CHW(BUS_CYCLES), "bus-cycles", "" },
+ { CHW(CPU_CYCLES), "cpu-cycles", "cycles" },
+ { CHW(STALLED_CYCLES_FRONTEND), "stalled-cycles-frontend", "idle-cycles-frontend" },
+ { CHW(STALLED_CYCLES_BACKEND), "stalled-cycles-backend", "idle-cycles-backend" },
+ { CHW(INSTRUCTIONS), "instructions", "" },
+ { CHW(CACHE_REFERENCES), "cache-references", "" },
+ { CHW(CACHE_MISSES), "cache-misses", "" },
+ { CHW(BRANCH_INSTRUCTIONS), "branch-instructions", "branches" },
+ { CHW(BRANCH_MISSES), "branch-misses", "" },
+ { CHW(BUS_CYCLES), "bus-cycles", "" },
- { CSW(CPU_CLOCK), "cpu-clock", "" },
- { CSW(TASK_CLOCK), "task-clock", "" },
- { CSW(PAGE_FAULTS), "page-faults", "faults" },
- { CSW(PAGE_FAULTS_MIN), "minor-faults", "" },
- { CSW(PAGE_FAULTS_MAJ), "major-faults", "" },
- { CSW(CONTEXT_SWITCHES), "context-switches", "cs" },
- { CSW(CPU_MIGRATIONS), "cpu-migrations", "migrations" },
- { CSW(ALIGNMENT_FAULTS), "alignment-faults", "" },
- { CSW(EMULATION_FAULTS), "emulation-faults", "" },
+ { CSW(CPU_CLOCK), "cpu-clock", "" },
+ { CSW(TASK_CLOCK), "task-clock", "" },
+ { CSW(PAGE_FAULTS), "page-faults", "faults" },
+ { CSW(PAGE_FAULTS_MIN), "minor-faults", "" },
+ { CSW(PAGE_FAULTS_MAJ), "major-faults", "" },
+ { CSW(CONTEXT_SWITCHES), "context-switches", "cs" },
+ { CSW(CPU_MIGRATIONS), "cpu-migrations", "migrations" },
+ { CSW(ALIGNMENT_FAULTS), "alignment-faults", "" },
+ { CSW(EMULATION_FAULTS), "emulation-faults", "" },
};
#define __PERF_EVENT_FIELD(config, name) \
((config & PERF_EVENT_##name##_MASK) >> PERF_EVENT_##name##_SHIFT)
-#define PERF_EVENT_RAW(config) __PERF_EVENT_FIELD(config, RAW)
+#define PERF_EVENT_RAW(config) __PERF_EVENT_FIELD(config, RAW)
#define PERF_EVENT_CONFIG(config) __PERF_EVENT_FIELD(config, CONFIG)
-#define PERF_EVENT_TYPE(config) __PERF_EVENT_FIELD(config, TYPE)
+#define PERF_EVENT_TYPE(config) __PERF_EVENT_FIELD(config, TYPE)
#define PERF_EVENT_ID(config) __PERF_EVENT_FIELD(config, EVENT)
-static const char *hw_event_names[] = {
+static const char *hw_event_names[PERF_COUNT_HW_MAX] = {
"cycles",
"instructions",
"cache-references",
@@ -66,11 +68,13 @@
"branches",
"branch-misses",
"bus-cycles",
+ "stalled-cycles-frontend",
+ "stalled-cycles-backend",
};
-static const char *sw_event_names[] = {
- "cpu-clock-msecs",
- "task-clock-msecs",
+static const char *sw_event_names[PERF_COUNT_SW_MAX] = {
+ "cpu-clock",
+ "task-clock",
"page-faults",
"context-switches",
"CPU-migrations",
@@ -307,7 +311,7 @@
switch (type) {
case PERF_TYPE_HARDWARE:
- if (config < PERF_COUNT_HW_MAX)
+ if (config < PERF_COUNT_HW_MAX && hw_event_names[config])
return hw_event_names[config];
return "unknown-hardware";
@@ -333,7 +337,7 @@
}
case PERF_TYPE_SOFTWARE:
- if (config < PERF_COUNT_SW_MAX)
+ if (config < PERF_COUNT_SW_MAX && sw_event_names[config])
return sw_event_names[config];
return "unknown-software";
@@ -648,13 +652,15 @@
int n;
n = strlen(event_symbols[i].symbol);
- if (!strncmp(str, event_symbols[i].symbol, n))
+ if (!strncasecmp(str, event_symbols[i].symbol, n))
return n;
n = strlen(event_symbols[i].alias);
- if (n)
- if (!strncmp(str, event_symbols[i].alias, n))
+ if (n) {
+ if (!strncasecmp(str, event_symbols[i].alias, n))
return n;
+ }
+
return 0;
}
@@ -718,15 +724,22 @@
return EVT_FAILED;
}
-static enum event_result
+static int
parse_event_modifier(const char **strp, struct perf_event_attr *attr)
{
const char *str = *strp;
int exclude = 0;
int eu = 0, ek = 0, eh = 0, precise = 0;
- if (*str++ != ':')
+ if (!*str)
return 0;
+
+ if (*str == ',')
+ return 0;
+
+ if (*str++ != ':')
+ return -1;
+
while (*str) {
if (*str == 'u') {
if (!exclude)
@@ -747,14 +760,16 @@
++str;
}
- if (str >= *strp + 2) {
- *strp = str;
- attr->exclude_user = eu;
- attr->exclude_kernel = ek;
- attr->exclude_hv = eh;
- attr->precise_ip = precise;
- return 1;
- }
+ if (str < *strp + 2)
+ return -1;
+
+ *strp = str;
+
+ attr->exclude_user = eu;
+ attr->exclude_kernel = ek;
+ attr->exclude_hv = eh;
+ attr->precise_ip = precise;
+
return 0;
}
@@ -797,7 +812,12 @@
return EVT_FAILED;
modifier:
- parse_event_modifier(str, attr);
+ if (parse_event_modifier(str, attr) < 0) {
+ fprintf(stderr, "invalid event modifier: '%s'\n", *str);
+ fprintf(stderr, "Run 'perf list' for a list of valid events and modifiers\n");
+
+ return EVT_FAILED;
+ }
return ret;
}
@@ -912,7 +932,7 @@
snprintf(evt_path, MAXPATHLEN, "%s:%s",
sys_dirent.d_name, evt_dirent.d_name);
- printf(" %-42s [%s]\n", evt_path,
+ printf(" %-50s [%s]\n", evt_path,
event_type_descriptors[PERF_TYPE_TRACEPOINT]);
}
closedir(evt_dir);
@@ -977,7 +997,7 @@
else
snprintf(name, sizeof(name), "%s", syms->symbol);
- printf(" %-42s [%s]\n", name,
+ printf(" %-50s [%s]\n", name,
event_type_descriptors[type]);
}
}
@@ -995,11 +1015,10 @@
for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
char *name = event_cache_name(type, op, i);
- if (event_glob != NULL &&
- !strglobmatch(name, event_glob))
+ if (event_glob != NULL && !strglobmatch(name, event_glob))
continue;
- printf(" %-42s [%s]\n", name,
+ printf(" %-50s [%s]\n", name,
event_type_descriptors[PERF_TYPE_HW_CACHE]);
++printed;
}
@@ -1009,14 +1028,16 @@
return printed;
}
+#define MAX_NAME_LEN 100
+
/*
* Print the help text for the event symbols:
*/
void print_events(const char *event_glob)
{
- struct event_symbol *syms = event_symbols;
unsigned int i, type, prev_type = -1, printed = 0, ntypes_printed = 0;
- char name[40];
+ struct event_symbol *syms = event_symbols;
+ char name[MAX_NAME_LEN];
printf("\n");
printf("List of pre-defined events (to be used in -e):\n");
@@ -1036,10 +1057,10 @@
continue;
if (strlen(syms->alias))
- sprintf(name, "%s OR %s", syms->symbol, syms->alias);
+ snprintf(name, MAX_NAME_LEN, "%s OR %s", syms->symbol, syms->alias);
else
- strcpy(name, syms->symbol);
- printf(" %-42s [%s]\n", name,
+ strncpy(name, syms->symbol, MAX_NAME_LEN);
+ printf(" %-50s [%s]\n", name,
event_type_descriptors[type]);
prev_type = type;
@@ -1056,12 +1077,12 @@
return;
printf("\n");
- printf(" %-42s [%s]\n",
+ printf(" %-50s [%s]\n",
"rNNN (see 'perf list --help' on how to encode it)",
event_type_descriptors[PERF_TYPE_RAW]);
printf("\n");
- printf(" %-42s [%s]\n",
+ printf(" %-50s [%s]\n",
"mem:<addr>[:access]",
event_type_descriptors[PERF_TYPE_BREAKPOINT]);
printf("\n");
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index b7c85ce..3b9d0b8 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1471,6 +1471,38 @@
return _param.retval;
}
+struct pubname_callback_param {
+ char *function;
+ char *file;
+ Dwarf_Die *cu_die;
+ Dwarf_Die *sp_die;
+ int found;
+};
+
+static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data)
+{
+ struct pubname_callback_param *param = data;
+
+ if (dwarf_offdie(dbg, gl->die_offset, param->sp_die)) {
+ if (dwarf_tag(param->sp_die) != DW_TAG_subprogram)
+ return DWARF_CB_OK;
+
+ if (die_compare_name(param->sp_die, param->function)) {
+ if (!dwarf_offdie(dbg, gl->cu_offset, param->cu_die))
+ return DWARF_CB_OK;
+
+ if (param->file &&
+ strtailcmp(param->file, dwarf_decl_file(param->sp_die)))
+ return DWARF_CB_OK;
+
+ param->found = 1;
+ return DWARF_CB_ABORT;
+ }
+ }
+
+ return DWARF_CB_OK;
+}
+
/* Find probe points from debuginfo */
static int find_probes(int fd, struct probe_finder *pf)
{
@@ -1498,6 +1530,28 @@
off = 0;
line_list__init(&pf->lcache);
+
+ /* Fastpath: lookup by function name from .debug_pubnames section */
+ if (pp->function) {
+ struct pubname_callback_param pubname_param = {
+ .function = pp->function,
+ .file = pp->file,
+ .cu_die = &pf->cu_die,
+ .sp_die = &pf->sp_die,
+ .found = 0,
+ };
+ struct dwarf_callback_param probe_param = {
+ .data = pf,
+ };
+
+ dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0);
+ if (pubname_param.found) {
+ ret = probe_point_search_cb(&pf->sp_die, &probe_param);
+ if (ret)
+ goto found;
+ }
+ }
+
/* Loop on CUs (Compilation Unit) */
while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
/* Get the DIE(Debugging Information Entry) of this CU */
@@ -1525,6 +1579,8 @@
}
off = noff;
}
+
+found:
line_list__free(&pf->lcache);
if (dwfl)
dwfl_end(dwfl);
@@ -1946,6 +2002,22 @@
return -EBADF;
}
+ /* Fastpath: lookup by function name from .debug_pubnames section */
+ if (lr->function) {
+ struct pubname_callback_param pubname_param = {
+ .function = lr->function, .file = lr->file,
+ .cu_die = &lf.cu_die, .sp_die = &lf.sp_die, .found = 0};
+ struct dwarf_callback_param line_range_param = {
+ .data = (void *)&lf, .retval = 0};
+
+ dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0);
+ if (pubname_param.found) {
+ line_range_search_cb(&lf.sp_die, &line_range_param);
+ if (lf.found)
+ goto found;
+ }
+ }
+
/* Loop on CUs (Compilation Unit) */
while (!lf.found && ret >= 0) {
if (dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) != 0)
@@ -1974,6 +2046,7 @@
off = noff;
}
+found:
/* Store comp_dir */
if (lf.found) {
comp_dir = cu_get_comp_dir(&lf.cu_die);
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index beaefc3..605730a 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -49,6 +49,7 @@
Dwarf_Addr addr; /* Address */
const char *fname; /* Real file name */
Dwarf_Die cu_die; /* Current CU */
+ Dwarf_Die sp_die;
struct list_head lcache; /* Line cache for lazy match */
/* For variable searching */
@@ -83,6 +84,7 @@
int lno_s; /* Start line number */
int lno_e; /* End line number */
Dwarf_Die cu_die; /* Current CU */
+ Dwarf_Die sp_die;
int found;
};
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index f5e3845..b5c7d81 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -680,7 +680,7 @@
&cpu, &sample_id_all))
return NULL;
- event = perf_evlist__read_on_cpu(evlist, cpu);
+ event = perf_evlist__mmap_read(evlist, cpu);
if (event != NULL) {
struct perf_evsel *first;
PyObject *pyevent = pyrf_event__new(event);
@@ -810,6 +810,9 @@
{ "COUNT_HW_CACHE_RESULT_ACCESS", PERF_COUNT_HW_CACHE_RESULT_ACCESS },
{ "COUNT_HW_CACHE_RESULT_MISS", PERF_COUNT_HW_CACHE_RESULT_MISS },
+ { "COUNT_HW_STALLED_CYCLES_FRONTEND", PERF_COUNT_HW_STALLED_CYCLES_FRONTEND },
+ { "COUNT_HW_STALLED_CYCLES_BACKEND", PERF_COUNT_HW_STALLED_CYCLES_BACKEND },
+
{ "COUNT_SW_CPU_CLOCK", PERF_COUNT_SW_CPU_CLOCK },
{ "COUNT_SW_TASK_CLOCK", PERF_COUNT_SW_TASK_CLOCK },
{ "COUNT_SW_PAGE_FAULTS", PERF_COUNT_SW_PAGE_FAULTS },
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index caa2245..fff6674 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1156,6 +1156,18 @@
return ret;
}
+struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
+ unsigned int type)
+{
+ struct perf_evsel *pos;
+
+ list_for_each_entry(pos, &session->evlist->entries, node) {
+ if (pos->attr.type == type)
+ return pos;
+ }
+ return NULL;
+}
+
void perf_session__print_symbols(union perf_event *event,
struct perf_sample *sample,
struct perf_session *session)
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 1ac481f..8daaa2d 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -162,6 +162,9 @@
session->sample_id_all, sample);
}
+struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
+ unsigned int type);
+
void perf_session__print_symbols(union perf_event *event,
struct perf_sample *sample,
struct perf_session *session);
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index f06c10f..516876d 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -31,13 +31,13 @@
#define NT_GNU_BUILD_ID 3
#endif
-static bool dso__build_id_equal(const struct dso *self, u8 *build_id);
+static bool dso__build_id_equal(const struct dso *dso, u8 *build_id);
static int elf_read_build_id(Elf *elf, void *bf, size_t size);
static void dsos__add(struct list_head *head, struct dso *dso);
static struct map *map__new2(u64 start, struct dso *dso, enum map_type type);
-static int dso__load_kernel_sym(struct dso *self, struct map *map,
+static int dso__load_kernel_sym(struct dso *dso, struct map *map,
symbol_filter_t filter);
-static int dso__load_guest_kernel_sym(struct dso *self, struct map *map,
+static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map,
symbol_filter_t filter);
static int vmlinux_path__nr_entries;
static char **vmlinux_path;
@@ -49,27 +49,27 @@
.symfs = "",
};
-int dso__name_len(const struct dso *self)
+int dso__name_len(const struct dso *dso)
{
if (verbose)
- return self->long_name_len;
+ return dso->long_name_len;
- return self->short_name_len;
+ return dso->short_name_len;
}
-bool dso__loaded(const struct dso *self, enum map_type type)
+bool dso__loaded(const struct dso *dso, enum map_type type)
{
- return self->loaded & (1 << type);
+ return dso->loaded & (1 << type);
}
-bool dso__sorted_by_name(const struct dso *self, enum map_type type)
+bool dso__sorted_by_name(const struct dso *dso, enum map_type type)
{
- return self->sorted_by_name & (1 << type);
+ return dso->sorted_by_name & (1 << type);
}
-static void dso__set_sorted_by_name(struct dso *self, enum map_type type)
+static void dso__set_sorted_by_name(struct dso *dso, enum map_type type)
{
- self->sorted_by_name |= (1 << type);
+ dso->sorted_by_name |= (1 << type);
}
bool symbol_type__is_a(char symbol_type, enum map_type map_type)
@@ -84,9 +84,9 @@
}
}
-static void symbols__fixup_end(struct rb_root *self)
+static void symbols__fixup_end(struct rb_root *symbols)
{
- struct rb_node *nd, *prevnd = rb_first(self);
+ struct rb_node *nd, *prevnd = rb_first(symbols);
struct symbol *curr, *prev;
if (prevnd == NULL)
@@ -107,10 +107,10 @@
curr->end = roundup(curr->start, 4096);
}
-static void __map_groups__fixup_end(struct map_groups *self, enum map_type type)
+static void __map_groups__fixup_end(struct map_groups *mg, enum map_type type)
{
struct map *prev, *curr;
- struct rb_node *nd, *prevnd = rb_first(&self->maps[type]);
+ struct rb_node *nd, *prevnd = rb_first(&mg->maps[type]);
if (prevnd == NULL)
return;
@@ -130,128 +130,128 @@
curr->end = ~0ULL;
}
-static void map_groups__fixup_end(struct map_groups *self)
+static void map_groups__fixup_end(struct map_groups *mg)
{
int i;
for (i = 0; i < MAP__NR_TYPES; ++i)
- __map_groups__fixup_end(self, i);
+ __map_groups__fixup_end(mg, i);
}
static struct symbol *symbol__new(u64 start, u64 len, u8 binding,
const char *name)
{
size_t namelen = strlen(name) + 1;
- struct symbol *self = calloc(1, (symbol_conf.priv_size +
- sizeof(*self) + namelen));
- if (self == NULL)
+ struct symbol *sym = calloc(1, (symbol_conf.priv_size +
+ sizeof(*sym) + namelen));
+ if (sym == NULL)
return NULL;
if (symbol_conf.priv_size)
- self = ((void *)self) + symbol_conf.priv_size;
+ sym = ((void *)sym) + symbol_conf.priv_size;
- self->start = start;
- self->end = len ? start + len - 1 : start;
- self->binding = binding;
- self->namelen = namelen - 1;
+ sym->start = start;
+ sym->end = len ? start + len - 1 : start;
+ sym->binding = binding;
+ sym->namelen = namelen - 1;
- pr_debug4("%s: %s %#" PRIx64 "-%#" PRIx64 "\n", __func__, name, start, self->end);
+ pr_debug4("%s: %s %#" PRIx64 "-%#" PRIx64 "\n",
+ __func__, name, start, sym->end);
+ memcpy(sym->name, name, namelen);
- memcpy(self->name, name, namelen);
-
- return self;
+ return sym;
}
-void symbol__delete(struct symbol *self)
+void symbol__delete(struct symbol *sym)
{
- free(((void *)self) - symbol_conf.priv_size);
+ free(((void *)sym) - symbol_conf.priv_size);
}
-static size_t symbol__fprintf(struct symbol *self, FILE *fp)
+static size_t symbol__fprintf(struct symbol *sym, FILE *fp)
{
return fprintf(fp, " %" PRIx64 "-%" PRIx64 " %c %s\n",
- self->start, self->end,
- self->binding == STB_GLOBAL ? 'g' :
- self->binding == STB_LOCAL ? 'l' : 'w',
- self->name);
+ sym->start, sym->end,
+ sym->binding == STB_GLOBAL ? 'g' :
+ sym->binding == STB_LOCAL ? 'l' : 'w',
+ sym->name);
}
-void dso__set_long_name(struct dso *self, char *name)
+void dso__set_long_name(struct dso *dso, char *name)
{
if (name == NULL)
return;
- self->long_name = name;
- self->long_name_len = strlen(name);
+ dso->long_name = name;
+ dso->long_name_len = strlen(name);
}
-static void dso__set_short_name(struct dso *self, const char *name)
+static void dso__set_short_name(struct dso *dso, const char *name)
{
if (name == NULL)
return;
- self->short_name = name;
- self->short_name_len = strlen(name);
+ dso->short_name = name;
+ dso->short_name_len = strlen(name);
}
-static void dso__set_basename(struct dso *self)
+static void dso__set_basename(struct dso *dso)
{
- dso__set_short_name(self, basename(self->long_name));
+ dso__set_short_name(dso, basename(dso->long_name));
}
struct dso *dso__new(const char *name)
{
- struct dso *self = calloc(1, sizeof(*self) + strlen(name) + 1);
+ struct dso *dso = calloc(1, sizeof(*dso) + strlen(name) + 1);
- if (self != NULL) {
+ if (dso != NULL) {
int i;
- strcpy(self->name, name);
- dso__set_long_name(self, self->name);
- dso__set_short_name(self, self->name);
+ strcpy(dso->name, name);
+ dso__set_long_name(dso, dso->name);
+ dso__set_short_name(dso, dso->name);
for (i = 0; i < MAP__NR_TYPES; ++i)
- self->symbols[i] = self->symbol_names[i] = RB_ROOT;
- self->symtab_type = SYMTAB__NOT_FOUND;
- self->loaded = 0;
- self->sorted_by_name = 0;
- self->has_build_id = 0;
- self->kernel = DSO_TYPE_USER;
- INIT_LIST_HEAD(&self->node);
+ dso->symbols[i] = dso->symbol_names[i] = RB_ROOT;
+ dso->symtab_type = SYMTAB__NOT_FOUND;
+ dso->loaded = 0;
+ dso->sorted_by_name = 0;
+ dso->has_build_id = 0;
+ dso->kernel = DSO_TYPE_USER;
+ INIT_LIST_HEAD(&dso->node);
}
- return self;
+ return dso;
}
-static void symbols__delete(struct rb_root *self)
+static void symbols__delete(struct rb_root *symbols)
{
struct symbol *pos;
- struct rb_node *next = rb_first(self);
+ struct rb_node *next = rb_first(symbols);
while (next) {
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
- rb_erase(&pos->rb_node, self);
+ rb_erase(&pos->rb_node, symbols);
symbol__delete(pos);
}
}
-void dso__delete(struct dso *self)
+void dso__delete(struct dso *dso)
{
int i;
for (i = 0; i < MAP__NR_TYPES; ++i)
- symbols__delete(&self->symbols[i]);
- if (self->sname_alloc)
- free((char *)self->short_name);
- if (self->lname_alloc)
- free(self->long_name);
- free(self);
+ symbols__delete(&dso->symbols[i]);
+ if (dso->sname_alloc)
+ free((char *)dso->short_name);
+ if (dso->lname_alloc)
+ free(dso->long_name);
+ free(dso);
}
-void dso__set_build_id(struct dso *self, void *build_id)
+void dso__set_build_id(struct dso *dso, void *build_id)
{
- memcpy(self->build_id, build_id, sizeof(self->build_id));
- self->has_build_id = 1;
+ memcpy(dso->build_id, build_id, sizeof(dso->build_id));
+ dso->has_build_id = 1;
}
-static void symbols__insert(struct rb_root *self, struct symbol *sym)
+static void symbols__insert(struct rb_root *symbols, struct symbol *sym)
{
- struct rb_node **p = &self->rb_node;
+ struct rb_node **p = &symbols->rb_node;
struct rb_node *parent = NULL;
const u64 ip = sym->start;
struct symbol *s;
@@ -265,17 +265,17 @@
p = &(*p)->rb_right;
}
rb_link_node(&sym->rb_node, parent, p);
- rb_insert_color(&sym->rb_node, self);
+ rb_insert_color(&sym->rb_node, symbols);
}
-static struct symbol *symbols__find(struct rb_root *self, u64 ip)
+static struct symbol *symbols__find(struct rb_root *symbols, u64 ip)
{
struct rb_node *n;
- if (self == NULL)
+ if (symbols == NULL)
return NULL;
- n = self->rb_node;
+ n = symbols->rb_node;
while (n) {
struct symbol *s = rb_entry(n, struct symbol, rb_node);
@@ -296,9 +296,9 @@
struct symbol sym;
};
-static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
+static void symbols__insert_by_name(struct rb_root *symbols, struct symbol *sym)
{
- struct rb_node **p = &self->rb_node;
+ struct rb_node **p = &symbols->rb_node;
struct rb_node *parent = NULL;
struct symbol_name_rb_node *symn, *s;
@@ -313,27 +313,29 @@
p = &(*p)->rb_right;
}
rb_link_node(&symn->rb_node, parent, p);
- rb_insert_color(&symn->rb_node, self);
+ rb_insert_color(&symn->rb_node, symbols);
}
-static void symbols__sort_by_name(struct rb_root *self, struct rb_root *source)
+static void symbols__sort_by_name(struct rb_root *symbols,
+ struct rb_root *source)
{
struct rb_node *nd;
for (nd = rb_first(source); nd; nd = rb_next(nd)) {
struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
- symbols__insert_by_name(self, pos);
+ symbols__insert_by_name(symbols, pos);
}
}
-static struct symbol *symbols__find_by_name(struct rb_root *self, const char *name)
+static struct symbol *symbols__find_by_name(struct rb_root *symbols,
+ const char *name)
{
struct rb_node *n;
- if (self == NULL)
+ if (symbols == NULL)
return NULL;
- n = self->rb_node;
+ n = symbols->rb_node;
while (n) {
struct symbol_name_rb_node *s;
@@ -353,29 +355,29 @@
return NULL;
}
-struct symbol *dso__find_symbol(struct dso *self,
+struct symbol *dso__find_symbol(struct dso *dso,
enum map_type type, u64 addr)
{
- return symbols__find(&self->symbols[type], addr);
+ return symbols__find(&dso->symbols[type], addr);
}
-struct symbol *dso__find_symbol_by_name(struct dso *self, enum map_type type,
+struct symbol *dso__find_symbol_by_name(struct dso *dso, enum map_type type,
const char *name)
{
- return symbols__find_by_name(&self->symbol_names[type], name);
+ return symbols__find_by_name(&dso->symbol_names[type], name);
}
-void dso__sort_by_name(struct dso *self, enum map_type type)
+void dso__sort_by_name(struct dso *dso, enum map_type type)
{
- dso__set_sorted_by_name(self, type);
- return symbols__sort_by_name(&self->symbol_names[type],
- &self->symbols[type]);
+ dso__set_sorted_by_name(dso, type);
+ return symbols__sort_by_name(&dso->symbol_names[type],
+ &dso->symbols[type]);
}
-int build_id__sprintf(const u8 *self, int len, char *bf)
+int build_id__sprintf(const u8 *build_id, int len, char *bf)
{
char *bid = bf;
- const u8 *raw = self;
+ const u8 *raw = build_id;
int i;
for (i = 0; i < len; ++i) {
@@ -384,24 +386,25 @@
bid += 2;
}
- return raw - self;
+ return raw - build_id;
}
-size_t dso__fprintf_buildid(struct dso *self, FILE *fp)
+size_t dso__fprintf_buildid(struct dso *dso, FILE *fp)
{
char sbuild_id[BUILD_ID_SIZE * 2 + 1];
- build_id__sprintf(self->build_id, sizeof(self->build_id), sbuild_id);
+ build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
return fprintf(fp, "%s", sbuild_id);
}
-size_t dso__fprintf_symbols_by_name(struct dso *self, enum map_type type, FILE *fp)
+size_t dso__fprintf_symbols_by_name(struct dso *dso,
+ enum map_type type, FILE *fp)
{
size_t ret = 0;
struct rb_node *nd;
struct symbol_name_rb_node *pos;
- for (nd = rb_first(&self->symbol_names[type]); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&dso->symbol_names[type]); nd; nd = rb_next(nd)) {
pos = rb_entry(nd, struct symbol_name_rb_node, rb_node);
fprintf(fp, "%s\n", pos->sym.name);
}
@@ -409,18 +412,18 @@
return ret;
}
-size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp)
+size_t dso__fprintf(struct dso *dso, enum map_type type, FILE *fp)
{
struct rb_node *nd;
- size_t ret = fprintf(fp, "dso: %s (", self->short_name);
+ size_t ret = fprintf(fp, "dso: %s (", dso->short_name);
- if (self->short_name != self->long_name)
- ret += fprintf(fp, "%s, ", self->long_name);
+ if (dso->short_name != dso->long_name)
+ ret += fprintf(fp, "%s, ", dso->long_name);
ret += fprintf(fp, "%s, %sloaded, ", map_type__name[type],
- self->loaded ? "" : "NOT ");
- ret += dso__fprintf_buildid(self, fp);
+ dso->loaded ? "" : "NOT ");
+ ret += dso__fprintf_buildid(dso, fp);
ret += fprintf(fp, ")\n");
- for (nd = rb_first(&self->symbols[type]); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&dso->symbols[type]); nd; nd = rb_next(nd)) {
struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
ret += symbol__fprintf(pos, fp);
}
@@ -543,10 +546,10 @@
* so that we can in the next step set the symbol ->end address and then
* call kernel_maps__split_kallsyms.
*/
-static int dso__load_all_kallsyms(struct dso *self, const char *filename,
+static int dso__load_all_kallsyms(struct dso *dso, const char *filename,
struct map *map)
{
- struct process_kallsyms_args args = { .map = map, .dso = self, };
+ struct process_kallsyms_args args = { .map = map, .dso = dso, };
return kallsyms__parse(filename, &args, map__process_kallsym_symbol);
}
@@ -555,7 +558,7 @@
* kernel range is broken in several maps, named [kernel].N, as we don't have
* the original ELF section names vmlinux have.
*/
-static int dso__split_kallsyms(struct dso *self, struct map *map,
+static int dso__split_kallsyms(struct dso *dso, struct map *map,
symbol_filter_t filter)
{
struct map_groups *kmaps = map__kmap(map)->kmaps;
@@ -563,7 +566,7 @@
struct map *curr_map = map;
struct symbol *pos;
int count = 0, moved = 0;
- struct rb_root *root = &self->symbols[map->type];
+ struct rb_root *root = &dso->symbols[map->type];
struct rb_node *next = rb_first(root);
int kernel_range = 0;
@@ -582,7 +585,7 @@
if (strcmp(curr_map->dso->short_name, module)) {
if (curr_map != map &&
- self->kernel == DSO_TYPE_GUEST_KERNEL &&
+ dso->kernel == DSO_TYPE_GUEST_KERNEL &&
machine__is_default_guest(machine)) {
/*
* We assume all symbols of a module are
@@ -618,14 +621,14 @@
pos->end = curr_map->map_ip(curr_map, pos->end);
} else if (curr_map != map) {
char dso_name[PATH_MAX];
- struct dso *dso;
+ struct dso *ndso;
if (count == 0) {
curr_map = map;
goto filter_symbol;
}
- if (self->kernel == DSO_TYPE_GUEST_KERNEL)
+ if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
kernel_range++);
@@ -634,15 +637,15 @@
"[kernel].%d",
kernel_range++);
- dso = dso__new(dso_name);
- if (dso == NULL)
+ ndso = dso__new(dso_name);
+ if (ndso == NULL)
return -1;
- dso->kernel = self->kernel;
+ ndso->kernel = dso->kernel;
- curr_map = map__new2(pos->start, dso, map->type);
+ curr_map = map__new2(pos->start, ndso, map->type);
if (curr_map == NULL) {
- dso__delete(dso);
+ dso__delete(ndso);
return -1;
}
@@ -665,7 +668,7 @@
}
if (curr_map != map &&
- self->kernel == DSO_TYPE_GUEST_KERNEL &&
+ dso->kernel == DSO_TYPE_GUEST_KERNEL &&
machine__is_default_guest(kmaps->machine)) {
dso__set_loaded(curr_map->dso, curr_map->type);
}
@@ -673,21 +676,21 @@
return count + moved;
}
-int dso__load_kallsyms(struct dso *self, const char *filename,
+int dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map, symbol_filter_t filter)
{
- if (dso__load_all_kallsyms(self, filename, map) < 0)
+ if (dso__load_all_kallsyms(dso, filename, map) < 0)
return -1;
- if (self->kernel == DSO_TYPE_GUEST_KERNEL)
- self->symtab_type = SYMTAB__GUEST_KALLSYMS;
+ if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
+ dso->symtab_type = SYMTAB__GUEST_KALLSYMS;
else
- self->symtab_type = SYMTAB__KALLSYMS;
+ dso->symtab_type = SYMTAB__KALLSYMS;
- return dso__split_kallsyms(self, map, filter);
+ return dso__split_kallsyms(dso, map, filter);
}
-static int dso__load_perf_map(struct dso *self, struct map *map,
+static int dso__load_perf_map(struct dso *dso, struct map *map,
symbol_filter_t filter)
{
char *line = NULL;
@@ -695,7 +698,7 @@
FILE *file;
int nr_syms = 0;
- file = fopen(self->long_name, "r");
+ file = fopen(dso->long_name, "r");
if (file == NULL)
goto out_failure;
@@ -733,7 +736,7 @@
if (filter && filter(map, sym))
symbol__delete(sym);
else {
- symbols__insert(&self->symbols[map->type], sym);
+ symbols__insert(&dso->symbols[map->type], sym);
nr_syms++;
}
}
@@ -752,7 +755,7 @@
/**
* elf_symtab__for_each_symbol - iterate thru all the symbols
*
- * @self: struct elf_symtab instance to iterate
+ * @syms: struct elf_symtab instance to iterate
* @idx: uint32_t idx
* @sym: GElf_Sym iterator
*/
@@ -852,7 +855,7 @@
* And always look at the original dso, not at debuginfo packages, that
* have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
*/
-static int dso__synthesize_plt_symbols(struct dso *self, struct map *map,
+static int dso__synthesize_plt_symbols(struct dso *dso, struct map *map,
symbol_filter_t filter)
{
uint32_t nr_rel_entries, idx;
@@ -871,7 +874,7 @@
char name[PATH_MAX];
snprintf(name, sizeof(name), "%s%s",
- symbol_conf.symfs, self->long_name);
+ symbol_conf.symfs, dso->long_name);
fd = open(name, O_RDONLY);
if (fd < 0)
goto out;
@@ -947,7 +950,7 @@
if (filter && filter(map, f))
symbol__delete(f);
else {
- symbols__insert(&self->symbols[map->type], f);
+ symbols__insert(&dso->symbols[map->type], f);
++nr;
}
}
@@ -969,7 +972,7 @@
if (filter && filter(map, f))
symbol__delete(f);
else {
- symbols__insert(&self->symbols[map->type], f);
+ symbols__insert(&dso->symbols[map->type], f);
++nr;
}
}
@@ -985,29 +988,30 @@
return nr;
out:
pr_debug("%s: problems reading %s PLT info.\n",
- __func__, self->long_name);
+ __func__, dso->long_name);
return 0;
}
-static bool elf_sym__is_a(GElf_Sym *self, enum map_type type)
+static bool elf_sym__is_a(GElf_Sym *sym, enum map_type type)
{
switch (type) {
case MAP__FUNCTION:
- return elf_sym__is_function(self);
+ return elf_sym__is_function(sym);
case MAP__VARIABLE:
- return elf_sym__is_object(self);
+ return elf_sym__is_object(sym);
default:
return false;
}
}
-static bool elf_sec__is_a(GElf_Shdr *self, Elf_Data *secstrs, enum map_type type)
+static bool elf_sec__is_a(GElf_Shdr *shdr, Elf_Data *secstrs,
+ enum map_type type)
{
switch (type) {
case MAP__FUNCTION:
- return elf_sec__is_text(self, secstrs);
+ return elf_sec__is_text(shdr, secstrs);
case MAP__VARIABLE:
- return elf_sec__is_data(self, secstrs);
+ return elf_sec__is_data(shdr, secstrs);
default:
return false;
}
@@ -1032,13 +1036,13 @@
return -1;
}
-static int dso__load_sym(struct dso *self, struct map *map, const char *name,
+static int dso__load_sym(struct dso *dso, struct map *map, const char *name,
int fd, symbol_filter_t filter, int kmodule,
int want_symtab)
{
- struct kmap *kmap = self->kernel ? map__kmap(map) : NULL;
+ struct kmap *kmap = dso->kernel ? map__kmap(map) : NULL;
struct map *curr_map = map;
- struct dso *curr_dso = self;
+ struct dso *curr_dso = dso;
Elf_Data *symstrs, *secstrs;
uint32_t nr_syms;
int err = -1;
@@ -1064,14 +1068,14 @@
}
/* Always reject images with a mismatched build-id: */
- if (self->has_build_id) {
+ if (dso->has_build_id) {
u8 build_id[BUILD_ID_SIZE];
if (elf_read_build_id(elf, build_id,
BUILD_ID_SIZE) != BUILD_ID_SIZE)
goto out_elf_end;
- if (!dso__build_id_equal(self, build_id))
+ if (!dso__build_id_equal(dso, build_id))
goto out_elf_end;
}
@@ -1112,13 +1116,14 @@
nr_syms = shdr.sh_size / shdr.sh_entsize;
memset(&sym, 0, sizeof(sym));
- if (self->kernel == DSO_TYPE_USER) {
- self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+ if (dso->kernel == DSO_TYPE_USER) {
+ dso->adjust_symbols = (ehdr.e_type == ET_EXEC ||
elf_section_by_name(elf, &ehdr, &shdr,
".gnu.prelink_undo",
NULL) != NULL);
- } else self->adjust_symbols = 0;
-
+ } else {
+ dso->adjust_symbols = 0;
+ }
elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) {
struct symbol *f;
const char *elf_name = elf_sym__name(&sym, symstrs);
@@ -1168,22 +1173,22 @@
(sym.st_value & 1))
--sym.st_value;
- if (self->kernel != DSO_TYPE_USER || kmodule) {
+ if (dso->kernel != DSO_TYPE_USER || kmodule) {
char dso_name[PATH_MAX];
if (strcmp(section_name,
(curr_dso->short_name +
- self->short_name_len)) == 0)
+ dso->short_name_len)) == 0)
goto new_symbol;
if (strcmp(section_name, ".text") == 0) {
curr_map = map;
- curr_dso = self;
+ curr_dso = dso;
goto new_symbol;
}
snprintf(dso_name, sizeof(dso_name),
- "%s%s", self->short_name, section_name);
+ "%s%s", dso->short_name, section_name);
curr_map = map_groups__find_by_name(kmap->kmaps, map->type, dso_name);
if (curr_map == NULL) {
@@ -1195,9 +1200,9 @@
curr_dso = dso__new(dso_name);
if (curr_dso == NULL)
goto out_elf_end;
- curr_dso->kernel = self->kernel;
- curr_dso->long_name = self->long_name;
- curr_dso->long_name_len = self->long_name_len;
+ curr_dso->kernel = dso->kernel;
+ curr_dso->long_name = dso->long_name;
+ curr_dso->long_name_len = dso->long_name_len;
curr_map = map__new2(start, curr_dso,
map->type);
if (curr_map == NULL) {
@@ -1206,9 +1211,9 @@
}
curr_map->map_ip = identity__map_ip;
curr_map->unmap_ip = identity__map_ip;
- curr_dso->symtab_type = self->symtab_type;
+ curr_dso->symtab_type = dso->symtab_type;
map_groups__insert(kmap->kmaps, curr_map);
- dsos__add(&self->node, curr_dso);
+ dsos__add(&dso->node, curr_dso);
dso__set_loaded(curr_dso, map->type);
} else
curr_dso = curr_map->dso;
@@ -1250,7 +1255,7 @@
* For misannotated, zeroed, ASM function sizes.
*/
if (nr > 0) {
- symbols__fixup_end(&self->symbols[map->type]);
+ symbols__fixup_end(&dso->symbols[map->type]);
if (kmap) {
/*
* We need to fixup this here too because we create new
@@ -1266,9 +1271,9 @@
return err;
}
-static bool dso__build_id_equal(const struct dso *self, u8 *build_id)
+static bool dso__build_id_equal(const struct dso *dso, u8 *build_id)
{
- return memcmp(self->build_id, build_id, sizeof(self->build_id)) == 0;
+ return memcmp(dso->build_id, build_id, sizeof(dso->build_id)) == 0;
}
bool __dsos__read_build_ids(struct list_head *head, bool with_hits)
@@ -1429,7 +1434,7 @@
return err;
}
-char dso__symtab_origin(const struct dso *self)
+char dso__symtab_origin(const struct dso *dso)
{
static const char origin[] = {
[SYMTAB__KALLSYMS] = 'k',
@@ -1444,12 +1449,12 @@
[SYMTAB__GUEST_KMODULE] = 'G',
};
- if (self == NULL || self->symtab_type == SYMTAB__NOT_FOUND)
+ if (dso == NULL || dso->symtab_type == SYMTAB__NOT_FOUND)
return '!';
- return origin[self->symtab_type];
+ return origin[dso->symtab_type];
}
-int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
+int dso__load(struct dso *dso, struct map *map, symbol_filter_t filter)
{
int size = PATH_MAX;
char *name;
@@ -1459,12 +1464,12 @@
const char *root_dir;
int want_symtab;
- dso__set_loaded(self, map->type);
+ dso__set_loaded(dso, map->type);
- if (self->kernel == DSO_TYPE_KERNEL)
- return dso__load_kernel_sym(self, map, filter);
- else if (self->kernel == DSO_TYPE_GUEST_KERNEL)
- return dso__load_guest_kernel_sym(self, map, filter);
+ if (dso->kernel == DSO_TYPE_KERNEL)
+ return dso__load_kernel_sym(dso, map, filter);
+ else if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
+ return dso__load_guest_kernel_sym(dso, map, filter);
if (map->groups && map->groups->machine)
machine = map->groups->machine;
@@ -1475,11 +1480,11 @@
if (!name)
return -1;
- self->adjust_symbols = 0;
+ dso->adjust_symbols = 0;
- if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
- ret = dso__load_perf_map(self, map, filter);
- self->symtab_type = ret > 0 ? SYMTAB__JAVA_JIT :
+ if (strncmp(dso->name, "/tmp/perf-", 10) == 0) {
+ ret = dso__load_perf_map(dso, map, filter);
+ dso->symtab_type = ret > 0 ? SYMTAB__JAVA_JIT :
SYMTAB__NOT_FOUND;
return ret;
}
@@ -1490,33 +1495,33 @@
*/
want_symtab = 1;
restart:
- for (self->symtab_type = SYMTAB__BUILD_ID_CACHE;
- self->symtab_type != SYMTAB__NOT_FOUND;
- self->symtab_type++) {
- switch (self->symtab_type) {
+ for (dso->symtab_type = SYMTAB__BUILD_ID_CACHE;
+ dso->symtab_type != SYMTAB__NOT_FOUND;
+ dso->symtab_type++) {
+ switch (dso->symtab_type) {
case SYMTAB__BUILD_ID_CACHE:
/* skip the locally configured cache if a symfs is given */
if (symbol_conf.symfs[0] ||
- (dso__build_id_filename(self, name, size) == NULL)) {
+ (dso__build_id_filename(dso, name, size) == NULL)) {
continue;
}
break;
case SYMTAB__FEDORA_DEBUGINFO:
snprintf(name, size, "%s/usr/lib/debug%s.debug",
- symbol_conf.symfs, self->long_name);
+ symbol_conf.symfs, dso->long_name);
break;
case SYMTAB__UBUNTU_DEBUGINFO:
snprintf(name, size, "%s/usr/lib/debug%s",
- symbol_conf.symfs, self->long_name);
+ symbol_conf.symfs, dso->long_name);
break;
case SYMTAB__BUILDID_DEBUGINFO: {
char build_id_hex[BUILD_ID_SIZE * 2 + 1];
- if (!self->has_build_id)
+ if (!dso->has_build_id)
continue;
- build_id__sprintf(self->build_id,
- sizeof(self->build_id),
+ build_id__sprintf(dso->build_id,
+ sizeof(dso->build_id),
build_id_hex);
snprintf(name, size,
"%s/usr/lib/debug/.build-id/%.2s/%s.debug",
@@ -1525,7 +1530,7 @@
break;
case SYMTAB__SYSTEM_PATH_DSO:
snprintf(name, size, "%s%s",
- symbol_conf.symfs, self->long_name);
+ symbol_conf.symfs, dso->long_name);
break;
case SYMTAB__GUEST_KMODULE:
if (map->groups && machine)
@@ -1533,12 +1538,12 @@
else
root_dir = "";
snprintf(name, size, "%s%s%s", symbol_conf.symfs,
- root_dir, self->long_name);
+ root_dir, dso->long_name);
break;
case SYMTAB__SYSTEM_PATH_KMODULE:
snprintf(name, size, "%s%s", symbol_conf.symfs,
- self->long_name);
+ dso->long_name);
break;
default:;
}
@@ -1548,7 +1553,7 @@
if (fd < 0)
continue;
- ret = dso__load_sym(self, map, name, fd, filter, 0,
+ ret = dso__load_sym(dso, map, name, fd, filter, 0,
want_symtab);
close(fd);
@@ -1560,7 +1565,8 @@
continue;
if (ret > 0) {
- int nr_plt = dso__synthesize_plt_symbols(self, map, filter);
+ int nr_plt = dso__synthesize_plt_symbols(dso, map,
+ filter);
if (nr_plt > 0)
ret += nr_plt;
break;
@@ -1577,17 +1583,17 @@
}
free(name);
- if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
+ if (ret < 0 && strstr(dso->name, " (deleted)") != NULL)
return 0;
return ret;
}
-struct map *map_groups__find_by_name(struct map_groups *self,
+struct map *map_groups__find_by_name(struct map_groups *mg,
enum map_type type, const char *name)
{
struct rb_node *nd;
- for (nd = rb_first(&self->maps[type]); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(&mg->maps[type]); nd; nd = rb_next(nd)) {
struct map *map = rb_entry(nd, struct map, rb_node);
if (map->dso && strcmp(map->dso->short_name, name) == 0)
@@ -1597,28 +1603,28 @@
return NULL;
}
-static int dso__kernel_module_get_build_id(struct dso *self,
- const char *root_dir)
+static int dso__kernel_module_get_build_id(struct dso *dso,
+ const char *root_dir)
{
char filename[PATH_MAX];
/*
* kernel module short names are of the form "[module]" and
* we need just "module" here.
*/
- const char *name = self->short_name + 1;
+ const char *name = dso->short_name + 1;
snprintf(filename, sizeof(filename),
"%s/sys/module/%.*s/notes/.note.gnu.build-id",
root_dir, (int)strlen(name) - 1, name);
- if (sysfs__read_build_id(filename, self->build_id,
- sizeof(self->build_id)) == 0)
- self->has_build_id = true;
+ if (sysfs__read_build_id(filename, dso->build_id,
+ sizeof(dso->build_id)) == 0)
+ dso->has_build_id = true;
return 0;
}
-static int map_groups__set_modules_path_dir(struct map_groups *self,
+static int map_groups__set_modules_path_dir(struct map_groups *mg,
const char *dir_name)
{
struct dirent *dent;
@@ -1646,7 +1652,7 @@
snprintf(path, sizeof(path), "%s/%s",
dir_name, dent->d_name);
- ret = map_groups__set_modules_path_dir(self, path);
+ ret = map_groups__set_modules_path_dir(mg, path);
if (ret < 0)
goto out;
} else {
@@ -1661,7 +1667,8 @@
(int)(dot - dent->d_name), dent->d_name);
strxfrchar(dso_name, '-', '_');
- map = map_groups__find_by_name(self, MAP__FUNCTION, dso_name);
+ map = map_groups__find_by_name(mg, MAP__FUNCTION,
+ dso_name);
if (map == NULL)
continue;
@@ -1711,20 +1718,20 @@
return strdup(name);
}
-static int machine__set_modules_path(struct machine *self)
+static int machine__set_modules_path(struct machine *machine)
{
char *version;
char modules_path[PATH_MAX];
- version = get_kernel_version(self->root_dir);
+ version = get_kernel_version(machine->root_dir);
if (!version)
return -1;
snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s/kernel",
- self->root_dir, version);
+ machine->root_dir, version);
free(version);
- return map_groups__set_modules_path_dir(&self->kmaps, modules_path);
+ return map_groups__set_modules_path_dir(&machine->kmaps, modules_path);
}
/*
@@ -1734,23 +1741,23 @@
*/
static struct map *map__new2(u64 start, struct dso *dso, enum map_type type)
{
- struct map *self = calloc(1, (sizeof(*self) +
- (dso->kernel ? sizeof(struct kmap) : 0)));
- if (self != NULL) {
+ struct map *map = calloc(1, (sizeof(*map) +
+ (dso->kernel ? sizeof(struct kmap) : 0)));
+ if (map != NULL) {
/*
* ->end will be filled after we load all the symbols
*/
- map__init(self, type, start, 0, 0, dso);
+ map__init(map, type, start, 0, 0, dso);
}
- return self;
+ return map;
}
-struct map *machine__new_module(struct machine *self, u64 start,
+struct map *machine__new_module(struct machine *machine, u64 start,
const char *filename)
{
struct map *map;
- struct dso *dso = __dsos__findnew(&self->kernel_dsos, filename);
+ struct dso *dso = __dsos__findnew(&machine->kernel_dsos, filename);
if (dso == NULL)
return NULL;
@@ -1759,15 +1766,15 @@
if (map == NULL)
return NULL;
- if (machine__is_host(self))
+ if (machine__is_host(machine))
dso->symtab_type = SYMTAB__SYSTEM_PATH_KMODULE;
else
dso->symtab_type = SYMTAB__GUEST_KMODULE;
- map_groups__insert(&self->kmaps, map);
+ map_groups__insert(&machine->kmaps, map);
return map;
}
-static int machine__create_modules(struct machine *self)
+static int machine__create_modules(struct machine *machine)
{
char *line = NULL;
size_t n;
@@ -1776,10 +1783,10 @@
const char *modules;
char path[PATH_MAX];
- if (machine__is_default_guest(self))
+ if (machine__is_default_guest(machine))
modules = symbol_conf.default_guest_modules;
else {
- sprintf(path, "%s/proc/modules", self->root_dir);
+ sprintf(path, "%s/proc/modules", machine->root_dir);
modules = path;
}
@@ -1815,16 +1822,16 @@
*sep = '\0';
snprintf(name, sizeof(name), "[%s]", line);
- map = machine__new_module(self, start, name);
+ map = machine__new_module(machine, start, name);
if (map == NULL)
goto out_delete_line;
- dso__kernel_module_get_build_id(map->dso, self->root_dir);
+ dso__kernel_module_get_build_id(map->dso, machine->root_dir);
}
free(line);
fclose(file);
- return machine__set_modules_path(self);
+ return machine__set_modules_path(machine);
out_delete_line:
free(line);
@@ -1832,7 +1839,7 @@
return -1;
}
-int dso__load_vmlinux(struct dso *self, struct map *map,
+int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, symbol_filter_t filter)
{
int err = -1, fd;
@@ -1844,9 +1851,9 @@
if (fd < 0)
return -1;
- dso__set_long_name(self, (char *)vmlinux);
- dso__set_loaded(self, map->type);
- err = dso__load_sym(self, map, symfs_vmlinux, fd, filter, 0, 0);
+ dso__set_long_name(dso, (char *)vmlinux);
+ dso__set_loaded(dso, map->type);
+ err = dso__load_sym(dso, map, symfs_vmlinux, fd, filter, 0, 0);
close(fd);
if (err > 0)
@@ -1855,7 +1862,7 @@
return err;
}
-int dso__load_vmlinux_path(struct dso *self, struct map *map,
+int dso__load_vmlinux_path(struct dso *dso, struct map *map,
symbol_filter_t filter)
{
int i, err = 0;
@@ -1864,20 +1871,20 @@
pr_debug("Looking at the vmlinux_path (%d entries long)\n",
vmlinux_path__nr_entries + 1);
- filename = dso__build_id_filename(self, NULL, 0);
+ filename = dso__build_id_filename(dso, NULL, 0);
if (filename != NULL) {
- err = dso__load_vmlinux(self, map, filename, filter);
+ err = dso__load_vmlinux(dso, map, filename, filter);
if (err > 0) {
- dso__set_long_name(self, filename);
+ dso__set_long_name(dso, filename);
goto out;
}
free(filename);
}
for (i = 0; i < vmlinux_path__nr_entries; ++i) {
- err = dso__load_vmlinux(self, map, vmlinux_path[i], filter);
+ err = dso__load_vmlinux(dso, map, vmlinux_path[i], filter);
if (err > 0) {
- dso__set_long_name(self, strdup(vmlinux_path[i]));
+ dso__set_long_name(dso, strdup(vmlinux_path[i]));
break;
}
}
@@ -1885,7 +1892,7 @@
return err;
}
-static int dso__load_kernel_sym(struct dso *self, struct map *map,
+static int dso__load_kernel_sym(struct dso *dso, struct map *map,
symbol_filter_t filter)
{
int err;
@@ -1912,10 +1919,10 @@
}
if (symbol_conf.vmlinux_name != NULL) {
- err = dso__load_vmlinux(self, map,
+ err = dso__load_vmlinux(dso, map,
symbol_conf.vmlinux_name, filter);
if (err > 0) {
- dso__set_long_name(self,
+ dso__set_long_name(dso,
strdup(symbol_conf.vmlinux_name));
goto out_fixup;
}
@@ -1923,7 +1930,7 @@
}
if (vmlinux_path != NULL) {
- err = dso__load_vmlinux_path(self, map, filter);
+ err = dso__load_vmlinux_path(dso, map, filter);
if (err > 0)
goto out_fixup;
}
@@ -1937,13 +1944,13 @@
* we have a build-id, so check if it is the same as the running kernel,
* using it if it is.
*/
- if (self->has_build_id) {
+ if (dso->has_build_id) {
u8 kallsyms_build_id[BUILD_ID_SIZE];
char sbuild_id[BUILD_ID_SIZE * 2 + 1];
if (sysfs__read_build_id("/sys/kernel/notes", kallsyms_build_id,
sizeof(kallsyms_build_id)) == 0) {
- if (dso__build_id_equal(self, kallsyms_build_id)) {
+ if (dso__build_id_equal(dso, kallsyms_build_id)) {
kallsyms_filename = "/proc/kallsyms";
goto do_kallsyms;
}
@@ -1952,7 +1959,7 @@
* Now look if we have it on the build-id cache in
* $HOME/.debug/[kernel.kallsyms].
*/
- build_id__sprintf(self->build_id, sizeof(self->build_id),
+ build_id__sprintf(dso->build_id, sizeof(dso->build_id),
sbuild_id);
if (asprintf(&kallsyms_allocated_filename,
@@ -1979,7 +1986,7 @@
}
do_kallsyms:
- err = dso__load_kallsyms(self, kallsyms_filename, map, filter);
+ err = dso__load_kallsyms(dso, kallsyms_filename, map, filter);
if (err > 0)
pr_debug("Using %s for symbols\n", kallsyms_filename);
free(kallsyms_allocated_filename);
@@ -1987,7 +1994,7 @@
if (err > 0) {
out_fixup:
if (kallsyms_filename != NULL)
- dso__set_long_name(self, strdup("[kernel.kallsyms]"));
+ dso__set_long_name(dso, strdup("[kernel.kallsyms]"));
map__fixup_start(map);
map__fixup_end(map);
}
@@ -1995,8 +2002,8 @@
return err;
}
-static int dso__load_guest_kernel_sym(struct dso *self, struct map *map,
- symbol_filter_t filter)
+static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map,
+ symbol_filter_t filter)
{
int err;
const char *kallsyms_filename = NULL;
@@ -2016,7 +2023,7 @@
* Or use file guest_kallsyms inputted by user on commandline
*/
if (symbol_conf.default_guest_vmlinux_name != NULL) {
- err = dso__load_vmlinux(self, map,
+ err = dso__load_vmlinux(dso, map,
symbol_conf.default_guest_vmlinux_name, filter);
goto out_try_fixup;
}
@@ -2029,7 +2036,7 @@
kallsyms_filename = path;
}
- err = dso__load_kallsyms(self, kallsyms_filename, map, filter);
+ err = dso__load_kallsyms(dso, kallsyms_filename, map, filter);
if (err > 0)
pr_debug("Using %s for symbols\n", kallsyms_filename);
@@ -2037,7 +2044,7 @@
if (err > 0) {
if (kallsyms_filename != NULL) {
machine__mmap_name(machine, path, sizeof(path));
- dso__set_long_name(self, strdup(path));
+ dso__set_long_name(dso, strdup(path));
}
map__fixup_start(map);
map__fixup_end(map);
@@ -2090,12 +2097,12 @@
return ret;
}
-size_t machines__fprintf_dsos(struct rb_root *self, FILE *fp)
+size_t machines__fprintf_dsos(struct rb_root *machines, FILE *fp)
{
struct rb_node *nd;
size_t ret = 0;
- for (nd = rb_first(self); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret += __dsos__fprintf(&pos->kernel_dsos, fp);
ret += __dsos__fprintf(&pos->user_dsos, fp);
@@ -2119,18 +2126,20 @@
return ret;
}
-size_t machine__fprintf_dsos_buildid(struct machine *self, FILE *fp, bool with_hits)
+size_t machine__fprintf_dsos_buildid(struct machine *machine, FILE *fp,
+ bool with_hits)
{
- return __dsos__fprintf_buildid(&self->kernel_dsos, fp, with_hits) +
- __dsos__fprintf_buildid(&self->user_dsos, fp, with_hits);
+ return __dsos__fprintf_buildid(&machine->kernel_dsos, fp, with_hits) +
+ __dsos__fprintf_buildid(&machine->user_dsos, fp, with_hits);
}
-size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_hits)
+size_t machines__fprintf_dsos_buildid(struct rb_root *machines,
+ FILE *fp, bool with_hits)
{
struct rb_node *nd;
size_t ret = 0;
- for (nd = rb_first(self); nd; nd = rb_next(nd)) {
+ for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret += machine__fprintf_dsos_buildid(pos, fp, with_hits);
}
@@ -2139,59 +2148,59 @@
struct dso *dso__new_kernel(const char *name)
{
- struct dso *self = dso__new(name ?: "[kernel.kallsyms]");
+ struct dso *dso = dso__new(name ?: "[kernel.kallsyms]");
- if (self != NULL) {
- dso__set_short_name(self, "[kernel]");
- self->kernel = DSO_TYPE_KERNEL;
+ if (dso != NULL) {
+ dso__set_short_name(dso, "[kernel]");
+ dso->kernel = DSO_TYPE_KERNEL;
}
- return self;
+ return dso;
}
static struct dso *dso__new_guest_kernel(struct machine *machine,
const char *name)
{
char bf[PATH_MAX];
- struct dso *self = dso__new(name ?: machine__mmap_name(machine, bf, sizeof(bf)));
-
- if (self != NULL) {
- dso__set_short_name(self, "[guest.kernel]");
- self->kernel = DSO_TYPE_GUEST_KERNEL;
+ struct dso *dso = dso__new(name ?: machine__mmap_name(machine, bf,
+ sizeof(bf)));
+ if (dso != NULL) {
+ dso__set_short_name(dso, "[guest.kernel]");
+ dso->kernel = DSO_TYPE_GUEST_KERNEL;
}
- return self;
+ return dso;
}
-void dso__read_running_kernel_build_id(struct dso *self, struct machine *machine)
+void dso__read_running_kernel_build_id(struct dso *dso, struct machine *machine)
{
char path[PATH_MAX];
if (machine__is_default_guest(machine))
return;
sprintf(path, "%s/sys/kernel/notes", machine->root_dir);
- if (sysfs__read_build_id(path, self->build_id,
- sizeof(self->build_id)) == 0)
- self->has_build_id = true;
+ if (sysfs__read_build_id(path, dso->build_id,
+ sizeof(dso->build_id)) == 0)
+ dso->has_build_id = true;
}
-static struct dso *machine__create_kernel(struct machine *self)
+static struct dso *machine__create_kernel(struct machine *machine)
{
const char *vmlinux_name = NULL;
struct dso *kernel;
- if (machine__is_host(self)) {
+ if (machine__is_host(machine)) {
vmlinux_name = symbol_conf.vmlinux_name;
kernel = dso__new_kernel(vmlinux_name);
} else {
- if (machine__is_default_guest(self))
+ if (machine__is_default_guest(machine))
vmlinux_name = symbol_conf.default_guest_vmlinux_name;
- kernel = dso__new_guest_kernel(self, vmlinux_name);
+ kernel = dso__new_guest_kernel(machine, vmlinux_name);
}
if (kernel != NULL) {
- dso__read_running_kernel_build_id(kernel, self);
- dsos__add(&self->kernel_dsos, kernel);
+ dso__read_running_kernel_build_id(kernel, machine);
+ dsos__add(&machine->kernel_dsos, kernel);
}
return kernel;
}
@@ -2236,41 +2245,43 @@
return args.start;
}
-int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
+int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel)
{
enum map_type type;
- u64 start = machine__get_kernel_start_addr(self);
+ u64 start = machine__get_kernel_start_addr(machine);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
- self->vmlinux_maps[type] = map__new2(start, kernel, type);
- if (self->vmlinux_maps[type] == NULL)
+ machine->vmlinux_maps[type] = map__new2(start, kernel, type);
+ if (machine->vmlinux_maps[type] == NULL)
return -1;
- self->vmlinux_maps[type]->map_ip =
- self->vmlinux_maps[type]->unmap_ip = identity__map_ip;
-
- kmap = map__kmap(self->vmlinux_maps[type]);
- kmap->kmaps = &self->kmaps;
- map_groups__insert(&self->kmaps, self->vmlinux_maps[type]);
+ machine->vmlinux_maps[type]->map_ip =
+ machine->vmlinux_maps[type]->unmap_ip =
+ identity__map_ip;
+ kmap = map__kmap(machine->vmlinux_maps[type]);
+ kmap->kmaps = &machine->kmaps;
+ map_groups__insert(&machine->kmaps,
+ machine->vmlinux_maps[type]);
}
return 0;
}
-void machine__destroy_kernel_maps(struct machine *self)
+void machine__destroy_kernel_maps(struct machine *machine)
{
enum map_type type;
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
- if (self->vmlinux_maps[type] == NULL)
+ if (machine->vmlinux_maps[type] == NULL)
continue;
- kmap = map__kmap(self->vmlinux_maps[type]);
- map_groups__remove(&self->kmaps, self->vmlinux_maps[type]);
+ kmap = map__kmap(machine->vmlinux_maps[type]);
+ map_groups__remove(&machine->kmaps,
+ machine->vmlinux_maps[type]);
if (kmap->ref_reloc_sym) {
/*
* ref_reloc_sym is shared among all maps, so free just
@@ -2284,25 +2295,25 @@
kmap->ref_reloc_sym = NULL;
}
- map__delete(self->vmlinux_maps[type]);
- self->vmlinux_maps[type] = NULL;
+ map__delete(machine->vmlinux_maps[type]);
+ machine->vmlinux_maps[type] = NULL;
}
}
-int machine__create_kernel_maps(struct machine *self)
+int machine__create_kernel_maps(struct machine *machine)
{
- struct dso *kernel = machine__create_kernel(self);
+ struct dso *kernel = machine__create_kernel(machine);
if (kernel == NULL ||
- __machine__create_kernel_maps(self, kernel) < 0)
+ __machine__create_kernel_maps(machine, kernel) < 0)
return -1;
- if (symbol_conf.use_modules && machine__create_modules(self) < 0)
+ if (symbol_conf.use_modules && machine__create_modules(machine) < 0)
pr_debug("Problems creating module maps, continuing anyway...\n");
/*
* Now that we have all the maps created, just set the ->end of them:
*/
- map_groups__fixup_end(&self->kmaps);
+ map_groups__fixup_end(&machine->kmaps);
return 0;
}
@@ -2366,11 +2377,11 @@
return -1;
}
-size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp)
+size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp)
{
int i;
size_t printed = 0;
- struct dso *kdso = self->vmlinux_maps[MAP__FUNCTION]->dso;
+ struct dso *kdso = machine->vmlinux_maps[MAP__FUNCTION]->dso;
if (kdso->has_build_id) {
char filename[PATH_MAX];
@@ -2467,9 +2478,9 @@
symbol_conf.initialized = false;
}
-int machines__create_kernel_maps(struct rb_root *self, pid_t pid)
+int machines__create_kernel_maps(struct rb_root *machines, pid_t pid)
{
- struct machine *machine = machines__findnew(self, pid);
+ struct machine *machine = machines__findnew(machines, pid);
if (machine == NULL)
return -1;
@@ -2520,7 +2531,7 @@
return s;
}
-int machines__create_guest_kernel_maps(struct rb_root *self)
+int machines__create_guest_kernel_maps(struct rb_root *machines)
{
int ret = 0;
struct dirent **namelist = NULL;
@@ -2531,7 +2542,7 @@
if (symbol_conf.default_guest_vmlinux_name ||
symbol_conf.default_guest_modules ||
symbol_conf.default_guest_kallsyms) {
- machines__create_kernel_maps(self, DEFAULT_GUEST_KERNEL_ID);
+ machines__create_kernel_maps(machines, DEFAULT_GUEST_KERNEL_ID);
}
if (symbol_conf.guestmount) {
@@ -2552,7 +2563,7 @@
pr_debug("Can't access file %s\n", path);
goto failure;
}
- machines__create_kernel_maps(self, pid);
+ machines__create_kernel_maps(machines, pid);
}
failure:
free(namelist);
@@ -2561,23 +2572,23 @@
return ret;
}
-void machines__destroy_guest_kernel_maps(struct rb_root *self)
+void machines__destroy_guest_kernel_maps(struct rb_root *machines)
{
- struct rb_node *next = rb_first(self);
+ struct rb_node *next = rb_first(machines);
while (next) {
struct machine *pos = rb_entry(next, struct machine, rb_node);
next = rb_next(&pos->rb_node);
- rb_erase(&pos->rb_node, self);
+ rb_erase(&pos->rb_node, machines);
machine__delete(pos);
}
}
-int machine__load_kallsyms(struct machine *self, const char *filename,
+int machine__load_kallsyms(struct machine *machine, const char *filename,
enum map_type type, symbol_filter_t filter)
{
- struct map *map = self->vmlinux_maps[type];
+ struct map *map = machine->vmlinux_maps[type];
int ret = dso__load_kallsyms(map->dso, filename, map, filter);
if (ret > 0) {
@@ -2587,16 +2598,16 @@
* kernel, with modules between them, fixup the end of all
* sections.
*/
- __map_groups__fixup_end(&self->kmaps, type);
+ __map_groups__fixup_end(&machine->kmaps, type);
}
return ret;
}
-int machine__load_vmlinux_path(struct machine *self, enum map_type type,
+int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
symbol_filter_t filter)
{
- struct map *map = self->vmlinux_maps[type];
+ struct map *map = machine->vmlinux_maps[type];
int ret = dso__load_vmlinux_path(map->dso, map, filter);
if (ret > 0) {
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 713b0b4..242de01 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -62,7 +62,7 @@
char name[0];
};
-void symbol__delete(struct symbol *self);
+void symbol__delete(struct symbol *sym);
struct strlist;
@@ -96,9 +96,9 @@
extern struct symbol_conf symbol_conf;
-static inline void *symbol__priv(struct symbol *self)
+static inline void *symbol__priv(struct symbol *sym)
{
- return ((void *)self) - symbol_conf.priv_size;
+ return ((void *)sym) - symbol_conf.priv_size;
}
struct ref_reloc_sym {
@@ -155,43 +155,45 @@
struct dso *dso__new(const char *name);
struct dso *dso__new_kernel(const char *name);
-void dso__delete(struct dso *self);
+void dso__delete(struct dso *dso);
-int dso__name_len(const struct dso *self);
+int dso__name_len(const struct dso *dso);
-bool dso__loaded(const struct dso *self, enum map_type type);
-bool dso__sorted_by_name(const struct dso *self, enum map_type type);
+bool dso__loaded(const struct dso *dso, enum map_type type);
+bool dso__sorted_by_name(const struct dso *dso, enum map_type type);
-static inline void dso__set_loaded(struct dso *self, enum map_type type)
+static inline void dso__set_loaded(struct dso *dso, enum map_type type)
{
- self->loaded |= (1 << type);
+ dso->loaded |= (1 << type);
}
-void dso__sort_by_name(struct dso *self, enum map_type type);
+void dso__sort_by_name(struct dso *dso, enum map_type type);
struct dso *__dsos__findnew(struct list_head *head, const char *name);
-int dso__load(struct dso *self, struct map *map, symbol_filter_t filter);
-int dso__load_vmlinux(struct dso *self, struct map *map,
+int dso__load(struct dso *dso, struct map *map, symbol_filter_t filter);
+int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, symbol_filter_t filter);
-int dso__load_vmlinux_path(struct dso *self, struct map *map,
+int dso__load_vmlinux_path(struct dso *dso, struct map *map,
symbol_filter_t filter);
-int dso__load_kallsyms(struct dso *self, const char *filename, struct map *map,
+int dso__load_kallsyms(struct dso *dso, const char *filename, struct map *map,
symbol_filter_t filter);
-int machine__load_kallsyms(struct machine *self, const char *filename,
+int machine__load_kallsyms(struct machine *machine, const char *filename,
enum map_type type, symbol_filter_t filter);
-int machine__load_vmlinux_path(struct machine *self, enum map_type type,
+int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
symbol_filter_t filter);
size_t __dsos__fprintf(struct list_head *head, FILE *fp);
-size_t machine__fprintf_dsos_buildid(struct machine *self, FILE *fp, bool with_hits);
-size_t machines__fprintf_dsos(struct rb_root *self, FILE *fp);
-size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_hits);
-
-size_t dso__fprintf_buildid(struct dso *self, FILE *fp);
-size_t dso__fprintf_symbols_by_name(struct dso *self, enum map_type type, FILE *fp);
-size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp);
+size_t machine__fprintf_dsos_buildid(struct machine *machine,
+ FILE *fp, bool with_hits);
+size_t machines__fprintf_dsos(struct rb_root *machines, FILE *fp);
+size_t machines__fprintf_dsos_buildid(struct rb_root *machines,
+ FILE *fp, bool with_hits);
+size_t dso__fprintf_buildid(struct dso *dso, FILE *fp);
+size_t dso__fprintf_symbols_by_name(struct dso *dso,
+ enum map_type type, FILE *fp);
+size_t dso__fprintf(struct dso *dso, enum map_type type, FILE *fp);
enum symtab_type {
SYMTAB__KALLSYMS = 0,
@@ -207,34 +209,36 @@
SYMTAB__NOT_FOUND,
};
-char dso__symtab_origin(const struct dso *self);
-void dso__set_long_name(struct dso *self, char *name);
-void dso__set_build_id(struct dso *self, void *build_id);
-void dso__read_running_kernel_build_id(struct dso *self, struct machine *machine);
-struct symbol *dso__find_symbol(struct dso *self, enum map_type type, u64 addr);
-struct symbol *dso__find_symbol_by_name(struct dso *self, enum map_type type,
+char dso__symtab_origin(const struct dso *dso);
+void dso__set_long_name(struct dso *dso, char *name);
+void dso__set_build_id(struct dso *dso, void *build_id);
+void dso__read_running_kernel_build_id(struct dso *dso,
+ struct machine *machine);
+struct symbol *dso__find_symbol(struct dso *dso, enum map_type type,
+ u64 addr);
+struct symbol *dso__find_symbol_by_name(struct dso *dso, enum map_type type,
const char *name);
int filename__read_build_id(const char *filename, void *bf, size_t size);
int sysfs__read_build_id(const char *filename, void *bf, size_t size);
bool __dsos__read_build_ids(struct list_head *head, bool with_hits);
-int build_id__sprintf(const u8 *self, int len, char *bf);
+int build_id__sprintf(const u8 *build_id, int len, char *bf);
int kallsyms__parse(const char *filename, void *arg,
int (*process_symbol)(void *arg, const char *name,
char type, u64 start, u64 end));
-void machine__destroy_kernel_maps(struct machine *self);
-int __machine__create_kernel_maps(struct machine *self, struct dso *kernel);
-int machine__create_kernel_maps(struct machine *self);
+void machine__destroy_kernel_maps(struct machine *machine);
+int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel);
+int machine__create_kernel_maps(struct machine *machine);
-int machines__create_kernel_maps(struct rb_root *self, pid_t pid);
-int machines__create_guest_kernel_maps(struct rb_root *self);
-void machines__destroy_guest_kernel_maps(struct rb_root *self);
+int machines__create_kernel_maps(struct rb_root *machines, pid_t pid);
+int machines__create_guest_kernel_maps(struct rb_root *machines);
+void machines__destroy_guest_kernel_maps(struct rb_root *machines);
int symbol__init(void);
void symbol__exit(void);
bool symbol_type__is_a(char symbol_type, enum map_type map_type);
-size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp);
+size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp);
#endif /* __PERF_SYMBOL */
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 0a7ed5b..1e88485 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -2187,7 +2187,6 @@
{ "TASKLET_SOFTIRQ", 6 },
{ "SCHED_SOFTIRQ", 7 },
{ "HRTIMER_SOFTIRQ", 8 },
- { "RCU_SOFTIRQ", 9 },
{ "HRTIMER_NORESTART", 0 },
{ "HRTIMER_RESTART", 1 },